staging: fbtft: remove ARCH_BCM2708 optimization
authorNoralf Trønnes <notro@tronnes.org>
Tue, 20 Jan 2015 22:40:26 +0000 (23:40 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 21 Jan 2015 01:17:49 +0000 (09:17 +0800)
ARCH_BCM2708 is not present in mainline so remove optimization.

Signed-off-by: Noralf Trønnes <notro@tronnes.org>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/fbtft/fbtft-io.c

index dfa2c468454a2ba7cf6736259f3245a94674753b..32155a7b2a624099f8d7d1bee727ff6dc44f58af 100644 (file)
@@ -2,9 +2,6 @@
 #include <linux/errno.h>
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
-#ifdef CONFIG_ARCH_BCM2708
-#include <mach/platform.h>
-#endif
 #include "fbtft.h"
 
 int fbtft_write_spi(struct fbtft_par *par, void *buf, size_t len)
@@ -129,171 +126,6 @@ int fbtft_read_spi(struct fbtft_par *par, void *buf, size_t len)
 }
 EXPORT_SYMBOL(fbtft_read_spi);
 
-
-#ifdef CONFIG_ARCH_BCM2708
-
-/*
- *  Raspberry Pi
- *  -  writing directly to the registers is 40-50% faster than
- *     optimized use of gpiolib
- */
-
-#define GPIOSET(no, ishigh)           \
-do {                                  \
-       if (ishigh)                   \
-               set |= (1 << (no));   \
-       else                          \
-               reset |= (1 << (no)); \
-} while (0)
-
-int fbtft_write_gpio8_wr(struct fbtft_par *par, void *buf, size_t len)
-{
-       unsigned int set = 0;
-       unsigned int reset = 0;
-       u8 data;
-
-       fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
-               "%s(len=%d): ", __func__, len);
-
-       while (len--) {
-               data = *(u8 *) buf;
-               buf++;
-
-               /* Set data */
-               GPIOSET(par->gpio.db[0], (data&0x01));
-               GPIOSET(par->gpio.db[1], (data&0x02));
-               GPIOSET(par->gpio.db[2], (data&0x04));
-               GPIOSET(par->gpio.db[3], (data&0x08));
-               GPIOSET(par->gpio.db[4], (data&0x10));
-               GPIOSET(par->gpio.db[5], (data&0x20));
-               GPIOSET(par->gpio.db[6], (data&0x40));
-               GPIOSET(par->gpio.db[7], (data&0x80));
-               writel(set, __io_address(GPIO_BASE+0x1C));
-               writel(reset, __io_address(GPIO_BASE+0x28));
-
-               /* Pulse /WR low */
-               writel((1<<par->gpio.wr),  __io_address(GPIO_BASE+0x28));
-               writel(0,  __io_address(GPIO_BASE+0x28)); /* used as a delay */
-               writel((1<<par->gpio.wr),  __io_address(GPIO_BASE+0x1C));
-
-               set = 0;
-               reset = 0;
-       }
-
-       return 0;
-}
-EXPORT_SYMBOL(fbtft_write_gpio8_wr);
-
-int fbtft_write_gpio16_wr(struct fbtft_par *par, void *buf, size_t len)
-{
-       unsigned int set = 0;
-       unsigned int reset = 0;
-       u16 data;
-
-       fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
-               "%s(len=%d): ", __func__, len);
-
-       while (len) {
-               len -= 2;
-               data = *(u16 *) buf;
-               buf += 2;
-
-               /* Start writing by pulling down /WR */
-               gpio_set_value(par->gpio.wr, 0);
-
-               /* Set data */
-               GPIOSET(par->gpio.db[0],  (data&0x0001));
-               GPIOSET(par->gpio.db[1],  (data&0x0002));
-               GPIOSET(par->gpio.db[2],  (data&0x0004));
-               GPIOSET(par->gpio.db[3],  (data&0x0008));
-               GPIOSET(par->gpio.db[4],  (data&0x0010));
-               GPIOSET(par->gpio.db[5],  (data&0x0020));
-               GPIOSET(par->gpio.db[6],  (data&0x0040));
-               GPIOSET(par->gpio.db[7],  (data&0x0080));
-
-               GPIOSET(par->gpio.db[8],  (data&0x0100));
-               GPIOSET(par->gpio.db[9],  (data&0x0200));
-               GPIOSET(par->gpio.db[10], (data&0x0400));
-               GPIOSET(par->gpio.db[11], (data&0x0800));
-               GPIOSET(par->gpio.db[12], (data&0x1000));
-               GPIOSET(par->gpio.db[13], (data&0x2000));
-               GPIOSET(par->gpio.db[14], (data&0x4000));
-               GPIOSET(par->gpio.db[15], (data&0x8000));
-
-               writel(set, __io_address(GPIO_BASE+0x1C));
-               writel(reset, __io_address(GPIO_BASE+0x28));
-
-               /* Pullup /WR */
-               gpio_set_value(par->gpio.wr, 1);
-
-               set = 0;
-               reset = 0;
-       }
-
-       return 0;
-}
-EXPORT_SYMBOL(fbtft_write_gpio16_wr);
-
-int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
-{
-       unsigned int set = 0;
-       unsigned int reset = 0;
-       u16 data;
-
-       fbtft_par_dbg_hex(DEBUG_WRITE, par, par->info->device, u8, buf, len,
-               "%s(len=%d): ", __func__, len);
-
-       while (len) {
-               len -= 2;
-               data = *(u16 *) buf;
-               buf += 2;
-
-               /* Start writing by pulling down /WR */
-               gpio_set_value(par->gpio.wr, 0);
-
-               /* Low byte */
-               GPIOSET(par->gpio.db[0],  (data&0x0001));
-               GPIOSET(par->gpio.db[1],  (data&0x0002));
-               GPIOSET(par->gpio.db[2],  (data&0x0004));
-               GPIOSET(par->gpio.db[3],  (data&0x0008));
-               GPIOSET(par->gpio.db[4],  (data&0x0010));
-               GPIOSET(par->gpio.db[5],  (data&0x0020));
-               GPIOSET(par->gpio.db[6],  (data&0x0040));
-               GPIOSET(par->gpio.db[7],  (data&0x0080));
-               writel(set, __io_address(GPIO_BASE+0x1C));
-               writel(reset, __io_address(GPIO_BASE+0x28));
-
-               /* Pulse 'latch' high */
-               gpio_set_value(par->gpio.latch, 1);
-               gpio_set_value(par->gpio.latch, 0);
-
-               /* High byte */
-               GPIOSET(par->gpio.db[0], (data&0x0100));
-               GPIOSET(par->gpio.db[1], (data&0x0200));
-               GPIOSET(par->gpio.db[2], (data&0x0400));
-               GPIOSET(par->gpio.db[3], (data&0x0800));
-               GPIOSET(par->gpio.db[4], (data&0x1000));
-               GPIOSET(par->gpio.db[5], (data&0x2000));
-               GPIOSET(par->gpio.db[6], (data&0x4000));
-               GPIOSET(par->gpio.db[7], (data&0x8000));
-               writel(set, __io_address(GPIO_BASE+0x1C));
-               writel(reset, __io_address(GPIO_BASE+0x28));
-
-               /* Pullup /WR */
-               gpio_set_value(par->gpio.wr, 1);
-
-               set = 0;
-               reset = 0;
-       }
-
-       return 0;
-}
-EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
-
-#undef GPIOSET
-
-#else
-
 /*
  * Optimized use of gpiolib is twice as fast as no optimization
  * only one driver can use the optimized version at a time
@@ -405,5 +237,3 @@ int fbtft_write_gpio16_wr_latched(struct fbtft_par *par, void *buf, size_t len)
        return -1;
 }
 EXPORT_SYMBOL(fbtft_write_gpio16_wr_latched);
-
-#endif /* CONFIG_ARCH_BCM2708 */