arm64: dts: qcom: pm6150: Add resin and rtc nodes

Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device, both disabled by default.

Signed-off-by: David Wronek <davidwronek@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230824091737.75813-3-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 7d4d1f2767ed6afe1c2124616cd3db493bcc97cc..ddbaf7280b03075aca5d9b5c984108e7d6cb2fdb 100644 (file)
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@
                                bias-pull-up;
                                linux,code = <KEY_POWER>;
                        };
+
+                       pm6150_resin: resin {
+                               compatible = "qcom,pm8941-resin";
+                               interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+                               debounce = <15625>;
+                               bias-pull-up;
+                               status = "disabled";
+                       };
                };
 
                pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,14 @@
                        status = "disabled";
                };
 
+               pm6150_rtc: rtc@6000 {
+                       compatible = "qcom,pm8941-rtc";
+                       reg = <0x6000>, <0x6100>;
+                       reg-names = "rtc", "alarm";
+                       interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
+                       status = "disabled";
+               };
+
                pm6150_gpios: gpio@c000 {
                        compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
                        reg = <0xc000>;