net: dsa: mt7530: support setting ageing time
authorDENG Qingfang <dqfext@gmail.com>
Tue, 8 Dec 2020 07:00:28 +0000 (15:00 +0800)
committerDavid S. Miller <davem@davemloft.net>
Wed, 9 Dec 2020 00:18:26 +0000 (16:18 -0800)
MT7530 has a global address age control register, so use it to set
ageing time.

The applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds

Signed-off-by: DENG Qingfang <dqfext@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/dsa/mt7530.c
drivers/net/dsa/mt7530.h

index 6408402a44f5df0e4d7395f93757ab82b9d81405..99bf8fed6536f45a6e3bf18d6e05d4f4caa9004b 100644 (file)
@@ -870,6 +870,46 @@ mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
        return ARRAY_SIZE(mt7530_mib);
 }
 
+static int
+mt7530_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
+{
+       struct mt7530_priv *priv = ds->priv;
+       unsigned int secs = msecs / 1000;
+       unsigned int tmp_age_count;
+       unsigned int error = -1;
+       unsigned int age_count;
+       unsigned int age_unit;
+
+       /* Applied timer is (AGE_CNT + 1) * (AGE_UNIT + 1) seconds */
+       if (secs < 1 || secs > (AGE_CNT_MAX + 1) * (AGE_UNIT_MAX + 1))
+               return -ERANGE;
+
+       /* iterate through all possible age_count to find the closest pair */
+       for (tmp_age_count = 0; tmp_age_count <= AGE_CNT_MAX; ++tmp_age_count) {
+               unsigned int tmp_age_unit = secs / (tmp_age_count + 1) - 1;
+
+               if (tmp_age_unit <= AGE_UNIT_MAX) {
+                       unsigned int tmp_error = secs -
+                               (tmp_age_count + 1) * (tmp_age_unit + 1);
+
+                       /* found a closer pair */
+                       if (error > tmp_error) {
+                               error = tmp_error;
+                               age_count = tmp_age_count;
+                               age_unit = tmp_age_unit;
+                       }
+
+                       /* found the exact match, so break the loop */
+                       if (!error)
+                               break;
+               }
+       }
+
+       mt7530_write(priv, MT7530_AAC, AGE_CNT(age_count) | AGE_UNIT(age_unit));
+
+       return 0;
+}
+
 static void mt7530_setup_port5(struct dsa_switch *ds, phy_interface_t interface)
 {
        struct mt7530_priv *priv = ds->priv;
@@ -2564,6 +2604,7 @@ static const struct dsa_switch_ops mt7530_switch_ops = {
        .phy_write              = mt753x_phy_write,
        .get_ethtool_stats      = mt7530_get_ethtool_stats,
        .get_sset_count         = mt7530_get_sset_count,
+       .set_ageing_time        = mt7530_set_ageing_time,
        .port_enable            = mt7530_port_enable,
        .port_disable           = mt7530_port_disable,
        .port_change_mtu        = mt7530_port_change_mtu,
index ee3523a7537eb98764e54fe43afc322b2b7b33f1..32d8969b3ace7983de95b6b5070f6049c40380ff 100644 (file)
@@ -161,6 +161,19 @@ enum mt7530_vlan_egress_attr {
        MT7530_VLAN_EGRESS_STACK = 3,
 };
 
+/* Register for address age control */
+#define MT7530_AAC                     0xa0
+/* Disable ageing */
+#define  AGE_DIS                       BIT(20)
+/* Age count */
+#define  AGE_CNT_MASK                  GENMASK(19, 12)
+#define  AGE_CNT_MAX                   0xff
+#define  AGE_CNT(x)                    (AGE_CNT_MASK & ((x) << 12))
+/* Age unit */
+#define  AGE_UNIT_MASK                 GENMASK(11, 0)
+#define  AGE_UNIT_MAX                  0xfff
+#define  AGE_UNIT(x)                   (AGE_UNIT_MASK & (x))
+
 /* Register for port STP state control */
 #define MT7530_SSP_P(x)                        (0x2000 + ((x) * 0x100))
 #define  FID_PST(x)                    ((x) & 0x3)