*.out
*.png
*.gif
+*.svg
media-indices.tmpl
media-entities.tmpl
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
+ $(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9)
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
cat $(HTML) >> $(main_idx)
quiet_cmd_db2html = HTML $@
- cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
+ cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
quiet_cmd_db2man = MAN $@
- cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi
%.9 : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
<sect1><title>The Slab Cache</title>
!Iinclude/linux/slab.h
!Emm/slab.c
+!Emm/util.c
</sect1>
<sect1><title>User Space Memory Access</title>
!Iarch/x86/include/asm/uaccess_32.h
system and will otherwise use a linear domain mapping. The semantics
of this call are such that if an IRQ range is specified then
descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which meand
+specified it will fall through to irq_domain_add_linear() which means
*no* irq descriptors will be allocated.
A typical use case for simple domains is where an irqchip provider
As an added bonus you can customise the message creation toolbar menu
and put the "insert file" icon there.
-Make the the composer window wide enough so that no lines wrap. As of
+Make the composer window wide enough so that no lines wrap. As of
KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
the email if the lines wrap in the composer window. Having word wrapping
disabled in the Options menu isn't enough. Thus, if your patch has very
void io_mapping_unmap_atomic(void *vaddr)
- 'vaddr' must be the the value returned by the last
+ 'vaddr' must be the value returned by the last
io_mapping_map_atomic_wc call. This unmaps the specified
page and allows the task to sleep once again.
cgroup_disable= [KNL] Disable a particular controller
Format: {name of the controller(s) to disable}
- {Currently supported controllers - "memory"}
+ The effects of cgroup_disable=foo are:
+ - foo isn't auto-mounted if you mount all cgroups in
+ a single hierarchy
+ - foo isn't visible as an individually mountable
+ subsystem
+ {Currently only "memory" controller deal with this and
+ cut the overhead, others just disable the usage. So
+ only cgroup_disable=memory is actually worthy}
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
found. The count in 'mismatch_cnt' is the number of sectors
that were re-written, or (for 'check') would have been
re-written. As most raid levels work in units of pages rather
- than sectors, this my be larger than the number of actual errors
+ than sectors, this may be larger than the number of actual errors
by a factor of the number of sectors in a page.
bitmap_set_bits
depends on RFKILL || !RFKILL
to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
-case allows the driver to be built when rfkill is not configured, which which
+case allows the driver to be built when rfkill is not configured, which
case all rfkill API can still be used but will be provided by static inlines
which compile to almost nothing.
priority process is prevented from running by a lower priority process for
an undetermined amount of time.
-The classic example of unbounded priority inversion is were you have three
+The classic example of unbounded priority inversion is where you have three
processes, let's call them processes A, B, and C, where A is the highest
priority process, C is the lowest, and B is in between. A tries to grab a lock
that C owns and must wait and lets C run to release the lock. But in the
static_key_slow_dec(&key);
Thus, 'static_key_slow_inc()' means 'make the branch true', and
-'static_key_slow_dec()' means 'make the the branch false' with appropriate
+'static_key_slow_dec()' means 'make the branch false' with appropriate
reference counting. For example, if the key is initialized true, a
static_key_slow_dec(), will switch the branch to false. And a subsequent
static_key_slow_inc(), will change the branch back to true. Likewise, if the
If we then include the padding bytes, the jump label code saves, 16 total bytes
of instruction memory for this small function. In this case the non-jump label
-function is 80 bytes long. Thus, we have have saved 20% of the instruction
+function is 80 bytes long. Thus, we have saved 20% of the instruction
footprint. We can in fact improve this even further, since the 5-byte no-op
really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp.
However, we have not yet implemented optimal no-op sizes (they are currently
no_timer_check Don't check the IO-APIC timer. This can work around
problems with incorrect timer initialization on some boards.
-
- apicmaintimer Run time keeping from the local APIC timer instead
- of using the PIT/HPET interrupt for this. This is useful
- when the PIT/HPET interrupts are unreliable.
-
- noapicmaintimer Don't do time keeping using the APIC timer.
- Useful when this option was auto selected, but doesn't work.
-
apicpmtimer
Do APIC timer calibration using the pmtimer. Implies
apicmaintimer. Useful when your PIT timer is totally
on Enable(default)
off Disable
-SMP
-
- additional_cpus=NUM Allow NUM more CPUs for hotplug
- (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec)
-
NUMA
numa=off Only set up a single NUMA node spanning all memory.
kstack=N Print N words from the kernel stack in oops dumps.
- pagefaulttrace Dump all page faults. Only useful for extreme debugging
- and will create a lot of output.
-
- call_trace=[old|both|newfallback|new]
- old: use old inexact backtracer
- new: use new exact dwarf2 unwinder
- both: print entries from both
- newfallback: use new unwinder but fall back to old if it gets
- stuck (default)
-
Miscellaneous
nogbpages
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
+ carrier board, being the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
depends on X86_32 && X86_MCE
---help---
Include support for machine check handling on old Pentium 5 or WinChip
- systems. These typically need to be enabled explicitely on the command
+ systems. These typically need to be enabled explicitly on the command
line.
config X86_MCE_THRESHOLD
obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o
-obj-$(CONFIG_VIODASD) += viodasd.o
obj-$(CONFIG_BLK_DEV_SX8) += sx8.o
obj-$(CONFIG_BLK_DEV_HD) += hd.o
obj-$(CONFIG_PARIDE_PCD) += cdrom.o
obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o
-obj-$(CONFIG_VIOCD) += viocd.o cdrom.o
obj-$(CONFIG_GDROM) += gdrom.o cdrom.o
obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
-obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_IBM_BSR) += bsr.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
};
/*
- * MIF is the main control knob clock for exynox4x12 MIF/INT
+ * MIF is the main control knob clock for Exynos4x12 MIF/INT
* clock and voltage of both mif/int are controlled.
*/
static struct bus_opp_table exynos4x12_mifclk_table[] = {
* @pipe: a crtc index created at load() with a new crtc object creation
* and the crtc object would be set to private->crtc array
* to get a crtc object corresponding to this pipe from private->crtc
- * array when irq interrupt occured. the reason of using this pipe is that
+ * array when irq interrupt occurred. the reason of using this pipe is that
* drm framework doesn't support multiple irq yet.
- * we can refer to the crtc to current hardware interrupt occured through
+ * we can refer to the crtc to current hardware interrupt occurred through
* this pipe value.
* @dpms: store the crtc dpms value
* @mode: store the crtc mode value
* G2D interrupt event once current command list execution is
* finished.
* Otherwise only ACF bit should be set to INTEN register so
- * that one interrupt is occured after all command lists
+ * that one interrupt is occurred after all command lists
* have been completed.
*/
if (node->event) {
int ret;
/*
- * alocate memory to be used for framebuffer.
+ * allocate memory to be used for framebuffer.
* - this callback would be called by user application
* with DRM_IOCTL_MODE_CREATE_DUMB command.
*/
* @vma: a pointer to vm_area.
* @flags: indicate memory type to allocated buffer and cache attruibute.
*
- * P.S. this object would be transfered to user as kms_bo.handle so
+ * P.S. this object would be transferred to user as kms_bo.handle so
* user can access the buffer through kms_bo.handle.
*/
struct exynos_drm_gem_obj {
} else {
/*
* Getting ippdrv capability by ipp_id.
- * some deivce not supported wb, output interface.
+ * some device not supported wb, output interface.
* so, user application detect correct ipp driver
* using this ioctl.
*/
/*
* A structure of command node.
*
- * @priv: IPP private infomation.
+ * @priv: IPP private information.
* @list: list head to command queue information.
* @event_list: list head of event.
* @mem_list: list head to source,destination memory queue information.
};
/*
- * A structure of wb setting infomation.
+ * A structure of wb setting information.
*
* @enable: enable flag for wb.
* @refresh: HZ of the refresh rate.
This module may be used for special applications that require
cross connecting of bchannels, conferencing, dtmf decoding,
- echo cancelation, tone generation, and Blowfish encryption and
+ echo cancellation, tone generation, and Blowfish encryption and
decryption. It may use hardware features if available.
E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
Some devices support more than one LUN (Logical Unit Number) in order
to allow access to several media, e.g. CD jukebox, USB card reader,
mobile phone in mass storage mode. This option forces the kernel to
- probe for all LUNs by default. This setting can be overriden by
+ probe for all LUNs by default. This setting can be overridden by
max_luns boot/module parameter. Note that this option does not affect
- devices conforming to SCSI-3 or higher as they can explicitely report
+ devices conforming to SCSI-3 or higher as they can explicitly report
their number of LUNs. It is safe to say Y here unless you have one of
those rare devices which reacts in an unexpected way when probed for
multiple LUNs.
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
- msg.msg_namelen = 0;
msg.msg_flags = MSG_NOSIGNAL;
result = kernel_recvmsg(sock, &msg, &iov, 1, size, MSG_WAITALL);
To do that the driver parses the Power Management data and uploads
said information to the Xen hypervisor. Then the Xen hypervisor can
- select the proper Cx and Pxx states. It also registers itslef as the
+ select the proper Cx and Pxx states. It also registers itself as the
SMM so that other drivers (such as ACPI cpufreq scaling driver) will
not load.
* For use with the TRACE_EVENT macro:
*
* We define a tracepoint, its arguments, its printk format
- * and its 'fast binay record' layout.
+ * and its 'fast binary record' layout.
*
* Firstly, name your tracepoint via TRACE_EVENT(name : the
* 'subsystem_event' notation is fine.
dynticks subsystem by forcing the context tracking on all
CPUs in the system.
- Say Y only if you're working on the developpement of an
+ Say Y only if you're working on the development of an
architecture backend for the context tracking.
Say N otherwise, this option brings an overhead that you
* @rxqs: the number of RX subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
- * and performs basic initialization. Also allocates subquue structs
+ * and performs basic initialization. Also allocates subqueue structs
* for each queue on the device.
*/
struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
You can define here default value of the maximum number
of IP sets for the kernel.
- The value can be overriden by the 'max_sets' module
+ The value can be overridden by the 'max_sets' module
parameter of the 'ip_set' module.
config IP_SET_BITMAP_IP