#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/gpio-reg.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/irq.h>
struct gpio_chip *gpio[4];
};
+static struct gpiod_lookup_table neponset_pcmcia_table = {
+ .dev_id = "1800",
+ .table = {
+ GPIO_LOOKUP("sa1111", 1, "a0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 0, "a1vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("neponset-ncr", 5, "a0vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("neponset-ncr", 6, "a1vpp", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 2, "b0vcc", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("sa1111", 3, "b1vcc", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct neponset_drvdata *nep;
void neponset_ncr_frob(unsigned int mask, unsigned int val)
d->base + AUD_CTL, AUD_NGPIO, false,
neponset_aud_names);
+ gpiod_add_lookup_table(&neponset_pcmcia_table);
+
/*
* We would set IRQ_GPIO25 to be a wake-up IRQ, but unfortunately
* something on the Neponset activates this IRQ on sleep (eth?)
platform_device_unregister(d->sa1111);
if (!IS_ERR(d->smc91x))
platform_device_unregister(d->smc91x);
+
+ gpiod_remove_lookup_table(&neponset_pcmcia_table);
+
irq_set_chained_handler(irq, NULL);
irq_free_descs(d->irq_base, NEP_IRQ_NR);
nep = NULL;
#include <linux/errno.h>
#include <linux/init.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <mach/neponset.h>
-#include <asm/hardware/sa1111.h>
#include "sa1111_generic.h"
+#include "max1600.h"
/*
* Neponset uses the Maxim MAX1600, with the following connections:
* "Standard Intel code" mode. Refer to the Maxim data sheet for
* the corresponding truth table.
*/
-
-static int
-neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+static int neponset_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- struct sa1111_pcmcia_socket *s = to_skt(skt);
- unsigned int ncr_mask, ncr_set, pa_dwr_mask, pa_dwr_set;
+ struct max1600 *m;
int ret;
- switch (skt->nr) {
- case 0:
- pa_dwr_mask = GPIO_A0 | GPIO_A1;
- ncr_mask = NCR_A0VPP | NCR_A1VPP;
-
- if (state->Vpp == 0)
- ncr_set = 0;
- else if (state->Vpp == 120)
- ncr_set = NCR_A1VPP;
- else if (state->Vpp == state->Vcc)
- ncr_set = NCR_A0VPP;
- else {
- printk(KERN_ERR "%s(): unrecognized VPP %u\n",
- __func__, state->Vpp);
- return -1;
- }
- break;
-
- case 1:
- pa_dwr_mask = GPIO_A2 | GPIO_A3;
- ncr_mask = 0;
- ncr_set = 0;
-
- if (state->Vpp != state->Vcc && state->Vpp != 0) {
- printk(KERN_ERR "%s(): CF slot cannot support VPP %u\n",
- __func__, state->Vpp);
- return -1;
- }
- break;
+ ret = max1600_init(skt->socket.dev.parent, &m,
+ skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
+ MAX1600_CODE_LOW);
+ if (ret == 0)
+ skt->driver_data = m;
- default:
- return -1;
- }
+ return ret;
+}
- /*
- * pa_dwr_set is the mask for selecting Vcc on both sockets.
- * pa_dwr_mask selects which bits (and therefore socket) we change.
- */
- switch (state->Vcc) {
- default:
- case 0: pa_dwr_set = 0; break;
- case 33: pa_dwr_set = GPIO_A1|GPIO_A2; break;
- case 50: pa_dwr_set = GPIO_A0|GPIO_A3; break;
- }
+static int
+neponset_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
+{
+ struct max1600 *m = skt->driver_data;
+ int ret;
ret = sa1111_pcmcia_configure_socket(skt, state);
- if (ret == 0) {
- neponset_ncr_frob(ncr_mask, ncr_set);
- sa1111_set_io(s->dev, pa_dwr_mask, pa_dwr_set);
- }
+ if (ret == 0)
+ ret = max1600_configure(m, state->Vcc, state->Vpp);
return ret;
}
static struct pcmcia_low_level neponset_pcmcia_ops = {
.owner = THIS_MODULE,
+ .hw_init = neponset_pcmcia_hw_init,
.configure_socket = neponset_pcmcia_configure_socket,
.first = 0,
.nr = 2,
int pcmcia_neponset_init(struct sa1111_dev *sadev)
{
- /*
- * Set GPIO_A<3:0> to be outputs for the MAX1600,
- * and switch to standby mode.
- */
- sa1111_set_io_dir(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0, 0);
- sa1111_set_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
- sa1111_set_sleep_io(sadev, GPIO_A0|GPIO_A1|GPIO_A2|GPIO_A3, 0);
sa11xx_drv_pcmcia_ops(&neponset_pcmcia_ops);
return sa1111_pcmcia_add(sadev, &neponset_pcmcia_ops,
sa11xx_drv_pcmcia_add_one);