ARM: dts: AM33XX: don't redefine OCP bus and device nodes
authorJavier Martinez Canillas <javier.martinez@collabora.co.uk>
Fri, 20 Sep 2013 15:42:19 +0000 (17:42 +0200)
committerBenoit Cousson <bcousson@baylibre.com>
Fri, 11 Oct 2013 19:06:32 +0000 (21:06 +0200)
The On Chip Peripherals (OCP) device node is a simplified
representation of the AM33XX SoC interconnect. An OCP dev
node is already defined in the am33xx.dtsi Device Tree
source file included by am33xx based boards so there is
no need to redefine this on each board DT file.

Also, the OCP and IP modules directly connected to it are SoC
internal details that is better to keep outside of board files.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
arch/arm/boot/dts/am335x-bone-common.dtsi
arch/arm/boot/dts/am335x-evm.dts
arch/arm/boot/dts/am335x-evmsk.dts

index 29799ac3423ab91138c0144a91aac15b6cea9af9..ff5c3cafbdfff304d107ed7414a4137c14404da2 100644 (file)
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
-       ocp {
-               uart0: serial@44e09000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins>;
-
-                       status = "okay";
-               };
-
-               musb: usb@47400000 {
-                       status = "okay";
-
-                       control@44e10000 {
-                               status = "okay";
-                       };
-
-                       usb-phy@47401300 {
-                               status = "okay";
-                       };
-
-                       usb-phy@47401b00 {
-                               status = "okay";
-                       };
-
-                       usb@47401000 {
-                               status = "okay";
-                       };
-
-                       usb@47401800 {
-                               status = "okay";
-                               dr_mode = "host";
-                       };
-
-                       dma-controller@07402000  {
-                               status = "okay";
-                       };
-               };
-
-               i2c0: i2c@44e0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins>;
-
-                       status = "okay";
-                       clock-frequency = <400000>;
-
-                       tps: tps@24 {
-                               reg = <0x24>;
-                       };
-
-               };
-       };
-
        leds {
                pinctrl-names = "default";
                pinctrl-0 = <&user_leds_s0>;
        };
 };
 
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+
+       status = "okay";
+};
+
+&usb {
+       status = "okay";
+
+       control@44e10000 {
+               status = "okay";
+       };
+
+       usb-phy@47401300 {
+               status = "okay";
+       };
+
+       usb-phy@47401b00 {
+               status = "okay";
+       };
+
+       usb@47401000 {
+               status = "okay";
+       };
+
+       usb@47401800 {
+               status = "okay";
+               dr_mode = "host";
+       };
+
+       dma-controller@07402000  {
+               status = "okay";
+       };
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps: tps@24 {
+               reg = <0x24>;
+       };
+
+};
+
 /include/ "tps65217.dtsi"
 
 &tps {
index 1525cd6d4844e27ea69d041d8a9526cabedf138b..23b0a3e32f2ee7d56713442cabe531aec9494b17 100644 (file)
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
-       ocp {
-               uart0: serial@44e09000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins>;
-
-                       status = "okay";
-               };
-
-               i2c0: i2c@44e0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins>;
-
-                       status = "okay";
-                       clock-frequency = <400000>;
-
-                       tps: tps@2d {
-                               reg = <0x2d>;
-                       };
-               };
-
-               musb: usb@47400000 {
-                       status = "okay";
-
-                       control@44e10000 {
-                               status = "okay";
-                       };
-
-                       usb-phy@47401300 {
-                               status = "okay";
-                       };
-
-                       usb-phy@47401b00 {
-                               status = "okay";
-                       };
-
-                       usb@47401000 {
-                               status = "okay";
-                       };
-
-                       usb@47401800 {
-                               status = "okay";
-                               dr_mode = "host";
-                       };
-
-                       dma-controller@07402000  {
-                               status = "okay";
-                       };
-               };
-
-               i2c1: i2c@4802a000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c1_pins>;
-
-                       status = "okay";
-                       clock-frequency = <100000>;
-
-                       lis331dlh: lis331dlh@18 {
-                               compatible = "st,lis331dlh", "st,lis3lv02d";
-                               reg = <0x18>;
-                               Vdd-supply = <&lis3_reg>;
-                               Vdd_IO-supply = <&lis3_reg>;
-
-                               st,click-single-x;
-                               st,click-single-y;
-                               st,click-single-z;
-                               st,click-thresh-x = <10>;
-                               st,click-thresh-y = <10>;
-                               st,click-thresh-z = <10>;
-                               st,irq1-click;
-                               st,irq2-click;
-                               st,wakeup-x-lo;
-                               st,wakeup-x-hi;
-                               st,wakeup-y-lo;
-                               st,wakeup-y-hi;
-                               st,wakeup-z-lo;
-                               st,wakeup-z-hi;
-                               st,min-limit-x = <120>;
-                               st,min-limit-y = <120>;
-                               st,min-limit-z = <140>;
-                               st,max-limit-x = <550>;
-                               st,max-limit-y = <550>;
-                               st,max-limit-z = <750>;
-                       };
-
-                       tsl2550: tsl2550@39 {
-                               compatible = "taos,tsl2550";
-                               reg = <0x39>;
-                       };
-
-                       tmp275: tmp275@48 {
-                               compatible = "ti,tmp275";
-                               reg = <0x48>;
-                       };
-               };
-
-               elm: elm@48080000 {
-                       status = "okay";
-               };
-
-               epwmss0: epwmss@48300000 {
-                       status = "okay";
-
-                       ecap0: ecap@48300100 {
-                               status = "okay";
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&ecap0_pins>;
-                       };
-               };
-
-               gpmc: gpmc@50000000 {
-                       status = "okay";
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&nandflash_pins_s0>;
-                       ranges = <0 0 0x08000000 0x10000000>;   /* CS0: NAND */
-                       nand@0,0 {
-                               reg = <0 0 0>; /* CS0, offset 0 */
-                               nand-bus-width = <8>;
-                               ti,nand-ecc-opt = "bch8";
-                               gpmc,device-nand = "true";
-                               gpmc,device-width = <1>;
-                               gpmc,sync-clk-ps = <0>;
-                               gpmc,cs-on-ns = <0>;
-                               gpmc,cs-rd-off-ns = <44>;
-                               gpmc,cs-wr-off-ns = <44>;
-                               gpmc,adv-on-ns = <6>;
-                               gpmc,adv-rd-off-ns = <34>;
-                               gpmc,adv-wr-off-ns = <44>;
-                               gpmc,we-on-ns = <0>;
-                               gpmc,we-off-ns = <40>;
-                               gpmc,oe-on-ns = <0>;
-                               gpmc,oe-off-ns = <54>;
-                               gpmc,access-ns = <64>;
-                               gpmc,rd-cycle-ns = <82>;
-                               gpmc,wr-cycle-ns = <82>;
-                               gpmc,wait-on-read = "true";
-                               gpmc,wait-on-write = "true";
-                               gpmc,bus-turnaround-ns = <0>;
-                               gpmc,cycle2cycle-delay-ns = <0>;
-                               gpmc,clk-activation-ns = <0>;
-                               gpmc,wait-monitoring-ns = <0>;
-                               gpmc,wr-access-ns = <40>;
-                               gpmc,wr-data-mux-bus-ns = <0>;
-
-                               #address-cells = <1>;
-                               #size-cells = <1>;
-                               elm_id = <&elm>;
-
-                               /* MTD partition table */
-                               partition@0 {
-                                       label = "SPL1";
-                                       reg = <0x00000000 0x000020000>;
-                               };
-
-                               partition@1 {
-                                       label = "SPL2";
-                                       reg = <0x00020000 0x00020000>;
-                               };
-
-                               partition@2 {
-                                       label = "SPL3";
-                                       reg = <0x00040000 0x00020000>;
-                               };
-
-                               partition@3 {
-                                       label = "SPL4";
-                                       reg = <0x00060000 0x00020000>;
-                               };
-
-                               partition@4 {
-                                       label = "U-boot";
-                                       reg = <0x00080000 0x001e0000>;
-                               };
-
-                               partition@5 {
-                                       label = "environment";
-                                       reg = <0x00260000 0x00020000>;
-                               };
-
-                               partition@6 {
-                                       label = "Kernel";
-                                       reg = <0x00280000 0x00500000>;
-                               };
-
-                               partition@7 {
-                                       label = "File-System";
-                                       reg = <0x00780000 0x0F880000>;
-                               };
-                       };
-               };
-       };
-
        vbat: fixedregulator@0 {
                compatible = "regulator-fixed";
                regulator-name = "vbat";
        };
 };
 
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps: tps@2d {
+               reg = <0x2d>;
+       };
+};
+
+&usb {
+       status = "okay";
+
+       control@44e10000 {
+               status = "okay";
+       };
+
+       usb-phy@47401300 {
+               status = "okay";
+       };
+
+       usb-phy@47401b00 {
+               status = "okay";
+       };
+
+       usb@47401000 {
+               status = "okay";
+       };
+
+       usb@47401800 {
+               status = "okay";
+               dr_mode = "host";
+       };
+
+       dma-controller@07402000  {
+               status = "okay";
+       };
+};
+
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins>;
+
+       status = "okay";
+       clock-frequency = <100000>;
+
+       lis331dlh: lis331dlh@18 {
+               compatible = "st,lis331dlh", "st,lis3lv02d";
+               reg = <0x18>;
+               Vdd-supply = <&lis3_reg>;
+               Vdd_IO-supply = <&lis3_reg>;
+
+               st,click-single-x;
+               st,click-single-y;
+               st,click-single-z;
+               st,click-thresh-x = <10>;
+               st,click-thresh-y = <10>;
+               st,click-thresh-z = <10>;
+               st,irq1-click;
+               st,irq2-click;
+               st,wakeup-x-lo;
+               st,wakeup-x-hi;
+               st,wakeup-y-lo;
+               st,wakeup-y-hi;
+               st,wakeup-z-lo;
+               st,wakeup-z-hi;
+               st,min-limit-x = <120>;
+               st,min-limit-y = <120>;
+               st,min-limit-z = <140>;
+               st,max-limit-x = <550>;
+               st,max-limit-y = <550>;
+               st,max-limit-z = <750>;
+       };
+
+       tsl2550: tsl2550@39 {
+               compatible = "taos,tsl2550";
+               reg = <0x39>;
+       };
+
+       tmp275: tmp275@48 {
+               compatible = "ti,tmp275";
+               reg = <0x48>;
+       };
+};
+
+&elm {
+       status = "okay";
+};
+
+&epwmss0 {
+       status = "okay";
+
+       ecap0: ecap@48300100 {
+               status = "okay";
+               pinctrl-names = "default";
+               pinctrl-0 = <&ecap0_pins>;
+       };
+};
+
+&gpmc {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&nandflash_pins_s0>;
+       ranges = <0 0 0x08000000 0x10000000>;   /* CS0: NAND */
+       nand@0,0 {
+               reg = <0 0 0>; /* CS0, offset 0 */
+               nand-bus-width = <8>;
+               ti,nand-ecc-opt = "bch8";
+               gpmc,device-nand = "true";
+               gpmc,device-width = <1>;
+               gpmc,sync-clk-ps = <0>;
+               gpmc,cs-on-ns = <0>;
+               gpmc,cs-rd-off-ns = <44>;
+               gpmc,cs-wr-off-ns = <44>;
+               gpmc,adv-on-ns = <6>;
+               gpmc,adv-rd-off-ns = <34>;
+               gpmc,adv-wr-off-ns = <44>;
+               gpmc,we-on-ns = <0>;
+               gpmc,we-off-ns = <40>;
+               gpmc,oe-on-ns = <0>;
+               gpmc,oe-off-ns = <54>;
+               gpmc,access-ns = <64>;
+               gpmc,rd-cycle-ns = <82>;
+               gpmc,wr-cycle-ns = <82>;
+               gpmc,wait-on-read = "true";
+               gpmc,wait-on-write = "true";
+               gpmc,bus-turnaround-ns = <0>;
+               gpmc,cycle2cycle-delay-ns = <0>;
+               gpmc,clk-activation-ns = <0>;
+               gpmc,wait-monitoring-ns = <0>;
+               gpmc,wr-access-ns = <40>;
+               gpmc,wr-data-mux-bus-ns = <0>;
+
+               #address-cells = <1>;
+               #size-cells = <1>;
+               elm_id = <&elm>;
+
+               /* MTD partition table */
+               partition@0 {
+                       label = "SPL1";
+                       reg = <0x00000000 0x000020000>;
+               };
+
+               partition@1 {
+                       label = "SPL2";
+                       reg = <0x00020000 0x00020000>;
+               };
+
+               partition@2 {
+                       label = "SPL3";
+                       reg = <0x00040000 0x00020000>;
+               };
+
+               partition@3 {
+                       label = "SPL4";
+                       reg = <0x00060000 0x00020000>;
+               };
+
+               partition@4 {
+                       label = "U-boot";
+                       reg = <0x00080000 0x001e0000>;
+               };
+
+               partition@5 {
+                       label = "environment";
+                       reg = <0x00260000 0x00020000>;
+               };
+
+               partition@6 {
+                       label = "Kernel";
+                       reg = <0x00280000 0x00500000>;
+               };
+
+               partition@7 {
+                       label = "File-System";
+                       reg = <0x00780000 0x0F880000>;
+               };
+       };
+};
+
 #include "tps65910.dtsi"
 
 &tps {
index f0066fe5d739c630c11496765ee33e5d6aee8035..bc93895a6eca4232fb7f5047c5eb4dc1d0645733 100644 (file)
                reg = <0x80000000 0x10000000>; /* 256 MB */
        };
 
-       ocp {
-               uart0: serial@44e09000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins>;
-
-                       status = "okay";
-               };
-
-               i2c0: i2c@44e0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins>;
-
-                       status = "okay";
-                       clock-frequency = <400000>;
-
-                       tps: tps@2d {
-                               reg = <0x2d>;
-                       };
-
-                       lis331dlh: lis331dlh@18 {
-                               compatible = "st,lis331dlh", "st,lis3lv02d";
-                               reg = <0x18>;
-                               Vdd-supply = <&lis3_reg>;
-                               Vdd_IO-supply = <&lis3_reg>;
-
-                               st,click-single-x;
-                               st,click-single-y;
-                               st,click-single-z;
-                               st,click-thresh-x = <10>;
-                               st,click-thresh-y = <10>;
-                               st,click-thresh-z = <10>;
-                               st,irq1-click;
-                               st,irq2-click;
-                               st,wakeup-x-lo;
-                               st,wakeup-x-hi;
-                               st,wakeup-y-lo;
-                               st,wakeup-y-hi;
-                               st,wakeup-z-lo;
-                               st,wakeup-z-hi;
-                               st,min-limit-x = <120>;
-                               st,min-limit-y = <120>;
-                               st,min-limit-z = <140>;
-                               st,max-limit-x = <550>;
-                               st,max-limit-y = <550>;
-                               st,max-limit-z = <750>;
-                       };
-               };
-
-               musb: usb@47400000 {
-                       status = "okay";
-
-                       control@44e10000 {
-                               status = "okay";
-                       };
-
-                       usb-phy@47401300 {
-                               status = "okay";
-                       };
-
-                       usb@47401000 {
-                               status = "okay";
-                       };
-               };
-
-               epwmss2: epwmss@48304000 {
-                       status = "okay";
-
-                       ecap2: ecap@48304100 {
-                               status = "okay";
-                               pinctrl-names = "default";
-                               pinctrl-0 = <&ecap2_pins>;
-                       };
-               };
-       };
-
        vbat: fixedregulator@0 {
                compatible = "regulator-fixed";
                regulator-name = "vbat";
        };
 };
 
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins>;
+
+       status = "okay";
+       clock-frequency = <400000>;
+
+       tps: tps@2d {
+               reg = <0x2d>;
+       };
+
+       lis331dlh: lis331dlh@18 {
+               compatible = "st,lis331dlh", "st,lis3lv02d";
+               reg = <0x18>;
+               Vdd-supply = <&lis3_reg>;
+               Vdd_IO-supply = <&lis3_reg>;
+
+               st,click-single-x;
+               st,click-single-y;
+               st,click-single-z;
+               st,click-thresh-x = <10>;
+               st,click-thresh-y = <10>;
+               st,click-thresh-z = <10>;
+               st,irq1-click;
+               st,irq2-click;
+               st,wakeup-x-lo;
+               st,wakeup-x-hi;
+               st,wakeup-y-lo;
+               st,wakeup-y-hi;
+               st,wakeup-z-lo;
+               st,wakeup-z-hi;
+               st,min-limit-x = <120>;
+               st,min-limit-y = <120>;
+               st,min-limit-z = <140>;
+               st,max-limit-x = <550>;
+               st,max-limit-y = <550>;
+               st,max-limit-z = <750>;
+       };
+};
+
+&usb {
+       status = "okay";
+
+       control@44e10000 {
+               status = "okay";
+       };
+
+       usb-phy@47401300 {
+               status = "okay";
+       };
+
+       usb@47401000 {
+               status = "okay";
+       };
+};
+
+&epwmss2 {
+       status = "okay";
+
+       ecap2: ecap@48304100 {
+               status = "okay";
+               pinctrl-names = "default";
+               pinctrl-0 = <&ecap2_pins>;
+       };
+};
+
 #include "tps65910.dtsi"
 
 &tps {