ALSA: es1938: Use standard printk helpers
authorTakashi Iwai <tiwai@suse.de>
Tue, 25 Feb 2014 13:21:18 +0000 (14:21 +0100)
committerTakashi Iwai <tiwai@suse.de>
Wed, 26 Feb 2014 15:45:17 +0000 (16:45 +0100)
Convert with dev_err() and co from snd_printk(), etc.
Some debug prints are replaced with dev_dbg(), too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
sound/pci/es1938.c

index 33489bcc0aff8cdc10d8f6463944e67ee9028881..34d95bf916b5f2c51e9658ab6b363f611f05b2af 100644 (file)
@@ -254,7 +254,6 @@ MODULE_DEVICE_TABLE(pci, snd_es1938_ids);
 #define WRITE_LOOP_TIMEOUT     0x10000
 #define GET_LOOP_TIMEOUT       0x01000
 
-#undef REG_DEBUG
 /* -----------------------------------------------------------------
  * Write to a mixer register
  * -----------------------------------------------------------------*/
@@ -265,9 +264,7 @@ static void snd_es1938_mixer_write(struct es1938 *chip, unsigned char reg, unsig
        outb(reg, SLSB_REG(chip, MIXERADDR));
        outb(val, SLSB_REG(chip, MIXERDATA));
        spin_unlock_irqrestore(&chip->mixer_lock, flags);
-#ifdef REG_DEBUG
-       snd_printk(KERN_DEBUG "Mixer reg %02x set to %02x\n", reg, val);
-#endif
+       dev_dbg(chip->card->dev, "Mixer reg %02x set to %02x\n", reg, val);
 }
 
 /* -----------------------------------------------------------------
@@ -281,9 +278,7 @@ static int snd_es1938_mixer_read(struct es1938 *chip, unsigned char reg)
        outb(reg, SLSB_REG(chip, MIXERADDR));
        data = inb(SLSB_REG(chip, MIXERDATA));
        spin_unlock_irqrestore(&chip->mixer_lock, flags);
-#ifdef REG_DEBUG
-       snd_printk(KERN_DEBUG "Mixer reg %02x now is %02x\n", reg, data);
-#endif
+       dev_dbg(chip->card->dev, "Mixer reg %02x now is %02x\n", reg, data);
        return data;
 }
 
@@ -302,10 +297,9 @@ static int snd_es1938_mixer_bits(struct es1938 *chip, unsigned char reg,
        if (val != oval) {
                new = (old & ~mask) | (val & mask);
                outb(new, SLSB_REG(chip, MIXERDATA));
-#ifdef REG_DEBUG
-               snd_printk(KERN_DEBUG "Mixer reg %02x was %02x, set to %02x\n",
+               dev_dbg(chip->card->dev,
+                       "Mixer reg %02x was %02x, set to %02x\n",
                           reg, old, new);
-#endif
        }
        spin_unlock_irqrestore(&chip->mixer_lock, flags);
        return oval;
@@ -324,7 +318,8 @@ static void snd_es1938_write_cmd(struct es1938 *chip, unsigned char cmd)
                        return;
                }
        }
-       printk(KERN_ERR "snd_es1938_write_cmd timeout (0x02%x/0x02%x)\n", cmd, v);
+       dev_err(chip->card->dev,
+               "snd_es1938_write_cmd timeout (0x02%x/0x02%x)\n", cmd, v);
 }
 
 /* -----------------------------------------------------------------
@@ -337,7 +332,7 @@ static int snd_es1938_get_byte(struct es1938 *chip)
        for (i = GET_LOOP_TIMEOUT; i; i--)
                if ((v = inb(SLSB_REG(chip, STATUS))) & 0x80)
                        return inb(SLSB_REG(chip, READDATA));
-       snd_printk(KERN_ERR "get_byte timeout: status 0x02%x\n", v);
+       dev_err(chip->card->dev, "get_byte timeout: status 0x02%x\n", v);
        return -ENODEV;
 }
 
@@ -351,9 +346,7 @@ static void snd_es1938_write(struct es1938 *chip, unsigned char reg, unsigned ch
        snd_es1938_write_cmd(chip, reg);
        snd_es1938_write_cmd(chip, val);
        spin_unlock_irqrestore(&chip->reg_lock, flags);
-#ifdef REG_DEBUG
-       snd_printk(KERN_DEBUG "Reg %02x set to %02x\n", reg, val);
-#endif
+       dev_dbg(chip->card->dev, "Reg %02x set to %02x\n", reg, val);
 }
 
 /* -----------------------------------------------------------------
@@ -368,9 +361,7 @@ static unsigned char snd_es1938_read(struct es1938 *chip, unsigned char reg)
        snd_es1938_write_cmd(chip, reg);
        val = snd_es1938_get_byte(chip);
        spin_unlock_irqrestore(&chip->reg_lock, flags);
-#ifdef REG_DEBUG
-       snd_printk(KERN_DEBUG "Reg %02x now is %02x\n", reg, val);
-#endif
+       dev_dbg(chip->card->dev, "Reg %02x now is %02x\n", reg, val);
        return val;
 }
 
@@ -391,10 +382,8 @@ static int snd_es1938_bits(struct es1938 *chip, unsigned char reg, unsigned char
                snd_es1938_write_cmd(chip, reg);
                new = (old & ~mask) | (val & mask);
                snd_es1938_write_cmd(chip, new);
-#ifdef REG_DEBUG
-               snd_printk(KERN_DEBUG "Reg %02x was %02x, set to %02x\n",
+               dev_dbg(chip->card->dev, "Reg %02x was %02x, set to %02x\n",
                           reg, old, new);
-#endif
        }
        spin_unlock_irqrestore(&chip->reg_lock, flags);
        return oval;
@@ -416,7 +405,7 @@ static void snd_es1938_reset(struct es1938 *chip)
                                goto __next;
                }
        }
-       snd_printk(KERN_ERR "ESS Solo-1 reset failed\n");
+       dev_err(chip->card->dev, "ESS Solo-1 reset failed\n");
 
      __next:
        snd_es1938_write_cmd(chip, ESS_CMD_ENABLEEXT);
@@ -1504,16 +1493,15 @@ static int es1938_resume(struct device *dev)
        pci_set_power_state(pci, PCI_D0);
        pci_restore_state(pci);
        if (pci_enable_device(pci) < 0) {
-               printk(KERN_ERR "es1938: pci_enable_device failed, "
-                      "disabling device\n");
+               dev_err(dev, "pci_enable_device failed, disabling device\n");
                snd_card_disconnect(card);
                return -EIO;
        }
 
        if (request_irq(pci->irq, snd_es1938_interrupt,
                        IRQF_SHARED, KBUILD_MODNAME, chip)) {
-               printk(KERN_ERR "es1938: unable to grab IRQ %d, "
-                      "disabling device\n", pci->irq);
+               dev_err(dev, "unable to grab IRQ %d, disabling device\n",
+                       pci->irq);
                snd_card_disconnect(card);
                return -EIO;
        }
@@ -1545,7 +1533,8 @@ static int snd_es1938_create_gameport(struct es1938 *chip)
 
        chip->gameport = gp = gameport_allocate_port();
        if (!gp) {
-               printk(KERN_ERR "es1938: cannot allocate memory for gameport\n");
+               dev_err(chip->card->dev,
+                       "cannot allocate memory for gameport\n");
                return -ENOMEM;
        }
 
@@ -1612,7 +1601,8 @@ static int snd_es1938_create(struct snd_card *card,
         /* check, if we can restrict PCI DMA transfers to 24 bits */
        if (pci_set_dma_mask(pci, DMA_BIT_MASK(24)) < 0 ||
            pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(24)) < 0) {
-               snd_printk(KERN_ERR "architecture does not support 24bit PCI busmaster DMA\n");
+               dev_err(card->dev,
+                       "architecture does not support 24bit PCI busmaster DMA\n");
                pci_disable_device(pci);
                 return -ENXIO;
         }
@@ -1639,15 +1629,14 @@ static int snd_es1938_create(struct snd_card *card,
        chip->game_port = pci_resource_start(pci, 4);
        if (request_irq(pci->irq, snd_es1938_interrupt, IRQF_SHARED,
                        KBUILD_MODNAME, chip)) {
-               snd_printk(KERN_ERR "unable to grab IRQ %d\n", pci->irq);
+               dev_err(card->dev, "unable to grab IRQ %d\n", pci->irq);
                snd_es1938_free(chip);
                return -EBUSY;
        }
        chip->irq = pci->irq;
-#ifdef ES1938_DDEBUG
-       snd_printk(KERN_DEBUG "create: io: 0x%lx, sb: 0x%lx, vc: 0x%lx, mpu: 0x%lx, game: 0x%lx\n",
+       dev_dbg(card->dev,
+               "create: io: 0x%lx, sb: 0x%lx, vc: 0x%lx, mpu: 0x%lx, game: 0x%lx\n",
                   chip->io_port, chip->sb_port, chip->vc_port, chip->mpu_port, chip->game_port);
-#endif
 
        chip->ddma_port = chip->vc_port + 0x00;         /* fix from Thomas Sailer */
 
@@ -1673,21 +1662,22 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id)
 
        status = inb(SLIO_REG(chip, IRQCONTROL));
 #if 0
-       printk(KERN_DEBUG "Es1938debug - interrupt status: =0x%x\n", status);
+       dev_dbg(chip->card->dev,
+               "Es1938debug - interrupt status: =0x%x\n", status);
 #endif
        
        /* AUDIO 1 */
        if (status & 0x10) {
 #if 0
-                printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 1 interrupt\n");
-               printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 1 DMAC DMA count: %u\n",
                       inw(SLDM_REG(chip, DMACOUNT)));
-               printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 1 DMAC DMA base: %u\n",
                       inl(SLDM_REG(chip, DMAADDR)));
-               printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 1 DMAC DMA status: 0x%x\n",
                       inl(SLDM_REG(chip, DMASTATUS)));
 #endif
@@ -1703,12 +1693,12 @@ static irqreturn_t snd_es1938_interrupt(int irq, void *dev_id)
        /* AUDIO 2 */
        if (status & 0x20) {
 #if 0
-                printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 2 interrupt\n");
-               printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 2 DMAC DMA count: %u\n",
                       inw(SLIO_REG(chip, AUDIO2DMACOUNT)));
-               printk(KERN_DEBUG
+               dev_dbg(chip->card->dev,
                       "Es1938debug - AUDIO channel 2 DMAC DMA base: %u\n",
                       inl(SLIO_REG(chip, AUDIO2DMAADDR)));
 
@@ -1842,7 +1832,7 @@ static int snd_es1938_probe(struct pci_dev *pci,
                            SLSB_REG(chip, FMLOWADDR),
                            SLSB_REG(chip, FMHIGHADDR),
                            OPL3_HW_OPL3, 1, &opl3) < 0) {
-               printk(KERN_ERR "es1938: OPL3 not detected at 0x%lx\n",
+               dev_err(card->dev, "OPL3 not detected at 0x%lx\n",
                           SLSB_REG(chip, FMLOWADDR));
        } else {
                if ((err = snd_opl3_timer_new(opl3, 0, 1)) < 0) {
@@ -1858,7 +1848,7 @@ static int snd_es1938_probe(struct pci_dev *pci,
                                chip->mpu_port,
                                MPU401_INFO_INTEGRATED | MPU401_INFO_IRQ_HOOK,
                                -1, &chip->rmidi) < 0) {
-               printk(KERN_ERR "es1938: unable to initialize MPU-401\n");
+               dev_err(card->dev, "unable to initialize MPU-401\n");
        } else {
                // this line is vital for MIDI interrupt handling on ess-solo1
                // andreas@flying-snail.de