[media] em28xx: push mutex down to extensions on .fini callback
authorMauro Carvalho Chehab <m.chehab@samsung.com>
Mon, 13 Jan 2014 05:53:44 +0000 (02:53 -0300)
committerMauro Carvalho Chehab <m.chehab@samsung.com>
Tue, 14 Jan 2014 16:39:32 +0000 (14:39 -0200)
Avoid circular mutex lock by pushing the dev->lock to the .fini
callback on each extension.

As em28xx-dvb, em28xx-alsa and em28xx-rc have their own data
structures, and don't touch at the common structure during .fini,
only em28xx-v4l needs to be locked.

[   90.994317] ======================================================
[   90.994356] [ INFO: possible circular locking dependency detected ]
[   90.994395] 3.13.0-rc1+ #24 Not tainted
[   90.994427] -------------------------------------------------------
[   90.994458] khubd/54 is trying to acquire lock:
[   90.994490]  (&card->controls_rwsem){++++.+}, at: [<ffffffffa0177b08>] snd_ctl_dev_free+0x28/0x60 [snd]
[   90.994656]
[   90.994656] but task is already holding lock:
[   90.994688]  (&dev->lock){+.+.+.}, at: [<ffffffffa040db81>] em28xx_close_extension+0x31/0x90 [em28xx]
[   90.994843]
[   90.994843] which lock already depends on the new lock.
[   90.994843]
[   90.994874]
[   90.994874] the existing dependency chain (in reverse order) is:
[   90.994905]
-> #1 (&dev->lock){+.+.+.}:
[   90.995057]        [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330
[   90.995121]        [<ffffffff810b9f82>] lock_acquire+0xa2/0x120
[   90.995182]        [<ffffffff816a5b6c>] mutex_lock_nested+0x5c/0x3c0
[   90.995245]        [<ffffffffa0422cca>] em28xx_vol_put_mute+0x1ba/0x1d0 [em28xx_alsa]
[   90.995309]        [<ffffffffa017813d>] snd_ctl_elem_write+0xfd/0x140 [snd]
[   90.995376]        [<ffffffffa01791c2>] snd_ctl_ioctl+0xe2/0x810 [snd]
[   90.995442]        [<ffffffff811db8b0>] do_vfs_ioctl+0x300/0x520
[   90.995504]        [<ffffffff811dbb51>] SyS_ioctl+0x81/0xa0
[   90.995568]        [<ffffffff816b1929>] system_call_fastpath+0x16/0x1b
[   90.995630]
-> #0 (&card->controls_rwsem){++++.+}:
[   90.995780]        [<ffffffff810b7a47>] check_prevs_add+0x947/0x950
[   90.995841]        [<ffffffff810b8fa3>] __lock_acquire+0xb43/0x1330
[   90.995901]        [<ffffffff810b9f82>] lock_acquire+0xa2/0x120
[   90.995962]        [<ffffffff816a762b>] down_write+0x3b/0xa0
[   90.996022]        [<ffffffffa0177b08>] snd_ctl_dev_free+0x28/0x60 [snd]
[   90.996088]        [<ffffffffa017a255>] snd_device_free+0x65/0x140 [snd]
[   90.996154]        [<ffffffffa017a751>] snd_device_free_all+0x61/0xa0 [snd]
[   90.996219]        [<ffffffffa0173af4>] snd_card_do_free+0x14/0x130 [snd]
[   90.996283]        [<ffffffffa0173f14>] snd_card_free+0x84/0x90 [snd]
[   90.996349]        [<ffffffffa0423397>] em28xx_audio_fini+0x97/0xb0 [em28xx_alsa]
[   90.996411]        [<ffffffffa040dba6>] em28xx_close_extension+0x56/0x90 [em28xx]
[   90.996475]        [<ffffffffa040f639>] em28xx_usb_disconnect+0x79/0x90 [em28xx]
[   90.996539]        [<ffffffff814a06e7>] usb_unbind_interface+0x67/0x1d0
[   90.996620]        [<ffffffff8142920f>] __device_release_driver+0x7f/0xf0
[   90.996682]        [<ffffffff814292a5>] device_release_driver+0x25/0x40
[   90.996742]        [<ffffffff81428b0c>] bus_remove_device+0x11c/0x1a0
[   90.996801]        [<ffffffff81425536>] device_del+0x136/0x1d0
[   90.996863]        [<ffffffff8149e0c0>] usb_disable_device+0xb0/0x290
[   90.996923]        [<ffffffff814930c5>] usb_disconnect+0xb5/0x1d0
[   90.996984]        [<ffffffff81495ab6>] hub_port_connect_change+0xd6/0xad0
[   90.997044]        [<ffffffff814967c3>] hub_events+0x313/0x9b0
[   90.997105]        [<ffffffff81496e95>] hub_thread+0x35/0x170
[   90.997165]        [<ffffffff8108ea2f>] kthread+0xff/0x120
[   90.997226]        [<ffffffff816b187c>] ret_from_fork+0x7c/0xb0
[   90.997287]
[   90.997287] other info that might help us debug this:
[   90.997287]
[   90.997318]  Possible unsafe locking scenario:
[   90.997318]
[   90.997348]        CPU0                    CPU1
[   90.997378]        ----                    ----
[   90.997408]   lock(&dev->lock);
[   90.997497]                                lock(&card->controls_rwsem);
[   90.997607]                                lock(&dev->lock);
[   90.997697]   lock(&card->controls_rwsem);
[   90.997786]
[   90.997786]  *** DEADLOCK ***
[   90.997786]
[   90.997817] 5 locks held by khubd/54:
[   90.997847]  #0:  (&__lockdep_no_validate__){......}, at: [<ffffffff81496564>] hub_events+0xb4/0x9b0
[   90.998025]  #1:  (&__lockdep_no_validate__){......}, at: [<ffffffff81493076>] usb_disconnect+0x66/0x1d0
[   90.998204]  #2:  (&__lockdep_no_validate__){......}, at: [<ffffffff8142929d>] device_release_driver+0x1d/0x40
[   90.998383]  #3:  (em28xx_devlist_mutex){+.+.+.}, at: [<ffffffffa040db77>] em28xx_close_extension+0x27/0x90 [em28xx]
[   90.998567]  #4:  (&dev->lock){+.+.+.}, at: [<ffffffffa040db81>] em28xx_close_extension+0x31/0x90 [em28xx]

Reviewed-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
drivers/media/usb/em28xx/em28xx-core.c
drivers/media/usb/em28xx/em28xx-video.c

index b6dc3327c51c8edb316328857a59e113f7726d1f..898fb9bd88a279db1cec20f44dc952eb4a721254 100644 (file)
@@ -1099,12 +1099,10 @@ void em28xx_close_extension(struct em28xx *dev)
        const struct em28xx_ops *ops = NULL;
 
        mutex_lock(&em28xx_devlist_mutex);
-       mutex_lock(&dev->lock);
        list_for_each_entry(ops, &em28xx_extension_devlist, next) {
                if (ops->fini)
                        ops->fini(dev);
        }
-       mutex_unlock(&dev->lock);
        list_del(&dev->devlist);
        mutex_unlock(&em28xx_devlist_mutex);
 }
index 1486d47409738ccf4f9a4ed2697f12b3d3266399..aabcafbdab46cdc025b5fbbccca447c9631d22dd 100644 (file)
@@ -1896,6 +1896,8 @@ static int em28xx_v4l2_fini(struct em28xx *dev)
 
        em28xx_info("Closing video extension");
 
+       mutex_lock(&dev->lock);
+
        v4l2_device_disconnect(&dev->v4l2_dev);
 
        em28xx_uninit_usb_xfer(dev, EM28XX_ANALOG_MODE);
@@ -1926,6 +1928,7 @@ static int em28xx_v4l2_fini(struct em28xx *dev)
 
        if (dev->users)
                em28xx_warn("Device is open ! Memory deallocation is deferred on last close.\n");
+       mutex_unlock(&dev->lock);
 
        return 0;
 }