F: Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
F: arch/riscv/boot/dts/thead/
F: drivers/clk/thead/clk-th1520-ap.c
+F: drivers/firmware/thead,th1520-aon.c
F: drivers/mailbox/mailbox-th1520.c
F: drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
F: drivers/pinctrl/pinctrl-th1520.c
F: include/dt-bindings/clock/thead,th1520-clk-ap.h
+F: include/linux/firmware/thead/thead,th1520-aon.h
RNBD BLOCK DRIVERS
M: Md. Haris Iqbal <haris.iqbal@ionos.com>
If unsure, say Y.
+config TH1520_AON_PROTOCOL
+ tristate "Always-On firmware protocol"
+ depends on ARCH_THEAD || COMPILE_TEST
+ help
+ Power, clock, and resource management capabilities on the TH1520 SoC are
+ managed by the E902 core. Firmware running on this core communicates with
+ the kernel through the Always-On protocol, using hardware mailbox as a medium.
+ Say yes if you need such capabilities.
+
config TI_SCI_PROTOCOL
tristate "TI System Control Interface (TISCI) Message Protocol"
depends on TI_MESSAGE_MANAGER
obj-$(CONFIG_FW_CFG_SYSFS) += qemu_fw_cfg.o
obj-$(CONFIG_SYSFB) += sysfb.o
obj-$(CONFIG_SYSFB_SIMPLEFB) += sysfb_simplefb.o
+obj-$(CONFIG_TH1520_AON_PROTOCOL) += thead,th1520-aon.o
obj-$(CONFIG_TI_SCI_PROTOCOL) += ti_sci.o
obj-$(CONFIG_TRUSTED_FOUNDATIONS) += trusted_foundations.o
obj-$(CONFIG_TURRIS_MOX_RWTM) += turris-mox-rwtm.o
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (c) 2024 Samsung Electronics Co., Ltd.
+ * Author: Michal Wilczynski <m.wilczynski@samsung.com>
+ */
+
+#include <linux/device.h>
+#include <linux/firmware/thead/thead,th1520-aon.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox_controller.h>
+#include <linux/slab.h>
+
+#define MAX_RX_TIMEOUT (msecs_to_jiffies(3000))
+#define MAX_TX_TIMEOUT 500
+
+struct th1520_aon_chan {
+ struct mbox_chan *ch;
+ struct th1520_aon_rpc_ack_common ack_msg;
+ struct mbox_client cl;
+ struct completion done;
+
+ /* make sure only one RPC is performed at a time */
+ struct mutex transaction_lock;
+};
+
+struct th1520_aon_msg_req_set_resource_power_mode {
+ struct th1520_aon_rpc_msg_hdr hdr;
+ u16 resource;
+ u16 mode;
+ u16 reserved[10];
+} __packed __aligned(1);
+
+/*
+ * This type is used to indicate error response for most functions.
+ */
+enum th1520_aon_error_codes {
+ LIGHT_AON_ERR_NONE = 0, /* Success */
+ LIGHT_AON_ERR_VERSION = 1, /* Incompatible API version */
+ LIGHT_AON_ERR_CONFIG = 2, /* Configuration error */
+ LIGHT_AON_ERR_PARM = 3, /* Bad parameter */
+ LIGHT_AON_ERR_NOACCESS = 4, /* Permission error (no access) */
+ LIGHT_AON_ERR_LOCKED = 5, /* Permission error (locked) */
+ LIGHT_AON_ERR_UNAVAILABLE = 6, /* Unavailable (out of resources) */
+ LIGHT_AON_ERR_NOTFOUND = 7, /* Not found */
+ LIGHT_AON_ERR_NOPOWER = 8, /* No power */
+ LIGHT_AON_ERR_IPC = 9, /* Generic IPC error */
+ LIGHT_AON_ERR_BUSY = 10, /* Resource is currently busy/active */
+ LIGHT_AON_ERR_FAIL = 11, /* General I/O failure */
+ LIGHT_AON_ERR_LAST
+};
+
+static int th1520_aon_linux_errmap[LIGHT_AON_ERR_LAST] = {
+ 0, /* LIGHT_AON_ERR_NONE */
+ -EINVAL, /* LIGHT_AON_ERR_VERSION */
+ -EINVAL, /* LIGHT_AON_ERR_CONFIG */
+ -EINVAL, /* LIGHT_AON_ERR_PARM */
+ -EACCES, /* LIGHT_AON_ERR_NOACCESS */
+ -EACCES, /* LIGHT_AON_ERR_LOCKED */
+ -ERANGE, /* LIGHT_AON_ERR_UNAVAILABLE */
+ -EEXIST, /* LIGHT_AON_ERR_NOTFOUND */
+ -EPERM, /* LIGHT_AON_ERR_NOPOWER */
+ -EPIPE, /* LIGHT_AON_ERR_IPC */
+ -EBUSY, /* LIGHT_AON_ERR_BUSY */
+ -EIO, /* LIGHT_AON_ERR_FAIL */
+};
+
+static inline int th1520_aon_to_linux_errno(int errno)
+{
+ if (errno >= LIGHT_AON_ERR_NONE && errno < LIGHT_AON_ERR_LAST)
+ return th1520_aon_linux_errmap[errno];
+
+ return -EIO;
+}
+
+static void th1520_aon_rx_callback(struct mbox_client *c, void *rx_msg)
+{
+ struct th1520_aon_chan *aon_chan =
+ container_of(c, struct th1520_aon_chan, cl);
+ struct th1520_aon_rpc_msg_hdr *hdr =
+ (struct th1520_aon_rpc_msg_hdr *)rx_msg;
+ u8 recv_size = sizeof(struct th1520_aon_rpc_msg_hdr) + hdr->size;
+
+ if (recv_size != sizeof(struct th1520_aon_rpc_ack_common)) {
+ dev_err(c->dev, "Invalid ack size, not completing\n");
+ return;
+ }
+
+ memcpy(&aon_chan->ack_msg, rx_msg, recv_size);
+ complete(&aon_chan->done);
+}
+
+/**
+ * th1520_aon_call_rpc() - Send an RPC request to the TH1520 AON subsystem
+ * @aon_chan: Pointer to the AON channel structure
+ * @msg: Pointer to the message (RPC payload) that will be sent
+ *
+ * This function sends an RPC message to the TH1520 AON subsystem via mailbox.
+ * It takes the provided @msg buffer, formats it with version and service flags,
+ * then blocks until the RPC completes or times out. The completion is signaled
+ * by the `aon_chan->done` completion, which is waited upon for a duration
+ * defined by `MAX_RX_TIMEOUT`.
+ *
+ * Return:
+ * * 0 on success
+ * * -ETIMEDOUT if the RPC call times out
+ * * A negative error code if the mailbox send fails or if AON responds with
+ * a non-zero error code (converted via th1520_aon_to_linux_errno()).
+ */
+int th1520_aon_call_rpc(struct th1520_aon_chan *aon_chan, void *msg)
+{
+ struct th1520_aon_rpc_msg_hdr *hdr = msg;
+ int ret;
+
+ mutex_lock(&aon_chan->transaction_lock);
+ reinit_completion(&aon_chan->done);
+
+ RPC_SET_VER(hdr, TH1520_AON_RPC_VERSION);
+ RPC_SET_SVC_ID(hdr, hdr->svc);
+ RPC_SET_SVC_FLAG_MSG_TYPE(hdr, RPC_SVC_MSG_TYPE_DATA);
+ RPC_SET_SVC_FLAG_ACK_TYPE(hdr, RPC_SVC_MSG_NEED_ACK);
+
+ ret = mbox_send_message(aon_chan->ch, msg);
+ if (ret < 0) {
+ dev_err(aon_chan->cl.dev, "RPC send msg failed: %d\n", ret);
+ goto out;
+ }
+
+ if (!wait_for_completion_timeout(&aon_chan->done, MAX_RX_TIMEOUT)) {
+ dev_err(aon_chan->cl.dev, "RPC send msg timeout\n");
+ mutex_unlock(&aon_chan->transaction_lock);
+ return -ETIMEDOUT;
+ }
+
+ ret = aon_chan->ack_msg.err_code;
+
+out:
+ mutex_unlock(&aon_chan->transaction_lock);
+
+ return th1520_aon_to_linux_errno(ret);
+}
+EXPORT_SYMBOL_GPL(th1520_aon_call_rpc);
+
+/**
+ * th1520_aon_power_update() - Change power state of a resource via TH1520 AON
+ * @aon_chan: Pointer to the AON channel structure
+ * @rsrc: Resource ID whose power state needs to be updated
+ * @power_on: Boolean indicating whether the resource should be powered on (true)
+ * or powered off (false)
+ *
+ * This function requests the TH1520 AON subsystem to set the power mode of the
+ * given resource (@rsrc) to either on or off. It constructs the message in
+ * `struct th1520_aon_msg_req_set_resource_power_mode` and then invokes
+ * th1520_aon_call_rpc() to make the request. If the AON call fails, an error
+ * message is logged along with the specific return code.
+ *
+ * Return:
+ * * 0 on success
+ * * A negative error code in case of failures (propagated from
+ * th1520_aon_call_rpc()).
+ */
+int th1520_aon_power_update(struct th1520_aon_chan *aon_chan, u16 rsrc,
+ bool power_on)
+{
+ struct th1520_aon_msg_req_set_resource_power_mode msg = {};
+ struct th1520_aon_rpc_msg_hdr *hdr = &msg.hdr;
+ int ret;
+
+ hdr->svc = TH1520_AON_RPC_SVC_PM;
+ hdr->func = TH1520_AON_PM_FUNC_SET_RESOURCE_POWER_MODE;
+ hdr->size = TH1520_AON_RPC_MSG_NUM;
+
+ RPC_SET_BE16(&msg.resource, 0, rsrc);
+ RPC_SET_BE16(&msg.resource, 2,
+ (power_on ? TH1520_AON_PM_PW_MODE_ON :
+ TH1520_AON_PM_PW_MODE_OFF));
+
+ ret = th1520_aon_call_rpc(aon_chan, &msg);
+ if (ret)
+ dev_err(aon_chan->cl.dev, "failed to power %s resource %d ret %d\n",
+ power_on ? "up" : "off", rsrc, ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(th1520_aon_power_update);
+
+/**
+ * th1520_aon_init() - Initialize TH1520 AON firmware protocol interface
+ * @dev: Device pointer for the AON subsystem
+ *
+ * This function initializes the TH1520 AON firmware protocol interface by:
+ * - Allocating and initializing the AON channel structure
+ * - Setting up the mailbox client
+ * - Requesting the AON mailbox channel
+ * - Initializing synchronization primitives
+ *
+ * Return:
+ * * Valid pointer to th1520_aon_chan structure on success
+ * * ERR_PTR(-ENOMEM) if memory allocation fails
+ * * ERR_PTR() with other negative error codes from mailbox operations
+ */
+struct th1520_aon_chan *th1520_aon_init(struct device *dev)
+{
+ struct th1520_aon_chan *aon_chan;
+ struct mbox_client *cl;
+
+ aon_chan = kzalloc(sizeof(*aon_chan), GFP_KERNEL);
+ if (!aon_chan)
+ return ERR_PTR(-ENOMEM);
+
+ cl = &aon_chan->cl;
+ cl->dev = dev;
+ cl->tx_block = true;
+ cl->tx_tout = MAX_TX_TIMEOUT;
+ cl->rx_callback = th1520_aon_rx_callback;
+
+ aon_chan->ch = mbox_request_channel_byname(cl, "aon");
+ if (IS_ERR(aon_chan->ch)) {
+ dev_err(dev, "Failed to request aon mbox chan\n");
+ kfree(aon_chan);
+ return ERR_CAST(aon_chan->ch);
+ }
+
+ mutex_init(&aon_chan->transaction_lock);
+ init_completion(&aon_chan->done);
+
+ return aon_chan;
+}
+EXPORT_SYMBOL_GPL(th1520_aon_init);
+
+/**
+ * th1520_aon_deinit() - Clean up TH1520 AON firmware protocol interface
+ * @aon_chan: Pointer to the AON channel structure to clean up
+ *
+ * This function cleans up resources allocated by th1520_aon_init():
+ * - Frees the mailbox channel
+ * - Frees the AON channel
+ */
+void th1520_aon_deinit(struct th1520_aon_chan *aon_chan)
+{
+ mbox_free_channel(aon_chan->ch);
+ kfree(aon_chan);
+}
+EXPORT_SYMBOL_GPL(th1520_aon_deinit);
+
+MODULE_AUTHOR("Michal Wilczynski <m.wilczynski@samsung.com>");
+MODULE_DESCRIPTION("T-HEAD TH1520 Always-On firmware protocol library");
+MODULE_LICENSE("GPL");
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ */
+
+#ifndef _THEAD_AON_H
+#define _THEAD_AON_H
+
+#include <linux/device.h>
+#include <linux/types.h>
+
+#define AON_RPC_MSG_MAGIC (0xef)
+#define TH1520_AON_RPC_VERSION 2
+#define TH1520_AON_RPC_MSG_NUM 7
+
+struct th1520_aon_chan;
+
+enum th1520_aon_rpc_svc {
+ TH1520_AON_RPC_SVC_UNKNOWN = 0,
+ TH1520_AON_RPC_SVC_PM = 1,
+ TH1520_AON_RPC_SVC_MISC = 2,
+ TH1520_AON_RPC_SVC_AVFS = 3,
+ TH1520_AON_RPC_SVC_SYS = 4,
+ TH1520_AON_RPC_SVC_WDG = 5,
+ TH1520_AON_RPC_SVC_LPM = 6,
+ TH1520_AON_RPC_SVC_MAX = 0x3F,
+};
+
+enum th1520_aon_misc_func {
+ TH1520_AON_MISC_FUNC_UNKNOWN = 0,
+ TH1520_AON_MISC_FUNC_SET_CONTROL = 1,
+ TH1520_AON_MISC_FUNC_GET_CONTROL = 2,
+ TH1520_AON_MISC_FUNC_REGDUMP_CFG = 3,
+};
+
+enum th1520_aon_wdg_func {
+ TH1520_AON_WDG_FUNC_UNKNOWN = 0,
+ TH1520_AON_WDG_FUNC_START = 1,
+ TH1520_AON_WDG_FUNC_STOP = 2,
+ TH1520_AON_WDG_FUNC_PING = 3,
+ TH1520_AON_WDG_FUNC_TIMEOUTSET = 4,
+ TH1520_AON_WDG_FUNC_RESTART = 5,
+ TH1520_AON_WDG_FUNC_GET_STATE = 6,
+ TH1520_AON_WDG_FUNC_POWER_OFF = 7,
+ TH1520_AON_WDG_FUNC_AON_WDT_ON = 8,
+ TH1520_AON_WDG_FUNC_AON_WDT_OFF = 9,
+};
+
+enum th1520_aon_sys_func {
+ TH1520_AON_SYS_FUNC_UNKNOWN = 0,
+ TH1520_AON_SYS_FUNC_AON_RESERVE_MEM = 1,
+};
+
+enum th1520_aon_lpm_func {
+ TH1520_AON_LPM_FUNC_UNKNOWN = 0,
+ TH1520_AON_LPM_FUNC_REQUIRE_STR = 1,
+ TH1520_AON_LPM_FUNC_RESUME_STR = 2,
+ TH1520_AON_LPM_FUNC_REQUIRE_STD = 3,
+ TH1520_AON_LPM_FUNC_CPUHP = 4,
+ TH1520_AON_LPM_FUNC_REGDUMP_CFG = 5,
+};
+
+enum th1520_aon_pm_func {
+ TH1520_AON_PM_FUNC_UNKNOWN = 0,
+ TH1520_AON_PM_FUNC_SET_RESOURCE_REGULATOR = 1,
+ TH1520_AON_PM_FUNC_GET_RESOURCE_REGULATOR = 2,
+ TH1520_AON_PM_FUNC_SET_RESOURCE_POWER_MODE = 3,
+ TH1520_AON_PM_FUNC_PWR_SET = 4,
+ TH1520_AON_PM_FUNC_PWR_GET = 5,
+ TH1520_AON_PM_FUNC_CHECK_FAULT = 6,
+ TH1520_AON_PM_FUNC_GET_TEMPERATURE = 7,
+};
+
+struct th1520_aon_rpc_msg_hdr {
+ u8 ver; /* version of msg hdr */
+ u8 size; /* msg size ,uinit in bytes,the size includes rpc msg header self */
+ u8 svc; /* rpc main service id */
+ u8 func; /* rpc sub func id of specific service, sent by caller */
+} __packed __aligned(1);
+
+struct th1520_aon_rpc_ack_common {
+ struct th1520_aon_rpc_msg_hdr hdr;
+ u8 err_code;
+} __packed __aligned(1);
+
+#define RPC_SVC_MSG_TYPE_DATA 0
+#define RPC_SVC_MSG_TYPE_ACK 1
+#define RPC_SVC_MSG_NEED_ACK 0
+#define RPC_SVC_MSG_NO_NEED_ACK 1
+
+#define RPC_GET_VER(MESG) ((MESG)->ver)
+#define RPC_SET_VER(MESG, VER) ((MESG)->ver = (VER))
+#define RPC_GET_SVC_ID(MESG) ((MESG)->svc & 0x3F)
+#define RPC_SET_SVC_ID(MESG, ID) ((MESG)->svc |= 0x3F & (ID))
+#define RPC_GET_SVC_FLAG_MSG_TYPE(MESG) (((MESG)->svc & 0x80) >> 7)
+#define RPC_SET_SVC_FLAG_MSG_TYPE(MESG, TYPE) ((MESG)->svc |= (TYPE) << 7)
+#define RPC_GET_SVC_FLAG_ACK_TYPE(MESG) (((MESG)->svc & 0x40) >> 6)
+#define RPC_SET_SVC_FLAG_ACK_TYPE(MESG, ACK) ((MESG)->svc |= (ACK) << 6)
+
+#define RPC_SET_BE64(MESG, OFFSET, SET_DATA) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ u64 _set_data = (SET_DATA); \
+ data[_offset + 7] = _set_data & 0xFF; \
+ data[_offset + 6] = (_set_data & 0xFF00) >> 8; \
+ data[_offset + 5] = (_set_data & 0xFF0000) >> 16; \
+ data[_offset + 4] = (_set_data & 0xFF000000) >> 24; \
+ data[_offset + 3] = (_set_data & 0xFF00000000) >> 32; \
+ data[_offset + 2] = (_set_data & 0xFF0000000000) >> 40; \
+ data[_offset + 1] = (_set_data & 0xFF000000000000) >> 48; \
+ data[_offset + 0] = (_set_data & 0xFF00000000000000) >> 56; \
+ } while (0)
+
+#define RPC_SET_BE32(MESG, OFFSET, SET_DATA) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ u64 _set_data = (SET_DATA); \
+ data[_offset + 3] = (_set_data) & 0xFF; \
+ data[_offset + 2] = (_set_data & 0xFF00) >> 8; \
+ data[_offset + 1] = (_set_data & 0xFF0000) >> 16; \
+ data[_offset + 0] = (_set_data & 0xFF000000) >> 24; \
+ } while (0)
+
+#define RPC_SET_BE16(MESG, OFFSET, SET_DATA) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ u64 _set_data = (SET_DATA); \
+ data[_offset + 1] = (_set_data) & 0xFF; \
+ data[_offset + 0] = (_set_data & 0xFF00) >> 8; \
+ } while (0)
+
+#define RPC_SET_U8(MESG, OFFSET, SET_DATA) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ data[OFFSET] = (SET_DATA) & 0xFF; \
+ } while (0)
+
+#define RPC_GET_BE64(MESG, OFFSET, PTR) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ *(u32 *)(PTR) = \
+ (data[_offset + 7] | data[_offset + 6] << 8 | \
+ data[_offset + 5] << 16 | data[_offset + 4] << 24 | \
+ data[_offset + 3] << 32 | data[_offset + 2] << 40 | \
+ data[_offset + 1] << 48 | data[_offset + 0] << 56); \
+ } while (0)
+
+#define RPC_GET_BE32(MESG, OFFSET, PTR) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ *(u32 *)(PTR) = \
+ (data[_offset + 3] | data[_offset + 2] << 8 | \
+ data[_offset + 1] << 16 | data[_offset + 0] << 24); \
+ } while (0)
+
+#define RPC_GET_BE16(MESG, OFFSET, PTR) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ u64 _offset = (OFFSET); \
+ *(u16 *)(PTR) = (data[_offset + 1] | data[_offset + 0] << 8); \
+ } while (0)
+
+#define RPC_GET_U8(MESG, OFFSET, PTR) \
+ do { \
+ u8 *data = (u8 *)(MESG); \
+ *(u8 *)(PTR) = (data[OFFSET]); \
+ } while (0)
+
+/*
+ * Defines for SC PM Power Mode
+ */
+#define TH1520_AON_PM_PW_MODE_OFF 0 /* Power off */
+#define TH1520_AON_PM_PW_MODE_STBY 1 /* Power in standby */
+#define TH1520_AON_PM_PW_MODE_LP 2 /* Power in low-power */
+#define TH1520_AON_PM_PW_MODE_ON 3 /* Power on */
+
+/*
+ * Defines for AON power islands
+ */
+#define TH1520_AON_AUDIO_PD 0
+#define TH1520_AON_VDEC_PD 1
+#define TH1520_AON_NPU_PD 2
+#define TH1520_AON_VENC_PD 3
+#define TH1520_AON_GPU_PD 4
+#define TH1520_AON_DSP0_PD 5
+#define TH1520_AON_DSP1_PD 6
+
+struct th1520_aon_chan *th1520_aon_init(struct device *dev);
+void th1520_aon_deinit(struct th1520_aon_chan *aon_chan);
+
+int th1520_aon_call_rpc(struct th1520_aon_chan *aon_chan, void *msg);
+int th1520_aon_power_update(struct th1520_aon_chan *aon_chan, u16 rsrc,
+ bool power_on);
+
+#endif /* _THEAD_AON_H */
projects / linux-block.git / commitdiff