[ARM] pxa: merge all eseries board code into eseries.c
authorEric Miao <eric.y.miao@gmail.com>
Sun, 20 Jun 2010 12:35:32 +0000 (20:35 +0800)
committerEric Miao <eric.y.miao@gmail.com>
Thu, 5 Aug 2010 06:32:20 +0000 (14:32 +0800)
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
arch/arm/mach-pxa/Makefile
arch/arm/mach-pxa/e330.c [deleted file]
arch/arm/mach-pxa/e350.c [deleted file]
arch/arm/mach-pxa/e400.c [deleted file]
arch/arm/mach-pxa/e740.c [deleted file]
arch/arm/mach-pxa/e750.c [deleted file]
arch/arm/mach-pxa/e800.c [deleted file]
arch/arm/mach-pxa/eseries.c

index 3f72218462a8cb44781c239d1059a2b6878a4ef5..cb408efef618ee17e455d0762569814abec26881 100644 (file)
@@ -86,12 +86,6 @@ obj-$(CONFIG_MACH_POODLE)    += poodle.o
 obj-$(CONFIG_MACH_TOSA)                += tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES) += eseries.o
-obj-$(CONFIG_MACH_E330)                += e330.o
-obj-$(CONFIG_MACH_E350)                += e350.o
-obj-$(CONFIG_MACH_E740)                += e740.o
-obj-$(CONFIG_MACH_E750)                += e750.o
-obj-$(CONFIG_MACH_E400)                += e400.o
-obj-$(CONFIG_MACH_E800)                += e800.o
 obj-$(CONFIG_MACH_RAUMFELD_RC)         += raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)  += raumfeld.o
 obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)    += raumfeld.o
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
deleted file mode 100644 (file)
index 8fde338..0000000
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e330 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tc6387xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e330 tc6387xb parameters -------------------- */
-
-static struct tc6387xb_platform_data e330_tc6387xb_info = {
-       .enable   = &eseries_tmio_enable,
-       .disable  = &eseries_tmio_disable,
-       .suspend  = &eseries_tmio_suspend,
-       .resume   = &eseries_tmio_resume,
-};
-
-static struct platform_device e330_tc6387xb_device = {
-       .name           = "tc6387xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e330_tc6387xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* --------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e330_tc6387xb_device,
-};
-
-static void __init e330_init(void)
-{
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       eseries_register_clks();
-       eseries_get_tmio_gpios();
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E330, "Toshiba e330")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e330_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
deleted file mode 100644 (file)
index f50f055..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Hardware definitions for the Toshiba e350 PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/irqs.h>
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* -------------------- e350 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e350_t7l66xb_info = {
-       .irq_base               = IRQ_BOARD_START,
-       .enable                 = &eseries_tmio_enable,
-       .suspend                = &eseries_tmio_suspend,
-       .resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e350_t7l66xb_device = {
-       .name           = "t7l66xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e350_t7l66xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e350_t7l66xb_device,
-};
-
-static void __init e350_init(void)
-{
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       eseries_register_clks();
-       eseries_get_tmio_gpios();
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E350, "Toshiba e350")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e350_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
deleted file mode 100644 (file)
index 55b950f..0000000
+++ /dev/null
@@ -1,155 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/t7l66xb.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/pxafb.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ E400 LCD definitions ------------------------ */
-
-static struct pxafb_mode_info e400_pxafb_mode_info = {
-       .pixclock       = 140703,
-       .xres           = 240,
-       .yres           = 320,
-       .bpp            = 16,
-       .hsync_len      = 4,
-       .left_margin    = 28,
-       .right_margin   = 8,
-       .vsync_len      = 3,
-       .upper_margin   = 5,
-       .lower_margin   = 6,
-       .sync           = 0,
-};
-
-static struct pxafb_mach_info e400_pxafb_mach_info = {
-       .modes          = &e400_pxafb_mode_info,
-       .num_modes      = 1,
-       .lcd_conn       = LCD_COLOR_TFT_16BPP,
-       .lccr3          = 0,
-       .pxafb_backlight_power  = NULL,
-};
-
-/* ------------------------ E400 MFP config ----------------------------- */
-
-static unsigned long e400_pin_config[] __initdata = {
-       /* Chip selects */
-       GPIO15_nCS_1,   /* CS1 - Flash */
-       GPIO80_nCS_4,   /* CS4 - TMIO */
-
-       /* Clocks */
-       GPIO12_32KHz,
-
-       /* BTUART */
-       GPIO42_BTUART_RXD,
-       GPIO43_BTUART_TXD,
-       GPIO44_BTUART_CTS,
-
-       /* TMIO controller */
-       GPIO19_GPIO, /* t7l66xb #PCLR */
-       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-       /* wakeup */
-       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ---------------------------------------------------------------------- */
-
-static struct mtd_partition partition_a = {
-       .name = "Internal NAND flash",
-       .offset =  0,
-       .size =  MTDPART_SIZ_FULL,
-};
-
-static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
-
-static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
-       .options = 0,
-       .offs = 4,
-       .len = 2,
-       .pattern = scan_ff_pattern
-};
-
-static struct tmio_nand_data e400_t7l66xb_nand_config = {
-       .num_partitions = 1,
-       .partition = &partition_a,
-       .badblock_pattern = &e400_t7l66xb_nand_bbt,
-};
-
-static struct t7l66xb_platform_data e400_t7l66xb_info = {
-       .irq_base               = IRQ_BOARD_START,
-       .enable                 = &eseries_tmio_enable,
-       .suspend                = &eseries_tmio_suspend,
-       .resume                 = &eseries_tmio_resume,
-
-       .nand_data              = &e400_t7l66xb_nand_config,
-};
-
-static struct platform_device e400_t7l66xb_device = {
-       .name           = "t7l66xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e400_t7l66xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* ---------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e400_t7l66xb_device,
-};
-
-static void __init e400_init(void)
-{
-       pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       /* Fixme - e400 may have a switched clock */
-       eseries_register_clks();
-       eseries_get_tmio_gpios();
-       set_pxa_fb_info(&e400_pxafb_mach_info);
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e7xx_udc_mach_info);
-}
-
-MACHINE_START(E400, "Toshiba e400")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e400_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
deleted file mode 100644 (file)
index d578021..0000000
+++ /dev/null
@@ -1,225 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/mfd/t7l66xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-#include "devices.h"
-
-/* ------------------------ e740 video support --------------------------- */
-
-static struct w100_gen_regs e740_lcd_regs = {
-       .lcd_format =            0x00008023,
-       .lcdd_cntl1 =            0x0f000000,
-       .lcdd_cntl2 =            0x0003ffff,
-       .genlcd_cntl1 =          0x00ffff03,
-       .genlcd_cntl2 =          0x003c0f03,
-       .genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e740_lcd_mode = {
-       .xres            = 240,
-       .yres            = 320,
-       .left_margin     = 20,
-       .right_margin    = 28,
-       .upper_margin    = 9,
-       .lower_margin    = 8,
-       .crtc_ss         = 0x80140013,
-       .crtc_ls         = 0x81150110,
-       .crtc_gs         = 0x80050005,
-       .crtc_vpos_gs    = 0x000a0009,
-       .crtc_rev        = 0x0040010a,
-       .crtc_dclk       = 0xa906000a,
-       .crtc_gclk       = 0x80050108,
-       .crtc_goe        = 0x80050108,
-       .pll_freq        = 57,
-       .pixclk_divider         = 4,
-       .pixclk_divider_rotated = 4,
-       .pixclk_src     = CLK_SRC_XTAL,
-       .sysclk_divider  = 1,
-       .sysclk_src     = CLK_SRC_PLL,
-       .crtc_ps1_active =       0x41060010,
-};
-
-static struct w100_gpio_regs e740_w100_gpio_info = {
-       .init_data1 = 0x21002103,
-       .gpio_dir1  = 0xffffdeff,
-       .gpio_oe1   = 0x03c00643,
-       .init_data2 = 0x003f003f,
-       .gpio_dir2  = 0xffffffff,
-       .gpio_oe2   = 0x000000ff,
-};
-
-static struct w100fb_mach_info e740_fb_info = {
-       .modelist   = &e740_lcd_mode,
-       .num_modes  = 1,
-       .regs       = &e740_lcd_regs,
-       .gpio       = &e740_w100_gpio_info,
-       .xtal_freq = 14318000,
-       .xtal_dbl   = 1,
-};
-
-static struct resource e740_fb_resources[] = {
-       [0] = {
-               .start          = 0x0c000000,
-               .end            = 0x0cffffff,
-               .flags          = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device e740_fb_device = {
-       .name           = "w100fb",
-       .id             = -1,
-       .dev            = {
-               .platform_data  = &e740_fb_info,
-       },
-       .num_resources  = ARRAY_SIZE(e740_fb_resources),
-       .resource       = e740_fb_resources,
-};
-
-/* --------------------------- MFP Pin config -------------------------- */
-
-static unsigned long e740_pin_config[] __initdata = {
-       /* Chip selects */
-       GPIO15_nCS_1,   /* CS1 - Flash */
-       GPIO79_nCS_3,   /* CS3 - IMAGEON */
-       GPIO80_nCS_4,   /* CS4 - TMIO */
-
-       /* Clocks */
-       GPIO12_32KHz,
-
-       /* BTUART */
-       GPIO42_BTUART_RXD,
-       GPIO43_BTUART_TXD,
-       GPIO44_BTUART_CTS,
-
-       /* TMIO controller */
-       GPIO19_GPIO, /* t7l66xb #PCLR */
-       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-       /* UDC */
-       GPIO13_GPIO,
-       GPIO3_GPIO,
-
-       /* IrDA */
-       GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-       /* AC97 */
-       GPIO28_AC97_BITCLK,
-       GPIO29_AC97_SDATA_IN_0,
-       GPIO30_AC97_SDATA_OUT,
-       GPIO31_AC97_SYNC,
-
-       /* Audio power control */
-       GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
-       GPIO40_GPIO,  /* Mic amp power */
-       GPIO41_GPIO,  /* Headphone amp power */
-
-       /* PC Card */
-       GPIO8_GPIO,   /* CD0 */
-       GPIO44_GPIO,  /* CD1 */
-       GPIO11_GPIO,  /* IRQ0 */
-       GPIO6_GPIO,   /* IRQ1 */
-       GPIO27_GPIO,  /* RST0 */
-       GPIO24_GPIO,  /* RST1 */
-       GPIO20_GPIO,  /* PWR0 */
-       GPIO23_GPIO,  /* PWR1 */
-       GPIO48_nPOE,
-       GPIO49_nPWE,
-       GPIO50_nPIOR,
-       GPIO51_nPIOW,
-       GPIO52_nPCE_1,
-       GPIO53_nPCE_2,
-       GPIO54_nPSKTSEL,
-       GPIO55_nPREG,
-       GPIO56_nPWAIT,
-       GPIO57_nIOIS16,
-
-       /* wakeup */
-       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* -------------------- e740 t7l66xb parameters -------------------- */
-
-static struct t7l66xb_platform_data e740_t7l66xb_info = {
-       .irq_base               = IRQ_BOARD_START,
-       .enable                 = &eseries_tmio_enable,
-       .suspend                = &eseries_tmio_suspend,
-       .resume                 = &eseries_tmio_resume,
-};
-
-static struct platform_device e740_t7l66xb_device = {
-       .name           = "t7l66xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e740_t7l66xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e740_fb_device,
-       &e740_t7l66xb_device,
-};
-
-static void __init e740_init(void)
-{
-       pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       eseries_register_clks();
-       clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
-                       "UDCCLK", &pxa25x_device_udc.dev),
-       eseries_get_tmio_gpios();
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e7xx_udc_mach_info);
-       pxa_set_ac97_info(NULL);
-       pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E740, "Toshiba e740")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e740_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
deleted file mode 100644 (file)
index af83caa..0000000
+++ /dev/null
@@ -1,226 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irda.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ---------------------- E750 LCD definitions -------------------- */
-
-static struct w100_gen_regs e750_lcd_regs = {
-       .lcd_format =            0x00008003,
-       .lcdd_cntl1 =            0x00000000,
-       .lcdd_cntl2 =            0x0003ffff,
-       .genlcd_cntl1 =          0x00fff003,
-       .genlcd_cntl2 =          0x003c0f03,
-       .genlcd_cntl3 =          0x000143aa,
-};
-
-static struct w100_mode e750_lcd_mode = {
-       .xres            = 240,
-       .yres            = 320,
-       .left_margin     = 21,
-       .right_margin    = 22,
-       .upper_margin    = 5,
-       .lower_margin    = 4,
-       .crtc_ss         = 0x80150014,
-       .crtc_ls         = 0x8014000d,
-       .crtc_gs         = 0xc1000005,
-       .crtc_vpos_gs    = 0x00020147,
-       .crtc_rev        = 0x0040010a,
-       .crtc_dclk       = 0xa1700030,
-       .crtc_gclk       = 0x80cc0015,
-       .crtc_goe        = 0x80cc0015,
-       .crtc_ps1_active = 0x61060017,
-       .pll_freq        = 57,
-       .pixclk_divider         = 4,
-       .pixclk_divider_rotated = 4,
-       .pixclk_src     = CLK_SRC_XTAL,
-       .sysclk_divider  = 1,
-       .sysclk_src     = CLK_SRC_PLL,
-};
-
-static struct w100_gpio_regs e750_w100_gpio_info = {
-       .init_data1 = 0x01192f1b,
-       .gpio_dir1  = 0xd5ffdeff,
-       .gpio_oe1   = 0x000020bf,
-       .init_data2 = 0x010f010f,
-       .gpio_dir2  = 0xffffffff,
-       .gpio_oe2   = 0x000001cf,
-};
-
-static struct w100fb_mach_info e750_fb_info = {
-       .modelist   = &e750_lcd_mode,
-       .num_modes  = 1,
-       .regs       = &e750_lcd_regs,
-       .gpio       = &e750_w100_gpio_info,
-       .xtal_freq  = 14318000,
-       .xtal_dbl   = 1,
-};
-
-static struct resource e750_fb_resources[] = {
-       [0] = {
-               .start          = 0x0c000000,
-               .end            = 0x0cffffff,
-               .flags          = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device e750_fb_device = {
-       .name           = "w100fb",
-       .id             = -1,
-       .dev            = {
-               .platform_data  = &e750_fb_info,
-       },
-       .num_resources  = ARRAY_SIZE(e750_fb_resources),
-       .resource       = e750_fb_resources,
-};
-
-/* -------------------- e750 MFP parameters -------------------- */
-
-static unsigned long e750_pin_config[] __initdata = {
-       /* Chip selects */
-       GPIO15_nCS_1,   /* CS1 - Flash */
-       GPIO79_nCS_3,   /* CS3 - IMAGEON */
-       GPIO80_nCS_4,   /* CS4 - TMIO */
-
-       /* Clocks */
-       GPIO11_3_6MHz,
-
-       /* BTUART */
-       GPIO42_BTUART_RXD,
-       GPIO43_BTUART_TXD,
-       GPIO44_BTUART_CTS,
-
-       /* TMIO controller */
-       GPIO19_GPIO, /* t7l66xb #PCLR */
-       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
-
-       /* UDC */
-       GPIO13_GPIO,
-       GPIO3_GPIO,
-
-       /* IrDA */
-       GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
-
-       /* AC97 */
-       GPIO28_AC97_BITCLK,
-       GPIO29_AC97_SDATA_IN_0,
-       GPIO30_AC97_SDATA_OUT,
-       GPIO31_AC97_SYNC,
-
-       /* Audio power control */
-       GPIO4_GPIO,  /* Headphone amp power */
-       GPIO7_GPIO,  /* Speaker amp power */
-       GPIO37_GPIO, /* Headphone detect */
-
-       /* PC Card */
-       GPIO8_GPIO,   /* CD0 */
-       GPIO44_GPIO,  /* CD1 */
-       GPIO11_GPIO,  /* IRQ0 */
-       GPIO6_GPIO,   /* IRQ1 */
-       GPIO27_GPIO,  /* RST0 */
-       GPIO24_GPIO,  /* RST1 */
-       GPIO20_GPIO,  /* PWR0 */
-       GPIO23_GPIO,  /* PWR1 */
-       GPIO48_nPOE,
-       GPIO49_nPWE,
-       GPIO50_nPIOR,
-       GPIO51_nPIOW,
-       GPIO52_nPCE_1,
-       GPIO53_nPCE_2,
-       GPIO54_nPSKTSEL,
-       GPIO55_nPREG,
-       GPIO56_nPWAIT,
-       GPIO57_nIOIS16,
-
-       /* wakeup */
-       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
-};
-
-/* ----------------- e750 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e750_tc6393xb_info = {
-       .irq_base       = IRQ_BOARD_START,
-       .scr_pll2cr     = 0x0cc1,
-       .scr_gper       = 0,
-       .gpio_base      = -1,
-       .suspend        = &eseries_tmio_suspend,
-       .resume         = &eseries_tmio_resume,
-       .enable         = &eseries_tmio_enable,
-       .disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e750_tc6393xb_device = {
-       .name           = "tc6393xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e750_tc6393xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* ------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e750_fb_device,
-       &e750_tc6393xb_device,
-};
-
-static void __init e750_init(void)
-{
-       pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
-                       "GPIO11_CLK", NULL),
-       eseries_get_tmio_gpios();
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e7xx_udc_mach_info);
-       pxa_set_ac97_info(NULL);
-       pxa_set_ficp_info(&e7xx_ficp_platform_data);
-}
-
-MACHINE_START(E750, "Toshiba e750")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e750_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
deleted file mode 100644 (file)
index 8ea97bf..0000000
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Hardware definitions for the Toshiba eseries PDAs
- *
- * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
- *
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/fb.h>
-#include <linux/mfd/tc6393xb.h>
-
-#include <video/w100fb.h>
-
-#include <asm/setup.h>
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <mach/pxa25x.h>
-#include <mach/eseries-gpio.h>
-#include <mach/udc.h>
-#include <mach/irqs.h>
-#include <mach/audio.h>
-
-#include "generic.h"
-#include "eseries.h"
-#include "clock.h"
-
-/* ------------------------ e800 LCD definitions ------------------------- */
-
-static unsigned long e800_pin_config[] __initdata = {
-       /* AC97 */
-       GPIO28_AC97_BITCLK,
-       GPIO29_AC97_SDATA_IN_0,
-       GPIO30_AC97_SDATA_OUT,
-       GPIO31_AC97_SYNC,
-};
-
-static struct w100_gen_regs e800_lcd_regs = {
-       .lcd_format =            0x00008003,
-       .lcdd_cntl1 =            0x02a00000,
-       .lcdd_cntl2 =            0x0003ffff,
-       .genlcd_cntl1 =          0x000ff2a3,
-       .genlcd_cntl2 =          0x000002a3,
-       .genlcd_cntl3 =          0x000102aa,
-};
-
-static struct w100_mode e800_lcd_mode[2] = {
-       [0] = {
-               .xres            = 480,
-               .yres            = 640,
-               .left_margin     = 52,
-               .right_margin    = 148,
-               .upper_margin    = 2,
-               .lower_margin    = 6,
-               .crtc_ss         = 0x80350034,
-               .crtc_ls         = 0x802b0026,
-               .crtc_gs         = 0x80160016,
-               .crtc_vpos_gs    = 0x00020003,
-               .crtc_rev        = 0x0040001d,
-               .crtc_dclk       = 0xe0000000,
-               .crtc_gclk       = 0x82a50049,
-               .crtc_goe        = 0x80ee001c,
-               .crtc_ps1_active = 0x00000000,
-               .pll_freq        = 128,
-               .pixclk_divider         = 4,
-               .pixclk_divider_rotated = 6,
-               .pixclk_src     = CLK_SRC_PLL,
-               .sysclk_divider  = 0,
-               .sysclk_src     = CLK_SRC_PLL,
-       },
-       [1] = {
-               .xres            = 240,
-               .yres            = 320,
-               .left_margin     = 15,
-               .right_margin    = 88,
-               .upper_margin    = 0,
-               .lower_margin    = 7,
-               .crtc_ss         = 0xd010000f,
-               .crtc_ls         = 0x80070003,
-               .crtc_gs         = 0x80000000,
-               .crtc_vpos_gs    = 0x01460147,
-               .crtc_rev        = 0x00400003,
-               .crtc_dclk       = 0xa1700030,
-               .crtc_gclk       = 0x814b0008,
-               .crtc_goe        = 0x80cc0015,
-               .crtc_ps1_active = 0x00000000,
-               .pll_freq        = 100,
-               .pixclk_divider         = 6, /* Wince uses 14 which gives a */
-               .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
-               .pixclk_src     = CLK_SRC_PLL,
-               .sysclk_divider  = 0,
-               .sysclk_src     = CLK_SRC_PLL,
-       }
-};
-
-
-static struct w100_gpio_regs e800_w100_gpio_info = {
-       .init_data1 = 0xc13fc019,
-       .gpio_dir1  = 0x3e40df7f,
-       .gpio_oe1   = 0x003c3000,
-       .init_data2 = 0x00000000,
-       .gpio_dir2  = 0x00000000,
-       .gpio_oe2   = 0x00000000,
-};
-
-static struct w100_mem_info e800_w100_mem_info = {
-       .ext_cntl        = 0x09640011,
-       .sdram_mode_reg  = 0x00600021,
-       .ext_timing_cntl = 0x10001545,
-       .io_cntl         = 0x7ddd7333,
-       .size            = 0x1fffff,
-};
-
-static void e800_tg_change(struct w100fb_par *par)
-{
-       unsigned long tmp;
-
-       tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
-       if (par->mode->xres == 480)
-               tmp |= 0x100;
-       else
-               tmp &= ~0x100;
-       w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
-}
-
-static struct w100_tg_info e800_tg_info = {
-       .change = e800_tg_change,
-};
-
-static struct w100fb_mach_info e800_fb_info = {
-       .modelist   = e800_lcd_mode,
-       .num_modes  = 2,
-       .regs       = &e800_lcd_regs,
-       .gpio       = &e800_w100_gpio_info,
-       .mem        = &e800_w100_mem_info,
-       .tg         = &e800_tg_info,
-       .xtal_freq  = 16000000,
-};
-
-static struct resource e800_fb_resources[] = {
-       [0] = {
-               .start          = 0x0c000000,
-               .end            = 0x0cffffff,
-               .flags          = IORESOURCE_MEM,
-       },
-};
-
-static struct platform_device e800_fb_device = {
-       .name           = "w100fb",
-       .id             = -1,
-       .dev            = {
-               .platform_data  = &e800_fb_info,
-       },
-       .num_resources  = ARRAY_SIZE(e800_fb_resources),
-       .resource       = e800_fb_resources,
-};
-
-/* --------------------------- UDC definitions --------------------------- */
-
-static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
-       .gpio_vbus   = GPIO_E800_USB_DISC,
-       .gpio_pullup = GPIO_E800_USB_PULLUP,
-       .gpio_pullup_inverted = 1
-};
-
-/* ----------------- e800 tc6393xb parameters ------------------ */
-
-static struct tc6393xb_platform_data e800_tc6393xb_info = {
-       .irq_base       = IRQ_BOARD_START,
-       .scr_pll2cr     = 0x0cc1,
-       .scr_gper       = 0,
-       .gpio_base      = -1,
-       .suspend        = &eseries_tmio_suspend,
-       .resume         = &eseries_tmio_resume,
-       .enable         = &eseries_tmio_enable,
-       .disable        = &eseries_tmio_disable,
-};
-
-static struct platform_device e800_tc6393xb_device = {
-       .name           = "tc6393xb",
-       .id             = -1,
-       .dev            = {
-               .platform_data = &e800_tc6393xb_info,
-       },
-       .num_resources = 2,
-       .resource      = eseries_tmio_resources,
-};
-
-/* ----------------------------------------------------------------------- */
-
-static struct platform_device *devices[] __initdata = {
-       &e800_fb_device,
-       &e800_tc6393xb_device,
-};
-
-static void __init e800_init(void)
-{
-       pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
-       pxa_set_ffuart_info(NULL);
-       pxa_set_btuart_info(NULL);
-       pxa_set_stuart_info(NULL);
-       clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
-                       "GPIO11_CLK", NULL),
-       eseries_get_tmio_gpios();
-       platform_add_devices(devices, ARRAY_SIZE(devices));
-       pxa_set_udc_info(&e800_udc_mach_info);
-       pxa_set_ac97_info(NULL);
-}
-
-MACHINE_START(E800, "Toshiba e800")
-       /* Maintainer: Ian Molton (spyro@f2s.com) */
-       .phys_io        = 0x40000000,
-       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-       .boot_params    = 0xa0000100,
-       .map_io         = pxa_map_io,
-       .init_irq       = pxa25x_init_irq,
-       .fixup          = eseries_fixup,
-       .init_machine   = e800_init,
-       .timer          = &pxa_timer,
-MACHINE_END
-
index 96ed13081639598335309b23b992751d27102ea5..1d67f027bea76a55d5a49aa844e8d89128654a85 100644 (file)
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/platform_device.h>
+#include <linux/mfd/tc6387xb.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/t7l66xb.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
 
 #include <mach/pxa25x.h>
 #include <mach/eseries-gpio.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
 #include <mach/udc.h>
 #include <mach/irda.h>
 
+#include "devices.h"
 #include "generic.h"
 #include "clock.h"
 
@@ -131,3 +141,802 @@ void eseries_register_clks(void)
        clkdev_add_table(eseries_clkregs, ARRAY_SIZE(eseries_clkregs));
 }
 
+#ifdef CONFIG_MACH_E330
+/* -------------------- e330 tc6387xb parameters -------------------- */
+
+static struct tc6387xb_platform_data e330_tc6387xb_info = {
+       .enable   = &eseries_tmio_enable,
+       .disable  = &eseries_tmio_disable,
+       .suspend  = &eseries_tmio_suspend,
+       .resume   = &eseries_tmio_resume,
+};
+
+static struct platform_device e330_tc6387xb_device = {
+       .name           = "tc6387xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e330_tc6387xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* --------------------------------------------------------------- */
+
+static struct platform_device *e330_devices[] __initdata = {
+       &e330_tc6387xb_device,
+};
+
+static void __init e330_init(void)
+{
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       eseries_register_clks();
+       eseries_get_tmio_gpios();
+       platform_add_devices(ARRAY_AND_SIZE(e330_devices));
+       pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e330_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E350
+/* -------------------- e350 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e350_t7l66xb_info = {
+       .irq_base               = IRQ_BOARD_START,
+       .enable                 = &eseries_tmio_enable,
+       .suspend                = &eseries_tmio_suspend,
+       .resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e350_t7l66xb_device = {
+       .name           = "t7l66xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e350_t7l66xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e350_devices[] __initdata = {
+       &e350_t7l66xb_device,
+};
+
+static void __init e350_init(void)
+{
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       eseries_register_clks();
+       eseries_get_tmio_gpios();
+       platform_add_devices(ARRAY_AND_SIZE(e350_devices));
+       pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e350_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E400
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+       .pixclock       = 140703,
+       .xres           = 240,
+       .yres           = 320,
+       .bpp            = 16,
+       .hsync_len      = 4,
+       .left_margin    = 28,
+       .right_margin   = 8,
+       .vsync_len      = 3,
+       .upper_margin   = 5,
+       .lower_margin   = 6,
+       .sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+       .modes          = &e400_pxafb_mode_info,
+       .num_modes      = 1,
+       .lcd_conn       = LCD_COLOR_TFT_16BPP,
+       .lccr3          = 0,
+       .pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+       /* Chip selects */
+       GPIO15_nCS_1,   /* CS1 - Flash */
+       GPIO80_nCS_4,   /* CS4 - TMIO */
+
+       /* Clocks */
+       GPIO12_32KHz,
+
+       /* BTUART */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+
+       /* TMIO controller */
+       GPIO19_GPIO, /* t7l66xb #PCLR */
+       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+       /* wakeup */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static struct mtd_partition partition_a = {
+       .name = "Internal NAND flash",
+       .offset =  0,
+       .size =  MTDPART_SIZ_FULL,
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr e400_t7l66xb_nand_bbt = {
+       .options = 0,
+       .offs = 4,
+       .len = 2,
+       .pattern = scan_ff_pattern
+};
+
+static struct tmio_nand_data e400_t7l66xb_nand_config = {
+       .num_partitions = 1,
+       .partition = &partition_a,
+       .badblock_pattern = &e400_t7l66xb_nand_bbt,
+};
+
+static struct t7l66xb_platform_data e400_t7l66xb_info = {
+       .irq_base               = IRQ_BOARD_START,
+       .enable                 = &eseries_tmio_enable,
+       .suspend                = &eseries_tmio_suspend,
+       .resume                 = &eseries_tmio_resume,
+
+       .nand_data              = &e400_t7l66xb_nand_config,
+};
+
+static struct platform_device e400_t7l66xb_device = {
+       .name           = "t7l66xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e400_t7l66xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* ---------------------------------------------------------- */
+
+static struct platform_device *e400_devices[] __initdata = {
+       &e400_t7l66xb_device,
+};
+
+static void __init e400_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       /* Fixme - e400 may have a switched clock */
+       eseries_register_clks();
+       eseries_get_tmio_gpios();
+       set_pxa_fb_info(&e400_pxafb_mach_info);
+       platform_add_devices(ARRAY_AND_SIZE(e400_devices));
+       pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e400_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E740
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+       .lcd_format =            0x00008023,
+       .lcdd_cntl1 =            0x0f000000,
+       .lcdd_cntl2 =            0x0003ffff,
+       .genlcd_cntl1 =          0x00ffff03,
+       .genlcd_cntl2 =          0x003c0f03,
+       .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+       .xres            = 240,
+       .yres            = 320,
+       .left_margin     = 20,
+       .right_margin    = 28,
+       .upper_margin    = 9,
+       .lower_margin    = 8,
+       .crtc_ss         = 0x80140013,
+       .crtc_ls         = 0x81150110,
+       .crtc_gs         = 0x80050005,
+       .crtc_vpos_gs    = 0x000a0009,
+       .crtc_rev        = 0x0040010a,
+       .crtc_dclk       = 0xa906000a,
+       .crtc_gclk       = 0x80050108,
+       .crtc_goe        = 0x80050108,
+       .pll_freq        = 57,
+       .pixclk_divider         = 4,
+       .pixclk_divider_rotated = 4,
+       .pixclk_src     = CLK_SRC_XTAL,
+       .sysclk_divider  = 1,
+       .sysclk_src     = CLK_SRC_PLL,
+       .crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+       .init_data1 = 0x21002103,
+       .gpio_dir1  = 0xffffdeff,
+       .gpio_oe1   = 0x03c00643,
+       .init_data2 = 0x003f003f,
+       .gpio_dir2  = 0xffffffff,
+       .gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+       .modelist   = &e740_lcd_mode,
+       .num_modes  = 1,
+       .regs       = &e740_lcd_regs,
+       .gpio       = &e740_w100_gpio_info,
+       .xtal_freq = 14318000,
+       .xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+       [0] = {
+               .start          = 0x0c000000,
+               .end            = 0x0cffffff,
+               .flags          = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device e740_fb_device = {
+       .name           = "w100fb",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &e740_fb_info,
+       },
+       .num_resources  = ARRAY_SIZE(e740_fb_resources),
+       .resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+       /* Chip selects */
+       GPIO15_nCS_1,   /* CS1 - Flash */
+       GPIO79_nCS_3,   /* CS3 - IMAGEON */
+       GPIO80_nCS_4,   /* CS4 - TMIO */
+
+       /* Clocks */
+       GPIO12_32KHz,
+
+       /* BTUART */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+
+       /* TMIO controller */
+       GPIO19_GPIO, /* t7l66xb #PCLR */
+       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+       /* UDC */
+       GPIO13_GPIO,
+       GPIO3_GPIO,
+
+       /* IrDA */
+       GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+       /* AC97 */
+       GPIO28_AC97_BITCLK,
+       GPIO29_AC97_SDATA_IN_0,
+       GPIO30_AC97_SDATA_OUT,
+       GPIO31_AC97_SYNC,
+
+       /* Audio power control */
+       GPIO16_GPIO,  /* AC97 codec AVDD2 supply (analogue power) */
+       GPIO40_GPIO,  /* Mic amp power */
+       GPIO41_GPIO,  /* Headphone amp power */
+
+       /* PC Card */
+       GPIO8_GPIO,   /* CD0 */
+       GPIO44_GPIO,  /* CD1 */
+       GPIO11_GPIO,  /* IRQ0 */
+       GPIO6_GPIO,   /* IRQ1 */
+       GPIO27_GPIO,  /* RST0 */
+       GPIO24_GPIO,  /* RST1 */
+       GPIO20_GPIO,  /* PWR0 */
+       GPIO23_GPIO,  /* PWR1 */
+       GPIO48_nPOE,
+       GPIO49_nPWE,
+       GPIO50_nPIOR,
+       GPIO51_nPIOW,
+       GPIO52_nPCE_1,
+       GPIO53_nPCE_2,
+       GPIO54_nPSKTSEL,
+       GPIO55_nPREG,
+       GPIO56_nPWAIT,
+       GPIO57_nIOIS16,
+
+       /* wakeup */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* -------------------- e740 t7l66xb parameters -------------------- */
+
+static struct t7l66xb_platform_data e740_t7l66xb_info = {
+       .irq_base               = IRQ_BOARD_START,
+       .enable                 = &eseries_tmio_enable,
+       .suspend                = &eseries_tmio_suspend,
+       .resume                 = &eseries_tmio_resume,
+};
+
+static struct platform_device e740_t7l66xb_device = {
+       .name           = "t7l66xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e740_t7l66xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e740_devices[] __initdata = {
+       &e740_fb_device,
+       &e740_t7l66xb_device,
+};
+
+static void __init e740_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       eseries_register_clks();
+       clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
+                       "UDCCLK", &pxa25x_device_udc.dev),
+       eseries_get_tmio_gpios();
+       platform_add_devices(ARRAY_AND_SIZE(e740_devices));
+       pxa_set_udc_info(&e7xx_udc_mach_info);
+       pxa_set_ac97_info(NULL);
+       pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e740_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E750
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+       .lcd_format =            0x00008003,
+       .lcdd_cntl1 =            0x00000000,
+       .lcdd_cntl2 =            0x0003ffff,
+       .genlcd_cntl1 =          0x00fff003,
+       .genlcd_cntl2 =          0x003c0f03,
+       .genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+       .xres            = 240,
+       .yres            = 320,
+       .left_margin     = 21,
+       .right_margin    = 22,
+       .upper_margin    = 5,
+       .lower_margin    = 4,
+       .crtc_ss         = 0x80150014,
+       .crtc_ls         = 0x8014000d,
+       .crtc_gs         = 0xc1000005,
+       .crtc_vpos_gs    = 0x00020147,
+       .crtc_rev        = 0x0040010a,
+       .crtc_dclk       = 0xa1700030,
+       .crtc_gclk       = 0x80cc0015,
+       .crtc_goe        = 0x80cc0015,
+       .crtc_ps1_active = 0x61060017,
+       .pll_freq        = 57,
+       .pixclk_divider         = 4,
+       .pixclk_divider_rotated = 4,
+       .pixclk_src     = CLK_SRC_XTAL,
+       .sysclk_divider  = 1,
+       .sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+       .init_data1 = 0x01192f1b,
+       .gpio_dir1  = 0xd5ffdeff,
+       .gpio_oe1   = 0x000020bf,
+       .init_data2 = 0x010f010f,
+       .gpio_dir2  = 0xffffffff,
+       .gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+       .modelist   = &e750_lcd_mode,
+       .num_modes  = 1,
+       .regs       = &e750_lcd_regs,
+       .gpio       = &e750_w100_gpio_info,
+       .xtal_freq  = 14318000,
+       .xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+       [0] = {
+               .start          = 0x0c000000,
+               .end            = 0x0cffffff,
+               .flags          = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device e750_fb_device = {
+       .name           = "w100fb",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &e750_fb_info,
+       },
+       .num_resources  = ARRAY_SIZE(e750_fb_resources),
+       .resource       = e750_fb_resources,
+};
+
+/* -------------------- e750 MFP parameters -------------------- */
+
+static unsigned long e750_pin_config[] __initdata = {
+       /* Chip selects */
+       GPIO15_nCS_1,   /* CS1 - Flash */
+       GPIO79_nCS_3,   /* CS3 - IMAGEON */
+       GPIO80_nCS_4,   /* CS4 - TMIO */
+
+       /* Clocks */
+       GPIO11_3_6MHz,
+
+       /* BTUART */
+       GPIO42_BTUART_RXD,
+       GPIO43_BTUART_TXD,
+       GPIO44_BTUART_CTS,
+
+       /* TMIO controller */
+       GPIO19_GPIO, /* t7l66xb #PCLR */
+       GPIO45_GPIO, /* t7l66xb #SUSPEND (NOT BTUART!) */
+
+       /* UDC */
+       GPIO13_GPIO,
+       GPIO3_GPIO,
+
+       /* IrDA */
+       GPIO38_GPIO | MFP_LPM_DRIVE_HIGH,
+
+       /* AC97 */
+       GPIO28_AC97_BITCLK,
+       GPIO29_AC97_SDATA_IN_0,
+       GPIO30_AC97_SDATA_OUT,
+       GPIO31_AC97_SYNC,
+
+       /* Audio power control */
+       GPIO4_GPIO,  /* Headphone amp power */
+       GPIO7_GPIO,  /* Speaker amp power */
+       GPIO37_GPIO, /* Headphone detect */
+
+       /* PC Card */
+       GPIO8_GPIO,   /* CD0 */
+       GPIO44_GPIO,  /* CD1 */
+       GPIO11_GPIO,  /* IRQ0 */
+       GPIO6_GPIO,   /* IRQ1 */
+       GPIO27_GPIO,  /* RST0 */
+       GPIO24_GPIO,  /* RST1 */
+       GPIO20_GPIO,  /* PWR0 */
+       GPIO23_GPIO,  /* PWR1 */
+       GPIO48_nPOE,
+       GPIO49_nPWE,
+       GPIO50_nPIOR,
+       GPIO51_nPIOW,
+       GPIO52_nPCE_1,
+       GPIO53_nPCE_2,
+       GPIO54_nPSKTSEL,
+       GPIO55_nPREG,
+       GPIO56_nPWAIT,
+       GPIO57_nIOIS16,
+
+       /* wakeup */
+       GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------- e750 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e750_tc6393xb_info = {
+       .irq_base       = IRQ_BOARD_START,
+       .scr_pll2cr     = 0x0cc1,
+       .scr_gper       = 0,
+       .gpio_base      = -1,
+       .suspend        = &eseries_tmio_suspend,
+       .resume         = &eseries_tmio_resume,
+       .enable         = &eseries_tmio_enable,
+       .disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e750_tc6393xb_device = {
+       .name           = "tc6393xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e750_tc6393xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* ------------------------------------------------------------- */
+
+static struct platform_device *e750_devices[] __initdata = {
+       &e750_fb_device,
+       &e750_tc6393xb_device,
+};
+
+static void __init e750_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
+                       "GPIO11_CLK", NULL),
+       eseries_get_tmio_gpios();
+       platform_add_devices(ARRAY_AND_SIZE(e750_devices));
+       pxa_set_udc_info(&e7xx_udc_mach_info);
+       pxa_set_ac97_info(NULL);
+       pxa_set_ficp_info(&e7xx_ficp_platform_data);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e750_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_E800
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static unsigned long e800_pin_config[] __initdata = {
+       /* AC97 */
+       GPIO28_AC97_BITCLK,
+       GPIO29_AC97_SDATA_IN_0,
+       GPIO30_AC97_SDATA_OUT,
+       GPIO31_AC97_SYNC,
+};
+
+static struct w100_gen_regs e800_lcd_regs = {
+       .lcd_format =            0x00008003,
+       .lcdd_cntl1 =            0x02a00000,
+       .lcdd_cntl2 =            0x0003ffff,
+       .genlcd_cntl1 =          0x000ff2a3,
+       .genlcd_cntl2 =          0x000002a3,
+       .genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+       [0] = {
+               .xres            = 480,
+               .yres            = 640,
+               .left_margin     = 52,
+               .right_margin    = 148,
+               .upper_margin    = 2,
+               .lower_margin    = 6,
+               .crtc_ss         = 0x80350034,
+               .crtc_ls         = 0x802b0026,
+               .crtc_gs         = 0x80160016,
+               .crtc_vpos_gs    = 0x00020003,
+               .crtc_rev        = 0x0040001d,
+               .crtc_dclk       = 0xe0000000,
+               .crtc_gclk       = 0x82a50049,
+               .crtc_goe        = 0x80ee001c,
+               .crtc_ps1_active = 0x00000000,
+               .pll_freq        = 128,
+               .pixclk_divider         = 4,
+               .pixclk_divider_rotated = 6,
+               .pixclk_src     = CLK_SRC_PLL,
+               .sysclk_divider  = 0,
+               .sysclk_src     = CLK_SRC_PLL,
+       },
+       [1] = {
+               .xres            = 240,
+               .yres            = 320,
+               .left_margin     = 15,
+               .right_margin    = 88,
+               .upper_margin    = 0,
+               .lower_margin    = 7,
+               .crtc_ss         = 0xd010000f,
+               .crtc_ls         = 0x80070003,
+               .crtc_gs         = 0x80000000,
+               .crtc_vpos_gs    = 0x01460147,
+               .crtc_rev        = 0x00400003,
+               .crtc_dclk       = 0xa1700030,
+               .crtc_gclk       = 0x814b0008,
+               .crtc_goe        = 0x80cc0015,
+               .crtc_ps1_active = 0x00000000,
+               .pll_freq        = 100,
+               .pixclk_divider         = 6, /* Wince uses 14 which gives a */
+               .pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+               .pixclk_src     = CLK_SRC_PLL,
+               .sysclk_divider  = 0,
+               .sysclk_src     = CLK_SRC_PLL,
+       }
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+       .init_data1 = 0xc13fc019,
+       .gpio_dir1  = 0x3e40df7f,
+       .gpio_oe1   = 0x003c3000,
+       .init_data2 = 0x00000000,
+       .gpio_dir2  = 0x00000000,
+       .gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+       .ext_cntl        = 0x09640011,
+       .sdram_mode_reg  = 0x00600021,
+       .ext_timing_cntl = 0x10001545,
+       .io_cntl         = 0x7ddd7333,
+       .size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+       unsigned long tmp;
+
+       tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+       if (par->mode->xres == 480)
+               tmp |= 0x100;
+       else
+               tmp &= ~0x100;
+       w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+       .change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+       .modelist   = e800_lcd_mode,
+       .num_modes  = 2,
+       .regs       = &e800_lcd_regs,
+       .gpio       = &e800_w100_gpio_info,
+       .mem        = &e800_w100_mem_info,
+       .tg         = &e800_tg_info,
+       .xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+       [0] = {
+               .start          = 0x0c000000,
+               .end            = 0x0cffffff,
+               .flags          = IORESOURCE_MEM,
+       },
+};
+
+static struct platform_device e800_fb_device = {
+       .name           = "w100fb",
+       .id             = -1,
+       .dev            = {
+               .platform_data  = &e800_fb_info,
+       },
+       .num_resources  = ARRAY_SIZE(e800_fb_resources),
+       .resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+       .gpio_vbus   = GPIO_E800_USB_DISC,
+       .gpio_pullup = GPIO_E800_USB_PULLUP,
+       .gpio_pullup_inverted = 1
+};
+
+/* ----------------- e800 tc6393xb parameters ------------------ */
+
+static struct tc6393xb_platform_data e800_tc6393xb_info = {
+       .irq_base       = IRQ_BOARD_START,
+       .scr_pll2cr     = 0x0cc1,
+       .scr_gper       = 0,
+       .gpio_base      = -1,
+       .suspend        = &eseries_tmio_suspend,
+       .resume         = &eseries_tmio_resume,
+       .enable         = &eseries_tmio_enable,
+       .disable        = &eseries_tmio_disable,
+};
+
+static struct platform_device e800_tc6393xb_device = {
+       .name           = "tc6393xb",
+       .id             = -1,
+       .dev            = {
+               .platform_data = &e800_tc6393xb_info,
+       },
+       .num_resources = 2,
+       .resource      = eseries_tmio_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *e800_devices[] __initdata = {
+       &e800_fb_device,
+       &e800_tc6393xb_device,
+};
+
+static void __init e800_init(void)
+{
+       pxa2xx_mfp_config(ARRAY_AND_SIZE(e800_pin_config));
+       pxa_set_ffuart_info(NULL);
+       pxa_set_btuart_info(NULL);
+       pxa_set_stuart_info(NULL);
+       clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
+                       "GPIO11_CLK", NULL),
+       eseries_get_tmio_gpios();
+       platform_add_devices(ARRAY_AND_SIZE(e800_devices));
+       pxa_set_udc_info(&e800_udc_mach_info);
+       pxa_set_ac97_info(NULL);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+       /* Maintainer: Ian Molton (spyro@f2s.com) */
+       .phys_io        = 0x40000000,
+       .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+       .boot_params    = 0xa0000100,
+       .map_io         = pxa_map_io,
+       .init_irq       = pxa25x_init_irq,
+       .fixup          = eseries_fixup,
+       .init_machine   = e800_init,
+       .timer          = &pxa_timer,
+MACHINE_END
+#endif