iwlwifi: fix problem when rf_killswitch change during suspend/resume
authorZhu Yi <yi.zhu@intel.com>
Thu, 24 Jan 2008 10:19:38 +0000 (02:19 -0800)
committerDavid S. Miller <davem@davemloft.net>
Mon, 28 Jan 2008 23:09:58 +0000 (15:09 -0800)
After we delay device initialization until interface up, there are more
conditions for the hardware rf_kill switch states during suspend and
resume. For example, before suspend we can have interface up or down,
rf_kill enable or disable; before resume we can have rf_kill enable or
disable. So there are totally 2^3 = 8 conditions to handle. This patch
addressed this problem and makes sure every condition works correctly.

This patch also merges the device suspend and resume handlers with the
mac_start and mac_stop code since they are basically doing the same
thing.

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/iwlwifi/iwl4965-base.c

index e0e9bbdf140fad17aef1d6fa1b5be55cec3abe1b..b9a74f5eea5155aac41623f6f995252113b91b46 100644 (file)
@@ -6340,7 +6340,19 @@ static int __iwl3945_up(struct iwl3945_priv *priv)
        if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
                IWL_WARNING("Radio disabled by SW RF kill (module "
                            "parameter)\n");
-               return 0;
+               return -ENODEV;
+       }
+
+       /* If platform's RF_KILL switch is NOT set to KILL */
+       if (iwl3945_read32(priv, CSR_GP_CNTRL) &
+                               CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+               clear_bit(STATUS_RF_KILL_HW, &priv->status);
+       else {
+               set_bit(STATUS_RF_KILL_HW, &priv->status);
+               if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
+                       IWL_WARNING("Radio disabled by HW RF Kill switch\n");
+                       return -ENODEV;
+               }
        }
 
        if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
@@ -6375,6 +6387,10 @@ static int __iwl3945_up(struct iwl3945_priv *priv)
        memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
               priv->ucode_data.len);
 
+       /* We return success when we resume from suspend and rf_kill is on. */
+       if (test_bit(STATUS_RF_KILL_HW, &priv->status))
+               return 0;
+
        for (i = 0; i < MAX_HW_RESTARTS; i++) {
 
                iwl3945_clear_stations_table(priv);
@@ -6919,12 +6935,18 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
                }
        }
 
-       IWL_DEBUG_INFO("Start UP work.\n");
-       __iwl3945_up(priv);
+       ret = __iwl3945_up(priv);
 
-       priv->is_open = 1;
        mutex_unlock(&priv->mutex);
 
+       if (ret)
+               goto out_release_irq;
+
+       IWL_DEBUG_INFO("Start UP work.\n");
+
+       if (test_bit(STATUS_IN_SUSPEND, &priv->status))
+               return 0;
+
        /* Wait for START_ALIVE from ucode. Otherwise callbacks from
         * mac80211 will not be run successfully. */
        ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -6939,6 +6961,7 @@ static int iwl3945_mac_start(struct ieee80211_hw *hw)
                }
        }
 
+       priv->is_open = 1;
        IWL_DEBUG_MAC80211("leave\n");
        return 0;
 
@@ -6946,6 +6969,9 @@ out_release_irq:
        free_irq(priv->pci_dev->irq, priv);
 out_disable_msi:
        pci_disable_msi(priv->pci_dev);
+       pci_disable_device(priv->pci_dev);
+       priv->is_open = 0;
+       IWL_DEBUG_MAC80211("leave - failed\n");
        return ret;
 }
 
@@ -6955,12 +6981,17 @@ static void iwl3945_mac_stop(struct ieee80211_hw *hw)
 
        IWL_DEBUG_MAC80211("enter\n");
 
-       /* stop mac, cancel any scan request and clear
-        * RXON_FILTER_ASSOC_MSK BIT
-        */
+       if (!priv->is_open) {
+               IWL_DEBUG_MAC80211("leave - skip\n");
+               return;
+       }
+
        priv->is_open = 0;
 
        if (iwl3945_is_ready_rf(priv)) {
+               /* stop mac, cancel any scan request and clear
+                * RXON_FILTER_ASSOC_MSK BIT
+                */
                mutex_lock(&priv->mutex);
                iwl3945_scan_cancel_timeout(priv, 100);
                cancel_delayed_work(&priv->post_associate);
@@ -7334,7 +7365,6 @@ static void iwl3945_mac_remove_interface(struct ieee80211_hw *hw,
        mutex_unlock(&priv->mutex);
 
        IWL_DEBUG_MAC80211("leave\n");
-
 }
 
 static int iwl3945_mac_hw_scan(struct ieee80211_hw *hw, u8 *ssid, size_t len)
@@ -8731,89 +8761,27 @@ static int iwl3945_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct iwl3945_priv *priv = pci_get_drvdata(pdev);
 
-       set_bit(STATUS_IN_SUSPEND, &priv->status);
-
-       /* Take down the device; powers it off, etc. */
-       iwl3945_down(priv);
-
-       if (priv->mac80211_registered)
-               ieee80211_stop_queues(priv->hw);
+       if (priv->is_open) {
+               set_bit(STATUS_IN_SUSPEND, &priv->status);
+               iwl3945_mac_stop(priv->hw);
+               priv->is_open = 1;
+       }
 
-       pci_save_state(pdev);
-       pci_disable_device(pdev);
        pci_set_power_state(pdev, PCI_D3hot);
 
        return 0;
 }
 
-static void iwl3945_resume(struct iwl3945_priv *priv)
-{
-       unsigned long flags;
-
-       /* The following it a temporary work around due to the
-        * suspend / resume not fully initializing the NIC correctly.
-        * Without all of the following, resume will not attempt to take
-        * down the NIC (it shouldn't really need to) and will just try
-        * and bring the NIC back up.  However that fails during the
-        * ucode verification process.  This then causes iwl3945_down to be
-        * called *after* iwl3945_hw_nic_init() has succeeded -- which
-        * then lets the next init sequence succeed.  So, we've
-        * replicated all of that NIC init code here... */
-
-       iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-       iwl3945_hw_nic_init(priv);
-
-       iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-       iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-                   CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-       iwl3945_write32(priv, CSR_INT, 0xFFFFFFFF);
-       iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-       iwl3945_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-       /* tell the device to stop sending interrupts */
-       iwl3945_disable_interrupts(priv);
-
-       spin_lock_irqsave(&priv->lock, flags);
-       iwl3945_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
-       if (!iwl3945_grab_nic_access(priv)) {
-               iwl3945_write_prph(priv, APMG_CLK_DIS_REG,
-                                        APMG_CLK_VAL_DMA_CLK_RQT);
-               iwl3945_release_nic_access(priv);
-       }
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       udelay(5);
-
-       iwl3945_hw_nic_reset(priv);
-
-       /* Bring the device back up */
-       clear_bit(STATUS_IN_SUSPEND, &priv->status);
-       queue_work(priv->workqueue, &priv->up);
-}
-
 static int iwl3945_pci_resume(struct pci_dev *pdev)
 {
        struct iwl3945_priv *priv = pci_get_drvdata(pdev);
-       int err;
-
-       printk(KERN_INFO "Coming out of suspend...\n");
 
        pci_set_power_state(pdev, PCI_D0);
-       err = pci_enable_device(pdev);
-       pci_restore_state(pdev);
 
-       /*
-        * Suspend/Resume resets the PCI configuration space, so we have to
-        * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-        * from interfering with C3 CPU state. pci_restore_state won't help
-        * here since it only restores the first 64 bytes pci config header.
-        */
-       pci_write_config_byte(pdev, 0x41, 0x00);
-
-       iwl3945_resume(priv);
+       if (priv->is_open)
+               iwl3945_mac_start(priv->hw);
 
+       clear_bit(STATUS_IN_SUSPEND, &priv->status);
        return 0;
 }
 
index 98f09e6e9f8c385068d831e029d73095b15a72df..811e41b7f664fcfafbd50d9a32e661b728c6063e 100644 (file)
@@ -6761,7 +6761,6 @@ static void iwl4965_down(struct iwl4965_priv *priv)
 static int __iwl4965_up(struct iwl4965_priv *priv)
 {
        int rc, i;
-       u32 hw_rf_kill = 0;
 
        if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
                IWL_WARNING("Exit pending; will not bring the NIC up\n");
@@ -6771,7 +6770,19 @@ static int __iwl4965_up(struct iwl4965_priv *priv)
        if (test_bit(STATUS_RF_KILL_SW, &priv->status)) {
                IWL_WARNING("Radio disabled by SW RF kill (module "
                            "parameter)\n");
-               return 0;
+               return -ENODEV;
+       }
+
+       /* If platform's RF_KILL switch is NOT set to KILL */
+       if (iwl4965_read32(priv, CSR_GP_CNTRL) &
+                               CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+               clear_bit(STATUS_RF_KILL_HW, &priv->status);
+       else {
+               set_bit(STATUS_RF_KILL_HW, &priv->status);
+               if (!test_bit(STATUS_IN_SUSPEND, &priv->status)) {
+                       IWL_WARNING("Radio disabled by HW RF Kill switch\n");
+                       return -ENODEV;
+               }
        }
 
        if (!priv->ucode_data_backup.v_addr || !priv->ucode_data.v_addr) {
@@ -6806,17 +6817,9 @@ static int __iwl4965_up(struct iwl4965_priv *priv)
        memcpy(priv->ucode_data_backup.v_addr, priv->ucode_data.v_addr,
               priv->ucode_data.len);
 
-       /* If platform's RF_KILL switch is set to KILL,
-        * wait for BIT_INT_RF_KILL interrupt before loading uCode
-        * and getting things started */
-       if (!(iwl4965_read32(priv, CSR_GP_CNTRL) &
-                               CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
-               hw_rf_kill = 1;
-
-       if (test_bit(STATUS_RF_KILL_HW, &priv->status) || hw_rf_kill) {
-               IWL_WARNING("Radio disabled by HW RF Kill switch\n");
+       /* We return success when we resume from suspend and rf_kill is on. */
+       if (test_bit(STATUS_RF_KILL_HW, &priv->status))
                return 0;
-       }
 
        for (i = 0; i < MAX_HW_RESTARTS; i++) {
 
@@ -7379,12 +7382,18 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
                }
        }
 
-       IWL_DEBUG_INFO("Start UP work.\n");
-       __iwl4965_up(priv);
+       ret = __iwl4965_up(priv);
 
-       priv->is_open = 1;
        mutex_unlock(&priv->mutex);
 
+       if (ret)
+               goto out_release_irq;
+
+       IWL_DEBUG_INFO("Start UP work done.\n");
+
+       if (test_bit(STATUS_IN_SUSPEND, &priv->status))
+               return 0;
+
        /* Wait for START_ALIVE from ucode. Otherwise callbacks from
         * mac80211 will not be run successfully. */
        ret = wait_event_interruptible_timeout(priv->wait_command_queue,
@@ -7399,6 +7408,7 @@ static int iwl4965_mac_start(struct ieee80211_hw *hw)
                }
        }
 
+       priv->is_open = 1;
        IWL_DEBUG_MAC80211("leave\n");
        return 0;
 
@@ -7406,6 +7416,9 @@ out_release_irq:
        free_irq(priv->pci_dev->irq, priv);
 out_disable_msi:
        pci_disable_msi(priv->pci_dev);
+       pci_disable_device(priv->pci_dev);
+       priv->is_open = 0;
+       IWL_DEBUG_MAC80211("leave - failed\n");
        return ret;
 }
 
@@ -7415,12 +7428,17 @@ static void iwl4965_mac_stop(struct ieee80211_hw *hw)
 
        IWL_DEBUG_MAC80211("enter\n");
 
-       /* stop mac, cancel any scan request and clear
-        * RXON_FILTER_ASSOC_MSK BIT
-        */
+       if (!priv->is_open) {
+               IWL_DEBUG_MAC80211("leave - skip\n");
+               return;
+       }
+
        priv->is_open = 0;
 
        if (iwl4965_is_ready_rf(priv)) {
+               /* stop mac, cancel any scan request and clear
+                * RXON_FILTER_ASSOC_MSK BIT
+                */
                mutex_lock(&priv->mutex);
                iwl4965_scan_cancel_timeout(priv, 100);
                cancel_delayed_work(&priv->post_associate);
@@ -8152,7 +8170,6 @@ static void iwl4965_mac_reset_tsf(struct ieee80211_hw *hw)
        mutex_unlock(&priv->mutex);
 
        IWL_DEBUG_MAC80211("leave\n");
-
 }
 
 static int iwl4965_mac_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
@@ -9327,89 +9344,27 @@ static int iwl4965_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 {
        struct iwl4965_priv *priv = pci_get_drvdata(pdev);
 
-       set_bit(STATUS_IN_SUSPEND, &priv->status);
-
-       /* Take down the device; powers it off, etc. */
-       iwl4965_down(priv);
-
-       if (priv->mac80211_registered)
-               ieee80211_stop_queues(priv->hw);
+       if (priv->is_open) {
+               set_bit(STATUS_IN_SUSPEND, &priv->status);
+               iwl4965_mac_stop(priv->hw);
+               priv->is_open = 1;
+       }
 
-       pci_save_state(pdev);
-       pci_disable_device(pdev);
        pci_set_power_state(pdev, PCI_D3hot);
 
        return 0;
 }
 
-static void iwl4965_resume(struct iwl4965_priv *priv)
-{
-       unsigned long flags;
-
-       /* The following it a temporary work around due to the
-        * suspend / resume not fully initializing the NIC correctly.
-        * Without all of the following, resume will not attempt to take
-        * down the NIC (it shouldn't really need to) and will just try
-        * and bring the NIC back up.  However that fails during the
-        * ucode verification process.  This then causes iwl4965_down to be
-        * called *after* iwl4965_hw_nic_init() has succeeded -- which
-        * then lets the next init sequence succeed.  So, we've
-        * replicated all of that NIC init code here... */
-
-       iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
-
-       iwl4965_hw_nic_init(priv);
-
-       iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-       iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR,
-                   CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-       iwl4965_write32(priv, CSR_INT, 0xFFFFFFFF);
-       iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-       iwl4965_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
-       /* tell the device to stop sending interrupts */
-       iwl4965_disable_interrupts(priv);
-
-       spin_lock_irqsave(&priv->lock, flags);
-       iwl4965_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
-       if (!iwl4965_grab_nic_access(priv)) {
-               iwl4965_write_prph(priv, APMG_CLK_DIS_REG,
-                               APMG_CLK_VAL_DMA_CLK_RQT);
-               iwl4965_release_nic_access(priv);
-       }
-       spin_unlock_irqrestore(&priv->lock, flags);
-
-       udelay(5);
-
-       iwl4965_hw_nic_reset(priv);
-
-       /* Bring the device back up */
-       clear_bit(STATUS_IN_SUSPEND, &priv->status);
-       queue_work(priv->workqueue, &priv->up);
-}
-
 static int iwl4965_pci_resume(struct pci_dev *pdev)
 {
        struct iwl4965_priv *priv = pci_get_drvdata(pdev);
-       int err;
-
-       printk(KERN_INFO "Coming out of suspend...\n");
 
        pci_set_power_state(pdev, PCI_D0);
-       err = pci_enable_device(pdev);
-       pci_restore_state(pdev);
 
-       /*
-        * Suspend/Resume resets the PCI configuration space, so we have to
-        * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
-        * from interfering with C3 CPU state. pci_restore_state won't help
-        * here since it only restores the first 64 bytes pci config header.
-        */
-       pci_write_config_byte(pdev, 0x41, 0x00);
-
-       iwl4965_resume(priv);
+       if (priv->is_open)
+               iwl4965_mac_start(priv->hw);
 
+       clear_bit(STATUS_IN_SUSPEND, &priv->status);
        return 0;
 }