[X25]: Fast select with no restriction on response
authorShaun Pereira <spereira@tusc.com.au>
Thu, 23 Jun 2005 05:16:17 +0000 (22:16 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 23 Jun 2005 05:16:17 +0000 (22:16 -0700)
This patch is a follow up to patch 1 regarding "Selective Sub Address
matching with call user data".  It allows use of the Fast-Select-Acceptance
optional user facility for X.25.

This patch just implements fast select with no restriction on response
(NRR).  What this means (according to ITU-T Recomendation 10/96 section
6.16) is that if in an incoming call packet, the relevant facility bits are
set for fast-select-NRR, then the called DTE can issue a direct response to
the incoming packet using a call-accepted packet that contains
call-user-data.  This patch allows such a response.

The called DTE can also respond with a clear-request packet that contains
call-user-data.  However, this feature is currently not implemented by the
patch.

How is Fast Select Acceptance used?
By default, the system does not allow fast select acceptance (as before).
To enable a response to fast select acceptance,
After a listen socket in created and bound as follows
socket(AF_X25, SOCK_SEQPACKET, 0);
bind(call_soc, (struct sockaddr *)&locl_addr, sizeof(locl_addr));
but before a listen system call is made, the following ioctl should be used.
ioctl(call_soc,SIOCX25CALLACCPTAPPRV);
Now the listen system call can be made
listen(call_soc, 4);
After this, an incoming-call packet will be accepted, but no call-accepted
packet will be sent back until the following system call is made on the socket
that accepts the call
ioctl(vc_soc,SIOCX25SENDCALLACCPT);
The network (or cisco xot router used for testing here) will allow the
application server's call-user-data in the call-accepted packet,
provided the call-request was made with Fast-select NRR.

Signed-off-by: Shaun Pereira <spereira@tusc.com.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
include/linux/x25.h
include/net/x25.h
net/x25/af_x25.c
net/x25/x25_facilities.c
net/x25/x25_subr.c

index 6f43b3d202485a2bfa024c444b14bbf8640a1969..16d44931afa04b84b6d5e87a5fdd191474af1cb9 100644 (file)
@@ -19,6 +19,8 @@
 #define        SIOCX25SCALLUSERDATA    (SIOCPROTOPRIVATE + 5)
 #define        SIOCX25GCAUSEDIAG       (SIOCPROTOPRIVATE + 6)
 #define SIOCX25SCUDMATCHLEN    (SIOCPROTOPRIVATE + 7)
+#define SIOCX25CALLACCPTAPPRV   (SIOCPROTOPRIVATE + 8)
+#define SIOCX25SENDCALLACCPT    (SIOCPROTOPRIVATE + 9)
 
 /*
  *     Values for {get,set}sockopt.
index 9dd70dd4a9b7609118d0467de3098501ff3643e1..8b39b98876e89bc4dd2fdf89be43c5d608d5bcee 100644 (file)
@@ -79,6 +79,8 @@ enum {
 #define        X25_DEFAULT_PACKET_SIZE X25_PS128               /* Default Packet Size */
 #define        X25_DEFAULT_THROUGHPUT  0x0A                    /* Deafult Throughput */
 #define        X25_DEFAULT_REVERSE     0x00                    /* Default Reverse Charging */
+#define X25_DENY_ACCPT_APPRV   0x01                    /* Default value */
+#define X25_ALLOW_ACCPT_APPRV  0x00                    /* Control enabled */
 
 #define X25_SMODULUS           8
 #define        X25_EMODULUS            128
@@ -94,7 +96,7 @@ enum {
 #define        X25_FAC_CLASS_C         0x80
 #define        X25_FAC_CLASS_D         0xC0
 
-#define        X25_FAC_REVERSE         0x01
+#define        X25_FAC_REVERSE         0x01                    /* also fast select */
 #define        X25_FAC_THROUGHPUT      0x02
 #define        X25_FAC_PACKET_SIZE     0x42
 #define        X25_FAC_WINDOW_SIZE     0x43
@@ -135,7 +137,7 @@ struct x25_sock {
        struct x25_address      source_addr, dest_addr;
        struct x25_neigh        *neighbour;
        unsigned int            lci, cudmatchlength;
-       unsigned char           state, condition, qbitincl, intflag;
+       unsigned char           state, condition, qbitincl, intflag, accptapprv;
        unsigned short          vs, vr, va, vl;
        unsigned long           t2, t21, t22, t23;
        unsigned short          fraglen;
index e17d84a55d5ebb8885f4129125e0d34de0993887..04bec047fa9ab5910d7ef7c134e734f178e42aa0 100644 (file)
@@ -31,6 +31,8 @@
  *                                     x25_proc.c, using seq_file
  *     2005-04-02      Shaun Pereira   Selective sub address matching
  *                                     with call user data
+ *     2005-04-15      Shaun Pereira   Fast select with no restriction on
+ *                                     response
  */
 
 #include <linux/config.h>
@@ -502,6 +504,8 @@ static int x25_create(struct socket *sock, int protocol)
        x25->t2    = sysctl_x25_ack_holdback_timeout;
        x25->state = X25_STATE_0;
        x25->cudmatchlength = 0;
+       x25->accptapprv = X25_DENY_ACCPT_APPRV;         /* normally no cud  */
+                                                       /* on call accept   */
 
        x25->facilities.winsize_in  = X25_DEFAULT_WINDOW_SIZE;
        x25->facilities.winsize_out = X25_DEFAULT_WINDOW_SIZE;
@@ -551,6 +555,7 @@ static struct sock *x25_make_new(struct sock *osk)
        x25->facilities = ox25->facilities;
        x25->qbitincl   = ox25->qbitincl;
        x25->cudmatchlength = ox25->cudmatchlength;
+       x25->accptapprv = ox25->accptapprv;
 
        x25_init_timers(sk);
 out:
@@ -900,9 +905,11 @@ int x25_rx_call_request(struct sk_buff *skb, struct x25_neigh *nb,
        makex25->vc_facil_mask &= ~X25_MASK_REVERSE;
        makex25->cudmatchlength = x25_sk(sk)->cudmatchlength;
 
-       x25_write_internal(make, X25_CALL_ACCEPTED);
-
-       makex25->state = X25_STATE_3;
+       /* Normally all calls are accepted immediatly */
+       if(makex25->accptapprv & X25_DENY_ACCPT_APPRV) {
+               x25_write_internal(make, X25_CALL_ACCEPTED);
+               makex25->state = X25_STATE_3;
+       }
 
        /*
         *      Incoming Call User Data.
@@ -1294,7 +1301,8 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
                        if (facilities.throughput < 0x03 ||
                            facilities.throughput > 0xDD)
                                break;
-                       if (facilities.reverse && facilities.reverse != 1)
+                       if (facilities.reverse &&
+                               (facilities.reverse | 0x81)!= 0x81)
                                break;
                        x25->facilities = facilities;
                        rc = 0;
@@ -1348,6 +1356,27 @@ static int x25_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
                        break;
                }
 
+               case SIOCX25CALLACCPTAPPRV: {
+                       rc = -EINVAL;
+                       if (sk->sk_state != TCP_CLOSE)
+                               break;
+                       x25->accptapprv = X25_ALLOW_ACCPT_APPRV;
+                       rc = 0;
+                       break;
+               }
+
+               case SIOCX25SENDCALLACCPT:  {
+                       rc = -EINVAL;
+                       if (sk->sk_state != TCP_ESTABLISHED)
+                               break;
+                       if (x25->accptapprv)    /* must call accptapprv above */
+                               break;
+                       x25_write_internal(sk, X25_CALL_ACCEPTED);
+                       x25->state = X25_STATE_3;
+                       rc = 0;
+                       break;
+               }
+
                default:
                        rc = dev_ioctl(cmd, argp);
                        break;
index a21bdb95f9a8bfa81e7b05c99889d03406963905..54278b962f4ce1403d89e560196065811b7fc369 100644 (file)
@@ -17,6 +17,8 @@
  *     X.25 001        Split from x25_subr.c
  *     mar/20/00       Daniela Squassoni Disabling/enabling of facilities 
  *                                       negotiation.
+ *     apr/14/05       Shaun Pereira - Allow fast select with no restriction
+ *                                     on response.
  */
 
 #include <linux/kernel.h>
@@ -43,9 +45,31 @@ int x25_parse_facilities(struct sk_buff *skb,
                case X25_FAC_CLASS_A:
                        switch (*p) {
                        case X25_FAC_REVERSE:
-                               facilities->reverse = p[1] & 0x01;
-                               *vc_fac_mask |= X25_MASK_REVERSE;
-                               break;
+                               if((p[1] & 0x81) == 0x81) {
+                                       facilities->reverse = p[1] & 0x81;
+                                       *vc_fac_mask |= X25_MASK_REVERSE;
+                                       break;
+                               }
+
+                               if((p[1] & 0x01) == 0x01) {
+                                       facilities->reverse = p[1] & 0x01;
+                                       *vc_fac_mask |= X25_MASK_REVERSE;
+                                       break;
+                               }
+
+                               if((p[1] & 0x80) == 0x80) {
+                                       facilities->reverse = p[1] & 0x80;
+                                       *vc_fac_mask |= X25_MASK_REVERSE;
+                                       break;
+                               }
+
+                               if(p[1] == 0x00) {
+                                       facilities->reverse
+                                               = X25_DEFAULT_REVERSE;
+                                       *vc_fac_mask |= X25_MASK_REVERSE;
+                                       break;
+                               }
+
                        case X25_FAC_THROUGHPUT:
                                facilities->throughput = p[1];
                                *vc_fac_mask |= X25_MASK_THROUGHPUT;
@@ -122,7 +146,7 @@ int x25_create_facilities(unsigned char *buffer,
 
        if (facilities->reverse && (facil_mask & X25_MASK_REVERSE)) {
                *p++ = X25_FAC_REVERSE;
-               *p++ = !!facilities->reverse;
+               *p++ = facilities->reverse;
        }
 
        if (facilities->throughput && (facil_mask & X25_MASK_THROUGHPUT)) {
@@ -171,7 +195,7 @@ int x25_negotiate_facilities(struct sk_buff *skb, struct sock *sk,
        /*
         *      They want reverse charging, we won't accept it.
         */
-       if (theirs.reverse && ours->reverse) {
+       if ((theirs.reverse & 0x01 ) && (ours->reverse & 0x01)) {
                SOCK_DEBUG(sk, "X.25: rejecting reverse charging request");
                return -1;
        }
index c349bbd61684ec9272ed0a24c1724e84d041ee10..7fd872ad0c20a2acbb709e5cb8ca9c22bae7ebac 100644 (file)
@@ -19,6 +19,8 @@
  *     mar/20/00       Daniela Squassoni Disabling/enabling of facilities
  *                                       negotiation.
  *     jun/24/01       Arnaldo C. Melo   use skb_queue_purge, cleanups
+ *     apr/04/15       Shaun Pereira           Fast select with no
+ *                                             restriction on response.
  */
 
 #include <linux/kernel.h>
@@ -127,8 +129,12 @@ void x25_write_internal(struct sock *sk, int frametype)
                        len += 1 + X25_ADDR_LEN + X25_MAX_FAC_LEN +
                               X25_MAX_CUD_LEN;
                        break;
-               case X25_CALL_ACCEPTED:
-                       len += 1 + X25_MAX_FAC_LEN + X25_MAX_CUD_LEN;
+               case X25_CALL_ACCEPTED: /* fast sel with no restr on resp */
+                       if(x25->facilities.reverse & 0x80) {
+                               len += 1 + X25_MAX_FAC_LEN + X25_MAX_CUD_LEN;
+                       } else {
+                               len += 1 + X25_MAX_FAC_LEN;
+                       }
                        break;
                case X25_CLEAR_REQUEST:
                case X25_RESET_REQUEST:
@@ -203,9 +209,16 @@ void x25_write_internal(struct sock *sk, int frametype)
                                                        x25->vc_facil_mask);
                        dptr    = skb_put(skb, len);
                        memcpy(dptr, facilities, len);
-                       dptr = skb_put(skb, x25->calluserdata.cudlength);
-                       memcpy(dptr, x25->calluserdata.cuddata,
-                              x25->calluserdata.cudlength);
+
+                       /* fast select with no restriction on response
+                               allows call user data. Userland must
+                               ensure it is ours and not theirs */
+                       if(x25->facilities.reverse & 0x80) {
+                               dptr = skb_put(skb,
+                                       x25->calluserdata.cudlength);
+                               memcpy(dptr, x25->calluserdata.cuddata,
+                                      x25->calluserdata.cudlength);
+                       }
                        x25->calluserdata.cudlength = 0;
                        break;