arm64: dts: qcom: msm8996-oneplus: correct UFS pad supply

The Qualcomm UFS phy switched from dedicated driver to QMP phy driver.
Eventually the old driver was removed in commit 02dca8c981b5 ("phy:
qcom: remove ufs qmp phy driver").  The original driver and its binding
used vddp-ref-clk regulator supply, but the new one did not and left the
supply unused.

The Qualcomm UFS phy bindings were also migrated to newer ones and
dropped support for vddp-ref-clk regulator in commit dc5cb63592bd
("dt-bindings: phy: migrate QMP UFS PHY bindings to
qcom,sc8280xp-qmp-ufs-phy.yaml").

It turns out that this regulator, although with inaccurate name
vddp-ref-clk, is actually needed to provide supply for VDD_PX10 (or
similar, depending on the SoC) used by UFS controller.

Bring back handling of this supply by using more appropriate regulator -
UFS controller host supply.  This also fixes dtbs_check warning:

  msm8996-oneplus3t.dtb: phy@627000: 'vddp-ref-clk-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230905161920.252013-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
index ec5457508fe63b08448f40990468ef5bd3a81d8d..38035e0db80be9c4829b67233ba5c4ce8a2baa21 100644 (file)
--- a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
@@ -772,7 +772,6 @@
 &ufsphy {
        vdda-phy-supply = <&vreg_l28a_0p925>;
        vdda-pll-supply = <&vreg_l12a_1p8>;
-       vddp-ref-clk-supply = <&vreg_l25a_1p2>;
 
        status = "okay";
 };
@@ -781,6 +780,7 @@
        vcc-supply = <&vreg_l20a_2p95>;
        vccq-supply = <&vreg_l25a_1p2>;
        vccq2-supply = <&vreg_s4a_1p8>;
+       vdd-hba-supply = <&vreg_l25a_1p2>;
 
        vcc-max-microamp = <600000>;
        vccq-max-microamp = <450000>;