M: Carolyn Wyborny <carolyn.wyborny@intel.com>
M: Don Skidmore <donald.c.skidmore@intel.com>
M: Greg Rose <gregory.v.rose@intel.com>
-M: P
J Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M: P
eter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
M: Alex Duyck <alexander.h.duyck@intel.com>
M: John Ronciak <john.ronciak@intel.com>
L: e1000-devel@lists.sourceforge.net
W: http://e1000.sourceforge.net/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-2.6.git
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next.git
S: Supported
F: Documentation/networking/e100.txt
F: Documentation/networking/e1000.txt
F: Documentation/networking/ixgb.txt
F: Documentation/networking/ixgbe.txt
F: Documentation/networking/ixgbevf.txt
-F: drivers/net/e100.c
-F: drivers/net/e1000/
-F: drivers/net/e1000e/
-F: drivers/net/igb/
-F: drivers/net/igbvf/
-F: drivers/net/ixgb/
-F: drivers/net/ixgbe/
-F: drivers/net/ixgbevf/
+F: drivers/net/ethernet/intel/
INTEL MRST PMU DRIVER
M: Len Brown <len.brown@intel.com>
depends on NET_PCI && PCI && MIPS
select PHYLIB
-config E100
- tristate "Intel(R) PRO/100+ support"
- depends on NET_PCI && PCI
- select MII
- ---help---
- This driver supports Intel(R) PRO/100 family of adapters.
- To verify that your adapter is supported, find the board ID number
- on the adapter. Look for a label that has a barcode and a number
- in the format 123456-001 (six digits hyphen three digits).
-
- Use the above information and the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- to identify the adapter.
-
- For the latest Intel PRO/100 network driver for Linux, see:
-
- <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e100.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called e100.
-
config FEALNX
tristate "Myson MTD-8xx PCI Ethernet support"
depends on NET_PCI && PCI
To compile this driver as a module, choose M here: the
module will be called dl2k.
-config E1000
- tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) PRO/1000 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called e1000.
-
-config E1000E
- tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
- depends on PCI && (!SPARC32 || BROKEN)
- select CRC32
- ---help---
- This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
- ethernet family of adapters. For PCI or PCI-X e1000 adapters,
- use the regular e1000 driver For more information on how to
- identify your adapter, go to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- To compile this driver as a module, choose M here. The module
- will be called e1000e.
-
config IP1000
tristate "IP1000 Gigabit Ethernet support"
depends on PCI && EXPERIMENTAL
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config IGB
- tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82575/82576 gigabit ethernet family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called igb.
-
-config IGB_DCA
- bool "Direct Cache Access (DCA) Support"
- default y
- depends on IGB && DCA && !(IGB=y && DCA=m)
- ---help---
- Say Y here if you want to use Direct Cache Access (DCA) in the
- driver. DCA is a method for warming the CPU cache before data
- is used, with the intent of lessening the impact of cache misses.
-
-config IGBVF
- tristate "Intel(R) 82576 Virtual Function Ethernet support"
- depends on PCI
- ---help---
- This driver supports Intel(R) 82576 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/e1000.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called igbvf.
-
source "drivers/net/ixp2000/Kconfig"
config NS83820
help
This enables the support for the Cisco VIC Ethernet card.
-config IXGBE
- tristate "Intel(R) 10GbE PCI Express adapters support"
- depends on PCI && INET
- select MDIO
- ---help---
- This driver supports Intel(R) 10GbE PCI Express family of
- adapters. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- To compile this driver as a module, choose M here. The module
- will be called ixgbe.
-
-config IXGBE_DCA
- bool "Direct Cache Access (DCA) Support"
- default y
- depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
- ---help---
- Say Y here if you want to use Direct Cache Access (DCA) in the
- driver. DCA is a method for warming the CPU cache before data
- is used, with the intent of lessening the impact of cache misses.
-
-config IXGBE_DCB
- bool "Data Center Bridging (DCB) Support"
- default n
- depends on IXGBE && DCB
- ---help---
- Say Y here if you want to use Data Center Bridging (DCB) in the
- driver.
-
- If unsure, say N.
-
-config IXGBEVF
- tristate "Intel(R) 82599 Virtual Function Ethernet support"
- depends on PCI_MSI
- ---help---
- This driver supports Intel(R) 82599 virtual functions. For more
- information on how to identify your adapter, go to the Adapter &
- Driver ID Guide at:
-
- <http://support.intel.com/support/network/sb/CS-008441.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/ixgbevf.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called ixgbevf. MSI-X interrupt support is required
- for this driver to work correctly.
-
-config IXGB
- tristate "Intel(R) PRO/10GbE support"
- depends on PCI
- ---help---
- This driver supports Intel(R) PRO/10GbE family of adapters for
- PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
- instead. For more information on how to identify your adapter, go
- to the Adapter & Driver ID Guide at:
-
- <http://support.intel.com/support/network/adapter/pro100/21397.htm>
-
- For general information and support, go to the Intel support
- website at:
-
- <http://support.intel.com>
-
- More specific information on configuring the driver is in
- <file:Documentation/networking/ixgb.txt>.
-
- To compile this driver as a module, choose M here. The module
- will be called ixgb.
-
config S2IO
tristate "Exar Xframe 10Gb Ethernet Adapter"
depends on PCI
obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-obj-$(CONFIG_E1000) += e1000/
-obj-$(CONFIG_E1000E) += e1000e/
obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
-obj-$(CONFIG_IGB) += igb/
-obj-$(CONFIG_IGBVF) += igbvf/
-obj-$(CONFIG_IXGBE) += ixgbe/
-obj-$(CONFIG_IXGBEVF) += ixgbevf/
-obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_E100) += e100.o
obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_EPIC100) += epic100.o
obj-$(CONFIG_SMSC9420) += smsc9420.o
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/100 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/*
- * e100.c: Intel(R) PRO/100 ethernet driver
- *
- * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
- * original e100 driver, but better described as a munging of
- * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
- *
- * References:
- * Intel 8255x 10/100 Mbps Ethernet Controller Family,
- * Open Source Software Developers Manual,
- * http://sourceforge.net/projects/e1000
- *
- *
- * Theory of Operation
- *
- * I. General
- *
- * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
- * controller family, which includes the 82557, 82558, 82559, 82550,
- * 82551, and 82562 devices. 82558 and greater controllers
- * integrate the Intel 82555 PHY. The controllers are used in
- * server and client network interface cards, as well as in
- * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
- * configurations. 8255x supports a 32-bit linear addressing
- * mode and operates at 33Mhz PCI clock rate.
- *
- * II. Driver Operation
- *
- * Memory-mapped mode is used exclusively to access the device's
- * shared-memory structure, the Control/Status Registers (CSR). All
- * setup, configuration, and control of the device, including queuing
- * of Tx, Rx, and configuration commands is through the CSR.
- * cmd_lock serializes accesses to the CSR command register. cb_lock
- * protects the shared Command Block List (CBL).
- *
- * 8255x is highly MII-compliant and all access to the PHY go
- * through the Management Data Interface (MDI). Consequently, the
- * driver leverages the mii.c library shared with other MII-compliant
- * devices.
- *
- * Big- and Little-Endian byte order as well as 32- and 64-bit
- * archs are supported. Weak-ordered memory and non-cache-coherent
- * archs are supported.
- *
- * III. Transmit
- *
- * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
- * together in a fixed-size ring (CBL) thus forming the flexible mode
- * memory structure. A TCB marked with the suspend-bit indicates
- * the end of the ring. The last TCB processed suspends the
- * controller, and the controller can be restarted by issue a CU
- * resume command to continue from the suspend point, or a CU start
- * command to start at a given position in the ring.
- *
- * Non-Tx commands (config, multicast setup, etc) are linked
- * into the CBL ring along with Tx commands. The common structure
- * used for both Tx and non-Tx commands is the Command Block (CB).
- *
- * cb_to_use is the next CB to use for queuing a command; cb_to_clean
- * is the next CB to check for completion; cb_to_send is the first
- * CB to start on in case of a previous failure to resume. CB clean
- * up happens in interrupt context in response to a CU interrupt.
- * cbs_avail keeps track of number of free CB resources available.
- *
- * Hardware padding of short packets to minimum packet size is
- * enabled. 82557 pads with 7Eh, while the later controllers pad
- * with 00h.
- *
- * IV. Receive
- *
- * The Receive Frame Area (RFA) comprises a ring of Receive Frame
- * Descriptors (RFD) + data buffer, thus forming the simplified mode
- * memory structure. Rx skbs are allocated to contain both the RFD
- * and the data buffer, but the RFD is pulled off before the skb is
- * indicated. The data buffer is aligned such that encapsulated
- * protocol headers are u32-aligned. Since the RFD is part of the
- * mapped shared memory, and completion status is contained within
- * the RFD, the RFD must be dma_sync'ed to maintain a consistent
- * view from software and hardware.
- *
- * In order to keep updates to the RFD link field from colliding with
- * hardware writes to mark packets complete, we use the feature that
- * hardware will not write to a size 0 descriptor and mark the previous
- * packet as end-of-list (EL). After updating the link, we remove EL
- * and only then restore the size such that hardware may use the
- * previous-to-end RFD.
- *
- * Under typical operation, the receive unit (RU) is start once,
- * and the controller happily fills RFDs as frames arrive. If
- * replacement RFDs cannot be allocated, or the RU goes non-active,
- * the RU must be restarted. Frame arrival generates an interrupt,
- * and Rx indication and re-allocation happen in the same context,
- * therefore no locking is required. A software-generated interrupt
- * is generated from the watchdog to recover from a failed allocation
- * scenario where all Rx resources have been indicated and none re-
- * placed.
- *
- * V. Miscellaneous
- *
- * VLAN offloading of tagging, stripping and filtering is not
- * supported, but driver will accommodate the extra 4-byte VLAN tag
- * for processing by upper layers. Tx/Rx Checksum offloading is not
- * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
- * not supported (hardware limitation).
- *
- * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
- *
- * Thanks to JC (jchapman@katalix.com) for helping with
- * testing/troubleshooting the development driver.
- *
- * TODO:
- * o several entry points race with dev->close
- * o check for tx-no-resources/stop Q races with tx clean/wake Q
- *
- * FIXES:
- * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
- * - Stratus87247: protect MDI control register manipulations
- * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
- * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/hardirq.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/mii.h>
-#include <linux/if_vlan.h>
-#include <linux/skbuff.h>
-#include <linux/ethtool.h>
-#include <linux/string.h>
-#include <linux/firmware.h>
-#include <linux/rtnetlink.h>
-#include <asm/unaligned.h>
-
-
-#define DRV_NAME "e100"
-#define DRV_EXT "-NAPI"
-#define DRV_VERSION "3.5.24-k2"DRV_EXT
-#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
-#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
-
-#define E100_WATCHDOG_PERIOD (2 * HZ)
-#define E100_NAPI_WEIGHT 16
-
-#define FIRMWARE_D101M "e100/d101m_ucode.bin"
-#define FIRMWARE_D101S "e100/d101s_ucode.bin"
-#define FIRMWARE_D102E "e100/d102e_ucode.bin"
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_AUTHOR(DRV_COPYRIGHT);
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-MODULE_FIRMWARE(FIRMWARE_D101M);
-MODULE_FIRMWARE(FIRMWARE_D101S);
-MODULE_FIRMWARE(FIRMWARE_D102E);
-
-static int debug = 3;
-static int eeprom_bad_csum_allow = 0;
-static int use_io = 0;
-module_param(debug, int, 0);
-module_param(eeprom_bad_csum_allow, int, 0);
-module_param(use_io, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
-MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
-
-#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
- PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
- PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
-static DEFINE_PCI_DEVICE_TABLE(e100_id_table) = {
- INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
- INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
- INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
- INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
- INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
- INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
- INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
- INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
- INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
- INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
- INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
- INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7),
- INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
- INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
- INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
- INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
- INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
- INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, e100_id_table);
-
-enum mac {
- mac_82557_D100_A = 0,
- mac_82557_D100_B = 1,
- mac_82557_D100_C = 2,
- mac_82558_D101_A4 = 4,
- mac_82558_D101_B0 = 5,
- mac_82559_D101M = 8,
- mac_82559_D101S = 9,
- mac_82550_D102 = 12,
- mac_82550_D102_C = 13,
- mac_82551_E = 14,
- mac_82551_F = 15,
- mac_82551_10 = 16,
- mac_unknown = 0xFF,
-};
-
-enum phy {
- phy_100a = 0x000003E0,
- phy_100c = 0x035002A8,
- phy_82555_tx = 0x015002A8,
- phy_nsc_tx = 0x5C002000,
- phy_82562_et = 0x033002A8,
- phy_82562_em = 0x032002A8,
- phy_82562_ek = 0x031002A8,
- phy_82562_eh = 0x017002A8,
- phy_82552_v = 0xd061004d,
- phy_unknown = 0xFFFFFFFF,
-};
-
-/* CSR (Control/Status Registers) */
-struct csr {
- struct {
- u8 status;
- u8 stat_ack;
- u8 cmd_lo;
- u8 cmd_hi;
- u32 gen_ptr;
- } scb;
- u32 port;
- u16 flash_ctrl;
- u8 eeprom_ctrl_lo;
- u8 eeprom_ctrl_hi;
- u32 mdi_ctrl;
- u32 rx_dma_count;
-};
-
-enum scb_status {
- rus_no_res = 0x08,
- rus_ready = 0x10,
- rus_mask = 0x3C,
-};
-
-enum ru_state {
- RU_SUSPENDED = 0,
- RU_RUNNING = 1,
- RU_UNINITIALIZED = -1,
-};
-
-enum scb_stat_ack {
- stat_ack_not_ours = 0x00,
- stat_ack_sw_gen = 0x04,
- stat_ack_rnr = 0x10,
- stat_ack_cu_idle = 0x20,
- stat_ack_frame_rx = 0x40,
- stat_ack_cu_cmd_done = 0x80,
- stat_ack_not_present = 0xFF,
- stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
- stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
-};
-
-enum scb_cmd_hi {
- irq_mask_none = 0x00,
- irq_mask_all = 0x01,
- irq_sw_gen = 0x02,
-};
-
-enum scb_cmd_lo {
- cuc_nop = 0x00,
- ruc_start = 0x01,
- ruc_load_base = 0x06,
- cuc_start = 0x10,
- cuc_resume = 0x20,
- cuc_dump_addr = 0x40,
- cuc_dump_stats = 0x50,
- cuc_load_base = 0x60,
- cuc_dump_reset = 0x70,
-};
-
-enum cuc_dump {
- cuc_dump_complete = 0x0000A005,
- cuc_dump_reset_complete = 0x0000A007,
-};
-
-enum port {
- software_reset = 0x0000,
- selftest = 0x0001,
- selective_reset = 0x0002,
-};
-
-enum eeprom_ctrl_lo {
- eesk = 0x01,
- eecs = 0x02,
- eedi = 0x04,
- eedo = 0x08,
-};
-
-enum mdi_ctrl {
- mdi_write = 0x04000000,
- mdi_read = 0x08000000,
- mdi_ready = 0x10000000,
-};
-
-enum eeprom_op {
- op_write = 0x05,
- op_read = 0x06,
- op_ewds = 0x10,
- op_ewen = 0x13,
-};
-
-enum eeprom_offsets {
- eeprom_cnfg_mdix = 0x03,
- eeprom_phy_iface = 0x06,
- eeprom_id = 0x0A,
- eeprom_config_asf = 0x0D,
- eeprom_smbus_addr = 0x90,
-};
-
-enum eeprom_cnfg_mdix {
- eeprom_mdix_enabled = 0x0080,
-};
-
-enum eeprom_phy_iface {
- NoSuchPhy = 0,
- I82553AB,
- I82553C,
- I82503,
- DP83840,
- S80C240,
- S80C24,
- I82555,
- DP83840A = 10,
-};
-
-enum eeprom_id {
- eeprom_id_wol = 0x0020,
-};
-
-enum eeprom_config_asf {
- eeprom_asf = 0x8000,
- eeprom_gcl = 0x4000,
-};
-
-enum cb_status {
- cb_complete = 0x8000,
- cb_ok = 0x2000,
-};
-
-enum cb_command {
- cb_nop = 0x0000,
- cb_iaaddr = 0x0001,
- cb_config = 0x0002,
- cb_multi = 0x0003,
- cb_tx = 0x0004,
- cb_ucode = 0x0005,
- cb_dump = 0x0006,
- cb_tx_sf = 0x0008,
- cb_cid = 0x1f00,
- cb_i = 0x2000,
- cb_s = 0x4000,
- cb_el = 0x8000,
-};
-
-struct rfd {
- __le16 status;
- __le16 command;
- __le32 link;
- __le32 rbd;
- __le16 actual_size;
- __le16 size;
-};
-
-struct rx {
- struct rx *next, *prev;
- struct sk_buff *skb;
- dma_addr_t dma_addr;
-};
-
-#if defined(__BIG_ENDIAN_BITFIELD)
-#define X(a,b) b,a
-#else
-#define X(a,b) a,b
-#endif
-struct config {
-/*0*/ u8 X(byte_count:6, pad0:2);
-/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
-/*2*/ u8 adaptive_ifs;
-/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
- term_write_cache_line:1), pad3:4);
-/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
-/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
-/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
- tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
- rx_discard_overruns:1), rx_save_bad_frames:1);
-/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
- pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
- tx_dynamic_tbd:1);
-/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
-/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
- link_status_wake:1), arp_wake:1), mcmatch_wake:1);
-/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
- loopback:2);
-/*11*/ u8 X(linear_priority:3, pad11:5);
-/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
-/*13*/ u8 ip_addr_lo;
-/*14*/ u8 ip_addr_hi;
-/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
- wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
- pad15_2:1), crs_or_cdt:1);
-/*16*/ u8 fc_delay_lo;
-/*17*/ u8 fc_delay_hi;
-/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
- rx_long_ok:1), fc_priority_threshold:3), pad18:1);
-/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
- fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
- full_duplex_force:1), full_duplex_pin:1);
-/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
-/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
-/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
- u8 pad_d102[9];
-};
-
-#define E100_MAX_MULTICAST_ADDRS 64
-struct multi {
- __le16 count;
- u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
-};
-
-/* Important: keep total struct u32-aligned */
-#define UCODE_SIZE 134
-struct cb {
- __le16 status;
- __le16 command;
- __le32 link;
- union {
- u8 iaaddr[ETH_ALEN];
- __le32 ucode[UCODE_SIZE];
- struct config config;
- struct multi multi;
- struct {
- u32 tbd_array;
- u16 tcb_byte_count;
- u8 threshold;
- u8 tbd_count;
- struct {
- __le32 buf_addr;
- __le16 size;
- u16 eol;
- } tbd;
- } tcb;
- __le32 dump_buffer_addr;
- } u;
- struct cb *next, *prev;
- dma_addr_t dma_addr;
- struct sk_buff *skb;
-};
-
-enum loopback {
- lb_none = 0, lb_mac = 1, lb_phy = 3,
-};
-
-struct stats {
- __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
- tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
- tx_multiple_collisions, tx_total_collisions;
- __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
- rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
- rx_short_frame_errors;
- __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
- __le16 xmt_tco_frames, rcv_tco_frames;
- __le32 complete;
-};
-
-struct mem {
- struct {
- u32 signature;
- u32 result;
- } selftest;
- struct stats stats;
- u8 dump_buf[596];
-};
-
-struct param_range {
- u32 min;
- u32 max;
- u32 count;
-};
-
-struct params {
- struct param_range rfds;
- struct param_range cbs;
-};
-
-struct nic {
- /* Begin: frequently used values: keep adjacent for cache effect */
- u32 msg_enable ____cacheline_aligned;
- struct net_device *netdev;
- struct pci_dev *pdev;
- u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
-
- struct rx *rxs ____cacheline_aligned;
- struct rx *rx_to_use;
- struct rx *rx_to_clean;
- struct rfd blank_rfd;
- enum ru_state ru_running;
-
- spinlock_t cb_lock ____cacheline_aligned;
- spinlock_t cmd_lock;
- struct csr __iomem *csr;
- enum scb_cmd_lo cuc_cmd;
- unsigned int cbs_avail;
- struct napi_struct napi;
- struct cb *cbs;
- struct cb *cb_to_use;
- struct cb *cb_to_send;
- struct cb *cb_to_clean;
- __le16 tx_command;
- /* End: frequently used values: keep adjacent for cache effect */
-
- enum {
- ich = (1 << 0),
- promiscuous = (1 << 1),
- multicast_all = (1 << 2),
- wol_magic = (1 << 3),
- ich_10h_workaround = (1 << 4),
- } flags ____cacheline_aligned;
-
- enum mac mac;
- enum phy phy;
- struct params params;
- struct timer_list watchdog;
- struct mii_if_info mii;
- struct work_struct tx_timeout_task;
- enum loopback loopback;
-
- struct mem *mem;
- dma_addr_t dma_addr;
-
- struct pci_pool *cbs_pool;
- dma_addr_t cbs_dma_addr;
- u8 adaptive_ifs;
- u8 tx_threshold;
- u32 tx_frames;
- u32 tx_collisions;
- u32 tx_deferred;
- u32 tx_single_collisions;
- u32 tx_multiple_collisions;
- u32 tx_fc_pause;
- u32 tx_tco_frames;
-
- u32 rx_fc_pause;
- u32 rx_fc_unsupported;
- u32 rx_tco_frames;
- u32 rx_over_length_errors;
-
- u16 eeprom_wc;
- __le16 eeprom[256];
- spinlock_t mdio_lock;
- const struct firmware *fw;
-};
-
-static inline void e100_write_flush(struct nic *nic)
-{
- /* Flush previous PCI writes through intermediate bridges
- * by doing a benign read */
- (void)ioread8(&nic->csr->scb.status);
-}
-
-static void e100_enable_irq(struct nic *nic)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&nic->cmd_lock, flags);
- iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
- e100_write_flush(nic);
- spin_unlock_irqrestore(&nic->cmd_lock, flags);
-}
-
-static void e100_disable_irq(struct nic *nic)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&nic->cmd_lock, flags);
- iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
- e100_write_flush(nic);
- spin_unlock_irqrestore(&nic->cmd_lock, flags);
-}
-
-static void e100_hw_reset(struct nic *nic)
-{
- /* Put CU and RU into idle with a selective reset to get
- * device off of PCI bus */
- iowrite32(selective_reset, &nic->csr->port);
- e100_write_flush(nic); udelay(20);
-
- /* Now fully reset device */
- iowrite32(software_reset, &nic->csr->port);
- e100_write_flush(nic); udelay(20);
-
- /* Mask off our interrupt line - it's unmasked after reset */
- e100_disable_irq(nic);
-}
-
-static int e100_self_test(struct nic *nic)
-{
- u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
-
- /* Passing the self-test is a pretty good indication
- * that the device can DMA to/from host memory */
-
- nic->mem->selftest.signature = 0;
- nic->mem->selftest.result = 0xFFFFFFFF;
-
- iowrite32(selftest | dma_addr, &nic->csr->port);
- e100_write_flush(nic);
- /* Wait 10 msec for self-test to complete */
- msleep(10);
-
- /* Interrupts are enabled after self-test */
- e100_disable_irq(nic);
-
- /* Check results of self-test */
- if (nic->mem->selftest.result != 0) {
- netif_err(nic, hw, nic->netdev,
- "Self-test failed: result=0x%08X\n",
- nic->mem->selftest.result);
- return -ETIMEDOUT;
- }
- if (nic->mem->selftest.signature == 0) {
- netif_err(nic, hw, nic->netdev, "Self-test failed: timed out\n");
- return -ETIMEDOUT;
- }
-
- return 0;
-}
-
-static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
-{
- u32 cmd_addr_data[3];
- u8 ctrl;
- int i, j;
-
- /* Three cmds: write/erase enable, write data, write/erase disable */
- cmd_addr_data[0] = op_ewen << (addr_len - 2);
- cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
- le16_to_cpu(data);
- cmd_addr_data[2] = op_ewds << (addr_len - 2);
-
- /* Bit-bang cmds to write word to eeprom */
- for (j = 0; j < 3; j++) {
-
- /* Chip select */
- iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- for (i = 31; i >= 0; i--) {
- ctrl = (cmd_addr_data[j] & (1 << i)) ?
- eecs | eedi : eecs;
- iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
- }
- /* Wait 10 msec for cmd to complete */
- msleep(10);
-
- /* Chip deselect */
- iowrite8(0, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
- }
-};
-
-/* General technique stolen from the eepro100 driver - very clever */
-static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
-{
- u32 cmd_addr_data;
- u16 data = 0;
- u8 ctrl;
- int i;
-
- cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
-
- /* Chip select */
- iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- /* Bit-bang to read word from eeprom */
- for (i = 31; i >= 0; i--) {
- ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
- iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- /* Eeprom drives a dummy zero to EEDO after receiving
- * complete address. Use this to adjust addr_len. */
- ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
- if (!(ctrl & eedo) && i > 16) {
- *addr_len -= (i - 16);
- i = 17;
- }
-
- data = (data << 1) | (ctrl & eedo ? 1 : 0);
- }
-
- /* Chip deselect */
- iowrite8(0, &nic->csr->eeprom_ctrl_lo);
- e100_write_flush(nic); udelay(4);
-
- return cpu_to_le16(data);
-};
-
-/* Load entire EEPROM image into driver cache and validate checksum */
-static int e100_eeprom_load(struct nic *nic)
-{
- u16 addr, addr_len = 8, checksum = 0;
-
- /* Try reading with an 8-bit addr len to discover actual addr len */
- e100_eeprom_read(nic, &addr_len, 0);
- nic->eeprom_wc = 1 << addr_len;
-
- for (addr = 0; addr < nic->eeprom_wc; addr++) {
- nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
- if (addr < nic->eeprom_wc - 1)
- checksum += le16_to_cpu(nic->eeprom[addr]);
- }
-
- /* The checksum, stored in the last word, is calculated such that
- * the sum of words should be 0xBABA */
- if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
- netif_err(nic, probe, nic->netdev, "EEPROM corrupted\n");
- if (!eeprom_bad_csum_allow)
- return -EAGAIN;
- }
-
- return 0;
-}
-
-/* Save (portion of) driver EEPROM cache to device and update checksum */
-static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
-{
- u16 addr, addr_len = 8, checksum = 0;
-
- /* Try reading with an 8-bit addr len to discover actual addr len */
- e100_eeprom_read(nic, &addr_len, 0);
- nic->eeprom_wc = 1 << addr_len;
-
- if (start + count >= nic->eeprom_wc)
- return -EINVAL;
-
- for (addr = start; addr < start + count; addr++)
- e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
-
- /* The checksum, stored in the last word, is calculated such that
- * the sum of words should be 0xBABA */
- for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
- checksum += le16_to_cpu(nic->eeprom[addr]);
- nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
- e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
- nic->eeprom[nic->eeprom_wc - 1]);
-
- return 0;
-}
-
-#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
-#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
-static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
-{
- unsigned long flags;
- unsigned int i;
- int err = 0;
-
- spin_lock_irqsave(&nic->cmd_lock, flags);
-
- /* Previous command is accepted when SCB clears */
- for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
- if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
- break;
- cpu_relax();
- if (unlikely(i > E100_WAIT_SCB_FAST))
- udelay(5);
- }
- if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
- err = -EAGAIN;
- goto err_unlock;
- }
-
- if (unlikely(cmd != cuc_resume))
- iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
- iowrite8(cmd, &nic->csr->scb.cmd_lo);
-
-err_unlock:
- spin_unlock_irqrestore(&nic->cmd_lock, flags);
-
- return err;
-}
-
-static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
- void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
-{
- struct cb *cb;
- unsigned long flags;
- int err = 0;
-
- spin_lock_irqsave(&nic->cb_lock, flags);
-
- if (unlikely(!nic->cbs_avail)) {
- err = -ENOMEM;
- goto err_unlock;
- }
-
- cb = nic->cb_to_use;
- nic->cb_to_use = cb->next;
- nic->cbs_avail--;
- cb->skb = skb;
-
- if (unlikely(!nic->cbs_avail))
- err = -ENOSPC;
-
- cb_prepare(nic, cb, skb);
-
- /* Order is important otherwise we'll be in a race with h/w:
- * set S-bit in current first, then clear S-bit in previous. */
- cb->command |= cpu_to_le16(cb_s);
- wmb();
- cb->prev->command &= cpu_to_le16(~cb_s);
-
- while (nic->cb_to_send != nic->cb_to_use) {
- if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
- nic->cb_to_send->dma_addr))) {
- /* Ok, here's where things get sticky. It's
- * possible that we can't schedule the command
- * because the controller is too busy, so
- * let's just queue the command and try again
- * when another command is scheduled. */
- if (err == -ENOSPC) {
- //request a reset
- schedule_work(&nic->tx_timeout_task);
- }
- break;
- } else {
- nic->cuc_cmd = cuc_resume;
- nic->cb_to_send = nic->cb_to_send->next;
- }
- }
-
-err_unlock:
- spin_unlock_irqrestore(&nic->cb_lock, flags);
-
- return err;
-}
-
-static int mdio_read(struct net_device *netdev, int addr, int reg)
-{
- struct nic *nic = netdev_priv(netdev);
- return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
-}
-
-static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
-{
- struct nic *nic = netdev_priv(netdev);
-
- nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
-}
-
-/* the standard mdio_ctrl() function for usual MII-compliant hardware */
-static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
-{
- u32 data_out = 0;
- unsigned int i;
- unsigned long flags;
-
-
- /*
- * Stratus87247: we shouldn't be writing the MDI control
- * register until the Ready bit shows True. Also, since
- * manipulation of the MDI control registers is a multi-step
- * procedure it should be done under lock.
- */
- spin_lock_irqsave(&nic->mdio_lock, flags);
- for (i = 100; i; --i) {
- if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
- break;
- udelay(20);
- }
- if (unlikely(!i)) {
- netdev_err(nic->netdev, "e100.mdio_ctrl won't go Ready\n");
- spin_unlock_irqrestore(&nic->mdio_lock, flags);
- return 0; /* No way to indicate timeout error */
- }
- iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
-
- for (i = 0; i < 100; i++) {
- udelay(20);
- if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
- break;
- }
- spin_unlock_irqrestore(&nic->mdio_lock, flags);
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
- dir == mdi_read ? "READ" : "WRITE",
- addr, reg, data, data_out);
- return (u16)data_out;
-}
-
-/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
-static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
- u32 addr,
- u32 dir,
- u32 reg,
- u16 data)
-{
- if ((reg == MII_BMCR) && (dir == mdi_write)) {
- if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
- u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
- MII_ADVERTISE);
-
- /*
- * Workaround Si issue where sometimes the part will not
- * autoneg to 100Mbps even when advertised.
- */
- if (advert & ADVERTISE_100FULL)
- data |= BMCR_SPEED100 | BMCR_FULLDPLX;
- else if (advert & ADVERTISE_100HALF)
- data |= BMCR_SPEED100;
- }
- }
- return mdio_ctrl_hw(nic, addr, dir, reg, data);
-}
-
-/* Fully software-emulated mdio_ctrl() function for cards without
- * MII-compliant PHYs.
- * For now, this is mainly geared towards 80c24 support; in case of further
- * requirements for other types (i82503, ...?) either extend this mechanism
- * or split it, whichever is cleaner.
- */
-static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
- u32 addr,
- u32 dir,
- u32 reg,
- u16 data)
-{
- /* might need to allocate a netdev_priv'ed register array eventually
- * to be able to record state changes, but for now
- * some fully hardcoded register handling ought to be ok I guess. */
-
- if (dir == mdi_read) {
- switch (reg) {
- case MII_BMCR:
- /* Auto-negotiation, right? */
- return BMCR_ANENABLE |
- BMCR_FULLDPLX;
- case MII_BMSR:
- return BMSR_LSTATUS /* for mii_link_ok() */ |
- BMSR_ANEGCAPABLE |
- BMSR_10FULL;
- case MII_ADVERTISE:
- /* 80c24 is a "combo card" PHY, right? */
- return ADVERTISE_10HALF |
- ADVERTISE_10FULL;
- default:
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
- dir == mdi_read ? "READ" : "WRITE",
- addr, reg, data);
- return 0xFFFF;
- }
- } else {
- switch (reg) {
- default:
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
- dir == mdi_read ? "READ" : "WRITE",
- addr, reg, data);
- return 0xFFFF;
- }
- }
-}
-static inline int e100_phy_supports_mii(struct nic *nic)
-{
- /* for now, just check it by comparing whether we
- are using MII software emulation.
- */
- return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
-}
-
-static void e100_get_defaults(struct nic *nic)
-{
- struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
- struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
-
- /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
- nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
- if (nic->mac == mac_unknown)
- nic->mac = mac_82557_D100_A;
-
- nic->params.rfds = rfds;
- nic->params.cbs = cbs;
-
- /* Quadwords to DMA into FIFO before starting frame transmit */
- nic->tx_threshold = 0xE0;
-
- /* no interrupt for every tx completion, delay = 256us if not 557 */
- nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
- ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
-
- /* Template for a freshly allocated RFD */
- nic->blank_rfd.command = 0;
- nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
- nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
-
- /* MII setup */
- nic->mii.phy_id_mask = 0x1F;
- nic->mii.reg_num_mask = 0x1F;
- nic->mii.dev = nic->netdev;
- nic->mii.mdio_read = mdio_read;
- nic->mii.mdio_write = mdio_write;
-}
-
-static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
-{
- struct config *config = &cb->u.config;
- u8 *c = (u8 *)config;
-
- cb->command = cpu_to_le16(cb_config);
-
- memset(config, 0, sizeof(struct config));
-
- config->byte_count = 0x16; /* bytes in this struct */
- config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
- config->direct_rx_dma = 0x1; /* reserved */
- config->standard_tcb = 0x1; /* 1=standard, 0=extended */
- config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
- config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
- config->tx_underrun_retry = 0x3; /* # of underrun retries */
- if (e100_phy_supports_mii(nic))
- config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
- config->pad10 = 0x6;
- config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
- config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
- config->ifs = 0x6; /* x16 = inter frame spacing */
- config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
- config->pad15_1 = 0x1;
- config->pad15_2 = 0x1;
- config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
- config->fc_delay_hi = 0x40; /* time delay for fc frame */
- config->tx_padding = 0x1; /* 1=pad short frames */
- config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
- config->pad18 = 0x1;
- config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
- config->pad20_1 = 0x1F;
- config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
- config->pad21_1 = 0x5;
-
- config->adaptive_ifs = nic->adaptive_ifs;
- config->loopback = nic->loopback;
-
- if (nic->mii.force_media && nic->mii.full_duplex)
- config->full_duplex_force = 0x1; /* 1=force, 0=auto */
-
- if (nic->flags & promiscuous || nic->loopback) {
- config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
- config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
- config->promiscuous_mode = 0x1; /* 1=on, 0=off */
- }
-
- if (nic->flags & multicast_all)
- config->multicast_all = 0x1; /* 1=accept, 0=no */
-
- /* disable WoL when up */
- if (netif_running(nic->netdev) || !(nic->flags & wol_magic))
- config->magic_packet_disable = 0x1; /* 1=off, 0=on */
-
- if (nic->mac >= mac_82558_D101_A4) {
- config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
- config->mwi_enable = 0x1; /* 1=enable, 0=disable */
- config->standard_tcb = 0x0; /* 1=standard, 0=extended */
- config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
- if (nic->mac >= mac_82559_D101M) {
- config->tno_intr = 0x1; /* TCO stats enable */
- /* Enable TCO in extended config */
- if (nic->mac >= mac_82551_10) {
- config->byte_count = 0x20; /* extended bytes */
- config->rx_d102_mode = 0x1; /* GMRC for TCO */
- }
- } else {
- config->standard_stat_counter = 0x0;
- }
- }
-
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
- c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
-}
-
-/*************************************************************************
-* CPUSaver parameters
-*
-* All CPUSaver parameters are 16-bit literals that are part of a
-* "move immediate value" instruction. By changing the value of
-* the literal in the instruction before the code is loaded, the
-* driver can change the algorithm.
-*
-* INTDELAY - This loads the dead-man timer with its initial value.
-* When this timer expires the interrupt is asserted, and the
-* timer is reset each time a new packet is received. (see
-* BUNDLEMAX below to set the limit on number of chained packets)
-* The current default is 0x600 or 1536. Experiments show that
-* the value should probably stay within the 0x200 - 0x1000.
-*
-* BUNDLEMAX -
-* This sets the maximum number of frames that will be bundled. In
-* some situations, such as the TCP windowing algorithm, it may be
-* better to limit the growth of the bundle size than let it go as
-* high as it can, because that could cause too much added latency.
-* The default is six, because this is the number of packets in the
-* default TCP window size. A value of 1 would make CPUSaver indicate
-* an interrupt for every frame received. If you do not want to put
-* a limit on the bundle size, set this value to xFFFF.
-*
-* BUNDLESMALL -
-* This contains a bit-mask describing the minimum size frame that
-* will be bundled. The default masks the lower 7 bits, which means
-* that any frame less than 128 bytes in length will not be bundled,
-* but will instead immediately generate an interrupt. This does
-* not affect the current bundle in any way. Any frame that is 128
-* bytes or large will be bundled normally. This feature is meant
-* to provide immediate indication of ACK frames in a TCP environment.
-* Customers were seeing poor performance when a machine with CPUSaver
-* enabled was sending but not receiving. The delay introduced when
-* the ACKs were received was enough to reduce total throughput, because
-* the sender would sit idle until the ACK was finally seen.
-*
-* The current default is 0xFF80, which masks out the lower 7 bits.
-* This means that any frame which is x7F (127) bytes or smaller
-* will cause an immediate interrupt. Because this value must be a
-* bit mask, there are only a few valid values that can be used. To
-* turn this feature off, the driver can write the value xFFFF to the
-* lower word of this instruction (in the same way that the other
-* parameters are used). Likewise, a value of 0xF800 (2047) would
-* cause an interrupt to be generated for every frame, because all
-* standard Ethernet frames are <= 2047 bytes in length.
-*************************************************************************/
-
-/* if you wish to disable the ucode functionality, while maintaining the
- * workarounds it provides, set the following defines to:
- * BUNDLESMALL 0
- * BUNDLEMAX 1
- * INTDELAY 1
- */
-#define BUNDLESMALL 1
-#define BUNDLEMAX (u16)6
-#define INTDELAY (u16)1536 /* 0x600 */
-
-/* Initialize firmware */
-static const struct firmware *e100_request_firmware(struct nic *nic)
-{
- const char *fw_name;
- const struct firmware *fw = nic->fw;
- u8 timer, bundle, min_size;
- int err = 0;
-
- /* do not load u-code for ICH devices */
- if (nic->flags & ich)
- return NULL;
-
- /* Search for ucode match against h/w revision */
- if (nic->mac == mac_82559_D101M)
- fw_name = FIRMWARE_D101M;
- else if (nic->mac == mac_82559_D101S)
- fw_name = FIRMWARE_D101S;
- else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
- fw_name = FIRMWARE_D102E;
- else /* No ucode on other devices */
- return NULL;
-
- /* If the firmware has not previously been loaded, request a pointer
- * to it. If it was previously loaded, we are reinitializing the
- * adapter, possibly in a resume from hibernate, in which case
- * request_firmware() cannot be used.
- */
- if (!fw)
- err = request_firmware(&fw, fw_name, &nic->pdev->dev);
-
- if (err) {
- netif_err(nic, probe, nic->netdev,
- "Failed to load firmware \"%s\": %d\n",
- fw_name, err);
- return ERR_PTR(err);
- }
-
- /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
- indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
- if (fw->size != UCODE_SIZE * 4 + 3) {
- netif_err(nic, probe, nic->netdev,
- "Firmware \"%s\" has wrong size %zu\n",
- fw_name, fw->size);
- release_firmware(fw);
- return ERR_PTR(-EINVAL);
- }
-
- /* Read timer, bundle and min_size from end of firmware blob */
- timer = fw->data[UCODE_SIZE * 4];
- bundle = fw->data[UCODE_SIZE * 4 + 1];
- min_size = fw->data[UCODE_SIZE * 4 + 2];
-
- if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
- min_size >= UCODE_SIZE) {
- netif_err(nic, probe, nic->netdev,
- "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
- fw_name, timer, bundle, min_size);
- release_firmware(fw);
- return ERR_PTR(-EINVAL);
- }
-
- /* OK, firmware is validated and ready to use. Save a pointer
- * to it in the nic */
- nic->fw = fw;
- return fw;
-}
-
-static void e100_setup_ucode(struct nic *nic, struct cb *cb,
- struct sk_buff *skb)
-{
- const struct firmware *fw = (void *)skb;
- u8 timer, bundle, min_size;
-
- /* It's not a real skb; we just abused the fact that e100_exec_cb
- will pass it through to here... */
- cb->skb = NULL;
-
- /* firmware is stored as little endian already */
- memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
-
- /* Read timer, bundle and min_size from end of firmware blob */
- timer = fw->data[UCODE_SIZE * 4];
- bundle = fw->data[UCODE_SIZE * 4 + 1];
- min_size = fw->data[UCODE_SIZE * 4 + 2];
-
- /* Insert user-tunable settings in cb->u.ucode */
- cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
- cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
- cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
- cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
- cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
- cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
-
- cb->command = cpu_to_le16(cb_ucode | cb_el);
-}
-
-static inline int e100_load_ucode_wait(struct nic *nic)
-{
- const struct firmware *fw;
- int err = 0, counter = 50;
- struct cb *cb = nic->cb_to_clean;
-
- fw = e100_request_firmware(nic);
- /* If it's NULL, then no ucode is required */
- if (!fw || IS_ERR(fw))
- return PTR_ERR(fw);
-
- if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
- netif_err(nic, probe, nic->netdev,
- "ucode cmd failed with error %d\n", err);
-
- /* must restart cuc */
- nic->cuc_cmd = cuc_start;
-
- /* wait for completion */
- e100_write_flush(nic);
- udelay(10);
-
- /* wait for possibly (ouch) 500ms */
- while (!(cb->status & cpu_to_le16(cb_complete))) {
- msleep(10);
- if (!--counter) break;
- }
-
- /* ack any interrupts, something could have been set */
- iowrite8(~0, &nic->csr->scb.stat_ack);
-
- /* if the command failed, or is not OK, notify and return */
- if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
- netif_err(nic, probe, nic->netdev, "ucode load failed\n");
- err = -EPERM;
- }
-
- return err;
-}
-
-static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
- struct sk_buff *skb)
-{
- cb->command = cpu_to_le16(cb_iaaddr);
- memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
-}
-
-static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
-{
- cb->command = cpu_to_le16(cb_dump);
- cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
- offsetof(struct mem, dump_buf));
-}
-
-static int e100_phy_check_without_mii(struct nic *nic)
-{
- u8 phy_type;
- int without_mii;
-
- phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
-
- switch (phy_type) {
- case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
- case I82503: /* Non-MII PHY; UNTESTED! */
- case S80C24: /* Non-MII PHY; tested and working */
- /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
- * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
- * doesn't have a programming interface of any sort. The
- * media is sensed automatically based on how the link partner
- * is configured. This is, in essence, manual configuration.
- */
- netif_info(nic, probe, nic->netdev,
- "found MII-less i82503 or 80c24 or other PHY\n");
-
- nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
- nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
-
- /* these might be needed for certain MII-less cards...
- * nic->flags |= ich;
- * nic->flags |= ich_10h_workaround; */
-
- without_mii = 1;
- break;
- default:
- without_mii = 0;
- break;
- }
- return without_mii;
-}
-
-#define NCONFIG_AUTO_SWITCH 0x0080
-#define MII_NSC_CONG MII_RESV1
-#define NSC_CONG_ENABLE 0x0100
-#define NSC_CONG_TXREADY 0x0400
-#define ADVERTISE_FC_SUPPORTED 0x0400
-static int e100_phy_init(struct nic *nic)
-{
- struct net_device *netdev = nic->netdev;
- u32 addr;
- u16 bmcr, stat, id_lo, id_hi, cong;
-
- /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
- for (addr = 0; addr < 32; addr++) {
- nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
- bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
- stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
- stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
- if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
- break;
- }
- if (addr == 32) {
- /* uhoh, no PHY detected: check whether we seem to be some
- * weird, rare variant which is *known* to not have any MII.
- * But do this AFTER MII checking only, since this does
- * lookup of EEPROM values which may easily be unreliable. */
- if (e100_phy_check_without_mii(nic))
- return 0; /* simply return and hope for the best */
- else {
- /* for unknown cases log a fatal error */
- netif_err(nic, hw, nic->netdev,
- "Failed to locate any known PHY, aborting\n");
- return -EAGAIN;
- }
- } else
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "phy_addr = %d\n", nic->mii.phy_id);
-
- /* Get phy ID */
- id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
- id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
- nic->phy = (u32)id_hi << 16 | (u32)id_lo;
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "phy ID = 0x%08X\n", nic->phy);
-
- /* Select the phy and isolate the rest */
- for (addr = 0; addr < 32; addr++) {
- if (addr != nic->mii.phy_id) {
- mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
- } else if (nic->phy != phy_82552_v) {
- bmcr = mdio_read(netdev, addr, MII_BMCR);
- mdio_write(netdev, addr, MII_BMCR,
- bmcr & ~BMCR_ISOLATE);
- }
- }
- /*
- * Workaround for 82552:
- * Clear the ISOLATE bit on selected phy_id last (mirrored on all
- * other phy_id's) using bmcr value from addr discovery loop above.
- */
- if (nic->phy == phy_82552_v)
- mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
- bmcr & ~BMCR_ISOLATE);
-
- /* Handle National tx phys */
-#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
- if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
- /* Disable congestion control */
- cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
- cong |= NSC_CONG_TXREADY;
- cong &= ~NSC_CONG_ENABLE;
- mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
- }
-
- if (nic->phy == phy_82552_v) {
- u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
-
- /* assign special tweaked mdio_ctrl() function */
- nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
-
- /* Workaround Si not advertising flow-control during autoneg */
- advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
- mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
-
- /* Reset for the above changes to take effect */
- bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
- bmcr |= BMCR_RESET;
- mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
- } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
- (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
- !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
- /* enable/disable MDI/MDI-X auto-switching. */
- mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
- nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
- }
-
- return 0;
-}
-
-static int e100_hw_init(struct nic *nic)
-{
- int err = 0;
-
- e100_hw_reset(nic);
-
- netif_err(nic, hw, nic->netdev, "e100_hw_init\n");
- if (!in_interrupt() && (err = e100_self_test(nic)))
- return err;
-
- if ((err = e100_phy_init(nic)))
- return err;
- if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
- return err;
- if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
- return err;
- if ((err = e100_load_ucode_wait(nic)))
- return err;
- if ((err = e100_exec_cb(nic, NULL, e100_configure)))
- return err;
- if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
- return err;
- if ((err = e100_exec_cmd(nic, cuc_dump_addr,
- nic->dma_addr + offsetof(struct mem, stats))))
- return err;
- if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
- return err;
-
- e100_disable_irq(nic);
-
- return 0;
-}
-
-static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
-{
- struct net_device *netdev = nic->netdev;
- struct netdev_hw_addr *ha;
- u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS);
-
- cb->command = cpu_to_le16(cb_multi);
- cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
- i = 0;
- netdev_for_each_mc_addr(ha, netdev) {
- if (i == count)
- break;
- memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
- ETH_ALEN);
- }
-}
-
-static void e100_set_multicast_list(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
-
- netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
- "mc_count=%d, flags=0x%04X\n",
- netdev_mc_count(netdev), netdev->flags);
-
- if (netdev->flags & IFF_PROMISC)
- nic->flags |= promiscuous;
- else
- nic->flags &= ~promiscuous;
-
- if (netdev->flags & IFF_ALLMULTI ||
- netdev_mc_count(netdev) > E100_MAX_MULTICAST_ADDRS)
- nic->flags |= multicast_all;
- else
- nic->flags &= ~multicast_all;
-
- e100_exec_cb(nic, NULL, e100_configure);
- e100_exec_cb(nic, NULL, e100_multi);
-}
-
-static void e100_update_stats(struct nic *nic)
-{
- struct net_device *dev = nic->netdev;
- struct net_device_stats *ns = &dev->stats;
- struct stats *s = &nic->mem->stats;
- __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
- (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
- &s->complete;
-
- /* Device's stats reporting may take several microseconds to
- * complete, so we're always waiting for results of the
- * previous command. */
-
- if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
- *complete = 0;
- nic->tx_frames = le32_to_cpu(s->tx_good_frames);
- nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
- ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
- ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
- ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
- ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
- ns->collisions += nic->tx_collisions;
- ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
- le32_to_cpu(s->tx_lost_crs);
- ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
- nic->rx_over_length_errors;
- ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
- ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
- ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
- ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
- ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
- ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
- le32_to_cpu(s->rx_alignment_errors) +
- le32_to_cpu(s->rx_short_frame_errors) +
- le32_to_cpu(s->rx_cdt_errors);
- nic->tx_deferred += le32_to_cpu(s->tx_deferred);
- nic->tx_single_collisions +=
- le32_to_cpu(s->tx_single_collisions);
- nic->tx_multiple_collisions +=
- le32_to_cpu(s->tx_multiple_collisions);
- if (nic->mac >= mac_82558_D101_A4) {
- nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
- nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
- nic->rx_fc_unsupported +=
- le32_to_cpu(s->fc_rcv_unsupported);
- if (nic->mac >= mac_82559_D101M) {
- nic->tx_tco_frames +=
- le16_to_cpu(s->xmt_tco_frames);
- nic->rx_tco_frames +=
- le16_to_cpu(s->rcv_tco_frames);
- }
- }
- }
-
-
- if (e100_exec_cmd(nic, cuc_dump_reset, 0))
- netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
- "exec cuc_dump_reset failed\n");
-}
-
-static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
-{
- /* Adjust inter-frame-spacing (IFS) between two transmits if
- * we're getting collisions on a half-duplex connection. */
-
- if (duplex == DUPLEX_HALF) {
- u32 prev = nic->adaptive_ifs;
- u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
-
- if ((nic->tx_frames / 32 < nic->tx_collisions) &&
- (nic->tx_frames > min_frames)) {
- if (nic->adaptive_ifs < 60)
- nic->adaptive_ifs += 5;
- } else if (nic->tx_frames < min_frames) {
- if (nic->adaptive_ifs >= 5)
- nic->adaptive_ifs -= 5;
- }
- if (nic->adaptive_ifs != prev)
- e100_exec_cb(nic, NULL, e100_configure);
- }
-}
-
-static void e100_watchdog(unsigned long data)
-{
- struct nic *nic = (struct nic *)data;
- struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
- u32 speed;
-
- netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
- "right now = %ld\n", jiffies);
-
- /* mii library handles link maintenance tasks */
-
- mii_ethtool_gset(&nic->mii, &cmd);
- speed = ethtool_cmd_speed(&cmd);
-
- if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
- netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n",
- speed == SPEED_100 ? 100 : 10,
- cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
- } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
- netdev_info(nic->netdev, "NIC Link is Down\n");
- }
-
- mii_check_link(&nic->mii);
-
- /* Software generated interrupt to recover from (rare) Rx
- * allocation failure.
- * Unfortunately have to use a spinlock to not re-enable interrupts
- * accidentally, due to hardware that shares a register between the
- * interrupt mask bit and the SW Interrupt generation bit */
- spin_lock_irq(&nic->cmd_lock);
- iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
- e100_write_flush(nic);
- spin_unlock_irq(&nic->cmd_lock);
-
- e100_update_stats(nic);
- e100_adjust_adaptive_ifs(nic, speed, cmd.duplex);
-
- if (nic->mac <= mac_82557_D100_C)
- /* Issue a multicast command to workaround a 557 lock up */
- e100_set_multicast_list(nic->netdev);
-
- if (nic->flags & ich && speed == SPEED_10 && cmd.duplex == DUPLEX_HALF)
- /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
- nic->flags |= ich_10h_workaround;
- else
- nic->flags &= ~ich_10h_workaround;
-
- mod_timer(&nic->watchdog,
- round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
-}
-
-static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
- struct sk_buff *skb)
-{
- cb->command = nic->tx_command;
- /* interrupt every 16 packets regardless of delay */
- if ((nic->cbs_avail & ~15) == nic->cbs_avail)
- cb->command |= cpu_to_le16(cb_i);
- cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
- cb->u.tcb.tcb_byte_count = 0;
- cb->u.tcb.threshold = nic->tx_threshold;
- cb->u.tcb.tbd_count = 1;
- cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
- skb->data, skb->len, PCI_DMA_TODEVICE));
- /* check for mapping failure? */
- cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
-}
-
-static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- int err;
-
- if (nic->flags & ich_10h_workaround) {
- /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
- Issue a NOP command followed by a 1us delay before
- issuing the Tx command. */
- if (e100_exec_cmd(nic, cuc_nop, 0))
- netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
- "exec cuc_nop failed\n");
- udelay(1);
- }
-
- err = e100_exec_cb(nic, skb, e100_xmit_prepare);
-
- switch (err) {
- case -ENOSPC:
- /* We queued the skb, but now we're out of space. */
- netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
- "No space for CB\n");
- netif_stop_queue(netdev);
- break;
- case -ENOMEM:
- /* This is a hard error - log it. */
- netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
- "Out of Tx resources, returning skb\n");
- netif_stop_queue(netdev);
- return NETDEV_TX_BUSY;
- }
-
- return NETDEV_TX_OK;
-}
-
-static int e100_tx_clean(struct nic *nic)
-{
- struct net_device *dev = nic->netdev;
- struct cb *cb;
- int tx_cleaned = 0;
-
- spin_lock(&nic->cb_lock);
-
- /* Clean CBs marked complete */
- for (cb = nic->cb_to_clean;
- cb->status & cpu_to_le16(cb_complete);
- cb = nic->cb_to_clean = cb->next) {
- rmb(); /* read skb after status */
- netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
- "cb[%d]->status = 0x%04X\n",
- (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
- cb->status);
-
- if (likely(cb->skb != NULL)) {
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += cb->skb->len;
-
- pci_unmap_single(nic->pdev,
- le32_to_cpu(cb->u.tcb.tbd.buf_addr),
- le16_to_cpu(cb->u.tcb.tbd.size),
- PCI_DMA_TODEVICE);
- dev_kfree_skb_any(cb->skb);
- cb->skb = NULL;
- tx_cleaned = 1;
- }
- cb->status = 0;
- nic->cbs_avail++;
- }
-
- spin_unlock(&nic->cb_lock);
-
- /* Recover from running out of Tx resources in xmit_frame */
- if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
- netif_wake_queue(nic->netdev);
-
- return tx_cleaned;
-}
-
-static void e100_clean_cbs(struct nic *nic)
-{
- if (nic->cbs) {
- while (nic->cbs_avail != nic->params.cbs.count) {
- struct cb *cb = nic->cb_to_clean;
- if (cb->skb) {
- pci_unmap_single(nic->pdev,
- le32_to_cpu(cb->u.tcb.tbd.buf_addr),
- le16_to_cpu(cb->u.tcb.tbd.size),
- PCI_DMA_TODEVICE);
- dev_kfree_skb(cb->skb);
- }
- nic->cb_to_clean = nic->cb_to_clean->next;
- nic->cbs_avail++;
- }
- pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
- nic->cbs = NULL;
- nic->cbs_avail = 0;
- }
- nic->cuc_cmd = cuc_start;
- nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
- nic->cbs;
-}
-
-static int e100_alloc_cbs(struct nic *nic)
-{
- struct cb *cb;
- unsigned int i, count = nic->params.cbs.count;
-
- nic->cuc_cmd = cuc_start;
- nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
- nic->cbs_avail = 0;
-
- nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
- &nic->cbs_dma_addr);
- if (!nic->cbs)
- return -ENOMEM;
- memset(nic->cbs, 0, count * sizeof(struct cb));
-
- for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
- cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
- cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
-
- cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
- cb->link = cpu_to_le32(nic->cbs_dma_addr +
- ((i+1) % count) * sizeof(struct cb));
- }
-
- nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
- nic->cbs_avail = count;
-
- return 0;
-}
-
-static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
-{
- if (!nic->rxs) return;
- if (RU_SUSPENDED != nic->ru_running) return;
-
- /* handle init time starts */
- if (!rx) rx = nic->rxs;
-
- /* (Re)start RU if suspended or idle and RFA is non-NULL */
- if (rx->skb) {
- e100_exec_cmd(nic, ruc_start, rx->dma_addr);
- nic->ru_running = RU_RUNNING;
- }
-}
-
-#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
-static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
-{
- if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
- return -ENOMEM;
-
- /* Init, and map the RFD. */
- skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
- rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
- RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
-
- if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
- dev_kfree_skb_any(rx->skb);
- rx->skb = NULL;
- rx->dma_addr = 0;
- return -ENOMEM;
- }
-
- /* Link the RFD to end of RFA by linking previous RFD to
- * this one. We are safe to touch the previous RFD because
- * it is protected by the before last buffer's el bit being set */
- if (rx->prev->skb) {
- struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
- put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
- pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
- sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
- }
-
- return 0;
-}
-
-static int e100_rx_indicate(struct nic *nic, struct rx *rx,
- unsigned int *work_done, unsigned int work_to_do)
-{
- struct net_device *dev = nic->netdev;
- struct sk_buff *skb = rx->skb;
- struct rfd *rfd = (struct rfd *)skb->data;
- u16 rfd_status, actual_size;
-
- if (unlikely(work_done && *work_done >= work_to_do))
- return -EAGAIN;
-
- /* Need to sync before taking a peek at cb_complete bit */
- pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
- rfd_status = le16_to_cpu(rfd->status);
-
- netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
- "status=0x%04X\n", rfd_status);
- rmb(); /* read size after status bit */
-
- /* If data isn't ready, nothing to indicate */
- if (unlikely(!(rfd_status & cb_complete))) {
- /* If the next buffer has the el bit, but we think the receiver
- * is still running, check to see if it really stopped while
- * we had interrupts off.
- * This allows for a fast restart without re-enabling
- * interrupts */
- if ((le16_to_cpu(rfd->command) & cb_el) &&
- (RU_RUNNING == nic->ru_running))
-
- if (ioread8(&nic->csr->scb.status) & rus_no_res)
- nic->ru_running = RU_SUSPENDED;
- pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
- sizeof(struct rfd),
- PCI_DMA_FROMDEVICE);
- return -ENODATA;
- }
-
- /* Get actual data size */
- actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
- if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
- actual_size = RFD_BUF_LEN - sizeof(struct rfd);
-
- /* Get data */
- pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
-
- /* If this buffer has the el bit, but we think the receiver
- * is still running, check to see if it really stopped while
- * we had interrupts off.
- * This allows for a fast restart without re-enabling interrupts.
- * This can happen when the RU sees the size change but also sees
- * the el bit set. */
- if ((le16_to_cpu(rfd->command) & cb_el) &&
- (RU_RUNNING == nic->ru_running)) {
-
- if (ioread8(&nic->csr->scb.status) & rus_no_res)
- nic->ru_running = RU_SUSPENDED;
- }
-
- /* Pull off the RFD and put the actual data (minus eth hdr) */
- skb_reserve(skb, sizeof(struct rfd));
- skb_put(skb, actual_size);
- skb->protocol = eth_type_trans(skb, nic->netdev);
-
- if (unlikely(!(rfd_status & cb_ok))) {
- /* Don't indicate if hardware indicates errors */
- dev_kfree_skb_any(skb);
- } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
- /* Don't indicate oversized frames */
- nic->rx_over_length_errors++;
- dev_kfree_skb_any(skb);
- } else {
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += actual_size;
- netif_receive_skb(skb);
- if (work_done)
- (*work_done)++;
- }
-
- rx->skb = NULL;
-
- return 0;
-}
-
-static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
- unsigned int work_to_do)
-{
- struct rx *rx;
- int restart_required = 0, err = 0;
- struct rx *old_before_last_rx, *new_before_last_rx;
- struct rfd *old_before_last_rfd, *new_before_last_rfd;
-
- /* Indicate newly arrived packets */
- for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
- err = e100_rx_indicate(nic, rx, work_done, work_to_do);
- /* Hit quota or no more to clean */
- if (-EAGAIN == err || -ENODATA == err)
- break;
- }
-
-
- /* On EAGAIN, hit quota so have more work to do, restart once
- * cleanup is complete.
- * Else, are we already rnr? then pay attention!!! this ensures that
- * the state machine progression never allows a start with a
- * partially cleaned list, avoiding a race between hardware
- * and rx_to_clean when in NAPI mode */
- if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
- restart_required = 1;
-
- old_before_last_rx = nic->rx_to_use->prev->prev;
- old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
-
- /* Alloc new skbs to refill list */
- for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
- if (unlikely(e100_rx_alloc_skb(nic, rx)))
- break; /* Better luck next time (see watchdog) */
- }
-
- new_before_last_rx = nic->rx_to_use->prev->prev;
- if (new_before_last_rx != old_before_last_rx) {
- /* Set the el-bit on the buffer that is before the last buffer.
- * This lets us update the next pointer on the last buffer
- * without worrying about hardware touching it.
- * We set the size to 0 to prevent hardware from touching this
- * buffer.
- * When the hardware hits the before last buffer with el-bit
- * and size of 0, it will RNR interrupt, the RUS will go into
- * the No Resources state. It will not complete nor write to
- * this buffer. */
- new_before_last_rfd =
- (struct rfd *)new_before_last_rx->skb->data;
- new_before_last_rfd->size = 0;
- new_before_last_rfd->command |= cpu_to_le16(cb_el);
- pci_dma_sync_single_for_device(nic->pdev,
- new_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
-
- /* Now that we have a new stopping point, we can clear the old
- * stopping point. We must sync twice to get the proper
- * ordering on the hardware side of things. */
- old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
- pci_dma_sync_single_for_device(nic->pdev,
- old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
- old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
- pci_dma_sync_single_for_device(nic->pdev,
- old_before_last_rx->dma_addr, sizeof(struct rfd),
- PCI_DMA_BIDIRECTIONAL);
- }
-
- if (restart_required) {
- // ack the rnr?
- iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
- e100_start_receiver(nic, nic->rx_to_clean);
- if (work_done)
- (*work_done)++;
- }
-}
-
-static void e100_rx_clean_list(struct nic *nic)
-{
- struct rx *rx;
- unsigned int i, count = nic->params.rfds.count;
-
- nic->ru_running = RU_UNINITIALIZED;
-
- if (nic->rxs) {
- for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
- if (rx->skb) {
- pci_unmap_single(nic->pdev, rx->dma_addr,
- RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
- dev_kfree_skb(rx->skb);
- }
- }
- kfree(nic->rxs);
- nic->rxs = NULL;
- }
-
- nic->rx_to_use = nic->rx_to_clean = NULL;
-}
-
-static int e100_rx_alloc_list(struct nic *nic)
-{
- struct rx *rx;
- unsigned int i, count = nic->params.rfds.count;
- struct rfd *before_last;
-
- nic->rx_to_use = nic->rx_to_clean = NULL;
- nic->ru_running = RU_UNINITIALIZED;
-
- if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
- return -ENOMEM;
-
- for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
- rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
- rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
- if (e100_rx_alloc_skb(nic, rx)) {
- e100_rx_clean_list(nic);
- return -ENOMEM;
- }
- }
- /* Set the el-bit on the buffer that is before the last buffer.
- * This lets us update the next pointer on the last buffer without
- * worrying about hardware touching it.
- * We set the size to 0 to prevent hardware from touching this buffer.
- * When the hardware hits the before last buffer with el-bit and size
- * of 0, it will RNR interrupt, the RU will go into the No Resources
- * state. It will not complete nor write to this buffer. */
- rx = nic->rxs->prev->prev;
- before_last = (struct rfd *)rx->skb->data;
- before_last->command |= cpu_to_le16(cb_el);
- before_last->size = 0;
- pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
- sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
-
- nic->rx_to_use = nic->rx_to_clean = nic->rxs;
- nic->ru_running = RU_SUSPENDED;
-
- return 0;
-}
-
-static irqreturn_t e100_intr(int irq, void *dev_id)
-{
- struct net_device *netdev = dev_id;
- struct nic *nic = netdev_priv(netdev);
- u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
-
- netif_printk(nic, intr, KERN_DEBUG, nic->netdev,
- "stat_ack = 0x%02X\n", stat_ack);
-
- if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
- stat_ack == stat_ack_not_present) /* Hardware is ejected */
- return IRQ_NONE;
-
- /* Ack interrupt(s) */
- iowrite8(stat_ack, &nic->csr->scb.stat_ack);
-
- /* We hit Receive No Resource (RNR); restart RU after cleaning */
- if (stat_ack & stat_ack_rnr)
- nic->ru_running = RU_SUSPENDED;
-
- if (likely(napi_schedule_prep(&nic->napi))) {
- e100_disable_irq(nic);
- __napi_schedule(&nic->napi);
- }
-
- return IRQ_HANDLED;
-}
-
-static int e100_poll(struct napi_struct *napi, int budget)
-{
- struct nic *nic = container_of(napi, struct nic, napi);
- unsigned int work_done = 0;
-
- e100_rx_clean(nic, &work_done, budget);
- e100_tx_clean(nic);
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- e100_enable_irq(nic);
- }
-
- return work_done;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-static void e100_netpoll(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
-
- e100_disable_irq(nic);
- e100_intr(nic->pdev->irq, netdev);
- e100_tx_clean(nic);
- e100_enable_irq(nic);
-}
-#endif
-
-static int e100_set_mac_address(struct net_device *netdev, void *p)
-{
- struct nic *nic = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- e100_exec_cb(nic, NULL, e100_setup_iaaddr);
-
- return 0;
-}
-
-static int e100_change_mtu(struct net_device *netdev, int new_mtu)
-{
- if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
- return -EINVAL;
- netdev->mtu = new_mtu;
- return 0;
-}
-
-static int e100_asf(struct nic *nic)
-{
- /* ASF can be enabled from eeprom */
- return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
- (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
- !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
- ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
-}
-
-static int e100_up(struct nic *nic)
-{
- int err;
-
- if ((err = e100_rx_alloc_list(nic)))
- return err;
- if ((err = e100_alloc_cbs(nic)))
- goto err_rx_clean_list;
- if ((err = e100_hw_init(nic)))
- goto err_clean_cbs;
- e100_set_multicast_list(nic->netdev);
- e100_start_receiver(nic, NULL);
- mod_timer(&nic->watchdog, jiffies);
- if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
- nic->netdev->name, nic->netdev)))
- goto err_no_irq;
- netif_wake_queue(nic->netdev);
- napi_enable(&nic->napi);
- /* enable ints _after_ enabling poll, preventing a race between
- * disable ints+schedule */
- e100_enable_irq(nic);
- return 0;
-
-err_no_irq:
- del_timer_sync(&nic->watchdog);
-err_clean_cbs:
- e100_clean_cbs(nic);
-err_rx_clean_list:
- e100_rx_clean_list(nic);
- return err;
-}
-
-static void e100_down(struct nic *nic)
-{
- /* wait here for poll to complete */
- napi_disable(&nic->napi);
- netif_stop_queue(nic->netdev);
- e100_hw_reset(nic);
- free_irq(nic->pdev->irq, nic->netdev);
- del_timer_sync(&nic->watchdog);
- netif_carrier_off(nic->netdev);
- e100_clean_cbs(nic);
- e100_rx_clean_list(nic);
-}
-
-static void e100_tx_timeout(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
-
- /* Reset outside of interrupt context, to avoid request_irq
- * in interrupt context */
- schedule_work(&nic->tx_timeout_task);
-}
-
-static void e100_tx_timeout_task(struct work_struct *work)
-{
- struct nic *nic = container_of(work, struct nic, tx_timeout_task);
- struct net_device *netdev = nic->netdev;
-
- netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
- "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status));
-
- rtnl_lock();
- if (netif_running(netdev)) {
- e100_down(netdev_priv(netdev));
- e100_up(netdev_priv(netdev));
- }
- rtnl_unlock();
-}
-
-static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
-{
- int err;
- struct sk_buff *skb;
-
- /* Use driver resources to perform internal MAC or PHY
- * loopback test. A single packet is prepared and transmitted
- * in loopback mode, and the test passes if the received
- * packet compares byte-for-byte to the transmitted packet. */
-
- if ((err = e100_rx_alloc_list(nic)))
- return err;
- if ((err = e100_alloc_cbs(nic)))
- goto err_clean_rx;
-
- /* ICH PHY loopback is broken so do MAC loopback instead */
- if (nic->flags & ich && loopback_mode == lb_phy)
- loopback_mode = lb_mac;
-
- nic->loopback = loopback_mode;
- if ((err = e100_hw_init(nic)))
- goto err_loopback_none;
-
- if (loopback_mode == lb_phy)
- mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
- BMCR_LOOPBACK);
-
- e100_start_receiver(nic, NULL);
-
- if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
- err = -ENOMEM;
- goto err_loopback_none;
- }
- skb_put(skb, ETH_DATA_LEN);
- memset(skb->data, 0xFF, ETH_DATA_LEN);
- e100_xmit_frame(skb, nic->netdev);
-
- msleep(10);
-
- pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
- RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
-
- if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
- skb->data, ETH_DATA_LEN))
- err = -EAGAIN;
-
-err_loopback_none:
- mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
- nic->loopback = lb_none;
- e100_clean_cbs(nic);
- e100_hw_reset(nic);
-err_clean_rx:
- e100_rx_clean_list(nic);
- return err;
-}
-
-#define MII_LED_CONTROL 0x1B
-#define E100_82552_LED_OVERRIDE 0x19
-#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
-#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
-
-static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
-{
- struct nic *nic = netdev_priv(netdev);
- return mii_ethtool_gset(&nic->mii, cmd);
-}
-
-static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
-{
- struct nic *nic = netdev_priv(netdev);
- int err;
-
- mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
- err = mii_ethtool_sset(&nic->mii, cmd);
- e100_exec_cb(nic, NULL, e100_configure);
-
- return err;
-}
-
-static void e100_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *info)
-{
- struct nic *nic = netdev_priv(netdev);
- strcpy(info->driver, DRV_NAME);
- strcpy(info->version, DRV_VERSION);
- strcpy(info->fw_version, "N/A");
- strcpy(info->bus_info, pci_name(nic->pdev));
-}
-
-#define E100_PHY_REGS 0x1C
-static int e100_get_regs_len(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
-}
-
-static void e100_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct nic *nic = netdev_priv(netdev);
- u32 *buff = p;
- int i;
-
- regs->version = (1 << 24) | nic->pdev->revision;
- buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
- ioread8(&nic->csr->scb.cmd_lo) << 16 |
- ioread16(&nic->csr->scb.status);
- for (i = E100_PHY_REGS; i >= 0; i--)
- buff[1 + E100_PHY_REGS - i] =
- mdio_read(netdev, nic->mii.phy_id, i);
- memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
- e100_exec_cb(nic, NULL, e100_dump);
- msleep(10);
- memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
- sizeof(nic->mem->dump_buf));
-}
-
-static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct nic *nic = netdev_priv(netdev);
- wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
- wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
-}
-
-static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct nic *nic = netdev_priv(netdev);
-
- if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
- !device_can_wakeup(&nic->pdev->dev))
- return -EOPNOTSUPP;
-
- if (wol->wolopts)
- nic->flags |= wol_magic;
- else
- nic->flags &= ~wol_magic;
-
- device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
-
- e100_exec_cb(nic, NULL, e100_configure);
-
- return 0;
-}
-
-static u32 e100_get_msglevel(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return nic->msg_enable;
-}
-
-static void e100_set_msglevel(struct net_device *netdev, u32 value)
-{
- struct nic *nic = netdev_priv(netdev);
- nic->msg_enable = value;
-}
-
-static int e100_nway_reset(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return mii_nway_restart(&nic->mii);
-}
-
-static u32 e100_get_link(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return mii_link_ok(&nic->mii);
-}
-
-static int e100_get_eeprom_len(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- return nic->eeprom_wc << 1;
-}
-
-#define E100_EEPROM_MAGIC 0x1234
-static int e100_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct nic *nic = netdev_priv(netdev);
-
- eeprom->magic = E100_EEPROM_MAGIC;
- memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
-
- return 0;
-}
-
-static int e100_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct nic *nic = netdev_priv(netdev);
-
- if (eeprom->magic != E100_EEPROM_MAGIC)
- return -EINVAL;
-
- memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
-
- return e100_eeprom_save(nic, eeprom->offset >> 1,
- (eeprom->len >> 1) + 1);
-}
-
-static void e100_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct nic *nic = netdev_priv(netdev);
- struct param_range *rfds = &nic->params.rfds;
- struct param_range *cbs = &nic->params.cbs;
-
- ring->rx_max_pending = rfds->max;
- ring->tx_max_pending = cbs->max;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rfds->count;
- ring->tx_pending = cbs->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int e100_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct nic *nic = netdev_priv(netdev);
- struct param_range *rfds = &nic->params.rfds;
- struct param_range *cbs = &nic->params.cbs;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- if (netif_running(netdev))
- e100_down(nic);
- rfds->count = max(ring->rx_pending, rfds->min);
- rfds->count = min(rfds->count, rfds->max);
- cbs->count = max(ring->tx_pending, cbs->min);
- cbs->count = min(cbs->count, cbs->max);
- netif_info(nic, drv, nic->netdev, "Ring Param settings: rx: %d, tx %d\n",
- rfds->count, cbs->count);
- if (netif_running(netdev))
- e100_up(nic);
-
- return 0;
-}
-
-static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
- "Link test (on/offline)",
- "Eeprom test (on/offline)",
- "Self test (offline)",
- "Mac loopback (offline)",
- "Phy loopback (offline)",
-};
-#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
-
-static void e100_diag_test(struct net_device *netdev,
- struct ethtool_test *test, u64 *data)
-{
- struct ethtool_cmd cmd;
- struct nic *nic = netdev_priv(netdev);
- int i, err;
-
- memset(data, 0, E100_TEST_LEN * sizeof(u64));
- data[0] = !mii_link_ok(&nic->mii);
- data[1] = e100_eeprom_load(nic);
- if (test->flags & ETH_TEST_FL_OFFLINE) {
-
- /* save speed, duplex & autoneg settings */
- err = mii_ethtool_gset(&nic->mii, &cmd);
-
- if (netif_running(netdev))
- e100_down(nic);
- data[2] = e100_self_test(nic);
- data[3] = e100_loopback_test(nic, lb_mac);
- data[4] = e100_loopback_test(nic, lb_phy);
-
- /* restore speed, duplex & autoneg settings */
- err = mii_ethtool_sset(&nic->mii, &cmd);
-
- if (netif_running(netdev))
- e100_up(nic);
- }
- for (i = 0; i < E100_TEST_LEN; i++)
- test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
-
- msleep_interruptible(4 * 1000);
-}
-
-static int e100_set_phys_id(struct net_device *netdev,
- enum ethtool_phys_id_state state)
-{
- struct nic *nic = netdev_priv(netdev);
- enum led_state {
- led_on = 0x01,
- led_off = 0x04,
- led_on_559 = 0x05,
- led_on_557 = 0x07,
- };
- u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
- MII_LED_CONTROL;
- u16 leds = 0;
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- return 2;
-
- case ETHTOOL_ID_ON:
- leds = (nic->phy == phy_82552_v) ? E100_82552_LED_ON :
- (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
- break;
-
- case ETHTOOL_ID_OFF:
- leds = (nic->phy == phy_82552_v) ? E100_82552_LED_OFF : led_off;
- break;
-
- case ETHTOOL_ID_INACTIVE:
- break;
- }
-
- mdio_write(netdev, nic->mii.phy_id, led_reg, leds);
- return 0;
-}
-
-static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
- "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
- "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
- "rx_length_errors", "rx_over_errors", "rx_crc_errors",
- "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
- "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
- "tx_heartbeat_errors", "tx_window_errors",
- /* device-specific stats */
- "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
- "tx_flow_control_pause", "rx_flow_control_pause",
- "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
-};
-#define E100_NET_STATS_LEN 21
-#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
-
-static int e100_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_TEST:
- return E100_TEST_LEN;
- case ETH_SS_STATS:
- return E100_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void e100_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct nic *nic = netdev_priv(netdev);
- int i;
-
- for (i = 0; i < E100_NET_STATS_LEN; i++)
- data[i] = ((unsigned long *)&netdev->stats)[i];
-
- data[i++] = nic->tx_deferred;
- data[i++] = nic->tx_single_collisions;
- data[i++] = nic->tx_multiple_collisions;
- data[i++] = nic->tx_fc_pause;
- data[i++] = nic->rx_fc_pause;
- data[i++] = nic->rx_fc_unsupported;
- data[i++] = nic->tx_tco_frames;
- data[i++] = nic->rx_tco_frames;
-}
-
-static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-{
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
- break;
- case ETH_SS_STATS:
- memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
- break;
- }
-}
-
-static const struct ethtool_ops e100_ethtool_ops = {
- .get_settings = e100_get_settings,
- .set_settings = e100_set_settings,
- .get_drvinfo = e100_get_drvinfo,
- .get_regs_len = e100_get_regs_len,
- .get_regs = e100_get_regs,
- .get_wol = e100_get_wol,
- .set_wol = e100_set_wol,
- .get_msglevel = e100_get_msglevel,
- .set_msglevel = e100_set_msglevel,
- .nway_reset = e100_nway_reset,
- .get_link = e100_get_link,
- .get_eeprom_len = e100_get_eeprom_len,
- .get_eeprom = e100_get_eeprom,
- .set_eeprom = e100_set_eeprom,
- .get_ringparam = e100_get_ringparam,
- .set_ringparam = e100_set_ringparam,
- .self_test = e100_diag_test,
- .get_strings = e100_get_strings,
- .set_phys_id = e100_set_phys_id,
- .get_ethtool_stats = e100_get_ethtool_stats,
- .get_sset_count = e100_get_sset_count,
-};
-
-static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- struct nic *nic = netdev_priv(netdev);
-
- return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
-}
-
-static int e100_alloc(struct nic *nic)
-{
- nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
- &nic->dma_addr);
- return nic->mem ? 0 : -ENOMEM;
-}
-
-static void e100_free(struct nic *nic)
-{
- if (nic->mem) {
- pci_free_consistent(nic->pdev, sizeof(struct mem),
- nic->mem, nic->dma_addr);
- nic->mem = NULL;
- }
-}
-
-static int e100_open(struct net_device *netdev)
-{
- struct nic *nic = netdev_priv(netdev);
- int err = 0;
-
- netif_carrier_off(netdev);
- if ((err = e100_up(nic)))
- netif_err(nic, ifup, nic->netdev, "Cannot open interface, aborting\n");
- return err;
-}
-
-static int e100_close(struct net_device *netdev)
-{
- e100_down(netdev_priv(netdev));
- return 0;
-}
-
-static const struct net_device_ops e100_netdev_ops = {
- .ndo_open = e100_open,
- .ndo_stop = e100_close,
- .ndo_start_xmit = e100_xmit_frame,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_multicast_list = e100_set_multicast_list,
- .ndo_set_mac_address = e100_set_mac_address,
- .ndo_change_mtu = e100_change_mtu,
- .ndo_do_ioctl = e100_do_ioctl,
- .ndo_tx_timeout = e100_tx_timeout,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = e100_netpoll,
-#endif
-};
-
-static int __devinit e100_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct nic *nic;
- int err;
-
- if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
- if (((1 << debug) - 1) & NETIF_MSG_PROBE)
- pr_err("Etherdev alloc failed, aborting\n");
- return -ENOMEM;
- }
-
- netdev->netdev_ops = &e100_netdev_ops;
- SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
- netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- nic = netdev_priv(netdev);
- netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
- nic->netdev = netdev;
- nic->pdev = pdev;
- nic->msg_enable = (1 << debug) - 1;
- nic->mdio_ctrl = mdio_ctrl_hw;
- pci_set_drvdata(pdev, netdev);
-
- if ((err = pci_enable_device(pdev))) {
- netif_err(nic, probe, nic->netdev, "Cannot enable PCI device, aborting\n");
- goto err_out_free_dev;
- }
-
- if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
- netif_err(nic, probe, nic->netdev, "Cannot find proper PCI device base address, aborting\n");
- err = -ENODEV;
- goto err_out_disable_pdev;
- }
-
- if ((err = pci_request_regions(pdev, DRV_NAME))) {
- netif_err(nic, probe, nic->netdev, "Cannot obtain PCI resources, aborting\n");
- goto err_out_disable_pdev;
- }
-
- if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
- netif_err(nic, probe, nic->netdev, "No usable DMA configuration, aborting\n");
- goto err_out_free_res;
- }
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- if (use_io)
- netif_info(nic, probe, nic->netdev, "using i/o access mode\n");
-
- nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
- if (!nic->csr) {
- netif_err(nic, probe, nic->netdev, "Cannot map device registers, aborting\n");
- err = -ENOMEM;
- goto err_out_free_res;
- }
-
- if (ent->driver_data)
- nic->flags |= ich;
- else
- nic->flags &= ~ich;
-
- e100_get_defaults(nic);
-
- /* locks must be initialized before calling hw_reset */
- spin_lock_init(&nic->cb_lock);
- spin_lock_init(&nic->cmd_lock);
- spin_lock_init(&nic->mdio_lock);
-
- /* Reset the device before pci_set_master() in case device is in some
- * funky state and has an interrupt pending - hint: we don't have the
- * interrupt handler registered yet. */
- e100_hw_reset(nic);
-
- pci_set_master(pdev);
-
- init_timer(&nic->watchdog);
- nic->watchdog.function = e100_watchdog;
- nic->watchdog.data = (unsigned long)nic;
-
- INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
-
- if ((err = e100_alloc(nic))) {
- netif_err(nic, probe, nic->netdev, "Cannot alloc driver memory, aborting\n");
- goto err_out_iounmap;
- }
-
- if ((err = e100_eeprom_load(nic)))
- goto err_out_free;
-
- e100_phy_init(nic);
-
- memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
- memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- if (!eeprom_bad_csum_allow) {
- netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n");
- err = -EAGAIN;
- goto err_out_free;
- } else {
- netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, you MUST configure one.\n");
- }
- }
-
- /* Wol magic packet can be enabled from eeprom */
- if ((nic->mac >= mac_82558_D101_A4) &&
- (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
- nic->flags |= wol_magic;
- device_set_wakeup_enable(&pdev->dev, true);
- }
-
- /* ack any pending wake events, disable PME */
- pci_pme_active(pdev, false);
-
- strcpy(netdev->name, "eth%d");
- if ((err = register_netdev(netdev))) {
- netif_err(nic, probe, nic->netdev, "Cannot register net device, aborting\n");
- goto err_out_free;
- }
- nic->cbs_pool = pci_pool_create(netdev->name,
- nic->pdev,
- nic->params.cbs.max * sizeof(struct cb),
- sizeof(u32),
- 0);
- netif_info(nic, probe, nic->netdev,
- "addr 0x%llx, irq %d, MAC addr %pM\n",
- (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
- pdev->irq, netdev->dev_addr);
-
- return 0;
-
-err_out_free:
- e100_free(nic);
-err_out_iounmap:
- pci_iounmap(pdev, nic->csr);
-err_out_free_res:
- pci_release_regions(pdev);
-err_out_disable_pdev:
- pci_disable_device(pdev);
-err_out_free_dev:
- pci_set_drvdata(pdev, NULL);
- free_netdev(netdev);
- return err;
-}
-
-static void __devexit e100_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
-
- if (netdev) {
- struct nic *nic = netdev_priv(netdev);
- unregister_netdev(netdev);
- e100_free(nic);
- pci_iounmap(pdev, nic->csr);
- pci_pool_destroy(nic->cbs_pool);
- free_netdev(netdev);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
- }
-}
-
-#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
-#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
-#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
-static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- if (netif_running(netdev))
- e100_down(nic);
- netif_device_detach(netdev);
-
- pci_save_state(pdev);
-
- if ((nic->flags & wol_magic) | e100_asf(nic)) {
- /* enable reverse auto-negotiation */
- if (nic->phy == phy_82552_v) {
- u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
- E100_82552_SMARTSPEED);
-
- mdio_write(netdev, nic->mii.phy_id,
- E100_82552_SMARTSPEED, smartspeed |
- E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
- }
- *enable_wake = true;
- } else {
- *enable_wake = false;
- }
-
- pci_disable_device(pdev);
-}
-
-static int __e100_power_off(struct pci_dev *pdev, bool wake)
-{
- if (wake)
- return pci_prepare_to_sleep(pdev);
-
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- bool wake;
- __e100_shutdown(pdev, &wake);
- return __e100_power_off(pdev, wake);
-}
-
-static int e100_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- /* ack any pending wake events, disable PME */
- pci_enable_wake(pdev, 0, 0);
-
- /* disable reverse auto-negotiation */
- if (nic->phy == phy_82552_v) {
- u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
- E100_82552_SMARTSPEED);
-
- mdio_write(netdev, nic->mii.phy_id,
- E100_82552_SMARTSPEED,
- smartspeed & ~(E100_82552_REV_ANEG));
- }
-
- netif_device_attach(netdev);
- if (netif_running(netdev))
- e100_up(nic);
-
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static void e100_shutdown(struct pci_dev *pdev)
-{
- bool wake;
- __e100_shutdown(pdev, &wake);
- if (system_state == SYSTEM_POWER_OFF)
- __e100_power_off(pdev, wake);
-}
-
-/* ------------------ PCI Error Recovery infrastructure -------------- */
-/**
- * e100_io_error_detected - called when PCI error is detected.
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- */
-static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- e100_down(nic);
- pci_disable_device(pdev);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * e100_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch.
- */
-static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- if (pci_enable_device(pdev)) {
- pr_err("Cannot re-enable PCI device after reset\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- pci_set_master(pdev);
-
- /* Only one device per card can do a reset */
- if (0 != PCI_FUNC(pdev->devfn))
- return PCI_ERS_RESULT_RECOVERED;
- e100_hw_reset(nic);
- e100_phy_init(nic);
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * e100_io_resume - resume normal operations
- * @pdev: Pointer to PCI device
- *
- * Resume normal operations after an error recovery
- * sequence has been completed.
- */
-static void e100_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct nic *nic = netdev_priv(netdev);
-
- /* ack any pending wake events, disable PME */
- pci_enable_wake(pdev, 0, 0);
-
- netif_device_attach(netdev);
- if (netif_running(netdev)) {
- e100_open(netdev);
- mod_timer(&nic->watchdog, jiffies);
- }
-}
-
-static struct pci_error_handlers e100_err_handler = {
- .error_detected = e100_io_error_detected,
- .slot_reset = e100_io_slot_reset,
- .resume = e100_io_resume,
-};
-
-static struct pci_driver e100_driver = {
- .name = DRV_NAME,
- .id_table = e100_id_table,
- .probe = e100_probe,
- .remove = __devexit_p(e100_remove),
-#ifdef CONFIG_PM
- /* Power Management hooks */
- .suspend = e100_suspend,
- .resume = e100_resume,
-#endif
- .shutdown = e100_shutdown,
- .err_handler = &e100_err_handler,
-};
-
-static int __init e100_init_module(void)
-{
- if (((1 << debug) - 1) & NETIF_MSG_DRV) {
- pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
- pr_info("%s\n", DRV_COPYRIGHT);
- }
- return pci_register_driver(&e100_driver);
-}
-
-static void __exit e100_cleanup_module(void)
-{
- pci_unregister_driver(&e100_driver);
-}
-
-module_init(e100_init_module);
-module_exit(e100_cleanup_module);
+++ /dev/null
-################################################################################
-#
-# Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2006 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# Linux NICS <linux.nics@intel.com>
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) PRO/1000 ethernet driver
-#
-
-obj-$(CONFIG_E1000) += e1000.o
-
-e1000-objs := e1000_main.o e1000_hw.o e1000_ethtool.o e1000_param.o
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/* Linux PRO/1000 Ethernet Driver main header file */
-
-#ifndef _E1000_H_
-#define _E1000_H_
-
-#include <linux/stddef.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pagemap.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/capability.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/ipv6.h>
-#include <linux/tcp.h>
-#include <linux/udp.h>
-#include <net/pkt_sched.h>
-#include <linux/list.h>
-#include <linux/reboot.h>
-#include <net/checksum.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-
-#define BAR_0 0
-#define BAR_1 1
-#define BAR_5 5
-
-#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
- PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
-
-struct e1000_adapter;
-
-#include "e1000_hw.h"
-
-#define E1000_MAX_INTR 10
-
-/* TX/RX descriptor defines */
-#define E1000_DEFAULT_TXD 256
-#define E1000_MAX_TXD 256
-#define E1000_MIN_TXD 48
-#define E1000_MAX_82544_TXD 4096
-
-#define E1000_DEFAULT_RXD 256
-#define E1000_MAX_RXD 256
-#define E1000_MIN_RXD 48
-#define E1000_MAX_82544_RXD 4096
-
-#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
-#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
-
-/* this is the size past which hardware will drop packets when setting LPE=0 */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
-
-/* Supported Rx Buffer Sizes */
-#define E1000_RXBUFFER_128 128 /* Used for packet split */
-#define E1000_RXBUFFER_256 256 /* Used for packet split */
-#define E1000_RXBUFFER_512 512
-#define E1000_RXBUFFER_1024 1024
-#define E1000_RXBUFFER_2048 2048
-#define E1000_RXBUFFER_4096 4096
-#define E1000_RXBUFFER_8192 8192
-#define E1000_RXBUFFER_16384 16384
-
-/* SmartSpeed delimiters */
-#define E1000_SMARTSPEED_DOWNSHIFT 3
-#define E1000_SMARTSPEED_MAX 15
-
-/* Packet Buffer allocations */
-#define E1000_PBA_BYTES_SHIFT 0xA
-#define E1000_TX_HEAD_ADDR_SHIFT 7
-#define E1000_PBA_TX_MASK 0xFFFF0000
-
-/* Flow Control Watermarks */
-#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
-#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
-
-#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
-
-/* How many Tx Descriptors do we need to call netif_wake_queue ? */
-#define E1000_TX_QUEUE_WAKE 16
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define AUTO_ALL_MODES 0
-#define E1000_EEPROM_82544_APM 0x0004
-#define E1000_EEPROM_APME 0x0400
-
-#ifndef E1000_MASTER_SLAVE
-/* Switch to override PHY master/slave setting */
-#define E1000_MASTER_SLAVE e1000_ms_hw_default
-#endif
-
-#define E1000_MNG_VLAN_NONE (-1)
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct e1000_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- struct page *page;
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- u16 mapped_as_page;
-};
-
-struct e1000_tx_ring {
- /* pointer to the descriptor ring memory */
- void *desc;
- /* physical address of the descriptor ring */
- dma_addr_t dma;
- /* length of descriptor ring in bytes */
- unsigned int size;
- /* number of descriptors in the ring */
- unsigned int count;
- /* next descriptor to associate a buffer with */
- unsigned int next_to_use;
- /* next descriptor to check for DD status bit */
- unsigned int next_to_clean;
- /* array of buffer information structs */
- struct e1000_buffer *buffer_info;
-
- u16 tdh;
- u16 tdt;
- bool last_tx_tso;
-};
-
-struct e1000_rx_ring {
- /* pointer to the descriptor ring memory */
- void *desc;
- /* physical address of the descriptor ring */
- dma_addr_t dma;
- /* length of descriptor ring in bytes */
- unsigned int size;
- /* number of descriptors in the ring */
- unsigned int count;
- /* next descriptor to associate a buffer with */
- unsigned int next_to_use;
- /* next descriptor to check for DD status bit */
- unsigned int next_to_clean;
- /* array of buffer information structs */
- struct e1000_buffer *buffer_info;
- struct sk_buff *rx_skb_top;
-
- /* cpu for rx queue */
- int cpu;
-
- u16 rdh;
- u16 rdt;
-};
-
-#define E1000_DESC_UNUSED(R) \
- ((((R)->next_to_clean > (R)->next_to_use) \
- ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
-
-#define E1000_RX_DESC_EXT(R, i) \
- (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
-#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
-#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
-#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
-#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
-
-/* board specific private data structure */
-
-struct e1000_adapter {
- struct timer_list tx_fifo_stall_timer;
- struct timer_list watchdog_timer;
- struct timer_list phy_info_timer;
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u16 mng_vlan_id;
- u32 bd_number;
- u32 rx_buffer_len;
- u32 wol;
- u32 smartspeed;
- u32 en_mng_pt;
- u16 link_speed;
- u16 link_duplex;
- spinlock_t stats_lock;
- unsigned int total_tx_bytes;
- unsigned int total_tx_packets;
- unsigned int total_rx_bytes;
- unsigned int total_rx_packets;
- /* Interrupt Throttle Rate */
- u32 itr;
- u32 itr_setting;
- u16 tx_itr;
- u16 rx_itr;
-
- struct work_struct reset_task;
- u8 fc_autoneg;
-
- /* TX */
- struct e1000_tx_ring *tx_ring; /* One per active queue */
- unsigned int restart_queue;
- u32 txd_cmd;
- u32 tx_int_delay;
- u32 tx_abs_int_delay;
- u32 gotcl;
- u64 gotcl_old;
- u64 tpt_old;
- u64 colc_old;
- u32 tx_timeout_count;
- u32 tx_fifo_head;
- u32 tx_head_addr;
- u32 tx_fifo_size;
- u8 tx_timeout_factor;
- atomic_t tx_fifo_stall;
- bool pcix_82544;
- bool detect_tx_hung;
-
- /* RX */
- bool (*clean_rx)(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
- void (*alloc_rx_buf)(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int cleaned_count);
- struct e1000_rx_ring *rx_ring; /* One per active queue */
- struct napi_struct napi;
-
- int num_tx_queues;
- int num_rx_queues;
-
- u64 hw_csum_err;
- u64 hw_csum_good;
- u32 alloc_rx_buff_failed;
- u32 rx_int_delay;
- u32 rx_abs_int_delay;
- bool rx_csum;
- u32 gorcl;
- u64 gorcl_old;
-
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- /* structs defined in e1000_hw.h */
- struct e1000_hw hw;
- struct e1000_hw_stats stats;
- struct e1000_phy_info phy_info;
- struct e1000_phy_stats phy_stats;
-
- u32 test_icr;
- struct e1000_tx_ring test_tx_ring;
- struct e1000_rx_ring test_rx_ring;
-
- int msg_enable;
-
- /* to not mess up cache alignment, always add to the bottom */
- bool tso_force;
- bool smart_power_down; /* phy smart power down */
- bool quad_port_a;
- unsigned long flags;
- u32 eeprom_wol;
-
- /* for ioport free */
- int bars;
- int need_ioport;
-
- bool discarding;
-
- struct work_struct fifo_stall_task;
- struct work_struct phy_info_task;
-};
-
-enum e1000_state_t {
- __E1000_TESTING,
- __E1000_RESETTING,
- __E1000_DOWN
-};
-
-#undef pr_fmt
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-extern struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
-#define e_dbg(format, arg...) \
- netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
-#define e_err(msglvl, format, arg...) \
- netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_info(msglvl, format, arg...) \
- netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_warn(msglvl, format, arg...) \
- netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_notice(msglvl, format, arg...) \
- netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_dev_info(format, arg...) \
- dev_info(&adapter->pdev->dev, format, ## arg)
-#define e_dev_warn(format, arg...) \
- dev_warn(&adapter->pdev->dev, format, ## arg)
-#define e_dev_err(format, arg...) \
- dev_err(&adapter->pdev->dev, format, ## arg)
-
-extern char e1000_driver_name[];
-extern const char e1000_driver_version[];
-
-extern int e1000_up(struct e1000_adapter *adapter);
-extern void e1000_down(struct e1000_adapter *adapter);
-extern void e1000_reinit_locked(struct e1000_adapter *adapter);
-extern void e1000_reset(struct e1000_adapter *adapter);
-extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
-extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
-extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
-extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
-extern void e1000_update_stats(struct e1000_adapter *adapter);
-extern bool e1000_has_link(struct e1000_adapter *adapter);
-extern void e1000_power_up_phy(struct e1000_adapter *);
-extern void e1000_set_ethtool_ops(struct net_device *netdev);
-extern void e1000_check_options(struct e1000_adapter *adapter);
-extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
-
-#endif /* _E1000_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for e1000 */
-
-#include "e1000.h"
-#include <asm/uaccess.h>
-
-enum {NETDEV_STATS, E1000_STATS};
-
-struct e1000_stats {
- char stat_string[ETH_GSTRING_LEN];
- int type;
- int sizeof_stat;
- int stat_offset;
-};
-
-#define E1000_STAT(m) E1000_STATS, \
- sizeof(((struct e1000_adapter *)0)->m), \
- offsetof(struct e1000_adapter, m)
-#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
- sizeof(((struct net_device *)0)->m), \
- offsetof(struct net_device, m)
-
-static const struct e1000_stats e1000_gstrings_stats[] = {
- { "rx_packets", E1000_STAT(stats.gprc) },
- { "tx_packets", E1000_STAT(stats.gptc) },
- { "rx_bytes", E1000_STAT(stats.gorcl) },
- { "tx_bytes", E1000_STAT(stats.gotcl) },
- { "rx_broadcast", E1000_STAT(stats.bprc) },
- { "tx_broadcast", E1000_STAT(stats.bptc) },
- { "rx_multicast", E1000_STAT(stats.mprc) },
- { "tx_multicast", E1000_STAT(stats.mptc) },
- { "rx_errors", E1000_STAT(stats.rxerrc) },
- { "tx_errors", E1000_STAT(stats.txerrc) },
- { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
- { "multicast", E1000_STAT(stats.mprc) },
- { "collisions", E1000_STAT(stats.colc) },
- { "rx_length_errors", E1000_STAT(stats.rlerrc) },
- { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
- { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
- { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
- { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
- { "rx_missed_errors", E1000_STAT(stats.mpc) },
- { "tx_aborted_errors", E1000_STAT(stats.ecol) },
- { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
- { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
- { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
- { "tx_window_errors", E1000_STAT(stats.latecol) },
- { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
- { "tx_deferred_ok", E1000_STAT(stats.dc) },
- { "tx_single_coll_ok", E1000_STAT(stats.scc) },
- { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
- { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
- { "tx_restart_queue", E1000_STAT(restart_queue) },
- { "rx_long_length_errors", E1000_STAT(stats.roc) },
- { "rx_short_length_errors", E1000_STAT(stats.ruc) },
- { "rx_align_errors", E1000_STAT(stats.algnerrc) },
- { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
- { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
- { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
- { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
- { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
- { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
- { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
- { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
- { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
- { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
- { "tx_smbus", E1000_STAT(stats.mgptc) },
- { "rx_smbus", E1000_STAT(stats.mgprc) },
- { "dropped_smbus", E1000_STAT(stats.mgpdc) },
-};
-
-#define E1000_QUEUE_STATS_LEN 0
-#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
-#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
-static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
- "Register test (offline)", "Eeprom test (offline)",
- "Interrupt test (offline)", "Loopback test (offline)",
- "Link test (on/offline)"
-};
-#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
-
-static int e1000_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if (hw->media_type == e1000_media_type_copper) {
-
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full|
- SUPPORTED_Autoneg |
- SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
-
- if (hw->autoneg == 1) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- /* the e1000 autoneg seems to match ethtool nicely */
- ecmd->advertising |= hw->autoneg_advertised;
- }
-
- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy_addr;
-
- if (hw->mac_type == e1000_82543)
- ecmd->transceiver = XCVR_EXTERNAL;
- else
- ecmd->transceiver = XCVR_INTERNAL;
-
- } else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
-
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg);
-
- ecmd->port = PORT_FIBRE;
-
- if (hw->mac_type >= e1000_82545)
- ecmd->transceiver = XCVR_INTERNAL;
- else
- ecmd->transceiver = XCVR_EXTERNAL;
- }
-
- if (er32(STATUS) & E1000_STATUS_LU) {
-
- e1000_get_speed_and_duplex(hw, &adapter->link_speed,
- &adapter->link_duplex);
- ethtool_cmd_speed_set(ecmd, adapter->link_speed);
-
- /* unfortunately FULL_DUPLEX != DUPLEX_FULL
- * and HALF_DUPLEX != DUPLEX_HALF */
-
- if (adapter->link_duplex == FULL_DUPLEX)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
- hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
- return 0;
-}
-
-static int e1000_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
-
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- hw->autoneg = 1;
- if (hw->media_type == e1000_media_type_fiber)
- hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
- else
- hw->autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
- ecmd->advertising = hw->autoneg_advertised;
- } else {
- u32 speed = ethtool_cmd_speed(ecmd);
- if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
- clear_bit(__E1000_RESETTING, &adapter->flags);
- return -EINVAL;
- }
- }
-
- /* reset the link */
-
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
- e1000_reset(adapter);
-
- clear_bit(__E1000_RESETTING, &adapter->flags);
- return 0;
-}
-
-static u32 e1000_get_link(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- /*
- * If the link is not reported up to netdev, interrupts are disabled,
- * and so the physical link state may have changed since we last
- * looked. Set get_link_status to make sure that the true link
- * state is interrogated, rather than pulling a cached and possibly
- * stale link state from the driver.
- */
- if (!netif_carrier_ok(netdev))
- adapter->hw.get_link_status = 1;
-
- return e1000_has_link(adapter);
-}
-
-static void e1000_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-
- if (hw->fc == E1000_FC_RX_PAUSE)
- pause->rx_pause = 1;
- else if (hw->fc == E1000_FC_TX_PAUSE)
- pause->tx_pause = 1;
- else if (hw->fc == E1000_FC_FULL) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
- }
-}
-
-static int e1000_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int retval = 0;
-
- adapter->fc_autoneg = pause->autoneg;
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
-
- if (pause->rx_pause && pause->tx_pause)
- hw->fc = E1000_FC_FULL;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc = E1000_FC_RX_PAUSE;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc = E1000_FC_TX_PAUSE;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc = E1000_FC_NONE;
-
- hw->original_fc = hw->fc;
-
- if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- if (netif_running(adapter->netdev)) {
- e1000_down(adapter);
- e1000_up(adapter);
- } else
- e1000_reset(adapter);
- } else
- retval = ((hw->media_type == e1000_media_type_fiber) ?
- e1000_setup_link(hw) : e1000_force_mac_fc(hw));
-
- clear_bit(__E1000_RESETTING, &adapter->flags);
- return retval;
-}
-
-static u32 e1000_get_msglevel(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void e1000_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-static int e1000_get_regs_len(struct net_device *netdev)
-{
-#define E1000_REGS_LEN 32
- return E1000_REGS_LEN * sizeof(u32);
-}
-
-static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
- void *p)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
- u16 phy_data;
-
- memset(p, 0, E1000_REGS_LEN * sizeof(u32));
-
- regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
-
- regs_buff[0] = er32(CTRL);
- regs_buff[1] = er32(STATUS);
-
- regs_buff[2] = er32(RCTL);
- regs_buff[3] = er32(RDLEN);
- regs_buff[4] = er32(RDH);
- regs_buff[5] = er32(RDT);
- regs_buff[6] = er32(RDTR);
-
- regs_buff[7] = er32(TCTL);
- regs_buff[8] = er32(TDLEN);
- regs_buff[9] = er32(TDH);
- regs_buff[10] = er32(TDT);
- regs_buff[11] = er32(TIDV);
-
- regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
- if (hw->phy_type == e1000_phy_igp) {
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
- IGP01E1000_PHY_AGC_A);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[13] = (u32)phy_data; /* cable length */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
- IGP01E1000_PHY_AGC_B);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[14] = (u32)phy_data; /* cable length */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
- IGP01E1000_PHY_AGC_C);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[15] = (u32)phy_data; /* cable length */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
- IGP01E1000_PHY_AGC_D);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[16] = (u32)phy_data; /* cable length */
- regs_buff[17] = 0; /* extended 10bt distance (not needed) */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[18] = (u32)phy_data; /* cable polarity */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
- IGP01E1000_PHY_PCS_INIT_REG);
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
- IGP01E1000_PHY_PAGE_SELECT, &phy_data);
- regs_buff[19] = (u32)phy_data; /* cable polarity */
- regs_buff[20] = 0; /* polarity correction enabled (always) */
- regs_buff[22] = 0; /* phy receive errors (unavailable) */
- regs_buff[23] = regs_buff[18]; /* mdix mode */
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
- } else {
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- regs_buff[13] = (u32)phy_data; /* cable length */
- regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
- regs_buff[18] = regs_buff[13]; /* cable polarity */
- regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[20] = regs_buff[17]; /* polarity correction */
- /* phy receive errors */
- regs_buff[22] = adapter->phy_stats.receive_errors;
- regs_buff[23] = regs_buff[13]; /* mdix mode */
- }
- regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
- e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- regs_buff[24] = (u32)phy_data; /* phy local receiver status */
- regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
- if (hw->mac_type >= e1000_82540 &&
- hw->media_type == e1000_media_type_copper) {
- regs_buff[26] = er32(MANC);
- }
-}
-
-static int e1000_get_eeprom_len(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- return hw->eeprom.word_size * 2;
-}
-
-static int e1000_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- int first_word, last_word;
- int ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- eeprom->magic = hw->vendor_id | (hw->device_id << 16);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-
- eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- if (hw->eeprom.type == e1000_eeprom_spi)
- ret_val = e1000_read_eeprom(hw, first_word,
- last_word - first_word + 1,
- eeprom_buff);
- else {
- for (i = 0; i < last_word - first_word + 1; i++) {
- ret_val = e1000_read_eeprom(hw, first_word + i, 1,
- &eeprom_buff[i]);
- if (ret_val)
- break;
- }
- }
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
- eeprom->len);
- kfree(eeprom_buff);
-
- return ret_val;
-}
-
-static int e1000_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- void *ptr;
- int max_len, first_word, last_word, ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EOPNOTSUPP;
-
- if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
- return -EFAULT;
-
- max_len = hw->eeprom.word_size * 2;
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ptr = (void *)eeprom_buff;
-
- if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
- ret_val = e1000_read_eeprom(hw, first_word, 1,
- &eeprom_buff[0]);
- ptr++;
- }
- if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
- ret_val = e1000_read_eeprom(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
- }
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(ptr, bytes, eeprom->len);
-
- for (i = 0; i < last_word - first_word + 1; i++)
- eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
-
- ret_val = e1000_write_eeprom(hw, first_word,
- last_word - first_word + 1, eeprom_buff);
-
- /* Update the checksum over the first part of the EEPROM if needed */
- if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
- e1000_update_eeprom_checksum(hw);
-
- kfree(eeprom_buff);
- return ret_val;
-}
-
-static void e1000_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32];
-
- strncpy(drvinfo->driver, e1000_driver_name, 32);
- strncpy(drvinfo->version, e1000_driver_version, 32);
-
- sprintf(firmware_version, "N/A");
- strncpy(drvinfo->fw_version, firmware_version, 32);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
- drvinfo->regdump_len = e1000_get_regs_len(netdev);
- drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
-}
-
-static void e1000_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- e1000_mac_type mac_type = hw->mac_type;
- struct e1000_tx_ring *txdr = adapter->tx_ring;
- struct e1000_rx_ring *rxdr = adapter->rx_ring;
-
- ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
- E1000_MAX_82544_RXD;
- ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
- E1000_MAX_82544_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rxdr->count;
- ring->tx_pending = txdr->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int e1000_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- e1000_mac_type mac_type = hw->mac_type;
- struct e1000_tx_ring *txdr, *tx_old;
- struct e1000_rx_ring *rxdr, *rx_old;
- int i, err;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
-
- if (netif_running(adapter->netdev))
- e1000_down(adapter);
-
- tx_old = adapter->tx_ring;
- rx_old = adapter->rx_ring;
-
- err = -ENOMEM;
- txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
- if (!txdr)
- goto err_alloc_tx;
-
- rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
- if (!rxdr)
- goto err_alloc_rx;
-
- adapter->tx_ring = txdr;
- adapter->rx_ring = rxdr;
-
- rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
- rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
- E1000_MAX_RXD : E1000_MAX_82544_RXD));
- rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
-
- txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
- txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
- E1000_MAX_TXD : E1000_MAX_82544_TXD));
- txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- txdr[i].count = txdr->count;
- for (i = 0; i < adapter->num_rx_queues; i++)
- rxdr[i].count = rxdr->count;
-
- if (netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
- err = e1000_setup_all_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
- err = e1000_setup_all_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
-
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- e1000_free_all_rx_resources(adapter);
- e1000_free_all_tx_resources(adapter);
- kfree(tx_old);
- kfree(rx_old);
- adapter->rx_ring = rxdr;
- adapter->tx_ring = txdr;
- err = e1000_up(adapter);
- if (err)
- goto err_setup;
- }
-
- clear_bit(__E1000_RESETTING, &adapter->flags);
- return 0;
-err_setup_tx:
- e1000_free_all_rx_resources(adapter);
-err_setup_rx:
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- kfree(rxdr);
-err_alloc_rx:
- kfree(txdr);
-err_alloc_tx:
- e1000_up(adapter);
-err_setup:
- clear_bit(__E1000_RESETTING, &adapter->flags);
- return err;
-}
-
-static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
- u32 mask, u32 write)
-{
- struct e1000_hw *hw = &adapter->hw;
- static const u32 test[] =
- {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- u8 __iomem *address = hw->hw_addr + reg;
- u32 read;
- int i;
-
- for (i = 0; i < ARRAY_SIZE(test); i++) {
- writel(write & test[i], address);
- read = readl(address);
- if (read != (write & test[i] & mask)) {
- e_err(drv, "pattern test reg %04X failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, read, (write & test[i] & mask));
- *data = reg;
- return true;
- }
- }
- return false;
-}
-
-static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
- u32 mask, u32 write)
-{
- struct e1000_hw *hw = &adapter->hw;
- u8 __iomem *address = hw->hw_addr + reg;
- u32 read;
-
- writel(write & mask, address);
- read = readl(address);
- if ((read & mask) != (write & mask)) {
- e_err(drv, "set/check reg %04X test failed: "
- "got 0x%08X expected 0x%08X\n",
- reg, (read & mask), (write & mask));
- *data = reg;
- return true;
- }
- return false;
-}
-
-#define REG_PATTERN_TEST(reg, mask, write) \
- do { \
- if (reg_pattern_test(adapter, data, \
- (hw->mac_type >= e1000_82543) \
- ? E1000_##reg : E1000_82542_##reg, \
- mask, write)) \
- return 1; \
- } while (0)
-
-#define REG_SET_AND_CHECK(reg, mask, write) \
- do { \
- if (reg_set_and_check(adapter, data, \
- (hw->mac_type >= e1000_82543) \
- ? E1000_##reg : E1000_82542_##reg, \
- mask, write)) \
- return 1; \
- } while (0)
-
-static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
-{
- u32 value, before, after;
- u32 i, toggle;
- struct e1000_hw *hw = &adapter->hw;
-
- /* The status register is Read Only, so a write should fail.
- * Some bits that get toggled are ignored.
- */
-
- /* there are several bits on newer hardware that are r/w */
- toggle = 0xFFFFF833;
-
- before = er32(STATUS);
- value = (er32(STATUS) & toggle);
- ew32(STATUS, toggle);
- after = er32(STATUS) & toggle;
- if (value != after) {
- e_err(drv, "failed STATUS register test got: "
- "0x%08X expected: 0x%08X\n", after, value);
- *data = 1;
- return 1;
- }
- /* restore previous status */
- ew32(STATUS, before);
-
- REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
-
- REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
- REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
- REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
- REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
-
- REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
-
- before = 0x06DFB3FE;
- REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
- REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
-
- if (hw->mac_type >= e1000_82543) {
-
- REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
- REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
- value = E1000_RAR_ENTRIES;
- for (i = 0; i < value; i++) {
- REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
- 0xFFFFFFFF);
- }
-
- } else {
-
- REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
- REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
- REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
-
- }
-
- value = E1000_MC_TBL_SIZE;
- for (i = 0; i < value; i++)
- REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
-
- *data = 0;
- return 0;
-}
-
-static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 temp;
- u16 checksum = 0;
- u16 i;
-
- *data = 0;
- /* Read and add up the contents of the EEPROM */
- for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
- if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
- *data = 1;
- break;
- }
- checksum += temp;
- }
-
- /* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16)EEPROM_SUM) && !(*data))
- *data = 2;
-
- return *data;
-}
-
-static irqreturn_t e1000_test_intr(int irq, void *data)
-{
- struct net_device *netdev = (struct net_device *)data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->test_icr |= er32(ICR);
-
- return IRQ_HANDLED;
-}
-
-static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct net_device *netdev = adapter->netdev;
- u32 mask, i = 0;
- bool shared_int = true;
- u32 irq = adapter->pdev->irq;
- struct e1000_hw *hw = &adapter->hw;
-
- *data = 0;
-
- /* NOTE: we don't test MSI interrupts here, yet */
- /* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
- netdev))
- shared_int = false;
- else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
- *data = 1;
- return -1;
- }
- e_info(hw, "testing %s interrupt\n", (shared_int ?
- "shared" : "unshared"));
-
- /* Disable all the interrupts */
- ew32(IMC, 0xFFFFFFFF);
- E1000_WRITE_FLUSH();
- msleep(10);
-
- /* Test each interrupt */
- for (; i < 10; i++) {
-
- /* Interrupt to test */
- mask = 1 << i;
-
- if (!shared_int) {
- /* Disable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMC, mask);
- ew32(ICS, mask);
- E1000_WRITE_FLUSH();
- msleep(10);
-
- if (adapter->test_icr & mask) {
- *data = 3;
- break;
- }
- }
-
- /* Enable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was not posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMS, mask);
- ew32(ICS, mask);
- E1000_WRITE_FLUSH();
- msleep(10);
-
- if (!(adapter->test_icr & mask)) {
- *data = 4;
- break;
- }
-
- if (!shared_int) {
- /* Disable the other interrupts to be reported in
- * the cause register and then force the other
- * interrupts and see if any get posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMC, ~mask & 0x00007FFF);
- ew32(ICS, ~mask & 0x00007FFF);
- E1000_WRITE_FLUSH();
- msleep(10);
-
- if (adapter->test_icr) {
- *data = 5;
- break;
- }
- }
- }
-
- /* Disable all the interrupts */
- ew32(IMC, 0xFFFFFFFF);
- E1000_WRITE_FLUSH();
- msleep(10);
-
- /* Unhook test interrupt handler */
- free_irq(irq, netdev);
-
- return *data;
-}
-
-static void e1000_free_desc_rings(struct e1000_adapter *adapter)
-{
- struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
- struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int i;
-
- if (txdr->desc && txdr->buffer_info) {
- for (i = 0; i < txdr->count; i++) {
- if (txdr->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- txdr->buffer_info[i].dma,
- txdr->buffer_info[i].length,
- DMA_TO_DEVICE);
- if (txdr->buffer_info[i].skb)
- dev_kfree_skb(txdr->buffer_info[i].skb);
- }
- }
-
- if (rxdr->desc && rxdr->buffer_info) {
- for (i = 0; i < rxdr->count; i++) {
- if (rxdr->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- rxdr->buffer_info[i].dma,
- rxdr->buffer_info[i].length,
- DMA_FROM_DEVICE);
- if (rxdr->buffer_info[i].skb)
- dev_kfree_skb(rxdr->buffer_info[i].skb);
- }
- }
-
- if (txdr->desc) {
- dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
- txdr->dma);
- txdr->desc = NULL;
- }
- if (rxdr->desc) {
- dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
- rxdr->dma);
- rxdr->desc = NULL;
- }
-
- kfree(txdr->buffer_info);
- txdr->buffer_info = NULL;
- kfree(rxdr->buffer_info);
- rxdr->buffer_info = NULL;
-}
-
-static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
- struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- u32 rctl;
- int i, ret_val;
-
- /* Setup Tx descriptor ring and Tx buffers */
-
- if (!txdr->count)
- txdr->count = E1000_DEFAULT_TXD;
-
- txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
- GFP_KERNEL);
- if (!txdr->buffer_info) {
- ret_val = 1;
- goto err_nomem;
- }
-
- txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
- txdr->size = ALIGN(txdr->size, 4096);
- txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
- GFP_KERNEL);
- if (!txdr->desc) {
- ret_val = 2;
- goto err_nomem;
- }
- memset(txdr->desc, 0, txdr->size);
- txdr->next_to_use = txdr->next_to_clean = 0;
-
- ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
- ew32(TDBAH, ((u64)txdr->dma >> 32));
- ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
- ew32(TDH, 0);
- ew32(TDT, 0);
- ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
- E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
- E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
-
- for (i = 0; i < txdr->count; i++) {
- struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
- struct sk_buff *skb;
- unsigned int size = 1024;
-
- skb = alloc_skb(size, GFP_KERNEL);
- if (!skb) {
- ret_val = 3;
- goto err_nomem;
- }
- skb_put(skb, size);
- txdr->buffer_info[i].skb = skb;
- txdr->buffer_info[i].length = skb->len;
- txdr->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
- tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
- tx_desc->lower.data = cpu_to_le32(skb->len);
- tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
- E1000_TXD_CMD_IFCS |
- E1000_TXD_CMD_RPS);
- tx_desc->upper.data = 0;
- }
-
- /* Setup Rx descriptor ring and Rx buffers */
-
- if (!rxdr->count)
- rxdr->count = E1000_DEFAULT_RXD;
-
- rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
- GFP_KERNEL);
- if (!rxdr->buffer_info) {
- ret_val = 4;
- goto err_nomem;
- }
-
- rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
- GFP_KERNEL);
- if (!rxdr->desc) {
- ret_val = 5;
- goto err_nomem;
- }
- memset(rxdr->desc, 0, rxdr->size);
- rxdr->next_to_use = rxdr->next_to_clean = 0;
-
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
- ew32(RDBAH, ((u64)rxdr->dma >> 32));
- ew32(RDLEN, rxdr->size);
- ew32(RDH, 0);
- ew32(RDT, 0);
- rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
- ew32(RCTL, rctl);
-
- for (i = 0; i < rxdr->count; i++) {
- struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
- struct sk_buff *skb;
-
- skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
- if (!skb) {
- ret_val = 6;
- goto err_nomem;
- }
- skb_reserve(skb, NET_IP_ALIGN);
- rxdr->buffer_info[i].skb = skb;
- rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
- rxdr->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data,
- E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
- rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
- memset(skb->data, 0x00, skb->len);
- }
-
- return 0;
-
-err_nomem:
- e1000_free_desc_rings(adapter);
- return ret_val;
-}
-
-static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* Write out to PHY registers 29 and 30 to disable the Receiver. */
- e1000_write_phy_reg(hw, 29, 0x001F);
- e1000_write_phy_reg(hw, 30, 0x8FFC);
- e1000_write_phy_reg(hw, 29, 0x001A);
- e1000_write_phy_reg(hw, 30, 0x8FF0);
-}
-
-static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 phy_reg;
-
- /* Because we reset the PHY above, we need to re-force TX_CLK in the
- * Extended PHY Specific Control Register to 25MHz clock. This
- * value defaults back to a 2.5MHz clock when the PHY is reset.
- */
- e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
- phy_reg |= M88E1000_EPSCR_TX_CLK_25;
- e1000_write_phy_reg(hw,
- M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
-
- /* In addition, because of the s/w reset above, we need to enable
- * CRS on TX. This must be set for both full and half duplex
- * operation.
- */
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
- phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- e1000_write_phy_reg(hw,
- M88E1000_PHY_SPEC_CTRL, phy_reg);
-}
-
-static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_reg;
- u16 phy_reg;
-
- /* Setup the Device Control Register for PHY loopback test. */
-
- ctrl_reg = er32(CTRL);
- ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
- E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
-
- ew32(CTRL, ctrl_reg);
-
- /* Read the PHY Specific Control Register (0x10) */
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
-
- /* Clear Auto-Crossover bits in PHY Specific Control Register
- * (bits 6:5).
- */
- phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
- e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
-
- /* Perform software reset on the PHY */
- e1000_phy_reset(hw);
-
- /* Have to setup TX_CLK and TX_CRS after software reset */
- e1000_phy_reset_clk_and_crs(adapter);
-
- e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
-
- /* Wait for reset to complete. */
- udelay(500);
-
- /* Have to setup TX_CLK and TX_CRS after software reset */
- e1000_phy_reset_clk_and_crs(adapter);
-
- /* Write out to PHY registers 29 and 30 to disable the Receiver. */
- e1000_phy_disable_receiver(adapter);
-
- /* Set the loopback bit in the PHY control register. */
- e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
- phy_reg |= MII_CR_LOOPBACK;
- e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
-
- /* Setup TX_CLK and TX_CRS one more time. */
- e1000_phy_reset_clk_and_crs(adapter);
-
- /* Check Phy Configuration */
- e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
- if (phy_reg != 0x4100)
- return 9;
-
- e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
- if (phy_reg != 0x0070)
- return 10;
-
- e1000_read_phy_reg(hw, 29, &phy_reg);
- if (phy_reg != 0x001A)
- return 11;
-
- return 0;
-}
-
-static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_reg = 0;
- u32 stat_reg = 0;
-
- hw->autoneg = false;
-
- if (hw->phy_type == e1000_phy_m88) {
- /* Auto-MDI/MDIX Off */
- e1000_write_phy_reg(hw,
- M88E1000_PHY_SPEC_CTRL, 0x0808);
- /* reset to update Auto-MDI/MDIX */
- e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
- /* autoneg off */
- e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
- }
-
- ctrl_reg = er32(CTRL);
-
- /* force 1000, set loopback */
- e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
-
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
-
- if (hw->media_type == e1000_media_type_copper &&
- hw->phy_type == e1000_phy_m88)
- ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
- else {
- /* Set the ILOS bit on the fiber Nic is half
- * duplex link is detected. */
- stat_reg = er32(STATUS);
- if ((stat_reg & E1000_STATUS_FD) == 0)
- ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
- }
-
- ew32(CTRL, ctrl_reg);
-
- /* Disable the receiver on the PHY so when a cable is plugged in, the
- * PHY does not begin to autoneg when a cable is reconnected to the NIC.
- */
- if (hw->phy_type == e1000_phy_m88)
- e1000_phy_disable_receiver(adapter);
-
- udelay(500);
-
- return 0;
-}
-
-static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 phy_reg = 0;
- u16 count = 0;
-
- switch (hw->mac_type) {
- case e1000_82543:
- if (hw->media_type == e1000_media_type_copper) {
- /* Attempt to setup Loopback mode on Non-integrated PHY.
- * Some PHY registers get corrupted at random, so
- * attempt this 10 times.
- */
- while (e1000_nonintegrated_phy_loopback(adapter) &&
- count++ < 10);
- if (count < 11)
- return 0;
- }
- break;
-
- case e1000_82544:
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_82546_rev_3:
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- return e1000_integrated_phy_loopback(adapter);
- break;
- default:
- /* Default PHY loopback work is to read the MII
- * control register and assert bit 14 (loopback mode).
- */
- e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
- phy_reg |= MII_CR_LOOPBACK;
- e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
- return 0;
- break;
- }
-
- return 8;
-}
-
-static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
- switch (hw->mac_type) {
- case e1000_82545:
- case e1000_82546:
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- return e1000_set_phy_loopback(adapter);
- break;
- default:
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_LBM_TCVR;
- ew32(RCTL, rctl);
- return 0;
- }
- } else if (hw->media_type == e1000_media_type_copper)
- return e1000_set_phy_loopback(adapter);
-
- return 7;
-}
-
-static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
- u16 phy_reg;
-
- rctl = er32(RCTL);
- rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
- ew32(RCTL, rctl);
-
- switch (hw->mac_type) {
- case e1000_82545:
- case e1000_82546:
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- default:
- hw->autoneg = true;
- e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
- if (phy_reg & MII_CR_LOOPBACK) {
- phy_reg &= ~MII_CR_LOOPBACK;
- e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
- e1000_phy_reset(hw);
- }
- break;
- }
-}
-
-static void e1000_create_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- memset(skb->data, 0xFF, frame_size);
- frame_size &= ~1;
- memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
- memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
- memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
-}
-
-static int e1000_check_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- frame_size &= ~1;
- if (*(skb->data + 3) == 0xFF) {
- if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
- return 0;
- }
- }
- return 13;
-}
-
-static int e1000_run_loopback_test(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
- struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int i, j, k, l, lc, good_cnt, ret_val=0;
- unsigned long time;
-
- ew32(RDT, rxdr->count - 1);
-
- /* Calculate the loop count based on the largest descriptor ring
- * The idea is to wrap the largest ring a number of times using 64
- * send/receive pairs during each loop
- */
-
- if (rxdr->count <= txdr->count)
- lc = ((txdr->count / 64) * 2) + 1;
- else
- lc = ((rxdr->count / 64) * 2) + 1;
-
- k = l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
- 1024);
- dma_sync_single_for_device(&pdev->dev,
- txdr->buffer_info[k].dma,
- txdr->buffer_info[k].length,
- DMA_TO_DEVICE);
- if (unlikely(++k == txdr->count)) k = 0;
- }
- ew32(TDT, k);
- E1000_WRITE_FLUSH();
- msleep(200);
- time = jiffies; /* set the start time for the receive */
- good_cnt = 0;
- do { /* receive the sent packets */
- dma_sync_single_for_cpu(&pdev->dev,
- rxdr->buffer_info[l].dma,
- rxdr->buffer_info[l].length,
- DMA_FROM_DEVICE);
-
- ret_val = e1000_check_lbtest_frame(
- rxdr->buffer_info[l].skb,
- 1024);
- if (!ret_val)
- good_cnt++;
- if (unlikely(++l == rxdr->count)) l = 0;
- /* time + 20 msecs (200 msecs on 2.4) is more than
- * enough time to complete the receives, if it's
- * exceeded, break and error off
- */
- } while (good_cnt < 64 && jiffies < (time + 20));
- if (good_cnt != 64) {
- ret_val = 13; /* ret_val is the same as mis-compare */
- break;
- }
- if (jiffies >= (time + 2)) {
- ret_val = 14; /* error code for time out error */
- break;
- }
- } /* end loop count loop */
- return ret_val;
-}
-
-static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
-{
- *data = e1000_setup_desc_rings(adapter);
- if (*data)
- goto out;
- *data = e1000_setup_loopback_test(adapter);
- if (*data)
- goto err_loopback;
- *data = e1000_run_loopback_test(adapter);
- e1000_loopback_cleanup(adapter);
-
-err_loopback:
- e1000_free_desc_rings(adapter);
-out:
- return *data;
-}
-
-static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- *data = 0;
- if (hw->media_type == e1000_media_type_internal_serdes) {
- int i = 0;
- hw->serdes_has_link = false;
-
- /* On some blade server designs, link establishment
- * could take as long as 2-3 minutes */
- do {
- e1000_check_for_link(hw);
- if (hw->serdes_has_link)
- return *data;
- msleep(20);
- } while (i++ < 3750);
-
- *data = 1;
- } else {
- e1000_check_for_link(hw);
- if (hw->autoneg) /* if auto_neg is set wait for it */
- msleep(4000);
-
- if (!(er32(STATUS) & E1000_STATUS_LU)) {
- *data = 1;
- }
- }
- return *data;
-}
-
-static int e1000_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_TEST:
- return E1000_TEST_LEN;
- case ETH_SS_STATS:
- return E1000_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void e1000_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- bool if_running = netif_running(netdev);
-
- set_bit(__E1000_TESTING, &adapter->flags);
- if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- /* save speed, duplex, autoneg settings */
- u16 autoneg_advertised = hw->autoneg_advertised;
- u8 forced_speed_duplex = hw->forced_speed_duplex;
- u8 autoneg = hw->autoneg;
-
- e_info(hw, "offline testing starting\n");
-
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
- if (e1000_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- if (if_running)
- /* indicate we're in test mode */
- dev_close(netdev);
- else
- e1000_reset(adapter);
-
- if (e1000_reg_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000_reset(adapter);
- if (e1000_eeprom_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000_reset(adapter);
- if (e1000_intr_test(adapter, &data[2]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000_reset(adapter);
- /* make sure the phy is powered up */
- e1000_power_up_phy(adapter);
- if (e1000_loopback_test(adapter, &data[3]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* restore speed, duplex, autoneg settings */
- hw->autoneg_advertised = autoneg_advertised;
- hw->forced_speed_duplex = forced_speed_duplex;
- hw->autoneg = autoneg;
-
- e1000_reset(adapter);
- clear_bit(__E1000_TESTING, &adapter->flags);
- if (if_running)
- dev_open(netdev);
- } else {
- e_info(hw, "online testing starting\n");
- /* Online tests */
- if (e1000_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* Online tests aren't run; pass by default */
- data[0] = 0;
- data[1] = 0;
- data[2] = 0;
- data[3] = 0;
-
- clear_bit(__E1000_TESTING, &adapter->flags);
- }
- msleep_interruptible(4 * 1000);
-}
-
-static int e1000_wol_exclusion(struct e1000_adapter *adapter,
- struct ethtool_wolinfo *wol)
-{
- struct e1000_hw *hw = &adapter->hw;
- int retval = 1; /* fail by default */
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82542:
- case E1000_DEV_ID_82543GC_FIBER:
- case E1000_DEV_ID_82543GC_COPPER:
- case E1000_DEV_ID_82544EI_FIBER:
- case E1000_DEV_ID_82546EB_QUAD_COPPER:
- case E1000_DEV_ID_82545EM_FIBER:
- case E1000_DEV_ID_82545EM_COPPER:
- case E1000_DEV_ID_82546GB_QUAD_COPPER:
- case E1000_DEV_ID_82546GB_PCIE:
- /* these don't support WoL at all */
- wol->supported = 0;
- break;
- case E1000_DEV_ID_82546EB_FIBER:
- case E1000_DEV_ID_82546GB_FIBER:
- /* Wake events not supported on port B */
- if (er32(STATUS) & E1000_STATUS_FUNC_1) {
- wol->supported = 0;
- break;
- }
- /* return success for non excluded adapter ports */
- retval = 0;
- break;
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* quad port adapters only support WoL on port A */
- if (!adapter->quad_port_a) {
- wol->supported = 0;
- break;
- }
- /* return success for non excluded adapter ports */
- retval = 0;
- break;
- default:
- /* dual port cards only support WoL on port A from now on
- * unless it was enabled in the eeprom for port B
- * so exclude FUNC_1 ports from having WoL enabled */
- if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
- !adapter->eeprom_wol) {
- wol->supported = 0;
- break;
- }
-
- retval = 0;
- }
-
- return retval;
-}
-
-static void e1000_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC;
- wol->wolopts = 0;
-
- /* this function will set ->supported = 0 and return 1 if wol is not
- * supported by this hardware */
- if (e1000_wol_exclusion(adapter, wol) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return;
-
- /* apply any specific unsupported masks here */
- switch (hw->device_id) {
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* KSP3 does not suppport UCAST wake-ups */
- wol->supported &= ~WAKE_UCAST;
-
- if (adapter->wol & E1000_WUFC_EX)
- e_err(drv, "Interface does not support directed "
- "(unicast) frame wake-up packets\n");
- break;
- default:
- break;
- }
-
- if (adapter->wol & E1000_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & E1000_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & E1000_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & E1000_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
-}
-
-static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
-
- if (e1000_wol_exclusion(adapter, wol) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return wol->wolopts ? -EOPNOTSUPP : 0;
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- if (wol->wolopts & WAKE_UCAST) {
- e_err(drv, "Interface does not support directed "
- "(unicast) frame wake-up packets\n");
- return -EOPNOTSUPP;
- }
- break;
- default:
- break;
- }
-
- /* these settings will always override what we currently have */
- adapter->wol = 0;
-
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= E1000_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= E1000_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= E1000_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= E1000_WUFC_MAG;
-
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- return 0;
-}
-
-static int e1000_set_phys_id(struct net_device *netdev,
- enum ethtool_phys_id_state state)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- e1000_setup_led(hw);
- return 2;
-
- case ETHTOOL_ID_ON:
- e1000_led_on(hw);
- break;
-
- case ETHTOOL_ID_OFF:
- e1000_led_off(hw);
- break;
-
- case ETHTOOL_ID_INACTIVE:
- e1000_cleanup_led(hw);
- }
-
- return 0;
-}
-
-static int e1000_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->hw.mac_type < e1000_82545)
- return -EOPNOTSUPP;
-
- if (adapter->itr_setting <= 4)
- ec->rx_coalesce_usecs = adapter->itr_setting;
- else
- ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
-
- return 0;
-}
-
-static int e1000_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if (hw->mac_type < e1000_82545)
- return -EOPNOTSUPP;
-
- if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 4) &&
- (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- if (ec->rx_coalesce_usecs == 4) {
- adapter->itr = adapter->itr_setting = 4;
- } else if (ec->rx_coalesce_usecs <= 3) {
- adapter->itr = 20000;
- adapter->itr_setting = ec->rx_coalesce_usecs;
- } else {
- adapter->itr = (1000000 / ec->rx_coalesce_usecs);
- adapter->itr_setting = adapter->itr & ~3;
- }
-
- if (adapter->itr_setting != 0)
- ew32(ITR, 1000000000 / (adapter->itr * 256));
- else
- ew32(ITR, 0);
-
- return 0;
-}
-
-static int e1000_nway_reset(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- if (netif_running(netdev))
- e1000_reinit_locked(adapter);
- return 0;
-}
-
-static void e1000_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- int i;
- char *p = NULL;
-
- e1000_update_stats(adapter);
- for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
- switch (e1000_gstrings_stats[i].type) {
- case NETDEV_STATS:
- p = (char *) netdev +
- e1000_gstrings_stats[i].stat_offset;
- break;
- case E1000_STATS:
- p = (char *) adapter +
- e1000_gstrings_stats[i].stat_offset;
- break;
- }
-
- data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-/* BUG_ON(i != E1000_STATS_LEN); */
-}
-
-static void e1000_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *e1000_gstrings_test,
- sizeof(e1000_gstrings_test));
- break;
- case ETH_SS_STATS:
- for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
- memcpy(p, e1000_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
-/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
- break;
- }
-}
-
-static const struct ethtool_ops e1000_ethtool_ops = {
- .get_settings = e1000_get_settings,
- .set_settings = e1000_set_settings,
- .get_drvinfo = e1000_get_drvinfo,
- .get_regs_len = e1000_get_regs_len,
- .get_regs = e1000_get_regs,
- .get_wol = e1000_get_wol,
- .set_wol = e1000_set_wol,
- .get_msglevel = e1000_get_msglevel,
- .set_msglevel = e1000_set_msglevel,
- .nway_reset = e1000_nway_reset,
- .get_link = e1000_get_link,
- .get_eeprom_len = e1000_get_eeprom_len,
- .get_eeprom = e1000_get_eeprom,
- .set_eeprom = e1000_set_eeprom,
- .get_ringparam = e1000_get_ringparam,
- .set_ringparam = e1000_set_ringparam,
- .get_pauseparam = e1000_get_pauseparam,
- .set_pauseparam = e1000_set_pauseparam,
- .self_test = e1000_diag_test,
- .get_strings = e1000_get_strings,
- .set_phys_id = e1000_set_phys_id,
- .get_ethtool_stats = e1000_get_ethtool_stats,
- .get_sset_count = e1000_get_sset_count,
- .get_coalesce = e1000_get_coalesce,
- .set_coalesce = e1000_set_coalesce,
-};
-
-void e1000_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
- */
-
-/* e1000_hw.c
- * Shared functions for accessing and configuring the MAC
- */
-
-#include "e1000.h"
-
-static s32 e1000_check_downshift(struct e1000_hw *hw);
-static s32 e1000_check_polarity(struct e1000_hw *hw,
- e1000_rev_polarity *polarity);
-static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
-static void e1000_clear_vfta(struct e1000_hw *hw);
-static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
- bool link_up);
-static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
-static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
-static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
-static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
- u16 *max_length);
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static s32 e1000_id_led_init(struct e1000_hw *hw);
-static void e1000_init_rx_addrs(struct e1000_hw *hw);
-static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info);
-static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info);
-static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_wait_autoneg(struct e1000_hw *hw);
-static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
-static s32 e1000_set_phy_type(struct e1000_hw *hw);
-static void e1000_phy_init_script(struct e1000_hw *hw);
-static s32 e1000_setup_copper_link(struct e1000_hw *hw);
-static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
-static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
-static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
-static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
-static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
-static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
-static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
-static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
-static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
-static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 phy_data);
-static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 *phy_data);
-static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
-static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
-static void e1000_release_eeprom(struct e1000_hw *hw);
-static void e1000_standby_eeprom(struct e1000_hw *hw);
-static s32 e1000_set_vco_speed(struct e1000_hw *hw);
-static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
-static s32 e1000_set_phy_mode(struct e1000_hw *hw);
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data);
-
-/* IGP cable length table */
-static const
-u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
- 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
- 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
- 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
- 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
- 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
- 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
- 100,
- 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
- 110, 110,
- 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
- 120, 120
-};
-
-static DEFINE_SPINLOCK(e1000_eeprom_lock);
-
-/**
- * e1000_set_phy_type - Set the phy type member in the hw struct.
- * @hw: Struct containing variables accessed by shared code
- */
-static s32 e1000_set_phy_type(struct e1000_hw *hw)
-{
- e_dbg("e1000_set_phy_type");
-
- if (hw->mac_type == e1000_undefined)
- return -E1000_ERR_PHY_TYPE;
-
- switch (hw->phy_id) {
- case M88E1000_E_PHY_ID:
- case M88E1000_I_PHY_ID:
- case M88E1011_I_PHY_ID:
- case M88E1111_I_PHY_ID:
- case M88E1118_E_PHY_ID:
- hw->phy_type = e1000_phy_m88;
- break;
- case IGP01E1000_I_PHY_ID:
- if (hw->mac_type == e1000_82541 ||
- hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82547_rev_2)
- hw->phy_type = e1000_phy_igp;
- break;
- case RTL8211B_PHY_ID:
- hw->phy_type = e1000_phy_8211;
- break;
- case RTL8201N_PHY_ID:
- hw->phy_type = e1000_phy_8201;
- break;
- default:
- /* Should never have loaded on this device */
- hw->phy_type = e1000_phy_undefined;
- return -E1000_ERR_PHY_TYPE;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
- * @hw: Struct containing variables accessed by shared code
- */
-static void e1000_phy_init_script(struct e1000_hw *hw)
-{
- u32 ret_val;
- u16 phy_saved_data;
-
- e_dbg("e1000_phy_init_script");
-
- if (hw->phy_init_script) {
- msleep(20);
-
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of this routine. */
- ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- /* Disabled the PHY transmitter */
- e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
- msleep(20);
-
- e1000_write_phy_reg(hw, 0x0000, 0x0140);
- msleep(5);
-
- switch (hw->mac_type) {
- case e1000_82541:
- case e1000_82547:
- e1000_write_phy_reg(hw, 0x1F95, 0x0001);
- e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
- e1000_write_phy_reg(hw, 0x1F79, 0x0018);
- e1000_write_phy_reg(hw, 0x1F30, 0x1600);
- e1000_write_phy_reg(hw, 0x1F31, 0x0014);
- e1000_write_phy_reg(hw, 0x1F32, 0x161C);
- e1000_write_phy_reg(hw, 0x1F94, 0x0003);
- e1000_write_phy_reg(hw, 0x1F96, 0x003F);
- e1000_write_phy_reg(hw, 0x2010, 0x0008);
- break;
-
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- e1000_write_phy_reg(hw, 0x1F73, 0x0099);
- break;
- default:
- break;
- }
-
- e1000_write_phy_reg(hw, 0x0000, 0x3300);
- msleep(20);
-
- /* Now enable the transmitter */
- e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (hw->mac_type == e1000_82547) {
- u16 fused, fine, coarse;
-
- /* Move to analog registers page */
- e1000_read_phy_reg(hw,
- IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
- &fused);
-
- if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
- e1000_read_phy_reg(hw,
- IGP01E1000_ANALOG_FUSE_STATUS,
- &fused);
-
- fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
- coarse =
- fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
-
- if (coarse >
- IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
- coarse -=
- IGP01E1000_ANALOG_FUSE_COARSE_10;
- fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
- } else if (coarse ==
- IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
- fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
-
- fused =
- (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
- (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
- (coarse &
- IGP01E1000_ANALOG_FUSE_COARSE_MASK);
-
- e1000_write_phy_reg(hw,
- IGP01E1000_ANALOG_FUSE_CONTROL,
- fused);
- e1000_write_phy_reg(hw,
- IGP01E1000_ANALOG_FUSE_BYPASS,
- IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
- }
- }
- }
-}
-
-/**
- * e1000_set_mac_type - Set the mac type member in the hw struct.
- * @hw: Struct containing variables accessed by shared code
- */
-s32 e1000_set_mac_type(struct e1000_hw *hw)
-{
- e_dbg("e1000_set_mac_type");
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82542:
- switch (hw->revision_id) {
- case E1000_82542_2_0_REV_ID:
- hw->mac_type = e1000_82542_rev2_0;
- break;
- case E1000_82542_2_1_REV_ID:
- hw->mac_type = e1000_82542_rev2_1;
- break;
- default:
- /* Invalid 82542 revision ID */
- return -E1000_ERR_MAC_TYPE;
- }
- break;
- case E1000_DEV_ID_82543GC_FIBER:
- case E1000_DEV_ID_82543GC_COPPER:
- hw->mac_type = e1000_82543;
- break;
- case E1000_DEV_ID_82544EI_COPPER:
- case E1000_DEV_ID_82544EI_FIBER:
- case E1000_DEV_ID_82544GC_COPPER:
- case E1000_DEV_ID_82544GC_LOM:
- hw->mac_type = e1000_82544;
- break;
- case E1000_DEV_ID_82540EM:
- case E1000_DEV_ID_82540EM_LOM:
- case E1000_DEV_ID_82540EP:
- case E1000_DEV_ID_82540EP_LOM:
- case E1000_DEV_ID_82540EP_LP:
- hw->mac_type = e1000_82540;
- break;
- case E1000_DEV_ID_82545EM_COPPER:
- case E1000_DEV_ID_82545EM_FIBER:
- hw->mac_type = e1000_82545;
- break;
- case E1000_DEV_ID_82545GM_COPPER:
- case E1000_DEV_ID_82545GM_FIBER:
- case E1000_DEV_ID_82545GM_SERDES:
- hw->mac_type = e1000_82545_rev_3;
- break;
- case E1000_DEV_ID_82546EB_COPPER:
- case E1000_DEV_ID_82546EB_FIBER:
- case E1000_DEV_ID_82546EB_QUAD_COPPER:
- hw->mac_type = e1000_82546;
- break;
- case E1000_DEV_ID_82546GB_COPPER:
- case E1000_DEV_ID_82546GB_FIBER:
- case E1000_DEV_ID_82546GB_SERDES:
- case E1000_DEV_ID_82546GB_PCIE:
- case E1000_DEV_ID_82546GB_QUAD_COPPER:
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- hw->mac_type = e1000_82546_rev_3;
- break;
- case E1000_DEV_ID_82541EI:
- case E1000_DEV_ID_82541EI_MOBILE:
- case E1000_DEV_ID_82541ER_LOM:
- hw->mac_type = e1000_82541;
- break;
- case E1000_DEV_ID_82541ER:
- case E1000_DEV_ID_82541GI:
- case E1000_DEV_ID_82541GI_LF:
- case E1000_DEV_ID_82541GI_MOBILE:
- hw->mac_type = e1000_82541_rev_2;
- break;
- case E1000_DEV_ID_82547EI:
- case E1000_DEV_ID_82547EI_MOBILE:
- hw->mac_type = e1000_82547;
- break;
- case E1000_DEV_ID_82547GI:
- hw->mac_type = e1000_82547_rev_2;
- break;
- case E1000_DEV_ID_INTEL_CE4100_GBE:
- hw->mac_type = e1000_ce4100;
- break;
- default:
- /* Should never have loaded on this device */
- return -E1000_ERR_MAC_TYPE;
- }
-
- switch (hw->mac_type) {
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- hw->asf_firmware_present = true;
- break;
- default:
- break;
- }
-
- /* The 82543 chip does not count tx_carrier_errors properly in
- * FD mode
- */
- if (hw->mac_type == e1000_82543)
- hw->bad_tx_carr_stats_fd = true;
-
- if (hw->mac_type > e1000_82544)
- hw->has_smbus = true;
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_set_media_type - Set media type and TBI compatibility.
- * @hw: Struct containing variables accessed by shared code
- */
-void e1000_set_media_type(struct e1000_hw *hw)
-{
- u32 status;
-
- e_dbg("e1000_set_media_type");
-
- if (hw->mac_type != e1000_82543) {
- /* tbi_compatibility is only valid on 82543 */
- hw->tbi_compatibility_en = false;
- }
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82545GM_SERDES:
- case E1000_DEV_ID_82546GB_SERDES:
- hw->media_type = e1000_media_type_internal_serdes;
- break;
- default:
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- hw->media_type = e1000_media_type_fiber;
- break;
- case e1000_ce4100:
- hw->media_type = e1000_media_type_copper;
- break;
- default:
- status = er32(STATUS);
- if (status & E1000_STATUS_TBIMODE) {
- hw->media_type = e1000_media_type_fiber;
- /* tbi_compatibility not valid on fiber */
- hw->tbi_compatibility_en = false;
- } else {
- hw->media_type = e1000_media_type_copper;
- }
- break;
- }
- }
-}
-
-/**
- * e1000_reset_hw: reset the hardware completely
- * @hw: Struct containing variables accessed by shared code
- *
- * Reset the transmit and receive units; mask and clear all interrupts.
- */
-s32 e1000_reset_hw(struct e1000_hw *hw)
-{
- u32 ctrl;
- u32 ctrl_ext;
- u32 icr;
- u32 manc;
- u32 led_ctrl;
- s32 ret_val;
-
- e_dbg("e1000_reset_hw");
-
- /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
- if (hw->mac_type == e1000_82542_rev2_0) {
- e_dbg("Disabling MWI on 82542 rev 2.0\n");
- e1000_pci_clear_mwi(hw);
- }
-
- /* Clear interrupt mask to stop board from generating interrupts */
- e_dbg("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- /* Disable the Transmit and Receive units. Then delay to allow
- * any pending transactions to complete before we hit the MAC with
- * the global reset.
- */
- ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
- E1000_WRITE_FLUSH();
-
- /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
- hw->tbi_compatibility_on = false;
-
- /* Delay to allow any outstanding PCI transactions to complete before
- * resetting the device
- */
- msleep(10);
-
- ctrl = er32(CTRL);
-
- /* Must reset the PHY before resetting the MAC */
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
- E1000_WRITE_FLUSH();
- msleep(5);
- }
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- e_dbg("Issuing a global reset to MAC\n");
-
- switch (hw->mac_type) {
- case e1000_82544:
- case e1000_82540:
- case e1000_82545:
- case e1000_82546:
- case e1000_82541:
- case e1000_82541_rev_2:
- /* These controllers can't ack the 64-bit write when issuing the
- * reset, so use IO-mapping as a workaround to issue the reset */
- E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
- break;
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- /* Reset is performed on a shadow of the control register */
- ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
- break;
- case e1000_ce4100:
- default:
- ew32(CTRL, (ctrl | E1000_CTRL_RST));
- break;
- }
-
- /* After MAC reset, force reload of EEPROM to restore power-on settings to
- * device. Later controllers reload the EEPROM automatically, so just wait
- * for reload to complete.
- */
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* Wait for reset to complete */
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- /* Wait for EEPROM reload */
- msleep(2);
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- /* Wait for EEPROM reload */
- msleep(20);
- break;
- default:
- /* Auto read done will delay 5ms or poll based on mac type */
- ret_val = e1000_get_auto_rd_done(hw);
- if (ret_val)
- return ret_val;
- break;
- }
-
- /* Disable HW ARPs on ASF enabled adapters */
- if (hw->mac_type >= e1000_82540) {
- manc = er32(MANC);
- manc &= ~(E1000_MANC_ARP_EN);
- ew32(MANC, manc);
- }
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- e1000_phy_init_script(hw);
-
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
- }
-
- /* Clear interrupt mask to stop board from generating interrupts */
- e_dbg("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- /* Clear any pending interrupt events. */
- icr = er32(ICR);
-
- /* If MWI was previously enabled, reenable it. */
- if (hw->mac_type == e1000_82542_rev2_0) {
- if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
- e1000_pci_set_mwi(hw);
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_init_hw: Performs basic configuration of the adapter.
- * @hw: Struct containing variables accessed by shared code
- *
- * Assumes that the controller has previously been reset and is in a
- * post-reset uninitialized state. Initializes the receive address registers,
- * multicast table, and VLAN filter table. Calls routines to setup link
- * configuration and flow control settings. Clears all on-chip counters. Leaves
- * the transmit and receive units disabled and uninitialized.
- */
-s32 e1000_init_hw(struct e1000_hw *hw)
-{
- u32 ctrl;
- u32 i;
- s32 ret_val;
- u32 mta_size;
- u32 ctrl_ext;
-
- e_dbg("e1000_init_hw");
-
- /* Initialize Identification LED */
- ret_val = e1000_id_led_init(hw);
- if (ret_val) {
- e_dbg("Error Initializing Identification LED\n");
- return ret_val;
- }
-
- /* Set the media type and TBI compatibility */
- e1000_set_media_type(hw);
-
- /* Disabling VLAN filtering. */
- e_dbg("Initializing the IEEE VLAN\n");
- if (hw->mac_type < e1000_82545_rev_3)
- ew32(VET, 0);
- e1000_clear_vfta(hw);
-
- /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
- if (hw->mac_type == e1000_82542_rev2_0) {
- e_dbg("Disabling MWI on 82542 rev 2.0\n");
- e1000_pci_clear_mwi(hw);
- ew32(RCTL, E1000_RCTL_RST);
- E1000_WRITE_FLUSH();
- msleep(5);
- }
-
- /* Setup the receive address. This involves initializing all of the Receive
- * Address Registers (RARs 0 - 15).
- */
- e1000_init_rx_addrs(hw);
-
- /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
- if (hw->mac_type == e1000_82542_rev2_0) {
- ew32(RCTL, 0);
- E1000_WRITE_FLUSH();
- msleep(1);
- if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
- e1000_pci_set_mwi(hw);
- }
-
- /* Zero out the Multicast HASH table */
- e_dbg("Zeroing the MTA\n");
- mta_size = E1000_MC_TBL_SIZE;
- for (i = 0; i < mta_size; i++) {
- E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
- /* use write flush to prevent Memory Write Block (MWB) from
- * occurring when accessing our register space */
- E1000_WRITE_FLUSH();
- }
-
- /* Set the PCI priority bit correctly in the CTRL register. This
- * determines if the adapter gives priority to receives, or if it
- * gives equal priority to transmits and receives. Valid only on
- * 82542 and 82543 silicon.
- */
- if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
- }
-
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
- if (hw->bus_type == e1000_bus_type_pcix
- && e1000_pcix_get_mmrbc(hw) > 2048)
- e1000_pcix_set_mmrbc(hw, 2048);
- break;
- }
-
- /* Call a subroutine to configure the link and setup flow control. */
- ret_val = e1000_setup_link(hw);
-
- /* Set the transmit descriptor write-back policy */
- if (hw->mac_type > e1000_82544) {
- ctrl = er32(TXDCTL);
- ctrl =
- (ctrl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
- ew32(TXDCTL, ctrl);
- }
-
- /* Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- e1000_clear_hw_cntrs(hw);
-
- if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
- hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
- ctrl_ext = er32(CTRL_EXT);
- /* Relaxed ordering must be disabled to avoid a parity
- * error crash in a PCI slot. */
- ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- return ret_val;
-}
-
-/**
- * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
- * @hw: Struct containing variables accessed by shared code.
- */
-static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
-{
- u16 eeprom_data;
- s32 ret_val;
-
- e_dbg("e1000_adjust_serdes_amplitude");
-
- if (hw->media_type != e1000_media_type_internal_serdes)
- return E1000_SUCCESS;
-
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- return E1000_SUCCESS;
- }
-
- ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
- &eeprom_data);
- if (ret_val) {
- return ret_val;
- }
-
- if (eeprom_data != EEPROM_RESERVED_WORD) {
- /* Adjust SERDES output amplitude only. */
- eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_setup_link - Configures flow control and link settings.
- * @hw: Struct containing variables accessed by shared code
- *
- * Determines which flow control settings to use. Calls the appropriate media-
- * specific link configuration function. Configures the flow control settings.
- * Assuming the adapter has a valid link partner, a valid link should be
- * established. Assumes the hardware has previously been reset and the
- * transmitter and receiver are not enabled.
- */
-s32 e1000_setup_link(struct e1000_hw *hw)
-{
- u32 ctrl_ext;
- s32 ret_val;
- u16 eeprom_data;
-
- e_dbg("e1000_setup_link");
-
- /* Read and store word 0x0F of the EEPROM. This word contains bits
- * that determine the hardware's default PAUSE (flow control) mode,
- * a bit that determines whether the HW defaults to enabling or
- * disabling auto-negotiation, and the direction of the
- * SW defined pins. If there is no SW over-ride of the flow
- * control setting, then the variable hw->fc will
- * be initialized based on a value in the EEPROM.
- */
- if (hw->fc == E1000_FC_DEFAULT) {
- ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
- 1, &eeprom_data);
- if (ret_val) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
- hw->fc = E1000_FC_NONE;
- else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
- EEPROM_WORD0F_ASM_DIR)
- hw->fc = E1000_FC_TX_PAUSE;
- else
- hw->fc = E1000_FC_FULL;
- }
-
- /* We want to save off the original Flow Control configuration just
- * in case we get disconnected and then reconnected into a different
- * hub or switch with different Flow Control capabilities.
- */
- if (hw->mac_type == e1000_82542_rev2_0)
- hw->fc &= (~E1000_FC_TX_PAUSE);
-
- if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
- hw->fc &= (~E1000_FC_RX_PAUSE);
-
- hw->original_fc = hw->fc;
-
- e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc);
-
- /* Take the 4 bits from EEPROM word 0x0F that determine the initial
- * polarity value for the SW controlled pins, and setup the
- * Extended Device Control reg with that info.
- * This is needed because one of the SW controlled pins is used for
- * signal detection. So this should be done before e1000_setup_pcs_link()
- * or e1000_phy_setup() is called.
- */
- if (hw->mac_type == e1000_82543) {
- ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
- 1, &eeprom_data);
- if (ret_val) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
- SWDPIO__EXT_SHIFT);
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- /* Call the necessary subroutine to configure the link. */
- ret_val = (hw->media_type == e1000_media_type_copper) ?
- e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
-
- /* Initialize the flow control address, type, and PAUSE timer
- * registers to their default values. This is done even if flow
- * control is disabled, because it does not hurt anything to
- * initialize these registers.
- */
- e_dbg("Initializing the Flow Control address, type and timer regs\n");
-
- ew32(FCT, FLOW_CONTROL_TYPE);
- ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
- ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
-
- ew32(FCTTV, hw->fc_pause_time);
-
- /* Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames in not enabled, then these
- * registers will be set to 0.
- */
- if (!(hw->fc & E1000_FC_TX_PAUSE)) {
- ew32(FCRTL, 0);
- ew32(FCRTH, 0);
- } else {
- /* We need to set up the Receive Threshold high and low water marks
- * as well as (optionally) enabling the transmission of XON frames.
- */
- if (hw->fc_send_xon) {
- ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
- ew32(FCRTH, hw->fc_high_water);
- } else {
- ew32(FCRTL, hw->fc_low_water);
- ew32(FCRTH, hw->fc_high_water);
- }
- }
- return ret_val;
-}
-
-/**
- * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
- * @hw: Struct containing variables accessed by shared code
- *
- * Manipulates Physical Coding Sublayer functions in order to configure
- * link. Assumes the hardware has been previously reset and the transmitter
- * and receiver are not enabled.
- */
-static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
-{
- u32 ctrl;
- u32 status;
- u32 txcw = 0;
- u32 i;
- u32 signal = 0;
- s32 ret_val;
-
- e_dbg("e1000_setup_fiber_serdes_link");
-
- /* On adapters with a MAC newer than 82544, SWDP 1 will be
- * set when the optics detect a signal. On older adapters, it will be
- * cleared when there is a signal. This applies to fiber media only.
- * If we're on serdes media, adjust the output amplitude to value
- * set in the EEPROM.
- */
- ctrl = er32(CTRL);
- if (hw->media_type == e1000_media_type_fiber)
- signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
-
- ret_val = e1000_adjust_serdes_amplitude(hw);
- if (ret_val)
- return ret_val;
-
- /* Take the link out of reset */
- ctrl &= ~(E1000_CTRL_LRST);
-
- /* Adjust VCO speed to improve BER performance */
- ret_val = e1000_set_vco_speed(hw);
- if (ret_val)
- return ret_val;
-
- e1000_config_collision_dist(hw);
-
- /* Check for a software override of the flow control settings, and setup
- * the device accordingly. If auto-negotiation is enabled, then software
- * will have to set the "PAUSE" bits to the correct value in the Tranmsit
- * Config Word Register (TXCW) and re-start auto-negotiation. However, if
- * auto-negotiation is disabled, then software will have to manually
- * configure the two flow control enable bits in the CTRL register.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames, but
- * not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but we do
- * not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- */
- switch (hw->fc) {
- case E1000_FC_NONE:
- /* Flow control is completely disabled by a software over-ride. */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
- break;
- case E1000_FC_RX_PAUSE:
- /* RX Flow control is enabled and TX Flow control is disabled by a
- * software over-ride. Since there really isn't a way to advertise
- * that we are capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- case E1000_FC_TX_PAUSE:
- /* TX Flow control is enabled, and RX Flow control is disabled, by a
- * software over-ride.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
- break;
- case E1000_FC_FULL:
- /* Flow control (both RX and TX) is enabled by a software over-ride. */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- break;
- }
-
- /* Since auto-negotiation is enabled, take the link out of reset (the link
- * will be in reset, because we previously reset the chip). This will
- * restart auto-negotiation. If auto-negotiation is successful then the
- * link-up status bit will be set and the flow control enable bits (RFCE
- * and TFCE) will be set according to their negotiated value.
- */
- e_dbg("Auto-negotiation enabled\n");
-
- ew32(TXCW, txcw);
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- hw->txcw = txcw;
- msleep(1);
-
- /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
- * indication in the Device Status Register. Time-out if a link isn't
- * seen in 500 milliseconds seconds (Auto-negotiation should complete in
- * less than 500 milliseconds even if the other end is doing it in SW).
- * For internal serdes, we just assume a signal is present, then poll.
- */
- if (hw->media_type == e1000_media_type_internal_serdes ||
- (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
- e_dbg("Looking for Link\n");
- for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
- msleep(10);
- status = er32(STATUS);
- if (status & E1000_STATUS_LU)
- break;
- }
- if (i == (LINK_UP_TIMEOUT / 10)) {
- e_dbg("Never got a valid link from auto-neg!!!\n");
- hw->autoneg_failed = 1;
- /* AutoNeg failed to achieve a link, so we'll call
- * e1000_check_for_link. This routine will force the link up if
- * we detect a signal. This will allow us to communicate with
- * non-autonegotiating link partners.
- */
- ret_val = e1000_check_for_link(hw);
- if (ret_val) {
- e_dbg("Error while checking for link\n");
- return ret_val;
- }
- hw->autoneg_failed = 0;
- } else {
- hw->autoneg_failed = 0;
- e_dbg("Valid Link Found\n");
- }
- } else {
- e_dbg("No Signal Detected\n");
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_rtl_setup - Copper link setup for e1000_phy_rtl series.
- * @hw: Struct containing variables accessed by shared code
- *
- * Commits changes to PHY configuration by calling e1000_phy_reset().
- */
-static s32 e1000_copper_link_rtl_setup(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- /* SW reset the PHY so all changes take effect */
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- e_dbg("Error Resetting the PHY\n");
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
-
-static s32 gbe_dhg_phy_setup(struct e1000_hw *hw)
-{
- s32 ret_val;
- u32 ctrl_aux;
-
- switch (hw->phy_type) {
- case e1000_phy_8211:
- ret_val = e1000_copper_link_rtl_setup(hw);
- if (ret_val) {
- e_dbg("e1000_copper_link_rtl_setup failed!\n");
- return ret_val;
- }
- break;
- case e1000_phy_8201:
- /* Set RMII mode */
- ctrl_aux = er32(CTL_AUX);
- ctrl_aux |= E1000_CTL_AUX_RMII;
- ew32(CTL_AUX, ctrl_aux);
- E1000_WRITE_FLUSH();
-
- /* Disable the J/K bits required for receive */
- ctrl_aux = er32(CTL_AUX);
- ctrl_aux |= 0x4;
- ctrl_aux &= ~0x2;
- ew32(CTL_AUX, ctrl_aux);
- E1000_WRITE_FLUSH();
- ret_val = e1000_copper_link_rtl_setup(hw);
-
- if (ret_val) {
- e_dbg("e1000_copper_link_rtl_setup failed!\n");
- return ret_val;
- }
- break;
- default:
- e_dbg("Error Resetting the PHY\n");
- return E1000_ERR_PHY_TYPE;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_preconfig - early configuration for copper
- * @hw: Struct containing variables accessed by shared code
- *
- * Make sure we have a valid PHY and change PHY mode before link setup.
- */
-static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_copper_link_preconfig");
-
- ctrl = er32(CTRL);
- /* With 82543, we need to force speed and duplex on the MAC equal to what
- * the PHY speed and duplex configuration is. In addition, we need to
- * perform a hardware reset on the PHY to take it out of reset.
- */
- if (hw->mac_type > e1000_82543) {
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ew32(CTRL, ctrl);
- } else {
- ctrl |=
- (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
- ew32(CTRL, ctrl);
- ret_val = e1000_phy_hw_reset(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Make sure we have a valid PHY */
- ret_val = e1000_detect_gig_phy(hw);
- if (ret_val) {
- e_dbg("Error, did not detect valid phy.\n");
- return ret_val;
- }
- e_dbg("Phy ID = %x\n", hw->phy_id);
-
- /* Set PHY to class A mode (if necessary) */
- ret_val = e1000_set_phy_mode(hw);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82545_rev_3) ||
- (hw->mac_type == e1000_82546_rev_3)) {
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- phy_data |= 0x00000008;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- }
-
- if (hw->mac_type <= e1000_82543 ||
- hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
- hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2)
- hw->phy_reset_disable = false;
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
- * @hw: Struct containing variables accessed by shared code
- */
-static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
-{
- u32 led_ctrl;
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_copper_link_igp_setup");
-
- if (hw->phy_reset_disable)
- return E1000_SUCCESS;
-
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- e_dbg("Error Resetting the PHY\n");
- return ret_val;
- }
-
- /* Wait 15ms for MAC to configure PHY from eeprom settings */
- msleep(15);
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
-
- /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
- if (hw->phy_type == e1000_phy_igp) {
- /* disable lplu d3 during driver init */
- ret_val = e1000_set_d3_lplu_state(hw, false);
- if (ret_val) {
- e_dbg("Error Disabling LPLU D3\n");
- return ret_val;
- }
- }
-
- /* Configure mdi-mdix settings */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- hw->dsp_config_state = e1000_dsp_config_disabled;
- /* Force MDI for earlier revs of the IGP PHY */
- phy_data &=
- ~(IGP01E1000_PSCR_AUTO_MDIX |
- IGP01E1000_PSCR_FORCE_MDI_MDIX);
- hw->mdix = 1;
-
- } else {
- hw->dsp_config_state = e1000_dsp_config_enabled;
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
- switch (hw->mdix) {
- case 1:
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 2:
- phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 0:
- default:
- phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
- break;
- }
- }
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* set auto-master slave resolution settings */
- if (hw->autoneg) {
- e1000_ms_type phy_ms_setting = hw->master_slave;
-
- if (hw->ffe_config_state == e1000_ffe_config_active)
- hw->ffe_config_state = e1000_ffe_config_enabled;
-
- if (hw->dsp_config_state == e1000_dsp_config_activated)
- hw->dsp_config_state = e1000_dsp_config_enabled;
-
- /* when autonegotiation advertisement is only 1000Mbps then we
- * should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default. */
- if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
- /* Disable SmartSpeed */
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- /* Set auto Master/Slave resolution process */
- ret_val =
- e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
- phy_data &= ~CR_1000T_MS_ENABLE;
- ret_val =
- e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* load defaults for future use */
- hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
- ((phy_data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) : e1000_ms_auto;
-
- switch (phy_ms_setting) {
- case e1000_ms_force_master:
- phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- phy_data |= CR_1000T_MS_ENABLE;
- phy_data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- phy_data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
- * @hw: Struct containing variables accessed by shared code
- */
-static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_copper_link_mgp_setup");
-
- if (hw->phy_reset_disable)
- return E1000_SUCCESS;
-
- /* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
- /* Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
- switch (hw->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- case 0:
- default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
-
- /* Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (hw->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- if (hw->phy_revision < M88E1011_I_REV_4) {
- /* Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
- if ((hw->phy_revision == E1000_REVISION_2) &&
- (hw->phy_id == M88E1111_I_PHY_ID)) {
- /* Vidalia Phy, set the downshift counter to 5x */
- phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
- phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
- } else {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- ret_val = e1000_write_phy_reg(hw,
- M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
- }
- }
-
- /* SW Reset the PHY so all changes take effect */
- ret_val = e1000_phy_reset(hw);
- if (ret_val) {
- e_dbg("Error Resetting the PHY\n");
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_autoneg - setup auto-neg
- * @hw: Struct containing variables accessed by shared code
- *
- * Setup auto-negotiation and flow control advertisements,
- * and then perform auto-negotiation.
- */
-static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_copper_link_autoneg");
-
- /* Perform some bounds checking on the hw->autoneg_advertised
- * parameter. If this variable is zero, then set it to the default.
- */
- hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- /* If autoneg_advertised is zero, we assume it was not defaulted
- * by the calling code so we set to advertise full capability.
- */
- if (hw->autoneg_advertised == 0)
- hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- /* IFE/RTL8201N PHY only supports 10/100 */
- if (hw->phy_type == e1000_phy_8201)
- hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
-
- e_dbg("Reconfiguring auto-neg advertisement params\n");
- ret_val = e1000_phy_setup_autoneg(hw);
- if (ret_val) {
- e_dbg("Error Setting up Auto-Negotiation\n");
- return ret_val;
- }
- e_dbg("Restarting Auto-Neg\n");
-
- /* Restart auto-negotiation by setting the Auto Neg Enable bit and
- * the Auto Neg Restart bit in the PHY control register.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* Does the user want to wait for Auto-Neg to complete here, or
- * check at a later time (for example, callback routine).
- */
- if (hw->wait_autoneg_complete) {
- ret_val = e1000_wait_autoneg(hw);
- if (ret_val) {
- e_dbg
- ("Error while waiting for autoneg to complete\n");
- return ret_val;
- }
- }
-
- hw->get_link_status = true;
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_copper_link_postconfig - post link setup
- * @hw: Struct containing variables accessed by shared code
- *
- * Config the MAC and the PHY after link is up.
- * 1) Set up the MAC to the current PHY speed/duplex
- * if we are on 82543. If we
- * are on newer silicon, we only need to configure
- * collision distance in the Transmit Control Register.
- * 2) Set up flow control on the MAC to that established with
- * the link partner.
- * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
- */
-static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
-{
- s32 ret_val;
- e_dbg("e1000_copper_link_postconfig");
-
- if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) {
- e1000_config_collision_dist(hw);
- } else {
- ret_val = e1000_config_mac_to_phy(hw);
- if (ret_val) {
- e_dbg("Error configuring MAC to PHY settings\n");
- return ret_val;
- }
- }
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error Configuring Flow Control\n");
- return ret_val;
- }
-
- /* Config DSP to improve Giga link quality */
- if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_config_dsp_after_link_change(hw, true);
- if (ret_val) {
- e_dbg("Error Configuring DSP after link up\n");
- return ret_val;
- }
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_setup_copper_link - phy/speed/duplex setting
- * @hw: Struct containing variables accessed by shared code
- *
- * Detects which PHY is present and sets up the speed and duplex
- */
-static s32 e1000_setup_copper_link(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 i;
- u16 phy_data;
-
- e_dbg("e1000_setup_copper_link");
-
- /* Check if it is a valid PHY and set PHY mode if necessary. */
- ret_val = e1000_copper_link_preconfig(hw);
- if (ret_val)
- return ret_val;
-
- if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_copper_link_igp_setup(hw);
- if (ret_val)
- return ret_val;
- } else if (hw->phy_type == e1000_phy_m88) {
- ret_val = e1000_copper_link_mgp_setup(hw);
- if (ret_val)
- return ret_val;
- } else {
- ret_val = gbe_dhg_phy_setup(hw);
- if (ret_val) {
- e_dbg("gbe_dhg_phy_setup failed!\n");
- return ret_val;
- }
- }
-
- if (hw->autoneg) {
- /* Setup autoneg and flow control advertisement
- * and perform autonegotiation */
- ret_val = e1000_copper_link_autoneg(hw);
- if (ret_val)
- return ret_val;
- } else {
- /* PHY will be set to 10H, 10F, 100H,or 100F
- * depending on value from forced_speed_duplex. */
- e_dbg("Forcing speed and duplex\n");
- ret_val = e1000_phy_force_speed_duplex(hw);
- if (ret_val) {
- e_dbg("Error Forcing Speed and Duplex\n");
- return ret_val;
- }
- }
-
- /* Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
- for (i = 0; i < 10; i++) {
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & MII_SR_LINK_STATUS) {
- /* Config the MAC and PHY after link is up */
- ret_val = e1000_copper_link_postconfig(hw);
- if (ret_val)
- return ret_val;
-
- e_dbg("Valid link established!!!\n");
- return E1000_SUCCESS;
- }
- udelay(10);
- }
-
- e_dbg("Unable to establish link!!!\n");
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_setup_autoneg - phy settings
- * @hw: Struct containing variables accessed by shared code
- *
- * Configures PHY autoneg and flow control advertisement settings
- */
-s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_autoneg_adv_reg;
- u16 mii_1000t_ctrl_reg;
-
- e_dbg("e1000_phy_setup_autoneg");
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
- else if (hw->phy_type == e1000_phy_8201)
- mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
-
- /* Need to parse both autoneg_advertised and fc and set up
- * the appropriate PHY registers. First we will parse for
- * autoneg_advertised software override. Since we can advertise
- * a plethora of combinations, we need to check each bit
- * individually.
- */
-
- /* First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
- mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
-
- e_dbg("autoneg_advertised %x\n", hw->autoneg_advertised);
-
- /* Do we want to advertise 10 Mb Half Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
- e_dbg("Advertise 10mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
- }
-
- /* Do we want to advertise 10 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
- e_dbg("Advertise 10mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Half Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
- e_dbg("Advertise 100mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
- e_dbg("Advertise 100mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
- }
-
- /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
- if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
- e_dbg
- ("Advertise 1000mb Half duplex requested, request denied!\n");
- }
-
- /* Do we want to advertise 1000 Mb Full Duplex? */
- if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
- e_dbg("Advertise 1000mb Full duplex\n");
- mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
- }
-
- /* Check for a software override of the flow control settings, and
- * setup the PHY advertisement registers accordingly. If
- * auto-negotiation is enabled, then software will have to set the
- * "PAUSE" bits to the correct value in the Auto-Negotiation
- * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: No software override. The flow control configuration
- * in the EEPROM is used.
- */
- switch (hw->fc) {
- case E1000_FC_NONE: /* 0 */
- /* Flow control (RX & TX) is completely disabled by a
- * software over-ride.
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case E1000_FC_RX_PAUSE: /* 1 */
- /* RX Flow control is enabled, and TX Flow control is
- * disabled, by a software over-ride.
- */
- /* Since there really isn't a way to advertise that we are
- * capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later
- * (in e1000_config_fc_after_link_up) we will disable the
- *hw's ability to send PAUSE frames.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case E1000_FC_TX_PAUSE: /* 2 */
- /* TX Flow control is enabled, and RX Flow control is
- * disabled, by a software over-ride.
- */
- mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
- mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
- break;
- case E1000_FC_FULL: /* 3 */
- /* Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-
- if (hw->phy_type == e1000_phy_8201) {
- mii_1000t_ctrl_reg = 0;
- } else {
- ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
- mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_force_speed_duplex - force link settings
- * @hw: Struct containing variables accessed by shared code
- *
- * Force PHY speed and duplex settings to hw->forced_speed_duplex
- */
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 mii_ctrl_reg;
- u16 mii_status_reg;
- u16 phy_data;
- u16 i;
-
- e_dbg("e1000_phy_force_speed_duplex");
-
- /* Turn off Flow control if we are forcing speed and duplex. */
- hw->fc = E1000_FC_NONE;
-
- e_dbg("hw->fc = %d\n", hw->fc);
-
- /* Read the Device Control Register. */
- ctrl = er32(CTRL);
-
- /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~(DEVICE_SPEED_MASK);
-
- /* Clear the Auto Speed Detect Enable bit. */
- ctrl &= ~E1000_CTRL_ASDE;
-
- /* Read the MII Control Register. */
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- /* We need to disable autoneg in order to force link and duplex. */
-
- mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
-
- /* Are we forcing Full or Half Duplex? */
- if (hw->forced_speed_duplex == e1000_100_full ||
- hw->forced_speed_duplex == e1000_10_full) {
- /* We want to force full duplex so we SET the full duplex bits in the
- * Device and MII Control Registers.
- */
- ctrl |= E1000_CTRL_FD;
- mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
- e_dbg("Full Duplex\n");
- } else {
- /* We want to force half duplex so we CLEAR the full duplex bits in
- * the Device and MII Control Registers.
- */
- ctrl &= ~E1000_CTRL_FD;
- mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
- e_dbg("Half Duplex\n");
- }
-
- /* Are we forcing 100Mbps??? */
- if (hw->forced_speed_duplex == e1000_100_full ||
- hw->forced_speed_duplex == e1000_100_half) {
- /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
- ctrl |= E1000_CTRL_SPD_100;
- mii_ctrl_reg |= MII_CR_SPEED_100;
- mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- e_dbg("Forcing 100mb ");
- } else {
- /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
- ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- mii_ctrl_reg |= MII_CR_SPEED_10;
- mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- e_dbg("Forcing 10mb ");
- }
-
- e1000_config_collision_dist(hw);
-
- /* Write the configured values back to the Device Control Reg. */
- ew32(CTRL, ctrl);
-
- if (hw->phy_type == e1000_phy_m88) {
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
- * forced whenever speed are duplex are forced.
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- e_dbg("M88E1000 PSCR: %x\n", phy_data);
-
- /* Need to reset the PHY or these changes will be ignored */
- mii_ctrl_reg |= MII_CR_RESET;
-
- /* Disable MDI-X support for 10/100 */
- } else {
- /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
- * forced whenever speed or duplex are forced.
- */
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* Write back the modified PHY MII control register. */
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
- if (ret_val)
- return ret_val;
-
- udelay(1);
-
- /* The wait_autoneg_complete flag may be a little misleading here.
- * Since we are forcing speed and duplex, Auto-Neg is not enabled.
- * But we do want to delay for a period while forcing only so we
- * don't generate false No Link messages. So we will wait here
- * only if the user has set wait_autoneg_complete to 1, which is
- * the default.
- */
- if (hw->wait_autoneg_complete) {
- /* We will wait for autoneg to complete. */
- e_dbg("Waiting for forced speed/duplex link.\n");
- mii_status_reg = 0;
-
- /* We will wait for autoneg to complete or 4.5 seconds to expire. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Auto-Neg Complete bit
- * to be set.
- */
- ret_val =
- e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val =
- e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_LINK_STATUS)
- break;
- msleep(100);
- }
- if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
- /* We didn't get link. Reset the DSP and wait again for link. */
- ret_val = e1000_phy_reset_dsp(hw);
- if (ret_val) {
- e_dbg("Error Resetting PHY DSP\n");
- return ret_val;
- }
- }
- /* This loop will early-out if the link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- if (mii_status_reg & MII_SR_LINK_STATUS)
- break;
- msleep(100);
- /* Read the MII Status Register and wait for Auto-Neg Complete bit
- * to be set.
- */
- ret_val =
- e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val =
- e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
- }
- }
-
- if (hw->phy_type == e1000_phy_m88) {
- /* Because we reset the PHY above, we need to re-force TX_CLK in the
- * Extended PHY Specific Control Register to 25MHz clock. This value
- * defaults back to a 2.5MHz clock when the PHY is reset.
- */
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if (ret_val)
- return ret_val;
-
- /* In addition, because of the s/w reset above, we need to enable CRS on
- * TX. This must be set for both full and half duplex operation.
- */
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
- && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
- ret_val = e1000_polarity_reversal_workaround(hw);
- if (ret_val)
- return ret_val;
- }
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_config_collision_dist - set collision distance register
- * @hw: Struct containing variables accessed by shared code
- *
- * Sets the collision distance in the Transmit Control register.
- * Link should have been established previously. Reads the speed and duplex
- * information from the Device Status register.
- */
-void e1000_config_collision_dist(struct e1000_hw *hw)
-{
- u32 tctl, coll_dist;
-
- e_dbg("e1000_config_collision_dist");
-
- if (hw->mac_type < e1000_82543)
- coll_dist = E1000_COLLISION_DISTANCE_82542;
- else
- coll_dist = E1000_COLLISION_DISTANCE;
-
- tctl = er32(TCTL);
-
- tctl &= ~E1000_TCTL_COLD;
- tctl |= coll_dist << E1000_COLD_SHIFT;
-
- ew32(TCTL, tctl);
- E1000_WRITE_FLUSH();
-}
-
-/**
- * e1000_config_mac_to_phy - sync phy and mac settings
- * @hw: Struct containing variables accessed by shared code
- * @mii_reg: data to write to the MII control register
- *
- * Sets MAC speed and duplex settings to reflect the those in the PHY
- * The contents of the PHY register containing the needed information need to
- * be passed in.
- */
-static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_config_mac_to_phy");
-
- /* 82544 or newer MAC, Auto Speed Detection takes care of
- * MAC speed/duplex configuration.*/
- if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100))
- return E1000_SUCCESS;
-
- /* Read the Device Control Register and set the bits to Force Speed
- * and Duplex.
- */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
-
- switch (hw->phy_type) {
- case e1000_phy_8201:
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & RTL_PHY_CTRL_FD)
- ctrl |= E1000_CTRL_FD;
- else
- ctrl &= ~E1000_CTRL_FD;
-
- if (phy_data & RTL_PHY_CTRL_SPD_100)
- ctrl |= E1000_CTRL_SPD_100;
- else
- ctrl |= E1000_CTRL_SPD_10;
-
- e1000_config_collision_dist(hw);
- break;
- default:
- /* Set up duplex in the Device Control and Transmit Control
- * registers depending on negotiated values.
- */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & M88E1000_PSSR_DPLX)
- ctrl |= E1000_CTRL_FD;
- else
- ctrl &= ~E1000_CTRL_FD;
-
- e1000_config_collision_dist(hw);
-
- /* Set up speed in the Device Control register depending on
- * negotiated values.
- */
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
- ctrl |= E1000_CTRL_SPD_1000;
- else if ((phy_data & M88E1000_PSSR_SPEED) ==
- M88E1000_PSSR_100MBS)
- ctrl |= E1000_CTRL_SPD_100;
- }
-
- /* Write the configured values back to the Device Control Reg. */
- ew32(CTRL, ctrl);
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_force_mac_fc - force flow control settings
- * @hw: Struct containing variables accessed by shared code
- *
- * Forces the MAC's flow control settings.
- * Sets the TFCE and RFCE bits in the device control register to reflect
- * the adapter settings. TFCE and RFCE need to be explicitly set by
- * software when a Copper PHY is used because autonegotiation is managed
- * by the PHY rather than the MAC. Software must also configure these
- * bits when link is forced on a fiber connection.
- */
-s32 e1000_force_mac_fc(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- e_dbg("e1000_force_mac_fc");
-
- /* Get the current configuration of the Device Control Register */
- ctrl = er32(CTRL);
-
- /* Because we didn't get link via the internal auto-negotiation
- * mechanism (we either forced link or we got link via PHY
- * auto-neg), we have to manually enable/disable transmit an
- * receive flow control.
- *
- * The "Case" statement below enables/disable flow control
- * according to the "hw->fc" parameter.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause
- * frames but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
- * 3: Both Rx and TX flow control (symmetric) is enabled.
- * other: No other values should be possible at this point.
- */
-
- switch (hw->fc) {
- case E1000_FC_NONE:
- ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
- break;
- case E1000_FC_RX_PAUSE:
- ctrl &= (~E1000_CTRL_TFCE);
- ctrl |= E1000_CTRL_RFCE;
- break;
- case E1000_FC_TX_PAUSE:
- ctrl &= (~E1000_CTRL_RFCE);
- ctrl |= E1000_CTRL_TFCE;
- break;
- case E1000_FC_FULL:
- ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- }
-
- /* Disable TX Flow Control for 82542 (rev 2.0) */
- if (hw->mac_type == e1000_82542_rev2_0)
- ctrl &= (~E1000_CTRL_TFCE);
-
- ew32(CTRL, ctrl);
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_config_fc_after_link_up - configure flow control after autoneg
- * @hw: Struct containing variables accessed by shared code
- *
- * Configures flow control settings after link is established
- * Should be called immediately after a valid link has been established.
- * Forces MAC flow control settings if link was forced. When in MII/GMII mode
- * and autonegotiation is enabled, the MAC flow control settings will be set
- * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
- * and RFCE bits will be automatically set to the negotiated flow control mode.
- */
-static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_status_reg;
- u16 mii_nway_adv_reg;
- u16 mii_nway_lp_ability_reg;
- u16 speed;
- u16 duplex;
-
- e_dbg("e1000_config_fc_after_link_up");
-
- /* Check for the case where we have fiber media and auto-neg failed
- * so we had to force link. In this case, we need to force the
- * configuration of the MAC to match the "fc" parameter.
- */
- if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_internal_serdes)
- && (hw->autoneg_failed))
- || ((hw->media_type == e1000_media_type_copper)
- && (!hw->autoneg))) {
- ret_val = e1000_force_mac_fc(hw);
- if (ret_val) {
- e_dbg("Error forcing flow control settings\n");
- return ret_val;
- }
- }
-
- /* Check for the case where we have copper media and auto-neg is
- * enabled. In this case, we need to check and see if Auto-Neg
- * has completed, and if so, how the PHY and link partner has
- * flow control configured.
- */
- if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
- /* Read the MII Status Register and check to see if AutoNeg
- * has completed. We read this twice because this reg has
- * some "sticky" (latched) bits.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
- /* The AutoNeg process has completed, so we now need to
- * read both the Auto Negotiation Advertisement Register
- * (Address 4) and the Auto_Negotiation Base Page Ability
- * Register (Address 5) to determine how flow control was
- * negotiated.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
- &mii_nway_adv_reg);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
- &mii_nway_lp_ability_reg);
- if (ret_val)
- return ret_val;
-
- /* Two bits in the Auto Negotiation Advertisement Register
- * (Address 4) and two bits in the Auto Negotiation Base
- * Page Ability Register (Address 5) determine flow control
- * for both the PHY and the link partner. The following
- * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
- * 1999, describes these PAUSE resolution bits and how flow
- * control is determined based upon these settings.
- * NOTE: DC = Don't Care
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
- *-------|---------|-------|---------|--------------------
- * 0 | 0 | DC | DC | E1000_FC_NONE
- * 0 | 1 | 0 | DC | E1000_FC_NONE
- * 0 | 1 | 1 | 0 | E1000_FC_NONE
- * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
- * 1 | 0 | 0 | DC | E1000_FC_NONE
- * 1 | DC | 1 | DC | E1000_FC_FULL
- * 1 | 1 | 0 | 0 | E1000_FC_NONE
- * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
- *
- */
- /* Are both PAUSE bits set to 1? If so, this implies
- * Symmetric Flow Control is enabled at both ends. The
- * ASM_DIR bits are irrelevant per the spec.
- *
- * For Symmetric Flow Control:
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | DC | 1 | DC | E1000_FC_FULL
- *
- */
- if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
- /* Now we need to check if the user selected RX ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
- */
- if (hw->original_fc == E1000_FC_FULL) {
- hw->fc = E1000_FC_FULL;
- e_dbg("Flow Control = FULL.\n");
- } else {
- hw->fc = E1000_FC_RX_PAUSE;
- e_dbg
- ("Flow Control = RX PAUSE frames only.\n");
- }
- }
- /* For receiving PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
- *
- */
- else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
- hw->fc = E1000_FC_TX_PAUSE;
- e_dbg
- ("Flow Control = TX PAUSE frames only.\n");
- }
- /* For transmitting PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
- *
- */
- else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
- {
- hw->fc = E1000_FC_RX_PAUSE;
- e_dbg
- ("Flow Control = RX PAUSE frames only.\n");
- }
- /* Per the IEEE spec, at this point flow control should be
- * disabled. However, we want to consider that we could
- * be connected to a legacy switch that doesn't advertise
- * desired flow control, but can be forced on the link
- * partner. So if we advertised no flow control, that is
- * what we will resolve to. If we advertised some kind of
- * receive capability (Rx Pause Only or Full Flow Control)
- * and the link partner advertised none, we will configure
- * ourselves to enable Rx Flow Control only. We can do
- * this safely for two reasons: If the link partner really
- * didn't want flow control enabled, and we enable Rx, no
- * harm done since we won't be receiving any PAUSE frames
- * anyway. If the intent on the link partner was to have
- * flow control enabled, then by us enabling RX only, we
- * can at least receive pause frames and process them.
- * This is a good idea because in most cases, since we are
- * predominantly a server NIC, more times than not we will
- * be asked to delay transmission of packets than asking
- * our link partner to pause transmission of frames.
- */
- else if ((hw->original_fc == E1000_FC_NONE ||
- hw->original_fc == E1000_FC_TX_PAUSE) ||
- hw->fc_strict_ieee) {
- hw->fc = E1000_FC_NONE;
- e_dbg("Flow Control = NONE.\n");
- } else {
- hw->fc = E1000_FC_RX_PAUSE;
- e_dbg
- ("Flow Control = RX PAUSE frames only.\n");
- }
-
- /* Now we need to do one last check... If we auto-
- * negotiated to HALF DUPLEX, flow control should not be
- * enabled per IEEE 802.3 spec.
- */
- ret_val =
- e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- e_dbg
- ("Error getting link speed and duplex\n");
- return ret_val;
- }
-
- if (duplex == HALF_DUPLEX)
- hw->fc = E1000_FC_NONE;
-
- /* Now we call a subroutine to actually force the MAC
- * controller to use the correct flow control settings.
- */
- ret_val = e1000_force_mac_fc(hw);
- if (ret_val) {
- e_dbg
- ("Error forcing flow control settings\n");
- return ret_val;
- }
- } else {
- e_dbg
- ("Copper PHY and Auto Neg has not completed.\n");
- }
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_check_for_serdes_link_generic - Check for link (Serdes)
- * @hw: pointer to the HW structure
- *
- * Checks for link up on the hardware. If link is not up and we have
- * a signal, then we need to force link up.
- */
-static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
-{
- u32 rxcw;
- u32 ctrl;
- u32 status;
- s32 ret_val = E1000_SUCCESS;
-
- e_dbg("e1000_check_for_serdes_link_generic");
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
- rxcw = er32(RXCW);
-
- /*
- * If we don't have link (auto-negotiation failed or link partner
- * cannot auto-negotiate), and our link partner is not trying to
- * auto-negotiate with us (we are receiving idles or data),
- * we need to force link up. We also need to give auto-negotiation
- * time to complete.
- */
- /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
- if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
- if (hw->autoneg_failed == 0) {
- hw->autoneg_failed = 1;
- goto out;
- }
- e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
-
- /* Disable auto-negotiation in the TXCW register */
- ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
-
- /* Force link-up and also force full-duplex. */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* Configure Flow Control after forcing link up. */
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error configuring flow control\n");
- goto out;
- }
- } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- /*
- * If we are forcing link and we are receiving /C/ ordered
- * sets, re-enable auto-negotiation in the TXCW register
- * and disable forced link in the Device Control register
- * in an attempt to auto-negotiate with our link partner.
- */
- e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
- ew32(TXCW, hw->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
- hw->serdes_has_link = true;
- } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
- /*
- * If we force link for non-auto-negotiation switch, check
- * link status based on MAC synchronization for internal
- * serdes media type.
- */
- /* SYNCH bit and IV bit are sticky. */
- udelay(10);
- rxcw = er32(RXCW);
- if (rxcw & E1000_RXCW_SYNCH) {
- if (!(rxcw & E1000_RXCW_IV)) {
- hw->serdes_has_link = true;
- e_dbg("SERDES: Link up - forced.\n");
- }
- } else {
- hw->serdes_has_link = false;
- e_dbg("SERDES: Link down - force failed.\n");
- }
- }
-
- if (E1000_TXCW_ANE & er32(TXCW)) {
- status = er32(STATUS);
- if (status & E1000_STATUS_LU) {
- /* SYNCH bit and IV bit are sticky, so reread rxcw. */
- udelay(10);
- rxcw = er32(RXCW);
- if (rxcw & E1000_RXCW_SYNCH) {
- if (!(rxcw & E1000_RXCW_IV)) {
- hw->serdes_has_link = true;
- e_dbg("SERDES: Link up - autoneg "
- "completed successfully.\n");
- } else {
- hw->serdes_has_link = false;
- e_dbg("SERDES: Link down - invalid"
- "codewords detected in autoneg.\n");
- }
- } else {
- hw->serdes_has_link = false;
- e_dbg("SERDES: Link down - no sync.\n");
- }
- } else {
- hw->serdes_has_link = false;
- e_dbg("SERDES: Link down - autoneg failed\n");
- }
- }
-
- out:
- return ret_val;
-}
-
-/**
- * e1000_check_for_link
- * @hw: Struct containing variables accessed by shared code
- *
- * Checks to see if the link status of the hardware has changed.
- * Called by any function that needs to check the link status of the adapter.
- */
-s32 e1000_check_for_link(struct e1000_hw *hw)
-{
- u32 rxcw = 0;
- u32 ctrl;
- u32 status;
- u32 rctl;
- u32 icr;
- u32 signal = 0;
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_check_for_link");
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
-
- /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
- * set when the optics detect a signal. On older adapters, it will be
- * cleared when there is a signal. This applies to fiber media only.
- */
- if ((hw->media_type == e1000_media_type_fiber) ||
- (hw->media_type == e1000_media_type_internal_serdes)) {
- rxcw = er32(RXCW);
-
- if (hw->media_type == e1000_media_type_fiber) {
- signal =
- (hw->mac_type >
- e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
- if (status & E1000_STATUS_LU)
- hw->get_link_status = false;
- }
- }
-
- /* If we have a copper PHY then we only want to go out to the PHY
- * registers to see if Auto-Neg has completed and/or if our link
- * status has changed. The get_link_status flag will be set if we
- * receive a Link Status Change interrupt or we have Rx Sequence
- * Errors.
- */
- if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
- /* First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
- * of the PHY.
- * Read the register twice since the link bit is sticky.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (phy_data & MII_SR_LINK_STATUS) {
- hw->get_link_status = false;
- /* Check if there was DownShift, must be checked immediately after
- * link-up */
- e1000_check_downshift(hw);
-
- /* If we are on 82544 or 82543 silicon and speed/duplex
- * are forced to 10H or 10F, then we will implement the polarity
- * reversal workaround. We disable interrupts first, and upon
- * returning, place the devices interrupt state to its previous
- * value except for the link status change interrupt which will
- * happen due to the execution of this workaround.
- */
-
- if ((hw->mac_type == e1000_82544
- || hw->mac_type == e1000_82543) && (!hw->autoneg)
- && (hw->forced_speed_duplex == e1000_10_full
- || hw->forced_speed_duplex == e1000_10_half)) {
- ew32(IMC, 0xffffffff);
- ret_val =
- e1000_polarity_reversal_workaround(hw);
- icr = er32(ICR);
- ew32(ICS, (icr & ~E1000_ICS_LSC));
- ew32(IMS, IMS_ENABLE_MASK);
- }
-
- } else {
- /* No link detected */
- e1000_config_dsp_after_link_change(hw, false);
- return 0;
- }
-
- /* If we are forcing speed/duplex, then we simply return since
- * we have already determined whether we have link or not.
- */
- if (!hw->autoneg)
- return -E1000_ERR_CONFIG;
-
- /* optimize the dsp settings for the igp phy */
- e1000_config_dsp_after_link_change(hw, true);
-
- /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
- * have Si on board that is 82544 or newer, Auto
- * Speed Detection takes care of MAC speed/duplex
- * configuration. So we only need to configure Collision
- * Distance in the MAC. Otherwise, we need to force
- * speed/duplex on the MAC to the current PHY speed/duplex
- * settings.
- */
- if ((hw->mac_type >= e1000_82544) &&
- (hw->mac_type != e1000_ce4100))
- e1000_config_collision_dist(hw);
- else {
- ret_val = e1000_config_mac_to_phy(hw);
- if (ret_val) {
- e_dbg
- ("Error configuring MAC to PHY settings\n");
- return ret_val;
- }
- }
-
- /* Configure Flow Control now that Auto-Neg has completed. First, we
- * need to restore the desired flow control settings because we may
- * have had to re-autoneg with a different link partner.
- */
- ret_val = e1000_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error configuring flow control\n");
- return ret_val;
- }
-
- /* At this point we know that we are on copper and we have
- * auto-negotiated link. These are conditions for checking the link
- * partner capability register. We use the link speed to determine if
- * TBI compatibility needs to be turned on or off. If the link is not
- * at gigabit speed, then TBI compatibility is not needed. If we are
- * at gigabit speed, we turn on TBI compatibility.
- */
- if (hw->tbi_compatibility_en) {
- u16 speed, duplex;
- ret_val =
- e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- e_dbg
- ("Error getting link speed and duplex\n");
- return ret_val;
- }
- if (speed != SPEED_1000) {
- /* If link speed is not set to gigabit speed, we do not need
- * to enable TBI compatibility.
- */
- if (hw->tbi_compatibility_on) {
- /* If we previously were in the mode, turn it off. */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_SBP;
- ew32(RCTL, rctl);
- hw->tbi_compatibility_on = false;
- }
- } else {
- /* If TBI compatibility is was previously off, turn it on. For
- * compatibility with a TBI link partner, we will store bad
- * packets. Some frames have an additional byte on the end and
- * will look like CRC errors to to the hardware.
- */
- if (!hw->tbi_compatibility_on) {
- hw->tbi_compatibility_on = true;
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_SBP;
- ew32(RCTL, rctl);
- }
- }
- }
- }
-
- if ((hw->media_type == e1000_media_type_fiber) ||
- (hw->media_type == e1000_media_type_internal_serdes))
- e1000_check_for_serdes_link_generic(hw);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_get_speed_and_duplex
- * @hw: Struct containing variables accessed by shared code
- * @speed: Speed of the connection
- * @duplex: Duplex setting of the connection
-
- * Detects the current speed and duplex settings of the hardware.
- */
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
- u32 status;
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_get_speed_and_duplex");
-
- if (hw->mac_type >= e1000_82543) {
- status = er32(STATUS);
- if (status & E1000_STATUS_SPEED_1000) {
- *speed = SPEED_1000;
- e_dbg("1000 Mbs, ");
- } else if (status & E1000_STATUS_SPEED_100) {
- *speed = SPEED_100;
- e_dbg("100 Mbs, ");
- } else {
- *speed = SPEED_10;
- e_dbg("10 Mbs, ");
- }
-
- if (status & E1000_STATUS_FD) {
- *duplex = FULL_DUPLEX;
- e_dbg("Full Duplex\n");
- } else {
- *duplex = HALF_DUPLEX;
- e_dbg(" Half Duplex\n");
- }
- } else {
- e_dbg("1000 Mbs, Full Duplex\n");
- *speed = SPEED_1000;
- *duplex = FULL_DUPLEX;
- }
-
- /* IGP01 PHY may advertise full duplex operation after speed downgrade even
- * if it is operating at half duplex. Here we set the duplex settings to
- * match the duplex in the link partner's capabilities.
- */
- if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
- ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
- if (ret_val)
- return ret_val;
-
- if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
- *duplex = HALF_DUPLEX;
- else {
- ret_val =
- e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
- if (ret_val)
- return ret_val;
- if ((*speed == SPEED_100
- && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
- || (*speed == SPEED_10
- && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
- *duplex = HALF_DUPLEX;
- }
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_wait_autoneg
- * @hw: Struct containing variables accessed by shared code
- *
- * Blocks until autoneg completes or times out (~4.5 seconds)
- */
-static s32 e1000_wait_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 i;
- u16 phy_data;
-
- e_dbg("e1000_wait_autoneg");
- e_dbg("Waiting for Auto-Neg to complete.\n");
-
- /* We will wait for autoneg to complete or 4.5 seconds to expire. */
- for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Auto-Neg
- * Complete bit to be set.
- */
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
- if (phy_data & MII_SR_AUTONEG_COMPLETE) {
- return E1000_SUCCESS;
- }
- msleep(100);
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_raise_mdi_clk - Raises the Management Data Clock
- * @hw: Struct containing variables accessed by shared code
- * @ctrl: Device control register's current value
- */
-static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
-{
- /* Raise the clock input to the Management Data Clock (by setting the MDC
- * bit), and then delay 10 microseconds.
- */
- ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
- E1000_WRITE_FLUSH();
- udelay(10);
-}
-
-/**
- * e1000_lower_mdi_clk - Lowers the Management Data Clock
- * @hw: Struct containing variables accessed by shared code
- * @ctrl: Device control register's current value
- */
-static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
-{
- /* Lower the clock input to the Management Data Clock (by clearing the MDC
- * bit), and then delay 10 microseconds.
- */
- ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
- E1000_WRITE_FLUSH();
- udelay(10);
-}
-
-/**
- * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
- * @hw: Struct containing variables accessed by shared code
- * @data: Data to send out to the PHY
- * @count: Number of bits to shift out
- *
- * Bits are shifted out in MSB to LSB order.
- */
-static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
-{
- u32 ctrl;
- u32 mask;
-
- /* We need to shift "count" number of bits out to the PHY. So, the value
- * in the "data" parameter will be shifted out to the PHY one bit at a
- * time. In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01;
- mask <<= (count - 1);
-
- ctrl = er32(CTRL);
-
- /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
- ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
-
- while (mask) {
- /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
- * then raising and lowering the Management Data Clock. A "0" is
- * shifted out to the PHY by setting the MDIO bit to "0" and then
- * raising and lowering the clock.
- */
- if (data & mask)
- ctrl |= E1000_CTRL_MDIO;
- else
- ctrl &= ~E1000_CTRL_MDIO;
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- udelay(10);
-
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- mask = mask >> 1;
- }
-}
-
-/**
- * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
- * @hw: Struct containing variables accessed by shared code
- *
- * Bits are shifted in in MSB to LSB order.
- */
-static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
-{
- u32 ctrl;
- u16 data = 0;
- u8 i;
-
- /* In order to read a register from the PHY, we need to shift in a total
- * of 18 bits from the PHY. The first two bit (turnaround) times are used
- * to avoid contention on the MDIO pin when a read operation is performed.
- * These two bits are ignored by us and thrown away. Bits are "shifted in"
- * by raising the input to the Management Data Clock (setting the MDC bit),
- * and then reading the value of the MDIO bit.
- */
- ctrl = er32(CTRL);
-
- /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
- ctrl &= ~E1000_CTRL_MDIO_DIR;
- ctrl &= ~E1000_CTRL_MDIO;
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- /* Raise and Lower the clock before reading in the data. This accounts for
- * the turnaround bits. The first clock occurred when we clocked out the
- * last bit of the Register Address.
- */
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- for (data = 0, i = 0; i < 16; i++) {
- data = data << 1;
- e1000_raise_mdi_clk(hw, &ctrl);
- ctrl = er32(CTRL);
- /* Check to see if we shifted in a "1". */
- if (ctrl & E1000_CTRL_MDIO)
- data |= 1;
- e1000_lower_mdi_clk(hw, &ctrl);
- }
-
- e1000_raise_mdi_clk(hw, &ctrl);
- e1000_lower_mdi_clk(hw, &ctrl);
-
- return data;
-}
-
-
-/**
- * e1000_read_phy_reg - read a phy register
- * @hw: Struct containing variables accessed by shared code
- * @reg_addr: address of the PHY register to read
- *
- * Reads the value from a PHY register, if the value is on a specific non zero
- * page, sets the page first.
- */
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
-{
- u32 ret_val;
-
- e_dbg("e1000_read_phy_reg");
-
- if ((hw->phy_type == e1000_phy_igp) &&
- (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
- ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16) reg_addr);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- return ret_val;
-}
-
-static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 *phy_data)
-{
- u32 i;
- u32 mdic = 0;
- const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
-
- e_dbg("e1000_read_phy_reg_ex");
-
- if (reg_addr > MAX_PHY_REG_ADDRESS) {
- e_dbg("PHY Address %d is out of range\n", reg_addr);
- return -E1000_ERR_PARAM;
- }
-
- if (hw->mac_type > e1000_82543) {
- /* Set up Op-code, Phy Address, and register address in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- if (hw->mac_type == e1000_ce4100) {
- mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (INTEL_CE_GBE_MDIC_OP_READ) |
- (INTEL_CE_GBE_MDIC_GO));
-
- writel(mdic, E1000_MDIO_CMD);
-
- /* Poll the ready bit to see if the MDI read
- * completed
- */
- for (i = 0; i < 64; i++) {
- udelay(50);
- mdic = readl(E1000_MDIO_CMD);
- if (!(mdic & INTEL_CE_GBE_MDIC_GO))
- break;
- }
-
- if (mdic & INTEL_CE_GBE_MDIC_GO) {
- e_dbg("MDI Read did not complete\n");
- return -E1000_ERR_PHY;
- }
-
- mdic = readl(E1000_MDIO_STS);
- if (mdic & INTEL_CE_GBE_MDIC_READ_ERROR) {
- e_dbg("MDI Read Error\n");
- return -E1000_ERR_PHY;
- }
- *phy_data = (u16) mdic;
- } else {
- mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
-
- ew32(MDIC, mdic);
-
- /* Poll the ready bit to see if the MDI read
- * completed
- */
- for (i = 0; i < 64; i++) {
- udelay(50);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- e_dbg("MDI Read did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (mdic & E1000_MDIC_ERROR) {
- e_dbg("MDI Error\n");
- return -E1000_ERR_PHY;
- }
- *phy_data = (u16) mdic;
- }
- } else {
- /* We must first send a preamble through the MDIO pin to signal the
- * beginning of an MII instruction. This is done by sending 32
- * consecutive "1" bits.
- */
- e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
- /* Now combine the next few fields that are required for a read
- * operation. We use this method instead of calling the
- * e1000_shift_out_mdi_bits routine five different times. The format of
- * a MII read instruction consists of a shift out of 14 bits and is
- * defined as follows:
- * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
- * followed by a shift in of 18 bits. This first two bits shifted in
- * are TurnAround bits used to avoid contention on the MDIO pin when a
- * READ operation is performed. These two bits are thrown away
- * followed by a shift in of 16 bits which contains the desired data.
- */
- mdic = ((reg_addr) | (phy_addr << 5) |
- (PHY_OP_READ << 10) | (PHY_SOF << 12));
-
- e1000_shift_out_mdi_bits(hw, mdic, 14);
-
- /* Now that we've shifted out the read command to the MII, we need to
- * "shift in" the 16-bit value (18 total bits) of the requested PHY
- * register address.
- */
- *phy_data = e1000_shift_in_mdi_bits(hw);
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_write_phy_reg - write a phy register
- *
- * @hw: Struct containing variables accessed by shared code
- * @reg_addr: address of the PHY register to write
- * @data: data to write to the PHY
-
- * Writes a value to a PHY register
- */
-s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
-{
- u32 ret_val;
-
- e_dbg("e1000_write_phy_reg");
-
- if ((hw->phy_type == e1000_phy_igp) &&
- (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
- ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
- (u16) reg_addr);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
- phy_data);
-
- return ret_val;
-}
-
-static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
- u16 phy_data)
-{
- u32 i;
- u32 mdic = 0;
- const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
-
- e_dbg("e1000_write_phy_reg_ex");
-
- if (reg_addr > MAX_PHY_REG_ADDRESS) {
- e_dbg("PHY Address %d is out of range\n", reg_addr);
- return -E1000_ERR_PARAM;
- }
-
- if (hw->mac_type > e1000_82543) {
- /* Set up Op-code, Phy Address, register address, and data
- * intended for the PHY register in the MDI Control register.
- * The MAC will take care of interfacing with the PHY to send
- * the desired data.
- */
- if (hw->mac_type == e1000_ce4100) {
- mdic = (((u32) phy_data) |
- (reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (INTEL_CE_GBE_MDIC_OP_WRITE) |
- (INTEL_CE_GBE_MDIC_GO));
-
- writel(mdic, E1000_MDIO_CMD);
-
- /* Poll the ready bit to see if the MDI read
- * completed
- */
- for (i = 0; i < 640; i++) {
- udelay(5);
- mdic = readl(E1000_MDIO_CMD);
- if (!(mdic & INTEL_CE_GBE_MDIC_GO))
- break;
- }
- if (mdic & INTEL_CE_GBE_MDIC_GO) {
- e_dbg("MDI Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- } else {
- mdic = (((u32) phy_data) |
- (reg_addr << E1000_MDIC_REG_SHIFT) |
- (phy_addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
-
- ew32(MDIC, mdic);
-
- /* Poll the ready bit to see if the MDI read
- * completed
- */
- for (i = 0; i < 641; i++) {
- udelay(5);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- e_dbg("MDI Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- }
- } else {
- /* We'll need to use the SW defined pins to shift the write command
- * out to the PHY. We first send a preamble to the PHY to signal the
- * beginning of the MII instruction. This is done by sending 32
- * consecutive "1" bits.
- */
- e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
-
- /* Now combine the remaining required fields that will indicate a
- * write operation. We use this method instead of calling the
- * e1000_shift_out_mdi_bits routine for each field in the command. The
- * format of a MII write instruction is as follows:
- * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
- */
- mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
- (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
- mdic <<= 16;
- mdic |= (u32) phy_data;
-
- e1000_shift_out_mdi_bits(hw, mdic, 32);
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_hw_reset - reset the phy, hardware style
- * @hw: Struct containing variables accessed by shared code
- *
- * Returns the PHY to the power-on reset state
- */
-s32 e1000_phy_hw_reset(struct e1000_hw *hw)
-{
- u32 ctrl, ctrl_ext;
- u32 led_ctrl;
-
- e_dbg("e1000_phy_hw_reset");
-
- e_dbg("Resetting Phy...\n");
-
- if (hw->mac_type > e1000_82543) {
- /* Read the device control register and assert the E1000_CTRL_PHY_RST
- * bit. Then, take it out of reset.
- * For e1000 hardware, we delay for 10ms between the assert
- * and deassert.
- */
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
- E1000_WRITE_FLUSH();
-
- msleep(10);
-
- ew32(CTRL, ctrl);
- E1000_WRITE_FLUSH();
-
- } else {
- /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
- * bit to put the PHY into reset. Then, take it out of reset.
- */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
- ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- msleep(10);
- ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- E1000_WRITE_FLUSH();
- }
- udelay(150);
-
- if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
- /* Configure activity LED after PHY reset */
- led_ctrl = er32(LEDCTL);
- led_ctrl &= IGP_ACTIVITY_LED_MASK;
- led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
- ew32(LEDCTL, led_ctrl);
- }
-
- /* Wait for FW to finish PHY configuration. */
- return e1000_get_phy_cfg_done(hw);
-}
-
-/**
- * e1000_phy_reset - reset the phy to commit settings
- * @hw: Struct containing variables accessed by shared code
- *
- * Resets the PHY
- * Sets bit 15 of the MII Control register
- */
-s32 e1000_phy_reset(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_phy_reset");
-
- switch (hw->phy_type) {
- case e1000_phy_igp:
- ret_val = e1000_phy_hw_reset(hw);
- if (ret_val)
- return ret_val;
- break;
- default:
- ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= MII_CR_RESET;
- ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- udelay(1);
- break;
- }
-
- if (hw->phy_type == e1000_phy_igp)
- e1000_phy_init_script(hw);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_detect_gig_phy - check the phy type
- * @hw: Struct containing variables accessed by shared code
- *
- * Probes the expected PHY address for known PHY IDs
- */
-static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
-{
- s32 phy_init_status, ret_val;
- u16 phy_id_high, phy_id_low;
- bool match = false;
-
- e_dbg("e1000_detect_gig_phy");
-
- if (hw->phy_id != 0)
- return E1000_SUCCESS;
-
- /* Read the PHY ID Registers to identify which PHY is onboard. */
- ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
- if (ret_val)
- return ret_val;
-
- hw->phy_id = (u32) (phy_id_high << 16);
- udelay(20);
- ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
- if (ret_val)
- return ret_val;
-
- hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
- hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
-
- switch (hw->mac_type) {
- case e1000_82543:
- if (hw->phy_id == M88E1000_E_PHY_ID)
- match = true;
- break;
- case e1000_82544:
- if (hw->phy_id == M88E1000_I_PHY_ID)
- match = true;
- break;
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_82546_rev_3:
- if (hw->phy_id == M88E1011_I_PHY_ID)
- match = true;
- break;
- case e1000_ce4100:
- if ((hw->phy_id == RTL8211B_PHY_ID) ||
- (hw->phy_id == RTL8201N_PHY_ID) ||
- (hw->phy_id == M88E1118_E_PHY_ID))
- match = true;
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- if (hw->phy_id == IGP01E1000_I_PHY_ID)
- match = true;
- break;
- default:
- e_dbg("Invalid MAC type %d\n", hw->mac_type);
- return -E1000_ERR_CONFIG;
- }
- phy_init_status = e1000_set_phy_type(hw);
-
- if ((match) && (phy_init_status == E1000_SUCCESS)) {
- e_dbg("PHY ID 0x%X detected\n", hw->phy_id);
- return E1000_SUCCESS;
- }
- e_dbg("Invalid PHY ID 0x%X\n", hw->phy_id);
- return -E1000_ERR_PHY;
-}
-
-/**
- * e1000_phy_reset_dsp - reset DSP
- * @hw: Struct containing variables accessed by shared code
- *
- * Resets the PHY's DSP
- */
-static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
-{
- s32 ret_val;
- e_dbg("e1000_phy_reset_dsp");
-
- do {
- ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
- if (ret_val)
- break;
- ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
- if (ret_val)
- break;
- ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
- if (ret_val)
- break;
- ret_val = E1000_SUCCESS;
- } while (0);
-
- return ret_val;
-}
-
-/**
- * e1000_phy_igp_get_info - get igp specific registers
- * @hw: Struct containing variables accessed by shared code
- * @phy_info: PHY information structure
- *
- * Get PHY information from various PHY registers for igp PHY only.
- */
-static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data, min_length, max_length, average;
- e1000_rev_polarity polarity;
-
- e_dbg("e1000_phy_igp_get_info");
-
- /* The downshift status is checked only once, after link is established,
- * and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
-
- /* IGP01E1000 does not need to support it. */
- phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
-
- /* IGP01E1000 always correct polarity reversal */
- phy_info->polarity_correction = e1000_polarity_reversal_enabled;
-
- /* Check polarity status */
- ret_val = e1000_check_polarity(hw, &polarity);
- if (ret_val)
- return ret_val;
-
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->mdix_mode =
- (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
- IGP01E1000_PSSR_MDIX_SHIFT);
-
- if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- /* Local/Remote Receiver Information are only valid at 1000 Mbps */
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
- SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
- phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
- SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
- /* Get cable length */
- ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
- if (ret_val)
- return ret_val;
-
- /* Translate to old method */
- average = (max_length + min_length) / 2;
-
- if (average <= e1000_igp_cable_length_50)
- phy_info->cable_length = e1000_cable_length_50;
- else if (average <= e1000_igp_cable_length_80)
- phy_info->cable_length = e1000_cable_length_50_80;
- else if (average <= e1000_igp_cable_length_110)
- phy_info->cable_length = e1000_cable_length_80_110;
- else if (average <= e1000_igp_cable_length_140)
- phy_info->cable_length = e1000_cable_length_110_140;
- else
- phy_info->cable_length = e1000_cable_length_140;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_m88_get_info - get m88 specific registers
- * @hw: Struct containing variables accessed by shared code
- * @phy_info: PHY information structure
- *
- * Get PHY information from various PHY registers for m88 PHY only.
- */
-static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
- struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data;
- e1000_rev_polarity polarity;
-
- e_dbg("e1000_phy_m88_get_info");
-
- /* The downshift status is checked only once, after link is established,
- * and it stored in the hw->speed_downgraded parameter. */
- phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->extended_10bt_distance =
- ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
- M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
- e1000_10bt_ext_dist_enable_lower :
- e1000_10bt_ext_dist_enable_normal;
-
- phy_info->polarity_correction =
- ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
- M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
- e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
-
- /* Check polarity status */
- ret_val = e1000_check_polarity(hw, &polarity);
- if (ret_val)
- return ret_val;
- phy_info->cable_polarity = polarity;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->mdix_mode =
- (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
- M88E1000_PSSR_MDIX_SHIFT);
-
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
- /* Cable Length Estimation and Local/Remote Receiver Information
- * are only valid at 1000 Mbps.
- */
- phy_info->cable_length =
- (e1000_cable_length) ((phy_data &
- M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT);
-
- ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
- SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
- phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
- SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
- e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
-
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_phy_get_info - request phy info
- * @hw: Struct containing variables accessed by shared code
- * @phy_info: PHY information structure
- *
- * Get PHY information from various PHY registers
- */
-s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_phy_get_info");
-
- phy_info->cable_length = e1000_cable_length_undefined;
- phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
- phy_info->cable_polarity = e1000_rev_polarity_undefined;
- phy_info->downshift = e1000_downshift_undefined;
- phy_info->polarity_correction = e1000_polarity_reversal_undefined;
- phy_info->mdix_mode = e1000_auto_x_mode_undefined;
- phy_info->local_rx = e1000_1000t_rx_status_undefined;
- phy_info->remote_rx = e1000_1000t_rx_status_undefined;
-
- if (hw->media_type != e1000_media_type_copper) {
- e_dbg("PHY info is only valid for copper media\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
- e_dbg("PHY info is only valid if link is up\n");
- return -E1000_ERR_CONFIG;
- }
-
- if (hw->phy_type == e1000_phy_igp)
- return e1000_phy_igp_get_info(hw, phy_info);
- else if ((hw->phy_type == e1000_phy_8211) ||
- (hw->phy_type == e1000_phy_8201))
- return E1000_SUCCESS;
- else
- return e1000_phy_m88_get_info(hw, phy_info);
-}
-
-s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
-{
- e_dbg("e1000_validate_mdi_settings");
-
- if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
- e_dbg("Invalid MDI setting detected\n");
- hw->mdix = 1;
- return -E1000_ERR_CONFIG;
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_init_eeprom_params - initialize sw eeprom vars
- * @hw: Struct containing variables accessed by shared code
- *
- * Sets up eeprom variables in the hw struct. Must be called after mac_type
- * is configured.
- */
-s32 e1000_init_eeprom_params(struct e1000_hw *hw)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd = er32(EECD);
- s32 ret_val = E1000_SUCCESS;
- u16 eeprom_size;
-
- e_dbg("e1000_init_eeprom_params");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- eeprom->type = e1000_eeprom_microwire;
- eeprom->word_size = 64;
- eeprom->opcode_bits = 3;
- eeprom->address_bits = 6;
- eeprom->delay_usec = 50;
- break;
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_82546_rev_3:
- eeprom->type = e1000_eeprom_microwire;
- eeprom->opcode_bits = 3;
- eeprom->delay_usec = 50;
- if (eecd & E1000_EECD_SIZE) {
- eeprom->word_size = 256;
- eeprom->address_bits = 8;
- } else {
- eeprom->word_size = 64;
- eeprom->address_bits = 6;
- }
- break;
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- if (eecd & E1000_EECD_TYPE) {
- eeprom->type = e1000_eeprom_spi;
- eeprom->opcode_bits = 8;
- eeprom->delay_usec = 1;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->page_size = 32;
- eeprom->address_bits = 16;
- } else {
- eeprom->page_size = 8;
- eeprom->address_bits = 8;
- }
- } else {
- eeprom->type = e1000_eeprom_microwire;
- eeprom->opcode_bits = 3;
- eeprom->delay_usec = 50;
- if (eecd & E1000_EECD_ADDR_BITS) {
- eeprom->word_size = 256;
- eeprom->address_bits = 8;
- } else {
- eeprom->word_size = 64;
- eeprom->address_bits = 6;
- }
- }
- break;
- default:
- break;
- }
-
- if (eeprom->type == e1000_eeprom_spi) {
- /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
- * 32KB (incremented by powers of 2).
- */
- /* Set to default value for initial eeprom read. */
- eeprom->word_size = 64;
- ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
- if (ret_val)
- return ret_val;
- eeprom_size =
- (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
- /* 256B eeprom size was not supported in earlier hardware, so we
- * bump eeprom_size up one to ensure that "1" (which maps to 256B)
- * is never the result used in the shifting logic below. */
- if (eeprom_size)
- eeprom_size++;
-
- eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
- }
- return ret_val;
-}
-
-/**
- * e1000_raise_ee_clk - Raises the EEPROM's clock input.
- * @hw: Struct containing variables accessed by shared code
- * @eecd: EECD's current value
- */
-static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
-{
- /* Raise the clock input to the EEPROM (by setting the SK bit), and then
- * wait <delay> microseconds.
- */
- *eecd = *eecd | E1000_EECD_SK;
- ew32(EECD, *eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
-}
-
-/**
- * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
- * @hw: Struct containing variables accessed by shared code
- * @eecd: EECD's current value
- */
-static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
-{
- /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd = *eecd & ~E1000_EECD_SK;
- ew32(EECD, *eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
-}
-
-/**
- * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
- * @hw: Struct containing variables accessed by shared code
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
- */
-static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
- u32 mask;
-
- /* We need to shift "count" bits out to the EEPROM. So, value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01 << (count - 1);
- eecd = er32(EECD);
- if (eeprom->type == e1000_eeprom_microwire) {
- eecd &= ~E1000_EECD_DO;
- } else if (eeprom->type == e1000_eeprom_spi) {
- eecd |= E1000_EECD_DO;
- }
- do {
- /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
- * and then raising and then lowering the clock (the SK bit controls
- * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
- * by setting "DI" to "0" and then raising and then lowering the clock.
- */
- eecd &= ~E1000_EECD_DI;
-
- if (data & mask)
- eecd |= E1000_EECD_DI;
-
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
-
- udelay(eeprom->delay_usec);
-
- e1000_raise_ee_clk(hw, &eecd);
- e1000_lower_ee_clk(hw, &eecd);
-
- mask = mask >> 1;
-
- } while (mask);
-
- /* We leave the "DI" bit set to "0" when we leave this routine. */
- eecd &= ~E1000_EECD_DI;
- ew32(EECD, eecd);
-}
-
-/**
- * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
- * @hw: Struct containing variables accessed by shared code
- * @count: number of bits to shift in
- */
-static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
-{
- u32 eecd;
- u32 i;
- u16 data;
-
- /* In order to read a register from the EEPROM, we need to shift 'count'
- * bits in from the EEPROM. Bits are "shifted in" by raising the clock
- * input to the EEPROM (setting the SK bit), and then reading the value of
- * the "DO" bit. During this "shifting in" process the "DI" bit should
- * always be clear.
- */
-
- eecd = er32(EECD);
-
- eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
- data = 0;
-
- for (i = 0; i < count; i++) {
- data = data << 1;
- e1000_raise_ee_clk(hw, &eecd);
-
- eecd = er32(EECD);
-
- eecd &= ~(E1000_EECD_DI);
- if (eecd & E1000_EECD_DO)
- data |= 1;
-
- e1000_lower_ee_clk(hw, &eecd);
- }
-
- return data;
-}
-
-/**
- * e1000_acquire_eeprom - Prepares EEPROM for access
- * @hw: Struct containing variables accessed by shared code
- *
- * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
- * function should be called before issuing a command to the EEPROM.
- */
-static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd, i = 0;
-
- e_dbg("e1000_acquire_eeprom");
-
- eecd = er32(EECD);
-
- /* Request EEPROM Access */
- if (hw->mac_type > e1000_82544) {
- eecd |= E1000_EECD_REQ;
- ew32(EECD, eecd);
- eecd = er32(EECD);
- while ((!(eecd & E1000_EECD_GNT)) &&
- (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
- i++;
- udelay(5);
- eecd = er32(EECD);
- }
- if (!(eecd & E1000_EECD_GNT)) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- e_dbg("Could not acquire EEPROM grant\n");
- return -E1000_ERR_EEPROM;
- }
- }
-
- /* Setup EEPROM for Read/Write */
-
- if (eeprom->type == e1000_eeprom_microwire) {
- /* Clear SK and DI */
- eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
- ew32(EECD, eecd);
-
- /* Set CS */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- } else if (eeprom->type == e1000_eeprom_spi) {
- /* Clear SK and CS */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(1);
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_standby_eeprom - Returns EEPROM to a "standby" state
- * @hw: Struct containing variables accessed by shared code
- */
-static void e1000_standby_eeprom(struct e1000_hw *hw)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
-
- eecd = er32(EECD);
-
- if (eeprom->type == e1000_eeprom_microwire) {
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Clock high */
- eecd |= E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Select EEPROM */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
-
- /* Clock low */
- eecd &= ~E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- } else if (eeprom->type == e1000_eeprom_spi) {
- /* Toggle CS to flush commands */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- eecd &= ~E1000_EECD_CS;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(eeprom->delay_usec);
- }
-}
-
-/**
- * e1000_release_eeprom - drop chip select
- * @hw: Struct containing variables accessed by shared code
- *
- * Terminates a command by inverting the EEPROM's chip select pin
- */
-static void e1000_release_eeprom(struct e1000_hw *hw)
-{
- u32 eecd;
-
- e_dbg("e1000_release_eeprom");
-
- eecd = er32(EECD);
-
- if (hw->eeprom.type == e1000_eeprom_spi) {
- eecd |= E1000_EECD_CS; /* Pull CS high */
- eecd &= ~E1000_EECD_SK; /* Lower SCK */
-
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
-
- udelay(hw->eeprom.delay_usec);
- } else if (hw->eeprom.type == e1000_eeprom_microwire) {
- /* cleanup eeprom */
-
- /* CS on Microwire is active-high */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
-
- ew32(EECD, eecd);
-
- /* Rising edge of clock */
- eecd |= E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
-
- /* Falling edge of clock */
- eecd &= ~E1000_EECD_SK;
- ew32(EECD, eecd);
- E1000_WRITE_FLUSH();
- udelay(hw->eeprom.delay_usec);
- }
-
- /* Stop requesting EEPROM access */
- if (hw->mac_type > e1000_82544) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- }
-}
-
-/**
- * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
- * @hw: Struct containing variables accessed by shared code
- */
-static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
-{
- u16 retry_count = 0;
- u8 spi_stat_reg;
-
- e_dbg("e1000_spi_eeprom_ready");
-
- /* Read "Status Register" repeatedly until the LSB is cleared. The
- * EEPROM will signal that the command has been completed by clearing
- * bit 0 of the internal status register. If it's not cleared within
- * 5 milliseconds, then error out.
- */
- retry_count = 0;
- do {
- e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
- hw->eeprom.opcode_bits);
- spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
- if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- retry_count += 5;
-
- e1000_standby_eeprom(hw);
- } while (retry_count < EEPROM_MAX_RETRY_SPI);
-
- /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
- * only 0-5mSec on 5V devices)
- */
- if (retry_count >= EEPROM_MAX_RETRY_SPI) {
- e_dbg("SPI EEPROM Status error\n");
- return -E1000_ERR_EEPROM;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
- * @hw: Struct containing variables accessed by shared code
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
- * @words: number of words to read
- */
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- s32 ret;
- spin_lock(&e1000_eeprom_lock);
- ret = e1000_do_read_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
- return ret;
-}
-
-static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 i = 0;
-
- e_dbg("e1000_read_eeprom");
-
- if (hw->mac_type == e1000_ce4100) {
- GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
- return E1000_SUCCESS;
- }
-
- /* If eeprom is not yet detected, do so now */
- if (eeprom->word_size == 0)
- e1000_init_eeprom_params(hw);
-
- /* A check for invalid values: offset too large, too many words, and not
- * enough words.
- */
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
- e_dbg("\"words\" parameter out of bounds. Words = %d,"
- "size = %d\n", offset, eeprom->word_size);
- return -E1000_ERR_EEPROM;
- }
-
- /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
- * directly. In this case, we need to acquire the EEPROM so that
- * FW or other port software does not interrupt.
- */
- /* Prepare the EEPROM for bit-bang reading */
- if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
-
- /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
- * acquired the EEPROM at this point, so any returns should release it */
- if (eeprom->type == e1000_eeprom_spi) {
- u16 word_in;
- u8 read_opcode = EEPROM_READ_OPCODE_SPI;
-
- if (e1000_spi_eeprom_ready(hw)) {
- e1000_release_eeprom(hw);
- return -E1000_ERR_EEPROM;
- }
-
- e1000_standby_eeprom(hw);
-
- /* Some SPI eeproms use the 8th address bit embedded in the opcode */
- if ((eeprom->address_bits == 8) && (offset >= 128))
- read_opcode |= EEPROM_A8_OPCODE_SPI;
-
- /* Send the READ command (opcode + addr) */
- e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
- eeprom->address_bits);
-
- /* Read the data. The address of the eeprom internally increments with
- * each byte (spi) being read, saving on the overhead of eeprom setup
- * and tear-down. The address counter will roll over if reading beyond
- * the size of the eeprom, thus allowing the entire memory to be read
- * starting from any offset. */
- for (i = 0; i < words; i++) {
- word_in = e1000_shift_in_ee_bits(hw, 16);
- data[i] = (word_in >> 8) | (word_in << 8);
- }
- } else if (eeprom->type == e1000_eeprom_microwire) {
- for (i = 0; i < words; i++) {
- /* Send the READ command (opcode + addr) */
- e1000_shift_out_ee_bits(hw,
- EEPROM_READ_OPCODE_MICROWIRE,
- eeprom->opcode_bits);
- e1000_shift_out_ee_bits(hw, (u16) (offset + i),
- eeprom->address_bits);
-
- /* Read the data. For microwire, each word requires the overhead
- * of eeprom setup and tear-down. */
- data[i] = e1000_shift_in_ee_bits(hw, 16);
- e1000_standby_eeprom(hw);
- }
- }
-
- /* End this read operation */
- e1000_release_eeprom(hw);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
- * @hw: Struct containing variables accessed by shared code
- *
- * Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
- * valid.
- */
-s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
-{
- u16 checksum = 0;
- u16 i, eeprom_data;
-
- e_dbg("e1000_validate_eeprom_checksum");
-
- for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
- if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- checksum += eeprom_data;
- }
-
- if (checksum == (u16) EEPROM_SUM)
- return E1000_SUCCESS;
- else {
- e_dbg("EEPROM Checksum Invalid\n");
- return -E1000_ERR_EEPROM;
- }
-}
-
-/**
- * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
- * @hw: Struct containing variables accessed by shared code
- *
- * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
- * Writes the difference to word offset 63 of the EEPROM.
- */
-s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
-{
- u16 checksum = 0;
- u16 i, eeprom_data;
-
- e_dbg("e1000_update_eeprom_checksum");
-
- for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
- if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- checksum += eeprom_data;
- }
- checksum = (u16) EEPROM_SUM - checksum;
- if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
- e_dbg("EEPROM Write Error\n");
- return -E1000_ERR_EEPROM;
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_write_eeprom - write words to the different EEPROM types.
- * @hw: Struct containing variables accessed by shared code
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word to be written to the EEPROM
- *
- * If e1000_update_eeprom_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- */
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- s32 ret;
- spin_lock(&e1000_eeprom_lock);
- ret = e1000_do_write_eeprom(hw, offset, words, data);
- spin_unlock(&e1000_eeprom_lock);
- return ret;
-}
-
-static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- s32 status = 0;
-
- e_dbg("e1000_write_eeprom");
-
- if (hw->mac_type == e1000_ce4100) {
- GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
- data);
- return E1000_SUCCESS;
- }
-
- /* If eeprom is not yet detected, do so now */
- if (eeprom->word_size == 0)
- e1000_init_eeprom_params(hw);
-
- /* A check for invalid values: offset too large, too many words, and not
- * enough words.
- */
- if ((offset >= eeprom->word_size)
- || (words > eeprom->word_size - offset) || (words == 0)) {
- e_dbg("\"words\" parameter out of bounds\n");
- return -E1000_ERR_EEPROM;
- }
-
- /* Prepare the EEPROM for writing */
- if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
- return -E1000_ERR_EEPROM;
-
- if (eeprom->type == e1000_eeprom_microwire) {
- status = e1000_write_eeprom_microwire(hw, offset, words, data);
- } else {
- status = e1000_write_eeprom_spi(hw, offset, words, data);
- msleep(10);
- }
-
- /* Done with writing */
- e1000_release_eeprom(hw);
-
- return status;
-}
-
-/**
- * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
- * @hw: Struct containing variables accessed by shared code
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: pointer to array of 8 bit words to be written to the EEPROM
- */
-static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u16 widx = 0;
-
- e_dbg("e1000_write_eeprom_spi");
-
- while (widx < words) {
- u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
-
- if (e1000_spi_eeprom_ready(hw))
- return -E1000_ERR_EEPROM;
-
- e1000_standby_eeprom(hw);
-
- /* Send the WRITE ENABLE command (8 bit opcode ) */
- e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
- eeprom->opcode_bits);
-
- e1000_standby_eeprom(hw);
-
- /* Some SPI eeproms use the 8th address bit embedded in the opcode */
- if ((eeprom->address_bits == 8) && (offset >= 128))
- write_opcode |= EEPROM_A8_OPCODE_SPI;
-
- /* Send the Write command (8-bit opcode + addr) */
- e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
-
- e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
- eeprom->address_bits);
-
- /* Send the data */
-
- /* Loop to allow for up to whole page write (32 bytes) of eeprom */
- while (widx < words) {
- u16 word_out = data[widx];
- word_out = (word_out >> 8) | (word_out << 8);
- e1000_shift_out_ee_bits(hw, word_out, 16);
- widx++;
-
- /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
- * operation, while the smaller eeproms are capable of an 8-byte
- * PAGE WRITE operation. Break the inner loop to pass new address
- */
- if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
- e1000_standby_eeprom(hw);
- break;
- }
- }
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
- * @hw: Struct containing variables accessed by shared code
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: pointer to array of 8 bit words to be written to the EEPROM
- */
-static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- struct e1000_eeprom_info *eeprom = &hw->eeprom;
- u32 eecd;
- u16 words_written = 0;
- u16 i = 0;
-
- e_dbg("e1000_write_eeprom_microwire");
-
- /* Send the write enable command to the EEPROM (3-bit opcode plus
- * 6/8-bit dummy address beginning with 11). It's less work to include
- * the 11 of the dummy address as part of the opcode than it is to shift
- * it over the correct number of bits for the address. This puts the
- * EEPROM into write/erase mode.
- */
- e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
-
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
-
- /* Prepare the EEPROM */
- e1000_standby_eeprom(hw);
-
- while (words_written < words) {
- /* Send the Write command (3-bit opcode + addr) */
- e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
- eeprom->opcode_bits);
-
- e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
- eeprom->address_bits);
-
- /* Send the data */
- e1000_shift_out_ee_bits(hw, data[words_written], 16);
-
- /* Toggle the CS line. This in effect tells the EEPROM to execute
- * the previous command.
- */
- e1000_standby_eeprom(hw);
-
- /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
- * signal that the command has been completed by raising the DO signal.
- * If DO does not go high in 10 milliseconds, then error out.
- */
- for (i = 0; i < 200; i++) {
- eecd = er32(EECD);
- if (eecd & E1000_EECD_DO)
- break;
- udelay(50);
- }
- if (i == 200) {
- e_dbg("EEPROM Write did not complete\n");
- return -E1000_ERR_EEPROM;
- }
-
- /* Recover from write */
- e1000_standby_eeprom(hw);
-
- words_written++;
- }
-
- /* Send the write disable command to the EEPROM (3-bit opcode plus
- * 6/8-bit dummy address beginning with 10). It's less work to include
- * the 10 of the dummy address as part of the opcode than it is to shift
- * it over the correct number of bits for the address. This takes the
- * EEPROM out of write/erase mode.
- */
- e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
- (u16) (eeprom->opcode_bits + 2));
-
- e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_read_mac_addr - read the adapters MAC from eeprom
- * @hw: Struct containing variables accessed by shared code
- *
- * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
- * second function of dual function devices
- */
-s32 e1000_read_mac_addr(struct e1000_hw *hw)
-{
- u16 offset;
- u16 eeprom_data, i;
-
- e_dbg("e1000_read_mac_addr");
-
- for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
- offset = i >> 1;
- if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
- hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
- hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
- }
-
- switch (hw->mac_type) {
- default:
- break;
- case e1000_82546:
- case e1000_82546_rev_3:
- if (er32(STATUS) & E1000_STATUS_FUNC_1)
- hw->perm_mac_addr[5] ^= 0x01;
- break;
- }
-
- for (i = 0; i < NODE_ADDRESS_SIZE; i++)
- hw->mac_addr[i] = hw->perm_mac_addr[i];
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_init_rx_addrs - Initializes receive address filters.
- * @hw: Struct containing variables accessed by shared code
- *
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- */
-static void e1000_init_rx_addrs(struct e1000_hw *hw)
-{
- u32 i;
- u32 rar_num;
-
- e_dbg("e1000_init_rx_addrs");
-
- /* Setup the receive address. */
- e_dbg("Programming MAC Address into RAR[0]\n");
-
- e1000_rar_set(hw, hw->mac_addr, 0);
-
- rar_num = E1000_RAR_ENTRIES;
-
- /* Zero out the other 15 receive addresses. */
- e_dbg("Clearing RAR[1-15]\n");
- for (i = 1; i < rar_num; i++) {
- E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- E1000_WRITE_FLUSH();
- }
-}
-
-/**
- * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
- * @hw: Struct containing variables accessed by shared code
- * @mc_addr: the multicast address to hash
- */
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
-{
- u32 hash_value = 0;
-
- /* The portion of the address that is used for the hash table is
- * determined by the mc_filter_type setting.
- */
- switch (hw->mc_filter_type) {
- /* [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB
- */
- case 0:
- /* [47:36] i.e. 0x563 for above example address */
- hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
- break;
- case 1:
- /* [46:35] i.e. 0xAC6 for above example address */
- hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
- break;
- case 2:
- /* [45:34] i.e. 0x5D8 for above example address */
- hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
- break;
- case 3:
- /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
- break;
- }
-
- hash_value &= 0xFFF;
- return hash_value;
-}
-
-/**
- * e1000_rar_set - Puts an ethernet address into a receive address register.
- * @hw: Struct containing variables accessed by shared code
- * @addr: Address to put into receive address register
- * @index: Receive address register to write
- */
-void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
-{
- u32 rar_low, rar_high;
-
- /* HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
- /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
- * unit hang.
- *
- * Description:
- * If there are any Rx frames queued up or otherwise present in the HW
- * before RSS is enabled, and then we enable RSS, the HW Rx unit will
- * hang. To work around this issue, we have to disable receives and
- * flush out all Rx frames before we enable RSS. To do so, we modify we
- * redirect all Rx traffic to manageability and then reset the HW.
- * This flushes away Rx frames, and (since the redirections to
- * manageability persists across resets) keeps new ones from coming in
- * while we work. Then, we clear the Address Valid AV bit for all MAC
- * addresses and undo the re-direction to manageability.
- * Now, frames are coming in again, but the MAC won't accept them, so
- * far so good. We now proceed to initialize RSS (if necessary) and
- * configure the Rx unit. Last, we re-enable the AV bits and continue
- * on our merry way.
- */
- switch (hw->mac_type) {
- default:
- /* Indicate to hardware the Address is Valid. */
- rar_high |= E1000_RAH_AV;
- break;
- }
-
- E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
- E1000_WRITE_FLUSH();
-}
-
-/**
- * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
- * @hw: Struct containing variables accessed by shared code
- * @offset: Offset in VLAN filer table to write
- * @value: Value to write into VLAN filter table
- */
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
-{
- u32 temp;
-
- if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
- temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
- E1000_WRITE_FLUSH();
- } else {
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
- E1000_WRITE_FLUSH();
- }
-}
-
-/**
- * e1000_clear_vfta - Clears the VLAN filer table
- * @hw: Struct containing variables accessed by shared code
- */
-static void e1000_clear_vfta(struct e1000_hw *hw)
-{
- u32 offset;
- u32 vfta_value = 0;
- u32 vfta_offset = 0;
- u32 vfta_bit_in_reg = 0;
-
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- /* If the offset we want to clear is the same offset of the
- * manageability VLAN ID, then clear all bits except that of the
- * manageability unit */
- vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
- E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
- E1000_WRITE_FLUSH();
- }
-}
-
-static s32 e1000_id_led_init(struct e1000_hw *hw)
-{
- u32 ledctl;
- const u32 ledctl_mask = 0x000000FF;
- const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- u16 eeprom_data, i, temp;
- const u16 led_mask = 0x0F;
-
- e_dbg("e1000_id_led_init");
-
- if (hw->mac_type < e1000_82540) {
- /* Nothing to do */
- return E1000_SUCCESS;
- }
-
- ledctl = er32(LEDCTL);
- hw->ledctl_default = ledctl;
- hw->ledctl_mode1 = hw->ledctl_default;
- hw->ledctl_mode2 = hw->ledctl_default;
-
- if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
- e_dbg("EEPROM Read Error\n");
- return -E1000_ERR_EEPROM;
- }
-
- if ((eeprom_data == ID_LED_RESERVED_0000) ||
- (eeprom_data == ID_LED_RESERVED_FFFF)) {
- eeprom_data = ID_LED_DEFAULT;
- }
-
- for (i = 0; i < 4; i++) {
- temp = (eeprom_data >> (i << 2)) & led_mask;
- switch (temp) {
- case ID_LED_ON1_DEF2:
- case ID_LED_ON1_ON2:
- case ID_LED_ON1_OFF2:
- hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode1 |= ledctl_on << (i << 3);
- break;
- case ID_LED_OFF1_DEF2:
- case ID_LED_OFF1_ON2:
- case ID_LED_OFF1_OFF2:
- hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode1 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- switch (temp) {
- case ID_LED_DEF1_ON2:
- case ID_LED_ON1_ON2:
- case ID_LED_OFF1_ON2:
- hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode2 |= ledctl_on << (i << 3);
- break;
- case ID_LED_DEF1_OFF2:
- case ID_LED_ON1_OFF2:
- case ID_LED_OFF1_OFF2:
- hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- hw->ledctl_mode2 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_setup_led
- * @hw: Struct containing variables accessed by shared code
- *
- * Prepares SW controlable LED for use and saves the current state of the LED.
- */
-s32 e1000_setup_led(struct e1000_hw *hw)
-{
- u32 ledctl;
- s32 ret_val = E1000_SUCCESS;
-
- e_dbg("e1000_setup_led");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* No setup necessary */
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- /* Turn off PHY Smart Power Down (if enabled) */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
- &hw->phy_spd_default);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- (u16) (hw->phy_spd_default &
- ~IGP01E1000_GMII_SPD));
- if (ret_val)
- return ret_val;
- /* Fall Through */
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- ledctl = er32(LEDCTL);
- /* Save current LEDCTL settings */
- hw->ledctl_default = ledctl;
- /* Turn off LED0 */
- ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
- ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
- ew32(LEDCTL, ledctl);
- } else if (hw->media_type == e1000_media_type_copper)
- ew32(LEDCTL, hw->ledctl_mode1);
- break;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
- * @hw: Struct containing variables accessed by shared code
- */
-s32 e1000_cleanup_led(struct e1000_hw *hw)
-{
- s32 ret_val = E1000_SUCCESS;
-
- e_dbg("e1000_cleanup_led");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- /* No cleanup necessary */
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- /* Turn on PHY Smart Power Down (if previously enabled) */
- ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- hw->phy_spd_default);
- if (ret_val)
- return ret_val;
- /* Fall Through */
- default:
- /* Restore LEDCTL settings */
- ew32(LEDCTL, hw->ledctl_default);
- break;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_led_on - Turns on the software controllable LED
- * @hw: Struct containing variables accessed by shared code
- */
-s32 e1000_led_on(struct e1000_hw *hw)
-{
- u32 ctrl = er32(CTRL);
-
- e_dbg("e1000_led_on");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- /* Set SW Defineable Pin 0 to turn on the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- break;
- case e1000_82544:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Set SW Defineable Pin 0 to turn on the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else {
- /* Clear SW Defineable Pin 0 to turn on the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- }
- break;
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Clear SW Defineable Pin 0 to turn on the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else if (hw->media_type == e1000_media_type_copper) {
- ew32(LEDCTL, hw->ledctl_mode2);
- return E1000_SUCCESS;
- }
- break;
- }
-
- ew32(CTRL, ctrl);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_led_off - Turns off the software controllable LED
- * @hw: Struct containing variables accessed by shared code
- */
-s32 e1000_led_off(struct e1000_hw *hw)
-{
- u32 ctrl = er32(CTRL);
-
- e_dbg("e1000_led_off");
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- /* Clear SW Defineable Pin 0 to turn off the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- break;
- case e1000_82544:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Clear SW Defineable Pin 0 to turn off the LED */
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else {
- /* Set SW Defineable Pin 0 to turn off the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- }
- break;
- default:
- if (hw->media_type == e1000_media_type_fiber) {
- /* Set SW Defineable Pin 0 to turn off the LED */
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- } else if (hw->media_type == e1000_media_type_copper) {
- ew32(LEDCTL, hw->ledctl_mode1);
- return E1000_SUCCESS;
- }
- break;
- }
-
- ew32(CTRL, ctrl);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
- * @hw: Struct containing variables accessed by shared code
- */
-static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
-{
- volatile u32 temp;
-
- temp = er32(CRCERRS);
- temp = er32(SYMERRS);
- temp = er32(MPC);
- temp = er32(SCC);
- temp = er32(ECOL);
- temp = er32(MCC);
- temp = er32(LATECOL);
- temp = er32(COLC);
- temp = er32(DC);
- temp = er32(SEC);
- temp = er32(RLEC);
- temp = er32(XONRXC);
- temp = er32(XONTXC);
- temp = er32(XOFFRXC);
- temp = er32(XOFFTXC);
- temp = er32(FCRUC);
-
- temp = er32(PRC64);
- temp = er32(PRC127);
- temp = er32(PRC255);
- temp = er32(PRC511);
- temp = er32(PRC1023);
- temp = er32(PRC1522);
-
- temp = er32(GPRC);
- temp = er32(BPRC);
- temp = er32(MPRC);
- temp = er32(GPTC);
- temp = er32(GORCL);
- temp = er32(GORCH);
- temp = er32(GOTCL);
- temp = er32(GOTCH);
- temp = er32(RNBC);
- temp = er32(RUC);
- temp = er32(RFC);
- temp = er32(ROC);
- temp = er32(RJC);
- temp = er32(TORL);
- temp = er32(TORH);
- temp = er32(TOTL);
- temp = er32(TOTH);
- temp = er32(TPR);
- temp = er32(TPT);
-
- temp = er32(PTC64);
- temp = er32(PTC127);
- temp = er32(PTC255);
- temp = er32(PTC511);
- temp = er32(PTC1023);
- temp = er32(PTC1522);
-
- temp = er32(MPTC);
- temp = er32(BPTC);
-
- if (hw->mac_type < e1000_82543)
- return;
-
- temp = er32(ALGNERRC);
- temp = er32(RXERRC);
- temp = er32(TNCRS);
- temp = er32(CEXTERR);
- temp = er32(TSCTC);
- temp = er32(TSCTFC);
-
- if (hw->mac_type <= e1000_82544)
- return;
-
- temp = er32(MGTPRC);
- temp = er32(MGTPDC);
- temp = er32(MGTPTC);
-}
-
-/**
- * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
- * @hw: Struct containing variables accessed by shared code
- *
- * Call this after e1000_init_hw. You may override the IFS defaults by setting
- * hw->ifs_params_forced to true. However, you must initialize hw->
- * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
- * before calling this function.
- */
-void e1000_reset_adaptive(struct e1000_hw *hw)
-{
- e_dbg("e1000_reset_adaptive");
-
- if (hw->adaptive_ifs) {
- if (!hw->ifs_params_forced) {
- hw->current_ifs_val = 0;
- hw->ifs_min_val = IFS_MIN;
- hw->ifs_max_val = IFS_MAX;
- hw->ifs_step_size = IFS_STEP;
- hw->ifs_ratio = IFS_RATIO;
- }
- hw->in_ifs_mode = false;
- ew32(AIT, 0);
- } else {
- e_dbg("Not in Adaptive IFS mode!\n");
- }
-}
-
-/**
- * e1000_update_adaptive - update adaptive IFS
- * @hw: Struct containing variables accessed by shared code
- * @tx_packets: Number of transmits since last callback
- * @total_collisions: Number of collisions since last callback
- *
- * Called during the callback/watchdog routine to update IFS value based on
- * the ratio of transmits to collisions.
- */
-void e1000_update_adaptive(struct e1000_hw *hw)
-{
- e_dbg("e1000_update_adaptive");
-
- if (hw->adaptive_ifs) {
- if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
- if (hw->tx_packet_delta > MIN_NUM_XMITS) {
- hw->in_ifs_mode = true;
- if (hw->current_ifs_val < hw->ifs_max_val) {
- if (hw->current_ifs_val == 0)
- hw->current_ifs_val =
- hw->ifs_min_val;
- else
- hw->current_ifs_val +=
- hw->ifs_step_size;
- ew32(AIT, hw->current_ifs_val);
- }
- }
- } else {
- if (hw->in_ifs_mode
- && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
- hw->current_ifs_val = 0;
- hw->in_ifs_mode = false;
- ew32(AIT, 0);
- }
- }
- } else {
- e_dbg("Not in Adaptive IFS mode!\n");
- }
-}
-
-/**
- * e1000_tbi_adjust_stats
- * @hw: Struct containing variables accessed by shared code
- * @frame_len: The length of the frame in question
- * @mac_addr: The Ethernet destination address of the frame in question
- *
- * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
- */
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
- u32 frame_len, u8 *mac_addr)
-{
- u64 carry_bit;
-
- /* First adjust the frame length. */
- frame_len--;
- /* We need to adjust the statistics counters, since the hardware
- * counters overcount this packet as a CRC error and undercount
- * the packet as a good packet
- */
- /* This packet should not be counted as a CRC error. */
- stats->crcerrs--;
- /* This packet does count as a Good Packet Received. */
- stats->gprc++;
-
- /* Adjust the Good Octets received counters */
- carry_bit = 0x80000000 & stats->gorcl;
- stats->gorcl += frame_len;
- /* If the high bit of Gorcl (the low 32 bits of the Good Octets
- * Received Count) was one before the addition,
- * AND it is zero after, then we lost the carry out,
- * need to add one to Gorch (Good Octets Received Count High).
- * This could be simplified if all environments supported
- * 64-bit integers.
- */
- if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
- stats->gorch++;
- /* Is this a broadcast or multicast? Check broadcast first,
- * since the test for a multicast frame will test positive on
- * a broadcast frame.
- */
- if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
- /* Broadcast packet */
- stats->bprc++;
- else if (*mac_addr & 0x01)
- /* Multicast packet */
- stats->mprc++;
-
- if (frame_len == hw->max_frame_size) {
- /* In this case, the hardware has overcounted the number of
- * oversize frames.
- */
- if (stats->roc > 0)
- stats->roc--;
- }
-
- /* Adjust the bin counters when the extra byte put the frame in the
- * wrong bin. Remember that the frame_len was adjusted above.
- */
- if (frame_len == 64) {
- stats->prc64++;
- stats->prc127--;
- } else if (frame_len == 127) {
- stats->prc127++;
- stats->prc255--;
- } else if (frame_len == 255) {
- stats->prc255++;
- stats->prc511--;
- } else if (frame_len == 511) {
- stats->prc511++;
- stats->prc1023--;
- } else if (frame_len == 1023) {
- stats->prc1023++;
- stats->prc1522--;
- } else if (frame_len == 1522) {
- stats->prc1522++;
- }
-}
-
-/**
- * e1000_get_bus_info
- * @hw: Struct containing variables accessed by shared code
- *
- * Gets the current PCI bus type, speed, and width of the hardware
- */
-void e1000_get_bus_info(struct e1000_hw *hw)
-{
- u32 status;
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- hw->bus_type = e1000_bus_type_pci;
- hw->bus_speed = e1000_bus_speed_unknown;
- hw->bus_width = e1000_bus_width_unknown;
- break;
- default:
- status = er32(STATUS);
- hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
- e1000_bus_type_pcix : e1000_bus_type_pci;
-
- if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
- hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
- e1000_bus_speed_66 : e1000_bus_speed_120;
- } else if (hw->bus_type == e1000_bus_type_pci) {
- hw->bus_speed = (status & E1000_STATUS_PCI66) ?
- e1000_bus_speed_66 : e1000_bus_speed_33;
- } else {
- switch (status & E1000_STATUS_PCIX_SPEED) {
- case E1000_STATUS_PCIX_SPEED_66:
- hw->bus_speed = e1000_bus_speed_66;
- break;
- case E1000_STATUS_PCIX_SPEED_100:
- hw->bus_speed = e1000_bus_speed_100;
- break;
- case E1000_STATUS_PCIX_SPEED_133:
- hw->bus_speed = e1000_bus_speed_133;
- break;
- default:
- hw->bus_speed = e1000_bus_speed_reserved;
- break;
- }
- }
- hw->bus_width = (status & E1000_STATUS_BUS64) ?
- e1000_bus_width_64 : e1000_bus_width_32;
- break;
- }
-}
-
-/**
- * e1000_write_reg_io
- * @hw: Struct containing variables accessed by shared code
- * @offset: offset to write to
- * @value: value to write
- *
- * Writes a value to one of the devices registers using port I/O (as opposed to
- * memory mapped I/O). Only 82544 and newer devices support port I/O.
- */
-static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
-{
- unsigned long io_addr = hw->io_base;
- unsigned long io_data = hw->io_base + 4;
-
- e1000_io_write(hw, io_addr, offset);
- e1000_io_write(hw, io_data, value);
-}
-
-/**
- * e1000_get_cable_length - Estimates the cable length.
- * @hw: Struct containing variables accessed by shared code
- * @min_length: The estimated minimum length
- * @max_length: The estimated maximum length
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
- *
- * This function always returns a ranged length (minimum & maximum).
- * So for M88 phy's, this function interprets the one value returned from the
- * register to the minimum and maximum range.
- * For IGP phy's, the function calculates the range by the AGC registers.
- */
-static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
- u16 *max_length)
-{
- s32 ret_val;
- u16 agc_value = 0;
- u16 i, phy_data;
- u16 cable_length;
-
- e_dbg("e1000_get_cable_length");
-
- *min_length = *max_length = 0;
-
- /* Use old method for Phy older than IGP */
- if (hw->phy_type == e1000_phy_m88) {
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
- cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
-
- /* Convert the enum value to ranged values */
- switch (cable_length) {
- case e1000_cable_length_50:
- *min_length = 0;
- *max_length = e1000_igp_cable_length_50;
- break;
- case e1000_cable_length_50_80:
- *min_length = e1000_igp_cable_length_50;
- *max_length = e1000_igp_cable_length_80;
- break;
- case e1000_cable_length_80_110:
- *min_length = e1000_igp_cable_length_80;
- *max_length = e1000_igp_cable_length_110;
- break;
- case e1000_cable_length_110_140:
- *min_length = e1000_igp_cable_length_110;
- *max_length = e1000_igp_cable_length_140;
- break;
- case e1000_cable_length_140:
- *min_length = e1000_igp_cable_length_140;
- *max_length = e1000_igp_cable_length_170;
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
- } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
- u16 cur_agc_value;
- u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
- static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
- IGP01E1000_PHY_AGC_A,
- IGP01E1000_PHY_AGC_B,
- IGP01E1000_PHY_AGC_C,
- IGP01E1000_PHY_AGC_D
- };
- /* Read the AGC registers for all channels */
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
-
- ret_val =
- e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
- if (ret_val)
- return ret_val;
-
- cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
-
- /* Value bound check. */
- if ((cur_agc_value >=
- IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
- || (cur_agc_value == 0))
- return -E1000_ERR_PHY;
-
- agc_value += cur_agc_value;
-
- /* Update minimal AGC value. */
- if (min_agc_value > cur_agc_value)
- min_agc_value = cur_agc_value;
- }
-
- /* Remove the minimal AGC result for length < 50m */
- if (agc_value <
- IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
- agc_value -= min_agc_value;
-
- /* Get the average length of the remaining 3 channels */
- agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
- } else {
- /* Get the average length of all the 4 channels. */
- agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
- }
-
- /* Set the range of the calculated length. */
- *min_length = ((e1000_igp_cable_length_table[agc_value] -
- IGP01E1000_AGC_RANGE) > 0) ?
- (e1000_igp_cable_length_table[agc_value] -
- IGP01E1000_AGC_RANGE) : 0;
- *max_length = e1000_igp_cable_length_table[agc_value] +
- IGP01E1000_AGC_RANGE;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_check_polarity - Check the cable polarity
- * @hw: Struct containing variables accessed by shared code
- * @polarity: output parameter : 0 - Polarity is not reversed
- * 1 - Polarity is reversed.
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
- *
- * For phy's older than IGP, this function simply reads the polarity bit in the
- * Phy Status register. For IGP phy's, this bit is valid only if link speed is
- * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
- * return 0. If the link speed is 1000 Mbps the polarity status is in the
- * IGP01E1000_PHY_PCS_INIT_REG.
- */
-static s32 e1000_check_polarity(struct e1000_hw *hw,
- e1000_rev_polarity *polarity)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_check_polarity");
-
- if (hw->phy_type == e1000_phy_m88) {
- /* return the Polarity bit in the Status register. */
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
- *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
- M88E1000_PSSR_REV_POLARITY_SHIFT) ?
- e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
-
- } else if (hw->phy_type == e1000_phy_igp) {
- /* Read the Status register to check the speed */
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
- * find the polarity status */
- if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
-
- /* Read the GIG initialization PCS register (0x00B4) */
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- /* Check the polarity bits */
- *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
- e1000_rev_polarity_reversed :
- e1000_rev_polarity_normal;
- } else {
- /* For 10 Mbps, read the polarity bit in the status register. (for
- * 100 Mbps this bit is always 0) */
- *polarity =
- (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
- e1000_rev_polarity_reversed :
- e1000_rev_polarity_normal;
- }
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_check_downshift - Check if Downshift occurred
- * @hw: Struct containing variables accessed by shared code
- * @downshift: output parameter : 0 - No Downshift occurred.
- * 1 - Downshift occurred.
- *
- * returns: - E1000_ERR_XXX
- * E1000_SUCCESS
- *
- * For phy's older than IGP, this function reads the Downshift bit in the Phy
- * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
- * Link Health register. In IGP this bit is latched high, so the driver must
- * read it immediately after link is established.
- */
-static s32 e1000_check_downshift(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- e_dbg("e1000_check_downshift");
-
- if (hw->phy_type == e1000_phy_igp) {
- ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- hw->speed_downgraded =
- (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
- } else if (hw->phy_type == e1000_phy_m88) {
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
- M88E1000_PSSR_DOWNSHIFT_SHIFT;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_config_dsp_after_link_change
- * @hw: Struct containing variables accessed by shared code
- * @link_up: was link up at the time this was called
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- * E1000_SUCCESS at any other case.
- *
- * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
- * gigabit link is achieved to improve link quality.
- */
-
-static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
-{
- s32 ret_val;
- u16 phy_data, phy_saved_data, speed, duplex, i;
- static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
- IGP01E1000_PHY_AGC_PARAM_A,
- IGP01E1000_PHY_AGC_PARAM_B,
- IGP01E1000_PHY_AGC_PARAM_C,
- IGP01E1000_PHY_AGC_PARAM_D
- };
- u16 min_length, max_length;
-
- e_dbg("e1000_config_dsp_after_link_change");
-
- if (hw->phy_type != e1000_phy_igp)
- return E1000_SUCCESS;
-
- if (link_up) {
- ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- e_dbg("Error getting link speed and duplex\n");
- return ret_val;
- }
-
- if (speed == SPEED_1000) {
-
- ret_val =
- e1000_get_cable_length(hw, &min_length,
- &max_length);
- if (ret_val)
- return ret_val;
-
- if ((hw->dsp_config_state == e1000_dsp_config_enabled)
- && min_length >= e1000_igp_cable_length_50) {
-
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
- ret_val =
- e1000_read_phy_reg(hw,
- dsp_reg_array[i],
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &=
- ~IGP01E1000_PHY_EDAC_MU_INDEX;
-
- ret_val =
- e1000_write_phy_reg(hw,
- dsp_reg_array
- [i], phy_data);
- if (ret_val)
- return ret_val;
- }
- hw->dsp_config_state =
- e1000_dsp_config_activated;
- }
-
- if ((hw->ffe_config_state == e1000_ffe_config_enabled)
- && (min_length < e1000_igp_cable_length_50)) {
-
- u16 ffe_idle_err_timeout =
- FFE_IDLE_ERR_COUNT_TIMEOUT_20;
- u32 idle_errs = 0;
-
- /* clear previous idle error counts */
- ret_val =
- e1000_read_phy_reg(hw, PHY_1000T_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- for (i = 0; i < ffe_idle_err_timeout; i++) {
- udelay(1000);
- ret_val =
- e1000_read_phy_reg(hw,
- PHY_1000T_STATUS,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- idle_errs +=
- (phy_data &
- SR_1000T_IDLE_ERROR_CNT);
- if (idle_errs >
- SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
- {
- hw->ffe_config_state =
- e1000_ffe_config_active;
-
- ret_val =
- e1000_write_phy_reg(hw,
- IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_CM_CP);
- if (ret_val)
- return ret_val;
- break;
- }
-
- if (idle_errs)
- ffe_idle_err_timeout =
- FFE_IDLE_ERR_COUNT_TIMEOUT_100;
- }
- }
- }
- } else {
- if (hw->dsp_config_state == e1000_dsp_config_activated) {
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of the routines. */
- ret_val =
- e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- /* Disable the PHY transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
- if (ret_val)
- return ret_val;
- for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
- ret_val =
- e1000_read_phy_reg(hw, dsp_reg_array[i],
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
- phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
-
- ret_val =
- e1000_write_phy_reg(hw, dsp_reg_array[i],
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- /* Now enable the transmitter */
- ret_val =
- e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- hw->dsp_config_state = e1000_dsp_config_enabled;
- }
-
- if (hw->ffe_config_state == e1000_ffe_config_active) {
- /* Save off the current value of register 0x2F5B to be restored at
- * the end of the routines. */
- ret_val =
- e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- /* Disable the PHY transmitter */
- ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
-
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_FORCE_GIGA);
- if (ret_val)
- return ret_val;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
- IGP01E1000_PHY_DSP_FFE_DEFAULT);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, 0x0000,
- IGP01E1000_IEEE_RESTART_AUTONEG);
- if (ret_val)
- return ret_val;
-
- mdelay(20);
-
- /* Now enable the transmitter */
- ret_val =
- e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
-
- if (ret_val)
- return ret_val;
-
- hw->ffe_config_state = e1000_ffe_config_enabled;
- }
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_set_phy_mode - Set PHY to class A mode
- * @hw: Struct containing variables accessed by shared code
- *
- * Assumes the following operations will follow to enable the new class mode.
- * 1. Do a PHY soft reset
- * 2. Restart auto-negotiation or force link.
- */
-static s32 e1000_set_phy_mode(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 eeprom_data;
-
- e_dbg("e1000_set_phy_mode");
-
- if ((hw->mac_type == e1000_82545_rev_3) &&
- (hw->media_type == e1000_media_type_copper)) {
- ret_val =
- e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
- &eeprom_data);
- if (ret_val) {
- return ret_val;
- }
-
- if ((eeprom_data != EEPROM_RESERVED_WORD) &&
- (eeprom_data & EEPROM_PHY_CLASS_A)) {
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
- 0x000B);
- if (ret_val)
- return ret_val;
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
- 0x8104);
- if (ret_val)
- return ret_val;
-
- hw->phy_reset_disable = false;
- }
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_set_d3_lplu_state - set d3 link power state
- * @hw: Struct containing variables accessed by shared code
- * @active: true to enable lplu false to disable lplu.
- *
- * This function sets the lplu state according to the active flag. When
- * activating lplu this function also disables smart speed and vise versa.
- * lplu will not be activated unless the device autonegotiation advertisement
- * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
- *
- * returns: - E1000_ERR_PHY if fail to read/write the PHY
- * E1000_SUCCESS at any other case.
- */
-static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
-{
- s32 ret_val;
- u16 phy_data;
- e_dbg("e1000_set_d3_lplu_state");
-
- if (hw->phy_type != e1000_phy_igp)
- return E1000_SUCCESS;
-
- /* During driver activity LPLU should not be used or it will attain link
- * from the lowest speeds starting from 10Mbps. The capability is used for
- * Dx transitions and states */
- if (hw->mac_type == e1000_82541_rev_2
- || hw->mac_type == e1000_82547_rev_2) {
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
- if (ret_val)
- return ret_val;
- }
-
- if (!active) {
- if (hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547_rev_2) {
- phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
- * Dx states where the power conservation is most important. During
- * driver activity we should enable SmartSpeed, so performance is
- * maintained. */
- if (hw->smart_speed == e1000_smart_speed_on) {
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- } else if (hw->smart_speed == e1000_smart_speed_off) {
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
- }
- } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
- || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
- || (hw->autoneg_advertised ==
- AUTONEG_ADVERTISE_10_100_ALL)) {
-
- if (hw->mac_type == e1000_82541_rev_2 ||
- hw->mac_type == e1000_82547_rev_2) {
- phy_data |= IGP01E1000_GMII_FLEX_SPD;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
- phy_data);
- if (ret_val)
- return ret_val;
- }
-
- /* When LPLU is enabled we should disable SmartSpeed */
- ret_val =
- e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val =
- e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- phy_data);
- if (ret_val)
- return ret_val;
-
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_set_vco_speed
- * @hw: Struct containing variables accessed by shared code
- *
- * Change VCO speed register to improve Bit Error Rate performance of SERDES.
- */
-static s32 e1000_set_vco_speed(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 default_page = 0;
- u16 phy_data;
-
- e_dbg("e1000_set_vco_speed");
-
- switch (hw->mac_type) {
- case e1000_82545_rev_3:
- case e1000_82546_rev_3:
- break;
- default:
- return E1000_SUCCESS;
- }
-
- /* Set PHY register 30, page 5, bit 8 to 0 */
-
- ret_val =
- e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* Set PHY register 30, page 4, bit 11 to 1 */
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PHY_VCO_REG_BIT11;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- ret_val =
- e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
- if (ret_val)
- return ret_val;
-
- return E1000_SUCCESS;
-}
-
-
-/**
- * e1000_enable_mng_pass_thru - check for bmc pass through
- * @hw: Struct containing variables accessed by shared code
- *
- * Verifies the hardware needs to allow ARPs to be processed by the host
- * returns: - true/false
- */
-u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
-{
- u32 manc;
-
- if (hw->asf_firmware_present) {
- manc = er32(MANC);
-
- if (!(manc & E1000_MANC_RCV_TCO_EN) ||
- !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
- return false;
- if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
- return true;
- }
- return false;
-}
-
-static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 mii_status_reg;
- u16 i;
-
- /* Polarity reversal workaround for forced 10F/10H links. */
-
- /* Disable the transmitter on the PHY */
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
- if (ret_val)
- return ret_val;
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
- if (ret_val)
- return ret_val;
-
- /* This loop will early-out if the NO link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Link Status bit
- * to be clear.
- */
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
- break;
- mdelay(100);
- }
-
- /* Recommended delay time after link has been lost */
- mdelay(1000);
-
- /* Now we will re-enable th transmitter on the PHY */
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
- if (ret_val)
- return ret_val;
- mdelay(50);
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
- if (ret_val)
- return ret_val;
-
- /* This loop will early-out if the link condition has been met. */
- for (i = PHY_FORCE_TIME; i > 0; i--) {
- /* Read the MII Status Register and wait for Link Status bit
- * to be set.
- */
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (mii_status_reg & MII_SR_LINK_STATUS)
- break;
- mdelay(100);
- }
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_get_auto_rd_done
- * @hw: Struct containing variables accessed by shared code
- *
- * Check for EEPROM Auto Read bit done.
- * returns: - E1000_ERR_RESET if fail to reset MAC
- * E1000_SUCCESS at any other case.
- */
-static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
-{
- e_dbg("e1000_get_auto_rd_done");
- msleep(5);
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_get_phy_cfg_done
- * @hw: Struct containing variables accessed by shared code
- *
- * Checks if the PHY configuration is done
- * returns: - E1000_ERR_RESET if fail to reset MAC
- * E1000_SUCCESS at any other case.
- */
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
-{
- e_dbg("e1000_get_phy_cfg_done");
- mdelay(10);
- return E1000_SUCCESS;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* e1000_hw.h
- * Structures, enums, and macros for the MAC
- */
-
-#ifndef _E1000_HW_H_
-#define _E1000_HW_H_
-
-#include "e1000_osdep.h"
-
-
-/* Forward declarations of structures used by the shared code */
-struct e1000_hw;
-struct e1000_hw_stats;
-
-/* Enumerated types specific to the e1000 hardware */
-/* Media Access Controllers */
-typedef enum {
- e1000_undefined = 0,
- e1000_82542_rev2_0,
- e1000_82542_rev2_1,
- e1000_82543,
- e1000_82544,
- e1000_82540,
- e1000_82545,
- e1000_82545_rev_3,
- e1000_82546,
- e1000_ce4100,
- e1000_82546_rev_3,
- e1000_82541,
- e1000_82541_rev_2,
- e1000_82547,
- e1000_82547_rev_2,
- e1000_num_macs
-} e1000_mac_type;
-
-typedef enum {
- e1000_eeprom_uninitialized = 0,
- e1000_eeprom_spi,
- e1000_eeprom_microwire,
- e1000_eeprom_flash,
- e1000_eeprom_none, /* No NVM support */
- e1000_num_eeprom_types
-} e1000_eeprom_type;
-
-/* Media Types */
-typedef enum {
- e1000_media_type_copper = 0,
- e1000_media_type_fiber = 1,
- e1000_media_type_internal_serdes = 2,
- e1000_num_media_types
-} e1000_media_type;
-
-typedef enum {
- e1000_10_half = 0,
- e1000_10_full = 1,
- e1000_100_half = 2,
- e1000_100_full = 3
-} e1000_speed_duplex_type;
-
-/* Flow Control Settings */
-typedef enum {
- E1000_FC_NONE = 0,
- E1000_FC_RX_PAUSE = 1,
- E1000_FC_TX_PAUSE = 2,
- E1000_FC_FULL = 3,
- E1000_FC_DEFAULT = 0xFF
-} e1000_fc_type;
-
-struct e1000_shadow_ram {
- u16 eeprom_word;
- bool modified;
-};
-
-/* PCI bus types */
-typedef enum {
- e1000_bus_type_unknown = 0,
- e1000_bus_type_pci,
- e1000_bus_type_pcix,
- e1000_bus_type_reserved
-} e1000_bus_type;
-
-/* PCI bus speeds */
-typedef enum {
- e1000_bus_speed_unknown = 0,
- e1000_bus_speed_33,
- e1000_bus_speed_66,
- e1000_bus_speed_100,
- e1000_bus_speed_120,
- e1000_bus_speed_133,
- e1000_bus_speed_reserved
-} e1000_bus_speed;
-
-/* PCI bus widths */
-typedef enum {
- e1000_bus_width_unknown = 0,
- e1000_bus_width_32,
- e1000_bus_width_64,
- e1000_bus_width_reserved
-} e1000_bus_width;
-
-/* PHY status info structure and supporting enums */
-typedef enum {
- e1000_cable_length_50 = 0,
- e1000_cable_length_50_80,
- e1000_cable_length_80_110,
- e1000_cable_length_110_140,
- e1000_cable_length_140,
- e1000_cable_length_undefined = 0xFF
-} e1000_cable_length;
-
-typedef enum {
- e1000_gg_cable_length_60 = 0,
- e1000_gg_cable_length_60_115 = 1,
- e1000_gg_cable_length_115_150 = 2,
- e1000_gg_cable_length_150 = 4
-} e1000_gg_cable_length;
-
-typedef enum {
- e1000_igp_cable_length_10 = 10,
- e1000_igp_cable_length_20 = 20,
- e1000_igp_cable_length_30 = 30,
- e1000_igp_cable_length_40 = 40,
- e1000_igp_cable_length_50 = 50,
- e1000_igp_cable_length_60 = 60,
- e1000_igp_cable_length_70 = 70,
- e1000_igp_cable_length_80 = 80,
- e1000_igp_cable_length_90 = 90,
- e1000_igp_cable_length_100 = 100,
- e1000_igp_cable_length_110 = 110,
- e1000_igp_cable_length_115 = 115,
- e1000_igp_cable_length_120 = 120,
- e1000_igp_cable_length_130 = 130,
- e1000_igp_cable_length_140 = 140,
- e1000_igp_cable_length_150 = 150,
- e1000_igp_cable_length_160 = 160,
- e1000_igp_cable_length_170 = 170,
- e1000_igp_cable_length_180 = 180
-} e1000_igp_cable_length;
-
-typedef enum {
- e1000_10bt_ext_dist_enable_normal = 0,
- e1000_10bt_ext_dist_enable_lower,
- e1000_10bt_ext_dist_enable_undefined = 0xFF
-} e1000_10bt_ext_dist_enable;
-
-typedef enum {
- e1000_rev_polarity_normal = 0,
- e1000_rev_polarity_reversed,
- e1000_rev_polarity_undefined = 0xFF
-} e1000_rev_polarity;
-
-typedef enum {
- e1000_downshift_normal = 0,
- e1000_downshift_activated,
- e1000_downshift_undefined = 0xFF
-} e1000_downshift;
-
-typedef enum {
- e1000_smart_speed_default = 0,
- e1000_smart_speed_on,
- e1000_smart_speed_off
-} e1000_smart_speed;
-
-typedef enum {
- e1000_polarity_reversal_enabled = 0,
- e1000_polarity_reversal_disabled,
- e1000_polarity_reversal_undefined = 0xFF
-} e1000_polarity_reversal;
-
-typedef enum {
- e1000_auto_x_mode_manual_mdi = 0,
- e1000_auto_x_mode_manual_mdix,
- e1000_auto_x_mode_auto1,
- e1000_auto_x_mode_auto2,
- e1000_auto_x_mode_undefined = 0xFF
-} e1000_auto_x_mode;
-
-typedef enum {
- e1000_1000t_rx_status_not_ok = 0,
- e1000_1000t_rx_status_ok,
- e1000_1000t_rx_status_undefined = 0xFF
-} e1000_1000t_rx_status;
-
-typedef enum {
- e1000_phy_m88 = 0,
- e1000_phy_igp,
- e1000_phy_8211,
- e1000_phy_8201,
- e1000_phy_undefined = 0xFF
-} e1000_phy_type;
-
-typedef enum {
- e1000_ms_hw_default = 0,
- e1000_ms_force_master,
- e1000_ms_force_slave,
- e1000_ms_auto
-} e1000_ms_type;
-
-typedef enum {
- e1000_ffe_config_enabled = 0,
- e1000_ffe_config_active,
- e1000_ffe_config_blocked
-} e1000_ffe_config;
-
-typedef enum {
- e1000_dsp_config_disabled = 0,
- e1000_dsp_config_enabled,
- e1000_dsp_config_activated,
- e1000_dsp_config_undefined = 0xFF
-} e1000_dsp_config;
-
-struct e1000_phy_info {
- e1000_cable_length cable_length;
- e1000_10bt_ext_dist_enable extended_10bt_distance;
- e1000_rev_polarity cable_polarity;
- e1000_downshift downshift;
- e1000_polarity_reversal polarity_correction;
- e1000_auto_x_mode mdix_mode;
- e1000_1000t_rx_status local_rx;
- e1000_1000t_rx_status remote_rx;
-};
-
-struct e1000_phy_stats {
- u32 idle_errors;
- u32 receive_errors;
-};
-
-struct e1000_eeprom_info {
- e1000_eeprom_type type;
- u16 word_size;
- u16 opcode_bits;
- u16 address_bits;
- u16 delay_usec;
- u16 page_size;
-};
-
-/* Flex ASF Information */
-#define E1000_HOST_IF_MAX_SIZE 2048
-
-typedef enum {
- e1000_byte_align = 0,
- e1000_word_align = 1,
- e1000_dword_align = 2
-} e1000_align_type;
-
-/* Error Codes */
-#define E1000_SUCCESS 0
-#define E1000_ERR_EEPROM 1
-#define E1000_ERR_PHY 2
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_PARAM 4
-#define E1000_ERR_MAC_TYPE 5
-#define E1000_ERR_PHY_TYPE 6
-#define E1000_ERR_RESET 9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_ERR_HOST_INTERFACE_COMMAND 11
-#define E1000_BLK_PHY_RESET 12
-
-#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
- (((_value) & 0xff00) >> 8))
-
-/* Function prototypes */
-/* Initialization */
-s32 e1000_reset_hw(struct e1000_hw *hw);
-s32 e1000_init_hw(struct e1000_hw *hw);
-s32 e1000_set_mac_type(struct e1000_hw *hw);
-void e1000_set_media_type(struct e1000_hw *hw);
-
-/* Link Configuration */
-s32 e1000_setup_link(struct e1000_hw *hw);
-s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
-void e1000_config_collision_dist(struct e1000_hw *hw);
-s32 e1000_check_for_link(struct e1000_hw *hw);
-s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
-s32 e1000_force_mac_fc(struct e1000_hw *hw);
-
-/* PHY */
-s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
-s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
-s32 e1000_phy_hw_reset(struct e1000_hw *hw);
-s32 e1000_phy_reset(struct e1000_hw *hw);
-s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
-s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
-
-/* EEPROM Functions */
-s32 e1000_init_eeprom_params(struct e1000_hw *hw);
-
-/* MNG HOST IF functions */
-u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
-
-#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
-#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
-
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
-#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
-#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
-#define E1000_MNG_IAMT_MODE 0x3
-#define E1000_MNG_ICH_IAMT_MODE 0x2
-#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
-
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
-#define E1000_VFTA_ENTRY_SHIFT 0x5
-#define E1000_VFTA_ENTRY_MASK 0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
-
-struct e1000_host_mng_command_header {
- u8 command_id;
- u8 checksum;
- u16 reserved1;
- u16 reserved2;
- u16 command_length;
-};
-
-struct e1000_host_mng_command_info {
- struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
-};
-#ifdef __BIG_ENDIAN
-struct e1000_host_mng_dhcp_cookie {
- u32 signature;
- u16 vlan_id;
- u8 reserved0;
- u8 status;
- u32 reserved1;
- u8 checksum;
- u8 reserved3;
- u16 reserved2;
-};
-#else
-struct e1000_host_mng_dhcp_cookie {
- u32 signature;
- u8 status;
- u8 reserved0;
- u16 vlan_id;
- u32 reserved1;
- u16 reserved2;
- u8 reserved3;
- u8 checksum;
-};
-#endif
-
-bool e1000_check_mng_mode(struct e1000_hw *hw);
-s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
-s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
-s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
-s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
-s32 e1000_read_mac_addr(struct e1000_hw *hw);
-
-/* Filters (multicast, vlan, receive) */
-u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
-void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
-void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
-void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
-
-/* LED functions */
-s32 e1000_setup_led(struct e1000_hw *hw);
-s32 e1000_cleanup_led(struct e1000_hw *hw);
-s32 e1000_led_on(struct e1000_hw *hw);
-s32 e1000_led_off(struct e1000_hw *hw);
-s32 e1000_blink_led_start(struct e1000_hw *hw);
-
-/* Adaptive IFS Functions */
-
-/* Everything else */
-void e1000_reset_adaptive(struct e1000_hw *hw);
-void e1000_update_adaptive(struct e1000_hw *hw);
-void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
- u32 frame_len, u8 * mac_addr);
-void e1000_get_bus_info(struct e1000_hw *hw);
-void e1000_pci_set_mwi(struct e1000_hw *hw);
-void e1000_pci_clear_mwi(struct e1000_hw *hw);
-void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
-int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
-/* Port I/O is only supported on 82544 and newer */
-void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
-
-#define E1000_READ_REG_IO(a, reg) \
- e1000_read_reg_io((a), E1000_##reg)
-#define E1000_WRITE_REG_IO(a, reg, val) \
- e1000_write_reg_io((a), E1000_##reg, val)
-
-/* PCI Device IDs */
-#define E1000_DEV_ID_82542 0x1000
-#define E1000_DEV_ID_82543GC_FIBER 0x1001
-#define E1000_DEV_ID_82543GC_COPPER 0x1004
-#define E1000_DEV_ID_82544EI_COPPER 0x1008
-#define E1000_DEV_ID_82544EI_FIBER 0x1009
-#define E1000_DEV_ID_82544GC_COPPER 0x100C
-#define E1000_DEV_ID_82544GC_LOM 0x100D
-#define E1000_DEV_ID_82540EM 0x100E
-#define E1000_DEV_ID_82540EM_LOM 0x1015
-#define E1000_DEV_ID_82540EP_LOM 0x1016
-#define E1000_DEV_ID_82540EP 0x1017
-#define E1000_DEV_ID_82540EP_LP 0x101E
-#define E1000_DEV_ID_82545EM_COPPER 0x100F
-#define E1000_DEV_ID_82545EM_FIBER 0x1011
-#define E1000_DEV_ID_82545GM_COPPER 0x1026
-#define E1000_DEV_ID_82545GM_FIBER 0x1027
-#define E1000_DEV_ID_82545GM_SERDES 0x1028
-#define E1000_DEV_ID_82546EB_COPPER 0x1010
-#define E1000_DEV_ID_82546EB_FIBER 0x1012
-#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
-#define E1000_DEV_ID_82541EI 0x1013
-#define E1000_DEV_ID_82541EI_MOBILE 0x1018
-#define E1000_DEV_ID_82541ER_LOM 0x1014
-#define E1000_DEV_ID_82541ER 0x1078
-#define E1000_DEV_ID_82547GI 0x1075
-#define E1000_DEV_ID_82541GI 0x1076
-#define E1000_DEV_ID_82541GI_MOBILE 0x1077
-#define E1000_DEV_ID_82541GI_LF 0x107C
-#define E1000_DEV_ID_82546GB_COPPER 0x1079
-#define E1000_DEV_ID_82546GB_FIBER 0x107A
-#define E1000_DEV_ID_82546GB_SERDES 0x107B
-#define E1000_DEV_ID_82546GB_PCIE 0x108A
-#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
-#define E1000_DEV_ID_82547EI 0x1019
-#define E1000_DEV_ID_82547EI_MOBILE 0x101A
-#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
-#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E
-
-#define NODE_ADDRESS_SIZE 6
-#define ETH_LENGTH_OF_ADDRESS 6
-
-/* MAC decode size is 128K - This is the size of BAR0 */
-#define MAC_DECODE_SIZE (128 * 1024)
-
-#define E1000_82542_2_0_REV_ID 2
-#define E1000_82542_2_1_REV_ID 3
-#define E1000_REVISION_0 0
-#define E1000_REVISION_1 1
-#define E1000_REVISION_2 2
-#define E1000_REVISION_3 3
-
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-/* The sizes (in bytes) of a ethernet packet */
-#define ENET_HEADER_SIZE 14
-#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
-#define ETHERNET_FCS_SIZE 4
-#define MINIMUM_ETHERNET_PACKET_SIZE \
- (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
-#define CRC_LENGTH ETHERNET_FCS_SIZE
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* 802.1q VLAN Packet Sizes */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
-
-/* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
-#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
-#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
-
-/* Packet Header defines */
-#define IP_PROTOCOL_TCP 6
-#define IP_PROTOCOL_UDP 0x11
-
-/* This defines the bits that are set in the Interrupt Mask
- * Set/Read Register. Each bit is documented below:
- * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- * o RXSEQ = Receive Sequence Error
- */
-#define POLL_IMS_ENABLE_MASK ( \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ)
-
-/* This defines the bits that are set in the Interrupt Mask
- * Set/Read Register. Each bit is documented below:
- * o RXT0 = Receiver Timer Interrupt (ring 0)
- * o TXDW = Transmit Descriptor Written Back
- * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- * o RXSEQ = Receive Sequence Error
- * o LSC = Link Status Change
- */
-#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
-
-/* Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor. We
- * reserve one of these spots for our directed address, allowing us room for
- * E1000_RAR_ENTRIES - 1 multicast addresses.
- */
-#define E1000_RAR_ENTRIES 15
-
-#define MIN_NUMBER_OF_DESCRIPTORS 8
-#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
-
-/* Receive Descriptor */
-struct e1000_rx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 length; /* Length of data DMAed into data buffer */
- __le16 csum; /* Packet checksum */
- u8 status; /* Descriptor status */
- u8 errors; /* Descriptor Errors */
- __le16 special;
-};
-
-/* Receive Descriptor - Extended */
-union e1000_rx_desc_extended {
- struct {
- __le64 buffer_addr;
- __le64 reserved;
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length;
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-#define MAX_PS_BUFFERS 4
-/* Receive Descriptor - Packet Split */
-union e1000_rx_desc_packet_split {
- struct {
- /* one buffer for protocol header(s), three data buffers */
- __le64 buffer_addr[MAX_PS_BUFFERS];
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length0; /* length of buffer 0 */
- __le16 vlan; /* VLAN tag */
- } middle;
- struct {
- __le16 header_status;
- __le16 length[3]; /* length of buffers 1-3 */
- } upper;
- __le64 reserved;
- } wb; /* writeback */
-};
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
-#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
-#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
-#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
-#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
-#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
-#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define E1000_RXD_SPC_PRI_SHIFT 13
-#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
-#define E1000_RXD_SPC_CFI_SHIFT 12
-
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_TCPE 0x20000000
-#define E1000_RXDEXT_STATERR_IPE 0x40000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
-
-#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
-#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
-
-/* mask to determine if packets should be dropped due to frame errors */
-#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
-
-/* Transmit Descriptor */
-struct e1000_tx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 cso; /* Checksum offset */
- u8 cmd; /* Descriptor control */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 css; /* Checksum start */
- __le16 special;
- } fields;
- } upper;
-};
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
-#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
-
-/* Offload Context Descriptor */
-struct e1000_context_desc {
- union {
- __le32 ip_config;
- struct {
- u8 ipcss; /* IP checksum start */
- u8 ipcso; /* IP checksum offset */
- __le16 ipcse; /* IP checksum end */
- } ip_fields;
- } lower_setup;
- union {
- __le32 tcp_config;
- struct {
- u8 tucss; /* TCP checksum start */
- u8 tucso; /* TCP checksum offset */
- __le16 tucse; /* TCP checksum end */
- } tcp_fields;
- } upper_setup;
- __le32 cmd_and_length; /* */
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 hdr_len; /* Header length */
- __le16 mss; /* Maximum segment size */
- } fields;
- } tcp_seg_setup;
-};
-
-/* Offload data descriptor */
-struct e1000_data_desc {
- __le64 buffer_addr; /* Address of the descriptor's buffer address */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 typ_len_ext; /* */
- u8 cmd; /* */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 popts; /* Packet Options */
- __le16 special; /* */
- } fields;
- } upper;
-};
-
-/* Filters */
-#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
-#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
-#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-
-/* Receive Address Register */
-struct e1000_rar {
- volatile __le32 low; /* receive address low */
- volatile __le32 high; /* receive address high */
-};
-
-/* Number of entries in the Multicast Table Array (MTA). */
-#define E1000_NUM_MTA_REGISTERS 128
-
-/* IPv4 Address Table Entry */
-struct e1000_ipv4_at_entry {
- volatile u32 ipv4_addr; /* IP Address (RW) */
- volatile u32 reserved;
-};
-
-/* Four wakeup IP addresses are supported */
-#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
-#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
-#define E1000_IP6AT_SIZE 1
-
-/* IPv6 Address Table Entry */
-struct e1000_ipv6_at_entry {
- volatile u8 ipv6_addr[16];
-};
-
-/* Flexible Filter Length Table Entry */
-struct e1000_fflt_entry {
- volatile u32 length; /* Flexible Filter Length (RW) */
- volatile u32 reserved;
-};
-
-/* Flexible Filter Mask Table Entry */
-struct e1000_ffmt_entry {
- volatile u32 mask; /* Flexible Filter Mask (RW) */
- volatile u32 reserved;
-};
-
-/* Flexible Filter Value Table Entry */
-struct e1000_ffvt_entry {
- volatile u32 value; /* Flexible Filter Value (RW) */
- volatile u32 reserved;
-};
-
-/* Four Flexible Filters are supported */
-#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
-
-/* Each Flexible Filter is at most 128 (0x80) bytes in length */
-#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
-
-#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
-#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
-#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
-
-#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
-
-/* Register Set. (82543, 82544)
- *
- * Registers are defined to be 32 bits and should be accessed as 32 bit values.
- * These registers are physically located on the NIC, but are mapped into the
- * host memory address space.
- *
- * RW - register is both readable and writable
- * RO - register is read only
- * WO - register is write only
- * R/clr - register is read only and is cleared when read
- * A - register array
- */
-#define E1000_CTRL 0x00000 /* Device Control - RW */
-#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
-#define E1000_STATUS 0x00008 /* Device Status - RO */
-#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
-#define E1000_EERD 0x00014 /* EEPROM Read - RW */
-#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
-#define E1000_FLA 0x0001C /* Flash Access - RW */
-#define E1000_MDIC 0x00020 /* MDI Control - RW */
-
-extern void __iomem *ce4100_gbe_mdio_base_virt;
-#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt)
-#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
-#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
-#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
-#define E1000_MDC_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC)
-#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20)
-#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24)
-
-#define E1000_SCTL 0x00024 /* SerDes Control - RW */
-#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
-#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
-#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
-#define E1000_FCT 0x00030 /* Flow Control Type - RW */
-#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
-#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
-#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
-#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
-#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
-#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
-
-/* Auxiliary Control Register. This register is CE4100 specific,
- * RMII/RGMII function is switched by this register - RW
- * Following are bits definitions of the Auxiliary Control Register
- */
-#define E1000_CTL_AUX 0x000E0
-#define E1000_CTL_AUX_END_SEL_SHIFT 10
-#define E1000_CTL_AUX_ENDIANESS_SHIFT 8
-#define E1000_CTL_AUX_RGMII_RMII_SHIFT 0
-
-/* descriptor and packet transfer use CTL_AUX.ENDIANESS */
-#define E1000_CTL_AUX_DES_PKT (0x0 << E1000_CTL_AUX_END_SEL_SHIFT)
-/* descriptor use CTL_AUX.ENDIANESS, packet use default */
-#define E1000_CTL_AUX_DES (0x1 << E1000_CTL_AUX_END_SEL_SHIFT)
-/* descriptor use default, packet use CTL_AUX.ENDIANESS */
-#define E1000_CTL_AUX_PKT (0x2 << E1000_CTL_AUX_END_SEL_SHIFT)
-/* all use CTL_AUX.ENDIANESS */
-#define E1000_CTL_AUX_ALL (0x3 << E1000_CTL_AUX_END_SEL_SHIFT)
-
-#define E1000_CTL_AUX_RGMII (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
-#define E1000_CTL_AUX_RMII (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
-
-/* LW little endian, Byte big endian */
-#define E1000_CTL_AUX_LWLE_BBE (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT)
-#define E1000_CTL_AUX_LWLE_BLE (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT)
-#define E1000_CTL_AUX_LWBE_BBE (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT)
-#define E1000_CTL_AUX_LWBE_BLE (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT)
-
-#define E1000_RCTL 0x00100 /* RX Control - RW */
-#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
-#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
-#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
-#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
-#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
-#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
-#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
-#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
-#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
-#define E1000_TCTL 0x00400 /* TX Control - RW */
-#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
-#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
-#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
-#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
-#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
-#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
-#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
-#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
-#define FEXTNVM_SW_CONFIG 0x0001
-#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
-#define E1000_PBS 0x01008 /* Packet Buffer Size */
-#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
-#define E1000_FLASH_UPDATES 1000
-#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
-#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
-#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
-#define E1000_FLSWCTL 0x01030 /* FLASH control register */
-#define E1000_FLSWDATA 0x01034 /* FLASH data register */
-#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
-#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
-#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
-#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
-#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
-#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
-#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
-#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
-#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
-#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
-#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
-#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
-#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
-#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
-#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
-#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
-#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
-#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
-#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
-#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
-#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
-#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
-#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
-#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
-#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
-#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
-#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
-#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
-#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
-#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
-#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
-#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
-#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
-#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
-#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
-#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
-#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
-#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
-#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
-#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
-#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
-#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
-#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
-#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
-#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
-#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
-#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
-#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
-#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
-#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
-#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
-#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
-#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
-#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
-#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
-#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
-#define E1000_COLC 0x04028 /* Collision Count - R/clr */
-#define E1000_DC 0x04030 /* Defer Count - R/clr */
-#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
-#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
-#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
-#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
-#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
-#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
-#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
-#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
-#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
-#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
-#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
-#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
-#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
-#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
-#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
-#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
-#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
-#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
-#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
-#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
-#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
-#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
-#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
-#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
-#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
-#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
-#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
-#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
-#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
-#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
-#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
-#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
-#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
-#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
-#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
-#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
-#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
-#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
-#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
-#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
-#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
-#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
-#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
-#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
-#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
-#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
-#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
-#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
-#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
-#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
-#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
-#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
-#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
-#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
-#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
-#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
-#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
-#define E1000_RFCTL 0x05008 /* Receive Filter Control */
-#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
-#define E1000_RA 0x05400 /* Receive Address - RW Array */
-#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
-#define E1000_WUC 0x05800 /* Wakeup Control - RW */
-#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
-#define E1000_WUS 0x05810 /* Wakeup Status - RO */
-#define E1000_MANC 0x05820 /* Management Control - RW */
-#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
-#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
-#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
-#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
-#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
-#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
-#define E1000_HOST_IF 0x08800 /* Host Interface */
-#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
-#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
-
-#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
-#define E1000_MDPHYA 0x0003C /* PHY address - RW */
-#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
-#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
-
-#define E1000_GCR 0x05B00 /* PCI-Ex Control */
-#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
-#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
-#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
-#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
-#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
-#define E1000_SWSM 0x05B50 /* SW Semaphore */
-#define E1000_FWSM 0x05B54 /* FW Semaphore */
-#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
-#define E1000_HICR 0x08F00 /* Host Interface Control */
-
-/* RSS registers */
-#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
-#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
-#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
-#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
-#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
-#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
-/* Register Set (82542)
- *
- * Some of the 82542 registers are located at different offsets than they are
- * in more current versions of the 8254x. Despite the difference in location,
- * the registers function in the same manner.
- */
-#define E1000_82542_CTL_AUX E1000_CTL_AUX
-#define E1000_82542_CTRL E1000_CTRL
-#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
-#define E1000_82542_STATUS E1000_STATUS
-#define E1000_82542_EECD E1000_EECD
-#define E1000_82542_EERD E1000_EERD
-#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
-#define E1000_82542_FLA E1000_FLA
-#define E1000_82542_MDIC E1000_MDIC
-#define E1000_82542_SCTL E1000_SCTL
-#define E1000_82542_FEXTNVM E1000_FEXTNVM
-#define E1000_82542_FCAL E1000_FCAL
-#define E1000_82542_FCAH E1000_FCAH
-#define E1000_82542_FCT E1000_FCT
-#define E1000_82542_VET E1000_VET
-#define E1000_82542_RA 0x00040
-#define E1000_82542_ICR E1000_ICR
-#define E1000_82542_ITR E1000_ITR
-#define E1000_82542_ICS E1000_ICS
-#define E1000_82542_IMS E1000_IMS
-#define E1000_82542_IMC E1000_IMC
-#define E1000_82542_RCTL E1000_RCTL
-#define E1000_82542_RDTR 0x00108
-#define E1000_82542_RDBAL 0x00110
-#define E1000_82542_RDBAH 0x00114
-#define E1000_82542_RDLEN 0x00118
-#define E1000_82542_RDH 0x00120
-#define E1000_82542_RDT 0x00128
-#define E1000_82542_RDTR0 E1000_82542_RDTR
-#define E1000_82542_RDBAL0 E1000_82542_RDBAL
-#define E1000_82542_RDBAH0 E1000_82542_RDBAH
-#define E1000_82542_RDLEN0 E1000_82542_RDLEN
-#define E1000_82542_RDH0 E1000_82542_RDH
-#define E1000_82542_RDT0 E1000_82542_RDT
-#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
- * RX Control - RW */
-#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
-#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
-#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
-#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
-#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
-#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
-#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
-#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
-#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
-#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
-#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
-#define E1000_82542_RDTR1 0x00130
-#define E1000_82542_RDBAL1 0x00138
-#define E1000_82542_RDBAH1 0x0013C
-#define E1000_82542_RDLEN1 0x00140
-#define E1000_82542_RDH1 0x00148
-#define E1000_82542_RDT1 0x00150
-#define E1000_82542_FCRTH 0x00160
-#define E1000_82542_FCRTL 0x00168
-#define E1000_82542_FCTTV E1000_FCTTV
-#define E1000_82542_TXCW E1000_TXCW
-#define E1000_82542_RXCW E1000_RXCW
-#define E1000_82542_MTA 0x00200
-#define E1000_82542_TCTL E1000_TCTL
-#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
-#define E1000_82542_TIPG E1000_TIPG
-#define E1000_82542_TDBAL 0x00420
-#define E1000_82542_TDBAH 0x00424
-#define E1000_82542_TDLEN 0x00428
-#define E1000_82542_TDH 0x00430
-#define E1000_82542_TDT 0x00438
-#define E1000_82542_TIDV 0x00440
-#define E1000_82542_TBT E1000_TBT
-#define E1000_82542_AIT E1000_AIT
-#define E1000_82542_VFTA 0x00600
-#define E1000_82542_LEDCTL E1000_LEDCTL
-#define E1000_82542_PBA E1000_PBA
-#define E1000_82542_PBS E1000_PBS
-#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
-#define E1000_82542_EEARBC E1000_EEARBC
-#define E1000_82542_FLASHT E1000_FLASHT
-#define E1000_82542_EEWR E1000_EEWR
-#define E1000_82542_FLSWCTL E1000_FLSWCTL
-#define E1000_82542_FLSWDATA E1000_FLSWDATA
-#define E1000_82542_FLSWCNT E1000_FLSWCNT
-#define E1000_82542_FLOP E1000_FLOP
-#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
-#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
-#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
-#define E1000_82542_ERT E1000_ERT
-#define E1000_82542_RXDCTL E1000_RXDCTL
-#define E1000_82542_RXDCTL1 E1000_RXDCTL1
-#define E1000_82542_RADV E1000_RADV
-#define E1000_82542_RSRPD E1000_RSRPD
-#define E1000_82542_TXDMAC E1000_TXDMAC
-#define E1000_82542_KABGTXD E1000_KABGTXD
-#define E1000_82542_TDFHS E1000_TDFHS
-#define E1000_82542_TDFTS E1000_TDFTS
-#define E1000_82542_TDFPC E1000_TDFPC
-#define E1000_82542_TXDCTL E1000_TXDCTL
-#define E1000_82542_TADV E1000_TADV
-#define E1000_82542_TSPMT E1000_TSPMT
-#define E1000_82542_CRCERRS E1000_CRCERRS
-#define E1000_82542_ALGNERRC E1000_ALGNERRC
-#define E1000_82542_SYMERRS E1000_SYMERRS
-#define E1000_82542_RXERRC E1000_RXERRC
-#define E1000_82542_MPC E1000_MPC
-#define E1000_82542_SCC E1000_SCC
-#define E1000_82542_ECOL E1000_ECOL
-#define E1000_82542_MCC E1000_MCC
-#define E1000_82542_LATECOL E1000_LATECOL
-#define E1000_82542_COLC E1000_COLC
-#define E1000_82542_DC E1000_DC
-#define E1000_82542_TNCRS E1000_TNCRS
-#define E1000_82542_SEC E1000_SEC
-#define E1000_82542_CEXTERR E1000_CEXTERR
-#define E1000_82542_RLEC E1000_RLEC
-#define E1000_82542_XONRXC E1000_XONRXC
-#define E1000_82542_XONTXC E1000_XONTXC
-#define E1000_82542_XOFFRXC E1000_XOFFRXC
-#define E1000_82542_XOFFTXC E1000_XOFFTXC
-#define E1000_82542_FCRUC E1000_FCRUC
-#define E1000_82542_PRC64 E1000_PRC64
-#define E1000_82542_PRC127 E1000_PRC127
-#define E1000_82542_PRC255 E1000_PRC255
-#define E1000_82542_PRC511 E1000_PRC511
-#define E1000_82542_PRC1023 E1000_PRC1023
-#define E1000_82542_PRC1522 E1000_PRC1522
-#define E1000_82542_GPRC E1000_GPRC
-#define E1000_82542_BPRC E1000_BPRC
-#define E1000_82542_MPRC E1000_MPRC
-#define E1000_82542_GPTC E1000_GPTC
-#define E1000_82542_GORCL E1000_GORCL
-#define E1000_82542_GORCH E1000_GORCH
-#define E1000_82542_GOTCL E1000_GOTCL
-#define E1000_82542_GOTCH E1000_GOTCH
-#define E1000_82542_RNBC E1000_RNBC
-#define E1000_82542_RUC E1000_RUC
-#define E1000_82542_RFC E1000_RFC
-#define E1000_82542_ROC E1000_ROC
-#define E1000_82542_RJC E1000_RJC
-#define E1000_82542_MGTPRC E1000_MGTPRC
-#define E1000_82542_MGTPDC E1000_MGTPDC
-#define E1000_82542_MGTPTC E1000_MGTPTC
-#define E1000_82542_TORL E1000_TORL
-#define E1000_82542_TORH E1000_TORH
-#define E1000_82542_TOTL E1000_TOTL
-#define E1000_82542_TOTH E1000_TOTH
-#define E1000_82542_TPR E1000_TPR
-#define E1000_82542_TPT E1000_TPT
-#define E1000_82542_PTC64 E1000_PTC64
-#define E1000_82542_PTC127 E1000_PTC127
-#define E1000_82542_PTC255 E1000_PTC255
-#define E1000_82542_PTC511 E1000_PTC511
-#define E1000_82542_PTC1023 E1000_PTC1023
-#define E1000_82542_PTC1522 E1000_PTC1522
-#define E1000_82542_MPTC E1000_MPTC
-#define E1000_82542_BPTC E1000_BPTC
-#define E1000_82542_TSCTC E1000_TSCTC
-#define E1000_82542_TSCTFC E1000_TSCTFC
-#define E1000_82542_RXCSUM E1000_RXCSUM
-#define E1000_82542_WUC E1000_WUC
-#define E1000_82542_WUFC E1000_WUFC
-#define E1000_82542_WUS E1000_WUS
-#define E1000_82542_MANC E1000_MANC
-#define E1000_82542_IPAV E1000_IPAV
-#define E1000_82542_IP4AT E1000_IP4AT
-#define E1000_82542_IP6AT E1000_IP6AT
-#define E1000_82542_WUPL E1000_WUPL
-#define E1000_82542_WUPM E1000_WUPM
-#define E1000_82542_FFLT E1000_FFLT
-#define E1000_82542_TDFH 0x08010
-#define E1000_82542_TDFT 0x08018
-#define E1000_82542_FFMT E1000_FFMT
-#define E1000_82542_FFVT E1000_FFVT
-#define E1000_82542_HOST_IF E1000_HOST_IF
-#define E1000_82542_IAM E1000_IAM
-#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
-#define E1000_82542_PSRCTL E1000_PSRCTL
-#define E1000_82542_RAID E1000_RAID
-#define E1000_82542_TARC0 E1000_TARC0
-#define E1000_82542_TDBAL1 E1000_TDBAL1
-#define E1000_82542_TDBAH1 E1000_TDBAH1
-#define E1000_82542_TDLEN1 E1000_TDLEN1
-#define E1000_82542_TDH1 E1000_TDH1
-#define E1000_82542_TDT1 E1000_TDT1
-#define E1000_82542_TXDCTL1 E1000_TXDCTL1
-#define E1000_82542_TARC1 E1000_TARC1
-#define E1000_82542_RFCTL E1000_RFCTL
-#define E1000_82542_GCR E1000_GCR
-#define E1000_82542_GSCL_1 E1000_GSCL_1
-#define E1000_82542_GSCL_2 E1000_GSCL_2
-#define E1000_82542_GSCL_3 E1000_GSCL_3
-#define E1000_82542_GSCL_4 E1000_GSCL_4
-#define E1000_82542_FACTPS E1000_FACTPS
-#define E1000_82542_SWSM E1000_SWSM
-#define E1000_82542_FWSM E1000_FWSM
-#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
-#define E1000_82542_IAC E1000_IAC
-#define E1000_82542_ICRXPTC E1000_ICRXPTC
-#define E1000_82542_ICRXATC E1000_ICRXATC
-#define E1000_82542_ICTXPTC E1000_ICTXPTC
-#define E1000_82542_ICTXATC E1000_ICTXATC
-#define E1000_82542_ICTXQEC E1000_ICTXQEC
-#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
-#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
-#define E1000_82542_ICRXOC E1000_ICRXOC
-#define E1000_82542_HICR E1000_HICR
-
-#define E1000_82542_CPUVEC E1000_CPUVEC
-#define E1000_82542_MRQC E1000_MRQC
-#define E1000_82542_RETA E1000_RETA
-#define E1000_82542_RSSRK E1000_RSSRK
-#define E1000_82542_RSSIM E1000_RSSIM
-#define E1000_82542_RSSIR E1000_RSSIR
-#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
-#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
-
-/* Statistics counters collected by the MAC */
-struct e1000_hw_stats {
- u64 crcerrs;
- u64 algnerrc;
- u64 symerrs;
- u64 rxerrc;
- u64 txerrc;
- u64 mpc;
- u64 scc;
- u64 ecol;
- u64 mcc;
- u64 latecol;
- u64 colc;
- u64 dc;
- u64 tncrs;
- u64 sec;
- u64 cexterr;
- u64 rlec;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 fcruc;
- u64 prc64;
- u64 prc127;
- u64 prc255;
- u64 prc511;
- u64 prc1023;
- u64 prc1522;
- u64 gprc;
- u64 bprc;
- u64 mprc;
- u64 gptc;
- u64 gorcl;
- u64 gorch;
- u64 gotcl;
- u64 gotch;
- u64 rnbc;
- u64 ruc;
- u64 rfc;
- u64 roc;
- u64 rlerrc;
- u64 rjc;
- u64 mgprc;
- u64 mgpdc;
- u64 mgptc;
- u64 torl;
- u64 torh;
- u64 totl;
- u64 toth;
- u64 tpr;
- u64 tpt;
- u64 ptc64;
- u64 ptc127;
- u64 ptc255;
- u64 ptc511;
- u64 ptc1023;
- u64 ptc1522;
- u64 mptc;
- u64 bptc;
- u64 tsctc;
- u64 tsctfc;
- u64 iac;
- u64 icrxptc;
- u64 icrxatc;
- u64 ictxptc;
- u64 ictxatc;
- u64 ictxqec;
- u64 ictxqmtc;
- u64 icrxdmtc;
- u64 icrxoc;
-};
-
-/* Structure containing variables used by the shared code (e1000_hw.c) */
-struct e1000_hw {
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
- e1000_mac_type mac_type;
- e1000_phy_type phy_type;
- u32 phy_init_script;
- e1000_media_type media_type;
- void *back;
- struct e1000_shadow_ram *eeprom_shadow_ram;
- u32 flash_bank_size;
- u32 flash_base_addr;
- e1000_fc_type fc;
- e1000_bus_speed bus_speed;
- e1000_bus_width bus_width;
- e1000_bus_type bus_type;
- struct e1000_eeprom_info eeprom;
- e1000_ms_type master_slave;
- e1000_ms_type original_master_slave;
- e1000_ffe_config ffe_config_state;
- u32 asf_firmware_present;
- u32 eeprom_semaphore_present;
- unsigned long io_base;
- u32 phy_id;
- u32 phy_revision;
- u32 phy_addr;
- u32 original_fc;
- u32 txcw;
- u32 autoneg_failed;
- u32 max_frame_size;
- u32 min_frame_size;
- u32 mc_filter_type;
- u32 num_mc_addrs;
- u32 collision_delta;
- u32 tx_packet_delta;
- u32 ledctl_default;
- u32 ledctl_mode1;
- u32 ledctl_mode2;
- bool tx_pkt_filtering;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
- u16 phy_spd_default;
- u16 autoneg_advertised;
- u16 pci_cmd_word;
- u16 fc_high_water;
- u16 fc_low_water;
- u16 fc_pause_time;
- u16 current_ifs_val;
- u16 ifs_min_val;
- u16 ifs_max_val;
- u16 ifs_step_size;
- u16 ifs_ratio;
- u16 device_id;
- u16 vendor_id;
- u16 subsystem_id;
- u16 subsystem_vendor_id;
- u8 revision_id;
- u8 autoneg;
- u8 mdix;
- u8 forced_speed_duplex;
- u8 wait_autoneg_complete;
- u8 dma_fairness;
- u8 mac_addr[NODE_ADDRESS_SIZE];
- u8 perm_mac_addr[NODE_ADDRESS_SIZE];
- bool disable_polarity_correction;
- bool speed_downgraded;
- e1000_smart_speed smart_speed;
- e1000_dsp_config dsp_config_state;
- bool get_link_status;
- bool serdes_has_link;
- bool tbi_compatibility_en;
- bool tbi_compatibility_on;
- bool laa_is_present;
- bool phy_reset_disable;
- bool initialize_hw_bits_disable;
- bool fc_send_xon;
- bool fc_strict_ieee;
- bool report_tx_early;
- bool adaptive_ifs;
- bool ifs_params_forced;
- bool in_ifs_mode;
- bool mng_reg_access_disabled;
- bool leave_av_bit_off;
- bool bad_tx_carr_stats_fd;
- bool has_smbus;
-};
-
-#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
-#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
-#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
-#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
-#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
-/* Register Bit Masks */
-/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
-#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
-#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
-#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
-#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
-#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
-#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
-#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
-#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
-#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
-#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
-#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
-#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
-#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
-#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
-#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
-#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
-#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
-
-/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
-#define E1000_STATUS_SPEED_MASK 0x000000C0
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
- by EEPROM/Flash */
-#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
-#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
-#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
-#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
-#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
-#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
-#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
-#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
-#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
-#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
-#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
-#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
-#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
-#define E1000_STATUS_FUSE_8 0x04000000
-#define E1000_STATUS_FUSE_9 0x08000000
-#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
-#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
-
-/* Constants used to interpret the masked PCI-X bus speed. */
-#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
-#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
-#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
-
-/* EEPROM/Flash Control */
-#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
-#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
-#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
-#define E1000_EECD_FWE_MASK 0x00000030
-#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
-#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
-#define E1000_EECD_FWE_SHIFT 4
-#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
-#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
-#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
-#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
- * (0-small, 1-large) */
-#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
-#ifndef E1000_EEPROM_GRANT_ATTEMPTS
-#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
-#endif
-#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
-#define E1000_EECD_SIZE_EX_SHIFT 11
-#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
-#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
-#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
-#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
-#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
-#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
-#define E1000_EECD_SECVAL_SHIFT 22
-#define E1000_STM_OPCODE 0xDB00
-#define E1000_HICR_FW_RESET 0xC0
-
-#define E1000_SHADOW_RAM_WORDS 2048
-#define E1000_ICH_NVM_SIG_WORD 0x13
-#define E1000_ICH_NVM_SIG_MASK 0xC0
-
-/* EEPROM Read */
-#define E1000_EERD_START 0x00000001 /* Start Read */
-#define E1000_EERD_DONE 0x00000010 /* Read Done */
-#define E1000_EERD_ADDR_SHIFT 8
-#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
-#define E1000_EERD_DATA_SHIFT 16
-#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
-
-/* SPI EEPROM Status Register */
-#define EEPROM_STATUS_RDY_SPI 0x01
-#define EEPROM_STATUS_WEN_SPI 0x02
-#define EEPROM_STATUS_BP0_SPI 0x04
-#define EEPROM_STATUS_BP1_SPI 0x08
-#define EEPROM_STATUS_WPEN_SPI 0x80
-
-/* Extended Device Control */
-#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
-#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
-#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
-#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
-#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
-#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
-#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
-#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
-#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
-#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
-#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
-#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
-#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
-#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
-#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
-#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
-#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
-#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
-#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
-#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
-#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
-#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
-#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
-#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
-#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
-#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
-#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
-
-/* MDI Control */
-#define E1000_MDIC_DATA_MASK 0x0000FFFF
-#define E1000_MDIC_REG_MASK 0x001F0000
-#define E1000_MDIC_REG_SHIFT 16
-#define E1000_MDIC_PHY_MASK 0x03E00000
-#define E1000_MDIC_PHY_SHIFT 21
-#define E1000_MDIC_OP_WRITE 0x04000000
-#define E1000_MDIC_OP_READ 0x08000000
-#define E1000_MDIC_READY 0x10000000
-#define E1000_MDIC_INT_EN 0x20000000
-#define E1000_MDIC_ERROR 0x40000000
-
-#define INTEL_CE_GBE_MDIC_OP_WRITE 0x04000000
-#define INTEL_CE_GBE_MDIC_OP_READ 0x00000000
-#define INTEL_CE_GBE_MDIC_GO 0x80000000
-#define INTEL_CE_GBE_MDIC_READ_ERROR 0x80000000
-
-#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
-#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
-#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
-#define E1000_KUMCTRLSTA_REN 0x00200000
-
-#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
-#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
-#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
-#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
-#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
-#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
-#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
-#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
-#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
-
-/* FIFO Control */
-#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
-#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
-
-/* In-Band Control */
-#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
-#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
-
-/* Half-Duplex Control */
-#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
-#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
-
-#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
-
-#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
-#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
-
-#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
-#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
-#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
-
-#define E1000_KABGTXD_BGSQLBIAS 0x00050000
-
-#define E1000_PHY_CTRL_SPD_EN 0x00000001
-#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
-#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
-#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
-#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
-#define E1000_PHY_CTRL_B2B_EN 0x00000080
-
-/* LED Control */
-#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
-#define E1000_LEDCTL_LED0_MODE_SHIFT 0
-#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
-#define E1000_LEDCTL_LED0_IVRT 0x00000040
-#define E1000_LEDCTL_LED0_BLINK 0x00000080
-#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
-#define E1000_LEDCTL_LED1_MODE_SHIFT 8
-#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
-#define E1000_LEDCTL_LED1_IVRT 0x00004000
-#define E1000_LEDCTL_LED1_BLINK 0x00008000
-#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
-#define E1000_LEDCTL_LED2_MODE_SHIFT 16
-#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
-#define E1000_LEDCTL_LED2_IVRT 0x00400000
-#define E1000_LEDCTL_LED2_BLINK 0x00800000
-#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
-#define E1000_LEDCTL_LED3_MODE_SHIFT 24
-#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
-#define E1000_LEDCTL_LED3_IVRT 0x40000000
-#define E1000_LEDCTL_LED3_BLINK 0x80000000
-
-#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
-#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
-#define E1000_LEDCTL_MODE_LINK_UP 0x2
-#define E1000_LEDCTL_MODE_ACTIVITY 0x3
-#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
-#define E1000_LEDCTL_MODE_LINK_10 0x5
-#define E1000_LEDCTL_MODE_LINK_100 0x6
-#define E1000_LEDCTL_MODE_LINK_1000 0x7
-#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
-#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
-#define E1000_LEDCTL_MODE_COLLISION 0xA
-#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
-#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
-#define E1000_LEDCTL_MODE_PAUSED 0xD
-#define E1000_LEDCTL_MODE_LED_ON 0xE
-#define E1000_LEDCTL_MODE_LED_OFF 0xF
-
-/* Receive Address */
-#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
-
-/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXO 0x00000040 /* rx overrun */
-#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
-#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
-#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
-#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
-#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
-#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
-#define E1000_ICR_TXD_LOW 0x00008000
-#define E1000_ICR_SRPD 0x00010000
-#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
-#define E1000_ICR_MNG 0x00040000 /* Manageability event */
-#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
-#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
-#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
-#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
-#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
-#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
-
-/* Interrupt Cause Set */
-#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
-#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_ICS_SRPD E1000_ICR_SRPD
-#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_ICS_DSW E1000_ICR_DSW
-#define E1000_ICS_PHYINT E1000_ICR_PHYINT
-#define E1000_ICS_EPRST E1000_ICR_EPRST
-
-/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
-#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_IMS_SRPD E1000_ICR_SRPD
-#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_IMS_DSW E1000_ICR_DSW
-#define E1000_IMS_PHYINT E1000_ICR_PHYINT
-#define E1000_IMS_EPRST E1000_ICR_EPRST
-
-/* Interrupt Mask Clear */
-#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
-#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
-#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
-#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
-#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
-#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
-#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
-#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
-#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
-#define E1000_IMC_SRPD E1000_ICR_SRPD
-#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
-#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
-#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
-#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
-#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
-#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
-#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
-#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
-#define E1000_IMC_DSW E1000_ICR_DSW
-#define E1000_IMC_PHYINT E1000_ICR_PHYINT
-#define E1000_IMC_EPRST E1000_ICR_EPRST
-
-/* Receive Control */
-#define E1000_RCTL_RST 0x00000001 /* Software reset */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
-#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
-#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
-#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
-#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
-#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
-#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
-#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
-#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
-#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
-#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
-
-/* Use byte values for the following shift parameters
- * Usage:
- * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- * E1000_PSRCTL_BSIZE0_MASK) |
- * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- * E1000_PSRCTL_BSIZE1_MASK) |
- * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- * E1000_PSRCTL_BSIZE2_MASK) |
- * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- * E1000_PSRCTL_BSIZE3_MASK))
- * where value0 = [128..16256], default=256
- * value1 = [1024..64512], default=4096
- * value2 = [0..64512], default=4096
- * value3 = [0..64512], default=0
- */
-
-#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
-
-#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
-
-/* SW_W_SYNC definitions */
-#define E1000_SWFW_EEP_SM 0x0001
-#define E1000_SWFW_PHY0_SM 0x0002
-#define E1000_SWFW_PHY1_SM 0x0004
-#define E1000_SWFW_MAC_CSR_SM 0x0008
-
-/* Receive Descriptor */
-#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
-#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
-#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
-#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
-#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
-
-/* Flow Control */
-#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
-#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
-
-/* Header split receive */
-#define E1000_RFCTL_ISCSI_DIS 0x00000001
-#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
-#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
-#define E1000_RFCTL_NFSW_DIS 0x00000040
-#define E1000_RFCTL_NFSR_DIS 0x00000080
-#define E1000_RFCTL_NFS_VER_MASK 0x00000300
-#define E1000_RFCTL_NFS_VER_SHIFT 8
-#define E1000_RFCTL_IPV6_DIS 0x00000400
-#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
-#define E1000_RFCTL_ACK_DIS 0x00001000
-#define E1000_RFCTL_ACKD_DIS 0x00002000
-#define E1000_RFCTL_IPFRSP_DIS 0x00004000
-#define E1000_RFCTL_EXTEN 0x00008000
-#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
-#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
-
-/* Receive Descriptor Control */
-#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
-#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
-#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
-#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
-
-/* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
-#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
- still to be processed. */
-/* Transmit Configuration Word */
-#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
-#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
-#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
-#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
-#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
-#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
-
-/* Receive Configuration Word */
-#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
-#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
-#define E1000_RXCW_CC 0x10000000 /* Receive config change */
-#define E1000_RXCW_C 0x20000000 /* Receive config */
-#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
-#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
-
-/* Transmit Control */
-#define E1000_TCTL_RST 0x00000001 /* software reset */
-#define E1000_TCTL_EN 0x00000002 /* enable tx */
-#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
-#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
-#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
-#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
-#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
-#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
-/* Extended Transmit Control */
-#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
-#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
-
-/* Receive Checksum Control */
-#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
-#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
-#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
-#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
-
-/* Multiple Receive Queue Control */
-#define E1000_MRQC_ENABLE_MASK 0x00000003
-#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
-#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
-#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
-#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
-#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
-#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
-#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
-#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
-#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
-
-/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
-#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
-#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
-#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
-#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
-#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
-#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
-#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
-#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
-#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
-#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
-
-/* Wake Up Status */
-#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
-#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
-#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
-#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
-#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
-#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
-#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
-#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
-#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
-#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
-#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
-#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
-#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
-
-/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
-#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
-#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
-#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
-#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
-#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
-#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
- * Filtering */
-#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
-#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
-#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
- * filtering */
-#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
- * memory */
-#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
- * filtering */
-#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
-#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
-#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
-#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
-#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
-#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
-#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
-#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
-
-#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
-#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
-
-/* SW Semaphore Register */
-#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
-#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
-
-/* FW Semaphore Register */
-#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
-#define E1000_FWSM_MODE_SHIFT 1
-#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
-
-#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
-#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
-#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
-#define E1000_FWSM_SKUEL_SHIFT 29
-#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
-#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
-#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
-#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
-
-/* FFLT Debug Register */
-#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
-
-typedef enum {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_interface_only
-} e1000_mng_mode;
-
-/* Host Interface Control Register */
-#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
-#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
- * to put command in RAM */
-#define E1000_HICR_SV 0x00000004 /* Status Validity */
-#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
-
-/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
-#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
-#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
-#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
-#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
-
-struct e1000_host_command_header {
- u8 command_id;
- u8 command_length;
- u8 command_options; /* I/F bits for command, status for return */
- u8 checksum;
-};
-struct e1000_host_command_info {
- struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
- u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
-};
-
-/* Host SMB register #0 */
-#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
-#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
-#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
-#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
-
-/* Host SMB register #1 */
-#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
-#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
-#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
-#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
-
-/* FW Status Register */
-#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
-
-/* Wake Up Packet Length */
-#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
-
-#define E1000_MDALIGN 4096
-
-/* PCI-Ex registers*/
-
-/* PCI-Ex Control Register */
-#define E1000_GCR_RXD_NO_SNOOP 0x00000001
-#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
-#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
-#define E1000_GCR_TXD_NO_SNOOP 0x00000008
-#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
-#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
-
-#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
- E1000_GCR_RXDSCW_NO_SNOOP | \
- E1000_GCR_RXDSCR_NO_SNOOP | \
- E1000_GCR_TXD_NO_SNOOP | \
- E1000_GCR_TXDSCW_NO_SNOOP | \
- E1000_GCR_TXDSCR_NO_SNOOP)
-
-#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
-
-#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
-/* Function Active and Power State to MNG */
-#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
-#define E1000_FACTPS_LAN0_VALID 0x00000004
-#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
-#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
-#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
-#define E1000_FACTPS_LAN1_VALID 0x00000100
-#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
-#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
-#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
-#define E1000_FACTPS_IDE_ENABLE 0x00004000
-#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
-#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
-#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
-#define E1000_FACTPS_SP_ENABLE 0x00100000
-#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
-#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
-#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
-#define E1000_FACTPS_IPMI_ENABLE 0x04000000
-#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
-#define E1000_FACTPS_MNGCG 0x20000000
-#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
-#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
-
-/* PCI-Ex Config Space */
-#define PCI_EX_LINK_STATUS 0x12
-#define PCI_EX_LINK_WIDTH_MASK 0x3F0
-#define PCI_EX_LINK_WIDTH_SHIFT 4
-
-/* EEPROM Commands - Microwire */
-#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
-#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
-#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
-#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
-
-/* EEPROM Commands - SPI */
-#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
-#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
-#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
-#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
-#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
-#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
-#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
-#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
-#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
-
-/* EEPROM Size definitions */
-#define EEPROM_WORD_SIZE_SHIFT 6
-#define EEPROM_SIZE_SHIFT 10
-#define EEPROM_SIZE_MASK 0x1C00
-
-/* EEPROM Word Offsets */
-#define EEPROM_COMPAT 0x0003
-#define EEPROM_ID_LED_SETTINGS 0x0004
-#define EEPROM_VERSION 0x0005
-#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
-#define EEPROM_PHY_CLASS_WORD 0x0007
-#define EEPROM_INIT_CONTROL1_REG 0x000A
-#define EEPROM_INIT_CONTROL2_REG 0x000F
-#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
-#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
-#define EEPROM_INIT_3GIO_3 0x001A
-#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
-#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
-#define EEPROM_CFG 0x0012
-#define EEPROM_FLASH_VERSION 0x0032
-#define EEPROM_CHECKSUM_REG 0x003F
-
-#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
-#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
-
-/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000 0x0000
-#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
- (ID_LED_OFF1_OFF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2 0x1
-#define ID_LED_DEF1_ON2 0x2
-#define ID_LED_DEF1_OFF2 0x3
-#define ID_LED_ON1_DEF2 0x4
-#define ID_LED_ON1_ON2 0x5
-#define ID_LED_ON1_OFF2 0x6
-#define ID_LED_OFF1_DEF2 0x7
-#define ID_LED_OFF1_ON2 0x8
-#define ID_LED_OFF1_OFF2 0x9
-
-#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE 0x0300
-#define IGP_LED3_MODE 0x07000000
-
-/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
-#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
-
-/* Mask bit for PHY class in Word 7 of the EEPROM */
-#define EEPROM_PHY_CLASS_A 0x8000
-
-/* Mask bits for fields in Word 0x0a of the EEPROM */
-#define EEPROM_WORD0A_ILOS 0x0010
-#define EEPROM_WORD0A_SWDPIO 0x01E0
-#define EEPROM_WORD0A_LRST 0x0200
-#define EEPROM_WORD0A_FD 0x0400
-#define EEPROM_WORD0A_66MHZ 0x0800
-
-/* Mask bits for fields in Word 0x0f of the EEPROM */
-#define EEPROM_WORD0F_PAUSE_MASK 0x3000
-#define EEPROM_WORD0F_PAUSE 0x1000
-#define EEPROM_WORD0F_ASM_DIR 0x2000
-#define EEPROM_WORD0F_ANE 0x0800
-#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
-#define EEPROM_WORD0F_LPLU 0x0001
-
-/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
-#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
-#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
-
-/* Mask bits for fields in Word 0x1a of the EEPROM */
-#define EEPROM_WORD1A_ASPM_MASK 0x000C
-
-/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
-#define EEPROM_SUM 0xBABA
-
-/* EEPROM Map defines (WORD OFFSETS)*/
-#define EEPROM_NODE_ADDRESS_BYTE_0 0
-#define EEPROM_PBA_BYTE_1 8
-
-#define EEPROM_RESERVED_WORD 0xFFFF
-
-/* EEPROM Map Sizes (Byte Counts) */
-#define PBA_SIZE 4
-
-/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD 15
-#define E1000_CT_SHIFT 4
-/* Collision distance is a 0-based value that applies to
- * half-duplex-capable hardware only. */
-#define E1000_COLLISION_DISTANCE 63
-#define E1000_COLLISION_DISTANCE_82542 64
-#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
-#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
-#define E1000_COLD_SHIFT 12
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* Default values for the transmit IPG register */
-#define DEFAULT_82542_TIPG_IPGT 10
-#define DEFAULT_82543_TIPG_IPGT_FIBER 9
-#define DEFAULT_82543_TIPG_IPGT_COPPER 8
-
-#define E1000_TIPG_IPGT_MASK 0x000003FF
-#define E1000_TIPG_IPGR1_MASK 0x000FFC00
-#define E1000_TIPG_IPGR2_MASK 0x3FF00000
-
-#define DEFAULT_82542_TIPG_IPGR1 2
-#define DEFAULT_82543_TIPG_IPGR1 8
-#define E1000_TIPG_IPGR1_SHIFT 10
-
-#define DEFAULT_82542_TIPG_IPGR2 10
-#define DEFAULT_82543_TIPG_IPGR2 6
-#define E1000_TIPG_IPGR2_SHIFT 20
-
-#define E1000_TXDMAC_DPP 0x00000001
-
-/* Adaptive IFS defines */
-#define TX_THRESHOLD_START 8
-#define TX_THRESHOLD_INCREMENT 10
-#define TX_THRESHOLD_DECREMENT 1
-#define TX_THRESHOLD_STOP 190
-#define TX_THRESHOLD_DISABLE 0
-#define TX_THRESHOLD_TIMER_MS 10000
-#define MIN_NUM_XMITS 1000
-#define IFS_MAX 80
-#define IFS_STEP 10
-#define IFS_MIN 40
-#define IFS_RATIO 4
-
-/* Extended Configuration Control and Size */
-#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
-#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
-#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
-#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
-#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
-#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
-#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
-
-#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
-#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
-#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
-#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
-
-/* PBA constants */
-#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
-#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
-#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
-#define E1000_PBA_20K 0x0014
-#define E1000_PBA_22K 0x0016
-#define E1000_PBA_24K 0x0018
-#define E1000_PBA_30K 0x001E
-#define E1000_PBA_32K 0x0020
-#define E1000_PBA_34K 0x0022
-#define E1000_PBA_38K 0x0026
-#define E1000_PBA_40K 0x0028
-#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
-
-#define E1000_PBS_16K E1000_PBA_16K
-
-/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE 0x8808
-
-/* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
-#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
-#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
-
-/* PCIX Config space */
-#define PCIX_COMMAND_REGISTER 0xE6
-#define PCIX_STATUS_REGISTER_LO 0xE8
-#define PCIX_STATUS_REGISTER_HI 0xEA
-
-#define PCIX_COMMAND_MMRBC_MASK 0x000C
-#define PCIX_COMMAND_MMRBC_SHIFT 0x2
-#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
-#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
-#define PCIX_STATUS_HI_MMRBC_4K 0x3
-#define PCIX_STATUS_HI_MMRBC_2K 0x2
-
-/* Number of bits required to shift right the "pause" bits from the
- * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
- */
-#define PAUSE_SHIFT 5
-
-/* Number of bits required to shift left the "SWDPIO" bits from the
- * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
- */
-#define SWDPIO_SHIFT 17
-
-/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
- * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
- */
-#define SWDPIO__EXT_SHIFT 4
-
-/* Number of bits required to shift left the "ILOS" bit from the EEPROM
- * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
- */
-#define ILOS_SHIFT 3
-
-#define RECEIVE_BUFFER_ALIGN_SIZE (256)
-
-/* Number of milliseconds we wait for auto-negotiation to complete */
-#define LINK_UP_TIMEOUT 500
-
-/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
-#define AUTO_READ_DONE_TIMEOUT 10
-/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT 100
-
-#define E1000_TX_BUFFER_SIZE ((u32)1514)
-
-/* The carrier extension symbol, as received by the NIC. */
-#define CARRIER_EXTENSION 0x0F
-
-/* TBI_ACCEPT macro definition:
- *
- * This macro requires:
- * adapter = a pointer to struct e1000_hw
- * status = the 8 bit status field of the RX descriptor with EOP set
- * error = the 8 bit error field of the RX descriptor with EOP set
- * length = the sum of all the length fields of the RX descriptors that
- * make up the current frame
- * last_byte = the last byte of the frame DMAed by the hardware
- * max_frame_length = the maximum frame length we want to accept.
- * min_frame_length = the minimum frame length we want to accept.
- *
- * This macro is a conditional that should be used in the interrupt
- * handler's Rx processing routine when RxErrors have been detected.
- *
- * Typical use:
- * ...
- * if (TBI_ACCEPT) {
- * accept_frame = true;
- * e1000_tbi_adjust_stats(adapter, MacAddress);
- * frame_length--;
- * } else {
- * accept_frame = false;
- * }
- * ...
- */
-
-#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
- ((adapter)->tbi_compatibility_on && \
- (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
- ((last_byte) == CARRIER_EXTENSION) && \
- (((status) & E1000_RXD_STAT_VP) ? \
- (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
- ((length) <= ((adapter)->max_frame_size + 1))) : \
- (((length) > (adapter)->min_frame_size) && \
- ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
-
-/* Structures, enums, and macros for the PHY */
-
-/* Bit definitions for the Management Data IO (MDIO) and Management Data
- * Clock (MDC) pins in the Device Control Register.
- */
-#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
-#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
-#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
-#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
-#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
-#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
-#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
-#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-#define PHY_CTRL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Register */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
-#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
-#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
-
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
-
-/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
-#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
-
-#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
-#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
-#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
-#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
-
-#define IGP01E1000_IEEE_REGS_PAGE 0x0000
-#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
-#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
-
-/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
-#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
-#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
-#define IGP02E1000_PHY_POWER_MGMT 0x19
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
-
-/* IGP01E1000 AGC Registers - stores the cable length values*/
-#define IGP01E1000_PHY_AGC_A 0x1172
-#define IGP01E1000_PHY_AGC_B 0x1272
-#define IGP01E1000_PHY_AGC_C 0x1472
-#define IGP01E1000_PHY_AGC_D 0x1872
-
-/* IGP02E1000 AGC Registers for cable length values */
-#define IGP02E1000_PHY_AGC_A 0x11B1
-#define IGP02E1000_PHY_AGC_B 0x12B1
-#define IGP02E1000_PHY_AGC_C 0x14B1
-#define IGP02E1000_PHY_AGC_D 0x18B1
-
-/* IGP01E1000 DSP Reset Register */
-#define IGP01E1000_PHY_DSP_RESET 0x1F33
-#define IGP01E1000_PHY_DSP_SET 0x1F71
-#define IGP01E1000_PHY_DSP_FFE 0x1F35
-
-#define IGP01E1000_PHY_CHANNEL_NUM 4
-#define IGP02E1000_PHY_CHANNEL_NUM 4
-
-#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
-#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
-#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
-#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
-
-#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
-#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
-
-#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
-#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
-#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
-#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
-
-#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
-/* IGP01E1000 PCS Initialization register - stores the polarity status when
- * speed = 1000 Mbps. */
-#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
-#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
-
-#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
-
-/* PHY Control Register */
-#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-
-/* PHY Status Register */
-#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
-#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
-#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
-#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
-#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
-#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
-#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
-#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
-#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
-#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
-#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
-
-/* Autoneg Advertisement Register */
-#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
-#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
-
-/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
-#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
-#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
-#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
-#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
-#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
-#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
-#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
-#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
-
-/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
-#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
-#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
-#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
-#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
-
-/* Next Page TX Register */
-#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
-
-/* Link Partner Next Page Register */
-#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
-#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
- * of different NP
- */
-#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
- * 0 = cannot comply with msg
- */
-#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
-#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
-#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
- * 0 = sending last NP
- */
-
-/* 1000BASE-T Control Register */
-#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
- /* 0=DTE device */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
-#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
-#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
-#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
-#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
-#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
-
-/* 1000BASE-T Status Register */
-#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
-#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
-#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
-#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
-#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
-#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
-#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
-#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
-#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
-
-/* Extended Status Register */
-#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
-#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
-#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
-#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
-
-#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
-#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
-
-#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
- /* (0=enable, 1=disable) */
-
-/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
-#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
- * 0=CLK125 toggling
- */
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
- * 100BASE-TX/10BASE-T:
- * MDI Mode
- */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
- * all speeds.
- */
-#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
- /* 1=Enable Extended 10BASE-T distance
- * (Lower 10BASE-T RX Threshold)
- * 0=Normal 10BASE-T RX Threshold */
-#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
- /* 1=5-Bit interface in 100BASE-TX
- * 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
-#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-
-#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
-#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
-#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
-
-/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
- * 3=110-140M;4=>140M */
-#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
-#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
-#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
-#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
-#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
-#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
-#define M88E1000_PSSR_MDIX_SHIFT 6
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-
-/* M88E1000 Extended PHY Specific Control Register */
-#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
-#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
- * Will assert lost lock and bring
- * link down if idle not seen
- * within 1ms in 1000BASE-T
- */
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the master */
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
-/* Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave */
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
-#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
-#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
-
-/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
-
-/* IGP01E1000 Specific Port Config Register - R/W */
-#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
-#define IGP01E1000_PSCFR_PRE_EN 0x0020
-#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
-#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
-#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
-#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
-
-/* IGP01E1000 Specific Port Status Register - R/O */
-#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
-#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
-#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
-#define IGP01E1000_PSSR_LINK_UP 0x0400
-#define IGP01E1000_PSSR_MDIX 0x0800
-#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
-#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
-#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
-#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
-#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
-#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
-
-/* IGP01E1000 Specific Port Control Register - R/W */
-#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
-#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
-#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
-#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
-#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
-
-/* IGP01E1000 Specific Port Link Health Register */
-#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
-#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
-#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
-#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
-#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
-#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
-#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
-#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
-#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
-#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
-#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
-#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
-#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
-#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
-
-/* IGP01E1000 Channel Quality Register */
-#define IGP01E1000_MSE_CHANNEL_D 0x000F
-#define IGP01E1000_MSE_CHANNEL_C 0x00F0
-#define IGP01E1000_MSE_CHANNEL_B 0x0F00
-#define IGP01E1000_MSE_CHANNEL_A 0xF000
-
-#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
-#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
-#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
-
-/* IGP01E1000 DSP reset macros */
-#define DSP_RESET_ENABLE 0x0
-#define DSP_RESET_DISABLE 0x2
-#define E1000_MAX_DSP_RESETS 10
-
-/* IGP01E1000 & IGP02E1000 AGC Registers */
-
-#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
-#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
-
-/* IGP02E1000 AGC Register Length 9-bit mask */
-#define IGP02E1000_AGC_LENGTH_MASK 0x7F
-
-/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
-#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
-#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
-
-/* The precision error of the cable length is +/- 10 meters */
-#define IGP01E1000_AGC_RANGE 10
-#define IGP02E1000_AGC_RANGE 15
-
-/* IGP01E1000 PCS Initialization register */
-/* bits 3:6 in the PCS registers stores the channels polarity */
-#define IGP01E1000_PHY_POLARITY_MASK 0x0078
-
-/* IGP01E1000 GMII FIFO Register */
-#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
- * on Link-Up */
-#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
-
-/* IGP01E1000 Analog Register */
-#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
-#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
-#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
-#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
-
-#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
-#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
-#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
-#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
-#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
-
-#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
-#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
-#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
-#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
-
-/* Bit definitions for valid PHY IDs. */
-/* I = Integrated
- * E = External
- */
-#define M88_VENDOR 0x0141
-#define M88E1000_E_PHY_ID 0x01410C50
-#define M88E1000_I_PHY_ID 0x01410C30
-#define M88E1011_I_PHY_ID 0x01410C20
-#define IGP01E1000_I_PHY_ID 0x02A80380
-#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
-#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
-#define M88E1011_I_REV_4 0x04
-#define M88E1111_I_PHY_ID 0x01410CC0
-#define M88E1118_E_PHY_ID 0x01410E40
-#define L1LXT971A_PHY_ID 0x001378E0
-
-#define RTL8211B_PHY_ID 0x001CC910
-#define RTL8201N_PHY_ID 0x8200
-#define RTL_PHY_CTRL_FD 0x0100 /* Full duplex.0=half; 1=full */
-#define RTL_PHY_CTRL_SPD_100 0x200000 /* Force 100Mb */
-
-/* Bits...
- * 15-5: page
- * 4-0: register offset
- */
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) \
- (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-
-#define IGP3_PHY_PORT_CTRL \
- PHY_REG(769, 17) /* Port General Configuration */
-#define IGP3_PHY_RATE_ADAPT_CTRL \
- PHY_REG(769, 25) /* Rate Adapter Control Register */
-
-#define IGP3_KMRN_FIFO_CTRL_STATS \
- PHY_REG(770, 16) /* KMRN FIFO's control/status register */
-#define IGP3_KMRN_POWER_MNG_CTRL \
- PHY_REG(770, 17) /* KMRN Power Management Control Register */
-#define IGP3_KMRN_INBAND_CTRL \
- PHY_REG(770, 18) /* KMRN Inband Control Register */
-#define IGP3_KMRN_DIAG \
- PHY_REG(770, 19) /* KMRN Diagnostic register */
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
-#define IGP3_KMRN_ACK_TIMEOUT \
- PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
-
-#define IGP3_VR_CTRL \
- PHY_REG(776, 18) /* Voltage regulator control register */
-#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
-#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
-
-#define IGP3_CAPABILITY \
- PHY_REG(776, 19) /* IGP3 Capability Register */
-
-/* Capabilities for SKU Control */
-#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
-#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
-#define IGP3_CAP_ASF 0x0004 /* Support ASF */
-#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
-#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
-#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
-#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
-#define IGP3_CAP_RSS 0x0080 /* Support RSS */
-#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
-#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
-
-#define IGP3_PPC_JORDAN_EN 0x0001
-#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
-
-#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
-#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
-#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
-#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
-
-#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
-#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
-
-#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
-#define IGP3_KMRN_EC_DIS_INBAND 0x0080
-
-#define IGP03E1000_E_PHY_ID 0x02A80390
-#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
-#define IFE_PLUS_E_PHY_ID 0x02A80320
-#define IFE_C_E_PHY_ID 0x02A80310
-
-#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
-#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
-#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
-#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
-#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
-#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
-#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
-#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
-#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
-#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
-#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
-#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
-#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
-
-#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
-#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
-#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
-#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
-#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
-#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
-#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
-#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
-
-#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
-#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
-#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
-#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
-#define IFE_PSC_FORCE_POLARITY_SHIFT 5
-#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
-
-#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
-#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
-#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
-#define IFE_PMC_MDIX_MODE_SHIFT 6
-#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
-
-#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
-#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
-#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
-#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
-#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
-#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
-#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
-#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
-#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
-#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
-#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
-
-#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
-#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
-#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
-#define ICH_FLASH_SEG_SIZE_256 256
-#define ICH_FLASH_SEG_SIZE_4K 4096
-#define ICH_FLASH_SEG_SIZE_64K 65536
-
-#define ICH_CYCLE_READ 0x0
-#define ICH_CYCLE_RESERVED 0x1
-#define ICH_CYCLE_WRITE 0x2
-#define ICH_CYCLE_ERASE 0x3
-
-#define ICH_FLASH_GFPREG 0x0000
-#define ICH_FLASH_HSFSTS 0x0004
-#define ICH_FLASH_HSFCTL 0x0006
-#define ICH_FLASH_FADDR 0x0008
-#define ICH_FLASH_FDATA0 0x0010
-#define ICH_FLASH_FRACC 0x0050
-#define ICH_FLASH_FREG0 0x0054
-#define ICH_FLASH_FREG1 0x0058
-#define ICH_FLASH_FREG2 0x005C
-#define ICH_FLASH_FREG3 0x0060
-#define ICH_FLASH_FPR0 0x0074
-#define ICH_FLASH_FPR1 0x0078
-#define ICH_FLASH_SSFSTS 0x0090
-#define ICH_FLASH_SSFCTL 0x0092
-#define ICH_FLASH_PREOP 0x0094
-#define ICH_FLASH_OPTYPE 0x0096
-#define ICH_FLASH_OPMENU 0x0098
-
-#define ICH_FLASH_REG_MAPSIZE 0x00A0
-#define ICH_FLASH_SECTOR_SIZE 4096
-#define ICH_GFPREG_BASE_MASK 0x1FFF
-#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
-
-/* Miscellaneous PHY bit definitions. */
-#define PHY_PREAMBLE 0xFFFFFFFF
-#define PHY_SOF 0x01
-#define PHY_OP_READ 0x02
-#define PHY_OP_WRITE 0x01
-#define PHY_TURNAROUND 0x02
-#define PHY_PREAMBLE_SIZE 32
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-#define E1000_PHY_ADDRESS 0x01
-#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
-#define PHY_REVISION_MASK 0xFFFFFFF0
-#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
-#define REG4_SPEED_MASK 0x01E0
-#define REG9_SPEED_MASK 0x0300
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010
-#define ADVERTISE_1000_FULL 0x0020
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
-#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
-#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
-
-#endif /* _E1000_HW_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000.h"
-#include <net/ip6_checksum.h>
-#include <linux/io.h>
-#include <linux/prefetch.h>
-#include <linux/bitops.h>
-#include <linux/if_vlan.h>
-
-/* Intel Media SOC GbE MDIO physical base address */
-static unsigned long ce4100_gbe_mdio_base_phy;
-/* Intel Media SOC GbE MDIO virtual base address */
-void __iomem *ce4100_gbe_mdio_base_virt;
-
-char e1000_driver_name[] = "e1000";
-static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.21-k8-NAPI"
-const char e1000_driver_version[] = DRV_VERSION;
-static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
-
-/* e1000_pci_tbl - PCI Device ID Table
- *
- * Last entry must be all 0s
- *
- * Macro expands to...
- * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
- */
-static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
- INTEL_E1000_ETHERNET_DEVICE(0x1000),
- INTEL_E1000_ETHERNET_DEVICE(0x1001),
- INTEL_E1000_ETHERNET_DEVICE(0x1004),
- INTEL_E1000_ETHERNET_DEVICE(0x1008),
- INTEL_E1000_ETHERNET_DEVICE(0x1009),
- INTEL_E1000_ETHERNET_DEVICE(0x100C),
- INTEL_E1000_ETHERNET_DEVICE(0x100D),
- INTEL_E1000_ETHERNET_DEVICE(0x100E),
- INTEL_E1000_ETHERNET_DEVICE(0x100F),
- INTEL_E1000_ETHERNET_DEVICE(0x1010),
- INTEL_E1000_ETHERNET_DEVICE(0x1011),
- INTEL_E1000_ETHERNET_DEVICE(0x1012),
- INTEL_E1000_ETHERNET_DEVICE(0x1013),
- INTEL_E1000_ETHERNET_DEVICE(0x1014),
- INTEL_E1000_ETHERNET_DEVICE(0x1015),
- INTEL_E1000_ETHERNET_DEVICE(0x1016),
- INTEL_E1000_ETHERNET_DEVICE(0x1017),
- INTEL_E1000_ETHERNET_DEVICE(0x1018),
- INTEL_E1000_ETHERNET_DEVICE(0x1019),
- INTEL_E1000_ETHERNET_DEVICE(0x101A),
- INTEL_E1000_ETHERNET_DEVICE(0x101D),
- INTEL_E1000_ETHERNET_DEVICE(0x101E),
- INTEL_E1000_ETHERNET_DEVICE(0x1026),
- INTEL_E1000_ETHERNET_DEVICE(0x1027),
- INTEL_E1000_ETHERNET_DEVICE(0x1028),
- INTEL_E1000_ETHERNET_DEVICE(0x1075),
- INTEL_E1000_ETHERNET_DEVICE(0x1076),
- INTEL_E1000_ETHERNET_DEVICE(0x1077),
- INTEL_E1000_ETHERNET_DEVICE(0x1078),
- INTEL_E1000_ETHERNET_DEVICE(0x1079),
- INTEL_E1000_ETHERNET_DEVICE(0x107A),
- INTEL_E1000_ETHERNET_DEVICE(0x107B),
- INTEL_E1000_ETHERNET_DEVICE(0x107C),
- INTEL_E1000_ETHERNET_DEVICE(0x108A),
- INTEL_E1000_ETHERNET_DEVICE(0x1099),
- INTEL_E1000_ETHERNET_DEVICE(0x10B5),
- INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
- /* required last entry */
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
-
-int e1000_up(struct e1000_adapter *adapter);
-void e1000_down(struct e1000_adapter *adapter);
-void e1000_reinit_locked(struct e1000_adapter *adapter);
-void e1000_reset(struct e1000_adapter *adapter);
-int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
-int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
-void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
-void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
-static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *txdr);
-static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rxdr);
-static void e1000_free_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
-static void e1000_free_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
-void e1000_update_stats(struct e1000_adapter *adapter);
-
-static int e1000_init_module(void);
-static void e1000_exit_module(void);
-static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void __devexit e1000_remove(struct pci_dev *pdev);
-static int e1000_alloc_queues(struct e1000_adapter *adapter);
-static int e1000_sw_init(struct e1000_adapter *adapter);
-static int e1000_open(struct net_device *netdev);
-static int e1000_close(struct net_device *netdev);
-static void e1000_configure_tx(struct e1000_adapter *adapter);
-static void e1000_configure_rx(struct e1000_adapter *adapter);
-static void e1000_setup_rctl(struct e1000_adapter *adapter);
-static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
-static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
-static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
-static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring);
-static void e1000_set_rx_mode(struct net_device *netdev);
-static void e1000_update_phy_info(unsigned long data);
-static void e1000_update_phy_info_task(struct work_struct *work);
-static void e1000_watchdog(unsigned long data);
-static void e1000_82547_tx_fifo_stall(unsigned long data);
-static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
-static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev);
-static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
-static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
-static int e1000_set_mac(struct net_device *netdev, void *p);
-static irqreturn_t e1000_intr(int irq, void *data);
-static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring);
-static int e1000_clean(struct napi_struct *napi, int budget);
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
-static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do);
-static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int cleaned_count);
-static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int cleaned_count);
-static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
-static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
- int cmd);
-static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
-static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
-static void e1000_tx_timeout(struct net_device *dev);
-static void e1000_reset_task(struct work_struct *work);
-static void e1000_smartspeed(struct e1000_adapter *adapter);
-static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
- struct sk_buff *skb);
-
-static bool e1000_vlan_used(struct e1000_adapter *adapter);
-static void e1000_vlan_mode(struct net_device *netdev, u32 features);
-static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
-static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
-static void e1000_restore_vlan(struct e1000_adapter *adapter);
-
-#ifdef CONFIG_PM
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
-static int e1000_resume(struct pci_dev *pdev);
-#endif
-static void e1000_shutdown(struct pci_dev *pdev);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/* for netdump / net console */
-static void e1000_netpoll (struct net_device *netdev);
-#endif
-
-#define COPYBREAK_DEFAULT 256
-static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
-module_param(copybreak, uint, 0644);
-MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
-
-static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state);
-static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
-static void e1000_io_resume(struct pci_dev *pdev);
-
-static struct pci_error_handlers e1000_err_handler = {
- .error_detected = e1000_io_error_detected,
- .slot_reset = e1000_io_slot_reset,
- .resume = e1000_io_resume,
-};
-
-static struct pci_driver e1000_driver = {
- .name = e1000_driver_name,
- .id_table = e1000_pci_tbl,
- .probe = e1000_probe,
- .remove = __devexit_p(e1000_remove),
-#ifdef CONFIG_PM
- /* Power Management Hooks */
- .suspend = e1000_suspend,
- .resume = e1000_resume,
-#endif
- .shutdown = e1000_shutdown,
- .err_handler = &e1000_err_handler
-};
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
-MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-
-/**
- * e1000_get_hw_dev - return device
- * used by hardware layer to print debugging information
- *
- **/
-struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
-{
- struct e1000_adapter *adapter = hw->back;
- return adapter->netdev;
-}
-
-/**
- * e1000_init_module - Driver Registration Routine
- *
- * e1000_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-
-static int __init e1000_init_module(void)
-{
- int ret;
- pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
-
- pr_info("%s\n", e1000_copyright);
-
- ret = pci_register_driver(&e1000_driver);
- if (copybreak != COPYBREAK_DEFAULT) {
- if (copybreak == 0)
- pr_info("copybreak disabled\n");
- else
- pr_info("copybreak enabled for "
- "packets <= %u bytes\n", copybreak);
- }
- return ret;
-}
-
-module_init(e1000_init_module);
-
-/**
- * e1000_exit_module - Driver Exit Cleanup Routine
- *
- * e1000_exit_module is called just before the driver is removed
- * from memory.
- **/
-
-static void __exit e1000_exit_module(void)
-{
- pci_unregister_driver(&e1000_driver);
-}
-
-module_exit(e1000_exit_module);
-
-static int e1000_request_irq(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- irq_handler_t handler = e1000_intr;
- int irq_flags = IRQF_SHARED;
- int err;
-
- err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
- netdev);
- if (err) {
- e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
- }
-
- return err;
-}
-
-static void e1000_free_irq(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
-
- free_irq(adapter->pdev->irq, netdev);
-}
-
-/**
- * e1000_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-
-static void e1000_irq_disable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- ew32(IMC, ~0);
- E1000_WRITE_FLUSH();
- synchronize_irq(adapter->pdev->irq);
-}
-
-/**
- * e1000_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-
-static void e1000_irq_enable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- ew32(IMS, IMS_ENABLE_MASK);
- E1000_WRITE_FLUSH();
-}
-
-static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u16 vid = hw->mng_cookie.vlan_id;
- u16 old_vid = adapter->mng_vlan_id;
-
- if (!e1000_vlan_used(adapter))
- return;
-
- if (!test_bit(vid, adapter->active_vlans)) {
- if (hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
- e1000_vlan_rx_add_vid(netdev, vid);
- adapter->mng_vlan_id = vid;
- } else {
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- }
- if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
- (vid != old_vid) &&
- !test_bit(old_vid, adapter->active_vlans))
- e1000_vlan_rx_kill_vid(netdev, old_vid);
- } else {
- adapter->mng_vlan_id = vid;
- }
-}
-
-static void e1000_init_manageability(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = er32(MANC);
-
- /* disable hardware interception of ARP */
- manc &= ~(E1000_MANC_ARP_EN);
-
- ew32(MANC, manc);
- }
-}
-
-static void e1000_release_manageability(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->en_mng_pt) {
- u32 manc = er32(MANC);
-
- /* re-enable hardware interception of ARP */
- manc |= E1000_MANC_ARP_EN;
-
- ew32(MANC, manc);
- }
-}
-
-/**
- * e1000_configure - configure the hardware for RX and TX
- * @adapter = private board structure
- **/
-static void e1000_configure(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int i;
-
- e1000_set_rx_mode(netdev);
-
- e1000_restore_vlan(adapter);
- e1000_init_manageability(adapter);
-
- e1000_configure_tx(adapter);
- e1000_setup_rctl(adapter);
- e1000_configure_rx(adapter);
- /* call E1000_DESC_UNUSED which always leaves
- * at least 1 descriptor unused to make sure
- * next_to_use != next_to_clean */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct e1000_rx_ring *ring = &adapter->rx_ring[i];
- adapter->alloc_rx_buf(adapter, ring,
- E1000_DESC_UNUSED(ring));
- }
-}
-
-int e1000_up(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* hardware has been reset, we need to reload some things */
- e1000_configure(adapter);
-
- clear_bit(__E1000_DOWN, &adapter->flags);
-
- napi_enable(&adapter->napi);
-
- e1000_irq_enable(adapter);
-
- netif_wake_queue(adapter->netdev);
-
- /* fire a link change interrupt to start the watchdog */
- ew32(ICS, E1000_ICS_LSC);
- return 0;
-}
-
-/**
- * e1000_power_up_phy - restore link in case the phy was powered down
- * @adapter: address of board private structure
- *
- * The phy may be powered down to save power and turn off link when the
- * driver is unloaded and wake on lan is not enabled (among others)
- * *** this routine MUST be followed by a call to e1000_reset ***
- *
- **/
-
-void e1000_power_up_phy(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 mii_reg = 0;
-
- /* Just clear the power down bit to wake the phy back up */
- if (hw->media_type == e1000_media_type_copper) {
- /* according to the manual, the phy will retain its
- * settings across a power-down/up cycle */
- e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
- mii_reg &= ~MII_CR_POWER_DOWN;
- e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
- }
-}
-
-static void e1000_power_down_phy(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* Power down the PHY so no link is implied when interface is down *
- * The PHY cannot be powered down if any of the following is true *
- * (a) WoL is enabled
- * (b) AMT is active
- * (c) SoL/IDER session is active */
- if (!adapter->wol && hw->mac_type >= e1000_82540 &&
- hw->media_type == e1000_media_type_copper) {
- u16 mii_reg = 0;
-
- switch (hw->mac_type) {
- case e1000_82540:
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_ce4100:
- case e1000_82546_rev_3:
- case e1000_82541:
- case e1000_82541_rev_2:
- case e1000_82547:
- case e1000_82547_rev_2:
- if (er32(MANC) & E1000_MANC_SMBUS_EN)
- goto out;
- break;
- default:
- goto out;
- }
- e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
- mii_reg |= MII_CR_POWER_DOWN;
- e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
- mdelay(1);
- }
-out:
- return;
-}
-
-void e1000_down(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 rctl, tctl;
-
-
- /* disable receives in the hardware */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- /* flush and sleep below */
-
- netif_tx_disable(netdev);
-
- /* disable transmits in the hardware */
- tctl = er32(TCTL);
- tctl &= ~E1000_TCTL_EN;
- ew32(TCTL, tctl);
- /* flush both disables and wait for them to finish */
- E1000_WRITE_FLUSH();
- msleep(10);
-
- napi_disable(&adapter->napi);
-
- e1000_irq_disable(adapter);
-
- /*
- * Setting DOWN must be after irq_disable to prevent
- * a screaming interrupt. Setting DOWN also prevents
- * timers and tasks from rescheduling.
- */
- set_bit(__E1000_DOWN, &adapter->flags);
-
- del_timer_sync(&adapter->tx_fifo_stall_timer);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netif_carrier_off(netdev);
-
- e1000_reset(adapter);
- e1000_clean_all_tx_rings(adapter);
- e1000_clean_all_rx_rings(adapter);
-}
-
-static void e1000_reinit_safe(struct e1000_adapter *adapter)
-{
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
- rtnl_lock();
- e1000_down(adapter);
- e1000_up(adapter);
- rtnl_unlock();
- clear_bit(__E1000_RESETTING, &adapter->flags);
-}
-
-void e1000_reinit_locked(struct e1000_adapter *adapter)
-{
- /* if rtnl_lock is not held the call path is bogus */
- ASSERT_RTNL();
- WARN_ON(in_interrupt());
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
- e1000_down(adapter);
- e1000_up(adapter);
- clear_bit(__E1000_RESETTING, &adapter->flags);
-}
-
-void e1000_reset(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 pba = 0, tx_space, min_tx_space, min_rx_space;
- bool legacy_pba_adjust = false;
- u16 hwm;
-
- /* Repartition Pba for greater than 9k mtu
- * To take effect CTRL.RST is required.
- */
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- case e1000_82544:
- case e1000_82540:
- case e1000_82541:
- case e1000_82541_rev_2:
- legacy_pba_adjust = true;
- pba = E1000_PBA_48K;
- break;
- case e1000_82545:
- case e1000_82545_rev_3:
- case e1000_82546:
- case e1000_ce4100:
- case e1000_82546_rev_3:
- pba = E1000_PBA_48K;
- break;
- case e1000_82547:
- case e1000_82547_rev_2:
- legacy_pba_adjust = true;
- pba = E1000_PBA_30K;
- break;
- case e1000_undefined:
- case e1000_num_macs:
- break;
- }
-
- if (legacy_pba_adjust) {
- if (hw->max_frame_size > E1000_RXBUFFER_8192)
- pba -= 8; /* allocate more FIFO for Tx */
-
- if (hw->mac_type == e1000_82547) {
- adapter->tx_fifo_head = 0;
- adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
- adapter->tx_fifo_size =
- (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
- atomic_set(&adapter->tx_fifo_stall, 0);
- }
- } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
- /* adjust PBA for jumbo frames */
- ew32(PBA, pba);
-
- /* To maintain wire speed transmits, the Tx FIFO should be
- * large enough to accommodate two full transmit packets,
- * rounded up to the next 1KB and expressed in KB. Likewise,
- * the Rx FIFO should be large enough to accommodate at least
- * one full receive packet and is similarly rounded up and
- * expressed in KB. */
- pba = er32(PBA);
- /* upper 16 bits has Tx packet buffer allocation size in KB */
- tx_space = pba >> 16;
- /* lower 16 bits has Rx packet buffer allocation size in KB */
- pba &= 0xffff;
- /*
- * the tx fifo also stores 16 bytes of information about the tx
- * but don't include ethernet FCS because hardware appends it
- */
- min_tx_space = (hw->max_frame_size +
- sizeof(struct e1000_tx_desc) -
- ETH_FCS_LEN) * 2;
- min_tx_space = ALIGN(min_tx_space, 1024);
- min_tx_space >>= 10;
- /* software strips receive CRC, so leave room for it */
- min_rx_space = hw->max_frame_size;
- min_rx_space = ALIGN(min_rx_space, 1024);
- min_rx_space >>= 10;
-
- /* If current Tx allocation is less than the min Tx FIFO size,
- * and the min Tx FIFO size is less than the current Rx FIFO
- * allocation, take space away from current Rx allocation */
- if (tx_space < min_tx_space &&
- ((min_tx_space - tx_space) < pba)) {
- pba = pba - (min_tx_space - tx_space);
-
- /* PCI/PCIx hardware has PBA alignment constraints */
- switch (hw->mac_type) {
- case e1000_82545 ... e1000_82546_rev_3:
- pba &= ~(E1000_PBA_8K - 1);
- break;
- default:
- break;
- }
-
- /* if short on rx space, rx wins and must trump tx
- * adjustment or use Early Receive if available */
- if (pba < min_rx_space)
- pba = min_rx_space;
- }
- }
-
- ew32(PBA, pba);
-
- /*
- * flow control settings:
- * The high water mark must be low enough to fit one full frame
- * (or the size used for early receive) above it in the Rx FIFO.
- * Set it to the lower of:
- * - 90% of the Rx FIFO size, and
- * - the full Rx FIFO size minus the early receive size (for parts
- * with ERT support assuming ERT set to E1000_ERT_2048), or
- * - the full Rx FIFO size minus one full frame
- */
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - hw->max_frame_size));
-
- hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
- hw->fc_low_water = hw->fc_high_water - 8;
- hw->fc_pause_time = E1000_FC_PAUSE_TIME;
- hw->fc_send_xon = 1;
- hw->fc = hw->original_fc;
-
- /* Allow time for pending master requests to run */
- e1000_reset_hw(hw);
- if (hw->mac_type >= e1000_82544)
- ew32(WUC, 0);
-
- if (e1000_init_hw(hw))
- e_dev_err("Hardware Error\n");
- e1000_update_mng_vlan(adapter);
-
- /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
- if (hw->mac_type >= e1000_82544 &&
- hw->autoneg == 1 &&
- hw->autoneg_advertised == ADVERTISE_1000_FULL) {
- u32 ctrl = er32(CTRL);
- /* clear phy power management bit if we are in gig only mode,
- * which if enabled will attempt negotiation to 100Mb, which
- * can cause a loss of link at power off or driver unload */
- ctrl &= ~E1000_CTRL_SWDPIN3;
- ew32(CTRL, ctrl);
- }
-
- /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
- ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
-
- e1000_reset_adaptive(hw);
- e1000_phy_get_info(hw, &adapter->phy_info);
-
- e1000_release_manageability(adapter);
-}
-
-/**
- * Dump the eeprom for users having checksum issues
- **/
-static void e1000_dump_eeprom(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ethtool_eeprom eeprom;
- const struct ethtool_ops *ops = netdev->ethtool_ops;
- u8 *data;
- int i;
- u16 csum_old, csum_new = 0;
-
- eeprom.len = ops->get_eeprom_len(netdev);
- eeprom.offset = 0;
-
- data = kmalloc(eeprom.len, GFP_KERNEL);
- if (!data) {
- pr_err("Unable to allocate memory to dump EEPROM data\n");
- return;
- }
-
- ops->get_eeprom(netdev, &eeprom, data);
-
- csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
- (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
- for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
- csum_new += data[i] + (data[i + 1] << 8);
- csum_new = EEPROM_SUM - csum_new;
-
- pr_err("/*********************/\n");
- pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
- pr_err("Calculated : 0x%04x\n", csum_new);
-
- pr_err("Offset Values\n");
- pr_err("======== ======\n");
- print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
-
- pr_err("Include this output when contacting your support provider.\n");
- pr_err("This is not a software error! Something bad happened to\n");
- pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
- pr_err("result in further problems, possibly loss of data,\n");
- pr_err("corruption or system hangs!\n");
- pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
- pr_err("which is invalid and requires you to set the proper MAC\n");
- pr_err("address manually before continuing to enable this network\n");
- pr_err("device. Please inspect the EEPROM dump and report the\n");
- pr_err("issue to your hardware vendor or Intel Customer Support.\n");
- pr_err("/*********************/\n");
-
- kfree(data);
-}
-
-/**
- * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
- * @pdev: PCI device information struct
- *
- * Return true if an adapter needs ioport resources
- **/
-static int e1000_is_need_ioport(struct pci_dev *pdev)
-{
- switch (pdev->device) {
- case E1000_DEV_ID_82540EM:
- case E1000_DEV_ID_82540EM_LOM:
- case E1000_DEV_ID_82540EP:
- case E1000_DEV_ID_82540EP_LOM:
- case E1000_DEV_ID_82540EP_LP:
- case E1000_DEV_ID_82541EI:
- case E1000_DEV_ID_82541EI_MOBILE:
- case E1000_DEV_ID_82541ER:
- case E1000_DEV_ID_82541ER_LOM:
- case E1000_DEV_ID_82541GI:
- case E1000_DEV_ID_82541GI_LF:
- case E1000_DEV_ID_82541GI_MOBILE:
- case E1000_DEV_ID_82544EI_COPPER:
- case E1000_DEV_ID_82544EI_FIBER:
- case E1000_DEV_ID_82544GC_COPPER:
- case E1000_DEV_ID_82544GC_LOM:
- case E1000_DEV_ID_82545EM_COPPER:
- case E1000_DEV_ID_82545EM_FIBER:
- case E1000_DEV_ID_82546EB_COPPER:
- case E1000_DEV_ID_82546EB_FIBER:
- case E1000_DEV_ID_82546EB_QUAD_COPPER:
- return true;
- default:
- return false;
- }
-}
-
-static u32 e1000_fix_features(struct net_device *netdev, u32 features)
-{
- /*
- * Since there is no support for separate rx/tx vlan accel
- * enable/disable make sure tx flag is always in same state as rx.
- */
- if (features & NETIF_F_HW_VLAN_RX)
- features |= NETIF_F_HW_VLAN_TX;
- else
- features &= ~NETIF_F_HW_VLAN_TX;
-
- return features;
-}
-
-static int e1000_set_features(struct net_device *netdev, u32 features)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- u32 changed = features ^ netdev->features;
-
- if (changed & NETIF_F_HW_VLAN_RX)
- e1000_vlan_mode(netdev, features);
-
- if (!(changed & NETIF_F_RXCSUM))
- return 0;
-
- adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
-
- if (netif_running(netdev))
- e1000_reinit_locked(adapter);
- else
- e1000_reset(adapter);
-
- return 0;
-}
-
-static const struct net_device_ops e1000_netdev_ops = {
- .ndo_open = e1000_open,
- .ndo_stop = e1000_close,
- .ndo_start_xmit = e1000_xmit_frame,
- .ndo_get_stats = e1000_get_stats,
- .ndo_set_rx_mode = e1000_set_rx_mode,
- .ndo_set_mac_address = e1000_set_mac,
- .ndo_tx_timeout = e1000_tx_timeout,
- .ndo_change_mtu = e1000_change_mtu,
- .ndo_do_ioctl = e1000_ioctl,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = e1000_netpoll,
-#endif
- .ndo_fix_features = e1000_fix_features,
- .ndo_set_features = e1000_set_features,
-};
-
-/**
- * e1000_init_hw_struct - initialize members of hw struct
- * @adapter: board private struct
- * @hw: structure used by e1000_hw.c
- *
- * Factors out initialization of the e1000_hw struct to its own function
- * that can be called very early at init (just after struct allocation).
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- * Returns negative error codes if MAC type setup fails.
- */
-static int e1000_init_hw_struct(struct e1000_adapter *adapter,
- struct e1000_hw *hw)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_id = pdev->subsystem_device;
- hw->revision_id = pdev->revision;
-
- pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
-
- hw->max_frame_size = adapter->netdev->mtu +
- ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
- hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
-
- /* identify the MAC */
- if (e1000_set_mac_type(hw)) {
- e_err(probe, "Unknown MAC Type\n");
- return -EIO;
- }
-
- switch (hw->mac_type) {
- default:
- break;
- case e1000_82541:
- case e1000_82547:
- case e1000_82541_rev_2:
- case e1000_82547_rev_2:
- hw->phy_init_script = 1;
- break;
- }
-
- e1000_set_media_type(hw);
- e1000_get_bus_info(hw);
-
- hw->wait_autoneg_complete = false;
- hw->tbi_compatibility_en = true;
- hw->adaptive_ifs = true;
-
- /* Copper options */
-
- if (hw->media_type == e1000_media_type_copper) {
- hw->mdix = AUTO_ALL_MODES;
- hw->disable_polarity_correction = false;
- hw->master_slave = E1000_MASTER_SLAVE;
- }
-
- return 0;
-}
-
-/**
- * e1000_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in e1000_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * e1000_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit e1000_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct e1000_adapter *adapter;
- struct e1000_hw *hw;
-
- static int cards_found = 0;
- static int global_quad_port_a = 0; /* global ksp3 port a indication */
- int i, err, pci_using_dac;
- u16 eeprom_data = 0;
- u16 tmp = 0;
- u16 eeprom_apme_mask = E1000_EEPROM_APME;
- int bars, need_ioport;
-
- /* do not allocate ioport bars when not needed */
- need_ioport = e1000_is_need_ioport(pdev);
- if (need_ioport) {
- bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
- err = pci_enable_device(pdev);
- } else {
- bars = pci_select_bars(pdev, IORESOURCE_MEM);
- err = pci_enable_device_mem(pdev);
- }
- if (err)
- return err;
-
- err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
- if (err)
- goto err_pci_reg;
-
- pci_set_master(pdev);
- err = pci_save_state(pdev);
- if (err)
- goto err_alloc_etherdev;
-
- err = -ENOMEM;
- netdev = alloc_etherdev(sizeof(struct e1000_adapter));
- if (!netdev)
- goto err_alloc_etherdev;
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- adapter->msg_enable = (1 << debug) - 1;
- adapter->bars = bars;
- adapter->need_ioport = need_ioport;
-
- hw = &adapter->hw;
- hw->back = adapter;
-
- err = -EIO;
- hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
- if (!hw->hw_addr)
- goto err_ioremap;
-
- if (adapter->need_ioport) {
- for (i = BAR_1; i <= BAR_5; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
- hw->io_base = pci_resource_start(pdev, i);
- break;
- }
- }
- }
-
- /* make ready for any if (hw->...) below */
- err = e1000_init_hw_struct(adapter, hw);
- if (err)
- goto err_sw_init;
-
- /*
- * there is a workaround being applied below that limits
- * 64-bit DMA addresses to 64-bit hardware. There are some
- * 32-bit adapters that Tx hang when given 64-bit DMA addresses
- */
- pci_using_dac = 0;
- if ((hw->bus_type == e1000_bus_type_pcix) &&
- !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- /*
- * according to DMA-API-HOWTO, coherent calls will always
- * succeed if the set call did
- */
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- pr_err("No usable DMA config, aborting\n");
- goto err_dma;
- }
- dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- }
-
- netdev->netdev_ops = &e1000_netdev_ops;
- e1000_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
-
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- adapter->bd_number = cards_found;
-
- /* setup the private structure */
-
- err = e1000_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- err = -EIO;
- if (hw->mac_type == e1000_ce4100) {
- ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1);
- ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy,
- pci_resource_len(pdev, BAR_1));
-
- if (!ce4100_gbe_mdio_base_virt)
- goto err_mdio_ioremap;
- }
-
- if (hw->mac_type >= e1000_82543) {
- netdev->hw_features = NETIF_F_SG |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_RX;
- netdev->features = NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_FILTER;
- }
-
- if ((hw->mac_type >= e1000_82544) &&
- (hw->mac_type != e1000_82547))
- netdev->hw_features |= NETIF_F_TSO;
-
- netdev->features |= netdev->hw_features;
- netdev->hw_features |= NETIF_F_RXCSUM;
-
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_HW_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
-
- /* initialize eeprom parameters */
- if (e1000_init_eeprom_params(hw)) {
- e_err(probe, "EEPROM initialization failed\n");
- goto err_eeprom;
- }
-
- /* before reading the EEPROM, reset the controller to
- * put the device in a known good starting state */
-
- e1000_reset_hw(hw);
-
- /* make sure the EEPROM is good */
- if (e1000_validate_eeprom_checksum(hw) < 0) {
- e_err(probe, "The EEPROM Checksum Is Not Valid\n");
- e1000_dump_eeprom(adapter);
- /*
- * set MAC address to all zeroes to invalidate and temporary
- * disable this device for the user. This blocks regular
- * traffic while still permitting ethtool ioctls from reaching
- * the hardware as well as allowing the user to run the
- * interface after manually setting a hw addr using
- * `ip set address`
- */
- memset(hw->mac_addr, 0, netdev->addr_len);
- } else {
- /* copy the MAC address out of the EEPROM */
- if (e1000_read_mac_addr(hw))
- e_err(probe, "EEPROM Read Error\n");
- }
- /* don't block initalization here due to bad MAC address */
- memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
- memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr))
- e_err(probe, "Invalid MAC Address\n");
-
- init_timer(&adapter->tx_fifo_stall_timer);
- adapter->tx_fifo_stall_timer.function = e1000_82547_tx_fifo_stall;
- adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = e1000_watchdog;
- adapter->watchdog_timer.data = (unsigned long) adapter;
-
- init_timer(&adapter->phy_info_timer);
- adapter->phy_info_timer.function = e1000_update_phy_info;
- adapter->phy_info_timer.data = (unsigned long)adapter;
-
- INIT_WORK(&adapter->fifo_stall_task, e1000_82547_tx_fifo_stall_task);
- INIT_WORK(&adapter->reset_task, e1000_reset_task);
- INIT_WORK(&adapter->phy_info_task, e1000_update_phy_info_task);
-
- e1000_check_options(adapter);
-
- /* Initial Wake on LAN setting
- * If APM wake is enabled in the EEPROM,
- * enable the ACPI Magic Packet filter
- */
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- case e1000_82543:
- break;
- case e1000_82544:
- e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
- eeprom_apme_mask = E1000_EEPROM_82544_APM;
- break;
- case e1000_82546:
- case e1000_82546_rev_3:
- if (er32(STATUS) & E1000_STATUS_FUNC_1){
- e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
- break;
- }
- /* Fall Through */
- default:
- e1000_read_eeprom(hw,
- EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
- break;
- }
- if (eeprom_data & eeprom_apme_mask)
- adapter->eeprom_wol |= E1000_WUFC_MAG;
-
- /* now that we have the eeprom settings, apply the special cases
- * where the eeprom may be wrong or the board simply won't support
- * wake on lan on a particular port */
- switch (pdev->device) {
- case E1000_DEV_ID_82546GB_PCIE:
- adapter->eeprom_wol = 0;
- break;
- case E1000_DEV_ID_82546EB_FIBER:
- case E1000_DEV_ID_82546GB_FIBER:
- /* Wake events only supported on port A for dual fiber
- * regardless of eeprom setting */
- if (er32(STATUS) & E1000_STATUS_FUNC_1)
- adapter->eeprom_wol = 0;
- break;
- case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
- /* if quad port adapter, disable WoL on all but port A */
- if (global_quad_port_a != 0)
- adapter->eeprom_wol = 0;
- else
- adapter->quad_port_a = 1;
- /* Reset for multiple quad port adapters */
- if (++global_quad_port_a == 4)
- global_quad_port_a = 0;
- break;
- }
-
- /* initialize the wol settings based on the eeprom settings */
- adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- /* Auto detect PHY address */
- if (hw->mac_type == e1000_ce4100) {
- for (i = 0; i < 32; i++) {
- hw->phy_addr = i;
- e1000_read_phy_reg(hw, PHY_ID2, &tmp);
- if (tmp == 0 || tmp == 0xFF) {
- if (i == 31)
- goto err_eeprom;
- continue;
- } else
- break;
- }
- }
-
- /* reset the hardware with the new settings */
- e1000_reset(adapter);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- e1000_vlan_mode(netdev, netdev->features);
-
- /* print bus type/speed/width info */
- e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n",
- ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
- ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
- (hw->bus_speed == e1000_bus_speed_120) ? 120 :
- (hw->bus_speed == e1000_bus_speed_100) ? 100 :
- (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
- ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
- netdev->dev_addr);
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
- e_info(probe, "Intel(R) PRO/1000 Network Connection\n");
-
- cards_found++;
- return 0;
-
-err_register:
-err_eeprom:
- e1000_phy_hw_reset(hw);
-
- if (hw->flash_address)
- iounmap(hw->flash_address);
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-err_dma:
-err_sw_init:
-err_mdio_ioremap:
- iounmap(ce4100_gbe_mdio_base_virt);
- iounmap(hw->hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_selected_regions(pdev, bars);
-err_pci_reg:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * e1000_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * e1000_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-
-static void __devexit e1000_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- set_bit(__E1000_DOWN, &adapter->flags);
- del_timer_sync(&adapter->tx_fifo_stall_timer);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- cancel_work_sync(&adapter->reset_task);
-
- e1000_release_manageability(adapter);
-
- unregister_netdev(netdev);
-
- e1000_phy_hw_reset(hw);
-
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-
- iounmap(hw->hw_addr);
- if (hw->flash_address)
- iounmap(hw->flash_address);
- pci_release_selected_regions(pdev, adapter->bars);
-
- free_netdev(netdev);
-
- pci_disable_device(pdev);
-}
-
-/**
- * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
- * @adapter: board private structure to initialize
- *
- * e1000_sw_init initializes the Adapter private data structure.
- * e1000_init_hw_struct MUST be called before this function
- **/
-
-static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
-{
- adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-
- adapter->num_tx_queues = 1;
- adapter->num_rx_queues = 1;
-
- if (e1000_alloc_queues(adapter)) {
- e_err(probe, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
- /* Explicitly disable IRQ since the NIC can be in any state. */
- e1000_irq_disable(adapter);
-
- spin_lock_init(&adapter->stats_lock);
-
- set_bit(__E1000_DOWN, &adapter->flags);
-
- return 0;
-}
-
-/**
- * e1000_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- *
- * We allocate one ring per queue at run-time since we don't know the
- * number of queues at compile-time.
- **/
-
-static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
-{
- adapter->tx_ring = kcalloc(adapter->num_tx_queues,
- sizeof(struct e1000_tx_ring), GFP_KERNEL);
- if (!adapter->tx_ring)
- return -ENOMEM;
-
- adapter->rx_ring = kcalloc(adapter->num_rx_queues,
- sizeof(struct e1000_rx_ring), GFP_KERNEL);
- if (!adapter->rx_ring) {
- kfree(adapter->tx_ring);
- return -ENOMEM;
- }
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-
-static int e1000_open(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int err;
-
- /* disallow open during test */
- if (test_bit(__E1000_TESTING, &adapter->flags))
- return -EBUSY;
-
- netif_carrier_off(netdev);
-
- /* allocate transmit descriptors */
- err = e1000_setup_all_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = e1000_setup_all_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- e1000_power_up_phy(adapter);
-
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if ((hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
- e1000_update_mng_vlan(adapter);
- }
-
- /* before we allocate an interrupt, we must be ready to handle it.
- * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
- * as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so. */
- e1000_configure(adapter);
-
- err = e1000_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- /* From here on the code is the same as e1000_up() */
- clear_bit(__E1000_DOWN, &adapter->flags);
-
- napi_enable(&adapter->napi);
-
- e1000_irq_enable(adapter);
-
- netif_start_queue(netdev);
-
- /* fire a link status change interrupt to start the watchdog */
- ew32(ICS, E1000_ICS_LSC);
-
- return E1000_SUCCESS;
-
-err_req_irq:
- e1000_power_down_phy(adapter);
- e1000_free_all_rx_resources(adapter);
-err_setup_rx:
- e1000_free_all_tx_resources(adapter);
-err_setup_tx:
- e1000_reset(adapter);
-
- return err;
-}
-
-/**
- * e1000_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-
-static int e1000_close(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
- e1000_down(adapter);
- e1000_power_down_phy(adapter);
- e1000_free_irq(adapter);
-
- e1000_free_all_tx_resources(adapter);
- e1000_free_all_rx_resources(adapter);
-
- /* kill manageability vlan ID if supported, but not if a vlan with
- * the same ID is registered on the host OS (let 8021q kill it) */
- if ((hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- }
-
- return 0;
-}
-
-/**
- * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
- * @adapter: address of board private structure
- * @start: address of beginning of memory
- * @len: length of memory
- **/
-static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
- unsigned long len)
-{
- struct e1000_hw *hw = &adapter->hw;
- unsigned long begin = (unsigned long)start;
- unsigned long end = begin + len;
-
- /* First rev 82545 and 82546 need to not allow any memory
- * write location to cross 64k boundary due to errata 23 */
- if (hw->mac_type == e1000_82545 ||
- hw->mac_type == e1000_ce4100 ||
- hw->mac_type == e1000_82546) {
- return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
- }
-
- return true;
-}
-
-/**
- * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- * @txdr: tx descriptor ring (for a specific queue) to setup
- *
- * Return 0 on success, negative on failure
- **/
-
-static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *txdr)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct e1000_buffer) * txdr->count;
- txdr->buffer_info = vzalloc(size);
- if (!txdr->buffer_info) {
- e_err(probe, "Unable to allocate memory for the Tx descriptor "
- "ring\n");
- return -ENOMEM;
- }
-
- /* round up to nearest 4K */
-
- txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
- txdr->size = ALIGN(txdr->size, 4096);
-
- txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
- GFP_KERNEL);
- if (!txdr->desc) {
-setup_tx_desc_die:
- vfree(txdr->buffer_info);
- e_err(probe, "Unable to allocate memory for the Tx descriptor "
- "ring\n");
- return -ENOMEM;
- }
-
- /* Fix for errata 23, can't cross 64kB boundary */
- if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
- void *olddesc = txdr->desc;
- dma_addr_t olddma = txdr->dma;
- e_err(tx_err, "txdr align check failed: %u bytes at %p\n",
- txdr->size, txdr->desc);
- /* Try again, without freeing the previous */
- txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size,
- &txdr->dma, GFP_KERNEL);
- /* Failed allocation, critical failure */
- if (!txdr->desc) {
- dma_free_coherent(&pdev->dev, txdr->size, olddesc,
- olddma);
- goto setup_tx_desc_die;
- }
-
- if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
- /* give up */
- dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
- txdr->dma);
- dma_free_coherent(&pdev->dev, txdr->size, olddesc,
- olddma);
- e_err(probe, "Unable to allocate aligned memory "
- "for the transmit descriptor ring\n");
- vfree(txdr->buffer_info);
- return -ENOMEM;
- } else {
- /* Free old allocation, new allocation was successful */
- dma_free_coherent(&pdev->dev, txdr->size, olddesc,
- olddma);
- }
- }
- memset(txdr->desc, 0, txdr->size);
-
- txdr->next_to_use = 0;
- txdr->next_to_clean = 0;
-
- return 0;
-}
-
-/**
- * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
- * (Descriptors) for all queues
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-
-int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
- if (err) {
- e_err(probe, "Allocation for Tx Queue %u failed\n", i);
- for (i-- ; i >= 0; i--)
- e1000_free_tx_resources(adapter,
- &adapter->tx_ring[i]);
- break;
- }
- }
-
- return err;
-}
-
-/**
- * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-
-static void e1000_configure_tx(struct e1000_adapter *adapter)
-{
- u64 tdba;
- struct e1000_hw *hw = &adapter->hw;
- u32 tdlen, tctl, tipg;
- u32 ipgr1, ipgr2;
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
-
- switch (adapter->num_tx_queues) {
- case 1:
- default:
- tdba = adapter->tx_ring[0].dma;
- tdlen = adapter->tx_ring[0].count *
- sizeof(struct e1000_tx_desc);
- ew32(TDLEN, tdlen);
- ew32(TDBAH, (tdba >> 32));
- ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
- ew32(TDT, 0);
- ew32(TDH, 0);
- adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
- adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
- break;
- }
-
- /* Set the default values for the Tx Inter Packet Gap timer */
- if ((hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes))
- tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
- else
- tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
-
- switch (hw->mac_type) {
- case e1000_82542_rev2_0:
- case e1000_82542_rev2_1:
- tipg = DEFAULT_82542_TIPG_IPGT;
- ipgr1 = DEFAULT_82542_TIPG_IPGR1;
- ipgr2 = DEFAULT_82542_TIPG_IPGR2;
- break;
- default:
- ipgr1 = DEFAULT_82543_TIPG_IPGR1;
- ipgr2 = DEFAULT_82543_TIPG_IPGR2;
- break;
- }
- tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
- tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
- ew32(TIPG, tipg);
-
- /* Set the Tx Interrupt Delay register */
-
- ew32(TIDV, adapter->tx_int_delay);
- if (hw->mac_type >= e1000_82540)
- ew32(TADV, adapter->tx_abs_int_delay);
-
- /* Program the Transmit Control Register */
-
- tctl = er32(TCTL);
- tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
- e1000_config_collision_dist(hw);
-
- /* Setup Transmit Descriptor Settings for eop descriptor */
- adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
-
- /* only set IDE if we are delaying interrupts using the timers */
- if (adapter->tx_int_delay)
- adapter->txd_cmd |= E1000_TXD_CMD_IDE;
-
- if (hw->mac_type < e1000_82543)
- adapter->txd_cmd |= E1000_TXD_CMD_RPS;
- else
- adapter->txd_cmd |= E1000_TXD_CMD_RS;
-
- /* Cache if we're 82544 running in PCI-X because we'll
- * need this to apply a workaround later in the send path. */
- if (hw->mac_type == e1000_82544 &&
- hw->bus_type == e1000_bus_type_pcix)
- adapter->pcix_82544 = 1;
-
- ew32(TCTL, tctl);
-
-}
-
-/**
- * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- * @rxdr: rx descriptor ring (for a specific queue) to setup
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rxdr)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size, desc_len;
-
- size = sizeof(struct e1000_buffer) * rxdr->count;
- rxdr->buffer_info = vzalloc(size);
- if (!rxdr->buffer_info) {
- e_err(probe, "Unable to allocate memory for the Rx descriptor "
- "ring\n");
- return -ENOMEM;
- }
-
- desc_len = sizeof(struct e1000_rx_desc);
-
- /* Round up to nearest 4K */
-
- rxdr->size = rxdr->count * desc_len;
- rxdr->size = ALIGN(rxdr->size, 4096);
-
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
- GFP_KERNEL);
-
- if (!rxdr->desc) {
- e_err(probe, "Unable to allocate memory for the Rx descriptor "
- "ring\n");
-setup_rx_desc_die:
- vfree(rxdr->buffer_info);
- return -ENOMEM;
- }
-
- /* Fix for errata 23, can't cross 64kB boundary */
- if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
- void *olddesc = rxdr->desc;
- dma_addr_t olddma = rxdr->dma;
- e_err(rx_err, "rxdr align check failed: %u bytes at %p\n",
- rxdr->size, rxdr->desc);
- /* Try again, without freeing the previous */
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size,
- &rxdr->dma, GFP_KERNEL);
- /* Failed allocation, critical failure */
- if (!rxdr->desc) {
- dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
- olddma);
- e_err(probe, "Unable to allocate memory for the Rx "
- "descriptor ring\n");
- goto setup_rx_desc_die;
- }
-
- if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
- /* give up */
- dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
- rxdr->dma);
- dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
- olddma);
- e_err(probe, "Unable to allocate aligned memory for "
- "the Rx descriptor ring\n");
- goto setup_rx_desc_die;
- } else {
- /* Free old allocation, new allocation was successful */
- dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
- olddma);
- }
- }
- memset(rxdr->desc, 0, rxdr->size);
-
- rxdr->next_to_clean = 0;
- rxdr->next_to_use = 0;
- rxdr->rx_skb_top = NULL;
-
- return 0;
-}
-
-/**
- * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
- * (Descriptors) for all queues
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-
-int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
- if (err) {
- e_err(probe, "Allocation for Rx Queue %u failed\n", i);
- for (i-- ; i >= 0; i--)
- e1000_free_rx_resources(adapter,
- &adapter->rx_ring[i]);
- break;
- }
- }
-
- return err;
-}
-
-/**
- * e1000_setup_rctl - configure the receive control registers
- * @adapter: Board private structure
- **/
-static void e1000_setup_rctl(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- rctl = er32(RCTL);
-
- rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
-
- rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
-
- if (hw->tbi_compatibility_on == 1)
- rctl |= E1000_RCTL_SBP;
- else
- rctl &= ~E1000_RCTL_SBP;
-
- if (adapter->netdev->mtu <= ETH_DATA_LEN)
- rctl &= ~E1000_RCTL_LPE;
- else
- rctl |= E1000_RCTL_LPE;
-
- /* Setup buffer sizes */
- rctl &= ~E1000_RCTL_SZ_4096;
- rctl |= E1000_RCTL_BSEX;
- switch (adapter->rx_buffer_len) {
- case E1000_RXBUFFER_2048:
- default:
- rctl |= E1000_RCTL_SZ_2048;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case E1000_RXBUFFER_4096:
- rctl |= E1000_RCTL_SZ_4096;
- break;
- case E1000_RXBUFFER_8192:
- rctl |= E1000_RCTL_SZ_8192;
- break;
- case E1000_RXBUFFER_16384:
- rctl |= E1000_RCTL_SZ_16384;
- break;
- }
-
- ew32(RCTL, rctl);
-}
-
-/**
- * e1000_configure_rx - Configure 8254x Receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-
-static void e1000_configure_rx(struct e1000_adapter *adapter)
-{
- u64 rdba;
- struct e1000_hw *hw = &adapter->hw;
- u32 rdlen, rctl, rxcsum;
-
- if (adapter->netdev->mtu > ETH_DATA_LEN) {
- rdlen = adapter->rx_ring[0].count *
- sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_jumbo_rx_irq;
- adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
- } else {
- rdlen = adapter->rx_ring[0].count *
- sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_rx_irq;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
- }
-
- /* disable receives while setting up the descriptors */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
-
- /* set the Receive Delay Timer Register */
- ew32(RDTR, adapter->rx_int_delay);
-
- if (hw->mac_type >= e1000_82540) {
- ew32(RADV, adapter->rx_abs_int_delay);
- if (adapter->itr_setting != 0)
- ew32(ITR, 1000000000 / (adapter->itr * 256));
- }
-
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
- switch (adapter->num_rx_queues) {
- case 1:
- default:
- rdba = adapter->rx_ring[0].dma;
- ew32(RDLEN, rdlen);
- ew32(RDBAH, (rdba >> 32));
- ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
- ew32(RDT, 0);
- ew32(RDH, 0);
- adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
- adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
- break;
- }
-
- /* Enable 82543 Receive Checksum Offload for TCP and UDP */
- if (hw->mac_type >= e1000_82543) {
- rxcsum = er32(RXCSUM);
- if (adapter->rx_csum)
- rxcsum |= E1000_RXCSUM_TUOFL;
- else
- /* don't need to clear IPPCSE as it defaults to 0 */
- rxcsum &= ~E1000_RXCSUM_TUOFL;
- ew32(RXCSUM, rxcsum);
- }
-
- /* Enable Receives */
- ew32(RCTL, rctl);
-}
-
-/**
- * e1000_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
- * @tx_ring: Tx descriptor ring for a specific queue
- *
- * Free all transmit software resources
- **/
-
-static void e1000_free_tx_resources(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- e1000_clean_tx_ring(adapter, tx_ring);
-
- vfree(tx_ring->buffer_info);
- tx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
-
- tx_ring->desc = NULL;
-}
-
-/**
- * e1000_free_all_tx_resources - Free Tx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-
-void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
-}
-
-static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
- struct e1000_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length,
- DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
- /* buffer_info must be completely set up in the transmit path */
-}
-
-/**
- * e1000_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
- * @tx_ring: ring to be cleaned
- **/
-
-static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- e1000_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- size = sizeof(struct e1000_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
- tx_ring->last_tx_tso = 0;
-
- writel(0, hw->hw_addr + tx_ring->tdh);
- writel(0, hw->hw_addr + tx_ring->tdt);
-}
-
-/**
- * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
- * @adapter: board private structure
- **/
-
-static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
-}
-
-/**
- * e1000_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
- * @rx_ring: ring to clean the resources from
- *
- * Free all receive software resources
- **/
-
-static void e1000_free_rx_resources(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- e1000_clean_rx_ring(adapter, rx_ring);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * e1000_free_all_rx_resources - Free Rx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-
-void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
-}
-
-/**
- * e1000_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
- * @rx_ring: ring to free buffers from
- **/
-
-static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_buffer *buffer_info;
- struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma &&
- adapter->clean_rx == e1000_clean_rx_irq) {
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- } else if (buffer_info->dma &&
- adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
- dma_unmap_page(&pdev->dev, buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- }
-
- buffer_info->dma = 0;
- if (buffer_info->page) {
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- }
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- }
-
- /* there also may be some cached data from a chained receive */
- if (rx_ring->rx_skb_top) {
- dev_kfree_skb(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- }
-
- size = sizeof(struct e1000_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- writel(0, hw->hw_addr + rx_ring->rdh);
- writel(0, hw->hw_addr + rx_ring->rdt);
-}
-
-/**
- * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
- * @adapter: board private structure
- **/
-
-static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
-}
-
-/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
- * and memory write and invalidate disabled for certain operations
- */
-static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 rctl;
-
- e1000_pci_clear_mwi(hw);
-
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_RST;
- ew32(RCTL, rctl);
- E1000_WRITE_FLUSH();
- mdelay(5);
-
- if (netif_running(netdev))
- e1000_clean_all_rx_rings(adapter);
-}
-
-static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 rctl;
-
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_RST;
- ew32(RCTL, rctl);
- E1000_WRITE_FLUSH();
- mdelay(5);
-
- if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
- e1000_pci_set_mwi(hw);
-
- if (netif_running(netdev)) {
- /* No need to loop, because 82542 supports only 1 queue */
- struct e1000_rx_ring *ring = &adapter->rx_ring[0];
- e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
- }
-}
-
-/**
- * e1000_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int e1000_set_mac(struct net_device *netdev, void *p)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- /* 82542 2.0 needs to be in reset to write receive address registers */
-
- if (hw->mac_type == e1000_82542_rev2_0)
- e1000_enter_82542_rst(adapter);
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
-
- e1000_rar_set(hw, hw->mac_addr, 0);
-
- if (hw->mac_type == e1000_82542_rev2_0)
- e1000_leave_82542_rst(adapter);
-
- return 0;
-}
-
-/**
- * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_rx_mode entry point is called whenever the unicast or multicast
- * address lists or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper unicast, multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-
-static void e1000_set_rx_mode(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- bool use_uc = false;
- u32 rctl;
- u32 hash_value;
- int i, rar_entries = E1000_RAR_ENTRIES;
- int mta_reg_count = E1000_NUM_MTA_REGISTERS;
- u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
-
- if (!mcarray) {
- e_err(probe, "memory allocation failed\n");
- return;
- }
-
- /* Check for Promiscuous and All Multicast modes */
-
- rctl = er32(RCTL);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- rctl &= ~E1000_RCTL_VFE;
- } else {
- if (netdev->flags & IFF_ALLMULTI)
- rctl |= E1000_RCTL_MPE;
- else
- rctl &= ~E1000_RCTL_MPE;
- /* Enable VLAN filter if there is a VLAN */
- if (e1000_vlan_used(adapter))
- rctl |= E1000_RCTL_VFE;
- }
-
- if (netdev_uc_count(netdev) > rar_entries - 1) {
- rctl |= E1000_RCTL_UPE;
- } else if (!(netdev->flags & IFF_PROMISC)) {
- rctl &= ~E1000_RCTL_UPE;
- use_uc = true;
- }
-
- ew32(RCTL, rctl);
-
- /* 82542 2.0 needs to be in reset to write receive address registers */
-
- if (hw->mac_type == e1000_82542_rev2_0)
- e1000_enter_82542_rst(adapter);
-
- /* load the first 14 addresses into the exact filters 1-14. Unicast
- * addresses take precedence to avoid disabling unicast filtering
- * when possible.
- *
- * RAR 0 is used for the station MAC address
- * if there are not 14 addresses, go ahead and clear the filters
- */
- i = 1;
- if (use_uc)
- netdev_for_each_uc_addr(ha, netdev) {
- if (i == rar_entries)
- break;
- e1000_rar_set(hw, ha->addr, i++);
- }
-
- netdev_for_each_mc_addr(ha, netdev) {
- if (i == rar_entries) {
- /* load any remaining addresses into the hash table */
- u32 hash_reg, hash_bit, mta;
- hash_value = e1000_hash_mc_addr(hw, ha->addr);
- hash_reg = (hash_value >> 5) & 0x7F;
- hash_bit = hash_value & 0x1F;
- mta = (1 << hash_bit);
- mcarray[hash_reg] |= mta;
- } else {
- e1000_rar_set(hw, ha->addr, i++);
- }
- }
-
- for (; i < rar_entries; i++) {
- E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
- E1000_WRITE_FLUSH();
- E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
- E1000_WRITE_FLUSH();
- }
-
- /* write the hash table completely, write from bottom to avoid
- * both stupid write combining chipsets, and flushing each write */
- for (i = mta_reg_count - 1; i >= 0 ; i--) {
- /*
- * If we are on an 82544 has an errata where writing odd
- * offsets overwrites the previous even offset, but writing
- * backwards over the range solves the issue by always
- * writing the odd offset first
- */
- E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
- }
- E1000_WRITE_FLUSH();
-
- if (hw->mac_type == e1000_82542_rev2_0)
- e1000_leave_82542_rst(adapter);
-
- kfree(mcarray);
-}
-
-/* Need to wait a few seconds after link up to get diagnostic information from
- * the phy */
-
-static void e1000_update_phy_info(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *)data;
- schedule_work(&adapter->phy_info_task);
-}
-
-static void e1000_update_phy_info_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- phy_info_task);
- struct e1000_hw *hw = &adapter->hw;
-
- rtnl_lock();
- e1000_phy_get_info(hw, &adapter->phy_info);
- rtnl_unlock();
-}
-
-/**
- * e1000_82547_tx_fifo_stall - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void e1000_82547_tx_fifo_stall(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *)data;
- schedule_work(&adapter->fifo_stall_task);
-}
-
-/**
- * e1000_82547_tx_fifo_stall_task - task to complete work
- * @work: work struct contained inside adapter struct
- **/
-static void e1000_82547_tx_fifo_stall_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- fifo_stall_task);
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 tctl;
-
- rtnl_lock();
- if (atomic_read(&adapter->tx_fifo_stall)) {
- if ((er32(TDT) == er32(TDH)) &&
- (er32(TDFT) == er32(TDFH)) &&
- (er32(TDFTS) == er32(TDFHS))) {
- tctl = er32(TCTL);
- ew32(TCTL, tctl & ~E1000_TCTL_EN);
- ew32(TDFT, adapter->tx_head_addr);
- ew32(TDFH, adapter->tx_head_addr);
- ew32(TDFTS, adapter->tx_head_addr);
- ew32(TDFHS, adapter->tx_head_addr);
- ew32(TCTL, tctl);
- E1000_WRITE_FLUSH();
-
- adapter->tx_fifo_head = 0;
- atomic_set(&adapter->tx_fifo_stall, 0);
- netif_wake_queue(netdev);
- } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
- mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
- }
- }
- rtnl_unlock();
-}
-
-bool e1000_has_link(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- bool link_active = false;
-
- /* get_link_status is set on LSC (link status) interrupt or rx
- * sequence error interrupt (except on intel ce4100).
- * get_link_status will stay false until the
- * e1000_check_for_link establishes link for copper adapters
- * ONLY
- */
- switch (hw->media_type) {
- case e1000_media_type_copper:
- if (hw->mac_type == e1000_ce4100)
- hw->get_link_status = 1;
- if (hw->get_link_status) {
- e1000_check_for_link(hw);
- link_active = !hw->get_link_status;
- } else {
- link_active = true;
- }
- break;
- case e1000_media_type_fiber:
- e1000_check_for_link(hw);
- link_active = !!(er32(STATUS) & E1000_STATUS_LU);
- break;
- case e1000_media_type_internal_serdes:
- e1000_check_for_link(hw);
- link_active = hw->serdes_has_link;
- break;
- default:
- break;
- }
-
- return link_active;
-}
-
-/**
- * e1000_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void e1000_watchdog(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *)data;
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct e1000_tx_ring *txdr = adapter->tx_ring;
- u32 link, tctl;
-
- link = e1000_has_link(adapter);
- if ((netif_carrier_ok(netdev)) && link)
- goto link_up;
-
- if (link) {
- if (!netif_carrier_ok(netdev)) {
- u32 ctrl;
- bool txb2b = true;
- /* update snapshot of PHY registers on LSC */
- e1000_get_speed_and_duplex(hw,
- &adapter->link_speed,
- &adapter->link_duplex);
-
- ctrl = er32(CTRL);
- pr_info("%s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl &
- E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
- E1000_CTRL_RFCE) ? "RX" : ((ctrl &
- E1000_CTRL_TFCE) ? "TX" : "None")));
-
- /* adjust timeout factor according to speed/duplex */
- adapter->tx_timeout_factor = 1;
- switch (adapter->link_speed) {
- case SPEED_10:
- txb2b = false;
- adapter->tx_timeout_factor = 16;
- break;
- case SPEED_100:
- txb2b = false;
- /* maybe add some timeout factor ? */
- break;
- }
-
- /* enable transmits in the hardware */
- tctl = er32(TCTL);
- tctl |= E1000_TCTL_EN;
- ew32(TCTL, tctl);
-
- netif_carrier_on(netdev);
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
- adapter->smartspeed = 0;
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- pr_info("%s NIC Link is Down\n",
- netdev->name);
- netif_carrier_off(netdev);
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
- }
-
- e1000_smartspeed(adapter);
- }
-
-link_up:
- e1000_update_stats(adapter);
-
- hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
- adapter->tpt_old = adapter->stats.tpt;
- hw->collision_delta = adapter->stats.colc - adapter->colc_old;
- adapter->colc_old = adapter->stats.colc;
-
- adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
- adapter->gorcl_old = adapter->stats.gorcl;
- adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
- adapter->gotcl_old = adapter->stats.gotcl;
-
- e1000_update_adaptive(hw);
-
- if (!netif_carrier_ok(netdev)) {
- if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
- /* return immediately since reset is imminent */
- return;
- }
- }
-
- /* Simple mode for Interrupt Throttle Rate (ITR) */
- if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) {
- /*
- * Symmetric Tx/Rx gets a reduced ITR=2000;
- * Total asymmetrical Tx or Rx gets ITR=8000;
- * everyone else is between 2000-8000.
- */
- u32 goc = (adapter->gotcl + adapter->gorcl) / 10000;
- u32 dif = (adapter->gotcl > adapter->gorcl ?
- adapter->gotcl - adapter->gorcl :
- adapter->gorcl - adapter->gotcl) / 10000;
- u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
-
- ew32(ITR, 1000000000 / (itr * 256));
- }
-
- /* Cause software interrupt to ensure rx ring is cleaned */
- ew32(ICS, E1000_ICS_RXDMT0);
-
- /* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = true;
-
- /* Reset the timer */
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 2 * HZ));
-}
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-/**
- * e1000_update_itr - update the dynamic ITR value based on statistics
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- * this functionality is controlled by the InterruptThrottleRate module
- * parameter (see e1000_param.c)
- **/
-static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
- u16 itr_setting, int packets, int bytes)
-{
- unsigned int retval = itr_setting;
- struct e1000_hw *hw = &adapter->hw;
-
- if (unlikely(hw->mac_type < e1000_82540))
- goto update_itr_done;
-
- if (packets == 0)
- goto update_itr_done;
-
- switch (itr_setting) {
- case lowest_latency:
- /* jumbo frames get bulk treatment*/
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512))
- retval = low_latency;
- break;
- case low_latency: /* 50 usec aka 20000 ints/s */
- if (bytes > 10000) {
- /* jumbo frames need bulk latency setting */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
- retval = bulk_latency;
- else if ((packets > 35))
- retval = lowest_latency;
- } else if (bytes/packets > 2000)
- retval = bulk_latency;
- else if (packets <= 2 && bytes < 512)
- retval = lowest_latency;
- break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
- if (bytes > 25000) {
- if (packets > 35)
- retval = low_latency;
- } else if (bytes < 6000) {
- retval = low_latency;
- }
- break;
- }
-
-update_itr_done:
- return retval;
-}
-
-static void e1000_set_itr(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 current_itr;
- u32 new_itr = adapter->itr;
-
- if (unlikely(hw->mac_type < e1000_82540))
- return;
-
- /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
- if (unlikely(adapter->link_speed != SPEED_1000)) {
- current_itr = 0;
- new_itr = 4000;
- goto set_itr_now;
- }
-
- adapter->tx_itr = e1000_update_itr(adapter,
- adapter->tx_itr,
- adapter->total_tx_packets,
- adapter->total_tx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
- adapter->tx_itr = low_latency;
-
- adapter->rx_itr = e1000_update_itr(adapter,
- adapter->rx_itr,
- adapter->total_rx_packets,
- adapter->total_rx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
- adapter->rx_itr = low_latency;
-
- current_itr = max(adapter->rx_itr, adapter->tx_itr);
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 70000;
- break;
- case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
- break;
- case bulk_latency:
- new_itr = 4000;
- break;
- default:
- break;
- }
-
-set_itr_now:
- if (new_itr != adapter->itr) {
- /* this attempts to bias the interrupt rate towards Bulk
- * by adding intermediate steps when interrupt rate is
- * increasing */
- new_itr = new_itr > adapter->itr ?
- min(adapter->itr + (new_itr >> 2), new_itr) :
- new_itr;
- adapter->itr = new_itr;
- ew32(ITR, 1000000000 / (new_itr * 256));
- }
-}
-
-#define E1000_TX_FLAGS_CSUM 0x00000001
-#define E1000_TX_FLAGS_VLAN 0x00000002
-#define E1000_TX_FLAGS_TSO 0x00000004
-#define E1000_TX_FLAGS_IPV4 0x00000008
-#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
-#define E1000_TX_FLAGS_VLAN_SHIFT 16
-
-static int e1000_tso(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
-{
- struct e1000_context_desc *context_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i;
- u32 cmd_length = 0;
- u16 ipcse = 0, tucse, mss;
- u8 ipcss, ipcso, tucss, tucso, hdr_len;
- int err;
-
- if (skb_is_gso(skb)) {
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err)
- return err;
- }
-
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- mss = skb_shinfo(skb)->gso_size;
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
- cmd_length = E1000_TXD_CMD_IP;
- ipcse = skb_transport_offset(skb) - 1;
- } else if (skb->protocol == htons(ETH_P_IPV6)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check =
- ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- ipcse = 0;
- }
- ipcss = skb_network_offset(skb);
- ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
- tucss = skb_transport_offset(skb);
- tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- tucse = 0;
-
- cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
-
- i = tx_ring->next_to_use;
- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
-
- context_desc->lower_setup.ip_fields.ipcss = ipcss;
- context_desc->lower_setup.ip_fields.ipcso = ipcso;
- context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
- context_desc->upper_setup.tcp_fields.tucss = tucss;
- context_desc->upper_setup.tcp_fields.tucso = tucso;
- context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
- context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
- context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
- context_desc->cmd_and_length = cpu_to_le32(cmd_length);
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
-
- if (++i == tx_ring->count) i = 0;
- tx_ring->next_to_use = i;
-
- return true;
- }
- return false;
-}
-
-static bool e1000_tx_csum(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
-{
- struct e1000_context_desc *context_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i;
- u8 css;
- u32 cmd_len = E1000_TXD_CMD_DEXT;
-
- if (skb->ip_summed != CHECKSUM_PARTIAL)
- return false;
-
- switch (skb->protocol) {
- case cpu_to_be16(ETH_P_IP):
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- cmd_len |= E1000_TXD_CMD_TCP;
- break;
- case cpu_to_be16(ETH_P_IPV6):
- /* XXX not handling all IPV6 headers */
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- cmd_len |= E1000_TXD_CMD_TCP;
- break;
- default:
- if (unlikely(net_ratelimit()))
- e_warn(drv, "checksum_partial proto=%x!\n",
- skb->protocol);
- break;
- }
-
- css = skb_checksum_start_offset(skb);
-
- i = tx_ring->next_to_use;
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-
- context_desc->lower_setup.ip_config = 0;
- context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso =
- css + skb->csum_offset;
- context_desc->upper_setup.tcp_fields.tucse = 0;
- context_desc->tcp_seg_setup.data = 0;
- context_desc->cmd_and_length = cpu_to_le32(cmd_len);
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
-
- if (unlikely(++i == tx_ring->count)) i = 0;
- tx_ring->next_to_use = i;
-
- return true;
-}
-
-#define E1000_MAX_TXD_PWR 12
-#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
-
-static int e1000_tx_map(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring,
- struct sk_buff *skb, unsigned int first,
- unsigned int max_per_txd, unsigned int nr_frags,
- unsigned int mss)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_buffer *buffer_info;
- unsigned int len = skb_headlen(skb);
- unsigned int offset = 0, size, count = 0, i;
- unsigned int f;
-
- i = tx_ring->next_to_use;
-
- while (len) {
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, max_per_txd);
- /* Workaround for Controller erratum --
- * descriptor for non-tso packet in a linear SKB that follows a
- * tso gets written back prematurely before the data is fully
- * DMA'd to the controller */
- if (!skb->data_len && tx_ring->last_tx_tso &&
- !skb_is_gso(skb)) {
- tx_ring->last_tx_tso = 0;
- size -= 4;
- }
-
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && !nr_frags && size == len && size > 8))
- size -= 4;
- /* work-around for errata 10 and it applies
- * to all controllers in PCI-X mode
- * The fix is to make sure that the first descriptor of a
- * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
- */
- if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
- (size > 2015) && count == 0))
- size = 2015;
-
- /* Workaround for potential 82544 hang in PCI-X. Avoid
- * terminating buffers within evenly-aligned dwords. */
- if (unlikely(adapter->pcix_82544 &&
- !((unsigned long)(skb->data + offset + size - 1) & 4) &&
- size > 4))
- size -= 4;
-
- buffer_info->length = size;
- /* set time_stamp *before* dma to help avoid a possible race */
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = false;
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = i;
-
- len -= size;
- offset += size;
- count++;
- if (len) {
- i++;
- if (unlikely(i == tx_ring->count))
- i = 0;
- }
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = frag->page_offset;
-
- while (len) {
- i++;
- if (unlikely(i == tx_ring->count))
- i = 0;
-
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, max_per_txd);
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
- size -= 4;
- /* Workaround for potential 82544 hang in PCI-X.
- * Avoid terminating buffers within evenly-aligned
- * dwords. */
- if (unlikely(adapter->pcix_82544 &&
- !((unsigned long)(page_to_phys(frag->page) + offset
- + size - 1) & 4) &&
- size > 4))
- size -= 4;
-
- buffer_info->length = size;
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = true;
- buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
- offset, size,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = i;
-
- len -= size;
- offset += size;
- count++;
- }
- }
-
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
- buffer_info->dma = 0;
- if (count)
- count--;
-
- while (count--) {
- if (i==0)
- i += tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- e1000_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- return 0;
-}
-
-static void e1000_tx_queue(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring, int tx_flags,
- int count)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_tx_desc *tx_desc = NULL;
- struct e1000_buffer *buffer_info;
- u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
- unsigned int i;
-
- if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- E1000_TXD_CMD_TSE;
- txd_upper |= E1000_TXD_POPTS_TXSM << 8;
-
- if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
- txd_upper |= E1000_TXD_POPTS_IXSM << 8;
- }
-
- if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
- txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- }
-
- if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
- txd_lower |= E1000_TXD_CMD_VLE;
- txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
- }
-
- i = tx_ring->next_to_use;
-
- while (count--) {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->lower.data =
- cpu_to_le32(txd_lower | buffer_info->length);
- tx_desc->upper.data = cpu_to_le32(txd_upper);
- if (unlikely(++i == tx_ring->count)) i = 0;
- }
-
- tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, hw->hw_addr + tx_ring->tdt);
- /* we need this if more than one processor can write to our tail
- * at a time, it syncronizes IO on IA64/Altix systems */
- mmiowb();
-}
-
-/**
- * 82547 workaround to avoid controller hang in half-duplex environment.
- * The workaround is to avoid queuing a large packet that would span
- * the internal Tx FIFO ring boundary by notifying the stack to resend
- * the packet at a later time. This gives the Tx FIFO an opportunity to
- * flush all packets. When that occurs, we reset the Tx FIFO pointers
- * to the beginning of the Tx FIFO.
- **/
-
-#define E1000_FIFO_HDR 0x10
-#define E1000_82547_PAD_LEN 0x3E0
-
-static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
- struct sk_buff *skb)
-{
- u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
- u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
-
- skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
-
- if (adapter->link_duplex != HALF_DUPLEX)
- goto no_fifo_stall_required;
-
- if (atomic_read(&adapter->tx_fifo_stall))
- return 1;
-
- if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
- atomic_set(&adapter->tx_fifo_stall, 1);
- return 1;
- }
-
-no_fifo_stall_required:
- adapter->tx_fifo_head += skb_fifo_len;
- if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
- adapter->tx_fifo_head -= adapter->tx_fifo_size;
- return 0;
-}
-
-static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_tx_ring *tx_ring = adapter->tx_ring;
-
- netif_stop_queue(netdev);
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (likely(E1000_DESC_UNUSED(tx_ring) < size))
- return -EBUSY;
-
- /* A reprieve! */
- netif_start_queue(netdev);
- ++adapter->restart_queue;
- return 0;
-}
-
-static int e1000_maybe_stop_tx(struct net_device *netdev,
- struct e1000_tx_ring *tx_ring, int size)
-{
- if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
- return 0;
- return __e1000_maybe_stop_tx(netdev, size);
-}
-
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_tx_ring *tx_ring;
- unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
- unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
- unsigned int tx_flags = 0;
- unsigned int len = skb_headlen(skb);
- unsigned int nr_frags;
- unsigned int mss;
- int count = 0;
- int tso;
- unsigned int f;
-
- /* This goes back to the question of how to logically map a tx queue
- * to a flow. Right now, performance is impacted slightly negatively
- * if using multiple tx queues. If the stack breaks away from a
- * single qdisc implementation, we can look at this again. */
- tx_ring = adapter->tx_ring;
-
- if (unlikely(skb->len <= 0)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- mss = skb_shinfo(skb)->gso_size;
- /* The controller does a simple calculation to
- * make sure there is enough room in the FIFO before
- * initiating the DMA for each buffer. The calc is:
- * 4 = ceil(buffer len/mss). To make sure we don't
- * overrun the FIFO, adjust the max buffer len if mss
- * drops. */
- if (mss) {
- u8 hdr_len;
- max_per_txd = min(mss << 2, max_per_txd);
- max_txd_pwr = fls(max_per_txd) - 1;
-
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- if (skb->data_len && hdr_len == len) {
- switch (hw->mac_type) {
- unsigned int pull_size;
- case e1000_82544:
- /* Make sure we have room to chop off 4 bytes,
- * and that the end alignment will work out to
- * this hardware's requirements
- * NOTE: this is a TSO only workaround
- * if end byte alignment not correct move us
- * into the next dword */
- if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
- break;
- /* fall through */
- pull_size = min((unsigned int)4, skb->data_len);
- if (!__pskb_pull_tail(skb, pull_size)) {
- e_err(drv, "__pskb_pull_tail "
- "failed.\n");
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
- len = skb_headlen(skb);
- break;
- default:
- /* do nothing */
- break;
- }
- }
- }
-
- /* reserve a descriptor for the offload context */
- if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
- count++;
- count++;
-
- /* Controller Erratum workaround */
- if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
- count++;
-
- count += TXD_USE_COUNT(len, max_txd_pwr);
-
- if (adapter->pcix_82544)
- count++;
-
- /* work-around for errata 10 and it applies to all controllers
- * in PCI-X mode, so add one more descriptor to the count
- */
- if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
- (len > 2015)))
- count++;
-
- nr_frags = skb_shinfo(skb)->nr_frags;
- for (f = 0; f < nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
- max_txd_pwr);
- if (adapter->pcix_82544)
- count += nr_frags;
-
- /* need: count + 2 desc gap to keep tail from touching
- * head, otherwise try next time */
- if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
- return NETDEV_TX_BUSY;
-
- if (unlikely(hw->mac_type == e1000_82547)) {
- if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
- netif_stop_queue(netdev);
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->tx_fifo_stall_timer,
- jiffies + 1);
- return NETDEV_TX_BUSY;
- }
- }
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= E1000_TX_FLAGS_VLAN;
- tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- }
-
- first = tx_ring->next_to_use;
-
- tso = e1000_tso(adapter, tx_ring, skb);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (likely(tso)) {
- if (likely(hw->mac_type != e1000_82544))
- tx_ring->last_tx_tso = 1;
- tx_flags |= E1000_TX_FLAGS_TSO;
- } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
- tx_flags |= E1000_TX_FLAGS_CSUM;
-
- if (likely(skb->protocol == htons(ETH_P_IP)))
- tx_flags |= E1000_TX_FLAGS_IPV4;
-
- count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
- nr_frags, mss);
-
- if (count) {
- e1000_tx_queue(adapter, tx_ring, tx_flags, count);
- /* Make sure there is space in the ring for the next send. */
- e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
-
- } else {
- dev_kfree_skb_any(skb);
- tx_ring->buffer_info[first].time_stamp = 0;
- tx_ring->next_to_use = first;
- }
-
- return NETDEV_TX_OK;
-}
-
-/**
- * e1000_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-
-static void e1000_tx_timeout(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
-}
-
-static void e1000_reset_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter =
- container_of(work, struct e1000_adapter, reset_task);
-
- e1000_reinit_safe(adapter);
-}
-
-/**
- * e1000_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- *
- * Returns the address of the device statistics structure.
- * The statistics are actually updated from the timer callback.
- **/
-
-static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
-{
- /* only return the current stats */
- return &netdev->stats;
-}
-
-/**
- * e1000_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
-
- if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
- (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- e_err(probe, "Invalid MTU setting\n");
- return -EINVAL;
- }
-
- /* Adapter-specific max frame size limits. */
- switch (hw->mac_type) {
- case e1000_undefined ... e1000_82542_rev2_1:
- if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
- e_err(probe, "Jumbo Frames not supported.\n");
- return -EINVAL;
- }
- break;
- default:
- /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
- break;
- }
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
- msleep(1);
- /* e1000_down has a dependency on max_frame_size */
- hw->max_frame_size = max_frame;
- if (netif_running(netdev))
- e1000_down(adapter);
-
- /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- * however with the new *_jumbo_rx* routines, jumbo receives will use
- * fragmented skbs */
-
- if (max_frame <= E1000_RXBUFFER_2048)
- adapter->rx_buffer_len = E1000_RXBUFFER_2048;
- else
-#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
- adapter->rx_buffer_len = E1000_RXBUFFER_16384;
-#elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
- adapter->rx_buffer_len = PAGE_SIZE;
-#endif
-
- /* adjust allocation if LPE protects us, and we aren't using SBP */
- if (!hw->tbi_compatibility_on &&
- ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
- (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
- adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-
- pr_info("%s changing MTU from %d to %d\n",
- netdev->name, netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
-
- if (netif_running(netdev))
- e1000_up(adapter);
- else
- e1000_reset(adapter);
-
- clear_bit(__E1000_RESETTING, &adapter->flags);
-
- return 0;
-}
-
-/**
- * e1000_update_stats - Update the board statistics counters
- * @adapter: board private structure
- **/
-
-void e1000_update_stats(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- unsigned long flags;
- u16 phy_tmp;
-
-#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
-
- /*
- * Prevent stats update while adapter is being reset, or if the pci
- * connection is down.
- */
- if (adapter->link_speed == 0)
- return;
- if (pci_channel_offline(pdev))
- return;
-
- spin_lock_irqsave(&adapter->stats_lock, flags);
-
- /* these counters are modified from e1000_tbi_adjust_stats,
- * called from the interrupt context, so they must only
- * be written while holding adapter->stats_lock
- */
-
- adapter->stats.crcerrs += er32(CRCERRS);
- adapter->stats.gprc += er32(GPRC);
- adapter->stats.gorcl += er32(GORCL);
- adapter->stats.gorch += er32(GORCH);
- adapter->stats.bprc += er32(BPRC);
- adapter->stats.mprc += er32(MPRC);
- adapter->stats.roc += er32(ROC);
-
- adapter->stats.prc64 += er32(PRC64);
- adapter->stats.prc127 += er32(PRC127);
- adapter->stats.prc255 += er32(PRC255);
- adapter->stats.prc511 += er32(PRC511);
- adapter->stats.prc1023 += er32(PRC1023);
- adapter->stats.prc1522 += er32(PRC1522);
-
- adapter->stats.symerrs += er32(SYMERRS);
- adapter->stats.mpc += er32(MPC);
- adapter->stats.scc += er32(SCC);
- adapter->stats.ecol += er32(ECOL);
- adapter->stats.mcc += er32(MCC);
- adapter->stats.latecol += er32(LATECOL);
- adapter->stats.dc += er32(DC);
- adapter->stats.sec += er32(SEC);
- adapter->stats.rlec += er32(RLEC);
- adapter->stats.xonrxc += er32(XONRXC);
- adapter->stats.xontxc += er32(XONTXC);
- adapter->stats.xoffrxc += er32(XOFFRXC);
- adapter->stats.xofftxc += er32(XOFFTXC);
- adapter->stats.fcruc += er32(FCRUC);
- adapter->stats.gptc += er32(GPTC);
- adapter->stats.gotcl += er32(GOTCL);
- adapter->stats.gotch += er32(GOTCH);
- adapter->stats.rnbc += er32(RNBC);
- adapter->stats.ruc += er32(RUC);
- adapter->stats.rfc += er32(RFC);
- adapter->stats.rjc += er32(RJC);
- adapter->stats.torl += er32(TORL);
- adapter->stats.torh += er32(TORH);
- adapter->stats.totl += er32(TOTL);
- adapter->stats.toth += er32(TOTH);
- adapter->stats.tpr += er32(TPR);
-
- adapter->stats.ptc64 += er32(PTC64);
- adapter->stats.ptc127 += er32(PTC127);
- adapter->stats.ptc255 += er32(PTC255);
- adapter->stats.ptc511 += er32(PTC511);
- adapter->stats.ptc1023 += er32(PTC1023);
- adapter->stats.ptc1522 += er32(PTC1522);
-
- adapter->stats.mptc += er32(MPTC);
- adapter->stats.bptc += er32(BPTC);
-
- /* used for adaptive IFS */
-
- hw->tx_packet_delta = er32(TPT);
- adapter->stats.tpt += hw->tx_packet_delta;
- hw->collision_delta = er32(COLC);
- adapter->stats.colc += hw->collision_delta;
-
- if (hw->mac_type >= e1000_82543) {
- adapter->stats.algnerrc += er32(ALGNERRC);
- adapter->stats.rxerrc += er32(RXERRC);
- adapter->stats.tncrs += er32(TNCRS);
- adapter->stats.cexterr += er32(CEXTERR);
- adapter->stats.tsctc += er32(TSCTC);
- adapter->stats.tsctfc += er32(TSCTFC);
- }
-
- /* Fill out the OS statistics structure */
- netdev->stats.multicast = adapter->stats.mprc;
- netdev->stats.collisions = adapter->stats.colc;
-
- /* Rx Errors */
-
- /* RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC */
- netdev->stats.rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
- netdev->stats.rx_length_errors = adapter->stats.rlerrc;
- netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
- netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
- netdev->stats.rx_missed_errors = adapter->stats.mpc;
-
- /* Tx Errors */
- adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
- netdev->stats.tx_errors = adapter->stats.txerrc;
- netdev->stats.tx_aborted_errors = adapter->stats.ecol;
- netdev->stats.tx_window_errors = adapter->stats.latecol;
- netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
- if (hw->bad_tx_carr_stats_fd &&
- adapter->link_duplex == FULL_DUPLEX) {
- netdev->stats.tx_carrier_errors = 0;
- adapter->stats.tncrs = 0;
- }
-
- /* Tx Dropped needs to be maintained elsewhere */
-
- /* Phy Stats */
- if (hw->media_type == e1000_media_type_copper) {
- if ((adapter->link_speed == SPEED_1000) &&
- (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
- phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
- adapter->phy_stats.idle_errors += phy_tmp;
- }
-
- if ((hw->mac_type <= e1000_82546) &&
- (hw->phy_type == e1000_phy_m88) &&
- !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
- adapter->phy_stats.receive_errors += phy_tmp;
- }
-
- /* Management Stats */
- if (hw->has_smbus) {
- adapter->stats.mgptc += er32(MGTPTC);
- adapter->stats.mgprc += er32(MGTPRC);
- adapter->stats.mgpdc += er32(MGTPDC);
- }
-
- spin_unlock_irqrestore(&adapter->stats_lock, flags);
-}
-
-/**
- * e1000_intr - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-
-static irqreturn_t e1000_intr(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = er32(ICR);
-
- if (unlikely((!icr)))
- return IRQ_NONE; /* Not our interrupt */
-
- /*
- * we might have caused the interrupt, but the above
- * read cleared it, and just in case the driver is
- * down there is nothing to do so return handled
- */
- if (unlikely(test_bit(__E1000_DOWN, &adapter->flags)))
- return IRQ_HANDLED;
-
- if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
- hw->get_link_status = 1;
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- /* disable interrupts, without the synchronize_irq bit */
- ew32(IMC, ~0);
- E1000_WRITE_FLUSH();
-
- if (likely(napi_schedule_prep(&adapter->napi))) {
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- } else {
- /* this really should not happen! if it does it is basically a
- * bug, but not a hard error, so enable ints and continue */
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_enable(adapter);
- }
-
- return IRQ_HANDLED;
-}
-
-/**
- * e1000_clean - NAPI Rx polling callback
- * @adapter: board private structure
- **/
-static int e1000_clean(struct napi_struct *napi, int budget)
-{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
- int tx_clean_complete = 0, work_done = 0;
-
- tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
-
- adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
-
- if (!tx_clean_complete)
- work_done = budget;
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- if (likely(adapter->itr_setting & 3))
- e1000_set_itr(adapter);
- napi_complete(napi);
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_enable(adapter);
- }
-
- return work_done;
-}
-
-/**
- * e1000_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- **/
-static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
- struct e1000_tx_ring *tx_ring)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct e1000_tx_desc *tx_desc, *eop_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i, eop;
- unsigned int count = 0;
- unsigned int total_tx_bytes=0, total_tx_packets=0;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-
- while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- (count < tx_ring->count)) {
- bool cleaned = false;
- rmb(); /* read buffer_info after eop_desc */
- for ( ; !cleaned; count++) {
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- cleaned = (i == eop);
-
- if (cleaned) {
- struct sk_buff *skb = buffer_info->skb;
- unsigned int segs, bytecount;
- segs = skb_shinfo(skb)->gso_segs ?: 1;
- /* multiply data chunks by size of headers */
- bytecount = ((segs - 1) * skb_headlen(skb)) +
- skb->len;
- total_tx_packets += segs;
- total_tx_bytes += bytecount;
- }
- e1000_unmap_and_free_tx_resource(adapter, buffer_info);
- tx_desc->upper.data = 0;
-
- if (unlikely(++i == tx_ring->count)) i = 0;
- }
-
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
-#define TX_WAKE_THRESHOLD 32
- if (unlikely(count && netif_carrier_ok(netdev) &&
- E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
-
- if (netif_queue_stopped(netdev) &&
- !(test_bit(__E1000_DOWN, &adapter->flags))) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
- }
-
- if (adapter->detect_tx_hung) {
- /* Detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
- adapter->detect_tx_hung = false;
- if (tx_ring->buffer_info[eop].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
- (adapter->tx_timeout_factor * HZ)) &&
- !(er32(STATUS) & E1000_STATUS_TXOFF)) {
-
- /* detected Tx unit hang */
- e_err(drv, "Detected Tx Unit Hang\n"
- " Tx Queue <%lu>\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- (unsigned long)((tx_ring - adapter->tx_ring) /
- sizeof(struct e1000_tx_ring)),
- readl(hw->hw_addr + tx_ring->tdh),
- readl(hw->hw_addr + tx_ring->tdt),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status);
- netif_stop_queue(netdev);
- }
- }
- adapter->total_tx_bytes += total_tx_bytes;
- adapter->total_tx_packets += total_tx_packets;
- netdev->stats.tx_bytes += total_tx_bytes;
- netdev->stats.tx_packets += total_tx_packets;
- return count < tx_ring->count;
-}
-
-/**
- * e1000_rx_checksum - Receive Checksum Offload for 82543
- * @adapter: board private structure
- * @status_err: receive descriptor status and error fields
- * @csum: receive descriptor csum field
- * @sk_buff: socket buffer with received data
- **/
-
-static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- u32 csum, struct sk_buff *skb)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 status = (u16)status_err;
- u8 errors = (u8)(status_err >> 24);
-
- skb_checksum_none_assert(skb);
-
- /* 82543 or newer only */
- if (unlikely(hw->mac_type < e1000_82543)) return;
- /* Ignore Checksum bit is set */
- if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
- /* TCP/UDP checksum error bit is set */
- if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
- /* let the stack verify checksum errors */
- adapter->hw_csum_err++;
- return;
- }
- /* TCP/UDP Checksum has not been calculated */
- if (!(status & E1000_RXD_STAT_TCPCS))
- return;
-
- /* It must be a TCP or UDP packet with a valid checksum */
- if (likely(status & E1000_RXD_STAT_TCPCS)) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- }
- adapter->hw_csum_good++;
-}
-
-/**
- * e1000_consume_page - helper function
- **/
-static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
-{
- bi->page = NULL;
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
-}
-
-/**
- * e1000_receive_skb - helper function to handle rx indications
- * @adapter: board private structure
- * @status: descriptor status field as written by hardware
- * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
- * @skb: pointer to sk_buff to be indicated to stack
- */
-static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
- __le16 vlan, struct sk_buff *skb)
-{
- skb->protocol = eth_type_trans(skb, adapter->netdev);
-
- if (status & E1000_RXD_STAT_VP) {
- u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
-
- __vlan_hwaccel_put_tag(skb, vid);
- }
- napi_gro_receive(&adapter->napi, skb);
-}
-
-/**
- * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- * @rx_ring: ring to clean
- * @work_done: amount of napi work completed this call
- * @work_to_do: max amount of work allowed for this call to do
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- */
-static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- unsigned long irq_flags;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- if (++i == rx_ring->count) i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = true;
- cleaned_count++;
- dma_unmap_page(&pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
-
- /* errors is only valid for DD + EOP descriptors */
- if (unlikely((status & E1000_RXD_STAT_EOP) &&
- (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
- u8 last_byte = *(skb->data + length - 1);
- if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
- last_byte)) {
- spin_lock_irqsave(&adapter->stats_lock,
- irq_flags);
- e1000_tbi_adjust_stats(hw, &adapter->stats,
- length, skb->data);
- spin_unlock_irqrestore(&adapter->stats_lock,
- irq_flags);
- length--;
- } else {
- /* recycle both page and skb */
- buffer_info->skb = skb;
- /* an error means any chain goes out the window
- * too */
- if (rx_ring->rx_skb_top)
- dev_kfree_skb(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- goto next_desc;
- }
- }
-
-#define rxtop rx_ring->rx_skb_top
- if (!(status & E1000_RXD_STAT_EOP)) {
- /* this descriptor is only the beginning (or middle) */
- if (!rxtop) {
- /* this is the beginning of a chain */
- rxtop = skb;
- skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
- } else {
- /* this is the middle of a chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the skb, only consumed the page */
- buffer_info->skb = skb;
- }
- e1000_consume_page(buffer_info, rxtop, length);
- goto next_desc;
- } else {
- if (rxtop) {
- /* end of the chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the current skb, we only consumed the
- * page */
- buffer_info->skb = skb;
- skb = rxtop;
- rxtop = NULL;
- e1000_consume_page(buffer_info, skb, length);
- } else {
- /* no chain, got EOP, this buf is the packet
- * copybreak to save the put_page/alloc_page */
- if (length <= copybreak &&
- skb_tailroom(skb) >= length) {
- u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb), vaddr, length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
- /* re-use the page, so don't erase
- * buffer_info->page */
- skb_put(skb, length);
- } else {
- skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
- e1000_consume_page(buffer_info, skb,
- length);
- }
- }
- }
-
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- pskb_trim(skb, skb->len - 4);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- /* eth type trans needs skb->data to point to something */
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- e_err(drv, "pskb_may_pull failed.\n");
- dev_kfree_skb(skb);
- goto next_desc;
- }
-
- e1000_receive_skb(adapter, status, rx_desc->special, skb);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = E1000_DESC_UNUSED(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-
- adapter->total_rx_packets += total_rx_packets;
- adapter->total_rx_bytes += total_rx_bytes;
- netdev->stats.rx_bytes += total_rx_bytes;
- netdev->stats.rx_packets += total_rx_packets;
- return cleaned;
-}
-
-/*
- * this should improve performance for small packets with large amounts
- * of reassembly being done in the stack
- */
-static void e1000_check_copybreak(struct net_device *netdev,
- struct e1000_buffer *buffer_info,
- u32 length, struct sk_buff **skb)
-{
- struct sk_buff *new_skb;
-
- if (length > copybreak)
- return;
-
- new_skb = netdev_alloc_skb_ip_align(netdev, length);
- if (!new_skb)
- return;
-
- skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
- (*skb)->data - NET_IP_ALIGN,
- length + NET_IP_ALIGN);
- /* save the skb in buffer_info as good */
- buffer_info->skb = *skb;
- *skb = new_skb;
-}
-
-/**
- * e1000_clean_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- * @rx_ring: ring to clean
- * @work_done: amount of napi work completed this call
- * @work_to_do: max amount of work allowed for this call to do
- */
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int *work_done, int work_to_do)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- unsigned long flags;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- prefetch(skb->data - NET_IP_ALIGN);
-
- if (++i == rx_ring->count) i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = true;
- cleaned_count++;
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
- /* !EOP means multiple descriptors were used to store a single
- * packet, if thats the case we need to toss it. In fact, we
- * to toss every packet with the EOP bit clear and the next
- * frame that _does_ have the EOP bit set, as it is by
- * definition only a frame fragment
- */
- if (unlikely(!(status & E1000_RXD_STAT_EOP)))
- adapter->discarding = true;
-
- if (adapter->discarding) {
- /* All receives must fit into a single buffer */
- e_dbg("Receive packet consumed multiple buffers\n");
- /* recycle */
- buffer_info->skb = skb;
- if (status & E1000_RXD_STAT_EOP)
- adapter->discarding = false;
- goto next_desc;
- }
-
- if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
- u8 last_byte = *(skb->data + length - 1);
- if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
- last_byte)) {
- spin_lock_irqsave(&adapter->stats_lock, flags);
- e1000_tbi_adjust_stats(hw, &adapter->stats,
- length, skb->data);
- spin_unlock_irqrestore(&adapter->stats_lock,
- flags);
- length--;
- } else {
- /* recycle */
- buffer_info->skb = skb;
- goto next_desc;
- }
- }
-
- /* adjust length to remove Ethernet CRC, this must be
- * done after the TBI_ACCEPT workaround above */
- length -= 4;
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += length;
- total_rx_packets++;
-
- e1000_check_copybreak(netdev, buffer_info, length, &skb);
-
- skb_put(skb, length);
-
- /* Receive Checksum Offload */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- e1000_receive_skb(adapter, status, rx_desc->special, skb);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = E1000_DESC_UNUSED(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
-
- adapter->total_rx_packets += total_rx_packets;
- adapter->total_rx_bytes += total_rx_bytes;
- netdev->stats.rx_bytes += total_rx_bytes;
- netdev->stats.rx_packets += total_rx_packets;
- return cleaned;
-}
-
-/**
- * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
- * @adapter: address of board private structure
- * @rx_ring: pointer to receive ring structure
- * @cleaned_count: number of buffers to allocate this pass
- **/
-
-static void
-e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring, int cleaned_count)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto check_page;
- }
-
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- /* Fix for errata 23, can't cross 64kB boundary */
- if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
- struct sk_buff *oldskb = skb;
- e_err(rx_err, "skb align check failed: %u bytes at "
- "%p\n", bufsz, skb->data);
- /* Try again, without freeing the previous */
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- /* Failed allocation, critical failure */
- if (!skb) {
- dev_kfree_skb(oldskb);
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
- /* give up */
- dev_kfree_skb(skb);
- dev_kfree_skb(oldskb);
- break; /* while (cleaned_count--) */
- }
-
- /* Use new allocation */
- dev_kfree_skb(oldskb);
- }
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
-check_page:
- /* allocate a new page if necessary */
- if (!buffer_info->page) {
- buffer_info->page = alloc_page(GFP_ATOMIC);
- if (unlikely(!buffer_info->page)) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
- }
-
- if (!buffer_info->dma) {
- buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- buffer_info->length,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- put_page(buffer_info->page);
- dev_kfree_skb(skb);
- buffer_info->page = NULL;
- buffer_info->skb = NULL;
- buffer_info->dma = 0;
- adapter->alloc_rx_buff_failed++;
- break; /* while !buffer_info->skb */
- }
- }
-
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- if (unlikely(++i == rx_ring->count))
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (likely(rx_ring->next_to_use != i)) {
- rx_ring->next_to_use = i;
- if (unlikely(i-- == 0))
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->rdt);
- }
-}
-
-/**
- * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
- * @adapter: address of board private structure
- **/
-
-static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
- struct e1000_rx_ring *rx_ring,
- int cleaned_count)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = adapter->rx_buffer_len;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto map_skb;
- }
-
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- /* Fix for errata 23, can't cross 64kB boundary */
- if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
- struct sk_buff *oldskb = skb;
- e_err(rx_err, "skb align check failed: %u bytes at "
- "%p\n", bufsz, skb->data);
- /* Try again, without freeing the previous */
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- /* Failed allocation, critical failure */
- if (!skb) {
- dev_kfree_skb(oldskb);
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
- /* give up */
- dev_kfree_skb(skb);
- dev_kfree_skb(oldskb);
- adapter->alloc_rx_buff_failed++;
- break; /* while !buffer_info->skb */
- }
-
- /* Use new allocation */
- dev_kfree_skb(oldskb);
- }
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
-map_skb:
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data,
- buffer_info->length,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_kfree_skb(skb);
- buffer_info->skb = NULL;
- buffer_info->dma = 0;
- adapter->alloc_rx_buff_failed++;
- break; /* while !buffer_info->skb */
- }
-
- /*
- * XXX if it was allocated cleanly it will never map to a
- * boundary crossing
- */
-
- /* Fix for errata 23, can't cross 64kB boundary */
- if (!e1000_check_64k_bound(adapter,
- (void *)(unsigned long)buffer_info->dma,
- adapter->rx_buffer_len)) {
- e_err(rx_err, "dma align check failed: %u bytes at "
- "%p\n", adapter->rx_buffer_len,
- (void *)(unsigned long)buffer_info->dma);
- dev_kfree_skb(skb);
- buffer_info->skb = NULL;
-
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- adapter->alloc_rx_buff_failed++;
- break; /* while !buffer_info->skb */
- }
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- if (unlikely(++i == rx_ring->count))
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (likely(rx_ring->next_to_use != i)) {
- rx_ring->next_to_use = i;
- if (unlikely(i-- == 0))
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, hw->hw_addr + rx_ring->rdt);
- }
-}
-
-/**
- * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
- * @adapter:
- **/
-
-static void e1000_smartspeed(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 phy_status;
- u16 phy_ctrl;
-
- if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
- !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
- return;
-
- if (adapter->smartspeed == 0) {
- /* If Master/Slave config fault is asserted twice,
- * we assume back-to-back */
- e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
- if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
- e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
- if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
- e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
- if (phy_ctrl & CR_1000T_MS_ENABLE) {
- phy_ctrl &= ~CR_1000T_MS_ENABLE;
- e1000_write_phy_reg(hw, PHY_1000T_CTRL,
- phy_ctrl);
- adapter->smartspeed++;
- if (!e1000_phy_setup_autoneg(hw) &&
- !e1000_read_phy_reg(hw, PHY_CTRL,
- &phy_ctrl)) {
- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
- MII_CR_RESTART_AUTO_NEG);
- e1000_write_phy_reg(hw, PHY_CTRL,
- phy_ctrl);
- }
- }
- return;
- } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
- /* If still no link, perhaps using 2/3 pair cable */
- e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
- phy_ctrl |= CR_1000T_MS_ENABLE;
- e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
- if (!e1000_phy_setup_autoneg(hw) &&
- !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
- phy_ctrl |= (MII_CR_AUTO_NEG_EN |
- MII_CR_RESTART_AUTO_NEG);
- e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
- }
- }
- /* Restart process after E1000_SMARTSPEED_MAX iterations */
- if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
- adapter->smartspeed = 0;
-}
-
-/**
- * e1000_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- **/
-
-static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- return e1000_mii_ioctl(netdev, ifr, cmd);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-/**
- * e1000_mii_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- **/
-
-static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
- int cmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct mii_ioctl_data *data = if_mii(ifr);
- int retval;
- u16 mii_reg;
- unsigned long flags;
-
- if (hw->media_type != e1000_media_type_copper)
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = hw->phy_addr;
- break;
- case SIOCGMIIREG:
- spin_lock_irqsave(&adapter->stats_lock, flags);
- if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
- &data->val_out)) {
- spin_unlock_irqrestore(&adapter->stats_lock, flags);
- return -EIO;
- }
- spin_unlock_irqrestore(&adapter->stats_lock, flags);
- break;
- case SIOCSMIIREG:
- if (data->reg_num & ~(0x1F))
- return -EFAULT;
- mii_reg = data->val_in;
- spin_lock_irqsave(&adapter->stats_lock, flags);
- if (e1000_write_phy_reg(hw, data->reg_num,
- mii_reg)) {
- spin_unlock_irqrestore(&adapter->stats_lock, flags);
- return -EIO;
- }
- spin_unlock_irqrestore(&adapter->stats_lock, flags);
- if (hw->media_type == e1000_media_type_copper) {
- switch (data->reg_num) {
- case PHY_CTRL:
- if (mii_reg & MII_CR_POWER_DOWN)
- break;
- if (mii_reg & MII_CR_AUTO_NEG_EN) {
- hw->autoneg = 1;
- hw->autoneg_advertised = 0x2F;
- } else {
- u32 speed;
- if (mii_reg & 0x40)
- speed = SPEED_1000;
- else if (mii_reg & 0x2000)
- speed = SPEED_100;
- else
- speed = SPEED_10;
- retval = e1000_set_spd_dplx(
- adapter, speed,
- ((mii_reg & 0x100)
- ? DUPLEX_FULL :
- DUPLEX_HALF));
- if (retval)
- return retval;
- }
- if (netif_running(adapter->netdev))
- e1000_reinit_locked(adapter);
- else
- e1000_reset(adapter);
- break;
- case M88E1000_PHY_SPEC_CTRL:
- case M88E1000_EXT_PHY_SPEC_CTRL:
- if (e1000_phy_reset(hw))
- return -EIO;
- break;
- }
- } else {
- switch (data->reg_num) {
- case PHY_CTRL:
- if (mii_reg & MII_CR_POWER_DOWN)
- break;
- if (netif_running(adapter->netdev))
- e1000_reinit_locked(adapter);
- else
- e1000_reset(adapter);
- break;
- }
- }
- break;
- default:
- return -EOPNOTSUPP;
- }
- return E1000_SUCCESS;
-}
-
-void e1000_pci_set_mwi(struct e1000_hw *hw)
-{
- struct e1000_adapter *adapter = hw->back;
- int ret_val = pci_set_mwi(adapter->pdev);
-
- if (ret_val)
- e_err(probe, "Error in setting MWI\n");
-}
-
-void e1000_pci_clear_mwi(struct e1000_hw *hw)
-{
- struct e1000_adapter *adapter = hw->back;
-
- pci_clear_mwi(adapter->pdev);
-}
-
-int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
-{
- struct e1000_adapter *adapter = hw->back;
- return pcix_get_mmrbc(adapter->pdev);
-}
-
-void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
-{
- struct e1000_adapter *adapter = hw->back;
- pcix_set_mmrbc(adapter->pdev, mmrbc);
-}
-
-void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
-{
- outl(value, port);
-}
-
-static bool e1000_vlan_used(struct e1000_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- return true;
- return false;
-}
-
-static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
- bool filter_on)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_disable(adapter);
-
- if (filter_on) {
- /* enable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_CFIEN;
- if (!(adapter->netdev->flags & IFF_PROMISC))
- rctl |= E1000_RCTL_VFE;
- ew32(RCTL, rctl);
- e1000_update_mng_vlan(adapter);
- } else {
- /* disable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~E1000_RCTL_VFE;
- ew32(RCTL, rctl);
- }
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_enable(adapter);
-}
-
-static void e1000_vlan_mode(struct net_device *netdev, u32 features)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl;
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_disable(adapter);
-
- ctrl = er32(CTRL);
- if (features & NETIF_F_HW_VLAN_RX) {
- /* enable VLAN tag insert/strip */
- ctrl |= E1000_CTRL_VME;
- } else {
- /* disable VLAN tag insert/strip */
- ctrl &= ~E1000_CTRL_VME;
- }
- ew32(CTRL, ctrl);
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_enable(adapter);
-}
-
-static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 vfta, index;
-
- if ((hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
- (vid == adapter->mng_vlan_id))
- return;
-
- if (!e1000_vlan_used(adapter))
- e1000_vlan_filter_on_off(adapter, true);
-
- /* add VID to filter table */
- index = (vid >> 5) & 0x7F;
- vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
- vfta |= (1 << (vid & 0x1F));
- e1000_write_vfta(hw, index, vfta);
-
- set_bit(vid, adapter->active_vlans);
-}
-
-static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 vfta, index;
-
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_disable(adapter);
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- e1000_irq_enable(adapter);
-
- /* remove VID from filter table */
- index = (vid >> 5) & 0x7F;
- vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
- vfta &= ~(1 << (vid & 0x1F));
- e1000_write_vfta(hw, index, vfta);
-
- clear_bit(vid, adapter->active_vlans);
-
- if (!e1000_vlan_used(adapter))
- e1000_vlan_filter_on_off(adapter, false);
-}
-
-static void e1000_restore_vlan(struct e1000_adapter *adapter)
-{
- u16 vid;
-
- if (!e1000_vlan_used(adapter))
- return;
-
- e1000_vlan_filter_on_off(adapter, true);
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- e1000_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- hw->autoneg = 0;
-
- /* Make sure dplx is at most 1 bit and lsb of speed is not set
- * for the switch() below to work */
- if ((spd & 1) || (dplx & ~1))
- goto err_inval;
-
- /* Fiber NICs only allow 1000 gbps Full duplex */
- if ((hw->media_type == e1000_media_type_fiber) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL)
- goto err_inval;
-
- switch (spd + dplx) {
- case SPEED_10 + DUPLEX_HALF:
- hw->forced_speed_duplex = e1000_10_half;
- break;
- case SPEED_10 + DUPLEX_FULL:
- hw->forced_speed_duplex = e1000_10_full;
- break;
- case SPEED_100 + DUPLEX_HALF:
- hw->forced_speed_duplex = e1000_100_half;
- break;
- case SPEED_100 + DUPLEX_FULL:
- hw->forced_speed_duplex = e1000_100_full;
- break;
- case SPEED_1000 + DUPLEX_FULL:
- hw->autoneg = 1;
- hw->autoneg_advertised = ADVERTISE_1000_FULL;
- break;
- case SPEED_1000 + DUPLEX_HALF: /* not supported */
- default:
- goto err_inval;
- }
- return 0;
-
-err_inval:
- e_err(probe, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
-}
-
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, ctrl_ext, rctl, status;
- u32 wufc = adapter->wol;
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev)) {
- WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
- e1000_down(adapter);
- }
-
-#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-#endif
-
- status = er32(STATUS);
- if (status & E1000_STATUS_LU)
- wufc &= ~E1000_WUFC_LNKC;
-
- if (wufc) {
- e1000_setup_rctl(adapter);
- e1000_set_rx_mode(netdev);
-
- /* turn on all-multi mode if wake on multicast is enabled */
- if (wufc & E1000_WUFC_MC) {
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_MPE;
- ew32(RCTL, rctl);
- }
-
- if (hw->mac_type >= e1000_82540) {
- ctrl = er32(CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
- ctrl |= E1000_CTRL_ADVD3WUC |
- E1000_CTRL_EN_PHY_PWR_MGMT;
- ew32(CTRL, ctrl);
- }
-
- if (hw->media_type == e1000_media_type_fiber ||
- hw->media_type == e1000_media_type_internal_serdes) {
- /* keep the laser running in D3 */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- ew32(WUC, E1000_WUC_PME_EN);
- ew32(WUFC, wufc);
- } else {
- ew32(WUC, 0);
- ew32(WUFC, 0);
- }
-
- e1000_release_manageability(adapter);
-
- *enable_wake = !!wufc;
-
- /* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->en_mng_pt)
- *enable_wake = true;
-
- if (netif_running(netdev))
- e1000_free_irq(adapter);
-
- pci_disable_device(pdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- int retval;
- bool wake;
-
- retval = __e1000_shutdown(pdev, &wake);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
-}
-
-static int e1000_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 err;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
-
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
- if (err) {
- pr_err("Cannot enable PCI device from suspend\n");
- return err;
- }
- pci_set_master(pdev);
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
- if (netif_running(netdev)) {
- err = e1000_request_irq(adapter);
- if (err)
- return err;
- }
-
- e1000_power_up_phy(adapter);
- e1000_reset(adapter);
- ew32(WUS, ~0);
-
- e1000_init_manageability(adapter);
-
- if (netif_running(netdev))
- e1000_up(adapter);
-
- netif_device_attach(netdev);
-
- return 0;
-}
-#endif
-
-static void e1000_shutdown(struct pci_dev *pdev)
-{
- bool wake;
-
- __e1000_shutdown(pdev, &wake);
-
- if (system_state == SYSTEM_POWER_OFF) {
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void e1000_netpoll(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- disable_irq(adapter->pdev->irq);
- e1000_intr(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
-}
-#endif
-
-/**
- * e1000_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- e1000_down(adapter);
- pci_disable_device(pdev);
-
- /* Request a slot slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * e1000_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the e1000_resume routine.
- */
-static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int err;
-
- if (adapter->need_ioport)
- err = pci_enable_device(pdev);
- else
- err = pci_enable_device_mem(pdev);
- if (err) {
- pr_err("Cannot re-enable PCI device after reset.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- pci_set_master(pdev);
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
- e1000_reset(adapter);
- ew32(WUS, ~0);
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * e1000_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation. Implementation resembles the
- * second-half of the e1000_resume routine.
- */
-static void e1000_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- e1000_init_manageability(adapter);
-
- if (netif_running(netdev)) {
- if (e1000_up(adapter)) {
- pr_info("can't bring device back up after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
-}
-
-/* e1000_main.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/* glue for the OS independent part of e1000
- * includes register access macros
- */
-
-#ifndef _E1000_OSDEP_H_
-#define _E1000_OSDEP_H_
-
-#include <asm/io.h>
-
-#define CONFIG_RAM_BASE 0x60000
-#define GBE_CONFIG_OFFSET 0x0
-
-#define GBE_CONFIG_RAM_BASE \
- ((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET))
-
-#define GBE_CONFIG_BASE_VIRT \
- ((void __iomem *)phys_to_virt(GBE_CONFIG_RAM_BASE))
-
-#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \
- (iowrite16_rep(base + offset, data, count))
-
-#define GBE_CONFIG_FLASH_READ(base, offset, count, data) \
- (ioread16_rep(base + (offset << 1), data, count))
-
-#define er32(reg) \
- (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
- ? E1000_##reg : E1000_82542_##reg)))
-
-#define ew32(reg, value) \
- (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
- ? E1000_##reg : E1000_82542_##reg))))
-
-#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
- writel((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- ((offset) << 2))))
-
-#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
- readl((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- ((offset) << 2)))
-
-#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
-#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
-
-#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
- writew((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- ((offset) << 1))))
-
-#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
- readw((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- ((offset) << 1)))
-
-#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
- writeb((value), ((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- (offset))))
-
-#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
- readb((a)->hw_addr + \
- (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
- (offset)))
-
-#define E1000_WRITE_FLUSH() er32(STATUS)
-
-#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
- writel((value), ((a)->flash_address + reg)))
-
-#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
- readl((a)->flash_address + reg))
-
-#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
- writew((value), ((a)->flash_address + reg)))
-
-#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
- readw((a)->flash_address + reg))
-
-#endif /* _E1000_OSDEP_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2006 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000.h"
-
-/* This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-
-#define E1000_MAX_NIC 32
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-/* All parameters are treated the same, as an integer array of values.
- * This macro just reduces the need to repeat the same declaration code
- * over and over (plus this helps to avoid typo bugs).
- */
-
-#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-#define E1000_PARAM(X, desc) \
- static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
- static unsigned int num_##X; \
- module_param_array_named(X, X, int, &num_##X, 0); \
- MODULE_PARM_DESC(X, desc);
-
-/* Transmit Descriptor Count
- *
- * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
- * Valid Range: 80-4096 for 82544 and newer
- *
- * Default Value: 256
- */
-E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
-
-/* Receive Descriptor Count
- *
- * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
- * Valid Range: 80-4096 for 82544 and newer
- *
- * Default Value: 256
- */
-E1000_PARAM(RxDescriptors, "Number of receive descriptors");
-
-/* User Specified Speed Override
- *
- * Valid Range: 0, 10, 100, 1000
- * - 0 - auto-negotiate at all supported speeds
- * - 10 - only link at 10 Mbps
- * - 100 - only link at 100 Mbps
- * - 1000 - only link at 1000 Mbps
- *
- * Default Value: 0
- */
-E1000_PARAM(Speed, "Speed setting");
-
-/* User Specified Duplex Override
- *
- * Valid Range: 0-2
- * - 0 - auto-negotiate for duplex
- * - 1 - only link at half duplex
- * - 2 - only link at full duplex
- *
- * Default Value: 0
- */
-E1000_PARAM(Duplex, "Duplex setting");
-
-/* Auto-negotiation Advertisement Override
- *
- * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
- *
- * The AutoNeg value is a bit mask describing which speed and duplex
- * combinations should be advertised during auto-negotiation.
- * The supported speed and duplex modes are listed below
- *
- * Bit 7 6 5 4 3 2 1 0
- * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
- * Duplex Full Full Half Full Half
- *
- * Default Value: 0x2F (copper); 0x20 (fiber)
- */
-E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
-#define AUTONEG_ADV_DEFAULT 0x2F
-#define AUTONEG_ADV_MASK 0x2F
-
-/* User Specified Flow Control Override
- *
- * Valid Range: 0-3
- * - 0 - No Flow Control
- * - 1 - Rx only, respond to PAUSE frames but do not generate them
- * - 2 - Tx only, generate PAUSE frames but ignore them on receive
- * - 3 - Full Flow Control Support
- *
- * Default Value: Read flow control settings from the EEPROM
- */
-E1000_PARAM(FlowControl, "Flow Control setting");
-#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
-
-/* XsumRX - Receive Checksum Offload Enable/Disable
- *
- * Valid Range: 0, 1
- * - 0 - disables all checksum offload
- * - 1 - enables receive IP/TCP/UDP checksum offload
- * on 82543 and newer -based NICs
- *
- * Default Value: 1
- */
-E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
-
-/* Transmit Interrupt Delay in units of 1.024 microseconds
- * Tx interrupt delay needs to typically be set to something non zero
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
-#define DEFAULT_TIDV 8
-#define MAX_TXDELAY 0xFFFF
-#define MIN_TXDELAY 0
-
-/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
-#define DEFAULT_TADV 32
-#define MAX_TXABSDELAY 0xFFFF
-#define MIN_TXABSDELAY 0
-
-/* Receive Interrupt Delay in units of 1.024 microseconds
- * hardware will likely hang if you set this to anything but zero.
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
-#define DEFAULT_RDTR 0
-#define MAX_RXDELAY 0xFFFF
-#define MIN_RXDELAY 0
-
-/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
-#define DEFAULT_RADV 8
-#define MAX_RXABSDELAY 0xFFFF
-#define MIN_RXABSDELAY 0
-
-/* Interrupt Throttle Rate (interrupts/sec)
- *
- * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
- */
-E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
-#define DEFAULT_ITR 3
-#define MAX_ITR 100000
-#define MIN_ITR 100
-
-/* Enable Smart Power Down of the PHY
- *
- * Valid Range: 0, 1
- *
- * Default Value: 0 (disabled)
- */
-E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
-
-struct e1000_option {
- enum { enable_option, range_option, list_option } type;
- const char *name;
- const char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- const struct e1000_opt_list { int i; char *str; } *p;
- } l;
- } arg;
-};
-
-static int __devinit e1000_validate_option(unsigned int *value,
- const struct e1000_option *opt,
- struct e1000_adapter *adapter)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- e_dev_info("%s Enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- e_dev_info("%s Disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- e_dev_info("%s set to %i\n", opt->name, *value);
- return 0;
- }
- break;
- case list_option: {
- int i;
- const struct e1000_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- e_dev_info("%s\n", ent->str);
- return 0;
- }
- }
- }
- break;
- default:
- BUG();
- }
-
- e_dev_info("Invalid %s value specified (%i) %s\n",
- opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-static void e1000_check_fiber_options(struct e1000_adapter *adapter);
-static void e1000_check_copper_options(struct e1000_adapter *adapter);
-
-/**
- * e1000_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- **/
-
-void __devinit e1000_check_options(struct e1000_adapter *adapter)
-{
- struct e1000_option opt;
- int bd = adapter->bd_number;
-
- if (bd >= E1000_MAX_NIC) {
- e_dev_warn("Warning: no configuration for board #%i "
- "using defaults for all values\n", bd);
- }
-
- { /* Transmit Descriptor Count */
- struct e1000_tx_ring *tx_ring = adapter->tx_ring;
- int i;
- e1000_mac_type mac_type = adapter->hw.mac_type;
-
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Transmit Descriptors",
- .err = "using default of "
- __MODULE_STRING(E1000_DEFAULT_TXD),
- .def = E1000_DEFAULT_TXD,
- .arg = { .r = {
- .min = E1000_MIN_TXD,
- .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
- }}
- };
-
- if (num_TxDescriptors > bd) {
- tx_ring->count = TxDescriptors[bd];
- e1000_validate_option(&tx_ring->count, &opt, adapter);
- tx_ring->count = ALIGN(tx_ring->count,
- REQ_TX_DESCRIPTOR_MULTIPLE);
- } else {
- tx_ring->count = opt.def;
- }
- for (i = 0; i < adapter->num_tx_queues; i++)
- tx_ring[i].count = tx_ring->count;
- }
- { /* Receive Descriptor Count */
- struct e1000_rx_ring *rx_ring = adapter->rx_ring;
- int i;
- e1000_mac_type mac_type = adapter->hw.mac_type;
-
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Receive Descriptors",
- .err = "using default of "
- __MODULE_STRING(E1000_DEFAULT_RXD),
- .def = E1000_DEFAULT_RXD,
- .arg = { .r = {
- .min = E1000_MIN_RXD,
- .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
- }}
- };
-
- if (num_RxDescriptors > bd) {
- rx_ring->count = RxDescriptors[bd];
- e1000_validate_option(&rx_ring->count, &opt, adapter);
- rx_ring->count = ALIGN(rx_ring->count,
- REQ_RX_DESCRIPTOR_MULTIPLE);
- } else {
- rx_ring->count = opt.def;
- }
- for (i = 0; i < adapter->num_rx_queues; i++)
- rx_ring[i].count = rx_ring->count;
- }
- { /* Checksum Offload Enable/Disable */
- opt = (struct e1000_option) {
- .type = enable_option,
- .name = "Checksum Offload",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_XsumRX > bd) {
- unsigned int rx_csum = XsumRX[bd];
- e1000_validate_option(&rx_csum, &opt, adapter);
- adapter->rx_csum = rx_csum;
- } else {
- adapter->rx_csum = opt.def;
- }
- }
- { /* Flow Control */
-
- static const struct e1000_opt_list fc_list[] = {
- { E1000_FC_NONE, "Flow Control Disabled" },
- { E1000_FC_RX_PAUSE, "Flow Control Receive Only" },
- { E1000_FC_TX_PAUSE, "Flow Control Transmit Only" },
- { E1000_FC_FULL, "Flow Control Enabled" },
- { E1000_FC_DEFAULT, "Flow Control Hardware Default" }
- };
-
- opt = (struct e1000_option) {
- .type = list_option,
- .name = "Flow Control",
- .err = "reading default settings from EEPROM",
- .def = E1000_FC_DEFAULT,
- .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
- .p = fc_list }}
- };
-
- if (num_FlowControl > bd) {
- unsigned int fc = FlowControl[bd];
- e1000_validate_option(&fc, &opt, adapter);
- adapter->hw.fc = adapter->hw.original_fc = fc;
- } else {
- adapter->hw.fc = adapter->hw.original_fc = opt.def;
- }
- }
- { /* Transmit Interrupt Delay */
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Transmit Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
- .def = DEFAULT_TIDV,
- .arg = { .r = { .min = MIN_TXDELAY,
- .max = MAX_TXDELAY }}
- };
-
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_int_delay = opt.def;
- }
- }
- { /* Transmit Absolute Interrupt Delay */
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Transmit Absolute Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
- .def = DEFAULT_TADV,
- .arg = { .r = { .min = MIN_TXABSDELAY,
- .max = MAX_TXABSDELAY }}
- };
-
- if (num_TxAbsIntDelay > bd) {
- adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_abs_int_delay = opt.def;
- }
- }
- { /* Receive Interrupt Delay */
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Receive Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
- .def = DEFAULT_RDTR,
- .arg = { .r = { .min = MIN_RXDELAY,
- .max = MAX_RXDELAY }}
- };
-
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_int_delay = opt.def;
- }
- }
- { /* Receive Absolute Interrupt Delay */
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Receive Absolute Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
- .def = DEFAULT_RADV,
- .arg = { .r = { .min = MIN_RXABSDELAY,
- .max = MAX_RXABSDELAY }}
- };
-
- if (num_RxAbsIntDelay > bd) {
- adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_abs_int_delay = opt.def;
- }
- }
- { /* Interrupt Throttling Rate */
- opt = (struct e1000_option) {
- .type = range_option,
- .name = "Interrupt Throttling Rate (ints/sec)",
- .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
- .def = DEFAULT_ITR,
- .arg = { .r = { .min = MIN_ITR,
- .max = MAX_ITR }}
- };
-
- if (num_InterruptThrottleRate > bd) {
- adapter->itr = InterruptThrottleRate[bd];
- switch (adapter->itr) {
- case 0:
- e_dev_info("%s turned off\n", opt.name);
- break;
- case 1:
- e_dev_info("%s set to dynamic mode\n",
- opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 3:
- e_dev_info("%s set to dynamic conservative "
- "mode\n", opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 4:
- e_dev_info("%s set to simplified "
- "(2000-8000) ints mode\n", opt.name);
- adapter->itr_setting = adapter->itr;
- break;
- default:
- e1000_validate_option(&adapter->itr, &opt,
- adapter);
- /* save the setting, because the dynamic bits
- * change itr.
- * clear the lower two bits because they are
- * used as control */
- adapter->itr_setting = adapter->itr & ~3;
- break;
- }
- } else {
- adapter->itr_setting = opt.def;
- adapter->itr = 20000;
- }
- }
- { /* Smart Power Down */
- opt = (struct e1000_option) {
- .type = enable_option,
- .name = "PHY Smart Power Down",
- .err = "defaulting to Disabled",
- .def = OPTION_DISABLED
- };
-
- if (num_SmartPowerDownEnable > bd) {
- unsigned int spd = SmartPowerDownEnable[bd];
- e1000_validate_option(&spd, &opt, adapter);
- adapter->smart_power_down = spd;
- } else {
- adapter->smart_power_down = opt.def;
- }
- }
-
- switch (adapter->hw.media_type) {
- case e1000_media_type_fiber:
- case e1000_media_type_internal_serdes:
- e1000_check_fiber_options(adapter);
- break;
- case e1000_media_type_copper:
- e1000_check_copper_options(adapter);
- break;
- default:
- BUG();
- }
-}
-
-/**
- * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
- * @adapter: board private structure
- *
- * Handles speed and duplex options on fiber adapters
- **/
-
-static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
-{
- int bd = adapter->bd_number;
- if (num_Speed > bd) {
- e_dev_info("Speed not valid for fiber adapters, parameter "
- "ignored\n");
- }
-
- if (num_Duplex > bd) {
- e_dev_info("Duplex not valid for fiber adapters, parameter "
- "ignored\n");
- }
-
- if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
- e_dev_info("AutoNeg other than 1000/Full is not valid for fiber"
- "adapters, parameter ignored\n");
- }
-}
-
-/**
- * e1000_check_copper_options - Range Checking for Link Options, Copper Version
- * @adapter: board private structure
- *
- * Handles speed and duplex options on copper adapters
- **/
-
-static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
-{
- struct e1000_option opt;
- unsigned int speed, dplx, an;
- int bd = adapter->bd_number;
-
- { /* Speed */
- static const struct e1000_opt_list speed_list[] = {
- { 0, "" },
- { SPEED_10, "" },
- { SPEED_100, "" },
- { SPEED_1000, "" }};
-
- opt = (struct e1000_option) {
- .type = list_option,
- .name = "Speed",
- .err = "parameter ignored",
- .def = 0,
- .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
- .p = speed_list }}
- };
-
- if (num_Speed > bd) {
- speed = Speed[bd];
- e1000_validate_option(&speed, &opt, adapter);
- } else {
- speed = opt.def;
- }
- }
- { /* Duplex */
- static const struct e1000_opt_list dplx_list[] = {
- { 0, "" },
- { HALF_DUPLEX, "" },
- { FULL_DUPLEX, "" }};
-
- opt = (struct e1000_option) {
- .type = list_option,
- .name = "Duplex",
- .err = "parameter ignored",
- .def = 0,
- .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
- .p = dplx_list }}
- };
-
- if (num_Duplex > bd) {
- dplx = Duplex[bd];
- e1000_validate_option(&dplx, &opt, adapter);
- } else {
- dplx = opt.def;
- }
- }
-
- if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
- e_dev_info("AutoNeg specified along with Speed or Duplex, "
- "parameter ignored\n");
- adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
- } else { /* Autoneg */
- static const struct e1000_opt_list an_list[] =
- #define AA "AutoNeg advertising "
- {{ 0x01, AA "10/HD" },
- { 0x02, AA "10/FD" },
- { 0x03, AA "10/FD, 10/HD" },
- { 0x04, AA "100/HD" },
- { 0x05, AA "100/HD, 10/HD" },
- { 0x06, AA "100/HD, 10/FD" },
- { 0x07, AA "100/HD, 10/FD, 10/HD" },
- { 0x08, AA "100/FD" },
- { 0x09, AA "100/FD, 10/HD" },
- { 0x0a, AA "100/FD, 10/FD" },
- { 0x0b, AA "100/FD, 10/FD, 10/HD" },
- { 0x0c, AA "100/FD, 100/HD" },
- { 0x0d, AA "100/FD, 100/HD, 10/HD" },
- { 0x0e, AA "100/FD, 100/HD, 10/FD" },
- { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
- { 0x20, AA "1000/FD" },
- { 0x21, AA "1000/FD, 10/HD" },
- { 0x22, AA "1000/FD, 10/FD" },
- { 0x23, AA "1000/FD, 10/FD, 10/HD" },
- { 0x24, AA "1000/FD, 100/HD" },
- { 0x25, AA "1000/FD, 100/HD, 10/HD" },
- { 0x26, AA "1000/FD, 100/HD, 10/FD" },
- { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
- { 0x28, AA "1000/FD, 100/FD" },
- { 0x29, AA "1000/FD, 100/FD, 10/HD" },
- { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
- { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
- { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
- { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
- { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
- { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
-
- opt = (struct e1000_option) {
- .type = list_option,
- .name = "AutoNeg",
- .err = "parameter ignored",
- .def = AUTONEG_ADV_DEFAULT,
- .arg = { .l = { .nr = ARRAY_SIZE(an_list),
- .p = an_list }}
- };
-
- if (num_AutoNeg > bd) {
- an = AutoNeg[bd];
- e1000_validate_option(&an, &opt, adapter);
- } else {
- an = opt.def;
- }
- adapter->hw.autoneg_advertised = an;
- }
-
- switch (speed + dplx) {
- case 0:
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- if ((num_Speed > bd) && (speed != 0 || dplx != 0))
- e_dev_info("Speed and duplex autonegotiation "
- "enabled\n");
- break;
- case HALF_DUPLEX:
- e_dev_info("Half Duplex specified without Speed\n");
- e_dev_info("Using Autonegotiation at Half Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
- ADVERTISE_100_HALF;
- break;
- case FULL_DUPLEX:
- e_dev_info("Full Duplex specified without Speed\n");
- e_dev_info("Using Autonegotiation at Full Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
- ADVERTISE_100_FULL |
- ADVERTISE_1000_FULL;
- break;
- case SPEED_10:
- e_dev_info("10 Mbps Speed specified without Duplex\n");
- e_dev_info("Using Autonegotiation at 10 Mbps only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
- ADVERTISE_10_FULL;
- break;
- case SPEED_10 + HALF_DUPLEX:
- e_dev_info("Forcing to 10 Mbps Half Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
- adapter->hw.forced_speed_duplex = e1000_10_half;
- adapter->hw.autoneg_advertised = 0;
- break;
- case SPEED_10 + FULL_DUPLEX:
- e_dev_info("Forcing to 10 Mbps Full Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
- adapter->hw.forced_speed_duplex = e1000_10_full;
- adapter->hw.autoneg_advertised = 0;
- break;
- case SPEED_100:
- e_dev_info("100 Mbps Speed specified without Duplex\n");
- e_dev_info("Using Autonegotiation at 100 Mbps only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
- ADVERTISE_100_FULL;
- break;
- case SPEED_100 + HALF_DUPLEX:
- e_dev_info("Forcing to 100 Mbps Half Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
- adapter->hw.forced_speed_duplex = e1000_100_half;
- adapter->hw.autoneg_advertised = 0;
- break;
- case SPEED_100 + FULL_DUPLEX:
- e_dev_info("Forcing to 100 Mbps Full Duplex\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 0;
- adapter->hw.forced_speed_duplex = e1000_100_full;
- adapter->hw.autoneg_advertised = 0;
- break;
- case SPEED_1000:
- e_dev_info("1000 Mbps Speed specified without Duplex\n");
- goto full_duplex_only;
- case SPEED_1000 + HALF_DUPLEX:
- e_dev_info("Half Duplex is not supported at 1000 Mbps\n");
- /* fall through */
- case SPEED_1000 + FULL_DUPLEX:
-full_duplex_only:
- e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex "
- "only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
- break;
- default:
- BUG();
- }
-
- /* Speed, AutoNeg and MDI/MDI-X must all play nice */
- if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
- e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. "
- "Setting MDI-X to a compatible value.\n");
- }
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/*
- * 82571EB Gigabit Ethernet Controller
- * 82571EB Gigabit Ethernet Controller (Copper)
- * 82571EB Gigabit Ethernet Controller (Fiber)
- * 82571EB Dual Port Gigabit Mezzanine Adapter
- * 82571EB Quad Port Gigabit Mezzanine Adapter
- * 82571PT Gigabit PT Quad Port Server ExpressModule
- * 82572EI Gigabit Ethernet Controller (Copper)
- * 82572EI Gigabit Ethernet Controller (Fiber)
- * 82572EI Gigabit Ethernet Controller
- * 82573V Gigabit Ethernet Controller (Copper)
- * 82573E Gigabit Ethernet Controller (Copper)
- * 82573L Gigabit Ethernet Controller
- * 82574L Gigabit Network Connection
- * 82583V Gigabit Network Connection
- */
-
-#include "e1000.h"
-
-#define ID_LED_RESERVED_F746 0xF746
-#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_OFF1_ON2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-
-#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
-#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */
-#define E1000_BASE1000T_STATUS 10
-#define E1000_IDLE_ERROR_COUNT_MASK 0xFF
-#define E1000_RECEIVE_ERROR_COUNTER 21
-#define E1000_RECEIVE_ERROR_MAX 0xFFFF
-
-#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
-
-static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
-static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
-static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
-static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
-static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
-static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
-static s32 e1000_setup_link_82571(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
-static void e1000_clear_vfta_82571(struct e1000_hw *hw);
-static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
-static s32 e1000_led_on_82574(struct e1000_hw *hw);
-static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
-static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
-static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
-static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
-static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
-static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
-static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
-
-/**
- * e1000_init_phy_params_82571 - Init PHY func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
-
- if (hw->phy.media_type != e1000_media_type_copper) {
- phy->type = e1000_phy_none;
- return 0;
- }
-
- phy->addr = 1;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
-
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_82571;
-
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- phy->type = e1000_phy_igp_2;
- break;
- case e1000_82573:
- phy->type = e1000_phy_m88;
- break;
- case e1000_82574:
- case e1000_82583:
- phy->type = e1000_phy_bm;
- phy->ops.acquire = e1000_get_hw_semaphore_82574;
- phy->ops.release = e1000_put_hw_semaphore_82574;
- phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
- phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
-
- /* This can only be done after all function pointers are setup. */
- ret_val = e1000_get_phy_id_82571(hw);
- if (ret_val) {
- e_dbg("Error getting PHY ID\n");
- return ret_val;
- }
-
- /* Verify phy id */
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- if (phy->id != IGP01E1000_I_PHY_ID)
- ret_val = -E1000_ERR_PHY;
- break;
- case e1000_82573:
- if (phy->id != M88E1111_I_PHY_ID)
- ret_val = -E1000_ERR_PHY;
- break;
- case e1000_82574:
- case e1000_82583:
- if (phy->id != BME1000_E_PHY_ID_R2)
- ret_val = -E1000_ERR_PHY;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- break;
- }
-
- if (ret_val)
- e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
-
- return ret_val;
-}
-
-/**
- * e1000_init_nvm_params_82571 - Init NVM func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u16 size;
-
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
- switch (nvm->override) {
- case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
- nvm->address_bits = 16;
- break;
- case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
- nvm->address_bits = 8;
- break;
- default:
- nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
- nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
- break;
- }
-
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- if (((eecd >> 15) & 0x3) == 0x3) {
- nvm->type = e1000_nvm_flash_hw;
- nvm->word_size = 2048;
- /*
- * Autonomous Flash update bit must be cleared due
- * to Flash update issue.
- */
- eecd &= ~E1000_EECD_AUPDEN;
- ew32(EECD, eecd);
- break;
- }
- /* Fall Through */
- default:
- nvm->type = e1000_nvm_eeprom_spi;
- size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
- /*
- * Added to a constant, "size" becomes the left-shift value
- * for setting word_size.
- */
- size += NVM_WORD_SIZE_BASE_SHIFT;
-
- /* EEPROM access above 16k is unsupported */
- if (size > 14)
- size = 14;
- nvm->word_size = 1 << size;
- break;
- }
-
- /* Function Pointers */
- switch (hw->mac.type) {
- case e1000_82574:
- case e1000_82583:
- nvm->ops.acquire = e1000_get_hw_semaphore_82574;
- nvm->ops.release = e1000_put_hw_semaphore_82574;
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000_init_mac_params_82571 - Init MAC func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_mac_operations *func = &mac->ops;
- u32 swsm = 0;
- u32 swsm2 = 0;
- bool force_clear_smbi = false;
-
- /* Set media type */
- switch (adapter->pdev->device) {
- case E1000_DEV_ID_82571EB_FIBER:
- case E1000_DEV_ID_82572EI_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- hw->phy.media_type = e1000_media_type_fiber;
- break;
- case E1000_DEV_ID_82571EB_SERDES:
- case E1000_DEV_ID_82572EI_SERDES:
- case E1000_DEV_ID_82571EB_SERDES_DUAL:
- case E1000_DEV_ID_82571EB_SERDES_QUAD:
- hw->phy.media_type = e1000_media_type_internal_serdes;
- break;
- default:
- hw->phy.media_type = e1000_media_type_copper;
- break;
- }
-
- /* Set mta register count */
- mac->mta_reg_count = 128;
- /* Set rar entry count */
- mac->rar_entry_count = E1000_RAR_ENTRIES;
- /* Adaptive IFS supported */
- mac->adaptive_ifs = true;
-
- /* check for link */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_82571;
- func->check_for_link = e1000e_check_for_copper_link;
- func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
- break;
- case e1000_media_type_fiber:
- func->setup_physical_interface =
- e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000e_check_for_fiber_link;
- func->get_link_up_info =
- e1000e_get_speed_and_duplex_fiber_serdes;
- break;
- case e1000_media_type_internal_serdes:
- func->setup_physical_interface =
- e1000_setup_fiber_serdes_link_82571;
- func->check_for_link = e1000_check_for_serdes_link_82571;
- func->get_link_up_info =
- e1000e_get_speed_and_duplex_fiber_serdes;
- break;
- default:
- return -E1000_ERR_CONFIG;
- break;
- }
-
- switch (hw->mac.type) {
- case e1000_82573:
- func->set_lan_id = e1000_set_lan_id_single_port;
- func->check_mng_mode = e1000e_check_mng_mode_generic;
- func->led_on = e1000e_led_on_generic;
- func->blink_led = e1000e_blink_led_generic;
-
- /* FWSM register */
- mac->has_fwsm = true;
- /*
- * ARC supported; valid only if manageability features are
- * enabled.
- */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
- break;
- case e1000_82574:
- case e1000_82583:
- func->set_lan_id = e1000_set_lan_id_single_port;
- func->check_mng_mode = e1000_check_mng_mode_82574;
- func->led_on = e1000_led_on_82574;
- break;
- default:
- func->check_mng_mode = e1000e_check_mng_mode_generic;
- func->led_on = e1000e_led_on_generic;
- func->blink_led = e1000e_blink_led_generic;
-
- /* FWSM register */
- mac->has_fwsm = true;
- break;
- }
-
- /*
- * Ensure that the inter-port SWSM.SMBI lock bit is clear before
- * first NVM or PHY access. This should be done for single-port
- * devices, and for one port only on dual-port devices so that
- * for those devices we can still use the SMBI lock to synchronize
- * inter-port accesses to the PHY & NVM.
- */
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- swsm2 = er32(SWSM2);
-
- if (!(swsm2 & E1000_SWSM2_LOCK)) {
- /* Only do this for the first interface on this card */
- ew32(SWSM2,
- swsm2 | E1000_SWSM2_LOCK);
- force_clear_smbi = true;
- } else
- force_clear_smbi = false;
- break;
- default:
- force_clear_smbi = true;
- break;
- }
-
- if (force_clear_smbi) {
- /* Make sure SWSM.SMBI is clear */
- swsm = er32(SWSM);
- if (swsm & E1000_SWSM_SMBI) {
- /* This bit should not be set on a first interface, and
- * indicates that the bootagent or EFI code has
- * improperly left this bit enabled
- */
- e_dbg("Please update your 82571 Bootagent\n");
- }
- ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
- }
-
- /*
- * Initialize device specific counter of SMBI acquisition
- * timeouts.
- */
- hw->dev_spec.e82571.smb_counter = 0;
-
- return 0;
-}
-
-static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- static int global_quad_port_a; /* global port a indication */
- struct pci_dev *pdev = adapter->pdev;
- int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
- s32 rc;
-
- rc = e1000_init_mac_params_82571(adapter);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_82571(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_phy_params_82571(hw);
- if (rc)
- return rc;
-
- /* tag quad port adapters first, it's used below */
- switch (pdev->device) {
- case E1000_DEV_ID_82571EB_QUAD_COPPER:
- case E1000_DEV_ID_82571EB_QUAD_FIBER:
- case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
- case E1000_DEV_ID_82571PT_QUAD_COPPER:
- adapter->flags |= FLAG_IS_QUAD_PORT;
- /* mark the first port */
- if (global_quad_port_a == 0)
- adapter->flags |= FLAG_IS_QUAD_PORT_A;
- /* Reset for multiple quad port adapters */
- global_quad_port_a++;
- if (global_quad_port_a == 4)
- global_quad_port_a = 0;
- break;
- default:
- break;
- }
-
- switch (adapter->hw.mac.type) {
- case e1000_82571:
- /* these dual ports don't have WoL on port B at all */
- if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
- (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
- (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
- (is_port_b))
- adapter->flags &= ~FLAG_HAS_WOL;
- /* quad ports only support WoL on port A */
- if (adapter->flags & FLAG_IS_QUAD_PORT &&
- (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
- adapter->flags &= ~FLAG_HAS_WOL;
- /* Does not support WoL on any port */
- if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
- adapter->flags &= ~FLAG_HAS_WOL;
- break;
- case e1000_82573:
- if (pdev->device == E1000_DEV_ID_82573L) {
- adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = DEFAULT_JUMBO;
- }
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
- * @hw: pointer to the HW structure
- *
- * Reads the PHY registers and stores the PHY ID and possibly the PHY
- * revision in the hardware structure.
- **/
-static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_id = 0;
-
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- /*
- * The 82571 firmware may still be configuring the PHY.
- * In this case, we cannot access the PHY until the
- * configuration is done. So we explicitly set the
- * PHY ID.
- */
- phy->id = IGP01E1000_I_PHY_ID;
- break;
- case e1000_82573:
- return e1000e_get_phy_id(hw);
- break;
- case e1000_82574:
- case e1000_82583:
- ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
- if (ret_val)
- return ret_val;
-
- phy->id = (u32)(phy_id << 16);
- udelay(20);
- ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
- if (ret_val)
- return ret_val;
-
- phy->id |= (u32)(phy_id);
- phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore to access the PHY or NVM
- **/
-static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
-{
- u32 swsm;
- s32 sw_timeout = hw->nvm.word_size + 1;
- s32 fw_timeout = hw->nvm.word_size + 1;
- s32 i = 0;
-
- /*
- * If we have timedout 3 times on trying to acquire
- * the inter-port SMBI semaphore, there is old code
- * operating on the other port, and it is not
- * releasing SMBI. Modify the number of times that
- * we try for the semaphore to interwork with this
- * older code.
- */
- if (hw->dev_spec.e82571.smb_counter > 2)
- sw_timeout = 1;
-
- /* Get the SW semaphore */
- while (i < sw_timeout) {
- swsm = er32(SWSM);
- if (!(swsm & E1000_SWSM_SMBI))
- break;
-
- udelay(50);
- i++;
- }
-
- if (i == sw_timeout) {
- e_dbg("Driver can't access device - SMBI bit is set.\n");
- hw->dev_spec.e82571.smb_counter++;
- }
- /* Get the FW semaphore. */
- for (i = 0; i < fw_timeout; i++) {
- swsm = er32(SWSM);
- ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
-
- /* Semaphore acquired if bit latched */
- if (er32(SWSM) & E1000_SWSM_SWESMBI)
- break;
-
- udelay(50);
- }
-
- if (i == fw_timeout) {
- /* Release semaphores */
- e1000_put_hw_semaphore_82571(hw);
- e_dbg("Driver can't access the NVM\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000_put_hw_semaphore_82571 - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used to access the PHY or NVM
- **/
-static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
-{
- u32 swsm;
-
- swsm = er32(SWSM);
- swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
- ew32(SWSM, swsm);
-}
-/**
- * e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore during reset.
- *
- **/
-static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
-{
- u32 extcnf_ctrl;
- s32 ret_val = 0;
- s32 i = 0;
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
- extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
- do {
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- extcnf_ctrl = er32(EXTCNF_CTRL);
-
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
- break;
-
- extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
-
- usleep_range(2000, 4000);
- i++;
- } while (i < MDIO_OWNERSHIP_TIMEOUT);
-
- if (i == MDIO_OWNERSHIP_TIMEOUT) {
- /* Release semaphores */
- e1000_put_hw_semaphore_82573(hw);
- e_dbg("Driver can't access the PHY\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_put_hw_semaphore_82573 - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used during reset.
- *
- **/
-static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
-{
- u32 extcnf_ctrl;
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
- extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
-}
-
-static DEFINE_MUTEX(swflag_mutex);
-
-/**
- * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore to access the PHY or NVM.
- *
- **/
-static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- mutex_lock(&swflag_mutex);
- ret_val = e1000_get_hw_semaphore_82573(hw);
- if (ret_val)
- mutex_unlock(&swflag_mutex);
- return ret_val;
-}
-
-/**
- * e1000_put_hw_semaphore_82574 - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used to access the PHY or NVM
- *
- **/
-static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
-{
- e1000_put_hw_semaphore_82573(hw);
- mutex_unlock(&swflag_mutex);
-}
-
-/**
- * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU D0 state according to the active flag.
- * LPLU will not be activated unless the
- * device autonegotiation advertisement meets standards of
- * either 10 or 10/100 or 10/100/1000 at all duplexes.
- * This is a function pointer entry point only called by
- * PHY setup routines.
- **/
-static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
-{
- u16 data = er32(POEMB);
-
- if (active)
- data |= E1000_PHY_CTRL_D0A_LPLU;
- else
- data &= ~E1000_PHY_CTRL_D0A_LPLU;
-
- ew32(POEMB, data);
- return 0;
-}
-
-/**
- * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
- * @hw: pointer to the HW structure
- * @active: boolean used to enable/disable lplu
- *
- * The low power link up (lplu) state is set to the power management level D3
- * when active is true, else clear lplu for D3. LPLU
- * is used during Dx states where the power conservation is most important.
- * During driver activity, SmartSpeed should be enabled so performance is
- * maintained.
- **/
-static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
-{
- u16 data = er32(POEMB);
-
- if (!active) {
- data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
- } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
- (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
- (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
- data |= E1000_PHY_CTRL_NOND0A_LPLU;
- }
-
- ew32(POEMB, data);
- return 0;
-}
-
-/**
- * e1000_acquire_nvm_82571 - Request for access to the EEPROM
- * @hw: pointer to the HW structure
- *
- * To gain access to the EEPROM, first we must obtain a hardware semaphore.
- * Then for non-82573 hardware, set the EEPROM access request bit and wait
- * for EEPROM access grant bit. If the access grant bit is not set, release
- * hardware semaphore.
- **/
-static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- ret_val = e1000_get_hw_semaphore_82571(hw);
- if (ret_val)
- return ret_val;
-
- switch (hw->mac.type) {
- case e1000_82573:
- break;
- default:
- ret_val = e1000e_acquire_nvm(hw);
- break;
- }
-
- if (ret_val)
- e1000_put_hw_semaphore_82571(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_release_nvm_82571 - Release exclusive access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-static void e1000_release_nvm_82571(struct e1000_hw *hw)
-{
- e1000e_release_nvm(hw);
- e1000_put_hw_semaphore_82571(hw);
-}
-
-/**
- * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
- * @hw: pointer to the HW structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * For non-82573 silicon, write data to EEPROM at offset using SPI interface.
- *
- * If e1000e_update_nvm_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- **/
-static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- s32 ret_val;
-
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
- break;
- case e1000_82571:
- case e1000_82572:
- ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
- break;
- default:
- ret_val = -E1000_ERR_NVM;
- break;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_update_nvm_checksum_82571 - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM checksum by reading/adding each word of the EEPROM
- * up to the checksum. Then calculates the EEPROM checksum and writes the
- * value to the EEPROM.
- **/
-static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
-{
- u32 eecd;
- s32 ret_val;
- u16 i;
-
- ret_val = e1000e_update_nvm_checksum_generic(hw);
- if (ret_val)
- return ret_val;
-
- /*
- * If our nvm is an EEPROM, then we're done
- * otherwise, commit the checksum to the flash NVM.
- */
- if (hw->nvm.type != e1000_nvm_flash_hw)
- return ret_val;
-
- /* Check for pending operations. */
- for (i = 0; i < E1000_FLASH_UPDATES; i++) {
- usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
- break;
- }
-
- if (i == E1000_FLASH_UPDATES)
- return -E1000_ERR_NVM;
-
- /* Reset the firmware if using STM opcode. */
- if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
- /*
- * The enabling of and the actual reset must be done
- * in two write cycles.
- */
- ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
- e1e_flush();
- ew32(HICR, E1000_HICR_FW_RESET);
- }
-
- /* Commit the write to flash */
- eecd = er32(EECD) | E1000_EECD_FLUPD;
- ew32(EECD, eecd);
-
- for (i = 0; i < E1000_FLASH_UPDATES; i++) {
- usleep_range(1000, 2000);
- if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
- break;
- }
-
- if (i == E1000_FLASH_UPDATES)
- return -E1000_ERR_NVM;
-
- return 0;
-}
-
-/**
- * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- * and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
-{
- if (hw->nvm.type == e1000_nvm_flash_hw)
- e1000_fix_nvm_checksum_82571(hw);
-
- return e1000e_validate_nvm_checksum_generic(hw);
-}
-
-/**
- * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
- * @hw: pointer to the HW structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * After checking for invalid values, poll the EEPROM to ensure the previous
- * command has completed before trying to write the next word. After write
- * poll for completion.
- *
- * If e1000e_update_nvm_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- **/
-static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i, eewr = 0;
- s32 ret_val = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- for (i = 0; i < words; i++) {
- eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
- ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
- E1000_NVM_RW_REG_START;
-
- ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
- if (ret_val)
- break;
-
- ew32(EEWR, eewr);
-
- ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
- if (ret_val)
- break;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_get_cfg_done_82571 - Poll for configuration done
- * @hw: pointer to the HW structure
- *
- * Reads the management control register for the config done bit to be set.
- **/
-static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
-{
- s32 timeout = PHY_CFG_TIMEOUT;
-
- while (timeout) {
- if (er32(EEMNGCTL) &
- E1000_NVM_CFG_DONE_PORT_0)
- break;
- usleep_range(1000, 2000);
- timeout--;
- }
- if (!timeout) {
- e_dbg("MNG configuration cycle has not completed.\n");
- return -E1000_ERR_RESET;
- }
-
- return 0;
-}
-
-/**
- * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU D0 state according to the active flag. When activating LPLU
- * this function also disables smart speed and vice versa. LPLU will not be
- * activated unless the device autonegotiation advertisement meets standards
- * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function
- * pointer entry point only called by PHY setup routines.
- **/
-static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
- if (ret_val)
- return ret_val;
-
- if (active) {
- data |= IGP02E1000_PM_D0_LPLU;
- ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
- if (ret_val)
- return ret_val;
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
- if (ret_val)
- return ret_val;
- } else {
- data &= ~IGP02E1000_PM_D0_LPLU;
- ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000_reset_hw_82571 - Reset hardware
- * @hw: pointer to the HW structure
- *
- * This resets the hardware into a known state.
- **/
-static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
-{
- u32 ctrl, ctrl_ext;
- s32 ret_val;
-
- /*
- * Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- ret_val = e1000e_disable_pcie_master(hw);
- if (ret_val)
- e_dbg("PCI-E Master disable polling has failed.\n");
-
- e_dbg("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
- e1e_flush();
-
- usleep_range(10000, 20000);
-
- /*
- * Must acquire the MDIO ownership before MAC reset.
- * Ownership defaults to firmware after a reset.
- */
- switch (hw->mac.type) {
- case e1000_82573:
- ret_val = e1000_get_hw_semaphore_82573(hw);
- break;
- case e1000_82574:
- case e1000_82583:
- ret_val = e1000_get_hw_semaphore_82574(hw);
- break;
- default:
- break;
- }
- if (ret_val)
- e_dbg("Cannot acquire MDIO ownership\n");
-
- ctrl = er32(CTRL);
-
- e_dbg("Issuing a global reset to MAC\n");
- ew32(CTRL, ctrl | E1000_CTRL_RST);
-
- /* Must release MDIO ownership and mutex after MAC reset. */
- switch (hw->mac.type) {
- case e1000_82574:
- case e1000_82583:
- e1000_put_hw_semaphore_82574(hw);
- break;
- default:
- break;
- }
-
- if (hw->nvm.type == e1000_nvm_flash_hw) {
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
- }
-
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val)
- /* We don't want to continue accessing MAC registers. */
- return ret_val;
-
- /*
- * Phy configuration from NVM just starts after EECD_AUTO_RD is set.
- * Need to wait for Phy configuration completion before accessing
- * NVM and Phy.
- */
-
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- msleep(25);
- break;
- default:
- break;
- }
-
- /* Clear any pending interrupt events. */
- ew32(IMC, 0xffffffff);
- er32(ICR);
-
- if (hw->mac.type == e1000_82571) {
- /* Install any alternate MAC address into RAR0 */
- ret_val = e1000_check_alt_mac_addr_generic(hw);
- if (ret_val)
- return ret_val;
-
- e1000e_set_laa_state_82571(hw, true);
- }
-
- /* Reinitialize the 82571 serdes link state machine */
- if (hw->phy.media_type == e1000_media_type_internal_serdes)
- hw->mac.serdes_link_state = e1000_serdes_link_down;
-
- return 0;
-}
-
-/**
- * e1000_init_hw_82571 - Initialize hardware
- * @hw: pointer to the HW structure
- *
- * This inits the hardware readying it for operation.
- **/
-static s32 e1000_init_hw_82571(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 reg_data;
- s32 ret_val;
- u16 i, rar_count = mac->rar_entry_count;
-
- e1000_initialize_hw_bits_82571(hw);
-
- /* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
- if (ret_val)
- e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
-
- /* Disabling VLAN filtering */
- e_dbg("Initializing the IEEE VLAN\n");
- mac->ops.clear_vfta(hw);
-
- /* Setup the receive address. */
- /*
- * If, however, a locally administered address was assigned to the
- * 82571, we must reserve a RAR for it to work around an issue where
- * resetting one port will reload the MAC on the other port.
- */
- if (e1000e_get_laa_state_82571(hw))
- rar_count--;
- e1000e_init_rx_addrs(hw, rar_count);
-
- /* Zero out the Multicast HASH table */
- e_dbg("Zeroing the MTA\n");
- for (i = 0; i < mac->mta_reg_count; i++)
- E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-
- /* Setup link and flow control */
- ret_val = e1000_setup_link_82571(hw);
-
- /* Set the transmit descriptor write-back policy */
- reg_data = er32(TXDCTL(0));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL(0), reg_data);
-
- /* ...for both queues. */
- switch (mac->type) {
- case e1000_82573:
- e1000e_enable_tx_pkt_filtering(hw);
- /* fall through */
- case e1000_82574:
- case e1000_82583:
- reg_data = er32(GCR);
- reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
- ew32(GCR, reg_data);
- break;
- default:
- reg_data = er32(TXDCTL(1));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB |
- E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL(1), reg_data);
- break;
- }
-
- /*
- * Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- e1000_clear_hw_cntrs_82571(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
- * @hw: pointer to the HW structure
- *
- * Initializes required hardware-dependent bits needed for normal operation.
- **/
-static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
-{
- u32 reg;
-
- /* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL(0));
- reg |= (1 << 22);
- ew32(TXDCTL(0), reg);
-
- /* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL(1));
- reg |= (1 << 22);
- ew32(TXDCTL(1), reg);
-
- /* Transmit Arbitration Control 0 */
- reg = er32(TARC(0));
- reg &= ~(0xF << 27); /* 30:27 */
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
- break;
- default:
- break;
- }
- ew32(TARC(0), reg);
-
- /* Transmit Arbitration Control 1 */
- reg = er32(TARC(1));
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- reg &= ~((1 << 29) | (1 << 30));
- reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
- if (er32(TCTL) & E1000_TCTL_MULR)
- reg &= ~(1 << 28);
- else
- reg |= (1 << 28);
- ew32(TARC(1), reg);
- break;
- default:
- break;
- }
-
- /* Device Control */
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- reg = er32(CTRL);
- reg &= ~(1 << 29);
- ew32(CTRL, reg);
- break;
- default:
- break;
- }
-
- /* Extended Device Control */
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- reg = er32(CTRL_EXT);
- reg &= ~(1 << 23);
- reg |= (1 << 22);
- ew32(CTRL_EXT, reg);
- break;
- default:
- break;
- }
-
- if (hw->mac.type == e1000_82571) {
- reg = er32(PBA_ECC);
- reg |= E1000_PBA_ECC_CORR_EN;
- ew32(PBA_ECC, reg);
- }
- /*
- * Workaround for hardware errata.
- * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
- */
-
- if ((hw->mac.type == e1000_82571) ||
- (hw->mac.type == e1000_82572)) {
- reg = er32(CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
- ew32(CTRL_EXT, reg);
- }
-
-
- /* PCI-Ex Control Registers */
- switch (hw->mac.type) {
- case e1000_82574:
- case e1000_82583:
- reg = er32(GCR);
- reg |= (1 << 22);
- ew32(GCR, reg);
-
- /*
- * Workaround for hardware errata.
- * apply workaround for hardware errata documented in errata
- * docs Fixes issue where some error prone or unreliable PCIe
- * completions are occurring, particularly with ASPM enabled.
- * Without fix, issue can cause Tx timeouts.
- */
- reg = er32(GCR2);
- reg |= 1;
- ew32(GCR2, reg);
- break;
- default:
- break;
- }
-}
-
-/**
- * e1000_clear_vfta_82571 - Clear VLAN filter table
- * @hw: pointer to the HW structure
- *
- * Clears the register array which contains the VLAN filter table by
- * setting all the values to 0.
- **/
-static void e1000_clear_vfta_82571(struct e1000_hw *hw)
-{
- u32 offset;
- u32 vfta_value = 0;
- u32 vfta_offset = 0;
- u32 vfta_bit_in_reg = 0;
-
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- if (hw->mng_cookie.vlan_id != 0) {
- /*
- * The VFTA is a 4096b bit-field, each identifying
- * a single VLAN ID. The following operations
- * determine which 32b entry (i.e. offset) into the
- * array we want to set the VLAN ID (i.e. bit) of
- * the manageability unit.
- */
- vfta_offset = (hw->mng_cookie.vlan_id >>
- E1000_VFTA_ENTRY_SHIFT) &
- E1000_VFTA_ENTRY_MASK;
- vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
- E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
- }
- break;
- default:
- break;
- }
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- /*
- * If the offset we want to clear is the same offset of the
- * manageability VLAN ID, then clear all bits except that of
- * the manageability unit.
- */
- vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
- E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
- e1e_flush();
- }
-}
-
-/**
- * e1000_check_mng_mode_82574 - Check manageability is enabled
- * @hw: pointer to the HW structure
- *
- * Reads the NVM Initialization Control Word 2 and returns true
- * (>0) if any manageability is enabled, else false (0).
- **/
-static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
-{
- u16 data;
-
- e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
- return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
-}
-
-/**
- * e1000_led_on_82574 - Turn LED on
- * @hw: pointer to the HW structure
- *
- * Turn LED on.
- **/
-static s32 e1000_led_on_82574(struct e1000_hw *hw)
-{
- u32 ctrl;
- u32 i;
-
- ctrl = hw->mac.ledctl_mode2;
- if (!(E1000_STATUS_LU & er32(STATUS))) {
- /*
- * If no link, then turn LED on by setting the invert bit
- * for each LED that's "on" (0x0E) in ledctl_mode2.
- */
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
- }
- ew32(LEDCTL, ctrl);
-
- return 0;
-}
-
-/**
- * e1000_check_phy_82574 - check 82574 phy hung state
- * @hw: pointer to the HW structure
- *
- * Returns whether phy is hung or not
- **/
-bool e1000_check_phy_82574(struct e1000_hw *hw)
-{
- u16 status_1kbt = 0;
- u16 receive_errors = 0;
- bool phy_hung = false;
- s32 ret_val = 0;
-
- /*
- * Read PHY Receive Error counter first, if its is max - all F's then
- * read the Base1000T status register If both are max then PHY is hung.
- */
- ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
-
- if (ret_val)
- goto out;
- if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
- ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
- if (ret_val)
- goto out;
- if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
- E1000_IDLE_ERROR_COUNT_MASK)
- phy_hung = true;
- }
-out:
- return phy_hung;
-}
-
-/**
- * e1000_setup_link_82571 - Setup flow control and link settings
- * @hw: pointer to the HW structure
- *
- * Determines which flow control settings to use, then configures flow
- * control. Calls the appropriate media-specific link configuration
- * function. Assuming the adapter has a valid link partner, a valid link
- * should be established. Assumes the hardware has previously been reset
- * and the transmitter and receiver are not enabled.
- **/
-static s32 e1000_setup_link_82571(struct e1000_hw *hw)
-{
- /*
- * 82573 does not have a word in the NVM to determine
- * the default flow control setting, so we explicitly
- * set it to full.
- */
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- if (hw->fc.requested_mode == e1000_fc_default)
- hw->fc.requested_mode = e1000_fc_full;
- break;
- default:
- break;
- }
-
- return e1000e_setup_link(hw);
-}
-
-/**
- * e1000_setup_copper_link_82571 - Configure copper link settings
- * @hw: pointer to the HW structure
- *
- * Configures the link for auto-neg or forced speed and duplex. Then we check
- * for link, once link is established calls to configure collision distance
- * and flow control are called.
- **/
-static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ew32(CTRL, ctrl);
-
- switch (hw->phy.type) {
- case e1000_phy_m88:
- case e1000_phy_bm:
- ret_val = e1000e_copper_link_setup_m88(hw);
- break;
- case e1000_phy_igp_2:
- ret_val = e1000e_copper_link_setup_igp(hw);
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
-
- if (ret_val)
- return ret_val;
-
- ret_val = e1000e_setup_copper_link(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
- * @hw: pointer to the HW structure
- *
- * Configures collision distance and flow control for fiber and serdes links.
- * Upon successful setup, poll for link.
- **/
-static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
-{
- switch (hw->mac.type) {
- case e1000_82571:
- case e1000_82572:
- /*
- * If SerDes loopback mode is entered, there is no form
- * of reset to take the adapter out of that mode. So we
- * have to explicitly take the adapter out of loopback
- * mode. This prevents drivers from twiddling their thumbs
- * if another tool failed to take it out of loopback mode.
- */
- ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
- break;
- default:
- break;
- }
-
- return e1000e_setup_fiber_serdes_link(hw);
-}
-
-/**
- * e1000_check_for_serdes_link_82571 - Check for link (Serdes)
- * @hw: pointer to the HW structure
- *
- * Reports the link state as up or down.
- *
- * If autonegotiation is supported by the link partner, the link state is
- * determined by the result of autonegotiation. This is the most likely case.
- * If autonegotiation is not supported by the link partner, and the link
- * has a valid signal, force the link up.
- *
- * The link state is represented internally here by 4 states:
- *
- * 1) down
- * 2) autoneg_progress
- * 3) autoneg_complete (the link successfully autonegotiated)
- * 4) forced_up (the link has been forced up, it did not autonegotiate)
- *
- **/
-static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 rxcw;
- u32 ctrl;
- u32 status;
- u32 txcw;
- u32 i;
- s32 ret_val = 0;
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
- rxcw = er32(RXCW);
-
- if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
-
- /* Receiver is synchronized with no invalid bits. */
- switch (mac->serdes_link_state) {
- case e1000_serdes_link_autoneg_complete:
- if (!(status & E1000_STATUS_LU)) {
- /*
- * We have lost link, retry autoneg before
- * reporting link failure
- */
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_progress;
- mac->serdes_has_link = false;
- e_dbg("AN_UP -> AN_PROG\n");
- } else {
- mac->serdes_has_link = true;
- }
- break;
-
- case e1000_serdes_link_forced_up:
- /*
- * If we are receiving /C/ ordered sets, re-enable
- * auto-negotiation in the TXCW register and disable
- * forced link in the Device Control register in an
- * attempt to auto-negotiate with our link partner.
- * If the partner code word is null, stop forcing
- * and restart auto negotiation.
- */
- if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) {
- /* Enable autoneg, and unforce link up */
- ew32(TXCW, mac->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_progress;
- mac->serdes_has_link = false;
- e_dbg("FORCED_UP -> AN_PROG\n");
- } else {
- mac->serdes_has_link = true;
- }
- break;
-
- case e1000_serdes_link_autoneg_progress:
- if (rxcw & E1000_RXCW_C) {
- /*
- * We received /C/ ordered sets, meaning the
- * link partner has autonegotiated, and we can
- * trust the Link Up (LU) status bit.
- */
- if (status & E1000_STATUS_LU) {
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_complete;
- e_dbg("AN_PROG -> AN_UP\n");
- mac->serdes_has_link = true;
- } else {
- /* Autoneg completed, but failed. */
- mac->serdes_link_state =
- e1000_serdes_link_down;
- e_dbg("AN_PROG -> DOWN\n");
- }
- } else {
- /*
- * The link partner did not autoneg.
- * Force link up and full duplex, and change
- * state to forced.
- */
- ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* Configure Flow Control after link up. */
- ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error config flow control\n");
- break;
- }
- mac->serdes_link_state =
- e1000_serdes_link_forced_up;
- mac->serdes_has_link = true;
- e_dbg("AN_PROG -> FORCED_UP\n");
- }
- break;
-
- case e1000_serdes_link_down:
- default:
- /*
- * The link was down but the receiver has now gained
- * valid sync, so lets see if we can bring the link
- * up.
- */
- ew32(TXCW, mac->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_progress;
- mac->serdes_has_link = false;
- e_dbg("DOWN -> AN_PROG\n");
- break;
- }
- } else {
- if (!(rxcw & E1000_RXCW_SYNCH)) {
- mac->serdes_has_link = false;
- mac->serdes_link_state = e1000_serdes_link_down;
- e_dbg("ANYSTATE -> DOWN\n");
- } else {
- /*
- * Check several times, if Sync and Config
- * both are consistently 1 then simply ignore
- * the Invalid bit and restart Autoneg
- */
- for (i = 0; i < AN_RETRY_COUNT; i++) {
- udelay(10);
- rxcw = er32(RXCW);
- if ((rxcw & E1000_RXCW_IV) &&
- !((rxcw & E1000_RXCW_SYNCH) &&
- (rxcw & E1000_RXCW_C))) {
- mac->serdes_has_link = false;
- mac->serdes_link_state =
- e1000_serdes_link_down;
- e_dbg("ANYSTATE -> DOWN\n");
- break;
- }
- }
-
- if (i == AN_RETRY_COUNT) {
- txcw = er32(TXCW);
- txcw |= E1000_TXCW_ANE;
- ew32(TXCW, txcw);
- mac->serdes_link_state =
- e1000_serdes_link_autoneg_progress;
- mac->serdes_has_link = false;
- e_dbg("ANYSTATE -> AN_PROG\n");
- }
- }
- }
-
- return ret_val;
-}
-
-/**
- * e1000_valid_led_default_82571 - Verify a valid default LED config
- * @hw: pointer to the HW structure
- * @data: pointer to the NVM (EEPROM)
- *
- * Read the EEPROM for the current default LED configuration. If the
- * LED configuration is not valid, set to a valid LED configuration.
- **/
-static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
-{
- s32 ret_val;
-
- ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
-
- switch (hw->mac.type) {
- case e1000_82573:
- case e1000_82574:
- case e1000_82583:
- if (*data == ID_LED_RESERVED_F746)
- *data = ID_LED_DEFAULT_82573;
- break;
- default:
- if (*data == ID_LED_RESERVED_0000 ||
- *data == ID_LED_RESERVED_FFFF)
- *data = ID_LED_DEFAULT;
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000e_get_laa_state_82571 - Get locally administered address state
- * @hw: pointer to the HW structure
- *
- * Retrieve and return the current locally administered address state.
- **/
-bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
-{
- if (hw->mac.type != e1000_82571)
- return false;
-
- return hw->dev_spec.e82571.laa_is_present;
-}
-
-/**
- * e1000e_set_laa_state_82571 - Set locally administered address state
- * @hw: pointer to the HW structure
- * @state: enable/disable locally administered address
- *
- * Enable/Disable the current locally administered address state.
- **/
-void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
-{
- if (hw->mac.type != e1000_82571)
- return;
-
- hw->dev_spec.e82571.laa_is_present = state;
-
- /* If workaround is activated... */
- if (state)
- /*
- * Hold a copy of the LAA in RAR[14] This is done so that
- * between the time RAR[0] gets clobbered and the time it
- * gets fixed, the actual LAA is in one of the RARs and no
- * incoming packets directed to this port are dropped.
- * Eventually the LAA will be in RAR[0] and RAR[14].
- */
- e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
-}
-
-/**
- * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Verifies that the EEPROM has completed the update. After updating the
- * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If
- * the checksum fix is not implemented, we need to set the bit and update
- * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect,
- * we need to return bad checksum.
- **/
-static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- s32 ret_val;
- u16 data;
-
- if (nvm->type != e1000_nvm_flash_hw)
- return 0;
-
- /*
- * Check bit 4 of word 10h. If it is 0, firmware is done updating
- * 10h-12h. Checksum may need to be fixed.
- */
- ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
- if (ret_val)
- return ret_val;
-
- if (!(data & 0x10)) {
- /*
- * Read 0x23 and check bit 15. This bit is a 1
- * when the checksum has already been fixed. If
- * the checksum is still wrong and this bit is a
- * 1, we need to return bad checksum. Otherwise,
- * we need to set this bit to a 1 and update the
- * checksum.
- */
- ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
- if (ret_val)
- return ret_val;
-
- if (!(data & 0x8000)) {
- data |= 0x8000;
- ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_update_nvm_checksum(hw);
- }
- }
-
- return 0;
-}
-
-/**
- * e1000_read_mac_addr_82571 - Read device MAC address
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- if (hw->mac.type == e1000_82571) {
- /*
- * If there's an alternate MAC address place it in RAR0
- * so that it will override the Si installed default perm
- * address.
- */
- ret_val = e1000_check_alt_mac_addr_generic(hw);
- if (ret_val)
- goto out;
- }
-
- ret_val = e1000_read_mac_addr_generic(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, remove the link.
- **/
-static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- struct e1000_mac_info *mac = &hw->mac;
-
- if (!(phy->ops.check_reset_block))
- return;
-
- /* If the management interface is not enabled, then power down */
- if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
- e1000_power_down_phy_copper(hw);
-}
-
-/**
- * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
- * @hw: pointer to the HW structure
- *
- * Clears the hardware counters by reading the counter registers.
- **/
-static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
-{
- e1000e_clear_hw_cntrs_base(hw);
-
- er32(PRC64);
- er32(PRC127);
- er32(PRC255);
- er32(PRC511);
- er32(PRC1023);
- er32(PRC1522);
- er32(PTC64);
- er32(PTC127);
- er32(PTC255);
- er32(PTC511);
- er32(PTC1023);
- er32(PTC1522);
-
- er32(ALGNERRC);
- er32(RXERRC);
- er32(TNCRS);
- er32(CEXTERR);
- er32(TSCTC);
- er32(TSCTFC);
-
- er32(MGTPRC);
- er32(MGTPDC);
- er32(MGTPTC);
-
- er32(IAC);
- er32(ICRXOC);
-
- er32(ICRXPTC);
- er32(ICRXATC);
- er32(ICTXPTC);
- er32(ICTXATC);
- er32(ICTXQEC);
- er32(ICTXQMTC);
- er32(ICRXDMTC);
-}
-
-static struct e1000_mac_operations e82571_mac_ops = {
- /* .check_mng_mode: mac type dependent */
- /* .check_for_link: media type dependent */
- .id_led_init = e1000e_id_led_init,
- .cleanup_led = e1000e_cleanup_led_generic,
- .clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
- .get_bus_info = e1000e_get_bus_info_pcie,
- .set_lan_id = e1000_set_lan_id_multi_port_pcie,
- /* .get_link_up_info: media type dependent */
- /* .led_on: mac type dependent */
- .led_off = e1000e_led_off_generic,
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .write_vfta = e1000_write_vfta_generic,
- .clear_vfta = e1000_clear_vfta_82571,
- .reset_hw = e1000_reset_hw_82571,
- .init_hw = e1000_init_hw_82571,
- .setup_link = e1000_setup_link_82571,
- /* .setup_physical_interface: media type dependent */
- .setup_led = e1000e_setup_led_generic,
- .read_mac_addr = e1000_read_mac_addr_82571,
-};
-
-static struct e1000_phy_operations e82_phy_ops_igp = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_igp,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = NULL,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
- .get_cfg_done = e1000_get_cfg_done_82571,
- .get_cable_length = e1000e_get_cable_length_igp_2,
- .get_info = e1000e_get_phy_info_igp,
- .read_reg = e1000e_read_phy_reg_igp,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_igp,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_phy_operations e82_phy_ops_m88 = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
- .get_cfg_done = e1000e_get_cfg_done,
- .get_cable_length = e1000e_get_cable_length_m88,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000e_read_phy_reg_m88,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_m88,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_phy_operations e82_phy_ops_bm = {
- .acquire = e1000_get_hw_semaphore_82571,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
- .get_cfg_done = e1000e_get_cfg_done,
- .get_cable_length = e1000e_get_cable_length_m88,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000e_read_phy_reg_bm2,
- .release = e1000_put_hw_semaphore_82571,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000e_write_phy_reg_bm2,
- .cfg_on_link_up = NULL,
-};
-
-static struct e1000_nvm_operations e82571_nvm_ops = {
- .acquire = e1000_acquire_nvm_82571,
- .read = e1000e_read_nvm_eerd,
- .release = e1000_release_nvm_82571,
- .update = e1000_update_nvm_checksum_82571,
- .valid_led_default = e1000_valid_led_default_82571,
- .validate = e1000_validate_nvm_checksum_82571,
- .write = e1000_write_nvm_82571,
-};
-
-struct e1000_info e1000_82571_info = {
- .mac = e1000_82571,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_RESET_OVERWRITES_LAA /* errata */
- | FLAG_TARC_SPEED_MODE_BIT /* errata */
- | FLAG_APME_CHECK_PORT_B,
- .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
- | FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_igp,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82572_info = {
- .mac = e1000_82572,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_TARC_SPEED_MODE_BIT, /* errata */
- .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
- | FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_igp,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82573_info = {
- .mac = e1000_82573,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_SWSM_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L1
- | FLAG2_DISABLE_ASPM_L0S,
- .pba = 20,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_m88,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82574_info = {
- .mac = e1000_82574,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_MSIX
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_CHECK_PHY_HANG
- | FLAG2_DISABLE_ASPM_L0S,
- .pba = 32,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_bm,
- .nvm_ops = &e82571_nvm_ops,
-};
-
-struct e1000_info e1000_82583_info = {
- .mac = e1000_82583,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_SMART_POWER_DOWN
- | FLAG_HAS_AMT
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_CTRLEXT_ON_LOAD,
- .flags2 = FLAG2_DISABLE_ASPM_L0S,
- .pba = 32,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_82571,
- .mac_ops = &e82571_mac_ops,
- .phy_ops = &e82_phy_ops_bm,
- .nvm_ops = &e82571_nvm_ops,
-};
-
+++ /dev/null
-################################################################################
-#
-# Intel PRO/1000 Linux driver
-# Copyright(c) 1999 - 2011 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# Linux NICS <linux.nics@intel.com>
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) PRO/1000 ethernet driver
-#
-
-obj-$(CONFIG_E1000E) += e1000e.o
-
-e1000e-objs := 82571.o ich8lan.o es2lan.o \
- lib.o phy.o param.o ethtool.o netdev.o
-
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define E1000_WUC_APME 0x00000001 /* APM Enable */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
-
-/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
-
-/* Wake Up Status */
-#define E1000_WUS_LNKC E1000_WUFC_LNKC
-#define E1000_WUS_MAG E1000_WUFC_MAG
-#define E1000_WUS_EX E1000_WUFC_EX
-#define E1000_WUS_MC E1000_WUFC_MC
-#define E1000_WUS_BC E1000_WUFC_BC
-
-/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
-#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
-#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
-#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
-#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_EIAME 0x01000000
-#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
-#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
-#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
-#define E1000_CTRL_EXT_LSECCK 0x00001000
-#define E1000_CTRL_EXT_PHYPDEN 0x00100000
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
-#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
-#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
-#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
-
-/* mask to determine if packets should be dropped due to frame errors */
-#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
- E1000_RXD_ERR_CE | \
- E1000_RXD_ERR_SE | \
- E1000_RXD_ERR_SEQ | \
- E1000_RXD_ERR_CXE | \
- E1000_RXD_ERR_RXE)
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
-
-#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
-
-/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
-/* Enable MAC address filtering */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
-/* Enable MNG packets to host memory */
-#define E1000_MANC_EN_MNG2HOST 0x00200000
-
-#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */
-#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */
-#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */
-#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */
-
-/* Receive Control */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
-#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */
-#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */
-#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */
-/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
-#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */
-#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */
-#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
-#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
-#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
-#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
-
-/*
- * Use byte values for the following shift parameters
- * Usage:
- * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- * E1000_PSRCTL_BSIZE0_MASK) |
- * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- * E1000_PSRCTL_BSIZE1_MASK) |
- * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- * E1000_PSRCTL_BSIZE2_MASK) |
- * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- * E1000_PSRCTL_BSIZE3_MASK))
- * where value0 = [128..16256], default=256
- * value1 = [1024..64512], default=4096
- * value2 = [0..64512], default=4096
- * value3 = [0..64512], default=0
- */
-
-#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
-
-#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
-
-/* SWFW_SYNC Definitions */
-#define E1000_SWFW_EEP_SM 0x1
-#define E1000_SWFW_PHY0_SM 0x2
-#define E1000_SWFW_PHY1_SM 0x4
-#define E1000_SWFW_CSR_SM 0x8
-
-/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
-#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
-#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
-#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
-#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
-#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
-#define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */
-#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-
-/*
- * Bit definitions for the Management Data IO (MDIO) and Management Data
- * Clock (MDC) pins in the Device Control Register.
- */
-
-/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
-#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
-
-/* Constants used to interpret the masked PCI-X bus speed. */
-
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
-#define ADVERTISE_1000_FULL 0x0020
-
-/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
-
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
-
-/* LED Control */
-#define E1000_PHY_LED0_MODE_MASK 0x00000007
-#define E1000_PHY_LED0_IVRT 0x00000008
-#define E1000_PHY_LED0_MASK 0x0000001F
-
-#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
-#define E1000_LEDCTL_LED0_MODE_SHIFT 0
-#define E1000_LEDCTL_LED0_IVRT 0x00000040
-#define E1000_LEDCTL_LED0_BLINK 0x00000080
-
-#define E1000_LEDCTL_MODE_LINK_UP 0x2
-#define E1000_LEDCTL_MODE_LED_ON 0xE
-#define E1000_LEDCTL_MODE_LED_OFF 0xF
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
-#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
-#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
-#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
-#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
-#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
-#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
-
-/* Transmit Control */
-#define E1000_TCTL_EN 0x00000002 /* enable Tx */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
-#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
-#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
-
-/* Transmit Arbitration Count */
-
-/* SerDes Control */
-#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
-
-/* Receive Checksum Control */
-#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
-
-/* Header split receive */
-#define E1000_RFCTL_NFSW_DIS 0x00000040
-#define E1000_RFCTL_NFSR_DIS 0x00000080
-#define E1000_RFCTL_ACK_DIS 0x00001000
-#define E1000_RFCTL_EXTEN 0x00008000
-#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
-#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
-
-/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD 15
-#define E1000_CT_SHIFT 4
-#define E1000_COLLISION_DISTANCE 63
-#define E1000_COLD_SHIFT 12
-
-/* Default values for the transmit IPG register */
-#define DEFAULT_82543_TIPG_IPGT_COPPER 8
-
-#define E1000_TIPG_IPGT_MASK 0x000003FF
-
-#define DEFAULT_82543_TIPG_IPGR1 8
-#define E1000_TIPG_IPGR1_SHIFT 10
-
-#define DEFAULT_82543_TIPG_IPGR2 6
-#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
-#define E1000_TIPG_IPGR2_SHIFT 20
-
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* Extended Configuration Control and Size */
-#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
-#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
-#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
-#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
-#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
-#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
-#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16
-
-#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
-#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
-#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
-#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
-
-#define E1000_KABGTXD_BGSQLBIAS 0x00050000
-
-/* PBA constants */
-#define E1000_PBA_8K 0x0008 /* 8KB */
-#define E1000_PBA_16K 0x0010 /* 16KB */
-
-#define E1000_PBS_16K E1000_PBA_16K
-
-#define IFS_MAX 80
-#define IFS_MIN 40
-#define IFS_RATIO 4
-#define IFS_STEP 10
-#define MIN_NUM_XMITS 1000
-
-/* SW Semaphore Register */
-#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
-
-#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
-
-/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
-#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
-#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
-#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
-#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
-#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
-#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
-
-/* PBA ECC Register */
-#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
-#define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */
-#define E1000_PBA_ECC_CORR_EN 0x00000001 /* ECC correction enable */
-#define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */
-#define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 for ECC */
-
-/*
- * This defines the bits that are set in the Interrupt Mask
- * Set/Read Register. Each bit is documented below:
- * o RXT0 = Receiver Timer Interrupt (ring 0)
- * o TXDW = Transmit Descriptor Written Back
- * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- * o RXSEQ = Receive Sequence Error
- * o LSC = Link Status Change
- */
-#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC)
-
-/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
-#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
-#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
-#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
-#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
-#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
-
-/* Interrupt Cause Set */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
-
-/* Transmit Descriptor Control */
-#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
-#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
-#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
-#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
-#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
-#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
-/* Enable the counting of desc. still to be processed. */
-#define E1000_TXDCTL_COUNT_DESC 0x00400000
-
-/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE 0x8808
-
-/* 802.1q VLAN Packet Size */
-#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-
-/* Receive Address */
-/*
- * Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * Technically, we have 16 spots. However, we reserve one of these spots
- * (RAR[15]) for our directed address used by controllers with
- * manageability enabled, allowing us room for 15 multicast addresses.
- */
-#define E1000_RAR_ENTRIES 15
-#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
-#define E1000_RAL_MAC_ADDR_LEN 4
-#define E1000_RAH_MAC_ADDR_LEN 2
-
-/* Error Codes */
-#define E1000_ERR_NVM 1
-#define E1000_ERR_PHY 2
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_PARAM 4
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_PHY_TYPE 6
-#define E1000_ERR_RESET 9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_ERR_HOST_INTERFACE_COMMAND 11
-#define E1000_BLK_PHY_RESET 12
-#define E1000_ERR_SWFW_SYNC 13
-#define E1000_NOT_IMPLEMENTED 14
-#define E1000_ERR_INVALID_ARGUMENT 16
-#define E1000_ERR_NO_SPACE 17
-#define E1000_ERR_NVM_PBA_SECTION 18
-
-/* Loop limit on how long we wait for auto-negotiation to complete */
-#define FIBER_LINK_UP_LIMIT 50
-#define COPPER_LINK_UP_LIMIT 10
-#define PHY_AUTO_NEG_LIMIT 45
-#define PHY_FORCE_LIMIT 20
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT 800
-/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT 100
-/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
-#define MDIO_OWNERSHIP_TIMEOUT 10
-/* Number of milliseconds for NVM auto read done after MAC reset. */
-#define AUTO_READ_DONE_TIMEOUT 10
-
-/* Flow Control */
-#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
-#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
-#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
-
-/* Transmit Configuration Word */
-#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
-#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
-#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
-#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
-#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
-
-/* Receive Configuration Word */
-#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
-#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
-#define E1000_RXCW_C 0x20000000 /* Receive config */
-#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
-
-/* PCI Express Control */
-#define E1000_GCR_RXD_NO_SNOOP 0x00000001
-#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
-#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
-#define E1000_GCR_TXD_NO_SNOOP 0x00000008
-#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
-#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
-
-#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
- E1000_GCR_RXDSCW_NO_SNOOP | \
- E1000_GCR_RXDSCR_NO_SNOOP | \
- E1000_GCR_TXD_NO_SNOOP | \
- E1000_GCR_TXDSCW_NO_SNOOP | \
- E1000_GCR_TXDSCR_NO_SNOOP)
-
-/* PHY Control Register */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-
-/* PHY Status Register */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-
-/* Autoneg Advertisement Register */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-
-/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
-
-/* Autoneg Expansion Register */
-#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
-
-/* 1000BASE-T Control Register */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
- /* 0=DTE device */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
-
-/* 1000BASE-T Status Register */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-#define PHY_CONTROL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Register */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
-
-#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
-
-/* NVM Control */
-#define E1000_EECD_SK 0x00000001 /* NVM Clock */
-#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* NVM Data In */
-#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
-#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
-#define E1000_EECD_PRES 0x00000100 /* NVM Present */
-#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
-/* NVM Addressing bits based on type (0-small, 1-large) */
-#define E1000_EECD_ADDR_BITS 0x00000400
-#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
-#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
-#define E1000_EECD_SIZE_EX_SHIFT 11
-#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
-#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
-#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
-#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
-
-#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
-#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START 1 /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
-#define E1000_FLASH_UPDATES 2000
-
-/* NVM Word Offsets */
-#define NVM_COMPAT 0x0003
-#define NVM_ID_LED_SETTINGS 0x0004
-#define NVM_INIT_CONTROL2_REG 0x000F
-#define NVM_INIT_CONTROL3_PORT_B 0x0014
-#define NVM_INIT_3GIO_3 0x001A
-#define NVM_INIT_CONTROL3_PORT_A 0x0024
-#define NVM_CFG 0x0012
-#define NVM_ALT_MAC_ADDR_PTR 0x0037
-#define NVM_CHECKSUM_REG 0x003F
-
-#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
-
-#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
-
-/* Mask bits for fields in Word 0x0f of the NVM */
-#define NVM_WORD0F_PAUSE_MASK 0x3000
-#define NVM_WORD0F_PAUSE 0x1000
-#define NVM_WORD0F_ASM_DIR 0x2000
-
-/* Mask bits for fields in Word 0x1a of the NVM */
-#define NVM_WORD1A_ASPM_MASK 0x000C
-
-/* Mask bits for fields in Word 0x03 of the EEPROM */
-#define NVM_COMPAT_LOM 0x0800
-
-/* length of string needed to store PBA number */
-#define E1000_PBANUM_LENGTH 11
-
-/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
-#define NVM_SUM 0xBABA
-
-/* PBA (printed board assembly) number words */
-#define NVM_PBA_OFFSET_0 8
-#define NVM_PBA_OFFSET_1 9
-#define NVM_PBA_PTR_GUARD 0xFAFA
-#define NVM_WORD_SIZE_BASE_SHIFT 6
-
-/* NVM Commands - SPI */
-#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
-#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
-#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
-#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
-#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
-
-/* SPI NVM Status Register */
-#define NVM_STATUS_RDY_SPI 0x01
-
-/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000 0x0000
-#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
- (ID_LED_OFF1_OFF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2 0x1
-#define ID_LED_DEF1_ON2 0x2
-#define ID_LED_DEF1_OFF2 0x3
-#define ID_LED_ON1_DEF2 0x4
-#define ID_LED_ON1_ON2 0x5
-#define ID_LED_ON1_OFF2 0x6
-#define ID_LED_OFF1_DEF2 0x7
-#define ID_LED_OFF1_ON2 0x8
-#define ID_LED_OFF1_OFF2 0x9
-
-#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE 0x0300
-#define IGP_LED3_MODE 0x07000000
-
-/* PCI/PCI-X/PCI-EX Config space */
-#define PCI_HEADER_TYPE_REGISTER 0x0E
-#define PCIE_LINK_STATUS 0x12
-
-#define PCI_HEADER_TYPE_MULTIFUNC 0x80
-#define PCIE_LINK_WIDTH_MASK 0x3F0
-#define PCIE_LINK_WIDTH_SHIFT 4
-
-#define PHY_REVISION_MASK 0xFFFFFFF0
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF
-
-/* Bit definitions for valid PHY IDs. */
-/*
- * I = Integrated
- * E = External
- */
-#define M88E1000_E_PHY_ID 0x01410C50
-#define M88E1000_I_PHY_ID 0x01410C30
-#define M88E1011_I_PHY_ID 0x01410C20
-#define IGP01E1000_I_PHY_ID 0x02A80380
-#define M88E1111_I_PHY_ID 0x01410CC0
-#define GG82563_E_PHY_ID 0x01410CA0
-#define IGP03E1000_E_PHY_ID 0x02A80390
-#define IFE_E_PHY_ID 0x02A80330
-#define IFE_PLUS_E_PHY_ID 0x02A80320
-#define IFE_C_E_PHY_ID 0x02A80310
-#define BME1000_E_PHY_ID 0x01410CB0
-#define BME1000_E_PHY_ID_R2 0x01410CB1
-#define I82577_E_PHY_ID 0x01540050
-#define I82578_E_PHY_ID 0x004DD040
-#define I82579_E_PHY_ID 0x01540090
-
-/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-
-#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
-
-/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040
-/* Auto crossover enabled all speeds */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060
-/*
- * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold)
- * 0=Normal 10BASE-T Rx Threshold
- */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-
-/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave
- */
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
-
-/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
-
-#define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020
-#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C
-
-/* BME1000 PHY Specific Control Register */
-#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
-
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
-
-/*
- * Bits...
- * 15-5: page
- * 4-0: register offset
- */
-#define GG82563_PAGE_SHIFT 5
-#define GG82563_REG(page, reg) \
- (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
-#define GG82563_MIN_ALT_REG 30
-
-/* GG82563 Specific Registers */
-#define GG82563_PHY_SPEC_CTRL \
- GG82563_REG(0, 16) /* PHY Specific Control */
-#define GG82563_PHY_PAGE_SELECT \
- GG82563_REG(0, 22) /* Page Select */
-#define GG82563_PHY_SPEC_CTRL_2 \
- GG82563_REG(0, 26) /* PHY Specific Control 2 */
-#define GG82563_PHY_PAGE_SELECT_ALT \
- GG82563_REG(0, 29) /* Alternate Page Select */
-
-#define GG82563_PHY_MAC_SPEC_CTRL \
- GG82563_REG(2, 21) /* MAC Specific Control Register */
-
-#define GG82563_PHY_DSP_DISTANCE \
- GG82563_REG(5, 26) /* DSP Distance */
-
-/* Page 193 - Port Control Registers */
-#define GG82563_PHY_KMRN_MODE_CTRL \
- GG82563_REG(193, 16) /* Kumeran Mode Control */
-#define GG82563_PHY_PWR_MGMT_CTRL \
- GG82563_REG(193, 20) /* Power Management Control */
-
-/* Page 194 - KMRN Registers */
-#define GG82563_PHY_INBAND_CTRL \
- GG82563_REG(194, 18) /* Inband Control */
-
-/* MDI Control */
-#define E1000_MDIC_REG_SHIFT 16
-#define E1000_MDIC_PHY_SHIFT 21
-#define E1000_MDIC_OP_WRITE 0x04000000
-#define E1000_MDIC_OP_READ 0x08000000
-#define E1000_MDIC_READY 0x10000000
-#define E1000_MDIC_ERROR 0x40000000
-
-/* SerDes Control */
-#define E1000_GEN_POLL_TIMEOUT 640
-
-#endif /* _E1000_DEFINES_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* Linux PRO/1000 Ethernet Driver main header file */
-
-#ifndef _E1000_H_
-#define _E1000_H_
-
-#include <linux/bitops.h>
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/workqueue.h>
-#include <linux/io.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/crc32.h>
-#include <linux/if_vlan.h>
-
-#include "hw.h"
-
-struct e1000_info;
-
-#define e_dbg(format, arg...) \
- netdev_dbg(hw->adapter->netdev, format, ## arg)
-#define e_err(format, arg...) \
- netdev_err(adapter->netdev, format, ## arg)
-#define e_info(format, arg...) \
- netdev_info(adapter->netdev, format, ## arg)
-#define e_warn(format, arg...) \
- netdev_warn(adapter->netdev, format, ## arg)
-#define e_notice(format, arg...) \
- netdev_notice(adapter->netdev, format, ## arg)
-
-
-/* Interrupt modes, as used by the IntMode parameter */
-#define E1000E_INT_MODE_LEGACY 0
-#define E1000E_INT_MODE_MSI 1
-#define E1000E_INT_MODE_MSIX 2
-
-/* Tx/Rx descriptor defines */
-#define E1000_DEFAULT_TXD 256
-#define E1000_MAX_TXD 4096
-#define E1000_MIN_TXD 64
-
-#define E1000_DEFAULT_RXD 256
-#define E1000_MAX_RXD 4096
-#define E1000_MIN_RXD 64
-
-#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
-#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
-
-/* Early Receive defines */
-#define E1000_ERT_2048 0x100
-
-#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
-
-/* How many Tx Descriptors do we need to call netif_wake_queue ? */
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define AUTO_ALL_MODES 0
-#define E1000_EEPROM_APME 0x0400
-
-#define E1000_MNG_VLAN_NONE (-1)
-
-/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
-
-#define DEFAULT_JUMBO 9234
-
-/* BM/HV Specific Registers */
-#define BM_PORT_CTRL_PAGE 769
-
-#define PHY_UPPER_SHIFT 21
-#define BM_PHY_REG(page, reg) \
- (((reg) & MAX_PHY_REG_ADDRESS) |\
- (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
- (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
-
-/* PHY Wakeup Registers and defines */
-#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
-#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
-#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
-#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
-#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
-#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
-
-#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
-#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
-#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
-#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
-#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
-#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
-#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
-
-#define HV_STATS_PAGE 778
-#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
-#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
-#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
-#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
-#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
-#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
-#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
-#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
-#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
-#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
-#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
-#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
-#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
-#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
-
-#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
-
-/* BM PHY Copper Specific Status */
-#define BM_CS_STATUS 17
-#define BM_CS_STATUS_LINK_UP 0x0400
-#define BM_CS_STATUS_RESOLVED 0x0800
-#define BM_CS_STATUS_SPEED_MASK 0xC000
-#define BM_CS_STATUS_SPEED_1000 0x8000
-
-/* 82577 Mobile Phy Status Register */
-#define HV_M_STATUS 26
-#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
-#define HV_M_STATUS_SPEED_MASK 0x0300
-#define HV_M_STATUS_SPEED_1000 0x0200
-#define HV_M_STATUS_LINK_UP 0x0040
-
-/* Time to wait before putting the device into D3 if there's no link (in ms). */
-#define LINK_TIMEOUT 100
-
-#define DEFAULT_RDTR 0
-#define DEFAULT_RADV 8
-#define BURST_RDTR 0x20
-#define BURST_RADV 0x20
-
-/*
- * in the case of WTHRESH, it appears at least the 82571/2 hardware
- * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
- * WTHRESH=4, and since we want 64 bytes at a time written back, set
- * it to 5
- */
-#define E1000_TXDCTL_DMA_BURST_ENABLE \
- (E1000_TXDCTL_GRAN | /* set descriptor granularity */ \
- E1000_TXDCTL_COUNT_DESC | \
- (5 << 16) | /* wthresh must be +1 more than desired */\
- (1 << 8) | /* hthresh */ \
- 0x1f) /* pthresh */
-
-#define E1000_RXDCTL_DMA_BURST_ENABLE \
- (0x01000000 | /* set descriptor granularity */ \
- (4 << 16) | /* set writeback threshold */ \
- (4 << 8) | /* set prefetch threshold */ \
- 0x20) /* set hthresh */
-
-#define E1000_TIDV_FPD (1 << 31)
-#define E1000_RDTR_FPD (1 << 31)
-
-enum e1000_boards {
- board_82571,
- board_82572,
- board_82573,
- board_82574,
- board_82583,
- board_80003es2lan,
- board_ich8lan,
- board_ich9lan,
- board_ich10lan,
- board_pchlan,
- board_pch2lan,
-};
-
-struct e1000_ps_page {
- struct page *page;
- u64 dma; /* must be u64 - written to hw */
-};
-
-/*
- * wrappers around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer
- */
-struct e1000_buffer {
- dma_addr_t dma;
- struct sk_buff *skb;
- union {
- /* Tx */
- struct {
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- unsigned int segs;
- unsigned int bytecount;
- u16 mapped_as_page;
- };
- /* Rx */
- struct {
- /* arrays of page information for packet split */
- struct e1000_ps_page *ps_pages;
- struct page *page;
- };
- };
-};
-
-struct e1000_ring {
- void *desc; /* pointer to ring memory */
- dma_addr_t dma; /* phys address of ring */
- unsigned int size; /* length of ring in bytes */
- unsigned int count; /* number of desc. in ring */
-
- u16 next_to_use;
- u16 next_to_clean;
-
- u16 head;
- u16 tail;
-
- /* array of buffer information structs */
- struct e1000_buffer *buffer_info;
-
- char name[IFNAMSIZ + 5];
- u32 ims_val;
- u32 itr_val;
- u16 itr_register;
- int set_itr;
-
- struct sk_buff *rx_skb_top;
-};
-
-/* PHY register snapshot values */
-struct e1000_phy_regs {
- u16 bmcr; /* basic mode control register */
- u16 bmsr; /* basic mode status register */
- u16 advertise; /* auto-negotiation advertisement */
- u16 lpa; /* link partner ability register */
- u16 expansion; /* auto-negotiation expansion reg */
- u16 ctrl1000; /* 1000BASE-T control register */
- u16 stat1000; /* 1000BASE-T status register */
- u16 estatus; /* extended status register */
-};
-
-/* board specific private data structure */
-struct e1000_adapter {
- struct timer_list watchdog_timer;
- struct timer_list phy_info_timer;
- struct timer_list blink_timer;
-
- struct work_struct reset_task;
- struct work_struct watchdog_task;
-
- const struct e1000_info *ei;
-
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u32 bd_number;
- u32 rx_buffer_len;
- u16 mng_vlan_id;
- u16 link_speed;
- u16 link_duplex;
- u16 eeprom_vers;
-
- /* track device up/down/testing state */
- unsigned long state;
-
- /* Interrupt Throttle Rate */
- u32 itr;
- u32 itr_setting;
- u16 tx_itr;
- u16 rx_itr;
-
- /*
- * Tx
- */
- struct e1000_ring *tx_ring /* One per active queue */
- ____cacheline_aligned_in_smp;
-
- struct napi_struct napi;
-
- unsigned int restart_queue;
- u32 txd_cmd;
-
- bool detect_tx_hung;
- u8 tx_timeout_factor;
-
- u32 tx_int_delay;
- u32 tx_abs_int_delay;
-
- unsigned int total_tx_bytes;
- unsigned int total_tx_packets;
- unsigned int total_rx_bytes;
- unsigned int total_rx_packets;
-
- /* Tx stats */
- u64 tpt_old;
- u64 colc_old;
- u32 gotc;
- u64 gotc_old;
- u32 tx_timeout_count;
- u32 tx_fifo_head;
- u32 tx_head_addr;
- u32 tx_fifo_size;
- u32 tx_dma_failed;
-
- /*
- * Rx
- */
- bool (*clean_rx) (struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
- ____cacheline_aligned_in_smp;
- void (*alloc_rx_buf) (struct e1000_adapter *adapter,
- int cleaned_count, gfp_t gfp);
- struct e1000_ring *rx_ring;
-
- u32 rx_int_delay;
- u32 rx_abs_int_delay;
-
- /* Rx stats */
- u64 hw_csum_err;
- u64 hw_csum_good;
- u64 rx_hdr_split;
- u32 gorc;
- u64 gorc_old;
- u32 alloc_rx_buff_failed;
- u32 rx_dma_failed;
-
- unsigned int rx_ps_pages;
- u16 rx_ps_bsize0;
- u32 max_frame_size;
- u32 min_frame_size;
-
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- /* structs defined in e1000_hw.h */
- struct e1000_hw hw;
-
- spinlock_t stats64_lock;
- struct e1000_hw_stats stats;
- struct e1000_phy_info phy_info;
- struct e1000_phy_stats phy_stats;
-
- /* Snapshot of PHY registers */
- struct e1000_phy_regs phy_regs;
-
- struct e1000_ring test_tx_ring;
- struct e1000_ring test_rx_ring;
- u32 test_icr;
-
- u32 msg_enable;
- unsigned int num_vectors;
- struct msix_entry *msix_entries;
- int int_mode;
- u32 eiac_mask;
-
- u32 eeprom_wol;
- u32 wol;
- u32 pba;
- u32 max_hw_frame_size;
-
- bool fc_autoneg;
-
- unsigned int flags;
- unsigned int flags2;
- struct work_struct downshift_task;
- struct work_struct update_phy_task;
- struct work_struct print_hang_task;
-
- bool idle_check;
- int phy_hang_count;
-};
-
-struct e1000_info {
- enum e1000_mac_type mac;
- unsigned int flags;
- unsigned int flags2;
- u32 pba;
- u32 max_hw_frame_size;
- s32 (*get_variants)(struct e1000_adapter *);
- struct e1000_mac_operations *mac_ops;
- struct e1000_phy_operations *phy_ops;
- struct e1000_nvm_operations *nvm_ops;
-};
-
-/* hardware capability, feature, and workaround flags */
-#define FLAG_HAS_AMT (1 << 0)
-#define FLAG_HAS_FLASH (1 << 1)
-#define FLAG_HAS_HW_VLAN_FILTER (1 << 2)
-#define FLAG_HAS_WOL (1 << 3)
-#define FLAG_HAS_ERT (1 << 4)
-#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
-#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
-#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
-#define FLAG_READ_ONLY_NVM (1 << 8)
-#define FLAG_IS_ICH (1 << 9)
-#define FLAG_HAS_MSIX (1 << 10)
-#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
-#define FLAG_IS_QUAD_PORT_A (1 << 12)
-#define FLAG_IS_QUAD_PORT (1 << 13)
-#define FLAG_TIPG_MEDIUM_FOR_80003ESLAN (1 << 14)
-#define FLAG_APME_IN_WUC (1 << 15)
-#define FLAG_APME_IN_CTRL3 (1 << 16)
-#define FLAG_APME_CHECK_PORT_B (1 << 17)
-#define FLAG_DISABLE_FC_PAUSE_TIME (1 << 18)
-#define FLAG_NO_WAKE_UCAST (1 << 19)
-#define FLAG_MNG_PT_ENABLED (1 << 20)
-#define FLAG_RESET_OVERWRITES_LAA (1 << 21)
-#define FLAG_TARC_SPEED_MODE_BIT (1 << 22)
-#define FLAG_TARC_SET_BIT_ZERO (1 << 23)
-#define FLAG_RX_NEEDS_RESTART (1 << 24)
-#define FLAG_LSC_GIG_SPEED_DROP (1 << 25)
-#define FLAG_SMART_POWER_DOWN (1 << 26)
-#define FLAG_MSI_ENABLED (1 << 27)
-#define FLAG_RX_CSUM_ENABLED (1 << 28)
-#define FLAG_TSO_FORCE (1 << 29)
-#define FLAG_RX_RESTART_NOW (1 << 30)
-#define FLAG_MSI_TEST_FAILED (1 << 31)
-
-/* CRC Stripping defines */
-#define FLAG2_CRC_STRIPPING (1 << 0)
-#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
-#define FLAG2_IS_DISCARDING (1 << 2)
-#define FLAG2_DISABLE_ASPM_L1 (1 << 3)
-#define FLAG2_HAS_PHY_STATS (1 << 4)
-#define FLAG2_HAS_EEE (1 << 5)
-#define FLAG2_DMA_BURST (1 << 6)
-#define FLAG2_DISABLE_ASPM_L0S (1 << 7)
-#define FLAG2_DISABLE_AIM (1 << 8)
-#define FLAG2_CHECK_PHY_HANG (1 << 9)
-
-#define E1000_RX_DESC_PS(R, i) \
- (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
-#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
-#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
-#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
-#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
-
-enum e1000_state_t {
- __E1000_TESTING,
- __E1000_RESETTING,
- __E1000_DOWN
-};
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-extern char e1000e_driver_name[];
-extern const char e1000e_driver_version[];
-
-extern void e1000e_check_options(struct e1000_adapter *adapter);
-extern void e1000e_set_ethtool_ops(struct net_device *netdev);
-
-extern int e1000e_up(struct e1000_adapter *adapter);
-extern void e1000e_down(struct e1000_adapter *adapter);
-extern void e1000e_reinit_locked(struct e1000_adapter *adapter);
-extern void e1000e_reset(struct e1000_adapter *adapter);
-extern void e1000e_power_up_phy(struct e1000_adapter *adapter);
-extern int e1000e_setup_rx_resources(struct e1000_adapter *adapter);
-extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
-extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
-extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
-extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64
- *stats);
-extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
-extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
-extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
-extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
-
-extern unsigned int copybreak;
-
-extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw);
-
-extern struct e1000_info e1000_82571_info;
-extern struct e1000_info e1000_82572_info;
-extern struct e1000_info e1000_82573_info;
-extern struct e1000_info e1000_82574_info;
-extern struct e1000_info e1000_82583_info;
-extern struct e1000_info e1000_ich8_info;
-extern struct e1000_info e1000_ich9_info;
-extern struct e1000_info e1000_ich10_info;
-extern struct e1000_info e1000_pch_info;
-extern struct e1000_info e1000_pch2_info;
-extern struct e1000_info e1000_es2_info;
-
-extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
- u32 pba_num_size);
-
-extern s32 e1000e_commit_phy(struct e1000_hw *hw);
-
-extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
-
-extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
-extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
-
-extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
-extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state);
-extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
-extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
-extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
-extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
-extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
-extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
-
-extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
-extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
-extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
-extern s32 e1000e_setup_led_generic(struct e1000_hw *hw);
-extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
-extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
-extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
-extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
-extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
-extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
-extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
-extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
-extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
-extern s32 e1000e_id_led_init(struct e1000_hw *hw);
-extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
-extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
-extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
-extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
-extern s32 e1000e_setup_link(struct e1000_hw *hw);
-extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
-extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
-extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
- u8 *mc_addr_list,
- u32 mc_addr_count);
-extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
-extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
-extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
-extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
-extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
-extern void e1000e_config_collision_dist(struct e1000_hw *hw);
-extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
-extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
-extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
-extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
-extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
-extern void e1000e_reset_adaptive(struct e1000_hw *hw);
-extern void e1000e_update_adaptive(struct e1000_hw *hw);
-
-extern s32 e1000e_setup_copper_link(struct e1000_hw *hw);
-extern s32 e1000e_get_phy_id(struct e1000_hw *hw);
-extern void e1000e_put_hw_semaphore(struct e1000_hw *hw);
-extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
-extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
-extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
-extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
-extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
-extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
-extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
-extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
-extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
-extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
-extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
-extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
-extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
-extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
- u16 *phy_reg);
-extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
- u16 *phy_reg);
-extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
-extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
-extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
-extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
-extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
-extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
-extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000e_check_downshift(struct e1000_hw *hw);
-extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
-extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
- u16 *data);
-extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
-extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
- u16 data);
-extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
-extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
-extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
-
-extern s32 e1000_check_polarity_m88(struct e1000_hw *hw);
-extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
-extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
-extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
-extern bool e1000_check_phy_82574(struct e1000_hw *hw);
-
-static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
-{
- return hw->phy.ops.reset(hw);
-}
-
-static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
-{
- return hw->phy.ops.check_reset_block(hw);
-}
-
-static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return hw->phy.ops.read_reg(hw, offset, data);
-}
-
-static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return hw->phy.ops.write_reg(hw, offset, data);
-}
-
-static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
-{
- return hw->phy.ops.get_cable_length(hw);
-}
-
-extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
-extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
-extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
-extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
-extern void e1000e_release_nvm(struct e1000_hw *hw);
-extern void e1000e_reload_nvm(struct e1000_hw *hw);
-extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
-
-static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
-{
- if (hw->mac.ops.read_mac_addr)
- return hw->mac.ops.read_mac_addr(hw);
-
- return e1000_read_mac_addr_generic(hw);
-}
-
-static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
-{
- return hw->nvm.ops.validate(hw);
-}
-
-static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
-{
- return hw->nvm.ops.update(hw);
-}
-
-static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- return hw->nvm.ops.read(hw, offset, words, data);
-}
-
-static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- return hw->nvm.ops.write(hw, offset, words, data);
-}
-
-static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
-{
- return hw->phy.ops.get_info(hw);
-}
-
-static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
-{
- return hw->mac.ops.check_mng_mode(hw);
-}
-
-extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
-extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
-extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
-
-static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
-{
- return readl(hw->hw_addr + reg);
-}
-
-static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
-{
- writel(val, hw->hw_addr + reg);
-}
-
-#endif /* _E1000_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/*
- * 80003ES2LAN Gigabit Ethernet Controller (Copper)
- * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
- */
-
-#include "e1000.h"
-
-#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
-#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
-#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
-#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
-
-#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
-#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
-#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
-
-#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
-#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
-#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
-
-#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
-#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
-
-#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
-#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
-
-#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
-#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
-
-/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
-#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disab. */
-#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
-#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
-#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
-#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
-
-/* PHY Specific Control Register 2 (Page 0, Register 26) */
-#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000
- /* 1=Reverse Auto-Negotiation */
-
-/* MAC Specific Control Register (Page 2, Register 21) */
-/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
-#define GG82563_MSCR_TX_CLK_MASK 0x0007
-#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
-#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
-#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
-
-#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
-
-/* DSP Distance Register (Page 5, Register 26) */
-#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M
- 1 = 50-80M
- 2 = 80-110M
- 3 = 110-140M
- 4 = >140M */
-
-/* Kumeran Mode Control Register (Page 193, Register 16) */
-#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
-
-/* Max number of times Kumeran read/write should be validated */
-#define GG82563_MAX_KMRN_RETRY 0x5
-
-/* Power Management Control Register (Page 193, Register 20) */
-#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
- /* 1=Enable SERDES Electrical Idle */
-
-/* In-Band Control Register (Page 194, Register 18) */
-#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
-
-/*
- * A table for the GG82563 cable length where the range is defined
- * with a lower bound at "index" and the upper bound at
- * "index + 5".
- */
-static const u16 e1000_gg82563_cable_length_table[] = {
- 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
-#define GG82563_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_gg82563_cable_length_table)
-
-static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
-static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
-static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
-static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
-static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
-static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data);
-static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
-
-/**
- * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
-
- if (hw->phy.media_type != e1000_media_type_copper) {
- phy->type = e1000_phy_none;
- return 0;
- } else {
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
- }
-
- phy->addr = 1;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
- phy->type = e1000_phy_gg82563;
-
- /* This can only be done after all function pointers are setup. */
- ret_val = e1000e_get_phy_id(hw);
-
- /* Verify phy id */
- if (phy->id != GG82563_E_PHY_ID)
- return -E1000_ERR_PHY;
-
- return ret_val;
-}
-
-/**
- * e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u16 size;
-
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
- switch (nvm->override) {
- case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
- nvm->address_bits = 16;
- break;
- case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
- nvm->address_bits = 8;
- break;
- default:
- nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
- nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
- break;
- }
-
- nvm->type = e1000_nvm_eeprom_spi;
-
- size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
-
- /*
- * Added to a constant, "size" becomes the left-shift value
- * for setting word_size.
- */
- size += NVM_WORD_SIZE_BASE_SHIFT;
-
- /* EEPROM access above 16k is unsupported */
- if (size > 14)
- size = 14;
- nvm->word_size = 1 << size;
-
- return 0;
-}
-
-/**
- * e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_mac_operations *func = &mac->ops;
-
- /* Set media type */
- switch (adapter->pdev->device) {
- case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
- hw->phy.media_type = e1000_media_type_internal_serdes;
- break;
- default:
- hw->phy.media_type = e1000_media_type_copper;
- break;
- }
-
- /* Set mta register count */
- mac->mta_reg_count = 128;
- /* Set rar entry count */
- mac->rar_entry_count = E1000_RAR_ENTRIES;
- /* FWSM register */
- mac->has_fwsm = true;
- /* ARC supported; valid only if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (er32(FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
- /* Adaptive IFS not supported */
- mac->adaptive_ifs = false;
-
- /* check for link */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
- func->check_for_link = e1000e_check_for_copper_link;
- break;
- case e1000_media_type_fiber:
- func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
- func->check_for_link = e1000e_check_for_fiber_link;
- break;
- case e1000_media_type_internal_serdes:
- func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
- func->check_for_link = e1000e_check_for_serdes_link;
- break;
- default:
- return -E1000_ERR_CONFIG;
- break;
- }
-
- /* set lan id for port to determine which phy lock to use */
- hw->mac.ops.set_lan_id(hw);
-
- return 0;
-}
-
-static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- s32 rc;
-
- rc = e1000_init_mac_params_80003es2lan(adapter);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_80003es2lan(hw);
- if (rc)
- return rc;
-
- rc = e1000_init_phy_params_80003es2lan(hw);
- if (rc)
- return rc;
-
- return 0;
-}
-
-/**
- * e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
- * @hw: pointer to the HW structure
- *
- * A wrapper to acquire access rights to the correct PHY.
- **/
-static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
-{
- u16 mask;
-
- mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
- return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
-}
-
-/**
- * e1000_release_phy_80003es2lan - Release rights to access PHY
- * @hw: pointer to the HW structure
- *
- * A wrapper to release access rights to the correct PHY.
- **/
-static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
-{
- u16 mask;
-
- mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
- e1000_release_swfw_sync_80003es2lan(hw, mask);
-}
-
-/**
- * e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register
- * @hw: pointer to the HW structure
- *
- * Acquire the semaphore to access the Kumeran interface.
- *
- **/
-static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
-{
- u16 mask;
-
- mask = E1000_SWFW_CSR_SM;
-
- return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
-}
-
-/**
- * e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register
- * @hw: pointer to the HW structure
- *
- * Release the semaphore used to access the Kumeran interface
- **/
-static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
-{
- u16 mask;
-
- mask = E1000_SWFW_CSR_SM;
-
- e1000_release_swfw_sync_80003es2lan(hw, mask);
-}
-
-/**
- * e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
- * @hw: pointer to the HW structure
- *
- * Acquire the semaphore to access the EEPROM.
- **/
-static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000e_acquire_nvm(hw);
-
- if (ret_val)
- e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
-
- return ret_val;
-}
-
-/**
- * e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
- * @hw: pointer to the HW structure
- *
- * Release the semaphore used to access the EEPROM.
- **/
-static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
-{
- e1000e_release_nvm(hw);
- e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
-}
-
-/**
- * e1000_acquire_swfw_sync_80003es2lan - Acquire SW/FW semaphore
- * @hw: pointer to the HW structure
- * @mask: specifies which semaphore to acquire
- *
- * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
- * will also specify which port we're acquiring the lock for.
- **/
-static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
-{
- u32 swfw_sync;
- u32 swmask = mask;
- u32 fwmask = mask << 16;
- s32 i = 0;
- s32 timeout = 50;
-
- while (i < timeout) {
- if (e1000e_get_hw_semaphore(hw))
- return -E1000_ERR_SWFW_SYNC;
-
- swfw_sync = er32(SW_FW_SYNC);
- if (!(swfw_sync & (fwmask | swmask)))
- break;
-
- /*
- * Firmware currently using resource (fwmask)
- * or other software thread using resource (swmask)
- */
- e1000e_put_hw_semaphore(hw);
- mdelay(5);
- i++;
- }
-
- if (i == timeout) {
- e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
- return -E1000_ERR_SWFW_SYNC;
- }
-
- swfw_sync |= swmask;
- ew32(SW_FW_SYNC, swfw_sync);
-
- e1000e_put_hw_semaphore(hw);
-
- return 0;
-}
-
-/**
- * e1000_release_swfw_sync_80003es2lan - Release SW/FW semaphore
- * @hw: pointer to the HW structure
- * @mask: specifies which semaphore to acquire
- *
- * Release the SW/FW semaphore used to access the PHY or NVM. The mask
- * will also specify which port we're releasing the lock for.
- **/
-static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
-{
- u32 swfw_sync;
-
- while (e1000e_get_hw_semaphore(hw) != 0)
- ; /* Empty */
-
- swfw_sync = er32(SW_FW_SYNC);
- swfw_sync &= ~mask;
- ew32(SW_FW_SYNC, swfw_sync);
-
- e1000e_put_hw_semaphore(hw);
-}
-
-/**
- * e1000_read_phy_reg_gg82563_80003es2lan - Read GG82563 PHY register
- * @hw: pointer to the HW structure
- * @offset: offset of the register to read
- * @data: pointer to the data returned from the operation
- *
- * Read the GG82563 PHY register.
- **/
-static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
- u32 offset, u16 *data)
-{
- s32 ret_val;
- u32 page_select;
- u16 temp;
-
- ret_val = e1000_acquire_phy_80003es2lan(hw);
- if (ret_val)
- return ret_val;
-
- /* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- page_select = GG82563_PHY_PAGE_SELECT;
- } else {
- /*
- * Use Alternative Page Select register to access
- * registers 30 and 31
- */
- page_select = GG82563_PHY_PAGE_SELECT_ALT;
- }
-
- temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
- if (ret_val) {
- e1000_release_phy_80003es2lan(hw);
- return ret_val;
- }
-
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
- /*
- * The "ready" bit in the MDIC register may be incorrectly set
- * before the device has completed the "Page Select" MDI
- * transaction. So we wait 200us after each MDI command...
- */
- udelay(200);
-
- /* ...and verify the command was successful. */
- ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
-
- if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
- ret_val = -E1000_ERR_PHY;
- e1000_release_phy_80003es2lan(hw);
- return ret_val;
- }
-
- udelay(200);
-
- ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
-
- udelay(200);
- } else {
- ret_val = e1000e_read_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
- }
-
- e1000_release_phy_80003es2lan(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_write_phy_reg_gg82563_80003es2lan - Write GG82563 PHY register
- * @hw: pointer to the HW structure
- * @offset: offset of the register to read
- * @data: value to write to the register
- *
- * Write to the GG82563 PHY register.
- **/
-static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
- u32 offset, u16 data)
-{
- s32 ret_val;
- u32 page_select;
- u16 temp;
-
- ret_val = e1000_acquire_phy_80003es2lan(hw);
- if (ret_val)
- return ret_val;
-
- /* Select Configuration Page */
- if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
- page_select = GG82563_PHY_PAGE_SELECT;
- } else {
- /*
- * Use Alternative Page Select register to access
- * registers 30 and 31
- */
- page_select = GG82563_PHY_PAGE_SELECT_ALT;
- }
-
- temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
- ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
- if (ret_val) {
- e1000_release_phy_80003es2lan(hw);
- return ret_val;
- }
-
- if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
- /*
- * The "ready" bit in the MDIC register may be incorrectly set
- * before the device has completed the "Page Select" MDI
- * transaction. So we wait 200us after each MDI command...
- */
- udelay(200);
-
- /* ...and verify the command was successful. */
- ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
-
- if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
- e1000_release_phy_80003es2lan(hw);
- return -E1000_ERR_PHY;
- }
-
- udelay(200);
-
- ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
-
- udelay(200);
- } else {
- ret_val = e1000e_write_phy_reg_mdic(hw,
- MAX_PHY_REG_ADDRESS & offset,
- data);
- }
-
- e1000_release_phy_80003es2lan(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_write_nvm_80003es2lan - Write to ESB2 NVM
- * @hw: pointer to the HW structure
- * @offset: offset of the register to read
- * @words: number of words to write
- * @data: buffer of data to write to the NVM
- *
- * Write "words" of data to the ESB2 NVM.
- **/
-static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- return e1000e_write_nvm_spi(hw, offset, words, data);
-}
-
-/**
- * e1000_get_cfg_done_80003es2lan - Wait for configuration to complete
- * @hw: pointer to the HW structure
- *
- * Wait a specific amount of time for manageability processes to complete.
- * This is a function pointer entry point called by the phy module.
- **/
-static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
-{
- s32 timeout = PHY_CFG_TIMEOUT;
- u32 mask = E1000_NVM_CFG_DONE_PORT_0;
-
- if (hw->bus.func == 1)
- mask = E1000_NVM_CFG_DONE_PORT_1;
-
- while (timeout) {
- if (er32(EEMNGCTL) & mask)
- break;
- usleep_range(1000, 2000);
- timeout--;
- }
- if (!timeout) {
- e_dbg("MNG configuration cycle has not completed.\n");
- return -E1000_ERR_RESET;
- }
-
- return 0;
-}
-
-/**
- * e1000_phy_force_speed_duplex_80003es2lan - Force PHY speed and duplex
- * @hw: pointer to the HW structure
- *
- * Force the speed and duplex settings onto the PHY. This is a
- * function pointer entry point called by the phy module.
- **/
-static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- /*
- * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_AUTO;
- ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- e_dbg("GG82563 PSCR: %X\n", phy_data);
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
-
- /* Reset the phy to commit changes. */
- phy_data |= MII_CR_RESET;
-
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- udelay(1);
-
- if (hw->phy.autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link "
- "on GG82563 phy.\n");
-
- ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
- if (ret_val)
- return ret_val;
-
- if (!link) {
- /*
- * We didn't get link.
- * Reset the DSP and cross our fingers.
- */
- ret_val = e1000e_phy_reset_dsp(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /*
- * Resetting the phy means we need to verify the TX_CLK corresponds
- * to the link speed. 10Mbps -> 2.5MHz, else 25MHz.
- */
- phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
- if (hw->mac.forced_speed_duplex & E1000_ALL_10_SPEED)
- phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5;
- else
- phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
-
- /*
- * In addition, we must re-enable CRS on Tx for both half and full
- * duplex.
- */
- phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
- ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
-
- return ret_val;
-}
-
-/**
- * e1000_get_cable_length_80003es2lan - Set approximate cable length
- * @hw: pointer to the HW structure
- *
- * Find the approximate cable length as measured by the GG82563 PHY.
- * This is a function pointer entry point called by the phy module.
- **/
-static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 phy_data, index;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
- if (ret_val)
- goto out;
-
- index = phy_data & GG82563_DSPD_CABLE_LENGTH;
-
- if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
- phy->min_cable_length = e1000_gg82563_cable_length_table[index];
- phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
-
- phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_get_link_up_info_80003es2lan - Report speed and duplex
- * @hw: pointer to the HW structure
- * @speed: pointer to speed buffer
- * @duplex: pointer to duplex buffer
- *
- * Retrieve the current speed and duplex configuration.
- **/
-static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
-{
- s32 ret_val;
-
- if (hw->phy.media_type == e1000_media_type_copper) {
- ret_val = e1000e_get_speed_and_duplex_copper(hw,
- speed,
- duplex);
- hw->phy.ops.cfg_on_link_up(hw);
- } else {
- ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
- speed,
- duplex);
- }
-
- return ret_val;
-}
-
-/**
- * e1000_reset_hw_80003es2lan - Reset the ESB2 controller
- * @hw: pointer to the HW structure
- *
- * Perform a global reset to the ESB2 controller.
- **/
-static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
-
- /*
- * Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- ret_val = e1000e_disable_pcie_master(hw);
- if (ret_val)
- e_dbg("PCI-E Master disable polling has failed.\n");
-
- e_dbg("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
- e1e_flush();
-
- usleep_range(10000, 20000);
-
- ctrl = er32(CTRL);
-
- ret_val = e1000_acquire_phy_80003es2lan(hw);
- e_dbg("Issuing a global reset to MAC\n");
- ew32(CTRL, ctrl | E1000_CTRL_RST);
- e1000_release_phy_80003es2lan(hw);
-
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val)
- /* We don't want to continue accessing MAC registers. */
- return ret_val;
-
- /* Clear any pending interrupt events. */
- ew32(IMC, 0xffffffff);
- er32(ICR);
-
- ret_val = e1000_check_alt_mac_addr_generic(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_init_hw_80003es2lan - Initialize the ESB2 controller
- * @hw: pointer to the HW structure
- *
- * Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
- **/
-static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 reg_data;
- s32 ret_val;
- u16 kum_reg_data;
- u16 i;
-
- e1000_initialize_hw_bits_80003es2lan(hw);
-
- /* Initialize identification LED */
- ret_val = e1000e_id_led_init(hw);
- if (ret_val)
- e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
-
- /* Disabling VLAN filtering */
- e_dbg("Initializing the IEEE VLAN\n");
- mac->ops.clear_vfta(hw);
-
- /* Setup the receive address. */
- e1000e_init_rx_addrs(hw, mac->rar_entry_count);
-
- /* Zero out the Multicast HASH table */
- e_dbg("Zeroing the MTA\n");
- for (i = 0; i < mac->mta_reg_count; i++)
- E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-
- /* Setup link and flow control */
- ret_val = e1000e_setup_link(hw);
-
- /* Disable IBIST slave mode (far-end loopback) */
- e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- &kum_reg_data);
- kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
- e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- kum_reg_data);
-
- /* Set the transmit descriptor write-back policy */
- reg_data = er32(TXDCTL(0));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL(0), reg_data);
-
- /* ...for both queues. */
- reg_data = er32(TXDCTL(1));
- reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
- ew32(TXDCTL(1), reg_data);
-
- /* Enable retransmit on late collisions */
- reg_data = er32(TCTL);
- reg_data |= E1000_TCTL_RTLC;
- ew32(TCTL, reg_data);
-
- /* Configure Gigabit Carry Extend Padding */
- reg_data = er32(TCTL_EXT);
- reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
- reg_data |= DEFAULT_TCTL_EXT_GCEX_80003ES2LAN;
- ew32(TCTL_EXT, reg_data);
-
- /* Configure Transmit Inter-Packet Gap */
- reg_data = er32(TIPG);
- reg_data &= ~E1000_TIPG_IPGT_MASK;
- reg_data |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
- ew32(TIPG, reg_data);
-
- reg_data = E1000_READ_REG_ARRAY(hw, E1000_FFLT, 0x0001);
- reg_data &= ~0x00100000;
- E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data);
-
- /* default to true to enable the MDIC W/A */
- hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
-
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET >>
- E1000_KMRNCTRLSTA_OFFSET_SHIFT,
- &i);
- if (!ret_val) {
- if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
- E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
- hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
- }
-
- /*
- * Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- e1000_clear_hw_cntrs_80003es2lan(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_initialize_hw_bits_80003es2lan - Init hw bits of ESB2
- * @hw: pointer to the HW structure
- *
- * Initializes required hardware-dependent bits needed for normal operation.
- **/
-static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
-{
- u32 reg;
-
- /* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL(0));
- reg |= (1 << 22);
- ew32(TXDCTL(0), reg);
-
- /* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL(1));
- reg |= (1 << 22);
- ew32(TXDCTL(1), reg);
-
- /* Transmit Arbitration Control 0 */
- reg = er32(TARC(0));
- reg &= ~(0xF << 27); /* 30:27 */
- if (hw->phy.media_type != e1000_media_type_copper)
- reg &= ~(1 << 20);
- ew32(TARC(0), reg);
-
- /* Transmit Arbitration Control 1 */
- reg = er32(TARC(1));
- if (er32(TCTL) & E1000_TCTL_MULR)
- reg &= ~(1 << 28);
- else
- reg |= (1 << 28);
- ew32(TARC(1), reg);
-}
-
-/**
- * e1000_copper_link_setup_gg82563_80003es2lan - Configure GG82563 Link
- * @hw: pointer to the HW structure
- *
- * Setup some GG82563 PHY registers for obtaining link
- **/
-static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u32 ctrl_ext;
- u16 data;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
- /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
- data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
-
- ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
- if (ret_val)
- return ret_val;
-
- /*
- * Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
-
- switch (phy->mdix) {
- case 1:
- data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
- break;
- case 2:
- data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
- break;
- case 0:
- default:
- data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
- break;
- }
-
- /*
- * Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
- if (phy->disable_polarity_correction)
- data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
-
- ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
- if (ret_val)
- return ret_val;
-
- /* SW Reset the PHY so all changes take effect */
- ret_val = e1000e_commit_phy(hw);
- if (ret_val) {
- e_dbg("Error Resetting the PHY\n");
- return ret_val;
- }
-
- /* Bypass Rx and Tx FIFO's */
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
- E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
- E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- &data);
- if (ret_val)
- return ret_val;
- data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
- data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
- ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
- if (ret_val)
- return ret_val;
-
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
- ew32(CTRL_EXT, ctrl_ext);
-
- ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- /*
- * Do not init these registers when the HW is in IAMT mode, since the
- * firmware will have already initialized them. We only initialize
- * them if the HW is not in IAMT mode.
- */
- if (!e1000e_check_mng_mode(hw)) {
- /* Enable Electrical Idle on the PHY */
- data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
- ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
- if (ret_val)
- return ret_val;
- }
-
- /*
- * Workaround: Disable padding in Kumeran interface in the MAC
- * and in the PHY to avoid CRC errors.
- */
- ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data |= GG82563_ICR_DIS_PADDING;
- ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
- if (ret_val)
- return ret_val;
-
- return 0;
-}
-
-/**
- * e1000_setup_copper_link_80003es2lan - Setup Copper Link for ESB2
- * @hw: pointer to the HW structure
- *
- * Essentially a wrapper for setting up all things "copper" related.
- * This is a function pointer entry point called by the mac module.
- **/
-static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 reg_data;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ew32(CTRL, ctrl);
-
- /*
- * Set the mac to wait the maximum time between each
- * iteration and increase the max iterations when
- * polling the phy; this fixes erroneous timeouts at 10Mbps.
- */
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
- 0xFFFF);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- ®_data);
- if (ret_val)
- return ret_val;
- reg_data |= 0x3F;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
- reg_data);
- if (ret_val)
- return ret_val;
- ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- ®_data);
- if (ret_val)
- return ret_val;
- reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000_copper_link_setup_gg82563_80003es2lan(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000e_setup_copper_link(hw);
-
- return 0;
-}
-
-/**
- * e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
- * @hw: pointer to the HW structure
- * @duplex: current duplex setting
- *
- * Configure the KMRN interface by applying last minute quirks for
- * 10/100 operation.
- **/
-static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 speed;
- u16 duplex;
-
- if (hw->phy.media_type == e1000_media_type_copper) {
- ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
- &duplex);
- if (ret_val)
- return ret_val;
-
- if (speed == SPEED_1000)
- ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw);
- else
- ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, duplex);
- }
-
- return ret_val;
-}
-
-/**
- * e1000_cfg_kmrn_10_100_80003es2lan - Apply "quirks" for 10/100 operation
- * @hw: pointer to the HW structure
- * @duplex: current duplex setting
- *
- * Configure the KMRN interface by applying last minute quirks for
- * 10/100 operation.
- **/
-static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
-{
- s32 ret_val;
- u32 tipg;
- u32 i = 0;
- u16 reg_data, reg_data2;
-
- reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
-
- /* Configure Transmit Inter-Packet Gap */
- tipg = er32(TIPG);
- tipg &= ~E1000_TIPG_IPGT_MASK;
- tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
- ew32(TIPG, tipg);
-
- do {
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
- if (ret_val)
- return ret_val;
- i++;
- } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
-
- if (duplex == HALF_DUPLEX)
- reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
- else
- reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
-
- ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
-
- return 0;
-}
-
-/**
- * e1000_cfg_kmrn_1000_80003es2lan - Apply "quirks" for gigabit operation
- * @hw: pointer to the HW structure
- *
- * Configure the KMRN interface by applying last minute quirks for
- * gigabit operation.
- **/
-static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 reg_data, reg_data2;
- u32 tipg;
- u32 i = 0;
-
- reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
- ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
- E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
- reg_data);
- if (ret_val)
- return ret_val;
-
- /* Configure Transmit Inter-Packet Gap */
- tipg = er32(TIPG);
- tipg &= ~E1000_TIPG_IPGT_MASK;
- tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
- ew32(TIPG, tipg);
-
- do {
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
- if (ret_val)
- return ret_val;
- i++;
- } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
-
- reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
- ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
-
- return ret_val;
-}
-
-/**
- * e1000_read_kmrn_reg_80003es2lan - Read kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquire semaphore, then read the PHY register at offset
- * using the kumeran interface. The information retrieved is stored in data.
- * Release the semaphore before exiting.
- **/
-static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 *data)
-{
- u32 kmrnctrlsta;
- s32 ret_val = 0;
-
- ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
- if (ret_val)
- return ret_val;
-
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
- ew32(KMRNCTRLSTA, kmrnctrlsta);
- e1e_flush();
-
- udelay(2);
-
- kmrnctrlsta = er32(KMRNCTRLSTA);
- *data = (u16)kmrnctrlsta;
-
- e1000_release_mac_csr_80003es2lan(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_write_kmrn_reg_80003es2lan - Write kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquire semaphore, then write the data to PHY register
- * at the offset using the kumeran interface. Release semaphore
- * before exiting.
- **/
-static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
- u16 data)
-{
- u32 kmrnctrlsta;
- s32 ret_val = 0;
-
- ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
- if (ret_val)
- return ret_val;
-
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
- ew32(KMRNCTRLSTA, kmrnctrlsta);
- e1e_flush();
-
- udelay(2);
-
- e1000_release_mac_csr_80003es2lan(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_read_mac_addr_80003es2lan - Read device MAC address
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- /*
- * If there's an alternate MAC address place it in RAR0
- * so that it will override the Si installed default perm
- * address.
- */
- ret_val = e1000_check_alt_mac_addr_generic(hw);
- if (ret_val)
- goto out;
-
- ret_val = e1000_read_mac_addr_generic(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, remove the link.
- **/
-static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw)
-{
- /* If the management interface is not enabled, then power down */
- if (!(hw->mac.ops.check_mng_mode(hw) ||
- hw->phy.ops.check_reset_block(hw)))
- e1000_power_down_phy_copper(hw);
-}
-
-/**
- * e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
- * @hw: pointer to the HW structure
- *
- * Clears the hardware counters by reading the counter registers.
- **/
-static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
-{
- e1000e_clear_hw_cntrs_base(hw);
-
- er32(PRC64);
- er32(PRC127);
- er32(PRC255);
- er32(PRC511);
- er32(PRC1023);
- er32(PRC1522);
- er32(PTC64);
- er32(PTC127);
- er32(PTC255);
- er32(PTC511);
- er32(PTC1023);
- er32(PTC1522);
-
- er32(ALGNERRC);
- er32(RXERRC);
- er32(TNCRS);
- er32(CEXTERR);
- er32(TSCTC);
- er32(TSCTFC);
-
- er32(MGTPRC);
- er32(MGTPDC);
- er32(MGTPTC);
-
- er32(IAC);
- er32(ICRXOC);
-
- er32(ICRXPTC);
- er32(ICRXATC);
- er32(ICTXPTC);
- er32(ICTXATC);
- er32(ICTXQEC);
- er32(ICTXQMTC);
- er32(ICRXDMTC);
-}
-
-static struct e1000_mac_operations es2_mac_ops = {
- .read_mac_addr = e1000_read_mac_addr_80003es2lan,
- .id_led_init = e1000e_id_led_init,
- .blink_led = e1000e_blink_led_generic,
- .check_mng_mode = e1000e_check_mng_mode_generic,
- /* check_for_link dependent on media type */
- .cleanup_led = e1000e_cleanup_led_generic,
- .clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan,
- .get_bus_info = e1000e_get_bus_info_pcie,
- .set_lan_id = e1000_set_lan_id_multi_port_pcie,
- .get_link_up_info = e1000_get_link_up_info_80003es2lan,
- .led_on = e1000e_led_on_generic,
- .led_off = e1000e_led_off_generic,
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .write_vfta = e1000_write_vfta_generic,
- .clear_vfta = e1000_clear_vfta_generic,
- .reset_hw = e1000_reset_hw_80003es2lan,
- .init_hw = e1000_init_hw_80003es2lan,
- .setup_link = e1000e_setup_link,
- /* setup_physical_interface dependent on media type */
- .setup_led = e1000e_setup_led_generic,
-};
-
-static struct e1000_phy_operations es2_phy_ops = {
- .acquire = e1000_acquire_phy_80003es2lan,
- .check_polarity = e1000_check_polarity_m88,
- .check_reset_block = e1000e_check_reset_block_generic,
- .commit = e1000e_phy_sw_reset,
- .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
- .get_cfg_done = e1000_get_cfg_done_80003es2lan,
- .get_cable_length = e1000_get_cable_length_80003es2lan,
- .get_info = e1000e_get_phy_info_m88,
- .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
- .release = e1000_release_phy_80003es2lan,
- .reset = e1000e_phy_hw_reset_generic,
- .set_d0_lplu_state = NULL,
- .set_d3_lplu_state = e1000e_set_d3_lplu_state,
- .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
- .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
-};
-
-static struct e1000_nvm_operations es2_nvm_ops = {
- .acquire = e1000_acquire_nvm_80003es2lan,
- .read = e1000e_read_nvm_eerd,
- .release = e1000_release_nvm_80003es2lan,
- .update = e1000e_update_nvm_checksum_generic,
- .valid_led_default = e1000e_valid_led_default,
- .validate = e1000e_validate_nvm_checksum_generic,
- .write = e1000_write_nvm_80003es2lan,
-};
-
-struct e1000_info e1000_es2_info = {
- .mac = e1000_80003es2lan,
- .flags = FLAG_HAS_HW_VLAN_FILTER
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_HAS_WOL
- | FLAG_APME_IN_CTRL3
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_RX_NEEDS_RESTART /* errata */
- | FLAG_TARC_SET_BIT_ZERO /* errata */
- | FLAG_APME_CHECK_PORT_B
- | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
- | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
- .flags2 = FLAG2_DMA_BURST,
- .pba = 38,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_80003es2lan,
- .mac_ops = &es2_mac_ops,
- .phy_ops = &es2_phy_ops,
- .nvm_ops = &es2_nvm_ops,
-};
-
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for e1000 */
-
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include "e1000.h"
-
-enum {NETDEV_STATS, E1000_STATS};
-
-struct e1000_stats {
- char stat_string[ETH_GSTRING_LEN];
- int type;
- int sizeof_stat;
- int stat_offset;
-};
-
-#define E1000_STAT(str, m) { \
- .stat_string = str, \
- .type = E1000_STATS, \
- .sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
- .stat_offset = offsetof(struct e1000_adapter, m) }
-#define E1000_NETDEV_STAT(str, m) { \
- .stat_string = str, \
- .type = NETDEV_STATS, \
- .sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \
- .stat_offset = offsetof(struct rtnl_link_stats64, m) }
-
-static const struct e1000_stats e1000_gstrings_stats[] = {
- E1000_STAT("rx_packets", stats.gprc),
- E1000_STAT("tx_packets", stats.gptc),
- E1000_STAT("rx_bytes", stats.gorc),
- E1000_STAT("tx_bytes", stats.gotc),
- E1000_STAT("rx_broadcast", stats.bprc),
- E1000_STAT("tx_broadcast", stats.bptc),
- E1000_STAT("rx_multicast", stats.mprc),
- E1000_STAT("tx_multicast", stats.mptc),
- E1000_NETDEV_STAT("rx_errors", rx_errors),
- E1000_NETDEV_STAT("tx_errors", tx_errors),
- E1000_NETDEV_STAT("tx_dropped", tx_dropped),
- E1000_STAT("multicast", stats.mprc),
- E1000_STAT("collisions", stats.colc),
- E1000_NETDEV_STAT("rx_length_errors", rx_length_errors),
- E1000_NETDEV_STAT("rx_over_errors", rx_over_errors),
- E1000_STAT("rx_crc_errors", stats.crcerrs),
- E1000_NETDEV_STAT("rx_frame_errors", rx_frame_errors),
- E1000_STAT("rx_no_buffer_count", stats.rnbc),
- E1000_STAT("rx_missed_errors", stats.mpc),
- E1000_STAT("tx_aborted_errors", stats.ecol),
- E1000_STAT("tx_carrier_errors", stats.tncrs),
- E1000_NETDEV_STAT("tx_fifo_errors", tx_fifo_errors),
- E1000_NETDEV_STAT("tx_heartbeat_errors", tx_heartbeat_errors),
- E1000_STAT("tx_window_errors", stats.latecol),
- E1000_STAT("tx_abort_late_coll", stats.latecol),
- E1000_STAT("tx_deferred_ok", stats.dc),
- E1000_STAT("tx_single_coll_ok", stats.scc),
- E1000_STAT("tx_multi_coll_ok", stats.mcc),
- E1000_STAT("tx_timeout_count", tx_timeout_count),
- E1000_STAT("tx_restart_queue", restart_queue),
- E1000_STAT("rx_long_length_errors", stats.roc),
- E1000_STAT("rx_short_length_errors", stats.ruc),
- E1000_STAT("rx_align_errors", stats.algnerrc),
- E1000_STAT("tx_tcp_seg_good", stats.tsctc),
- E1000_STAT("tx_tcp_seg_failed", stats.tsctfc),
- E1000_STAT("rx_flow_control_xon", stats.xonrxc),
- E1000_STAT("rx_flow_control_xoff", stats.xoffrxc),
- E1000_STAT("tx_flow_control_xon", stats.xontxc),
- E1000_STAT("tx_flow_control_xoff", stats.xofftxc),
- E1000_STAT("rx_long_byte_count", stats.gorc),
- E1000_STAT("rx_csum_offload_good", hw_csum_good),
- E1000_STAT("rx_csum_offload_errors", hw_csum_err),
- E1000_STAT("rx_header_split", rx_hdr_split),
- E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
- E1000_STAT("tx_smbus", stats.mgptc),
- E1000_STAT("rx_smbus", stats.mgprc),
- E1000_STAT("dropped_smbus", stats.mgpdc),
- E1000_STAT("rx_dma_failed", rx_dma_failed),
- E1000_STAT("tx_dma_failed", tx_dma_failed),
-};
-
-#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
-#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
-static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
- "Register test (offline)", "Eeprom test (offline)",
- "Interrupt test (offline)", "Loopback test (offline)",
- "Link test (on/offline)"
-};
-#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
-
-static int e1000_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 speed;
-
- if (hw->phy.media_type == e1000_media_type_copper) {
-
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg |
- SUPPORTED_TP);
- if (hw->phy.type == e1000_phy_ife)
- ecmd->supported &= ~SUPPORTED_1000baseT_Full;
- ecmd->advertising = ADVERTISED_TP;
-
- if (hw->mac.autoneg == 1) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- /* the e1000 autoneg seems to match ethtool nicely */
- ecmd->advertising |= hw->phy.autoneg_advertised;
- }
-
- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy.addr;
- ecmd->transceiver = XCVR_INTERNAL;
-
- } else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
-
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg);
-
- ecmd->port = PORT_FIBRE;
- ecmd->transceiver = XCVR_EXTERNAL;
- }
-
- speed = -1;
- ecmd->duplex = -1;
-
- if (netif_running(netdev)) {
- if (netif_carrier_ok(netdev)) {
- speed = adapter->link_speed;
- ecmd->duplex = adapter->link_duplex - 1;
- }
- } else {
- u32 status = er32(STATUS);
- if (status & E1000_STATUS_LU) {
- if (status & E1000_STATUS_SPEED_1000)
- speed = SPEED_1000;
- else if (status & E1000_STATUS_SPEED_100)
- speed = SPEED_100;
- else
- speed = SPEED_10;
-
- if (status & E1000_STATUS_FD)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- }
- }
-
- ethtool_cmd_speed_set(ecmd, speed);
- ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
- hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
-
- /* MDI-X => 2; MDI =>1; Invalid =>0 */
- if ((hw->phy.media_type == e1000_media_type_copper) &&
- netif_carrier_ok(netdev))
- ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
- ETH_TP_MDI;
- else
- ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
-
- return 0;
-}
-
-static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
-{
- struct e1000_mac_info *mac = &adapter->hw.mac;
-
- mac->autoneg = 0;
-
- /* Make sure dplx is at most 1 bit and lsb of speed is not set
- * for the switch() below to work */
- if ((spd & 1) || (dplx & ~1))
- goto err_inval;
-
- /* Fiber NICs only allow 1000 gbps Full duplex */
- if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL) {
- goto err_inval;
- }
-
- switch (spd + dplx) {
- case SPEED_10 + DUPLEX_HALF:
- mac->forced_speed_duplex = ADVERTISE_10_HALF;
- break;
- case SPEED_10 + DUPLEX_FULL:
- mac->forced_speed_duplex = ADVERTISE_10_FULL;
- break;
- case SPEED_100 + DUPLEX_HALF:
- mac->forced_speed_duplex = ADVERTISE_100_HALF;
- break;
- case SPEED_100 + DUPLEX_FULL:
- mac->forced_speed_duplex = ADVERTISE_100_FULL;
- break;
- case SPEED_1000 + DUPLEX_FULL:
- mac->autoneg = 1;
- adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
- break;
- case SPEED_1000 + DUPLEX_HALF: /* not supported */
- default:
- goto err_inval;
- }
- return 0;
-
-err_inval:
- e_err("Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
-}
-
-static int e1000_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- /*
- * When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed
- */
- if (e1000_check_reset_block(hw)) {
- e_err("Cannot change link characteristics when SoL/IDER is "
- "active.\n");
- return -EINVAL;
- }
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
-
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- hw->mac.autoneg = 1;
- if (hw->phy.media_type == e1000_media_type_fiber)
- hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg;
- else
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
- ecmd->advertising = hw->phy.autoneg_advertised;
- if (adapter->fc_autoneg)
- hw->fc.requested_mode = e1000_fc_default;
- } else {
- u32 speed = ethtool_cmd_speed(ecmd);
- if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
- clear_bit(__E1000_RESETTING, &adapter->state);
- return -EINVAL;
- }
- }
-
- /* reset the link */
-
- if (netif_running(adapter->netdev)) {
- e1000e_down(adapter);
- e1000e_up(adapter);
- } else {
- e1000e_reset(adapter);
- }
-
- clear_bit(__E1000_RESETTING, &adapter->state);
- return 0;
-}
-
-static void e1000_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-
- if (hw->fc.current_mode == e1000_fc_rx_pause) {
- pause->rx_pause = 1;
- } else if (hw->fc.current_mode == e1000_fc_tx_pause) {
- pause->tx_pause = 1;
- } else if (hw->fc.current_mode == e1000_fc_full) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
- }
-}
-
-static int e1000_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int retval = 0;
-
- adapter->fc_autoneg = pause->autoneg;
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
-
- if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- hw->fc.requested_mode = e1000_fc_default;
- if (netif_running(adapter->netdev)) {
- e1000e_down(adapter);
- e1000e_up(adapter);
- } else {
- e1000e_reset(adapter);
- }
- } else {
- if (pause->rx_pause && pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_none;
-
- hw->fc.current_mode = hw->fc.requested_mode;
-
- if (hw->phy.media_type == e1000_media_type_fiber) {
- retval = hw->mac.ops.setup_link(hw);
- /* implicit goto out */
- } else {
- retval = e1000e_force_mac_fc(hw);
- if (retval)
- goto out;
- e1000e_set_fc_watermarks(hw);
- }
- }
-
-out:
- clear_bit(__E1000_RESETTING, &adapter->state);
- return retval;
-}
-
-static u32 e1000_get_rx_csum(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- return adapter->flags & FLAG_RX_CSUM_ENABLED;
-}
-
-static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (data)
- adapter->flags |= FLAG_RX_CSUM_ENABLED;
- else
- adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
-
- if (netif_running(netdev))
- e1000e_reinit_locked(adapter);
- else
- e1000e_reset(adapter);
- return 0;
-}
-
-static u32 e1000_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
-static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
-{
- if (data)
- netdev->features |= NETIF_F_HW_CSUM;
- else
- netdev->features &= ~NETIF_F_HW_CSUM;
-
- return 0;
-}
-
-static int e1000_set_tso(struct net_device *netdev, u32 data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (data) {
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- } else {
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- }
-
- adapter->flags |= FLAG_TSO_FORCE;
- return 0;
-}
-
-static u32 e1000_get_msglevel(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void e1000_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-static int e1000_get_regs_len(struct net_device *netdev)
-{
-#define E1000_REGS_LEN 32 /* overestimate */
- return E1000_REGS_LEN * sizeof(u32);
-}
-
-static void e1000_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
- u16 phy_data;
-
- memset(p, 0, E1000_REGS_LEN * sizeof(u32));
-
- regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
- adapter->pdev->device;
-
- regs_buff[0] = er32(CTRL);
- regs_buff[1] = er32(STATUS);
-
- regs_buff[2] = er32(RCTL);
- regs_buff[3] = er32(RDLEN);
- regs_buff[4] = er32(RDH);
- regs_buff[5] = er32(RDT);
- regs_buff[6] = er32(RDTR);
-
- regs_buff[7] = er32(TCTL);
- regs_buff[8] = er32(TDLEN);
- regs_buff[9] = er32(TDH);
- regs_buff[10] = er32(TDT);
- regs_buff[11] = er32(TIDV);
-
- regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
-
- /* ethtool doesn't use anything past this point, so all this
- * code is likely legacy junk for apps that may or may not
- * exist */
- if (hw->phy.type == e1000_phy_m88) {
- e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- regs_buff[13] = (u32)phy_data; /* cable length */
- regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
- regs_buff[18] = regs_buff[13]; /* cable polarity */
- regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
- regs_buff[20] = regs_buff[17]; /* polarity correction */
- /* phy receive errors */
- regs_buff[22] = adapter->phy_stats.receive_errors;
- regs_buff[23] = regs_buff[13]; /* mdix mode */
- }
- regs_buff[21] = 0; /* was idle_errors */
- e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
- regs_buff[24] = (u32)phy_data; /* phy local receiver status */
- regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
-}
-
-static int e1000_get_eeprom_len(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- return adapter->hw.nvm.word_size * 2;
-}
-
-static int e1000_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- int first_word;
- int last_word;
- int ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-
- eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- if (hw->nvm.type == e1000_nvm_eeprom_spi) {
- ret_val = e1000_read_nvm(hw, first_word,
- last_word - first_word + 1,
- eeprom_buff);
- } else {
- for (i = 0; i < last_word - first_word + 1; i++) {
- ret_val = e1000_read_nvm(hw, first_word + i, 1,
- &eeprom_buff[i]);
- if (ret_val)
- break;
- }
- }
-
- if (ret_val) {
- /* a read error occurred, throw away the result */
- memset(eeprom_buff, 0xff, sizeof(u16) *
- (last_word - first_word + 1));
- } else {
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
- }
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
- kfree(eeprom_buff);
-
- return ret_val;
-}
-
-static int e1000_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- void *ptr;
- int max_len;
- int first_word;
- int last_word;
- int ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EOPNOTSUPP;
-
- if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
- return -EFAULT;
-
- if (adapter->flags & FLAG_READ_ONLY_NVM)
- return -EINVAL;
-
- max_len = hw->nvm.word_size * 2;
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ptr = (void *)eeprom_buff;
-
- if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
- ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
- ptr++;
- }
- if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
- ret_val = e1000_read_nvm(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
-
- if (ret_val)
- goto out;
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(ptr, bytes, eeprom->len);
-
- for (i = 0; i < last_word - first_word + 1; i++)
- eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
-
- ret_val = e1000_write_nvm(hw, first_word,
- last_word - first_word + 1, eeprom_buff);
-
- if (ret_val)
- goto out;
-
- /*
- * Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for applicable controllers
- */
- if ((first_word <= NVM_CHECKSUM_REG) ||
- (hw->mac.type == e1000_82583) ||
- (hw->mac.type == e1000_82574) ||
- (hw->mac.type == e1000_82573))
- ret_val = e1000e_update_nvm_checksum(hw);
-
-out:
- kfree(eeprom_buff);
- return ret_val;
-}
-
-static void e1000_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32];
-
- strncpy(drvinfo->driver, e1000e_driver_name,
- sizeof(drvinfo->driver) - 1);
- strncpy(drvinfo->version, e1000e_driver_version,
- sizeof(drvinfo->version) - 1);
-
- /*
- * EEPROM image version # is reported as firmware version # for
- * PCI-E controllers
- */
- snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
- (adapter->eeprom_vers & 0xF000) >> 12,
- (adapter->eeprom_vers & 0x0FF0) >> 4,
- (adapter->eeprom_vers & 0x000F));
-
- strncpy(drvinfo->fw_version, firmware_version,
- sizeof(drvinfo->fw_version) - 1);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info) - 1);
- drvinfo->regdump_len = e1000_get_regs_len(netdev);
- drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
-}
-
-static void e1000_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_ring *rx_ring = adapter->rx_ring;
-
- ring->rx_max_pending = E1000_MAX_RXD;
- ring->tx_max_pending = E1000_MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rx_ring->count;
- ring->tx_pending = tx_ring->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int e1000_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_ring *tx_ring, *tx_old;
- struct e1000_ring *rx_ring, *rx_old;
- int err;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
-
- if (netif_running(adapter->netdev))
- e1000e_down(adapter);
-
- tx_old = adapter->tx_ring;
- rx_old = adapter->rx_ring;
-
- err = -ENOMEM;
- tx_ring = kmemdup(tx_old, sizeof(struct e1000_ring), GFP_KERNEL);
- if (!tx_ring)
- goto err_alloc_tx;
-
- rx_ring = kmemdup(rx_old, sizeof(struct e1000_ring), GFP_KERNEL);
- if (!rx_ring)
- goto err_alloc_rx;
-
- adapter->tx_ring = tx_ring;
- adapter->rx_ring = rx_ring;
-
- rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
- rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
- rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
-
- tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
- tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
- tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if (netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
- err = e1000e_setup_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
- err = e1000e_setup_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /*
- * restore the old in order to free it,
- * then add in the new
- */
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- e1000e_free_rx_resources(adapter);
- e1000e_free_tx_resources(adapter);
- kfree(tx_old);
- kfree(rx_old);
- adapter->rx_ring = rx_ring;
- adapter->tx_ring = tx_ring;
- err = e1000e_up(adapter);
- if (err)
- goto err_setup;
- }
-
- clear_bit(__E1000_RESETTING, &adapter->state);
- return 0;
-err_setup_tx:
- e1000e_free_rx_resources(adapter);
-err_setup_rx:
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- kfree(rx_ring);
-err_alloc_rx:
- kfree(tx_ring);
-err_alloc_tx:
- e1000e_up(adapter);
-err_setup:
- clear_bit(__E1000_RESETTING, &adapter->state);
- return err;
-}
-
-static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
- int reg, int offset, u32 mask, u32 write)
-{
- u32 pat, val;
- static const u32 test[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
- E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
- (test[pat] & write));
- val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
- if (val != (test[pat] & write & mask)) {
- e_err("pattern test reg %04X failed: got 0x%08X "
- "expected 0x%08X\n", reg + offset, val,
- (test[pat] & write & mask));
- *data = reg;
- return 1;
- }
- }
- return 0;
-}
-
-static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
- int reg, u32 mask, u32 write)
-{
- u32 val;
- __ew32(&adapter->hw, reg, write & mask);
- val = __er32(&adapter->hw, reg);
- if ((write & mask) != (val & mask)) {
- e_err("set/check reg %04X test failed: got 0x%08X "
- "expected 0x%08X\n", reg, (val & mask), (write & mask));
- *data = reg;
- return 1;
- }
- return 0;
-}
-#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
- do { \
- if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
- return 1; \
- } while (0)
-#define REG_PATTERN_TEST(reg, mask, write) \
- REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
-
-#define REG_SET_AND_CHECK(reg, mask, write) \
- do { \
- if (reg_set_and_check(adapter, data, reg, mask, write)) \
- return 1; \
- } while (0)
-
-static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &adapter->hw.mac;
- u32 value;
- u32 before;
- u32 after;
- u32 i;
- u32 toggle;
- u32 mask;
-
- /*
- * The status register is Read Only, so a write should fail.
- * Some bits that get toggled are ignored.
- */
- switch (mac->type) {
- /* there are several bits on newer hardware that are r/w */
- case e1000_82571:
- case e1000_82572:
- case e1000_80003es2lan:
- toggle = 0x7FFFF3FF;
- break;
- default:
- toggle = 0x7FFFF033;
- break;
- }
-
- before = er32(STATUS);
- value = (er32(STATUS) & toggle);
- ew32(STATUS, toggle);
- after = er32(STATUS) & toggle;
- if (value != after) {
- e_err("failed STATUS register test got: 0x%08X expected: "
- "0x%08X\n", after, value);
- *data = 1;
- return 1;
- }
- /* restore previous status */
- ew32(STATUS, before);
-
- if (!(adapter->flags & FLAG_IS_ICH)) {
- REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
- }
-
- REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF);
- REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
- REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
- REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF);
-
- REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
-
- before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
- REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
- REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
-
- REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- if (!(adapter->flags & FLAG_IS_ICH))
- REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
- REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
- REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
- mask = 0x8003FFFF;
- switch (mac->type) {
- case e1000_ich10lan:
- case e1000_pchlan:
- case e1000_pch2lan:
- mask |= (1 << 18);
- break;
- default:
- break;
- }
- for (i = 0; i < mac->rar_entry_count; i++)
- REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
- mask, 0xFFFFFFFF);
-
- for (i = 0; i < mac->mta_reg_count; i++)
- REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
-
- *data = 0;
- return 0;
-}
-
-static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
-{
- u16 temp;
- u16 checksum = 0;
- u16 i;
-
- *data = 0;
- /* Read and add up the contents of the EEPROM */
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
- *data = 1;
- return *data;
- }
- checksum += temp;
- }
-
- /* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
- *data = 2;
-
- return *data;
-}
-
-static irqreturn_t e1000_test_intr(int irq, void *data)
-{
- struct net_device *netdev = (struct net_device *) data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->test_icr |= er32(ICR);
-
- return IRQ_HANDLED;
-}
-
-static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 mask;
- u32 shared_int = 1;
- u32 irq = adapter->pdev->irq;
- int i;
- int ret_val = 0;
- int int_mode = E1000E_INT_MODE_LEGACY;
-
- *data = 0;
-
- /* NOTE: we don't test MSI/MSI-X interrupts here, yet */
- if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
- int_mode = adapter->int_mode;
- e1000e_reset_interrupt_capability(adapter);
- adapter->int_mode = E1000E_INT_MODE_LEGACY;
- e1000e_set_interrupt_capability(adapter);
- }
- /* Hook up test interrupt handler just for this test */
- if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
- netdev)) {
- shared_int = 0;
- } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
- *data = 1;
- ret_val = -1;
- goto out;
- }
- e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
-
- /* Disable all the interrupts */
- ew32(IMC, 0xFFFFFFFF);
- e1e_flush();
- usleep_range(10000, 20000);
-
- /* Test each interrupt */
- for (i = 0; i < 10; i++) {
- /* Interrupt to test */
- mask = 1 << i;
-
- if (adapter->flags & FLAG_IS_ICH) {
- switch (mask) {
- case E1000_ICR_RXSEQ:
- continue;
- case 0x00000100:
- if (adapter->hw.mac.type == e1000_ich8lan ||
- adapter->hw.mac.type == e1000_ich9lan)
- continue;
- break;
- default:
- break;
- }
- }
-
- if (!shared_int) {
- /*
- * Disable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMC, mask);
- ew32(ICS, mask);
- e1e_flush();
- usleep_range(10000, 20000);
-
- if (adapter->test_icr & mask) {
- *data = 3;
- break;
- }
- }
-
- /*
- * Enable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was not posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMS, mask);
- ew32(ICS, mask);
- e1e_flush();
- usleep_range(10000, 20000);
-
- if (!(adapter->test_icr & mask)) {
- *data = 4;
- break;
- }
-
- if (!shared_int) {
- /*
- * Disable the other interrupts to be reported in
- * the cause register and then force the other
- * interrupts and see if any get posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- ew32(IMC, ~mask & 0x00007FFF);
- ew32(ICS, ~mask & 0x00007FFF);
- e1e_flush();
- usleep_range(10000, 20000);
-
- if (adapter->test_icr) {
- *data = 5;
- break;
- }
- }
- }
-
- /* Disable all the interrupts */
- ew32(IMC, 0xFFFFFFFF);
- e1e_flush();
- usleep_range(10000, 20000);
-
- /* Unhook test interrupt handler */
- free_irq(irq, netdev);
-
-out:
- if (int_mode == E1000E_INT_MODE_MSIX) {
- e1000e_reset_interrupt_capability(adapter);
- adapter->int_mode = int_mode;
- e1000e_set_interrupt_capability(adapter);
- }
-
- return ret_val;
-}
-
-static void e1000_free_desc_rings(struct e1000_adapter *adapter)
-{
- struct e1000_ring *tx_ring = &adapter->test_tx_ring;
- struct e1000_ring *rx_ring = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int i;
-
- if (tx_ring->desc && tx_ring->buffer_info) {
- for (i = 0; i < tx_ring->count; i++) {
- if (tx_ring->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- tx_ring->buffer_info[i].dma,
- tx_ring->buffer_info[i].length,
- DMA_TO_DEVICE);
- if (tx_ring->buffer_info[i].skb)
- dev_kfree_skb(tx_ring->buffer_info[i].skb);
- }
- }
-
- if (rx_ring->desc && rx_ring->buffer_info) {
- for (i = 0; i < rx_ring->count; i++) {
- if (rx_ring->buffer_info[i].dma)
- dma_unmap_single(&pdev->dev,
- rx_ring->buffer_info[i].dma,
- 2048, DMA_FROM_DEVICE);
- if (rx_ring->buffer_info[i].skb)
- dev_kfree_skb(rx_ring->buffer_info[i].skb);
- }
- }
-
- if (tx_ring->desc) {
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
- tx_ring->desc = NULL;
- }
- if (rx_ring->desc) {
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
- rx_ring->desc = NULL;
- }
-
- kfree(tx_ring->buffer_info);
- tx_ring->buffer_info = NULL;
- kfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-}
-
-static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
-{
- struct e1000_ring *tx_ring = &adapter->test_tx_ring;
- struct e1000_ring *rx_ring = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
- int i;
- int ret_val;
-
- /* Setup Tx descriptor ring and Tx buffers */
-
- if (!tx_ring->count)
- tx_ring->count = E1000_DEFAULT_TXD;
-
- tx_ring->buffer_info = kcalloc(tx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
- if (!(tx_ring->buffer_info)) {
- ret_val = 1;
- goto err_nomem;
- }
-
- tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
- tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
- &tx_ring->dma, GFP_KERNEL);
- if (!tx_ring->desc) {
- ret_val = 2;
- goto err_nomem;
- }
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
- ew32(TDBAH, ((u64) tx_ring->dma >> 32));
- ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
- ew32(TDH, 0);
- ew32(TDT, 0);
- ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
- E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
- E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
-
- for (i = 0; i < tx_ring->count; i++) {
- struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
- struct sk_buff *skb;
- unsigned int skb_size = 1024;
-
- skb = alloc_skb(skb_size, GFP_KERNEL);
- if (!skb) {
- ret_val = 3;
- goto err_nomem;
- }
- skb_put(skb, skb_size);
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[i].length = skb->len;
- tx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, skb->len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- tx_ring->buffer_info[i].dma)) {
- ret_val = 4;
- goto err_nomem;
- }
- tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
- tx_desc->lower.data = cpu_to_le32(skb->len);
- tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
- E1000_TXD_CMD_IFCS |
- E1000_TXD_CMD_RS);
- tx_desc->upper.data = 0;
- }
-
- /* Setup Rx descriptor ring and Rx buffers */
-
- if (!rx_ring->count)
- rx_ring->count = E1000_DEFAULT_RXD;
-
- rx_ring->buffer_info = kcalloc(rx_ring->count,
- sizeof(struct e1000_buffer),
- GFP_KERNEL);
- if (!(rx_ring->buffer_info)) {
- ret_val = 5;
- goto err_nomem;
- }
-
- rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
- rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
- &rx_ring->dma, GFP_KERNEL);
- if (!rx_ring->desc) {
- ret_val = 6;
- goto err_nomem;
- }
- rx_ring->next_to_use = 0;
- rx_ring->next_to_clean = 0;
-
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
- ew32(RDBAH, ((u64) rx_ring->dma >> 32));
- ew32(RDLEN, rx_ring->size);
- ew32(RDH, 0);
- ew32(RDT, 0);
- rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
- E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
- E1000_RCTL_SBP | E1000_RCTL_SECRC |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
- ew32(RCTL, rctl);
-
- for (i = 0; i < rx_ring->count; i++) {
- struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
- struct sk_buff *skb;
-
- skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
- if (!skb) {
- ret_val = 7;
- goto err_nomem;
- }
- skb_reserve(skb, NET_IP_ALIGN);
- rx_ring->buffer_info[i].skb = skb;
- rx_ring->buffer_info[i].dma =
- dma_map_single(&pdev->dev, skb->data, 2048,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- rx_ring->buffer_info[i].dma)) {
- ret_val = 8;
- goto err_nomem;
- }
- rx_desc->buffer_addr =
- cpu_to_le64(rx_ring->buffer_info[i].dma);
- memset(skb->data, 0x00, skb->len);
- }
-
- return 0;
-
-err_nomem:
- e1000_free_desc_rings(adapter);
- return ret_val;
-}
-
-static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
-{
- /* Write out to PHY registers 29 and 30 to disable the Receiver. */
- e1e_wphy(&adapter->hw, 29, 0x001F);
- e1e_wphy(&adapter->hw, 30, 0x8FFC);
- e1e_wphy(&adapter->hw, 29, 0x001A);
- e1e_wphy(&adapter->hw, 30, 0x8FF0);
-}
-
-static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_reg = 0;
- u16 phy_reg = 0;
- s32 ret_val = 0;
-
- hw->mac.autoneg = 0;
-
- if (hw->phy.type == e1000_phy_ife) {
- /* force 100, set loopback */
- e1e_wphy(hw, PHY_CONTROL, 0x6100);
-
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_100 |/* Force Speed to 100 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
-
- ew32(CTRL, ctrl_reg);
- e1e_flush();
- udelay(500);
-
- return 0;
- }
-
- /* Specific PHY configuration for loopback */
- switch (hw->phy.type) {
- case e1000_phy_m88:
- /* Auto-MDI/MDIX Off */
- e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
- /* reset to update Auto-MDI/MDIX */
- e1e_wphy(hw, PHY_CONTROL, 0x9140);
- /* autoneg off */
- e1e_wphy(hw, PHY_CONTROL, 0x8140);
- break;
- case e1000_phy_gg82563:
- e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
- break;
- case e1000_phy_bm:
- /* Set Default MAC Interface speed to 1GB */
- e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
- phy_reg &= ~0x0007;
- phy_reg |= 0x006;
- e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
- /* Assert SW reset for above settings to take effect */
- e1000e_commit_phy(hw);
- mdelay(1);
- /* Force Full Duplex */
- e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
- e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
- /* Set Link Up (in force link) */
- e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
- e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
- /* Force Link */
- e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
- e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
- /* Set Early Link Enable */
- e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
- e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
- break;
- case e1000_phy_82577:
- case e1000_phy_82578:
- /* Workaround: K1 must be disabled for stable 1Gbps operation */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val) {
- e_err("Cannot setup 1Gbps loopback.\n");
- return ret_val;
- }
- e1000_configure_k1_ich8lan(hw, false);
- hw->phy.ops.release(hw);
- break;
- case e1000_phy_82579:
- /* Disable PHY energy detect power down */
- e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
- e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
- /* Disable full chip energy detect */
- e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
- e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
- /* Enable loopback on the PHY */
-#define I82577_PHY_LBK_CTRL 19
- e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
- break;
- default:
- break;
- }
-
- /* force 1000, set loopback */
- e1e_wphy(hw, PHY_CONTROL, 0x4140);
- mdelay(250);
-
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg = er32(CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD); /* Force Duplex to FULL */
-
- if (adapter->flags & FLAG_IS_ICH)
- ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
-
- if (hw->phy.media_type == e1000_media_type_copper &&
- hw->phy.type == e1000_phy_m88) {
- ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
- } else {
- /*
- * Set the ILOS bit on the fiber Nic if half duplex link is
- * detected.
- */
- if ((er32(STATUS) & E1000_STATUS_FD) == 0)
- ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
- }
-
- ew32(CTRL, ctrl_reg);
-
- /*
- * Disable the receiver on the PHY so when a cable is plugged in, the
- * PHY does not begin to autoneg when a cable is reconnected to the NIC.
- */
- if (hw->phy.type == e1000_phy_m88)
- e1000_phy_disable_receiver(adapter);
-
- udelay(500);
-
- return 0;
-}
-
-static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl = er32(CTRL);
- int link = 0;
-
- /* special requirements for 82571/82572 fiber adapters */
-
- /*
- * jump through hoops to make sure link is up because serdes
- * link is hardwired up
- */
- ctrl |= E1000_CTRL_SLU;
- ew32(CTRL, ctrl);
-
- /* disable autoneg */
- ctrl = er32(TXCW);
- ctrl &= ~(1 << 31);
- ew32(TXCW, ctrl);
-
- link = (er32(STATUS) & E1000_STATUS_LU);
-
- if (!link) {
- /* set invert loss of signal */
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_ILOS;
- ew32(CTRL, ctrl);
- }
-
- /*
- * special write to serdes control register to enable SerDes analog
- * loopback
- */
-#define E1000_SERDES_LB_ON 0x410
- ew32(SCTL, E1000_SERDES_LB_ON);
- e1e_flush();
- usleep_range(10000, 20000);
-
- return 0;
-}
-
-/* only call this for fiber/serdes connections to es2lan */
-static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrlext = er32(CTRL_EXT);
- u32 ctrl = er32(CTRL);
-
- /*
- * save CTRL_EXT to restore later, reuse an empty variable (unused
- * on mac_type 80003es2lan)
- */
- adapter->tx_fifo_head = ctrlext;
-
- /* clear the serdes mode bits, putting the device into mac loopback */
- ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
- ew32(CTRL_EXT, ctrlext);
-
- /* force speed to 1000/FD, link up */
- ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
- E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* set mac loopback */
- ctrl = er32(RCTL);
- ctrl |= E1000_RCTL_LBM_MAC;
- ew32(RCTL, ctrl);
-
- /* set testing mode parameters (no need to reset later) */
-#define KMRNCTRLSTA_OPMODE (0x1F << 16)
-#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
- ew32(KMRNCTRLSTA,
- (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
-
- return 0;
-}
-
-static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes) {
- switch (hw->mac.type) {
- case e1000_80003es2lan:
- return e1000_set_es2lan_mac_loopback(adapter);
- break;
- case e1000_82571:
- case e1000_82572:
- return e1000_set_82571_fiber_loopback(adapter);
- break;
- default:
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_LBM_TCVR;
- ew32(RCTL, rctl);
- return 0;
- }
- } else if (hw->phy.media_type == e1000_media_type_copper) {
- return e1000_integrated_phy_loopback(adapter);
- }
-
- return 7;
-}
-
-static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
- u16 phy_reg;
-
- rctl = er32(RCTL);
- rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
- ew32(RCTL, rctl);
-
- switch (hw->mac.type) {
- case e1000_80003es2lan:
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes) {
- /* restore CTRL_EXT, stealing space from tx_fifo_head */
- ew32(CTRL_EXT, adapter->tx_fifo_head);
- adapter->tx_fifo_head = 0;
- }
- /* fall through */
- case e1000_82571:
- case e1000_82572:
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes) {
-#define E1000_SERDES_LB_OFF 0x400
- ew32(SCTL, E1000_SERDES_LB_OFF);
- e1e_flush();
- usleep_range(10000, 20000);
- break;
- }
- /* Fall Through */
- default:
- hw->mac.autoneg = 1;
- if (hw->phy.type == e1000_phy_gg82563)
- e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
- e1e_rphy(hw, PHY_CONTROL, &phy_reg);
- if (phy_reg & MII_CR_LOOPBACK) {
- phy_reg &= ~MII_CR_LOOPBACK;
- e1e_wphy(hw, PHY_CONTROL, phy_reg);
- e1000e_commit_phy(hw);
- }
- break;
- }
-}
-
-static void e1000_create_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- memset(skb->data, 0xFF, frame_size);
- frame_size &= ~1;
- memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
- memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
- memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
-}
-
-static int e1000_check_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- frame_size &= ~1;
- if (*(skb->data + 3) == 0xFF)
- if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF))
- return 0;
- return 13;
-}
-
-static int e1000_run_loopback_test(struct e1000_adapter *adapter)
-{
- struct e1000_ring *tx_ring = &adapter->test_tx_ring;
- struct e1000_ring *rx_ring = &adapter->test_rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
- int i, j, k, l;
- int lc;
- int good_cnt;
- int ret_val = 0;
- unsigned long time;
-
- ew32(RDT, rx_ring->count - 1);
-
- /*
- * Calculate the loop count based on the largest descriptor ring
- * The idea is to wrap the largest ring a number of times using 64
- * send/receive pairs during each loop
- */
-
- if (rx_ring->count <= tx_ring->count)
- lc = ((tx_ring->count / 64) * 2) + 1;
- else
- lc = ((rx_ring->count / 64) * 2) + 1;
-
- k = 0;
- l = 0;
- for (j = 0; j <= lc; j++) { /* loop count loop */
- for (i = 0; i < 64; i++) { /* send the packets */
- e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
- 1024);
- dma_sync_single_for_device(&pdev->dev,
- tx_ring->buffer_info[k].dma,
- tx_ring->buffer_info[k].length,
- DMA_TO_DEVICE);
- k++;
- if (k == tx_ring->count)
- k = 0;
- }
- ew32(TDT, k);
- e1e_flush();
- msleep(200);
- time = jiffies; /* set the start time for the receive */
- good_cnt = 0;
- do { /* receive the sent packets */
- dma_sync_single_for_cpu(&pdev->dev,
- rx_ring->buffer_info[l].dma, 2048,
- DMA_FROM_DEVICE);
-
- ret_val = e1000_check_lbtest_frame(
- rx_ring->buffer_info[l].skb, 1024);
- if (!ret_val)
- good_cnt++;
- l++;
- if (l == rx_ring->count)
- l = 0;
- /*
- * time + 20 msecs (200 msecs on 2.4) is more than
- * enough time to complete the receives, if it's
- * exceeded, break and error off
- */
- } while ((good_cnt < 64) && !time_after(jiffies, time + 20));
- if (good_cnt != 64) {
- ret_val = 13; /* ret_val is the same as mis-compare */
- break;
- }
- if (jiffies >= (time + 20)) {
- ret_val = 14; /* error code for time out error */
- break;
- }
- } /* end loop count loop */
- return ret_val;
-}
-
-static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
-{
- /*
- * PHY loopback cannot be performed if SoL/IDER
- * sessions are active
- */
- if (e1000_check_reset_block(&adapter->hw)) {
- e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
- *data = 0;
- goto out;
- }
-
- *data = e1000_setup_desc_rings(adapter);
- if (*data)
- goto out;
-
- *data = e1000_setup_loopback_test(adapter);
- if (*data)
- goto err_loopback;
-
- *data = e1000_run_loopback_test(adapter);
- e1000_loopback_cleanup(adapter);
-
-err_loopback:
- e1000_free_desc_rings(adapter);
-out:
- return *data;
-}
-
-static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- *data = 0;
- if (hw->phy.media_type == e1000_media_type_internal_serdes) {
- int i = 0;
- hw->mac.serdes_has_link = false;
-
- /*
- * On some blade server designs, link establishment
- * could take as long as 2-3 minutes
- */
- do {
- hw->mac.ops.check_for_link(hw);
- if (hw->mac.serdes_has_link)
- return *data;
- msleep(20);
- } while (i++ < 3750);
-
- *data = 1;
- } else {
- hw->mac.ops.check_for_link(hw);
- if (hw->mac.autoneg)
- /*
- * On some Phy/switch combinations, link establishment
- * can take a few seconds more than expected.
- */
- msleep(5000);
-
- if (!(er32(STATUS) & E1000_STATUS_LU))
- *data = 1;
- }
- return *data;
-}
-
-static int e1000e_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_TEST:
- return E1000_TEST_LEN;
- case ETH_SS_STATS:
- return E1000_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void e1000_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- u16 autoneg_advertised;
- u8 forced_speed_duplex;
- u8 autoneg;
- bool if_running = netif_running(netdev);
-
- set_bit(__E1000_TESTING, &adapter->state);
-
- if (!if_running) {
- /* Get control of and reset hardware */
- if (adapter->flags & FLAG_HAS_AMT)
- e1000e_get_hw_control(adapter);
-
- e1000e_power_up_phy(adapter);
-
- adapter->hw.phy.autoneg_wait_to_complete = 1;
- e1000e_reset(adapter);
- adapter->hw.phy.autoneg_wait_to_complete = 0;
- }
-
- if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- /* save speed, duplex, autoneg settings */
- autoneg_advertised = adapter->hw.phy.autoneg_advertised;
- forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
- autoneg = adapter->hw.mac.autoneg;
-
- e_info("offline testing starting\n");
-
- if (if_running)
- /* indicate we're in test mode */
- dev_close(netdev);
-
- if (e1000_reg_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000e_reset(adapter);
- if (e1000_eeprom_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000e_reset(adapter);
- if (e1000_intr_test(adapter, &data[2]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- e1000e_reset(adapter);
- if (e1000_loopback_test(adapter, &data[3]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* force this routine to wait until autoneg complete/timeout */
- adapter->hw.phy.autoneg_wait_to_complete = 1;
- e1000e_reset(adapter);
- adapter->hw.phy.autoneg_wait_to_complete = 0;
-
- if (e1000_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* restore speed, duplex, autoneg settings */
- adapter->hw.phy.autoneg_advertised = autoneg_advertised;
- adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
- adapter->hw.mac.autoneg = autoneg;
- e1000e_reset(adapter);
-
- clear_bit(__E1000_TESTING, &adapter->state);
- if (if_running)
- dev_open(netdev);
- } else {
- /* Online tests */
-
- e_info("online testing starting\n");
-
- /* register, eeprom, intr and loopback tests not run online */
- data[0] = 0;
- data[1] = 0;
- data[2] = 0;
- data[3] = 0;
-
- if (e1000_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- clear_bit(__E1000_TESTING, &adapter->state);
- }
-
- if (!if_running) {
- e1000e_reset(adapter);
-
- if (adapter->flags & FLAG_HAS_AMT)
- e1000e_release_hw_control(adapter);
- }
-
- msleep_interruptible(4 * 1000);
-}
-
-static void e1000_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- wol->supported = 0;
- wol->wolopts = 0;
-
- if (!(adapter->flags & FLAG_HAS_WOL) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return;
-
- wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC | WAKE_PHY;
-
- /* apply any specific unsupported masks here */
- if (adapter->flags & FLAG_NO_WAKE_UCAST) {
- wol->supported &= ~WAKE_UCAST;
-
- if (adapter->wol & E1000_WUFC_EX)
- e_err("Interface does not support directed (unicast) "
- "frame wake-up packets\n");
- }
-
- if (adapter->wol & E1000_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & E1000_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & E1000_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & E1000_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
- if (adapter->wol & E1000_WUFC_LNKC)
- wol->wolopts |= WAKE_PHY;
-}
-
-static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (!(adapter->flags & FLAG_HAS_WOL) ||
- !device_can_wakeup(&adapter->pdev->dev) ||
- (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
- WAKE_MAGIC | WAKE_PHY)))
- return -EOPNOTSUPP;
-
- /* these settings will always override what we currently have */
- adapter->wol = 0;
-
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= E1000_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= E1000_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= E1000_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= E1000_WUFC_MAG;
- if (wol->wolopts & WAKE_PHY)
- adapter->wol |= E1000_WUFC_LNKC;
-
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- return 0;
-}
-
-static int e1000_set_phys_id(struct net_device *netdev,
- enum ethtool_phys_id_state state)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- if (!hw->mac.ops.blink_led)
- return 2; /* cycle on/off twice per second */
-
- hw->mac.ops.blink_led(hw);
- break;
-
- case ETHTOOL_ID_INACTIVE:
- if (hw->phy.type == e1000_phy_ife)
- e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
- hw->mac.ops.led_off(hw);
- hw->mac.ops.cleanup_led(hw);
- break;
-
- case ETHTOOL_ID_ON:
- adapter->hw.mac.ops.led_on(&adapter->hw);
- break;
-
- case ETHTOOL_ID_OFF:
- adapter->hw.mac.ops.led_off(&adapter->hw);
- break;
- }
- return 0;
-}
-
-static int e1000_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->itr_setting <= 4)
- ec->rx_coalesce_usecs = adapter->itr_setting;
- else
- ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
-
- return 0;
-}
-
-static int e1000_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 4) &&
- (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- if (ec->rx_coalesce_usecs == 4) {
- adapter->itr = adapter->itr_setting = 4;
- } else if (ec->rx_coalesce_usecs <= 3) {
- adapter->itr = 20000;
- adapter->itr_setting = ec->rx_coalesce_usecs;
- } else {
- adapter->itr = (1000000 / ec->rx_coalesce_usecs);
- adapter->itr_setting = adapter->itr & ~3;
- }
-
- if (adapter->itr_setting != 0)
- ew32(ITR, 1000000000 / (adapter->itr * 256));
- else
- ew32(ITR, 0);
-
- return 0;
-}
-
-static int e1000_nway_reset(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (!netif_running(netdev))
- return -EAGAIN;
-
- if (!adapter->hw.mac.autoneg)
- return -EINVAL;
-
- e1000e_reinit_locked(adapter);
-
- return 0;
-}
-
-static void e1000_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats,
- u64 *data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct rtnl_link_stats64 net_stats;
- int i;
- char *p = NULL;
-
- e1000e_get_stats64(netdev, &net_stats);
- for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
- switch (e1000_gstrings_stats[i].type) {
- case NETDEV_STATS:
- p = (char *) &net_stats +
- e1000_gstrings_stats[i].stat_offset;
- break;
- case E1000_STATS:
- p = (char *) adapter +
- e1000_gstrings_stats[i].stat_offset;
- break;
- default:
- data[i] = 0;
- continue;
- }
-
- data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-}
-
-static void e1000_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, e1000_gstrings_test, sizeof(e1000_gstrings_test));
- break;
- case ETH_SS_STATS:
- for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
- memcpy(p, e1000_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-static int e1000e_set_flags(struct net_device *netdev, u32 data)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- bool need_reset = false;
- int rc;
-
- need_reset = (data & ETH_FLAG_RXVLAN) !=
- (netdev->features & NETIF_F_HW_VLAN_RX);
-
- rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
- ETH_FLAG_TXVLAN);
-
- if (rc)
- return rc;
-
- if (need_reset) {
- if (netif_running(netdev))
- e1000e_reinit_locked(adapter);
- else
- e1000e_reset(adapter);
- }
-
- return 0;
-}
-
-static const struct ethtool_ops e1000_ethtool_ops = {
- .get_settings = e1000_get_settings,
- .set_settings = e1000_set_settings,
- .get_drvinfo = e1000_get_drvinfo,
- .get_regs_len = e1000_get_regs_len,
- .get_regs = e1000_get_regs,
- .get_wol = e1000_get_wol,
- .set_wol = e1000_set_wol,
- .get_msglevel = e1000_get_msglevel,
- .set_msglevel = e1000_set_msglevel,
- .nway_reset = e1000_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = e1000_get_eeprom_len,
- .get_eeprom = e1000_get_eeprom,
- .set_eeprom = e1000_set_eeprom,
- .get_ringparam = e1000_get_ringparam,
- .set_ringparam = e1000_set_ringparam,
- .get_pauseparam = e1000_get_pauseparam,
- .set_pauseparam = e1000_set_pauseparam,
- .get_rx_csum = e1000_get_rx_csum,
- .set_rx_csum = e1000_set_rx_csum,
- .get_tx_csum = e1000_get_tx_csum,
- .set_tx_csum = e1000_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = e1000_set_tso,
- .self_test = e1000_diag_test,
- .get_strings = e1000_get_strings,
- .set_phys_id = e1000_set_phys_id,
- .get_ethtool_stats = e1000_get_ethtool_stats,
- .get_sset_count = e1000e_get_sset_count,
- .get_coalesce = e1000_get_coalesce,
- .set_coalesce = e1000_set_coalesce,
- .get_flags = ethtool_op_get_flags,
- .set_flags = e1000e_set_flags,
-};
-
-void e1000e_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_HW_H_
-#define _E1000_HW_H_
-
-#include <linux/types.h>
-
-struct e1000_hw;
-struct e1000_adapter;
-
-#include "defines.h"
-
-#define er32(reg) __er32(hw, E1000_##reg)
-#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
-#define e1e_flush() er32(STATUS)
-
-#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
- (writel((value), ((a)->hw_addr + reg + ((offset) << 2))))
-
-#define E1000_READ_REG_ARRAY(a, reg, offset) \
- (readl((a)->hw_addr + reg + ((offset) << 2)))
-
-enum e1e_registers {
- E1000_CTRL = 0x00000, /* Device Control - RW */
- E1000_STATUS = 0x00008, /* Device Status - RO */
- E1000_EECD = 0x00010, /* EEPROM/Flash Control - RW */
- E1000_EERD = 0x00014, /* EEPROM Read - RW */
- E1000_CTRL_EXT = 0x00018, /* Extended Device Control - RW */
- E1000_FLA = 0x0001C, /* Flash Access - RW */
- E1000_MDIC = 0x00020, /* MDI Control - RW */
- E1000_SCTL = 0x00024, /* SerDes Control - RW */
- E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */
- E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */
- E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */
- E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */
- E1000_FCT = 0x00030, /* Flow Control Type - RW */
- E1000_VET = 0x00038, /* VLAN Ether Type - RW */
- E1000_ICR = 0x000C0, /* Interrupt Cause Read - R/clr */
- E1000_ITR = 0x000C4, /* Interrupt Throttling Rate - RW */
- E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */
- E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */
- E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */
- E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
- E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
- E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
- E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
-#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
- E1000_RCTL = 0x00100, /* Rx Control - RW */
- E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
- E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
- E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */
- E1000_TCTL = 0x00400, /* Tx Control - RW */
- E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */
- E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */
- E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */
- E1000_LEDCTL = 0x00E00, /* LED Control - RW */
- E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */
- E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */
- E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */
-#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
- E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */
- E1000_PBS = 0x01008, /* Packet Buffer Size */
- E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
- E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */
- E1000_FLOP = 0x0103C, /* FLASH Opcode Register */
- E1000_PBA_ECC = 0x01100, /* PBA ECC Register */
- E1000_ERT = 0x02008, /* Early Rx Threshold - RW */
- E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */
- E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */
- E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */
- E1000_RDBAL = 0x02800, /* Rx Descriptor Base Address Low - RW */
- E1000_RDBAH = 0x02804, /* Rx Descriptor Base Address High - RW */
- E1000_RDLEN = 0x02808, /* Rx Descriptor Length - RW */
- E1000_RDH = 0x02810, /* Rx Descriptor Head - RW */
- E1000_RDT = 0x02818, /* Rx Descriptor Tail - RW */
- E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
- E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
-#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
- E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */
-
-/* Convenience macros
- *
- * Note: "_n" is the queue number of the register to be written to.
- *
- * Example usage:
- * E1000_RDBAL_REG(current_rx_queue)
- *
- */
-#define E1000_RDBAL_REG(_n) (E1000_RDBAL + (_n << 8))
- E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */
- E1000_TDBAL = 0x03800, /* Tx Descriptor Base Address Low - RW */
- E1000_TDBAH = 0x03804, /* Tx Descriptor Base Address High - RW */
- E1000_TDLEN = 0x03808, /* Tx Descriptor Length - RW */
- E1000_TDH = 0x03810, /* Tx Descriptor Head - RW */
- E1000_TDT = 0x03818, /* Tx Descriptor Tail - RW */
- E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */
- E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */
-#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8))
- E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */
- E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */
-#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8))
- E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */
- E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */
- E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */
- E1000_RXERRC = 0x0400C, /* Receive Error Count - R/clr */
- E1000_MPC = 0x04010, /* Missed Packet Count - R/clr */
- E1000_SCC = 0x04014, /* Single Collision Count - R/clr */
- E1000_ECOL = 0x04018, /* Excessive Collision Count - R/clr */
- E1000_MCC = 0x0401C, /* Multiple Collision Count - R/clr */
- E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */
- E1000_COLC = 0x04028, /* Collision Count - R/clr */
- E1000_DC = 0x04030, /* Defer Count - R/clr */
- E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */
- E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */
- E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */
- E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */
- E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */
- E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */
- E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */
- E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */
- E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */
- E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */
- E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */
- E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */
- E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */
- E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */
- E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */
- E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */
- E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */
- E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */
- E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */
- E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */
- E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */
- E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */
- E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */
- E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */
- E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */
- E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */
- E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */
- E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */
- E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */
- E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */
- E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */
- E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */
- E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */
- E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */
- E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */
- E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */
- E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */
- E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */
- E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */
- E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */
- E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */
- E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */
- E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */
- E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */
- E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */
- E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */
- E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */
- E1000_IAC = 0x04100, /* Interrupt Assertion Count */
- E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */
- E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */
- E1000_ICTXPTC = 0x0410C, /* Irq Cause Tx Packet Timer Expire Count */
- E1000_ICTXATC = 0x04110, /* Irq Cause Tx Abs Timer Expire Count */
- E1000_ICTXQEC = 0x04118, /* Irq Cause Tx Queue Empty Count */
- E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */
- E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
- E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */
- E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */
- E1000_RFCTL = 0x05008, /* Receive Filter Control */
- E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */
- E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */
-#define E1000_RAL(_n) (E1000_RAL_BASE + ((_n) * 8))
-#define E1000_RA (E1000_RAL(0))
- E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
-#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8))
- E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */
- E1000_WUC = 0x05800, /* Wakeup Control - RW */
- E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */
- E1000_WUS = 0x05810, /* Wakeup Status - RO */
- E1000_MANC = 0x05820, /* Management Control - RW */
- E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */
- E1000_HOST_IF = 0x08800, /* Host Interface */
-
- E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */
- E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
- E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */
-#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4))
- E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
- E1000_GCR = 0x05B00, /* PCI-Ex Control */
- E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */
- E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
- E1000_SWSM = 0x05B50, /* SW Semaphore */
- E1000_FWSM = 0x05B54, /* FW Semaphore */
- E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
- E1000_FFLT_DBG = 0x05F04, /* Debug Register */
- E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
-#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
-#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
- E1000_HICR = 0x08F00, /* Host Interface Control */
-};
-
-#define E1000_MAX_PHY_ADDR 4
-
-/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
-#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
-#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
-#define IGP_PAGE_SHIFT 5
-#define PHY_REG_MASK 0x1F
-
-#define BM_WUC_PAGE 800
-#define BM_WUC_ADDRESS_OPCODE 0x11
-#define BM_WUC_DATA_OPCODE 0x12
-#define BM_WUC_ENABLE_PAGE 769
-#define BM_WUC_ENABLE_REG 17
-#define BM_WUC_ENABLE_BIT (1 << 2)
-#define BM_WUC_HOST_WU_BIT (1 << 4)
-#define BM_WUC_ME_WU_BIT (1 << 5)
-
-#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
-#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
-#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
-
-#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
-#define IGP01E1000_PHY_POLARITY_MASK 0x0078
-
-#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
-
-#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
-
-#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
-#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
-#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
-
-#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
-
-#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_MDIX 0x0800
-#define IGP01E1000_PSSR_SPEED_MASK 0xC000
-#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
-
-#define IGP02E1000_PHY_CHANNEL_NUM 4
-#define IGP02E1000_PHY_AGC_A 0x11B1
-#define IGP02E1000_PHY_AGC_B 0x12B1
-#define IGP02E1000_PHY_AGC_C 0x14B1
-#define IGP02E1000_PHY_AGC_D 0x18B1
-
-#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
-#define IGP02E1000_AGC_LENGTH_MASK 0x7F
-#define IGP02E1000_AGC_RANGE 15
-
-/* manage.c */
-#define E1000_VFTA_ENTRY_SHIFT 5
-#define E1000_VFTA_ENTRY_MASK 0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
-
-#define E1000_HICR_EN 0x01 /* Enable bit - RO */
-/* Driver sets this bit when done to put command in RAM */
-#define E1000_HICR_C 0x02
-#define E1000_HICR_FW_RESET_ENABLE 0x40
-#define E1000_HICR_FW_RESET 0x80
-
-#define E1000_FWSM_MODE_MASK 0xE
-#define E1000_FWSM_MODE_SHIFT 1
-
-#define E1000_MNG_IAMT_MODE 0x3
-#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10
-#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0
-#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10
-#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
-#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
-
-/* nvm.c */
-#define E1000_STM_OPCODE 0xDB00
-
-#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
-#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
-#define E1000_KMRNCTRLSTA_REN 0x00200000
-#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */
-#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
-#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
-#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
-#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */
-#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
-#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
-#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002
-#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */
-
-#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
-#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
-#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
-#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
-
-/* IFE PHY Extended Status Control */
-#define IFE_PESC_POLARITY_REVERSED 0x0100
-
-/* IFE PHY Special Control */
-#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
-#define IFE_PSC_FORCE_POLARITY 0x0020
-
-/* IFE PHY Special Control and LED Control */
-#define IFE_PSCL_PROBE_MODE 0x0020
-#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
-#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
-
-/* IFE PHY MDIX Control */
-#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
-#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
-#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
-
-#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
-
-#define E1000_DEV_ID_82571EB_COPPER 0x105E
-#define E1000_DEV_ID_82571EB_FIBER 0x105F
-#define E1000_DEV_ID_82571EB_SERDES 0x1060
-#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
-#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
-#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
-#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
-#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
-#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
-#define E1000_DEV_ID_82572EI_COPPER 0x107D
-#define E1000_DEV_ID_82572EI_FIBER 0x107E
-#define E1000_DEV_ID_82572EI_SERDES 0x107F
-#define E1000_DEV_ID_82572EI 0x10B9
-#define E1000_DEV_ID_82573E 0x108B
-#define E1000_DEV_ID_82573E_IAMT 0x108C
-#define E1000_DEV_ID_82573L 0x109A
-#define E1000_DEV_ID_82574L 0x10D3
-#define E1000_DEV_ID_82574LA 0x10F6
-#define E1000_DEV_ID_82583V 0x150C
-
-#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
-#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
-#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
-#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
-
-#define E1000_DEV_ID_ICH8_82567V_3 0x1501
-#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
-#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
-#define E1000_DEV_ID_ICH8_IGP_C 0x104B
-#define E1000_DEV_ID_ICH8_IFE 0x104C
-#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
-#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
-#define E1000_DEV_ID_ICH8_IGP_M 0x104D
-#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
-#define E1000_DEV_ID_ICH9_BM 0x10E5
-#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
-#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
-#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
-#define E1000_DEV_ID_ICH9_IGP_C 0x294C
-#define E1000_DEV_ID_ICH9_IFE 0x10C0
-#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
-#define E1000_DEV_ID_ICH9_IFE_G 0x10C2
-#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
-#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
-#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
-#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
-#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
-#define E1000_DEV_ID_ICH10_D_BM_V 0x1525
-#define E1000_DEV_ID_PCH_M_HV_LM 0x10EA
-#define E1000_DEV_ID_PCH_M_HV_LC 0x10EB
-#define E1000_DEV_ID_PCH_D_HV_DM 0x10EF
-#define E1000_DEV_ID_PCH_D_HV_DC 0x10F0
-#define E1000_DEV_ID_PCH2_LV_LM 0x1502
-#define E1000_DEV_ID_PCH2_LV_V 0x1503
-
-#define E1000_REVISION_4 4
-
-#define E1000_FUNC_1 1
-
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
-
-enum e1000_mac_type {
- e1000_82571,
- e1000_82572,
- e1000_82573,
- e1000_82574,
- e1000_82583,
- e1000_80003es2lan,
- e1000_ich8lan,
- e1000_ich9lan,
- e1000_ich10lan,
- e1000_pchlan,
- e1000_pch2lan,
-};
-
-enum e1000_media_type {
- e1000_media_type_unknown = 0,
- e1000_media_type_copper = 1,
- e1000_media_type_fiber = 2,
- e1000_media_type_internal_serdes = 3,
- e1000_num_media_types
-};
-
-enum e1000_nvm_type {
- e1000_nvm_unknown = 0,
- e1000_nvm_none,
- e1000_nvm_eeprom_spi,
- e1000_nvm_flash_hw,
- e1000_nvm_flash_sw
-};
-
-enum e1000_nvm_override {
- e1000_nvm_override_none = 0,
- e1000_nvm_override_spi_small,
- e1000_nvm_override_spi_large
-};
-
-enum e1000_phy_type {
- e1000_phy_unknown = 0,
- e1000_phy_none,
- e1000_phy_m88,
- e1000_phy_igp,
- e1000_phy_igp_2,
- e1000_phy_gg82563,
- e1000_phy_igp_3,
- e1000_phy_ife,
- e1000_phy_bm,
- e1000_phy_82578,
- e1000_phy_82577,
- e1000_phy_82579,
-};
-
-enum e1000_bus_width {
- e1000_bus_width_unknown = 0,
- e1000_bus_width_pcie_x1,
- e1000_bus_width_pcie_x2,
- e1000_bus_width_pcie_x4 = 4,
- e1000_bus_width_32,
- e1000_bus_width_64,
- e1000_bus_width_reserved
-};
-
-enum e1000_1000t_rx_status {
- e1000_1000t_rx_status_not_ok = 0,
- e1000_1000t_rx_status_ok,
- e1000_1000t_rx_status_undefined = 0xFF
-};
-
-enum e1000_rev_polarity{
- e1000_rev_polarity_normal = 0,
- e1000_rev_polarity_reversed,
- e1000_rev_polarity_undefined = 0xFF
-};
-
-enum e1000_fc_mode {
- e1000_fc_none = 0,
- e1000_fc_rx_pause,
- e1000_fc_tx_pause,
- e1000_fc_full,
- e1000_fc_default = 0xFF
-};
-
-enum e1000_ms_type {
- e1000_ms_hw_default = 0,
- e1000_ms_force_master,
- e1000_ms_force_slave,
- e1000_ms_auto
-};
-
-enum e1000_smart_speed {
- e1000_smart_speed_default = 0,
- e1000_smart_speed_on,
- e1000_smart_speed_off
-};
-
-enum e1000_serdes_link_state {
- e1000_serdes_link_down = 0,
- e1000_serdes_link_autoneg_progress,
- e1000_serdes_link_autoneg_complete,
- e1000_serdes_link_forced_up
-};
-
-/* Receive Descriptor */
-struct e1000_rx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- __le16 length; /* Length of data DMAed into data buffer */
- __le16 csum; /* Packet checksum */
- u8 status; /* Descriptor status */
- u8 errors; /* Descriptor Errors */
- __le16 special;
-};
-
-/* Receive Descriptor - Extended */
-union e1000_rx_desc_extended {
- struct {
- __le64 buffer_addr;
- __le64 reserved;
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length;
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-#define MAX_PS_BUFFERS 4
-/* Receive Descriptor - Packet Split */
-union e1000_rx_desc_packet_split {
- struct {
- /* one buffer for protocol header(s), three data buffers */
- __le64 buffer_addr[MAX_PS_BUFFERS];
- } read;
- struct {
- struct {
- __le32 mrq; /* Multiple Rx Queues */
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length0; /* length of buffer 0 */
- __le16 vlan; /* VLAN tag */
- } middle;
- struct {
- __le16 header_status;
- __le16 length[3]; /* length of buffers 1-3 */
- } upper;
- __le64 reserved;
- } wb; /* writeback */
-};
-
-/* Transmit Descriptor */
-struct e1000_tx_desc {
- __le64 buffer_addr; /* Address of the descriptor's data buffer */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 cso; /* Checksum offset */
- u8 cmd; /* Descriptor control */
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 css; /* Checksum start */
- __le16 special;
- } fields;
- } upper;
-};
-
-/* Offload Context Descriptor */
-struct e1000_context_desc {
- union {
- __le32 ip_config;
- struct {
- u8 ipcss; /* IP checksum start */
- u8 ipcso; /* IP checksum offset */
- __le16 ipcse; /* IP checksum end */
- } ip_fields;
- } lower_setup;
- union {
- __le32 tcp_config;
- struct {
- u8 tucss; /* TCP checksum start */
- u8 tucso; /* TCP checksum offset */
- __le16 tucse; /* TCP checksum end */
- } tcp_fields;
- } upper_setup;
- __le32 cmd_and_length;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 hdr_len; /* Header length */
- __le16 mss; /* Maximum segment size */
- } fields;
- } tcp_seg_setup;
-};
-
-/* Offload data descriptor */
-struct e1000_data_desc {
- __le64 buffer_addr; /* Address of the descriptor's buffer address */
- union {
- __le32 data;
- struct {
- __le16 length; /* Data buffer length */
- u8 typ_len_ext;
- u8 cmd;
- } flags;
- } lower;
- union {
- __le32 data;
- struct {
- u8 status; /* Descriptor status */
- u8 popts; /* Packet Options */
- __le16 special; /* */
- } fields;
- } upper;
-};
-
-/* Statistics counters collected by the MAC */
-struct e1000_hw_stats {
- u64 crcerrs;
- u64 algnerrc;
- u64 symerrs;
- u64 rxerrc;
- u64 mpc;
- u64 scc;
- u64 ecol;
- u64 mcc;
- u64 latecol;
- u64 colc;
- u64 dc;
- u64 tncrs;
- u64 sec;
- u64 cexterr;
- u64 rlec;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 fcruc;
- u64 prc64;
- u64 prc127;
- u64 prc255;
- u64 prc511;
- u64 prc1023;
- u64 prc1522;
- u64 gprc;
- u64 bprc;
- u64 mprc;
- u64 gptc;
- u64 gorc;
- u64 gotc;
- u64 rnbc;
- u64 ruc;
- u64 rfc;
- u64 roc;
- u64 rjc;
- u64 mgprc;
- u64 mgpdc;
- u64 mgptc;
- u64 tor;
- u64 tot;
- u64 tpr;
- u64 tpt;
- u64 ptc64;
- u64 ptc127;
- u64 ptc255;
- u64 ptc511;
- u64 ptc1023;
- u64 ptc1522;
- u64 mptc;
- u64 bptc;
- u64 tsctc;
- u64 tsctfc;
- u64 iac;
- u64 icrxptc;
- u64 icrxatc;
- u64 ictxptc;
- u64 ictxatc;
- u64 ictxqec;
- u64 ictxqmtc;
- u64 icrxdmtc;
- u64 icrxoc;
-};
-
-struct e1000_phy_stats {
- u32 idle_errors;
- u32 receive_errors;
-};
-
-struct e1000_host_mng_dhcp_cookie {
- u32 signature;
- u8 status;
- u8 reserved0;
- u16 vlan_id;
- u32 reserved1;
- u16 reserved2;
- u8 reserved3;
- u8 checksum;
-};
-
-/* Host Interface "Rev 1" */
-struct e1000_host_command_header {
- u8 command_id;
- u8 command_length;
- u8 command_options;
- u8 checksum;
-};
-
-#define E1000_HI_MAX_DATA_LENGTH 252
-struct e1000_host_command_info {
- struct e1000_host_command_header command_header;
- u8 command_data[E1000_HI_MAX_DATA_LENGTH];
-};
-
-/* Host Interface "Rev 2" */
-struct e1000_host_mng_command_header {
- u8 command_id;
- u8 checksum;
- u16 reserved1;
- u16 reserved2;
- u16 command_length;
-};
-
-#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
-struct e1000_host_mng_command_info {
- struct e1000_host_mng_command_header command_header;
- u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
-};
-
-/* Function pointers and static data for the MAC. */
-struct e1000_mac_operations {
- s32 (*id_led_init)(struct e1000_hw *);
- s32 (*blink_led)(struct e1000_hw *);
- bool (*check_mng_mode)(struct e1000_hw *);
- s32 (*check_for_link)(struct e1000_hw *);
- s32 (*cleanup_led)(struct e1000_hw *);
- void (*clear_hw_cntrs)(struct e1000_hw *);
- void (*clear_vfta)(struct e1000_hw *);
- s32 (*get_bus_info)(struct e1000_hw *);
- void (*set_lan_id)(struct e1000_hw *);
- s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
- s32 (*led_on)(struct e1000_hw *);
- s32 (*led_off)(struct e1000_hw *);
- void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
- s32 (*reset_hw)(struct e1000_hw *);
- s32 (*init_hw)(struct e1000_hw *);
- s32 (*setup_link)(struct e1000_hw *);
- s32 (*setup_physical_interface)(struct e1000_hw *);
- s32 (*setup_led)(struct e1000_hw *);
- void (*write_vfta)(struct e1000_hw *, u32, u32);
- s32 (*read_mac_addr)(struct e1000_hw *);
-};
-
-/*
- * When to use various PHY register access functions:
- *
- * Func Caller
- * Function Does Does When to use
- * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * X_reg L,P,A n/a for simple PHY reg accesses
- * X_reg_locked P,A L for multiple accesses of different regs
- * on different pages
- * X_reg_page A L,P for multiple accesses of different regs
- * on the same page
- *
- * Where X=[read|write], L=locking, P=sets page, A=register access
- *
- */
-struct e1000_phy_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*cfg_on_link_up)(struct e1000_hw *);
- s32 (*check_polarity)(struct e1000_hw *);
- s32 (*check_reset_block)(struct e1000_hw *);
- s32 (*commit)(struct e1000_hw *);
- s32 (*force_speed_duplex)(struct e1000_hw *);
- s32 (*get_cfg_done)(struct e1000_hw *hw);
- s32 (*get_cable_length)(struct e1000_hw *);
- s32 (*get_info)(struct e1000_hw *);
- s32 (*set_page)(struct e1000_hw *, u16);
- s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
- s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
- s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*reset)(struct e1000_hw *);
- s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
- s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
- s32 (*write_reg)(struct e1000_hw *, u32, u16);
- s32 (*write_reg_locked)(struct e1000_hw *, u32, u16);
- s32 (*write_reg_page)(struct e1000_hw *, u32, u16);
- void (*power_up)(struct e1000_hw *);
- void (*power_down)(struct e1000_hw *);
-};
-
-/* Function pointers for the NVM. */
-struct e1000_nvm_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*update)(struct e1000_hw *);
- s32 (*valid_led_default)(struct e1000_hw *, u16 *);
- s32 (*validate)(struct e1000_hw *);
- s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
-};
-
-struct e1000_mac_info {
- struct e1000_mac_operations ops;
- u8 addr[ETH_ALEN];
- u8 perm_addr[ETH_ALEN];
-
- enum e1000_mac_type type;
-
- u32 collision_delta;
- u32 ledctl_default;
- u32 ledctl_mode1;
- u32 ledctl_mode2;
- u32 mc_filter_type;
- u32 tx_packet_delta;
- u32 txcw;
-
- u16 current_ifs_val;
- u16 ifs_max_val;
- u16 ifs_min_val;
- u16 ifs_ratio;
- u16 ifs_step_size;
- u16 mta_reg_count;
-
- /* Maximum size of the MTA register table in all supported adapters */
- #define MAX_MTA_REG 128
- u32 mta_shadow[MAX_MTA_REG];
- u16 rar_entry_count;
-
- u8 forced_speed_duplex;
-
- bool adaptive_ifs;
- bool has_fwsm;
- bool arc_subsystem_valid;
- bool autoneg;
- bool autoneg_failed;
- bool get_link_status;
- bool in_ifs_mode;
- bool serdes_has_link;
- bool tx_pkt_filtering;
- enum e1000_serdes_link_state serdes_link_state;
-};
-
-struct e1000_phy_info {
- struct e1000_phy_operations ops;
-
- enum e1000_phy_type type;
-
- enum e1000_1000t_rx_status local_rx;
- enum e1000_1000t_rx_status remote_rx;
- enum e1000_ms_type ms_type;
- enum e1000_ms_type original_ms_type;
- enum e1000_rev_polarity cable_polarity;
- enum e1000_smart_speed smart_speed;
-
- u32 addr;
- u32 id;
- u32 reset_delay_us; /* in usec */
- u32 revision;
-
- enum e1000_media_type media_type;
-
- u16 autoneg_advertised;
- u16 autoneg_mask;
- u16 cable_length;
- u16 max_cable_length;
- u16 min_cable_length;
-
- u8 mdix;
-
- bool disable_polarity_correction;
- bool is_mdix;
- bool polarity_correction;
- bool speed_downgraded;
- bool autoneg_wait_to_complete;
-};
-
-struct e1000_nvm_info {
- struct e1000_nvm_operations ops;
-
- enum e1000_nvm_type type;
- enum e1000_nvm_override override;
-
- u32 flash_bank_size;
- u32 flash_base_addr;
-
- u16 word_size;
- u16 delay_usec;
- u16 address_bits;
- u16 opcode_bits;
- u16 page_size;
-};
-
-struct e1000_bus_info {
- enum e1000_bus_width width;
-
- u16 func;
-};
-
-struct e1000_fc_info {
- u32 high_water; /* Flow control high-water mark */
- u32 low_water; /* Flow control low-water mark */
- u16 pause_time; /* Flow control pause timer */
- u16 refresh_time; /* Flow control refresh timer */
- bool send_xon; /* Flow control send XON */
- bool strict_ieee; /* Strict IEEE mode */
- enum e1000_fc_mode current_mode; /* FC mode in effect */
- enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
-};
-
-struct e1000_dev_spec_82571 {
- bool laa_is_present;
- u32 smb_counter;
-};
-
-struct e1000_dev_spec_80003es2lan {
- bool mdic_wa_enable;
-};
-
-struct e1000_shadow_ram {
- u16 value;
- bool modified;
-};
-
-#define E1000_ICH8_SHADOW_RAM_WORDS 2048
-
-struct e1000_dev_spec_ich8lan {
- bool kmrn_lock_loss_workaround_enabled;
- struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
- bool nvm_k1_enabled;
- bool eee_disable;
-};
-
-struct e1000_hw {
- struct e1000_adapter *adapter;
-
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
-
- struct e1000_mac_info mac;
- struct e1000_fc_info fc;
- struct e1000_phy_info phy;
- struct e1000_nvm_info nvm;
- struct e1000_bus_info bus;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
-
- union {
- struct e1000_dev_spec_82571 e82571;
- struct e1000_dev_spec_80003es2lan e80003es2lan;
- struct e1000_dev_spec_ich8lan ich8lan;
- } dev_spec;
-};
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/*
- * 82562G 10/100 Network Connection
- * 82562G-2 10/100 Network Connection
- * 82562GT 10/100 Network Connection
- * 82562GT-2 10/100 Network Connection
- * 82562V 10/100 Network Connection
- * 82562V-2 10/100 Network Connection
- * 82566DC-2 Gigabit Network Connection
- * 82566DC Gigabit Network Connection
- * 82566DM-2 Gigabit Network Connection
- * 82566DM Gigabit Network Connection
- * 82566MC Gigabit Network Connection
- * 82566MM Gigabit Network Connection
- * 82567LM Gigabit Network Connection
- * 82567LF Gigabit Network Connection
- * 82567V Gigabit Network Connection
- * 82567LM-2 Gigabit Network Connection
- * 82567LF-2 Gigabit Network Connection
- * 82567V-2 Gigabit Network Connection
- * 82567LF-3 Gigabit Network Connection
- * 82567LM-3 Gigabit Network Connection
- * 82567LM-4 Gigabit Network Connection
- * 82577LM Gigabit Network Connection
- * 82577LC Gigabit Network Connection
- * 82578DM Gigabit Network Connection
- * 82578DC Gigabit Network Connection
- * 82579LM Gigabit Network Connection
- * 82579V Gigabit Network Connection
- */
-
-#include "e1000.h"
-
-#define ICH_FLASH_GFPREG 0x0000
-#define ICH_FLASH_HSFSTS 0x0004
-#define ICH_FLASH_HSFCTL 0x0006
-#define ICH_FLASH_FADDR 0x0008
-#define ICH_FLASH_FDATA0 0x0010
-#define ICH_FLASH_PR0 0x0074
-
-#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
-#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
-#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000
-#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
-#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
-
-#define ICH_CYCLE_READ 0
-#define ICH_CYCLE_WRITE 2
-#define ICH_CYCLE_ERASE 3
-
-#define FLASH_GFPREG_BASE_MASK 0x1FFF
-#define FLASH_SECTOR_ADDR_SHIFT 12
-
-#define ICH_FLASH_SEG_SIZE_256 256
-#define ICH_FLASH_SEG_SIZE_4K 4096
-#define ICH_FLASH_SEG_SIZE_8K 8192
-#define ICH_FLASH_SEG_SIZE_64K 65536
-
-
-#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
-/* FW established a valid mode */
-#define E1000_ICH_FWSM_FW_VALID 0x00008000
-
-#define E1000_ICH_MNG_IAMT_MODE 0x2
-
-#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_DEF1_OFF2 << 8) | \
- (ID_LED_DEF1_ON2 << 4) | \
- (ID_LED_DEF1_DEF2))
-
-#define E1000_ICH_NVM_SIG_WORD 0x13
-#define E1000_ICH_NVM_SIG_MASK 0xC000
-#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
-#define E1000_ICH_NVM_SIG_VALUE 0x80
-
-#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
-
-#define E1000_FEXTNVM_SW_CONFIG 1
-#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
-
-#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
-#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
-
-#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
-
-#define E1000_ICH_RAR_ENTRIES 7
-
-#define PHY_PAGE_SHIFT 5
-#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
- ((reg) & MAX_PHY_REG_ADDRESS))
-#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
-#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
-
-#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
-#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
-#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
-
-#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
-
-#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
-
-/* SMBus Address Phy Register */
-#define HV_SMB_ADDR PHY_REG(768, 26)
-#define HV_SMB_ADDR_MASK 0x007F
-#define HV_SMB_ADDR_PEC_EN 0x0200
-#define HV_SMB_ADDR_VALID 0x0080
-
-/* PHY Power Management Control */
-#define HV_PM_CTRL PHY_REG(770, 17)
-
-/* PHY Low Power Idle Control */
-#define I82579_LPI_CTRL PHY_REG(772, 20)
-#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
-
-/* EMI Registers */
-#define I82579_EMI_ADDR 0x10
-#define I82579_EMI_DATA 0x11
-#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
-
-/* Strapping Option Register - RO */
-#define E1000_STRAP 0x0000C
-#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
-#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
-
-/* OEM Bits Phy Register */
-#define HV_OEM_BITS PHY_REG(768, 25)
-#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
-#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
-#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
-
-#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
-#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
-
-/* KMRN Mode Control */
-#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
-#define HV_KMRN_MDIO_SLOW 0x0400
-
-/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
-/* Offset 04h HSFSTS */
-union ich8_hws_flash_status {
- struct ich8_hsfsts {
- u16 flcdone :1; /* bit 0 Flash Cycle Done */
- u16 flcerr :1; /* bit 1 Flash Cycle Error */
- u16 dael :1; /* bit 2 Direct Access error Log */
- u16 berasesz :2; /* bit 4:3 Sector Erase Size */
- u16 flcinprog :1; /* bit 5 flash cycle in Progress */
- u16 reserved1 :2; /* bit 13:6 Reserved */
- u16 reserved2 :6; /* bit 13:6 Reserved */
- u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
- u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
- } hsf_status;
- u16 regval;
-};
-
-/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
-/* Offset 06h FLCTL */
-union ich8_hws_flash_ctrl {
- struct ich8_hsflctl {
- u16 flcgo :1; /* 0 Flash Cycle Go */
- u16 flcycle :2; /* 2:1 Flash Cycle */
- u16 reserved :5; /* 7:3 Reserved */
- u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
- u16 flockdn :6; /* 15:10 Reserved */
- } hsf_ctrl;
- u16 regval;
-};
-
-/* ICH Flash Region Access Permissions */
-union ich8_hws_flash_regacc {
- struct ich8_flracc {
- u32 grra :8; /* 0:7 GbE region Read Access */
- u32 grwa :8; /* 8:15 GbE region Write Access */
- u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
- u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
- } hsf_flregacc;
- u16 regval;
-};
-
-/* ICH Flash Protected Region */
-union ich8_flash_protected_range {
- struct ich8_pr {
- u32 base:13; /* 0:12 Protected Range Base */
- u32 reserved1:2; /* 13:14 Reserved */
- u32 rpe:1; /* 15 Read Protection Enable */
- u32 limit:13; /* 16:28 Protected Range Limit */
- u32 reserved2:2; /* 29:30 Reserved */
- u32 wpe:1; /* 31 Write Protection Enable */
- } range;
- u32 regval;
-};
-
-static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
-static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
-static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
-static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
-static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
- u32 offset, u8 byte);
-static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 *data);
-static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
- u16 *data);
-static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 size, u16 *data);
-static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
-static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
-static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
-static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
-static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
-static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
-static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
-static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
-static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
-static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
-static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
-static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
-static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
-static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
-static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
-static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
-static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
-static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
-static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
-static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
-
-static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
-{
- return readw(hw->flash_address + reg);
-}
-
-static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
-{
- return readl(hw->flash_address + reg);
-}
-
-static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
-{
- writew(val, hw->flash_address + reg);
-}
-
-static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
-{
- writel(val, hw->flash_address + reg);
-}
-
-#define er16flash(reg) __er16flash(hw, (reg))
-#define er32flash(reg) __er32flash(hw, (reg))
-#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
-#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
-
-static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
- ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, ctrl);
- e1e_flush();
- udelay(10);
- ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, ctrl);
-}
-
-/**
- * e1000_init_phy_params_pchlan - Initialize PHY function pointers
- * @hw: pointer to the HW structure
- *
- * Initialize family-specific PHY parameters and function pointers.
- **/
-static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 fwsm;
- s32 ret_val = 0;
-
- phy->addr = 1;
- phy->reset_delay_us = 100;
-
- phy->ops.set_page = e1000_set_page_igp;
- phy->ops.read_reg = e1000_read_phy_reg_hv;
- phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
- phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
- phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
- phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
- phy->ops.write_reg = e1000_write_phy_reg_hv;
- phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
- phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
-
- /*
- * The MAC-PHY interconnect may still be in SMBus mode
- * after Sx->S0. If the manageability engine (ME) is
- * disabled, then toggle the LANPHYPC Value bit to force
- * the interconnect to PCIe mode.
- */
- fwsm = er32(FWSM);
- if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
- e1000_toggle_lanphypc_value_ich8lan(hw);
- msleep(50);
-
- /*
- * Gate automatic PHY configuration by hardware on
- * non-managed 82579
- */
- if (hw->mac.type == e1000_pch2lan)
- e1000_gate_hw_phy_config_ich8lan(hw, true);
- }
-
- /*
- * Reset the PHY before any access to it. Doing so, ensures that
- * the PHY is in a known good state before we read/write PHY registers.
- * The generic reset is sufficient here, because we haven't determined
- * the PHY type yet.
- */
- ret_val = e1000e_phy_hw_reset_generic(hw);
- if (ret_val)
- goto out;
-
- /* Ungate automatic PHY configuration on non-managed 82579 */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
- usleep_range(10000, 20000);
- e1000_gate_hw_phy_config_ich8lan(hw, false);
- }
-
- phy->id = e1000_phy_unknown;
- switch (hw->mac.type) {
- default:
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- goto out;
- if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
- break;
- /* fall-through */
- case e1000_pch2lan:
- /*
- * In case the PHY needs to be in mdio slow mode,
- * set slow mode and try to get the PHY id again.
- */
- ret_val = e1000_set_mdio_slow_mode_hv(hw);
- if (ret_val)
- goto out;
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- goto out;
- break;
- }
- phy->type = e1000e_get_phy_type_from_id(phy->id);
-
- switch (phy->type) {
- case e1000_phy_82577:
- case e1000_phy_82579:
- phy->ops.check_polarity = e1000_check_polarity_82577;
- phy->ops.force_speed_duplex =
- e1000_phy_force_speed_duplex_82577;
- phy->ops.get_cable_length = e1000_get_cable_length_82577;
- phy->ops.get_info = e1000_get_phy_info_82577;
- phy->ops.commit = e1000e_phy_sw_reset;
- break;
- case e1000_phy_82578:
- phy->ops.check_polarity = e1000_check_polarity_m88;
- phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
- phy->ops.get_cable_length = e1000e_get_cable_length_m88;
- phy->ops.get_info = e1000e_get_phy_info_m88;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- break;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_init_phy_params_ich8lan - Initialize PHY function pointers
- * @hw: pointer to the HW structure
- *
- * Initialize family-specific PHY parameters and function pointers.
- **/
-static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 i = 0;
-
- phy->addr = 1;
- phy->reset_delay_us = 100;
-
- phy->ops.power_up = e1000_power_up_phy_copper;
- phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
-
- /*
- * We may need to do this twice - once for IGP and if that fails,
- * we'll set BM func pointers and try again
- */
- ret_val = e1000e_determine_phy_address(hw);
- if (ret_val) {
- phy->ops.write_reg = e1000e_write_phy_reg_bm;
- phy->ops.read_reg = e1000e_read_phy_reg_bm;
- ret_val = e1000e_determine_phy_address(hw);
- if (ret_val) {
- e_dbg("Cannot determine PHY addr. Erroring out\n");
- return ret_val;
- }
- }
-
- phy->id = 0;
- while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
- (i++ < 100)) {
- usleep_range(1000, 2000);
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Verify phy id */
- switch (phy->id) {
- case IGP03E1000_E_PHY_ID:
- phy->type = e1000_phy_igp_3;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
- phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
- phy->ops.get_info = e1000e_get_phy_info_igp;
- phy->ops.check_polarity = e1000_check_polarity_igp;
- phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
- break;
- case IFE_E_PHY_ID:
- case IFE_PLUS_E_PHY_ID:
- case IFE_C_E_PHY_ID:
- phy->type = e1000_phy_ife;
- phy->autoneg_mask = E1000_ALL_NOT_GIG;
- phy->ops.get_info = e1000_get_phy_info_ife;
- phy->ops.check_polarity = e1000_check_polarity_ife;
- phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
- break;
- case BME1000_E_PHY_ID:
- phy->type = e1000_phy_bm;
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->ops.read_reg = e1000e_read_phy_reg_bm;
- phy->ops.write_reg = e1000e_write_phy_reg_bm;
- phy->ops.commit = e1000e_phy_sw_reset;
- phy->ops.get_info = e1000e_get_phy_info_m88;
- phy->ops.check_polarity = e1000_check_polarity_m88;
- phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
- break;
- default:
- return -E1000_ERR_PHY;
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
- * @hw: pointer to the HW structure
- *
- * Initialize family-specific NVM parameters and function
- * pointers.
- **/
-static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u32 gfpreg, sector_base_addr, sector_end_addr;
- u16 i;
-
- /* Can't read flash registers if the register set isn't mapped. */
- if (!hw->flash_address) {
- e_dbg("ERROR: Flash registers not mapped\n");
- return -E1000_ERR_CONFIG;
- }
-
- nvm->type = e1000_nvm_flash_sw;
-
- gfpreg = er32flash(ICH_FLASH_GFPREG);
-
- /*
- * sector_X_addr is a "sector"-aligned address (4096 bytes)
- * Add 1 to sector_end_addr since this sector is included in
- * the overall size.
- */
- sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
- sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
-
- /* flash_base_addr is byte-aligned */
- nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
-
- /*
- * find total size of the NVM, then cut in half since the total
- * size represents two separate NVM banks.
- */
- nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
- << FLASH_SECTOR_ADDR_SHIFT;
- nvm->flash_bank_size /= 2;
- /* Adjust to word count */
- nvm->flash_bank_size /= sizeof(u16);
-
- nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
-
- /* Clear shadow ram */
- for (i = 0; i < nvm->word_size; i++) {
- dev_spec->shadow_ram[i].modified = false;
- dev_spec->shadow_ram[i].value = 0xFFFF;
- }
-
- return 0;
-}
-
-/**
- * e1000_init_mac_params_ich8lan - Initialize MAC function pointers
- * @hw: pointer to the HW structure
- *
- * Initialize family-specific MAC parameters and function
- * pointers.
- **/
-static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &hw->mac;
-
- /* Set media type function pointer */
- hw->phy.media_type = e1000_media_type_copper;
-
- /* Set mta register count */
- mac->mta_reg_count = 32;
- /* Set rar entry count */
- mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
- if (mac->type == e1000_ich8lan)
- mac->rar_entry_count--;
- /* FWSM register */
- mac->has_fwsm = true;
- /* ARC subsystem not supported */
- mac->arc_subsystem_valid = false;
- /* Adaptive IFS supported */
- mac->adaptive_ifs = true;
-
- /* LED operations */
- switch (mac->type) {
- case e1000_ich8lan:
- case e1000_ich9lan:
- case e1000_ich10lan:
- /* check management mode */
- mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
- /* ID LED init */
- mac->ops.id_led_init = e1000e_id_led_init;
- /* blink LED */
- mac->ops.blink_led = e1000e_blink_led_generic;
- /* setup LED */
- mac->ops.setup_led = e1000e_setup_led_generic;
- /* cleanup LED */
- mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
- /* turn on/off LED */
- mac->ops.led_on = e1000_led_on_ich8lan;
- mac->ops.led_off = e1000_led_off_ich8lan;
- break;
- case e1000_pchlan:
- case e1000_pch2lan:
- /* check management mode */
- mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
- /* ID LED init */
- mac->ops.id_led_init = e1000_id_led_init_pchlan;
- /* setup LED */
- mac->ops.setup_led = e1000_setup_led_pchlan;
- /* cleanup LED */
- mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
- /* turn on/off LED */
- mac->ops.led_on = e1000_led_on_pchlan;
- mac->ops.led_off = e1000_led_off_pchlan;
- break;
- default:
- break;
- }
-
- /* Enable PCS Lock-loss workaround for ICH8 */
- if (mac->type == e1000_ich8lan)
- e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
-
- /* Gate automatic PHY configuration by hardware on managed 82579 */
- if ((mac->type == e1000_pch2lan) &&
- (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
- e1000_gate_hw_phy_config_ich8lan(hw, true);
-
- return 0;
-}
-
-/**
- * e1000_set_eee_pchlan - Enable/disable EEE support
- * @hw: pointer to the HW structure
- *
- * Enable/disable EEE based on setting in dev_spec structure. The bits in
- * the LPI Control register will remain set only if/when link is up.
- **/
-static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 phy_reg;
-
- if (hw->phy.type != e1000_phy_82579)
- goto out;
-
- ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
- if (ret_val)
- goto out;
-
- if (hw->dev_spec.ich8lan.eee_disable)
- phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
- else
- phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
-
- ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
-out:
- return ret_val;
-}
-
-/**
- * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
- * @hw: pointer to the HW structure
- *
- * Checks to see of the link status of the hardware has changed. If a
- * change in link status has been detected, then we read the PHY registers
- * to get the current speed/duplex if link exists.
- **/
-static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- bool link;
-
- /*
- * We only want to go out to the PHY registers to see if Auto-Neg
- * has completed and/or if our link status has changed. The
- * get_link_status flag is set upon receiving a Link Status
- * Change or Rx Sequence Error interrupt.
- */
- if (!mac->get_link_status) {
- ret_val = 0;
- goto out;
- }
-
- /*
- * First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
- * of the PHY.
- */
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (hw->mac.type == e1000_pchlan) {
- ret_val = e1000_k1_gig_workaround_hv(hw, link);
- if (ret_val)
- goto out;
- }
-
- if (!link)
- goto out; /* No link detected */
-
- mac->get_link_status = false;
-
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = e1000_link_stall_workaround_hv(hw);
- if (ret_val)
- goto out;
- }
-
- if (hw->mac.type == e1000_pch2lan) {
- ret_val = e1000_k1_workaround_lv(hw);
- if (ret_val)
- goto out;
- }
-
- /*
- * Check if there was DownShift, must be checked
- * immediately after link-up
- */
- e1000e_check_downshift(hw);
-
- /* Enable/Disable EEE after link up */
- ret_val = e1000_set_eee_pchlan(hw);
- if (ret_val)
- goto out;
-
- /*
- * If we are forcing speed/duplex, then we simply return since
- * we have already determined whether we have link or not.
- */
- if (!mac->autoneg) {
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- /*
- * Auto-Neg is enabled. Auto Speed Detection takes care
- * of MAC speed/duplex configuration. So we only need to
- * configure Collision Distance in the MAC.
- */
- e1000e_config_collision_dist(hw);
-
- /*
- * Configure Flow Control now that Auto-Neg has completed.
- * First, we need to restore the desired flow control
- * settings because we may have had to re-autoneg with a
- * different link partner.
- */
- ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val)
- e_dbg("Error configuring flow control\n");
-
-out:
- return ret_val;
-}
-
-static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- s32 rc;
-
- rc = e1000_init_mac_params_ich8lan(adapter);
- if (rc)
- return rc;
-
- rc = e1000_init_nvm_params_ich8lan(hw);
- if (rc)
- return rc;
-
- switch (hw->mac.type) {
- case e1000_ich8lan:
- case e1000_ich9lan:
- case e1000_ich10lan:
- rc = e1000_init_phy_params_ich8lan(hw);
- break;
- case e1000_pchlan:
- case e1000_pch2lan:
- rc = e1000_init_phy_params_pchlan(hw);
- break;
- default:
- break;
- }
- if (rc)
- return rc;
-
- /*
- * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
- * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
- */
- if ((adapter->hw.phy.type == e1000_phy_ife) ||
- ((adapter->hw.mac.type >= e1000_pch2lan) &&
- (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
- adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
- adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
-
- hw->mac.ops.blink_led = NULL;
- }
-
- if ((adapter->hw.mac.type == e1000_ich8lan) &&
- (adapter->hw.phy.type == e1000_phy_igp_3))
- adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
-
- /* Disable EEE by default until IEEE802.3az spec is finalized */
- if (adapter->flags2 & FLAG2_HAS_EEE)
- adapter->hw.dev_spec.ich8lan.eee_disable = true;
-
- return 0;
-}
-
-static DEFINE_MUTEX(nvm_mutex);
-
-/**
- * e1000_acquire_nvm_ich8lan - Acquire NVM mutex
- * @hw: pointer to the HW structure
- *
- * Acquires the mutex for performing NVM operations.
- **/
-static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
-{
- mutex_lock(&nvm_mutex);
-
- return 0;
-}
-
-/**
- * e1000_release_nvm_ich8lan - Release NVM mutex
- * @hw: pointer to the HW structure
- *
- * Releases the mutex used while performing NVM operations.
- **/
-static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
-{
- mutex_unlock(&nvm_mutex);
-}
-
-static DEFINE_MUTEX(swflag_mutex);
-
-/**
- * e1000_acquire_swflag_ich8lan - Acquire software control flag
- * @hw: pointer to the HW structure
- *
- * Acquires the software control flag for performing PHY and select
- * MAC CSR accesses.
- **/
-static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
-{
- u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
- s32 ret_val = 0;
-
- mutex_lock(&swflag_mutex);
-
- while (timeout) {
- extcnf_ctrl = er32(EXTCNF_CTRL);
- if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
- break;
-
- mdelay(1);
- timeout--;
- }
-
- if (!timeout) {
- e_dbg("SW/FW/HW has locked the resource for too long.\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- timeout = SW_FLAG_TIMEOUT;
-
- extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
-
- while (timeout) {
- extcnf_ctrl = er32(EXTCNF_CTRL);
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
- break;
-
- mdelay(1);
- timeout--;
- }
-
- if (!timeout) {
- e_dbg("Failed to acquire the semaphore.\n");
- extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
-out:
- if (ret_val)
- mutex_unlock(&swflag_mutex);
-
- return ret_val;
-}
-
-/**
- * e1000_release_swflag_ich8lan - Release software control flag
- * @hw: pointer to the HW structure
- *
- * Releases the software control flag for performing PHY and select
- * MAC CSR accesses.
- **/
-static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
-{
- u32 extcnf_ctrl;
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
-
- if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
- extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- } else {
- e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
- }
-
- mutex_unlock(&swflag_mutex);
-}
-
-/**
- * e1000_check_mng_mode_ich8lan - Checks management mode
- * @hw: pointer to the HW structure
- *
- * This checks if the adapter has any manageability enabled.
- * This is a function pointer entry point only called by read/write
- * routines for the PHY and NVM parts.
- **/
-static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
-{
- u32 fwsm;
-
- fwsm = er32(FWSM);
- return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
-}
-
-/**
- * e1000_check_mng_mode_pchlan - Checks management mode
- * @hw: pointer to the HW structure
- *
- * This checks if the adapter has iAMT enabled.
- * This is a function pointer entry point only called by read/write
- * routines for the PHY and NVM parts.
- **/
-static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
-{
- u32 fwsm;
-
- fwsm = er32(FWSM);
- return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
- (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
-}
-
-/**
- * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
- * @hw: pointer to the HW structure
- *
- * Checks if firmware is blocking the reset of the PHY.
- * This is a function pointer entry point only called by
- * reset routines.
- **/
-static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
-{
- u32 fwsm;
-
- fwsm = er32(FWSM);
-
- return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
-}
-
-/**
- * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
- * @hw: pointer to the HW structure
- *
- * Assumes semaphore already acquired.
- *
- **/
-static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
-{
- u16 phy_data;
- u32 strap = er32(STRAP);
- s32 ret_val = 0;
-
- strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
-
- ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data &= ~HV_SMB_ADDR_MASK;
- phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
- phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
- ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
- * @hw: pointer to the HW structure
- *
- * SW should configure the LCD from the NVM extended configuration region
- * as a workaround for certain parts.
- **/
-static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
- s32 ret_val = 0;
- u16 word_addr, reg_data, reg_addr, phy_page = 0;
-
- /*
- * Initialize the PHY from the NVM on ICH platforms. This
- * is needed due to an issue where the NVM configuration is
- * not properly autoloaded after power transitions.
- * Therefore, after each PHY reset, we will load the
- * configuration data out of the NVM manually.
- */
- switch (hw->mac.type) {
- case e1000_ich8lan:
- if (phy->type != e1000_phy_igp_3)
- return ret_val;
-
- if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
- break;
- }
- /* Fall-thru */
- case e1000_pchlan:
- case e1000_pch2lan:
- sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
- break;
- default:
- return ret_val;
- }
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- data = er32(FEXTNVM);
- if (!(data & sw_cfg_mask))
- goto out;
-
- /*
- * Make sure HW does not configure LCD from PHY
- * extended configuration before SW configuration
- */
- data = er32(EXTCNF_CTRL);
- if (!(hw->mac.type == e1000_pch2lan)) {
- if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
- goto out;
- }
-
- cnf_size = er32(EXTCNF_SIZE);
- cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
- cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
- if (!cnf_size)
- goto out;
-
- cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
- cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
-
- if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
- (hw->mac.type == e1000_pchlan)) ||
- (hw->mac.type == e1000_pch2lan)) {
- /*
- * HW configures the SMBus address and LEDs when the
- * OEM and LCD Write Enable bits are set in the NVM.
- * When both NVM bits are cleared, SW will configure
- * them instead.
- */
- ret_val = e1000_write_smbus_addr(hw);
- if (ret_val)
- goto out;
-
- data = er32(LEDCTL);
- ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
- (u16)data);
- if (ret_val)
- goto out;
- }
-
- /* Configure LCD from extended configuration region. */
-
- /* cnf_base_addr is in DWORD */
- word_addr = (u16)(cnf_base_addr << 1);
-
- for (i = 0; i < cnf_size; i++) {
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
- ®_data);
- if (ret_val)
- goto out;
-
- ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
- 1, ®_addr);
- if (ret_val)
- goto out;
-
- /* Save off the PHY page for future writes. */
- if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
- phy_page = reg_data;
- continue;
- }
-
- reg_addr &= PHY_REG_MASK;
- reg_addr |= phy_page;
-
- ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr,
- reg_data);
- if (ret_val)
- goto out;
- }
-
-out:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * e1000_k1_gig_workaround_hv - K1 Si workaround
- * @hw: pointer to the HW structure
- * @link: link up bool flag
- *
- * If K1 is enabled for 1Gbps, the MAC might stall when transitioning
- * from a lower speed. This workaround disables K1 whenever link is at 1Gig
- * If link is down, the function will restore the default K1 setting located
- * in the NVM.
- **/
-static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
-{
- s32 ret_val = 0;
- u16 status_reg = 0;
- bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
-
- if (hw->mac.type != e1000_pchlan)
- goto out;
-
- /* Wrap the whole flow with the sw flag */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
- if (link) {
- if (hw->phy.type == e1000_phy_82578) {
- ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
- &status_reg);
- if (ret_val)
- goto release;
-
- status_reg &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
-
- if (status_reg == (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
- k1_enable = false;
- }
-
- if (hw->phy.type == e1000_phy_82577) {
- ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
- &status_reg);
- if (ret_val)
- goto release;
-
- status_reg &= HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_MASK;
-
- if (status_reg == (HV_M_STATUS_LINK_UP |
- HV_M_STATUS_AUTONEG_COMPLETE |
- HV_M_STATUS_SPEED_1000))
- k1_enable = false;
- }
-
- /* Link stall fix for link up */
- ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x0100);
- if (ret_val)
- goto release;
-
- } else {
- /* Link stall fix for link down */
- ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
- 0x4100);
- if (ret_val)
- goto release;
- }
-
- ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
-
-release:
- hw->phy.ops.release(hw);
-out:
- return ret_val;
-}
-
-/**
- * e1000_configure_k1_ich8lan - Configure K1 power state
- * @hw: pointer to the HW structure
- * @enable: K1 state to configure
- *
- * Configure the K1 power state based on the provided parameter.
- * Assumes semaphore already acquired.
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- **/
-s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
-{
- s32 ret_val = 0;
- u32 ctrl_reg = 0;
- u32 ctrl_ext = 0;
- u32 reg = 0;
- u16 kmrn_reg = 0;
-
- ret_val = e1000e_read_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- &kmrn_reg);
- if (ret_val)
- goto out;
-
- if (k1_enable)
- kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
- else
- kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
-
- ret_val = e1000e_write_kmrn_reg_locked(hw,
- E1000_KMRNCTRLSTA_K1_CONFIG,
- kmrn_reg);
- if (ret_val)
- goto out;
-
- udelay(20);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_reg = er32(CTRL);
-
- reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- reg |= E1000_CTRL_FRCSPD;
- ew32(CTRL, reg);
-
- ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
- e1e_flush();
- udelay(20);
- ew32(CTRL, ctrl_reg);
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
- udelay(20);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
- * @hw: pointer to the HW structure
- * @d0_state: boolean if entering d0 or d3 device state
- *
- * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
- * collectively called OEM bits. The OEM Write Enable bit and SW Config bit
- * in NVM determines whether HW should configure LPLU and Gbe Disable.
- **/
-static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
-{
- s32 ret_val = 0;
- u32 mac_reg;
- u16 oem_reg;
-
- if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
- return ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- if (!(hw->mac.type == e1000_pch2lan)) {
- mac_reg = er32(EXTCNF_CTRL);
- if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
- goto out;
- }
-
- mac_reg = er32(FEXTNVM);
- if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
- goto out;
-
- mac_reg = er32(PHY_CTRL);
-
- ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg);
- if (ret_val)
- goto out;
-
- oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
-
- if (d0_state) {
- if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
- oem_reg |= HV_OEM_BITS_GBE_DIS;
-
- if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
- oem_reg |= HV_OEM_BITS_LPLU;
- } else {
- if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
- oem_reg |= HV_OEM_BITS_GBE_DIS;
-
- if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
- oem_reg |= HV_OEM_BITS_LPLU;
- }
- /* Restart auto-neg to activate the bits */
- if (!e1000_check_reset_block(hw))
- oem_reg |= HV_OEM_BITS_RESTART_AN;
- ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
-
-out:
- hw->phy.ops.release(hw);
-
- return ret_val;
-}
-
-
-/**
- * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 data;
-
- ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data |= HV_KMRN_MDIO_SLOW;
-
- ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
-
- return ret_val;
-}
-
-/**
- * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
- * done after every PHY reset.
- **/
-static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 phy_data;
-
- if (hw->mac.type != e1000_pchlan)
- return ret_val;
-
- /* Set MDIO slow mode before any other MDIO access */
- if (hw->phy.type == e1000_phy_82577) {
- ret_val = e1000_set_mdio_slow_mode_hv(hw);
- if (ret_val)
- goto out;
- }
-
- if (((hw->phy.type == e1000_phy_82577) &&
- ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
- ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
- /* Disable generation of early preamble */
- ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
- if (ret_val)
- return ret_val;
-
- /* Preamble tuning for SSC */
- ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
- if (ret_val)
- return ret_val;
- }
-
- if (hw->phy.type == e1000_phy_82578) {
- /*
- * Return registers to default by doing a soft reset then
- * writing 0x3140 to the control register.
- */
- if (hw->phy.revision < 2) {
- e1000e_phy_sw_reset(hw);
- ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140);
- }
- }
-
- /* Select page 0 */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- hw->phy.addr = 1;
- ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
- hw->phy.ops.release(hw);
- if (ret_val)
- goto out;
-
- /*
- * Configure the K1 Si workaround during phy reset assuming there is
- * link so that it disables K1 if link is in 1Gbps.
- */
- ret_val = e1000_k1_gig_workaround_hv(hw, true);
- if (ret_val)
- goto out;
-
- /* Workaround for link disconnects on a busy hub in half duplex */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.write_reg_locked(hw, BM_PORT_GEN_CFG,
- phy_data & 0x00FF);
-release:
- hw->phy.ops.release(hw);
-out:
- return ret_val;
-}
-
-/**
- * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
- * @hw: pointer to the HW structure
- **/
-void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
-{
- u32 mac_reg;
- u16 i, phy_reg = 0;
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return;
- ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
- if (ret_val)
- goto release;
-
- /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
- for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
- mac_reg = er32(RAL(i));
- hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
- (u16)(mac_reg & 0xFFFF));
- hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
- (u16)((mac_reg >> 16) & 0xFFFF));
-
- mac_reg = er32(RAH(i));
- hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
- (u16)(mac_reg & 0xFFFF));
- hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
- (u16)((mac_reg & E1000_RAH_AV)
- >> 16));
- }
-
- e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
-
-release:
- hw->phy.ops.release(hw);
-}
-
-/**
- * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
- * with 82579 PHY
- * @hw: pointer to the HW structure
- * @enable: flag to enable/disable workaround when enabling/disabling jumbos
- **/
-s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
-{
- s32 ret_val = 0;
- u16 phy_reg, data;
- u32 mac_reg;
- u16 i;
-
- if (hw->mac.type != e1000_pch2lan)
- goto out;
-
- /* disable Rx path while enabling/disabling workaround */
- e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
- ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
- if (ret_val)
- goto out;
-
- if (enable) {
- /*
- * Write Rx addresses (rar_entry_count for RAL/H, +4 for
- * SHRAL/H) and initial CRC values to the MAC
- */
- for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
- u8 mac_addr[ETH_ALEN] = {0};
- u32 addr_high, addr_low;
-
- addr_high = er32(RAH(i));
- if (!(addr_high & E1000_RAH_AV))
- continue;
- addr_low = er32(RAL(i));
- mac_addr[0] = (addr_low & 0xFF);
- mac_addr[1] = ((addr_low >> 8) & 0xFF);
- mac_addr[2] = ((addr_low >> 16) & 0xFF);
- mac_addr[3] = ((addr_low >> 24) & 0xFF);
- mac_addr[4] = (addr_high & 0xFF);
- mac_addr[5] = ((addr_high >> 8) & 0xFF);
-
- ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
- }
-
- /* Write Rx addresses to the PHY */
- e1000_copy_rx_addrs_to_phy_ich8lan(hw);
-
- /* Enable jumbo frame workaround in the MAC */
- mac_reg = er32(FFLT_DBG);
- mac_reg &= ~(1 << 14);
- mac_reg |= (7 << 15);
- ew32(FFLT_DBG, mac_reg);
-
- mac_reg = er32(RCTL);
- mac_reg |= E1000_RCTL_SECRC;
- ew32(RCTL, mac_reg);
-
- ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
- if (ret_val)
- goto out;
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- data | (1 << 0));
- if (ret_val)
- goto out;
- ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
- if (ret_val)
- goto out;
- data &= ~(0xF << 8);
- data |= (0xB << 8);
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- data);
- if (ret_val)
- goto out;
-
- /* Enable jumbo frame workaround in the PHY */
- e1e_rphy(hw, PHY_REG(769, 23), &data);
- data &= ~(0x7F << 5);
- data |= (0x37 << 5);
- ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
- if (ret_val)
- goto out;
- e1e_rphy(hw, PHY_REG(769, 16), &data);
- data &= ~(1 << 13);
- ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
- if (ret_val)
- goto out;
- e1e_rphy(hw, PHY_REG(776, 20), &data);
- data &= ~(0x3FF << 2);
- data |= (0x1A << 2);
- ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
- if (ret_val)
- goto out;
- ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
- if (ret_val)
- goto out;
- e1e_rphy(hw, HV_PM_CTRL, &data);
- ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
- if (ret_val)
- goto out;
- } else {
- /* Write MAC register values back to h/w defaults */
- mac_reg = er32(FFLT_DBG);
- mac_reg &= ~(0xF << 14);
- ew32(FFLT_DBG, mac_reg);
-
- mac_reg = er32(RCTL);
- mac_reg &= ~E1000_RCTL_SECRC;
- ew32(RCTL, mac_reg);
-
- ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- &data);
- if (ret_val)
- goto out;
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_CTRL_OFFSET,
- data & ~(1 << 0));
- if (ret_val)
- goto out;
- ret_val = e1000e_read_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- &data);
- if (ret_val)
- goto out;
- data &= ~(0xF << 8);
- data |= (0xB << 8);
- ret_val = e1000e_write_kmrn_reg(hw,
- E1000_KMRNCTRLSTA_HD_CTRL,
- data);
- if (ret_val)
- goto out;
-
- /* Write PHY register values back to h/w defaults */
- e1e_rphy(hw, PHY_REG(769, 23), &data);
- data &= ~(0x7F << 5);
- ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
- if (ret_val)
- goto out;
- e1e_rphy(hw, PHY_REG(769, 16), &data);
- data |= (1 << 13);
- ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
- if (ret_val)
- goto out;
- e1e_rphy(hw, PHY_REG(776, 20), &data);
- data &= ~(0x3FF << 2);
- data |= (0x8 << 2);
- ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
- if (ret_val)
- goto out;
- ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
- if (ret_val)
- goto out;
- e1e_rphy(hw, HV_PM_CTRL, &data);
- ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
- if (ret_val)
- goto out;
- }
-
- /* re-enable Rx path after enabling/disabling workaround */
- ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
- * done after every PHY reset.
- **/
-static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- if (hw->mac.type != e1000_pch2lan)
- goto out;
-
- /* Set MDIO slow mode before any other MDIO access */
- ret_val = e1000_set_mdio_slow_mode_hv(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_k1_gig_workaround_lv - K1 Si workaround
- * @hw: pointer to the HW structure
- *
- * Workaround to set the K1 beacon duration for 82579 parts
- **/
-static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 status_reg = 0;
- u32 mac_reg;
-
- if (hw->mac.type != e1000_pch2lan)
- goto out;
-
- /* Set K1 beacon duration based on 1Gbps speed or otherwise */
- ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
- if (ret_val)
- goto out;
-
- if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
- == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
- mac_reg = er32(FEXTNVM4);
- mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
-
- if (status_reg & HV_M_STATUS_SPEED_1000)
- mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
- else
- mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
-
- ew32(FEXTNVM4, mac_reg);
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
- * @hw: pointer to the HW structure
- * @gate: boolean set to true to gate, false to ungate
- *
- * Gate/ungate the automatic PHY configuration via hardware; perform
- * the configuration via software instead.
- **/
-static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
-{
- u32 extcnf_ctrl;
-
- if (hw->mac.type != e1000_pch2lan)
- return;
-
- extcnf_ctrl = er32(EXTCNF_CTRL);
-
- if (gate)
- extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
- else
- extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
-
- ew32(EXTCNF_CTRL, extcnf_ctrl);
- return;
-}
-
-/**
- * e1000_lan_init_done_ich8lan - Check for PHY config completion
- * @hw: pointer to the HW structure
- *
- * Check the appropriate indication the MAC has finished configuring the
- * PHY after a software reset.
- **/
-static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
-{
- u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
-
- /* Wait for basic configuration completes before proceeding */
- do {
- data = er32(STATUS);
- data &= E1000_STATUS_LAN_INIT_DONE;
- udelay(100);
- } while ((!data) && --loop);
-
- /*
- * If basic configuration is incomplete before the above loop
- * count reaches 0, loading the configuration from NVM will
- * leave the PHY in a bad state possibly resulting in no link.
- */
- if (loop == 0)
- e_dbg("LAN_INIT_DONE not set, increase timeout\n");
-
- /* Clear the Init Done bit for the next init event */
- data = er32(STATUS);
- data &= ~E1000_STATUS_LAN_INIT_DONE;
- ew32(STATUS, data);
-}
-
-/**
- * e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 reg;
-
- if (e1000_check_reset_block(hw))
- goto out;
-
- /* Allow time for h/w to get to quiescent state after reset */
- usleep_range(10000, 20000);
-
- /* Perform any necessary post-reset workarounds */
- switch (hw->mac.type) {
- case e1000_pchlan:
- ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
- if (ret_val)
- goto out;
- break;
- case e1000_pch2lan:
- ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
- if (ret_val)
- goto out;
- break;
- default:
- break;
- }
-
- /* Clear the host wakeup bit after lcd reset */
- if (hw->mac.type >= e1000_pchlan) {
- e1e_rphy(hw, BM_PORT_GEN_CFG, ®);
- reg &= ~BM_WUC_HOST_WU_BIT;
- e1e_wphy(hw, BM_PORT_GEN_CFG, reg);
- }
-
- /* Configure the LCD with the extended configuration region in NVM */
- ret_val = e1000_sw_lcd_config_ich8lan(hw);
- if (ret_val)
- goto out;
-
- /* Configure the LCD with the OEM bits in NVM */
- ret_val = e1000_oem_bits_config_ich8lan(hw, true);
-
- if (hw->mac.type == e1000_pch2lan) {
- /* Ungate automatic PHY configuration on non-managed 82579 */
- if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
- usleep_range(10000, 20000);
- e1000_gate_hw_phy_config_ich8lan(hw, false);
- }
-
- /* Set EEE LPI Update Timer to 200usec */
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
- I82579_LPI_UPDATE_TIMER);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA,
- 0x1387);
-release:
- hw->phy.ops.release(hw);
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_phy_hw_reset_ich8lan - Performs a PHY reset
- * @hw: pointer to the HW structure
- *
- * Resets the PHY
- * This is a function pointer entry point called by drivers
- * or other shared routines.
- **/
-static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- /* Gate automatic PHY configuration by hardware on non-managed 82579 */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
- e1000_gate_hw_phy_config_ich8lan(hw, true);
-
- ret_val = e1000e_phy_hw_reset_generic(hw);
- if (ret_val)
- goto out;
-
- ret_val = e1000_post_phy_reset_ich8lan(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_set_lplu_state_pchlan - Set Low Power Link Up state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU state according to the active flag. For PCH, if OEM write
- * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
- * the phy speed. This function will manually set the LPLU bit and restart
- * auto-neg as hw would do. D3 and D0 LPLU will call the same function
- * since it configures the same bit.
- **/
-static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
-{
- s32 ret_val = 0;
- u16 oem_reg;
-
- ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
- if (ret_val)
- goto out;
-
- if (active)
- oem_reg |= HV_OEM_BITS_LPLU;
- else
- oem_reg &= ~HV_OEM_BITS_LPLU;
-
- oem_reg |= HV_OEM_BITS_RESTART_AN;
- ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU D0 state according to the active flag. When
- * activating LPLU this function also disables smart speed
- * and vice versa. LPLU will not be activated unless the
- * device autonegotiation advertisement meets standards of
- * either 10 or 10/100 or 10/100/1000 at all duplexes.
- * This is a function pointer entry point only called by
- * PHY setup routines.
- **/
-static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 phy_ctrl;
- s32 ret_val = 0;
- u16 data;
-
- if (phy->type == e1000_phy_ife)
- return ret_val;
-
- phy_ctrl = er32(PHY_CTRL);
-
- if (active) {
- phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
-
- if (phy->type != e1000_phy_igp_3)
- return 0;
-
- /*
- * Call gig speed drop workaround on LPLU before accessing
- * any PHY registers
- */
- if (hw->mac.type == e1000_ich8lan)
- e1000e_gig_downshift_workaround_ich8lan(hw);
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
- if (ret_val)
- return ret_val;
- } else {
- phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
-
- if (phy->type != e1000_phy_igp_3)
- return 0;
-
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU D3 state according to the active flag. When
- * activating LPLU this function also disables smart speed
- * and vice versa. LPLU will not be activated unless the
- * device autonegotiation advertisement meets standards of
- * either 10 or 10/100 or 10/100/1000 at all duplexes.
- * This is a function pointer entry point only called by
- * PHY setup routines.
- **/
-static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 phy_ctrl;
- s32 ret_val;
- u16 data;
-
- phy_ctrl = er32(PHY_CTRL);
-
- if (!active) {
- phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
-
- if (phy->type != e1000_phy_igp_3)
- return 0;
-
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- }
- } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
- (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
- (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
- phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
- ew32(PHY_CTRL, phy_ctrl);
-
- if (phy->type != e1000_phy_igp_3)
- return 0;
-
- /*
- * Call gig speed drop workaround on LPLU before accessing
- * any PHY registers
- */
- if (hw->mac.type == e1000_ich8lan)
- e1000e_gig_downshift_workaround_ich8lan(hw);
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
- }
-
- return 0;
-}
-
-/**
- * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
- * @hw: pointer to the HW structure
- * @bank: pointer to the variable that returns the active bank
- *
- * Reads signature byte from the NVM using the flash access registers.
- * Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
- **/
-static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
-{
- u32 eecd;
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
- u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
- u8 sig_byte = 0;
- s32 ret_val = 0;
-
- switch (hw->mac.type) {
- case e1000_ich8lan:
- case e1000_ich9lan:
- eecd = er32(EECD);
- if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
- E1000_EECD_SEC1VAL_VALID_MASK) {
- if (eecd & E1000_EECD_SEC1VAL)
- *bank = 1;
- else
- *bank = 0;
-
- return 0;
- }
- e_dbg("Unable to determine valid NVM bank via EEC - "
- "reading flash signature\n");
- /* fall-thru */
- default:
- /* set bank to 0 in case flash read fails */
- *bank = 0;
-
- /* Check bank 0 */
- ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
- &sig_byte);
- if (ret_val)
- return ret_val;
- if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
- E1000_ICH_NVM_SIG_VALUE) {
- *bank = 0;
- return 0;
- }
-
- /* Check bank 1 */
- ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
- bank1_offset,
- &sig_byte);
- if (ret_val)
- return ret_val;
- if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
- E1000_ICH_NVM_SIG_VALUE) {
- *bank = 1;
- return 0;
- }
-
- e_dbg("ERROR: No valid NVM bank present\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000_read_nvm_ich8lan - Read word(s) from the NVM
- * @hw: pointer to the HW structure
- * @offset: The offset (in bytes) of the word(s) to read.
- * @words: Size of data to read in words
- * @data: Pointer to the word(s) to read at offset.
- *
- * Reads a word(s) from the NVM using the flash access registers.
- **/
-static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u32 act_offset;
- s32 ret_val = 0;
- u32 bank = 0;
- u16 i, word;
-
- if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
- nvm->ops.acquire(hw);
-
- ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
- if (ret_val) {
- e_dbg("Could not detect valid bank, assuming bank 0\n");
- bank = 0;
- }
-
- act_offset = (bank) ? nvm->flash_bank_size : 0;
- act_offset += offset;
-
- ret_val = 0;
- for (i = 0; i < words; i++) {
- if (dev_spec->shadow_ram[offset+i].modified) {
- data[i] = dev_spec->shadow_ram[offset+i].value;
- } else {
- ret_val = e1000_read_flash_word_ich8lan(hw,
- act_offset + i,
- &word);
- if (ret_val)
- break;
- data[i] = word;
- }
- }
-
- nvm->ops.release(hw);
-
-out:
- if (ret_val)
- e_dbg("NVM read error: %d\n", ret_val);
-
- return ret_val;
-}
-
-/**
- * e1000_flash_cycle_init_ich8lan - Initialize flash
- * @hw: pointer to the HW structure
- *
- * This function does initial flash setup so that a new read/write/erase cycle
- * can be started.
- **/
-static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
-{
- union ich8_hws_flash_status hsfsts;
- s32 ret_val = -E1000_ERR_NVM;
-
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-
- /* Check if the flash descriptor is valid */
- if (hsfsts.hsf_status.fldesvalid == 0) {
- e_dbg("Flash descriptor invalid. "
- "SW Sequencing must be used.\n");
- return -E1000_ERR_NVM;
- }
-
- /* Clear FCERR and DAEL in hw status by writing 1 */
- hsfsts.hsf_status.flcerr = 1;
- hsfsts.hsf_status.dael = 1;
-
- ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
-
- /*
- * Either we should have a hardware SPI cycle in progress
- * bit to check against, in order to start a new cycle or
- * FDONE bit should be changed in the hardware so that it
- * is 1 after hardware reset, which can then be used as an
- * indication whether a cycle is in progress or has been
- * completed.
- */
-
- if (hsfsts.hsf_status.flcinprog == 0) {
- /*
- * There is no cycle running at present,
- * so we can start a cycle.
- * Begin by setting Flash Cycle Done.
- */
- hsfsts.hsf_status.flcdone = 1;
- ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
- ret_val = 0;
- } else {
- s32 i = 0;
-
- /*
- * Otherwise poll for sometime so the current
- * cycle has a chance to end before giving up.
- */
- for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
- hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcinprog == 0) {
- ret_val = 0;
- break;
- }
- udelay(1);
- }
- if (ret_val == 0) {
- /*
- * Successful in waiting for previous cycle to timeout,
- * now set the Flash Cycle Done.
- */
- hsfsts.hsf_status.flcdone = 1;
- ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
- } else {
- e_dbg("Flash controller busy, cannot get access\n");
- }
- }
-
- return ret_val;
-}
-
-/**
- * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
- * @hw: pointer to the HW structure
- * @timeout: maximum time to wait for completion
- *
- * This function starts a flash cycle and waits for its completion.
- **/
-static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
-{
- union ich8_hws_flash_ctrl hsflctl;
- union ich8_hws_flash_status hsfsts;
- s32 ret_val = -E1000_ERR_NVM;
- u32 i = 0;
-
- /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
- hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
- hsflctl.hsf_ctrl.flcgo = 1;
- ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /* wait till FDONE bit is set to 1 */
- do {
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcdone == 1)
- break;
- udelay(1);
- } while (i++ < timeout);
-
- if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
- return 0;
-
- return ret_val;
-}
-
-/**
- * e1000_read_flash_word_ich8lan - Read word from flash
- * @hw: pointer to the HW structure
- * @offset: offset to data location
- * @data: pointer to the location for storing the data
- *
- * Reads the flash word at offset into data. Offset is converted
- * to bytes before read.
- **/
-static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
- u16 *data)
-{
- /* Must convert offset into bytes. */
- offset <<= 1;
-
- return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
-}
-
-/**
- * e1000_read_flash_byte_ich8lan - Read byte from flash
- * @hw: pointer to the HW structure
- * @offset: The offset of the byte to read.
- * @data: Pointer to a byte to store the value read.
- *
- * Reads a single byte from the NVM using the flash access registers.
- **/
-static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 *data)
-{
- s32 ret_val;
- u16 word = 0;
-
- ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
- if (ret_val)
- return ret_val;
-
- *data = (u8)word;
-
- return 0;
-}
-
-/**
- * e1000_read_flash_data_ich8lan - Read byte or word from NVM
- * @hw: pointer to the HW structure
- * @offset: The offset (in bytes) of the byte or word to read.
- * @size: Size of data to read, 1=byte 2=word
- * @data: Pointer to the word to store the value read.
- *
- * Reads a byte or word from the NVM using the flash access registers.
- **/
-static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 size, u16 *data)
-{
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_addr;
- u32 flash_data = 0;
- s32 ret_val = -E1000_ERR_NVM;
- u8 count = 0;
-
- if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
- return -E1000_ERR_NVM;
-
- flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
-
- do {
- udelay(1);
- /* Steps */
- ret_val = e1000_flash_cycle_init_ich8lan(hw);
- if (ret_val != 0)
- break;
-
- hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
- /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size - 1;
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
- ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
-
- ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
-
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_READ_COMMAND_TIMEOUT);
-
- /*
- * Check if FCERR is set to 1, if set to 1, clear it
- * and try the whole sequence a few more times, else
- * read in (shift in) the Flash Data0, the order is
- * least significant byte first msb to lsb
- */
- if (ret_val == 0) {
- flash_data = er32flash(ICH_FLASH_FDATA0);
- if (size == 1)
- *data = (u8)(flash_data & 0x000000FF);
- else if (size == 2)
- *data = (u16)(flash_data & 0x0000FFFF);
- break;
- } else {
- /*
- * If we've gotten here, then things are probably
- * completely hosed, but if the error condition is
- * detected, it won't hurt to give it another try...
- * ICH_FLASH_CYCLE_REPEAT_COUNT times.
- */
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1) {
- /* Repeat for some time before giving up. */
- continue;
- } else if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.\n");
- break;
- }
- }
- } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
- return ret_val;
-}
-
-/**
- * e1000_write_nvm_ich8lan - Write word(s) to the NVM
- * @hw: pointer to the HW structure
- * @offset: The offset (in bytes) of the word(s) to write.
- * @words: Size of data to write in words
- * @data: Pointer to the word(s) to write at offset.
- *
- * Writes a byte or word to the NVM using the flash access registers.
- **/
-static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
- u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u16 i;
-
- if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- nvm->ops.acquire(hw);
-
- for (i = 0; i < words; i++) {
- dev_spec->shadow_ram[offset+i].modified = true;
- dev_spec->shadow_ram[offset+i].value = data[i];
- }
-
- nvm->ops.release(hw);
-
- return 0;
-}
-
-/**
- * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
- * @hw: pointer to the HW structure
- *
- * The NVM checksum is updated by calling the generic update_nvm_checksum,
- * which writes the checksum to the shadow ram. The changes in the shadow
- * ram are then committed to the EEPROM by processing each bank at a time
- * checking for the modified bit and writing only the pending changes.
- * After a successful commit, the shadow ram is cleared and is ready for
- * future writes.
- **/
-static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
- s32 ret_val;
- u16 data;
-
- ret_val = e1000e_update_nvm_checksum_generic(hw);
- if (ret_val)
- goto out;
-
- if (nvm->type != e1000_nvm_flash_sw)
- goto out;
-
- nvm->ops.acquire(hw);
-
- /*
- * We're writing to the opposite bank so if we're on bank 1,
- * write to bank 0 etc. We also need to erase the segment that
- * is going to be written
- */
- ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
- if (ret_val) {
- e_dbg("Could not detect valid bank, assuming bank 0\n");
- bank = 0;
- }
-
- if (bank == 0) {
- new_bank_offset = nvm->flash_bank_size;
- old_bank_offset = 0;
- ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
- if (ret_val)
- goto release;
- } else {
- old_bank_offset = nvm->flash_bank_size;
- new_bank_offset = 0;
- ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
- if (ret_val)
- goto release;
- }
-
- for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
- /*
- * Determine whether to write the value stored
- * in the other NVM bank or a modified value stored
- * in the shadow RAM
- */
- if (dev_spec->shadow_ram[i].modified) {
- data = dev_spec->shadow_ram[i].value;
- } else {
- ret_val = e1000_read_flash_word_ich8lan(hw, i +
- old_bank_offset,
- &data);
- if (ret_val)
- break;
- }
-
- /*
- * If the word is 0x13, then make sure the signature bits
- * (15:14) are 11b until the commit has completed.
- * This will allow us to write 10b which indicates the
- * signature is valid. We want to do this after the write
- * has completed so that we don't mark the segment valid
- * while the write is still in progress
- */
- if (i == E1000_ICH_NVM_SIG_WORD)
- data |= E1000_ICH_NVM_SIG_MASK;
-
- /* Convert offset to bytes. */
- act_offset = (i + new_bank_offset) << 1;
-
- udelay(100);
- /* Write the bytes to the new bank. */
- ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
- act_offset,
- (u8)data);
- if (ret_val)
- break;
-
- udelay(100);
- ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
- act_offset + 1,
- (u8)(data >> 8));
- if (ret_val)
- break;
- }
-
- /*
- * Don't bother writing the segment valid bits if sector
- * programming failed.
- */
- if (ret_val) {
- /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
- e_dbg("Flash commit failed.\n");
- goto release;
- }
-
- /*
- * Finally validate the new segment by setting bit 15:14
- * to 10b in word 0x13 , this can be done without an
- * erase as well since these bits are 11 to start with
- * and we need to change bit 14 to 0b
- */
- act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
- ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
- if (ret_val)
- goto release;
-
- data &= 0xBFFF;
- ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
- act_offset * 2 + 1,
- (u8)(data >> 8));
- if (ret_val)
- goto release;
-
- /*
- * And invalidate the previously valid segment by setting
- * its signature word (0x13) high_byte to 0b. This can be
- * done without an erase because flash erase sets all bits
- * to 1's. We can write 1's to 0's without an erase
- */
- act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
- ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
- if (ret_val)
- goto release;
-
- /* Great! Everything worked, we can now clear the cached entries. */
- for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
- dev_spec->shadow_ram[i].modified = false;
- dev_spec->shadow_ram[i].value = 0xFFFF;
- }
-
-release:
- nvm->ops.release(hw);
-
- /*
- * Reload the EEPROM, or else modifications will not appear
- * until after the next adapter reset.
- */
- if (!ret_val) {
- e1000e_reload_nvm(hw);
- usleep_range(10000, 20000);
- }
-
-out:
- if (ret_val)
- e_dbg("NVM update error: %d\n", ret_val);
-
- return ret_val;
-}
-
-/**
- * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
- * If the bit is 0, that the EEPROM had been modified, but the checksum was not
- * calculated, in which case we need to calculate the checksum and set bit 6.
- **/
-static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 data;
-
- /*
- * Read 0x19 and check bit 6. If this bit is 0, the checksum
- * needs to be fixed. This bit is an indication that the NVM
- * was prepared by OEM software and did not calculate the
- * checksum...a likely scenario.
- */
- ret_val = e1000_read_nvm(hw, 0x19, 1, &data);
- if (ret_val)
- return ret_val;
-
- if ((data & 0x40) == 0) {
- data |= 0x40;
- ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_update_nvm_checksum(hw);
- if (ret_val)
- return ret_val;
- }
-
- return e1000e_validate_nvm_checksum_generic(hw);
-}
-
-/**
- * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
- * @hw: pointer to the HW structure
- *
- * To prevent malicious write/erase of the NVM, set it to be read-only
- * so that the hardware ignores all write/erase cycles of the NVM via
- * the flash control registers. The shadow-ram copy of the NVM will
- * still be updated, however any updates to this copy will not stick
- * across driver reloads.
- **/
-void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- union ich8_flash_protected_range pr0;
- union ich8_hws_flash_status hsfsts;
- u32 gfpreg;
-
- nvm->ops.acquire(hw);
-
- gfpreg = er32flash(ICH_FLASH_GFPREG);
-
- /* Write-protect GbE Sector of NVM */
- pr0.regval = er32flash(ICH_FLASH_PR0);
- pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
- pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
- pr0.range.wpe = true;
- ew32flash(ICH_FLASH_PR0, pr0.regval);
-
- /*
- * Lock down a subset of GbE Flash Control Registers, e.g.
- * PR0 to prevent the write-protection from being lifted.
- * Once FLOCKDN is set, the registers protected by it cannot
- * be written until FLOCKDN is cleared by a hardware reset.
- */
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- hsfsts.hsf_status.flockdn = true;
- ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
-
- nvm->ops.release(hw);
-}
-
-/**
- * e1000_write_flash_data_ich8lan - Writes bytes to the NVM
- * @hw: pointer to the HW structure
- * @offset: The offset (in bytes) of the byte/word to read.
- * @size: Size of data to read, 1=byte 2=word
- * @data: The byte(s) to write to the NVM.
- *
- * Writes one/two bytes to the NVM using the flash access registers.
- **/
-static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 size, u16 data)
-{
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_addr;
- u32 flash_data = 0;
- s32 ret_val;
- u8 count = 0;
-
- if (size < 1 || size > 2 || data > size * 0xff ||
- offset > ICH_FLASH_LINEAR_ADDR_MASK)
- return -E1000_ERR_NVM;
-
- flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
- hw->nvm.flash_base_addr;
-
- do {
- udelay(1);
- /* Steps */
- ret_val = e1000_flash_cycle_init_ich8lan(hw);
- if (ret_val)
- break;
-
- hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
- /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
- hsflctl.hsf_ctrl.fldbcount = size -1;
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
- ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
-
- ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
-
- if (size == 1)
- flash_data = (u32)data & 0x00FF;
- else
- flash_data = (u32)data;
-
- ew32flash(ICH_FLASH_FDATA0, flash_data);
-
- /*
- * check if FCERR is set to 1 , if set to 1, clear it
- * and try the whole sequence a few more times else done
- */
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_WRITE_COMMAND_TIMEOUT);
- if (!ret_val)
- break;
-
- /*
- * If we're here, then things are most likely
- * completely hosed, but if the error condition
- * is detected, it won't hurt to give it another
- * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
- */
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
- /* Repeat for some time before giving up. */
- continue;
- if (hsfsts.hsf_status.flcdone == 0) {
- e_dbg("Timeout error - flash cycle "
- "did not complete.");
- break;
- }
- } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
-
- return ret_val;
-}
-
-/**
- * e1000_write_flash_byte_ich8lan - Write a single byte to NVM
- * @hw: pointer to the HW structure
- * @offset: The index of the byte to read.
- * @data: The byte to write to the NVM.
- *
- * Writes a single byte to the NVM using the flash access registers.
- **/
-static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
- u8 data)
-{
- u16 word = (u16)data;
-
- return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
-}
-
-/**
- * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
- * @hw: pointer to the HW structure
- * @offset: The offset of the byte to write.
- * @byte: The byte to write to the NVM.
- *
- * Writes a single byte to the NVM using the flash access registers.
- * Goes through a retry algorithm before giving up.
- **/
-static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
- u32 offset, u8 byte)
-{
- s32 ret_val;
- u16 program_retries;
-
- ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
- if (!ret_val)
- return ret_val;
-
- for (program_retries = 0; program_retries < 100; program_retries++) {
- e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
- udelay(100);
- ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
- if (!ret_val)
- break;
- }
- if (program_retries == 100)
- return -E1000_ERR_NVM;
-
- return 0;
-}
-
-/**
- * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
- * @hw: pointer to the HW structure
- * @bank: 0 for first bank, 1 for second bank, etc.
- *
- * Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
- * bank N is 4096 * N + flash_reg_addr.
- **/
-static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- union ich8_hws_flash_status hsfsts;
- union ich8_hws_flash_ctrl hsflctl;
- u32 flash_linear_addr;
- /* bank size is in 16bit words - adjust to bytes */
- u32 flash_bank_size = nvm->flash_bank_size * 2;
- s32 ret_val;
- s32 count = 0;
- s32 j, iteration, sector_size;
-
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
-
- /*
- * Determine HW Sector size: Read BERASE bits of hw flash status
- * register
- * 00: The Hw sector is 256 bytes, hence we need to erase 16
- * consecutive sectors. The start index for the nth Hw sector
- * can be calculated as = bank * 4096 + n * 256
- * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
- * The start index for the nth Hw sector can be calculated
- * as = bank * 4096
- * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
- * (ich9 only, otherwise error condition)
- * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
- */
- switch (hsfsts.hsf_status.berasesz) {
- case 0:
- /* Hw sector size 256 */
- sector_size = ICH_FLASH_SEG_SIZE_256;
- iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
- break;
- case 1:
- sector_size = ICH_FLASH_SEG_SIZE_4K;
- iteration = 1;
- break;
- case 2:
- sector_size = ICH_FLASH_SEG_SIZE_8K;
- iteration = 1;
- break;
- case 3:
- sector_size = ICH_FLASH_SEG_SIZE_64K;
- iteration = 1;
- break;
- default:
- return -E1000_ERR_NVM;
- }
-
- /* Start with the base address, then add the sector offset. */
- flash_linear_addr = hw->nvm.flash_base_addr;
- flash_linear_addr += (bank) ? flash_bank_size : 0;
-
- for (j = 0; j < iteration ; j++) {
- do {
- /* Steps */
- ret_val = e1000_flash_cycle_init_ich8lan(hw);
- if (ret_val)
- return ret_val;
-
- /*
- * Write a value 11 (block Erase) in Flash
- * Cycle field in hw flash control
- */
- hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
- hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
- ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
-
- /*
- * Write the last 24 bits of an index within the
- * block into Flash Linear address field in Flash
- * Address.
- */
- flash_linear_addr += (j * sector_size);
- ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
-
- ret_val = e1000_flash_cycle_ich8lan(hw,
- ICH_FLASH_ERASE_COMMAND_TIMEOUT);
- if (ret_val == 0)
- break;
-
- /*
- * Check if FCERR is set to 1. If 1,
- * clear it and try the whole sequence
- * a few more times else Done
- */
- hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
- if (hsfsts.hsf_status.flcerr == 1)
- /* repeat for some time before giving up */
- continue;
- else if (hsfsts.hsf_status.flcdone == 0)
- return ret_val;
- } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
- }
-
- return 0;
-}
-
-/**
- * e1000_valid_led_default_ich8lan - Set the default LED settings
- * @hw: pointer to the HW structure
- * @data: Pointer to the LED settings
- *
- * Reads the LED default settings from the NVM to data. If the NVM LED
- * settings is all 0's or F's, set the LED default to a valid LED default
- * setting.
- **/
-static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
-{
- s32 ret_val;
-
- ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
-
- if (*data == ID_LED_RESERVED_0000 ||
- *data == ID_LED_RESERVED_FFFF)
- *data = ID_LED_DEFAULT_ICH8LAN;
-
- return 0;
-}
-
-/**
- * e1000_id_led_init_pchlan - store LED configurations
- * @hw: pointer to the HW structure
- *
- * PCH does not control LEDs via the LEDCTL register, rather it uses
- * the PHY LED configuration register.
- *
- * PCH also does not have an "always on" or "always off" mode which
- * complicates the ID feature. Instead of using the "on" mode to indicate
- * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
- * use "link_up" mode. The LEDs will still ID on request if there is no
- * link based on logic in e1000_led_[on|off]_pchlan().
- **/
-static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
- const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
- u16 data, i, temp, shift;
-
- /* Get default ID LED modes */
- ret_val = hw->nvm.ops.valid_led_default(hw, &data);
- if (ret_val)
- goto out;
-
- mac->ledctl_default = er32(LEDCTL);
- mac->ledctl_mode1 = mac->ledctl_default;
- mac->ledctl_mode2 = mac->ledctl_default;
-
- for (i = 0; i < 4; i++) {
- temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
- shift = (i * 5);
- switch (temp) {
- case ID_LED_ON1_DEF2:
- case ID_LED_ON1_ON2:
- case ID_LED_ON1_OFF2:
- mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
- mac->ledctl_mode1 |= (ledctl_on << shift);
- break;
- case ID_LED_OFF1_DEF2:
- case ID_LED_OFF1_ON2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
- mac->ledctl_mode1 |= (ledctl_off << shift);
- break;
- default:
- /* Do nothing */
- break;
- }
- switch (temp) {
- case ID_LED_DEF1_ON2:
- case ID_LED_ON1_ON2:
- case ID_LED_OFF1_ON2:
- mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
- mac->ledctl_mode2 |= (ledctl_on << shift);
- break;
- case ID_LED_DEF1_OFF2:
- case ID_LED_ON1_OFF2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
- mac->ledctl_mode2 |= (ledctl_off << shift);
- break;
- default:
- /* Do nothing */
- break;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_get_bus_info_ich8lan - Get/Set the bus type and width
- * @hw: pointer to the HW structure
- *
- * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
- * register, so the the bus width is hard coded.
- **/
-static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_bus_info *bus = &hw->bus;
- s32 ret_val;
-
- ret_val = e1000e_get_bus_info_pcie(hw);
-
- /*
- * ICH devices are "PCI Express"-ish. They have
- * a configuration space, but do not contain
- * PCI Express Capability registers, so bus width
- * must be hardcoded.
- */
- if (bus->width == e1000_bus_width_unknown)
- bus->width = e1000_bus_width_pcie_x1;
-
- return ret_val;
-}
-
-/**
- * e1000_reset_hw_ich8lan - Reset the hardware
- * @hw: pointer to the HW structure
- *
- * Does a full reset of the hardware which includes a reset of the PHY and
- * MAC.
- **/
-static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u16 reg;
- u32 ctrl, kab;
- s32 ret_val;
-
- /*
- * Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- ret_val = e1000e_disable_pcie_master(hw);
- if (ret_val)
- e_dbg("PCI-E Master disable polling has failed.\n");
-
- e_dbg("Masking off all interrupts\n");
- ew32(IMC, 0xffffffff);
-
- /*
- * Disable the Transmit and Receive units. Then delay to allow
- * any pending transactions to complete before we hit the MAC
- * with the global reset.
- */
- ew32(RCTL, 0);
- ew32(TCTL, E1000_TCTL_PSP);
- e1e_flush();
-
- usleep_range(10000, 20000);
-
- /* Workaround for ICH8 bit corruption issue in FIFO memory */
- if (hw->mac.type == e1000_ich8lan) {
- /* Set Tx and Rx buffer allocation to 8k apiece. */
- ew32(PBA, E1000_PBA_8K);
- /* Set Packet Buffer Size to 16k. */
- ew32(PBS, E1000_PBS_16K);
- }
-
- if (hw->mac.type == e1000_pchlan) {
- /* Save the NVM K1 bit setting*/
- ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®);
- if (ret_val)
- return ret_val;
-
- if (reg & E1000_NVM_K1_ENABLE)
- dev_spec->nvm_k1_enabled = true;
- else
- dev_spec->nvm_k1_enabled = false;
- }
-
- ctrl = er32(CTRL);
-
- if (!e1000_check_reset_block(hw)) {
- /*
- * Full-chip reset requires MAC and PHY reset at the same
- * time to make sure the interface between MAC and the
- * external PHY is reset.
- */
- ctrl |= E1000_CTRL_PHY_RST;
-
- /*
- * Gate automatic PHY configuration by hardware on
- * non-managed 82579
- */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
- e1000_gate_hw_phy_config_ich8lan(hw, true);
- }
- ret_val = e1000_acquire_swflag_ich8lan(hw);
- e_dbg("Issuing a global reset to ich8lan\n");
- ew32(CTRL, (ctrl | E1000_CTRL_RST));
- /* cannot issue a flush here because it hangs the hardware */
- msleep(20);
-
- if (!ret_val)
- mutex_unlock(&swflag_mutex);
-
- if (ctrl & E1000_CTRL_PHY_RST) {
- ret_val = hw->phy.ops.get_cfg_done(hw);
- if (ret_val)
- goto out;
-
- ret_val = e1000_post_phy_reset_ich8lan(hw);
- if (ret_val)
- goto out;
- }
-
- /*
- * For PCH, this write will make sure that any noise
- * will be detected as a CRC error and be dropped rather than show up
- * as a bad packet to the DMA engine.
- */
- if (hw->mac.type == e1000_pchlan)
- ew32(CRC_OFFSET, 0x65656565);
-
- ew32(IMC, 0xffffffff);
- er32(ICR);
-
- kab = er32(KABGTXD);
- kab |= E1000_KABGTXD_BGSQLBIAS;
- ew32(KABGTXD, kab);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_init_hw_ich8lan - Initialize the hardware
- * @hw: pointer to the HW structure
- *
- * Prepares the hardware for transmit and receive by doing the following:
- * - initialize hardware bits
- * - initialize LED identification
- * - setup receive address registers
- * - setup flow control
- * - setup transmit descriptors
- * - clear statistics
- **/
-static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 ctrl_ext, txdctl, snoop;
- s32 ret_val;
- u16 i;
-
- e1000_initialize_hw_bits_ich8lan(hw);
-
- /* Initialize identification LED */
- ret_val = mac->ops.id_led_init(hw);
- if (ret_val)
- e_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
-
- /* Setup the receive address. */
- e1000e_init_rx_addrs(hw, mac->rar_entry_count);
-
- /* Zero out the Multicast HASH table */
- e_dbg("Zeroing the MTA\n");
- for (i = 0; i < mac->mta_reg_count; i++)
- E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
-
- /*
- * The 82578 Rx buffer will stall if wakeup is enabled in host and
- * the ME. Disable wakeup by clearing the host wakeup bit.
- * Reset the phy after disabling host wakeup to reset the Rx buffer.
- */
- if (hw->phy.type == e1000_phy_82578) {
- e1e_rphy(hw, BM_PORT_GEN_CFG, &i);
- i &= ~BM_WUC_HOST_WU_BIT;
- e1e_wphy(hw, BM_PORT_GEN_CFG, i);
- ret_val = e1000_phy_hw_reset_ich8lan(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Setup link and flow control */
- ret_val = e1000_setup_link_ich8lan(hw);
-
- /* Set the transmit descriptor write-back policy for both queues */
- txdctl = er32(TXDCTL(0));
- txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
- txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
- ew32(TXDCTL(0), txdctl);
- txdctl = er32(TXDCTL(1));
- txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
- E1000_TXDCTL_FULL_TX_DESC_WB;
- txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
- E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
- ew32(TXDCTL(1), txdctl);
-
- /*
- * ICH8 has opposite polarity of no_snoop bits.
- * By default, we should use snoop behavior.
- */
- if (mac->type == e1000_ich8lan)
- snoop = PCIE_ICH8_SNOOP_ALL;
- else
- snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
- e1000e_set_pcie_no_snoop(hw, snoop);
-
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
- ew32(CTRL_EXT, ctrl_ext);
-
- /*
- * Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- e1000_clear_hw_cntrs_ich8lan(hw);
-
- return 0;
-}
-/**
- * e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
- * @hw: pointer to the HW structure
- *
- * Sets/Clears required hardware bits necessary for correctly setting up the
- * hardware for transmit and receive.
- **/
-static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
-{
- u32 reg;
-
- /* Extended Device Control */
- reg = er32(CTRL_EXT);
- reg |= (1 << 22);
- /* Enable PHY low-power state when MAC is at D3 w/o WoL */
- if (hw->mac.type >= e1000_pchlan)
- reg |= E1000_CTRL_EXT_PHYPDEN;
- ew32(CTRL_EXT, reg);
-
- /* Transmit Descriptor Control 0 */
- reg = er32(TXDCTL(0));
- reg |= (1 << 22);
- ew32(TXDCTL(0), reg);
-
- /* Transmit Descriptor Control 1 */
- reg = er32(TXDCTL(1));
- reg |= (1 << 22);
- ew32(TXDCTL(1), reg);
-
- /* Transmit Arbitration Control 0 */
- reg = er32(TARC(0));
- if (hw->mac.type == e1000_ich8lan)
- reg |= (1 << 28) | (1 << 29);
- reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
- ew32(TARC(0), reg);
-
- /* Transmit Arbitration Control 1 */
- reg = er32(TARC(1));
- if (er32(TCTL) & E1000_TCTL_MULR)
- reg &= ~(1 << 28);
- else
- reg |= (1 << 28);
- reg |= (1 << 24) | (1 << 26) | (1 << 30);
- ew32(TARC(1), reg);
-
- /* Device Status */
- if (hw->mac.type == e1000_ich8lan) {
- reg = er32(STATUS);
- reg &= ~(1 << 31);
- ew32(STATUS, reg);
- }
-
- /*
- * work-around descriptor data corruption issue during nfs v2 udp
- * traffic, just disable the nfs filtering capability
- */
- reg = er32(RFCTL);
- reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
- ew32(RFCTL, reg);
-}
-
-/**
- * e1000_setup_link_ich8lan - Setup flow control and link settings
- * @hw: pointer to the HW structure
- *
- * Determines which flow control settings to use, then configures flow
- * control. Calls the appropriate media-specific link configuration
- * function. Assuming the adapter has a valid link partner, a valid link
- * should be established. Assumes the hardware has previously been reset
- * and the transmitter and receiver are not enabled.
- **/
-static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- if (e1000_check_reset_block(hw))
- return 0;
-
- /*
- * ICH parts do not have a word in the NVM to determine
- * the default flow control setting, so we explicitly
- * set it to full.
- */
- if (hw->fc.requested_mode == e1000_fc_default) {
- /* Workaround h/w hang when Tx flow control enabled */
- if (hw->mac.type == e1000_pchlan)
- hw->fc.requested_mode = e1000_fc_rx_pause;
- else
- hw->fc.requested_mode = e1000_fc_full;
- }
-
- /*
- * Save off the requested flow control mode for use later. Depending
- * on the link partner's capabilities, we may or may not use this mode.
- */
- hw->fc.current_mode = hw->fc.requested_mode;
-
- e_dbg("After fix-ups FlowControl is now = %x\n",
- hw->fc.current_mode);
-
- /* Continue to configure the copper link. */
- ret_val = e1000_setup_copper_link_ich8lan(hw);
- if (ret_val)
- return ret_val;
-
- ew32(FCTTV, hw->fc.pause_time);
- if ((hw->phy.type == e1000_phy_82578) ||
- (hw->phy.type == e1000_phy_82579) ||
- (hw->phy.type == e1000_phy_82577)) {
- ew32(FCRTV_PCH, hw->fc.refresh_time);
-
- ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
- hw->fc.pause_time);
- if (ret_val)
- return ret_val;
- }
-
- return e1000e_set_fc_watermarks(hw);
-}
-
-/**
- * e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface
- * @hw: pointer to the HW structure
- *
- * Configures the kumeran interface to the PHY to wait the appropriate time
- * when polling the PHY, then call the generic setup_copper_link to finish
- * configuring the copper link.
- **/
-static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
- u16 reg_data;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ew32(CTRL, ctrl);
-
- /*
- * Set the mac to wait the maximum time between each iteration
- * and increase the max iterations when polling the phy;
- * this fixes erroneous timeouts at 10Mbps.
- */
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- ®_data);
- if (ret_val)
- return ret_val;
- reg_data |= 0x3F;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
- reg_data);
- if (ret_val)
- return ret_val;
-
- switch (hw->phy.type) {
- case e1000_phy_igp_3:
- ret_val = e1000e_copper_link_setup_igp(hw);
- if (ret_val)
- return ret_val;
- break;
- case e1000_phy_bm:
- case e1000_phy_82578:
- ret_val = e1000e_copper_link_setup_m88(hw);
- if (ret_val)
- return ret_val;
- break;
- case e1000_phy_82577:
- case e1000_phy_82579:
- ret_val = e1000_copper_link_setup_82577(hw);
- if (ret_val)
- return ret_val;
- break;
- case e1000_phy_ife:
- ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, ®_data);
- if (ret_val)
- return ret_val;
-
- reg_data &= ~IFE_PMC_AUTO_MDIX;
-
- switch (hw->phy.mdix) {
- case 1:
- reg_data &= ~IFE_PMC_FORCE_MDIX;
- break;
- case 2:
- reg_data |= IFE_PMC_FORCE_MDIX;
- break;
- case 0:
- default:
- reg_data |= IFE_PMC_AUTO_MDIX;
- break;
- }
- ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
- if (ret_val)
- return ret_val;
- break;
- default:
- break;
- }
- return e1000e_setup_copper_link(hw);
-}
-
-/**
- * e1000_get_link_up_info_ich8lan - Get current link speed and duplex
- * @hw: pointer to the HW structure
- * @speed: pointer to store current link speed
- * @duplex: pointer to store the current link duplex
- *
- * Calls the generic get_speed_and_duplex to retrieve the current link
- * information and then calls the Kumeran lock loss workaround for links at
- * gigabit speeds.
- **/
-static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
-{
- s32 ret_val;
-
- ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
- if (ret_val)
- return ret_val;
-
- if ((hw->mac.type == e1000_ich8lan) &&
- (hw->phy.type == e1000_phy_igp_3) &&
- (*speed == SPEED_1000)) {
- ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
- }
-
- return ret_val;
-}
-
-/**
- * e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround
- * @hw: pointer to the HW structure
- *
- * Work-around for 82566 Kumeran PCS lock loss:
- * On link status change (i.e. PCI reset, speed change) and link is up and
- * speed is gigabit-
- * 0) if workaround is optionally disabled do nothing
- * 1) wait 1ms for Kumeran link to come up
- * 2) check Kumeran Diagnostic register PCS lock loss bit
- * 3) if not set the link is locked (all is good), otherwise...
- * 4) reset the PHY
- * 5) repeat up to 10 times
- * Note: this is only called for IGP3 copper when speed is 1gb.
- **/
-static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
-{
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
- u32 phy_ctrl;
- s32 ret_val;
- u16 i, data;
- bool link;
-
- if (!dev_spec->kmrn_lock_loss_workaround_enabled)
- return 0;
-
- /*
- * Make sure link is up before proceeding. If not just return.
- * Attempting this while link is negotiating fouled up link
- * stability
- */
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (!link)
- return 0;
-
- for (i = 0; i < 10; i++) {
- /* read once to clear */
- ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
- if (ret_val)
- return ret_val;
- /* and again to get new status */
- ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
- if (ret_val)
- return ret_val;
-
- /* check for PCS lock */
- if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
- return 0;
-
- /* Issue PHY reset */
- e1000_phy_hw_reset(hw);
- mdelay(5);
- }
- /* Disable GigE link negotiation */
- phy_ctrl = er32(PHY_CTRL);
- phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
- E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
- ew32(PHY_CTRL, phy_ctrl);
-
- /*
- * Call gig speed drop workaround on Gig disable before accessing
- * any PHY registers
- */
- e1000e_gig_downshift_workaround_ich8lan(hw);
-
- /* unable to acquire PCS lock */
- return -E1000_ERR_PHY;
-}
-
-/**
- * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
- * @hw: pointer to the HW structure
- * @state: boolean value used to set the current Kumeran workaround state
- *
- * If ICH8, set the current Kumeran workaround state (enabled - true
- * /disabled - false).
- **/
-void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
- bool state)
-{
- struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
-
- if (hw->mac.type != e1000_ich8lan) {
- e_dbg("Workaround applies to ICH8 only.\n");
- return;
- }
-
- dev_spec->kmrn_lock_loss_workaround_enabled = state;
-}
-
-/**
- * e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3
- * @hw: pointer to the HW structure
- *
- * Workaround for 82566 power-down on D3 entry:
- * 1) disable gigabit link
- * 2) write VR power-down enable
- * 3) read it back
- * Continue if successful, else issue LCD reset and repeat
- **/
-void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
-{
- u32 reg;
- u16 data;
- u8 retry = 0;
-
- if (hw->phy.type != e1000_phy_igp_3)
- return;
-
- /* Try the workaround twice (if needed) */
- do {
- /* Disable link */
- reg = er32(PHY_CTRL);
- reg |= (E1000_PHY_CTRL_GBE_DISABLE |
- E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
- ew32(PHY_CTRL, reg);
-
- /*
- * Call gig speed drop workaround on Gig disable before
- * accessing any PHY registers
- */
- if (hw->mac.type == e1000_ich8lan)
- e1000e_gig_downshift_workaround_ich8lan(hw);
-
- /* Write VR power-down enable */
- e1e_rphy(hw, IGP3_VR_CTRL, &data);
- data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
- e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN);
-
- /* Read it back and test */
- e1e_rphy(hw, IGP3_VR_CTRL, &data);
- data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
- if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
- break;
-
- /* Issue PHY reset and repeat at most one more time */
- reg = er32(CTRL);
- ew32(CTRL, reg | E1000_CTRL_PHY_RST);
- retry++;
- } while (retry);
-}
-
-/**
- * e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
- * @hw: pointer to the HW structure
- *
- * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
- * LPLU, Gig disable, MDIC PHY reset):
- * 1) Set Kumeran Near-end loopback
- * 2) Clear Kumeran Near-end loopback
- * Should only be called for ICH8[m] devices with IGP_3 Phy.
- **/
-void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 reg_data;
-
- if ((hw->mac.type != e1000_ich8lan) ||
- (hw->phy.type != e1000_phy_igp_3))
- return;
-
- ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- ®_data);
- if (ret_val)
- return;
- reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- reg_data);
- if (ret_val)
- return;
- reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
- ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
- reg_data);
-}
-
-/**
- * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
- * @hw: pointer to the HW structure
- *
- * During S0 to Sx transition, it is possible the link remains at gig
- * instead of negotiating to a lower speed. Before going to Sx, set
- * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
- * to a lower speed. For PCH and newer parts, the OEM bits PHY register
- * (LED, GbE disable and LPLU configurations) also needs to be written.
- **/
-void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
-{
- u32 phy_ctrl;
- s32 ret_val;
-
- phy_ctrl = er32(PHY_CTRL);
- phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
- ew32(PHY_CTRL, phy_ctrl);
-
- if (hw->mac.type >= e1000_pchlan) {
- e1000_oem_bits_config_ich8lan(hw, false);
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return;
- e1000_write_smbus_addr(hw);
- hw->phy.ops.release(hw);
- }
-}
-
-/**
- * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
- * @hw: pointer to the HW structure
- *
- * During Sx to S0 transitions on non-managed devices or managed devices
- * on which PHY resets are not blocked, if the PHY registers cannot be
- * accessed properly by the s/w toggle the LANPHYPC value to power cycle
- * the PHY.
- **/
-void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
-{
- u32 fwsm;
-
- if (hw->mac.type != e1000_pch2lan)
- return;
-
- fwsm = er32(FWSM);
- if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) {
- u16 phy_id1, phy_id2;
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val) {
- e_dbg("Failed to acquire PHY semaphore in resume\n");
- return;
- }
-
- /* Test access to the PHY registers by reading the ID regs */
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
- if (ret_val)
- goto release;
-
- if (hw->phy.id == ((u32)(phy_id1 << 16) |
- (u32)(phy_id2 & PHY_REVISION_MASK)))
- goto release;
-
- e1000_toggle_lanphypc_value_ich8lan(hw);
-
- hw->phy.ops.release(hw);
- msleep(50);
- e1000_phy_hw_reset(hw);
- msleep(50);
- return;
- }
-
-release:
- hw->phy.ops.release(hw);
-
- return;
-}
-
-/**
- * e1000_cleanup_led_ich8lan - Restore the default LED operation
- * @hw: pointer to the HW structure
- *
- * Return the LED back to the default configuration.
- **/
-static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
-{
- if (hw->phy.type == e1000_phy_ife)
- return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
-
- ew32(LEDCTL, hw->mac.ledctl_default);
- return 0;
-}
-
-/**
- * e1000_led_on_ich8lan - Turn LEDs on
- * @hw: pointer to the HW structure
- *
- * Turn on the LEDs.
- **/
-static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
-{
- if (hw->phy.type == e1000_phy_ife)
- return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
- (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
-
- ew32(LEDCTL, hw->mac.ledctl_mode2);
- return 0;
-}
-
-/**
- * e1000_led_off_ich8lan - Turn LEDs off
- * @hw: pointer to the HW structure
- *
- * Turn off the LEDs.
- **/
-static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
-{
- if (hw->phy.type == e1000_phy_ife)
- return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
- (IFE_PSCL_PROBE_MODE |
- IFE_PSCL_PROBE_LEDS_OFF));
-
- ew32(LEDCTL, hw->mac.ledctl_mode1);
- return 0;
-}
-
-/**
- * e1000_setup_led_pchlan - Configures SW controllable LED
- * @hw: pointer to the HW structure
- *
- * This prepares the SW controllable LED for use.
- **/
-static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
-{
- return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
-}
-
-/**
- * e1000_cleanup_led_pchlan - Restore the default LED operation
- * @hw: pointer to the HW structure
- *
- * Return the LED back to the default configuration.
- **/
-static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
-{
- return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
-}
-
-/**
- * e1000_led_on_pchlan - Turn LEDs on
- * @hw: pointer to the HW structure
- *
- * Turn on the LEDs.
- **/
-static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
-{
- u16 data = (u16)hw->mac.ledctl_mode2;
- u32 i, led;
-
- /*
- * If no link, then turn LED on by setting the invert bit
- * for each LED that's mode is "link_up" in ledctl_mode2.
- */
- if (!(er32(STATUS) & E1000_STATUS_LU)) {
- for (i = 0; i < 3; i++) {
- led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
- if ((led & E1000_PHY_LED0_MODE_MASK) !=
- E1000_LEDCTL_MODE_LINK_UP)
- continue;
- if (led & E1000_PHY_LED0_IVRT)
- data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
- else
- data |= (E1000_PHY_LED0_IVRT << (i * 5));
- }
- }
-
- return e1e_wphy(hw, HV_LED_CONFIG, data);
-}
-
-/**
- * e1000_led_off_pchlan - Turn LEDs off
- * @hw: pointer to the HW structure
- *
- * Turn off the LEDs.
- **/
-static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
-{
- u16 data = (u16)hw->mac.ledctl_mode1;
- u32 i, led;
-
- /*
- * If no link, then turn LED off by clearing the invert bit
- * for each LED that's mode is "link_up" in ledctl_mode1.
- */
- if (!(er32(STATUS) & E1000_STATUS_LU)) {
- for (i = 0; i < 3; i++) {
- led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
- if ((led & E1000_PHY_LED0_MODE_MASK) !=
- E1000_LEDCTL_MODE_LINK_UP)
- continue;
- if (led & E1000_PHY_LED0_IVRT)
- data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
- else
- data |= (E1000_PHY_LED0_IVRT << (i * 5));
- }
- }
-
- return e1e_wphy(hw, HV_LED_CONFIG, data);
-}
-
-/**
- * e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset
- * @hw: pointer to the HW structure
- *
- * Read appropriate register for the config done bit for completion status
- * and configure the PHY through s/w for EEPROM-less parts.
- *
- * NOTE: some silicon which is EEPROM-less will fail trying to read the
- * config done bit, so only an error is logged and continues. If we were
- * to return with error, EEPROM-less silicon would not be able to be reset
- * or change link.
- **/
-static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u32 bank = 0;
- u32 status;
-
- e1000e_get_cfg_done(hw);
-
- /* Wait for indication from h/w that it has completed basic config */
- if (hw->mac.type >= e1000_ich10lan) {
- e1000_lan_init_done_ich8lan(hw);
- } else {
- ret_val = e1000e_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- e_dbg("Auto Read Done did not complete\n");
- ret_val = 0;
- }
- }
-
- /* Clear PHY Reset Asserted bit */
- status = er32(STATUS);
- if (status & E1000_STATUS_PHYRA)
- ew32(STATUS, status & ~E1000_STATUS_PHYRA);
- else
- e_dbg("PHY Reset Asserted not set - needs delay\n");
-
- /* If EEPROM is not marked present, init the IGP 3 PHY manually */
- if (hw->mac.type <= e1000_ich9lan) {
- if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
- (hw->phy.type == e1000_phy_igp_3)) {
- e1000e_phy_init_script_igp3(hw);
- }
- } else {
- if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
- /* Maybe we should do a basic PHY config */
- e_dbg("EEPROM not present\n");
- ret_val = -E1000_ERR_CONFIG;
- }
- }
-
- return ret_val;
-}
-
-/**
- * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, remove the link.
- **/
-static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
-{
- /* If the management interface is not enabled, then power down */
- if (!(hw->mac.ops.check_mng_mode(hw) ||
- hw->phy.ops.check_reset_block(hw)))
- e1000_power_down_phy_copper(hw);
-}
-
-/**
- * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
- * @hw: pointer to the HW structure
- *
- * Clears hardware counters specific to the silicon family and calls
- * clear_hw_cntrs_generic to clear all general purpose counters.
- **/
-static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
-{
- u16 phy_data;
- s32 ret_val;
-
- e1000e_clear_hw_cntrs_base(hw);
-
- er32(ALGNERRC);
- er32(RXERRC);
- er32(TNCRS);
- er32(CEXTERR);
- er32(TSCTC);
- er32(TSCTFC);
-
- er32(MGTPRC);
- er32(MGTPDC);
- er32(MGTPTC);
-
- er32(IAC);
- er32(ICRXOC);
-
- /* Clear PHY statistics registers */
- if ((hw->phy.type == e1000_phy_82578) ||
- (hw->phy.type == e1000_phy_82579) ||
- (hw->phy.type == e1000_phy_82577)) {
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return;
- ret_val = hw->phy.ops.set_page(hw,
- HV_STATS_PAGE << IGP_PAGE_SHIFT);
- if (ret_val)
- goto release;
- hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
- hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
-release:
- hw->phy.ops.release(hw);
- }
-}
-
-static struct e1000_mac_operations ich8_mac_ops = {
- .id_led_init = e1000e_id_led_init,
- /* check_mng_mode dependent on mac type */
- .check_for_link = e1000_check_for_copper_link_ich8lan,
- /* cleanup_led dependent on mac type */
- .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
- .get_bus_info = e1000_get_bus_info_ich8lan,
- .set_lan_id = e1000_set_lan_id_single_port,
- .get_link_up_info = e1000_get_link_up_info_ich8lan,
- /* led_on dependent on mac type */
- /* led_off dependent on mac type */
- .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
- .reset_hw = e1000_reset_hw_ich8lan,
- .init_hw = e1000_init_hw_ich8lan,
- .setup_link = e1000_setup_link_ich8lan,
- .setup_physical_interface= e1000_setup_copper_link_ich8lan,
- /* id_led_init dependent on mac type */
-};
-
-static struct e1000_phy_operations ich8_phy_ops = {
- .acquire = e1000_acquire_swflag_ich8lan,
- .check_reset_block = e1000_check_reset_block_ich8lan,
- .commit = NULL,
- .get_cfg_done = e1000_get_cfg_done_ich8lan,
- .get_cable_length = e1000e_get_cable_length_igp_2,
- .read_reg = e1000e_read_phy_reg_igp,
- .release = e1000_release_swflag_ich8lan,
- .reset = e1000_phy_hw_reset_ich8lan,
- .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan,
- .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan,
- .write_reg = e1000e_write_phy_reg_igp,
-};
-
-static struct e1000_nvm_operations ich8_nvm_ops = {
- .acquire = e1000_acquire_nvm_ich8lan,
- .read = e1000_read_nvm_ich8lan,
- .release = e1000_release_nvm_ich8lan,
- .update = e1000_update_nvm_checksum_ich8lan,
- .valid_led_default = e1000_valid_led_default_ich8lan,
- .validate = e1000_validate_nvm_checksum_ich8lan,
- .write = e1000_write_nvm_ich8lan,
-};
-
-struct e1000_info e1000_ich8_info = {
- .mac = e1000_ich8lan,
- .flags = FLAG_HAS_WOL
- | FLAG_IS_ICH
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 8,
- .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_ich9_info = {
- .mac = e1000_ich9lan,
- .flags = FLAG_HAS_JUMBO_FRAMES
- | FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_ERT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 10,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_ich10_info = {
- .mac = e1000_ich10lan,
- .flags = FLAG_HAS_JUMBO_FRAMES
- | FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_ERT
- | FLAG_HAS_FLASH
- | FLAG_APME_IN_WUC,
- .pba = 10,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_pch_info = {
- .mac = e1000_pchlan,
- .flags = FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
- | FLAG_APME_IN_WUC,
- .flags2 = FLAG2_HAS_PHY_STATS,
- .pba = 26,
- .max_hw_frame_size = 4096,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
-
-struct e1000_info e1000_pch2_info = {
- .mac = e1000_pch2lan,
- .flags = FLAG_IS_ICH
- | FLAG_HAS_WOL
- | FLAG_RX_CSUM_ENABLED
- | FLAG_HAS_CTRLEXT_ON_LOAD
- | FLAG_HAS_AMT
- | FLAG_HAS_FLASH
- | FLAG_HAS_JUMBO_FRAMES
- | FLAG_APME_IN_WUC,
- .flags2 = FLAG2_HAS_PHY_STATS
- | FLAG2_HAS_EEE,
- .pba = 26,
- .max_hw_frame_size = DEFAULT_JUMBO,
- .get_variants = e1000_get_variants_ich8lan,
- .mac_ops = &ich8_mac_ops,
- .phy_ops = &ich8_phy_ops,
- .nvm_ops = &ich8_nvm_ops,
-};
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000.h"
-
-enum e1000_mng_mode {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG 0x20000000
-
-/* Intel(R) Active Management Technology signature */
-#define E1000_IAMT_SIGNATURE 0x544D4149
-
-/**
- * e1000e_get_bus_info_pcie - Get PCIe bus information
- * @hw: pointer to the HW structure
- *
- * Determines and stores the system bus information for a particular
- * network interface. The following bus information is determined and stored:
- * bus speed, bus width, type (PCIe), and PCIe function.
- **/
-s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_bus_info *bus = &hw->bus;
- struct e1000_adapter *adapter = hw->adapter;
- u16 pcie_link_status, cap_offset;
-
- cap_offset = adapter->pdev->pcie_cap;
- if (!cap_offset) {
- bus->width = e1000_bus_width_unknown;
- } else {
- pci_read_config_word(adapter->pdev,
- cap_offset + PCIE_LINK_STATUS,
- &pcie_link_status);
- bus->width = (enum e1000_bus_width)((pcie_link_status &
- PCIE_LINK_WIDTH_MASK) >>
- PCIE_LINK_WIDTH_SHIFT);
- }
-
- mac->ops.set_lan_id(hw);
-
- return 0;
-}
-
-/**
- * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
- *
- * @hw: pointer to the HW structure
- *
- * Determines the LAN function id by reading memory-mapped registers
- * and swaps the port value if requested.
- **/
-void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
-{
- struct e1000_bus_info *bus = &hw->bus;
- u32 reg;
-
- /*
- * The status register reports the correct function number
- * for the device regardless of function swap state.
- */
- reg = er32(STATUS);
- bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
-}
-
-/**
- * e1000_set_lan_id_single_port - Set LAN id for a single port device
- * @hw: pointer to the HW structure
- *
- * Sets the LAN function id to zero for a single port device.
- **/
-void e1000_set_lan_id_single_port(struct e1000_hw *hw)
-{
- struct e1000_bus_info *bus = &hw->bus;
-
- bus->func = 0;
-}
-
-/**
- * e1000_clear_vfta_generic - Clear VLAN filter table
- * @hw: pointer to the HW structure
- *
- * Clears the register array which contains the VLAN filter table by
- * setting all the values to 0.
- **/
-void e1000_clear_vfta_generic(struct e1000_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
- e1e_flush();
- }
-}
-
-/**
- * e1000_write_vfta_generic - Write value to VLAN filter table
- * @hw: pointer to the HW structure
- * @offset: register offset in VLAN filter table
- * @value: register value written to VLAN filter table
- *
- * Writes value at the given offset in the register array which stores
- * the VLAN filter table.
- **/
-void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
-{
- E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
- e1e_flush();
-}
-
-/**
- * e1000e_init_rx_addrs - Initialize receive address's
- * @hw: pointer to the HW structure
- * @rar_count: receive address registers
- *
- * Setup the receive address registers by setting the base receive address
- * register to the devices MAC address and clearing all the other receive
- * address registers to 0.
- **/
-void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
- u32 i;
- u8 mac_addr[ETH_ALEN] = {0};
-
- /* Setup the receive address */
- e_dbg("Programming MAC Address into RAR[0]\n");
-
- e1000e_rar_set(hw, hw->mac.addr, 0);
-
- /* Zero out the other (rar_entry_count - 1) receive addresses */
- e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
- for (i = 1; i < rar_count; i++)
- e1000e_rar_set(hw, mac_addr, i);
-}
-
-/**
- * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
- * @hw: pointer to the HW structure
- *
- * Checks the nvm for an alternate MAC address. An alternate MAC address
- * can be setup by pre-boot software and must be treated like a permanent
- * address and must override the actual permanent MAC address. If an
- * alternate MAC address is found it is programmed into RAR0, replacing
- * the permanent address that was installed into RAR0 by the Si on reset.
- * This function will return SUCCESS unless it encounters an error while
- * reading the EEPROM.
- **/
-s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
-{
- u32 i;
- s32 ret_val = 0;
- u16 offset, nvm_alt_mac_addr_offset, nvm_data;
- u8 alt_mac_addr[ETH_ALEN];
-
- ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
- if (ret_val)
- goto out;
-
- /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
- if (!((nvm_data & NVM_COMPAT_LOM) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
- (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
- goto out;
-
- ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (nvm_alt_mac_addr_offset == 0xFFFF) {
- /* There is no Alternate MAC Address */
- goto out;
- }
-
- if (hw->bus.func == E1000_FUNC_1)
- nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
- for (i = 0; i < ETH_ALEN; i += 2) {
- offset = nvm_alt_mac_addr_offset + (i >> 1);
- ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
- alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
- }
-
- /* if multicast bit is set, the alternate address will not be used */
- if (is_multicast_ether_addr(alt_mac_addr)) {
- e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
- goto out;
- }
-
- /*
- * We have a valid alternate MAC address, and we want to treat it the
- * same as the normal permanent MAC address stored by the HW into the
- * RAR. Do this by mapping this address into RAR0.
- */
- e1000e_rar_set(hw, alt_mac_addr, 0);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_rar_set - Set receive address register
- * @hw: pointer to the HW structure
- * @addr: pointer to the receive address
- * @index: receive address array register
- *
- * Sets the receive address array register at index to the address passed
- * in by addr.
- **/
-void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
-{
- u32 rar_low, rar_high;
-
- /*
- * HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] |
- ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
-
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
- /* If MAC address zero, no need to set the AV bit */
- if (rar_low || rar_high)
- rar_high |= E1000_RAH_AV;
-
- /*
- * Some bridges will combine consecutive 32-bit writes into
- * a single burst write, which will malfunction on some parts.
- * The flushes avoid this.
- */
- ew32(RAL(index), rar_low);
- e1e_flush();
- ew32(RAH(index), rar_high);
- e1e_flush();
-}
-
-/**
- * e1000_hash_mc_addr - Generate a multicast hash value
- * @hw: pointer to the HW structure
- * @mc_addr: pointer to a multicast address
- *
- * Generates a multicast address hash value which is used to determine
- * the multicast filter table array address and new table value. See
- * e1000_mta_set_generic()
- **/
-static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
-{
- u32 hash_value, hash_mask;
- u8 bit_shift = 0;
-
- /* Register count multiplied by bits per register */
- hash_mask = (hw->mac.mta_reg_count * 32) - 1;
-
- /*
- * For a mc_filter_type of 0, bit_shift is the number of left-shifts
- * where 0xFF would still fall within the hash mask.
- */
- while (hash_mask >> bit_shift != 0xFF)
- bit_shift++;
-
- /*
- * The portion of the address that is used for the hash table
- * is determined by the mc_filter_type setting.
- * The algorithm is such that there is a total of 8 bits of shifting.
- * The bit_shift for a mc_filter_type of 0 represents the number of
- * left-shifts where the MSB of mc_addr[5] would still fall within
- * the hash_mask. Case 0 does this exactly. Since there are a total
- * of 8 bits of shifting, then mc_addr[4] will shift right the
- * remaining number of bits. Thus 8 - bit_shift. The rest of the
- * cases are a variation of this algorithm...essentially raising the
- * number of bits to shift mc_addr[5] left, while still keeping the
- * 8-bit shifting total.
- *
- * For example, given the following Destination MAC Address and an
- * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
- * we can see that the bit_shift for case 0 is 4. These are the hash
- * values resulting from each mc_filter_type...
- * [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB
- *
- * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
- * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
- * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
- * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
- */
- switch (hw->mac.mc_filter_type) {
- default:
- case 0:
- break;
- case 1:
- bit_shift += 1;
- break;
- case 2:
- bit_shift += 2;
- break;
- case 3:
- bit_shift += 4;
- break;
- }
-
- hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
- (((u16) mc_addr[5]) << bit_shift)));
-
- return hash_value;
-}
-
-/**
- * e1000e_update_mc_addr_list_generic - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates entire Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count)
-{
- u32 hash_value, hash_bit, hash_reg;
- int i;
-
- /* clear mta_shadow */
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
- hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
-
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
- mc_addr_list += (ETH_ALEN);
- }
-
- /* replace the entire MTA table */
- for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
- E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
- e1e_flush();
-}
-
-/**
- * e1000e_clear_hw_cntrs_base - Clear base hardware counters
- * @hw: pointer to the HW structure
- *
- * Clears the base hardware counters by reading the counter registers.
- **/
-void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
-{
- er32(CRCERRS);
- er32(SYMERRS);
- er32(MPC);
- er32(SCC);
- er32(ECOL);
- er32(MCC);
- er32(LATECOL);
- er32(COLC);
- er32(DC);
- er32(SEC);
- er32(RLEC);
- er32(XONRXC);
- er32(XONTXC);
- er32(XOFFRXC);
- er32(XOFFTXC);
- er32(FCRUC);
- er32(GPRC);
- er32(BPRC);
- er32(MPRC);
- er32(GPTC);
- er32(GORCL);
- er32(GORCH);
- er32(GOTCL);
- er32(GOTCH);
- er32(RNBC);
- er32(RUC);
- er32(RFC);
- er32(ROC);
- er32(RJC);
- er32(TORL);
- er32(TORH);
- er32(TOTL);
- er32(TOTH);
- er32(TPR);
- er32(TPT);
- er32(MPTC);
- er32(BPTC);
-}
-
-/**
- * e1000e_check_for_copper_link - Check for link (Copper)
- * @hw: pointer to the HW structure
- *
- * Checks to see of the link status of the hardware has changed. If a
- * change in link status has been detected, then we read the PHY registers
- * to get the current speed/duplex if link exists.
- **/
-s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- bool link;
-
- /*
- * We only want to go out to the PHY registers to see if Auto-Neg
- * has completed and/or if our link status has changed. The
- * get_link_status flag is set upon receiving a Link Status
- * Change or Rx Sequence Error interrupt.
- */
- if (!mac->get_link_status)
- return 0;
-
- /*
- * First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
- * of the PHY.
- */
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- return ret_val;
-
- if (!link)
- return ret_val; /* No link detected */
-
- mac->get_link_status = false;
-
- /*
- * Check if there was DownShift, must be checked
- * immediately after link-up
- */
- e1000e_check_downshift(hw);
-
- /*
- * If we are forcing speed/duplex, then we simply return since
- * we have already determined whether we have link or not.
- */
- if (!mac->autoneg) {
- ret_val = -E1000_ERR_CONFIG;
- return ret_val;
- }
-
- /*
- * Auto-Neg is enabled. Auto Speed Detection takes care
- * of MAC speed/duplex configuration. So we only need to
- * configure Collision Distance in the MAC.
- */
- e1000e_config_collision_dist(hw);
-
- /*
- * Configure Flow Control now that Auto-Neg has completed.
- * First, we need to restore the desired flow control
- * settings because we may have had to re-autoneg with a
- * different link partner.
- */
- ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val)
- e_dbg("Error configuring flow control\n");
-
- return ret_val;
-}
-
-/**
- * e1000e_check_for_fiber_link - Check for link (Fiber)
- * @hw: pointer to the HW structure
- *
- * Checks for link up on the hardware. If link is not up and we have
- * a signal, then we need to force link up.
- **/
-s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 rxcw;
- u32 ctrl;
- u32 status;
- s32 ret_val;
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
- rxcw = er32(RXCW);
-
- /*
- * If we don't have link (auto-negotiation failed or link partner
- * cannot auto-negotiate), the cable is plugged in (we have signal),
- * and our link partner is not trying to auto-negotiate with us (we
- * are receiving idles or data), we need to force link up. We also
- * need to give auto-negotiation time to complete, in case the cable
- * was just plugged in. The autoneg_failed flag does this.
- */
- /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
- if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) &&
- (!(rxcw & E1000_RXCW_C))) {
- if (mac->autoneg_failed == 0) {
- mac->autoneg_failed = 1;
- return 0;
- }
- e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
- /* Disable auto-negotiation in the TXCW register */
- ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
- /* Force link-up and also force full-duplex. */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* Configure Flow Control after forcing link up. */
- ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error configuring flow control\n");
- return ret_val;
- }
- } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- /*
- * If we are forcing link and we are receiving /C/ ordered
- * sets, re-enable auto-negotiation in the TXCW register
- * and disable forced link in the Device Control register
- * in an attempt to auto-negotiate with our link partner.
- */
- e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
- ew32(TXCW, mac->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
- mac->serdes_has_link = true;
- }
-
- return 0;
-}
-
-/**
- * e1000e_check_for_serdes_link - Check for link (Serdes)
- * @hw: pointer to the HW structure
- *
- * Checks for link up on the hardware. If link is not up and we have
- * a signal, then we need to force link up.
- **/
-s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 rxcw;
- u32 ctrl;
- u32 status;
- s32 ret_val;
-
- ctrl = er32(CTRL);
- status = er32(STATUS);
- rxcw = er32(RXCW);
-
- /*
- * If we don't have link (auto-negotiation failed or link partner
- * cannot auto-negotiate), and our link partner is not trying to
- * auto-negotiate with us (we are receiving idles or data),
- * we need to force link up. We also need to give auto-negotiation
- * time to complete.
- */
- /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
- if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
- if (mac->autoneg_failed == 0) {
- mac->autoneg_failed = 1;
- return 0;
- }
- e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
-
- /* Disable auto-negotiation in the TXCW register */
- ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
-
- /* Force link-up and also force full-duplex. */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
- ew32(CTRL, ctrl);
-
- /* Configure Flow Control after forcing link up. */
- ret_val = e1000e_config_fc_after_link_up(hw);
- if (ret_val) {
- e_dbg("Error configuring flow control\n");
- return ret_val;
- }
- } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
- /*
- * If we are forcing link and we are receiving /C/ ordered
- * sets, re-enable auto-negotiation in the TXCW register
- * and disable forced link in the Device Control register
- * in an attempt to auto-negotiate with our link partner.
- */
- e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
- ew32(TXCW, mac->txcw);
- ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
-
- mac->serdes_has_link = true;
- } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
- /*
- * If we force link for non-auto-negotiation switch, check
- * link status based on MAC synchronization for internal
- * serdes media type.
- */
- /* SYNCH bit and IV bit are sticky. */
- udelay(10);
- rxcw = er32(RXCW);
- if (rxcw & E1000_RXCW_SYNCH) {
- if (!(rxcw & E1000_RXCW_IV)) {
- mac->serdes_has_link = true;
- e_dbg("SERDES: Link up - forced.\n");
- }
- } else {
- mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - force failed.\n");
- }
- }
-
- if (E1000_TXCW_ANE & er32(TXCW)) {
- status = er32(STATUS);
- if (status & E1000_STATUS_LU) {
- /* SYNCH bit and IV bit are sticky, so reread rxcw. */
- udelay(10);
- rxcw = er32(RXCW);
- if (rxcw & E1000_RXCW_SYNCH) {
- if (!(rxcw & E1000_RXCW_IV)) {
- mac->serdes_has_link = true;
- e_dbg("SERDES: Link up - autoneg "
- "completed successfully.\n");
- } else {
- mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - invalid"
- "codewords detected in autoneg.\n");
- }
- } else {
- mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - no sync.\n");
- }
- } else {
- mac->serdes_has_link = false;
- e_dbg("SERDES: Link down - autoneg failed\n");
- }
- }
-
- return 0;
-}
-
-/**
- * e1000_set_default_fc_generic - Set flow control default values
- * @hw: pointer to the HW structure
- *
- * Read the EEPROM for the default values for flow control and store the
- * values.
- **/
-static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 nvm_data;
-
- /*
- * Read and store word 0x0F of the EEPROM. This word contains bits
- * that determine the hardware's default PAUSE (flow control) mode,
- * a bit that determines whether the HW defaults to enabling or
- * disabling auto-negotiation, and the direction of the
- * SW defined pins. If there is no SW over-ride of the flow
- * control setting, then the variable hw->fc will
- * be initialized based on a value in the EEPROM.
- */
- ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
-
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
-
- if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
- hw->fc.requested_mode = e1000_fc_none;
- else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
- NVM_WORD0F_ASM_DIR)
- hw->fc.requested_mode = e1000_fc_tx_pause;
- else
- hw->fc.requested_mode = e1000_fc_full;
-
- return 0;
-}
-
-/**
- * e1000e_setup_link - Setup flow control and link settings
- * @hw: pointer to the HW structure
- *
- * Determines which flow control settings to use, then configures flow
- * control. Calls the appropriate media-specific link configuration
- * function. Assuming the adapter has a valid link partner, a valid link
- * should be established. Assumes the hardware has previously been reset
- * and the transmitter and receiver are not enabled.
- **/
-s32 e1000e_setup_link(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
-
- /*
- * In the case of the phy reset being blocked, we already have a link.
- * We do not need to set it up again.
- */
- if (e1000_check_reset_block(hw))
- return 0;
-
- /*
- * If requested flow control is set to default, set flow control
- * based on the EEPROM flow control settings.
- */
- if (hw->fc.requested_mode == e1000_fc_default) {
- ret_val = e1000_set_default_fc_generic(hw);
- if (ret_val)
- return ret_val;
- }
-
- /*
- * Save off the requested flow control mode for use later. Depending
- * on the link partner's capabilities, we may or may not use this mode.
- */
- hw->fc.current_mode = hw->fc.requested_mode;
-
- e_dbg("After fix-ups FlowControl is now = %x\n",
- hw->fc.current_mode);
-
- /* Call the necessary media_type subroutine to configure the link. */
- ret_val = mac->ops.setup_physical_interface(hw);
- if (ret_val)
- return ret_val;
-
- /*
- * Initialize the flow control address, type, and PAUSE timer
- * registers to their default values. This is done even if flow
- * control is disabled, because it does not hurt anything to
- * initialize these registers.
- */
- e_dbg("Initializing the Flow Control address, type and timer regs\n");
- ew32(FCT, FLOW_CONTROL_TYPE);
- ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
- ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
-
- ew32(FCTTV, hw->fc.pause_time);
-
- return e1000e_set_fc_watermarks(hw);
-}
-
-/**
- * e1000_commit_fc_settings_generic - Configure flow control
- * @hw: pointer to the HW structure
- *
- * Write the flow control settings to the Transmit Config Word Register (TXCW)
- * base on the flow control settings in e1000_mac_info.
- **/
-static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 txcw;
-
- /*
- * Check for a software override of the flow control settings, and
- * setup the device accordingly. If auto-negotiation is enabled, then
- * software will have to set the "PAUSE" bits to the correct value in
- * the Transmit Config Word Register (TXCW) and re-start auto-
- * negotiation. However, if auto-negotiation is disabled, then
- * software will have to manually configure the two flow control enable
- * bits in the CTRL register.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but we
- * do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
- */
- switch (hw->fc.current_mode) {
- case e1000_fc_none:
- /* Flow control completely disabled by a software over-ride. */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
- break;
- case e1000_fc_rx_pause:
- /*
- * Rx Flow control is enabled and Tx Flow control is disabled
- * by a software over-ride. Since there really isn't a way to
- * advertise that we are capable of Rx Pause ONLY, we will
- * advertise that we support both symmetric and asymmetric Rx
- * PAUSE. Later, we will disable the adapter's ability to send
- * PAUSE frames.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- case e1000_fc_tx_pause:
- /*
- * Tx Flow control is enabled, and Rx Flow control is disabled,
- * by a software over-ride.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
- break;
- case e1000_fc_full:
- /*
- * Flow control (both Rx and Tx) is enabled by a software
- * over-ride.
- */
- txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- break;
- }
-
- ew32(TXCW, txcw);
- mac->txcw = txcw;
-
- return 0;
-}
-
-/**
- * e1000_poll_fiber_serdes_link_generic - Poll for link up
- * @hw: pointer to the HW structure
- *
- * Polls for link up by reading the status register, if link fails to come
- * up with auto-negotiation, then the link is forced if a signal is detected.
- **/
-static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 i, status;
- s32 ret_val;
-
- /*
- * If we have a signal (the cable is plugged in, or assumed true for
- * serdes media) then poll for a "Link-Up" indication in the Device
- * Status Register. Time-out if a link isn't seen in 500 milliseconds
- * seconds (Auto-negotiation should complete in less than 500
- * milliseconds even if the other end is doing it in SW).
- */
- for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
- usleep_range(10000, 20000);
- status = er32(STATUS);
- if (status & E1000_STATUS_LU)
- break;
- }
- if (i == FIBER_LINK_UP_LIMIT) {
- e_dbg("Never got a valid link from auto-neg!!!\n");
- mac->autoneg_failed = 1;
- /*
- * AutoNeg failed to achieve a link, so we'll call
- * mac->check_for_link. This routine will force the
- * link up if we detect a signal. This will allow us to
- * communicate with non-autonegotiating link partners.
- */
- ret_val = mac->ops.check_for_link(hw);
- if (ret_val) {
- e_dbg("Error while checking for link\n");
- return ret_val;
- }
- mac->autoneg_failed = 0;
- } else {
- mac->autoneg_failed = 0;
- e_dbg("Valid Link Found\n");
- }
-
- return 0;
-}
-
-/**
- * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
- * @hw: pointer to the HW structure
- *
- * Configures collision distance and flow control for fiber and serdes
- * links. Upon successful setup, poll for link.
- **/
-s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
-
- ctrl = er32(CTRL);
-
- /* Take the link out of reset */
- ctrl &= ~E1000_CTRL_LRST;
-
- e1000e_config_collision_dist(hw);
-
- ret_val = e1000_commit_fc_settings_generic(hw);
- if (ret_val)
- return ret_val;
-
- /*
- * Since auto-negotiation is enabled, take the link out of reset (the
- * link will be in reset, because we previously reset the chip). This
- * will restart auto-negotiation. If auto-negotiation is successful
- * then the link-up status bit will be set and the flow control enable
- * bits (RFCE and TFCE) will be set according to their negotiated value.
- */
- e_dbg("Auto-negotiation enabled\n");
-
- ew32(CTRL, ctrl);
- e1e_flush();
- usleep_range(1000, 2000);
-
- /*
- * For these adapters, the SW definable pin 1 is set when the optics
- * detect a signal. If we have a signal, then poll for a "Link-Up"
- * indication.
- */
- if (hw->phy.media_type == e1000_media_type_internal_serdes ||
- (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
- ret_val = e1000_poll_fiber_serdes_link_generic(hw);
- } else {
- e_dbg("No signal detected\n");
- }
-
- return 0;
-}
-
-/**
- * e1000e_config_collision_dist - Configure collision distance
- * @hw: pointer to the HW structure
- *
- * Configures the collision distance to the default value and is used
- * during link setup. Currently no func pointer exists and all
- * implementations are handled in the generic version of this function.
- **/
-void e1000e_config_collision_dist(struct e1000_hw *hw)
-{
- u32 tctl;
-
- tctl = er32(TCTL);
-
- tctl &= ~E1000_TCTL_COLD;
- tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
-
- ew32(TCTL, tctl);
- e1e_flush();
-}
-
-/**
- * e1000e_set_fc_watermarks - Set flow control high/low watermarks
- * @hw: pointer to the HW structure
- *
- * Sets the flow control high/low threshold (watermark) registers. If
- * flow control XON frame transmission is enabled, then set XON frame
- * transmission as well.
- **/
-s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
-{
- u32 fcrtl = 0, fcrth = 0;
-
- /*
- * Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames is not enabled, then these
- * registers will be set to 0.
- */
- if (hw->fc.current_mode & e1000_fc_tx_pause) {
- /*
- * We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of
- * XON frames.
- */
- fcrtl = hw->fc.low_water;
- fcrtl |= E1000_FCRTL_XONE;
- fcrth = hw->fc.high_water;
- }
- ew32(FCRTL, fcrtl);
- ew32(FCRTH, fcrth);
-
- return 0;
-}
-
-/**
- * e1000e_force_mac_fc - Force the MAC's flow control settings
- * @hw: pointer to the HW structure
- *
- * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
- * device control register to reflect the adapter settings. TFCE and RFCE
- * need to be explicitly set by software when a copper PHY is used because
- * autonegotiation is managed by the PHY rather than the MAC. Software must
- * also configure these bits when link is forced on a fiber connection.
- **/
-s32 e1000e_force_mac_fc(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- ctrl = er32(CTRL);
-
- /*
- * Because we didn't get link via the internal auto-negotiation
- * mechanism (we either forced link or we got link via PHY
- * auto-neg), we have to manually enable/disable transmit an
- * receive flow control.
- *
- * The "Case" statement below enables/disable flow control
- * according to the "hw->fc.current_mode" parameter.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause
- * frames but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
- * 3: Both Rx and Tx flow control (symmetric) is enabled.
- * other: No other values should be possible at this point.
- */
- e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
-
- switch (hw->fc.current_mode) {
- case e1000_fc_none:
- ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
- break;
- case e1000_fc_rx_pause:
- ctrl &= (~E1000_CTRL_TFCE);
- ctrl |= E1000_CTRL_RFCE;
- break;
- case e1000_fc_tx_pause:
- ctrl &= (~E1000_CTRL_RFCE);
- ctrl |= E1000_CTRL_TFCE;
- break;
- case e1000_fc_full:
- ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- return -E1000_ERR_CONFIG;
- }
-
- ew32(CTRL, ctrl);
-
- return 0;
-}
-
-/**
- * e1000e_config_fc_after_link_up - Configures flow control after link
- * @hw: pointer to the HW structure
- *
- * Checks the status of auto-negotiation after link up to ensure that the
- * speed and duplex were not forced. If the link needed to be forced, then
- * flow control needs to be forced also. If auto-negotiation is enabled
- * and did not fail, then we configure flow control based on our link
- * partner.
- **/
-s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val = 0;
- u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
- u16 speed, duplex;
-
- /*
- * Check for the case where we have fiber media and auto-neg failed
- * so we had to force link. In this case, we need to force the
- * configuration of the MAC to match the "fc" parameter.
- */
- if (mac->autoneg_failed) {
- if (hw->phy.media_type == e1000_media_type_fiber ||
- hw->phy.media_type == e1000_media_type_internal_serdes)
- ret_val = e1000e_force_mac_fc(hw);
- } else {
- if (hw->phy.media_type == e1000_media_type_copper)
- ret_val = e1000e_force_mac_fc(hw);
- }
-
- if (ret_val) {
- e_dbg("Error forcing flow control settings\n");
- return ret_val;
- }
-
- /*
- * Check for the case where we have copper media and auto-neg is
- * enabled. In this case, we need to check and see if Auto-Neg
- * has completed, and if so, how the PHY and link partner has
- * flow control configured.
- */
- if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
- /*
- * Read the MII Status Register and check to see if AutoNeg
- * has completed. We read this twice because this reg has
- * some "sticky" (latched) bits.
- */
- ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
- ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
- if (ret_val)
- return ret_val;
-
- if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
- e_dbg("Copper PHY and Auto Neg "
- "has not completed.\n");
- return ret_val;
- }
-
- /*
- * The AutoNeg process has completed, so we now need to
- * read both the Auto Negotiation Advertisement
- * Register (Address 4) and the Auto_Negotiation Base
- * Page Ability Register (Address 5) to determine how
- * flow control was negotiated.
- */
- ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
- if (ret_val)
- return ret_val;
- ret_val =
- e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
- if (ret_val)
- return ret_val;
-
- /*
- * Two bits in the Auto Negotiation Advertisement Register
- * (Address 4) and two bits in the Auto Negotiation Base
- * Page Ability Register (Address 5) determine flow control
- * for both the PHY and the link partner. The following
- * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
- * 1999, describes these PAUSE resolution bits and how flow
- * control is determined based upon these settings.
- * NOTE: DC = Don't Care
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
- *-------|---------|-------|---------|--------------------
- * 0 | 0 | DC | DC | e1000_fc_none
- * 0 | 1 | 0 | DC | e1000_fc_none
- * 0 | 1 | 1 | 0 | e1000_fc_none
- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
- * 1 | 0 | 0 | DC | e1000_fc_none
- * 1 | DC | 1 | DC | e1000_fc_full
- * 1 | 1 | 0 | 0 | e1000_fc_none
- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
- *
- * Are both PAUSE bits set to 1? If so, this implies
- * Symmetric Flow Control is enabled at both ends. The
- * ASM_DIR bits are irrelevant per the spec.
- *
- * For Symmetric Flow Control:
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | DC | 1 | DC | E1000_fc_full
- *
- */
- if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
- /*
- * Now we need to check if the user selected Rx ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise Rx
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
- */
- if (hw->fc.requested_mode == e1000_fc_full) {
- hw->fc.current_mode = e1000_fc_full;
- e_dbg("Flow Control = FULL.\r\n");
- } else {
- hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = "
- "Rx PAUSE frames only.\r\n");
- }
- }
- /*
- * For receiving PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
- */
- else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.current_mode = e1000_fc_tx_pause;
- e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
- }
- /*
- * For transmitting PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
- */
- else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.current_mode = e1000_fc_rx_pause;
- e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
- } else {
- /*
- * Per the IEEE spec, at this point flow control
- * should be disabled.
- */
- hw->fc.current_mode = e1000_fc_none;
- e_dbg("Flow Control = NONE.\r\n");
- }
-
- /*
- * Now we need to do one last check... If we auto-
- * negotiated to HALF DUPLEX, flow control should not be
- * enabled per IEEE 802.3 spec.
- */
- ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
- if (ret_val) {
- e_dbg("Error getting link speed and duplex\n");
- return ret_val;
- }
-
- if (duplex == HALF_DUPLEX)
- hw->fc.current_mode = e1000_fc_none;
-
- /*
- * Now we call a subroutine to actually force the MAC
- * controller to use the correct flow control settings.
- */
- ret_val = e1000e_force_mac_fc(hw);
- if (ret_val) {
- e_dbg("Error forcing flow control settings\n");
- return ret_val;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
- * @hw: pointer to the HW structure
- * @speed: stores the current speed
- * @duplex: stores the current duplex
- *
- * Read the status register for the current speed/duplex and store the current
- * speed and duplex for copper connections.
- **/
-s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
- u32 status;
-
- status = er32(STATUS);
- if (status & E1000_STATUS_SPEED_1000)
- *speed = SPEED_1000;
- else if (status & E1000_STATUS_SPEED_100)
- *speed = SPEED_100;
- else
- *speed = SPEED_10;
-
- if (status & E1000_STATUS_FD)
- *duplex = FULL_DUPLEX;
- else
- *duplex = HALF_DUPLEX;
-
- e_dbg("%u Mbps, %s Duplex\n",
- *speed == SPEED_1000 ? 1000 : *speed == SPEED_100 ? 100 : 10,
- *duplex == FULL_DUPLEX ? "Full" : "Half");
-
- return 0;
-}
-
-/**
- * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
- * @hw: pointer to the HW structure
- * @speed: stores the current speed
- * @duplex: stores the current duplex
- *
- * Sets the speed and duplex to gigabit full duplex (the only possible option)
- * for fiber/serdes links.
- **/
-s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
-{
- *speed = SPEED_1000;
- *duplex = FULL_DUPLEX;
-
- return 0;
-}
-
-/**
- * e1000e_get_hw_semaphore - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore to access the PHY or NVM
- **/
-s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
-{
- u32 swsm;
- s32 timeout = hw->nvm.word_size + 1;
- s32 i = 0;
-
- /* Get the SW semaphore */
- while (i < timeout) {
- swsm = er32(SWSM);
- if (!(swsm & E1000_SWSM_SMBI))
- break;
-
- udelay(50);
- i++;
- }
-
- if (i == timeout) {
- e_dbg("Driver can't access device - SMBI bit is set.\n");
- return -E1000_ERR_NVM;
- }
-
- /* Get the FW semaphore. */
- for (i = 0; i < timeout; i++) {
- swsm = er32(SWSM);
- ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
-
- /* Semaphore acquired if bit latched */
- if (er32(SWSM) & E1000_SWSM_SWESMBI)
- break;
-
- udelay(50);
- }
-
- if (i == timeout) {
- /* Release semaphores */
- e1000e_put_hw_semaphore(hw);
- e_dbg("Driver can't access the NVM\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000e_put_hw_semaphore - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used to access the PHY or NVM
- **/
-void e1000e_put_hw_semaphore(struct e1000_hw *hw)
-{
- u32 swsm;
-
- swsm = er32(SWSM);
- swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
- ew32(SWSM, swsm);
-}
-
-/**
- * e1000e_get_auto_rd_done - Check for auto read completion
- * @hw: pointer to the HW structure
- *
- * Check EEPROM for Auto Read done bit.
- **/
-s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
-{
- s32 i = 0;
-
- while (i < AUTO_READ_DONE_TIMEOUT) {
- if (er32(EECD) & E1000_EECD_AUTO_RD)
- break;
- usleep_range(1000, 2000);
- i++;
- }
-
- if (i == AUTO_READ_DONE_TIMEOUT) {
- e_dbg("Auto read by HW from NVM has not completed.\n");
- return -E1000_ERR_RESET;
- }
-
- return 0;
-}
-
-/**
- * e1000e_valid_led_default - Verify a valid default LED config
- * @hw: pointer to the HW structure
- * @data: pointer to the NVM (EEPROM)
- *
- * Read the EEPROM for the current default LED configuration. If the
- * LED configuration is not valid, set to a valid LED configuration.
- **/
-s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
-{
- s32 ret_val;
-
- ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
-
- if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
- *data = ID_LED_DEFAULT;
-
- return 0;
-}
-
-/**
- * e1000e_id_led_init -
- * @hw: pointer to the HW structure
- *
- **/
-s32 e1000e_id_led_init(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- const u32 ledctl_mask = 0x000000FF;
- const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- u16 data, i, temp;
- const u16 led_mask = 0x0F;
-
- ret_val = hw->nvm.ops.valid_led_default(hw, &data);
- if (ret_val)
- return ret_val;
-
- mac->ledctl_default = er32(LEDCTL);
- mac->ledctl_mode1 = mac->ledctl_default;
- mac->ledctl_mode2 = mac->ledctl_default;
-
- for (i = 0; i < 4; i++) {
- temp = (data >> (i << 2)) & led_mask;
- switch (temp) {
- case ID_LED_ON1_DEF2:
- case ID_LED_ON1_ON2:
- case ID_LED_ON1_OFF2:
- mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode1 |= ledctl_on << (i << 3);
- break;
- case ID_LED_OFF1_DEF2:
- case ID_LED_OFF1_ON2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode1 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- switch (temp) {
- case ID_LED_DEF1_ON2:
- case ID_LED_ON1_ON2:
- case ID_LED_OFF1_ON2:
- mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode2 |= ledctl_on << (i << 3);
- break;
- case ID_LED_DEF1_OFF2:
- case ID_LED_ON1_OFF2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode2 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000e_setup_led_generic - Configures SW controllable LED
- * @hw: pointer to the HW structure
- *
- * This prepares the SW controllable LED for use and saves the current state
- * of the LED so it can be later restored.
- **/
-s32 e1000e_setup_led_generic(struct e1000_hw *hw)
-{
- u32 ledctl;
-
- if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
- return -E1000_ERR_CONFIG;
-
- if (hw->phy.media_type == e1000_media_type_fiber) {
- ledctl = er32(LEDCTL);
- hw->mac.ledctl_default = ledctl;
- /* Turn off LED0 */
- ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
- E1000_LEDCTL_LED0_BLINK |
- E1000_LEDCTL_LED0_MODE_MASK);
- ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
- E1000_LEDCTL_LED0_MODE_SHIFT);
- ew32(LEDCTL, ledctl);
- } else if (hw->phy.media_type == e1000_media_type_copper) {
- ew32(LEDCTL, hw->mac.ledctl_mode1);
- }
-
- return 0;
-}
-
-/**
- * e1000e_cleanup_led_generic - Set LED config to default operation
- * @hw: pointer to the HW structure
- *
- * Remove the current LED configuration and set the LED configuration
- * to the default value, saved from the EEPROM.
- **/
-s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
-{
- ew32(LEDCTL, hw->mac.ledctl_default);
- return 0;
-}
-
-/**
- * e1000e_blink_led_generic - Blink LED
- * @hw: pointer to the HW structure
- *
- * Blink the LEDs which are set to be on.
- **/
-s32 e1000e_blink_led_generic(struct e1000_hw *hw)
-{
- u32 ledctl_blink = 0;
- u32 i;
-
- if (hw->phy.media_type == e1000_media_type_fiber) {
- /* always blink LED0 for PCI-E fiber */
- ledctl_blink = E1000_LEDCTL_LED0_BLINK |
- (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
- } else {
- /*
- * set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2
- */
- ledctl_blink = hw->mac.ledctl_mode2;
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
- (i * 8));
- }
-
- ew32(LEDCTL, ledctl_blink);
-
- return 0;
-}
-
-/**
- * e1000e_led_on_generic - Turn LED on
- * @hw: pointer to the HW structure
- *
- * Turn LED on.
- **/
-s32 e1000e_led_on_generic(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- switch (hw->phy.media_type) {
- case e1000_media_type_fiber:
- ctrl = er32(CTRL);
- ctrl &= ~E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- ew32(CTRL, ctrl);
- break;
- case e1000_media_type_copper:
- ew32(LEDCTL, hw->mac.ledctl_mode2);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000e_led_off_generic - Turn LED off
- * @hw: pointer to the HW structure
- *
- * Turn LED off.
- **/
-s32 e1000e_led_off_generic(struct e1000_hw *hw)
-{
- u32 ctrl;
-
- switch (hw->phy.media_type) {
- case e1000_media_type_fiber:
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_SWDPIN0;
- ctrl |= E1000_CTRL_SWDPIO0;
- ew32(CTRL, ctrl);
- break;
- case e1000_media_type_copper:
- ew32(LEDCTL, hw->mac.ledctl_mode1);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/**
- * e1000e_set_pcie_no_snoop - Set PCI-express capabilities
- * @hw: pointer to the HW structure
- * @no_snoop: bitmap of snoop events
- *
- * Set the PCI-express register to snoop for events enabled in 'no_snoop'.
- **/
-void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
-{
- u32 gcr;
-
- if (no_snoop) {
- gcr = er32(GCR);
- gcr &= ~(PCIE_NO_SNOOP_ALL);
- gcr |= no_snoop;
- ew32(GCR, gcr);
- }
-}
-
-/**
- * e1000e_disable_pcie_master - Disables PCI-express master access
- * @hw: pointer to the HW structure
- *
- * Returns 0 if successful, else returns -10
- * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
- * the master requests to be disabled.
- *
- * Disables PCI-Express master access and verifies there are no pending
- * requests.
- **/
-s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 timeout = MASTER_DISABLE_TIMEOUT;
-
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
- ew32(CTRL, ctrl);
-
- while (timeout) {
- if (!(er32(STATUS) &
- E1000_STATUS_GIO_MASTER_ENABLE))
- break;
- udelay(100);
- timeout--;
- }
-
- if (!timeout) {
- e_dbg("Master requests are pending.\n");
- return -E1000_ERR_MASTER_REQUESTS_PENDING;
- }
-
- return 0;
-}
-
-/**
- * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
- * @hw: pointer to the HW structure
- *
- * Reset the Adaptive Interframe Spacing throttle to default values.
- **/
-void e1000e_reset_adaptive(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
-
- if (!mac->adaptive_ifs) {
- e_dbg("Not in Adaptive IFS mode!\n");
- goto out;
- }
-
- mac->current_ifs_val = 0;
- mac->ifs_min_val = IFS_MIN;
- mac->ifs_max_val = IFS_MAX;
- mac->ifs_step_size = IFS_STEP;
- mac->ifs_ratio = IFS_RATIO;
-
- mac->in_ifs_mode = false;
- ew32(AIT, 0);
-out:
- return;
-}
-
-/**
- * e1000e_update_adaptive - Update Adaptive Interframe Spacing
- * @hw: pointer to the HW structure
- *
- * Update the Adaptive Interframe Spacing Throttle value based on the
- * time between transmitted packets and time between collisions.
- **/
-void e1000e_update_adaptive(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
-
- if (!mac->adaptive_ifs) {
- e_dbg("Not in Adaptive IFS mode!\n");
- goto out;
- }
-
- if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
- if (mac->tx_packet_delta > MIN_NUM_XMITS) {
- mac->in_ifs_mode = true;
- if (mac->current_ifs_val < mac->ifs_max_val) {
- if (!mac->current_ifs_val)
- mac->current_ifs_val = mac->ifs_min_val;
- else
- mac->current_ifs_val +=
- mac->ifs_step_size;
- ew32(AIT, mac->current_ifs_val);
- }
- }
- } else {
- if (mac->in_ifs_mode &&
- (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
- mac->current_ifs_val = 0;
- mac->in_ifs_mode = false;
- ew32(AIT, 0);
- }
- }
-out:
- return;
-}
-
-/**
- * e1000_raise_eec_clk - Raise EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Enable/Raise the EEPROM clock bit.
- **/
-static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd | E1000_EECD_SK;
- ew32(EECD, *eecd);
- e1e_flush();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * e1000_lower_eec_clk - Lower EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Clear/Lower the EEPROM clock bit.
- **/
-static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd & ~E1000_EECD_SK;
- ew32(EECD, *eecd);
- e1e_flush();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
- * @hw: pointer to the HW structure
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
- *
- * We need to shift 'count' bits out to the EEPROM. So, the value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- **/
-static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u32 mask;
-
- mask = 0x01 << (count - 1);
- if (nvm->type == e1000_nvm_eeprom_spi)
- eecd |= E1000_EECD_DO;
-
- do {
- eecd &= ~E1000_EECD_DI;
-
- if (data & mask)
- eecd |= E1000_EECD_DI;
-
- ew32(EECD, eecd);
- e1e_flush();
-
- udelay(nvm->delay_usec);
-
- e1000_raise_eec_clk(hw, &eecd);
- e1000_lower_eec_clk(hw, &eecd);
-
- mask >>= 1;
- } while (mask);
-
- eecd &= ~E1000_EECD_DI;
- ew32(EECD, eecd);
-}
-
-/**
- * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
- * @hw: pointer to the HW structure
- * @count: number of bits to shift in
- *
- * In order to read a register from the EEPROM, we need to shift 'count' bits
- * in from the EEPROM. Bits are "shifted in" by raising the clock input to
- * the EEPROM (setting the SK bit), and then reading the value of the data out
- * "DO" bit. During this "shifting in" process the data in "DI" bit should
- * always be clear.
- **/
-static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
-{
- u32 eecd;
- u32 i;
- u16 data;
-
- eecd = er32(EECD);
-
- eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
- data = 0;
-
- for (i = 0; i < count; i++) {
- data <<= 1;
- e1000_raise_eec_clk(hw, &eecd);
-
- eecd = er32(EECD);
-
- eecd &= ~E1000_EECD_DI;
- if (eecd & E1000_EECD_DO)
- data |= 1;
-
- e1000_lower_eec_clk(hw, &eecd);
- }
-
- return data;
-}
-
-/**
- * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
- * @hw: pointer to the HW structure
- * @ee_reg: EEPROM flag for polling
- *
- * Polls the EEPROM status bit for either read or write completion based
- * upon the value of 'ee_reg'.
- **/
-s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
-{
- u32 attempts = 100000;
- u32 i, reg = 0;
-
- for (i = 0; i < attempts; i++) {
- if (ee_reg == E1000_NVM_POLL_READ)
- reg = er32(EERD);
- else
- reg = er32(EEWR);
-
- if (reg & E1000_NVM_RW_REG_DONE)
- return 0;
-
- udelay(5);
- }
-
- return -E1000_ERR_NVM;
-}
-
-/**
- * e1000e_acquire_nvm - Generic request for access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Set the EEPROM access request bit and wait for EEPROM access grant bit.
- * Return successful if access grant bit set, else clear the request for
- * EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-s32 e1000e_acquire_nvm(struct e1000_hw *hw)
-{
- u32 eecd = er32(EECD);
- s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
-
- ew32(EECD, eecd | E1000_EECD_REQ);
- eecd = er32(EECD);
-
- while (timeout) {
- if (eecd & E1000_EECD_GNT)
- break;
- udelay(5);
- eecd = er32(EECD);
- timeout--;
- }
-
- if (!timeout) {
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
- e_dbg("Could not acquire NVM grant\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000_standby_nvm - Return EEPROM to standby state
- * @hw: pointer to the HW structure
- *
- * Return the EEPROM to a standby state.
- **/
-static void e1000_standby_nvm(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- /* Toggle CS to flush commands */
- eecd |= E1000_EECD_CS;
- ew32(EECD, eecd);
- e1e_flush();
- udelay(nvm->delay_usec);
- eecd &= ~E1000_EECD_CS;
- ew32(EECD, eecd);
- e1e_flush();
- udelay(nvm->delay_usec);
- }
-}
-
-/**
- * e1000_stop_nvm - Terminate EEPROM command
- * @hw: pointer to the HW structure
- *
- * Terminates the current command by inverting the EEPROM's chip select pin.
- **/
-static void e1000_stop_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- eecd = er32(EECD);
- if (hw->nvm.type == e1000_nvm_eeprom_spi) {
- /* Pull CS high */
- eecd |= E1000_EECD_CS;
- e1000_lower_eec_clk(hw, &eecd);
- }
-}
-
-/**
- * e1000e_release_nvm - Release exclusive access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-void e1000e_release_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- e1000_stop_nvm(hw);
-
- eecd = er32(EECD);
- eecd &= ~E1000_EECD_REQ;
- ew32(EECD, eecd);
-}
-
-/**
- * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
- * @hw: pointer to the HW structure
- *
- * Setups the EEPROM for reading and writing.
- **/
-static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = er32(EECD);
- u8 spi_stat_reg;
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- u16 timeout = NVM_MAX_RETRY_SPI;
-
- /* Clear SK and CS */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- ew32(EECD, eecd);
- e1e_flush();
- udelay(1);
-
- /*
- * Read "Status Register" repeatedly until the LSB is cleared.
- * The EEPROM will signal that the command has been completed
- * by clearing bit 0 of the internal status register. If it's
- * not cleared within 'timeout', then error out.
- */
- while (timeout) {
- e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
- hw->nvm.opcode_bits);
- spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
- if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- e1000_standby_nvm(hw);
- timeout--;
- }
-
- if (!timeout) {
- e_dbg("SPI NVM Status error\n");
- return -E1000_ERR_NVM;
- }
- }
-
- return 0;
-}
-
-/**
- * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
- * @hw: pointer to the HW structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i, eerd = 0;
- s32 ret_val = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * too many words for the offset, and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- for (i = 0; i < words; i++) {
- eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
- E1000_NVM_RW_REG_START;
-
- ew32(EERD, eerd);
- ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
- if (ret_val)
- break;
-
- data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_write_nvm_spi - Write to EEPROM using SPI
- * @hw: pointer to the HW structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * Writes data to EEPROM at offset using SPI interface.
- *
- * If e1000e_update_nvm_checksum is not called after this function , the
- * EEPROM will most likely contain an invalid checksum.
- **/
-s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- s32 ret_val;
- u16 widx = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- e_dbg("nvm parameter(s) out of bounds\n");
- return -E1000_ERR_NVM;
- }
-
- ret_val = nvm->ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- while (widx < words) {
- u8 write_opcode = NVM_WRITE_OPCODE_SPI;
-
- ret_val = e1000_ready_nvm_eeprom(hw);
- if (ret_val) {
- nvm->ops.release(hw);
- return ret_val;
- }
-
- e1000_standby_nvm(hw);
-
- /* Send the WRITE ENABLE command (8 bit opcode) */
- e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
- nvm->opcode_bits);
-
- e1000_standby_nvm(hw);
-
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((nvm->address_bits == 8) && (offset >= 128))
- write_opcode |= NVM_A8_OPCODE_SPI;
-
- /* Send the Write command (8-bit opcode + addr) */
- e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
- e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
- nvm->address_bits);
-
- /* Loop to allow for up to whole page write of eeprom */
- while (widx < words) {
- u16 word_out = data[widx];
- word_out = (word_out >> 8) | (word_out << 8);
- e1000_shift_out_eec_bits(hw, word_out, 16);
- widx++;
-
- if ((((offset + widx) * 2) % nvm->page_size) == 0) {
- e1000_standby_nvm(hw);
- break;
- }
- }
- }
-
- usleep_range(10000, 20000);
- nvm->ops.release(hw);
- return 0;
-}
-
-/**
- * e1000_read_pba_string_generic - Read device part number
- * @hw: pointer to the HW structure
- * @pba_num: pointer to device part number
- * @pba_num_size: size of part number buffer
- *
- * Reads the product board assembly (PBA) number from the EEPROM and stores
- * the value in pba_num.
- **/
-s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
- u32 pba_num_size)
-{
- s32 ret_val;
- u16 nvm_data;
- u16 pba_ptr;
- u16 offset;
- u16 length;
-
- if (pba_num == NULL) {
- e_dbg("PBA string buffer was null\n");
- ret_val = E1000_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- /*
- * if nvm_data is not ptr guard the PBA must be in legacy format which
- * means pba_ptr is actually our second data word for the PBA number
- * and we can decode it into an ascii string
- */
- if (nvm_data != NVM_PBA_PTR_GUARD) {
- e_dbg("NVM PBA number is not stored as string\n");
-
- /* we will need 11 characters to store the PBA */
- if (pba_num_size < 11) {
- e_dbg("PBA string buffer too small\n");
- return E1000_ERR_NO_SPACE;
- }
-
- /* extract hex string from data and pba_ptr */
- pba_num[0] = (nvm_data >> 12) & 0xF;
- pba_num[1] = (nvm_data >> 8) & 0xF;
- pba_num[2] = (nvm_data >> 4) & 0xF;
- pba_num[3] = nvm_data & 0xF;
- pba_num[4] = (pba_ptr >> 12) & 0xF;
- pba_num[5] = (pba_ptr >> 8) & 0xF;
- pba_num[6] = '-';
- pba_num[7] = 0;
- pba_num[8] = (pba_ptr >> 4) & 0xF;
- pba_num[9] = pba_ptr & 0xF;
-
- /* put a null character on the end of our string */
- pba_num[10] = '\0';
-
- /* switch all the data but the '-' to hex char */
- for (offset = 0; offset < 10; offset++) {
- if (pba_num[offset] < 0xA)
- pba_num[offset] += '0';
- else if (pba_num[offset] < 0x10)
- pba_num[offset] += 'A' - 0xA;
- }
-
- goto out;
- }
-
- ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (length == 0xFFFF || length == 0) {
- e_dbg("NVM PBA number section invalid length\n");
- ret_val = E1000_ERR_NVM_PBA_SECTION;
- goto out;
- }
- /* check if pba_num buffer is big enough */
- if (pba_num_size < (((u32)length * 2) - 1)) {
- e_dbg("PBA string buffer too small\n");
- ret_val = E1000_ERR_NO_SPACE;
- goto out;
- }
-
- /* trim pba length from start of string */
- pba_ptr++;
- length--;
-
- for (offset = 0; offset < length; offset++) {
- ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- goto out;
- }
- pba_num[offset * 2] = (u8)(nvm_data >> 8);
- pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
- }
- pba_num[offset * 2] = '\0';
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_read_mac_addr_generic - Read device MAC address
- * @hw: pointer to the HW structure
- *
- * Reads the device MAC address from the EEPROM and stores the value.
- * Since devices with two ports use the same EEPROM, we increment the
- * last bit in the MAC address for the second port.
- **/
-s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
-{
- u32 rar_high;
- u32 rar_low;
- u16 i;
-
- rar_high = er32(RAH(0));
- rar_low = er32(RAL(0));
-
- for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
-
- for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
-
- for (i = 0; i < ETH_ALEN; i++)
- hw->mac.addr[i] = hw->mac.perm_addr[i];
-
- return 0;
-}
-
-/**
- * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- * and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error\n");
- return ret_val;
- }
- checksum += nvm_data;
- }
-
- if (checksum != (u16) NVM_SUM) {
- e_dbg("NVM Checksum Invalid\n");
- return -E1000_ERR_NVM;
- }
-
- return 0;
-}
-
-/**
- * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM checksum by reading/adding each word of the EEPROM
- * up to the checksum. Then calculates the EEPROM checksum and writes the
- * value to the EEPROM.
- **/
-s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < NVM_CHECKSUM_REG; i++) {
- ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
- if (ret_val) {
- e_dbg("NVM Read Error while updating checksum.\n");
- return ret_val;
- }
- checksum += nvm_data;
- }
- checksum = (u16) NVM_SUM - checksum;
- ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
- if (ret_val)
- e_dbg("NVM Write Error while updating checksum.\n");
-
- return ret_val;
-}
-
-/**
- * e1000e_reload_nvm - Reloads EEPROM
- * @hw: pointer to the HW structure
- *
- * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
- * extended control register.
- **/
-void e1000e_reload_nvm(struct e1000_hw *hw)
-{
- u32 ctrl_ext;
-
- udelay(10);
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_EE_RST;
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
-}
-
-/**
- * e1000_calculate_checksum - Calculate checksum for buffer
- * @buffer: pointer to EEPROM
- * @length: size of EEPROM to calculate a checksum for
- *
- * Calculates the checksum for some buffer on a specified length. The
- * checksum calculated is returned.
- **/
-static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
-{
- u32 i;
- u8 sum = 0;
-
- if (!buffer)
- return 0;
-
- for (i = 0; i < length; i++)
- sum += buffer[i];
-
- return (u8) (0 - sum);
-}
-
-/**
- * e1000_mng_enable_host_if - Checks host interface is enabled
- * @hw: pointer to the HW structure
- *
- * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
- *
- * This function checks whether the HOST IF is enabled for command operation
- * and also checks whether the previous command is completed. It busy waits
- * in case of previous command is not completed.
- **/
-static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
-{
- u32 hicr;
- u8 i;
-
- if (!(hw->mac.arc_subsystem_valid)) {
- e_dbg("ARC subsystem not valid.\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
-
- /* Check that the host interface is enabled. */
- hicr = er32(HICR);
- if ((hicr & E1000_HICR_EN) == 0) {
- e_dbg("E1000_HOST_EN bit disabled.\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
- /* check the previous command is completed */
- for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
- hicr = er32(HICR);
- if (!(hicr & E1000_HICR_C))
- break;
- mdelay(1);
- }
-
- if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
- e_dbg("Previous command timeout failed .\n");
- return -E1000_ERR_HOST_INTERFACE_COMMAND;
- }
-
- return 0;
-}
-
-/**
- * e1000e_check_mng_mode_generic - check management mode
- * @hw: pointer to the HW structure
- *
- * Reads the firmware semaphore register and returns true (>0) if
- * manageability is enabled, else false (0).
- **/
-bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
-{
- u32 fwsm = er32(FWSM);
-
- return (fwsm & E1000_FWSM_MODE_MASK) ==
- (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
-}
-
-/**
- * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
- * @hw: pointer to the HW structure
- *
- * Enables packet filtering on transmit packets if manageability is enabled
- * and host interface is enabled.
- **/
-bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
-{
- struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
- u32 *buffer = (u32 *)&hw->mng_cookie;
- u32 offset;
- s32 ret_val, hdr_csum, csum;
- u8 i, len;
-
- hw->mac.tx_pkt_filtering = true;
-
- /* No manageability, no filtering */
- if (!e1000e_check_mng_mode(hw)) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
- /*
- * If we can't read from the host interface for whatever
- * reason, disable filtering.
- */
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
- /* Read in the header. Length and offset are in dwords. */
- len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
- offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
- for (i = 0; i < len; i++)
- *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
- hdr_csum = hdr->checksum;
- hdr->checksum = 0;
- csum = e1000_calculate_checksum((u8 *)hdr,
- E1000_MNG_DHCP_COOKIE_LENGTH);
- /*
- * If either the checksums or signature don't match, then
- * the cookie area isn't considered valid, in which case we
- * take the safe route of assuming Tx filtering is enabled.
- */
- if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
- hw->mac.tx_pkt_filtering = true;
- goto out;
- }
-
- /* Cookie area is valid, make the final check for filtering. */
- if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
- hw->mac.tx_pkt_filtering = false;
- goto out;
- }
-
-out:
- return hw->mac.tx_pkt_filtering;
-}
-
-/**
- * e1000_mng_write_cmd_header - Writes manageability command header
- * @hw: pointer to the HW structure
- * @hdr: pointer to the host interface command header
- *
- * Writes the command header after does the checksum calculation.
- **/
-static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
- struct e1000_host_mng_command_header *hdr)
-{
- u16 i, length = sizeof(struct e1000_host_mng_command_header);
-
- /* Write the whole command header structure with new checksum. */
-
- hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
-
- length >>= 2;
- /* Write the relevant command block into the ram area. */
- for (i = 0; i < length; i++) {
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i,
- *((u32 *) hdr + i));
- e1e_flush();
- }
-
- return 0;
-}
-
-/**
- * e1000_mng_host_if_write - Write to the manageability host interface
- * @hw: pointer to the HW structure
- * @buffer: pointer to the host interface buffer
- * @length: size of the buffer
- * @offset: location in the buffer to write to
- * @sum: sum of the data (not checksum)
- *
- * This function writes the buffer content at the offset given on the host if.
- * It also does alignment considerations to do the writes in most efficient
- * way. Also fills up the sum of the buffer in *buffer parameter.
- **/
-static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
- u16 length, u16 offset, u8 *sum)
-{
- u8 *tmp;
- u8 *bufptr = buffer;
- u32 data = 0;
- u16 remaining, i, j, prev_bytes;
-
- /* sum = only sum of the data and it is not checksum */
-
- if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
- return -E1000_ERR_PARAM;
-
- tmp = (u8 *)&data;
- prev_bytes = offset & 0x3;
- offset >>= 2;
-
- if (prev_bytes) {
- data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
- for (j = prev_bytes; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
- length -= j - prev_bytes;
- offset++;
- }
-
- remaining = length & 0x3;
- length -= remaining;
-
- /* Calculate length in DWORDs */
- length >>= 2;
-
- /*
- * The device driver writes the relevant command block into the
- * ram area.
- */
- for (i = 0; i < length; i++) {
- for (j = 0; j < sizeof(u32); j++) {
- *(tmp + j) = *bufptr++;
- *sum += *(tmp + j);
- }
-
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
- }
- if (remaining) {
- for (j = 0; j < sizeof(u32); j++) {
- if (j < remaining)
- *(tmp + j) = *bufptr++;
- else
- *(tmp + j) = 0;
-
- *sum += *(tmp + j);
- }
- E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
- }
-
- return 0;
-}
-
-/**
- * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
- * @hw: pointer to the HW structure
- * @buffer: pointer to the host interface
- * @length: size of the buffer
- *
- * Writes the DHCP information to the host interface.
- **/
-s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
-{
- struct e1000_host_mng_command_header hdr;
- s32 ret_val;
- u32 hicr;
-
- hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
- hdr.command_length = length;
- hdr.reserved1 = 0;
- hdr.reserved2 = 0;
- hdr.checksum = 0;
-
- /* Enable the host interface */
- ret_val = e1000_mng_enable_host_if(hw);
- if (ret_val)
- return ret_val;
-
- /* Populate the host interface with the contents of "buffer". */
- ret_val = e1000_mng_host_if_write(hw, buffer, length,
- sizeof(hdr), &(hdr.checksum));
- if (ret_val)
- return ret_val;
-
- /* Write the manageability command header */
- ret_val = e1000_mng_write_cmd_header(hw, &hdr);
- if (ret_val)
- return ret_val;
-
- /* Tell the ARC a new command is pending. */
- hicr = er32(HICR);
- ew32(HICR, hicr | E1000_HICR_C);
-
- return 0;
-}
-
-/**
- * e1000e_enable_mng_pass_thru - Check if management passthrough is needed
- * @hw: pointer to the HW structure
- *
- * Verifies the hardware needs to leave interface enabled so that frames can
- * be directed to and from the management interface.
- **/
-bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
-{
- u32 manc;
- u32 fwsm, factps;
- bool ret_val = false;
-
- manc = er32(MANC);
-
- if (!(manc & E1000_MANC_RCV_TCO_EN))
- goto out;
-
- if (hw->mac.has_fwsm) {
- fwsm = er32(FWSM);
- factps = er32(FACTPS);
-
- if (!(factps & E1000_FACTPS_MNGCG) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
- ret_val = true;
- goto out;
- }
- } else if ((hw->mac.type == e1000_82574) ||
- (hw->mac.type == e1000_82583)) {
- u16 data;
-
- factps = er32(FACTPS);
- e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
-
- if (!(factps & E1000_FACTPS_MNGCG) &&
- ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
- (e1000_mng_mode_pt << 13))) {
- ret_val = true;
- goto out;
- }
- } else if ((manc & E1000_MANC_SMBUS_EN) &&
- !(manc & E1000_MANC_ASF_EN)) {
- ret_val = true;
- goto out;
- }
-
-out:
- return ret_val;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/interrupt.h>
-#include <linux/tcp.h>
-#include <linux/ipv6.h>
-#include <linux/slab.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-#include <linux/cpu.h>
-#include <linux/smp.h>
-#include <linux/pm_qos_params.h>
-#include <linux/pm_runtime.h>
-#include <linux/aer.h>
-#include <linux/prefetch.h>
-
-#include "e1000.h"
-
-#define DRV_EXTRAVERSION "-k"
-
-#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION
-char e1000e_driver_name[] = "e1000e";
-const char e1000e_driver_version[] = DRV_VERSION;
-
-static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
-
-static const struct e1000_info *e1000_info_tbl[] = {
- [board_82571] = &e1000_82571_info,
- [board_82572] = &e1000_82572_info,
- [board_82573] = &e1000_82573_info,
- [board_82574] = &e1000_82574_info,
- [board_82583] = &e1000_82583_info,
- [board_80003es2lan] = &e1000_es2_info,
- [board_ich8lan] = &e1000_ich8_info,
- [board_ich9lan] = &e1000_ich9_info,
- [board_ich10lan] = &e1000_ich10_info,
- [board_pchlan] = &e1000_pch_info,
- [board_pch2lan] = &e1000_pch2_info,
-};
-
-struct e1000_reg_info {
- u32 ofs;
- char *name;
-};
-
-#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */
-#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */
-#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */
-#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */
-#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */
-
-#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
-#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
-#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
-#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
-#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
-
-static const struct e1000_reg_info e1000_reg_info_tbl[] = {
-
- /* General Registers */
- {E1000_CTRL, "CTRL"},
- {E1000_STATUS, "STATUS"},
- {E1000_CTRL_EXT, "CTRL_EXT"},
-
- /* Interrupt Registers */
- {E1000_ICR, "ICR"},
-
- /* Rx Registers */
- {E1000_RCTL, "RCTL"},
- {E1000_RDLEN, "RDLEN"},
- {E1000_RDH, "RDH"},
- {E1000_RDT, "RDT"},
- {E1000_RDTR, "RDTR"},
- {E1000_RXDCTL(0), "RXDCTL"},
- {E1000_ERT, "ERT"},
- {E1000_RDBAL, "RDBAL"},
- {E1000_RDBAH, "RDBAH"},
- {E1000_RDFH, "RDFH"},
- {E1000_RDFT, "RDFT"},
- {E1000_RDFHS, "RDFHS"},
- {E1000_RDFTS, "RDFTS"},
- {E1000_RDFPC, "RDFPC"},
-
- /* Tx Registers */
- {E1000_TCTL, "TCTL"},
- {E1000_TDBAL, "TDBAL"},
- {E1000_TDBAH, "TDBAH"},
- {E1000_TDLEN, "TDLEN"},
- {E1000_TDH, "TDH"},
- {E1000_TDT, "TDT"},
- {E1000_TIDV, "TIDV"},
- {E1000_TXDCTL(0), "TXDCTL"},
- {E1000_TADV, "TADV"},
- {E1000_TARC(0), "TARC"},
- {E1000_TDFH, "TDFH"},
- {E1000_TDFT, "TDFT"},
- {E1000_TDFHS, "TDFHS"},
- {E1000_TDFTS, "TDFTS"},
- {E1000_TDFPC, "TDFPC"},
-
- /* List Terminator */
- {}
-};
-
-/*
- * e1000_regdump - register printout routine
- */
-static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
-{
- int n = 0;
- char rname[16];
- u32 regs[8];
-
- switch (reginfo->ofs) {
- case E1000_RXDCTL(0):
- for (n = 0; n < 2; n++)
- regs[n] = __er32(hw, E1000_RXDCTL(n));
- break;
- case E1000_TXDCTL(0):
- for (n = 0; n < 2; n++)
- regs[n] = __er32(hw, E1000_TXDCTL(n));
- break;
- case E1000_TARC(0):
- for (n = 0; n < 2; n++)
- regs[n] = __er32(hw, E1000_TARC(n));
- break;
- default:
- printk(KERN_INFO "%-15s %08x\n",
- reginfo->name, __er32(hw, reginfo->ofs));
- return;
- }
-
- snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
- printk(KERN_INFO "%-15s ", rname);
- for (n = 0; n < 2; n++)
- printk(KERN_CONT "%08x ", regs[n]);
- printk(KERN_CONT "\n");
-}
-
-/*
- * e1000e_dump - Print registers, Tx-ring and Rx-ring
- */
-static void e1000e_dump(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_reg_info *reginfo;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_tx_desc *tx_desc;
- struct my_u0 {
- u64 a;
- u64 b;
- } *u0;
- struct e1000_buffer *buffer_info;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- union e1000_rx_desc_packet_split *rx_desc_ps;
- struct e1000_rx_desc *rx_desc;
- struct my_u1 {
- u64 a;
- u64 b;
- u64 c;
- u64 d;
- } *u1;
- u32 staterr;
- int i = 0;
-
- if (!netif_msg_hw(adapter))
- return;
-
- /* Print netdevice Info */
- if (netdev) {
- dev_info(&adapter->pdev->dev, "Net device Info\n");
- printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
- printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name, netdev->state, netdev->trans_start,
- netdev->last_rx);
- }
-
- /* Print Registers */
- dev_info(&adapter->pdev->dev, "Register Dump\n");
- printk(KERN_INFO " Register Name Value\n");
- for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
- reginfo->name; reginfo++) {
- e1000_regdump(hw, reginfo);
- }
-
- /* Print Tx Ring Summary */
- if (!netdev || !netif_running(netdev))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
- buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
- printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
- 0, tx_ring->next_to_use, tx_ring->next_to_clean,
- (unsigned long long)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp);
-
- /* Print Tx Ring */
- if (!netif_msg_tx_done(adapter))
- goto rx_ring_summary;
-
- dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
-
- /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
- *
- * Legacy Transmit Descriptor
- * +--------------------------------------------------------------+
- * 0 | Buffer Address [63:0] (Reserved on Write Back) |
- * +--------------------------------------------------------------+
- * 8 | Special | CSS | Status | CMD | CSO | Length |
- * +--------------------------------------------------------------+
- * 63 48 47 36 35 32 31 24 23 16 15 0
- *
- * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
- * 63 48 47 40 39 32 31 16 15 8 7 0
- * +----------------------------------------------------------------+
- * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
- * +----------------------------------------------------------------+
- * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
- * +----------------------------------------------------------------+
- * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
- *
- * Extended Data Descriptor (DTYP=0x1)
- * +----------------------------------------------------------------+
- * 0 | Buffer Address [63:0] |
- * +----------------------------------------------------------------+
- * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
- * +----------------------------------------------------------------+
- * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
- */
- printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Legacy format\n");
- printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Context format\n");
- printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
- " [bi->dma ] leng ntw timestamp bi->skb "
- "<-- Ext Data format\n");
- for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- u0 = (struct my_u0 *)tx_desc;
- printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
- "%04X %3X %016llX %p",
- (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
- ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
- (unsigned long long)le64_to_cpu(u0->a),
- (unsigned long long)le64_to_cpu(u0->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->length, buffer_info->next_to_watch,
- (unsigned long long)buffer_info->time_stamp,
- buffer_info->skb);
- if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC/U\n");
- else if (i == tx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
- if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
- print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- buffer_info->length, true);
- }
-
- /* Print Rx Ring Summary */
-rx_ring_summary:
- dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC]\n");
- printk(KERN_INFO " %5d %5X %5X\n", 0,
- rx_ring->next_to_use, rx_ring->next_to_clean);
-
- /* Print Rx Ring */
- if (!netif_msg_rx_status(adapter))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
- switch (adapter->rx_ps_pages) {
- case 1:
- case 2:
- case 3:
- /* [Extended] Packet Split Receive Descriptor Format
- *
- * +-----------------------------------------------------+
- * 0 | Buffer Address 0 [63:0] |
- * +-----------------------------------------------------+
- * 8 | Buffer Address 1 [63:0] |
- * +-----------------------------------------------------+
- * 16 | Buffer Address 2 [63:0] |
- * +-----------------------------------------------------+
- * 24 | Buffer Address 3 [63:0] |
- * +-----------------------------------------------------+
- */
- printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
- "[buffer 1 63:0 ] "
- "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
- "[bi->skb] <-- Ext Pkt Split format\n");
- /* [Extended] Receive Descriptor (Write-Back) Format
- *
- * 63 48 47 32 31 13 12 8 7 4 3 0
- * +------------------------------------------------------+
- * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS |
- * | Checksum | Ident | | Queue | | Type |
- * +------------------------------------------------------+
- * 8 | VLAN Tag | Length | Extended Error | Extended Status |
- * +------------------------------------------------------+
- * 63 48 47 32 31 20 19 0
- */
- printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
- "[vl l0 ee es] "
- "[ l3 l2 l1 hs] [reserved ] ---------------- "
- "[bi->skb] <-- Ext Rx Write-Back format\n");
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
- u1 = (struct my_u1 *)rx_desc_ps;
- staterr =
- le32_to_cpu(rx_desc_ps->wb.middle.status_error);
- if (staterr & E1000_RXD_STAT_DD) {
- /* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX %016llX %016llX "
- "---------------- %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- buffer_info->skb);
- } else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %016llX %016llX %p", i,
- (unsigned long long)le64_to_cpu(u1->a),
- (unsigned long long)le64_to_cpu(u1->b),
- (unsigned long long)le64_to_cpu(u1->c),
- (unsigned long long)le64_to_cpu(u1->d),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
-
- if (netif_msg_pktdata(adapter))
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(buffer_info->dma),
- adapter->rx_ps_bsize0, true);
- }
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
- }
- break;
- default:
- case 0:
- /* Legacy Receive Descriptor Format
- *
- * +-----------------------------------------------------+
- * | Buffer Address [63:0] |
- * +-----------------------------------------------------+
- * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
- * +-----------------------------------------------------+
- * 63 48 47 40 39 32 31 16 15 0
- */
- printk(KERN_INFO "Rl[desc] [address 63:0 ] "
- "[vl er S cks ln] [bi->dma ] [bi->skb] "
- "<-- Legacy format\n");
- for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
- u0 = (struct my_u0 *)rx_desc;
- printk(KERN_INFO "Rl[0x%03X] %016llX %016llX "
- "%016llX %p", i,
- (unsigned long long)le64_to_cpu(u0->a),
- (unsigned long long)le64_to_cpu(u0->b),
- (unsigned long long)buffer_info->dma,
- buffer_info->skb);
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
- if (netif_msg_pktdata(adapter))
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS,
- 16, 1,
- phys_to_virt(buffer_info->dma),
- adapter->rx_buffer_len, true);
- }
- }
-
-exit:
- return;
-}
-
-/**
- * e1000_desc_unused - calculate if we have unused descriptors
- **/
-static int e1000_desc_unused(struct e1000_ring *ring)
-{
- if (ring->next_to_clean > ring->next_to_use)
- return ring->next_to_clean - ring->next_to_use - 1;
-
- return ring->count + ring->next_to_clean - ring->next_to_use - 1;
-}
-
-/**
- * e1000_receive_skb - helper function to handle Rx indications
- * @adapter: board private structure
- * @status: descriptor status field as written by hardware
- * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
- * @skb: pointer to sk_buff to be indicated to stack
- **/
-static void e1000_receive_skb(struct e1000_adapter *adapter,
- struct net_device *netdev, struct sk_buff *skb,
- u8 status, __le16 vlan)
-{
- u16 tag = le16_to_cpu(vlan);
- skb->protocol = eth_type_trans(skb, netdev);
-
- if (status & E1000_RXD_STAT_VP)
- __vlan_hwaccel_put_tag(skb, tag);
-
- napi_gro_receive(&adapter->napi, skb);
-}
-
-/**
- * e1000_rx_checksum - Receive Checksum Offload
- * @adapter: board private structure
- * @status_err: receive descriptor status and error fields
- * @csum: receive descriptor csum field
- * @sk_buff: socket buffer with received data
- **/
-static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
- u32 csum, struct sk_buff *skb)
-{
- u16 status = (u16)status_err;
- u8 errors = (u8)(status_err >> 24);
-
- skb_checksum_none_assert(skb);
-
- /* Ignore Checksum bit is set */
- if (status & E1000_RXD_STAT_IXSM)
- return;
- /* TCP/UDP checksum error bit is set */
- if (errors & E1000_RXD_ERR_TCPE) {
- /* let the stack verify checksum errors */
- adapter->hw_csum_err++;
- return;
- }
-
- /* TCP/UDP Checksum has not been calculated */
- if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
- return;
-
- /* It must be a TCP or UDP packet with a valid checksum */
- if (status & E1000_RXD_STAT_TCPCS) {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- /*
- * IP fragment with UDP payload
- * Hardware complements the payload checksum, so we undo it
- * and then put the value in host order for further stack use.
- */
- __sum16 sum = (__force __sum16)htons(csum);
- skb->csum = csum_unfold(~sum);
- skb->ip_summed = CHECKSUM_COMPLETE;
- }
- adapter->hw_csum_good++;
-}
-
-/**
- * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
- * @adapter: address of board private structure
- **/
-static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
- int cleaned_count, gfp_t gfp)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = adapter->rx_buffer_len;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto map_skb;
- }
-
- skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
- if (!skb) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- buffer_info->skb = skb;
-map_skb:
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "Rx DMA map failed\n");
- adapter->rx_dma_failed++;
- break;
- }
-
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
- }
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- rx_ring->next_to_use = i;
-}
-
-/**
- * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
- * @adapter: address of board private structure
- **/
-static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
- int cleaned_count, gfp_t gfp)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- union e1000_rx_desc_packet_split *rx_desc;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_buffer *buffer_info;
- struct e1000_ps_page *ps_page;
- struct sk_buff *skb;
- unsigned int i, j;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
-
- for (j = 0; j < PS_PAGE_BUFFERS; j++) {
- ps_page = &buffer_info->ps_pages[j];
- if (j >= adapter->rx_ps_pages) {
- /* all unused desc entries get hw null ptr */
- rx_desc->read.buffer_addr[j + 1] =
- ~cpu_to_le64(0);
- continue;
- }
- if (!ps_page->page) {
- ps_page->page = alloc_page(gfp);
- if (!ps_page->page) {
- adapter->alloc_rx_buff_failed++;
- goto no_buffers;
- }
- ps_page->dma = dma_map_page(&pdev->dev,
- ps_page->page,
- 0, PAGE_SIZE,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev,
- ps_page->dma)) {
- dev_err(&adapter->pdev->dev,
- "Rx DMA page map failed\n");
- adapter->rx_dma_failed++;
- goto no_buffers;
- }
- }
- /*
- * Refresh the desc even if buffer_addrs
- * didn't change because each write-back
- * erases this info.
- */
- rx_desc->read.buffer_addr[j + 1] =
- cpu_to_le64(ps_page->dma);
- }
-
- skb = __netdev_alloc_skb_ip_align(netdev,
- adapter->rx_ps_bsize0,
- gfp);
-
- if (!skb) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- buffer_info->skb = skb;
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- adapter->rx_ps_bsize0,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
- dev_err(&pdev->dev, "Rx DMA map failed\n");
- adapter->rx_dma_failed++;
- /* cleanup skb */
- dev_kfree_skb_any(skb);
- buffer_info->skb = NULL;
- break;
- }
-
- rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
-
- if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
- writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
-no_buffers:
- rx_ring->next_to_use = i;
-}
-
-/**
- * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
- * @adapter: address of board private structure
- * @cleaned_count: number of buffers to allocate this pass
- **/
-
-static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
- int cleaned_count, gfp_t gfp)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_rx_desc *rx_desc;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = 256 - 16 /* for skb_reserve */;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- while (cleaned_count--) {
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto check_page;
- }
-
- skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- buffer_info->skb = skb;
-check_page:
- /* allocate a new page if necessary */
- if (!buffer_info->page) {
- buffer_info->page = alloc_page(gfp);
- if (unlikely(!buffer_info->page)) {
- adapter->alloc_rx_buff_failed++;
- break;
- }
- }
-
- if (!buffer_info->dma)
- buffer_info->dma = dma_map_page(&pdev->dev,
- buffer_info->page, 0,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
-
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
-
- if (unlikely(++i == rx_ring->count))
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (likely(rx_ring->next_to_use != i)) {
- rx_ring->next_to_use = i;
- if (unlikely(i-- == 0))
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
- }
-}
-
-/**
- * e1000_clean_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = 0;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- prefetch(skb->data - NET_IP_ALIGN);
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = 1;
- cleaned_count++;
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
-
- /*
- * !EOP means multiple descriptors were used to store a single
- * packet, if that's the case we need to toss it. In fact, we
- * need to toss every packet with the EOP bit clear and the
- * next frame that _does_ have the EOP bit set, as it is by
- * definition only a frame fragment
- */
- if (unlikely(!(status & E1000_RXD_STAT_EOP)))
- adapter->flags2 |= FLAG2_IS_DISCARDING;
-
- if (adapter->flags2 & FLAG2_IS_DISCARDING) {
- /* All receives must fit into a single buffer */
- e_dbg("Receive packet consumed multiple buffers\n");
- /* recycle */
- buffer_info->skb = skb;
- if (status & E1000_RXD_STAT_EOP)
- adapter->flags2 &= ~FLAG2_IS_DISCARDING;
- goto next_desc;
- }
-
- if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
- /* recycle */
- buffer_info->skb = skb;
- goto next_desc;
- }
-
- /* adjust length to remove Ethernet CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- length -= 4;
-
- total_rx_bytes += length;
- total_rx_packets++;
-
- /*
- * code added for copybreak, this should improve
- * performance for small packets with large amounts
- * of reassembly being done in the stack
- */
- if (length < copybreak) {
- struct sk_buff *new_skb =
- netdev_alloc_skb_ip_align(netdev, length);
- if (new_skb) {
- skb_copy_to_linear_data_offset(new_skb,
- -NET_IP_ALIGN,
- (skb->data -
- NET_IP_ALIGN),
- (length +
- NET_IP_ALIGN));
- /* save the skb in buffer_info as good */
- buffer_info->skb = skb;
- skb = new_skb;
- }
- /* else just continue with the old one */
- }
- /* end copybreak code */
- skb_put(skb, length);
-
- /* Receive Checksum Offload */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
- GFP_ATOMIC);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = e1000_desc_unused(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
-
- adapter->total_rx_bytes += total_rx_bytes;
- adapter->total_rx_packets += total_rx_packets;
- return cleaned;
-}
-
-static void e1000_put_txbuf(struct e1000_adapter *adapter,
- struct e1000_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
-}
-
-static void e1000_print_hw_hang(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter,
- print_hang_task);
- struct e1000_ring *tx_ring = adapter->tx_ring;
- unsigned int i = tx_ring->next_to_clean;
- unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
- struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
- struct e1000_hw *hw = &adapter->hw;
- u16 phy_status, phy_1000t_status, phy_ext_status;
- u16 pci_status;
-
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- e1e_rphy(hw, PHY_STATUS, &phy_status);
- e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
- e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
-
- pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
-
- /* detected Hardware unit hang */
- e_err("Detected Hardware Unit Hang:\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]:\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n"
- "MAC Status <%x>\n"
- "PHY Status <%x>\n"
- "PHY 1000BASE-T Status <%x>\n"
- "PHY Extended Status <%x>\n"
- "PCI Status <%x>\n",
- readl(adapter->hw.hw_addr + tx_ring->head),
- readl(adapter->hw.hw_addr + tx_ring->tail),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->upper.fields.status,
- er32(STATUS),
- phy_status,
- phy_1000t_status,
- phy_ext_status,
- pci_status);
-}
-
-/**
- * e1000_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_tx_desc *tx_desc, *eop_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i, eop;
- unsigned int count = 0;
- unsigned int total_tx_bytes = 0, total_tx_packets = 0;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC(*tx_ring, eop);
-
- while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- (count < tx_ring->count)) {
- bool cleaned = false;
- rmb(); /* read buffer_info after eop_desc */
- for (; !cleaned; count++) {
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- cleaned = (i == eop);
-
- if (cleaned) {
- total_tx_packets += buffer_info->segs;
- total_tx_bytes += buffer_info->bytecount;
- }
-
- e1000_put_txbuf(adapter, buffer_info);
- tx_desc->upper.data = 0;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- if (i == tx_ring->next_to_use)
- break;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
-#define TX_WAKE_THRESHOLD 32
- if (count && netif_carrier_ok(netdev) &&
- e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
-
- if (netif_queue_stopped(netdev) &&
- !(test_bit(__E1000_DOWN, &adapter->state))) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
- }
-
- if (adapter->detect_tx_hung) {
- /*
- * Detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i
- */
- adapter->detect_tx_hung = 0;
- if (tx_ring->buffer_info[i].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[i].time_stamp
- + (adapter->tx_timeout_factor * HZ)) &&
- !(er32(STATUS) & E1000_STATUS_TXOFF)) {
- schedule_work(&adapter->print_hang_task);
- netif_stop_queue(netdev);
- }
- }
- adapter->total_tx_bytes += total_tx_bytes;
- adapter->total_tx_packets += total_tx_packets;
- return count < tx_ring->count;
-}
-
-/**
- * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct e1000_hw *hw = &adapter->hw;
- union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_buffer *buffer_info, *next_buffer;
- struct e1000_ps_page *ps_page;
- struct sk_buff *skb;
- unsigned int i, j;
- u32 length, staterr;
- int cleaned_count = 0;
- bool cleaned = 0;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (staterr & E1000_RXD_STAT_DD) {
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- skb = buffer_info->skb;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- /* in the packet split case this is header only */
- prefetch(skb->data - NET_IP_ALIGN);
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = 1;
- cleaned_count++;
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- /* see !EOP comment in other Rx routine */
- if (!(staterr & E1000_RXD_STAT_EOP))
- adapter->flags2 |= FLAG2_IS_DISCARDING;
-
- if (adapter->flags2 & FLAG2_IS_DISCARDING) {
- e_dbg("Packet Split buffers didn't pick up the full "
- "packet\n");
- dev_kfree_skb_irq(skb);
- if (staterr & E1000_RXD_STAT_EOP)
- adapter->flags2 &= ~FLAG2_IS_DISCARDING;
- goto next_desc;
- }
-
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- length = le16_to_cpu(rx_desc->wb.middle.length0);
-
- if (!length) {
- e_dbg("Last part of the packet spanning multiple "
- "descriptors\n");
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- /* Good Receive */
- skb_put(skb, length);
-
- {
- /*
- * this looks ugly, but it seems compiler issues make it
- * more efficient than reusing j
- */
- int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
-
- /*
- * page alloc/put takes too long and effects small packet
- * throughput, so unsplit small packets and save the alloc/put
- * only valid in softirq (napi) context to call kmap_*
- */
- if (l1 && (l1 <= copybreak) &&
- ((length + l1) <= adapter->rx_ps_bsize0)) {
- u8 *vaddr;
-
- ps_page = &buffer_info->ps_pages[0];
-
- /*
- * there is no documentation about how to call
- * kmap_atomic, so we can't hold the mapping
- * very long
- */
- dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
- vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb), vaddr, l1);
- kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
- dma_sync_single_for_device(&pdev->dev, ps_page->dma,
- PAGE_SIZE, DMA_FROM_DEVICE);
-
- /* remove the CRC */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- l1 -= 4;
-
- skb_put(skb, l1);
- goto copydone;
- } /* if */
- }
-
- for (j = 0; j < PS_PAGE_BUFFERS; j++) {
- length = le16_to_cpu(rx_desc->wb.upper.length[j]);
- if (!length)
- break;
-
- ps_page = &buffer_info->ps_pages[j];
- dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
- ps_page->dma = 0;
- skb_fill_page_desc(skb, j, ps_page->page, 0, length);
- ps_page->page = NULL;
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
- }
-
- /* strip the ethernet crc, problem is we're using pages now so
- * this whole operation can get a little cpu intensive
- */
- if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
- pskb_trim(skb, skb->len - 4);
-
-copydone:
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- e1000_rx_checksum(adapter, staterr, le16_to_cpu(
- rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
-
- if (rx_desc->wb.upper.header_status &
- cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
- adapter->rx_hdr_split++;
-
- e1000_receive_skb(adapter, netdev, skb,
- staterr, rx_desc->wb.middle.vlan);
-
-next_desc:
- rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
- buffer_info->skb = NULL;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
- GFP_ATOMIC);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
-
- staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = e1000_desc_unused(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
-
- adapter->total_rx_bytes += total_rx_bytes;
- adapter->total_rx_packets += total_rx_packets;
- return cleaned;
-}
-
-/**
- * e1000_consume_page - helper function
- **/
-static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
- u16 length)
-{
- bi->page = NULL;
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
-}
-
-/**
- * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-
-static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_rx_desc *rx_desc, *next_rxd;
- struct e1000_buffer *buffer_info, *next_buffer;
- u32 length;
- unsigned int i;
- int cleaned_count = 0;
- bool cleaned = false;
- unsigned int total_rx_bytes=0, total_rx_packets=0;
-
- i = rx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & E1000_RXD_STAT_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- ++i;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = E1000_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = true;
- cleaned_count++;
- dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
-
- /* errors is only valid for DD + EOP descriptors */
- if (unlikely((status & E1000_RXD_STAT_EOP) &&
- (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
- /* recycle both page and skb */
- buffer_info->skb = skb;
- /* an error means any chain goes out the window
- * too */
- if (rx_ring->rx_skb_top)
- dev_kfree_skb_irq(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- goto next_desc;
- }
-
-#define rxtop (rx_ring->rx_skb_top)
- if (!(status & E1000_RXD_STAT_EOP)) {
- /* this descriptor is only the beginning (or middle) */
- if (!rxtop) {
- /* this is the beginning of a chain */
- rxtop = skb;
- skb_fill_page_desc(rxtop, 0, buffer_info->page,
- 0, length);
- } else {
- /* this is the middle of a chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the skb, only consumed the page */
- buffer_info->skb = skb;
- }
- e1000_consume_page(buffer_info, rxtop, length);
- goto next_desc;
- } else {
- if (rxtop) {
- /* end of the chain */
- skb_fill_page_desc(rxtop,
- skb_shinfo(rxtop)->nr_frags,
- buffer_info->page, 0, length);
- /* re-use the current skb, we only consumed the
- * page */
- buffer_info->skb = skb;
- skb = rxtop;
- rxtop = NULL;
- e1000_consume_page(buffer_info, skb, length);
- } else {
- /* no chain, got EOP, this buf is the packet
- * copybreak to save the put_page/alloc_page */
- if (length <= copybreak &&
- skb_tailroom(skb) >= length) {
- u8 *vaddr;
- vaddr = kmap_atomic(buffer_info->page,
- KM_SKB_DATA_SOFTIRQ);
- memcpy(skb_tail_pointer(skb), vaddr,
- length);
- kunmap_atomic(vaddr,
- KM_SKB_DATA_SOFTIRQ);
- /* re-use the page, so don't erase
- * buffer_info->page */
- skb_put(skb, length);
- } else {
- skb_fill_page_desc(skb, 0,
- buffer_info->page, 0,
- length);
- e1000_consume_page(buffer_info, skb,
- length);
- }
- }
- }
-
- /* Receive Checksum Offload XXX recompute due to CRC strip? */
- e1000_rx_checksum(adapter,
- (u32)(status) |
- ((u32)(rx_desc->errors) << 24),
- le16_to_cpu(rx_desc->csum), skb);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- /* eth type trans needs skb->data to point to something */
- if (!pskb_may_pull(skb, ETH_HLEN)) {
- e_err("pskb_may_pull failed.\n");
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- e1000_receive_skb(adapter, netdev, skb, status,
- rx_desc->special);
-
-next_desc:
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
- adapter->alloc_rx_buf(adapter, cleaned_count,
- GFP_ATOMIC);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
- rx_ring->next_to_clean = i;
-
- cleaned_count = e1000_desc_unused(rx_ring);
- if (cleaned_count)
- adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
-
- adapter->total_rx_bytes += total_rx_bytes;
- adapter->total_rx_packets += total_rx_packets;
- return cleaned;
-}
-
-/**
- * e1000_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
- **/
-static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
-{
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_buffer *buffer_info;
- struct e1000_ps_page *ps_page;
- struct pci_dev *pdev = adapter->pdev;
- unsigned int i, j;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- if (adapter->clean_rx == e1000_clean_rx_irq)
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
- dma_unmap_page(&pdev->dev, buffer_info->dma,
- PAGE_SIZE,
- DMA_FROM_DEVICE);
- else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_bsize0,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- }
-
- if (buffer_info->page) {
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
-
- for (j = 0; j < PS_PAGE_BUFFERS; j++) {
- ps_page = &buffer_info->ps_pages[j];
- if (!ps_page->page)
- break;
- dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
- DMA_FROM_DEVICE);
- ps_page->dma = 0;
- put_page(ps_page->page);
- ps_page->page = NULL;
- }
- }
-
- /* there also may be some cached data from a chained receive */
- if (rx_ring->rx_skb_top) {
- dev_kfree_skb(rx_ring->rx_skb_top);
- rx_ring->rx_skb_top = NULL;
- }
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
- adapter->flags2 &= ~FLAG2_IS_DISCARDING;
-
- writel(0, adapter->hw.hw_addr + rx_ring->head);
- writel(0, adapter->hw.hw_addr + rx_ring->tail);
-}
-
-static void e1000e_downshift_workaround(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, downshift_task);
-
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
-}
-
-/**
- * e1000_intr_msi - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t e1000_intr_msi(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = er32(ICR);
-
- /*
- * read ICR disables interrupts using IAM
- */
-
- if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
- /*
- * ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers
- */
- if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
- (!(er32(STATUS) & E1000_STATUS_LU)))
- schedule_work(&adapter->downshift_task);
-
- /*
- * 80003ES2LAN workaround-- For packet buffer work-around on
- * link down event; disable receives here in the ISR and reset
- * adapter in watchdog
- */
- if (netif_carrier_ok(netdev) &&
- adapter->flags & FLAG_RX_NEEDS_RESTART) {
- /* disable receives */
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- adapter->flags |= FLAG_RX_RESTART_NOW;
- }
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- if (napi_schedule_prep(&adapter->napi)) {
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- }
-
- return IRQ_HANDLED;
-}
-
-/**
- * e1000_intr - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t e1000_intr(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl, icr = er32(ICR);
-
- if (!icr || test_bit(__E1000_DOWN, &adapter->state))
- return IRQ_NONE; /* Not our interrupt */
-
- /*
- * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
- * not set, then the adapter didn't send an interrupt
- */
- if (!(icr & E1000_ICR_INT_ASSERTED))
- return IRQ_NONE;
-
- /*
- * Interrupt Auto-Mask...upon reading ICR,
- * interrupts are masked. No need for the
- * IMC write
- */
-
- if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
- /*
- * ICH8 workaround-- Call gig speed drop workaround on cable
- * disconnect (LSC) before accessing any PHY registers
- */
- if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
- (!(er32(STATUS) & E1000_STATUS_LU)))
- schedule_work(&adapter->downshift_task);
-
- /*
- * 80003ES2LAN workaround--
- * For packet buffer work-around on link down event;
- * disable receives here in the ISR and
- * reset adapter in watchdog
- */
- if (netif_carrier_ok(netdev) &&
- (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
- /* disable receives */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- adapter->flags |= FLAG_RX_RESTART_NOW;
- }
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- if (napi_schedule_prep(&adapter->napi)) {
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- }
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t e1000_msix_other(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = er32(ICR);
-
- if (!(icr & E1000_ICR_INT_ASSERTED)) {
- if (!test_bit(__E1000_DOWN, &adapter->state))
- ew32(IMS, E1000_IMS_OTHER);
- return IRQ_NONE;
- }
-
- if (icr & adapter->eiac_mask)
- ew32(ICS, (icr & adapter->eiac_mask));
-
- if (icr & E1000_ICR_OTHER) {
- if (!(icr & E1000_ICR_LSC))
- goto no_link_interrupt;
- hw->mac.get_link_status = 1;
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
-no_link_interrupt:
- if (!test_bit(__E1000_DOWN, &adapter->state))
- ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
-
- return IRQ_HANDLED;
-}
-
-
-static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *tx_ring = adapter->tx_ring;
-
-
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
-
- if (!e1000_clean_tx_irq(adapter))
- /* Ring was not completely cleaned, so fire another interrupt */
- ew32(ICS, tx_ring->ims_val);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- /* Write the ITR value calculated at the end of the
- * previous interrupt.
- */
- if (adapter->rx_ring->set_itr) {
- writel(1000000000 / (adapter->rx_ring->itr_val * 256),
- adapter->hw.hw_addr + adapter->rx_ring->itr_register);
- adapter->rx_ring->set_itr = 0;
- }
-
- if (napi_schedule_prep(&adapter->napi)) {
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->napi);
- }
- return IRQ_HANDLED;
-}
-
-/**
- * e1000_configure_msix - Configure MSI-X hardware
- *
- * e1000_configure_msix sets up the hardware to properly
- * generate MSI-X interrupts.
- **/
-static void e1000_configure_msix(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- int vector = 0;
- u32 ctrl_ext, ivar = 0;
-
- adapter->eiac_mask = 0;
-
- /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
- if (hw->mac.type == e1000_82574) {
- u32 rfctl = er32(RFCTL);
- rfctl |= E1000_RFCTL_ACK_DIS;
- ew32(RFCTL, rfctl);
- }
-
-#define E1000_IVAR_INT_ALLOC_VALID 0x8
- /* Configure Rx vector */
- rx_ring->ims_val = E1000_IMS_RXQ0;
- adapter->eiac_mask |= rx_ring->ims_val;
- if (rx_ring->itr_val)
- writel(1000000000 / (rx_ring->itr_val * 256),
- hw->hw_addr + rx_ring->itr_register);
- else
- writel(1, hw->hw_addr + rx_ring->itr_register);
- ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
-
- /* Configure Tx vector */
- tx_ring->ims_val = E1000_IMS_TXQ0;
- vector++;
- if (tx_ring->itr_val)
- writel(1000000000 / (tx_ring->itr_val * 256),
- hw->hw_addr + tx_ring->itr_register);
- else
- writel(1, hw->hw_addr + tx_ring->itr_register);
- adapter->eiac_mask |= tx_ring->ims_val;
- ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
-
- /* set vector for Other Causes, e.g. link changes */
- vector++;
- ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
- if (rx_ring->itr_val)
- writel(1000000000 / (rx_ring->itr_val * 256),
- hw->hw_addr + E1000_EITR_82574(vector));
- else
- writel(1, hw->hw_addr + E1000_EITR_82574(vector));
-
- /* Cause Tx interrupts on every write back */
- ivar |= (1 << 31);
-
- ew32(IVAR, ivar);
-
- /* enable MSI-X PBA support */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
-
- /* Auto-Mask Other interrupts upon ICR read */
-#define E1000_EIAC_MASK_82574 0x01F00000
- ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
- ctrl_ext |= E1000_CTRL_EXT_EIAME;
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
-}
-
-void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
-{
- if (adapter->msix_entries) {
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else if (adapter->flags & FLAG_MSI_ENABLED) {
- pci_disable_msi(adapter->pdev);
- adapter->flags &= ~FLAG_MSI_ENABLED;
- }
-}
-
-/**
- * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
- *
- * Attempt to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
-{
- int err;
- int i;
-
- switch (adapter->int_mode) {
- case E1000E_INT_MODE_MSIX:
- if (adapter->flags & FLAG_HAS_MSIX) {
- adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
- adapter->msix_entries = kcalloc(adapter->num_vectors,
- sizeof(struct msix_entry),
- GFP_KERNEL);
- if (adapter->msix_entries) {
- for (i = 0; i < adapter->num_vectors; i++)
- adapter->msix_entries[i].entry = i;
-
- err = pci_enable_msix(adapter->pdev,
- adapter->msix_entries,
- adapter->num_vectors);
- if (err == 0)
- return;
- }
- /* MSI-X failed, so fall through and try MSI */
- e_err("Failed to initialize MSI-X interrupts. "
- "Falling back to MSI interrupts.\n");
- e1000e_reset_interrupt_capability(adapter);
- }
- adapter->int_mode = E1000E_INT_MODE_MSI;
- /* Fall through */
- case E1000E_INT_MODE_MSI:
- if (!pci_enable_msi(adapter->pdev)) {
- adapter->flags |= FLAG_MSI_ENABLED;
- } else {
- adapter->int_mode = E1000E_INT_MODE_LEGACY;
- e_err("Failed to initialize MSI interrupts. Falling "
- "back to legacy interrupts.\n");
- }
- /* Fall through */
- case E1000E_INT_MODE_LEGACY:
- /* Don't do anything; this is the system default */
- break;
- }
-
- /* store the number of vectors being used */
- adapter->num_vectors = 1;
-}
-
-/**
- * e1000_request_msix - Initialize MSI-X interrupts
- *
- * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
- * kernel.
- **/
-static int e1000_request_msix(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err = 0, vector = 0;
-
- if (strlen(netdev->name) < (IFNAMSIZ - 5))
- snprintf(adapter->rx_ring->name,
- sizeof(adapter->rx_ring->name) - 1,
- "%s-rx-0", netdev->name);
- else
- memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
- err = request_irq(adapter->msix_entries[vector].vector,
- e1000_intr_msix_rx, 0, adapter->rx_ring->name,
- netdev);
- if (err)
- goto out;
- adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
- adapter->rx_ring->itr_val = adapter->itr;
- vector++;
-
- if (strlen(netdev->name) < (IFNAMSIZ - 5))
- snprintf(adapter->tx_ring->name,
- sizeof(adapter->tx_ring->name) - 1,
- "%s-tx-0", netdev->name);
- else
- memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
- err = request_irq(adapter->msix_entries[vector].vector,
- e1000_intr_msix_tx, 0, adapter->tx_ring->name,
- netdev);
- if (err)
- goto out;
- adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
- adapter->tx_ring->itr_val = adapter->itr;
- vector++;
-
- err = request_irq(adapter->msix_entries[vector].vector,
- e1000_msix_other, 0, netdev->name, netdev);
- if (err)
- goto out;
-
- e1000_configure_msix(adapter);
- return 0;
-out:
- return err;
-}
-
-/**
- * e1000_request_irq - initialize interrupts
- *
- * Attempts to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int e1000_request_irq(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err;
-
- if (adapter->msix_entries) {
- err = e1000_request_msix(adapter);
- if (!err)
- return err;
- /* fall back to MSI */
- e1000e_reset_interrupt_capability(adapter);
- adapter->int_mode = E1000E_INT_MODE_MSI;
- e1000e_set_interrupt_capability(adapter);
- }
- if (adapter->flags & FLAG_MSI_ENABLED) {
- err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
- netdev->name, netdev);
- if (!err)
- return err;
-
- /* fall back to legacy interrupt */
- e1000e_reset_interrupt_capability(adapter);
- adapter->int_mode = E1000E_INT_MODE_LEGACY;
- }
-
- err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
- netdev->name, netdev);
- if (err)
- e_err("Unable to allocate interrupt, Error: %d\n", err);
-
- return err;
-}
-
-static void e1000_free_irq(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
-
- if (adapter->msix_entries) {
- int vector = 0;
-
- free_irq(adapter->msix_entries[vector].vector, netdev);
- vector++;
-
- free_irq(adapter->msix_entries[vector].vector, netdev);
- vector++;
-
- /* Other Causes interrupt vector */
- free_irq(adapter->msix_entries[vector].vector, netdev);
- return;
- }
-
- free_irq(adapter->pdev->irq, netdev);
-}
-
-/**
- * e1000_irq_disable - Mask off interrupt generation on the NIC
- **/
-static void e1000_irq_disable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- ew32(IMC, ~0);
- if (adapter->msix_entries)
- ew32(EIAC_82574, 0);
- e1e_flush();
-
- if (adapter->msix_entries) {
- int i;
- for (i = 0; i < adapter->num_vectors; i++)
- synchronize_irq(adapter->msix_entries[i].vector);
- } else {
- synchronize_irq(adapter->pdev->irq);
- }
-}
-
-/**
- * e1000_irq_enable - Enable default interrupt generation settings
- **/
-static void e1000_irq_enable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->msix_entries) {
- ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
- ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
- } else {
- ew32(IMS, IMS_ENABLE_MASK);
- }
- e1e_flush();
-}
-
-/**
- * e1000e_get_hw_control - get control of the h/w from f/w
- * @adapter: address of board private structure
- *
- * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that
- * the driver is loaded. For AMT version (only with 82573)
- * of the f/w this means that the network i/f is open.
- **/
-void e1000e_get_hw_control(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_ext;
- u32 swsm;
-
- /* Let firmware know the driver has taken over */
- if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
- swsm = er32(SWSM);
- ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
- } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
- ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
- }
-}
-
-/**
- * e1000e_release_hw_control - release control of the h/w to f/w
- * @adapter: address of board private structure
- *
- * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that the
- * driver is no longer loaded. For AMT version (only with 82573) i
- * of the f/w this means that the network i/f is closed.
- *
- **/
-void e1000e_release_hw_control(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_ext;
- u32 swsm;
-
- /* Let firmware taken over control of h/w */
- if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
- swsm = er32(SWSM);
- ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
- } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
- ctrl_ext = er32(CTRL_EXT);
- ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
- }
-}
-
-/**
- * @e1000_alloc_ring - allocate memory for a ring structure
- **/
-static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
- struct e1000_ring *ring)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
- GFP_KERNEL);
- if (!ring->desc)
- return -ENOMEM;
-
- return 0;
-}
-
-/**
- * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- int err = -ENOMEM, size;
-
- size = sizeof(struct e1000_buffer) * tx_ring->count;
- tx_ring->buffer_info = vzalloc(size);
- if (!tx_ring->buffer_info)
- goto err;
-
- /* round up to nearest 4K */
- tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
-
- err = e1000_alloc_ring_dma(adapter, tx_ring);
- if (err)
- goto err;
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- return 0;
-err:
- vfree(tx_ring->buffer_info);
- e_err("Unable to allocate memory for the transmit descriptor ring\n");
- return err;
-}
-
-/**
- * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- *
- * Returns 0 on success, negative on failure
- **/
-int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
-{
- struct e1000_ring *rx_ring = adapter->rx_ring;
- struct e1000_buffer *buffer_info;
- int i, size, desc_len, err = -ENOMEM;
-
- size = sizeof(struct e1000_buffer) * rx_ring->count;
- rx_ring->buffer_info = vzalloc(size);
- if (!rx_ring->buffer_info)
- goto err;
-
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
- sizeof(struct e1000_ps_page),
- GFP_KERNEL);
- if (!buffer_info->ps_pages)
- goto err_pages;
- }
-
- desc_len = sizeof(union e1000_rx_desc_packet_split);
-
- /* Round up to nearest 4K */
- rx_ring->size = rx_ring->count * desc_len;
- rx_ring->size = ALIGN(rx_ring->size, 4096);
-
- err = e1000_alloc_ring_dma(adapter, rx_ring);
- if (err)
- goto err_pages;
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
- rx_ring->rx_skb_top = NULL;
-
- return 0;
-
-err_pages:
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- kfree(buffer_info->ps_pages);
- }
-err:
- vfree(rx_ring->buffer_info);
- e_err("Unable to allocate memory for the receive descriptor ring\n");
- return err;
-}
-
-/**
- * e1000_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
- **/
-static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(adapter, buffer_info);
- }
-
- size = sizeof(struct e1000_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- writel(0, adapter->hw.hw_addr + tx_ring->head);
- writel(0, adapter->hw.hw_addr + tx_ring->tail);
-}
-
-/**
- * e1000e_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-void e1000e_free_tx_resources(struct e1000_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *tx_ring = adapter->tx_ring;
-
- e1000_clean_tx_ring(adapter);
-
- vfree(tx_ring->buffer_info);
- tx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
- tx_ring->desc = NULL;
-}
-
-/**
- * e1000e_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-
-void e1000e_free_rx_resources(struct e1000_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- int i;
-
- e1000_clean_rx_ring(adapter);
-
- for (i = 0; i < rx_ring->count; i++)
- kfree(rx_ring->buffer_info[i].ps_pages);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
- rx_ring->desc = NULL;
-}
-
-/**
- * e1000_update_itr - update the dynamic ITR value based on statistics
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput. This functionality is controlled
- * by the InterruptThrottleRate module parameter.
- **/
-static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
- u16 itr_setting, int packets,
- int bytes)
-{
- unsigned int retval = itr_setting;
-
- if (packets == 0)
- goto update_itr_done;
-
- switch (itr_setting) {
- case lowest_latency:
- /* handle TSO and jumbo frames */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512))
- retval = low_latency;
- break;
- case low_latency: /* 50 usec aka 20000 ints/s */
- if (bytes > 10000) {
- /* this if handles the TSO accounting */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
- retval = bulk_latency;
- else if ((packets > 35))
- retval = lowest_latency;
- } else if (bytes/packets > 2000) {
- retval = bulk_latency;
- } else if (packets <= 2 && bytes < 512) {
- retval = lowest_latency;
- }
- break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
- if (bytes > 25000) {
- if (packets > 35)
- retval = low_latency;
- } else if (bytes < 6000) {
- retval = low_latency;
- }
- break;
- }
-
-update_itr_done:
- return retval;
-}
-
-static void e1000_set_itr(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 current_itr;
- u32 new_itr = adapter->itr;
-
- /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
- if (adapter->link_speed != SPEED_1000) {
- current_itr = 0;
- new_itr = 4000;
- goto set_itr_now;
- }
-
- if (adapter->flags2 & FLAG2_DISABLE_AIM) {
- new_itr = 0;
- goto set_itr_now;
- }
-
- adapter->tx_itr = e1000_update_itr(adapter,
- adapter->tx_itr,
- adapter->total_tx_packets,
- adapter->total_tx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
- adapter->tx_itr = low_latency;
-
- adapter->rx_itr = e1000_update_itr(adapter,
- adapter->rx_itr,
- adapter->total_rx_packets,
- adapter->total_rx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
- adapter->rx_itr = low_latency;
-
- current_itr = max(adapter->rx_itr, adapter->tx_itr);
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 70000;
- break;
- case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
- break;
- case bulk_latency:
- new_itr = 4000;
- break;
- default:
- break;
- }
-
-set_itr_now:
- if (new_itr != adapter->itr) {
- /*
- * this attempts to bias the interrupt rate towards Bulk
- * by adding intermediate steps when interrupt rate is
- * increasing
- */
- new_itr = new_itr > adapter->itr ?
- min(adapter->itr + (new_itr >> 2), new_itr) :
- new_itr;
- adapter->itr = new_itr;
- adapter->rx_ring->itr_val = new_itr;
- if (adapter->msix_entries)
- adapter->rx_ring->set_itr = 1;
- else
- if (new_itr)
- ew32(ITR, 1000000000 / (new_itr * 256));
- else
- ew32(ITR, 0);
- }
-}
-
-/**
- * e1000_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- **/
-static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
-{
- adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
- if (!adapter->tx_ring)
- goto err;
-
- adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
- if (!adapter->rx_ring)
- goto err;
-
- return 0;
-err:
- e_err("Unable to allocate memory for queues\n");
- kfree(adapter->rx_ring);
- kfree(adapter->tx_ring);
- return -ENOMEM;
-}
-
-/**
- * e1000_clean - NAPI Rx polling callback
- * @napi: struct associated with this polling callback
- * @budget: amount of packets driver is allowed to process this poll
- **/
-static int e1000_clean(struct napi_struct *napi, int budget)
-{
- struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *poll_dev = adapter->netdev;
- int tx_cleaned = 1, work_done = 0;
-
- adapter = netdev_priv(poll_dev);
-
- if (adapter->msix_entries &&
- !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
- goto clean_rx;
-
- tx_cleaned = e1000_clean_tx_irq(adapter);
-
-clean_rx:
- adapter->clean_rx(adapter, &work_done, budget);
-
- if (!tx_cleaned)
- work_done = budget;
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- if (adapter->itr_setting & 3)
- e1000_set_itr(adapter);
- napi_complete(napi);
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
- if (adapter->msix_entries)
- ew32(IMS, adapter->rx_ring->ims_val);
- else
- e1000_irq_enable(adapter);
- }
- }
-
- return work_done;
-}
-
-static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 vfta, index;
-
- /* don't update vlan cookie if already programmed */
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- (vid == adapter->mng_vlan_id))
- return;
-
- /* add VID to filter table */
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- index = (vid >> 5) & 0x7F;
- vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
- vfta |= (1 << (vid & 0x1F));
- hw->mac.ops.write_vfta(hw, index, vfta);
- }
-
- set_bit(vid, adapter->active_vlans);
-}
-
-static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 vfta, index;
-
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- (vid == adapter->mng_vlan_id)) {
- /* release control to f/w */
- e1000e_release_hw_control(adapter);
- return;
- }
-
- /* remove VID from filter table */
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- index = (vid >> 5) & 0x7F;
- vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
- vfta &= ~(1 << (vid & 0x1F));
- hw->mac.ops.write_vfta(hw, index, vfta);
- }
-
- clear_bit(vid, adapter->active_vlans);
-}
-
-/**
- * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
- * @adapter: board private structure to initialize
- **/
-static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- /* disable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
- ew32(RCTL, rctl);
-
- if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- }
- }
-}
-
-/**
- * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
- * @adapter: board private structure to initialize
- **/
-static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
- /* enable VLAN receive filtering */
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_VFE;
- rctl &= ~E1000_RCTL_CFIEN;
- ew32(RCTL, rctl);
- }
-}
-
-/**
- * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
- * @adapter: board private structure to initialize
- **/
-static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl;
-
- /* disable VLAN tag insert/strip */
- ctrl = er32(CTRL);
- ctrl &= ~E1000_CTRL_VME;
- ew32(CTRL, ctrl);
-}
-
-/**
- * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
- * @adapter: board private structure to initialize
- **/
-static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl;
-
- /* enable VLAN tag insert/strip */
- ctrl = er32(CTRL);
- ctrl |= E1000_CTRL_VME;
- ew32(CTRL, ctrl);
-}
-
-static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- u16 vid = adapter->hw.mng_cookie.vlan_id;
- u16 old_vid = adapter->mng_vlan_id;
-
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
- e1000_vlan_rx_add_vid(netdev, vid);
- adapter->mng_vlan_id = vid;
- }
-
- if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
- e1000_vlan_rx_kill_vid(netdev, old_vid);
-}
-
-static void e1000_restore_vlan(struct e1000_adapter *adapter)
-{
- u16 vid;
-
- e1000_vlan_rx_add_vid(adapter->netdev, 0);
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- e1000_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 manc, manc2h, mdef, i, j;
-
- if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
- return;
-
- manc = er32(MANC);
-
- /*
- * enable receiving management packets to the host. this will probably
- * generate destination unreachable messages from the host OS, but
- * the packets will be handled on SMBUS
- */
- manc |= E1000_MANC_EN_MNG2HOST;
- manc2h = er32(MANC2H);
-
- switch (hw->mac.type) {
- default:
- manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
- break;
- case e1000_82574:
- case e1000_82583:
- /*
- * Check if IPMI pass-through decision filter already exists;
- * if so, enable it.
- */
- for (i = 0, j = 0; i < 8; i++) {
- mdef = er32(MDEF(i));
-
- /* Ignore filters with anything other than IPMI ports */
- if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
- continue;
-
- /* Enable this decision filter in MANC2H */
- if (mdef)
- manc2h |= (1 << i);
-
- j |= mdef;
- }
-
- if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
- break;
-
- /* Create new decision filter in an empty filter */
- for (i = 0, j = 0; i < 8; i++)
- if (er32(MDEF(i)) == 0) {
- ew32(MDEF(i), (E1000_MDEF_PORT_623 |
- E1000_MDEF_PORT_664));
- manc2h |= (1 << 1);
- j++;
- break;
- }
-
- if (!j)
- e_warn("Unable to create IPMI pass-through filter\n");
- break;
- }
-
- ew32(MANC2H, manc2h);
- ew32(MANC, manc);
-}
-
-/**
- * e1000_configure_tx - Configure Transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-static void e1000_configure_tx(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- u64 tdba;
- u32 tdlen, tctl, tipg, tarc;
- u32 ipgr1, ipgr2;
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
- tdba = tx_ring->dma;
- tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
- ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
- ew32(TDBAH, (tdba >> 32));
- ew32(TDLEN, tdlen);
- ew32(TDH, 0);
- ew32(TDT, 0);
- tx_ring->head = E1000_TDH;
- tx_ring->tail = E1000_TDT;
-
- /* Set the default values for the Tx Inter Packet Gap timer */
- tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */
- ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */
- ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */
-
- if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
- ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */
-
- tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
- tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
- ew32(TIPG, tipg);
-
- /* Set the Tx Interrupt Delay register */
- ew32(TIDV, adapter->tx_int_delay);
- /* Tx irq moderation */
- ew32(TADV, adapter->tx_abs_int_delay);
-
- if (adapter->flags2 & FLAG2_DMA_BURST) {
- u32 txdctl = er32(TXDCTL(0));
- txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
- E1000_TXDCTL_WTHRESH);
- /*
- * set up some performance related parameters to encourage the
- * hardware to use the bus more efficiently in bursts, depends
- * on the tx_int_delay to be enabled,
- * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
- * hthresh = 1 ==> prefetch when one or more available
- * pthresh = 0x1f ==> prefetch if internal cache 31 or less
- * BEWARE: this seems to work but should be considered first if
- * there are Tx hangs or other Tx related bugs
- */
- txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
- ew32(TXDCTL(0), txdctl);
- /* erratum work around: set txdctl the same for both queues */
- ew32(TXDCTL(1), txdctl);
- }
-
- /* Program the Transmit Control Register */
- tctl = er32(TCTL);
- tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
- if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
- tarc = er32(TARC(0));
- /*
- * set the speed mode bit, we'll clear it if we're not at
- * gigabit link later
- */
-#define SPEED_MODE_BIT (1 << 21)
- tarc |= SPEED_MODE_BIT;
- ew32(TARC(0), tarc);
- }
-
- /* errata: program both queues to unweighted RR */
- if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
- tarc = er32(TARC(0));
- tarc |= 1;
- ew32(TARC(0), tarc);
- tarc = er32(TARC(1));
- tarc |= 1;
- ew32(TARC(1), tarc);
- }
-
- /* Setup Transmit Descriptor Settings for eop descriptor */
- adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
-
- /* only set IDE if we are delaying interrupts using the timers */
- if (adapter->tx_int_delay)
- adapter->txd_cmd |= E1000_TXD_CMD_IDE;
-
- /* enable Report Status bit */
- adapter->txd_cmd |= E1000_TXD_CMD_RS;
-
- ew32(TCTL, tctl);
-
- e1000e_config_collision_dist(hw);
-}
-
-/**
- * e1000_setup_rctl - configure the receive control registers
- * @adapter: Board private structure
- **/
-#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
- (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
-static void e1000_setup_rctl(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl, rfctl;
- u32 pages = 0;
-
- /* Workaround Si errata on 82579 - configure jumbo frame flow */
- if (hw->mac.type == e1000_pch2lan) {
- s32 ret_val;
-
- if (adapter->netdev->mtu > ETH_DATA_LEN)
- ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
- else
- ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
-
- if (ret_val)
- e_dbg("failed to enable jumbo frame workaround mode\n");
- }
-
- /* Program MC offset vector base */
- rctl = er32(RCTL);
- rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
- rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
- E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
- (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
-
- /* Do not Store bad packets */
- rctl &= ~E1000_RCTL_SBP;
-
- /* Enable Long Packet receive */
- if (adapter->netdev->mtu <= ETH_DATA_LEN)
- rctl &= ~E1000_RCTL_LPE;
- else
- rctl |= E1000_RCTL_LPE;
-
- /* Some systems expect that the CRC is included in SMBUS traffic. The
- * hardware strips the CRC before sending to both SMBUS (BMC) and to
- * host memory when this is enabled
- */
- if (adapter->flags2 & FLAG2_CRC_STRIPPING)
- rctl |= E1000_RCTL_SECRC;
-
- /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
- if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
- u16 phy_data;
-
- e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
- phy_data &= 0xfff8;
- phy_data |= (1 << 2);
- e1e_wphy(hw, PHY_REG(770, 26), phy_data);
-
- e1e_rphy(hw, 22, &phy_data);
- phy_data &= 0x0fff;
- phy_data |= (1 << 14);
- e1e_wphy(hw, 0x10, 0x2823);
- e1e_wphy(hw, 0x11, 0x0003);
- e1e_wphy(hw, 22, phy_data);
- }
-
- /* Setup buffer sizes */
- rctl &= ~E1000_RCTL_SZ_4096;
- rctl |= E1000_RCTL_BSEX;
- switch (adapter->rx_buffer_len) {
- case 2048:
- default:
- rctl |= E1000_RCTL_SZ_2048;
- rctl &= ~E1000_RCTL_BSEX;
- break;
- case 4096:
- rctl |= E1000_RCTL_SZ_4096;
- break;
- case 8192:
- rctl |= E1000_RCTL_SZ_8192;
- break;
- case 16384:
- rctl |= E1000_RCTL_SZ_16384;
- break;
- }
-
- /*
- * 82571 and greater support packet-split where the protocol
- * header is placed in skb->data and the packet data is
- * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
- * In the case of a non-split, skb->data is linearly filled,
- * followed by the page buffers. Therefore, skb->data is
- * sized to hold the largest protocol header.
- *
- * allocations using alloc_page take too long for regular MTU
- * so only enable packet split for jumbo frames
- *
- * Using pages when the page size is greater than 16k wastes
- * a lot of memory, since we allocate 3 pages at all times
- * per packet.
- */
- pages = PAGE_USE_COUNT(adapter->netdev->mtu);
- if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) &&
- (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
- adapter->rx_ps_pages = pages;
- else
- adapter->rx_ps_pages = 0;
-
- if (adapter->rx_ps_pages) {
- u32 psrctl = 0;
-
- /* Configure extra packet-split registers */
- rfctl = er32(RFCTL);
- rfctl |= E1000_RFCTL_EXTEN;
- /*
- * disable packet split support for IPv6 extension headers,
- * because some malformed IPv6 headers can hang the Rx
- */
- rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
- E1000_RFCTL_NEW_IPV6_EXT_DIS);
-
- ew32(RFCTL, rfctl);
-
- /* Enable Packet split descriptors */
- rctl |= E1000_RCTL_DTYP_PS;
-
- psrctl |= adapter->rx_ps_bsize0 >>
- E1000_PSRCTL_BSIZE0_SHIFT;
-
- switch (adapter->rx_ps_pages) {
- case 3:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE3_SHIFT;
- case 2:
- psrctl |= PAGE_SIZE <<
- E1000_PSRCTL_BSIZE2_SHIFT;
- case 1:
- psrctl |= PAGE_SIZE >>
- E1000_PSRCTL_BSIZE1_SHIFT;
- break;
- }
-
- ew32(PSRCTL, psrctl);
- }
-
- ew32(RCTL, rctl);
- /* just started the receive unit, no need to restart */
- adapter->flags &= ~FLAG_RX_RESTART_NOW;
-}
-
-/**
- * e1000_configure_rx - Configure Receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-static void e1000_configure_rx(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_ring *rx_ring = adapter->rx_ring;
- u64 rdba;
- u32 rdlen, rctl, rxcsum, ctrl_ext;
-
- if (adapter->rx_ps_pages) {
- /* this is a 32 byte descriptor */
- rdlen = rx_ring->count *
- sizeof(union e1000_rx_desc_packet_split);
- adapter->clean_rx = e1000_clean_rx_irq_ps;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
- } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
- rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_jumbo_rx_irq;
- adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
- } else {
- rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
- adapter->clean_rx = e1000_clean_rx_irq;
- adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
- }
-
- /* disable receives while setting up the descriptors */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- e1e_flush();
- usleep_range(10000, 20000);
-
- if (adapter->flags2 & FLAG2_DMA_BURST) {
- /*
- * set the writeback threshold (only takes effect if the RDTR
- * is set). set GRAN=1 and write back up to 0x4 worth, and
- * enable prefetching of 0x20 Rx descriptors
- * granularity = 01
- * wthresh = 04,
- * hthresh = 04,
- * pthresh = 0x20
- */
- ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
- ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
-
- /*
- * override the delay timers for enabling bursting, only if
- * the value was not set by the user via module options
- */
- if (adapter->rx_int_delay == DEFAULT_RDTR)
- adapter->rx_int_delay = BURST_RDTR;
- if (adapter->rx_abs_int_delay == DEFAULT_RADV)
- adapter->rx_abs_int_delay = BURST_RADV;
- }
-
- /* set the Receive Delay Timer Register */
- ew32(RDTR, adapter->rx_int_delay);
-
- /* irq moderation */
- ew32(RADV, adapter->rx_abs_int_delay);
- if ((adapter->itr_setting != 0) && (adapter->itr != 0))
- ew32(ITR, 1000000000 / (adapter->itr * 256));
-
- ctrl_ext = er32(CTRL_EXT);
- /* Auto-Mask interrupts upon ICR access */
- ctrl_ext |= E1000_CTRL_EXT_IAME;
- ew32(IAM, 0xffffffff);
- ew32(CTRL_EXT, ctrl_ext);
- e1e_flush();
-
- /*
- * Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring
- */
- rdba = rx_ring->dma;
- ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
- ew32(RDBAH, (rdba >> 32));
- ew32(RDLEN, rdlen);
- ew32(RDH, 0);
- ew32(RDT, 0);
- rx_ring->head = E1000_RDH;
- rx_ring->tail = E1000_RDT;
-
- /* Enable Receive Checksum Offload for TCP and UDP */
- rxcsum = er32(RXCSUM);
- if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
- rxcsum |= E1000_RXCSUM_TUOFL;
-
- /*
- * IPv4 payload checksum for UDP fragments must be
- * used in conjunction with packet-split.
- */
- if (adapter->rx_ps_pages)
- rxcsum |= E1000_RXCSUM_IPPCSE;
- } else {
- rxcsum &= ~E1000_RXCSUM_TUOFL;
- /* no need to clear IPPCSE as it defaults to 0 */
- }
- ew32(RXCSUM, rxcsum);
-
- /*
- * Enable early receives on supported devices, only takes effect when
- * packet size is equal or larger than the specified value (in 8 byte
- * units), e.g. using jumbo frames when setting to E1000_ERT_2048
- */
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan)) {
- if (adapter->netdev->mtu > ETH_DATA_LEN) {
- u32 rxdctl = er32(RXDCTL(0));
- ew32(RXDCTL(0), rxdctl | 0x3);
- if (adapter->flags & FLAG_HAS_ERT)
- ew32(ERT, E1000_ERT_2048 | (1 << 13));
- /*
- * With jumbo frames and early-receive enabled,
- * excessive C-state transition latencies result in
- * dropped transactions.
- */
- pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
- } else {
- pm_qos_update_request(&adapter->netdev->pm_qos_req,
- PM_QOS_DEFAULT_VALUE);
- }
- }
-
- /* Enable Receives */
- ew32(RCTL, rctl);
-}
-
-/**
- * e1000_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates the Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
- u32 mc_addr_count)
-{
- hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
-}
-
-/**
- * e1000_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-static void e1000_set_multi(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u8 *mta_list;
- u32 rctl;
-
- /* Check for Promiscuous and All Multicast modes */
-
- rctl = er32(RCTL);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- rctl &= ~E1000_RCTL_VFE;
- /* Do not hardware filter VLANs in promisc mode */
- e1000e_vlan_filter_disable(adapter);
- } else {
- if (netdev->flags & IFF_ALLMULTI) {
- rctl |= E1000_RCTL_MPE;
- rctl &= ~E1000_RCTL_UPE;
- } else {
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
- }
- e1000e_vlan_filter_enable(adapter);
- }
-
- ew32(RCTL, rctl);
-
- if (!netdev_mc_empty(netdev)) {
- int i = 0;
-
- mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
- if (!mta_list)
- return;
-
- /* prepare a packed array of only addresses. */
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
-
- e1000_update_mc_addr_list(hw, mta_list, i);
- kfree(mta_list);
- } else {
- /*
- * if we're called from probe, we might not have
- * anything to do here, so clear out the list
- */
- e1000_update_mc_addr_list(hw, NULL, 0);
- }
-
- if (netdev->features & NETIF_F_HW_VLAN_RX)
- e1000e_vlan_strip_enable(adapter);
- else
- e1000e_vlan_strip_disable(adapter);
-}
-
-/**
- * e1000_configure - configure the hardware for Rx and Tx
- * @adapter: private board structure
- **/
-static void e1000_configure(struct e1000_adapter *adapter)
-{
- e1000_set_multi(adapter->netdev);
-
- e1000_restore_vlan(adapter);
- e1000_init_manageability_pt(adapter);
-
- e1000_configure_tx(adapter);
- e1000_setup_rctl(adapter);
- e1000_configure_rx(adapter);
- adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring),
- GFP_KERNEL);
-}
-
-/**
- * e1000e_power_up_phy - restore link in case the phy was powered down
- * @adapter: address of board private structure
- *
- * The phy may be powered down to save power and turn off link when the
- * driver is unloaded and wake on lan is not enabled (among others)
- * *** this routine MUST be followed by a call to e1000e_reset ***
- **/
-void e1000e_power_up_phy(struct e1000_adapter *adapter)
-{
- if (adapter->hw.phy.ops.power_up)
- adapter->hw.phy.ops.power_up(&adapter->hw);
-
- adapter->hw.mac.ops.setup_link(&adapter->hw);
-}
-
-/**
- * e1000_power_down_phy - Power down the PHY
- *
- * Power down the PHY so no link is implied when interface is down.
- * The PHY cannot be powered down if management or WoL is active.
- */
-static void e1000_power_down_phy(struct e1000_adapter *adapter)
-{
- /* WoL is enabled */
- if (adapter->wol)
- return;
-
- if (adapter->hw.phy.ops.power_down)
- adapter->hw.phy.ops.power_down(&adapter->hw);
-}
-
-/**
- * e1000e_reset - bring the hardware into a known good state
- *
- * This function boots the hardware and enables some settings that
- * require a configuration cycle of the hardware - those cannot be
- * set/changed during runtime. After reset the device needs to be
- * properly configured for Rx, Tx etc.
- */
-void e1000e_reset(struct e1000_adapter *adapter)
-{
- struct e1000_mac_info *mac = &adapter->hw.mac;
- struct e1000_fc_info *fc = &adapter->hw.fc;
- struct e1000_hw *hw = &adapter->hw;
- u32 tx_space, min_tx_space, min_rx_space;
- u32 pba = adapter->pba;
- u16 hwm;
-
- /* reset Packet Buffer Allocation to default */
- ew32(PBA, pba);
-
- if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
- /*
- * To maintain wire speed transmits, the Tx FIFO should be
- * large enough to accommodate two full transmit packets,
- * rounded up to the next 1KB and expressed in KB. Likewise,
- * the Rx FIFO should be large enough to accommodate at least
- * one full receive packet and is similarly rounded up and
- * expressed in KB.
- */
- pba = er32(PBA);
- /* upper 16 bits has Tx packet buffer allocation size in KB */
- tx_space = pba >> 16;
- /* lower 16 bits has Rx packet buffer allocation size in KB */
- pba &= 0xffff;
- /*
- * the Tx fifo also stores 16 bytes of information about the Tx
- * but don't include ethernet FCS because hardware appends it
- */
- min_tx_space = (adapter->max_frame_size +
- sizeof(struct e1000_tx_desc) -
- ETH_FCS_LEN) * 2;
- min_tx_space = ALIGN(min_tx_space, 1024);
- min_tx_space >>= 10;
- /* software strips receive CRC, so leave room for it */
- min_rx_space = adapter->max_frame_size;
- min_rx_space = ALIGN(min_rx_space, 1024);
- min_rx_space >>= 10;
-
- /*
- * If current Tx allocation is less than the min Tx FIFO size,
- * and the min Tx FIFO size is less than the current Rx FIFO
- * allocation, take space away from current Rx allocation
- */
- if ((tx_space < min_tx_space) &&
- ((min_tx_space - tx_space) < pba)) {
- pba -= min_tx_space - tx_space;
-
- /*
- * if short on Rx space, Rx wins and must trump Tx
- * adjustment or use Early Receive if available
- */
- if ((pba < min_rx_space) &&
- (!(adapter->flags & FLAG_HAS_ERT)))
- /* ERT enabled in e1000_configure_rx */
- pba = min_rx_space;
- }
-
- ew32(PBA, pba);
- }
-
- /*
- * flow control settings
- *
- * The high water mark must be low enough to fit one full frame
- * (or the size used for early receive) above it in the Rx FIFO.
- * Set it to the lower of:
- * - 90% of the Rx FIFO size, and
- * - the full Rx FIFO size minus the early receive size (for parts
- * with ERT support assuming ERT set to E1000_ERT_2048), or
- * - the full Rx FIFO size minus one full frame
- */
- if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
- fc->pause_time = 0xFFFF;
- else
- fc->pause_time = E1000_FC_PAUSE_TIME;
- fc->send_xon = 1;
- fc->current_mode = fc->requested_mode;
-
- switch (hw->mac.type) {
- default:
- if ((adapter->flags & FLAG_HAS_ERT) &&
- (adapter->netdev->mtu > ETH_DATA_LEN))
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - (E1000_ERT_2048 << 3)));
- else
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - adapter->max_frame_size));
-
- fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
- fc->low_water = fc->high_water - 8;
- break;
- case e1000_pchlan:
- /*
- * Workaround PCH LOM adapter hangs with certain network
- * loads. If hangs persist, try disabling Tx flow control.
- */
- if (adapter->netdev->mtu > ETH_DATA_LEN) {
- fc->high_water = 0x3500;
- fc->low_water = 0x1500;
- } else {
- fc->high_water = 0x5000;
- fc->low_water = 0x3000;
- }
- fc->refresh_time = 0x1000;
- break;
- case e1000_pch2lan:
- fc->high_water = 0x05C20;
- fc->low_water = 0x05048;
- fc->pause_time = 0x0650;
- fc->refresh_time = 0x0400;
- if (adapter->netdev->mtu > ETH_DATA_LEN) {
- pba = 14;
- ew32(PBA, pba);
- }
- break;
- }
-
- /*
- * Disable Adaptive Interrupt Moderation if 2 full packets cannot
- * fit in receive buffer and early-receive not supported.
- */
- if (adapter->itr_setting & 0x3) {
- if (((adapter->max_frame_size * 2) > (pba << 10)) &&
- !(adapter->flags & FLAG_HAS_ERT)) {
- if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
- dev_info(&adapter->pdev->dev,
- "Interrupt Throttle Rate turned off\n");
- adapter->flags2 |= FLAG2_DISABLE_AIM;
- ew32(ITR, 0);
- }
- } else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
- dev_info(&adapter->pdev->dev,
- "Interrupt Throttle Rate turned on\n");
- adapter->flags2 &= ~FLAG2_DISABLE_AIM;
- adapter->itr = 20000;
- ew32(ITR, 1000000000 / (adapter->itr * 256));
- }
- }
-
- /* Allow time for pending master requests to run */
- mac->ops.reset_hw(hw);
-
- /*
- * For parts with AMT enabled, let the firmware know
- * that the network interface is in control
- */
- if (adapter->flags & FLAG_HAS_AMT)
- e1000e_get_hw_control(adapter);
-
- ew32(WUC, 0);
-
- if (mac->ops.init_hw(hw))
- e_err("Hardware Error\n");
-
- e1000_update_mng_vlan(adapter);
-
- /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
- ew32(VET, ETH_P_8021Q);
-
- e1000e_reset_adaptive(hw);
-
- if (!netif_running(adapter->netdev) &&
- !test_bit(__E1000_TESTING, &adapter->state)) {
- e1000_power_down_phy(adapter);
- return;
- }
-
- e1000_get_phy_info(hw);
-
- if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
- !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
- u16 phy_data = 0;
- /*
- * speed up time to link by disabling smart power down, ignore
- * the return value of this function because there is nothing
- * different we would do if it failed
- */
- e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
- phy_data &= ~IGP02E1000_PM_SPD;
- e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
- }
-}
-
-int e1000e_up(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* hardware has been reset, we need to reload some things */
- e1000_configure(adapter);
-
- clear_bit(__E1000_DOWN, &adapter->state);
-
- napi_enable(&adapter->napi);
- if (adapter->msix_entries)
- e1000_configure_msix(adapter);
- e1000_irq_enable(adapter);
-
- netif_start_queue(adapter->netdev);
-
- /* fire a link change interrupt to start the watchdog */
- if (adapter->msix_entries)
- ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
- else
- ew32(ICS, E1000_ICS_LSC);
-
- return 0;
-}
-
-static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (!(adapter->flags2 & FLAG2_DMA_BURST))
- return;
-
- /* flush pending descriptor writebacks to memory */
- ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
- ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
-
- /* execute the writes immediately */
- e1e_flush();
-}
-
-static void e1000e_update_stats(struct e1000_adapter *adapter);
-
-void e1000e_down(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 tctl, rctl;
-
- /*
- * signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer
- */
- set_bit(__E1000_DOWN, &adapter->state);
-
- /* disable receives in the hardware */
- rctl = er32(RCTL);
- ew32(RCTL, rctl & ~E1000_RCTL_EN);
- /* flush and sleep below */
-
- netif_stop_queue(netdev);
-
- /* disable transmits in the hardware */
- tctl = er32(TCTL);
- tctl &= ~E1000_TCTL_EN;
- ew32(TCTL, tctl);
- /* flush both disables and wait for them to finish */
- e1e_flush();
- usleep_range(10000, 20000);
-
- napi_disable(&adapter->napi);
- e1000_irq_disable(adapter);
-
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- netif_carrier_off(netdev);
-
- spin_lock(&adapter->stats64_lock);
- e1000e_update_stats(adapter);
- spin_unlock(&adapter->stats64_lock);
-
- e1000e_flush_descriptors(adapter);
- e1000_clean_tx_ring(adapter);
- e1000_clean_rx_ring(adapter);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- if (!pci_channel_offline(adapter->pdev))
- e1000e_reset(adapter);
-
- /*
- * TODO: for power management, we could drop the link and
- * pci_disable_device here.
- */
-}
-
-void e1000e_reinit_locked(struct e1000_adapter *adapter)
-{
- might_sleep();
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
- e1000e_down(adapter);
- e1000e_up(adapter);
- clear_bit(__E1000_RESETTING, &adapter->state);
-}
-
-/**
- * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
- * @adapter: board private structure to initialize
- *
- * e1000_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
-
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
- adapter->rx_ps_bsize0 = 128;
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
- spin_lock_init(&adapter->stats64_lock);
-
- e1000e_set_interrupt_capability(adapter);
-
- if (e1000_alloc_queues(adapter))
- return -ENOMEM;
-
- /* Explicitly disable IRQ since the NIC can be in any state. */
- e1000_irq_disable(adapter);
-
- set_bit(__E1000_DOWN, &adapter->state);
- return 0;
-}
-
-/**
- * e1000_intr_msi_test - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t e1000_intr_msi_test(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = er32(ICR);
-
- e_dbg("icr is %08X\n", icr);
- if (icr & E1000_ICR_RXSEQ) {
- adapter->flags &= ~FLAG_MSI_TEST_FAILED;
- wmb();
- }
-
- return IRQ_HANDLED;
-}
-
-/**
- * e1000_test_msi_interrupt - Returns 0 for successful test
- * @adapter: board private struct
- *
- * code flow taken from tg3.c
- **/
-static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- int err;
-
- /* poll_enable hasn't been called yet, so don't need disable */
- /* clear any pending events */
- er32(ICR);
-
- /* free the real vector and request a test handler */
- e1000_free_irq(adapter);
- e1000e_reset_interrupt_capability(adapter);
-
- /* Assume that the test fails, if it succeeds then the test
- * MSI irq handler will unset this flag */
- adapter->flags |= FLAG_MSI_TEST_FAILED;
-
- err = pci_enable_msi(adapter->pdev);
- if (err)
- goto msi_test_failed;
-
- err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
- netdev->name, netdev);
- if (err) {
- pci_disable_msi(adapter->pdev);
- goto msi_test_failed;
- }
-
- wmb();
-
- e1000_irq_enable(adapter);
-
- /* fire an unusual interrupt on the test handler */
- ew32(ICS, E1000_ICS_RXSEQ);
- e1e_flush();
- msleep(50);
-
- e1000_irq_disable(adapter);
-
- rmb();
-
- if (adapter->flags & FLAG_MSI_TEST_FAILED) {
- adapter->int_mode = E1000E_INT_MODE_LEGACY;
- e_info("MSI interrupt test failed, using legacy interrupt.\n");
- } else
- e_dbg("MSI interrupt test succeeded!\n");
-
- free_irq(adapter->pdev->irq, netdev);
- pci_disable_msi(adapter->pdev);
-
-msi_test_failed:
- e1000e_set_interrupt_capability(adapter);
- return e1000_request_irq(adapter);
-}
-
-/**
- * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
- * @adapter: board private struct
- *
- * code flow taken from tg3.c, called with e1000 interrupts disabled.
- **/
-static int e1000_test_msi(struct e1000_adapter *adapter)
-{
- int err;
- u16 pci_cmd;
-
- if (!(adapter->flags & FLAG_MSI_ENABLED))
- return 0;
-
- /* disable SERR in case the MSI write causes a master abort */
- pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
- if (pci_cmd & PCI_COMMAND_SERR)
- pci_write_config_word(adapter->pdev, PCI_COMMAND,
- pci_cmd & ~PCI_COMMAND_SERR);
-
- err = e1000_test_msi_interrupt(adapter);
-
- /* re-enable SERR */
- if (pci_cmd & PCI_COMMAND_SERR) {
- pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
- pci_cmd |= PCI_COMMAND_SERR;
- pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
- }
-
- return err;
-}
-
-/**
- * e1000_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-static int e1000_open(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- int err;
-
- /* disallow open during test */
- if (test_bit(__E1000_TESTING, &adapter->state))
- return -EBUSY;
-
- pm_runtime_get_sync(&pdev->dev);
-
- netif_carrier_off(netdev);
-
- /* allocate transmit descriptors */
- err = e1000e_setup_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = e1000e_setup_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- /*
- * If AMT is enabled, let the firmware know that the network
- * interface is now open and reset the part to a known state.
- */
- if (adapter->flags & FLAG_HAS_AMT) {
- e1000e_get_hw_control(adapter);
- e1000e_reset(adapter);
- }
-
- e1000e_power_up_phy(adapter);
-
- adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
- e1000_update_mng_vlan(adapter);
-
- /* DMA latency requirement to workaround early-receive/jumbo issue */
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan))
- pm_qos_add_request(&adapter->netdev->pm_qos_req,
- PM_QOS_CPU_DMA_LATENCY,
- PM_QOS_DEFAULT_VALUE);
-
- /*
- * before we allocate an interrupt, we must be ready to handle it.
- * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
- * as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so.
- */
- e1000_configure(adapter);
-
- err = e1000_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- /*
- * Work around PCIe errata with MSI interrupts causing some chipsets to
- * ignore e1000e MSI messages, which means we need to test our MSI
- * interrupt now
- */
- if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
- err = e1000_test_msi(adapter);
- if (err) {
- e_err("Interrupt allocation failed\n");
- goto err_req_irq;
- }
- }
-
- /* From here on the code is the same as e1000e_up() */
- clear_bit(__E1000_DOWN, &adapter->state);
-
- napi_enable(&adapter->napi);
-
- e1000_irq_enable(adapter);
-
- netif_start_queue(netdev);
-
- adapter->idle_check = true;
- pm_runtime_put(&pdev->dev);
-
- /* fire a link status change interrupt to start the watchdog */
- if (adapter->msix_entries)
- ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
- else
- ew32(ICS, E1000_ICS_LSC);
-
- return 0;
-
-err_req_irq:
- e1000e_release_hw_control(adapter);
- e1000_power_down_phy(adapter);
- e1000e_free_rx_resources(adapter);
-err_setup_rx:
- e1000e_free_tx_resources(adapter);
-err_setup_tx:
- e1000e_reset(adapter);
- pm_runtime_put_sync(&pdev->dev);
-
- return err;
-}
-
-/**
- * e1000_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-static int e1000_close(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct pci_dev *pdev = adapter->pdev;
-
- WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
-
- pm_runtime_get_sync(&pdev->dev);
-
- if (!test_bit(__E1000_DOWN, &adapter->state)) {
- e1000e_down(adapter);
- e1000_free_irq(adapter);
- }
- e1000_power_down_phy(adapter);
-
- e1000e_free_tx_resources(adapter);
- e1000e_free_rx_resources(adapter);
-
- /*
- * kill manageability vlan ID if supported, but not if a vlan with
- * the same ID is registered on the host OS (let 8021q kill it)
- */
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
- e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-
- /*
- * If AMT is enabled, let the firmware know that the network
- * interface is now closed
- */
- if ((adapter->flags & FLAG_HAS_AMT) &&
- !test_bit(__E1000_TESTING, &adapter->state))
- e1000e_release_hw_control(adapter);
-
- if ((adapter->flags & FLAG_HAS_ERT) ||
- (adapter->hw.mac.type == e1000_pch2lan))
- pm_qos_remove_request(&adapter->netdev->pm_qos_req);
-
- pm_runtime_put_sync(&pdev->dev);
-
- return 0;
-}
-/**
- * e1000_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-static int e1000_set_mac(struct net_device *netdev, void *p)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
-
- e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
-
- if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
- /* activate the work around */
- e1000e_set_laa_state_82571(&adapter->hw, 1);
-
- /*
- * Hold a copy of the LAA in RAR[14] This is done so that
- * between the time RAR[0] gets clobbered and the time it
- * gets fixed (in e1000_watchdog), the actual LAA is in one
- * of the RARs and no incoming packets directed to this port
- * are dropped. Eventually the LAA will be in RAR[0] and
- * RAR[14]
- */
- e1000e_rar_set(&adapter->hw,
- adapter->hw.mac.addr,
- adapter->hw.mac.rar_entry_count - 1);
- }
-
- return 0;
-}
-
-/**
- * e1000e_update_phy_task - work thread to update phy
- * @work: pointer to our work struct
- *
- * this worker thread exists because we must acquire a
- * semaphore to read the phy, which we could msleep while
- * waiting for it, and we can't msleep in a timer.
- **/
-static void e1000e_update_phy_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, update_phy_task);
-
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- e1000_get_phy_info(&adapter->hw);
-}
-
-/*
- * Need to wait a few seconds after link up to get diagnostic information from
- * the phy
- */
-static void e1000_update_phy_info(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- schedule_work(&adapter->update_phy_task);
-}
-
-/**
- * e1000e_update_phy_stats - Update the PHY statistics counters
- * @adapter: board private structure
- *
- * Read/clear the upper 16-bit PHY registers and read/accumulate lower
- **/
-static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- s32 ret_val;
- u16 phy_data;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return;
-
- /*
- * A page set is expensive so check if already on desired page.
- * If not, set to the page with the PHY status registers.
- */
- hw->phy.addr = 1;
- ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
- &phy_data);
- if (ret_val)
- goto release;
- if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
- ret_val = hw->phy.ops.set_page(hw,
- HV_STATS_PAGE << IGP_PAGE_SHIFT);
- if (ret_val)
- goto release;
- }
-
- /* Single Collision Count */
- hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.scc += phy_data;
-
- /* Excessive Collision Count */
- hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.ecol += phy_data;
-
- /* Multiple Collision Count */
- hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.mcc += phy_data;
-
- /* Late Collision Count */
- hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.latecol += phy_data;
-
- /* Collision Count - also used for adaptive IFS */
- hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
- if (!ret_val)
- hw->mac.collision_delta = phy_data;
-
- /* Defer Count */
- hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.dc += phy_data;
-
- /* Transmit with no CRS */
- hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
- ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
- if (!ret_val)
- adapter->stats.tncrs += phy_data;
-
-release:
- hw->phy.ops.release(hw);
-}
-
-/**
- * e1000e_update_stats - Update the board statistics counters
- * @adapter: board private structure
- **/
-static void e1000e_update_stats(struct e1000_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
-
- /*
- * Prevent stats update while adapter is being reset, or if the pci
- * connection is down.
- */
- if (adapter->link_speed == 0)
- return;
- if (pci_channel_offline(pdev))
- return;
-
- adapter->stats.crcerrs += er32(CRCERRS);
- adapter->stats.gprc += er32(GPRC);
- adapter->stats.gorc += er32(GORCL);
- er32(GORCH); /* Clear gorc */
- adapter->stats.bprc += er32(BPRC);
- adapter->stats.mprc += er32(MPRC);
- adapter->stats.roc += er32(ROC);
-
- adapter->stats.mpc += er32(MPC);
-
- /* Half-duplex statistics */
- if (adapter->link_duplex == HALF_DUPLEX) {
- if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
- e1000e_update_phy_stats(adapter);
- } else {
- adapter->stats.scc += er32(SCC);
- adapter->stats.ecol += er32(ECOL);
- adapter->stats.mcc += er32(MCC);
- adapter->stats.latecol += er32(LATECOL);
- adapter->stats.dc += er32(DC);
-
- hw->mac.collision_delta = er32(COLC);
-
- if ((hw->mac.type != e1000_82574) &&
- (hw->mac.type != e1000_82583))
- adapter->stats.tncrs += er32(TNCRS);
- }
- adapter->stats.colc += hw->mac.collision_delta;
- }
-
- adapter->stats.xonrxc += er32(XONRXC);
- adapter->stats.xontxc += er32(XONTXC);
- adapter->stats.xoffrxc += er32(XOFFRXC);
- adapter->stats.xofftxc += er32(XOFFTXC);
- adapter->stats.gptc += er32(GPTC);
- adapter->stats.gotc += er32(GOTCL);
- er32(GOTCH); /* Clear gotc */
- adapter->stats.rnbc += er32(RNBC);
- adapter->stats.ruc += er32(RUC);
-
- adapter->stats.mptc += er32(MPTC);
- adapter->stats.bptc += er32(BPTC);
-
- /* used for adaptive IFS */
-
- hw->mac.tx_packet_delta = er32(TPT);
- adapter->stats.tpt += hw->mac.tx_packet_delta;
-
- adapter->stats.algnerrc += er32(ALGNERRC);
- adapter->stats.rxerrc += er32(RXERRC);
- adapter->stats.cexterr += er32(CEXTERR);
- adapter->stats.tsctc += er32(TSCTC);
- adapter->stats.tsctfc += er32(TSCTFC);
-
- /* Fill out the OS statistics structure */
- netdev->stats.multicast = adapter->stats.mprc;
- netdev->stats.collisions = adapter->stats.colc;
-
- /* Rx Errors */
-
- /*
- * RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC
- */
- netdev->stats.rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- netdev->stats.rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
- netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
- netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
- netdev->stats.rx_missed_errors = adapter->stats.mpc;
-
- /* Tx Errors */
- netdev->stats.tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
- netdev->stats.tx_aborted_errors = adapter->stats.ecol;
- netdev->stats.tx_window_errors = adapter->stats.latecol;
- netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
-
- /* Tx Dropped needs to be maintained elsewhere */
-
- /* Management Stats */
- adapter->stats.mgptc += er32(MGTPTC);
- adapter->stats.mgprc += er32(MGTPRC);
- adapter->stats.mgpdc += er32(MGTPDC);
-}
-
-/**
- * e1000_phy_read_status - Update the PHY register status snapshot
- * @adapter: board private structure
- **/
-static void e1000_phy_read_status(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_phy_regs *phy = &adapter->phy_regs;
-
- if ((er32(STATUS) & E1000_STATUS_LU) &&
- (adapter->hw.phy.media_type == e1000_media_type_copper)) {
- int ret_val;
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
- ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
- ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
- ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
- ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
- ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
- ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
- ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
- if (ret_val)
- e_warn("Error reading PHY register\n");
- } else {
- /*
- * Do not read PHY registers if link is not up
- * Set values to typical power-on defaults
- */
- phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
- phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
- BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
- BMSR_ERCAP);
- phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
- ADVERTISE_ALL | ADVERTISE_CSMA);
- phy->lpa = 0;
- phy->expansion = EXPANSION_ENABLENPAGE;
- phy->ctrl1000 = ADVERTISE_1000FULL;
- phy->stat1000 = 0;
- phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
- }
-}
-
-static void e1000_print_link_info(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl = er32(CTRL);
-
- /* Link status message must follow this format for user tools */
- printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- adapter->netdev->name,
- adapter->link_speed,
- (adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
- "Rx/Tx" :
- ((ctrl & E1000_CTRL_RFCE) ? "Rx" :
- ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
-}
-
-static bool e1000e_has_link(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- bool link_active = 0;
- s32 ret_val = 0;
-
- /*
- * get_link_status is set on LSC (link status) interrupt or
- * Rx sequence error interrupt. get_link_status will stay
- * false until the check_for_link establishes link
- * for copper adapters ONLY
- */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- if (hw->mac.get_link_status) {
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !hw->mac.get_link_status;
- } else {
- link_active = 1;
- }
- break;
- case e1000_media_type_fiber:
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !!(er32(STATUS) & E1000_STATUS_LU);
- break;
- case e1000_media_type_internal_serdes:
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = adapter->hw.mac.serdes_has_link;
- break;
- default:
- case e1000_media_type_unknown:
- break;
- }
-
- if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
- (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
- /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
- e_info("Gigabit has been disabled, downgrading speed\n");
- }
-
- return link_active;
-}
-
-static void e1000e_enable_receives(struct e1000_adapter *adapter)
-{
- /* make sure the receive unit is started */
- if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
- (adapter->flags & FLAG_RX_RESTART_NOW)) {
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl = er32(RCTL);
- ew32(RCTL, rctl | E1000_RCTL_EN);
- adapter->flags &= ~FLAG_RX_RESTART_NOW;
- }
-}
-
-static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /*
- * With 82574 controllers, PHY needs to be checked periodically
- * for hung state and reset, if two calls return true
- */
- if (e1000_check_phy_82574(hw))
- adapter->phy_hang_count++;
- else
- adapter->phy_hang_count = 0;
-
- if (adapter->phy_hang_count > 1) {
- adapter->phy_hang_count = 0;
- schedule_work(&adapter->reset_task);
- }
-}
-
-/**
- * e1000_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void e1000_watchdog(unsigned long data)
-{
- struct e1000_adapter *adapter = (struct e1000_adapter *) data;
-
- /* Do the rest outside of interrupt context */
- schedule_work(&adapter->watchdog_task);
-
- /* TODO: make this use queue_delayed_work() */
-}
-
-static void e1000_watchdog_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter = container_of(work,
- struct e1000_adapter, watchdog_task);
- struct net_device *netdev = adapter->netdev;
- struct e1000_mac_info *mac = &adapter->hw.mac;
- struct e1000_phy_info *phy = &adapter->hw.phy;
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_hw *hw = &adapter->hw;
- u32 link, tctl;
-
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- link = e1000e_has_link(adapter);
- if ((netif_carrier_ok(netdev)) && link) {
- /* Cancel scheduled suspend requests. */
- pm_runtime_resume(netdev->dev.parent);
-
- e1000e_enable_receives(adapter);
- goto link_up;
- }
-
- if ((e1000e_enable_tx_pkt_filtering(hw)) &&
- (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
- e1000_update_mng_vlan(adapter);
-
- if (link) {
- if (!netif_carrier_ok(netdev)) {
- bool txb2b = 1;
-
- /* Cancel scheduled suspend requests. */
- pm_runtime_resume(netdev->dev.parent);
-
- /* update snapshot of PHY registers on LSC */
- e1000_phy_read_status(adapter);
- mac->ops.get_link_up_info(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
- e1000_print_link_info(adapter);
- /*
- * On supported PHYs, check for duplex mismatch only
- * if link has autonegotiated at 10/100 half
- */
- if ((hw->phy.type == e1000_phy_igp_3 ||
- hw->phy.type == e1000_phy_bm) &&
- (hw->mac.autoneg == true) &&
- (adapter->link_speed == SPEED_10 ||
- adapter->link_speed == SPEED_100) &&
- (adapter->link_duplex == HALF_DUPLEX)) {
- u16 autoneg_exp;
-
- e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
-
- if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
- e_info("Autonegotiated half duplex but"
- " link partner cannot autoneg. "
- " Try forcing full duplex if "
- "link gets many collisions.\n");
- }
-
- /* adjust timeout factor according to speed/duplex */
- adapter->tx_timeout_factor = 1;
- switch (adapter->link_speed) {
- case SPEED_10:
- txb2b = 0;
- adapter->tx_timeout_factor = 16;
- break;
- case SPEED_100:
- txb2b = 0;
- adapter->tx_timeout_factor = 10;
- break;
- }
-
- /*
- * workaround: re-program speed mode bit after
- * link-up event
- */
- if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
- !txb2b) {
- u32 tarc0;
- tarc0 = er32(TARC(0));
- tarc0 &= ~SPEED_MODE_BIT;
- ew32(TARC(0), tarc0);
- }
-
- /*
- * disable TSO for pcie and 10/100 speeds, to avoid
- * some hardware issues
- */
- if (!(adapter->flags & FLAG_TSO_FORCE)) {
- switch (adapter->link_speed) {
- case SPEED_10:
- case SPEED_100:
- e_info("10/100 speed: disabling TSO\n");
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- break;
- case SPEED_1000:
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- break;
- default:
- /* oops */
- break;
- }
- }
-
- /*
- * enable transmits in the hardware, need to do this
- * after setting TARC(0)
- */
- tctl = er32(TCTL);
- tctl |= E1000_TCTL_EN;
- ew32(TCTL, tctl);
-
- /*
- * Perform any post-link-up configuration before
- * reporting link up.
- */
- if (phy->ops.cfg_on_link_up)
- phy->ops.cfg_on_link_up(hw);
-
- netif_carrier_on(netdev);
-
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- /* Link status message must follow this format */
- printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
- adapter->netdev->name);
- netif_carrier_off(netdev);
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
-
- if (adapter->flags & FLAG_RX_NEEDS_RESTART)
- schedule_work(&adapter->reset_task);
- else
- pm_schedule_suspend(netdev->dev.parent,
- LINK_TIMEOUT);
- }
- }
-
-link_up:
- spin_lock(&adapter->stats64_lock);
- e1000e_update_stats(adapter);
-
- mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
- adapter->tpt_old = adapter->stats.tpt;
- mac->collision_delta = adapter->stats.colc - adapter->colc_old;
- adapter->colc_old = adapter->stats.colc;
-
- adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
- adapter->gorc_old = adapter->stats.gorc;
- adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
- adapter->gotc_old = adapter->stats.gotc;
- spin_unlock(&adapter->stats64_lock);
-
- e1000e_update_adaptive(&adapter->hw);
-
- if (!netif_carrier_ok(netdev) &&
- (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) {
- /*
- * We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context).
- */
- schedule_work(&adapter->reset_task);
- /* return immediately since reset is imminent */
- return;
- }
-
- /* Simple mode for Interrupt Throttle Rate (ITR) */
- if (adapter->itr_setting == 4) {
- /*
- * Symmetric Tx/Rx gets a reduced ITR=2000;
- * Total asymmetrical Tx or Rx gets ITR=8000;
- * everyone else is between 2000-8000.
- */
- u32 goc = (adapter->gotc + adapter->gorc) / 10000;
- u32 dif = (adapter->gotc > adapter->gorc ?
- adapter->gotc - adapter->gorc :
- adapter->gorc - adapter->gotc) / 10000;
- u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
-
- ew32(ITR, 1000000000 / (itr * 256));
- }
-
- /* Cause software interrupt to ensure Rx ring is cleaned */
- if (adapter->msix_entries)
- ew32(ICS, adapter->rx_ring->ims_val);
- else
- ew32(ICS, E1000_ICS_RXDMT0);
-
- /* flush pending descriptors to memory before detecting Tx hang */
- e1000e_flush_descriptors(adapter);
-
- /* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = 1;
-
- /*
- * With 82571 controllers, LAA may be overwritten due to controller
- * reset from the other port. Set the appropriate LAA in RAR[0]
- */
- if (e1000e_get_laa_state_82571(hw))
- e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
-
- if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
- e1000e_check_82574_phy_workaround(adapter);
-
- /* Reset the timer */
- if (!test_bit(__E1000_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 2 * HZ));
-}
-
-#define E1000_TX_FLAGS_CSUM 0x00000001
-#define E1000_TX_FLAGS_VLAN 0x00000002
-#define E1000_TX_FLAGS_TSO 0x00000004
-#define E1000_TX_FLAGS_IPV4 0x00000008
-#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
-#define E1000_TX_FLAGS_VLAN_SHIFT 16
-
-static int e1000_tso(struct e1000_adapter *adapter,
- struct sk_buff *skb)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_context_desc *context_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i;
- u32 cmd_length = 0;
- u16 ipcse = 0, tucse, mss;
- u8 ipcss, ipcso, tucss, tucso, hdr_len;
-
- if (!skb_is_gso(skb))
- return 0;
-
- if (skb_header_cloned(skb)) {
- int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
-
- if (err)
- return err;
- }
-
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- mss = skb_shinfo(skb)->gso_size;
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
- 0, IPPROTO_TCP, 0);
- cmd_length = E1000_TXD_CMD_IP;
- ipcse = skb_transport_offset(skb) - 1;
- } else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- ipcse = 0;
- }
- ipcss = skb_network_offset(skb);
- ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
- tucss = skb_transport_offset(skb);
- tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- tucse = 0;
-
- cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
- E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
-
- i = tx_ring->next_to_use;
- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
-
- context_desc->lower_setup.ip_fields.ipcss = ipcss;
- context_desc->lower_setup.ip_fields.ipcso = ipcso;
- context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
- context_desc->upper_setup.tcp_fields.tucss = tucss;
- context_desc->upper_setup.tcp_fields.tucso = tucso;
- context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
- context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
- context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
- context_desc->cmd_and_length = cpu_to_le32(cmd_length);
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return 1;
-}
-
-static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_context_desc *context_desc;
- struct e1000_buffer *buffer_info;
- unsigned int i;
- u8 css;
- u32 cmd_len = E1000_TXD_CMD_DEXT;
- __be16 protocol;
-
- if (skb->ip_summed != CHECKSUM_PARTIAL)
- return 0;
-
- if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
- protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
- else
- protocol = skb->protocol;
-
- switch (protocol) {
- case cpu_to_be16(ETH_P_IP):
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- cmd_len |= E1000_TXD_CMD_TCP;
- break;
- case cpu_to_be16(ETH_P_IPV6):
- /* XXX not handling all IPV6 headers */
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- cmd_len |= E1000_TXD_CMD_TCP;
- break;
- default:
- if (unlikely(net_ratelimit()))
- e_warn("checksum_partial proto=%x!\n",
- be16_to_cpu(protocol));
- break;
- }
-
- css = skb_checksum_start_offset(skb);
-
- i = tx_ring->next_to_use;
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
-
- context_desc->lower_setup.ip_config = 0;
- context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso =
- css + skb->csum_offset;
- context_desc->upper_setup.tcp_fields.tucse = 0;
- context_desc->tcp_seg_setup.data = 0;
- context_desc->cmd_and_length = cpu_to_le32(cmd_len);
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return 1;
-}
-
-#define E1000_MAX_PER_TXD 8192
-#define E1000_MAX_TXD_PWR 12
-
-static int e1000_tx_map(struct e1000_adapter *adapter,
- struct sk_buff *skb, unsigned int first,
- unsigned int max_per_txd, unsigned int nr_frags,
- unsigned int mss)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_buffer *buffer_info;
- unsigned int len = skb_headlen(skb);
- unsigned int offset = 0, size, count = 0, i;
- unsigned int f, bytecount, segs;
-
- i = tx_ring->next_to_use;
-
- while (len) {
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, max_per_txd);
-
- buffer_info->length = size;
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- buffer_info->mapped_as_page = false;
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
-
- len -= size;
- offset += size;
- count++;
-
- if (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = frag->page_offset;
-
- while (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, max_per_txd);
-
- buffer_info->length = size;
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
- offset, size,
- DMA_TO_DEVICE);
- buffer_info->mapped_as_page = true;
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
-
- len -= size;
- offset += size;
- count++;
- }
- }
-
- segs = skb_shinfo(skb)->gso_segs ? : 1;
- /* multiply data chunks by size of headers */
- bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
-
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[i].segs = segs;
- tx_ring->buffer_info[i].bytecount = bytecount;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- dev_err(&pdev->dev, "Tx DMA map failed\n");
- buffer_info->dma = 0;
- if (count)
- count--;
-
- while (count--) {
- if (i == 0)
- i += tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- e1000_put_txbuf(adapter, buffer_info);
- }
-
- return 0;
-}
-
-static void e1000_tx_queue(struct e1000_adapter *adapter,
- int tx_flags, int count)
-{
- struct e1000_ring *tx_ring = adapter->tx_ring;
- struct e1000_tx_desc *tx_desc = NULL;
- struct e1000_buffer *buffer_info;
- u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
- unsigned int i;
-
- if (tx_flags & E1000_TX_FLAGS_TSO) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
- E1000_TXD_CMD_TSE;
- txd_upper |= E1000_TXD_POPTS_TXSM << 8;
-
- if (tx_flags & E1000_TX_FLAGS_IPV4)
- txd_upper |= E1000_TXD_POPTS_IXSM << 8;
- }
-
- if (tx_flags & E1000_TX_FLAGS_CSUM) {
- txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
- txd_upper |= E1000_TXD_POPTS_TXSM << 8;
- }
-
- if (tx_flags & E1000_TX_FLAGS_VLAN) {
- txd_lower |= E1000_TXD_CMD_VLE;
- txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
- }
-
- i = tx_ring->next_to_use;
-
- do {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = E1000_TX_DESC(*tx_ring, i);
- tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->lower.data =
- cpu_to_le32(txd_lower | buffer_info->length);
- tx_desc->upper.data = cpu_to_le32(txd_upper);
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- } while (--count > 0);
-
- tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
-
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
- /*
- * we need this if more than one processor can write to our tail
- * at a time, it synchronizes IO on IA64/Altix systems
- */
- mmiowb();
-}
-
-#define MINIMUM_DHCP_PACKET_SIZE 282
-static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
- struct sk_buff *skb)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 length, offset;
-
- if (vlan_tx_tag_present(skb)) {
- if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
- (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
- return 0;
- }
-
- if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
- return 0;
-
- if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
- return 0;
-
- {
- const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
- struct udphdr *udp;
-
- if (ip->protocol != IPPROTO_UDP)
- return 0;
-
- udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
- if (ntohs(udp->dest) != 67)
- return 0;
-
- offset = (u8 *)udp + 8 - skb->data;
- length = skb->len - offset;
- return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
- }
-
- return 0;
-}
-
-static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- netif_stop_queue(netdev);
- /*
- * Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it.
- */
- smp_mb();
-
- /*
- * We need to check again in a case another CPU has just
- * made room available.
- */
- if (e1000_desc_unused(adapter->tx_ring) < size)
- return -EBUSY;
-
- /* A reprieve! */
- netif_start_queue(netdev);
- ++adapter->restart_queue;
- return 0;
-}
-
-static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (e1000_desc_unused(adapter->tx_ring) >= size)
- return 0;
- return __e1000_maybe_stop_tx(netdev, size);
-}
-
-#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
-static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_ring *tx_ring = adapter->tx_ring;
- unsigned int first;
- unsigned int max_per_txd = E1000_MAX_PER_TXD;
- unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
- unsigned int tx_flags = 0;
- unsigned int len = skb_headlen(skb);
- unsigned int nr_frags;
- unsigned int mss;
- int count = 0;
- int tso;
- unsigned int f;
-
- if (test_bit(__E1000_DOWN, &adapter->state)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->len <= 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- mss = skb_shinfo(skb)->gso_size;
- /*
- * The controller does a simple calculation to
- * make sure there is enough room in the FIFO before
- * initiating the DMA for each buffer. The calc is:
- * 4 = ceil(buffer len/mss). To make sure we don't
- * overrun the FIFO, adjust the max buffer len if mss
- * drops.
- */
- if (mss) {
- u8 hdr_len;
- max_per_txd = min(mss << 2, max_per_txd);
- max_txd_pwr = fls(max_per_txd) - 1;
-
- /*
- * TSO Workaround for 82571/2/3 Controllers -- if skb->data
- * points to just header, pull a few bytes of payload from
- * frags into skb->data
- */
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- /*
- * we do this workaround for ES2LAN, but it is un-necessary,
- * avoiding it could save a lot of cycles
- */
- if (skb->data_len && (hdr_len == len)) {
- unsigned int pull_size;
-
- pull_size = min((unsigned int)4, skb->data_len);
- if (!__pskb_pull_tail(skb, pull_size)) {
- e_err("__pskb_pull_tail failed.\n");
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
- len = skb_headlen(skb);
- }
- }
-
- /* reserve a descriptor for the offload context */
- if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
- count++;
- count++;
-
- count += TXD_USE_COUNT(len, max_txd_pwr);
-
- nr_frags = skb_shinfo(skb)->nr_frags;
- for (f = 0; f < nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
- max_txd_pwr);
-
- if (adapter->hw.mac.tx_pkt_filtering)
- e1000_transfer_dhcp_info(adapter, skb);
-
- /*
- * need: count + 2 desc gap to keep tail from touching
- * head, otherwise try next time
- */
- if (e1000_maybe_stop_tx(netdev, count + 2))
- return NETDEV_TX_BUSY;
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= E1000_TX_FLAGS_VLAN;
- tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
- }
-
- first = tx_ring->next_to_use;
-
- tso = e1000_tso(adapter, skb);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (tso)
- tx_flags |= E1000_TX_FLAGS_TSO;
- else if (e1000_tx_csum(adapter, skb))
- tx_flags |= E1000_TX_FLAGS_CSUM;
-
- /*
- * Old method was to assume IPv4 packet by default if TSO was enabled.
- * 82571 hardware supports TSO capabilities for IPv6 as well...
- * no longer assume, we must.
- */
- if (skb->protocol == htons(ETH_P_IP))
- tx_flags |= E1000_TX_FLAGS_IPV4;
-
- /* if count is 0 then mapping error has occurred */
- count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
- if (count) {
- e1000_tx_queue(adapter, tx_flags, count);
- /* Make sure there is space in the ring for the next send. */
- e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
-
- } else {
- dev_kfree_skb_any(skb);
- tx_ring->buffer_info[first].time_stamp = 0;
- tx_ring->next_to_use = first;
- }
-
- return NETDEV_TX_OK;
-}
-
-/**
- * e1000_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-static void e1000_tx_timeout(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
-}
-
-static void e1000_reset_task(struct work_struct *work)
-{
- struct e1000_adapter *adapter;
- adapter = container_of(work, struct e1000_adapter, reset_task);
-
- /* don't run the task if already down */
- if (test_bit(__E1000_DOWN, &adapter->state))
- return;
-
- if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
- (adapter->flags & FLAG_RX_RESTART_NOW))) {
- e1000e_dump(adapter);
- e_err("Reset adapter\n");
- }
- e1000e_reinit_locked(adapter);
-}
-
-/**
- * e1000_get_stats64 - Get System Network Statistics
- * @netdev: network interface device structure
- * @stats: rtnl_link_stats64 pointer
- *
- * Returns the address of the device statistics structure.
- **/
-struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *stats)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- memset(stats, 0, sizeof(struct rtnl_link_stats64));
- spin_lock(&adapter->stats64_lock);
- e1000e_update_stats(adapter);
- /* Fill out the OS statistics structure */
- stats->rx_bytes = adapter->stats.gorc;
- stats->rx_packets = adapter->stats.gprc;
- stats->tx_bytes = adapter->stats.gotc;
- stats->tx_packets = adapter->stats.gptc;
- stats->multicast = adapter->stats.mprc;
- stats->collisions = adapter->stats.colc;
-
- /* Rx Errors */
-
- /*
- * RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC
- */
- stats->rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- stats->rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
- stats->rx_crc_errors = adapter->stats.crcerrs;
- stats->rx_frame_errors = adapter->stats.algnerrc;
- stats->rx_missed_errors = adapter->stats.mpc;
-
- /* Tx Errors */
- stats->tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
- stats->tx_aborted_errors = adapter->stats.ecol;
- stats->tx_window_errors = adapter->stats.latecol;
- stats->tx_carrier_errors = adapter->stats.tncrs;
-
- /* Tx Dropped needs to be maintained elsewhere */
-
- spin_unlock(&adapter->stats64_lock);
- return stats;
-}
-
-/**
- * e1000_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
-
- /* Jumbo frame support */
- if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
- !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
- e_err("Jumbo Frames not supported.\n");
- return -EINVAL;
- }
-
- /* Supported frame sizes */
- if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
- (max_frame > adapter->max_hw_frame_size)) {
- e_err("Unsupported MTU setting\n");
- return -EINVAL;
- }
-
- /* Jumbo frame workaround on 82579 requires CRC be stripped */
- if ((adapter->hw.mac.type == e1000_pch2lan) &&
- !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
- (new_mtu > ETH_DATA_LEN)) {
- e_err("Jumbo Frames not supported on 82579 when CRC "
- "stripping is disabled.\n");
- return -EINVAL;
- }
-
- /* 82573 Errata 17 */
- if (((adapter->hw.mac.type == e1000_82573) ||
- (adapter->hw.mac.type == e1000_82574)) &&
- (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
- adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
- e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
- }
-
- while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
- /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
- adapter->max_frame_size = max_frame;
- e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
- if (netif_running(netdev))
- e1000e_down(adapter);
-
- /*
- * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- * However with the new *_jumbo_rx* routines, jumbo receives will use
- * fragmented skbs
- */
-
- if (max_frame <= 2048)
- adapter->rx_buffer_len = 2048;
- else
- adapter->rx_buffer_len = 4096;
-
- /* adjust allocation if LPE protects us, and we aren't using SBP */
- if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
- + ETH_FCS_LEN;
-
- if (netif_running(netdev))
- e1000e_up(adapter);
- else
- e1000e_reset(adapter);
-
- clear_bit(__E1000_RESETTING, &adapter->state);
-
- return 0;
-}
-
-static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
- int cmd)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct mii_ioctl_data *data = if_mii(ifr);
-
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = adapter->hw.phy.addr;
- break;
- case SIOCGMIIREG:
- e1000_phy_read_status(adapter);
-
- switch (data->reg_num & 0x1F) {
- case MII_BMCR:
- data->val_out = adapter->phy_regs.bmcr;
- break;
- case MII_BMSR:
- data->val_out = adapter->phy_regs.bmsr;
- break;
- case MII_PHYSID1:
- data->val_out = (adapter->hw.phy.id >> 16);
- break;
- case MII_PHYSID2:
- data->val_out = (adapter->hw.phy.id & 0xFFFF);
- break;
- case MII_ADVERTISE:
- data->val_out = adapter->phy_regs.advertise;
- break;
- case MII_LPA:
- data->val_out = adapter->phy_regs.lpa;
- break;
- case MII_EXPANSION:
- data->val_out = adapter->phy_regs.expansion;
- break;
- case MII_CTRL1000:
- data->val_out = adapter->phy_regs.ctrl1000;
- break;
- case MII_STAT1000:
- data->val_out = adapter->phy_regs.stat1000;
- break;
- case MII_ESTATUS:
- data->val_out = adapter->phy_regs.estatus;
- break;
- default:
- return -EIO;
- }
- break;
- case SIOCSMIIREG:
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- return e1000_mii_ioctl(netdev, ifr, cmd);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 i, mac_reg;
- u16 phy_reg, wuc_enable;
- int retval = 0;
-
- /* copy MAC RARs to PHY RARs */
- e1000_copy_rx_addrs_to_phy_ich8lan(hw);
-
- retval = hw->phy.ops.acquire(hw);
- if (retval) {
- e_err("Could not acquire PHY\n");
- return retval;
- }
-
- /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
- retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
- if (retval)
- goto out;
-
- /* copy MAC MTA to PHY MTA - only needed for pchlan */
- for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
- mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
- hw->phy.ops.write_reg_page(hw, BM_MTA(i),
- (u16)(mac_reg & 0xFFFF));
- hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
- (u16)((mac_reg >> 16) & 0xFFFF));
- }
-
- /* configure PHY Rx Control register */
- hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
- mac_reg = er32(RCTL);
- if (mac_reg & E1000_RCTL_UPE)
- phy_reg |= BM_RCTL_UPE;
- if (mac_reg & E1000_RCTL_MPE)
- phy_reg |= BM_RCTL_MPE;
- phy_reg &= ~(BM_RCTL_MO_MASK);
- if (mac_reg & E1000_RCTL_MO_3)
- phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
- << BM_RCTL_MO_SHIFT);
- if (mac_reg & E1000_RCTL_BAM)
- phy_reg |= BM_RCTL_BAM;
- if (mac_reg & E1000_RCTL_PMCF)
- phy_reg |= BM_RCTL_PMCF;
- mac_reg = er32(CTRL);
- if (mac_reg & E1000_CTRL_RFCE)
- phy_reg |= BM_RCTL_RFCE;
- hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
-
- /* enable PHY wakeup in MAC register */
- ew32(WUFC, wufc);
- ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
-
- /* configure and enable PHY wakeup in PHY registers */
- hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
- hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
-
- /* activate PHY wakeup */
- wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
- retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
- if (retval)
- e_err("Could not set PHY Host Wakeup bit\n");
-out:
- hw->phy.ops.release(hw);
-
- return retval;
-}
-
-static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
- bool runtime)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, ctrl_ext, rctl, status;
- /* Runtime suspend should only enable wakeup for link changes */
- u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
- int retval = 0;
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev)) {
- WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
- e1000e_down(adapter);
- e1000_free_irq(adapter);
- }
- e1000e_reset_interrupt_capability(adapter);
-
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
- status = er32(STATUS);
- if (status & E1000_STATUS_LU)
- wufc &= ~E1000_WUFC_LNKC;
-
- if (wufc) {
- e1000_setup_rctl(adapter);
- e1000_set_multi(netdev);
-
- /* turn on all-multi mode if wake on multicast is enabled */
- if (wufc & E1000_WUFC_MC) {
- rctl = er32(RCTL);
- rctl |= E1000_RCTL_MPE;
- ew32(RCTL, rctl);
- }
-
- ctrl = er32(CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
- ctrl |= E1000_CTRL_ADVD3WUC;
- if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
- ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
- ew32(CTRL, ctrl);
-
- if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
- adapter->hw.phy.media_type ==
- e1000_media_type_internal_serdes) {
- /* keep the laser running in D3 */
- ctrl_ext = er32(CTRL_EXT);
- ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
- ew32(CTRL_EXT, ctrl_ext);
- }
-
- if (adapter->flags & FLAG_IS_ICH)
- e1000_suspend_workarounds_ich8lan(&adapter->hw);
-
- /* Allow time for pending master requests to run */
- e1000e_disable_pcie_master(&adapter->hw);
-
- if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
- /* enable wakeup by the PHY */
- retval = e1000_init_phy_wakeup(adapter, wufc);
- if (retval)
- return retval;
- } else {
- /* enable wakeup by the MAC */
- ew32(WUFC, wufc);
- ew32(WUC, E1000_WUC_PME_EN);
- }
- } else {
- ew32(WUC, 0);
- ew32(WUFC, 0);
- }
-
- *enable_wake = !!wufc;
-
- /* make sure adapter isn't asleep if manageability is enabled */
- if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
- (hw->mac.ops.check_mng_mode(hw)))
- *enable_wake = true;
-
- if (adapter->hw.phy.type == e1000_phy_igp_3)
- e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
-
- /*
- * Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant.
- */
- e1000e_release_hw_control(adapter);
-
- pci_disable_device(pdev);
-
- return 0;
-}
-
-static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
-{
- if (sleep && wake) {
- pci_prepare_to_sleep(pdev);
- return;
- }
-
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
-}
-
-static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
- bool wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- /*
- * The pci-e switch on some quad port adapters will report a
- * correctable error when the MAC transitions from D0 to D3. To
- * prevent this we need to mask off the correctable errors on the
- * downstream port of the pci-e switch.
- */
- if (adapter->flags & FLAG_IS_QUAD_PORT) {
- struct pci_dev *us_dev = pdev->bus->self;
- int pos = pci_pcie_cap(us_dev);
- u16 devctl;
-
- pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
- pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
- (devctl & ~PCI_EXP_DEVCTL_CERE));
-
- e1000_power_off(pdev, sleep, wake);
-
- pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
- } else {
- e1000_power_off(pdev, sleep, wake);
- }
-}
-
-#ifdef CONFIG_PCIEASPM
-static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
-{
- pci_disable_link_state_locked(pdev, state);
-}
-#else
-static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
-{
- int pos;
- u16 reg16;
-
- /*
- * Both device and parent should have the same ASPM setting.
- * Disable ASPM in downstream component first and then upstream.
- */
- pos = pci_pcie_cap(pdev);
- pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
- reg16 &= ~state;
- pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
-
- if (!pdev->bus->self)
- return;
-
- pos = pci_pcie_cap(pdev->bus->self);
- pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16);
- reg16 &= ~state;
- pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
-}
-#endif
-static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
-{
- dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
- (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
- (state & PCIE_LINK_STATE_L1) ? "L1" : "");
-
- __e1000e_disable_aspm(pdev, state);
-}
-
-#ifdef CONFIG_PM
-static bool e1000e_pm_ready(struct e1000_adapter *adapter)
-{
- return !!adapter->tx_ring->buffer_info;
-}
-
-static int __e1000_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 aspm_disable_flag = 0;
- u32 err;
-
- if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
- aspm_disable_flag = PCIE_LINK_STATE_L0S;
- if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
- aspm_disable_flag |= PCIE_LINK_STATE_L1;
- if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
-
- e1000e_set_interrupt_capability(adapter);
- if (netif_running(netdev)) {
- err = e1000_request_irq(adapter);
- if (err)
- return err;
- }
-
- if (hw->mac.type == e1000_pch2lan)
- e1000_resume_workarounds_pchlan(&adapter->hw);
-
- e1000e_power_up_phy(adapter);
-
- /* report the system wakeup cause from S3/S4 */
- if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
- u16 phy_data;
-
- e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
- if (phy_data) {
- e_info("PHY Wakeup cause - %s\n",
- phy_data & E1000_WUS_EX ? "Unicast Packet" :
- phy_data & E1000_WUS_MC ? "Multicast Packet" :
- phy_data & E1000_WUS_BC ? "Broadcast Packet" :
- phy_data & E1000_WUS_MAG ? "Magic Packet" :
- phy_data & E1000_WUS_LNKC ? "Link Status "
- " Change" : "other");
- }
- e1e_wphy(&adapter->hw, BM_WUS, ~0);
- } else {
- u32 wus = er32(WUS);
- if (wus) {
- e_info("MAC Wakeup cause - %s\n",
- wus & E1000_WUS_EX ? "Unicast Packet" :
- wus & E1000_WUS_MC ? "Multicast Packet" :
- wus & E1000_WUS_BC ? "Broadcast Packet" :
- wus & E1000_WUS_MAG ? "Magic Packet" :
- wus & E1000_WUS_LNKC ? "Link Status Change" :
- "other");
- }
- ew32(WUS, ~0);
- }
-
- e1000e_reset(adapter);
-
- e1000_init_manageability_pt(adapter);
-
- if (netif_running(netdev))
- e1000e_up(adapter);
-
- netif_device_attach(netdev);
-
- /*
- * If the controller has AMT, do not set DRV_LOAD until the interface
- * is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver.
- */
- if (!(adapter->flags & FLAG_HAS_AMT))
- e1000e_get_hw_control(adapter);
-
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int e1000_suspend(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- int retval;
- bool wake;
-
- retval = __e1000_shutdown(pdev, &wake, false);
- if (!retval)
- e1000_complete_shutdown(pdev, true, wake);
-
- return retval;
-}
-
-static int e1000_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (e1000e_pm_ready(adapter))
- adapter->idle_check = true;
-
- return __e1000_resume(pdev);
-}
-#endif /* CONFIG_PM_SLEEP */
-
-#ifdef CONFIG_PM_RUNTIME
-static int e1000_runtime_suspend(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (e1000e_pm_ready(adapter)) {
- bool wake;
-
- __e1000_shutdown(pdev, &wake, true);
- }
-
- return 0;
-}
-
-static int e1000_idle(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (!e1000e_pm_ready(adapter))
- return 0;
-
- if (adapter->idle_check) {
- adapter->idle_check = false;
- if (!e1000e_has_link(adapter))
- pm_schedule_suspend(dev, MSEC_PER_SEC);
- }
-
- return -EBUSY;
-}
-
-static int e1000_runtime_resume(struct device *dev)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (!e1000e_pm_ready(adapter))
- return 0;
-
- adapter->idle_check = !dev->power.runtime_auto;
- return __e1000_resume(pdev);
-}
-#endif /* CONFIG_PM_RUNTIME */
-#endif /* CONFIG_PM */
-
-static void e1000_shutdown(struct pci_dev *pdev)
-{
- bool wake = false;
-
- __e1000_shutdown(pdev, &wake, false);
-
- if (system_state == SYSTEM_POWER_OFF)
- e1000_complete_shutdown(pdev, false, wake);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-
-static irqreturn_t e1000_intr_msix(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->msix_entries) {
- int vector, msix_irq;
-
- vector = 0;
- msix_irq = adapter->msix_entries[vector].vector;
- disable_irq(msix_irq);
- e1000_intr_msix_rx(msix_irq, netdev);
- enable_irq(msix_irq);
-
- vector++;
- msix_irq = adapter->msix_entries[vector].vector;
- disable_irq(msix_irq);
- e1000_intr_msix_tx(msix_irq, netdev);
- enable_irq(msix_irq);
-
- vector++;
- msix_irq = adapter->msix_entries[vector].vector;
- disable_irq(msix_irq);
- e1000_msix_other(msix_irq, netdev);
- enable_irq(msix_irq);
- }
-
- return IRQ_HANDLED;
-}
-
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void e1000_netpoll(struct net_device *netdev)
-{
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- switch (adapter->int_mode) {
- case E1000E_INT_MODE_MSIX:
- e1000_intr_msix(adapter->pdev->irq, netdev);
- break;
- case E1000E_INT_MODE_MSI:
- disable_irq(adapter->pdev->irq);
- e1000_intr_msi(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
- break;
- default: /* E1000E_INT_MODE_LEGACY */
- disable_irq(adapter->pdev->irq);
- e1000_intr(adapter->pdev->irq, netdev);
- enable_irq(adapter->pdev->irq);
- break;
- }
-}
-#endif
-
-/**
- * e1000_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- e1000e_down(adapter);
- pci_disable_device(pdev);
-
- /* Request a slot slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * e1000_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the e1000_resume routine.
- */
-static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 aspm_disable_flag = 0;
- int err;
- pci_ers_result_t result;
-
- if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
- aspm_disable_flag = PCIE_LINK_STATE_L0S;
- if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
- aspm_disable_flag |= PCIE_LINK_STATE_L1;
- if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
-
- err = pci_enable_device_mem(pdev);
- if (err) {
- dev_err(&pdev->dev,
- "Cannot re-enable PCI device after reset.\n");
- result = PCI_ERS_RESULT_DISCONNECT;
- } else {
- pci_set_master(pdev);
- pdev->state_saved = true;
- pci_restore_state(pdev);
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
- e1000e_reset(adapter);
- ew32(WUS, ~0);
- result = PCI_ERS_RESULT_RECOVERED;
- }
-
- pci_cleanup_aer_uncorrect_error_status(pdev);
-
- return result;
-}
-
-/**
- * e1000_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation. Implementation resembles the
- * second-half of the e1000_resume routine.
- */
-static void e1000_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
-
- e1000_init_manageability_pt(adapter);
-
- if (netif_running(netdev)) {
- if (e1000e_up(adapter)) {
- dev_err(&pdev->dev,
- "can't bring device back up after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
-
- /*
- * If the controller has AMT, do not set DRV_LOAD until the interface
- * is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver.
- */
- if (!(adapter->flags & FLAG_HAS_AMT))
- e1000e_get_hw_control(adapter);
-
-}
-
-static void e1000_print_device_info(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 ret_val;
- u8 pba_str[E1000_PBANUM_LENGTH];
-
- /* print bus type/speed/width info */
- e_info("(PCI Express:2.5GT/s:%s) %pM\n",
- /* bus width */
- ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- "Width x1"),
- /* MAC address */
- netdev->dev_addr);
- e_info("Intel(R) PRO/%s Network Connection\n",
- (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
- ret_val = e1000_read_pba_string_generic(hw, pba_str,
- E1000_PBANUM_LENGTH);
- if (ret_val)
- strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
- e_info("MAC: %d, PHY: %d, PBA No: %s\n",
- hw->mac.type, hw->phy.type, pba_str);
-}
-
-static void e1000_eeprom_checks(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- int ret_val;
- u16 buf = 0;
-
- if (hw->mac.type != e1000_82573)
- return;
-
- ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
- if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
- /* Deep Smart Power Down (DSPD) */
- dev_warn(&adapter->pdev->dev,
- "Warning: detected DSPD enabled in EEPROM\n");
- }
-}
-
-static const struct net_device_ops e1000e_netdev_ops = {
- .ndo_open = e1000_open,
- .ndo_stop = e1000_close,
- .ndo_start_xmit = e1000_xmit_frame,
- .ndo_get_stats64 = e1000e_get_stats64,
- .ndo_set_multicast_list = e1000_set_multi,
- .ndo_set_mac_address = e1000_set_mac,
- .ndo_change_mtu = e1000_change_mtu,
- .ndo_do_ioctl = e1000_ioctl,
- .ndo_tx_timeout = e1000_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
-
- .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = e1000_netpoll,
-#endif
-};
-
-/**
- * e1000_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in e1000_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * e1000_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit e1000_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct e1000_adapter *adapter;
- struct e1000_hw *hw;
- const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
- resource_size_t mmio_start, mmio_len;
- resource_size_t flash_start, flash_len;
-
- static int cards_found;
- u16 aspm_disable_flag = 0;
- int i, err, pci_using_dac;
- u16 eeprom_data = 0;
- u16 eeprom_apme_mask = E1000_EEPROM_APME;
-
- if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
- aspm_disable_flag = PCIE_LINK_STATE_L0S;
- if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
- aspm_disable_flag |= PCIE_LINK_STATE_L1;
- if (aspm_disable_flag)
- e1000e_disable_aspm(pdev, aspm_disable_flag);
-
- err = pci_enable_device_mem(pdev);
- if (err)
- return err;
-
- pci_using_dac = 0;
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err)
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
- DMA_BIT_MASK(32));
- if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
- goto err_dma;
- }
- }
- }
-
- err = pci_request_selected_regions_exclusive(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM),
- e1000e_driver_name);
- if (err)
- goto err_pci_reg;
-
- /* AER (Advanced Error Reporting) hooks */
- pci_enable_pcie_error_reporting(pdev);
-
- pci_set_master(pdev);
- /* PCI config space info */
- err = pci_save_state(pdev);
- if (err)
- goto err_alloc_etherdev;
-
- err = -ENOMEM;
- netdev = alloc_etherdev(sizeof(struct e1000_adapter));
- if (!netdev)
- goto err_alloc_etherdev;
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- netdev->irq = pdev->irq;
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- hw = &adapter->hw;
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- adapter->ei = ei;
- adapter->pba = ei->pba;
- adapter->flags = ei->flags;
- adapter->flags2 = ei->flags2;
- adapter->hw.adapter = adapter;
- adapter->hw.mac.type = ei->mac;
- adapter->max_hw_frame_size = ei->max_hw_frame_size;
- adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-
- mmio_start = pci_resource_start(pdev, 0);
- mmio_len = pci_resource_len(pdev, 0);
-
- err = -EIO;
- adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
- if (!adapter->hw.hw_addr)
- goto err_ioremap;
-
- if ((adapter->flags & FLAG_HAS_FLASH) &&
- (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
- flash_start = pci_resource_start(pdev, 1);
- flash_len = pci_resource_len(pdev, 1);
- adapter->hw.flash_address = ioremap(flash_start, flash_len);
- if (!adapter->hw.flash_address)
- goto err_flashmap;
- }
-
- /* construct the net_device struct */
- netdev->netdev_ops = &e1000e_netdev_ops;
- e1000e_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- netdev->mem_start = mmio_start;
- netdev->mem_end = mmio_start + mmio_len;
-
- adapter->bd_number = cards_found++;
-
- e1000e_check_options(adapter);
-
- /* setup adapter struct */
- err = e1000_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
- memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
- memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
-
- err = ei->get_variants(adapter);
- if (err)
- goto err_hw_init;
-
- if ((adapter->flags & FLAG_IS_ICH) &&
- (adapter->flags & FLAG_READ_ONLY_NVM))
- e1000e_write_protect_nvm_ich8lan(&adapter->hw);
-
- hw->mac.ops.get_bus_info(&adapter->hw);
-
- adapter->hw.phy.autoneg_wait_to_complete = 0;
-
- /* Copper options */
- if (adapter->hw.phy.media_type == e1000_media_type_copper) {
- adapter->hw.phy.mdix = AUTO_ALL_MODES;
- adapter->hw.phy.disable_polarity_correction = 0;
- adapter->hw.phy.ms_type = e1000_ms_hw_default;
- }
-
- if (e1000_check_reset_block(&adapter->hw))
- e_info("PHY reset is blocked due to SOL/IDER session.\n");
-
- netdev->features = NETIF_F_SG |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX;
-
- if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
- netdev->features |= NETIF_F_HW_VLAN_FILTER;
-
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
-
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
- netdev->vlan_features |= NETIF_F_HW_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- if (e1000e_enable_mng_pass_thru(&adapter->hw))
- adapter->flags |= FLAG_MNG_PT_ENABLED;
-
- /*
- * before reading the NVM, reset the controller to
- * put the device in a known good starting state
- */
- adapter->hw.mac.ops.reset_hw(&adapter->hw);
-
- /*
- * systems with ASPM and others may see the checksum fail on the first
- * attempt. Let's give it a few tries
- */
- for (i = 0;; i++) {
- if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
- break;
- if (i == 2) {
- e_err("The NVM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
- }
- }
-
- e1000_eeprom_checks(adapter);
-
- /* copy the MAC address */
- if (e1000e_read_mac_addr(&adapter->hw))
- e_err("NVM Read Error while reading MAC address\n");
-
- memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
- memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
- err = -EIO;
- goto err_eeprom;
- }
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = e1000_watchdog;
- adapter->watchdog_timer.data = (unsigned long) adapter;
-
- init_timer(&adapter->phy_info_timer);
- adapter->phy_info_timer.function = e1000_update_phy_info;
- adapter->phy_info_timer.data = (unsigned long) adapter;
-
- INIT_WORK(&adapter->reset_task, e1000_reset_task);
- INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
- INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
- INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
- INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
-
- /* Initialize link parameters. User can change them with ethtool */
- adapter->hw.mac.autoneg = 1;
- adapter->fc_autoneg = 1;
- adapter->hw.fc.requested_mode = e1000_fc_default;
- adapter->hw.fc.current_mode = e1000_fc_default;
- adapter->hw.phy.autoneg_advertised = 0x2f;
-
- /* ring size defaults */
- adapter->rx_ring->count = 256;
- adapter->tx_ring->count = 256;
-
- /*
- * Initial Wake on LAN setting - If APM wake is enabled in
- * the EEPROM, enable the ACPI Magic Packet filter
- */
- if (adapter->flags & FLAG_APME_IN_WUC) {
- /* APME bit in EEPROM is mapped to WUC.APME */
- eeprom_data = er32(WUC);
- eeprom_apme_mask = E1000_WUC_APME;
- if ((hw->mac.type > e1000_ich10lan) &&
- (eeprom_data & E1000_WUC_PHY_WAKE))
- adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
- } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
- if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
- (adapter->hw.bus.func == 1))
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
- else
- e1000_read_nvm(&adapter->hw,
- NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
- }
-
- /* fetch WoL from EEPROM */
- if (eeprom_data & eeprom_apme_mask)
- adapter->eeprom_wol |= E1000_WUFC_MAG;
-
- /*
- * now that we have the eeprom settings, apply the special cases
- * where the eeprom may be wrong or the board simply won't support
- * wake on lan on a particular port
- */
- if (!(adapter->flags & FLAG_HAS_WOL))
- adapter->eeprom_wol = 0;
-
- /* initialize the wol settings based on the eeprom settings */
- adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- /* save off EEPROM version number */
- e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
-
- /* reset the hardware with the new settings */
- e1000e_reset(adapter);
-
- /*
- * If the controller has AMT, do not set DRV_LOAD until the interface
- * is up. For all other cases, let the f/w know that the h/w is now
- * under the control of the driver.
- */
- if (!(adapter->flags & FLAG_HAS_AMT))
- e1000e_get_hw_control(adapter);
-
- strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
- e1000_print_device_info(adapter);
-
- if (pci_dev_run_wake(pdev))
- pm_runtime_put_noidle(&pdev->dev);
-
- return 0;
-
-err_register:
- if (!(adapter->flags & FLAG_HAS_AMT))
- e1000e_release_hw_control(adapter);
-err_eeprom:
- if (!e1000_check_reset_block(&adapter->hw))
- e1000_phy_hw_reset(&adapter->hw);
-err_hw_init:
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-err_sw_init:
- if (adapter->hw.flash_address)
- iounmap(adapter->hw.flash_address);
- e1000e_reset_interrupt_capability(adapter);
-err_flashmap:
- iounmap(adapter->hw.hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
-err_pci_reg:
-err_dma:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * e1000_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * e1000_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-static void __devexit e1000_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct e1000_adapter *adapter = netdev_priv(netdev);
- bool down = test_bit(__E1000_DOWN, &adapter->state);
-
- /*
- * The timers may be rescheduled, so explicitly disable them
- * from being rescheduled.
- */
- if (!down)
- set_bit(__E1000_DOWN, &adapter->state);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- cancel_work_sync(&adapter->reset_task);
- cancel_work_sync(&adapter->watchdog_task);
- cancel_work_sync(&adapter->downshift_task);
- cancel_work_sync(&adapter->update_phy_task);
- cancel_work_sync(&adapter->print_hang_task);
-
- if (!(netdev->flags & IFF_UP))
- e1000_power_down_phy(adapter);
-
- /* Don't lie to e1000_close() down the road. */
- if (!down)
- clear_bit(__E1000_DOWN, &adapter->state);
- unregister_netdev(netdev);
-
- if (pci_dev_run_wake(pdev))
- pm_runtime_get_noresume(&pdev->dev);
-
- /*
- * Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant.
- */
- e1000e_release_hw_control(adapter);
-
- e1000e_reset_interrupt_capability(adapter);
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-
- iounmap(adapter->hw.hw_addr);
- if (adapter->hw.flash_address)
- iounmap(adapter->hw.flash_address);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
-
- free_netdev(netdev);
-
- /* AER disable */
- pci_disable_pcie_error_reporting(pdev);
-
- pci_disable_device(pdev);
-}
-
-/* PCI Error Recovery (ERS) */
-static struct pci_error_handlers e1000_err_handler = {
- .error_detected = e1000_io_error_detected,
- .slot_reset = e1000_io_slot_reset,
- .resume = e1000_io_resume,
-};
-
-static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
- board_80003es2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
- board_80003es2lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
-
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
-
- { } /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
-
-#ifdef CONFIG_PM
-static const struct dev_pm_ops e1000_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
- SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
- e1000_runtime_resume, e1000_idle)
-};
-#endif
-
-/* PCI Device API Driver */
-static struct pci_driver e1000_driver = {
- .name = e1000e_driver_name,
- .id_table = e1000_pci_tbl,
- .probe = e1000_probe,
- .remove = __devexit_p(e1000_remove),
-#ifdef CONFIG_PM
- .driver.pm = &e1000_pm_ops,
-#endif
- .shutdown = e1000_shutdown,
- .err_handler = &e1000_err_handler
-};
-
-/**
- * e1000_init_module - Driver Registration Routine
- *
- * e1000_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-static int __init e1000_init_module(void)
-{
- int ret;
- pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
- e1000e_driver_version);
- pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n");
- ret = pci_register_driver(&e1000_driver);
-
- return ret;
-}
-module_init(e1000_init_module);
-
-/**
- * e1000_exit_module - Driver Exit Cleanup Routine
- *
- * e1000_exit_module is called just before the driver is removed
- * from memory.
- **/
-static void __exit e1000_exit_module(void)
-{
- pci_unregister_driver(&e1000_driver);
-}
-module_exit(e1000_exit_module);
-
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
-MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-/* e1000_main.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-
-#include "e1000.h"
-
-/*
- * This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-
-#define E1000_MAX_NIC 32
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-#define COPYBREAK_DEFAULT 256
-unsigned int copybreak = COPYBREAK_DEFAULT;
-module_param(copybreak, uint, 0644);
-MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
-
-/*
- * All parameters are treated the same, as an integer array of values.
- * This macro just reduces the need to repeat the same declaration code
- * over and over (plus this helps to avoid typo bugs).
- */
-
-#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
-#define E1000_PARAM(X, desc) \
- static int __devinitdata X[E1000_MAX_NIC+1] \
- = E1000_PARAM_INIT; \
- static unsigned int num_##X; \
- module_param_array_named(X, X, int, &num_##X, 0); \
- MODULE_PARM_DESC(X, desc);
-
-/*
- * Transmit Interrupt Delay in units of 1.024 microseconds
- * Tx interrupt delay needs to typically be set to something non-zero
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
-#define DEFAULT_TIDV 8
-#define MAX_TXDELAY 0xFFFF
-#define MIN_TXDELAY 0
-
-/*
- * Transmit Absolute Interrupt Delay in units of 1.024 microseconds
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
-#define DEFAULT_TADV 32
-#define MAX_TXABSDELAY 0xFFFF
-#define MIN_TXABSDELAY 0
-
-/*
- * Receive Interrupt Delay in units of 1.024 microseconds
- * hardware will likely hang if you set this to anything but zero.
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
-#define MAX_RXDELAY 0xFFFF
-#define MIN_RXDELAY 0
-
-/*
- * Receive Absolute Interrupt Delay in units of 1.024 microseconds
- *
- * Valid Range: 0-65535
- */
-E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
-#define MAX_RXABSDELAY 0xFFFF
-#define MIN_RXABSDELAY 0
-
-/*
- * Interrupt Throttle Rate (interrupts/sec)
- *
- * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
- */
-E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
-#define DEFAULT_ITR 3
-#define MAX_ITR 100000
-#define MIN_ITR 100
-
-/* IntMode (Interrupt Mode)
- *
- * Valid Range: 0 - 2
- *
- * Default Value: 2 (MSI-X)
- */
-E1000_PARAM(IntMode, "Interrupt Mode");
-#define MAX_INTMODE 2
-#define MIN_INTMODE 0
-
-/*
- * Enable Smart Power Down of the PHY
- *
- * Valid Range: 0, 1
- *
- * Default Value: 0 (disabled)
- */
-E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
-
-/*
- * Enable Kumeran Lock Loss workaround
- *
- * Valid Range: 0, 1
- *
- * Default Value: 1 (enabled)
- */
-E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
-
-/*
- * Write Protect NVM
- *
- * Valid Range: 0, 1
- *
- * Default Value: 1 (enabled)
- */
-E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
-
-/*
- * Enable CRC Stripping
- *
- * Valid Range: 0, 1
- *
- * Default Value: 1 (enabled)
- */
-E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
- "the CRC");
-
-struct e1000_option {
- enum { enable_option, range_option, list_option } type;
- const char *name;
- const char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- struct e1000_opt_list { int i; char *str; } *p;
- } l;
- } arg;
-};
-
-static int __devinit e1000_validate_option(unsigned int *value,
- const struct e1000_option *opt,
- struct e1000_adapter *adapter)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- e_info("%s Enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- e_info("%s Disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- e_info("%s set to %i\n", opt->name, *value);
- return 0;
- }
- break;
- case list_option: {
- int i;
- struct e1000_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- e_info("%s\n", ent->str);
- return 0;
- }
- }
- }
- break;
- default:
- BUG();
- }
-
- e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
- opt->err);
- *value = opt->def;
- return -1;
-}
-
-/**
- * e1000e_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- **/
-void __devinit e1000e_check_options(struct e1000_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- int bd = adapter->bd_number;
-
- if (bd >= E1000_MAX_NIC) {
- e_notice("Warning: no configuration for board #%i\n", bd);
- e_notice("Using defaults for all values\n");
- }
-
- { /* Transmit Interrupt Delay */
- static const struct e1000_option opt = {
- .type = range_option,
- .name = "Transmit Interrupt Delay",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_TIDV),
- .def = DEFAULT_TIDV,
- .arg = { .r = { .min = MIN_TXDELAY,
- .max = MAX_TXDELAY } }
- };
-
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- e1000_validate_option(&adapter->tx_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_int_delay = opt.def;
- }
- }
- { /* Transmit Absolute Interrupt Delay */
- static const struct e1000_option opt = {
- .type = range_option,
- .name = "Transmit Absolute Interrupt Delay",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_TADV),
- .def = DEFAULT_TADV,
- .arg = { .r = { .min = MIN_TXABSDELAY,
- .max = MAX_TXABSDELAY } }
- };
-
- if (num_TxAbsIntDelay > bd) {
- adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
- e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->tx_abs_int_delay = opt.def;
- }
- }
- { /* Receive Interrupt Delay */
- static struct e1000_option opt = {
- .type = range_option,
- .name = "Receive Interrupt Delay",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_RDTR),
- .def = DEFAULT_RDTR,
- .arg = { .r = { .min = MIN_RXDELAY,
- .max = MAX_RXDELAY } }
- };
-
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- e1000_validate_option(&adapter->rx_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_int_delay = opt.def;
- }
- }
- { /* Receive Absolute Interrupt Delay */
- static const struct e1000_option opt = {
- .type = range_option,
- .name = "Receive Absolute Interrupt Delay",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_RADV),
- .def = DEFAULT_RADV,
- .arg = { .r = { .min = MIN_RXABSDELAY,
- .max = MAX_RXABSDELAY } }
- };
-
- if (num_RxAbsIntDelay > bd) {
- adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
- e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
- adapter);
- } else {
- adapter->rx_abs_int_delay = opt.def;
- }
- }
- { /* Interrupt Throttling Rate */
- static const struct e1000_option opt = {
- .type = range_option,
- .name = "Interrupt Throttling Rate (ints/sec)",
- .err = "using default of "
- __MODULE_STRING(DEFAULT_ITR),
- .def = DEFAULT_ITR,
- .arg = { .r = { .min = MIN_ITR,
- .max = MAX_ITR } }
- };
-
- if (num_InterruptThrottleRate > bd) {
- adapter->itr = InterruptThrottleRate[bd];
- switch (adapter->itr) {
- case 0:
- e_info("%s turned off\n", opt.name);
- break;
- case 1:
- e_info("%s set to dynamic mode\n", opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 3:
- e_info("%s set to dynamic conservative mode\n",
- opt.name);
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- break;
- case 4:
- e_info("%s set to simplified (2000-8000 ints) "
- "mode\n", opt.name);
- adapter->itr_setting = 4;
- break;
- default:
- /*
- * Save the setting, because the dynamic bits
- * change itr.
- */
- if (e1000_validate_option(&adapter->itr, &opt,
- adapter) &&
- (adapter->itr == 3)) {
- /*
- * In case of invalid user value,
- * default to conservative mode.
- */
- adapter->itr_setting = adapter->itr;
- adapter->itr = 20000;
- } else {
- /*
- * Clear the lower two bits because
- * they are used as control.
- */
- adapter->itr_setting =
- adapter->itr & ~3;
- }
- break;
- }
- } else {
- adapter->itr_setting = opt.def;
- adapter->itr = 20000;
- }
- }
- { /* Interrupt Mode */
- static struct e1000_option opt = {
- .type = range_option,
- .name = "Interrupt Mode",
- .err = "defaulting to 2 (MSI-X)",
- .def = E1000E_INT_MODE_MSIX,
- .arg = { .r = { .min = MIN_INTMODE,
- .max = MAX_INTMODE } }
- };
-
- if (num_IntMode > bd) {
- unsigned int int_mode = IntMode[bd];
- e1000_validate_option(&int_mode, &opt, adapter);
- adapter->int_mode = int_mode;
- } else {
- adapter->int_mode = opt.def;
- }
- }
- { /* Smart Power Down */
- static const struct e1000_option opt = {
- .type = enable_option,
- .name = "PHY Smart Power Down",
- .err = "defaulting to Disabled",
- .def = OPTION_DISABLED
- };
-
- if (num_SmartPowerDownEnable > bd) {
- unsigned int spd = SmartPowerDownEnable[bd];
- e1000_validate_option(&spd, &opt, adapter);
- if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
- && spd)
- adapter->flags |= FLAG_SMART_POWER_DOWN;
- }
- }
- { /* CRC Stripping */
- static const struct e1000_option opt = {
- .type = enable_option,
- .name = "CRC Stripping",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_CrcStripping > bd) {
- unsigned int crc_stripping = CrcStripping[bd];
- e1000_validate_option(&crc_stripping, &opt, adapter);
- if (crc_stripping == OPTION_ENABLED)
- adapter->flags2 |= FLAG2_CRC_STRIPPING;
- } else {
- adapter->flags2 |= FLAG2_CRC_STRIPPING;
- }
- }
- { /* Kumeran Lock Loss Workaround */
- static const struct e1000_option opt = {
- .type = enable_option,
- .name = "Kumeran Lock Loss Workaround",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_KumeranLockLoss > bd) {
- unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
- e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
- if (hw->mac.type == e1000_ich8lan)
- e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- kmrn_lock_loss);
- } else {
- if (hw->mac.type == e1000_ich8lan)
- e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
- opt.def);
- }
- }
- { /* Write-protect NVM */
- static const struct e1000_option opt = {
- .type = enable_option,
- .name = "Write-protect NVM",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (adapter->flags & FLAG_IS_ICH) {
- if (num_WriteProtectNVM > bd) {
- unsigned int write_protect_nvm = WriteProtectNVM[bd];
- e1000_validate_option(&write_protect_nvm, &opt,
- adapter);
- if (write_protect_nvm)
- adapter->flags |= FLAG_READ_ONLY_NVM;
- } else {
- if (opt.def)
- adapter->flags |= FLAG_READ_ONLY_NVM;
- }
- }
- }
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/1000 Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/delay.h>
-
-#include "e1000.h"
-
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
-static s32 e1000_wait_autoneg(struct e1000_hw *hw);
-static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
-static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read, bool page_set);
-static u32 e1000_get_phy_addr_for_hv_page(u32 page);
-static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read);
-
-/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] = {
- 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
-#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_m88_cable_length_table)
-
-static const u16 e1000_igp_2_cable_length_table[] = {
- 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
- 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
- 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
- 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
- 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
- 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
- 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
- 124};
-#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
- ARRAY_SIZE(e1000_igp_2_cable_length_table)
-
-#define BM_PHY_REG_PAGE(offset) \
- ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
-#define BM_PHY_REG_NUM(offset) \
- ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
- (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
- ~MAX_PHY_REG_ADDRESS)))
-
-#define HV_INTC_FC_PAGE_START 768
-#define I82578_ADDR_REG 29
-#define I82577_ADDR_REG 16
-#define I82577_CFG_REG 22
-#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
-#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
-#define I82577_CTRL_REG 23
-
-/* 82577 specific PHY registers */
-#define I82577_PHY_CTRL_2 18
-#define I82577_PHY_STATUS_2 26
-#define I82577_PHY_DIAG_STATUS 31
-
-/* I82577 PHY Status 2 */
-#define I82577_PHY_STATUS2_REV_POLARITY 0x0400
-#define I82577_PHY_STATUS2_MDIX 0x0800
-#define I82577_PHY_STATUS2_SPEED_MASK 0x0300
-#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
-
-/* I82577 PHY Control 2 */
-#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
-#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
-
-/* I82577 PHY Diagnostics Status */
-#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
-#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
-
-/* BM PHY Copper Specific Control 1 */
-#define BM_CS_CTRL1 16
-
-#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
-#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
-#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
-
-/**
- * e1000e_check_reset_block_generic - Check if PHY reset is blocked
- * @hw: pointer to the HW structure
- *
- * Read the PHY management control register and check whether a PHY reset
- * is blocked. If a reset is not blocked return 0, otherwise
- * return E1000_BLK_PHY_RESET (12).
- **/
-s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
-{
- u32 manc;
-
- manc = er32(MANC);
-
- return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
- E1000_BLK_PHY_RESET : 0;
-}
-
-/**
- * e1000e_get_phy_id - Retrieve the PHY ID and revision
- * @hw: pointer to the HW structure
- *
- * Reads the PHY registers and stores the PHY ID and possibly the PHY
- * revision in the hardware structure.
- **/
-s32 e1000e_get_phy_id(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 phy_id;
- u16 retry_count = 0;
-
- if (!(phy->ops.read_reg))
- goto out;
-
- while (retry_count < 2) {
- ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
- if (ret_val)
- goto out;
-
- phy->id = (u32)(phy_id << 16);
- udelay(20);
- ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
- if (ret_val)
- goto out;
-
- phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
- phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
-
- if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
- goto out;
-
- retry_count++;
- }
-out:
- return ret_val;
-}
-
-/**
- * e1000e_phy_reset_dsp - Reset PHY DSP
- * @hw: pointer to the HW structure
- *
- * Reset the digital signal processor.
- **/
-s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
- if (ret_val)
- return ret_val;
-
- return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
-}
-
-/**
- * e1000e_read_phy_reg_mdic - Read MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the MDI control register in the PHY at offset and stores the
- * information read to data.
- **/
-s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
- e_dbg("PHY Address %d is out of range\n", offset);
- return -E1000_ERR_PARAM;
- }
-
- /*
- * Set up Op-code, Phy Address, and register offset in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
-
- ew32(MDIC, mdic);
-
- /*
- * Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
- * the lower time out
- */
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- e_dbg("MDI Read did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (mdic & E1000_MDIC_ERROR) {
- e_dbg("MDI Error\n");
- return -E1000_ERR_PHY;
- }
- *data = (u16) mdic;
-
- /*
- * Allow some time after each MDIC transaction to avoid
- * reading duplicate data in the next MDIC transaction.
- */
- if (hw->mac.type == e1000_pch2lan)
- udelay(100);
-
- return 0;
-}
-
-/**
- * e1000e_write_phy_reg_mdic - Write MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write to register at offset
- *
- * Writes data to MDI control register in the PHY at offset.
- **/
-s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
- e_dbg("PHY Address %d is out of range\n", offset);
- return -E1000_ERR_PARAM;
- }
-
- /*
- * Set up Op-code, Phy Address, and register offset in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
-
- ew32(MDIC, mdic);
-
- /*
- * Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
- * the lower time out
- */
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
- mdic = er32(MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- e_dbg("MDI Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (mdic & E1000_MDIC_ERROR) {
- e_dbg("MDI Error\n");
- return -E1000_ERR_PHY;
- }
-
- /*
- * Allow some time after each MDIC transaction to avoid
- * reading duplicate data in the next MDIC transaction.
- */
- if (hw->mac.type == e1000_pch2lan)
- udelay(100);
-
- return 0;
-}
-
-/**
- * e1000e_read_phy_reg_m88 - Read m88 PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
- * semaphores before exiting.
- **/
-s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release(hw);
-
- return ret_val;
-}
-
-/**
- * e1000e_write_phy_reg_m88 - Write m88 PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_set_page_igp - Set page as on IGP-like PHY(s)
- * @hw: pointer to the HW structure
- * @page: page to set (shifted left when necessary)
- *
- * Sets PHY page required for PHY register access. Assumes semaphore is
- * already acquired. Note, this function sets phy.addr to 1 so the caller
- * must set it appropriately (if necessary) after this function returns.
- **/
-s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
-{
- e_dbg("Setting page 0x%x\n", page);
-
- hw->phy.addr = 1;
-
- return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
-}
-
-/**
- * __e1000e_read_phy_reg_igp - Read igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and stores the retrieved information in data. Release any acquired
- * semaphores before exiting.
- **/
-static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
-{
- s32 ret_val = 0;
-
- if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- }
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val)
- goto release;
- }
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-release:
- if (!locked)
- hw->phy.ops.release(hw);
-out:
- return ret_val;
-}
-
-/**
- * e1000e_read_phy_reg_igp - Read igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore then reads the PHY register at offset and stores the
- * retrieved information in data.
- * Release the acquired semaphore before exiting.
- **/
-s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000e_read_phy_reg_igp(hw, offset, data, false);
-}
-
-/**
- * e1000e_read_phy_reg_igp_locked - Read igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the PHY register at offset and stores the retrieved information
- * in data. Assumes semaphore already acquired.
- **/
-s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000e_read_phy_reg_igp(hw, offset, data, true);
-}
-
-/**
- * e1000e_write_phy_reg_igp - Write igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
-{
- s32 ret_val = 0;
-
- if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- }
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = e1000e_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val)
- goto release;
- }
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-release:
- if (!locked)
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_write_phy_reg_igp - Write igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000e_write_phy_reg_igp(hw, offset, data, false);
-}
-
-/**
- * e1000e_write_phy_reg_igp_locked - Write igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes the data to PHY register at the offset.
- * Assumes semaphore already acquired.
- **/
-s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000e_write_phy_reg_igp(hw, offset, data, true);
-}
-
-/**
- * __e1000_read_kmrn_reg - Read kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary. Then reads the PHY register at offset
- * using the kumeran interface. The information retrieved is stored in data.
- * Release any acquired semaphores before exiting.
- **/
-static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked)
-{
- u32 kmrnctrlsta;
- s32 ret_val = 0;
-
- if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- }
-
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
- ew32(KMRNCTRLSTA, kmrnctrlsta);
- e1e_flush();
-
- udelay(2);
-
- kmrnctrlsta = er32(KMRNCTRLSTA);
- *data = (u16)kmrnctrlsta;
-
- if (!locked)
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_read_kmrn_reg - Read kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore then reads the PHY register at offset using the
- * kumeran interface. The information retrieved is stored in data.
- * Release the acquired semaphore before exiting.
- **/
-s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000_read_kmrn_reg(hw, offset, data, false);
-}
-
-/**
- * e1000e_read_kmrn_reg_locked - Read kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the PHY register at offset using the kumeran interface. The
- * information retrieved is stored in data.
- * Assumes semaphore already acquired.
- **/
-s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000_read_kmrn_reg(hw, offset, data, true);
-}
-
-/**
- * __e1000_write_kmrn_reg - Write kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary. Then write the data to PHY register
- * at the offset using the kumeran interface. Release any acquired semaphores
- * before exiting.
- **/
-static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked)
-{
- u32 kmrnctrlsta;
- s32 ret_val = 0;
-
- if (!locked) {
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
- }
-
- kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
- E1000_KMRNCTRLSTA_OFFSET) | data;
- ew32(KMRNCTRLSTA, kmrnctrlsta);
- e1e_flush();
-
- udelay(2);
-
- if (!locked)
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_write_kmrn_reg - Write kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore then writes the data to the PHY register at the offset
- * using the kumeran interface. Release the acquired semaphore before exiting.
- **/
-s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000_write_kmrn_reg(hw, offset, data, false);
-}
-
-/**
- * e1000e_write_kmrn_reg_locked - Write kumeran register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Write the data to PHY register at the offset using the kumeran interface.
- * Assumes semaphore already acquired.
- **/
-s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000_write_kmrn_reg(hw, offset, data, true);
-}
-
-/**
- * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up Carrier-sense on Transmit and downshift values.
- **/
-s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_data;
-
- /* Enable CRS on Tx. This must be set for half-duplex operation. */
- ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
-
- /* Enable downshift */
- phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
-
- ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
- * and downshift values are set also.
- **/
-s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
-
- /* Enable CRS on Tx. This must be set for half-duplex operation. */
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* For BM PHY this bit is downshift enable */
- if (phy->type != e1000_phy_bm)
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
- /*
- * Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
- switch (phy->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- case 0:
- default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
-
- /*
- * Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (phy->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-
- /* Enable downshift on BM (disabled by default) */
- if (phy->type == e1000_phy_bm)
- phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
-
- ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- if ((phy->type == e1000_phy_m88) &&
- (phy->revision < E1000_REVISION_4) &&
- (phy->id != BME1000_E_PHY_ID_R2)) {
- /*
- * Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
- if ((phy->revision == 2) &&
- (phy->id == M88E1111_I_PHY_ID)) {
- /* 82573L PHY - set the downshift counter to 5x. */
- phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
- phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
- } else {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- }
- ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
- /* Set PHY page 0, register 29 to 0x0003 */
- ret_val = e1e_wphy(hw, 29, 0x0003);
- if (ret_val)
- return ret_val;
-
- /* Set PHY page 0, register 30 to 0x0000 */
- ret_val = e1e_wphy(hw, 30, 0x0000);
- if (ret_val)
- return ret_val;
- }
-
- /* Commit the changes. */
- ret_val = e1000e_commit_phy(hw);
- if (ret_val) {
- e_dbg("Error committing the PHY changes\n");
- return ret_val;
- }
-
- if (phy->type == e1000_phy_82578) {
- ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /* 82578 PHY - set the downshift count to 1x. */
- phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
- phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
- ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
- }
-
- return 0;
-}
-
-/**
- * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
- * igp PHY's.
- **/
-s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = e1000_phy_hw_reset(hw);
- if (ret_val) {
- e_dbg("Error resetting the PHY.\n");
- return ret_val;
- }
-
- /*
- * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
- * timeout issues when LFS is enabled.
- */
- msleep(100);
-
- /* disable lplu d0 during driver init */
- ret_val = e1000_set_d0_lplu_state(hw, false);
- if (ret_val) {
- e_dbg("Error Disabling LPLU D0\n");
- return ret_val;
- }
- /* Configure mdi-mdix settings */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
- switch (phy->mdix) {
- case 1:
- data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 2:
- data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 0:
- default:
- data |= IGP01E1000_PSCR_AUTO_MDIX;
- break;
- }
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
- if (ret_val)
- return ret_val;
-
- /* set auto-master slave resolution settings */
- if (hw->mac.autoneg) {
- /*
- * when autonegotiation advertisement is only 1000Mbps then we
- * should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default.
- */
- if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
- /* Disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
-
- /* Set auto Master/Slave resolution process */
- ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~CR_1000T_MS_ENABLE;
- ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
- if (ret_val)
- return ret_val;
- }
-
- ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
- if (ret_val)
- return ret_val;
-
- /* load defaults for future use */
- phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
- ((data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) :
- e1000_ms_auto;
-
- switch (phy->ms_type) {
- case e1000_ms_force_master:
- data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- data |= CR_1000T_MS_ENABLE;
- data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
- }
-
- return ret_val;
-}
-
-/**
- * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
- * @hw: pointer to the HW structure
- *
- * Reads the MII auto-neg advertisement register and/or the 1000T control
- * register and if the PHY is already setup for auto-negotiation, then
- * return successful. Otherwise, setup advertisement and flow control to
- * the appropriate values for the wanted auto-negotiation.
- **/
-static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 mii_autoneg_adv_reg;
- u16 mii_1000t_ctrl_reg = 0;
-
- phy->autoneg_advertised &= phy->autoneg_mask;
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
- if (ret_val)
- return ret_val;
- }
-
- /*
- * Need to parse both autoneg_advertised and fc and set up
- * the appropriate PHY registers. First we will parse for
- * autoneg_advertised software override. Since we can advertise
- * a plethora of combinations, we need to check each bit
- * individually.
- */
-
- /*
- * First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
- NWAY_AR_100TX_HD_CAPS |
- NWAY_AR_10T_FD_CAPS |
- NWAY_AR_10T_HD_CAPS);
- mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
-
- e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
-
- /* Do we want to advertise 10 Mb Half Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
- e_dbg("Advertise 10mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
- }
-
- /* Do we want to advertise 10 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
- e_dbg("Advertise 10mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Half Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
- e_dbg("Advertise 100mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
- e_dbg("Advertise 100mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
- }
-
- /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
- if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
- e_dbg("Advertise 1000mb Half duplex request denied!\n");
-
- /* Do we want to advertise 1000 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
- e_dbg("Advertise 1000mb Full duplex\n");
- mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
- }
-
- /*
- * Check for a software override of the flow control settings, and
- * setup the PHY advertisement registers accordingly. If
- * auto-negotiation is enabled, then software will have to set the
- * "PAUSE" bits to the correct value in the Auto-Negotiation
- * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
- * negotiation.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
- * other: No software override. The flow control configuration
- * in the EEPROM is used.
- */
- switch (hw->fc.current_mode) {
- case e1000_fc_none:
- /*
- * Flow control (Rx & Tx) is completely disabled by a
- * software over-ride.
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case e1000_fc_rx_pause:
- /*
- * Rx Flow control is enabled, and Tx Flow control is
- * disabled, by a software over-ride.
- *
- * Since there really isn't a way to advertise that we are
- * capable of Rx Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric Rx PAUSE. Later
- * (in e1000e_config_fc_after_link_up) we will disable the
- * hw's ability to send PAUSE frames.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case e1000_fc_tx_pause:
- /*
- * Tx Flow control is enabled, and Rx Flow control is
- * disabled, by a software over-ride.
- */
- mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
- mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
- break;
- case e1000_fc_full:
- /*
- * Flow control (both Rx and Tx) is enabled by a software
- * over-ride.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- default:
- e_dbg("Flow control param set incorrectly\n");
- ret_val = -E1000_ERR_CONFIG;
- return ret_val;
- }
-
- ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
- if (ret_val)
- return ret_val;
-
- e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-
- if (phy->autoneg_mask & ADVERTISE_1000_FULL)
- ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
-
- return ret_val;
-}
-
-/**
- * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
- * @hw: pointer to the HW structure
- *
- * Performs initial bounds checking on autoneg advertisement parameter, then
- * configure to advertise the full capability. Setup the PHY to autoneg
- * and restart the negotiation process between the link partner. If
- * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
- **/
-static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_ctrl;
-
- /*
- * Perform some bounds checking on the autoneg advertisement
- * parameter.
- */
- phy->autoneg_advertised &= phy->autoneg_mask;
-
- /*
- * If autoneg_advertised is zero, we assume it was not defaulted
- * by the calling code so we set to advertise full capability.
- */
- if (phy->autoneg_advertised == 0)
- phy->autoneg_advertised = phy->autoneg_mask;
-
- e_dbg("Reconfiguring auto-neg advertisement params\n");
- ret_val = e1000_phy_setup_autoneg(hw);
- if (ret_val) {
- e_dbg("Error Setting up Auto-Negotiation\n");
- return ret_val;
- }
- e_dbg("Restarting Auto-Neg\n");
-
- /*
- * Restart auto-negotiation by setting the Auto Neg Enable bit and
- * the Auto Neg Restart bit in the PHY control register.
- */
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
- if (ret_val)
- return ret_val;
-
- phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
- if (ret_val)
- return ret_val;
-
- /*
- * Does the user want to wait for Auto-Neg to complete here, or
- * check at a later time (for example, callback routine).
- */
- if (phy->autoneg_wait_to_complete) {
- ret_val = e1000_wait_autoneg(hw);
- if (ret_val) {
- e_dbg("Error while waiting for "
- "autoneg to complete\n");
- return ret_val;
- }
- }
-
- hw->mac.get_link_status = 1;
-
- return ret_val;
-}
-
-/**
- * e1000e_setup_copper_link - Configure copper link settings
- * @hw: pointer to the HW structure
- *
- * Calls the appropriate function to configure the link for auto-neg or forced
- * speed and duplex. Then we check for link, once link is established calls
- * to configure collision distance and flow control are called. If link is
- * not established, we return -E1000_ERR_PHY (-2).
- **/
-s32 e1000e_setup_copper_link(struct e1000_hw *hw)
-{
- s32 ret_val;
- bool link;
-
- if (hw->mac.autoneg) {
- /*
- * Setup autoneg and flow control advertisement and perform
- * autonegotiation.
- */
- ret_val = e1000_copper_link_autoneg(hw);
- if (ret_val)
- return ret_val;
- } else {
- /*
- * PHY will be set to 10H, 10F, 100H or 100F
- * depending on user settings.
- */
- e_dbg("Forcing Speed and Duplex\n");
- ret_val = e1000_phy_force_speed_duplex(hw);
- if (ret_val) {
- e_dbg("Error Forcing Speed and Duplex\n");
- return ret_val;
- }
- }
-
- /*
- * Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
- ret_val = e1000e_phy_has_link_generic(hw,
- COPPER_LINK_UP_LIMIT,
- 10,
- &link);
- if (ret_val)
- return ret_val;
-
- if (link) {
- e_dbg("Valid link established!!!\n");
- e1000e_config_collision_dist(hw);
- ret_val = e1000e_config_fc_after_link_up(hw);
- } else {
- e_dbg("Unable to establish link!!!\n");
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex. Clears the
- * auto-crossover to force MDI manually. Waits for link and returns
- * successful if link up is successful, else -E1000_ERR_PHY (-2).
- **/
-s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- /*
- * Clear Auto-Crossover to force MDI manually. IGP requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- e_dbg("IGP PSCR: %X\n", phy_data);
-
- udelay(1);
-
- if (phy->autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
-
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- return ret_val;
-
- if (!link)
- e_dbg("Link taking longer than expected.\n");
-
- /* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- return ret_val;
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex. Clears the
- * auto-crossover to force MDI manually. Resets the PHY to commit the
- * changes. If time expires while waiting for link up, we reset the DSP.
- * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
- * successful completion, else return corresponding error code.
- **/
-s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- /*
- * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
- ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- e_dbg("M88E1000 PSCR: %X\n", phy_data);
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- return ret_val;
-
- e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- return ret_val;
-
- /* Reset the phy to commit changes. */
- ret_val = e1000e_commit_phy(hw);
- if (ret_val)
- return ret_val;
-
- if (phy->autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
-
- ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
- if (ret_val)
- return ret_val;
-
- if (!link) {
- if (hw->phy.type != e1000_phy_m88) {
- e_dbg("Link taking longer than expected.\n");
- } else {
- /*
- * We didn't get link.
- * Reset the DSP and cross our fingers.
- */
- ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
- 0x001d);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_phy_reset_dsp(hw);
- if (ret_val)
- return ret_val;
- }
- }
-
- /* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
- 100000, &link);
- if (ret_val)
- return ret_val;
- }
-
- if (hw->phy.type != e1000_phy_m88)
- return 0;
-
- ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- /*
- * Resetting the phy means we need to re-force TX_CLK in the
- * Extended PHY Specific Control Register to 25MHz clock from
- * the reset value of 2.5MHz.
- */
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
- ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- return ret_val;
-
- /*
- * In addition, we must re-enable CRS on Tx for both half and full
- * duplex.
- */
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-
- return ret_val;
-}
-
-/**
- * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
- * @hw: pointer to the HW structure
- *
- * Forces the speed and duplex settings of the PHY.
- * This is a function pointer entry point only called by
- * PHY setup routines.
- **/
-s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
- if (ret_val)
- goto out;
-
- e1000e_phy_force_speed_duplex_setup(hw, &data);
-
- ret_val = e1e_wphy(hw, PHY_CONTROL, data);
- if (ret_val)
- goto out;
-
- /* Disable MDI-X support for 10/100 */
- ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
- if (ret_val)
- goto out;
-
- data &= ~IFE_PMC_AUTO_MDIX;
- data &= ~IFE_PMC_FORCE_MDIX;
-
- ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
- if (ret_val)
- goto out;
-
- e_dbg("IFE PMC: %X\n", data);
-
- udelay(1);
-
- if (phy->autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
-
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
-
- if (!link)
- e_dbg("Link taking longer than expected.\n");
-
- /* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
- * @hw: pointer to the HW structure
- * @phy_ctrl: pointer to current value of PHY_CONTROL
- *
- * Forces speed and duplex on the PHY by doing the following: disable flow
- * control, force speed/duplex on the MAC, disable auto speed detection,
- * disable auto-negotiation, configure duplex, configure speed, configure
- * the collision distance, write configuration to CTRL register. The
- * caller must write to the PHY_CONTROL register for these settings to
- * take affect.
- **/
-void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 ctrl;
-
- /* Turn off flow control when forcing speed/duplex */
- hw->fc.current_mode = e1000_fc_none;
-
- /* Force speed/duplex on the mac */
- ctrl = er32(CTRL);
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~E1000_CTRL_SPD_SEL;
-
- /* Disable Auto Speed Detection */
- ctrl &= ~E1000_CTRL_ASDE;
-
- /* Disable autoneg on the phy */
- *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
-
- /* Forcing Full or Half Duplex? */
- if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
- ctrl &= ~E1000_CTRL_FD;
- *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
- e_dbg("Half Duplex\n");
- } else {
- ctrl |= E1000_CTRL_FD;
- *phy_ctrl |= MII_CR_FULL_DUPLEX;
- e_dbg("Full Duplex\n");
- }
-
- /* Forcing 10mb or 100mb? */
- if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
- ctrl |= E1000_CTRL_SPD_100;
- *phy_ctrl |= MII_CR_SPEED_100;
- *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- e_dbg("Forcing 100mb\n");
- } else {
- ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- *phy_ctrl |= MII_CR_SPEED_10;
- *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- e_dbg("Forcing 10mb\n");
- }
-
- e1000e_config_collision_dist(hw);
-
- ew32(CTRL, ctrl);
-}
-
-/**
- * e1000e_set_d3_lplu_state - Sets low power link up state for D3
- * @hw: pointer to the HW structure
- * @active: boolean used to enable/disable lplu
- *
- * Success returns 0, Failure returns 1
- *
- * The low power link up (lplu) state is set to the power management level D3
- * and SmartSpeed is disabled when active is true, else clear lplu for D3
- * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
- * is used during Dx states where the power conservation is most important.
- * During driver activity, SmartSpeed should be enabled so performance is
- * maintained.
- **/
-s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
- if (ret_val)
- return ret_val;
-
- if (!active) {
- data &= ~IGP02E1000_PM_D3_LPLU;
- ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
- if (ret_val)
- return ret_val;
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- return ret_val;
- }
- } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
- (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
- (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
- data |= IGP02E1000_PM_D3_LPLU;
- ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
- if (ret_val)
- return ret_val;
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
- if (ret_val)
- return ret_val;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_check_downshift - Checks whether a downshift in speed occurred
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns 1
- *
- * A downshift is detected by querying the PHY link health.
- **/
-s32 e1000e_check_downshift(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, offset, mask;
-
- switch (phy->type) {
- case e1000_phy_m88:
- case e1000_phy_gg82563:
- case e1000_phy_bm:
- case e1000_phy_82578:
- offset = M88E1000_PHY_SPEC_STATUS;
- mask = M88E1000_PSSR_DOWNSHIFT;
- break;
- case e1000_phy_igp_2:
- case e1000_phy_igp_3:
- offset = IGP01E1000_PHY_LINK_HEALTH;
- mask = IGP01E1000_PLHR_SS_DOWNGRADE;
- break;
- default:
- /* speed downshift not supported */
- phy->speed_downgraded = false;
- return 0;
- }
-
- ret_val = e1e_rphy(hw, offset, &phy_data);
-
- if (!ret_val)
- phy->speed_downgraded = (phy_data & mask);
-
- return ret_val;
-}
-
-/**
- * e1000_check_polarity_m88 - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY specific status register.
- **/
-s32 e1000_check_polarity_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * e1000_check_polarity_igp - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY port status register, and the
- * current speed (since there is no polarity at 100Mbps).
- **/
-s32 e1000_check_polarity_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data, offset, mask;
-
- /*
- * Polarity is determined based on the speed of
- * our connection.
- */
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
- if (ret_val)
- return ret_val;
-
- if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- offset = IGP01E1000_PHY_PCS_INIT_REG;
- mask = IGP01E1000_PHY_POLARITY_MASK;
- } else {
- /*
- * This really only applies to 10Mbps since
- * there is no polarity for 100Mbps (always 0).
- */
- offset = IGP01E1000_PHY_PORT_STATUS;
- mask = IGP01E1000_PSSR_POLARITY_REVERSED;
- }
-
- ret_val = e1e_rphy(hw, offset, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * e1000_check_polarity_ife - Check cable polarity for IFE PHY
- * @hw: pointer to the HW structure
- *
- * Polarity is determined on the polarity reversal feature being enabled.
- **/
-s32 e1000_check_polarity_ife(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, offset, mask;
-
- /*
- * Polarity is determined based on the reversal feature being enabled.
- */
- if (phy->polarity_correction) {
- offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
- mask = IFE_PESC_POLARITY_REVERSED;
- } else {
- offset = IFE_PHY_SPECIAL_CONTROL;
- mask = IFE_PSC_FORCE_POLARITY;
- }
-
- ret_val = e1e_rphy(hw, offset, &phy_data);
-
- if (!ret_val)
- phy->cable_polarity = (phy_data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * e1000_wait_autoneg - Wait for auto-neg completion
- * @hw: pointer to the HW structure
- *
- * Waits for auto-negotiation to complete or for the auto-negotiation time
- * limit to expire, which ever happens first.
- **/
-static s32 e1000_wait_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 i, phy_status;
-
- /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
- for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
- ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- if (phy_status & MII_SR_AUTONEG_COMPLETE)
- break;
- msleep(100);
- }
-
- /*
- * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
- * has completed.
- */
- return ret_val;
-}
-
-/**
- * e1000e_phy_has_link_generic - Polls PHY for link
- * @hw: pointer to the HW structure
- * @iterations: number of times to poll for link
- * @usec_interval: delay between polling attempts
- * @success: pointer to whether polling was successful or not
- *
- * Polls the PHY status register for link, 'iterations' number of times.
- **/
-s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success)
-{
- s32 ret_val = 0;
- u16 i, phy_status;
-
- for (i = 0; i < iterations; i++) {
- /*
- * Some PHYs require the PHY_STATUS register to be read
- * twice due to the link bit being sticky. No harm doing
- * it across the board.
- */
- ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- /*
- * If the first read fails, another entity may have
- * ownership of the resources, wait and try again to
- * see if they have relinquished the resources yet.
- */
- udelay(usec_interval);
- ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- if (phy_status & MII_SR_LINK_STATUS)
- break;
- if (usec_interval >= 1000)
- mdelay(usec_interval/1000);
- else
- udelay(usec_interval);
- }
-
- *success = (i < iterations);
-
- return ret_val;
-}
-
-/**
- * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
- * @hw: pointer to the HW structure
- *
- * Reads the PHY specific status register to retrieve the cable length
- * information. The cable length is determined by averaging the minimum and
- * maximum values to get the "average" cable length. The m88 PHY has four
- * possible cable length values, which are:
- * Register Value Cable Length
- * 0 < 50 meters
- * 1 50 - 80 meters
- * 2 80 - 110 meters
- * 3 110 - 140 meters
- * 4 > 140 meters
- **/
-s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, index;
-
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
- phy->min_cable_length = e1000_m88_cable_length_table[index];
- phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
-
- phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
- * @hw: pointer to the HW structure
- *
- * The automatic gain control (agc) normalizes the amplitude of the
- * received signal, adjusting for the attenuation produced by the
- * cable. By reading the AGC registers, which represent the
- * combination of coarse and fine gain value, the value can be put
- * into a lookup table to obtain the approximate cable length
- * for each channel.
- **/
-s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, i, agc_value = 0;
- u16 cur_agc_index, max_agc_index = 0;
- u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
- IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D
- };
-
- /* Read the AGC registers for all channels */
- for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
- ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
- if (ret_val)
- return ret_val;
-
- /*
- * Getting bits 15:9, which represent the combination of
- * coarse and fine gain values. The result is a number
- * that can be put into the lookup table to obtain the
- * approximate cable length.
- */
- cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
-
- /* Array index bound check. */
- if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
- (cur_agc_index == 0))
- return -E1000_ERR_PHY;
-
- /* Remove min & max AGC values from calculation. */
- if (e1000_igp_2_cable_length_table[min_agc_index] >
- e1000_igp_2_cable_length_table[cur_agc_index])
- min_agc_index = cur_agc_index;
- if (e1000_igp_2_cable_length_table[max_agc_index] <
- e1000_igp_2_cable_length_table[cur_agc_index])
- max_agc_index = cur_agc_index;
-
- agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
- }
-
- agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
- e1000_igp_2_cable_length_table[max_agc_index]);
- agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
-
- /* Calculate cable length with the error range of +/- 10 meters. */
- phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
- (agc_value - IGP02E1000_AGC_RANGE) : 0;
- phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
-
- phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-
- return ret_val;
-}
-
-/**
- * e1000e_get_phy_info_m88 - Retrieve PHY information
- * @hw: pointer to the HW structure
- *
- * Valid for only copper links. Read the PHY status register (sticky read)
- * to verify that link is up. Read the PHY special control register to
- * determine the polarity and 10base-T extended distance. Read the PHY
- * special status register to determine MDI/MDIx and current speed. If
- * speed is 1000, then determine cable length, local and remote receiver.
- **/
-s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- if (phy->media_type != e1000_media_type_copper) {
- e_dbg("Phy info is only valid for copper media\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- return ret_val;
-
- if (!link) {
- e_dbg("Phy info is only valid if link is up\n");
- return -E1000_ERR_CONFIG;
- }
-
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy->polarity_correction = (phy_data &
- M88E1000_PSCR_POLARITY_REVERSAL);
-
- ret_val = e1000_check_polarity_m88(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX);
-
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
- ret_val = e1000_get_cable_length(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- return ret_val;
-
- phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- /* Set values to "undefined" */
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
- return ret_val;
-}
-
-/**
- * e1000e_get_phy_info_igp - Retrieve igp PHY information
- * @hw: pointer to the HW structure
- *
- * Read PHY status to determine if link is up. If link is up, then
- * set/determine 10base-T extended distance and polarity correction. Read
- * PHY port status to determine MDI/MDIx and speed. Based on the speed,
- * determine on the cable length, local and remote receiver.
- **/
-s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- return ret_val;
-
- if (!link) {
- e_dbg("Phy info is only valid if link is up\n");
- return -E1000_ERR_CONFIG;
- }
-
- phy->polarity_correction = true;
-
- ret_val = e1000_check_polarity_igp(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
- if (ret_val)
- return ret_val;
-
- phy->is_mdix = (data & IGP01E1000_PSSR_MDIX);
-
- if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- ret_val = e1000_get_cable_length(hw);
- if (ret_val)
- return ret_val;
-
- ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
- if (ret_val)
- return ret_val;
-
- phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_get_phy_info_ife - Retrieves various IFE PHY states
- * @hw: pointer to the HW structure
- *
- * Populates "phy" structure with various feature states.
- **/
-s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- e_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
- if (ret_val)
- goto out;
- phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
- ? false : true;
-
- if (phy->polarity_correction) {
- ret_val = e1000_check_polarity_ife(hw);
- if (ret_val)
- goto out;
- } else {
- /* Polarity is forced */
- phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
- }
-
- ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
- if (ret_val)
- goto out;
-
- phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
-
- /* The following parameters are undefined for 10/100 operation. */
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
-
-out:
- return ret_val;
-}
-
-/**
- * e1000e_phy_sw_reset - PHY software reset
- * @hw: pointer to the HW structure
- *
- * Does a software reset of the PHY by reading the PHY control register and
- * setting/write the control register reset bit to the PHY.
- **/
-s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 phy_ctrl;
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
- if (ret_val)
- return ret_val;
-
- phy_ctrl |= MII_CR_RESET;
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
- if (ret_val)
- return ret_val;
-
- udelay(1);
-
- return ret_val;
-}
-
-/**
- * e1000e_phy_hw_reset_generic - PHY hardware reset
- * @hw: pointer to the HW structure
- *
- * Verify the reset block is not blocking us from resetting. Acquire
- * semaphore (if necessary) and read/set/write the device control reset
- * bit in the PHY. Wait the appropriate delay time for the device to
- * reset and release the semaphore (if necessary).
- **/
-s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u32 ctrl;
-
- ret_val = e1000_check_reset_block(hw);
- if (ret_val)
- return 0;
-
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
- e1e_flush();
-
- udelay(phy->reset_delay_us);
-
- ew32(CTRL, ctrl);
- e1e_flush();
-
- udelay(150);
-
- phy->ops.release(hw);
-
- return e1000_get_phy_cfg_done(hw);
-}
-
-/**
- * e1000e_get_cfg_done - Generic configuration done
- * @hw: pointer to the HW structure
- *
- * Generic function to wait 10 milli-seconds for configuration to complete
- * and return success.
- **/
-s32 e1000e_get_cfg_done(struct e1000_hw *hw)
-{
- mdelay(10);
- return 0;
-}
-
-/**
- * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
- * @hw: pointer to the HW structure
- *
- * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
- **/
-s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
-{
- e_dbg("Running IGP 3 PHY init script\n");
-
- /* PHY init IGP 3 */
- /* Enable rise/fall, 10-mode work in class-A */
- e1e_wphy(hw, 0x2F5B, 0x9018);
- /* Remove all caps from Replica path filter */
- e1e_wphy(hw, 0x2F52, 0x0000);
- /* Bias trimming for ADC, AFE and Driver (Default) */
- e1e_wphy(hw, 0x2FB1, 0x8B24);
- /* Increase Hybrid poly bias */
- e1e_wphy(hw, 0x2FB2, 0xF8F0);
- /* Add 4% to Tx amplitude in Gig mode */
- e1e_wphy(hw, 0x2010, 0x10B0);
- /* Disable trimming (TTT) */
- e1e_wphy(hw, 0x2011, 0x0000);
- /* Poly DC correction to 94.6% + 2% for all channels */
- e1e_wphy(hw, 0x20DD, 0x249A);
- /* ABS DC correction to 95.9% */
- e1e_wphy(hw, 0x20DE, 0x00D3);
- /* BG temp curve trim */
- e1e_wphy(hw, 0x28B4, 0x04CE);
- /* Increasing ADC OPAMP stage 1 currents to max */
- e1e_wphy(hw, 0x2F70, 0x29E4);
- /* Force 1000 ( required for enabling PHY regs configuration) */
- e1e_wphy(hw, 0x0000, 0x0140);
- /* Set upd_freq to 6 */
- e1e_wphy(hw, 0x1F30, 0x1606);
- /* Disable NPDFE */
- e1e_wphy(hw, 0x1F31, 0xB814);
- /* Disable adaptive fixed FFE (Default) */
- e1e_wphy(hw, 0x1F35, 0x002A);
- /* Enable FFE hysteresis */
- e1e_wphy(hw, 0x1F3E, 0x0067);
- /* Fixed FFE for short cable lengths */
- e1e_wphy(hw, 0x1F54, 0x0065);
- /* Fixed FFE for medium cable lengths */
- e1e_wphy(hw, 0x1F55, 0x002A);
- /* Fixed FFE for long cable lengths */
- e1e_wphy(hw, 0x1F56, 0x002A);
- /* Enable Adaptive Clip Threshold */
- e1e_wphy(hw, 0x1F72, 0x3FB0);
- /* AHT reset limit to 1 */
- e1e_wphy(hw, 0x1F76, 0xC0FF);
- /* Set AHT master delay to 127 msec */
- e1e_wphy(hw, 0x1F77, 0x1DEC);
- /* Set scan bits for AHT */
- e1e_wphy(hw, 0x1F78, 0xF9EF);
- /* Set AHT Preset bits */
- e1e_wphy(hw, 0x1F79, 0x0210);
- /* Change integ_factor of channel A to 3 */
- e1e_wphy(hw, 0x1895, 0x0003);
- /* Change prop_factor of channels BCD to 8 */
- e1e_wphy(hw, 0x1796, 0x0008);
- /* Change cg_icount + enable integbp for channels BCD */
- e1e_wphy(hw, 0x1798, 0xD008);
- /*
- * Change cg_icount + enable integbp + change prop_factor_master
- * to 8 for channel A
- */
- e1e_wphy(hw, 0x1898, 0xD918);
- /* Disable AHT in Slave mode on channel A */
- e1e_wphy(hw, 0x187A, 0x0800);
- /*
- * Enable LPLU and disable AN to 1000 in non-D0a states,
- * Enable SPD+B2B
- */
- e1e_wphy(hw, 0x0019, 0x008D);
- /* Enable restart AN on an1000_dis change */
- e1e_wphy(hw, 0x001B, 0x2080);
- /* Enable wh_fifo read clock in 10/100 modes */
- e1e_wphy(hw, 0x0014, 0x0045);
- /* Restart AN, Speed selection is 1000 */
- e1e_wphy(hw, 0x0000, 0x1340);
-
- return 0;
-}
-
-/* Internal function pointers */
-
-/**
- * e1000_get_phy_cfg_done - Generic PHY configuration done
- * @hw: pointer to the HW structure
- *
- * Return success if silicon family did not implement a family specific
- * get_cfg_done function.
- **/
-static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
-{
- if (hw->phy.ops.get_cfg_done)
- return hw->phy.ops.get_cfg_done(hw);
-
- return 0;
-}
-
-/**
- * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex
- * @hw: pointer to the HW structure
- *
- * When the silicon family has not implemented a forced speed/duplex
- * function for the PHY, simply return 0.
- **/
-static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
-{
- if (hw->phy.ops.force_speed_duplex)
- return hw->phy.ops.force_speed_duplex(hw);
-
- return 0;
-}
-
-/**
- * e1000e_get_phy_type_from_id - Get PHY type from id
- * @phy_id: phy_id read from the phy
- *
- * Returns the phy type from the id.
- **/
-enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
-{
- enum e1000_phy_type phy_type = e1000_phy_unknown;
-
- switch (phy_id) {
- case M88E1000_I_PHY_ID:
- case M88E1000_E_PHY_ID:
- case M88E1111_I_PHY_ID:
- case M88E1011_I_PHY_ID:
- phy_type = e1000_phy_m88;
- break;
- case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
- phy_type = e1000_phy_igp_2;
- break;
- case GG82563_E_PHY_ID:
- phy_type = e1000_phy_gg82563;
- break;
- case IGP03E1000_E_PHY_ID:
- phy_type = e1000_phy_igp_3;
- break;
- case IFE_E_PHY_ID:
- case IFE_PLUS_E_PHY_ID:
- case IFE_C_E_PHY_ID:
- phy_type = e1000_phy_ife;
- break;
- case BME1000_E_PHY_ID:
- case BME1000_E_PHY_ID_R2:
- phy_type = e1000_phy_bm;
- break;
- case I82578_E_PHY_ID:
- phy_type = e1000_phy_82578;
- break;
- case I82577_E_PHY_ID:
- phy_type = e1000_phy_82577;
- break;
- case I82579_E_PHY_ID:
- phy_type = e1000_phy_82579;
- break;
- default:
- phy_type = e1000_phy_unknown;
- break;
- }
- return phy_type;
-}
-
-/**
- * e1000e_determine_phy_address - Determines PHY address.
- * @hw: pointer to the HW structure
- *
- * This uses a trial and error method to loop through possible PHY
- * addresses. It tests each by reading the PHY ID registers and
- * checking for a match.
- **/
-s32 e1000e_determine_phy_address(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_PHY_TYPE;
- u32 phy_addr = 0;
- u32 i;
- enum e1000_phy_type phy_type = e1000_phy_unknown;
-
- hw->phy.id = phy_type;
-
- for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
- hw->phy.addr = phy_addr;
- i = 0;
-
- do {
- e1000e_get_phy_id(hw);
- phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
-
- /*
- * If phy_type is valid, break - we found our
- * PHY address
- */
- if (phy_type != e1000_phy_unknown) {
- ret_val = 0;
- goto out;
- }
- usleep_range(1000, 2000);
- i++;
- } while (i < 10);
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
- * @page: page to access
- *
- * Returns the phy address for the page requested.
- **/
-static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
-{
- u32 phy_addr = 2;
-
- if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
- phy_addr = 1;
-
- return phy_addr;
-}
-
-/**
- * e1000e_write_phy_reg_bm - Write BM PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val;
- u32 page = offset >> IGP_PAGE_SHIFT;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
- false, false);
- goto out;
- }
-
- hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- u32 page_shift, page_select;
-
- /*
- * Page select is register 31 for phy address 1 and 22 for
- * phy address 2 and 3. Page select is shifted only for
- * phy address 1.
- */
- if (hw->phy.addr == 1) {
- page_shift = IGP_PAGE_SHIFT;
- page_select = IGP01E1000_PHY_PAGE_SELECT;
- } else {
- page_shift = 0;
- page_select = BM_PHY_PAGE_SELECT;
- }
-
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
- if (ret_val)
- goto out;
- }
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-out:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * e1000e_read_phy_reg_bm - Read BM PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
- * semaphores before exiting.
- **/
-s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val;
- u32 page = offset >> IGP_PAGE_SHIFT;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
- true, false);
- goto out;
- }
-
- hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- u32 page_shift, page_select;
-
- /*
- * Page select is register 31 for phy address 1 and 22 for
- * phy address 2 and 3. Page select is shifted only for
- * phy address 1.
- */
- if (hw->phy.addr == 1) {
- page_shift = IGP_PAGE_SHIFT;
- page_select = IGP01E1000_PHY_PAGE_SELECT;
- } else {
- page_shift = 0;
- page_select = BM_PHY_PAGE_SELECT;
- }
-
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
- (page << page_shift));
- if (ret_val)
- goto out;
- }
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-out:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * e1000e_read_phy_reg_bm2 - Read BM PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
- * semaphores before exiting.
- **/
-s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val;
- u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
- true, false);
- goto out;
- }
-
- hw->phy.addr = 1;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
-
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
- page);
-
- if (ret_val)
- goto out;
- }
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-out:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * e1000e_write_phy_reg_bm2 - Write BM PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val;
- u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
- false, false);
- goto out;
- }
-
- hw->phy.addr = 1;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
- page);
-
- if (ret_val)
- goto out;
- }
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
-out:
- hw->phy.ops.release(hw);
- return ret_val;
-}
-
-/**
- * e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
- * @hw: pointer to the HW structure
- * @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
- *
- * Assumes semaphore already acquired and phy_reg points to a valid memory
- * address to store contents of the BM_WUC_ENABLE_REG register.
- **/
-s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
-{
- s32 ret_val;
- u16 temp;
-
- /* All page select, port ctrl and wakeup registers use phy address 1 */
- hw->phy.addr = 1;
-
- /* Select Port Control Registers page */
- ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val) {
- e_dbg("Could not set Port Control page\n");
- goto out;
- }
-
- ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
- if (ret_val) {
- e_dbg("Could not read PHY register %d.%d\n",
- BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
- goto out;
- }
-
- /*
- * Enable both PHY wakeup mode and Wakeup register page writes.
- * Prevent a power state change by disabling ME and Host PHY wakeup.
- */
- temp = *phy_reg;
- temp |= BM_WUC_ENABLE_BIT;
- temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
-
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
- if (ret_val) {
- e_dbg("Could not write PHY register %d.%d\n",
- BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
- goto out;
- }
-
- /* Select Host Wakeup Registers page */
- ret_val = e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
-
- /* caller now able to write registers on the Wakeup registers page */
-out:
- return ret_val;
-}
-
-/**
- * e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
- * @hw: pointer to the HW structure
- * @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
- *
- * Restore BM_WUC_ENABLE_REG to its original value.
- *
- * Assumes semaphore already acquired and *phy_reg is the contents of the
- * BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
- * caller.
- **/
-s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
-{
- s32 ret_val = 0;
-
- /* Select Port Control Registers page */
- ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
- if (ret_val) {
- e_dbg("Could not set Port Control page\n");
- goto out;
- }
-
- /* Restore 769.17 to its original value */
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
- if (ret_val)
- e_dbg("Could not restore PHY register %d.%d\n",
- BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
-out:
- return ret_val;
-}
-
-/**
- * e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read or written
- * @data: pointer to the data to read or write
- * @read: determines if operation is read or write
- * @page_set: BM_WUC_PAGE already set and access enabled
- *
- * Read the PHY register at offset and store the retrieved information in
- * data, or write data to PHY register at offset. Note the procedure to
- * access the PHY wakeup registers is different than reading the other PHY
- * registers. It works as such:
- * 1) Set 769.17.2 (page 769, register 17, bit 2) = 1
- * 2) Set page to 800 for host (801 if we were manageability)
- * 3) Write the address using the address opcode (0x11)
- * 4) Read or write the data using the data opcode (0x12)
- * 5) Restore 769.17.2 to its original value
- *
- * Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
- * step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
- *
- * Assumes semaphore is already acquired. When page_set==true, assumes
- * the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
- * is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
- **/
-static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read, bool page_set)
-{
- s32 ret_val;
- u16 reg = BM_PHY_REG_NUM(offset);
- u16 page = BM_PHY_REG_PAGE(offset);
- u16 phy_reg = 0;
-
- /* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
- if ((hw->mac.type == e1000_pchlan) &&
- (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
- e_dbg("Attempting to access page %d while gig enabled.\n",
- page);
-
- if (!page_set) {
- /* Enable access to PHY wakeup registers */
- ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
- if (ret_val) {
- e_dbg("Could not enable PHY wakeup reg access\n");
- goto out;
- }
- }
-
- e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
-
- /* Write the Wakeup register page offset value using opcode 0x11 */
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
- if (ret_val) {
- e_dbg("Could not write address opcode to page %d\n", page);
- goto out;
- }
-
- if (read) {
- /* Read the Wakeup register page value using opcode 0x12 */
- ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- data);
- } else {
- /* Write the Wakeup register page value using opcode 0x12 */
- ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
- *data);
- }
-
- if (ret_val) {
- e_dbg("Could not access PHY reg %d.%d\n", page, reg);
- goto out;
- }
-
- if (!page_set)
- ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, restore the link to previous
- * settings.
- **/
-void e1000_power_up_phy_copper(struct e1000_hw *hw)
-{
- u16 mii_reg = 0;
-
- /* The PHY will retain its settings across a power down/up cycle */
- e1e_rphy(hw, PHY_CONTROL, &mii_reg);
- mii_reg &= ~MII_CR_POWER_DOWN;
- e1e_wphy(hw, PHY_CONTROL, mii_reg);
-}
-
-/**
- * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, restore the link to previous
- * settings.
- **/
-void e1000_power_down_phy_copper(struct e1000_hw *hw)
-{
- u16 mii_reg = 0;
-
- /* The PHY will retain its settings across a power down/up cycle */
- e1e_rphy(hw, PHY_CONTROL, &mii_reg);
- mii_reg |= MII_CR_POWER_DOWN;
- e1e_wphy(hw, PHY_CONTROL, mii_reg);
- usleep_range(1000, 2000);
-}
-
-/**
- * e1000e_commit_phy - Soft PHY reset
- * @hw: pointer to the HW structure
- *
- * Performs a soft PHY reset on those that apply. This is a function pointer
- * entry point called by drivers.
- **/
-s32 e1000e_commit_phy(struct e1000_hw *hw)
-{
- if (hw->phy.ops.commit)
- return hw->phy.ops.commit(hw);
-
- return 0;
-}
-
-/**
- * e1000_set_d0_lplu_state - Sets low power link up state for D0
- * @hw: pointer to the HW structure
- * @active: boolean used to enable/disable lplu
- *
- * Success returns 0, Failure returns 1
- *
- * The low power link up (lplu) state is set to the power management level D0
- * and SmartSpeed is disabled when active is true, else clear lplu for D0
- * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
- * is used during Dx states where the power conservation is most important.
- * During driver activity, SmartSpeed should be enabled so performance is
- * maintained. This is a function pointer entry point called by drivers.
- **/
-static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
-{
- if (hw->phy.ops.set_d0_lplu_state)
- return hw->phy.ops.set_d0_lplu_state(hw, active);
-
- return 0;
-}
-
-/**
- * __e1000_read_phy_reg_hv - Read HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and stores the retrieved information in data. Release any acquired
- * semaphore before exiting.
- **/
-static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
- bool locked, bool page_set)
-{
- s32 ret_val;
- u16 page = BM_PHY_REG_PAGE(offset);
- u16 reg = BM_PHY_REG_NUM(offset);
- u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
-
- if (!locked) {
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
- true, page_set);
- goto out;
- }
-
- if (page > 0 && page < HV_INTC_FC_PAGE_START) {
- ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- data, true);
- goto out;
- }
-
- if (!page_set) {
- if (page == HV_INTC_FC_PAGE_START)
- page = 0;
-
- if (reg > MAX_PHY_MULTI_PAGE_REG) {
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000_set_page_igp(hw,
- (page << IGP_PAGE_SHIFT));
-
- hw->phy.addr = phy_addr;
-
- if (ret_val)
- goto out;
- }
- }
-
- e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
- page << IGP_PAGE_SHIFT, reg);
-
- ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
-out:
- if (!locked)
- hw->phy.ops.release(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_read_phy_reg_hv - Read HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore then reads the PHY register at offset and stores
- * the retrieved information in data. Release the acquired semaphore
- * before exiting.
- **/
-s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
-}
-
-/**
- * e1000_read_phy_reg_hv_locked - Read HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the PHY register at offset and stores the retrieved information
- * in data. Assumes semaphore already acquired.
- **/
-s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
-}
-
-/**
- * e1000_read_phy_reg_page_hv - Read HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Reads the PHY register at offset and stores the retrieved information
- * in data. Assumes semaphore already acquired and page already set.
- **/
-s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
-}
-
-/**
- * __e1000_write_phy_reg_hv - Write HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- * @locked: semaphore has already been acquired or not
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
- bool locked, bool page_set)
-{
- s32 ret_val;
- u16 page = BM_PHY_REG_PAGE(offset);
- u16 reg = BM_PHY_REG_NUM(offset);
- u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
-
- if (!locked) {
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- return ret_val;
- }
-
- /* Page 800 works differently than the rest so it has its own func */
- if (page == BM_WUC_PAGE) {
- ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
- false, page_set);
- goto out;
- }
-
- if (page > 0 && page < HV_INTC_FC_PAGE_START) {
- ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
- &data, false);
- goto out;
- }
-
- if (!page_set) {
- if (page == HV_INTC_FC_PAGE_START)
- page = 0;
-
- /*
- * Workaround MDIO accesses being disabled after entering IEEE
- * Power Down (when bit 11 of the PHY Control register is set)
- */
- if ((hw->phy.type == e1000_phy_82578) &&
- (hw->phy.revision >= 1) &&
- (hw->phy.addr == 2) &&
- ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
- u16 data2 = 0x7EFF;
- ret_val = e1000_access_phy_debug_regs_hv(hw,
- (1 << 6) | 0x3,
- &data2, false);
- if (ret_val)
- goto out;
- }
-
- if (reg > MAX_PHY_MULTI_PAGE_REG) {
- /* Page is shifted left, PHY expects (page x 32) */
- ret_val = e1000_set_page_igp(hw,
- (page << IGP_PAGE_SHIFT));
-
- hw->phy.addr = phy_addr;
-
- if (ret_val)
- goto out;
- }
- }
-
- e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
- page << IGP_PAGE_SHIFT, reg);
-
- ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
- data);
-
-out:
- if (!locked)
- hw->phy.ops.release(hw);
-
- return ret_val;
-}
-
-/**
- * e1000_write_phy_reg_hv - Write HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore then writes the data to PHY register at the offset.
- * Release the acquired semaphores before exiting.
- **/
-s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
-}
-
-/**
- * e1000_write_phy_reg_hv_locked - Write HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes the data to PHY register at the offset. Assumes semaphore
- * already acquired.
- **/
-s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
-}
-
-/**
- * e1000_write_phy_reg_page_hv - Write HV PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes the data to PHY register at the offset. Assumes semaphore
- * already acquired and page already set.
- **/
-s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
-{
- return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
-}
-
-/**
- * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
- * @page: page to be accessed
- **/
-static u32 e1000_get_phy_addr_for_hv_page(u32 page)
-{
- u32 phy_addr = 2;
-
- if (page >= HV_INTC_FC_PAGE_START)
- phy_addr = 1;
-
- return phy_addr;
-}
-
-/**
- * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
- * @hw: pointer to the HW structure
- * @offset: register offset to be read or written
- * @data: pointer to the data to be read or written
- * @read: determines if operation is read or write
- *
- * Reads the PHY register at offset and stores the retreived information
- * in data. Assumes semaphore already acquired. Note that the procedure
- * to access these regs uses the address port and data port to read/write.
- * These accesses done with PHY address 2 and without using pages.
- **/
-static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
- u16 *data, bool read)
-{
- s32 ret_val;
- u32 addr_reg = 0;
- u32 data_reg = 0;
-
- /* This takes care of the difference with desktop vs mobile phy */
- addr_reg = (hw->phy.type == e1000_phy_82578) ?
- I82578_ADDR_REG : I82577_ADDR_REG;
- data_reg = addr_reg + 1;
-
- /* All operations in this function are phy address 2 */
- hw->phy.addr = 2;
-
- /* masking with 0x3F to remove the page from offset */
- ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
- if (ret_val) {
- e_dbg("Could not write the Address Offset port register\n");
- goto out;
- }
-
- /* Read or write the data value next */
- if (read)
- ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
- else
- ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
-
- if (ret_val) {
- e_dbg("Could not access the Data port register\n");
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_link_stall_workaround_hv - Si workaround
- * @hw: pointer to the HW structure
- *
- * This function works around a Si bug where the link partner can get
- * a link up indication before the PHY does. If small packets are sent
- * by the link partner they can be placed in the packet buffer without
- * being properly accounted for by the PHY and will stall preventing
- * further packets from being received. The workaround is to clear the
- * packet buffer after the PHY detects link up.
- **/
-s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 data;
-
- if (hw->phy.type != e1000_phy_82578)
- goto out;
-
- /* Do not apply workaround if in PHY loopback bit 14 set */
- e1e_rphy(hw, PHY_CONTROL, &data);
- if (data & PHY_CONTROL_LB)
- goto out;
-
- /* check if link is up and at 1Gbps */
- ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
- if (ret_val)
- goto out;
-
- data &= BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_MASK;
-
- if (data != (BM_CS_STATUS_LINK_UP |
- BM_CS_STATUS_RESOLVED |
- BM_CS_STATUS_SPEED_1000))
- goto out;
-
- mdelay(200);
-
- /* flush the packets in the fifo buffer */
- ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
- HV_MUX_DATA_CTRL_FORCE_SPEED);
- if (ret_val)
- goto out;
-
- ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_check_polarity_82577 - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY specific status register.
- **/
-s32 e1000_check_polarity_82577(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex.
- **/
-s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- goto out;
-
- e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- goto out;
-
- udelay(1);
-
- if (phy->autoneg_wait_to_complete) {
- e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
-
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
-
- if (!link)
- e_dbg("Link taking longer than expected.\n");
-
- /* Try once more */
- ret_val = e1000e_phy_has_link_generic(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_get_phy_info_82577 - Retrieve I82577 PHY information
- * @hw: pointer to the HW structure
- *
- * Read PHY status to determine if link is up. If link is up, then
- * set/determine 10base-T extended distance and polarity correction. Read
- * PHY port status to determine MDI/MDIx and speed. Based on the speed,
- * determine on the cable length, local and remote receiver.
- **/
-s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
- ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- e_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- phy->polarity_correction = true;
-
- ret_val = e1000_check_polarity_82577(hw);
- if (ret_val)
- goto out;
-
- ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
- if (ret_val)
- goto out;
-
- phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
-
- if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
- I82577_PHY_STATUS2_SPEED_1000MBPS) {
- ret_val = hw->phy.ops.get_cable_length(hw);
- if (ret_val)
- goto out;
-
- ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
- if (ret_val)
- goto out;
-
- phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
- * @hw: pointer to the HW structure
- *
- * Reads the diagnostic status register and verifies result is valid before
- * placing it in the phy_cable_length field.
- **/
-s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, length;
-
- ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
- I82577_DSTATUS_CABLE_LENGTH_SHIFT;
-
- if (length == E1000_CABLE_LENGTH_UNDEFINED)
- ret_val = -E1000_ERR_PHY;
-
- phy->cable_length = length;
-
-out:
- return ret_val;
-}
source "drivers/net/ethernet/amd/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/intel/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
--- /dev/null
+#
+# Intel network device configuration
+#
+
+config NET_VENDOR_INTEL
+ bool "Intel devices"
+ depends on PCI || PCI_MSI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Intel cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_INTEL
+
+config E100
+ tristate "Intel(R) PRO/100+ support"
+ depends on PCI
+ select MII
+ ---help---
+ This driver supports Intel(R) PRO/100 family of adapters.
+ To verify that your adapter is supported, find the board ID number
+ on the adapter. Look for a label that has a barcode and a number
+ in the format 123456-001 (six digits hyphen three digits).
+
+ Use the above information and the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ to identify the adapter.
+
+ For the latest Intel PRO/100 network driver for Linux, see:
+
+ <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e100.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e100.
+
+config E1000
+ tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/1000 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000.
+
+config E1000E
+ tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
+ depends on PCI && (!SPARC32 || BROKEN)
+ select CRC32
+ ---help---
+ This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
+ ethernet family of adapters. For PCI or PCI-X e1000 adapters,
+ use the regular e1000 driver For more information on how to
+ identify your adapter, go to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called e1000e.
+
+config IGB
+ tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82575/82576 gigabit ethernet family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igb.
+
+config IGB_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IGBVF
+ tristate "Intel(R) 82576 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82576 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/e1000.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called igbvf.
+
+config IXGB
+ tristate "Intel(R) PRO/10GbE support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) PRO/10GbE family of adapters for
+ PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
+ instead. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgb.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgb.
+
+config IXGBE
+ tristate "Intel(R) 10GbE PCI Express adapters support"
+ depends on PCI && INET
+ select MDIO
+ ---help---
+ This driver supports Intel(R) 10GbE PCI Express family of
+ adapters. For more information on how to identify your adapter, go
+ to the Adapter & Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbe.
+
+config IXGBE_DCA
+ bool "Direct Cache Access (DCA) Support"
+ default y
+ depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
+
+config IXGBE_DCB
+ bool "Data Center Bridging (DCB) Support"
+ default n
+ depends on IXGBE && DCB
+ ---help---
+ Say Y here if you want to use Data Center Bridging (DCB) in the
+ driver.
+
+ If unsure, say N.
+
+config IXGBEVF
+ tristate "Intel(R) 82599 Virtual Function Ethernet support"
+ depends on PCI_MSI
+ ---help---
+ This driver supports Intel(R) 82599 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/sb/CS-008441.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgbevf.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf. MSI-X interrupt support is required
+ for this driver to work correctly.
+
+endif # NET_VENDOR_INTEL
--- /dev/null
+#
+# Makefile for the Intel network device drivers.
+#
+
+obj-$(CONFIG_E100) += e100.o
+obj-$(CONFIG_E1000) += e1000/
+obj-$(CONFIG_E1000E) += e1000e/
+obj-$(CONFIG_IGB) += igb/
+obj-$(CONFIG_IGBVF) += igbvf/
+obj-$(CONFIG_IXGBE) += ixgbe/
+obj-$(CONFIG_IXGBEVF) += ixgbevf/
+obj-$(CONFIG_IXGB) += ixgb/
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/100 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * e100.c: Intel(R) PRO/100 ethernet driver
+ *
+ * (Re)written 2003 by scott.feldman@intel.com. Based loosely on
+ * original e100 driver, but better described as a munging of
+ * e100, e1000, eepro100, tg3, 8139cp, and other drivers.
+ *
+ * References:
+ * Intel 8255x 10/100 Mbps Ethernet Controller Family,
+ * Open Source Software Developers Manual,
+ * http://sourceforge.net/projects/e1000
+ *
+ *
+ * Theory of Operation
+ *
+ * I. General
+ *
+ * The driver supports Intel(R) 10/100 Mbps PCI Fast Ethernet
+ * controller family, which includes the 82557, 82558, 82559, 82550,
+ * 82551, and 82562 devices. 82558 and greater controllers
+ * integrate the Intel 82555 PHY. The controllers are used in
+ * server and client network interface cards, as well as in
+ * LAN-On-Motherboard (LOM), CardBus, MiniPCI, and ICHx
+ * configurations. 8255x supports a 32-bit linear addressing
+ * mode and operates at 33Mhz PCI clock rate.
+ *
+ * II. Driver Operation
+ *
+ * Memory-mapped mode is used exclusively to access the device's
+ * shared-memory structure, the Control/Status Registers (CSR). All
+ * setup, configuration, and control of the device, including queuing
+ * of Tx, Rx, and configuration commands is through the CSR.
+ * cmd_lock serializes accesses to the CSR command register. cb_lock
+ * protects the shared Command Block List (CBL).
+ *
+ * 8255x is highly MII-compliant and all access to the PHY go
+ * through the Management Data Interface (MDI). Consequently, the
+ * driver leverages the mii.c library shared with other MII-compliant
+ * devices.
+ *
+ * Big- and Little-Endian byte order as well as 32- and 64-bit
+ * archs are supported. Weak-ordered memory and non-cache-coherent
+ * archs are supported.
+ *
+ * III. Transmit
+ *
+ * A Tx skb is mapped and hangs off of a TCB. TCBs are linked
+ * together in a fixed-size ring (CBL) thus forming the flexible mode
+ * memory structure. A TCB marked with the suspend-bit indicates
+ * the end of the ring. The last TCB processed suspends the
+ * controller, and the controller can be restarted by issue a CU
+ * resume command to continue from the suspend point, or a CU start
+ * command to start at a given position in the ring.
+ *
+ * Non-Tx commands (config, multicast setup, etc) are linked
+ * into the CBL ring along with Tx commands. The common structure
+ * used for both Tx and non-Tx commands is the Command Block (CB).
+ *
+ * cb_to_use is the next CB to use for queuing a command; cb_to_clean
+ * is the next CB to check for completion; cb_to_send is the first
+ * CB to start on in case of a previous failure to resume. CB clean
+ * up happens in interrupt context in response to a CU interrupt.
+ * cbs_avail keeps track of number of free CB resources available.
+ *
+ * Hardware padding of short packets to minimum packet size is
+ * enabled. 82557 pads with 7Eh, while the later controllers pad
+ * with 00h.
+ *
+ * IV. Receive
+ *
+ * The Receive Frame Area (RFA) comprises a ring of Receive Frame
+ * Descriptors (RFD) + data buffer, thus forming the simplified mode
+ * memory structure. Rx skbs are allocated to contain both the RFD
+ * and the data buffer, but the RFD is pulled off before the skb is
+ * indicated. The data buffer is aligned such that encapsulated
+ * protocol headers are u32-aligned. Since the RFD is part of the
+ * mapped shared memory, and completion status is contained within
+ * the RFD, the RFD must be dma_sync'ed to maintain a consistent
+ * view from software and hardware.
+ *
+ * In order to keep updates to the RFD link field from colliding with
+ * hardware writes to mark packets complete, we use the feature that
+ * hardware will not write to a size 0 descriptor and mark the previous
+ * packet as end-of-list (EL). After updating the link, we remove EL
+ * and only then restore the size such that hardware may use the
+ * previous-to-end RFD.
+ *
+ * Under typical operation, the receive unit (RU) is start once,
+ * and the controller happily fills RFDs as frames arrive. If
+ * replacement RFDs cannot be allocated, or the RU goes non-active,
+ * the RU must be restarted. Frame arrival generates an interrupt,
+ * and Rx indication and re-allocation happen in the same context,
+ * therefore no locking is required. A software-generated interrupt
+ * is generated from the watchdog to recover from a failed allocation
+ * scenario where all Rx resources have been indicated and none re-
+ * placed.
+ *
+ * V. Miscellaneous
+ *
+ * VLAN offloading of tagging, stripping and filtering is not
+ * supported, but driver will accommodate the extra 4-byte VLAN tag
+ * for processing by upper layers. Tx/Rx Checksum offloading is not
+ * supported. Tx Scatter/Gather is not supported. Jumbo Frames is
+ * not supported (hardware limitation).
+ *
+ * MagicPacket(tm) WoL support is enabled/disabled via ethtool.
+ *
+ * Thanks to JC (jchapman@katalix.com) for helping with
+ * testing/troubleshooting the development driver.
+ *
+ * TODO:
+ * o several entry points race with dev->close
+ * o check for tx-no-resources/stop Q races with tx clean/wake Q
+ *
+ * FIXES:
+ * 2005/12/02 - Michael O'Donnell <Michael.ODonnell at stratus dot com>
+ * - Stratus87247: protect MDI control register manipulations
+ * 2009/06/01 - Andreas Mohr <andi at lisas dot de>
+ * - add clean lowlevel I/O emulation for cards with MII-lacking PHYs
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/hardirq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/string.h>
+#include <linux/firmware.h>
+#include <linux/rtnetlink.h>
+#include <asm/unaligned.h>
+
+
+#define DRV_NAME "e100"
+#define DRV_EXT "-NAPI"
+#define DRV_VERSION "3.5.24-k2"DRV_EXT
+#define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver"
+#define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation"
+
+#define E100_WATCHDOG_PERIOD (2 * HZ)
+#define E100_NAPI_WEIGHT 16
+
+#define FIRMWARE_D101M "e100/d101m_ucode.bin"
+#define FIRMWARE_D101S "e100/d101s_ucode.bin"
+#define FIRMWARE_D102E "e100/d102e_ucode.bin"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR(DRV_COPYRIGHT);
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_FIRMWARE(FIRMWARE_D101M);
+MODULE_FIRMWARE(FIRMWARE_D101S);
+MODULE_FIRMWARE(FIRMWARE_D102E);
+
+static int debug = 3;
+static int eeprom_bad_csum_allow = 0;
+static int use_io = 0;
+module_param(debug, int, 0);
+module_param(eeprom_bad_csum_allow, int, 0);
+module_param(use_io, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+MODULE_PARM_DESC(eeprom_bad_csum_allow, "Allow bad eeprom checksums");
+MODULE_PARM_DESC(use_io, "Force use of i/o access mode");
+
+#define INTEL_8255X_ETHERNET_DEVICE(device_id, ich) {\
+ PCI_VENDOR_ID_INTEL, device_id, PCI_ANY_ID, PCI_ANY_ID, \
+ PCI_CLASS_NETWORK_ETHERNET << 8, 0xFFFF00, ich }
+static DEFINE_PCI_DEVICE_TABLE(e100_id_table) = {
+ INTEL_8255X_ETHERNET_DEVICE(0x1029, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1030, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1031, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1032, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1033, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1034, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1038, 3),
+ INTEL_8255X_ETHERNET_DEVICE(0x1039, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103A, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103B, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103C, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103D, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x103E, 4),
+ INTEL_8255X_ETHERNET_DEVICE(0x1050, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1051, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1052, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1053, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1054, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1055, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1056, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1057, 5),
+ INTEL_8255X_ETHERNET_DEVICE(0x1059, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1064, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1065, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1066, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1067, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1068, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1069, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106A, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x106B, 6),
+ INTEL_8255X_ETHERNET_DEVICE(0x1091, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1092, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1093, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1094, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1095, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x10fe, 7),
+ INTEL_8255X_ETHERNET_DEVICE(0x1209, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x1229, 0),
+ INTEL_8255X_ETHERNET_DEVICE(0x2449, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x2459, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x245D, 2),
+ INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7),
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, e100_id_table);
+
+enum mac {
+ mac_82557_D100_A = 0,
+ mac_82557_D100_B = 1,
+ mac_82557_D100_C = 2,
+ mac_82558_D101_A4 = 4,
+ mac_82558_D101_B0 = 5,
+ mac_82559_D101M = 8,
+ mac_82559_D101S = 9,
+ mac_82550_D102 = 12,
+ mac_82550_D102_C = 13,
+ mac_82551_E = 14,
+ mac_82551_F = 15,
+ mac_82551_10 = 16,
+ mac_unknown = 0xFF,
+};
+
+enum phy {
+ phy_100a = 0x000003E0,
+ phy_100c = 0x035002A8,
+ phy_82555_tx = 0x015002A8,
+ phy_nsc_tx = 0x5C002000,
+ phy_82562_et = 0x033002A8,
+ phy_82562_em = 0x032002A8,
+ phy_82562_ek = 0x031002A8,
+ phy_82562_eh = 0x017002A8,
+ phy_82552_v = 0xd061004d,
+ phy_unknown = 0xFFFFFFFF,
+};
+
+/* CSR (Control/Status Registers) */
+struct csr {
+ struct {
+ u8 status;
+ u8 stat_ack;
+ u8 cmd_lo;
+ u8 cmd_hi;
+ u32 gen_ptr;
+ } scb;
+ u32 port;
+ u16 flash_ctrl;
+ u8 eeprom_ctrl_lo;
+ u8 eeprom_ctrl_hi;
+ u32 mdi_ctrl;
+ u32 rx_dma_count;
+};
+
+enum scb_status {
+ rus_no_res = 0x08,
+ rus_ready = 0x10,
+ rus_mask = 0x3C,
+};
+
+enum ru_state {
+ RU_SUSPENDED = 0,
+ RU_RUNNING = 1,
+ RU_UNINITIALIZED = -1,
+};
+
+enum scb_stat_ack {
+ stat_ack_not_ours = 0x00,
+ stat_ack_sw_gen = 0x04,
+ stat_ack_rnr = 0x10,
+ stat_ack_cu_idle = 0x20,
+ stat_ack_frame_rx = 0x40,
+ stat_ack_cu_cmd_done = 0x80,
+ stat_ack_not_present = 0xFF,
+ stat_ack_rx = (stat_ack_sw_gen | stat_ack_rnr | stat_ack_frame_rx),
+ stat_ack_tx = (stat_ack_cu_idle | stat_ack_cu_cmd_done),
+};
+
+enum scb_cmd_hi {
+ irq_mask_none = 0x00,
+ irq_mask_all = 0x01,
+ irq_sw_gen = 0x02,
+};
+
+enum scb_cmd_lo {
+ cuc_nop = 0x00,
+ ruc_start = 0x01,
+ ruc_load_base = 0x06,
+ cuc_start = 0x10,
+ cuc_resume = 0x20,
+ cuc_dump_addr = 0x40,
+ cuc_dump_stats = 0x50,
+ cuc_load_base = 0x60,
+ cuc_dump_reset = 0x70,
+};
+
+enum cuc_dump {
+ cuc_dump_complete = 0x0000A005,
+ cuc_dump_reset_complete = 0x0000A007,
+};
+
+enum port {
+ software_reset = 0x0000,
+ selftest = 0x0001,
+ selective_reset = 0x0002,
+};
+
+enum eeprom_ctrl_lo {
+ eesk = 0x01,
+ eecs = 0x02,
+ eedi = 0x04,
+ eedo = 0x08,
+};
+
+enum mdi_ctrl {
+ mdi_write = 0x04000000,
+ mdi_read = 0x08000000,
+ mdi_ready = 0x10000000,
+};
+
+enum eeprom_op {
+ op_write = 0x05,
+ op_read = 0x06,
+ op_ewds = 0x10,
+ op_ewen = 0x13,
+};
+
+enum eeprom_offsets {
+ eeprom_cnfg_mdix = 0x03,
+ eeprom_phy_iface = 0x06,
+ eeprom_id = 0x0A,
+ eeprom_config_asf = 0x0D,
+ eeprom_smbus_addr = 0x90,
+};
+
+enum eeprom_cnfg_mdix {
+ eeprom_mdix_enabled = 0x0080,
+};
+
+enum eeprom_phy_iface {
+ NoSuchPhy = 0,
+ I82553AB,
+ I82553C,
+ I82503,
+ DP83840,
+ S80C240,
+ S80C24,
+ I82555,
+ DP83840A = 10,
+};
+
+enum eeprom_id {
+ eeprom_id_wol = 0x0020,
+};
+
+enum eeprom_config_asf {
+ eeprom_asf = 0x8000,
+ eeprom_gcl = 0x4000,
+};
+
+enum cb_status {
+ cb_complete = 0x8000,
+ cb_ok = 0x2000,
+};
+
+enum cb_command {
+ cb_nop = 0x0000,
+ cb_iaaddr = 0x0001,
+ cb_config = 0x0002,
+ cb_multi = 0x0003,
+ cb_tx = 0x0004,
+ cb_ucode = 0x0005,
+ cb_dump = 0x0006,
+ cb_tx_sf = 0x0008,
+ cb_cid = 0x1f00,
+ cb_i = 0x2000,
+ cb_s = 0x4000,
+ cb_el = 0x8000,
+};
+
+struct rfd {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ __le32 rbd;
+ __le16 actual_size;
+ __le16 size;
+};
+
+struct rx {
+ struct rx *next, *prev;
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+#define X(a,b) b,a
+#else
+#define X(a,b) a,b
+#endif
+struct config {
+/*0*/ u8 X(byte_count:6, pad0:2);
+/*1*/ u8 X(X(rx_fifo_limit:4, tx_fifo_limit:3), pad1:1);
+/*2*/ u8 adaptive_ifs;
+/*3*/ u8 X(X(X(X(mwi_enable:1, type_enable:1), read_align_enable:1),
+ term_write_cache_line:1), pad3:4);
+/*4*/ u8 X(rx_dma_max_count:7, pad4:1);
+/*5*/ u8 X(tx_dma_max_count:7, dma_max_count_enable:1);
+/*6*/ u8 X(X(X(X(X(X(X(late_scb_update:1, direct_rx_dma:1),
+ tno_intr:1), cna_intr:1), standard_tcb:1), standard_stat_counter:1),
+ rx_discard_overruns:1), rx_save_bad_frames:1);
+/*7*/ u8 X(X(X(X(X(rx_discard_short_frames:1, tx_underrun_retry:2),
+ pad7:2), rx_extended_rfd:1), tx_two_frames_in_fifo:1),
+ tx_dynamic_tbd:1);
+/*8*/ u8 X(X(mii_mode:1, pad8:6), csma_disabled:1);
+/*9*/ u8 X(X(X(X(X(rx_tcpudp_checksum:1, pad9:3), vlan_arp_tco:1),
+ link_status_wake:1), arp_wake:1), mcmatch_wake:1);
+/*10*/ u8 X(X(X(pad10:3, no_source_addr_insertion:1), preamble_length:2),
+ loopback:2);
+/*11*/ u8 X(linear_priority:3, pad11:5);
+/*12*/ u8 X(X(linear_priority_mode:1, pad12:3), ifs:4);
+/*13*/ u8 ip_addr_lo;
+/*14*/ u8 ip_addr_hi;
+/*15*/ u8 X(X(X(X(X(X(X(promiscuous_mode:1, broadcast_disabled:1),
+ wait_after_win:1), pad15_1:1), ignore_ul_bit:1), crc_16_bit:1),
+ pad15_2:1), crs_or_cdt:1);
+/*16*/ u8 fc_delay_lo;
+/*17*/ u8 fc_delay_hi;
+/*18*/ u8 X(X(X(X(X(rx_stripping:1, tx_padding:1), rx_crc_transfer:1),
+ rx_long_ok:1), fc_priority_threshold:3), pad18:1);
+/*19*/ u8 X(X(X(X(X(X(X(addr_wake:1, magic_packet_disable:1),
+ fc_disable:1), fc_restop:1), fc_restart:1), fc_reject:1),
+ full_duplex_force:1), full_duplex_pin:1);
+/*20*/ u8 X(X(X(pad20_1:5, fc_priority_location:1), multi_ia:1), pad20_2:1);
+/*21*/ u8 X(X(pad21_1:3, multicast_all:1), pad21_2:4);
+/*22*/ u8 X(X(rx_d102_mode:1, rx_vlan_drop:1), pad22:6);
+ u8 pad_d102[9];
+};
+
+#define E100_MAX_MULTICAST_ADDRS 64
+struct multi {
+ __le16 count;
+ u8 addr[E100_MAX_MULTICAST_ADDRS * ETH_ALEN + 2/*pad*/];
+};
+
+/* Important: keep total struct u32-aligned */
+#define UCODE_SIZE 134
+struct cb {
+ __le16 status;
+ __le16 command;
+ __le32 link;
+ union {
+ u8 iaaddr[ETH_ALEN];
+ __le32 ucode[UCODE_SIZE];
+ struct config config;
+ struct multi multi;
+ struct {
+ u32 tbd_array;
+ u16 tcb_byte_count;
+ u8 threshold;
+ u8 tbd_count;
+ struct {
+ __le32 buf_addr;
+ __le16 size;
+ u16 eol;
+ } tbd;
+ } tcb;
+ __le32 dump_buffer_addr;
+ } u;
+ struct cb *next, *prev;
+ dma_addr_t dma_addr;
+ struct sk_buff *skb;
+};
+
+enum loopback {
+ lb_none = 0, lb_mac = 1, lb_phy = 3,
+};
+
+struct stats {
+ __le32 tx_good_frames, tx_max_collisions, tx_late_collisions,
+ tx_underruns, tx_lost_crs, tx_deferred, tx_single_collisions,
+ tx_multiple_collisions, tx_total_collisions;
+ __le32 rx_good_frames, rx_crc_errors, rx_alignment_errors,
+ rx_resource_errors, rx_overrun_errors, rx_cdt_errors,
+ rx_short_frame_errors;
+ __le32 fc_xmt_pause, fc_rcv_pause, fc_rcv_unsupported;
+ __le16 xmt_tco_frames, rcv_tco_frames;
+ __le32 complete;
+};
+
+struct mem {
+ struct {
+ u32 signature;
+ u32 result;
+ } selftest;
+ struct stats stats;
+ u8 dump_buf[596];
+};
+
+struct param_range {
+ u32 min;
+ u32 max;
+ u32 count;
+};
+
+struct params {
+ struct param_range rfds;
+ struct param_range cbs;
+};
+
+struct nic {
+ /* Begin: frequently used values: keep adjacent for cache effect */
+ u32 msg_enable ____cacheline_aligned;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ u16 (*mdio_ctrl)(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data);
+
+ struct rx *rxs ____cacheline_aligned;
+ struct rx *rx_to_use;
+ struct rx *rx_to_clean;
+ struct rfd blank_rfd;
+ enum ru_state ru_running;
+
+ spinlock_t cb_lock ____cacheline_aligned;
+ spinlock_t cmd_lock;
+ struct csr __iomem *csr;
+ enum scb_cmd_lo cuc_cmd;
+ unsigned int cbs_avail;
+ struct napi_struct napi;
+ struct cb *cbs;
+ struct cb *cb_to_use;
+ struct cb *cb_to_send;
+ struct cb *cb_to_clean;
+ __le16 tx_command;
+ /* End: frequently used values: keep adjacent for cache effect */
+
+ enum {
+ ich = (1 << 0),
+ promiscuous = (1 << 1),
+ multicast_all = (1 << 2),
+ wol_magic = (1 << 3),
+ ich_10h_workaround = (1 << 4),
+ } flags ____cacheline_aligned;
+
+ enum mac mac;
+ enum phy phy;
+ struct params params;
+ struct timer_list watchdog;
+ struct mii_if_info mii;
+ struct work_struct tx_timeout_task;
+ enum loopback loopback;
+
+ struct mem *mem;
+ dma_addr_t dma_addr;
+
+ struct pci_pool *cbs_pool;
+ dma_addr_t cbs_dma_addr;
+ u8 adaptive_ifs;
+ u8 tx_threshold;
+ u32 tx_frames;
+ u32 tx_collisions;
+ u32 tx_deferred;
+ u32 tx_single_collisions;
+ u32 tx_multiple_collisions;
+ u32 tx_fc_pause;
+ u32 tx_tco_frames;
+
+ u32 rx_fc_pause;
+ u32 rx_fc_unsupported;
+ u32 rx_tco_frames;
+ u32 rx_over_length_errors;
+
+ u16 eeprom_wc;
+ __le16 eeprom[256];
+ spinlock_t mdio_lock;
+ const struct firmware *fw;
+};
+
+static inline void e100_write_flush(struct nic *nic)
+{
+ /* Flush previous PCI writes through intermediate bridges
+ * by doing a benign read */
+ (void)ioread8(&nic->csr->scb.status);
+}
+
+static void e100_enable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_none, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_disable_irq(struct nic *nic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+ iowrite8(irq_mask_all, &nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+}
+
+static void e100_hw_reset(struct nic *nic)
+{
+ /* Put CU and RU into idle with a selective reset to get
+ * device off of PCI bus */
+ iowrite32(selective_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Now fully reset device */
+ iowrite32(software_reset, &nic->csr->port);
+ e100_write_flush(nic); udelay(20);
+
+ /* Mask off our interrupt line - it's unmasked after reset */
+ e100_disable_irq(nic);
+}
+
+static int e100_self_test(struct nic *nic)
+{
+ u32 dma_addr = nic->dma_addr + offsetof(struct mem, selftest);
+
+ /* Passing the self-test is a pretty good indication
+ * that the device can DMA to/from host memory */
+
+ nic->mem->selftest.signature = 0;
+ nic->mem->selftest.result = 0xFFFFFFFF;
+
+ iowrite32(selftest | dma_addr, &nic->csr->port);
+ e100_write_flush(nic);
+ /* Wait 10 msec for self-test to complete */
+ msleep(10);
+
+ /* Interrupts are enabled after self-test */
+ e100_disable_irq(nic);
+
+ /* Check results of self-test */
+ if (nic->mem->selftest.result != 0) {
+ netif_err(nic, hw, nic->netdev,
+ "Self-test failed: result=0x%08X\n",
+ nic->mem->selftest.result);
+ return -ETIMEDOUT;
+ }
+ if (nic->mem->selftest.signature == 0) {
+ netif_err(nic, hw, nic->netdev, "Self-test failed: timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void e100_eeprom_write(struct nic *nic, u16 addr_len, u16 addr, __le16 data)
+{
+ u32 cmd_addr_data[3];
+ u8 ctrl;
+ int i, j;
+
+ /* Three cmds: write/erase enable, write data, write/erase disable */
+ cmd_addr_data[0] = op_ewen << (addr_len - 2);
+ cmd_addr_data[1] = (((op_write << addr_len) | addr) << 16) |
+ le16_to_cpu(data);
+ cmd_addr_data[2] = op_ewds << (addr_len - 2);
+
+ /* Bit-bang cmds to write word to eeprom */
+ for (j = 0; j < 3; j++) {
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data[j] & (1 << i)) ?
+ eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+ /* Wait 10 msec for cmd to complete */
+ msleep(10);
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+ }
+};
+
+/* General technique stolen from the eepro100 driver - very clever */
+static __le16 e100_eeprom_read(struct nic *nic, u16 *addr_len, u16 addr)
+{
+ u32 cmd_addr_data;
+ u16 data = 0;
+ u8 ctrl;
+ int i;
+
+ cmd_addr_data = ((op_read << *addr_len) | addr) << 16;
+
+ /* Chip select */
+ iowrite8(eecs | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Bit-bang to read word from eeprom */
+ for (i = 31; i >= 0; i--) {
+ ctrl = (cmd_addr_data & (1 << i)) ? eecs | eedi : eecs;
+ iowrite8(ctrl, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ iowrite8(ctrl | eesk, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ /* Eeprom drives a dummy zero to EEDO after receiving
+ * complete address. Use this to adjust addr_len. */
+ ctrl = ioread8(&nic->csr->eeprom_ctrl_lo);
+ if (!(ctrl & eedo) && i > 16) {
+ *addr_len -= (i - 16);
+ i = 17;
+ }
+
+ data = (data << 1) | (ctrl & eedo ? 1 : 0);
+ }
+
+ /* Chip deselect */
+ iowrite8(0, &nic->csr->eeprom_ctrl_lo);
+ e100_write_flush(nic); udelay(4);
+
+ return cpu_to_le16(data);
+};
+
+/* Load entire EEPROM image into driver cache and validate checksum */
+static int e100_eeprom_load(struct nic *nic)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ for (addr = 0; addr < nic->eeprom_wc; addr++) {
+ nic->eeprom[addr] = e100_eeprom_read(nic, &addr_len, addr);
+ if (addr < nic->eeprom_wc - 1)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ }
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ if (cpu_to_le16(0xBABA - checksum) != nic->eeprom[nic->eeprom_wc - 1]) {
+ netif_err(nic, probe, nic->netdev, "EEPROM corrupted\n");
+ if (!eeprom_bad_csum_allow)
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+/* Save (portion of) driver EEPROM cache to device and update checksum */
+static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
+{
+ u16 addr, addr_len = 8, checksum = 0;
+
+ /* Try reading with an 8-bit addr len to discover actual addr len */
+ e100_eeprom_read(nic, &addr_len, 0);
+ nic->eeprom_wc = 1 << addr_len;
+
+ if (start + count >= nic->eeprom_wc)
+ return -EINVAL;
+
+ for (addr = start; addr < start + count; addr++)
+ e100_eeprom_write(nic, addr_len, addr, nic->eeprom[addr]);
+
+ /* The checksum, stored in the last word, is calculated such that
+ * the sum of words should be 0xBABA */
+ for (addr = 0; addr < nic->eeprom_wc - 1; addr++)
+ checksum += le16_to_cpu(nic->eeprom[addr]);
+ nic->eeprom[nic->eeprom_wc - 1] = cpu_to_le16(0xBABA - checksum);
+ e100_eeprom_write(nic, addr_len, nic->eeprom_wc - 1,
+ nic->eeprom[nic->eeprom_wc - 1]);
+
+ return 0;
+}
+
+#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20 /* delay like the old code */
+static int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
+{
+ unsigned long flags;
+ unsigned int i;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cmd_lock, flags);
+
+ /* Previous command is accepted when SCB clears */
+ for (i = 0; i < E100_WAIT_SCB_TIMEOUT; i++) {
+ if (likely(!ioread8(&nic->csr->scb.cmd_lo)))
+ break;
+ cpu_relax();
+ if (unlikely(i > E100_WAIT_SCB_FAST))
+ udelay(5);
+ }
+ if (unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
+ err = -EAGAIN;
+ goto err_unlock;
+ }
+
+ if (unlikely(cmd != cuc_resume))
+ iowrite32(dma_addr, &nic->csr->scb.gen_ptr);
+ iowrite8(cmd, &nic->csr->scb.cmd_lo);
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cmd_lock, flags);
+
+ return err;
+}
+
+static int e100_exec_cb(struct nic *nic, struct sk_buff *skb,
+ void (*cb_prepare)(struct nic *, struct cb *, struct sk_buff *))
+{
+ struct cb *cb;
+ unsigned long flags;
+ int err = 0;
+
+ spin_lock_irqsave(&nic->cb_lock, flags);
+
+ if (unlikely(!nic->cbs_avail)) {
+ err = -ENOMEM;
+ goto err_unlock;
+ }
+
+ cb = nic->cb_to_use;
+ nic->cb_to_use = cb->next;
+ nic->cbs_avail--;
+ cb->skb = skb;
+
+ if (unlikely(!nic->cbs_avail))
+ err = -ENOSPC;
+
+ cb_prepare(nic, cb, skb);
+
+ /* Order is important otherwise we'll be in a race with h/w:
+ * set S-bit in current first, then clear S-bit in previous. */
+ cb->command |= cpu_to_le16(cb_s);
+ wmb();
+ cb->prev->command &= cpu_to_le16(~cb_s);
+
+ while (nic->cb_to_send != nic->cb_to_use) {
+ if (unlikely(e100_exec_cmd(nic, nic->cuc_cmd,
+ nic->cb_to_send->dma_addr))) {
+ /* Ok, here's where things get sticky. It's
+ * possible that we can't schedule the command
+ * because the controller is too busy, so
+ * let's just queue the command and try again
+ * when another command is scheduled. */
+ if (err == -ENOSPC) {
+ //request a reset
+ schedule_work(&nic->tx_timeout_task);
+ }
+ break;
+ } else {
+ nic->cuc_cmd = cuc_resume;
+ nic->cb_to_send = nic->cb_to_send->next;
+ }
+ }
+
+err_unlock:
+ spin_unlock_irqrestore(&nic->cb_lock, flags);
+
+ return err;
+}
+
+static int mdio_read(struct net_device *netdev, int addr, int reg)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->mdio_ctrl(nic, addr, mdi_read, reg, 0);
+}
+
+static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ nic->mdio_ctrl(nic, addr, mdi_write, reg, data);
+}
+
+/* the standard mdio_ctrl() function for usual MII-compliant hardware */
+static u16 mdio_ctrl_hw(struct nic *nic, u32 addr, u32 dir, u32 reg, u16 data)
+{
+ u32 data_out = 0;
+ unsigned int i;
+ unsigned long flags;
+
+
+ /*
+ * Stratus87247: we shouldn't be writing the MDI control
+ * register until the Ready bit shows True. Also, since
+ * manipulation of the MDI control registers is a multi-step
+ * procedure it should be done under lock.
+ */
+ spin_lock_irqsave(&nic->mdio_lock, flags);
+ for (i = 100; i; --i) {
+ if (ioread32(&nic->csr->mdi_ctrl) & mdi_ready)
+ break;
+ udelay(20);
+ }
+ if (unlikely(!i)) {
+ netdev_err(nic->netdev, "e100.mdio_ctrl won't go Ready\n");
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ return 0; /* No way to indicate timeout error */
+ }
+ iowrite32((reg << 16) | (addr << 21) | dir | data, &nic->csr->mdi_ctrl);
+
+ for (i = 0; i < 100; i++) {
+ udelay(20);
+ if ((data_out = ioread32(&nic->csr->mdi_ctrl)) & mdi_ready)
+ break;
+ }
+ spin_unlock_irqrestore(&nic->mdio_lock, flags);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data_in=0x%04X, data_out=0x%04X\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data, data_out);
+ return (u16)data_out;
+}
+
+/* slightly tweaked mdio_ctrl() function for phy_82552_v specifics */
+static u16 mdio_ctrl_phy_82552_v(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ if ((reg == MII_BMCR) && (dir == mdi_write)) {
+ if (data & (BMCR_ANRESTART | BMCR_ANENABLE)) {
+ u16 advert = mdio_read(nic->netdev, nic->mii.phy_id,
+ MII_ADVERTISE);
+
+ /*
+ * Workaround Si issue where sometimes the part will not
+ * autoneg to 100Mbps even when advertised.
+ */
+ if (advert & ADVERTISE_100FULL)
+ data |= BMCR_SPEED100 | BMCR_FULLDPLX;
+ else if (advert & ADVERTISE_100HALF)
+ data |= BMCR_SPEED100;
+ }
+ }
+ return mdio_ctrl_hw(nic, addr, dir, reg, data);
+}
+
+/* Fully software-emulated mdio_ctrl() function for cards without
+ * MII-compliant PHYs.
+ * For now, this is mainly geared towards 80c24 support; in case of further
+ * requirements for other types (i82503, ...?) either extend this mechanism
+ * or split it, whichever is cleaner.
+ */
+static u16 mdio_ctrl_phy_mii_emulated(struct nic *nic,
+ u32 addr,
+ u32 dir,
+ u32 reg,
+ u16 data)
+{
+ /* might need to allocate a netdev_priv'ed register array eventually
+ * to be able to record state changes, but for now
+ * some fully hardcoded register handling ought to be ok I guess. */
+
+ if (dir == mdi_read) {
+ switch (reg) {
+ case MII_BMCR:
+ /* Auto-negotiation, right? */
+ return BMCR_ANENABLE |
+ BMCR_FULLDPLX;
+ case MII_BMSR:
+ return BMSR_LSTATUS /* for mii_link_ok() */ |
+ BMSR_ANEGCAPABLE |
+ BMSR_10FULL;
+ case MII_ADVERTISE:
+ /* 80c24 is a "combo card" PHY, right? */
+ return ADVERTISE_10HALF |
+ ADVERTISE_10FULL;
+ default:
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data);
+ return 0xFFFF;
+ }
+ } else {
+ switch (reg) {
+ default:
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "%s:addr=%d, reg=%d, data=0x%04X: unimplemented emulation!\n",
+ dir == mdi_read ? "READ" : "WRITE",
+ addr, reg, data);
+ return 0xFFFF;
+ }
+ }
+}
+static inline int e100_phy_supports_mii(struct nic *nic)
+{
+ /* for now, just check it by comparing whether we
+ are using MII software emulation.
+ */
+ return (nic->mdio_ctrl != mdio_ctrl_phy_mii_emulated);
+}
+
+static void e100_get_defaults(struct nic *nic)
+{
+ struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+ struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
+
+ /* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
+ if (nic->mac == mac_unknown)
+ nic->mac = mac_82557_D100_A;
+
+ nic->params.rfds = rfds;
+ nic->params.cbs = cbs;
+
+ /* Quadwords to DMA into FIFO before starting frame transmit */
+ nic->tx_threshold = 0xE0;
+
+ /* no interrupt for every tx completion, delay = 256us if not 557 */
+ nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf |
+ ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i));
+
+ /* Template for a freshly allocated RFD */
+ nic->blank_rfd.command = 0;
+ nic->blank_rfd.rbd = cpu_to_le32(0xFFFFFFFF);
+ nic->blank_rfd.size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+
+ /* MII setup */
+ nic->mii.phy_id_mask = 0x1F;
+ nic->mii.reg_num_mask = 0x1F;
+ nic->mii.dev = nic->netdev;
+ nic->mii.mdio_read = mdio_read;
+ nic->mii.mdio_write = mdio_write;
+}
+
+static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct config *config = &cb->u.config;
+ u8 *c = (u8 *)config;
+
+ cb->command = cpu_to_le16(cb_config);
+
+ memset(config, 0, sizeof(struct config));
+
+ config->byte_count = 0x16; /* bytes in this struct */
+ config->rx_fifo_limit = 0x8; /* bytes in FIFO before DMA */
+ config->direct_rx_dma = 0x1; /* reserved */
+ config->standard_tcb = 0x1; /* 1=standard, 0=extended */
+ config->standard_stat_counter = 0x1; /* 1=standard, 0=extended */
+ config->rx_discard_short_frames = 0x1; /* 1=discard, 0=pass */
+ config->tx_underrun_retry = 0x3; /* # of underrun retries */
+ if (e100_phy_supports_mii(nic))
+ config->mii_mode = 1; /* 1=MII mode, 0=i82503 mode */
+ config->pad10 = 0x6;
+ config->no_source_addr_insertion = 0x1; /* 1=no, 0=yes */
+ config->preamble_length = 0x2; /* 0=1, 1=3, 2=7, 3=15 bytes */
+ config->ifs = 0x6; /* x16 = inter frame spacing */
+ config->ip_addr_hi = 0xF2; /* ARP IP filter - not used */
+ config->pad15_1 = 0x1;
+ config->pad15_2 = 0x1;
+ config->crs_or_cdt = 0x0; /* 0=CRS only, 1=CRS or CDT */
+ config->fc_delay_hi = 0x40; /* time delay for fc frame */
+ config->tx_padding = 0x1; /* 1=pad short frames */
+ config->fc_priority_threshold = 0x7; /* 7=priority fc disabled */
+ config->pad18 = 0x1;
+ config->full_duplex_pin = 0x1; /* 1=examine FDX# pin */
+ config->pad20_1 = 0x1F;
+ config->fc_priority_location = 0x1; /* 1=byte#31, 0=byte#19 */
+ config->pad21_1 = 0x5;
+
+ config->adaptive_ifs = nic->adaptive_ifs;
+ config->loopback = nic->loopback;
+
+ if (nic->mii.force_media && nic->mii.full_duplex)
+ config->full_duplex_force = 0x1; /* 1=force, 0=auto */
+
+ if (nic->flags & promiscuous || nic->loopback) {
+ config->rx_save_bad_frames = 0x1; /* 1=save, 0=discard */
+ config->rx_discard_short_frames = 0x0; /* 1=discard, 0=save */
+ config->promiscuous_mode = 0x1; /* 1=on, 0=off */
+ }
+
+ if (nic->flags & multicast_all)
+ config->multicast_all = 0x1; /* 1=accept, 0=no */
+
+ /* disable WoL when up */
+ if (netif_running(nic->netdev) || !(nic->flags & wol_magic))
+ config->magic_packet_disable = 0x1; /* 1=off, 0=on */
+
+ if (nic->mac >= mac_82558_D101_A4) {
+ config->fc_disable = 0x1; /* 1=Tx fc off, 0=Tx fc on */
+ config->mwi_enable = 0x1; /* 1=enable, 0=disable */
+ config->standard_tcb = 0x0; /* 1=standard, 0=extended */
+ config->rx_long_ok = 0x1; /* 1=VLANs ok, 0=standard */
+ if (nic->mac >= mac_82559_D101M) {
+ config->tno_intr = 0x1; /* TCO stats enable */
+ /* Enable TCO in extended config */
+ if (nic->mac >= mac_82551_10) {
+ config->byte_count = 0x20; /* extended bytes */
+ config->rx_d102_mode = 0x1; /* GMRC for TCO */
+ }
+ } else {
+ config->standard_stat_counter = 0x0;
+ }
+ }
+
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[00-07]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[0], c[1], c[2], c[3], c[4], c[5], c[6], c[7]);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[08-15]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[8], c[9], c[10], c[11], c[12], c[13], c[14], c[15]);
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "[16-23]=%02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
+}
+
+/*************************************************************************
+* CPUSaver parameters
+*
+* All CPUSaver parameters are 16-bit literals that are part of a
+* "move immediate value" instruction. By changing the value of
+* the literal in the instruction before the code is loaded, the
+* driver can change the algorithm.
+*
+* INTDELAY - This loads the dead-man timer with its initial value.
+* When this timer expires the interrupt is asserted, and the
+* timer is reset each time a new packet is received. (see
+* BUNDLEMAX below to set the limit on number of chained packets)
+* The current default is 0x600 or 1536. Experiments show that
+* the value should probably stay within the 0x200 - 0x1000.
+*
+* BUNDLEMAX -
+* This sets the maximum number of frames that will be bundled. In
+* some situations, such as the TCP windowing algorithm, it may be
+* better to limit the growth of the bundle size than let it go as
+* high as it can, because that could cause too much added latency.
+* The default is six, because this is the number of packets in the
+* default TCP window size. A value of 1 would make CPUSaver indicate
+* an interrupt for every frame received. If you do not want to put
+* a limit on the bundle size, set this value to xFFFF.
+*
+* BUNDLESMALL -
+* This contains a bit-mask describing the minimum size frame that
+* will be bundled. The default masks the lower 7 bits, which means
+* that any frame less than 128 bytes in length will not be bundled,
+* but will instead immediately generate an interrupt. This does
+* not affect the current bundle in any way. Any frame that is 128
+* bytes or large will be bundled normally. This feature is meant
+* to provide immediate indication of ACK frames in a TCP environment.
+* Customers were seeing poor performance when a machine with CPUSaver
+* enabled was sending but not receiving. The delay introduced when
+* the ACKs were received was enough to reduce total throughput, because
+* the sender would sit idle until the ACK was finally seen.
+*
+* The current default is 0xFF80, which masks out the lower 7 bits.
+* This means that any frame which is x7F (127) bytes or smaller
+* will cause an immediate interrupt. Because this value must be a
+* bit mask, there are only a few valid values that can be used. To
+* turn this feature off, the driver can write the value xFFFF to the
+* lower word of this instruction (in the same way that the other
+* parameters are used). Likewise, a value of 0xF800 (2047) would
+* cause an interrupt to be generated for every frame, because all
+* standard Ethernet frames are <= 2047 bytes in length.
+*************************************************************************/
+
+/* if you wish to disable the ucode functionality, while maintaining the
+ * workarounds it provides, set the following defines to:
+ * BUNDLESMALL 0
+ * BUNDLEMAX 1
+ * INTDELAY 1
+ */
+#define BUNDLESMALL 1
+#define BUNDLEMAX (u16)6
+#define INTDELAY (u16)1536 /* 0x600 */
+
+/* Initialize firmware */
+static const struct firmware *e100_request_firmware(struct nic *nic)
+{
+ const char *fw_name;
+ const struct firmware *fw = nic->fw;
+ u8 timer, bundle, min_size;
+ int err = 0;
+
+ /* do not load u-code for ICH devices */
+ if (nic->flags & ich)
+ return NULL;
+
+ /* Search for ucode match against h/w revision */
+ if (nic->mac == mac_82559_D101M)
+ fw_name = FIRMWARE_D101M;
+ else if (nic->mac == mac_82559_D101S)
+ fw_name = FIRMWARE_D101S;
+ else if (nic->mac == mac_82551_F || nic->mac == mac_82551_10)
+ fw_name = FIRMWARE_D102E;
+ else /* No ucode on other devices */
+ return NULL;
+
+ /* If the firmware has not previously been loaded, request a pointer
+ * to it. If it was previously loaded, we are reinitializing the
+ * adapter, possibly in a resume from hibernate, in which case
+ * request_firmware() cannot be used.
+ */
+ if (!fw)
+ err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+
+ if (err) {
+ netif_err(nic, probe, nic->netdev,
+ "Failed to load firmware \"%s\": %d\n",
+ fw_name, err);
+ return ERR_PTR(err);
+ }
+
+ /* Firmware should be precisely UCODE_SIZE (words) plus three bytes
+ indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
+ if (fw->size != UCODE_SIZE * 4 + 3) {
+ netif_err(nic, probe, nic->netdev,
+ "Firmware \"%s\" has wrong size %zu\n",
+ fw_name, fw->size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ if (timer >= UCODE_SIZE || bundle >= UCODE_SIZE ||
+ min_size >= UCODE_SIZE) {
+ netif_err(nic, probe, nic->netdev,
+ "\"%s\" has bogus offset values (0x%x,0x%x,0x%x)\n",
+ fw_name, timer, bundle, min_size);
+ release_firmware(fw);
+ return ERR_PTR(-EINVAL);
+ }
+
+ /* OK, firmware is validated and ready to use. Save a pointer
+ * to it in the nic */
+ nic->fw = fw;
+ return fw;
+}
+
+static void e100_setup_ucode(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ const struct firmware *fw = (void *)skb;
+ u8 timer, bundle, min_size;
+
+ /* It's not a real skb; we just abused the fact that e100_exec_cb
+ will pass it through to here... */
+ cb->skb = NULL;
+
+ /* firmware is stored as little endian already */
+ memcpy(cb->u.ucode, fw->data, UCODE_SIZE * 4);
+
+ /* Read timer, bundle and min_size from end of firmware blob */
+ timer = fw->data[UCODE_SIZE * 4];
+ bundle = fw->data[UCODE_SIZE * 4 + 1];
+ min_size = fw->data[UCODE_SIZE * 4 + 2];
+
+ /* Insert user-tunable settings in cb->u.ucode */
+ cb->u.ucode[timer] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[timer] |= cpu_to_le32(INTDELAY);
+ cb->u.ucode[bundle] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[bundle] |= cpu_to_le32(BUNDLEMAX);
+ cb->u.ucode[min_size] &= cpu_to_le32(0xFFFF0000);
+ cb->u.ucode[min_size] |= cpu_to_le32((BUNDLESMALL) ? 0xFFFF : 0xFF80);
+
+ cb->command = cpu_to_le16(cb_ucode | cb_el);
+}
+
+static inline int e100_load_ucode_wait(struct nic *nic)
+{
+ const struct firmware *fw;
+ int err = 0, counter = 50;
+ struct cb *cb = nic->cb_to_clean;
+
+ fw = e100_request_firmware(nic);
+ /* If it's NULL, then no ucode is required */
+ if (!fw || IS_ERR(fw))
+ return PTR_ERR(fw);
+
+ if ((err = e100_exec_cb(nic, (void *)fw, e100_setup_ucode)))
+ netif_err(nic, probe, nic->netdev,
+ "ucode cmd failed with error %d\n", err);
+
+ /* must restart cuc */
+ nic->cuc_cmd = cuc_start;
+
+ /* wait for completion */
+ e100_write_flush(nic);
+ udelay(10);
+
+ /* wait for possibly (ouch) 500ms */
+ while (!(cb->status & cpu_to_le16(cb_complete))) {
+ msleep(10);
+ if (!--counter) break;
+ }
+
+ /* ack any interrupts, something could have been set */
+ iowrite8(~0, &nic->csr->scb.stat_ack);
+
+ /* if the command failed, or is not OK, notify and return */
+ if (!counter || !(cb->status & cpu_to_le16(cb_ok))) {
+ netif_err(nic, probe, nic->netdev, "ucode load failed\n");
+ err = -EPERM;
+ }
+
+ return err;
+}
+
+static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_iaaddr);
+ memcpy(cb->u.iaaddr, nic->netdev->dev_addr, ETH_ALEN);
+}
+
+static void e100_dump(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ cb->command = cpu_to_le16(cb_dump);
+ cb->u.dump_buffer_addr = cpu_to_le32(nic->dma_addr +
+ offsetof(struct mem, dump_buf));
+}
+
+static int e100_phy_check_without_mii(struct nic *nic)
+{
+ u8 phy_type;
+ int without_mii;
+
+ phy_type = (nic->eeprom[eeprom_phy_iface] >> 8) & 0x0f;
+
+ switch (phy_type) {
+ case NoSuchPhy: /* Non-MII PHY; UNTESTED! */
+ case I82503: /* Non-MII PHY; UNTESTED! */
+ case S80C24: /* Non-MII PHY; tested and working */
+ /* paragraph from the FreeBSD driver, "FXP_PHY_80C24":
+ * The Seeq 80c24 AutoDUPLEX(tm) Ethernet Interface Adapter
+ * doesn't have a programming interface of any sort. The
+ * media is sensed automatically based on how the link partner
+ * is configured. This is, in essence, manual configuration.
+ */
+ netif_info(nic, probe, nic->netdev,
+ "found MII-less i82503 or 80c24 or other PHY\n");
+
+ nic->mdio_ctrl = mdio_ctrl_phy_mii_emulated;
+ nic->mii.phy_id = 0; /* is this ok for an MII-less PHY? */
+
+ /* these might be needed for certain MII-less cards...
+ * nic->flags |= ich;
+ * nic->flags |= ich_10h_workaround; */
+
+ without_mii = 1;
+ break;
+ default:
+ without_mii = 0;
+ break;
+ }
+ return without_mii;
+}
+
+#define NCONFIG_AUTO_SWITCH 0x0080
+#define MII_NSC_CONG MII_RESV1
+#define NSC_CONG_ENABLE 0x0100
+#define NSC_CONG_TXREADY 0x0400
+#define ADVERTISE_FC_SUPPORTED 0x0400
+static int e100_phy_init(struct nic *nic)
+{
+ struct net_device *netdev = nic->netdev;
+ u32 addr;
+ u16 bmcr, stat, id_lo, id_hi, cong;
+
+ /* Discover phy addr by searching addrs in order {1,0,2,..., 31} */
+ for (addr = 0; addr < 32; addr++) {
+ nic->mii.phy_id = (addr == 0) ? 1 : (addr == 1) ? 0 : addr;
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ stat = mdio_read(netdev, nic->mii.phy_id, MII_BMSR);
+ if (!((bmcr == 0xFFFF) || ((stat == 0) && (bmcr == 0))))
+ break;
+ }
+ if (addr == 32) {
+ /* uhoh, no PHY detected: check whether we seem to be some
+ * weird, rare variant which is *known* to not have any MII.
+ * But do this AFTER MII checking only, since this does
+ * lookup of EEPROM values which may easily be unreliable. */
+ if (e100_phy_check_without_mii(nic))
+ return 0; /* simply return and hope for the best */
+ else {
+ /* for unknown cases log a fatal error */
+ netif_err(nic, hw, nic->netdev,
+ "Failed to locate any known PHY, aborting\n");
+ return -EAGAIN;
+ }
+ } else
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "phy_addr = %d\n", nic->mii.phy_id);
+
+ /* Get phy ID */
+ id_lo = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID1);
+ id_hi = mdio_read(netdev, nic->mii.phy_id, MII_PHYSID2);
+ nic->phy = (u32)id_hi << 16 | (u32)id_lo;
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "phy ID = 0x%08X\n", nic->phy);
+
+ /* Select the phy and isolate the rest */
+ for (addr = 0; addr < 32; addr++) {
+ if (addr != nic->mii.phy_id) {
+ mdio_write(netdev, addr, MII_BMCR, BMCR_ISOLATE);
+ } else if (nic->phy != phy_82552_v) {
+ bmcr = mdio_read(netdev, addr, MII_BMCR);
+ mdio_write(netdev, addr, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+ }
+ }
+ /*
+ * Workaround for 82552:
+ * Clear the ISOLATE bit on selected phy_id last (mirrored on all
+ * other phy_id's) using bmcr value from addr discovery loop above.
+ */
+ if (nic->phy == phy_82552_v)
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR,
+ bmcr & ~BMCR_ISOLATE);
+
+ /* Handle National tx phys */
+#define NCS_PHY_MODEL_MASK 0xFFF0FFFF
+ if ((nic->phy & NCS_PHY_MODEL_MASK) == phy_nsc_tx) {
+ /* Disable congestion control */
+ cong = mdio_read(netdev, nic->mii.phy_id, MII_NSC_CONG);
+ cong |= NSC_CONG_TXREADY;
+ cong &= ~NSC_CONG_ENABLE;
+ mdio_write(netdev, nic->mii.phy_id, MII_NSC_CONG, cong);
+ }
+
+ if (nic->phy == phy_82552_v) {
+ u16 advert = mdio_read(netdev, nic->mii.phy_id, MII_ADVERTISE);
+
+ /* assign special tweaked mdio_ctrl() function */
+ nic->mdio_ctrl = mdio_ctrl_phy_82552_v;
+
+ /* Workaround Si not advertising flow-control during autoneg */
+ advert |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
+ mdio_write(netdev, nic->mii.phy_id, MII_ADVERTISE, advert);
+
+ /* Reset for the above changes to take effect */
+ bmcr = mdio_read(netdev, nic->mii.phy_id, MII_BMCR);
+ bmcr |= BMCR_RESET;
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, bmcr);
+ } else if ((nic->mac >= mac_82550_D102) || ((nic->flags & ich) &&
+ (mdio_read(netdev, nic->mii.phy_id, MII_TPISTATUS) & 0x8000) &&
+ !(nic->eeprom[eeprom_cnfg_mdix] & eeprom_mdix_enabled))) {
+ /* enable/disable MDI/MDI-X auto-switching. */
+ mdio_write(netdev, nic->mii.phy_id, MII_NCONFIG,
+ nic->mii.force_media ? 0 : NCONFIG_AUTO_SWITCH);
+ }
+
+ return 0;
+}
+
+static int e100_hw_init(struct nic *nic)
+{
+ int err = 0;
+
+ e100_hw_reset(nic);
+
+ netif_err(nic, hw, nic->netdev, "e100_hw_init\n");
+ if (!in_interrupt() && (err = e100_self_test(nic)))
+ return err;
+
+ if ((err = e100_phy_init(nic)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_load_base, 0)))
+ return err;
+ if ((err = e100_exec_cmd(nic, ruc_load_base, 0)))
+ return err;
+ if ((err = e100_load_ucode_wait(nic)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_configure)))
+ return err;
+ if ((err = e100_exec_cb(nic, NULL, e100_setup_iaaddr)))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_addr,
+ nic->dma_addr + offsetof(struct mem, stats))))
+ return err;
+ if ((err = e100_exec_cmd(nic, cuc_dump_reset, 0)))
+ return err;
+
+ e100_disable_irq(nic);
+
+ return 0;
+}
+
+static void e100_multi(struct nic *nic, struct cb *cb, struct sk_buff *skb)
+{
+ struct net_device *netdev = nic->netdev;
+ struct netdev_hw_addr *ha;
+ u16 i, count = min(netdev_mc_count(netdev), E100_MAX_MULTICAST_ADDRS);
+
+ cb->command = cpu_to_le16(cb_multi);
+ cb->u.multi.count = cpu_to_le16(count * ETH_ALEN);
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev) {
+ if (i == count)
+ break;
+ memcpy(&cb->u.multi.addr[i++ * ETH_ALEN], &ha->addr,
+ ETH_ALEN);
+ }
+}
+
+static void e100_set_multicast_list(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ netif_printk(nic, hw, KERN_DEBUG, nic->netdev,
+ "mc_count=%d, flags=0x%04X\n",
+ netdev_mc_count(netdev), netdev->flags);
+
+ if (netdev->flags & IFF_PROMISC)
+ nic->flags |= promiscuous;
+ else
+ nic->flags &= ~promiscuous;
+
+ if (netdev->flags & IFF_ALLMULTI ||
+ netdev_mc_count(netdev) > E100_MAX_MULTICAST_ADDRS)
+ nic->flags |= multicast_all;
+ else
+ nic->flags &= ~multicast_all;
+
+ e100_exec_cb(nic, NULL, e100_configure);
+ e100_exec_cb(nic, NULL, e100_multi);
+}
+
+static void e100_update_stats(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct net_device_stats *ns = &dev->stats;
+ struct stats *s = &nic->mem->stats;
+ __le32 *complete = (nic->mac < mac_82558_D101_A4) ? &s->fc_xmt_pause :
+ (nic->mac < mac_82559_D101M) ? (__le32 *)&s->xmt_tco_frames :
+ &s->complete;
+
+ /* Device's stats reporting may take several microseconds to
+ * complete, so we're always waiting for results of the
+ * previous command. */
+
+ if (*complete == cpu_to_le32(cuc_dump_reset_complete)) {
+ *complete = 0;
+ nic->tx_frames = le32_to_cpu(s->tx_good_frames);
+ nic->tx_collisions = le32_to_cpu(s->tx_total_collisions);
+ ns->tx_aborted_errors += le32_to_cpu(s->tx_max_collisions);
+ ns->tx_window_errors += le32_to_cpu(s->tx_late_collisions);
+ ns->tx_carrier_errors += le32_to_cpu(s->tx_lost_crs);
+ ns->tx_fifo_errors += le32_to_cpu(s->tx_underruns);
+ ns->collisions += nic->tx_collisions;
+ ns->tx_errors += le32_to_cpu(s->tx_max_collisions) +
+ le32_to_cpu(s->tx_lost_crs);
+ ns->rx_length_errors += le32_to_cpu(s->rx_short_frame_errors) +
+ nic->rx_over_length_errors;
+ ns->rx_crc_errors += le32_to_cpu(s->rx_crc_errors);
+ ns->rx_frame_errors += le32_to_cpu(s->rx_alignment_errors);
+ ns->rx_over_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_fifo_errors += le32_to_cpu(s->rx_overrun_errors);
+ ns->rx_missed_errors += le32_to_cpu(s->rx_resource_errors);
+ ns->rx_errors += le32_to_cpu(s->rx_crc_errors) +
+ le32_to_cpu(s->rx_alignment_errors) +
+ le32_to_cpu(s->rx_short_frame_errors) +
+ le32_to_cpu(s->rx_cdt_errors);
+ nic->tx_deferred += le32_to_cpu(s->tx_deferred);
+ nic->tx_single_collisions +=
+ le32_to_cpu(s->tx_single_collisions);
+ nic->tx_multiple_collisions +=
+ le32_to_cpu(s->tx_multiple_collisions);
+ if (nic->mac >= mac_82558_D101_A4) {
+ nic->tx_fc_pause += le32_to_cpu(s->fc_xmt_pause);
+ nic->rx_fc_pause += le32_to_cpu(s->fc_rcv_pause);
+ nic->rx_fc_unsupported +=
+ le32_to_cpu(s->fc_rcv_unsupported);
+ if (nic->mac >= mac_82559_D101M) {
+ nic->tx_tco_frames +=
+ le16_to_cpu(s->xmt_tco_frames);
+ nic->rx_tco_frames +=
+ le16_to_cpu(s->rcv_tco_frames);
+ }
+ }
+ }
+
+
+ if (e100_exec_cmd(nic, cuc_dump_reset, 0))
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "exec cuc_dump_reset failed\n");
+}
+
+static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex)
+{
+ /* Adjust inter-frame-spacing (IFS) between two transmits if
+ * we're getting collisions on a half-duplex connection. */
+
+ if (duplex == DUPLEX_HALF) {
+ u32 prev = nic->adaptive_ifs;
+ u32 min_frames = (speed == SPEED_100) ? 1000 : 100;
+
+ if ((nic->tx_frames / 32 < nic->tx_collisions) &&
+ (nic->tx_frames > min_frames)) {
+ if (nic->adaptive_ifs < 60)
+ nic->adaptive_ifs += 5;
+ } else if (nic->tx_frames < min_frames) {
+ if (nic->adaptive_ifs >= 5)
+ nic->adaptive_ifs -= 5;
+ }
+ if (nic->adaptive_ifs != prev)
+ e100_exec_cb(nic, NULL, e100_configure);
+ }
+}
+
+static void e100_watchdog(unsigned long data)
+{
+ struct nic *nic = (struct nic *)data;
+ struct ethtool_cmd cmd = { .cmd = ETHTOOL_GSET };
+ u32 speed;
+
+ netif_printk(nic, timer, KERN_DEBUG, nic->netdev,
+ "right now = %ld\n", jiffies);
+
+ /* mii library handles link maintenance tasks */
+
+ mii_ethtool_gset(&nic->mii, &cmd);
+ speed = ethtool_cmd_speed(&cmd);
+
+ if (mii_link_ok(&nic->mii) && !netif_carrier_ok(nic->netdev)) {
+ netdev_info(nic->netdev, "NIC Link is Up %u Mbps %s Duplex\n",
+ speed == SPEED_100 ? 100 : 10,
+ cmd.duplex == DUPLEX_FULL ? "Full" : "Half");
+ } else if (!mii_link_ok(&nic->mii) && netif_carrier_ok(nic->netdev)) {
+ netdev_info(nic->netdev, "NIC Link is Down\n");
+ }
+
+ mii_check_link(&nic->mii);
+
+ /* Software generated interrupt to recover from (rare) Rx
+ * allocation failure.
+ * Unfortunately have to use a spinlock to not re-enable interrupts
+ * accidentally, due to hardware that shares a register between the
+ * interrupt mask bit and the SW Interrupt generation bit */
+ spin_lock_irq(&nic->cmd_lock);
+ iowrite8(ioread8(&nic->csr->scb.cmd_hi) | irq_sw_gen,&nic->csr->scb.cmd_hi);
+ e100_write_flush(nic);
+ spin_unlock_irq(&nic->cmd_lock);
+
+ e100_update_stats(nic);
+ e100_adjust_adaptive_ifs(nic, speed, cmd.duplex);
+
+ if (nic->mac <= mac_82557_D100_C)
+ /* Issue a multicast command to workaround a 557 lock up */
+ e100_set_multicast_list(nic->netdev);
+
+ if (nic->flags & ich && speed == SPEED_10 && cmd.duplex == DUPLEX_HALF)
+ /* Need SW workaround for ICH[x] 10Mbps/half duplex Tx hang. */
+ nic->flags |= ich_10h_workaround;
+ else
+ nic->flags &= ~ich_10h_workaround;
+
+ mod_timer(&nic->watchdog,
+ round_jiffies(jiffies + E100_WATCHDOG_PERIOD));
+}
+
+static void e100_xmit_prepare(struct nic *nic, struct cb *cb,
+ struct sk_buff *skb)
+{
+ cb->command = nic->tx_command;
+ /* interrupt every 16 packets regardless of delay */
+ if ((nic->cbs_avail & ~15) == nic->cbs_avail)
+ cb->command |= cpu_to_le16(cb_i);
+ cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
+ cb->u.tcb.tcb_byte_count = 0;
+ cb->u.tcb.threshold = nic->tx_threshold;
+ cb->u.tcb.tbd_count = 1;
+ cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
+ skb->data, skb->len, PCI_DMA_TODEVICE));
+ /* check for mapping failure? */
+ cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
+}
+
+static netdev_tx_t e100_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ if (nic->flags & ich_10h_workaround) {
+ /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang.
+ Issue a NOP command followed by a 1us delay before
+ issuing the Tx command. */
+ if (e100_exec_cmd(nic, cuc_nop, 0))
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "exec cuc_nop failed\n");
+ udelay(1);
+ }
+
+ err = e100_exec_cb(nic, skb, e100_xmit_prepare);
+
+ switch (err) {
+ case -ENOSPC:
+ /* We queued the skb, but now we're out of space. */
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "No space for CB\n");
+ netif_stop_queue(netdev);
+ break;
+ case -ENOMEM:
+ /* This is a hard error - log it. */
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "Out of Tx resources, returning skb\n");
+ netif_stop_queue(netdev);
+ return NETDEV_TX_BUSY;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static int e100_tx_clean(struct nic *nic)
+{
+ struct net_device *dev = nic->netdev;
+ struct cb *cb;
+ int tx_cleaned = 0;
+
+ spin_lock(&nic->cb_lock);
+
+ /* Clean CBs marked complete */
+ for (cb = nic->cb_to_clean;
+ cb->status & cpu_to_le16(cb_complete);
+ cb = nic->cb_to_clean = cb->next) {
+ rmb(); /* read skb after status */
+ netif_printk(nic, tx_done, KERN_DEBUG, nic->netdev,
+ "cb[%d]->status = 0x%04X\n",
+ (int)(((void*)cb - (void*)nic->cbs)/sizeof(struct cb)),
+ cb->status);
+
+ if (likely(cb->skb != NULL)) {
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += cb->skb->len;
+
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(cb->skb);
+ cb->skb = NULL;
+ tx_cleaned = 1;
+ }
+ cb->status = 0;
+ nic->cbs_avail++;
+ }
+
+ spin_unlock(&nic->cb_lock);
+
+ /* Recover from running out of Tx resources in xmit_frame */
+ if (unlikely(tx_cleaned && netif_queue_stopped(nic->netdev)))
+ netif_wake_queue(nic->netdev);
+
+ return tx_cleaned;
+}
+
+static void e100_clean_cbs(struct nic *nic)
+{
+ if (nic->cbs) {
+ while (nic->cbs_avail != nic->params.cbs.count) {
+ struct cb *cb = nic->cb_to_clean;
+ if (cb->skb) {
+ pci_unmap_single(nic->pdev,
+ le32_to_cpu(cb->u.tcb.tbd.buf_addr),
+ le16_to_cpu(cb->u.tcb.tbd.size),
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb(cb->skb);
+ }
+ nic->cb_to_clean = nic->cb_to_clean->next;
+ nic->cbs_avail++;
+ }
+ pci_pool_free(nic->cbs_pool, nic->cbs, nic->cbs_dma_addr);
+ nic->cbs = NULL;
+ nic->cbs_avail = 0;
+ }
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean =
+ nic->cbs;
+}
+
+static int e100_alloc_cbs(struct nic *nic)
+{
+ struct cb *cb;
+ unsigned int i, count = nic->params.cbs.count;
+
+ nic->cuc_cmd = cuc_start;
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = NULL;
+ nic->cbs_avail = 0;
+
+ nic->cbs = pci_pool_alloc(nic->cbs_pool, GFP_KERNEL,
+ &nic->cbs_dma_addr);
+ if (!nic->cbs)
+ return -ENOMEM;
+ memset(nic->cbs, 0, count * sizeof(struct cb));
+
+ for (cb = nic->cbs, i = 0; i < count; cb++, i++) {
+ cb->next = (i + 1 < count) ? cb + 1 : nic->cbs;
+ cb->prev = (i == 0) ? nic->cbs + count - 1 : cb - 1;
+
+ cb->dma_addr = nic->cbs_dma_addr + i * sizeof(struct cb);
+ cb->link = cpu_to_le32(nic->cbs_dma_addr +
+ ((i+1) % count) * sizeof(struct cb));
+ }
+
+ nic->cb_to_use = nic->cb_to_send = nic->cb_to_clean = nic->cbs;
+ nic->cbs_avail = count;
+
+ return 0;
+}
+
+static inline void e100_start_receiver(struct nic *nic, struct rx *rx)
+{
+ if (!nic->rxs) return;
+ if (RU_SUSPENDED != nic->ru_running) return;
+
+ /* handle init time starts */
+ if (!rx) rx = nic->rxs;
+
+ /* (Re)start RU if suspended or idle and RFA is non-NULL */
+ if (rx->skb) {
+ e100_exec_cmd(nic, ruc_start, rx->dma_addr);
+ nic->ru_running = RU_RUNNING;
+ }
+}
+
+#define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
+static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
+{
+ if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
+ return -ENOMEM;
+
+ /* Init, and map the RFD. */
+ skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
+ rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (pci_dma_mapping_error(nic->pdev, rx->dma_addr)) {
+ dev_kfree_skb_any(rx->skb);
+ rx->skb = NULL;
+ rx->dma_addr = 0;
+ return -ENOMEM;
+ }
+
+ /* Link the RFD to end of RFA by linking previous RFD to
+ * this one. We are safe to touch the previous RFD because
+ * it is protected by the before last buffer's el bit being set */
+ if (rx->prev->skb) {
+ struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data;
+ put_unaligned_le32(rx->dma_addr, &prev_rfd->link);
+ pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ }
+
+ return 0;
+}
+
+static int e100_rx_indicate(struct nic *nic, struct rx *rx,
+ unsigned int *work_done, unsigned int work_to_do)
+{
+ struct net_device *dev = nic->netdev;
+ struct sk_buff *skb = rx->skb;
+ struct rfd *rfd = (struct rfd *)skb->data;
+ u16 rfd_status, actual_size;
+
+ if (unlikely(work_done && *work_done >= work_to_do))
+ return -EAGAIN;
+
+ /* Need to sync before taking a peek at cb_complete bit */
+ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+ rfd_status = le16_to_cpu(rfd->status);
+
+ netif_printk(nic, rx_status, KERN_DEBUG, nic->netdev,
+ "status=0x%04X\n", rfd_status);
+ rmb(); /* read size after status bit */
+
+ /* If data isn't ready, nothing to indicate */
+ if (unlikely(!(rfd_status & cb_complete))) {
+ /* If the next buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling
+ * interrupts */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running))
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd),
+ PCI_DMA_FROMDEVICE);
+ return -ENODATA;
+ }
+
+ /* Get actual data size */
+ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF;
+ if (unlikely(actual_size > RFD_BUF_LEN - sizeof(struct rfd)))
+ actual_size = RFD_BUF_LEN - sizeof(struct rfd);
+
+ /* Get data */
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ /* If this buffer has the el bit, but we think the receiver
+ * is still running, check to see if it really stopped while
+ * we had interrupts off.
+ * This allows for a fast restart without re-enabling interrupts.
+ * This can happen when the RU sees the size change but also sees
+ * the el bit set. */
+ if ((le16_to_cpu(rfd->command) & cb_el) &&
+ (RU_RUNNING == nic->ru_running)) {
+
+ if (ioread8(&nic->csr->scb.status) & rus_no_res)
+ nic->ru_running = RU_SUSPENDED;
+ }
+
+ /* Pull off the RFD and put the actual data (minus eth hdr) */
+ skb_reserve(skb, sizeof(struct rfd));
+ skb_put(skb, actual_size);
+ skb->protocol = eth_type_trans(skb, nic->netdev);
+
+ if (unlikely(!(rfd_status & cb_ok))) {
+ /* Don't indicate if hardware indicates errors */
+ dev_kfree_skb_any(skb);
+ } else if (actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
+ /* Don't indicate oversized frames */
+ nic->rx_over_length_errors++;
+ dev_kfree_skb_any(skb);
+ } else {
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += actual_size;
+ netif_receive_skb(skb);
+ if (work_done)
+ (*work_done)++;
+ }
+
+ rx->skb = NULL;
+
+ return 0;
+}
+
+static void e100_rx_clean(struct nic *nic, unsigned int *work_done,
+ unsigned int work_to_do)
+{
+ struct rx *rx;
+ int restart_required = 0, err = 0;
+ struct rx *old_before_last_rx, *new_before_last_rx;
+ struct rfd *old_before_last_rfd, *new_before_last_rfd;
+
+ /* Indicate newly arrived packets */
+ for (rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) {
+ err = e100_rx_indicate(nic, rx, work_done, work_to_do);
+ /* Hit quota or no more to clean */
+ if (-EAGAIN == err || -ENODATA == err)
+ break;
+ }
+
+
+ /* On EAGAIN, hit quota so have more work to do, restart once
+ * cleanup is complete.
+ * Else, are we already rnr? then pay attention!!! this ensures that
+ * the state machine progression never allows a start with a
+ * partially cleaned list, avoiding a race between hardware
+ * and rx_to_clean when in NAPI mode */
+ if (-EAGAIN != err && RU_SUSPENDED == nic->ru_running)
+ restart_required = 1;
+
+ old_before_last_rx = nic->rx_to_use->prev->prev;
+ old_before_last_rfd = (struct rfd *)old_before_last_rx->skb->data;
+
+ /* Alloc new skbs to refill list */
+ for (rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) {
+ if (unlikely(e100_rx_alloc_skb(nic, rx)))
+ break; /* Better luck next time (see watchdog) */
+ }
+
+ new_before_last_rx = nic->rx_to_use->prev->prev;
+ if (new_before_last_rx != old_before_last_rx) {
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer
+ * without worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this
+ * buffer.
+ * When the hardware hits the before last buffer with el-bit
+ * and size of 0, it will RNR interrupt, the RUS will go into
+ * the No Resources state. It will not complete nor write to
+ * this buffer. */
+ new_before_last_rfd =
+ (struct rfd *)new_before_last_rx->skb->data;
+ new_before_last_rfd->size = 0;
+ new_before_last_rfd->command |= cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ new_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Now that we have a new stopping point, we can clear the old
+ * stopping point. We must sync twice to get the proper
+ * ordering on the hardware side of things. */
+ old_before_last_rfd->command &= ~cpu_to_le16(cb_el);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN);
+ pci_dma_sync_single_for_device(nic->pdev,
+ old_before_last_rx->dma_addr, sizeof(struct rfd),
+ PCI_DMA_BIDIRECTIONAL);
+ }
+
+ if (restart_required) {
+ // ack the rnr?
+ iowrite8(stat_ack_rnr, &nic->csr->scb.stat_ack);
+ e100_start_receiver(nic, nic->rx_to_clean);
+ if (work_done)
+ (*work_done)++;
+ }
+}
+
+static void e100_rx_clean_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (nic->rxs) {
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ if (rx->skb) {
+ pci_unmap_single(nic->pdev, rx->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+ dev_kfree_skb(rx->skb);
+ }
+ }
+ kfree(nic->rxs);
+ nic->rxs = NULL;
+ }
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+}
+
+static int e100_rx_alloc_list(struct nic *nic)
+{
+ struct rx *rx;
+ unsigned int i, count = nic->params.rfds.count;
+ struct rfd *before_last;
+
+ nic->rx_to_use = nic->rx_to_clean = NULL;
+ nic->ru_running = RU_UNINITIALIZED;
+
+ if (!(nic->rxs = kcalloc(count, sizeof(struct rx), GFP_ATOMIC)))
+ return -ENOMEM;
+
+ for (rx = nic->rxs, i = 0; i < count; rx++, i++) {
+ rx->next = (i + 1 < count) ? rx + 1 : nic->rxs;
+ rx->prev = (i == 0) ? nic->rxs + count - 1 : rx - 1;
+ if (e100_rx_alloc_skb(nic, rx)) {
+ e100_rx_clean_list(nic);
+ return -ENOMEM;
+ }
+ }
+ /* Set the el-bit on the buffer that is before the last buffer.
+ * This lets us update the next pointer on the last buffer without
+ * worrying about hardware touching it.
+ * We set the size to 0 to prevent hardware from touching this buffer.
+ * When the hardware hits the before last buffer with el-bit and size
+ * of 0, it will RNR interrupt, the RU will go into the No Resources
+ * state. It will not complete nor write to this buffer. */
+ rx = nic->rxs->prev->prev;
+ before_last = (struct rfd *)rx->skb->data;
+ before_last->command |= cpu_to_le16(cb_el);
+ before_last->size = 0;
+ pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr,
+ sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL);
+
+ nic->rx_to_use = nic->rx_to_clean = nic->rxs;
+ nic->ru_running = RU_SUSPENDED;
+
+ return 0;
+}
+
+static irqreturn_t e100_intr(int irq, void *dev_id)
+{
+ struct net_device *netdev = dev_id;
+ struct nic *nic = netdev_priv(netdev);
+ u8 stat_ack = ioread8(&nic->csr->scb.stat_ack);
+
+ netif_printk(nic, intr, KERN_DEBUG, nic->netdev,
+ "stat_ack = 0x%02X\n", stat_ack);
+
+ if (stat_ack == stat_ack_not_ours || /* Not our interrupt */
+ stat_ack == stat_ack_not_present) /* Hardware is ejected */
+ return IRQ_NONE;
+
+ /* Ack interrupt(s) */
+ iowrite8(stat_ack, &nic->csr->scb.stat_ack);
+
+ /* We hit Receive No Resource (RNR); restart RU after cleaning */
+ if (stat_ack & stat_ack_rnr)
+ nic->ru_running = RU_SUSPENDED;
+
+ if (likely(napi_schedule_prep(&nic->napi))) {
+ e100_disable_irq(nic);
+ __napi_schedule(&nic->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int e100_poll(struct napi_struct *napi, int budget)
+{
+ struct nic *nic = container_of(napi, struct nic, napi);
+ unsigned int work_done = 0;
+
+ e100_rx_clean(nic, &work_done, budget);
+ e100_tx_clean(nic);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ e100_enable_irq(nic);
+ }
+
+ return work_done;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void e100_netpoll(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ e100_disable_irq(nic);
+ e100_intr(nic->pdev->irq, netdev);
+ e100_tx_clean(nic);
+ e100_enable_irq(nic);
+}
+#endif
+
+static int e100_set_mac_address(struct net_device *netdev, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ e100_exec_cb(nic, NULL, e100_setup_iaaddr);
+
+ return 0;
+}
+
+static int e100_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ if (new_mtu < ETH_ZLEN || new_mtu > ETH_DATA_LEN)
+ return -EINVAL;
+ netdev->mtu = new_mtu;
+ return 0;
+}
+
+static int e100_asf(struct nic *nic)
+{
+ /* ASF can be enabled from eeprom */
+ return (nic->pdev->device >= 0x1050) && (nic->pdev->device <= 0x1057) &&
+ (nic->eeprom[eeprom_config_asf] & eeprom_asf) &&
+ !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) &&
+ ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE);
+}
+
+static int e100_up(struct nic *nic)
+{
+ int err;
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_rx_clean_list;
+ if ((err = e100_hw_init(nic)))
+ goto err_clean_cbs;
+ e100_set_multicast_list(nic->netdev);
+ e100_start_receiver(nic, NULL);
+ mod_timer(&nic->watchdog, jiffies);
+ if ((err = request_irq(nic->pdev->irq, e100_intr, IRQF_SHARED,
+ nic->netdev->name, nic->netdev)))
+ goto err_no_irq;
+ netif_wake_queue(nic->netdev);
+ napi_enable(&nic->napi);
+ /* enable ints _after_ enabling poll, preventing a race between
+ * disable ints+schedule */
+ e100_enable_irq(nic);
+ return 0;
+
+err_no_irq:
+ del_timer_sync(&nic->watchdog);
+err_clean_cbs:
+ e100_clean_cbs(nic);
+err_rx_clean_list:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+static void e100_down(struct nic *nic)
+{
+ /* wait here for poll to complete */
+ napi_disable(&nic->napi);
+ netif_stop_queue(nic->netdev);
+ e100_hw_reset(nic);
+ free_irq(nic->pdev->irq, nic->netdev);
+ del_timer_sync(&nic->watchdog);
+ netif_carrier_off(nic->netdev);
+ e100_clean_cbs(nic);
+ e100_rx_clean_list(nic);
+}
+
+static void e100_tx_timeout(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ /* Reset outside of interrupt context, to avoid request_irq
+ * in interrupt context */
+ schedule_work(&nic->tx_timeout_task);
+}
+
+static void e100_tx_timeout_task(struct work_struct *work)
+{
+ struct nic *nic = container_of(work, struct nic, tx_timeout_task);
+ struct net_device *netdev = nic->netdev;
+
+ netif_printk(nic, tx_err, KERN_DEBUG, nic->netdev,
+ "scb.status=0x%02X\n", ioread8(&nic->csr->scb.status));
+
+ rtnl_lock();
+ if (netif_running(netdev)) {
+ e100_down(netdev_priv(netdev));
+ e100_up(netdev_priv(netdev));
+ }
+ rtnl_unlock();
+}
+
+static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode)
+{
+ int err;
+ struct sk_buff *skb;
+
+ /* Use driver resources to perform internal MAC or PHY
+ * loopback test. A single packet is prepared and transmitted
+ * in loopback mode, and the test passes if the received
+ * packet compares byte-for-byte to the transmitted packet. */
+
+ if ((err = e100_rx_alloc_list(nic)))
+ return err;
+ if ((err = e100_alloc_cbs(nic)))
+ goto err_clean_rx;
+
+ /* ICH PHY loopback is broken so do MAC loopback instead */
+ if (nic->flags & ich && loopback_mode == lb_phy)
+ loopback_mode = lb_mac;
+
+ nic->loopback = loopback_mode;
+ if ((err = e100_hw_init(nic)))
+ goto err_loopback_none;
+
+ if (loopback_mode == lb_phy)
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR,
+ BMCR_LOOPBACK);
+
+ e100_start_receiver(nic, NULL);
+
+ if (!(skb = netdev_alloc_skb(nic->netdev, ETH_DATA_LEN))) {
+ err = -ENOMEM;
+ goto err_loopback_none;
+ }
+ skb_put(skb, ETH_DATA_LEN);
+ memset(skb->data, 0xFF, ETH_DATA_LEN);
+ e100_xmit_frame(skb, nic->netdev);
+
+ msleep(10);
+
+ pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr,
+ RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
+
+ if (memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd),
+ skb->data, ETH_DATA_LEN))
+ err = -EAGAIN;
+
+err_loopback_none:
+ mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, 0);
+ nic->loopback = lb_none;
+ e100_clean_cbs(nic);
+ e100_hw_reset(nic);
+err_clean_rx:
+ e100_rx_clean_list(nic);
+ return err;
+}
+
+#define MII_LED_CONTROL 0x1B
+#define E100_82552_LED_OVERRIDE 0x19
+#define E100_82552_LED_ON 0x000F /* LEDTX and LED_RX both on */
+#define E100_82552_LED_OFF 0x000A /* LEDTX and LED_RX both off */
+
+static int e100_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_ethtool_gset(&nic->mii, cmd);
+}
+
+static int e100_set_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err;
+
+ mdio_write(netdev, nic->mii.phy_id, MII_BMCR, BMCR_RESET);
+ err = mii_ethtool_sset(&nic->mii, cmd);
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return err;
+}
+
+static void e100_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *info)
+{
+ struct nic *nic = netdev_priv(netdev);
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->fw_version, "N/A");
+ strcpy(info->bus_info, pci_name(nic->pdev));
+}
+
+#define E100_PHY_REGS 0x1C
+static int e100_get_regs_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return 1 + E100_PHY_REGS + sizeof(nic->mem->dump_buf);
+}
+
+static void e100_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct nic *nic = netdev_priv(netdev);
+ u32 *buff = p;
+ int i;
+
+ regs->version = (1 << 24) | nic->pdev->revision;
+ buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
+ ioread8(&nic->csr->scb.cmd_lo) << 16 |
+ ioread16(&nic->csr->scb.status);
+ for (i = E100_PHY_REGS; i >= 0; i--)
+ buff[1 + E100_PHY_REGS - i] =
+ mdio_read(netdev, nic->mii.phy_id, i);
+ memset(nic->mem->dump_buf, 0, sizeof(nic->mem->dump_buf));
+ e100_exec_cb(nic, NULL, e100_dump);
+ msleep(10);
+ memcpy(&buff[2 + E100_PHY_REGS], nic->mem->dump_buf,
+ sizeof(nic->mem->dump_buf));
+}
+
+static void e100_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+ wol->supported = (nic->mac >= mac_82558_D101_A4) ? WAKE_MAGIC : 0;
+ wol->wolopts = (nic->flags & wol_magic) ? WAKE_MAGIC : 0;
+}
+
+static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if ((wol->wolopts && wol->wolopts != WAKE_MAGIC) ||
+ !device_can_wakeup(&nic->pdev->dev))
+ return -EOPNOTSUPP;
+
+ if (wol->wolopts)
+ nic->flags |= wol_magic;
+ else
+ nic->flags &= ~wol_magic;
+
+ device_set_wakeup_enable(&nic->pdev->dev, wol->wolopts);
+
+ e100_exec_cb(nic, NULL, e100_configure);
+
+ return 0;
+}
+
+static u32 e100_get_msglevel(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->msg_enable;
+}
+
+static void e100_set_msglevel(struct net_device *netdev, u32 value)
+{
+ struct nic *nic = netdev_priv(netdev);
+ nic->msg_enable = value;
+}
+
+static int e100_nway_reset(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_nway_restart(&nic->mii);
+}
+
+static u32 e100_get_link(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return mii_link_ok(&nic->mii);
+}
+
+static int e100_get_eeprom_len(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ return nic->eeprom_wc << 1;
+}
+
+#define E100_EEPROM_MAGIC 0x1234
+static int e100_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ eeprom->magic = E100_EEPROM_MAGIC;
+ memcpy(bytes, &((u8 *)nic->eeprom)[eeprom->offset], eeprom->len);
+
+ return 0;
+}
+
+static int e100_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ if (eeprom->magic != E100_EEPROM_MAGIC)
+ return -EINVAL;
+
+ memcpy(&((u8 *)nic->eeprom)[eeprom->offset], bytes, eeprom->len);
+
+ return e100_eeprom_save(nic, eeprom->offset >> 1,
+ (eeprom->len >> 1) + 1);
+}
+
+static void e100_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ ring->rx_max_pending = rfds->max;
+ ring->tx_max_pending = cbs->max;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rfds->count;
+ ring->tx_pending = cbs->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e100_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct nic *nic = netdev_priv(netdev);
+ struct param_range *rfds = &nic->params.rfds;
+ struct param_range *cbs = &nic->params.cbs;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ rfds->count = max(ring->rx_pending, rfds->min);
+ rfds->count = min(rfds->count, rfds->max);
+ cbs->count = max(ring->tx_pending, cbs->min);
+ cbs->count = min(cbs->count, cbs->max);
+ netif_info(nic, drv, nic->netdev, "Ring Param settings: rx: %d, tx %d\n",
+ rfds->count, cbs->count);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+
+static const char e100_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)",
+ "Eeprom test (on/offline)",
+ "Self test (offline)",
+ "Mac loopback (offline)",
+ "Phy loopback (offline)",
+};
+#define E100_TEST_LEN ARRAY_SIZE(e100_gstrings_test)
+
+static void e100_diag_test(struct net_device *netdev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct ethtool_cmd cmd;
+ struct nic *nic = netdev_priv(netdev);
+ int i, err;
+
+ memset(data, 0, E100_TEST_LEN * sizeof(u64));
+ data[0] = !mii_link_ok(&nic->mii);
+ data[1] = e100_eeprom_load(nic);
+ if (test->flags & ETH_TEST_FL_OFFLINE) {
+
+ /* save speed, duplex & autoneg settings */
+ err = mii_ethtool_gset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ data[2] = e100_self_test(nic);
+ data[3] = e100_loopback_test(nic, lb_mac);
+ data[4] = e100_loopback_test(nic, lb_phy);
+
+ /* restore speed, duplex & autoneg settings */
+ err = mii_ethtool_sset(&nic->mii, &cmd);
+
+ if (netif_running(netdev))
+ e100_up(nic);
+ }
+ for (i = 0; i < E100_TEST_LEN; i++)
+ test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+ msleep_interruptible(4 * 1000);
+}
+
+static int e100_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct nic *nic = netdev_priv(netdev);
+ enum led_state {
+ led_on = 0x01,
+ led_off = 0x04,
+ led_on_559 = 0x05,
+ led_on_557 = 0x07,
+ };
+ u16 led_reg = (nic->phy == phy_82552_v) ? E100_82552_LED_OVERRIDE :
+ MII_LED_CONTROL;
+ u16 leds = 0;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2;
+
+ case ETHTOOL_ID_ON:
+ leds = (nic->phy == phy_82552_v) ? E100_82552_LED_ON :
+ (nic->mac < mac_82559_D101M) ? led_on_557 : led_on_559;
+ break;
+
+ case ETHTOOL_ID_OFF:
+ leds = (nic->phy == phy_82552_v) ? E100_82552_LED_OFF : led_off;
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ break;
+ }
+
+ mdio_write(netdev, nic->mii.phy_id, led_reg, leds);
+ return 0;
+}
+
+static const char e100_gstrings_stats[][ETH_GSTRING_LEN] = {
+ "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
+ "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
+ "rx_length_errors", "rx_over_errors", "rx_crc_errors",
+ "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors",
+ "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors",
+ "tx_heartbeat_errors", "tx_window_errors",
+ /* device-specific stats */
+ "tx_deferred", "tx_single_collisions", "tx_multi_collisions",
+ "tx_flow_control_pause", "rx_flow_control_pause",
+ "rx_flow_control_unsupported", "tx_tco_packets", "rx_tco_packets",
+};
+#define E100_NET_STATS_LEN 21
+#define E100_STATS_LEN ARRAY_SIZE(e100_gstrings_stats)
+
+static int e100_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E100_TEST_LEN;
+ case ETH_SS_STATS:
+ return E100_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e100_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int i;
+
+ for (i = 0; i < E100_NET_STATS_LEN; i++)
+ data[i] = ((unsigned long *)&netdev->stats)[i];
+
+ data[i++] = nic->tx_deferred;
+ data[i++] = nic->tx_single_collisions;
+ data[i++] = nic->tx_multiple_collisions;
+ data[i++] = nic->tx_fc_pause;
+ data[i++] = nic->rx_fc_pause;
+ data[i++] = nic->rx_fc_unsupported;
+ data[i++] = nic->tx_tco_frames;
+ data[i++] = nic->rx_tco_frames;
+}
+
+static void e100_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e100_gstrings_test, sizeof(e100_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ memcpy(data, *e100_gstrings_stats, sizeof(e100_gstrings_stats));
+ break;
+ }
+}
+
+static const struct ethtool_ops e100_ethtool_ops = {
+ .get_settings = e100_get_settings,
+ .set_settings = e100_set_settings,
+ .get_drvinfo = e100_get_drvinfo,
+ .get_regs_len = e100_get_regs_len,
+ .get_regs = e100_get_regs,
+ .get_wol = e100_get_wol,
+ .set_wol = e100_set_wol,
+ .get_msglevel = e100_get_msglevel,
+ .set_msglevel = e100_set_msglevel,
+ .nway_reset = e100_nway_reset,
+ .get_link = e100_get_link,
+ .get_eeprom_len = e100_get_eeprom_len,
+ .get_eeprom = e100_get_eeprom,
+ .set_eeprom = e100_set_eeprom,
+ .get_ringparam = e100_get_ringparam,
+ .set_ringparam = e100_set_ringparam,
+ .self_test = e100_diag_test,
+ .get_strings = e100_get_strings,
+ .set_phys_id = e100_set_phys_id,
+ .get_ethtool_stats = e100_get_ethtool_stats,
+ .get_sset_count = e100_get_sset_count,
+};
+
+static int e100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct nic *nic = netdev_priv(netdev);
+
+ return generic_mii_ioctl(&nic->mii, if_mii(ifr), cmd, NULL);
+}
+
+static int e100_alloc(struct nic *nic)
+{
+ nic->mem = pci_alloc_consistent(nic->pdev, sizeof(struct mem),
+ &nic->dma_addr);
+ return nic->mem ? 0 : -ENOMEM;
+}
+
+static void e100_free(struct nic *nic)
+{
+ if (nic->mem) {
+ pci_free_consistent(nic->pdev, sizeof(struct mem),
+ nic->mem, nic->dma_addr);
+ nic->mem = NULL;
+ }
+}
+
+static int e100_open(struct net_device *netdev)
+{
+ struct nic *nic = netdev_priv(netdev);
+ int err = 0;
+
+ netif_carrier_off(netdev);
+ if ((err = e100_up(nic)))
+ netif_err(nic, ifup, nic->netdev, "Cannot open interface, aborting\n");
+ return err;
+}
+
+static int e100_close(struct net_device *netdev)
+{
+ e100_down(netdev_priv(netdev));
+ return 0;
+}
+
+static const struct net_device_ops e100_netdev_ops = {
+ .ndo_open = e100_open,
+ .ndo_stop = e100_close,
+ .ndo_start_xmit = e100_xmit_frame,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_multicast_list = e100_set_multicast_list,
+ .ndo_set_mac_address = e100_set_mac_address,
+ .ndo_change_mtu = e100_change_mtu,
+ .ndo_do_ioctl = e100_do_ioctl,
+ .ndo_tx_timeout = e100_tx_timeout,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e100_netpoll,
+#endif
+};
+
+static int __devinit e100_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct nic *nic;
+ int err;
+
+ if (!(netdev = alloc_etherdev(sizeof(struct nic)))) {
+ if (((1 << debug) - 1) & NETIF_MSG_PROBE)
+ pr_err("Etherdev alloc failed, aborting\n");
+ return -ENOMEM;
+ }
+
+ netdev->netdev_ops = &e100_netdev_ops;
+ SET_ETHTOOL_OPS(netdev, &e100_ethtool_ops);
+ netdev->watchdog_timeo = E100_WATCHDOG_PERIOD;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ nic = netdev_priv(netdev);
+ netif_napi_add(netdev, &nic->napi, e100_poll, E100_NAPI_WEIGHT);
+ nic->netdev = netdev;
+ nic->pdev = pdev;
+ nic->msg_enable = (1 << debug) - 1;
+ nic->mdio_ctrl = mdio_ctrl_hw;
+ pci_set_drvdata(pdev, netdev);
+
+ if ((err = pci_enable_device(pdev))) {
+ netif_err(nic, probe, nic->netdev, "Cannot enable PCI device, aborting\n");
+ goto err_out_free_dev;
+ }
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ netif_err(nic, probe, nic->netdev, "Cannot find proper PCI device base address, aborting\n");
+ err = -ENODEV;
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_request_regions(pdev, DRV_NAME))) {
+ netif_err(nic, probe, nic->netdev, "Cannot obtain PCI resources, aborting\n");
+ goto err_out_disable_pdev;
+ }
+
+ if ((err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))) {
+ netif_err(nic, probe, nic->netdev, "No usable DMA configuration, aborting\n");
+ goto err_out_free_res;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ if (use_io)
+ netif_info(nic, probe, nic->netdev, "using i/o access mode\n");
+
+ nic->csr = pci_iomap(pdev, (use_io ? 1 : 0), sizeof(struct csr));
+ if (!nic->csr) {
+ netif_err(nic, probe, nic->netdev, "Cannot map device registers, aborting\n");
+ err = -ENOMEM;
+ goto err_out_free_res;
+ }
+
+ if (ent->driver_data)
+ nic->flags |= ich;
+ else
+ nic->flags &= ~ich;
+
+ e100_get_defaults(nic);
+
+ /* locks must be initialized before calling hw_reset */
+ spin_lock_init(&nic->cb_lock);
+ spin_lock_init(&nic->cmd_lock);
+ spin_lock_init(&nic->mdio_lock);
+
+ /* Reset the device before pci_set_master() in case device is in some
+ * funky state and has an interrupt pending - hint: we don't have the
+ * interrupt handler registered yet. */
+ e100_hw_reset(nic);
+
+ pci_set_master(pdev);
+
+ init_timer(&nic->watchdog);
+ nic->watchdog.function = e100_watchdog;
+ nic->watchdog.data = (unsigned long)nic;
+
+ INIT_WORK(&nic->tx_timeout_task, e100_tx_timeout_task);
+
+ if ((err = e100_alloc(nic))) {
+ netif_err(nic, probe, nic->netdev, "Cannot alloc driver memory, aborting\n");
+ goto err_out_iounmap;
+ }
+
+ if ((err = e100_eeprom_load(nic)))
+ goto err_out_free;
+
+ e100_phy_init(nic);
+
+ memcpy(netdev->dev_addr, nic->eeprom, ETH_ALEN);
+ memcpy(netdev->perm_addr, nic->eeprom, ETH_ALEN);
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ if (!eeprom_bad_csum_allow) {
+ netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, aborting\n");
+ err = -EAGAIN;
+ goto err_out_free;
+ } else {
+ netif_err(nic, probe, nic->netdev, "Invalid MAC address from EEPROM, you MUST configure one.\n");
+ }
+ }
+
+ /* Wol magic packet can be enabled from eeprom */
+ if ((nic->mac >= mac_82558_D101_A4) &&
+ (nic->eeprom[eeprom_id] & eeprom_id_wol)) {
+ nic->flags |= wol_magic;
+ device_set_wakeup_enable(&pdev->dev, true);
+ }
+
+ /* ack any pending wake events, disable PME */
+ pci_pme_active(pdev, false);
+
+ strcpy(netdev->name, "eth%d");
+ if ((err = register_netdev(netdev))) {
+ netif_err(nic, probe, nic->netdev, "Cannot register net device, aborting\n");
+ goto err_out_free;
+ }
+ nic->cbs_pool = pci_pool_create(netdev->name,
+ nic->pdev,
+ nic->params.cbs.max * sizeof(struct cb),
+ sizeof(u32),
+ 0);
+ netif_info(nic, probe, nic->netdev,
+ "addr 0x%llx, irq %d, MAC addr %pM\n",
+ (unsigned long long)pci_resource_start(pdev, use_io ? 1 : 0),
+ pdev->irq, netdev->dev_addr);
+
+ return 0;
+
+err_out_free:
+ e100_free(nic);
+err_out_iounmap:
+ pci_iounmap(pdev, nic->csr);
+err_out_free_res:
+ pci_release_regions(pdev);
+err_out_disable_pdev:
+ pci_disable_device(pdev);
+err_out_free_dev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+ return err;
+}
+
+static void __devexit e100_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+
+ if (netdev) {
+ struct nic *nic = netdev_priv(netdev);
+ unregister_netdev(netdev);
+ e100_free(nic);
+ pci_iounmap(pdev, nic->csr);
+ pci_pool_destroy(nic->cbs_pool);
+ free_netdev(netdev);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+#define E100_82552_SMARTSPEED 0x14 /* SmartSpeed Ctrl register */
+#define E100_82552_REV_ANEG 0x0200 /* Reverse auto-negotiation */
+#define E100_82552_ANEG_NOW 0x0400 /* Auto-negotiate now */
+static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ netif_device_detach(netdev);
+
+ pci_save_state(pdev);
+
+ if ((nic->flags & wol_magic) | e100_asf(nic)) {
+ /* enable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED, smartspeed |
+ E100_82552_REV_ANEG | E100_82552_ANEG_NOW);
+ }
+ *enable_wake = true;
+ } else {
+ *enable_wake = false;
+ }
+
+ pci_disable_device(pdev);
+}
+
+static int __e100_power_off(struct pci_dev *pdev, bool wake)
+{
+ if (wake)
+ return pci_prepare_to_sleep(pdev);
+
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e100_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ return __e100_power_off(pdev, wake);
+}
+
+static int e100_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ /* disable reverse auto-negotiation */
+ if (nic->phy == phy_82552_v) {
+ u16 smartspeed = mdio_read(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED);
+
+ mdio_write(netdev, nic->mii.phy_id,
+ E100_82552_SMARTSPEED,
+ smartspeed & ~(E100_82552_REV_ANEG));
+ }
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev))
+ e100_up(nic);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void e100_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+ __e100_shutdown(pdev, &wake);
+ if (system_state == SYSTEM_POWER_OFF)
+ __e100_power_off(pdev, wake);
+}
+
+/* ------------------ PCI Error Recovery infrastructure -------------- */
+/**
+ * e100_io_error_detected - called when PCI error is detected.
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ */
+static pci_ers_result_t e100_io_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e100_down(nic);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e100_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch.
+ */
+static pci_ers_result_t e100_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ pr_err("Cannot re-enable PCI device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ /* Only one device per card can do a reset */
+ if (0 != PCI_FUNC(pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+ e100_hw_reset(nic);
+ e100_phy_init(nic);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e100_io_resume - resume normal operations
+ * @pdev: Pointer to PCI device
+ *
+ * Resume normal operations after an error recovery
+ * sequence has been completed.
+ */
+static void e100_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct nic *nic = netdev_priv(netdev);
+
+ /* ack any pending wake events, disable PME */
+ pci_enable_wake(pdev, 0, 0);
+
+ netif_device_attach(netdev);
+ if (netif_running(netdev)) {
+ e100_open(netdev);
+ mod_timer(&nic->watchdog, jiffies);
+ }
+}
+
+static struct pci_error_handlers e100_err_handler = {
+ .error_detected = e100_io_error_detected,
+ .slot_reset = e100_io_slot_reset,
+ .resume = e100_io_resume,
+};
+
+static struct pci_driver e100_driver = {
+ .name = DRV_NAME,
+ .id_table = e100_id_table,
+ .probe = e100_probe,
+ .remove = __devexit_p(e100_remove),
+#ifdef CONFIG_PM
+ /* Power Management hooks */
+ .suspend = e100_suspend,
+ .resume = e100_resume,
+#endif
+ .shutdown = e100_shutdown,
+ .err_handler = &e100_err_handler,
+};
+
+static int __init e100_init_module(void)
+{
+ if (((1 << debug) - 1) & NETIF_MSG_DRV) {
+ pr_info("%s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
+ pr_info("%s\n", DRV_COPYRIGHT);
+ }
+ return pci_register_driver(&e100_driver);
+}
+
+static void __exit e100_cleanup_module(void)
+{
+ pci_unregister_driver(&e100_driver);
+}
+
+module_init(e100_init_module);
+module_exit(e100_cleanup_module);
--- /dev/null
+################################################################################
+#
+# Intel PRO/1000 Linux driver
+# Copyright(c) 1999 - 2006 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) PRO/1000 ethernet driver
+#
+
+obj-$(CONFIG_E1000) += e1000.o
+
+e1000-objs := e1000_main.o e1000_hw.o e1000_ethtool.o e1000_param.o
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+#define INTEL_E1000_ETHERNET_DEVICE(device_id) {\
+ PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+
+struct e1000_adapter;
+
+#include "e1000_hw.h"
+
+#define E1000_MAX_INTR 10
+
+/* TX/RX descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 256
+#define E1000_MIN_TXD 48
+#define E1000_MAX_82544_TXD 4096
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 256
+#define E1000_MIN_RXD 48
+#define E1000_MAX_82544_RXD 4096
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define E1000_RXBUFFER_128 128 /* Used for packet split */
+#define E1000_RXBUFFER_256 256 /* Used for packet split */
+#define E1000_RXBUFFER_512 512
+#define E1000_RXBUFFER_1024 1024
+#define E1000_RXBUFFER_2048 2048
+#define E1000_RXBUFFER_4096 4096
+#define E1000_RXBUFFER_8192 8192
+#define E1000_RXBUFFER_16384 16384
+
+/* SmartSpeed delimiters */
+#define E1000_SMARTSPEED_DOWNSHIFT 3
+#define E1000_SMARTSPEED_MAX 15
+
+/* Packet Buffer allocations */
+#define E1000_PBA_BYTES_SHIFT 0xA
+#define E1000_TX_HEAD_ADDR_SHIFT 7
+#define E1000_PBA_TX_MASK 0xFFFF0000
+
+/* Flow Control Watermarks */
+#define E1000_FC_HIGH_DIFF 0x1638 /* High: 5688 bytes below Rx FIFO size */
+#define E1000_FC_LOW_DIFF 0x1640 /* Low: 5696 bytes below Rx FIFO size */
+
+#define E1000_FC_PAUSE_TIME 0xFFFF /* pause for the max or until send xon */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define E1000_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_82544_APM 0x0004
+#define E1000_EEPROM_APME 0x0400
+
+#ifndef E1000_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define E1000_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct e1000_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct e1000_tx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ u16 tdh;
+ u16 tdt;
+ bool last_tx_tso;
+};
+
+struct e1000_rx_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *rx_skb_top;
+
+ /* cpu for rx queue */
+ int cpu;
+
+ u16 rdh;
+ u16 rdt;
+};
+
+#define E1000_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) \
+ ? 0 : (R)->count) + (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define E1000_RX_DESC_EXT(R, i) \
+ (&(((union e1000_rx_desc_extended *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+/* board specific private data structure */
+
+struct e1000_adapter {
+ struct timer_list tx_fifo_stall_timer;
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 wol;
+ u32 smartspeed;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+ spinlock_t stats_lock;
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ u8 fc_autoneg;
+
+ /* TX */
+ struct e1000_tx_ring *tx_ring; /* One per active queue */
+ unsigned int restart_queue;
+ u32 txd_cmd;
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+ u32 gotcl;
+ u64 gotcl_old;
+ u64 tpt_old;
+ u64 colc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u8 tx_timeout_factor;
+ atomic_t tx_fifo_stall;
+ bool pcix_82544;
+ bool detect_tx_hung;
+
+ /* RX */
+ bool (*clean_rx)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+ void (*alloc_rx_buf)(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+ struct e1000_rx_ring *rx_ring; /* One per active queue */
+ struct napi_struct napi;
+
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u32 alloc_rx_buff_failed;
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+ bool rx_csum;
+ u32 gorcl;
+ u64 gorcl_old;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct e1000_tx_ring test_tx_ring;
+ struct e1000_rx_ring test_rx_ring;
+
+ int msg_enable;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ bool tso_force;
+ bool smart_power_down; /* phy smart power down */
+ bool quad_port_a;
+ unsigned long flags;
+ u32 eeprom_wol;
+
+ /* for ioport free */
+ int bars;
+ int need_ioport;
+
+ bool discarding;
+
+ struct work_struct fifo_stall_task;
+ struct work_struct phy_info_task;
+};
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+extern struct net_device *e1000_get_hw_dev(struct e1000_hw *hw);
+#define e_dbg(format, arg...) \
+ netdev_dbg(e1000_get_hw_dev(hw), format, ## arg)
+#define e_err(msglvl, format, arg...) \
+ netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_info(msglvl, format, arg...) \
+ netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+ netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_notice(msglvl, format, arg...) \
+ netif_notice(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_dev_info(format, arg...) \
+ dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+ dev_warn(&adapter->pdev->dev, format, ## arg)
+#define e_dev_err(format, arg...) \
+ dev_err(&adapter->pdev->dev, format, ## arg)
+
+extern char e1000_driver_name[];
+extern const char e1000_driver_version[];
+
+extern int e1000_up(struct e1000_adapter *adapter);
+extern void e1000_down(struct e1000_adapter *adapter);
+extern void e1000_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000_reset(struct e1000_adapter *adapter);
+extern int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx);
+extern int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+extern int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+extern void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+extern void e1000_update_stats(struct e1000_adapter *adapter);
+extern bool e1000_has_link(struct e1000_adapter *adapter);
+extern void e1000_power_up_phy(struct e1000_adapter *);
+extern void e1000_set_ethtool_ops(struct net_device *netdev);
+extern void e1000_check_options(struct e1000_adapter *adapter);
+extern char *e1000_get_hw_dev_name(struct e1000_hw *hw);
+
+#endif /* _E1000_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include "e1000.h"
+#include <asm/uaccess.h>
+
+enum {NETDEV_STATS, E1000_STATS};
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(m) E1000_STATS, \
+ sizeof(((struct e1000_adapter *)0)->m), \
+ offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m) NETDEV_STATS, \
+ sizeof(((struct net_device *)0)->m), \
+ offsetof(struct net_device, m)
+
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ { "rx_packets", E1000_STAT(stats.gprc) },
+ { "tx_packets", E1000_STAT(stats.gptc) },
+ { "rx_bytes", E1000_STAT(stats.gorcl) },
+ { "tx_bytes", E1000_STAT(stats.gotcl) },
+ { "rx_broadcast", E1000_STAT(stats.bprc) },
+ { "tx_broadcast", E1000_STAT(stats.bptc) },
+ { "rx_multicast", E1000_STAT(stats.mprc) },
+ { "tx_multicast", E1000_STAT(stats.mptc) },
+ { "rx_errors", E1000_STAT(stats.rxerrc) },
+ { "tx_errors", E1000_STAT(stats.txerrc) },
+ { "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
+ { "multicast", E1000_STAT(stats.mprc) },
+ { "collisions", E1000_STAT(stats.colc) },
+ { "rx_length_errors", E1000_STAT(stats.rlerrc) },
+ { "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
+ { "rx_crc_errors", E1000_STAT(stats.crcerrs) },
+ { "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
+ { "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
+ { "rx_missed_errors", E1000_STAT(stats.mpc) },
+ { "tx_aborted_errors", E1000_STAT(stats.ecol) },
+ { "tx_carrier_errors", E1000_STAT(stats.tncrs) },
+ { "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+ { "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
+ { "tx_window_errors", E1000_STAT(stats.latecol) },
+ { "tx_abort_late_coll", E1000_STAT(stats.latecol) },
+ { "tx_deferred_ok", E1000_STAT(stats.dc) },
+ { "tx_single_coll_ok", E1000_STAT(stats.scc) },
+ { "tx_multi_coll_ok", E1000_STAT(stats.mcc) },
+ { "tx_timeout_count", E1000_STAT(tx_timeout_count) },
+ { "tx_restart_queue", E1000_STAT(restart_queue) },
+ { "rx_long_length_errors", E1000_STAT(stats.roc) },
+ { "rx_short_length_errors", E1000_STAT(stats.ruc) },
+ { "rx_align_errors", E1000_STAT(stats.algnerrc) },
+ { "tx_tcp_seg_good", E1000_STAT(stats.tsctc) },
+ { "tx_tcp_seg_failed", E1000_STAT(stats.tsctfc) },
+ { "rx_flow_control_xon", E1000_STAT(stats.xonrxc) },
+ { "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
+ { "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
+ { "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
+ { "rx_long_byte_count", E1000_STAT(stats.gorcl) },
+ { "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
+ { "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
+ { "alloc_rx_buff_failed", E1000_STAT(alloc_rx_buff_failed) },
+ { "tx_smbus", E1000_STAT(stats.mgptc) },
+ { "rx_smbus", E1000_STAT(stats.mgprc) },
+ { "dropped_smbus", E1000_STAT(stats.mgpdc) },
+};
+
+#define E1000_QUEUE_STATS_LEN 0
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN + E1000_QUEUE_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy_addr;
+
+ if (hw->mac_type == e1000_82543)
+ ecmd->transceiver = XCVR_EXTERNAL;
+ else
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+
+ if (hw->mac_type >= e1000_82545)
+ ecmd->transceiver = XCVR_INTERNAL;
+ else
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ if (er32(STATUS) & E1000_STATUS_LU) {
+
+ e1000_get_speed_and_duplex(hw, &adapter->link_speed,
+ &adapter->link_duplex);
+ ethtool_cmd_speed_set(ecmd, adapter->link_speed);
+
+ /* unfortunately FULL_DUPLEX != DUPLEX_FULL
+ * and HALF_DUPLEX != DUPLEX_HALF */
+
+ if (adapter->link_duplex == FULL_DUPLEX)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = ((hw->media_type == e1000_media_type_fiber) ||
+ hw->autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->autoneg = 1;
+ if (hw->media_type == e1000_media_type_fiber)
+ hw->autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->autoneg_advertised;
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return -EINVAL;
+ }
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+}
+
+static u32 e1000_get_link(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /*
+ * If the link is not reported up to netdev, interrupts are disabled,
+ * and so the physical link state may have changed since we last
+ * looked. Set get_link_status to make sure that the true link
+ * state is interrogated, rather than pulling a cached and possibly
+ * stale link state from the driver.
+ */
+ if (!netif_carrier_ok(netdev))
+ adapter->hw.get_link_status = 1;
+
+ return e1000_has_link(adapter);
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc == E1000_FC_RX_PAUSE)
+ pause->rx_pause = 1;
+ else if (hw->fc == E1000_FC_TX_PAUSE)
+ pause->tx_pause = 1;
+ else if (hw->fc == E1000_FC_FULL) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_FULL;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_RX_PAUSE;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc = E1000_FC_NONE;
+
+ hw->original_fc = hw->fc;
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ if (netif_running(adapter->netdev)) {
+ e1000_down(adapter);
+ e1000_up(adapter);
+ } else
+ e1000_reset(adapter);
+ } else
+ retval = ((hw->media_type == e1000_media_type_fiber) ?
+ e1000_setup_link(hw) : e1000_force_mac_fc(hw));
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return retval;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
+ void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = hw->phy_type; /* PHY type (IGP=1, M88=0) */
+ if (hw->phy_type == e1000_phy_igp) {
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_A);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_A &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_B);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_B &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[14] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_C);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_C &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[15] = (u32)phy_data; /* cable length */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_AGC_D);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_AGC_D &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[16] = (u32)phy_data; /* cable length */
+ regs_buff[17] = 0; /* extended 10bt distance (not needed) */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[18] = (u32)phy_data; /* cable polarity */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT,
+ IGP01E1000_PHY_PCS_INIT_REG);
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG &
+ IGP01E1000_PHY_PAGE_SELECT, &phy_data);
+ regs_buff[19] = (u32)phy_data; /* cable polarity */
+ regs_buff[20] = 0; /* polarity correction enabled (always) */
+ regs_buff[22] = 0; /* phy receive errors (unavailable) */
+ regs_buff[23] = regs_buff[18]; /* mdix mode */
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PAGE_SELECT, 0x0);
+ } else {
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = adapter->phy_stats.idle_errors; /* phy idle errors */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+ if (hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ regs_buff[26] = er32(MANC);
+ }
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ return hw->eeprom.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->eeprom.type == e1000_eeprom_spi)
+ ret_val = e1000_read_eeprom(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_eeprom(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->eeprom.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_eeprom(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_eeprom(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if ((ret_val == 0) && (first_word <= EEPROM_CHECKSUM_REG))
+ e1000_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+
+ strncpy(drvinfo->driver, e1000_driver_name, 32);
+ strncpy(drvinfo->version, e1000_driver_version, 32);
+
+ sprintf(firmware_version, "N/A");
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ struct e1000_rx_ring *rxdr = adapter->rx_ring;
+
+ ring->rx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_RXD :
+ E1000_MAX_82544_RXD;
+ ring->tx_max_pending = (mac_type < e1000_82544) ? E1000_MAX_TXD :
+ E1000_MAX_82544_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ e1000_mac_type mac_type = hw->mac_type;
+ struct e1000_tx_ring *txdr, *tx_old;
+ struct e1000_rx_ring *rxdr, *rx_old;
+ int i, err;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+
+ if (netif_running(adapter->netdev))
+ e1000_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ txdr = kcalloc(adapter->num_tx_queues, sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!txdr)
+ goto err_alloc_tx;
+
+ rxdr = kcalloc(adapter->num_rx_queues, sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!rxdr)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = txdr;
+ adapter->rx_ring = rxdr;
+
+ rxdr->count = max(ring->rx_pending,(u32)E1000_MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_RXD : E1000_MAX_82544_RXD));
+ rxdr->count = ALIGN(rxdr->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)E1000_MIN_TXD);
+ txdr->count = min(txdr->count,(u32)(mac_type < e1000_82544 ?
+ E1000_MAX_TXD : E1000_MAX_82544_TXD));
+ txdr->count = ALIGN(txdr->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ txdr[i].count = txdr->count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rxdr[i].count = rxdr->count;
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000_free_all_rx_resources(adapter);
+ e1000_free_all_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rxdr;
+ adapter->tx_ring = txdr;
+ err = e1000_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return 0;
+err_setup_tx:
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rxdr);
+err_alloc_rx:
+ kfree(txdr);
+err_alloc_tx:
+ e1000_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static const u32 test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(test); i++) {
+ writel(write & test[i], address);
+ read = readl(address);
+ if (read != (write & test[i] & mask)) {
+ e_err(drv, "pattern test reg %04X failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, read, (write & test[i] & mask));
+ *data = reg;
+ return true;
+ }
+ }
+ return false;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u8 __iomem *address = hw->hw_addr + reg;
+ u32 read;
+
+ writel(write & mask, address);
+ read = readl(address);
+ if ((read & mask) != (write & mask)) {
+ e_err(drv, "set/check reg %04X test failed: "
+ "got 0x%08X expected 0x%08X\n",
+ reg, (read & mask), (write & mask));
+ *data = reg;
+ return true;
+ }
+ return false;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, \
+ (hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg, \
+ mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u32 value, before, after;
+ u32 i, toggle;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+
+ /* there are several bits on newer hardware that are r/w */
+ toggle = 0xFFFFF833;
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ e_err(drv, "failed STATUS register test got: "
+ "0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ REG_PATTERN_TEST(FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(VET, 0x0000FFFF, 0xFFFFFFFF);
+
+ REG_PATTERN_TEST(RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = 0x06DFB3FE;
+ REG_SET_AND_CHECK(RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(TCTL, 0xFFFFFFFF, 0x00000000);
+
+ if (hw->mac_type >= e1000_82543) {
+
+ REG_SET_AND_CHECK(RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TIDV, 0x0000FFFF, 0x0000FFFF);
+ value = E1000_RAR_ENTRIES;
+ for (i = 0; i < value; i++) {
+ REG_PATTERN_TEST(RA + (((i << 1) + 1) << 2), 0x8003FFFF,
+ 0xFFFFFFFF);
+ }
+
+ } else {
+
+ REG_SET_AND_CHECK(RCTL, 0xFFFFFFFF, 0x01FFFFFF);
+ REG_PATTERN_TEST(RDBAL, 0xFFFFF000, 0xFFFFFFFF);
+ REG_PATTERN_TEST(TXCW, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(TDBAL, 0xFFFFF000, 0xFFFFFFFF);
+
+ }
+
+ value = E1000_MC_TBL_SIZE;
+ for (i = 0; i < value; i++)
+ REG_PATTERN_TEST(MTA + (i << 2), 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_eeprom(hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16)EEPROM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *)data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0;
+ bool shared_int = true;
+ u32 irq = adapter->pdev->irq;
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI interrupts here, yet */
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev))
+ shared_int = false;
+ else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ e_info(hw, "testing %s interrupt\n", (shared_int ?
+ "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (txdr->desc && txdr->buffer_info) {
+ for (i = 0; i < txdr->count; i++) {
+ if (txdr->buffer_info[i].dma)
+ dma_unmap_single(&pdev->dev,
+ txdr->buffer_info[i].dma,
+ txdr->buffer_info[i].length,
+ DMA_TO_DEVICE);
+ if (txdr->buffer_info[i].skb)
+ dev_kfree_skb(txdr->buffer_info[i].skb);
+ }
+ }
+
+ if (rxdr->desc && rxdr->buffer_info) {
+ for (i = 0; i < rxdr->count; i++) {
+ if (rxdr->buffer_info[i].dma)
+ dma_unmap_single(&pdev->dev,
+ rxdr->buffer_info[i].dma,
+ rxdr->buffer_info[i].length,
+ DMA_FROM_DEVICE);
+ if (rxdr->buffer_info[i].skb)
+ dev_kfree_skb(rxdr->buffer_info[i].skb);
+ }
+ }
+
+ if (txdr->desc) {
+ dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
+ txdr->dma);
+ txdr->desc = NULL;
+ }
+ if (rxdr->desc) {
+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ rxdr->desc = NULL;
+ }
+
+ kfree(txdr->buffer_info);
+ txdr->buffer_info = NULL;
+ kfree(rxdr->buffer_info);
+ rxdr->buffer_info = NULL;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 rctl;
+ int i, ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!txdr->count)
+ txdr->count = E1000_DEFAULT_TXD;
+
+ txdr->buffer_info = kcalloc(txdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!txdr->buffer_info) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+ txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
+ GFP_KERNEL);
+ if (!txdr->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ memset(txdr->desc, 0, txdr->size);
+ txdr->next_to_use = txdr->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64)txdr->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64)txdr->dma >> 32));
+ ew32(TDLEN, txdr->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_FDX_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < txdr->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*txdr, i);
+ struct sk_buff *skb;
+ unsigned int size = 1024;
+
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, size);
+ txdr->buffer_info[i].skb = skb;
+ txdr->buffer_info[i].length = skb->len;
+ txdr->buffer_info[i].dma =
+ dma_map_single(&pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ tx_desc->buffer_addr = cpu_to_le64(txdr->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RPS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rxdr->count)
+ rxdr->count = E1000_DEFAULT_RXD;
+
+ rxdr->buffer_info = kcalloc(rxdr->count, sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!rxdr->buffer_info) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc);
+ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
+ GFP_KERNEL);
+ if (!rxdr->desc) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+ rxdr->next_to_use = rxdr->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64)rxdr->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64)rxdr->dma >> 32));
+ ew32(RDLEN, rxdr->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rxdr->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rxdr->buffer_info[i].skb = skb;
+ rxdr->buffer_info[i].length = E1000_RXBUFFER_2048;
+ rxdr->buffer_info[i].dma =
+ dma_map_single(&pdev->dev, skb->data,
+ E1000_RXBUFFER_2048, DMA_FROM_DEVICE);
+ rx_desc->buffer_addr = cpu_to_le64(rxdr->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_write_phy_reg(hw, 29, 0x001F);
+ e1000_write_phy_reg(hw, 30, 0x8FFC);
+ e1000_write_phy_reg(hw, 29, 0x001A);
+ e1000_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static void e1000_phy_reset_clk_and_crs(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg;
+
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This
+ * value defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_EPSCR_TX_CLK_25;
+ e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL, phy_reg);
+
+ /* In addition, because of the s/w reset above, we need to enable
+ * CRS on TX. This must be set for both full and half duplex
+ * operation.
+ */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+ phy_reg |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, phy_reg);
+}
+
+static int e1000_nonintegrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg;
+ u16 phy_reg;
+
+ /* Setup the Device Control Register for PHY loopback test. */
+
+ ctrl_reg = er32(CTRL);
+ ctrl_reg |= (E1000_CTRL_ILOS | /* Invert Loss-Of-Signal */
+ E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 | /* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Read the PHY Specific Control Register (0x10) */
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_reg);
+
+ /* Clear Auto-Crossover bits in PHY Specific Control Register
+ * (bits 6:5).
+ */
+ phy_reg &= ~M88E1000_PSCR_AUTO_X_MODE;
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_reg);
+
+ /* Perform software reset on the PHY */
+ e1000_phy_reset(hw);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8100);
+
+ /* Wait for reset to complete. */
+ udelay(500);
+
+ /* Have to setup TX_CLK and TX_CRS after software reset */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1000_phy_disable_receiver(adapter);
+
+ /* Set the loopback bit in the PHY control register. */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+
+ /* Setup TX_CLK and TX_CRS one more time. */
+ e1000_phy_reset_clk_and_crs(adapter);
+
+ /* Check Phy Configuration */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg != 0x4100)
+ return 9;
+
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_reg);
+ if (phy_reg != 0x0070)
+ return 10;
+
+ e1000_read_phy_reg(hw, 29, &phy_reg);
+ if (phy_reg != 0x001A)
+ return 11;
+
+ return 0;
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u32 stat_reg = 0;
+
+ hw->autoneg = false;
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ e1000_write_phy_reg(hw,
+ M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x9140);
+ /* autoneg off */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x8140);
+ }
+
+ ctrl_reg = er32(CTRL);
+
+ /* force 1000, set loopback */
+ e1000_write_phy_reg(hw, PHY_CTRL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (hw->media_type == e1000_media_type_copper &&
+ hw->phy_type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ else {
+ /* Set the ILOS bit on the fiber Nic is half
+ * duplex link is detected. */
+ stat_reg = er32(STATUS);
+ if ((stat_reg & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy_type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_reg = 0;
+ u16 count = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->media_type == e1000_media_type_copper) {
+ /* Attempt to setup Loopback mode on Non-integrated PHY.
+ * Some PHY registers get corrupted at random, so
+ * attempt this 10 times.
+ */
+ while (e1000_nonintegrated_phy_loopback(adapter) &&
+ count++ < 10);
+ if (count < 11)
+ return 0;
+ }
+ break;
+
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ return e1000_integrated_phy_loopback(adapter);
+ break;
+ default:
+ /* Default PHY loopback work is to read the MII
+ * control register and assert bit 14 (loopback mode).
+ */
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ phy_reg |= MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ return 0;
+ break;
+ }
+
+ return 8;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ return e1000_set_phy_loopback(adapter);
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->media_type == e1000_media_type_copper)
+ return e1000_set_phy_loopback(adapter);
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac_type) {
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ default:
+ hw->autoneg = true;
+ e1000_read_phy_reg(hw, PHY_CTRL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_reg);
+ e1000_phy_reset(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *txdr = &adapter->test_tx_ring;
+ struct e1000_rx_ring *rxdr = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i, j, k, l, lc, good_cnt, ret_val=0;
+ unsigned long time;
+
+ ew32(RDT, rxdr->count - 1);
+
+ /* Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rxdr->count <= txdr->count)
+ lc = ((txdr->count / 64) * 2) + 1;
+ else
+ lc = ((rxdr->count / 64) * 2) + 1;
+
+ k = l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(txdr->buffer_info[i].skb,
+ 1024);
+ dma_sync_single_for_device(&pdev->dev,
+ txdr->buffer_info[k].dma,
+ txdr->buffer_info[k].length,
+ DMA_TO_DEVICE);
+ if (unlikely(++k == txdr->count)) k = 0;
+ }
+ ew32(TDT, k);
+ E1000_WRITE_FLUSH();
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ dma_sync_single_for_cpu(&pdev->dev,
+ rxdr->buffer_info[l].dma,
+ rxdr->buffer_info[l].length,
+ DMA_FROM_DEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rxdr->buffer_info[l].skb,
+ 1024);
+ if (!ret_val)
+ good_cnt++;
+ if (unlikely(++l == rxdr->count)) l = 0;
+ /* time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while (good_cnt < 64 && jiffies < (time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 2)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ e1000_check_for_link(hw);
+ if (hw->serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ e1000_check_for_link(hw);
+ if (hw->autoneg) /* if auto_neg is set wait for it */
+ msleep(4000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ *data = 1;
+ }
+ }
+ return *data;
+}
+
+static int e1000_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->flags);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ u16 autoneg_advertised = hw->autoneg_advertised;
+ u8 forced_speed_duplex = hw->forced_speed_duplex;
+ u8 autoneg = hw->autoneg;
+
+ e_info(hw, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ e1000_reset(adapter);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000_reset(adapter);
+ /* make sure the phy is powered up */
+ e1000_power_up_phy(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ hw->autoneg_advertised = autoneg_advertised;
+ hw->forced_speed_duplex = forced_speed_duplex;
+ hw->autoneg = autoneg;
+
+ e1000_reset(adapter);
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ e_info(hw, "online testing starting\n");
+ /* Online tests */
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__E1000_TESTING, &adapter->flags);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int e1000_wol_exclusion(struct e1000_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_PCIE:
+ /* these don't support WoL at all */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events not supported on port B */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* quad port adapters only support WoL on port A */
+ if (!adapter->quad_port_a) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1 &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* KSP3 does not suppport UCAST wake-ups */
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ e_err(drv, "Interface does not support directed "
+ "(unicast) frame wake-up packets\n");
+ break;
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (e1000_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ if (wol->wolopts & WAKE_UCAST) {
+ e_err(drv, "Interface does not support directed "
+ "(unicast) frame wake-up packets\n");
+ return -EOPNOTSUPP;
+ }
+ break;
+ default:
+ break;
+ }
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+static int e1000_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ e1000_setup_led(hw);
+ return 2;
+
+ case ETHTOOL_ID_ON:
+ e1000_led_on(hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ e1000_led_off(hw);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ e1000_cleanup_led(hw);
+ }
+
+ return 0;
+}
+
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->hw.mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if (adapter->itr_setting <= 4)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac_type < e1000_82545)
+ return -EOPNOTSUPP;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 4) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs == 4) {
+ adapter->itr = adapter->itr_setting = 4;
+ } else if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p = NULL;
+
+ e1000_update_stats(adapter);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ switch (e1000_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) netdev +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ case E1000_STATS:
+ p = (char *) adapter +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+/* BUG_ON(i != E1000_STATS_LEN); */
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *e1000_gstrings_test,
+ sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != E1000_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = e1000_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .set_phys_id = e1000_set_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
+};
+
+void e1000_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+ */
+
+/* e1000_hw.c
+ * Shared functions for accessing and configuring the MAC
+ */
+
+#include "e1000.h"
+
+static s32 e1000_check_downshift(struct e1000_hw *hw);
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity);
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw);
+static void e1000_clear_vfta(struct e1000_hw *hw);
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw,
+ bool link_up);
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw);
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw);
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw);
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length);
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_id_led_init(struct e1000_hw *hw);
+static void e1000_init_rx_addrs(struct e1000_hw *hw);
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info);
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value);
+static s32 e1000_set_phy_type(struct e1000_hw *hw);
+static void e1000_phy_init_script(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw);
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw);
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl);
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count);
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw);
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw);
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw);
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd);
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count);
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data);
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data);
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count);
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw);
+static void e1000_release_eeprom(struct e1000_hw *hw);
+static void e1000_standby_eeprom(struct e1000_hw *hw);
+static s32 e1000_set_vco_speed(struct e1000_hw *hw);
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw);
+static s32 e1000_set_phy_mode(struct e1000_hw *hw);
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data);
+
+/* IGP cable length table */
+static const
+u16 e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = {
+ 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 10, 10, 10, 10, 10, 10, 10, 20, 20, 20, 20, 20, 25, 25, 25,
+ 25, 25, 25, 25, 30, 30, 30, 30, 40, 40, 40, 40, 40, 40, 40, 40,
+ 40, 50, 50, 50, 50, 50, 50, 50, 60, 60, 60, 60, 60, 60, 60, 60,
+ 60, 70, 70, 70, 70, 70, 70, 80, 80, 80, 80, 80, 80, 90, 90, 90,
+ 90, 90, 90, 90, 90, 90, 100, 100, 100, 100, 100, 100, 100, 100, 100,
+ 100,
+ 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110,
+ 110, 110,
+ 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120,
+ 120, 120
+};
+
+static DEFINE_SPINLOCK(e1000_eeprom_lock);
+
+/**
+ * e1000_set_phy_type - Set the phy type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_set_phy_type(struct e1000_hw *hw)
+{
+ e_dbg("e1000_set_phy_type");
+
+ if (hw->mac_type == e1000_undefined)
+ return -E1000_ERR_PHY_TYPE;
+
+ switch (hw->phy_id) {
+ case M88E1000_E_PHY_ID:
+ case M88E1000_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ case M88E1118_E_PHY_ID:
+ hw->phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID:
+ if (hw->mac_type == e1000_82541 ||
+ hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82547_rev_2)
+ hw->phy_type = e1000_phy_igp;
+ break;
+ case RTL8211B_PHY_ID:
+ hw->phy_type = e1000_phy_8211;
+ break;
+ case RTL8201N_PHY_ID:
+ hw->phy_type = e1000_phy_8201;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ hw->phy_type = e1000_phy_undefined;
+ return -E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_init_script - IGP phy init script - initializes the GbE PHY
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_phy_init_script(struct e1000_hw *hw)
+{
+ u32 ret_val;
+ u16 phy_saved_data;
+
+ e_dbg("e1000_phy_init_script");
+
+ if (hw->phy_init_script) {
+ msleep(20);
+
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of this routine. */
+ ret_val = e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ /* Disabled the PHY transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+ msleep(20);
+
+ e1000_write_phy_reg(hw, 0x0000, 0x0140);
+ msleep(5);
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ e1000_write_phy_reg(hw, 0x1F95, 0x0001);
+ e1000_write_phy_reg(hw, 0x1F71, 0xBD21);
+ e1000_write_phy_reg(hw, 0x1F79, 0x0018);
+ e1000_write_phy_reg(hw, 0x1F30, 0x1600);
+ e1000_write_phy_reg(hw, 0x1F31, 0x0014);
+ e1000_write_phy_reg(hw, 0x1F32, 0x161C);
+ e1000_write_phy_reg(hw, 0x1F94, 0x0003);
+ e1000_write_phy_reg(hw, 0x1F96, 0x003F);
+ e1000_write_phy_reg(hw, 0x2010, 0x0008);
+ break;
+
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ e1000_write_phy_reg(hw, 0x1F73, 0x0099);
+ break;
+ default:
+ break;
+ }
+
+ e1000_write_phy_reg(hw, 0x0000, 0x3300);
+ msleep(20);
+
+ /* Now enable the transmitter */
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (hw->mac_type == e1000_82547) {
+ u16 fused, fine, coarse;
+
+ /* Move to analog registers page */
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_SPARE_FUSE_STATUS,
+ &fused);
+
+ if (!(fused & IGP01E1000_ANALOG_SPARE_FUSE_ENABLED)) {
+ e1000_read_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_STATUS,
+ &fused);
+
+ fine = fused & IGP01E1000_ANALOG_FUSE_FINE_MASK;
+ coarse =
+ fused & IGP01E1000_ANALOG_FUSE_COARSE_MASK;
+
+ if (coarse >
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH) {
+ coarse -=
+ IGP01E1000_ANALOG_FUSE_COARSE_10;
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_1;
+ } else if (coarse ==
+ IGP01E1000_ANALOG_FUSE_COARSE_THRESH)
+ fine -= IGP01E1000_ANALOG_FUSE_FINE_10;
+
+ fused =
+ (fused & IGP01E1000_ANALOG_FUSE_POLY_MASK) |
+ (fine & IGP01E1000_ANALOG_FUSE_FINE_MASK) |
+ (coarse &
+ IGP01E1000_ANALOG_FUSE_COARSE_MASK);
+
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_CONTROL,
+ fused);
+ e1000_write_phy_reg(hw,
+ IGP01E1000_ANALOG_FUSE_BYPASS,
+ IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL);
+ }
+ }
+ }
+}
+
+/**
+ * e1000_set_mac_type - Set the mac type member in the hw struct.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_set_mac_type(struct e1000_hw *hw)
+{
+ e_dbg("e1000_set_mac_type");
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82542:
+ switch (hw->revision_id) {
+ case E1000_82542_2_0_REV_ID:
+ hw->mac_type = e1000_82542_rev2_0;
+ break;
+ case E1000_82542_2_1_REV_ID:
+ hw->mac_type = e1000_82542_rev2_1;
+ break;
+ default:
+ /* Invalid 82542 revision ID */
+ return -E1000_ERR_MAC_TYPE;
+ }
+ break;
+ case E1000_DEV_ID_82543GC_FIBER:
+ case E1000_DEV_ID_82543GC_COPPER:
+ hw->mac_type = e1000_82543;
+ break;
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ hw->mac_type = e1000_82544;
+ break;
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ hw->mac_type = e1000_82540;
+ break;
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ hw->mac_type = e1000_82545;
+ break;
+ case E1000_DEV_ID_82545GM_COPPER:
+ case E1000_DEV_ID_82545GM_FIBER:
+ case E1000_DEV_ID_82545GM_SERDES:
+ hw->mac_type = e1000_82545_rev_3;
+ break;
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ hw->mac_type = e1000_82546;
+ break;
+ case E1000_DEV_ID_82546GB_COPPER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ case E1000_DEV_ID_82546GB_SERDES:
+ case E1000_DEV_ID_82546GB_PCIE:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER:
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ hw->mac_type = e1000_82546_rev_3;
+ break;
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER_LOM:
+ hw->mac_type = e1000_82541;
+ break;
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ hw->mac_type = e1000_82541_rev_2;
+ break;
+ case E1000_DEV_ID_82547EI:
+ case E1000_DEV_ID_82547EI_MOBILE:
+ hw->mac_type = e1000_82547;
+ break;
+ case E1000_DEV_ID_82547GI:
+ hw->mac_type = e1000_82547_rev_2;
+ break;
+ case E1000_DEV_ID_INTEL_CE4100_GBE:
+ hw->mac_type = e1000_ce4100;
+ break;
+ default:
+ /* Should never have loaded on this device */
+ return -E1000_ERR_MAC_TYPE;
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->asf_firmware_present = true;
+ break;
+ default:
+ break;
+ }
+
+ /* The 82543 chip does not count tx_carrier_errors properly in
+ * FD mode
+ */
+ if (hw->mac_type == e1000_82543)
+ hw->bad_tx_carr_stats_fd = true;
+
+ if (hw->mac_type > e1000_82544)
+ hw->has_smbus = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_media_type - Set media type and TBI compatibility.
+ * @hw: Struct containing variables accessed by shared code
+ */
+void e1000_set_media_type(struct e1000_hw *hw)
+{
+ u32 status;
+
+ e_dbg("e1000_set_media_type");
+
+ if (hw->mac_type != e1000_82543) {
+ /* tbi_compatibility is only valid on 82543 */
+ hw->tbi_compatibility_en = false;
+ }
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82545GM_SERDES:
+ case E1000_DEV_ID_82546GB_SERDES:
+ hw->media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->media_type = e1000_media_type_fiber;
+ break;
+ case e1000_ce4100:
+ hw->media_type = e1000_media_type_copper;
+ break;
+ default:
+ status = er32(STATUS);
+ if (status & E1000_STATUS_TBIMODE) {
+ hw->media_type = e1000_media_type_fiber;
+ /* tbi_compatibility not valid on fiber */
+ hw->tbi_compatibility_en = false;
+ } else {
+ hw->media_type = e1000_media_type_copper;
+ }
+ break;
+ }
+ }
+}
+
+/**
+ * e1000_reset_hw: reset the hardware completely
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ */
+s32 e1000_reset_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 icr;
+ u32 manc;
+ u32 led_ctrl;
+ s32 ret_val;
+
+ e_dbg("e1000_reset_hw");
+
+ /* For 82542 (rev 2.0), disable MWI before issuing a device reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ e_dbg("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH();
+
+ /* The tbi_compatibility_on Flag must be cleared when Rctl is cleared. */
+ hw->tbi_compatibility_on = false;
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = er32(CTRL);
+
+ /* Must reset the PHY before resetting the MAC */
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ ew32(CTRL, (ctrl | E1000_CTRL_PHY_RST));
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ e_dbg("Issuing a global reset to MAC\n");
+
+ switch (hw->mac_type) {
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82546:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ /* These controllers can't ack the 64-bit write when issuing the
+ * reset, so use IO-mapping as a workaround to issue the reset */
+ E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ /* Reset is performed on a shadow of the control register */
+ ew32(CTRL_DUP, (ctrl | E1000_CTRL_RST));
+ break;
+ case e1000_ce4100:
+ default:
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ break;
+ }
+
+ /* After MAC reset, force reload of EEPROM to restore power-on settings to
+ * device. Later controllers reload the EEPROM automatically, so just wait
+ * for reload to complete.
+ */
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* Wait for reset to complete */
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ /* Wait for EEPROM reload */
+ msleep(2);
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ /* Wait for EEPROM reload */
+ msleep(20);
+ break;
+ default:
+ /* Auto read done will delay 5ms or poll based on mac type */
+ ret_val = e1000_get_auto_rd_done(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ /* Disable HW ARPs on ASF enabled adapters */
+ if (hw->mac_type >= e1000_82540) {
+ manc = er32(MANC);
+ manc &= ~(E1000_MANC_ARP_EN);
+ ew32(MANC, manc);
+ }
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ e1000_phy_init_script(hw);
+
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr = er32(ICR);
+
+ /* If MWI was previously enabled, reenable it. */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_hw: Performs basic configuration of the adapter.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes that the controller has previously been reset and is in a
+ * post-reset uninitialized state. Initializes the receive address registers,
+ * multicast table, and VLAN filter table. Calls routines to setup link
+ * configuration and flow control settings. Clears all on-chip counters. Leaves
+ * the transmit and receive units disabled and uninitialized.
+ */
+s32 e1000_init_hw(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+ s32 ret_val;
+ u32 mta_size;
+ u32 ctrl_ext;
+
+ e_dbg("e1000_init_hw");
+
+ /* Initialize Identification LED */
+ ret_val = e1000_id_led_init(hw);
+ if (ret_val) {
+ e_dbg("Error Initializing Identification LED\n");
+ return ret_val;
+ }
+
+ /* Set the media type and TBI compatibility */
+ e1000_set_media_type(hw);
+
+ /* Disabling VLAN filtering. */
+ e_dbg("Initializing the IEEE VLAN\n");
+ if (hw->mac_type < e1000_82545_rev_3)
+ ew32(VET, 0);
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ e_dbg("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ ew32(RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH();
+ msleep(5);
+ }
+
+ /* Setup the receive address. This involves initializing all of the Receive
+ * Address Registers (RARs 0 - 15).
+ */
+ e1000_init_rx_addrs(hw);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->mac_type == e1000_82542_rev2_0) {
+ ew32(RCTL, 0);
+ E1000_WRITE_FLUSH();
+ msleep(1);
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ e_dbg("Zeroing the MTA\n");
+ mta_size = E1000_MC_TBL_SIZE;
+ for (i = 0; i < mta_size; i++) {
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, 0);
+ /* use write flush to prevent Memory Write Block (MWB) from
+ * occurring when accessing our register space */
+ E1000_WRITE_FLUSH();
+ }
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives. Valid only on
+ * 82542 and 82543 silicon.
+ */
+ if (hw->dma_fairness && hw->mac_type <= e1000_82543) {
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ /* Workaround for PCI-X problem when BIOS sets MMRBC incorrectly. */
+ if (hw->bus_type == e1000_bus_type_pcix
+ && e1000_pcix_get_mmrbc(hw) > 2048)
+ e1000_pcix_set_mmrbc(hw, 2048);
+ break;
+ }
+
+ /* Call a subroutine to configure the link and setup flow control. */
+ ret_val = e1000_setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ if (hw->mac_type > e1000_82544) {
+ ctrl = er32(TXDCTL);
+ ctrl =
+ (ctrl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ ew32(TXDCTL, ctrl);
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs(hw);
+
+ if (hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER ||
+ hw->device_id == E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3) {
+ ctrl_ext = er32(CTRL_EXT);
+ /* Relaxed ordering must be disabled to avoid a parity
+ * error crash in a PCI slot. */
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_adjust_serdes_amplitude - Adjust SERDES output amplitude based on EEPROM setting.
+ * @hw: Struct containing variables accessed by shared code.
+ */
+static s32 e1000_adjust_serdes_amplitude(struct e1000_hw *hw)
+{
+ u16 eeprom_data;
+ s32 ret_val;
+
+ e_dbg("e1000_adjust_serdes_amplitude");
+
+ if (hw->media_type != e1000_media_type_internal_serdes)
+ return E1000_SUCCESS;
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ ret_val = e1000_read_eeprom(hw, EEPROM_SERDES_AMPLITUDE, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if (eeprom_data != EEPROM_RESERVED_WORD) {
+ /* Adjust SERDES output amplitude only. */
+ eeprom_data &= EEPROM_SERDES_AMPLITUDE_MASK;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_EXT_CTRL, eeprom_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_link - Configures flow control and link settings.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Determines which flow control settings to use. Calls the appropriate media-
+ * specific link configuration function. Configures the flow control settings.
+ * Assuming the adapter has a valid link partner, a valid link should be
+ * established. Assumes the hardware has previously been reset and the
+ * transmitter and receiver are not enabled.
+ */
+s32 e1000_setup_link(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+ s32 ret_val;
+ u16 eeprom_data;
+
+ e_dbg("e1000_setup_link");
+
+ /* Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ if (hw->fc == E1000_FC_DEFAULT) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc = E1000_FC_NONE;
+ else if ((eeprom_data & EEPROM_WORD0F_PAUSE_MASK) ==
+ EEPROM_WORD0F_ASM_DIR)
+ hw->fc = E1000_FC_TX_PAUSE;
+ else
+ hw->fc = E1000_FC_FULL;
+ }
+
+ /* We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ hw->fc &= (~E1000_FC_TX_PAUSE);
+
+ if ((hw->mac_type < e1000_82543) && (hw->report_tx_early == 1))
+ hw->fc &= (~E1000_FC_RX_PAUSE);
+
+ hw->original_fc = hw->fc;
+
+ e_dbg("After fix-ups FlowControl is now = %x\n", hw->fc);
+
+ /* Take the 4 bits from EEPROM word 0x0F that determine the initial
+ * polarity value for the SW controlled pins, and setup the
+ * Extended Device Control reg with that info.
+ * This is needed because one of the SW controlled pins is used for
+ * signal detection. So this should be done before e1000_setup_pcs_link()
+ * or e1000_phy_setup() is called.
+ */
+ if (hw->mac_type == e1000_82543) {
+ ret_val = e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG,
+ 1, &eeprom_data);
+ if (ret_val) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ ctrl_ext = ((eeprom_data & EEPROM_WORD0F_SWPDIO_EXT) <<
+ SWDPIO__EXT_SHIFT);
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = (hw->media_type == e1000_media_type_copper) ?
+ e1000_setup_copper_link(hw) : e1000_setup_fiber_serdes_link(hw);
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ e_dbg("Initializing the Flow Control address, type and timer regs\n");
+
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ ew32(FCTTV, hw->fc_pause_time);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc & E1000_FC_TX_PAUSE)) {
+ ew32(FCRTL, 0);
+ ew32(FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water marks
+ * as well as (optionally) enabling the transmission of XON frames.
+ */
+ if (hw->fc_send_xon) {
+ ew32(FCRTL, (hw->fc_low_water | E1000_FCRTL_XONE));
+ ew32(FCRTH, hw->fc_high_water);
+ } else {
+ ew32(FCRTL, hw->fc_low_water);
+ ew32(FCRTH, hw->fc_high_water);
+ }
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_setup_fiber_serdes_link - prepare fiber or serdes link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Manipulates Physical Coding Sublayer functions in order to configure
+ * link. Assumes the hardware has been previously reset and the transmitter
+ * and receiver are not enabled.
+ */
+static s32 e1000_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 status;
+ u32 txcw = 0;
+ u32 i;
+ u32 signal = 0;
+ s32 ret_val;
+
+ e_dbg("e1000_setup_fiber_serdes_link");
+
+ /* On adapters with a MAC newer than 82544, SWDP 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ * If we're on serdes media, adjust the output amplitude to value
+ * set in the EEPROM.
+ */
+ ctrl = er32(CTRL);
+ if (hw->media_type == e1000_media_type_fiber)
+ signal = (hw->mac_type > e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+
+ ret_val = e1000_adjust_serdes_amplitude(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Take the link out of reset */
+ ctrl &= ~(E1000_CTRL_LRST);
+
+ /* Adjust VCO speed to improve BER performance */
+ ret_val = e1000_set_vco_speed(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000_config_collision_dist(hw);
+
+ /* Check for a software override of the flow control settings, and setup
+ * the device accordingly. If auto-negotiation is enabled, then software
+ * will have to set the "PAUSE" bits to the correct value in the Tranmsit
+ * Config Word Register (TXCW) and re-start auto-negotiation. However, if
+ * auto-negotiation is disabled, then software will have to manually
+ * configure the two flow control enable bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames, but
+ * not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we do
+ * not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ /* Flow control is completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case E1000_FC_RX_PAUSE:
+ /* RX Flow control is enabled and TX Flow control is disabled by a
+ * software over-ride. Since there really isn't a way to advertise
+ * that we are capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case E1000_FC_TX_PAUSE:
+ /* TX Flow control is enabled, and RX Flow control is disabled, by a
+ * software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case E1000_FC_FULL:
+ /* Flow control (both RX and TX) is enabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* Since auto-negotiation is enabled, take the link out of reset (the link
+ * will be in reset, because we previously reset the chip). This will
+ * restart auto-negotiation. If auto-negotiation is successful then the
+ * link-up status bit will be set and the flow control enable bits (RFCE
+ * and TFCE) will be set according to their negotiated value.
+ */
+ e_dbg("Auto-negotiation enabled\n");
+
+ ew32(TXCW, txcw);
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ hw->txcw = txcw;
+ msleep(1);
+
+ /* If we have a signal (the cable is plugged in) then poll for a "Link-Up"
+ * indication in the Device Status Register. Time-out if a link isn't
+ * seen in 500 milliseconds seconds (Auto-negotiation should complete in
+ * less than 500 milliseconds even if the other end is doing it in SW).
+ * For internal serdes, we just assume a signal is present, then poll.
+ */
+ if (hw->media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1) == signal) {
+ e_dbg("Looking for Link\n");
+ for (i = 0; i < (LINK_UP_TIMEOUT / 10); i++) {
+ msleep(10);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == (LINK_UP_TIMEOUT / 10)) {
+ e_dbg("Never got a valid link from auto-neg!!!\n");
+ hw->autoneg_failed = 1;
+ /* AutoNeg failed to achieve a link, so we'll call
+ * e1000_check_for_link. This routine will force the link up if
+ * we detect a signal. This will allow us to communicate with
+ * non-autonegotiating link partners.
+ */
+ ret_val = e1000_check_for_link(hw);
+ if (ret_val) {
+ e_dbg("Error while checking for link\n");
+ return ret_val;
+ }
+ hw->autoneg_failed = 0;
+ } else {
+ hw->autoneg_failed = 0;
+ e_dbg("Valid Link Found\n");
+ }
+ } else {
+ e_dbg("No Signal Detected\n");
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_rtl_setup - Copper link setup for e1000_phy_rtl series.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Commits changes to PHY configuration by calling e1000_phy_reset().
+ */
+static s32 e1000_copper_link_rtl_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ /* SW reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ e_dbg("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+static s32 gbe_dhg_phy_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 ctrl_aux;
+
+ switch (hw->phy_type) {
+ case e1000_phy_8211:
+ ret_val = e1000_copper_link_rtl_setup(hw);
+ if (ret_val) {
+ e_dbg("e1000_copper_link_rtl_setup failed!\n");
+ return ret_val;
+ }
+ break;
+ case e1000_phy_8201:
+ /* Set RMII mode */
+ ctrl_aux = er32(CTL_AUX);
+ ctrl_aux |= E1000_CTL_AUX_RMII;
+ ew32(CTL_AUX, ctrl_aux);
+ E1000_WRITE_FLUSH();
+
+ /* Disable the J/K bits required for receive */
+ ctrl_aux = er32(CTL_AUX);
+ ctrl_aux |= 0x4;
+ ctrl_aux &= ~0x2;
+ ew32(CTL_AUX, ctrl_aux);
+ E1000_WRITE_FLUSH();
+ ret_val = e1000_copper_link_rtl_setup(hw);
+
+ if (ret_val) {
+ e_dbg("e1000_copper_link_rtl_setup failed!\n");
+ return ret_val;
+ }
+ break;
+ default:
+ e_dbg("Error Resetting the PHY\n");
+ return E1000_ERR_PHY_TYPE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_preconfig - early configuration for copper
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Make sure we have a valid PHY and change PHY mode before link setup.
+ */
+static s32 e1000_copper_link_preconfig(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_copper_link_preconfig");
+
+ ctrl = er32(CTRL);
+ /* With 82543, we need to force speed and duplex on the MAC equal to what
+ * the PHY speed and duplex configuration is. In addition, we need to
+ * perform a hardware reset on the PHY to take it out of reset.
+ */
+ if (hw->mac_type > e1000_82543) {
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+ } else {
+ ctrl |=
+ (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU);
+ ew32(CTRL, ctrl);
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Make sure we have a valid PHY */
+ ret_val = e1000_detect_gig_phy(hw);
+ if (ret_val) {
+ e_dbg("Error, did not detect valid phy.\n");
+ return ret_val;
+ }
+ e_dbg("Phy ID = %x\n", hw->phy_id);
+
+ /* Set PHY to class A mode (if necessary) */
+ ret_val = e1000_set_phy_mode(hw);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82545_rev_3) ||
+ (hw->mac_type == e1000_82546_rev_3)) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ phy_data |= 0x00000008;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ }
+
+ if (hw->mac_type <= e1000_82543 ||
+ hw->mac_type == e1000_82541 || hw->mac_type == e1000_82547 ||
+ hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2)
+ hw->phy_reset_disable = false;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_igp_setup - Copper link setup for e1000_phy_igp series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_igp_setup(struct e1000_hw *hw)
+{
+ u32 led_ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_copper_link_igp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ e_dbg("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Wait 15ms for MAC to configure PHY from eeprom settings */
+ msleep(15);
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+
+ /* The NVM settings will configure LPLU in D3 for IGP2 and IGP3 PHYs */
+ if (hw->phy_type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ ret_val = e1000_set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ e_dbg("Error Disabling LPLU D3\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure mdi-mdix settings */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ hw->dsp_config_state = e1000_dsp_config_disabled;
+ /* Force MDI for earlier revs of the IGP PHY */
+ phy_data &=
+ ~(IGP01E1000_PSCR_AUTO_MDIX |
+ IGP01E1000_PSCR_FORCE_MDI_MDIX);
+ hw->mdix = 1;
+
+ } else {
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ phy_data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ }
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->autoneg) {
+ e1000_ms_type phy_ms_setting = hw->master_slave;
+
+ if (hw->ffe_config_state == e1000_ffe_config_active)
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+
+ if (hw->dsp_config_state == e1000_dsp_config_activated)
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+
+ /* when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default. */
+ if (hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ /* Set auto Master/Slave resolution process */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ ret_val =
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ?
+ ((phy_data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) : e1000_ms_auto;
+
+ switch (phy_ms_setting) {
+ case e1000_ms_force_master:
+ phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ phy_data |= CR_1000T_MS_ENABLE;
+ phy_data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ phy_data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_mgp_setup - Copper link setup for e1000_phy_m88 series.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_copper_link_mgp_setup(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_copper_link_mgp_setup");
+
+ if (hw->phy_reset_disable)
+ return E1000_SUCCESS;
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /* Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (hw->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /* Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (hw->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_revision < M88E1011_I_REV_4) {
+ /* Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((hw->phy_revision == E1000_REVISION_2) &&
+ (hw->phy_id == M88E1111_I_PHY_ID)) {
+ /* Vidalia Phy, set the downshift counter to 5x */
+ phy_data &= ~(M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK);
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ ret_val = e1000_write_phy_reg(hw,
+ M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000_phy_reset(hw);
+ if (ret_val) {
+ e_dbg("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_autoneg - setup auto-neg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Setup auto-negotiation and flow control advertisements,
+ * and then perform auto-negotiation.
+ */
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_copper_link_autoneg");
+
+ /* Perform some bounds checking on the hw->autoneg_advertised
+ * parameter. If this variable is zero, then set it to the default.
+ */
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (hw->autoneg_advertised == 0)
+ hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /* IFE/RTL8201N PHY only supports 10/100 */
+ if (hw->phy_type == e1000_phy_8201)
+ hw->autoneg_advertised &= AUTONEG_ADVERTISE_10_100_ALL;
+
+ e_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ e_dbg("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ e_dbg("Restarting Auto-Neg\n");
+
+ /* Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (hw->wait_autoneg_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ e_dbg
+ ("Error while waiting for autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->get_link_status = true;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_copper_link_postconfig - post link setup
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Config the MAC and the PHY after link is up.
+ * 1) Set up the MAC to the current PHY speed/duplex
+ * if we are on 82543. If we
+ * are on newer silicon, we only need to configure
+ * collision distance in the Transmit Control Register.
+ * 2) Set up flow control on the MAC to that established with
+ * the link partner.
+ * 3) Config DSP to improve Gigabit link quality for some PHY revisions.
+ */
+static s32 e1000_copper_link_postconfig(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ e_dbg("e1000_copper_link_postconfig");
+
+ if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100)) {
+ e1000_config_collision_dist(hw);
+ } else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ e_dbg("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error Configuring Flow Control\n");
+ return ret_val;
+ }
+
+ /* Config DSP to improve Giga link quality */
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_config_dsp_after_link_change(hw, true);
+ if (ret_val) {
+ e_dbg("Error Configuring DSP after link up\n");
+ return ret_val;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_copper_link - phy/speed/duplex setting
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Detects which PHY is present and sets up the speed and duplex
+ */
+static s32 e1000_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ e_dbg("e1000_setup_copper_link");
+
+ /* Check if it is a valid PHY and set PHY mode if necessary. */
+ ret_val = e1000_copper_link_preconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_copper_link_igp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_copper_link_mgp_setup(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ ret_val = gbe_dhg_phy_setup(hw);
+ if (ret_val) {
+ e_dbg("gbe_dhg_phy_setup failed!\n");
+ return ret_val;
+ }
+ }
+
+ if (hw->autoneg) {
+ /* Setup autoneg and flow control advertisement
+ * and perform autonegotiation */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /* PHY will be set to 10H, 10F, 100H,or 100F
+ * depending on value from forced_speed_duplex. */
+ e_dbg("Forcing speed and duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ e_dbg("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /* Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ for (i = 0; i < 10; i++) {
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ /* Config the MAC and PHY after link is up */
+ ret_val = e1000_copper_link_postconfig(hw);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("Valid link established!!!\n");
+ return E1000_SUCCESS;
+ }
+ udelay(10);
+ }
+
+ e_dbg("Unable to establish link!!!\n");
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_setup_autoneg - phy settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures PHY autoneg and flow control advertisement settings
+ */
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg;
+
+ e_dbg("e1000_phy_setup_autoneg");
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ else if (hw->phy_type == e1000_phy_8201)
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ /* Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /* First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~REG4_SPEED_MASK;
+ mii_1000t_ctrl_reg &= ~REG9_SPEED_MASK;
+
+ e_dbg("autoneg_advertised %x\n", hw->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_HALF) {
+ e_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_10_FULL) {
+ e_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_HALF) {
+ e_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_100_FULL) {
+ e_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (hw->autoneg_advertised & ADVERTISE_1000_HALF) {
+ e_dbg
+ ("Advertise 1000mb Half duplex requested, request denied!\n");
+ }
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (hw->autoneg_advertised & ADVERTISE_1000_FULL) {
+ e_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /* Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc) {
+ case E1000_FC_NONE: /* 0 */
+ /* Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_RX_PAUSE: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ */
+ /* Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ *hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case E1000_FC_TX_PAUSE: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case E1000_FC_FULL: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (hw->phy_type == e1000_phy_8201) {
+ mii_1000t_ctrl_reg = 0;
+ } else {
+ ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_force_speed_duplex - force link settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Force PHY speed and duplex settings to hw->forced_speed_duplex
+ */
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 mii_ctrl_reg;
+ u16 mii_status_reg;
+ u16 phy_data;
+ u16 i;
+
+ e_dbg("e1000_phy_force_speed_duplex");
+
+ /* Turn off Flow control if we are forcing speed and duplex. */
+ hw->fc = E1000_FC_NONE;
+
+ e_dbg("hw->fc = %d\n", hw->fc);
+
+ /* Read the Device Control Register. */
+ ctrl = er32(CTRL);
+
+ /* Set the bits to Force Speed and Duplex in the Device Ctrl Reg. */
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(DEVICE_SPEED_MASK);
+
+ /* Clear the Auto Speed Detect Enable bit. */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Read the MII Control Register. */
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* We need to disable autoneg in order to force link and duplex. */
+
+ mii_ctrl_reg &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Are we forcing Full or Half Duplex? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_10_full) {
+ /* We want to force full duplex so we SET the full duplex bits in the
+ * Device and MII Control Registers.
+ */
+ ctrl |= E1000_CTRL_FD;
+ mii_ctrl_reg |= MII_CR_FULL_DUPLEX;
+ e_dbg("Full Duplex\n");
+ } else {
+ /* We want to force half duplex so we CLEAR the full duplex bits in
+ * the Device and MII Control Registers.
+ */
+ ctrl &= ~E1000_CTRL_FD;
+ mii_ctrl_reg &= ~MII_CR_FULL_DUPLEX;
+ e_dbg("Half Duplex\n");
+ }
+
+ /* Are we forcing 100Mbps??? */
+ if (hw->forced_speed_duplex == e1000_100_full ||
+ hw->forced_speed_duplex == e1000_100_half) {
+ /* Set the 100Mb bit and turn off the 1000Mb and 10Mb bits. */
+ ctrl |= E1000_CTRL_SPD_100;
+ mii_ctrl_reg |= MII_CR_SPEED_100;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ e_dbg("Forcing 100mb ");
+ } else {
+ /* Set the 10Mb bit and turn off the 1000Mb and 100Mb bits. */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ mii_ctrl_reg |= MII_CR_SPEED_10;
+ mii_ctrl_reg &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ e_dbg("Forcing 10mb ");
+ }
+
+ e1000_config_collision_dist(hw);
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+
+ if (hw->phy_type == e1000_phy_m88) {
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed are duplex are forced.
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("M88E1000 PSCR: %x\n", phy_data);
+
+ /* Need to reset the PHY or these changes will be ignored */
+ mii_ctrl_reg |= MII_CR_RESET;
+
+ /* Disable MDI-X support for 10/100 */
+ } else {
+ /* Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed or duplex are forced.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Write back the modified PHY MII control register. */
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, mii_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ /* The wait_autoneg_complete flag may be a little misleading here.
+ * Since we are forcing speed and duplex, Auto-Neg is not enabled.
+ * But we do want to delay for a period while forcing only so we
+ * don't generate false No Link messages. So we will wait here
+ * only if the user has set wait_autoneg_complete to 1, which is
+ * the default.
+ */
+ if (hw->wait_autoneg_complete) {
+ /* We will wait for autoneg to complete. */
+ e_dbg("Waiting for forced speed/duplex link.\n");
+ mii_status_reg = 0;
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ }
+ if ((i == 0) && (hw->phy_type == e1000_phy_m88)) {
+ /* We didn't get link. Reset the DSP and wait again for link. */
+ ret_val = e1000_phy_reset_dsp(hw);
+ if (ret_val) {
+ e_dbg("Error Resetting PHY DSP\n");
+ return ret_val;
+ }
+ }
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ msleep(100);
+ /* Read the MII Status Register and wait for Auto-Neg Complete bit
+ * to be set.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* Because we reset the PHY above, we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock. This value
+ * defaults back to a 2.5MHz clock when the PHY is reset.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* In addition, because of the s/w reset above, we need to enable CRS on
+ * TX. This must be set for both full and half duplex operation.
+ */
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac_type == e1000_82544 || hw->mac_type == e1000_82543)
+ && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ret_val = e1000_polarity_reversal_workaround(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_collision_dist - set collision distance register
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets the collision distance in the Transmit Control register.
+ * Link should have been established previously. Reads the speed and duplex
+ * information from the Device Status register.
+ */
+void e1000_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl, coll_dist;
+
+ e_dbg("e1000_config_collision_dist");
+
+ if (hw->mac_type < e1000_82543)
+ coll_dist = E1000_COLLISION_DISTANCE_82542;
+ else
+ coll_dist = E1000_COLLISION_DISTANCE;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= coll_dist << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_config_mac_to_phy - sync phy and mac settings
+ * @hw: Struct containing variables accessed by shared code
+ * @mii_reg: data to write to the MII control register
+ *
+ * Sets MAC speed and duplex settings to reflect the those in the PHY
+ * The contents of the PHY register containing the needed information need to
+ * be passed in.
+ */
+static s32 e1000_config_mac_to_phy(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_config_mac_to_phy");
+
+ /* 82544 or newer MAC, Auto Speed Detection takes care of
+ * MAC speed/duplex configuration.*/
+ if ((hw->mac_type >= e1000_82544) && (hw->mac_type != e1000_ce4100))
+ return E1000_SUCCESS;
+
+ /* Read the Device Control Register and set the bits to Force Speed
+ * and Duplex.
+ */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~(E1000_CTRL_SPD_SEL | E1000_CTRL_ILOS);
+
+ switch (hw->phy_type) {
+ case e1000_phy_8201:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & RTL_PHY_CTRL_FD)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ if (phy_data & RTL_PHY_CTRL_SPD_100)
+ ctrl |= E1000_CTRL_SPD_100;
+ else
+ ctrl |= E1000_CTRL_SPD_10;
+
+ e1000_config_collision_dist(hw);
+ break;
+ default:
+ /* Set up duplex in the Device Control and Transmit Control
+ * registers depending on negotiated values.
+ */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & M88E1000_PSSR_DPLX)
+ ctrl |= E1000_CTRL_FD;
+ else
+ ctrl &= ~E1000_CTRL_FD;
+
+ e1000_config_collision_dist(hw);
+
+ /* Set up speed in the Device Control register depending on
+ * negotiated values.
+ */
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS)
+ ctrl |= E1000_CTRL_SPD_1000;
+ else if ((phy_data & M88E1000_PSSR_SPEED) ==
+ M88E1000_PSSR_100MBS)
+ ctrl |= E1000_CTRL_SPD_100;
+ }
+
+ /* Write the configured values back to the Device Control Reg. */
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_force_mac_fc - force flow control settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Forces the MAC's flow control settings.
+ * Sets the TFCE and RFCE bits in the device control register to reflect
+ * the adapter settings. TFCE and RFCE need to be explicitly set by
+ * software when a Copper PHY is used because autonegotiation is managed
+ * by the PHY rather than the MAC. Software must also configure these
+ * bits when link is forced on a fiber connection.
+ */
+s32 e1000_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ e_dbg("e1000_force_mac_fc");
+
+ /* Get the current configuration of the Device Control Register */
+ ctrl = er32(CTRL);
+
+ /* Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+
+ switch (hw->fc) {
+ case E1000_FC_NONE:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case E1000_FC_RX_PAUSE:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case E1000_FC_TX_PAUSE:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case E1000_FC_FULL:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ /* Disable TX Flow Control for 82542 (rev 2.0) */
+ if (hw->mac_type == e1000_82542_rev2_0)
+ ctrl &= (~E1000_CTRL_TFCE);
+
+ ew32(CTRL, ctrl);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_fc_after_link_up - configure flow control after autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Configures flow control settings after link is established
+ * Should be called immediately after a valid link has been established.
+ * Forces MAC flow control settings if link was forced. When in MII/GMII mode
+ * and autonegotiation is enabled, the MAC flow control settings will be set
+ * based on the flow control negotiated by the PHY. In TBI mode, the TFCE
+ * and RFCE bits will be automatically set to the negotiated flow control mode.
+ */
+static s32 e1000_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 mii_nway_adv_reg;
+ u16 mii_nway_lp_ability_reg;
+ u16 speed;
+ u16 duplex;
+
+ e_dbg("e1000_config_fc_after_link_up");
+
+ /* Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (((hw->media_type == e1000_media_type_fiber) && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_internal_serdes)
+ && (hw->autoneg_failed))
+ || ((hw->media_type == e1000_media_type_copper)
+ && (!hw->autoneg))) {
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ e_dbg("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->autoneg) {
+ /* Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_AUTONEG_COMPLETE) {
+ /* The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement Register
+ * (Address 4) and the Auto_Negotiation Base Page Ability
+ * Register (Address 5) to determine how flow control was
+ * negotiated.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /* Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | E1000_FC_NONE
+ * 0 | 1 | 0 | DC | E1000_FC_NONE
+ * 0 | 1 | 1 | 0 | E1000_FC_NONE
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ * 1 | 0 | 0 | DC | E1000_FC_NONE
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ * 1 | 1 | 0 | 0 | E1000_FC_NONE
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ /* Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_FC_FULL
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /* Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->original_fc == E1000_FC_FULL) {
+ hw->fc = E1000_FC_FULL;
+ e_dbg("Flow Control = FULL.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ e_dbg
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ }
+ /* For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | E1000_FC_TX_PAUSE
+ *
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_TX_PAUSE;
+ e_dbg
+ ("Flow Control = TX PAUSE frames only.\n");
+ }
+ /* For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | E1000_FC_RX_PAUSE
+ *
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR))
+ {
+ hw->fc = E1000_FC_RX_PAUSE;
+ e_dbg
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+ /* Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->original_fc == E1000_FC_NONE ||
+ hw->original_fc == E1000_FC_TX_PAUSE) ||
+ hw->fc_strict_ieee) {
+ hw->fc = E1000_FC_NONE;
+ e_dbg("Flow Control = NONE.\n");
+ } else {
+ hw->fc = E1000_FC_RX_PAUSE;
+ e_dbg
+ ("Flow Control = RX PAUSE frames only.\n");
+ }
+
+ /* Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ e_dbg
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc = E1000_FC_NONE;
+
+ /* Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000_force_mac_fc(hw);
+ if (ret_val) {
+ e_dbg
+ ("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ } else {
+ e_dbg
+ ("Copper PHY and Auto Neg has not completed.\n");
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_for_serdes_link_generic - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ */
+static s32 e1000_check_for_serdes_link_generic(struct e1000_hw *hw)
+{
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val = E1000_SUCCESS;
+
+ e_dbg("e1000_check_for_serdes_link_generic");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), and our link partner is not trying to
+ * auto-negotiate with us (we are receiving idles or data),
+ * we need to force link up. We also need to give auto-negotiation
+ * time to complete.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+ if (hw->autoneg_failed == 0) {
+ hw->autoneg_failed = 1;
+ goto out;
+ }
+ e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (hw->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error configuring flow control\n");
+ goto out;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, hw->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ hw->serdes_has_link = true;
+ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ e_dbg("SERDES: Link up - forced.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ e_dbg("SERDES: Link down - force failed.\n");
+ }
+ }
+
+ if (E1000_TXCW_ANE & er32(TXCW)) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ hw->serdes_has_link = true;
+ e_dbg("SERDES: Link up - autoneg "
+ "completed successfully.\n");
+ } else {
+ hw->serdes_has_link = false;
+ e_dbg("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ e_dbg("SERDES: Link down - no sync.\n");
+ }
+ } else {
+ hw->serdes_has_link = false;
+ e_dbg("SERDES: Link down - autoneg failed\n");
+ }
+ }
+
+ out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_link
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks to see if the link status of the hardware has changed.
+ * Called by any function that needs to check the link status of the adapter.
+ */
+s32 e1000_check_for_link(struct e1000_hw *hw)
+{
+ u32 rxcw = 0;
+ u32 ctrl;
+ u32 status;
+ u32 rctl;
+ u32 icr;
+ u32 signal = 0;
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_check_for_link");
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+
+ /* On adapters with a MAC newer than 82544, SW Definable pin 1 will be
+ * set when the optics detect a signal. On older adapters, it will be
+ * cleared when there is a signal. This applies to fiber media only.
+ */
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes)) {
+ rxcw = er32(RXCW);
+
+ if (hw->media_type == e1000_media_type_fiber) {
+ signal =
+ (hw->mac_type >
+ e1000_82544) ? E1000_CTRL_SWDPIN1 : 0;
+ if (status & E1000_STATUS_LU)
+ hw->get_link_status = false;
+ }
+ }
+
+ /* If we have a copper PHY then we only want to go out to the PHY
+ * registers to see if Auto-Neg has completed and/or if our link
+ * status has changed. The get_link_status flag will be set if we
+ * receive a Link Status Change interrupt or we have Rx Sequence
+ * Errors.
+ */
+ if ((hw->media_type == e1000_media_type_copper) && hw->get_link_status) {
+ /* First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ * Read the register twice since the link bit is sticky.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (phy_data & MII_SR_LINK_STATUS) {
+ hw->get_link_status = false;
+ /* Check if there was DownShift, must be checked immediately after
+ * link-up */
+ e1000_check_downshift(hw);
+
+ /* If we are on 82544 or 82543 silicon and speed/duplex
+ * are forced to 10H or 10F, then we will implement the polarity
+ * reversal workaround. We disable interrupts first, and upon
+ * returning, place the devices interrupt state to its previous
+ * value except for the link status change interrupt which will
+ * happen due to the execution of this workaround.
+ */
+
+ if ((hw->mac_type == e1000_82544
+ || hw->mac_type == e1000_82543) && (!hw->autoneg)
+ && (hw->forced_speed_duplex == e1000_10_full
+ || hw->forced_speed_duplex == e1000_10_half)) {
+ ew32(IMC, 0xffffffff);
+ ret_val =
+ e1000_polarity_reversal_workaround(hw);
+ icr = er32(ICR);
+ ew32(ICS, (icr & ~E1000_ICS_LSC));
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+
+ } else {
+ /* No link detected */
+ e1000_config_dsp_after_link_change(hw, false);
+ return 0;
+ }
+
+ /* If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!hw->autoneg)
+ return -E1000_ERR_CONFIG;
+
+ /* optimize the dsp settings for the igp phy */
+ e1000_config_dsp_after_link_change(hw, true);
+
+ /* We have a M88E1000 PHY and Auto-Neg is enabled. If we
+ * have Si on board that is 82544 or newer, Auto
+ * Speed Detection takes care of MAC speed/duplex
+ * configuration. So we only need to configure Collision
+ * Distance in the MAC. Otherwise, we need to force
+ * speed/duplex on the MAC to the current PHY speed/duplex
+ * settings.
+ */
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_ce4100))
+ e1000_config_collision_dist(hw);
+ else {
+ ret_val = e1000_config_mac_to_phy(hw);
+ if (ret_val) {
+ e_dbg
+ ("Error configuring MAC to PHY settings\n");
+ return ret_val;
+ }
+ }
+
+ /* Configure Flow Control now that Auto-Neg has completed. First, we
+ * need to restore the desired flow control settings because we may
+ * have had to re-autoneg with a different link partner.
+ */
+ ret_val = e1000_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error configuring flow control\n");
+ return ret_val;
+ }
+
+ /* At this point we know that we are on copper and we have
+ * auto-negotiated link. These are conditions for checking the link
+ * partner capability register. We use the link speed to determine if
+ * TBI compatibility needs to be turned on or off. If the link is not
+ * at gigabit speed, then TBI compatibility is not needed. If we are
+ * at gigabit speed, we turn on TBI compatibility.
+ */
+ if (hw->tbi_compatibility_en) {
+ u16 speed, duplex;
+ ret_val =
+ e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ e_dbg
+ ("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+ if (speed != SPEED_1000) {
+ /* If link speed is not set to gigabit speed, we do not need
+ * to enable TBI compatibility.
+ */
+ if (hw->tbi_compatibility_on) {
+ /* If we previously were in the mode, turn it off. */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ hw->tbi_compatibility_on = false;
+ }
+ } else {
+ /* If TBI compatibility is was previously off, turn it on. For
+ * compatibility with a TBI link partner, we will store bad
+ * packets. Some frames have an additional byte on the end and
+ * will look like CRC errors to to the hardware.
+ */
+ if (!hw->tbi_compatibility_on) {
+ hw->tbi_compatibility_on = true;
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_SBP;
+ ew32(RCTL, rctl);
+ }
+ }
+ }
+ }
+
+ if ((hw->media_type == e1000_media_type_fiber) ||
+ (hw->media_type == e1000_media_type_internal_serdes))
+ e1000_check_for_serdes_link_generic(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_speed_and_duplex
+ * @hw: Struct containing variables accessed by shared code
+ * @speed: Speed of the connection
+ * @duplex: Duplex setting of the connection
+
+ * Detects the current speed and duplex settings of the hardware.
+ */
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_get_speed_and_duplex");
+
+ if (hw->mac_type >= e1000_82543) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ e_dbg("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ e_dbg("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ e_dbg("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ e_dbg("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ e_dbg(" Half Duplex\n");
+ }
+ } else {
+ e_dbg("1000 Mbs, Full Duplex\n");
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+ }
+
+ /* IGP01 PHY may advertise full duplex operation after speed downgrade even
+ * if it is operating at half duplex. Here we set the duplex settings to
+ * match the duplex in the link partner's capabilities.
+ */
+ if (hw->phy_type == e1000_phy_igp && hw->speed_downgraded) {
+ ret_val = e1000_read_phy_reg(hw, PHY_AUTONEG_EXP, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(phy_data & NWAY_ER_LP_NWAY_CAPS))
+ *duplex = HALF_DUPLEX;
+ else {
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_LP_ABILITY, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if ((*speed == SPEED_100
+ && !(phy_data & NWAY_LPAR_100TX_FD_CAPS))
+ || (*speed == SPEED_10
+ && !(phy_data & NWAY_LPAR_10T_FD_CAPS)))
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_wait_autoneg
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Blocks until autoneg completes or times out (~4.5 seconds)
+ */
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 i;
+ u16 phy_data;
+
+ e_dbg("e1000_wait_autoneg");
+ e_dbg("Waiting for Auto-Neg to complete.\n");
+
+ /* We will wait for autoneg to complete or 4.5 seconds to expire. */
+ for (i = PHY_AUTO_NEG_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Auto-Neg
+ * Complete bit to be set.
+ */
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+ if (phy_data & MII_SR_AUTONEG_COMPLETE) {
+ return E1000_SUCCESS;
+ }
+ msleep(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_raise_mdi_clk - Raises the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_raise_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Raise the clock input to the Management Data Clock (by setting the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl | E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_lower_mdi_clk - Lowers the Management Data Clock
+ * @hw: Struct containing variables accessed by shared code
+ * @ctrl: Device control register's current value
+ */
+static void e1000_lower_mdi_clk(struct e1000_hw *hw, u32 *ctrl)
+{
+ /* Lower the clock input to the Management Data Clock (by clearing the MDC
+ * bit), and then delay 10 microseconds.
+ */
+ ew32(CTRL, (*ctrl & ~E1000_CTRL_MDC));
+ E1000_WRITE_FLUSH();
+ udelay(10);
+}
+
+/**
+ * e1000_shift_out_mdi_bits - Shifts data bits out to the PHY
+ * @hw: Struct containing variables accessed by shared code
+ * @data: Data to send out to the PHY
+ * @count: Number of bits to shift out
+ *
+ * Bits are shifted out in MSB to LSB order.
+ */
+static void e1000_shift_out_mdi_bits(struct e1000_hw *hw, u32 data, u16 count)
+{
+ u32 ctrl;
+ u32 mask;
+
+ /* We need to shift "count" number of bits out to the PHY. So, the value
+ * in the "data" parameter will be shifted out to the PHY one bit at a
+ * time. In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01;
+ mask <<= (count - 1);
+
+ ctrl = er32(CTRL);
+
+ /* Set MDIO_DIR and MDC_DIR direction bits to be used as output pins. */
+ ctrl |= (E1000_CTRL_MDIO_DIR | E1000_CTRL_MDC_DIR);
+
+ while (mask) {
+ /* A "1" is shifted out to the PHY by setting the MDIO bit to "1" and
+ * then raising and lowering the Management Data Clock. A "0" is
+ * shifted out to the PHY by setting the MDIO bit to "0" and then
+ * raising and lowering the clock.
+ */
+ if (data & mask)
+ ctrl |= E1000_CTRL_MDIO;
+ else
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ udelay(10);
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ mask = mask >> 1;
+ }
+}
+
+/**
+ * e1000_shift_in_mdi_bits - Shifts data bits in from the PHY
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Bits are shifted in in MSB to LSB order.
+ */
+static u16 e1000_shift_in_mdi_bits(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u16 data = 0;
+ u8 i;
+
+ /* In order to read a register from the PHY, we need to shift in a total
+ * of 18 bits from the PHY. The first two bit (turnaround) times are used
+ * to avoid contention on the MDIO pin when a read operation is performed.
+ * These two bits are ignored by us and thrown away. Bits are "shifted in"
+ * by raising the input to the Management Data Clock (setting the MDC bit),
+ * and then reading the value of the MDIO bit.
+ */
+ ctrl = er32(CTRL);
+
+ /* Clear MDIO_DIR (SWDPIO1) to indicate this bit is to be used as input. */
+ ctrl &= ~E1000_CTRL_MDIO_DIR;
+ ctrl &= ~E1000_CTRL_MDIO;
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ /* Raise and Lower the clock before reading in the data. This accounts for
+ * the turnaround bits. The first clock occurred when we clocked out the
+ * last bit of the Register Address.
+ */
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ for (data = 0, i = 0; i < 16; i++) {
+ data = data << 1;
+ e1000_raise_mdi_clk(hw, &ctrl);
+ ctrl = er32(CTRL);
+ /* Check to see if we shifted in a "1". */
+ if (ctrl & E1000_CTRL_MDIO)
+ data |= 1;
+ e1000_lower_mdi_clk(hw, &ctrl);
+ }
+
+ e1000_raise_mdi_clk(hw, &ctrl);
+ e1000_lower_mdi_clk(hw, &ctrl);
+
+ return data;
+}
+
+
+/**
+ * e1000_read_phy_reg - read a phy register
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to read
+ *
+ * Reads the value from a PHY register, if the value is on a specific non zero
+ * page, sets the page first.
+ */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 *phy_data)
+{
+ u32 ret_val;
+
+ e_dbg("e1000_read_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_read_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_read_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 *phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
+
+ e_dbg("e1000_read_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ e_dbg("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, and register address in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ if (hw->mac_type == e1000_ce4100) {
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (INTEL_CE_GBE_MDIC_OP_READ) |
+ (INTEL_CE_GBE_MDIC_GO));
+
+ writel(mdic, E1000_MDIO_CMD);
+
+ /* Poll the ready bit to see if the MDI read
+ * completed
+ */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = readl(E1000_MDIO_CMD);
+ if (!(mdic & INTEL_CE_GBE_MDIC_GO))
+ break;
+ }
+
+ if (mdic & INTEL_CE_GBE_MDIC_GO) {
+ e_dbg("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+
+ mdic = readl(E1000_MDIO_STS);
+ if (mdic & INTEL_CE_GBE_MDIC_READ_ERROR) {
+ e_dbg("MDI Read Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16) mdic;
+ } else {
+ mdic = ((reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read
+ * completed
+ */
+ for (i = 0; i < 64; i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ e_dbg("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ e_dbg("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *phy_data = (u16) mdic;
+ }
+ } else {
+ /* We must first send a preamble through the MDIO pin to signal the
+ * beginning of an MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the next few fields that are required for a read
+ * operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine five different times. The format of
+ * a MII read instruction consists of a shift out of 14 bits and is
+ * defined as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr>
+ * followed by a shift in of 18 bits. This first two bits shifted in
+ * are TurnAround bits used to avoid contention on the MDIO pin when a
+ * READ operation is performed. These two bits are thrown away
+ * followed by a shift in of 16 bits which contains the desired data.
+ */
+ mdic = ((reg_addr) | (phy_addr << 5) |
+ (PHY_OP_READ << 10) | (PHY_SOF << 12));
+
+ e1000_shift_out_mdi_bits(hw, mdic, 14);
+
+ /* Now that we've shifted out the read command to the MII, we need to
+ * "shift in" the 16-bit value (18 total bits) of the requested PHY
+ * register address.
+ */
+ *phy_data = e1000_shift_in_mdi_bits(hw);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_phy_reg - write a phy register
+ *
+ * @hw: Struct containing variables accessed by shared code
+ * @reg_addr: address of the PHY register to write
+ * @data: data to write to the PHY
+
+ * Writes a value to a PHY register
+ */
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 phy_data)
+{
+ u32 ret_val;
+
+ e_dbg("e1000_write_phy_reg");
+
+ if ((hw->phy_type == e1000_phy_igp) &&
+ (reg_addr > MAX_PHY_MULTI_PAGE_REG)) {
+ ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT,
+ (u16) reg_addr);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg_ex(hw, MAX_PHY_REG_ADDRESS & reg_addr,
+ phy_data);
+
+ return ret_val;
+}
+
+static s32 e1000_write_phy_reg_ex(struct e1000_hw *hw, u32 reg_addr,
+ u16 phy_data)
+{
+ u32 i;
+ u32 mdic = 0;
+ const u32 phy_addr = (hw->mac_type == e1000_ce4100) ? hw->phy_addr : 1;
+
+ e_dbg("e1000_write_phy_reg_ex");
+
+ if (reg_addr > MAX_PHY_REG_ADDRESS) {
+ e_dbg("PHY Address %d is out of range\n", reg_addr);
+ return -E1000_ERR_PARAM;
+ }
+
+ if (hw->mac_type > e1000_82543) {
+ /* Set up Op-code, Phy Address, register address, and data
+ * intended for the PHY register in the MDI Control register.
+ * The MAC will take care of interfacing with the PHY to send
+ * the desired data.
+ */
+ if (hw->mac_type == e1000_ce4100) {
+ mdic = (((u32) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (INTEL_CE_GBE_MDIC_OP_WRITE) |
+ (INTEL_CE_GBE_MDIC_GO));
+
+ writel(mdic, E1000_MDIO_CMD);
+
+ /* Poll the ready bit to see if the MDI read
+ * completed
+ */
+ for (i = 0; i < 640; i++) {
+ udelay(5);
+ mdic = readl(E1000_MDIO_CMD);
+ if (!(mdic & INTEL_CE_GBE_MDIC_GO))
+ break;
+ }
+ if (mdic & INTEL_CE_GBE_MDIC_GO) {
+ e_dbg("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ } else {
+ mdic = (((u32) phy_data) |
+ (reg_addr << E1000_MDIC_REG_SHIFT) |
+ (phy_addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /* Poll the ready bit to see if the MDI read
+ * completed
+ */
+ for (i = 0; i < 641; i++) {
+ udelay(5);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ e_dbg("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ }
+ } else {
+ /* We'll need to use the SW defined pins to shift the write command
+ * out to the PHY. We first send a preamble to the PHY to signal the
+ * beginning of the MII instruction. This is done by sending 32
+ * consecutive "1" bits.
+ */
+ e1000_shift_out_mdi_bits(hw, PHY_PREAMBLE, PHY_PREAMBLE_SIZE);
+
+ /* Now combine the remaining required fields that will indicate a
+ * write operation. We use this method instead of calling the
+ * e1000_shift_out_mdi_bits routine for each field in the command. The
+ * format of a MII write instruction is as follows:
+ * <Preamble><SOF><Op Code><Phy Addr><Reg Addr><Turnaround><Data>.
+ */
+ mdic = ((PHY_TURNAROUND) | (reg_addr << 2) | (phy_addr << 7) |
+ (PHY_OP_WRITE << 12) | (PHY_SOF << 14));
+ mdic <<= 16;
+ mdic |= (u32) phy_data;
+
+ e1000_shift_out_mdi_bits(hw, mdic, 32);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_hw_reset - reset the phy, hardware style
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Returns the PHY to the power-on reset state
+ */
+s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ u32 led_ctrl;
+
+ e_dbg("e1000_phy_hw_reset");
+
+ e_dbg("Resetting Phy...\n");
+
+ if (hw->mac_type > e1000_82543) {
+ /* Read the device control register and assert the E1000_CTRL_PHY_RST
+ * bit. Then, take it out of reset.
+ * For e1000 hardware, we delay for 10ms between the assert
+ * and deassert.
+ */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ E1000_WRITE_FLUSH();
+
+ msleep(10);
+
+ ew32(CTRL, ctrl);
+ E1000_WRITE_FLUSH();
+
+ } else {
+ /* Read the Extended Device Control Register, assert the PHY_RESET_DIR
+ * bit to put the PHY into reset. Then, take it out of reset.
+ */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DIR;
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ msleep(10);
+ ctrl_ext |= E1000_CTRL_EXT_SDP4_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ E1000_WRITE_FLUSH();
+ }
+ udelay(150);
+
+ if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) {
+ /* Configure activity LED after PHY reset */
+ led_ctrl = er32(LEDCTL);
+ led_ctrl &= IGP_ACTIVITY_LED_MASK;
+ led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE);
+ ew32(LEDCTL, led_ctrl);
+ }
+
+ /* Wait for FW to finish PHY configuration. */
+ return e1000_get_phy_cfg_done(hw);
+}
+
+/**
+ * e1000_phy_reset - reset the phy to commit settings
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY
+ * Sets bit 15 of the MII Control register
+ */
+s32 e1000_phy_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_phy_reset");
+
+ switch (hw->phy_type) {
+ case e1000_phy_igp:
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= MII_CR_RESET;
+ ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+ break;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ e1000_phy_init_script(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_detect_gig_phy - check the phy type
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Probes the expected PHY address for known PHY IDs
+ */
+static s32 e1000_detect_gig_phy(struct e1000_hw *hw)
+{
+ s32 phy_init_status, ret_val;
+ u16 phy_id_high, phy_id_low;
+ bool match = false;
+
+ e_dbg("e1000_detect_gig_phy");
+
+ if (hw->phy_id != 0)
+ return E1000_SUCCESS;
+
+ /* Read the PHY ID Registers to identify which PHY is onboard. */
+ ret_val = e1000_read_phy_reg(hw, PHY_ID1, &phy_id_high);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id = (u32) (phy_id_high << 16);
+ udelay(20);
+ ret_val = e1000_read_phy_reg(hw, PHY_ID2, &phy_id_low);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_id |= (u32) (phy_id_low & PHY_REVISION_MASK);
+ hw->phy_revision = (u32) phy_id_low & ~PHY_REVISION_MASK;
+
+ switch (hw->mac_type) {
+ case e1000_82543:
+ if (hw->phy_id == M88E1000_E_PHY_ID)
+ match = true;
+ break;
+ case e1000_82544:
+ if (hw->phy_id == M88E1000_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (hw->phy_id == M88E1011_I_PHY_ID)
+ match = true;
+ break;
+ case e1000_ce4100:
+ if ((hw->phy_id == RTL8211B_PHY_ID) ||
+ (hw->phy_id == RTL8201N_PHY_ID) ||
+ (hw->phy_id == M88E1118_E_PHY_ID))
+ match = true;
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (hw->phy_id == IGP01E1000_I_PHY_ID)
+ match = true;
+ break;
+ default:
+ e_dbg("Invalid MAC type %d\n", hw->mac_type);
+ return -E1000_ERR_CONFIG;
+ }
+ phy_init_status = e1000_set_phy_type(hw);
+
+ if ((match) && (phy_init_status == E1000_SUCCESS)) {
+ e_dbg("PHY ID 0x%X detected\n", hw->phy_id);
+ return E1000_SUCCESS;
+ }
+ e_dbg("Invalid PHY ID 0x%X\n", hw->phy_id);
+ return -E1000_ERR_PHY;
+}
+
+/**
+ * e1000_phy_reset_dsp - reset DSP
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Resets the PHY's DSP
+ */
+static s32 e1000_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ e_dbg("e1000_phy_reset_dsp");
+
+ do {
+ ret_val = e1000_write_phy_reg(hw, 29, 0x001d);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x00c1);
+ if (ret_val)
+ break;
+ ret_val = e1000_write_phy_reg(hw, 30, 0x0000);
+ if (ret_val)
+ break;
+ ret_val = E1000_SUCCESS;
+ } while (0);
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_igp_get_info - get igp specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for igp PHY only.
+ */
+static s32 e1000_phy_igp_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data, min_length, max_length, average;
+ e1000_rev_polarity polarity;
+
+ e_dbg("e1000_phy_igp_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ /* IGP01E1000 does not need to support it. */
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal;
+
+ /* IGP01E1000 always correct polarity reversal */
+ phy_info->polarity_correction = e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & IGP01E1000_PSSR_MDIX) >>
+ IGP01E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ /* Local/Remote Receiver Information are only valid at 1000 Mbps */
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ /* Get cable length */
+ ret_val = e1000_get_cable_length(hw, &min_length, &max_length);
+ if (ret_val)
+ return ret_val;
+
+ /* Translate to old method */
+ average = (max_length + min_length) / 2;
+
+ if (average <= e1000_igp_cable_length_50)
+ phy_info->cable_length = e1000_cable_length_50;
+ else if (average <= e1000_igp_cable_length_80)
+ phy_info->cable_length = e1000_cable_length_50_80;
+ else if (average <= e1000_igp_cable_length_110)
+ phy_info->cable_length = e1000_cable_length_80_110;
+ else if (average <= e1000_igp_cable_length_140)
+ phy_info->cable_length = e1000_cable_length_110_140;
+ else
+ phy_info->cable_length = e1000_cable_length_140;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_m88_get_info - get m88 specific registers
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers for m88 PHY only.
+ */
+static s32 e1000_phy_m88_get_info(struct e1000_hw *hw,
+ struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e1000_rev_polarity polarity;
+
+ e_dbg("e1000_phy_m88_get_info");
+
+ /* The downshift status is checked only once, after link is established,
+ * and it stored in the hw->speed_downgraded parameter. */
+ phy_info->downshift = (e1000_downshift) hw->speed_downgraded;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->extended_10bt_distance =
+ ((phy_data & M88E1000_PSCR_10BT_EXT_DIST_ENABLE) >>
+ M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT) ?
+ e1000_10bt_ext_dist_enable_lower :
+ e1000_10bt_ext_dist_enable_normal;
+
+ phy_info->polarity_correction =
+ ((phy_data & M88E1000_PSCR_POLARITY_REVERSAL) >>
+ M88E1000_PSCR_POLARITY_REVERSAL_SHIFT) ?
+ e1000_polarity_reversal_disabled : e1000_polarity_reversal_enabled;
+
+ /* Check polarity status */
+ ret_val = e1000_check_polarity(hw, &polarity);
+ if (ret_val)
+ return ret_val;
+ phy_info->cable_polarity = polarity;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->mdix_mode =
+ (e1000_auto_x_mode) ((phy_data & M88E1000_PSSR_MDIX) >>
+ M88E1000_PSSR_MDIX_SHIFT);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ /* Cable Length Estimation and Local/Remote Receiver Information
+ * are only valid at 1000 Mbps.
+ */
+ phy_info->cable_length =
+ (e1000_cable_length) ((phy_data &
+ M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT);
+
+ ret_val = e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_info->local_rx = ((phy_data & SR_1000T_LOCAL_RX_STATUS) >>
+ SR_1000T_LOCAL_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+ phy_info->remote_rx = ((phy_data & SR_1000T_REMOTE_RX_STATUS) >>
+ SR_1000T_REMOTE_RX_STATUS_SHIFT) ?
+ e1000_1000t_rx_status_ok : e1000_1000t_rx_status_not_ok;
+
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_phy_get_info - request phy info
+ * @hw: Struct containing variables accessed by shared code
+ * @phy_info: PHY information structure
+ *
+ * Get PHY information from various PHY registers
+ */
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_phy_get_info");
+
+ phy_info->cable_length = e1000_cable_length_undefined;
+ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_undefined;
+ phy_info->cable_polarity = e1000_rev_polarity_undefined;
+ phy_info->downshift = e1000_downshift_undefined;
+ phy_info->polarity_correction = e1000_polarity_reversal_undefined;
+ phy_info->mdix_mode = e1000_auto_x_mode_undefined;
+ phy_info->local_rx = e1000_1000t_rx_status_undefined;
+ phy_info->remote_rx = e1000_1000t_rx_status_undefined;
+
+ if (hw->media_type != e1000_media_type_copper) {
+ e_dbg("PHY info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy_data & MII_SR_LINK_STATUS) != MII_SR_LINK_STATUS) {
+ e_dbg("PHY info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ if (hw->phy_type == e1000_phy_igp)
+ return e1000_phy_igp_get_info(hw, phy_info);
+ else if ((hw->phy_type == e1000_phy_8211) ||
+ (hw->phy_type == e1000_phy_8201))
+ return E1000_SUCCESS;
+ else
+ return e1000_phy_m88_get_info(hw, phy_info);
+}
+
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw)
+{
+ e_dbg("e1000_validate_mdi_settings");
+
+ if (!hw->autoneg && (hw->mdix == 0 || hw->mdix == 3)) {
+ e_dbg("Invalid MDI setting detected\n");
+ hw->mdix = 1;
+ return -E1000_ERR_CONFIG;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_eeprom_params - initialize sw eeprom vars
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sets up eeprom variables in the hw struct. Must be called after mac_type
+ * is configured.
+ */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd = er32(EECD);
+ s32 ret_val = E1000_SUCCESS;
+ u16 eeprom_size;
+
+ e_dbg("e1000_init_eeprom_params");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->word_size = 64;
+ eeprom->opcode_bits = 3;
+ eeprom->address_bits = 6;
+ eeprom->delay_usec = 50;
+ break;
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_SIZE) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ break;
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (eecd & E1000_EECD_TYPE) {
+ eeprom->type = e1000_eeprom_spi;
+ eeprom->opcode_bits = 8;
+ eeprom->delay_usec = 1;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->page_size = 32;
+ eeprom->address_bits = 16;
+ } else {
+ eeprom->page_size = 8;
+ eeprom->address_bits = 8;
+ }
+ } else {
+ eeprom->type = e1000_eeprom_microwire;
+ eeprom->opcode_bits = 3;
+ eeprom->delay_usec = 50;
+ if (eecd & E1000_EECD_ADDR_BITS) {
+ eeprom->word_size = 256;
+ eeprom->address_bits = 8;
+ } else {
+ eeprom->word_size = 64;
+ eeprom->address_bits = 6;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (eeprom->type == e1000_eeprom_spi) {
+ /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to
+ * 32KB (incremented by powers of 2).
+ */
+ /* Set to default value for initial eeprom read. */
+ eeprom->word_size = 64;
+ ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size);
+ if (ret_val)
+ return ret_val;
+ eeprom_size =
+ (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT;
+ /* 256B eeprom size was not supported in earlier hardware, so we
+ * bump eeprom_size up one to ensure that "1" (which maps to 256B)
+ * is never the result used in the shifting logic below. */
+ if (eeprom_size)
+ eeprom_size++;
+
+ eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT);
+ }
+ return ret_val;
+}
+
+/**
+ * e1000_raise_ee_clk - Raises the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_raise_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait <delay> microseconds.
+ */
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_lower_ee_clk - Lowers the EEPROM's clock input.
+ * @hw: Struct containing variables accessed by shared code
+ * @eecd: EECD's current value
+ */
+static void e1000_lower_ee_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+}
+
+/**
+ * e1000_shift_out_ee_bits - Shift data bits out to the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ */
+static void e1000_shift_out_ee_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd = er32(EECD);
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~E1000_EECD_DO;
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_DO;
+ }
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(eeprom->delay_usec);
+
+ e1000_raise_ee_clk(hw, &eecd);
+ e1000_lower_ee_clk(hw, &eecd);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_ee_bits - Shift data bits in from the EEPROM
+ * @hw: Struct containing variables accessed by shared code
+ * @count: number of bits to shift in
+ */
+static u16 e1000_shift_in_ee_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 'count'
+ * bits in from the EEPROM. Bits are "shifted in" by raising the clock
+ * input to the EEPROM (setting the SK bit), and then reading the value of
+ * the "DO" bit. During this "shifting in" process the "DI" bit should
+ * always be clear.
+ */
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ e1000_raise_ee_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DI);
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_ee_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000_acquire_eeprom - Prepares EEPROM for access
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ */
+static s32 e1000_acquire_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd, i = 0;
+
+ e_dbg("e1000_acquire_eeprom");
+
+ eecd = er32(EECD);
+
+ /* Request EEPROM Access */
+ if (hw->mac_type > e1000_82544) {
+ eecd |= E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ eecd = er32(EECD);
+ while ((!(eecd & E1000_EECD_GNT)) &&
+ (i < E1000_EEPROM_GRANT_ATTEMPTS)) {
+ i++;
+ udelay(5);
+ eecd = er32(EECD);
+ }
+ if (!(eecd & E1000_EECD_GNT)) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ e_dbg("Could not acquire EEPROM grant\n");
+ return -E1000_ERR_EEPROM;
+ }
+ }
+
+ /* Setup EEPROM for Read/Write */
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ /* Clear SK and DI */
+ eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
+ ew32(EECD, eecd);
+
+ /* Set CS */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(1);
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_standby_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+
+ eecd = er32(EECD);
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock high */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Select EEPROM */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+
+ /* Clock low */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ } else if (eeprom->type == e1000_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(eeprom->delay_usec);
+ }
+}
+
+/**
+ * e1000_release_eeprom - drop chip select
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Terminates a command by inverting the EEPROM's chip select pin
+ */
+static void e1000_release_eeprom(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e_dbg("e1000_release_eeprom");
+
+ eecd = er32(EECD);
+
+ if (hw->eeprom.type == e1000_eeprom_spi) {
+ eecd |= E1000_EECD_CS; /* Pull CS high */
+ eecd &= ~E1000_EECD_SK; /* Lower SCK */
+
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+
+ udelay(hw->eeprom.delay_usec);
+ } else if (hw->eeprom.type == e1000_eeprom_microwire) {
+ /* cleanup eeprom */
+
+ /* CS on Microwire is active-high */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
+
+ ew32(EECD, eecd);
+
+ /* Rising edge of clock */
+ eecd |= E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+
+ /* Falling edge of clock */
+ eecd &= ~E1000_EECD_SK;
+ ew32(EECD, eecd);
+ E1000_WRITE_FLUSH();
+ udelay(hw->eeprom.delay_usec);
+ }
+
+ /* Stop requesting EEPROM access */
+ if (hw->mac_type > e1000_82544) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ }
+}
+
+/**
+ * e1000_spi_eeprom_ready - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static s32 e1000_spi_eeprom_ready(struct e1000_hw *hw)
+{
+ u16 retry_count = 0;
+ u8 spi_stat_reg;
+
+ e_dbg("e1000_spi_eeprom_ready");
+
+ /* Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ retry_count = 0;
+ do {
+ e1000_shift_out_ee_bits(hw, EEPROM_RDSR_OPCODE_SPI,
+ hw->eeprom.opcode_bits);
+ spi_stat_reg = (u8) e1000_shift_in_ee_bits(hw, 8);
+ if (!(spi_stat_reg & EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ retry_count += 5;
+
+ e1000_standby_eeprom(hw);
+ } while (retry_count < EEPROM_MAX_RETRY_SPI);
+
+ /* ATMEL SPI write time could vary from 0-20mSec on 3.3V devices (and
+ * only 0-5mSec on 5V devices)
+ */
+ if (retry_count >= EEPROM_MAX_RETRY_SPI) {
+ e_dbg("SPI EEPROM Status error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_eeprom - Reads a 16 bit word from the EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ * @words: number of words to read
+ */
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_read_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_read_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 i = 0;
+
+ e_dbg("e1000_read_eeprom");
+
+ if (hw->mac_type == e1000_ce4100) {
+ GBE_CONFIG_FLASH_READ(GBE_CONFIG_BASE_VIRT, offset, words,
+ data);
+ return E1000_SUCCESS;
+ }
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ e_dbg("\"words\" parameter out of bounds. Words = %d,"
+ "size = %d\n", offset, eeprom->word_size);
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* EEPROM's that don't use EERD to read require us to bit-bang the SPI
+ * directly. In this case, we need to acquire the EEPROM so that
+ * FW or other port software does not interrupt.
+ */
+ /* Prepare the EEPROM for bit-bang reading */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ /* Set up the SPI or Microwire EEPROM for bit-bang reading. We have
+ * acquired the EEPROM at this point, so any returns should release it */
+ if (eeprom->type == e1000_eeprom_spi) {
+ u16 word_in;
+ u8 read_opcode = EEPROM_READ_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw)) {
+ e1000_release_eeprom(hw);
+ return -E1000_ERR_EEPROM;
+ }
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ read_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw, read_opcode, eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset * 2),
+ eeprom->address_bits);
+
+ /* Read the data. The address of the eeprom internally increments with
+ * each byte (spi) being read, saving on the overhead of eeprom setup
+ * and tear-down. The address counter will roll over if reading beyond
+ * the size of the eeprom, thus allowing the entire memory to be read
+ * starting from any offset. */
+ for (i = 0; i < words; i++) {
+ word_in = e1000_shift_in_ee_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+ } else if (eeprom->type == e1000_eeprom_microwire) {
+ for (i = 0; i < words; i++) {
+ /* Send the READ command (opcode + addr) */
+ e1000_shift_out_ee_bits(hw,
+ EEPROM_READ_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+ e1000_shift_out_ee_bits(hw, (u16) (offset + i),
+ eeprom->address_bits);
+
+ /* Read the data. For microwire, each word requires the overhead
+ * of eeprom setup and tear-down. */
+ data[i] = e1000_shift_in_ee_bits(hw, 16);
+ e1000_standby_eeprom(hw);
+ }
+ }
+
+ /* End this read operation */
+ e1000_release_eeprom(hw);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_validate_eeprom_checksum - Verifies that the EEPROM has a valid checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ */
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ e_dbg("e1000_validate_eeprom_checksum");
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+
+ if (checksum == (u16) EEPROM_SUM)
+ return E1000_SUCCESS;
+ else {
+ e_dbg("EEPROM Checksum Invalid\n");
+ return -E1000_ERR_EEPROM;
+ }
+}
+
+/**
+ * e1000_update_eeprom_checksum - Calculates/writes the EEPROM checksum
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ */
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i, eeprom_data;
+
+ e_dbg("e1000_update_eeprom_checksum");
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++) {
+ if (e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ checksum += eeprom_data;
+ }
+ checksum = (u16) EEPROM_SUM - checksum;
+ if (e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) {
+ e_dbg("EEPROM Write Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom - write words to the different EEPROM types.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If e1000_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ */
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ s32 ret;
+ spin_lock(&e1000_eeprom_lock);
+ ret = e1000_do_write_eeprom(hw, offset, words, data);
+ spin_unlock(&e1000_eeprom_lock);
+ return ret;
+}
+
+static s32 e1000_do_write_eeprom(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ s32 status = 0;
+
+ e_dbg("e1000_write_eeprom");
+
+ if (hw->mac_type == e1000_ce4100) {
+ GBE_CONFIG_FLASH_WRITE(GBE_CONFIG_BASE_VIRT, offset, words,
+ data);
+ return E1000_SUCCESS;
+ }
+
+ /* If eeprom is not yet detected, do so now */
+ if (eeprom->word_size == 0)
+ e1000_init_eeprom_params(hw);
+
+ /* A check for invalid values: offset too large, too many words, and not
+ * enough words.
+ */
+ if ((offset >= eeprom->word_size)
+ || (words > eeprom->word_size - offset) || (words == 0)) {
+ e_dbg("\"words\" parameter out of bounds\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Prepare the EEPROM for writing */
+ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS)
+ return -E1000_ERR_EEPROM;
+
+ if (eeprom->type == e1000_eeprom_microwire) {
+ status = e1000_write_eeprom_microwire(hw, offset, words, data);
+ } else {
+ status = e1000_write_eeprom_spi(hw, offset, words, data);
+ msleep(10);
+ }
+
+ /* Done with writing */
+ e1000_release_eeprom(hw);
+
+ return status;
+}
+
+/**
+ * e1000_write_eeprom_spi - Writes a 16 bit word to a given offset in an SPI EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_spi(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u16 widx = 0;
+
+ e_dbg("e1000_write_eeprom_spi");
+
+ while (widx < words) {
+ u8 write_opcode = EEPROM_WRITE_OPCODE_SPI;
+
+ if (e1000_spi_eeprom_ready(hw))
+ return -E1000_ERR_EEPROM;
+
+ e1000_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WREN_OPCODE_SPI,
+ eeprom->opcode_bits);
+
+ e1000_standby_eeprom(hw);
+
+ /* Some SPI eeproms use the 8th address bit embedded in the opcode */
+ if ((eeprom->address_bits == 8) && (offset >= 128))
+ write_opcode |= EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, write_opcode, eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) ((offset + widx) * 2),
+ eeprom->address_bits);
+
+ /* Send the data */
+
+ /* Loop to allow for up to whole page write (32 bytes) of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_ee_bits(hw, word_out, 16);
+ widx++;
+
+ /* Some larger eeprom sizes are capable of a 32-byte PAGE WRITE
+ * operation, while the smaller eeproms are capable of an 8-byte
+ * PAGE WRITE operation. Break the inner loop to pass new address
+ */
+ if ((((offset + widx) * 2) % eeprom->page_size) == 0) {
+ e1000_standby_eeprom(hw);
+ break;
+ }
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_write_eeprom_microwire - Writes a 16 bit word to a given offset in a Microwire EEPROM.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: pointer to array of 8 bit words to be written to the EEPROM
+ */
+static s32 e1000_write_eeprom_microwire(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_eeprom_info *eeprom = &hw->eeprom;
+ u32 eecd;
+ u16 words_written = 0;
+ u16 i = 0;
+
+ e_dbg("e1000_write_eeprom_microwire");
+
+ /* Send the write enable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 11). It's less work to include
+ * the 11 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This puts the
+ * EEPROM into write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWEN_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ /* Prepare the EEPROM */
+ e1000_standby_eeprom(hw);
+
+ while (words_written < words) {
+ /* Send the Write command (3-bit opcode + addr) */
+ e1000_shift_out_ee_bits(hw, EEPROM_WRITE_OPCODE_MICROWIRE,
+ eeprom->opcode_bits);
+
+ e1000_shift_out_ee_bits(hw, (u16) (offset + words_written),
+ eeprom->address_bits);
+
+ /* Send the data */
+ e1000_shift_out_ee_bits(hw, data[words_written], 16);
+
+ /* Toggle the CS line. This in effect tells the EEPROM to execute
+ * the previous command.
+ */
+ e1000_standby_eeprom(hw);
+
+ /* Read DO repeatedly until it is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd = er32(EECD);
+ if (eecd & E1000_EECD_DO)
+ break;
+ udelay(50);
+ }
+ if (i == 200) {
+ e_dbg("EEPROM Write did not complete\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ /* Recover from write */
+ e1000_standby_eeprom(hw);
+
+ words_written++;
+ }
+
+ /* Send the write disable command to the EEPROM (3-bit opcode plus
+ * 6/8-bit dummy address beginning with 10). It's less work to include
+ * the 10 of the dummy address as part of the opcode than it is to shift
+ * it over the correct number of bits for the address. This takes the
+ * EEPROM out of write/erase mode.
+ */
+ e1000_shift_out_ee_bits(hw, EEPROM_EWDS_OPCODE_MICROWIRE,
+ (u16) (eeprom->opcode_bits + 2));
+
+ e1000_shift_out_ee_bits(hw, 0, (u16) (eeprom->address_bits - 2));
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_read_mac_addr - read the adapters MAC from eeprom
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Reads the adapter's MAC address from the EEPROM and inverts the LSB for the
+ * second function of dual function devices
+ */
+s32 e1000_read_mac_addr(struct e1000_hw *hw)
+{
+ u16 offset;
+ u16 eeprom_data, i;
+
+ e_dbg("e1000_read_mac_addr");
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i += 2) {
+ offset = i >> 1;
+ if (e1000_read_eeprom(hw, offset, 1, &eeprom_data) < 0) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+ hw->perm_mac_addr[i] = (u8) (eeprom_data & 0x00FF);
+ hw->perm_mac_addr[i + 1] = (u8) (eeprom_data >> 8);
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ hw->perm_mac_addr[5] ^= 0x01;
+ break;
+ }
+
+ for (i = 0; i < NODE_ADDRESS_SIZE; i++)
+ hw->mac_addr[i] = hw->perm_mac_addr[i];
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_rx_addrs - Initializes receive address filters.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ */
+static void e1000_init_rx_addrs(struct e1000_hw *hw)
+{
+ u32 i;
+ u32 rar_num;
+
+ e_dbg("e1000_init_rx_addrs");
+
+ /* Setup the receive address. */
+ e_dbg("Programming MAC Address into RAR[0]\n");
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ rar_num = E1000_RAR_ENTRIES;
+
+ /* Zero out the other 15 receive addresses. */
+ e_dbg("Clearing RAR[1-15]\n");
+ for (i = 1; i < rar_num; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_hash_mc_addr - Hashes an address to determine its location in the multicast table
+ * @hw: Struct containing variables accessed by shared code
+ * @mc_addr: the multicast address to hash
+ */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value = ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1:
+ /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value = ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2:
+ /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value = ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3:
+ /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
+}
+
+/**
+ * e1000_rar_set - Puts an ethernet address into a receive address register.
+ * @hw: Struct containing variables accessed by shared code
+ * @addr: Address to put into receive address register
+ * @index: Receive address register to write
+ */
+void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Disable Rx and flush all Rx frames before enabling RSS to avoid Rx
+ * unit hang.
+ *
+ * Description:
+ * If there are any Rx frames queued up or otherwise present in the HW
+ * before RSS is enabled, and then we enable RSS, the HW Rx unit will
+ * hang. To work around this issue, we have to disable receives and
+ * flush out all Rx frames before we enable RSS. To do so, we modify we
+ * redirect all Rx traffic to manageability and then reset the HW.
+ * This flushes away Rx frames, and (since the redirections to
+ * manageability persists across resets) keeps new ones from coming in
+ * while we work. Then, we clear the Address Valid AV bit for all MAC
+ * addresses and undo the re-direction to manageability.
+ * Now, frames are coming in again, but the MAC won't accept them, so
+ * far so good. We now proceed to initialize RSS (if necessary) and
+ * configure the Rx unit. Last, we re-enable the AV bits and continue
+ * on our merry way.
+ */
+ switch (hw->mac_type) {
+ default:
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+ break;
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+ E1000_WRITE_FLUSH();
+}
+
+/**
+ * e1000_write_vfta - Writes a value to the specified offset in the VLAN filter table.
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: Offset in VLAN filer table to write
+ * @value: Value to write into VLAN filter table
+ */
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ u32 temp;
+
+ if ((hw->mac_type == e1000_82544) && ((offset & 0x1) == 1)) {
+ temp = E1000_READ_REG_ARRAY(hw, VFTA, (offset - 1));
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, VFTA, (offset - 1), temp);
+ E1000_WRITE_FLUSH();
+ } else {
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+/**
+ * e1000_clear_vfta - Clears the VLAN filer table
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of the
+ * manageability unit */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value);
+ E1000_WRITE_FLUSH();
+ }
+}
+
+static s32 e1000_id_led_init(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 eeprom_data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ e_dbg("e1000_id_led_init");
+
+ if (hw->mac_type < e1000_82540) {
+ /* Nothing to do */
+ return E1000_SUCCESS;
+ }
+
+ ledctl = er32(LEDCTL);
+ hw->ledctl_default = ledctl;
+ hw->ledctl_mode1 = hw->ledctl_default;
+ hw->ledctl_mode2 = hw->ledctl_default;
+
+ if (e1000_read_eeprom(hw, EEPROM_ID_LED_SETTINGS, 1, &eeprom_data) < 0) {
+ e_dbg("EEPROM Read Error\n");
+ return -E1000_ERR_EEPROM;
+ }
+
+ if ((eeprom_data == ID_LED_RESERVED_0000) ||
+ (eeprom_data == ID_LED_RESERVED_FFFF)) {
+ eeprom_data = ID_LED_DEFAULT;
+ }
+
+ for (i = 0; i < 4; i++) {
+ temp = (eeprom_data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ hw->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ hw->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_setup_led
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Prepares SW controlable LED for use and saves the current state of the LED.
+ */
+s32 e1000_setup_led(struct e1000_hw *hw)
+{
+ u32 ledctl;
+ s32 ret_val = E1000_SUCCESS;
+
+ e_dbg("e1000_setup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No setup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn off PHY Smart Power Down (if enabled) */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ &hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ (u16) (hw->phy_spd_default &
+ ~IGP01E1000_GMII_SPD));
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ /* Save current LEDCTL settings */
+ hw->ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->media_type == e1000_media_type_copper)
+ ew32(LEDCTL, hw->ledctl_mode1);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_cleanup_led - Restores the saved state of the SW controlable LED.
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_cleanup_led(struct e1000_hw *hw)
+{
+ s32 ret_val = E1000_SUCCESS;
+
+ e_dbg("e1000_cleanup_led");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ /* No cleanup necessary */
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ /* Turn on PHY Smart Power Down (if previously enabled) */
+ ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ hw->phy_spd_default);
+ if (ret_val)
+ return ret_val;
+ /* Fall Through */
+ default:
+ /* Restore LEDCTL settings */
+ ew32(LEDCTL, hw->ledctl_default);
+ break;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_on - Turns on the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_on(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ e_dbg("e1000_led_on");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn on the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn on the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode2);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_off - Turns off the software controllable LED
+ * @hw: Struct containing variables accessed by shared code
+ */
+s32 e1000_led_off(struct e1000_hw *hw)
+{
+ u32 ctrl = er32(CTRL);
+
+ e_dbg("e1000_led_off");
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ break;
+ case e1000_82544:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Clear SW Defineable Pin 0 to turn off the LED */
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ }
+ break;
+ default:
+ if (hw->media_type == e1000_media_type_fiber) {
+ /* Set SW Defineable Pin 0 to turn off the LED */
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ } else if (hw->media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->ledctl_mode1);
+ return E1000_SUCCESS;
+ }
+ break;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_clear_hw_cntrs - Clears all hardware statistics counters.
+ * @hw: Struct containing variables accessed by shared code
+ */
+static void e1000_clear_hw_cntrs(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ temp = er32(CRCERRS);
+ temp = er32(SYMERRS);
+ temp = er32(MPC);
+ temp = er32(SCC);
+ temp = er32(ECOL);
+ temp = er32(MCC);
+ temp = er32(LATECOL);
+ temp = er32(COLC);
+ temp = er32(DC);
+ temp = er32(SEC);
+ temp = er32(RLEC);
+ temp = er32(XONRXC);
+ temp = er32(XONTXC);
+ temp = er32(XOFFRXC);
+ temp = er32(XOFFTXC);
+ temp = er32(FCRUC);
+
+ temp = er32(PRC64);
+ temp = er32(PRC127);
+ temp = er32(PRC255);
+ temp = er32(PRC511);
+ temp = er32(PRC1023);
+ temp = er32(PRC1522);
+
+ temp = er32(GPRC);
+ temp = er32(BPRC);
+ temp = er32(MPRC);
+ temp = er32(GPTC);
+ temp = er32(GORCL);
+ temp = er32(GORCH);
+ temp = er32(GOTCL);
+ temp = er32(GOTCH);
+ temp = er32(RNBC);
+ temp = er32(RUC);
+ temp = er32(RFC);
+ temp = er32(ROC);
+ temp = er32(RJC);
+ temp = er32(TORL);
+ temp = er32(TORH);
+ temp = er32(TOTL);
+ temp = er32(TOTH);
+ temp = er32(TPR);
+ temp = er32(TPT);
+
+ temp = er32(PTC64);
+ temp = er32(PTC127);
+ temp = er32(PTC255);
+ temp = er32(PTC511);
+ temp = er32(PTC1023);
+ temp = er32(PTC1522);
+
+ temp = er32(MPTC);
+ temp = er32(BPTC);
+
+ if (hw->mac_type < e1000_82543)
+ return;
+
+ temp = er32(ALGNERRC);
+ temp = er32(RXERRC);
+ temp = er32(TNCRS);
+ temp = er32(CEXTERR);
+ temp = er32(TSCTC);
+ temp = er32(TSCTFC);
+
+ if (hw->mac_type <= e1000_82544)
+ return;
+
+ temp = er32(MGTPRC);
+ temp = er32(MGTPDC);
+ temp = er32(MGTPTC);
+}
+
+/**
+ * e1000_reset_adaptive - Resets Adaptive IFS to its default state.
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Call this after e1000_init_hw. You may override the IFS defaults by setting
+ * hw->ifs_params_forced to true. However, you must initialize hw->
+ * current_ifs_val, ifs_min_val, ifs_max_val, ifs_step_size, and ifs_ratio
+ * before calling this function.
+ */
+void e1000_reset_adaptive(struct e1000_hw *hw)
+{
+ e_dbg("e1000_reset_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if (!hw->ifs_params_forced) {
+ hw->current_ifs_val = 0;
+ hw->ifs_min_val = IFS_MIN;
+ hw->ifs_max_val = IFS_MAX;
+ hw->ifs_step_size = IFS_STEP;
+ hw->ifs_ratio = IFS_RATIO;
+ }
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ } else {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_update_adaptive - update adaptive IFS
+ * @hw: Struct containing variables accessed by shared code
+ * @tx_packets: Number of transmits since last callback
+ * @total_collisions: Number of collisions since last callback
+ *
+ * Called during the callback/watchdog routine to update IFS value based on
+ * the ratio of transmits to collisions.
+ */
+void e1000_update_adaptive(struct e1000_hw *hw)
+{
+ e_dbg("e1000_update_adaptive");
+
+ if (hw->adaptive_ifs) {
+ if ((hw->collision_delta *hw->ifs_ratio) > hw->tx_packet_delta) {
+ if (hw->tx_packet_delta > MIN_NUM_XMITS) {
+ hw->in_ifs_mode = true;
+ if (hw->current_ifs_val < hw->ifs_max_val) {
+ if (hw->current_ifs_val == 0)
+ hw->current_ifs_val =
+ hw->ifs_min_val;
+ else
+ hw->current_ifs_val +=
+ hw->ifs_step_size;
+ ew32(AIT, hw->current_ifs_val);
+ }
+ }
+ } else {
+ if (hw->in_ifs_mode
+ && (hw->tx_packet_delta <= MIN_NUM_XMITS)) {
+ hw->current_ifs_val = 0;
+ hw->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+ } else {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ }
+}
+
+/**
+ * e1000_tbi_adjust_stats
+ * @hw: Struct containing variables accessed by shared code
+ * @frame_len: The length of the frame in question
+ * @mac_addr: The Ethernet destination address of the frame in question
+ *
+ * Adjusts the statistic counters when a frame is accepted by TBI_ACCEPT
+ */
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 *mac_addr)
+{
+ u64 carry_bit;
+
+ /* First adjust the frame length. */
+ frame_len--;
+ /* We need to adjust the statistics counters, since the hardware
+ * counters overcount this packet as a CRC error and undercount
+ * the packet as a good packet
+ */
+ /* This packet should not be counted as a CRC error. */
+ stats->crcerrs--;
+ /* This packet does count as a Good Packet Received. */
+ stats->gprc++;
+
+ /* Adjust the Good Octets received counters */
+ carry_bit = 0x80000000 & stats->gorcl;
+ stats->gorcl += frame_len;
+ /* If the high bit of Gorcl (the low 32 bits of the Good Octets
+ * Received Count) was one before the addition,
+ * AND it is zero after, then we lost the carry out,
+ * need to add one to Gorch (Good Octets Received Count High).
+ * This could be simplified if all environments supported
+ * 64-bit integers.
+ */
+ if (carry_bit && ((stats->gorcl & 0x80000000) == 0))
+ stats->gorch++;
+ /* Is this a broadcast or multicast? Check broadcast first,
+ * since the test for a multicast frame will test positive on
+ * a broadcast frame.
+ */
+ if ((mac_addr[0] == (u8) 0xff) && (mac_addr[1] == (u8) 0xff))
+ /* Broadcast packet */
+ stats->bprc++;
+ else if (*mac_addr & 0x01)
+ /* Multicast packet */
+ stats->mprc++;
+
+ if (frame_len == hw->max_frame_size) {
+ /* In this case, the hardware has overcounted the number of
+ * oversize frames.
+ */
+ if (stats->roc > 0)
+ stats->roc--;
+ }
+
+ /* Adjust the bin counters when the extra byte put the frame in the
+ * wrong bin. Remember that the frame_len was adjusted above.
+ */
+ if (frame_len == 64) {
+ stats->prc64++;
+ stats->prc127--;
+ } else if (frame_len == 127) {
+ stats->prc127++;
+ stats->prc255--;
+ } else if (frame_len == 255) {
+ stats->prc255++;
+ stats->prc511--;
+ } else if (frame_len == 511) {
+ stats->prc511++;
+ stats->prc1023--;
+ } else if (frame_len == 1023) {
+ stats->prc1023++;
+ stats->prc1522--;
+ } else if (frame_len == 1522) {
+ stats->prc1522++;
+ }
+}
+
+/**
+ * e1000_get_bus_info
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Gets the current PCI bus type, speed, and width of the hardware
+ */
+void e1000_get_bus_info(struct e1000_hw *hw)
+{
+ u32 status;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ hw->bus_type = e1000_bus_type_pci;
+ hw->bus_speed = e1000_bus_speed_unknown;
+ hw->bus_width = e1000_bus_width_unknown;
+ break;
+ default:
+ status = er32(STATUS);
+ hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ?
+ e1000_bus_type_pcix : e1000_bus_type_pci;
+
+ if (hw->device_id == E1000_DEV_ID_82546EB_QUAD_COPPER) {
+ hw->bus_speed = (hw->bus_type == e1000_bus_type_pci) ?
+ e1000_bus_speed_66 : e1000_bus_speed_120;
+ } else if (hw->bus_type == e1000_bus_type_pci) {
+ hw->bus_speed = (status & E1000_STATUS_PCI66) ?
+ e1000_bus_speed_66 : e1000_bus_speed_33;
+ } else {
+ switch (status & E1000_STATUS_PCIX_SPEED) {
+ case E1000_STATUS_PCIX_SPEED_66:
+ hw->bus_speed = e1000_bus_speed_66;
+ break;
+ case E1000_STATUS_PCIX_SPEED_100:
+ hw->bus_speed = e1000_bus_speed_100;
+ break;
+ case E1000_STATUS_PCIX_SPEED_133:
+ hw->bus_speed = e1000_bus_speed_133;
+ break;
+ default:
+ hw->bus_speed = e1000_bus_speed_reserved;
+ break;
+ }
+ }
+ hw->bus_width = (status & E1000_STATUS_BUS64) ?
+ e1000_bus_width_64 : e1000_bus_width_32;
+ break;
+ }
+}
+
+/**
+ * e1000_write_reg_io
+ * @hw: Struct containing variables accessed by shared code
+ * @offset: offset to write to
+ * @value: value to write
+ *
+ * Writes a value to one of the devices registers using port I/O (as opposed to
+ * memory mapped I/O). Only 82544 and newer devices support port I/O.
+ */
+static void e1000_write_reg_io(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ unsigned long io_addr = hw->io_base;
+ unsigned long io_data = hw->io_base + 4;
+
+ e1000_io_write(hw, io_addr, offset);
+ e1000_io_write(hw, io_data, value);
+}
+
+/**
+ * e1000_get_cable_length - Estimates the cable length.
+ * @hw: Struct containing variables accessed by shared code
+ * @min_length: The estimated minimum length
+ * @max_length: The estimated maximum length
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * This function always returns a ranged length (minimum & maximum).
+ * So for M88 phy's, this function interprets the one value returned from the
+ * register to the minimum and maximum range.
+ * For IGP phy's, the function calculates the range by the AGC registers.
+ */
+static s32 e1000_get_cable_length(struct e1000_hw *hw, u16 *min_length,
+ u16 *max_length)
+{
+ s32 ret_val;
+ u16 agc_value = 0;
+ u16 i, phy_data;
+ u16 cable_length;
+
+ e_dbg("e1000_get_cable_length");
+
+ *min_length = *max_length = 0;
+
+ /* Use old method for Phy older than IGP */
+ if (hw->phy_type == e1000_phy_m88) {
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ cable_length = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+
+ /* Convert the enum value to ranged values */
+ switch (cable_length) {
+ case e1000_cable_length_50:
+ *min_length = 0;
+ *max_length = e1000_igp_cable_length_50;
+ break;
+ case e1000_cable_length_50_80:
+ *min_length = e1000_igp_cable_length_50;
+ *max_length = e1000_igp_cable_length_80;
+ break;
+ case e1000_cable_length_80_110:
+ *min_length = e1000_igp_cable_length_80;
+ *max_length = e1000_igp_cable_length_110;
+ break;
+ case e1000_cable_length_110_140:
+ *min_length = e1000_igp_cable_length_110;
+ *max_length = e1000_igp_cable_length_140;
+ break;
+ case e1000_cable_length_140:
+ *min_length = e1000_igp_cable_length_140;
+ *max_length = e1000_igp_cable_length_170;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+ } else if (hw->phy_type == e1000_phy_igp) { /* For IGP PHY */
+ u16 cur_agc_value;
+ u16 min_agc_value = IGP01E1000_AGC_LENGTH_TABLE_SIZE;
+ static const u16 agc_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+ IGP01E1000_PHY_AGC_A,
+ IGP01E1000_PHY_AGC_B,
+ IGP01E1000_PHY_AGC_C,
+ IGP01E1000_PHY_AGC_D
+ };
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+
+ ret_val =
+ e1000_read_phy_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ cur_agc_value = phy_data >> IGP01E1000_AGC_LENGTH_SHIFT;
+
+ /* Value bound check. */
+ if ((cur_agc_value >=
+ IGP01E1000_AGC_LENGTH_TABLE_SIZE - 1)
+ || (cur_agc_value == 0))
+ return -E1000_ERR_PHY;
+
+ agc_value += cur_agc_value;
+
+ /* Update minimal AGC value. */
+ if (min_agc_value > cur_agc_value)
+ min_agc_value = cur_agc_value;
+ }
+
+ /* Remove the minimal AGC result for length < 50m */
+ if (agc_value <
+ IGP01E1000_PHY_CHANNEL_NUM * e1000_igp_cable_length_50) {
+ agc_value -= min_agc_value;
+
+ /* Get the average length of the remaining 3 channels */
+ agc_value /= (IGP01E1000_PHY_CHANNEL_NUM - 1);
+ } else {
+ /* Get the average length of all the 4 channels. */
+ agc_value /= IGP01E1000_PHY_CHANNEL_NUM;
+ }
+
+ /* Set the range of the calculated length. */
+ *min_length = ((e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) > 0) ?
+ (e1000_igp_cable_length_table[agc_value] -
+ IGP01E1000_AGC_RANGE) : 0;
+ *max_length = e1000_igp_cable_length_table[agc_value] +
+ IGP01E1000_AGC_RANGE;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_polarity - Check the cable polarity
+ * @hw: Struct containing variables accessed by shared code
+ * @polarity: output parameter : 0 - Polarity is not reversed
+ * 1 - Polarity is reversed.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function simply reads the polarity bit in the
+ * Phy Status register. For IGP phy's, this bit is valid only if link speed is
+ * 10 Mbps. If the link speed is 100 Mbps there is no polarity so this bit will
+ * return 0. If the link speed is 1000 Mbps the polarity status is in the
+ * IGP01E1000_PHY_PCS_INIT_REG.
+ */
+static s32 e1000_check_polarity(struct e1000_hw *hw,
+ e1000_rev_polarity *polarity)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_check_polarity");
+
+ if (hw->phy_type == e1000_phy_m88) {
+ /* return the Polarity bit in the Status register. */
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+ *polarity = ((phy_data & M88E1000_PSSR_REV_POLARITY) >>
+ M88E1000_PSSR_REV_POLARITY_SHIFT) ?
+ e1000_rev_polarity_reversed : e1000_rev_polarity_normal;
+
+ } else if (hw->phy_type == e1000_phy_igp) {
+ /* Read the Status register to check the speed */
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* If speed is 1000 Mbps, must read the IGP01E1000_PHY_PCS_INIT_REG to
+ * find the polarity status */
+ if ((phy_data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+
+ /* Read the GIG initialization PCS register (0x00B4) */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PCS_INIT_REG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Check the polarity bits */
+ *polarity = (phy_data & IGP01E1000_PHY_POLARITY_MASK) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ } else {
+ /* For 10 Mbps, read the polarity bit in the status register. (for
+ * 100 Mbps this bit is always 0) */
+ *polarity =
+ (phy_data & IGP01E1000_PSSR_POLARITY_REVERSED) ?
+ e1000_rev_polarity_reversed :
+ e1000_rev_polarity_normal;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_downshift - Check if Downshift occurred
+ * @hw: Struct containing variables accessed by shared code
+ * @downshift: output parameter : 0 - No Downshift occurred.
+ * 1 - Downshift occurred.
+ *
+ * returns: - E1000_ERR_XXX
+ * E1000_SUCCESS
+ *
+ * For phy's older than IGP, this function reads the Downshift bit in the Phy
+ * Specific Status register. For IGP phy's, it reads the Downgrade bit in the
+ * Link Health register. In IGP this bit is latched high, so the driver must
+ * read it immediately after link is established.
+ */
+static s32 e1000_check_downshift(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ e_dbg("e1000_check_downshift");
+
+ if (hw->phy_type == e1000_phy_igp) {
+ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded =
+ (phy_data & IGP01E1000_PLHR_SS_DOWNGRADE) ? 1 : 0;
+ } else if (hw->phy_type == e1000_phy_m88) {
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >>
+ M88E1000_PSSR_DOWNSHIFT_SHIFT;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_config_dsp_after_link_change
+ * @hw: Struct containing variables accessed by shared code
+ * @link_up: was link up at the time this was called
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ *
+ * 82541_rev_2 & 82547_rev_2 have the capability to configure the DSP when a
+ * gigabit link is achieved to improve link quality.
+ */
+
+static s32 e1000_config_dsp_after_link_change(struct e1000_hw *hw, bool link_up)
+{
+ s32 ret_val;
+ u16 phy_data, phy_saved_data, speed, duplex, i;
+ static const u16 dsp_reg_array[IGP01E1000_PHY_CHANNEL_NUM] = {
+ IGP01E1000_PHY_AGC_PARAM_A,
+ IGP01E1000_PHY_AGC_PARAM_B,
+ IGP01E1000_PHY_AGC_PARAM_C,
+ IGP01E1000_PHY_AGC_PARAM_D
+ };
+ u16 min_length, max_length;
+
+ e_dbg("e1000_config_dsp_after_link_change");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ if (link_up) {
+ ret_val = e1000_get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ e_dbg("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (speed == SPEED_1000) {
+
+ ret_val =
+ e1000_get_cable_length(hw, &min_length,
+ &max_length);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->dsp_config_state == e1000_dsp_config_enabled)
+ && min_length >= e1000_igp_cable_length_50) {
+
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw,
+ dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &=
+ ~IGP01E1000_PHY_EDAC_MU_INDEX;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ dsp_reg_array
+ [i], phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ hw->dsp_config_state =
+ e1000_dsp_config_activated;
+ }
+
+ if ((hw->ffe_config_state == e1000_ffe_config_enabled)
+ && (min_length < e1000_igp_cable_length_50)) {
+
+ u16 ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_20;
+ u32 idle_errs = 0;
+
+ /* clear previous idle error counts */
+ ret_val =
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ for (i = 0; i < ffe_idle_err_timeout; i++) {
+ udelay(1000);
+ ret_val =
+ e1000_read_phy_reg(hw,
+ PHY_1000T_STATUS,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ idle_errs +=
+ (phy_data &
+ SR_1000T_IDLE_ERROR_CNT);
+ if (idle_errs >
+ SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT)
+ {
+ hw->ffe_config_state =
+ e1000_ffe_config_active;
+
+ ret_val =
+ e1000_write_phy_reg(hw,
+ IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_CM_CP);
+ if (ret_val)
+ return ret_val;
+ break;
+ }
+
+ if (idle_errs)
+ ffe_idle_err_timeout =
+ FFE_IDLE_ERR_COUNT_TIMEOUT_100;
+ }
+ }
+ }
+ } else {
+ if (hw->dsp_config_state == e1000_dsp_config_activated) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ for (i = 0; i < IGP01E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val =
+ e1000_read_phy_reg(hw, dsp_reg_array[i],
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PHY_EDAC_MU_INDEX;
+ phy_data |= IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS;
+
+ ret_val =
+ e1000_write_phy_reg(hw, dsp_reg_array[i],
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->dsp_config_state = e1000_dsp_config_enabled;
+ }
+
+ if (hw->ffe_config_state == e1000_ffe_config_active) {
+ /* Save off the current value of register 0x2F5B to be restored at
+ * the end of the routines. */
+ ret_val =
+ e1000_read_phy_reg(hw, 0x2F5B, &phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ /* Disable the PHY transmitter */
+ ret_val = e1000_write_phy_reg(hw, 0x2F5B, 0x0003);
+
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_FORCE_GIGA);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_DSP_FFE,
+ IGP01E1000_PHY_DSP_FFE_DEFAULT);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, 0x0000,
+ IGP01E1000_IEEE_RESTART_AUTONEG);
+ if (ret_val)
+ return ret_val;
+
+ mdelay(20);
+
+ /* Now enable the transmitter */
+ ret_val =
+ e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data);
+
+ if (ret_val)
+ return ret_val;
+
+ hw->ffe_config_state = e1000_ffe_config_enabled;
+ }
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_phy_mode - Set PHY to class A mode
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Assumes the following operations will follow to enable the new class mode.
+ * 1. Do a PHY soft reset
+ * 2. Restart auto-negotiation or force link.
+ */
+static s32 e1000_set_phy_mode(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 eeprom_data;
+
+ e_dbg("e1000_set_phy_mode");
+
+ if ((hw->mac_type == e1000_82545_rev_3) &&
+ (hw->media_type == e1000_media_type_copper)) {
+ ret_val =
+ e1000_read_eeprom(hw, EEPROM_PHY_CLASS_WORD, 1,
+ &eeprom_data);
+ if (ret_val) {
+ return ret_val;
+ }
+
+ if ((eeprom_data != EEPROM_RESERVED_WORD) &&
+ (eeprom_data & EEPROM_PHY_CLASS_A)) {
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x000B);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL,
+ 0x8104);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy_reset_disable = false;
+ }
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_d3_lplu_state - set d3 link power state
+ * @hw: Struct containing variables accessed by shared code
+ * @active: true to enable lplu false to disable lplu.
+ *
+ * This function sets the lplu state according to the active flag. When
+ * activating lplu this function also disables smart speed and vise versa.
+ * lplu will not be activated unless the device autonegotiation advertisement
+ * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes.
+ *
+ * returns: - E1000_ERR_PHY if fail to read/write the PHY
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val;
+ u16 phy_data;
+ e_dbg("e1000_set_d3_lplu_state");
+
+ if (hw->phy_type != e1000_phy_igp)
+ return E1000_SUCCESS;
+
+ /* During driver activity LPLU should not be used or it will attain link
+ * from the lowest speeds starting from 10Mbps. The capability is used for
+ * Dx transitions and states */
+ if (hw->mac_type == e1000_82541_rev_2
+ || hw->mac_type == e1000_82547_rev_2) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (!active) {
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data &= ~IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during
+ * Dx states where the power conservation is most important. During
+ * driver activity we should enable SmartSpeed, so performance is
+ * maintained. */
+ if (hw->smart_speed == e1000_smart_speed_on) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ } else if (hw->smart_speed == e1000_smart_speed_off) {
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((hw->autoneg_advertised == AUTONEG_ADVERTISE_SPEED_DEFAULT)
+ || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL)
+ || (hw->autoneg_advertised ==
+ AUTONEG_ADVERTISE_10_100_ALL)) {
+
+ if (hw->mac_type == e1000_82541_rev_2 ||
+ hw->mac_type == e1000_82547_rev_2) {
+ phy_data |= IGP01E1000_GMII_FLEX_SPD;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* When LPLU is enabled we should disable SmartSpeed */
+ ret_val =
+ e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val =
+ e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ phy_data);
+ if (ret_val)
+ return ret_val;
+
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_set_vco_speed
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Change VCO speed register to improve Bit Error Rate performance of SERDES.
+ */
+static s32 e1000_set_vco_speed(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 default_page = 0;
+ u16 phy_data;
+
+ e_dbg("e1000_set_vco_speed");
+
+ switch (hw->mac_type) {
+ case e1000_82545_rev_3:
+ case e1000_82546_rev_3:
+ break;
+ default:
+ return E1000_SUCCESS;
+ }
+
+ /* Set PHY register 30, page 5, bit 8 to 0 */
+
+ ret_val =
+ e1000_read_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, &default_page);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0005);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PHY_VCO_REG_BIT8;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY register 30, page 4, bit 11 to 1 */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0004);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PHY_VCO_REG_BIT11;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val =
+ e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, default_page);
+ if (ret_val)
+ return ret_val;
+
+ return E1000_SUCCESS;
+}
+
+
+/**
+ * e1000_enable_mng_pass_thru - check for bmc pass through
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Verifies the hardware needs to allow ARPs to be processed by the host
+ * returns: - true/false
+ */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ if (hw->asf_firmware_present) {
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN) ||
+ !(manc & E1000_MANC_EN_MAC_ADDR_FILTER))
+ return false;
+ if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN))
+ return true;
+ }
+ return false;
+}
+
+static s32 e1000_polarity_reversal_workaround(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 mii_status_reg;
+ u16 i;
+
+ /* Polarity reversal workaround for forced 10F/10H links. */
+
+ /* Disable the transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the NO link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be clear.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if ((mii_status_reg & ~MII_SR_LINK_STATUS) == 0)
+ break;
+ mdelay(100);
+ }
+
+ /* Recommended delay time after link has been lost */
+ mdelay(1000);
+
+ /* Now we will re-enable th transmitter on the PHY */
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0019);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFFF0);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xFF00);
+ if (ret_val)
+ return ret_val;
+ mdelay(50);
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_GEN_CONTROL, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_PAGE_SELECT, 0x0000);
+ if (ret_val)
+ return ret_val;
+
+ /* This loop will early-out if the link condition has been met. */
+ for (i = PHY_FORCE_TIME; i > 0; i--) {
+ /* Read the MII Status Register and wait for Link Status bit
+ * to be set.
+ */
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_phy_reg(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (mii_status_reg & MII_SR_LINK_STATUS)
+ break;
+ mdelay(100);
+ }
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_auto_rd_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Check for EEPROM Auto Read bit done.
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_auto_rd_done(struct e1000_hw *hw)
+{
+ e_dbg("e1000_get_auto_rd_done");
+ msleep(5);
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_get_phy_cfg_done
+ * @hw: Struct containing variables accessed by shared code
+ *
+ * Checks if the PHY configuration is done
+ * returns: - E1000_ERR_RESET if fail to reset MAC
+ * E1000_SUCCESS at any other case.
+ */
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ e_dbg("e1000_get_phy_cfg_done");
+ mdelay(10);
+ return E1000_SUCCESS;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_hw.h
+ * Structures, enums, and macros for the MAC
+ */
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include "e1000_osdep.h"
+
+
+/* Forward declarations of structures used by the shared code */
+struct e1000_hw;
+struct e1000_hw_stats;
+
+/* Enumerated types specific to the e1000 hardware */
+/* Media Access Controllers */
+typedef enum {
+ e1000_undefined = 0,
+ e1000_82542_rev2_0,
+ e1000_82542_rev2_1,
+ e1000_82543,
+ e1000_82544,
+ e1000_82540,
+ e1000_82545,
+ e1000_82545_rev_3,
+ e1000_82546,
+ e1000_ce4100,
+ e1000_82546_rev_3,
+ e1000_82541,
+ e1000_82541_rev_2,
+ e1000_82547,
+ e1000_82547_rev_2,
+ e1000_num_macs
+} e1000_mac_type;
+
+typedef enum {
+ e1000_eeprom_uninitialized = 0,
+ e1000_eeprom_spi,
+ e1000_eeprom_microwire,
+ e1000_eeprom_flash,
+ e1000_eeprom_none, /* No NVM support */
+ e1000_num_eeprom_types
+} e1000_eeprom_type;
+
+/* Media Types */
+typedef enum {
+ e1000_media_type_copper = 0,
+ e1000_media_type_fiber = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+} e1000_media_type;
+
+typedef enum {
+ e1000_10_half = 0,
+ e1000_10_full = 1,
+ e1000_100_half = 2,
+ e1000_100_full = 3
+} e1000_speed_duplex_type;
+
+/* Flow Control Settings */
+typedef enum {
+ E1000_FC_NONE = 0,
+ E1000_FC_RX_PAUSE = 1,
+ E1000_FC_TX_PAUSE = 2,
+ E1000_FC_FULL = 3,
+ E1000_FC_DEFAULT = 0xFF
+} e1000_fc_type;
+
+struct e1000_shadow_ram {
+ u16 eeprom_word;
+ bool modified;
+};
+
+/* PCI bus types */
+typedef enum {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_reserved
+} e1000_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_reserved
+} e1000_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+} e1000_bus_width;
+
+/* PHY status info structure and supporting enums */
+typedef enum {
+ e1000_cable_length_50 = 0,
+ e1000_cable_length_50_80,
+ e1000_cable_length_80_110,
+ e1000_cable_length_110_140,
+ e1000_cable_length_140,
+ e1000_cable_length_undefined = 0xFF
+} e1000_cable_length;
+
+typedef enum {
+ e1000_gg_cable_length_60 = 0,
+ e1000_gg_cable_length_60_115 = 1,
+ e1000_gg_cable_length_115_150 = 2,
+ e1000_gg_cable_length_150 = 4
+} e1000_gg_cable_length;
+
+typedef enum {
+ e1000_igp_cable_length_10 = 10,
+ e1000_igp_cable_length_20 = 20,
+ e1000_igp_cable_length_30 = 30,
+ e1000_igp_cable_length_40 = 40,
+ e1000_igp_cable_length_50 = 50,
+ e1000_igp_cable_length_60 = 60,
+ e1000_igp_cable_length_70 = 70,
+ e1000_igp_cable_length_80 = 80,
+ e1000_igp_cable_length_90 = 90,
+ e1000_igp_cable_length_100 = 100,
+ e1000_igp_cable_length_110 = 110,
+ e1000_igp_cable_length_115 = 115,
+ e1000_igp_cable_length_120 = 120,
+ e1000_igp_cable_length_130 = 130,
+ e1000_igp_cable_length_140 = 140,
+ e1000_igp_cable_length_150 = 150,
+ e1000_igp_cable_length_160 = 160,
+ e1000_igp_cable_length_170 = 170,
+ e1000_igp_cable_length_180 = 180
+} e1000_igp_cable_length;
+
+typedef enum {
+ e1000_10bt_ext_dist_enable_normal = 0,
+ e1000_10bt_ext_dist_enable_lower,
+ e1000_10bt_ext_dist_enable_undefined = 0xFF
+} e1000_10bt_ext_dist_enable;
+
+typedef enum {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+} e1000_rev_polarity;
+
+typedef enum {
+ e1000_downshift_normal = 0,
+ e1000_downshift_activated,
+ e1000_downshift_undefined = 0xFF
+} e1000_downshift;
+
+typedef enum {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+} e1000_smart_speed;
+
+typedef enum {
+ e1000_polarity_reversal_enabled = 0,
+ e1000_polarity_reversal_disabled,
+ e1000_polarity_reversal_undefined = 0xFF
+} e1000_polarity_reversal;
+
+typedef enum {
+ e1000_auto_x_mode_manual_mdi = 0,
+ e1000_auto_x_mode_manual_mdix,
+ e1000_auto_x_mode_auto1,
+ e1000_auto_x_mode_auto2,
+ e1000_auto_x_mode_undefined = 0xFF
+} e1000_auto_x_mode;
+
+typedef enum {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+} e1000_1000t_rx_status;
+
+typedef enum {
+ e1000_phy_m88 = 0,
+ e1000_phy_igp,
+ e1000_phy_8211,
+ e1000_phy_8201,
+ e1000_phy_undefined = 0xFF
+} e1000_phy_type;
+
+typedef enum {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+} e1000_ms_type;
+
+typedef enum {
+ e1000_ffe_config_enabled = 0,
+ e1000_ffe_config_active,
+ e1000_ffe_config_blocked
+} e1000_ffe_config;
+
+typedef enum {
+ e1000_dsp_config_disabled = 0,
+ e1000_dsp_config_enabled,
+ e1000_dsp_config_activated,
+ e1000_dsp_config_undefined = 0xFF
+} e1000_dsp_config;
+
+struct e1000_phy_info {
+ e1000_cable_length cable_length;
+ e1000_10bt_ext_dist_enable extended_10bt_distance;
+ e1000_rev_polarity cable_polarity;
+ e1000_downshift downshift;
+ e1000_polarity_reversal polarity_correction;
+ e1000_auto_x_mode mdix_mode;
+ e1000_1000t_rx_status local_rx;
+ e1000_1000t_rx_status remote_rx;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_eeprom_info {
+ e1000_eeprom_type type;
+ u16 word_size;
+ u16 opcode_bits;
+ u16 address_bits;
+ u16 delay_usec;
+ u16 page_size;
+};
+
+/* Flex ASF Information */
+#define E1000_HOST_IF_MAX_SIZE 2048
+
+typedef enum {
+ e1000_byte_align = 0,
+ e1000_word_align = 1,
+ e1000_dword_align = 2
+} e1000_align_type;
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_EEPROM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_TYPE 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+
+#define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
+ (((_value) & 0xff00) >> 8))
+
+/* Function prototypes */
+/* Initialization */
+s32 e1000_reset_hw(struct e1000_hw *hw);
+s32 e1000_init_hw(struct e1000_hw *hw);
+s32 e1000_set_mac_type(struct e1000_hw *hw);
+void e1000_set_media_type(struct e1000_hw *hw);
+
+/* Link Configuration */
+s32 e1000_setup_link(struct e1000_hw *hw);
+s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
+void e1000_config_collision_dist(struct e1000_hw *hw);
+s32 e1000_check_for_link(struct e1000_hw *hw);
+s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
+s32 e1000_force_mac_fc(struct e1000_hw *hw);
+
+/* PHY */
+s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
+s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
+s32 e1000_phy_hw_reset(struct e1000_hw *hw);
+s32 e1000_phy_reset(struct e1000_hw *hw);
+s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
+s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
+
+/* EEPROM Functions */
+s32 e1000_init_eeprom_params(struct e1000_hw *hw);
+
+/* MNG HOST IF functions */
+u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
+
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */
+
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_ICH_IAMT_MODE 0x2
+#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */
+#define E1000_VFTA_ENTRY_SHIFT 0x5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658 */
+};
+#ifdef __BIG_ENDIAN
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u16 vlan_id;
+ u8 reserved0;
+ u8 status;
+ u32 reserved1;
+ u8 checksum;
+ u8 reserved3;
+ u16 reserved2;
+};
+#else
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+#endif
+
+bool e1000_check_mng_mode(struct e1000_hw *hw);
+s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
+s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
+s32 e1000_read_mac_addr(struct e1000_hw *hw);
+
+/* Filters (multicast, vlan, receive) */
+u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
+void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
+void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
+void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
+
+/* LED functions */
+s32 e1000_setup_led(struct e1000_hw *hw);
+s32 e1000_cleanup_led(struct e1000_hw *hw);
+s32 e1000_led_on(struct e1000_hw *hw);
+s32 e1000_led_off(struct e1000_hw *hw);
+s32 e1000_blink_led_start(struct e1000_hw *hw);
+
+/* Adaptive IFS Functions */
+
+/* Everything else */
+void e1000_reset_adaptive(struct e1000_hw *hw);
+void e1000_update_adaptive(struct e1000_hw *hw);
+void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
+ u32 frame_len, u8 * mac_addr);
+void e1000_get_bus_info(struct e1000_hw *hw);
+void e1000_pci_set_mwi(struct e1000_hw *hw);
+void e1000_pci_clear_mwi(struct e1000_hw *hw);
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
+/* Port I/O is only supported on 82544 and newer */
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
+
+#define E1000_READ_REG_IO(a, reg) \
+ e1000_read_reg_io((a), E1000_##reg)
+#define E1000_WRITE_REG_IO(a, reg, val) \
+ e1000_write_reg_io((a), E1000_##reg, val)
+
+/* PCI Device IDs */
+#define E1000_DEV_ID_82542 0x1000
+#define E1000_DEV_ID_82543GC_FIBER 0x1001
+#define E1000_DEV_ID_82543GC_COPPER 0x1004
+#define E1000_DEV_ID_82544EI_COPPER 0x1008
+#define E1000_DEV_ID_82544EI_FIBER 0x1009
+#define E1000_DEV_ID_82544GC_COPPER 0x100C
+#define E1000_DEV_ID_82544GC_LOM 0x100D
+#define E1000_DEV_ID_82540EM 0x100E
+#define E1000_DEV_ID_82540EM_LOM 0x1015
+#define E1000_DEV_ID_82540EP_LOM 0x1016
+#define E1000_DEV_ID_82540EP 0x1017
+#define E1000_DEV_ID_82540EP_LP 0x101E
+#define E1000_DEV_ID_82545EM_COPPER 0x100F
+#define E1000_DEV_ID_82545EM_FIBER 0x1011
+#define E1000_DEV_ID_82545GM_COPPER 0x1026
+#define E1000_DEV_ID_82545GM_FIBER 0x1027
+#define E1000_DEV_ID_82545GM_SERDES 0x1028
+#define E1000_DEV_ID_82546EB_COPPER 0x1010
+#define E1000_DEV_ID_82546EB_FIBER 0x1012
+#define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
+#define E1000_DEV_ID_82541EI 0x1013
+#define E1000_DEV_ID_82541EI_MOBILE 0x1018
+#define E1000_DEV_ID_82541ER_LOM 0x1014
+#define E1000_DEV_ID_82541ER 0x1078
+#define E1000_DEV_ID_82547GI 0x1075
+#define E1000_DEV_ID_82541GI 0x1076
+#define E1000_DEV_ID_82541GI_MOBILE 0x1077
+#define E1000_DEV_ID_82541GI_LF 0x107C
+#define E1000_DEV_ID_82546GB_COPPER 0x1079
+#define E1000_DEV_ID_82546GB_FIBER 0x107A
+#define E1000_DEV_ID_82546GB_SERDES 0x107B
+#define E1000_DEV_ID_82546GB_PCIE 0x108A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
+#define E1000_DEV_ID_82547EI 0x1019
+#define E1000_DEV_ID_82547EI_MOBILE 0x101A
+#define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
+#define E1000_DEV_ID_INTEL_CE4100_GBE 0x2E6E
+
+#define NODE_ADDRESS_SIZE 6
+#define ETH_LENGTH_OF_ADDRESS 6
+
+/* MAC decode size is 128K - This is the size of BAR0 */
+#define MAC_DECODE_SIZE (128 * 1024)
+
+#define E1000_82542_2_0_REV_ID 2
+#define E1000_82542_2_1_REV_ID 3
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* The sizes (in bytes) of a ethernet packet */
+#define ENET_HEADER_SIZE 14
+#define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */
+#define ETHERNET_FCS_SIZE 4
+#define MINIMUM_ETHERNET_PACKET_SIZE \
+ (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
+#define CRC_LENGTH ETHERNET_FCS_SIZE
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Sizes */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMAed) */
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+#define ETHERNET_IP_TYPE 0x0800 /* IP packets */
+#define ETHERNET_ARP_TYPE 0x0806 /* Address Resolution Protocol (ARP) */
+
+/* Packet Header defines */
+#define IP_PROTOCOL_TCP 6
+#define IP_PROTOCOL_UDP 0x11
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ */
+#define POLL_IMS_ENABLE_MASK ( \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ)
+
+/* This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor. We
+ * reserve one of these spots for our directed address, allowing us room for
+ * E1000_RAR_ENTRIES - 1 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */
+#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define E1000_RXD_SPC_PRI_SHIFT 13
+#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define E1000_RXD_SPC_CFI_SHIFT 12
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length; /* */
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext; /* */
+ u8 cmd; /* */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Filters */
+#define E1000_NUM_UNICAST 16 /* Unicast filter entries */
+#define E1000_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address Register */
+struct e1000_rar {
+ volatile __le32 low; /* receive address low */
+ volatile __le32 high; /* receive address high */
+};
+
+/* Number of entries in the Multicast Table Array (MTA). */
+#define E1000_NUM_MTA_REGISTERS 128
+
+/* IPv4 Address Table Entry */
+struct e1000_ipv4_at_entry {
+ volatile u32 ipv4_addr; /* IP Address (RW) */
+ volatile u32 reserved;
+};
+
+/* Four wakeup IP addresses are supported */
+#define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
+#define E1000_IP4AT_SIZE E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
+#define E1000_IP6AT_SIZE 1
+
+/* IPv6 Address Table Entry */
+struct e1000_ipv6_at_entry {
+ volatile u8 ipv6_addr[16];
+};
+
+/* Flexible Filter Length Table Entry */
+struct e1000_fflt_entry {
+ volatile u32 length; /* Flexible Filter Length (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Mask Table Entry */
+struct e1000_ffmt_entry {
+ volatile u32 mask; /* Flexible Filter Mask (RW) */
+ volatile u32 reserved;
+};
+
+/* Flexible Filter Value Table Entry */
+struct e1000_ffvt_entry {
+ volatile u32 value; /* Flexible Filter Value (RW) */
+ volatile u32 reserved;
+};
+
+/* Four Flexible Filters are supported */
+#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128
+
+#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
+#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
+
+#define E1000_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Register Set. (82543, 82544)
+ *
+ * Registers are defined to be 32 bits and should be accessed as 32 bit values.
+ * These registers are physically located on the NIC, but are mapped into the
+ * host memory address space.
+ *
+ * RW - register is both readable and writable
+ * RO - register is read only
+ * WO - register is write only
+ * R/clr - register is read only and is cleared when read
+ * A - register array
+ */
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_FLA 0x0001C /* Flash Access - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+
+extern void __iomem *ce4100_gbe_mdio_base_virt;
+#define INTEL_CE_GBE_MDIO_RCOMP_BASE (ce4100_gbe_mdio_base_virt)
+#define E1000_MDIO_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
+#define E1000_MDIO_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
+#define E1000_MDIO_DRV (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
+#define E1000_MDC_CMD (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC)
+#define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20)
+#define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24)
+
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FEXTNVM 0x00028 /* Future Extended NVM register */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+
+/* Auxiliary Control Register. This register is CE4100 specific,
+ * RMII/RGMII function is switched by this register - RW
+ * Following are bits definitions of the Auxiliary Control Register
+ */
+#define E1000_CTL_AUX 0x000E0
+#define E1000_CTL_AUX_END_SEL_SHIFT 10
+#define E1000_CTL_AUX_ENDIANESS_SHIFT 8
+#define E1000_CTL_AUX_RGMII_RMII_SHIFT 0
+
+/* descriptor and packet transfer use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_DES_PKT (0x0 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* descriptor use CTL_AUX.ENDIANESS, packet use default */
+#define E1000_CTL_AUX_DES (0x1 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* descriptor use default, packet use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_PKT (0x2 << E1000_CTL_AUX_END_SEL_SHIFT)
+/* all use CTL_AUX.ENDIANESS */
+#define E1000_CTL_AUX_ALL (0x3 << E1000_CTL_AUX_END_SEL_SHIFT)
+
+#define E1000_CTL_AUX_RGMII (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
+#define E1000_CTL_AUX_RMII (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
+
+/* LW little endian, Byte big endian */
+#define E1000_CTL_AUX_LWLE_BBE (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWLE_BLE (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWBE_BBE (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+#define E1000_CTL_AUX_LWBE_BLE (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT)
+
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_RDTR1 0x02820 /* RX Delay Timer (1) - RW */
+#define E1000_RDBAL1 0x02900 /* RX Descriptor Base Address Low (1) - RW */
+#define E1000_RDBAH1 0x02904 /* RX Descriptor Base Address High (1) - RW */
+#define E1000_RDLEN1 0x02908 /* RX Descriptor Length (1) - RW */
+#define E1000_RDH1 0x02910 /* RX Descriptor Head (1) - RW */
+#define E1000_RDT1 0x02918 /* RX Descriptor Tail (1) - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_RXCW 0x00180 /* RX Configuration Word - RO */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_TBT 0x00448 /* TX Burst Timer - RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */
+#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */
+#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */
+#define FEXTNVM_SW_CONFIG 0x0001
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_FLASH_UPDATES 1000
+#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */
+#define E1000_FLASHT 0x01028 /* FLASH Timer Register */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_FLSWCTL 0x01030 /* FLASH control register */
+#define E1000_FLSWDATA 0x01034 /* FLASH data register */
+#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */
+#define E1000_FLOP 0x0103C /* FLASH Opcode Register */
+#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */
+#define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */
+#define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */
+#define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */
+#define E1000_RDH 0x02810 /* RX Descriptor Head - RW */
+#define E1000_RDT 0x02818 /* RX Descriptor Tail - RW */
+#define E1000_RDTR 0x02820 /* RX Delay Timer - RW */
+#define E1000_RDBAL0 E1000_RDBAL /* RX Desc Base Address Low (0) - RW */
+#define E1000_RDBAH0 E1000_RDBAH /* RX Desc Base Address High (0) - RW */
+#define E1000_RDLEN0 E1000_RDLEN /* RX Desc Length (0) - RW */
+#define E1000_RDH0 E1000_RDH /* RX Desc Head (0) - RW */
+#define E1000_RDT0 E1000_RDT /* RX Desc Tail (0) - RW */
+#define E1000_RDTR0 E1000_RDTR /* RX Delay Timer (0) - RW */
+#define E1000_RXDCTL 0x02828 /* RX Descriptor Control queue 0 - RW */
+#define E1000_RXDCTL1 0x02928 /* RX Descriptor Control queue 1 - RW */
+#define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */
+#define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */
+#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */
+#define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */
+#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* TX Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_TDBAL 0x03800 /* TX Descriptor Base Address Low - RW */
+#define E1000_TDBAH 0x03804 /* TX Descriptor Base Address High - RW */
+#define E1000_TDLEN 0x03808 /* TX Descriptor Length - RW */
+#define E1000_TDH 0x03810 /* TX Descriptor Head - RW */
+#define E1000_TDT 0x03818 /* TX Descripotr Tail - RW */
+#define E1000_TIDV 0x03820 /* TX Interrupt Delay Value - RW */
+#define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */
+#define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */
+#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */
+#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */
+#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */
+#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */
+#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */
+#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */
+#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */
+#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */
+#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control */
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */
+#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */
+#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */
+#define E1000_HOST_IF 0x08800 /* Host Interface */
+#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */
+#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */
+
+#define E1000_KUMCTRLSTA 0x00034 /* MAC-PHY interface - RW */
+#define E1000_MDPHYA 0x0003C /* PHY address - RW */
+#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */
+#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */
+#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */
+#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_FFLT_DBG 0x05F04 /* Debug Register */
+#define E1000_HICR 0x08F00 /* Host Interface Control */
+
+/* RSS registers */
+#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_RETA 0x05C00 /* Redirection Table - RW Array */
+#define E1000_RSSRK 0x05C80 /* RSS Random Key - RW Array */
+#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */
+#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */
+/* Register Set (82542)
+ *
+ * Some of the 82542 registers are located at different offsets than they are
+ * in more current versions of the 8254x. Despite the difference in location,
+ * the registers function in the same manner.
+ */
+#define E1000_82542_CTL_AUX E1000_CTL_AUX
+#define E1000_82542_CTRL E1000_CTRL
+#define E1000_82542_CTRL_DUP E1000_CTRL_DUP
+#define E1000_82542_STATUS E1000_STATUS
+#define E1000_82542_EECD E1000_EECD
+#define E1000_82542_EERD E1000_EERD
+#define E1000_82542_CTRL_EXT E1000_CTRL_EXT
+#define E1000_82542_FLA E1000_FLA
+#define E1000_82542_MDIC E1000_MDIC
+#define E1000_82542_SCTL E1000_SCTL
+#define E1000_82542_FEXTNVM E1000_FEXTNVM
+#define E1000_82542_FCAL E1000_FCAL
+#define E1000_82542_FCAH E1000_FCAH
+#define E1000_82542_FCT E1000_FCT
+#define E1000_82542_VET E1000_VET
+#define E1000_82542_RA 0x00040
+#define E1000_82542_ICR E1000_ICR
+#define E1000_82542_ITR E1000_ITR
+#define E1000_82542_ICS E1000_ICS
+#define E1000_82542_IMS E1000_IMS
+#define E1000_82542_IMC E1000_IMC
+#define E1000_82542_RCTL E1000_RCTL
+#define E1000_82542_RDTR 0x00108
+#define E1000_82542_RDBAL 0x00110
+#define E1000_82542_RDBAH 0x00114
+#define E1000_82542_RDLEN 0x00118
+#define E1000_82542_RDH 0x00120
+#define E1000_82542_RDT 0x00128
+#define E1000_82542_RDTR0 E1000_82542_RDTR
+#define E1000_82542_RDBAL0 E1000_82542_RDBAL
+#define E1000_82542_RDBAH0 E1000_82542_RDBAH
+#define E1000_82542_RDLEN0 E1000_82542_RDLEN
+#define E1000_82542_RDH0 E1000_82542_RDH
+#define E1000_82542_RDT0 E1000_82542_RDT
+#define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8)) /* Split and Replication
+ * RX Control - RW */
+#define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
+#define E1000_82542_RDBAH3 0x02B04 /* RX Desc Base High Queue 3 - RW */
+#define E1000_82542_RDBAL3 0x02B00 /* RX Desc Low Queue 3 - RW */
+#define E1000_82542_RDLEN3 0x02B08 /* RX Desc Length Queue 3 - RW */
+#define E1000_82542_RDH3 0x02B10 /* RX Desc Head Queue 3 - RW */
+#define E1000_82542_RDT3 0x02B18 /* RX Desc Tail Queue 3 - RW */
+#define E1000_82542_RDBAL2 0x02A00 /* RX Desc Base Low Queue 2 - RW */
+#define E1000_82542_RDBAH2 0x02A04 /* RX Desc Base High Queue 2 - RW */
+#define E1000_82542_RDLEN2 0x02A08 /* RX Desc Length Queue 2 - RW */
+#define E1000_82542_RDH2 0x02A10 /* RX Desc Head Queue 2 - RW */
+#define E1000_82542_RDT2 0x02A18 /* RX Desc Tail Queue 2 - RW */
+#define E1000_82542_RDTR1 0x00130
+#define E1000_82542_RDBAL1 0x00138
+#define E1000_82542_RDBAH1 0x0013C
+#define E1000_82542_RDLEN1 0x00140
+#define E1000_82542_RDH1 0x00148
+#define E1000_82542_RDT1 0x00150
+#define E1000_82542_FCRTH 0x00160
+#define E1000_82542_FCRTL 0x00168
+#define E1000_82542_FCTTV E1000_FCTTV
+#define E1000_82542_TXCW E1000_TXCW
+#define E1000_82542_RXCW E1000_RXCW
+#define E1000_82542_MTA 0x00200
+#define E1000_82542_TCTL E1000_TCTL
+#define E1000_82542_TCTL_EXT E1000_TCTL_EXT
+#define E1000_82542_TIPG E1000_TIPG
+#define E1000_82542_TDBAL 0x00420
+#define E1000_82542_TDBAH 0x00424
+#define E1000_82542_TDLEN 0x00428
+#define E1000_82542_TDH 0x00430
+#define E1000_82542_TDT 0x00438
+#define E1000_82542_TIDV 0x00440
+#define E1000_82542_TBT E1000_TBT
+#define E1000_82542_AIT E1000_AIT
+#define E1000_82542_VFTA 0x00600
+#define E1000_82542_LEDCTL E1000_LEDCTL
+#define E1000_82542_PBA E1000_PBA
+#define E1000_82542_PBS E1000_PBS
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_EEARBC E1000_EEARBC
+#define E1000_82542_FLASHT E1000_FLASHT
+#define E1000_82542_EEWR E1000_EEWR
+#define E1000_82542_FLSWCTL E1000_FLSWCTL
+#define E1000_82542_FLSWDATA E1000_FLSWDATA
+#define E1000_82542_FLSWCNT E1000_FLSWCNT
+#define E1000_82542_FLOP E1000_FLOP
+#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL
+#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE
+#define E1000_82542_PHY_CTRL E1000_PHY_CTRL
+#define E1000_82542_ERT E1000_ERT
+#define E1000_82542_RXDCTL E1000_RXDCTL
+#define E1000_82542_RXDCTL1 E1000_RXDCTL1
+#define E1000_82542_RADV E1000_RADV
+#define E1000_82542_RSRPD E1000_RSRPD
+#define E1000_82542_TXDMAC E1000_TXDMAC
+#define E1000_82542_KABGTXD E1000_KABGTXD
+#define E1000_82542_TDFHS E1000_TDFHS
+#define E1000_82542_TDFTS E1000_TDFTS
+#define E1000_82542_TDFPC E1000_TDFPC
+#define E1000_82542_TXDCTL E1000_TXDCTL
+#define E1000_82542_TADV E1000_TADV
+#define E1000_82542_TSPMT E1000_TSPMT
+#define E1000_82542_CRCERRS E1000_CRCERRS
+#define E1000_82542_ALGNERRC E1000_ALGNERRC
+#define E1000_82542_SYMERRS E1000_SYMERRS
+#define E1000_82542_RXERRC E1000_RXERRC
+#define E1000_82542_MPC E1000_MPC
+#define E1000_82542_SCC E1000_SCC
+#define E1000_82542_ECOL E1000_ECOL
+#define E1000_82542_MCC E1000_MCC
+#define E1000_82542_LATECOL E1000_LATECOL
+#define E1000_82542_COLC E1000_COLC
+#define E1000_82542_DC E1000_DC
+#define E1000_82542_TNCRS E1000_TNCRS
+#define E1000_82542_SEC E1000_SEC
+#define E1000_82542_CEXTERR E1000_CEXTERR
+#define E1000_82542_RLEC E1000_RLEC
+#define E1000_82542_XONRXC E1000_XONRXC
+#define E1000_82542_XONTXC E1000_XONTXC
+#define E1000_82542_XOFFRXC E1000_XOFFRXC
+#define E1000_82542_XOFFTXC E1000_XOFFTXC
+#define E1000_82542_FCRUC E1000_FCRUC
+#define E1000_82542_PRC64 E1000_PRC64
+#define E1000_82542_PRC127 E1000_PRC127
+#define E1000_82542_PRC255 E1000_PRC255
+#define E1000_82542_PRC511 E1000_PRC511
+#define E1000_82542_PRC1023 E1000_PRC1023
+#define E1000_82542_PRC1522 E1000_PRC1522
+#define E1000_82542_GPRC E1000_GPRC
+#define E1000_82542_BPRC E1000_BPRC
+#define E1000_82542_MPRC E1000_MPRC
+#define E1000_82542_GPTC E1000_GPTC
+#define E1000_82542_GORCL E1000_GORCL
+#define E1000_82542_GORCH E1000_GORCH
+#define E1000_82542_GOTCL E1000_GOTCL
+#define E1000_82542_GOTCH E1000_GOTCH
+#define E1000_82542_RNBC E1000_RNBC
+#define E1000_82542_RUC E1000_RUC
+#define E1000_82542_RFC E1000_RFC
+#define E1000_82542_ROC E1000_ROC
+#define E1000_82542_RJC E1000_RJC
+#define E1000_82542_MGTPRC E1000_MGTPRC
+#define E1000_82542_MGTPDC E1000_MGTPDC
+#define E1000_82542_MGTPTC E1000_MGTPTC
+#define E1000_82542_TORL E1000_TORL
+#define E1000_82542_TORH E1000_TORH
+#define E1000_82542_TOTL E1000_TOTL
+#define E1000_82542_TOTH E1000_TOTH
+#define E1000_82542_TPR E1000_TPR
+#define E1000_82542_TPT E1000_TPT
+#define E1000_82542_PTC64 E1000_PTC64
+#define E1000_82542_PTC127 E1000_PTC127
+#define E1000_82542_PTC255 E1000_PTC255
+#define E1000_82542_PTC511 E1000_PTC511
+#define E1000_82542_PTC1023 E1000_PTC1023
+#define E1000_82542_PTC1522 E1000_PTC1522
+#define E1000_82542_MPTC E1000_MPTC
+#define E1000_82542_BPTC E1000_BPTC
+#define E1000_82542_TSCTC E1000_TSCTC
+#define E1000_82542_TSCTFC E1000_TSCTFC
+#define E1000_82542_RXCSUM E1000_RXCSUM
+#define E1000_82542_WUC E1000_WUC
+#define E1000_82542_WUFC E1000_WUFC
+#define E1000_82542_WUS E1000_WUS
+#define E1000_82542_MANC E1000_MANC
+#define E1000_82542_IPAV E1000_IPAV
+#define E1000_82542_IP4AT E1000_IP4AT
+#define E1000_82542_IP6AT E1000_IP6AT
+#define E1000_82542_WUPL E1000_WUPL
+#define E1000_82542_WUPM E1000_WUPM
+#define E1000_82542_FFLT E1000_FFLT
+#define E1000_82542_TDFH 0x08010
+#define E1000_82542_TDFT 0x08018
+#define E1000_82542_FFMT E1000_FFMT
+#define E1000_82542_FFVT E1000_FFVT
+#define E1000_82542_HOST_IF E1000_HOST_IF
+#define E1000_82542_IAM E1000_IAM
+#define E1000_82542_EEMNGCTL E1000_EEMNGCTL
+#define E1000_82542_PSRCTL E1000_PSRCTL
+#define E1000_82542_RAID E1000_RAID
+#define E1000_82542_TARC0 E1000_TARC0
+#define E1000_82542_TDBAL1 E1000_TDBAL1
+#define E1000_82542_TDBAH1 E1000_TDBAH1
+#define E1000_82542_TDLEN1 E1000_TDLEN1
+#define E1000_82542_TDH1 E1000_TDH1
+#define E1000_82542_TDT1 E1000_TDT1
+#define E1000_82542_TXDCTL1 E1000_TXDCTL1
+#define E1000_82542_TARC1 E1000_TARC1
+#define E1000_82542_RFCTL E1000_RFCTL
+#define E1000_82542_GCR E1000_GCR
+#define E1000_82542_GSCL_1 E1000_GSCL_1
+#define E1000_82542_GSCL_2 E1000_GSCL_2
+#define E1000_82542_GSCL_3 E1000_GSCL_3
+#define E1000_82542_GSCL_4 E1000_GSCL_4
+#define E1000_82542_FACTPS E1000_FACTPS
+#define E1000_82542_SWSM E1000_SWSM
+#define E1000_82542_FWSM E1000_FWSM
+#define E1000_82542_FFLT_DBG E1000_FFLT_DBG
+#define E1000_82542_IAC E1000_IAC
+#define E1000_82542_ICRXPTC E1000_ICRXPTC
+#define E1000_82542_ICRXATC E1000_ICRXATC
+#define E1000_82542_ICTXPTC E1000_ICTXPTC
+#define E1000_82542_ICTXATC E1000_ICTXATC
+#define E1000_82542_ICTXQEC E1000_ICTXQEC
+#define E1000_82542_ICTXQMTC E1000_ICTXQMTC
+#define E1000_82542_ICRXDMTC E1000_ICRXDMTC
+#define E1000_82542_ICRXOC E1000_ICRXOC
+#define E1000_82542_HICR E1000_HICR
+
+#define E1000_82542_CPUVEC E1000_CPUVEC
+#define E1000_82542_MRQC E1000_MRQC
+#define E1000_82542_RETA E1000_RETA
+#define E1000_82542_RSSRK E1000_RSSRK
+#define E1000_82542_RSSIM E1000_RSSIM
+#define E1000_82542_RSSIR E1000_RSSIR
+#define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
+#define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 txerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorcl;
+ u64 gorch;
+ u64 gotcl;
+ u64 gotch;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rlerrc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 torl;
+ u64 torh;
+ u64 totl;
+ u64 toth;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+/* Structure containing variables used by the shared code (e1000_hw.c) */
+struct e1000_hw {
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ e1000_mac_type mac_type;
+ e1000_phy_type phy_type;
+ u32 phy_init_script;
+ e1000_media_type media_type;
+ void *back;
+ struct e1000_shadow_ram *eeprom_shadow_ram;
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+ e1000_fc_type fc;
+ e1000_bus_speed bus_speed;
+ e1000_bus_width bus_width;
+ e1000_bus_type bus_type;
+ struct e1000_eeprom_info eeprom;
+ e1000_ms_type master_slave;
+ e1000_ms_type original_master_slave;
+ e1000_ffe_config ffe_config_state;
+ u32 asf_firmware_present;
+ u32 eeprom_semaphore_present;
+ unsigned long io_base;
+ u32 phy_id;
+ u32 phy_revision;
+ u32 phy_addr;
+ u32 original_fc;
+ u32 txcw;
+ u32 autoneg_failed;
+ u32 max_frame_size;
+ u32 min_frame_size;
+ u32 mc_filter_type;
+ u32 num_mc_addrs;
+ u32 collision_delta;
+ u32 tx_packet_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ bool tx_pkt_filtering;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+ u16 phy_spd_default;
+ u16 autoneg_advertised;
+ u16 pci_cmd_word;
+ u16 fc_high_water;
+ u16 fc_low_water;
+ u16 fc_pause_time;
+ u16 current_ifs_val;
+ u16 ifs_min_val;
+ u16 ifs_max_val;
+ u16 ifs_step_size;
+ u16 ifs_ratio;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ u8 autoneg;
+ u8 mdix;
+ u8 forced_speed_duplex;
+ u8 wait_autoneg_complete;
+ u8 dma_fairness;
+ u8 mac_addr[NODE_ADDRESS_SIZE];
+ u8 perm_mac_addr[NODE_ADDRESS_SIZE];
+ bool disable_polarity_correction;
+ bool speed_downgraded;
+ e1000_smart_speed smart_speed;
+ e1000_dsp_config dsp_config_state;
+ bool get_link_status;
+ bool serdes_has_link;
+ bool tbi_compatibility_en;
+ bool tbi_compatibility_on;
+ bool laa_is_present;
+ bool phy_reset_disable;
+ bool initialize_hw_bits_disable;
+ bool fc_send_xon;
+ bool fc_strict_ieee;
+ bool report_tx_early;
+ bool adaptive_ifs;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool mng_reg_access_disabled;
+ bool leave_av_bit_off;
+ bool bad_tx_carr_stats_fd;
+ bool has_smbus;
+};
+
+#define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */
+#define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */
+#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */
+#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */
+#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */
+/* Register Bit Masks */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */
+#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */
+#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */
+#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */
+#define E1000_CTRL_FORCE_PHY_RESET 0x00008000 /* Reset both PHY ports, through PHYRST_N pin */
+#define E1000_CTRL_EXT_LINK_EN 0x00010000 /* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */
+#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */
+#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */
+#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */
+#define E1000_STATUS_SPEED_MASK 0x000000C0
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion
+ by EEPROM/Flash */
+#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */
+#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */
+#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */
+#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */
+#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */
+#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */
+#define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disabled */
+#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */
+#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */
+#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */
+#define E1000_STATUS_BMC_LITE 0x01000000 /* BMC external code execution disabled */
+#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */
+#define E1000_STATUS_FUSE_8 0x04000000
+#define E1000_STATUS_FUSE_9 0x08000000
+#define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disabled on port 0 */
+#define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disabled on port 1 */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+#define E1000_STATUS_PCIX_SPEED_66 0x00000000 /* PCI-X bus speed 50-66 MHz */
+#define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus speed 66-100 MHz */
+#define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus speed 100-133 MHz */
+
+/* EEPROM/Flash Control */
+#define E1000_EECD_SK 0x00000001 /* EEPROM Clock */
+#define E1000_EECD_CS 0x00000002 /* EEPROM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* EEPROM Data In */
+#define E1000_EECD_DO 0x00000008 /* EEPROM Data Out */
+#define E1000_EECD_FWE_MASK 0x00000030
+#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define E1000_EECD_FWE_SHIFT 4
+#define E1000_EECD_REQ 0x00000040 /* EEPROM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* EEPROM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* EEPROM Present */
+#define E1000_EECD_SIZE 0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
+#define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
+ * (0-small, 1-large) */
+#define E1000_EECD_TYPE 0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
+#ifndef E1000_EEPROM_GRANT_ATTEMPTS
+#define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */
+#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */
+#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SECVAL_SHIFT 22
+#define E1000_STM_OPCODE 0xDB00
+#define E1000_HICR_FW_RESET 0xC0
+
+#define E1000_SHADOW_RAM_WORDS 2048
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC0
+
+/* EEPROM Read */
+#define E1000_EERD_START 0x00000001 /* Start Read */
+#define E1000_EERD_DONE 0x00000010 /* Read Done */
+#define E1000_EERD_ADDR_SHIFT 8
+#define E1000_EERD_ADDR_MASK 0x0000FF00 /* Read Address */
+#define E1000_EERD_DATA_SHIFT 16
+#define E1000_EERD_DATA_MASK 0xFFFF0000 /* Read Data */
+
+/* SPI EEPROM Status Register */
+#define EEPROM_STATUS_RDY_SPI 0x01
+#define EEPROM_STATUS_WEN_SPI 0x02
+#define EEPROM_STATUS_BP0_SPI 0x04
+#define EEPROM_STATUS_BP1_SPI 0x08
+#define EEPROM_STATUS_WPEN_SPI 0x80
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */
+#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */
+#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
+#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */
+#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */
+#define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* Value of SW Defineable Pin 4 */
+#define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* Value of SW Defineable Pin 5 */
+#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA
+#define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* Value of SW Defineable Pin 6 */
+#define E1000_CTRL_EXT_SDP7_DATA 0x00000080 /* Value of SW Defineable Pin 7 */
+#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */
+#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */
+#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */
+#define E1000_CTRL_EXT_SDP7_DIR 0x00000800 /* Direction of SDP7 0=in 1=out */
+#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
+#define E1000_CTRL_EXT_LINK_MODE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000
+#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000
+#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000
+#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000
+#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* packet buffer parity error detection enabled */
+#define E1000_CTRL_EXT_DF_PAREN 0x02000000 /* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+
+#define INTEL_CE_GBE_MDIC_OP_WRITE 0x04000000
+#define INTEL_CE_GBE_MDIC_OP_READ 0x00000000
+#define INTEL_CE_GBE_MDIC_GO 0x80000000
+#define INTEL_CE_GBE_MDIC_READ_ERROR 0x80000000
+
+#define E1000_KUMCTRLSTA_MASK 0x0000FFFF
+#define E1000_KUMCTRLSTA_OFFSET 0x001F0000
+#define E1000_KUMCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KUMCTRLSTA_REN 0x00200000
+
+#define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL 0x00000000
+#define E1000_KUMCTRLSTA_OFFSET_CTRL 0x00000001
+#define E1000_KUMCTRLSTA_OFFSET_INB_CTRL 0x00000002
+#define E1000_KUMCTRLSTA_OFFSET_DIAG 0x00000003
+#define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS 0x00000004
+#define E1000_KUMCTRLSTA_OFFSET_INB_PARAM 0x00000009
+#define E1000_KUMCTRLSTA_OFFSET_HD_CTRL 0x00000010
+#define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES 0x0000001E
+#define E1000_KUMCTRLSTA_OFFSET_M2P_MODES 0x0000001F
+
+/* FIFO Control */
+#define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS 0x00000008
+#define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS 0x00000800
+
+/* In-Band Control */
+#define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT 0x00000500
+#define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING 0x00000010
+
+/* Half-Duplex Control */
+#define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
+#define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT 0x00000000
+
+#define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL 0x0000001E
+
+#define E1000_KUMCTRLSTA_DIAG_FELPBK 0x2000
+#define E1000_KUMCTRLSTA_DIAG_NELPBK 0x1000
+
+#define E1000_KUMCTRLSTA_K0S_100_EN 0x2000
+#define E1000_KUMCTRLSTA_K0S_GBE_EN 0x1000
+#define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK 0x0003
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+#define E1000_PHY_CTRL_SPD_EN 0x00000001
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+#define E1000_PHY_CTRL_B2B_EN 0x00000080
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00
+#define E1000_LEDCTL_LED1_MODE_SHIFT 8
+#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000
+#define E1000_LEDCTL_LED1_IVRT 0x00004000
+#define E1000_LEDCTL_LED1_BLINK 0x00008000
+#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000
+#define E1000_LEDCTL_LED2_MODE_SHIFT 16
+#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000
+#define E1000_LEDCTL_LED2_IVRT 0x00400000
+#define E1000_LEDCTL_LED2_BLINK 0x00800000
+#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000
+#define E1000_LEDCTL_LED3_MODE_SHIFT 24
+#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000
+#define E1000_LEDCTL_LED3_IVRT 0x40000000
+#define E1000_LEDCTL_LED3_BLINK 0x80000000
+
+#define E1000_LEDCTL_MODE_LINK_10_1000 0x0
+#define E1000_LEDCTL_MODE_LINK_100_1000 0x1
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_ACTIVITY 0x3
+#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
+#define E1000_LEDCTL_MODE_LINK_10 0x5
+#define E1000_LEDCTL_MODE_LINK_100 0x6
+#define E1000_LEDCTL_MODE_LINK_1000 0x7
+#define E1000_LEDCTL_MODE_PCIX_MODE 0x8
+#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9
+#define E1000_LEDCTL_MODE_COLLISION 0xA
+#define E1000_LEDCTL_MODE_BUS_SPEED 0xB
+#define E1000_LEDCTL_MODE_BUS_SIZE 0xC
+#define E1000_LEDCTL_MODE_PAUSED 0xD
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Receive Address */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXO 0x00000040 /* rx overrun */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */
+#define E1000_ICR_RXCFG 0x00000400 /* RX /c/ ordered set */
+#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */
+#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */
+#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */
+#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */
+#define E1000_ICR_TXD_LOW 0x00008000
+#define E1000_ICR_SRPD 0x00010000
+#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */
+#define E1000_ICR_MNG 0x00040000 /* Manageability event */
+#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity error */
+#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */
+#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */
+#define E1000_ICR_DSW 0x00000020 /* FW changed the status of DISSW bit in the FWSM */
+#define E1000_ICR_PHYINT 0x00001000 /* LAN connected device generates an interrupt */
+#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_ICS_SRPD E1000_ICR_SRPD
+#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_ICS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_ICS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_ICS_DSW E1000_ICR_DSW
+#define E1000_ICS_PHYINT E1000_ICR_PHYINT
+#define E1000_ICS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMS_SRPD E1000_ICR_SRPD
+#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMS_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMS_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMS_DSW E1000_ICR_DSW
+#define E1000_IMS_PHYINT E1000_ICR_PHYINT
+#define E1000_IMS_EPRST E1000_ICR_EPRST
+
+/* Interrupt Mask Clear */
+#define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMC_TXQE E1000_ICR_TXQE /* Transmit Queue empty */
+#define E1000_IMC_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMC_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMC_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMC_RXO E1000_ICR_RXO /* rx overrun */
+#define E1000_IMC_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMC_MDAC E1000_ICR_MDAC /* MDIO access complete */
+#define E1000_IMC_RXCFG E1000_ICR_RXCFG /* RX /c/ ordered set */
+#define E1000_IMC_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */
+#define E1000_IMC_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */
+#define E1000_IMC_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */
+#define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */
+#define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW
+#define E1000_IMC_SRPD E1000_ICR_SRPD
+#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */
+#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */
+#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */
+#define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
+#define E1000_IMC_HOST_ARB_PAR E1000_ICR_HOST_ARB_PAR /* host arb read buffer parity error */
+#define E1000_IMC_PB_PAR E1000_ICR_PB_PAR /* packet buffer parity error */
+#define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
+#define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
+#define E1000_IMC_DSW E1000_ICR_DSW
+#define E1000_IMC_PHYINT E1000_ICR_PHYINT
+#define E1000_IMC_EPRST E1000_ICR_EPRST
+
+/* Receive Control */
+#define E1000_RCTL_RST 0x00000001 /* Software reset */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */
+#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */
+#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */
+#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */
+#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */
+
+/* Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SW_W_SYNC definitions */
+#define E1000_SWFW_EEP_SM 0x0001
+#define E1000_SWFW_PHY0_SM 0x0002
+#define E1000_SWFW_PHY1_SM 0x0004
+#define E1000_SWFW_MAC_CSR_SM 0x0008
+
+/* Receive Descriptor */
+#define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */
+#define E1000_RDT_FPDB 0x80000000 /* Flush descriptor block */
+#define E1000_RDLEN_LEN 0x0007ff80 /* descriptor length */
+#define E1000_RDH_RDH 0x0000ffff /* receive descriptor head */
+#define E1000_RDT_RDT 0x0000ffff /* receive descriptor tail */
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Header split receive */
+#define E1000_RFCTL_ISCSI_DIS 0x00000001
+#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define E1000_RFCTL_ISCSI_DWC_SHIFT 1
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_NFS_VER_MASK 0x00000300
+#define E1000_RFCTL_NFS_VER_SHIFT 8
+#define E1000_RFCTL_IPV6_DIS 0x00000400
+#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_ACKD_DIS 0x00002000
+#define E1000_RFCTL_IPFRSP_DIS 0x00004000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Receive Descriptor Control */
+#define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
+#define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
+#define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
+#define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc.
+ still to be processed. */
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */
+#define E1000_TXCW_NP 0x00008000 /* TXCW next page */
+#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */
+#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_CC 0x10000000 /* Receive config change */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */
+
+/* Transmit Control */
+#define E1000_TCTL_RST 0x00000001 /* software reset */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_BCE 0x00000004 /* busy check enable */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */
+#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+/* Extended Transmit Control */
+#define E1000_TCTL_EXT_BST_MASK 0x000003FF /* Backoff Slot Time */
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Multiple Receive Queue Control */
+#define E1000_MRQC_ENABLE_MASK 0x00000003
+#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001
+#define E1000_MRQC_ENABLE_RSS_INT 0x00000004
+#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */
+#define E1000_WUC_SPM 0x80000000 /* Enable SPM */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define E1000_WUFC_ALL_FILTERS 0x000F00FF /* Mask for all wakeup filters */
+#define E1000_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+#define E1000_WUFC_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC 0x00000001 /* Link Status Changed */
+#define E1000_WUS_MAG 0x00000002 /* Magic Packet Received */
+#define E1000_WUS_EX 0x00000004 /* Directed Exact Received */
+#define E1000_WUS_MC 0x00000008 /* Directed Multicast Received */
+#define E1000_WUS_BC 0x00000010 /* Broadcast Received */
+#define E1000_WUS_ARP 0x00000020 /* ARP Request Packet Received */
+#define E1000_WUS_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Received */
+#define E1000_WUS_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Received */
+#define E1000_WUS_FLX0 0x00010000 /* Flexible Filter 0 Match */
+#define E1000_WUS_FLX1 0x00020000 /* Flexible Filter 1 Match */
+#define E1000_WUS_FLX2 0x00040000 /* Flexible Filter 2 Match */
+#define E1000_WUS_FLX3 0x00080000 /* Flexible Filter 3 Match */
+#define E1000_WUS_FLX_FILTERS 0x000F0000 /* Mask for the 4 flexible filters */
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */
+#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */
+#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */
+#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */
+#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */
+#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery
+ * Filtering */
+#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */
+#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */
+#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address
+ * filtering */
+#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host
+ * memory */
+#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address
+ * filtering */
+#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */
+#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */
+#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */
+#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */
+#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */
+#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */
+#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */
+#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */
+
+#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */
+#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+/* FW Semaphore Register */
+#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */
+#define E1000_FWSM_MODE_SHIFT 1
+#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */
+
+#define E1000_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI reset */
+#define E1000_FWSM_DISSW 0x10000000 /* FW disable SW Write Access */
+#define E1000_FWSM_SKUSEL_MASK 0x60000000 /* LAN SKU select */
+#define E1000_FWSM_SKUEL_SHIFT 29
+#define E1000_FWSM_SKUSEL_EMB 0x0 /* Embedded SKU */
+#define E1000_FWSM_SKUSEL_CONS 0x1 /* Consumer SKU */
+#define E1000_FWSM_SKUSEL_PERF_100 0x2 /* Perf & Corp 10/100 SKU */
+#define E1000_FWSM_SKUSEL_PERF_GBE 0x3 /* Perf & Copr GbE SKU */
+
+/* FFLT Debug Register */
+#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */
+
+typedef enum {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_interface_only
+} e1000_mng_mode;
+
+/* Host Interface Control Register */
+#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */
+#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done
+ * to put command in RAM */
+#define E1000_HICR_SV 0x00000004 /* Status Validity */
+#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */
+
+/* Host Interface Command Interface - Address range 0x8800-0x8EFF */
+#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */
+#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */
+#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */
+#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */
+
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options; /* I/F bits for command, status for return */
+ u8 checksum;
+};
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */
+};
+
+/* Host SMB register #0 */
+#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */
+#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */
+#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */
+#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */
+
+/* Host SMB register #1 */
+#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN
+#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN
+#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT
+#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT
+
+/* FW Status Register */
+#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */
+
+/* Wake Up Packet Length */
+#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */
+
+#define E1000_MDALIGN 4096
+
+/* PCI-Ex registers*/
+
+/* PCI-Ex Control Register */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+#define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+/* Function Active and Power State to MNG */
+#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003
+#define E1000_FACTPS_LAN0_VALID 0x00000004
+#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008
+#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0
+#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6
+#define E1000_FACTPS_LAN1_VALID 0x00000100
+#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200
+#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000
+#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12
+#define E1000_FACTPS_IDE_ENABLE 0x00004000
+#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000
+#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000
+#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18
+#define E1000_FACTPS_SP_ENABLE 0x00100000
+#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000
+#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000
+#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24
+#define E1000_FACTPS_IPMI_ENABLE 0x04000000
+#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000
+#define E1000_FACTPS_MNGCG 0x20000000
+#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000
+#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000
+
+/* PCI-Ex Config Space */
+#define PCI_EX_LINK_STATUS 0x12
+#define PCI_EX_LINK_WIDTH_MASK 0x3F0
+#define PCI_EX_LINK_WIDTH_SHIFT 4
+
+/* EEPROM Commands - Microwire */
+#define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE_MICROWIRE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE_MICROWIRE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE_MICROWIRE 0x10 /* EEPROM erase/write disable */
+
+/* EEPROM Commands - SPI */
+#define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */
+#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */
+#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */
+#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */
+#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Size definitions */
+#define EEPROM_WORD_SIZE_SHIFT 6
+#define EEPROM_SIZE_SHIFT 10
+#define EEPROM_SIZE_MASK 0x1C00
+
+/* EEPROM Word Offsets */
+#define EEPROM_COMPAT 0x0003
+#define EEPROM_ID_LED_SETTINGS 0x0004
+#define EEPROM_VERSION 0x0005
+#define EEPROM_SERDES_AMPLITUDE 0x0006 /* For SERDES output amplitude adjustment. */
+#define EEPROM_PHY_CLASS_WORD 0x0007
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
+#define EEPROM_INIT_CONTROL3_PORT_B 0x0014
+#define EEPROM_INIT_3GIO_3 0x001A
+#define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
+#define EEPROM_INIT_CONTROL3_PORT_A 0x0024
+#define EEPROM_CFG 0x0012
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+#define E1000_EEPROM_CFG_DONE 0x00040000 /* MNG config cycle done */
+#define E1000_EEPROM_CFG_DONE_PORT_1 0x00080000 /* ...for second port */
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
+#define EEPROM_SERDES_AMPLITUDE_MASK 0x000F
+
+/* Mask bit for PHY class in Word 7 of the EEPROM */
+#define EEPROM_PHY_CLASS_A 0x8000
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+#define EEPROM_WORD0A_ILOS 0x0010
+#define EEPROM_WORD0A_SWDPIO 0x01E0
+#define EEPROM_WORD0A_LRST 0x0200
+#define EEPROM_WORD0A_FD 0x0400
+#define EEPROM_WORD0A_66MHZ 0x0800
+
+/* Mask bits for fields in Word 0x0f of the EEPROM */
+#define EEPROM_WORD0F_PAUSE_MASK 0x3000
+#define EEPROM_WORD0F_PAUSE 0x1000
+#define EEPROM_WORD0F_ASM_DIR 0x2000
+#define EEPROM_WORD0F_ANE 0x0800
+#define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
+#define EEPROM_WORD0F_LPLU 0x0001
+
+/* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
+#define EEPROM_WORD1020_GIGA_DISABLE 0x0010
+#define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
+
+/* Mask bits for fields in Word 0x1a of the EEPROM */
+#define EEPROM_WORD1A_ASPM_MASK 0x000C
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+#define EEPROM_NODE_ADDRESS_BYTE_0 0
+#define EEPROM_PBA_BYTE_1 8
+
+#define EEPROM_RESERVED_WORD 0xFFFF
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+/* Collision distance is a 0-based value that applies to
+ * half-duplex-capable hardware only. */
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLLISION_DISTANCE_82542 64
+#define E1000_FDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_HDX_COLLISION_DISTANCE E1000_COLLISION_DISTANCE
+#define E1000_COLD_SHIFT 12
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82542_TIPG_IPGT 10
+#define DEFAULT_82543_TIPG_IPGT_FIBER 9
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+#define E1000_TIPG_IPGR1_MASK 0x000FFC00
+#define E1000_TIPG_IPGR2_MASK 0x3FF00000
+
+#define DEFAULT_82542_TIPG_IPGR1 2
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82542_TIPG_IPGR2 10
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define E1000_TXDMAC_DPP 0x00000001
+
+/* Adaptive IFS defines */
+#define TX_THRESHOLD_START 8
+#define TX_THRESHOLD_INCREMENT 10
+#define TX_THRESHOLD_DECREMENT 1
+#define TX_THRESHOLD_STOP 190
+#define TX_THRESHOLD_DISABLE 0
+#define TX_THRESHOLD_TIMER_MS 10000
+#define MIN_NUM_XMITS 1000
+#define IFS_MAX 80
+#define IFS_STEP 10
+#define IFS_MIN 40
+#define IFS_RATIO 4
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002
+#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004
+#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008
+#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x0FFF0000
+
+#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF
+#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB, default Rx allocation */
+#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */
+#define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */
+#define E1000_PBA_20K 0x0014
+#define E1000_PBA_22K 0x0016
+#define E1000_PBA_24K 0x0018
+#define E1000_PBA_30K 0x001E
+#define E1000_PBA_32K 0x0020
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_38K 0x0026
+#define E1000_PBA_40K 0x0028
+#define E1000_PBA_48K 0x0030 /* 48KB, default RX allocation */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* PCIX Config space */
+#define PCIX_COMMAND_REGISTER 0xE6
+#define PCIX_STATUS_REGISTER_LO 0xE8
+#define PCIX_STATUS_REGISTER_HI 0xEA
+
+#define PCIX_COMMAND_MMRBC_MASK 0x000C
+#define PCIX_COMMAND_MMRBC_SHIFT 0x2
+#define PCIX_STATUS_HI_MMRBC_MASK 0x0060
+#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5
+#define PCIX_STATUS_HI_MMRBC_4K 0x3
+#define PCIX_STATUS_HI_MMRBC_2K 0x2
+
+/* Number of bits required to shift right the "pause" bits from the
+ * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
+ */
+#define PAUSE_SHIFT 5
+
+/* Number of bits required to shift left the "SWDPIO" bits from the
+ * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
+ */
+#define SWDPIO_SHIFT 17
+
+/* Number of bits required to shift left the "SWDPIO_EXT" bits from the
+ * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
+ */
+#define SWDPIO__EXT_SHIFT 4
+
+/* Number of bits required to shift left the "ILOS" bit from the EEPROM
+ * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
+ */
+#define ILOS_SHIFT 3
+
+#define RECEIVE_BUFFER_ALIGN_SIZE (256)
+
+/* Number of milliseconds we wait for auto-negotiation to complete */
+#define LINK_UP_TIMEOUT 500
+
+/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
+#define AUTO_READ_DONE_TIMEOUT 10
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+
+#define E1000_TX_BUFFER_SIZE ((u32)1514)
+
+/* The carrier extension symbol, as received by the NIC. */
+#define CARRIER_EXTENSION 0x0F
+
+/* TBI_ACCEPT macro definition:
+ *
+ * This macro requires:
+ * adapter = a pointer to struct e1000_hw
+ * status = the 8 bit status field of the RX descriptor with EOP set
+ * error = the 8 bit error field of the RX descriptor with EOP set
+ * length = the sum of all the length fields of the RX descriptors that
+ * make up the current frame
+ * last_byte = the last byte of the frame DMAed by the hardware
+ * max_frame_length = the maximum frame length we want to accept.
+ * min_frame_length = the minimum frame length we want to accept.
+ *
+ * This macro is a conditional that should be used in the interrupt
+ * handler's Rx processing routine when RxErrors have been detected.
+ *
+ * Typical use:
+ * ...
+ * if (TBI_ACCEPT) {
+ * accept_frame = true;
+ * e1000_tbi_adjust_stats(adapter, MacAddress);
+ * frame_length--;
+ * } else {
+ * accept_frame = false;
+ * }
+ * ...
+ */
+
+#define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
+ ((adapter)->tbi_compatibility_on && \
+ (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
+ ((last_byte) == CARRIER_EXTENSION) && \
+ (((status) & E1000_RXD_STAT_VP) ? \
+ (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
+ ((length) <= ((adapter)->max_frame_size + 1))) : \
+ (((length) > (adapter)->min_frame_size) && \
+ ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
+
+/* Structures, enums, and macros for the PHY */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0
+#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0
+#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2
+#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2
+#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3
+#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3
+#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
+#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CTRL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */
+#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF /* Registers equal on all pages */
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Register */
+#define M88E1000_INT_STATUS 0x13 /* Interrupt Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */
+
+#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */
+#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */
+
+#define IGP01E1000_IEEE_REGS_PAGE 0x0000
+#define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
+#define IGP01E1000_IEEE_FORCE_GIGA 0x0140
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* PHY Specific Control Register */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
+#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */
+#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */
+#define IGP02E1000_PHY_POWER_MGMT 0x19
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */
+
+/* IGP01E1000 AGC Registers - stores the cable length values*/
+#define IGP01E1000_PHY_AGC_A 0x1172
+#define IGP01E1000_PHY_AGC_B 0x1272
+#define IGP01E1000_PHY_AGC_C 0x1472
+#define IGP01E1000_PHY_AGC_D 0x1872
+
+/* IGP02E1000 AGC Registers for cable length values */
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+/* IGP01E1000 DSP Reset Register */
+#define IGP01E1000_PHY_DSP_RESET 0x1F33
+#define IGP01E1000_PHY_DSP_SET 0x1F71
+#define IGP01E1000_PHY_DSP_FFE 0x1F35
+
+#define IGP01E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+
+#define IGP01E1000_PHY_AGC_PARAM_A 0x1171
+#define IGP01E1000_PHY_AGC_PARAM_B 0x1271
+#define IGP01E1000_PHY_AGC_PARAM_C 0x1471
+#define IGP01E1000_PHY_AGC_PARAM_D 0x1871
+
+#define IGP01E1000_PHY_EDAC_MU_INDEX 0xC000
+#define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
+
+#define IGP01E1000_PHY_ANALOG_TX_STATE 0x2890
+#define IGP01E1000_PHY_ANALOG_CLASS_A 0x2000
+#define IGP01E1000_PHY_FORCE_ANALOG_ENABLE 0x0004
+#define IGP01E1000_PHY_DSP_FFE_CM_CP 0x0069
+
+#define IGP01E1000_PHY_DSP_FFE_DEFAULT 0x002A
+/* IGP01E1000 PCS Initialization register - stores the polarity status when
+ * speed = 1000 Mbps. */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_PCS_CTRL_REG 0x00B5
+
+#define IGP01E1000_ANALOG_REGS_PAGE 0x20C0
+
+/* PHY Control Register */
+#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+
+/* PHY Status Register */
+#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */
+#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */
+#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
+#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */
+#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */
+#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */
+#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */
+#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */
+#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */
+#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */
+#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */
+#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
+#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */
+#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */
+#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */
+#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */
+#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */
+#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */
+#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */
+#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */
+#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */
+#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */
+
+/* Next Page TX Register */
+#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* Link Partner Next Page Register */
+#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */
+#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges
+ * of different NP
+ */
+#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg
+ * 0 = cannot comply with msg
+ */
+#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */
+#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */
+#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow
+ * 0 = sending last NP
+ */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */
+#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */
+#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */
+#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */
+#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */
+#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */
+#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */
+#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */
+#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */
+#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12
+#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13
+#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20
+#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100
+
+/* Extended Status Register */
+#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */
+#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */
+#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */
+#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */
+
+#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */
+#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */
+
+#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */
+ /* (0=enable, 1=disable) */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */
+#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* 1=CLK125 low,
+ * 0=CLK125 toggling
+ */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* 1000BASE-T: Auto crossover,
+ * 100BASE-TX/10BASE-T:
+ * MDI Mode
+ */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* Auto crossover enabled
+ * all speeds.
+ */
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
+ /* 1=Enable Extended 10BASE-T distance
+ * (Lower 10BASE-T RX Threshold)
+ * 0=Normal 10BASE-T RX Threshold */
+#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100
+ /* 1=5-Bit interface in 100BASE-TX
+ * 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */
+#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+#define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT 1
+#define M88E1000_PSCR_AUTO_X_MODE_SHIFT 5
+#define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380 /* 0=<50M;1=50-80M;2=80-110M;
+ * 3=110-140M;4=>140M */
+#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */
+#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */
+#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */
+#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */
+#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_REV_POLARITY_SHIFT 1
+#define M88E1000_PSSR_DOWNSHIFT_SHIFT 5
+#define M88E1000_PSSR_MDIX_SHIFT 6
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */
+#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* 1=Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00
+/* Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300
+#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00
+
+/* IGP01E1000 Specific Port Config Register - R/W */
+#define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT 0x0010
+#define IGP01E1000_PSCFR_PRE_EN 0x0020
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+#define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK 0x0100
+#define IGP01E1000_PSCFR_DISABLE_JABBER 0x0400
+#define IGP01E1000_PSCFR_DISABLE_TRANSMIT 0x2000
+
+/* IGP01E1000 Specific Port Status Register - R/O */
+#define IGP01E1000_PSSR_AUTONEG_FAILED 0x0001 /* RO LH SC */
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_CABLE_LENGTH 0x007C
+#define IGP01E1000_PSSR_FULL_DUPLEX 0x0200
+#define IGP01E1000_PSSR_LINK_UP 0x0400
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000 /* speed bits mask */
+#define IGP01E1000_PSSR_SPEED_10MBPS 0x4000
+#define IGP01E1000_PSSR_SPEED_100MBPS 0x8000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT 0x0002 /* shift right 2 */
+#define IGP01E1000_PSSR_MDIX_SHIFT 0x000B /* shift right 11 */
+
+/* IGP01E1000 Specific Port Control Register - R/W */
+#define IGP01E1000_PSCR_TP_LOOPBACK 0x0010
+#define IGP01E1000_PSCR_CORRECT_NC_SCMBLR 0x0200
+#define IGP01E1000_PSCR_TEN_CRS_SELECT 0x0400
+#define IGP01E1000_PSCR_FLIP_CHIP 0x0800
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0-MDI, 1-MDIX */
+
+/* IGP01E1000 Specific Port Link Health Register */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR 0x4000
+#define IGP01E1000_PLHR_MASTER_FAULT 0x2000
+#define IGP01E1000_PLHR_MASTER_RESOLUTION 0x1000
+#define IGP01E1000_PLHR_GIG_REM_RCVR_NOK 0x0800 /* LH */
+#define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW 0x0400 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_1 0x0200 /* LH */
+#define IGP01E1000_PLHR_DATA_ERR_0 0x0100
+#define IGP01E1000_PLHR_AUTONEG_FAULT 0x0040
+#define IGP01E1000_PLHR_AUTONEG_ACTIVE 0x0010
+#define IGP01E1000_PLHR_VALID_CHANNEL_D 0x0008
+#define IGP01E1000_PLHR_VALID_CHANNEL_C 0x0004
+#define IGP01E1000_PLHR_VALID_CHANNEL_B 0x0002
+#define IGP01E1000_PLHR_VALID_CHANNEL_A 0x0001
+
+/* IGP01E1000 Channel Quality Register */
+#define IGP01E1000_MSE_CHANNEL_D 0x000F
+#define IGP01E1000_MSE_CHANNEL_C 0x00F0
+#define IGP01E1000_MSE_CHANNEL_B 0x0F00
+#define IGP01E1000_MSE_CHANNEL_A 0xF000
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */
+
+/* IGP01E1000 DSP reset macros */
+#define DSP_RESET_ENABLE 0x0
+#define DSP_RESET_DISABLE 0x2
+#define E1000_MAX_DSP_RESETS 10
+
+/* IGP01E1000 & IGP02E1000 AGC Registers */
+
+#define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */
+
+/* IGP02E1000 AGC Register Length 9-bit mask */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+
+/* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
+#define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
+#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
+
+/* The precision error of the cable length is +/- 10 meters */
+#define IGP01E1000_AGC_RANGE 10
+#define IGP02E1000_AGC_RANGE 15
+
+/* IGP01E1000 PCS Initialization register */
+/* bits 3:6 in the PCS registers stores the channels polarity */
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+/* IGP01E1000 GMII FIFO Register */
+#define IGP01E1000_GMII_FLEX_SPD 0x10 /* Enable flexible speed
+ * on Link-Up */
+#define IGP01E1000_GMII_SPD 0x20 /* Enable SPD */
+
+/* IGP01E1000 Analog Register */
+#define IGP01E1000_ANALOG_SPARE_FUSE_STATUS 0x20D1
+#define IGP01E1000_ANALOG_FUSE_STATUS 0x20D0
+#define IGP01E1000_ANALOG_FUSE_CONTROL 0x20DC
+#define IGP01E1000_ANALOG_FUSE_BYPASS 0x20DE
+
+#define IGP01E1000_ANALOG_FUSE_POLY_MASK 0xF000
+#define IGP01E1000_ANALOG_FUSE_FINE_MASK 0x0F80
+#define IGP01E1000_ANALOG_FUSE_COARSE_MASK 0x0070
+#define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED 0x0100
+#define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL 0x0002
+
+#define IGP01E1000_ANALOG_FUSE_COARSE_THRESH 0x0040
+#define IGP01E1000_ANALOG_FUSE_COARSE_10 0x0010
+#define IGP01E1000_ANALOG_FUSE_FINE_1 0x0080
+#define IGP01E1000_ANALOG_FUSE_FINE_10 0x0500
+
+/* Bit definitions for valid PHY IDs. */
+/* I = Integrated
+ * E = External
+ */
+#define M88_VENDOR 0x0141
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
+#define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
+#define M88E1011_I_REV_4 0x04
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define M88E1118_E_PHY_ID 0x01410E40
+#define L1LXT971A_PHY_ID 0x001378E0
+
+#define RTL8211B_PHY_ID 0x001CC910
+#define RTL8201N_PHY_ID 0x8200
+#define RTL_PHY_CTRL_FD 0x0100 /* Full duplex.0=half; 1=full */
+#define RTL_PHY_CTRL_SPD_100 0x200000 /* Force 100Mb */
+
+/* Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) \
+ (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+
+#define IGP3_PHY_PORT_CTRL \
+ PHY_REG(769, 17) /* Port General Configuration */
+#define IGP3_PHY_RATE_ADAPT_CTRL \
+ PHY_REG(769, 25) /* Rate Adapter Control Register */
+
+#define IGP3_KMRN_FIFO_CTRL_STATS \
+ PHY_REG(770, 16) /* KMRN FIFO's control/status register */
+#define IGP3_KMRN_POWER_MNG_CTRL \
+ PHY_REG(770, 17) /* KMRN Power Management Control Register */
+#define IGP3_KMRN_INBAND_CTRL \
+ PHY_REG(770, 18) /* KMRN Inband Control Register */
+#define IGP3_KMRN_DIAG \
+ PHY_REG(770, 19) /* KMRN Diagnostic register */
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002 /* RX PCS is not synced */
+#define IGP3_KMRN_ACK_TIMEOUT \
+ PHY_REG(770, 20) /* KMRN Acknowledge Timeouts register */
+
+#define IGP3_VR_CTRL \
+ PHY_REG(776, 18) /* Voltage regulator control register */
+#define IGP3_VR_CTRL_MODE_SHUT 0x0200 /* Enter powerdown, shutdown VRs */
+#define IGP3_VR_CTRL_MODE_MASK 0x0300 /* Shutdown VR Mask */
+
+#define IGP3_CAPABILITY \
+ PHY_REG(776, 19) /* IGP3 Capability Register */
+
+/* Capabilities for SKU Control */
+#define IGP3_CAP_INITIATE_TEAM 0x0001 /* Able to initiate a team */
+#define IGP3_CAP_WFM 0x0002 /* Support WoL and PXE */
+#define IGP3_CAP_ASF 0x0004 /* Support ASF */
+#define IGP3_CAP_LPLU 0x0008 /* Support Low Power Link Up */
+#define IGP3_CAP_DC_AUTO_SPEED 0x0010 /* Support AC/DC Auto Link Speed */
+#define IGP3_CAP_SPD 0x0020 /* Support Smart Power Down */
+#define IGP3_CAP_MULT_QUEUE 0x0040 /* Support 2 tx & 2 rx queues */
+#define IGP3_CAP_RSS 0x0080 /* Support RSS */
+#define IGP3_CAP_8021PQ 0x0100 /* Support 802.1Q & 802.1p */
+#define IGP3_CAP_AMT_CB 0x0200 /* Support active manageability and circuit breaker */
+
+#define IGP3_PPC_JORDAN_EN 0x0001
+#define IGP3_PPC_JORDAN_GIGA_SPEED 0x0002
+
+#define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS 0x0001
+#define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK 0x001E
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA 0x0020
+#define IGP3_KMRN_PMC_K0S_MODE1_EN_100 0x0040
+
+#define IGP3E1000_PHY_MISC_CTRL 0x1B /* Misc. Ctrl register */
+#define IGP3_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Duplex Manual Set */
+
+#define IGP3_KMRN_EXT_CTRL PHY_REG(770, 18)
+#define IGP3_KMRN_EC_DIS_INBAND 0x0080
+
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330 /* 10/100 PHY */
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 /* 100BaseTx Extended Status, Control and Address */
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY special control register */
+#define IFE_PHY_RCV_FALSE_CARRIER 0x13 /* 100BaseTx Receive False Carrier Counter */
+#define IFE_PHY_RCV_DISCONNECT 0x14 /* 100BaseTx Receive Disconnect Counter */
+#define IFE_PHY_RCV_ERROT_FRAME 0x15 /* 100BaseTx Receive Error Frame Counter */
+#define IFE_PHY_RCV_SYMBOL_ERR 0x16 /* Receive Symbol Error Counter */
+#define IFE_PHY_PREM_EOF_ERR 0x17 /* 100BaseTx Receive Premature End Of Frame Error Counter */
+#define IFE_PHY_RCV_EOF_ERR 0x18 /* 10BaseT Receive End Of Frame Error Counter */
+#define IFE_PHY_TX_JABBER_DETECT 0x19 /* 10BaseT Transmit Jabber Detect Counter */
+#define IFE_PHY_EQUALIZER 0x1A /* PHY Equalizer Control and Status */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY special control and LED configuration */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control register */
+#define IFE_PHY_HWI_CONTROL 0x1D /* Hardware Integrity Control (HWI) */
+
+#define IFE_PESC_REDUCED_POWER_DOWN_DISABLE 0x2000 /* Default 1 = Disable auto reduced power down */
+#define IFE_PESC_100BTX_POWER_DOWN 0x0400 /* Indicates the power state of 100BASE-TX */
+#define IFE_PESC_10BTX_POWER_DOWN 0x0200 /* Indicates the power state of 10BASE-T */
+#define IFE_PESC_POLARITY_REVERSED 0x0100 /* Indicates 10BASE-T polarity */
+#define IFE_PESC_PHY_ADDR_MASK 0x007C /* Bit 6:2 for sampled PHY address */
+#define IFE_PESC_SPEED 0x0002 /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
+#define IFE_PESC_DUPLEX 0x0001 /* Auto-negotiation duplex result 1=Full, 0=Half */
+#define IFE_PESC_POLARITY_REVERSED_SHIFT 8
+
+#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* 1 = Dynamic Power Down disabled */
+#define IFE_PSC_FORCE_POLARITY 0x0020 /* 1=Reversed Polarity, 0=Normal */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 /* 1=Auto Polarity Disabled, 0=Enabled */
+#define IFE_PSC_JABBER_FUNC_DISABLE 0x0001 /* 1=Jabber Disabled, 0=Normal Jabber Operation */
+#define IFE_PSC_FORCE_POLARITY_SHIFT 5
+#define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT 4
+
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable MDI/MDI-X feature, default 0=disabled */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDIX-X, 0=force MDI */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_AUTO_MDIX_COMPLETE 0x0010 /* Resolution algorithm is completed */
+#define IFE_PMC_MDIX_MODE_SHIFT 6
+#define IFE_PHC_MDIX_RESET_ALL_MASK 0x0000 /* Disable auto MDI-X */
+
+#define IFE_PHC_HWI_ENABLE 0x8000 /* Enable the HWI feature */
+#define IFE_PHC_ABILITY_CHECK 0x4000 /* 1= Test Passed, 0=failed */
+#define IFE_PHC_TEST_EXEC 0x2000 /* PHY launch test pulses on the wire */
+#define IFE_PHC_HIGHZ 0x0200 /* 1 = Open Circuit */
+#define IFE_PHC_LOWZ 0x0400 /* 1 = Short Circuit */
+#define IFE_PHC_LOW_HIGH_Z_MASK 0x0600 /* Mask for indication type of problem on the line */
+#define IFE_PHC_DISTANCE_MASK 0x01FF /* Mask for distance to the cable problem, in 80cm granularity */
+#define IFE_PHC_RESET_ALL_MASK 0x0000 /* Disable HWI */
+#define IFE_PSCL_PROBE_MODE 0x0020 /* LED Probe mode */
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+#define ICH_FLASH_COMMAND_TIMEOUT 5000 /* 5000 uSecs - adjusted */
+#define ICH_FLASH_ERASE_TIMEOUT 3000000 /* Up to 3 seconds - worst case */
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10 /* 10 cycles */
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+#define ICH_CYCLE_READ 0x0
+#define ICH_CYCLE_RESERVED 0x1
+#define ICH_CYCLE_WRITE 0x2
+#define ICH_CYCLE_ERASE 0x3
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_FRACC 0x0050
+#define ICH_FLASH_FREG0 0x0054
+#define ICH_FLASH_FREG1 0x0058
+#define ICH_FLASH_FREG2 0x005C
+#define ICH_FLASH_FREG3 0x0060
+#define ICH_FLASH_FPR0 0x0074
+#define ICH_FLASH_FPR1 0x0078
+#define ICH_FLASH_SSFSTS 0x0090
+#define ICH_FLASH_SSFCTL 0x0092
+#define ICH_FLASH_PREOP 0x0094
+#define ICH_FLASH_OPTYPE 0x0096
+#define ICH_FLASH_OPMENU 0x0098
+
+#define ICH_FLASH_REG_MAPSIZE 0x00A0
+#define ICH_FLASH_SECTOR_SIZE 4096
+#define ICH_GFPREG_BASE_MASK 0x1FFF
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+
+/* Miscellaneous PHY bit definitions. */
+#define PHY_PREAMBLE 0xFFFFFFFF
+#define PHY_SOF 0x01
+#define PHY_OP_READ 0x02
+#define PHY_OP_WRITE 0x01
+#define PHY_TURNAROUND 0x02
+#define PHY_PREAMBLE_SIZE 32
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+#define E1000_PHY_ADDRESS 0x01
+#define PHY_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+#define PHY_FORCE_TIME 20 /* 2.0 Seconds */
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define DEVICE_SPEED_MASK 0x00000300 /* Device Ctrl Reg Speed Mask */
+#define REG4_SPEED_MASK 0x01E0
+#define REG9_SPEED_MASK 0x0300
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010
+#define ADVERTISE_1000_FULL 0x0020
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* Everything but 1000-Half */
+#define AUTONEG_ADVERTISE_10_100_ALL 0x000F /* All 10/100 speeds */
+#define AUTONEG_ADVERTISE_10_ALL 0x0003 /* 10Mbps Full & Half speeds */
+
+#endif /* _E1000_HW_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+#include <net/ip6_checksum.h>
+#include <linux/io.h>
+#include <linux/prefetch.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+
+/* Intel Media SOC GbE MDIO physical base address */
+static unsigned long ce4100_gbe_mdio_base_phy;
+/* Intel Media SOC GbE MDIO virtual base address */
+void __iomem *ce4100_gbe_mdio_base_virt;
+
+char e1000_driver_name[] = "e1000";
+static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
+#define DRV_VERSION "7.3.21-k8-NAPI"
+const char e1000_driver_version[] = DRV_VERSION;
+static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
+
+/* e1000_pci_tbl - PCI Device ID Table
+ *
+ * Last entry must be all 0s
+ *
+ * Macro expands to...
+ * {PCI_DEVICE(PCI_VENDOR_ID_INTEL, device_id)}
+ */
+static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
+ INTEL_E1000_ETHERNET_DEVICE(0x1000),
+ INTEL_E1000_ETHERNET_DEVICE(0x1001),
+ INTEL_E1000_ETHERNET_DEVICE(0x1004),
+ INTEL_E1000_ETHERNET_DEVICE(0x1008),
+ INTEL_E1000_ETHERNET_DEVICE(0x1009),
+ INTEL_E1000_ETHERNET_DEVICE(0x100C),
+ INTEL_E1000_ETHERNET_DEVICE(0x100D),
+ INTEL_E1000_ETHERNET_DEVICE(0x100E),
+ INTEL_E1000_ETHERNET_DEVICE(0x100F),
+ INTEL_E1000_ETHERNET_DEVICE(0x1010),
+ INTEL_E1000_ETHERNET_DEVICE(0x1011),
+ INTEL_E1000_ETHERNET_DEVICE(0x1012),
+ INTEL_E1000_ETHERNET_DEVICE(0x1013),
+ INTEL_E1000_ETHERNET_DEVICE(0x1014),
+ INTEL_E1000_ETHERNET_DEVICE(0x1015),
+ INTEL_E1000_ETHERNET_DEVICE(0x1016),
+ INTEL_E1000_ETHERNET_DEVICE(0x1017),
+ INTEL_E1000_ETHERNET_DEVICE(0x1018),
+ INTEL_E1000_ETHERNET_DEVICE(0x1019),
+ INTEL_E1000_ETHERNET_DEVICE(0x101A),
+ INTEL_E1000_ETHERNET_DEVICE(0x101D),
+ INTEL_E1000_ETHERNET_DEVICE(0x101E),
+ INTEL_E1000_ETHERNET_DEVICE(0x1026),
+ INTEL_E1000_ETHERNET_DEVICE(0x1027),
+ INTEL_E1000_ETHERNET_DEVICE(0x1028),
+ INTEL_E1000_ETHERNET_DEVICE(0x1075),
+ INTEL_E1000_ETHERNET_DEVICE(0x1076),
+ INTEL_E1000_ETHERNET_DEVICE(0x1077),
+ INTEL_E1000_ETHERNET_DEVICE(0x1078),
+ INTEL_E1000_ETHERNET_DEVICE(0x1079),
+ INTEL_E1000_ETHERNET_DEVICE(0x107A),
+ INTEL_E1000_ETHERNET_DEVICE(0x107B),
+ INTEL_E1000_ETHERNET_DEVICE(0x107C),
+ INTEL_E1000_ETHERNET_DEVICE(0x108A),
+ INTEL_E1000_ETHERNET_DEVICE(0x1099),
+ INTEL_E1000_ETHERNET_DEVICE(0x10B5),
+ INTEL_E1000_ETHERNET_DEVICE(0x2E6E),
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+int e1000_up(struct e1000_adapter *adapter);
+void e1000_down(struct e1000_adapter *adapter);
+void e1000_reinit_locked(struct e1000_adapter *adapter);
+void e1000_reset(struct e1000_adapter *adapter);
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter);
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter);
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter);
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr);
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr);
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+void e1000_update_stats(struct e1000_adapter *adapter);
+
+static int e1000_init_module(void);
+static void e1000_exit_module(void);
+static int e1000_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit e1000_remove(struct pci_dev *pdev);
+static int e1000_alloc_queues(struct e1000_adapter *adapter);
+static int e1000_sw_init(struct e1000_adapter *adapter);
+static int e1000_open(struct net_device *netdev);
+static int e1000_close(struct net_device *netdev);
+static void e1000_configure_tx(struct e1000_adapter *adapter);
+static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_setup_rctl(struct e1000_adapter *adapter);
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring);
+static void e1000_set_rx_mode(struct net_device *netdev);
+static void e1000_update_phy_info(unsigned long data);
+static void e1000_update_phy_info_task(struct work_struct *work);
+static void e1000_watchdog(unsigned long data);
+static void e1000_82547_tx_fifo_stall(unsigned long data);
+static void e1000_82547_tx_fifo_stall_task(struct work_struct *work);
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
+static struct net_device_stats * e1000_get_stats(struct net_device *netdev);
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu);
+static int e1000_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t e1000_intr(int irq, void *data);
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring);
+static int e1000_clean(struct napi_struct *napi, int budget);
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do);
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count);
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd);
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd);
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter);
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter);
+static void e1000_tx_timeout(struct net_device *dev);
+static void e1000_reset_task(struct work_struct *work);
+static void e1000_smartspeed(struct e1000_adapter *adapter);
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb);
+
+static bool e1000_vlan_used(struct e1000_adapter *adapter);
+static void e1000_vlan_mode(struct net_device *netdev, u32 features);
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void e1000_restore_vlan(struct e1000_adapter *adapter);
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state);
+static int e1000_resume(struct pci_dev *pdev);
+#endif
+static void e1000_shutdown(struct pci_dev *pdev);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void e1000_netpoll (struct net_device *netdev);
+#endif
+
+#define COPYBREAK_DEFAULT 256
+static unsigned int copybreak __read_mostly = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state);
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev);
+static void e1000_io_resume(struct pci_dev *pdev);
+
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static struct pci_driver e1000_driver = {
+ .name = e1000_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ /* Power Management Hooks */
+ .suspend = e1000_suspend,
+ .resume = e1000_resume,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+static int debug = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * e1000_get_hw_dev - return device
+ * used by hardware layer to print debugging information
+ *
+ **/
+struct net_device *e1000_get_hw_dev(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init e1000_init_module(void)
+{
+ int ret;
+ pr_info("%s - version %s\n", e1000_driver_string, e1000_driver_version);
+
+ pr_info("%s\n", e1000_copyright);
+
+ ret = pci_register_driver(&e1000_driver);
+ if (copybreak != COPYBREAK_DEFAULT) {
+ if (copybreak == 0)
+ pr_info("copybreak disabled\n");
+ else
+ pr_info("copybreak enabled for "
+ "packets <= %u bytes\n", copybreak);
+ }
+ return ret;
+}
+
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+
+module_exit(e1000_exit_module);
+
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irq_handler_t handler = e1000_intr;
+ int irq_flags = IRQF_SHARED;
+ int err;
+
+ err = request_irq(adapter->pdev->irq, handler, irq_flags, netdev->name,
+ netdev);
+ if (err) {
+ e_err(probe, "Unable to allocate interrupt Error: %d\n", err);
+ }
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMS, IMS_ENABLE_MASK);
+ E1000_WRITE_FLUSH();
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = hw->mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (!e1000_vlan_used(adapter))
+ return;
+
+ if (!test_bit(vid, adapter->active_vlans)) {
+ if (hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !test_bit(old_vid, adapter->active_vlans))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+ } else {
+ adapter->mng_vlan_id = vid;
+ }
+}
+
+static void e1000_init_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* disable hardware interception of ARP */
+ manc &= ~(E1000_MANC_ARP_EN);
+
+ ew32(MANC, manc);
+ }
+}
+
+static void e1000_release_manageability(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->en_mng_pt) {
+ u32 manc = er32(MANC);
+
+ /* re-enable hardware interception of ARP */
+ manc |= E1000_MANC_ARP_EN;
+
+ ew32(MANC, manc);
+ }
+}
+
+/**
+ * e1000_configure - configure the hardware for RX and TX
+ * @adapter = private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ e1000_set_rx_mode(netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ /* call E1000_DESC_UNUSED which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct e1000_rx_ring *ring = &adapter->rx_ring[i];
+ adapter->alloc_rx_buf(adapter, ring,
+ E1000_DESC_UNUSED(ring));
+ }
+}
+
+int e1000_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_wake_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+ return 0;
+}
+
+/**
+ * e1000_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000_reset ***
+ *
+ **/
+
+void e1000_power_up_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 mii_reg = 0;
+
+ /* Just clear the power down bit to wake the phy back up */
+ if (hw->media_type == e1000_media_type_copper) {
+ /* according to the manual, the phy will retain its
+ * settings across a power-down/up cycle */
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ }
+}
+
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Power down the PHY so no link is implied when interface is down *
+ * The PHY cannot be powered down if any of the following is true *
+ * (a) WoL is enabled
+ * (b) AMT is active
+ * (c) SoL/IDER session is active */
+ if (!adapter->wol && hw->mac_type >= e1000_82540 &&
+ hw->media_type == e1000_media_type_copper) {
+ u16 mii_reg = 0;
+
+ switch (hw->mac_type) {
+ case e1000_82540:
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_ce4100:
+ case e1000_82546_rev_3:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ if (er32(MANC) & E1000_MANC_SMBUS_EN)
+ goto out;
+ break;
+ default:
+ goto out;
+ }
+ e1000_read_phy_reg(hw, PHY_CTRL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1000_write_phy_reg(hw, PHY_CTRL, mii_reg);
+ mdelay(1);
+ }
+out:
+ return;
+}
+
+void e1000_down(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl, tctl;
+
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_tx_disable(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ E1000_WRITE_FLUSH();
+ msleep(10);
+
+ napi_disable(&adapter->napi);
+
+ e1000_irq_disable(adapter);
+
+ /*
+ * Setting DOWN must be after irq_disable to prevent
+ * a screaming interrupt. Setting DOWN also prevents
+ * timers and tasks from rescheduling.
+ */
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_carrier_off(netdev);
+
+ e1000_reset(adapter);
+ e1000_clean_all_tx_rings(adapter);
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_reinit_safe(struct e1000_adapter *adapter)
+{
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ rtnl_lock();
+ e1000_down(adapter);
+ e1000_up(adapter);
+ rtnl_unlock();
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reinit_locked(struct e1000_adapter *adapter)
+{
+ /* if rtnl_lock is not held the call path is bogus */
+ ASSERT_RTNL();
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ e1000_down(adapter);
+ e1000_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+}
+
+void e1000_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ bool legacy_pba_adjust = false;
+ u16 hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ case e1000_82544:
+ case e1000_82540:
+ case e1000_82541:
+ case e1000_82541_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82545:
+ case e1000_82545_rev_3:
+ case e1000_82546:
+ case e1000_ce4100:
+ case e1000_82546_rev_3:
+ pba = E1000_PBA_48K;
+ break;
+ case e1000_82547:
+ case e1000_82547_rev_2:
+ legacy_pba_adjust = true;
+ pba = E1000_PBA_30K;
+ break;
+ case e1000_undefined:
+ case e1000_num_macs:
+ break;
+ }
+
+ if (legacy_pba_adjust) {
+ if (hw->max_frame_size > E1000_RXBUFFER_8192)
+ pba -= 8; /* allocate more FIFO for Tx */
+
+ if (hw->mac_type == e1000_82547) {
+ adapter->tx_fifo_head = 0;
+ adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT;
+ adapter->tx_fifo_size =
+ (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ }
+ } else if (hw->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /* adjust PBA for jumbo frames */
+ ew32(PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /*
+ * the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (hw->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = hw->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* PCI/PCIx hardware has PBA alignment constraints */
+ switch (hw->mac_type) {
+ case e1000_82545 ... e1000_82546_rev_3:
+ pba &= ~(E1000_PBA_8K - 1);
+ break;
+ default:
+ break;
+ }
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment or use Early Receive if available */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ }
+
+ ew32(PBA, pba);
+
+ /*
+ * flow control settings:
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - hw->max_frame_size));
+
+ hw->fc_high_water = hwm & 0xFFF8; /* 8-byte granularity */
+ hw->fc_low_water = hw->fc_high_water - 8;
+ hw->fc_pause_time = E1000_FC_PAUSE_TIME;
+ hw->fc_send_xon = 1;
+ hw->fc = hw->original_fc;
+
+ /* Allow time for pending master requests to run */
+ e1000_reset_hw(hw);
+ if (hw->mac_type >= e1000_82544)
+ ew32(WUC, 0);
+
+ if (e1000_init_hw(hw))
+ e_dev_err("Hardware Error\n");
+ e1000_update_mng_vlan(adapter);
+
+ /* if (adapter->hwflags & HWFLAGS_PHY_PWR_BIT) { */
+ if (hw->mac_type >= e1000_82544 &&
+ hw->autoneg == 1 &&
+ hw->autoneg_advertised == ADVERTISE_1000_FULL) {
+ u32 ctrl = er32(CTRL);
+ /* clear phy power management bit if we are in gig only mode,
+ * which if enabled will attempt negotiation to 100Mb, which
+ * can cause a loss of link at power off or driver unload */
+ ctrl &= ~E1000_CTRL_SWDPIN3;
+ ew32(CTRL, ctrl);
+ }
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ e1000_reset_adaptive(hw);
+ e1000_phy_get_info(hw, &adapter->phy_info);
+
+ e1000_release_manageability(adapter);
+}
+
+/**
+ * Dump the eeprom for users having checksum issues
+ **/
+static void e1000_dump_eeprom(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ethtool_eeprom eeprom;
+ const struct ethtool_ops *ops = netdev->ethtool_ops;
+ u8 *data;
+ int i;
+ u16 csum_old, csum_new = 0;
+
+ eeprom.len = ops->get_eeprom_len(netdev);
+ eeprom.offset = 0;
+
+ data = kmalloc(eeprom.len, GFP_KERNEL);
+ if (!data) {
+ pr_err("Unable to allocate memory to dump EEPROM data\n");
+ return;
+ }
+
+ ops->get_eeprom(netdev, &eeprom, data);
+
+ csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +
+ (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);
+ for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)
+ csum_new += data[i] + (data[i + 1] << 8);
+ csum_new = EEPROM_SUM - csum_new;
+
+ pr_err("/*********************/\n");
+ pr_err("Current EEPROM Checksum : 0x%04x\n", csum_old);
+ pr_err("Calculated : 0x%04x\n", csum_new);
+
+ pr_err("Offset Values\n");
+ pr_err("======== ======\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);
+
+ pr_err("Include this output when contacting your support provider.\n");
+ pr_err("This is not a software error! Something bad happened to\n");
+ pr_err("your hardware or EEPROM image. Ignoring this problem could\n");
+ pr_err("result in further problems, possibly loss of data,\n");
+ pr_err("corruption or system hangs!\n");
+ pr_err("The MAC Address will be reset to 00:00:00:00:00:00,\n");
+ pr_err("which is invalid and requires you to set the proper MAC\n");
+ pr_err("address manually before continuing to enable this network\n");
+ pr_err("device. Please inspect the EEPROM dump and report the\n");
+ pr_err("issue to your hardware vendor or Intel Customer Support.\n");
+ pr_err("/*********************/\n");
+
+ kfree(data);
+}
+
+/**
+ * e1000_is_need_ioport - determine if an adapter needs ioport resources or not
+ * @pdev: PCI device information struct
+ *
+ * Return true if an adapter needs ioport resources
+ **/
+static int e1000_is_need_ioport(struct pci_dev *pdev)
+{
+ switch (pdev->device) {
+ case E1000_DEV_ID_82540EM:
+ case E1000_DEV_ID_82540EM_LOM:
+ case E1000_DEV_ID_82540EP:
+ case E1000_DEV_ID_82540EP_LOM:
+ case E1000_DEV_ID_82540EP_LP:
+ case E1000_DEV_ID_82541EI:
+ case E1000_DEV_ID_82541EI_MOBILE:
+ case E1000_DEV_ID_82541ER:
+ case E1000_DEV_ID_82541ER_LOM:
+ case E1000_DEV_ID_82541GI:
+ case E1000_DEV_ID_82541GI_LF:
+ case E1000_DEV_ID_82541GI_MOBILE:
+ case E1000_DEV_ID_82544EI_COPPER:
+ case E1000_DEV_ID_82544EI_FIBER:
+ case E1000_DEV_ID_82544GC_COPPER:
+ case E1000_DEV_ID_82544GC_LOM:
+ case E1000_DEV_ID_82545EM_COPPER:
+ case E1000_DEV_ID_82545EM_FIBER:
+ case E1000_DEV_ID_82546EB_COPPER:
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546EB_QUAD_COPPER:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static u32 e1000_fix_features(struct net_device *netdev, u32 features)
+{
+ /*
+ * Since there is no support for separate rx/tx vlan accel
+ * enable/disable make sure tx flag is always in same state as rx.
+ */
+ if (features & NETIF_F_HW_VLAN_RX)
+ features |= NETIF_F_HW_VLAN_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_TX;
+
+ return features;
+}
+
+static int e1000_set_features(struct net_device *netdev, u32 features)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ u32 changed = features ^ netdev->features;
+
+ if (changed & NETIF_F_HW_VLAN_RX)
+ e1000_vlan_mode(netdev, features);
+
+ if (!(changed & NETIF_F_RXCSUM))
+ return 0;
+
+ adapter->rx_csum = !!(features & NETIF_F_RXCSUM);
+
+ if (netif_running(netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+
+ return 0;
+}
+
+static const struct net_device_ops e1000_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats = e1000_get_stats,
+ .ndo_set_rx_mode = e1000_set_rx_mode,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+ .ndo_fix_features = e1000_fix_features,
+ .ndo_set_features = e1000_set_features,
+};
+
+/**
+ * e1000_init_hw_struct - initialize members of hw struct
+ * @adapter: board private struct
+ * @hw: structure used by e1000_hw.c
+ *
+ * Factors out initialization of the e1000_hw struct to its own function
+ * that can be called very early at init (just after struct allocation).
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ * Returns negative error codes if MAC type setup fails.
+ */
+static int e1000_init_hw_struct(struct e1000_adapter *adapter,
+ struct e1000_hw *hw)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
+
+ hw->max_frame_size = adapter->netdev->mtu +
+ ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+ hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
+
+ /* identify the MAC */
+ if (e1000_set_mac_type(hw)) {
+ e_err(probe, "Unknown MAC Type\n");
+ return -EIO;
+ }
+
+ switch (hw->mac_type) {
+ default:
+ break;
+ case e1000_82541:
+ case e1000_82547:
+ case e1000_82541_rev_2:
+ case e1000_82547_rev_2:
+ hw->phy_init_script = 1;
+ break;
+ }
+
+ e1000_set_media_type(hw);
+ e1000_get_bus_info(hw);
+
+ hw->wait_autoneg_complete = false;
+ hw->tbi_compatibility_en = true;
+ hw->adaptive_ifs = true;
+
+ /* Copper options */
+
+ if (hw->media_type == e1000_media_type_copper) {
+ hw->mdix = AUTO_ALL_MODES;
+ hw->disable_polarity_correction = false;
+ hw->master_slave = E1000_MASTER_SLAVE;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+
+ static int cards_found = 0;
+ static int global_quad_port_a = 0; /* global ksp3 port a indication */
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 tmp = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+ int bars, need_ioport;
+
+ /* do not allocate ioport bars when not needed */
+ need_ioport = e1000_is_need_ioport(pdev);
+ if (need_ioport) {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM | IORESOURCE_IO);
+ err = pci_enable_device(pdev);
+ } else {
+ bars = pci_select_bars(pdev, IORESOURCE_MEM);
+ err = pci_enable_device_mem(pdev);
+ }
+ if (err)
+ return err;
+
+ err = pci_request_selected_regions(pdev, bars, e1000_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+ err = pci_save_state(pdev);
+ if (err)
+ goto err_alloc_etherdev;
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->msg_enable = (1 << debug) - 1;
+ adapter->bars = bars;
+ adapter->need_ioport = need_ioport;
+
+ hw = &adapter->hw;
+ hw->back = adapter;
+
+ err = -EIO;
+ hw->hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ if (adapter->need_ioport) {
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ hw->io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+ }
+
+ /* make ready for any if (hw->...) below */
+ err = e1000_init_hw_struct(adapter, hw);
+ if (err)
+ goto err_sw_init;
+
+ /*
+ * there is a workaround being applied below that limits
+ * 64-bit DMA addresses to 64-bit hardware. There are some
+ * 32-bit adapters that Tx hang when given 64-bit DMA addresses
+ */
+ pci_using_dac = 0;
+ if ((hw->bus_type == e1000_bus_type_pcix) &&
+ !dma_set_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ /*
+ * according to DMA-API-HOWTO, coherent calls will always
+ * succeed if the set call did
+ */
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ pr_err("No usable DMA config, aborting\n");
+ goto err_dma;
+ }
+ dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ }
+
+ netdev->netdev_ops = &e1000_netdev_ops;
+ e1000_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* setup the private structure */
+
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ err = -EIO;
+ if (hw->mac_type == e1000_ce4100) {
+ ce4100_gbe_mdio_base_phy = pci_resource_start(pdev, BAR_1);
+ ce4100_gbe_mdio_base_virt = ioremap(ce4100_gbe_mdio_base_phy,
+ pci_resource_len(pdev, BAR_1));
+
+ if (!ce4100_gbe_mdio_base_virt)
+ goto err_mdio_ioremap;
+ }
+
+ if (hw->mac_type >= e1000_82543) {
+ netdev->hw_features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_RX;
+ netdev->features = NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_FILTER;
+ }
+
+ if ((hw->mac_type >= e1000_82544) &&
+ (hw->mac_type != e1000_82547))
+ netdev->hw_features |= NETIF_F_TSO;
+
+ netdev->features |= netdev->hw_features;
+ netdev->hw_features |= NETIF_F_RXCSUM;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
+
+ /* initialize eeprom parameters */
+ if (e1000_init_eeprom_params(hw)) {
+ e_err(probe, "EEPROM initialization failed\n");
+ goto err_eeprom;
+ }
+
+ /* before reading the EEPROM, reset the controller to
+ * put the device in a known good starting state */
+
+ e1000_reset_hw(hw);
+
+ /* make sure the EEPROM is good */
+ if (e1000_validate_eeprom_checksum(hw) < 0) {
+ e_err(probe, "The EEPROM Checksum Is Not Valid\n");
+ e1000_dump_eeprom(adapter);
+ /*
+ * set MAC address to all zeroes to invalidate and temporary
+ * disable this device for the user. This blocks regular
+ * traffic while still permitting ethtool ioctls from reaching
+ * the hardware as well as allowing the user to run the
+ * interface after manually setting a hw addr using
+ * `ip set address`
+ */
+ memset(hw->mac_addr, 0, netdev->addr_len);
+ } else {
+ /* copy the MAC address out of the EEPROM */
+ if (e1000_read_mac_addr(hw))
+ e_err(probe, "EEPROM Read Error\n");
+ }
+ /* don't block initalization here due to bad MAC address */
+ memcpy(netdev->dev_addr, hw->mac_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr))
+ e_err(probe, "Invalid MAC Address\n");
+
+ init_timer(&adapter->tx_fifo_stall_timer);
+ adapter->tx_fifo_stall_timer.function = e1000_82547_tx_fifo_stall;
+ adapter->tx_fifo_stall_timer.data = (unsigned long)adapter;
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->fifo_stall_task, e1000_82547_tx_fifo_stall_task);
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+ INIT_WORK(&adapter->phy_info_task, e1000_update_phy_info_task);
+
+ e1000_check_options(adapter);
+
+ /* Initial Wake on LAN setting
+ * If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ case e1000_82543:
+ break;
+ case e1000_82544:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data);
+ eeprom_apme_mask = E1000_EEPROM_82544_APM;
+ break;
+ case e1000_82546:
+ case e1000_82546_rev_3:
+ if (er32(STATUS) & E1000_STATUS_FUNC_1){
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ break;
+ }
+ /* Fall Through */
+ default:
+ e1000_read_eeprom(hw,
+ EEPROM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ break;
+ }
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82546GB_PCIE:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546EB_FIBER:
+ case E1000_DEV_ID_82546GB_FIBER:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (er32(STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->quad_port_a = 1;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* Auto detect PHY address */
+ if (hw->mac_type == e1000_ce4100) {
+ for (i = 0; i < 32; i++) {
+ hw->phy_addr = i;
+ e1000_read_phy_reg(hw, PHY_ID2, &tmp);
+ if (tmp == 0 || tmp == 0xFF) {
+ if (i == 31)
+ goto err_eeprom;
+ continue;
+ } else
+ break;
+ }
+ }
+
+ /* reset the hardware with the new settings */
+ e1000_reset(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ e1000_vlan_mode(netdev, netdev->features);
+
+ /* print bus type/speed/width info */
+ e_info(probe, "(PCI%s:%dMHz:%d-bit) %pM\n",
+ ((hw->bus_type == e1000_bus_type_pcix) ? "-X" : ""),
+ ((hw->bus_speed == e1000_bus_speed_133) ? 133 :
+ (hw->bus_speed == e1000_bus_speed_120) ? 120 :
+ (hw->bus_speed == e1000_bus_speed_100) ? 100 :
+ (hw->bus_speed == e1000_bus_speed_66) ? 66 : 33),
+ ((hw->bus_width == e1000_bus_width_64) ? 64 : 32),
+ netdev->dev_addr);
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ e_info(probe, "Intel(R) PRO/1000 Network Connection\n");
+
+ cards_found++;
+ return 0;
+
+err_register:
+err_eeprom:
+ e1000_phy_hw_reset(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_dma:
+err_sw_init:
+err_mdio_ioremap:
+ iounmap(ce4100_gbe_mdio_base_virt);
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev, bars);
+err_pci_reg:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+ del_timer_sync(&adapter->tx_fifo_stall_timer);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+
+ e1000_release_manageability(adapter);
+
+ unregister_netdev(netdev);
+
+ e1000_phy_hw_reset(hw);
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev, adapter->bars);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * e1000_init_hw_struct MUST be called before this function
+ **/
+
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+
+ if (e1000_alloc_queues(adapter)) {
+ e_err(probe, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__E1000_DOWN, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct e1000_tx_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct e1000_rx_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->flags))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ e1000_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) {
+ e1000_update_mng_vlan(adapter);
+ }
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as e1000_up() */
+ clear_bit(__E1000_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ ew32(ICS, E1000_ICS_LSC);
+
+ return E1000_SUCCESS;
+
+err_req_irq:
+ e1000_power_down_phy(adapter);
+ e1000_free_all_rx_resources(adapter);
+err_setup_rx:
+ e1000_free_all_tx_resources(adapter);
+err_setup_tx:
+ e1000_reset(adapter);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ e1000_power_down_phy(adapter);
+ e1000_free_irq(adapter);
+
+ e1000_free_all_tx_resources(adapter);
+ e1000_free_all_rx_resources(adapter);
+
+ /* kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it) */
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ !test_bit(adapter->mng_vlan_id, adapter->active_vlans)) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary
+ * @adapter: address of board private structure
+ * @start: address of beginning of memory
+ * @len: length of memory
+ **/
+static bool e1000_check_64k_bound(struct e1000_adapter *adapter, void *start,
+ unsigned long len)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long begin = (unsigned long)start;
+ unsigned long end = begin + len;
+
+ /* First rev 82545 and 82546 need to not allow any memory
+ * write location to cross 64k boundary due to errata 23 */
+ if (hw->mac_type == e1000_82545 ||
+ hw->mac_type == e1000_ce4100 ||
+ hw->mac_type == e1000_82546) {
+ return ((begin ^ (end - 1)) >> 16) != 0 ? false : true;
+ }
+
+ return true;
+}
+
+/**
+ * e1000_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @txdr: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+static int e1000_setup_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *txdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct e1000_buffer) * txdr->count;
+ txdr->buffer_info = vzalloc(size);
+ if (!txdr->buffer_info) {
+ e_err(probe, "Unable to allocate memory for the Tx descriptor "
+ "ring\n");
+ return -ENOMEM;
+ }
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct e1000_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
+ GFP_KERNEL);
+ if (!txdr->desc) {
+setup_tx_desc_die:
+ vfree(txdr->buffer_info);
+ e_err(probe, "Unable to allocate memory for the Tx descriptor "
+ "ring\n");
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ void *olddesc = txdr->desc;
+ dma_addr_t olddma = txdr->dma;
+ e_err(tx_err, "txdr align check failed: %u bytes at %p\n",
+ txdr->size, txdr->desc);
+ /* Try again, without freeing the previous */
+ txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size,
+ &txdr->dma, GFP_KERNEL);
+ /* Failed allocation, critical failure */
+ if (!txdr->desc) {
+ dma_free_coherent(&pdev->dev, txdr->size, olddesc,
+ olddma);
+ goto setup_tx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) {
+ /* give up */
+ dma_free_coherent(&pdev->dev, txdr->size, txdr->desc,
+ txdr->dma);
+ dma_free_coherent(&pdev->dev, txdr->size, olddesc,
+ olddma);
+ e_err(probe, "Unable to allocate aligned memory "
+ "for the transmit descriptor ring\n");
+ vfree(txdr->buffer_info);
+ return -ENOMEM;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ dma_free_coherent(&pdev->dev, txdr->size, olddesc,
+ olddma);
+ }
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = e1000_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (err) {
+ e_err(probe, "Allocation for Tx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_configure_tx - Configure 8254x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ u64 tdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tdlen, tctl, tipg;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ switch (adapter->num_tx_queues) {
+ case 1:
+ default:
+ tdba = adapter->tx_ring[0].dma;
+ tdlen = adapter->tx_ring[0].count *
+ sizeof(struct e1000_tx_desc);
+ ew32(TDLEN, tdlen);
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDBAL, (tdba & 0x00000000ffffffffULL));
+ ew32(TDT, 0);
+ ew32(TDH, 0);
+ adapter->tx_ring[0].tdh = ((hw->mac_type >= e1000_82543) ? E1000_TDH : E1000_82542_TDH);
+ adapter->tx_ring[0].tdt = ((hw->mac_type >= e1000_82543) ? E1000_TDT : E1000_82542_TDT);
+ break;
+ }
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ if ((hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes))
+ tipg = DEFAULT_82543_TIPG_IPGT_FIBER;
+ else
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER;
+
+ switch (hw->mac_type) {
+ case e1000_82542_rev2_0:
+ case e1000_82542_rev2_1:
+ tipg = DEFAULT_82542_TIPG_IPGT;
+ ipgr1 = DEFAULT_82542_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82542_TIPG_IPGR2;
+ break;
+ default:
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1;
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2;
+ break;
+ }
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+
+ ew32(TIDV, adapter->tx_int_delay);
+ if (hw->mac_type >= e1000_82540)
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ e1000_config_collision_dist(hw);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ if (hw->mac_type < e1000_82543)
+ adapter->txd_cmd |= E1000_TXD_CMD_RPS;
+ else
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ /* Cache if we're 82544 running in PCI-X because we'll
+ * need this to apply a workaround later in the send path. */
+ if (hw->mac_type == e1000_82544 &&
+ hw->bus_type == e1000_bus_type_pcix)
+ adapter->pcix_82544 = 1;
+
+ ew32(TCTL, tctl);
+
+}
+
+/**
+ * e1000_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rxdr: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_setup_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rxdr)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct e1000_buffer) * rxdr->count;
+ rxdr->buffer_info = vzalloc(size);
+ if (!rxdr->buffer_info) {
+ e_err(probe, "Unable to allocate memory for the Rx descriptor "
+ "ring\n");
+ return -ENOMEM;
+ }
+
+ desc_len = sizeof(struct e1000_rx_desc);
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * desc_len;
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
+ GFP_KERNEL);
+
+ if (!rxdr->desc) {
+ e_err(probe, "Unable to allocate memory for the Rx descriptor "
+ "ring\n");
+setup_rx_desc_die:
+ vfree(rxdr->buffer_info);
+ return -ENOMEM;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ void *olddesc = rxdr->desc;
+ dma_addr_t olddma = rxdr->dma;
+ e_err(rx_err, "rxdr align check failed: %u bytes at %p\n",
+ rxdr->size, rxdr->desc);
+ /* Try again, without freeing the previous */
+ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size,
+ &rxdr->dma, GFP_KERNEL);
+ /* Failed allocation, critical failure */
+ if (!rxdr->desc) {
+ dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
+ olddma);
+ e_err(probe, "Unable to allocate memory for the Rx "
+ "descriptor ring\n");
+ goto setup_rx_desc_die;
+ }
+
+ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) {
+ /* give up */
+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->desc,
+ rxdr->dma);
+ dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
+ olddma);
+ e_err(probe, "Unable to allocate aligned memory for "
+ "the Rx descriptor ring\n");
+ goto setup_rx_desc_die;
+ } else {
+ /* Free old allocation, new allocation was successful */
+ dma_free_coherent(&pdev->dev, rxdr->size, olddesc,
+ olddma);
+ }
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+ rxdr->rx_skb_top = NULL;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int e1000_setup_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = e1000_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (err) {
+ e_err(probe, "Allocation for Rx Queue %u failed\n", i);
+ for (i-- ; i >= 0; i--)
+ e1000_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ if (hw->tbi_compatibility_on == 1)
+ rctl |= E1000_RCTL_SBP;
+ else
+ rctl &= ~E1000_RCTL_SBP;
+
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case E1000_RXBUFFER_2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case E1000_RXBUFFER_4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case E1000_RXBUFFER_8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case E1000_RXBUFFER_16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_configure_rx - Configure 8254x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ u64 rdba;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rdlen, rctl, rxcsum;
+
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+ } else {
+ rdlen = adapter->rx_ring[0].count *
+ sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ if (hw->mac_type >= e1000_82540) {
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ switch (adapter->num_rx_queues) {
+ case 1:
+ default:
+ rdba = adapter->rx_ring[0].dma;
+ ew32(RDLEN, rdlen);
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDBAL, (rdba & 0x00000000ffffffffULL));
+ ew32(RDT, 0);
+ ew32(RDH, 0);
+ adapter->rx_ring[0].rdh = ((hw->mac_type >= e1000_82543) ? E1000_RDH : E1000_82542_RDH);
+ adapter->rx_ring[0].rdt = ((hw->mac_type >= e1000_82543) ? E1000_RDT : E1000_82542_RDT);
+ break;
+ }
+
+ /* Enable 82543 Receive Checksum Offload for TCP and UDP */
+ if (hw->mac_type >= e1000_82543) {
+ rxcsum = er32(RXCSUM);
+ if (adapter->rx_csum)
+ rxcsum |= E1000_RXCSUM_TUOFL;
+ else
+ /* don't need to clear IPPCSE as it defaults to 0 */
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ ew32(RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+
+static void e1000_free_tx_resources(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void e1000_free_all_tx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_free_tx_resources(adapter, &adapter->tx_ring[i]);
+}
+
+static void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* buffer_info must be completely set up in the transmit path */
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->last_tx_tso = 0;
+
+ writel(0, hw->hw_addr + tx_ring->tdh);
+ writel(0, hw->hw_addr + tx_ring->tdt);
+}
+
+/**
+ * e1000_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ e1000_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+/**
+ * e1000_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+static void e1000_free_rx_resources(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ e1000_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000_free_all_rx_resources(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_free_rx_resources(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_rx_irq) {
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ } else if (buffer_info->dma &&
+ adapter->clean_rx == e1000_clean_jumbo_rx_irq) {
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ }
+
+ buffer_info->dma = 0;
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->rx_skb_top) {
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ }
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, hw->hw_addr + rx_ring->rdh);
+ writel(0, hw->hw_addr + rx_ring->rdt);
+}
+
+/**
+ * e1000_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+
+static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ e1000_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/* The 82542 2.0 (revision 2) needs to have the receive unit in reset
+ * and memory write and invalidate disabled for certain operations
+ */
+static void e1000_enter_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ e1000_pci_clear_mwi(hw);
+
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (netif_running(netdev))
+ e1000_clean_all_rx_rings(adapter);
+}
+
+static void e1000_leave_82542_rst(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 rctl;
+
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_RST;
+ ew32(RCTL, rctl);
+ E1000_WRITE_FLUSH();
+ mdelay(5);
+
+ if (hw->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+
+ if (netif_running(netdev)) {
+ /* No need to loop, because 82542 supports only 1 queue */
+ struct e1000_rx_ring *ring = &adapter->rx_ring[0];
+ e1000_configure_rx(adapter);
+ adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+ }
+}
+
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac_addr, addr->sa_data, netdev->addr_len);
+
+ e1000_rar_set(hw, hw->mac_addr, 0);
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ return 0;
+}
+
+/**
+ * e1000_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void e1000_set_rx_mode(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ bool use_uc = false;
+ u32 rctl;
+ u32 hash_value;
+ int i, rar_entries = E1000_RAR_ENTRIES;
+ int mta_reg_count = E1000_NUM_MTA_REGISTERS;
+ u32 *mcarray = kcalloc(mta_reg_count, sizeof(u32), GFP_ATOMIC);
+
+ if (!mcarray) {
+ e_err(probe, "memory allocation failed\n");
+ return;
+ }
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI)
+ rctl |= E1000_RCTL_MPE;
+ else
+ rctl &= ~E1000_RCTL_MPE;
+ /* Enable VLAN filter if there is a VLAN */
+ if (e1000_vlan_used(adapter))
+ rctl |= E1000_RCTL_VFE;
+ }
+
+ if (netdev_uc_count(netdev) > rar_entries - 1) {
+ rctl |= E1000_RCTL_UPE;
+ } else if (!(netdev->flags & IFF_PROMISC)) {
+ rctl &= ~E1000_RCTL_UPE;
+ use_uc = true;
+ }
+
+ ew32(RCTL, rctl);
+
+ /* 82542 2.0 needs to be in reset to write receive address registers */
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_enter_82542_rst(adapter);
+
+ /* load the first 14 addresses into the exact filters 1-14. Unicast
+ * addresses take precedence to avoid disabling unicast filtering
+ * when possible.
+ *
+ * RAR 0 is used for the station MAC address
+ * if there are not 14 addresses, go ahead and clear the filters
+ */
+ i = 1;
+ if (use_uc)
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (i == rar_entries)
+ break;
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+
+ netdev_for_each_mc_addr(ha, netdev) {
+ if (i == rar_entries) {
+ /* load any remaining addresses into the hash table */
+ u32 hash_reg, hash_bit, mta;
+ hash_value = e1000_hash_mc_addr(hw, ha->addr);
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+ mta = (1 << hash_bit);
+ mcarray[hash_reg] |= mta;
+ } else {
+ e1000_rar_set(hw, ha->addr, i++);
+ }
+ }
+
+ for (; i < rar_entries; i++) {
+ E1000_WRITE_REG_ARRAY(hw, RA, i << 1, 0);
+ E1000_WRITE_FLUSH();
+ E1000_WRITE_REG_ARRAY(hw, RA, (i << 1) + 1, 0);
+ E1000_WRITE_FLUSH();
+ }
+
+ /* write the hash table completely, write from bottom to avoid
+ * both stupid write combining chipsets, and flushing each write */
+ for (i = mta_reg_count - 1; i >= 0 ; i--) {
+ /*
+ * If we are on an 82544 has an errata where writing odd
+ * offsets overwrites the previous even offset, but writing
+ * backwards over the range solves the issue by always
+ * writing the odd offset first
+ */
+ E1000_WRITE_REG_ARRAY(hw, MTA, i, mcarray[i]);
+ }
+ E1000_WRITE_FLUSH();
+
+ if (hw->mac_type == e1000_82542_rev2_0)
+ e1000_leave_82542_rst(adapter);
+
+ kfree(mcarray);
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ schedule_work(&adapter->phy_info_task);
+}
+
+static void e1000_update_phy_info_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter,
+ phy_info_task);
+ struct e1000_hw *hw = &adapter->hw;
+
+ rtnl_lock();
+ e1000_phy_get_info(hw, &adapter->phy_info);
+ rtnl_unlock();
+}
+
+/**
+ * e1000_82547_tx_fifo_stall - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_82547_tx_fifo_stall(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ schedule_work(&adapter->fifo_stall_task);
+}
+
+/**
+ * e1000_82547_tx_fifo_stall_task - task to complete work
+ * @work: work struct contained inside adapter struct
+ **/
+static void e1000_82547_tx_fifo_stall_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter,
+ fifo_stall_task);
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 tctl;
+
+ rtnl_lock();
+ if (atomic_read(&adapter->tx_fifo_stall)) {
+ if ((er32(TDT) == er32(TDH)) &&
+ (er32(TDFT) == er32(TDFH)) &&
+ (er32(TDFTS) == er32(TDFHS))) {
+ tctl = er32(TCTL);
+ ew32(TCTL, tctl & ~E1000_TCTL_EN);
+ ew32(TDFT, adapter->tx_head_addr);
+ ew32(TDFH, adapter->tx_head_addr);
+ ew32(TDFTS, adapter->tx_head_addr);
+ ew32(TDFHS, adapter->tx_head_addr);
+ ew32(TCTL, tctl);
+ E1000_WRITE_FLUSH();
+
+ adapter->tx_fifo_head = 0;
+ atomic_set(&adapter->tx_fifo_stall, 0);
+ netif_wake_queue(netdev);
+ } else if (!test_bit(__E1000_DOWN, &adapter->flags)) {
+ mod_timer(&adapter->tx_fifo_stall_timer, jiffies + 1);
+ }
+ }
+ rtnl_unlock();
+}
+
+bool e1000_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+
+ /* get_link_status is set on LSC (link status) interrupt or rx
+ * sequence error interrupt (except on intel ce4100).
+ * get_link_status will stay false until the
+ * e1000_check_for_link establishes link for copper adapters
+ * ONLY
+ */
+ switch (hw->media_type) {
+ case e1000_media_type_copper:
+ if (hw->mac_type == e1000_ce4100)
+ hw->get_link_status = 1;
+ if (hw->get_link_status) {
+ e1000_check_for_link(hw);
+ link_active = !hw->get_link_status;
+ } else {
+ link_active = true;
+ }
+ break;
+ case e1000_media_type_fiber:
+ e1000_check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ e1000_check_for_link(hw);
+ link_active = hw->serdes_has_link;
+ break;
+ default:
+ break;
+ }
+
+ return link_active;
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *)data;
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_ring *txdr = adapter->tx_ring;
+ u32 link, tctl;
+
+ link = e1000_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link)
+ goto link_up;
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+ bool txb2b = true;
+ /* update snapshot of PHY registers on LSC */
+ e1000_get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = er32(CTRL);
+ pr_info("%s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None")));
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = false;
+ adapter->tx_timeout_factor = 16;
+ break;
+ case SPEED_100:
+ txb2b = false;
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ /* enable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ netif_carrier_on(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ adapter->smartspeed = 0;
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ pr_info("%s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+
+ e1000_smartspeed(adapter);
+ }
+
+link_up:
+ e1000_update_stats(adapter);
+
+ hw->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ hw->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
+ adapter->gorcl_old = adapter->stats.gorcl;
+ adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
+ adapter->gotcl_old = adapter->stats.gotcl;
+
+ e1000_update_adaptive(hw);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (E1000_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Simple mode for Interrupt Throttle Rate (ITR) */
+ if (hw->mac_type >= e1000_82540 && adapter->itr_setting == 4) {
+ /*
+ * Symmetric Tx/Rx gets a reduced ITR=2000;
+ * Total asymmetrical Tx or Rx gets ITR=8000;
+ * everyone else is between 2000-8000.
+ */
+ u32 goc = (adapter->gotcl + adapter->gorcl) / 10000;
+ u32 dif = (adapter->gotcl > adapter->gorcl ?
+ adapter->gotcl - adapter->gorcl :
+ adapter->gorcl - adapter->gotcl) / 10000;
+ u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
+
+ ew32(ITR, 1000000000 / (itr * 256));
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = true;
+
+ /* Reset the timer */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see e1000_param.c)
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ goto update_itr_done;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* jumbo frames get bulk treatment*/
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* jumbo frames need bulk latency setting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000)
+ retval = bulk_latency;
+ else if (packets <= 2 && bytes < 512)
+ retval = lowest_latency;
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ if (unlikely(hw->mac_type < e1000_82540))
+ return;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (unlikely(adapter->link_speed != SPEED_1000)) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ }
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ int err;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb->protocol == htons(ETH_P_IPV6)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (++i == tx_ring->count) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, struct sk_buff *skb)
+{
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return false;
+
+ switch (skb->protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ e_warn(drv, "checksum_partial proto=%x!\n",
+ skb->protocol);
+ break;
+ }
+
+ css = skb_checksum_start_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+#define E1000_MAX_TXD_PWR 12
+#define E1000_MAX_DATA_PER_TXD (1<<E1000_MAX_TXD_PWR)
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for Controller erratum --
+ * descriptor for non-tso packet in a linear SKB that follows a
+ * tso gets written back prematurely before the data is fully
+ * DMA'd to the controller */
+ if (!skb->data_len && tx_ring->last_tx_tso &&
+ !skb_is_gso(skb)) {
+ tx_ring->last_tx_tso = 0;
+ size -= 4;
+ }
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+ /* work-around for errata 10 and it applies
+ * to all controllers in PCI-X mode
+ * The fix is to make sure that the first descriptor of a
+ * packet is smaller than 2048 - 16 - 16 (or 2016) bytes
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (size > 2015) && count == 0))
+ size = 2015;
+
+ /* Workaround for potential 82544 hang in PCI-X. Avoid
+ * terminating buffers within evenly-aligned dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(skb->data + offset + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (unlikely(i == tx_ring->count))
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
+ size -= 4;
+ /* Workaround for potential 82544 hang in PCI-X.
+ * Avoid terminating buffers within evenly-aligned
+ * dwords. */
+ if (unlikely(adapter->pcix_82544 &&
+ !((unsigned long)(page_to_phys(frag->page) + offset
+ + size - 1) & 4) &&
+ size > 4))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
+ offset, size,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = i;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring, int tx_flags,
+ int count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_TSO)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (likely(tx_flags & E1000_TX_FLAGS_IPV4))
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (likely(tx_flags & E1000_TX_FLAGS_CSUM)) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (unlikely(tx_flags & E1000_TX_FLAGS_VLAN)) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, hw->hw_addr + tx_ring->tdt);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+/**
+ * 82547 workaround to avoid controller hang in half-duplex environment.
+ * The workaround is to avoid queuing a large packet that would span
+ * the internal Tx FIFO ring boundary by notifying the stack to resend
+ * the packet at a later time. This gives the Tx FIFO an opportunity to
+ * flush all packets. When that occurs, we reset the Tx FIFO pointers
+ * to the beginning of the Tx FIFO.
+ **/
+
+#define E1000_FIFO_HDR 0x10
+#define E1000_82547_PAD_LEN 0x3E0
+
+static int e1000_82547_fifo_workaround(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ u32 fifo_space = adapter->tx_fifo_size - adapter->tx_fifo_head;
+ u32 skb_fifo_len = skb->len + E1000_FIFO_HDR;
+
+ skb_fifo_len = ALIGN(skb_fifo_len, E1000_FIFO_HDR);
+
+ if (adapter->link_duplex != HALF_DUPLEX)
+ goto no_fifo_stall_required;
+
+ if (atomic_read(&adapter->tx_fifo_stall))
+ return 1;
+
+ if (skb_fifo_len >= (E1000_82547_PAD_LEN + fifo_space)) {
+ atomic_set(&adapter->tx_fifo_stall, 1);
+ return 1;
+ }
+
+no_fifo_stall_required:
+ adapter->tx_fifo_head += skb_fifo_len;
+ if (adapter->tx_fifo_head >= adapter->tx_fifo_size)
+ adapter->tx_fifo_head -= adapter->tx_fifo_size;
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(E1000_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev,
+ struct e1000_tx_ring *tx_ring, int size)
+{
+ if (likely(E1000_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_tx_ring *tx_ring;
+ unsigned int first, max_per_txd = E1000_MAX_DATA_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb_headlen(skb);
+ unsigned int nr_frags;
+ unsigned int mss;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ tx_ring = adapter->tx_ring;
+
+ if (unlikely(skb->len <= 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ mss = skb_shinfo(skb)->gso_size;
+ /* The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops. */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ if (skb->data_len && hdr_len == len) {
+ switch (hw->mac_type) {
+ unsigned int pull_size;
+ case e1000_82544:
+ /* Make sure we have room to chop off 4 bytes,
+ * and that the end alignment will work out to
+ * this hardware's requirements
+ * NOTE: this is a TSO only workaround
+ * if end byte alignment not correct move us
+ * into the next dword */
+ if ((unsigned long)(skb_tail_pointer(skb) - 1) & 4)
+ break;
+ /* fall through */
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ e_err(drv, "__pskb_pull_tail "
+ "failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb_headlen(skb);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ /* Controller Erratum workaround */
+ if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ if (adapter->pcix_82544)
+ count++;
+
+ /* work-around for errata 10 and it applies to all controllers
+ * in PCI-X mode, so add one more descriptor to the count
+ */
+ if (unlikely((hw->bus_type == e1000_bus_type_pcix) &&
+ (len > 2015)))
+ count++;
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+ if (adapter->pcix_82544)
+ count += nr_frags;
+
+ /* need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time */
+ if (unlikely(e1000_maybe_stop_tx(netdev, tx_ring, count + 2)))
+ return NETDEV_TX_BUSY;
+
+ if (unlikely(hw->mac_type == e1000_82547)) {
+ if (unlikely(e1000_82547_fifo_workaround(adapter, skb))) {
+ netif_stop_queue(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->tx_fifo_stall_timer,
+ jiffies + 1);
+ return NETDEV_TX_BUSY;
+ }
+ }
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, tx_ring, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso)) {
+ if (likely(hw->mac_type != e1000_82544))
+ tx_ring->last_tx_tso = 1;
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ } else if (likely(e1000_tx_csum(adapter, tx_ring, skb)))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ if (likely(skb->protocol == htons(ETH_P_IP)))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ count = e1000_tx_map(adapter, tx_ring, skb, first, max_per_txd,
+ nr_frags, mss);
+
+ if (count) {
+ e1000_tx_queue(adapter, tx_ring, tx_flags, count);
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 2);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter =
+ container_of(work, struct e1000_adapter, reset_task);
+
+ e1000_reinit_safe(adapter);
+}
+
+/**
+ * e1000_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
+{
+ /* only return the current stats */
+ return &netdev->stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
+
+ if ((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) ||
+ (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ e_err(probe, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Adapter-specific max frame size limits. */
+ switch (hw->mac_type) {
+ case e1000_undefined ... e1000_82542_rev2_1:
+ if (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ e_err(probe, "Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+ break;
+ default:
+ /* Capable of supporting up to MAX_JUMBO_FRAME_SIZE limit. */
+ break;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->flags))
+ msleep(1);
+ /* e1000_down has a dependency on max_frame_size */
+ hw->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ e1000_down(adapter);
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * however with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs */
+
+ if (max_frame <= E1000_RXBUFFER_2048)
+ adapter->rx_buffer_len = E1000_RXBUFFER_2048;
+ else
+#if (PAGE_SIZE >= E1000_RXBUFFER_16384)
+ adapter->rx_buffer_len = E1000_RXBUFFER_16384;
+#elif (PAGE_SIZE >= E1000_RXBUFFER_4096)
+ adapter->rx_buffer_len = PAGE_SIZE;
+#endif
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if (!hw->tbi_compatibility_on &&
+ ((max_frame == (ETH_FRAME_LEN + ETH_FCS_LEN)) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE)))
+ adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+
+ pr_info("%s changing MTU from %d to %d\n",
+ netdev->name, netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+ else
+ e1000_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->flags);
+
+ return 0;
+}
+
+/**
+ * e1000_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void e1000_update_stats(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long flags;
+ u16 phy_tmp;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+
+ /* these counters are modified from e1000_tbi_adjust_stats,
+ * called from the interrupt context, so they must only
+ * be written while holding adapter->stats_lock
+ */
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorcl += er32(GORCL);
+ adapter->stats.gorch += er32(GORCH);
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ adapter->stats.prc64 += er32(PRC64);
+ adapter->stats.prc127 += er32(PRC127);
+ adapter->stats.prc255 += er32(PRC255);
+ adapter->stats.prc511 += er32(PRC511);
+ adapter->stats.prc1023 += er32(PRC1023);
+ adapter->stats.prc1522 += er32(PRC1522);
+
+ adapter->stats.symerrs += er32(SYMERRS);
+ adapter->stats.mpc += er32(MPC);
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+ adapter->stats.sec += er32(SEC);
+ adapter->stats.rlec += er32(RLEC);
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.fcruc += er32(FCRUC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotcl += er32(GOTCL);
+ adapter->stats.gotch += er32(GOTCH);
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+ adapter->stats.rfc += er32(RFC);
+ adapter->stats.rjc += er32(RJC);
+ adapter->stats.torl += er32(TORL);
+ adapter->stats.torh += er32(TORH);
+ adapter->stats.totl += er32(TOTL);
+ adapter->stats.toth += er32(TOTH);
+ adapter->stats.tpr += er32(TPR);
+
+ adapter->stats.ptc64 += er32(PTC64);
+ adapter->stats.ptc127 += er32(PTC127);
+ adapter->stats.ptc255 += er32(PTC255);
+ adapter->stats.ptc511 += er32(PTC511);
+ adapter->stats.ptc1023 += er32(PTC1023);
+ adapter->stats.ptc1522 += er32(PTC1522);
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->tx_packet_delta;
+ hw->collision_delta = er32(COLC);
+ adapter->stats.colc += hw->collision_delta;
+
+ if (hw->mac_type >= e1000_82543) {
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.tncrs += er32(TNCRS);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+ }
+
+ /* Fill out the OS statistics structure */
+ netdev->stats.multicast = adapter->stats.mprc;
+ netdev->stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ netdev->stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
+ netdev->stats.rx_length_errors = adapter->stats.rlerrc;
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
+ netdev->stats.tx_errors = adapter->stats.txerrc;
+ netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+ netdev->stats.tx_window_errors = adapter->stats.latecol;
+ netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+ if (hw->bad_tx_carr_stats_fd &&
+ adapter->link_duplex == FULL_DUPLEX) {
+ netdev->stats.tx_carrier_errors = 0;
+ adapter->stats.tncrs = 0;
+ }
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+
+ if ((hw->mac_type <= e1000_82546) &&
+ (hw->phy_type == e1000_phy_m88) &&
+ !e1000_read_phy_reg(hw, M88E1000_RX_ERR_CNTR, &phy_tmp))
+ adapter->phy_stats.receive_errors += phy_tmp;
+ }
+
+ /* Management Stats */
+ if (hw->has_smbus) {
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+ }
+
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (unlikely((!icr)))
+ return IRQ_NONE; /* Not our interrupt */
+
+ /*
+ * we might have caused the interrupt, but the above
+ * read cleared it, and just in case the driver is
+ * down there is nothing to do so return handled
+ */
+ if (unlikely(test_bit(__E1000_DOWN, &adapter->flags)))
+ return IRQ_HANDLED;
+
+ if (unlikely(icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC))) {
+ hw->get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ /* disable interrupts, without the synchronize_irq bit */
+ ew32(IMC, ~0);
+ E1000_WRITE_FLUSH();
+
+ if (likely(napi_schedule_prep(&adapter->napi))) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ } else {
+ /* this really should not happen! if it does it is basically a
+ * bug, but not a hard error, so enable ints and continue */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ int tx_clean_complete = 0, work_done = 0;
+
+ tx_clean_complete = e1000_clean_tx_irq(adapter, &adapter->tx_ring[0]);
+
+ adapter->clean_rx(adapter, &adapter->rx_ring[0], &work_done, budget);
+
+ if (!tx_clean_complete)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (likely(adapter->itr_setting & 3))
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter,
+ struct e1000_tx_ring *tx_ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes=0, total_tx_packets=0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ rmb(); /* read buffer_info after eop_desc */
+ for ( ; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ struct sk_buff *skb = buffer_info->skb;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_tx_packets += segs;
+ total_tx_bytes += bytecount;
+ }
+ e1000_unmap_and_free_tx_resource(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ if (unlikely(++i == tx_ring->count)) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (unlikely(count && netif_carrier_ok(netdev) &&
+ E1000_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__E1000_DOWN, &adapter->flags))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ e_err(drv, "Detected Tx Unit Hang\n"
+ " Tx Queue <%lu>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ (unsigned long)((tx_ring - adapter->tx_ring) /
+ sizeof(struct e1000_tx_ring)),
+ readl(hw->hw_addr + tx_ring->tdh),
+ readl(hw->hw_addr + tx_ring->tdt),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ netdev->stats.tx_bytes += total_tx_bytes;
+ netdev->stats.tx_packets += total_tx_packets;
+ return count < tx_ring->count;
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload for 82543
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+
+ skb_checksum_none_assert(skb);
+
+ /* 82543 or newer only */
+ if (unlikely(hw->mac_type < e1000_82543)) return;
+ /* Ignore Checksum bit is set */
+ if (unlikely(status & E1000_RXD_STAT_IXSM)) return;
+ /* TCP/UDP checksum error bit is set */
+ if (unlikely(errors & E1000_RXD_ERR_TCPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+ /* TCP/UDP Checksum has not been calculated */
+ if (!(status & E1000_RXD_STAT_TCPCS))
+ return;
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (likely(status & E1000_RXD_STAT_TCPCS)) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+ u16 length)
+{
+ bi->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ */
+static void e1000_receive_skb(struct e1000_adapter *adapter, u8 status,
+ __le16 vlan, struct sk_buff *skb)
+{
+ skb->protocol = eth_type_trans(skb, adapter->netdev);
+
+ if (status & E1000_RXD_STAT_VP) {
+ u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+
+ __vlan_hwaccel_put_tag(skb, vid);
+ }
+ napi_gro_receive(&adapter->napi, skb);
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ */
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long irq_flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* errors is only valid for DD + EOP descriptors */
+ if (unlikely((status & E1000_RXD_STAT_EOP) &&
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock,
+ irq_flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ irq_flags);
+ length--;
+ } else {
+ /* recycle both page and skb */
+ buffer_info->skb = skb;
+ /* an error means any chain goes out the window
+ * too */
+ if (rx_ring->rx_skb_top)
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ goto next_desc;
+ }
+ }
+
+#define rxtop rx_ring->rx_skb_top
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ /* this is the beginning of a chain */
+ rxtop = skb;
+ skb_fill_page_desc(rxtop, 0, buffer_info->page,
+ 0, length);
+ } else {
+ /* this is the middle of a chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the skb, only consumed the page */
+ buffer_info->skb = skb;
+ }
+ e1000_consume_page(buffer_info, rxtop, length);
+ goto next_desc;
+ } else {
+ if (rxtop) {
+ /* end of the chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the current skb, we only consumed the
+ * page */
+ buffer_info->skb = skb;
+ skb = rxtop;
+ rxtop = NULL;
+ e1000_consume_page(buffer_info, skb, length);
+ } else {
+ /* no chain, got EOP, this buf is the packet
+ * copybreak to save the put_page/alloc_page */
+ if (length <= copybreak &&
+ skb_tailroom(skb) >= length) {
+ u8 *vaddr;
+ vaddr = kmap_atomic(buffer_info->page,
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr, length);
+ kunmap_atomic(vaddr,
+ KM_SKB_DATA_SOFTIRQ);
+ /* re-use the page, so don't erase
+ * buffer_info->page */
+ skb_put(skb, length);
+ } else {
+ skb_fill_page_desc(skb, 0,
+ buffer_info->page, 0,
+ length);
+ e1000_consume_page(buffer_info, skb,
+ length);
+ }
+ }
+ }
+
+ /* Receive Checksum Offload XXX recompute due to CRC strip? */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ pskb_trim(skb, skb->len - 4);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /* eth type trans needs skb->data to point to something */
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ e_err(drv, "pskb_may_pull failed.\n");
+ dev_kfree_skb(skb);
+ goto next_desc;
+ }
+
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/*
+ * this should improve performance for small packets with large amounts
+ * of reassembly being done in the stack
+ */
+static void e1000_check_copybreak(struct net_device *netdev,
+ struct e1000_buffer *buffer_info,
+ u32 length, struct sk_buff **skb)
+{
+ struct sk_buff *new_skb;
+
+ if (length > copybreak)
+ return;
+
+ new_skb = netdev_alloc_skb_ip_align(netdev, length);
+ if (!new_skb)
+ return;
+
+ skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
+ (*skb)->data - NET_IP_ALIGN,
+ length + NET_IP_ALIGN);
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = *skb;
+ *skb = new_skb;
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ * @rx_ring: ring to clean
+ * @work_done: amount of napi work completed this call
+ * @work_to_do: max amount of work allowed for this call to do
+ */
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ unsigned long flags;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count) i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, if thats the case we need to toss it. In fact, we
+ * to toss every packet with the EOP bit clear and the next
+ * frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->discarding = true;
+
+ if (adapter->discarding) {
+ /* All receives must fit into a single buffer */
+ e_dbg("Receive packet consumed multiple buffers\n");
+ /* recycle */
+ buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->discarding = false;
+ goto next_desc;
+ }
+
+ if (unlikely(rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK)) {
+ u8 last_byte = *(skb->data + length - 1);
+ if (TBI_ACCEPT(hw, status, rx_desc->errors, length,
+ last_byte)) {
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ e1000_tbi_adjust_stats(hw, &adapter->stats,
+ length, skb->data);
+ spin_unlock_irqrestore(&adapter->stats_lock,
+ flags);
+ length--;
+ } else {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ /* adjust length to remove Ethernet CRC, this must be
+ * done after the TBI_ACCEPT workaround above */
+ length -= 4;
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ e1000_check_copybreak(netdev, buffer_info, length, &skb);
+
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ e1000_receive_skb(adapter, status, rx_desc->special, skb);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = E1000_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_rx_packets;
+ adapter->total_rx_bytes += total_rx_bytes;
+ netdev->stats.rx_bytes += total_rx_bytes;
+ netdev->stats.rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @rx_ring: pointer to receive ring structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void
+e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring, int cleaned_count)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto check_page;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ e_err(rx_err, "skb align check failed: %u bytes at "
+ "%p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ break; /* while (cleaned_count--) */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+check_page:
+ /* allocate a new page if necessary */
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (unlikely(!buffer_info->page)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
+
+ if (!buffer_info->dma) {
+ buffer_info->dma = dma_map_page(&pdev->dev,
+ buffer_info->page, 0,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ put_page(buffer_info->page);
+ dev_kfree_skb(skb);
+ buffer_info->page = NULL;
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ }
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ struct e1000_rx_ring *rx_ring,
+ int cleaned_count)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ struct sk_buff *oldskb = skb;
+ e_err(rx_err, "skb align check failed: %u bytes at "
+ "%p\n", bufsz, skb->data);
+ /* Try again, without freeing the previous */
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ /* Failed allocation, critical failure */
+ if (!skb) {
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) {
+ /* give up */
+ dev_kfree_skb(skb);
+ dev_kfree_skb(oldskb);
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /* Use new allocation */
+ dev_kfree_skb(oldskb);
+ }
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+ buffer_info->dma = 0;
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+
+ /*
+ * XXX if it was allocated cleanly it will never map to a
+ * boundary crossing
+ */
+
+ /* Fix for errata 23, can't cross 64kB boundary */
+ if (!e1000_check_64k_bound(adapter,
+ (void *)(unsigned long)buffer_info->dma,
+ adapter->rx_buffer_len)) {
+ e_err(rx_err, "dma align check failed: %u bytes at "
+ "%p\n", adapter->rx_buffer_len,
+ (void *)(unsigned long)buffer_info->dma);
+ dev_kfree_skb(skb);
+ buffer_info->skb = NULL;
+
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ adapter->alloc_rx_buff_failed++;
+ break; /* while !buffer_info->skb */
+ }
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, hw->hw_addr + rx_ring->rdt);
+ }
+}
+
+/**
+ * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers.
+ * @adapter:
+ **/
+
+static void e1000_smartspeed(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status;
+ u16 phy_ctrl;
+
+ if ((hw->phy_type != e1000_phy_igp) || !hw->autoneg ||
+ !(hw->autoneg_advertised & ADVERTISE_1000_FULL))
+ return;
+
+ if (adapter->smartspeed == 0) {
+ /* If Master/Slave config fault is asserted twice,
+ * we assume back-to-back */
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_STATUS, &phy_status);
+ if (!(phy_status & SR_1000T_MS_CONFIG_FAULT)) return;
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ if (phy_ctrl & CR_1000T_MS_ENABLE) {
+ phy_ctrl &= ~CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL,
+ phy_ctrl);
+ adapter->smartspeed++;
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL,
+ &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL,
+ phy_ctrl);
+ }
+ }
+ return;
+ } else if (adapter->smartspeed == E1000_SMARTSPEED_DOWNSHIFT) {
+ /* If still no link, perhaps using 2/3 pair cable */
+ e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_ctrl);
+ phy_ctrl |= CR_1000T_MS_ENABLE;
+ e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_ctrl);
+ if (!e1000_phy_setup_autoneg(hw) &&
+ !e1000_read_phy_reg(hw, PHY_CTRL, &phy_ctrl)) {
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN |
+ MII_CR_RESTART_AUTO_NEG);
+ e1000_write_phy_reg(hw, PHY_CTRL, phy_ctrl);
+ }
+ }
+ /* Restart process after E1000_SMARTSPEED_MAX iterations */
+ if (adapter->smartspeed++ == E1000_SMARTSPEED_MAX)
+ adapter->smartspeed = 0;
+}
+
+/**
+ * e1000_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/**
+ * e1000_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct mii_ioctl_data *data = if_mii(ifr);
+ int retval;
+ u16 mii_reg;
+ unsigned long flags;
+
+ if (hw->media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = hw->phy_addr;
+ break;
+ case SIOCGMIIREG:
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_read_phy_reg(hw, data->reg_num & 0x1F,
+ &data->val_out)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ break;
+ case SIOCSMIIREG:
+ if (data->reg_num & ~(0x1F))
+ return -EFAULT;
+ mii_reg = data->val_in;
+ spin_lock_irqsave(&adapter->stats_lock, flags);
+ if (e1000_write_phy_reg(hw, data->reg_num,
+ mii_reg)) {
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ return -EIO;
+ }
+ spin_unlock_irqrestore(&adapter->stats_lock, flags);
+ if (hw->media_type == e1000_media_type_copper) {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (mii_reg & MII_CR_AUTO_NEG_EN) {
+ hw->autoneg = 1;
+ hw->autoneg_advertised = 0x2F;
+ } else {
+ u32 speed;
+ if (mii_reg & 0x40)
+ speed = SPEED_1000;
+ else if (mii_reg & 0x2000)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+ retval = e1000_set_spd_dplx(
+ adapter, speed,
+ ((mii_reg & 0x100)
+ ? DUPLEX_FULL :
+ DUPLEX_HALF));
+ if (retval)
+ return retval;
+ }
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ case M88E1000_PHY_SPEC_CTRL:
+ case M88E1000_EXT_PHY_SPEC_CTRL:
+ if (e1000_phy_reset(hw))
+ return -EIO;
+ break;
+ }
+ } else {
+ switch (data->reg_num) {
+ case PHY_CTRL:
+ if (mii_reg & MII_CR_POWER_DOWN)
+ break;
+ if (netif_running(adapter->netdev))
+ e1000_reinit_locked(adapter);
+ else
+ e1000_reset(adapter);
+ break;
+ }
+ }
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return E1000_SUCCESS;
+}
+
+void e1000_pci_set_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ int ret_val = pci_set_mwi(adapter->pdev);
+
+ if (ret_val)
+ e_err(probe, "Error in setting MWI\n");
+}
+
+void e1000_pci_clear_mwi(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+
+ pci_clear_mwi(adapter->pdev);
+}
+
+int e1000_pcix_get_mmrbc(struct e1000_hw *hw)
+{
+ struct e1000_adapter *adapter = hw->back;
+ return pcix_get_mmrbc(adapter->pdev);
+}
+
+void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc)
+{
+ struct e1000_adapter *adapter = hw->back;
+ pcix_set_mmrbc(adapter->pdev, mmrbc);
+}
+
+void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value)
+{
+ outl(value, port);
+}
+
+static bool e1000_vlan_used(struct e1000_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ return true;
+ return false;
+}
+
+static void e1000_vlan_filter_on_off(struct e1000_adapter *adapter,
+ bool filter_on)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+
+ if (filter_on) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ if (!(adapter->netdev->flags & IFF_PROMISC))
+ rctl |= E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+ e1000_update_mng_vlan(adapter);
+ } else {
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~E1000_RCTL_VFE;
+ ew32(RCTL, rctl);
+ }
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_mode(struct net_device *netdev, u32 features)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+
+ ctrl = er32(CTRL);
+ if (features & NETIF_F_HW_VLAN_RX) {
+ /* enable VLAN tag insert/strip */
+ ctrl |= E1000_CTRL_VME;
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl &= ~E1000_CTRL_VME;
+ }
+ ew32(CTRL, ctrl);
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((hw->mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+
+ if (!e1000_vlan_used(adapter))
+ e1000_vlan_filter_on_off(adapter, true);
+
+ /* add VID to filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_disable(adapter);
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ e1000_irq_enable(adapter);
+
+ /* remove VID from filter table */
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ e1000_write_vfta(hw, index, vfta);
+
+ clear_bit(vid, adapter->active_vlans);
+
+ if (!e1000_vlan_used(adapter))
+ e1000_vlan_filter_on_off(adapter, false);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ u16 vid;
+
+ if (!e1000_vlan_used(adapter))
+ return;
+
+ e1000_vlan_filter_on_off(adapter, true);
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ hw->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((hw->media_type == e1000_media_type_fiber) &&
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_10_half;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_10_full;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ hw->forced_speed_duplex = e1000_100_half;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ hw->forced_speed_duplex = e1000_100_full;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ hw->autoneg = 1;
+ hw->autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+ return 0;
+
+err_inval:
+ e_err(probe, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->flags));
+ e1000_down(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ if (hw->mac_type >= e1000_82540) {
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC |
+ E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+ }
+
+ if (hw->media_type == e1000_media_type_fiber ||
+ hw->media_type == e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP7_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ ew32(WUC, E1000_WUC_PME_EN);
+ ew32(WUFC, wufc);
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ e1000_release_manageability(adapter);
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
+
+ if (netif_running(netdev))
+ e1000_free_irq(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ pr_err("Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ e1000_power_up_phy(adapter);
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev))
+ e1000_up(adapter);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ if (adapter->need_ioport)
+ err = pci_enable_device(pdev);
+ else
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ pr_err("Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000_reset(adapter);
+ ew32(WUS, ~0);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000_init_manageability(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000_up(adapter)) {
+ pr_info("can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+/* e1000_main.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* glue for the OS independent part of e1000
+ * includes register access macros
+ */
+
+#ifndef _E1000_OSDEP_H_
+#define _E1000_OSDEP_H_
+
+#include <asm/io.h>
+
+#define CONFIG_RAM_BASE 0x60000
+#define GBE_CONFIG_OFFSET 0x0
+
+#define GBE_CONFIG_RAM_BASE \
+ ((unsigned int)(CONFIG_RAM_BASE + GBE_CONFIG_OFFSET))
+
+#define GBE_CONFIG_BASE_VIRT \
+ ((void __iomem *)phys_to_virt(GBE_CONFIG_RAM_BASE))
+
+#define GBE_CONFIG_FLASH_WRITE(base, offset, count, data) \
+ (iowrite16_rep(base + offset, data, count))
+
+#define GBE_CONFIG_FLASH_READ(base, offset, count, data) \
+ (ioread16_rep(base + (offset << 1), data, count))
+
+#define er32(reg) \
+ (readl(hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg)))
+
+#define ew32(reg, value) \
+ (writel((value), (hw->hw_addr + ((hw->mac_type >= e1000_82543) \
+ ? E1000_##reg : E1000_82542_##reg))))
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 2)))
+
+#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY
+#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY
+
+#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \
+ writew((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1))))
+
+#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \
+ readw((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ ((offset) << 1)))
+
+#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \
+ writeb((value), ((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset))))
+
+#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \
+ readb((a)->hw_addr + \
+ (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \
+ (offset)))
+
+#define E1000_WRITE_FLUSH() er32(STATUS)
+
+#define E1000_WRITE_ICH_FLASH_REG(a, reg, value) ( \
+ writel((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG(a, reg) ( \
+ readl((a)->flash_address + reg))
+
+#define E1000_WRITE_ICH_FLASH_REG16(a, reg, value) ( \
+ writew((value), ((a)->flash_address + reg)))
+
+#define E1000_READ_ICH_FLASH_REG16(a, reg) ( \
+ readw((a)->flash_address + reg))
+
+#endif /* _E1000_OSDEP_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2006 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 80-256 for 82542 and 82543 gigabit ethernet controllers
+ * Valid Range: 80-4096 for 82544 and newer
+ *
+ * Default Value: 256
+ */
+E1000_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Speed Override
+ *
+ * Valid Range: 0, 10, 100, 1000
+ * - 0 - auto-negotiate at all supported speeds
+ * - 10 - only link at 10 Mbps
+ * - 100 - only link at 100 Mbps
+ * - 1000 - only link at 1000 Mbps
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Speed, "Speed setting");
+
+/* User Specified Duplex Override
+ *
+ * Valid Range: 0-2
+ * - 0 - auto-negotiate for duplex
+ * - 1 - only link at half duplex
+ * - 2 - only link at full duplex
+ *
+ * Default Value: 0
+ */
+E1000_PARAM(Duplex, "Duplex setting");
+
+/* Auto-negotiation Advertisement Override
+ *
+ * Valid Range: 0x01-0x0F, 0x20-0x2F (copper); 0x20 (fiber)
+ *
+ * The AutoNeg value is a bit mask describing which speed and duplex
+ * combinations should be advertised during auto-negotiation.
+ * The supported speed and duplex modes are listed below
+ *
+ * Bit 7 6 5 4 3 2 1 0
+ * Speed (Mbps) N/A N/A 1000 N/A 100 100 10 10
+ * Duplex Full Full Half Full Half
+ *
+ * Default Value: 0x2F (copper); 0x20 (fiber)
+ */
+E1000_PARAM(AutoNeg, "Advertised auto-negotiation setting");
+#define AUTONEG_ADV_DEFAULT 0x2F
+#define AUTONEG_ADV_MASK 0x2F
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: Read flow control settings from the EEPROM
+ */
+E1000_PARAM(FlowControl, "Flow Control setting");
+#define FLOW_CONTROL_DEFAULT FLOW_CONTROL_FULL
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82543 and newer -based NICs
+ *
+ * Default Value: 1
+ */
+E1000_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/* Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/* Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define DEFAULT_RDTR 0
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/* Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define DEFAULT_RADV 8
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/* Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ e_dev_info("%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ e_dev_info("%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ e_dev_info("%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ e_dev_info("%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ e_dev_info("Invalid %s value specified (%i) %s\n",
+ opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+static void e1000_check_fiber_options(struct e1000_adapter *adapter);
+static void e1000_check_copper_options(struct e1000_adapter *adapter);
+
+/**
+ * e1000_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit e1000_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ e_dev_warn("Warning: no configuration for board #%i "
+ "using defaults for all values\n", bd);
+ }
+
+ { /* Transmit Descriptor Count */
+ struct e1000_tx_ring *tx_ring = adapter->tx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_TXD),
+ .def = E1000_DEFAULT_TXD,
+ .arg = { .r = {
+ .min = E1000_MIN_TXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_TXD : E1000_MAX_82544_TXD
+ }}
+ };
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ e1000_validate_option(&tx_ring->count, &opt, adapter);
+ tx_ring->count = ALIGN(tx_ring->count,
+ REQ_TX_DESCRIPTOR_MULTIPLE);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ tx_ring[i].count = tx_ring->count;
+ }
+ { /* Receive Descriptor Count */
+ struct e1000_rx_ring *rx_ring = adapter->rx_ring;
+ int i;
+ e1000_mac_type mac_type = adapter->hw.mac_type;
+
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of "
+ __MODULE_STRING(E1000_DEFAULT_RXD),
+ .def = E1000_DEFAULT_RXD,
+ .arg = { .r = {
+ .min = E1000_MIN_RXD,
+ .max = mac_type < e1000_82544 ? E1000_MAX_RXD : E1000_MAX_82544_RXD
+ }}
+ };
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ e1000_validate_option(&rx_ring->count, &opt, adapter);
+ rx_ring->count = ALIGN(rx_ring->count,
+ REQ_RX_DESCRIPTOR_MULTIPLE);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ rx_ring[i].count = rx_ring->count;
+ }
+ { /* Checksum Offload Enable/Disable */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ e1000_validate_option(&rx_csum, &opt, adapter);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ static const struct e1000_opt_list fc_list[] = {
+ { E1000_FC_NONE, "Flow Control Disabled" },
+ { E1000_FC_RX_PAUSE, "Flow Control Receive Only" },
+ { E1000_FC_TX_PAUSE, "Flow Control Transmit Only" },
+ { E1000_FC_FULL, "Flow Control Enabled" },
+ { E1000_FC_DEFAULT, "Flow Control Hardware Default" }
+ };
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = E1000_FC_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ e1000_validate_option(&fc, &opt, adapter);
+ adapter->hw.fc = adapter->hw.original_fc = fc;
+ } else {
+ adapter->hw.fc = adapter->hw.original_fc = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY }}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY }}
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY }}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY }}
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ opt = (struct e1000_option) {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of " __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR }}
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ e_dev_info("%s turned off\n", opt.name);
+ break;
+ case 1:
+ e_dev_info("%s set to dynamic mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ e_dev_info("%s set to dynamic conservative "
+ "mode\n", opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 4:
+ e_dev_info("%s set to simplified "
+ "(2000-8000) ints mode\n", opt.name);
+ adapter->itr_setting = adapter->itr;
+ break;
+ default:
+ e1000_validate_option(&adapter->itr, &opt,
+ adapter);
+ /* save the setting, because the dynamic bits
+ * change itr.
+ * clear the lower two bits because they are
+ * used as control */
+ adapter->itr_setting = adapter->itr & ~3;
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Smart Power Down */
+ opt = (struct e1000_option) {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ adapter->smart_power_down = spd;
+ } else {
+ adapter->smart_power_down = opt.def;
+ }
+ }
+
+ switch (adapter->hw.media_type) {
+ case e1000_media_type_fiber:
+ case e1000_media_type_internal_serdes:
+ e1000_check_fiber_options(adapter);
+ break;
+ case e1000_media_type_copper:
+ e1000_check_copper_options(adapter);
+ break;
+ default:
+ BUG();
+ }
+}
+
+/**
+ * e1000_check_fiber_options - Range Checking for Link Options, Fiber Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on fiber adapters
+ **/
+
+static void __devinit e1000_check_fiber_options(struct e1000_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (num_Speed > bd) {
+ e_dev_info("Speed not valid for fiber adapters, parameter "
+ "ignored\n");
+ }
+
+ if (num_Duplex > bd) {
+ e_dev_info("Duplex not valid for fiber adapters, parameter "
+ "ignored\n");
+ }
+
+ if ((num_AutoNeg > bd) && (AutoNeg[bd] != 0x20)) {
+ e_dev_info("AutoNeg other than 1000/Full is not valid for fiber"
+ "adapters, parameter ignored\n");
+ }
+}
+
+/**
+ * e1000_check_copper_options - Range Checking for Link Options, Copper Version
+ * @adapter: board private structure
+ *
+ * Handles speed and duplex options on copper adapters
+ **/
+
+static void __devinit e1000_check_copper_options(struct e1000_adapter *adapter)
+{
+ struct e1000_option opt;
+ unsigned int speed, dplx, an;
+ int bd = adapter->bd_number;
+
+ { /* Speed */
+ static const struct e1000_opt_list speed_list[] = {
+ { 0, "" },
+ { SPEED_10, "" },
+ { SPEED_100, "" },
+ { SPEED_1000, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Speed",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(speed_list),
+ .p = speed_list }}
+ };
+
+ if (num_Speed > bd) {
+ speed = Speed[bd];
+ e1000_validate_option(&speed, &opt, adapter);
+ } else {
+ speed = opt.def;
+ }
+ }
+ { /* Duplex */
+ static const struct e1000_opt_list dplx_list[] = {
+ { 0, "" },
+ { HALF_DUPLEX, "" },
+ { FULL_DUPLEX, "" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "Duplex",
+ .err = "parameter ignored",
+ .def = 0,
+ .arg = { .l = { .nr = ARRAY_SIZE(dplx_list),
+ .p = dplx_list }}
+ };
+
+ if (num_Duplex > bd) {
+ dplx = Duplex[bd];
+ e1000_validate_option(&dplx, &opt, adapter);
+ } else {
+ dplx = opt.def;
+ }
+ }
+
+ if ((num_AutoNeg > bd) && (speed != 0 || dplx != 0)) {
+ e_dev_info("AutoNeg specified along with Speed or Duplex, "
+ "parameter ignored\n");
+ adapter->hw.autoneg_advertised = AUTONEG_ADV_DEFAULT;
+ } else { /* Autoneg */
+ static const struct e1000_opt_list an_list[] =
+ #define AA "AutoNeg advertising "
+ {{ 0x01, AA "10/HD" },
+ { 0x02, AA "10/FD" },
+ { 0x03, AA "10/FD, 10/HD" },
+ { 0x04, AA "100/HD" },
+ { 0x05, AA "100/HD, 10/HD" },
+ { 0x06, AA "100/HD, 10/FD" },
+ { 0x07, AA "100/HD, 10/FD, 10/HD" },
+ { 0x08, AA "100/FD" },
+ { 0x09, AA "100/FD, 10/HD" },
+ { 0x0a, AA "100/FD, 10/FD" },
+ { 0x0b, AA "100/FD, 10/FD, 10/HD" },
+ { 0x0c, AA "100/FD, 100/HD" },
+ { 0x0d, AA "100/FD, 100/HD, 10/HD" },
+ { 0x0e, AA "100/FD, 100/HD, 10/FD" },
+ { 0x0f, AA "100/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x20, AA "1000/FD" },
+ { 0x21, AA "1000/FD, 10/HD" },
+ { 0x22, AA "1000/FD, 10/FD" },
+ { 0x23, AA "1000/FD, 10/FD, 10/HD" },
+ { 0x24, AA "1000/FD, 100/HD" },
+ { 0x25, AA "1000/FD, 100/HD, 10/HD" },
+ { 0x26, AA "1000/FD, 100/HD, 10/FD" },
+ { 0x27, AA "1000/FD, 100/HD, 10/FD, 10/HD" },
+ { 0x28, AA "1000/FD, 100/FD" },
+ { 0x29, AA "1000/FD, 100/FD, 10/HD" },
+ { 0x2a, AA "1000/FD, 100/FD, 10/FD" },
+ { 0x2b, AA "1000/FD, 100/FD, 10/FD, 10/HD" },
+ { 0x2c, AA "1000/FD, 100/FD, 100/HD" },
+ { 0x2d, AA "1000/FD, 100/FD, 100/HD, 10/HD" },
+ { 0x2e, AA "1000/FD, 100/FD, 100/HD, 10/FD" },
+ { 0x2f, AA "1000/FD, 100/FD, 100/HD, 10/FD, 10/HD" }};
+
+ opt = (struct e1000_option) {
+ .type = list_option,
+ .name = "AutoNeg",
+ .err = "parameter ignored",
+ .def = AUTONEG_ADV_DEFAULT,
+ .arg = { .l = { .nr = ARRAY_SIZE(an_list),
+ .p = an_list }}
+ };
+
+ if (num_AutoNeg > bd) {
+ an = AutoNeg[bd];
+ e1000_validate_option(&an, &opt, adapter);
+ } else {
+ an = opt.def;
+ }
+ adapter->hw.autoneg_advertised = an;
+ }
+
+ switch (speed + dplx) {
+ case 0:
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ if ((num_Speed > bd) && (speed != 0 || dplx != 0))
+ e_dev_info("Speed and duplex autonegotiation "
+ "enabled\n");
+ break;
+ case HALF_DUPLEX:
+ e_dev_info("Half Duplex specified without Speed\n");
+ e_dev_info("Using Autonegotiation at Half Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_100_HALF;
+ break;
+ case FULL_DUPLEX:
+ e_dev_info("Full Duplex specified without Speed\n");
+ e_dev_info("Using Autonegotiation at Full Duplex only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_FULL |
+ ADVERTISE_100_FULL |
+ ADVERTISE_1000_FULL;
+ break;
+ case SPEED_10:
+ e_dev_info("10 Mbps Speed specified without Duplex\n");
+ e_dev_info("Using Autonegotiation at 10 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_10_HALF |
+ ADVERTISE_10_FULL;
+ break;
+ case SPEED_10 + HALF_DUPLEX:
+ e_dev_info("Forcing to 10 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_10 + FULL_DUPLEX:
+ e_dev_info("Forcing to 10 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_10_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100:
+ e_dev_info("100 Mbps Speed specified without Duplex\n");
+ e_dev_info("Using Autonegotiation at 100 Mbps only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_100_HALF |
+ ADVERTISE_100_FULL;
+ break;
+ case SPEED_100 + HALF_DUPLEX:
+ e_dev_info("Forcing to 100 Mbps Half Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_half;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_100 + FULL_DUPLEX:
+ e_dev_info("Forcing to 100 Mbps Full Duplex\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 0;
+ adapter->hw.forced_speed_duplex = e1000_100_full;
+ adapter->hw.autoneg_advertised = 0;
+ break;
+ case SPEED_1000:
+ e_dev_info("1000 Mbps Speed specified without Duplex\n");
+ goto full_duplex_only;
+ case SPEED_1000 + HALF_DUPLEX:
+ e_dev_info("Half Duplex is not supported at 1000 Mbps\n");
+ /* fall through */
+ case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
+ e_dev_info("Using Autonegotiation at 1000 Mbps Full Duplex "
+ "only\n");
+ adapter->hw.autoneg = adapter->fc_autoneg = 1;
+ adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ default:
+ BUG();
+ }
+
+ /* Speed, AutoNeg and MDI/MDI-X must all play nice */
+ if (e1000_validate_mdi_setting(&(adapter->hw)) < 0) {
+ e_dev_info("Speed, AutoNeg and MDI-X specs are incompatible. "
+ "Setting MDI-X to a compatible value.\n");
+ }
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * 80003ES2LAN Gigabit Ethernet Controller (Copper)
+ * 80003ES2LAN Gigabit Ethernet Controller (Serdes)
+ */
+
+#include "e1000.h"
+
+#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
+#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
+#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
+#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
+
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
+#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
+#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
+
+#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
+#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
+#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
+
+#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
+#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
+
+#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
+#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
+
+#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
+#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
+
+/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
+#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Disab. */
+#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
+#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
+#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
+#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
+
+/* PHY Specific Control Register 2 (Page 0, Register 26) */
+#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000
+ /* 1=Reverse Auto-Negotiation */
+
+/* MAC Specific Control Register (Page 2, Register 21) */
+/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
+#define GG82563_MSCR_TX_CLK_MASK 0x0007
+#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
+#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
+#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
+
+#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
+
+/* DSP Distance Register (Page 5, Register 26) */
+#define GG82563_DSPD_CABLE_LENGTH 0x0007 /* 0 = <50M
+ 1 = 50-80M
+ 2 = 80-110M
+ 3 = 110-140M
+ 4 = >140M */
+
+/* Kumeran Mode Control Register (Page 193, Register 16) */
+#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
+
+/* Max number of times Kumeran read/write should be validated */
+#define GG82563_MAX_KMRN_RETRY 0x5
+
+/* Power Management Control Register (Page 193, Register 20) */
+#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
+ /* 1=Enable SERDES Electrical Idle */
+
+/* In-Band Control Register (Page 194, Register 18) */
+#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
+
+/*
+ * A table for the GG82563 cable length where the range is defined
+ * with a lower bound at "index" and the upper bound at
+ * "index + 5".
+ */
+static const u16 e1000_gg82563_cable_length_table[] = {
+ 0, 60, 115, 150, 150, 60, 115, 150, 180, 180, 0xFF };
+#define GG82563_CABLE_LENGTH_TABLE_SIZE \
+ ARRAY_SIZE(e1000_gg82563_cable_length_table)
+
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask);
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex);
+static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw);
+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 data);
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw);
+
+/**
+ * e1000_init_phy_params_80003es2lan - Init ESB2 PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ return 0;
+ } else {
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_80003es2lan;
+ }
+
+ phy->addr = 1;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+ phy->type = e1000_phy_gg82563;
+
+ /* This can only be done after all function pointers are setup. */
+ ret_val = e1000e_get_phy_id(hw);
+
+ /* Verify phy id */
+ if (phy->id != GG82563_E_PHY_ID)
+ return -E1000_ERR_PHY;
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_nvm_params_80003es2lan - Init ESB2 NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_nvm_params_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u16 size;
+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+
+ nvm->type = e1000_nvm_eeprom_spi;
+
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+
+ /*
+ * Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* EEPROM access above 16k is unsupported */
+ if (size > 14)
+ size = 14;
+ nvm->word_size = 1 << size;
+
+ return 0;
+}
+
+/**
+ * e1000_init_mac_params_80003es2lan - Init ESB2 MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_80003es2lan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_mac_operations *func = &mac->ops;
+
+ /* Set media type */
+ switch (adapter->pdev->device) {
+ case E1000_DEV_ID_80003ES2LAN_SERDES_DPT:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ hw->phy.media_type = e1000_media_type_copper;
+ break;
+ }
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
+ /* FWSM register */
+ mac->has_fwsm = true;
+ /* ARC supported; valid only if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ /* Adaptive IFS not supported */
+ mac->adaptive_ifs = false;
+
+ /* check for link */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ func->setup_physical_interface = e1000_setup_copper_link_80003es2lan;
+ func->check_for_link = e1000e_check_for_copper_link;
+ break;
+ case e1000_media_type_fiber:
+ func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
+ func->check_for_link = e1000e_check_for_fiber_link;
+ break;
+ case e1000_media_type_internal_serdes:
+ func->setup_physical_interface = e1000e_setup_fiber_serdes_link;
+ func->check_for_link = e1000e_check_for_serdes_link;
+ break;
+ default:
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ /* set lan id for port to determine which phy lock to use */
+ hw->mac.ops.set_lan_id(hw);
+
+ return 0;
+}
+
+static s32 e1000_get_variants_80003es2lan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ s32 rc;
+
+ rc = e1000_init_mac_params_80003es2lan(adapter);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_nvm_params_80003es2lan(hw);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_phy_params_80003es2lan(hw);
+ if (rc)
+ return rc;
+
+ return 0;
+}
+
+/**
+ * e1000_acquire_phy_80003es2lan - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to acquire access rights to the correct PHY.
+ **/
+static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ * e1000_release_phy_80003es2lan - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY.
+ **/
+static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+ e1000_release_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ * e1000_acquire_mac_csr_80003es2lan - Acquire rights to access Kumeran register
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the semaphore to access the Kumeran interface.
+ *
+ **/
+static s32 e1000_acquire_mac_csr_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = E1000_SWFW_CSR_SM;
+
+ return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ * e1000_release_mac_csr_80003es2lan - Release rights to access Kumeran Register
+ * @hw: pointer to the HW structure
+ *
+ * Release the semaphore used to access the Kumeran interface
+ **/
+static void e1000_release_mac_csr_80003es2lan(struct e1000_hw *hw)
+{
+ u16 mask;
+
+ mask = E1000_SWFW_CSR_SM;
+
+ e1000_release_swfw_sync_80003es2lan(hw, mask);
+}
+
+/**
+ * e1000_acquire_nvm_80003es2lan - Acquire rights to access NVM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the semaphore to access the EEPROM.
+ **/
+static s32 e1000_acquire_nvm_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = e1000_acquire_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000e_acquire_nvm(hw);
+
+ if (ret_val)
+ e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+
+ return ret_val;
+}
+
+/**
+ * e1000_release_nvm_80003es2lan - Relinquish rights to access NVM
+ * @hw: pointer to the HW structure
+ *
+ * Release the semaphore used to access the EEPROM.
+ **/
+static void e1000_release_nvm_80003es2lan(struct e1000_hw *hw)
+{
+ e1000e_release_nvm(hw);
+ e1000_release_swfw_sync_80003es2lan(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * e1000_acquire_swfw_sync_80003es2lan - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+static s32 e1000_acquire_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 i = 0;
+ s32 timeout = 50;
+
+ while (i < timeout) {
+ if (e1000e_get_hw_semaphore(hw))
+ return -E1000_ERR_SWFW_SYNC;
+
+ swfw_sync = er32(SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
+ e1000e_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ e_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ return -E1000_ERR_SWFW_SYNC;
+ }
+
+ swfw_sync |= swmask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000e_put_hw_semaphore(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_release_swfw_sync_80003es2lan - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+static void e1000_release_swfw_sync_80003es2lan(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (e1000e_get_hw_semaphore(hw) != 0)
+ ; /* Empty */
+
+ swfw_sync = er32(SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ ew32(SW_FW_SYNC, swfw_sync);
+
+ e1000e_put_hw_semaphore(hw);
+}
+
+/**
+ * e1000_read_phy_reg_gg82563_80003es2lan - Read GG82563 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: offset of the register to read
+ * @data: pointer to the data returned from the operation
+ *
+ * Read the GG82563 PHY register.
+ **/
+static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u32 page_select;
+ u16 temp;
+
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Select Configuration Page */
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ page_select = GG82563_PHY_PAGE_SELECT;
+ } else {
+ /*
+ * Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ page_select = GG82563_PHY_PAGE_SELECT_ALT;
+ }
+
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
+ return ret_val;
+ }
+
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ /*
+ * The "ready" bit in the MDIC register may be incorrectly set
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
+ udelay(200);
+
+ /* ...and verify the command was successful. */
+ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ ret_val = -E1000_ERR_PHY;
+ e1000_release_phy_80003es2lan(hw);
+ return ret_val;
+ }
+
+ udelay(200);
+
+ ret_val = e1000e_read_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ udelay(200);
+ } else {
+ ret_val = e1000e_read_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+ }
+
+ e1000_release_phy_80003es2lan(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_phy_reg_gg82563_80003es2lan - Write GG82563 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: offset of the register to read
+ * @data: value to write to the register
+ *
+ * Write to the GG82563 PHY register.
+ **/
+static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
+ u32 offset, u16 data)
+{
+ s32 ret_val;
+ u32 page_select;
+ u16 temp;
+
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Select Configuration Page */
+ if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
+ page_select = GG82563_PHY_PAGE_SELECT;
+ } else {
+ /*
+ * Use Alternative Page Select register to access
+ * registers 30 and 31
+ */
+ page_select = GG82563_PHY_PAGE_SELECT_ALT;
+ }
+
+ temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
+ if (ret_val) {
+ e1000_release_phy_80003es2lan(hw);
+ return ret_val;
+ }
+
+ if (hw->dev_spec.e80003es2lan.mdic_wa_enable == true) {
+ /*
+ * The "ready" bit in the MDIC register may be incorrectly set
+ * before the device has completed the "Page Select" MDI
+ * transaction. So we wait 200us after each MDI command...
+ */
+ udelay(200);
+
+ /* ...and verify the command was successful. */
+ ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
+
+ if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
+ e1000_release_phy_80003es2lan(hw);
+ return -E1000_ERR_PHY;
+ }
+
+ udelay(200);
+
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ udelay(200);
+ } else {
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ MAX_PHY_REG_ADDRESS & offset,
+ data);
+ }
+
+ e1000_release_phy_80003es2lan(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_nvm_80003es2lan - Write to ESB2 NVM
+ * @hw: pointer to the HW structure
+ * @offset: offset of the register to read
+ * @words: number of words to write
+ * @data: buffer of data to write to the NVM
+ *
+ * Write "words" of data to the ESB2 NVM.
+ **/
+static s32 e1000_write_nvm_80003es2lan(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ return e1000e_write_nvm_spi(hw, offset, words, data);
+}
+
+/**
+ * e1000_get_cfg_done_80003es2lan - Wait for configuration to complete
+ * @hw: pointer to the HW structure
+ *
+ * Wait a specific amount of time for manageability processes to complete.
+ * This is a function pointer entry point called by the phy module.
+ **/
+static s32 e1000_get_cfg_done_80003es2lan(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+
+ while (timeout) {
+ if (er32(EEMNGCTL) & mask)
+ break;
+ usleep_range(1000, 2000);
+ timeout--;
+ }
+ if (!timeout) {
+ e_dbg("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_80003es2lan - Force PHY speed and duplex
+ * @hw: pointer to the HW structure
+ *
+ * Force the speed and duplex settings onto the PHY. This is a
+ * function pointer entry point called by the phy module.
+ **/
+static s32 e1000_phy_force_speed_duplex_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~GG82563_PSCR_CROSSOVER_MODE_AUTO;
+ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("GG82563 PSCR: %X\n", phy_data);
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ /* Reset the phy to commit changes. */
+ phy_data |= MII_CR_RESET;
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ if (hw->phy.autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link "
+ "on GG82563 phy.\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link) {
+ /*
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = e1000e_phy_reset_dsp(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Resetting the phy means we need to verify the TX_CLK corresponds
+ * to the link speed. 10Mbps -> 2.5MHz, else 25MHz.
+ */
+ phy_data &= ~GG82563_MSCR_TX_CLK_MASK;
+ if (hw->mac.forced_speed_duplex & E1000_ALL_10_SPEED)
+ phy_data |= GG82563_MSCR_TX_CLK_10MBPS_2_5;
+ else
+ phy_data |= GG82563_MSCR_TX_CLK_100MBPS_25;
+
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ phy_data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+ ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, phy_data);
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_cable_length_80003es2lan - Set approximate cable length
+ * @hw: pointer to the HW structure
+ *
+ * Find the approximate cable length as measured by the GG82563 PHY.
+ * This is a function pointer entry point called by the phy module.
+ **/
+static s32 e1000_get_cable_length_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data, index;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_DSP_DISTANCE, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = phy_data & GG82563_DSPD_CABLE_LENGTH;
+
+ if (index >= GG82563_CABLE_LENGTH_TABLE_SIZE - 5) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_gg82563_cable_length_table[index];
+ phy->max_cable_length = e1000_gg82563_cable_length_table[index + 5];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_link_up_info_80003es2lan - Report speed and duplex
+ * @hw: pointer to the HW structure
+ * @speed: pointer to speed buffer
+ * @duplex: pointer to duplex buffer
+ *
+ * Retrieve the current speed and duplex configuration.
+ **/
+static s32 e1000_get_link_up_info_80003es2lan(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 ret_val;
+
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ ret_val = e1000e_get_speed_and_duplex_copper(hw,
+ speed,
+ duplex);
+ hw->phy.ops.cfg_on_link_up(hw);
+ } else {
+ ret_val = e1000e_get_speed_and_duplex_fiber_serdes(hw,
+ speed,
+ duplex);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_reset_hw_80003es2lan - Reset the ESB2 controller
+ * @hw: pointer to the HW structure
+ *
+ * Perform a global reset to the ESB2 controller.
+ **/
+static s32 e1000_reset_hw_80003es2lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = e1000e_disable_pcie_master(hw);
+ if (ret_val)
+ e_dbg("PCI-E Master disable polling has failed.\n");
+
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ e1e_flush();
+
+ usleep_range(10000, 20000);
+
+ ctrl = er32(CTRL);
+
+ ret_val = e1000_acquire_phy_80003es2lan(hw);
+ e_dbg("Issuing a global reset to MAC\n");
+ ew32(CTRL, ctrl | E1000_CTRL_RST);
+ e1000_release_phy_80003es2lan(hw);
+
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ return ret_val;
+
+ /* Clear any pending interrupt events. */
+ ew32(IMC, 0xffffffff);
+ er32(ICR);
+
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_80003es2lan - Initialize the ESB2 controller
+ * @hw: pointer to the HW structure
+ *
+ * Initialize the hw bits, LED, VFTA, MTA, link and hw counters.
+ **/
+static s32 e1000_init_hw_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 reg_data;
+ s32 ret_val;
+ u16 kum_reg_data;
+ u16 i;
+
+ e1000_initialize_hw_bits_80003es2lan(hw);
+
+ /* Initialize identification LED */
+ ret_val = e1000e_id_led_init(hw);
+ if (ret_val)
+ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+
+ /* Disabling VLAN filtering */
+ e_dbg("Initializing the IEEE VLAN\n");
+ mac->ops.clear_vfta(hw);
+
+ /* Setup the receive address. */
+ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+
+ /* Zero out the Multicast HASH table */
+ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = e1000e_setup_link(hw);
+
+ /* Disable IBIST slave mode (far-end loopback) */
+ e1000_read_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ &kum_reg_data);
+ kum_reg_data |= E1000_KMRNCTRLSTA_IBIST_DISABLE;
+ e1000_write_kmrn_reg_80003es2lan(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ kum_reg_data);
+
+ /* Set the transmit descriptor write-back policy */
+ reg_data = er32(TXDCTL(0));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL(0), reg_data);
+
+ /* ...for both queues. */
+ reg_data = er32(TXDCTL(1));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL(1), reg_data);
+
+ /* Enable retransmit on late collisions */
+ reg_data = er32(TCTL);
+ reg_data |= E1000_TCTL_RTLC;
+ ew32(TCTL, reg_data);
+
+ /* Configure Gigabit Carry Extend Padding */
+ reg_data = er32(TCTL_EXT);
+ reg_data &= ~E1000_TCTL_EXT_GCEX_MASK;
+ reg_data |= DEFAULT_TCTL_EXT_GCEX_80003ES2LAN;
+ ew32(TCTL_EXT, reg_data);
+
+ /* Configure Transmit Inter-Packet Gap */
+ reg_data = er32(TIPG);
+ reg_data &= ~E1000_TIPG_IPGT_MASK;
+ reg_data |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
+ ew32(TIPG, reg_data);
+
+ reg_data = E1000_READ_REG_ARRAY(hw, E1000_FFLT, 0x0001);
+ reg_data &= ~0x00100000;
+ E1000_WRITE_REG_ARRAY(hw, E1000_FFLT, 0x0001, reg_data);
+
+ /* default to true to enable the MDIC W/A */
+ hw->dev_spec.e80003es2lan.mdic_wa_enable = true;
+
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET >>
+ E1000_KMRNCTRLSTA_OFFSET_SHIFT,
+ &i);
+ if (!ret_val) {
+ if ((i & E1000_KMRNCTRLSTA_OPMODE_MASK) ==
+ E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO)
+ hw->dev_spec.e80003es2lan.mdic_wa_enable = false;
+ }
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs_80003es2lan(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_initialize_hw_bits_80003es2lan - Init hw bits of ESB2
+ * @hw: pointer to the HW structure
+ *
+ * Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void e1000_initialize_hw_bits_80003es2lan(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ /* Transmit Descriptor Control 0 */
+ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
+ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
+ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
+ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
+ reg = er32(TARC(0));
+ reg &= ~(0xF << 27); /* 30:27 */
+ if (hw->phy.media_type != e1000_media_type_copper)
+ reg &= ~(1 << 20);
+ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
+ reg = er32(TARC(1));
+ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
+ ew32(TARC(1), reg);
+}
+
+/**
+ * e1000_copper_link_setup_gg82563_80003es2lan - Configure GG82563 Link
+ * @hw: pointer to the HW structure
+ *
+ * Setup some GG82563 PHY registers for obtaining link
+ **/
+static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl_ext;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= GG82563_MSCR_ASSERT_CRS_ON_TX;
+ /* Use 25MHz for both link down and 1000Base-T for Tx clock. */
+ data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
+
+ ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~GG82563_PSCR_CROSSOVER_MODE_MASK;
+
+ switch (phy->mdix) {
+ case 1:
+ data |= GG82563_PSCR_CROSSOVER_MODE_MDI;
+ break;
+ case 2:
+ data |= GG82563_PSCR_CROSSOVER_MODE_MDIX;
+ break;
+ case 0:
+ default:
+ data |= GG82563_PSCR_CROSSOVER_MODE_AUTO;
+ break;
+ }
+
+ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ data &= ~GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+ if (phy->disable_polarity_correction)
+ data |= GG82563_PSCR_POLARITY_REVERSAL_DISABLE;
+
+ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL, data);
+ if (ret_val)
+ return ret_val;
+
+ /* SW Reset the PHY so all changes take effect */
+ ret_val = e1000e_commit_phy(hw);
+ if (ret_val) {
+ e_dbg("Error Resetting the PHY\n");
+ return ret_val;
+ }
+
+ /* Bypass Rx and Tx FIFO's */
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL,
+ E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS |
+ E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ &data);
+ if (ret_val)
+ return ret_val;
+ data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
+ data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~GG82563_PSCR2_REVERSE_AUTO_NEG;
+ ret_val = e1e_wphy(hw, GG82563_PHY_SPEC_CTRL_2, data);
+ if (ret_val)
+ return ret_val;
+
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext &= ~(E1000_CTRL_EXT_LINK_MODE_MASK);
+ ew32(CTRL_EXT, ctrl_ext);
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_PWR_MGMT_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Do not init these registers when the HW is in IAMT mode, since the
+ * firmware will have already initialized them. We only initialize
+ * them if the HW is not in IAMT mode.
+ */
+ if (!e1000e_check_mng_mode(hw)) {
+ /* Enable Electrical Idle on the PHY */
+ data |= GG82563_PMCR_ENABLE_ELECTRICAL_IDLE;
+ ret_val = e1e_wphy(hw, GG82563_PHY_PWR_MGMT_CTRL, data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /*
+ * Workaround: Disable padding in Kumeran interface in the MAC
+ * and in the PHY to avoid CRC errors.
+ */
+ ret_val = e1e_rphy(hw, GG82563_PHY_INBAND_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= GG82563_ICR_DIS_PADDING;
+ ret_val = e1e_wphy(hw, GG82563_PHY_INBAND_CTRL, data);
+ if (ret_val)
+ return ret_val;
+
+ return 0;
+}
+
+/**
+ * e1000_setup_copper_link_80003es2lan - Setup Copper Link for ESB2
+ * @hw: pointer to the HW structure
+ *
+ * Essentially a wrapper for setting up all things "copper" related.
+ * This is a function pointer entry point called by the mac module.
+ **/
+static s32 e1000_setup_copper_link_80003es2lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 reg_data;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ /*
+ * Set the mac to wait the maximum time between each
+ * iteration and increase the max iterations when
+ * polling the phy; this fixes erroneous timeouts at 10Mbps.
+ */
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 4),
+ 0xFFFF);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
+ ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= 0x3F;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw, GG82563_REG(0x34, 9),
+ reg_data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000_read_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_INB_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000_copper_link_setup_gg82563_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000e_setup_copper_link(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_cfg_on_link_up_80003es2lan - es2 link configuration after link-up
+ * @hw: pointer to the HW structure
+ * @duplex: current duplex setting
+ *
+ * Configure the KMRN interface by applying last minute quirks for
+ * 10/100 operation.
+ **/
+static s32 e1000_cfg_on_link_up_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 speed;
+ u16 duplex;
+
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ ret_val = e1000e_get_speed_and_duplex_copper(hw, &speed,
+ &duplex);
+ if (ret_val)
+ return ret_val;
+
+ if (speed == SPEED_1000)
+ ret_val = e1000_cfg_kmrn_1000_80003es2lan(hw);
+ else
+ ret_val = e1000_cfg_kmrn_10_100_80003es2lan(hw, duplex);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_cfg_kmrn_10_100_80003es2lan - Apply "quirks" for 10/100 operation
+ * @hw: pointer to the HW structure
+ * @duplex: current duplex setting
+ *
+ * Configure the KMRN interface by applying last minute quirks for
+ * 10/100 operation.
+ **/
+static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
+{
+ s32 ret_val;
+ u32 tipg;
+ u32 i = 0;
+ u16 reg_data, reg_data2;
+
+ reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
+ ew32(TIPG, tipg);
+
+ do {
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
+ if (ret_val)
+ return ret_val;
+ i++;
+ } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
+
+ if (duplex == HALF_DUPLEX)
+ reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
+ else
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+
+ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return 0;
+}
+
+/**
+ * e1000_cfg_kmrn_1000_80003es2lan - Apply "quirks" for gigabit operation
+ * @hw: pointer to the HW structure
+ *
+ * Configure the KMRN interface by applying last minute quirks for
+ * gigabit operation.
+ **/
+static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 reg_data, reg_data2;
+ u32 tipg;
+ u32 i = 0;
+
+ reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
+ ret_val = e1000_write_kmrn_reg_80003es2lan(hw,
+ E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Configure Transmit Inter-Packet Gap */
+ tipg = er32(TIPG);
+ tipg &= ~E1000_TIPG_IPGT_MASK;
+ tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
+ ew32(TIPG, tipg);
+
+ do {
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, ®_data2);
+ if (ret_val)
+ return ret_val;
+ i++;
+ } while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
+
+ reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
+ ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
+
+ return ret_val;
+}
+
+/**
+ * e1000_read_kmrn_reg_80003es2lan - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquire semaphore, then read the PHY register at offset
+ * using the kumeran interface. The information retrieved is stored in data.
+ * Release the semaphore before exiting.
+ **/
+static s32 e1000_read_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = 0;
+
+ ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ ew32(KMRNCTRLSTA, kmrnctrlsta);
+ e1e_flush();
+
+ udelay(2);
+
+ kmrnctrlsta = er32(KMRNCTRLSTA);
+ *data = (u16)kmrnctrlsta;
+
+ e1000_release_mac_csr_80003es2lan(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_kmrn_reg_80003es2lan - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquire semaphore, then write the data to PHY register
+ * at the offset using the kumeran interface. Release semaphore
+ * before exiting.
+ **/
+static s32 e1000_write_kmrn_reg_80003es2lan(struct e1000_hw *hw, u32 offset,
+ u16 data)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = 0;
+
+ ret_val = e1000_acquire_mac_csr_80003es2lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | data;
+ ew32(KMRNCTRLSTA, kmrnctrlsta);
+ e1e_flush();
+
+ udelay(2);
+
+ e1000_release_mac_csr_80003es2lan(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_read_mac_addr_80003es2lan - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_80003es2lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_power_down_phy_copper_80003es2lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_80003es2lan(struct e1000_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(hw->mac.ops.check_mng_mode(hw) ||
+ hw->phy.ops.check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+}
+
+/**
+ * e1000_clear_hw_cntrs_80003es2lan - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_80003es2lan(struct e1000_hw *hw)
+{
+ e1000e_clear_hw_cntrs_base(hw);
+
+ er32(PRC64);
+ er32(PRC127);
+ er32(PRC255);
+ er32(PRC511);
+ er32(PRC1023);
+ er32(PRC1522);
+ er32(PTC64);
+ er32(PTC127);
+ er32(PTC255);
+ er32(PTC511);
+ er32(PTC1023);
+ er32(PTC1522);
+
+ er32(ALGNERRC);
+ er32(RXERRC);
+ er32(TNCRS);
+ er32(CEXTERR);
+ er32(TSCTC);
+ er32(TSCTFC);
+
+ er32(MGTPRC);
+ er32(MGTPDC);
+ er32(MGTPTC);
+
+ er32(IAC);
+ er32(ICRXOC);
+
+ er32(ICRXPTC);
+ er32(ICRXATC);
+ er32(ICTXPTC);
+ er32(ICTXATC);
+ er32(ICTXQEC);
+ er32(ICTXQMTC);
+ er32(ICRXDMTC);
+}
+
+static struct e1000_mac_operations es2_mac_ops = {
+ .read_mac_addr = e1000_read_mac_addr_80003es2lan,
+ .id_led_init = e1000e_id_led_init,
+ .blink_led = e1000e_blink_led_generic,
+ .check_mng_mode = e1000e_check_mng_mode_generic,
+ /* check_for_link dependent on media type */
+ .cleanup_led = e1000e_cleanup_led_generic,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_80003es2lan,
+ .get_bus_info = e1000e_get_bus_info_pcie,
+ .set_lan_id = e1000_set_lan_id_multi_port_pcie,
+ .get_link_up_info = e1000_get_link_up_info_80003es2lan,
+ .led_on = e1000e_led_on_generic,
+ .led_off = e1000e_led_off_generic,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .write_vfta = e1000_write_vfta_generic,
+ .clear_vfta = e1000_clear_vfta_generic,
+ .reset_hw = e1000_reset_hw_80003es2lan,
+ .init_hw = e1000_init_hw_80003es2lan,
+ .setup_link = e1000e_setup_link,
+ /* setup_physical_interface dependent on media type */
+ .setup_led = e1000e_setup_led_generic,
+};
+
+static struct e1000_phy_operations es2_phy_ops = {
+ .acquire = e1000_acquire_phy_80003es2lan,
+ .check_polarity = e1000_check_polarity_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000_phy_force_speed_duplex_80003es2lan,
+ .get_cfg_done = e1000_get_cfg_done_80003es2lan,
+ .get_cable_length = e1000_get_cable_length_80003es2lan,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000_read_phy_reg_gg82563_80003es2lan,
+ .release = e1000_release_phy_80003es2lan,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = NULL,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000_write_phy_reg_gg82563_80003es2lan,
+ .cfg_on_link_up = e1000_cfg_on_link_up_80003es2lan,
+};
+
+static struct e1000_nvm_operations es2_nvm_ops = {
+ .acquire = e1000_acquire_nvm_80003es2lan,
+ .read = e1000e_read_nvm_eerd,
+ .release = e1000_release_nvm_80003es2lan,
+ .update = e1000e_update_nvm_checksum_generic,
+ .valid_led_default = e1000e_valid_led_default,
+ .validate = e1000e_validate_nvm_checksum_generic,
+ .write = e1000_write_nvm_80003es2lan,
+};
+
+struct e1000_info e1000_es2_info = {
+ .mac = e1000_80003es2lan,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_RX_NEEDS_RESTART /* errata */
+ | FLAG_TARC_SET_BIT_ZERO /* errata */
+ | FLAG_APME_CHECK_PORT_B
+ | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+ | FLAG_TIPG_MEDIUM_FOR_80003ESLAN,
+ .flags2 = FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_80003es2lan,
+ .mac_ops = &es2_mac_ops,
+ .phy_ops = &es2_phy_ops,
+ .nvm_ops = &es2_nvm_ops,
+};
+
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * 82571EB Gigabit Ethernet Controller
+ * 82571EB Gigabit Ethernet Controller (Copper)
+ * 82571EB Gigabit Ethernet Controller (Fiber)
+ * 82571EB Dual Port Gigabit Mezzanine Adapter
+ * 82571EB Quad Port Gigabit Mezzanine Adapter
+ * 82571PT Gigabit PT Quad Port Server ExpressModule
+ * 82572EI Gigabit Ethernet Controller (Copper)
+ * 82572EI Gigabit Ethernet Controller (Fiber)
+ * 82572EI Gigabit Ethernet Controller
+ * 82573V Gigabit Ethernet Controller (Copper)
+ * 82573E Gigabit Ethernet Controller (Copper)
+ * 82573L Gigabit Ethernet Controller
+ * 82574L Gigabit Network Connection
+ * 82583V Gigabit Network Connection
+ */
+
+#include "e1000.h"
+
+#define ID_LED_RESERVED_F746 0xF746
+#define ID_LED_DEFAULT_82573 ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_OFF1_ON2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
+#define AN_RETRY_COUNT 5 /* Autoneg Retry Count value */
+#define E1000_BASE1000T_STATUS 10
+#define E1000_IDLE_ERROR_COUNT_MASK 0xFF
+#define E1000_RECEIVE_ERROR_COUNTER 21
+#define E1000_RECEIVE_ERROR_MAX 0xFFFF
+
+#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
+
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
+static s32 e1000_setup_link_82571(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static void e1000_clear_vfta_82571(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
+static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
+
+/**
+ * e1000_init_phy_params_82571 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ return 0;
+ }
+
+ phy->addr = 1;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_82571;
+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ phy->type = e1000_phy_igp_2;
+ break;
+ case e1000_82573:
+ phy->type = e1000_phy_m88;
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ phy->type = e1000_phy_bm;
+ phy->ops.acquire = e1000_get_hw_semaphore_82574;
+ phy->ops.release = e1000_put_hw_semaphore_82574;
+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+
+ /* This can only be done after all function pointers are setup. */
+ ret_val = e1000_get_phy_id_82571(hw);
+ if (ret_val) {
+ e_dbg("Error getting PHY ID\n");
+ return ret_val;
+ }
+
+ /* Verify phy id */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (phy->id != IGP01E1000_I_PHY_ID)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ case e1000_82573:
+ if (phy->id != M88E1111_I_PHY_ID)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ if (phy->id != BME1000_E_PHY_ID_R2)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_nvm_params_82571 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u16 size;
+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (((eecd >> 15) & 0x3) == 0x3) {
+ nvm->type = e1000_nvm_flash_hw;
+ nvm->word_size = 2048;
+ /*
+ * Autonomous Flash update bit must be cleared due
+ * to Flash update issue.
+ */
+ eecd &= ~E1000_EECD_AUPDEN;
+ ew32(EECD, eecd);
+ break;
+ }
+ /* Fall Through */
+ default:
+ nvm->type = e1000_nvm_eeprom_spi;
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+ /*
+ * Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* EEPROM access above 16k is unsupported */
+ if (size > 14)
+ size = 14;
+ nvm->word_size = 1 << size;
+ break;
+ }
+
+ /* Function Pointers */
+ switch (hw->mac.type) {
+ case e1000_82574:
+ case e1000_82583:
+ nvm->ops.acquire = e1000_get_hw_semaphore_82574;
+ nvm->ops.release = e1000_put_hw_semaphore_82574;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_init_mac_params_82571 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_82571(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_mac_operations *func = &mac->ops;
+ u32 swsm = 0;
+ u32 swsm2 = 0;
+ bool force_clear_smbi = false;
+
+ /* Set media type */
+ switch (adapter->pdev->device) {
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ hw->phy.media_type = e1000_media_type_fiber;
+ break;
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82572EI_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ hw->phy.media_type = e1000_media_type_copper;
+ break;
+ }
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
+
+ /* check for link */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ func->setup_physical_interface = e1000_setup_copper_link_82571;
+ func->check_for_link = e1000e_check_for_copper_link;
+ func->get_link_up_info = e1000e_get_speed_and_duplex_copper;
+ break;
+ case e1000_media_type_fiber:
+ func->setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ func->check_for_link = e1000e_check_for_fiber_link;
+ func->get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
+ break;
+ case e1000_media_type_internal_serdes:
+ func->setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ func->check_for_link = e1000_check_for_serdes_link_82571;
+ func->get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
+ break;
+ default:
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ func->set_lan_id = e1000_set_lan_id_single_port;
+ func->check_mng_mode = e1000e_check_mng_mode_generic;
+ func->led_on = e1000e_led_on_generic;
+ func->blink_led = e1000e_blink_led_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
+ /*
+ * ARC supported; valid only if manageability features are
+ * enabled.
+ */
+ mac->arc_subsystem_valid =
+ (er32(FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ func->set_lan_id = e1000_set_lan_id_single_port;
+ func->check_mng_mode = e1000_check_mng_mode_82574;
+ func->led_on = e1000_led_on_82574;
+ break;
+ default:
+ func->check_mng_mode = e1000e_check_mng_mode_generic;
+ func->led_on = e1000e_led_on_generic;
+ func->blink_led = e1000e_blink_led_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
+ break;
+ }
+
+ /*
+ * Ensure that the inter-port SWSM.SMBI lock bit is clear before
+ * first NVM or PHY access. This should be done for single-port
+ * devices, and for one port only on dual-port devices so that
+ * for those devices we can still use the SMBI lock to synchronize
+ * inter-port accesses to the PHY & NVM.
+ */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ swsm2 = er32(SWSM2);
+
+ if (!(swsm2 & E1000_SWSM2_LOCK)) {
+ /* Only do this for the first interface on this card */
+ ew32(SWSM2,
+ swsm2 | E1000_SWSM2_LOCK);
+ force_clear_smbi = true;
+ } else
+ force_clear_smbi = false;
+ break;
+ default:
+ force_clear_smbi = true;
+ break;
+ }
+
+ if (force_clear_smbi) {
+ /* Make sure SWSM.SMBI is clear */
+ swsm = er32(SWSM);
+ if (swsm & E1000_SWSM_SMBI) {
+ /* This bit should not be set on a first interface, and
+ * indicates that the bootagent or EFI code has
+ * improperly left this bit enabled
+ */
+ e_dbg("Please update your 82571 Bootagent\n");
+ }
+ ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
+ }
+
+ /*
+ * Initialize device specific counter of SMBI acquisition
+ * timeouts.
+ */
+ hw->dev_spec.e82571.smb_counter = 0;
+
+ return 0;
+}
+
+static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static int global_quad_port_a; /* global port a indication */
+ struct pci_dev *pdev = adapter->pdev;
+ int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
+ s32 rc;
+
+ rc = e1000_init_mac_params_82571(adapter);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_nvm_params_82571(hw);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_phy_params_82571(hw);
+ if (rc)
+ return rc;
+
+ /* tag quad port adapters first, it's used below */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ adapter->flags |= FLAG_IS_QUAD_PORT;
+ /* mark the first port */
+ if (global_quad_port_a == 0)
+ adapter->flags |= FLAG_IS_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ global_quad_port_a++;
+ if (global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ break;
+ }
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82571:
+ /* these dual ports don't have WoL on port B at all */
+ if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
+ (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
+ (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
+ (is_port_b))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* quad ports only support WoL on port A */
+ if (adapter->flags & FLAG_IS_QUAD_PORT &&
+ (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* Does not support WoL on any port */
+ if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+ adapter->flags &= ~FLAG_HAS_WOL;
+ break;
+ case e1000_82573:
+ if (pdev->device == E1000_DEV_ID_82573L) {
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = DEFAULT_JUMBO;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_id = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ /*
+ * The 82571 firmware may still be configuring the PHY.
+ * In this case, we cannot access the PHY until the
+ * configuration is done. So we explicitly set the
+ * PHY ID.
+ */
+ phy->id = IGP01E1000_I_PHY_ID;
+ break;
+ case e1000_82573:
+ return e1000e_get_phy_id(hw);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id |= (u32)(phy_id);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 sw_timeout = hw->nvm.word_size + 1;
+ s32 fw_timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /*
+ * If we have timedout 3 times on trying to acquire
+ * the inter-port SMBI semaphore, there is old code
+ * operating on the other port, and it is not
+ * releasing SMBI. Modify the number of times that
+ * we try for the semaphore to interwork with this
+ * older code.
+ */
+ if (hw->dev_spec.e82571.smb_counter > 2)
+ sw_timeout = 1;
+
+ /* Get the SW semaphore */
+ while (i < sw_timeout) {
+ swsm = er32(SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == sw_timeout) {
+ e_dbg("Driver can't access device - SMBI bit is set.\n");
+ hw->dev_spec.e82571.smb_counter++;
+ }
+ /* Get the FW semaphore. */
+ for (i = 0; i < fw_timeout; i++) {
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (er32(SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == fw_timeout) {
+ /* Release semaphores */
+ e1000_put_hw_semaphore_82571(hw);
+ e_dbg("Driver can't access the NVM\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_put_hw_semaphore_82571 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = er32(SWSM);
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ ew32(SWSM, swsm);
+}
+/**
+ * e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore during reset.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+ s32 ret_val = 0;
+ s32 i = 0;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+ do {
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+
+ usleep_range(2000, 4000);
+ i++;
+ } while (i < MDIO_OWNERSHIP_TIMEOUT);
+
+ if (i == MDIO_OWNERSHIP_TIMEOUT) {
+ /* Release semaphores */
+ e1000_put_hw_semaphore_82573(hw);
+ e_dbg("Driver can't access the PHY\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_put_hw_semaphore_82573 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used during reset.
+ *
+ **/
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ mutex_lock(&swflag_mutex);
+ ret_val = e1000_get_hw_semaphore_82573(hw);
+ if (ret_val)
+ mutex_unlock(&swflag_mutex);
+ return ret_val;
+}
+
+/**
+ * e1000_put_hw_semaphore_82574 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ *
+ **/
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
+{
+ e1000_put_hw_semaphore_82573(hw);
+ mutex_unlock(&swflag_mutex);
+}
+
+/**
+ * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag.
+ * LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+ u16 data = er32(POEMB);
+
+ if (active)
+ data |= E1000_PHY_CTRL_D0A_LPLU;
+ else
+ data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+ ew32(POEMB, data);
+ return 0;
+}
+
+/**
+ * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * when active is true, else clear lplu for D3. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+ u16 data = er32(POEMB);
+
+ if (!active) {
+ data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= E1000_PHY_CTRL_NOND0A_LPLU;
+ }
+
+ ew32(POEMB, data);
+ return 0;
+}
+
+/**
+ * e1000_acquire_nvm_82571 - Request for access to the EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * To gain access to the EEPROM, first we must obtain a hardware semaphore.
+ * Then for non-82573 hardware, set the EEPROM access request bit and wait
+ * for EEPROM access grant bit. If the access grant bit is not set, release
+ * hardware semaphore.
+ **/
+static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = e1000_get_hw_semaphore_82571(hw);
+ if (ret_val)
+ return ret_val;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ break;
+ default:
+ ret_val = e1000e_acquire_nvm(hw);
+ break;
+ }
+
+ if (ret_val)
+ e1000_put_hw_semaphore_82571(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_release_nvm_82571 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+static void e1000_release_nvm_82571(struct e1000_hw *hw)
+{
+ e1000e_release_nvm(hw);
+ e1000_put_hw_semaphore_82571(hw);
+}
+
+/**
+ * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * For non-82573 silicon, write data to EEPROM at offset using SPI interface.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 ret_val;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
+ break;
+ default:
+ ret_val = -E1000_ERR_NVM;
+ break;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_update_nvm_checksum_82571 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ u32 eecd;
+ s32 ret_val;
+ u16 i;
+
+ ret_val = e1000e_update_nvm_checksum_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * If our nvm is an EEPROM, then we're done
+ * otherwise, commit the checksum to the flash NVM.
+ */
+ if (hw->nvm.type != e1000_nvm_flash_hw)
+ return ret_val;
+
+ /* Check for pending operations. */
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+ usleep_range(1000, 2000);
+ if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ break;
+ }
+
+ if (i == E1000_FLASH_UPDATES)
+ return -E1000_ERR_NVM;
+
+ /* Reset the firmware if using STM opcode. */
+ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
+ /*
+ * The enabling of and the actual reset must be done
+ * in two write cycles.
+ */
+ ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
+ e1e_flush();
+ ew32(HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Commit the write to flash */
+ eecd = er32(EECD) | E1000_EECD_FLUPD;
+ ew32(EECD, eecd);
+
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+ usleep_range(1000, 2000);
+ if ((er32(EECD) & E1000_EECD_FLUPD) == 0)
+ break;
+ }
+
+ if (i == E1000_FLASH_UPDATES)
+ return -E1000_ERR_NVM;
+
+ return 0;
+}
+
+/**
+ * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ if (hw->nvm.type == e1000_nvm_flash_hw)
+ e1000_fix_nvm_checksum_82571(hw);
+
+ return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * After checking for invalid values, poll the EEPROM to ensure the previous
+ * command has completed before trying to write the next word. After write
+ * poll for completion.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eewr = 0;
+ s32 ret_val = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = (data[i] << E1000_NVM_RW_REG_DATA) |
+ ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) |
+ E1000_NVM_RW_REG_START;
+
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+
+ ew32(EEWR, eewr);
+
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_cfg_done_82571 - Poll for configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Reads the management control register for the config done bit to be set.
+ **/
+static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+
+ while (timeout) {
+ if (er32(EEMNGCTL) &
+ E1000_NVM_CFG_DONE_PORT_0)
+ break;
+ usleep_range(1000, 2000);
+ timeout--;
+ }
+ if (!timeout) {
+ e_dbg("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When activating LPLU
+ * this function also disables smart speed and vice versa. LPLU will not be
+ * activated unless the device autonegotiation advertisement meets standards
+ * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function
+ * pointer entry point only called by PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_reset_hw_82571 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state.
+ **/
+static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext;
+ s32 ret_val;
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = e1000e_disable_pcie_master(hw);
+ if (ret_val)
+ e_dbg("PCI-E Master disable polling has failed.\n");
+
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ e1e_flush();
+
+ usleep_range(10000, 20000);
+
+ /*
+ * Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset.
+ */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ ret_val = e1000_get_hw_semaphore_82573(hw);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1000_get_hw_semaphore_82574(hw);
+ break;
+ default:
+ break;
+ }
+ if (ret_val)
+ e_dbg("Cannot acquire MDIO ownership\n");
+
+ ctrl = er32(CTRL);
+
+ e_dbg("Issuing a global reset to MAC\n");
+ ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+ /* Must release MDIO ownership and mutex after MAC reset. */
+ switch (hw->mac.type) {
+ case e1000_82574:
+ case e1000_82583:
+ e1000_put_hw_semaphore_82574(hw);
+ break;
+ default:
+ break;
+ }
+
+ if (hw->nvm.type == e1000_nvm_flash_hw) {
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+ }
+
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ return ret_val;
+
+ /*
+ * Phy configuration from NVM just starts after EECD_AUTO_RD is set.
+ * Need to wait for Phy configuration completion before accessing
+ * NVM and Phy.
+ */
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ msleep(25);
+ break;
+ default:
+ break;
+ }
+
+ /* Clear any pending interrupt events. */
+ ew32(IMC, 0xffffffff);
+ er32(ICR);
+
+ if (hw->mac.type == e1000_82571) {
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_set_laa_state_82571(hw, true);
+ }
+
+ /* Reinitialize the 82571 serdes link state machine */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ hw->mac.serdes_link_state = e1000_serdes_link_down;
+
+ return 0;
+}
+
+/**
+ * e1000_init_hw_82571 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 e1000_init_hw_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 reg_data;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ e1000_initialize_hw_bits_82571(hw);
+
+ /* Initialize identification LED */
+ ret_val = e1000e_id_led_init(hw);
+ if (ret_val)
+ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+
+ /* Disabling VLAN filtering */
+ e_dbg("Initializing the IEEE VLAN\n");
+ mac->ops.clear_vfta(hw);
+
+ /* Setup the receive address. */
+ /*
+ * If, however, a locally administered address was assigned to the
+ * 82571, we must reserve a RAR for it to work around an issue where
+ * resetting one port will reload the MAC on the other port.
+ */
+ if (e1000e_get_laa_state_82571(hw))
+ rar_count--;
+ e1000e_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = e1000_setup_link_82571(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ reg_data = er32(TXDCTL(0));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL(0), reg_data);
+
+ /* ...for both queues. */
+ switch (mac->type) {
+ case e1000_82573:
+ e1000e_enable_tx_pkt_filtering(hw);
+ /* fall through */
+ case e1000_82574:
+ case e1000_82583:
+ reg_data = er32(GCR);
+ reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+ ew32(GCR, reg_data);
+ break;
+ default:
+ reg_data = er32(TXDCTL(1));
+ reg_data = (reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC;
+ ew32(TXDCTL(1), reg_data);
+ break;
+ }
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs_82571(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
+ * @hw: pointer to the HW structure
+ *
+ * Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ /* Transmit Descriptor Control 0 */
+ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
+ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
+ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
+ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
+ reg = er32(TARC(0));
+ reg &= ~(0xF << 27); /* 30:27 */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ reg |= (1 << 23) | (1 << 24) | (1 << 25) | (1 << 26);
+ break;
+ default:
+ break;
+ }
+ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
+ reg = er32(TARC(1));
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ reg &= ~((1 << 29) | (1 << 30));
+ reg |= (1 << 22) | (1 << 24) | (1 << 25) | (1 << 26);
+ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
+ ew32(TARC(1), reg);
+ break;
+ default:
+ break;
+ }
+
+ /* Device Control */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(CTRL);
+ reg &= ~(1 << 29);
+ ew32(CTRL, reg);
+ break;
+ default:
+ break;
+ }
+
+ /* Extended Device Control */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(CTRL_EXT);
+ reg &= ~(1 << 23);
+ reg |= (1 << 22);
+ ew32(CTRL_EXT, reg);
+ break;
+ default:
+ break;
+ }
+
+ if (hw->mac.type == e1000_82571) {
+ reg = er32(PBA_ECC);
+ reg |= E1000_PBA_ECC_CORR_EN;
+ ew32(PBA_ECC, reg);
+ }
+ /*
+ * Workaround for hardware errata.
+ * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
+ */
+
+ if ((hw->mac.type == e1000_82571) ||
+ (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
+
+
+ /* PCI-Ex Control Registers */
+ switch (hw->mac.type) {
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(GCR);
+ reg |= (1 << 22);
+ ew32(GCR, reg);
+
+ /*
+ * Workaround for hardware errata.
+ * apply workaround for hardware errata documented in errata
+ * docs Fixes issue where some error prone or unreliable PCIe
+ * completions are occurring, particularly with ASPM enabled.
+ * Without fix, issue can cause Tx timeouts.
+ */
+ reg = er32(GCR2);
+ reg |= 1;
+ ew32(GCR2, reg);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * e1000_clear_vfta_82571 - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (hw->mng_cookie.vlan_id != 0) {
+ /*
+ * The VFTA is a 4096b bit-field, each identifying
+ * a single VLAN ID. The following operations
+ * determine which 32b entry (i.e. offset) into the
+ * array we want to set the VLAN ID (i.e. bit) of
+ * the manageability unit.
+ */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
+ E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
+ break;
+ default:
+ break;
+ }
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /*
+ * If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of
+ * the manageability unit.
+ */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
+ e1e_flush();
+ }
+}
+
+/**
+ * e1000_check_mng_mode_82574 - Check manageability is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Reads the NVM Initialization Control Word 2 and returns true
+ * (>0) if any manageability is enabled, else false (0).
+ **/
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
+{
+ u16 data;
+
+ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+ return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
+}
+
+/**
+ * e1000_led_on_82574 - Turn LED on
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED on.
+ **/
+static s32 e1000_led_on_82574(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+
+ ctrl = hw->mac.ledctl_mode2;
+ if (!(E1000_STATUS_LU & er32(STATUS))) {
+ /*
+ * If no link, then turn LED on by setting the invert bit
+ * for each LED that's "on" (0x0E) in ledctl_mode2.
+ */
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
+ }
+ ew32(LEDCTL, ctrl);
+
+ return 0;
+}
+
+/**
+ * e1000_check_phy_82574 - check 82574 phy hung state
+ * @hw: pointer to the HW structure
+ *
+ * Returns whether phy is hung or not
+ **/
+bool e1000_check_phy_82574(struct e1000_hw *hw)
+{
+ u16 status_1kbt = 0;
+ u16 receive_errors = 0;
+ bool phy_hung = false;
+ s32 ret_val = 0;
+
+ /*
+ * Read PHY Receive Error counter first, if its is max - all F's then
+ * read the Base1000T status register If both are max then PHY is hung.
+ */
+ ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
+
+ if (ret_val)
+ goto out;
+ if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
+ ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
+ if (ret_val)
+ goto out;
+ if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
+ E1000_IDLE_ERROR_COUNT_MASK)
+ phy_hung = true;
+ }
+out:
+ return phy_hung;
+}
+
+/**
+ * e1000_setup_link_82571 - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+static s32 e1000_setup_link_82571(struct e1000_hw *hw)
+{
+ /*
+ * 82573 does not have a word in the NVM to determine
+ * the default flow control setting, so we explicitly
+ * set it to full.
+ */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (hw->fc.requested_mode == e1000_fc_default)
+ hw->fc.requested_mode = e1000_fc_full;
+ break;
+ default:
+ break;
+ }
+
+ return e1000e_setup_link(hw);
+}
+
+/**
+ * e1000_setup_copper_link_82571 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ case e1000_phy_bm:
+ ret_val = e1000e_copper_link_setup_m88(hw);
+ break;
+ case e1000_phy_igp_2:
+ ret_val = e1000e_copper_link_setup_igp(hw);
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000e_setup_copper_link(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configures collision distance and flow control for fiber and serdes links.
+ * Upon successful setup, poll for link.
+ **/
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
+{
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ /*
+ * If SerDes loopback mode is entered, there is no form
+ * of reset to take the adapter out of that mode. So we
+ * have to explicitly take the adapter out of loopback
+ * mode. This prevents drivers from twiddling their thumbs
+ * if another tool failed to take it out of loopback mode.
+ */
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+ break;
+ default:
+ break;
+ }
+
+ return e1000e_setup_fiber_serdes_link(hw);
+}
+
+/**
+ * e1000_check_for_serdes_link_82571 - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Reports the link state as up or down.
+ *
+ * If autonegotiation is supported by the link partner, the link state is
+ * determined by the result of autonegotiation. This is the most likely case.
+ * If autonegotiation is not supported by the link partner, and the link
+ * has a valid signal, force the link up.
+ *
+ * The link state is represented internally here by 4 states:
+ *
+ * 1) down
+ * 2) autoneg_progress
+ * 3) autoneg_complete (the link successfully autonegotiated)
+ * 4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
+ **/
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ u32 txcw;
+ u32 i;
+ s32 ret_val = 0;
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
+
+ /* Receiver is synchronized with no invalid bits. */
+ switch (mac->serdes_link_state) {
+ case e1000_serdes_link_autoneg_complete:
+ if (!(status & E1000_STATUS_LU)) {
+ /*
+ * We have lost link, retry autoneg before
+ * reporting link failure
+ */
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("AN_UP -> AN_PROG\n");
+ } else {
+ mac->serdes_has_link = true;
+ }
+ break;
+
+ case e1000_serdes_link_forced_up:
+ /*
+ * If we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable
+ * forced link in the Device Control register in an
+ * attempt to auto-negotiate with our link partner.
+ * If the partner code word is null, stop forcing
+ * and restart auto negotiation.
+ */
+ if ((rxcw & E1000_RXCW_C) || !(rxcw & E1000_RXCW_CW)) {
+ /* Enable autoneg, and unforce link up */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("FORCED_UP -> AN_PROG\n");
+ } else {
+ mac->serdes_has_link = true;
+ }
+ break;
+
+ case e1000_serdes_link_autoneg_progress:
+ if (rxcw & E1000_RXCW_C) {
+ /*
+ * We received /C/ ordered sets, meaning the
+ * link partner has autonegotiated, and we can
+ * trust the Link Up (LU) status bit.
+ */
+ if (status & E1000_STATUS_LU) {
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_complete;
+ e_dbg("AN_PROG -> AN_UP\n");
+ mac->serdes_has_link = true;
+ } else {
+ /* Autoneg completed, but failed. */
+ mac->serdes_link_state =
+ e1000_serdes_link_down;
+ e_dbg("AN_PROG -> DOWN\n");
+ }
+ } else {
+ /*
+ * The link partner did not autoneg.
+ * Force link up and full duplex, and change
+ * state to forced.
+ */
+ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after link up. */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error config flow control\n");
+ break;
+ }
+ mac->serdes_link_state =
+ e1000_serdes_link_forced_up;
+ mac->serdes_has_link = true;
+ e_dbg("AN_PROG -> FORCED_UP\n");
+ }
+ break;
+
+ case e1000_serdes_link_down:
+ default:
+ /*
+ * The link was down but the receiver has now gained
+ * valid sync, so lets see if we can bring the link
+ * up.
+ */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("DOWN -> AN_PROG\n");
+ break;
+ }
+ } else {
+ if (!(rxcw & E1000_RXCW_SYNCH)) {
+ mac->serdes_has_link = false;
+ mac->serdes_link_state = e1000_serdes_link_down;
+ e_dbg("ANYSTATE -> DOWN\n");
+ } else {
+ /*
+ * Check several times, if Sync and Config
+ * both are consistently 1 then simply ignore
+ * the Invalid bit and restart Autoneg
+ */
+ for (i = 0; i < AN_RETRY_COUNT; i++) {
+ udelay(10);
+ rxcw = er32(RXCW);
+ if ((rxcw & E1000_RXCW_IV) &&
+ !((rxcw & E1000_RXCW_SYNCH) &&
+ (rxcw & E1000_RXCW_C))) {
+ mac->serdes_has_link = false;
+ mac->serdes_link_state =
+ e1000_serdes_link_down;
+ e_dbg("ANYSTATE -> DOWN\n");
+ break;
+ }
+ }
+
+ if (i == AN_RETRY_COUNT) {
+ txcw = er32(TXCW);
+ txcw |= E1000_TXCW_ANE;
+ ew32(TXCW, txcw);
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("ANYSTATE -> AN_PROG\n");
+ }
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_valid_led_default_82571 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (*data == ID_LED_RESERVED_F746)
+ *data = ID_LED_DEFAULT_82573;
+ break;
+ default:
+ if (*data == ID_LED_RESERVED_0000 ||
+ *data == ID_LED_RESERVED_FFFF)
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_get_laa_state_82571 - Get locally administered address state
+ * @hw: pointer to the HW structure
+ *
+ * Retrieve and return the current locally administered address state.
+ **/
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
+{
+ if (hw->mac.type != e1000_82571)
+ return false;
+
+ return hw->dev_spec.e82571.laa_is_present;
+}
+
+/**
+ * e1000e_set_laa_state_82571 - Set locally administered address state
+ * @hw: pointer to the HW structure
+ * @state: enable/disable locally administered address
+ *
+ * Enable/Disable the current locally administered address state.
+ **/
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
+{
+ if (hw->mac.type != e1000_82571)
+ return;
+
+ hw->dev_spec.e82571.laa_is_present = state;
+
+ /* If workaround is activated... */
+ if (state)
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed, the actual LAA is in one of the RARs and no
+ * incoming packets directed to this port are dropped.
+ * Eventually the LAA will be in RAR[0] and RAR[14].
+ */
+ e1000e_rar_set(hw, hw->mac.addr, hw->mac.rar_entry_count - 1);
+}
+
+/**
+ * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Verifies that the EEPROM has completed the update. After updating the
+ * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If
+ * the checksum fix is not implemented, we need to set the bit and update
+ * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect,
+ * we need to return bad checksum.
+ **/
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 data;
+
+ if (nvm->type != e1000_nvm_flash_hw)
+ return 0;
+
+ /*
+ * Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed.
+ */
+ ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(data & 0x10)) {
+ /*
+ * Read 0x23 and check bit 15. This bit is a 1
+ * when the checksum has already been fixed. If
+ * the checksum is still wrong and this bit is a
+ * 1, we need to return bad checksum. Otherwise,
+ * we need to set this bit to a 1 and update the
+ * checksum.
+ */
+ ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(data & 0x8000)) {
+ data |= 0x8000;
+ ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_update_nvm_checksum(hw);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_read_mac_addr_82571 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (hw->mac.type == e1000_82571) {
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = e1000_read_mac_addr_generic(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!(phy->ops.check_reset_block))
+ return;
+
+ /* If the management interface is not enabled, then power down */
+ if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+}
+
+/**
+ * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
+{
+ e1000e_clear_hw_cntrs_base(hw);
+
+ er32(PRC64);
+ er32(PRC127);
+ er32(PRC255);
+ er32(PRC511);
+ er32(PRC1023);
+ er32(PRC1522);
+ er32(PTC64);
+ er32(PTC127);
+ er32(PTC255);
+ er32(PTC511);
+ er32(PTC1023);
+ er32(PTC1522);
+
+ er32(ALGNERRC);
+ er32(RXERRC);
+ er32(TNCRS);
+ er32(CEXTERR);
+ er32(TSCTC);
+ er32(TSCTFC);
+
+ er32(MGTPRC);
+ er32(MGTPDC);
+ er32(MGTPTC);
+
+ er32(IAC);
+ er32(ICRXOC);
+
+ er32(ICRXPTC);
+ er32(ICRXATC);
+ er32(ICTXPTC);
+ er32(ICTXATC);
+ er32(ICTXQEC);
+ er32(ICTXQMTC);
+ er32(ICRXDMTC);
+}
+
+static struct e1000_mac_operations e82571_mac_ops = {
+ /* .check_mng_mode: mac type dependent */
+ /* .check_for_link: media type dependent */
+ .id_led_init = e1000e_id_led_init,
+ .cleanup_led = e1000e_cleanup_led_generic,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
+ .get_bus_info = e1000e_get_bus_info_pcie,
+ .set_lan_id = e1000_set_lan_id_multi_port_pcie,
+ /* .get_link_up_info: media type dependent */
+ /* .led_on: mac type dependent */
+ .led_off = e1000e_led_off_generic,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .write_vfta = e1000_write_vfta_generic,
+ .clear_vfta = e1000_clear_vfta_82571,
+ .reset_hw = e1000_reset_hw_82571,
+ .init_hw = e1000_init_hw_82571,
+ .setup_link = e1000_setup_link_82571,
+ /* .setup_physical_interface: media type dependent */
+ .setup_led = e1000e_setup_led_generic,
+ .read_mac_addr = e1000_read_mac_addr_82571,
+};
+
+static struct e1000_phy_operations e82_phy_ops_igp = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_igp,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = NULL,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
+ .get_cfg_done = e1000_get_cfg_done_82571,
+ .get_cable_length = e1000e_get_cable_length_igp_2,
+ .get_info = e1000e_get_phy_info_igp,
+ .read_reg = e1000e_read_phy_reg_igp,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_igp,
+ .cfg_on_link_up = NULL,
+};
+
+static struct e1000_phy_operations e82_phy_ops_m88 = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_m88,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_m88,
+ .cfg_on_link_up = NULL,
+};
+
+static struct e1000_phy_operations e82_phy_ops_bm = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_bm2,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_bm2,
+ .cfg_on_link_up = NULL,
+};
+
+static struct e1000_nvm_operations e82571_nvm_ops = {
+ .acquire = e1000_acquire_nvm_82571,
+ .read = e1000e_read_nvm_eerd,
+ .release = e1000_release_nvm_82571,
+ .update = e1000_update_nvm_checksum_82571,
+ .valid_led_default = e1000_valid_led_default_82571,
+ .validate = e1000_validate_nvm_checksum_82571,
+ .write = e1000_write_nvm_82571,
+};
+
+struct e1000_info e1000_82571_info = {
+ .mac = e1000_82571,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_RESET_OVERWRITES_LAA /* errata */
+ | FLAG_TARC_SPEED_MODE_BIT /* errata */
+ | FLAG_APME_CHECK_PORT_B,
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_igp,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+struct e1000_info e1000_82572_info = {
+ .mac = e1000_82572,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_igp,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+struct e1000_info e1000_82573_info = {
+ .mac = e1000_82573,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_SWSM_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L1
+ | FLAG2_DISABLE_ASPM_L0S,
+ .pba = 20,
+ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_m88,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+struct e1000_info e1000_82574_info = {
+ .mac = e1000_82574,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_MSIX
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_CHECK_PHY_HANG
+ | FLAG2_DISABLE_ASPM_L0S,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_bm,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+struct e1000_info e1000_82583_info = {
+ .mac = e1000_82583,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L0S,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_bm,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
--- /dev/null
+################################################################################
+#
+# Intel PRO/1000 Linux driver
+# Copyright(c) 1999 - 2011 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) PRO/1000 ethernet driver
+#
+
+obj-$(CONFIG_E1000E) += e1000e.o
+
+e1000e-objs := 82571.o ich8lan.o 80003es2lan.o \
+ lib.o phy.o param.o ethtool.o netdev.o
+
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_APME 0x00000001 /* APM Enable */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+
+/* Wake Up Status */
+#define E1000_WUS_LNKC E1000_WUFC_LNKC
+#define E1000_WUS_MAG E1000_WUFC_MAG
+#define E1000_WUS_EX E1000_WUFC_EX
+#define E1000_WUS_MC E1000_WUFC_MC
+#define E1000_WUS_BC E1000_WUFC_BC
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Definable Pin 3 */
+#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */
+#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */
+#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clock Gating */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */
+#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_LSECCK 0x00001000
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_ERR_CE 0x01 /* CRC Error */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */
+#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */
+#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */
+#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* mask to determine if packets should be dropped due to frame errors */
+#define E1000_RXD_ERR_FRAME_ERR_MASK ( \
+ E1000_RXD_ERR_CE | \
+ E1000_RXD_ERR_SE | \
+ E1000_RXD_ERR_SEQ | \
+ E1000_RXD_ERR_CXE | \
+ E1000_RXD_ERR_RXE)
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+/* Enable MNG packets to host memory */
+#define E1000_MANC_EN_MNG2HOST 0x00200000
+
+#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */
+#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */
+#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */
+#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */
+
+/* Receive Control */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
+#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */
+#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */
+#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */
+/* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
+#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */
+#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */
+#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */
+#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */
+#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+
+/*
+ * Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x1
+#define E1000_SWFW_PHY0_SM 0x2
+#define E1000_SWFW_PHY1_SM 0x4
+#define E1000_SWFW_CSR_SM 0x8
+
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+#define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */
+#define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+
+/*
+ * Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+#define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Completion by NVM */
+#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */
+
+/* Constants used to interpret the masked PCI-X bus speed. */
+
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG ( ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_PHY_LED0_MODE_MASK 0x00000007
+#define E1000_PHY_LED0_IVRT 0x00000008
+#define E1000_PHY_LED0_MASK 0x0000001F
+
+#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_IVRT 0x00000040
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+
+#define E1000_LEDCTL_MODE_LINK_UP 0x2
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */
+#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */
+#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */
+#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */
+#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */
+#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */
+#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */
+
+/* Transmit Control */
+#define E1000_TCTL_EN 0x00000002 /* enable Tx */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */
+
+/* Transmit Arbitration Count */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+
+/* Header split receive */
+#define E1000_RFCTL_NFSW_DIS 0x00000040
+#define E1000_RFCTL_NFSR_DIS 0x00000080
+#define E1000_RFCTL_ACK_DIS 0x00001000
+#define E1000_RFCTL_EXTEN 0x00008000
+#define E1000_RFCTL_IPV6_EX_DIS 0x00010000
+#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Default values for the transmit IPG register */
+#define DEFAULT_82543_TIPG_IPGT_COPPER 8
+
+#define E1000_TIPG_IPGT_MASK 0x000003FF
+
+#define DEFAULT_82543_TIPG_IPGR1 8
+#define E1000_TIPG_IPGR1_SHIFT 10
+
+#define DEFAULT_82543_TIPG_IPGR2 6
+#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7
+#define E1000_TIPG_IPGR2_SHIFT 20
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* Extended Configuration Control and Size */
+#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
+#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001
+#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008
+#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020
+#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000
+#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000
+#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16
+
+#define E1000_PHY_CTRL_D0A_LPLU 0x00000002
+#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004
+#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008
+#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040
+
+#define E1000_KABGTXD_BGSQLBIAS 0x00050000
+
+/* PBA constants */
+#define E1000_PBA_8K 0x0008 /* 8KB */
+#define E1000_PBA_16K 0x0010 /* 16KB */
+
+#define E1000_PBS_16K E1000_PBA_16K
+
+#define IFS_MAX 80
+#define IFS_MIN 40
+#define IFS_RATIO 4
+#define IFS_STEP 10
+#define MIN_NUM_XMITS 1000
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */
+
+#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */
+#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */
+#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */
+#define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */
+#define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */
+#define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */
+#define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */
+
+/* PBA ECC Register */
+#define E1000_PBA_ECC_COUNTER_MASK 0xFFF00000 /* ECC counter mask */
+#define E1000_PBA_ECC_COUNTER_SHIFT 20 /* ECC counter shift value */
+#define E1000_PBA_ECC_CORR_EN 0x00000001 /* ECC correction enable */
+#define E1000_PBA_ECC_STAT_CLR 0x00000002 /* Clear ECC error counter */
+#define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 for ECC */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */
+#define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */
+#define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */
+#define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */
+#define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */
+#define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */
+
+/* Transmit Descriptor Control */
+#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
+#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
+#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
+#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */
+#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
+#define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */
+/* Enable the counting of desc. still to be processed. */
+#define E1000_TXDCTL_COUNT_DESC 0x00400000
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* 802.1q VLAN Packet Size */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAR_ENTRIES 15
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+
+/* Error Codes */
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_PHY_TYPE 6
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_ERR_HOST_INTERFACE_COMMAND 11
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_INVALID_ARGUMENT 16
+#define E1000_ERR_NO_SPACE 17
+#define E1000_ERR_NVM_PBA_SECTION 18
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define FIBER_LINK_UP_LIMIT 50
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+#define MDIO_OWNERSHIP_TIMEOUT 10
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */
+#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+/* Transmit Configuration Word */
+#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */
+#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */
+#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */
+#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */
+#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */
+
+/* Receive Configuration Word */
+#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */
+#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */
+#define E1000_RXCW_C 0x20000000 /* Receive config */
+#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */
+
+/* PCI Express Control */
+#define E1000_GCR_RXD_NO_SNOOP 0x00000001
+#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002
+#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004
+#define E1000_GCR_TXD_NO_SNOOP 0x00000008
+#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010
+#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020
+
+#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \
+ E1000_GCR_RXDSCW_NO_SNOOP | \
+ E1000_GCR_RXDSCR_NO_SNOOP | \
+ E1000_GCR_TXD_NO_SNOOP | \
+ E1000_GCR_TXDSCW_NO_SNOOP | \
+ E1000_GCR_TXDSCR_NO_SNOOP)
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+ /* 0=DTE device */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
+
+#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */
+/* NVM Addressing bits based on type (0-small, 1-large) */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */
+#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */
+#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */
+#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES)
+
+#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+#define E1000_FLASH_UPDATES 2000
+
+/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_3GIO_3 0x001A
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_CFG 0x0012
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+
+#define E1000_NVM_INIT_CTRL2_MNGM 0x6000 /* Manageability Operation Mode mask */
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x80000 /* ...for second port */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_PAUSE 0x1000
+#define NVM_WORD0F_ASM_DIR 0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+#define NVM_WORD1A_ASPM_MASK 0x000C
+
+/* Mask bits for fields in Word 0x03 of the EEPROM */
+#define NVM_COMPAT_LOM 0x0800
+
+/* length of string needed to store PBA number */
+#define E1000_PBANUM_LENGTH 11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+/* PBA (printed board assembly) number words */
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_PBA_PTR_GUARD 0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCI_HEADER_TYPE_REGISTER 0x0E
+#define PCIE_LINK_STATUS 0x12
+
+#define PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define PCIE_LINK_WIDTH_MASK 0x3F0
+#define PCIE_LINK_WIDTH_SHIFT 4
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/*
+ * I = Integrated
+ * E = External
+ */
+#define M88E1000_E_PHY_ID 0x01410C50
+#define M88E1000_I_PHY_ID 0x01410C30
+#define M88E1011_I_PHY_ID 0x01410C20
+#define IGP01E1000_I_PHY_ID 0x02A80380
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define GG82563_E_PHY_ID 0x01410CA0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define IFE_E_PHY_ID 0x02A80330
+#define IFE_PLUS_E_PHY_ID 0x02A80320
+#define IFE_C_E_PHY_ID 0x02A80310
+#define BME1000_E_PHY_ID 0x01410CB0
+#define BME1000_E_PHY_ID_R2 0x01410CB1
+#define I82577_E_PHY_ID 0x01540050
+#define I82578_E_PHY_ID 0x004DD040
+#define I82579_E_PHY_ID 0x01540090
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold)
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/* 0=<50M; 1=50-80M; 2=80-110M; 3=110-140M; 4=>140M */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+
+#define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020
+#define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C
+
+/* BME1000 PHY Specific Control Register */
+#define BME1000_PSCR_ENABLE_DOWNSHIFT 0x0800 /* 1 = enable downshift */
+
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+ ((reg) & MAX_PHY_REG_ADDRESS))
+
+/*
+ * Bits...
+ * 15-5: page
+ * 4-0: register offset
+ */
+#define GG82563_PAGE_SHIFT 5
+#define GG82563_REG(page, reg) \
+ (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
+#define GG82563_MIN_ALT_REG 30
+
+/* GG82563 Specific Registers */
+#define GG82563_PHY_SPEC_CTRL \
+ GG82563_REG(0, 16) /* PHY Specific Control */
+#define GG82563_PHY_PAGE_SELECT \
+ GG82563_REG(0, 22) /* Page Select */
+#define GG82563_PHY_SPEC_CTRL_2 \
+ GG82563_REG(0, 26) /* PHY Specific Control 2 */
+#define GG82563_PHY_PAGE_SELECT_ALT \
+ GG82563_REG(0, 29) /* Alternate Page Select */
+
+#define GG82563_PHY_MAC_SPEC_CTRL \
+ GG82563_REG(2, 21) /* MAC Specific Control Register */
+
+#define GG82563_PHY_DSP_DISTANCE \
+ GG82563_REG(5, 26) /* DSP Distance */
+
+/* Page 193 - Port Control Registers */
+#define GG82563_PHY_KMRN_MODE_CTRL \
+ GG82563_REG(193, 16) /* Kumeran Mode Control */
+#define GG82563_PHY_PWR_MGMT_CTRL \
+ GG82563_REG(193, 20) /* Power Management Control */
+
+/* Page 194 - KMRN Registers */
+#define GG82563_PHY_INBAND_CTRL \
+ GG82563_REG(194, 18) /* Inband Control */
+
+/* MDI Control */
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_ERROR 0x40000000
+
+/* SerDes Control */
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#endif /* _E1000_DEFINES_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _E1000_H_
+#define _E1000_H_
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/workqueue.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/crc32.h>
+#include <linux/if_vlan.h>
+
+#include "hw.h"
+
+struct e1000_info;
+
+#define e_dbg(format, arg...) \
+ netdev_dbg(hw->adapter->netdev, format, ## arg)
+#define e_err(format, arg...) \
+ netdev_err(adapter->netdev, format, ## arg)
+#define e_info(format, arg...) \
+ netdev_info(adapter->netdev, format, ## arg)
+#define e_warn(format, arg...) \
+ netdev_warn(adapter->netdev, format, ## arg)
+#define e_notice(format, arg...) \
+ netdev_notice(adapter->netdev, format, ## arg)
+
+
+/* Interrupt modes, as used by the IntMode parameter */
+#define E1000E_INT_MODE_LEGACY 0
+#define E1000E_INT_MODE_MSI 1
+#define E1000E_INT_MODE_MSIX 2
+
+/* Tx/Rx descriptor defines */
+#define E1000_DEFAULT_TXD 256
+#define E1000_MAX_TXD 4096
+#define E1000_MIN_TXD 64
+
+#define E1000_DEFAULT_RXD 256
+#define E1000_MAX_RXD 4096
+#define E1000_MIN_RXD 64
+
+#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* Early Receive defines */
+#define E1000_ERT_2048 0x100
+
+#define E1000_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define E1000_EEPROM_APME 0x0400
+
+#define E1000_MNG_VLAN_NONE (-1)
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
+#define DEFAULT_JUMBO 9234
+
+/* BM/HV Specific Registers */
+#define BM_PORT_CTRL_PAGE 769
+
+#define PHY_UPPER_SHIFT 21
+#define BM_PHY_REG(page, reg) \
+ (((reg) & MAX_PHY_REG_ADDRESS) |\
+ (((page) & 0xFFFF) << PHY_PAGE_SHIFT) |\
+ (((reg) & ~MAX_PHY_REG_ADDRESS) << (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)))
+
+/* PHY Wakeup Registers and defines */
+#define BM_PORT_GEN_CFG PHY_REG(BM_PORT_CTRL_PAGE, 17)
+#define BM_RCTL PHY_REG(BM_WUC_PAGE, 0)
+#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
+#define BM_RAR_L(_i) (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
+#define BM_RAR_M(_i) (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
+#define BM_RAR_H(_i) (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
+#define BM_RAR_CTRL(_i) (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
+#define BM_MTA(_i) (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
+
+#define BM_RCTL_UPE 0x0001 /* Unicast Promiscuous Mode */
+#define BM_RCTL_MPE 0x0002 /* Multicast Promiscuous Mode */
+#define BM_RCTL_MO_SHIFT 3 /* Multicast Offset Shift */
+#define BM_RCTL_MO_MASK (3 << 3) /* Multicast Offset Mask */
+#define BM_RCTL_BAM 0x0020 /* Broadcast Accept Mode */
+#define BM_RCTL_PMCF 0x0040 /* Pass MAC Control Frames */
+#define BM_RCTL_RFCE 0x0080 /* Rx Flow Control Enable */
+
+#define HV_STATS_PAGE 778
+#define HV_SCC_UPPER PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
+#define HV_SCC_LOWER PHY_REG(HV_STATS_PAGE, 17)
+#define HV_ECOL_UPPER PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
+#define HV_ECOL_LOWER PHY_REG(HV_STATS_PAGE, 19)
+#define HV_MCC_UPPER PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
+#define HV_MCC_LOWER PHY_REG(HV_STATS_PAGE, 21)
+#define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
+#define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
+#define HV_COLC_UPPER PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
+#define HV_COLC_LOWER PHY_REG(HV_STATS_PAGE, 26)
+#define HV_DC_UPPER PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
+#define HV_DC_LOWER PHY_REG(HV_STATS_PAGE, 28)
+#define HV_TNCRS_UPPER PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
+#define HV_TNCRS_LOWER PHY_REG(HV_STATS_PAGE, 30)
+
+#define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
+
+/* BM PHY Copper Specific Status */
+#define BM_CS_STATUS 17
+#define BM_CS_STATUS_LINK_UP 0x0400
+#define BM_CS_STATUS_RESOLVED 0x0800
+#define BM_CS_STATUS_SPEED_MASK 0xC000
+#define BM_CS_STATUS_SPEED_1000 0x8000
+
+/* 82577 Mobile Phy Status Register */
+#define HV_M_STATUS 26
+#define HV_M_STATUS_AUTONEG_COMPLETE 0x1000
+#define HV_M_STATUS_SPEED_MASK 0x0300
+#define HV_M_STATUS_SPEED_1000 0x0200
+#define HV_M_STATUS_LINK_UP 0x0040
+
+/* Time to wait before putting the device into D3 if there's no link (in ms). */
+#define LINK_TIMEOUT 100
+
+#define DEFAULT_RDTR 0
+#define DEFAULT_RADV 8
+#define BURST_RDTR 0x20
+#define BURST_RADV 0x20
+
+/*
+ * in the case of WTHRESH, it appears at least the 82571/2 hardware
+ * writes back 4 descriptors when WTHRESH=5, and 3 descriptors when
+ * WTHRESH=4, and since we want 64 bytes at a time written back, set
+ * it to 5
+ */
+#define E1000_TXDCTL_DMA_BURST_ENABLE \
+ (E1000_TXDCTL_GRAN | /* set descriptor granularity */ \
+ E1000_TXDCTL_COUNT_DESC | \
+ (5 << 16) | /* wthresh must be +1 more than desired */\
+ (1 << 8) | /* hthresh */ \
+ 0x1f) /* pthresh */
+
+#define E1000_RXDCTL_DMA_BURST_ENABLE \
+ (0x01000000 | /* set descriptor granularity */ \
+ (4 << 16) | /* set writeback threshold */ \
+ (4 << 8) | /* set prefetch threshold */ \
+ 0x20) /* set hthresh */
+
+#define E1000_TIDV_FPD (1 << 31)
+#define E1000_RDTR_FPD (1 << 31)
+
+enum e1000_boards {
+ board_82571,
+ board_82572,
+ board_82573,
+ board_82574,
+ board_82583,
+ board_80003es2lan,
+ board_ich8lan,
+ board_ich9lan,
+ board_ich10lan,
+ board_pchlan,
+ board_pch2lan,
+};
+
+struct e1000_ps_page {
+ struct page *page;
+ u64 dma; /* must be u64 - written to hw */
+};
+
+/*
+ * wrappers around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct e1000_buffer {
+ dma_addr_t dma;
+ struct sk_buff *skb;
+ union {
+ /* Tx */
+ struct {
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ unsigned int segs;
+ unsigned int bytecount;
+ u16 mapped_as_page;
+ };
+ /* Rx */
+ struct {
+ /* arrays of page information for packet split */
+ struct e1000_ps_page *ps_pages;
+ struct page *page;
+ };
+ };
+};
+
+struct e1000_ring {
+ void *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
+
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u16 head;
+ u16 tail;
+
+ /* array of buffer information structs */
+ struct e1000_buffer *buffer_info;
+
+ char name[IFNAMSIZ + 5];
+ u32 ims_val;
+ u32 itr_val;
+ u16 itr_register;
+ int set_itr;
+
+ struct sk_buff *rx_skb_top;
+};
+
+/* PHY register snapshot values */
+struct e1000_phy_regs {
+ u16 bmcr; /* basic mode control register */
+ u16 bmsr; /* basic mode status register */
+ u16 advertise; /* auto-negotiation advertisement */
+ u16 lpa; /* link partner ability register */
+ u16 expansion; /* auto-negotiation expansion reg */
+ u16 ctrl1000; /* 1000BASE-T control register */
+ u16 stat1000; /* 1000BASE-T status register */
+ u16 estatus; /* extended status register */
+};
+
+/* board specific private data structure */
+struct e1000_adapter {
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ struct timer_list blink_timer;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+
+ const struct e1000_info *ei;
+
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u16 mng_vlan_id;
+ u16 link_speed;
+ u16 link_duplex;
+ u16 eeprom_vers;
+
+ /* track device up/down/testing state */
+ unsigned long state;
+
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /*
+ * Tx
+ */
+ struct e1000_ring *tx_ring /* One per active queue */
+ ____cacheline_aligned_in_smp;
+
+ struct napi_struct napi;
+
+ unsigned int restart_queue;
+ u32 txd_cmd;
+
+ bool detect_tx_hung;
+ u8 tx_timeout_factor;
+
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+
+ /* Tx stats */
+ u64 tpt_old;
+ u64 colc_old;
+ u32 gotc;
+ u64 gotc_old;
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u32 tx_dma_failed;
+
+ /*
+ * Rx
+ */
+ bool (*clean_rx) (struct e1000_adapter *adapter,
+ int *work_done, int work_to_do)
+ ____cacheline_aligned_in_smp;
+ void (*alloc_rx_buf) (struct e1000_adapter *adapter,
+ int cleaned_count, gfp_t gfp);
+ struct e1000_ring *rx_ring;
+
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+
+ /* Rx stats */
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 gorc;
+ u64 gorc_old;
+ u32 alloc_rx_buff_failed;
+ u32 rx_dma_failed;
+
+ unsigned int rx_ps_pages;
+ u16 rx_ps_bsize0;
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+
+ spinlock_t stats64_lock;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ /* Snapshot of PHY registers */
+ struct e1000_phy_regs phy_regs;
+
+ struct e1000_ring test_tx_ring;
+ struct e1000_ring test_rx_ring;
+ u32 test_icr;
+
+ u32 msg_enable;
+ unsigned int num_vectors;
+ struct msix_entry *msix_entries;
+ int int_mode;
+ u32 eiac_mask;
+
+ u32 eeprom_wol;
+ u32 wol;
+ u32 pba;
+ u32 max_hw_frame_size;
+
+ bool fc_autoneg;
+
+ unsigned int flags;
+ unsigned int flags2;
+ struct work_struct downshift_task;
+ struct work_struct update_phy_task;
+ struct work_struct print_hang_task;
+
+ bool idle_check;
+ int phy_hang_count;
+};
+
+struct e1000_info {
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ unsigned int flags2;
+ u32 pba;
+ u32 max_hw_frame_size;
+ s32 (*get_variants)(struct e1000_adapter *);
+ struct e1000_mac_operations *mac_ops;
+ struct e1000_phy_operations *phy_ops;
+ struct e1000_nvm_operations *nvm_ops;
+};
+
+/* hardware capability, feature, and workaround flags */
+#define FLAG_HAS_AMT (1 << 0)
+#define FLAG_HAS_FLASH (1 << 1)
+#define FLAG_HAS_HW_VLAN_FILTER (1 << 2)
+#define FLAG_HAS_WOL (1 << 3)
+#define FLAG_HAS_ERT (1 << 4)
+#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
+#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
+#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
+#define FLAG_READ_ONLY_NVM (1 << 8)
+#define FLAG_IS_ICH (1 << 9)
+#define FLAG_HAS_MSIX (1 << 10)
+#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
+#define FLAG_IS_QUAD_PORT_A (1 << 12)
+#define FLAG_IS_QUAD_PORT (1 << 13)
+#define FLAG_TIPG_MEDIUM_FOR_80003ESLAN (1 << 14)
+#define FLAG_APME_IN_WUC (1 << 15)
+#define FLAG_APME_IN_CTRL3 (1 << 16)
+#define FLAG_APME_CHECK_PORT_B (1 << 17)
+#define FLAG_DISABLE_FC_PAUSE_TIME (1 << 18)
+#define FLAG_NO_WAKE_UCAST (1 << 19)
+#define FLAG_MNG_PT_ENABLED (1 << 20)
+#define FLAG_RESET_OVERWRITES_LAA (1 << 21)
+#define FLAG_TARC_SPEED_MODE_BIT (1 << 22)
+#define FLAG_TARC_SET_BIT_ZERO (1 << 23)
+#define FLAG_RX_NEEDS_RESTART (1 << 24)
+#define FLAG_LSC_GIG_SPEED_DROP (1 << 25)
+#define FLAG_SMART_POWER_DOWN (1 << 26)
+#define FLAG_MSI_ENABLED (1 << 27)
+#define FLAG_RX_CSUM_ENABLED (1 << 28)
+#define FLAG_TSO_FORCE (1 << 29)
+#define FLAG_RX_RESTART_NOW (1 << 30)
+#define FLAG_MSI_TEST_FAILED (1 << 31)
+
+/* CRC Stripping defines */
+#define FLAG2_CRC_STRIPPING (1 << 0)
+#define FLAG2_HAS_PHY_WAKEUP (1 << 1)
+#define FLAG2_IS_DISCARDING (1 << 2)
+#define FLAG2_DISABLE_ASPM_L1 (1 << 3)
+#define FLAG2_HAS_PHY_STATS (1 << 4)
+#define FLAG2_HAS_EEE (1 << 5)
+#define FLAG2_DMA_BURST (1 << 6)
+#define FLAG2_DISABLE_ASPM_L0S (1 << 7)
+#define FLAG2_DISABLE_AIM (1 << 8)
+#define FLAG2_CHECK_PHY_HANG (1 << 9)
+
+#define E1000_RX_DESC_PS(R, i) \
+ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
+#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
+#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
+#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
+
+enum e1000_state_t {
+ __E1000_TESTING,
+ __E1000_RESETTING,
+ __E1000_DOWN
+};
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+extern char e1000e_driver_name[];
+extern const char e1000e_driver_version[];
+
+extern void e1000e_check_options(struct e1000_adapter *adapter);
+extern void e1000e_set_ethtool_ops(struct net_device *netdev);
+
+extern int e1000e_up(struct e1000_adapter *adapter);
+extern void e1000e_down(struct e1000_adapter *adapter);
+extern void e1000e_reinit_locked(struct e1000_adapter *adapter);
+extern void e1000e_reset(struct e1000_adapter *adapter);
+extern void e1000e_power_up_phy(struct e1000_adapter *adapter);
+extern int e1000e_setup_rx_resources(struct e1000_adapter *adapter);
+extern int e1000e_setup_tx_resources(struct e1000_adapter *adapter);
+extern void e1000e_free_rx_resources(struct e1000_adapter *adapter);
+extern void e1000e_free_tx_resources(struct e1000_adapter *adapter);
+extern struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64
+ *stats);
+extern void e1000e_set_interrupt_capability(struct e1000_adapter *adapter);
+extern void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter);
+extern void e1000e_get_hw_control(struct e1000_adapter *adapter);
+extern void e1000e_release_hw_control(struct e1000_adapter *adapter);
+
+extern unsigned int copybreak;
+
+extern char *e1000e_get_hw_dev_name(struct e1000_hw *hw);
+
+extern struct e1000_info e1000_82571_info;
+extern struct e1000_info e1000_82572_info;
+extern struct e1000_info e1000_82573_info;
+extern struct e1000_info e1000_82574_info;
+extern struct e1000_info e1000_82583_info;
+extern struct e1000_info e1000_ich8_info;
+extern struct e1000_info e1000_ich9_info;
+extern struct e1000_info e1000_ich10_info;
+extern struct e1000_info e1000_pch_info;
+extern struct e1000_info e1000_pch2_info;
+extern struct e1000_info e1000_es2_info;
+
+extern s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+ u32 pba_num_size);
+
+extern s32 e1000e_commit_phy(struct e1000_hw *hw);
+
+extern bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw);
+
+extern bool e1000e_get_laa_state_82571(struct e1000_hw *hw);
+extern void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state);
+
+extern void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw);
+extern void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state);
+extern void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
+extern void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
+extern void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
+extern void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
+extern s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
+extern s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
+extern void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
+
+extern s32 e1000e_check_for_copper_link(struct e1000_hw *hw);
+extern s32 e1000e_check_for_fiber_link(struct e1000_hw *hw);
+extern s32 e1000e_check_for_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_setup_led_generic(struct e1000_hw *hw);
+extern s32 e1000e_cleanup_led_generic(struct e1000_hw *hw);
+extern s32 e1000e_led_on_generic(struct e1000_hw *hw);
+extern s32 e1000e_led_off_generic(struct e1000_hw *hw);
+extern s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw);
+extern void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw);
+extern void e1000_set_lan_id_single_port(struct e1000_hw *hw);
+extern s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex);
+extern s32 e1000e_disable_pcie_master(struct e1000_hw *hw);
+extern s32 e1000e_get_auto_rd_done(struct e1000_hw *hw);
+extern s32 e1000e_id_led_init(struct e1000_hw *hw);
+extern void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw);
+extern s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw);
+extern s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw);
+extern s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw);
+extern s32 e1000e_setup_link(struct e1000_hw *hw);
+extern void e1000_clear_vfta_generic(struct e1000_hw *hw);
+extern void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+extern void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+ u8 *mc_addr_list,
+ u32 mc_addr_count);
+extern void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+extern s32 e1000e_set_fc_watermarks(struct e1000_hw *hw);
+extern void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop);
+extern s32 e1000e_get_hw_semaphore(struct e1000_hw *hw);
+extern s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data);
+extern void e1000e_config_collision_dist(struct e1000_hw *hw);
+extern s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw);
+extern s32 e1000e_force_mac_fc(struct e1000_hw *hw);
+extern s32 e1000e_blink_led_generic(struct e1000_hw *hw);
+extern void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value);
+extern s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw);
+extern void e1000e_reset_adaptive(struct e1000_hw *hw);
+extern void e1000e_update_adaptive(struct e1000_hw *hw);
+
+extern s32 e1000e_setup_copper_link(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_id(struct e1000_hw *hw);
+extern void e1000e_put_hw_semaphore(struct e1000_hw *hw);
+extern s32 e1000e_check_reset_block_generic(struct e1000_hw *hw);
+extern s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+extern s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_info_igp(struct e1000_hw *hw);
+extern s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page);
+extern s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+extern s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw);
+extern s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+extern s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
+extern s32 e1000e_phy_sw_reset(struct e1000_hw *hw);
+extern s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+extern s32 e1000e_get_cfg_done(struct e1000_hw *hw);
+extern s32 e1000e_get_cable_length_m88(struct e1000_hw *hw);
+extern s32 e1000e_get_phy_info_m88(struct e1000_hw *hw);
+extern s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw);
+extern enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id);
+extern s32 e1000e_determine_phy_address(struct e1000_hw *hw);
+extern s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
+ u16 *phy_reg);
+extern s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw,
+ u16 *phy_reg);
+extern s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data);
+extern void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl);
+extern s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
+extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
+extern void e1000_power_up_phy_copper(struct e1000_hw *hw);
+extern void e1000_power_down_phy_copper(struct e1000_hw *hw);
+extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000e_check_downshift(struct e1000_hw *hw);
+extern s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data);
+extern s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+extern s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+extern s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data);
+extern s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset,
+ u16 data);
+extern s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset,
+ u16 data);
+extern s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw);
+extern s32 e1000_copper_link_setup_82577(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_82577(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_82577(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw);
+extern s32 e1000_get_cable_length_82577(struct e1000_hw *hw);
+
+extern s32 e1000_check_polarity_m88(struct e1000_hw *hw);
+extern s32 e1000_get_phy_info_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_ife(struct e1000_hw *hw);
+extern s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw);
+extern s32 e1000_check_polarity_igp(struct e1000_hw *hw);
+extern bool e1000_check_phy_82574(struct e1000_hw *hw);
+
+static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)
+{
+ return hw->phy.ops.reset(hw);
+}
+
+static inline s32 e1000_check_reset_block(struct e1000_hw *hw)
+{
+ return hw->phy.ops.check_reset_block(hw);
+}
+
+static inline s32 e1e_rphy(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return hw->phy.ops.read_reg(hw, offset, data);
+}
+
+static inline s32 e1e_wphy(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return hw->phy.ops.write_reg(hw, offset, data);
+}
+
+static inline s32 e1000_get_cable_length(struct e1000_hw *hw)
+{
+ return hw->phy.ops.get_cable_length(hw);
+}
+
+extern s32 e1000e_acquire_nvm(struct e1000_hw *hw);
+extern s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw);
+extern s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg);
+extern s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+extern s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw);
+extern void e1000e_release_nvm(struct e1000_hw *hw);
+extern void e1000e_reload_nvm(struct e1000_hw *hw);
+extern s32 e1000_read_mac_addr_generic(struct e1000_hw *hw);
+
+static inline s32 e1000e_read_mac_addr(struct e1000_hw *hw)
+{
+ if (hw->mac.ops.read_mac_addr)
+ return hw->mac.ops.read_mac_addr(hw);
+
+ return e1000_read_mac_addr_generic(hw);
+}
+
+static inline s32 e1000_validate_nvm_checksum(struct e1000_hw *hw)
+{
+ return hw->nvm.ops.validate(hw);
+}
+
+static inline s32 e1000e_update_nvm_checksum(struct e1000_hw *hw)
+{
+ return hw->nvm.ops.update(hw);
+}
+
+static inline s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ return hw->nvm.ops.read(hw, offset, words, data);
+}
+
+static inline s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ return hw->nvm.ops.write(hw, offset, words, data);
+}
+
+static inline s32 e1000_get_phy_info(struct e1000_hw *hw)
+{
+ return hw->phy.ops.get_info(hw);
+}
+
+static inline s32 e1000e_check_mng_mode(struct e1000_hw *hw)
+{
+ return hw->mac.ops.check_mng_mode(hw);
+}
+
+extern bool e1000e_check_mng_mode_generic(struct e1000_hw *hw);
+extern bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw);
+extern s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length);
+
+static inline u32 __er32(struct e1000_hw *hw, unsigned long reg)
+{
+ return readl(hw->hw_addr + reg);
+}
+
+static inline void __ew32(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+ writel(val, hw->hw_addr + reg);
+}
+
+#endif /* _E1000_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for e1000 */
+
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include "e1000.h"
+
+enum {NETDEV_STATS, E1000_STATS};
+
+struct e1000_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define E1000_STAT(str, m) { \
+ .stat_string = str, \
+ .type = E1000_STATS, \
+ .sizeof_stat = sizeof(((struct e1000_adapter *)0)->m), \
+ .stat_offset = offsetof(struct e1000_adapter, m) }
+#define E1000_NETDEV_STAT(str, m) { \
+ .stat_string = str, \
+ .type = NETDEV_STATS, \
+ .sizeof_stat = sizeof(((struct rtnl_link_stats64 *)0)->m), \
+ .stat_offset = offsetof(struct rtnl_link_stats64, m) }
+
+static const struct e1000_stats e1000_gstrings_stats[] = {
+ E1000_STAT("rx_packets", stats.gprc),
+ E1000_STAT("tx_packets", stats.gptc),
+ E1000_STAT("rx_bytes", stats.gorc),
+ E1000_STAT("tx_bytes", stats.gotc),
+ E1000_STAT("rx_broadcast", stats.bprc),
+ E1000_STAT("tx_broadcast", stats.bptc),
+ E1000_STAT("rx_multicast", stats.mprc),
+ E1000_STAT("tx_multicast", stats.mptc),
+ E1000_NETDEV_STAT("rx_errors", rx_errors),
+ E1000_NETDEV_STAT("tx_errors", tx_errors),
+ E1000_NETDEV_STAT("tx_dropped", tx_dropped),
+ E1000_STAT("multicast", stats.mprc),
+ E1000_STAT("collisions", stats.colc),
+ E1000_NETDEV_STAT("rx_length_errors", rx_length_errors),
+ E1000_NETDEV_STAT("rx_over_errors", rx_over_errors),
+ E1000_STAT("rx_crc_errors", stats.crcerrs),
+ E1000_NETDEV_STAT("rx_frame_errors", rx_frame_errors),
+ E1000_STAT("rx_no_buffer_count", stats.rnbc),
+ E1000_STAT("rx_missed_errors", stats.mpc),
+ E1000_STAT("tx_aborted_errors", stats.ecol),
+ E1000_STAT("tx_carrier_errors", stats.tncrs),
+ E1000_NETDEV_STAT("tx_fifo_errors", tx_fifo_errors),
+ E1000_NETDEV_STAT("tx_heartbeat_errors", tx_heartbeat_errors),
+ E1000_STAT("tx_window_errors", stats.latecol),
+ E1000_STAT("tx_abort_late_coll", stats.latecol),
+ E1000_STAT("tx_deferred_ok", stats.dc),
+ E1000_STAT("tx_single_coll_ok", stats.scc),
+ E1000_STAT("tx_multi_coll_ok", stats.mcc),
+ E1000_STAT("tx_timeout_count", tx_timeout_count),
+ E1000_STAT("tx_restart_queue", restart_queue),
+ E1000_STAT("rx_long_length_errors", stats.roc),
+ E1000_STAT("rx_short_length_errors", stats.ruc),
+ E1000_STAT("rx_align_errors", stats.algnerrc),
+ E1000_STAT("tx_tcp_seg_good", stats.tsctc),
+ E1000_STAT("tx_tcp_seg_failed", stats.tsctfc),
+ E1000_STAT("rx_flow_control_xon", stats.xonrxc),
+ E1000_STAT("rx_flow_control_xoff", stats.xoffrxc),
+ E1000_STAT("tx_flow_control_xon", stats.xontxc),
+ E1000_STAT("tx_flow_control_xoff", stats.xofftxc),
+ E1000_STAT("rx_long_byte_count", stats.gorc),
+ E1000_STAT("rx_csum_offload_good", hw_csum_good),
+ E1000_STAT("rx_csum_offload_errors", hw_csum_err),
+ E1000_STAT("rx_header_split", rx_hdr_split),
+ E1000_STAT("alloc_rx_buff_failed", alloc_rx_buff_failed),
+ E1000_STAT("tx_smbus", stats.mgptc),
+ E1000_STAT("rx_smbus", stats.mgprc),
+ E1000_STAT("dropped_smbus", stats.mgpdc),
+ E1000_STAT("rx_dma_failed", rx_dma_failed),
+ E1000_STAT("tx_dma_failed", tx_dma_failed),
+};
+
+#define E1000_GLOBAL_STATS_LEN ARRAY_SIZE(e1000_gstrings_stats)
+#define E1000_STATS_LEN (E1000_GLOBAL_STATS_LEN)
+static const char e1000_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define E1000_TEST_LEN ARRAY_SIZE(e1000_gstrings_test)
+
+static int e1000_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 speed;
+
+ if (hw->phy.media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ if (hw->phy.type == e1000_phy_ife)
+ ecmd->supported &= ~SUPPORTED_1000baseT_Full;
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->mac.autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->phy.autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy.addr;
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ }
+
+ speed = -1;
+ ecmd->duplex = -1;
+
+ if (netif_running(netdev)) {
+ if (netif_carrier_ok(netdev)) {
+ speed = adapter->link_speed;
+ ecmd->duplex = adapter->link_duplex - 1;
+ }
+ } else {
+ u32 status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ if (status & E1000_STATUS_SPEED_1000)
+ speed = SPEED_1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ speed = SPEED_100;
+ else
+ speed = SPEED_10;
+
+ if (status & E1000_STATUS_FD)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ }
+ }
+
+ ethtool_cmd_speed_set(ecmd, speed);
+ ecmd->autoneg = ((hw->phy.media_type == e1000_media_type_fiber) ||
+ hw->mac.autoneg) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ /* MDI-X => 2; MDI =>1; Invalid =>0 */
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ netif_carrier_ok(netdev))
+ ecmd->eth_tp_mdix = hw->phy.is_mdix ? ETH_TP_MDI_X :
+ ETH_TP_MDI;
+ else
+ ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
+
+ return 0;
+}
+
+static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NICs only allow 1000 gbps Full duplex */
+ if ((adapter->hw.phy.media_type == e1000_media_type_fiber) &&
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL) {
+ goto err_inval;
+ }
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+ return 0;
+
+err_inval:
+ e_err("Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int e1000_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed
+ */
+ if (e1000_check_reset_block(hw)) {
+ e_err("Cannot change link characteristics when SoL/IDER is "
+ "active.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->mac.autoneg = 1;
+ if (hw->phy.media_type == e1000_media_type_fiber)
+ hw->phy.autoneg_advertised = ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg;
+ else
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.requested_mode = e1000_fc_default;
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return -EINVAL;
+ }
+ }
+
+ /* reset the link */
+
+ if (netif_running(adapter->netdev)) {
+ e1000e_down(adapter);
+ e1000e_up(adapter);
+ } else {
+ e1000e_reset(adapter);
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return 0;
+}
+
+static void e1000_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc.current_mode == e1000_fc_rx_pause) {
+ pause->rx_pause = 1;
+ } else if (hw->fc.current_mode == e1000_fc_tx_pause) {
+ pause->tx_pause = 1;
+ } else if (hw->fc.current_mode == e1000_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int e1000_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ hw->fc.requested_mode = e1000_fc_default;
+ if (netif_running(adapter->netdev)) {
+ e1000e_down(adapter);
+ e1000e_up(adapter);
+ } else {
+ e1000e_reset(adapter);
+ }
+ } else {
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_none;
+
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ retval = hw->mac.ops.setup_link(hw);
+ /* implicit goto out */
+ } else {
+ retval = e1000e_force_mac_fc(hw);
+ if (retval)
+ goto out;
+ e1000e_set_fc_watermarks(hw);
+ }
+ }
+
+out:
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return retval;
+}
+
+static u32 e1000_get_rx_csum(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->flags & FLAG_RX_CSUM_ENABLED;
+}
+
+static int e1000_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (data)
+ adapter->flags |= FLAG_RX_CSUM_ENABLED;
+ else
+ adapter->flags &= ~FLAG_RX_CSUM_ENABLED;
+
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ return 0;
+}
+
+static u32 e1000_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int e1000_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int e1000_set_tso(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (data) {
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ } else {
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ }
+
+ adapter->flags |= FLAG_TSO_FORCE;
+ return 0;
+}
+
+static u32 e1000_get_msglevel(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void e1000_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int e1000_get_regs_len(struct net_device *netdev)
+{
+#define E1000_REGS_LEN 32 /* overestimate */
+ return E1000_REGS_LEN * sizeof(u32);
+}
+
+static void e1000_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u16 phy_data;
+
+ memset(p, 0, E1000_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
+ adapter->pdev->device;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RCTL);
+ regs_buff[3] = er32(RDLEN);
+ regs_buff[4] = er32(RDH);
+ regs_buff[5] = er32(RDT);
+ regs_buff[6] = er32(RDTR);
+
+ regs_buff[7] = er32(TCTL);
+ regs_buff[8] = er32(TDLEN);
+ regs_buff[9] = er32(TDH);
+ regs_buff[10] = er32(TDT);
+ regs_buff[11] = er32(TIDV);
+
+ regs_buff[12] = adapter->hw.phy.type; /* PHY type (IGP=1, M88=0) */
+
+ /* ethtool doesn't use anything past this point, so all this
+ * code is likely legacy junk for apps that may or may not
+ * exist */
+ if (hw->phy.type == e1000_phy_m88) {
+ e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ regs_buff[13] = (u32)phy_data; /* cable length */
+ regs_buff[14] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[15] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[16] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ regs_buff[17] = (u32)phy_data; /* extended 10bt distance */
+ regs_buff[18] = regs_buff[13]; /* cable polarity */
+ regs_buff[19] = 0; /* Dummy (to align w/ IGP phy reg dump) */
+ regs_buff[20] = regs_buff[17]; /* polarity correction */
+ /* phy receive errors */
+ regs_buff[22] = adapter->phy_stats.receive_errors;
+ regs_buff[23] = regs_buff[13]; /* mdix mode */
+ }
+ regs_buff[21] = 0; /* was idle_errors */
+ e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
+ regs_buff[24] = (u32)phy_data; /* phy local receiver status */
+ regs_buff[25] = regs_buff[24]; /* phy remote receiver status */
+}
+
+static int e1000_get_eeprom_len(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.nvm.word_size * 2;
+}
+
+static int e1000_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word;
+ int last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = adapter->pdev->vendor | (adapter->pdev->device << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ ret_val = e1000_read_nvm(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ } else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = e1000_read_nvm(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ if (ret_val) {
+ /* a read error occurred, throw away the result */
+ memset(eeprom_buff, 0xff, sizeof(u16) *
+ (last_word - first_word + 1));
+ } else {
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+ }
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int e1000_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len;
+ int first_word;
+ int last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (adapter->pdev->vendor | (adapter->pdev->device << 16)))
+ return -EFAULT;
+
+ if (adapter->flags & FLAG_READ_ONLY_NVM)
+ return -EINVAL;
+
+ max_len = hw->nvm.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = e1000_read_nvm(hw, first_word, 1, &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0))
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = e1000_read_nvm(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+
+ if (ret_val)
+ goto out;
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = e1000_write_nvm(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ if (ret_val)
+ goto out;
+
+ /*
+ * Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for applicable controllers
+ */
+ if ((first_word <= NVM_CHECKSUM_REG) ||
+ (hw->mac.type == e1000_82583) ||
+ (hw->mac.type == e1000_82574) ||
+ (hw->mac.type == e1000_82573))
+ ret_val = e1000e_update_nvm_checksum(hw);
+
+out:
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void e1000_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+
+ strncpy(drvinfo->driver, e1000e_driver_name,
+ sizeof(drvinfo->driver) - 1);
+ strncpy(drvinfo->version, e1000e_driver_version,
+ sizeof(drvinfo->version) - 1);
+
+ /*
+ * EEPROM image version # is reported as firmware version # for
+ * PCI-E controllers
+ */
+ snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
+ (adapter->eeprom_vers & 0xF000) >> 12,
+ (adapter->eeprom_vers & 0x0FF0) >> 4,
+ (adapter->eeprom_vers & 0x000F));
+
+ strncpy(drvinfo->fw_version, firmware_version,
+ sizeof(drvinfo->fw_version) - 1);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info) - 1);
+ drvinfo->regdump_len = e1000_get_regs_len(netdev);
+ drvinfo->eedump_len = e1000_get_eeprom_len(netdev);
+}
+
+static void e1000_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+
+ ring->rx_max_pending = E1000_MAX_RXD;
+ ring->tx_max_pending = E1000_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int e1000_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_ring *tx_ring, *tx_old;
+ struct e1000_ring *rx_ring, *rx_old;
+ int err;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (netif_running(adapter->netdev))
+ e1000e_down(adapter);
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ err = -ENOMEM;
+ tx_ring = kmemdup(tx_old, sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!tx_ring)
+ goto err_alloc_tx;
+
+ rx_ring = kmemdup(rx_old, sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!rx_ring)
+ goto err_alloc_rx;
+
+ adapter->tx_ring = tx_ring;
+ adapter->rx_ring = rx_ring;
+
+ rx_ring->count = max(ring->rx_pending, (u32)E1000_MIN_RXD);
+ rx_ring->count = min(rx_ring->count, (u32)(E1000_MAX_RXD));
+ rx_ring->count = ALIGN(rx_ring->count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ tx_ring->count = max(ring->tx_pending, (u32)E1000_MIN_TXD);
+ tx_ring->count = min(tx_ring->count, (u32)(E1000_MAX_TXD));
+ tx_ring->count = ALIGN(tx_ring->count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ err = e1000e_setup_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+ err = e1000e_setup_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /*
+ * restore the old in order to free it,
+ * then add in the new
+ */
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ e1000e_free_rx_resources(adapter);
+ e1000e_free_tx_resources(adapter);
+ kfree(tx_old);
+ kfree(rx_old);
+ adapter->rx_ring = rx_ring;
+ adapter->tx_ring = tx_ring;
+ err = e1000e_up(adapter);
+ if (err)
+ goto err_setup;
+ }
+
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return 0;
+err_setup_tx:
+ e1000e_free_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ kfree(rx_ring);
+err_alloc_rx:
+ kfree(tx_ring);
+err_alloc_tx:
+ e1000e_up(adapter);
+err_setup:
+ clear_bit(__E1000_RESETTING, &adapter->state);
+ return err;
+}
+
+static bool reg_pattern_test(struct e1000_adapter *adapter, u64 *data,
+ int reg, int offset, u32 mask, u32 write)
+{
+ u32 pat, val;
+ static const u32 test[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ for (pat = 0; pat < ARRAY_SIZE(test); pat++) {
+ E1000_WRITE_REG_ARRAY(&adapter->hw, reg, offset,
+ (test[pat] & write));
+ val = E1000_READ_REG_ARRAY(&adapter->hw, reg, offset);
+ if (val != (test[pat] & write & mask)) {
+ e_err("pattern test reg %04X failed: got 0x%08X "
+ "expected 0x%08X\n", reg + offset, val,
+ (test[pat] & write & mask));
+ *data = reg;
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static bool reg_set_and_check(struct e1000_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ u32 val;
+ __ew32(&adapter->hw, reg, write & mask);
+ val = __er32(&adapter->hw, reg);
+ if ((write & mask) != (val & mask)) {
+ e_err("set/check reg %04X test failed: got 0x%08X "
+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
+ *data = reg;
+ return 1;
+ }
+ return 0;
+}
+#define REG_PATTERN_TEST_ARRAY(reg, offset, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, offset, mask, write)) \
+ return 1; \
+ } while (0)
+#define REG_PATTERN_TEST(reg, mask, write) \
+ REG_PATTERN_TEST_ARRAY(reg, 0, mask, write)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+static int e1000_reg_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ u32 value;
+ u32 before;
+ u32 after;
+ u32 i;
+ u32 toggle;
+ u32 mask;
+
+ /*
+ * The status register is Read Only, so a write should fail.
+ * Some bits that get toggled are ignored.
+ */
+ switch (mac->type) {
+ /* there are several bits on newer hardware that are r/w */
+ case e1000_82571:
+ case e1000_82572:
+ case e1000_80003es2lan:
+ toggle = 0x7FFFF3FF;
+ break;
+ default:
+ toggle = 0x7FFFF033;
+ break;
+ }
+
+ before = er32(STATUS);
+ value = (er32(STATUS) & toggle);
+ ew32(STATUS, toggle);
+ after = er32(STATUS) & toggle;
+ if (value != after) {
+ e_err("failed STATUS register test got: 0x%08X expected: "
+ "0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ ew32(STATUS, before);
+
+ if (!(adapter->flags & FLAG_IS_ICH)) {
+ REG_PATTERN_TEST(E1000_FCAL, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_FCAH, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_FCT, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_VET, 0x0000FFFF, 0xFFFFFFFF);
+ }
+
+ REG_PATTERN_TEST(E1000_RDTR, 0x0000FFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_RDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_RDLEN, 0x000FFF80, 0x000FFFFF);
+ REG_PATTERN_TEST(E1000_RDH, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_RDT, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_FCRTH, 0x0000FFF8, 0x0000FFF8);
+ REG_PATTERN_TEST(E1000_FCTTV, 0x0000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_TIPG, 0x3FFFFFFF, 0x3FFFFFFF);
+ REG_PATTERN_TEST(E1000_TDBAH, 0xFFFFFFFF, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_TDLEN, 0x000FFF80, 0x000FFFFF);
+
+ REG_SET_AND_CHECK(E1000_RCTL, 0xFFFFFFFF, 0x00000000);
+
+ before = ((adapter->flags & FLAG_IS_ICH) ? 0x06C3B33E : 0x06DFB3FE);
+ REG_SET_AND_CHECK(E1000_RCTL, before, 0x003FFFFB);
+ REG_SET_AND_CHECK(E1000_TCTL, 0xFFFFFFFF, 0x00000000);
+
+ REG_SET_AND_CHECK(E1000_RCTL, before, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_RDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ if (!(adapter->flags & FLAG_IS_ICH))
+ REG_PATTERN_TEST(E1000_TXCW, 0xC000FFFF, 0x0000FFFF);
+ REG_PATTERN_TEST(E1000_TDBAL, 0xFFFFFFF0, 0xFFFFFFFF);
+ REG_PATTERN_TEST(E1000_TIDV, 0x0000FFFF, 0x0000FFFF);
+ mask = 0x8003FFFF;
+ switch (mac->type) {
+ case e1000_ich10lan:
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ mask |= (1 << 18);
+ break;
+ default:
+ break;
+ }
+ for (i = 0; i < mac->rar_entry_count; i++)
+ REG_PATTERN_TEST_ARRAY(E1000_RA, ((i << 1) + 1),
+ mask, 0xFFFFFFFF);
+
+ for (i = 0; i < mac->mta_reg_count; i++)
+ REG_PATTERN_TEST_ARRAY(E1000_MTA, i, 0xFFFFFFFF, 0xFFFFFFFF);
+
+ *data = 0;
+ return 0;
+}
+
+static int e1000_eeprom_test(struct e1000_adapter *adapter, u64 *data)
+{
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ if ((e1000_read_nvm(&adapter->hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ return *data;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16) NVM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t e1000_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *) data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= er32(ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int e1000_intr_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mask;
+ u32 shared_int = 1;
+ u32 irq = adapter->pdev->irq;
+ int i;
+ int ret_val = 0;
+ int int_mode = E1000E_INT_MODE_LEGACY;
+
+ *data = 0;
+
+ /* NOTE: we don't test MSI/MSI-X interrupts here, yet */
+ if (adapter->int_mode == E1000E_INT_MODE_MSIX) {
+ int_mode = adapter->int_mode;
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ e1000e_set_interrupt_capability(adapter);
+ }
+ /* Hook up test interrupt handler just for this test */
+ if (!request_irq(irq, e1000_test_intr, IRQF_PROBE_SHARED, netdev->name,
+ netdev)) {
+ shared_int = 0;
+ } else if (request_irq(irq, e1000_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ ret_val = -1;
+ goto out;
+ }
+ e_info("testing %s interrupt\n", (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ /* Test each interrupt */
+ for (i = 0; i < 10; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (adapter->flags & FLAG_IS_ICH) {
+ switch (mask) {
+ case E1000_ICR_RXSEQ:
+ continue;
+ case 0x00000100:
+ if (adapter->hw.mac.type == e1000_ich8lan ||
+ adapter->hw.mac.type == e1000_ich9lan)
+ continue;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (!shared_int) {
+ /*
+ * Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, mask);
+ ew32(ICS, mask);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /*
+ * Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMS, mask);
+ ew32(ICS, mask);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /*
+ * Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ ew32(IMC, ~mask & 0x00007FFF);
+ ew32(ICS, ~mask & 0x00007FFF);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ ew32(IMC, 0xFFFFFFFF);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+out:
+ if (int_mode == E1000E_INT_MODE_MSIX) {
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = int_mode;
+ e1000e_set_interrupt_capability(adapter);
+ }
+
+ return ret_val;
+}
+
+static void e1000_free_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int i;
+
+ if (tx_ring->desc && tx_ring->buffer_info) {
+ for (i = 0; i < tx_ring->count; i++) {
+ if (tx_ring->buffer_info[i].dma)
+ dma_unmap_single(&pdev->dev,
+ tx_ring->buffer_info[i].dma,
+ tx_ring->buffer_info[i].length,
+ DMA_TO_DEVICE);
+ if (tx_ring->buffer_info[i].skb)
+ dev_kfree_skb(tx_ring->buffer_info[i].skb);
+ }
+ }
+
+ if (rx_ring->desc && rx_ring->buffer_info) {
+ for (i = 0; i < rx_ring->count; i++) {
+ if (rx_ring->buffer_info[i].dma)
+ dma_unmap_single(&pdev->dev,
+ rx_ring->buffer_info[i].dma,
+ 2048, DMA_FROM_DEVICE);
+ if (rx_ring->buffer_info[i].skb)
+ dev_kfree_skb(rx_ring->buffer_info[i].skb);
+ }
+ }
+
+ if (tx_ring->desc) {
+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+ tx_ring->desc = NULL;
+ }
+ if (rx_ring->desc) {
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+ rx_ring->desc = NULL;
+ }
+
+ kfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+ kfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+}
+
+static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ int i;
+ int ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+
+ if (!tx_ring->count)
+ tx_ring->count = E1000_DEFAULT_TXD;
+
+ tx_ring->buffer_info = kcalloc(tx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(tx_ring->buffer_info)) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+ tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc) {
+ ret_val = 2;
+ goto err_nomem;
+ }
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ ew32(TDBAL, ((u64) tx_ring->dma & 0x00000000FFFFFFFF));
+ ew32(TDBAH, ((u64) tx_ring->dma >> 32));
+ ew32(TDLEN, tx_ring->count * sizeof(struct e1000_tx_desc));
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ ew32(TCTL, E1000_TCTL_PSP | E1000_TCTL_EN | E1000_TCTL_MULR |
+ E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
+ E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
+
+ for (i = 0; i < tx_ring->count; i++) {
+ struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i);
+ struct sk_buff *skb;
+ unsigned int skb_size = 1024;
+
+ skb = alloc_skb(skb_size, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+ skb_put(skb, skb_size);
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[i].length = skb->len;
+ tx_ring->buffer_info[i].dma =
+ dma_map_single(&pdev->dev, skb->data, skb->len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev,
+ tx_ring->buffer_info[i].dma)) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+ tx_desc->buffer_addr = cpu_to_le64(tx_ring->buffer_info[i].dma);
+ tx_desc->lower.data = cpu_to_le32(skb->len);
+ tx_desc->lower.data |= cpu_to_le32(E1000_TXD_CMD_EOP |
+ E1000_TXD_CMD_IFCS |
+ E1000_TXD_CMD_RS);
+ tx_desc->upper.data = 0;
+ }
+
+ /* Setup Rx descriptor ring and Rx buffers */
+
+ if (!rx_ring->count)
+ rx_ring->count = E1000_DEFAULT_RXD;
+
+ rx_ring->buffer_info = kcalloc(rx_ring->count,
+ sizeof(struct e1000_buffer),
+ GFP_KERNEL);
+ if (!(rx_ring->buffer_info)) {
+ ret_val = 5;
+ goto err_nomem;
+ }
+
+ rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
+ rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+ if (!rx_ring->desc) {
+ ret_val = 6;
+ goto err_nomem;
+ }
+ rx_ring->next_to_use = 0;
+ rx_ring->next_to_clean = 0;
+
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ ew32(RDBAL, ((u64) rx_ring->dma & 0xFFFFFFFF));
+ ew32(RDBAH, ((u64) rx_ring->dma >> 32));
+ ew32(RDLEN, rx_ring->size);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+ E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_LPE |
+ E1000_RCTL_SBP | E1000_RCTL_SECRC |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+ ew32(RCTL, rctl);
+
+ for (i = 0; i < rx_ring->count; i++) {
+ struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
+ struct sk_buff *skb;
+
+ skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
+ if (!skb) {
+ ret_val = 7;
+ goto err_nomem;
+ }
+ skb_reserve(skb, NET_IP_ALIGN);
+ rx_ring->buffer_info[i].skb = skb;
+ rx_ring->buffer_info[i].dma =
+ dma_map_single(&pdev->dev, skb->data, 2048,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev,
+ rx_ring->buffer_info[i].dma)) {
+ ret_val = 8;
+ goto err_nomem;
+ }
+ rx_desc->buffer_addr =
+ cpu_to_le64(rx_ring->buffer_info[i].dma);
+ memset(skb->data, 0x00, skb->len);
+ }
+
+ return 0;
+
+err_nomem:
+ e1000_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void e1000_phy_disable_receiver(struct e1000_adapter *adapter)
+{
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ e1e_wphy(&adapter->hw, 29, 0x001F);
+ e1e_wphy(&adapter->hw, 30, 0x8FFC);
+ e1e_wphy(&adapter->hw, 29, 0x001A);
+ e1e_wphy(&adapter->hw, 30, 0x8FF0);
+}
+
+static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+ u16 phy_reg = 0;
+ s32 ret_val = 0;
+
+ hw->mac.autoneg = 0;
+
+ if (hw->phy.type == e1000_phy_ife) {
+ /* force 100, set loopback */
+ e1e_wphy(hw, PHY_CONTROL, 0x6100);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_100 |/* Force Speed to 100 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ ew32(CTRL, ctrl_reg);
+ e1e_flush();
+ udelay(500);
+
+ return 0;
+ }
+
+ /* Specific PHY configuration for loopback */
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ /* Auto-MDI/MDIX Off */
+ e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ e1e_wphy(hw, PHY_CONTROL, 0x9140);
+ /* autoneg off */
+ e1e_wphy(hw, PHY_CONTROL, 0x8140);
+ break;
+ case e1000_phy_gg82563:
+ e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x1CC);
+ break;
+ case e1000_phy_bm:
+ /* Set Default MAC Interface speed to 1GB */
+ e1e_rphy(hw, PHY_REG(2, 21), &phy_reg);
+ phy_reg &= ~0x0007;
+ phy_reg |= 0x006;
+ e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
+ /* Assert SW reset for above settings to take effect */
+ e1000e_commit_phy(hw);
+ mdelay(1);
+ /* Force Full Duplex */
+ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+ e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
+ /* Set Link Up (in force link) */
+ e1e_rphy(hw, PHY_REG(776, 16), &phy_reg);
+ e1e_wphy(hw, PHY_REG(776, 16), phy_reg | 0x0040);
+ /* Force Link */
+ e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
+ e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x0040);
+ /* Set Early Link Enable */
+ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+ e1e_wphy(hw, PHY_REG(769, 20), phy_reg | 0x0400);
+ break;
+ case e1000_phy_82577:
+ case e1000_phy_82578:
+ /* Workaround: K1 must be disabled for stable 1Gbps operation */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_err("Cannot setup 1Gbps loopback.\n");
+ return ret_val;
+ }
+ e1000_configure_k1_ich8lan(hw, false);
+ hw->phy.ops.release(hw);
+ break;
+ case e1000_phy_82579:
+ /* Disable PHY energy detect power down */
+ e1e_rphy(hw, PHY_REG(0, 21), &phy_reg);
+ e1e_wphy(hw, PHY_REG(0, 21), phy_reg & ~(1 << 3));
+ /* Disable full chip energy detect */
+ e1e_rphy(hw, PHY_REG(776, 18), &phy_reg);
+ e1e_wphy(hw, PHY_REG(776, 18), phy_reg | 1);
+ /* Enable loopback on the PHY */
+#define I82577_PHY_LBK_CTRL 19
+ e1e_wphy(hw, I82577_PHY_LBK_CTRL, 0x8001);
+ break;
+ default:
+ break;
+ }
+
+ /* force 1000, set loopback */
+ e1e_wphy(hw, PHY_CONTROL, 0x4140);
+ mdelay(250);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = er32(CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD); /* Force Duplex to FULL */
+
+ if (adapter->flags & FLAG_IS_ICH)
+ ctrl_reg |= E1000_CTRL_SLU; /* Set Link Up */
+
+ if (hw->phy.media_type == e1000_media_type_copper &&
+ hw->phy.type == e1000_phy_m88) {
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+ } else {
+ /*
+ * Set the ILOS bit on the fiber Nic if half duplex link is
+ * detected.
+ */
+ if ((er32(STATUS) & E1000_STATUS_FD) == 0)
+ ctrl_reg |= (E1000_CTRL_ILOS | E1000_CTRL_SLU);
+ }
+
+ ew32(CTRL, ctrl_reg);
+
+ /*
+ * Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy.type == e1000_phy_m88)
+ e1000_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl = er32(CTRL);
+ int link = 0;
+
+ /* special requirements for 82571/82572 fiber adapters */
+
+ /*
+ * jump through hoops to make sure link is up because serdes
+ * link is hardwired up
+ */
+ ctrl |= E1000_CTRL_SLU;
+ ew32(CTRL, ctrl);
+
+ /* disable autoneg */
+ ctrl = er32(TXCW);
+ ctrl &= ~(1 << 31);
+ ew32(TXCW, ctrl);
+
+ link = (er32(STATUS) & E1000_STATUS_LU);
+
+ if (!link) {
+ /* set invert loss of signal */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_ILOS;
+ ew32(CTRL, ctrl);
+ }
+
+ /*
+ * special write to serdes control register to enable SerDes analog
+ * loopback
+ */
+#define E1000_SERDES_LB_ON 0x410
+ ew32(SCTL, E1000_SERDES_LB_ON);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ return 0;
+}
+
+/* only call this for fiber/serdes connections to es2lan */
+static int e1000_set_es2lan_mac_loopback(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrlext = er32(CTRL_EXT);
+ u32 ctrl = er32(CTRL);
+
+ /*
+ * save CTRL_EXT to restore later, reuse an empty variable (unused
+ * on mac_type 80003es2lan)
+ */
+ adapter->tx_fifo_head = ctrlext;
+
+ /* clear the serdes mode bits, putting the device into mac loopback */
+ ctrlext &= ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES;
+ ew32(CTRL_EXT, ctrlext);
+
+ /* force speed to 1000/FD, link up */
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX |
+ E1000_CTRL_SPD_1000 | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* set mac loopback */
+ ctrl = er32(RCTL);
+ ctrl |= E1000_RCTL_LBM_MAC;
+ ew32(RCTL, ctrl);
+
+ /* set testing mode parameters (no need to reset later) */
+#define KMRNCTRLSTA_OPMODE (0x1F << 16)
+#define KMRNCTRLSTA_OPMODE_1GB_FD_GMII 0x0582
+ ew32(KMRNCTRLSTA,
+ (KMRNCTRLSTA_OPMODE | KMRNCTRLSTA_OPMODE_1GB_FD_GMII));
+
+ return 0;
+}
+
+static int e1000_setup_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
+ switch (hw->mac.type) {
+ case e1000_80003es2lan:
+ return e1000_set_es2lan_mac_loopback(adapter);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ return e1000_set_82571_fiber_loopback(adapter);
+ break;
+ default:
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_LBM_TCVR;
+ ew32(RCTL, rctl);
+ return 0;
+ }
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
+ return e1000_integrated_phy_loopback(adapter);
+ }
+
+ return 7;
+}
+
+static void e1000_loopback_cleanup(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ ew32(RCTL, rctl);
+
+ switch (hw->mac.type) {
+ case e1000_80003es2lan:
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
+ /* restore CTRL_EXT, stealing space from tx_fifo_head */
+ ew32(CTRL_EXT, adapter->tx_fifo_head);
+ adapter->tx_fifo_head = 0;
+ }
+ /* fall through */
+ case e1000_82571:
+ case e1000_82572:
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes) {
+#define E1000_SERDES_LB_OFF 0x400
+ ew32(SCTL, E1000_SERDES_LB_OFF);
+ e1e_flush();
+ usleep_range(10000, 20000);
+ break;
+ }
+ /* Fall Through */
+ default:
+ hw->mac.autoneg = 1;
+ if (hw->phy.type == e1000_phy_gg82563)
+ e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, 0x180);
+ e1e_rphy(hw, PHY_CONTROL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ e1e_wphy(hw, PHY_CONTROL, phy_reg);
+ e1000e_commit_phy(hw);
+ }
+ break;
+ }
+}
+
+static void e1000_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int e1000_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF)
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF))
+ return 0;
+ return 13;
+}
+
+static int e1000_run_loopback_test(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *tx_ring = &adapter->test_tx_ring;
+ struct e1000_ring *rx_ring = &adapter->test_rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int i, j, k, l;
+ int lc;
+ int good_cnt;
+ int ret_val = 0;
+ unsigned long time;
+
+ ew32(RDT, rx_ring->count - 1);
+
+ /*
+ * Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ k = 0;
+ l = 0;
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ for (i = 0; i < 64; i++) { /* send the packets */
+ e1000_create_lbtest_frame(tx_ring->buffer_info[k].skb,
+ 1024);
+ dma_sync_single_for_device(&pdev->dev,
+ tx_ring->buffer_info[k].dma,
+ tx_ring->buffer_info[k].length,
+ DMA_TO_DEVICE);
+ k++;
+ if (k == tx_ring->count)
+ k = 0;
+ }
+ ew32(TDT, k);
+ e1e_flush();
+ msleep(200);
+ time = jiffies; /* set the start time for the receive */
+ good_cnt = 0;
+ do { /* receive the sent packets */
+ dma_sync_single_for_cpu(&pdev->dev,
+ rx_ring->buffer_info[l].dma, 2048,
+ DMA_FROM_DEVICE);
+
+ ret_val = e1000_check_lbtest_frame(
+ rx_ring->buffer_info[l].skb, 1024);
+ if (!ret_val)
+ good_cnt++;
+ l++;
+ if (l == rx_ring->count)
+ l = 0;
+ /*
+ * time + 20 msecs (200 msecs on 2.4) is more than
+ * enough time to complete the receives, if it's
+ * exceeded, break and error off
+ */
+ } while ((good_cnt < 64) && !time_after(jiffies, time + 20));
+ if (good_cnt != 64) {
+ ret_val = 13; /* ret_val is the same as mis-compare */
+ break;
+ }
+ if (jiffies >= (time + 20)) {
+ ret_val = 14; /* error code for time out error */
+ break;
+ }
+ } /* end loop count loop */
+ return ret_val;
+}
+
+static int e1000_loopback_test(struct e1000_adapter *adapter, u64 *data)
+{
+ /*
+ * PHY loopback cannot be performed if SoL/IDER
+ * sessions are active
+ */
+ if (e1000_check_reset_block(&adapter->hw)) {
+ e_err("Cannot do PHY loopback test when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+
+ *data = e1000_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+
+ *data = e1000_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+
+ *data = e1000_run_loopback_test(adapter);
+ e1000_loopback_cleanup(adapter);
+
+err_loopback:
+ e1000_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ *data = 0;
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->mac.serdes_has_link = false;
+
+ /*
+ * On some blade server designs, link establishment
+ * could take as long as 2-3 minutes
+ */
+ do {
+ hw->mac.ops.check_for_link(hw);
+ if (hw->mac.serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ hw->mac.ops.check_for_link(hw);
+ if (hw->mac.autoneg)
+ /*
+ * On some Phy/switch combinations, link establishment
+ * can take a few seconds more than expected.
+ */
+ msleep(5000);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU))
+ *data = 1;
+ }
+ return *data;
+}
+
+static int e1000e_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return E1000_TEST_LEN;
+ case ETH_SS_STATS:
+ return E1000_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void e1000_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ u16 autoneg_advertised;
+ u8 forced_speed_duplex;
+ u8 autoneg;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__E1000_TESTING, &adapter->state);
+
+ if (!if_running) {
+ /* Get control of and reset hardware */
+ if (adapter->flags & FLAG_HAS_AMT)
+ e1000e_get_hw_control(adapter);
+
+ e1000e_power_up_phy(adapter);
+
+ adapter->hw.phy.autoneg_wait_to_complete = 1;
+ e1000e_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
+ }
+
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+ autoneg = adapter->hw.mac.autoneg;
+
+ e_info("offline testing starting\n");
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+
+ if (e1000_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000e_reset(adapter);
+ if (e1000_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000e_reset(adapter);
+ if (e1000_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ e1000e_reset(adapter);
+ if (e1000_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* force this routine to wait until autoneg complete/timeout */
+ adapter->hw.phy.autoneg_wait_to_complete = 1;
+ e1000e_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
+
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+ adapter->hw.mac.autoneg = autoneg;
+ e1000e_reset(adapter);
+
+ clear_bit(__E1000_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ /* Online tests */
+
+ e_info("online testing starting\n");
+
+ /* register, eeprom, intr and loopback tests not run online */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ if (e1000_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ clear_bit(__E1000_TESTING, &adapter->state);
+ }
+
+ if (!if_running) {
+ e1000e_reset(adapter);
+
+ if (adapter->flags & FLAG_HAS_AMT)
+ e1000e_release_hw_control(adapter);
+ }
+
+ msleep_interruptible(4 * 1000);
+}
+
+static void e1000_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = 0;
+ wol->wolopts = 0;
+
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC | WAKE_PHY;
+
+ /* apply any specific unsupported masks here */
+ if (adapter->flags & FLAG_NO_WAKE_UCAST) {
+ wol->supported &= ~WAKE_UCAST;
+
+ if (adapter->wol & E1000_WUFC_EX)
+ e_err("Interface does not support directed (unicast) "
+ "frame wake-up packets\n");
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & E1000_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+}
+
+static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (!(adapter->flags & FLAG_HAS_WOL) ||
+ !device_can_wakeup(&adapter->pdev->dev) ||
+ (wol->wolopts & ~(WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
+ WAKE_MAGIC | WAKE_PHY)))
+ return -EOPNOTSUPP;
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= E1000_WUFC_LNKC;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+static int e1000_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ if (!hw->mac.ops.blink_led)
+ return 2; /* cycle on/off twice per second */
+
+ hw->mac.ops.blink_led(hw);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ if (hw->phy.type == e1000_phy_ife)
+ e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+ hw->mac.ops.led_off(hw);
+ hw->mac.ops.cleanup_led(hw);
+ break;
+
+ case ETHTOOL_ID_ON:
+ adapter->hw.mac.ops.led_on(&adapter->hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ adapter->hw.mac.ops.led_off(&adapter->hw);
+ break;
+ }
+ return 0;
+}
+
+static int e1000_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->itr_setting <= 4)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
+
+ return 0;
+}
+
+static int e1000_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 4) &&
+ (ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if (ec->rx_coalesce_usecs == 4) {
+ adapter->itr = adapter->itr_setting = 4;
+ } else if (ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = 20000;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = (1000000 / ec->rx_coalesce_usecs);
+ adapter->itr_setting = adapter->itr & ~3;
+ }
+
+ if (adapter->itr_setting != 0)
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ else
+ ew32(ITR, 0);
+
+ return 0;
+}
+
+static int e1000_nway_reset(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (!netif_running(netdev))
+ return -EAGAIN;
+
+ if (!adapter->hw.mac.autoneg)
+ return -EINVAL;
+
+ e1000e_reinit_locked(adapter);
+
+ return 0;
+}
+
+static void e1000_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct rtnl_link_stats64 net_stats;
+ int i;
+ char *p = NULL;
+
+ e1000e_get_stats64(netdev, &net_stats);
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ switch (e1000_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) &net_stats +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ case E1000_STATS:
+ p = (char *) adapter +
+ e1000_gstrings_stats[i].stat_offset;
+ break;
+ default:
+ data[i] = 0;
+ continue;
+ }
+
+ data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+}
+
+static void e1000_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, e1000_gstrings_test, sizeof(e1000_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, e1000_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int e1000e_set_flags(struct net_device *netdev, u32 data)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ bool need_reset = false;
+ int rc;
+
+ need_reset = (data & ETH_FLAG_RXVLAN) !=
+ (netdev->features & NETIF_F_HW_VLAN_RX);
+
+ rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
+ ETH_FLAG_TXVLAN);
+
+ if (rc)
+ return rc;
+
+ if (need_reset) {
+ if (netif_running(netdev))
+ e1000e_reinit_locked(adapter);
+ else
+ e1000e_reset(adapter);
+ }
+
+ return 0;
+}
+
+static const struct ethtool_ops e1000_ethtool_ops = {
+ .get_settings = e1000_get_settings,
+ .set_settings = e1000_set_settings,
+ .get_drvinfo = e1000_get_drvinfo,
+ .get_regs_len = e1000_get_regs_len,
+ .get_regs = e1000_get_regs,
+ .get_wol = e1000_get_wol,
+ .set_wol = e1000_set_wol,
+ .get_msglevel = e1000_get_msglevel,
+ .set_msglevel = e1000_set_msglevel,
+ .nway_reset = e1000_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = e1000_get_eeprom_len,
+ .get_eeprom = e1000_get_eeprom,
+ .set_eeprom = e1000_set_eeprom,
+ .get_ringparam = e1000_get_ringparam,
+ .set_ringparam = e1000_set_ringparam,
+ .get_pauseparam = e1000_get_pauseparam,
+ .set_pauseparam = e1000_set_pauseparam,
+ .get_rx_csum = e1000_get_rx_csum,
+ .set_rx_csum = e1000_set_rx_csum,
+ .get_tx_csum = e1000_get_tx_csum,
+ .set_tx_csum = e1000_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = e1000_set_tso,
+ .self_test = e1000_diag_test,
+ .get_strings = e1000_get_strings,
+ .set_phys_id = e1000_set_phys_id,
+ .get_ethtool_stats = e1000_get_ethtool_stats,
+ .get_sset_count = e1000e_get_sset_count,
+ .get_coalesce = e1000_get_coalesce,
+ .set_coalesce = e1000_set_coalesce,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = e1000e_set_flags,
+};
+
+void e1000e_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &e1000_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+
+struct e1000_hw;
+struct e1000_adapter;
+
+#include "defines.h"
+
+#define er32(reg) __er32(hw, E1000_##reg)
+#define ew32(reg,val) __ew32(hw, E1000_##reg, (val))
+#define e1e_flush() er32(STATUS)
+
+#define E1000_WRITE_REG_ARRAY(a, reg, offset, value) \
+ (writel((value), ((a)->hw_addr + reg + ((offset) << 2))))
+
+#define E1000_READ_REG_ARRAY(a, reg, offset) \
+ (readl((a)->hw_addr + reg + ((offset) << 2)))
+
+enum e1e_registers {
+ E1000_CTRL = 0x00000, /* Device Control - RW */
+ E1000_STATUS = 0x00008, /* Device Status - RO */
+ E1000_EECD = 0x00010, /* EEPROM/Flash Control - RW */
+ E1000_EERD = 0x00014, /* EEPROM Read - RW */
+ E1000_CTRL_EXT = 0x00018, /* Extended Device Control - RW */
+ E1000_FLA = 0x0001C, /* Flash Access - RW */
+ E1000_MDIC = 0x00020, /* MDI Control - RW */
+ E1000_SCTL = 0x00024, /* SerDes Control - RW */
+ E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */
+ E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */
+ E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */
+ E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */
+ E1000_FCT = 0x00030, /* Flow Control Type - RW */
+ E1000_VET = 0x00038, /* VLAN Ether Type - RW */
+ E1000_ICR = 0x000C0, /* Interrupt Cause Read - R/clr */
+ E1000_ITR = 0x000C4, /* Interrupt Throttling Rate - RW */
+ E1000_ICS = 0x000C8, /* Interrupt Cause Set - WO */
+ E1000_IMS = 0x000D0, /* Interrupt Mask Set - RW */
+ E1000_IMC = 0x000D8, /* Interrupt Mask Clear - WO */
+ E1000_EIAC_82574 = 0x000DC, /* Ext. Interrupt Auto Clear - RW */
+ E1000_IAM = 0x000E0, /* Interrupt Acknowledge Auto Mask */
+ E1000_IVAR = 0x000E4, /* Interrupt Vector Allocation - RW */
+ E1000_EITR_82574_BASE = 0x000E8, /* Interrupt Throttling - RW */
+#define E1000_EITR_82574(_n) (E1000_EITR_82574_BASE + (_n << 2))
+ E1000_RCTL = 0x00100, /* Rx Control - RW */
+ E1000_FCTTV = 0x00170, /* Flow Control Transmit Timer Value - RW */
+ E1000_TXCW = 0x00178, /* Tx Configuration Word - RW */
+ E1000_RXCW = 0x00180, /* Rx Configuration Word - RO */
+ E1000_TCTL = 0x00400, /* Tx Control - RW */
+ E1000_TCTL_EXT = 0x00404, /* Extended Tx Control - RW */
+ E1000_TIPG = 0x00410, /* Tx Inter-packet gap -RW */
+ E1000_AIT = 0x00458, /* Adaptive Interframe Spacing Throttle -RW */
+ E1000_LEDCTL = 0x00E00, /* LED Control - RW */
+ E1000_EXTCNF_CTRL = 0x00F00, /* Extended Configuration Control */
+ E1000_EXTCNF_SIZE = 0x00F08, /* Extended Configuration Size */
+ E1000_PHY_CTRL = 0x00F10, /* PHY Control Register in CSR */
+#define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */
+ E1000_PBA = 0x01000, /* Packet Buffer Allocation - RW */
+ E1000_PBS = 0x01008, /* Packet Buffer Size */
+ E1000_EEMNGCTL = 0x01010, /* MNG EEprom Control */
+ E1000_EEWR = 0x0102C, /* EEPROM Write Register - RW */
+ E1000_FLOP = 0x0103C, /* FLASH Opcode Register */
+ E1000_PBA_ECC = 0x01100, /* PBA ECC Register */
+ E1000_ERT = 0x02008, /* Early Rx Threshold - RW */
+ E1000_FCRTL = 0x02160, /* Flow Control Receive Threshold Low - RW */
+ E1000_FCRTH = 0x02168, /* Flow Control Receive Threshold High - RW */
+ E1000_PSRCTL = 0x02170, /* Packet Split Receive Control - RW */
+ E1000_RDBAL = 0x02800, /* Rx Descriptor Base Address Low - RW */
+ E1000_RDBAH = 0x02804, /* Rx Descriptor Base Address High - RW */
+ E1000_RDLEN = 0x02808, /* Rx Descriptor Length - RW */
+ E1000_RDH = 0x02810, /* Rx Descriptor Head - RW */
+ E1000_RDT = 0x02818, /* Rx Descriptor Tail - RW */
+ E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */
+ E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */
+#define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8))
+ E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */
+
+/* Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ *
+ */
+#define E1000_RDBAL_REG(_n) (E1000_RDBAL + (_n << 8))
+ E1000_KABGTXD = 0x03004, /* AFE Band Gap Transmit Ref Data */
+ E1000_TDBAL = 0x03800, /* Tx Descriptor Base Address Low - RW */
+ E1000_TDBAH = 0x03804, /* Tx Descriptor Base Address High - RW */
+ E1000_TDLEN = 0x03808, /* Tx Descriptor Length - RW */
+ E1000_TDH = 0x03810, /* Tx Descriptor Head - RW */
+ E1000_TDT = 0x03818, /* Tx Descriptor Tail - RW */
+ E1000_TIDV = 0x03820, /* Tx Interrupt Delay Value - RW */
+ E1000_TXDCTL_BASE = 0x03828, /* Tx Descriptor Control - RW */
+#define E1000_TXDCTL(_n) (E1000_TXDCTL_BASE + (_n << 8))
+ E1000_TADV = 0x0382C, /* Tx Interrupt Absolute Delay Val - RW */
+ E1000_TARC_BASE = 0x03840, /* Tx Arbitration Count (0) */
+#define E1000_TARC(_n) (E1000_TARC_BASE + (_n << 8))
+ E1000_CRCERRS = 0x04000, /* CRC Error Count - R/clr */
+ E1000_ALGNERRC = 0x04004, /* Alignment Error Count - R/clr */
+ E1000_SYMERRS = 0x04008, /* Symbol Error Count - R/clr */
+ E1000_RXERRC = 0x0400C, /* Receive Error Count - R/clr */
+ E1000_MPC = 0x04010, /* Missed Packet Count - R/clr */
+ E1000_SCC = 0x04014, /* Single Collision Count - R/clr */
+ E1000_ECOL = 0x04018, /* Excessive Collision Count - R/clr */
+ E1000_MCC = 0x0401C, /* Multiple Collision Count - R/clr */
+ E1000_LATECOL = 0x04020, /* Late Collision Count - R/clr */
+ E1000_COLC = 0x04028, /* Collision Count - R/clr */
+ E1000_DC = 0x04030, /* Defer Count - R/clr */
+ E1000_TNCRS = 0x04034, /* Tx-No CRS - R/clr */
+ E1000_SEC = 0x04038, /* Sequence Error Count - R/clr */
+ E1000_CEXTERR = 0x0403C, /* Carrier Extension Error Count - R/clr */
+ E1000_RLEC = 0x04040, /* Receive Length Error Count - R/clr */
+ E1000_XONRXC = 0x04048, /* XON Rx Count - R/clr */
+ E1000_XONTXC = 0x0404C, /* XON Tx Count - R/clr */
+ E1000_XOFFRXC = 0x04050, /* XOFF Rx Count - R/clr */
+ E1000_XOFFTXC = 0x04054, /* XOFF Tx Count - R/clr */
+ E1000_FCRUC = 0x04058, /* Flow Control Rx Unsupported Count- R/clr */
+ E1000_PRC64 = 0x0405C, /* Packets Rx (64 bytes) - R/clr */
+ E1000_PRC127 = 0x04060, /* Packets Rx (65-127 bytes) - R/clr */
+ E1000_PRC255 = 0x04064, /* Packets Rx (128-255 bytes) - R/clr */
+ E1000_PRC511 = 0x04068, /* Packets Rx (255-511 bytes) - R/clr */
+ E1000_PRC1023 = 0x0406C, /* Packets Rx (512-1023 bytes) - R/clr */
+ E1000_PRC1522 = 0x04070, /* Packets Rx (1024-1522 bytes) - R/clr */
+ E1000_GPRC = 0x04074, /* Good Packets Rx Count - R/clr */
+ E1000_BPRC = 0x04078, /* Broadcast Packets Rx Count - R/clr */
+ E1000_MPRC = 0x0407C, /* Multicast Packets Rx Count - R/clr */
+ E1000_GPTC = 0x04080, /* Good Packets Tx Count - R/clr */
+ E1000_GORCL = 0x04088, /* Good Octets Rx Count Low - R/clr */
+ E1000_GORCH = 0x0408C, /* Good Octets Rx Count High - R/clr */
+ E1000_GOTCL = 0x04090, /* Good Octets Tx Count Low - R/clr */
+ E1000_GOTCH = 0x04094, /* Good Octets Tx Count High - R/clr */
+ E1000_RNBC = 0x040A0, /* Rx No Buffers Count - R/clr */
+ E1000_RUC = 0x040A4, /* Rx Undersize Count - R/clr */
+ E1000_RFC = 0x040A8, /* Rx Fragment Count - R/clr */
+ E1000_ROC = 0x040AC, /* Rx Oversize Count - R/clr */
+ E1000_RJC = 0x040B0, /* Rx Jabber Count - R/clr */
+ E1000_MGTPRC = 0x040B4, /* Management Packets Rx Count - R/clr */
+ E1000_MGTPDC = 0x040B8, /* Management Packets Dropped Count - R/clr */
+ E1000_MGTPTC = 0x040BC, /* Management Packets Tx Count - R/clr */
+ E1000_TORL = 0x040C0, /* Total Octets Rx Low - R/clr */
+ E1000_TORH = 0x040C4, /* Total Octets Rx High - R/clr */
+ E1000_TOTL = 0x040C8, /* Total Octets Tx Low - R/clr */
+ E1000_TOTH = 0x040CC, /* Total Octets Tx High - R/clr */
+ E1000_TPR = 0x040D0, /* Total Packets Rx - R/clr */
+ E1000_TPT = 0x040D4, /* Total Packets Tx - R/clr */
+ E1000_PTC64 = 0x040D8, /* Packets Tx (64 bytes) - R/clr */
+ E1000_PTC127 = 0x040DC, /* Packets Tx (65-127 bytes) - R/clr */
+ E1000_PTC255 = 0x040E0, /* Packets Tx (128-255 bytes) - R/clr */
+ E1000_PTC511 = 0x040E4, /* Packets Tx (256-511 bytes) - R/clr */
+ E1000_PTC1023 = 0x040E8, /* Packets Tx (512-1023 bytes) - R/clr */
+ E1000_PTC1522 = 0x040EC, /* Packets Tx (1024-1522 Bytes) - R/clr */
+ E1000_MPTC = 0x040F0, /* Multicast Packets Tx Count - R/clr */
+ E1000_BPTC = 0x040F4, /* Broadcast Packets Tx Count - R/clr */
+ E1000_TSCTC = 0x040F8, /* TCP Segmentation Context Tx - R/clr */
+ E1000_TSCTFC = 0x040FC, /* TCP Segmentation Context Tx Fail - R/clr */
+ E1000_IAC = 0x04100, /* Interrupt Assertion Count */
+ E1000_ICRXPTC = 0x04104, /* Irq Cause Rx Packet Timer Expire Count */
+ E1000_ICRXATC = 0x04108, /* Irq Cause Rx Abs Timer Expire Count */
+ E1000_ICTXPTC = 0x0410C, /* Irq Cause Tx Packet Timer Expire Count */
+ E1000_ICTXATC = 0x04110, /* Irq Cause Tx Abs Timer Expire Count */
+ E1000_ICTXQEC = 0x04118, /* Irq Cause Tx Queue Empty Count */
+ E1000_ICTXQMTC = 0x0411C, /* Irq Cause Tx Queue MinThreshold Count */
+ E1000_ICRXDMTC = 0x04120, /* Irq Cause Rx Desc MinThreshold Count */
+ E1000_ICRXOC = 0x04124, /* Irq Cause Receiver Overrun Count */
+ E1000_RXCSUM = 0x05000, /* Rx Checksum Control - RW */
+ E1000_RFCTL = 0x05008, /* Receive Filter Control */
+ E1000_MTA = 0x05200, /* Multicast Table Array - RW Array */
+ E1000_RAL_BASE = 0x05400, /* Receive Address Low - RW */
+#define E1000_RAL(_n) (E1000_RAL_BASE + ((_n) * 8))
+#define E1000_RA (E1000_RAL(0))
+ E1000_RAH_BASE = 0x05404, /* Receive Address High - RW */
+#define E1000_RAH(_n) (E1000_RAH_BASE + ((_n) * 8))
+ E1000_VFTA = 0x05600, /* VLAN Filter Table Array - RW Array */
+ E1000_WUC = 0x05800, /* Wakeup Control - RW */
+ E1000_WUFC = 0x05808, /* Wakeup Filter Control - RW */
+ E1000_WUS = 0x05810, /* Wakeup Status - RO */
+ E1000_MANC = 0x05820, /* Management Control - RW */
+ E1000_FFLT = 0x05F00, /* Flexible Filter Length Table - RW Array */
+ E1000_HOST_IF = 0x08800, /* Host Interface */
+
+ E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */
+ E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
+ E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */
+#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4))
+ E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
+ E1000_GCR = 0x05B00, /* PCI-Ex Control */
+ E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */
+ E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */
+ E1000_SWSM = 0x05B50, /* SW Semaphore */
+ E1000_FWSM = 0x05B54, /* FW Semaphore */
+ E1000_SWSM2 = 0x05B58, /* Driver-only SW semaphore */
+ E1000_FFLT_DBG = 0x05F04, /* Debug Register */
+ E1000_PCH_RAICC_BASE = 0x05F50, /* Receive Address Initial CRC */
+#define E1000_PCH_RAICC(_n) (E1000_PCH_RAICC_BASE + ((_n) * 4))
+#define E1000_CRC_OFFSET E1000_PCH_RAICC_BASE
+ E1000_HICR = 0x08F00, /* Host Interface Control */
+};
+
+#define E1000_MAX_PHY_ADDR 4
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */
+#define IGP_PAGE_SHIFT 5
+#define PHY_REG_MASK 0x1F
+
+#define BM_WUC_PAGE 800
+#define BM_WUC_ADDRESS_OPCODE 0x11
+#define BM_WUC_DATA_OPCODE 0x12
+#define BM_WUC_ENABLE_PAGE 769
+#define BM_WUC_ENABLE_REG 17
+#define BM_WUC_ENABLE_BIT (1 << 2)
+#define BM_WUC_HOST_WU_BIT (1 << 4)
+#define BM_WUC_ME_WU_BIT (1 << 5)
+
+#define BM_WUC PHY_REG(BM_WUC_PAGE, 1)
+#define BM_WUFC PHY_REG(BM_WUC_PAGE, 2)
+#define BM_WUS PHY_REG(BM_WUC_PAGE, 3)
+
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+/* manage.c */
+#define E1000_VFTA_ENTRY_SHIFT 5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+#define E1000_HICR_EN 0x01 /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define E1000_HICR_C 0x02
+#define E1000_HICR_FW_RESET_ENABLE 0x40
+#define E1000_HICR_FW_RESET 0x80
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_IAMT_MODE 0x3
+#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10
+#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0
+#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10
+#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64
+#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+/* nvm.c */
+#define E1000_STM_OPCODE 0xDB00
+
+#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000
+#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16
+#define E1000_KMRNCTRLSTA_REN 0x00200000
+#define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */
+#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */
+#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */
+#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */
+#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */
+#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */
+#define E1000_KMRNCTRLSTA_K1_CONFIG 0x7
+#define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002
+#define E1000_KMRNCTRLSTA_HD_CTRL 0x10 /* Kumeran HD Control */
+
+#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10
+#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */
+#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */
+#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */
+
+/* IFE PHY Extended Status Control */
+#define IFE_PESC_POLARITY_REVERSED 0x0100
+
+/* IFE PHY Special Control */
+#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010
+#define IFE_PSC_FORCE_POLARITY 0x0020
+
+/* IFE PHY Special Control and LED Control */
+#define IFE_PSCL_PROBE_MODE 0x0020
+#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */
+#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */
+
+/* IFE PHY MDIX Control */
+#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */
+#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */
+#define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto MDI/MDI-X, 0=disable */
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+#define E1000_DEV_ID_82571EB_COPPER 0x105E
+#define E1000_DEV_ID_82571EB_FIBER 0x105F
+#define E1000_DEV_ID_82571EB_SERDES 0x1060
+#define E1000_DEV_ID_82571EB_QUAD_COPPER 0x10A4
+#define E1000_DEV_ID_82571PT_QUAD_COPPER 0x10D5
+#define E1000_DEV_ID_82571EB_QUAD_FIBER 0x10A5
+#define E1000_DEV_ID_82571EB_QUAD_COPPER_LP 0x10BC
+#define E1000_DEV_ID_82571EB_SERDES_DUAL 0x10D9
+#define E1000_DEV_ID_82571EB_SERDES_QUAD 0x10DA
+#define E1000_DEV_ID_82572EI_COPPER 0x107D
+#define E1000_DEV_ID_82572EI_FIBER 0x107E
+#define E1000_DEV_ID_82572EI_SERDES 0x107F
+#define E1000_DEV_ID_82572EI 0x10B9
+#define E1000_DEV_ID_82573E 0x108B
+#define E1000_DEV_ID_82573E_IAMT 0x108C
+#define E1000_DEV_ID_82573L 0x109A
+#define E1000_DEV_ID_82574L 0x10D3
+#define E1000_DEV_ID_82574LA 0x10F6
+#define E1000_DEV_ID_82583V 0x150C
+
+#define E1000_DEV_ID_80003ES2LAN_COPPER_DPT 0x1096
+#define E1000_DEV_ID_80003ES2LAN_SERDES_DPT 0x1098
+#define E1000_DEV_ID_80003ES2LAN_COPPER_SPT 0x10BA
+#define E1000_DEV_ID_80003ES2LAN_SERDES_SPT 0x10BB
+
+#define E1000_DEV_ID_ICH8_82567V_3 0x1501
+#define E1000_DEV_ID_ICH8_IGP_M_AMT 0x1049
+#define E1000_DEV_ID_ICH8_IGP_AMT 0x104A
+#define E1000_DEV_ID_ICH8_IGP_C 0x104B
+#define E1000_DEV_ID_ICH8_IFE 0x104C
+#define E1000_DEV_ID_ICH8_IFE_GT 0x10C4
+#define E1000_DEV_ID_ICH8_IFE_G 0x10C5
+#define E1000_DEV_ID_ICH8_IGP_M 0x104D
+#define E1000_DEV_ID_ICH9_IGP_AMT 0x10BD
+#define E1000_DEV_ID_ICH9_BM 0x10E5
+#define E1000_DEV_ID_ICH9_IGP_M_AMT 0x10F5
+#define E1000_DEV_ID_ICH9_IGP_M 0x10BF
+#define E1000_DEV_ID_ICH9_IGP_M_V 0x10CB
+#define E1000_DEV_ID_ICH9_IGP_C 0x294C
+#define E1000_DEV_ID_ICH9_IFE 0x10C0
+#define E1000_DEV_ID_ICH9_IFE_GT 0x10C3
+#define E1000_DEV_ID_ICH9_IFE_G 0x10C2
+#define E1000_DEV_ID_ICH10_R_BM_LM 0x10CC
+#define E1000_DEV_ID_ICH10_R_BM_LF 0x10CD
+#define E1000_DEV_ID_ICH10_R_BM_V 0x10CE
+#define E1000_DEV_ID_ICH10_D_BM_LM 0x10DE
+#define E1000_DEV_ID_ICH10_D_BM_LF 0x10DF
+#define E1000_DEV_ID_ICH10_D_BM_V 0x1525
+#define E1000_DEV_ID_PCH_M_HV_LM 0x10EA
+#define E1000_DEV_ID_PCH_M_HV_LC 0x10EB
+#define E1000_DEV_ID_PCH_D_HV_DM 0x10EF
+#define E1000_DEV_ID_PCH_D_HV_DC 0x10F0
+#define E1000_DEV_ID_PCH2_LV_LM 0x1502
+#define E1000_DEV_ID_PCH2_LV_V 0x1503
+
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_1 1
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+
+enum e1000_mac_type {
+ e1000_82571,
+ e1000_82572,
+ e1000_82573,
+ e1000_82574,
+ e1000_82583,
+ e1000_80003es2lan,
+ e1000_ich8lan,
+ e1000_ich9lan,
+ e1000_ich10lan,
+ e1000_pchlan,
+ e1000_pch2lan,
+};
+
+enum e1000_media_type {
+ e1000_media_type_unknown = 0,
+ e1000_media_type_copper = 1,
+ e1000_media_type_fiber = 2,
+ e1000_media_type_internal_serdes = 3,
+ e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+ e1000_nvm_unknown = 0,
+ e1000_nvm_none,
+ e1000_nvm_eeprom_spi,
+ e1000_nvm_flash_hw,
+ e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+ e1000_nvm_override_none = 0,
+ e1000_nvm_override_spi_small,
+ e1000_nvm_override_spi_large
+};
+
+enum e1000_phy_type {
+ e1000_phy_unknown = 0,
+ e1000_phy_none,
+ e1000_phy_m88,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_bm,
+ e1000_phy_82578,
+ e1000_phy_82577,
+ e1000_phy_82579,
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity{
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full,
+ e1000_fc_default = 0xFF
+};
+
+enum e1000_ms_type {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+};
+
+enum e1000_serdes_link_state {
+ e1000_serdes_link_down = 0,
+ e1000_serdes_link_autoneg_progress,
+ e1000_serdes_link_autoneg_complete,
+ e1000_serdes_link_forced_up
+};
+
+/* Receive Descriptor */
+struct e1000_rx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ __le16 length; /* Length of data DMAed into data buffer */
+ __le16 csum; /* Packet checksum */
+ u8 status; /* Descriptor status */
+ u8 errors; /* Descriptor Errors */
+ __le16 special;
+};
+
+/* Receive Descriptor - Extended */
+union e1000_rx_desc_extended {
+ struct {
+ __le64 buffer_addr;
+ __le64 reserved;
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length;
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define MAX_PS_BUFFERS 4
+/* Receive Descriptor - Packet Split */
+union e1000_rx_desc_packet_split {
+ struct {
+ /* one buffer for protocol header(s), three data buffers */
+ __le64 buffer_addr[MAX_PS_BUFFERS];
+ } read;
+ struct {
+ struct {
+ __le32 mrq; /* Multiple Rx Queues */
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length0; /* length of buffer 0 */
+ __le16 vlan; /* VLAN tag */
+ } middle;
+ struct {
+ __le16 header_status;
+ __le16 length[3]; /* length of buffers 1-3 */
+ } upper;
+ __le64 reserved;
+ } wb; /* writeback */
+};
+
+/* Transmit Descriptor */
+struct e1000_tx_desc {
+ __le64 buffer_addr; /* Address of the descriptor's data buffer */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 cso; /* Checksum offset */
+ u8 cmd; /* Descriptor control */
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 css; /* Checksum start */
+ __le16 special;
+ } fields;
+ } upper;
+};
+
+/* Offload Context Descriptor */
+struct e1000_context_desc {
+ union {
+ __le32 ip_config;
+ struct {
+ u8 ipcss; /* IP checksum start */
+ u8 ipcso; /* IP checksum offset */
+ __le16 ipcse; /* IP checksum end */
+ } ip_fields;
+ } lower_setup;
+ union {
+ __le32 tcp_config;
+ struct {
+ u8 tucss; /* TCP checksum start */
+ u8 tucso; /* TCP checksum offset */
+ __le16 tucse; /* TCP checksum end */
+ } tcp_fields;
+ } upper_setup;
+ __le32 cmd_and_length;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 hdr_len; /* Header length */
+ __le16 mss; /* Maximum segment size */
+ } fields;
+ } tcp_seg_setup;
+};
+
+/* Offload data descriptor */
+struct e1000_data_desc {
+ __le64 buffer_addr; /* Address of the descriptor's buffer address */
+ union {
+ __le32 data;
+ struct {
+ __le16 length; /* Data buffer length */
+ u8 typ_len_ext;
+ u8 cmd;
+ } flags;
+ } lower;
+ union {
+ __le32 data;
+ struct {
+ u8 status; /* Descriptor status */
+ u8 popts; /* Packet Options */
+ __le16 special; /* */
+ } fields;
+ } upper;
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 tor;
+ u64 tot;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options;
+ u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH 252
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header;
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header;
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+/* Function pointers and static data for the MAC. */
+struct e1000_mac_operations {
+ s32 (*id_led_init)(struct e1000_hw *);
+ s32 (*blink_led)(struct e1000_hw *);
+ bool (*check_mng_mode)(struct e1000_hw *);
+ s32 (*check_for_link)(struct e1000_hw *);
+ s32 (*cleanup_led)(struct e1000_hw *);
+ void (*clear_hw_cntrs)(struct e1000_hw *);
+ void (*clear_vfta)(struct e1000_hw *);
+ s32 (*get_bus_info)(struct e1000_hw *);
+ void (*set_lan_id)(struct e1000_hw *);
+ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+ s32 (*led_on)(struct e1000_hw *);
+ s32 (*led_off)(struct e1000_hw *);
+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ s32 (*setup_link)(struct e1000_hw *);
+ s32 (*setup_physical_interface)(struct e1000_hw *);
+ s32 (*setup_led)(struct e1000_hw *);
+ void (*write_vfta)(struct e1000_hw *, u32, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+};
+
+/*
+ * When to use various PHY register access functions:
+ *
+ * Func Caller
+ * Function Does Does When to use
+ * ~~~~~~~~~~~~ ~~~~~ ~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ * X_reg L,P,A n/a for simple PHY reg accesses
+ * X_reg_locked P,A L for multiple accesses of different regs
+ * on different pages
+ * X_reg_page A L,P for multiple accesses of different regs
+ * on the same page
+ *
+ * Where X=[read|write], L=locking, P=sets page, A=register access
+ *
+ */
+struct e1000_phy_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*cfg_on_link_up)(struct e1000_hw *);
+ s32 (*check_polarity)(struct e1000_hw *);
+ s32 (*check_reset_block)(struct e1000_hw *);
+ s32 (*commit)(struct e1000_hw *);
+ s32 (*force_speed_duplex)(struct e1000_hw *);
+ s32 (*get_cfg_done)(struct e1000_hw *hw);
+ s32 (*get_cable_length)(struct e1000_hw *);
+ s32 (*get_info)(struct e1000_hw *);
+ s32 (*set_page)(struct e1000_hw *, u16);
+ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
+ s32 (*read_reg_locked)(struct e1000_hw *, u32, u16 *);
+ s32 (*read_reg_page)(struct e1000_hw *, u32, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*reset)(struct e1000_hw *);
+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
+ s32 (*write_reg)(struct e1000_hw *, u32, u16);
+ s32 (*write_reg_locked)(struct e1000_hw *, u32, u16);
+ s32 (*write_reg_page)(struct e1000_hw *, u32, u16);
+ void (*power_up)(struct e1000_hw *);
+ void (*power_down)(struct e1000_hw *);
+};
+
+/* Function pointers for the NVM. */
+struct e1000_nvm_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*update)(struct e1000_hw *);
+ s32 (*valid_led_default)(struct e1000_hw *, u16 *);
+ s32 (*validate)(struct e1000_hw *);
+ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
+};
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+ u8 addr[ETH_ALEN];
+ u8 perm_addr[ETH_ALEN];
+
+ enum e1000_mac_type type;
+
+ u32 collision_delta;
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ u32 mc_filter_type;
+ u32 tx_packet_delta;
+ u32 txcw;
+
+ u16 current_ifs_val;
+ u16 ifs_max_val;
+ u16 ifs_min_val;
+ u16 ifs_ratio;
+ u16 ifs_step_size;
+ u16 mta_reg_count;
+
+ /* Maximum size of the MTA register table in all supported adapters */
+ #define MAX_MTA_REG 128
+ u32 mta_shadow[MAX_MTA_REG];
+ u16 rar_entry_count;
+
+ u8 forced_speed_duplex;
+
+ bool adaptive_ifs;
+ bool has_fwsm;
+ bool arc_subsystem_valid;
+ bool autoneg;
+ bool autoneg_failed;
+ bool get_link_status;
+ bool in_ifs_mode;
+ bool serdes_has_link;
+ bool tx_pkt_filtering;
+ enum e1000_serdes_link_state serdes_link_state;
+};
+
+struct e1000_phy_info {
+ struct e1000_phy_operations ops;
+
+ enum e1000_phy_type type;
+
+ enum e1000_1000t_rx_status local_rx;
+ enum e1000_1000t_rx_status remote_rx;
+ enum e1000_ms_type ms_type;
+ enum e1000_ms_type original_ms_type;
+ enum e1000_rev_polarity cable_polarity;
+ enum e1000_smart_speed smart_speed;
+
+ u32 addr;
+ u32 id;
+ u32 reset_delay_us; /* in usec */
+ u32 revision;
+
+ enum e1000_media_type media_type;
+
+ u16 autoneg_advertised;
+ u16 autoneg_mask;
+ u16 cable_length;
+ u16 max_cable_length;
+ u16 min_cable_length;
+
+ u8 mdix;
+
+ bool disable_polarity_correction;
+ bool is_mdix;
+ bool polarity_correction;
+ bool speed_downgraded;
+ bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+ struct e1000_nvm_operations ops;
+
+ enum e1000_nvm_type type;
+ enum e1000_nvm_override override;
+
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+
+ u16 word_size;
+ u16 delay_usec;
+ u16 address_bits;
+ u16 opcode_bits;
+ u16 page_size;
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_width width;
+
+ u16 func;
+};
+
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ u16 refresh_time; /* Flow control refresh timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_mode current_mode; /* FC mode in effect */
+ enum e1000_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+struct e1000_dev_spec_82571 {
+ bool laa_is_present;
+ u32 smb_counter;
+};
+
+struct e1000_dev_spec_80003es2lan {
+ bool mdic_wa_enable;
+};
+
+struct e1000_shadow_ram {
+ u16 value;
+ bool modified;
+};
+
+#define E1000_ICH8_SHADOW_RAM_WORDS 2048
+
+struct e1000_dev_spec_ich8lan {
+ bool kmrn_lock_loss_workaround_enabled;
+ struct e1000_shadow_ram shadow_ram[E1000_ICH8_SHADOW_RAM_WORDS];
+ bool nvm_k1_enabled;
+ bool eee_disable;
+};
+
+struct e1000_hw {
+ struct e1000_adapter *adapter;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+ union {
+ struct e1000_dev_spec_82571 e82571;
+ struct e1000_dev_spec_80003es2lan e80003es2lan;
+ struct e1000_dev_spec_ich8lan ich8lan;
+ } dev_spec;
+};
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/*
+ * 82562G 10/100 Network Connection
+ * 82562G-2 10/100 Network Connection
+ * 82562GT 10/100 Network Connection
+ * 82562GT-2 10/100 Network Connection
+ * 82562V 10/100 Network Connection
+ * 82562V-2 10/100 Network Connection
+ * 82566DC-2 Gigabit Network Connection
+ * 82566DC Gigabit Network Connection
+ * 82566DM-2 Gigabit Network Connection
+ * 82566DM Gigabit Network Connection
+ * 82566MC Gigabit Network Connection
+ * 82566MM Gigabit Network Connection
+ * 82567LM Gigabit Network Connection
+ * 82567LF Gigabit Network Connection
+ * 82567V Gigabit Network Connection
+ * 82567LM-2 Gigabit Network Connection
+ * 82567LF-2 Gigabit Network Connection
+ * 82567V-2 Gigabit Network Connection
+ * 82567LF-3 Gigabit Network Connection
+ * 82567LM-3 Gigabit Network Connection
+ * 82567LM-4 Gigabit Network Connection
+ * 82577LM Gigabit Network Connection
+ * 82577LC Gigabit Network Connection
+ * 82578DM Gigabit Network Connection
+ * 82578DC Gigabit Network Connection
+ * 82579LM Gigabit Network Connection
+ * 82579V Gigabit Network Connection
+ */
+
+#include "e1000.h"
+
+#define ICH_FLASH_GFPREG 0x0000
+#define ICH_FLASH_HSFSTS 0x0004
+#define ICH_FLASH_HSFCTL 0x0006
+#define ICH_FLASH_FADDR 0x0008
+#define ICH_FLASH_FDATA0 0x0010
+#define ICH_FLASH_PR0 0x0074
+
+#define ICH_FLASH_READ_COMMAND_TIMEOUT 500
+#define ICH_FLASH_WRITE_COMMAND_TIMEOUT 500
+#define ICH_FLASH_ERASE_COMMAND_TIMEOUT 3000000
+#define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
+#define ICH_FLASH_CYCLE_REPEAT_COUNT 10
+
+#define ICH_CYCLE_READ 0
+#define ICH_CYCLE_WRITE 2
+#define ICH_CYCLE_ERASE 3
+
+#define FLASH_GFPREG_BASE_MASK 0x1FFF
+#define FLASH_SECTOR_ADDR_SHIFT 12
+
+#define ICH_FLASH_SEG_SIZE_256 256
+#define ICH_FLASH_SEG_SIZE_4K 4096
+#define ICH_FLASH_SEG_SIZE_8K 8192
+#define ICH_FLASH_SEG_SIZE_64K 65536
+
+
+#define E1000_ICH_FWSM_RSPCIPHY 0x00000040 /* Reset PHY on PCI Reset */
+/* FW established a valid mode */
+#define E1000_ICH_FWSM_FW_VALID 0x00008000
+
+#define E1000_ICH_MNG_IAMT_MODE 0x2
+
+#define ID_LED_DEFAULT_ICH8LAN ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_OFF2 << 8) | \
+ (ID_LED_DEF1_ON2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+
+#define E1000_ICH_NVM_SIG_WORD 0x13
+#define E1000_ICH_NVM_SIG_MASK 0xC000
+#define E1000_ICH_NVM_VALID_SIG_MASK 0xC0
+#define E1000_ICH_NVM_SIG_VALUE 0x80
+
+#define E1000_ICH8_LAN_INIT_TIMEOUT 1500
+
+#define E1000_FEXTNVM_SW_CONFIG 1
+#define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */
+
+#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7
+#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3
+
+#define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL
+
+#define E1000_ICH_RAR_ENTRIES 7
+
+#define PHY_PAGE_SHIFT 5
+#define PHY_REG(page, reg) (((page) << PHY_PAGE_SHIFT) | \
+ ((reg) & MAX_PHY_REG_ADDRESS))
+#define IGP3_KMRN_DIAG PHY_REG(770, 19) /* KMRN Diagnostic */
+#define IGP3_VR_CTRL PHY_REG(776, 18) /* Voltage Regulator Control */
+
+#define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002
+#define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK 0x0300
+#define IGP3_VR_CTRL_MODE_SHUTDOWN 0x0200
+
+#define HV_LED_CONFIG PHY_REG(768, 30) /* LED Configuration */
+
+#define SW_FLAG_TIMEOUT 1000 /* SW Semaphore flag timeout in milliseconds */
+
+/* SMBus Address Phy Register */
+#define HV_SMB_ADDR PHY_REG(768, 26)
+#define HV_SMB_ADDR_MASK 0x007F
+#define HV_SMB_ADDR_PEC_EN 0x0200
+#define HV_SMB_ADDR_VALID 0x0080
+
+/* PHY Power Management Control */
+#define HV_PM_CTRL PHY_REG(770, 17)
+
+/* PHY Low Power Idle Control */
+#define I82579_LPI_CTRL PHY_REG(772, 20)
+#define I82579_LPI_CTRL_ENABLE_MASK 0x6000
+
+/* EMI Registers */
+#define I82579_EMI_ADDR 0x10
+#define I82579_EMI_DATA 0x11
+#define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
+
+/* Strapping Option Register - RO */
+#define E1000_STRAP 0x0000C
+#define E1000_STRAP_SMBUS_ADDRESS_MASK 0x00FE0000
+#define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
+
+/* OEM Bits Phy Register */
+#define HV_OEM_BITS PHY_REG(768, 25)
+#define HV_OEM_BITS_LPLU 0x0004 /* Low Power Link Up */
+#define HV_OEM_BITS_GBE_DIS 0x0040 /* Gigabit Disable */
+#define HV_OEM_BITS_RESTART_AN 0x0400 /* Restart Auto-negotiation */
+
+#define E1000_NVM_K1_CONFIG 0x1B /* NVM K1 Config Word */
+#define E1000_NVM_K1_ENABLE 0x1 /* NVM Enable K1 bit */
+
+/* KMRN Mode Control */
+#define HV_KMRN_MODE_CTRL PHY_REG(769, 16)
+#define HV_KMRN_MDIO_SLOW 0x0400
+
+/* ICH GbE Flash Hardware Sequencing Flash Status Register bit breakdown */
+/* Offset 04h HSFSTS */
+union ich8_hws_flash_status {
+ struct ich8_hsfsts {
+ u16 flcdone :1; /* bit 0 Flash Cycle Done */
+ u16 flcerr :1; /* bit 1 Flash Cycle Error */
+ u16 dael :1; /* bit 2 Direct Access error Log */
+ u16 berasesz :2; /* bit 4:3 Sector Erase Size */
+ u16 flcinprog :1; /* bit 5 flash cycle in Progress */
+ u16 reserved1 :2; /* bit 13:6 Reserved */
+ u16 reserved2 :6; /* bit 13:6 Reserved */
+ u16 fldesvalid :1; /* bit 14 Flash Descriptor Valid */
+ u16 flockdn :1; /* bit 15 Flash Config Lock-Down */
+ } hsf_status;
+ u16 regval;
+};
+
+/* ICH GbE Flash Hardware Sequencing Flash control Register bit breakdown */
+/* Offset 06h FLCTL */
+union ich8_hws_flash_ctrl {
+ struct ich8_hsflctl {
+ u16 flcgo :1; /* 0 Flash Cycle Go */
+ u16 flcycle :2; /* 2:1 Flash Cycle */
+ u16 reserved :5; /* 7:3 Reserved */
+ u16 fldbcount :2; /* 9:8 Flash Data Byte Count */
+ u16 flockdn :6; /* 15:10 Reserved */
+ } hsf_ctrl;
+ u16 regval;
+};
+
+/* ICH Flash Region Access Permissions */
+union ich8_hws_flash_regacc {
+ struct ich8_flracc {
+ u32 grra :8; /* 0:7 GbE region Read Access */
+ u32 grwa :8; /* 8:15 GbE region Write Access */
+ u32 gmrag :8; /* 23:16 GbE Master Read Access Grant */
+ u32 gmwag :8; /* 31:24 GbE Master Write Access Grant */
+ } hsf_flregacc;
+ u16 regval;
+};
+
+/* ICH Flash Protected Region */
+union ich8_flash_protected_range {
+ struct ich8_pr {
+ u32 base:13; /* 0:12 Protected Range Base */
+ u32 reserved1:2; /* 13:14 Reserved */
+ u32 rpe:1; /* 15 Read Protection Enable */
+ u32 limit:13; /* 16:28 Protected Range Limit */
+ u32 reserved2:2; /* 29:30 Reserved */
+ u32 wpe:1; /* 31 Write Protection Enable */
+ } range;
+ u32 regval;
+};
+
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw);
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank);
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+ u32 offset, u8 byte);
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 *data);
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+ u16 *data);
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 size, u16 *data);
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw);
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw);
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw);
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw);
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw);
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw);
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw);
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active);
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw);
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw);
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link);
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw);
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw);
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate);
+
+static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg)
+{
+ return readw(hw->flash_address + reg);
+}
+
+static inline u32 __er32flash(struct e1000_hw *hw, unsigned long reg)
+{
+ return readl(hw->flash_address + reg);
+}
+
+static inline void __ew16flash(struct e1000_hw *hw, unsigned long reg, u16 val)
+{
+ writew(val, hw->flash_address + reg);
+}
+
+static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
+{
+ writel(val, hw->flash_address + reg);
+}
+
+#define er16flash(reg) __er16flash(hw, (reg))
+#define er32flash(reg) __er32flash(hw, (reg))
+#define ew16flash(reg,val) __ew16flash(hw, (reg), (val))
+#define ew32flash(reg,val) __ew32flash(hw, (reg), (val))
+
+static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ ctrl &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, ctrl);
+ e1e_flush();
+ udelay(10);
+ ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, ctrl);
+}
+
+/**
+ * e1000_init_phy_params_pchlan - Initialize PHY function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 fwsm;
+ s32 ret_val = 0;
+
+ phy->addr = 1;
+ phy->reset_delay_us = 100;
+
+ phy->ops.set_page = e1000_set_page_igp;
+ phy->ops.read_reg = e1000_read_phy_reg_hv;
+ phy->ops.read_reg_locked = e1000_read_phy_reg_hv_locked;
+ phy->ops.read_reg_page = e1000_read_phy_reg_page_hv;
+ phy->ops.set_d0_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.set_d3_lplu_state = e1000_set_lplu_state_pchlan;
+ phy->ops.write_reg = e1000_write_phy_reg_hv;
+ phy->ops.write_reg_locked = e1000_write_phy_reg_hv_locked;
+ phy->ops.write_reg_page = e1000_write_phy_reg_page_hv;
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+
+ /*
+ * The MAC-PHY interconnect may still be in SMBus mode
+ * after Sx->S0. If the manageability engine (ME) is
+ * disabled, then toggle the LANPHYPC Value bit to force
+ * the interconnect to PCIe mode.
+ */
+ fwsm = er32(FWSM);
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID) && !e1000_check_reset_block(hw)) {
+ e1000_toggle_lanphypc_value_ich8lan(hw);
+ msleep(50);
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+ }
+
+ /*
+ * Reset the PHY before any access to it. Doing so, ensures that
+ * the PHY is in a known good state before we read/write PHY registers.
+ * The generic reset is sufficient here, because we haven't determined
+ * the PHY type yet.
+ */
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+ if (ret_val)
+ goto out;
+
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ usleep_range(10000, 20000);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
+ phy->id = e1000_phy_unknown;
+ switch (hw->mac.type) {
+ default:
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+ break;
+ /* fall-through */
+ case e1000_pch2lan:
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ goto out;
+ break;
+ }
+ phy->type = e1000e_get_phy_type_from_id(phy->id);
+
+ switch (phy->type) {
+ case e1000_phy_82577:
+ case e1000_phy_82579:
+ phy->ops.check_polarity = e1000_check_polarity_82577;
+ phy->ops.force_speed_duplex =
+ e1000_phy_force_speed_duplex_82577;
+ phy->ops.get_cable_length = e1000_get_cable_length_82577;
+ phy->ops.get_info = e1000_get_phy_info_82577;
+ phy->ops.commit = e1000e_phy_sw_reset;
+ break;
+ case e1000_phy_82578:
+ phy->ops.check_polarity = e1000_check_polarity_m88;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+ phy->ops.get_cable_length = e1000e_get_cable_length_m88;
+ phy->ops.get_info = e1000e_get_phy_info_m88;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_init_phy_params_ich8lan - Initialize PHY function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific PHY parameters and function pointers.
+ **/
+static s32 e1000_init_phy_params_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 i = 0;
+
+ phy->addr = 1;
+ phy->reset_delay_us = 100;
+
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
+
+ /*
+ * We may need to do this twice - once for IGP and if that fails,
+ * we'll set BM func pointers and try again
+ */
+ ret_val = e1000e_determine_phy_address(hw);
+ if (ret_val) {
+ phy->ops.write_reg = e1000e_write_phy_reg_bm;
+ phy->ops.read_reg = e1000e_read_phy_reg_bm;
+ ret_val = e1000e_determine_phy_address(hw);
+ if (ret_val) {
+ e_dbg("Cannot determine PHY addr. Erroring out\n");
+ return ret_val;
+ }
+ }
+
+ phy->id = 0;
+ while ((e1000_phy_unknown == e1000e_get_phy_type_from_id(phy->id)) &&
+ (i++ < 100)) {
+ usleep_range(1000, 2000);
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Verify phy id */
+ switch (phy->id) {
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->ops.read_reg_locked = e1000e_read_phy_reg_igp_locked;
+ phy->ops.write_reg_locked = e1000e_write_phy_reg_igp_locked;
+ phy->ops.get_info = e1000e_get_phy_info_igp;
+ phy->ops.check_polarity = e1000_check_polarity_igp;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_igp;
+ break;
+ case IFE_E_PHY_ID:
+ case IFE_PLUS_E_PHY_ID:
+ case IFE_C_E_PHY_ID:
+ phy->type = e1000_phy_ife;
+ phy->autoneg_mask = E1000_ALL_NOT_GIG;
+ phy->ops.get_info = e1000_get_phy_info_ife;
+ phy->ops.check_polarity = e1000_check_polarity_ife;
+ phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_ife;
+ break;
+ case BME1000_E_PHY_ID:
+ phy->type = e1000_phy_bm;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->ops.read_reg = e1000e_read_phy_reg_bm;
+ phy->ops.write_reg = e1000e_write_phy_reg_bm;
+ phy->ops.commit = e1000e_phy_sw_reset;
+ phy->ops.get_info = e1000e_get_phy_info_m88;
+ phy->ops.check_polarity = e1000_check_polarity_m88;
+ phy->ops.force_speed_duplex = e1000e_phy_force_speed_duplex_m88;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_init_nvm_params_ich8lan - Initialize NVM function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific NVM parameters and function
+ * pointers.
+ **/
+static s32 e1000_init_nvm_params_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u32 gfpreg, sector_base_addr, sector_end_addr;
+ u16 i;
+
+ /* Can't read flash registers if the register set isn't mapped. */
+ if (!hw->flash_address) {
+ e_dbg("ERROR: Flash registers not mapped\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ nvm->type = e1000_nvm_flash_sw;
+
+ gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+ /*
+ * sector_X_addr is a "sector"-aligned address (4096 bytes)
+ * Add 1 to sector_end_addr since this sector is included in
+ * the overall size.
+ */
+ sector_base_addr = gfpreg & FLASH_GFPREG_BASE_MASK;
+ sector_end_addr = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK) + 1;
+
+ /* flash_base_addr is byte-aligned */
+ nvm->flash_base_addr = sector_base_addr << FLASH_SECTOR_ADDR_SHIFT;
+
+ /*
+ * find total size of the NVM, then cut in half since the total
+ * size represents two separate NVM banks.
+ */
+ nvm->flash_bank_size = (sector_end_addr - sector_base_addr)
+ << FLASH_SECTOR_ADDR_SHIFT;
+ nvm->flash_bank_size /= 2;
+ /* Adjust to word count */
+ nvm->flash_bank_size /= sizeof(u16);
+
+ nvm->word_size = E1000_ICH8_SHADOW_RAM_WORDS;
+
+ /* Clear shadow ram */
+ for (i = 0; i < nvm->word_size; i++) {
+ dev_spec->shadow_ram[i].modified = false;
+ dev_spec->shadow_ram[i].value = 0xFFFF;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_init_mac_params_ich8lan - Initialize MAC function pointers
+ * @hw: pointer to the HW structure
+ *
+ * Initialize family-specific MAC parameters and function
+ * pointers.
+ **/
+static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+
+ /* Set media type function pointer */
+ hw->phy.media_type = e1000_media_type_copper;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 32;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_ICH_RAR_ENTRIES;
+ if (mac->type == e1000_ich8lan)
+ mac->rar_entry_count--;
+ /* FWSM register */
+ mac->has_fwsm = true;
+ /* ARC subsystem not supported */
+ mac->arc_subsystem_valid = false;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
+
+ /* LED operations */
+ switch (mac->type) {
+ case e1000_ich8lan:
+ case e1000_ich9lan:
+ case e1000_ich10lan:
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000_check_mng_mode_ich8lan;
+ /* ID LED init */
+ mac->ops.id_led_init = e1000e_id_led_init;
+ /* blink LED */
+ mac->ops.blink_led = e1000e_blink_led_generic;
+ /* setup LED */
+ mac->ops.setup_led = e1000e_setup_led_generic;
+ /* cleanup LED */
+ mac->ops.cleanup_led = e1000_cleanup_led_ich8lan;
+ /* turn on/off LED */
+ mac->ops.led_on = e1000_led_on_ich8lan;
+ mac->ops.led_off = e1000_led_off_ich8lan;
+ break;
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ /* check management mode */
+ mac->ops.check_mng_mode = e1000_check_mng_mode_pchlan;
+ /* ID LED init */
+ mac->ops.id_led_init = e1000_id_led_init_pchlan;
+ /* setup LED */
+ mac->ops.setup_led = e1000_setup_led_pchlan;
+ /* cleanup LED */
+ mac->ops.cleanup_led = e1000_cleanup_led_pchlan;
+ /* turn on/off LED */
+ mac->ops.led_on = e1000_led_on_pchlan;
+ mac->ops.led_off = e1000_led_off_pchlan;
+ break;
+ default:
+ break;
+ }
+
+ /* Enable PCS Lock-loss workaround for ICH8 */
+ if (mac->type == e1000_ich8lan)
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true);
+
+ /* Gate automatic PHY configuration by hardware on managed 82579 */
+ if ((mac->type == e1000_pch2lan) &&
+ (er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+ return 0;
+}
+
+/**
+ * e1000_set_eee_pchlan - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ *
+ * Enable/disable EEE based on setting in dev_spec structure. The bits in
+ * the LPI Control register will remain set only if/when link is up.
+ **/
+static s32 e1000_set_eee_pchlan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_reg;
+
+ if (hw->phy.type != e1000_phy_82579)
+ goto out;
+
+ ret_val = e1e_rphy(hw, I82579_LPI_CTRL, &phy_reg);
+ if (ret_val)
+ goto out;
+
+ if (hw->dev_spec.ich8lan.eee_disable)
+ phy_reg &= ~I82579_LPI_CTRL_ENABLE_MASK;
+ else
+ phy_reg |= I82579_LPI_CTRL_ENABLE_MASK;
+
+ ret_val = e1e_wphy(hw, I82579_LPI_CTRL, phy_reg);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_copper_link_ich8lan - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (hw->mac.type == e1000_pchlan) {
+ ret_val = e1000_k1_gig_workaround_hv(hw, link);
+ if (ret_val)
+ goto out;
+ }
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = e1000_link_stall_workaround_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ if (hw->mac.type == e1000_pch2lan) {
+ ret_val = e1000_k1_workaround_lv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ e1000e_check_downshift(hw);
+
+ /* Enable/Disable EEE after link up */
+ ret_val = e1000_set_eee_pchlan(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val)
+ e_dbg("Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+static s32 e1000_get_variants_ich8lan(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ s32 rc;
+
+ rc = e1000_init_mac_params_ich8lan(adapter);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_nvm_params_ich8lan(hw);
+ if (rc)
+ return rc;
+
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ case e1000_ich9lan:
+ case e1000_ich10lan:
+ rc = e1000_init_phy_params_ich8lan(hw);
+ break;
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ rc = e1000_init_phy_params_pchlan(hw);
+ break;
+ default:
+ break;
+ }
+ if (rc)
+ return rc;
+
+ /*
+ * Disable Jumbo Frame support on parts with Intel 10/100 PHY or
+ * on parts with MACsec enabled in NVM (reflected in CTRL_EXT).
+ */
+ if ((adapter->hw.phy.type == e1000_phy_ife) ||
+ ((adapter->hw.mac.type >= e1000_pch2lan) &&
+ (!(er32(CTRL_EXT) & E1000_CTRL_EXT_LSECCK)))) {
+ adapter->flags &= ~FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN;
+
+ hw->mac.ops.blink_led = NULL;
+ }
+
+ if ((adapter->hw.mac.type == e1000_ich8lan) &&
+ (adapter->hw.phy.type == e1000_phy_igp_3))
+ adapter->flags |= FLAG_LSC_GIG_SPEED_DROP;
+
+ /* Disable EEE by default until IEEE802.3az spec is finalized */
+ if (adapter->flags2 & FLAG2_HAS_EEE)
+ adapter->hw.dev_spec.ich8lan.eee_disable = true;
+
+ return 0;
+}
+
+static DEFINE_MUTEX(nvm_mutex);
+
+/**
+ * e1000_acquire_nvm_ich8lan - Acquire NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Acquires the mutex for performing NVM operations.
+ **/
+static s32 e1000_acquire_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_lock(&nvm_mutex);
+
+ return 0;
+}
+
+/**
+ * e1000_release_nvm_ich8lan - Release NVM mutex
+ * @hw: pointer to the HW structure
+ *
+ * Releases the mutex used while performing NVM operations.
+ **/
+static void e1000_release_nvm_ich8lan(struct e1000_hw *hw)
+{
+ mutex_unlock(&nvm_mutex);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ * e1000_acquire_swflag_ich8lan - Acquire software control flag
+ * @hw: pointer to the HW structure
+ *
+ * Acquires the software control flag for performing PHY and select
+ * MAC CSR accesses.
+ **/
+static s32 e1000_acquire_swflag_ich8lan(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl, timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = 0;
+
+ mutex_lock(&swflag_mutex);
+
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (!(extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG))
+ break;
+
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ e_dbg("SW/FW/HW has locked the resource for too long.\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ timeout = SW_FLAG_TIMEOUT;
+
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+
+ while (timeout) {
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG)
+ break;
+
+ mdelay(1);
+ timeout--;
+ }
+
+ if (!timeout) {
+ e_dbg("Failed to acquire the semaphore.\n");
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+out:
+ if (ret_val)
+ mutex_unlock(&swflag_mutex);
+
+ return ret_val;
+}
+
+/**
+ * e1000_release_swflag_ich8lan - Release software control flag
+ * @hw: pointer to the HW structure
+ *
+ * Releases the software control flag for performing PHY and select
+ * MAC CSR accesses.
+ **/
+static void e1000_release_swflag_ich8lan(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_SWFLAG) {
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_SWFLAG;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ } else {
+ e_dbg("Semaphore unexpectedly released by sw/fw/hw\n");
+ }
+
+ mutex_unlock(&swflag_mutex);
+}
+
+/**
+ * e1000_check_mng_mode_ich8lan - Checks management mode
+ * @hw: pointer to the HW structure
+ *
+ * This checks if the adapter has any manageability enabled.
+ * This is a function pointer entry point only called by read/write
+ * routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ fwsm = er32(FWSM);
+ return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ * e1000_check_mng_mode_pchlan - Checks management mode
+ * @hw: pointer to the HW structure
+ *
+ * This checks if the adapter has iAMT enabled.
+ * This is a function pointer entry point only called by read/write
+ * routines for the PHY and NVM parts.
+ **/
+static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ fwsm = er32(FWSM);
+ return (fwsm & E1000_ICH_FWSM_FW_VALID) &&
+ (fwsm & (E1000_ICH_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT));
+}
+
+/**
+ * e1000_check_reset_block_ich8lan - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Checks if firmware is blocking the reset of the PHY.
+ * This is a function pointer entry point only called by
+ * reset routines.
+ **/
+static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ fwsm = er32(FWSM);
+
+ return (fwsm & E1000_ICH_FWSM_RSPCIPHY) ? 0 : E1000_BLK_PHY_RESET;
+}
+
+/**
+ * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states
+ * @hw: pointer to the HW structure
+ *
+ * Assumes semaphore already acquired.
+ *
+ **/
+static s32 e1000_write_smbus_addr(struct e1000_hw *hw)
+{
+ u16 phy_data;
+ u32 strap = er32(STRAP);
+ s32 ret_val = 0;
+
+ strap &= E1000_STRAP_SMBUS_ADDRESS_MASK;
+
+ ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~HV_SMB_ADDR_MASK;
+ phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT);
+ phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID;
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ *
+ * SW should configure the LCD from the NVM extended configuration region
+ * as a workaround for certain parts.
+ **/
+static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask;
+ s32 ret_val = 0;
+ u16 word_addr, reg_data, reg_addr, phy_page = 0;
+
+ /*
+ * Initialize the PHY from the NVM on ICH platforms. This
+ * is needed due to an issue where the NVM configuration is
+ * not properly autoloaded after power transitions.
+ * Therefore, after each PHY reset, we will load the
+ * configuration data out of the NVM manually.
+ */
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ if (phy->type != e1000_phy_igp_3)
+ return ret_val;
+
+ if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) {
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG;
+ break;
+ }
+ /* Fall-thru */
+ case e1000_pchlan:
+ case e1000_pch2lan:
+ sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG_ICH8M;
+ break;
+ default:
+ return ret_val;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ data = er32(FEXTNVM);
+ if (!(data & sw_cfg_mask))
+ goto out;
+
+ /*
+ * Make sure HW does not configure LCD from PHY
+ * extended configuration before SW configuration
+ */
+ data = er32(EXTCNF_CTRL);
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ if (data & E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE)
+ goto out;
+ }
+
+ cnf_size = er32(EXTCNF_SIZE);
+ cnf_size &= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK;
+ cnf_size >>= E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT;
+ if (!cnf_size)
+ goto out;
+
+ cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK;
+ cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT;
+
+ if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) &&
+ (hw->mac.type == e1000_pchlan)) ||
+ (hw->mac.type == e1000_pch2lan)) {
+ /*
+ * HW configures the SMBus address and LEDs when the
+ * OEM and LCD Write Enable bits are set in the NVM.
+ * When both NVM bits are cleared, SW will configure
+ * them instead.
+ */
+ ret_val = e1000_write_smbus_addr(hw);
+ if (ret_val)
+ goto out;
+
+ data = er32(LEDCTL);
+ ret_val = e1000_write_phy_reg_hv_locked(hw, HV_LED_CONFIG,
+ (u16)data);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Configure LCD from extended configuration region. */
+
+ /* cnf_base_addr is in DWORD */
+ word_addr = (u16)(cnf_base_addr << 1);
+
+ for (i = 0; i < cnf_size; i++) {
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2), 1,
+ ®_data);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_read_nvm(hw, (word_addr + i * 2 + 1),
+ 1, ®_addr);
+ if (ret_val)
+ goto out;
+
+ /* Save off the PHY page for future writes. */
+ if (reg_addr == IGP01E1000_PHY_PAGE_SELECT) {
+ phy_page = reg_data;
+ continue;
+ }
+
+ reg_addr &= PHY_REG_MASK;
+ reg_addr |= phy_page;
+
+ ret_val = phy->ops.write_reg_locked(hw, (u32)reg_addr,
+ reg_data);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * e1000_k1_gig_workaround_hv - K1 Si workaround
+ * @hw: pointer to the HW structure
+ * @link: link up bool flag
+ *
+ * If K1 is enabled for 1Gbps, the MAC might stall when transitioning
+ * from a lower speed. This workaround disables K1 whenever link is at 1Gig
+ * If link is down, the function will restore the default K1 setting located
+ * in the NVM.
+ **/
+static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link)
+{
+ s32 ret_val = 0;
+ u16 status_reg = 0;
+ bool k1_enable = hw->dev_spec.ich8lan.nvm_k1_enabled;
+
+ if (hw->mac.type != e1000_pchlan)
+ goto out;
+
+ /* Wrap the whole flow with the sw flag */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ /* Disable K1 when link is 1Gbps, otherwise use the NVM setting */
+ if (link) {
+ if (hw->phy.type == e1000_phy_82578) {
+ ret_val = hw->phy.ops.read_reg_locked(hw, BM_CS_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
+
+ if (status_reg == (BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = hw->phy.ops.read_reg_locked(hw, HV_M_STATUS,
+ &status_reg);
+ if (ret_val)
+ goto release;
+
+ status_reg &= HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_MASK;
+
+ if (status_reg == (HV_M_STATUS_LINK_UP |
+ HV_M_STATUS_AUTONEG_COMPLETE |
+ HV_M_STATUS_SPEED_1000))
+ k1_enable = false;
+ }
+
+ /* Link stall fix for link up */
+ ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
+ 0x0100);
+ if (ret_val)
+ goto release;
+
+ } else {
+ /* Link stall fix for link down */
+ ret_val = hw->phy.ops.write_reg_locked(hw, PHY_REG(770, 19),
+ 0x4100);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000_configure_k1_ich8lan(hw, k1_enable);
+
+release:
+ hw->phy.ops.release(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_configure_k1_ich8lan - Configure K1 power state
+ * @hw: pointer to the HW structure
+ * @enable: K1 state to configure
+ *
+ * Configure the K1 power state based on the provided parameter.
+ * Assumes semaphore already acquired.
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ **/
+s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
+{
+ s32 ret_val = 0;
+ u32 ctrl_reg = 0;
+ u32 ctrl_ext = 0;
+ u32 reg = 0;
+ u16 kmrn_reg = 0;
+
+ ret_val = e1000e_read_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ &kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ if (k1_enable)
+ kmrn_reg |= E1000_KMRNCTRLSTA_K1_ENABLE;
+ else
+ kmrn_reg &= ~E1000_KMRNCTRLSTA_K1_ENABLE;
+
+ ret_val = e1000e_write_kmrn_reg_locked(hw,
+ E1000_KMRNCTRLSTA_K1_CONFIG,
+ kmrn_reg);
+ if (ret_val)
+ goto out;
+
+ udelay(20);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_reg = er32(CTRL);
+
+ reg = ctrl_reg & ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ reg |= E1000_CTRL_FRCSPD;
+ ew32(CTRL, reg);
+
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
+ e1e_flush();
+ udelay(20);
+ ew32(CTRL, ctrl_reg);
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+ udelay(20);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_oem_bits_config_ich8lan - SW-based LCD Configuration
+ * @hw: pointer to the HW structure
+ * @d0_state: boolean if entering d0 or d3 device state
+ *
+ * SW will configure Gbe Disable and LPLU based on the NVM. The four bits are
+ * collectively called OEM bits. The OEM Write Enable bit and SW Config bit
+ * in NVM determines whether HW should configure LPLU and Gbe Disable.
+ **/
+static s32 e1000_oem_bits_config_ich8lan(struct e1000_hw *hw, bool d0_state)
+{
+ s32 ret_val = 0;
+ u32 mac_reg;
+ u16 oem_reg;
+
+ if ((hw->mac.type != e1000_pch2lan) && (hw->mac.type != e1000_pchlan))
+ return ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (!(hw->mac.type == e1000_pch2lan)) {
+ mac_reg = er32(EXTCNF_CTRL);
+ if (mac_reg & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE)
+ goto out;
+ }
+
+ mac_reg = er32(FEXTNVM);
+ if (!(mac_reg & E1000_FEXTNVM_SW_CONFIG_ICH8M))
+ goto out;
+
+ mac_reg = er32(PHY_CTRL);
+
+ ret_val = hw->phy.ops.read_reg_locked(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ oem_reg &= ~(HV_OEM_BITS_GBE_DIS | HV_OEM_BITS_LPLU);
+
+ if (d0_state) {
+ if (mac_reg & E1000_PHY_CTRL_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_D0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ } else {
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_GBE_DISABLE)
+ oem_reg |= HV_OEM_BITS_GBE_DIS;
+
+ if (mac_reg & E1000_PHY_CTRL_NOND0A_LPLU)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ }
+ /* Restart auto-neg to activate the bits */
+ if (!e1000_check_reset_block(hw))
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = hw->phy.ops.write_reg_locked(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ hw->phy.ops.release(hw);
+
+ return ret_val;
+}
+
+
+/**
+ * e1000_set_mdio_slow_mode_hv - Set slow MDIO access mode
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, HV_KMRN_MODE_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= HV_KMRN_MDIO_SLOW;
+
+ ret_val = e1e_wphy(hw, HV_KMRN_MODE_CTRL, data);
+
+ return ret_val;
+}
+
+/**
+ * e1000_hv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ * done after every PHY reset.
+ **/
+static s32 e1000_hv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_data;
+
+ if (hw->mac.type != e1000_pchlan)
+ return ret_val;
+
+ /* Set MDIO slow mode before any other MDIO access */
+ if (hw->phy.type == e1000_phy_82577) {
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ if (((hw->phy.type == e1000_phy_82577) &&
+ ((hw->phy.revision == 1) || (hw->phy.revision == 2))) ||
+ ((hw->phy.type == e1000_phy_82578) && (hw->phy.revision == 1))) {
+ /* Disable generation of early preamble */
+ ret_val = e1e_wphy(hw, PHY_REG(769, 25), 0x4431);
+ if (ret_val)
+ return ret_val;
+
+ /* Preamble tuning for SSC */
+ ret_val = e1e_wphy(hw, PHY_REG(770, 16), 0xA204);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->phy.type == e1000_phy_82578) {
+ /*
+ * Return registers to default by doing a soft reset then
+ * writing 0x3140 to the control register.
+ */
+ if (hw->phy.revision < 2) {
+ e1000e_phy_sw_reset(hw);
+ ret_val = e1e_wphy(hw, PHY_CONTROL, 0x3140);
+ }
+ }
+
+ /* Select page 0 */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ hw->phy.addr = 1;
+ ret_val = e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, 0);
+ hw->phy.ops.release(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Configure the K1 Si workaround during phy reset assuming there is
+ * link so that it disables K1 if link is in 1Gbps.
+ */
+ ret_val = e1000_k1_gig_workaround_hv(hw, true);
+ if (ret_val)
+ goto out;
+
+ /* Workaround for link disconnects on a busy hub in half duplex */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg_locked(hw, BM_PORT_GEN_CFG, &phy_data);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw, BM_PORT_GEN_CFG,
+ phy_data & 0x00FF);
+release:
+ hw->phy.ops.release(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_copy_rx_addrs_to_phy_ich8lan - Copy Rx addresses from MAC to PHY
+ * @hw: pointer to the HW structure
+ **/
+void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw)
+{
+ u32 mac_reg;
+ u16 i, phy_reg = 0;
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return;
+ ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+ if (ret_val)
+ goto release;
+
+ /* Copy both RAL/H (rar_entry_count) and SHRAL/H (+4) to PHY */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ mac_reg = er32(RAL(i));
+ hw->phy.ops.write_reg_page(hw, BM_RAR_L(i),
+ (u16)(mac_reg & 0xFFFF));
+ hw->phy.ops.write_reg_page(hw, BM_RAR_M(i),
+ (u16)((mac_reg >> 16) & 0xFFFF));
+
+ mac_reg = er32(RAH(i));
+ hw->phy.ops.write_reg_page(hw, BM_RAR_H(i),
+ (u16)(mac_reg & 0xFFFF));
+ hw->phy.ops.write_reg_page(hw, BM_RAR_CTRL(i),
+ (u16)((mac_reg & E1000_RAH_AV)
+ >> 16));
+ }
+
+ e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+release:
+ hw->phy.ops.release(hw);
+}
+
+/**
+ * e1000_lv_jumbo_workaround_ich8lan - required for jumbo frame operation
+ * with 82579 PHY
+ * @hw: pointer to the HW structure
+ * @enable: flag to enable/disable workaround when enabling/disabling jumbos
+ **/
+s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable)
+{
+ s32 ret_val = 0;
+ u16 phy_reg, data;
+ u32 mac_reg;
+ u16 i;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* disable Rx path while enabling/disabling workaround */
+ e1e_rphy(hw, PHY_REG(769, 20), &phy_reg);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg | (1 << 14));
+ if (ret_val)
+ goto out;
+
+ if (enable) {
+ /*
+ * Write Rx addresses (rar_entry_count for RAL/H, +4 for
+ * SHRAL/H) and initial CRC values to the MAC
+ */
+ for (i = 0; i < (hw->mac.rar_entry_count + 4); i++) {
+ u8 mac_addr[ETH_ALEN] = {0};
+ u32 addr_high, addr_low;
+
+ addr_high = er32(RAH(i));
+ if (!(addr_high & E1000_RAH_AV))
+ continue;
+ addr_low = er32(RAL(i));
+ mac_addr[0] = (addr_low & 0xFF);
+ mac_addr[1] = ((addr_low >> 8) & 0xFF);
+ mac_addr[2] = ((addr_low >> 16) & 0xFF);
+ mac_addr[3] = ((addr_low >> 24) & 0xFF);
+ mac_addr[4] = (addr_high & 0xFF);
+ mac_addr[5] = ((addr_high >> 8) & 0xFF);
+
+ ew32(PCH_RAICC(i), ~ether_crc_le(ETH_ALEN, mac_addr));
+ }
+
+ /* Write Rx addresses to the PHY */
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+ /* Enable jumbo frame workaround in the MAC */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(1 << 14);
+ mac_reg |= (7 << 15);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg |= E1000_RCTL_SECRC;
+ ew32(RCTL, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data | (1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Enable jumbo frame workaround in the PHY */
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ data |= (0x37 << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data &= ~(1 << 13);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x1A << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0xFE00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data | (1 << 10));
+ if (ret_val)
+ goto out;
+ } else {
+ /* Write MAC register values back to h/w defaults */
+ mac_reg = er32(FFLT_DBG);
+ mac_reg &= ~(0xF << 14);
+ ew32(FFLT_DBG, mac_reg);
+
+ mac_reg = er32(RCTL);
+ mac_reg &= ~E1000_RCTL_SECRC;
+ ew32(RCTL, mac_reg);
+
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ &data);
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_CTRL_OFFSET,
+ data & ~(1 << 0));
+ if (ret_val)
+ goto out;
+ ret_val = e1000e_read_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ &data);
+ if (ret_val)
+ goto out;
+ data &= ~(0xF << 8);
+ data |= (0xB << 8);
+ ret_val = e1000e_write_kmrn_reg(hw,
+ E1000_KMRNCTRLSTA_HD_CTRL,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Write PHY register values back to h/w defaults */
+ e1e_rphy(hw, PHY_REG(769, 23), &data);
+ data &= ~(0x7F << 5);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 23), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(769, 16), &data);
+ data |= (1 << 13);
+ ret_val = e1e_wphy(hw, PHY_REG(769, 16), data);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, PHY_REG(776, 20), &data);
+ data &= ~(0x3FF << 2);
+ data |= (0x8 << 2);
+ ret_val = e1e_wphy(hw, PHY_REG(776, 20), data);
+ if (ret_val)
+ goto out;
+ ret_val = e1e_wphy(hw, PHY_REG(776, 23), 0x7E00);
+ if (ret_val)
+ goto out;
+ e1e_rphy(hw, HV_PM_CTRL, &data);
+ ret_val = e1e_wphy(hw, HV_PM_CTRL, data & ~(1 << 10));
+ if (ret_val)
+ goto out;
+ }
+
+ /* re-enable Rx path after enabling/disabling workaround */
+ ret_val = e1e_wphy(hw, PHY_REG(769, 20), phy_reg & ~(1 << 14));
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_lv_phy_workarounds_ich8lan - A series of Phy workarounds to be
+ * done after every PHY reset.
+ **/
+static s32 e1000_lv_phy_workarounds_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* Set MDIO slow mode before any other MDIO access */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_k1_gig_workaround_lv - K1 Si workaround
+ * @hw: pointer to the HW structure
+ *
+ * Workaround to set the K1 beacon duration for 82579 parts
+ **/
+static s32 e1000_k1_workaround_lv(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 status_reg = 0;
+ u32 mac_reg;
+
+ if (hw->mac.type != e1000_pch2lan)
+ goto out;
+
+ /* Set K1 beacon duration based on 1Gbps speed or otherwise */
+ ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg);
+ if (ret_val)
+ goto out;
+
+ if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE))
+ == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) {
+ mac_reg = er32(FEXTNVM4);
+ mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK;
+
+ if (status_reg & HV_M_STATUS_SPEED_1000)
+ mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC;
+ else
+ mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC;
+
+ ew32(FEXTNVM4, mac_reg);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware
+ * @hw: pointer to the HW structure
+ * @gate: boolean set to true to gate, false to ungate
+ *
+ * Gate/ungate the automatic PHY configuration via hardware; perform
+ * the configuration via software instead.
+ **/
+static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate)
+{
+ u32 extcnf_ctrl;
+
+ if (hw->mac.type != e1000_pch2lan)
+ return;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (gate)
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+ else
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG;
+
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ return;
+}
+
+/**
+ * e1000_lan_init_done_ich8lan - Check for PHY config completion
+ * @hw: pointer to the HW structure
+ *
+ * Check the appropriate indication the MAC has finished configuring the
+ * PHY after a software reset.
+ **/
+static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
+{
+ u32 data, loop = E1000_ICH8_LAN_INIT_TIMEOUT;
+
+ /* Wait for basic configuration completes before proceeding */
+ do {
+ data = er32(STATUS);
+ data &= E1000_STATUS_LAN_INIT_DONE;
+ udelay(100);
+ } while ((!data) && --loop);
+
+ /*
+ * If basic configuration is incomplete before the above loop
+ * count reaches 0, loading the configuration from NVM will
+ * leave the PHY in a bad state possibly resulting in no link.
+ */
+ if (loop == 0)
+ e_dbg("LAN_INIT_DONE not set, increase timeout\n");
+
+ /* Clear the Init Done bit for the next init event */
+ data = er32(STATUS);
+ data &= ~E1000_STATUS_LAN_INIT_DONE;
+ ew32(STATUS, data);
+}
+
+/**
+ * e1000_post_phy_reset_ich8lan - Perform steps required after a PHY reset
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 reg;
+
+ if (e1000_check_reset_block(hw))
+ goto out;
+
+ /* Allow time for h/w to get to quiescent state after reset */
+ usleep_range(10000, 20000);
+
+ /* Perform any necessary post-reset workarounds */
+ switch (hw->mac.type) {
+ case e1000_pchlan:
+ ret_val = e1000_hv_phy_workarounds_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ break;
+ case e1000_pch2lan:
+ ret_val = e1000_lv_phy_workarounds_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ break;
+ default:
+ break;
+ }
+
+ /* Clear the host wakeup bit after lcd reset */
+ if (hw->mac.type >= e1000_pchlan) {
+ e1e_rphy(hw, BM_PORT_GEN_CFG, ®);
+ reg &= ~BM_WUC_HOST_WU_BIT;
+ e1e_wphy(hw, BM_PORT_GEN_CFG, reg);
+ }
+
+ /* Configure the LCD with the extended configuration region in NVM */
+ ret_val = e1000_sw_lcd_config_ich8lan(hw);
+ if (ret_val)
+ goto out;
+
+ /* Configure the LCD with the OEM bits in NVM */
+ ret_val = e1000_oem_bits_config_ich8lan(hw, true);
+
+ if (hw->mac.type == e1000_pch2lan) {
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) {
+ usleep_range(10000, 20000);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
+ /* Set EEE LPI Update Timer to 200usec */
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_ADDR,
+ I82579_LPI_UPDATE_TIMER);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.write_reg_locked(hw, I82579_EMI_DATA,
+ 0x1387);
+release:
+ hw->phy.ops.release(hw);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_phy_hw_reset_ich8lan - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Resets the PHY
+ * This is a function pointer entry point called by drivers
+ * or other shared routines.
+ **/
+static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /* Gate automatic PHY configuration by hardware on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_post_phy_reset_ich8lan(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_set_lplu_state_pchlan - Set Low Power Link Up state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU state according to the active flag. For PCH, if OEM write
+ * bit are disabled in the NVM, writing the LPLU bits in the MAC will not set
+ * the phy speed. This function will manually set the LPLU bit and restart
+ * auto-neg as hw would do. D3 and D0 LPLU will call the same function
+ * since it configures the same bit.
+ **/
+static s32 e1000_set_lplu_state_pchlan(struct e1000_hw *hw, bool active)
+{
+ s32 ret_val = 0;
+ u16 oem_reg;
+
+ ret_val = e1e_rphy(hw, HV_OEM_BITS, &oem_reg);
+ if (ret_val)
+ goto out;
+
+ if (active)
+ oem_reg |= HV_OEM_BITS_LPLU;
+ else
+ oem_reg &= ~HV_OEM_BITS_LPLU;
+
+ oem_reg |= HV_OEM_BITS_RESTART_AN;
+ ret_val = e1e_wphy(hw, HV_OEM_BITS, oem_reg);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_set_d0_lplu_state_ich8lan - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 phy_ctrl;
+ s32 ret_val = 0;
+ u16 data;
+
+ if (phy->type == e1000_phy_ife)
+ return ret_val;
+
+ phy_ctrl = er32(PHY_CTRL);
+
+ if (active) {
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
+ /*
+ * Call gig speed drop workaround on LPLU before accessing
+ * any PHY registers
+ */
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ phy_ctrl &= ~E1000_PHY_CTRL_D0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_set_d3_lplu_state_ich8lan - Set Low Power Linkup D3 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D3 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 e1000_set_d3_lplu_state_ich8lan(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 phy_ctrl;
+ s32 ret_val;
+ u16 data;
+
+ phy_ctrl = er32(PHY_CTRL);
+
+ if (!active) {
+ phy_ctrl &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ phy_ctrl |= E1000_PHY_CTRL_NOND0A_LPLU;
+ ew32(PHY_CTRL, phy_ctrl);
+
+ if (phy->type != e1000_phy_igp_3)
+ return 0;
+
+ /*
+ * Call gig speed drop workaround on LPLU before accessing
+ * any PHY registers
+ */
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_valid_nvm_bank_detect_ich8lan - finds out the valid bank 0 or 1
+ * @hw: pointer to the HW structure
+ * @bank: pointer to the variable that returns the active bank
+ *
+ * Reads signature byte from the NVM using the flash access registers.
+ * Word 0x13 bits 15:14 = 10b indicate a valid signature for that bank.
+ **/
+static s32 e1000_valid_nvm_bank_detect_ich8lan(struct e1000_hw *hw, u32 *bank)
+{
+ u32 eecd;
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 bank1_offset = nvm->flash_bank_size * sizeof(u16);
+ u32 act_offset = E1000_ICH_NVM_SIG_WORD * 2 + 1;
+ u8 sig_byte = 0;
+ s32 ret_val = 0;
+
+ switch (hw->mac.type) {
+ case e1000_ich8lan:
+ case e1000_ich9lan:
+ eecd = er32(EECD);
+ if ((eecd & E1000_EECD_SEC1VAL_VALID_MASK) ==
+ E1000_EECD_SEC1VAL_VALID_MASK) {
+ if (eecd & E1000_EECD_SEC1VAL)
+ *bank = 1;
+ else
+ *bank = 0;
+
+ return 0;
+ }
+ e_dbg("Unable to determine valid NVM bank via EEC - "
+ "reading flash signature\n");
+ /* fall-thru */
+ default:
+ /* set bank to 0 in case flash read fails */
+ *bank = 0;
+
+ /* Check bank 0 */
+ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset,
+ &sig_byte);
+ if (ret_val)
+ return ret_val;
+ if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+ E1000_ICH_NVM_SIG_VALUE) {
+ *bank = 0;
+ return 0;
+ }
+
+ /* Check bank 1 */
+ ret_val = e1000_read_flash_byte_ich8lan(hw, act_offset +
+ bank1_offset,
+ &sig_byte);
+ if (ret_val)
+ return ret_val;
+ if ((sig_byte & E1000_ICH_NVM_VALID_SIG_MASK) ==
+ E1000_ICH_NVM_SIG_VALUE) {
+ *bank = 1;
+ return 0;
+ }
+
+ e_dbg("ERROR: No valid NVM bank present\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_read_nvm_ich8lan - Read word(s) from the NVM
+ * @hw: pointer to the HW structure
+ * @offset: The offset (in bytes) of the word(s) to read.
+ * @words: Size of data to read in words
+ * @data: Pointer to the word(s) to read at offset.
+ *
+ * Reads a word(s) from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u32 act_offset;
+ s32 ret_val = 0;
+ u32 bank = 0;
+ u16 i, word;
+
+ if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ nvm->ops.acquire(hw);
+
+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+ if (ret_val) {
+ e_dbg("Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
+ }
+
+ act_offset = (bank) ? nvm->flash_bank_size : 0;
+ act_offset += offset;
+
+ ret_val = 0;
+ for (i = 0; i < words; i++) {
+ if (dev_spec->shadow_ram[offset+i].modified) {
+ data[i] = dev_spec->shadow_ram[offset+i].value;
+ } else {
+ ret_val = e1000_read_flash_word_ich8lan(hw,
+ act_offset + i,
+ &word);
+ if (ret_val)
+ break;
+ data[i] = word;
+ }
+ }
+
+ nvm->ops.release(hw);
+
+out:
+ if (ret_val)
+ e_dbg("NVM read error: %d\n", ret_val);
+
+ return ret_val;
+}
+
+/**
+ * e1000_flash_cycle_init_ich8lan - Initialize flash
+ * @hw: pointer to the HW structure
+ *
+ * This function does initial flash setup so that a new read/write/erase cycle
+ * can be started.
+ **/
+static s32 e1000_flash_cycle_init_ich8lan(struct e1000_hw *hw)
+{
+ union ich8_hws_flash_status hsfsts;
+ s32 ret_val = -E1000_ERR_NVM;
+
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+ /* Check if the flash descriptor is valid */
+ if (hsfsts.hsf_status.fldesvalid == 0) {
+ e_dbg("Flash descriptor invalid. "
+ "SW Sequencing must be used.\n");
+ return -E1000_ERR_NVM;
+ }
+
+ /* Clear FCERR and DAEL in hw status by writing 1 */
+ hsfsts.hsf_status.flcerr = 1;
+ hsfsts.hsf_status.dael = 1;
+
+ ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+ /*
+ * Either we should have a hardware SPI cycle in progress
+ * bit to check against, in order to start a new cycle or
+ * FDONE bit should be changed in the hardware so that it
+ * is 1 after hardware reset, which can then be used as an
+ * indication whether a cycle is in progress or has been
+ * completed.
+ */
+
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ /*
+ * There is no cycle running at present,
+ * so we can start a cycle.
+ * Begin by setting Flash Cycle Done.
+ */
+ hsfsts.hsf_status.flcdone = 1;
+ ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+ ret_val = 0;
+ } else {
+ s32 i = 0;
+
+ /*
+ * Otherwise poll for sometime so the current
+ * cycle has a chance to end before giving up.
+ */
+ for (i = 0; i < ICH_FLASH_READ_COMMAND_TIMEOUT; i++) {
+ hsfsts.regval = __er16flash(hw, ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcinprog == 0) {
+ ret_val = 0;
+ break;
+ }
+ udelay(1);
+ }
+ if (ret_val == 0) {
+ /*
+ * Successful in waiting for previous cycle to timeout,
+ * now set the Flash Cycle Done.
+ */
+ hsfsts.hsf_status.flcdone = 1;
+ ew16flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+ } else {
+ e_dbg("Flash controller busy, cannot get access\n");
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_flash_cycle_ich8lan - Starts flash cycle (read/write/erase)
+ * @hw: pointer to the HW structure
+ * @timeout: maximum time to wait for completion
+ *
+ * This function starts a flash cycle and waits for its completion.
+ **/
+static s32 e1000_flash_cycle_ich8lan(struct e1000_hw *hw, u32 timeout)
+{
+ union ich8_hws_flash_ctrl hsflctl;
+ union ich8_hws_flash_status hsfsts;
+ s32 ret_val = -E1000_ERR_NVM;
+ u32 i = 0;
+
+ /* Start a cycle by writing 1 in Flash Cycle Go in Hw Flash Control */
+ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcgo = 1;
+ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /* wait till FDONE bit is set to 1 */
+ do {
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcdone == 1)
+ break;
+ udelay(1);
+ } while (i++ < timeout);
+
+ if (hsfsts.hsf_status.flcdone == 1 && hsfsts.hsf_status.flcerr == 0)
+ return 0;
+
+ return ret_val;
+}
+
+/**
+ * e1000_read_flash_word_ich8lan - Read word from flash
+ * @hw: pointer to the HW structure
+ * @offset: offset to data location
+ * @data: pointer to the location for storing the data
+ *
+ * Reads the flash word at offset into data. Offset is converted
+ * to bytes before read.
+ **/
+static s32 e1000_read_flash_word_ich8lan(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ /* Must convert offset into bytes. */
+ offset <<= 1;
+
+ return e1000_read_flash_data_ich8lan(hw, offset, 2, data);
+}
+
+/**
+ * e1000_read_flash_byte_ich8lan - Read byte from flash
+ * @hw: pointer to the HW structure
+ * @offset: The offset of the byte to read.
+ * @data: Pointer to a byte to store the value read.
+ *
+ * Reads a single byte from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 *data)
+{
+ s32 ret_val;
+ u16 word = 0;
+
+ ret_val = e1000_read_flash_data_ich8lan(hw, offset, 1, &word);
+ if (ret_val)
+ return ret_val;
+
+ *data = (u8)word;
+
+ return 0;
+}
+
+/**
+ * e1000_read_flash_data_ich8lan - Read byte or word from NVM
+ * @hw: pointer to the HW structure
+ * @offset: The offset (in bytes) of the byte or word to read.
+ * @size: Size of data to read, 1=byte 2=word
+ * @data: Pointer to the word to store the value read.
+ *
+ * Reads a byte or word from the NVM using the flash access registers.
+ **/
+static s32 e1000_read_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 size, u16 *data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_addr;
+ u32 flash_data = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+ u8 count = 0;
+
+ if (size < 1 || size > 2 || offset > ICH_FLASH_LINEAR_ADDR_MASK)
+ return -E1000_ERR_NVM;
+
+ flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+ hw->nvm.flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
+ if (ret_val != 0)
+ break;
+
+ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size - 1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_READ;
+ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+ ret_val = e1000_flash_cycle_ich8lan(hw,
+ ICH_FLASH_READ_COMMAND_TIMEOUT);
+
+ /*
+ * Check if FCERR is set to 1, if set to 1, clear it
+ * and try the whole sequence a few more times, else
+ * read in (shift in) the Flash Data0, the order is
+ * least significant byte first msb to lsb
+ */
+ if (ret_val == 0) {
+ flash_data = er32flash(ICH_FLASH_FDATA0);
+ if (size == 1)
+ *data = (u8)(flash_data & 0x000000FF);
+ else if (size == 2)
+ *data = (u16)(flash_data & 0x0000FFFF);
+ break;
+ } else {
+ /*
+ * If we've gotten here, then things are probably
+ * completely hosed, but if the error condition is
+ * detected, it won't hurt to give it another try...
+ * ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1) {
+ /* Repeat for some time before giving up. */
+ continue;
+ } else if (hsfsts.hsf_status.flcdone == 0) {
+ e_dbg("Timeout error - flash cycle "
+ "did not complete.\n");
+ break;
+ }
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_nvm_ich8lan - Write word(s) to the NVM
+ * @hw: pointer to the HW structure
+ * @offset: The offset (in bytes) of the word(s) to write.
+ * @words: Size of data to write in words
+ * @data: Pointer to the word(s) to write at offset.
+ *
+ * Writes a byte or word to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_nvm_ich8lan(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u16 i;
+
+ if ((offset >= nvm->word_size) || (words > nvm->word_size - offset) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ nvm->ops.acquire(hw);
+
+ for (i = 0; i < words; i++) {
+ dev_spec->shadow_ram[offset+i].modified = true;
+ dev_spec->shadow_ram[offset+i].value = data[i];
+ }
+
+ nvm->ops.release(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_update_nvm_checksum_ich8lan - Update the checksum for NVM
+ * @hw: pointer to the HW structure
+ *
+ * The NVM checksum is updated by calling the generic update_nvm_checksum,
+ * which writes the checksum to the shadow ram. The changes in the shadow
+ * ram are then committed to the EEPROM by processing each bank at a time
+ * checking for the modified bit and writing only the pending changes.
+ * After a successful commit, the shadow ram is cleared and is ready for
+ * future writes.
+ **/
+static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u32 i, act_offset, new_bank_offset, old_bank_offset, bank;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1000e_update_nvm_checksum_generic(hw);
+ if (ret_val)
+ goto out;
+
+ if (nvm->type != e1000_nvm_flash_sw)
+ goto out;
+
+ nvm->ops.acquire(hw);
+
+ /*
+ * We're writing to the opposite bank so if we're on bank 1,
+ * write to bank 0 etc. We also need to erase the segment that
+ * is going to be written
+ */
+ ret_val = e1000_valid_nvm_bank_detect_ich8lan(hw, &bank);
+ if (ret_val) {
+ e_dbg("Could not detect valid bank, assuming bank 0\n");
+ bank = 0;
+ }
+
+ if (bank == 0) {
+ new_bank_offset = nvm->flash_bank_size;
+ old_bank_offset = 0;
+ ret_val = e1000_erase_flash_bank_ich8lan(hw, 1);
+ if (ret_val)
+ goto release;
+ } else {
+ old_bank_offset = nvm->flash_bank_size;
+ new_bank_offset = 0;
+ ret_val = e1000_erase_flash_bank_ich8lan(hw, 0);
+ if (ret_val)
+ goto release;
+ }
+
+ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+ /*
+ * Determine whether to write the value stored
+ * in the other NVM bank or a modified value stored
+ * in the shadow RAM
+ */
+ if (dev_spec->shadow_ram[i].modified) {
+ data = dev_spec->shadow_ram[i].value;
+ } else {
+ ret_val = e1000_read_flash_word_ich8lan(hw, i +
+ old_bank_offset,
+ &data);
+ if (ret_val)
+ break;
+ }
+
+ /*
+ * If the word is 0x13, then make sure the signature bits
+ * (15:14) are 11b until the commit has completed.
+ * This will allow us to write 10b which indicates the
+ * signature is valid. We want to do this after the write
+ * has completed so that we don't mark the segment valid
+ * while the write is still in progress
+ */
+ if (i == E1000_ICH_NVM_SIG_WORD)
+ data |= E1000_ICH_NVM_SIG_MASK;
+
+ /* Convert offset to bytes. */
+ act_offset = (i + new_bank_offset) << 1;
+
+ udelay(100);
+ /* Write the bytes to the new bank. */
+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+ act_offset,
+ (u8)data);
+ if (ret_val)
+ break;
+
+ udelay(100);
+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+ act_offset + 1,
+ (u8)(data >> 8));
+ if (ret_val)
+ break;
+ }
+
+ /*
+ * Don't bother writing the segment valid bits if sector
+ * programming failed.
+ */
+ if (ret_val) {
+ /* Possibly read-only, see e1000e_write_protect_nvm_ich8lan() */
+ e_dbg("Flash commit failed.\n");
+ goto release;
+ }
+
+ /*
+ * Finally validate the new segment by setting bit 15:14
+ * to 10b in word 0x13 , this can be done without an
+ * erase as well since these bits are 11 to start with
+ * and we need to change bit 14 to 0b
+ */
+ act_offset = new_bank_offset + E1000_ICH_NVM_SIG_WORD;
+ ret_val = e1000_read_flash_word_ich8lan(hw, act_offset, &data);
+ if (ret_val)
+ goto release;
+
+ data &= 0xBFFF;
+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
+ act_offset * 2 + 1,
+ (u8)(data >> 8));
+ if (ret_val)
+ goto release;
+
+ /*
+ * And invalidate the previously valid segment by setting
+ * its signature word (0x13) high_byte to 0b. This can be
+ * done without an erase because flash erase sets all bits
+ * to 1's. We can write 1's to 0's without an erase
+ */
+ act_offset = (old_bank_offset + E1000_ICH_NVM_SIG_WORD) * 2 + 1;
+ ret_val = e1000_retry_write_flash_byte_ich8lan(hw, act_offset, 0);
+ if (ret_val)
+ goto release;
+
+ /* Great! Everything worked, we can now clear the cached entries. */
+ for (i = 0; i < E1000_ICH8_SHADOW_RAM_WORDS; i++) {
+ dev_spec->shadow_ram[i].modified = false;
+ dev_spec->shadow_ram[i].value = 0xFFFF;
+ }
+
+release:
+ nvm->ops.release(hw);
+
+ /*
+ * Reload the EEPROM, or else modifications will not appear
+ * until after the next adapter reset.
+ */
+ if (!ret_val) {
+ e1000e_reload_nvm(hw);
+ usleep_range(10000, 20000);
+ }
+
+out:
+ if (ret_val)
+ e_dbg("NVM update error: %d\n", ret_val);
+
+ return ret_val;
+}
+
+/**
+ * e1000_validate_nvm_checksum_ich8lan - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Check to see if checksum needs to be fixed by reading bit 6 in word 0x19.
+ * If the bit is 0, that the EEPROM had been modified, but the checksum was not
+ * calculated, in which case we need to calculate the checksum and set bit 6.
+ **/
+static s32 e1000_validate_nvm_checksum_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 data;
+
+ /*
+ * Read 0x19 and check bit 6. If this bit is 0, the checksum
+ * needs to be fixed. This bit is an indication that the NVM
+ * was prepared by OEM software and did not calculate the
+ * checksum...a likely scenario.
+ */
+ ret_val = e1000_read_nvm(hw, 0x19, 1, &data);
+ if (ret_val)
+ return ret_val;
+
+ if ((data & 0x40) == 0) {
+ data |= 0x40;
+ ret_val = e1000_write_nvm(hw, 0x19, 1, &data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_update_nvm_checksum(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ * e1000e_write_protect_nvm_ich8lan - Make the NVM read-only
+ * @hw: pointer to the HW structure
+ *
+ * To prevent malicious write/erase of the NVM, set it to be read-only
+ * so that the hardware ignores all write/erase cycles of the NVM via
+ * the flash control registers. The shadow-ram copy of the NVM will
+ * still be updated, however any updates to this copy will not stick
+ * across driver reloads.
+ **/
+void e1000e_write_protect_nvm_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ union ich8_flash_protected_range pr0;
+ union ich8_hws_flash_status hsfsts;
+ u32 gfpreg;
+
+ nvm->ops.acquire(hw);
+
+ gfpreg = er32flash(ICH_FLASH_GFPREG);
+
+ /* Write-protect GbE Sector of NVM */
+ pr0.regval = er32flash(ICH_FLASH_PR0);
+ pr0.range.base = gfpreg & FLASH_GFPREG_BASE_MASK;
+ pr0.range.limit = ((gfpreg >> 16) & FLASH_GFPREG_BASE_MASK);
+ pr0.range.wpe = true;
+ ew32flash(ICH_FLASH_PR0, pr0.regval);
+
+ /*
+ * Lock down a subset of GbE Flash Control Registers, e.g.
+ * PR0 to prevent the write-protection from being lifted.
+ * Once FLOCKDN is set, the registers protected by it cannot
+ * be written until FLOCKDN is cleared by a hardware reset.
+ */
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ hsfsts.hsf_status.flockdn = true;
+ ew32flash(ICH_FLASH_HSFSTS, hsfsts.regval);
+
+ nvm->ops.release(hw);
+}
+
+/**
+ * e1000_write_flash_data_ich8lan - Writes bytes to the NVM
+ * @hw: pointer to the HW structure
+ * @offset: The offset (in bytes) of the byte/word to read.
+ * @size: Size of data to read, 1=byte 2=word
+ * @data: The byte(s) to write to the NVM.
+ *
+ * Writes one/two bytes to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_flash_data_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 size, u16 data)
+{
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_addr;
+ u32 flash_data = 0;
+ s32 ret_val;
+ u8 count = 0;
+
+ if (size < 1 || size > 2 || data > size * 0xff ||
+ offset > ICH_FLASH_LINEAR_ADDR_MASK)
+ return -E1000_ERR_NVM;
+
+ flash_linear_addr = (ICH_FLASH_LINEAR_ADDR_MASK & offset) +
+ hw->nvm.flash_base_addr;
+
+ do {
+ udelay(1);
+ /* Steps */
+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
+ if (ret_val)
+ break;
+
+ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+ /* 0b/1b corresponds to 1 or 2 byte size, respectively. */
+ hsflctl.hsf_ctrl.fldbcount = size -1;
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_WRITE;
+ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+ if (size == 1)
+ flash_data = (u32)data & 0x00FF;
+ else
+ flash_data = (u32)data;
+
+ ew32flash(ICH_FLASH_FDATA0, flash_data);
+
+ /*
+ * check if FCERR is set to 1 , if set to 1, clear it
+ * and try the whole sequence a few more times else done
+ */
+ ret_val = e1000_flash_cycle_ich8lan(hw,
+ ICH_FLASH_WRITE_COMMAND_TIMEOUT);
+ if (!ret_val)
+ break;
+
+ /*
+ * If we're here, then things are most likely
+ * completely hosed, but if the error condition
+ * is detected, it won't hurt to give it another
+ * try...ICH_FLASH_CYCLE_REPEAT_COUNT times.
+ */
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1)
+ /* Repeat for some time before giving up. */
+ continue;
+ if (hsfsts.hsf_status.flcdone == 0) {
+ e_dbg("Timeout error - flash cycle "
+ "did not complete.");
+ break;
+ }
+ } while (count++ < ICH_FLASH_CYCLE_REPEAT_COUNT);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_flash_byte_ich8lan - Write a single byte to NVM
+ * @hw: pointer to the HW structure
+ * @offset: The index of the byte to read.
+ * @data: The byte to write to the NVM.
+ *
+ * Writes a single byte to the NVM using the flash access registers.
+ **/
+static s32 e1000_write_flash_byte_ich8lan(struct e1000_hw *hw, u32 offset,
+ u8 data)
+{
+ u16 word = (u16)data;
+
+ return e1000_write_flash_data_ich8lan(hw, offset, 1, word);
+}
+
+/**
+ * e1000_retry_write_flash_byte_ich8lan - Writes a single byte to NVM
+ * @hw: pointer to the HW structure
+ * @offset: The offset of the byte to write.
+ * @byte: The byte to write to the NVM.
+ *
+ * Writes a single byte to the NVM using the flash access registers.
+ * Goes through a retry algorithm before giving up.
+ **/
+static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
+ u32 offset, u8 byte)
+{
+ s32 ret_val;
+ u16 program_retries;
+
+ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+ if (!ret_val)
+ return ret_val;
+
+ for (program_retries = 0; program_retries < 100; program_retries++) {
+ e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
+ udelay(100);
+ ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
+ if (!ret_val)
+ break;
+ }
+ if (program_retries == 100)
+ return -E1000_ERR_NVM;
+
+ return 0;
+}
+
+/**
+ * e1000_erase_flash_bank_ich8lan - Erase a bank (4k) from NVM
+ * @hw: pointer to the HW structure
+ * @bank: 0 for first bank, 1 for second bank, etc.
+ *
+ * Erases the bank specified. Each bank is a 4k block. Banks are 0 based.
+ * bank N is 4096 * N + flash_reg_addr.
+ **/
+static s32 e1000_erase_flash_bank_ich8lan(struct e1000_hw *hw, u32 bank)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ union ich8_hws_flash_status hsfsts;
+ union ich8_hws_flash_ctrl hsflctl;
+ u32 flash_linear_addr;
+ /* bank size is in 16bit words - adjust to bytes */
+ u32 flash_bank_size = nvm->flash_bank_size * 2;
+ s32 ret_val;
+ s32 count = 0;
+ s32 j, iteration, sector_size;
+
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+
+ /*
+ * Determine HW Sector size: Read BERASE bits of hw flash status
+ * register
+ * 00: The Hw sector is 256 bytes, hence we need to erase 16
+ * consecutive sectors. The start index for the nth Hw sector
+ * can be calculated as = bank * 4096 + n * 256
+ * 01: The Hw sector is 4K bytes, hence we need to erase 1 sector.
+ * The start index for the nth Hw sector can be calculated
+ * as = bank * 4096
+ * 10: The Hw sector is 8K bytes, nth sector = bank * 8192
+ * (ich9 only, otherwise error condition)
+ * 11: The Hw sector is 64K bytes, nth sector = bank * 65536
+ */
+ switch (hsfsts.hsf_status.berasesz) {
+ case 0:
+ /* Hw sector size 256 */
+ sector_size = ICH_FLASH_SEG_SIZE_256;
+ iteration = flash_bank_size / ICH_FLASH_SEG_SIZE_256;
+ break;
+ case 1:
+ sector_size = ICH_FLASH_SEG_SIZE_4K;
+ iteration = 1;
+ break;
+ case 2:
+ sector_size = ICH_FLASH_SEG_SIZE_8K;
+ iteration = 1;
+ break;
+ case 3:
+ sector_size = ICH_FLASH_SEG_SIZE_64K;
+ iteration = 1;
+ break;
+ default:
+ return -E1000_ERR_NVM;
+ }
+
+ /* Start with the base address, then add the sector offset. */
+ flash_linear_addr = hw->nvm.flash_base_addr;
+ flash_linear_addr += (bank) ? flash_bank_size : 0;
+
+ for (j = 0; j < iteration ; j++) {
+ do {
+ /* Steps */
+ ret_val = e1000_flash_cycle_init_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Write a value 11 (block Erase) in Flash
+ * Cycle field in hw flash control
+ */
+ hsflctl.regval = er16flash(ICH_FLASH_HSFCTL);
+ hsflctl.hsf_ctrl.flcycle = ICH_CYCLE_ERASE;
+ ew16flash(ICH_FLASH_HSFCTL, hsflctl.regval);
+
+ /*
+ * Write the last 24 bits of an index within the
+ * block into Flash Linear address field in Flash
+ * Address.
+ */
+ flash_linear_addr += (j * sector_size);
+ ew32flash(ICH_FLASH_FADDR, flash_linear_addr);
+
+ ret_val = e1000_flash_cycle_ich8lan(hw,
+ ICH_FLASH_ERASE_COMMAND_TIMEOUT);
+ if (ret_val == 0)
+ break;
+
+ /*
+ * Check if FCERR is set to 1. If 1,
+ * clear it and try the whole sequence
+ * a few more times else Done
+ */
+ hsfsts.regval = er16flash(ICH_FLASH_HSFSTS);
+ if (hsfsts.hsf_status.flcerr == 1)
+ /* repeat for some time before giving up */
+ continue;
+ else if (hsfsts.hsf_status.flcdone == 0)
+ return ret_val;
+ } while (++count < ICH_FLASH_CYCLE_REPEAT_COUNT);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_valid_led_default_ich8lan - Set the default LED settings
+ * @hw: pointer to the HW structure
+ * @data: Pointer to the LED settings
+ *
+ * Reads the LED default settings from the NVM to data. If the NVM LED
+ * settings is all 0's or F's, set the LED default to a valid LED default
+ * setting.
+ **/
+static s32 e1000_valid_led_default_ich8lan(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 ||
+ *data == ID_LED_RESERVED_FFFF)
+ *data = ID_LED_DEFAULT_ICH8LAN;
+
+ return 0;
+}
+
+/**
+ * e1000_id_led_init_pchlan - store LED configurations
+ * @hw: pointer to the HW structure
+ *
+ * PCH does not control LEDs via the LEDCTL register, rather it uses
+ * the PHY LED configuration register.
+ *
+ * PCH also does not have an "always on" or "always off" mode which
+ * complicates the ID feature. Instead of using the "on" mode to indicate
+ * in ledctl_mode2 the LEDs to use for ID (see e1000e_id_led_init()),
+ * use "link_up" mode. The LEDs will still ID on request if there is no
+ * link based on logic in e1000_led_[on|off]_pchlan().
+ **/
+static s32 e1000_id_led_init_pchlan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LINK_UP;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LINK_UP | E1000_PHY_LED0_IVRT;
+ u16 data, i, temp, shift;
+
+ /* Get default ID LED modes */
+ ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+ if (ret_val)
+ goto out;
+
+ mac->ledctl_default = er32(LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & E1000_LEDCTL_LED0_MODE_MASK;
+ shift = (i * 5);
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+ mac->ledctl_mode1 |= (ledctl_on << shift);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(E1000_PHY_LED0_MASK << shift);
+ mac->ledctl_mode1 |= (ledctl_off << shift);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+ mac->ledctl_mode2 |= (ledctl_on << shift);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(E1000_PHY_LED0_MASK << shift);
+ mac->ledctl_mode2 |= (ledctl_off << shift);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_bus_info_ich8lan - Get/Set the bus type and width
+ * @hw: pointer to the HW structure
+ *
+ * ICH8 use the PCI Express bus, but does not contain a PCI Express Capability
+ * register, so the the bus width is hard coded.
+ **/
+static s32 e1000_get_bus_info_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+
+ ret_val = e1000e_get_bus_info_pcie(hw);
+
+ /*
+ * ICH devices are "PCI Express"-ish. They have
+ * a configuration space, but do not contain
+ * PCI Express Capability registers, so bus width
+ * must be hardcoded.
+ */
+ if (bus->width == e1000_bus_width_unknown)
+ bus->width = e1000_bus_width_pcie_x1;
+
+ return ret_val;
+}
+
+/**
+ * e1000_reset_hw_ich8lan - Reset the hardware
+ * @hw: pointer to the HW structure
+ *
+ * Does a full reset of the hardware which includes a reset of the PHY and
+ * MAC.
+ **/
+static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u16 reg;
+ u32 ctrl, kab;
+ s32 ret_val;
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = e1000e_disable_pcie_master(hw);
+ if (ret_val)
+ e_dbg("PCI-E Master disable polling has failed.\n");
+
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ /*
+ * Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC
+ * with the global reset.
+ */
+ ew32(RCTL, 0);
+ ew32(TCTL, E1000_TCTL_PSP);
+ e1e_flush();
+
+ usleep_range(10000, 20000);
+
+ /* Workaround for ICH8 bit corruption issue in FIFO memory */
+ if (hw->mac.type == e1000_ich8lan) {
+ /* Set Tx and Rx buffer allocation to 8k apiece. */
+ ew32(PBA, E1000_PBA_8K);
+ /* Set Packet Buffer Size to 16k. */
+ ew32(PBS, E1000_PBS_16K);
+ }
+
+ if (hw->mac.type == e1000_pchlan) {
+ /* Save the NVM K1 bit setting*/
+ ret_val = e1000_read_nvm(hw, E1000_NVM_K1_CONFIG, 1, ®);
+ if (ret_val)
+ return ret_val;
+
+ if (reg & E1000_NVM_K1_ENABLE)
+ dev_spec->nvm_k1_enabled = true;
+ else
+ dev_spec->nvm_k1_enabled = false;
+ }
+
+ ctrl = er32(CTRL);
+
+ if (!e1000_check_reset_block(hw)) {
+ /*
+ * Full-chip reset requires MAC and PHY reset at the same
+ * time to make sure the interface between MAC and the
+ * external PHY is reset.
+ */
+ ctrl |= E1000_CTRL_PHY_RST;
+
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+ }
+ ret_val = e1000_acquire_swflag_ich8lan(hw);
+ e_dbg("Issuing a global reset to ich8lan\n");
+ ew32(CTRL, (ctrl | E1000_CTRL_RST));
+ /* cannot issue a flush here because it hangs the hardware */
+ msleep(20);
+
+ if (!ret_val)
+ mutex_unlock(&swflag_mutex);
+
+ if (ctrl & E1000_CTRL_PHY_RST) {
+ ret_val = hw->phy.ops.get_cfg_done(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1000_post_phy_reset_ich8lan(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * For PCH, this write will make sure that any noise
+ * will be detected as a CRC error and be dropped rather than show up
+ * as a bad packet to the DMA engine.
+ */
+ if (hw->mac.type == e1000_pchlan)
+ ew32(CRC_OFFSET, 0x65656565);
+
+ ew32(IMC, 0xffffffff);
+ er32(ICR);
+
+ kab = er32(KABGTXD);
+ kab |= E1000_KABGTXD_BGSQLBIAS;
+ ew32(KABGTXD, kab);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_ich8lan - Initialize the hardware
+ * @hw: pointer to the HW structure
+ *
+ * Prepares the hardware for transmit and receive by doing the following:
+ * - initialize hardware bits
+ * - initialize LED identification
+ * - setup receive address registers
+ * - setup flow control
+ * - setup transmit descriptors
+ * - clear statistics
+ **/
+static s32 e1000_init_hw_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl_ext, txdctl, snoop;
+ s32 ret_val;
+ u16 i;
+
+ e1000_initialize_hw_bits_ich8lan(hw);
+
+ /* Initialize identification LED */
+ ret_val = mac->ops.id_led_init(hw);
+ if (ret_val)
+ e_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+
+ /* Setup the receive address. */
+ e1000e_init_rx_addrs(hw, mac->rar_entry_count);
+
+ /* Zero out the Multicast HASH table */
+ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ /*
+ * The 82578 Rx buffer will stall if wakeup is enabled in host and
+ * the ME. Disable wakeup by clearing the host wakeup bit.
+ * Reset the phy after disabling host wakeup to reset the Rx buffer.
+ */
+ if (hw->phy.type == e1000_phy_82578) {
+ e1e_rphy(hw, BM_PORT_GEN_CFG, &i);
+ i &= ~BM_WUC_HOST_WU_BIT;
+ e1e_wphy(hw, BM_PORT_GEN_CFG, i);
+ ret_val = e1000_phy_hw_reset_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Setup link and flow control */
+ ret_val = e1000_setup_link_ich8lan(hw);
+
+ /* Set the transmit descriptor write-back policy for both queues */
+ txdctl = er32(TXDCTL(0));
+ txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ ew32(TXDCTL(0), txdctl);
+ txdctl = er32(TXDCTL(1));
+ txdctl = (txdctl & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB;
+ txdctl = (txdctl & ~E1000_TXDCTL_PTHRESH) |
+ E1000_TXDCTL_MAX_TX_DESC_PREFETCH;
+ ew32(TXDCTL(1), txdctl);
+
+ /*
+ * ICH8 has opposite polarity of no_snoop bits.
+ * By default, we should use snoop behavior.
+ */
+ if (mac->type == e1000_ich8lan)
+ snoop = PCIE_ICH8_SNOOP_ALL;
+ else
+ snoop = (u32) ~(PCIE_NO_SNOOP_ALL);
+ e1000e_set_pcie_no_snoop(hw, snoop);
+
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_RO_DIS;
+ ew32(CTRL_EXT, ctrl_ext);
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs_ich8lan(hw);
+
+ return 0;
+}
+/**
+ * e1000_initialize_hw_bits_ich8lan - Initialize required hardware bits
+ * @hw: pointer to the HW structure
+ *
+ * Sets/Clears required hardware bits necessary for correctly setting up the
+ * hardware for transmit and receive.
+ **/
+static void e1000_initialize_hw_bits_ich8lan(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ /* Extended Device Control */
+ reg = er32(CTRL_EXT);
+ reg |= (1 << 22);
+ /* Enable PHY low-power state when MAC is at D3 w/o WoL */
+ if (hw->mac.type >= e1000_pchlan)
+ reg |= E1000_CTRL_EXT_PHYPDEN;
+ ew32(CTRL_EXT, reg);
+
+ /* Transmit Descriptor Control 0 */
+ reg = er32(TXDCTL(0));
+ reg |= (1 << 22);
+ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
+ reg = er32(TXDCTL(1));
+ reg |= (1 << 22);
+ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
+ reg = er32(TARC(0));
+ if (hw->mac.type == e1000_ich8lan)
+ reg |= (1 << 28) | (1 << 29);
+ reg |= (1 << 23) | (1 << 24) | (1 << 26) | (1 << 27);
+ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
+ reg = er32(TARC(1));
+ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~(1 << 28);
+ else
+ reg |= (1 << 28);
+ reg |= (1 << 24) | (1 << 26) | (1 << 30);
+ ew32(TARC(1), reg);
+
+ /* Device Status */
+ if (hw->mac.type == e1000_ich8lan) {
+ reg = er32(STATUS);
+ reg &= ~(1 << 31);
+ ew32(STATUS, reg);
+ }
+
+ /*
+ * work-around descriptor data corruption issue during nfs v2 udp
+ * traffic, just disable the nfs filtering capability
+ */
+ reg = er32(RFCTL);
+ reg |= (E1000_RFCTL_NFSW_DIS | E1000_RFCTL_NFSR_DIS);
+ ew32(RFCTL, reg);
+}
+
+/**
+ * e1000_setup_link_ich8lan - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+static s32 e1000_setup_link_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ if (e1000_check_reset_block(hw))
+ return 0;
+
+ /*
+ * ICH parts do not have a word in the NVM to determine
+ * the default flow control setting, so we explicitly
+ * set it to full.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ /* Workaround h/w hang when Tx flow control enabled */
+ if (hw->mac.type == e1000_pchlan)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else
+ hw->fc.requested_mode = e1000_fc_full;
+ }
+
+ /*
+ * Save off the requested flow control mode for use later. Depending
+ * on the link partner's capabilities, we may or may not use this mode.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ e_dbg("After fix-ups FlowControl is now = %x\n",
+ hw->fc.current_mode);
+
+ /* Continue to configure the copper link. */
+ ret_val = e1000_setup_copper_link_ich8lan(hw);
+ if (ret_val)
+ return ret_val;
+
+ ew32(FCTTV, hw->fc.pause_time);
+ if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
+ (hw->phy.type == e1000_phy_82577)) {
+ ew32(FCRTV_PCH, hw->fc.refresh_time);
+
+ ret_val = e1e_wphy(hw, PHY_REG(BM_PORT_CTRL_PAGE, 27),
+ hw->fc.pause_time);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return e1000e_set_fc_watermarks(hw);
+}
+
+/**
+ * e1000_setup_copper_link_ich8lan - Configure MAC/PHY interface
+ * @hw: pointer to the HW structure
+ *
+ * Configures the kumeran interface to the PHY to wait the appropriate time
+ * when polling the PHY, then call the generic setup_copper_link to finish
+ * configuring the copper link.
+ **/
+static s32 e1000_setup_copper_link_ich8lan(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+ u16 reg_data;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ /*
+ * Set the mac to wait the maximum time between each iteration
+ * and increase the max iterations when polling the phy;
+ * this fixes erroneous timeouts at 10Mbps.
+ */
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_TIMEOUTS, 0xFFFF);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ ®_data);
+ if (ret_val)
+ return ret_val;
+ reg_data |= 0x3F;
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_INBAND_PARAM,
+ reg_data);
+ if (ret_val)
+ return ret_val;
+
+ switch (hw->phy.type) {
+ case e1000_phy_igp_3:
+ ret_val = e1000e_copper_link_setup_igp(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ case e1000_phy_bm:
+ case e1000_phy_82578:
+ ret_val = e1000e_copper_link_setup_m88(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ case e1000_phy_82577:
+ case e1000_phy_82579:
+ ret_val = e1000_copper_link_setup_82577(hw);
+ if (ret_val)
+ return ret_val;
+ break;
+ case e1000_phy_ife:
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, ®_data);
+ if (ret_val)
+ return ret_val;
+
+ reg_data &= ~IFE_PMC_AUTO_MDIX;
+
+ switch (hw->phy.mdix) {
+ case 1:
+ reg_data &= ~IFE_PMC_FORCE_MDIX;
+ break;
+ case 2:
+ reg_data |= IFE_PMC_FORCE_MDIX;
+ break;
+ case 0:
+ default:
+ reg_data |= IFE_PMC_AUTO_MDIX;
+ break;
+ }
+ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, reg_data);
+ if (ret_val)
+ return ret_val;
+ break;
+ default:
+ break;
+ }
+ return e1000e_setup_copper_link(hw);
+}
+
+/**
+ * e1000_get_link_up_info_ich8lan - Get current link speed and duplex
+ * @hw: pointer to the HW structure
+ * @speed: pointer to store current link speed
+ * @duplex: pointer to store the current link duplex
+ *
+ * Calls the generic get_speed_and_duplex to retrieve the current link
+ * information and then calls the Kumeran lock loss workaround for links at
+ * gigabit speeds.
+ **/
+static s32 e1000_get_link_up_info_ich8lan(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 ret_val;
+
+ ret_val = e1000e_get_speed_and_duplex_copper(hw, speed, duplex);
+ if (ret_val)
+ return ret_val;
+
+ if ((hw->mac.type == e1000_ich8lan) &&
+ (hw->phy.type == e1000_phy_igp_3) &&
+ (*speed == SPEED_1000)) {
+ ret_val = e1000_kmrn_lock_loss_workaround_ich8lan(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_kmrn_lock_loss_workaround_ich8lan - Kumeran workaround
+ * @hw: pointer to the HW structure
+ *
+ * Work-around for 82566 Kumeran PCS lock loss:
+ * On link status change (i.e. PCI reset, speed change) and link is up and
+ * speed is gigabit-
+ * 0) if workaround is optionally disabled do nothing
+ * 1) wait 1ms for Kumeran link to come up
+ * 2) check Kumeran Diagnostic register PCS lock loss bit
+ * 3) if not set the link is locked (all is good), otherwise...
+ * 4) reset the PHY
+ * 5) repeat up to 10 times
+ * Note: this is only called for IGP3 copper when speed is 1gb.
+ **/
+static s32 e1000_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+ u32 phy_ctrl;
+ s32 ret_val;
+ u16 i, data;
+ bool link;
+
+ if (!dev_spec->kmrn_lock_loss_workaround_enabled)
+ return 0;
+
+ /*
+ * Make sure link is up before proceeding. If not just return.
+ * Attempting this while link is negotiating fouled up link
+ * stability
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (!link)
+ return 0;
+
+ for (i = 0; i < 10; i++) {
+ /* read once to clear */
+ ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+ if (ret_val)
+ return ret_val;
+ /* and again to get new status */
+ ret_val = e1e_rphy(hw, IGP3_KMRN_DIAG, &data);
+ if (ret_val)
+ return ret_val;
+
+ /* check for PCS lock */
+ if (!(data & IGP3_KMRN_DIAG_PCS_LOCK_LOSS))
+ return 0;
+
+ /* Issue PHY reset */
+ e1000_phy_hw_reset(hw);
+ mdelay(5);
+ }
+ /* Disable GigE link negotiation */
+ phy_ctrl = er32(PHY_CTRL);
+ phy_ctrl |= (E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+ ew32(PHY_CTRL, phy_ctrl);
+
+ /*
+ * Call gig speed drop workaround on Gig disable before accessing
+ * any PHY registers
+ */
+ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* unable to acquire PCS lock */
+ return -E1000_ERR_PHY;
+}
+
+/**
+ * e1000_set_kmrn_lock_loss_workaround_ich8lan - Set Kumeran workaround state
+ * @hw: pointer to the HW structure
+ * @state: boolean value used to set the current Kumeran workaround state
+ *
+ * If ICH8, set the current Kumeran workaround state (enabled - true
+ * /disabled - false).
+ **/
+void e1000e_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
+ bool state)
+{
+ struct e1000_dev_spec_ich8lan *dev_spec = &hw->dev_spec.ich8lan;
+
+ if (hw->mac.type != e1000_ich8lan) {
+ e_dbg("Workaround applies to ICH8 only.\n");
+ return;
+ }
+
+ dev_spec->kmrn_lock_loss_workaround_enabled = state;
+}
+
+/**
+ * e1000_ipg3_phy_powerdown_workaround_ich8lan - Power down workaround on D3
+ * @hw: pointer to the HW structure
+ *
+ * Workaround for 82566 power-down on D3 entry:
+ * 1) disable gigabit link
+ * 2) write VR power-down enable
+ * 3) read it back
+ * Continue if successful, else issue LCD reset and repeat
+ **/
+void e1000e_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw)
+{
+ u32 reg;
+ u16 data;
+ u8 retry = 0;
+
+ if (hw->phy.type != e1000_phy_igp_3)
+ return;
+
+ /* Try the workaround twice (if needed) */
+ do {
+ /* Disable link */
+ reg = er32(PHY_CTRL);
+ reg |= (E1000_PHY_CTRL_GBE_DISABLE |
+ E1000_PHY_CTRL_NOND0A_GBE_DISABLE);
+ ew32(PHY_CTRL, reg);
+
+ /*
+ * Call gig speed drop workaround on Gig disable before
+ * accessing any PHY registers
+ */
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_gig_downshift_workaround_ich8lan(hw);
+
+ /* Write VR power-down enable */
+ e1e_rphy(hw, IGP3_VR_CTRL, &data);
+ data &= ~IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+ e1e_wphy(hw, IGP3_VR_CTRL, data | IGP3_VR_CTRL_MODE_SHUTDOWN);
+
+ /* Read it back and test */
+ e1e_rphy(hw, IGP3_VR_CTRL, &data);
+ data &= IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK;
+ if ((data == IGP3_VR_CTRL_MODE_SHUTDOWN) || retry)
+ break;
+
+ /* Issue PHY reset and repeat at most one more time */
+ reg = er32(CTRL);
+ ew32(CTRL, reg | E1000_CTRL_PHY_RST);
+ retry++;
+ } while (retry);
+}
+
+/**
+ * e1000e_gig_downshift_workaround_ich8lan - WoL from S5 stops working
+ * @hw: pointer to the HW structure
+ *
+ * Steps to take when dropping from 1Gb/s (eg. link cable removal (LSC),
+ * LPLU, Gig disable, MDIC PHY reset):
+ * 1) Set Kumeran Near-end loopback
+ * 2) Clear Kumeran Near-end loopback
+ * Should only be called for ICH8[m] devices with IGP_3 Phy.
+ **/
+void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 reg_data;
+
+ if ((hw->mac.type != e1000_ich8lan) ||
+ (hw->phy.type != e1000_phy_igp_3))
+ return;
+
+ ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ ®_data);
+ if (ret_val)
+ return;
+ reg_data |= E1000_KMRNCTRLSTA_DIAG_NELPBK;
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
+ if (ret_val)
+ return;
+ reg_data &= ~E1000_KMRNCTRLSTA_DIAG_NELPBK;
+ ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_DIAG_OFFSET,
+ reg_data);
+}
+
+/**
+ * e1000_suspend_workarounds_ich8lan - workarounds needed during S0->Sx
+ * @hw: pointer to the HW structure
+ *
+ * During S0 to Sx transition, it is possible the link remains at gig
+ * instead of negotiating to a lower speed. Before going to Sx, set
+ * 'LPLU Enabled' and 'Gig Disable' to force link speed negotiation
+ * to a lower speed. For PCH and newer parts, the OEM bits PHY register
+ * (LED, GbE disable and LPLU configurations) also needs to be written.
+ **/
+void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
+{
+ u32 phy_ctrl;
+ s32 ret_val;
+
+ phy_ctrl = er32(PHY_CTRL);
+ phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE;
+ ew32(PHY_CTRL, phy_ctrl);
+
+ if (hw->mac.type >= e1000_pchlan) {
+ e1000_oem_bits_config_ich8lan(hw, false);
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return;
+ e1000_write_smbus_addr(hw);
+ hw->phy.ops.release(hw);
+ }
+}
+
+/**
+ * e1000_resume_workarounds_pchlan - workarounds needed during Sx->S0
+ * @hw: pointer to the HW structure
+ *
+ * During Sx to S0 transitions on non-managed devices or managed devices
+ * on which PHY resets are not blocked, if the PHY registers cannot be
+ * accessed properly by the s/w toggle the LANPHYPC value to power cycle
+ * the PHY.
+ **/
+void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
+{
+ u32 fwsm;
+
+ if (hw->mac.type != e1000_pch2lan)
+ return;
+
+ fwsm = er32(FWSM);
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID) || !e1000_check_reset_block(hw)) {
+ u16 phy_id1, phy_id2;
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to acquire PHY semaphore in resume\n");
+ return;
+ }
+
+ /* Test access to the PHY registers by reading the ID regs */
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
+ if (ret_val)
+ goto release;
+ ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
+ if (ret_val)
+ goto release;
+
+ if (hw->phy.id == ((u32)(phy_id1 << 16) |
+ (u32)(phy_id2 & PHY_REVISION_MASK)))
+ goto release;
+
+ e1000_toggle_lanphypc_value_ich8lan(hw);
+
+ hw->phy.ops.release(hw);
+ msleep(50);
+ e1000_phy_hw_reset(hw);
+ msleep(50);
+ return;
+ }
+
+release:
+ hw->phy.ops.release(hw);
+
+ return;
+}
+
+/**
+ * e1000_cleanup_led_ich8lan - Restore the default LED operation
+ * @hw: pointer to the HW structure
+ *
+ * Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_ich8lan(struct e1000_hw *hw)
+{
+ if (hw->phy.type == e1000_phy_ife)
+ return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED, 0);
+
+ ew32(LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * e1000_led_on_ich8lan - Turn LEDs on
+ * @hw: pointer to the HW structure
+ *
+ * Turn on the LEDs.
+ **/
+static s32 e1000_led_on_ich8lan(struct e1000_hw *hw)
+{
+ if (hw->phy.type == e1000_phy_ife)
+ return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE | IFE_PSCL_PROBE_LEDS_ON));
+
+ ew32(LEDCTL, hw->mac.ledctl_mode2);
+ return 0;
+}
+
+/**
+ * e1000_led_off_ich8lan - Turn LEDs off
+ * @hw: pointer to the HW structure
+ *
+ * Turn off the LEDs.
+ **/
+static s32 e1000_led_off_ich8lan(struct e1000_hw *hw)
+{
+ if (hw->phy.type == e1000_phy_ife)
+ return e1e_wphy(hw, IFE_PHY_SPECIAL_CONTROL_LED,
+ (IFE_PSCL_PROBE_MODE |
+ IFE_PSCL_PROBE_LEDS_OFF));
+
+ ew32(LEDCTL, hw->mac.ledctl_mode1);
+ return 0;
+}
+
+/**
+ * e1000_setup_led_pchlan - Configures SW controllable LED
+ * @hw: pointer to the HW structure
+ *
+ * This prepares the SW controllable LED for use.
+ **/
+static s32 e1000_setup_led_pchlan(struct e1000_hw *hw)
+{
+ return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_mode1);
+}
+
+/**
+ * e1000_cleanup_led_pchlan - Restore the default LED operation
+ * @hw: pointer to the HW structure
+ *
+ * Return the LED back to the default configuration.
+ **/
+static s32 e1000_cleanup_led_pchlan(struct e1000_hw *hw)
+{
+ return e1e_wphy(hw, HV_LED_CONFIG, (u16)hw->mac.ledctl_default);
+}
+
+/**
+ * e1000_led_on_pchlan - Turn LEDs on
+ * @hw: pointer to the HW structure
+ *
+ * Turn on the LEDs.
+ **/
+static s32 e1000_led_on_pchlan(struct e1000_hw *hw)
+{
+ u16 data = (u16)hw->mac.ledctl_mode2;
+ u32 i, led;
+
+ /*
+ * If no link, then turn LED on by setting the invert bit
+ * for each LED that's mode is "link_up" in ledctl_mode2.
+ */
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ for (i = 0; i < 3; i++) {
+ led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+ if ((led & E1000_PHY_LED0_MODE_MASK) !=
+ E1000_LEDCTL_MODE_LINK_UP)
+ continue;
+ if (led & E1000_PHY_LED0_IVRT)
+ data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+ else
+ data |= (E1000_PHY_LED0_IVRT << (i * 5));
+ }
+ }
+
+ return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ * e1000_led_off_pchlan - Turn LEDs off
+ * @hw: pointer to the HW structure
+ *
+ * Turn off the LEDs.
+ **/
+static s32 e1000_led_off_pchlan(struct e1000_hw *hw)
+{
+ u16 data = (u16)hw->mac.ledctl_mode1;
+ u32 i, led;
+
+ /*
+ * If no link, then turn LED off by clearing the invert bit
+ * for each LED that's mode is "link_up" in ledctl_mode1.
+ */
+ if (!(er32(STATUS) & E1000_STATUS_LU)) {
+ for (i = 0; i < 3; i++) {
+ led = (data >> (i * 5)) & E1000_PHY_LED0_MASK;
+ if ((led & E1000_PHY_LED0_MODE_MASK) !=
+ E1000_LEDCTL_MODE_LINK_UP)
+ continue;
+ if (led & E1000_PHY_LED0_IVRT)
+ data &= ~(E1000_PHY_LED0_IVRT << (i * 5));
+ else
+ data |= (E1000_PHY_LED0_IVRT << (i * 5));
+ }
+ }
+
+ return e1e_wphy(hw, HV_LED_CONFIG, data);
+}
+
+/**
+ * e1000_get_cfg_done_ich8lan - Read config done bit after Full or PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Read appropriate register for the config done bit for completion status
+ * and configure the PHY through s/w for EEPROM-less parts.
+ *
+ * NOTE: some silicon which is EEPROM-less will fail trying to read the
+ * config done bit, so only an error is logged and continues. If we were
+ * to return with error, EEPROM-less silicon would not be able to be reset
+ * or change link.
+ **/
+static s32 e1000_get_cfg_done_ich8lan(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 bank = 0;
+ u32 status;
+
+ e1000e_get_cfg_done(hw);
+
+ /* Wait for indication from h/w that it has completed basic config */
+ if (hw->mac.type >= e1000_ich10lan) {
+ e1000_lan_init_done_ich8lan(hw);
+ } else {
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ e_dbg("Auto Read Done did not complete\n");
+ ret_val = 0;
+ }
+ }
+
+ /* Clear PHY Reset Asserted bit */
+ status = er32(STATUS);
+ if (status & E1000_STATUS_PHYRA)
+ ew32(STATUS, status & ~E1000_STATUS_PHYRA);
+ else
+ e_dbg("PHY Reset Asserted not set - needs delay\n");
+
+ /* If EEPROM is not marked present, init the IGP 3 PHY manually */
+ if (hw->mac.type <= e1000_ich9lan) {
+ if (((er32(EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3)) {
+ e1000e_phy_init_script_igp3(hw);
+ }
+ } else {
+ if (e1000_valid_nvm_bank_detect_ich8lan(hw, &bank)) {
+ /* Maybe we should do a basic PHY config */
+ e_dbg("EEPROM not present\n");
+ ret_val = -E1000_ERR_CONFIG;
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_power_down_phy_copper_ich8lan - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_ich8lan(struct e1000_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(hw->mac.ops.check_mng_mode(hw) ||
+ hw->phy.ops.check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+}
+
+/**
+ * e1000_clear_hw_cntrs_ich8lan - Clear statistical counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears hardware counters specific to the silicon family and calls
+ * clear_hw_cntrs_generic to clear all general purpose counters.
+ **/
+static void e1000_clear_hw_cntrs_ich8lan(struct e1000_hw *hw)
+{
+ u16 phy_data;
+ s32 ret_val;
+
+ e1000e_clear_hw_cntrs_base(hw);
+
+ er32(ALGNERRC);
+ er32(RXERRC);
+ er32(TNCRS);
+ er32(CEXTERR);
+ er32(TSCTC);
+ er32(TSCTFC);
+
+ er32(MGTPRC);
+ er32(MGTPDC);
+ er32(MGTPTC);
+
+ er32(IAC);
+ er32(ICRXOC);
+
+ /* Clear PHY statistics registers */
+ if ((hw->phy.type == e1000_phy_82578) ||
+ (hw->phy.type == e1000_phy_82579) ||
+ (hw->phy.type == e1000_phy_82577)) {
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return;
+ ret_val = hw->phy.ops.set_page(hw,
+ HV_STATS_PAGE << IGP_PAGE_SHIFT);
+ if (ret_val)
+ goto release;
+ hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+ hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+release:
+ hw->phy.ops.release(hw);
+ }
+}
+
+static struct e1000_mac_operations ich8_mac_ops = {
+ .id_led_init = e1000e_id_led_init,
+ /* check_mng_mode dependent on mac type */
+ .check_for_link = e1000_check_for_copper_link_ich8lan,
+ /* cleanup_led dependent on mac type */
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_ich8lan,
+ .get_bus_info = e1000_get_bus_info_ich8lan,
+ .set_lan_id = e1000_set_lan_id_single_port,
+ .get_link_up_info = e1000_get_link_up_info_ich8lan,
+ /* led_on dependent on mac type */
+ /* led_off dependent on mac type */
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .reset_hw = e1000_reset_hw_ich8lan,
+ .init_hw = e1000_init_hw_ich8lan,
+ .setup_link = e1000_setup_link_ich8lan,
+ .setup_physical_interface= e1000_setup_copper_link_ich8lan,
+ /* id_led_init dependent on mac type */
+};
+
+static struct e1000_phy_operations ich8_phy_ops = {
+ .acquire = e1000_acquire_swflag_ich8lan,
+ .check_reset_block = e1000_check_reset_block_ich8lan,
+ .commit = NULL,
+ .get_cfg_done = e1000_get_cfg_done_ich8lan,
+ .get_cable_length = e1000e_get_cable_length_igp_2,
+ .read_reg = e1000e_read_phy_reg_igp,
+ .release = e1000_release_swflag_ich8lan,
+ .reset = e1000_phy_hw_reset_ich8lan,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_ich8lan,
+ .set_d3_lplu_state = e1000_set_d3_lplu_state_ich8lan,
+ .write_reg = e1000e_write_phy_reg_igp,
+};
+
+static struct e1000_nvm_operations ich8_nvm_ops = {
+ .acquire = e1000_acquire_nvm_ich8lan,
+ .read = e1000_read_nvm_ich8lan,
+ .release = e1000_release_nvm_ich8lan,
+ .update = e1000_update_nvm_checksum_ich8lan,
+ .valid_led_default = e1000_valid_led_default_ich8lan,
+ .validate = e1000_validate_nvm_checksum_ich8lan,
+ .write = e1000_write_nvm_ich8lan,
+};
+
+struct e1000_info e1000_ich8_info = {
+ .mac = e1000_ich8lan,
+ .flags = FLAG_HAS_WOL
+ | FLAG_IS_ICH
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 8,
+ .max_hw_frame_size = ETH_FRAME_LEN + ETH_FCS_LEN,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_ich9_info = {
+ .mac = e1000_ich9lan,
+ .flags = FLAG_HAS_JUMBO_FRAMES
+ | FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_ERT
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 10,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_ich10_info = {
+ .mac = e1000_ich10lan,
+ .flags = FLAG_HAS_JUMBO_FRAMES
+ | FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_ERT
+ | FLAG_HAS_FLASH
+ | FLAG_APME_IN_WUC,
+ .pba = 10,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_pch_info = {
+ .mac = e1000_pchlan,
+ .flags = FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_DISABLE_FC_PAUSE_TIME /* errata */
+ | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS,
+ .pba = 26,
+ .max_hw_frame_size = 4096,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
+
+struct e1000_info e1000_pch2_info = {
+ .mac = e1000_pch2lan,
+ .flags = FLAG_IS_ICH
+ | FLAG_HAS_WOL
+ | FLAG_RX_CSUM_ENABLED
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_AMT
+ | FLAG_HAS_FLASH
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_APME_IN_WUC,
+ .flags2 = FLAG2_HAS_PHY_STATS
+ | FLAG2_HAS_EEE,
+ .pba = 26,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_ich8lan,
+ .mac_ops = &ich8_mac_ops,
+ .phy_ops = &ich8_phy_ops,
+ .nvm_ops = &ich8_nvm_ops,
+};
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000.h"
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+/* Intel(R) Active Management Technology signature */
+#define E1000_IAMT_SIGNATURE 0x544D4149
+
+/**
+ * e1000e_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 e1000e_get_bus_info_pcie(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_bus_info *bus = &hw->bus;
+ struct e1000_adapter *adapter = hw->adapter;
+ u16 pcie_link_status, cap_offset;
+
+ cap_offset = adapter->pdev->pcie_cap;
+ if (!cap_offset) {
+ bus->width = e1000_bus_width_unknown;
+ } else {
+ pci_read_config_word(adapter->pdev,
+ cap_offset + PCIE_LINK_STATUS,
+ &pcie_link_status);
+ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCIE_LINK_WIDTH_MASK) >>
+ PCIE_LINK_WIDTH_SHIFT);
+ }
+
+ mac->ops.set_lan_id(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ *
+ * @hw: pointer to the HW structure
+ *
+ * Determines the LAN function id by reading memory-mapped registers
+ * and swaps the port value if requested.
+ **/
+void e1000_set_lan_id_multi_port_pcie(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ u32 reg;
+
+ /*
+ * The status register reports the correct function number
+ * for the device regardless of function swap state.
+ */
+ reg = er32(STATUS);
+ bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+}
+
+/**
+ * e1000_set_lan_id_single_port - Set LAN id for a single port device
+ * @hw: pointer to the HW structure
+ *
+ * Sets the LAN function id to zero for a single port device.
+ **/
+void e1000_set_lan_id_single_port(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+
+ bus->func = 0;
+}
+
+/**
+ * e1000_clear_vfta_generic - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void e1000_clear_vfta_generic(struct e1000_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, 0);
+ e1e_flush();
+ }
+}
+
+/**
+ * e1000_write_vfta_generic - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+void e1000_write_vfta_generic(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, value);
+ e1e_flush();
+}
+
+/**
+ * e1000e_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setup the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void e1000e_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
+
+ /* Setup the receive address */
+ e_dbg("Programming MAC Address into RAR[0]\n");
+
+ e1000e_rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ e_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++)
+ e1000e_rar_set(hw, mac_addr, i);
+}
+
+/**
+ * e1000_check_alt_mac_addr_generic - Check for alternate MAC addr
+ * @hw: pointer to the HW structure
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
+ * address and must override the actual permanent MAC address. If an
+ * alternate MAC address is found it is programmed into RAR0, replacing
+ * the permanent address that was installed into RAR0 by the Si on reset.
+ * This function will return SUCCESS unless it encounters an error while
+ * reading the EEPROM.
+ **/
+s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw)
+{
+ u32 i;
+ s32 ret_val = 0;
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ALEN];
+
+ ret_val = e1000_read_nvm(hw, NVM_COMPAT, 1, &nvm_data);
+ if (ret_val)
+ goto out;
+
+ /* Check for LOM (vs. NIC) or one of two valid mezzanine cards */
+ if (!((nvm_data & NVM_COMPAT_LOM) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_DUAL) ||
+ (hw->adapter->pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)))
+ goto out;
+
+ ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_alt_mac_addr_offset == 0xFFFF) {
+ /* There is no Alternate MAC Address */
+ goto out;
+ }
+
+ if (hw->bus.func == E1000_FUNC_1)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
+ ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+ alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+ }
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (is_multicast_ether_addr(alt_mac_addr)) {
+ e_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+ goto out;
+ }
+
+ /*
+ * We have a valid alternate MAC address, and we want to treat it the
+ * same as the normal permanent MAC address stored by the HW into the
+ * RAR. Do this by mapping this address into RAR0.
+ */
+ e1000e_rar_set(hw, alt_mac_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+void e1000e_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ /*
+ * Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ ew32(RAL(index), rar_low);
+ e1e_flush();
+ ew32(RAH(index), rar_high);
+ e1e_flush();
+}
+
+/**
+ * e1000_hash_mc_addr - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * e1000_mta_set_generic()
+ **/
+static u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ /*
+ * The portion of the address that is used for the hash table
+ * is determined by the mc_filter_type setting.
+ * The algorithm is such that there is a total of 8 bits of shifting.
+ * The bit_shift for a mc_filter_type of 0 represents the number of
+ * left-shifts where the MSB of mc_addr[5] would still fall within
+ * the hash_mask. Case 0 does this exactly. Since there are a total
+ * of 8 bits of shifting, then mc_addr[4] will shift right the
+ * remaining number of bits. Thus 8 - bit_shift. The rest of the
+ * cases are a variation of this algorithm...essentially raising the
+ * number of bits to shift mc_addr[5] left, while still keeping the
+ * 8-bit shifting total.
+ *
+ * For example, given the following Destination MAC Address and an
+ * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+ * we can see that the bit_shift for case 0 is 4. These are the hash
+ * values resulting from each mc_filter_type...
+ * [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ *
+ * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+ * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+ * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
+ default:
+ case 0:
+ break;
+ case 1:
+ bit_shift += 1;
+ break;
+ case 2:
+ bit_shift += 2;
+ break;
+ case 3:
+ bit_shift += 4;
+ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * e1000e_update_mc_addr_list_generic - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void e1000e_update_mc_addr_list_generic(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = e1000_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, hw->mac.mta_shadow[i]);
+ e1e_flush();
+}
+
+/**
+ * e1000e_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
+void e1000e_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+ er32(CRCERRS);
+ er32(SYMERRS);
+ er32(MPC);
+ er32(SCC);
+ er32(ECOL);
+ er32(MCC);
+ er32(LATECOL);
+ er32(COLC);
+ er32(DC);
+ er32(SEC);
+ er32(RLEC);
+ er32(XONRXC);
+ er32(XONTXC);
+ er32(XOFFRXC);
+ er32(XOFFTXC);
+ er32(FCRUC);
+ er32(GPRC);
+ er32(BPRC);
+ er32(MPRC);
+ er32(GPTC);
+ er32(GORCL);
+ er32(GORCH);
+ er32(GOTCL);
+ er32(GOTCH);
+ er32(RNBC);
+ er32(RUC);
+ er32(RFC);
+ er32(ROC);
+ er32(RJC);
+ er32(TORL);
+ er32(TORH);
+ er32(TOTL);
+ er32(TOTH);
+ er32(TPR);
+ er32(TPT);
+ er32(MPTC);
+ er32(BPTC);
+}
+
+/**
+ * e1000e_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+s32 e1000e_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status)
+ return 0;
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link)
+ return ret_val; /* No link detected */
+
+ mac->get_link_status = false;
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ e1000e_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ return ret_val;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ e1000e_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val)
+ e_dbg("Error configuring flow control\n");
+
+ return ret_val;
+}
+
+/**
+ * e1000e_check_for_fiber_link - Check for link (Fiber)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ **/
+s32 e1000e_check_for_fiber_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), the cable is plugged in (we have signal),
+ * and our link partner is not trying to auto-negotiate with us (we
+ * are receiving idles or data), we need to force link up. We also
+ * need to give auto-negotiation time to complete, in case the cable
+ * was just plugged in. The autoneg_failed flag does this.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((ctrl & E1000_CTRL_SWDPIN1) && (!(status & E1000_STATUS_LU)) &&
+ (!(rxcw & E1000_RXCW_C))) {
+ if (mac->autoneg_failed == 0) {
+ mac->autoneg_failed = 1;
+ return 0;
+ }
+ e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error configuring flow control\n");
+ return ret_val;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ mac->serdes_has_link = true;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_check_for_serdes_link - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Checks for link up on the hardware. If link is not up and we have
+ * a signal, then we need to force link up.
+ **/
+s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ rxcw = er32(RXCW);
+
+ /*
+ * If we don't have link (auto-negotiation failed or link partner
+ * cannot auto-negotiate), and our link partner is not trying to
+ * auto-negotiate with us (we are receiving idles or data),
+ * we need to force link up. We also need to give auto-negotiation
+ * time to complete.
+ */
+ /* (ctrl & E1000_CTRL_SWDPIN1) == 1 == have signal */
+ if ((!(status & E1000_STATUS_LU)) && (!(rxcw & E1000_RXCW_C))) {
+ if (mac->autoneg_failed == 0) {
+ mac->autoneg_failed = 1;
+ return 0;
+ }
+ e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n");
+
+ /* Disable auto-negotiation in the TXCW register */
+ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+
+ /* Force link-up and also force full-duplex. */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after forcing link up. */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error configuring flow control\n");
+ return ret_val;
+ }
+ } else if ((ctrl & E1000_CTRL_SLU) && (rxcw & E1000_RXCW_C)) {
+ /*
+ * If we are forcing link and we are receiving /C/ ordered
+ * sets, re-enable auto-negotiation in the TXCW register
+ * and disable forced link in the Device Control register
+ * in an attempt to auto-negotiate with our link partner.
+ */
+ e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n");
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+
+ mac->serdes_has_link = true;
+ } else if (!(E1000_TXCW_ANE & er32(TXCW))) {
+ /*
+ * If we force link for non-auto-negotiation switch, check
+ * link status based on MAC synchronization for internal
+ * serdes media type.
+ */
+ /* SYNCH bit and IV bit are sticky. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ mac->serdes_has_link = true;
+ e_dbg("SERDES: Link up - forced.\n");
+ }
+ } else {
+ mac->serdes_has_link = false;
+ e_dbg("SERDES: Link down - force failed.\n");
+ }
+ }
+
+ if (E1000_TXCW_ANE & er32(TXCW)) {
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ /* SYNCH bit and IV bit are sticky, so reread rxcw. */
+ udelay(10);
+ rxcw = er32(RXCW);
+ if (rxcw & E1000_RXCW_SYNCH) {
+ if (!(rxcw & E1000_RXCW_IV)) {
+ mac->serdes_has_link = true;
+ e_dbg("SERDES: Link up - autoneg "
+ "completed successfully.\n");
+ } else {
+ mac->serdes_has_link = false;
+ e_dbg("SERDES: Link down - invalid"
+ "codewords detected in autoneg.\n");
+ }
+ } else {
+ mac->serdes_has_link = false;
+ e_dbg("SERDES: Link down - no sync.\n");
+ }
+ } else {
+ mac->serdes_has_link = false;
+ e_dbg("SERDES: Link down - autoneg failed\n");
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_set_default_fc_generic - Set flow control default values
+ * @hw: pointer to the HW structure
+ *
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
+static s32 e1000_set_default_fc_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 nvm_data;
+
+ /*
+ * Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc.requested_mode = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else
+ hw->fc.requested_mode = e1000_fc_full;
+
+ return 0;
+}
+
+/**
+ * e1000e_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+s32 e1000e_setup_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+
+ /*
+ * In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (e1000_check_reset_block(hw))
+ return 0;
+
+ /*
+ * If requested flow control is set to default, set flow control
+ * based on the EEPROM flow control settings.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = e1000_set_default_fc_generic(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /*
+ * Save off the requested flow control mode for use later. Depending
+ * on the link partner's capabilities, we may or may not use this mode.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ e_dbg("After fix-ups FlowControl is now = %x\n",
+ hw->fc.current_mode);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = mac->ops.setup_physical_interface(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ e_dbg("Initializing the Flow Control address, type and timer regs\n");
+ ew32(FCT, FLOW_CONTROL_TYPE);
+ ew32(FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ ew32(FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ ew32(FCTTV, hw->fc.pause_time);
+
+ return e1000e_set_fc_watermarks(hw);
+}
+
+/**
+ * e1000_commit_fc_settings_generic - Configure flow control
+ * @hw: pointer to the HW structure
+ *
+ * Write the flow control settings to the Transmit Config Word Register (TXCW)
+ * base on the flow control settings in e1000_mac_info.
+ **/
+static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 txcw;
+
+ /*
+ * Check for a software override of the flow control settings, and
+ * setup the device accordingly. If auto-negotiation is enabled, then
+ * software will have to set the "PAUSE" bits to the correct value in
+ * the Transmit Config Word Register (TXCW) and re-start auto-
+ * negotiation. However, if auto-negotiation is disabled, then
+ * software will have to manually configure the two flow control enable
+ * bits in the CTRL register.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but we
+ * do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ */
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /* Flow control completely disabled by a software over-ride. */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD);
+ break;
+ case e1000_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is disabled
+ * by a software over-ride. Since there really isn't a way to
+ * advertise that we are capable of Rx Pause ONLY, we will
+ * advertise that we support both symmetric and asymmetric Rx
+ * PAUSE. Later, we will disable the adapter's ability to send
+ * PAUSE frames.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ case e1000_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is disabled,
+ * by a software over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_ASM_DIR);
+ break;
+ case e1000_fc_full:
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
+ * over-ride.
+ */
+ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ break;
+ }
+
+ ew32(TXCW, txcw);
+ mac->txcw = txcw;
+
+ return 0;
+}
+
+/**
+ * e1000_poll_fiber_serdes_link_generic - Poll for link up
+ * @hw: pointer to the HW structure
+ *
+ * Polls for link up by reading the status register, if link fails to come
+ * up with auto-negotiation, then the link is forced if a signal is detected.
+ **/
+static s32 e1000_poll_fiber_serdes_link_generic(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 i, status;
+ s32 ret_val;
+
+ /*
+ * If we have a signal (the cable is plugged in, or assumed true for
+ * serdes media) then poll for a "Link-Up" indication in the Device
+ * Status Register. Time-out if a link isn't seen in 500 milliseconds
+ * seconds (Auto-negotiation should complete in less than 500
+ * milliseconds even if the other end is doing it in SW).
+ */
+ for (i = 0; i < FIBER_LINK_UP_LIMIT; i++) {
+ usleep_range(10000, 20000);
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ break;
+ }
+ if (i == FIBER_LINK_UP_LIMIT) {
+ e_dbg("Never got a valid link from auto-neg!!!\n");
+ mac->autoneg_failed = 1;
+ /*
+ * AutoNeg failed to achieve a link, so we'll call
+ * mac->check_for_link. This routine will force the
+ * link up if we detect a signal. This will allow us to
+ * communicate with non-autonegotiating link partners.
+ */
+ ret_val = mac->ops.check_for_link(hw);
+ if (ret_val) {
+ e_dbg("Error while checking for link\n");
+ return ret_val;
+ }
+ mac->autoneg_failed = 0;
+ } else {
+ mac->autoneg_failed = 0;
+ e_dbg("Valid Link Found\n");
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_setup_fiber_serdes_link - Setup link for fiber/serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configures collision distance and flow control for fiber and serdes
+ * links. Upon successful setup, poll for link.
+ **/
+s32 e1000e_setup_fiber_serdes_link(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+
+ /* Take the link out of reset */
+ ctrl &= ~E1000_CTRL_LRST;
+
+ e1000e_config_collision_dist(hw);
+
+ ret_val = e1000_commit_fc_settings_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Since auto-negotiation is enabled, take the link out of reset (the
+ * link will be in reset, because we previously reset the chip). This
+ * will restart auto-negotiation. If auto-negotiation is successful
+ * then the link-up status bit will be set and the flow control enable
+ * bits (RFCE and TFCE) will be set according to their negotiated value.
+ */
+ e_dbg("Auto-negotiation enabled\n");
+
+ ew32(CTRL, ctrl);
+ e1e_flush();
+ usleep_range(1000, 2000);
+
+ /*
+ * For these adapters, the SW definable pin 1 is set when the optics
+ * detect a signal. If we have a signal, then poll for a "Link-Up"
+ * indication.
+ */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+ (er32(CTRL) & E1000_CTRL_SWDPIN1)) {
+ ret_val = e1000_poll_fiber_serdes_link_generic(hw);
+ } else {
+ e_dbg("No signal detected\n");
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void e1000e_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
+ tctl = er32(TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ ew32(TCTL, tctl);
+ e1e_flush();
+}
+
+/**
+ * e1000e_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * transmission as well.
+ **/
+s32 e1000e_set_fc_watermarks(struct e1000_hw *hw)
+{
+ u32 fcrtl = 0, fcrth = 0;
+
+ /*
+ * Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
+ if (hw->fc.current_mode & e1000_fc_tx_pause) {
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ fcrtl = hw->fc.low_water;
+ fcrtl |= E1000_FCRTL_XONE;
+ fcrth = hw->fc.high_water;
+ }
+ ew32(FCRTL, fcrtl);
+ ew32(FCRTH, fcrth);
+
+ return 0;
+}
+
+/**
+ * e1000e_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * device control register to reflect the adapter settings. TFCE and RFCE
+ * need to be explicitly set by software when a copper PHY is used because
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
+s32 e1000e_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ ctrl = er32(CTRL);
+
+ /*
+ * Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc.current_mode" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+ e_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ew32(CTRL, ctrl);
+
+ return 0;
+}
+
+/**
+ * e1000e_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * speed and duplex were not forced. If the link needed to be forced, then
+ * flow control needs to be forced also. If auto-negotiation is enabled
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
+s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
+ /*
+ * Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_fiber ||
+ hw->phy.media_type == e1000_media_type_internal_serdes)
+ ret_val = e1000e_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ret_val = e1000e_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
+ e_dbg("Error forcing flow control settings\n");
+ return ret_val;
+ }
+
+ /*
+ * Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /*
+ * Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1e_rphy(hw, PHY_STATUS, &mii_status_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+ e_dbg("Copper PHY and Auto Neg "
+ "has not completed.\n");
+ return ret_val;
+ }
+
+ /*
+ * The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (Address 4) and the Auto_Negotiation Base
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
+ ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_nway_adv_reg);
+ if (ret_val)
+ return ret_val;
+ ret_val =
+ e1e_rphy(hw, PHY_LP_ABILITY, &mii_nway_lp_ability_reg);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise Rx
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ e_dbg("Flow Control = FULL.\r\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ e_dbg("Flow Control = "
+ "Rx PAUSE frames only.\r\n");
+ }
+ }
+ /*
+ * For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ e_dbg("Flow Control = Tx PAUSE frames only.\r\n");
+ }
+ /*
+ * For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ e_dbg("Flow Control = Rx PAUSE frames only.\r\n");
+ } else {
+ /*
+ * Per the IEEE spec, at this point flow control
+ * should be disabled.
+ */
+ hw->fc.current_mode = e1000_fc_none;
+ e_dbg("Flow Control = NONE.\r\n");
+ }
+
+ /*
+ * Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = mac->ops.get_link_up_info(hw, &speed, &duplex);
+ if (ret_val) {
+ e_dbg("Error getting link speed and duplex\n");
+ return ret_val;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc.current_mode = e1000_fc_none;
+
+ /*
+ * Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = e1000e_force_mac_fc(hw);
+ if (ret_val) {
+ e_dbg("Error forcing flow control settings\n");
+ return ret_val;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
+s32 e1000e_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ u32 status;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000)
+ *speed = SPEED_1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ *speed = SPEED_100;
+ else
+ *speed = SPEED_10;
+
+ if (status & E1000_STATUS_FD)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ e_dbg("%u Mbps, %s Duplex\n",
+ *speed == SPEED_1000 ? 1000 : *speed == SPEED_100 ? 100 : 10,
+ *duplex == FULL_DUPLEX ? "Full" : "Half");
+
+ return 0;
+}
+
+/**
+ * e1000e_get_speed_and_duplex_fiber_serdes - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Sets the speed and duplex to gigabit full duplex (the only possible option)
+ * for fiber/serdes links.
+ **/
+s32 e1000e_get_speed_and_duplex_fiber_serdes(struct e1000_hw *hw, u16 *speed, u16 *duplex)
+{
+ *speed = SPEED_1000;
+ *duplex = FULL_DUPLEX;
+
+ return 0;
+}
+
+/**
+ * e1000e_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = er32(SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ e_dbg("Driver can't access device - SMBI bit is set.\n");
+ return -E1000_ERR_NVM;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (er32(SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ e1000e_put_hw_semaphore(hw);
+ e_dbg("Driver can't access the NVM\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+void e1000e_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = er32(SWSM);
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ ew32(SWSM, swsm);
+}
+
+/**
+ * e1000e_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
+s32 e1000e_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
+ if (er32(EECD) & E1000_EECD_AUTO_RD)
+ break;
+ usleep_range(1000, 2000);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
+ e_dbg("Auto read by HW from NVM has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+s32 e1000e_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF)
+ *data = ID_LED_DEFAULT;
+
+ return 0;
+}
+
+/**
+ * e1000e_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 e1000e_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ ret_val = hw->nvm.ops.valid_led_default(hw, &data);
+ if (ret_val)
+ return ret_val;
+
+ mac->ledctl_default = er32(LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_setup_led_generic - Configures SW controllable LED
+ * @hw: pointer to the HW structure
+ *
+ * This prepares the SW controllable LED for use and saves the current state
+ * of the LED so it can be later restored.
+ **/
+s32 e1000e_setup_led_generic(struct e1000_hw *hw)
+{
+ u32 ledctl;
+
+ if (hw->mac.ops.setup_led != e1000e_setup_led_generic)
+ return -E1000_ERR_CONFIG;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ ledctl = er32(LEDCTL);
+ hw->mac.ledctl_default = ledctl;
+ /* Turn off LED0 */
+ ledctl &= ~(E1000_LEDCTL_LED0_IVRT |
+ E1000_LEDCTL_LED0_BLINK |
+ E1000_LEDCTL_LED0_MODE_MASK);
+ ledctl |= (E1000_LEDCTL_MODE_LED_OFF <<
+ E1000_LEDCTL_LED0_MODE_SHIFT);
+ ew32(LEDCTL, ledctl);
+ } else if (hw->phy.media_type == e1000_media_type_copper) {
+ ew32(LEDCTL, hw->mac.ledctl_mode1);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_cleanup_led_generic - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
+s32 e1000e_cleanup_led_generic(struct e1000_hw *hw)
+{
+ ew32(LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * e1000e_blink_led_generic - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the LEDs which are set to be on.
+ **/
+s32 e1000e_blink_led_generic(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
+ if (hw->phy.media_type == e1000_media_type_fiber) {
+ /* always blink LED0 for PCI-E fiber */
+ ledctl_blink = E1000_LEDCTL_LED0_BLINK |
+ (E1000_LEDCTL_MODE_LED_ON << E1000_LEDCTL_LED0_MODE_SHIFT);
+ } else {
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+ (i * 8));
+ }
+
+ ew32(LEDCTL, ledctl_blink);
+
+ return 0;
+}
+
+/**
+ * e1000e_led_on_generic - Turn LED on
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED on.
+ **/
+s32 e1000e_led_on_generic(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_fiber:
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ ew32(CTRL, ctrl);
+ break;
+ case e1000_media_type_copper:
+ ew32(LEDCTL, hw->mac.ledctl_mode2);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_led_off_generic - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
+s32 e1000e_led_off_generic(struct e1000_hw *hw)
+{
+ u32 ctrl;
+
+ switch (hw->phy.media_type) {
+ case e1000_media_type_fiber:
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ ew32(CTRL, ctrl);
+ break;
+ case e1000_media_type_copper:
+ ew32(LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_set_pcie_no_snoop - Set PCI-express capabilities
+ * @hw: pointer to the HW structure
+ * @no_snoop: bitmap of snoop events
+ *
+ * Set the PCI-express register to snoop for events enabled in 'no_snoop'.
+ **/
+void e1000e_set_pcie_no_snoop(struct e1000_hw *hw, u32 no_snoop)
+{
+ u32 gcr;
+
+ if (no_snoop) {
+ gcr = er32(GCR);
+ gcr &= ~(PCIE_NO_SNOOP_ALL);
+ gcr |= no_snoop;
+ ew32(GCR, gcr);
+ }
+}
+
+/**
+ * e1000e_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 if successful, else returns -10
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not caused
+ * the master requests to be disabled.
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ ew32(CTRL, ctrl);
+
+ while (timeout) {
+ if (!(er32(STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ e_dbg("Master requests are pending.\n");
+ return -E1000_ERR_MASTER_REQUESTS_PENDING;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_reset_adaptive - Reset Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Reset the Adaptive Interframe Spacing throttle to default values.
+ **/
+void e1000e_reset_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
+ mac->current_ifs_val = 0;
+ mac->ifs_min_val = IFS_MIN;
+ mac->ifs_max_val = IFS_MAX;
+ mac->ifs_step_size = IFS_STEP;
+ mac->ifs_ratio = IFS_RATIO;
+
+ mac->in_ifs_mode = false;
+ ew32(AIT, 0);
+out:
+ return;
+}
+
+/**
+ * e1000e_update_adaptive - Update Adaptive Interframe Spacing
+ * @hw: pointer to the HW structure
+ *
+ * Update the Adaptive Interframe Spacing Throttle value based on the
+ * time between transmitted packets and time between collisions.
+ **/
+void e1000e_update_adaptive(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!mac->adaptive_ifs) {
+ e_dbg("Not in Adaptive IFS mode!\n");
+ goto out;
+ }
+
+ if ((mac->collision_delta * mac->ifs_ratio) > mac->tx_packet_delta) {
+ if (mac->tx_packet_delta > MIN_NUM_XMITS) {
+ mac->in_ifs_mode = true;
+ if (mac->current_ifs_val < mac->ifs_max_val) {
+ if (!mac->current_ifs_val)
+ mac->current_ifs_val = mac->ifs_min_val;
+ else
+ mac->current_ifs_val +=
+ mac->ifs_step_size;
+ ew32(AIT, mac->current_ifs_val);
+ }
+ }
+ } else {
+ if (mac->in_ifs_mode &&
+ (mac->tx_packet_delta <= MIN_NUM_XMITS)) {
+ mac->current_ifs_val = 0;
+ mac->in_ifs_mode = false;
+ ew32(AIT, 0);
+ }
+ }
+out:
+ return;
+}
+
+/**
+ * e1000_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void e1000_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ e1e_flush();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void e1000_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ ew32(EECD, *eecd);
+ e1e_flush();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * e1000_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void e1000_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ ew32(EECD, eecd);
+ e1e_flush();
+
+ udelay(nvm->delay_usec);
+
+ e1000_raise_eec_clk(hw, &eecd);
+ e1000_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 e1000_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = er32(EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ e1000_raise_eec_clk(hw, &eecd);
+
+ eecd = er32(EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ e1000_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * e1000e_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+s32 e1000e_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = er32(EERD);
+ else
+ reg = er32(EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE)
+ return 0;
+
+ udelay(5);
+ }
+
+ return -E1000_ERR_NVM;
+}
+
+/**
+ * e1000e_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 e1000e_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = er32(EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+
+ ew32(EECD, eecd | E1000_EECD_REQ);
+ eecd = er32(EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = er32(EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+ e_dbg("Could not acquire NVM grant\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void e1000_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = er32(EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ e1000_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * e1000e_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void e1000e_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = er32(EECD);
+ eecd &= ~E1000_EECD_REQ;
+ ew32(EECD, eecd);
+}
+
+/**
+ * e1000_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u8 spi_stat_reg;
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ u16 timeout = NVM_MAX_RETRY_SPI;
+
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ ew32(EECD, eecd);
+ e1e_flush();
+ udelay(1);
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ e1000_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ e_dbg("SPI NVM Status error\n");
+ return -E1000_ERR_NVM;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 e1000e_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * too many words for the offset, and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ ew32(EERD, eerd);
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (er32(EERD) >> E1000_NVM_RW_REG_DATA);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 e1000e_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 widx = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = e1000_ready_nvm_eeprom(hw);
+ if (ret_val) {
+ nvm->ops.release(hw);
+ return ret_val;
+ }
+
+ e1000_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ e1000_standby_nvm(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ e1000_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ e1000_standby_nvm(hw);
+ break;
+ }
+ }
+ }
+
+ usleep_range(10000, 20000);
+ nvm->ops.release(hw);
+ return 0;
+}
+
+/**
+ * e1000_read_pba_string_generic - Read device part number
+ * @hw: pointer to the HW structure
+ * @pba_num: pointer to device part number
+ * @pba_num_size: size of part number buffer
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in pba_num.
+ **/
+s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num,
+ u32 pba_num_size)
+{
+ s32 ret_val;
+ u16 nvm_data;
+ u16 pba_ptr;
+ u16 offset;
+ u16 length;
+
+ if (pba_num == NULL) {
+ e_dbg("PBA string buffer was null\n");
+ ret_val = E1000_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ ret_val = e1000_read_nvm(hw, NVM_PBA_OFFSET_1, 1, &pba_ptr);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ /*
+ * if nvm_data is not ptr guard the PBA must be in legacy format which
+ * means pba_ptr is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (nvm_data != NVM_PBA_PTR_GUARD) {
+ e_dbg("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (pba_num_size < 11) {
+ e_dbg("PBA string buffer too small\n");
+ return E1000_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pba_ptr */
+ pba_num[0] = (nvm_data >> 12) & 0xF;
+ pba_num[1] = (nvm_data >> 8) & 0xF;
+ pba_num[2] = (nvm_data >> 4) & 0xF;
+ pba_num[3] = nvm_data & 0xF;
+ pba_num[4] = (pba_ptr >> 12) & 0xF;
+ pba_num[5] = (pba_ptr >> 8) & 0xF;
+ pba_num[6] = '-';
+ pba_num[7] = 0;
+ pba_num[8] = (pba_ptr >> 4) & 0xF;
+ pba_num[9] = pba_ptr & 0xF;
+
+ /* put a null character on the end of our string */
+ pba_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (pba_num[offset] < 0xA)
+ pba_num[offset] += '0';
+ else if (pba_num[offset] < 0x10)
+ pba_num[offset] += 'A' - 0xA;
+ }
+
+ goto out;
+ }
+
+ ret_val = e1000_read_nvm(hw, pba_ptr, 1, &length);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ e_dbg("NVM PBA number section invalid length\n");
+ ret_val = E1000_ERR_NVM_PBA_SECTION;
+ goto out;
+ }
+ /* check if pba_num buffer is big enough */
+ if (pba_num_size < (((u32)length * 2) - 1)) {
+ e_dbg("PBA string buffer too small\n");
+ ret_val = E1000_ERR_NO_SPACE;
+ goto out;
+ }
+
+ /* trim pba length from start of string */
+ pba_ptr++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = e1000_read_nvm(hw, pba_ptr + offset, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ goto out;
+ }
+ pba_num[offset * 2] = (u8)(nvm_data >> 8);
+ pba_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+ }
+ pba_num[offset * 2] = '\0';
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_mac_addr_generic - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 e1000_read_mac_addr_generic(struct e1000_hw *hw)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = er32(RAH(0));
+ rar_low = er32(RAL(0));
+
+ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return 0;
+}
+
+/**
+ * e1000e_validate_nvm_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 e1000e_validate_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ e_dbg("NVM Checksum Invalid\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_update_nvm_checksum_generic - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 e1000e_update_nvm_checksum_generic(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = e1000_read_nvm(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ e_dbg("NVM Read Error while updating checksum.\n");
+ return ret_val;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = e1000_write_nvm(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ e_dbg("NVM Write Error while updating checksum.\n");
+
+ return ret_val;
+}
+
+/**
+ * e1000e_reload_nvm - Reloads EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the
+ * extended control register.
+ **/
+void e1000e_reload_nvm(struct e1000_hw *hw)
+{
+ u32 ctrl_ext;
+
+ udelay(10);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+}
+
+/**
+ * e1000_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ *
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
+ **/
+static u8 e1000_calculate_checksum(u8 *buffer, u32 length)
+{
+ u32 i;
+ u8 sum = 0;
+
+ if (!buffer)
+ return 0;
+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8) (0 - sum);
+}
+
+/**
+ * e1000_mng_enable_host_if - Checks host interface is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND
+ *
+ * This function checks whether the HOST IF is enabled for command operation
+ * and also checks whether the previous command is completed. It busy waits
+ * in case of previous command is not completed.
+ **/
+static s32 e1000_mng_enable_host_if(struct e1000_hw *hw)
+{
+ u32 hicr;
+ u8 i;
+
+ if (!(hw->mac.arc_subsystem_valid)) {
+ e_dbg("ARC subsystem not valid.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ /* Check that the host interface is enabled. */
+ hicr = er32(HICR);
+ if ((hicr & E1000_HICR_EN) == 0) {
+ e_dbg("E1000_HOST_EN bit disabled.\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+ /* check the previous command is completed */
+ for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) {
+ hicr = er32(HICR);
+ if (!(hicr & E1000_HICR_C))
+ break;
+ mdelay(1);
+ }
+
+ if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) {
+ e_dbg("Previous command timeout failed .\n");
+ return -E1000_ERR_HOST_INTERFACE_COMMAND;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_check_mng_mode_generic - check management mode
+ * @hw: pointer to the HW structure
+ *
+ * Reads the firmware semaphore register and returns true (>0) if
+ * manageability is enabled, else false (0).
+ **/
+bool e1000e_check_mng_mode_generic(struct e1000_hw *hw)
+{
+ u32 fwsm = er32(FWSM);
+
+ return (fwsm & E1000_FWSM_MODE_MASK) ==
+ (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT);
+}
+
+/**
+ * e1000e_enable_tx_pkt_filtering - Enable packet filtering on Tx
+ * @hw: pointer to the HW structure
+ *
+ * Enables packet filtering on transmit packets if manageability is enabled
+ * and host interface is enabled.
+ **/
+bool e1000e_enable_tx_pkt_filtering(struct e1000_hw *hw)
+{
+ struct e1000_host_mng_dhcp_cookie *hdr = &hw->mng_cookie;
+ u32 *buffer = (u32 *)&hw->mng_cookie;
+ u32 offset;
+ s32 ret_val, hdr_csum, csum;
+ u8 i, len;
+
+ hw->mac.tx_pkt_filtering = true;
+
+ /* No manageability, no filtering */
+ if (!e1000e_check_mng_mode(hw)) {
+ hw->mac.tx_pkt_filtering = false;
+ goto out;
+ }
+
+ /*
+ * If we can't read from the host interface for whatever
+ * reason, disable filtering.
+ */
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val) {
+ hw->mac.tx_pkt_filtering = false;
+ goto out;
+ }
+
+ /* Read in the header. Length and offset are in dwords. */
+ len = E1000_MNG_DHCP_COOKIE_LENGTH >> 2;
+ offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2;
+ for (i = 0; i < len; i++)
+ *(buffer + i) = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset + i);
+ hdr_csum = hdr->checksum;
+ hdr->checksum = 0;
+ csum = e1000_calculate_checksum((u8 *)hdr,
+ E1000_MNG_DHCP_COOKIE_LENGTH);
+ /*
+ * If either the checksums or signature don't match, then
+ * the cookie area isn't considered valid, in which case we
+ * take the safe route of assuming Tx filtering is enabled.
+ */
+ if ((hdr_csum != csum) || (hdr->signature != E1000_IAMT_SIGNATURE)) {
+ hw->mac.tx_pkt_filtering = true;
+ goto out;
+ }
+
+ /* Cookie area is valid, make the final check for filtering. */
+ if (!(hdr->status & E1000_MNG_DHCP_COOKIE_STATUS_PARSING)) {
+ hw->mac.tx_pkt_filtering = false;
+ goto out;
+ }
+
+out:
+ return hw->mac.tx_pkt_filtering;
+}
+
+/**
+ * e1000_mng_write_cmd_header - Writes manageability command header
+ * @hw: pointer to the HW structure
+ * @hdr: pointer to the host interface command header
+ *
+ * Writes the command header after does the checksum calculation.
+ **/
+static s32 e1000_mng_write_cmd_header(struct e1000_hw *hw,
+ struct e1000_host_mng_command_header *hdr)
+{
+ u16 i, length = sizeof(struct e1000_host_mng_command_header);
+
+ /* Write the whole command header structure with new checksum. */
+
+ hdr->checksum = e1000_calculate_checksum((u8 *)hdr, length);
+
+ length >>= 2;
+ /* Write the relevant command block into the ram area. */
+ for (i = 0; i < length; i++) {
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, i,
+ *((u32 *) hdr + i));
+ e1e_flush();
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_mng_host_if_write - Write to the manageability host interface
+ * @hw: pointer to the HW structure
+ * @buffer: pointer to the host interface buffer
+ * @length: size of the buffer
+ * @offset: location in the buffer to write to
+ * @sum: sum of the data (not checksum)
+ *
+ * This function writes the buffer content at the offset given on the host if.
+ * It also does alignment considerations to do the writes in most efficient
+ * way. Also fills up the sum of the buffer in *buffer parameter.
+ **/
+static s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer,
+ u16 length, u16 offset, u8 *sum)
+{
+ u8 *tmp;
+ u8 *bufptr = buffer;
+ u32 data = 0;
+ u16 remaining, i, j, prev_bytes;
+
+ /* sum = only sum of the data and it is not checksum */
+
+ if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH)
+ return -E1000_ERR_PARAM;
+
+ tmp = (u8 *)&data;
+ prev_bytes = offset & 0x3;
+ offset >>= 2;
+
+ if (prev_bytes) {
+ data = E1000_READ_REG_ARRAY(hw, E1000_HOST_IF, offset);
+ for (j = prev_bytes; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset, data);
+ length -= j - prev_bytes;
+ offset++;
+ }
+
+ remaining = length & 0x3;
+ length -= remaining;
+
+ /* Calculate length in DWORDs */
+ length >>= 2;
+
+ /*
+ * The device driver writes the relevant command block into the
+ * ram area.
+ */
+ for (i = 0; i < length; i++) {
+ for (j = 0; j < sizeof(u32); j++) {
+ *(tmp + j) = *bufptr++;
+ *sum += *(tmp + j);
+ }
+
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+ }
+ if (remaining) {
+ for (j = 0; j < sizeof(u32); j++) {
+ if (j < remaining)
+ *(tmp + j) = *bufptr++;
+ else
+ *(tmp + j) = 0;
+
+ *sum += *(tmp + j);
+ }
+ E1000_WRITE_REG_ARRAY(hw, E1000_HOST_IF, offset + i, data);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_mng_write_dhcp_info - Writes DHCP info to host interface
+ * @hw: pointer to the HW structure
+ * @buffer: pointer to the host interface
+ * @length: size of the buffer
+ *
+ * Writes the DHCP information to the host interface.
+ **/
+s32 e1000e_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length)
+{
+ struct e1000_host_mng_command_header hdr;
+ s32 ret_val;
+ u32 hicr;
+
+ hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD;
+ hdr.command_length = length;
+ hdr.reserved1 = 0;
+ hdr.reserved2 = 0;
+ hdr.checksum = 0;
+
+ /* Enable the host interface */
+ ret_val = e1000_mng_enable_host_if(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Populate the host interface with the contents of "buffer". */
+ ret_val = e1000_mng_host_if_write(hw, buffer, length,
+ sizeof(hdr), &(hdr.checksum));
+ if (ret_val)
+ return ret_val;
+
+ /* Write the manageability command header */
+ ret_val = e1000_mng_write_cmd_header(hw, &hdr);
+ if (ret_val)
+ return ret_val;
+
+ /* Tell the ARC a new command is pending. */
+ hicr = er32(HICR);
+ ew32(HICR, hicr | E1000_HICR_C);
+
+ return 0;
+}
+
+/**
+ * e1000e_enable_mng_pass_thru - Check if management passthrough is needed
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
+ **/
+bool e1000e_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
+ manc = er32(MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
+ goto out;
+
+ if (hw->mac.has_fwsm) {
+ fwsm = er32(FWSM);
+ factps = er32(FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+ ret_val = true;
+ goto out;
+ }
+ } else if ((hw->mac.type == e1000_82574) ||
+ (hw->mac.type == e1000_82583)) {
+ u16 data;
+
+ factps = er32(FACTPS);
+ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((data & E1000_NVM_INIT_CTRL2_MNGM) ==
+ (e1000_mng_mode_pt << 13))) {
+ ret_val = true;
+ goto out;
+ }
+ } else if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ ret_val = true;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/interrupt.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/cpu.h>
+#include <linux/smp.h>
+#include <linux/pm_qos_params.h>
+#include <linux/pm_runtime.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+
+#include "e1000.h"
+
+#define DRV_EXTRAVERSION "-k"
+
+#define DRV_VERSION "1.3.16" DRV_EXTRAVERSION
+char e1000e_driver_name[] = "e1000e";
+const char e1000e_driver_version[] = DRV_VERSION;
+
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state);
+
+static const struct e1000_info *e1000_info_tbl[] = {
+ [board_82571] = &e1000_82571_info,
+ [board_82572] = &e1000_82572_info,
+ [board_82573] = &e1000_82573_info,
+ [board_82574] = &e1000_82574_info,
+ [board_82583] = &e1000_82583_info,
+ [board_80003es2lan] = &e1000_es2_info,
+ [board_ich8lan] = &e1000_ich8_info,
+ [board_ich9lan] = &e1000_ich9_info,
+ [board_ich10lan] = &e1000_ich10_info,
+ [board_pchlan] = &e1000_pch_info,
+ [board_pch2lan] = &e1000_pch2_info,
+};
+
+struct e1000_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */
+#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */
+#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */
+#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */
+#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */
+
+#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */
+#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */
+#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */
+
+static const struct e1000_reg_info e1000_reg_info_tbl[] = {
+
+ /* General Registers */
+ {E1000_CTRL, "CTRL"},
+ {E1000_STATUS, "STATUS"},
+ {E1000_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {E1000_ICR, "ICR"},
+
+ /* Rx Registers */
+ {E1000_RCTL, "RCTL"},
+ {E1000_RDLEN, "RDLEN"},
+ {E1000_RDH, "RDH"},
+ {E1000_RDT, "RDT"},
+ {E1000_RDTR, "RDTR"},
+ {E1000_RXDCTL(0), "RXDCTL"},
+ {E1000_ERT, "ERT"},
+ {E1000_RDBAL, "RDBAL"},
+ {E1000_RDBAH, "RDBAH"},
+ {E1000_RDFH, "RDFH"},
+ {E1000_RDFT, "RDFT"},
+ {E1000_RDFHS, "RDFHS"},
+ {E1000_RDFTS, "RDFTS"},
+ {E1000_RDFPC, "RDFPC"},
+
+ /* Tx Registers */
+ {E1000_TCTL, "TCTL"},
+ {E1000_TDBAL, "TDBAL"},
+ {E1000_TDBAH, "TDBAH"},
+ {E1000_TDLEN, "TDLEN"},
+ {E1000_TDH, "TDH"},
+ {E1000_TDT, "TDT"},
+ {E1000_TIDV, "TIDV"},
+ {E1000_TXDCTL(0), "TXDCTL"},
+ {E1000_TADV, "TADV"},
+ {E1000_TARC(0), "TARC"},
+ {E1000_TDFH, "TDFH"},
+ {E1000_TDFT, "TDFT"},
+ {E1000_TDFHS, "TDFHS"},
+ {E1000_TDFTS, "TDFTS"},
+ {E1000_TDFPC, "TDFPC"},
+
+ /* List Terminator */
+ {}
+};
+
+/*
+ * e1000_regdump - register printout routine
+ */
+static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo)
+{
+ int n = 0;
+ char rname[16];
+ u32 regs[8];
+
+ switch (reginfo->ofs) {
+ case E1000_RXDCTL(0):
+ for (n = 0; n < 2; n++)
+ regs[n] = __er32(hw, E1000_RXDCTL(n));
+ break;
+ case E1000_TXDCTL(0):
+ for (n = 0; n < 2; n++)
+ regs[n] = __er32(hw, E1000_TXDCTL(n));
+ break;
+ case E1000_TARC(0):
+ for (n = 0; n < 2; n++)
+ regs[n] = __er32(hw, E1000_TARC(n));
+ break;
+ default:
+ printk(KERN_INFO "%-15s %08x\n",
+ reginfo->name, __er32(hw, reginfo->ofs));
+ return;
+ }
+
+ snprintf(rname, 16, "%s%s", reginfo->name, "[0-1]");
+ printk(KERN_INFO "%-15s ", rname);
+ for (n = 0; n < 2; n++)
+ printk(KERN_CONT "%08x ", regs[n]);
+ printk(KERN_CONT "\n");
+}
+
+/*
+ * e1000e_dump - Print registers, Tx-ring and Rx-ring
+ */
+static void e1000e_dump(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_reg_info *reginfo;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_tx_desc *tx_desc;
+ struct my_u0 {
+ u64 a;
+ u64 b;
+ } *u0;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ union e1000_rx_desc_packet_split *rx_desc_ps;
+ struct e1000_rx_desc *rx_desc;
+ struct my_u1 {
+ u64 a;
+ u64 b;
+ u64 c;
+ u64 d;
+ } *u1;
+ u32 staterr;
+ int i = 0;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ printk(KERN_INFO "Device Name state "
+ "trans_start last_rx\n");
+ printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
+ netdev->name, netdev->state, netdev->trans_start,
+ netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ printk(KERN_INFO " Register Name Value\n");
+ for (reginfo = (struct e1000_reg_info *)e1000_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ e1000_regdump(hw, reginfo);
+ }
+
+ /* Print Tx Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "Tx Ring Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
+ " leng ntw timestamp\n");
+ buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
+ printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
+ 0, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (unsigned long long)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp);
+
+ /* Print Tx Ring */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "Tx Ring Dump\n");
+
+ /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended)
+ *
+ * Legacy Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] (Reserved on Write Back) |
+ * +--------------------------------------------------------------+
+ * 8 | Special | CSS | Status | CMD | CSO | Length |
+ * +--------------------------------------------------------------+
+ * 63 48 47 36 35 32 31 24 23 16 15 0
+ *
+ * Extended Context Descriptor (DTYP=0x0) for TSO or checksum offload
+ * 63 48 47 40 39 32 31 16 15 8 7 0
+ * +----------------------------------------------------------------+
+ * 0 | TUCSE | TUCS0 | TUCSS | IPCSE | IPCS0 | IPCSS |
+ * +----------------------------------------------------------------+
+ * 8 | MSS | HDRLEN | RSV | STA | TUCMD | DTYP | PAYLEN |
+ * +----------------------------------------------------------------+
+ * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
+ *
+ * Extended Data Descriptor (DTYP=0x1)
+ * +----------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +----------------------------------------------------------------+
+ * 8 | VLAN tag | POPTS | Rsvd | Status | Command | DTYP | DTALEN |
+ * +----------------------------------------------------------------+
+ * 63 48 47 40 39 36 35 32 31 24 23 20 19 0
+ */
+ printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]"
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Legacy format\n");
+ printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]"
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Ext Context format\n");
+ printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]"
+ " [bi->dma ] leng ntw timestamp bi->skb "
+ "<-- Ext Data format\n");
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX "
+ "%04X %3X %016llX %p",
+ (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' :
+ ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i,
+ (unsigned long long)le64_to_cpu(u0->a),
+ (unsigned long long)le64_to_cpu(u0->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->length, buffer_info->next_to_watch,
+ (unsigned long long)buffer_info->time_stamp,
+ buffer_info->skb);
+ if (i == tx_ring->next_to_use && i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC/U\n");
+ else if (i == tx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
+ print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS,
+ 16, 1, phys_to_virt(buffer_info->dma),
+ buffer_info->length, true);
+ }
+
+ /* Print Rx Ring Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "Rx Ring Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC]\n");
+ printk(KERN_INFO " %5d %5X %5X\n", 0,
+ rx_ring->next_to_use, rx_ring->next_to_clean);
+
+ /* Print Rx Ring */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "Rx Ring Dump\n");
+ switch (adapter->rx_ps_pages) {
+ case 1:
+ case 2:
+ case 3:
+ /* [Extended] Packet Split Receive Descriptor Format
+ *
+ * +-----------------------------------------------------+
+ * 0 | Buffer Address 0 [63:0] |
+ * +-----------------------------------------------------+
+ * 8 | Buffer Address 1 [63:0] |
+ * +-----------------------------------------------------+
+ * 16 | Buffer Address 2 [63:0] |
+ * +-----------------------------------------------------+
+ * 24 | Buffer Address 3 [63:0] |
+ * +-----------------------------------------------------+
+ */
+ printk(KERN_INFO "R [desc] [buffer 0 63:0 ] "
+ "[buffer 1 63:0 ] "
+ "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] "
+ "[bi->skb] <-- Ext Pkt Split format\n");
+ /* [Extended] Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 13 12 8 7 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet | IP | Rsvd | MRQ | Rsvd | MRQ RSS |
+ * | Checksum | Ident | | Queue | | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+ printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] "
+ "[vl l0 ee es] "
+ "[ l3 l2 l1 hs] [reserved ] ---------------- "
+ "[bi->skb] <-- Ext Rx Write-Back format\n");
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i);
+ u1 = (struct my_u1 *)rx_desc_ps;
+ staterr =
+ le32_to_cpu(rx_desc_ps->wb.middle.status_error);
+ if (staterr & E1000_RXD_STAT_DD) {
+ /* Descriptor Done */
+ printk(KERN_INFO "RWB[0x%03X] %016llX "
+ "%016llX %016llX %016llX "
+ "---------------- %p", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ buffer_info->skb);
+ } else {
+ printk(KERN_INFO "R [0x%03X] %016llX "
+ "%016llX %016llX %016llX %016llX %p", i,
+ (unsigned long long)le64_to_cpu(u1->a),
+ (unsigned long long)le64_to_cpu(u1->b),
+ (unsigned long long)le64_to_cpu(u1->c),
+ (unsigned long long)le64_to_cpu(u1->d),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb);
+
+ if (netif_msg_pktdata(adapter))
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(buffer_info->dma),
+ adapter->rx_ps_bsize0, true);
+ }
+
+ if (i == rx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == rx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+ }
+ break;
+ default:
+ case 0:
+ /* Legacy Receive Descriptor Format
+ *
+ * +-----------------------------------------------------+
+ * | Buffer Address [63:0] |
+ * +-----------------------------------------------------+
+ * | VLAN Tag | Errors | Status 0 | Packet csum | Length |
+ * +-----------------------------------------------------+
+ * 63 48 47 40 39 32 31 16 15 0
+ */
+ printk(KERN_INFO "Rl[desc] [address 63:0 ] "
+ "[vl er S cks ln] [bi->dma ] [bi->skb] "
+ "<-- Legacy format\n");
+ for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) {
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+ u0 = (struct my_u0 *)rx_desc;
+ printk(KERN_INFO "Rl[0x%03X] %016llX %016llX "
+ "%016llX %p", i,
+ (unsigned long long)le64_to_cpu(u0->a),
+ (unsigned long long)le64_to_cpu(u0->b),
+ (unsigned long long)buffer_info->dma,
+ buffer_info->skb);
+ if (i == rx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == rx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ if (netif_msg_pktdata(adapter))
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ phys_to_virt(buffer_info->dma),
+ adapter->rx_buffer_len, true);
+ }
+ }
+
+exit:
+ return;
+}
+
+/**
+ * e1000_desc_unused - calculate if we have unused descriptors
+ **/
+static int e1000_desc_unused(struct e1000_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/**
+ * e1000_receive_skb - helper function to handle Rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ **/
+static void e1000_receive_skb(struct e1000_adapter *adapter,
+ struct net_device *netdev, struct sk_buff *skb,
+ u8 status, __le16 vlan)
+{
+ u16 tag = le16_to_cpu(vlan);
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ if (status & E1000_RXD_STAT_VP)
+ __vlan_hwaccel_put_tag(skb, tag);
+
+ napi_gro_receive(&adapter->napi, skb);
+}
+
+/**
+ * e1000_rx_checksum - Receive Checksum Offload
+ * @adapter: board private structure
+ * @status_err: receive descriptor status and error fields
+ * @csum: receive descriptor csum field
+ * @sk_buff: socket buffer with received data
+ **/
+static void e1000_rx_checksum(struct e1000_adapter *adapter, u32 status_err,
+ u32 csum, struct sk_buff *skb)
+{
+ u16 status = (u16)status_err;
+ u8 errors = (u8)(status_err >> 24);
+
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set */
+ if (status & E1000_RXD_STAT_IXSM)
+ return;
+ /* TCP/UDP checksum error bit is set */
+ if (errors & E1000_RXD_ERR_TCPE) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+
+ /* TCP/UDP Checksum has not been calculated */
+ if (!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS)))
+ return;
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (status & E1000_RXD_STAT_TCPCS) {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else {
+ /*
+ * IP fragment with UDP payload
+ * Hardware complements the payload checksum, so we undo it
+ * and then put the value in host order for further stack use.
+ */
+ __sum16 sum = (__force __sum16)htons(csum);
+ skb->csum = csum_unfold(~sum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ }
+ adapter->hw_csum_good++;
+}
+
+/**
+ * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended
+ * @adapter: address of board private structure
+ **/
+static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter,
+ int cleaned_count, gfp_t gfp)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = adapter->rx_buffer_len;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
+ if (!skb) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ buffer_info->skb = skb;
+map_skb:
+ buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ dev_err(&pdev->dev, "Rx DMA map failed\n");
+ adapter->rx_dma_failed++;
+ break;
+ }
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ }
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ rx_ring->next_to_use = i;
+}
+
+/**
+ * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter,
+ int cleaned_count, gfp_t gfp)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_rx_desc_packet_split *rx_desc;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct sk_buff *skb;
+ unsigned int i, j;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+ ps_page = &buffer_info->ps_pages[j];
+ if (j >= adapter->rx_ps_pages) {
+ /* all unused desc entries get hw null ptr */
+ rx_desc->read.buffer_addr[j + 1] =
+ ~cpu_to_le64(0);
+ continue;
+ }
+ if (!ps_page->page) {
+ ps_page->page = alloc_page(gfp);
+ if (!ps_page->page) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ ps_page->dma = dma_map_page(&pdev->dev,
+ ps_page->page,
+ 0, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev,
+ ps_page->dma)) {
+ dev_err(&adapter->pdev->dev,
+ "Rx DMA page map failed\n");
+ adapter->rx_dma_failed++;
+ goto no_buffers;
+ }
+ }
+ /*
+ * Refresh the desc even if buffer_addrs
+ * didn't change because each write-back
+ * erases this info.
+ */
+ rx_desc->read.buffer_addr[j + 1] =
+ cpu_to_le64(ps_page->dma);
+ }
+
+ skb = __netdev_alloc_skb_ip_align(netdev,
+ adapter->rx_ps_bsize0,
+ gfp);
+
+ if (!skb) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ buffer_info->skb = skb;
+ buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
+ adapter->rx_ps_bsize0,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
+ dev_err(&pdev->dev, "Rx DMA map failed\n");
+ adapter->rx_dma_failed++;
+ /* cleanup skb */
+ dev_kfree_skb_any(skb);
+ buffer_info->skb = NULL;
+ break;
+ }
+
+ rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(!(i & (E1000_RX_BUFFER_WRITE - 1)))) {
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(i << 1, adapter->hw.hw_addr + rx_ring->tail);
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+no_buffers:
+ rx_ring->next_to_use = i;
+}
+
+/**
+ * e1000_alloc_jumbo_rx_buffers - Replace used jumbo receive buffers
+ * @adapter: address of board private structure
+ * @cleaned_count: number of buffers to allocate this pass
+ **/
+
+static void e1000_alloc_jumbo_rx_buffers(struct e1000_adapter *adapter,
+ int cleaned_count, gfp_t gfp)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_rx_desc *rx_desc;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = 256 - 16 /* for skb_reserve */;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (cleaned_count--) {
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto check_page;
+ }
+
+ skb = __netdev_alloc_skb_ip_align(netdev, bufsz, gfp);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ buffer_info->skb = skb;
+check_page:
+ /* allocate a new page if necessary */
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(gfp);
+ if (unlikely(!buffer_info->page)) {
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+ }
+
+ if (!buffer_info->dma)
+ buffer_info->dma = dma_map_page(&pdev->dev,
+ buffer_info->page, 0,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+
+ if (unlikely(++i == rx_ring->count))
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ }
+}
+
+/**
+ * e1000_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_rx_irq(struct e1000_adapter *adapter,
+ int *work_done, int work_to_do)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = 0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = 1;
+ cleaned_count++;
+ dma_unmap_single(&pdev->dev,
+ buffer_info->dma,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /*
+ * !EOP means multiple descriptors were used to store a single
+ * packet, if that's the case we need to toss it. In fact, we
+ * need to toss every packet with the EOP bit clear and the
+ * next frame that _does_ have the EOP bit set, as it is by
+ * definition only a frame fragment
+ */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP)))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
+ /* All receives must fit into a single buffer */
+ e_dbg("Receive packet consumed multiple buffers\n");
+ /* recycle */
+ buffer_info->skb = skb;
+ if (status & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+ goto next_desc;
+ }
+
+ if (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK) {
+ /* recycle */
+ buffer_info->skb = skb;
+ goto next_desc;
+ }
+
+ /* adjust length to remove Ethernet CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ length -= 4;
+
+ total_rx_bytes += length;
+ total_rx_packets++;
+
+ /*
+ * code added for copybreak, this should improve
+ * performance for small packets with large amounts
+ * of reassembly being done in the stack
+ */
+ if (length < copybreak) {
+ struct sk_buff *new_skb =
+ netdev_alloc_skb_ip_align(netdev, length);
+ if (new_skb) {
+ skb_copy_to_linear_data_offset(new_skb,
+ -NET_IP_ALIGN,
+ (skb->data -
+ NET_IP_ALIGN),
+ (length +
+ NET_IP_ALIGN));
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = skb;
+ skb = new_skb;
+ }
+ /* else just continue with the old one */
+ }
+ /* end copybreak code */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ e1000_receive_skb(adapter, netdev, skb,status,rx_desc->special);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
+ adapter->alloc_rx_buf(adapter, cleaned_count,
+ GFP_ATOMIC);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = e1000_desc_unused(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->total_rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+static void e1000_put_txbuf(struct e1000_adapter *adapter,
+ struct e1000_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+}
+
+static void e1000_print_hw_hang(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter,
+ print_hang_task);
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ unsigned int i = tx_ring->next_to_clean;
+ unsigned int eop = tx_ring->buffer_info[i].next_to_watch;
+ struct e1000_tx_desc *eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 phy_status, phy_1000t_status, phy_ext_status;
+ u16 pci_status;
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ e1e_rphy(hw, PHY_STATUS, &phy_status);
+ e1e_rphy(hw, PHY_1000T_STATUS, &phy_1000t_status);
+ e1e_rphy(hw, PHY_EXT_STATUS, &phy_ext_status);
+
+ pci_read_config_word(adapter->pdev, PCI_STATUS, &pci_status);
+
+ /* detected Hardware unit hang */
+ e_err("Detected Hardware Unit Hang:\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]:\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n"
+ "MAC Status <%x>\n"
+ "PHY Status <%x>\n"
+ "PHY 1000BASE-T Status <%x>\n"
+ "PHY Extended Status <%x>\n"
+ "PCI Status <%x>\n",
+ readl(adapter->hw.hw_addr + tx_ring->head),
+ readl(adapter->hw.hw_addr + tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->upper.fields.status,
+ er32(STATUS),
+ phy_status,
+ phy_1000t_status,
+ phy_ext_status,
+ pci_status);
+}
+
+/**
+ * e1000_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_tx_desc *tx_desc, *eop_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i, eop;
+ unsigned int count = 0;
+ unsigned int total_tx_bytes = 0, total_tx_packets = 0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+
+ while ((eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ bool cleaned = false;
+ rmb(); /* read buffer_info after eop_desc */
+ for (; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (cleaned) {
+ total_tx_packets += buffer_info->segs;
+ total_tx_bytes += buffer_info->bytecount;
+ }
+
+ e1000_put_txbuf(adapter, buffer_info);
+ tx_desc->upper.data = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ if (i == tx_ring->next_to_use)
+ break;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD 32
+ if (count && netif_carrier_ok(netdev) &&
+ e1000_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__E1000_DOWN, &adapter->state))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /*
+ * Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i
+ */
+ adapter->detect_tx_hung = 0;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp
+ + (adapter->tx_timeout_factor * HZ)) &&
+ !(er32(STATUS) & E1000_STATUS_TXOFF)) {
+ schedule_work(&adapter->print_hang_task);
+ netif_stop_queue(netdev);
+ }
+ }
+ adapter->total_tx_bytes += total_tx_bytes;
+ adapter->total_tx_packets += total_tx_packets;
+ return count < tx_ring->count;
+}
+
+/**
+ * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter,
+ int *work_done, int work_to_do)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ union e1000_rx_desc_packet_split *rx_desc, *next_rxd;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ struct e1000_ps_page *ps_page;
+ struct sk_buff *skb;
+ unsigned int i, j;
+ u32 length, staterr;
+ int cleaned_count = 0;
+ bool cleaned = 0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC_PS(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ skb = buffer_info->skb;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ /* in the packet split case this is header only */
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = E1000_RX_DESC_PS(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = 1;
+ cleaned_count++;
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ /* see !EOP comment in other Rx routine */
+ if (!(staterr & E1000_RXD_STAT_EOP))
+ adapter->flags2 |= FLAG2_IS_DISCARDING;
+
+ if (adapter->flags2 & FLAG2_IS_DISCARDING) {
+ e_dbg("Packet Split buffers didn't pick up the full "
+ "packet\n");
+ dev_kfree_skb_irq(skb);
+ if (staterr & E1000_RXD_STAT_EOP)
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+ goto next_desc;
+ }
+
+ if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ length = le16_to_cpu(rx_desc->wb.middle.length0);
+
+ if (!length) {
+ e_dbg("Last part of the packet spanning multiple "
+ "descriptors\n");
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ /* Good Receive */
+ skb_put(skb, length);
+
+ {
+ /*
+ * this looks ugly, but it seems compiler issues make it
+ * more efficient than reusing j
+ */
+ int l1 = le16_to_cpu(rx_desc->wb.upper.length[0]);
+
+ /*
+ * page alloc/put takes too long and effects small packet
+ * throughput, so unsplit small packets and save the alloc/put
+ * only valid in softirq (napi) context to call kmap_*
+ */
+ if (l1 && (l1 <= copybreak) &&
+ ((length + l1) <= adapter->rx_ps_bsize0)) {
+ u8 *vaddr;
+
+ ps_page = &buffer_info->ps_pages[0];
+
+ /*
+ * there is no documentation about how to call
+ * kmap_atomic, so we can't hold the mapping
+ * very long
+ */
+ dma_sync_single_for_cpu(&pdev->dev, ps_page->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+ vaddr = kmap_atomic(ps_page->page, KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr, l1);
+ kunmap_atomic(vaddr, KM_SKB_DATA_SOFTIRQ);
+ dma_sync_single_for_device(&pdev->dev, ps_page->dma,
+ PAGE_SIZE, DMA_FROM_DEVICE);
+
+ /* remove the CRC */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ l1 -= 4;
+
+ skb_put(skb, l1);
+ goto copydone;
+ } /* if */
+ }
+
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+ length = le16_to_cpu(rx_desc->wb.upper.length[j]);
+ if (!length)
+ break;
+
+ ps_page = &buffer_info->ps_pages[j];
+ dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ ps_page->dma = 0;
+ skb_fill_page_desc(skb, j, ps_page->page, 0, length);
+ ps_page->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ }
+
+ /* strip the ethernet crc, problem is we're using pages now so
+ * this whole operation can get a little cpu intensive
+ */
+ if (!(adapter->flags2 & FLAG2_CRC_STRIPPING))
+ pskb_trim(skb, skb->len - 4);
+
+copydone:
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ e1000_rx_checksum(adapter, staterr, le16_to_cpu(
+ rx_desc->wb.lower.hi_dword.csum_ip.csum), skb);
+
+ if (rx_desc->wb.upper.header_status &
+ cpu_to_le16(E1000_RXDPS_HDRSTAT_HDRSP))
+ adapter->rx_hdr_split++;
+
+ e1000_receive_skb(adapter, netdev, skb,
+ staterr, rx_desc->wb.middle.vlan);
+
+next_desc:
+ rx_desc->wb.middle.status_error &= cpu_to_le32(~0xFF);
+ buffer_info->skb = NULL;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= E1000_RX_BUFFER_WRITE) {
+ adapter->alloc_rx_buf(adapter, cleaned_count,
+ GFP_ATOMIC);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
+ staterr = le32_to_cpu(rx_desc->wb.middle.status_error);
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = e1000_desc_unused(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->total_rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_consume_page - helper function
+ **/
+static void e1000_consume_page(struct e1000_buffer *bi, struct sk_buff *skb,
+ u16 length)
+{
+ bi->page = NULL;
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+}
+
+/**
+ * e1000_clean_jumbo_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+
+static bool e1000_clean_jumbo_rx_irq(struct e1000_adapter *adapter,
+ int *work_done, int work_to_do)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_rx_desc *rx_desc, *next_rxd;
+ struct e1000_buffer *buffer_info, *next_buffer;
+ u32 length;
+ unsigned int i;
+ int cleaned_count = 0;
+ bool cleaned = false;
+ unsigned int total_rx_bytes=0, total_rx_packets=0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & E1000_RXD_STAT_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ ++i;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = E1000_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+ dma_unmap_page(&pdev->dev, buffer_info->dma, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+
+ /* errors is only valid for DD + EOP descriptors */
+ if (unlikely((status & E1000_RXD_STAT_EOP) &&
+ (rx_desc->errors & E1000_RXD_ERR_FRAME_ERR_MASK))) {
+ /* recycle both page and skb */
+ buffer_info->skb = skb;
+ /* an error means any chain goes out the window
+ * too */
+ if (rx_ring->rx_skb_top)
+ dev_kfree_skb_irq(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ goto next_desc;
+ }
+
+#define rxtop (rx_ring->rx_skb_top)
+ if (!(status & E1000_RXD_STAT_EOP)) {
+ /* this descriptor is only the beginning (or middle) */
+ if (!rxtop) {
+ /* this is the beginning of a chain */
+ rxtop = skb;
+ skb_fill_page_desc(rxtop, 0, buffer_info->page,
+ 0, length);
+ } else {
+ /* this is the middle of a chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the skb, only consumed the page */
+ buffer_info->skb = skb;
+ }
+ e1000_consume_page(buffer_info, rxtop, length);
+ goto next_desc;
+ } else {
+ if (rxtop) {
+ /* end of the chain */
+ skb_fill_page_desc(rxtop,
+ skb_shinfo(rxtop)->nr_frags,
+ buffer_info->page, 0, length);
+ /* re-use the current skb, we only consumed the
+ * page */
+ buffer_info->skb = skb;
+ skb = rxtop;
+ rxtop = NULL;
+ e1000_consume_page(buffer_info, skb, length);
+ } else {
+ /* no chain, got EOP, this buf is the packet
+ * copybreak to save the put_page/alloc_page */
+ if (length <= copybreak &&
+ skb_tailroom(skb) >= length) {
+ u8 *vaddr;
+ vaddr = kmap_atomic(buffer_info->page,
+ KM_SKB_DATA_SOFTIRQ);
+ memcpy(skb_tail_pointer(skb), vaddr,
+ length);
+ kunmap_atomic(vaddr,
+ KM_SKB_DATA_SOFTIRQ);
+ /* re-use the page, so don't erase
+ * buffer_info->page */
+ skb_put(skb, length);
+ } else {
+ skb_fill_page_desc(skb, 0,
+ buffer_info->page, 0,
+ length);
+ e1000_consume_page(buffer_info, skb,
+ length);
+ }
+ }
+ }
+
+ /* Receive Checksum Offload XXX recompute due to CRC strip? */
+ e1000_rx_checksum(adapter,
+ (u32)(status) |
+ ((u32)(rx_desc->errors) << 24),
+ le16_to_cpu(rx_desc->csum), skb);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /* eth type trans needs skb->data to point to something */
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ e_err("pskb_may_pull failed.\n");
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ e1000_receive_skb(adapter, netdev, skb, status,
+ rx_desc->special);
+
+next_desc:
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= E1000_RX_BUFFER_WRITE)) {
+ adapter->alloc_rx_buf(adapter, cleaned_count,
+ GFP_ATOMIC);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = e1000_desc_unused(rx_ring);
+ if (cleaned_count)
+ adapter->alloc_rx_buf(adapter, cleaned_count, GFP_ATOMIC);
+
+ adapter->total_rx_bytes += total_rx_bytes;
+ adapter->total_rx_packets += total_rx_packets;
+ return cleaned;
+}
+
+/**
+ * e1000_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ **/
+static void e1000_clean_rx_ring(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info;
+ struct e1000_ps_page *ps_page;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned int i, j;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ if (adapter->clean_rx == e1000_clean_rx_irq)
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ else if (adapter->clean_rx == e1000_clean_jumbo_rx_irq)
+ dma_unmap_page(&pdev->dev, buffer_info->dma,
+ PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ else if (adapter->clean_rx == e1000_clean_rx_irq_ps)
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_ps_bsize0,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+
+ for (j = 0; j < PS_PAGE_BUFFERS; j++) {
+ ps_page = &buffer_info->ps_pages[j];
+ if (!ps_page->page)
+ break;
+ dma_unmap_page(&pdev->dev, ps_page->dma, PAGE_SIZE,
+ DMA_FROM_DEVICE);
+ ps_page->dma = 0;
+ put_page(ps_page->page);
+ ps_page->page = NULL;
+ }
+ }
+
+ /* there also may be some cached data from a chained receive */
+ if (rx_ring->rx_skb_top) {
+ dev_kfree_skb(rx_ring->rx_skb_top);
+ rx_ring->rx_skb_top = NULL;
+ }
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+ adapter->flags2 &= ~FLAG2_IS_DISCARDING;
+
+ writel(0, adapter->hw.hw_addr + rx_ring->head);
+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+static void e1000e_downshift_workaround(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter, downshift_task);
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ e1000e_gig_downshift_workaround_ich8lan(&adapter->hw);
+}
+
+/**
+ * e1000_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ /*
+ * read ICR disables interrupts using IAM
+ */
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
+ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+ (!(er32(STATUS) & E1000_STATUS_LU)))
+ schedule_work(&adapter->downshift_task);
+
+ /*
+ * 80003ES2LAN workaround-- For packet buffer work-around on
+ * link down event; disable receives here in the ISR and reset
+ * adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ adapter->flags & FLAG_RX_NEEDS_RESTART) {
+ /* disable receives */
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl, icr = er32(ICR);
+
+ if (!icr || test_bit(__E1000_DOWN, &adapter->state))
+ return IRQ_NONE; /* Not our interrupt */
+
+ /*
+ * IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt
+ */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ /*
+ * Interrupt Auto-Mask...upon reading ICR,
+ * interrupts are masked. No need for the
+ * IMC write
+ */
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /*
+ * ICH8 workaround-- Call gig speed drop workaround on cable
+ * disconnect (LSC) before accessing any PHY registers
+ */
+ if ((adapter->flags & FLAG_LSC_GIG_SPEED_DROP) &&
+ (!(er32(STATUS) & E1000_STATUS_LU)))
+ schedule_work(&adapter->downshift_task);
+
+ /*
+ * 80003ES2LAN workaround--
+ * For packet buffer work-around on link down event;
+ * disable receives here in the ISR and
+ * reset adapter in watchdog
+ */
+ if (netif_carrier_ok(netdev) &&
+ (adapter->flags & FLAG_RX_NEEDS_RESTART)) {
+ /* disable receives */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ adapter->flags |= FLAG_RX_RESTART_NOW;
+ }
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_msix_other(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ if (!(icr & E1000_ICR_INT_ASSERTED)) {
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ ew32(IMS, E1000_IMS_OTHER);
+ return IRQ_NONE;
+ }
+
+ if (icr & adapter->eiac_mask)
+ ew32(ICS, (icr & adapter->eiac_mask));
+
+ if (icr & E1000_ICR_OTHER) {
+ if (!(icr & E1000_ICR_LSC))
+ goto no_link_interrupt;
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+no_link_interrupt:
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ ew32(IMS, E1000_IMS_LSC | E1000_IMS_OTHER);
+
+ return IRQ_HANDLED;
+}
+
+
+static irqreturn_t e1000_intr_msix_tx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+
+
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+
+ if (!e1000_clean_tx_irq(adapter))
+ /* Ring was not completely cleaned, so fire another interrupt */
+ ew32(ICS, tx_ring->ims_val);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t e1000_intr_msix_rx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->rx_ring->set_itr) {
+ writel(1000000000 / (adapter->rx_ring->itr_val * 256),
+ adapter->hw.hw_addr + adapter->rx_ring->itr_register);
+ adapter->rx_ring->set_itr = 0;
+ }
+
+ if (napi_schedule_prep(&adapter->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->napi);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_configure_msix - Configure MSI-X hardware
+ *
+ * e1000_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void e1000_configure_msix(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ int vector = 0;
+ u32 ctrl_ext, ivar = 0;
+
+ adapter->eiac_mask = 0;
+
+ /* Workaround issue with spurious interrupts on 82574 in MSI-X mode */
+ if (hw->mac.type == e1000_82574) {
+ u32 rfctl = er32(RFCTL);
+ rfctl |= E1000_RFCTL_ACK_DIS;
+ ew32(RFCTL, rfctl);
+ }
+
+#define E1000_IVAR_INT_ALLOC_VALID 0x8
+ /* Configure Rx vector */
+ rx_ring->ims_val = E1000_IMS_RXQ0;
+ adapter->eiac_mask |= rx_ring->ims_val;
+ if (rx_ring->itr_val)
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ hw->hw_addr + rx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + rx_ring->itr_register);
+ ivar = E1000_IVAR_INT_ALLOC_VALID | vector;
+
+ /* Configure Tx vector */
+ tx_ring->ims_val = E1000_IMS_TXQ0;
+ vector++;
+ if (tx_ring->itr_val)
+ writel(1000000000 / (tx_ring->itr_val * 256),
+ hw->hw_addr + tx_ring->itr_register);
+ else
+ writel(1, hw->hw_addr + tx_ring->itr_register);
+ adapter->eiac_mask |= tx_ring->ims_val;
+ ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 8);
+
+ /* set vector for Other Causes, e.g. link changes */
+ vector++;
+ ivar |= ((E1000_IVAR_INT_ALLOC_VALID | vector) << 16);
+ if (rx_ring->itr_val)
+ writel(1000000000 / (rx_ring->itr_val * 256),
+ hw->hw_addr + E1000_EITR_82574(vector));
+ else
+ writel(1, hw->hw_addr + E1000_EITR_82574(vector));
+
+ /* Cause Tx interrupts on every write back */
+ ivar |= (1 << 31);
+
+ ew32(IVAR, ivar);
+
+ /* enable MSI-X PBA support */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask Other interrupts upon ICR read */
+#define E1000_EIAC_MASK_82574 0x01F00000
+ ew32(IAM, ~E1000_EIAC_MASK_82574 | E1000_IMS_OTHER);
+ ctrl_ext |= E1000_CTRL_EXT_EIAME;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+}
+
+void e1000e_reset_interrupt_capability(struct e1000_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & FLAG_MSI_ENABLED) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~FLAG_MSI_ENABLED;
+ }
+}
+
+/**
+ * e1000e_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+void e1000e_set_interrupt_capability(struct e1000_adapter *adapter)
+{
+ int err;
+ int i;
+
+ switch (adapter->int_mode) {
+ case E1000E_INT_MODE_MSIX:
+ if (adapter->flags & FLAG_HAS_MSIX) {
+ adapter->num_vectors = 3; /* RxQ0, TxQ0 and other */
+ adapter->msix_entries = kcalloc(adapter->num_vectors,
+ sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (adapter->msix_entries) {
+ for (i = 0; i < adapter->num_vectors; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries,
+ adapter->num_vectors);
+ if (err == 0)
+ return;
+ }
+ /* MSI-X failed, so fall through and try MSI */
+ e_err("Failed to initialize MSI-X interrupts. "
+ "Falling back to MSI interrupts.\n");
+ e1000e_reset_interrupt_capability(adapter);
+ }
+ adapter->int_mode = E1000E_INT_MODE_MSI;
+ /* Fall through */
+ case E1000E_INT_MODE_MSI:
+ if (!pci_enable_msi(adapter->pdev)) {
+ adapter->flags |= FLAG_MSI_ENABLED;
+ } else {
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ e_err("Failed to initialize MSI interrupts. Falling "
+ "back to legacy interrupts.\n");
+ }
+ /* Fall through */
+ case E1000E_INT_MODE_LEGACY:
+ /* Don't do anything; this is the system default */
+ break;
+ }
+
+ /* store the number of vectors being used */
+ adapter->num_vectors = 1;
+}
+
+/**
+ * e1000_request_msix - Initialize MSI-X interrupts
+ *
+ * e1000_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int e1000_request_msix(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0, vector = 0;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+ snprintf(adapter->rx_ring->name,
+ sizeof(adapter->rx_ring->name) - 1,
+ "%s-rx-0", netdev->name);
+ else
+ memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ e1000_intr_msix_rx, 0, adapter->rx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+ adapter->rx_ring->itr_register = E1000_EITR_82574(vector);
+ adapter->rx_ring->itr_val = adapter->itr;
+ vector++;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5))
+ snprintf(adapter->tx_ring->name,
+ sizeof(adapter->tx_ring->name) - 1,
+ "%s-tx-0", netdev->name);
+ else
+ memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ e1000_intr_msix_tx, 0, adapter->tx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+ adapter->tx_ring->itr_register = E1000_EITR_82574(vector);
+ adapter->tx_ring->itr_val = adapter->itr;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ e1000_msix_other, 0, netdev->name, netdev);
+ if (err)
+ goto out;
+
+ e1000_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
+/**
+ * e1000_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int e1000_request_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err;
+
+ if (adapter->msix_entries) {
+ err = e1000_request_msix(adapter);
+ if (!err)
+ return err;
+ /* fall back to MSI */
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_MSI;
+ e1000e_set_interrupt_capability(adapter);
+ }
+ if (adapter->flags & FLAG_MSI_ENABLED) {
+ err = request_irq(adapter->pdev->irq, e1000_intr_msi, 0,
+ netdev->name, netdev);
+ if (!err)
+ return err;
+
+ /* fall back to legacy interrupt */
+ e1000e_reset_interrupt_capability(adapter);
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ }
+
+ err = request_irq(adapter->pdev->irq, e1000_intr, IRQF_SHARED,
+ netdev->name, netdev);
+ if (err)
+ e_err("Unable to allocate interrupt, Error: %d\n", err);
+
+ return err;
+}
+
+static void e1000_free_irq(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ if (adapter->msix_entries) {
+ int vector = 0;
+
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ vector++;
+
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ vector++;
+
+ /* Other Causes interrupt vector */
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ return;
+ }
+
+ free_irq(adapter->pdev->irq, netdev);
+}
+
+/**
+ * e1000_irq_disable - Mask off interrupt generation on the NIC
+ **/
+static void e1000_irq_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(IMC, ~0);
+ if (adapter->msix_entries)
+ ew32(EIAC_82574, 0);
+ e1e_flush();
+
+ if (adapter->msix_entries) {
+ int i;
+ for (i = 0; i < adapter->num_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * e1000_irq_enable - Enable default interrupt generation settings
+ **/
+static void e1000_irq_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->msix_entries) {
+ ew32(EIAC_82574, adapter->eiac_mask & E1000_EIAC_MASK_82574);
+ ew32(IMS, adapter->eiac_mask | E1000_IMS_OTHER | E1000_IMS_LSC);
+ } else {
+ ew32(IMS, IMS_ENABLE_MASK);
+ }
+ e1e_flush();
+}
+
+/**
+ * e1000e_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * e1000e_get_hw_control sets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded. For AMT version (only with 82573)
+ * of the f/w this means that the network i/f is open.
+ **/
+void e1000e_get_hw_control(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+ u32 swsm;
+
+ /* Let firmware know the driver has taken over */
+ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_DRV_LOAD);
+ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+ }
+}
+
+/**
+ * e1000e_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * e1000e_release_hw_control resets {CTRL_EXT|SWSM}:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded. For AMT version (only with 82573) i
+ * of the f/w this means that the network i/f is closed.
+ *
+ **/
+void e1000e_release_hw_control(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+ u32 swsm;
+
+ /* Let firmware taken over control of h/w */
+ if (adapter->flags & FLAG_HAS_SWSM_ON_LOAD) {
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm & ~E1000_SWSM_DRV_LOAD);
+ } else if (adapter->flags & FLAG_HAS_CTRLEXT_ON_LOAD) {
+ ctrl_ext = er32(CTRL_EXT);
+ ew32(CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+ }
+}
+
+/**
+ * @e1000_alloc_ring - allocate memory for a ring structure
+ **/
+static int e1000_alloc_ring_dma(struct e1000_adapter *adapter,
+ struct e1000_ring *ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ ring->desc = dma_alloc_coherent(&pdev->dev, ring->size, &ring->dma,
+ GFP_KERNEL);
+ if (!ring->desc)
+ return -ENOMEM;
+
+ return 0;
+}
+
+/**
+ * e1000e_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+int e1000e_setup_tx_resources(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ int err = -ENOMEM, size;
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ tx_ring->buffer_info = vzalloc(size);
+ if (!tx_ring->buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(struct e1000_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ err = e1000_alloc_ring_dma(adapter, tx_ring);
+ if (err)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+err:
+ vfree(tx_ring->buffer_info);
+ e_err("Unable to allocate memory for the transmit descriptor ring\n");
+ return err;
+}
+
+/**
+ * e1000e_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int e1000e_setup_rx_resources(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ struct e1000_buffer *buffer_info;
+ int i, size, desc_len, err = -ENOMEM;
+
+ size = sizeof(struct e1000_buffer) * rx_ring->count;
+ rx_ring->buffer_info = vzalloc(size);
+ if (!rx_ring->buffer_info)
+ goto err;
+
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ buffer_info->ps_pages = kcalloc(PS_PAGE_BUFFERS,
+ sizeof(struct e1000_ps_page),
+ GFP_KERNEL);
+ if (!buffer_info->ps_pages)
+ goto err_pages;
+ }
+
+ desc_len = sizeof(union e1000_rx_desc_packet_split);
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * desc_len;
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ err = e1000_alloc_ring_dma(adapter, rx_ring);
+ if (err)
+ goto err_pages;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+ rx_ring->rx_skb_top = NULL;
+
+ return 0;
+
+err_pages:
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ kfree(buffer_info->ps_pages);
+ }
+err:
+ vfree(rx_ring->buffer_info);
+ e_err("Unable to allocate memory for the receive descriptor ring\n");
+ return err;
+}
+
+/**
+ * e1000_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ **/
+static void e1000_clean_tx_ring(struct e1000_adapter *adapter)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_put_txbuf(adapter, buffer_info);
+ }
+
+ size = sizeof(struct e1000_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ writel(0, adapter->hw.hw_addr + tx_ring->head);
+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * e1000e_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+void e1000e_free_tx_resources(struct e1000_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+
+ e1000_clean_tx_ring(adapter);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+ tx_ring->desc = NULL;
+}
+
+/**
+ * e1000e_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void e1000e_free_rx_resources(struct e1000_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ int i;
+
+ e1000_clean_rx_ring(adapter);
+
+ for (i = 0; i < rx_ring->count; i++)
+ kfree(rx_ring->buffer_info[i].ps_pages);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+ rx_ring->desc = NULL;
+}
+
+/**
+ * e1000_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput. This functionality is controlled
+ * by the InterruptThrottleRate module parameter.
+ **/
+static unsigned int e1000_update_itr(struct e1000_adapter *adapter,
+ u16 itr_setting, int packets,
+ int bytes)
+{
+ unsigned int retval = itr_setting;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ retval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ retval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void e1000_set_itr(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ if (adapter->flags2 & FLAG2_DISABLE_AIM) {
+ new_itr = 0;
+ goto set_itr_now;
+ }
+
+ adapter->tx_itr = e1000_update_itr(adapter,
+ adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = e1000_update_itr(adapter,
+ adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ if (new_itr != adapter->itr) {
+ /*
+ * this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ adapter->rx_ring->itr_val = new_itr;
+ if (adapter->msix_entries)
+ adapter->rx_ring->set_itr = 1;
+ else
+ if (new_itr)
+ ew32(ITR, 1000000000 / (new_itr * 256));
+ else
+ ew32(ITR, 0);
+ }
+}
+
+/**
+ * e1000_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ **/
+static int __devinit e1000_alloc_queues(struct e1000_adapter *adapter)
+{
+ adapter->tx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ goto err;
+
+ adapter->rx_ring = kzalloc(sizeof(struct e1000_ring), GFP_KERNEL);
+ if (!adapter->rx_ring)
+ goto err;
+
+ return 0;
+err:
+ e_err("Unable to allocate memory for queues\n");
+ kfree(adapter->rx_ring);
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+}
+
+/**
+ * e1000_clean - NAPI Rx polling callback
+ * @napi: struct associated with this polling callback
+ * @budget: amount of packets driver is allowed to process this poll
+ **/
+static int e1000_clean(struct napi_struct *napi, int budget)
+{
+ struct e1000_adapter *adapter = container_of(napi, struct e1000_adapter, napi);
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *poll_dev = adapter->netdev;
+ int tx_cleaned = 1, work_done = 0;
+
+ adapter = netdev_priv(poll_dev);
+
+ if (adapter->msix_entries &&
+ !(adapter->rx_ring->ims_val & adapter->tx_ring->ims_val))
+ goto clean_rx;
+
+ tx_cleaned = e1000_clean_tx_irq(adapter);
+
+clean_rx:
+ adapter->clean_rx(adapter, &work_done, budget);
+
+ if (!tx_cleaned)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ if (adapter->itr_setting & 3)
+ e1000_set_itr(adapter);
+ napi_complete(napi);
+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
+ if (adapter->msix_entries)
+ ew32(IMS, adapter->rx_ring->ims_val);
+ else
+ e1000_irq_enable(adapter);
+ }
+ }
+
+ return work_done;
+}
+
+static void e1000_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ /* don't update vlan cookie if already programmed */
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ (vid == adapter->mng_vlan_id))
+ return;
+
+ /* add VID to filter table */
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ hw->mac.ops.write_vfta(hw, index, vfta);
+ }
+
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void e1000_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vfta, index;
+
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
+ (vid == adapter->mng_vlan_id)) {
+ /* release control to f/w */
+ e1000e_release_hw_control(adapter);
+ return;
+ }
+
+ /* remove VID from filter table */
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ index = (vid >> 5) & 0x7F;
+ vfta = E1000_READ_REG_ARRAY(hw, E1000_VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ hw->mac.ops.write_vfta(hw, index, vfta);
+ }
+
+ clear_bit(vid, adapter->active_vlans);
+}
+
+/**
+ * e1000e_vlan_filter_disable - helper to disable hw VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_disable(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* disable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl &= ~(E1000_RCTL_VFE | E1000_RCTL_CFIEN);
+ ew32(RCTL, rctl);
+
+ if (adapter->mng_vlan_id != (u16)E1000_MNG_VLAN_NONE) {
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ }
+ }
+}
+
+/**
+ * e1000e_vlan_filter_enable - helper to enable HW VLAN filtering
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_filter_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER) {
+ /* enable VLAN receive filtering */
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_VFE;
+ rctl &= ~E1000_RCTL_CFIEN;
+ ew32(RCTL, rctl);
+ }
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to disable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_disable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl;
+
+ /* disable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+}
+
+/**
+ * e1000e_vlan_strip_enable - helper to enable HW VLAN stripping
+ * @adapter: board private structure to initialize
+ **/
+static void e1000e_vlan_strip_enable(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl;
+
+ /* enable VLAN tag insert/strip */
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_VME;
+ ew32(CTRL, ctrl);
+}
+
+static void e1000_update_mng_vlan(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ e1000_vlan_rx_add_vid(netdev, vid);
+ adapter->mng_vlan_id = vid;
+ }
+
+ if ((old_vid != (u16)E1000_MNG_VLAN_NONE) && (vid != old_vid))
+ e1000_vlan_rx_kill_vid(netdev, old_vid);
+}
+
+static void e1000_restore_vlan(struct e1000_adapter *adapter)
+{
+ u16 vid;
+
+ e1000_vlan_rx_add_vid(adapter->netdev, 0);
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ e1000_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 manc, manc2h, mdef, i, j;
+
+ if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
+ return;
+
+ manc = er32(MANC);
+
+ /*
+ * enable receiving management packets to the host. this will probably
+ * generate destination unreachable messages from the host OS, but
+ * the packets will be handled on SMBUS
+ */
+ manc |= E1000_MANC_EN_MNG2HOST;
+ manc2h = er32(MANC2H);
+
+ switch (hw->mac.type) {
+ default:
+ manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ /*
+ * Check if IPMI pass-through decision filter already exists;
+ * if so, enable it.
+ */
+ for (i = 0, j = 0; i < 8; i++) {
+ mdef = er32(MDEF(i));
+
+ /* Ignore filters with anything other than IPMI ports */
+ if (mdef & ~(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+ continue;
+
+ /* Enable this decision filter in MANC2H */
+ if (mdef)
+ manc2h |= (1 << i);
+
+ j |= mdef;
+ }
+
+ if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
+ break;
+
+ /* Create new decision filter in an empty filter */
+ for (i = 0, j = 0; i < 8; i++)
+ if (er32(MDEF(i)) == 0) {
+ ew32(MDEF(i), (E1000_MDEF_PORT_623 |
+ E1000_MDEF_PORT_664));
+ manc2h |= (1 << 1);
+ j++;
+ break;
+ }
+
+ if (!j)
+ e_warn("Unable to create IPMI pass-through filter\n");
+ break;
+ }
+
+ ew32(MANC2H, manc2h);
+ ew32(MANC, manc);
+}
+
+/**
+ * e1000_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void e1000_configure_tx(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ u64 tdba;
+ u32 tdlen, tctl, tipg, tarc;
+ u32 ipgr1, ipgr2;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ tdba = tx_ring->dma;
+ tdlen = tx_ring->count * sizeof(struct e1000_tx_desc);
+ ew32(TDBAL, (tdba & DMA_BIT_MASK(32)));
+ ew32(TDBAH, (tdba >> 32));
+ ew32(TDLEN, tdlen);
+ ew32(TDH, 0);
+ ew32(TDT, 0);
+ tx_ring->head = E1000_TDH;
+ tx_ring->tail = E1000_TDT;
+
+ /* Set the default values for the Tx Inter Packet Gap timer */
+ tipg = DEFAULT_82543_TIPG_IPGT_COPPER; /* 8 */
+ ipgr1 = DEFAULT_82543_TIPG_IPGR1; /* 8 */
+ ipgr2 = DEFAULT_82543_TIPG_IPGR2; /* 6 */
+
+ if (adapter->flags & FLAG_TIPG_MEDIUM_FOR_80003ESLAN)
+ ipgr2 = DEFAULT_80003ES2LAN_TIPG_IPGR2; /* 7 */
+
+ tipg |= ipgr1 << E1000_TIPG_IPGR1_SHIFT;
+ tipg |= ipgr2 << E1000_TIPG_IPGR2_SHIFT;
+ ew32(TIPG, tipg);
+
+ /* Set the Tx Interrupt Delay register */
+ ew32(TIDV, adapter->tx_int_delay);
+ /* Tx irq moderation */
+ ew32(TADV, adapter->tx_abs_int_delay);
+
+ if (adapter->flags2 & FLAG2_DMA_BURST) {
+ u32 txdctl = er32(TXDCTL(0));
+ txdctl &= ~(E1000_TXDCTL_PTHRESH | E1000_TXDCTL_HTHRESH |
+ E1000_TXDCTL_WTHRESH);
+ /*
+ * set up some performance related parameters to encourage the
+ * hardware to use the bus more efficiently in bursts, depends
+ * on the tx_int_delay to be enabled,
+ * wthresh = 5 ==> burst write a cacheline (64 bytes) at a time
+ * hthresh = 1 ==> prefetch when one or more available
+ * pthresh = 0x1f ==> prefetch if internal cache 31 or less
+ * BEWARE: this seems to work but should be considered first if
+ * there are Tx hangs or other Tx related bugs
+ */
+ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE;
+ ew32(TXDCTL(0), txdctl);
+ /* erratum work around: set txdctl the same for both queues */
+ ew32(TXDCTL(1), txdctl);
+ }
+
+ /* Program the Transmit Control Register */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ if (adapter->flags & FLAG_TARC_SPEED_MODE_BIT) {
+ tarc = er32(TARC(0));
+ /*
+ * set the speed mode bit, we'll clear it if we're not at
+ * gigabit link later
+ */
+#define SPEED_MODE_BIT (1 << 21)
+ tarc |= SPEED_MODE_BIT;
+ ew32(TARC(0), tarc);
+ }
+
+ /* errata: program both queues to unweighted RR */
+ if (adapter->flags & FLAG_TARC_SET_BIT_ZERO) {
+ tarc = er32(TARC(0));
+ tarc |= 1;
+ ew32(TARC(0), tarc);
+ tarc = er32(TARC(1));
+ tarc |= 1;
+ ew32(TARC(1), tarc);
+ }
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_IFCS;
+
+ /* only set IDE if we are delaying interrupts using the timers */
+ if (adapter->tx_int_delay)
+ adapter->txd_cmd |= E1000_TXD_CMD_IDE;
+
+ /* enable Report Status bit */
+ adapter->txd_cmd |= E1000_TXD_CMD_RS;
+
+ ew32(TCTL, tctl);
+
+ e1000e_config_collision_dist(hw);
+}
+
+/**
+ * e1000_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+#define PAGE_USE_COUNT(S) (((S) >> PAGE_SHIFT) + \
+ (((S) & (PAGE_SIZE - 1)) ? 1 : 0))
+static void e1000_setup_rctl(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl, rfctl;
+ u32 pages = 0;
+
+ /* Workaround Si errata on 82579 - configure jumbo frame flow */
+ if (hw->mac.type == e1000_pch2lan) {
+ s32 ret_val;
+
+ if (adapter->netdev->mtu > ETH_DATA_LEN)
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true);
+ else
+ ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false);
+
+ if (ret_val)
+ e_dbg("failed to enable jumbo frame workaround mode\n");
+ }
+
+ /* Program MC offset vector base */
+ rctl = er32(RCTL);
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM |
+ E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+ (adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /* Do not Store bad packets */
+ rctl &= ~E1000_RCTL_SBP;
+
+ /* Enable Long Packet receive */
+ if (adapter->netdev->mtu <= ETH_DATA_LEN)
+ rctl &= ~E1000_RCTL_LPE;
+ else
+ rctl |= E1000_RCTL_LPE;
+
+ /* Some systems expect that the CRC is included in SMBUS traffic. The
+ * hardware strips the CRC before sending to both SMBUS (BMC) and to
+ * host memory when this is enabled
+ */
+ if (adapter->flags2 & FLAG2_CRC_STRIPPING)
+ rctl |= E1000_RCTL_SECRC;
+
+ /* Workaround Si errata on 82577 PHY - configure IPG for jumbos */
+ if ((hw->phy.type == e1000_phy_82577) && (rctl & E1000_RCTL_LPE)) {
+ u16 phy_data;
+
+ e1e_rphy(hw, PHY_REG(770, 26), &phy_data);
+ phy_data &= 0xfff8;
+ phy_data |= (1 << 2);
+ e1e_wphy(hw, PHY_REG(770, 26), phy_data);
+
+ e1e_rphy(hw, 22, &phy_data);
+ phy_data &= 0x0fff;
+ phy_data |= (1 << 14);
+ e1e_wphy(hw, 0x10, 0x2823);
+ e1e_wphy(hw, 0x11, 0x0003);
+ e1e_wphy(hw, 22, phy_data);
+ }
+
+ /* Setup buffer sizes */
+ rctl &= ~E1000_RCTL_SZ_4096;
+ rctl |= E1000_RCTL_BSEX;
+ switch (adapter->rx_buffer_len) {
+ case 2048:
+ default:
+ rctl |= E1000_RCTL_SZ_2048;
+ rctl &= ~E1000_RCTL_BSEX;
+ break;
+ case 4096:
+ rctl |= E1000_RCTL_SZ_4096;
+ break;
+ case 8192:
+ rctl |= E1000_RCTL_SZ_8192;
+ break;
+ case 16384:
+ rctl |= E1000_RCTL_SZ_16384;
+ break;
+ }
+
+ /*
+ * 82571 and greater support packet-split where the protocol
+ * header is placed in skb->data and the packet data is
+ * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
+ * In the case of a non-split, skb->data is linearly filled,
+ * followed by the page buffers. Therefore, skb->data is
+ * sized to hold the largest protocol header.
+ *
+ * allocations using alloc_page take too long for regular MTU
+ * so only enable packet split for jumbo frames
+ *
+ * Using pages when the page size is greater than 16k wastes
+ * a lot of memory, since we allocate 3 pages at all times
+ * per packet.
+ */
+ pages = PAGE_USE_COUNT(adapter->netdev->mtu);
+ if (!(adapter->flags & FLAG_HAS_ERT) && (pages <= 3) &&
+ (PAGE_SIZE <= 16384) && (rctl & E1000_RCTL_LPE))
+ adapter->rx_ps_pages = pages;
+ else
+ adapter->rx_ps_pages = 0;
+
+ if (adapter->rx_ps_pages) {
+ u32 psrctl = 0;
+
+ /* Configure extra packet-split registers */
+ rfctl = er32(RFCTL);
+ rfctl |= E1000_RFCTL_EXTEN;
+ /*
+ * disable packet split support for IPv6 extension headers,
+ * because some malformed IPv6 headers can hang the Rx
+ */
+ rfctl |= (E1000_RFCTL_IPV6_EX_DIS |
+ E1000_RFCTL_NEW_IPV6_EXT_DIS);
+
+ ew32(RFCTL, rfctl);
+
+ /* Enable Packet split descriptors */
+ rctl |= E1000_RCTL_DTYP_PS;
+
+ psrctl |= adapter->rx_ps_bsize0 >>
+ E1000_PSRCTL_BSIZE0_SHIFT;
+
+ switch (adapter->rx_ps_pages) {
+ case 3:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE3_SHIFT;
+ case 2:
+ psrctl |= PAGE_SIZE <<
+ E1000_PSRCTL_BSIZE2_SHIFT;
+ case 1:
+ psrctl |= PAGE_SIZE >>
+ E1000_PSRCTL_BSIZE1_SHIFT;
+ break;
+ }
+
+ ew32(PSRCTL, psrctl);
+ }
+
+ ew32(RCTL, rctl);
+ /* just started the receive unit, no need to restart */
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
+}
+
+/**
+ * e1000_configure_rx - Configure Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void e1000_configure_rx(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_ring *rx_ring = adapter->rx_ring;
+ u64 rdba;
+ u32 rdlen, rctl, rxcsum, ctrl_ext;
+
+ if (adapter->rx_ps_pages) {
+ /* this is a 32 byte descriptor */
+ rdlen = rx_ring->count *
+ sizeof(union e1000_rx_desc_packet_split);
+ adapter->clean_rx = e1000_clean_rx_irq_ps;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps;
+ } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_jumbo_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_jumbo_rx_buffers;
+ } else {
+ rdlen = rx_ring->count * sizeof(struct e1000_rx_desc);
+ adapter->clean_rx = e1000_clean_rx_irq;
+ adapter->alloc_rx_buf = e1000_alloc_rx_buffers;
+ }
+
+ /* disable receives while setting up the descriptors */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ if (adapter->flags2 & FLAG2_DMA_BURST) {
+ /*
+ * set the writeback threshold (only takes effect if the RDTR
+ * is set). set GRAN=1 and write back up to 0x4 worth, and
+ * enable prefetching of 0x20 Rx descriptors
+ * granularity = 01
+ * wthresh = 04,
+ * hthresh = 04,
+ * pthresh = 0x20
+ */
+ ew32(RXDCTL(0), E1000_RXDCTL_DMA_BURST_ENABLE);
+ ew32(RXDCTL(1), E1000_RXDCTL_DMA_BURST_ENABLE);
+
+ /*
+ * override the delay timers for enabling bursting, only if
+ * the value was not set by the user via module options
+ */
+ if (adapter->rx_int_delay == DEFAULT_RDTR)
+ adapter->rx_int_delay = BURST_RDTR;
+ if (adapter->rx_abs_int_delay == DEFAULT_RADV)
+ adapter->rx_abs_int_delay = BURST_RADV;
+ }
+
+ /* set the Receive Delay Timer Register */
+ ew32(RDTR, adapter->rx_int_delay);
+
+ /* irq moderation */
+ ew32(RADV, adapter->rx_abs_int_delay);
+ if ((adapter->itr_setting != 0) && (adapter->itr != 0))
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+
+ ctrl_ext = er32(CTRL_EXT);
+ /* Auto-Mask interrupts upon ICR access */
+ ctrl_ext |= E1000_CTRL_EXT_IAME;
+ ew32(IAM, 0xffffffff);
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ rdba = rx_ring->dma;
+ ew32(RDBAL, (rdba & DMA_BIT_MASK(32)));
+ ew32(RDBAH, (rdba >> 32));
+ ew32(RDLEN, rdlen);
+ ew32(RDH, 0);
+ ew32(RDT, 0);
+ rx_ring->head = E1000_RDH;
+ rx_ring->tail = E1000_RDT;
+
+ /* Enable Receive Checksum Offload for TCP and UDP */
+ rxcsum = er32(RXCSUM);
+ if (adapter->flags & FLAG_RX_CSUM_ENABLED) {
+ rxcsum |= E1000_RXCSUM_TUOFL;
+
+ /*
+ * IPv4 payload checksum for UDP fragments must be
+ * used in conjunction with packet-split.
+ */
+ if (adapter->rx_ps_pages)
+ rxcsum |= E1000_RXCSUM_IPPCSE;
+ } else {
+ rxcsum &= ~E1000_RXCSUM_TUOFL;
+ /* no need to clear IPPCSE as it defaults to 0 */
+ }
+ ew32(RXCSUM, rxcsum);
+
+ /*
+ * Enable early receives on supported devices, only takes effect when
+ * packet size is equal or larger than the specified value (in 8 byte
+ * units), e.g. using jumbo frames when setting to E1000_ERT_2048
+ */
+ if ((adapter->flags & FLAG_HAS_ERT) ||
+ (adapter->hw.mac.type == e1000_pch2lan)) {
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ u32 rxdctl = er32(RXDCTL(0));
+ ew32(RXDCTL(0), rxdctl | 0x3);
+ if (adapter->flags & FLAG_HAS_ERT)
+ ew32(ERT, E1000_ERT_2048 | (1 << 13));
+ /*
+ * With jumbo frames and early-receive enabled,
+ * excessive C-state transition latencies result in
+ * dropped transactions.
+ */
+ pm_qos_update_request(&adapter->netdev->pm_qos_req, 55);
+ } else {
+ pm_qos_update_request(&adapter->netdev->pm_qos_req,
+ PM_QOS_DEFAULT_VALUE);
+ }
+ }
+
+ /* Enable Receives */
+ ew32(RCTL, rctl);
+}
+
+/**
+ * e1000_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates the Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+static void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list,
+ u32 mc_addr_count)
+{
+ hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, mc_addr_count);
+}
+
+/**
+ * e1000_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void e1000_set_multi(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ u32 rctl;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = er32(RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ rctl &= ~E1000_RCTL_VFE;
+ /* Do not hardware filter VLANs in promisc mode */
+ e1000e_vlan_filter_disable(adapter);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ rctl &= ~E1000_RCTL_UPE;
+ } else {
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE);
+ }
+ e1000e_vlan_filter_enable(adapter);
+ }
+
+ ew32(RCTL, rctl);
+
+ if (!netdev_mc_empty(netdev)) {
+ int i = 0;
+
+ mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return;
+
+ /* prepare a packed array of only addresses. */
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ e1000_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+ } else {
+ /*
+ * if we're called from probe, we might not have
+ * anything to do here, so clear out the list
+ */
+ e1000_update_mc_addr_list(hw, NULL, 0);
+ }
+
+ if (netdev->features & NETIF_F_HW_VLAN_RX)
+ e1000e_vlan_strip_enable(adapter);
+ else
+ e1000e_vlan_strip_disable(adapter);
+}
+
+/**
+ * e1000_configure - configure the hardware for Rx and Tx
+ * @adapter: private board structure
+ **/
+static void e1000_configure(struct e1000_adapter *adapter)
+{
+ e1000_set_multi(adapter->netdev);
+
+ e1000_restore_vlan(adapter);
+ e1000_init_manageability_pt(adapter);
+
+ e1000_configure_tx(adapter);
+ e1000_setup_rctl(adapter);
+ e1000_configure_rx(adapter);
+ adapter->alloc_rx_buf(adapter, e1000_desc_unused(adapter->rx_ring),
+ GFP_KERNEL);
+}
+
+/**
+ * e1000e_power_up_phy - restore link in case the phy was powered down
+ * @adapter: address of board private structure
+ *
+ * The phy may be powered down to save power and turn off link when the
+ * driver is unloaded and wake on lan is not enabled (among others)
+ * *** this routine MUST be followed by a call to e1000e_reset ***
+ **/
+void e1000e_power_up_phy(struct e1000_adapter *adapter)
+{
+ if (adapter->hw.phy.ops.power_up)
+ adapter->hw.phy.ops.power_up(&adapter->hw);
+
+ adapter->hw.mac.ops.setup_link(&adapter->hw);
+}
+
+/**
+ * e1000_power_down_phy - Power down the PHY
+ *
+ * Power down the PHY so no link is implied when interface is down.
+ * The PHY cannot be powered down if management or WoL is active.
+ */
+static void e1000_power_down_phy(struct e1000_adapter *adapter)
+{
+ /* WoL is enabled */
+ if (adapter->wol)
+ return;
+
+ if (adapter->hw.phy.ops.power_down)
+ adapter->hw.phy.ops.power_down(&adapter->hw);
+}
+
+/**
+ * e1000e_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * require a configuration cycle of the hardware - those cannot be
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
+void e1000e_reset(struct e1000_adapter *adapter)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_fc_info *fc = &adapter->hw.fc;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tx_space, min_tx_space, min_rx_space;
+ u32 pba = adapter->pba;
+ u16 hwm;
+
+ /* reset Packet Buffer Allocation to default */
+ ew32(PBA, pba);
+
+ if (adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) {
+ /*
+ * To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB.
+ */
+ pba = er32(PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /*
+ * the Tx fifo also stores 16 bytes of information about the Tx
+ * but don't include ethernet FCS because hardware appends it
+ */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(struct e1000_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /*
+ * If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation
+ */
+ if ((tx_space < min_tx_space) &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba -= min_tx_space - tx_space;
+
+ /*
+ * if short on Rx space, Rx wins and must trump Tx
+ * adjustment or use Early Receive if available
+ */
+ if ((pba < min_rx_space) &&
+ (!(adapter->flags & FLAG_HAS_ERT)))
+ /* ERT enabled in e1000_configure_rx */
+ pba = min_rx_space;
+ }
+
+ ew32(PBA, pba);
+ }
+
+ /*
+ * flow control settings
+ *
+ * The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, and
+ * - the full Rx FIFO size minus the early receive size (for parts
+ * with ERT support assuming ERT set to E1000_ERT_2048), or
+ * - the full Rx FIFO size minus one full frame
+ */
+ if (adapter->flags & FLAG_DISABLE_FC_PAUSE_TIME)
+ fc->pause_time = 0xFFFF;
+ else
+ fc->pause_time = E1000_FC_PAUSE_TIME;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ switch (hw->mac.type) {
+ default:
+ if ((adapter->flags & FLAG_HAS_ERT) &&
+ (adapter->netdev->mtu > ETH_DATA_LEN))
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - (E1000_ERT_2048 << 3)));
+ else
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - adapter->max_frame_size));
+
+ fc->high_water = hwm & E1000_FCRTH_RTH; /* 8-byte granularity */
+ fc->low_water = fc->high_water - 8;
+ break;
+ case e1000_pchlan:
+ /*
+ * Workaround PCH LOM adapter hangs with certain network
+ * loads. If hangs persist, try disabling Tx flow control.
+ */
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ fc->high_water = 0x3500;
+ fc->low_water = 0x1500;
+ } else {
+ fc->high_water = 0x5000;
+ fc->low_water = 0x3000;
+ }
+ fc->refresh_time = 0x1000;
+ break;
+ case e1000_pch2lan:
+ fc->high_water = 0x05C20;
+ fc->low_water = 0x05048;
+ fc->pause_time = 0x0650;
+ fc->refresh_time = 0x0400;
+ if (adapter->netdev->mtu > ETH_DATA_LEN) {
+ pba = 14;
+ ew32(PBA, pba);
+ }
+ break;
+ }
+
+ /*
+ * Disable Adaptive Interrupt Moderation if 2 full packets cannot
+ * fit in receive buffer and early-receive not supported.
+ */
+ if (adapter->itr_setting & 0x3) {
+ if (((adapter->max_frame_size * 2) > (pba << 10)) &&
+ !(adapter->flags & FLAG_HAS_ERT)) {
+ if (!(adapter->flags2 & FLAG2_DISABLE_AIM)) {
+ dev_info(&adapter->pdev->dev,
+ "Interrupt Throttle Rate turned off\n");
+ adapter->flags2 |= FLAG2_DISABLE_AIM;
+ ew32(ITR, 0);
+ }
+ } else if (adapter->flags2 & FLAG2_DISABLE_AIM) {
+ dev_info(&adapter->pdev->dev,
+ "Interrupt Throttle Rate turned on\n");
+ adapter->flags2 &= ~FLAG2_DISABLE_AIM;
+ adapter->itr = 20000;
+ ew32(ITR, 1000000000 / (adapter->itr * 256));
+ }
+ }
+
+ /* Allow time for pending master requests to run */
+ mac->ops.reset_hw(hw);
+
+ /*
+ * For parts with AMT enabled, let the firmware know
+ * that the network interface is in control
+ */
+ if (adapter->flags & FLAG_HAS_AMT)
+ e1000e_get_hw_control(adapter);
+
+ ew32(WUC, 0);
+
+ if (mac->ops.init_hw(hw))
+ e_err("Hardware Error\n");
+
+ e1000_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ ew32(VET, ETH_P_8021Q);
+
+ e1000e_reset_adaptive(hw);
+
+ if (!netif_running(adapter->netdev) &&
+ !test_bit(__E1000_TESTING, &adapter->state)) {
+ e1000_power_down_phy(adapter);
+ return;
+ }
+
+ e1000_get_phy_info(hw);
+
+ if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN) &&
+ !(adapter->flags & FLAG_SMART_POWER_DOWN)) {
+ u16 phy_data = 0;
+ /*
+ * speed up time to link by disabling smart power down, ignore
+ * the return value of this function because there is nothing
+ * different we would do if it failed
+ */
+ e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data);
+ phy_data &= ~IGP02E1000_PM_SPD;
+ e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, phy_data);
+ }
+}
+
+int e1000e_up(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ e1000_configure(adapter);
+
+ clear_bit(__E1000_DOWN, &adapter->state);
+
+ napi_enable(&adapter->napi);
+ if (adapter->msix_entries)
+ e1000_configure_msix(adapter);
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(adapter->netdev);
+
+ /* fire a link change interrupt to start the watchdog */
+ if (adapter->msix_entries)
+ ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+ else
+ ew32(ICS, E1000_ICS_LSC);
+
+ return 0;
+}
+
+static void e1000e_flush_descriptors(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (!(adapter->flags2 & FLAG2_DMA_BURST))
+ return;
+
+ /* flush pending descriptor writebacks to memory */
+ ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD);
+ ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD);
+
+ /* execute the writes immediately */
+ e1e_flush();
+}
+
+static void e1000e_update_stats(struct e1000_adapter *adapter);
+
+void e1000e_down(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, rctl;
+
+ /*
+ * signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__E1000_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = er32(RCTL);
+ ew32(RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_stop_queue(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ e1e_flush();
+ usleep_range(10000, 20000);
+
+ napi_disable(&adapter->napi);
+ e1000_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netif_carrier_off(netdev);
+
+ spin_lock(&adapter->stats64_lock);
+ e1000e_update_stats(adapter);
+ spin_unlock(&adapter->stats64_lock);
+
+ e1000e_flush_descriptors(adapter);
+ e1000_clean_tx_ring(adapter);
+ e1000_clean_rx_ring(adapter);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ if (!pci_channel_offline(adapter->pdev))
+ e1000e_reset(adapter);
+
+ /*
+ * TODO: for power management, we could drop the link and
+ * pci_disable_device here.
+ */
+}
+
+void e1000e_reinit_locked(struct e1000_adapter *adapter)
+{
+ might_sleep();
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ e1000e_down(adapter);
+ e1000e_up(adapter);
+ clear_bit(__E1000_RESETTING, &adapter->state);
+}
+
+/**
+ * e1000_sw_init - Initialize general software structures (struct e1000_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * e1000_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit e1000_sw_init(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
+ adapter->rx_ps_bsize0 = 128;
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+
+ e1000e_set_interrupt_capability(adapter);
+
+ if (e1000_alloc_queues(adapter))
+ return -ENOMEM;
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ e1000_irq_disable(adapter);
+
+ set_bit(__E1000_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * e1000_intr_msi_test - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t e1000_intr_msi_test(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = er32(ICR);
+
+ e_dbg("icr is %08X\n", icr);
+ if (icr & E1000_ICR_RXSEQ) {
+ adapter->flags &= ~FLAG_MSI_TEST_FAILED;
+ wmb();
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * e1000_test_msi_interrupt - Returns 0 for successful test
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c
+ **/
+static int e1000_test_msi_interrupt(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* poll_enable hasn't been called yet, so don't need disable */
+ /* clear any pending events */
+ er32(ICR);
+
+ /* free the real vector and request a test handler */
+ e1000_free_irq(adapter);
+ e1000e_reset_interrupt_capability(adapter);
+
+ /* Assume that the test fails, if it succeeds then the test
+ * MSI irq handler will unset this flag */
+ adapter->flags |= FLAG_MSI_TEST_FAILED;
+
+ err = pci_enable_msi(adapter->pdev);
+ if (err)
+ goto msi_test_failed;
+
+ err = request_irq(adapter->pdev->irq, e1000_intr_msi_test, 0,
+ netdev->name, netdev);
+ if (err) {
+ pci_disable_msi(adapter->pdev);
+ goto msi_test_failed;
+ }
+
+ wmb();
+
+ e1000_irq_enable(adapter);
+
+ /* fire an unusual interrupt on the test handler */
+ ew32(ICS, E1000_ICS_RXSEQ);
+ e1e_flush();
+ msleep(50);
+
+ e1000_irq_disable(adapter);
+
+ rmb();
+
+ if (adapter->flags & FLAG_MSI_TEST_FAILED) {
+ adapter->int_mode = E1000E_INT_MODE_LEGACY;
+ e_info("MSI interrupt test failed, using legacy interrupt.\n");
+ } else
+ e_dbg("MSI interrupt test succeeded!\n");
+
+ free_irq(adapter->pdev->irq, netdev);
+ pci_disable_msi(adapter->pdev);
+
+msi_test_failed:
+ e1000e_set_interrupt_capability(adapter);
+ return e1000_request_irq(adapter);
+}
+
+/**
+ * e1000_test_msi - Returns 0 if MSI test succeeds or INTx mode is restored
+ * @adapter: board private struct
+ *
+ * code flow taken from tg3.c, called with e1000 interrupts disabled.
+ **/
+static int e1000_test_msi(struct e1000_adapter *adapter)
+{
+ int err;
+ u16 pci_cmd;
+
+ if (!(adapter->flags & FLAG_MSI_ENABLED))
+ return 0;
+
+ /* disable SERR in case the MSI write causes a master abort */
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_SERR)
+ pci_write_config_word(adapter->pdev, PCI_COMMAND,
+ pci_cmd & ~PCI_COMMAND_SERR);
+
+ err = e1000_test_msi_interrupt(adapter);
+
+ /* re-enable SERR */
+ if (pci_cmd & PCI_COMMAND_SERR) {
+ pci_read_config_word(adapter->pdev, PCI_COMMAND, &pci_cmd);
+ pci_cmd |= PCI_COMMAND_SERR;
+ pci_write_config_word(adapter->pdev, PCI_COMMAND, pci_cmd);
+ }
+
+ return err;
+}
+
+/**
+ * e1000_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int e1000_open(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__E1000_TESTING, &adapter->state))
+ return -EBUSY;
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = e1000e_setup_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = e1000e_setup_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now open and reset the part to a known state.
+ */
+ if (adapter->flags & FLAG_HAS_AMT) {
+ e1000e_get_hw_control(adapter);
+ e1000e_reset(adapter);
+ }
+
+ e1000e_power_up_phy(adapter);
+
+ adapter->mng_vlan_id = E1000_MNG_VLAN_NONE;
+ if ((adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
+ e1000_update_mng_vlan(adapter);
+
+ /* DMA latency requirement to workaround early-receive/jumbo issue */
+ if ((adapter->flags & FLAG_HAS_ERT) ||
+ (adapter->hw.mac.type == e1000_pch2lan))
+ pm_qos_add_request(&adapter->netdev->pm_qos_req,
+ PM_QOS_CPU_DMA_LATENCY,
+ PM_QOS_DEFAULT_VALUE);
+
+ /*
+ * before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ e1000_configure(adapter);
+
+ err = e1000_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /*
+ * Work around PCIe errata with MSI interrupts causing some chipsets to
+ * ignore e1000e MSI messages, which means we need to test our MSI
+ * interrupt now
+ */
+ if (adapter->int_mode != E1000E_INT_MODE_LEGACY) {
+ err = e1000_test_msi(adapter);
+ if (err) {
+ e_err("Interrupt allocation failed\n");
+ goto err_req_irq;
+ }
+ }
+
+ /* From here on the code is the same as e1000e_up() */
+ clear_bit(__E1000_DOWN, &adapter->state);
+
+ napi_enable(&adapter->napi);
+
+ e1000_irq_enable(adapter);
+
+ netif_start_queue(netdev);
+
+ adapter->idle_check = true;
+ pm_runtime_put(&pdev->dev);
+
+ /* fire a link status change interrupt to start the watchdog */
+ if (adapter->msix_entries)
+ ew32(ICS, E1000_ICS_LSC | E1000_ICR_OTHER);
+ else
+ ew32(ICS, E1000_ICS_LSC);
+
+ return 0;
+
+err_req_irq:
+ e1000e_release_hw_control(adapter);
+ e1000_power_down_phy(adapter);
+ e1000e_free_rx_resources(adapter);
+err_setup_rx:
+ e1000e_free_tx_resources(adapter);
+err_setup_tx:
+ e1000e_reset(adapter);
+ pm_runtime_put_sync(&pdev->dev);
+
+ return err;
+}
+
+/**
+ * e1000_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int e1000_close(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+
+ pm_runtime_get_sync(&pdev->dev);
+
+ if (!test_bit(__E1000_DOWN, &adapter->state)) {
+ e1000e_down(adapter);
+ e1000_free_irq(adapter);
+ }
+ e1000_power_down_phy(adapter);
+
+ e1000e_free_tx_resources(adapter);
+ e1000e_free_rx_resources(adapter);
+
+ /*
+ * kill manageability vlan ID if supported, but not if a vlan with
+ * the same ID is registered on the host OS (let 8021q kill it)
+ */
+ if (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)
+ e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
+
+ /*
+ * If AMT is enabled, let the firmware know that the network
+ * interface is now closed
+ */
+ if ((adapter->flags & FLAG_HAS_AMT) &&
+ !test_bit(__E1000_TESTING, &adapter->state))
+ e1000e_release_hw_control(adapter);
+
+ if ((adapter->flags & FLAG_HAS_ERT) ||
+ (adapter->hw.mac.type == e1000_pch2lan))
+ pm_qos_remove_request(&adapter->netdev->pm_qos_req);
+
+ pm_runtime_put_sync(&pdev->dev);
+
+ return 0;
+}
+/**
+ * e1000_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int e1000_set_mac(struct net_device *netdev, void *p)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(adapter->hw.mac.addr, addr->sa_data, netdev->addr_len);
+
+ e1000e_rar_set(&adapter->hw, adapter->hw.mac.addr, 0);
+
+ if (adapter->flags & FLAG_RESET_OVERWRITES_LAA) {
+ /* activate the work around */
+ e1000e_set_laa_state_82571(&adapter->hw, 1);
+
+ /*
+ * Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed (in e1000_watchdog), the actual LAA is in one
+ * of the RARs and no incoming packets directed to this port
+ * are dropped. Eventually the LAA will be in RAR[0] and
+ * RAR[14]
+ */
+ e1000e_rar_set(&adapter->hw,
+ adapter->hw.mac.addr,
+ adapter->hw.mac.rar_entry_count - 1);
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_update_phy_task - work thread to update phy
+ * @work: pointer to our work struct
+ *
+ * this worker thread exists because we must acquire a
+ * semaphore to read the phy, which we could msleep while
+ * waiting for it, and we can't msleep in a timer.
+ **/
+static void e1000e_update_phy_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter, update_phy_task);
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ e1000_get_phy_info(&adapter->hw);
+}
+
+/*
+ * Need to wait a few seconds after link up to get diagnostic information from
+ * the phy
+ */
+static void e1000_update_phy_info(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ schedule_work(&adapter->update_phy_task);
+}
+
+/**
+ * e1000e_update_phy_stats - Update the PHY statistics counters
+ * @adapter: board private structure
+ *
+ * Read/clear the upper 16-bit PHY registers and read/accumulate lower
+ **/
+static void e1000e_update_phy_stats(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val;
+ u16 phy_data;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return;
+
+ /*
+ * A page set is expensive so check if already on desired page.
+ * If not, set to the page with the PHY status registers.
+ */
+ hw->phy.addr = 1;
+ ret_val = e1000e_read_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT,
+ &phy_data);
+ if (ret_val)
+ goto release;
+ if (phy_data != (HV_STATS_PAGE << IGP_PAGE_SHIFT)) {
+ ret_val = hw->phy.ops.set_page(hw,
+ HV_STATS_PAGE << IGP_PAGE_SHIFT);
+ if (ret_val)
+ goto release;
+ }
+
+ /* Single Collision Count */
+ hw->phy.ops.read_reg_page(hw, HV_SCC_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_SCC_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.scc += phy_data;
+
+ /* Excessive Collision Count */
+ hw->phy.ops.read_reg_page(hw, HV_ECOL_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_ECOL_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.ecol += phy_data;
+
+ /* Multiple Collision Count */
+ hw->phy.ops.read_reg_page(hw, HV_MCC_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_MCC_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.mcc += phy_data;
+
+ /* Late Collision Count */
+ hw->phy.ops.read_reg_page(hw, HV_LATECOL_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_LATECOL_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.latecol += phy_data;
+
+ /* Collision Count - also used for adaptive IFS */
+ hw->phy.ops.read_reg_page(hw, HV_COLC_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_COLC_LOWER, &phy_data);
+ if (!ret_val)
+ hw->mac.collision_delta = phy_data;
+
+ /* Defer Count */
+ hw->phy.ops.read_reg_page(hw, HV_DC_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_DC_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.dc += phy_data;
+
+ /* Transmit with no CRS */
+ hw->phy.ops.read_reg_page(hw, HV_TNCRS_UPPER, &phy_data);
+ ret_val = hw->phy.ops.read_reg_page(hw, HV_TNCRS_LOWER, &phy_data);
+ if (!ret_val)
+ adapter->stats.tncrs += phy_data;
+
+release:
+ hw->phy.ops.release(hw);
+}
+
+/**
+ * e1000e_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+static void e1000e_update_stats(struct e1000_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ adapter->stats.crcerrs += er32(CRCERRS);
+ adapter->stats.gprc += er32(GPRC);
+ adapter->stats.gorc += er32(GORCL);
+ er32(GORCH); /* Clear gorc */
+ adapter->stats.bprc += er32(BPRC);
+ adapter->stats.mprc += er32(MPRC);
+ adapter->stats.roc += er32(ROC);
+
+ adapter->stats.mpc += er32(MPC);
+
+ /* Half-duplex statistics */
+ if (adapter->link_duplex == HALF_DUPLEX) {
+ if (adapter->flags2 & FLAG2_HAS_PHY_STATS) {
+ e1000e_update_phy_stats(adapter);
+ } else {
+ adapter->stats.scc += er32(SCC);
+ adapter->stats.ecol += er32(ECOL);
+ adapter->stats.mcc += er32(MCC);
+ adapter->stats.latecol += er32(LATECOL);
+ adapter->stats.dc += er32(DC);
+
+ hw->mac.collision_delta = er32(COLC);
+
+ if ((hw->mac.type != e1000_82574) &&
+ (hw->mac.type != e1000_82583))
+ adapter->stats.tncrs += er32(TNCRS);
+ }
+ adapter->stats.colc += hw->mac.collision_delta;
+ }
+
+ adapter->stats.xonrxc += er32(XONRXC);
+ adapter->stats.xontxc += er32(XONTXC);
+ adapter->stats.xoffrxc += er32(XOFFRXC);
+ adapter->stats.xofftxc += er32(XOFFTXC);
+ adapter->stats.gptc += er32(GPTC);
+ adapter->stats.gotc += er32(GOTCL);
+ er32(GOTCH); /* Clear gotc */
+ adapter->stats.rnbc += er32(RNBC);
+ adapter->stats.ruc += er32(RUC);
+
+ adapter->stats.mptc += er32(MPTC);
+ adapter->stats.bptc += er32(BPTC);
+
+ /* used for adaptive IFS */
+
+ hw->mac.tx_packet_delta = er32(TPT);
+ adapter->stats.tpt += hw->mac.tx_packet_delta;
+
+ adapter->stats.algnerrc += er32(ALGNERRC);
+ adapter->stats.rxerrc += er32(RXERRC);
+ adapter->stats.cexterr += er32(CEXTERR);
+ adapter->stats.tsctc += er32(TSCTC);
+ adapter->stats.tsctfc += er32(TSCTFC);
+
+ /* Fill out the OS statistics structure */
+ netdev->stats.multicast = adapter->stats.mprc;
+ netdev->stats.collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /*
+ * RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
+ netdev->stats.rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ netdev->stats.rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ netdev->stats.tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+ netdev->stats.tx_window_errors = adapter->stats.latecol;
+ netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Management Stats */
+ adapter->stats.mgptc += er32(MGTPTC);
+ adapter->stats.mgprc += er32(MGTPRC);
+ adapter->stats.mgpdc += er32(MGTPDC);
+}
+
+/**
+ * e1000_phy_read_status - Update the PHY register status snapshot
+ * @adapter: board private structure
+ **/
+static void e1000_phy_read_status(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_phy_regs *phy = &adapter->phy_regs;
+
+ if ((er32(STATUS) & E1000_STATUS_LU) &&
+ (adapter->hw.phy.media_type == e1000_media_type_copper)) {
+ int ret_val;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
+ ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
+ ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
+ ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
+ ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
+ ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
+ ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
+ ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
+ if (ret_val)
+ e_warn("Error reading PHY register\n");
+ } else {
+ /*
+ * Do not read PHY registers if link is not up
+ * Set values to typical power-on defaults
+ */
+ phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
+ phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
+ BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
+ BMSR_ERCAP);
+ phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
+ ADVERTISE_ALL | ADVERTISE_CSMA);
+ phy->lpa = 0;
+ phy->expansion = EXPANSION_ENABLENPAGE;
+ phy->ctrl1000 = ADVERTISE_1000FULL;
+ phy->stat1000 = 0;
+ phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
+ }
+}
+
+static void e1000_print_link_info(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl = er32(CTRL);
+
+ /* Link status message must follow this format for user tools */
+ printk(KERN_INFO "e1000e: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ adapter->netdev->name,
+ adapter->link_speed,
+ (adapter->link_duplex == FULL_DUPLEX) ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ?
+ "Rx/Tx" :
+ ((ctrl & E1000_CTRL_RFCE) ? "Rx" :
+ ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None")));
+}
+
+static bool e1000e_has_link(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = 0;
+ s32 ret_val = 0;
+
+ /*
+ * get_link_status is set on LSC (link status) interrupt or
+ * Rx sequence error interrupt. get_link_status will stay
+ * false until the check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (hw->mac.get_link_status) {
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ } else {
+ link_active = 1;
+ }
+ break;
+ case e1000_media_type_fiber:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !!(er32(STATUS) & E1000_STATUS_LU);
+ break;
+ case e1000_media_type_internal_serdes:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = adapter->hw.mac.serdes_has_link;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ if ((ret_val == E1000_ERR_PHY) && (hw->phy.type == e1000_phy_igp_3) &&
+ (er32(CTRL) & E1000_PHY_CTRL_GBE_DISABLE)) {
+ /* See e1000_kmrn_lock_loss_workaround_ich8lan() */
+ e_info("Gigabit has been disabled, downgrading speed\n");
+ }
+
+ return link_active;
+}
+
+static void e1000e_enable_receives(struct e1000_adapter *adapter)
+{
+ /* make sure the receive unit is started */
+ if ((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+ (adapter->flags & FLAG_RX_RESTART_NOW)) {
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl = er32(RCTL);
+ ew32(RCTL, rctl | E1000_RCTL_EN);
+ adapter->flags &= ~FLAG_RX_RESTART_NOW;
+ }
+}
+
+static void e1000e_check_82574_phy_workaround(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * With 82574 controllers, PHY needs to be checked periodically
+ * for hung state and reset, if two calls return true
+ */
+ if (e1000_check_phy_82574(hw))
+ adapter->phy_hang_count++;
+ else
+ adapter->phy_hang_count = 0;
+
+ if (adapter->phy_hang_count > 1) {
+ adapter->phy_hang_count = 0;
+ schedule_work(&adapter->reset_task);
+ }
+}
+
+/**
+ * e1000_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void e1000_watchdog(unsigned long data)
+{
+ struct e1000_adapter *adapter = (struct e1000_adapter *) data;
+
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+
+ /* TODO: make this use queue_delayed_work() */
+}
+
+static void e1000_watchdog_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter = container_of(work,
+ struct e1000_adapter, watchdog_task);
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct e1000_phy_info *phy = &adapter->hw.phy;
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 link, tctl;
+
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ link = e1000e_has_link(adapter);
+ if ((netif_carrier_ok(netdev)) && link) {
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
+ e1000e_enable_receives(adapter);
+ goto link_up;
+ }
+
+ if ((e1000e_enable_tx_pkt_filtering(hw)) &&
+ (adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id))
+ e1000_update_mng_vlan(adapter);
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ bool txb2b = 1;
+
+ /* Cancel scheduled suspend requests. */
+ pm_runtime_resume(netdev->dev.parent);
+
+ /* update snapshot of PHY registers on LSC */
+ e1000_phy_read_status(adapter);
+ mac->ops.get_link_up_info(&adapter->hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+ e1000_print_link_info(adapter);
+ /*
+ * On supported PHYs, check for duplex mismatch only
+ * if link has autonegotiated at 10/100 half
+ */
+ if ((hw->phy.type == e1000_phy_igp_3 ||
+ hw->phy.type == e1000_phy_bm) &&
+ (hw->mac.autoneg == true) &&
+ (adapter->link_speed == SPEED_10 ||
+ adapter->link_speed == SPEED_100) &&
+ (adapter->link_duplex == HALF_DUPLEX)) {
+ u16 autoneg_exp;
+
+ e1e_rphy(hw, PHY_AUTONEG_EXP, &autoneg_exp);
+
+ if (!(autoneg_exp & NWAY_ER_LP_NWAY_CAPS))
+ e_info("Autonegotiated half duplex but"
+ " link partner cannot autoneg. "
+ " Try forcing full duplex if "
+ "link gets many collisions.\n");
+ }
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ txb2b = 0;
+ adapter->tx_timeout_factor = 16;
+ break;
+ case SPEED_100:
+ txb2b = 0;
+ adapter->tx_timeout_factor = 10;
+ break;
+ }
+
+ /*
+ * workaround: re-program speed mode bit after
+ * link-up event
+ */
+ if ((adapter->flags & FLAG_TARC_SPEED_MODE_BIT) &&
+ !txb2b) {
+ u32 tarc0;
+ tarc0 = er32(TARC(0));
+ tarc0 &= ~SPEED_MODE_BIT;
+ ew32(TARC(0), tarc0);
+ }
+
+ /*
+ * disable TSO for pcie and 10/100 speeds, to avoid
+ * some hardware issues
+ */
+ if (!(adapter->flags & FLAG_TSO_FORCE)) {
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ case SPEED_100:
+ e_info("10/100 speed: disabling TSO\n");
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ break;
+ case SPEED_1000:
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ break;
+ default:
+ /* oops */
+ break;
+ }
+ }
+
+ /*
+ * enable transmits in the hardware, need to do this
+ * after setting TARC(0)
+ */
+ tctl = er32(TCTL);
+ tctl |= E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+
+ /*
+ * Perform any post-link-up configuration before
+ * reporting link up.
+ */
+ if (phy->ops.cfg_on_link_up)
+ phy->ops.cfg_on_link_up(hw);
+
+ netif_carrier_on(netdev);
+
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ /* Link status message must follow this format */
+ printk(KERN_INFO "e1000e: %s NIC Link is Down\n",
+ adapter->netdev->name);
+ netif_carrier_off(netdev);
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+
+ if (adapter->flags & FLAG_RX_NEEDS_RESTART)
+ schedule_work(&adapter->reset_task);
+ else
+ pm_schedule_suspend(netdev->dev.parent,
+ LINK_TIMEOUT);
+ }
+ }
+
+link_up:
+ spin_lock(&adapter->stats64_lock);
+ e1000e_update_stats(adapter);
+
+ mac->tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
+ adapter->tpt_old = adapter->stats.tpt;
+ mac->collision_delta = adapter->stats.colc - adapter->colc_old;
+ adapter->colc_old = adapter->stats.colc;
+
+ adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
+ adapter->gorc_old = adapter->stats.gorc;
+ adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
+ adapter->gotc_old = adapter->stats.gotc;
+ spin_unlock(&adapter->stats64_lock);
+
+ e1000e_update_adaptive(&adapter->hw);
+
+ if (!netif_carrier_ok(netdev) &&
+ (e1000_desc_unused(tx_ring) + 1 < tx_ring->count)) {
+ /*
+ * We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+
+ /* Simple mode for Interrupt Throttle Rate (ITR) */
+ if (adapter->itr_setting == 4) {
+ /*
+ * Symmetric Tx/Rx gets a reduced ITR=2000;
+ * Total asymmetrical Tx or Rx gets ITR=8000;
+ * everyone else is between 2000-8000.
+ */
+ u32 goc = (adapter->gotc + adapter->gorc) / 10000;
+ u32 dif = (adapter->gotc > adapter->gorc ?
+ adapter->gotc - adapter->gorc :
+ adapter->gorc - adapter->gotc) / 10000;
+ u32 itr = goc > 0 ? (dif * 6000 / goc + 2000) : 8000;
+
+ ew32(ITR, 1000000000 / (itr * 256));
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ if (adapter->msix_entries)
+ ew32(ICS, adapter->rx_ring->ims_val);
+ else
+ ew32(ICS, E1000_ICS_RXDMT0);
+
+ /* flush pending descriptors to memory before detecting Tx hang */
+ e1000e_flush_descriptors(adapter);
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = 1;
+
+ /*
+ * With 82571 controllers, LAA may be overwritten due to controller
+ * reset from the other port. Set the appropriate LAA in RAR[0]
+ */
+ if (e1000e_get_laa_state_82571(hw))
+ e1000e_rar_set(hw, adapter->hw.mac.addr, 0);
+
+ if (adapter->flags2 & FLAG2_CHECK_PHY_HANG)
+ e1000e_check_82574_phy_workaround(adapter);
+
+ /* Reset the timer */
+ if (!test_bit(__E1000_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+}
+
+#define E1000_TX_FLAGS_CSUM 0x00000001
+#define E1000_TX_FLAGS_VLAN 0x00000002
+#define E1000_TX_FLAGS_TSO 0x00000004
+#define E1000_TX_FLAGS_IPV4 0x00000008
+#define E1000_TX_FLAGS_VLAN_MASK 0xffff0000
+#define E1000_TX_FLAGS_VLAN_SHIFT 16
+
+static int e1000_tso(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u32 cmd_length = 0;
+ u16 ipcse = 0, tucse, mss;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ if (skb_header_cloned(skb)) {
+ int err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, iph->daddr,
+ 0, IPPROTO_TCP, 0);
+ cmd_length = E1000_TXD_CMD_IP;
+ ipcse = skb_transport_offset(skb) - 1;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ ipcse = 0;
+ }
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(ip_hdr(skb)->check) - (void *)skb->data;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE |
+ E1000_TXD_CMD_TCP | (skb->len - (hdr_len)));
+
+ i = tx_ring->next_to_use;
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ context_desc->lower_setup.ip_fields.ipcss = ipcss;
+ context_desc->lower_setup.ip_fields.ipcso = ipcso;
+ context_desc->lower_setup.ip_fields.ipcse = cpu_to_le16(ipcse);
+ context_desc->upper_setup.tcp_fields.tucss = tucss;
+ context_desc->upper_setup.tcp_fields.tucso = tucso;
+ context_desc->upper_setup.tcp_fields.tucse = cpu_to_le16(tucse);
+ context_desc->tcp_seg_setup.fields.mss = cpu_to_le16(mss);
+ context_desc->tcp_seg_setup.fields.hdr_len = hdr_len;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_length);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return 1;
+}
+
+static bool e1000_tx_csum(struct e1000_adapter *adapter, struct sk_buff *skb)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_context_desc *context_desc;
+ struct e1000_buffer *buffer_info;
+ unsigned int i;
+ u8 css;
+ u32 cmd_len = E1000_TXD_CMD_DEXT;
+ __be16 protocol;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ return 0;
+
+ if (skb->protocol == cpu_to_be16(ETH_P_8021Q))
+ protocol = vlan_eth_hdr(skb)->h_vlan_encapsulated_proto;
+ else
+ protocol = skb->protocol;
+
+ switch (protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX not handling all IPV6 headers */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ cmd_len |= E1000_TXD_CMD_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ e_warn("checksum_partial proto=%x!\n",
+ be16_to_cpu(protocol));
+ break;
+ }
+
+ css = skb_checksum_start_offset(skb);
+
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+
+ context_desc->lower_setup.ip_config = 0;
+ context_desc->upper_setup.tcp_fields.tucss = css;
+ context_desc->upper_setup.tcp_fields.tucso =
+ css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucse = 0;
+ context_desc->tcp_seg_setup.data = 0;
+ context_desc->cmd_and_length = cpu_to_le32(cmd_len);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return 1;
+}
+
+#define E1000_MAX_PER_TXD 8192
+#define E1000_MAX_TXD_PWR 12
+
+static int e1000_tx_map(struct e1000_adapter *adapter,
+ struct sk_buff *skb, unsigned int first,
+ unsigned int max_per_txd, unsigned int nr_frags,
+ unsigned int mss)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_buffer *buffer_info;
+ unsigned int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int f, bytecount, segs;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ buffer_info->mapped_as_page = false;
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+
+ len -= size;
+ offset += size;
+ count++;
+
+ if (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, max_per_txd);
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = dma_map_page(&pdev->dev, frag->page,
+ offset, size,
+ DMA_TO_DEVICE);
+ buffer_info->mapped_as_page = true;
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+
+ segs = skb_shinfo(skb)->gso_segs ? : 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len;
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[i].segs = segs;
+ tx_ring->buffer_info[i].bytecount = bytecount;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "Tx DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i == 0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ e1000_put_txbuf(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void e1000_tx_queue(struct e1000_adapter *adapter,
+ int tx_flags, int count)
+{
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ struct e1000_tx_desc *tx_desc = NULL;
+ struct e1000_buffer *buffer_info;
+ u32 txd_upper = 0, txd_lower = E1000_TXD_CMD_IFCS;
+ unsigned int i;
+
+ if (tx_flags & E1000_TX_FLAGS_TSO) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D |
+ E1000_TXD_CMD_TSE;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+
+ if (tx_flags & E1000_TX_FLAGS_IPV4)
+ txd_upper |= E1000_TXD_POPTS_IXSM << 8;
+ }
+
+ if (tx_flags & E1000_TX_FLAGS_CSUM) {
+ txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D;
+ txd_upper |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if (tx_flags & E1000_TX_FLAGS_VLAN) {
+ txd_lower |= E1000_TXD_CMD_VLE;
+ txd_upper |= (tx_flags & E1000_TX_FLAGS_VLAN_MASK);
+ }
+
+ i = tx_ring->next_to_use;
+
+ do {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC(*tx_ring, i);
+ tx_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->lower.data =
+ cpu_to_le32(txd_lower | buffer_info->length);
+ tx_desc->upper.data = cpu_to_le32(txd_upper);
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ } while (--count > 0);
+
+ tx_desc->lower.data |= cpu_to_le32(adapter->txd_cmd);
+
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+ /*
+ * we need this if more than one processor can write to our tail
+ * at a time, it synchronizes IO on IA64/Altix systems
+ */
+ mmiowb();
+}
+
+#define MINIMUM_DHCP_PACKET_SIZE 282
+static int e1000_transfer_dhcp_info(struct e1000_adapter *adapter,
+ struct sk_buff *skb)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 length, offset;
+
+ if (vlan_tx_tag_present(skb)) {
+ if (!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) &&
+ (adapter->hw.mng_cookie.status &
+ E1000_MNG_DHCP_COOKIE_STATUS_VLAN)))
+ return 0;
+ }
+
+ if (skb->len <= MINIMUM_DHCP_PACKET_SIZE)
+ return 0;
+
+ if (((struct ethhdr *) skb->data)->h_proto != htons(ETH_P_IP))
+ return 0;
+
+ {
+ const struct iphdr *ip = (struct iphdr *)((u8 *)skb->data+14);
+ struct udphdr *udp;
+
+ if (ip->protocol != IPPROTO_UDP)
+ return 0;
+
+ udp = (struct udphdr *)((u8 *)ip + (ip->ihl << 2));
+ if (ntohs(udp->dest) != 67)
+ return 0;
+
+ offset = (u8 *)udp + 8 - skb->data;
+ length = skb->len - offset;
+ return e1000e_mng_write_dhcp_info(hw, (u8 *)udp + 8, length);
+ }
+
+ return 0;
+}
+
+static int __e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_stop_queue(netdev);
+ /*
+ * Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it.
+ */
+ smp_mb();
+
+ /*
+ * We need to check again in a case another CPU has just
+ * made room available.
+ */
+ if (e1000_desc_unused(adapter->tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int e1000_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (e1000_desc_unused(adapter->tx_ring) >= size)
+ return 0;
+ return __e1000_maybe_stop_tx(netdev, size);
+}
+
+#define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 )
+static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_ring *tx_ring = adapter->tx_ring;
+ unsigned int first;
+ unsigned int max_per_txd = E1000_MAX_PER_TXD;
+ unsigned int max_txd_pwr = E1000_MAX_TXD_PWR;
+ unsigned int tx_flags = 0;
+ unsigned int len = skb_headlen(skb);
+ unsigned int nr_frags;
+ unsigned int mss;
+ int count = 0;
+ int tso;
+ unsigned int f;
+
+ if (test_bit(__E1000_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ mss = skb_shinfo(skb)->gso_size;
+ /*
+ * The controller does a simple calculation to
+ * make sure there is enough room in the FIFO before
+ * initiating the DMA for each buffer. The calc is:
+ * 4 = ceil(buffer len/mss). To make sure we don't
+ * overrun the FIFO, adjust the max buffer len if mss
+ * drops.
+ */
+ if (mss) {
+ u8 hdr_len;
+ max_per_txd = min(mss << 2, max_per_txd);
+ max_txd_pwr = fls(max_per_txd) - 1;
+
+ /*
+ * TSO Workaround for 82571/2/3 Controllers -- if skb->data
+ * points to just header, pull a few bytes of payload from
+ * frags into skb->data
+ */
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ /*
+ * we do this workaround for ES2LAN, but it is un-necessary,
+ * avoiding it could save a lot of cycles
+ */
+ if (skb->data_len && (hdr_len == len)) {
+ unsigned int pull_size;
+
+ pull_size = min((unsigned int)4, skb->data_len);
+ if (!__pskb_pull_tail(skb, pull_size)) {
+ e_err("__pskb_pull_tail failed.\n");
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ len = skb_headlen(skb);
+ }
+ }
+
+ /* reserve a descriptor for the offload context */
+ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
+ count++;
+ count++;
+
+ count += TXD_USE_COUNT(len, max_txd_pwr);
+
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ for (f = 0; f < nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size,
+ max_txd_pwr);
+
+ if (adapter->hw.mac.tx_pkt_filtering)
+ e1000_transfer_dhcp_info(adapter, skb);
+
+ /*
+ * need: count + 2 desc gap to keep tail from touching
+ * head, otherwise try next time
+ */
+ if (e1000_maybe_stop_tx(netdev, count + 2))
+ return NETDEV_TX_BUSY;
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= E1000_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << E1000_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ first = tx_ring->next_to_use;
+
+ tso = e1000_tso(adapter, skb);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (tso)
+ tx_flags |= E1000_TX_FLAGS_TSO;
+ else if (e1000_tx_csum(adapter, skb))
+ tx_flags |= E1000_TX_FLAGS_CSUM;
+
+ /*
+ * Old method was to assume IPv4 packet by default if TSO was enabled.
+ * 82571 hardware supports TSO capabilities for IPv6 as well...
+ * no longer assume, we must.
+ */
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= E1000_TX_FLAGS_IPV4;
+
+ /* if count is 0 then mapping error has occurred */
+ count = e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss);
+ if (count) {
+ e1000_tx_queue(adapter, tx_flags, count);
+ /* Make sure there is space in the ring for the next send. */
+ e1000_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 2);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * e1000_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void e1000_tx_timeout(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void e1000_reset_task(struct work_struct *work)
+{
+ struct e1000_adapter *adapter;
+ adapter = container_of(work, struct e1000_adapter, reset_task);
+
+ /* don't run the task if already down */
+ if (test_bit(__E1000_DOWN, &adapter->state))
+ return;
+
+ if (!((adapter->flags & FLAG_RX_NEEDS_RESTART) &&
+ (adapter->flags & FLAG_RX_RESTART_NOW))) {
+ e1000e_dump(adapter);
+ e_err("Reset adapter\n");
+ }
+ e1000e_reinit_locked(adapter);
+}
+
+/**
+ * e1000_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ *
+ * Returns the address of the device statistics structure.
+ **/
+struct rtnl_link_stats64 *e1000e_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ memset(stats, 0, sizeof(struct rtnl_link_stats64));
+ spin_lock(&adapter->stats64_lock);
+ e1000e_update_stats(adapter);
+ /* Fill out the OS statistics structure */
+ stats->rx_bytes = adapter->stats.gorc;
+ stats->rx_packets = adapter->stats.gprc;
+ stats->tx_bytes = adapter->stats.gotc;
+ stats->tx_packets = adapter->stats.gptc;
+ stats->multicast = adapter->stats.mprc;
+ stats->collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /*
+ * RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC
+ */
+ stats->rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ stats->rx_crc_errors = adapter->stats.crcerrs;
+ stats->rx_frame_errors = adapter->stats.algnerrc;
+ stats->rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ stats->tx_aborted_errors = adapter->stats.ecol;
+ stats->tx_window_errors = adapter->stats.latecol;
+ stats->tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ spin_unlock(&adapter->stats64_lock);
+ return stats;
+}
+
+/**
+ * e1000_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int e1000_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ /* Jumbo frame support */
+ if ((max_frame > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ !(adapter->flags & FLAG_HAS_JUMBO_FRAMES)) {
+ e_err("Jumbo Frames not supported.\n");
+ return -EINVAL;
+ }
+
+ /* Supported frame sizes */
+ if ((new_mtu < ETH_ZLEN + ETH_FCS_LEN + VLAN_HLEN) ||
+ (max_frame > adapter->max_hw_frame_size)) {
+ e_err("Unsupported MTU setting\n");
+ return -EINVAL;
+ }
+
+ /* Jumbo frame workaround on 82579 requires CRC be stripped */
+ if ((adapter->hw.mac.type == e1000_pch2lan) &&
+ !(adapter->flags2 & FLAG2_CRC_STRIPPING) &&
+ (new_mtu > ETH_DATA_LEN)) {
+ e_err("Jumbo Frames not supported on 82579 when CRC "
+ "stripping is disabled.\n");
+ return -EINVAL;
+ }
+
+ /* 82573 Errata 17 */
+ if (((adapter->hw.mac.type == e1000_82573) ||
+ (adapter->hw.mac.type == e1000_82574)) &&
+ (max_frame > ETH_FRAME_LEN + ETH_FCS_LEN)) {
+ adapter->flags2 |= FLAG2_DISABLE_ASPM_L1;
+ e1000e_disable_aspm(adapter->pdev, PCIE_LINK_STATE_L1);
+ }
+
+ while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ /* e1000e_down -> e1000e_reset dependent on max_frame_size & mtu */
+ adapter->max_frame_size = max_frame;
+ e_info("changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+ if (netif_running(netdev))
+ e1000e_down(adapter);
+
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * However with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs
+ */
+
+ if (max_frame <= 2048)
+ adapter->rx_buffer_len = 2048;
+ else
+ adapter->rx_buffer_len = 4096;
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN
+ + ETH_FCS_LEN;
+
+ if (netif_running(netdev))
+ e1000e_up(adapter);
+ else
+ e1000e_reset(adapter);
+
+ clear_bit(__E1000_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
+ int cmd)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ e1000_phy_read_status(adapter);
+
+ switch (data->reg_num & 0x1F) {
+ case MII_BMCR:
+ data->val_out = adapter->phy_regs.bmcr;
+ break;
+ case MII_BMSR:
+ data->val_out = adapter->phy_regs.bmsr;
+ break;
+ case MII_PHYSID1:
+ data->val_out = (adapter->hw.phy.id >> 16);
+ break;
+ case MII_PHYSID2:
+ data->val_out = (adapter->hw.phy.id & 0xFFFF);
+ break;
+ case MII_ADVERTISE:
+ data->val_out = adapter->phy_regs.advertise;
+ break;
+ case MII_LPA:
+ data->val_out = adapter->phy_regs.lpa;
+ break;
+ case MII_EXPANSION:
+ data->val_out = adapter->phy_regs.expansion;
+ break;
+ case MII_CTRL1000:
+ data->val_out = adapter->phy_regs.ctrl1000;
+ break;
+ case MII_STAT1000:
+ data->val_out = adapter->phy_regs.stat1000;
+ break;
+ case MII_ESTATUS:
+ data->val_out = adapter->phy_regs.estatus;
+ break;
+ default:
+ return -EIO;
+ }
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return e1000_mii_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int e1000_init_phy_wakeup(struct e1000_adapter *adapter, u32 wufc)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 i, mac_reg;
+ u16 phy_reg, wuc_enable;
+ int retval = 0;
+
+ /* copy MAC RARs to PHY RARs */
+ e1000_copy_rx_addrs_to_phy_ich8lan(hw);
+
+ retval = hw->phy.ops.acquire(hw);
+ if (retval) {
+ e_err("Could not acquire PHY\n");
+ return retval;
+ }
+
+ /* Enable access to wakeup registers on and set page to BM_WUC_PAGE */
+ retval = e1000_enable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+ if (retval)
+ goto out;
+
+ /* copy MAC MTA to PHY MTA - only needed for pchlan */
+ for (i = 0; i < adapter->hw.mac.mta_reg_count; i++) {
+ mac_reg = E1000_READ_REG_ARRAY(hw, E1000_MTA, i);
+ hw->phy.ops.write_reg_page(hw, BM_MTA(i),
+ (u16)(mac_reg & 0xFFFF));
+ hw->phy.ops.write_reg_page(hw, BM_MTA(i) + 1,
+ (u16)((mac_reg >> 16) & 0xFFFF));
+ }
+
+ /* configure PHY Rx Control register */
+ hw->phy.ops.read_reg_page(&adapter->hw, BM_RCTL, &phy_reg);
+ mac_reg = er32(RCTL);
+ if (mac_reg & E1000_RCTL_UPE)
+ phy_reg |= BM_RCTL_UPE;
+ if (mac_reg & E1000_RCTL_MPE)
+ phy_reg |= BM_RCTL_MPE;
+ phy_reg &= ~(BM_RCTL_MO_MASK);
+ if (mac_reg & E1000_RCTL_MO_3)
+ phy_reg |= (((mac_reg & E1000_RCTL_MO_3) >> E1000_RCTL_MO_SHIFT)
+ << BM_RCTL_MO_SHIFT);
+ if (mac_reg & E1000_RCTL_BAM)
+ phy_reg |= BM_RCTL_BAM;
+ if (mac_reg & E1000_RCTL_PMCF)
+ phy_reg |= BM_RCTL_PMCF;
+ mac_reg = er32(CTRL);
+ if (mac_reg & E1000_CTRL_RFCE)
+ phy_reg |= BM_RCTL_RFCE;
+ hw->phy.ops.write_reg_page(&adapter->hw, BM_RCTL, phy_reg);
+
+ /* enable PHY wakeup in MAC register */
+ ew32(WUFC, wufc);
+ ew32(WUC, E1000_WUC_PHY_WAKE | E1000_WUC_PME_EN);
+
+ /* configure and enable PHY wakeup in PHY registers */
+ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUFC, wufc);
+ hw->phy.ops.write_reg_page(&adapter->hw, BM_WUC, E1000_WUC_PME_EN);
+
+ /* activate PHY wakeup */
+ wuc_enable |= BM_WUC_ENABLE_BIT | BM_WUC_HOST_WU_BIT;
+ retval = e1000_disable_phy_wakeup_reg_access_bm(hw, &wuc_enable);
+ if (retval)
+ e_err("Could not set PHY Host Wakeup bit\n");
+out:
+ hw->phy.ops.release(hw);
+
+ return retval;
+}
+
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake,
+ bool runtime)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, ctrl_ext, rctl, status;
+ /* Runtime suspend should only enable wakeup for link changes */
+ u32 wufc = runtime ? E1000_WUFC_LNKC : adapter->wol;
+ int retval = 0;
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__E1000_RESETTING, &adapter->state));
+ e1000e_down(adapter);
+ e1000_free_irq(adapter);
+ }
+ e1000e_reset_interrupt_capability(adapter);
+
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ e1000_setup_rctl(adapter);
+ e1000_set_multi(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = er32(RCTL);
+ rctl |= E1000_RCTL_MPE;
+ ew32(RCTL, rctl);
+ }
+
+ ctrl = er32(CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP))
+ ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT;
+ ew32(CTRL, ctrl);
+
+ if (adapter->hw.phy.media_type == e1000_media_type_fiber ||
+ adapter->hw.phy.media_type ==
+ e1000_media_type_internal_serdes) {
+ /* keep the laser running in D3 */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_SDP3_DATA;
+ ew32(CTRL_EXT, ctrl_ext);
+ }
+
+ if (adapter->flags & FLAG_IS_ICH)
+ e1000_suspend_workarounds_ich8lan(&adapter->hw);
+
+ /* Allow time for pending master requests to run */
+ e1000e_disable_pcie_master(&adapter->hw);
+
+ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+ /* enable wakeup by the PHY */
+ retval = e1000_init_phy_wakeup(adapter, wufc);
+ if (retval)
+ return retval;
+ } else {
+ /* enable wakeup by the MAC */
+ ew32(WUFC, wufc);
+ ew32(WUC, E1000_WUC_PME_EN);
+ }
+ } else {
+ ew32(WUC, 0);
+ ew32(WUFC, 0);
+ }
+
+ *enable_wake = !!wufc;
+
+ /* make sure adapter isn't asleep if manageability is enabled */
+ if ((adapter->flags & FLAG_MNG_PT_ENABLED) ||
+ (hw->mac.ops.check_mng_mode(hw)))
+ *enable_wake = true;
+
+ if (adapter->hw.phy.type == e1000_phy_igp_3)
+ e1000e_igp3_phy_powerdown_workaround_ich8lan(&adapter->hw);
+
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ e1000e_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+static void e1000_power_off(struct pci_dev *pdev, bool sleep, bool wake)
+{
+ if (sleep && wake) {
+ pci_prepare_to_sleep(pdev);
+ return;
+ }
+
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
+static void e1000_complete_shutdown(struct pci_dev *pdev, bool sleep,
+ bool wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ /*
+ * The pci-e switch on some quad port adapters will report a
+ * correctable error when the MAC transitions from D0 to D3. To
+ * prevent this we need to mask off the correctable errors on the
+ * downstream port of the pci-e switch.
+ */
+ if (adapter->flags & FLAG_IS_QUAD_PORT) {
+ struct pci_dev *us_dev = pdev->bus->self;
+ int pos = pci_pcie_cap(us_dev);
+ u16 devctl;
+
+ pci_read_config_word(us_dev, pos + PCI_EXP_DEVCTL, &devctl);
+ pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL,
+ (devctl & ~PCI_EXP_DEVCTL_CERE));
+
+ e1000_power_off(pdev, sleep, wake);
+
+ pci_write_config_word(us_dev, pos + PCI_EXP_DEVCTL, devctl);
+ } else {
+ e1000_power_off(pdev, sleep, wake);
+ }
+}
+
+#ifdef CONFIG_PCIEASPM
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ pci_disable_link_state_locked(pdev, state);
+}
+#else
+static void __e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ int pos;
+ u16 reg16;
+
+ /*
+ * Both device and parent should have the same ASPM setting.
+ * Disable ASPM in downstream component first and then upstream.
+ */
+ pos = pci_pcie_cap(pdev);
+ pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
+ reg16 &= ~state;
+ pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
+
+ if (!pdev->bus->self)
+ return;
+
+ pos = pci_pcie_cap(pdev->bus->self);
+ pci_read_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, ®16);
+ reg16 &= ~state;
+ pci_write_config_word(pdev->bus->self, pos + PCI_EXP_LNKCTL, reg16);
+}
+#endif
+static void e1000e_disable_aspm(struct pci_dev *pdev, u16 state)
+{
+ dev_info(&pdev->dev, "Disabling ASPM %s %s\n",
+ (state & PCIE_LINK_STATE_L0S) ? "L0s" : "",
+ (state & PCIE_LINK_STATE_L1) ? "L1" : "");
+
+ __e1000e_disable_aspm(pdev, state);
+}
+
+#ifdef CONFIG_PM
+static bool e1000e_pm_ready(struct e1000_adapter *adapter)
+{
+ return !!adapter->tx_ring->buffer_info;
+}
+
+static int __e1000_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 aspm_disable_flag = 0;
+ u32 err;
+
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ e1000e_set_interrupt_capability(adapter);
+ if (netif_running(netdev)) {
+ err = e1000_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ if (hw->mac.type == e1000_pch2lan)
+ e1000_resume_workarounds_pchlan(&adapter->hw);
+
+ e1000e_power_up_phy(adapter);
+
+ /* report the system wakeup cause from S3/S4 */
+ if (adapter->flags2 & FLAG2_HAS_PHY_WAKEUP) {
+ u16 phy_data;
+
+ e1e_rphy(&adapter->hw, BM_WUS, &phy_data);
+ if (phy_data) {
+ e_info("PHY Wakeup cause - %s\n",
+ phy_data & E1000_WUS_EX ? "Unicast Packet" :
+ phy_data & E1000_WUS_MC ? "Multicast Packet" :
+ phy_data & E1000_WUS_BC ? "Broadcast Packet" :
+ phy_data & E1000_WUS_MAG ? "Magic Packet" :
+ phy_data & E1000_WUS_LNKC ? "Link Status "
+ " Change" : "other");
+ }
+ e1e_wphy(&adapter->hw, BM_WUS, ~0);
+ } else {
+ u32 wus = er32(WUS);
+ if (wus) {
+ e_info("MAC Wakeup cause - %s\n",
+ wus & E1000_WUS_EX ? "Unicast Packet" :
+ wus & E1000_WUS_MC ? "Multicast Packet" :
+ wus & E1000_WUS_BC ? "Broadcast Packet" :
+ wus & E1000_WUS_MAG ? "Magic Packet" :
+ wus & E1000_WUS_LNKC ? "Link Status Change" :
+ "other");
+ }
+ ew32(WUS, ~0);
+ }
+
+ e1000e_reset(adapter);
+
+ e1000_init_manageability_pt(adapter);
+
+ if (netif_running(netdev))
+ e1000e_up(adapter);
+
+ netif_device_attach(netdev);
+
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
+ * is up. For all other cases, let the f/w know that the h/w is now
+ * under the control of the driver.
+ */
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000e_get_hw_control(adapter);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int e1000_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake, false);
+ if (!retval)
+ e1000_complete_shutdown(pdev, true, wake);
+
+ return retval;
+}
+
+static int e1000_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (e1000e_pm_ready(adapter))
+ adapter->idle_check = true;
+
+ return __e1000_resume(pdev);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+#ifdef CONFIG_PM_RUNTIME
+static int e1000_runtime_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (e1000e_pm_ready(adapter)) {
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake, true);
+ }
+
+ return 0;
+}
+
+static int e1000_idle(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (!e1000e_pm_ready(adapter))
+ return 0;
+
+ if (adapter->idle_check) {
+ adapter->idle_check = false;
+ if (!e1000e_has_link(adapter))
+ pm_schedule_suspend(dev, MSEC_PER_SEC);
+ }
+
+ return -EBUSY;
+}
+
+static int e1000_runtime_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (!e1000e_pm_ready(adapter))
+ return 0;
+
+ adapter->idle_check = !dev->power.runtime_auto;
+ return __e1000_resume(pdev);
+}
+#endif /* CONFIG_PM_RUNTIME */
+#endif /* CONFIG_PM */
+
+static void e1000_shutdown(struct pci_dev *pdev)
+{
+ bool wake = false;
+
+ __e1000_shutdown(pdev, &wake, false);
+
+ if (system_state == SYSTEM_POWER_OFF)
+ e1000_complete_shutdown(pdev, false, wake);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+
+static irqreturn_t e1000_intr_msix(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->msix_entries) {
+ int vector, msix_irq;
+
+ vector = 0;
+ msix_irq = adapter->msix_entries[vector].vector;
+ disable_irq(msix_irq);
+ e1000_intr_msix_rx(msix_irq, netdev);
+ enable_irq(msix_irq);
+
+ vector++;
+ msix_irq = adapter->msix_entries[vector].vector;
+ disable_irq(msix_irq);
+ e1000_intr_msix_tx(msix_irq, netdev);
+ enable_irq(msix_irq);
+
+ vector++;
+ msix_irq = adapter->msix_entries[vector].vector;
+ disable_irq(msix_irq);
+ e1000_msix_other(msix_irq, netdev);
+ enable_irq(msix_irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void e1000_netpoll(struct net_device *netdev)
+{
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ switch (adapter->int_mode) {
+ case E1000E_INT_MODE_MSIX:
+ e1000_intr_msix(adapter->pdev->irq, netdev);
+ break;
+ case E1000E_INT_MODE_MSI:
+ disable_irq(adapter->pdev->irq);
+ e1000_intr_msi(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+ break;
+ default: /* E1000E_INT_MODE_LEGACY */
+ disable_irq(adapter->pdev->irq);
+ e1000_intr(adapter->pdev->irq, netdev);
+ enable_irq(adapter->pdev->irq);
+ break;
+ }
+}
+#endif
+
+/**
+ * e1000_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t e1000_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ e1000e_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * e1000_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the e1000_resume routine.
+ */
+static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 aspm_disable_flag = 0;
+ int err;
+ pci_ers_result_t result;
+
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
+ if (adapter->flags2 & FLAG2_DISABLE_ASPM_L1)
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pdev->state_saved = true;
+ pci_restore_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ e1000e_reset(adapter);
+ ew32(WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+
+ return result;
+}
+
+/**
+ * e1000_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the e1000_resume routine.
+ */
+static void e1000_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+
+ e1000_init_manageability_pt(adapter);
+
+ if (netif_running(netdev)) {
+ if (e1000e_up(adapter)) {
+ dev_err(&pdev->dev,
+ "can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
+ * is up. For all other cases, let the f/w know that the h/w is now
+ * under the control of the driver.
+ */
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000e_get_hw_control(adapter);
+
+}
+
+static void e1000_print_device_info(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 ret_val;
+ u8 pba_str[E1000_PBANUM_LENGTH];
+
+ /* print bus type/speed/width info */
+ e_info("(PCI Express:2.5GT/s:%s) %pM\n",
+ /* bus width */
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+ "Width x1"),
+ /* MAC address */
+ netdev->dev_addr);
+ e_info("Intel(R) PRO/%s Network Connection\n",
+ (hw->phy.type == e1000_phy_ife) ? "10/100" : "1000");
+ ret_val = e1000_read_pba_string_generic(hw, pba_str,
+ E1000_PBANUM_LENGTH);
+ if (ret_val)
+ strncpy((char *)pba_str, "Unknown", sizeof(pba_str) - 1);
+ e_info("MAC: %d, PHY: %d, PBA No: %s\n",
+ hw->mac.type, hw->phy.type, pba_str);
+}
+
+static void e1000_eeprom_checks(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+ u16 buf = 0;
+
+ if (hw->mac.type != e1000_82573)
+ return;
+
+ ret_val = e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &buf);
+ if (!ret_val && (!(le16_to_cpu(buf) & (1 << 0)))) {
+ /* Deep Smart Power Down (DSPD) */
+ dev_warn(&adapter->pdev->dev,
+ "Warning: detected DSPD enabled in EEPROM\n");
+ }
+}
+
+static const struct net_device_ops e1000e_netdev_ops = {
+ .ndo_open = e1000_open,
+ .ndo_stop = e1000_close,
+ .ndo_start_xmit = e1000_xmit_frame,
+ .ndo_get_stats64 = e1000e_get_stats64,
+ .ndo_set_multicast_list = e1000_set_multi,
+ .ndo_set_mac_address = e1000_set_mac,
+ .ndo_change_mtu = e1000_change_mtu,
+ .ndo_do_ioctl = e1000_ioctl,
+ .ndo_tx_timeout = e1000_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+
+ .ndo_vlan_rx_add_vid = e1000_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = e1000_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = e1000_netpoll,
+#endif
+};
+
+/**
+ * e1000_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in e1000_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * e1000_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit e1000_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct e1000_adapter *adapter;
+ struct e1000_hw *hw;
+ const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
+ resource_size_t mmio_start, mmio_len;
+ resource_size_t flash_start, flash_len;
+
+ static int cards_found;
+ u16 aspm_disable_flag = 0;
+ int i, err, pci_using_dac;
+ u16 eeprom_data = 0;
+ u16 eeprom_apme_mask = E1000_EEPROM_APME;
+
+ if (ei->flags2 & FLAG2_DISABLE_ASPM_L0S)
+ aspm_disable_flag = PCIE_LINK_STATE_L0S;
+ if (ei->flags2 & FLAG2_DISABLE_ASPM_L1)
+ aspm_disable_flag |= PCIE_LINK_STATE_L1;
+ if (aspm_disable_flag)
+ e1000e_disable_aspm(pdev, aspm_disable_flag);
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ }
+
+ err = pci_request_selected_regions_exclusive(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM),
+ e1000e_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ /* AER (Advanced Error Reporting) hooks */
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ /* PCI config space info */
+ err = pci_save_state(pdev);
+ if (err)
+ goto err_alloc_etherdev;
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct e1000_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ netdev->irq = pdev->irq;
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ hw = &adapter->hw;
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->ei = ei;
+ adapter->pba = ei->pba;
+ adapter->flags = ei->flags;
+ adapter->flags2 = ei->flags2;
+ adapter->hw.adapter = adapter;
+ adapter->hw.mac.type = ei->mac;
+ adapter->max_hw_frame_size = ei->max_hw_frame_size;
+ adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+
+ err = -EIO;
+ adapter->hw.hw_addr = ioremap(mmio_start, mmio_len);
+ if (!adapter->hw.hw_addr)
+ goto err_ioremap;
+
+ if ((adapter->flags & FLAG_HAS_FLASH) &&
+ (pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
+ flash_start = pci_resource_start(pdev, 1);
+ flash_len = pci_resource_len(pdev, 1);
+ adapter->hw.flash_address = ioremap(flash_start, flash_len);
+ if (!adapter->hw.flash_address)
+ goto err_flashmap;
+ }
+
+ /* construct the net_device struct */
+ netdev->netdev_ops = &e1000e_netdev_ops;
+ e1000e_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, e1000_clean, 64);
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len;
+
+ adapter->bd_number = cards_found++;
+
+ e1000e_check_options(adapter);
+
+ /* setup adapter struct */
+ err = e1000_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+
+ err = ei->get_variants(adapter);
+ if (err)
+ goto err_hw_init;
+
+ if ((adapter->flags & FLAG_IS_ICH) &&
+ (adapter->flags & FLAG_READ_ONLY_NVM))
+ e1000e_write_protect_nvm_ich8lan(&adapter->hw);
+
+ hw->mac.ops.get_bus_info(&adapter->hw);
+
+ adapter->hw.phy.autoneg_wait_to_complete = 0;
+
+ /* Copper options */
+ if (adapter->hw.phy.media_type == e1000_media_type_copper) {
+ adapter->hw.phy.mdix = AUTO_ALL_MODES;
+ adapter->hw.phy.disable_polarity_correction = 0;
+ adapter->hw.phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (e1000_check_reset_block(&adapter->hw))
+ e_info("PHY reset is blocked due to SOL/IDER session.\n");
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX;
+
+ if (adapter->flags & FLAG_HAS_HW_VLAN_FILTER)
+ netdev->features |= NETIF_F_HW_VLAN_FILTER;
+
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_HW_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (e1000e_enable_mng_pass_thru(&adapter->hw))
+ adapter->flags |= FLAG_MNG_PT_ENABLED;
+
+ /*
+ * before reading the NVM, reset the controller to
+ * put the device in a known good starting state
+ */
+ adapter->hw.mac.ops.reset_hw(&adapter->hw);
+
+ /*
+ * systems with ASPM and others may see the checksum fail on the first
+ * attempt. Let's give it a few tries
+ */
+ for (i = 0;; i++) {
+ if (e1000_validate_nvm_checksum(&adapter->hw) >= 0)
+ break;
+ if (i == 2) {
+ e_err("The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+ }
+
+ e1000_eeprom_checks(adapter);
+
+ /* copy the MAC address */
+ if (e1000e_read_mac_addr(&adapter->hw))
+ e_err("NVM Read Error while reading MAC address\n");
+
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ e_err("Invalid MAC Address: %pM\n", netdev->perm_addr);
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = e1000_watchdog;
+ adapter->watchdog_timer.data = (unsigned long) adapter;
+
+ init_timer(&adapter->phy_info_timer);
+ adapter->phy_info_timer.function = e1000_update_phy_info;
+ adapter->phy_info_timer.data = (unsigned long) adapter;
+
+ INIT_WORK(&adapter->reset_task, e1000_reset_task);
+ INIT_WORK(&adapter->watchdog_task, e1000_watchdog_task);
+ INIT_WORK(&adapter->downshift_task, e1000e_downshift_workaround);
+ INIT_WORK(&adapter->update_phy_task, e1000e_update_phy_task);
+ INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
+
+ /* Initialize link parameters. User can change them with ethtool */
+ adapter->hw.mac.autoneg = 1;
+ adapter->fc_autoneg = 1;
+ adapter->hw.fc.requested_mode = e1000_fc_default;
+ adapter->hw.fc.current_mode = e1000_fc_default;
+ adapter->hw.phy.autoneg_advertised = 0x2f;
+
+ /* ring size defaults */
+ adapter->rx_ring->count = 256;
+ adapter->tx_ring->count = 256;
+
+ /*
+ * Initial Wake on LAN setting - If APM wake is enabled in
+ * the EEPROM, enable the ACPI Magic Packet filter
+ */
+ if (adapter->flags & FLAG_APME_IN_WUC) {
+ /* APME bit in EEPROM is mapped to WUC.APME */
+ eeprom_data = er32(WUC);
+ eeprom_apme_mask = E1000_WUC_APME;
+ if ((hw->mac.type > e1000_ich10lan) &&
+ (eeprom_data & E1000_WUC_PHY_WAKE))
+ adapter->flags2 |= FLAG2_HAS_PHY_WAKEUP;
+ } else if (adapter->flags & FLAG_APME_IN_CTRL3) {
+ if (adapter->flags & FLAG_APME_CHECK_PORT_B &&
+ (adapter->hw.bus.func == 1))
+ e1000_read_nvm(&adapter->hw,
+ NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+ else
+ e1000_read_nvm(&adapter->hw,
+ NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ }
+
+ /* fetch WoL from EEPROM */
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /*
+ * now that we have the eeprom settings, apply the special cases
+ * where the eeprom may be wrong or the board simply won't support
+ * wake on lan on a particular port
+ */
+ if (!(adapter->flags & FLAG_HAS_WOL))
+ adapter->eeprom_wol = 0;
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* save off EEPROM version number */
+ e1000_read_nvm(&adapter->hw, 5, 1, &adapter->eeprom_vers);
+
+ /* reset the hardware with the new settings */
+ e1000e_reset(adapter);
+
+ /*
+ * If the controller has AMT, do not set DRV_LOAD until the interface
+ * is up. For all other cases, let the f/w know that the h/w is now
+ * under the control of the driver.
+ */
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000e_get_hw_control(adapter);
+
+ strncpy(netdev->name, "eth%d", sizeof(netdev->name) - 1);
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ e1000_print_device_info(adapter);
+
+ if (pci_dev_run_wake(pdev))
+ pm_runtime_put_noidle(&pdev->dev);
+
+ return 0;
+
+err_register:
+ if (!(adapter->flags & FLAG_HAS_AMT))
+ e1000e_release_hw_control(adapter);
+err_eeprom:
+ if (!e1000_check_reset_block(&adapter->hw))
+ e1000_phy_hw_reset(&adapter->hw);
+err_hw_init:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+ e1000e_reset_interrupt_capability(adapter);
+err_flashmap:
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * e1000_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * e1000_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit e1000_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct e1000_adapter *adapter = netdev_priv(netdev);
+ bool down = test_bit(__E1000_DOWN, &adapter->state);
+
+ /*
+ * The timers may be rescheduled, so explicitly disable them
+ * from being rescheduled.
+ */
+ if (!down)
+ set_bit(__E1000_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+ cancel_work_sync(&adapter->downshift_task);
+ cancel_work_sync(&adapter->update_phy_task);
+ cancel_work_sync(&adapter->print_hang_task);
+
+ if (!(netdev->flags & IFF_UP))
+ e1000_power_down_phy(adapter);
+
+ /* Don't lie to e1000_close() down the road. */
+ if (!down)
+ clear_bit(__E1000_DOWN, &adapter->state);
+ unregister_netdev(netdev);
+
+ if (pci_dev_run_wake(pdev))
+ pm_runtime_get_noresume(&pdev->dev);
+
+ /*
+ * Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant.
+ */
+ e1000e_release_hw_control(adapter);
+
+ e1000e_reset_interrupt_capability(adapter);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(adapter->hw.hw_addr);
+ if (adapter->hw.flash_address)
+ iounmap(adapter->hw.flash_address);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ free_netdev(netdev);
+
+ /* AER disable */
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/* PCI Error Recovery (ERS) */
+static struct pci_error_handlers e1000_err_handler = {
+ .error_detected = e1000_io_error_detected,
+ .slot_reset = e1000_io_slot_reset,
+ .resume = e1000_io_resume,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(e1000_pci_tbl) = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_COPPER), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_FIBER), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_COPPER_LP), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_QUAD_FIBER), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_DUAL), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571EB_SERDES_QUAD), board_82571 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82571PT_QUAD_COPPER), board_82571 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI), board_82572 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_COPPER), board_82572 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_FIBER), board_82572 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82572EI_SERDES), board_82572 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E), board_82573 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573E_IAMT), board_82573 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82573L), board_82573 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574L), board_82574 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82574LA), board_82574 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82583V), board_82583 },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_DPT),
+ board_80003es2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_COPPER_SPT),
+ board_80003es2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_DPT),
+ board_80003es2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_80003ES2LAN_SERDES_SPT),
+ board_80003es2lan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_G), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IFE_GT), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_AMT), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_C), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_IGP_M_AMT), board_ich8lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH8_82567V_3), board_ich8lan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_G), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IFE_GT), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_AMT), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_C), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_BM), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_AMT), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH9_IGP_M_V), board_ich9lan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LM), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_LF), board_ich9lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_R_BM_V), board_ich9lan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LM), board_ich10lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_LF), board_ich10lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_ICH10_D_BM_V), board_ich10lan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LM), board_pchlan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_M_HV_LC), board_pchlan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DM), board_pchlan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH_D_HV_DC), board_pchlan },
+
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_LM), board_pch2lan },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_PCH2_LV_V), board_pch2lan },
+
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, e1000_pci_tbl);
+
+#ifdef CONFIG_PM
+static const struct dev_pm_ops e1000_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(e1000_suspend, e1000_resume)
+ SET_RUNTIME_PM_OPS(e1000_runtime_suspend,
+ e1000_runtime_resume, e1000_idle)
+};
+#endif
+
+/* PCI Device API Driver */
+static struct pci_driver e1000_driver = {
+ .name = e1000e_driver_name,
+ .id_table = e1000_pci_tbl,
+ .probe = e1000_probe,
+ .remove = __devexit_p(e1000_remove),
+#ifdef CONFIG_PM
+ .driver.pm = &e1000_pm_ops,
+#endif
+ .shutdown = e1000_shutdown,
+ .err_handler = &e1000_err_handler
+};
+
+/**
+ * e1000_init_module - Driver Registration Routine
+ *
+ * e1000_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init e1000_init_module(void)
+{
+ int ret;
+ pr_info("Intel(R) PRO/1000 Network Driver - %s\n",
+ e1000e_driver_version);
+ pr_info("Copyright(c) 1999 - 2011 Intel Corporation.\n");
+ ret = pci_register_driver(&e1000_driver);
+
+ return ret;
+}
+module_init(e1000_init_module);
+
+/**
+ * e1000_exit_module - Driver Exit Cleanup Routine
+ *
+ * e1000_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit e1000_exit_module(void)
+{
+ pci_unregister_driver(&e1000_driver);
+}
+module_exit(e1000_exit_module);
+
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/1000 Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* e1000_main.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+
+#include "e1000.h"
+
+/*
+ * This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define E1000_MAX_NIC 32
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+#define COPYBREAK_DEFAULT 256
+unsigned int copybreak = COPYBREAK_DEFAULT;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+/*
+ * All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
+#define E1000_PARAM(X, desc) \
+ static int __devinitdata X[E1000_MAX_NIC+1] \
+ = E1000_PARAM_INIT; \
+ static unsigned int num_##X; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/*
+ * Transmit Interrupt Delay in units of 1.024 microseconds
+ * Tx interrupt delay needs to typically be set to something non-zero
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+#define DEFAULT_TIDV 8
+#define MAX_TXDELAY 0xFFFF
+#define MIN_TXDELAY 0
+
+/*
+ * Transmit Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
+#define DEFAULT_TADV 32
+#define MAX_TXABSDELAY 0xFFFF
+#define MIN_TXABSDELAY 0
+
+/*
+ * Receive Interrupt Delay in units of 1.024 microseconds
+ * hardware will likely hang if you set this to anything but zero.
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
+#define MAX_RXDELAY 0xFFFF
+#define MIN_RXDELAY 0
+
+/*
+ * Receive Absolute Interrupt Delay in units of 1.024 microseconds
+ *
+ * Valid Range: 0-65535
+ */
+E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
+#define MAX_RXABSDELAY 0xFFFF
+#define MIN_RXABSDELAY 0
+
+/*
+ * Interrupt Throttle Rate (interrupts/sec)
+ *
+ * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
+ */
+E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
+#define DEFAULT_ITR 3
+#define MAX_ITR 100000
+#define MIN_ITR 100
+
+/* IntMode (Interrupt Mode)
+ *
+ * Valid Range: 0 - 2
+ *
+ * Default Value: 2 (MSI-X)
+ */
+E1000_PARAM(IntMode, "Interrupt Mode");
+#define MAX_INTMODE 2
+#define MIN_INTMODE 0
+
+/*
+ * Enable Smart Power Down of the PHY
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 0 (disabled)
+ */
+E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
+
+/*
+ * Enable Kumeran Lock Loss workaround
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
+
+/*
+ * Write Protect NVM
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
+
+/*
+ * Enable CRC Stripping
+ *
+ * Valid Range: 0, 1
+ *
+ * Default Value: 1 (enabled)
+ */
+E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
+ "the CRC");
+
+struct e1000_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ struct e1000_opt_list { int i; char *str; } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit e1000_validate_option(unsigned int *value,
+ const struct e1000_option *opt,
+ struct e1000_adapter *adapter)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ e_info("%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ e_info("%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ e_info("%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ struct e1000_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ e_info("%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
+ opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * e1000e_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+void __devinit e1000e_check_options(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int bd = adapter->bd_number;
+
+ if (bd >= E1000_MAX_NIC) {
+ e_notice("Warning: no configuration for board #%i\n", bd);
+ e_notice("Using defaults for all values\n");
+ }
+
+ { /* Transmit Interrupt Delay */
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TXDELAY,
+ .max = MAX_TXDELAY } }
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ e1000_validate_option(&adapter->tx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Absolute Interrupt Delay */
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Transmit Absolute Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_TADV),
+ .def = DEFAULT_TADV,
+ .arg = { .r = { .min = MIN_TXABSDELAY,
+ .max = MAX_TXABSDELAY } }
+ };
+
+ if (num_TxAbsIntDelay > bd) {
+ adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->tx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RXDELAY,
+ .max = MAX_RXDELAY } }
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ e1000_validate_option(&adapter->rx_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Receive Absolute Interrupt Delay */
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Receive Absolute Interrupt Delay",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_RADV),
+ .def = DEFAULT_RADV,
+ .arg = { .r = { .min = MIN_RXABSDELAY,
+ .max = MAX_RXABSDELAY } }
+ };
+
+ if (num_RxAbsIntDelay > bd) {
+ adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
+ e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
+ adapter);
+ } else {
+ adapter->rx_abs_int_delay = opt.def;
+ }
+ }
+ { /* Interrupt Throttling Rate */
+ static const struct e1000_option opt = {
+ .type = range_option,
+ .name = "Interrupt Throttling Rate (ints/sec)",
+ .err = "using default of "
+ __MODULE_STRING(DEFAULT_ITR),
+ .def = DEFAULT_ITR,
+ .arg = { .r = { .min = MIN_ITR,
+ .max = MAX_ITR } }
+ };
+
+ if (num_InterruptThrottleRate > bd) {
+ adapter->itr = InterruptThrottleRate[bd];
+ switch (adapter->itr) {
+ case 0:
+ e_info("%s turned off\n", opt.name);
+ break;
+ case 1:
+ e_info("%s set to dynamic mode\n", opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 3:
+ e_info("%s set to dynamic conservative mode\n",
+ opt.name);
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ break;
+ case 4:
+ e_info("%s set to simplified (2000-8000 ints) "
+ "mode\n", opt.name);
+ adapter->itr_setting = 4;
+ break;
+ default:
+ /*
+ * Save the setting, because the dynamic bits
+ * change itr.
+ */
+ if (e1000_validate_option(&adapter->itr, &opt,
+ adapter) &&
+ (adapter->itr == 3)) {
+ /*
+ * In case of invalid user value,
+ * default to conservative mode.
+ */
+ adapter->itr_setting = adapter->itr;
+ adapter->itr = 20000;
+ } else {
+ /*
+ * Clear the lower two bits because
+ * they are used as control.
+ */
+ adapter->itr_setting =
+ adapter->itr & ~3;
+ }
+ break;
+ }
+ } else {
+ adapter->itr_setting = opt.def;
+ adapter->itr = 20000;
+ }
+ }
+ { /* Interrupt Mode */
+ static struct e1000_option opt = {
+ .type = range_option,
+ .name = "Interrupt Mode",
+ .err = "defaulting to 2 (MSI-X)",
+ .def = E1000E_INT_MODE_MSIX,
+ .arg = { .r = { .min = MIN_INTMODE,
+ .max = MAX_INTMODE } }
+ };
+
+ if (num_IntMode > bd) {
+ unsigned int int_mode = IntMode[bd];
+ e1000_validate_option(&int_mode, &opt, adapter);
+ adapter->int_mode = int_mode;
+ } else {
+ adapter->int_mode = opt.def;
+ }
+ }
+ { /* Smart Power Down */
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "PHY Smart Power Down",
+ .err = "defaulting to Disabled",
+ .def = OPTION_DISABLED
+ };
+
+ if (num_SmartPowerDownEnable > bd) {
+ unsigned int spd = SmartPowerDownEnable[bd];
+ e1000_validate_option(&spd, &opt, adapter);
+ if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
+ && spd)
+ adapter->flags |= FLAG_SMART_POWER_DOWN;
+ }
+ }
+ { /* CRC Stripping */
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "CRC Stripping",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_CrcStripping > bd) {
+ unsigned int crc_stripping = CrcStripping[bd];
+ e1000_validate_option(&crc_stripping, &opt, adapter);
+ if (crc_stripping == OPTION_ENABLED)
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ } else {
+ adapter->flags2 |= FLAG2_CRC_STRIPPING;
+ }
+ }
+ { /* Kumeran Lock Loss Workaround */
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Kumeran Lock Loss Workaround",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_KumeranLockLoss > bd) {
+ unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
+ e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ kmrn_lock_loss);
+ } else {
+ if (hw->mac.type == e1000_ich8lan)
+ e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
+ opt.def);
+ }
+ }
+ { /* Write-protect NVM */
+ static const struct e1000_option opt = {
+ .type = enable_option,
+ .name = "Write-protect NVM",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (adapter->flags & FLAG_IS_ICH) {
+ if (num_WriteProtectNVM > bd) {
+ unsigned int write_protect_nvm = WriteProtectNVM[bd];
+ e1000_validate_option(&write_protect_nvm, &opt,
+ adapter);
+ if (write_protect_nvm)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ } else {
+ if (opt.def)
+ adapter->flags |= FLAG_READ_ONLY_NVM;
+ }
+ }
+ }
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/delay.h>
+
+#include "e1000.h"
+
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw);
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active);
+static s32 e1000_wait_autoneg(struct e1000_hw *hw);
+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg);
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+ u16 *data, bool read, bool page_set);
+static u32 e1000_get_phy_addr_for_hv_page(u32 page);
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+ u16 *data, bool read);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] = {
+ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ ARRAY_SIZE(e1000_m88_cable_length_table)
+
+static const u16 e1000_igp_2_cable_length_table[] = {
+ 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3,
+ 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41, 6, 10, 14, 18, 22,
+ 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61, 21, 26, 31, 35, 40,
+ 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82, 40, 45, 51, 56, 61,
+ 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104, 60, 66, 72, 77, 82,
+ 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121, 83, 89, 95,
+ 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121,
+ 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+ ARRAY_SIZE(e1000_igp_2_cable_length_table)
+
+#define BM_PHY_REG_PAGE(offset) \
+ ((u16)(((offset) >> PHY_PAGE_SHIFT) & 0xFFFF))
+#define BM_PHY_REG_NUM(offset) \
+ ((u16)(((offset) & MAX_PHY_REG_ADDRESS) |\
+ (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\
+ ~MAX_PHY_REG_ADDRESS)))
+
+#define HV_INTC_FC_PAGE_START 768
+#define I82578_ADDR_REG 29
+#define I82577_ADDR_REG 16
+#define I82577_CFG_REG 22
+#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15)
+#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
+#define I82577_CTRL_REG 23
+
+/* 82577 specific PHY registers */
+#define I82577_PHY_CTRL_2 18
+#define I82577_PHY_STATUS_2 26
+#define I82577_PHY_DIAG_STATUS 31
+
+/* I82577 PHY Status 2 */
+#define I82577_PHY_STATUS2_REV_POLARITY 0x0400
+#define I82577_PHY_STATUS2_MDIX 0x0800
+#define I82577_PHY_STATUS2_SPEED_MASK 0x0300
+#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200
+
+/* I82577 PHY Control 2 */
+#define I82577_PHY_CTRL2_AUTO_MDIX 0x0400
+#define I82577_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
+
+/* I82577 PHY Diagnostics Status */
+#define I82577_DSTATUS_CABLE_LENGTH 0x03FC
+#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2
+
+/* BM PHY Copper Specific Control 1 */
+#define BM_CS_CTRL1 16
+
+#define HV_MUX_DATA_CTRL PHY_REG(776, 16)
+#define HV_MUX_DATA_CTRL_GEN_TO_MAC 0x0400
+#define HV_MUX_DATA_CTRL_FORCE_SPEED 0x0004
+
+/**
+ * e1000e_check_reset_block_generic - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return 0, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
+s32 e1000e_check_reset_block_generic(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ manc = er32(MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ * e1000e_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+s32 e1000e_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+ u16 retry_count = 0;
+
+ if (!(phy->ops.read_reg))
+ goto out;
+
+ while (retry_count < 2) {
+ ret_val = e1e_rphy(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = e1e_rphy(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+ if (phy->id != 0 && phy->id != PHY_REVISION_MASK)
+ goto out;
+
+ retry_count++;
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
+s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ return ret_val;
+
+ return e1e_wphy(hw, M88E1000_PHY_GEN_CONTROL, 0);
+}
+
+/**
+ * e1000e_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
+s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ e_dbg("PHY Address %d is out of range\n", offset);
+ return -E1000_ERR_PARAM;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ ew32(MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ e_dbg("MDI Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ e_dbg("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+ *data = (u16) mdic;
+
+ /*
+ * Allow some time after each MDIC transaction to avoid
+ * reading duplicate data in the next MDIC transaction.
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ udelay(100);
+
+ return 0;
+}
+
+/**
+ * e1000e_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ e_dbg("PHY Address %d is out of range\n", offset);
+ return -E1000_ERR_PARAM;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ ew32(MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = er32(MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ e_dbg("MDI Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ e_dbg("MDI Error\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /*
+ * Allow some time after each MDIC transaction to avoid
+ * reading duplicate data in the next MDIC transaction.
+ */
+ if (hw->mac.type == e1000_pch2lan)
+ udelay(100);
+
+ return 0;
+}
+
+/**
+ * e1000e_read_phy_reg_m88 - Read m88 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000e_write_phy_reg_m88 - Write m88 PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_set_page_igp - Set page as on IGP-like PHY(s)
+ * @hw: pointer to the HW structure
+ * @page: page to set (shifted left when necessary)
+ *
+ * Sets PHY page required for PHY register access. Assumes semaphore is
+ * already acquired. Note, this function sets phy.addr to 1 so the caller
+ * must set it appropriately (if necessary) after this function returns.
+ **/
+s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page)
+{
+ e_dbg("Setting page 0x%x\n", page);
+
+ hw->phy.addr = 1;
+
+ return e1000e_write_phy_reg_mdic(hw, IGP01E1000_PHY_PAGE_SELECT, page);
+}
+
+/**
+ * __e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and stores the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+static s32 __e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
+{
+ s32 ret_val = 0;
+
+ if (!locked) {
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+release:
+ if (!locked)
+ hw->phy.ops.release(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores the
+ * retrieved information in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_phy_reg_igp_locked - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000e_read_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
+{
+ s32 ret_val = 0;
+
+ if (!locked) {
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = e1000e_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val)
+ goto release;
+ }
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+release:
+ if (!locked)
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, false);
+}
+
+/**
+ * e1000e_write_phy_reg_igp_locked - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000e_write_phy_reg_igp(hw, offset, data, true);
+}
+
+/**
+ * __e1000_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary. Then reads the PHY register at offset
+ * using the kumeran interface. The information retrieved is stored in data.
+ * Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = 0;
+
+ if (!locked) {
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN;
+ ew32(KMRNCTRLSTA, kmrnctrlsta);
+ e1e_flush();
+
+ udelay(2);
+
+ kmrnctrlsta = er32(KMRNCTRLSTA);
+ *data = (u16)kmrnctrlsta;
+
+ if (!locked)
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_read_kmrn_reg - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset using the
+ * kumeran interface. The information retrieved is stored in data.
+ * Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000e_read_kmrn_reg_locked - Read kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the kumeran interface. The
+ * information retrieved is stored in data.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ * __e1000_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary. Then write the data to PHY register
+ * at the offset using the kumeran interface. Release any acquired semaphores
+ * before exiting.
+ **/
+static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked)
+{
+ u32 kmrnctrlsta;
+ s32 ret_val = 0;
+
+ if (!locked) {
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) &
+ E1000_KMRNCTRLSTA_OFFSET) | data;
+ ew32(KMRNCTRLSTA, kmrnctrlsta);
+ e1e_flush();
+
+ udelay(2);
+
+ if (!locked)
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_write_kmrn_reg - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to the PHY register at the offset
+ * using the kumeran interface. Release the acquired semaphore before exiting.
+ **/
+s32 e1000e_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, false);
+}
+
+/**
+ * e1000e_write_kmrn_reg_locked - Write kumeran register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Write the data to PHY register at the offset using the kumeran interface.
+ * Assumes semaphore already acquired.
+ **/
+s32 e1000e_write_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_kmrn_reg(hw, offset, data, true);
+}
+
+/**
+ * e1000_copper_link_setup_82577 - Setup 82577 PHY for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 e1000_copper_link_setup_82577(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
+ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= I82577_CFG_ASSERT_CRS_ON_TX;
+
+ /* Enable downshift */
+ phy_data |= I82577_CFG_ENABLE_DOWNSHIFT;
+
+ ret_val = e1e_wphy(hw, I82577_CFG_REG, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
+s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* For BM PHY this bit is downshift enable */
+ if (phy->type != e1000_phy_bm)
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ /* Enable downshift on BM (disabled by default) */
+ if (phy->type == e1000_phy_bm)
+ phy_data |= BME1000_PSCR_ENABLE_DOWNSHIFT;
+
+ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ if ((phy->type == e1000_phy_m88) &&
+ (phy->revision < E1000_REVISION_4) &&
+ (phy->id != BME1000_E_PHY_ID_R2)) {
+ /*
+ * Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((phy->revision == 2) &&
+ (phy->id == M88E1111_I_PHY_ID)) {
+ /* 82573L PHY - set the downshift counter to 5x. */
+ phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if ((phy->type == e1000_phy_bm) && (phy->id == BME1000_E_PHY_ID_R2)) {
+ /* Set PHY page 0, register 29 to 0x0003 */
+ ret_val = e1e_wphy(hw, 29, 0x0003);
+ if (ret_val)
+ return ret_val;
+
+ /* Set PHY page 0, register 30 to 0x0000 */
+ ret_val = e1e_wphy(hw, 30, 0x0000);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Commit the changes. */
+ ret_val = e1000e_commit_phy(hw);
+ if (ret_val) {
+ e_dbg("Error committing the PHY changes\n");
+ return ret_val;
+ }
+
+ if (phy->type == e1000_phy_82578) {
+ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* 82578 PHY - set the downshift count to 1x. */
+ phy_data |= I82578_EPSCR_DOWNSHIFT_ENABLE;
+ phy_data &= ~I82578_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
+s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1000_phy_hw_reset(hw);
+ if (ret_val) {
+ e_dbg("Error resetting the PHY.\n");
+ return ret_val;
+ }
+
+ /*
+ * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
+ msleep(100);
+
+ /* disable lplu d0 during driver init */
+ ret_val = e1000_set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ e_dbg("Error Disabling LPLU D0\n");
+ return ret_val;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (phy->mdix) {
+ case 1:
+ data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ return ret_val;
+
+ /* set auto-master slave resolution settings */
+ if (hw->mac.autoneg) {
+ /*
+ * when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default.
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+
+ /* Set auto Master/Slave resolution process */
+ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~CR_1000T_MS_ENABLE;
+ ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ return ret_val;
+ }
+
+ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ return ret_val;
+
+ /* load defaults for future use */
+ phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+ ((data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy->ms_type) {
+ case e1000_ms_force_master:
+ data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ data |= CR_1000T_MS_ENABLE;
+ data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = e1e_wphy(hw, PHY_1000T_CTRL, data);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_setup_autoneg - Configure PHY for auto-negotiation
+ * @hw: pointer to the HW structure
+ *
+ * Reads the MII auto-neg advertisement register and/or the 1000T control
+ * register and if the PHY is already setup for auto-negotiation, then
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 e1000_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = e1e_rphy(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = e1e_rphy(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /*
+ * Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+ NWAY_AR_100TX_HD_CAPS |
+ NWAY_AR_10T_FD_CAPS |
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+ e_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+ e_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+ e_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+ e_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+ e_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+ e_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+ e_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /*
+ * Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+ * negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /*
+ * Flow control (Rx & Tx) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled, and Tx Flow control is
+ * disabled, by a software over-ride.
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of Rx Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric Rx PAUSE. Later
+ * (in e1000e_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full:
+ /*
+ * Flow control (both Rx and Tx) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ e_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ return ret_val;
+ }
+
+ ret_val = e1e_wphy(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL)
+ ret_val = e1e_wphy(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg);
+
+ return ret_val;
+}
+
+/**
+ * e1000_copper_link_autoneg - Setup/Enable autoneg for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Performs initial bounds checking on autoneg advertisement parameter, then
+ * configure to advertise the full capability. Setup the PHY to autoneg
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 e1000_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ /*
+ * Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ */
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /*
+ * If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
+ e_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = e1000_phy_setup_autoneg(hw);
+ if (ret_val) {
+ e_dbg("Error Setting up Auto-Negotiation\n");
+ return ret_val;
+ }
+ e_dbg("Restarting Auto-Neg\n");
+
+ /*
+ * Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ return ret_val;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = e1000_wait_autoneg(hw);
+ if (ret_val) {
+ e_dbg("Error while waiting for "
+ "autoneg to complete\n");
+ return ret_val;
+ }
+ }
+
+ hw->mac.get_link_status = 1;
+
+ return ret_val;
+}
+
+/**
+ * e1000e_setup_copper_link - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * speed and duplex. Then we check for link, once link is established calls
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 e1000e_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ bool link;
+
+ if (hw->mac.autoneg) {
+ /*
+ * Setup autoneg and flow control advertisement and perform
+ * autonegotiation.
+ */
+ ret_val = e1000_copper_link_autoneg(hw);
+ if (ret_val)
+ return ret_val;
+ } else {
+ /*
+ * PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
+ e_dbg("Forcing Speed and Duplex\n");
+ ret_val = e1000_phy_force_speed_duplex(hw);
+ if (ret_val) {
+ e_dbg("Error Forcing Speed and Duplex\n");
+ return ret_val;
+ }
+ }
+
+ /*
+ * Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ ret_val = e1000e_phy_has_link_generic(hw,
+ COPPER_LINK_UP_LIMIT,
+ 10,
+ &link);
+ if (ret_val)
+ return ret_val;
+
+ if (link) {
+ e_dbg("Valid link established!!!\n");
+ e1000e_config_collision_dist(hw);
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ } else {
+ e_dbg("Unable to establish link!!!\n");
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 e1000e_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("IGP PSCR: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link)
+ e_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Resets the PHY to commit the
+ * changes. If time expires while waiting for link up, we reset the DSP.
+ * After reset, TX_CLK and CRS on Tx must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
+s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e_dbg("M88E1000 PSCR: %X\n", phy_data);
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /* Reset the phy to commit changes. */
+ ret_val = e1000e_commit_phy(hw);
+ if (ret_val)
+ return ret_val;
+
+ if (phy->autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link) {
+ if (hw->phy.type != e1000_phy_m88) {
+ e_dbg("Link taking longer than expected.\n");
+ } else {
+ /*
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = e1e_wphy(hw, M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_phy_reset_dsp(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ return ret_val;
+ }
+
+ if (hw->phy.type != e1000_phy_m88)
+ return 0;
+
+ ret_val = e1e_rphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Resetting the phy means we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock from
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = e1e_wphy(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = e1e_wphy(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_ife - Force PHY speed & duplex
+ * @hw: pointer to the HW structure
+ *
+ * Forces the speed and duplex settings of the PHY.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+s32 e1000_phy_force_speed_duplex_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &data);
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, data);
+ if (ret_val)
+ goto out;
+
+ /* Disable MDI-X support for 10/100 */
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IFE_PMC_AUTO_MDIX;
+ data &= ~IFE_PMC_FORCE_MDIX;
+
+ ret_val = e1e_wphy(hw, IFE_PHY_MDIX_CONTROL, data);
+ if (ret_val)
+ goto out;
+
+ e_dbg("IFE PMC: %X\n", data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link on IFE phy.\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ e_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * Forces speed and duplex on the PHY by doing the following: disable flow
+ * control, force speed/duplex on the MAC, disable auto speed detection,
+ * disable auto-negotiation, configure duplex, configure speed, configure
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
+void e1000e_phy_force_speed_duplex_setup(struct e1000_hw *hw, u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
+ /* Turn off flow control when forcing speed/duplex */
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
+ ctrl = er32(CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ /* Disable Auto Speed Detection */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Disable autoneg on the phy */
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Forcing Full or Half Duplex? */
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ e_dbg("Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
+ e_dbg("Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ e_dbg("Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ e_dbg("Forcing 10mb\n");
+ }
+
+ e1000e_config_collision_dist(hw);
+
+ ew32(CTRL, ctrl);
+}
+
+/**
+ * e1000e_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_check_downshift - Checks whether a downshift in speed occurred
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
+s32 e1000e_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ switch (phy->type) {
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ case e1000_phy_bm:
+ case e1000_phy_82578:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ case e1000_phy_igp_2:
+ case e1000_phy_igp_3:
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ break;
+ default:
+ /* speed downshift not supported */
+ phy->speed_downgraded = false;
+ return 0;
+ }
+
+ ret_val = e1e_rphy(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask);
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_m88 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_igp - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY port status register, and the
+ * current speed (since there is no polarity at 100Mbps).
+ **/
+s32 e1000_check_polarity_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data, offset, mask;
+
+ /*
+ * Polarity is determined based on the speed of
+ * our connection.
+ */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
+ } else {
+ /*
+ * This really only applies to 10Mbps since
+ * there is no polarity for 100Mbps (always 0).
+ */
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
+ ret_val = e1e_rphy(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_ife - Check cable polarity for IFE PHY
+ * @hw: pointer to the HW structure
+ *
+ * Polarity is determined on the polarity reversal feature being enabled.
+ **/
+s32 e1000_check_polarity_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ /*
+ * Polarity is determined based on the reversal feature being enabled.
+ */
+ if (phy->polarity_correction) {
+ offset = IFE_PHY_EXTENDED_STATUS_CONTROL;
+ mask = IFE_PESC_POLARITY_REVERSED;
+ } else {
+ offset = IFE_PHY_SPECIAL_CONTROL;
+ mask = IFE_PSC_FORCE_POLARITY;
+ }
+
+ ret_val = e1e_rphy(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->cable_polarity = (phy_data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * e1000_wait_autoneg - Wait for auto-neg completion
+ * @hw: pointer to the HW structure
+ *
+ * Waits for auto-negotiation to complete or for the auto-negotiation time
+ * limit to expire, which ever happens first.
+ **/
+static s32 e1000_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
+ msleep(100);
+ }
+
+ /*
+ * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ * has completed.
+ */
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_has_link_generic - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ * @success: pointer to whether polling was successful or not
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ for (i = 0; i < iterations; i++) {
+ /*
+ * Some PHYs require the PHY_STATUS register to be read
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
+ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ /*
+ * If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ udelay(usec_interval);
+ ret_val = e1e_rphy(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+
+ *success = (i < iterations);
+
+ return ret_val;
+}
+
+/**
+ * e1000e_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * information. The cable length is determined by averaging the minimum and
+ * maximum values to get the "average" cable length. The m88 PHY has four
+ * possible cable length values, which are:
+ * Register Value Cable Length
+ * 0 < 50 meters
+ * 1 50 - 80 meters
+ * 2 80 - 110 meters
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
+s32 e1000e_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * received signal, adjusting for the attenuation produced by the
+ * cable. By reading the AGC registers, which represent the
+ * combination of coarse and fine gain value, the value can be put
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
+s32 e1000e_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, i, agc_value = 0;
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = e1e_rphy(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ /*
+ * Getting bits 15:9, which represent the combination of
+ * coarse and fine gain values. The result is a number
+ * that can be put into the lookup table to obtain the
+ * approximate cable length.
+ */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0))
+ return -E1000_ERR_PHY;
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+ return ret_val;
+}
+
+/**
+ * e1000e_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * to verify that link is up. Read the PHY special control register to
+ * determine the polarity and 10base-T extended distance. Read the PHY
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 e1000e_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ if (phy->media_type != e1000_media_type_copper) {
+ e_dbg("Phy info is only valid for copper media\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link) {
+ e_dbg("Phy info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy->polarity_correction = (phy_data &
+ M88E1000_PSCR_POLARITY_REVERSAL);
+
+ ret_val = e1000_check_polarity_m88(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX);
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ ret_val = e1000_get_cable_length(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ return ret_val;
+
+ phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ /* Set values to "undefined" */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000e_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 e1000e_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ return ret_val;
+
+ if (!link) {
+ e_dbg("Phy info is only valid if link is up\n");
+ return -E1000_ERR_CONFIG;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = e1000_check_polarity_igp(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ phy->is_mdix = (data & IGP01E1000_PSSR_MDIX);
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ ret_val = e1000_get_cable_length(hw);
+ if (ret_val)
+ return ret_val;
+
+ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ return ret_val;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_phy_info_ife - Retrieves various IFE PHY states
+ * @hw: pointer to the HW structure
+ *
+ * Populates "phy" structure with various feature states.
+ **/
+s32 e1000_get_phy_info_ife(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ e_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = e1e_rphy(hw, IFE_PHY_SPECIAL_CONTROL, &data);
+ if (ret_val)
+ goto out;
+ phy->polarity_correction = (data & IFE_PSC_AUTO_POLARITY_DISABLE)
+ ? false : true;
+
+ if (phy->polarity_correction) {
+ ret_val = e1000_check_polarity_ife(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /* Polarity is forced */
+ phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+ }
+
+ ret_val = e1e_rphy(hw, IFE_PHY_MDIX_CONTROL, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IFE_PMC_MDIX_STATUS) ? true : false;
+
+ /* The following parameters are undefined for 10/100 operation. */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
+s32 e1000e_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ return ret_val;
+
+ phy_ctrl |= MII_CR_RESET;
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ return ret_val;
+
+ udelay(1);
+
+ return ret_val;
+}
+
+/**
+ * e1000e_phy_hw_reset_generic - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * semaphore (if necessary) and read/set/write the device control reset
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and release the semaphore (if necessary).
+ **/
+s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl;
+
+ ret_val = e1000_check_reset_block(hw);
+ if (ret_val)
+ return 0;
+
+ ret_val = phy->ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_PHY_RST);
+ e1e_flush();
+
+ udelay(phy->reset_delay_us);
+
+ ew32(CTRL, ctrl);
+ e1e_flush();
+
+ udelay(150);
+
+ phy->ops.release(hw);
+
+ return e1000_get_phy_cfg_done(hw);
+}
+
+/**
+ * e1000e_get_cfg_done - Generic configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Generic function to wait 10 milli-seconds for configuration to complete
+ * and return success.
+ **/
+s32 e1000e_get_cfg_done(struct e1000_hw *hw)
+{
+ mdelay(10);
+ return 0;
+}
+
+/**
+ * e1000e_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 e1000e_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ e_dbg("Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ e1e_wphy(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ e1e_wphy(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ e1e_wphy(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ e1e_wphy(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to Tx amplitude in Gig mode */
+ e1e_wphy(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ e1e_wphy(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ e1e_wphy(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ e1e_wphy(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ e1e_wphy(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ e1e_wphy(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ e1e_wphy(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ e1e_wphy(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ e1e_wphy(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ e1e_wphy(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ e1e_wphy(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ e1e_wphy(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ e1e_wphy(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ e1e_wphy(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ e1e_wphy(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ e1e_wphy(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ e1e_wphy(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ e1e_wphy(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ e1e_wphy(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ e1e_wphy(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ e1e_wphy(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ e1e_wphy(hw, 0x1798, 0xD008);
+ /*
+ * Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ e1e_wphy(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ e1e_wphy(hw, 0x187A, 0x0800);
+ /*
+ * Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ e1e_wphy(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ e1e_wphy(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ e1e_wphy(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ e1e_wphy(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
+/* Internal function pointers */
+
+/**
+ * e1000_get_phy_cfg_done - Generic PHY configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Return success if silicon family did not implement a family specific
+ * get_cfg_done function.
+ **/
+static s32 e1000_get_phy_cfg_done(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.get_cfg_done)
+ return hw->phy.ops.get_cfg_done(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_phy_force_speed_duplex - Generic force PHY speed/duplex
+ * @hw: pointer to the HW structure
+ *
+ * When the silicon family has not implemented a forced speed/duplex
+ * function for the PHY, simply return 0.
+ **/
+static s32 e1000_phy_force_speed_duplex(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.force_speed_duplex)
+ return hw->phy.ops.force_speed_duplex(hw);
+
+ return 0;
+}
+
+/**
+ * e1000e_get_phy_type_from_id - Get PHY type from id
+ * @phy_id: phy_id read from the phy
+ *
+ * Returns the phy type from the id.
+ **/
+enum e1000_phy_type e1000e_get_phy_type_from_id(u32 phy_id)
+{
+ enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+ switch (phy_id) {
+ case M88E1000_I_PHY_ID:
+ case M88E1000_E_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ case M88E1011_I_PHY_ID:
+ phy_type = e1000_phy_m88;
+ break;
+ case IGP01E1000_I_PHY_ID: /* IGP 1 & 2 share this */
+ phy_type = e1000_phy_igp_2;
+ break;
+ case GG82563_E_PHY_ID:
+ phy_type = e1000_phy_gg82563;
+ break;
+ case IGP03E1000_E_PHY_ID:
+ phy_type = e1000_phy_igp_3;
+ break;
+ case IFE_E_PHY_ID:
+ case IFE_PLUS_E_PHY_ID:
+ case IFE_C_E_PHY_ID:
+ phy_type = e1000_phy_ife;
+ break;
+ case BME1000_E_PHY_ID:
+ case BME1000_E_PHY_ID_R2:
+ phy_type = e1000_phy_bm;
+ break;
+ case I82578_E_PHY_ID:
+ phy_type = e1000_phy_82578;
+ break;
+ case I82577_E_PHY_ID:
+ phy_type = e1000_phy_82577;
+ break;
+ case I82579_E_PHY_ID:
+ phy_type = e1000_phy_82579;
+ break;
+ default:
+ phy_type = e1000_phy_unknown;
+ break;
+ }
+ return phy_type;
+}
+
+/**
+ * e1000e_determine_phy_address - Determines PHY address.
+ * @hw: pointer to the HW structure
+ *
+ * This uses a trial and error method to loop through possible PHY
+ * addresses. It tests each by reading the PHY ID registers and
+ * checking for a match.
+ **/
+s32 e1000e_determine_phy_address(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_PHY_TYPE;
+ u32 phy_addr = 0;
+ u32 i;
+ enum e1000_phy_type phy_type = e1000_phy_unknown;
+
+ hw->phy.id = phy_type;
+
+ for (phy_addr = 0; phy_addr < E1000_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.addr = phy_addr;
+ i = 0;
+
+ do {
+ e1000e_get_phy_id(hw);
+ phy_type = e1000e_get_phy_type_from_id(hw->phy.id);
+
+ /*
+ * If phy_type is valid, break - we found our
+ * PHY address
+ */
+ if (phy_type != e1000_phy_unknown) {
+ ret_val = 0;
+ goto out;
+ }
+ usleep_range(1000, 2000);
+ i++;
+ } while (i < 10);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_phy_addr_for_bm_page - Retrieve PHY page address
+ * @page: page to access
+ *
+ * Returns the phy address for the page requested.
+ **/
+static u32 e1000_get_phy_addr_for_bm_page(u32 page, u32 reg)
+{
+ u32 phy_addr = 2;
+
+ if ((page >= 768) || (page == 0 && reg == 25) || (reg == 31))
+ phy_addr = 1;
+
+ return phy_addr;
+}
+
+/**
+ * e1000e_write_phy_reg_bm - Write BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u32 page = offset >> IGP_PAGE_SHIFT;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+ false, false);
+ goto out;
+ }
+
+ hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ u32 page_shift, page_select;
+
+ /*
+ * Page select is register 31 for phy address 1 and 22 for
+ * phy address 2 and 3. Page select is shifted only for
+ * phy address 1.
+ */
+ if (hw->phy.addr == 1) {
+ page_shift = IGP_PAGE_SHIFT;
+ page_select = IGP01E1000_PHY_PAGE_SELECT;
+ } else {
+ page_shift = 0;
+ page_select = BM_PHY_PAGE_SELECT;
+ }
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+ (page << page_shift));
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+out:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * e1000e_read_phy_reg_bm - Read BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u32 page = offset >> IGP_PAGE_SHIFT;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+ true, false);
+ goto out;
+ }
+
+ hw->phy.addr = e1000_get_phy_addr_for_bm_page(page, offset);
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ u32 page_shift, page_select;
+
+ /*
+ * Page select is register 31 for phy address 1 and 22 for
+ * phy address 2 and 3. Page select is shifted only for
+ * phy address 1.
+ */
+ if (hw->phy.addr == 1) {
+ page_shift = IGP_PAGE_SHIFT;
+ page_select = IGP01E1000_PHY_PAGE_SELECT;
+ } else {
+ page_shift = 0;
+ page_select = BM_PHY_PAGE_SELECT;
+ }
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, page_select,
+ (page << page_shift));
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+out:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * e1000e_read_phy_reg_bm2 - Read BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 e1000e_read_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+ true, false);
+ goto out;
+ }
+
+ hw->phy.addr = 1;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+out:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * e1000e_write_phy_reg_bm2 - Write BM PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 e1000e_write_phy_reg_bm2(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+ u16 page = (u16)(offset >> IGP_PAGE_SHIFT);
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+ false, false);
+ goto out;
+ }
+
+ hw->phy.addr = 1;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_PHY_PAGE_SELECT,
+ page);
+
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+out:
+ hw->phy.ops.release(hw);
+ return ret_val;
+}
+
+/**
+ * e1000_enable_phy_wakeup_reg_access_bm - enable access to BM wakeup registers
+ * @hw: pointer to the HW structure
+ * @phy_reg: pointer to store original contents of BM_WUC_ENABLE_REG
+ *
+ * Assumes semaphore already acquired and phy_reg points to a valid memory
+ * address to store contents of the BM_WUC_ENABLE_REG register.
+ **/
+s32 e1000_enable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+ s32 ret_val;
+ u16 temp;
+
+ /* All page select, port ctrl and wakeup registers use phy address 1 */
+ hw->phy.addr = 1;
+
+ /* Select Port Control Registers page */
+ ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+ if (ret_val) {
+ e_dbg("Could not set Port Control page\n");
+ goto out;
+ }
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, phy_reg);
+ if (ret_val) {
+ e_dbg("Could not read PHY register %d.%d\n",
+ BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+ goto out;
+ }
+
+ /*
+ * Enable both PHY wakeup mode and Wakeup register page writes.
+ * Prevent a power state change by disabling ME and Host PHY wakeup.
+ */
+ temp = *phy_reg;
+ temp |= BM_WUC_ENABLE_BIT;
+ temp &= ~(BM_WUC_ME_WU_BIT | BM_WUC_HOST_WU_BIT);
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, temp);
+ if (ret_val) {
+ e_dbg("Could not write PHY register %d.%d\n",
+ BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+ goto out;
+ }
+
+ /* Select Host Wakeup Registers page */
+ ret_val = e1000_set_page_igp(hw, (BM_WUC_PAGE << IGP_PAGE_SHIFT));
+
+ /* caller now able to write registers on the Wakeup registers page */
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_disable_phy_wakeup_reg_access_bm - disable access to BM wakeup regs
+ * @hw: pointer to the HW structure
+ * @phy_reg: pointer to original contents of BM_WUC_ENABLE_REG
+ *
+ * Restore BM_WUC_ENABLE_REG to its original value.
+ *
+ * Assumes semaphore already acquired and *phy_reg is the contents of the
+ * BM_WUC_ENABLE_REG before register(s) on BM_WUC_PAGE were accessed by
+ * caller.
+ **/
+s32 e1000_disable_phy_wakeup_reg_access_bm(struct e1000_hw *hw, u16 *phy_reg)
+{
+ s32 ret_val = 0;
+
+ /* Select Port Control Registers page */
+ ret_val = e1000_set_page_igp(hw, (BM_PORT_CTRL_PAGE << IGP_PAGE_SHIFT));
+ if (ret_val) {
+ e_dbg("Could not set Port Control page\n");
+ goto out;
+ }
+
+ /* Restore 769.17 to its original value */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ENABLE_REG, *phy_reg);
+ if (ret_val)
+ e_dbg("Could not restore PHY register %d.%d\n",
+ BM_PORT_CTRL_PAGE, BM_WUC_ENABLE_REG);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_access_phy_wakeup_reg_bm - Read/write BM PHY wakeup register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read or written
+ * @data: pointer to the data to read or write
+ * @read: determines if operation is read or write
+ * @page_set: BM_WUC_PAGE already set and access enabled
+ *
+ * Read the PHY register at offset and store the retrieved information in
+ * data, or write data to PHY register at offset. Note the procedure to
+ * access the PHY wakeup registers is different than reading the other PHY
+ * registers. It works as such:
+ * 1) Set 769.17.2 (page 769, register 17, bit 2) = 1
+ * 2) Set page to 800 for host (801 if we were manageability)
+ * 3) Write the address using the address opcode (0x11)
+ * 4) Read or write the data using the data opcode (0x12)
+ * 5) Restore 769.17.2 to its original value
+ *
+ * Steps 1 and 2 are done by e1000_enable_phy_wakeup_reg_access_bm() and
+ * step 5 is done by e1000_disable_phy_wakeup_reg_access_bm().
+ *
+ * Assumes semaphore is already acquired. When page_set==true, assumes
+ * the PHY page is set to BM_WUC_PAGE (i.e. a function in the call stack
+ * is responsible for calls to e1000_[enable|disable]_phy_wakeup_reg_bm()).
+ **/
+static s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
+ u16 *data, bool read, bool page_set)
+{
+ s32 ret_val;
+ u16 reg = BM_PHY_REG_NUM(offset);
+ u16 page = BM_PHY_REG_PAGE(offset);
+ u16 phy_reg = 0;
+
+ /* Gig must be disabled for MDIO accesses to Host Wakeup reg page */
+ if ((hw->mac.type == e1000_pchlan) &&
+ (!(er32(PHY_CTRL) & E1000_PHY_CTRL_GBE_DISABLE)))
+ e_dbg("Attempting to access page %d while gig enabled.\n",
+ page);
+
+ if (!page_set) {
+ /* Enable access to PHY wakeup registers */
+ ret_val = e1000_enable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+ if (ret_val) {
+ e_dbg("Could not enable PHY wakeup reg access\n");
+ goto out;
+ }
+ }
+
+ e_dbg("Accessing PHY page %d reg 0x%x\n", page, reg);
+
+ /* Write the Wakeup register page offset value using opcode 0x11 */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_ADDRESS_OPCODE, reg);
+ if (ret_val) {
+ e_dbg("Could not write address opcode to page %d\n", page);
+ goto out;
+ }
+
+ if (read) {
+ /* Read the Wakeup register page value using opcode 0x12 */
+ ret_val = e1000e_read_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+ data);
+ } else {
+ /* Write the Wakeup register page value using opcode 0x12 */
+ ret_val = e1000e_write_phy_reg_mdic(hw, BM_WUC_DATA_OPCODE,
+ *data);
+ }
+
+ if (ret_val) {
+ e_dbg("Could not access PHY reg %d.%d\n", page, reg);
+ goto out;
+ }
+
+ if (!page_set)
+ ret_val = e1000_disable_phy_wakeup_reg_access_bm(hw, &phy_reg);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_up_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ e1e_wphy(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * e1000_power_down_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, restore the link to previous
+ * settings.
+ **/
+void e1000_power_down_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ e1e_rphy(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ e1e_wphy(hw, PHY_CONTROL, mii_reg);
+ usleep_range(1000, 2000);
+}
+
+/**
+ * e1000e_commit_phy - Soft PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Performs a soft PHY reset on those that apply. This is a function pointer
+ * entry point called by drivers.
+ **/
+s32 e1000e_commit_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.commit)
+ return hw->phy.ops.commit(hw);
+
+ return 0;
+}
+
+/**
+ * e1000_set_d0_lplu_state - Sets low power link up state for D0
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D0
+ * and SmartSpeed is disabled when active is true, else clear lplu for D0
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained. This is a function pointer entry point called by drivers.
+ **/
+static s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active)
+{
+ if (hw->phy.ops.set_d0_lplu_state)
+ return hw->phy.ops.set_d0_lplu_state(hw, active);
+
+ return 0;
+}
+
+/**
+ * __e1000_read_phy_reg_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and stores the retrieved information in data. Release any acquired
+ * semaphore before exiting.
+ **/
+static s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
+ bool locked, bool page_set)
+{
+ s32 ret_val;
+ u16 page = BM_PHY_REG_PAGE(offset);
+ u16 reg = BM_PHY_REG_NUM(offset);
+ u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
+ true, page_set);
+ goto out;
+ }
+
+ if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+ ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+ data, true);
+ goto out;
+ }
+
+ if (!page_set) {
+ if (page == HV_INTC_FC_PAGE_START)
+ page = 0;
+
+ if (reg > MAX_PHY_MULTI_PAGE_REG) {
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000_set_page_igp(hw,
+ (page << IGP_PAGE_SHIFT));
+
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
+ }
+ }
+
+ e_dbg("reading PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+ page << IGP_PAGE_SHIFT, reg);
+
+ ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+ data);
+out:
+ if (!locked)
+ hw->phy.ops.release(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_read_phy_reg_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore then reads the PHY register at offset and stores
+ * the retrieved information in data. Release the acquired semaphore
+ * before exiting.
+ **/
+s32 e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ * e1000_read_phy_reg_hv_locked - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired.
+ **/
+s32 e1000_read_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ * e1000_read_phy_reg_page_hv - Read HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Reads the PHY register at offset and stores the retrieved information
+ * in data. Assumes semaphore already acquired and page already set.
+ **/
+s32 e1000_read_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ return __e1000_read_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ * __e1000_write_phy_reg_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ * @locked: semaphore has already been acquired or not
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+static s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
+ bool locked, bool page_set)
+{
+ s32 ret_val;
+ u16 page = BM_PHY_REG_PAGE(offset);
+ u16 reg = BM_PHY_REG_NUM(offset);
+ u32 phy_addr = hw->phy.addr = e1000_get_phy_addr_for_hv_page(page);
+
+ if (!locked) {
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ /* Page 800 works differently than the rest so it has its own func */
+ if (page == BM_WUC_PAGE) {
+ ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
+ false, page_set);
+ goto out;
+ }
+
+ if (page > 0 && page < HV_INTC_FC_PAGE_START) {
+ ret_val = e1000_access_phy_debug_regs_hv(hw, offset,
+ &data, false);
+ goto out;
+ }
+
+ if (!page_set) {
+ if (page == HV_INTC_FC_PAGE_START)
+ page = 0;
+
+ /*
+ * Workaround MDIO accesses being disabled after entering IEEE
+ * Power Down (when bit 11 of the PHY Control register is set)
+ */
+ if ((hw->phy.type == e1000_phy_82578) &&
+ (hw->phy.revision >= 1) &&
+ (hw->phy.addr == 2) &&
+ ((MAX_PHY_REG_ADDRESS & reg) == 0) && (data & (1 << 11))) {
+ u16 data2 = 0x7EFF;
+ ret_val = e1000_access_phy_debug_regs_hv(hw,
+ (1 << 6) | 0x3,
+ &data2, false);
+ if (ret_val)
+ goto out;
+ }
+
+ if (reg > MAX_PHY_MULTI_PAGE_REG) {
+ /* Page is shifted left, PHY expects (page x 32) */
+ ret_val = e1000_set_page_igp(hw,
+ (page << IGP_PAGE_SHIFT));
+
+ hw->phy.addr = phy_addr;
+
+ if (ret_val)
+ goto out;
+ }
+ }
+
+ e_dbg("writing PHY page %d (or 0x%x shifted) reg 0x%x\n", page,
+ page << IGP_PAGE_SHIFT, reg);
+
+ ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & reg,
+ data);
+
+out:
+ if (!locked)
+ hw->phy.ops.release(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_phy_reg_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore then writes the data to PHY register at the offset.
+ * Release the acquired semaphores before exiting.
+ **/
+s32 e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, false, false);
+}
+
+/**
+ * e1000_write_phy_reg_hv_locked - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset. Assumes semaphore
+ * already acquired.
+ **/
+s32 e1000_write_phy_reg_hv_locked(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, true, false);
+}
+
+/**
+ * e1000_write_phy_reg_page_hv - Write HV PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset. Assumes semaphore
+ * already acquired and page already set.
+ **/
+s32 e1000_write_phy_reg_page_hv(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ return __e1000_write_phy_reg_hv(hw, offset, data, true, true);
+}
+
+/**
+ * e1000_get_phy_addr_for_hv_page - Get PHY address based on page
+ * @page: page to be accessed
+ **/
+static u32 e1000_get_phy_addr_for_hv_page(u32 page)
+{
+ u32 phy_addr = 2;
+
+ if (page >= HV_INTC_FC_PAGE_START)
+ phy_addr = 1;
+
+ return phy_addr;
+}
+
+/**
+ * e1000_access_phy_debug_regs_hv - Read HV PHY vendor specific high registers
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read or written
+ * @data: pointer to the data to be read or written
+ * @read: determines if operation is read or write
+ *
+ * Reads the PHY register at offset and stores the retreived information
+ * in data. Assumes semaphore already acquired. Note that the procedure
+ * to access these regs uses the address port and data port to read/write.
+ * These accesses done with PHY address 2 and without using pages.
+ **/
+static s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset,
+ u16 *data, bool read)
+{
+ s32 ret_val;
+ u32 addr_reg = 0;
+ u32 data_reg = 0;
+
+ /* This takes care of the difference with desktop vs mobile phy */
+ addr_reg = (hw->phy.type == e1000_phy_82578) ?
+ I82578_ADDR_REG : I82577_ADDR_REG;
+ data_reg = addr_reg + 1;
+
+ /* All operations in this function are phy address 2 */
+ hw->phy.addr = 2;
+
+ /* masking with 0x3F to remove the page from offset */
+ ret_val = e1000e_write_phy_reg_mdic(hw, addr_reg, (u16)offset & 0x3F);
+ if (ret_val) {
+ e_dbg("Could not write the Address Offset port register\n");
+ goto out;
+ }
+
+ /* Read or write the data value next */
+ if (read)
+ ret_val = e1000e_read_phy_reg_mdic(hw, data_reg, data);
+ else
+ ret_val = e1000e_write_phy_reg_mdic(hw, data_reg, *data);
+
+ if (ret_val) {
+ e_dbg("Could not access the Data port register\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_link_stall_workaround_hv - Si workaround
+ * @hw: pointer to the HW structure
+ *
+ * This function works around a Si bug where the link partner can get
+ * a link up indication before the PHY does. If small packets are sent
+ * by the link partner they can be placed in the packet buffer without
+ * being properly accounted for by the PHY and will stall preventing
+ * further packets from being received. The workaround is to clear the
+ * packet buffer after the PHY detects link up.
+ **/
+s32 e1000_link_stall_workaround_hv(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 data;
+
+ if (hw->phy.type != e1000_phy_82578)
+ goto out;
+
+ /* Do not apply workaround if in PHY loopback bit 14 set */
+ e1e_rphy(hw, PHY_CONTROL, &data);
+ if (data & PHY_CONTROL_LB)
+ goto out;
+
+ /* check if link is up and at 1Gbps */
+ ret_val = e1e_rphy(hw, BM_CS_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ data &= BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_MASK;
+
+ if (data != (BM_CS_STATUS_LINK_UP |
+ BM_CS_STATUS_RESOLVED |
+ BM_CS_STATUS_SPEED_1000))
+ goto out;
+
+ mdelay(200);
+
+ /* flush the packets in the fifo buffer */
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC |
+ HV_MUX_DATA_CTRL_FORCE_SPEED);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1e_wphy(hw, HV_MUX_DATA_CTRL, HV_MUX_DATA_CTRL_GEN_TO_MAC);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_check_polarity_82577 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+s32 e1000_check_polarity_82577(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & I82577_PHY_STATUS2_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * e1000_phy_force_speed_duplex_82577 - Force speed/duplex for I82577 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex.
+ **/
+s32 e1000_phy_force_speed_duplex_82577(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = e1e_rphy(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ e1000e_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ e_dbg("Waiting for forced speed/duplex link on 82577 phy\n");
+
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ e_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = e1000e_phy_has_link_generic(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_phy_info_82577 - Retrieve I82577 PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 e1000_get_phy_info_82577(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = e1000e_phy_has_link_generic(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ e_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = e1000_check_polarity_82577(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1e_rphy(hw, I82577_PHY_STATUS_2, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & I82577_PHY_STATUS2_MDIX) ? true : false;
+
+ if ((data & I82577_PHY_STATUS2_SPEED_MASK) ==
+ I82577_PHY_STATUS2_SPEED_1000MBPS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = e1e_rphy(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_get_cable_length_82577 - Determine cable length for 82577 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 e1000_get_cable_length_82577(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, length;
+
+ ret_val = e1e_rphy(hw, I82577_PHY_DIAG_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ length = (phy_data & I82577_DSTATUS_CABLE_LENGTH) >>
+ I82577_DSTATUS_CABLE_LENGTH_SHIFT;
+
+ if (length == E1000_CABLE_LENGTH_UNDEFINED)
+ ret_val = -E1000_ERR_PHY;
+
+ phy->cable_length = length;
+
+out:
+ return ret_val;
+}
--- /dev/null
+################################################################################
+#
+# Intel 82575 PCI-Express Ethernet Linux driver
+# Copyright(c) 1999 - 2011 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82575 PCI-Express ethernet driver
+#
+
+obj-$(CONFIG_IGB) += igb.o
+
+igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
+ e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_82575
+ * e1000_82576
+ */
+
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+static s32 igb_get_invariants_82575(struct e1000_hw *);
+static s32 igb_acquire_phy_82575(struct e1000_hw *);
+static void igb_release_phy_82575(struct e1000_hw *);
+static s32 igb_acquire_nvm_82575(struct e1000_hw *);
+static void igb_release_nvm_82575(struct e1000_hw *);
+static s32 igb_check_for_link_82575(struct e1000_hw *);
+static s32 igb_get_cfg_done_82575(struct e1000_hw *);
+static s32 igb_init_hw_82575(struct e1000_hw *);
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
+static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
+static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
+static s32 igb_reset_hw_82575(struct e1000_hw *);
+static s32 igb_reset_hw_82580(struct e1000_hw *);
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
+static s32 igb_setup_copper_link_82575(struct e1000_hw *);
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
+ u16 *);
+static s32 igb_get_phy_id_82575(struct e1000_hw *);
+static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
+static bool igb_sgmii_active_82575(struct e1000_hw *);
+static s32 igb_reset_init_script_82575(struct e1000_hw *);
+static s32 igb_read_mac_addr_82575(struct e1000_hw *);
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw,
+ u16 offset);
+static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
+ u16 offset);
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
+static const u16 e1000_82580_rxpbs_table[] =
+ { 36, 72, 144, 1, 2, 4, 8, 16,
+ 35, 70, 140 };
+#define E1000_82580_RXPBS_TABLE_SIZE \
+ (sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
+
+/**
+ * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
+ * @hw: pointer to the HW structure
+ *
+ * Called to determine if the I2C pins are being used for I2C or as an
+ * external MDIO interface since the two options are mutually exclusive.
+ **/
+static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
+{
+ u32 reg = 0;
+ bool ext_mdio = false;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ reg = rd32(E1000_MDIC);
+ ext_mdio = !!(reg & E1000_MDIC_DEST);
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ reg = rd32(E1000_MDICNFG);
+ ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
+ break;
+ default:
+ break;
+ }
+ return ext_mdio;
+}
+
+static s32 igb_get_invariants_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
+ u32 eecd;
+ s32 ret_val;
+ u16 size;
+ u32 ctrl_ext = 0;
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575EB_COPPER:
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ mac->type = e1000_82575;
+ break;
+ case E1000_DEV_ID_82576:
+ case E1000_DEV_ID_82576_NS:
+ case E1000_DEV_ID_82576_NS_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ case E1000_DEV_ID_82576_SERDES_QUAD:
+ mac->type = e1000_82576;
+ break;
+ case E1000_DEV_ID_82580_COPPER:
+ case E1000_DEV_ID_82580_FIBER:
+ case E1000_DEV_ID_82580_QUAD_FIBER:
+ case E1000_DEV_ID_82580_SERDES:
+ case E1000_DEV_ID_82580_SGMII:
+ case E1000_DEV_ID_82580_COPPER_DUAL:
+ case E1000_DEV_ID_DH89XXCC_SGMII:
+ case E1000_DEV_ID_DH89XXCC_SERDES:
+ case E1000_DEV_ID_DH89XXCC_BACKPLANE:
+ case E1000_DEV_ID_DH89XXCC_SFP:
+ mac->type = e1000_82580;
+ break;
+ case E1000_DEV_ID_I350_COPPER:
+ case E1000_DEV_ID_I350_FIBER:
+ case E1000_DEV_ID_I350_SERDES:
+ case E1000_DEV_ID_I350_SGMII:
+ mac->type = e1000_i350;
+ break;
+ default:
+ return -E1000_ERR_MAC_INIT;
+ break;
+ }
+
+ /* Set media type */
+ /*
+ * The 82575 uses bits 22:23 for link mode. The mode can be changed
+ * based on the EEPROM. We cannot rely upon device ID. There
+ * is no distinguishable difference between fiber and internal
+ * SerDes mode on the 82575. There can be an external PHY attached
+ * on the SGMII interface. For this, we'll set sgmii_active to true.
+ */
+ phy->media_type = e1000_media_type_copper;
+ dev_spec->sgmii_active = false;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ dev_spec->sgmii_active = true;
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ break;
+ default:
+ break;
+ }
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
+ if (mac->type == e1000_82576)
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
+ if (mac->type == e1000_82580)
+ mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
+ if (mac->type == e1000_i350)
+ mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
+ /* reset */
+ if (mac->type >= e1000_82580)
+ mac->ops.reset_hw = igb_reset_hw_82580;
+ else
+ mac->ops.reset_hw = igb_reset_hw_82575;
+ /* Set if part includes ASF firmware */
+ mac->asf_firmware_present = true;
+ /* Set if manageability features are enabled. */
+ mac->arc_subsystem_valid =
+ (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
+ ? true : false;
+ /* enable EEE on i350 parts */
+ if (mac->type == e1000_i350)
+ dev_spec->eee_disable = false;
+ else
+ dev_spec->eee_disable = true;
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface =
+ (hw->phy.media_type == e1000_media_type_copper)
+ ? igb_setup_copper_link_82575
+ : igb_setup_serdes_link_82575;
+
+ /* NVM initialization */
+ eecd = rd32(E1000_EECD);
+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+
+ nvm->type = e1000_nvm_eeprom_spi;
+
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+
+ /*
+ * Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /*
+ * Check for invalid size
+ */
+ if ((hw->mac.type == e1000_82576) && (size > 15)) {
+ printk("igb: The NVM size is not valid, "
+ "defaulting to 32K.\n");
+ size = 15;
+ }
+ nvm->word_size = 1 << size;
+ if (nvm->word_size == (1 << 15))
+ nvm->page_size = 128;
+
+ /* NVM Function Pointers */
+ nvm->ops.acquire = igb_acquire_nvm_82575;
+ if (nvm->word_size < (1 << 15))
+ nvm->ops.read = igb_read_nvm_eerd;
+ else
+ nvm->ops.read = igb_read_nvm_spi;
+
+ nvm->ops.release = igb_release_nvm_82575;
+ switch (hw->mac.type) {
+ case e1000_82580:
+ nvm->ops.validate = igb_validate_nvm_checksum_82580;
+ nvm->ops.update = igb_update_nvm_checksum_82580;
+ break;
+ case e1000_i350:
+ nvm->ops.validate = igb_validate_nvm_checksum_i350;
+ nvm->ops.update = igb_update_nvm_checksum_i350;
+ break;
+ default:
+ nvm->ops.validate = igb_validate_nvm_checksum;
+ nvm->ops.update = igb_update_nvm_checksum;
+ }
+ nvm->ops.write = igb_write_nvm_spi;
+
+ /* if part supports SR-IOV then initialize mailbox parameters */
+ switch (mac->type) {
+ case e1000_82576:
+ case e1000_i350:
+ igb_init_mbx_params_pf(hw);
+ break;
+ default:
+ break;
+ }
+
+ /* setup PHY parameters */
+ if (phy->media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ return 0;
+ }
+
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ /* PHY function pointers */
+ if (igb_sgmii_active_82575(hw)) {
+ phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
+ ctrl_ext |= E1000_CTRL_I2C_ENA;
+ } else {
+ phy->ops.reset = igb_phy_hw_reset;
+ ctrl_ext &= ~E1000_CTRL_I2C_ENA;
+ }
+
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+ igb_reset_mdicnfg_82580(hw);
+
+ if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
+ phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
+ phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
+ } else if (hw->mac.type >= e1000_82580) {
+ phy->ops.read_reg = igb_read_phy_reg_82580;
+ phy->ops.write_reg = igb_write_phy_reg_82580;
+ } else {
+ phy->ops.read_reg = igb_read_phy_reg_igp;
+ phy->ops.write_reg = igb_write_phy_reg_igp;
+ }
+
+ /* set lan id */
+ hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
+ E1000_STATUS_FUNC_SHIFT;
+
+ /* Set phy->phy_addr and phy->id. */
+ ret_val = igb_get_phy_id_82575(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* Verify phy id and set remaining function pointers */
+ switch (phy->id) {
+ case I347AT4_E_PHY_ID:
+ case M88E1112_E_PHY_ID:
+ case M88E1111_I_PHY_ID:
+ phy->type = e1000_phy_m88;
+ phy->ops.get_phy_info = igb_get_phy_info_m88;
+
+ if (phy->id == I347AT4_E_PHY_ID ||
+ phy->id == M88E1112_E_PHY_ID)
+ phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
+ else
+ phy->ops.get_cable_length = igb_get_cable_length_m88;
+
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
+ break;
+ case IGP03E1000_E_PHY_ID:
+ phy->type = e1000_phy_igp_3;
+ phy->ops.get_phy_info = igb_get_phy_info_igp;
+ phy->ops.get_cable_length = igb_get_cable_length_igp_2;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
+ phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
+ phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
+ break;
+ case I82580_I_PHY_ID:
+ case I350_I_PHY_ID:
+ phy->type = e1000_phy_82580;
+ phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
+ phy->ops.get_cable_length = igb_get_cable_length_82580;
+ phy->ops.get_phy_info = igb_get_phy_info_82580;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_acquire_phy_82575 - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * Acquire access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ return igb_acquire_swfw_sync_82575(hw, mask);
+}
+
+/**
+ * igb_release_phy_82575 - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ **/
+static void igb_release_phy_82575(struct e1000_hw *hw)
+{
+ u16 mask = E1000_SWFW_PHY0_SM;
+
+ if (hw->bus.func == E1000_FUNC_1)
+ mask = E1000_SWFW_PHY1_SM;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_SWFW_PHY2_SM;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_SWFW_PHY3_SM;
+
+ igb_release_swfw_sync_82575(hw, mask);
+}
+
+/**
+ * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the serial gigabit media independent
+ * interface and stores the retrieved information in data.
+ **/
+static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 *data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %u is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the serial gigabit
+ * media independent interface.
+ **/
+static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
+ u16 data)
+{
+ s32 ret_val = -E1000_ERR_PARAM;
+
+
+ if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ goto out;
+ }
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_i2c(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_id_82575 - Retrieve PHY addr and id
+ * @hw: pointer to the HW structure
+ *
+ * Retrieves the PHY address and ID for both PHY's which do and do not use
+ * sgmi interface.
+ **/
+static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+ u32 ctrl_ext;
+ u32 mdic;
+
+ /*
+ * For SGMII PHYs, we try the list of possible addresses until
+ * we find one that works. For non-SGMII PHYs
+ * (e.g. integrated copper PHYs), an address of 1 should
+ * work. The result of this function should mean phy->phy_addr
+ * and phy->id are set correctly.
+ */
+ if (!(igb_sgmii_active_82575(hw))) {
+ phy->addr = 1;
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ if (igb_sgmii_uses_mdio_82575(hw)) {
+ switch (hw->mac.type) {
+ case e1000_82575:
+ case e1000_82576:
+ mdic = rd32(E1000_MDIC);
+ mdic &= E1000_MDIC_PHY_MASK;
+ phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ mdic = rd32(E1000_MDICNFG);
+ mdic &= E1000_MDICNFG_PHY_MASK;
+ phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ break;
+ }
+ ret_val = igb_get_phy_id(hw);
+ goto out;
+ }
+
+ /* Power on sgmii phy if it is disabled */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
+ wrfl();
+ msleep(300);
+
+ /*
+ * The address field in the I2CCMD register is 3 bits and 0 is invalid.
+ * Therefore, we need to test 1-7
+ */
+ for (phy->addr = 1; phy->addr < 8; phy->addr++) {
+ ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
+ if (ret_val == 0) {
+ hw_dbg("Vendor ID 0x%08X read at address %u\n",
+ phy_id, phy->addr);
+ /*
+ * At the time of this writing, The M88 part is
+ * the only supported SGMII PHY product.
+ */
+ if (phy_id == M88_VENDOR)
+ break;
+ } else {
+ hw_dbg("PHY address %u was unreadable\n", phy->addr);
+ }
+ }
+
+ /* A valid PHY type couldn't be found. */
+ if (phy->addr == 8) {
+ phy->addr = 0;
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ } else {
+ ret_val = igb_get_phy_id(hw);
+ }
+
+ /* restore previous sfp cage power state */
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
+ * @hw: pointer to the HW structure
+ *
+ * Resets the PHY using the serial gigabit media independent interface.
+ **/
+static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ /*
+ * This isn't a true "hard" reset, but is the only reset
+ * available to us at this time.
+ */
+
+ hw_dbg("Soft resetting SGMII attached PHY...\n");
+
+ /*
+ * SFP documentation requires the following to configure the SPF module
+ * to work on SGMII. No further documentation is given.
+ */
+ ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_phy_sw_reset(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When
+ * activating LPLU this function also disables smart speed
+ * and vice versa. LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_acquire_nvm_82575 - Request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the necessary semaphores for exclusive access to the EEPROM.
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_acquire_nvm(hw);
+
+ if (ret_val)
+ igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_nvm_82575 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit,
+ * then release the semaphores acquired.
+ **/
+static void igb_release_nvm_82575(struct e1000_hw *hw)
+{
+ igb_release_nvm(hw);
+ igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
+}
+
+/**
+ * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
+ * will also specify which port we're acquiring the lock for.
+ **/
+static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 16;
+ s32 ret_val = 0;
+ s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
+
+ while (i < timeout) {
+ if (igb_get_hw_semaphore(hw)) {
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask)))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask)
+ * or other software thread using resource (swmask)
+ */
+ igb_put_hw_semaphore(hw);
+ mdelay(5);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
+ ret_val = -E1000_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ swfw_sync |= swmask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_release_swfw_sync_82575 - Release SW/FW semaphore
+ * @hw: pointer to the HW structure
+ * @mask: specifies which semaphore to acquire
+ *
+ * Release the SW/FW semaphore used to access the PHY or NVM. The mask
+ * will also specify which port we're releasing the lock for.
+ **/
+static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+
+ while (igb_get_hw_semaphore(hw) != 0);
+ /* Empty */
+
+ swfw_sync = rd32(E1000_SW_FW_SYNC);
+ swfw_sync &= ~mask;
+ wr32(E1000_SW_FW_SYNC, swfw_sync);
+
+ igb_put_hw_semaphore(hw);
+}
+
+/**
+ * igb_get_cfg_done_82575 - Read config done bit
+ * @hw: pointer to the HW structure
+ *
+ * Read the management control register for the config done bit for
+ * completion status. NOTE: silicon which is EEPROM-less will fail trying
+ * to read the config done bit, so an error is *ONLY* logged and returns
+ * 0. If we were to return with error, EEPROM-less silicon
+ * would not be able to be reset or change link.
+ **/
+static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+ s32 ret_val = 0;
+ u32 mask = E1000_NVM_CFG_DONE_PORT_0;
+
+ if (hw->bus.func == 1)
+ mask = E1000_NVM_CFG_DONE_PORT_1;
+ else if (hw->bus.func == E1000_FUNC_2)
+ mask = E1000_NVM_CFG_DONE_PORT_2;
+ else if (hw->bus.func == E1000_FUNC_3)
+ mask = E1000_NVM_CFG_DONE_PORT_3;
+
+ while (timeout) {
+ if (rd32(E1000_EEMNGCTL) & mask)
+ break;
+ msleep(1);
+ timeout--;
+ }
+ if (!timeout)
+ hw_dbg("MNG configuration cycle has not completed.\n");
+
+ /* If EEPROM is not marked present, init the PHY manually */
+ if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
+ (hw->phy.type == e1000_phy_igp_3))
+ igb_phy_init_script_igp3(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_link_82575 - Check for link
+ * @hw: pointer to the HW structure
+ *
+ * If sgmii is enabled, then use the pcs register to determine link, otherwise
+ * use the generic interface for determining link.
+ **/
+static s32 igb_check_for_link_82575(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 speed, duplex;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
+ &duplex);
+ /*
+ * Use this flag to determine if link needs to be checked or
+ * not. If we have link clear the flag so that we do not
+ * continue to check for link.
+ */
+ hw->mac.get_link_status = !hw->mac.serdes_has_link;
+ } else {
+ ret_val = igb_check_for_copper_link(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
+ * @hw: pointer to the HW structure
+ **/
+void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return;
+
+ /* Enable PCS to turn on link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg |= E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* Power up the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ msleep(1);
+}
+
+/**
+ * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Using the physical coding sub-layer (PCS), retrieve the current speed and
+ * duplex, then store the values in the pointers provided.
+ **/
+static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 pcs;
+
+ /* Set up defaults for the return values of this function */
+ mac->serdes_has_link = false;
+ *speed = 0;
+ *duplex = 0;
+
+ /*
+ * Read the PCS Status register for link state. For non-copper mode,
+ * the status register is not accurate. The PCS status register is
+ * used instead.
+ */
+ pcs = rd32(E1000_PCS_LSTAT);
+
+ /*
+ * The link up bit determines when link is up on autoneg. The sync ok
+ * gets set once both sides sync up and agree upon link. Stable link
+ * can be determined by checking for both link up and link sync ok
+ */
+ if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
+ mac->serdes_has_link = true;
+
+ /* Detect and store PCS speed */
+ if (pcs & E1000_PCS_LSTS_SPEED_1000) {
+ *speed = SPEED_1000;
+ } else if (pcs & E1000_PCS_LSTS_SPEED_100) {
+ *speed = SPEED_100;
+ } else {
+ *speed = SPEED_10;
+ }
+
+ /* Detect and store PCS duplex */
+ if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
+ *duplex = FULL_DUPLEX;
+ } else {
+ *duplex = HALF_DUPLEX;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * igb_shutdown_serdes_link_82575 - Remove link during power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of fiber serdes, shut down optics and PCS on driver unload
+ * when management pass thru is not enabled.
+ **/
+void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ if (hw->phy.media_type != e1000_media_type_internal_serdes &&
+ igb_sgmii_active_82575(hw))
+ return;
+
+ if (!igb_enable_mng_pass_thru(hw)) {
+ /* Disable PCS to turn off link */
+ reg = rd32(E1000_PCS_CFG0);
+ reg &= ~E1000_PCS_CFG_PCS_EN;
+ wr32(E1000_PCS_CFG0, reg);
+
+ /* shutdown the laser */
+ reg = rd32(E1000_CTRL_EXT);
+ reg |= E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, reg);
+
+ /* flush the write to verify completion */
+ wrfl();
+ msleep(1);
+ }
+}
+
+/**
+ * igb_reset_hw_82575 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32 igb_reset_hw_82575(struct e1000_hw *hw)
+{
+ u32 ctrl, icr;
+ s32 ret_val;
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ /* set the completion timeout for interface */
+ ret_val = igb_set_pcie_completion_timeout(hw);
+ if (ret_val) {
+ hw_dbg("PCI-E Set completion timeout has failed.\n");
+ }
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ msleep(10);
+
+ ctrl = rd32(E1000_CTRL);
+
+ hw_dbg("Issuing a global reset to MAC\n");
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ icr = rd32(E1000_ICR);
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_init_hw_82575 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 igb_init_hw_82575(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ /* Initialize identification LED */
+ ret_val = igb_id_led_init(hw);
+ if (ret_val) {
+ hw_dbg("Error initializing identification LED\n");
+ /* This is not fatal and we should not stop init due to this */
+ }
+
+ /* Disabling VLAN filtering */
+ hw_dbg("Initializing the IEEE VLAN\n");
+ igb_clear_vfta(hw);
+
+ /* Setup the receive address */
+ igb_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ hw_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(E1000_MTA, i, 0);
+
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igb_setup_link(hw);
+
+ /*
+ * Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igb_clear_hw_cntrs_82575(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link_82575 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ wr32(E1000_CTRL, ctrl);
+
+ ret_val = igb_setup_serdes_link_82575(hw);
+ if (ret_val)
+ goto out;
+
+ if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
+ /* allow time for SFP cage time to power up phy */
+ msleep(300);
+
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ if (hw->phy.id == I347AT4_E_PHY_ID ||
+ hw->phy.id == M88E1112_E_PHY_ID)
+ ret_val = igb_copper_link_setup_m88_gen2(hw);
+ else
+ ret_val = igb_copper_link_setup_m88(hw);
+ break;
+ case e1000_phy_igp_3:
+ ret_val = igb_copper_link_setup_igp(hw);
+ break;
+ case e1000_phy_82580:
+ ret_val = igb_copper_link_setup_82580(hw);
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_setup_copper_link(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_serdes_link_82575 - Setup link for serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configure the physical coding sub-layer (PCS) link. The PCS link is
+ * used on copper connections where the serialized gigabit media independent
+ * interface (sgmii), or serdes fiber is being used. Configures the link
+ * for auto-negotiation or forces speed/duplex.
+ **/
+static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
+{
+ u32 ctrl_ext, ctrl_reg, reg;
+ bool pcs_autoneg;
+ s32 ret_val = E1000_SUCCESS;
+ u16 data;
+
+ if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
+ !igb_sgmii_active_82575(hw))
+ return ret_val;
+
+
+ /*
+ * On the 82575, SerDes loopback mode persists until it is
+ * explicitly turned off or a power cycle is performed. A read to
+ * the register does not indicate its status. Therefore, we ensure
+ * loopback mode is disabled during initialization.
+ */
+ wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+
+ /* power on the sfp cage if present */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg |= E1000_CTRL_SLU;
+
+ if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
+ /* set both sw defined pins */
+ ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
+
+ /* Set switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg |= E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+ }
+
+ reg = rd32(E1000_PCS_LCTL);
+
+ /* default pcs_autoneg to the same setting as mac autoneg */
+ pcs_autoneg = hw->mac.autoneg;
+
+ switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ case E1000_CTRL_EXT_LINK_MODE_SGMII:
+ /* sgmii mode lets the phy handle forcing speed/duplex */
+ pcs_autoneg = true;
+ /* autoneg time out should be disabled for SGMII mode */
+ reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
+ break;
+ case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
+ /* disable PCS autoneg and support parallel detect only */
+ pcs_autoneg = false;
+ default:
+ if (hw->mac.type == e1000_82575 ||
+ hw->mac.type == e1000_82576) {
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
+ if (ret_val) {
+ printk(KERN_DEBUG "NVM Read Error\n\n");
+ return ret_val;
+ }
+
+ if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
+ pcs_autoneg = false;
+ }
+
+ /*
+ * non-SGMII modes only supports a speed of 1000/Full for the
+ * link so it is best to just force the MAC and let the pcs
+ * link either autoneg or be forced to 1000/Full
+ */
+ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
+ E1000_CTRL_FD | E1000_CTRL_FRCDPX;
+
+ /* set speed of 1000/Full if speed/duplex is forced */
+ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
+ break;
+ }
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /*
+ * New SerDes mode allows for forcing speed or autonegotiating speed
+ * at 1gb. Autoneg should be default set by most drivers. This is the
+ * mode that will be compatible with older link partners and switches.
+ * However, both are supported by the hardware and some drivers/tools.
+ */
+ reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
+ E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
+
+ /*
+ * We force flow control to prevent the CTRL register values from being
+ * overwritten by the autonegotiated flow control values
+ */
+ reg |= E1000_PCS_LCTL_FORCE_FCTRL;
+
+ if (pcs_autoneg) {
+ /* Set PCS register for autoneg */
+ reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+ E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
+ hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
+ } else {
+ /* Set PCS register for forced link */
+ reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
+
+ hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
+ }
+
+ wr32(E1000_PCS_LCTL, reg);
+
+ if (!igb_sgmii_active_82575(hw))
+ igb_force_mac_fc(hw);
+
+ return ret_val;
+}
+
+/**
+ * igb_sgmii_active_82575 - Return sgmii state
+ * @hw: pointer to the HW structure
+ *
+ * 82575 silicon has a serialized gigabit media independent interface (sgmii)
+ * which can be enabled for use in the embedded applications. Simply
+ * return the current state of the sgmii interface.
+ **/
+static bool igb_sgmii_active_82575(struct e1000_hw *hw)
+{
+ struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
+ return dev_spec->sgmii_active;
+}
+
+/**
+ * igb_reset_init_script_82575 - Inits HW defaults after reset
+ * @hw: pointer to the HW structure
+ *
+ * Inits recommended HW defaults after a reset when there is no EEPROM
+ * detected. This is only for the 82575.
+ **/
+static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
+{
+ if (hw->mac.type == e1000_82575) {
+ hw_dbg("Running reset init script for 82575\n");
+ /* SerDes configuration via SERDESCTRL */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
+
+ /* CCM configuration via CCMCTL register */
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
+
+ /* PCIe lanes configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
+ igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
+
+ /* PCIe PLL Configuration */
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
+ igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_mac_addr_82575 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /*
+ * If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = igb_check_alt_mac_addr(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_mac_addr(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_power_down_phy_copper_82575 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
+ igb_power_down_phy_copper(hw);
+}
+
+/**
+ * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
+{
+ igb_clear_hw_cntrs_base(hw);
+
+ rd32(E1000_PRC64);
+ rd32(E1000_PRC127);
+ rd32(E1000_PRC255);
+ rd32(E1000_PRC511);
+ rd32(E1000_PRC1023);
+ rd32(E1000_PRC1522);
+ rd32(E1000_PTC64);
+ rd32(E1000_PTC127);
+ rd32(E1000_PTC255);
+ rd32(E1000_PTC511);
+ rd32(E1000_PTC1023);
+ rd32(E1000_PTC1522);
+
+ rd32(E1000_ALGNERRC);
+ rd32(E1000_RXERRC);
+ rd32(E1000_TNCRS);
+ rd32(E1000_CEXTERR);
+ rd32(E1000_TSCTC);
+ rd32(E1000_TSCTFC);
+
+ rd32(E1000_MGTPRC);
+ rd32(E1000_MGTPDC);
+ rd32(E1000_MGTPTC);
+
+ rd32(E1000_IAC);
+ rd32(E1000_ICRXOC);
+
+ rd32(E1000_ICRXPTC);
+ rd32(E1000_ICRXATC);
+ rd32(E1000_ICTXPTC);
+ rd32(E1000_ICTXATC);
+ rd32(E1000_ICTXQEC);
+ rd32(E1000_ICTXQMTC);
+ rd32(E1000_ICRXDMTC);
+
+ rd32(E1000_CBTMPC);
+ rd32(E1000_HTDPMC);
+ rd32(E1000_CBRMPC);
+ rd32(E1000_RPTHC);
+ rd32(E1000_HGPTC);
+ rd32(E1000_HTCBDPC);
+ rd32(E1000_HGORCL);
+ rd32(E1000_HGORCH);
+ rd32(E1000_HGOTCL);
+ rd32(E1000_HGOTCH);
+ rd32(E1000_LENERRS);
+
+ /* This register should not be read in copper configurations */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes ||
+ igb_sgmii_active_82575(hw))
+ rd32(E1000_SCVPC);
+}
+
+/**
+ * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
+ * @hw: pointer to the HW structure
+ *
+ * After rx enable if managability is enabled then there is likely some
+ * bad data at the start of the fifo and possibly in the DMA fifo. This
+ * function clears the fifos and flushes any packets that came in as rx was
+ * being enabled.
+ **/
+void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
+{
+ u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+ int i, ms_wait;
+
+ if (hw->mac.type != e1000_82575 ||
+ !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
+ return;
+
+ /* Disable all RX queues */
+ for (i = 0; i < 4; i++) {
+ rxdctl[i] = rd32(E1000_RXDCTL(i));
+ wr32(E1000_RXDCTL(i),
+ rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
+ }
+ /* Poll all queues to verify they have shut down */
+ for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+ msleep(1);
+ rx_enabled = 0;
+ for (i = 0; i < 4; i++)
+ rx_enabled |= rd32(E1000_RXDCTL(i));
+ if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
+ break;
+ }
+
+ if (ms_wait == 10)
+ hw_dbg("Queue disable timed out after 10ms\n");
+
+ /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+ * incoming packets are rejected. Set enable and wait 2ms so that
+ * any packet that was coming in as RCTL.EN was set is flushed
+ */
+ rfctl = rd32(E1000_RFCTL);
+ wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
+
+ rlpml = rd32(E1000_RLPML);
+ wr32(E1000_RLPML, 0);
+
+ rctl = rd32(E1000_RCTL);
+ temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
+ temp_rctl |= E1000_RCTL_LPE;
+
+ wr32(E1000_RCTL, temp_rctl);
+ wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
+ wrfl();
+ msleep(2);
+
+ /* Enable RX queues that were previously enabled and restore our
+ * previous state
+ */
+ for (i = 0; i < 4; i++)
+ wr32(E1000_RXDCTL(i), rxdctl[i]);
+ wr32(E1000_RCTL, rctl);
+ wrfl();
+
+ wr32(E1000_RLPML, rlpml);
+ wr32(E1000_RFCTL, rfctl);
+
+ /* Flush receive errors generated by workaround */
+ rd32(E1000_ROC);
+ rd32(E1000_RNBC);
+ rd32(E1000_MPC);
+}
+
+/**
+ * igb_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 200ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
+{
+ u32 gcr = rd32(E1000_GCR);
+ s32 ret_val = 0;
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 200ms through the GCR register
+ */
+ if (!(gcr & E1000_GCR_CAP_VER2)) {
+ gcr |= E1000_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+ if (ret_val)
+ goto out;
+
+ pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
+
+ ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
+ &pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
+
+ wr32(E1000_GCR, gcr);
+ return ret_val;
+}
+
+/**
+ * igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ * @pf: Physical Function pool - do not set anti-spoofing for the PF
+ *
+ * enables/disables L2 switch anti-spoofing functionality.
+ **/
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
+{
+ u32 dtxswc;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ dtxswc = rd32(E1000_DTXSWC);
+ if (enable) {
+ dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ /* The PF can spoof - it has to in order to
+ * support emulation mode NICs */
+ dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
+ } else {
+ dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
+ E1000_DTXSWC_VLAN_SPOOF_MASK);
+ }
+ wr32(E1000_DTXSWC, dtxswc);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables L2 switch loopback functionality.
+ **/
+void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 dtxswc = rd32(E1000_DTXSWC);
+
+ if (enable)
+ dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+ else
+ dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
+
+ wr32(E1000_DTXSWC, dtxswc);
+}
+
+/**
+ * igb_vmdq_set_replication_pf - enable or disable vmdq replication
+ * @hw: pointer to the hardware struct
+ * @enable: state to enter, either enabled or disabled
+ *
+ * enables/disables replication of packets across multiple pools.
+ **/
+void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
+{
+ u32 vt_ctl = rd32(E1000_VT_CTL);
+
+ if (enable)
+ vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
+ else
+ vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
+
+ wr32(E1000_VT_CTL, vt_ctl);
+}
+
+/**
+ * igb_read_phy_reg_82580 - Read 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control register in the PHY at offset and stores the
+ * information read to data.
+ **/
+static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_read_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_82580 - Write 82580 MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val;
+
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_write_phy_reg_mdic(hw, offset, data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
+ * @hw: pointer to the HW structure
+ *
+ * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
+ * the values found in the EEPROM. This addresses an issue in which these
+ * bits are not restored from EEPROM after reset.
+ **/
+static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 mdicnfg;
+ u16 nvm_data = 0;
+
+ if (hw->mac.type != e1000_82580)
+ goto out;
+ if (!igb_sgmii_active_82575(hw))
+ goto out;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ mdicnfg = rd32(E1000_MDICNFG);
+ if (nvm_data & NVM_WORD24_EXT_MDIO)
+ mdicnfg |= E1000_MDICNFG_EXT_MDIO;
+ if (nvm_data & NVM_WORD24_COM_MDIO)
+ mdicnfg |= E1000_MDICNFG_COM_MDIO;
+ wr32(E1000_MDICNFG, mdicnfg);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_reset_hw_82580 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets function or entire device (all ports, etc.)
+ * to a known state.
+ **/
+static s32 igb_reset_hw_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ /* BH SW mailbox bit in SW_FW_SYNC */
+ u16 swmbsw_mask = E1000_SW_SYNCH_MB;
+ u32 ctrl, icr;
+ bool global_device_reset = hw->dev_spec._82575.global_device_reset;
+
+
+ hw->dev_spec._82575.global_device_reset = false;
+
+ /* Get current control state. */
+ ctrl = rd32(E1000_CTRL);
+
+ /*
+ * Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igb_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed.\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(E1000_IMC, 0xffffffff);
+ wr32(E1000_RCTL, 0);
+ wr32(E1000_TCTL, E1000_TCTL_PSP);
+ wrfl();
+
+ msleep(10);
+
+ /* Determine whether or not a global dev reset is requested */
+ if (global_device_reset &&
+ igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
+ global_device_reset = false;
+
+ if (global_device_reset &&
+ !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
+ ctrl |= E1000_CTRL_DEV_RST;
+ else
+ ctrl |= E1000_CTRL_RST;
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ /* Add delay to insure DEV_RST has time to complete */
+ if (global_device_reset)
+ msleep(5);
+
+ ret_val = igb_get_auto_rd_done(hw);
+ if (ret_val) {
+ /*
+ * When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* If EEPROM is not present, run manual init scripts */
+ if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
+ igb_reset_init_script_82575(hw);
+
+ /* clear global device reset status bit */
+ wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
+
+ /* Clear any pending interrupt events. */
+ wr32(E1000_IMC, 0xffffffff);
+ icr = rd32(E1000_ICR);
+
+ ret_val = igb_reset_mdicnfg_82580(hw);
+ if (ret_val)
+ hw_dbg("Could not reset MDICNFG based on EEPROM\n");
+
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = igb_check_alt_mac_addr(hw);
+
+ /* Release semaphore */
+ if (global_device_reset)
+ igb_release_swfw_sync_82575(hw, swmbsw_mask);
+
+ return ret_val;
+}
+
+/**
+ * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
+ * @data: data received by reading RXPBS register
+ *
+ * The 82580 uses a table based approach for packet buffer allocation sizes.
+ * This function converts the retrieved value into the correct table value
+ * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
+ * 0x0 36 72 144 1 2 4 8 16
+ * 0x8 35 70 140 rsv rsv rsv rsv rsv
+ */
+u16 igb_rxpbs_adjust_82580(u32 data)
+{
+ u16 ret_val = 0;
+
+ if (data < E1000_82580_RXPBS_TABLE_SIZE)
+ ret_val = e1000_82580_rxpbs_table[data];
+
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_with_offset - Validate EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_with_offset - Update EEPROM
+ * checksum
+ * @hw: pointer to the HW structure
+ * @offset: offset in words of the checksum protected region
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
+ &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 eeprom_regions_count = 1;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
+ /* if checksums compatibility bit is set validate checksums
+ * for all 4 ports. */
+ eeprom_regions_count = 4;
+ }
+
+ for (j = 0; j < eeprom_regions_count; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_82580 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 j, nvm_data;
+ u16 nvm_offset;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum"
+ " compatibility bit.\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
+ /* set compatibility bit to validate checksums appropriately */
+ nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
+ ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
+ &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Write Error while updating checksum"
+ " compatibility bit.\n");
+ goto out;
+ }
+ }
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM section checksum by reading/adding each word of
+ * the EEPROM and then verifies that the sum of the EEPROM is
+ * equal to 0xBABA.
+ **/
+static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_validate_nvm_checksum_with_offset(hw,
+ nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum_i350 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM section checksums for all 4 ports by reading/adding
+ * each word of the EEPROM up to the checksum. Then calculates the EEPROM
+ * checksum and writes the value to the EEPROM.
+ **/
+static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 j;
+ u16 nvm_offset;
+
+ for (j = 0; j < 4; j++) {
+ nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
+ ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
+ if (ret_val != 0)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_set_eee_i350 - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ *
+ * Enable/disable EEE based on setting in dev_spec structure.
+ *
+ **/
+s32 igb_set_eee_i350(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 ipcnfg, eeer, ctrl_ext;
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ if ((hw->mac.type != e1000_i350) ||
+ (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK))
+ goto out;
+ ipcnfg = rd32(E1000_IPCNFG);
+ eeer = rd32(E1000_EEER);
+
+ /* enable or disable per user setting */
+ if (!(hw->dev_spec._82575.eee_disable)) {
+ ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
+ E1000_IPCNFG_EEE_100M_AN);
+ eeer |= (E1000_EEER_TX_LPI_EN |
+ E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+
+ } else {
+ ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
+ E1000_IPCNFG_EEE_100M_AN);
+ eeer &= ~(E1000_EEER_TX_LPI_EN |
+ E1000_EEER_RX_LPI_EN |
+ E1000_EEER_LPI_FC);
+ }
+ wr32(E1000_IPCNFG, ipcnfg);
+ wr32(E1000_EEER, eeer);
+out:
+
+ return ret_val;
+}
+
+static struct e1000_mac_operations e1000_mac_ops_82575 = {
+ .init_hw = igb_init_hw_82575,
+ .check_for_link = igb_check_for_link_82575,
+ .rar_set = igb_rar_set,
+ .read_mac_addr = igb_read_mac_addr_82575,
+ .get_speed_and_duplex = igb_get_speed_and_duplex_copper,
+};
+
+static struct e1000_phy_operations e1000_phy_ops_82575 = {
+ .acquire = igb_acquire_phy_82575,
+ .get_cfg_done = igb_get_cfg_done_82575,
+ .release = igb_release_phy_82575,
+};
+
+static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
+ .acquire = igb_acquire_nvm_82575,
+ .read = igb_read_nvm_eerd,
+ .release = igb_release_nvm_82575,
+ .write = igb_write_nvm_spi,
+};
+
+const struct e1000_info e1000_82575_info = {
+ .get_invariants = igb_get_invariants_82575,
+ .mac_ops = &e1000_mac_ops_82575,
+ .phy_ops = &e1000_phy_ops_82575,
+ .nvm_ops = &e1000_nvm_ops_82575,
+};
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_82575_H_
+#define _E1000_82575_H_
+
+extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
+extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
+extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
+
+#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
+ (ID_LED_DEF1_DEF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_OFF1_ON2))
+
+#define E1000_RAR_ENTRIES_82575 16
+#define E1000_RAR_ENTRIES_82576 24
+#define E1000_RAR_ENTRIES_82580 24
+#define E1000_RAR_ENTRIES_I350 32
+
+#define E1000_SW_SYNCH_MB 0x00000100
+#define E1000_STAT_DEV_RST_SET 0x00100000
+#define E1000_CTRL_DEV_RST 0x20000000
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+#define E1000_SRRCTL_TIMESTAMP 0x40000000
+
+#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
+#define E1000_MRQC_ENABLE_VMDQ 0x00000003
+#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
+#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
+
+#define E1000_EICR_TX_QUEUE ( \
+ E1000_EICR_TX_QUEUE0 | \
+ E1000_EICR_TX_QUEUE1 | \
+ E1000_EICR_TX_QUEUE2 | \
+ E1000_EICR_TX_QUEUE3)
+
+#define E1000_EICR_RX_QUEUE ( \
+ E1000_EICR_RX_QUEUE0 | \
+ E1000_EICR_RX_QUEUE1 | \
+ E1000_EICR_RX_QUEUE2 | \
+ E1000_EICR_RX_QUEUE3)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ struct {
+ __le16 pkt_info; /* RSS type, Packet type */
+ __le16 hdr_info; /* Split Header,
+ * header buffer length */
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
+#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
+/* IPSec Encrypt Enable for ESP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+/* Adv ctxt IPSec SA IDX mask */
+/* Adv ctxt IPSec ESP len mask */
+
+/* Additional Transmit Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+/* Tx Queue Arbitration Priority 0=low, 1=high */
+
+/* Additional Receive Descriptor Control definitions */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
+#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+
+#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+/* Additional DCA related definitions, note change in position of CPUID */
+#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
+#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
+#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
+#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
+
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE (1 << 26)
+#define E1000_ETQF_1588 (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP 0x00008000
+#define E1000_FTQF_1588_TIME_STAMP 0x08000000
+#define E1000_FTQF_MASK 0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP 0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575 0x0400
+#define MAX_NUM_VFS 8
+
+#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
+#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
+#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
+#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
+#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
+
+/* Easy defines for setting default pool, would normally be left a zero */
+#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
+#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
+
+/* Other useful VMD_CTL register defines */
+#define E1000_VT_CTL_IGNORE_MAC (1 << 28)
+#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29)
+#define E1000_VT_CTL_VM_REPL_EN (1 << 30)
+
+/* Per VM Offload register setup */
+#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
+#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */
+#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */
+#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */
+#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */
+#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */
+#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */
+#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */
+#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
+#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */
+
+#define E1000_VLVF_ARRAY_SIZE 32
+#define E1000_VLVF_VLANID_MASK 0x00000FFF
+#define E1000_VLVF_POOLSEL_SHIFT 12
+#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT)
+#define E1000_VLVF_LVLAN 0x00100000
+#define E1000_VLVF_VLANID_ENABLE 0x80000000
+
+#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
+
+#define E1000_IOVCTL 0x05BBC
+#define E1000_IOVCTL_REUSE_VFQ 0x00000001
+
+#define E1000_RPLOLR_STRVLAN 0x40000000
+#define E1000_RPLOLR_STRCRC 0x80000000
+
+#define E1000_DTXCTL_8023LL 0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN 0x0020
+#define E1000_DTXCTL_SPOOF_INT 0x0040
+
+#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14)
+
+#define ALL_QUEUES 0xFFFF
+
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F
+void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
+void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
+void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
+u16 igb_rxpbs_adjust_82580(u32 data);
+s32 igb_set_eee_i350(struct e1000_hw *);
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
+
+/* Wake Up Filter Control */
+#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+
+/* Extended Device Control */
+#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
+/* Physical Func Reset Done Indication */
+#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
+/* Interrupt delay cancellation */
+/* Driver loaded bit for FW */
+#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
+/* Interrupt acknowledge Auto-mask */
+/* Clear Interrupt timers after IMS clear */
+/* packet buffer parity error detection enabled */
+/* descriptor FIFO parity error detection enable */
+#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT 16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
+#define E1000_I2CCMD_OPCODE_READ 0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
+#define E1000_I2CCMD_READY 0x20000000
+#define E1000_I2CCMD_ERROR 0x80000000
+#define E1000_MAX_SGMII_PHY_REG_ADDR 255
+#define E1000_I2CCMD_PHY_TIMEOUT 200
+#define E1000_IVAR_VALID 0x80
+#define E1000_GPIE_NSICR 0x00000001
+#define E1000_GPIE_MSIX_MODE 0x00000010
+#define E1000_GPIE_EIAME 0x40000000
+#define E1000_GPIE_PBA 0x80000000
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_TS 0x10000 /* Pkt was time stamped */
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
+#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
+#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+
+
+/* Management Control */
+#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
+#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
+#define E1000_MANC_EN_BMC2OS 0x10000000 /* OSBMC is Enabled or not */
+/* Enable Neighbor Discovery Filtering */
+#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
+#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
+/* Enable MAC address filtering */
+#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
+
+/* Receive Control */
+#define E1000_RCTL_EN 0x00000002 /* enable */
+#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
+#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
+#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
+#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
+#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
+#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
+#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
+#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
+#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
+#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
+#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
+#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
+#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
+#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
+
+/*
+ * Use byte values for the following shift parameters
+ * Usage:
+ * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
+ * E1000_PSRCTL_BSIZE0_MASK) |
+ * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
+ * E1000_PSRCTL_BSIZE1_MASK) |
+ * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
+ * E1000_PSRCTL_BSIZE2_MASK) |
+ * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
+ * E1000_PSRCTL_BSIZE3_MASK))
+ * where value0 = [128..16256], default=256
+ * value1 = [1024..64512], default=4096
+ * value2 = [0..64512], default=4096
+ * value3 = [0..64512], default=0
+ */
+
+#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
+#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
+#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
+#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
+
+#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
+#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
+#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
+#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
+
+/* SWFW_SYNC Definitions */
+#define E1000_SWFW_EEP_SM 0x1
+#define E1000_SWFW_PHY0_SM 0x2
+#define E1000_SWFW_PHY1_SM 0x4
+#define E1000_SWFW_PHY2_SM 0x20
+#define E1000_SWFW_PHY3_SM 0x40
+
+/* FACTPS Definitions */
+/* Device Control */
+#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
+#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
+#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
+#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
+#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
+#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
+#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
+#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
+#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
+#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
+#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
+/* Defined polarity of Dock/Undock indication in SDP[0] */
+/* Reset both PHY ports, through PHYRST_N pin */
+/* enable link status from external LINK_0 and LINK_1 pins */
+#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
+#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
+#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
+#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
+#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
+#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
+/* Initiate an interrupt to manageability engine */
+#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
+
+/* Bit definitions for the Management Data IO (MDIO) and Management Data
+ * Clock (MDC) pins in the Device Control Register.
+ */
+
+#define E1000_CONNSW_ENRGSRC 0x4
+#define E1000_PCS_CFG_PCS_EN 8
+#define E1000_PCS_LCTL_FLV_LINK_UP 1
+#define E1000_PCS_LCTL_FSV_100 2
+#define E1000_PCS_LCTL_FSV_1000 4
+#define E1000_PCS_LCTL_FDV_FULL 8
+#define E1000_PCS_LCTL_FSD 0x10
+#define E1000_PCS_LCTL_FORCE_LINK 0x20
+#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
+#define E1000_PCS_LCTL_AN_ENABLE 0x10000
+#define E1000_PCS_LCTL_AN_RESTART 0x20000
+#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
+#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
+
+#define E1000_PCS_LSTS_LINK_OK 1
+#define E1000_PCS_LSTS_SPEED_100 2
+#define E1000_PCS_LSTS_SPEED_1000 4
+#define E1000_PCS_LSTS_DUPLEX_FULL 8
+#define E1000_PCS_LSTS_SYNK_OK 0x10
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
+#define E1000_STATUS_FUNC_SHIFT 2
+#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+/* Change in Dock/Undock state. Clear on write '0'. */
+/* Status of Master requests. */
+#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
+/* BMC external code execution disabled */
+
+/* Constants used to intrepret the masked PCI-X bus speed. */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+
+#define ADVERTISE_10_HALF 0x0001
+#define ADVERTISE_10_FULL 0x0002
+#define ADVERTISE_100_HALF 0x0004
+#define ADVERTISE_100_FULL 0x0008
+#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
+#define ADVERTISE_1000_FULL 0x0020
+
+/* 1000/H is not supported, nor spec-compliant. */
+#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
+ ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
+#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
+#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
+ ADVERTISE_1000_FULL)
+#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
+
+#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
+
+/* LED Control */
+#define E1000_LEDCTL_LED0_MODE_SHIFT 0
+#define E1000_LEDCTL_LED0_BLINK 0x00000080
+
+#define E1000_LEDCTL_MODE_LED_ON 0xE
+#define E1000_LEDCTL_MODE_LED_OFF 0xF
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+/* Extended desc bits for Linksec and timesync */
+
+/* Transmit Control */
+#define E1000_TCTL_EN 0x00000002 /* enable tx */
+#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
+#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
+#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
+#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
+
+/* DMA Coalescing register fields */
+#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coalescing
+ * Watchdog Timer */
+#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coalescing Receive
+ * Threshold */
+#define E1000_DMACR_DMACTHR_SHIFT 16
+#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe
+ * transactions */
+#define E1000_DMACR_DMAC_LX_SHIFT 28
+#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */
+
+#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coalescing Transmit
+ * Threshold */
+
+#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */
+
+#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Receive Traffic Rate
+ * Threshold */
+#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rcv packet rate in
+ * current window */
+
+#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rcv Traffic
+ * Current Cnt */
+
+#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* Flow ctrl Rcv Threshold
+ * High val */
+#define E1000_FCRTC_RTH_COAL_SHIFT 4
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */
+
+/* SerDes Control */
+#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
+
+/* Receive Checksum Control */
+#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
+#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
+#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
+#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* Header split receive */
+#define E1000_RFCTL_LEF 0x00040000
+
+/* Collision related configuration parameters */
+#define E1000_COLLISION_THRESHOLD 15
+#define E1000_CT_SHIFT 4
+#define E1000_COLLISION_DISTANCE 63
+#define E1000_COLD_SHIFT 12
+
+/* Ethertype field values */
+#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* PBA constants */
+#define E1000_PBA_34K 0x0022
+#define E1000_PBA_64K 0x0040 /* 64KB */
+
+/* SW Semaphore Register */
+#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+
+/* Interrupt Cause Read */
+#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
+#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
+#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
+#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
+#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
+#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
+#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */
+/* If this bit asserted, the driver should claim the interrupt */
+#define E1000_ICR_INT_ASSERTED 0x80000000
+/* LAN connected device generates an interrupt */
+#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
+
+/* Extended Interrupt Cause Read */
+#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
+#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
+#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
+#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
+#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
+#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
+#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
+#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
+#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+/* TCP Timer */
+
+/*
+ * This defines the bits that are set in the Interrupt Mask
+ * Set/Read Register. Each bit is documented below:
+ * o RXT0 = Receiver Timer Interrupt (ring 0)
+ * o TXDW = Transmit Descriptor Written Back
+ * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
+ * o RXSEQ = Receive Sequence Error
+ * o LSC = Link Status Change
+ */
+#define IMS_ENABLE_MASK ( \
+ E1000_IMS_RXT0 | \
+ E1000_IMS_TXDW | \
+ E1000_IMS_RXDMT0 | \
+ E1000_IMS_RXSEQ | \
+ E1000_IMS_LSC | \
+ E1000_IMS_DOUTSYNC)
+
+/* Interrupt Mask Set */
+#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
+#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
+#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
+#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
+#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */
+#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
+
+/* Extended Interrupt Mask Set */
+#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
+
+/* Interrupt Cause Set */
+#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
+#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
+#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */
+
+/* Extended Interrupt Cause Set */
+
+/* Transmit Descriptor Control */
+/* Enable the counting of descriptors still to be processed. */
+
+/* Flow Control Constants */
+#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
+#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
+#define FLOW_CONTROL_TYPE 0x8808
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+
+/* Receive Address */
+/*
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * Technically, we have 16 spots. However, we reserve one of these spots
+ * (RAR[15]) for our directed address used by controllers with
+ * manageability enabled, allowing us room for 15 multicast addresses.
+ */
+#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
+#define E1000_RAH_POOL_MASK 0x03FC0000
+#define E1000_RAH_POOL_1 0x00040000
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_NVM 1
+#define E1000_ERR_PHY 2
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_PARAM 4
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_RESET 9
+#define E1000_ERR_MASTER_REQUESTS_PENDING 10
+#define E1000_BLK_PHY_RESET 12
+#define E1000_ERR_SWFW_SYNC 13
+#define E1000_NOT_IMPLEMENTED 14
+#define E1000_ERR_MBX 15
+#define E1000_ERR_INVALID_ARGUMENT 16
+#define E1000_ERR_NO_SPACE 17
+#define E1000_ERR_NVM_PBA_SECTION 18
+
+/* Loop limit on how long we wait for auto-negotiation to complete */
+#define COPPER_LINK_UP_LIMIT 10
+#define PHY_AUTO_NEG_LIMIT 45
+#define PHY_FORCE_LIMIT 20
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define MASTER_DISABLE_TIMEOUT 800
+/* Number of milliseconds we wait for PHY configuration done after MAC reset */
+#define PHY_CFG_TIMEOUT 100
+/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
+/* Number of milliseconds for NVM auto read done after MAC reset. */
+#define AUTO_READ_DONE_TIMEOUT 10
+
+/* Flow Control */
+#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
+
+#define E1000_TSYNCTXCTL_VALID 0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID 0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
+#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
+#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */
+#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */
+#define E1000_MDICNFG_PHY_MASK 0x03E00000
+#define E1000_MDICNFG_PHY_SHIFT 21
+
+/* PCI Express Control */
+#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
+#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define E1000_GCR_CAP_VER2 0x00040000
+
+/* mPHY Address Control and Data Registers */
+#define E1000_MPHY_ADDR_CTL 0x0024 /* mPHY Address Control Register */
+#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
+#define E1000_MPHY_DATA 0x0E10 /* mPHY Data Register */
+
+/* mPHY PCS CLK Register */
+#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 /* mPHY PCS CLK AFE CSR Offset */
+/* mPHY Near End Digital Loopback Override Bit */
+#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
+
+/* PHY Control Register */
+#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
+#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
+#define MII_CR_POWER_DOWN 0x0800 /* Power down */
+#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
+#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
+#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
+#define MII_CR_SPEED_1000 0x0040
+#define MII_CR_SPEED_100 0x2000
+#define MII_CR_SPEED_10 0x0000
+
+/* PHY Status Register */
+#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
+#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
+
+/* Autoneg Advertisement Register */
+#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
+#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
+#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
+#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
+#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
+#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
+
+/* Link Partner Ability Register (Base Page) */
+#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
+#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
+
+/* Autoneg Expansion Register */
+
+/* 1000BASE-T Control Register */
+#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
+#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
+#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
+ /* 0=Configure PHY as Slave */
+#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
+ /* 0=Automatic Master/Slave config */
+
+/* 1000BASE-T Status Register */
+#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
+#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
+
+
+/* PHY 1000 MII Register/Bit Definitions */
+/* PHY Registers defined by IEEE */
+#define PHY_CONTROL 0x00 /* Control Register */
+#define PHY_STATUS 0x01 /* Status Register */
+#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
+#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
+#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
+#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
+#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
+#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
+
+/* NVM Control */
+#define E1000_EECD_SK 0x00000001 /* NVM Clock */
+#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
+#define E1000_EECD_DI 0x00000004 /* NVM Data In */
+#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
+#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
+#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
+#define E1000_EECD_PRES 0x00000100 /* NVM Present */
+/* NVM Addressing bits based on type 0=small, 1=large */
+#define E1000_EECD_ADDR_BITS 0x00000400
+#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
+#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
+#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
+#define E1000_EECD_SIZE_EX_SHIFT 11
+
+/* Offset to data in NVM read/write registers */
+#define E1000_NVM_RW_REG_DATA 16
+#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
+#define E1000_NVM_RW_REG_START 1 /* Start operation */
+#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
+
+/* NVM Word Offsets */
+#define NVM_COMPAT 0x0003
+#define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */
+#define NVM_INIT_CONTROL2_REG 0x000F
+#define NVM_INIT_CONTROL3_PORT_B 0x0014
+#define NVM_INIT_CONTROL3_PORT_A 0x0024
+#define NVM_ALT_MAC_ADDR_PTR 0x0037
+#define NVM_CHECKSUM_REG 0x003F
+#define NVM_COMPATIBILITY_REG_3 0x0003
+#define NVM_COMPATIBILITY_BIT_MASK 0x8000
+
+#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
+#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
+#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */
+#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */
+
+#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
+
+/* Mask bits for fields in Word 0x24 of the NVM */
+#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */
+#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed external */
+
+/* Mask bits for fields in Word 0x0f of the NVM */
+#define NVM_WORD0F_PAUSE_MASK 0x3000
+#define NVM_WORD0F_ASM_DIR 0x2000
+
+/* Mask bits for fields in Word 0x1a of the NVM */
+
+/* length of string needed to store part num */
+#define E1000_PBANUM_LENGTH 11
+
+/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
+#define NVM_SUM 0xBABA
+
+#define NVM_PBA_OFFSET_0 8
+#define NVM_PBA_OFFSET_1 9
+#define NVM_PBA_PTR_GUARD 0xFAFA
+#define NVM_WORD_SIZE_BASE_SHIFT 6
+
+/* NVM Commands - Microwire */
+
+/* NVM Commands - SPI */
+#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
+#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
+#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
+#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
+#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
+#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
+
+/* SPI NVM Status Register */
+#define NVM_STATUS_RDY_SPI 0x01
+
+/* Word definitions for ID LED Settings */
+#define ID_LED_RESERVED_0000 0x0000
+#define ID_LED_RESERVED_FFFF 0xFFFF
+#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
+ (ID_LED_OFF1_OFF2 << 8) | \
+ (ID_LED_DEF1_DEF2 << 4) | \
+ (ID_LED_DEF1_DEF2))
+#define ID_LED_DEF1_DEF2 0x1
+#define ID_LED_DEF1_ON2 0x2
+#define ID_LED_DEF1_OFF2 0x3
+#define ID_LED_ON1_DEF2 0x4
+#define ID_LED_ON1_ON2 0x5
+#define ID_LED_ON1_OFF2 0x6
+#define ID_LED_OFF1_DEF2 0x7
+#define ID_LED_OFF1_ON2 0x8
+#define ID_LED_OFF1_OFF2 0x9
+
+#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
+#define IGP_ACTIVITY_LED_ENABLE 0x0300
+#define IGP_LED3_MODE 0x07000000
+
+/* PCI/PCI-X/PCI-EX Config space */
+#define PCIE_DEVICE_CONTROL2 0x28
+#define PCIE_DEVICE_CONTROL2_16ms 0x0005
+
+#define PHY_REVISION_MASK 0xFFFFFFF0
+#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
+#define MAX_PHY_MULTI_PAGE_REG 0xF
+
+/* Bit definitions for valid PHY IDs. */
+/*
+ * I = Integrated
+ * E = External
+ */
+#define M88E1111_I_PHY_ID 0x01410CC0
+#define M88E1112_E_PHY_ID 0x01410C90
+#define I347AT4_E_PHY_ID 0x01410DC0
+#define IGP03E1000_E_PHY_ID 0x02A80390
+#define I82580_I_PHY_ID 0x015403A0
+#define I350_I_PHY_ID 0x015403B0
+#define M88_VENDOR 0x0141
+
+/* M88E1000 Specific Registers */
+#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
+#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
+#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
+
+#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
+#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
+
+/* M88E1000 PHY Specific Control Register */
+#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
+/* 1=CLK125 low, 0=CLK125 toggling */
+#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
+ /* Manual MDI configuration */
+#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
+/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
+#define M88E1000_PSCR_AUTO_X_1000T 0x0040
+/* Auto crossover enabled all speeds */
+#define M88E1000_PSCR_AUTO_X_MODE 0x0060
+/*
+ * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
+ * 0=Normal 10BASE-T Rx Threshold
+ */
+/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
+#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
+
+/* M88E1000 PHY Specific Status Register */
+#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
+#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
+#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
+/*
+ * 0 = <50M
+ * 1 = 50-80M
+ * 2 = 80-110M
+ * 3 = 110-140M
+ * 4 = >140M
+ */
+#define M88E1000_PSSR_CABLE_LENGTH 0x0380
+#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
+#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+
+#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
+
+/* M88E1000 Extended PHY Specific Control Register */
+/*
+ * 1 = Lost lock detect enabled.
+ * Will assert lost lock and bring
+ * link down if idle not seen
+ * within 1ms in 1000BASE-T
+ */
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
+#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the slave
+ */
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
+#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
+#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
+
+/* Intel i347-AT4 Registers */
+
+#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */
+#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */
+#define I347AT4_PAGE_SELECT 0x16
+
+/* i347-AT4 Extended PHY Specific Control Register */
+
+/*
+ * Number of times we will attempt to autonegotiate before downshifting if we
+ * are the master
+ */
+#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
+#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000
+#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000
+#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000
+#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000
+#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000
+#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000
+#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000
+#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000
+#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000
+
+/* i347-AT4 PHY Cable Diagnostics Control */
+#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
+
+/* Marvell 1112 only registers */
+#define M88E1112_VCT_DSP_DISTANCE 0x001A
+
+/* M88EC018 Rev 2 specific DownShift settings */
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
+#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
+
+/* MDI Control */
+#define E1000_MDIC_DATA_MASK 0x0000FFFF
+#define E1000_MDIC_REG_MASK 0x001F0000
+#define E1000_MDIC_REG_SHIFT 16
+#define E1000_MDIC_PHY_MASK 0x03E00000
+#define E1000_MDIC_PHY_SHIFT 21
+#define E1000_MDIC_OP_WRITE 0x04000000
+#define E1000_MDIC_OP_READ 0x08000000
+#define E1000_MDIC_READY 0x10000000
+#define E1000_MDIC_INT_EN 0x20000000
+#define E1000_MDIC_ERROR 0x40000000
+#define E1000_MDIC_DEST 0x80000000
+
+/* Thermal Sensor */
+#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */
+#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Speed Throttle Event */
+
+/* Energy Efficient Ethernet */
+#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* EEE Enable 1G AN */
+#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
+#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
+#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
+#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
+
+/* SerDes Control */
+#define E1000_GEN_CTL_READY 0x80000000
+#define E1000_GEN_CTL_ADDRESS_SHIFT 8
+#define E1000_GEN_POLL_TIMEOUT 640
+
+#define E1000_VFTA_ENTRY_SHIFT 5
+#define E1000_VFTA_ENTRY_MASK 0x7F
+#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
+
+/* DMA Coalescing register fields */
+#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision based
+ on DMA coal */
+
+/* Tx Rate-Scheduler Config fields */
+#define E1000_RTTBCNRC_RS_ENA 0x80000000
+#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF
+#define E1000_RTTBCNRC_RF_INT_SHIFT 14
+#define E1000_RTTBCNRC_RF_INT_MASK \
+ (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_HW_H_
+#define _E1000_HW_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+
+#include "e1000_regs.h"
+#include "e1000_defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576 0x10C9
+#define E1000_DEV_ID_82576_FIBER 0x10E6
+#define E1000_DEV_ID_82576_SERDES 0x10E7
+#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
+#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
+#define E1000_DEV_ID_82576_NS 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES 0x1518
+#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
+#define E1000_DEV_ID_82575EB_COPPER 0x10A7
+#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
+#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
+#define E1000_DEV_ID_82580_COPPER 0x150E
+#define E1000_DEV_ID_82580_FIBER 0x150F
+#define E1000_DEV_ID_82580_SERDES 0x1510
+#define E1000_DEV_ID_82580_SGMII 0x1511
+#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
+#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527
+#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
+#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
+#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
+#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
+#define E1000_DEV_ID_I350_COPPER 0x1521
+#define E1000_DEV_ID_I350_FIBER 0x1522
+#define E1000_DEV_ID_I350_SERDES 0x1523
+#define E1000_DEV_ID_I350_SGMII 0x1524
+
+#define E1000_REVISION_2 2
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
+#define E1000_FUNC_2 2
+#define E1000_FUNC_3 3
+
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_82575,
+ e1000_82576,
+ e1000_82580,
+ e1000_i350,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+enum e1000_media_type {
+ e1000_media_type_unknown = 0,
+ e1000_media_type_copper = 1,
+ e1000_media_type_internal_serdes = 2,
+ e1000_num_media_types
+};
+
+enum e1000_nvm_type {
+ e1000_nvm_unknown = 0,
+ e1000_nvm_none,
+ e1000_nvm_eeprom_spi,
+ e1000_nvm_flash_hw,
+ e1000_nvm_flash_sw
+};
+
+enum e1000_nvm_override {
+ e1000_nvm_override_none = 0,
+ e1000_nvm_override_spi_small,
+ e1000_nvm_override_spi_large,
+};
+
+enum e1000_phy_type {
+ e1000_phy_unknown = 0,
+ e1000_phy_none,
+ e1000_phy_m88,
+ e1000_phy_igp,
+ e1000_phy_igp_2,
+ e1000_phy_gg82563,
+ e1000_phy_igp_3,
+ e1000_phy_ife,
+ e1000_phy_82580,
+};
+
+enum e1000_bus_type {
+ e1000_bus_type_unknown = 0,
+ e1000_bus_type_pci,
+ e1000_bus_type_pcix,
+ e1000_bus_type_pci_express,
+ e1000_bus_type_reserved
+};
+
+enum e1000_bus_speed {
+ e1000_bus_speed_unknown = 0,
+ e1000_bus_speed_33,
+ e1000_bus_speed_66,
+ e1000_bus_speed_100,
+ e1000_bus_speed_120,
+ e1000_bus_speed_133,
+ e1000_bus_speed_2500,
+ e1000_bus_speed_5000,
+ e1000_bus_speed_reserved
+};
+
+enum e1000_bus_width {
+ e1000_bus_width_unknown = 0,
+ e1000_bus_width_pcie_x1,
+ e1000_bus_width_pcie_x2,
+ e1000_bus_width_pcie_x4 = 4,
+ e1000_bus_width_pcie_x8 = 8,
+ e1000_bus_width_32,
+ e1000_bus_width_64,
+ e1000_bus_width_reserved
+};
+
+enum e1000_1000t_rx_status {
+ e1000_1000t_rx_status_not_ok = 0,
+ e1000_1000t_rx_status_ok,
+ e1000_1000t_rx_status_undefined = 0xFF
+};
+
+enum e1000_rev_polarity {
+ e1000_rev_polarity_normal = 0,
+ e1000_rev_polarity_reversed,
+ e1000_rev_polarity_undefined = 0xFF
+};
+
+enum e1000_fc_mode {
+ e1000_fc_none = 0,
+ e1000_fc_rx_pause,
+ e1000_fc_tx_pause,
+ e1000_fc_full,
+ e1000_fc_default = 0xFF
+};
+
+/* Statistics counters collected by the MAC */
+struct e1000_hw_stats {
+ u64 crcerrs;
+ u64 algnerrc;
+ u64 symerrs;
+ u64 rxerrc;
+ u64 mpc;
+ u64 scc;
+ u64 ecol;
+ u64 mcc;
+ u64 latecol;
+ u64 colc;
+ u64 dc;
+ u64 tncrs;
+ u64 sec;
+ u64 cexterr;
+ u64 rlec;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 fcruc;
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc;
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mgprc;
+ u64 mgpdc;
+ u64 mgptc;
+ u64 tor;
+ u64 tot;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 iac;
+ u64 icrxptc;
+ u64 icrxatc;
+ u64 ictxptc;
+ u64 ictxatc;
+ u64 ictxqec;
+ u64 ictxqmtc;
+ u64 icrxdmtc;
+ u64 icrxoc;
+ u64 cbtmpc;
+ u64 htdpmc;
+ u64 cbrdpc;
+ u64 cbrmpc;
+ u64 rpthc;
+ u64 hgptc;
+ u64 htcbdpc;
+ u64 hgorc;
+ u64 hgotc;
+ u64 lenerrs;
+ u64 scvpc;
+ u64 hrmpc;
+ u64 doosync;
+ u64 o2bgptc;
+ u64 o2bspc;
+ u64 b2ospc;
+ u64 b2ogprc;
+};
+
+struct e1000_phy_stats {
+ u32 idle_errors;
+ u32 receive_errors;
+};
+
+struct e1000_host_mng_dhcp_cookie {
+ u32 signature;
+ u8 status;
+ u8 reserved0;
+ u16 vlan_id;
+ u32 reserved1;
+ u16 reserved2;
+ u8 reserved3;
+ u8 checksum;
+};
+
+/* Host Interface "Rev 1" */
+struct e1000_host_command_header {
+ u8 command_id;
+ u8 command_length;
+ u8 command_options;
+ u8 checksum;
+};
+
+#define E1000_HI_MAX_DATA_LENGTH 252
+struct e1000_host_command_info {
+ struct e1000_host_command_header command_header;
+ u8 command_data[E1000_HI_MAX_DATA_LENGTH];
+};
+
+/* Host Interface "Rev 2" */
+struct e1000_host_mng_command_header {
+ u8 command_id;
+ u8 checksum;
+ u16 reserved1;
+ u16 reserved2;
+ u16 command_length;
+};
+
+#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
+struct e1000_host_mng_command_info {
+ struct e1000_host_mng_command_header command_header;
+ u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
+};
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_mbx.h"
+
+struct e1000_mac_operations {
+ s32 (*check_for_link)(struct e1000_hw *);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ bool (*check_mng_mode)(struct e1000_hw *);
+ s32 (*setup_physical_interface)(struct e1000_hw *);
+ void (*rar_set)(struct e1000_hw *, u8 *, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
+};
+
+struct e1000_phy_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*check_polarity)(struct e1000_hw *);
+ s32 (*check_reset_block)(struct e1000_hw *);
+ s32 (*force_speed_duplex)(struct e1000_hw *);
+ s32 (*get_cfg_done)(struct e1000_hw *hw);
+ s32 (*get_cable_length)(struct e1000_hw *);
+ s32 (*get_phy_info)(struct e1000_hw *);
+ s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*reset)(struct e1000_hw *);
+ s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
+ s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
+ s32 (*write_reg)(struct e1000_hw *, u32, u16);
+};
+
+struct e1000_nvm_operations {
+ s32 (*acquire)(struct e1000_hw *);
+ s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
+ void (*release)(struct e1000_hw *);
+ s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
+ s32 (*update)(struct e1000_hw *);
+ s32 (*validate)(struct e1000_hw *);
+};
+
+struct e1000_info {
+ s32 (*get_invariants)(struct e1000_hw *);
+ struct e1000_mac_operations *mac_ops;
+ struct e1000_phy_operations *phy_ops;
+ struct e1000_nvm_operations *nvm_ops;
+};
+
+extern const struct e1000_info e1000_82575_info;
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u32 ledctl_default;
+ u32 ledctl_mode1;
+ u32 ledctl_mode2;
+ u32 mc_filter_type;
+ u32 txcw;
+
+ u16 mta_reg_count;
+ u16 uta_reg_count;
+
+ /* Maximum size of the MTA register table in all supported adapters */
+ #define MAX_MTA_REG 128
+ u32 mta_shadow[MAX_MTA_REG];
+ u16 rar_entry_count;
+
+ u8 forced_speed_duplex;
+
+ bool adaptive_ifs;
+ bool arc_subsystem_valid;
+ bool asf_firmware_present;
+ bool autoneg;
+ bool autoneg_failed;
+ bool disable_hw_init_bits;
+ bool get_link_status;
+ bool ifs_params_forced;
+ bool in_ifs_mode;
+ bool report_tx_early;
+ bool serdes_has_link;
+ bool tx_pkt_filtering;
+};
+
+struct e1000_phy_info {
+ struct e1000_phy_operations ops;
+
+ enum e1000_phy_type type;
+
+ enum e1000_1000t_rx_status local_rx;
+ enum e1000_1000t_rx_status remote_rx;
+ enum e1000_ms_type ms_type;
+ enum e1000_ms_type original_ms_type;
+ enum e1000_rev_polarity cable_polarity;
+ enum e1000_smart_speed smart_speed;
+
+ u32 addr;
+ u32 id;
+ u32 reset_delay_us; /* in usec */
+ u32 revision;
+
+ enum e1000_media_type media_type;
+
+ u16 autoneg_advertised;
+ u16 autoneg_mask;
+ u16 cable_length;
+ u16 max_cable_length;
+ u16 min_cable_length;
+
+ u8 mdix;
+
+ bool disable_polarity_correction;
+ bool is_mdix;
+ bool polarity_correction;
+ bool reset_disable;
+ bool speed_downgraded;
+ bool autoneg_wait_to_complete;
+};
+
+struct e1000_nvm_info {
+ struct e1000_nvm_operations ops;
+ enum e1000_nvm_type type;
+ enum e1000_nvm_override override;
+
+ u32 flash_bank_size;
+ u32 flash_base_addr;
+
+ u16 word_size;
+ u16 delay_usec;
+ u16 address_bits;
+ u16 opcode_bits;
+ u16 page_size;
+};
+
+struct e1000_bus_info {
+ enum e1000_bus_type type;
+ enum e1000_bus_speed speed;
+ enum e1000_bus_width width;
+
+ u32 snoop;
+
+ u16 func;
+ u16 pci_cmd_word;
+};
+
+struct e1000_fc_info {
+ u32 high_water; /* Flow control high-water mark */
+ u32 low_water; /* Flow control low-water mark */
+ u16 pause_time; /* Flow control pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ enum e1000_fc_mode current_mode; /* Type of flow control */
+ enum e1000_fc_mode requested_mode;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct e1000_hw *, u16);
+ s32 (*check_for_ack)(struct e1000_hw *, u16);
+ s32 (*check_for_rst)(struct e1000_hw *, u16);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_82575 {
+ bool sgmii_active;
+ bool global_device_reset;
+ bool eee_disable;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_fc_info fc;
+ struct e1000_phy_info phy;
+ struct e1000_nvm_info nvm;
+ struct e1000_bus_info bus;
+ struct e1000_mbx_info mbx;
+ struct e1000_host_mng_dhcp_cookie mng_cookie;
+
+ union {
+ struct e1000_dev_spec_82575 _82575;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+extern struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
+#define hw_dbg(format, arg...) \
+ netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
+
+/* These functions must be implemented by drivers */
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+#endif /* _E1000_HW_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+#include "e1000_mac.h"
+
+#include "igb.h"
+
+static s32 igb_set_default_fc(struct e1000_hw *hw);
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
+
+/**
+ * igb_get_bus_info_pcie - Get PCIe bus information
+ * @hw: pointer to the HW structure
+ *
+ * Determines and stores the system bus information for a particular
+ * network interface. The following bus information is determined and stored:
+ * bus speed, bus width, type (PCIe), and PCIe function.
+ **/
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val;
+ u32 reg;
+ u16 pcie_link_status;
+
+ bus->type = e1000_bus_type_pci_express;
+
+ ret_val = igb_read_pcie_cap_reg(hw,
+ PCI_EXP_LNKSTA,
+ &pcie_link_status);
+ if (ret_val) {
+ bus->width = e1000_bus_width_unknown;
+ bus->speed = e1000_bus_speed_unknown;
+ } else {
+ switch (pcie_link_status & PCI_EXP_LNKSTA_CLS) {
+ case PCI_EXP_LNKSTA_CLS_2_5GB:
+ bus->speed = e1000_bus_speed_2500;
+ break;
+ case PCI_EXP_LNKSTA_CLS_5_0GB:
+ bus->speed = e1000_bus_speed_5000;
+ break;
+ default:
+ bus->speed = e1000_bus_speed_unknown;
+ break;
+ }
+
+ bus->width = (enum e1000_bus_width)((pcie_link_status &
+ PCI_EXP_LNKSTA_NLW) >>
+ PCI_EXP_LNKSTA_NLW_SHIFT);
+ }
+
+ reg = rd32(E1000_STATUS);
+ bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
+
+ return 0;
+}
+
+/**
+ * igb_clear_vfta - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+void igb_clear_vfta(struct e1000_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ array_wr32(E1000_VFTA, offset, 0);
+ wrfl();
+ }
+}
+
+/**
+ * igb_write_vfta - Write value to VLAN filter table
+ * @hw: pointer to the HW structure
+ * @offset: register offset in VLAN filter table
+ * @value: register value written to VLAN filter table
+ *
+ * Writes value at the given offset in the register array which stores
+ * the VLAN filter table.
+ **/
+static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
+{
+ array_wr32(E1000_VFTA, offset, value);
+ wrfl();
+}
+
+/**
+ * igb_init_rx_addrs - Initialize receive address's
+ * @hw: pointer to the HW structure
+ * @rar_count: receive address registers
+ *
+ * Setups the receive address registers by setting the base receive address
+ * register to the devices MAC address and clearing all the other receive
+ * address registers to 0.
+ **/
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
+{
+ u32 i;
+ u8 mac_addr[ETH_ALEN] = {0};
+
+ /* Setup the receive address */
+ hw_dbg("Programming MAC Address into RAR[0]\n");
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ /* Zero out the other (rar_entry_count - 1) receive addresses */
+ hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
+ for (i = 1; i < rar_count; i++)
+ hw->mac.ops.rar_set(hw, mac_addr, i);
+}
+
+/**
+ * igb_vfta_set - enable or disable vlan in VLAN filter table
+ * @hw: pointer to the HW structure
+ * @vid: VLAN id to add or remove
+ * @add: if true add filter, if false remove
+ *
+ * Sets or clears a bit in the VLAN filter table array based on VLAN id
+ * and if we are adding or removing the filter
+ **/
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
+{
+ u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
+ u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ u32 vfta = array_rd32(E1000_VFTA, index);
+ s32 ret_val = 0;
+
+ /* bit was set/cleared before we started */
+ if ((!!(vfta & mask)) == add) {
+ ret_val = -E1000_ERR_CONFIG;
+ } else {
+ if (add)
+ vfta |= mask;
+ else
+ vfta &= ~mask;
+ }
+
+ igb_write_vfta(hw, index, vfta);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_alt_mac_addr - Check for alternate MAC addr
+ * @hw: pointer to the HW structure
+ *
+ * Checks the nvm for an alternate MAC address. An alternate MAC address
+ * can be setup by pre-boot software and must be treated like a permanent
+ * address and must override the actual permanent MAC address. If an
+ * alternate MAC address is fopund it is saved in the hw struct and
+ * prgrammed into RAR0 and the cuntion returns success, otherwise the
+ * function returns an error.
+ **/
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
+{
+ u32 i;
+ s32 ret_val = 0;
+ u16 offset, nvm_alt_mac_addr_offset, nvm_data;
+ u8 alt_mac_addr[ETH_ALEN];
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
+ &nvm_alt_mac_addr_offset);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (nvm_alt_mac_addr_offset == 0xFFFF) {
+ /* There is no Alternate MAC Address */
+ goto out;
+ }
+
+ if (hw->bus.func == E1000_FUNC_1)
+ nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
+ for (i = 0; i < ETH_ALEN; i += 2) {
+ offset = nvm_alt_mac_addr_offset + (i >> 1);
+ ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
+ alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
+ }
+
+ /* if multicast bit is set, the alternate address will not be used */
+ if (is_multicast_ether_addr(alt_mac_addr)) {
+ hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
+ goto out;
+ }
+
+ /*
+ * We have a valid alternate MAC address, and we want to treat it the
+ * same as the normal permanent MAC address stored by the HW into the
+ * RAR. Do this by mapping this address into RAR0.
+ */
+ hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_rar_set - Set receive address register
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index: receive address array register
+ *
+ * Sets the receive address array register at index to the address passed
+ * in by addr.
+ **/
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
+{
+ u32 rar_low, rar_high;
+
+ /*
+ * HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* If MAC address zero, no need to set the AV bit */
+ if (rar_low || rar_high)
+ rar_high |= E1000_RAH_AV;
+
+ /*
+ * Some bridges will combine consecutive 32-bit writes into
+ * a single burst write, which will malfunction on some parts.
+ * The flushes avoid this.
+ */
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+/**
+ * igb_mta_set - Set multicast filter table address
+ * @hw: pointer to the HW structure
+ * @hash_value: determines the MTA register and bit to set
+ *
+ * The multicast table address is a register array of 32-bit registers.
+ * The hash_value is used to determine what register the bit is in, the
+ * current value is read, the new bit is OR'd in and the new value is
+ * written back into the register.
+ **/
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
+{
+ u32 hash_bit, hash_reg, mta;
+
+ /*
+ * The MTA is a register array of 32-bit registers. It is
+ * treated like an array of (32*mta_reg_count) bits. We want to
+ * set bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The (hw->mac.mta_reg_count - 1) serves as a
+ * mask to bits 31:5 of the hash value which gives us the
+ * register we're modifying. The hash bit within that register
+ * is determined by the lower 5 bits of the hash value.
+ */
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ mta = array_rd32(E1000_MTA, hash_reg);
+
+ mta |= (1 << hash_bit);
+
+ array_wr32(E1000_MTA, hash_reg, mta);
+ wrfl();
+}
+
+/**
+ * igb_hash_mc_addr - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * igb_mta_set()
+ **/
+static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * For a mc_filter_type of 0, bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ /*
+ * The portion of the address that is used for the hash table
+ * is determined by the mc_filter_type setting.
+ * The algorithm is such that there is a total of 8 bits of shifting.
+ * The bit_shift for a mc_filter_type of 0 represents the number of
+ * left-shifts where the MSB of mc_addr[5] would still fall within
+ * the hash_mask. Case 0 does this exactly. Since there are a total
+ * of 8 bits of shifting, then mc_addr[4] will shift right the
+ * remaining number of bits. Thus 8 - bit_shift. The rest of the
+ * cases are a variation of this algorithm...essentially raising the
+ * number of bits to shift mc_addr[5] left, while still keeping the
+ * 8-bit shifting total.
+ *
+ * For example, given the following Destination MAC Address and an
+ * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
+ * we can see that the bit_shift for case 0 is 4. These are the hash
+ * values resulting from each mc_filter_type...
+ * [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB
+ *
+ * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
+ * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
+ * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
+ * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
+ */
+ switch (hw->mac.mc_filter_type) {
+ default:
+ case 0:
+ break;
+ case 1:
+ bit_shift += 1;
+ break;
+ case 2:
+ bit_shift += 2;
+ break;
+ case 3:
+ bit_shift += 4;
+ break;
+ }
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * igb_update_mc_addr_list - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ *
+ * Updates entire Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ **/
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count)
+{
+ u32 hash_value, hash_bit, hash_reg;
+ int i;
+
+ /* clear mta_shadow */
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* update mta_shadow from mc_addr_list */
+ for (i = 0; (u32) i < mc_addr_count; i++) {
+ hash_value = igb_hash_mc_addr(hw, mc_addr_list);
+
+ hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
+ hash_bit = hash_value & 0x1F;
+
+ hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
+ mc_addr_list += (ETH_ALEN);
+ }
+
+ /* replace the entire MTA table */
+ for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
+ array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
+ wrfl();
+}
+
+/**
+ * igb_clear_hw_cntrs_base - Clear base hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the base hardware counters by reading the counter registers.
+ **/
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
+{
+ rd32(E1000_CRCERRS);
+ rd32(E1000_SYMERRS);
+ rd32(E1000_MPC);
+ rd32(E1000_SCC);
+ rd32(E1000_ECOL);
+ rd32(E1000_MCC);
+ rd32(E1000_LATECOL);
+ rd32(E1000_COLC);
+ rd32(E1000_DC);
+ rd32(E1000_SEC);
+ rd32(E1000_RLEC);
+ rd32(E1000_XONRXC);
+ rd32(E1000_XONTXC);
+ rd32(E1000_XOFFRXC);
+ rd32(E1000_XOFFTXC);
+ rd32(E1000_FCRUC);
+ rd32(E1000_GPRC);
+ rd32(E1000_BPRC);
+ rd32(E1000_MPRC);
+ rd32(E1000_GPTC);
+ rd32(E1000_GORCL);
+ rd32(E1000_GORCH);
+ rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH);
+ rd32(E1000_RNBC);
+ rd32(E1000_RUC);
+ rd32(E1000_RFC);
+ rd32(E1000_ROC);
+ rd32(E1000_RJC);
+ rd32(E1000_TORL);
+ rd32(E1000_TORH);
+ rd32(E1000_TOTL);
+ rd32(E1000_TOTH);
+ rd32(E1000_TPR);
+ rd32(E1000_TPT);
+ rd32(E1000_MPTC);
+ rd32(E1000_BPTC);
+}
+
+/**
+ * igb_check_for_copper_link - Check for link (Copper)
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see of the link status of the hardware has changed. If a
+ * change in link status has been detected, then we read the PHY registers
+ * to get the current speed/duplex if link exists.
+ **/
+s32 igb_check_for_copper_link(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ bool link;
+
+ /*
+ * We only want to go out to the PHY registers to see if Auto-Neg
+ * has completed and/or if our link status has changed. The
+ * get_link_status flag is set upon receiving a Link Status
+ * Change or Rx Sequence Error interrupt.
+ */
+ if (!mac->get_link_status) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /*
+ * First we want to see if the MII Status Register reports
+ * link. If so, then we want to get the current speed/duplex
+ * of the PHY.
+ */
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ goto out; /* No link detected */
+
+ mac->get_link_status = false;
+
+ /*
+ * Check if there was DownShift, must be checked
+ * immediately after link-up
+ */
+ igb_check_downshift(hw);
+
+ /*
+ * If we are forcing speed/duplex, then we simply return since
+ * we have already determined whether we have link or not.
+ */
+ if (!mac->autoneg) {
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ /*
+ * Auto-Neg is enabled. Auto Speed Detection takes care
+ * of MAC speed/duplex configuration. So we only need to
+ * configure Collision Distance in the MAC.
+ */
+ igb_config_collision_dist(hw);
+
+ /*
+ * Configure Flow Control now that Auto-Neg has completed.
+ * First, we need to restore the desired flow control
+ * settings because we may have had to re-autoneg with a
+ * different link partner.
+ */
+ ret_val = igb_config_fc_after_link_up(hw);
+ if (ret_val)
+ hw_dbg("Error configuring flow control\n");
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_link - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+s32 igb_setup_link(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ /*
+ * In the case of the phy reset being blocked, we already have a link.
+ * We do not need to set it up again.
+ */
+ if (igb_check_reset_block(hw))
+ goto out;
+
+ /*
+ * If requested flow control is set to default, set flow control
+ * based on the EEPROM flow control settings.
+ */
+ if (hw->fc.requested_mode == e1000_fc_default) {
+ ret_val = igb_set_default_fc(hw);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * We want to save off the original Flow Control configuration just
+ * in case we get disconnected and then reconnected into a different
+ * hub or switch with different Flow Control capabilities.
+ */
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
+
+ /* Call the necessary media_type subroutine to configure the link. */
+ ret_val = hw->mac.ops.setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ hw_dbg("Initializing the Flow Control address, type and timer regs\n");
+ wr32(E1000_FCT, FLOW_CONTROL_TYPE);
+ wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+
+ wr32(E1000_FCTTV, hw->fc.pause_time);
+
+ ret_val = igb_set_fc_watermarks(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_config_collision_dist - Configure collision distance
+ * @hw: pointer to the HW structure
+ *
+ * Configures the collision distance to the default value and is used
+ * during link setup. Currently no func pointer exists and all
+ * implementations are handled in the generic version of this function.
+ **/
+void igb_config_collision_dist(struct e1000_hw *hw)
+{
+ u32 tctl;
+
+ tctl = rd32(E1000_TCTL);
+
+ tctl &= ~E1000_TCTL_COLD;
+ tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
+
+ wr32(E1000_TCTL, tctl);
+ wrfl();
+}
+
+/**
+ * igb_set_fc_watermarks - Set flow control high/low watermarks
+ * @hw: pointer to the HW structure
+ *
+ * Sets the flow control high/low threshold (watermark) registers. If
+ * flow control XON frame transmission is enabled, then set XON frame
+ * tansmission as well.
+ **/
+static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 fcrtl = 0, fcrth = 0;
+
+ /*
+ * Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames is not enabled, then these
+ * registers will be set to 0.
+ */
+ if (hw->fc.current_mode & e1000_fc_tx_pause) {
+ /*
+ * We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of
+ * XON frames.
+ */
+ fcrtl = hw->fc.low_water;
+ if (hw->fc.send_xon)
+ fcrtl |= E1000_FCRTL_XONE;
+
+ fcrth = hw->fc.high_water;
+ }
+ wr32(E1000_FCRTL, fcrtl);
+ wr32(E1000_FCRTH, fcrth);
+
+ return ret_val;
+}
+
+/**
+ * igb_set_default_fc - Set flow control default values
+ * @hw: pointer to the HW structure
+ *
+ * Read the EEPROM for the default values for flow control and store the
+ * values.
+ **/
+static s32 igb_set_default_fc(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 nvm_data;
+
+ /*
+ * Read and store word 0x0F of the EEPROM. This word contains bits
+ * that determine the hardware's default PAUSE (flow control) mode,
+ * a bit that determines whether the HW defaults to enabling or
+ * disabling auto-negotiation, and the direction of the
+ * SW defined pins. If there is no SW over-ride of the flow
+ * control setting, then the variable hw->fc will
+ * be initialized based on a value in the EEPROM.
+ */
+ ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
+
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
+ hw->fc.requested_mode = e1000_fc_none;
+ else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
+ NVM_WORD0F_ASM_DIR)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else
+ hw->fc.requested_mode = e1000_fc_full;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_force_mac_fc - Force the MAC's flow control settings
+ * @hw: pointer to the HW structure
+ *
+ * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
+ * device control register to reflect the adapter settings. TFCE and RFCE
+ * need to be explicitly set by software when a copper PHY is used because
+ * autonegotiation is managed by the PHY rather than the MAC. Software must
+ * also configure these bits when link is forced on a fiber connection.
+ **/
+s32 igb_force_mac_fc(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val = 0;
+
+ ctrl = rd32(E1000_CTRL);
+
+ /*
+ * Because we didn't get link via the internal auto-negotiation
+ * mechanism (we either forced link or we got link via PHY
+ * auto-neg), we have to manually enable/disable transmit an
+ * receive flow control.
+ *
+ * The "Case" statement below enables/disable flow control
+ * according to the "hw->fc.current_mode" parameter.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause
+ * frames but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * frames but we do not receive pause frames).
+ * 3: Both Rx and TX flow control (symmetric) is enabled.
+ * other: No other values should be possible at this point.
+ */
+ hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
+
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
+ break;
+ case e1000_fc_rx_pause:
+ ctrl &= (~E1000_CTRL_TFCE);
+ ctrl |= E1000_CTRL_RFCE;
+ break;
+ case e1000_fc_tx_pause:
+ ctrl &= (~E1000_CTRL_RFCE);
+ ctrl |= E1000_CTRL_TFCE;
+ break;
+ case e1000_fc_full:
+ ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ wr32(E1000_CTRL, ctrl);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_config_fc_after_link_up - Configures flow control after link
+ * @hw: pointer to the HW structure
+ *
+ * Checks the status of auto-negotiation after link up to ensure that the
+ * speed and duplex were not forced. If the link needed to be forced, then
+ * flow control needs to be forced also. If auto-negotiation is enabled
+ * and did not fail, then we configure flow control based on our link
+ * partner.
+ **/
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+ u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
+ u16 speed, duplex;
+
+ /*
+ * Check for the case where we have fiber media and auto-neg failed
+ * so we had to force link. In this case, we need to force the
+ * configuration of the MAC to match the "fc" parameter.
+ */
+ if (mac->autoneg_failed) {
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ ret_val = igb_force_mac_fc(hw);
+ } else {
+ if (hw->phy.media_type == e1000_media_type_copper)
+ ret_val = igb_force_mac_fc(hw);
+ }
+
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+
+ /*
+ * Check for the case where we have copper media and auto-neg is
+ * enabled. In this case, we need to check and see if Auto-Neg
+ * has completed, and if so, how the PHY and link partner has
+ * flow control configured.
+ */
+ if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
+ /*
+ * Read the MII Status Register and check to see if AutoNeg
+ * has completed. We read this twice because this reg has
+ * some "sticky" (latched) bits.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
+ &mii_status_reg);
+ if (ret_val)
+ goto out;
+
+ if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
+ hw_dbg("Copper PHY and Auto Neg "
+ "has not completed.\n");
+ goto out;
+ }
+
+ /*
+ * The AutoNeg process has completed, so we now need to
+ * read both the Auto Negotiation Advertisement
+ * Register (Address 4) and the Auto_Negotiation Base
+ * Page Ability Register (Address 5) to determine how
+ * flow control was negotiated.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
+ &mii_nway_adv_reg);
+ if (ret_val)
+ goto out;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
+ &mii_nway_lp_ability_reg);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Two bits in the Auto Negotiation Advertisement Register
+ * (Address 4) and two bits in the Auto Negotiation Base
+ * Page Ability Register (Address 5) determine flow control
+ * for both the PHY and the link partner. The following
+ * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
+ * 1999, describes these PAUSE resolution bits and how flow
+ * control is determined based upon these settings.
+ * NOTE: DC = Don't Care
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
+ *-------|---------|-------|---------|--------------------
+ * 0 | 0 | DC | DC | e1000_fc_none
+ * 0 | 1 | 0 | DC | e1000_fc_none
+ * 0 | 1 | 1 | 0 | e1000_fc_none
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ * 1 | 0 | 0 | DC | e1000_fc_none
+ * 1 | DC | 1 | DC | e1000_fc_full
+ * 1 | 1 | 0 | 0 | e1000_fc_none
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ *
+ * Are both PAUSE bits set to 1? If so, this implies
+ * Symmetric Flow Control is enabled at both ends. The
+ * ASM_DIR bits are irrelevant per the spec.
+ *
+ * For Symmetric Flow Control:
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | DC | 1 | DC | E1000_fc_full
+ *
+ */
+ if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
+ /*
+ * Now we need to check if the user selected RX ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == e1000_fc_full) {
+ hw->fc.current_mode = e1000_fc_full;
+ hw_dbg("Flow Control = FULL.\r\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = "
+ "RX PAUSE frames only.\r\n");
+ }
+ }
+ /*
+ * For receiving PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
+ */
+ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_tx_pause;
+ hw_dbg("Flow Control = TX PAUSE frames only.\r\n");
+ }
+ /*
+ * For transmitting PAUSE frames ONLY.
+ *
+ * LOCAL DEVICE | LINK PARTNER
+ * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
+ *-------|---------|-------|---------|--------------------
+ * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
+ */
+ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
+ (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
+ !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
+ (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
+ }
+ /*
+ * Per the IEEE spec, at this point flow control should be
+ * disabled. However, we want to consider that we could
+ * be connected to a legacy switch that doesn't advertise
+ * desired flow control, but can be forced on the link
+ * partner. So if we advertised no flow control, that is
+ * what we will resolve to. If we advertised some kind of
+ * receive capability (Rx Pause Only or Full Flow Control)
+ * and the link partner advertised none, we will configure
+ * ourselves to enable Rx Flow Control only. We can do
+ * this safely for two reasons: If the link partner really
+ * didn't want flow control enabled, and we enable Rx, no
+ * harm done since we won't be receiving any PAUSE frames
+ * anyway. If the intent on the link partner was to have
+ * flow control enabled, then by us enabling RX only, we
+ * can at least receive pause frames and process them.
+ * This is a good idea because in most cases, since we are
+ * predominantly a server NIC, more times than not we will
+ * be asked to delay transmission of packets than asking
+ * our link partner to pause transmission of frames.
+ */
+ else if ((hw->fc.requested_mode == e1000_fc_none ||
+ hw->fc.requested_mode == e1000_fc_tx_pause) ||
+ hw->fc.strict_ieee) {
+ hw->fc.current_mode = e1000_fc_none;
+ hw_dbg("Flow Control = NONE.\r\n");
+ } else {
+ hw->fc.current_mode = e1000_fc_rx_pause;
+ hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
+ }
+
+ /*
+ * Now we need to do one last check... If we auto-
+ * negotiated to HALF DUPLEX, flow control should not be
+ * enabled per IEEE 802.3 spec.
+ */
+ ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
+ if (ret_val) {
+ hw_dbg("Error getting link speed and duplex\n");
+ goto out;
+ }
+
+ if (duplex == HALF_DUPLEX)
+ hw->fc.current_mode = e1000_fc_none;
+
+ /*
+ * Now we call a subroutine to actually force the MAC
+ * controller to use the correct flow control settings.
+ */
+ ret_val = igb_force_mac_fc(hw);
+ if (ret_val) {
+ hw_dbg("Error forcing flow control settings\n");
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
+ * @hw: pointer to the HW structure
+ * @speed: stores the current speed
+ * @duplex: stores the current duplex
+ *
+ * Read the status register for the current speed/duplex and store the current
+ * speed and duplex for copper connections.
+ **/
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ u32 status;
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_SPEED_1000) {
+ *speed = SPEED_1000;
+ hw_dbg("1000 Mbs, ");
+ } else if (status & E1000_STATUS_SPEED_100) {
+ *speed = SPEED_100;
+ hw_dbg("100 Mbs, ");
+ } else {
+ *speed = SPEED_10;
+ hw_dbg("10 Mbs, ");
+ }
+
+ if (status & E1000_STATUS_FD) {
+ *duplex = FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ } else {
+ *duplex = HALF_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ }
+
+ return 0;
+}
+
+/**
+ * igb_get_hw_semaphore - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+s32 igb_get_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 ret_val = 0;
+ s32 timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* Get the SW semaphore */
+ while (i < timeout) {
+ swsm = rd32(E1000_SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ udelay(50);
+ i++;
+ }
+
+ if (i == timeout) {
+ hw_dbg("Driver can't access device - SMBI bit is set.\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ /* Get the FW semaphore. */
+ for (i = 0; i < timeout; i++) {
+ swsm = rd32(E1000_SWSM);
+ wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ /* Release semaphores */
+ igb_put_hw_semaphore(hw);
+ hw_dbg("Driver can't access the NVM\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_put_hw_semaphore - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+void igb_put_hw_semaphore(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = rd32(E1000_SWSM);
+
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+
+ wr32(E1000_SWSM, swsm);
+}
+
+/**
+ * igb_get_auto_rd_done - Check for auto read completion
+ * @hw: pointer to the HW structure
+ *
+ * Check EEPROM for Auto Read done bit.
+ **/
+s32 igb_get_auto_rd_done(struct e1000_hw *hw)
+{
+ s32 i = 0;
+ s32 ret_val = 0;
+
+
+ while (i < AUTO_READ_DONE_TIMEOUT) {
+ if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
+ break;
+ msleep(1);
+ i++;
+ }
+
+ if (i == AUTO_READ_DONE_TIMEOUT) {
+ hw_dbg("Auto read by HW from NVM has not completed.\n");
+ ret_val = -E1000_ERR_RESET;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_valid_led_default - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
+ switch(hw->phy.media_type) {
+ case e1000_media_type_internal_serdes:
+ *data = ID_LED_DEFAULT_82575_SERDES;
+ break;
+ case e1000_media_type_copper:
+ default:
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+ }
+out:
+ return ret_val;
+}
+
+/**
+ * igb_id_led_init -
+ * @hw: pointer to the HW structure
+ *
+ **/
+s32 igb_id_led_init(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val;
+ const u32 ledctl_mask = 0x000000FF;
+ const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
+ const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
+ u16 data, i, temp;
+ const u16 led_mask = 0x0F;
+
+ ret_val = igb_valid_led_default(hw, &data);
+ if (ret_val)
+ goto out;
+
+ mac->ledctl_default = rd32(E1000_LEDCTL);
+ mac->ledctl_mode1 = mac->ledctl_default;
+ mac->ledctl_mode2 = mac->ledctl_default;
+
+ for (i = 0; i < 4; i++) {
+ temp = (data >> (i << 2)) & led_mask;
+ switch (temp) {
+ case ID_LED_ON1_DEF2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_ON1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_OFF1_DEF2:
+ case ID_LED_OFF1_ON2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode1 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ switch (temp) {
+ case ID_LED_DEF1_ON2:
+ case ID_LED_ON1_ON2:
+ case ID_LED_OFF1_ON2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_on << (i << 3);
+ break;
+ case ID_LED_DEF1_OFF2:
+ case ID_LED_ON1_OFF2:
+ case ID_LED_OFF1_OFF2:
+ mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
+ mac->ledctl_mode2 |= ledctl_off << (i << 3);
+ break;
+ default:
+ /* Do nothing */
+ break;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_cleanup_led - Set LED config to default operation
+ * @hw: pointer to the HW structure
+ *
+ * Remove the current LED configuration and set the LED configuration
+ * to the default value, saved from the EEPROM.
+ **/
+s32 igb_cleanup_led(struct e1000_hw *hw)
+{
+ wr32(E1000_LEDCTL, hw->mac.ledctl_default);
+ return 0;
+}
+
+/**
+ * igb_blink_led - Blink LED
+ * @hw: pointer to the HW structure
+ *
+ * Blink the led's which are set to be on.
+ **/
+s32 igb_blink_led(struct e1000_hw *hw)
+{
+ u32 ledctl_blink = 0;
+ u32 i;
+
+ /*
+ * set the blink bit for each LED that's "on" (0x0E)
+ * in ledctl_mode2
+ */
+ ledctl_blink = hw->mac.ledctl_mode2;
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
+ (i * 8));
+
+ wr32(E1000_LEDCTL, ledctl_blink);
+
+ return 0;
+}
+
+/**
+ * igb_led_off - Turn LED off
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED off.
+ **/
+s32 igb_led_off(struct e1000_hw *hw)
+{
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_disable_pcie_master - Disables PCI-express master access
+ * @hw: pointer to the HW structure
+ *
+ * Returns 0 (0) if successful, else returns -10
+ * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
+ * the master requests to be disabled.
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests.
+ **/
+s32 igb_disable_pcie_master(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 timeout = MASTER_DISABLE_TIMEOUT;
+ s32 ret_val = 0;
+
+ if (hw->bus.type != e1000_bus_type_pci_express)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
+ wr32(E1000_CTRL, ctrl);
+
+ while (timeout) {
+ if (!(rd32(E1000_STATUS) &
+ E1000_STATUS_GIO_MASTER_ENABLE))
+ break;
+ udelay(100);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("Master requests are pending.\n");
+ ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_validate_mdi_setting - Verify MDI/MDIx settings
+ * @hw: pointer to the HW structure
+ *
+ * Verify that when not using auto-negotitation that MDI/MDIx is correctly
+ * set, which is forced to MDI mode only.
+ **/
+s32 igb_validate_mdi_setting(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
+ hw_dbg("Invalid MDI setting detected\n");
+ hw->phy.mdix = 1;
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
+ * @hw: pointer to the HW structure
+ * @reg: 32bit register offset such as E1000_SCTL
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes an address/data control type register. There are several of these
+ * and they all have the format address << 8 | data and bit 31 is polled for
+ * completion.
+ **/
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data)
+{
+ u32 i, regvalue = 0;
+ s32 ret_val = 0;
+
+ /* Set up the address and data */
+ regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
+ wr32(reg, regvalue);
+
+ /* Poll the ready bit to see if the MDI read completed */
+ for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
+ udelay(5);
+ regvalue = rd32(reg);
+ if (regvalue & E1000_GEN_CTL_READY)
+ break;
+ }
+ if (!(regvalue & E1000_GEN_CTL_READY)) {
+ hw_dbg("Reg %08x did not indicate ready\n", reg);
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_enable_mng_pass_thru - Enable processing of ARP's
+ * @hw: pointer to the HW structure
+ *
+ * Verifies the hardware needs to leave interface enabled so that frames can
+ * be directed to and from the management interface.
+ **/
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
+{
+ u32 manc;
+ u32 fwsm, factps;
+ bool ret_val = false;
+
+ if (!hw->mac.asf_firmware_present)
+ goto out;
+
+ manc = rd32(E1000_MANC);
+
+ if (!(manc & E1000_MANC_RCV_TCO_EN))
+ goto out;
+
+ if (hw->mac.arc_subsystem_valid) {
+ fwsm = rd32(E1000_FWSM);
+ factps = rd32(E1000_FACTPS);
+
+ if (!(factps & E1000_FACTPS_MNGCG) &&
+ ((fwsm & E1000_FWSM_MODE_MASK) ==
+ (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
+ ret_val = true;
+ goto out;
+ }
+ } else {
+ if ((manc & E1000_MANC_SMBUS_EN) &&
+ !(manc & E1000_MANC_ASF_EN)) {
+ ret_val = true;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MAC_H_
+#define _E1000_MAC_H_
+
+#include "e1000_hw.h"
+
+#include "e1000_phy.h"
+#include "e1000_nvm.h"
+#include "e1000_defines.h"
+
+/*
+ * Functions that should not be called directly from drivers but can be used
+ * by other files in this 'shared code'
+ */
+s32 igb_blink_led(struct e1000_hw *hw);
+s32 igb_check_for_copper_link(struct e1000_hw *hw);
+s32 igb_cleanup_led(struct e1000_hw *hw);
+s32 igb_config_fc_after_link_up(struct e1000_hw *hw);
+s32 igb_disable_pcie_master(struct e1000_hw *hw);
+s32 igb_force_mac_fc(struct e1000_hw *hw);
+s32 igb_get_auto_rd_done(struct e1000_hw *hw);
+s32 igb_get_bus_info_pcie(struct e1000_hw *hw);
+s32 igb_get_hw_semaphore(struct e1000_hw *hw);
+s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+s32 igb_id_led_init(struct e1000_hw *hw);
+s32 igb_led_off(struct e1000_hw *hw);
+void igb_update_mc_addr_list(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count);
+s32 igb_setup_link(struct e1000_hw *hw);
+s32 igb_validate_mdi_setting(struct e1000_hw *hw);
+s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
+ u32 offset, u8 data);
+
+void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
+void igb_clear_vfta(struct e1000_hw *hw);
+s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
+void igb_config_collision_dist(struct e1000_hw *hw);
+void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
+void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
+void igb_put_hw_semaphore(struct e1000_hw *hw);
+void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
+s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
+
+bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
+
+enum e1000_mng_mode {
+ e1000_mng_mode_none = 0,
+ e1000_mng_mode_asf,
+ e1000_mng_mode_pt,
+ e1000_mng_mode_ipmi,
+ e1000_mng_mode_host_if_only
+};
+
+#define E1000_FACTPS_MNGCG 0x20000000
+
+#define E1000_FWSM_MODE_MASK 0xE
+#define E1000_FWSM_MODE_SHIFT 1
+
+#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
+
+extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "e1000_mbx.h"
+
+/**
+ * igb_read_mbx - Reads a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfuly read message from buffer
+ **/
+s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (mbx->ops.read)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = 0;
+
+ if (size > mbx->size)
+ ret_val = -E1000_ERR_MBX;
+
+ else if (mbx->ops.write)
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg - checks to see if someone sent us mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_msg)
+ ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack - checks to see if someone sent us ACK
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_ack)
+ ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst - checks to see if other side has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbx->ops.check_for_rst)
+ ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * igb_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? 0 : -E1000_ERR_MBX;
+}
+
+/**
+ * igb_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = igb_poll_for_msg(hw, mbx_id);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = igb_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
+{
+ u32 mbvficr = rd32(E1000_MBVFICR);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (mbvficr & mask) {
+ ret_val = 0;
+ wr32(E1000_MBVFICR, mask);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_msg_pf - checks to see if the VF has sent mail
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_ack_pf - checks to see if the VF has ACKed
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
+ ret_val = 0;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_check_for_rst_pf - checks to see if the VF has reset
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ u32 vflre = rd32(E1000_VFLRE);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (vflre & (1 << vf_number)) {
+ ret_val = 0;
+ wr32(E1000_VFLRE, (1 << vf_number));
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_obtain_mbx_lock_pf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+ u32 p2v_mailbox;
+
+
+ /* Take ownership of the buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+ /* reserve mailbox for vf use */
+ p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+ if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+ ret_val = 0;
+
+ return ret_val;
+}
+
+/**
+ * igb_write_mbx_pf - Places a message in the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ igb_check_for_msg_pf(hw, vf_number);
+ igb_check_for_ack_pf(hw, vf_number);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ array_wr32(E1000_VMBMEM(vf_number), i, msg[i]);
+
+ /* Interrupt VF to tell it a message has been sent and release buffer*/
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+ return ret_val;
+
+}
+
+/**
+ * igb_read_mbx_pf - Read a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * This function copies a message from the mailbox buffer to the caller's
+ * memory buffer. The presumption is that the caller knows that there was
+ * a message due to a VF request so no polling for message is needed.
+ **/
+static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = array_rd32(E1000_VMBMEM(vf_number), i);
+
+ /* Acknowledge the message and release buffer */
+ wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * e1000_init_mbx_params_pf - set initial values for pf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+s32 igb_init_mbx_params_pf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ mbx->timeout = 0;
+ mbx->usec_delay = 0;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = igb_read_mbx_pf;
+ mbx->ops.write = igb_write_mbx_pf;
+ mbx->ops.read_posted = igb_read_posted_mbx;
+ mbx->ops.write_posted = igb_write_posted_mbx;
+ mbx->ops.check_for_msg = igb_check_for_msg_pf;
+ mbx->ops.check_for_ack = igb_check_for_ack_pf;
+ mbx->ops.check_for_rst = igb_check_for_rst_pf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return 0;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "e1000_hw.h"
+
+#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
+#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
+#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ clear to send requests */
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
+s32 igb_check_for_msg(struct e1000_hw *, u16);
+s32 igb_check_for_ack(struct e1000_hw *, u16);
+s32 igb_check_for_rst(struct e1000_hw *, u16);
+s32 igb_init_mbx_params_pf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_nvm.h"
+
+/**
+ * igb_raise_eec_clk - Raise EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Enable/Raise the EEPROM clock bit.
+ **/
+static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd | E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_lower_eec_clk - Lower EEPROM clock
+ * @hw: pointer to the HW structure
+ * @eecd: pointer to the EEPROM
+ *
+ * Clear/Lower the EEPROM clock bit.
+ **/
+static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
+{
+ *eecd = *eecd & ~E1000_EECD_SK;
+ wr32(E1000_EECD, *eecd);
+ wrfl();
+ udelay(hw->nvm.delay_usec);
+}
+
+/**
+ * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
+ * @hw: pointer to the HW structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ *
+ * We need to shift 'count' bits out to the EEPROM. So, the value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ **/
+static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ u32 mask;
+
+ mask = 0x01 << (count - 1);
+ if (nvm->type == e1000_nvm_eeprom_spi)
+ eecd |= E1000_EECD_DO;
+
+ do {
+ eecd &= ~E1000_EECD_DI;
+
+ if (data & mask)
+ eecd |= E1000_EECD_DI;
+
+ wr32(E1000_EECD, eecd);
+ wrfl();
+
+ udelay(nvm->delay_usec);
+
+ igb_raise_eec_clk(hw, &eecd);
+ igb_lower_eec_clk(hw, &eecd);
+
+ mask >>= 1;
+ } while (mask);
+
+ eecd &= ~E1000_EECD_DI;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to the HW structure
+ * @count: number of bits to shift in
+ *
+ * In order to read a register from the EEPROM, we need to shift 'count' bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the data out
+ * "DO" bit. During this "shifting in" process the data in "DI" bit should
+ * always be clear.
+ **/
+static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
+{
+ u32 eecd;
+ u32 i;
+ u16 data;
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < count; i++) {
+ data <<= 1;
+ igb_raise_eec_clk(hw, &eecd);
+
+ eecd = rd32(E1000_EECD);
+
+ eecd &= ~E1000_EECD_DI;
+ if (eecd & E1000_EECD_DO)
+ data |= 1;
+
+ igb_lower_eec_clk(hw, &eecd);
+ }
+
+ return data;
+}
+
+/**
+ * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
+ * @hw: pointer to the HW structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the EEPROM status bit for either read or write completion based
+ * upon the value of 'ee_reg'.
+ **/
+static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
+{
+ u32 attempts = 100000;
+ u32 i, reg = 0;
+ s32 ret_val = -E1000_ERR_NVM;
+
+ for (i = 0; i < attempts; i++) {
+ if (ee_reg == E1000_NVM_POLL_READ)
+ reg = rd32(E1000_EERD);
+ else
+ reg = rd32(E1000_EEWR);
+
+ if (reg & E1000_NVM_RW_REG_DONE) {
+ ret_val = 0;
+ break;
+ }
+
+ udelay(5);
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_acquire_nvm - Generic request for access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Set the EEPROM access request bit and wait for EEPROM access grant bit.
+ * Return successful if access grant bit set, else clear the request for
+ * EEPROM access and return -E1000_ERR_NVM (-1).
+ **/
+s32 igb_acquire_nvm(struct e1000_hw *hw)
+{
+ u32 eecd = rd32(E1000_EECD);
+ s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
+ s32 ret_val = 0;
+
+
+ wr32(E1000_EECD, eecd | E1000_EECD_REQ);
+ eecd = rd32(E1000_EECD);
+
+ while (timeout) {
+ if (eecd & E1000_EECD_GNT)
+ break;
+ udelay(5);
+ eecd = rd32(E1000_EECD);
+ timeout--;
+ }
+
+ if (!timeout) {
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+ hw_dbg("Could not acquire NVM grant\n");
+ ret_val = -E1000_ERR_NVM;
+ }
+
+ return ret_val;
+}
+
+/**
+ * igb_standby_nvm - Return EEPROM to standby state
+ * @hw: pointer to the HW structure
+ *
+ * Return the EEPROM to a standby state.
+ **/
+static void igb_standby_nvm(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Toggle CS to flush commands */
+ eecd |= E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ eecd &= ~E1000_EECD_CS;
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(nvm->delay_usec);
+ }
+}
+
+/**
+ * e1000_stop_nvm - Terminate EEPROM command
+ * @hw: pointer to the HW structure
+ *
+ * Terminates the current command by inverting the EEPROM's chip select pin.
+ **/
+static void e1000_stop_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ eecd = rd32(E1000_EECD);
+ if (hw->nvm.type == e1000_nvm_eeprom_spi) {
+ /* Pull CS high */
+ eecd |= E1000_EECD_CS;
+ igb_lower_eec_clk(hw, &eecd);
+ }
+}
+
+/**
+ * igb_release_nvm - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+void igb_release_nvm(struct e1000_hw *hw)
+{
+ u32 eecd;
+
+ e1000_stop_nvm(hw);
+
+ eecd = rd32(E1000_EECD);
+ eecd &= ~E1000_EECD_REQ;
+ wr32(E1000_EECD, eecd);
+}
+
+/**
+ * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
+ * @hw: pointer to the HW structure
+ *
+ * Setups the EEPROM for reading and writing.
+ **/
+static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(E1000_EECD);
+ s32 ret_val = 0;
+ u16 timeout = 0;
+ u8 spi_stat_reg;
+
+
+ if (nvm->type == e1000_nvm_eeprom_spi) {
+ /* Clear SK and CS */
+ eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
+ wr32(E1000_EECD, eecd);
+ wrfl();
+ udelay(1);
+ timeout = NVM_MAX_RETRY_SPI;
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared.
+ * The EEPROM will signal that the command has been completed
+ * by clearing bit 0 of the internal status register. If it's
+ * not cleared within 'timeout', then error out.
+ */
+ while (timeout) {
+ igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
+ hw->nvm.opcode_bits);
+ spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
+ if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ igb_standby_nvm(hw);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg("SPI NVM Status error\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_spi - Read EEPROM's using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM.
+ **/
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i = 0;
+ s32 ret_val;
+ u16 word_in;
+ u8 read_opcode = NVM_READ_OPCODE_SPI;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ ret_val = nvm->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ igb_standby_nvm(hw);
+
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ read_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
+
+ /*
+ * Read the data. SPI NVMs increment the address with each byte
+ * read and will roll over if reading beyond the end. This allows
+ * us to read the whole NVM from any offset
+ */
+ for (i = 0; i < words; i++) {
+ word_in = igb_shift_in_eec_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+
+release:
+ nvm->ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_nvm_eerd - Reads EEPROM using EERD register
+ * @hw: pointer to the HW structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eerd = 0;
+ s32 ret_val = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
+ E1000_NVM_RW_REG_START;
+
+ wr32(E1000_EERD, eerd);
+ ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
+ if (ret_val)
+ break;
+
+ data[i] = (rd32(E1000_EERD) >>
+ E1000_NVM_RW_REG_DATA);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_nvm_spi - Write to EEPROM using SPI
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * Writes data to EEPROM at offset using SPI interface.
+ *
+ * If e1000_update_nvm_checksum is not called after this function , the
+ * EEPROM will most likley contain an invalid checksum.
+ **/
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 widx = 0;
+
+ /*
+ * A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ hw_dbg("nvm parameter(s) out of bounds\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ msleep(10);
+
+ while (widx < words) {
+ u8 write_opcode = NVM_WRITE_OPCODE_SPI;
+
+ ret_val = igb_ready_nvm_eeprom(hw);
+ if (ret_val)
+ goto release;
+
+ igb_standby_nvm(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode) */
+ igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
+ nvm->opcode_bits);
+
+ igb_standby_nvm(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded in the
+ * opcode
+ */
+ if ((nvm->address_bits == 8) && (offset >= 128))
+ write_opcode |= NVM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
+ igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
+ nvm->address_bits);
+
+ /* Loop to allow for up to whole page write of eeprom */
+ while (widx < words) {
+ u16 word_out = data[widx];
+ word_out = (word_out >> 8) | (word_out << 8);
+ igb_shift_out_eec_bits(hw, word_out, 16);
+ widx++;
+
+ if ((((offset + widx) * 2) % nvm->page_size) == 0) {
+ igb_standby_nvm(hw);
+ break;
+ }
+ }
+ }
+
+ msleep(10);
+release:
+ hw->nvm.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_part_string - Read device part number
+ * @hw: pointer to the HW structure
+ * @part_num: pointer to device part number
+ * @part_num_size: size of part number buffer
+ *
+ * Reads the product board assembly (PBA) number from the EEPROM and stores
+ * the value in part_num.
+ **/
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
+{
+ s32 ret_val;
+ u16 nvm_data;
+ u16 pointer;
+ u16 offset;
+ u16 length;
+
+ if (part_num == NULL) {
+ hw_dbg("PBA string buffer was null\n");
+ ret_val = E1000_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ /*
+ * if nvm_data is not ptr guard the PBA must be in legacy format which
+ * means pointer is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (nvm_data != NVM_PBA_PTR_GUARD) {
+ hw_dbg("NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (part_num_size < 11) {
+ hw_dbg("PBA string buffer too small\n");
+ return E1000_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pointer */
+ part_num[0] = (nvm_data >> 12) & 0xF;
+ part_num[1] = (nvm_data >> 8) & 0xF;
+ part_num[2] = (nvm_data >> 4) & 0xF;
+ part_num[3] = nvm_data & 0xF;
+ part_num[4] = (pointer >> 12) & 0xF;
+ part_num[5] = (pointer >> 8) & 0xF;
+ part_num[6] = '-';
+ part_num[7] = 0;
+ part_num[8] = (pointer >> 4) & 0xF;
+ part_num[9] = pointer & 0xF;
+
+ /* put a null character on the end of our string */
+ part_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (part_num[offset] < 0xA)
+ part_num[offset] += '0';
+ else if (part_num[offset] < 0x10)
+ part_num[offset] += 'A' - 0xA;
+ }
+
+ goto out;
+ }
+
+ ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ hw_dbg("NVM PBA number section invalid length\n");
+ ret_val = E1000_ERR_NVM_PBA_SECTION;
+ goto out;
+ }
+ /* check if part_num buffer is big enough */
+ if (part_num_size < (((u32)length * 2) - 1)) {
+ hw_dbg("PBA string buffer too small\n");
+ ret_val = E1000_ERR_NO_SPACE;
+ goto out;
+ }
+
+ /* trim pba length from start of string */
+ pointer++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ part_num[offset * 2] = (u8)(nvm_data >> 8);
+ part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
+ }
+ part_num[offset * 2] = '\0';
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_mac_addr - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the EEPROM and stores the value.
+ * Since devices with two ports use the same EEPROM, we increment the
+ * last bit in the MAC address for the second port.
+ **/
+s32 igb_read_mac_addr(struct e1000_hw *hw)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = rd32(E1000_RAH(0));
+ rar_low = rd32(E1000_RAL(0));
+
+ for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+ hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ for (i = 0; i < ETH_ALEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return 0;
+}
+
+/**
+ * igb_validate_nvm_checksum - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+
+ if (checksum != (u16) NVM_SUM) {
+ hw_dbg("NVM Checksum Invalid\n");
+ ret_val = -E1000_ERR_NVM;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_update_nvm_checksum - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+s32 igb_update_nvm_checksum(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u16 checksum = 0;
+ u16 i, nvm_data;
+
+ for (i = 0; i < NVM_CHECKSUM_REG; i++) {
+ ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
+ if (ret_val) {
+ hw_dbg("NVM Read Error while updating checksum.\n");
+ goto out;
+ }
+ checksum += nvm_data;
+ }
+ checksum = (u16) NVM_SUM - checksum;
+ ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
+ if (ret_val)
+ hw_dbg("NVM Write Error while updating checksum.\n");
+
+out:
+ return ret_val;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_NVM_H_
+#define _E1000_NVM_H_
+
+s32 igb_acquire_nvm(struct e1000_hw *hw);
+void igb_release_nvm(struct e1000_hw *hw);
+s32 igb_read_mac_addr(struct e1000_hw *hw);
+s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
+s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
+ u32 part_num_size);
+s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
+s32 igb_validate_nvm_checksum(struct e1000_hw *hw);
+s32 igb_update_nvm_checksum(struct e1000_hw *hw);
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/if_ether.h>
+#include <linux/delay.h>
+
+#include "e1000_mac.h"
+#include "e1000_phy.h"
+
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl);
+static s32 igb_wait_autoneg(struct e1000_hw *hw);
+
+/* Cable length tables */
+static const u16 e1000_m88_cable_length_table[] =
+ { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_m88_cable_length_table) / \
+ sizeof(e1000_m88_cable_length_table[0]))
+
+static const u16 e1000_igp_2_cable_length_table[] =
+ { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
+ 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
+ 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
+ 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
+ 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
+ 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
+ 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
+ 104, 109, 114, 118, 121, 124};
+#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
+ (sizeof(e1000_igp_2_cable_length_table) / \
+ sizeof(e1000_igp_2_cable_length_table[0]))
+
+/**
+ * igb_check_reset_block - Check if PHY reset is blocked
+ * @hw: pointer to the HW structure
+ *
+ * Read the PHY management control register and check whether a PHY reset
+ * is blocked. If a reset is not blocked return 0, otherwise
+ * return E1000_BLK_PHY_RESET (12).
+ **/
+s32 igb_check_reset_block(struct e1000_hw *hw)
+{
+ u32 manc;
+
+ manc = rd32(E1000_MANC);
+
+ return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
+ E1000_BLK_PHY_RESET : 0;
+}
+
+/**
+ * igb_get_phy_id - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+s32 igb_get_phy_id(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_id;
+
+ ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id = (u32)(phy_id << 16);
+ udelay(20);
+ ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
+ if (ret_val)
+ goto out;
+
+ phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_reset_dsp - Reset PHY DSP
+ * @hw: pointer to the HW structure
+ *
+ * Reset the digital signal processor.
+ **/
+static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.write_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
+ if (ret_val)
+ goto out;
+
+ ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_mdic - Read MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the MDI control regsiter in the PHY at offset and stores the
+ * information read to data.
+ **/
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = ((offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_READ));
+
+ wr32(E1000_MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Read did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ *data = (u16) mdic;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_mdic - Write MDI control register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write to register at offset
+ *
+ * Writes data to MDI control register in the PHY at offset.
+ **/
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, mdic = 0;
+ s32 ret_val = 0;
+
+ if (offset > MAX_PHY_REG_ADDRESS) {
+ hw_dbg("PHY Address %d is out of range\n", offset);
+ ret_val = -E1000_ERR_PARAM;
+ goto out;
+ }
+
+ /*
+ * Set up Op-code, Phy Address, and register offset in the MDI
+ * Control register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ mdic = (((u32)data) |
+ (offset << E1000_MDIC_REG_SHIFT) |
+ (phy->addr << E1000_MDIC_PHY_SHIFT) |
+ (E1000_MDIC_OP_WRITE));
+
+ wr32(E1000_MDIC, mdic);
+
+ /*
+ * Poll the ready bit to see if the MDI read completed
+ * Increasing the time out as testing showed failures with
+ * the lower time out
+ */
+ for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
+ udelay(50);
+ mdic = rd32(E1000_MDIC);
+ if (mdic & E1000_MDIC_READY)
+ break;
+ }
+ if (!(mdic & E1000_MDIC_READY)) {
+ hw_dbg("MDI Write did not complete\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+ if (mdic & E1000_MDIC_ERROR) {
+ hw_dbg("MDI Error\n");
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_read_phy_reg_i2c - Read PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Reads the PHY register at offset using the i2c interface and stores the
+ * retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+
+
+ /*
+ * Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ (E1000_I2CCMD_OPCODE_READ));
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Read did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ /* Need to byte-swap the 16-bit value. */
+ *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+ return 0;
+}
+
+/**
+ * igb_write_phy_reg_i2c - Write PHY register using i2c
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ u32 i, i2ccmd = 0;
+ u16 phy_data_swapped;
+
+
+ /* Swap the data bytes for the I2C interface */
+ phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+ /*
+ * Set up Op-code, Phy Address, and register address in the I2CCMD
+ * register. The MAC will take care of interfacing with the
+ * PHY to retrieve the desired data.
+ */
+ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+ (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+ E1000_I2CCMD_OPCODE_WRITE |
+ phy_data_swapped);
+
+ wr32(E1000_I2CCMD, i2ccmd);
+
+ /* Poll the ready bit to see if the I2C read completed */
+ for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+ udelay(50);
+ i2ccmd = rd32(E1000_I2CCMD);
+ if (i2ccmd & E1000_I2CCMD_READY)
+ break;
+ }
+ if (!(i2ccmd & E1000_I2CCMD_READY)) {
+ hw_dbg("I2CCMD Write did not complete\n");
+ return -E1000_ERR_PHY;
+ }
+ if (i2ccmd & E1000_I2CCMD_ERROR) {
+ hw_dbg("I2CCMD Error bit set\n");
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * igb_read_phy_reg_igp - Read igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to be read
+ * @data: pointer to the read data
+ *
+ * Acquires semaphore, if necessary, then reads the PHY register at offset
+ * and storing the retrieved information in data. Release any acquired
+ * semaphores before exiting.
+ **/
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_write_phy_reg_igp - Write igp PHY register
+ * @hw: pointer to the HW structure
+ * @offset: register offset to write to
+ * @data: data to write at register offset
+ *
+ * Acquires semaphore, if necessary, then writes the data to PHY register
+ * at the offset. Release any acquired semaphores before exiting.
+ **/
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ s32 ret_val = 0;
+
+ if (!(hw->phy.ops.acquire))
+ goto out;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ if (offset > MAX_PHY_MULTI_PAGE_REG) {
+ ret_val = igb_write_phy_reg_mdic(hw,
+ IGP01E1000_PHY_PAGE_SELECT,
+ (u16)offset);
+ if (ret_val) {
+ hw->phy.ops.release(hw);
+ goto out;
+ }
+ }
+
+ ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
+ data);
+
+ hw->phy.ops.release(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up Carrier-sense on Transmit and downshift values.
+ **/
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ if (phy->type == e1000_phy_82580) {
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
+
+ /* Enable downshift */
+ phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
+
+ ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
+ * and downshift values are set also.
+ **/
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* Enable CRS on TX. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+
+ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ if (phy->revision < E1000_REVISION_4) {
+ /*
+ * Force TX_CLK in the Extended PHY Specific Control Register
+ * to 25MHz clock.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+
+ if ((phy->revision == E1000_REVISION_2) &&
+ (phy->id == M88E1111_I_PHY_ID)) {
+ /* 82573L PHY - set the downshift counter to 5x. */
+ phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
+ phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
+ } else {
+ /* Configure Master and Slave downshift values */
+ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
+ phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
+ M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
+ }
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
+ phy_data);
+ if (ret_val)
+ goto out;
+ }
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
+ * Also enables and sets the downshift parameters.
+ **/
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ /* Enable CRS on Tx. This must be set for half-duplex operation. */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Options:
+ * MDI/MDI-X = 0 (default)
+ * 0 - Auto for all speeds
+ * 1 - MDI mode
+ * 2 - MDI-X mode
+ * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
+ */
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+
+ switch (phy->mdix) {
+ case 1:
+ phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
+ break;
+ case 2:
+ phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
+ break;
+ case 3:
+ /* M88E1112 does not support this mode) */
+ if (phy->id != M88E1112_E_PHY_ID) {
+ phy_data |= M88E1000_PSCR_AUTO_X_1000T;
+ break;
+ }
+ case 0:
+ default:
+ phy_data |= M88E1000_PSCR_AUTO_X_MODE;
+ break;
+ }
+
+ /*
+ * Options:
+ * disable_polarity_correction = 0 (default)
+ * Automatic Correction for Reversed Cable Polarity
+ * 0 - Disabled
+ * 1 - Enabled
+ */
+ phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
+ if (phy->disable_polarity_correction == 1)
+ phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
+
+ /* Enable downshift and setting it to X6 */
+ phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
+ phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
+
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Commit the changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val) {
+ hw_dbg("Error committing the PHY changes\n");
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_setup_igp - Setup igp PHY's for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
+ * igp PHY's.
+ **/
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ if (phy->reset_disable) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY.\n");
+ goto out;
+ }
+
+ /*
+ * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
+ * timeout issues when LFS is enabled.
+ */
+ msleep(100);
+
+ /*
+ * The NVM settings will configure LPLU in D3 for
+ * non-IGP1 PHYs.
+ */
+ if (phy->type == e1000_phy_igp) {
+ /* disable lplu d3 during driver init */
+ if (phy->ops.set_d3_lplu_state)
+ ret_val = phy->ops.set_d3_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D3\n");
+ goto out;
+ }
+ }
+
+ /* disable lplu d0 during driver init */
+ ret_val = phy->ops.set_d0_lplu_state(hw, false);
+ if (ret_val) {
+ hw_dbg("Error Disabling LPLU D0\n");
+ goto out;
+ }
+ /* Configure mdi-mdix settings */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+
+ switch (phy->mdix) {
+ case 1:
+ data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 2:
+ data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
+ break;
+ case 0:
+ default:
+ data |= IGP01E1000_PSCR_AUTO_MDIX;
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
+ if (ret_val)
+ goto out;
+
+ /* set auto-master slave resolution settings */
+ if (hw->mac.autoneg) {
+ /*
+ * when autonegotiation advertisement is only 1000Mbps then we
+ * should disable SmartSpeed and enable Auto MasterSlave
+ * resolution as hardware default.
+ */
+ if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
+ /* Disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* Set auto Master/Slave resolution process */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~CR_1000T_MS_ENABLE;
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
+ if (ret_val)
+ goto out;
+
+ /* load defaults for future use */
+ phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
+ ((data & CR_1000T_MS_VALUE) ?
+ e1000_ms_force_master :
+ e1000_ms_force_slave) :
+ e1000_ms_auto;
+
+ switch (phy->ms_type) {
+ case e1000_ms_force_master:
+ data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_force_slave:
+ data |= CR_1000T_MS_ENABLE;
+ data &= ~(CR_1000T_MS_VALUE);
+ break;
+ case e1000_ms_auto:
+ data &= ~CR_1000T_MS_ENABLE;
+ default:
+ break;
+ }
+ ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_copper_link_autoneg - Setup/Enable autoneg for copper link
+ * @hw: pointer to the HW structure
+ *
+ * Performs initial bounds checking on autoneg advertisement parameter, then
+ * configure to advertise the full capability. Setup the PHY to autoneg
+ * and restart the negotiation process between the link partner. If
+ * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
+ **/
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_ctrl;
+
+ /*
+ * Perform some bounds checking on the autoneg advertisement
+ * parameter.
+ */
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /*
+ * If autoneg_advertised is zero, we assume it was not defaulted
+ * by the calling code so we set to advertise full capability.
+ */
+ if (phy->autoneg_advertised == 0)
+ phy->autoneg_advertised = phy->autoneg_mask;
+
+ hw_dbg("Reconfiguring auto-neg advertisement params\n");
+ ret_val = igb_phy_setup_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error Setting up Auto-Negotiation\n");
+ goto out;
+ }
+ hw_dbg("Restarting Auto-Neg\n");
+
+ /*
+ * Restart auto-negotiation by setting the Auto Neg Enable bit and
+ * the Auto Neg Restart bit in the PHY control register.
+ */
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Does the user want to wait for Auto-Neg to complete here, or
+ * check at a later time (for example, callback routine).
+ */
+ if (phy->autoneg_wait_to_complete) {
+ ret_val = igb_wait_autoneg(hw);
+ if (ret_val) {
+ hw_dbg("Error while waiting for "
+ "autoneg to complete\n");
+ goto out;
+ }
+ }
+
+ hw->mac.get_link_status = true;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_setup_autoneg - Configure PHY for auto-negotiation
+ * @hw: pointer to the HW structure
+ *
+ * Reads the MII auto-neg advertisement register and/or the 1000T control
+ * register and if the PHY is already setup for auto-negotiation, then
+ * return successful. Otherwise, setup advertisement and flow control to
+ * the appropriate values for the wanted auto-negotiation.
+ **/
+static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 mii_autoneg_adv_reg;
+ u16 mii_1000t_ctrl_reg = 0;
+
+ phy->autoneg_advertised &= phy->autoneg_mask;
+
+ /* Read the MII Auto-Neg Advertisement Register (Address 4). */
+ ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ /* Read the MII 1000Base-T Control Register (Address 9). */
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
+ &mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+ /*
+ * Need to parse both autoneg_advertised and fc and set up
+ * the appropriate PHY registers. First we will parse for
+ * autoneg_advertised software override. Since we can advertise
+ * a plethora of combinations, we need to check each bit
+ * individually.
+ */
+
+ /*
+ * First we clear all the 10/100 mb speed bits in the Auto-Neg
+ * Advertisement Register (Address 4) and the 1000 mb speed bits in
+ * the 1000Base-T Control Register (Address 9).
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
+ NWAY_AR_100TX_HD_CAPS |
+ NWAY_AR_10T_FD_CAPS |
+ NWAY_AR_10T_HD_CAPS);
+ mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
+
+ hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
+
+ /* Do we want to advertise 10 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
+ hw_dbg("Advertise 10mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
+ }
+
+ /* Do we want to advertise 10 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
+ hw_dbg("Advertise 10mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Half Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
+ hw_dbg("Advertise 100mb Half duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
+ }
+
+ /* Do we want to advertise 100 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
+ hw_dbg("Advertise 100mb Full duplex\n");
+ mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
+ }
+
+ /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
+ if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
+ hw_dbg("Advertise 1000mb Half duplex request denied!\n");
+
+ /* Do we want to advertise 1000 Mb Full Duplex? */
+ if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
+ hw_dbg("Advertise 1000mb Full duplex\n");
+ mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
+ }
+
+ /*
+ * Check for a software override of the flow control settings, and
+ * setup the PHY advertisement registers accordingly. If
+ * auto-negotiation is enabled, then software will have to set the
+ * "PAUSE" bits to the correct value in the Auto-Negotiation
+ * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
+ * negotiation.
+ *
+ * The possible values of the "fc" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: No software override. The flow control configuration
+ * in the EEPROM is used.
+ */
+ switch (hw->fc.current_mode) {
+ case e1000_fc_none:
+ /*
+ * Flow control (RX & TX) is completely disabled by a
+ * software over-ride.
+ */
+ mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_rx_pause:
+ /*
+ * RX Flow control is enabled, and TX Flow control is
+ * disabled, by a software over-ride.
+ *
+ * Since there really isn't a way to advertise that we are
+ * capable of RX Pause ONLY, we will advertise that we
+ * support both symmetric and asymmetric RX PAUSE. Later
+ * (in e1000_config_fc_after_link_up) we will disable the
+ * hw's ability to send PAUSE frames.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ case e1000_fc_tx_pause:
+ /*
+ * TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
+ mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
+ break;
+ case e1000_fc_full:
+ /*
+ * Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
+ break;
+ default:
+ hw_dbg("Flow control param set incorrectly\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
+
+ if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
+ ret_val = phy->ops.write_reg(hw,
+ PHY_1000T_CTRL,
+ mii_1000t_ctrl_reg);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_setup_copper_link - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Calls the appropriate function to configure the link for auto-neg or forced
+ * speed and duplex. Then we check for link, once link is established calls
+ * to configure collision distance and flow control are called. If link is
+ * not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ bool link;
+
+
+ if (hw->mac.autoneg) {
+ /*
+ * Setup autoneg and flow control advertisement and perform
+ * autonegotiation.
+ */
+ ret_val = igb_copper_link_autoneg(hw);
+ if (ret_val)
+ goto out;
+ } else {
+ /*
+ * PHY will be set to 10H, 10F, 100H or 100F
+ * depending on user settings.
+ */
+ hw_dbg("Forcing Speed and Duplex\n");
+ ret_val = hw->phy.ops.force_speed_duplex(hw);
+ if (ret_val) {
+ hw_dbg("Error Forcing Speed and Duplex\n");
+ goto out;
+ }
+ }
+
+ /*
+ * Check link status. Wait up to 100 microseconds for link to become
+ * valid.
+ */
+ ret_val = igb_phy_has_link(hw,
+ COPPER_LINK_UP_LIMIT,
+ 10,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (link) {
+ hw_dbg("Valid link established!!!\n");
+ igb_config_collision_dist(hw);
+ ret_val = igb_config_fc_after_link_up(hw);
+ } else {
+ hw_dbg("Unable to establish link!!!\n");
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. IGP requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
+ phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
+
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("IGP PSCR: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
+
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Resets the PHY to commit the
+ * changes. If time expires while waiting for link up, we reset the DSP.
+ * After reset, TX_CLK and CRS on TX must be set. Return successful upon
+ * successful completion, else return corresponding error code.
+ **/
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("M88E1000 PSCR: %X\n", phy_data);
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Reset the phy to commit changes. */
+ ret_val = igb_phy_sw_reset(hw);
+ if (ret_val)
+ goto out;
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
+
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ if (hw->phy.type != e1000_phy_m88 ||
+ hw->phy.id == I347AT4_E_PHY_ID ||
+ hw->phy.id == M88E1112_E_PHY_ID) {
+ hw_dbg("Link taking longer than expected.\n");
+ } else {
+
+ /*
+ * We didn't get link.
+ * Reset the DSP and cross our fingers.
+ */
+ ret_val = phy->ops.write_reg(hw,
+ M88E1000_PHY_PAGE_SELECT,
+ 0x001d);
+ if (ret_val)
+ goto out;
+ ret_val = igb_phy_reset_dsp(hw);
+ if (ret_val)
+ goto out;
+ }
+ }
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
+ 100000, &link);
+ if (ret_val)
+ goto out;
+ }
+
+ if (hw->phy.type != e1000_phy_m88 ||
+ hw->phy.id == I347AT4_E_PHY_ID ||
+ hw->phy.id == M88E1112_E_PHY_ID)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Resetting the phy means we need to re-force TX_CLK in the
+ * Extended PHY Specific Control Register to 25MHz clock from
+ * the reset value of 2.5MHz.
+ */
+ phy_data |= M88E1000_EPSCR_TX_CLK_25;
+ ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * In addition, we must re-enable CRS on Tx for both half and full
+ * duplex.
+ */
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
+ ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
+ * @hw: pointer to the HW structure
+ * @phy_ctrl: pointer to current value of PHY_CONTROL
+ *
+ * Forces speed and duplex on the PHY by doing the following: disable flow
+ * control, force speed/duplex on the MAC, disable auto speed detection,
+ * disable auto-negotiation, configure duplex, configure speed, configure
+ * the collision distance, write configuration to CTRL register. The
+ * caller must write to the PHY_CONTROL register for these settings to
+ * take affect.
+ **/
+static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
+ u16 *phy_ctrl)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 ctrl;
+
+ /* Turn off flow control when forcing speed/duplex */
+ hw->fc.current_mode = e1000_fc_none;
+
+ /* Force speed/duplex on the mac */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ctrl &= ~E1000_CTRL_SPD_SEL;
+
+ /* Disable Auto Speed Detection */
+ ctrl &= ~E1000_CTRL_ASDE;
+
+ /* Disable autoneg on the phy */
+ *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
+
+ /* Forcing Full or Half Duplex? */
+ if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
+ ctrl &= ~E1000_CTRL_FD;
+ *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
+ hw_dbg("Half Duplex\n");
+ } else {
+ ctrl |= E1000_CTRL_FD;
+ *phy_ctrl |= MII_CR_FULL_DUPLEX;
+ hw_dbg("Full Duplex\n");
+ }
+
+ /* Forcing 10mb or 100mb? */
+ if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
+ ctrl |= E1000_CTRL_SPD_100;
+ *phy_ctrl |= MII_CR_SPEED_100;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
+ hw_dbg("Forcing 100mb\n");
+ } else {
+ ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
+ *phy_ctrl |= MII_CR_SPEED_10;
+ *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
+ hw_dbg("Forcing 10mb\n");
+ }
+
+ igb_config_collision_dist(hw);
+
+ wr32(E1000_CTRL, ctrl);
+}
+
+/**
+ * igb_set_d3_lplu_state - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * and SmartSpeed is disabled when active is true, else clear lplu for D3
+ * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 data;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ goto out;
+
+ if (!active) {
+ data &= ~IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+ /*
+ * LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = phy->ops.read_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw,
+ IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ goto out;
+ }
+ } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= IGP02E1000_PM_D3_LPLU;
+ ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
+ data);
+ if (ret_val)
+ goto out;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ goto out;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_downshift - Checks whether a downshift in speed occurred
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns 1
+ *
+ * A downshift is detected by querying the PHY link health.
+ **/
+s32 igb_check_downshift(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, offset, mask;
+
+ switch (phy->type) {
+ case e1000_phy_m88:
+ case e1000_phy_gg82563:
+ offset = M88E1000_PHY_SPEC_STATUS;
+ mask = M88E1000_PSSR_DOWNSHIFT;
+ break;
+ case e1000_phy_igp_2:
+ case e1000_phy_igp:
+ case e1000_phy_igp_3:
+ offset = IGP01E1000_PHY_LINK_HEALTH;
+ mask = IGP01E1000_PLHR_SS_DOWNGRADE;
+ break;
+ default:
+ /* speed downshift not supported */
+ phy->speed_downgraded = false;
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &phy_data);
+
+ if (!ret_val)
+ phy->speed_downgraded = (phy_data & mask) ? true : false;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_m88 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_check_polarity_igp - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY port status register, and the
+ * current speed (since there is no polarity at 100Mbps).
+ **/
+static s32 igb_check_polarity_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data, offset, mask;
+
+ /*
+ * Polarity is determined based on the speed of
+ * our connection.
+ */
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ offset = IGP01E1000_PHY_PCS_INIT_REG;
+ mask = IGP01E1000_PHY_POLARITY_MASK;
+ } else {
+ /*
+ * This really only applies to 10Mbps since
+ * there is no polarity for 100Mbps (always 0).
+ */
+ offset = IGP01E1000_PHY_PORT_STATUS;
+ mask = IGP01E1000_PSSR_POLARITY_REVERSED;
+ }
+
+ ret_val = phy->ops.read_reg(hw, offset, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & mask)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_wait_autoneg - Wait for auto-neg compeletion
+ * @hw: pointer to the HW structure
+ *
+ * Waits for auto-negotiation to complete or for the auto-negotiation time
+ * limit to expire, which ever happens first.
+ **/
+static s32 igb_wait_autoneg(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
+ for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_AUTONEG_COMPLETE)
+ break;
+ msleep(100);
+ }
+
+ /*
+ * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
+ * has completed.
+ */
+ return ret_val;
+}
+
+/**
+ * igb_phy_has_link - Polls PHY for link
+ * @hw: pointer to the HW structure
+ * @iterations: number of times to poll for link
+ * @usec_interval: delay between polling attempts
+ * @success: pointer to whether polling was successful or not
+ *
+ * Polls the PHY status register for link, 'iterations' number of times.
+ **/
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success)
+{
+ s32 ret_val = 0;
+ u16 i, phy_status;
+
+ for (i = 0; i < iterations; i++) {
+ /*
+ * Some PHYs require the PHY_STATUS register to be read
+ * twice due to the link bit being sticky. No harm doing
+ * it across the board.
+ */
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val) {
+ /*
+ * If the first read fails, another entity may have
+ * ownership of the resources, wait and try again to
+ * see if they have relinquished the resources yet.
+ */
+ udelay(usec_interval);
+ }
+ ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
+ if (ret_val)
+ break;
+ if (phy_status & MII_SR_LINK_STATUS)
+ break;
+ if (usec_interval >= 1000)
+ mdelay(usec_interval/1000);
+ else
+ udelay(usec_interval);
+ }
+
+ *success = (i < iterations) ? true : false;
+
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_m88 - Determine cable length for m88 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY specific status register to retrieve the cable length
+ * information. The cable length is determined by averaging the minimum and
+ * maximum values to get the "average" cable length. The m88 PHY has four
+ * possible cable length values, which are:
+ * Register Value Cable Length
+ * 0 < 50 meters
+ * 1 50 - 80 meters
+ * 2 80 - 110 meters
+ * 3 110 - 140 meters
+ * 4 > 140 meters
+ **/
+s32 igb_get_cable_length_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, index;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, phy_data2, index, default_page, is_cm;
+
+ switch (hw->phy.id) {
+ case I347AT4_E_PHY_ID:
+ /* Remember the original page select and set it to 7 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
+ if (ret_val)
+ goto out;
+
+ /* Get cable length from PHY Cable Diagnostics Control Reg */
+ ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ /* Check if the unit of cable length is meters or cm */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
+ if (ret_val)
+ goto out;
+
+ is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT);
+
+ /* Populate the phy structure with cable length in meters */
+ phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
+ phy->cable_length = phy_data / (is_cm ? 100 : 1);
+
+ /* Reset the page selec to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+ break;
+ case M88E1112_E_PHY_ID:
+ /* Remember the original page select and set it to 5 */
+ ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
+ &default_page);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
+ &phy_data);
+ if (ret_val)
+ goto out;
+
+ index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
+ M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+ if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ phy->min_cable_length = e1000_m88_cable_length_table[index];
+ phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
+
+ phy->cable_length = (phy->min_cable_length +
+ phy->max_cable_length) / 2;
+
+ /* Reset the page select to its original value */
+ ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
+ default_page);
+ if (ret_val)
+ goto out;
+
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
+ * @hw: pointer to the HW structure
+ *
+ * The automatic gain control (agc) normalizes the amplitude of the
+ * received signal, adjusting for the attenuation produced by the
+ * cable. By reading the AGC registers, which represent the
+ * combination of coarse and fine gain value, the value can be put
+ * into a lookup table to obtain the approximate cable length
+ * for each channel.
+ **/
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 phy_data, i, agc_value = 0;
+ u16 cur_agc_index, max_agc_index = 0;
+ u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
+ static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
+ IGP02E1000_PHY_AGC_A,
+ IGP02E1000_PHY_AGC_B,
+ IGP02E1000_PHY_AGC_C,
+ IGP02E1000_PHY_AGC_D
+ };
+
+ /* Read the AGC registers for all channels */
+ for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
+ ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Getting bits 15:9, which represent the combination of
+ * coarse and fine gain values. The result is a number
+ * that can be put into the lookup table to obtain the
+ * approximate cable length.
+ */
+ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
+ IGP02E1000_AGC_LENGTH_MASK;
+
+ /* Array index bound check. */
+ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
+ (cur_agc_index == 0)) {
+ ret_val = -E1000_ERR_PHY;
+ goto out;
+ }
+
+ /* Remove min & max AGC values from calculation. */
+ if (e1000_igp_2_cable_length_table[min_agc_index] >
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ min_agc_index = cur_agc_index;
+ if (e1000_igp_2_cable_length_table[max_agc_index] <
+ e1000_igp_2_cable_length_table[cur_agc_index])
+ max_agc_index = cur_agc_index;
+
+ agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
+ }
+
+ agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
+ e1000_igp_2_cable_length_table[max_agc_index]);
+ agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
+
+ /* Calculate cable length with the error range of +/- 10 meters. */
+ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
+ (agc_value - IGP02E1000_AGC_RANGE) : 0;
+ phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
+
+ phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_m88 - Retrieve PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Valid for only copper links. Read the PHY status register (sticky read)
+ * to verify that link is up. Read the PHY special control register to
+ * determine the polarity and 10base-T extended distance. Read the PHY
+ * special status register to determine MDI/MDIx and current speed. If
+ * speed is 1000, then determine cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_m88(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+ if (phy->media_type != e1000_media_type_copper) {
+ hw_dbg("Phy info is only valid for copper media\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
+ ? true : false;
+
+ ret_val = igb_check_polarity_m88(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
+
+ if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ /* Set values to "undefined" */
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_igp - Retrieve igp PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_igp(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_igp(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
+
+ if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
+ IGP01E1000_PSSR_SPEED_1000MBPS) {
+ ret_val = phy->ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_sw_reset - PHY software reset
+ * @hw: pointer to the HW structure
+ *
+ * Does a software reset of the PHY by reading the PHY control register and
+ * setting/write the control register reset bit to the PHY.
+ **/
+s32 igb_phy_sw_reset(struct e1000_hw *hw)
+{
+ s32 ret_val = 0;
+ u16 phy_ctrl;
+
+ if (!(hw->phy.ops.read_reg))
+ goto out;
+
+ ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ phy_ctrl |= MII_CR_RESET;
+ ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
+ if (ret_val)
+ goto out;
+
+ udelay(1);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_hw_reset - PHY hardware reset
+ * @hw: pointer to the HW structure
+ *
+ * Verify the reset block is not blocking us from resetting. Acquire
+ * semaphore (if necessary) and read/set/write the device control reset
+ * bit in the PHY. Wait the appropriate delay time for the device to
+ * reset and relase the semaphore (if necessary).
+ **/
+s32 igb_phy_hw_reset(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u32 ctrl;
+
+ ret_val = igb_check_reset_block(hw);
+ if (ret_val) {
+ ret_val = 0;
+ goto out;
+ }
+
+ ret_val = phy->ops.acquire(hw);
+ if (ret_val)
+ goto out;
+
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
+ wrfl();
+
+ udelay(phy->reset_delay_us);
+
+ wr32(E1000_CTRL, ctrl);
+ wrfl();
+
+ udelay(150);
+
+ phy->ops.release(hw);
+
+ ret_val = phy->ops.get_cfg_done(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_phy_init_script_igp3 - Inits the IGP3 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
+ **/
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
+{
+ hw_dbg("Running IGP 3 PHY init script\n");
+
+ /* PHY init IGP 3 */
+ /* Enable rise/fall, 10-mode work in class-A */
+ hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
+ /* Remove all caps from Replica path filter */
+ hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
+ /* Bias trimming for ADC, AFE and Driver (Default) */
+ hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
+ /* Increase Hybrid poly bias */
+ hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
+ /* Add 4% to TX amplitude in Giga mode */
+ hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
+ /* Disable trimming (TTT) */
+ hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
+ /* Poly DC correction to 94.6% + 2% for all channels */
+ hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
+ /* ABS DC correction to 95.9% */
+ hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
+ /* BG temp curve trim */
+ hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
+ /* Increasing ADC OPAMP stage 1 currents to max */
+ hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
+ /* Force 1000 ( required for enabling PHY regs configuration) */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
+ /* Set upd_freq to 6 */
+ hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
+ /* Disable NPDFE */
+ hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
+ /* Disable adaptive fixed FFE (Default) */
+ hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
+ /* Enable FFE hysteresis */
+ hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
+ /* Fixed FFE for short cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
+ /* Fixed FFE for medium cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
+ /* Fixed FFE for long cable lengths */
+ hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
+ /* Enable Adaptive Clip Threshold */
+ hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
+ /* AHT reset limit to 1 */
+ hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
+ /* Set AHT master delay to 127 msec */
+ hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
+ /* Set scan bits for AHT */
+ hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
+ /* Set AHT Preset bits */
+ hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
+ /* Change integ_factor of channel A to 3 */
+ hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
+ /* Change prop_factor of channels BCD to 8 */
+ hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
+ /* Change cg_icount + enable integbp for channels BCD */
+ hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
+ /*
+ * Change cg_icount + enable integbp + change prop_factor_master
+ * to 8 for channel A
+ */
+ hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
+ /* Disable AHT in Slave mode on channel A */
+ hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
+ /*
+ * Enable LPLU and disable AN to 1000 in non-D0a states,
+ * Enable SPD+B2B
+ */
+ hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
+ /* Enable restart AN on an1000_dis change */
+ hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
+ /* Enable wh_fifo read clock in 10/100 modes */
+ hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
+ /* Restart AN, Speed selection is 1000 */
+ hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
+
+ return 0;
+}
+
+/**
+ * igb_power_up_phy_copper - Restore copper link in case of PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, restore the link to previous settings.
+ **/
+void igb_power_up_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg &= ~MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+}
+
+/**
+ * igb_power_down_phy_copper - Power down copper PHY
+ * @hw: pointer to the HW structure
+ *
+ * Power down PHY to save power when interface is down and wake on lan
+ * is not enabled.
+ **/
+void igb_power_down_phy_copper(struct e1000_hw *hw)
+{
+ u16 mii_reg = 0;
+
+ /* The PHY will retain its settings across a power down/up cycle */
+ hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
+ mii_reg |= MII_CR_POWER_DOWN;
+ hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
+ msleep(1);
+}
+
+/**
+ * igb_check_polarity_82580 - Checks the polarity.
+ * @hw: pointer to the HW structure
+ *
+ * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
+ *
+ * Polarity is determined based on the PHY specific status register.
+ **/
+static s32 igb_check_polarity_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+
+ if (!ret_val)
+ phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
+ ? e1000_rev_polarity_reversed
+ : e1000_rev_polarity_normal;
+
+ return ret_val;
+}
+
+/**
+ * igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Calls the PHY setup function to force speed and duplex. Clears the
+ * auto-crossover to force MDI manually. Waits for link and returns
+ * successful if link up is successful, else -E1000_ERR_PHY (-2).
+ **/
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data;
+ bool link;
+
+
+ ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
+ if (ret_val)
+ goto out;
+
+ igb_phy_force_speed_duplex_setup(hw, &phy_data);
+
+ ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
+ if (ret_val)
+ goto out;
+
+ /*
+ * Clear Auto-Crossover to force MDI manually. 82580 requires MDI
+ * forced whenever speed and duplex are forced.
+ */
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
+ if (ret_val)
+ goto out;
+
+ phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
+ phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
+
+ ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
+ if (ret_val)
+ goto out;
+
+ hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
+
+ udelay(1);
+
+ if (phy->autoneg_wait_to_complete) {
+ hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
+
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+
+ if (!link)
+ hw_dbg("Link taking longer than expected.\n");
+
+ /* Try once more */
+ ret_val = igb_phy_has_link(hw,
+ PHY_FORCE_LIMIT,
+ 100000,
+ &link);
+ if (ret_val)
+ goto out;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_phy_info_82580 - Retrieve I82580 PHY information
+ * @hw: pointer to the HW structure
+ *
+ * Read PHY status to determine if link is up. If link is up, then
+ * set/determine 10base-T extended distance and polarity correction. Read
+ * PHY port status to determine MDI/MDIx and speed. Based on the speed,
+ * determine on the cable length, local and remote receiver.
+ **/
+s32 igb_get_phy_info_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+ bool link;
+
+
+ ret_val = igb_phy_has_link(hw, 1, 0, &link);
+ if (ret_val)
+ goto out;
+
+ if (!link) {
+ hw_dbg("Phy info is only valid if link is up\n");
+ ret_val = -E1000_ERR_CONFIG;
+ goto out;
+ }
+
+ phy->polarity_correction = true;
+
+ ret_val = igb_check_polarity_82580(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
+ if (ret_val)
+ goto out;
+
+ phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
+
+ if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
+ I82580_PHY_STATUS2_SPEED_1000MBPS) {
+ ret_val = hw->phy.ops.get_cable_length(hw);
+ if (ret_val)
+ goto out;
+
+ ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
+ if (ret_val)
+ goto out;
+
+ phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+
+ phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
+ ? e1000_1000t_rx_status_ok
+ : e1000_1000t_rx_status_not_ok;
+ } else {
+ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
+ phy->local_rx = e1000_1000t_rx_status_undefined;
+ phy->remote_rx = e1000_1000t_rx_status_undefined;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * igb_get_cable_length_82580 - Determine cable length for 82580 PHY
+ * @hw: pointer to the HW structure
+ *
+ * Reads the diagnostic status register and verifies result is valid before
+ * placing it in the phy_cable_length field.
+ **/
+s32 igb_get_cable_length_82580(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_data, length;
+
+
+ ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
+ if (ret_val)
+ goto out;
+
+ length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
+ I82580_DSTATUS_CABLE_LENGTH_SHIFT;
+
+ if (length == E1000_CABLE_LENGTH_UNDEFINED)
+ ret_val = -E1000_ERR_PHY;
+
+ phy->cable_length = length;
+
+out:
+ return ret_val;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_PHY_H_
+#define _E1000_PHY_H_
+
+enum e1000_ms_type {
+ e1000_ms_hw_default = 0,
+ e1000_ms_force_master,
+ e1000_ms_force_slave,
+ e1000_ms_auto
+};
+
+enum e1000_smart_speed {
+ e1000_smart_speed_default = 0,
+ e1000_smart_speed_on,
+ e1000_smart_speed_off
+};
+
+s32 igb_check_downshift(struct e1000_hw *hw);
+s32 igb_check_reset_block(struct e1000_hw *hw);
+s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
+s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88(struct e1000_hw *hw);
+s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
+s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
+s32 igb_get_phy_id(struct e1000_hw *hw);
+s32 igb_get_phy_info_igp(struct e1000_hw *hw);
+s32 igb_get_phy_info_m88(struct e1000_hw *hw);
+s32 igb_phy_sw_reset(struct e1000_hw *hw);
+s32 igb_phy_hw_reset(struct e1000_hw *hw);
+s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32 igb_setup_copper_link(struct e1000_hw *hw);
+s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
+ u32 usec_interval, bool *success);
+void igb_power_up_phy_copper(struct e1000_hw *hw);
+void igb_power_down_phy_copper(struct e1000_hw *hw);
+s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
+s32 igb_copper_link_setup_82580(struct e1000_hw *hw);
+s32 igb_get_phy_info_82580(struct e1000_hw *hw);
+s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
+s32 igb_get_cable_length_82580(struct e1000_hw *hw);
+
+/* IGP01E1000 Specific Registers */
+#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
+#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
+#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
+#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
+#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
+#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
+#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
+#define IGP01E1000_PHY_POLARITY_MASK 0x0078
+#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
+#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
+#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
+
+#define I82580_ADDR_REG 16
+#define I82580_CFG_REG 22
+#define I82580_CFG_ASSERT_CRS_ON_TX (1 << 15)
+#define I82580_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
+#define I82580_CTRL_REG 23
+#define I82580_CTRL_DOWNSHIFT_MASK (7 << 10)
+
+/* 82580 specific PHY registers */
+#define I82580_PHY_CTRL_2 18
+#define I82580_PHY_LBK_CTRL 19
+#define I82580_PHY_STATUS_2 26
+#define I82580_PHY_DIAG_STATUS 31
+
+/* I82580 PHY Status 2 */
+#define I82580_PHY_STATUS2_REV_POLARITY 0x0400
+#define I82580_PHY_STATUS2_MDIX 0x0800
+#define I82580_PHY_STATUS2_SPEED_MASK 0x0300
+#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
+#define I82580_PHY_STATUS2_SPEED_100MBPS 0x0100
+
+/* I82580 PHY Control 2 */
+#define I82580_PHY_CTRL2_AUTO_MDIX 0x0400
+#define I82580_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
+
+/* I82580 PHY Diagnostics Status */
+#define I82580_DSTATUS_CABLE_LENGTH 0x03FC
+#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
+/* Enable flexible speed on link-up */
+#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
+#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
+#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
+#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
+#define IGP01E1000_PSSR_MDIX 0x0800
+#define IGP01E1000_PSSR_SPEED_MASK 0xC000
+#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
+#define IGP02E1000_PHY_CHANNEL_NUM 4
+#define IGP02E1000_PHY_AGC_A 0x11B1
+#define IGP02E1000_PHY_AGC_B 0x12B1
+#define IGP02E1000_PHY_AGC_C 0x14B1
+#define IGP02E1000_PHY_AGC_D 0x18B1
+#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
+#define IGP02E1000_AGC_LENGTH_MASK 0x7F
+#define IGP02E1000_AGC_RANGE 15
+
+#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
+#define E1000_EERD 0x00014 /* EEPROM Read - RW */
+#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
+#define E1000_MDIC 0x00020 /* MDI Control - RW */
+#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
+#define E1000_SCTL 0x00024 /* SerDes Control - RW */
+#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
+#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
+#define E1000_FCT 0x00030 /* Flow Control Type - RW */
+#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
+#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
+#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
+#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
+#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
+#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
+#define E1000_RCTL 0x00100 /* RX Control - RW */
+#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
+#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+#define E1000_TCTL 0x00400 /* TX Control - RW */
+#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
+#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
+#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
+#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
+#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
+#define E1000_PBS 0x01008 /* Packet Buffer Size */
+#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
+#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
+#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
+#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
+#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
+#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
+#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
+
+/* IEEE 1588 TIMESYNCH */
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
+#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */
+#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */
+
+/* Filtering Registers */
+#define E1000_SAQF(_n) (0x5980 + 4 * (_n))
+#define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
+#define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
+#define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
+#define E1000_SAQF0 E1000_SAQF(0)
+#define E1000_DAQF0 E1000_DAQF(0)
+#define E1000_SPQF0 E1000_SPQF(0)
+#define E1000_FTQF0 E1000_FTQF(0)
+#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
+#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
+
+#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
+/* DMA Coalescing registers */
+#define E1000_DMACR 0x02508 /* Control Register */
+#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
+#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
+#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
+#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
+#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* TX Rate Limit Registers */
+#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
+#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
+
+/* Split and Replication RX Control - RW */
+#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
+ : (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
+ : (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
+ : (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
+ : (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
+ : (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
+ : (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
+ : (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
+ : (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
+ : (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
+ : (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
+ : (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
+ : (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
+ : (0x0E028 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
+ : (0x0E038 + ((_n) * 0x40)))
+#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
+ : (0x0E03C + ((_n) * 0x40)))
+#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
+#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
+#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
+#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
+#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
+#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
+#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
+#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
+#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
+#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
+#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
+#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
+#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
+#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
+#define E1000_COLC 0x04028 /* Collision Count - R/clr */
+#define E1000_DC 0x04030 /* Defer Count - R/clr */
+#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
+#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
+#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
+#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
+#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
+#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
+#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
+#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
+#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
+#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
+#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
+#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
+#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
+#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
+#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
+#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
+#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
+#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
+#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
+#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
+#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
+#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
+#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
+#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
+#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
+#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
+#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
+#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
+#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
+#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
+#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
+#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
+#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
+#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
+#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
+#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
+#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
+#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
+#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
+#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
+#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
+#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
+#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
+#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
+#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
+#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
+#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
+#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
+/* Interrupt Cause Rx Packet Timer Expire Count */
+#define E1000_ICRXPTC 0x04104
+/* Interrupt Cause Rx Absolute Timer Expire Count */
+#define E1000_ICRXATC 0x04108
+/* Interrupt Cause Tx Packet Timer Expire Count */
+#define E1000_ICTXPTC 0x0410C
+/* Interrupt Cause Tx Absolute Timer Expire Count */
+#define E1000_ICTXATC 0x04110
+/* Interrupt Cause Tx Queue Empty Count */
+#define E1000_ICTXQEC 0x04118
+/* Interrupt Cause Tx Queue Minimum Threshold Count */
+#define E1000_ICTXQMTC 0x0411C
+/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
+#define E1000_ICRXDMTC 0x04120
+#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
+#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
+#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
+#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
+#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
+#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
+#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
+#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
+#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
+#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
+#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
+#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
+#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
+#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
+#define E1000_LENERRS 0x04138 /* Length Errors Count */
+#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
+#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
+#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
+#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
+#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
+#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
+#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
+#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
+#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
+#define E1000_RA 0x05400 /* Receive Address - RW Array */
+#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
+#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
+#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
+#define E1000_WUC 0x05800 /* Wakeup Control - RW */
+#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
+#define E1000_WUS 0x05810 /* Wakeup Status - RO */
+#define E1000_MANC 0x05820 /* Management Control - RW */
+#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
+#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
+
+#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
+#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
+#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
+#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
+#define E1000_GCR 0x05B00 /* PCI-Ex Control */
+#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
+#define E1000_SWSM 0x05B50 /* SW Semaphore */
+#define E1000_FWSM 0x05B54 /* FW Semaphore */
+#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
+
+/* RSS registers */
+#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
+#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
+#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
+#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
+/* MSI-X Allocation Register (_i) - RW */
+#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
+/* Redirection Table - RW Array */
+#define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
+#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
+
+/* VT Registers */
+#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
+#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
+#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
+#define E1000_VFRE 0x00C8C /* VF Receive Enables */
+#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
+#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
+#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
+#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
+#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
+#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
+/* These act per VF so an array friendly macro is used */
+#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
+#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine
+ * Filter - RW */
+#define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
+
+#define wr32(reg, value) (writel(value, hw->hw_addr + reg))
+#define rd32(reg) (readl(hw->hw_addr + reg))
+#define wrfl() ((void)rd32(E1000_STATUS))
+
+#define array_wr32(reg, offset, value) \
+ (writel(value, hw->hw_addr + reg + ((offset) << 2)))
+#define array_rd32(reg, offset) \
+ (readl(hw->hw_addr + reg + ((offset) << 2)))
+
+/* DMA Coalescing registers */
+#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
+
+/* Energy Efficient Ethernet "EEE" register */
+#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
+#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
+
+/* Thermal Sensor Register */
+#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
+
+/* OS2BMC Registers */
+#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
+#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
+#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
+#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGB_H_
+#define _IGB_H_
+
+#include "e1000_mac.h"
+#include "e1000_82575.h"
+
+#include <linux/clocksource.h>
+#include <linux/timecompare.h>
+#include <linux/net_tstamp.h>
+#include <linux/bitops.h>
+#include <linux/if_vlan.h>
+
+struct igb_adapter;
+
+/* ((1000000000ns / (6000ints/s * 1024ns)) << 2 = 648 */
+#define IGB_START_ITR 648
+
+/* TX/RX descriptor defines */
+#define IGB_DEFAULT_TXD 256
+#define IGB_MIN_TXD 80
+#define IGB_MAX_TXD 4096
+
+#define IGB_DEFAULT_RXD 256
+#define IGB_MIN_RXD 80
+#define IGB_MAX_RXD 4096
+
+#define IGB_DEFAULT_ITR 3 /* dynamic */
+#define IGB_MAX_ITR_USECS 10000
+#define IGB_MIN_ITR_USECS 10
+#define NON_Q_VECTORS 1
+#define MAX_Q_VECTORS 8
+
+/* Transmit and receive queues */
+#define IGB_MAX_RX_QUEUES (adapter->vfs_allocated_count ? 2 : \
+ (hw->mac.type > e1000_82575 ? 8 : 4))
+#define IGB_ABS_MAX_TX_QUEUES 8
+#define IGB_MAX_TX_QUEUES IGB_MAX_RX_QUEUES
+
+#define IGB_MAX_VF_MC_ENTRIES 30
+#define IGB_MAX_VF_FUNCTIONS 8
+#define IGB_MAX_VFTA_ENTRIES 128
+
+struct vf_data_storage {
+ unsigned char vf_mac_addresses[ETH_ALEN];
+ u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
+ u16 num_vf_mc_hashes;
+ u16 vlans_enabled;
+ u32 flags;
+ unsigned long last_nack;
+ u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+ u16 pf_qos;
+ u16 tx_rate;
+};
+
+#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */
+#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGB_RX_PTHRESH 8
+#define IGB_RX_HTHRESH 8
+#define IGB_RX_WTHRESH 1
+#define IGB_TX_PTHRESH 8
+#define IGB_TX_HTHRESH 1
+#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \
+ adapter->msix_entries) ? 1 : 16)
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+/* Supported Rx Buffer Sizes */
+#define IGB_RXBUFFER_64 64 /* Used for packet split */
+#define IGB_RXBUFFER_128 128 /* Used for packet split */
+#define IGB_RXBUFFER_1024 1024
+#define IGB_RXBUFFER_2048 2048
+#define IGB_RXBUFFER_16384 16384
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGB_TX_QUEUE_WAKE 16
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGB_EEPROM_APME 0x0400
+
+#ifndef IGB_MASTER_SLAVE
+/* Switch to override PHY master/slave setting */
+#define IGB_MASTER_SLAVE e1000_ms_hw_default
+#endif
+
+#define IGB_MNG_VLAN_NONE -1
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct igb_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ union {
+ /* TX */
+ struct {
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ unsigned int bytecount;
+ u16 gso_segs;
+ u8 tx_flags;
+ u8 mapped_as_page;
+ };
+ /* RX */
+ struct {
+ struct page *page;
+ dma_addr_t page_dma;
+ u16 page_offset;
+ };
+ };
+};
+
+struct igb_tx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 restart_queue;
+ u64 restart_queue2;
+};
+
+struct igb_rx_queue_stats {
+ u64 packets;
+ u64 bytes;
+ u64 drops;
+ u64 csum_err;
+ u64 alloc_failed;
+};
+
+struct igb_q_vector {
+ struct igb_adapter *adapter; /* backlink */
+ struct igb_ring *rx_ring;
+ struct igb_ring *tx_ring;
+ struct napi_struct napi;
+
+ u32 eims_value;
+ u16 cpu;
+
+ u16 itr_val;
+ u8 set_itr;
+ void __iomem *itr_register;
+
+ char name[IFNAMSIZ + 9];
+};
+
+struct igb_ring {
+ struct igb_q_vector *q_vector; /* backlink to q_vector */
+ struct net_device *netdev; /* back pointer to net_device */
+ struct device *dev; /* device pointer for dma mapping */
+ dma_addr_t dma; /* phys address of the ring */
+ void *desc; /* descriptor ring memory */
+ unsigned int size; /* length of desc. ring in bytes */
+ u16 count; /* number of desc. in the ring */
+ u16 next_to_use;
+ u16 next_to_clean;
+ u8 queue_index;
+ u8 reg_idx;
+ void __iomem *head;
+ void __iomem *tail;
+ struct igb_buffer *buffer_info; /* array of buffer info structs */
+
+ unsigned int total_bytes;
+ unsigned int total_packets;
+
+ u32 flags;
+
+ union {
+ /* TX */
+ struct {
+ struct igb_tx_queue_stats tx_stats;
+ struct u64_stats_sync tx_syncp;
+ struct u64_stats_sync tx_syncp2;
+ bool detect_tx_hung;
+ };
+ /* RX */
+ struct {
+ struct igb_rx_queue_stats rx_stats;
+ struct u64_stats_sync rx_syncp;
+ u32 rx_buffer_len;
+ };
+ };
+};
+
+#define IGB_RING_FLAG_RX_CSUM 0x00000001 /* RX CSUM enabled */
+#define IGB_RING_FLAG_RX_SCTP_CSUM 0x00000002 /* SCTP CSUM offload enabled */
+
+#define IGB_RING_FLAG_TX_CTX_IDX 0x00000001 /* HW requires context index */
+
+#define IGB_ADVTXD_DCMD (E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS)
+
+#define E1000_RX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_rx_desc *)((R).desc))[i]))
+#define E1000_TX_DESC_ADV(R, i) \
+ (&(((union e1000_adv_tx_desc *)((R).desc))[i]))
+#define E1000_TX_CTXTDESC_ADV(R, i) \
+ (&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
+
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/* board specific private data structure */
+struct igb_adapter {
+ struct timer_list watchdog_timer;
+ struct timer_list phy_info_timer;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u16 mng_vlan_id;
+ u32 bd_number;
+ u32 wol;
+ u32 en_mng_pt;
+ u16 link_speed;
+ u16 link_duplex;
+
+ /* Interrupt Throttle Rate */
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+ bool fc_autoneg;
+ u8 tx_timeout_factor;
+ struct timer_list blink_timer;
+ unsigned long led_status;
+
+ /* TX */
+ struct igb_ring *tx_ring[16];
+ u32 tx_timeout_count;
+
+ /* RX */
+ struct igb_ring *rx_ring[16];
+ int num_tx_queues;
+ int num_rx_queues;
+
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct cyclecounter cycles;
+ struct timecounter clock;
+ struct timecompare compare;
+ struct hwtstamp_config hwtstamp_config;
+
+ spinlock_t stats64_lock;
+ struct rtnl_link_stats64 stats64;
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+ struct e1000_hw_stats stats;
+ struct e1000_phy_info phy_info;
+ struct e1000_phy_stats phy_stats;
+
+ u32 test_icr;
+ struct igb_ring test_tx_ring;
+ struct igb_ring test_rx_ring;
+
+ int msg_enable;
+
+ unsigned int num_q_vectors;
+ struct igb_q_vector *q_vector[MAX_Q_VECTORS];
+ struct msix_entry *msix_entries;
+ u32 eims_enable_mask;
+ u32 eims_other;
+
+ /* to not mess up cache alignment, always add to the bottom */
+ unsigned long state;
+ unsigned int flags;
+ u32 eeprom_wol;
+
+ struct igb_ring *multi_tx_table[IGB_ABS_MAX_TX_QUEUES];
+ u16 tx_ring_count;
+ u16 rx_ring_count;
+ unsigned int vfs_allocated_count;
+ struct vf_data_storage *vf_data;
+ int vf_rate_link_speed;
+ u32 rss_queues;
+ u32 wvbr;
+};
+
+#define IGB_FLAG_HAS_MSI (1 << 0)
+#define IGB_FLAG_DCA_ENABLED (1 << 1)
+#define IGB_FLAG_QUAD_PORT_A (1 << 2)
+#define IGB_FLAG_QUEUE_PAIRS (1 << 3)
+#define IGB_FLAG_DMAC (1 << 4)
+
+/* DMA Coalescing defines */
+#define IGB_MIN_TXPBSIZE 20408
+#define IGB_TX_BUF_4096 4096
+#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */
+
+#define IGB_82576_TSYNC_SHIFT 19
+#define IGB_82580_TSYNC_SHIFT 24
+#define IGB_TS_HDR_LEN 16
+enum e1000_state_t {
+ __IGB_TESTING,
+ __IGB_RESETTING,
+ __IGB_DOWN
+};
+
+enum igb_boards {
+ board_82575,
+};
+
+extern char igb_driver_name[];
+extern char igb_driver_version[];
+
+extern int igb_up(struct igb_adapter *);
+extern void igb_down(struct igb_adapter *);
+extern void igb_reinit_locked(struct igb_adapter *);
+extern void igb_reset(struct igb_adapter *);
+extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
+extern int igb_setup_tx_resources(struct igb_ring *);
+extern int igb_setup_rx_resources(struct igb_ring *);
+extern void igb_free_tx_resources(struct igb_ring *);
+extern void igb_free_rx_resources(struct igb_ring *);
+extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_setup_tctl(struct igb_adapter *);
+extern void igb_setup_rctl(struct igb_adapter *);
+extern netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *, struct igb_ring *);
+extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
+ struct igb_buffer *);
+extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
+extern void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
+extern bool igb_has_link(struct igb_adapter *adapter);
+extern void igb_set_ethtool_ops(struct net_device *);
+extern void igb_power_up_link(struct igb_adapter *);
+
+static inline s32 igb_reset_phy(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.reset)
+ return hw->phy.ops.reset(hw);
+
+ return 0;
+}
+
+static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+ if (hw->phy.ops.read_reg)
+ return hw->phy.ops.read_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
+{
+ if (hw->phy.ops.write_reg)
+ return hw->phy.ops.write_reg(hw, offset, data);
+
+ return 0;
+}
+
+static inline s32 igb_get_phy_info(struct e1000_hw *hw)
+{
+ if (hw->phy.ops.get_phy_info)
+ return hw->phy.ops.get_phy_info(hw);
+
+ return 0;
+}
+
+#endif /* _IGB_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for igb */
+
+#include <linux/vmalloc.h>
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/ethtool.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+#include "igb.h"
+
+struct igb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IGB_STAT(_name, _stat) { \
+ .stat_string = _name, \
+ .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
+ .stat_offset = offsetof(struct igb_adapter, _stat) \
+}
+static const struct igb_stats igb_gstrings_stats[] = {
+ IGB_STAT("rx_packets", stats.gprc),
+ IGB_STAT("tx_packets", stats.gptc),
+ IGB_STAT("rx_bytes", stats.gorc),
+ IGB_STAT("tx_bytes", stats.gotc),
+ IGB_STAT("rx_broadcast", stats.bprc),
+ IGB_STAT("tx_broadcast", stats.bptc),
+ IGB_STAT("rx_multicast", stats.mprc),
+ IGB_STAT("tx_multicast", stats.mptc),
+ IGB_STAT("multicast", stats.mprc),
+ IGB_STAT("collisions", stats.colc),
+ IGB_STAT("rx_crc_errors", stats.crcerrs),
+ IGB_STAT("rx_no_buffer_count", stats.rnbc),
+ IGB_STAT("rx_missed_errors", stats.mpc),
+ IGB_STAT("tx_aborted_errors", stats.ecol),
+ IGB_STAT("tx_carrier_errors", stats.tncrs),
+ IGB_STAT("tx_window_errors", stats.latecol),
+ IGB_STAT("tx_abort_late_coll", stats.latecol),
+ IGB_STAT("tx_deferred_ok", stats.dc),
+ IGB_STAT("tx_single_coll_ok", stats.scc),
+ IGB_STAT("tx_multi_coll_ok", stats.mcc),
+ IGB_STAT("tx_timeout_count", tx_timeout_count),
+ IGB_STAT("rx_long_length_errors", stats.roc),
+ IGB_STAT("rx_short_length_errors", stats.ruc),
+ IGB_STAT("rx_align_errors", stats.algnerrc),
+ IGB_STAT("tx_tcp_seg_good", stats.tsctc),
+ IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
+ IGB_STAT("rx_flow_control_xon", stats.xonrxc),
+ IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
+ IGB_STAT("tx_flow_control_xon", stats.xontxc),
+ IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
+ IGB_STAT("rx_long_byte_count", stats.gorc),
+ IGB_STAT("tx_dma_out_of_sync", stats.doosync),
+ IGB_STAT("tx_smbus", stats.mgptc),
+ IGB_STAT("rx_smbus", stats.mgprc),
+ IGB_STAT("dropped_smbus", stats.mgpdc),
+ IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
+ IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
+ IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
+ IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
+};
+
+#define IGB_NETDEV_STAT(_net_stat) { \
+ .stat_string = __stringify(_net_stat), \
+ .sizeof_stat = FIELD_SIZEOF(struct rtnl_link_stats64, _net_stat), \
+ .stat_offset = offsetof(struct rtnl_link_stats64, _net_stat) \
+}
+static const struct igb_stats igb_gstrings_net_stats[] = {
+ IGB_NETDEV_STAT(rx_errors),
+ IGB_NETDEV_STAT(tx_errors),
+ IGB_NETDEV_STAT(tx_dropped),
+ IGB_NETDEV_STAT(rx_length_errors),
+ IGB_NETDEV_STAT(rx_over_errors),
+ IGB_NETDEV_STAT(rx_frame_errors),
+ IGB_NETDEV_STAT(rx_fifo_errors),
+ IGB_NETDEV_STAT(tx_fifo_errors),
+ IGB_NETDEV_STAT(tx_heartbeat_errors)
+};
+
+#define IGB_GLOBAL_STATS_LEN \
+ (sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
+#define IGB_NETDEV_STATS_LEN \
+ (sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
+#define IGB_RX_QUEUE_STATS_LEN \
+ (sizeof(struct igb_rx_queue_stats) / sizeof(u64))
+
+#define IGB_TX_QUEUE_STATS_LEN 3 /* packets, bytes, restart_queue */
+
+#define IGB_QUEUE_STATS_LEN \
+ ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
+ IGB_RX_QUEUE_STATS_LEN) + \
+ (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
+ IGB_TX_QUEUE_STATS_LEN))
+#define IGB_STATS_LEN \
+ (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
+
+static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
+
+static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status;
+
+ if (hw->phy.media_type == e1000_media_type_copper) {
+
+ ecmd->supported = (SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full|
+ SUPPORTED_Autoneg |
+ SUPPORTED_TP);
+ ecmd->advertising = ADVERTISED_TP;
+
+ if (hw->mac.autoneg == 1) {
+ ecmd->advertising |= ADVERTISED_Autoneg;
+ /* the e1000 autoneg seems to match ethtool nicely */
+ ecmd->advertising |= hw->phy.autoneg_advertised;
+ }
+
+ ecmd->port = PORT_TP;
+ ecmd->phy_address = hw->phy.addr;
+ } else {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE |
+ SUPPORTED_Autoneg);
+
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE |
+ ADVERTISED_Autoneg);
+
+ ecmd->port = PORT_FIBRE;
+ }
+
+ ecmd->transceiver = XCVR_INTERNAL;
+
+ status = rd32(E1000_STATUS);
+
+ if (status & E1000_STATUS_LU) {
+
+ if ((status & E1000_STATUS_SPEED_1000) ||
+ hw->phy.media_type != e1000_media_type_copper)
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ else if (status & E1000_STATUS_SPEED_100)
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ else
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+
+ if ((status & E1000_STATUS_FD) ||
+ hw->phy.media_type != e1000_media_type_copper)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+ return 0;
+}
+
+static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* When SoL/IDER sessions are active, autoneg/speed/duplex
+ * cannot be changed */
+ if (igb_check_reset_block(hw)) {
+ dev_err(&adapter->pdev->dev, "Cannot change link "
+ "characteristics when SoL/IDER is active.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE) {
+ hw->mac.autoneg = 1;
+ hw->phy.autoneg_advertised = ecmd->advertising |
+ ADVERTISED_TP |
+ ADVERTISED_Autoneg;
+ ecmd->advertising = hw->phy.autoneg_advertised;
+ if (adapter->fc_autoneg)
+ hw->fc.requested_mode = e1000_fc_default;
+ } else {
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return -EINVAL;
+ }
+ }
+
+ /* reset the link */
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return 0;
+}
+
+static u32 igb_get_link(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ /*
+ * If the link is not reported up to netdev, interrupts are disabled,
+ * and so the physical link state may have changed since we last
+ * looked. Set get_link_status to make sure that the true link
+ * state is interrogated, rather than pulling a cached and possibly
+ * stale link state from the driver.
+ */
+ if (!netif_carrier_ok(netdev))
+ mac->get_link_status = 1;
+
+ return igb_has_link(adapter);
+}
+
+static void igb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ pause->autoneg =
+ (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
+
+ if (hw->fc.current_mode == e1000_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.current_mode == e1000_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int igb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 0;
+
+ adapter->fc_autoneg = pause->autoneg;
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (adapter->fc_autoneg == AUTONEG_ENABLE) {
+ hw->fc.requested_mode = e1000_fc_default;
+ if (netif_running(adapter->netdev)) {
+ igb_down(adapter);
+ igb_up(adapter);
+ } else {
+ igb_reset(adapter);
+ }
+ } else {
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.requested_mode = e1000_fc_none;
+
+ hw->fc.current_mode = hw->fc.requested_mode;
+
+ retval = ((hw->phy.media_type == e1000_media_type_copper) ?
+ igb_force_mac_fc(hw) : igb_setup_link(hw));
+ }
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return retval;
+}
+
+static u32 igb_get_msglevel(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igb_get_regs_len(struct net_device *netdev)
+{
+#define IGB_REGS_LEN 551
+ return IGB_REGS_LEN * sizeof(u32);
+}
+
+static void igb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 i;
+
+ memset(p, 0, IGB_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = rd32(E1000_CTRL);
+ regs_buff[1] = rd32(E1000_STATUS);
+ regs_buff[2] = rd32(E1000_CTRL_EXT);
+ regs_buff[3] = rd32(E1000_MDIC);
+ regs_buff[4] = rd32(E1000_SCTL);
+ regs_buff[5] = rd32(E1000_CONNSW);
+ regs_buff[6] = rd32(E1000_VET);
+ regs_buff[7] = rd32(E1000_LEDCTL);
+ regs_buff[8] = rd32(E1000_PBA);
+ regs_buff[9] = rd32(E1000_PBS);
+ regs_buff[10] = rd32(E1000_FRTIMER);
+ regs_buff[11] = rd32(E1000_TCPTIMER);
+
+ /* NVM Register */
+ regs_buff[12] = rd32(E1000_EECD);
+
+ /* Interrupt */
+ /* Reading EICS for EICR because they read the
+ * same but EICS does not clear on read */
+ regs_buff[13] = rd32(E1000_EICS);
+ regs_buff[14] = rd32(E1000_EICS);
+ regs_buff[15] = rd32(E1000_EIMS);
+ regs_buff[16] = rd32(E1000_EIMC);
+ regs_buff[17] = rd32(E1000_EIAC);
+ regs_buff[18] = rd32(E1000_EIAM);
+ /* Reading ICS for ICR because they read the
+ * same but ICS does not clear on read */
+ regs_buff[19] = rd32(E1000_ICS);
+ regs_buff[20] = rd32(E1000_ICS);
+ regs_buff[21] = rd32(E1000_IMS);
+ regs_buff[22] = rd32(E1000_IMC);
+ regs_buff[23] = rd32(E1000_IAC);
+ regs_buff[24] = rd32(E1000_IAM);
+ regs_buff[25] = rd32(E1000_IMIRVP);
+
+ /* Flow Control */
+ regs_buff[26] = rd32(E1000_FCAL);
+ regs_buff[27] = rd32(E1000_FCAH);
+ regs_buff[28] = rd32(E1000_FCTTV);
+ regs_buff[29] = rd32(E1000_FCRTL);
+ regs_buff[30] = rd32(E1000_FCRTH);
+ regs_buff[31] = rd32(E1000_FCRTV);
+
+ /* Receive */
+ regs_buff[32] = rd32(E1000_RCTL);
+ regs_buff[33] = rd32(E1000_RXCSUM);
+ regs_buff[34] = rd32(E1000_RLPML);
+ regs_buff[35] = rd32(E1000_RFCTL);
+ regs_buff[36] = rd32(E1000_MRQC);
+ regs_buff[37] = rd32(E1000_VT_CTL);
+
+ /* Transmit */
+ regs_buff[38] = rd32(E1000_TCTL);
+ regs_buff[39] = rd32(E1000_TCTL_EXT);
+ regs_buff[40] = rd32(E1000_TIPG);
+ regs_buff[41] = rd32(E1000_DTXCTL);
+
+ /* Wake Up */
+ regs_buff[42] = rd32(E1000_WUC);
+ regs_buff[43] = rd32(E1000_WUFC);
+ regs_buff[44] = rd32(E1000_WUS);
+ regs_buff[45] = rd32(E1000_IPAV);
+ regs_buff[46] = rd32(E1000_WUPL);
+
+ /* MAC */
+ regs_buff[47] = rd32(E1000_PCS_CFG0);
+ regs_buff[48] = rd32(E1000_PCS_LCTL);
+ regs_buff[49] = rd32(E1000_PCS_LSTAT);
+ regs_buff[50] = rd32(E1000_PCS_ANADV);
+ regs_buff[51] = rd32(E1000_PCS_LPAB);
+ regs_buff[52] = rd32(E1000_PCS_NPTX);
+ regs_buff[53] = rd32(E1000_PCS_LPABNP);
+
+ /* Statistics */
+ regs_buff[54] = adapter->stats.crcerrs;
+ regs_buff[55] = adapter->stats.algnerrc;
+ regs_buff[56] = adapter->stats.symerrs;
+ regs_buff[57] = adapter->stats.rxerrc;
+ regs_buff[58] = adapter->stats.mpc;
+ regs_buff[59] = adapter->stats.scc;
+ regs_buff[60] = adapter->stats.ecol;
+ regs_buff[61] = adapter->stats.mcc;
+ regs_buff[62] = adapter->stats.latecol;
+ regs_buff[63] = adapter->stats.colc;
+ regs_buff[64] = adapter->stats.dc;
+ regs_buff[65] = adapter->stats.tncrs;
+ regs_buff[66] = adapter->stats.sec;
+ regs_buff[67] = adapter->stats.htdpmc;
+ regs_buff[68] = adapter->stats.rlec;
+ regs_buff[69] = adapter->stats.xonrxc;
+ regs_buff[70] = adapter->stats.xontxc;
+ regs_buff[71] = adapter->stats.xoffrxc;
+ regs_buff[72] = adapter->stats.xofftxc;
+ regs_buff[73] = adapter->stats.fcruc;
+ regs_buff[74] = adapter->stats.prc64;
+ regs_buff[75] = adapter->stats.prc127;
+ regs_buff[76] = adapter->stats.prc255;
+ regs_buff[77] = adapter->stats.prc511;
+ regs_buff[78] = adapter->stats.prc1023;
+ regs_buff[79] = adapter->stats.prc1522;
+ regs_buff[80] = adapter->stats.gprc;
+ regs_buff[81] = adapter->stats.bprc;
+ regs_buff[82] = adapter->stats.mprc;
+ regs_buff[83] = adapter->stats.gptc;
+ regs_buff[84] = adapter->stats.gorc;
+ regs_buff[86] = adapter->stats.gotc;
+ regs_buff[88] = adapter->stats.rnbc;
+ regs_buff[89] = adapter->stats.ruc;
+ regs_buff[90] = adapter->stats.rfc;
+ regs_buff[91] = adapter->stats.roc;
+ regs_buff[92] = adapter->stats.rjc;
+ regs_buff[93] = adapter->stats.mgprc;
+ regs_buff[94] = adapter->stats.mgpdc;
+ regs_buff[95] = adapter->stats.mgptc;
+ regs_buff[96] = adapter->stats.tor;
+ regs_buff[98] = adapter->stats.tot;
+ regs_buff[100] = adapter->stats.tpr;
+ regs_buff[101] = adapter->stats.tpt;
+ regs_buff[102] = adapter->stats.ptc64;
+ regs_buff[103] = adapter->stats.ptc127;
+ regs_buff[104] = adapter->stats.ptc255;
+ regs_buff[105] = adapter->stats.ptc511;
+ regs_buff[106] = adapter->stats.ptc1023;
+ regs_buff[107] = adapter->stats.ptc1522;
+ regs_buff[108] = adapter->stats.mptc;
+ regs_buff[109] = adapter->stats.bptc;
+ regs_buff[110] = adapter->stats.tsctc;
+ regs_buff[111] = adapter->stats.iac;
+ regs_buff[112] = adapter->stats.rpthc;
+ regs_buff[113] = adapter->stats.hgptc;
+ regs_buff[114] = adapter->stats.hgorc;
+ regs_buff[116] = adapter->stats.hgotc;
+ regs_buff[118] = adapter->stats.lenerrs;
+ regs_buff[119] = adapter->stats.scvpc;
+ regs_buff[120] = adapter->stats.hrmpc;
+
+ for (i = 0; i < 4; i++)
+ regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[129 + i] = rd32(E1000_RDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[133 + i] = rd32(E1000_RDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[137 + i] = rd32(E1000_RDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[141 + i] = rd32(E1000_RDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[145 + i] = rd32(E1000_RDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
+
+ for (i = 0; i < 10; i++)
+ regs_buff[153 + i] = rd32(E1000_EITR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[163 + i] = rd32(E1000_IMIR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[179 + i] = rd32(E1000_RAL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[195 + i] = rd32(E1000_RAH(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[211 + i] = rd32(E1000_TDBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[215 + i] = rd32(E1000_TDBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[219 + i] = rd32(E1000_TDLEN(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[223 + i] = rd32(E1000_TDH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[227 + i] = rd32(E1000_TDT(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
+
+ for (i = 0; i < 4; i++)
+ regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
+ for (i = 0; i < 128; i++)
+ regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
+ for (i = 0; i < 4; i++)
+ regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
+
+ regs_buff[547] = rd32(E1000_TDFH);
+ regs_buff[548] = rd32(E1000_TDFT);
+ regs_buff[549] = rd32(E1000_TDFHS);
+ regs_buff[550] = rd32(E1000_TDFPC);
+ regs_buff[551] = adapter->stats.o2bgptc;
+ regs_buff[552] = adapter->stats.b2ospc;
+ regs_buff[553] = adapter->stats.o2bspc;
+ regs_buff[554] = adapter->stats.b2ogprc;
+}
+
+static int igb_get_eeprom_len(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.nvm.word_size * 2;
+}
+
+static int igb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ if (hw->nvm.type == e1000_nvm_eeprom_spi)
+ ret_val = hw->nvm.ops.read(hw, first_word,
+ last_word - first_word + 1,
+ eeprom_buff);
+ else {
+ for (i = 0; i < last_word - first_word + 1; i++) {
+ ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
+ &eeprom_buff[i]);
+ if (ret_val)
+ break;
+ }
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
+ eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static int igb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word, ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EOPNOTSUPP;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = hw->nvm.word_size * 2;
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ ret_val = hw->nvm.ops.read(hw, first_word, 1,
+ &eeprom_buff[0]);
+ ptr++;
+ }
+ if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ ret_val = hw->nvm.ops.read(hw, last_word, 1,
+ &eeprom_buff[last_word - first_word]);
+ }
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < last_word - first_word + 1; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(ptr, bytes, eeprom->len);
+
+ for (i = 0; i < last_word - first_word + 1; i++)
+ eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
+
+ ret_val = hw->nvm.ops.write(hw, first_word,
+ last_word - first_word + 1, eeprom_buff);
+
+ /* Update the checksum over the first part of the EEPROM if needed
+ * and flush shadow RAM for 82573 controllers */
+ if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG)))
+ hw->nvm.ops.update(hw);
+
+ kfree(eeprom_buff);
+ return ret_val;
+}
+
+static void igb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+ u16 eeprom_data;
+
+ strncpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver) - 1);
+ strncpy(drvinfo->version, igb_driver_version,
+ sizeof(drvinfo->version) - 1);
+
+ /* EEPROM image version # is reported as firmware version # for
+ * 82575 controllers */
+ adapter->hw.nvm.ops.read(&adapter->hw, 5, 1, &eeprom_data);
+ sprintf(firmware_version, "%d.%d-%d",
+ (eeprom_data & 0xF000) >> 12,
+ (eeprom_data & 0x0FF0) >> 4,
+ eeprom_data & 0x000F);
+
+ strncpy(drvinfo->fw_version, firmware_version,
+ sizeof(drvinfo->fw_version) - 1);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info) - 1);
+ drvinfo->n_stats = IGB_STATS_LEN;
+ drvinfo->testinfo_len = IGB_TEST_LEN;
+ drvinfo->regdump_len = igb_get_regs_len(netdev);
+ drvinfo->eedump_len = igb_get_eeprom_len(netdev);
+}
+
+static void igb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ ring->rx_max_pending = IGB_MAX_RXD;
+ ring->tx_max_pending = IGB_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = adapter->rx_ring_count;
+ ring->tx_pending = adapter->tx_ring_count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int igb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *temp_ring;
+ int i, err = 0;
+ u16 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
+ new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
+ new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring_count) &&
+ (new_rx_count == adapter->rx_ring_count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
+ if (adapter->num_tx_queues > adapter->num_rx_queues)
+ temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
+ else
+ temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
+
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igb_down(adapter);
+
+ /*
+ * We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the tx and rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring_count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->tx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_tx_count;
+ err = igb_setup_tx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_tx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+ }
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ igb_free_tx_resources(adapter->tx_ring[i]);
+
+ memcpy(adapter->tx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->tx_ring_count = new_tx_count;
+ }
+
+ if (new_rx_count != adapter->rx_ring_count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ memcpy(&temp_ring[i], adapter->rx_ring[i],
+ sizeof(struct igb_ring));
+
+ temp_ring[i].count = new_rx_count;
+ err = igb_setup_rx_resources(&temp_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ igb_free_rx_resources(&temp_ring[i]);
+ }
+ goto err_setup;
+ }
+
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ igb_free_rx_resources(adapter->rx_ring[i]);
+
+ memcpy(adapter->rx_ring[i], &temp_ring[i],
+ sizeof(struct igb_ring));
+ }
+
+ adapter->rx_ring_count = new_rx_count;
+ }
+err_setup:
+ igb_up(adapter);
+ vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGB_RESETTING, &adapter->state);
+ return err;
+}
+
+/* ethtool register test data */
+struct igb_reg_test {
+ u16 reg;
+ u16 reg_offset;
+ u16 array_len;
+ u16 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x100 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* i350 reg test */
+static struct igb_reg_test reg_test_i350[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* RDH is read-only for i350, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 16, TABLE64_TEST_HI,
+ 0xC3FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82580 reg test */
+static struct igb_reg_test reg_test_82580[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* RDH is read-only for 82580, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI,
+ 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST,
+ 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82576 reg test */
+static struct igb_reg_test reg_test_82576[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ /* Enable all RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82576, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128,TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* 82575 register test */
+static struct igb_reg_test reg_test_82575[] = {
+ { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
+ { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* Enable all four RX queues before testing. */
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
+ /* RDH is read-only for 82575, only test RDT. */
+ { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
+ { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
+ { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
+ { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
+ { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
+ { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
+ { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
+ { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pat, val;
+ static const u32 _test[] =
+ {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+ for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
+ wr32(reg, (_test[pat] & write));
+ val = rd32(reg) & mask;
+ if (val != (_test[pat] & write & mask)) {
+ dev_err(&adapter->pdev->dev, "pattern test reg %04X "
+ "failed: got 0x%08X expected 0x%08X\n",
+ reg, val, (_test[pat] & write & mask));
+ *data = reg;
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
+ int reg, u32 mask, u32 write)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 val;
+ wr32(reg, write & mask);
+ val = rd32(reg);
+ if ((write & mask) != (val & mask)) {
+ dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:"
+ " got 0x%08X expected 0x%08X\n", reg,
+ (val & mask), (write & mask));
+ *data = reg;
+ return 1;
+ }
+
+ return 0;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0)
+
+static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_test *test;
+ u32 value, before, after;
+ u32 i, toggle;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_i350:
+ test = reg_test_i350;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82580:
+ test = reg_test_82580;
+ toggle = 0x7FEFF3FF;
+ break;
+ case e1000_82576:
+ test = reg_test_82576;
+ toggle = 0x7FFFF3FF;
+ break;
+ default:
+ test = reg_test_82575;
+ toggle = 0x7FFFF3FF;
+ break;
+ }
+
+ /* Because the status register is such a special case,
+ * we handle it separately from the rest of the register
+ * tests. Some bits are read-only, some toggle, and some
+ * are writable on newer MACs.
+ */
+ before = rd32(E1000_STATUS);
+ value = (rd32(E1000_STATUS) & toggle);
+ wr32(E1000_STATUS, toggle);
+ after = rd32(E1000_STATUS) & toggle;
+ if (value != after) {
+ dev_err(&adapter->pdev->dev, "failed STATUS register test "
+ "got: 0x%08X expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ wr32(E1000_STATUS, before);
+
+ /* Perform the remainder of the register test, looping through
+ * the test table until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg +
+ (i * test->reg_offset),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * test->reg_offset));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return 0;
+}
+
+static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
+{
+ u16 temp;
+ u16 checksum = 0;
+ u16 i;
+
+ *data = 0;
+ /* Read and add up the contents of the EEPROM */
+ for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
+ if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
+ *data = 1;
+ break;
+ }
+ checksum += temp;
+ }
+
+ /* If Checksum is not Correct return error else test passed */
+ if ((checksum != (u16) NVM_SUM) && !(*data))
+ *data = 2;
+
+ return *data;
+}
+
+static irqreturn_t igb_test_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->test_icr |= rd32(E1000_ICR);
+
+ return IRQ_HANDLED;
+}
+
+static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, ics_mask, i = 0, shared_int = true;
+ u32 irq = adapter->pdev->irq;
+
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+ if (adapter->msix_entries) {
+ if (request_irq(adapter->msix_entries[0].vector,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ shared_int = false;
+ if (request_irq(irq,
+ igb_test_intr, 0, netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, adapter)) {
+ shared_int = false;
+ } else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
+ netdev->name, adapter)) {
+ *data = 1;
+ return -1;
+ }
+ dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
+ (shared_int ? "shared" : "unshared"));
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ msleep(10);
+
+ /* Define all writable bits for ICS */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ ics_mask = 0x37F47EDD;
+ break;
+ case e1000_82576:
+ ics_mask = 0x77D4FBFD;
+ break;
+ case e1000_82580:
+ ics_mask = 0x77DCFED5;
+ break;
+ case e1000_i350:
+ ics_mask = 0x77DCFED5;
+ break;
+ default:
+ ics_mask = 0x7FFFFFFF;
+ break;
+ }
+
+ /* Test each interrupt */
+ for (; i < 31; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!(mask & ics_mask))
+ continue;
+
+ if (!shared_int) {
+ /* Disable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /* Enable the interrupt to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was not posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMS, mask);
+ wr32(E1000_ICS, mask);
+ wrfl();
+ msleep(10);
+
+ if (!(adapter->test_icr & mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /* Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+
+ /* Flush any pending interrupts */
+ wr32(E1000_ICR, ~0);
+
+ wr32(E1000_IMC, ~mask);
+ wr32(E1000_ICS, ~mask);
+ wrfl();
+ msleep(10);
+
+ if (adapter->test_icr & mask) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ msleep(10);
+
+ /* Unhook test interrupt handler */
+ if (adapter->msix_entries)
+ free_irq(adapter->msix_entries[0].vector, adapter);
+ else
+ free_irq(irq, adapter);
+
+ return *data;
+}
+
+static void igb_free_desc_rings(struct igb_adapter *adapter)
+{
+ igb_free_tx_resources(&adapter->test_tx_ring);
+ igb_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int igb_setup_desc_rings(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ int ret_val;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+ tx_ring->count = IGB_DEFAULT_TXD;
+ tx_ring->dev = &adapter->pdev->dev;
+ tx_ring->netdev = adapter->netdev;
+ tx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_tx_resources(tx_ring)) {
+ ret_val = 1;
+ goto err_nomem;
+ }
+
+ igb_setup_tctl(adapter);
+ igb_configure_tx_ring(adapter, tx_ring);
+
+ /* Setup Rx descriptor ring and Rx buffers */
+ rx_ring->count = IGB_DEFAULT_RXD;
+ rx_ring->dev = &adapter->pdev->dev;
+ rx_ring->netdev = adapter->netdev;
+ rx_ring->rx_buffer_len = IGB_RXBUFFER_2048;
+ rx_ring->reg_idx = adapter->vfs_allocated_count;
+
+ if (igb_setup_rx_resources(rx_ring)) {
+ ret_val = 3;
+ goto err_nomem;
+ }
+
+ /* set the default queue to queue 0 of PF */
+ wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
+
+ /* enable receive ring */
+ igb_setup_rctl(adapter);
+ igb_configure_rx_ring(adapter, rx_ring);
+
+ igb_alloc_rx_buffers_adv(rx_ring, igb_desc_unused(rx_ring));
+
+ return 0;
+
+err_nomem:
+ igb_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static void igb_phy_disable_receiver(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Write out to PHY registers 29 and 30 to disable the Receiver. */
+ igb_write_phy_reg(hw, 29, 0x001F);
+ igb_write_phy_reg(hw, 30, 0x8FFC);
+ igb_write_phy_reg(hw, 29, 0x001A);
+ igb_write_phy_reg(hw, 30, 0x8FF0);
+}
+
+static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_reg = 0;
+
+ hw->mac.autoneg = false;
+
+ if (hw->phy.type == e1000_phy_m88) {
+ /* Auto-MDI/MDIX Off */
+ igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
+ /* reset to update Auto-MDI/MDIX */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
+ /* autoneg off */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
+ } else if (hw->phy.type == e1000_phy_82580) {
+ /* enable MII loopback */
+ igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
+ }
+
+ ctrl_reg = rd32(E1000_CTRL);
+
+ /* force 1000, set loopback */
+ igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
+
+ /* Now set up the MAC to the same speed/duplex as the PHY. */
+ ctrl_reg = rd32(E1000_CTRL);
+ ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
+ ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
+ E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
+ E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
+ E1000_CTRL_FD | /* Force Duplex to FULL */
+ E1000_CTRL_SLU); /* Set link up enable bit */
+
+ if (hw->phy.type == e1000_phy_m88)
+ ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
+
+ wr32(E1000_CTRL, ctrl_reg);
+
+ /* Disable the receiver on the PHY so when a cable is plugged in, the
+ * PHY does not begin to autoneg when a cable is reconnected to the NIC.
+ */
+ if (hw->phy.type == e1000_phy_m88)
+ igb_phy_disable_receiver(adapter);
+
+ udelay(500);
+
+ return 0;
+}
+
+static int igb_set_phy_loopback(struct igb_adapter *adapter)
+{
+ return igb_integrated_phy_loopback(adapter);
+}
+
+static int igb_setup_loopback_test(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ reg = rd32(E1000_CTRL_EXT);
+
+ /* use CTRL_EXT to identify link type as SGMII can appear as copper */
+ if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+
+ /* Enable DH89xxCC MPHY for near end loopback */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ reg = rd32(E1000_RCTL);
+ reg |= E1000_RCTL_LBM_TCVR;
+ wr32(E1000_RCTL, reg);
+
+ wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK);
+
+ reg = rd32(E1000_CTRL);
+ reg &= ~(E1000_CTRL_RFCE |
+ E1000_CTRL_TFCE |
+ E1000_CTRL_LRST);
+ reg |= E1000_CTRL_SLU |
+ E1000_CTRL_FD;
+ wr32(E1000_CTRL, reg);
+
+ /* Unset switch control to serdes energy detect */
+ reg = rd32(E1000_CONNSW);
+ reg &= ~E1000_CONNSW_ENRGSRC;
+ wr32(E1000_CONNSW, reg);
+
+ /* Set PCS register for forced speed */
+ reg = rd32(E1000_PCS_LCTL);
+ reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/
+ reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
+ E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
+ E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
+ E1000_PCS_LCTL_FSD | /* Force Speed */
+ E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
+ wr32(E1000_PCS_LCTL, reg);
+
+ return 0;
+ }
+
+ return igb_set_phy_loopback(adapter);
+}
+
+static void igb_loopback_cleanup(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+ u16 phy_reg;
+
+ if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
+ (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
+ u32 reg;
+
+ /* Disable near end loopback on DH89xxCC */
+ reg = rd32(E1000_MPHY_ADDR_CTL);
+ reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
+ E1000_MPHY_PCS_CLK_REG_OFFSET;
+ wr32(E1000_MPHY_ADDR_CTL, reg);
+
+ reg = rd32(E1000_MPHY_DATA);
+ reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
+ wr32(E1000_MPHY_DATA, reg);
+ }
+
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+ wr32(E1000_RCTL, rctl);
+
+ hw->mac.autoneg = true;
+ igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
+ if (phy_reg & MII_CR_LOOPBACK) {
+ phy_reg &= ~MII_CR_LOOPBACK;
+ igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
+ igb_phy_sw_reset(hw);
+ }
+}
+
+static void igb_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size /= 2;
+ memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+ memset(&skb->data[frame_size + 10], 0xBE, 1);
+ memset(&skb->data[frame_size + 12], 0xAF, 1);
+}
+
+static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
+{
+ frame_size /= 2;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size + 10) == 0xBE) &&
+ (*(skb->data + frame_size + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+ struct igb_ring *tx_ring,
+ unsigned int size)
+{
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_buffer *buffer_info;
+ int rx_ntc, tx_ntc, count = 0;
+ u32 staterr;
+
+ /* initialize next to clean and descriptor values */
+ rx_ntc = rx_ring->next_to_clean;
+ tx_ntc = tx_ring->next_to_clean;
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ /* check rx buffer */
+ buffer_info = &rx_ring->buffer_info[rx_ntc];
+
+ /* unmap rx buffer, will be remapped by alloc_rx_buffers */
+ dma_unmap_single(rx_ring->dev,
+ buffer_info->dma,
+ rx_ring->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ /* verify contents of skb */
+ if (!igb_check_lbtest_frame(buffer_info->skb, size))
+ count++;
+
+ /* unmap buffer on tx side */
+ buffer_info = &tx_ring->buffer_info[tx_ntc];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+
+ /* increment rx/tx next to clean counters */
+ rx_ntc++;
+ if (rx_ntc == rx_ring->count)
+ rx_ntc = 0;
+ tx_ntc++;
+ if (tx_ntc == tx_ring->count)
+ tx_ntc = 0;
+
+ /* fetch next descriptor */
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ /* re-map buffers to ring, store next to clean values */
+ igb_alloc_rx_buffers_adv(rx_ring, count);
+ rx_ring->next_to_clean = rx_ntc;
+ tx_ring->next_to_clean = tx_ntc;
+
+ return count;
+}
+
+static int igb_run_loopback_test(struct igb_adapter *adapter)
+{
+ struct igb_ring *tx_ring = &adapter->test_tx_ring;
+ struct igb_ring *rx_ring = &adapter->test_rx_ring;
+ int i, j, lc, good_cnt, ret_val = 0;
+ unsigned int size = 1024;
+ netdev_tx_t tx_ret_val;
+ struct sk_buff *skb;
+
+ /* allocate test skb */
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb)
+ return 11;
+
+ /* place data into test skb */
+ igb_create_lbtest_frame(skb, size);
+ skb_put(skb, size);
+
+ /*
+ * Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ for (j = 0; j <= lc; j++) { /* loop count loop */
+ /* reset count of good packets */
+ good_cnt = 0;
+
+ /* place 64 packets on the transmit queue*/
+ for (i = 0; i < 64; i++) {
+ skb_get(skb);
+ tx_ret_val = igb_xmit_frame_ring_adv(skb, tx_ring);
+ if (tx_ret_val == NETDEV_TX_OK)
+ good_cnt++;
+ }
+
+ if (good_cnt != 64) {
+ ret_val = 12;
+ break;
+ }
+
+ /* allow 200 milliseconds for packets to go from tx to rx */
+ msleep(200);
+
+ good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+ if (good_cnt != 64) {
+ ret_val = 13;
+ break;
+ }
+ } /* end loop count loop */
+
+ /* free the original skb */
+ kfree_skb(skb);
+
+ return ret_val;
+}
+
+static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
+{
+ /* PHY loopback cannot be performed if SoL/IDER
+ * sessions are active */
+ if (igb_check_reset_block(&adapter->hw)) {
+ dev_err(&adapter->pdev->dev,
+ "Cannot do PHY loopback test "
+ "when SoL/IDER is active.\n");
+ *data = 0;
+ goto out;
+ }
+ *data = igb_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = igb_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = igb_run_loopback_test(adapter);
+ igb_loopback_cleanup(adapter);
+
+err_loopback:
+ igb_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static int igb_link_test(struct igb_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+ if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+ int i = 0;
+ hw->mac.serdes_has_link = false;
+
+ /* On some blade server designs, link establishment
+ * could take as long as 2-3 minutes */
+ do {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.serdes_has_link)
+ return *data;
+ msleep(20);
+ } while (i++ < 3750);
+
+ *data = 1;
+ } else {
+ hw->mac.ops.check_for_link(&adapter->hw);
+ if (hw->mac.autoneg)
+ msleep(4000);
+
+ if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
+ *data = 1;
+ }
+ return *data;
+}
+
+static void igb_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u16 autoneg_advertised;
+ u8 forced_speed_duplex, autoneg;
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IGB_TESTING, &adapter->state);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ /* save speed, duplex, autoneg settings */
+ autoneg_advertised = adapter->hw.phy.autoneg_advertised;
+ forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
+ autoneg = adapter->hw.mac.autoneg;
+
+ dev_info(&adapter->pdev->dev, "offline testing starting\n");
+
+ /* power up link for link test */
+ igb_power_up_link(adapter);
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ igb_reset(adapter);
+
+ if (igb_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ if (igb_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ igb_reset(adapter);
+ /* power up link for loopback test */
+ igb_power_up_link(adapter);
+ if (igb_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* restore speed, duplex, autoneg settings */
+ adapter->hw.phy.autoneg_advertised = autoneg_advertised;
+ adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
+ adapter->hw.mac.autoneg = autoneg;
+
+ /* force this routine to wait until autoneg complete/timeout */
+ adapter->hw.phy.autoneg_wait_to_complete = true;
+ igb_reset(adapter);
+ adapter->hw.phy.autoneg_wait_to_complete = false;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ dev_info(&adapter->pdev->dev, "online testing starting\n");
+
+ /* PHY is powered down when interface is down */
+ if (if_running && igb_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ else
+ data[4] = 0;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__IGB_TESTING, &adapter->state);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int igb_wol_exclusion(struct igb_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int retval = 1; /* fail by default */
+
+ switch (hw->device_id) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ /* WoL not supported */
+ wol->supported = 0;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ /* Wake events not supported on port B */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ /* quad port adapters only support WoL on port A */
+ if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
+ wol->supported = 0;
+ break;
+ }
+ /* return success for non excluded adapter ports */
+ retval = 0;
+ break;
+ default:
+ /* dual port cards only support WoL on port A from now on
+ * unless it was enabled in the eeprom for port B
+ * so exclude FUNC_1 ports from having WoL enabled */
+ if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) &&
+ !adapter->eeprom_wol) {
+ wol->supported = 0;
+ break;
+ }
+
+ retval = 0;
+ }
+
+ return retval;
+}
+
+static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC |
+ WAKE_PHY;
+ wol->wolopts = 0;
+
+ /* this function will set ->supported = 0 and return 1 if wol is not
+ * supported by this hardware */
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ /* apply any specific unsupported masks here */
+ switch (adapter->hw.device_id) {
+ default:
+ break;
+ }
+
+ if (adapter->wol & E1000_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & E1000_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & E1000_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & E1000_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+ if (adapter->wol & E1000_WUFC_LNKC)
+ wol->wolopts |= WAKE_PHY;
+}
+
+static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (igb_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ /* these settings will always override what we currently have */
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= E1000_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= E1000_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= E1000_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= E1000_WUFC_MAG;
+ if (wol->wolopts & WAKE_PHY)
+ adapter->wol |= E1000_WUFC_LNKC;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+/* bit defines for adapter->led_status */
+#define IGB_LED_ON 0
+
+static int igb_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ igb_blink_led(hw);
+ return 2;
+ case ETHTOOL_ID_ON:
+ igb_blink_led(hw);
+ break;
+ case ETHTOOL_ID_OFF:
+ igb_led_off(hw);
+ break;
+ case ETHTOOL_ID_INACTIVE:
+ igb_led_off(hw);
+ clear_bit(IGB_LED_ON, &adapter->led_status);
+ igb_cleanup_led(hw);
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+ ((ec->tx_coalesce_usecs > 3) &&
+ (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+ (ec->tx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+ return -EINVAL;
+
+ /* If ITR is disabled, disable DMAC */
+ if (ec->rx_coalesce_usecs == 0) {
+ if (adapter->flags & IGB_FLAG_DMAC)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ }
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+ else
+ adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+ /* convert to rate of irq's per second */
+ if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+ adapter->tx_itr_setting = adapter->rx_itr_setting;
+ else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+ else
+ adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ if (q_vector->rx_ring)
+ q_vector->itr_val = adapter->rx_itr_setting;
+ else
+ q_vector->itr_val = adapter->tx_itr_setting;
+ if (q_vector->itr_val && q_vector->itr_val <= 3)
+ q_vector->itr_val = IGB_START_ITR;
+ q_vector->set_itr = 1;
+ }
+
+ return 0;
+}
+
+static int igb_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->rx_itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting;
+ else
+ ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+ if (adapter->tx_itr_setting <= 3)
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+ else
+ ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+ }
+
+ return 0;
+}
+
+static int igb_nway_reset(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igb_reinit_locked(adapter);
+ return 0;
+}
+
+static int igb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IGB_STATS_LEN;
+ case ETH_SS_TEST:
+ return IGB_TEST_LEN;
+ default:
+ return -ENOTSUPP;
+ }
+}
+
+static void igb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct rtnl_link_stats64 *net_stats = &adapter->stats64;
+ unsigned int start;
+ struct igb_ring *ring;
+ int i, j;
+ char *p;
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, net_stats);
+
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
+ data[i] = (igb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
+ p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
+ data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < adapter->num_tx_queues; j++) {
+ u64 restart2;
+
+ ring = adapter->tx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+ data[i] = ring->tx_stats.packets;
+ data[i+1] = ring->tx_stats.bytes;
+ data[i+2] = ring->tx_stats.restart_queue;
+ } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->tx_syncp2);
+ restart2 = ring->tx_stats.restart_queue2;
+ } while (u64_stats_fetch_retry_bh(&ring->tx_syncp2, start));
+ data[i+2] += restart2;
+
+ i += IGB_TX_QUEUE_STATS_LEN;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ ring = adapter->rx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+ data[i] = ring->rx_stats.packets;
+ data[i+1] = ring->rx_stats.bytes;
+ data[i+2] = ring->rx_stats.drops;
+ data[i+3] = ring->rx_stats.csum_err;
+ data[i+4] = ring->rx_stats.alloc_failed;
+ } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+ i += IGB_RX_QUEUE_STATS_LEN;
+ }
+ spin_unlock(&adapter->stats64_lock);
+}
+
+static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igb_gstrings_test,
+ IGB_TEST_LEN*ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
+ memcpy(p, igb_gstrings_net_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_restart", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_drops", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_csum_err", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_alloc_failed", i);
+ p += ETH_GSTRING_LEN;
+ }
+/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static const struct ethtool_ops igb_ethtool_ops = {
+ .get_settings = igb_get_settings,
+ .set_settings = igb_set_settings,
+ .get_drvinfo = igb_get_drvinfo,
+ .get_regs_len = igb_get_regs_len,
+ .get_regs = igb_get_regs,
+ .get_wol = igb_get_wol,
+ .set_wol = igb_set_wol,
+ .get_msglevel = igb_get_msglevel,
+ .set_msglevel = igb_set_msglevel,
+ .nway_reset = igb_nway_reset,
+ .get_link = igb_get_link,
+ .get_eeprom_len = igb_get_eeprom_len,
+ .get_eeprom = igb_get_eeprom,
+ .set_eeprom = igb_set_eeprom,
+ .get_ringparam = igb_get_ringparam,
+ .set_ringparam = igb_set_ringparam,
+ .get_pauseparam = igb_get_pauseparam,
+ .set_pauseparam = igb_set_pauseparam,
+ .self_test = igb_diag_test,
+ .get_strings = igb_get_strings,
+ .set_phys_id = igb_set_phys_id,
+ .get_sset_count = igb_get_sset_count,
+ .get_ethtool_stats = igb_get_ethtool_stats,
+ .get_coalesce = igb_get_coalesce,
+ .set_coalesce = igb_set_coalesce,
+};
+
+void igb_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) Gigabit Ethernet Linux driver
+ Copyright(c) 2007-2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/netdevice.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/net_tstamp.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/aer.h>
+#include <linux/prefetch.h>
+#ifdef CONFIG_IGB_DCA
+#include <linux/dca.h>
+#endif
+#include "igb.h"
+
+#define MAJ 3
+#define MIN 0
+#define BUILD 6
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+__stringify(BUILD) "-k"
+char igb_driver_name[] = "igb";
+char igb_driver_version[] = DRV_VERSION;
+static const char igb_driver_string[] =
+ "Intel(R) Gigabit Ethernet Network Driver";
+static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel Corporation.";
+
+static const struct e1000_info *igb_info_tbl[] = {
+ [board_82575] = &e1000_82575_info,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
+ /* required last entry */
+ {0, }
+};
+
+MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
+
+void igb_reset(struct igb_adapter *);
+static int igb_setup_all_tx_resources(struct igb_adapter *);
+static int igb_setup_all_rx_resources(struct igb_adapter *);
+static void igb_free_all_tx_resources(struct igb_adapter *);
+static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
+static int igb_probe(struct pci_dev *, const struct pci_device_id *);
+static void __devexit igb_remove(struct pci_dev *pdev);
+static void igb_init_hw_timer(struct igb_adapter *adapter);
+static int igb_sw_init(struct igb_adapter *);
+static int igb_open(struct net_device *);
+static int igb_close(struct net_device *);
+static void igb_configure_tx(struct igb_adapter *);
+static void igb_configure_rx(struct igb_adapter *);
+static void igb_clean_all_tx_rings(struct igb_adapter *);
+static void igb_clean_all_rx_rings(struct igb_adapter *);
+static void igb_clean_tx_ring(struct igb_ring *);
+static void igb_clean_rx_ring(struct igb_ring *);
+static void igb_set_rx_mode(struct net_device *);
+static void igb_update_phy_info(unsigned long);
+static void igb_watchdog(unsigned long);
+static void igb_watchdog_task(struct work_struct *);
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
+ struct rtnl_link_stats64 *stats);
+static int igb_change_mtu(struct net_device *, int);
+static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
+static irqreturn_t igb_intr(int irq, void *);
+static irqreturn_t igb_intr_msi(int irq, void *);
+static irqreturn_t igb_msix_other(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *);
+static void igb_setup_dca(struct igb_adapter *);
+#endif /* CONFIG_IGB_DCA */
+static bool igb_clean_tx_irq(struct igb_q_vector *);
+static int igb_poll(struct napi_struct *, int);
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *, int *, int);
+static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
+static void igb_tx_timeout(struct net_device *);
+static void igb_reset_task(struct work_struct *);
+static void igb_vlan_mode(struct net_device *netdev, u32 features);
+static void igb_vlan_rx_add_vid(struct net_device *, u16);
+static void igb_vlan_rx_kill_vid(struct net_device *, u16);
+static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
+static void igb_ping_all_vfs(struct igb_adapter *);
+static void igb_msg_task(struct igb_adapter *);
+static void igb_vmm_control(struct igb_adapter *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos);
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
+ struct ifla_vf_info *ivi);
+static void igb_check_vf_rate_limit(struct igb_adapter *);
+
+#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *, pm_message_t);
+static int igb_resume(struct pci_dev *);
+#endif
+static void igb_shutdown(struct pci_dev *);
+#ifdef CONFIG_IGB_DCA
+static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+ .notifier_call = igb_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void igb_netpoll(struct net_device *);
+#endif
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs = 0;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
+ "per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
+ pci_channel_state_t);
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
+static void igb_io_resume(struct pci_dev *);
+
+static struct pci_error_handlers igb_err_handler = {
+ .error_detected = igb_io_error_detected,
+ .slot_reset = igb_io_slot_reset,
+ .resume = igb_io_resume,
+};
+
+
+static struct pci_driver igb_driver = {
+ .name = igb_driver_name,
+ .id_table = igb_pci_tbl,
+ .probe = igb_probe,
+ .remove = __devexit_p(igb_remove),
+#ifdef CONFIG_PM
+ /* Power Management Hooks */
+ .suspend = igb_suspend,
+ .resume = igb_resume,
+#endif
+ .shutdown = igb_shutdown,
+ .err_handler = &igb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+struct igb_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct igb_reg_info igb_reg_info_tbl[] = {
+
+ /* General Registers */
+ {E1000_CTRL, "CTRL"},
+ {E1000_STATUS, "STATUS"},
+ {E1000_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {E1000_ICR, "ICR"},
+
+ /* RX Registers */
+ {E1000_RCTL, "RCTL"},
+ {E1000_RDLEN(0), "RDLEN"},
+ {E1000_RDH(0), "RDH"},
+ {E1000_RDT(0), "RDT"},
+ {E1000_RXDCTL(0), "RXDCTL"},
+ {E1000_RDBAL(0), "RDBAL"},
+ {E1000_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {E1000_TCTL, "TCTL"},
+ {E1000_TDBAL(0), "TDBAL"},
+ {E1000_TDBAH(0), "TDBAH"},
+ {E1000_TDLEN(0), "TDLEN"},
+ {E1000_TDH(0), "TDH"},
+ {E1000_TDT(0), "TDT"},
+ {E1000_TXDCTL(0), "TXDCTL"},
+ {E1000_TDFH, "TDFH"},
+ {E1000_TDFT, "TDFT"},
+ {E1000_TDFHS, "TDFHS"},
+ {E1000_TDFPC, "TDFPC"},
+
+ /* List Terminator */
+ {}
+};
+
+/*
+ * igb_regdump - register printout routine
+ */
+static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
+{
+ int n = 0;
+ char rname[16];
+ u32 regs[8];
+
+ switch (reginfo->ofs) {
+ case E1000_RDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDLEN(n));
+ break;
+ case E1000_RDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDH(n));
+ break;
+ case E1000_RDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDT(n));
+ break;
+ case E1000_RXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RXDCTL(n));
+ break;
+ case E1000_RDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_RDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAH(n));
+ break;
+ case E1000_TDBAL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_RDBAL(n));
+ break;
+ case E1000_TDBAH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDBAH(n));
+ break;
+ case E1000_TDLEN(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDLEN(n));
+ break;
+ case E1000_TDH(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDH(n));
+ break;
+ case E1000_TDT(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TDT(n));
+ break;
+ case E1000_TXDCTL(0):
+ for (n = 0; n < 4; n++)
+ regs[n] = rd32(E1000_TXDCTL(n));
+ break;
+ default:
+ printk(KERN_INFO "%-15s %08x\n",
+ reginfo->name, rd32(reginfo->ofs));
+ return;
+ }
+
+ snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
+ printk(KERN_INFO "%-15s ", rname);
+ for (n = 0; n < 4; n++)
+ printk(KERN_CONT "%08x ", regs[n]);
+ printk(KERN_CONT "\n");
+}
+
+/*
+ * igb_dump - Print registers, tx-rings and rx-rings
+ */
+static void igb_dump(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_reg_info *reginfo;
+ int n = 0;
+ struct igb_ring *tx_ring;
+ union e1000_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct igb_buffer *buffer_info;
+ struct igb_ring *rx_ring;
+ union e1000_adv_rx_desc *rx_desc;
+ u32 staterr;
+ int i = 0;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ printk(KERN_INFO "Device Name state "
+ "trans_start last_rx\n");
+ printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
+ netdev->name,
+ netdev->state,
+ netdev->trans_start,
+ netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ printk(KERN_INFO " Register Name Value\n");
+ for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ igb_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
+ " leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
+ printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 38 36 35 32 31 24 15 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "T [desc] [address 63:0 ] "
+ "[PlPOCIStDDM Ln] [bi->dma ] "
+ "leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
+ " %04X %3X %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)buffer_info->dma,
+ buffer_info->length,
+ buffer_info->next_to_watch,
+ (u64)buffer_info->time_stamp,
+ buffer_info->skb);
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC/U\n");
+ else if (i == tx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == tx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1, phys_to_virt(buffer_info->dma),
+ buffer_info->length, true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ printk(KERN_INFO "Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ printk(KERN_INFO " %5d %5X %5X\n", n,
+ rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 17 16 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ printk(KERN_INFO "------------------------------------\n");
+ printk(KERN_INFO "R [desc] [ PktBuf A0] "
+ "[ HeadBuf DD] [bi->dma ] [bi->skb] "
+ "<-- Adv Rx Read format\n");
+ printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
+ "[vl er S cks ln] ---------------- [bi->skb] "
+ "<-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ if (staterr & E1000_RXD_STAT_DD) {
+ /* Descriptor Done */
+ printk(KERN_INFO "RWB[0x%03X] %016llX "
+ "%016llX ---------------- %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ buffer_info->skb);
+ } else {
+ printk(KERN_INFO "R [0x%03X] %016llX "
+ "%016llX %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)buffer_info->dma,
+ buffer_info->skb);
+
+ if (netif_msg_pktdata(adapter)) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ phys_to_virt(buffer_info->dma),
+ rx_ring->rx_buffer_len, true);
+ if (rx_ring->rx_buffer_len
+ < IGB_RXBUFFER_1024)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS,
+ 16, 1,
+ phys_to_virt(
+ buffer_info->page_dma +
+ buffer_info->page_offset),
+ PAGE_SIZE/2, true);
+ }
+ }
+
+ if (i == rx_ring->next_to_use)
+ printk(KERN_CONT " NTU\n");
+ else if (i == rx_ring->next_to_clean)
+ printk(KERN_CONT " NTC\n");
+ else
+ printk(KERN_CONT "\n");
+
+ }
+ }
+
+exit:
+ return;
+}
+
+
+/**
+ * igb_read_clock - read raw cycle counter (to be used by time counter)
+ */
+static cycle_t igb_read_clock(const struct cyclecounter *tc)
+{
+ struct igb_adapter *adapter =
+ container_of(tc, struct igb_adapter, cycles);
+ struct e1000_hw *hw = &adapter->hw;
+ u64 stamp = 0;
+ int shift = 0;
+
+ /*
+ * The timestamp latches on lowest register read. For the 82580
+ * the lowest register is SYSTIMR instead of SYSTIML. However we never
+ * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
+ */
+ if (hw->mac.type == e1000_82580) {
+ stamp = rd32(E1000_SYSTIMR) >> 8;
+ shift = IGB_82580_TSYNC_SHIFT;
+ }
+
+ stamp |= (u64)rd32(E1000_SYSTIML) << shift;
+ stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
+ return stamp;
+}
+
+/**
+ * igb_get_hw_dev - return device
+ * used by hardware layer to print debugging information
+ **/
+struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
+{
+ struct igb_adapter *adapter = hw->back;
+ return adapter->netdev;
+}
+
+/**
+ * igb_init_module - Driver Registration Routine
+ *
+ * igb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igb_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ igb_driver_string, igb_driver_version);
+
+ printk(KERN_INFO "%s\n", igb_copyright);
+
+#ifdef CONFIG_IGB_DCA
+ dca_register_notify(&dca_notifier);
+#endif
+ ret = pci_register_driver(&igb_driver);
+ return ret;
+}
+
+module_init(igb_init_module);
+
+/**
+ * igb_exit_module - Driver Exit Cleanup Routine
+ *
+ * igb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igb_exit_module(void)
+{
+#ifdef CONFIG_IGB_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
+ pci_unregister_driver(&igb_driver);
+}
+
+module_exit(igb_exit_module);
+
+#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
+/**
+ * igb_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ **/
+static void igb_cache_ring_register(struct igb_adapter *adapter)
+{
+ int i = 0, j = 0;
+ u32 rbase_offset = adapter->vfs_allocated_count;
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82576:
+ /* The queues are allocated for virtualization such that VF 0
+ * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
+ * In order to avoid collision we start at the first free queue
+ * and continue consuming queues in the same sequence
+ */
+ if (adapter->vfs_allocated_count) {
+ for (; i < adapter->rss_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset +
+ Q_IDX_82576(i);
+ }
+ case e1000_82575:
+ case e1000_82580:
+ case e1000_i350:
+ default:
+ for (; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = rbase_offset + i;
+ for (; j < adapter->num_tx_queues; j++)
+ adapter->tx_ring[j]->reg_idx = rbase_offset + j;
+ break;
+ }
+}
+
+static void igb_free_queues(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ kfree(adapter->tx_ring[i]);
+ adapter->tx_ring[i] = NULL;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ kfree(adapter->rx_ring[i]);
+ adapter->rx_ring[i] = NULL;
+ }
+ adapter->num_rx_queues = 0;
+ adapter->num_tx_queues = 0;
+}
+
+/**
+ * igb_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time.
+ **/
+static int igb_alloc_queues(struct igb_adapter *adapter)
+{
+ struct igb_ring *ring;
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+ if (!ring)
+ goto err;
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = i;
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+ /* For 82575, context index must be unique per ring. */
+ if (adapter->hw.mac.type == e1000_82575)
+ ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
+ adapter->tx_ring[i] = ring;
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
+ if (!ring)
+ goto err;
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = i;
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+ ring->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ ring->flags = IGB_RING_FLAG_RX_CSUM; /* enable rx checksum */
+ /* set flag indicating ring supports SCTP checksum offload */
+ if (adapter->hw.mac.type >= e1000_82576)
+ ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
+ adapter->rx_ring[i] = ring;
+ }
+
+ igb_cache_ring_register(adapter);
+
+ return 0;
+
+err:
+ igb_free_queues(adapter);
+
+ return -ENOMEM;
+}
+
+#define IGB_N0_QUEUE -1
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
+{
+ u32 msixbm = 0;
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ivar, index;
+ int rx_queue = IGB_N0_QUEUE;
+ int tx_queue = IGB_N0_QUEUE;
+
+ if (q_vector->rx_ring)
+ rx_queue = q_vector->rx_ring->reg_idx;
+ if (q_vector->tx_ring)
+ tx_queue = q_vector->tx_ring->reg_idx;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ /* The 82575 assigns vectors using a bitmask, which matches the
+ bitmask for the EICR/EIMS/EIMC registers. To assign one
+ or more queues to a vector, we write the appropriate bits
+ into the MSIXBM register for that vector. */
+ if (rx_queue > IGB_N0_QUEUE)
+ msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
+ if (tx_queue > IGB_N0_QUEUE)
+ msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
+ if (!adapter->msix_entries && msix_vector == 0)
+ msixbm |= E1000_EIMS_OTHER;
+ array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+ q_vector->eims_value = msixbm;
+ break;
+ case e1000_82576:
+ /* 82576 uses a table-based method for assigning vectors.
+ Each queue has a single entry in the table to which we write
+ a vector number along with a "valid" bit. Sadly, the layout
+ of the table is somewhat counterintuitive. */
+ if (rx_queue > IGB_N0_QUEUE) {
+ index = (rx_queue & 0x7);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (rx_queue < 8) {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ } else {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ if (tx_queue > IGB_N0_QUEUE) {
+ index = (tx_queue & 0x7);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (tx_queue < 8) {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ } else {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ case e1000_82580:
+ case e1000_i350:
+ /* 82580 uses the same table-based approach as 82576 but has fewer
+ entries as a result we carry over for queues greater than 4. */
+ if (rx_queue > IGB_N0_QUEUE) {
+ index = (rx_queue >> 1);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (rx_queue & 0x1) {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ } else {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ if (tx_queue > IGB_N0_QUEUE) {
+ index = (tx_queue >> 1);
+ ivar = array_rd32(E1000_IVAR0, index);
+ if (tx_queue & 0x1) {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ } else {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ }
+ array_wr32(E1000_IVAR0, index, ivar);
+ }
+ q_vector->eims_value = 1 << msix_vector;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ /* add q_vector eims value to global eims_enable_mask */
+ adapter->eims_enable_mask |= q_vector->eims_value;
+
+ /* configure q_vector to set itr on first interrupt */
+ q_vector->set_itr = 1;
+}
+
+/**
+ * igb_configure_msix - Configure MSI-X hardware
+ *
+ * igb_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igb_configure_msix(struct igb_adapter *adapter)
+{
+ u32 tmp;
+ int i, vector = 0;
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->eims_enable_mask = 0;
+
+ /* set vector for other causes, i.e. link changes */
+ switch (hw->mac.type) {
+ case e1000_82575:
+ tmp = rd32(E1000_CTRL_EXT);
+ /* enable MSI-X PBA support*/
+ tmp |= E1000_CTRL_EXT_PBA_CLR;
+
+ /* Auto-Mask interrupts upon ICR read. */
+ tmp |= E1000_CTRL_EXT_EIAME;
+ tmp |= E1000_CTRL_EXT_IRCA;
+
+ wr32(E1000_CTRL_EXT, tmp);
+
+ /* enable msix_other interrupt */
+ array_wr32(E1000_MSIXBM(0), vector++,
+ E1000_EIMS_OTHER);
+ adapter->eims_other = E1000_EIMS_OTHER;
+
+ break;
+
+ case e1000_82576:
+ case e1000_82580:
+ case e1000_i350:
+ /* Turn on MSI-X capability first, or our settings
+ * won't stick. And it will take days to debug. */
+ wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+ E1000_GPIE_PBA | E1000_GPIE_EIAME |
+ E1000_GPIE_NSICR);
+
+ /* enable msix_other interrupt */
+ adapter->eims_other = 1 << vector;
+ tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+ wr32(E1000_IVAR_MISC, tmp);
+ break;
+ default:
+ /* do nothing, since nothing else supports MSI-X */
+ break;
+ } /* switch (hw->mac.type) */
+
+ adapter->eims_enable_mask |= adapter->eims_other;
+
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ igb_assign_vector(adapter->q_vector[i], vector++);
+
+ wrfl();
+}
+
+/**
+ * igb_request_msix - Initialize MSI-X interrupts
+ *
+ * igb_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igb_request_msix(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ int i, err = 0, vector = 0;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_other, 0, netdev->name, adapter);
+ if (err)
+ goto out;
+ vector++;
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+ q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+ if (q_vector->rx_ring && q_vector->tx_ring)
+ sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+ q_vector->rx_ring->queue_index);
+ else if (q_vector->tx_ring)
+ sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+ q_vector->tx_ring->queue_index);
+ else if (q_vector->rx_ring)
+ sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+ q_vector->rx_ring->queue_index);
+ else
+ sprintf(q_vector->name, "%s-unused", netdev->name);
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igb_msix_ring, 0, q_vector->name,
+ q_vector);
+ if (err)
+ goto out;
+ vector++;
+ }
+
+ igb_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
+static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ pci_disable_msi(adapter->pdev);
+ }
+}
+
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+ int v_idx;
+
+ for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+ adapter->q_vector[v_idx] = NULL;
+ if (!q_vector)
+ continue;
+ netif_napi_del(&q_vector->napi);
+ kfree(q_vector);
+ }
+ adapter->num_q_vectors = 0;
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ *
+ * This function resets the device so that it has 0 rx queues, tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+ igb_free_queues(adapter);
+ igb_free_q_vectors(adapter);
+ igb_reset_interrupt_capability(adapter);
+}
+
+/**
+ * igb_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_set_interrupt_capability(struct igb_adapter *adapter)
+{
+ int err;
+ int numvecs, i;
+
+ /* Number of supported queues. */
+ adapter->num_rx_queues = adapter->rss_queues;
+ if (adapter->vfs_allocated_count)
+ adapter->num_tx_queues = 1;
+ else
+ adapter->num_tx_queues = adapter->rss_queues;
+
+ /* start with one vector for every rx queue */
+ numvecs = adapter->num_rx_queues;
+
+ /* if tx handler is separate add 1 for every tx queue */
+ if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
+ numvecs += adapter->num_tx_queues;
+
+ /* store the number of vectors reserved for queues */
+ adapter->num_q_vectors = numvecs;
+
+ /* add 1 vector for link status interrupts */
+ numvecs++;
+ adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (!adapter->msix_entries)
+ goto msi_only;
+
+ for (i = 0; i < numvecs; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries,
+ numvecs);
+ if (err == 0)
+ goto out;
+
+ igb_reset_interrupt_capability(adapter);
+
+ /* If we can't do MSI-X, try MSI */
+msi_only:
+#ifdef CONFIG_PCI_IOV
+ /* disable SR-IOV for non MSI-X configurations */
+ if (adapter->vf_data) {
+ struct e1000_hw *hw = &adapter->hw;
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&adapter->pdev->dev, "IOV Disabled\n");
+ }
+#endif
+ adapter->vfs_allocated_count = 0;
+ adapter->rss_queues = 1;
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_q_vectors = 1;
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGB_FLAG_HAS_MSI;
+out:
+ /* Notify the stack of the (possibly) reduced queue counts. */
+ netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
+ return netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+}
+
+/**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+ struct igb_q_vector *q_vector;
+ struct e1000_hw *hw = &adapter->hw;
+ int v_idx;
+
+ for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+ q_vector = kzalloc(sizeof(struct igb_q_vector), GFP_KERNEL);
+ if (!q_vector)
+ goto err_out;
+ q_vector->adapter = adapter;
+ q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
+ q_vector->itr_val = IGB_START_ITR;
+ netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
+ adapter->q_vector[v_idx] = q_vector;
+ }
+ return 0;
+
+err_out:
+ igb_free_q_vectors(adapter);
+ return -ENOMEM;
+}
+
+static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
+ int ring_idx, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ q_vector->rx_ring = adapter->rx_ring[ring_idx];
+ q_vector->rx_ring->q_vector = q_vector;
+ q_vector->itr_val = adapter->rx_itr_setting;
+ if (q_vector->itr_val && q_vector->itr_val <= 3)
+ q_vector->itr_val = IGB_START_ITR;
+}
+
+static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
+ int ring_idx, int v_idx)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+
+ q_vector->tx_ring = adapter->tx_ring[ring_idx];
+ q_vector->tx_ring->q_vector = q_vector;
+ q_vector->itr_val = adapter->tx_itr_setting;
+ if (q_vector->itr_val && q_vector->itr_val <= 3)
+ q_vector->itr_val = IGB_START_ITR;
+}
+
+/**
+ * igb_map_ring_to_vector - maps allocated queues to vectors
+ *
+ * This function maps the recently allocated queues to vectors.
+ **/
+static int igb_map_ring_to_vector(struct igb_adapter *adapter)
+{
+ int i;
+ int v_idx = 0;
+
+ if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
+ (adapter->num_q_vectors < adapter->num_tx_queues))
+ return -ENOMEM;
+
+ if (adapter->num_q_vectors >=
+ (adapter->num_rx_queues + adapter->num_tx_queues)) {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+ } else {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ if (i < adapter->num_tx_queues)
+ igb_map_tx_ring_to_vector(adapter, i, v_idx);
+ igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+ }
+ for (; i < adapter->num_tx_queues; i++)
+ igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+ }
+ return 0;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ err = igb_set_interrupt_capability(adapter);
+ if (err)
+ return err;
+
+ err = igb_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ err = igb_alloc_queues(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ goto err_alloc_queues;
+ }
+
+ err = igb_map_ring_to_vector(adapter);
+ if (err) {
+ dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
+ goto err_map_queues;
+ }
+
+
+ return 0;
+err_map_queues:
+ igb_free_queues(adapter);
+err_alloc_queues:
+ igb_free_q_vectors(adapter);
+err_alloc_q_vectors:
+ igb_reset_interrupt_capability(adapter);
+ return err;
+}
+
+/**
+ * igb_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igb_request_irq(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ int err = 0;
+
+ if (adapter->msix_entries) {
+ err = igb_request_msix(adapter);
+ if (!err)
+ goto request_done;
+ /* fall back to MSI */
+ igb_clear_interrupt_scheme(adapter);
+ if (!pci_enable_msi(adapter->pdev))
+ adapter->flags |= IGB_FLAG_HAS_MSI;
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_queues = 1;
+ adapter->num_q_vectors = 1;
+ err = igb_alloc_q_vectors(adapter);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for vectors\n");
+ goto request_done;
+ }
+ err = igb_alloc_queues(adapter);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Unable to allocate memory for queues\n");
+ igb_free_q_vectors(adapter);
+ goto request_done;
+ }
+ igb_setup_all_tx_resources(adapter);
+ igb_setup_all_rx_resources(adapter);
+ } else {
+ igb_assign_vector(adapter->q_vector[0], 0);
+ }
+
+ if (adapter->flags & IGB_FLAG_HAS_MSI) {
+ err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
+ netdev->name, adapter);
+ if (!err)
+ goto request_done;
+
+ /* fall back to legacy interrupts */
+ igb_reset_interrupt_capability(adapter);
+ adapter->flags &= ~IGB_FLAG_HAS_MSI;
+ }
+
+ err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
+ netdev->name, adapter);
+
+ if (err)
+ dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
+ err);
+
+request_done:
+ return err;
+}
+
+static void igb_free_irq(struct igb_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ int vector = 0, i;
+
+ free_irq(adapter->msix_entries[vector++].vector, adapter);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ free_irq(adapter->msix_entries[vector++].vector,
+ q_vector);
+ }
+ } else {
+ free_irq(adapter->pdev->irq, adapter);
+ }
+}
+
+/**
+ * igb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static void igb_irq_disable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * we need to be careful when disabling interrupts. The VFs are also
+ * mapped into these registers and so clearing the bits can cause
+ * issues on the VF drivers so we only need to clear what we set
+ */
+ if (adapter->msix_entries) {
+ u32 regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
+ wr32(E1000_EIMC, adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
+ }
+
+ wr32(E1000_IAM, 0);
+ wr32(E1000_IMC, ~0);
+ wrfl();
+ if (adapter->msix_entries) {
+ int i;
+ for (i = 0; i < adapter->num_q_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * igb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static void igb_irq_enable(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (adapter->msix_entries) {
+ u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
+ u32 regval = rd32(E1000_EIAC);
+ wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
+ regval = rd32(E1000_EIAM);
+ wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
+ wr32(E1000_EIMS, adapter->eims_enable_mask);
+ if (adapter->vfs_allocated_count) {
+ wr32(E1000_MBVFIMR, 0xFF);
+ ims |= E1000_IMS_VMMB;
+ }
+ if (adapter->hw.mac.type == e1000_82580)
+ ims |= E1000_IMS_DRSTA;
+
+ wr32(E1000_IMS, ims);
+ } else {
+ wr32(E1000_IMS, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ wr32(E1000_IAM, IMS_ENABLE_MASK |
+ E1000_IMS_DRSTA);
+ }
+}
+
+static void igb_update_mng_vlan(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 vid = adapter->hw.mng_cookie.vlan_id;
+ u16 old_vid = adapter->mng_vlan_id;
+
+ if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !test_bit(old_vid, adapter->active_vlans)) {
+ /* remove VID from filter table */
+ igb_vfta_set(hw, old_vid, false);
+ }
+}
+
+/**
+ * igb_release_hw_control - release control of the h/w to f/w
+ * @adapter: address of board private structure
+ *
+ * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that the
+ * driver is no longer loaded.
+ *
+ **/
+static void igb_release_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_get_hw_control - get control of the h/w from f/w
+ * @adapter: address of board private structure
+ *
+ * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
+ * For ASF and Pass Through versions of f/w this means that
+ * the driver is loaded.
+ *
+ **/
+static void igb_get_hw_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ wr32(E1000_CTRL_EXT,
+ ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
+}
+
+/**
+ * igb_configure - configure the hardware for RX and TX
+ * @adapter: private board structure
+ **/
+static void igb_configure(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ igb_get_hw_control(adapter);
+ igb_set_rx_mode(netdev);
+
+ igb_restore_vlan(adapter);
+
+ igb_setup_tctl(adapter);
+ igb_setup_mrqc(adapter);
+ igb_setup_rctl(adapter);
+
+ igb_configure_tx(adapter);
+ igb_configure_rx(adapter);
+
+ igb_rx_fifo_flush_82575(&adapter->hw);
+
+ /* call igb_desc_unused which always leaves
+ * at least 1 descriptor unused to make sure
+ * next_to_use != next_to_clean */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct igb_ring *ring = adapter->rx_ring[i];
+ igb_alloc_rx_buffers_adv(ring, igb_desc_unused(ring));
+ }
+}
+
+/**
+ * igb_power_up_link - Power up the phy/serdes link
+ * @adapter: address of board private structure
+ **/
+void igb_power_up_link(struct igb_adapter *adapter)
+{
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_up_phy_copper(&adapter->hw);
+ else
+ igb_power_up_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * igb_power_down_link - Power down the phy/serdes link
+ * @adapter: address of board private structure
+ */
+static void igb_power_down_link(struct igb_adapter *adapter)
+{
+ if (adapter->hw.phy.media_type == e1000_media_type_copper)
+ igb_power_down_phy_copper_82575(&adapter->hw);
+ else
+ igb_shutdown_serdes_link_82575(&adapter->hw);
+}
+
+/**
+ * igb_up - Open the interface and prepare it to handle traffic
+ * @adapter: board private structure
+ **/
+int igb_up(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* hardware has been reset, we need to reload some things */
+ igb_configure(adapter);
+
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ napi_enable(&q_vector->napi);
+ }
+ if (adapter->msix_entries)
+ igb_configure_msix(adapter);
+ else
+ igb_assign_vector(adapter->q_vector[0], 0);
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(adapter->netdev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ return 0;
+}
+
+void igb_down(struct igb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl, rctl;
+ int i;
+
+ /* signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer */
+ set_bit(__IGB_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rctl = rd32(E1000_RCTL);
+ wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
+ /* flush and sleep below */
+
+ netif_tx_stop_all_queues(netdev);
+
+ /* disable transmits in the hardware */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ wr32(E1000_TCTL, tctl);
+ /* flush both disables and wait for them to finish */
+ wrfl();
+ msleep(10);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ napi_disable(&q_vector->napi);
+ }
+
+ igb_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ netif_carrier_off(netdev);
+
+ /* record the stats before reset*/
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ if (!pci_channel_offline(adapter->pdev))
+ igb_reset(adapter);
+ igb_clean_all_tx_rings(adapter);
+ igb_clean_all_rx_rings(adapter);
+#ifdef CONFIG_IGB_DCA
+
+ /* since we reset the hardware DCA settings were cleared */
+ igb_setup_dca(adapter);
+#endif
+}
+
+void igb_reinit_locked(struct igb_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+ igb_down(adapter);
+ igb_up(adapter);
+ clear_bit(__IGB_RESETTING, &adapter->state);
+}
+
+void igb_reset(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_fc_info *fc = &hw->fc;
+ u32 pba = 0, tx_space, min_tx_space, min_rx_space;
+ u16 hwm;
+
+ /* Repartition Pba for greater than 9k mtu
+ * To take effect CTRL.RST is required.
+ */
+ switch (mac->type) {
+ case e1000_i350:
+ case e1000_82580:
+ pba = rd32(E1000_RXPBS);
+ pba = igb_rxpbs_adjust_82580(pba);
+ break;
+ case e1000_82576:
+ pba = rd32(E1000_RXPBS);
+ pba &= E1000_RXPBS_SIZE_MASK_82576;
+ break;
+ case e1000_82575:
+ default:
+ pba = E1000_PBA_34K;
+ break;
+ }
+
+ if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
+ (mac->type < e1000_82576)) {
+ /* adjust PBA for jumbo frames */
+ wr32(E1000_PBA, pba);
+
+ /* To maintain wire speed transmits, the Tx FIFO should be
+ * large enough to accommodate two full transmit packets,
+ * rounded up to the next 1KB and expressed in KB. Likewise,
+ * the Rx FIFO should be large enough to accommodate at least
+ * one full receive packet and is similarly rounded up and
+ * expressed in KB. */
+ pba = rd32(E1000_PBA);
+ /* upper 16 bits has Tx packet buffer allocation size in KB */
+ tx_space = pba >> 16;
+ /* lower 16 bits has Rx packet buffer allocation size in KB */
+ pba &= 0xffff;
+ /* the tx fifo also stores 16 bytes of information about the tx
+ * but don't include ethernet FCS because hardware appends it */
+ min_tx_space = (adapter->max_frame_size +
+ sizeof(union e1000_adv_tx_desc) -
+ ETH_FCS_LEN) * 2;
+ min_tx_space = ALIGN(min_tx_space, 1024);
+ min_tx_space >>= 10;
+ /* software strips receive CRC, so leave room for it */
+ min_rx_space = adapter->max_frame_size;
+ min_rx_space = ALIGN(min_rx_space, 1024);
+ min_rx_space >>= 10;
+
+ /* If current Tx allocation is less than the min Tx FIFO size,
+ * and the min Tx FIFO size is less than the current Rx FIFO
+ * allocation, take space away from current Rx allocation */
+ if (tx_space < min_tx_space &&
+ ((min_tx_space - tx_space) < pba)) {
+ pba = pba - (min_tx_space - tx_space);
+
+ /* if short on rx space, rx wins and must trump tx
+ * adjustment */
+ if (pba < min_rx_space)
+ pba = min_rx_space;
+ }
+ wr32(E1000_PBA, pba);
+ }
+
+ /* flow control settings */
+ /* The high water mark must be low enough to fit one full frame
+ * (or the size used for early receive) above it in the Rx FIFO.
+ * Set it to the lower of:
+ * - 90% of the Rx FIFO size, or
+ * - the full Rx FIFO size minus one full frame */
+ hwm = min(((pba << 10) * 9 / 10),
+ ((pba << 10) - 2 * adapter->max_frame_size));
+
+ fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
+ fc->low_water = fc->high_water - 16;
+ fc->pause_time = 0xFFFF;
+ fc->send_xon = 1;
+ fc->current_mode = fc->requested_mode;
+
+ /* disable receive for all VFs and wait one second */
+ if (adapter->vfs_allocated_count) {
+ int i;
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++)
+ adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
+
+ /* ping all the active vfs to let them know we are going down */
+ igb_ping_all_vfs(adapter);
+
+ /* disable transmits and receives */
+ wr32(E1000_VFRE, 0);
+ wr32(E1000_VFTE, 0);
+ }
+
+ /* Allow time for pending master requests to run */
+ hw->mac.ops.reset_hw(hw);
+ wr32(E1000_WUC, 0);
+
+ if (hw->mac.ops.init_hw(hw))
+ dev_err(&pdev->dev, "Hardware Error\n");
+ if (hw->mac.type > e1000_82580) {
+ if (adapter->flags & IGB_FLAG_DMAC) {
+ u32 reg;
+
+ /*
+ * DMA Coalescing high water mark needs to be higher
+ * than * the * Rx threshold. The Rx threshold is
+ * currently * pba - 6, so we * should use a high water
+ * mark of pba * - 4. */
+ hwm = (pba - 4) << 10;
+
+ reg = (((pba-6) << E1000_DMACR_DMACTHR_SHIFT)
+ & E1000_DMACR_DMACTHR_MASK);
+
+ /* transition to L0x or L1 if available..*/
+ reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
+
+ /* watchdog timer= +-1000 usec in 32usec intervals */
+ reg |= (1000 >> 5);
+ wr32(E1000_DMACR, reg);
+
+ /* no lower threshold to disable coalescing(smart fifb)
+ * -UTRESH=0*/
+ wr32(E1000_DMCRTRH, 0);
+
+ /* set hwm to PBA - 2 * max frame size */
+ wr32(E1000_FCRTC, hwm);
+
+ /*
+ * This sets the time to wait before requesting tran-
+ * sition to * low power state to number of usecs needed
+ * to receive 1 512 * byte frame at gigabit line rate
+ */
+ reg = rd32(E1000_DMCTLX);
+ reg |= IGB_DMCTLX_DCFLUSH_DIS;
+
+ /* Delay 255 usec before entering Lx state. */
+ reg |= 0xFF;
+ wr32(E1000_DMCTLX, reg);
+
+ /* free space in Tx packet buffer to wake from DMAC */
+ wr32(E1000_DMCTXTH,
+ (IGB_MIN_TXPBSIZE -
+ (IGB_TX_BUF_4096 + adapter->max_frame_size))
+ >> 6);
+
+ /* make low power state decision controlled by DMAC */
+ reg = rd32(E1000_PCIEMISC);
+ reg |= E1000_PCIEMISC_LX_DECISION;
+ wr32(E1000_PCIEMISC, reg);
+ } /* end if IGB_FLAG_DMAC set */
+ }
+ if (hw->mac.type == e1000_82580) {
+ u32 reg = rd32(E1000_PCIEMISC);
+ wr32(E1000_PCIEMISC,
+ reg & ~E1000_PCIEMISC_LX_DECISION);
+ }
+ if (!netif_running(adapter->netdev))
+ igb_power_down_link(adapter);
+
+ igb_update_mng_vlan(adapter);
+
+ /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
+ wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
+
+ igb_get_phy_info(hw);
+}
+
+static u32 igb_fix_features(struct net_device *netdev, u32 features)
+{
+ /*
+ * Since there is no support for separate rx/tx vlan accel
+ * enable/disable make sure tx flag is always in same state as rx.
+ */
+ if (features & NETIF_F_HW_VLAN_RX)
+ features |= NETIF_F_HW_VLAN_TX;
+ else
+ features &= ~NETIF_F_HW_VLAN_TX;
+
+ return features;
+}
+
+static int igb_set_features(struct net_device *netdev, u32 features)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ int i;
+ u32 changed = netdev->features ^ features;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ if (features & NETIF_F_RXCSUM)
+ adapter->rx_ring[i]->flags |= IGB_RING_FLAG_RX_CSUM;
+ else
+ adapter->rx_ring[i]->flags &= ~IGB_RING_FLAG_RX_CSUM;
+ }
+
+ if (changed & NETIF_F_HW_VLAN_RX)
+ igb_vlan_mode(netdev, features);
+
+ return 0;
+}
+
+static const struct net_device_ops igb_netdev_ops = {
+ .ndo_open = igb_open,
+ .ndo_stop = igb_close,
+ .ndo_start_xmit = igb_xmit_frame_adv,
+ .ndo_get_stats64 = igb_get_stats64,
+ .ndo_set_rx_mode = igb_set_rx_mode,
+ .ndo_set_multicast_list = igb_set_rx_mode,
+ .ndo_set_mac_address = igb_set_mac,
+ .ndo_change_mtu = igb_change_mtu,
+ .ndo_do_ioctl = igb_ioctl,
+ .ndo_tx_timeout = igb_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
+ .ndo_set_vf_mac = igb_ndo_set_vf_mac,
+ .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
+ .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw,
+ .ndo_get_vf_config = igb_ndo_get_vf_config,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igb_netpoll,
+#endif
+ .ndo_fix_features = igb_fix_features,
+ .ndo_set_features = igb_set_features,
+};
+
+/**
+ * igb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit igb_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igb_adapter *adapter;
+ struct e1000_hw *hw;
+ u16 eeprom_data = 0;
+ s32 ret_val;
+ static int global_quad_port_a; /* global quad port a indication */
+ const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
+ unsigned long mmio_start, mmio_len;
+ int err, pci_using_dac;
+ u16 eeprom_apme_mask = IGB_EEPROM_APME;
+ u8 part_str[E1000_PBANUM_LENGTH];
+
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ }
+
+ err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM),
+ igb_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
+ IGB_ABS_MAX_TX_QUEUES);
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+
+ err = -EIO;
+ hw->hw_addr = ioremap(mmio_start, mmio_len);
+ if (!hw->hw_addr)
+ goto err_ioremap;
+
+ netdev->netdev_ops = &igb_netdev_ops;
+ igb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len;
+
+ /* PCI config space info */
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* Copy the default MAC, PHY and NVM function pointers */
+ memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
+ memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
+ memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
+ /* Initialize skew-specific constants */
+ err = ei->get_invariants(hw);
+ if (err)
+ goto err_sw_init;
+
+ /* setup the private structure */
+ err = igb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ igb_get_bus_info_pcie(hw);
+
+ hw->phy.autoneg_wait_to_complete = false;
+
+ /* Copper options */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ hw->phy.mdix = AUTO_ALL_MODES;
+ hw->phy.disable_polarity_correction = false;
+ hw->phy.ms_type = e1000_ms_hw_default;
+ }
+
+ if (igb_check_reset_block(hw))
+ dev_info(&pdev->dev,
+ "PHY reset is blocked due to SOL/IDER session.\n");
+
+ netdev->hw_features = NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_RX;
+
+ netdev->features = netdev->hw_features |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (hw->mac.type >= e1000_82576) {
+ netdev->hw_features |= NETIF_F_SCTP_CSUM;
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ }
+
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
+
+ /* before reading the NVM, reset the controller to put the device in a
+ * known good starting state */
+ hw->mac.ops.reset_hw(hw);
+
+ /* make sure the NVM is good */
+ if (hw->nvm.ops.validate(hw) < 0) {
+ dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* copy the MAC address out of the NVM */
+ if (hw->mac.ops.read_mac_addr(hw))
+ dev_err(&pdev->dev, "NVM Read Error\n");
+
+ memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ setup_timer(&adapter->watchdog_timer, igb_watchdog,
+ (unsigned long) adapter);
+ setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igb_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
+
+ /* Initialize link properties that are user-changeable */
+ adapter->fc_autoneg = true;
+ hw->mac.autoneg = true;
+ hw->phy.autoneg_advertised = 0x2f;
+
+ hw->fc.requested_mode = e1000_fc_default;
+ hw->fc.current_mode = e1000_fc_default;
+
+ igb_validate_mdi_setting(hw);
+
+ /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
+ * enable the ACPI Magic Packet filter
+ */
+
+ if (hw->bus.func == 0)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+ else if (hw->mac.type >= e1000_82580)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
+ NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
+ &eeprom_data);
+ else if (hw->bus.func == 1)
+ hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+ if (eeprom_data & eeprom_apme_mask)
+ adapter->eeprom_wol |= E1000_WUFC_MAG;
+
+ /* now that we have the eeprom settings, apply the special cases where
+ * the eeprom may be wrong or the board simply won't support wake on
+ * lan on a particular port */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82575GB_QUAD_COPPER:
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82575EB_FIBER_SERDES:
+ case E1000_DEV_ID_82576_FIBER:
+ case E1000_DEV_ID_82576_SERDES:
+ /* Wake events only supported on port A for dual fiber
+ * regardless of eeprom setting */
+ if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
+ adapter->eeprom_wol = 0;
+ break;
+ case E1000_DEV_ID_82576_QUAD_COPPER:
+ case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
+ /* if quad port adapter, disable WoL on all but port A */
+ if (global_quad_port_a != 0)
+ adapter->eeprom_wol = 0;
+ else
+ adapter->flags |= IGB_FLAG_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ if (++global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ }
+
+ /* initialize the wol settings based on the eeprom settings */
+ adapter->wol = adapter->eeprom_wol;
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* reset the hardware with the new settings */
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ igb_vlan_mode(netdev, netdev->features);
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+#ifdef CONFIG_IGB_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ }
+
+#endif
+ /* do hw tstamp init after resetting */
+ igb_init_hw_timer(adapter);
+
+ dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
+ /* print bus type/speed/width info */
+ dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
+ netdev->name,
+ ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+ (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
+ "unknown"),
+ ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
+ (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
+ (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
+ "unknown"),
+ netdev->dev_addr);
+
+ ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
+ if (ret_val)
+ strcpy(part_str, "Unknown");
+ dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
+ dev_info(&pdev->dev,
+ "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
+ adapter->msix_entries ? "MSI-X" :
+ (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+ switch (hw->mac.type) {
+ case e1000_i350:
+ igb_set_eee_i350(hw);
+ break;
+ default:
+ break;
+ }
+ return 0;
+
+err_register:
+ igb_release_hw_control(adapter);
+err_eeprom:
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
+
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+err_sw_init:
+ igb_clear_interrupt_scheme(adapter);
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * igb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit igb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * The watchdog timer may be rescheduled, so explicitly
+ * disable watchdog from being rescheduled.
+ */
+ set_bit(__IGB_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+ del_timer_sync(&adapter->phy_info_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+#ifdef CONFIG_IGB_DCA
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ dev_info(&pdev->dev, "DCA disabled\n");
+ dca_remove_requester(&pdev->dev);
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+#endif
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ igb_release_hw_control(adapter);
+
+ unregister_netdev(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PCI_IOV
+ /* reclaim resources allocated to VFs */
+ if (adapter->vf_data) {
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(pdev);
+ msleep(500);
+
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+ wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
+ wrfl();
+ msleep(100);
+ dev_info(&pdev->dev, "IOV Disabled\n");
+ }
+#endif
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+
+ free_netdev(netdev);
+
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs. The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
+{
+#ifdef CONFIG_PCI_IOV
+ struct pci_dev *pdev = adapter->pdev;
+
+ if (adapter->vfs_allocated_count) {
+ adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+ sizeof(struct vf_data_storage),
+ GFP_KERNEL);
+ /* if allocation failed then we do not support SR-IOV */
+ if (!adapter->vf_data) {
+ adapter->vfs_allocated_count = 0;
+ dev_err(&pdev->dev, "Unable to allocate memory for VF "
+ "Data Storage\n");
+ }
+ }
+
+ if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
+ kfree(adapter->vf_data);
+ adapter->vf_data = NULL;
+#endif /* CONFIG_PCI_IOV */
+ adapter->vfs_allocated_count = 0;
+#ifdef CONFIG_PCI_IOV
+ } else {
+ unsigned char mac_addr[ETH_ALEN];
+ int i;
+ dev_info(&pdev->dev, "%d vfs allocated\n",
+ adapter->vfs_allocated_count);
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ random_ether_addr(mac_addr);
+ igb_set_vf_mac(adapter, i, mac_addr);
+ }
+ /* DMA Coalescing is not supported in IOV mode. */
+ if (adapter->flags & IGB_FLAG_DMAC)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+ }
+#endif /* CONFIG_PCI_IOV */
+}
+
+
+/**
+ * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
+ * @adapter: board private structure to initialize
+ *
+ * igb_init_hw_timer initializes the function pointer and values for the hw
+ * timer found in hardware.
+ **/
+static void igb_init_hw_timer(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ switch (hw->mac.type) {
+ case e1000_i350:
+ case e1000_82580:
+ memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+ adapter->cycles.read = igb_read_clock;
+ adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+ adapter->cycles.mult = 1;
+ /*
+ * The 82580 timesync updates the system timer every 8ns by 8ns
+ * and the value cannot be shifted. Instead we need to shift
+ * the registers to generate a 64bit timer value. As a result
+ * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
+ * 24 in order to generate a larger value for synchronization.
+ */
+ adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
+ /* disable system timer temporarily by setting bit 31 */
+ wr32(E1000_TSAUXC, 0x80000000);
+ wrfl();
+
+ /* Set registers so that rollover occurs soon to test this. */
+ wr32(E1000_SYSTIMR, 0x00000000);
+ wr32(E1000_SYSTIML, 0x80000000);
+ wr32(E1000_SYSTIMH, 0x000000FF);
+ wrfl();
+
+ /* enable system timer by clearing bit 31 */
+ wr32(E1000_TSAUXC, 0x0);
+ wrfl();
+
+ timecounter_init(&adapter->clock,
+ &adapter->cycles,
+ ktime_to_ns(ktime_get_real()));
+ /*
+ * Synchronize our NIC clock against system wall clock. NIC
+ * time stamp reading requires ~3us per sample, each sample
+ * was pretty stable even under load => only require 10
+ * samples for each offset comparison.
+ */
+ memset(&adapter->compare, 0, sizeof(adapter->compare));
+ adapter->compare.source = &adapter->clock;
+ adapter->compare.target = ktime_get_real;
+ adapter->compare.num_samples = 10;
+ timecompare_update(&adapter->compare, 0);
+ break;
+ case e1000_82576:
+ /*
+ * Initialize hardware timer: we keep it running just in case
+ * that some program needs it later on.
+ */
+ memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+ adapter->cycles.read = igb_read_clock;
+ adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+ adapter->cycles.mult = 1;
+ /**
+ * Scale the NIC clock cycle by a large factor so that
+ * relatively small clock corrections can be added or
+ * subtracted at each clock tick. The drawbacks of a large
+ * factor are a) that the clock register overflows more quickly
+ * (not such a big deal) and b) that the increment per tick has
+ * to fit into 24 bits. As a result we need to use a shift of
+ * 19 so we can fit a value of 16 into the TIMINCA register.
+ */
+ adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+ wr32(E1000_TIMINCA,
+ (1 << E1000_TIMINCA_16NS_SHIFT) |
+ (16 << IGB_82576_TSYNC_SHIFT));
+
+ /* Set registers so that rollover occurs soon to test this. */
+ wr32(E1000_SYSTIML, 0x00000000);
+ wr32(E1000_SYSTIMH, 0xFF800000);
+ wrfl();
+
+ timecounter_init(&adapter->clock,
+ &adapter->cycles,
+ ktime_to_ns(ktime_get_real()));
+ /*
+ * Synchronize our NIC clock against system wall clock. NIC
+ * time stamp reading requires ~3us per sample, each sample
+ * was pretty stable even under load => only require 10
+ * samples for each offset comparison.
+ */
+ memset(&adapter->compare, 0, sizeof(adapter->compare));
+ adapter->compare.source = &adapter->clock;
+ adapter->compare.target = ktime_get_real;
+ adapter->compare.num_samples = 10;
+ timecompare_update(&adapter->compare, 0);
+ break;
+ case e1000_82575:
+ /* 82575 does not support timesync */
+ default:
+ break;
+ }
+
+}
+
+/**
+ * igb_sw_init - Initialize general software structures (struct igb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igb_sw_init(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
+
+ adapter->tx_ring_count = IGB_DEFAULT_TXD;
+ adapter->rx_ring_count = IGB_DEFAULT_RXD;
+ adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+ adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ spin_lock_init(&adapter->stats64_lock);
+#ifdef CONFIG_PCI_IOV
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (max_vfs > 7) {
+ dev_warn(&pdev->dev,
+ "Maximum of 7 VFs per PF, using max\n");
+ adapter->vfs_allocated_count = 7;
+ } else
+ adapter->vfs_allocated_count = max_vfs;
+ break;
+ default:
+ break;
+ }
+#endif /* CONFIG_PCI_IOV */
+ adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
+ /* i350 cannot do RSS and SR-IOV at the same time */
+ if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
+ adapter->rss_queues = 1;
+
+ /*
+ * if rss_queues > 4 or vfs are going to be allocated with rss_queues
+ * then we should combine the queues into a queue pair in order to
+ * conserve interrupts due to limited supply
+ */
+ if ((adapter->rss_queues > 4) ||
+ ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
+ adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
+
+ /* This call may decrease the number of queues */
+ if (igb_init_interrupt_scheme(adapter)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_probe_vfs(adapter);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igb_irq_disable(adapter);
+
+ if (hw->mac.type == e1000_i350)
+ adapter->flags &= ~IGB_FLAG_DMAC;
+
+ set_bit(__IGB_DOWN, &adapter->state);
+ return 0;
+}
+
+/**
+ * igb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igb_open(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+ int i;
+
+ /* disallow open during test */
+ if (test_bit(__IGB_TESTING, &adapter->state))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = igb_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igb_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ igb_power_up_link(adapter);
+
+ /* before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so. */
+ igb_configure(adapter);
+
+ err = igb_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as igb_up() */
+ clear_bit(__IGB_DOWN, &adapter->state);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ napi_enable(&q_vector->napi);
+ }
+
+ /* Clear any pending interrupts. */
+ rd32(E1000_ICR);
+
+ igb_irq_enable(adapter);
+
+ /* notify VFs that reset has been completed */
+ if (adapter->vfs_allocated_count) {
+ u32 reg_data = rd32(E1000_CTRL_EXT);
+ reg_data |= E1000_CTRL_EXT_PFRSTD;
+ wr32(E1000_CTRL_EXT, reg_data);
+ }
+
+ netif_tx_start_all_queues(netdev);
+
+ /* start the watchdog. */
+ hw->mac.get_link_status = 1;
+ schedule_work(&adapter->watchdog_task);
+
+ return 0;
+
+err_req_irq:
+ igb_release_hw_control(adapter);
+ igb_power_down_link(adapter);
+ igb_free_all_rx_resources(adapter);
+err_setup_rx:
+ igb_free_all_tx_resources(adapter);
+err_setup_tx:
+ igb_reset(adapter);
+
+ return err;
+}
+
+/**
+ * igb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the driver's control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int igb_close(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
+ igb_down(adapter);
+
+ igb_free_irq(adapter);
+
+ igb_free_all_tx_resources(adapter);
+ igb_free_all_rx_resources(adapter);
+
+ return 0;
+}
+
+/**
+ * igb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int size;
+
+ size = sizeof(struct igb_buffer) * tx_ring->count;
+ tx_ring->buffer_info = vzalloc(size);
+ if (!tx_ring->buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(dev,
+ tx_ring->size,
+ &tx_ring->dma,
+ GFP_KERNEL);
+
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ return 0;
+
+err:
+ vfree(tx_ring->buffer_info);
+ dev_err(dev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_tx_resources - wrapper to allocate Tx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = igb_setup_tx_resources(adapter->tx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Tx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_tx_resources(adapter->tx_ring[i]);
+ break;
+ }
+ }
+
+ for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
+ int r_idx = i % adapter->num_tx_queues;
+ adapter->multi_tx_table[i] = adapter->tx_ring[r_idx];
+ }
+ return err;
+}
+
+/**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 tctl;
+
+ /* disable queue 0 which is enabled by default on 82575 and 82576 */
+ wr32(E1000_TXDCTL(0), 0);
+
+ /* Program the Transmit Control Register */
+ tctl = rd32(E1000_TCTL);
+ tctl &= ~E1000_TCTL_CT;
+ tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+ (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+ igb_config_collision_dist(hw);
+
+ /* Enable transmits */
+ tctl |= E1000_TCTL_EN;
+
+ wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 txdctl;
+ u64 tdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+
+ /* disable the queue */
+ txdctl = rd32(E1000_TXDCTL(reg_idx));
+ wr32(E1000_TXDCTL(reg_idx),
+ txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+ wrfl();
+ mdelay(10);
+
+ wr32(E1000_TDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_tx_desc));
+ wr32(E1000_TDBAL(reg_idx),
+ tdba & 0x00000000ffffffffULL);
+ wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+ ring->head = hw->hw_addr + E1000_TDH(reg_idx);
+ ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+ writel(0, ring->head);
+ writel(0, ring->tail);
+
+ txdctl |= IGB_TX_PTHRESH;
+ txdctl |= IGB_TX_HTHRESH << 8;
+ txdctl |= IGB_TX_WTHRESH << 16;
+
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
+ * igb_configure_tx - Configure transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igb_configure_tx(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+/**
+ * igb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int size, desc_len;
+
+ size = sizeof(struct igb_buffer) * rx_ring->count;
+ rx_ring->buffer_info = vzalloc(size);
+ if (!rx_ring->buffer_info)
+ goto err;
+
+ desc_len = sizeof(union e1000_adv_rx_desc);
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * desc_len;
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(dev,
+ rx_ring->size,
+ &rx_ring->dma,
+ GFP_KERNEL);
+
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+
+err:
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the receive descriptor"
+ " ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igb_setup_all_rx_resources - wrapper to allocate Rx resources
+ * (Descriptors) for all queues
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = igb_setup_rx_resources(adapter->rx_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev,
+ "Allocation for Rx Queue %u failed\n", i);
+ for (i--; i >= 0; i--)
+ igb_free_rx_resources(adapter->rx_ring[i]);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 mrqc, rxcsum;
+ u32 j, num_rx_queues, shift = 0, shift2 = 0;
+ union e1000_reta {
+ u32 dword;
+ u8 bytes[4];
+ } reta;
+ static const u8 rsshash[40] = {
+ 0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
+ 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
+ 0xae, 0x7b, 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
+ 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
+
+ /* Fill out hash function seeds */
+ for (j = 0; j < 10; j++) {
+ u32 rsskey = rsshash[(j * 4)];
+ rsskey |= rsshash[(j * 4) + 1] << 8;
+ rsskey |= rsshash[(j * 4) + 2] << 16;
+ rsskey |= rsshash[(j * 4) + 3] << 24;
+ array_wr32(E1000_RSSRK(0), j, rsskey);
+ }
+
+ num_rx_queues = adapter->rss_queues;
+
+ if (adapter->vfs_allocated_count) {
+ /* 82575 and 82576 supports 2 RSS queues for VMDq */
+ switch (hw->mac.type) {
+ case e1000_i350:
+ case e1000_82580:
+ num_rx_queues = 1;
+ shift = 0;
+ break;
+ case e1000_82576:
+ shift = 3;
+ num_rx_queues = 2;
+ break;
+ case e1000_82575:
+ shift = 2;
+ shift2 = 6;
+ default:
+ break;
+ }
+ } else {
+ if (hw->mac.type == e1000_82575)
+ shift = 6;
+ }
+
+ for (j = 0; j < (32 * 4); j++) {
+ reta.bytes[j & 3] = (j % num_rx_queues) << shift;
+ if (shift2)
+ reta.bytes[j & 3] |= num_rx_queues << shift2;
+ if ((j & 3) == 3)
+ wr32(E1000_RETA(j >> 2), reta.dword);
+ }
+
+ /*
+ * Disable raw packet checksumming so that RSS hash is placed in
+ * descriptor on writeback. No need to enable TCP/UDP/IP checksum
+ * offloads as they are enabled by default
+ */
+ rxcsum = rd32(E1000_RXCSUM);
+ rxcsum |= E1000_RXCSUM_PCSD;
+
+ if (adapter->hw.mac.type >= e1000_82576)
+ /* Enable Receive Checksum Offload for SCTP */
+ rxcsum |= E1000_RXCSUM_CRCOFL;
+
+ /* Don't need to set TUOFL or IPOFL, they default to 1 */
+ wr32(E1000_RXCSUM, rxcsum);
+
+ /* If VMDq is enabled then we set the appropriate mode for that, else
+ * we default to RSS so that an RSS hash is calculated per packet even
+ * if we are only using one queue */
+ if (adapter->vfs_allocated_count) {
+ if (hw->mac.type > e1000_82575) {
+ /* Set the default pool for the PF's first queue */
+ u32 vtctl = rd32(E1000_VT_CTL);
+ vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+ E1000_VT_CTL_DISABLE_DEF_POOL);
+ vtctl |= adapter->vfs_allocated_count <<
+ E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+ wr32(E1000_VT_CTL, vtctl);
+ }
+ if (adapter->rss_queues > 1)
+ mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+ else
+ mrqc = E1000_MRQC_ENABLE_VMDQ;
+ } else {
+ mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+ }
+ igb_vmm_control(adapter);
+
+ /*
+ * Generate RSS hash based on TCP port numbers and/or
+ * IPv4/v6 src and dst addresses since UDP cannot be
+ * hashed reliably due to IP fragmentation
+ */
+ mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
+ E1000_MRQC_RSS_FIELD_IPV4_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6 |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP |
+ E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
+
+ wr32(E1000_MRQC, mrqc);
+}
+
+/**
+ * igb_setup_rctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_rctl(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rctl;
+
+ rctl = rd32(E1000_RCTL);
+
+ rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
+ rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
+
+ rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
+ (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
+
+ /*
+ * enable stripping of CRC. It's unlikely this will break BMC
+ * redirection as it did with e1000. Newer features require
+ * that the HW strips the CRC.
+ */
+ rctl |= E1000_RCTL_SECRC;
+
+ /* disable store bad packets and clear size bits. */
+ rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
+
+ /* enable LPE to prevent packets larger than max_frame_size */
+ rctl |= E1000_RCTL_LPE;
+
+ /* disable queue 0 to prevent tail write w/o re-config */
+ wr32(E1000_RXDCTL(0), 0);
+
+ /* Attention!!! For SR-IOV PF driver operations you must enable
+ * queue drop for all VF and PF queues to prevent head of line blocking
+ * if an un-trusted VF does not provide descriptors to hardware.
+ */
+ if (adapter->vfs_allocated_count) {
+ /* set all queue drop enable bits */
+ wr32(E1000_QDE, ALL_QUEUES);
+ }
+
+ wr32(E1000_RCTL, rctl);
+}
+
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+ int vfn)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /* if it isn't the PF check to see if VFs are enabled and
+ * increase the size to support vlan tags */
+ if (vfn < adapter->vfs_allocated_count &&
+ adapter->vf_data[vfn].vlans_enabled)
+ size += VLAN_TAG_SIZE;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr &= ~E1000_VMOLR_RLPML_MASK;
+ vmolr |= size | E1000_VMOLR_LPE;
+ wr32(E1000_VMOLR(vfn), vmolr);
+
+ return 0;
+}
+
+/**
+ * igb_rlpml_set - set maximum receive packet size
+ * @adapter: board private structure
+ *
+ * Configure maximum receivable packet size.
+ **/
+static void igb_rlpml_set(struct igb_adapter *adapter)
+{
+ u32 max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+ u16 pf_id = adapter->vfs_allocated_count;
+
+ max_frame_size = adapter->max_frame_size + VLAN_TAG_SIZE;
+
+ /* if vfs are enabled we set RLPML to the largest possible request
+ * size and set the VMOLR RLPML to the size we need */
+ if (pf_id) {
+ igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
+ max_frame_size = MAX_JUMBO_FRAME_SIZE;
+ }
+
+ wr32(E1000_RLPML, max_frame_size);
+}
+
+static inline void igb_set_vmolr(struct igb_adapter *adapter,
+ int vfn, bool aupe)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr;
+
+ /*
+ * This register exists only on 82576 and newer so if we are older then
+ * we should exit and do nothing
+ */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ vmolr = rd32(E1000_VMOLR(vfn));
+ vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
+ if (aupe)
+ vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
+ else
+ vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
+
+ /* clear all bits that might not be set */
+ vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+ if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+ /*
+ * for VMDq only allow the VFs and pool 0 to accept broadcast and
+ * multicast packets
+ */
+ if (vfn <= adapter->vfs_allocated_count)
+ vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
+
+ wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+ struct igb_ring *ring)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ int reg_idx = ring->reg_idx;
+ u32 srrctl, rxdctl;
+
+ /* disable the queue */
+ rxdctl = rd32(E1000_RXDCTL(reg_idx));
+ wr32(E1000_RXDCTL(reg_idx),
+ rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+
+ /* Set DMA base address registers */
+ wr32(E1000_RDBAL(reg_idx),
+ rdba & 0x00000000ffffffffULL);
+ wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+ wr32(E1000_RDLEN(reg_idx),
+ ring->count * sizeof(union e1000_adv_rx_desc));
+
+ /* initialize head and tail */
+ ring->head = hw->hw_addr + E1000_RDH(reg_idx);
+ ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+ writel(0, ring->head);
+ writel(0, ring->tail);
+
+ /* set descriptor configuration */
+ if (ring->rx_buffer_len < IGB_RXBUFFER_1024) {
+ srrctl = ALIGN(ring->rx_buffer_len, 64) <<
+ E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
+ srrctl |= IGB_RXBUFFER_16384 >>
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
+#else
+ srrctl |= (PAGE_SIZE / 2) >>
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
+#endif
+ srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ } else {
+ srrctl = ALIGN(ring->rx_buffer_len, 1024) >>
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ }
+ if (hw->mac.type == e1000_82580)
+ srrctl |= E1000_SRRCTL_TIMESTAMP;
+ /* Only set Drop Enable if we are supporting multiple queues */
+ if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+ /* set filtering for VMDQ pools */
+ igb_set_vmolr(adapter, reg_idx & 0x7, true);
+
+ /* enable receive descriptor fetching */
+ rxdctl = rd32(E1000_RXDCTL(reg_idx));
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ rxdctl &= 0xFFF00000;
+ rxdctl |= IGB_RX_PTHRESH;
+ rxdctl |= IGB_RX_HTHRESH << 8;
+ rxdctl |= IGB_RX_WTHRESH << 16;
+ wr32(E1000_RXDCTL(reg_idx), rxdctl);
+}
+
+/**
+ * igb_configure_rx - Configure receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igb_configure_rx(struct igb_adapter *adapter)
+{
+ int i;
+
+ /* set UTA to appropriate mode */
+ igb_set_uta(adapter);
+
+ /* set the correct pool for the PF default MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
+}
+
+/**
+ * igb_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void igb_free_tx_resources(struct igb_ring *tx_ring)
+{
+ igb_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!tx_ring->desc)
+ return;
+
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void igb_free_all_tx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_free_tx_resources(adapter->tx_ring[i]);
+}
+
+void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
+ struct igb_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(tx_ring->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_single(tx_ring->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ buffer_info->length = 0;
+ buffer_info->next_to_watch = 0;
+ buffer_info->mapped_as_page = false;
+}
+
+/**
+ * igb_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igb_clean_tx_ring(struct igb_ring *tx_ring)
+{
+ struct igb_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!tx_ring->buffer_info)
+ return;
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ size = sizeof(struct igb_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * igb_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ igb_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+/**
+ * igb_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void igb_free_rx_resources(struct igb_ring *rx_ring)
+{
+ igb_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!rx_ring->desc)
+ return;
+
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igb_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void igb_free_all_rx_resources(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void igb_clean_rx_ring(struct igb_ring *rx_ring)
+{
+ struct igb_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!rx_ring->buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ dma_unmap_single(rx_ring->dev,
+ buffer_info->dma,
+ rx_ring->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ if (buffer_info->page_dma) {
+ dma_unmap_page(rx_ring->dev,
+ buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ buffer_info->page_dma = 0;
+ }
+ if (buffer_info->page) {
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ buffer_info->page_offset = 0;
+ }
+ }
+
+ size = sizeof(struct igb_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * igb_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ igb_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * igb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_set_mac(struct net_device *netdev, void *p)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ /* set the correct pool for the new PF MAC address in entry 0 */
+ igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+ adapter->vfs_allocated_count);
+
+ return 0;
+}
+
+/**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ * 0 on no addresses written
+ * X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list;
+ int i;
+
+ if (netdev_mc_empty(netdev)) {
+ /* nothing to program, so clear mc list */
+ igb_update_mc_addr_list(hw, NULL, 0);
+ igb_restore_vf_multicasts(adapter);
+ return 0;
+ }
+
+ mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list)
+ return -ENOMEM;
+
+ /* The shared function expects a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ igb_update_mc_addr_list(hw, mta_list, i);
+ kfree(mta_list);
+
+ return netdev_mc_count(netdev);
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ igb_rar_set_qsel(adapter, ha->addr,
+ rar_entries--,
+ vfn);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--) {
+ wr32(E1000_RAH(rar_entries), 0);
+ wr32(E1000_RAL(rar_entries), 0);
+ }
+ wrfl();
+
+ return count;
+}
+
+/**
+ * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_mode entry point is called whenever the unicast or multicast
+ * address lists or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igb_set_rx_mode(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->vfs_allocated_count;
+ u32 rctl, vmolr = 0;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+ rctl = rd32(E1000_RCTL);
+
+ /* clear the effected bits */
+ rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
+ vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else {
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ count = igb_write_mc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_MPE;
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (count) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ }
+ }
+ /*
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
+ */
+ count = igb_write_uc_addr_list(netdev);
+ if (count < 0) {
+ rctl |= E1000_RCTL_UPE;
+ vmolr |= E1000_VMOLR_ROPE;
+ }
+ rctl |= E1000_RCTL_VFE;
+ }
+ wr32(E1000_RCTL, rctl);
+
+ /*
+ * In order to support SR-IOV and eventually VMDq it is necessary to set
+ * the VMOLR to enable the appropriate modes. Without this workaround
+ * we will have issues with VLAN tag stripping not being done for frames
+ * that are only arriving because we are the default pool
+ */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ vmolr |= rd32(E1000_VMOLR(vfn)) &
+ ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+ wr32(E1000_VMOLR(vfn), vmolr);
+ igb_restore_vf_multicasts(adapter);
+}
+
+static void igb_check_wvbr(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 wvbr = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82576:
+ case e1000_i350:
+ if (!(wvbr = rd32(E1000_WVBR)))
+ return;
+ break;
+ default:
+ break;
+ }
+
+ adapter->wvbr |= wvbr;
+}
+
+#define IGB_STAGGERED_QUEUE_OFFSET 8
+
+static void igb_spoof_check(struct igb_adapter *adapter)
+{
+ int j;
+
+ if (!adapter->wvbr)
+ return;
+
+ for(j = 0; j < adapter->vfs_allocated_count; j++) {
+ if (adapter->wvbr & (1 << j) ||
+ adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
+ dev_warn(&adapter->pdev->dev,
+ "Spoof event(s) detected on VF %d\n", j);
+ adapter->wvbr &=
+ ~((1 << j) |
+ (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
+ }
+ }
+}
+
+/* Need to wait a few seconds after link up to get diagnostic information from
+ * the phy */
+static void igb_update_phy_info(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *) data;
+ igb_get_phy_info(&adapter->hw);
+}
+
+/**
+ * igb_has_link - check shared code for link and determine up/down
+ * @adapter: pointer to driver private info
+ **/
+bool igb_has_link(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ bool link_active = false;
+ s32 ret_val = 0;
+
+ /* get_link_status is set on LSC (link status) interrupt or
+ * rx sequence error interrupt. get_link_status will stay
+ * false until the e1000_check_for_link establishes link
+ * for copper adapters ONLY
+ */
+ switch (hw->phy.media_type) {
+ case e1000_media_type_copper:
+ if (hw->mac.get_link_status) {
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+ } else {
+ link_active = true;
+ }
+ break;
+ case e1000_media_type_internal_serdes:
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = hw->mac.serdes_has_link;
+ break;
+ default:
+ case e1000_media_type_unknown:
+ break;
+ }
+
+ return link_active;
+}
+
+static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
+{
+ bool ret = false;
+ u32 ctrl_ext, thstat;
+
+ /* check for thermal sensor event on i350, copper only */
+ if (hw->mac.type == e1000_i350) {
+ thstat = rd32(E1000_THSTAT);
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+
+ if ((hw->phy.media_type == e1000_media_type_copper) &&
+ !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
+ ret = !!(thstat & event);
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * igb_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igb_watchdog(unsigned long data)
+{
+ struct igb_adapter *adapter = (struct igb_adapter *)data;
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igb_watchdog_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter = container_of(work,
+ struct igb_adapter,
+ watchdog_task);
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ u32 link;
+ int i;
+
+ link = igb_has_link(adapter);
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ u32 ctrl;
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+
+ ctrl = rd32(E1000_CTRL);
+ /* Links status message must follow this format */
+ printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ netdev->name,
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) &&
+ (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+ ((ctrl & E1000_CTRL_RFCE) ? "RX" :
+ ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
+ printk(KERN_INFO "igb: %s The network adapter "
+ "link speed was downshifted "
+ "because it overheated.\n",
+ netdev->name);
+ }
+
+ /* adjust timeout factor according to speed/duplex */
+ adapter->tx_timeout_factor = 1;
+ switch (adapter->link_speed) {
+ case SPEED_10:
+ adapter->tx_timeout_factor = 14;
+ break;
+ case SPEED_100:
+ /* maybe add some timeout factor ? */
+ break;
+ }
+
+ netif_carrier_on(netdev);
+
+ igb_ping_all_vfs(adapter);
+ igb_check_vf_rate_limit(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* check for thermal sensor event */
+ if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
+ printk(KERN_ERR "igb: %s The network adapter "
+ "was stopped because it "
+ "overheated.\n",
+ netdev->name);
+ }
+
+ /* Links status message must follow this format */
+ printk(KERN_INFO "igb: %s NIC Link is Down\n",
+ netdev->name);
+ netif_carrier_off(netdev);
+
+ igb_ping_all_vfs(adapter);
+
+ /* link state has changed, schedule phy info update */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->phy_info_timer,
+ round_jiffies(jiffies + 2 * HZ));
+ }
+ }
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ spin_unlock(&adapter->stats64_lock);
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *tx_ring = adapter->tx_ring[i];
+ if (!netif_carrier_ok(netdev)) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ tx_ring->detect_tx_hung = true;
+ }
+
+ /* Cause software interrupt to ensure rx ring is cleaned */
+ if (adapter->msix_entries) {
+ u32 eics = 0;
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ eics |= q_vector->eims_value;
+ }
+ wr32(E1000_EICS, eics);
+ } else {
+ wr32(E1000_ICS, E1000_ICS_RXDMT0);
+ }
+
+ igb_spoof_check(adapter);
+
+ /* Reset the timer */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 2 * HZ));
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * igb_update_ring_itr - update the dynamic ITR value based on packet size
+ *
+ * Stores a new ITR value based on strictly on packet size. This
+ * algorithm is less sophisticated than that used in igb_update_itr,
+ * due to the difficulty of synchronizing statistics across multiple
+ * receive rings. The divisors and thresholds used by this function
+ * were determined based on theoretical maximum wire speed and testing
+ * data, in order to minimize response time while increasing bulk
+ * throughput.
+ * This functionality is controlled by the InterruptThrottleRate module
+ * parameter (see igb_param.c)
+ * NOTE: This function is called only when operating in a multiqueue
+ * receive environment.
+ * @q_vector: pointer to q_vector
+ **/
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
+{
+ int new_val = q_vector->itr_val;
+ int avg_wire_size = 0;
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct igb_ring *ring;
+ unsigned int packets;
+
+ /* For non-gigabit speeds, just fix the interrupt rate at 4000
+ * ints/sec - ITR timer value of 120 ticks.
+ */
+ if (adapter->link_speed != SPEED_1000) {
+ new_val = 976;
+ goto set_itr_val;
+ }
+
+ ring = q_vector->rx_ring;
+ if (ring) {
+ packets = ACCESS_ONCE(ring->total_packets);
+
+ if (packets)
+ avg_wire_size = ring->total_bytes / packets;
+ }
+
+ ring = q_vector->tx_ring;
+ if (ring) {
+ packets = ACCESS_ONCE(ring->total_packets);
+
+ if (packets)
+ avg_wire_size = max_t(u32, avg_wire_size,
+ ring->total_bytes / packets);
+ }
+
+ /* if avg_wire_size isn't set no work was done */
+ if (!avg_wire_size)
+ goto clear_counts;
+
+ /* Add 24 bytes to size to account for CRC, preamble, and gap */
+ avg_wire_size += 24;
+
+ /* Don't starve jumbo frames */
+ avg_wire_size = min(avg_wire_size, 3000);
+
+ /* Give a little boost to mid-size frames */
+ if ((avg_wire_size > 300) && (avg_wire_size < 1200))
+ new_val = avg_wire_size / 3;
+ else
+ new_val = avg_wire_size / 2;
+
+ /* when in itr mode 3 do not exceed 20K ints/sec */
+ if (adapter->rx_itr_setting == 3 && new_val < 196)
+ new_val = 196;
+
+set_itr_val:
+ if (new_val != q_vector->itr_val) {
+ q_vector->itr_val = new_val;
+ q_vector->set_itr = 1;
+ }
+clear_counts:
+ if (q_vector->rx_ring) {
+ q_vector->rx_ring->total_bytes = 0;
+ q_vector->rx_ring->total_packets = 0;
+ }
+ if (q_vector->tx_ring) {
+ q_vector->tx_ring->total_bytes = 0;
+ q_vector->tx_ring->total_packets = 0;
+ }
+}
+
+/**
+ * igb_update_itr - update the dynamic ITR value based on statistics
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see igb_param.c)
+ * NOTE: These calculations are only valid when operating in a single-
+ * queue environment.
+ * @adapter: pointer to adapter
+ * @itr_setting: current q_vector->itr_val
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ **/
+static unsigned int igb_update_itr(struct igb_adapter *adapter, u16 itr_setting,
+ int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000) {
+ retval = bulk_latency;
+ } else if ((packets < 10) || ((bytes/packets) > 1200)) {
+ retval = bulk_latency;
+ } else if ((packets > 35)) {
+ retval = lowest_latency;
+ }
+ } else if (bytes/packets > 2000) {
+ retval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ retval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 1500) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void igb_set_itr(struct igb_adapter *adapter)
+{
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ u16 current_itr;
+ u32 new_itr = q_vector->itr_val;
+
+ /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
+ if (adapter->link_speed != SPEED_1000) {
+ current_itr = 0;
+ new_itr = 4000;
+ goto set_itr_now;
+ }
+
+ adapter->rx_itr = igb_update_itr(adapter,
+ adapter->rx_itr,
+ q_vector->rx_ring->total_packets,
+ q_vector->rx_ring->total_bytes);
+
+ adapter->tx_itr = igb_update_itr(adapter,
+ adapter->tx_itr,
+ q_vector->tx_ring->total_packets,
+ q_vector->tx_ring->total_bytes);
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
+ current_itr = low_latency;
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 56; /* aka 70,000 ints/sec */
+ break;
+ case low_latency:
+ new_itr = 196; /* aka 20,000 ints/sec */
+ break;
+ case bulk_latency:
+ new_itr = 980; /* aka 4,000 ints/sec */
+ break;
+ default:
+ break;
+ }
+
+set_itr_now:
+ q_vector->rx_ring->total_bytes = 0;
+ q_vector->rx_ring->total_packets = 0;
+ q_vector->tx_ring->total_bytes = 0;
+ q_vector->tx_ring->total_packets = 0;
+
+ if (new_itr != q_vector->itr_val) {
+ /* this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing */
+ new_itr = new_itr > q_vector->itr_val ?
+ max((new_itr * q_vector->itr_val) /
+ (new_itr + (q_vector->itr_val >> 2)),
+ new_itr) :
+ new_itr;
+ /* Don't write the value here; it resets the adapter's
+ * internal timer, and causes us to delay far longer than
+ * we should between interrupts. Instead, we write the ITR
+ * value at the beginning of the next interrupt so the timing
+ * ends up being correct.
+ */
+ q_vector->itr_val = new_itr;
+ q_vector->set_itr = 1;
+ }
+}
+
+#define IGB_TX_FLAGS_CSUM 0x00000001
+#define IGB_TX_FLAGS_VLAN 0x00000002
+#define IGB_TX_FLAGS_TSO 0x00000004
+#define IGB_TX_FLAGS_IPV4 0x00000008
+#define IGB_TX_FLAGS_TSTAMP 0x00000010
+#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT 16
+
+static inline int igb_tso_adv(struct igb_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ int err;
+ struct igb_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+ u32 mss_l4len_idx;
+ u8 l4len;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ l4len = tcp_hdrlen(skb);
+ *hdr_len += l4len;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
+ /* VLAN MACLEN IPLEN */
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ *hdr_len += skb_network_offset(skb);
+ info |= skb_network_header_len(skb);
+ *hdr_len += skb_network_header_len(skb);
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
+ mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
+
+ /* For 82575, context index must be unique per ring. */
+ if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
+ mss_l4len_idx |= tx_ring->reg_idx << 4;
+
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+ context_desc->seqnum_seed = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+static inline bool igb_tx_csum_adv(struct igb_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ struct device *dev = tx_ring->dev;
+ struct igb_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+ unsigned int i;
+
+ if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
+ (tx_flags & IGB_TX_FLAGS_VLAN)) {
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ info |= skb_network_header_len(skb);
+
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ __be16 protocol;
+
+ if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
+ const struct vlan_ethhdr *vhdr =
+ (const struct vlan_ethhdr*)skb->data;
+
+ protocol = vhdr->h_vlan_encapsulated_proto;
+ } else {
+ protocol = skb->protocol;
+ }
+
+ switch (protocol) {
+ case cpu_to_be16(ETH_P_IP):
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+ break;
+ case cpu_to_be16(ETH_P_IPV6):
+ /* XXX what about other V6 headers?? */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
+ break;
+ default:
+ if (unlikely(net_ratelimit()))
+ dev_warn(dev,
+ "partial checksum but proto=%x!\n",
+ skb->protocol);
+ break;
+ }
+ }
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+ context_desc->seqnum_seed = 0;
+ if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
+ context_desc->mss_l4len_idx =
+ cpu_to_le32(tx_ring->reg_idx << 4);
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+ return false;
+}
+
+#define IGB_MAX_TXD_PWR 16
+#define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
+
+static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
+ unsigned int first)
+{
+ struct igb_buffer *buffer_info;
+ struct device *dev = tx_ring->dev;
+ unsigned int hlen = skb_headlen(skb);
+ unsigned int count = 0, i;
+ unsigned int f;
+ u16 gso_segs = skb_shinfo(skb)->gso_segs ?: 1;
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(hlen >= IGB_MAX_DATA_PER_TXD);
+ buffer_info->length = hlen;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = dma_map_single(dev, skb->data, hlen,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, buffer_info->dma))
+ goto dma_error;
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
+ struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[f];
+ unsigned int len = frag->size;
+
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = dma_map_page(dev,
+ frag->page,
+ frag->page_offset,
+ len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, buffer_info->dma))
+ goto dma_error;
+
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[i].tx_flags = skb_shinfo(skb)->tx_flags;
+ /* multiply data chunks by size of headers */
+ tx_ring->buffer_info[i].bytecount = ((gso_segs - 1) * hlen) + skb->len;
+ tx_ring->buffer_info[i].gso_segs = gso_segs;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return ++count;
+
+dma_error:
+ dev_err(dev, "TX DMA map failed\n");
+
+ /* clear timestamp and dma mappings for failed buffer_info mapping */
+ buffer_info->dma = 0;
+ buffer_info->time_stamp = 0;
+ buffer_info->length = 0;
+ buffer_info->next_to_watch = 0;
+ buffer_info->mapped_as_page = false;
+
+ /* clear timestamp and dma mappings for remaining portion of packet */
+ while (count--) {
+ if (i == 0)
+ i = tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ }
+
+ return 0;
+}
+
+static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
+ u32 tx_flags, int count, u32 paylen,
+ u8 hdr_len)
+{
+ union e1000_adv_tx_desc *tx_desc;
+ struct igb_buffer *buffer_info;
+ u32 olinfo_status = 0, cmd_type_len;
+ unsigned int i = tx_ring->next_to_use;
+
+ cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
+ E1000_ADVTXD_DCMD_DEXT);
+
+ if (tx_flags & IGB_TX_FLAGS_VLAN)
+ cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IGB_TX_FLAGS_TSTAMP)
+ cmd_type_len |= E1000_ADVTXD_MAC_TSTAMP;
+
+ if (tx_flags & IGB_TX_FLAGS_TSO) {
+ cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
+
+ /* insert tcp checksum */
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+
+ /* insert ip checksum */
+ if (tx_flags & IGB_TX_FLAGS_IPV4)
+ olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
+
+ } else if (tx_flags & IGB_TX_FLAGS_CSUM) {
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ if ((tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX) &&
+ (tx_flags & (IGB_TX_FLAGS_CSUM |
+ IGB_TX_FLAGS_TSO |
+ IGB_TX_FLAGS_VLAN)))
+ olinfo_status |= tx_ring->reg_idx << 4;
+
+ olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
+
+ do {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ count--;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ } while (count > 0);
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, tx_ring->tail);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
+{
+ struct net_device *netdev = tx_ring->netdev;
+
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (igb_desc_unused(tx_ring) < size)
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp2);
+ tx_ring->tx_stats.restart_queue2++;
+ u64_stats_update_end(&tx_ring->tx_syncp2);
+
+ return 0;
+}
+
+static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
+{
+ if (igb_desc_unused(tx_ring) >= size)
+ return 0;
+ return __igb_maybe_stop_tx(tx_ring, size);
+}
+
+netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct igb_ring *tx_ring)
+{
+ int tso = 0, count;
+ u32 tx_flags = 0;
+ u16 first;
+ u8 hdr_len = 0;
+
+ /* need: 1 descriptor per page,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for skb->data,
+ * + 1 desc for context descriptor,
+ * otherwise try next time */
+ if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
+ skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
+ tx_flags |= IGB_TX_FLAGS_TSTAMP;
+ }
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= IGB_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= IGB_TX_FLAGS_IPV4;
+
+ first = tx_ring->next_to_use;
+ if (skb_is_gso(skb)) {
+ tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
+
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+ }
+
+ if (tso)
+ tx_flags |= IGB_TX_FLAGS_TSO;
+ else if (igb_tx_csum_adv(tx_ring, skb, tx_flags) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL))
+ tx_flags |= IGB_TX_FLAGS_CSUM;
+
+ /*
+ * count reflects descriptors mapped, if 0 or less then mapping error
+ * has occurred and we need to rewind the descriptor queue
+ */
+ count = igb_tx_map_adv(tx_ring, skb, first);
+ if (!count) {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ return NETDEV_TX_OK;
+ }
+
+ igb_tx_queue_adv(tx_ring, tx_flags, count, skb->len, hdr_len);
+
+ /* Make sure there is space in the ring for the next send. */
+ igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
+
+ return NETDEV_TX_OK;
+}
+
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct igb_ring *tx_ring;
+ int r_idx = 0;
+
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ r_idx = skb->queue_mapping & (IGB_ABS_MAX_TX_QUEUES - 1);
+ tx_ring = adapter->multi_tx_table[r_idx];
+
+ /* This goes back to the question of how to logically map a tx queue
+ * to a flow. Right now, performance is impacted slightly negatively
+ * if using multiple tx queues. If the stack breaks away from a
+ * single qdisc implementation, we can look at this again. */
+ return igb_xmit_frame_ring_adv(skb, tx_ring);
+}
+
+/**
+ * igb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igb_tx_timeout(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+
+ if (hw->mac.type == e1000_82580)
+ hw->dev_spec._82575.global_device_reset = true;
+
+ schedule_work(&adapter->reset_task);
+ wr32(E1000_EICS,
+ (adapter->eims_enable_mask & ~adapter->eims_other));
+}
+
+static void igb_reset_task(struct work_struct *work)
+{
+ struct igb_adapter *adapter;
+ adapter = container_of(work, struct igb_adapter, reset_task);
+
+ igb_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ igb_reinit_locked(adapter);
+}
+
+/**
+ * igb_get_stats64 - Get System Network Statistics
+ * @netdev: network interface device structure
+ * @stats: rtnl_link_stats64 pointer
+ *
+ **/
+static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ spin_lock(&adapter->stats64_lock);
+ igb_update_stats(adapter, &adapter->stats64);
+ memcpy(stats, &adapter->stats64, sizeof(*stats));
+ spin_unlock(&adapter->stats64_lock);
+
+ return stats;
+}
+
+/**
+ * igb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+ u32 rx_buffer_len, i;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
+ msleep(1);
+
+ /* igb_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+
+ /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ */
+
+ if (adapter->hw.mac.type == e1000_82580)
+ max_frame += IGB_TS_HDR_LEN;
+
+ if (max_frame <= IGB_RXBUFFER_1024)
+ rx_buffer_len = IGB_RXBUFFER_1024;
+ else if (max_frame <= MAXIMUM_ETHERNET_VLAN_SIZE)
+ rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ else
+ rx_buffer_len = IGB_RXBUFFER_128;
+
+ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN + IGB_TS_HDR_LEN) ||
+ (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN))
+ rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN;
+
+ if ((adapter->hw.mac.type == e1000_82580) &&
+ (rx_buffer_len == IGB_RXBUFFER_128))
+ rx_buffer_len += IGB_RXBUFFER_64;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+
+ dev_info(&pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->rx_buffer_len = rx_buffer_len;
+
+ if (netif_running(netdev))
+ igb_up(adapter);
+ else
+ igb_reset(adapter);
+
+ clear_bit(__IGB_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * igb_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+ **/
+
+void igb_update_stats(struct igb_adapter *adapter,
+ struct rtnl_link_stats64 *net_stats)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ u32 reg, mpc;
+ u16 phy_tmp;
+ int i;
+ u64 bytes, packets;
+ unsigned int start;
+ u64 _bytes, _packets;
+
+#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
+
+ /*
+ * Prevent stats update while adapter is being reset, or if the pci
+ * connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+ if (pci_channel_offline(pdev))
+ return;
+
+ bytes = 0;
+ packets = 0;
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+ struct igb_ring *ring = adapter->rx_ring[i];
+
+ ring->rx_stats.drops += rqdpc_tmp;
+ net_stats->rx_fifo_errors += rqdpc_tmp;
+
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
+ _bytes = ring->rx_stats.bytes;
+ _packets = ring->rx_stats.packets;
+ } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+
+ net_stats->rx_bytes = bytes;
+ net_stats->rx_packets = packets;
+
+ bytes = 0;
+ packets = 0;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct igb_ring *ring = adapter->tx_ring[i];
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
+ _bytes = ring->tx_stats.bytes;
+ _packets = ring->tx_stats.packets;
+ } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
+ bytes += _bytes;
+ packets += _packets;
+ }
+ net_stats->tx_bytes = bytes;
+ net_stats->tx_packets = packets;
+
+ /* read stats registers */
+ adapter->stats.crcerrs += rd32(E1000_CRCERRS);
+ adapter->stats.gprc += rd32(E1000_GPRC);
+ adapter->stats.gorc += rd32(E1000_GORCL);
+ rd32(E1000_GORCH); /* clear GORCL */
+ adapter->stats.bprc += rd32(E1000_BPRC);
+ adapter->stats.mprc += rd32(E1000_MPRC);
+ adapter->stats.roc += rd32(E1000_ROC);
+
+ adapter->stats.prc64 += rd32(E1000_PRC64);
+ adapter->stats.prc127 += rd32(E1000_PRC127);
+ adapter->stats.prc255 += rd32(E1000_PRC255);
+ adapter->stats.prc511 += rd32(E1000_PRC511);
+ adapter->stats.prc1023 += rd32(E1000_PRC1023);
+ adapter->stats.prc1522 += rd32(E1000_PRC1522);
+ adapter->stats.symerrs += rd32(E1000_SYMERRS);
+ adapter->stats.sec += rd32(E1000_SEC);
+
+ mpc = rd32(E1000_MPC);
+ adapter->stats.mpc += mpc;
+ net_stats->rx_fifo_errors += mpc;
+ adapter->stats.scc += rd32(E1000_SCC);
+ adapter->stats.ecol += rd32(E1000_ECOL);
+ adapter->stats.mcc += rd32(E1000_MCC);
+ adapter->stats.latecol += rd32(E1000_LATECOL);
+ adapter->stats.dc += rd32(E1000_DC);
+ adapter->stats.rlec += rd32(E1000_RLEC);
+ adapter->stats.xonrxc += rd32(E1000_XONRXC);
+ adapter->stats.xontxc += rd32(E1000_XONTXC);
+ adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
+ adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
+ adapter->stats.fcruc += rd32(E1000_FCRUC);
+ adapter->stats.gptc += rd32(E1000_GPTC);
+ adapter->stats.gotc += rd32(E1000_GOTCL);
+ rd32(E1000_GOTCH); /* clear GOTCL */
+ adapter->stats.rnbc += rd32(E1000_RNBC);
+ adapter->stats.ruc += rd32(E1000_RUC);
+ adapter->stats.rfc += rd32(E1000_RFC);
+ adapter->stats.rjc += rd32(E1000_RJC);
+ adapter->stats.tor += rd32(E1000_TORH);
+ adapter->stats.tot += rd32(E1000_TOTH);
+ adapter->stats.tpr += rd32(E1000_TPR);
+
+ adapter->stats.ptc64 += rd32(E1000_PTC64);
+ adapter->stats.ptc127 += rd32(E1000_PTC127);
+ adapter->stats.ptc255 += rd32(E1000_PTC255);
+ adapter->stats.ptc511 += rd32(E1000_PTC511);
+ adapter->stats.ptc1023 += rd32(E1000_PTC1023);
+ adapter->stats.ptc1522 += rd32(E1000_PTC1522);
+
+ adapter->stats.mptc += rd32(E1000_MPTC);
+ adapter->stats.bptc += rd32(E1000_BPTC);
+
+ adapter->stats.tpt += rd32(E1000_TPT);
+ adapter->stats.colc += rd32(E1000_COLC);
+
+ adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
+ /* read internal phy specific stats */
+ reg = rd32(E1000_CTRL_EXT);
+ if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
+ adapter->stats.rxerrc += rd32(E1000_RXERRC);
+ adapter->stats.tncrs += rd32(E1000_TNCRS);
+ }
+
+ adapter->stats.tsctc += rd32(E1000_TSCTC);
+ adapter->stats.tsctfc += rd32(E1000_TSCTFC);
+
+ adapter->stats.iac += rd32(E1000_IAC);
+ adapter->stats.icrxoc += rd32(E1000_ICRXOC);
+ adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
+ adapter->stats.icrxatc += rd32(E1000_ICRXATC);
+ adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
+ adapter->stats.ictxatc += rd32(E1000_ICTXATC);
+ adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
+ adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
+ adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
+
+ /* Fill out the OS statistics structure */
+ net_stats->multicast = adapter->stats.mprc;
+ net_stats->collisions = adapter->stats.colc;
+
+ /* Rx Errors */
+
+ /* RLEC on some newer hardware can be incorrect so build
+ * our own version based on RUC and ROC */
+ net_stats->rx_errors = adapter->stats.rxerrc +
+ adapter->stats.crcerrs + adapter->stats.algnerrc +
+ adapter->stats.ruc + adapter->stats.roc +
+ adapter->stats.cexterr;
+ net_stats->rx_length_errors = adapter->stats.ruc +
+ adapter->stats.roc;
+ net_stats->rx_crc_errors = adapter->stats.crcerrs;
+ net_stats->rx_frame_errors = adapter->stats.algnerrc;
+ net_stats->rx_missed_errors = adapter->stats.mpc;
+
+ /* Tx Errors */
+ net_stats->tx_errors = adapter->stats.ecol +
+ adapter->stats.latecol;
+ net_stats->tx_aborted_errors = adapter->stats.ecol;
+ net_stats->tx_window_errors = adapter->stats.latecol;
+ net_stats->tx_carrier_errors = adapter->stats.tncrs;
+
+ /* Tx Dropped needs to be maintained elsewhere */
+
+ /* Phy Stats */
+ if (hw->phy.media_type == e1000_media_type_copper) {
+ if ((adapter->link_speed == SPEED_1000) &&
+ (!igb_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
+ phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
+ adapter->phy_stats.idle_errors += phy_tmp;
+ }
+ }
+
+ /* Management Stats */
+ adapter->stats.mgptc += rd32(E1000_MGTPTC);
+ adapter->stats.mgprc += rd32(E1000_MGTPRC);
+ adapter->stats.mgpdc += rd32(E1000_MGTPDC);
+
+ /* OS2BMC Stats */
+ reg = rd32(E1000_MANC);
+ if (reg & E1000_MANC_EN_BMC2OS) {
+ adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
+ adapter->stats.o2bspc += rd32(E1000_O2BSPC);
+ adapter->stats.b2ospc += rd32(E1000_B2OSPC);
+ adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
+ }
+}
+
+static irqreturn_t igb_msix_other(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 icr = rd32(E1000_ICR);
+ /* reading ICR causes bit 31 of EICR to be cleared */
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ /* The DMA Out of Sync is also indication of a spoof event
+ * in IOV mode. Check the Wrong VM Behavior register to
+ * see if it is really a spoof event. */
+ igb_check_wvbr(adapter);
+ }
+
+ /* Check for a mailbox event */
+ if (icr & E1000_ICR_VMMB)
+ igb_msg_task(adapter);
+
+ if (icr & E1000_ICR_LSC) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ if (adapter->vfs_allocated_count)
+ wr32(E1000_IMS, E1000_IMS_LSC |
+ E1000_IMS_VMMB |
+ E1000_IMS_DOUTSYNC);
+ else
+ wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
+ wr32(E1000_EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static void igb_write_itr(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ u32 itr_val = q_vector->itr_val & 0x7FFC;
+
+ if (!q_vector->set_itr)
+ return;
+
+ if (!itr_val)
+ itr_val = 0x4;
+
+ if (adapter->hw.mac.type == e1000_82575)
+ itr_val |= itr_val << 16;
+ else
+ itr_val |= 0x8000000;
+
+ writel(itr_val, q_vector->itr_register);
+ q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+ struct igb_q_vector *q_vector = data;
+
+ /* Write the ITR value calculated from the previous interrupt. */
+ igb_write_itr(q_vector);
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_IGB_DCA
+static void igb_update_dca(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int cpu = get_cpu();
+
+ if (q_vector->cpu == cpu)
+ goto out_no_update;
+
+ if (q_vector->tx_ring) {
+ int q = q_vector->tx_ring->reg_idx;
+ u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
+ if (hw->mac.type == e1000_82575) {
+ dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
+ dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ } else {
+ dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
+ dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+ E1000_DCA_TXCTRL_CPUID_SHIFT;
+ }
+ dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
+ wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
+ }
+ if (q_vector->rx_ring) {
+ int q = q_vector->rx_ring->reg_idx;
+ u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
+ if (hw->mac.type == e1000_82575) {
+ dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
+ dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ } else {
+ dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
+ dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+ E1000_DCA_RXCTRL_CPUID_SHIFT;
+ }
+ dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
+ dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
+ dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
+ wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
+ }
+ q_vector->cpu = cpu;
+out_no_update:
+ put_cpu();
+}
+
+static void igb_setup_dca(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
+ return;
+
+ /* Always use CB2 mode, difference is masked in the CB driver. */
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ adapter->q_vector[i]->cpu = -1;
+ igb_update_dca(adapter->q_vector[i]);
+ }
+}
+
+static int __igb_notify_dca(struct device *dev, void *data)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned long event = *(unsigned long *)data;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ /* if already enabled, don't do it again */
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED)
+ break;
+ if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IGB_FLAG_DCA_ENABLED;
+ dev_info(&pdev->dev, "DCA enabled\n");
+ igb_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
+ /* without this a class_device is left
+ * hanging around in the sysfs model */
+ dca_remove_requester(dev);
+ dev_info(&pdev->dev, "DCA disabled\n");
+ adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
+ wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
+ __igb_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+#endif /* CONFIG_IGB_DCA */
+
+static void igb_ping_all_vfs(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ping;
+ int i;
+
+ for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
+ ping = E1000_PF_CONTROL_MSG;
+ if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
+ ping |= E1000_VT_MSGTYPE_CTS;
+ igb_write_mbx(hw, &ping, 1, i);
+ }
+}
+
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vmolr = rd32(E1000_VMOLR(vf));
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+ vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
+ IGB_VF_FLAG_MULTI_PROMISC);
+ vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+ vmolr |= E1000_VMOLR_MPME;
+ vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
+ *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+ } else {
+ /*
+ * if we have hashes and we are clearing a multicast promisc
+ * flag we need to write the hashes to the MTA as this step
+ * was previously skipped
+ */
+ if (vf_data->num_vf_mc_hashes > 30) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ int j;
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ }
+
+ wr32(E1000_VMOLR(vf), vmolr);
+
+ /* there are flags left unprocessed, likely not supported */
+ if (*msgbuf & E1000_VT_MSGINFO_MASK)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+static int igb_set_vf_multicasts(struct igb_adapter *adapter,
+ u32 *msgbuf, u32 vf)
+{
+ int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ int i;
+
+ /* salt away the number of multicast addresses assigned
+ * to this VF for later use to restore when the PF multi cast
+ * list changes
+ */
+ vf_data->num_vf_mc_hashes = n;
+
+ /* only up to 30 hash values supported */
+ if (n > 30)
+ n = 30;
+
+ /* store the hashes for later use */
+ for (i = 0; i < n; i++)
+ vf_data->vf_mc_hashes[i] = hash_list[i];
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+
+ return 0;
+}
+
+static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data;
+ int i, j;
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ u32 vmolr = rd32(E1000_VMOLR(i));
+ vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+ vf_data = &adapter->vf_data[i];
+
+ if ((vf_data->num_vf_mc_hashes > 30) ||
+ (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+ vmolr |= E1000_VMOLR_MPME;
+ } else if (vf_data->num_vf_mc_hashes) {
+ vmolr |= E1000_VMOLR_ROMPE;
+ for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+ igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+ }
+ wr32(E1000_VMOLR(i), vmolr);
+ }
+}
+
+static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 pool_mask, reg, vid;
+ int i;
+
+ pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+
+ /* remove the vf from the pool */
+ reg &= ~pool_mask;
+
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
+ (reg & E1000_VLVF_VLANID_ENABLE)) {
+ reg = 0;
+ vid = reg & E1000_VLVF_VLANID_MASK;
+ igb_vfta_set(hw, vid, false);
+ }
+
+ wr32(E1000_VLVF(i), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled = 0;
+}
+
+static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg, i;
+
+ /* The vlvf table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return -1;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return -1;
+
+ /* Find the vlan filter for this id */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if ((reg & E1000_VLVF_VLANID_ENABLE) &&
+ vid == (reg & E1000_VLVF_VLANID_MASK))
+ break;
+ }
+
+ if (add) {
+ if (i == E1000_VLVF_ARRAY_SIZE) {
+ /* Did not find a matching VLAN ID entry that was
+ * enabled. Search for a free filter entry, i.e.
+ * one without the enable bit set
+ */
+ for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
+ reg = rd32(E1000_VLVF(i));
+ if (!(reg & E1000_VLVF_VLANID_ENABLE))
+ break;
+ }
+ }
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* Found an enabled/available entry */
+ reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
+
+ /* if !enabled we need to set this up in vfta */
+ if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ reg |= E1000_VLVF_VLANID_ENABLE;
+ }
+ reg &= ~E1000_VLVF_VLANID_MASK;
+ reg |= vid;
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size += 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+
+ adapter->vf_data[vf].vlans_enabled++;
+ return 0;
+ }
+ } else {
+ if (i < E1000_VLVF_ARRAY_SIZE) {
+ /* remove vf from the pool */
+ reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
+ /* if pool is empty then remove entry from vfta */
+ if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
+ reg = 0;
+ igb_vfta_set(hw, vid, false);
+ }
+ wr32(E1000_VLVF(i), reg);
+
+ /* do not modify RLPML for PF devices */
+ if (vf >= adapter->vfs_allocated_count)
+ return 0;
+
+ adapter->vf_data[vf].vlans_enabled--;
+ if (!adapter->vf_data[vf].vlans_enabled) {
+ u32 size;
+ reg = rd32(E1000_VMOLR(vf));
+ size = reg & E1000_VMOLR_RLPML_MASK;
+ size -= 4;
+ reg &= ~E1000_VMOLR_RLPML_MASK;
+ reg |= size;
+ wr32(E1000_VMOLR(vf), reg);
+ }
+ }
+ }
+ return 0;
+}
+
+static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (vid)
+ wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
+ else
+ wr32(E1000_VMVIR(vf), 0);
+}
+
+static int igb_ndo_set_vf_vlan(struct net_device *netdev,
+ int vf, u16 vlan, u8 qos)
+{
+ int err = 0;
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+ if (vlan || qos) {
+ err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
+ if (err)
+ goto out;
+ igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+ igb_set_vmolr(adapter, vf, !vlan);
+ adapter->vf_data[vf].pf_vlan = vlan;
+ adapter->vf_data[vf].pf_qos = qos;
+ dev_info(&adapter->pdev->dev,
+ "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF VLAN has been set,"
+ " but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before"
+ " attempting to use the VF device.\n");
+ }
+ } else {
+ igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
+ false, vf);
+ igb_set_vmvir(adapter, vlan, vf);
+ igb_set_vmolr(adapter, vf, true);
+ adapter->vf_data[vf].pf_vlan = 0;
+ adapter->vf_data[vf].pf_qos = 0;
+ }
+out:
+ return err;
+}
+
+static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+ int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
+ int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
+
+ return igb_vlvf_set(adapter, vid, add, vf);
+}
+
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
+{
+ /* clear flags - except flag that indicates PF has set the MAC */
+ adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
+ adapter->vf_data[vf].last_nack = jiffies;
+
+ /* reset offloads to defaults */
+ igb_set_vmolr(adapter, vf, true);
+
+ /* reset vlans for device */
+ igb_clear_vf_vfta(adapter, vf);
+ if (adapter->vf_data[vf].pf_vlan)
+ igb_ndo_set_vf_vlan(adapter->netdev, vf,
+ adapter->vf_data[vf].pf_vlan,
+ adapter->vf_data[vf].pf_qos);
+ else
+ igb_clear_vf_vfta(adapter, vf);
+
+ /* reset multicast table array for vf */
+ adapter->vf_data[vf].num_vf_mc_hashes = 0;
+
+ /* Flush and reset the mta with the new values */
+ igb_set_rx_mode(adapter->netdev);
+}
+
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+ /* generate a new mac address as we were hotplug removed/added */
+ if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
+ random_ether_addr(vf_mac);
+
+ /* process remaining reset events */
+ igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+ u32 reg, msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* process all the same items cleared in a function level reset */
+ igb_vf_reset(adapter, vf);
+
+ /* set vf mac address */
+ igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
+
+ /* enable transmit and receive for vf */
+ reg = rd32(E1000_VFTE);
+ wr32(E1000_VFTE, reg | (1 << vf));
+ reg = rd32(E1000_VFRE);
+ wr32(E1000_VFRE, reg | (1 << vf));
+
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
+
+ /* reply to reset with ack and vf mac address */
+ msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
+ memcpy(addr, vf_mac, 6);
+ igb_write_mbx(hw, msgbuf, 3, vf);
+}
+
+static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
+{
+ /*
+ * The VF MAC Address is stored in a packed array of bytes
+ * starting at the second 32 bit word of the msg array
+ */
+ unsigned char *addr = (char *)&msg[1];
+ int err = -1;
+
+ if (is_valid_ether_addr(addr))
+ err = igb_set_vf_mac(adapter, vf, addr);
+
+ return err;
+}
+
+static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ u32 msg = E1000_VT_MSGTYPE_NACK;
+
+ /* if device isn't clear to send it shouldn't be reading either */
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+ time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+ igb_write_mbx(hw, &msg, 1, vf);
+ vf_data->last_nack = jiffies;
+ }
+}
+
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ struct e1000_hw *hw = &adapter->hw;
+ struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+ s32 retval;
+
+ retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
+
+ if (retval) {
+ /* if receive failed revoke VF CTS stats and restart init */
+ dev_err(&pdev->dev, "Error receiving message from VF\n");
+ vf_data->flags &= ~IGB_VF_FLAG_CTS;
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ goto out;
+ }
+
+ /* this is a message we already processed, do nothing */
+ if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
+ return;
+
+ /*
+ * until the vf completes a reset it should not be
+ * allowed to start any configuration.
+ */
+
+ if (msgbuf[0] == E1000_VF_RESET) {
+ igb_vf_reset_msg(adapter, vf);
+ return;
+ }
+
+ if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+ if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
+ return;
+ retval = -1;
+ goto out;
+ }
+
+ switch ((msgbuf[0] & 0xFFFF)) {
+ case E1000_VF_SET_MAC_ADDR:
+ retval = -EINVAL;
+ if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
+ retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
+ else
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively "
+ "set MAC address\nReload the VF driver to "
+ "resume operations\n", vf);
+ break;
+ case E1000_VF_SET_PROMISC:
+ retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_MULTICAST:
+ retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
+ break;
+ case E1000_VF_SET_LPE:
+ retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
+ break;
+ case E1000_VF_SET_VLAN:
+ retval = -1;
+ if (vf_data->pf_vlan)
+ dev_warn(&pdev->dev,
+ "VF %d attempted to override administratively "
+ "set VLAN tag\nReload the VF driver to "
+ "resume operations\n", vf);
+ else
+ retval = igb_set_vf_vlan(adapter, msgbuf, vf);
+ break;
+ default:
+ dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+ retval = -1;
+ break;
+ }
+
+ msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
+out:
+ /* notify the VF of the results of what it sent us */
+ if (retval)
+ msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
+ else
+ msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
+
+ igb_write_mbx(hw, msgbuf, 1, vf);
+}
+
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 vf;
+
+ for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+ /* process any reset requests */
+ if (!igb_check_for_rst(hw, vf))
+ igb_vf_reset_event(adapter, vf);
+
+ /* process any messages pending */
+ if (!igb_check_for_msg(hw, vf))
+ igb_rcv_msg_from_vf(adapter, vf);
+
+ /* process any acks */
+ if (!igb_check_for_ack(hw, vf))
+ igb_rcv_ack_from_vf(adapter, vf);
+ }
+}
+
+/**
+ * igb_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!adapter->vfs_allocated_count)
+ return;
+
+ for (i = 0; i < hw->mac.uta_reg_count; i++)
+ array_wr32(E1000_UTA, i, ~0);
+}
+
+/**
+ * igb_intr_msi - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr_msi(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* read ICR disables interrupts using IAM */
+ u32 icr = rd32(E1000_ICR);
+
+ igb_write_itr(q_vector);
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * igb_intr - Legacy Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t igb_intr(int irq, void *data)
+{
+ struct igb_adapter *adapter = data;
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ struct e1000_hw *hw = &adapter->hw;
+ /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
+ * need for the IMC write */
+ u32 icr = rd32(E1000_ICR);
+ if (!icr)
+ return IRQ_NONE; /* Not our interrupt */
+
+ igb_write_itr(q_vector);
+
+ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
+ * not set, then the adapter didn't send an interrupt */
+ if (!(icr & E1000_ICR_INT_ASSERTED))
+ return IRQ_NONE;
+
+ if (icr & E1000_ICR_DRSTA)
+ schedule_work(&adapter->reset_task);
+
+ if (icr & E1000_ICR_DOUTSYNC) {
+ /* HW is reporting DMA is out of sync */
+ adapter->stats.doosync++;
+ }
+
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->mac.get_link_status = 1;
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+ }
+
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
+ (!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
+ if (!adapter->msix_entries)
+ igb_set_itr(adapter);
+ else
+ igb_update_ring_itr(q_vector);
+ }
+
+ if (!test_bit(__IGB_DOWN, &adapter->state)) {
+ if (adapter->msix_entries)
+ wr32(E1000_EIMS, q_vector->eims_value);
+ else
+ igb_irq_enable(adapter);
+ }
+}
+
+/**
+ * igb_poll - NAPI Rx polling callback
+ * @napi: napi polling structure
+ * @budget: count of how many packets we should handle
+ **/
+static int igb_poll(struct napi_struct *napi, int budget)
+{
+ struct igb_q_vector *q_vector = container_of(napi,
+ struct igb_q_vector,
+ napi);
+ int tx_clean_complete = 1, work_done = 0;
+
+#ifdef CONFIG_IGB_DCA
+ if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+ igb_update_dca(q_vector);
+#endif
+ if (q_vector->tx_ring)
+ tx_clean_complete = igb_clean_tx_irq(q_vector);
+
+ if (q_vector->rx_ring)
+ igb_clean_rx_irq_adv(q_vector, &work_done, budget);
+
+ if (!tx_clean_complete)
+ work_done = budget;
+
+ /* If not enough Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ igb_ring_irq_enable(q_vector);
+ }
+
+ return work_done;
+}
+
+/**
+ * igb_systim_to_hwtstamp - convert system time value to hw timestamp
+ * @adapter: board private structure
+ * @shhwtstamps: timestamp structure to update
+ * @regval: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions
+ */
+static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
+ struct skb_shared_hwtstamps *shhwtstamps,
+ u64 regval)
+{
+ u64 ns;
+
+ /*
+ * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
+ * 24 to match clock shift we setup earlier.
+ */
+ if (adapter->hw.mac.type == e1000_82580)
+ regval <<= IGB_82580_TSYNC_SHIFT;
+
+ ns = timecounter_cyc2time(&adapter->clock, regval);
+ timecompare_update(&adapter->compare, ns);
+ memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
+ shhwtstamps->hwtstamp = ns_to_ktime(ns);
+ shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
+}
+
+/**
+ * igb_tx_hwtstamp - utility function which checks for TX time stamp
+ * @q_vector: pointer to q_vector containing needed info
+ * @buffer: pointer to igb_buffer structure
+ *
+ * If we were asked to do hardware stamping and such a time stamp is
+ * available, then it must have been for this skb here because we only
+ * allow only one such packet into the queue.
+ */
+static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, struct igb_buffer *buffer_info)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ struct skb_shared_hwtstamps shhwtstamps;
+ u64 regval;
+
+ /* if skb does not support hw timestamp or TX stamp not valid exit */
+ if (likely(!(buffer_info->tx_flags & SKBTX_HW_TSTAMP)) ||
+ !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
+ return;
+
+ regval = rd32(E1000_TXSTMPL);
+ regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+ igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+ skb_tstamp_tx(buffer_info->skb, &shhwtstamps);
+}
+
+/**
+ * igb_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: pointer to q_vector containing needed info
+ * returns true if ring is completely cleaned
+ **/
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct igb_ring *tx_ring = q_vector->tx_ring;
+ struct net_device *netdev = tx_ring->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igb_buffer *buffer_info;
+ union e1000_adv_tx_desc *tx_desc, *eop_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i, eop, count = 0;
+ bool cleaned = false;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
+
+ while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ rmb(); /* read buffer_info after eop_desc status */
+ for (cleaned = false; !cleaned; count++) {
+ tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+
+ if (buffer_info->skb) {
+ total_bytes += buffer_info->bytecount;
+ /* gso_segs is currently only valid for tcp */
+ total_packets += buffer_info->gso_segs;
+ igb_tx_hwtstamp(q_vector, buffer_info);
+ }
+
+ igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+ tx_desc->wb.status = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(count &&
+ netif_carrier_ok(netdev) &&
+ igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
+ !(test_bit(__IGB_DOWN, &adapter->state))) {
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.restart_queue++;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ }
+ }
+
+ if (tx_ring->detect_tx_hung) {
+ /* Detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ tx_ring->detect_tx_hung = false;
+ if (tx_ring->buffer_info[i].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
+ (adapter->tx_timeout_factor * HZ)) &&
+ !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
+
+ /* detected Tx unit hang */
+ dev_err(tx_ring->dev,
+ "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " desc.status <%x>\n",
+ tx_ring->queue_index,
+ readl(tx_ring->head),
+ readl(tx_ring->tail),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->wb.status);
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+ }
+ }
+ tx_ring->total_bytes += total_bytes;
+ tx_ring->total_packets += total_packets;
+ u64_stats_update_begin(&tx_ring->tx_syncp);
+ tx_ring->tx_stats.bytes += total_bytes;
+ tx_ring->tx_stats.packets += total_packets;
+ u64_stats_update_end(&tx_ring->tx_syncp);
+ return count < tx_ring->count;
+}
+
+static inline void igb_rx_checksum_adv(struct igb_ring *ring,
+ u32 status_err, struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set or checksum is disabled through ethtool */
+ if (!(ring->flags & IGB_RING_FLAG_RX_CSUM) ||
+ (status_err & E1000_RXD_STAT_IXSM))
+ return;
+
+ /* TCP/UDP checksum error bit is set */
+ if (status_err &
+ (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+ /*
+ * work around errata with sctp packets where the TCPE aka
+ * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
+ * packets, (aka let the stack check the crc32c)
+ */
+ if ((skb->len == 60) &&
+ (ring->flags & IGB_RING_FLAG_RX_SCTP_CSUM)) {
+ u64_stats_update_begin(&ring->rx_syncp);
+ ring->rx_stats.csum_err++;
+ u64_stats_update_end(&ring->rx_syncp);
+ }
+ /* let the stack verify checksum errors */
+ return;
+ }
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ dev_dbg(ring->dev, "cksum success: bits %08X\n", status_err);
+}
+
+static void igb_rx_hwtstamp(struct igb_q_vector *q_vector, u32 staterr,
+ struct sk_buff *skb)
+{
+ struct igb_adapter *adapter = q_vector->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ u64 regval;
+
+ /*
+ * If this bit is set, then the RX registers contain the time stamp. No
+ * other packet will be time stamped until we read these registers, so
+ * read the registers to make them available again. Because only one
+ * packet can be time stamped at a time, we know that the register
+ * values must belong to this one here and therefore we don't need to
+ * compare any of the additional attributes stored for it.
+ *
+ * If nothing went wrong, then it should have a shared tx_flags that we
+ * can turn into a skb_shared_hwtstamps.
+ */
+ if (staterr & E1000_RXDADV_STAT_TSIP) {
+ u32 *stamp = (u32 *)skb->data;
+ regval = le32_to_cpu(*(stamp + 2));
+ regval |= (u64)le32_to_cpu(*(stamp + 3)) << 32;
+ skb_pull(skb, IGB_TS_HDR_LEN);
+ } else {
+ if(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+ return;
+
+ regval = rd32(E1000_RXSTMPL);
+ regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+ }
+
+ igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+}
+static inline u16 igb_get_hlen(struct igb_ring *rx_ring,
+ union e1000_adv_rx_desc *rx_desc)
+{
+ /* HW will not DMA in data larger than the given buffer, even if it
+ * parses the (NFS, of course) header to be larger. In that case, it
+ * fills the header buffer and spills the rest into the page.
+ */
+ u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+ if (hlen > rx_ring->rx_buffer_len)
+ hlen = rx_ring->rx_buffer_len;
+ return hlen;
+}
+
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
+ int *work_done, int budget)
+{
+ struct igb_ring *rx_ring = q_vector->rx_ring;
+ struct net_device *netdev = rx_ring->netdev;
+ struct device *dev = rx_ring->dev;
+ union e1000_adv_rx_desc *rx_desc , *next_rxd;
+ struct igb_buffer *buffer_info , *next_buffer;
+ struct sk_buff *skb;
+ bool cleaned = false;
+ int cleaned_count = 0;
+ int current_node = numa_node_id();
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i;
+ u32 staterr;
+ u16 length;
+
+ i = rx_ring->next_to_clean;
+ buffer_info = &rx_ring->buffer_info[i];
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ if (*work_done >= budget)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ skb = buffer_info->skb;
+ prefetch(skb->data - NET_IP_ALIGN);
+ buffer_info->skb = NULL;
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+
+ next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
+ prefetch(next_rxd);
+ next_buffer = &rx_ring->buffer_info[i];
+
+ length = le16_to_cpu(rx_desc->wb.upper.length);
+ cleaned = true;
+ cleaned_count++;
+
+ if (buffer_info->dma) {
+ dma_unmap_single(dev, buffer_info->dma,
+ rx_ring->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ if (rx_ring->rx_buffer_len >= IGB_RXBUFFER_1024) {
+ skb_put(skb, length);
+ goto send_up;
+ }
+ skb_put(skb, igb_get_hlen(rx_ring, rx_desc));
+ }
+
+ if (length) {
+ dma_unmap_page(dev, buffer_info->page_dma,
+ PAGE_SIZE / 2, DMA_FROM_DEVICE);
+ buffer_info->page_dma = 0;
+
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ buffer_info->page,
+ buffer_info->page_offset,
+ length);
+
+ if ((page_count(buffer_info->page) != 1) ||
+ (page_to_nid(buffer_info->page) != current_node))
+ buffer_info->page = NULL;
+ else
+ get_page(buffer_info->page);
+
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ }
+
+ if (!(staterr & E1000_RXD_STAT_EOP)) {
+ buffer_info->skb = next_buffer->skb;
+ buffer_info->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ goto next_desc;
+ }
+send_up:
+ if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ if (staterr & (E1000_RXDADV_STAT_TSIP | E1000_RXDADV_STAT_TS))
+ igb_rx_hwtstamp(q_vector, staterr, skb);
+ total_bytes += skb->len;
+ total_packets++;
+
+ igb_rx_checksum_adv(rx_ring, staterr, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+
+ if (staterr & E1000_RXD_STAT_VP) {
+ u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ __vlan_hwaccel_put_tag(skb, vid);
+ }
+ napi_gro_receive(&q_vector->napi, skb);
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
+ igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ rx_ring->next_to_clean = i;
+ cleaned_count = igb_desc_unused(rx_ring);
+
+ if (cleaned_count)
+ igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
+
+ rx_ring->total_packets += total_packets;
+ rx_ring->total_bytes += total_bytes;
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.packets += total_packets;
+ rx_ring->rx_stats.bytes += total_bytes;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ return cleaned;
+}
+
+/**
+ * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count)
+{
+ struct net_device *netdev = rx_ring->netdev;
+ union e1000_adv_rx_desc *rx_desc;
+ struct igb_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ int bufsz;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ bufsz = rx_ring->rx_buffer_len;
+
+ while (cleaned_count--) {
+ rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
+
+ if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
+ if (!buffer_info->page) {
+ buffer_info->page = netdev_alloc_page(netdev);
+ if (unlikely(!buffer_info->page)) {
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.alloc_failed++;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ goto no_buffers;
+ }
+ buffer_info->page_offset = 0;
+ } else {
+ buffer_info->page_offset ^= PAGE_SIZE / 2;
+ }
+ buffer_info->page_dma =
+ dma_map_page(rx_ring->dev, buffer_info->page,
+ buffer_info->page_offset,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev,
+ buffer_info->page_dma)) {
+ buffer_info->page_dma = 0;
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.alloc_failed++;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ goto no_buffers;
+ }
+ }
+
+ skb = buffer_info->skb;
+ if (!skb) {
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (unlikely(!skb)) {
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.alloc_failed++;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ goto no_buffers;
+ }
+
+ buffer_info->skb = skb;
+ }
+ if (!buffer_info->dma) {
+ buffer_info->dma = dma_map_single(rx_ring->dev,
+ skb->data,
+ bufsz,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev,
+ buffer_info->dma)) {
+ buffer_info->dma = 0;
+ u64_stats_update_begin(&rx_ring->rx_syncp);
+ rx_ring->rx_stats.alloc_failed++;
+ u64_stats_update_end(&rx_ring->rx_syncp);
+ goto no_buffers;
+ }
+ }
+ /* Refresh the desc even if buffer_addrs didn't change because
+ * each write-back erases this info. */
+ if (bufsz < IGB_RXBUFFER_1024) {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
+ } else {
+ rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ if (i == 0)
+ i = (rx_ring->count - 1);
+ else
+ i--;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, rx_ring->tail);
+ }
+}
+
+/**
+ * igb_mii_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct mii_ioctl_data *data = if_mii(ifr);
+
+ if (adapter->hw.phy.media_type != e1000_media_type_copper)
+ return -EOPNOTSUPP;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = adapter->hw.phy.addr;
+ break;
+ case SIOCGMIIREG:
+ if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
+ &data->val_out))
+ return -EIO;
+ break;
+ case SIOCSMIIREG:
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * igb_hwtstamp_ioctl - control hardware time stamping
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ *
+ * Outgoing time stamping can be enabled and disabled. Play nice and
+ * disable it when requested, although it shouldn't case any overhead
+ * when no packet needs it. At most one packet in the queue may be
+ * marked for time stamping, otherwise it would be impossible to tell
+ * for sure to which packet the hardware time stamp belongs.
+ *
+ * Incoming time stamping has to be configured via the hardware
+ * filters. Not all combinations are supported, in particular event
+ * type has to be specified. Matching the kind of event packet is
+ * not supported, with the exception of "all V2 events regardless of
+ * level 2 or 4".
+ *
+ **/
+static int igb_hwtstamp_ioctl(struct net_device *netdev,
+ struct ifreq *ifr, int cmd)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct hwtstamp_config config;
+ u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+ u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ u32 tsync_rx_cfg = 0;
+ bool is_l4 = false;
+ bool is_l2 = false;
+ u32 regval;
+
+ if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
+ return -EFAULT;
+
+ /* reserved for future extensions */
+ if (config.flags)
+ return -EINVAL;
+
+ switch (config.tx_type) {
+ case HWTSTAMP_TX_OFF:
+ tsync_tx_ctl = 0;
+ case HWTSTAMP_TX_ON:
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ switch (config.rx_filter) {
+ case HWTSTAMP_FILTER_NONE:
+ tsync_rx_ctl = 0;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
+ case HWTSTAMP_FILTER_ALL:
+ /*
+ * register TSYNCRXCFG must be set, therefore it is not
+ * possible to time stamp both Sync and Delay_Req messages
+ * => fall back to time stamping all packets
+ */
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ config.rx_filter = HWTSTAMP_FILTER_ALL;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
+ is_l4 = true;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
+ is_l2 = true;
+ is_l4 = true;
+ config.rx_filter = HWTSTAMP_FILTER_SOME;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
+ case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+ tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
+ is_l2 = true;
+ is_l4 = true;
+ config.rx_filter = HWTSTAMP_FILTER_SOME;
+ break;
+ case HWTSTAMP_FILTER_PTP_V2_EVENT:
+ case HWTSTAMP_FILTER_PTP_V2_SYNC:
+ case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+ config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
+ is_l2 = true;
+ break;
+ default:
+ return -ERANGE;
+ }
+
+ if (hw->mac.type == e1000_82575) {
+ if (tsync_rx_ctl | tsync_tx_ctl)
+ return -EINVAL;
+ return 0;
+ }
+
+ /*
+ * Per-packet timestamping only works if all packets are
+ * timestamped, so enable timestamping in all packets as
+ * long as one rx filter was configured.
+ */
+ if ((hw->mac.type == e1000_82580) && tsync_rx_ctl) {
+ tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
+ tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
+ }
+
+ /* enable/disable TX */
+ regval = rd32(E1000_TSYNCTXCTL);
+ regval &= ~E1000_TSYNCTXCTL_ENABLED;
+ regval |= tsync_tx_ctl;
+ wr32(E1000_TSYNCTXCTL, regval);
+
+ /* enable/disable RX */
+ regval = rd32(E1000_TSYNCRXCTL);
+ regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+ regval |= tsync_rx_ctl;
+ wr32(E1000_TSYNCRXCTL, regval);
+
+ /* define which PTP packets are time stamped */
+ wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
+
+ /* define ethertype filter for timestamped packets */
+ if (is_l2)
+ wr32(E1000_ETQF(3),
+ (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+ E1000_ETQF_1588 | /* enable timestamping */
+ ETH_P_1588)); /* 1588 eth protocol type */
+ else
+ wr32(E1000_ETQF(3), 0);
+
+#define PTP_PORT 319
+ /* L4 Queue Filter[3]: filter by destination port and protocol */
+ if (is_l4) {
+ u32 ftqf = (IPPROTO_UDP /* UDP */
+ | E1000_FTQF_VF_BP /* VF not compared */
+ | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+ | E1000_FTQF_MASK); /* mask all inputs */
+ ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
+
+ wr32(E1000_IMIR(3), htons(PTP_PORT));
+ wr32(E1000_IMIREXT(3),
+ (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+ if (hw->mac.type == e1000_82576) {
+ /* enable source port check */
+ wr32(E1000_SPQF(3), htons(PTP_PORT));
+ ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+ }
+ wr32(E1000_FTQF(3), ftqf);
+ } else {
+ wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+ }
+ wrfl();
+
+ adapter->hwtstamp_config = config;
+
+ /* clear TX/RX time stamp registers, just to be sure */
+ regval = rd32(E1000_TXSTMPH);
+ regval = rd32(E1000_RXSTMPH);
+
+ return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
+ -EFAULT : 0;
+}
+
+/**
+ * igb_ioctl -
+ * @netdev:
+ * @ifreq:
+ * @cmd:
+ **/
+static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ case SIOCGMIIREG:
+ case SIOCSMIIREG:
+ return igb_mii_ioctl(netdev, ifr, cmd);
+ case SIOCSHWTSTAMP:
+ return igb_hwtstamp_ioctl(netdev, ifr, cmd);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = adapter->pdev->pcie_cap;
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_read_config_word(adapter->pdev, cap_offset + reg, value);
+
+ return 0;
+}
+
+s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+ u16 cap_offset;
+
+ cap_offset = adapter->pdev->pcie_cap;
+ if (!cap_offset)
+ return -E1000_ERR_CONFIG;
+
+ pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
+
+ return 0;
+}
+
+static void igb_vlan_mode(struct net_device *netdev, u32 features)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl;
+
+ igb_irq_disable(adapter);
+
+ if (features & NETIF_F_HW_VLAN_RX) {
+ /* enable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl |= E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Disable CFI check */
+ rctl = rd32(E1000_RCTL);
+ rctl &= ~E1000_RCTL_CFIEN;
+ wr32(E1000_RCTL, rctl);
+ } else {
+ /* disable VLAN tag insert/strip */
+ ctrl = rd32(E1000_CTRL);
+ ctrl &= ~E1000_CTRL_VME;
+ wr32(E1000_CTRL, ctrl);
+ }
+
+ igb_rlpml_set(adapter);
+
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ igb_irq_enable(adapter);
+}
+
+static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+
+ /* attempt to add filter to vlvf array */
+ igb_vlvf_set(adapter, vid, true, pf_id);
+
+ /* add the filter since PF can receive vlans w/o entry in vlvf */
+ igb_vfta_set(hw, vid, true);
+
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int pf_id = adapter->vfs_allocated_count;
+ s32 err;
+
+ igb_irq_disable(adapter);
+
+ if (!test_bit(__IGB_DOWN, &adapter->state))
+ igb_irq_enable(adapter);
+
+ /* remove vlan from VLVF table array */
+ err = igb_vlvf_set(adapter, vid, false, pf_id);
+
+ /* if vid was not present in VLVF just remove it from table */
+ if (err)
+ igb_vfta_set(hw, vid, false);
+
+ clear_bit(vid, adapter->active_vlans);
+}
+
+static void igb_restore_vlan(struct igb_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ igb_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+
+ mac->autoneg = 0;
+
+ /* Make sure dplx is at most 1 bit and lsb of speed is not set
+ * for the switch() below to work */
+ if ((spd & 1) || (dplx & ~1))
+ goto err_inval;
+
+ /* Fiber NIC's only allow 1000 Gbps Full duplex */
+ if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
+ spd != SPEED_1000 &&
+ dplx != DUPLEX_FULL)
+ goto err_inval;
+
+ switch (spd + dplx) {
+ case SPEED_10 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_10_HALF;
+ break;
+ case SPEED_10 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_10_FULL;
+ break;
+ case SPEED_100 + DUPLEX_HALF:
+ mac->forced_speed_duplex = ADVERTISE_100_HALF;
+ break;
+ case SPEED_100 + DUPLEX_FULL:
+ mac->forced_speed_duplex = ADVERTISE_100_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_FULL:
+ mac->autoneg = 1;
+ adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
+ break;
+ case SPEED_1000 + DUPLEX_HALF: /* not supported */
+ default:
+ goto err_inval;
+ }
+ return 0;
+
+err_inval:
+ dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
+ return -EINVAL;
+}
+
+static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ctrl, rctl, status;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev))
+ igb_close(netdev);
+
+ igb_clear_interrupt_scheme(adapter);
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ status = rd32(E1000_STATUS);
+ if (status & E1000_STATUS_LU)
+ wufc &= ~E1000_WUFC_LNKC;
+
+ if (wufc) {
+ igb_setup_rctl(adapter);
+ igb_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & E1000_WUFC_MC) {
+ rctl = rd32(E1000_RCTL);
+ rctl |= E1000_RCTL_MPE;
+ wr32(E1000_RCTL, rctl);
+ }
+
+ ctrl = rd32(E1000_CTRL);
+ /* advertise wake from D3Cold */
+ #define E1000_CTRL_ADVD3WUC 0x00100000
+ /* phy power management enable */
+ #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
+ ctrl |= E1000_CTRL_ADVD3WUC;
+ wr32(E1000_CTRL, ctrl);
+
+ /* Allow time for pending master requests to run */
+ igb_disable_pcie_master(hw);
+
+ wr32(E1000_WUC, E1000_WUC_PME_EN);
+ wr32(E1000_WUFC, wufc);
+ } else {
+ wr32(E1000_WUC, 0);
+ wr32(E1000_WUFC, 0);
+ }
+
+ *enable_wake = wufc || adapter->en_mng_pt;
+ if (!*enable_wake)
+ igb_power_down_link(adapter);
+ else
+ igb_power_up_link(adapter);
+
+ /* Release control of h/w to f/w. If f/w is AMT enabled, this
+ * would have already happened in close and is redundant. */
+ igb_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __igb_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
+static int igb_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev,
+ "igb: Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ if (igb_init_interrupt_scheme(adapter)) {
+ dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+ return -ENOMEM;
+ }
+
+ igb_reset(adapter);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+
+ wr32(E1000_WUS, ~0);
+
+ if (netif_running(netdev)) {
+ err = igb_open(netdev);
+ if (err)
+ return err;
+ }
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void igb_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __igb_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igb_netpoll(struct net_device *netdev)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int i;
+
+ if (!adapter->msix_entries) {
+ struct igb_q_vector *q_vector = adapter->q_vector[0];
+ igb_irq_disable(adapter);
+ napi_schedule(&q_vector->napi);
+ return;
+ }
+
+ for (i = 0; i < adapter->num_q_vectors; i++) {
+ struct igb_q_vector *q_vector = adapter->q_vector[i];
+ wr32(E1000_EIMC, q_vector->eims_value);
+ napi_schedule(&q_vector->napi);
+ }
+}
+#endif /* CONFIG_NET_POLL_CONTROLLER */
+
+/**
+ * igb_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igb_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igb_resume routine.
+ */
+static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ pci_ers_result_t result;
+ int err;
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_enable_wake(pdev, PCI_D3cold, 0);
+
+ igb_reset(adapter);
+ wr32(E1000_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ err = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status "
+ "failed 0x%0x\n", err);
+ /* non-fatal, continue */
+ }
+
+ return result;
+}
+
+/**
+ * igb_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igb_resume routine.
+ */
+static void igb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igb_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igb_up(adapter)) {
+ dev_err(&pdev->dev, "igb_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+
+ /* let the f/w know that the h/w is now under the control of the
+ * driver. */
+ igb_get_hw_control(adapter);
+}
+
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+ u8 qsel)
+{
+ u32 rar_low, rar_high;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+ ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+ rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+ /* Indicate to hardware the Address is Valid. */
+ rar_high |= E1000_RAH_AV;
+
+ if (hw->mac.type == e1000_82575)
+ rar_high |= E1000_RAH_POOL_1 * qsel;
+ else
+ rar_high |= E1000_RAH_POOL_1 << qsel;
+
+ wr32(E1000_RAL(index), rar_low);
+ wrfl();
+ wr32(E1000_RAH(index), rar_high);
+ wrfl();
+}
+
+static int igb_set_vf_mac(struct igb_adapter *adapter,
+ int vf, unsigned char *mac_addr)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ /* VF MAC addresses start at end of receive addresses and moves
+ * torwards the first, as a result a collision should not be possible */
+ int rar_entry = hw->mac.rar_entry_count - (vf + 1);
+
+ memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
+
+ igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
+
+ return 0;
+}
+
+static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
+ return -EINVAL;
+ adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
+ dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+ dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
+ " change effective.");
+ if (test_bit(__IGB_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
+ " but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
+ " attempting to use the VF device.\n");
+ }
+ return igb_set_vf_mac(adapter, vf, mac);
+}
+
+static int igb_link_mbps(int internal_link_speed)
+{
+ switch (internal_link_speed) {
+ case SPEED_100:
+ return 100;
+ case SPEED_1000:
+ return 1000;
+ default:
+ return 0;
+ }
+}
+
+static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
+ int link_speed)
+{
+ int rf_dec, rf_int;
+ u32 bcnrc_val;
+
+ if (tx_rate != 0) {
+ /* Calculate the rate factor values to set */
+ rf_int = link_speed / tx_rate;
+ rf_dec = (link_speed - (rf_int * tx_rate));
+ rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
+
+ bcnrc_val = E1000_RTTBCNRC_RS_ENA;
+ bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) &
+ E1000_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
+ } else {
+ bcnrc_val = 0;
+ }
+
+ wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
+ wr32(E1000_RTTBCNRC, bcnrc_val);
+}
+
+static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
+{
+ int actual_link_speed, i;
+ bool reset_rate = false;
+
+ /* VF TX rate limit was not set or not supported */
+ if ((adapter->vf_rate_link_speed == 0) ||
+ (adapter->hw.mac.type != e1000_82576))
+ return;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if (actual_link_speed != adapter->vf_rate_link_speed) {
+ reset_rate = true;
+ adapter->vf_rate_link_speed = 0;
+ dev_info(&adapter->pdev->dev,
+ "Link speed has been changed. VF Transmit "
+ "rate is disabled\n");
+ }
+
+ for (i = 0; i < adapter->vfs_allocated_count; i++) {
+ if (reset_rate)
+ adapter->vf_data[i].tx_rate = 0;
+
+ igb_set_vf_rate_limit(&adapter->hw, i,
+ adapter->vf_data[i].tx_rate,
+ actual_link_speed);
+ }
+}
+
+static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int actual_link_speed;
+
+ if (hw->mac.type != e1000_82576)
+ return -EOPNOTSUPP;
+
+ actual_link_speed = igb_link_mbps(adapter->link_speed);
+ if ((vf >= adapter->vfs_allocated_count) ||
+ (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
+ (tx_rate < 0) || (tx_rate > actual_link_speed))
+ return -EINVAL;
+
+ adapter->vf_rate_link_speed = actual_link_speed;
+ adapter->vf_data[vf].tx_rate = (u16)tx_rate;
+ igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
+
+ return 0;
+}
+
+static int igb_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct igb_adapter *adapter = netdev_priv(netdev);
+ if (vf >= adapter->vfs_allocated_count)
+ return -EINVAL;
+ ivi->vf = vf;
+ memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
+ ivi->tx_rate = adapter->vf_data[vf].tx_rate;
+ ivi->vlan = adapter->vf_data[vf].pf_vlan;
+ ivi->qos = adapter->vf_data[vf].pf_qos;
+ return 0;
+}
+
+static void igb_vmm_control(struct igb_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 reg;
+
+ switch (hw->mac.type) {
+ case e1000_82575:
+ default:
+ /* replication is not supported for 82575 */
+ return;
+ case e1000_82576:
+ /* notify HW that the MAC is adding vlan tags */
+ reg = rd32(E1000_DTXCTL);
+ reg |= E1000_DTXCTL_VLAN_ADDED;
+ wr32(E1000_DTXCTL, reg);
+ case e1000_82580:
+ /* enable replication vlan tag stripping */
+ reg = rd32(E1000_RPLOLR);
+ reg |= E1000_RPLOLR_STRVLAN;
+ wr32(E1000_RPLOLR, reg);
+ case e1000_i350:
+ /* none of the above registers are supported by i350 */
+ break;
+ }
+
+ if (adapter->vfs_allocated_count) {
+ igb_vmdq_set_loopback_pf(hw, true);
+ igb_vmdq_set_replication_pf(hw, true);
+ igb_vmdq_set_anti_spoofing_pf(hw, true,
+ adapter->vfs_allocated_count);
+ } else {
+ igb_vmdq_set_loopback_pf(hw, false);
+ igb_vmdq_set_replication_pf(hw, false);
+ }
+}
+
+/* igb_main.c */
--- /dev/null
+################################################################################
+#
+# Intel(R) 82576 Virtual Function Linux driver
+# Copyright(c) 2009 - 2010 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82576 VF ethernet driver
+#
+
+obj-$(CONFIG_IGBVF) += igbvf.o
+
+igbvf-objs := vf.o \
+ mbx.o \
+ ethtool.o \
+ netdev.o
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_DEFINES_H_
+#define _E1000_DEFINES_H_
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* IVAR valid bit */
+#define E1000_IVAR_VALID 0x80
+
+/* Receive Descriptor bit definitions */
+#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
+#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
+#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
+#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
+#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+
+#define E1000_RXDEXT_STATERR_CE 0x01000000
+#define E1000_RXDEXT_STATERR_SE 0x02000000
+#define E1000_RXDEXT_STATERR_SEQ 0x04000000
+#define E1000_RXDEXT_STATERR_CXE 0x10000000
+#define E1000_RXDEXT_STATERR_TCPE 0x20000000
+#define E1000_RXDEXT_STATERR_IPE 0x40000000
+#define E1000_RXDEXT_STATERR_RXE 0x80000000
+
+
+/* Same mask, but for extended and packet split descriptors */
+#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
+ E1000_RXDEXT_STATERR_CE | \
+ E1000_RXDEXT_STATERR_SE | \
+ E1000_RXDEXT_STATERR_SEQ | \
+ E1000_RXDEXT_STATERR_CXE | \
+ E1000_RXDEXT_STATERR_RXE)
+
+/* Device Control */
+#define E1000_CTRL_RST 0x04000000 /* Global reset */
+
+/* Device Status */
+#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
+#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
+#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
+#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
+#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
+#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
+
+#define SPEED_10 10
+#define SPEED_100 100
+#define SPEED_1000 1000
+#define HALF_DUPLEX 1
+#define FULL_DUPLEX 2
+
+/* Transmit Descriptor bit definitions */
+#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+
+#define MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* 802.1q VLAN Packet Size */
+#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
+
+/* Error Codes */
+#define E1000_SUCCESS 0
+#define E1000_ERR_CONFIG 3
+#define E1000_ERR_MAC_INIT 5
+#define E1000_ERR_MBX 15
+
+#ifndef ETH_ADDR_LEN
+#define ETH_ADDR_LEN 6
+#endif
+
+/* SRRCTL bit definitions */
+#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
+#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
+#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
+#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
+#define E1000_SRRCTL_DROP_EN 0x80000000
+
+#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
+
+/* Additional Descriptor Control definitions */
+#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
+#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
+
+/* Direct Cache Access (DCA) definitions */
+#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+#endif /* _E1000_DEFINES_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for igbvf */
+
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+
+#include "igbvf.h"
+#include <linux/if_vlan.h>
+
+
+struct igbvf_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+ int base_stat_offset;
+};
+
+#define IGBVF_STAT(current, base) \
+ sizeof(((struct igbvf_adapter *)0)->current), \
+ offsetof(struct igbvf_adapter, current), \
+ offsetof(struct igbvf_adapter, base)
+
+static const struct igbvf_stats igbvf_gstrings_stats[] = {
+ { "rx_packets", IGBVF_STAT(stats.gprc, stats.base_gprc) },
+ { "tx_packets", IGBVF_STAT(stats.gptc, stats.base_gptc) },
+ { "rx_bytes", IGBVF_STAT(stats.gorc, stats.base_gorc) },
+ { "tx_bytes", IGBVF_STAT(stats.gotc, stats.base_gotc) },
+ { "multicast", IGBVF_STAT(stats.mprc, stats.base_mprc) },
+ { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) },
+ { "lbrx_packets", IGBVF_STAT(stats.gprlbc, stats.base_gprlbc) },
+ { "tx_restart_queue", IGBVF_STAT(restart_queue, zero_base) },
+ { "rx_long_byte_count", IGBVF_STAT(stats.gorc, stats.base_gorc) },
+ { "rx_csum_offload_good", IGBVF_STAT(hw_csum_good, zero_base) },
+ { "rx_csum_offload_errors", IGBVF_STAT(hw_csum_err, zero_base) },
+ { "rx_header_split", IGBVF_STAT(rx_hdr_split, zero_base) },
+ { "alloc_rx_buff_failed", IGBVF_STAT(alloc_rx_buff_failed, zero_base) },
+};
+
+#define IGBVF_GLOBAL_STATS_LEN ARRAY_SIZE(igbvf_gstrings_stats)
+
+static const char igbvf_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Link test (on/offline)"
+};
+
+#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test)
+
+static int igbvf_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 status;
+
+ ecmd->supported = SUPPORTED_1000baseT_Full;
+
+ ecmd->advertising = ADVERTISED_1000baseT_Full;
+
+ ecmd->port = -1;
+ ecmd->transceiver = XCVR_DUMMY1;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_LU) {
+ if (status & E1000_STATUS_SPEED_1000)
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ else if (status & E1000_STATUS_SPEED_100)
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ else
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+
+ if (status & E1000_STATUS_FD)
+ ecmd->duplex = DUPLEX_FULL;
+ else
+ ecmd->duplex = DUPLEX_HALF;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int igbvf_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ return -EOPNOTSUPP;
+}
+
+static void igbvf_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ return;
+}
+
+static int igbvf_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ return -EOPNOTSUPP;
+}
+
+static u32 igbvf_get_rx_csum(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ return !(adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED);
+}
+
+static int igbvf_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (data)
+ adapter->flags &= ~IGBVF_FLAG_RX_CSUM_DISABLED;
+ else
+ adapter->flags |= IGBVF_FLAG_RX_CSUM_DISABLED;
+
+ return 0;
+}
+
+static u32 igbvf_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_IP_CSUM) != 0;
+}
+
+static int igbvf_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ else
+ netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ return 0;
+}
+
+static int igbvf_set_tso(struct net_device *netdev, u32 data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (data) {
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ } else {
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ }
+
+ dev_info(&adapter->pdev->dev, "TSO is %s\n",
+ data ? "Enabled" : "Disabled");
+ return 0;
+}
+
+static u32 igbvf_get_msglevel(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void igbvf_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int igbvf_get_regs_len(struct net_device *netdev)
+{
+#define IGBVF_REGS_LEN 8
+ return IGBVF_REGS_LEN * sizeof(u32);
+}
+
+static void igbvf_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+
+ memset(p, 0, IGBVF_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
+ adapter->pdev->device;
+
+ regs_buff[0] = er32(CTRL);
+ regs_buff[1] = er32(STATUS);
+
+ regs_buff[2] = er32(RDLEN(0));
+ regs_buff[3] = er32(RDH(0));
+ regs_buff[4] = er32(RDT(0));
+
+ regs_buff[5] = er32(TDLEN(0));
+ regs_buff[6] = er32(TDH(0));
+ regs_buff[7] = er32(TDT(0));
+}
+
+static int igbvf_get_eeprom_len(struct net_device *netdev)
+{
+ return 0;
+}
+
+static int igbvf_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static int igbvf_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ return -EOPNOTSUPP;
+}
+
+static void igbvf_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32] = "N/A";
+
+ strncpy(drvinfo->driver, igbvf_driver_name, 32);
+ strncpy(drvinfo->version, igbvf_driver_version, 32);
+ strncpy(drvinfo->fw_version, firmware_version, 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->regdump_len = igbvf_get_regs_len(netdev);
+ drvinfo->eedump_len = igbvf_get_eeprom_len(netdev);
+}
+
+static void igbvf_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+
+ ring->rx_max_pending = IGBVF_MAX_RXD;
+ ring->tx_max_pending = IGBVF_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int igbvf_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *temp_ring;
+ int err = 0;
+ u32 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = max(ring->rx_pending, (u32)IGBVF_MIN_RXD);
+ new_rx_count = min(new_rx_count, (u32)IGBVF_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = max(ring->tx_pending, (u32)IGBVF_MIN_TXD);
+ new_tx_count = min(new_tx_count, (u32)IGBVF_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring->count) &&
+ (new_rx_count == adapter->rx_ring->count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+
+ if (!netif_running(adapter->netdev)) {
+ adapter->tx_ring->count = new_tx_count;
+ adapter->rx_ring->count = new_rx_count;
+ goto clear_reset;
+ }
+
+ temp_ring = vmalloc(sizeof(struct igbvf_ring));
+ if (!temp_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ igbvf_down(adapter);
+
+ /*
+ * We can't just free everything and then setup again,
+ * because the ISRs in MSI-X mode get passed pointers
+ * to the tx and rx ring structs.
+ */
+ if (new_tx_count != adapter->tx_ring->count) {
+ memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring));
+
+ temp_ring->count = new_tx_count;
+ err = igbvf_setup_tx_resources(adapter, temp_ring);
+ if (err)
+ goto err_setup;
+
+ igbvf_free_tx_resources(adapter->tx_ring);
+
+ memcpy(adapter->tx_ring, temp_ring, sizeof(struct igbvf_ring));
+ }
+
+ if (new_rx_count != adapter->rx_ring->count) {
+ memcpy(temp_ring, adapter->rx_ring, sizeof(struct igbvf_ring));
+
+ temp_ring->count = new_rx_count;
+ err = igbvf_setup_rx_resources(adapter, temp_ring);
+ if (err)
+ goto err_setup;
+
+ igbvf_free_rx_resources(adapter->rx_ring);
+
+ memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
+ }
+err_setup:
+ igbvf_up(adapter);
+ vfree(temp_ring);
+clear_reset:
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+ return err;
+}
+
+static int igbvf_link_test(struct igbvf_adapter *adapter, u64 *data)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ *data = 0;
+
+ hw->mac.ops.check_for_link(hw);
+
+ if (!(er32(STATUS) & E1000_STATUS_LU))
+ *data = 1;
+
+ return *data;
+}
+
+static void igbvf_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ set_bit(__IGBVF_TESTING, &adapter->state);
+
+ /*
+ * Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result
+ */
+ if (igbvf_link_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ clear_bit(__IGBVF_TESTING, &adapter->state);
+ msleep_interruptible(4 * 1000);
+}
+
+static void igbvf_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+}
+
+static int igbvf_set_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ return -EOPNOTSUPP;
+}
+
+static int igbvf_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->itr_setting <= 3)
+ ec->rx_coalesce_usecs = adapter->itr_setting;
+ else
+ ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
+
+ return 0;
+}
+
+static int igbvf_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
+ ((ec->rx_coalesce_usecs > 3) &&
+ (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
+ (ec->rx_coalesce_usecs == 2))
+ return -EINVAL;
+
+ /* convert to rate of irq's per second */
+ if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
+ adapter->itr = IGBVF_START_ITR;
+ adapter->itr_setting = ec->rx_coalesce_usecs;
+ } else {
+ adapter->itr = ec->rx_coalesce_usecs << 2;
+ adapter->itr_setting = adapter->itr;
+ }
+
+ writel(adapter->itr,
+ hw->hw_addr + adapter->rx_ring[0].itr_register);
+
+ return 0;
+}
+
+static int igbvf_nway_reset(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ if (netif_running(netdev))
+ igbvf_reinit_locked(adapter);
+ return 0;
+}
+
+
+static void igbvf_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ igbvf_update_stats(adapter);
+ for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter +
+ igbvf_gstrings_stats[i].stat_offset;
+ char *b = (char *)adapter +
+ igbvf_gstrings_stats[i].base_stat_offset;
+ data[i] = ((igbvf_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
+ (*(u32 *)p - *(u32 *)b));
+ }
+
+}
+
+static int igbvf_get_sset_count(struct net_device *dev, int stringset)
+{
+ switch(stringset) {
+ case ETH_SS_TEST:
+ return IGBVF_TEST_LEN;
+ case ETH_SS_STATS:
+ return IGBVF_GLOBAL_STATS_LEN;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ u8 *p = data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *igbvf_gstrings_test, sizeof(igbvf_gstrings_test));
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, igbvf_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static const struct ethtool_ops igbvf_ethtool_ops = {
+ .get_settings = igbvf_get_settings,
+ .set_settings = igbvf_set_settings,
+ .get_drvinfo = igbvf_get_drvinfo,
+ .get_regs_len = igbvf_get_regs_len,
+ .get_regs = igbvf_get_regs,
+ .get_wol = igbvf_get_wol,
+ .set_wol = igbvf_set_wol,
+ .get_msglevel = igbvf_get_msglevel,
+ .set_msglevel = igbvf_set_msglevel,
+ .nway_reset = igbvf_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = igbvf_get_eeprom_len,
+ .get_eeprom = igbvf_get_eeprom,
+ .set_eeprom = igbvf_set_eeprom,
+ .get_ringparam = igbvf_get_ringparam,
+ .set_ringparam = igbvf_set_ringparam,
+ .get_pauseparam = igbvf_get_pauseparam,
+ .set_pauseparam = igbvf_set_pauseparam,
+ .get_rx_csum = igbvf_get_rx_csum,
+ .set_rx_csum = igbvf_set_rx_csum,
+ .get_tx_csum = igbvf_get_tx_csum,
+ .set_tx_csum = igbvf_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = igbvf_set_tso,
+ .self_test = igbvf_diag_test,
+ .get_sset_count = igbvf_get_sset_count,
+ .get_strings = igbvf_get_strings,
+ .get_ethtool_stats = igbvf_get_ethtool_stats,
+ .get_coalesce = igbvf_get_coalesce,
+ .set_coalesce = igbvf_set_coalesce,
+};
+
+void igbvf_set_ethtool_ops(struct net_device *netdev)
+{
+ /* have to "undeclare" const on this struct to remove warnings */
+ SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igbvf_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* Linux PRO/1000 Ethernet Driver main header file */
+
+#ifndef _IGBVF_H_
+#define _IGBVF_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+
+#include "vf.h"
+
+/* Forward declarations */
+struct igbvf_info;
+struct igbvf_adapter;
+
+/* Interrupt defines */
+#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
+
+/* Interrupt modes, as used by the IntMode parameter */
+#define IGBVF_INT_MODE_LEGACY 0
+#define IGBVF_INT_MODE_MSI 1
+#define IGBVF_INT_MODE_MSIX 2
+
+/* Tx/Rx descriptor defines */
+#define IGBVF_DEFAULT_TXD 256
+#define IGBVF_MAX_TXD 4096
+#define IGBVF_MIN_TXD 80
+
+#define IGBVF_DEFAULT_RXD 256
+#define IGBVF_MAX_RXD 4096
+#define IGBVF_MIN_RXD 80
+
+#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
+#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
+
+/* RX descriptor control thresholds.
+ * PTHRESH - MAC will consider prefetch if it has fewer than this number of
+ * descriptors available in its onboard memory.
+ * Setting this to 0 disables RX descriptor prefetch.
+ * HTHRESH - MAC will only prefetch if there are at least this many descriptors
+ * available in host memory.
+ * If PTHRESH is 0, this should also be 0.
+ * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
+ * descriptors until either it has this many to write back, or the
+ * ITR timer expires.
+ */
+#define IGBVF_RX_PTHRESH 16
+#define IGBVF_RX_HTHRESH 8
+#define IGBVF_RX_WTHRESH 1
+
+/* this is the size past which hardware will drop packets when setting LPE=0 */
+#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
+
+#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
+
+/* How many Tx Descriptors do we need to call netif_wake_queue ? */
+#define IGBVF_TX_QUEUE_WAKE 32
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define AUTO_ALL_MODES 0
+#define IGBVF_EEPROM_APME 0x0400
+
+#define IGBVF_MNG_VLAN_NONE (-1)
+
+/* Number of packet split data buffers (not including the header buffer) */
+#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
+
+enum igbvf_boards {
+ board_vf,
+ board_i350_vf,
+};
+
+struct igbvf_queue_stats {
+ u64 packets;
+ u64 bytes;
+};
+
+/*
+ * wrappers around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer
+ */
+struct igbvf_buffer {
+ dma_addr_t dma;
+ struct sk_buff *skb;
+ union {
+ /* Tx */
+ struct {
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+ };
+ /* Rx */
+ struct {
+ struct page *page;
+ u64 page_dma;
+ unsigned int page_offset;
+ };
+ };
+};
+
+union igbvf_desc {
+ union e1000_adv_rx_desc rx_desc;
+ union e1000_adv_tx_desc tx_desc;
+ struct e1000_adv_tx_context_desc tx_context_desc;
+};
+
+struct igbvf_ring {
+ struct igbvf_adapter *adapter; /* backlink */
+ union igbvf_desc *desc; /* pointer to ring memory */
+ dma_addr_t dma; /* phys address of ring */
+ unsigned int size; /* length of ring in bytes */
+ unsigned int count; /* number of desc. in ring */
+
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u16 head;
+ u16 tail;
+
+ /* array of buffer information structs */
+ struct igbvf_buffer *buffer_info;
+ struct napi_struct napi;
+
+ char name[IFNAMSIZ + 5];
+ u32 eims_value;
+ u32 itr_val;
+ u16 itr_register;
+ int set_itr;
+
+ struct sk_buff *rx_skb_top;
+
+ struct igbvf_queue_stats stats;
+};
+
+/* board specific private data structure */
+struct igbvf_adapter {
+ struct timer_list watchdog_timer;
+ struct timer_list blink_timer;
+
+ struct work_struct reset_task;
+ struct work_struct watchdog_task;
+
+ const struct igbvf_info *ei;
+
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 polling_interval;
+ u16 mng_vlan_id;
+ u16 link_speed;
+ u16 link_duplex;
+
+ spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
+
+ /* track device up/down/testing state */
+ unsigned long state;
+
+ /* Interrupt Throttle Rate */
+ u32 itr;
+ u32 itr_setting;
+ u16 tx_itr;
+ u16 rx_itr;
+
+ /*
+ * Tx
+ */
+ struct igbvf_ring *tx_ring /* One per active queue */
+ ____cacheline_aligned_in_smp;
+
+ unsigned int restart_queue;
+ u32 txd_cmd;
+
+ u32 tx_int_delay;
+ u32 tx_abs_int_delay;
+
+ unsigned int total_tx_bytes;
+ unsigned int total_tx_packets;
+ unsigned int total_rx_bytes;
+ unsigned int total_rx_packets;
+
+ /* Tx stats */
+ u32 tx_timeout_count;
+ u32 tx_fifo_head;
+ u32 tx_head_addr;
+ u32 tx_fifo_size;
+ u32 tx_dma_failed;
+
+ /*
+ * Rx
+ */
+ struct igbvf_ring *rx_ring;
+
+ u32 rx_int_delay;
+ u32 rx_abs_int_delay;
+
+ /* Rx stats */
+ u64 hw_csum_err;
+ u64 hw_csum_good;
+ u64 rx_hdr_split;
+ u32 alloc_rx_buff_failed;
+ u32 rx_dma_failed;
+
+ unsigned int rx_ps_hdr_size;
+ u32 max_frame_size;
+ u32 min_frame_size;
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct net_device_stats net_stats;
+ spinlock_t stats_lock; /* prevent concurrent stats updates */
+
+ /* structs defined in e1000_hw.h */
+ struct e1000_hw hw;
+
+ /* The VF counters don't clear on read so we have to get a base
+ * count on driver start up and always subtract that base on
+ * on the first update, thus the flag..
+ */
+ struct e1000_vf_stats stats;
+ u64 zero_base;
+
+ struct igbvf_ring test_tx_ring;
+ struct igbvf_ring test_rx_ring;
+ u32 test_icr;
+
+ u32 msg_enable;
+ struct msix_entry *msix_entries;
+ int int_mode;
+ u32 eims_enable_mask;
+ u32 eims_other;
+ u32 int_counter0;
+ u32 int_counter1;
+
+ u32 eeprom_wol;
+ u32 wol;
+ u32 pba;
+
+ bool fc_autoneg;
+
+ unsigned long led_status;
+
+ unsigned int flags;
+ unsigned long last_reset;
+};
+
+struct igbvf_info {
+ enum e1000_mac_type mac;
+ unsigned int flags;
+ u32 pba;
+ void (*init_ops)(struct e1000_hw *);
+ s32 (*get_variants)(struct igbvf_adapter *);
+};
+
+/* hardware capability, feature, and workaround flags */
+#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
+
+#define IGBVF_RX_DESC_ADV(R, i) \
+ (&((((R).desc))[i].rx_desc))
+#define IGBVF_TX_DESC_ADV(R, i) \
+ (&((((R).desc))[i].tx_desc))
+#define IGBVF_TX_CTXTDESC_ADV(R, i) \
+ (&((((R).desc))[i].tx_context_desc))
+
+enum igbvf_state_t {
+ __IGBVF_TESTING,
+ __IGBVF_RESETTING,
+ __IGBVF_DOWN
+};
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+extern char igbvf_driver_name[];
+extern const char igbvf_driver_version[];
+
+extern void igbvf_check_options(struct igbvf_adapter *);
+extern void igbvf_set_ethtool_ops(struct net_device *);
+
+extern int igbvf_up(struct igbvf_adapter *);
+extern void igbvf_down(struct igbvf_adapter *);
+extern void igbvf_reinit_locked(struct igbvf_adapter *);
+extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *);
+extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *);
+extern void igbvf_free_rx_resources(struct igbvf_ring *);
+extern void igbvf_free_tx_resources(struct igbvf_ring *);
+extern void igbvf_update_stats(struct igbvf_adapter *);
+
+extern unsigned int copybreak;
+
+#endif /* _IGBVF_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "mbx.h"
+
+/**
+ * e1000_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 e1000_poll_for_msg(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw)) {
+ countdown--;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * e1000_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 e1000_poll_for_ack(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw)) {
+ countdown--;
+ udelay(mbx->usec_delay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+out:
+ return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
+}
+
+/**
+ * e1000_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = e1000_poll_for_msg(hw);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* exit if we either can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg*/
+ ret_val = mbx->ops.write(hw, msg, size);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = e1000_poll_for_ack(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_read_v2p_mailbox - read v2p mailbox
+ * @hw: pointer to the HW structure
+ *
+ * This function is used to read the v2p mailbox without losing the read to
+ * clear status bits.
+ **/
+static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
+{
+ u32 v2p_mailbox = er32(V2PMAILBOX(0));
+
+ v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
+ hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
+
+ return v2p_mailbox;
+}
+
+/**
+ * e1000_check_for_bit_vf - Determine if a status bit was set
+ * @hw: pointer to the HW structure
+ * @mask: bitmask for bits to be tested and cleared
+ *
+ * This function is used to check for the read to clear bits within
+ * the V2P mailbox.
+ **/
+static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
+{
+ u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (v2p_mailbox & mask)
+ ret_val = E1000_SUCCESS;
+
+ hw->dev_spec.vf.v2p_mailbox &= ~mask;
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_msg_vf - checks to see if the PF has sent mail
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_ack_vf - checks to see if the PF has ACK'd
+ * @hw: pointer to the HW structure
+ *
+ * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_check_for_rst_vf - checks to see if the PF has reset
+ * @hw: pointer to the HW structure
+ *
+ * returns true if the PF has set the reset done bit or else false
+ **/
+static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
+ E1000_V2PMAILBOX_RSTI))) {
+ ret_val = E1000_SUCCESS;
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_obtain_mbx_lock_vf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
+{
+ s32 ret_val = -E1000_ERR_MBX;
+
+ /* Take ownership of the buffer */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
+
+ /* reserve mailbox for vf use */
+ if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
+ ret_val = E1000_SUCCESS;
+
+ return ret_val;
+}
+
+/**
+ * e1000_write_mbx_vf - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ s32 err;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ err = e1000_obtain_mbx_lock_vf(hw);
+ if (err)
+ goto out_no_write;
+
+ /* flush any ack or msg as we are going to overwrite mailbox */
+ e1000_check_for_ack_vf(hw);
+ e1000_check_for_msg_vf(hw);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ array_ew32(VMBMEM(0), i, msg[i]);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+ /* Drop VFU and interrupt the PF to tell it a message has been sent */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
+
+out_no_write:
+ return err;
+}
+
+/**
+ * e1000_read_mbx_vf - Reads a message from the inbox intended for vf
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns SUCCESS if it successfuly read message from buffer
+ **/
+static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
+{
+ s32 err;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ err = e1000_obtain_mbx_lock_vf(hw);
+ if (err)
+ goto out_no_read;
+
+ /* copy the message from the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = array_er32(VMBMEM(0), i);
+
+ /* Acknowledge receipt and release mailbox, then we're done */
+ ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return err;
+}
+
+/**
+ * e1000_init_mbx_params_vf - set initial values for vf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+
+ /* start mailbox as timed out and let the reset_hw call set the timeout
+ * value to being communications */
+ mbx->timeout = 0;
+ mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
+
+ mbx->size = E1000_VFMAILBOX_SIZE;
+
+ mbx->ops.read = e1000_read_mbx_vf;
+ mbx->ops.write = e1000_write_mbx_vf;
+ mbx->ops.read_posted = e1000_read_posted_mbx;
+ mbx->ops.write_posted = e1000_write_posted_mbx;
+ mbx->ops.check_for_msg = e1000_check_for_msg_vf;
+ mbx->ops.check_for_ack = e1000_check_for_ack_vf;
+ mbx->ops.check_for_rst = e1000_check_for_rst_vf;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return E1000_SUCCESS;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_MBX_H_
+#define _E1000_MBX_H_
+
+#include "vf.h"
+
+#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+
+/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is E1000_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ clear to send requests */
+
+/* We have a total wait time of 1s for vf mailbox posted messages */
+#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */
+#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
+
+#define E1000_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
+
+#define E1000_VF_RESET 0x01 /* VF requests reset */
+#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+
+#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
+s32 e1000_init_mbx_params_vf(struct e1000_hw *);
+
+#endif /* _E1000_MBX_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/prefetch.h>
+
+#include "igbvf.h"
+
+#define DRV_VERSION "2.0.0-k"
+char igbvf_driver_name[] = "igbvf";
+const char igbvf_driver_version[] = DRV_VERSION;
+static const char igbvf_driver_string[] =
+ "Intel(R) Virtual Function Network Driver";
+static const char igbvf_copyright[] =
+ "Copyright (c) 2009 - 2010 Intel Corporation.";
+
+static int igbvf_poll(struct napi_struct *napi, int budget);
+static void igbvf_reset(struct igbvf_adapter *);
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
+
+static struct igbvf_info igbvf_vf_info = {
+ .mac = e1000_vfadapt,
+ .flags = 0,
+ .pba = 10,
+ .init_ops = e1000_init_function_pointers_vf,
+};
+
+static struct igbvf_info igbvf_i350_vf_info = {
+ .mac = e1000_vfadapt_i350,
+ .flags = 0,
+ .pba = 10,
+ .init_ops = e1000_init_function_pointers_vf,
+};
+
+static const struct igbvf_info *igbvf_info_tbl[] = {
+ [board_vf] = &igbvf_vf_info,
+ [board_i350_vf] = &igbvf_i350_vf_info,
+};
+
+/**
+ * igbvf_desc_unused - calculate if we have unused descriptors
+ **/
+static int igbvf_desc_unused(struct igbvf_ring *ring)
+{
+ if (ring->next_to_clean > ring->next_to_use)
+ return ring->next_to_clean - ring->next_to_use - 1;
+
+ return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
+/**
+ * igbvf_receive_skb - helper function to handle Rx indications
+ * @adapter: board private structure
+ * @status: descriptor status field as written by hardware
+ * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
+ * @skb: pointer to sk_buff to be indicated to stack
+ **/
+static void igbvf_receive_skb(struct igbvf_adapter *adapter,
+ struct net_device *netdev,
+ struct sk_buff *skb,
+ u32 status, u16 vlan)
+{
+ if (status & E1000_RXD_STAT_VP) {
+ u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
+
+ __vlan_hwaccel_put_tag(skb, vid);
+ }
+ netif_receive_skb(skb);
+}
+
+static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
+ u32 status_err, struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Ignore Checksum bit is set or checksum is disabled through ethtool */
+ if ((status_err & E1000_RXD_STAT_IXSM) ||
+ (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED))
+ return;
+
+ /* TCP/UDP checksum error bit is set */
+ if (status_err &
+ (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
+ /* let the stack verify checksum errors */
+ adapter->hw_csum_err++;
+ return;
+ }
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ adapter->hw_csum_good++;
+}
+
+/**
+ * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @rx_ring: address of ring structure to repopulate
+ * @cleaned_count: number of buffers to repopulate
+ **/
+static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring,
+ int cleaned_count)
+{
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc;
+ struct igbvf_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ int bufsz;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+
+ if (adapter->rx_ps_hdr_size)
+ bufsz = adapter->rx_ps_hdr_size;
+ else
+ bufsz = adapter->rx_buffer_len;
+
+ while (cleaned_count--) {
+ rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
+
+ if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
+ if (!buffer_info->page) {
+ buffer_info->page = alloc_page(GFP_ATOMIC);
+ if (!buffer_info->page) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ buffer_info->page_offset = 0;
+ } else {
+ buffer_info->page_offset ^= PAGE_SIZE / 2;
+ }
+ buffer_info->page_dma =
+ dma_map_page(&pdev->dev, buffer_info->page,
+ buffer_info->page_offset,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ }
+
+ if (!buffer_info->skb) {
+ skb = netdev_alloc_skb_ip_align(netdev, bufsz);
+ if (!skb) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+
+ buffer_info->skb = skb;
+ buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
+ bufsz,
+ DMA_FROM_DEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't change because
+ * each write-back erases this info. */
+ if (adapter->rx_ps_hdr_size) {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
+ } else {
+ rx_desc->read.pkt_addr =
+ cpu_to_le64(buffer_info->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ if (i == 0)
+ i = (rx_ring->count - 1);
+ else
+ i--;
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+ writel(i, adapter->hw.hw_addr + rx_ring->tail);
+ }
+}
+
+/**
+ * igbvf_clean_rx_irq - Send received data up the network stack; legacy
+ * @adapter: board private structure
+ *
+ * the return value indicates whether actual cleaning was done, there
+ * is no guarantee that everything was cleaned
+ **/
+static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
+ int *work_done, int work_to_do)
+{
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ union e1000_adv_rx_desc *rx_desc, *next_rxd;
+ struct igbvf_buffer *buffer_info, *next_buffer;
+ struct sk_buff *skb;
+ bool cleaned = false;
+ int cleaned_count = 0;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i;
+ u32 length, hlen, staterr;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & E1000_RXD_STAT_DD) {
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ buffer_info = &rx_ring->buffer_info[i];
+
+ /* HW will not DMA in data larger than the given buffer, even
+ * if it parses the (NFS, of course) header to be larger. In
+ * that case, it fills the header buffer and spills the rest
+ * into the page.
+ */
+ hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) &
+ E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
+ if (hlen > adapter->rx_ps_hdr_size)
+ hlen = adapter->rx_ps_hdr_size;
+
+ length = le16_to_cpu(rx_desc->wb.upper.length);
+ cleaned = true;
+ cleaned_count++;
+
+ skb = buffer_info->skb;
+ prefetch(skb->data - NET_IP_ALIGN);
+ buffer_info->skb = NULL;
+ if (!adapter->rx_ps_hdr_size) {
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ skb_put(skb, length);
+ goto send_up;
+ }
+
+ if (!skb_shinfo(skb)->nr_frags) {
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_ps_hdr_size,
+ DMA_FROM_DEVICE);
+ skb_put(skb, hlen);
+ }
+
+ if (length) {
+ dma_unmap_page(&pdev->dev, buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ buffer_info->page_dma = 0;
+
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ buffer_info->page,
+ buffer_info->page_offset,
+ length);
+
+ if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
+ (page_count(buffer_info->page) != 1))
+ buffer_info->page = NULL;
+ else
+ get_page(buffer_info->page);
+
+ skb->len += length;
+ skb->data_len += length;
+ skb->truesize += length;
+ }
+send_up:
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i);
+ prefetch(next_rxd);
+ next_buffer = &rx_ring->buffer_info[i];
+
+ if (!(staterr & E1000_RXD_STAT_EOP)) {
+ buffer_info->skb = next_buffer->skb;
+ buffer_info->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ goto next_desc;
+ }
+
+ if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ total_bytes += skb->len;
+ total_packets++;
+
+ igbvf_rx_checksum_adv(adapter, staterr, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ igbvf_receive_skb(adapter, netdev, skb, staterr,
+ rx_desc->wb.upper.vlan);
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) {
+ igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ rx_ring->next_to_clean = i;
+ cleaned_count = igbvf_desc_unused(rx_ring);
+
+ if (cleaned_count)
+ igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
+
+ adapter->total_rx_packets += total_packets;
+ adapter->total_rx_bytes += total_bytes;
+ adapter->net_stats.rx_bytes += total_bytes;
+ adapter->net_stats.rx_packets += total_packets;
+ return cleaned;
+}
+
+static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
+ struct igbvf_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+}
+
+/**
+ * igbvf_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct igbvf_buffer) * tx_ring->count;
+ tx_ring->buffer_info = vzalloc(size);
+ if (!tx_ring->buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->adapter = adapter;
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ return 0;
+err:
+ vfree(tx_ring->buffer_info);
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate memory for the transmit descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igbvf_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int igbvf_setup_rx_resources(struct igbvf_adapter *adapter,
+ struct igbvf_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size, desc_len;
+
+ size = sizeof(struct igbvf_buffer) * rx_ring->count;
+ rx_ring->buffer_info = vzalloc(size);
+ if (!rx_ring->buffer_info)
+ goto err;
+
+ desc_len = sizeof(union e1000_adv_rx_desc);
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * desc_len;
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ rx_ring->adapter = adapter;
+
+ return 0;
+
+err:
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate memory for the receive descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * igbvf_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = tx_ring->adapter;
+ struct igbvf_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!tx_ring->buffer_info)
+ return;
+
+ /* Free all the Tx ring sk_buffs */
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ igbvf_put_txbuf(adapter, buffer_info);
+ }
+
+ size = sizeof(struct igbvf_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ writel(0, adapter->hw.hw_addr + tx_ring->head);
+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * igbvf_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: ring to free resources from
+ *
+ * Free all transmit software resources
+ **/
+void igbvf_free_tx_resources(struct igbvf_ring *tx_ring)
+{
+ struct pci_dev *pdev = tx_ring->adapter->pdev;
+
+ igbvf_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->buffer_info);
+ tx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * igbvf_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ **/
+static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring)
+{
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct igbvf_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ if (!rx_ring->buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ if (adapter->rx_ps_hdr_size){
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_ps_hdr_size,
+ DMA_FROM_DEVICE);
+ } else {
+ dma_unmap_single(&pdev->dev, buffer_info->dma,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+ }
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+
+ if (buffer_info->page) {
+ if (buffer_info->page_dma)
+ dma_unmap_page(&pdev->dev,
+ buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ put_page(buffer_info->page);
+ buffer_info->page = NULL;
+ buffer_info->page_dma = 0;
+ buffer_info->page_offset = 0;
+ }
+ }
+
+ size = sizeof(struct igbvf_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ writel(0, adapter->hw.hw_addr + rx_ring->head);
+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+/**
+ * igbvf_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+
+void igbvf_free_rx_resources(struct igbvf_ring *rx_ring)
+{
+ struct pci_dev *pdev = rx_ring->adapter->pdev;
+
+ igbvf_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+ rx_ring->desc = NULL;
+}
+
+/**
+ * igbvf_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @itr_setting: current adapter->itr
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput. This functionality is controlled
+ * by the InterruptThrottleRate module parameter.
+ **/
+static unsigned int igbvf_update_itr(struct igbvf_adapter *adapter,
+ u16 itr_setting, int packets,
+ int bytes)
+{
+ unsigned int retval = itr_setting;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+ switch (itr_setting) {
+ case lowest_latency:
+ /* handle TSO and jumbo frames */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 5) && (bytes > 512))
+ retval = low_latency;
+ break;
+ case low_latency: /* 50 usec aka 20000 ints/s */
+ if (bytes > 10000) {
+ /* this if handles the TSO accounting */
+ if (bytes/packets > 8000)
+ retval = bulk_latency;
+ else if ((packets < 10) || ((bytes/packets) > 1200))
+ retval = bulk_latency;
+ else if ((packets > 35))
+ retval = lowest_latency;
+ } else if (bytes/packets > 2000) {
+ retval = bulk_latency;
+ } else if (packets <= 2 && bytes < 512) {
+ retval = lowest_latency;
+ }
+ break;
+ case bulk_latency: /* 250 usec aka 4000 ints/s */
+ if (bytes > 25000) {
+ if (packets > 35)
+ retval = low_latency;
+ } else if (bytes < 6000) {
+ retval = low_latency;
+ }
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+static void igbvf_set_itr(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u16 current_itr;
+ u32 new_itr = adapter->itr;
+
+ adapter->tx_itr = igbvf_update_itr(adapter, adapter->tx_itr,
+ adapter->total_tx_packets,
+ adapter->total_tx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
+ adapter->tx_itr = low_latency;
+
+ adapter->rx_itr = igbvf_update_itr(adapter, adapter->rx_itr,
+ adapter->total_rx_packets,
+ adapter->total_rx_bytes);
+ /* conservative mode (itr 3) eliminates the lowest_latency setting */
+ if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
+ adapter->rx_itr = low_latency;
+
+ current_itr = max(adapter->rx_itr, adapter->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 70000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 4000;
+ break;
+ default:
+ break;
+ }
+
+ if (new_itr != adapter->itr) {
+ /*
+ * this attempts to bias the interrupt rate towards Bulk
+ * by adding intermediate steps when interrupt rate is
+ * increasing
+ */
+ new_itr = new_itr > adapter->itr ?
+ min(adapter->itr + (new_itr >> 2), new_itr) :
+ new_itr;
+ adapter->itr = new_itr;
+ adapter->rx_ring->itr_val = 1952;
+
+ if (adapter->msix_entries)
+ adapter->rx_ring->set_itr = 1;
+ else
+ ew32(ITR, 1952);
+ }
+}
+
+/**
+ * igbvf_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ * returns true if ring is completely cleaned
+ **/
+static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = tx_ring->adapter;
+ struct net_device *netdev = adapter->netdev;
+ struct igbvf_buffer *buffer_info;
+ struct sk_buff *skb;
+ union e1000_adv_tx_desc *tx_desc, *eop_desc;
+ unsigned int total_bytes = 0, total_packets = 0;
+ unsigned int i, eop, count = 0;
+ bool cleaned = false;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
+
+ while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
+ (count < tx_ring->count)) {
+ rmb(); /* read buffer_info after eop_desc status */
+ for (cleaned = false; !cleaned; count++) {
+ tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+ cleaned = (i == eop);
+ skb = buffer_info->skb;
+
+ if (skb) {
+ unsigned int segs, bytecount;
+
+ /* gso_segs is currently only valid for tcp */
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_packets += segs;
+ total_bytes += bytecount;
+ }
+
+ igbvf_put_txbuf(adapter, buffer_info);
+ tx_desc->wb.status = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(count &&
+ netif_carrier_ok(netdev) &&
+ igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__IGBVF_DOWN, &adapter->state))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ adapter->net_stats.tx_bytes += total_bytes;
+ adapter->net_stats.tx_packets += total_packets;
+ return count < tx_ring->count;
+}
+
+static irqreturn_t igbvf_msix_other(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->int_counter1++;
+
+ netif_carrier_off(netdev);
+ hw->mac.get_link_status = 1;
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+ ew32(EIMS, adapter->eims_other);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igbvf_intr_msix_tx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+
+
+ adapter->total_tx_bytes = 0;
+ adapter->total_tx_packets = 0;
+
+ /* auto mask will automatically reenable the interrupt when we write
+ * EICS */
+ if (!igbvf_clean_tx_irq(tx_ring))
+ /* Ring was not completely cleaned, so fire another interrupt */
+ ew32(EICS, tx_ring->eims_value);
+ else
+ ew32(EIMS, tx_ring->eims_value);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t igbvf_intr_msix_rx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ adapter->int_counter0++;
+
+ /* Write the ITR value calculated at the end of the
+ * previous interrupt.
+ */
+ if (adapter->rx_ring->set_itr) {
+ writel(adapter->rx_ring->itr_val,
+ adapter->hw.hw_addr + adapter->rx_ring->itr_register);
+ adapter->rx_ring->set_itr = 0;
+ }
+
+ if (napi_schedule_prep(&adapter->rx_ring->napi)) {
+ adapter->total_rx_bytes = 0;
+ adapter->total_rx_packets = 0;
+ __napi_schedule(&adapter->rx_ring->napi);
+ }
+
+ return IRQ_HANDLED;
+}
+
+#define IGBVF_NO_QUEUE -1
+
+static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue,
+ int tx_queue, int msix_vector)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 ivar, index;
+
+ /* 82576 uses a table-based method for assigning vectors.
+ Each queue has a single entry in the table to which we write
+ a vector number along with a "valid" bit. Sadly, the layout
+ of the table is somewhat counterintuitive. */
+ if (rx_queue > IGBVF_NO_QUEUE) {
+ index = (rx_queue >> 1);
+ ivar = array_er32(IVAR0, index);
+ if (rx_queue & 0x1) {
+ /* vector goes into third byte of register */
+ ivar = ivar & 0xFF00FFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
+ } else {
+ /* vector goes into low byte of register */
+ ivar = ivar & 0xFFFFFF00;
+ ivar |= msix_vector | E1000_IVAR_VALID;
+ }
+ adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector;
+ array_ew32(IVAR0, index, ivar);
+ }
+ if (tx_queue > IGBVF_NO_QUEUE) {
+ index = (tx_queue >> 1);
+ ivar = array_er32(IVAR0, index);
+ if (tx_queue & 0x1) {
+ /* vector goes into high byte of register */
+ ivar = ivar & 0x00FFFFFF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
+ } else {
+ /* vector goes into second byte of register */
+ ivar = ivar & 0xFFFF00FF;
+ ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+ }
+ adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector;
+ array_ew32(IVAR0, index, ivar);
+ }
+}
+
+/**
+ * igbvf_configure_msix - Configure MSI-X hardware
+ *
+ * igbvf_configure_msix sets up the hardware to properly
+ * generate MSI-X interrupts.
+ **/
+static void igbvf_configure_msix(struct igbvf_adapter *adapter)
+{
+ u32 tmp;
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ int vector = 0;
+
+ adapter->eims_enable_mask = 0;
+
+ igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++);
+ adapter->eims_enable_mask |= tx_ring->eims_value;
+ if (tx_ring->itr_val)
+ writel(tx_ring->itr_val,
+ hw->hw_addr + tx_ring->itr_register);
+ else
+ writel(1952, hw->hw_addr + tx_ring->itr_register);
+
+ igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++);
+ adapter->eims_enable_mask |= rx_ring->eims_value;
+ if (rx_ring->itr_val)
+ writel(rx_ring->itr_val,
+ hw->hw_addr + rx_ring->itr_register);
+ else
+ writel(1952, hw->hw_addr + rx_ring->itr_register);
+
+ /* set vector for other causes, i.e. link changes */
+
+ tmp = (vector++ | E1000_IVAR_VALID);
+
+ ew32(IVAR_MISC, tmp);
+
+ adapter->eims_enable_mask = (1 << (vector)) - 1;
+ adapter->eims_other = 1 << (vector - 1);
+ e1e_flush();
+}
+
+static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
+{
+ if (adapter->msix_entries) {
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ }
+}
+
+/**
+ * igbvf_set_interrupt_capability - set MSI or MSI-X if supported
+ *
+ * Attempt to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
+{
+ int err = -ENOMEM;
+ int i;
+
+ /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */
+ adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry),
+ GFP_KERNEL);
+ if (adapter->msix_entries) {
+ for (i = 0; i < 3; i++)
+ adapter->msix_entries[i].entry = i;
+
+ err = pci_enable_msix(adapter->pdev,
+ adapter->msix_entries, 3);
+ }
+
+ if (err) {
+ /* MSI-X failed */
+ dev_err(&adapter->pdev->dev,
+ "Failed to initialize MSI-X interrupts.\n");
+ igbvf_reset_interrupt_capability(adapter);
+ }
+}
+
+/**
+ * igbvf_request_msix - Initialize MSI-X interrupts
+ *
+ * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the
+ * kernel.
+ **/
+static int igbvf_request_msix(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err = 0, vector = 0;
+
+ if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
+ sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
+ sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
+ } else {
+ memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
+ memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
+ }
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+
+ adapter->tx_ring->itr_register = E1000_EITR(vector);
+ adapter->tx_ring->itr_val = 1952;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
+ netdev);
+ if (err)
+ goto out;
+
+ adapter->rx_ring->itr_register = E1000_EITR(vector);
+ adapter->rx_ring->itr_val = 1952;
+ vector++;
+
+ err = request_irq(adapter->msix_entries[vector].vector,
+ igbvf_msix_other, 0, netdev->name, netdev);
+ if (err)
+ goto out;
+
+ igbvf_configure_msix(adapter);
+ return 0;
+out:
+ return err;
+}
+
+/**
+ * igbvf_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ **/
+static int __devinit igbvf_alloc_queues(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ return -ENOMEM;
+
+ adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
+ if (!adapter->rx_ring) {
+ kfree(adapter->tx_ring);
+ return -ENOMEM;
+ }
+
+ netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64);
+
+ return 0;
+}
+
+/**
+ * igbvf_request_irq - initialize interrupts
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int igbvf_request_irq(struct igbvf_adapter *adapter)
+{
+ int err = -1;
+
+ /* igbvf supports msi-x only */
+ if (adapter->msix_entries)
+ err = igbvf_request_msix(adapter);
+
+ if (!err)
+ return err;
+
+ dev_err(&adapter->pdev->dev,
+ "Unable to allocate interrupt, Error: %d\n", err);
+
+ return err;
+}
+
+static void igbvf_free_irq(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int vector;
+
+ if (adapter->msix_entries) {
+ for (vector = 0; vector < 3; vector++)
+ free_irq(adapter->msix_entries[vector].vector, netdev);
+ }
+}
+
+/**
+ * igbvf_irq_disable - Mask off interrupt generation on the NIC
+ **/
+static void igbvf_irq_disable(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(EIMC, ~0);
+
+ if (adapter->msix_entries)
+ ew32(EIAC, 0);
+}
+
+/**
+ * igbvf_irq_enable - Enable default interrupt generation settings
+ **/
+static void igbvf_irq_enable(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ ew32(EIAC, adapter->eims_enable_mask);
+ ew32(EIAM, adapter->eims_enable_mask);
+ ew32(EIMS, adapter->eims_enable_mask);
+}
+
+/**
+ * igbvf_poll - NAPI Rx polling callback
+ * @napi: struct associated with this polling callback
+ * @budget: amount of packets driver is allowed to process this poll
+ **/
+static int igbvf_poll(struct napi_struct *napi, int budget)
+{
+ struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi);
+ struct igbvf_adapter *adapter = rx_ring->adapter;
+ struct e1000_hw *hw = &adapter->hw;
+ int work_done = 0;
+
+ igbvf_clean_rx_irq(adapter, &work_done, budget);
+
+ /* If not enough Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+
+ if (adapter->itr_setting & 3)
+ igbvf_set_itr(adapter);
+
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ ew32(EIMS, adapter->rx_ring->eims_value);
+ }
+
+ return work_done;
+}
+
+/**
+ * igbvf_set_rlpml - set receive large packet maximum length
+ * @adapter: board private structure
+ *
+ * Configure the maximum size of packets that will be received
+ */
+static void igbvf_set_rlpml(struct igbvf_adapter *adapter)
+{
+ int max_frame_size;
+ struct e1000_hw *hw = &adapter->hw;
+
+ max_frame_size = adapter->max_frame_size + VLAN_TAG_SIZE;
+ e1000_rlpml_set_vf(hw, max_frame_size);
+}
+
+static void igbvf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ if (hw->mac.ops.set_vfta(hw, vid, true))
+ dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid);
+ else
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void igbvf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ igbvf_irq_disable(adapter);
+
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ igbvf_irq_enable(adapter);
+
+ if (hw->mac.ops.set_vfta(hw, vid, false))
+ dev_err(&adapter->pdev->dev,
+ "Failed to remove vlan id %d\n", vid);
+ else
+ clear_bit(vid, adapter->active_vlans);
+}
+
+static void igbvf_restore_vlan(struct igbvf_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ igbvf_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+/**
+ * igbvf_configure_tx - Configure Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_tx(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ u64 tdba;
+ u32 txdctl, dca_txctrl;
+
+ /* disable transmits */
+ txdctl = er32(TXDCTL(0));
+ ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+ e1e_flush();
+ msleep(10);
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc));
+ tdba = tx_ring->dma;
+ ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
+ ew32(TDBAH(0), (tdba >> 32));
+ ew32(TDH(0), 0);
+ ew32(TDT(0), 0);
+ tx_ring->head = E1000_TDH(0);
+ tx_ring->tail = E1000_TDT(0);
+
+ /* Turn off Relaxed Ordering on head write-backs. The writebacks
+ * MUST be delivered in order or it will completely screw up
+ * our bookeeping.
+ */
+ dca_txctrl = er32(DCA_TXCTRL(0));
+ dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
+ ew32(DCA_TXCTRL(0), dca_txctrl);
+
+ /* enable transmits */
+ txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+ ew32(TXDCTL(0), txdctl);
+
+ /* Setup Transmit Descriptor Settings for eop descriptor */
+ adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS;
+
+ /* enable Report Status bit */
+ adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
+}
+
+/**
+ * igbvf_setup_srrctl - configure the receive control registers
+ * @adapter: Board private structure
+ **/
+static void igbvf_setup_srrctl(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ u32 srrctl = 0;
+
+ srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
+ E1000_SRRCTL_BSIZEHDR_MASK |
+ E1000_SRRCTL_BSIZEPKT_MASK);
+
+ /* Enable queue drop to avoid head of line blocking */
+ srrctl |= E1000_SRRCTL_DROP_EN;
+
+ /* Setup buffer sizes */
+ srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >>
+ E1000_SRRCTL_BSIZEPKT_SHIFT;
+
+ if (adapter->rx_buffer_len < 2048) {
+ adapter->rx_ps_hdr_size = 0;
+ srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ } else {
+ adapter->rx_ps_hdr_size = 128;
+ srrctl |= adapter->rx_ps_hdr_size <<
+ E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+ srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ }
+
+ ew32(SRRCTL(0), srrctl);
+}
+
+/**
+ * igbvf_configure_rx - Configure Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void igbvf_configure_rx(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct igbvf_ring *rx_ring = adapter->rx_ring;
+ u64 rdba;
+ u32 rdlen, rxdctl;
+
+ /* disable receives */
+ rxdctl = er32(RXDCTL(0));
+ ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+ e1e_flush();
+ msleep(10);
+
+ rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ rdba = rx_ring->dma;
+ ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
+ ew32(RDBAH(0), (rdba >> 32));
+ ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc));
+ rx_ring->head = E1000_RDH(0);
+ rx_ring->tail = E1000_RDT(0);
+ ew32(RDH(0), 0);
+ ew32(RDT(0), 0);
+
+ rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+ rxdctl &= 0xFFF00000;
+ rxdctl |= IGBVF_RX_PTHRESH;
+ rxdctl |= IGBVF_RX_HTHRESH << 8;
+ rxdctl |= IGBVF_RX_WTHRESH << 16;
+
+ igbvf_set_rlpml(adapter);
+
+ /* enable receives */
+ ew32(RXDCTL(0), rxdctl);
+}
+
+/**
+ * igbvf_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+static void igbvf_set_multi(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u8 *mta_list = NULL;
+ int i;
+
+ if (!netdev_mc_empty(netdev)) {
+ mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
+ if (!mta_list) {
+ dev_err(&adapter->pdev->dev,
+ "failed to allocate multicast filter list\n");
+ return;
+ }
+ }
+
+ /* prepare a packed array of only addresses. */
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
+
+ hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0);
+ kfree(mta_list);
+}
+
+/**
+ * igbvf_configure - configure the hardware for Rx and Tx
+ * @adapter: private board structure
+ **/
+static void igbvf_configure(struct igbvf_adapter *adapter)
+{
+ igbvf_set_multi(adapter->netdev);
+
+ igbvf_restore_vlan(adapter);
+
+ igbvf_configure_tx(adapter);
+ igbvf_setup_srrctl(adapter);
+ igbvf_configure_rx(adapter);
+ igbvf_alloc_rx_buffers(adapter->rx_ring,
+ igbvf_desc_unused(adapter->rx_ring));
+}
+
+/* igbvf_reset - bring the hardware into a known good state
+ *
+ * This function boots the hardware and enables some settings that
+ * require a configuration cycle of the hardware - those cannot be
+ * set/changed during runtime. After reset the device needs to be
+ * properly configured for Rx, Tx etc.
+ */
+static void igbvf_reset(struct igbvf_adapter *adapter)
+{
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* Allow time for pending master requests to run */
+ if (mac->ops.reset_hw(hw))
+ dev_err(&adapter->pdev->dev, "PF still resetting\n");
+
+ mac->ops.init_hw(hw);
+
+ if (is_valid_ether_addr(adapter->hw.mac.addr)) {
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ }
+
+ adapter->last_reset = jiffies;
+}
+
+int igbvf_up(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+ igbvf_configure(adapter);
+
+ clear_bit(__IGBVF_DOWN, &adapter->state);
+
+ napi_enable(&adapter->rx_ring->napi);
+ if (adapter->msix_entries)
+ igbvf_configure_msix(adapter);
+
+ /* Clear any pending interrupts. */
+ er32(EICR);
+ igbvf_irq_enable(adapter);
+
+ /* start the watchdog */
+ hw->mac.get_link_status = 1;
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+
+ return 0;
+}
+
+void igbvf_down(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 rxdctl, txdctl;
+
+ /*
+ * signal that we're down so the interrupt handler does not
+ * reschedule our watchdog timer
+ */
+ set_bit(__IGBVF_DOWN, &adapter->state);
+
+ /* disable receives in the hardware */
+ rxdctl = er32(RXDCTL(0));
+ ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+
+ netif_stop_queue(netdev);
+
+ /* disable transmits in the hardware */
+ txdctl = er32(TXDCTL(0));
+ ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+
+ /* flush both disables and wait for them to finish */
+ e1e_flush();
+ msleep(10);
+
+ napi_disable(&adapter->rx_ring->napi);
+
+ igbvf_irq_disable(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+
+ netif_carrier_off(netdev);
+
+ /* record the stats before reset*/
+ igbvf_update_stats(adapter);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ igbvf_reset(adapter);
+ igbvf_clean_tx_ring(adapter->tx_ring);
+ igbvf_clean_rx_ring(adapter->rx_ring);
+}
+
+void igbvf_reinit_locked(struct igbvf_adapter *adapter)
+{
+ might_sleep();
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+ igbvf_down(adapter);
+ igbvf_up(adapter);
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+}
+
+/**
+ * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * igbvf_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit igbvf_sw_init(struct igbvf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ s32 rc;
+
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
+ adapter->rx_ps_hdr_size = 0;
+ adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
+
+ adapter->tx_int_delay = 8;
+ adapter->tx_abs_int_delay = 32;
+ adapter->rx_int_delay = 0;
+ adapter->rx_abs_int_delay = 8;
+ adapter->itr_setting = 3;
+ adapter->itr = 20000;
+
+ /* Set various function pointers */
+ adapter->ei->init_ops(&adapter->hw);
+
+ rc = adapter->hw.mac.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ rc = adapter->hw.mbx.ops.init_params(&adapter->hw);
+ if (rc)
+ return rc;
+
+ igbvf_set_interrupt_capability(adapter);
+
+ if (igbvf_alloc_queues(adapter))
+ return -ENOMEM;
+
+ spin_lock_init(&adapter->tx_queue_lock);
+
+ /* Explicitly disable IRQ since the NIC can be in any state. */
+ igbvf_irq_disable(adapter);
+
+ spin_lock_init(&adapter->stats_lock);
+
+ set_bit(__IGBVF_DOWN, &adapter->state);
+ return 0;
+}
+
+static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+
+ adapter->stats.last_gprc = er32(VFGPRC);
+ adapter->stats.last_gorc = er32(VFGORC);
+ adapter->stats.last_gptc = er32(VFGPTC);
+ adapter->stats.last_gotc = er32(VFGOTC);
+ adapter->stats.last_mprc = er32(VFMPRC);
+ adapter->stats.last_gotlbc = er32(VFGOTLBC);
+ adapter->stats.last_gptlbc = er32(VFGPTLBC);
+ adapter->stats.last_gorlbc = er32(VFGORLBC);
+ adapter->stats.last_gprlbc = er32(VFGPRLBC);
+
+ adapter->stats.base_gprc = er32(VFGPRC);
+ adapter->stats.base_gorc = er32(VFGORC);
+ adapter->stats.base_gptc = er32(VFGPTC);
+ adapter->stats.base_gotc = er32(VFGOTC);
+ adapter->stats.base_mprc = er32(VFMPRC);
+ adapter->stats.base_gotlbc = er32(VFGOTLBC);
+ adapter->stats.base_gptlbc = er32(VFGPTLBC);
+ adapter->stats.base_gorlbc = er32(VFGORLBC);
+ adapter->stats.base_gprlbc = er32(VFGPRLBC);
+}
+
+/**
+ * igbvf_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int igbvf_open(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__IGBVF_TESTING, &adapter->state))
+ return -EBUSY;
+
+ /* allocate transmit descriptors */
+ err = igbvf_setup_tx_resources(adapter, adapter->tx_ring);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = igbvf_setup_rx_resources(adapter, adapter->rx_ring);
+ if (err)
+ goto err_setup_rx;
+
+ /*
+ * before we allocate an interrupt, we must be ready to handle it.
+ * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
+ * as soon as we call pci_request_irq, so we have to setup our
+ * clean_rx handler before we do so.
+ */
+ igbvf_configure(adapter);
+
+ err = igbvf_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ /* From here on the code is the same as igbvf_up() */
+ clear_bit(__IGBVF_DOWN, &adapter->state);
+
+ napi_enable(&adapter->rx_ring->napi);
+
+ /* clear any pending interrupts */
+ er32(EICR);
+
+ igbvf_irq_enable(adapter);
+
+ /* start the watchdog */
+ hw->mac.get_link_status = 1;
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
+
+ return 0;
+
+err_req_irq:
+ igbvf_free_rx_resources(adapter->rx_ring);
+err_setup_rx:
+ igbvf_free_tx_resources(adapter->tx_ring);
+err_setup_tx:
+ igbvf_reset(adapter);
+
+ return err;
+}
+
+/**
+ * igbvf_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int igbvf_close(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
+ igbvf_down(adapter);
+
+ igbvf_free_irq(adapter);
+
+ igbvf_free_tx_resources(adapter->tx_ring);
+ igbvf_free_rx_resources(adapter->rx_ring);
+
+ return 0;
+}
+/**
+ * igbvf_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igbvf_set_mac(struct net_device *netdev, void *p)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
+
+ if (memcmp(addr->sa_data, hw->mac.addr, 6))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ return 0;
+}
+
+#define UPDATE_VF_COUNTER(reg, name) \
+ { \
+ u32 current_counter = er32(reg); \
+ if (current_counter < adapter->stats.last_##name) \
+ adapter->stats.name += 0x100000000LL; \
+ adapter->stats.last_##name = current_counter; \
+ adapter->stats.name &= 0xFFFFFFFF00000000LL; \
+ adapter->stats.name |= current_counter; \
+ }
+
+/**
+ * igbvf_update_stats - Update the board statistics counters
+ * @adapter: board private structure
+**/
+void igbvf_update_stats(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /*
+ * Prevent stats update while adapter is being reset, link is down
+ * or if the pci connection is down.
+ */
+ if (adapter->link_speed == 0)
+ return;
+
+ if (test_bit(__IGBVF_RESETTING, &adapter->state))
+ return;
+
+ if (pci_channel_offline(pdev))
+ return;
+
+ UPDATE_VF_COUNTER(VFGPRC, gprc);
+ UPDATE_VF_COUNTER(VFGORC, gorc);
+ UPDATE_VF_COUNTER(VFGPTC, gptc);
+ UPDATE_VF_COUNTER(VFGOTC, gotc);
+ UPDATE_VF_COUNTER(VFMPRC, mprc);
+ UPDATE_VF_COUNTER(VFGOTLBC, gotlbc);
+ UPDATE_VF_COUNTER(VFGPTLBC, gptlbc);
+ UPDATE_VF_COUNTER(VFGORLBC, gorlbc);
+ UPDATE_VF_COUNTER(VFGPRLBC, gprlbc);
+
+ /* Fill out the OS statistics structure */
+ adapter->net_stats.multicast = adapter->stats.mprc;
+}
+
+static void igbvf_print_link_info(struct igbvf_adapter *adapter)
+{
+ dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n",
+ adapter->link_speed,
+ ((adapter->link_duplex == FULL_DUPLEX) ?
+ "Full Duplex" : "Half Duplex"));
+}
+
+static bool igbvf_has_link(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ s32 ret_val = E1000_SUCCESS;
+ bool link_active;
+
+ /* If interface is down, stay link down */
+ if (test_bit(__IGBVF_DOWN, &adapter->state))
+ return false;
+
+ ret_val = hw->mac.ops.check_for_link(hw);
+ link_active = !hw->mac.get_link_status;
+
+ /* if check for link returns error we will need to reset */
+ if (ret_val && time_after(jiffies, adapter->last_reset + (10 * HZ)))
+ schedule_work(&adapter->reset_task);
+
+ return link_active;
+}
+
+/**
+ * igbvf_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void igbvf_watchdog(unsigned long data)
+{
+ struct igbvf_adapter *adapter = (struct igbvf_adapter *) data;
+
+ /* Do the rest outside of interrupt context */
+ schedule_work(&adapter->watchdog_task);
+}
+
+static void igbvf_watchdog_task(struct work_struct *work)
+{
+ struct igbvf_adapter *adapter = container_of(work,
+ struct igbvf_adapter,
+ watchdog_task);
+ struct net_device *netdev = adapter->netdev;
+ struct e1000_mac_info *mac = &adapter->hw.mac;
+ struct igbvf_ring *tx_ring = adapter->tx_ring;
+ struct e1000_hw *hw = &adapter->hw;
+ u32 link;
+ int tx_pending = 0;
+
+ link = igbvf_has_link(adapter);
+
+ if (link) {
+ if (!netif_carrier_ok(netdev)) {
+ mac->ops.get_link_up_info(&adapter->hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
+ igbvf_print_link_info(adapter);
+
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ dev_info(&adapter->pdev->dev, "Link is Down\n");
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ }
+ }
+
+ if (netif_carrier_ok(netdev)) {
+ igbvf_update_stats(adapter);
+ } else {
+ tx_pending = (igbvf_desc_unused(tx_ring) + 1 <
+ tx_ring->count);
+ if (tx_pending) {
+ /*
+ * We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+ }
+ }
+
+ /* Cause software interrupt to ensure Rx ring is cleaned */
+ ew32(EICS, adapter->rx_ring->eims_value);
+
+ /* Reset the timer */
+ if (!test_bit(__IGBVF_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + (2 * HZ)));
+}
+
+#define IGBVF_TX_FLAGS_CSUM 0x00000001
+#define IGBVF_TX_FLAGS_VLAN 0x00000002
+#define IGBVF_TX_FLAGS_TSO 0x00000004
+#define IGBVF_TX_FLAGS_IPV4 0x00000008
+#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IGBVF_TX_FLAGS_VLAN_SHIFT 16
+
+static int igbvf_tso(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ int err;
+ struct igbvf_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+ u32 mss_l4len_idx, l4len;
+ *hdr_len = 0;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err) {
+ dev_err(&adapter->pdev->dev,
+ "igbvf_tso returning an error\n");
+ return err;
+ }
+ }
+
+ l4len = tcp_hdrlen(skb);
+ *hdr_len += l4len;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
+ /* VLAN MACLEN IPLEN */
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ *hdr_len += skb_network_offset(skb);
+ info |= (skb_transport_header(skb) - skb_network_header(skb));
+ *hdr_len += (skb_transport_header(skb) - skb_network_header(skb));
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
+ mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
+
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+ context_desc->seqnum_seed = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_ring->next_to_use = i;
+
+ return true;
+}
+
+static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags)
+{
+ struct e1000_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ struct igbvf_buffer *buffer_info;
+ u32 info = 0, tu_cmd = 0;
+
+ if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
+ (tx_flags & IGBVF_TX_FLAGS_VLAN)) {
+ i = tx_ring->next_to_use;
+ buffer_info = &tx_ring->buffer_info[i];
+ context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
+
+ info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ info |= (skb_transport_header(skb) -
+ skb_network_header(skb));
+
+
+ context_desc->vlan_macip_lens = cpu_to_le32(info);
+
+ tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
+ tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ case __constant_htons(ETH_P_IPV6):
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ default:
+ break;
+ }
+ }
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
+ context_desc->seqnum_seed = 0;
+ context_desc->mss_l4len_idx = 0;
+
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->dma = 0;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+static int igbvf_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* there is enough descriptors then we don't need to worry */
+ if (igbvf_desc_unused(adapter->tx_ring) >= size)
+ return 0;
+
+ netif_stop_queue(netdev);
+
+ smp_mb();
+
+ /* We need to check again just in case room has been made available */
+ if (igbvf_desc_unused(adapter->tx_ring) < size)
+ return -EBUSY;
+
+ netif_wake_queue(netdev);
+
+ ++adapter->restart_queue;
+ return 0;
+}
+
+#define IGBVF_MAX_TXD_PWR 16
+#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR)
+
+static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ struct sk_buff *skb,
+ unsigned int first)
+{
+ struct igbvf_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned int len = skb_headlen(skb);
+ unsigned int count = 0, i;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ /* set time_stamp *before* dma to help avoid a possible race */
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+
+
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
+ buffer_info->length = len;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->next_to_watch = i;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma = dma_map_page(&pdev->dev,
+ frag->page,
+ frag->page_offset,
+ len,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ }
+
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return ++count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+
+ /* clear timestamp and dma mappings for failed buffer_info mapping */
+ buffer_info->dma = 0;
+ buffer_info->time_stamp = 0;
+ buffer_info->length = 0;
+ buffer_info->next_to_watch = 0;
+ buffer_info->mapped_as_page = false;
+ if (count)
+ count--;
+
+ /* clear timestamp and dma mappings for remaining portion of packet */
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ igbvf_put_txbuf(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
+ struct igbvf_ring *tx_ring,
+ int tx_flags, int count, u32 paylen,
+ u8 hdr_len)
+{
+ union e1000_adv_tx_desc *tx_desc = NULL;
+ struct igbvf_buffer *buffer_info;
+ u32 olinfo_status = 0, cmd_type_len;
+ unsigned int i;
+
+ cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
+ E1000_ADVTXD_DCMD_DEXT);
+
+ if (tx_flags & IGBVF_TX_FLAGS_VLAN)
+ cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IGBVF_TX_FLAGS_TSO) {
+ cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
+
+ /* insert tcp checksum */
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+
+ /* insert ip checksum */
+ if (tx_flags & IGBVF_TX_FLAGS_IPV4)
+ olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
+
+ } else if (tx_flags & IGBVF_TX_FLAGS_CSUM) {
+ olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
+ }
+
+ olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
+
+ i = tx_ring->next_to_use;
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+ /* we need this if more than one processor can write to our tail
+ * at a time, it syncronizes IO on IA64/Altix systems */
+ mmiowb();
+}
+
+static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
+ struct net_device *netdev,
+ struct igbvf_ring *tx_ring)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ unsigned int first, tx_flags = 0;
+ u8 hdr_len = 0;
+ int count = 0;
+ int tso = 0;
+
+ if (test_bit(__IGBVF_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ /*
+ * need: count + 4 desc gap to keep tail from touching
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for skb->data,
+ * + 1 desc for context descriptor,
+ * head, otherwise try next time
+ */
+ if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) {
+ /* this is a hard error */
+ return NETDEV_TX_BUSY;
+ }
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= IGBVF_TX_FLAGS_VLAN;
+ tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT);
+ }
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= IGBVF_TX_FLAGS_IPV4;
+
+ first = tx_ring->next_to_use;
+
+ tso = skb_is_gso(skb) ?
+ igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0;
+ if (unlikely(tso < 0)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (tso)
+ tx_flags |= IGBVF_TX_FLAGS_TSO;
+ else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL))
+ tx_flags |= IGBVF_TX_FLAGS_CSUM;
+
+ /*
+ * count reflects descriptors mapped, if 0 then mapping error
+ * has occurred and we need to rewind the descriptor queue
+ */
+ count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);
+
+ if (count) {
+ igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
+ skb->len, hdr_len);
+ /* Make sure there is space in the ring for the next send. */
+ igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static netdev_tx_t igbvf_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct igbvf_ring *tx_ring;
+
+ if (test_bit(__IGBVF_DOWN, &adapter->state)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ tx_ring = &adapter->tx_ring[0];
+
+ return igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
+}
+
+/**
+ * igbvf_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void igbvf_tx_timeout(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ adapter->tx_timeout_count++;
+ schedule_work(&adapter->reset_task);
+}
+
+static void igbvf_reset_task(struct work_struct *work)
+{
+ struct igbvf_adapter *adapter;
+ adapter = container_of(work, struct igbvf_adapter, reset_task);
+
+ igbvf_reinit_locked(adapter);
+}
+
+/**
+ * igbvf_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+static struct net_device_stats *igbvf_get_stats(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ /* only return the current stats */
+ return &adapter->net_stats;
+}
+
+/**
+ * igbvf_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+ return -EINVAL;
+ }
+
+#define MAX_STD_JUMBO_FRAME_SIZE 9234
+ if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
+ dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+ return -EINVAL;
+ }
+
+ while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
+ msleep(1);
+ /* igbvf_down has a dependency on max_frame_size */
+ adapter->max_frame_size = max_frame;
+ if (netif_running(netdev))
+ igbvf_down(adapter);
+
+ /*
+ * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
+ * means we reserve 2 more, this pushes us to allocate from the next
+ * larger slab size.
+ * i.e. RXBUFFER_2048 --> size-4096 slab
+ * However with the new *_jumbo_rx* routines, jumbo receives will use
+ * fragmented skbs
+ */
+
+ if (max_frame <= 1024)
+ adapter->rx_buffer_len = 1024;
+ else if (max_frame <= 2048)
+ adapter->rx_buffer_len = 2048;
+ else
+#if (PAGE_SIZE / 2) > 16384
+ adapter->rx_buffer_len = 16384;
+#else
+ adapter->rx_buffer_len = PAGE_SIZE / 2;
+#endif
+
+
+ /* adjust allocation if LPE protects us, and we aren't using SBP */
+ if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
+ (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
+ adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN +
+ ETH_FCS_LEN;
+
+ dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ igbvf_up(adapter);
+ else
+ igbvf_reset(adapter);
+
+ clear_bit(__IGBVF_RESETTING, &adapter->state);
+
+ return 0;
+}
+
+static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
+{
+ switch (cmd) {
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
+ igbvf_down(adapter);
+ igbvf_free_irq(adapter);
+ }
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+#endif
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int igbvf_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ u32 err;
+
+ pci_restore_state(pdev);
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+
+ if (netif_running(netdev)) {
+ err = igbvf_request_irq(adapter);
+ if (err)
+ return err;
+ }
+
+ igbvf_reset(adapter);
+
+ if (netif_running(netdev))
+ igbvf_up(adapter);
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif
+
+static void igbvf_shutdown(struct pci_dev *pdev)
+{
+ igbvf_suspend(pdev, PMSG_SUSPEND);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void igbvf_netpoll(struct net_device *netdev)
+{
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ disable_irq(adapter->pdev->irq);
+
+ igbvf_clean_tx_irq(adapter->tx_ring);
+
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * igbvf_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ igbvf_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * igbvf_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot. Implementation
+ * resembles the first-half of the igbvf_resume routine.
+ */
+static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device_mem(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+
+ igbvf_reset(adapter);
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * igbvf_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation. Implementation resembles the
+ * second-half of the igbvf_resume routine.
+ */
+static void igbvf_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (igbvf_up(adapter)) {
+ dev_err(&pdev->dev,
+ "can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+static void igbvf_print_device_info(struct igbvf_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n");
+ dev_info(&pdev->dev, "Address: %pM\n", netdev->dev_addr);
+ dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type);
+}
+
+static const struct net_device_ops igbvf_netdev_ops = {
+ .ndo_open = igbvf_open,
+ .ndo_stop = igbvf_close,
+ .ndo_start_xmit = igbvf_xmit_frame,
+ .ndo_get_stats = igbvf_get_stats,
+ .ndo_set_multicast_list = igbvf_set_multi,
+ .ndo_set_mac_address = igbvf_set_mac,
+ .ndo_change_mtu = igbvf_change_mtu,
+ .ndo_do_ioctl = igbvf_ioctl,
+ .ndo_tx_timeout = igbvf_tx_timeout,
+ .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = igbvf_netpoll,
+#endif
+};
+
+/**
+ * igbvf_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in igbvf_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * igbvf_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit igbvf_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct igbvf_adapter *adapter;
+ struct e1000_hw *hw;
+ const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data];
+
+ static int cards_found;
+ int err, pci_using_dac;
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ }
+
+ err = pci_request_regions(pdev, igbvf_driver_name);
+ if (err)
+ goto err_pci_reg;
+
+ pci_set_master(pdev);
+
+ err = -ENOMEM;
+ netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
+ if (!netdev)
+ goto err_alloc_etherdev;
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ hw = &adapter->hw;
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->ei = ei;
+ adapter->pba = ei->pba;
+ adapter->flags = ei->flags;
+ adapter->hw.back = adapter;
+ adapter->hw.mac.type = ei->mac;
+ adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+ hw->revision_id = pdev->revision;
+
+ err = -EIO;
+ adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+
+ if (!adapter->hw.hw_addr)
+ goto err_ioremap;
+
+ if (ei->get_variants) {
+ err = ei->get_variants(adapter);
+ if (err)
+ goto err_ioremap;
+ }
+
+ /* setup adapter struct */
+ err = igbvf_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ /* construct the net_device struct */
+ netdev->netdev_ops = &igbvf_netdev_ops;
+
+ igbvf_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found++;
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ netdev->features |= NETIF_F_IPV6_CSUM;
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ /*reset the controller to put the device in a known good state */
+ err = hw->mac.ops.reset_hw(hw);
+ if (err) {
+ dev_info(&pdev->dev,
+ "PF still in reset state, assigning new address."
+ " Is the PF interface up?\n");
+ dev_hw_addr_random(adapter->netdev, hw->mac.addr);
+ } else {
+ err = hw->mac.ops.read_mac_addr(hw);
+ if (err) {
+ dev_err(&pdev->dev, "Error reading MAC address\n");
+ goto err_hw_init;
+ }
+ }
+
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
+ netdev->dev_addr);
+ err = -EIO;
+ goto err_hw_init;
+ }
+
+ setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->reset_task, igbvf_reset_task);
+ INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task);
+
+ /* ring size defaults */
+ adapter->rx_ring->count = 1024;
+ adapter->tx_ring->count = 1024;
+
+ /* reset the hardware with the new settings */
+ igbvf_reset(adapter);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_hw_init;
+
+ /* tell the stack to leave us alone until igbvf_open() is called */
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ igbvf_print_device_info(adapter);
+
+ igbvf_initialize_last_counter_stats(adapter);
+
+ return 0;
+
+err_hw_init:
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+err_sw_init:
+ igbvf_reset_interrupt_capability(adapter);
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * igbvf_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * igbvf_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit igbvf_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct igbvf_adapter *adapter = netdev_priv(netdev);
+ struct e1000_hw *hw = &adapter->hw;
+
+ /*
+ * The watchdog timer may be rescheduled, so explicitly
+ * disable it from being rescheduled.
+ */
+ set_bit(__IGBVF_DOWN, &adapter->state);
+ del_timer_sync(&adapter->watchdog_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+ unregister_netdev(netdev);
+
+ igbvf_reset_interrupt_capability(adapter);
+
+ /*
+ * it is important to delete the napi struct prior to freeing the
+ * rx ring so that you do not end up with null pointer refs
+ */
+ netif_napi_del(&adapter->rx_ring->napi);
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ iounmap(hw->hw_addr);
+ if (hw->flash_address)
+ iounmap(hw->flash_address);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+/* PCI Error Recovery (ERS) */
+static struct pci_error_handlers igbvf_err_handler = {
+ .error_detected = igbvf_io_error_detected,
+ .slot_reset = igbvf_io_slot_reset,
+ .resume = igbvf_io_resume,
+};
+
+static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = {
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
+ { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf },
+ { } /* terminate list */
+};
+MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
+
+/* PCI Device API Driver */
+static struct pci_driver igbvf_driver = {
+ .name = igbvf_driver_name,
+ .id_table = igbvf_pci_tbl,
+ .probe = igbvf_probe,
+ .remove = __devexit_p(igbvf_remove),
+#ifdef CONFIG_PM
+ /* Power Management Hooks */
+ .suspend = igbvf_suspend,
+ .resume = igbvf_resume,
+#endif
+ .shutdown = igbvf_shutdown,
+ .err_handler = &igbvf_err_handler
+};
+
+/**
+ * igbvf_init_module - Driver Registration Routine
+ *
+ * igbvf_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init igbvf_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "%s - version %s\n",
+ igbvf_driver_string, igbvf_driver_version);
+ printk(KERN_INFO "%s\n", igbvf_copyright);
+
+ ret = pci_register_driver(&igbvf_driver);
+
+ return ret;
+}
+module_init(igbvf_init_module);
+
+/**
+ * igbvf_exit_module - Driver Exit Cleanup Routine
+ *
+ * igbvf_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit igbvf_exit_module(void)
+{
+ pci_unregister_driver(&igbvf_driver);
+}
+module_exit(igbvf_exit_module);
+
+
+MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
+MODULE_DESCRIPTION("Intel(R) 82576 Virtual Function Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* netdev.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_REGS_H_
+#define _E1000_REGS_H_
+
+#define E1000_CTRL 0x00000 /* Device Control - RW */
+#define E1000_STATUS 0x00008 /* Device Status - RO */
+#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
+#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
+#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
+#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
+#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
+#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
+#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
+#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
+#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
+#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
+/*
+ * Convenience macros
+ *
+ * Note: "_n" is the queue number of the register to be written to.
+ *
+ * Example usage:
+ * E1000_RDBAL_REG(current_rx_queue)
+ */
+#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
+ (0x0C000 + ((_n) * 0x40)))
+#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
+ (0x0C004 + ((_n) * 0x40)))
+#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
+ (0x0C008 + ((_n) * 0x40)))
+#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
+ (0x0C00C + ((_n) * 0x40)))
+#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
+ (0x0C010 + ((_n) * 0x40)))
+#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
+ (0x0C018 + ((_n) * 0x40)))
+#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
+ (0x0C028 + ((_n) * 0x40)))
+#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
+ (0x0E000 + ((_n) * 0x40)))
+#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
+ (0x0E004 + ((_n) * 0x40)))
+#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
+ (0x0E008 + ((_n) * 0x40)))
+#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
+ (0x0E010 + ((_n) * 0x40)))
+#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
+ (0x0E018 + ((_n) * 0x40)))
+#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
+ (0x0E028 + ((_n) * 0x40)))
+#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
+#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
+#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x054E0 + ((_i - 16) * 8)))
+#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x054E4 + ((_i - 16) * 8)))
+
+/* Statistics registers */
+#define E1000_VFGPRC 0x00F10
+#define E1000_VFGORC 0x00F18
+#define E1000_VFMPRC 0x00F3C
+#define E1000_VFGPTC 0x00F14
+#define E1000_VFGOTC 0x00F34
+#define E1000_VFGOTLBC 0x00F50
+#define E1000_VFGPTLBC 0x00F44
+#define E1000_VFGORLBC 0x00F48
+#define E1000_VFGPRLBC 0x00F40
+
+/* These act per VF so an array friendly macro is used */
+#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
+#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
+
+/* Define macros for handling registers */
+#define er32(reg) readl(hw->hw_addr + E1000_##reg)
+#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
+#define array_er32(reg, offset) \
+ readl(hw->hw_addr + E1000_##reg + (offset << 2))
+#define array_ew32(reg, offset, val) \
+ writel((val), hw->hw_addr + E1000_##reg + (offset << 2))
+#define e1e_flush() er32(STATUS)
+
+#endif
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "vf.h"
+
+static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
+static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex);
+static s32 e1000_init_hw_vf(struct e1000_hw *hw);
+static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
+
+static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
+ u32, u32, u32);
+static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
+static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
+static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
+
+/**
+ * e1000_init_mac_params_vf - Inits MAC params
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+
+ /* VF's have no MTA Registers - PF feature only */
+ mac->mta_reg_count = 128;
+ /* VF's have no access to RAR entries */
+ mac->rar_entry_count = 1;
+
+ /* Function pointers */
+ /* reset */
+ mac->ops.reset_hw = e1000_reset_hw_vf;
+ /* hw initialization */
+ mac->ops.init_hw = e1000_init_hw_vf;
+ /* check for link */
+ mac->ops.check_for_link = e1000_check_for_link_vf;
+ /* link info */
+ mac->ops.get_link_up_info = e1000_get_link_up_info_vf;
+ /* multicast address update */
+ mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf;
+ /* set mac address */
+ mac->ops.rar_set = e1000_rar_set_vf;
+ /* read mac address */
+ mac->ops.read_mac_addr = e1000_read_mac_addr_vf;
+ /* set vlan filter table array */
+ mac->ops.set_vfta = e1000_set_vfta_vf;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_function_pointers_vf - Inits function pointers
+ * @hw: pointer to the HW structure
+ **/
+void e1000_init_function_pointers_vf(struct e1000_hw *hw)
+{
+ hw->mac.ops.init_params = e1000_init_mac_params_vf;
+ hw->mbx.ops.init_params = e1000_init_mbx_params_vf;
+}
+
+/**
+ * e1000_get_link_up_info_vf - Gets link info.
+ * @hw: pointer to the HW structure
+ * @speed: pointer to 16 bit value to store link speed.
+ * @duplex: pointer to 16 bit value to store duplex.
+ *
+ * Since we cannot read the PHY and get accurate link info, we must rely upon
+ * the status register's data which is often stale and inaccurate.
+ **/
+static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
+ u16 *duplex)
+{
+ s32 status;
+
+ status = er32(STATUS);
+ if (status & E1000_STATUS_SPEED_1000)
+ *speed = SPEED_1000;
+ else if (status & E1000_STATUS_SPEED_100)
+ *speed = SPEED_100;
+ else
+ *speed = SPEED_10;
+
+ if (status & E1000_STATUS_FD)
+ *duplex = FULL_DUPLEX;
+ else
+ *duplex = HALF_DUPLEX;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_reset_hw_vf - Resets the HW
+ * @hw: pointer to the HW structure
+ *
+ * VF's provide a function level reset. This is done using bit 26 of ctrl_reg.
+ * This is all the reset we can perform on a VF.
+ **/
+static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 timeout = E1000_VF_INIT_TIMEOUT;
+ u32 ret_val = -E1000_ERR_MAC_INIT;
+ u32 msgbuf[3];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+ u32 ctrl;
+
+ /* assert vf queue/interrupt reset */
+ ctrl = er32(CTRL);
+ ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+ /* we cannot initialize while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw) && timeout) {
+ timeout--;
+ udelay(5);
+ }
+
+ if (timeout) {
+ /* mailbox timeout can now become active */
+ mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
+
+ /* notify pf of vf reset completion */
+ msgbuf[0] = E1000_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1);
+
+ msleep(10);
+
+ /* set our "perm_addr" based on info provided by PF */
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+ if (!ret_val) {
+ if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
+ memcpy(hw->mac.perm_addr, addr, 6);
+ else
+ ret_val = -E1000_ERR_MAC_INIT;
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_vf - Inits the HW
+ * @hw: pointer to the HW structure
+ *
+ * Not much to do here except clear the PF Reset indication if there is one.
+ **/
+static s32 e1000_init_hw_vf(struct e1000_hw *hw)
+{
+ /* attempt to set and restore our mac address */
+ e1000_rar_set_vf(hw, hw->mac.addr, 0);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_hash_mc_addr_vf - Generate a multicast hash value
+ * @hw: pointer to the HW structure
+ * @mc_addr: pointer to a multicast address
+ *
+ * Generates a multicast address hash value which is used to determine
+ * the multicast filter table array address and new table value. See
+ * e1000_mta_set_generic()
+ **/
+static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
+{
+ u32 hash_value, hash_mask;
+ u8 bit_shift = 0;
+
+ /* Register count multiplied by bits per register */
+ hash_mask = (hw->mac.mta_reg_count * 32) - 1;
+
+ /*
+ * The bit_shift is the number of left-shifts
+ * where 0xFF would still fall within the hash mask.
+ */
+ while (hash_mask >> bit_shift != 0xFF)
+ bit_shift++;
+
+ hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
+ (((u16) mc_addr[5]) << bit_shift)));
+
+ return hash_value;
+}
+
+/**
+ * e1000_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @mc_addr_list: array of multicast addresses to program
+ * @mc_addr_count: number of multicast addresses to program
+ * @rar_used_count: the first RAR register free to program
+ * @rar_count: total number of supported Receive Address Registers
+ *
+ * Updates the Receive Address Registers and Multicast Table Array.
+ * The caller must have a packed mc_addr_list of multicast addresses.
+ * The parameter rar_count will usually be hw->mac.rar_entry_count
+ * unless there are workarounds that change this.
+ **/
+static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
+ u8 *mc_addr_list, u32 mc_addr_count,
+ u32 rar_used_count, u32 rar_count)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[E1000_VFMAILBOX_SIZE];
+ u16 *hash_list = (u16 *)&msgbuf[1];
+ u32 hash_value;
+ u32 cnt, i;
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
+ msgbuf[0] = E1000_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT;
+
+ for (i = 0; i < cnt; i++) {
+ hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list);
+ hash_list[i] = hash_value & 0x0FFFF;
+ mc_addr_list += ETH_ADDR_LEN;
+ }
+
+ mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE);
+}
+
+/**
+ * e1000_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vid: determines the vfta register and bit to set/unset
+ * @set: if true then set bit, else clear bit
+ **/
+static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+ s32 err;
+
+ msgbuf[0] = E1000_VF_SET_VLAN;
+ msgbuf[1] = vid;
+ /* Setting the 8 bit field MSG INFO to true indicates "add" */
+ if (set)
+ msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT;
+
+ mbx->ops.write_posted(hw, msgbuf, 2);
+
+ err = mbx->ops.read_posted(hw, msgbuf, 2);
+
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
+ /* if nacked the vlan was rejected */
+ if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
+ err = -E1000_ERR_MAC_INIT;
+
+ return err;
+}
+
+/** e1000_rlpml_set_vf - Set the maximum receive packet length
+ * @hw: pointer to the HW structure
+ * @max_size: value to assign to max frame size
+ **/
+void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = E1000_VF_SET_LPE;
+ msgbuf[1] = max_size;
+
+ mbx->ops.write_posted(hw, msgbuf, 2);
+}
+
+/**
+ * e1000_rar_set_vf - set device MAC address
+ * @hw: pointer to the HW structure
+ * @addr: pointer to the receive address
+ * @index receive address array register
+ **/
+static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, 12);
+ msgbuf[0] = E1000_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
+ e1000_read_mac_addr_vf(hw);
+}
+
+/**
+ * e1000_read_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < ETH_ADDR_LEN; i++)
+ hw->mac.addr[i] = hw->mac.perm_addr[i];
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_check_for_link_vf - Check for link for a virtual interface
+ * @hw: pointer to the HW structure
+ *
+ * Checks to see if the underlying PF is still talking to the VF and
+ * if it is then it reports the link state to the hardware, otherwise
+ * it reports link down and returns an error.
+ **/
+static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
+{
+ struct e1000_mbx_info *mbx = &hw->mbx;
+ struct e1000_mac_info *mac = &hw->mac;
+ s32 ret_val = E1000_SUCCESS;
+ u32 in_msg = 0;
+
+ /*
+ * We only want to run this if there has been a rst asserted.
+ * in this case that could mean a link change, device reset,
+ * or a virtual function reset
+ */
+
+ /* If we were hit with a reset or timeout drop the link */
+ if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
+ mac->get_link_status = true;
+
+ if (!mac->get_link_status)
+ goto out;
+
+ /* if link status is down no point in checking to see if pf is up */
+ if (!(er32(STATUS) & E1000_STATUS_LU))
+ goto out;
+
+ /* if the read failed it could just be a mailbox collision, best wait
+ * until we are called again and don't report an error */
+ if (mbx->ops.read(hw, &in_msg, 1))
+ goto out;
+
+ /* if incoming message isn't clear to send we are waiting on response */
+ if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
+ /* message is not CTS and is NACK we must have lost CTS status */
+ if (in_msg & E1000_VT_MSGTYPE_NACK)
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* the pf is talking, if we timed out in the past we reinit */
+ if (!mbx->timeout) {
+ ret_val = -E1000_ERR_MAC_INIT;
+ goto out;
+ }
+
+ /* if we passed all the tests above then the link is up and we no
+ * longer need to check for link */
+ mac->get_link_status = false;
+
+out:
+ return ret_val;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel(R) 82576 Virtual Function Linux driver
+ Copyright(c) 2009 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _E1000_VF_H_
+#define _E1000_VF_H_
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+
+#include "regs.h"
+#include "defines.h"
+
+struct e1000_hw;
+
+#define E1000_DEV_ID_82576_VF 0x10CA
+#define E1000_DEV_ID_I350_VF 0x1520
+#define E1000_REVISION_0 0
+#define E1000_REVISION_1 1
+#define E1000_REVISION_2 2
+#define E1000_REVISION_3 3
+#define E1000_REVISION_4 4
+
+#define E1000_FUNC_0 0
+#define E1000_FUNC_1 1
+
+/*
+ * Receive Address Register Count
+ * Number of high/low register pairs in the RAR. The RAR (Receive Address
+ * Registers) holds the directed and multicast addresses that we monitor.
+ * These entries are also used for MAC-based filtering.
+ */
+#define E1000_RAR_ENTRIES_VF 1
+
+/* Receive Descriptor - Advanced */
+union e1000_adv_rx_desc {
+ struct {
+ u64 pkt_addr; /* Packet buffer address */
+ u64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ u32 data;
+ struct {
+ u16 pkt_info; /* RSS/Packet type */
+ u16 hdr_info; /* Split Header,
+ * hdr buffer length */
+ } hs_rss;
+ } lo_dword;
+ union {
+ u32 rss; /* RSS Hash */
+ struct {
+ u16 ip_id; /* IP id */
+ u16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ u32 status_error; /* ext status/error */
+ u16 length; /* Packet length */
+ u16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
+#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
+
+/* Transmit Descriptor - Advanced */
+union e1000_adv_tx_desc {
+ struct {
+ u64 buffer_addr; /* Address of descriptor's data buf */
+ u32 cmd_type_len;
+ u32 olinfo_status;
+ } read;
+ struct {
+ u64 rsvd; /* Reserved */
+ u32 nxtseq_seed;
+ u32 status;
+ } wb;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
+#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
+#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
+#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
+#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
+#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+
+/* Context descriptors */
+struct e1000_adv_tx_context_desc {
+ u32 vlan_macip_lens;
+ u32 seqnum_seed;
+ u32 type_tucmd_mlhl;
+ u32 mss_l4len_idx;
+};
+
+#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+enum e1000_mac_type {
+ e1000_undefined = 0,
+ e1000_vfadapt,
+ e1000_vfadapt_i350,
+ e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
+};
+
+struct e1000_vf_stats {
+ u64 base_gprc;
+ u64 base_gptc;
+ u64 base_gorc;
+ u64 base_gotc;
+ u64 base_mprc;
+ u64 base_gotlbc;
+ u64 base_gptlbc;
+ u64 base_gorlbc;
+ u64 base_gprlbc;
+
+ u32 last_gprc;
+ u32 last_gptc;
+ u32 last_gorc;
+ u32 last_gotc;
+ u32 last_mprc;
+ u32 last_gotlbc;
+ u32 last_gptlbc;
+ u32 last_gorlbc;
+ u32 last_gprlbc;
+
+ u64 gprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 mprc;
+ u64 gotlbc;
+ u64 gptlbc;
+ u64 gorlbc;
+ u64 gprlbc;
+};
+
+#include "mbx.h"
+
+struct e1000_mac_operations {
+ /* Function pointers for the MAC. */
+ s32 (*init_params)(struct e1000_hw *);
+ s32 (*check_for_link)(struct e1000_hw *);
+ void (*clear_vfta)(struct e1000_hw *);
+ s32 (*get_bus_info)(struct e1000_hw *);
+ s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
+ void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32);
+ s32 (*reset_hw)(struct e1000_hw *);
+ s32 (*init_hw)(struct e1000_hw *);
+ s32 (*setup_link)(struct e1000_hw *);
+ void (*write_vfta)(struct e1000_hw *, u32, u32);
+ void (*mta_set)(struct e1000_hw *, u32);
+ void (*rar_set)(struct e1000_hw *, u8*, u32);
+ s32 (*read_mac_addr)(struct e1000_hw *);
+ s32 (*set_vfta)(struct e1000_hw *, u16, bool);
+};
+
+struct e1000_mac_info {
+ struct e1000_mac_operations ops;
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum e1000_mac_type type;
+
+ u16 mta_reg_count;
+ u16 rar_entry_count;
+
+ bool get_link_status;
+};
+
+struct e1000_mbx_operations {
+ s32 (*init_params)(struct e1000_hw *hw);
+ s32 (*read)(struct e1000_hw *, u32 *, u16);
+ s32 (*write)(struct e1000_hw *, u32 *, u16);
+ s32 (*read_posted)(struct e1000_hw *, u32 *, u16);
+ s32 (*write_posted)(struct e1000_hw *, u32 *, u16);
+ s32 (*check_for_msg)(struct e1000_hw *);
+ s32 (*check_for_ack)(struct e1000_hw *);
+ s32 (*check_for_rst)(struct e1000_hw *);
+};
+
+struct e1000_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct e1000_mbx_info {
+ struct e1000_mbx_operations ops;
+ struct e1000_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u16 size;
+};
+
+struct e1000_dev_spec_vf {
+ u32 vf_number;
+ u32 v2p_mailbox;
+};
+
+struct e1000_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+ u8 __iomem *flash_address;
+ unsigned long io_base;
+
+ struct e1000_mac_info mac;
+ struct e1000_mbx_info mbx;
+
+ union {
+ struct e1000_dev_spec_vf vf;
+ } dev_spec;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+};
+
+/* These functions must be implemented by drivers */
+void e1000_rlpml_set_vf(struct e1000_hw *, u16);
+void e1000_init_function_pointers_vf(struct e1000_hw *hw);
+
+
+#endif /* _E1000_VF_H_ */
--- /dev/null
+################################################################################
+#
+# Intel PRO/10GbE Linux driver
+# Copyright(c) 1999 - 2008 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) PRO/10GbE ethernet driver
+#
+
+obj-$(CONFIG_IXGB) += ixgb.o
+
+ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_H_
+#define _IXGB_H_
+
+#include <linux/stddef.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/pagemap.h>
+#include <linux/dma-mapping.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <linux/capability.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <net/pkt_sched.h>
+#include <linux/list.h>
+#include <linux/reboot.h>
+#include <net/checksum.h>
+
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+
+#define BAR_0 0
+#define BAR_1 1
+#define BAR_5 5
+
+struct ixgb_adapter;
+#include "ixgb_hw.h"
+#include "ixgb_ee.h"
+#include "ixgb_ids.h"
+
+#define PFX "ixgb: "
+
+#ifdef _DEBUG_DRIVER_
+#define IXGB_DBG(fmt, args...) printk(KERN_DEBUG PFX fmt, ##args)
+#else
+#define IXGB_DBG(fmt, args...) \
+do { \
+ if (0) \
+ printk(KERN_DEBUG PFX fmt, ##args); \
+} while (0)
+#endif
+
+/* TX/RX descriptor defines */
+#define DEFAULT_TXD 256
+#define MAX_TXD 4096
+#define MIN_TXD 64
+
+/* hardware cannot reliably support more than 512 descriptors owned by
+ * hardware descriptor cache otherwise an unreliable ring under heavy
+ * receive load may result */
+#define DEFAULT_RXD 512
+#define MAX_RXD 512
+#define MIN_RXD 64
+
+/* Supported Rx Buffer Sizes */
+#define IXGB_RXBUFFER_2048 2048
+#define IXGB_RXBUFFER_4096 4096
+#define IXGB_RXBUFFER_8192 8192
+#define IXGB_RXBUFFER_16384 16384
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgb_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct ixgb_desc_ring {
+ /* pointer to the descriptor ring memory */
+ void *desc;
+ /* physical address of the descriptor ring */
+ dma_addr_t dma;
+ /* length of descriptor ring in bytes */
+ unsigned int size;
+ /* number of descriptors in the ring */
+ unsigned int count;
+ /* next descriptor to associate a buffer with */
+ unsigned int next_to_use;
+ /* next descriptor to check for DD status bit */
+ unsigned int next_to_clean;
+ /* array of buffer information structs */
+ struct ixgb_buffer *buffer_info;
+};
+
+#define IXGB_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
+#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc)
+#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc)
+#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc)
+
+/* board specific private data structure */
+
+struct ixgb_adapter {
+ struct timer_list watchdog_timer;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u32 bd_number;
+ u32 rx_buffer_len;
+ u32 part_num;
+ u16 link_speed;
+ u16 link_duplex;
+ struct work_struct tx_timeout_task;
+
+ /* TX */
+ struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
+ unsigned int restart_queue;
+ unsigned long timeo_start;
+ u32 tx_cmd_type;
+ u64 hw_csum_tx_good;
+ u64 hw_csum_tx_error;
+ u32 tx_int_delay;
+ u32 tx_timeout_count;
+ bool tx_int_delay_enable;
+ bool detect_tx_hung;
+
+ /* RX */
+ struct ixgb_desc_ring rx_ring;
+ u64 hw_csum_rx_error;
+ u64 hw_csum_rx_good;
+ u32 rx_int_delay;
+ bool rx_csum;
+
+ /* OS defined structs */
+ struct napi_struct napi;
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in ixgb_hw.h */
+ struct ixgb_hw hw;
+ u16 msg_enable;
+ struct ixgb_hw_stats stats;
+ u32 alloc_rx_buff_failed;
+ bool have_msi;
+ unsigned long flags;
+};
+
+enum ixgb_state_t {
+ /* TBD
+ __IXGB_TESTING,
+ __IXGB_RESETTING,
+ */
+ __IXGB_DOWN
+};
+
+/* Exported from other modules */
+extern void ixgb_check_options(struct ixgb_adapter *adapter);
+extern void ixgb_set_ethtool_ops(struct net_device *netdev);
+extern char ixgb_driver_name[];
+extern const char ixgb_driver_version[];
+
+extern int ixgb_up(struct ixgb_adapter *adapter);
+extern void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
+extern void ixgb_reset(struct ixgb_adapter *adapter);
+extern int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
+extern int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
+extern void ixgb_update_stats(struct ixgb_adapter *adapter);
+
+
+#endif /* _IXGB_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ixgb_hw.h"
+#include "ixgb_ee.h"
+/* Local prototypes */
+static u16 ixgb_shift_in_bits(struct ixgb_hw *hw);
+
+static void ixgb_shift_out_bits(struct ixgb_hw *hw,
+ u16 data,
+ u16 count);
+static void ixgb_standby_eeprom(struct ixgb_hw *hw);
+
+static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw);
+
+static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
+
+/******************************************************************************
+ * Raises the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_raise_clock(struct ixgb_hw *hw,
+ u32 *eecd_reg)
+{
+ /* Raise the clock input to the EEPROM (by setting the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg | IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Lowers the EEPROM's clock input.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * eecd_reg - EECD's current value
+ *****************************************************************************/
+static void
+ixgb_lower_clock(struct ixgb_hw *hw,
+ u32 *eecd_reg)
+{
+ /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
+ * wait 50 microseconds.
+ */
+ *eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, *eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Shift data bits out to the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * data - data to send to the EEPROM
+ * count - number of bits to shift out
+ *****************************************************************************/
+static void
+ixgb_shift_out_bits(struct ixgb_hw *hw,
+ u16 data,
+ u16 count)
+{
+ u32 eecd_reg;
+ u32 mask;
+
+ /* We need to shift "count" bits out to the EEPROM. So, value in the
+ * "data" parameter will be shifted out to the EEPROM one bit at a time.
+ * In order to do this, "data" must be broken down into bits.
+ */
+ mask = 0x01 << (count - 1);
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ do {
+ /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
+ * and then raising and then lowering the clock (the SK bit controls
+ * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
+ * by setting "DI" to "0" and then raising and then lowering the clock.
+ */
+ eecd_reg &= ~IXGB_EECD_DI;
+
+ if (data & mask)
+ eecd_reg |= IXGB_EECD_DI;
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+
+ udelay(50);
+
+ ixgb_raise_clock(hw, &eecd_reg);
+ ixgb_lower_clock(hw, &eecd_reg);
+
+ mask = mask >> 1;
+
+ } while (mask);
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eecd_reg &= ~IXGB_EECD_DI;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+}
+
+/******************************************************************************
+ * Shift data bits in from the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static u16
+ixgb_shift_in_bits(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+ u32 i;
+ u16 data;
+
+ /* In order to read a register from the EEPROM, we need to shift 16 bits
+ * in from the EEPROM. Bits are "shifted in" by raising the clock input to
+ * the EEPROM (setting the SK bit), and then reading the value of the "DO"
+ * bit. During this "shifting in" process the "DI" bit should always be
+ * clear..
+ */
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
+ data = 0;
+
+ for (i = 0; i < 16; i++) {
+ data = data << 1;
+ ixgb_raise_clock(hw, &eecd_reg);
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_DI);
+ if (eecd_reg & IXGB_EECD_DO)
+ data |= 1;
+
+ ixgb_lower_clock(hw, &eecd_reg);
+ }
+
+ return data;
+}
+
+/******************************************************************************
+ * Prepares EEPROM for access
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
+ * function should be called before issuing a command to the EEPROM.
+ *****************************************************************************/
+static void
+ixgb_setup_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Clear SK and DI */
+ eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ /* Set CS */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+}
+
+/******************************************************************************
+ * Returns EEPROM to a "standby" state
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_standby_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Deselect EEPROM */
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock high */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Select EEPROM */
+ eecd_reg |= IXGB_EECD_CS;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Clock low */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Raises then lowers the EEPROM's clock pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clock_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ /* Rising edge of clock */
+ eecd_reg |= IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+
+ /* Falling edge of clock */
+ eecd_reg &= ~IXGB_EECD_SK;
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+ IXGB_WRITE_FLUSH(hw);
+ udelay(50);
+}
+
+/******************************************************************************
+ * Terminates a command by lowering the EEPROM's chip select pin
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_cleanup_eeprom(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
+
+ IXGB_WRITE_REG(hw, EECD, eecd_reg);
+
+ ixgb_clock_eeprom(hw);
+}
+
+/******************************************************************************
+ * Waits for the EEPROM to finish the current command.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * The command is done when the EEPROM's data out pin goes high.
+ *
+ * Returns:
+ * true: EEPROM data pin is high before timeout.
+ * false: Time expired.
+ *****************************************************************************/
+static bool
+ixgb_wait_eeprom_command(struct ixgb_hw *hw)
+{
+ u32 eecd_reg;
+ u32 i;
+
+ /* Toggle the CS line. This in effect tells to EEPROM to actually execute
+ * the command in question.
+ */
+ ixgb_standby_eeprom(hw);
+
+ /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will
+ * signal that the command has been completed by raising the DO signal.
+ * If DO does not go high in 10 milliseconds, then error out.
+ */
+ for (i = 0; i < 200; i++) {
+ eecd_reg = IXGB_READ_REG(hw, EECD);
+
+ if (eecd_reg & IXGB_EECD_DO)
+ return true;
+
+ udelay(50);
+ }
+ ASSERT(0);
+ return false;
+}
+
+/******************************************************************************
+ * Verifies that the EEPROM has a valid checksum
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Reads the first 64 16 bit words of the EEPROM and sums the values read.
+ * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
+ * valid.
+ *
+ * Returns:
+ * true: Checksum is valid
+ * false: Checksum is not valid.
+ *****************************************************************************/
+bool
+ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i;
+
+ for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ if (checksum == (u16) EEPROM_SUM)
+ return true;
+ else
+ return false;
+}
+
+/******************************************************************************
+ * Calculates the EEPROM checksum and writes it to the EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
+ * Writes the difference to word offset 63 of the EEPROM.
+ *****************************************************************************/
+void
+ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
+{
+ u16 checksum = 0;
+ u16 i;
+
+ for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
+ checksum += ixgb_read_eeprom(hw, i);
+
+ checksum = (u16) EEPROM_SUM - checksum;
+
+ ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
+}
+
+/******************************************************************************
+ * Writes a 16 bit word to a given offset in the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * reg - offset within the EEPROM to be written to
+ * data - 16 bit word to be written to the EEPROM
+ *
+ * If ixgb_update_eeprom_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ *
+ *****************************************************************************/
+void
+ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ /* Prepare the EEPROM for writing */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
+ * plus 4-bit dummy). This puts the EEPROM into write/erase mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Prepare the EEPROM */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the Write command (3-bit opcode + 6-bit addr) */
+ ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Send the data */
+ ixgb_shift_out_bits(hw, data, 16);
+
+ ixgb_wait_eeprom_command(hw);
+
+ /* Recover from write */
+ ixgb_standby_eeprom(hw);
+
+ /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
+ * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
+ * mode.
+ */
+ ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
+ ixgb_shift_out_bits(hw, 0, 4);
+
+ /* Done with writing */
+ ixgb_cleanup_eeprom(hw);
+
+ /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
+ ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
+}
+
+/******************************************************************************
+ * Reads a 16 bit word from the EEPROM.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - offset of 16 bit word in the EEPROM to read
+ *
+ * Returns:
+ * The 16-bit value read from the eeprom
+ *****************************************************************************/
+u16
+ixgb_read_eeprom(struct ixgb_hw *hw,
+ u16 offset)
+{
+ u16 data;
+
+ /* Prepare the EEPROM for reading */
+ ixgb_setup_eeprom(hw);
+
+ /* Send the READ command (opcode + addr) */
+ ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
+ /*
+ * We have a 64 word EEPROM, there are 6 address bits
+ */
+ ixgb_shift_out_bits(hw, offset, 6);
+
+ /* Read the data */
+ data = ixgb_shift_in_bits(hw);
+
+ /* End this read operation */
+ ixgb_standby_eeprom(hw);
+
+ return data;
+}
+
+/******************************************************************************
+ * Reads eeprom and stores data in shared structure.
+ * Validates eeprom checksum and eeprom signature.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * true: if eeprom read is successful
+ * false: otherwise.
+ *****************************************************************************/
+bool
+ixgb_get_eeprom_data(struct ixgb_hw *hw)
+{
+ u16 i;
+ u16 checksum = 0;
+ struct ixgb_ee_map_type *ee_map;
+
+ ENTER();
+
+ ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ pr_debug("Reading eeprom data\n");
+ for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
+ u16 ee_data;
+ ee_data = ixgb_read_eeprom(hw, i);
+ checksum += ee_data;
+ hw->eeprom[i] = cpu_to_le16(ee_data);
+ }
+
+ if (checksum != (u16) EEPROM_SUM) {
+ pr_debug("Checksum invalid\n");
+ /* clear the init_ctrl_reg_1 to signify that the cache is
+ * invalidated */
+ ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
+ return false;
+ }
+
+ if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
+ != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
+ pr_debug("Signature invalid\n");
+ return false;
+ }
+
+ return true;
+}
+
+/******************************************************************************
+ * Local function to check if the eeprom signature is good
+ * If the eeprom signature is good, calls ixgb)get_eeprom_data.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * true: eeprom signature was good and the eeprom read was successful
+ * false: otherwise.
+ ******************************************************************************/
+static bool
+ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
+ == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
+ return true;
+ } else {
+ return ixgb_get_eeprom_data(hw);
+ }
+}
+
+/******************************************************************************
+ * return a word from the eeprom
+ *
+ * hw - Struct containing variables accessed by shared code
+ * index - Offset of eeprom word
+ *
+ * Returns:
+ * Word at indexed offset in eeprom, if valid, 0 otherwise.
+ ******************************************************************************/
+__le16
+ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index)
+{
+
+ if ((index < IXGB_EEPROM_SIZE) &&
+ (ixgb_check_and_get_eeprom_data(hw) == true)) {
+ return hw->eeprom[index];
+ }
+
+ return 0;
+}
+
+/******************************************************************************
+ * return the mac address from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
+ *
+ * Returns: None.
+ ******************************************************************************/
+void
+ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
+ u8 *mac_addr)
+{
+ int i;
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ ENTER();
+
+ if (ixgb_check_and_get_eeprom_data(hw) == true) {
+ for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
+ mac_addr[i] = ee_map->mac_addr[i];
+ }
+ pr_debug("eeprom mac address = %pM\n", mac_addr);
+ }
+}
+
+
+/******************************************************************************
+ * return the Printed Board Assembly number from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * PBA number if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+u32
+ixgb_get_ee_pba_number(struct ixgb_hw *hw)
+{
+ if (ixgb_check_and_get_eeprom_data(hw) == true)
+ return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
+ | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16);
+
+ return 0;
+}
+
+
+/******************************************************************************
+ * return the Device Id from EEPROM
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Returns:
+ * Device Id if EEPROM contents are valid, 0 otherwise
+ ******************************************************************************/
+u16
+ixgb_get_ee_device_id(struct ixgb_hw *hw)
+{
+ struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
+
+ if (ixgb_check_and_get_eeprom_data(hw) == true)
+ return le16_to_cpu(ee_map->device_id);
+
+ return 0;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_EE_H_
+#define _IXGB_EE_H_
+
+#define IXGB_EEPROM_SIZE 64 /* Size in words */
+
+#define IXGB_ETH_LENGTH_OF_ADDRESS 6
+
+/* EEPROM Commands */
+#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */
+#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */
+#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */
+#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */
+#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */
+
+/* EEPROM MAP (Word Offsets) */
+#define EEPROM_IA_1_2_REG 0x0000
+#define EEPROM_IA_3_4_REG 0x0001
+#define EEPROM_IA_5_6_REG 0x0002
+#define EEPROM_COMPATIBILITY_REG 0x0003
+#define EEPROM_PBA_1_2_REG 0x0008
+#define EEPROM_PBA_3_4_REG 0x0009
+#define EEPROM_INIT_CONTROL1_REG 0x000A
+#define EEPROM_SUBSYS_ID_REG 0x000B
+#define EEPROM_SUBVEND_ID_REG 0x000C
+#define EEPROM_DEVICE_ID_REG 0x000D
+#define EEPROM_VENDOR_ID_REG 0x000E
+#define EEPROM_INIT_CONTROL2_REG 0x000F
+#define EEPROM_SWDPINS_REG 0x0020
+#define EEPROM_CIRCUIT_CTRL_REG 0x0021
+#define EEPROM_D0_D3_POWER_REG 0x0022
+#define EEPROM_FLASH_VERSION 0x0032
+#define EEPROM_CHECKSUM_REG 0x003F
+
+/* Mask bits for fields in Word 0x0a of the EEPROM */
+
+#define EEPROM_ICW1_SIGNATURE_MASK 0xC000
+#define EEPROM_ICW1_SIGNATURE_VALID 0x4000
+#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000
+
+/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
+#define EEPROM_SUM 0xBABA
+
+/* EEPROM Map Sizes (Byte Counts) */
+#define PBA_SIZE 4
+
+/* EEPROM Map defines (WORD OFFSETS)*/
+
+/* EEPROM structure */
+struct ixgb_ee_map_type {
+ u8 mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS];
+ __le16 compatibility;
+ __le16 reserved1[4];
+ __le32 pba_number;
+ __le16 init_ctrl_reg_1;
+ __le16 subsystem_id;
+ __le16 subvendor_id;
+ __le16 device_id;
+ __le16 vendor_id;
+ __le16 init_ctrl_reg_2;
+ __le16 oem_reserved[16];
+ __le16 swdpins_reg;
+ __le16 circuit_ctrl_reg;
+ u8 d3_power;
+ u8 d0_power;
+ __le16 reserved2[28];
+ __le16 checksum;
+};
+
+/* EEPROM Functions */
+u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg);
+
+bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
+
+void ixgb_update_eeprom_checksum(struct ixgb_hw *hw);
+
+void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data);
+
+#endif /* IXGB_EE_H */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgb */
+
+#include "ixgb.h"
+
+#include <asm/uaccess.h>
+
+#define IXGB_ALL_RAR_ENTRIES 16
+
+enum {NETDEV_STATS, IXGB_STATS};
+
+struct ixgb_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IXGB_STAT(m) IXGB_STATS, \
+ FIELD_SIZEOF(struct ixgb_adapter, m), \
+ offsetof(struct ixgb_adapter, m)
+#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \
+ FIELD_SIZEOF(struct net_device, m), \
+ offsetof(struct net_device, m)
+
+static struct ixgb_stats ixgb_gstrings_stats[] = {
+ {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
+ {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
+ {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
+ {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
+ {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
+ {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
+ {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
+ {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
+ {"multicast", IXGB_NETDEV_STAT(stats.multicast)},
+ {"collisions", IXGB_NETDEV_STAT(stats.collisions)},
+
+/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */
+ {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
+ {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
+ {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
+ {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
+ {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
+ {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
+ {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
+ {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
+ {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
+ {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
+ {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
+ {"tx_deferred_ok", IXGB_STAT(stats.dc)},
+ {"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
+ {"tx_restart_queue", IXGB_STAT(restart_queue) },
+ {"rx_long_length_errors", IXGB_STAT(stats.roc)},
+ {"rx_short_length_errors", IXGB_STAT(stats.ruc)},
+ {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)},
+ {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)},
+ {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)},
+ {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)},
+ {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)},
+ {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)},
+ {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)},
+ {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)},
+ {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)},
+ {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)}
+};
+
+#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats)
+
+static int
+ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+
+ if (netif_carrier_ok(adapter->netdev)) {
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ ecmd->autoneg = AUTONEG_DISABLE;
+ return 0;
+}
+
+static void ixgb_set_speed_duplex(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ /* be optimistic about our link, since we were up before */
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ netif_wake_queue(netdev);
+}
+
+static int
+ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 speed = ethtool_cmd_speed(ecmd);
+
+ if (ecmd->autoneg == AUTONEG_ENABLE ||
+ (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+ return -EINVAL;
+
+ if (netif_running(adapter->netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_reset(adapter);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+
+ return 0;
+}
+
+static void
+ixgb_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+
+ pause->autoneg = AUTONEG_DISABLE;
+
+ if (hw->fc.type == ixgb_fc_rx_pause)
+ pause->rx_pause = 1;
+ else if (hw->fc.type == ixgb_fc_tx_pause)
+ pause->tx_pause = 1;
+ else if (hw->fc.type == ixgb_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+ }
+}
+
+static int
+ixgb_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+
+ if (pause->autoneg == AUTONEG_ENABLE)
+ return -EINVAL;
+
+ if (pause->rx_pause && pause->tx_pause)
+ hw->fc.type = ixgb_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = ixgb_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ hw->fc.type = ixgb_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ hw->fc.type = ixgb_fc_none;
+
+ if (netif_running(adapter->netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+
+ return 0;
+}
+
+static u32
+ixgb_get_rx_csum(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ return adapter->rx_csum;
+}
+
+static int
+ixgb_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ adapter->rx_csum = data;
+
+ if (netif_running(netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+ return 0;
+}
+
+static u32
+ixgb_get_tx_csum(struct net_device *netdev)
+{
+ return (netdev->features & NETIF_F_HW_CSUM) != 0;
+}
+
+static int
+ixgb_set_tx_csum(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_HW_CSUM;
+ else
+ netdev->features &= ~NETIF_F_HW_CSUM;
+
+ return 0;
+}
+
+static int
+ixgb_set_tso(struct net_device *netdev, u32 data)
+{
+ if (data)
+ netdev->features |= NETIF_F_TSO;
+ else
+ netdev->features &= ~NETIF_F_TSO;
+ return 0;
+}
+
+static u32
+ixgb_get_msglevel(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void
+ixgb_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_
+
+static int
+ixgb_get_regs_len(struct net_device *netdev)
+{
+#define IXGB_REG_DUMP_LEN 136*sizeof(u32)
+ return IXGB_REG_DUMP_LEN;
+}
+
+static void
+ixgb_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 *reg = p;
+ u32 *reg_start = reg;
+ u8 i;
+
+ /* the 1 (one) below indicates an attempt at versioning, if the
+ * interface in ethtool or the driver changes, this 1 should be
+ * incremented */
+ regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
+
+ /* General Registers */
+ *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */
+ *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */
+ *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */
+ *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */
+ *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */
+
+ /* Interrupt */
+ *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */
+ *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */
+ *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */
+ *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */
+
+ /* Receive */
+ *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */
+ *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */
+ *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */
+ *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */
+ *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */
+ *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */
+ *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */
+ *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */
+ *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */
+ *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */
+ *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
+ *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
+
+ /* there are 16 RAR entries in hardware, we only use 3 */
+ for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
+ *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
+ *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
+ }
+
+ /* Transmit */
+ *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */
+ *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */
+ *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */
+ *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */
+ *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */
+ *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */
+ *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */
+ *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */
+ *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */
+ *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */
+
+ /* Physical */
+ *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */
+ *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */
+ *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */
+ *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */
+ *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */
+ *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */
+ *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */
+ *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */
+ *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */
+ *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */
+ *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */
+ *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */
+ *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */
+
+ /* Statistics */
+ *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */
+ *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */
+ *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */
+ *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */
+ *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */
+ *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */
+ *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */
+ *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */
+ *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */
+ *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */
+ *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */
+ *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */
+ *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */
+ *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */
+ *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */
+ *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */
+ *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */
+ *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */
+ *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */
+ *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */
+ *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */
+ *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */
+ *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */
+ *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */
+ *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */
+ *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */
+ *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */
+ *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */
+ *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */
+ *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */
+ *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */
+ *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */
+ *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */
+ *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */
+ *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */
+ *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */
+ *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */
+ *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */
+ *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */
+ *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */
+ *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */
+ *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */
+ *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */
+ *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */
+ *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */
+ *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */
+ *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */
+ *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */
+ *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */
+ *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */
+ *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */
+ *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */
+ *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */
+ *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */
+ *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */
+ *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */
+ *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */
+ *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */
+ *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */
+ *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */
+
+ regs->len = (reg - reg_start) * sizeof(u32);
+}
+
+static int
+ixgb_get_eeprom_len(struct net_device *netdev)
+{
+ /* return size in bytes */
+ return IXGB_EEPROM_SIZE << 1;
+}
+
+static int
+ixgb_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ __le16 *eeprom_buff;
+ int i, max_len, first_word, last_word;
+ int ret_val = 0;
+
+ if (eeprom->len == 0) {
+ ret_val = -EINVAL;
+ goto geeprom_error;
+ }
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ max_len = ixgb_get_eeprom_len(netdev);
+
+ if (eeprom->offset > eeprom->offset + eeprom->len) {
+ ret_val = -EINVAL;
+ goto geeprom_error;
+ }
+
+ if ((eeprom->offset + eeprom->len) > max_len)
+ eeprom->len = (max_len - eeprom->offset);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+
+ eeprom_buff = kmalloc(sizeof(__le16) *
+ (last_word - first_word + 1), GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ /* note the eeprom was good because the driver loaded */
+ for (i = 0; i <= (last_word - first_word); i++)
+ eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+
+geeprom_error:
+ return ret_val;
+}
+
+static int
+ixgb_set_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ void *ptr;
+ int max_len, first_word, last_word;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
+ return -EFAULT;
+
+ max_len = ixgb_get_eeprom_len(netdev);
+
+ if (eeprom->offset > eeprom->offset + eeprom->len)
+ return -EINVAL;
+
+ if ((eeprom->offset + eeprom->len) > max_len)
+ eeprom->len = (max_len - eeprom->offset);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_buff = kmalloc(max_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ptr = (void *)eeprom_buff;
+
+ if (eeprom->offset & 1) {
+ /* need read/modify/write of first changed EEPROM word */
+ /* only the second byte of the word is being modified */
+ eeprom_buff[0] = ixgb_read_eeprom(hw, first_word);
+ ptr++;
+ }
+ if ((eeprom->offset + eeprom->len) & 1) {
+ /* need read/modify/write of last changed EEPROM word */
+ /* only the first byte of the word is being modified */
+ eeprom_buff[last_word - first_word]
+ = ixgb_read_eeprom(hw, last_word);
+ }
+
+ memcpy(ptr, bytes, eeprom->len);
+ for (i = 0; i <= (last_word - first_word); i++)
+ ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]);
+
+ /* Update the checksum over the first part of the EEPROM if needed */
+ if (first_word <= EEPROM_CHECKSUM_REG)
+ ixgb_update_eeprom_checksum(hw);
+
+ kfree(eeprom_buff);
+ return 0;
+}
+
+static void
+ixgb_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ strncpy(drvinfo->driver, ixgb_driver_name, 32);
+ strncpy(drvinfo->version, ixgb_driver_version, 32);
+ strncpy(drvinfo->fw_version, "N/A", 32);
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+ drvinfo->n_stats = IXGB_STATS_LEN;
+ drvinfo->regdump_len = ixgb_get_regs_len(netdev);
+ drvinfo->eedump_len = ixgb_get_eeprom_len(netdev);
+}
+
+static void
+ixgb_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+
+ ring->rx_max_pending = MAX_RXD;
+ ring->tx_max_pending = MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rxdr->count;
+ ring->tx_pending = txdr->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int
+ixgb_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+ struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
+ int err;
+
+ tx_old = adapter->tx_ring;
+ rx_old = adapter->rx_ring;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ if (netif_running(adapter->netdev))
+ ixgb_down(adapter, true);
+
+ rxdr->count = max(ring->rx_pending,(u32)MIN_RXD);
+ rxdr->count = min(rxdr->count,(u32)MAX_RXD);
+ rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ txdr->count = max(ring->tx_pending,(u32)MIN_TXD);
+ txdr->count = min(txdr->count,(u32)MAX_TXD);
+ txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if (netif_running(adapter->netdev)) {
+ /* Try to get new resources before deleting old */
+ if ((err = ixgb_setup_rx_resources(adapter)))
+ goto err_setup_rx;
+ if ((err = ixgb_setup_tx_resources(adapter)))
+ goto err_setup_tx;
+
+ /* save the new, restore the old in order to free it,
+ * then restore the new back again */
+
+ rx_new = adapter->rx_ring;
+ tx_new = adapter->tx_ring;
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ ixgb_free_rx_resources(adapter);
+ ixgb_free_tx_resources(adapter);
+ adapter->rx_ring = rx_new;
+ adapter->tx_ring = tx_new;
+ if ((err = ixgb_up(adapter)))
+ return err;
+ ixgb_set_speed_duplex(netdev);
+ }
+
+ return 0;
+err_setup_tx:
+ ixgb_free_rx_resources(adapter);
+err_setup_rx:
+ adapter->rx_ring = rx_old;
+ adapter->tx_ring = tx_old;
+ ixgb_up(adapter);
+ return err;
+}
+
+static int
+ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ return 2;
+
+ case ETHTOOL_ID_ON:
+ ixgb_led_on(&adapter->hw);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ case ETHTOOL_ID_INACTIVE:
+ ixgb_led_off(&adapter->hw);
+ }
+
+ return 0;
+}
+
+static int
+ixgb_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return IXGB_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void
+ixgb_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int i;
+ char *p = NULL;
+
+ ixgb_update_stats(adapter);
+ for (i = 0; i < IXGB_STATS_LEN; i++) {
+ switch (ixgb_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) netdev +
+ ixgb_gstrings_stats[i].stat_offset;
+ break;
+ case IXGB_STATS:
+ p = (char *) adapter +
+ ixgb_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+}
+
+static void
+ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
+{
+ int i;
+
+ switch(stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < IXGB_STATS_LEN; i++) {
+ memcpy(data + i * ETH_GSTRING_LEN,
+ ixgb_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ }
+ break;
+ }
+}
+
+static int ixgb_set_flags(struct net_device *netdev, u32 data)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ bool need_reset;
+ int rc;
+
+ /*
+ * Tx VLAN insertion does not work per HW design when Rx stripping is
+ * disabled. Disable txvlan when rxvlan is turned off, and enable
+ * rxvlan when txvlan is turned on.
+ */
+ if (!(data & ETH_FLAG_RXVLAN) &&
+ (netdev->features & NETIF_F_HW_VLAN_TX))
+ data &= ~ETH_FLAG_TXVLAN;
+ else if (data & ETH_FLAG_TXVLAN)
+ data |= ETH_FLAG_RXVLAN;
+
+ need_reset = (data & ETH_FLAG_RXVLAN) !=
+ (netdev->features & NETIF_F_HW_VLAN_RX);
+
+ rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
+ ETH_FLAG_TXVLAN);
+ if (rc)
+ return rc;
+
+ if (need_reset) {
+ if (netif_running(netdev)) {
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+ ixgb_set_speed_duplex(netdev);
+ } else
+ ixgb_reset(adapter);
+ }
+
+ return 0;
+}
+
+static const struct ethtool_ops ixgb_ethtool_ops = {
+ .get_settings = ixgb_get_settings,
+ .set_settings = ixgb_set_settings,
+ .get_drvinfo = ixgb_get_drvinfo,
+ .get_regs_len = ixgb_get_regs_len,
+ .get_regs = ixgb_get_regs,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = ixgb_get_eeprom_len,
+ .get_eeprom = ixgb_get_eeprom,
+ .set_eeprom = ixgb_set_eeprom,
+ .get_ringparam = ixgb_get_ringparam,
+ .set_ringparam = ixgb_set_ringparam,
+ .get_pauseparam = ixgb_get_pauseparam,
+ .set_pauseparam = ixgb_set_pauseparam,
+ .get_rx_csum = ixgb_get_rx_csum,
+ .set_rx_csum = ixgb_set_rx_csum,
+ .get_tx_csum = ixgb_get_tx_csum,
+ .set_tx_csum = ixgb_set_tx_csum,
+ .set_sg = ethtool_op_set_sg,
+ .get_msglevel = ixgb_get_msglevel,
+ .set_msglevel = ixgb_set_msglevel,
+ .set_tso = ixgb_set_tso,
+ .get_strings = ixgb_get_strings,
+ .set_phys_id = ixgb_set_phys_id,
+ .get_sset_count = ixgb_get_sset_count,
+ .get_ethtool_stats = ixgb_get_ethtool_stats,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = ixgb_set_flags,
+};
+
+void ixgb_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &ixgb_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ixgb_hw.c
+ * Shared functions for accessing and configuring the adapter
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ixgb_hw.h"
+#include "ixgb_ids.h"
+
+#include <linux/etherdevice.h>
+
+/* Local function prototypes */
+
+static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
+
+static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value);
+
+static void ixgb_get_bus_info(struct ixgb_hw *hw);
+
+static bool ixgb_link_reset(struct ixgb_hw *hw);
+
+static void ixgb_optics_reset(struct ixgb_hw *hw);
+
+static void ixgb_optics_reset_bcm(struct ixgb_hw *hw);
+
+static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);
+
+static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
+
+static void ixgb_clear_vfta(struct ixgb_hw *hw);
+
+static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
+
+static u16 ixgb_read_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type);
+
+static bool ixgb_setup_fc(struct ixgb_hw *hw);
+
+static bool mac_addr_valid(u8 *mac_addr);
+
+static u32 ixgb_mac_reset(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+
+ ctrl_reg = IXGB_CTRL0_RST |
+ IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */
+ IXGB_CTRL0_SDP2_DIR |
+ IXGB_CTRL0_SDP1_DIR |
+ IXGB_CTRL0_SDP0_DIR |
+ IXGB_CTRL0_SDP3 | /* Initial value 1101 */
+ IXGB_CTRL0_SDP2 |
+ IXGB_CTRL0_SDP0;
+
+#ifdef HP_ZX1
+ /* Workaround for 82597EX reset errata */
+ IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg);
+#else
+ IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
+#endif
+
+ /* Delay a few ms just to allow the reset to complete */
+ msleep(IXGB_DELAY_AFTER_RESET);
+ ctrl_reg = IXGB_READ_REG(hw, CTRL0);
+#ifdef DBG
+ /* Make sure the self-clearing global reset bit did self clear */
+ ASSERT(!(ctrl_reg & IXGB_CTRL0_RST));
+#endif
+
+ if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID) {
+ ctrl_reg = /* Enable interrupt from XFP and SerDes */
+ IXGB_CTRL1_GPI0_EN |
+ IXGB_CTRL1_SDP6_DIR |
+ IXGB_CTRL1_SDP7_DIR |
+ IXGB_CTRL1_SDP6 |
+ IXGB_CTRL1_SDP7;
+ IXGB_WRITE_REG(hw, CTRL1, ctrl_reg);
+ ixgb_optics_reset_bcm(hw);
+ }
+
+ if (hw->phy_type == ixgb_phy_type_txn17401)
+ ixgb_optics_reset(hw);
+
+ return ctrl_reg;
+}
+
+/******************************************************************************
+ * Reset the transmit and receive units; mask and clear all interrupts.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+bool
+ixgb_adapter_stop(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+ u32 icr_reg;
+
+ ENTER();
+
+ /* If we are stopped or resetting exit gracefully and wait to be
+ * started again before accessing the hardware.
+ */
+ if (hw->adapter_stopped) {
+ pr_debug("Exiting because the adapter is already stopped!!!\n");
+ return false;
+ }
+
+ /* Set the Adapter Stopped flag so other driver functions stop
+ * touching the Hardware.
+ */
+ hw->adapter_stopped = true;
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ pr_debug("Masking off all interrupts\n");
+ IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF);
+
+ /* Disable the Transmit and Receive units. Then delay to allow
+ * any pending transactions to complete before we hit the MAC with
+ * the global reset.
+ */
+ IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
+ IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
+ IXGB_WRITE_FLUSH(hw);
+ msleep(IXGB_DELAY_BEFORE_RESET);
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ pr_debug("Issuing a global reset to MAC\n");
+
+ ctrl_reg = ixgb_mac_reset(hw);
+
+ /* Clear interrupt mask to stop board from generating interrupts */
+ pr_debug("Masking off all interrupts\n");
+ IXGB_WRITE_REG(hw, IMC, 0xffffffff);
+
+ /* Clear any pending interrupt events. */
+ icr_reg = IXGB_READ_REG(hw, ICR);
+
+ return ctrl_reg & IXGB_CTRL0_RST;
+}
+
+
+/******************************************************************************
+ * Identifies the vendor of the optics module on the adapter. The SR adapters
+ * support two different types of XPAK optics, so it is necessary to determine
+ * which optics are present before applying any optics-specific workarounds.
+ *
+ * hw - Struct containing variables accessed by shared code.
+ *
+ * Returns: the vendor of the XPAK optics module.
+ *****************************************************************************/
+static ixgb_xpak_vendor
+ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
+{
+ u32 i;
+ u16 vendor_name[5];
+ ixgb_xpak_vendor xpak_vendor;
+
+ ENTER();
+
+ /* Read the first few bytes of the vendor string from the XPAK NVR
+ * registers. These are standard XENPAK/XPAK registers, so all XPAK
+ * devices should implement them. */
+ for (i = 0; i < 5; i++) {
+ vendor_name[i] = ixgb_read_phy_reg(hw,
+ MDIO_PMA_PMD_XPAK_VENDOR_NAME
+ + i, IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD);
+ }
+
+ /* Determine the actual vendor */
+ if (vendor_name[0] == 'I' &&
+ vendor_name[1] == 'N' &&
+ vendor_name[2] == 'T' &&
+ vendor_name[3] == 'E' && vendor_name[4] == 'L') {
+ xpak_vendor = ixgb_xpak_vendor_intel;
+ } else {
+ xpak_vendor = ixgb_xpak_vendor_infineon;
+ }
+
+ return xpak_vendor;
+}
+
+/******************************************************************************
+ * Determine the physical layer module on the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code. The device_id
+ * field must be (correctly) populated before calling this routine.
+ *
+ * Returns: the phy type of the adapter.
+ *****************************************************************************/
+static ixgb_phy_type
+ixgb_identify_phy(struct ixgb_hw *hw)
+{
+ ixgb_phy_type phy_type;
+ ixgb_xpak_vendor xpak_vendor;
+
+ ENTER();
+
+ /* Infer the transceiver/phy type from the device id */
+ switch (hw->device_id) {
+ case IXGB_DEVICE_ID_82597EX:
+ pr_debug("Identified TXN17401 optics\n");
+ phy_type = ixgb_phy_type_txn17401;
+ break;
+
+ case IXGB_DEVICE_ID_82597EX_SR:
+ /* The SR adapters carry two different types of XPAK optics
+ * modules; read the vendor identifier to determine the exact
+ * type of optics. */
+ xpak_vendor = ixgb_identify_xpak_vendor(hw);
+ if (xpak_vendor == ixgb_xpak_vendor_intel) {
+ pr_debug("Identified TXN17201 optics\n");
+ phy_type = ixgb_phy_type_txn17201;
+ } else {
+ pr_debug("Identified G6005 optics\n");
+ phy_type = ixgb_phy_type_g6005;
+ }
+ break;
+ case IXGB_DEVICE_ID_82597EX_LR:
+ pr_debug("Identified G6104 optics\n");
+ phy_type = ixgb_phy_type_g6104;
+ break;
+ case IXGB_DEVICE_ID_82597EX_CX4:
+ pr_debug("Identified CX4\n");
+ xpak_vendor = ixgb_identify_xpak_vendor(hw);
+ if (xpak_vendor == ixgb_xpak_vendor_intel) {
+ pr_debug("Identified TXN17201 optics\n");
+ phy_type = ixgb_phy_type_txn17201;
+ } else {
+ pr_debug("Identified G6005 optics\n");
+ phy_type = ixgb_phy_type_g6005;
+ }
+ break;
+ default:
+ pr_debug("Unknown physical layer module\n");
+ phy_type = ixgb_phy_type_unknown;
+ break;
+ }
+
+ /* update phy type for sun specific board */
+ if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID)
+ phy_type = ixgb_phy_type_bcm;
+
+ return phy_type;
+}
+
+/******************************************************************************
+ * Performs basic configuration of the adapter.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Resets the controller.
+ * Reads and validates the EEPROM.
+ * Initializes the receive address registers.
+ * Initializes the multicast table.
+ * Clears all on-chip counters.
+ * Calls routine to setup flow control settings.
+ * Leaves the transmit and receive units disabled and uninitialized.
+ *
+ * Returns:
+ * true if successful,
+ * false if unrecoverable problems were encountered.
+ *****************************************************************************/
+bool
+ixgb_init_hw(struct ixgb_hw *hw)
+{
+ u32 i;
+ u32 ctrl_reg;
+ bool status;
+
+ ENTER();
+
+ /* Issue a global reset to the MAC. This will reset the chip's
+ * transmit, receive, DMA, and link units. It will not effect
+ * the current PCI configuration. The global reset bit is self-
+ * clearing, and should clear within a microsecond.
+ */
+ pr_debug("Issuing a global reset to MAC\n");
+
+ ctrl_reg = ixgb_mac_reset(hw);
+
+ pr_debug("Issuing an EE reset to MAC\n");
+#ifdef HP_ZX1
+ /* Workaround for 82597EX reset errata */
+ IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST);
+#else
+ IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST);
+#endif
+
+ /* Delay a few ms just to allow the reset to complete */
+ msleep(IXGB_DELAY_AFTER_EE_RESET);
+
+ if (!ixgb_get_eeprom_data(hw))
+ return false;
+
+ /* Use the device id to determine the type of phy/transceiver. */
+ hw->device_id = ixgb_get_ee_device_id(hw);
+ hw->phy_type = ixgb_identify_phy(hw);
+
+ /* Setup the receive addresses.
+ * Receive Address Registers (RARs 0 - 15).
+ */
+ ixgb_init_rx_addrs(hw);
+
+ /*
+ * Check that a valid MAC address has been set.
+ * If it is not valid, we fail hardware init.
+ */
+ if (!mac_addr_valid(hw->curr_mac_addr)) {
+ pr_debug("MAC address invalid after ixgb_init_rx_addrs\n");
+ return(false);
+ }
+
+ /* tell the routines in this file they can access hardware again */
+ hw->adapter_stopped = false;
+
+ /* Fill in the bus_info structure */
+ ixgb_get_bus_info(hw);
+
+ /* Zero out the Multicast HASH table */
+ pr_debug("Zeroing the MTA\n");
+ for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
+ IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
+
+ /* Zero out the VLAN Filter Table Array */
+ ixgb_clear_vfta(hw);
+
+ /* Zero all of the hardware counters */
+ ixgb_clear_hw_cntrs(hw);
+
+ /* Call a subroutine to setup flow control. */
+ status = ixgb_setup_fc(hw);
+
+ /* 82597EX errata: Call check-for-link in case lane deskew is locked */
+ ixgb_check_for_link(hw);
+
+ return status;
+}
+
+/******************************************************************************
+ * Initializes receive address filters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ *****************************************************************************/
+static void
+ixgb_init_rx_addrs(struct ixgb_hw *hw)
+{
+ u32 i;
+
+ ENTER();
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (!mac_addr_valid(hw->curr_mac_addr)) {
+
+ /* Get the MAC address from the eeprom for later reference */
+ ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr);
+
+ pr_debug("Keeping Permanent MAC Addr = %pM\n",
+ hw->curr_mac_addr);
+ } else {
+
+ /* Setup the receive address. */
+ pr_debug("Overriding MAC Address in RAR[0]\n");
+ pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr);
+
+ ixgb_rar_set(hw, hw->curr_mac_addr, 0);
+ }
+
+ /* Zero out the other 15 receive addresses. */
+ pr_debug("Clearing RAR[1-15]\n");
+ for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
+ /* Write high reg first to disable the AV bit first */
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ }
+}
+
+/******************************************************************************
+ * Updates the MAC's list of multicast addresses.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr_list - the list of new multicast addresses
+ * mc_addr_count - number of addresses
+ * pad - number of bytes between addresses in the list
+ *
+ * The given list replaces any existing list. Clears the last 15 receive
+ * address registers and the multicast table. Uses receive address registers
+ * for the first 15 multicast addresses, and hashes the rest into the
+ * multicast table.
+ *****************************************************************************/
+void
+ixgb_mc_addr_list_update(struct ixgb_hw *hw,
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 pad)
+{
+ u32 hash_value;
+ u32 i;
+ u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
+ u8 *mca;
+
+ ENTER();
+
+ /* Set the new number of MC addresses that we are being requested to use. */
+ hw->num_mc_addrs = mc_addr_count;
+
+ /* Clear RAR[1-15] */
+ pr_debug("Clearing RAR[1-15]\n");
+ for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
+ IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
+ }
+
+ /* Clear the MTA */
+ pr_debug("Clearing MTA\n");
+ for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
+ IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
+
+ /* Add the new addresses */
+ mca = mc_addr_list;
+ for (i = 0; i < mc_addr_count; i++) {
+ pr_debug("Adding the multicast addresses:\n");
+ pr_debug("MC Addr #%d = %pM\n", i, mca);
+
+ /* Place this multicast address in the RAR if there is room, *
+ * else put it in the MTA
+ */
+ if (rar_used_count < IXGB_RAR_ENTRIES) {
+ ixgb_rar_set(hw, mca, rar_used_count);
+ pr_debug("Added a multicast address to RAR[%d]\n", i);
+ rar_used_count++;
+ } else {
+ hash_value = ixgb_hash_mc_addr(hw, mca);
+
+ pr_debug("Hash value = 0x%03X\n", hash_value);
+
+ ixgb_mta_set(hw, hash_value);
+ }
+
+ mca += IXGB_ETH_LENGTH_OF_ADDRESS + pad;
+ }
+
+ pr_debug("MC Update Complete\n");
+}
+
+/******************************************************************************
+ * Hashes an address to determine its location in the multicast table
+ *
+ * hw - Struct containing variables accessed by shared code
+ * mc_addr - the multicast address to hash
+ *
+ * Returns:
+ * The hash value
+ *****************************************************************************/
+static u32
+ixgb_hash_mc_addr(struct ixgb_hw *hw,
+ u8 *mc_addr)
+{
+ u32 hash_value = 0;
+
+ ENTER();
+
+ /* The portion of the address that is used for the hash table is
+ * determined by the mc_filter_type setting.
+ */
+ switch (hw->mc_filter_type) {
+ /* [0] [1] [2] [3] [4] [5]
+ * 01 AA 00 12 34 56
+ * LSB MSB - According to H/W docs */
+ case 0:
+ /* [47:36] i.e. 0x563 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
+ break;
+ case 1: /* [46:35] i.e. 0xAC6 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
+ break;
+ case 2: /* [45:34] i.e. 0x5D8 for above example address */
+ hash_value =
+ ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
+ break;
+ case 3: /* [43:32] i.e. 0x634 for above example address */
+ hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
+ break;
+ default:
+ /* Invalid mc_filter_type, what should we do? */
+ pr_debug("MC filter type param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ hash_value &= 0xFFF;
+ return hash_value;
+}
+
+/******************************************************************************
+ * Sets the bit in the multicast table corresponding to the hash value.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * hash_value - Multicast address hash value
+ *****************************************************************************/
+static void
+ixgb_mta_set(struct ixgb_hw *hw,
+ u32 hash_value)
+{
+ u32 hash_bit, hash_reg;
+ u32 mta_reg;
+
+ /* The MTA is a register array of 128 32-bit registers.
+ * It is treated like an array of 4096 bits. We want to set
+ * bit BitArray[hash_value]. So we figure out what register
+ * the bit is in, read it, OR in the new bit, then write
+ * back the new value. The register is determined by the
+ * upper 7 bits of the hash value and the bit within that
+ * register are determined by the lower 5 bits of the value.
+ */
+ hash_reg = (hash_value >> 5) & 0x7F;
+ hash_bit = hash_value & 0x1F;
+
+ mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg);
+
+ mta_reg |= (1 << hash_bit);
+
+ IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg);
+}
+
+/******************************************************************************
+ * Puts an ethernet address into a receive address register.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * addr - Address to put into receive address register
+ * index - Receive address register to write
+ *****************************************************************************/
+void
+ixgb_rar_set(struct ixgb_hw *hw,
+ u8 *addr,
+ u32 index)
+{
+ u32 rar_low, rar_high;
+
+ ENTER();
+
+ /* HW expects these in little endian so we reverse the byte order
+ * from network order (big endian) to little endian
+ */
+ rar_low = ((u32) addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+
+ rar_high = ((u32) addr[4] |
+ ((u32)addr[5] << 8) |
+ IXGB_RAH_AV);
+
+ IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
+ IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
+}
+
+/******************************************************************************
+ * Writes a value to the specified offset in the VLAN filter table.
+ *
+ * hw - Struct containing variables accessed by shared code
+ * offset - Offset in VLAN filer table to write
+ * value - Value to write into VLAN filter table
+ *****************************************************************************/
+void
+ixgb_write_vfta(struct ixgb_hw *hw,
+ u32 offset,
+ u32 value)
+{
+ IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value);
+}
+
+/******************************************************************************
+ * Clears the VLAN filer table
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clear_vfta(struct ixgb_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
+ IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
+}
+
+/******************************************************************************
+ * Configures the flow control settings based on SW configuration.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+
+static bool
+ixgb_setup_fc(struct ixgb_hw *hw)
+{
+ u32 ctrl_reg;
+ u32 pap_reg = 0; /* by default, assume no pause time */
+ bool status = true;
+
+ ENTER();
+
+ /* Get the current control reg 0 settings */
+ ctrl_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* Clear the Receive Pause Enable and Transmit Pause Enable bits */
+ ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
+
+ /* The possible values of the "flow_control" parameter are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames
+ * but we do not support receiving pause frames).
+ * 3: Both Rx and TX flow control (symmetric) are enabled.
+ * other: Invalid.
+ */
+ switch (hw->fc.type) {
+ case ixgb_fc_none: /* 0 */
+ /* Set CMDC bit to disable Rx Flow control */
+ ctrl_reg |= (IXGB_CTRL0_CMDC);
+ break;
+ case ixgb_fc_rx_pause: /* 1 */
+ /* RX Flow control is enabled, and TX Flow control is
+ * disabled.
+ */
+ ctrl_reg |= (IXGB_CTRL0_RPE);
+ break;
+ case ixgb_fc_tx_pause: /* 2 */
+ /* TX Flow control is enabled, and RX Flow control is
+ * disabled, by a software over-ride.
+ */
+ ctrl_reg |= (IXGB_CTRL0_TPE);
+ pap_reg = hw->fc.pause_time;
+ break;
+ case ixgb_fc_full: /* 3 */
+ /* Flow control (both RX and TX) is enabled by a software
+ * over-ride.
+ */
+ ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
+ pap_reg = hw->fc.pause_time;
+ break;
+ default:
+ /* We should never get here. The value should be 0-3. */
+ pr_debug("Flow control param set incorrectly\n");
+ ASSERT(0);
+ break;
+ }
+
+ /* Write the new settings */
+ IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
+
+ if (pap_reg != 0)
+ IXGB_WRITE_REG(hw, PAP, pap_reg);
+
+ /* Set the flow control receive threshold registers. Normally,
+ * these registers will be set to a default threshold that may be
+ * adjusted later by the driver's runtime code. However, if the
+ * ability to transmit pause frames in not enabled, then these
+ * registers will be set to 0.
+ */
+ if (!(hw->fc.type & ixgb_fc_tx_pause)) {
+ IXGB_WRITE_REG(hw, FCRTL, 0);
+ IXGB_WRITE_REG(hw, FCRTH, 0);
+ } else {
+ /* We need to set up the Receive Threshold high and low water
+ * marks as well as (optionally) enabling the transmission of XON
+ * frames. */
+ if (hw->fc.send_xon) {
+ IXGB_WRITE_REG(hw, FCRTL,
+ (hw->fc.low_water | IXGB_FCRTL_XONE));
+ } else {
+ IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water);
+ }
+ IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water);
+ }
+ return status;
+}
+
+/******************************************************************************
+ * Reads a word from a device over the Management Data Interface (MDI) bus.
+ * This interface is used to manage Physical layer devices.
+ *
+ * hw - Struct containing variables accessed by hw code
+ * reg_address - Offset of device register being read.
+ * phy_address - Address of device on MDI.
+ *
+ * Returns: Data word (16 bits) from MDI device.
+ *
+ * The 82597EX has support for several MDI access methods. This routine
+ * uses the new protocol MDI Single Command and Address Operation.
+ * This requires that first an address cycle command is sent, followed by a
+ * read command.
+ *****************************************************************************/
+static u16
+ixgb_read_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type)
+{
+ u32 i;
+ u32 data;
+ u32 command = 0;
+
+ ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
+ ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
+ ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the address cycle completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** This may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Address cycle complete, setup and write the read command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the read command completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** The read may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Operation is complete, get the data from the MDIO Read/Write Data
+ * register and return.
+ */
+ data = IXGB_READ_REG(hw, MSRWD);
+ data >>= IXGB_MSRWD_READ_DATA_SHIFT;
+ return((u16) data);
+}
+
+/******************************************************************************
+ * Writes a word to a device over the Management Data Interface (MDI) bus.
+ * This interface is used to manage Physical layer devices.
+ *
+ * hw - Struct containing variables accessed by hw code
+ * reg_address - Offset of device register being read.
+ * phy_address - Address of device on MDI.
+ * device_type - Also known as the Device ID or DID.
+ * data - 16-bit value to be written
+ *
+ * Returns: void.
+ *
+ * The 82597EX has support for several MDI access methods. This routine
+ * uses the new protocol MDI Single Command and Address Operation.
+ * This requires that first an address cycle command is sent, followed by a
+ * write command.
+ *****************************************************************************/
+static void
+ixgb_write_phy_reg(struct ixgb_hw *hw,
+ u32 reg_address,
+ u32 phy_address,
+ u32 device_type,
+ u16 data)
+{
+ u32 i;
+ u32 command = 0;
+
+ ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
+ ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
+ ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
+
+ /* Put the data in the MDIO Read/Write Data register */
+ IXGB_WRITE_REG(hw, MSRWD, (u32)data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the address cycle completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** This may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Address cycle complete, setup and write the write command */
+ command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
+ (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
+ (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND));
+
+ IXGB_WRITE_REG(hw, MSCA, command);
+
+ /**************************************************************
+ ** Check every 10 usec to see if the read command completed
+ ** The COMMAND bit will clear when the operation is complete.
+ ** The write may take as long as 64 usecs (we'll wait 100 usecs max)
+ ** from the CPU Write to the Ready bit assertion.
+ **************************************************************/
+
+ for (i = 0; i < 10; i++)
+ {
+ udelay(10);
+
+ command = IXGB_READ_REG(hw, MSCA);
+
+ if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
+
+ /* Operation is complete, return. */
+}
+
+/******************************************************************************
+ * Checks to see if the link status of the hardware has changed.
+ *
+ * hw - Struct containing variables accessed by hw code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+void
+ixgb_check_for_link(struct ixgb_hw *hw)
+{
+ u32 status_reg;
+ u32 xpcss_reg;
+
+ ENTER();
+
+ xpcss_reg = IXGB_READ_REG(hw, XPCSS);
+ status_reg = IXGB_READ_REG(hw, STATUS);
+
+ if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
+ (status_reg & IXGB_STATUS_LU)) {
+ hw->link_up = true;
+ } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
+ (status_reg & IXGB_STATUS_LU)) {
+ pr_debug("XPCSS Not Aligned while Status:LU is set\n");
+ hw->link_up = ixgb_link_reset(hw);
+ } else {
+ /*
+ * 82597EX errata. Since the lane deskew problem may prevent
+ * link, reset the link before reporting link down.
+ */
+ hw->link_up = ixgb_link_reset(hw);
+ }
+ /* Anything else for 10 Gig?? */
+}
+
+/******************************************************************************
+ * Check for a bad link condition that may have occurred.
+ * The indication is that the RFC / LFC registers may be incrementing
+ * continually. A full adapter reset is required to recover.
+ *
+ * hw - Struct containing variables accessed by hw code
+ *
+ * Called by any function that needs to check the link status of the adapter.
+ *****************************************************************************/
+bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
+{
+ u32 newLFC, newRFC;
+ bool bad_link_returncode = false;
+
+ if (hw->phy_type == ixgb_phy_type_txn17401) {
+ newLFC = IXGB_READ_REG(hw, LFC);
+ newRFC = IXGB_READ_REG(hw, RFC);
+ if ((hw->lastLFC + 250 < newLFC)
+ || (hw->lastRFC + 250 < newRFC)) {
+ pr_debug("BAD LINK! too many LFC/RFC since last check\n");
+ bad_link_returncode = true;
+ }
+ hw->lastLFC = newLFC;
+ hw->lastRFC = newRFC;
+ }
+
+ return bad_link_returncode;
+}
+
+/******************************************************************************
+ * Clears all hardware statistics counters.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
+{
+ volatile u32 temp_reg;
+
+ ENTER();
+
+ /* if we are stopped or resetting exit gracefully */
+ if (hw->adapter_stopped) {
+ pr_debug("Exiting because the adapter is stopped!!!\n");
+ return;
+ }
+
+ temp_reg = IXGB_READ_REG(hw, TPRL);
+ temp_reg = IXGB_READ_REG(hw, TPRH);
+ temp_reg = IXGB_READ_REG(hw, GPRCL);
+ temp_reg = IXGB_READ_REG(hw, GPRCH);
+ temp_reg = IXGB_READ_REG(hw, BPRCL);
+ temp_reg = IXGB_READ_REG(hw, BPRCH);
+ temp_reg = IXGB_READ_REG(hw, MPRCL);
+ temp_reg = IXGB_READ_REG(hw, MPRCH);
+ temp_reg = IXGB_READ_REG(hw, UPRCL);
+ temp_reg = IXGB_READ_REG(hw, UPRCH);
+ temp_reg = IXGB_READ_REG(hw, VPRCL);
+ temp_reg = IXGB_READ_REG(hw, VPRCH);
+ temp_reg = IXGB_READ_REG(hw, JPRCL);
+ temp_reg = IXGB_READ_REG(hw, JPRCH);
+ temp_reg = IXGB_READ_REG(hw, GORCL);
+ temp_reg = IXGB_READ_REG(hw, GORCH);
+ temp_reg = IXGB_READ_REG(hw, TORL);
+ temp_reg = IXGB_READ_REG(hw, TORH);
+ temp_reg = IXGB_READ_REG(hw, RNBC);
+ temp_reg = IXGB_READ_REG(hw, RUC);
+ temp_reg = IXGB_READ_REG(hw, ROC);
+ temp_reg = IXGB_READ_REG(hw, RLEC);
+ temp_reg = IXGB_READ_REG(hw, CRCERRS);
+ temp_reg = IXGB_READ_REG(hw, ICBC);
+ temp_reg = IXGB_READ_REG(hw, ECBC);
+ temp_reg = IXGB_READ_REG(hw, MPC);
+ temp_reg = IXGB_READ_REG(hw, TPTL);
+ temp_reg = IXGB_READ_REG(hw, TPTH);
+ temp_reg = IXGB_READ_REG(hw, GPTCL);
+ temp_reg = IXGB_READ_REG(hw, GPTCH);
+ temp_reg = IXGB_READ_REG(hw, BPTCL);
+ temp_reg = IXGB_READ_REG(hw, BPTCH);
+ temp_reg = IXGB_READ_REG(hw, MPTCL);
+ temp_reg = IXGB_READ_REG(hw, MPTCH);
+ temp_reg = IXGB_READ_REG(hw, UPTCL);
+ temp_reg = IXGB_READ_REG(hw, UPTCH);
+ temp_reg = IXGB_READ_REG(hw, VPTCL);
+ temp_reg = IXGB_READ_REG(hw, VPTCH);
+ temp_reg = IXGB_READ_REG(hw, JPTCL);
+ temp_reg = IXGB_READ_REG(hw, JPTCH);
+ temp_reg = IXGB_READ_REG(hw, GOTCL);
+ temp_reg = IXGB_READ_REG(hw, GOTCH);
+ temp_reg = IXGB_READ_REG(hw, TOTL);
+ temp_reg = IXGB_READ_REG(hw, TOTH);
+ temp_reg = IXGB_READ_REG(hw, DC);
+ temp_reg = IXGB_READ_REG(hw, PLT64C);
+ temp_reg = IXGB_READ_REG(hw, TSCTC);
+ temp_reg = IXGB_READ_REG(hw, TSCTFC);
+ temp_reg = IXGB_READ_REG(hw, IBIC);
+ temp_reg = IXGB_READ_REG(hw, RFC);
+ temp_reg = IXGB_READ_REG(hw, LFC);
+ temp_reg = IXGB_READ_REG(hw, PFRC);
+ temp_reg = IXGB_READ_REG(hw, PFTC);
+ temp_reg = IXGB_READ_REG(hw, MCFRC);
+ temp_reg = IXGB_READ_REG(hw, MCFTC);
+ temp_reg = IXGB_READ_REG(hw, XONRXC);
+ temp_reg = IXGB_READ_REG(hw, XONTXC);
+ temp_reg = IXGB_READ_REG(hw, XOFFRXC);
+ temp_reg = IXGB_READ_REG(hw, XOFFTXC);
+ temp_reg = IXGB_READ_REG(hw, RJC);
+}
+
+/******************************************************************************
+ * Turns on the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void
+ixgb_led_on(struct ixgb_hw *hw)
+{
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* To turn on the LED, clear software-definable pin 0 (SDP0). */
+ ctrl0_reg &= ~IXGB_CTRL0_SDP0;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
+}
+
+/******************************************************************************
+ * Turns off the software controllable LED
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+void
+ixgb_led_off(struct ixgb_hw *hw)
+{
+ u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
+
+ /* To turn off the LED, set software-definable pin 0 (SDP0). */
+ ctrl0_reg |= IXGB_CTRL0_SDP0;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
+}
+
+/******************************************************************************
+ * Gets the current PCI bus type, speed, and width of the hardware
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_get_bus_info(struct ixgb_hw *hw)
+{
+ u32 status_reg;
+
+ status_reg = IXGB_READ_REG(hw, STATUS);
+
+ hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ?
+ ixgb_bus_type_pcix : ixgb_bus_type_pci;
+
+ if (hw->bus.type == ixgb_bus_type_pci) {
+ hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ?
+ ixgb_bus_speed_66 : ixgb_bus_speed_33;
+ } else {
+ switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) {
+ case IXGB_STATUS_PCIX_SPD_66:
+ hw->bus.speed = ixgb_bus_speed_66;
+ break;
+ case IXGB_STATUS_PCIX_SPD_100:
+ hw->bus.speed = ixgb_bus_speed_100;
+ break;
+ case IXGB_STATUS_PCIX_SPD_133:
+ hw->bus.speed = ixgb_bus_speed_133;
+ break;
+ default:
+ hw->bus.speed = ixgb_bus_speed_reserved;
+ break;
+ }
+ }
+
+ hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ?
+ ixgb_bus_width_64 : ixgb_bus_width_32;
+}
+
+/******************************************************************************
+ * Tests a MAC address to ensure it is a valid Individual Address
+ *
+ * mac_addr - pointer to MAC address.
+ *
+ *****************************************************************************/
+static bool
+mac_addr_valid(u8 *mac_addr)
+{
+ bool is_valid = true;
+ ENTER();
+
+ /* Make sure it is not a multicast address */
+ if (is_multicast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is multicast\n");
+ is_valid = false;
+ }
+ /* Not a broadcast address */
+ else if (is_broadcast_ether_addr(mac_addr)) {
+ pr_debug("MAC address is broadcast\n");
+ is_valid = false;
+ }
+ /* Reject the zero address */
+ else if (is_zero_ether_addr(mac_addr)) {
+ pr_debug("MAC address is all zeros\n");
+ is_valid = false;
+ }
+ return is_valid;
+}
+
+/******************************************************************************
+ * Resets the 10GbE link. Waits the settle time and returns the state of
+ * the link.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static bool
+ixgb_link_reset(struct ixgb_hw *hw)
+{
+ bool link_status = false;
+ u8 wait_retries = MAX_RESET_ITERATIONS;
+ u8 lrst_retries = MAX_RESET_ITERATIONS;
+
+ do {
+ /* Reset the link */
+ IXGB_WRITE_REG(hw, CTRL0,
+ IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST);
+
+ /* Wait for link-up and lane re-alignment */
+ do {
+ udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET);
+ link_status =
+ ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU)
+ && (IXGB_READ_REG(hw, XPCSS) &
+ IXGB_XPCSS_ALIGN_STATUS)) ? true : false;
+ } while (!link_status && --wait_retries);
+
+ } while (!link_status && --lrst_retries);
+
+ return link_status;
+}
+
+/******************************************************************************
+ * Resets the 10GbE optics module.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+static void
+ixgb_optics_reset(struct ixgb_hw *hw)
+{
+ if (hw->phy_type == ixgb_phy_type_txn17401) {
+ u16 mdio_reg;
+
+ ixgb_write_phy_reg(hw,
+ MDIO_CTRL1,
+ IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD,
+ MDIO_CTRL1_RESET);
+
+ mdio_reg = ixgb_read_phy_reg(hw,
+ MDIO_CTRL1,
+ IXGB_PHY_ADDRESS,
+ MDIO_MMD_PMAPMD);
+ }
+}
+
+/******************************************************************************
+ * Resets the 10GbE optics module for Sun variant NIC.
+ *
+ * hw - Struct containing variables accessed by shared code
+ *****************************************************************************/
+
+#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803
+#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164
+#define IXGB_BCM8704_USER_CTRL_REG 0xC800
+#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF
+#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003
+#define IXGB_SUN_PHY_ADDRESS 0x0000
+#define IXGB_SUN_PHY_RESET_DELAY 305
+
+static void
+ixgb_optics_reset_bcm(struct ixgb_hw *hw)
+{
+ u32 ctrl = IXGB_READ_REG(hw, CTRL0);
+ ctrl &= ~IXGB_CTRL0_SDP2;
+ ctrl |= IXGB_CTRL0_SDP3;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl);
+ IXGB_WRITE_FLUSH(hw);
+
+ /* SerDes needs extra delay */
+ msleep(IXGB_SUN_PHY_RESET_DELAY);
+
+ /* Broadcom 7408L configuration */
+ /* Reference clock config */
+ ixgb_write_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL);
+ /* we must read the registers twice */
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+
+ ixgb_write_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR,
+ IXGB_BCM8704_USER_CTRL_REG_VAL);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+ ixgb_read_phy_reg(hw,
+ IXGB_BCM8704_USER_CTRL_REG,
+ IXGB_SUN_PHY_ADDRESS,
+ IXGB_BCM8704_USER_DEV3_ADDR);
+
+ /* SerDes needs extra delay */
+ msleep(IXGB_SUN_PHY_RESET_DELAY);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_HW_H_
+#define _IXGB_HW_H_
+
+#include <linux/mdio.h>
+
+#include "ixgb_osdep.h"
+
+/* Enums */
+typedef enum {
+ ixgb_mac_unknown = 0,
+ ixgb_82597,
+ ixgb_num_macs
+} ixgb_mac_type;
+
+/* Types of physical layer modules */
+typedef enum {
+ ixgb_phy_type_unknown = 0,
+ ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */
+ ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */
+ ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */
+ ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */
+ ixgb_phy_type_bcm /* SUN specific board */
+} ixgb_phy_type;
+
+/* XPAK transceiver vendors, for the SR adapters */
+typedef enum {
+ ixgb_xpak_vendor_intel,
+ ixgb_xpak_vendor_infineon
+} ixgb_xpak_vendor;
+
+/* Media Types */
+typedef enum {
+ ixgb_media_type_unknown = 0,
+ ixgb_media_type_fiber = 1,
+ ixgb_media_type_copper = 2,
+ ixgb_num_media_types
+} ixgb_media_type;
+
+/* Flow Control Settings */
+typedef enum {
+ ixgb_fc_none = 0,
+ ixgb_fc_rx_pause = 1,
+ ixgb_fc_tx_pause = 2,
+ ixgb_fc_full = 3,
+ ixgb_fc_default = 0xFF
+} ixgb_fc_type;
+
+/* PCI bus types */
+typedef enum {
+ ixgb_bus_type_unknown = 0,
+ ixgb_bus_type_pci,
+ ixgb_bus_type_pcix
+} ixgb_bus_type;
+
+/* PCI bus speeds */
+typedef enum {
+ ixgb_bus_speed_unknown = 0,
+ ixgb_bus_speed_33,
+ ixgb_bus_speed_66,
+ ixgb_bus_speed_100,
+ ixgb_bus_speed_133,
+ ixgb_bus_speed_reserved
+} ixgb_bus_speed;
+
+/* PCI bus widths */
+typedef enum {
+ ixgb_bus_width_unknown = 0,
+ ixgb_bus_width_32,
+ ixgb_bus_width_64
+} ixgb_bus_width;
+
+#define IXGB_ETH_LENGTH_OF_ADDRESS 6
+
+#define IXGB_EEPROM_SIZE 64 /* Size in words */
+
+#define SPEED_10000 10000
+#define FULL_DUPLEX 2
+
+#define MIN_NUMBER_OF_DESCRIPTORS 8
+#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */
+
+#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */
+#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */
+#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */
+
+#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */
+ /* NOTE: this is MICROSECONDS */
+#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */
+
+/* General Registers */
+#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */
+#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */
+#define IXGB_STATUS 0x00010 /* Device Status Register - RO */
+#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */
+#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */
+
+/* Interrupt */
+#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */
+#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */
+#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */
+#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */
+
+/* Receive */
+#define IXGB_RCTL 0x00100 /* RX Control - RW */
+#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */
+#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */
+#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */
+#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */
+#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */
+#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */
+#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */
+#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */
+#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */
+#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */
+#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */
+#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */
+#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */
+#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */
+#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */
+#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */
+#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8
+
+/* Transmit */
+#define IXGB_TCTL 0x00600 /* TX Control - RW */
+#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */
+#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */
+#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */
+#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */
+#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */
+#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */
+#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */
+#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */
+#define IXGB_PAP 0x00640 /* Pause and Pace - RW */
+#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8
+
+/* Physical */
+#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */
+#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */
+#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */
+#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */
+#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */
+#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */
+#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */
+#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */
+#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */
+#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */
+#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */
+#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */
+#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */
+
+/* Wake-up */
+#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */
+#define IXGB_WUS 0x00810 /* Wake Up Status - RO */
+#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */
+#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */
+#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */
+
+/* Statistics */
+#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */
+#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */
+#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */
+#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */
+#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */
+#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */
+#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */
+#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */
+#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */
+#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */
+#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */
+#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */
+#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */
+#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */
+#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */
+#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */
+#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */
+#define IXGB_TORH 0x02044 /* Total Octets Received (High) */
+#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */
+#define IXGB_RUC 0x02050 /* Receive Undersize Count */
+#define IXGB_ROC 0x02058 /* Receive Oversize Count */
+#define IXGB_RLEC 0x02060 /* Receive Length Error Count */
+#define IXGB_CRCERRS 0x02068 /* CRC Error Count */
+#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */
+#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */
+#define IXGB_MPC 0x02080 /* Missed Packets Count */
+#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */
+#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */
+#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */
+#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */
+#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */
+#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */
+#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */
+#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */
+#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */
+#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */
+#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */
+#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */
+#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */
+#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */
+#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */
+#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */
+#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */
+#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */
+#define IXGB_DC 0x02148 /* Defer Count */
+#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */
+#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */
+#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */
+#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */
+#define IXGB_RFC 0x02188 /* Remote Fault Count */
+#define IXGB_LFC 0x02190 /* Local Fault Count */
+#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */
+#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */
+#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */
+#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */
+#define IXGB_XONRXC 0x021B8 /* XON Received Count */
+#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */
+#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */
+#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */
+#define IXGB_RJC 0x021D8 /* Receive Jabber Count */
+
+/* CTRL0 Bit Masks */
+#define IXGB_CTRL0_LRST 0x00000008
+#define IXGB_CTRL0_JFE 0x00000010
+#define IXGB_CTRL0_XLE 0x00000020
+#define IXGB_CTRL0_MDCS 0x00000040
+#define IXGB_CTRL0_CMDC 0x00000080
+#define IXGB_CTRL0_SDP0 0x00040000
+#define IXGB_CTRL0_SDP1 0x00080000
+#define IXGB_CTRL0_SDP2 0x00100000
+#define IXGB_CTRL0_SDP3 0x00200000
+#define IXGB_CTRL0_SDP0_DIR 0x00400000
+#define IXGB_CTRL0_SDP1_DIR 0x00800000
+#define IXGB_CTRL0_SDP2_DIR 0x01000000
+#define IXGB_CTRL0_SDP3_DIR 0x02000000
+#define IXGB_CTRL0_RST 0x04000000
+#define IXGB_CTRL0_RPE 0x08000000
+#define IXGB_CTRL0_TPE 0x10000000
+#define IXGB_CTRL0_VME 0x40000000
+
+/* CTRL1 Bit Masks */
+#define IXGB_CTRL1_GPI0_EN 0x00000001
+#define IXGB_CTRL1_GPI1_EN 0x00000002
+#define IXGB_CTRL1_GPI2_EN 0x00000004
+#define IXGB_CTRL1_GPI3_EN 0x00000008
+#define IXGB_CTRL1_SDP4 0x00000010
+#define IXGB_CTRL1_SDP5 0x00000020
+#define IXGB_CTRL1_SDP6 0x00000040
+#define IXGB_CTRL1_SDP7 0x00000080
+#define IXGB_CTRL1_SDP4_DIR 0x00000100
+#define IXGB_CTRL1_SDP5_DIR 0x00000200
+#define IXGB_CTRL1_SDP6_DIR 0x00000400
+#define IXGB_CTRL1_SDP7_DIR 0x00000800
+#define IXGB_CTRL1_EE_RST 0x00002000
+#define IXGB_CTRL1_RO_DIS 0x00020000
+#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000
+#define IXGB_CTRL1_PCIXHM_1_2 0x00000000
+#define IXGB_CTRL1_PCIXHM_5_8 0x00400000
+#define IXGB_CTRL1_PCIXHM_3_4 0x00800000
+#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000
+
+/* STATUS Bit Masks */
+#define IXGB_STATUS_LU 0x00000002
+#define IXGB_STATUS_AIP 0x00000004
+#define IXGB_STATUS_TXOFF 0x00000010
+#define IXGB_STATUS_XAUIME 0x00000020
+#define IXGB_STATUS_RES 0x00000040
+#define IXGB_STATUS_RIS 0x00000080
+#define IXGB_STATUS_RIE 0x00000100
+#define IXGB_STATUS_RLF 0x00000200
+#define IXGB_STATUS_RRF 0x00000400
+#define IXGB_STATUS_PCI_SPD 0x00000800
+#define IXGB_STATUS_BUS64 0x00001000
+#define IXGB_STATUS_PCIX_MODE 0x00002000
+#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000
+#define IXGB_STATUS_PCIX_SPD_66 0x00000000
+#define IXGB_STATUS_PCIX_SPD_100 0x00004000
+#define IXGB_STATUS_PCIX_SPD_133 0x00008000
+#define IXGB_STATUS_REV_ID_MASK 0x000F0000
+#define IXGB_STATUS_REV_ID_SHIFT 16
+
+/* EECD Bit Masks */
+#define IXGB_EECD_SK 0x00000001
+#define IXGB_EECD_CS 0x00000002
+#define IXGB_EECD_DI 0x00000004
+#define IXGB_EECD_DO 0x00000008
+#define IXGB_EECD_FWE_MASK 0x00000030
+#define IXGB_EECD_FWE_DIS 0x00000010
+#define IXGB_EECD_FWE_EN 0x00000020
+
+/* MFS */
+#define IXGB_MFS_SHIFT 16
+
+/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */
+#define IXGB_INT_TXDW 0x00000001
+#define IXGB_INT_TXQE 0x00000002
+#define IXGB_INT_LSC 0x00000004
+#define IXGB_INT_RXSEQ 0x00000008
+#define IXGB_INT_RXDMT0 0x00000010
+#define IXGB_INT_RXO 0x00000040
+#define IXGB_INT_RXT0 0x00000080
+#define IXGB_INT_AUTOSCAN 0x00000200
+#define IXGB_INT_GPI0 0x00000800
+#define IXGB_INT_GPI1 0x00001000
+#define IXGB_INT_GPI2 0x00002000
+#define IXGB_INT_GPI3 0x00004000
+
+/* RCTL Bit Masks */
+#define IXGB_RCTL_RXEN 0x00000002
+#define IXGB_RCTL_SBP 0x00000004
+#define IXGB_RCTL_UPE 0x00000008
+#define IXGB_RCTL_MPE 0x00000010
+#define IXGB_RCTL_RDMTS_MASK 0x00000300
+#define IXGB_RCTL_RDMTS_1_2 0x00000000
+#define IXGB_RCTL_RDMTS_1_4 0x00000100
+#define IXGB_RCTL_RDMTS_1_8 0x00000200
+#define IXGB_RCTL_MO_MASK 0x00003000
+#define IXGB_RCTL_MO_47_36 0x00000000
+#define IXGB_RCTL_MO_46_35 0x00001000
+#define IXGB_RCTL_MO_45_34 0x00002000
+#define IXGB_RCTL_MO_43_32 0x00003000
+#define IXGB_RCTL_MO_SHIFT 12
+#define IXGB_RCTL_BAM 0x00008000
+#define IXGB_RCTL_BSIZE_MASK 0x00030000
+#define IXGB_RCTL_BSIZE_2048 0x00000000
+#define IXGB_RCTL_BSIZE_4096 0x00010000
+#define IXGB_RCTL_BSIZE_8192 0x00020000
+#define IXGB_RCTL_BSIZE_16384 0x00030000
+#define IXGB_RCTL_VFE 0x00040000
+#define IXGB_RCTL_CFIEN 0x00080000
+#define IXGB_RCTL_CFI 0x00100000
+#define IXGB_RCTL_RPDA_MASK 0x00600000
+#define IXGB_RCTL_RPDA_MC_MAC 0x00000000
+#define IXGB_RCTL_MC_ONLY 0x00400000
+#define IXGB_RCTL_CFF 0x00800000
+#define IXGB_RCTL_SECRC 0x04000000
+#define IXGB_RDT_FPDB 0x80000000
+
+#define IXGB_RCTL_IDLE_RX_UNIT 0
+
+/* FCRTL Bit Masks */
+#define IXGB_FCRTL_XONE 0x80000000
+
+/* RXDCTL Bit Masks */
+#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF
+#define IXGB_RXDCTL_PTHRESH_SHIFT 0
+#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00
+#define IXGB_RXDCTL_HTHRESH_SHIFT 9
+#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000
+#define IXGB_RXDCTL_WTHRESH_SHIFT 18
+
+/* RAIDC Bit Masks */
+#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F
+#define IXGB_RAIDC_DELAY_MASK 0x000FF800
+#define IXGB_RAIDC_DELAY_SHIFT 11
+#define IXGB_RAIDC_POLL_MASK 0x1FF00000
+#define IXGB_RAIDC_POLL_SHIFT 20
+#define IXGB_RAIDC_RXT_GATE 0x40000000
+#define IXGB_RAIDC_EN 0x80000000
+
+#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220
+#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244
+#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122
+#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61
+
+/* RXCSUM Bit Masks */
+#define IXGB_RXCSUM_IPOFL 0x00000100
+#define IXGB_RXCSUM_TUOFL 0x00000200
+
+/* RAH Bit Masks */
+#define IXGB_RAH_ASEL_MASK 0x00030000
+#define IXGB_RAH_ASEL_DEST 0x00000000
+#define IXGB_RAH_ASEL_SRC 0x00010000
+#define IXGB_RAH_AV 0x80000000
+
+/* TCTL Bit Masks */
+#define IXGB_TCTL_TCE 0x00000001
+#define IXGB_TCTL_TXEN 0x00000002
+#define IXGB_TCTL_TPDE 0x00000004
+
+#define IXGB_TCTL_IDLE_TX_UNIT 0
+
+/* TXDCTL Bit Masks */
+#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F
+#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00
+#define IXGB_TXDCTL_HTHRESH_SHIFT 8
+#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000
+#define IXGB_TXDCTL_WTHRESH_SHIFT 16
+
+/* TSPMT Bit Masks */
+#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF
+#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000
+#define IXGB_TSPMT_TSPBP_SHIFT 16
+
+/* PAP Bit Masks */
+#define IXGB_PAP_TXPC_MASK 0x0000FFFF
+#define IXGB_PAP_TXPV_MASK 0x000F0000
+#define IXGB_PAP_TXPV_10G 0x00000000
+#define IXGB_PAP_TXPV_1G 0x00010000
+#define IXGB_PAP_TXPV_2G 0x00020000
+#define IXGB_PAP_TXPV_3G 0x00030000
+#define IXGB_PAP_TXPV_4G 0x00040000
+#define IXGB_PAP_TXPV_5G 0x00050000
+#define IXGB_PAP_TXPV_6G 0x00060000
+#define IXGB_PAP_TXPV_7G 0x00070000
+#define IXGB_PAP_TXPV_8G 0x00080000
+#define IXGB_PAP_TXPV_9G 0x00090000
+#define IXGB_PAP_TXPV_WAN 0x000F0000
+
+/* PCSC1 Bit Masks */
+#define IXGB_PCSC1_LOOPBACK 0x00004000
+
+/* PCSC2 Bit Masks */
+#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003
+#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001
+
+/* PCSS1 Bit Masks */
+#define IXGB_PCSS1_LOCAL_FAULT 0x00000080
+#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004
+
+/* PCSS2 Bit Masks */
+#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000
+#define IXGB_PCSS2_DEV_PRES 0x00004000
+#define IXGB_PCSS2_TX_LF 0x00000800
+#define IXGB_PCSS2_RX_LF 0x00000400
+#define IXGB_PCSS2_10GBW 0x00000004
+#define IXGB_PCSS2_10GBX 0x00000002
+#define IXGB_PCSS2_10GBR 0x00000001
+
+/* XPCSS Bit Masks */
+#define IXGB_XPCSS_ALIGN_STATUS 0x00001000
+#define IXGB_XPCSS_PATTERN_TEST 0x00000800
+#define IXGB_XPCSS_LANE_3_SYNC 0x00000008
+#define IXGB_XPCSS_LANE_2_SYNC 0x00000004
+#define IXGB_XPCSS_LANE_1_SYNC 0x00000002
+#define IXGB_XPCSS_LANE_0_SYNC 0x00000001
+
+/* XPCSTC Bit Masks */
+#define IXGB_XPCSTC_BERT_TRIG 0x00200000
+#define IXGB_XPCSTC_BERT_SST 0x00100000
+#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000
+#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17
+#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003
+#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001
+#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000
+
+/* MSCA bit Masks */
+/* New Protocol Address */
+#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF
+#define IXGB_MSCA_NP_ADDR_SHIFT 0
+/* Either Device Type or Register Address,depending on ST_CODE */
+#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000
+#define IXGB_MSCA_DEV_TYPE_SHIFT 16
+#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000
+#define IXGB_MSCA_PHY_ADDR_SHIFT 21
+#define IXGB_MSCA_OP_CODE_MASK 0x0C000000
+/* OP_CODE == 00, Address cycle, New Protocol */
+/* OP_CODE == 01, Write operation */
+/* OP_CODE == 10, Read operation */
+/* OP_CODE == 11, Read, auto increment, New Protocol */
+#define IXGB_MSCA_ADDR_CYCLE 0x00000000
+#define IXGB_MSCA_WRITE 0x04000000
+#define IXGB_MSCA_READ 0x08000000
+#define IXGB_MSCA_READ_AUTOINC 0x0C000000
+#define IXGB_MSCA_OP_CODE_SHIFT 26
+#define IXGB_MSCA_ST_CODE_MASK 0x30000000
+/* ST_CODE == 00, New Protocol */
+/* ST_CODE == 01, Old Protocol */
+#define IXGB_MSCA_NEW_PROTOCOL 0x00000000
+#define IXGB_MSCA_OLD_PROTOCOL 0x10000000
+#define IXGB_MSCA_ST_CODE_SHIFT 28
+/* Initiate command, self-clearing when command completes */
+#define IXGB_MSCA_MDI_COMMAND 0x40000000
+/*MDI In Progress Enable. */
+#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000
+
+/* MSRWD bit masks */
+#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF
+#define IXGB_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000
+#define IXGB_MSRWD_READ_DATA_SHIFT 16
+
+/* Definitions for the optics devices on the MDIO bus. */
+#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */
+
+#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */
+
+/* Vendor-specific MDIO registers */
+#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */
+#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */
+
+#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80
+#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00
+#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */
+
+/* Layout of a single receive descriptor. The controller assumes that this
+ * structure is packed into 16 bytes, which is a safe assumption with most
+ * compilers. However, some compilers may insert padding between the fields,
+ * in which case the structure must be packed in some compiler-specific
+ * manner. */
+struct ixgb_rx_desc {
+ __le64 buff_addr;
+ __le16 length;
+ __le16 reserved;
+ u8 status;
+ u8 errors;
+ __le16 special;
+};
+
+#define IXGB_RX_DESC_STATUS_DD 0x01
+#define IXGB_RX_DESC_STATUS_EOP 0x02
+#define IXGB_RX_DESC_STATUS_IXSM 0x04
+#define IXGB_RX_DESC_STATUS_VP 0x08
+#define IXGB_RX_DESC_STATUS_TCPCS 0x20
+#define IXGB_RX_DESC_STATUS_IPCS 0x40
+#define IXGB_RX_DESC_STATUS_PIF 0x80
+
+#define IXGB_RX_DESC_ERRORS_CE 0x01
+#define IXGB_RX_DESC_ERRORS_SE 0x02
+#define IXGB_RX_DESC_ERRORS_P 0x08
+#define IXGB_RX_DESC_ERRORS_TCPE 0x20
+#define IXGB_RX_DESC_ERRORS_IPE 0x40
+#define IXGB_RX_DESC_ERRORS_RXE 0x80
+
+#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
+
+/* Layout of a single transmit descriptor. The controller assumes that this
+ * structure is packed into 16 bytes, which is a safe assumption with most
+ * compilers. However, some compilers may insert padding between the fields,
+ * in which case the structure must be packed in some compiler-specific
+ * manner. */
+struct ixgb_tx_desc {
+ __le64 buff_addr;
+ __le32 cmd_type_len;
+ u8 status;
+ u8 popts;
+ __le16 vlan;
+};
+
+#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF
+#define IXGB_TX_DESC_TYPE_MASK 0x00F00000
+#define IXGB_TX_DESC_TYPE_SHIFT 20
+#define IXGB_TX_DESC_CMD_MASK 0xFF000000
+#define IXGB_TX_DESC_CMD_SHIFT 24
+#define IXGB_TX_DESC_CMD_EOP 0x01000000
+#define IXGB_TX_DESC_CMD_TSE 0x04000000
+#define IXGB_TX_DESC_CMD_RS 0x08000000
+#define IXGB_TX_DESC_CMD_VLE 0x40000000
+#define IXGB_TX_DESC_CMD_IDE 0x80000000
+
+#define IXGB_TX_DESC_TYPE 0x00100000
+
+#define IXGB_TX_DESC_STATUS_DD 0x01
+
+#define IXGB_TX_DESC_POPTS_IXSM 0x01
+#define IXGB_TX_DESC_POPTS_TXSM 0x02
+#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */
+
+struct ixgb_context_desc {
+ u8 ipcss;
+ u8 ipcso;
+ __le16 ipcse;
+ u8 tucss;
+ u8 tucso;
+ __le16 tucse;
+ __le32 cmd_type_len;
+ u8 status;
+ u8 hdr_len;
+ __le16 mss;
+};
+
+#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000
+#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000
+#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000
+#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000
+#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000
+
+#define IXGB_CONTEXT_DESC_TYPE 0x00000000
+
+#define IXGB_CONTEXT_DESC_STATUS_DD 0x01
+
+/* Filters */
+#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
+#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
+#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */
+
+#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0
+#define ENET_HEADER_SIZE 14
+#define ENET_FCS_LENGTH 4
+#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128
+#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60
+#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514
+#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00
+
+/* Phy Addresses */
+#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */
+#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */
+#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */
+
+/* This structure takes a 64k flash and maps it for identification commands */
+struct ixgb_flash_buffer {
+ u8 manufacturer_id;
+ u8 device_id;
+ u8 filler1[0x2AA8];
+ u8 cmd2;
+ u8 filler2[0x2AAA];
+ u8 cmd1;
+ u8 filler3[0xAAAA];
+};
+
+/* Flow control parameters */
+struct ixgb_fc {
+ u32 high_water; /* Flow Control High-water */
+ u32 low_water; /* Flow Control Low-water */
+ u16 pause_time; /* Flow Control Pause timer */
+ bool send_xon; /* Flow control send XON */
+ ixgb_fc_type type; /* Type of flow control */
+};
+
+/* The historical defaults for the flow control values are given below. */
+#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
+#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
+#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
+
+/* Phy definitions */
+#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF
+#define IXGB_MAX_PHY_ADDRESS 31
+#define IXGB_MAX_PHY_DEV_TYPE 31
+
+/* Bus parameters */
+struct ixgb_bus {
+ ixgb_bus_speed speed;
+ ixgb_bus_width width;
+ ixgb_bus_type type;
+};
+
+struct ixgb_hw {
+ u8 __iomem *hw_addr;/* Base Address of the hardware */
+ void *back; /* Pointer to OS-dependent struct */
+ struct ixgb_fc fc; /* Flow control parameters */
+ struct ixgb_bus bus; /* Bus parameters */
+ u32 phy_id; /* Phy Identifier */
+ u32 phy_addr; /* XGMII address of Phy */
+ ixgb_mac_type mac_type; /* Identifier for MAC controller */
+ ixgb_phy_type phy_type; /* Transceiver/phy identifier */
+ u32 max_frame_size; /* Maximum frame size supported */
+ u32 mc_filter_type; /* Multicast filter hash type */
+ u32 num_mc_addrs; /* Number of current Multicast addrs */
+ u8 curr_mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; /* Individual address currently programmed in MAC */
+ u32 num_tx_desc; /* Number of Transmit descriptors */
+ u32 num_rx_desc; /* Number of Receive descriptors */
+ u32 rx_buffer_size; /* Size of Receive buffer */
+ bool link_up; /* true if link is valid */
+ bool adapter_stopped; /* State of adapter */
+ u16 device_id; /* device id from PCI configuration space */
+ u16 vendor_id; /* vendor id from PCI configuration space */
+ u8 revision_id; /* revision id from PCI configuration space */
+ u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
+ u16 subsystem_id; /* subsystem id from PCI configuration space */
+ u32 bar0; /* Base Address registers */
+ u32 bar1;
+ u32 bar2;
+ u32 bar3;
+ u16 pci_cmd_word; /* PCI command register id from PCI configuration space */
+ __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */
+ unsigned long io_base; /* Our I/O mapped location */
+ u32 lastLFC;
+ u32 lastRFC;
+};
+
+/* Statistics reported by the hardware */
+struct ixgb_hw_stats {
+ u64 tprl;
+ u64 tprh;
+ u64 gprcl;
+ u64 gprch;
+ u64 bprcl;
+ u64 bprch;
+ u64 mprcl;
+ u64 mprch;
+ u64 uprcl;
+ u64 uprch;
+ u64 vprcl;
+ u64 vprch;
+ u64 jprcl;
+ u64 jprch;
+ u64 gorcl;
+ u64 gorch;
+ u64 torl;
+ u64 torh;
+ u64 rnbc;
+ u64 ruc;
+ u64 roc;
+ u64 rlec;
+ u64 crcerrs;
+ u64 icbc;
+ u64 ecbc;
+ u64 mpc;
+ u64 tptl;
+ u64 tpth;
+ u64 gptcl;
+ u64 gptch;
+ u64 bptcl;
+ u64 bptch;
+ u64 mptcl;
+ u64 mptch;
+ u64 uptcl;
+ u64 uptch;
+ u64 vptcl;
+ u64 vptch;
+ u64 jptcl;
+ u64 jptch;
+ u64 gotcl;
+ u64 gotch;
+ u64 totl;
+ u64 toth;
+ u64 dc;
+ u64 plt64c;
+ u64 tsctc;
+ u64 tsctfc;
+ u64 ibic;
+ u64 rfc;
+ u64 lfc;
+ u64 pfrc;
+ u64 pftc;
+ u64 mcfrc;
+ u64 mcftc;
+ u64 xonrxc;
+ u64 xontxc;
+ u64 xoffrxc;
+ u64 xofftxc;
+ u64 rjc;
+};
+
+/* Function Prototypes */
+extern bool ixgb_adapter_stop(struct ixgb_hw *hw);
+extern bool ixgb_init_hw(struct ixgb_hw *hw);
+extern bool ixgb_adapter_start(struct ixgb_hw *hw);
+extern void ixgb_check_for_link(struct ixgb_hw *hw);
+extern bool ixgb_check_for_bad_link(struct ixgb_hw *hw);
+
+extern void ixgb_rar_set(struct ixgb_hw *hw,
+ u8 *addr,
+ u32 index);
+
+
+/* Filters (multicast, vlan, receive) */
+extern void ixgb_mc_addr_list_update(struct ixgb_hw *hw,
+ u8 *mc_addr_list,
+ u32 mc_addr_count,
+ u32 pad);
+
+/* Vfta functions */
+extern void ixgb_write_vfta(struct ixgb_hw *hw,
+ u32 offset,
+ u32 value);
+
+/* Access functions to eeprom data */
+void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr);
+u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw);
+u16 ixgb_get_ee_device_id(struct ixgb_hw *hw);
+bool ixgb_get_eeprom_data(struct ixgb_hw *hw);
+__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index);
+
+/* Everything else */
+void ixgb_led_on(struct ixgb_hw *hw);
+void ixgb_led_off(struct ixgb_hw *hw);
+void ixgb_write_pci_cfg(struct ixgb_hw *hw,
+ u32 reg,
+ u16 * value);
+
+
+#endif /* _IXGB_HW_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGB_IDS_H_
+#define _IXGB_IDS_H_
+
+/**********************************************************************
+** The Device and Vendor IDs for 10 Gigabit MACs
+**********************************************************************/
+
+#define INTEL_VENDOR_ID 0x8086
+#define INTEL_SUBVENDOR_ID 0x8086
+#define SUN_VENDOR_ID 0x108E
+#define SUN_SUBVENDOR_ID 0x108E
+
+#define IXGB_DEVICE_ID_82597EX 0x1048
+#define IXGB_DEVICE_ID_82597EX_SR 0x1A48
+#define IXGB_DEVICE_ID_82597EX_LR 0x1B48
+#define IXGB_SUBDEVICE_ID_A11F 0xA11F
+#define IXGB_SUBDEVICE_ID_A01F 0xA01F
+
+#define IXGB_DEVICE_ID_82597EX_CX4 0x109E
+#define IXGB_SUBDEVICE_ID_A00C 0xA00C
+#define IXGB_SUBDEVICE_ID_A01C 0xA01C
+#define IXGB_SUBDEVICE_ID_7036 0x7036
+
+#endif /* #ifndef _IXGB_IDS_H_ */
+/* End of File */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/prefetch.h>
+#include "ixgb.h"
+
+char ixgb_driver_name[] = "ixgb";
+static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
+
+#define DRIVERNAPI "-NAPI"
+#define DRV_VERSION "1.0.135-k2" DRIVERNAPI
+const char ixgb_driver_version[] = DRV_VERSION;
+static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation.";
+
+#define IXGB_CB_LENGTH 256
+static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH;
+module_param(copybreak, uint, 0644);
+MODULE_PARM_DESC(copybreak,
+ "Maximum size of packet that is copied to a new buffer on receive");
+
+/* ixgb_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static DEFINE_PCI_DEVICE_TABLE(ixgb_pci_tbl) = {
+ {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_CX4,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_SR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_LR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+
+ /* required last entry */
+ {0,}
+};
+
+MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl);
+
+/* Local Function Prototypes */
+static int ixgb_init_module(void);
+static void ixgb_exit_module(void);
+static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
+static void __devexit ixgb_remove(struct pci_dev *pdev);
+static int ixgb_sw_init(struct ixgb_adapter *adapter);
+static int ixgb_open(struct net_device *netdev);
+static int ixgb_close(struct net_device *netdev);
+static void ixgb_configure_tx(struct ixgb_adapter *adapter);
+static void ixgb_configure_rx(struct ixgb_adapter *adapter);
+static void ixgb_setup_rctl(struct ixgb_adapter *adapter);
+static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter);
+static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter);
+static void ixgb_set_multi(struct net_device *netdev);
+static void ixgb_watchdog(unsigned long data);
+static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb,
+ struct net_device *netdev);
+static struct net_device_stats *ixgb_get_stats(struct net_device *netdev);
+static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
+static int ixgb_set_mac(struct net_device *netdev, void *p);
+static irqreturn_t ixgb_intr(int irq, void *data);
+static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
+
+static int ixgb_clean(struct napi_struct *, int);
+static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int);
+static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
+
+static void ixgb_tx_timeout(struct net_device *dev);
+static void ixgb_tx_timeout_task(struct work_struct *work);
+
+static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter);
+static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter);
+static void ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
+static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
+static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/* for netdump / net console */
+static void ixgb_netpoll(struct net_device *dev);
+#endif
+
+static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
+ enum pci_channel_state state);
+static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
+static void ixgb_io_resume (struct pci_dev *pdev);
+
+static struct pci_error_handlers ixgb_err_handler = {
+ .error_detected = ixgb_io_error_detected,
+ .slot_reset = ixgb_io_slot_reset,
+ .resume = ixgb_io_resume,
+};
+
+static struct pci_driver ixgb_driver = {
+ .name = ixgb_driver_name,
+ .id_table = ixgb_pci_tbl,
+ .probe = ixgb_probe,
+ .remove = __devexit_p(ixgb_remove),
+ .err_handler = &ixgb_err_handler
+};
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+static int debug = DEFAULT_DEBUG_LEVEL_SHIFT;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
+
+/**
+ * ixgb_init_module - Driver Registration Routine
+ *
+ * ixgb_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+
+static int __init
+ixgb_init_module(void)
+{
+ pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version);
+ pr_info("%s\n", ixgb_copyright);
+
+ return pci_register_driver(&ixgb_driver);
+}
+
+module_init(ixgb_init_module);
+
+/**
+ * ixgb_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgb_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+
+static void __exit
+ixgb_exit_module(void)
+{
+ pci_unregister_driver(&ixgb_driver);
+}
+
+module_exit(ixgb_exit_module);
+
+/**
+ * ixgb_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_irq_disable(struct ixgb_adapter *adapter)
+{
+ IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
+ IXGB_WRITE_FLUSH(&adapter->hw);
+ synchronize_irq(adapter->pdev->irq);
+}
+
+/**
+ * ixgb_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_irq_enable(struct ixgb_adapter *adapter)
+{
+ u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
+ IXGB_INT_TXDW | IXGB_INT_LSC;
+ if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
+ val |= IXGB_INT_GPI0;
+ IXGB_WRITE_REG(&adapter->hw, IMS, val);
+ IXGB_WRITE_FLUSH(&adapter->hw);
+}
+
+int
+ixgb_up(struct ixgb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err, irq_flags = IRQF_SHARED;
+ int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ struct ixgb_hw *hw = &adapter->hw;
+
+ /* hardware has been reset, we need to reload some things */
+
+ ixgb_rar_set(hw, netdev->dev_addr, 0);
+ ixgb_set_multi(netdev);
+
+ ixgb_restore_vlan(adapter);
+
+ ixgb_configure_tx(adapter);
+ ixgb_setup_rctl(adapter);
+ ixgb_configure_rx(adapter);
+ ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring));
+
+ /* disable interrupts and get the hardware into a known state */
+ IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
+
+ /* only enable MSI if bus is in PCI-X mode */
+ if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) {
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->have_msi = 1;
+ irq_flags = 0;
+ }
+ /* proceed to try to request regular interrupt */
+ }
+
+ err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags,
+ netdev->name, netdev);
+ if (err) {
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate interrupt Error: %d\n", err);
+ return err;
+ }
+
+ if ((hw->max_frame_size != max_frame) ||
+ (hw->max_frame_size !=
+ (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) {
+
+ hw->max_frame_size = max_frame;
+
+ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
+
+ if (hw->max_frame_size >
+ IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
+
+ if (!(ctrl0 & IXGB_CTRL0_JFE)) {
+ ctrl0 |= IXGB_CTRL0_JFE;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0);
+ }
+ }
+ }
+
+ clear_bit(__IXGB_DOWN, &adapter->flags);
+
+ napi_enable(&adapter->napi);
+ ixgb_irq_enable(adapter);
+
+ netif_wake_queue(netdev);
+
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+ return 0;
+}
+
+void
+ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ /* prevent the interrupt handler from restarting watchdog */
+ set_bit(__IXGB_DOWN, &adapter->flags);
+
+ napi_disable(&adapter->napi);
+ /* waiting for NAPI to complete can re-enable interrupts */
+ ixgb_irq_disable(adapter);
+ free_irq(adapter->pdev->irq, netdev);
+
+ if (adapter->have_msi)
+ pci_disable_msi(adapter->pdev);
+
+ if (kill_watchdog)
+ del_timer_sync(&adapter->watchdog_timer);
+
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+
+ ixgb_reset(adapter);
+ ixgb_clean_tx_ring(adapter);
+ ixgb_clean_rx_ring(adapter);
+}
+
+void
+ixgb_reset(struct ixgb_adapter *adapter)
+{
+ struct ixgb_hw *hw = &adapter->hw;
+
+ ixgb_adapter_stop(hw);
+ if (!ixgb_init_hw(hw))
+ netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
+
+ /* restore frame size information */
+ IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
+ if (hw->max_frame_size >
+ IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
+ u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
+ if (!(ctrl0 & IXGB_CTRL0_JFE)) {
+ ctrl0 |= IXGB_CTRL0_JFE;
+ IXGB_WRITE_REG(hw, CTRL0, ctrl0);
+ }
+ }
+}
+
+static const struct net_device_ops ixgb_netdev_ops = {
+ .ndo_open = ixgb_open,
+ .ndo_stop = ixgb_close,
+ .ndo_start_xmit = ixgb_xmit_frame,
+ .ndo_get_stats = ixgb_get_stats,
+ .ndo_set_multicast_list = ixgb_set_multi,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ixgb_set_mac,
+ .ndo_change_mtu = ixgb_change_mtu,
+ .ndo_tx_timeout = ixgb_tx_timeout,
+ .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ixgb_netpoll,
+#endif
+};
+
+/**
+ * ixgb_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgb_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgb_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+
+static int __devinit
+ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ struct net_device *netdev = NULL;
+ struct ixgb_adapter *adapter;
+ static int cards_found = 0;
+ int pci_using_dac;
+ int i;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_using_dac = 0;
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err) {
+ err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
+ if (!err)
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (err) {
+ pr_err("No usable DMA configuration, aborting\n");
+ goto err_dma_mask;
+ }
+ }
+ }
+
+ err = pci_request_regions(pdev, ixgb_driver_name);
+ if (err)
+ goto err_request_regions;
+
+ pci_set_master(pdev);
+
+ netdev = alloc_etherdev(sizeof(struct ixgb_adapter));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ adapter->hw.back = adapter;
+ adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
+
+ adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0);
+ if (!adapter->hw.hw_addr) {
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ for (i = BAR_1; i <= BAR_5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
+ adapter->hw.io_base = pci_resource_start(pdev, i);
+ break;
+ }
+ }
+
+ netdev->netdev_ops = &ixgb_netdev_ops;
+ ixgb_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64);
+
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+
+ /* setup the private structure */
+
+ err = ixgb_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_HW_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+ netdev->features |= NETIF_F_TSO;
+
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ /* make sure the EEPROM is good */
+
+ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "The EEPROM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = ixgb_watchdog;
+ adapter->watchdog_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
+
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+ netif_info(adapter, probe, adapter->netdev,
+ "Intel(R) PRO/10GbE Network Connection\n");
+ ixgb_check_options(adapter);
+ /* reset the hardware with the new settings */
+
+ ixgb_reset(adapter);
+
+ cards_found++;
+ return 0;
+
+err_register:
+err_sw_init:
+err_eeprom:
+ iounmap(adapter->hw.hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_request_regions:
+err_dma_mask:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * ixgb_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgb_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+
+static void __devexit
+ixgb_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ cancel_work_sync(&adapter->tx_timeout_task);
+
+ unregister_netdev(netdev);
+
+ iounmap(adapter->hw.hw_addr);
+ pci_release_regions(pdev);
+
+ free_netdev(netdev);
+ pci_disable_device(pdev);
+}
+
+/**
+ * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgb_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+
+static int __devinit
+ixgb_sw_init(struct ixgb_adapter *adapter)
+{
+ struct ixgb_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_id = pdev->subsystem_device;
+
+ hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
+
+ if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
+ (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
+ hw->mac_type = ixgb_82597;
+ else {
+ /* should never have loaded on this device */
+ netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
+ }
+
+ /* enable flow control to be programmed */
+ hw->fc.send_xon = 1;
+
+ set_bit(__IXGB_DOWN, &adapter->flags);
+ return 0;
+}
+
+/**
+ * ixgb_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+
+static int
+ixgb_open(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* allocate transmit descriptors */
+ err = ixgb_setup_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ netif_carrier_off(netdev);
+
+ /* allocate receive descriptors */
+
+ err = ixgb_setup_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ err = ixgb_up(adapter);
+ if (err)
+ goto err_up;
+
+ netif_start_queue(netdev);
+
+ return 0;
+
+err_up:
+ ixgb_free_rx_resources(adapter);
+err_setup_rx:
+ ixgb_free_tx_resources(adapter);
+err_setup_tx:
+ ixgb_reset(adapter);
+
+ return err;
+}
+
+/**
+ * ixgb_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+
+static int
+ixgb_close(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ ixgb_down(adapter, true);
+
+ ixgb_free_tx_resources(adapter);
+ ixgb_free_rx_resources(adapter);
+
+ return 0;
+}
+
+/**
+ * ixgb_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Return 0 on success, negative on failure
+ **/
+
+int
+ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgb_buffer) * txdr->count;
+ txdr->buffer_info = vzalloc(size);
+ if (!txdr->buffer_info) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate transmit descriptor ring memory\n");
+ return -ENOMEM;
+ }
+
+ /* round up to nearest 4K */
+
+ txdr->size = txdr->count * sizeof(struct ixgb_tx_desc);
+ txdr->size = ALIGN(txdr->size, 4096);
+
+ txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
+ GFP_KERNEL);
+ if (!txdr->desc) {
+ vfree(txdr->buffer_info);
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate transmit descriptor memory\n");
+ return -ENOMEM;
+ }
+ memset(txdr->desc, 0, txdr->size);
+
+ txdr->next_to_use = 0;
+ txdr->next_to_clean = 0;
+
+ return 0;
+}
+
+/**
+ * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset.
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+
+static void
+ixgb_configure_tx(struct ixgb_adapter *adapter)
+{
+ u64 tdba = adapter->tx_ring.dma;
+ u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
+ u32 tctl;
+ struct ixgb_hw *hw = &adapter->hw;
+
+ /* Setup the Base and Length of the Tx Descriptor Ring
+ * tx_ring.dma can be either a 32 or 64 bit value
+ */
+
+ IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
+ IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32));
+
+ IXGB_WRITE_REG(hw, TDLEN, tdlen);
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+
+ IXGB_WRITE_REG(hw, TDH, 0);
+ IXGB_WRITE_REG(hw, TDT, 0);
+
+ /* don't set up txdctl, it induces performance problems if configured
+ * incorrectly */
+ /* Set the Tx Interrupt Delay register */
+
+ IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
+
+ /* Program the Transmit Control Register */
+
+ tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE;
+ IXGB_WRITE_REG(hw, TCTL, tctl);
+
+ /* Setup Transmit Descriptor Settings for this adapter */
+ adapter->tx_cmd_type =
+ IXGB_TX_DESC_TYPE |
+ (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0);
+}
+
+/**
+ * ixgb_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+int
+ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgb_buffer) * rxdr->count;
+ rxdr->buffer_info = vzalloc(size);
+ if (!rxdr->buffer_info) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate receive descriptor ring\n");
+ return -ENOMEM;
+ }
+
+ /* Round up to nearest 4K */
+
+ rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc);
+ rxdr->size = ALIGN(rxdr->size, 4096);
+
+ rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
+ GFP_KERNEL);
+
+ if (!rxdr->desc) {
+ vfree(rxdr->buffer_info);
+ netif_err(adapter, probe, adapter->netdev,
+ "Unable to allocate receive descriptors\n");
+ return -ENOMEM;
+ }
+ memset(rxdr->desc, 0, rxdr->size);
+
+ rxdr->next_to_clean = 0;
+ rxdr->next_to_use = 0;
+
+ return 0;
+}
+
+/**
+ * ixgb_setup_rctl - configure the receive control register
+ * @adapter: Board private structure
+ **/
+
+static void
+ixgb_setup_rctl(struct ixgb_adapter *adapter)
+{
+ u32 rctl;
+
+ rctl = IXGB_READ_REG(&adapter->hw, RCTL);
+
+ rctl &= ~(3 << IXGB_RCTL_MO_SHIFT);
+
+ rctl |=
+ IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 |
+ IXGB_RCTL_RXEN | IXGB_RCTL_CFF |
+ (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT);
+
+ rctl |= IXGB_RCTL_SECRC;
+
+ if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048)
+ rctl |= IXGB_RCTL_BSIZE_2048;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096)
+ rctl |= IXGB_RCTL_BSIZE_4096;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192)
+ rctl |= IXGB_RCTL_BSIZE_8192;
+ else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384)
+ rctl |= IXGB_RCTL_BSIZE_16384;
+
+ IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
+}
+
+/**
+ * ixgb_configure_rx - Configure 82597 Receive Unit after Reset.
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+
+static void
+ixgb_configure_rx(struct ixgb_adapter *adapter)
+{
+ u64 rdba = adapter->rx_ring.dma;
+ u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 rctl;
+ u32 rxcsum;
+
+ /* make sure receives are disabled while setting up the descriptors */
+
+ rctl = IXGB_READ_REG(hw, RCTL);
+ IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN);
+
+ /* set the Receive Delay Timer Register */
+
+ IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
+
+ /* Setup the Base and Length of the Rx Descriptor Ring */
+
+ IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
+ IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32));
+
+ IXGB_WRITE_REG(hw, RDLEN, rdlen);
+
+ /* Setup the HW Rx Head and Tail Descriptor Pointers */
+ IXGB_WRITE_REG(hw, RDH, 0);
+ IXGB_WRITE_REG(hw, RDT, 0);
+
+ /* due to the hardware errata with RXDCTL, we are unable to use any of
+ * the performance enhancing features of it without causing other
+ * subtle bugs, some of the bugs could include receive length
+ * corruption at high data rates (WTHRESH > 0) and/or receive
+ * descriptor ring irregularites (particularly in hardware cache) */
+ IXGB_WRITE_REG(hw, RXDCTL, 0);
+
+ /* Enable Receive Checksum Offload for TCP and UDP */
+ if (adapter->rx_csum) {
+ rxcsum = IXGB_READ_REG(hw, RXCSUM);
+ rxcsum |= IXGB_RXCSUM_TUOFL;
+ IXGB_WRITE_REG(hw, RXCSUM, rxcsum);
+ }
+
+ /* Enable Receives */
+
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+}
+
+/**
+ * ixgb_free_tx_resources - Free Tx Resources
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+
+void
+ixgb_free_tx_resources(struct ixgb_adapter *adapter)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgb_clean_tx_ring(adapter);
+
+ vfree(adapter->tx_ring.buffer_info);
+ adapter->tx_ring.buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, adapter->tx_ring.size,
+ adapter->tx_ring.desc, adapter->tx_ring.dma);
+
+ adapter->tx_ring.desc = NULL;
+}
+
+static void
+ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter,
+ struct ixgb_buffer *buffer_info)
+{
+ if (buffer_info->dma) {
+ if (buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
+ buffer_info->length, DMA_TO_DEVICE);
+ buffer_info->dma = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb_any(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ buffer_info->time_stamp = 0;
+ /* these fields must always be initialized in tx
+ * buffer_info->length = 0;
+ * buffer_info->next_to_watch = 0; */
+}
+
+/**
+ * ixgb_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_clean_tx_ring(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct ixgb_buffer *buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ buffer_info = &tx_ring->buffer_info[i];
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ size = sizeof(struct ixgb_buffer) * tx_ring->count;
+ memset(tx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ IXGB_WRITE_REG(&adapter->hw, TDH, 0);
+ IXGB_WRITE_REG(&adapter->hw, TDT, 0);
+}
+
+/**
+ * ixgb_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+
+void
+ixgb_free_rx_resources(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgb_clean_rx_ring(adapter);
+
+ vfree(rx_ring->buffer_info);
+ rx_ring->buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * ixgb_clean_rx_ring - Free Rx Buffers
+ * @adapter: board private structure
+ **/
+
+static void
+ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct ixgb_buffer *buffer_info;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ /* Free all the Rx ring sk_buffs */
+
+ for (i = 0; i < rx_ring->count; i++) {
+ buffer_info = &rx_ring->buffer_info[i];
+ if (buffer_info->dma) {
+ dma_unmap_single(&pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+ buffer_info->length = 0;
+ }
+
+ if (buffer_info->skb) {
+ dev_kfree_skb(buffer_info->skb);
+ buffer_info->skb = NULL;
+ }
+ }
+
+ size = sizeof(struct ixgb_buffer) * rx_ring->count;
+ memset(rx_ring->buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ IXGB_WRITE_REG(&adapter->hw, RDH, 0);
+ IXGB_WRITE_REG(&adapter->hw, RDT, 0);
+}
+
+/**
+ * ixgb_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+ixgb_set_mac(struct net_device *netdev, void *p)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+
+ ixgb_rar_set(&adapter->hw, addr->sa_data, 0);
+
+ return 0;
+}
+
+/**
+ * ixgb_set_multi - Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_multi entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast,
+ * promiscuous mode, and all-multi behavior.
+ **/
+
+static void
+ixgb_set_multi(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ struct netdev_hw_addr *ha;
+ u32 rctl;
+ int i;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ rctl = IXGB_READ_REG(hw, RCTL);
+
+ if (netdev->flags & IFF_PROMISC) {
+ rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE);
+ /* disable VLAN filtering */
+ rctl &= ~IXGB_RCTL_CFIEN;
+ rctl &= ~IXGB_RCTL_VFE;
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ rctl |= IXGB_RCTL_MPE;
+ rctl &= ~IXGB_RCTL_UPE;
+ } else {
+ rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE);
+ }
+ /* enable VLAN filtering */
+ rctl |= IXGB_RCTL_VFE;
+ rctl &= ~IXGB_RCTL_CFIEN;
+ }
+
+ if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
+ rctl |= IXGB_RCTL_MPE;
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+ } else {
+ u8 mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
+ IXGB_ETH_LENGTH_OF_ADDRESS];
+
+ IXGB_WRITE_REG(hw, RCTL, rctl);
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev)
+ memcpy(&mta[i++ * IXGB_ETH_LENGTH_OF_ADDRESS],
+ ha->addr, IXGB_ETH_LENGTH_OF_ADDRESS);
+
+ ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
+ }
+
+ if (netdev->features & NETIF_F_HW_VLAN_RX)
+ ixgb_vlan_strip_enable(adapter);
+ else
+ ixgb_vlan_strip_disable(adapter);
+
+}
+
+/**
+ * ixgb_watchdog - Timer Call-back
+ * @data: pointer to netdev cast into an unsigned long
+ **/
+
+static void
+ixgb_watchdog(unsigned long data)
+{
+ struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
+ struct net_device *netdev = adapter->netdev;
+ struct ixgb_desc_ring *txdr = &adapter->tx_ring;
+
+ ixgb_check_for_link(&adapter->hw);
+
+ if (ixgb_check_for_bad_link(&adapter->hw)) {
+ /* force the reset path */
+ netif_stop_queue(netdev);
+ }
+
+ if (adapter->hw.link_up) {
+ if (!netif_carrier_ok(netdev)) {
+ netdev_info(netdev,
+ "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n",
+ (adapter->hw.fc.type == ixgb_fc_full) ?
+ "RX/TX" :
+ (adapter->hw.fc.type == ixgb_fc_rx_pause) ?
+ "RX" :
+ (adapter->hw.fc.type == ixgb_fc_tx_pause) ?
+ "TX" : "None");
+ adapter->link_speed = 10000;
+ adapter->link_duplex = FULL_DUPLEX;
+ netif_carrier_on(netdev);
+ }
+ } else {
+ if (netif_carrier_ok(netdev)) {
+ adapter->link_speed = 0;
+ adapter->link_duplex = 0;
+ netdev_info(netdev, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+ }
+ }
+
+ ixgb_update_stats(adapter);
+
+ if (!netif_carrier_ok(netdev)) {
+ if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context). */
+ schedule_work(&adapter->tx_timeout_task);
+ /* return immediately since reset is imminent */
+ return;
+ }
+ }
+
+ /* Force detection of hung controller every watchdog period */
+ adapter->detect_tx_hung = true;
+
+ /* generate an interrupt to force clean up of any stragglers */
+ IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW);
+
+ /* Reset the timer */
+ mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
+}
+
+#define IXGB_TX_FLAGS_CSUM 0x00000001
+#define IXGB_TX_FLAGS_VLAN 0x00000002
+#define IXGB_TX_FLAGS_TSO 0x00000004
+
+static int
+ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
+{
+ struct ixgb_context_desc *context_desc;
+ unsigned int i;
+ u8 ipcss, ipcso, tucss, tucso, hdr_len;
+ u16 ipcse, tucse, mss;
+ int err;
+
+ if (likely(skb_is_gso(skb))) {
+ struct ixgb_buffer *buffer_info;
+ struct iphdr *iph;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
+ mss = skb_shinfo(skb)->gso_size;
+ iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP, 0);
+ ipcss = skb_network_offset(skb);
+ ipcso = (void *)&(iph->check) - (void *)skb->data;
+ ipcse = skb_transport_offset(skb) - 1;
+ tucss = skb_transport_offset(skb);
+ tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
+ tucse = 0;
+
+ i = adapter->tx_ring.next_to_use;
+ context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+ buffer_info = &adapter->tx_ring.buffer_info[i];
+ WARN_ON(buffer_info->dma != 0);
+
+ context_desc->ipcss = ipcss;
+ context_desc->ipcso = ipcso;
+ context_desc->ipcse = cpu_to_le16(ipcse);
+ context_desc->tucss = tucss;
+ context_desc->tucso = tucso;
+ context_desc->tucse = cpu_to_le16(tucse);
+ context_desc->mss = cpu_to_le16(mss);
+ context_desc->hdr_len = hdr_len;
+ context_desc->status = 0;
+ context_desc->cmd_type_len = cpu_to_le32(
+ IXGB_CONTEXT_DESC_TYPE
+ | IXGB_CONTEXT_DESC_CMD_TSE
+ | IXGB_CONTEXT_DESC_CMD_IP
+ | IXGB_CONTEXT_DESC_CMD_TCP
+ | IXGB_CONTEXT_DESC_CMD_IDE
+ | (skb->len - (hdr_len)));
+
+
+ if (++i == adapter->tx_ring.count) i = 0;
+ adapter->tx_ring.next_to_use = i;
+
+ return 1;
+ }
+
+ return 0;
+}
+
+static bool
+ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
+{
+ struct ixgb_context_desc *context_desc;
+ unsigned int i;
+ u8 css, cso;
+
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
+ struct ixgb_buffer *buffer_info;
+ css = skb_checksum_start_offset(skb);
+ cso = css + skb->csum_offset;
+
+ i = adapter->tx_ring.next_to_use;
+ context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
+ buffer_info = &adapter->tx_ring.buffer_info[i];
+ WARN_ON(buffer_info->dma != 0);
+
+ context_desc->tucss = css;
+ context_desc->tucso = cso;
+ context_desc->tucse = 0;
+ /* zero out any previously existing data in one instruction */
+ *(u32 *)&(context_desc->ipcss) = 0;
+ context_desc->status = 0;
+ context_desc->hdr_len = 0;
+ context_desc->mss = 0;
+ context_desc->cmd_type_len =
+ cpu_to_le32(IXGB_CONTEXT_DESC_TYPE
+ | IXGB_TX_DESC_CMD_IDE);
+
+ if (++i == adapter->tx_ring.count) i = 0;
+ adapter->tx_ring.next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+#define IXGB_MAX_TXD_PWR 14
+#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR)
+
+static int
+ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
+ unsigned int first)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_buffer *buffer_info;
+ int len = skb_headlen(skb);
+ unsigned int offset = 0, size, count = 0, i;
+ unsigned int mss = skb_shinfo(skb)->gso_size;
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ unsigned int f;
+
+ i = tx_ring->next_to_use;
+
+ while (len) {
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && !nr_frags && size == len && size > 8))
+ size -= 4;
+
+ buffer_info->length = size;
+ WARN_ON(buffer_info->dma != 0);
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = false;
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = 0;
+
+ len -= size;
+ offset += size;
+ count++;
+ if (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = frag->size;
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ buffer_info = &tx_ring->buffer_info[i];
+ size = min(len, IXGB_MAX_DATA_PER_TXD);
+
+ /* Workaround for premature desc write-backs
+ * in TSO mode. Append 4-byte sentinel desc */
+ if (unlikely(mss && (f == (nr_frags - 1))
+ && size == len && size > 8))
+ size -= 4;
+
+ buffer_info->length = size;
+ buffer_info->time_stamp = jiffies;
+ buffer_info->mapped_as_page = true;
+ buffer_info->dma =
+ dma_map_page(&pdev->dev, frag->page,
+ offset, size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, buffer_info->dma))
+ goto dma_error;
+ buffer_info->next_to_watch = 0;
+
+ len -= size;
+ offset += size;
+ count++;
+ }
+ }
+ tx_ring->buffer_info[i].skb = skb;
+ tx_ring->buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+ buffer_info->dma = 0;
+ if (count)
+ count--;
+
+ while (count--) {
+ if (i==0)
+ i += tx_ring->count;
+ i--;
+ buffer_info = &tx_ring->buffer_info[i];
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+ }
+
+ return 0;
+}
+
+static void
+ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct ixgb_tx_desc *tx_desc = NULL;
+ struct ixgb_buffer *buffer_info;
+ u32 cmd_type_len = adapter->tx_cmd_type;
+ u8 status = 0;
+ u8 popts = 0;
+ unsigned int i;
+
+ if (tx_flags & IXGB_TX_FLAGS_TSO) {
+ cmd_type_len |= IXGB_TX_DESC_CMD_TSE;
+ popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM);
+ }
+
+ if (tx_flags & IXGB_TX_FLAGS_CSUM)
+ popts |= IXGB_TX_DESC_POPTS_TXSM;
+
+ if (tx_flags & IXGB_TX_FLAGS_VLAN)
+ cmd_type_len |= IXGB_TX_DESC_CMD_VLE;
+
+ i = tx_ring->next_to_use;
+
+ while (count--) {
+ buffer_info = &tx_ring->buffer_info[i];
+ tx_desc = IXGB_TX_DESC(*tx_ring, i);
+ tx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
+ tx_desc->cmd_type_len =
+ cpu_to_le32(cmd_type_len | buffer_info->length);
+ tx_desc->status = status;
+ tx_desc->popts = popts;
+ tx_desc->vlan = cpu_to_le16(vlan_id);
+
+ if (++i == tx_ring->count) i = 0;
+ }
+
+ tx_desc->cmd_type_len |=
+ cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64). */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ IXGB_WRITE_REG(&adapter->hw, TDT, i);
+}
+
+static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+
+ netif_stop_queue(netdev);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(IXGB_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! */
+ netif_start_queue(netdev);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int ixgb_maybe_stop_tx(struct net_device *netdev,
+ struct ixgb_desc_ring *tx_ring, int size)
+{
+ if (likely(IXGB_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __ixgb_maybe_stop_tx(netdev, size);
+}
+
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \
+ (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
+#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \
+ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
+ + 1 /* one more needed for sentinel TSO workaround */
+
+static netdev_tx_t
+ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ unsigned int first;
+ unsigned int tx_flags = 0;
+ int vlan_id = 0;
+ int count = 0;
+ int tso;
+
+ if (test_bit(__IXGB_DOWN, &adapter->flags)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (skb->len <= 0) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
+ DESC_NEEDED)))
+ return NETDEV_TX_BUSY;
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= IXGB_TX_FLAGS_VLAN;
+ vlan_id = vlan_tx_tag_get(skb);
+ }
+
+ first = adapter->tx_ring.next_to_use;
+
+ tso = ixgb_tso(adapter, skb);
+ if (tso < 0) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (likely(tso))
+ tx_flags |= IXGB_TX_FLAGS_TSO;
+ else if (ixgb_tx_csum(adapter, skb))
+ tx_flags |= IXGB_TX_FLAGS_CSUM;
+
+ count = ixgb_tx_map(adapter, skb, first);
+
+ if (count) {
+ ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
+ /* Make sure there is space in the ring for the next send. */
+ ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
+
+ } else {
+ dev_kfree_skb_any(skb);
+ adapter->tx_ring.buffer_info[first].time_stamp = 0;
+ adapter->tx_ring.next_to_use = first;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * ixgb_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+
+static void
+ixgb_tx_timeout(struct net_device *netdev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->tx_timeout_task);
+}
+
+static void
+ixgb_tx_timeout_task(struct work_struct *work)
+{
+ struct ixgb_adapter *adapter =
+ container_of(work, struct ixgb_adapter, tx_timeout_task);
+
+ adapter->tx_timeout_count++;
+ ixgb_down(adapter, true);
+ ixgb_up(adapter);
+}
+
+/**
+ * ixgb_get_stats - Get System Network Statistics
+ * @netdev: network interface device structure
+ *
+ * Returns the address of the device statistics structure.
+ * The statistics are actually updated from the timer callback.
+ **/
+
+static struct net_device_stats *
+ixgb_get_stats(struct net_device *netdev)
+{
+ return &netdev->stats;
+}
+
+/**
+ * ixgb_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+
+static int
+ixgb_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+ int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
+
+ /* MTU < 68 is an error for IPv4 traffic, just don't allow it */
+ if ((new_mtu < 68) ||
+ (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Invalid MTU setting %d\n", new_mtu);
+ return -EINVAL;
+ }
+
+ if (old_max_frame == max_frame)
+ return 0;
+
+ if (netif_running(netdev))
+ ixgb_down(adapter, true);
+
+ adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */
+
+ netdev->mtu = new_mtu;
+
+ if (netif_running(netdev))
+ ixgb_up(adapter);
+
+ return 0;
+}
+
+/**
+ * ixgb_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+
+void
+ixgb_update_stats(struct ixgb_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+
+ /* Prevent stats update while adapter is being reset */
+ if (pci_channel_offline(pdev))
+ return;
+
+ if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
+ (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
+ u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
+ u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
+ u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
+ u64 bcast = ((u64)bcast_h << 32) | bcast_l;
+
+ multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
+ /* fix up multicast stats by removing broadcasts */
+ if (multi >= bcast)
+ multi -= bcast;
+
+ adapter->stats.mprcl += (multi & 0xFFFFFFFF);
+ adapter->stats.mprch += (multi >> 32);
+ adapter->stats.bprcl += bcast_l;
+ adapter->stats.bprch += bcast_h;
+ } else {
+ adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
+ adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
+ adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
+ adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
+ }
+ adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL);
+ adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH);
+ adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL);
+ adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH);
+ adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL);
+ adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH);
+ adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL);
+ adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH);
+ adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL);
+ adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH);
+ adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL);
+ adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH);
+ adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL);
+ adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH);
+ adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC);
+ adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC);
+ adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC);
+ adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC);
+ adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS);
+ adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC);
+ adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC);
+ adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC);
+ adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL);
+ adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH);
+ adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL);
+ adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH);
+ adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL);
+ adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH);
+ adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL);
+ adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH);
+ adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL);
+ adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH);
+ adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL);
+ adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH);
+ adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL);
+ adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH);
+ adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL);
+ adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH);
+ adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL);
+ adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH);
+ adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC);
+ adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C);
+ adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC);
+ adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC);
+ adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC);
+ adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC);
+ adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC);
+ adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC);
+ adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC);
+ adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC);
+ adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC);
+ adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC);
+ adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC);
+ adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC);
+ adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC);
+ adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC);
+
+ /* Fill out the OS statistics structure */
+
+ netdev->stats.rx_packets = adapter->stats.gprcl;
+ netdev->stats.tx_packets = adapter->stats.gptcl;
+ netdev->stats.rx_bytes = adapter->stats.gorcl;
+ netdev->stats.tx_bytes = adapter->stats.gotcl;
+ netdev->stats.multicast = adapter->stats.mprcl;
+ netdev->stats.collisions = 0;
+
+ /* ignore RLEC as it reports errors for padded (<64bytes) frames
+ * with a length in the type/len field */
+ netdev->stats.rx_errors =
+ /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
+ adapter->stats.ruc +
+ adapter->stats.roc /*+ adapter->stats.rlec */ +
+ adapter->stats.icbc +
+ adapter->stats.ecbc + adapter->stats.mpc;
+
+ /* see above
+ * netdev->stats.rx_length_errors = adapter->stats.rlec;
+ */
+
+ netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+ netdev->stats.rx_fifo_errors = adapter->stats.mpc;
+ netdev->stats.rx_missed_errors = adapter->stats.mpc;
+ netdev->stats.rx_over_errors = adapter->stats.mpc;
+
+ netdev->stats.tx_errors = 0;
+ netdev->stats.rx_frame_errors = 0;
+ netdev->stats.tx_aborted_errors = 0;
+ netdev->stats.tx_carrier_errors = 0;
+ netdev->stats.tx_fifo_errors = 0;
+ netdev->stats.tx_heartbeat_errors = 0;
+ netdev->stats.tx_window_errors = 0;
+}
+
+#define IXGB_MAX_INTR 10
+/**
+ * ixgb_intr - Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+
+static irqreturn_t
+ixgb_intr(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ struct ixgb_hw *hw = &adapter->hw;
+ u32 icr = IXGB_READ_REG(hw, ICR);
+
+ if (unlikely(!icr))
+ return IRQ_NONE; /* Not our interrupt */
+
+ if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)))
+ if (!test_bit(__IXGB_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
+ if (napi_schedule_prep(&adapter->napi)) {
+
+ /* Disable interrupts and register for poll. The flush
+ of the posted write is intentionally left out.
+ */
+
+ IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
+ __napi_schedule(&adapter->napi);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * ixgb_clean - NAPI Rx polling callback
+ * @adapter: board private structure
+ **/
+
+static int
+ixgb_clean(struct napi_struct *napi, int budget)
+{
+ struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi);
+ int work_done = 0;
+
+ ixgb_clean_tx_irq(adapter);
+ ixgb_clean_rx_irq(adapter, &work_done, budget);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (!test_bit(__IXGB_DOWN, &adapter->flags))
+ ixgb_irq_enable(adapter);
+ }
+
+ return work_done;
+}
+
+/**
+ * ixgb_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ **/
+
+static bool
+ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
+{
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct ixgb_tx_desc *tx_desc, *eop_desc;
+ struct ixgb_buffer *buffer_info;
+ unsigned int i, eop;
+ bool cleaned = false;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IXGB_TX_DESC(*tx_ring, eop);
+
+ while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
+
+ rmb(); /* read buffer_info after eop_desc */
+ for (cleaned = false; !cleaned; ) {
+ tx_desc = IXGB_TX_DESC(*tx_ring, i);
+ buffer_info = &tx_ring->buffer_info[i];
+
+ if (tx_desc->popts &
+ (IXGB_TX_DESC_POPTS_TXSM |
+ IXGB_TX_DESC_POPTS_IXSM))
+ adapter->hw_csum_tx_good++;
+
+ ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
+
+ *(u32 *)&(tx_desc->status) = 0;
+
+ cleaned = (i == eop);
+ if (++i == tx_ring->count) i = 0;
+ }
+
+ eop = tx_ring->buffer_info[i].next_to_watch;
+ eop_desc = IXGB_TX_DESC(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+ if (unlikely(cleaned && netif_carrier_ok(netdev) &&
+ IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean. */
+ smp_mb();
+
+ if (netif_queue_stopped(netdev) &&
+ !(test_bit(__IXGB_DOWN, &adapter->flags))) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+ }
+
+ if (adapter->detect_tx_hung) {
+ /* detect a transmit hang in hardware, this serializes the
+ * check with the clearing of time_stamp and movement of i */
+ adapter->detect_tx_hung = false;
+ if (tx_ring->buffer_info[eop].time_stamp &&
+ time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
+ && !(IXGB_READ_REG(&adapter->hw, STATUS) &
+ IXGB_STATUS_TXOFF)) {
+ /* detected Tx unit hang */
+ netif_err(adapter, drv, adapter->netdev,
+ "Detected Tx Unit Hang\n"
+ " TDH <%x>\n"
+ " TDT <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " next_to_watch <%x>\n"
+ " jiffies <%lx>\n"
+ " next_to_watch.status <%x>\n",
+ IXGB_READ_REG(&adapter->hw, TDH),
+ IXGB_READ_REG(&adapter->hw, TDT),
+ tx_ring->next_to_use,
+ tx_ring->next_to_clean,
+ tx_ring->buffer_info[eop].time_stamp,
+ eop,
+ jiffies,
+ eop_desc->status);
+ netif_stop_queue(netdev);
+ }
+ }
+
+ return cleaned;
+}
+
+/**
+ * ixgb_rx_checksum - Receive Checksum Offload for 82597.
+ * @adapter: board private structure
+ * @rx_desc: receive descriptor
+ * @sk_buff: socket buffer with received data
+ **/
+
+static void
+ixgb_rx_checksum(struct ixgb_adapter *adapter,
+ struct ixgb_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ /* Ignore Checksum bit is set OR
+ * TCP Checksum has not been calculated
+ */
+ if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) ||
+ (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) {
+ skb_checksum_none_assert(skb);
+ return;
+ }
+
+ /* At this point we know the hardware did the TCP checksum */
+ /* now look at the TCP checksum error bit */
+ if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) {
+ /* let the stack verify checksum errors */
+ skb_checksum_none_assert(skb);
+ adapter->hw_csum_rx_error++;
+ } else {
+ /* TCP checksum is good */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ adapter->hw_csum_rx_good++;
+ }
+}
+
+/*
+ * this should improve performance for small packets with large amounts
+ * of reassembly being done in the stack
+ */
+static void ixgb_check_copybreak(struct net_device *netdev,
+ struct ixgb_buffer *buffer_info,
+ u32 length, struct sk_buff **skb)
+{
+ struct sk_buff *new_skb;
+
+ if (length > copybreak)
+ return;
+
+ new_skb = netdev_alloc_skb_ip_align(netdev, length);
+ if (!new_skb)
+ return;
+
+ skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
+ (*skb)->data - NET_IP_ALIGN,
+ length + NET_IP_ALIGN);
+ /* save the skb in buffer_info as good */
+ buffer_info->skb = *skb;
+ *skb = new_skb;
+}
+
+/**
+ * ixgb_clean_rx_irq - Send received data up the network stack,
+ * @adapter: board private structure
+ **/
+
+static bool
+ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_rx_desc *rx_desc, *next_rxd;
+ struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
+ u32 length;
+ unsigned int i, j;
+ int cleaned_count = 0;
+ bool cleaned = false;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IXGB_RX_DESC(*rx_ring, i);
+ buffer_info = &rx_ring->buffer_info[i];
+
+ while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) {
+ struct sk_buff *skb;
+ u8 status;
+
+ if (*work_done >= work_to_do)
+ break;
+
+ (*work_done)++;
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+ status = rx_desc->status;
+ skb = buffer_info->skb;
+ buffer_info->skb = NULL;
+
+ prefetch(skb->data - NET_IP_ALIGN);
+
+ if (++i == rx_ring->count)
+ i = 0;
+ next_rxd = IXGB_RX_DESC(*rx_ring, i);
+ prefetch(next_rxd);
+
+ j = i + 1;
+ if (j == rx_ring->count)
+ j = 0;
+ next2_buffer = &rx_ring->buffer_info[j];
+ prefetch(next2_buffer);
+
+ next_buffer = &rx_ring->buffer_info[i];
+
+ cleaned = true;
+ cleaned_count++;
+
+ dma_unmap_single(&pdev->dev,
+ buffer_info->dma,
+ buffer_info->length,
+ DMA_FROM_DEVICE);
+ buffer_info->dma = 0;
+
+ length = le16_to_cpu(rx_desc->length);
+ rx_desc->length = 0;
+
+ if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) {
+
+ /* All receives must fit into a single buffer */
+
+ IXGB_DBG("Receive packet consumed multiple buffers "
+ "length<%x>\n", length);
+
+ dev_kfree_skb_irq(skb);
+ goto rxdesc_done;
+ }
+
+ if (unlikely(rx_desc->errors &
+ (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE |
+ IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) {
+ dev_kfree_skb_irq(skb);
+ goto rxdesc_done;
+ }
+
+ ixgb_check_copybreak(netdev, buffer_info, length, &skb);
+
+ /* Good Receive */
+ skb_put(skb, length);
+
+ /* Receive Checksum Offload */
+ ixgb_rx_checksum(adapter, rx_desc, skb);
+
+ skb->protocol = eth_type_trans(skb, netdev);
+ if (status & IXGB_RX_DESC_STATUS_VP)
+ __vlan_hwaccel_put_tag(skb,
+ le16_to_cpu(rx_desc->special));
+
+ netif_receive_skb(skb);
+
+rxdesc_done:
+ /* clean up descriptor, might be written over by hw */
+ rx_desc->status = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) {
+ ixgb_alloc_rx_buffers(adapter, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ buffer_info = next_buffer;
+ }
+
+ rx_ring->next_to_clean = i;
+
+ cleaned_count = IXGB_DESC_UNUSED(rx_ring);
+ if (cleaned_count)
+ ixgb_alloc_rx_buffers(adapter, cleaned_count);
+
+ return cleaned;
+}
+
+/**
+ * ixgb_alloc_rx_buffers - Replace used receive buffers
+ * @adapter: address of board private structure
+ **/
+
+static void
+ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count)
+{
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+ struct net_device *netdev = adapter->netdev;
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgb_rx_desc *rx_desc;
+ struct ixgb_buffer *buffer_info;
+ struct sk_buff *skb;
+ unsigned int i;
+ long cleancount;
+
+ i = rx_ring->next_to_use;
+ buffer_info = &rx_ring->buffer_info[i];
+ cleancount = IXGB_DESC_UNUSED(rx_ring);
+
+
+ /* leave three descriptors unused */
+ while (--cleancount > 2 && cleaned_count--) {
+ /* recycle! its good for you */
+ skb = buffer_info->skb;
+ if (skb) {
+ skb_trim(skb, 0);
+ goto map_skb;
+ }
+
+ skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
+ if (unlikely(!skb)) {
+ /* Better luck next round */
+ adapter->alloc_rx_buff_failed++;
+ break;
+ }
+
+ buffer_info->skb = skb;
+ buffer_info->length = adapter->rx_buffer_len;
+map_skb:
+ buffer_info->dma = dma_map_single(&pdev->dev,
+ skb->data,
+ adapter->rx_buffer_len,
+ DMA_FROM_DEVICE);
+
+ rx_desc = IXGB_RX_DESC(*rx_ring, i);
+ rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
+ /* guarantee DD bit not set now before h/w gets descriptor
+ * this is the rest of the workaround for h/w double
+ * writeback. */
+ rx_desc->status = 0;
+
+
+ if (++i == rx_ring->count) i = 0;
+ buffer_info = &rx_ring->buffer_info[i];
+ }
+
+ if (likely(rx_ring->next_to_use != i)) {
+ rx_ring->next_to_use = i;
+ if (unlikely(i-- == 0))
+ i = (rx_ring->count - 1);
+
+ /* Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs, such
+ * as IA-64). */
+ wmb();
+ IXGB_WRITE_REG(&adapter->hw, RDT, i);
+ }
+}
+
+static void
+ixgb_vlan_strip_enable(struct ixgb_adapter *adapter)
+{
+ u32 ctrl;
+
+ /* enable VLAN tag insert/strip */
+ ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+ ctrl |= IXGB_CTRL0_VME;
+ IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
+}
+
+static void
+ixgb_vlan_strip_disable(struct ixgb_adapter *adapter)
+{
+ u32 ctrl;
+
+ /* disable VLAN tag insert/strip */
+ ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
+ ctrl &= ~IXGB_CTRL0_VME;
+ IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
+}
+
+static void
+ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 vfta, index;
+
+ /* add VID to filter table */
+
+ index = (vid >> 5) & 0x7F;
+ vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta |= (1 << (vid & 0x1F));
+ ixgb_write_vfta(&adapter->hw, index, vfta);
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void
+ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+ u32 vfta, index;
+
+ /* remove VID from filter table */
+
+ index = (vid >> 5) & 0x7F;
+ vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
+ vfta &= ~(1 << (vid & 0x1F));
+ ixgb_write_vfta(&adapter->hw, index, vfta);
+ clear_bit(vid, adapter->active_vlans);
+}
+
+static void
+ixgb_restore_vlan(struct ixgb_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ ixgb_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+
+static void ixgb_netpoll(struct net_device *dev)
+{
+ struct ixgb_adapter *adapter = netdev_priv(dev);
+
+ disable_irq(adapter->pdev->irq);
+ ixgb_intr(adapter->pdev->irq, dev);
+ enable_irq(adapter->pdev->irq);
+}
+#endif
+
+/**
+ * ixgb_io_error_detected() - called when PCI error is detected
+ * @pdev pointer to pci device with error
+ * @state pci channel state after error
+ *
+ * This callback is called by the PCI subsystem whenever
+ * a PCI bus error is detected.
+ */
+static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev,
+ enum pci_channel_state state)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ ixgb_down(adapter, true);
+
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgb_io_slot_reset - called after the pci bus has been reset.
+ * @pdev pointer to pci device with error
+ *
+ * This callback is called after the PCI bus has been reset.
+ * Basically, this tries to restart the card from scratch.
+ * This is a shortened version of the device probe/discovery code,
+ * it resembles the first-half of the ixgb_probe() routine.
+ */
+static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ if (pci_enable_device(pdev)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "Cannot re-enable PCI device after reset\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ /* Perform card reset only on one instance of the card */
+ if (0 != PCI_FUNC (pdev->devfn))
+ return PCI_ERS_RESULT_RECOVERED;
+
+ pci_set_master(pdev);
+
+ netif_carrier_off(netdev);
+ netif_stop_queue(netdev);
+ ixgb_reset(adapter);
+
+ /* Make sure the EEPROM is good */
+ if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "After reset, the EEPROM checksum is not valid\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
+ memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->perm_addr)) {
+ netif_err(adapter, probe, adapter->netdev,
+ "After reset, invalid MAC address\n");
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * ixgb_io_resume - called when its OK to resume normal operations
+ * @pdev pointer to pci device with error
+ *
+ * The error recovery driver tells us that its OK to resume
+ * normal operation. Implementation resembles the second-half
+ * of the ixgb_probe() routine.
+ */
+static void ixgb_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgb_adapter *adapter = netdev_priv(netdev);
+
+ pci_set_master(pdev);
+
+ if (netif_running(netdev)) {
+ if (ixgb_up(adapter)) {
+ pr_err("can't bring device back up after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+}
+
+/* ixgb_main.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* glue for the OS independent part of ixgb
+ * includes register access macros
+ */
+
+#ifndef _IXGB_OSDEP_H_
+#define _IXGB_OSDEP_H_
+
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+
+#undef ASSERT
+#define ASSERT(x) BUG_ON(!(x))
+
+#define ENTER() pr_debug("%s\n", __func__);
+
+#define IXGB_WRITE_REG(a, reg, value) ( \
+ writel((value), ((a)->hw_addr + IXGB_##reg)))
+
+#define IXGB_READ_REG(a, reg) ( \
+ readl((a)->hw_addr + IXGB_##reg))
+
+#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2))))
+
+#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + IXGB_##reg + ((offset) << 2)))
+
+#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS)
+
+#define IXGB_MEMCPY memcpy
+
+#endif /* _IXGB_OSDEP_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel PRO/10GbE Linux driver
+ Copyright(c) 1999 - 2008 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include "ixgb.h"
+
+/* This is the only thing that needs to be changed to adjust the
+ * maximum number of ports that the driver can manage.
+ */
+
+#define IXGB_MAX_NIC 8
+
+#define OPTION_UNSET -1
+#define OPTION_DISABLED 0
+#define OPTION_ENABLED 1
+
+/* All parameters are treated the same, as an integer array of values.
+ * This macro just reduces the need to repeat the same declaration code
+ * over and over (plus this helps to avoid typo bugs).
+ */
+
+#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
+#define IXGB_PARAM(X, desc) \
+ static int __devinitdata X[IXGB_MAX_NIC+1] \
+ = IXGB_PARAM_INIT; \
+ static unsigned int num_##X = 0; \
+ module_param_array_named(X, X, int, &num_##X, 0); \
+ MODULE_PARM_DESC(X, desc);
+
+/* Transmit Descriptor Count
+ *
+ * Valid Range: 64-4096
+ *
+ * Default Value: 256
+ */
+
+IXGB_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+/* Receive Descriptor Count
+ *
+ * Valid Range: 64-4096
+ *
+ * Default Value: 1024
+ */
+
+IXGB_PARAM(RxDescriptors, "Number of receive descriptors");
+
+/* User Specified Flow Control Override
+ *
+ * Valid Range: 0-3
+ * - 0 - No Flow Control
+ * - 1 - Rx only, respond to PAUSE frames but do not generate them
+ * - 2 - Tx only, generate PAUSE frames but ignore them on receive
+ * - 3 - Full Flow Control Support
+ *
+ * Default Value: 2 - Tx only (silicon bug avoidance)
+ */
+
+IXGB_PARAM(FlowControl, "Flow Control setting");
+
+/* XsumRX - Receive Checksum Offload Enable/Disable
+ *
+ * Valid Range: 0, 1
+ * - 0 - disables all checksum offload
+ * - 1 - enables receive IP/TCP/UDP checksum offload
+ * on 82597 based NICs
+ *
+ * Default Value: 1
+ */
+
+IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
+
+/* Transmit Interrupt Delay in units of 0.8192 microseconds
+ *
+ * Valid Range: 0-65535
+ *
+ * Default Value: 32
+ */
+
+IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay");
+
+/* Receive Interrupt Delay in units of 0.8192 microseconds
+ *
+ * Valid Range: 0-65535
+ *
+ * Default Value: 72
+ */
+
+IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay");
+
+/* Receive Flow control high threshold (when we send a pause frame)
+ * (FCRTH)
+ *
+ * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity)
+ *
+ * Default Value: 196,608 (0x30000)
+ */
+
+IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold");
+
+/* Receive Flow control low threshold (when we send a resume frame)
+ * (FCRTL)
+ *
+ * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity)
+ * must be less than high threshold by at least 8 bytes
+ *
+ * Default Value: 163,840 (0x28000)
+ */
+
+IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold");
+
+/* Flow control request timeout (how long to pause the link partner's tx)
+ * (PAP 15:0)
+ *
+ * Valid Range: 1 - 65535
+ *
+ * Default Value: 65535 (0xffff) (we'll send an xon if we recover)
+ */
+
+IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout");
+
+/* Interrupt Delay Enable
+ *
+ * Valid Range: 0, 1
+ *
+ * - 0 - disables transmit interrupt delay
+ * - 1 - enables transmmit interrupt delay
+ *
+ * Default Value: 1
+ */
+
+IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
+
+
+#define DEFAULT_TIDV 32
+#define MAX_TIDV 0xFFFF
+#define MIN_TIDV 0
+
+#define DEFAULT_RDTR 72
+#define MAX_RDTR 0xFFFF
+#define MIN_RDTR 0
+
+#define XSUMRX_DEFAULT OPTION_ENABLED
+
+#define DEFAULT_FCRTL 0x28000
+#define DEFAULT_FCRTH 0x30000
+#define MIN_FCRTL 0
+#define MAX_FCRTL 0x3FFE8
+#define MIN_FCRTH 8
+#define MAX_FCRTH 0x3FFF0
+
+#define MIN_FCPAUSE 1
+#define MAX_FCPAUSE 0xffff
+#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */
+
+struct ixgb_option {
+ enum { enable_option, range_option, list_option } type;
+ const char *name;
+ const char *err;
+ int def;
+ union {
+ struct { /* range_option info */
+ int min;
+ int max;
+ } r;
+ struct { /* list_option info */
+ int nr;
+ const struct ixgb_opt_list {
+ int i;
+ const char *str;
+ } *p;
+ } l;
+ } arg;
+};
+
+static int __devinit
+ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
+{
+ if (*value == OPTION_UNSET) {
+ *value = opt->def;
+ return 0;
+ }
+
+ switch (opt->type) {
+ case enable_option:
+ switch (*value) {
+ case OPTION_ENABLED:
+ pr_info("%s Enabled\n", opt->name);
+ return 0;
+ case OPTION_DISABLED:
+ pr_info("%s Disabled\n", opt->name);
+ return 0;
+ }
+ break;
+ case range_option:
+ if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
+ pr_info("%s set to %i\n", opt->name, *value);
+ return 0;
+ }
+ break;
+ case list_option: {
+ int i;
+ const struct ixgb_opt_list *ent;
+
+ for (i = 0; i < opt->arg.l.nr; i++) {
+ ent = &opt->arg.l.p[i];
+ if (*value == ent->i) {
+ if (ent->str[0] != '\0')
+ pr_info("%s\n", ent->str);
+ return 0;
+ }
+ }
+ }
+ break;
+ default:
+ BUG();
+ }
+
+ pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
+ *value = opt->def;
+ return -1;
+}
+
+/**
+ * ixgb_check_options - Range Checking for Command Line Parameters
+ * @adapter: board private structure
+ *
+ * This routine checks all command line parameters for valid user
+ * input. If an invalid value is given, or if no user specified
+ * value exists, a default value is used. The final value is stored
+ * in a variable in the adapter structure.
+ **/
+
+void __devinit
+ixgb_check_options(struct ixgb_adapter *adapter)
+{
+ int bd = adapter->bd_number;
+ if (bd >= IXGB_MAX_NIC) {
+ pr_notice("Warning: no configuration for board #%i\n", bd);
+ pr_notice("Using defaults for all values\n");
+ }
+
+ { /* Transmit Descriptor Count */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Transmit Descriptors",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TXD),
+ .def = DEFAULT_TXD,
+ .arg = { .r = { .min = MIN_TXD,
+ .max = MAX_TXD}}
+ };
+ struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
+
+ if (num_TxDescriptors > bd) {
+ tx_ring->count = TxDescriptors[bd];
+ ixgb_validate_option(&tx_ring->count, &opt);
+ } else {
+ tx_ring->count = opt.def;
+ }
+ tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
+ }
+ { /* Receive Descriptor Count */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Receive Descriptors",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RXD),
+ .def = DEFAULT_RXD,
+ .arg = { .r = { .min = MIN_RXD,
+ .max = MAX_RXD}}
+ };
+ struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
+
+ if (num_RxDescriptors > bd) {
+ rx_ring->count = RxDescriptors[bd];
+ ixgb_validate_option(&rx_ring->count, &opt);
+ } else {
+ rx_ring->count = opt.def;
+ }
+ rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
+ }
+ { /* Receive Checksum Offload Enable */
+ const struct ixgb_option opt = {
+ .type = enable_option,
+ .name = "Receive Checksum Offload",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_XsumRX > bd) {
+ unsigned int rx_csum = XsumRX[bd];
+ ixgb_validate_option(&rx_csum, &opt);
+ adapter->rx_csum = rx_csum;
+ } else {
+ adapter->rx_csum = opt.def;
+ }
+ }
+ { /* Flow Control */
+
+ static const struct ixgb_opt_list fc_list[] = {
+ { ixgb_fc_none, "Flow Control Disabled" },
+ { ixgb_fc_rx_pause, "Flow Control Receive Only" },
+ { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
+ { ixgb_fc_full, "Flow Control Enabled" },
+ { ixgb_fc_default, "Flow Control Hardware Default" }
+ };
+
+ static const struct ixgb_option opt = {
+ .type = list_option,
+ .name = "Flow Control",
+ .err = "reading default settings from EEPROM",
+ .def = ixgb_fc_tx_pause,
+ .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
+ .p = fc_list }}
+ };
+
+ if (num_FlowControl > bd) {
+ unsigned int fc = FlowControl[bd];
+ ixgb_validate_option(&fc, &opt);
+ adapter->hw.fc.type = fc;
+ } else {
+ adapter->hw.fc.type = opt.def;
+ }
+ }
+ { /* Receive Flow Control High Threshold */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Rx Flow Control High Threshold",
+ .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
+ .def = DEFAULT_FCRTH,
+ .arg = { .r = { .min = MIN_FCRTH,
+ .max = MAX_FCRTH}}
+ };
+
+ if (num_RxFCHighThresh > bd) {
+ adapter->hw.fc.high_water = RxFCHighThresh[bd];
+ ixgb_validate_option(&adapter->hw.fc.high_water, &opt);
+ } else {
+ adapter->hw.fc.high_water = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring RxFCHighThresh when no RxFC\n");
+ }
+ { /* Receive Flow Control Low Threshold */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Rx Flow Control Low Threshold",
+ .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
+ .def = DEFAULT_FCRTL,
+ .arg = { .r = { .min = MIN_FCRTL,
+ .max = MAX_FCRTL}}
+ };
+
+ if (num_RxFCLowThresh > bd) {
+ adapter->hw.fc.low_water = RxFCLowThresh[bd];
+ ixgb_validate_option(&adapter->hw.fc.low_water, &opt);
+ } else {
+ adapter->hw.fc.low_water = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring RxFCLowThresh when no RxFC\n");
+ }
+ { /* Flow Control Pause Time Request*/
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Flow Control Pause Time Request",
+ .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
+ .def = DEFAULT_FCPAUSE,
+ .arg = { .r = { .min = MIN_FCPAUSE,
+ .max = MAX_FCPAUSE}}
+ };
+
+ if (num_FCReqTimeout > bd) {
+ unsigned int pause_time = FCReqTimeout[bd];
+ ixgb_validate_option(&pause_time, &opt);
+ adapter->hw.fc.pause_time = pause_time;
+ } else {
+ adapter->hw.fc.pause_time = opt.def;
+ }
+ if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
+ pr_info("Ignoring FCReqTimeout when no RxFC\n");
+ }
+ /* high low and spacing check for rx flow control thresholds */
+ if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
+ /* high must be greater than low */
+ if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
+ /* set defaults */
+ pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
+ adapter->hw.fc.high_water = DEFAULT_FCRTH;
+ adapter->hw.fc.low_water = DEFAULT_FCRTL;
+ }
+ }
+ { /* Receive Interrupt Delay */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Receive Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
+ .def = DEFAULT_RDTR,
+ .arg = { .r = { .min = MIN_RDTR,
+ .max = MAX_RDTR}}
+ };
+
+ if (num_RxIntDelay > bd) {
+ adapter->rx_int_delay = RxIntDelay[bd];
+ ixgb_validate_option(&adapter->rx_int_delay, &opt);
+ } else {
+ adapter->rx_int_delay = opt.def;
+ }
+ }
+ { /* Transmit Interrupt Delay */
+ const struct ixgb_option opt = {
+ .type = range_option,
+ .name = "Transmit Interrupt Delay",
+ .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
+ .def = DEFAULT_TIDV,
+ .arg = { .r = { .min = MIN_TIDV,
+ .max = MAX_TIDV}}
+ };
+
+ if (num_TxIntDelay > bd) {
+ adapter->tx_int_delay = TxIntDelay[bd];
+ ixgb_validate_option(&adapter->tx_int_delay, &opt);
+ } else {
+ adapter->tx_int_delay = opt.def;
+ }
+ }
+
+ { /* Transmit Interrupt Delay Enable */
+ const struct ixgb_option opt = {
+ .type = enable_option,
+ .name = "Tx Interrupt Delay Enable",
+ .err = "defaulting to Enabled",
+ .def = OPTION_ENABLED
+ };
+
+ if (num_IntDelayEnable > bd) {
+ unsigned int ide = IntDelayEnable[bd];
+ ixgb_validate_option(&ide, &opt);
+ adapter->tx_int_delay_enable = ide;
+ } else {
+ adapter->tx_int_delay_enable = opt.def;
+ }
+ }
+}
--- /dev/null
+################################################################################
+#
+# Intel 10 Gigabit PCI Express Linux driver
+# Copyright(c) 1999 - 2010 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# Linux NICS <linux.nics@intel.com>
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 10GbE PCI Express ethernet driver
+#
+
+obj-$(CONFIG_IXGBE) += ixgbe.o
+
+ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
+ ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
+ ixgbe_mbx.o ixgbe_x540.o
+
+ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \
+ ixgbe_dcb_82599.o ixgbe_dcb_nl.o
+
+ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_H_
+#define _IXGBE_H_
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/cpumask.h>
+#include <linux/aer.h>
+#include <linux/if_vlan.h>
+
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_dcb.h"
+#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
+#define IXGBE_FCOE
+#include "ixgbe_fcoe.h"
+#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
+#ifdef CONFIG_IXGBE_DCA
+#include <linux/dca.h>
+#endif
+
+/* common prefix used by pr_<> macros */
+#undef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+/* TX/RX descriptor defines */
+#define IXGBE_DEFAULT_TXD 512
+#define IXGBE_MAX_TXD 4096
+#define IXGBE_MIN_TXD 64
+
+#define IXGBE_DEFAULT_RXD 512
+#define IXGBE_MAX_RXD 4096
+#define IXGBE_MIN_RXD 64
+
+/* flow control */
+#define IXGBE_MIN_FCRTL 0x40
+#define IXGBE_MAX_FCRTL 0x7FF80
+#define IXGBE_MIN_FCRTH 0x600
+#define IXGBE_MAX_FCRTH 0x7FFF0
+#define IXGBE_DEFAULT_FCPAUSE 0xFFFF
+#define IXGBE_MIN_FCPAUSE 0
+#define IXGBE_MAX_FCPAUSE 0xFFFF
+
+/* Supported Rx Buffer Sizes */
+#define IXGBE_RXBUFFER_512 512 /* Used for packet split */
+#define IXGBE_RXBUFFER_2048 2048
+#define IXGBE_RXBUFFER_4096 4096
+#define IXGBE_RXBUFFER_8192 8192
+#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */
+
+/*
+ * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we
+ * reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
+ * this adds up to 512 bytes of extra data meaning the smallest allocation
+ * we could have is 1K.
+ * i.e. RXBUFFER_512 --> size-1024 slab
+ */
+#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512
+
+#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define IXGBE_TX_FLAGS_CSUM (u32)(1)
+#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1)
+#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2)
+#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3)
+#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FSO (u32)(1 << 5)
+#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
+#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+
+#define IXGBE_MAX_RSC_INT_RATE 162760
+
+#define IXGBE_MAX_VF_MC_ENTRIES 30
+#define IXGBE_MAX_VF_FUNCTIONS 64
+#define IXGBE_MAX_VFTA_ENTRIES 128
+#define MAX_EMULATION_MAC_ADDRS 16
+#define IXGBE_MAX_PF_MACVLANS 15
+#define VMDQ_P(p) ((p) + adapter->num_vfs)
+
+struct vf_data_storage {
+ unsigned char vf_mac_addresses[ETH_ALEN];
+ u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES];
+ u16 num_vf_mc_hashes;
+ u16 default_vf_vlan_id;
+ u16 vlans_enabled;
+ bool clear_to_send;
+ bool pf_set_mac;
+ u16 pf_vlan; /* When set, guest VLAN config not allowed. */
+ u16 pf_qos;
+ u16 tx_rate;
+};
+
+struct vf_macvlans {
+ struct list_head l;
+ int vf;
+ int rar_entry;
+ bool free;
+ bool is_macvlan;
+ u8 vf_macvlan[ETH_ALEN];
+};
+
+#define IXGBE_MAX_TXD_PWR 14
+#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD)
+#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4)
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgbe_tx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ unsigned int bytecount;
+ u16 gso_segs;
+ u8 mapped_as_page;
+};
+
+struct ixgbe_rx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ dma_addr_t page_dma;
+ unsigned int page_offset;
+};
+
+struct ixgbe_queue_stats {
+ u64 packets;
+ u64 bytes;
+};
+
+struct ixgbe_tx_queue_stats {
+ u64 restart_queue;
+ u64 tx_busy;
+ u64 completed;
+ u64 tx_done_old;
+};
+
+struct ixgbe_rx_queue_stats {
+ u64 rsc_count;
+ u64 rsc_flush;
+ u64 non_eop_descs;
+ u64 alloc_rx_page_failed;
+ u64 alloc_rx_buff_failed;
+};
+
+enum ixbge_ring_state_t {
+ __IXGBE_TX_FDIR_INIT_DONE,
+ __IXGBE_TX_DETECT_HANG,
+ __IXGBE_HANG_CHECK_ARMED,
+ __IXGBE_RX_PS_ENABLED,
+ __IXGBE_RX_RSC_ENABLED,
+};
+
+#define ring_is_ps_enabled(ring) \
+ test_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define set_ring_ps_enabled(ring) \
+ set_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define clear_ring_ps_enabled(ring) \
+ clear_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
+#define check_for_tx_hang(ring) \
+ test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define set_check_for_tx_hang(ring) \
+ set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define clear_check_for_tx_hang(ring) \
+ clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
+#define ring_is_rsc_enabled(ring) \
+ test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define set_ring_rsc_enabled(ring) \
+ set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+#define clear_ring_rsc_enabled(ring) \
+ clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
+struct ixgbe_ring {
+ void *desc; /* descriptor ring memory */
+ struct device *dev; /* device for DMA mapping */
+ struct net_device *netdev; /* netdev ring belongs to */
+ union {
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ struct ixgbe_rx_buffer *rx_buffer_info;
+ };
+ unsigned long state;
+ u8 __iomem *tail;
+
+ u16 count; /* amount of descriptors */
+ u16 rx_buf_len;
+
+ u8 queue_index; /* needed for multiqueue queue management */
+ u8 reg_idx; /* holds the special value that gets
+ * the hardware register offset
+ * associated with this ring, which is
+ * different for DCB and RSS modes
+ */
+ u8 atr_sample_rate;
+ u8 atr_count;
+
+ u16 next_to_use;
+ u16 next_to_clean;
+
+ u8 dcb_tc;
+ struct ixgbe_queue_stats stats;
+ struct u64_stats_sync syncp;
+ union {
+ struct ixgbe_tx_queue_stats tx_stats;
+ struct ixgbe_rx_queue_stats rx_stats;
+ };
+ int numa_node;
+ unsigned int size; /* length in bytes */
+ dma_addr_t dma; /* phys. address of descriptor ring */
+ struct rcu_head rcu;
+ struct ixgbe_q_vector *q_vector; /* back-pointer to host q_vector */
+} ____cacheline_internodealigned_in_smp;
+
+enum ixgbe_ring_f_enum {
+ RING_F_NONE = 0,
+ RING_F_VMDQ, /* SR-IOV uses the same ring feature */
+ RING_F_RSS,
+ RING_F_FDIR,
+#ifdef IXGBE_FCOE
+ RING_F_FCOE,
+#endif /* IXGBE_FCOE */
+
+ RING_F_ARRAY_SIZE /* must be last in enum set */
+};
+
+#define IXGBE_MAX_RSS_INDICES 16
+#define IXGBE_MAX_VMDQ_INDICES 64
+#define IXGBE_MAX_FDIR_INDICES 64
+#ifdef IXGBE_FCOE
+#define IXGBE_MAX_FCOE_INDICES 8
+#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
+#else
+#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES
+#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES
+#endif /* IXGBE_FCOE */
+struct ixgbe_ring_feature {
+ int indices;
+ int mask;
+} ____cacheline_internodealigned_in_smp;
+
+struct ixgbe_ring_container {
+#if MAX_RX_QUEUES > MAX_TX_QUEUES
+ DECLARE_BITMAP(idx, MAX_RX_QUEUES);
+#else
+ DECLARE_BITMAP(idx, MAX_TX_QUEUES);
+#endif
+ unsigned int total_bytes; /* total bytes processed this int */
+ unsigned int total_packets; /* total packets processed this int */
+ u16 work_limit; /* total work allowed per interrupt */
+ u8 count; /* total number of rings in vector */
+ u8 itr; /* current ITR setting for ring */
+};
+
+#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \
+ ? 8 : 1)
+#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ixgbe_q_vector {
+ struct ixgbe_adapter *adapter;
+ unsigned int v_idx; /* index of q_vector within array, also used for
+ * finding the bit in EICR and friends that
+ * represents the vector for this ring */
+#ifdef CONFIG_IXGBE_DCA
+ int cpu; /* CPU for DCA */
+#endif
+ struct napi_struct napi;
+ struct ixgbe_ring_container rx, tx;
+ u32 eitr;
+ cpumask_var_t affinity_mask;
+ char name[IFNAMSIZ + 9];
+};
+
+/* Helper macros to switch between ints/sec and what the register uses.
+ * And yes, it's the same math going both ways. The lowest value
+ * supported by all of the ixgbe hardware is 8.
+ */
+#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
+ ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
+#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
+
+static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring)
+{
+ u16 ntc = ring->next_to_clean;
+ u16 ntu = ring->next_to_use;
+
+ return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
+}
+
+#define IXGBE_RX_DESC_ADV(R, i) \
+ (&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
+#define IXGBE_TX_DESC_ADV(R, i) \
+ (&(((union ixgbe_adv_tx_desc *)((R)->desc))[i]))
+#define IXGBE_TX_CTXTDESC_ADV(R, i) \
+ (&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i]))
+
+#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
+#ifdef IXGBE_FCOE
+/* Use 3K as the baby jumbo frame size for FCoE */
+#define IXGBE_FCOE_JUMBO_FRAME_SIZE 3072
+#endif /* IXGBE_FCOE */
+
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR)
+
+#define MAX_MSIX_VECTORS_82599 64
+#define MAX_MSIX_Q_VECTORS_82599 64
+#define MAX_MSIX_VECTORS_82598 18
+#define MAX_MSIX_Q_VECTORS_82598 16
+
+#define MAX_MSIX_Q_VECTORS MAX_MSIX_Q_VECTORS_82599
+#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82599
+
+#define MIN_MSIX_Q_VECTORS 2
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
+/* board specific private data structure */
+struct ixgbe_adapter {
+ unsigned long state;
+
+ /* Some features need tri-state capability,
+ * thus the additional *_CAPABLE flags.
+ */
+ u32 flags;
+#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
+#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1)
+#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2)
+#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3)
+#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6)
+#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7)
+#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8)
+#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9)
+#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10)
+#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11)
+#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12)
+#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13)
+#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14)
+#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16)
+#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17)
+#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18)
+#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19)
+#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20)
+#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22)
+#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 23)
+#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 24)
+#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 25)
+#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 26)
+#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 27)
+#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 28)
+#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 29)
+
+ u32 flags2;
+#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1)
+#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1)
+#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2)
+#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 3)
+#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 4)
+#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 5)
+#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 6)
+#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7)
+
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u16 bd_number;
+ struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
+
+ /* DCB parameters */
+ struct ieee_pfc *ixgbe_ieee_pfc;
+ struct ieee_ets *ixgbe_ieee_ets;
+ struct ixgbe_dcb_config dcb_cfg;
+ struct ixgbe_dcb_config temp_dcb_cfg;
+ u8 dcb_set_bitmap;
+ u8 dcbx_cap;
+ enum ixgbe_fc_mode last_lfc_mode;
+
+ /* Interrupt Throttle Rate */
+ u32 rx_itr_setting;
+ u32 tx_itr_setting;
+ u16 eitr_low;
+ u16 eitr_high;
+
+ /* Work limits */
+ u16 tx_work_limit;
+
+ /* TX */
+ struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
+ int num_tx_queues;
+ u32 tx_timeout_count;
+ bool detect_tx_hung;
+
+ u64 restart_queue;
+ u64 lsc_int;
+
+ /* RX */
+ struct ixgbe_ring *rx_ring[MAX_RX_QUEUES] ____cacheline_aligned_in_smp;
+ int num_rx_queues;
+ int num_rx_pools; /* == num_rx_queues in 82598 */
+ int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */
+ u64 hw_csum_rx_error;
+ u64 hw_rx_no_dma_resources;
+ u64 non_eop_descs;
+ int num_msix_vectors;
+ int max_msix_q_vectors; /* true count of q_vectors for device */
+ struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+ struct msix_entry *msix_entries;
+
+ u32 alloc_rx_page_failed;
+ u32 alloc_rx_buff_failed;
+
+/* default to trying for four seconds */
+#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
+
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ u32 test_icr;
+ struct ixgbe_ring test_tx_ring;
+ struct ixgbe_ring test_rx_ring;
+
+ /* structs defined in ixgbe_hw.h */
+ struct ixgbe_hw hw;
+ u16 msg_enable;
+ struct ixgbe_hw_stats stats;
+
+ /* Interrupt Throttle Rate */
+ u32 rx_eitr_param;
+ u32 tx_eitr_param;
+
+ u64 tx_busy;
+ unsigned int tx_ring_count;
+ unsigned int rx_ring_count;
+
+ u32 link_speed;
+ bool link_up;
+ unsigned long link_check_timeout;
+
+ struct work_struct service_task;
+ struct timer_list service_timer;
+ u32 fdir_pballoc;
+ u32 atr_sample_rate;
+ unsigned long fdir_overflow; /* number of times ATR was backed off */
+ spinlock_t fdir_perfect_lock;
+#ifdef IXGBE_FCOE
+ struct ixgbe_fcoe fcoe;
+#endif /* IXGBE_FCOE */
+ u64 rsc_total_count;
+ u64 rsc_total_flush;
+ u32 wol;
+ u16 eeprom_version;
+
+ int node;
+ u32 led_reg;
+ u32 interrupt_event;
+ char lsc_int_name[IFNAMSIZ + 9];
+
+ /* SR-IOV */
+ DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
+ unsigned int num_vfs;
+ struct vf_data_storage *vfinfo;
+ int vf_rate_link_speed;
+ struct vf_macvlans vf_mvs;
+ struct vf_macvlans *mv_list;
+ bool antispoofing_enabled;
+
+ struct hlist_head fdir_filter_list;
+ union ixgbe_atr_input fdir_mask;
+ int fdir_filter_count;
+};
+
+struct ixgbe_fdir_filter {
+ struct hlist_node fdir_node;
+ union ixgbe_atr_input filter;
+ u16 sw_idx;
+ u16 action;
+};
+
+enum ixbge_state_t {
+ __IXGBE_TESTING,
+ __IXGBE_RESETTING,
+ __IXGBE_DOWN,
+ __IXGBE_SERVICE_SCHED,
+ __IXGBE_IN_SFP_INIT,
+};
+
+struct ixgbe_rsc_cb {
+ dma_addr_t dma;
+ u16 skb_cnt;
+ bool delay_unmap;
+};
+#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb)
+
+enum ixgbe_boards {
+ board_82598,
+ board_82599,
+ board_X540,
+};
+
+extern struct ixgbe_info ixgbe_82598_info;
+extern struct ixgbe_info ixgbe_82599_info;
+extern struct ixgbe_info ixgbe_X540_info;
+#ifdef CONFIG_IXGBE_DCB
+extern const struct dcbnl_rtnl_ops dcbnl_ops;
+extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
+ struct ixgbe_dcb_config *dst_dcb_cfg,
+ int tc_max);
+#endif
+
+extern char ixgbe_driver_name[];
+extern const char ixgbe_driver_version[];
+
+extern int ixgbe_up(struct ixgbe_adapter *adapter);
+extern void ixgbe_down(struct ixgbe_adapter *adapter);
+extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter);
+extern void ixgbe_reset(struct ixgbe_adapter *adapter);
+extern void ixgbe_set_ethtool_ops(struct net_device *netdev);
+extern int ixgbe_setup_rx_resources(struct ixgbe_ring *);
+extern int ixgbe_setup_tx_resources(struct ixgbe_ring *);
+extern void ixgbe_free_rx_resources(struct ixgbe_ring *);
+extern void ixgbe_free_tx_resources(struct ixgbe_ring *);
+extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
+extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
+extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *);
+extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
+extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
+extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
+ struct ixgbe_adapter *,
+ struct ixgbe_ring *);
+extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *,
+ struct ixgbe_tx_buffer *);
+extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16);
+extern void ixgbe_write_eitr(struct ixgbe_q_vector *);
+extern int ethtool_ioctl(struct ifreq *ifr);
+extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl);
+extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
+ u8 queue);
+extern s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input_mask);
+extern s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id, u8 queue);
+extern s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id);
+extern void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+ union ixgbe_atr_input *mask);
+extern void ixgbe_set_rx_mode(struct net_device *netdev);
+extern int ixgbe_setup_tc(struct net_device *dev, u8 tc);
+extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32);
+extern void ixgbe_do_reset(struct net_device *netdev);
+#ifdef IXGBE_FCOE
+extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+ u32 tx_flags, u8 *hdr_len);
+extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter);
+extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+ union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb,
+ u32 staterr);
+extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc);
+extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc);
+extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
+extern int ixgbe_fcoe_enable(struct net_device *netdev);
+extern int ixgbe_fcoe_disable(struct net_device *netdev);
+#ifdef CONFIG_IXGBE_DCB
+extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
+extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
+#endif /* CONFIG_IXGBE_DCB */
+extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
+#endif /* IXGBE_FCOE */
+
+#endif /* _IXGBE_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82598_MAX_TX_QUEUES 32
+#define IXGBE_82598_MAX_RX_QUEUES 64
+#define IXGBE_82598_RAR_ENTRIES 16
+#define IXGBE_82598_MC_TBL_SIZE 128
+#define IXGBE_82598_VFT_TBL_SIZE 128
+#define IXGBE_82598_RX_PB_SIZE 512
+
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+
+/**
+ * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
+ * @hw: pointer to the HW structure
+ *
+ * The defaults for 82598 should be in the range of 50us to 50ms,
+ * however the hardware default for these parts is 500us to 1ms which is less
+ * than the 10ms recommended by the pci-e spec. To address this we need to
+ * increase the value to either 10ms to 250ms for capability version 1 config,
+ * or 16ms to 55ms for version 2.
+ **/
+static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
+ u16 pcie_devctl2;
+
+ /* only take action if timeout value is defaulted to 0 */
+ if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
+ goto out;
+
+ /*
+ * if capababilities version is type 1 we can write the
+ * timeout of 10ms to 250ms through the GCR register
+ */
+ if (!(gcr & IXGBE_GCR_CAP_VER2)) {
+ gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
+ goto out;
+ }
+
+ /*
+ * for version 2 capabilities we need to write the config space
+ * directly in order to set the completion timeout value for
+ * 16ms to 55ms
+ */
+ pci_read_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
+ pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
+ pci_write_config_word(adapter->pdev,
+ IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
+out:
+ /* disable completion timeout resend */
+ gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
+}
+
+/**
+ * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u16 msix_count;
+ pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS,
+ &msix_count);
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW, so increment to give proper value */
+ msix_count++;
+
+ return msix_count;
+}
+
+/**
+ */
+static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ /* Call PHY identify routine to get the phy type */
+ ixgbe_identify_phy_generic(hw);
+
+ mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during get_invariants because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+ u16 list_offset, data_offset;
+
+ /* Identify the PHY */
+ phy->ops.identify(hw);
+
+ /* Overwrite the link function pointers if copper PHY */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+ phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_tnx;
+ break;
+ case ixgbe_phy_nl:
+ phy->ops.reset = &ixgbe_reset_phy_nl;
+
+ /* Call SFP+ identify routine to get the SFP+ module type */
+ ret_val = phy->ops.identify_sfp(hw);
+ if (ret_val != 0)
+ goto out;
+ else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Check to see if SFP+ module is supported */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
+ &list_offset,
+ &data_offset);
+ if (ret_val != 0) {
+ ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ break;
+ default:
+ break;
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function.
+ * Disables relaxed ordering Then set pcie completion timeout
+ *
+ **/
+static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
+{
+ u32 regval;
+ u32 i;
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; ((i < hw->mac.max_tx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
+ }
+
+ for (i = 0; ((i < hw->mac.max_rx_queues) &&
+ (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
+
+ /* set the completion timeout for interface */
+ if (ret_val == 0)
+ ixgbe_set_pcie_completion_timeout(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82598 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = 0;
+ u32 autoc = 0;
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *autoneg = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *autoneg = true;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82598 - Determines media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ default:
+ break;
+ }
+
+ /* Media type for I82598 is based on device ID */
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598:
+ case IXGBE_DEV_ID_82598_BX:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ case IXGBE_DEV_ID_82598EB_SFP_LOM:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82598EB_CX4:
+ case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
+ media_type = ixgbe_media_type_cx4;
+ break;
+ case IXGBE_DEV_ID_82598AT:
+ case IXGBE_DEV_ID_82598AT2:
+ media_type = ixgbe_media_type_copper;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_fc_enable_82598 - Enable flow control
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Enable flow control according to the current settings.
+ **/
+static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ s32 ret_val = 0;
+ u32 fctrl_reg;
+ u32 rmcs_reg;
+ u32 reg;
+ u32 rx_pba_size;
+ u32 link_speed = 0;
+ bool link_up;
+
+#ifdef CONFIG_DCB
+ if (hw->fc.requested_mode == ixgbe_fc_pfc)
+ goto out;
+
+#endif /* CONFIG_DCB */
+ /*
+ * On 82598 having Rx FC on causes resets while doing 1G
+ * so if it's on turn it off once we know link_speed. For
+ * more details see 82598 Specification update.
+ */
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_full:
+ hw->fc.requested_mode = ixgbe_fc_tx_pause;
+ break;
+ case ixgbe_fc_rx_pause:
+ hw->fc.requested_mode = ixgbe_fc_none;
+ break;
+ default:
+ /* no change */
+ break;
+ }
+ }
+
+ /* Negotiate the fc mode to use */
+ ret_val = ixgbe_fc_autoneg(hw);
+ if (ret_val == IXGBE_ERR_FLOW_CONTROL)
+ goto out;
+
+ /* Disable any previous flow control settings */
+ fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+ rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
+ * 4: Priority Flow Control is enabled.
+#endif
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /*
+ * Flow control is disabled by software override or autoneg.
+ * The code below will actually disable it in the HW.
+ */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ fctrl_reg |= IXGBE_FCTRL_RFCE;
+ rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+ break;
+#ifdef CONFIG_DCB
+ case ixgbe_fc_pfc:
+ goto out;
+ break;
+#endif /* CONFIG_DCB */
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Set 802.3x based flow control settings. */
+ fctrl_reg |= IXGBE_FCTRL_DPF;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+ /* Set up and enable Rx high/low water mark thresholds, enable XON. */
+ if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+ rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+ rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+
+ reg = (rx_pba_size - hw->fc.low_water) << 6;
+ if (hw->fc.send_xon)
+ reg |= IXGBE_FCRTL_XONE;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
+
+ reg = (rx_pba_size - hw->fc.high_water) << 6;
+ reg |= IXGBE_FCRTH_FCEN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
+ }
+
+ /* Configure pause time (2 TCs per register) */
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
+ if ((packetbuf_num & 1) == 0)
+ reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
+ else
+ reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_start_mac_link_82598 - Configures MAC link settings
+ * @hw: pointer to hardware structure
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = 0;
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autonegotiation did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_link_ready - Function looks for phy link
+ * @hw: pointer to hardware structure
+ *
+ * Function indicates success when phy link is available. If phy is not ready
+ * within 5 seconds of MAC indicating link, the function returns error.
+ **/
+static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
+{
+ u32 timeout;
+ u16 an_reg;
+
+ if (hw->device_id != IXGBE_DEV_ID_82598AT2)
+ return 0;
+
+ for (timeout = 0;
+ timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
+ hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg);
+
+ if ((an_reg & MDIO_AN_STAT1_COMPLETE) &&
+ (an_reg & MDIO_STAT1_LSTATUS))
+ break;
+
+ msleep(100);
+ }
+
+ if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
+ hw_dbg(hw, "Link was indicated but link is down\n");
+ return IXGBE_ERR_LINK_SETUP;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_check_mac_link_82598 - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed, bool *link_up,
+ bool link_up_wait_to_complete)
+{
+ u32 links_reg;
+ u32 i;
+ u16 link_reg, adapt_comp_reg;
+
+ /*
+ * SERDES PHY requires us to read link status from register 0xC79F.
+ * Bit 0 set indicates link is up/ready; clear indicates link down.
+ * 0xC00C is read to check that the XAUI lanes are active. Bit 0
+ * clear indicates active; set indicates inactive.
+ */
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
+ &adapt_comp_reg);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if ((link_reg & 1) &&
+ ((adapt_comp_reg & 1) == 0)) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ hw->phy.ops.read_reg(hw, 0xC79F,
+ MDIO_MMD_PMAPMD,
+ &link_reg);
+ hw->phy.ops.read_reg(hw, 0xC00C,
+ MDIO_MMD_PMAPMD,
+ &adapt_comp_reg);
+ }
+ } else {
+ if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (*link_up == false)
+ goto out;
+ }
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if (links_reg & IXGBE_LINKS_SPEED)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) &&
+ (ixgbe_validate_link_ready(hw) != 0))
+ *link_up = false;
+
+ /* if link is down, zero out the current_mode */
+ if (*link_up == false) {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw->fc.fc_was_autonegged = false;
+ }
+out:
+ return 0;
+}
+
+/**
+ * ixgbe_setup_mac_link_82598 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if auto-negotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc = curr_autoc;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+
+ /* Check to see if speed passed in is supported. */
+ ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN)
+ status = IXGBE_ERR_LINK_SETUP;
+
+ /* Set KX4/KX support according to speed requested */
+ else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+ autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ if (autoc != curr_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+ }
+
+ if (status == 0) {
+ /*
+ * Setup and restart the link based on the new values in
+ * ixgbe_hw This will write the AUTOC register based on the new
+ * stored values
+ */
+ status = ixgbe_start_mac_link_82598(hw,
+ autoneg_wait_to_complete);
+ }
+
+ return status;
+}
+
+
+/**
+ * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82598 - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks and
+ * clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ * reset.
+ **/
+static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ s32 phy_status = 0;
+ u32 ctrl;
+ u32 gheccr;
+ u32 i;
+ u32 autoc;
+ u8 analog_val;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /*
+ * Power up the Atlas Tx lanes if they are currently powered down.
+ * Atlas Tx lanes are powered down for MAC loopback tests, but
+ * they are not automatically restored on reset.
+ */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
+ if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
+ /* Enable Tx Atlas so packets can be transmitted again */
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
+ analog_val);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ &analog_val);
+ analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
+ analog_val);
+ }
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false) {
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Init PHY and function pointers, perform SFP setup */
+ phy_status = hw->phy.ops.init(hw);
+ if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+ else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto no_phy_reset;
+
+ hw->phy.ops.reset(hw);
+ }
+
+no_phy_reset:
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests before reset
+ */
+ ixgbe_disable_pcie_master(hw);
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete. We use 1usec since that is
+ * what is needed for ixgbe_disable_pcie_master(). The second reset
+ * then clears out any effects of those events.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ udelay(1);
+ goto mac_reset_top;
+ }
+
+ msleep(50);
+
+ gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+ gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+ IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+ /*
+ * Store the original AUTOC value if it has not been
+ * stored off yet. Otherwise restore the stored original
+ * AUTOC value since the reset operation sets back to deaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_link_settings_stored = true;
+ } else if (autoc != hw->mac.orig_autoc) {
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table
+ */
+ hw->mac.ops.init_rx_addrs(hw);
+
+reset_hw_out:
+ if (phy_status)
+ status = phy_status;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq set index
+ **/
+static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
+ **/
+static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
+ if (rar_high & IXGBE_RAH_VIND_MASK) {
+ rar_high &= ~IXGBE_RAH_VIND_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_vfta_82598 - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFTA
+ * @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ u32 regindex;
+ u32 bitindex;
+ u32 bits;
+ u32 vftabyte;
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /* Determine 32-bit word position in array */
+ regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
+
+ /* Determine the location of the (VMD) queue index */
+ vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+ bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
+
+ /* Set the nibble for VMD queue index */
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
+ bits &= (~(0x0F << bitindex));
+ bits |= (vind << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
+
+ /* Determine the location of the bit for this VLAN id */
+ bitindex = vlan & 0x1F; /* lower five bits */
+
+ bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+ if (vlan_on)
+ /* Turn on this VLAN id */
+ bits |= (1 << bitindex);
+ else
+ /* Turn off this VLAN id */
+ bits &= ~(1 << bitindex);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta_82598 - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
+{
+ u32 offset;
+ u32 vlanbyte;
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+ 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Atlas analog register specified.
+ **/
+static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 atlas_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
+ IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+ *val = (u8)atlas_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Atlas analog register specified.
+ **/
+static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 atlas_ctl;
+
+ atlas_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ s32 status = 0;
+ u16 sfp_addr = 0;
+ u16 sfp_data = 0;
+ u16 sfp_stat = 0;
+ u32 i;
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ /*
+ * phy SDA/SCL registers are at addresses 0xC30A to
+ * 0xC30D. These registers are used to talk to the SFP+
+ * module's EEPROM through the SDA/SCL (I2C) interface.
+ */
+ sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
+ sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
+ MDIO_MMD_PMAPMD,
+ sfp_addr);
+
+ /* Poll status */
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
+ MDIO_MMD_PMAPMD,
+ &sfp_stat);
+ sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
+ break;
+ usleep_range(10000, 20000);
+ }
+
+ if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
+ hw_dbg(hw, "EEPROM read did not pass.\n");
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* Read data */
+ hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
+ MDIO_MMD_PMAPMD, &sfp_data);
+
+ *eeprom_data = (u8)(sfp_data >> 8);
+ } else {
+ status = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u16 ext_ability = 0;
+
+ hw->phy.ops.identify(hw);
+
+ /* Copper PHY must be checked before AUTOC LMS to determine correct
+ * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ case ixgbe_phy_cu_unknown:
+ hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE,
+ MDIO_MMD_PMAPMD, &ext_ability);
+ if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_AN:
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ else
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+ break;
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ else /* XAUI */
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ case IXGBE_AUTOC_LMS_KX4_AN:
+ case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ break;
+ default:
+ break;
+ }
+
+ if (hw->phy.type == ixgbe_phy_nl) {
+ hw->phy.ops.identify_sfp(hw);
+
+ switch (hw->phy.sfp_type) {
+ case ixgbe_sfp_type_da_cu:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_sfp_type_sr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case ixgbe_sfp_type_lr:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ break;
+ }
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+ case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+ case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ break;
+ case IXGBE_DEV_ID_82598EB_XF_LR:
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+out:
+ return physical_layer;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
+ * port devices.
+ * @hw: pointer to the HW structure
+ *
+ * Calls common function and corrects issue with some single port devices
+ * that enable LAN1 but not LAN0.
+ **/
+static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u16 pci_gen = 0;
+ u16 pci_ctrl2 = 0;
+
+ ixgbe_set_lan_id_multi_port_pcie(hw);
+
+ /* check if LAN0 is disabled */
+ hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
+ if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
+
+ hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
+
+ /* if LAN0 is completely disabled force function to 0 */
+ if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
+ !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
+
+ bus->func = 0;
+ }
+ }
+}
+
+/**
+ * ixgbe_set_rxpba_82598 - Configure packet buffers
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure packet buffers.
+ */
+static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
+ int strategy)
+{
+ u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
+ u8 i = 0;
+
+ if (!num_pb)
+ return;
+
+ /* Setup Rx packet buffer sizes */
+ switch (strategy) {
+ case PBA_STRATEGY_WEIGHTED:
+ /* Setup the first four at 80KB */
+ rxpktsize = IXGBE_RXPBSIZE_80KB;
+ for (; i < 4; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ /* Setup the last four at 48KB...don't re-init i */
+ rxpktsize = IXGBE_RXPBSIZE_48KB;
+ /* Fall Through */
+ case PBA_STRATEGY_EQUAL:
+ default:
+ /* Divide the remaining Rx packet buffer evenly among the TCs */
+ for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ break;
+ }
+
+ /* Setup Tx packet buffer sizes */
+ for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
+
+ return;
+}
+
+static struct ixgbe_mac_operations mac_ops_82598 = {
+ .init_hw = &ixgbe_init_hw_generic,
+ .reset_hw = &ixgbe_reset_hw_82598,
+ .start_hw = &ixgbe_start_hw_82598,
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
+ .get_media_type = &ixgbe_get_media_type_82598,
+ .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
+ .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
+ .get_mac_addr = &ixgbe_get_mac_addr_generic,
+ .stop_adapter = &ixgbe_stop_adapter_generic,
+ .get_bus_info = &ixgbe_get_bus_info_generic,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598,
+ .read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
+ .write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
+ .setup_link = &ixgbe_setup_mac_link_82598,
+ .set_rxpba = &ixgbe_set_rxpba_82598,
+ .check_link = &ixgbe_check_mac_link_82598,
+ .get_link_capabilities = &ixgbe_get_link_capabilities_82598,
+ .led_on = &ixgbe_led_on_generic,
+ .led_off = &ixgbe_led_off_generic,
+ .blink_led_start = &ixgbe_blink_led_start_generic,
+ .blink_led_stop = &ixgbe_blink_led_stop_generic,
+ .set_rar = &ixgbe_set_rar_generic,
+ .clear_rar = &ixgbe_clear_rar_generic,
+ .set_vmdq = &ixgbe_set_vmdq_82598,
+ .clear_vmdq = &ixgbe_clear_vmdq_82598,
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
+ .enable_mc = &ixgbe_enable_mc_generic,
+ .disable_mc = &ixgbe_disable_mc_generic,
+ .clear_vfta = &ixgbe_clear_vfta_82598,
+ .set_vfta = &ixgbe_set_vfta_82598,
+ .fc_enable = &ixgbe_fc_enable_82598,
+ .set_fw_drv_ver = NULL,
+ .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
+ .release_swfw_sync = &ixgbe_release_swfw_sync,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
+ .init_params = &ixgbe_init_eeprom_params_generic,
+ .read = &ixgbe_read_eerd_generic,
+ .read_buffer = &ixgbe_read_eerd_buffer_generic,
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .update_checksum = &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82598 = {
+ .identify = &ixgbe_identify_phy_generic,
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .init = &ixgbe_init_phy_ops_82598,
+ .reset = &ixgbe_reset_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
+ .check_overtemp = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_82598_info = {
+ .mac = ixgbe_mac_82598EB,
+ .get_invariants = &ixgbe_get_invariants_82598,
+ .mac_ops = &mac_ops_82598,
+ .eeprom_ops = &eeprom_ops_82598,
+ .phy_ops = &phy_ops_82598,
+};
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+#include "ixgbe_mbx.h"
+
+#define IXGBE_82599_MAX_TX_QUEUES 128
+#define IXGBE_82599_MAX_RX_QUEUES 128
+#define IXGBE_82599_RAR_ENTRIES 128
+#define IXGBE_82599_MC_TBL_SIZE 128
+#define IXGBE_82599_VFT_TBL_SIZE 128
+#define IXGBE_82599_RX_PB_SIZE 512
+
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
+
+static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ /* enable the laser control functions for SFP+ fiber */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
+ mac->ops.disable_tx_laser =
+ &ixgbe_disable_tx_laser_multispeed_fiber;
+ mac->ops.enable_tx_laser =
+ &ixgbe_enable_tx_laser_multispeed_fiber;
+ mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
+ } else {
+ mac->ops.disable_tx_laser = NULL;
+ mac->ops.enable_tx_laser = NULL;
+ mac->ops.flap_tx_laser = NULL;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ /* Set up dual speed SFP+ support */
+ mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
+ } else {
+ if ((mac->ops.get_media_type(hw) ==
+ ixgbe_media_type_backplane) &&
+ (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+ hw->phy.smart_speed == ixgbe_smart_speed_on) &&
+ !ixgbe_verify_lesm_fw_enabled_82599(hw))
+ mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+ else
+ mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+ }
+}
+
+static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 reg_anlp1 = 0;
+ u32 i = 0;
+ u16 list_offset, data_offset, data_value;
+
+ if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ hw->phy.ops.reset = NULL;
+
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != 0)
+ goto setup_sfp_out;
+
+ /* PHY config will finish before releasing the semaphore */
+ ret_val = hw->mac.ops.acquire_swfw_sync(hw,
+ IXGBE_GSSR_MAC_CSR_SM);
+ if (ret_val != 0) {
+ ret_val = IXGBE_ERR_SWFW_SYNC;
+ goto setup_sfp_out;
+ }
+
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ while (data_value != 0xffff) {
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
+ IXGBE_WRITE_FLUSH(hw);
+ hw->eeprom.ops.read(hw, ++data_offset, &data_value);
+ }
+
+ /* Release the semaphore */
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
+ /*
+ * Delay obtaining semaphore again to allow FW access,
+ * semaphore_delay is in ms usleep_range needs us.
+ */
+ usleep_range(hw->eeprom.semaphore_delay * 1000,
+ hw->eeprom.semaphore_delay * 2000);
+
+ /* Now restart DSP by setting Restart_AN and clearing LMS */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
+ IXGBE_AUTOC_AN_RESTART));
+
+ /* Wait for AN to leave state 0 */
+ for (i = 0; i < 10; i++) {
+ usleep_range(4000, 8000);
+ reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
+ break;
+ }
+ if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
+ hw_dbg(hw, "sfp module setup not complete\n");
+ ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
+ goto setup_sfp_out;
+ }
+
+ /* Restart DSP by setting Restart_AN and return to SFI mode */
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
+ IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
+ IXGBE_AUTOC_AN_RESTART));
+ }
+
+setup_sfp_out:
+ return ret_val;
+}
+
+static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_phy_ops_82599 - PHY/SFP specific init
+ * @hw: pointer to hardware structure
+ *
+ * Initialize any function pointers that were not able to be
+ * set during get_invariants because the PHY/SFP type was
+ * not known. Perform the SFP init if necessary.
+ *
+ **/
+static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+ struct ixgbe_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+
+ /* Identify the PHY or SFP module */
+ ret_val = phy->ops.identify(hw);
+
+ /* Setup function pointers based on detected SFP module and speeds */
+ ixgbe_init_mac_link_ops_82599(hw);
+
+ /* If copper media, overwrite with copper function pointers */
+ if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
+ mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
+ mac->ops.get_link_capabilities =
+ &ixgbe_get_copper_link_capabilities_generic;
+ }
+
+ /* Set necessary function pointers based on phy type */
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ phy->ops.check_link = &ixgbe_check_phy_link_tnx;
+ phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_tnx;
+ break;
+ case ixgbe_phy_aq:
+ phy->ops.get_firmware_version =
+ &ixgbe_get_phy_firmware_version_generic;
+ break;
+ default:
+ break;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_link_capabilities_82599 - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @negotiation: true when autoneg or autotry is enabled
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ **/
+static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *negotiation)
+{
+ s32 status = 0;
+ u32 autoc = 0;
+
+ /* Determine 1G link capabilities off of SFP+ type */
+ if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ goto out;
+ }
+
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_1G_AN:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ *negotiation = false;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ break;
+
+ case IXGBE_AUTOC_LMS_SGMII_1G_100M:
+ *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
+ *negotiation = false;
+ break;
+
+ default:
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ break;
+ }
+
+ if (hw->phy.multispeed_fiber) {
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL |
+ IXGBE_LINK_SPEED_1GB_FULL;
+ *negotiation = true;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_media_type_82599 - Get media type
+ * @hw: pointer to hardware structure
+ *
+ * Returns the media type (fiber, copper, backplane)
+ **/
+static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
+{
+ enum ixgbe_media_type media_type;
+
+ /* Detect if there is a copper PHY attached. */
+ switch (hw->phy.type) {
+ case ixgbe_phy_cu_unknown:
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ media_type = ixgbe_media_type_copper;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_KX4:
+ case IXGBE_DEV_ID_82599_KX4_MEZZ:
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ case IXGBE_DEV_ID_82599_KR:
+ case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
+ case IXGBE_DEV_ID_82599_XAUI_LOM:
+ /* Default device ID is mezzanine card KX/KX4 */
+ media_type = ixgbe_media_type_backplane;
+ break;
+ case IXGBE_DEV_ID_82599_SFP:
+ case IXGBE_DEV_ID_82599_SFP_FCOE:
+ case IXGBE_DEV_ID_82599_SFP_EM:
+ case IXGBE_DEV_ID_82599_SFP_SF2:
+ media_type = ixgbe_media_type_fiber;
+ break;
+ case IXGBE_DEV_ID_82599_CX4:
+ media_type = ixgbe_media_type_cx4;
+ break;
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ media_type = ixgbe_media_type_copper;
+ break;
+ case IXGBE_DEV_ID_82599_LS:
+ media_type = ixgbe_media_type_fiber_lco;
+ break;
+ default:
+ media_type = ixgbe_media_type_unknown;
+ break;
+ }
+out:
+ return media_type;
+}
+
+/**
+ * ixgbe_start_mac_link_82599 - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Configures link settings based on values in the ixgbe_hw struct.
+ * Restarts the link. Performs autonegotiation if needed.
+ **/
+static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
+ bool autoneg_wait_to_complete)
+{
+ u32 autoc_reg;
+ u32 links_reg;
+ u32 i;
+ s32 status = 0;
+
+ /* Restart link */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
+ IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /* Just in case Autoneg time = 0 */
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autoneg did not complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+
+ return status;
+}
+
+/**
+ * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively shutting down the Tx
+ * laser on the PHY, effectively halting physical link.
+ **/
+static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Disable tx laser; allow 100us to go dark per spec */
+ esdp_reg |= IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(100);
+}
+
+/**
+ * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * The base drivers may require better control over SFP+ module
+ * PHY states. This includes selectively turning on the Tx
+ * laser on the PHY, effectively starting physical link.
+ **/
+static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+ /* Enable tx laser; allow 100ms to light up */
+ esdp_reg &= ~IXGBE_ESDP_SDP3;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ msleep(100);
+}
+
+/**
+ * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
+ * @hw: pointer to hardware structure
+ *
+ * When the driver changes the link speeds that it can support,
+ * it sets autotry_restart to true to indicate that we need to
+ * initiate a new autotry session with the link partner. To do
+ * so, we set the speed then disable and re-enable the tx laser, to
+ * alert the link partner that it also needs to restart autotry on its
+ * end. This is consistent with true clause 37 autoneg, which also
+ * involves a loss of signal.
+ **/
+static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
+{
+ if (hw->mac.autotry_restart) {
+ ixgbe_disable_tx_laser_multispeed_fiber(hw);
+ ixgbe_enable_tx_laser_multispeed_fiber(hw);
+ hw->mac.autotry_restart = false;
+ }
+}
+
+/**
+ * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ u32 speedcnt = 0;
+ u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ u32 i = 0;
+ bool link_up = false;
+ bool negotiation;
+
+ /* Mask off requested but non-supported speeds */
+ status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
+ &negotiation);
+ if (status != 0)
+ return status;
+
+ speed &= link_speed;
+
+ /*
+ * Try each speed one by one, highest priority first. We do this in
+ * software because 10gb fiber doesn't support speed autonegotiation.
+ */
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ speedcnt++;
+ highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
+
+ if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
+ goto out;
+
+ /* Set the module link speed */
+ esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Allow module to change analog characteristics (1G->10G) */
+ msleep(40);
+
+ status = ixgbe_setup_mac_link_82599(hw,
+ IXGBE_LINK_SPEED_10GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
+ if (status != 0)
+ return status;
+
+ /* Flap the tx laser if it has not already been done */
+ hw->mac.ops.flap_tx_laser(hw);
+
+ /*
+ * Wait for the controller to acquire link. Per IEEE 802.3ap,
+ * Section 73.10.2, we may have to wait up to 500ms if KR is
+ * attempted. 82599 uses the same timing for 10g SFI.
+ */
+ for (i = 0; i < 5; i++) {
+ /* Wait for the link partner to also set speed */
+ msleep(100);
+
+ /* If we have link, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ return status;
+
+ if (link_up)
+ goto out;
+ }
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ speedcnt++;
+ if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
+ highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ /* If we already have link at this speed, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
+
+ if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
+ goto out;
+
+ /* Set the module link speed */
+ esdp_reg &= ~IXGBE_ESDP_SDP5;
+ esdp_reg |= IXGBE_ESDP_SDP5_DIR;
+ IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Allow module to change analog characteristics (10G->1G) */
+ msleep(40);
+
+ status = ixgbe_setup_mac_link_82599(hw,
+ IXGBE_LINK_SPEED_1GB_FULL,
+ autoneg,
+ autoneg_wait_to_complete);
+ if (status != 0)
+ return status;
+
+ /* Flap the tx laser if it has not already been done */
+ hw->mac.ops.flap_tx_laser(hw);
+
+ /* Wait for the link partner to also set speed */
+ msleep(100);
+
+ /* If we have link, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
+ false);
+ if (status != 0)
+ return status;
+
+ if (link_up)
+ goto out;
+ }
+
+ /*
+ * We didn't get link. Configure back to the highest speed we tried,
+ * (if there was more than one). We call ourselves back with just the
+ * single highest speed that the user requested.
+ */
+ if (speedcnt > 1)
+ status = ixgbe_setup_mac_link_multispeed_fiber(hw,
+ highest_link_speed,
+ autoneg,
+ autoneg_wait_to_complete);
+
+out:
+ /* Set autoneg_advertised value based on input link speed */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Implements the Intel SmartSpeed algorithm.
+ **/
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
+ s32 i, j;
+ bool link_up = false;
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ /* Set autoneg_advertised value based on input link speed */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ /*
+ * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the
+ * autoneg advertisement if link is unable to be established at the
+ * highest negotiated rate. This can sometimes happen due to integrity
+ * issues with the physical media connection.
+ */
+
+ /* First, try to get link with full advertisement */
+ hw->phy.smart_speed_active = false;
+ for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+ status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ if (status != 0)
+ goto out;
+
+ /*
+ * Wait for the controller to acquire link. Per IEEE 802.3ap,
+ * Section 73.10.2, we may have to wait up to 500ms if KR is
+ * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+ * Table 9 in the AN MAS.
+ */
+ for (i = 0; i < 5; i++) {
+ mdelay(100);
+
+ /* If we have link, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+ }
+
+ /*
+ * We didn't get link. If we advertised KR plus one of KX4/KX
+ * (or BX4/BX), then disable KR and try again.
+ */
+ if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+ ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+ goto out;
+
+ /* Turn SmartSpeed on to disable KR support */
+ hw->phy.smart_speed_active = true;
+ status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ if (status != 0)
+ goto out;
+
+ /*
+ * Wait for the controller to acquire link. 600ms will allow for
+ * the AN link_fail_inhibit_timer as well for multiple cycles of
+ * parallel detect, both 10g and 1g. This allows for the maximum
+ * connect attempts as defined in the AN MAS table 73-7.
+ */
+ for (i = 0; i < 6; i++) {
+ mdelay(100);
+
+ /* If we have link, just jump out */
+ status = hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false);
+ if (status != 0)
+ goto out;
+
+ if (link_up)
+ goto out;
+ }
+
+ /* We didn't get link. Turn SmartSpeed back off. */
+ hw->phy.smart_speed_active = false;
+ status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+
+out:
+ if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
+ hw_dbg(hw, "Smartspeed has downgraded the link speed from "
+ "the maximum advertised\n");
+ return status;
+}
+
+/**
+ * ixgbe_setup_mac_link_82599 - Set MAC link speed
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Set the link speed in the AUTOC register and restarts link.
+ **/
+static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status = 0;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 start_autoc = autoc;
+ u32 orig_autoc = 0;
+ u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 links_reg;
+ u32 i;
+ ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
+
+ /* Check to see if speed passed in is supported. */
+ hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
+ if (status != 0)
+ goto out;
+
+ speed &= link_capabilities;
+
+ if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
+ status = IXGBE_ERR_LINK_SETUP;
+ goto out;
+ }
+
+ /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+ if (hw->mac.orig_link_settings_stored)
+ orig_autoc = hw->mac.orig_autoc;
+ else
+ orig_autoc = autoc;
+
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ /* Set KX4/KX/KR support according to speed requested */
+ autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ autoc |= IXGBE_AUTOC_KX4_SUPP;
+ if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+ (hw->phy.smart_speed_active == false))
+ autoc |= IXGBE_AUTOC_KR_SUPP;
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ autoc |= IXGBE_AUTOC_KX_SUPP;
+ } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
+ link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
+ /* Switch from 1G SFI to 10G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+ (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
+ }
+ } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
+ (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
+ /* Switch from 10G SFI to 1G SFI if requested */
+ if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
+ (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
+ autoc &= ~IXGBE_AUTOC_LMS_MASK;
+ if (autoneg)
+ autoc |= IXGBE_AUTOC_LMS_1G_AN;
+ else
+ autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+ }
+ }
+
+ if (autoc != start_autoc) {
+ /* Restart link */
+ autoc |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+
+ /* Only poll for autoneg to complete if specified to do so */
+ if (autoneg_wait_to_complete) {
+ if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
+ link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
+ links_reg = 0; /*Just in case Autoneg time=0*/
+ for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+ links_reg =
+ IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+ break;
+ msleep(100);
+ }
+ if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+ status =
+ IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+ hw_dbg(hw, "Autoneg did not "
+ "complete.\n");
+ }
+ }
+ }
+
+ /* Add delay to filter out noises during initial link setup */
+ msleep(50);
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true if waiting is needed to complete
+ *
+ * Restarts link on PHY and MAC based on settings passed in.
+ **/
+static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ s32 status;
+
+ /* Setup the PHY according to input speed */
+ status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+ /* Set up MAC */
+ ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_hw_82599 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 ctrl;
+ u32 i;
+ u32 autoc;
+ u32 autoc2;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /* PHY ops must be identified and initialized prior to reset */
+
+ /* Identify PHY and related function pointers */
+ status = hw->phy.ops.init(hw);
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+ /* Setup SFP module if there is one present. */
+ if (hw->phy.sfp_setup_needed) {
+ status = hw->mac.ops.setup_sfp(hw);
+ hw->phy.sfp_setup_needed = false;
+ }
+
+ if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto reset_hw_out;
+
+ /* Reset PHY */
+ if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
+ hw->phy.ops.reset(hw);
+
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests before reset
+ */
+ ixgbe_disable_pcie_master(hw);
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. This needs to be a SW reset.
+ * If link reset is used, it might reset the MAC when mng is using it
+ */
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & IXGBE_CTRL_RST))
+ break;
+ }
+ if (ctrl & IXGBE_CTRL_RST) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete. We use 1usec since that is
+ * what is needed for ixgbe_disable_pcie_master(). The second reset
+ * then clears out any effects of those events.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ udelay(1);
+ goto mac_reset_top;
+ }
+
+ msleep(50);
+
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_autoc2 = autoc2;
+ hw->mac.orig_link_settings_stored = true;
+ } else {
+ if (autoc != hw->mac.orig_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+ IXGBE_AUTOC_AN_RESTART));
+
+ if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+ (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+ autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+ autoc2 |= (hw->mac.orig_autoc2 &
+ IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ }
+ }
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = 128;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+ /* Store the alternative WWNN/WWPN prefix */
+ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+ &hw->mac.wwpn_prefix);
+
+reset_hw_out:
+ return status;
+}
+
+/**
+ * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
+{
+ int i;
+ u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
+ fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
+
+ /*
+ * Before starting reinitialization process,
+ * FDIRCMD.CMD must be zero.
+ */
+ for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ IXGBE_FDIRCMD_CMD_MASK))
+ break;
+ udelay(10);
+ }
+ if (i >= IXGBE_FDIRCMD_CMD_POLL) {
+ hw_dbg(hw, "Flow Director previous command isn't complete, "
+ "aborting table re-initialization.\n");
+ return IXGBE_ERR_FDIR_REINIT_FAILED;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
+ IXGBE_WRITE_FLUSH(hw);
+ /*
+ * 82599 adapters flow director init flow cannot be restarted,
+ * Workaround 82599 silicon errata by performing the following steps
+ * before re-writing the FDIRCTRL control register with the same value.
+ * - write 1 to bit 8 of FDIRCMD register &
+ * - write 0 to bit 8 of FDIRCMD register
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+ IXGBE_FDIRCMD_CLEARHT));
+ IXGBE_WRITE_FLUSH(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+ ~IXGBE_FDIRCMD_CLEARHT));
+ IXGBE_WRITE_FLUSH(hw);
+ /*
+ * Clear FDIR Hash register to clear any leftover hashes
+ * waiting to be programmed.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
+ IXGBE_WRITE_FLUSH(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll init-done after we write FDIRCTRL register */
+ for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+ IXGBE_FDIRCTRL_INIT_DONE)
+ break;
+ udelay(10);
+ }
+ if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+ hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
+ return IXGBE_ERR_FDIR_REINIT_FAILED;
+ }
+
+ /* Clear FDIR statistics registers (read to clear) */
+ IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+ IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+ IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_fdir_rxpba_82599 - Initialize Flow Director Rx packet buffer
+ * @hw: pointer to hardware structure
+ * @pballoc: which mode to allocate filters with
+ **/
+static s32 ixgbe_set_fdir_rxpba_82599(struct ixgbe_hw *hw, const u32 pballoc)
+{
+ u32 fdir_pbsize = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
+ u32 current_rxpbsize = 0;
+ int i;
+
+ /* reserve space for Flow Director filters */
+ switch (pballoc) {
+ case IXGBE_FDIR_PBALLOC_256K:
+ fdir_pbsize -= 256 << IXGBE_RXPBSIZE_SHIFT;
+ break;
+ case IXGBE_FDIR_PBALLOC_128K:
+ fdir_pbsize -= 128 << IXGBE_RXPBSIZE_SHIFT;
+ break;
+ case IXGBE_FDIR_PBALLOC_64K:
+ fdir_pbsize -= 64 << IXGBE_RXPBSIZE_SHIFT;
+ break;
+ case IXGBE_FDIR_PBALLOC_NONE:
+ default:
+ return IXGBE_ERR_PARAM;
+ }
+
+ /* determine current RX packet buffer size */
+ for (i = 0; i < 8; i++)
+ current_rxpbsize += IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+
+ /* if there is already room for the filters do nothing */
+ if (current_rxpbsize <= fdir_pbsize)
+ return 0;
+
+ if (current_rxpbsize > hw->mac.rx_pb_size) {
+ /*
+ * if rxpbsize is greater than max then HW max the Rx buffer
+ * sizes are unconfigured or misconfigured since HW default is
+ * to give the full buffer to each traffic class resulting in
+ * the total size being buffer size 8x actual size
+ *
+ * This assumes no DCB since the RXPBSIZE registers appear to
+ * be unconfigured.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), fdir_pbsize);
+ for (i = 1; i < 8; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+ } else {
+ /*
+ * Since the Rx packet buffer appears to have already been
+ * configured we need to shrink each packet buffer by enough
+ * to make room for the filters. As such we take each rxpbsize
+ * value and multiply it by a fraction representing the size
+ * needed over the size we currently have.
+ *
+ * We need to reduce fdir_pbsize and current_rxpbsize to
+ * 1/1024 of their original values in order to avoid
+ * overflowing the u32 being used to store rxpbsize.
+ */
+ fdir_pbsize >>= IXGBE_RXPBSIZE_SHIFT;
+ current_rxpbsize >>= IXGBE_RXPBSIZE_SHIFT;
+ for (i = 0; i < 8; i++) {
+ u32 rxpbsize = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+ rxpbsize *= fdir_pbsize;
+ rxpbsize /= current_rxpbsize;
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpbsize);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register
+ **/
+static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+ int i;
+
+ /* Prime the keys for hashing */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
+
+ /*
+ * Poll init-done after we write the register. Estimated times:
+ * 10G: PBALLOC = 11b, timing is 60us
+ * 1G: PBALLOC = 11b, timing is 600us
+ * 100M: PBALLOC = 11b, timing is 6ms
+ *
+ * Multiple these timings by 4 if under full Rx load
+ *
+ * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
+ * 1 msec per poll time. If we're at line rate and drop to 100M, then
+ * this might not finish in our poll time, but we can live with that
+ * for now.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
+ IXGBE_WRITE_FLUSH(hw);
+ for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
+ if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
+ IXGBE_FDIRCTRL_INIT_DONE)
+ break;
+ usleep_range(1000, 2000);
+ }
+
+ if (i >= IXGBE_FDIR_INIT_DONE_POLL)
+ hw_dbg(hw, "Flow Director poll time exceeded!\n");
+}
+
+/**
+ * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+ s32 err;
+
+ /* Before enabling Flow Director, verify the Rx Packet Buffer size */
+ err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
+ if (err)
+ return err;
+
+ /*
+ * Continue setup of fdirctrl register bits:
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 filters are left
+ */
+ fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
+ * @hw: pointer to hardware structure
+ * @fdirctrl: value to write to flow director control register, initially
+ * contains just the value of the Rx packet buffer allocation
+ **/
+s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
+{
+ s32 err;
+
+ /* Before enabling Flow Director, verify the Rx Packet Buffer size */
+ err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
+ if (err)
+ return err;
+
+ /*
+ * Continue setup of fdirctrl register bits:
+ * Turn perfect match filtering on
+ * Report hash in RSS field of Rx wb descriptor
+ * Initialize the drop queue
+ * Move the flexible bytes to use the ethertype - shift 6 words
+ * Set the maximum length per hash bucket to 0xA filters
+ * Send interrupt when 64 (0x4 * 16) filters are left
+ */
+ fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
+ IXGBE_FDIRCTRL_REPORT_STATUS |
+ (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
+ (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
+ (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
+ (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
+
+ /* write hashes and fdirctrl register, poll for completion */
+ ixgbe_fdir_enable_82599(hw, fdirctrl);
+
+ return 0;
+}
+
+/*
+ * These defines allow us to quickly generate all of the necessary instructions
+ * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
+ * for values 0 through 15
+ */
+#define IXGBE_ATR_COMMON_HASH_KEY \
+ (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
+#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
+ common_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
+ sig_hash ^= lo_hash_dword << (16 - n); \
+ if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
+ common_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+ else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
+ sig_hash ^= hi_hash_dword << (16 - n); \
+} while (0);
+
+/**
+ * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
+ * @stream: input bitstream to compute the hash on
+ *
+ * This function is almost identical to the function above but contains
+ * several optomizations such as unwinding all of the loops, letting the
+ * compiler work out all of the conditional ifs since the keys are static
+ * defines, and computing two keys at once since the hashed dword stream
+ * will be the same for both keys.
+ **/
+static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common)
+{
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
+
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = ntohl(input.dword);
+
+ /* generate common hash dword */
+ hi_hash_dword = ntohl(common.dword);
+
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
+
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the vlan until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
+ IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
+
+ /* combine common_hash result with signature and bucket hashes */
+ bucket_hash ^= common_hash;
+ bucket_hash &= IXGBE_ATR_HASH_MASK;
+
+ sig_hash ^= common_hash << 16;
+ sig_hash &= IXGBE_ATR_HASH_MASK << 16;
+
+ /* return completed signature hash */
+ return sig_hash ^ bucket_hash;
+}
+
+/**
+ * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
+ * @hw: pointer to hardware structure
+ * @input: unique input dword
+ * @common: compressed common input dword
+ * @queue: queue index to direct traffic to
+ **/
+s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_hash_dword input,
+ union ixgbe_atr_hash_dword common,
+ u8 queue)
+{
+ u64 fdirhashcmd;
+ u32 fdircmd;
+
+ /*
+ * Get the flow_type in order to program FDIRCMD properly
+ * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
+ */
+ switch (input.formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ case IXGBE_ATR_FLOW_TYPE_TCPV6:
+ case IXGBE_ATR_FLOW_TYPE_UDPV6:
+ case IXGBE_ATR_FLOW_TYPE_SCTPV6:
+ break;
+ default:
+ hw_dbg(hw, " Error on flow type input\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+
+ /*
+ * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
+ * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
+ */
+ fdirhashcmd = (u64)fdircmd << 32;
+ fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
+ IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
+
+ hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
+
+ return 0;
+}
+
+#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
+do { \
+ u32 n = (_n); \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
+ bucket_hash ^= lo_hash_dword >> n; \
+ if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
+ bucket_hash ^= hi_hash_dword >> n; \
+} while (0);
+
+/**
+ * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
+ * @atr_input: input bitstream to compute the hash on
+ * @input_mask: mask for the input bitstream
+ *
+ * This function serves two main purposes. First it applys the input_mask
+ * to the atr_input resulting in a cleaned up atr_input data stream.
+ * Secondly it computes the hash and stores it in the bkt_hash field at
+ * the end of the input byte stream. This way it will be available for
+ * future use without needing to recompute the hash.
+ **/
+void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
+ union ixgbe_atr_input *input_mask)
+{
+
+ u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
+ u32 bucket_hash = 0;
+
+ /* Apply masks to input data */
+ input->dword_stream[0] &= input_mask->dword_stream[0];
+ input->dword_stream[1] &= input_mask->dword_stream[1];
+ input->dword_stream[2] &= input_mask->dword_stream[2];
+ input->dword_stream[3] &= input_mask->dword_stream[3];
+ input->dword_stream[4] &= input_mask->dword_stream[4];
+ input->dword_stream[5] &= input_mask->dword_stream[5];
+ input->dword_stream[6] &= input_mask->dword_stream[6];
+ input->dword_stream[7] &= input_mask->dword_stream[7];
+ input->dword_stream[8] &= input_mask->dword_stream[8];
+ input->dword_stream[9] &= input_mask->dword_stream[9];
+ input->dword_stream[10] &= input_mask->dword_stream[10];
+
+ /* record the flow_vm_vlan bits as they are a key part to the hash */
+ flow_vm_vlan = ntohl(input->dword_stream[0]);
+
+ /* generate common hash dword */
+ hi_hash_dword = ntohl(input->dword_stream[1] ^
+ input->dword_stream[2] ^
+ input->dword_stream[3] ^
+ input->dword_stream[4] ^
+ input->dword_stream[5] ^
+ input->dword_stream[6] ^
+ input->dword_stream[7] ^
+ input->dword_stream[8] ^
+ input->dword_stream[9] ^
+ input->dword_stream[10]);
+
+ /* low dword is word swapped version of common */
+ lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
+
+ /* apply flow ID/VM pool/VLAN ID bits to hash words */
+ hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
+
+ /* Process bits 0 and 16 */
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
+
+ /*
+ * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
+ * delay this because bit 0 of the stream should not be processed
+ * so we do not add the vlan until after bit 0 was processed
+ */
+ lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
+
+ /* Process remaining 30 bit of the key */
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
+ IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
+
+ /*
+ * Limit hash to 13 bits since max bucket count is 8K.
+ * Store result at the end of the input stream.
+ */
+ input->formatted.bkt_hash = bucket_hash & 0x1FFF;
+}
+
+/**
+ * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
+ * @input_mask: mask to be bit swapped
+ *
+ * The source and destination port masks for flow director are bit swapped
+ * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
+ * generate a correctly swapped value we need to bit swap the mask and that
+ * is what is accomplished by this function.
+ **/
+static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
+{
+ u32 mask = ntohs(input_mask->formatted.dst_port);
+ mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
+ mask |= ntohs(input_mask->formatted.src_port);
+ mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
+ mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
+ mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
+ return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
+}
+
+/*
+ * These two macros are meant to address the fact that we have registers
+ * that are either all or in part big-endian. As a result on big-endian
+ * systems we will end up byte swapping the value to little-endian before
+ * it is byte swapped again and written to the hardware in the original
+ * big-endian format.
+ */
+#define IXGBE_STORE_AS_BE32(_value) \
+ (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
+ (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
+
+#define IXGBE_WRITE_REG_BE32(a, reg, value) \
+ IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
+
+#define IXGBE_STORE_AS_BE16(_value) \
+ ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8))
+
+s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input_mask)
+{
+ /* mask IPv6 since it is currently not supported */
+ u32 fdirm = IXGBE_FDIRM_DIPv6;
+ u32 fdirtcpm;
+
+ /*
+ * Program the relevant mask registers. If src/dst_port or src/dst_addr
+ * are zero, then assume a full mask for that field. Also assume that
+ * a VLAN of 0 is unspecified, so mask that out as well. L4type
+ * cannot be masked out in this implementation.
+ *
+ * This also assumes IPv4 only. IPv6 masking isn't supported at this
+ * point in time.
+ */
+
+ /* verify bucket hash is cleared on hash generation */
+ if (input_mask->formatted.bkt_hash)
+ hw_dbg(hw, " bucket hash should always be 0 in mask\n");
+
+ /* Program FDIRM and verify partial masks */
+ switch (input_mask->formatted.vm_pool & 0x7F) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_POOL;
+ case 0x7F:
+ break;
+ default:
+ hw_dbg(hw, " Error on vm pool mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
+ case 0x0:
+ fdirm |= IXGBE_FDIRM_L4P;
+ if (input_mask->formatted.dst_port ||
+ input_mask->formatted.src_port) {
+ hw_dbg(hw, " Error on src/dst port mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+ case IXGBE_ATR_L4TYPE_MASK:
+ break;
+ default:
+ hw_dbg(hw, " Error on flow type mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
+ case 0x0000:
+ /* mask VLAN ID, fall through to mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0x0FFF:
+ /* mask VLAN priority */
+ fdirm |= IXGBE_FDIRM_VLANP;
+ break;
+ case 0xE000:
+ /* mask VLAN ID only, fall through */
+ fdirm |= IXGBE_FDIRM_VLANID;
+ case 0xEFFF:
+ /* no VLAN fields masked */
+ break;
+ default:
+ hw_dbg(hw, " Error on VLAN mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ switch (input_mask->formatted.flex_bytes & 0xFFFF) {
+ case 0x0000:
+ /* Mask Flex Bytes, fall through */
+ fdirm |= IXGBE_FDIRM_FLEX;
+ case 0xFFFF:
+ break;
+ default:
+ hw_dbg(hw, " Error on flexible byte mask\n");
+ return IXGBE_ERR_CONFIG;
+ }
+
+ /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
+
+ /* store the TCP/UDP port masks, bit reversed from port layout */
+ fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
+
+ /* write both the same so that UDP and TCP use the same mask */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
+
+ /* store source and destination IP masks (big-enian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
+ ~input_mask->formatted.src_ip[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
+ ~input_mask->formatted.dst_ip[0]);
+
+ return 0;
+}
+
+s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id, u8 queue)
+{
+ u32 fdirport, fdirvlan, fdirhash, fdircmd;
+
+ /* currently IPv6 is not supported, must be programmed with 0 */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
+ input->formatted.src_ip[0]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
+ input->formatted.src_ip[1]);
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
+ input->formatted.src_ip[2]);
+
+ /* record the source address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
+
+ /* record the first 32 bits of the destination address (big-endian) */
+ IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
+
+ /* record source and destination port (little-endian)*/
+ fdirport = ntohs(input->formatted.dst_port);
+ fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
+ fdirport |= ntohs(input->formatted.src_port);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
+
+ /* record vlan (little-endian) and flex_bytes(big-endian) */
+ fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
+ fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
+ fdirvlan |= ntohs(input->formatted.vlan_id);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
+
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+ /*
+ * flush all previous writes to make certain registers are
+ * programmed prior to issuing the command
+ */
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* configure FDIRCMD register */
+ fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
+ IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
+ if (queue == IXGBE_FDIR_DROP_QUEUE)
+ fdircmd |= IXGBE_FDIRCMD_DROP;
+ fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
+ fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
+ fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
+
+ return 0;
+}
+
+s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
+ union ixgbe_atr_input *input,
+ u16 soft_id)
+{
+ u32 fdirhash;
+ u32 fdircmd = 0;
+ u32 retry_count;
+ s32 err = 0;
+
+ /* configure FDIRHASH register */
+ fdirhash = input->formatted.bkt_hash;
+ fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+
+ /* flush hash to HW */
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Query if filter is present */
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
+
+ for (retry_count = 10; retry_count; retry_count--) {
+ /* allow 10us for query to process */
+ udelay(10);
+ /* verify query completed successfully */
+ fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
+ if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
+ break;
+ }
+
+ if (!retry_count)
+ err = IXGBE_ERR_FDIR_REINIT_FAILED;
+
+ /* if filter exists in hardware then remove it */
+ if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
+ IXGBE_WRITE_FLUSH(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+ IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
+ }
+
+ return err;
+}
+
+/**
+ * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: analog register to read
+ * @val: read value
+ *
+ * Performs read operation to Omer analog register specified.
+ **/
+static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
+{
+ u32 core_ctl;
+
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
+ (reg << 8));
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+ core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
+ *val = (u8)core_ctl;
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
+ * @hw: pointer to hardware structure
+ * @reg: atlas register to write
+ * @val: value to write
+ *
+ * Performs write operation to Omer analog register specified.
+ **/
+static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
+{
+ u32 core_ctl;
+
+ core_ctl = (reg << 8) | val;
+ IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(10);
+
+ return 0;
+}
+
+/**
+ * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+ if (ret_val != 0)
+ goto out;
+
+ /* We need to run link autotry after the driver loads */
+ hw->mac.autotry_restart = true;
+ hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
+
+ if (ret_val == 0)
+ ret_val = ixgbe_verify_fw_version_82599(hw);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_identify_phy_82599 - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ * If PHY already detected, maintains current PHY type in hw struct,
+ * otherwise executes the PHY detection routine.
+ **/
+static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+
+ /* Detect PHY if not unknown - returns success if already detected. */
+ status = ixgbe_identify_phy_generic(hw);
+ if (status != 0) {
+ /* 82599 10GBASE-T requires an external PHY */
+ if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
+ goto out;
+ else
+ status = ixgbe_identify_sfp_module_generic(hw);
+ }
+
+ /* Set PHY type none if no PHY detected */
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.type = ixgbe_phy_none;
+ status = 0;
+ }
+
+ /* Return error if SFP module has been detected but is not supported */
+ if (hw->phy.type == ixgbe_phy_sfp_unsupported)
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
+ u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
+ u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
+ u16 ext_ability = 0;
+ u8 comp_codes_10g = 0;
+ u8 comp_codes_1g = 0;
+
+ hw->phy.ops.identify(hw);
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ case ixgbe_phy_cu_unknown:
+ hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+ &ext_ability);
+ if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+ goto out;
+ default:
+ break;
+ }
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
+ case IXGBE_AUTOC_LMS_1G_AN:
+ case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+ if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
+ IXGBE_PHYSICAL_LAYER_1000BASE_BX;
+ goto out;
+ } else
+ /* SFI mode so read SFP module */
+ goto sfp_check;
+ break;
+ case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+ if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
+ else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
+ goto out;
+ break;
+ case IXGBE_AUTOC_LMS_10G_SERIAL:
+ if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+ goto out;
+ } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
+ goto sfp_check;
+ break;
+ case IXGBE_AUTOC_LMS_KX4_KX_KR:
+ case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
+ goto out;
+ break;
+ default:
+ goto out;
+ break;
+ }
+
+sfp_check:
+ /* SFP check must be done last since DA modules are sometimes used to
+ * test KR mode - we need to id KR mode correctly before SFP module.
+ * Call identify_sfp because the pluggable module may have changed */
+ hw->phy.ops.identify_sfp(hw);
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ goto out;
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_sfp_active_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+ break;
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ break;
+ default:
+ break;
+ }
+
+out:
+ return physical_layer;
+}
+
+/**
+ * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit for 82599
+ **/
+static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
+{
+#define IXGBE_MAX_SECRX_POLL 30
+ int i;
+ int secrxreg;
+
+ /*
+ * Workaround for 82599 silicon errata when enabling the Rx datapath.
+ * If traffic is incoming before we enable the Rx unit, it could hang
+ * the Rx DMA unit. Therefore, make sure the security engine is
+ * completely disabled prior to enabling the Rx unit.
+ */
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
+ if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
+ break;
+ else
+ /* Use interrupt-safe sleep just in case */
+ udelay(10);
+ }
+
+ /* For informational purposes only */
+ if (i >= IXGBE_MAX_SECRX_POLL)
+ hw_dbg(hw, "Rx unit being enabled before security "
+ "path fully disabled. Continuing with init.\n");
+
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+ secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
+ secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_verify_fw_version_82599 - verify fw version for 82599
+ * @hw: pointer to hardware structure
+ *
+ * Verifies that installed the firmware version is 0.6 or higher
+ * for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
+ *
+ * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
+ * if the FW version is not supported.
+ **/
+static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM_VERSION;
+ u16 fw_offset, fw_ptp_cfg_offset;
+ u16 fw_version = 0;
+
+ /* firmware check is only necessary for SFI devices */
+ if (hw->phy.media_type != ixgbe_media_type_fiber) {
+ status = 0;
+ goto fw_version_out;
+ }
+
+ /* get the offset to the Firmware Module block */
+ hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+ if ((fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the offset to the Pass Through Patch Configuration block */
+ hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
+ &fw_ptp_cfg_offset);
+
+ if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
+ goto fw_version_out;
+
+ /* get the firmware version */
+ hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
+ IXGBE_FW_PATCH_VERSION_4),
+ &fw_version);
+
+ if (fw_version > 0x5)
+ status = 0;
+
+fw_version_out:
+ return status;
+}
+
+/**
+ * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
+ * @hw: pointer to hardware structure
+ *
+ * Returns true if the LESM FW module is present and enabled. Otherwise
+ * returns false. Smart Speed must be disabled if LESM FW module is enabled.
+ **/
+static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
+{
+ bool lesm_enabled = false;
+ u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
+ s32 status;
+
+ /* get the offset to the Firmware Module block */
+ status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
+
+ if ((status != 0) ||
+ (fw_offset == 0) || (fw_offset == 0xFFFF))
+ goto out;
+
+ /* get the offset to the LESM Parameters block */
+ status = hw->eeprom.ops.read(hw, (fw_offset +
+ IXGBE_FW_LESM_PARAMETERS_PTR),
+ &fw_lesm_param_offset);
+
+ if ((status != 0) ||
+ (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
+ goto out;
+
+ /* get the lesm state word */
+ status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
+ IXGBE_FW_LESM_STATE_1),
+ &fw_lesm_state);
+
+ if ((status == 0) &&
+ (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
+ lesm_enabled = true;
+
+out:
+ return lesm_enabled;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Retrieves 16 bit word(s) read from EEPROM
+ **/
+static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
+ data);
+ else
+ ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
+ words,
+ data);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_read_eeprom_82599 - Read EEPROM word using
+ * fastest available method
+ *
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM
+ **/
+static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
+ u16 offset, u16 *data)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ s32 ret_val = IXGBE_ERR_CONFIG;
+
+ /*
+ * If EEPROM is detected and can be addressed using 14 bits,
+ * use EERD otherwise use bit bang
+ */
+ if ((eeprom->type == ixgbe_eeprom_spi) &&
+ (offset <= IXGBE_EERD_MAX_ADDR))
+ ret_val = ixgbe_read_eerd_generic(hw, offset, data);
+ else
+ ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
+
+ return ret_val;
+}
+
+static struct ixgbe_mac_operations mac_ops_82599 = {
+ .init_hw = &ixgbe_init_hw_generic,
+ .reset_hw = &ixgbe_reset_hw_82599,
+ .start_hw = &ixgbe_start_hw_82599,
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
+ .get_media_type = &ixgbe_get_media_type_82599,
+ .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
+ .enable_rx_dma = &ixgbe_enable_rx_dma_82599,
+ .get_mac_addr = &ixgbe_get_mac_addr_generic,
+ .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
+ .get_device_caps = &ixgbe_get_device_caps_generic,
+ .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
+ .stop_adapter = &ixgbe_stop_adapter_generic,
+ .get_bus_info = &ixgbe_get_bus_info_generic,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
+ .read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
+ .write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
+ .setup_link = &ixgbe_setup_mac_link_82599,
+ .set_rxpba = &ixgbe_set_rxpba_generic,
+ .check_link = &ixgbe_check_mac_link_generic,
+ .get_link_capabilities = &ixgbe_get_link_capabilities_82599,
+ .led_on = &ixgbe_led_on_generic,
+ .led_off = &ixgbe_led_off_generic,
+ .blink_led_start = &ixgbe_blink_led_start_generic,
+ .blink_led_stop = &ixgbe_blink_led_stop_generic,
+ .set_rar = &ixgbe_set_rar_generic,
+ .clear_rar = &ixgbe_clear_rar_generic,
+ .set_vmdq = &ixgbe_set_vmdq_generic,
+ .clear_vmdq = &ixgbe_clear_vmdq_generic,
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
+ .enable_mc = &ixgbe_enable_mc_generic,
+ .disable_mc = &ixgbe_disable_mc_generic,
+ .clear_vfta = &ixgbe_clear_vfta_generic,
+ .set_vfta = &ixgbe_set_vfta_generic,
+ .fc_enable = &ixgbe_fc_enable_generic,
+ .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
+ .init_uta_tables = &ixgbe_init_uta_tables_generic,
+ .setup_sfp = &ixgbe_setup_sfp_modules_82599,
+ .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
+ .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+ .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
+ .release_swfw_sync = &ixgbe_release_swfw_sync,
+
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
+ .init_params = &ixgbe_init_eeprom_params_generic,
+ .read = &ixgbe_read_eeprom_82599,
+ .read_buffer = &ixgbe_read_eeprom_buffer_82599,
+ .write = &ixgbe_write_eeprom_generic,
+ .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
+ .update_checksum = &ixgbe_update_eeprom_checksum_generic,
+};
+
+static struct ixgbe_phy_operations phy_ops_82599 = {
+ .identify = &ixgbe_identify_phy_82599,
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .init = &ixgbe_init_phy_ops_82599,
+ .reset = &ixgbe_reset_phy_generic,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
+ .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
+ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
+ .check_overtemp = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_82599_info = {
+ .mac = ixgbe_mac_82599EB,
+ .get_invariants = &ixgbe_get_invariants_82599,
+ .mac_ops = &mac_ops_82599,
+ .eeprom_ops = &eeprom_ops_82599,
+ .phy_ops = &phy_ops_82599,
+ .mbx_ops = &mbx_ops_generic,
+};
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/netdevice.h>
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
+
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw);
+static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw);
+static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw);
+static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
+static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset);
+
+/**
+ * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
+{
+ u32 ctrl_ext;
+
+ /* Set the media type */
+ hw->phy.media_type = hw->mac.ops.get_media_type(hw);
+
+ /* Identify the PHY */
+ hw->phy.ops.identify(hw);
+
+ /* Clear the VLAN filter table */
+ hw->mac.ops.clear_vfta(hw);
+
+ /* Clear statistics registers */
+ hw->mac.ops.clear_hw_cntrs(hw);
+
+ /* Set No Snoop Disable */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Setup flow control */
+ ixgbe_setup_fc(hw, 0);
+
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return 0;
+}
+
+/**
+ * ixgbe_start_hw_gen2 - Init sequence for common device family
+ * @hw: pointer to hw structure
+ *
+ * Performs the init sequence common to the second generation
+ * of 10 GbE devices.
+ * Devices in the second generation:
+ * 82599
+ * X540
+ **/
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 regval;
+
+ /* Clear the rate limiters */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
+ }
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Disable relaxed ordering */
+ for (i = 0; i < hw->mac.max_tx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
+ regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
+ }
+
+ for (i = 0; i < hw->mac.max_rx_queues; i++) {
+ regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
+ IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_hw_generic - Generic hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware, filling the bus info
+ * structure and media type, clears all on chip counters, initializes receive
+ * address registers, multicast table, VLAN filter table, calls routine to set
+ * up link and flow control settings, and leaves transmit and receive units
+ * disabled and uninitialized
+ **/
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+
+ /* Reset the hardware */
+ status = hw->mac.ops.reset_hw(hw);
+
+ if (status == 0) {
+ /* Start the HW */
+ status = hw->mac.ops.start_hw(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ * @hw: pointer to hardware structure
+ *
+ * Clears all hardware statistics counters by reading them from the hardware
+ * Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
+{
+ u16 i = 0;
+
+ IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+ IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+ IXGBE_READ_REG(hw, IXGBE_ERRBC);
+ IXGBE_READ_REG(hw, IXGBE_MSPDC);
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+ IXGBE_READ_REG(hw, IXGBE_MLFC);
+ IXGBE_READ_REG(hw, IXGBE_MRFC);
+ IXGBE_READ_REG(hw, IXGBE_RLEC);
+ IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+ IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+ }
+
+ for (i = 0; i < 8; i++) {
+ IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+ IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+ }
+ }
+ if (hw->mac.type >= ixgbe_mac_82599EB)
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
+ IXGBE_READ_REG(hw, IXGBE_PRC64);
+ IXGBE_READ_REG(hw, IXGBE_PRC127);
+ IXGBE_READ_REG(hw, IXGBE_PRC255);
+ IXGBE_READ_REG(hw, IXGBE_PRC511);
+ IXGBE_READ_REG(hw, IXGBE_PRC1023);
+ IXGBE_READ_REG(hw, IXGBE_PRC1522);
+ IXGBE_READ_REG(hw, IXGBE_GPRC);
+ IXGBE_READ_REG(hw, IXGBE_BPRC);
+ IXGBE_READ_REG(hw, IXGBE_MPRC);
+ IXGBE_READ_REG(hw, IXGBE_GPTC);
+ IXGBE_READ_REG(hw, IXGBE_GORCL);
+ IXGBE_READ_REG(hw, IXGBE_GORCH);
+ IXGBE_READ_REG(hw, IXGBE_GOTCL);
+ IXGBE_READ_REG(hw, IXGBE_GOTCH);
+ for (i = 0; i < 8; i++)
+ IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+ IXGBE_READ_REG(hw, IXGBE_RUC);
+ IXGBE_READ_REG(hw, IXGBE_RFC);
+ IXGBE_READ_REG(hw, IXGBE_ROC);
+ IXGBE_READ_REG(hw, IXGBE_RJC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+ IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+ IXGBE_READ_REG(hw, IXGBE_TORL);
+ IXGBE_READ_REG(hw, IXGBE_TORH);
+ IXGBE_READ_REG(hw, IXGBE_TPR);
+ IXGBE_READ_REG(hw, IXGBE_TPT);
+ IXGBE_READ_REG(hw, IXGBE_PTC64);
+ IXGBE_READ_REG(hw, IXGBE_PTC127);
+ IXGBE_READ_REG(hw, IXGBE_PTC255);
+ IXGBE_READ_REG(hw, IXGBE_PTC511);
+ IXGBE_READ_REG(hw, IXGBE_PTC1023);
+ IXGBE_READ_REG(hw, IXGBE_PTC1522);
+ IXGBE_READ_REG(hw, IXGBE_MPTC);
+ IXGBE_READ_REG(hw, IXGBE_BPTC);
+ for (i = 0; i < 16; i++) {
+ IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+ if (hw->mac.type >= ixgbe_mac_82599EB) {
+ IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
+ IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+ } else {
+ IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+ IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+ }
+ }
+
+ if (hw->mac.type == ixgbe_mac_X540) {
+ if (hw->phy.id == 0)
+ hw->phy.ops.identify(hw);
+ hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i);
+ hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i);
+ hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i);
+ hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
+ * @hw: pointer to hardware structure
+ * @pba_num: stores the part number string from the EEPROM
+ * @pba_num_size: part number string buffer length
+ *
+ * Reads the part number string from the EEPROM.
+ **/
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+ u32 pba_num_size)
+{
+ s32 ret_val;
+ u16 data;
+ u16 pba_ptr;
+ u16 offset;
+ u16 length;
+
+ if (pba_num == NULL) {
+ hw_dbg(hw, "PBA string buffer was null\n");
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+
+ /*
+ * if data is not ptr guard the PBA must be in legacy format which
+ * means pba_ptr is actually our second data word for the PBA number
+ * and we can decode it into an ascii string
+ */
+ if (data != IXGBE_PBANUM_PTR_GUARD) {
+ hw_dbg(hw, "NVM PBA number is not stored as string\n");
+
+ /* we will need 11 characters to store the PBA */
+ if (pba_num_size < 11) {
+ hw_dbg(hw, "PBA string buffer too small\n");
+ return IXGBE_ERR_NO_SPACE;
+ }
+
+ /* extract hex string from data and pba_ptr */
+ pba_num[0] = (data >> 12) & 0xF;
+ pba_num[1] = (data >> 8) & 0xF;
+ pba_num[2] = (data >> 4) & 0xF;
+ pba_num[3] = data & 0xF;
+ pba_num[4] = (pba_ptr >> 12) & 0xF;
+ pba_num[5] = (pba_ptr >> 8) & 0xF;
+ pba_num[6] = '-';
+ pba_num[7] = 0;
+ pba_num[8] = (pba_ptr >> 4) & 0xF;
+ pba_num[9] = pba_ptr & 0xF;
+
+ /* put a null character on the end of our string */
+ pba_num[10] = '\0';
+
+ /* switch all the data but the '-' to hex char */
+ for (offset = 0; offset < 10; offset++) {
+ if (pba_num[offset] < 0xA)
+ pba_num[offset] += '0';
+ else if (pba_num[offset] < 0x10)
+ pba_num[offset] += 'A' - 0xA;
+ }
+
+ return 0;
+ }
+
+ ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+
+ if (length == 0xFFFF || length == 0) {
+ hw_dbg(hw, "NVM PBA number section invalid length\n");
+ return IXGBE_ERR_PBA_SECTION;
+ }
+
+ /* check if pba_num buffer is big enough */
+ if (pba_num_size < (((u32)length * 2) - 1)) {
+ hw_dbg(hw, "PBA string buffer too small\n");
+ return IXGBE_ERR_NO_SPACE;
+ }
+
+ /* trim pba length from start of string */
+ pba_ptr++;
+ length--;
+
+ for (offset = 0; offset < length; offset++) {
+ ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
+ if (ret_val) {
+ hw_dbg(hw, "NVM Read Error\n");
+ return ret_val;
+ }
+ pba_num[offset * 2] = (u8)(data >> 8);
+ pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
+ }
+ pba_num[offset * 2] = '\0';
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_mac_addr_generic - Generic get MAC address
+ * @hw: pointer to hardware structure
+ * @mac_addr: Adapter MAC address
+ *
+ * Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ * A reset of the adapter must be performed prior to calling this function
+ * in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ u32 rar_high;
+ u32 rar_low;
+ u16 i;
+
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+ rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+ for (i = 0; i < 4; i++)
+ mac_addr[i] = (u8)(rar_low >> (i*8));
+
+ for (i = 0; i < 2; i++)
+ mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_bus_info_generic - Generic set PCI bus info
+ * @hw: pointer to hardware structure
+ *
+ * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ struct ixgbe_mac_info *mac = &hw->mac;
+ u16 link_status;
+
+ hw->bus.type = ixgbe_bus_type_pci_express;
+
+ /* Get the negotiated link width and speed from PCI config space */
+ pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS,
+ &link_status);
+
+ switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+ case IXGBE_PCI_LINK_WIDTH_1:
+ hw->bus.width = ixgbe_bus_width_pcie_x1;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_2:
+ hw->bus.width = ixgbe_bus_width_pcie_x2;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_4:
+ hw->bus.width = ixgbe_bus_width_pcie_x4;
+ break;
+ case IXGBE_PCI_LINK_WIDTH_8:
+ hw->bus.width = ixgbe_bus_width_pcie_x8;
+ break;
+ default:
+ hw->bus.width = ixgbe_bus_width_unknown;
+ break;
+ }
+
+ switch (link_status & IXGBE_PCI_LINK_SPEED) {
+ case IXGBE_PCI_LINK_SPEED_2500:
+ hw->bus.speed = ixgbe_bus_speed_2500;
+ break;
+ case IXGBE_PCI_LINK_SPEED_5000:
+ hw->bus.speed = ixgbe_bus_speed_5000;
+ break;
+ default:
+ hw->bus.speed = ixgbe_bus_speed_unknown;
+ break;
+ }
+
+ mac->ops.set_lan_id(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
+ * @hw: pointer to the HW structure
+ *
+ * Determines the LAN function id by reading memory-mapped registers
+ * and swaps the port value if requested.
+ **/
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
+{
+ struct ixgbe_bus_info *bus = &hw->bus;
+ u32 reg;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
+ bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
+ bus->lan_id = bus->func;
+
+ /* check for a port swap */
+ reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
+ if (reg & IXGBE_FACTPS_LFS)
+ bus->func ^= 0x1;
+}
+
+/**
+ * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
+{
+ u32 number_of_queues;
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit */
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ reg_val &= ~(IXGBE_RXCTRL_RXEN);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+ IXGBE_WRITE_FLUSH(hw);
+ usleep_range(2000, 4000);
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts */
+ IXGBE_READ_REG(hw, IXGBE_EICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ number_of_queues = hw->mac.max_tx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+ if (reg_val & IXGBE_TXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val);
+ }
+ }
+
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ ixgbe_disable_pcie_master(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn on
+ **/
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* To turn on the LED, set mode to ON. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ * @hw: pointer to hardware structure
+ * @index: led number to turn off
+ **/
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /* To turn off the LED, set mode to OFF. */
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->type = ixgbe_eeprom_none;
+ /* Set default semaphore delay to 10ms which is a well
+ * tested value */
+ eeprom->semaphore_delay = 10;
+ /* Clear EEPROM page size, it will be initialized as needed */
+ eeprom->word_page_size = 0;
+
+ /*
+ * Check for EEPROM present first.
+ * If not present leave as none
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_PRES) {
+ eeprom->type = ixgbe_eeprom_spi;
+
+ /*
+ * SPI EEPROM is assumed here. This code would need to
+ * change if a future EEPROM is not SPI.
+ */
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+ }
+
+ if (eec & IXGBE_EEC_ADDR_SIZE)
+ eeprom->address_bits = 16;
+ else
+ eeprom->address_bits = 8;
+ hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: "
+ "%d\n", eeprom->type, eeprom->word_size,
+ eeprom->address_bits);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to write
+ * @words: number of words
+ * @data: 16 bit word(s) to write to EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * The EEPROM page size cannot be queried from the chip. We do lazy
+ * initialization. It is worth to do that when we write large buffer.
+ */
+ if ((hw->eeprom.word_page_size == 0) &&
+ (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
+ ixgbe_detect_eeprom_page_size_generic(hw, offset);
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of word(s)
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word;
+ u16 page_size;
+ u16 i;
+ u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+ /* Prepare the EEPROM for writing */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == 0) {
+ if (ixgbe_ready_eeprom(hw) != 0) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == 0) {
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+
+ /* Send the WRITE ENABLE command (8 bit opcode ) */
+ ixgbe_shift_out_eeprom_bits(hw,
+ IXGBE_EEPROM_WREN_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+
+ ixgbe_standby_eeprom(hw);
+
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the Write command (8-bit opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ page_size = hw->eeprom.word_page_size;
+
+ /* Send the data in burst via SPI*/
+ do {
+ word = data[i];
+ word = (word >> 8) | (word << 8);
+ ixgbe_shift_out_eeprom_bits(hw, word, 16);
+
+ if (page_size == 0)
+ break;
+
+ /* do not wrap around page */
+ if (((offset + i) & (page_size - 1)) ==
+ (page_size - 1))
+ break;
+ } while (++i < words);
+
+ ixgbe_standby_eeprom(hw);
+ usleep_range(10000, 20000);
+ }
+ /* Done with writing - release the EEPROM */
+ ixgbe_release_eeprom(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be written to
+ * @data: 16 bit word to be written to the EEPROM
+ *
+ * If ixgbe_eeprom_update_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit words(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status = 0;
+ u16 i, count;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset + words > hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ /*
+ * We cannot hold synchronization semaphores for too long
+ * to avoid other entity starvation. However it is more efficient
+ * to read in bursts than synchronizing access for each word.
+ */
+ for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
+ count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
+ IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
+ count, &data[i]);
+
+ if (status != 0)
+ break;
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @words: number of word(s)
+ * @data: read 16 bit word(s) from EEPROM
+ *
+ * Reads 16 bit word(s) from EEPROM through bit-bang method
+ **/
+static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ s32 status;
+ u16 word_in;
+ u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+ u16 i;
+
+ /* Prepare the EEPROM for reading */
+ status = ixgbe_acquire_eeprom(hw);
+
+ if (status == 0) {
+ if (ixgbe_ready_eeprom(hw) != 0) {
+ ixgbe_release_eeprom(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ }
+
+ if (status == 0) {
+ for (i = 0; i < words; i++) {
+ ixgbe_standby_eeprom(hw);
+ /*
+ * Some SPI eeproms use the 8th address bit embedded
+ * in the opcode
+ */
+ if ((hw->eeprom.address_bits == 8) &&
+ ((offset + i) >= 128))
+ read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+ /* Send the READ command (opcode + addr) */
+ ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+ IXGBE_EEPROM_OPCODE_BITS);
+ ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
+ hw->eeprom.address_bits);
+
+ /* Read the data. */
+ word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+ data[i] = (word_in >> 8) | (word_in << 8);
+ }
+
+ /* End this read operation */
+ ixgbe_release_eeprom(hw);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be read
+ * @data: read 16 bit value from EEPROM
+ *
+ * Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data)
+{
+ s32 status;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of word(s)
+ * @data: 16 bit word(s) from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eerd;
+ s32 status = 0;
+ u32 i;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
+ IXGBE_EEPROM_RW_REG_START;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
+
+ if (status == 0) {
+ data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+ IXGBE_EEPROM_RW_REG_DATA);
+ } else {
+ hw_dbg(hw, "Eeprom read timed out\n");
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
+ * @hw: pointer to hardware structure
+ * @offset: offset within the EEPROM to be used as a scratch pad
+ *
+ * Discover EEPROM page size by writing marching data at given offset.
+ * This function is called only when we are writing a new large buffer
+ * at given offset so the data would be overwritten anyway.
+ **/
+static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
+ u16 offset)
+{
+ u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
+ s32 status = 0;
+ u16 i;
+
+ for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
+ data[i] = i;
+
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
+ status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
+ IXGBE_EEPROM_PAGE_SIZE_MAX, data);
+ hw->eeprom.word_page_size = 0;
+ if (status != 0)
+ goto out;
+
+ status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
+ if (status != 0)
+ goto out;
+
+ /*
+ * When writing in burst more than the actual page size
+ * EEPROM address wraps around current page.
+ */
+ hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
+
+ hw_dbg(hw, "Detected EEPROM page size = %d words.",
+ hw->eeprom.word_page_size);
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_generic - Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
+}
+
+/**
+ * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ u32 eewr;
+ s32 status = 0;
+ u16 i;
+
+ hw->eeprom.ops.init_params(hw);
+
+ if (words == 0) {
+ status = IXGBE_ERR_INVALID_ARGUMENT;
+ goto out;
+ }
+
+ if (offset >= hw->eeprom.word_size) {
+ status = IXGBE_ERR_EEPROM;
+ goto out;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
+ (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
+ IXGBE_EEPROM_RW_REG_START;
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
+
+ status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
+ if (status != 0) {
+ hw_dbg(hw, "Eeprom write EEWR timed out\n");
+ goto out;
+ }
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
+}
+
+/**
+ * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
+ * @hw: pointer to hardware structure
+ * @ee_reg: EEPROM flag for polling
+ *
+ * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
+ * read or write is done respectively.
+ **/
+static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
+ if (ee_reg == IXGBE_NVM_POLL_READ)
+ reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+ else
+ reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
+
+ if (reg & IXGBE_EEPROM_RW_REG_DONE) {
+ status = 0;
+ break;
+ }
+ udelay(5);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ * @hw: pointer to hardware structure
+ *
+ * Prepares EEPROM for access using bit-bang method. This function should
+ * be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 eec;
+ u32 i;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Request EEPROM Access */
+ eec |= IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (eec & IXGBE_EEC_GNT)
+ break;
+ udelay(5);
+ }
+
+ /* Release if grant not acquired */
+ if (!(eec & IXGBE_EEC_GNT)) {
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ hw_dbg(hw, "Could not acquire EEPROM grant\n");
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ /* Setup EEPROM for Read/Write */
+ if (status == 0) {
+ /* Clear CS and SK */
+ eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ }
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = 0;
+ break;
+ }
+ udelay(50);
+ }
+
+ if (i == timeout) {
+ hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore "
+ "not granted.\n");
+ /*
+ * this release is particularly important because our attempts
+ * above to get the semaphore may have succeeded, and if there
+ * was a timeout, we should unconditionally clear the semaphore
+ * bits to free the driver to make progress
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+
+ udelay(50);
+ /*
+ * one last try
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI))
+ status = 0;
+ }
+
+ /* Now get the semaphore between SW/FW through the SWESMBI bit */
+ if (status == 0) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Set the SW EEPROM semaphore bit to request access */
+ swsm |= IXGBE_SWSM_SWESMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+ /*
+ * If we set the bit successfully then we got the
+ * semaphore.
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (swsm & IXGBE_SWSM_SWESMBI)
+ break;
+
+ udelay(50);
+ }
+
+ /*
+ * Release semaphores and return error if SW EEPROM semaphore
+ * was not granted because we don't have access to the EEPROM
+ */
+ if (i >= timeout) {
+ hw_dbg(hw, "SWESMBI Software EEPROM semaphore "
+ "not granted.\n");
+ ixgbe_release_eeprom_semaphore(hw);
+ status = IXGBE_ERR_EEPROM;
+ }
+ } else {
+ hw_dbg(hw, "Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+ /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+ swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_ready_eeprom - Polls for EEPROM ready
+ * @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 i;
+ u8 spi_stat_reg;
+
+ /*
+ * Read "Status Register" repeatedly until the LSB is cleared. The
+ * EEPROM will signal that the command has been completed by clearing
+ * bit 0 of the internal status register. If it's not cleared within
+ * 5 milliseconds, then error out.
+ */
+ for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+ ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+ IXGBE_EEPROM_OPCODE_BITS);
+ spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+ if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+ break;
+
+ udelay(5);
+ ixgbe_standby_eeprom(hw);
+ }
+
+ /*
+ * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+ * devices (and only 0-5mSec on 5V devices)
+ */
+ if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+ hw_dbg(hw, "SPI EEPROM Status error\n");
+ status = IXGBE_ERR_EEPROM;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /* Toggle CS to flush commands */
+ eec |= IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+ eec &= ~IXGBE_EEC_CS;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ * @hw: pointer to hardware structure
+ * @data: data to send to the EEPROM
+ * @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+ u16 count)
+{
+ u32 eec;
+ u32 mask;
+ u32 i;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ /*
+ * Mask is used to shift "count" bits of "data" out to the EEPROM
+ * one bit at a time. Determine the starting bit based on count
+ */
+ mask = 0x01 << (count - 1);
+
+ for (i = 0; i < count; i++) {
+ /*
+ * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+ * "1", and then raising and then lowering the clock (the SK
+ * bit controls the clock input to the EEPROM). A "0" is
+ * shifted out to the EEPROM by setting "DI" to "0" and then
+ * raising and then lowering the clock.
+ */
+ if (data & mask)
+ eec |= IXGBE_EEC_DI;
+ else
+ eec &= ~IXGBE_EEC_DI;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ ixgbe_raise_eeprom_clk(hw, &eec);
+ ixgbe_lower_eeprom_clk(hw, &eec);
+
+ /*
+ * Shift mask to signify next bit of data to shift in to the
+ * EEPROM
+ */
+ mask = mask >> 1;
+ }
+
+ /* We leave the "DI" bit set to "0" when we leave this routine. */
+ eec &= ~IXGBE_EEC_DI;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+ u32 eec;
+ u32 i;
+ u16 data = 0;
+
+ /*
+ * In order to read a register from the EEPROM, we need to shift
+ * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+ * the clock input to the EEPROM (setting the SK bit), and then reading
+ * the value of the "DO" bit. During this "shifting in" process the
+ * "DI" bit should always be clear.
+ */
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+ for (i = 0; i < count; i++) {
+ data = data << 1;
+ ixgbe_raise_eeprom_clk(hw, &eec);
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec &= ~(IXGBE_EEC_DI);
+ if (eec & IXGBE_EEC_DO)
+ data |= 1;
+
+ ixgbe_lower_eeprom_clk(hw, &eec);
+ }
+
+ return data;
+}
+
+/**
+ * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Raise the clock input to the EEPROM
+ * (setting the SK bit), then delay
+ */
+ *eec = *eec | IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ * @hw: pointer to hardware structure
+ * @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+ /*
+ * Lower the clock input to the EEPROM (clearing the SK bit), then
+ * delay
+ */
+ *eec = *eec & ~IXGBE_EEC_SK;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+ IXGBE_WRITE_FLUSH(hw);
+ udelay(1);
+}
+
+/**
+ * ixgbe_release_eeprom - Release EEPROM, release semaphores
+ * @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+ u32 eec;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ eec |= IXGBE_EEC_CS; /* Pull CS high */
+ eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+ IXGBE_WRITE_FLUSH(hw);
+
+ udelay(1);
+
+ /* Stop requesting EEPROM access */
+ eec &= ~IXGBE_EEC_REQ;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ /*
+ * Delay before attempt to obtain semaphore again to allow FW
+ * access. semaphore_delay is in ms we need us for usleep_range
+ */
+ usleep_range(hw->eeprom.semaphore_delay * 1000,
+ hw->eeprom.semaphore_delay * 2000);
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
+ * @hw: pointer to hardware structure
+ **/
+u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ u16 i;
+ u16 j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+ if (hw->eeprom.ops.read(hw, i, &word) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+ checksum += word;
+ }
+
+ /* Include all data from pointers except for the fw pointer */
+ for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+ hw->eeprom.ops.read(hw, i, &pointer);
+
+ /* Make sure the pointer seems valid */
+ if (pointer != 0xFFFF && pointer != 0) {
+ hw->eeprom.ops.read(hw, pointer, &length);
+
+ if (length != 0xFFFF && length != 0) {
+ for (j = pointer+1; j <= pointer+length; j++) {
+ hw->eeprom.ops.read(hw, j, &word);
+ checksum += word;
+ }
+ }
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+
+ hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+
+ /*
+ * Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum)
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+ } else {
+ hw_dbg(hw, "EEPROM read failed\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+ status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+ } else {
+ hw_dbg(hw, "EEPROM read failed\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_validate_mac_addr - Validate MAC address
+ * @mac_addr: pointer to MAC address.
+ *
+ * Tests a MAC address to ensure it is a valid Individual Address
+ **/
+s32 ixgbe_validate_mac_addr(u8 *mac_addr)
+{
+ s32 status = 0;
+
+ /* Make sure it is not a multicast address */
+ if (IXGBE_IS_MULTICAST(mac_addr))
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Not a broadcast address */
+ else if (IXGBE_IS_BROADCAST(mac_addr))
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+ /* Reject the zero address */
+ else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+ mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
+ status = IXGBE_ERR_INVALID_MAC_ADDR;
+
+ return status;
+}
+
+/**
+ * ixgbe_set_rar_generic - Set Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: VMDq "set" or "pool" index
+ * @enable_addr: set flag that address is active
+ *
+ * Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr)
+{
+ u32 rar_low, rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /* setup VMDq pool selection before this RAR gets enabled */
+ hw->mac.ops.set_vmdq(hw, index, vmdq);
+
+ /*
+ * HW expects these in little endian so we reverse the byte
+ * order from network order (big endian) to little endian
+ */
+ rar_low = ((u32)addr[0] |
+ ((u32)addr[1] << 8) |
+ ((u32)addr[2] << 16) |
+ ((u32)addr[3] << 24));
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+ rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
+
+ if (enable_addr != 0)
+ rar_high |= IXGBE_RAH_AV;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_rar_generic - Remove Rx address register
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ *
+ * Clears an ethernet address from a receive address register.
+ **/
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 rar_high;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (index >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", index);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ /*
+ * Some parts put the VMDq setting in the extra RAH bits,
+ * so save everything except the lower 16 bits that hold part
+ * of the address and the address valid bit.
+ */
+ rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+ rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
+
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+ /* clear VMDq pool/queue selection for this RAR */
+ hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
+
+ return 0;
+}
+
+/**
+ * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ * @hw: pointer to hardware structure
+ *
+ * Places the MAC address in receive address register 0 and clears the rest
+ * of the receive address registers. Clears the multicast table. Assumes
+ * the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /*
+ * If the current mac address is valid, assume it is a software override
+ * to the permanent address.
+ * Otherwise, use the permanent address from the eeprom.
+ */
+ if (ixgbe_validate_mac_addr(hw->mac.addr) ==
+ IXGBE_ERR_INVALID_MAC_ADDR) {
+ /* Get the MAC address from the RAR0 for later reference */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr);
+ } else {
+ /* Setup the receive address. */
+ hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
+ hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
+
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+
+ /* clear VMDq pool/queue selection for RAR 0 */
+ hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
+ }
+ hw->addr_ctrl.overflow_promisc = 0;
+
+ hw->addr_ctrl.rar_used_count = 1;
+
+ /* Zero out the other receive addresses. */
+ hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
+ for (i = 1; i < rar_entries; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+ }
+
+ /* Clear the MTA */
+ hw->addr_ctrl.mta_in_use = 0;
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+ hw_dbg(hw, " Clearing MTA\n");
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+ if (hw->mac.ops.init_uta_tables)
+ hw->mac.ops.init_uta_tables(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ hw_dbg(hw, "MC filter type param set incorrectly\n");
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+/**
+ * ixgbe_set_mta - Set bit-vector in multicast table
+ * @hw: pointer to hardware structure
+ * @hash_value: Multicast address hash value
+ *
+ * Sets the bit-vector in the multicast table.
+ **/
+static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector;
+ u32 vector_bit;
+ u32 vector_reg;
+
+ hw->addr_ctrl.mta_in_use++;
+
+ vector = ixgbe_mta_vector(hw, mc_addr);
+ hw_dbg(hw, " bit-vector = 0x%03X\n", vector);
+
+ /*
+ * The MTA is a register array of 128 32-bit registers. It is treated
+ * like an array of 4096 bits. We want to set bit
+ * BitArray[vector_value]. So we figure out what register the bit is
+ * in, read it, OR in the new bit, then write back the new value. The
+ * register is determined by the upper 7 bits of the vector value and
+ * the bit within that register are determined by the lower 5 bits of
+ * the value.
+ */
+ vector_reg = (vector >> 5) & 0x7F;
+ vector_bit = vector & 0x1F;
+ hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
+}
+
+/**
+ * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ * @hw: pointer to hardware structure
+ * @netdev: pointer to net device structure
+ *
+ * The given list replaces any existing list. Clears the MC addrs from receive
+ * address registers and the multicast table. Uses unused receive address
+ * registers for the first multicast addresses, and hashes the rest into the
+ * multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+ struct net_device *netdev)
+{
+ struct netdev_hw_addr *ha;
+ u32 i;
+
+ /*
+ * Set the new number of MC addresses that we are being requested to
+ * use.
+ */
+ hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev);
+ hw->addr_ctrl.mta_in_use = 0;
+
+ /* Clear mta_shadow */
+ hw_dbg(hw, " Clearing MTA\n");
+ memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
+
+ /* Update mta shadow */
+ netdev_for_each_mc_addr(ha, netdev) {
+ hw_dbg(hw, " Adding the multicast addresses:\n");
+ ixgbe_set_mta(hw, ha->addr);
+ }
+
+ /* Enable mta */
+ for (i = 0; i < hw->mac.mcft_size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
+ hw->mac.mta_shadow[i]);
+
+ if (hw->addr_ctrl.mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+ IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+ hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
+ return 0;
+}
+
+/**
+ * ixgbe_enable_mc_generic - Enable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+ hw->mac.mc_filter_type);
+
+ return 0;
+}
+
+/**
+ * ixgbe_disable_mc_generic - Disable multicast address in RAR
+ * @hw: pointer to hardware structure
+ *
+ * Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+ if (a->mta_in_use > 0)
+ IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+ return 0;
+}
+
+/**
+ * ixgbe_fc_enable_generic - Enable flow control
+ * @hw: pointer to hardware structure
+ * @packetbuf_num: packet buffer number (0-7)
+ *
+ * Enable flow control according to the current settings.
+ **/
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ s32 ret_val = 0;
+ u32 mflcn_reg, fccfg_reg;
+ u32 reg;
+ u32 rx_pba_size;
+ u32 fcrtl, fcrth;
+
+#ifdef CONFIG_DCB
+ if (hw->fc.requested_mode == ixgbe_fc_pfc)
+ goto out;
+
+#endif /* CONFIG_DCB */
+ /* Negotiate the fc mode to use */
+ ret_val = ixgbe_fc_autoneg(hw);
+ if (ret_val == IXGBE_ERR_FLOW_CONTROL)
+ goto out;
+
+ /* Disable any previous flow control settings */
+ mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
+
+ fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+ fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
+
+ /*
+ * The possible values of fc.current_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
+ * 4: Priority Flow Control is enabled.
+#endif
+ * other: Invalid.
+ */
+ switch (hw->fc.current_mode) {
+ case ixgbe_fc_none:
+ /*
+ * Flow control is disabled by software override or autoneg.
+ * The code below will actually disable it in the HW.
+ */
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ mflcn_reg |= IXGBE_MFLCN_RFCE;
+ fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
+ break;
+#ifdef CONFIG_DCB
+ case ixgbe_fc_pfc:
+ goto out;
+ break;
+#endif /* CONFIG_DCB */
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ /* Set 802.3x based flow control settings. */
+ mflcn_reg |= IXGBE_MFLCN_DPF;
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
+ IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
+
+ rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
+ rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+
+ fcrth = (rx_pba_size - hw->fc.high_water) << 10;
+ fcrtl = (rx_pba_size - hw->fc.low_water) << 10;
+
+ if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+ fcrth |= IXGBE_FCRTH_FCEN;
+ if (hw->fc.send_xon)
+ fcrtl |= IXGBE_FCRTL_XONE;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth);
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl);
+
+ /* Configure pause time (2 TCs per register) */
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
+ if ((packetbuf_num & 1) == 0)
+ reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
+ else
+ reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg - Configure flow control
+ * @hw: pointer to hardware structure
+ *
+ * Compares our advertised flow control capabilities to those advertised by
+ * our link partner, and determines the proper flow control mode to use.
+ **/
+s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ ixgbe_link_speed speed;
+ bool link_up;
+
+ if (hw->fc.disable_fc_autoneg)
+ goto out;
+
+ /*
+ * AN should have completed when the cable was plugged in.
+ * Look for reasons to bail out. Bail out if:
+ * - FC autoneg is disabled, or if
+ * - link is not up.
+ *
+ * Since we're being called from an LSC, link is already known to be up.
+ * So use link_up_wait_to_complete=false.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+ if (!link_up) {
+ ret_val = IXGBE_ERR_FLOW_CONTROL;
+ goto out;
+ }
+
+ switch (hw->phy.media_type) {
+ /* Autoneg flow control on fiber adapters */
+ case ixgbe_media_type_fiber:
+ if (speed == IXGBE_LINK_SPEED_1GB_FULL)
+ ret_val = ixgbe_fc_autoneg_fiber(hw);
+ break;
+
+ /* Autoneg flow control on backplane adapters */
+ case ixgbe_media_type_backplane:
+ ret_val = ixgbe_fc_autoneg_backplane(hw);
+ break;
+
+ /* Autoneg flow control on copper adapters */
+ case ixgbe_media_type_copper:
+ if (ixgbe_device_supports_autoneg_fc(hw) == 0)
+ ret_val = ixgbe_fc_autoneg_copper(hw);
+ break;
+
+ default:
+ break;
+ }
+
+out:
+ if (ret_val == 0) {
+ hw->fc.fc_was_autonegged = true;
+ } else {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ }
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according on 1 gig fiber.
+ **/
+static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
+{
+ u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
+ s32 ret_val;
+
+ /*
+ * On multispeed fiber at 1g, bail out if
+ * - link is up but AN did not complete, or if
+ * - link is up and AN completed but timed out
+ */
+
+ linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+ if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
+ ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
+ ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ goto out;
+ }
+
+ pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+
+ ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg,
+ pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
+ IXGBE_PCS1GANA_ASM_PAUSE,
+ IXGBE_PCS1GANA_SYM_PAUSE,
+ IXGBE_PCS1GANA_ASM_PAUSE);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
+{
+ u32 links2, anlp1_reg, autoc_reg, links;
+ s32 ret_val;
+
+ /*
+ * On backplane, bail out if
+ * - backplane autoneg was not completed, or if
+ * - we are 82599 and link partner is not AN enabled
+ */
+ links = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ goto out;
+ }
+
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
+ if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
+ hw->fc.fc_was_autonegged = false;
+ hw->fc.current_mode = hw->fc.requested_mode;
+ ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
+ goto out;
+ }
+ }
+ /*
+ * Read the 10g AN autoc and LP ability registers and resolve
+ * local flow control settings accordingly
+ */
+ autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+
+ ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
+ anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
+ IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
+ * @hw: pointer to hardware structure
+ *
+ * Enable flow control according to IEEE clause 37.
+ **/
+static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
+{
+ u16 technology_ability_reg = 0;
+ u16 lp_technology_ability_reg = 0;
+
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ &technology_ability_reg);
+ hw->phy.ops.read_reg(hw, MDIO_AN_LPA,
+ MDIO_MMD_AN,
+ &lp_technology_ability_reg);
+
+ return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
+ (u32)lp_technology_ability_reg,
+ IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
+ IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
+}
+
+/**
+ * ixgbe_negotiate_fc - Negotiate flow control
+ * @hw: pointer to hardware structure
+ * @adv_reg: flow control advertised settings
+ * @lp_reg: link partner's flow control settings
+ * @adv_sym: symmetric pause bit in advertisement
+ * @adv_asm: asymmetric pause bit in advertisement
+ * @lp_sym: symmetric pause bit in link partner advertisement
+ * @lp_asm: asymmetric pause bit in link partner advertisement
+ *
+ * Find the intersection between advertised settings and link partner's
+ * advertised settings
+ **/
+static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
+ u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
+{
+ if ((!(adv_reg)) || (!(lp_reg)))
+ return IXGBE_ERR_FC_NOT_NEGOTIATED;
+
+ if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
+ /*
+ * Now we need to check if the user selected Rx ONLY
+ * of pause frames. In this case, we had to advertise
+ * FULL flow control because we could not advertise RX
+ * ONLY. Hence, we must now check to see if we need to
+ * turn OFF the TRANSMISSION of PAUSE frames.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_full) {
+ hw->fc.current_mode = ixgbe_fc_full;
+ hw_dbg(hw, "Flow Control = FULL.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control=RX PAUSE frames only\n");
+ }
+ } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+ (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+ hw->fc.current_mode = ixgbe_fc_tx_pause;
+ hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
+ } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
+ !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
+ hw->fc.current_mode = ixgbe_fc_rx_pause;
+ hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
+ } else {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw_dbg(hw, "Flow Control = NONE.\n");
+ }
+ return 0;
+}
+
+/**
+ * ixgbe_setup_fc - Set up flow control
+ * @hw: pointer to hardware structure
+ *
+ * Called at init time to set up flow control.
+ **/
+static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+ s32 ret_val = 0;
+ u32 reg = 0, reg_bp = 0;
+ u16 reg_cu = 0;
+
+#ifdef CONFIG_DCB
+ if (hw->fc.requested_mode == ixgbe_fc_pfc) {
+ hw->fc.current_mode = hw->fc.requested_mode;
+ goto out;
+ }
+
+#endif /* CONFIG_DCB */
+ /* Validate the packetbuf configuration */
+ if (packetbuf_num < 0 || packetbuf_num > 7) {
+ hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
+ "is 0-7\n", packetbuf_num);
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * Validate the water mark configuration. Zero water marks are invalid
+ * because it causes the controller to just blast out fc packets.
+ */
+ if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
+ hw_dbg(hw, "Invalid water mark configuration\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * Validate the requested mode. Strict IEEE mode does not allow
+ * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
+ */
+ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
+ hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict "
+ "IEEE mode\n");
+ ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
+ goto out;
+ }
+
+ /*
+ * 10gig parts do not have a word in the EEPROM to determine the
+ * default flow control setting, so we explicitly set it to full.
+ */
+ if (hw->fc.requested_mode == ixgbe_fc_default)
+ hw->fc.requested_mode = ixgbe_fc_full;
+
+ /*
+ * Set up the 1G and 10G flow control advertisement registers so the
+ * HW will be able to do fc autoneg once the cable is plugged in. If
+ * we link at 10G, the 1G advertisement is harmless and vice versa.
+ */
+
+ switch (hw->phy.media_type) {
+ case ixgbe_media_type_fiber:
+ case ixgbe_media_type_backplane:
+ reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ break;
+
+ case ixgbe_media_type_copper:
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN, ®_cu);
+ break;
+
+ default:
+ ;
+ }
+
+ /*
+ * The possible values of fc.requested_mode are:
+ * 0: Flow control is completely disabled
+ * 1: Rx flow control is enabled (we can receive pause frames,
+ * but not send pause frames).
+ * 2: Tx flow control is enabled (we can send pause frames but
+ * we do not support receiving pause frames).
+ * 3: Both Rx and Tx flow control (symmetric) are enabled.
+#ifdef CONFIG_DCB
+ * 4: Priority Flow Control is enabled.
+#endif
+ * other: Invalid.
+ */
+ switch (hw->fc.requested_mode) {
+ case ixgbe_fc_none:
+ /* Flow control completely disabled by software override. */
+ reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+ if (hw->phy.media_type == ixgbe_media_type_backplane)
+ reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE);
+ else if (hw->phy.media_type == ixgbe_media_type_copper)
+ reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+ break;
+ case ixgbe_fc_rx_pause:
+ /*
+ * Rx Flow control is enabled and Tx Flow control is
+ * disabled by software override. Since there really
+ * isn't a way to advertise that we are capable of RX
+ * Pause ONLY, we will advertise that we support both
+ * symmetric and asymmetric Rx PAUSE. Later, we will
+ * disable the adapter's ability to send PAUSE frames.
+ */
+ reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+ if (hw->phy.media_type == ixgbe_media_type_backplane)
+ reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE);
+ else if (hw->phy.media_type == ixgbe_media_type_copper)
+ reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+ break;
+ case ixgbe_fc_tx_pause:
+ /*
+ * Tx Flow control is enabled, and Rx Flow control is
+ * disabled by software override.
+ */
+ reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
+ reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ reg_bp |= (IXGBE_AUTOC_ASM_PAUSE);
+ reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE);
+ } else if (hw->phy.media_type == ixgbe_media_type_copper) {
+ reg_cu |= (IXGBE_TAF_ASM_PAUSE);
+ reg_cu &= ~(IXGBE_TAF_SYM_PAUSE);
+ }
+ break;
+ case ixgbe_fc_full:
+ /* Flow control (both Rx and Tx) is enabled by SW override. */
+ reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
+ if (hw->phy.media_type == ixgbe_media_type_backplane)
+ reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
+ IXGBE_AUTOC_ASM_PAUSE);
+ else if (hw->phy.media_type == ixgbe_media_type_copper)
+ reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
+ break;
+#ifdef CONFIG_DCB
+ case ixgbe_fc_pfc:
+ goto out;
+ break;
+#endif /* CONFIG_DCB */
+ default:
+ hw_dbg(hw, "Flow control param set incorrectly\n");
+ ret_val = IXGBE_ERR_CONFIG;
+ goto out;
+ break;
+ }
+
+ if (hw->mac.type != ixgbe_mac_X540) {
+ /*
+ * Enable auto-negotiation between the MAC & PHY;
+ * the MAC will advertise clause 37 flow control.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
+ reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+
+ /* Disable AN timeout */
+ if (hw->fc.strict_ieee)
+ reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
+ hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
+ }
+
+ /*
+ * AUTOC restart handles negotiation of 1G and 10G on backplane
+ * and copper. There is no need to set the PCS1GCTL register.
+ *
+ */
+ if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ reg_bp |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp);
+ } else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
+ (ixgbe_device_supports_autoneg_fc(hw) == 0)) {
+ hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN, reg_cu);
+ }
+
+ hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_disable_pcie_master - Disable PCI-express master access
+ * @hw: pointer to hardware structure
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ * bit hasn't caused the master requests to be disabled, else 0
+ * is returned signifying master requests disabled.
+ **/
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u32 i;
+ u32 reg_val;
+ u32 number_of_queues;
+ s32 status = 0;
+ u16 dev_status = 0;
+
+ /* Just jump out if bus mastering is already disabled */
+ if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+ goto out;
+
+ /* Disable the receive unit by stopping each queue */
+ number_of_queues = hw->mac.max_rx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ if (reg_val & IXGBE_RXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
+ }
+ }
+
+ reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ reg_val |= IXGBE_CTRL_GIO_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
+
+ for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+ if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
+ goto check_device_status;
+ udelay(100);
+ }
+
+ hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n");
+ status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+ /*
+ * Before proceeding, make sure that the PCIe block does not have
+ * transactions pending.
+ */
+check_device_status:
+ for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+ pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS,
+ &dev_status);
+ if (!(dev_status & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
+ break;
+ udelay(100);
+ }
+
+ if (i == IXGBE_PCI_MASTER_DISABLE_TIMEOUT)
+ hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n");
+ else
+ goto out;
+
+ /*
+ * Two consecutive resets are required via CTRL.RST per datasheet
+ * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine
+ * of this need. The first reset prevents new master requests from
+ * being issued by our device. We then must wait 1usec for any
+ * remaining completions from the PCIe bus to trickle in, and then reset
+ * again to clear out any effects they may have had on our device.
+ */
+ hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+
+out:
+ return status;
+}
+
+
+/**
+ * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 gssr;
+ u32 swmask = mask;
+ u32 fwmask = mask << 5;
+ s32 timeout = 200;
+
+ while (timeout) {
+ /*
+ * SW EEPROM semaphore bit is used for access to all
+ * SW_FW_SYNC/GSSR bits (not just EEPROM)
+ */
+ if (ixgbe_get_eeprom_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ if (!(gssr & (fwmask | swmask)))
+ break;
+
+ /*
+ * Firmware currently using resource (fwmask) or other software
+ * thread currently using resource (swmask)
+ */
+ ixgbe_release_eeprom_semaphore(hw);
+ usleep_range(5000, 10000);
+ timeout--;
+ }
+
+ if (!timeout) {
+ hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n");
+ return IXGBE_ERR_SWFW_SYNC;
+ }
+
+ gssr |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+ ixgbe_release_eeprom_semaphore(hw);
+ return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the GSSR register for the specified
+ * function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 gssr;
+ u32 swmask = mask;
+
+ ixgbe_get_eeprom_semaphore(hw);
+
+ gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+ gssr &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+ ixgbe_release_eeprom_semaphore(hw);
+}
+
+/**
+ * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
+ * @hw: pointer to hardware structure
+ * @regval: register value to write to RXCTRL
+ *
+ * Enables the Rx DMA unit
+ **/
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
+{
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_start_generic - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+ ixgbe_link_speed speed = 0;
+ bool link_up = 0;
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ /*
+ * Link must be up to auto-blink the LEDs;
+ * Force it if link is down.
+ */
+ hw->mac.ops.check_link(hw, &speed, &link_up, false);
+
+ if (!link_up) {
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ autoc_reg |= IXGBE_AUTOC_FLU;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+ usleep_range(10000, 20000);
+ }
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+ u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+ autoc_reg &= ~IXGBE_AUTOC_FLU;
+ autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+ led_reg &= ~IXGBE_LED_MODE_MASK(index);
+ led_reg &= ~IXGBE_LED_BLINK(index);
+ led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_offset: SAN MAC address offset
+ *
+ * This function will read the EEPROM location for the SAN MAC address
+ * pointer, and returns the value at that location. This is used in both
+ * get and set mac_addr routines.
+ **/
+static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
+ u16 *san_mac_offset)
+{
+ /*
+ * First read the EEPROM pointer to see if the MAC addresses are
+ * available.
+ */
+ hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
+ * @hw: pointer to hardware structure
+ * @san_mac_addr: SAN MAC address
+ *
+ * Reads the SAN MAC address from the EEPROM, if it's available. This is
+ * per-port, so set_lan_id() must be called before reading the addresses.
+ * set_lan_id() is called by identify_sfp(), but this cannot be relied
+ * upon for non-SFP connections, so we must call it here.
+ **/
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
+{
+ u16 san_mac_data, san_mac_offset;
+ u8 i;
+
+ /*
+ * First read the EEPROM pointer to see if the MAC addresses are
+ * available. If they're not, no point in calling set_lan_id() here.
+ */
+ ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
+
+ if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
+ /*
+ * No addresses available in this EEPROM. It's not an
+ * error though, so just wipe the local address and return.
+ */
+ for (i = 0; i < 6; i++)
+ san_mac_addr[i] = 0xFF;
+
+ goto san_mac_addr_out;
+ }
+
+ /* make sure we know which port we need to program */
+ hw->mac.ops.set_lan_id(hw);
+ /* apply the port offset to the address offset */
+ (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
+ (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
+ for (i = 0; i < 3; i++) {
+ hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
+ san_mac_addr[i * 2] = (u8)(san_mac_data);
+ san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
+ san_mac_offset++;
+ }
+
+san_mac_addr_out:
+ return 0;
+}
+
+/**
+ * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u16 msix_count;
+ pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
+ &msix_count);
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW, so increment to give proper value */
+ msix_count++;
+
+ return msix_count;
+}
+
+/**
+ * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to disassociate
+ * @vmdq: VMDq pool index to remove from the rar
+ **/
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar_lo, mpsar_hi;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+
+ if (!mpsar_lo && !mpsar_hi)
+ goto done;
+
+ if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
+ if (mpsar_lo) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
+ mpsar_lo = 0;
+ }
+ if (mpsar_hi) {
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
+ mpsar_hi = 0;
+ }
+ } else if (vmdq < 32) {
+ mpsar_lo &= ~(1 << vmdq);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
+ } else {
+ mpsar_hi &= ~(1 << (vmdq - 32));
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
+ }
+
+ /* was that the last pool using this rar? */
+ if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
+ hw->mac.ops.clear_rar(hw, rar);
+done:
+ return 0;
+}
+
+/**
+ * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
+ * @hw: pointer to hardware struct
+ * @rar: receive address register index to associate with a VMDq index
+ * @vmdq: VMDq pool index
+ **/
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
+{
+ u32 mpsar;
+ u32 rar_entries = hw->mac.num_rar_entries;
+
+ /* Make sure we are using a valid rar index range */
+ if (rar >= rar_entries) {
+ hw_dbg(hw, "RAR index %d is out of range.\n", rar);
+ return IXGBE_ERR_INVALID_ARGUMENT;
+ }
+
+ if (vmdq < 32) {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
+ mpsar |= 1 << vmdq;
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
+ } else {
+ mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
+ mpsar |= 1 << (vmdq - 32);
+ IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
+ }
+ return 0;
+}
+
+/**
+ * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
+{
+ int i;
+
+ for (i = 0; i < 128; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
+
+ return 0;
+}
+
+/**
+ * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ *
+ * return the VLVF index where this VLAN id should be placed
+ *
+ **/
+static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
+{
+ u32 bits = 0;
+ u32 first_empty_slot = 0;
+ s32 regindex;
+
+ /* short cut the special case */
+ if (vlan == 0)
+ return 0;
+
+ /*
+ * Search for the vlan id in the VLVF entries. Save off the first empty
+ * slot found along the way
+ */
+ for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
+ bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
+ if (!bits && !(first_empty_slot))
+ first_empty_slot = regindex;
+ else if ((bits & 0x0FFF) == vlan)
+ break;
+ }
+
+ /*
+ * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
+ * in the VLVF. Else use the first empty VLVF register for this
+ * vlan id.
+ */
+ if (regindex >= IXGBE_VLVF_ENTRIES) {
+ if (first_empty_slot)
+ regindex = first_empty_slot;
+ else {
+ hw_dbg(hw, "No space in VLVF.\n");
+ regindex = IXGBE_ERR_NO_SPACE;
+ }
+ }
+
+ return regindex;
+}
+
+/**
+ * ixgbe_set_vfta_generic - Set VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vlan: VLAN id to write to VLAN filter
+ * @vind: VMDq output index that maps queue to VLAN id in VFVFB
+ * @vlan_on: boolean flag to turn on/off VLAN in VFVF
+ *
+ * Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ s32 regindex;
+ u32 bitindex;
+ u32 vfta;
+ u32 bits;
+ u32 vt;
+ u32 targetbit;
+ bool vfta_changed = false;
+
+ if (vlan > 4095)
+ return IXGBE_ERR_PARAM;
+
+ /*
+ * this is a 2 part operation - first the VFTA, then the
+ * VLVF and VLVFB if VT Mode is set
+ * We don't write the VFTA until we know the VLVF part succeeded.
+ */
+
+ /* Part 1
+ * The VFTA is a bitstring made up of 128 32-bit registers
+ * that enable the particular VLAN id, much like the MTA:
+ * bits[11-5]: which register
+ * bits[4-0]: which bit in the register
+ */
+ regindex = (vlan >> 5) & 0x7F;
+ bitindex = vlan & 0x1F;
+ targetbit = (1 << bitindex);
+ vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
+
+ if (vlan_on) {
+ if (!(vfta & targetbit)) {
+ vfta |= targetbit;
+ vfta_changed = true;
+ }
+ } else {
+ if ((vfta & targetbit)) {
+ vfta &= ~targetbit;
+ vfta_changed = true;
+ }
+ }
+
+ /* Part 2
+ * If VT Mode is set
+ * Either vlan_on
+ * make sure the vlan is in VLVF
+ * set the vind bit in the matching VLVFB
+ * Or !vlan_on
+ * clear the pool bit and possibly the vind
+ */
+ vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ if (vt & IXGBE_VT_CTL_VT_ENABLE) {
+ s32 vlvf_index;
+
+ vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
+ if (vlvf_index < 0)
+ return vlvf_index;
+
+ if (vlan_on) {
+ /* set the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index*2));
+ bits |= (1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(vlvf_index*2),
+ bits);
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index*2)+1));
+ bits |= (1 << (vind-32));
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((vlvf_index*2)+1),
+ bits);
+ }
+ } else {
+ /* clear the pool bit */
+ if (vind < 32) {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index*2));
+ bits &= ~(1 << vind);
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB(vlvf_index*2),
+ bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index*2)+1));
+ } else {
+ bits = IXGBE_READ_REG(hw,
+ IXGBE_VLVFB((vlvf_index*2)+1));
+ bits &= ~(1 << (vind-32));
+ IXGBE_WRITE_REG(hw,
+ IXGBE_VLVFB((vlvf_index*2)+1),
+ bits);
+ bits |= IXGBE_READ_REG(hw,
+ IXGBE_VLVFB(vlvf_index*2));
+ }
+ }
+
+ /*
+ * If there are still bits set in the VLVFB registers
+ * for the VLAN ID indicated we need to see if the
+ * caller is requesting that we clear the VFTA entry bit.
+ * If the caller has requested that we clear the VFTA
+ * entry bit but there are still pools/VFs using this VLAN
+ * ID entry then ignore the request. We're not worried
+ * about the case where we're turning the VFTA VLAN ID
+ * entry bit on, only when requested to turn it off as
+ * there may be multiple pools and/or VFs using the
+ * VLAN ID entry. In that case we cannot clear the
+ * VFTA bit until all pools/VFs using that VLAN ID have also
+ * been cleared. This will be indicated by "bits" being
+ * zero.
+ */
+ if (bits) {
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
+ (IXGBE_VLVF_VIEN | vlan));
+ if (!vlan_on) {
+ /* someone wants to clear the vfta entry
+ * but some pools/VFs are still using it.
+ * Ignore it. */
+ vfta_changed = false;
+ }
+ }
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
+ }
+
+ if (vfta_changed)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
+
+ return 0;
+}
+
+/**
+ * ixgbe_clear_vfta_generic - Clear VLAN filter table
+ * @hw: pointer to hardware structure
+ *
+ * Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+ u32 offset;
+
+ for (offset = 0; offset < hw->mac.vft_size; offset++)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+ for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
+ IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_check_mac_link_generic - Determine link and speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true when link is up
+ * @link_up_wait_to_complete: bool used to wait for link up or not
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete)
+{
+ u32 links_reg, links_orig;
+ u32 i;
+
+ /* clear the old state */
+ links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+ if (links_orig != links_reg) {
+ hw_dbg(hw, "LINKS changed from %08X to %08X\n",
+ links_orig, links_reg);
+ }
+
+ if (link_up_wait_to_complete) {
+ for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
+ if (links_reg & IXGBE_LINKS_UP) {
+ *link_up = true;
+ break;
+ } else {
+ *link_up = false;
+ }
+ msleep(100);
+ links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ }
+ } else {
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+ }
+
+ if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_10G_82599)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_1G_82599)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_100_82599)
+ *speed = IXGBE_LINK_SPEED_100_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_UNKNOWN;
+
+ /* if link is down, zero out the current_mode */
+ if (*link_up == false) {
+ hw->fc.current_mode = ixgbe_fc_none;
+ hw->fc.fc_was_autonegged = false;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from
+ * the EEPROM
+ * @hw: pointer to hardware structure
+ * @wwnn_prefix: the alternative WWNN prefix
+ * @wwpn_prefix: the alternative WWPN prefix
+ *
+ * This function will read the EEPROM from the alternative SAN MAC address
+ * block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix)
+{
+ u16 offset, caps;
+ u16 alt_san_mac_blk_offset;
+
+ /* clear output first */
+ *wwnn_prefix = 0xFFFF;
+ *wwpn_prefix = 0xFFFF;
+
+ /* check if alternative SAN MAC is supported */
+ hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
+ &alt_san_mac_blk_offset);
+
+ if ((alt_san_mac_blk_offset == 0) ||
+ (alt_san_mac_blk_offset == 0xFFFF))
+ goto wwn_prefix_out;
+
+ /* check capability in alternative san mac address block */
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+ hw->eeprom.ops.read(hw, offset, &caps);
+ if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+ goto wwn_prefix_out;
+
+ /* get the corresponding prefix for WWNN/WWPN */
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+ hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+
+ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+ hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+
+wwn_prefix_out:
+ return 0;
+}
+
+/**
+ * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow
+ * control
+ * @hw: pointer to hardware structure
+ *
+ * There are several phys that do not support autoneg flow control. This
+ * function check the device id to see if the associated phy supports
+ * autoneg flow control.
+ **/
+static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
+{
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_X540T:
+ return 0;
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ return 0;
+ default:
+ return IXGBE_ERR_FC_NOT_SUPPORTED;
+ }
+}
+
+/**
+ * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for anti-spoofing
+ * @pf: Physical Function pool - do not enable anti-spoofing for the PF
+ *
+ **/
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
+{
+ int j;
+ int pf_target_reg = pf >> 3;
+ int pf_target_shift = pf % 8;
+ u32 pfvfspoof = 0;
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ if (enable)
+ pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
+
+ /*
+ * PFVFSPOOF register array is size 8 with 8 bits assigned to
+ * MAC anti-spoof enables in each register array element.
+ */
+ for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
+
+ /* If not enabling anti-spoofing then done */
+ if (!enable)
+ return;
+
+ /*
+ * The PF should be allowed to spoof so that it can support
+ * emulation mode NICs. Reset the bit assigned to the PF
+ */
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg));
+ pfvfspoof ^= (1 << pf_target_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for VLAN anti-spoofing
+ * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
+ *
+ **/
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+ int vf_target_reg = vf >> 3;
+ int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
+ u32 pfvfspoof;
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
+ if (enable)
+ pfvfspoof |= (1 << vf_target_shift);
+ else
+ pfvfspoof &= ~(1 << vf_target_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
+}
+
+/**
+ * ixgbe_get_device_caps_generic - Get additional device capabilities
+ * @hw: pointer to hardware structure
+ * @device_caps: the EEPROM word with the extra device capabilities
+ *
+ * This function will read the EEPROM location for the device capabilities,
+ * and return the word through device_caps.
+ **/
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
+{
+ hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
+
+ return 0;
+}
+
+/**
+ * ixgbe_set_rxpba_generic - Initialize RX packet buffer
+ * @hw: pointer to hardware structure
+ * @num_pb: number of packet buffers to allocate
+ * @headroom: reserve n KB of headroom
+ * @strategy: packet buffer allocation strategy
+ **/
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw,
+ int num_pb,
+ u32 headroom,
+ int strategy)
+{
+ u32 pbsize = hw->mac.rx_pb_size;
+ int i = 0;
+ u32 rxpktsize, txpktsize, txpbthresh;
+
+ /* Reserve headroom */
+ pbsize -= headroom;
+
+ if (!num_pb)
+ num_pb = 1;
+
+ /* Divide remaining packet buffer space amongst the number
+ * of packet buffers requested using supplied strategy.
+ */
+ switch (strategy) {
+ case (PBA_STRATEGY_WEIGHTED):
+ /* pba_80_48 strategy weight first half of packet buffer with
+ * 5/8 of the packet buffer space.
+ */
+ rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8));
+ pbsize -= rxpktsize * (num_pb / 2);
+ rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
+ for (; i < (num_pb / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ /* Fall through to configure remaining packet buffers */
+ case (PBA_STRATEGY_EQUAL):
+ /* Divide the remaining Rx packet buffer evenly among the TCs */
+ rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
+ for (; i < num_pb; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * Setup Tx packet buffer and threshold equally for all TCs
+ * TXPBTHRESH register is set in K so divide by 1024 and subtract
+ * 10 since the largest packet we support is just over 9K.
+ */
+ txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
+ txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
+ for (i = 0; i < num_pb; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
+ }
+
+ /* Clear unused TCs, if any, to zero buffer size*/
+ for (; i < IXGBE_MAX_PB; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
+ }
+}
+
+/**
+ * ixgbe_calculate_checksum - Calculate checksum for buffer
+ * @buffer: pointer to EEPROM
+ * @length: size of EEPROM to calculate a checksum for
+ * Calculates the checksum for some buffer on a specified length. The
+ * checksum calculated is returned.
+ **/
+static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
+{
+ u32 i;
+ u8 sum = 0;
+
+ if (!buffer)
+ return 0;
+
+ for (i = 0; i < length; i++)
+ sum += buffer[i];
+
+ return (u8) (0 - sum);
+}
+
+/**
+ * ixgbe_host_interface_command - Issue command to manageability block
+ * @hw: pointer to the HW structure
+ * @buffer: contains the command to write and where the return status will
+ * be placed
+ * @lenght: lenght of buffer, must be multiple of 4 bytes
+ *
+ * Communicates with the manageability block. On success return 0
+ * else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
+ **/
+static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u8 *buffer,
+ u32 length)
+{
+ u32 hicr, i;
+ u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
+ u8 buf_len, dword_len;
+
+ s32 ret_val = 0;
+
+ if (length == 0 || length & 0x3 ||
+ length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
+ hw_dbg(hw, "Buffer length failure.\n");
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+
+ /* Check that the host interface is enabled. */
+ hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+ if ((hicr & IXGBE_HICR_EN) == 0) {
+ hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n");
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+
+ /* Calculate length in DWORDs */
+ dword_len = length >> 2;
+
+ /*
+ * The device driver writes the relevant command block
+ * into the ram area.
+ */
+ for (i = 0; i < dword_len; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
+ i, *((u32 *)buffer + i));
+
+ /* Setting this bit tells the ARC that a new command is pending. */
+ IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
+
+ for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) {
+ hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
+ if (!(hicr & IXGBE_HICR_C))
+ break;
+ usleep_range(1000, 2000);
+ }
+
+ /* Check command successful completion. */
+ if (i == IXGBE_HI_COMMAND_TIMEOUT ||
+ (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) {
+ hw_dbg(hw, "Command has failed with no status valid.\n");
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+
+ /* Calculate length in DWORDs */
+ dword_len = hdr_size >> 2;
+
+ /* first pull in the header so we know the buffer length */
+ for (i = 0; i < dword_len; i++)
+ *((u32 *)buffer + i) =
+ IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+
+ /* If there is any thing in data position pull it in */
+ buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
+ if (buf_len == 0)
+ goto out;
+
+ if (length < (buf_len + hdr_size)) {
+ hw_dbg(hw, "Buffer not large enough for reply message.\n");
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+ goto out;
+ }
+
+ /* Calculate length in DWORDs, add one for odd lengths */
+ dword_len = (buf_len + 1) >> 2;
+
+ /* Pull in the rest of the buffer (i is where we left off)*/
+ for (; i < buf_len; i++)
+ *((u32 *)buffer + i) =
+ IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
+ * @hw: pointer to the HW structure
+ * @maj: driver version major number
+ * @min: driver version minor number
+ * @build: driver version build number
+ * @sub: driver version sub build number
+ *
+ * Sends driver version number to firmware through the manageability
+ * block. On success return 0
+ * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
+ * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
+ **/
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+ u8 build, u8 sub)
+{
+ struct ixgbe_hic_drv_info fw_cmd;
+ int i;
+ s32 ret_val = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) {
+ ret_val = IXGBE_ERR_SWFW_SYNC;
+ goto out;
+ }
+
+ fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
+ fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
+ fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
+ fw_cmd.port_num = (u8)hw->bus.func;
+ fw_cmd.ver_maj = maj;
+ fw_cmd.ver_min = min;
+ fw_cmd.ver_build = build;
+ fw_cmd.ver_sub = sub;
+ fw_cmd.hdr.checksum = 0;
+ fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
+ (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
+ fw_cmd.pad = 0;
+ fw_cmd.pad2 = 0;
+
+ for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+ ret_val = ixgbe_host_interface_command(hw, (u8 *)&fw_cmd,
+ sizeof(fw_cmd));
+ if (ret_val != 0)
+ continue;
+
+ if (fw_cmd.hdr.cmd_or_resp.ret_status ==
+ FW_CEM_RESP_STATUS_SUCCESS)
+ ret_val = 0;
+ else
+ ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
+
+ break;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
+out:
+ return ret_val;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_COMMON_H_
+#define _IXGBE_COMMON_H_
+
+#include "ixgbe_type.h"
+#include "ixgbe.h"
+
+u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
+ u32 pba_num_size);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 *data);
+s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+ u16 words, u16 *data);
+u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+ u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
+ u32 enable_addr);
+s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
+ struct net_device *netdev);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
+s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
+s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
+
+s32 ixgbe_validate_mac_addr(u8 *mac_addr);
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask);
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask);
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
+s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
+s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+ u32 vind, bool vlan_on);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up, bool link_up_wait_to_complete);
+s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+ u16 *wwpn_prefix);
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
+void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
+s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
+s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
+ u8 build, u8 ver);
+
+void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
+ u32 headroom, int strategy);
+
+#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+
+#ifndef writeq
+#define writeq(val, addr) writel((u32) (val), addr); \
+ writel((u32) (val >> 32), (addr + 4));
+#endif
+
+#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
+
+#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
+
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\
+ writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
+
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\
+ readl((a)->hw_addr + (reg) + ((offset) << 2)))
+
+#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
+
+#define hw_dbg(hw, format, arg...) \
+ netdev_dbg(((struct ixgbe_adapter *)(hw->back))->netdev, format, ##arg)
+#define e_dev_info(format, arg...) \
+ dev_info(&adapter->pdev->dev, format, ## arg)
+#define e_dev_warn(format, arg...) \
+ dev_warn(&adapter->pdev->dev, format, ## arg)
+#define e_dev_err(format, arg...) \
+ dev_err(&adapter->pdev->dev, format, ## arg)
+#define e_dev_notice(format, arg...) \
+ dev_notice(&adapter->pdev->dev, format, ## arg)
+#define e_info(msglvl, format, arg...) \
+ netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_err(msglvl, format, arg...) \
+ netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_warn(msglvl, format, arg...) \
+ netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
+#define e_crit(msglvl, format, arg...) \
+ netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
+#endif /* IXGBE_COMMON */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_ieee_credits - This calculates the ieee traffic class
+ * credits from the configured bandwidth percentages. Credits
+ * are the smallest unit programmable into the underlying
+ * hardware. The IEEE 802.1Qaz specification do not use bandwidth
+ * groups so this is much simplified from the CEE case.
+ */
+s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, __u16 *max, int max_frame)
+{
+ int min_percent = 100;
+ int min_credit, multiplier;
+ int i;
+
+ min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
+ DCB_CREDIT_QUANTUM;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ if (bw[i] < min_percent && bw[i])
+ min_percent = bw[i];
+ }
+
+ multiplier = (min_credit / min_percent) + 1;
+
+ /* Find out the hw credits for each TC */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ int val = min(bw[i] * multiplier, MAX_CREDIT_REFILL);
+
+ if (val < min_credit)
+ val = min_credit;
+ refill[i] = val;
+
+ max[i] = bw[i] ? (bw[i] * MAX_CREDIT)/100 : min_credit;
+ }
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits
+ * @ixgbe_dcb_config: Struct containing DCB settings.
+ * @direction: Configuring either Tx or Rx.
+ *
+ * This function calculates the credits allocated to each traffic class.
+ * It should be called only after the rules are checked by
+ * ixgbe_dcb_check_config().
+ */
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config,
+ int max_frame, u8 direction)
+{
+ struct tc_bw_alloc *p;
+ int min_credit;
+ int min_multiplier;
+ int min_percent = 100;
+ s32 ret_val = 0;
+ /* Initialization values default for Tx settings */
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u16 link_percentage = 0;
+ u8 bw_percent = 0;
+ u8 i;
+
+ if (dcb_config == NULL) {
+ ret_val = DCB_ERR_CONFIG;
+ goto out;
+ }
+
+ min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
+ DCB_CREDIT_QUANTUM;
+
+ /* Find smallest link percentage */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ p = &dcb_config->tc_config[i].path[direction];
+ bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+ link_percentage = p->bwg_percent;
+
+ link_percentage = (link_percentage * bw_percent) / 100;
+
+ if (link_percentage && link_percentage < min_percent)
+ min_percent = link_percentage;
+ }
+
+ /*
+ * The ratio between traffic classes will control the bandwidth
+ * percentages seen on the wire. To calculate this ratio we use
+ * a multiplier. It is required that the refill credits must be
+ * larger than the max frame size so here we find the smallest
+ * multiplier that will allow all bandwidth percentages to be
+ * greater than the max frame size.
+ */
+ min_multiplier = (min_credit / min_percent) + 1;
+
+ /* Find out the link percentage for each TC first */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ p = &dcb_config->tc_config[i].path[direction];
+ bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
+
+ link_percentage = p->bwg_percent;
+ /* Must be careful of integer division for very small nums */
+ link_percentage = (link_percentage * bw_percent) / 100;
+ if (p->bwg_percent > 0 && link_percentage == 0)
+ link_percentage = 1;
+
+ /* Save link_percentage for reference */
+ p->link_percent = (u8)link_percentage;
+
+ /* Calculate credit refill ratio using multiplier */
+ credit_refill = min(link_percentage * min_multiplier,
+ MAX_CREDIT_REFILL);
+ p->data_credits_refill = (u16)credit_refill;
+
+ /* Calculate maximum credit for the TC */
+ credit_max = (link_percentage * MAX_CREDIT) / 100;
+
+ /*
+ * Adjustment based on rule checking, if the percentage
+ * of a TC is too small, the maximum credit may not be
+ * enough to send out a jumbo frame in data plane arbitration.
+ */
+ if (credit_max && (credit_max < min_credit))
+ credit_max = min_credit;
+
+ if (direction == DCB_TX_CONFIG) {
+ /*
+ * Adjustment based on rule checking, if the
+ * percentage of a TC is too small, the maximum
+ * credit may not be enough to send out a TSO
+ * packet in descriptor plane arbitration.
+ */
+ if ((hw->mac.type == ixgbe_mac_82598EB) &&
+ credit_max &&
+ (credit_max < MINIMUM_CREDIT_FOR_TSO))
+ credit_max = MINIMUM_CREDIT_FOR_TSO;
+
+ dcb_config->tc_config[i].desc_credits_max =
+ (u16)credit_max;
+ }
+
+ p->data_credits_max = (u16)credit_max;
+ }
+
+out:
+ return ret_val;
+}
+
+void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en)
+{
+ int i;
+
+ *pfc_en = 0;
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ *pfc_en |= (cfg->tc_config[i].dcb_pfc & 0xF) << i;
+}
+
+void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *cfg, int direction,
+ u16 *refill)
+{
+ struct tc_bw_alloc *p;
+ int i;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ p = &cfg->tc_config[i].path[direction];
+ refill[i] = p->data_credits_refill;
+ }
+}
+
+void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max)
+{
+ int i;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ max[i] = cfg->tc_config[i].desc_credits_max;
+}
+
+void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *cfg, int direction,
+ u8 *bwgid)
+{
+ struct tc_bw_alloc *p;
+ int i;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ p = &cfg->tc_config[i].path[direction];
+ bwgid[i] = p->bwg_id;
+ }
+}
+
+void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *cfg, int direction,
+ u8 *ptype)
+{
+ struct tc_bw_alloc *p;
+ int i;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ p = &cfg->tc_config[i].path[direction];
+ ptype[i] = p->prio_type;
+ }
+}
+
+/**
+ * ixgbe_dcb_hw_config - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw,
+ struct ixgbe_dcb_config *dcb_config)
+{
+ s32 ret = 0;
+ u8 pfc_en;
+ u8 ptype[MAX_TRAFFIC_CLASS];
+ u8 bwgid[MAX_TRAFFIC_CLASS];
+ u16 refill[MAX_TRAFFIC_CLASS];
+ u16 max[MAX_TRAFFIC_CLASS];
+ /* CEE does not define a priority to tc mapping so map 1:1 */
+ u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+ /* Unpack CEE standard containers */
+ ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en);
+ ixgbe_dcb_unpack_refill(dcb_config, DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max(dcb_config, max);
+ ixgbe_dcb_unpack_bwgid(dcb_config, DCB_TX_CONFIG, bwgid);
+ ixgbe_dcb_unpack_prio(dcb_config, DCB_TX_CONFIG, ptype);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_hw_config_82598(hw, pfc_en, refill, max,
+ bwgid, ptype);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ ret = ixgbe_dcb_hw_config_82599(hw, pfc_en, refill, max,
+ bwgid, ptype, prio_tc);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+/* Helper routines to abstract HW specifics from DCB netlink ops */
+s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en)
+{
+ int ret = -EINVAL;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en);
+ break;
+ default:
+ break;
+ }
+ return ret;
+}
+
+s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw,
+ u16 *refill, u16 *max, u8 *bwg_id,
+ u8 *prio_type, u8 *prio_tc)
+{
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max,
+ prio_type);
+ ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+ bwg_id, prio_type);
+ ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+ bwg_id, prio_type);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max,
+ bwg_id, prio_type, prio_tc);
+ ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+ bwg_id, prio_type);
+ ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
+ prio_type, prio_tc);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_CONFIG_H_
+#define _DCB_CONFIG_H_
+
+#include "ixgbe_type.h"
+
+/* DCB data structures */
+
+#define IXGBE_MAX_PACKET_BUFFERS 8
+#define MAX_USER_PRIORITY 8
+#define MAX_TRAFFIC_CLASS 8
+#define MAX_BW_GROUP 8
+#define BW_PERCENT 100
+
+#define DCB_TX_CONFIG 0
+#define DCB_RX_CONFIG 1
+
+/* DCB error Codes */
+#define DCB_SUCCESS 0
+#define DCB_ERR_CONFIG -1
+#define DCB_ERR_PARAM -2
+
+/* Transmit and receive Errors */
+/* Error in bandwidth group allocation */
+#define DCB_ERR_BW_GROUP -3
+/* Error in traffic class bandwidth allocation */
+#define DCB_ERR_TC_BW -4
+/* Traffic class has both link strict and group strict enabled */
+#define DCB_ERR_LS_GS -5
+/* Link strict traffic class has non zero bandwidth */
+#define DCB_ERR_LS_BW_NONZERO -6
+/* Link strict bandwidth group has non zero bandwidth */
+#define DCB_ERR_LS_BWG_NONZERO -7
+/* Traffic class has zero bandwidth */
+#define DCB_ERR_TC_BW_ZERO -8
+
+#define DCB_NOT_IMPLEMENTED 0x7FFFFFFF
+
+struct dcb_pfc_tc_debug {
+ u8 tc;
+ u8 pause_status;
+ u64 pause_quanta;
+};
+
+enum strict_prio_type {
+ prio_none = 0,
+ prio_group,
+ prio_link
+};
+
+/* DCB capability definitions */
+#define IXGBE_DCB_PG_SUPPORT 0x00000001
+#define IXGBE_DCB_PFC_SUPPORT 0x00000002
+#define IXGBE_DCB_BCN_SUPPORT 0x00000004
+#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008
+#define IXGBE_DCB_GSP_SUPPORT 0x00000010
+
+#define IXGBE_DCB_8_TC_SUPPORT 0x80
+
+struct dcb_support {
+ /* DCB capabilities */
+ u32 capabilities;
+
+ /* Each bit represents a number of TCs configurable in the hw.
+ * If 8 traffic classes can be configured, the value is 0x80.
+ */
+ u8 traffic_classes;
+ u8 pfc_traffic_classes;
+};
+
+/* Traffic class bandwidth allocation per direction */
+struct tc_bw_alloc {
+ u8 bwg_id; /* Bandwidth Group (BWG) ID */
+ u8 bwg_percent; /* % of BWG's bandwidth */
+ u8 link_percent; /* % of link bandwidth */
+ u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */
+ u16 data_credits_refill; /* Credit refill amount in 64B granularity */
+ u16 data_credits_max; /* Max credits for a configured packet buffer
+ * in 64B granularity.*/
+ enum strict_prio_type prio_type; /* Link or Group Strict Priority */
+};
+
+enum dcb_pfc_type {
+ pfc_disabled = 0,
+ pfc_enabled_full,
+ pfc_enabled_tx,
+ pfc_enabled_rx
+};
+
+/* Traffic class configuration */
+struct tc_configuration {
+ struct tc_bw_alloc path[2]; /* One each for Tx/Rx */
+ enum dcb_pfc_type dcb_pfc; /* Class based flow control setting */
+
+ u16 desc_credits_max; /* For Tx Descriptor arbitration */
+ u8 tc; /* Traffic class (TC) */
+};
+
+struct dcb_num_tcs {
+ u8 pg_tcs;
+ u8 pfc_tcs;
+};
+
+struct ixgbe_dcb_config {
+ struct dcb_support support;
+ struct dcb_num_tcs num_tcs;
+ struct tc_configuration tc_config[MAX_TRAFFIC_CLASS];
+ u8 bw_percentage[2][MAX_BW_GROUP]; /* One each for Tx/Rx */
+ bool pfc_mode_enable;
+
+ u32 dcb_cfg_version; /* Not used...OS-specific? */
+ u32 link_speed; /* For bandwidth allocation validation purpose */
+};
+
+/* DCB driver APIs */
+void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en);
+void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *, int, u16 *);
+void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *, u16 *);
+void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *, int, u8 *);
+void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *, int, u8 *);
+
+/* DCB credits calculation */
+s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, __u16 *max, int max_frame);
+s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *,
+ struct ixgbe_dcb_config *, int, u8);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, u16 *refill, u16 *max,
+ u8 *bwg_id, u8 *prio_type, u8 *tc_prio);
+s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en);
+s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, struct ixgbe_dcb_config *);
+
+/* DCB definitions for credit calculation */
+#define DCB_CREDIT_QUANTUM 64 /* DCB Quantum */
+#define MAX_CREDIT_REFILL 511 /* 0x1FF * 64B = 32704B */
+#define DCB_MAX_TSO_SIZE (32*1024) /* MAX TSO packet size supported in DCB mode */
+#define MINIMUM_CREDIT_FOR_TSO (DCB_MAX_TSO_SIZE/64 + 1) /* 513 for 32KB TSO packet */
+#define MAX_CREDIT 4095 /* Maximum credit supported: 256KB * 1204 / 64B */
+
+#endif /* _DCB_CONFIG_H */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82598.h"
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Rx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *prio_type)
+{
+ u32 reg = 0;
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u8 i = 0;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
+ IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ /* Enable Arbiter */
+ reg &= ~IXGBE_RMCS_ARBDIS;
+ /* Enable Receive Recycle within the BWG */
+ reg |= IXGBE_RMCS_RRM;
+ /* Enable Deficit Fixed Priority arbitration*/
+ reg |= IXGBE_RMCS_DFP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ credit_refill = refill[i];
+ credit_max = max[i];
+
+ reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_RT2CR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
+ }
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ reg |= IXGBE_RDRXCTL_RDMTS_1_2;
+ reg |= IXGBE_RDRXCTL_MPBEN;
+ reg |= IXGBE_RDRXCTL_MCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ /* Make sure there is enough descriptors before arbitration */
+ reg &= ~IXGBE_RXCTRL_DMBYPS;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type)
+{
+ u32 reg, max_credits;
+ u8 i;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+
+ /* Enable arbiter */
+ reg &= ~IXGBE_DPMCS_ARBDIS;
+ /* Enable DFP and Recycle mode */
+ reg |= (IXGBE_DPMCS_TDPAC | IXGBE_DPMCS_TRM);
+ reg |= IXGBE_DPMCS_TSOEF;
+ /* Configure Max TSO packet size 34KB including payload and headers */
+ reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
+
+ IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ max_credits = max[i];
+ reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
+ reg |= refill[i];
+ reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
+
+ if (prio_type[i] == prio_group)
+ reg |= IXGBE_TDTQ2TCCR_GSP;
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_TDTQ2TCCR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Tx Data Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type)
+{
+ u32 reg;
+ u8 i;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
+ /* Enable Data Plane Arbiter */
+ reg &= ~IXGBE_PDPMCS_ARBDIS;
+ /* Enable DFP and Transmit Recycle Mode */
+ reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
+
+ IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ reg = refill[i];
+ reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
+ reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
+
+ if (prio_type[i] == prio_group)
+ reg |= IXGBE_TDPT2TCCR_GSP;
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_TDPT2TCCR_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
+ }
+
+ /* Enable Tx packet buffer division */
+ reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+ reg |= IXGBE_DTXCTL_ENDBUBD;
+ IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82598 - Config priority flow control
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure Priority Flow Control for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
+{
+ u32 reg, rx_pba_size;
+ u8 i;
+
+ if (pfc_en) {
+ /* Enable Transmit Priority Flow Control */
+ reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ reg &= ~IXGBE_RMCS_TFCE_802_3X;
+ /* correct the reporting of our flow control status */
+ reg |= IXGBE_RMCS_TFCE_PRIORITY;
+ IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
+
+ /* Enable Receive Priority Flow Control */
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ reg &= ~IXGBE_FCTRL_RFCE;
+ reg |= IXGBE_FCTRL_RPFCE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
+
+ /* Configure pause time */
+ for (i = 0; i < (MAX_TRAFFIC_CLASS >> 1); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), 0x68006800);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
+ }
+
+ /*
+ * Configure flow control thresholds and enable priority flow control
+ * for each traffic class.
+ */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ int enabled = pfc_en & (1 << i);
+ rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+ rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+ reg = (rx_pba_size - hw->fc.low_water) << 10;
+
+ if (enabled == pfc_enabled_tx ||
+ enabled == pfc_enabled_full)
+ reg |= IXGBE_FCRTL_XONE;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
+
+ reg = (rx_pba_size - hw->fc.high_water) << 10;
+ if (enabled == pfc_enabled_tx ||
+ enabled == pfc_enabled_full)
+ reg |= IXGBE_FCRTH_FCEN;
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
+{
+ u32 reg = 0;
+ u8 i = 0;
+ u8 j = 0;
+
+ /* Receive Queues stats setting - 8 queues per statistics reg */
+ for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
+ reg |= ((0x1010101) * j);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+ reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
+ reg |= ((0x1010101) * j);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
+ }
+ /* Transmit Queues stats setting - 4 queues per statistics reg */
+ for (i = 0; i < 8; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
+ reg |= ((0x1010101) * i);
+ IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82598 - Config and enable DCB
+ * @hw: pointer to hardware structure
+ * @dcb_config: pointer to ixgbe_dcb_config structure
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *prio_type)
+{
+ ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type);
+ ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
+ bwg_id, prio_type);
+ ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
+ bwg_id, prio_type);
+ ixgbe_dcb_config_pfc_82598(hw, pfc_en);
+ ixgbe_dcb_config_tc_stats_82598(hw);
+
+ return 0;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_82598_CONFIG_H_
+#define _DCB_82598_CONFIG_H_
+
+/* DCB register definitions */
+
+#define IXGBE_DPMCS_MTSOS_SHIFT 16
+#define IXGBE_DPMCS_TDPAC 0x00000001 /* 0 Round Robin, 1 DFP - Deficit Fixed Priority */
+#define IXGBE_DPMCS_TRM 0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_DPMCS_ARBDIS 0x00000040 /* DCB arbiter disable */
+#define IXGBE_DPMCS_TSOEF 0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */
+
+#define IXGBE_RUPPBMR_MQA 0x80000000 /* Enable UP to queue mapping */
+
+#define IXGBE_RT2CR_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RT2CR_LSP 0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet buffers enable */
+#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores (RSS) enable */
+
+#define IXGBE_TDTQ2TCCR_MCL_SHIFT 12
+#define IXGBE_TDTQ2TCCR_BWG_SHIFT 9
+#define IXGBE_TDTQ2TCCR_GSP 0x40000000
+#define IXGBE_TDTQ2TCCR_LSP 0x80000000
+
+#define IXGBE_TDPT2TCCR_MCL_SHIFT 12
+#define IXGBE_TDPT2TCCR_BWG_SHIFT 9
+#define IXGBE_TDPT2TCCR_GSP 0x40000000
+#define IXGBE_TDPT2TCCR_LSP 0x80000000
+
+#define IXGBE_PDPMCS_TPPAC 0x00000020 /* 0 Round Robin, 1 for DFP - Deficit Fixed Priority */
+#define IXGBE_PDPMCS_ARBDIS 0x00000040 /* Arbiter disable */
+#define IXGBE_PDPMCS_TRM 0x00000100 /* Transmit Recycle Mode enable */
+
+#define IXGBE_DTXCTL_ENDBUBD 0x00000004 /* Enable DBU buffer division */
+
+#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
+
+#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000
+
+/* DCB hardware-specific driver APIs */
+
+/* DCB PFC functions */
+s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8 pfc_en);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type);
+
+s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *prio_type);
+
+#endif /* _DCB_82598_CONFIG_H */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include "ixgbe_type.h"
+#include "ixgbe_dcb.h"
+#include "ixgbe_dcb_82599.h"
+
+/**
+ * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Rx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type,
+ u8 *prio_tc)
+{
+ u32 reg = 0;
+ u32 credit_refill = 0;
+ u32 credit_max = 0;
+ u8 i = 0;
+
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; WSP)
+ */
+ reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+ /* Map all traffic classes to their UP, 1 to 1 */
+ reg = 0;
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ reg |= (prio_tc[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
+ IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ credit_refill = refill[i];
+ credit_max = max[i];
+ reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
+
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_RTRPT4C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
+ }
+
+ /*
+ * Configure Rx packet plane (recycle mode; WSP) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
+ IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Tx Descriptor Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type)
+{
+ u32 reg, max_credits;
+ u8 i;
+
+ /* Clear the per-Tx queue credits; we use per-TC instead */
+ for (i = 0; i < 128; i++) {
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
+ }
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ max_credits = max[i];
+ reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
+ reg |= refill[i];
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
+
+ if (prio_type[i] == prio_group)
+ reg |= IXGBE_RTTDT2C_GSP;
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_RTTDT2C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
+ }
+
+ /*
+ * Configure Tx descriptor plane (recycle mode; WSP) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ *
+ * Configure Tx Packet Arbiter and credits for each traffic class.
+ */
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type,
+ u8 *prio_tc)
+{
+ u32 reg;
+ u8 i;
+
+ /*
+ * Disable the arbiter before changing parameters
+ * (always enable recycle mode; SP; arb delay)
+ */
+ reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+ (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
+ IXGBE_RTTPCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+ /* Map all traffic classes to their UP, 1 to 1 */
+ reg = 0;
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ reg |= (prio_tc[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
+ IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
+
+ /* Configure traffic class credits and priority */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ reg = refill[i];
+ reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
+ reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
+
+ if (prio_type[i] == prio_group)
+ reg |= IXGBE_RTTPT2C_GSP;
+
+ if (prio_type[i] == prio_link)
+ reg |= IXGBE_RTTPT2C_LSP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
+ }
+
+ /*
+ * Configure Tx packet plane (recycle mode; SP; arb delay) and
+ * enable arbiter
+ */
+ reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
+ (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
+ IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_pfc_82599 - Configure priority flow control
+ * @hw: pointer to hardware structure
+ * @pfc_en: enabled pfc bitmask
+ *
+ * Configure Priority Flow Control (PFC) for each traffic class.
+ */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
+{
+ u32 i, reg, rx_pba_size;
+
+ /* Configure PFC Tx thresholds per TC */
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ int enabled = pfc_en & (1 << i);
+ rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+ rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
+
+ reg = (rx_pba_size - hw->fc.low_water) << 10;
+
+ if (enabled)
+ reg |= IXGBE_FCRTL_XONE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
+
+ reg = (rx_pba_size - hw->fc.high_water) << 10;
+ if (enabled)
+ reg |= IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
+ }
+
+ if (pfc_en) {
+ /* Configure pause time (2 TCs per register) */
+ reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
+ for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
+ IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
+
+ /* Configure flow control refresh threshold value */
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
+
+
+ reg = IXGBE_FCCFG_TFCE_PRIORITY;
+ IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg);
+ /*
+ * Enable Receive PFC
+ * 82599 will always honor XOFF frames we receive when
+ * we are in PFC mode however X540 only honors enabled
+ * traffic classes.
+ */
+ reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ reg &= ~IXGBE_MFLCN_RFCE;
+ reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
+
+ if (hw->mac.type == ixgbe_mac_X540)
+ reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
+
+ } else {
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ hw->mac.ops.fc_enable(hw, i);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
+ * @hw: pointer to hardware structure
+ *
+ * Configure queue statistics registers, all queues belonging to same traffic
+ * class uses a single set of queue statistics counters.
+ */
+static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
+{
+ u32 reg = 0;
+ u8 i = 0;
+
+ /*
+ * Receive Queues stats setting
+ * 32 RQSMR registers, each configuring 4 queues.
+ * Set all 16 queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ */
+ for (i = 0; i < 32; i++) {
+ reg = 0x01010101 * (i / 4);
+ IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
+ }
+ /*
+ * Transmit Queues stats setting
+ * 32 TQSM registers, each controlling 4 queues.
+ * Set all queues of each TC to the same stat
+ * with TC 'n' going to stat 'n'.
+ * Tx queues are allocated non-uniformly to TCs:
+ * 32, 32, 16, 16, 8, 8, 8, 8.
+ */
+ for (i = 0; i < 32; i++) {
+ if (i < 8)
+ reg = 0x00000000;
+ else if (i < 16)
+ reg = 0x01010101;
+ else if (i < 20)
+ reg = 0x02020202;
+ else if (i < 24)
+ reg = 0x03030303;
+ else if (i < 26)
+ reg = 0x04040404;
+ else if (i < 28)
+ reg = 0x05050505;
+ else if (i < 30)
+ reg = 0x06060606;
+ else
+ reg = 0x07070707;
+ IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
+ * @hw: pointer to hardware structure
+ * @refill: refill credits index by traffic class
+ * @max: max credits index by traffic class
+ * @bwg_id: bandwidth grouping indexed by traffic class
+ * @prio_type: priority type indexed by traffic class
+ * @pfc_en: enabled pfc bitmask
+ *
+ * Configure dcb settings and enable dcb mode.
+ */
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *prio_type, u8 *prio_tc)
+{
+ ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
+ prio_type, prio_tc);
+ ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
+ bwg_id, prio_type);
+ ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
+ bwg_id, prio_type, prio_tc);
+ ixgbe_dcb_config_pfc_82599(hw, pfc_en);
+ ixgbe_dcb_config_tc_stats_82599(hw);
+
+ return 0;
+}
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _DCB_82599_CONFIG_H_
+#define _DCB_82599_CONFIG_H_
+
+/* DCB register definitions */
+#define IXGBE_RTTDCS_TDPAC 0x00000001 /* 0 Round Robin,
+ * 1 WSP - Weighted Strict Priority
+ */
+#define IXGBE_RTTDCS_VMPAC 0x00000002 /* 0 Round Robin,
+ * 1 WRR - Weighted Round Robin
+ */
+#define IXGBE_RTTDCS_TDRM 0x00000010 /* Transmit Recycle Mode */
+#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTDCS_BDPM 0x00400000 /* Bypass Data Pipe - must clear! */
+#define IXGBE_RTTDCS_BPBFSM 0x00800000 /* Bypass PB Free Space - must
+ * clear!
+ */
+#define IXGBE_RTTDCS_SPEED_CHG 0x80000000 /* Link speed change */
+
+/* Receive UP2TC mapping */
+#define IXGBE_RTRUP2TC_UP_SHIFT 3
+/* Transmit UP2TC mapping */
+#define IXGBE_RTTUP2TC_UP_SHIFT 3
+
+#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
+#define IXGBE_RTRPT4C_BWG_SHIFT 9 /* Offset to BWG index */
+#define IXGBE_RTRPT4C_GSP 0x40000000 /* GSP enable bit */
+#define IXGBE_RTRPT4C_LSP 0x80000000 /* LSP enable bit */
+
+#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet
+ * buffers enable
+ */
+#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores
+ * (RSS) enable
+ */
+
+/* RTRPCS Bit Masks */
+#define IXGBE_RTRPCS_RRM 0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RTRPCS_RAC 0x00000004
+#define IXGBE_RTRPCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+
+/* RTTDT2C Bit Masks */
+#define IXGBE_RTTDT2C_MCL_SHIFT 12
+#define IXGBE_RTTDT2C_BWG_SHIFT 9
+#define IXGBE_RTTDT2C_GSP 0x40000000
+#define IXGBE_RTTDT2C_LSP 0x80000000
+
+#define IXGBE_RTTPT2C_MCL_SHIFT 12
+#define IXGBE_RTTPT2C_BWG_SHIFT 9
+#define IXGBE_RTTPT2C_GSP 0x40000000
+#define IXGBE_RTTPT2C_LSP 0x80000000
+
+/* RTTPCS Bit Masks */
+#define IXGBE_RTTPCS_TPPAC 0x00000020 /* 0 Round Robin,
+ * 1 SP - Strict Priority
+ */
+#define IXGBE_RTTPCS_ARBDIS 0x00000040 /* Arbiter disable */
+#define IXGBE_RTTPCS_TPRM 0x00000100 /* Transmit Recycle Mode enable */
+#define IXGBE_RTTPCS_ARBD_SHIFT 22
+#define IXGBE_RTTPCS_ARBD_DCB 0x4 /* Arbitration delay in DCB mode */
+
+/* SECTXMINIFG DCB */
+#define IXGBE_SECTX_DCB 0x00001F00 /* DCB TX Buffer IFG */
+
+
+/* DCB hardware-specific driver APIs */
+
+/* DCB PFC functions */
+s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en);
+
+/* DCB hw initialization */
+s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type,
+ u8 *prio_tc);
+
+s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type);
+
+s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
+ u16 *refill,
+ u16 *max,
+ u8 *bwg_id,
+ u8 *prio_type,
+ u8 *prio_tc);
+
+s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
+ u16 *max, u8 *bwg_id, u8 *prio_type,
+ u8 *prio_tc);
+
+#endif /* _DCB_82599_CONFIG_H */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <linux.nics@intel.com>
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include <linux/dcbnl.h>
+#include "ixgbe_dcb_82598.h"
+#include "ixgbe_dcb_82599.h"
+
+/* Callbacks for DCB netlink in the kernel */
+#define BIT_DCB_MODE 0x01
+#define BIT_PFC 0x02
+#define BIT_PG_RX 0x04
+#define BIT_PG_TX 0x08
+#define BIT_APP_UPCHG 0x10
+#define BIT_LINKSPEED 0x80
+
+/* Responses for the DCB_C_SET_ALL command */
+#define DCB_HW_CHG_RST 0 /* DCB configuration changed with reset */
+#define DCB_NO_HW_CHG 1 /* DCB configuration did not change */
+#define DCB_HW_CHG 2 /* DCB configuration changed, no reset */
+
+int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
+ struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max)
+{
+ struct tc_configuration *src_tc_cfg = NULL;
+ struct tc_configuration *dst_tc_cfg = NULL;
+ int i;
+
+ if (!src_dcb_cfg || !dst_dcb_cfg)
+ return -EINVAL;
+
+ for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) {
+ src_tc_cfg = &src_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0];
+ dst_tc_cfg = &dst_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0];
+
+ dst_tc_cfg->path[DCB_TX_CONFIG].prio_type =
+ src_tc_cfg->path[DCB_TX_CONFIG].prio_type;
+
+ dst_tc_cfg->path[DCB_TX_CONFIG].bwg_id =
+ src_tc_cfg->path[DCB_TX_CONFIG].bwg_id;
+
+ dst_tc_cfg->path[DCB_TX_CONFIG].bwg_percent =
+ src_tc_cfg->path[DCB_TX_CONFIG].bwg_percent;
+
+ dst_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap =
+ src_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap;
+
+ dst_tc_cfg->path[DCB_RX_CONFIG].prio_type =
+ src_tc_cfg->path[DCB_RX_CONFIG].prio_type;
+
+ dst_tc_cfg->path[DCB_RX_CONFIG].bwg_id =
+ src_tc_cfg->path[DCB_RX_CONFIG].bwg_id;
+
+ dst_tc_cfg->path[DCB_RX_CONFIG].bwg_percent =
+ src_tc_cfg->path[DCB_RX_CONFIG].bwg_percent;
+
+ dst_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap =
+ src_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap;
+ }
+
+ for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) {
+ dst_dcb_cfg->bw_percentage[DCB_TX_CONFIG]
+ [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage
+ [DCB_TX_CONFIG][i-DCB_PG_ATTR_BW_ID_0];
+ dst_dcb_cfg->bw_percentage[DCB_RX_CONFIG]
+ [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage
+ [DCB_RX_CONFIG][i-DCB_PG_ATTR_BW_ID_0];
+ }
+
+ for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) {
+ dst_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc =
+ src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc;
+ }
+
+ dst_dcb_cfg->pfc_mode_enable = src_dcb_cfg->pfc_mode_enable;
+
+ return 0;
+}
+
+static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
+}
+
+static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
+{
+ u8 err = 0;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ /* verify there is something to do, if not then exit */
+ if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+ return err;
+
+ if (state > 0) {
+ /* Turn on DCB */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+ e_err(drv, "Enable failed, needs MSI-X\n");
+ err = 1;
+ goto out;
+ }
+
+ adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ adapter->last_lfc_mode = adapter->hw.fc.current_mode;
+ adapter->hw.fc.requested_mode = ixgbe_fc_none;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ break;
+ default:
+ break;
+ }
+
+ ixgbe_setup_tc(netdev, MAX_TRAFFIC_CLASS);
+ } else {
+ /* Turn off DCB */
+ adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+ adapter->temp_dcb_cfg.pfc_mode_enable = false;
+ adapter->dcb_cfg.pfc_mode_enable = false;
+ adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ break;
+ default:
+ break;
+ }
+ ixgbe_setup_tc(netdev, 0);
+ }
+
+out:
+ return err;
+}
+
+static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
+ u8 *perm_addr)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i, j;
+
+ memset(perm_addr, 0xff, MAX_ADDR_LEN);
+
+ for (i = 0; i < netdev->addr_len; i++)
+ perm_addr[i] = adapter->hw.mac.perm_addr[i];
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ for (j = 0; j < netdev->addr_len; j++, i++)
+ perm_addr[i] = adapter->hw.mac.san_addr[j];
+ break;
+ default:
+ break;
+ }
+}
+
+static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
+ u8 prio, u8 bwg_id, u8 bw_pct,
+ u8 up_map)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (prio != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type = prio;
+ if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id = bwg_id;
+ if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent =
+ bw_pct;
+ if (up_map != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap =
+ up_map;
+
+ if ((adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type !=
+ adapter->dcb_cfg.tc_config[tc].path[0].prio_type) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id !=
+ adapter->dcb_cfg.tc_config[tc].path[0].bwg_id) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent !=
+ adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap !=
+ adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap))
+ adapter->dcb_set_bitmap |= BIT_PG_TX;
+}
+
+static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
+ u8 bw_pct)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct;
+
+ if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
+ adapter->dcb_cfg.bw_percentage[0][bwg_id])
+ adapter->dcb_set_bitmap |= BIT_PG_TX;
+}
+
+static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
+ u8 prio, u8 bwg_id, u8 bw_pct,
+ u8 up_map)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (prio != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type = prio;
+ if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id = bwg_id;
+ if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent =
+ bw_pct;
+ if (up_map != DCB_ATTR_VALUE_UNDEFINED)
+ adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap =
+ up_map;
+
+ if ((adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type !=
+ adapter->dcb_cfg.tc_config[tc].path[1].prio_type) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id !=
+ adapter->dcb_cfg.tc_config[tc].path[1].bwg_id) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent !=
+ adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) ||
+ (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap !=
+ adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap))
+ adapter->dcb_set_bitmap |= BIT_PG_RX;
+}
+
+static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
+ u8 bw_pct)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct;
+
+ if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] !=
+ adapter->dcb_cfg.bw_percentage[1][bwg_id])
+ adapter->dcb_set_bitmap |= BIT_PG_RX;
+}
+
+static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc,
+ u8 *prio, u8 *bwg_id, u8 *bw_pct,
+ u8 *up_map)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ *prio = adapter->dcb_cfg.tc_config[tc].path[0].prio_type;
+ *bwg_id = adapter->dcb_cfg.tc_config[tc].path[0].bwg_id;
+ *bw_pct = adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent;
+ *up_map = adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap;
+}
+
+static void ixgbe_dcbnl_get_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
+ u8 *bw_pct)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ *bw_pct = adapter->dcb_cfg.bw_percentage[0][bwg_id];
+}
+
+static void ixgbe_dcbnl_get_pg_tc_cfg_rx(struct net_device *netdev, int tc,
+ u8 *prio, u8 *bwg_id, u8 *bw_pct,
+ u8 *up_map)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ *prio = adapter->dcb_cfg.tc_config[tc].path[1].prio_type;
+ *bwg_id = adapter->dcb_cfg.tc_config[tc].path[1].bwg_id;
+ *bw_pct = adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent;
+ *up_map = adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap;
+}
+
+static void ixgbe_dcbnl_get_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
+ u8 *bw_pct)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ *bw_pct = adapter->dcb_cfg.bw_percentage[1][bwg_id];
+}
+
+static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority,
+ u8 setting)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting;
+ if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc !=
+ adapter->dcb_cfg.tc_config[priority].dcb_pfc) {
+ adapter->dcb_set_bitmap |= BIT_PFC;
+ adapter->temp_dcb_cfg.pfc_mode_enable = true;
+ }
+}
+
+static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority,
+ u8 *setting)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc;
+}
+
+static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int ret;
+#ifdef IXGBE_FCOE
+ struct dcb_app app = {
+ .selector = DCB_APP_IDTYPE_ETHTYPE,
+ .protocol = ETH_P_FCOE,
+ };
+ u8 up = dcb_getapp(netdev, &app);
+#endif
+
+ ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+ MAX_TRAFFIC_CLASS);
+ if (ret)
+ return DCB_NO_HW_CHG;
+
+#ifdef IXGBE_FCOE
+ if (up && (up != (1 << adapter->fcoe.up)))
+ adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
+
+ /*
+ * Only take down the adapter if an app change occurred. FCoE
+ * may shuffle tx rings in this case and this can not be done
+ * without a reset currently.
+ */
+ if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
+ while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ adapter->fcoe.up = ffs(up) - 1;
+
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+ ixgbe_clear_interrupt_scheme(adapter);
+ }
+#endif
+
+ if (adapter->dcb_cfg.pfc_mode_enable) {
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ if (adapter->hw.fc.current_mode != ixgbe_fc_pfc)
+ adapter->last_lfc_mode =
+ adapter->hw.fc.current_mode;
+ break;
+ default:
+ break;
+ }
+ adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
+ } else {
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ adapter->hw.fc.requested_mode = ixgbe_fc_none;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
+ break;
+ default:
+ break;
+ }
+ }
+
+#ifdef IXGBE_FCOE
+ if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
+ ixgbe_init_interrupt_scheme(adapter);
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ ret = DCB_HW_CHG_RST;
+ }
+#endif
+
+ if (adapter->dcb_set_bitmap & BIT_PFC) {
+ u8 pfc_en;
+ ixgbe_dcb_unpack_pfc(&adapter->dcb_cfg, &pfc_en);
+ ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc_en);
+ ret = DCB_HW_CHG;
+ }
+
+ if (adapter->dcb_set_bitmap & (BIT_PG_TX|BIT_PG_RX)) {
+ u16 refill[MAX_TRAFFIC_CLASS], max[MAX_TRAFFIC_CLASS];
+ u8 bwg_id[MAX_TRAFFIC_CLASS], prio_type[MAX_TRAFFIC_CLASS];
+ /* Priority to TC mapping in CEE case default to 1:1 */
+ u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
+ int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+#ifdef CONFIG_FCOE
+ if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+ max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+
+ ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg,
+ max_frame, DCB_TX_CONFIG);
+ ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg,
+ max_frame, DCB_RX_CONFIG);
+
+ ixgbe_dcb_unpack_refill(&adapter->dcb_cfg,
+ DCB_TX_CONFIG, refill);
+ ixgbe_dcb_unpack_max(&adapter->dcb_cfg, max);
+ ixgbe_dcb_unpack_bwgid(&adapter->dcb_cfg,
+ DCB_TX_CONFIG, bwg_id);
+ ixgbe_dcb_unpack_prio(&adapter->dcb_cfg,
+ DCB_TX_CONFIG, prio_type);
+
+ ixgbe_dcb_hw_ets_config(&adapter->hw, refill, max,
+ bwg_id, prio_type, prio_tc);
+ }
+
+ if (adapter->dcb_cfg.pfc_mode_enable)
+ adapter->hw.fc.current_mode = ixgbe_fc_pfc;
+
+ if (adapter->dcb_set_bitmap & BIT_APP_UPCHG)
+ clear_bit(__IXGBE_RESETTING, &adapter->state);
+ adapter->dcb_set_bitmap = 0x00;
+ return ret;
+}
+
+static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ switch (capid) {
+ case DCB_CAP_ATTR_PG:
+ *cap = true;
+ break;
+ case DCB_CAP_ATTR_PFC:
+ *cap = true;
+ break;
+ case DCB_CAP_ATTR_UP2TC:
+ *cap = false;
+ break;
+ case DCB_CAP_ATTR_PG_TCS:
+ *cap = 0x80;
+ break;
+ case DCB_CAP_ATTR_PFC_TCS:
+ *cap = 0x80;
+ break;
+ case DCB_CAP_ATTR_GSP:
+ *cap = true;
+ break;
+ case DCB_CAP_ATTR_BCN:
+ *cap = false;
+ break;
+ case DCB_CAP_ATTR_DCBX:
+ *cap = adapter->dcbx_cap;
+ break;
+ default:
+ *cap = false;
+ break;
+ }
+
+ return 0;
+}
+
+static u8 ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ u8 rval = 0;
+
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ switch (tcid) {
+ case DCB_NUMTCS_ATTR_PG:
+ *num = MAX_TRAFFIC_CLASS;
+ break;
+ case DCB_NUMTCS_ATTR_PFC:
+ *num = MAX_TRAFFIC_CLASS;
+ break;
+ default:
+ rval = -EINVAL;
+ break;
+ }
+ } else {
+ rval = -EINVAL;
+ }
+
+ return rval;
+}
+
+static u8 ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num)
+{
+ return -EINVAL;
+}
+
+static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ return adapter->dcb_cfg.pfc_mode_enable;
+}
+
+static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ adapter->temp_dcb_cfg.pfc_mode_enable = state;
+ if (adapter->temp_dcb_cfg.pfc_mode_enable !=
+ adapter->dcb_cfg.pfc_mode_enable)
+ adapter->dcb_set_bitmap |= BIT_PFC;
+}
+
+/**
+ * ixgbe_dcbnl_getapp - retrieve the DCBX application user priority
+ * @netdev : the corresponding netdev
+ * @idtype : identifies the id as ether type or TCP/UDP port number
+ * @id: id is either ether type or TCP/UDP port number
+ *
+ * Returns : on success, returns a non-zero 802.1p user priority bitmap
+ * otherwise returns 0 as the invalid user priority bitmap to indicate an
+ * error.
+ */
+static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct dcb_app app = {
+ .selector = idtype,
+ .protocol = id,
+ };
+
+ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
+ return 0;
+
+ return dcb_getapp(netdev, &app);
+}
+
+static int ixgbe_dcbnl_ieee_getets(struct net_device *dev,
+ struct ieee_ets *ets)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets;
+
+ /* No IEEE PFC settings available */
+ if (!my_ets)
+ return -EINVAL;
+
+ ets->ets_cap = MAX_TRAFFIC_CLASS;
+ ets->cbs = my_ets->cbs;
+ memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
+ memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw));
+ memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
+ memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
+ return 0;
+}
+
+static int ixgbe_dcbnl_ieee_setets(struct net_device *dev,
+ struct ieee_ets *ets)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ __u16 refill[IEEE_8021QAZ_MAX_TCS], max[IEEE_8021QAZ_MAX_TCS];
+ __u8 prio_type[IEEE_8021QAZ_MAX_TCS];
+ int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ int i, err;
+ __u64 *p = (__u64 *) ets->prio_tc;
+ /* naively give each TC a bwg to map onto CEE hardware */
+ __u8 bwg_id[IEEE_8021QAZ_MAX_TCS] = {0, 1, 2, 3, 4, 5, 6, 7};
+
+ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+ return -EINVAL;
+
+ if (!adapter->ixgbe_ieee_ets) {
+ adapter->ixgbe_ieee_ets = kmalloc(sizeof(struct ieee_ets),
+ GFP_KERNEL);
+ if (!adapter->ixgbe_ieee_ets)
+ return -ENOMEM;
+ }
+
+ memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets));
+
+ /* Map TSA onto CEE prio type */
+ for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
+ switch (ets->tc_tsa[i]) {
+ case IEEE_8021QAZ_TSA_STRICT:
+ prio_type[i] = 2;
+ break;
+ case IEEE_8021QAZ_TSA_ETS:
+ prio_type[i] = 0;
+ break;
+ default:
+ /* Hardware only supports priority strict or
+ * ETS transmission selection algorithms if
+ * we receive some other value from dcbnl
+ * throw an error
+ */
+ return -EINVAL;
+ }
+ }
+
+ if (*p)
+ ixgbe_dcbnl_set_state(dev, 1);
+ else
+ ixgbe_dcbnl_set_state(dev, 0);
+
+ ixgbe_ieee_credits(ets->tc_tx_bw, refill, max, max_frame);
+ err = ixgbe_dcb_hw_ets_config(&adapter->hw, refill, max,
+ bwg_id, prio_type, ets->prio_tc);
+ return err;
+}
+
+static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev,
+ struct ieee_pfc *pfc)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc;
+ int i;
+
+ /* No IEEE PFC settings available */
+ if (!my_pfc)
+ return -EINVAL;
+
+ pfc->pfc_cap = MAX_TRAFFIC_CLASS;
+ pfc->pfc_en = my_pfc->pfc_en;
+ pfc->mbc = my_pfc->mbc;
+ pfc->delay = my_pfc->delay;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ pfc->requests[i] = adapter->stats.pxoffrxc[i];
+ pfc->indications[i] = adapter->stats.pxofftxc[i];
+ }
+
+ return 0;
+}
+
+static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev,
+ struct ieee_pfc *pfc)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int err;
+
+ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+ return -EINVAL;
+
+ if (!adapter->ixgbe_ieee_pfc) {
+ adapter->ixgbe_ieee_pfc = kmalloc(sizeof(struct ieee_pfc),
+ GFP_KERNEL);
+ if (!adapter->ixgbe_ieee_pfc)
+ return -ENOMEM;
+ }
+
+ memcpy(adapter->ixgbe_ieee_pfc, pfc, sizeof(*adapter->ixgbe_ieee_pfc));
+ err = ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en);
+ return err;
+}
+
+#ifdef IXGBE_FCOE
+static void ixgbe_dcbnl_devreset(struct net_device *dev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+
+ if (netif_running(dev))
+ dev->netdev_ops->ndo_stop(dev);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+ ixgbe_init_interrupt_scheme(adapter);
+
+ if (netif_running(dev))
+ dev->netdev_ops->ndo_open(dev);
+}
+#endif
+
+static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
+ struct dcb_app *app)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int err = -EINVAL;
+
+ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+ return err;
+
+ err = dcb_ieee_setapp(dev, app);
+
+#ifdef IXGBE_FCOE
+ if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+ app->protocol == ETH_P_FCOE) {
+ u8 app_mask = dcb_ieee_getapp_mask(dev, app);
+
+ if (app_mask & (1 << adapter->fcoe.up))
+ return err;
+
+ adapter->fcoe.up = app->priority;
+ ixgbe_dcbnl_devreset(dev);
+ }
+#endif
+ return 0;
+}
+
+static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev,
+ struct dcb_app *app)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int err;
+
+ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
+ return -EINVAL;
+
+ err = dcb_ieee_delapp(dev, app);
+
+#ifdef IXGBE_FCOE
+ if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
+ app->protocol == ETH_P_FCOE) {
+ u8 app_mask = dcb_ieee_getapp_mask(dev, app);
+
+ if (app_mask & (1 << adapter->fcoe.up))
+ return err;
+
+ adapter->fcoe.up = app_mask ?
+ ffs(app_mask) - 1 : IXGBE_FCOE_DEFTC;
+ ixgbe_dcbnl_devreset(dev);
+ }
+#endif
+ return err;
+}
+
+static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ return adapter->dcbx_cap;
+}
+
+static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ieee_ets ets = {0};
+ struct ieee_pfc pfc = {0};
+
+ /* no support for LLD_MANAGED modes or CEE+IEEE */
+ if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
+ ((mode & DCB_CAP_DCBX_VER_IEEE) && (mode & DCB_CAP_DCBX_VER_CEE)) ||
+ !(mode & DCB_CAP_DCBX_HOST))
+ return 1;
+
+ if (mode == adapter->dcbx_cap)
+ return 0;
+
+ adapter->dcbx_cap = mode;
+
+ /* ETS and PFC defaults */
+ ets.ets_cap = 8;
+ pfc.pfc_cap = 8;
+
+ if (mode & DCB_CAP_DCBX_VER_IEEE) {
+ ixgbe_dcbnl_ieee_setets(dev, &ets);
+ ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
+ } else if (mode & DCB_CAP_DCBX_VER_CEE) {
+ adapter->dcb_set_bitmap |= (BIT_PFC & BIT_PG_TX & BIT_PG_RX);
+ ixgbe_dcbnl_set_all(dev);
+ } else {
+ /* Drop into single TC mode strict priority as this
+ * indicates CEE and IEEE versions are disabled
+ */
+ ixgbe_dcbnl_ieee_setets(dev, &ets);
+ ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
+ ixgbe_dcbnl_set_state(dev, 0);
+ }
+
+ return 0;
+}
+
+const struct dcbnl_rtnl_ops dcbnl_ops = {
+ .ieee_getets = ixgbe_dcbnl_ieee_getets,
+ .ieee_setets = ixgbe_dcbnl_ieee_setets,
+ .ieee_getpfc = ixgbe_dcbnl_ieee_getpfc,
+ .ieee_setpfc = ixgbe_dcbnl_ieee_setpfc,
+ .ieee_setapp = ixgbe_dcbnl_ieee_setapp,
+ .ieee_delapp = ixgbe_dcbnl_ieee_delapp,
+ .getstate = ixgbe_dcbnl_get_state,
+ .setstate = ixgbe_dcbnl_set_state,
+ .getpermhwaddr = ixgbe_dcbnl_get_perm_hw_addr,
+ .setpgtccfgtx = ixgbe_dcbnl_set_pg_tc_cfg_tx,
+ .setpgbwgcfgtx = ixgbe_dcbnl_set_pg_bwg_cfg_tx,
+ .setpgtccfgrx = ixgbe_dcbnl_set_pg_tc_cfg_rx,
+ .setpgbwgcfgrx = ixgbe_dcbnl_set_pg_bwg_cfg_rx,
+ .getpgtccfgtx = ixgbe_dcbnl_get_pg_tc_cfg_tx,
+ .getpgbwgcfgtx = ixgbe_dcbnl_get_pg_bwg_cfg_tx,
+ .getpgtccfgrx = ixgbe_dcbnl_get_pg_tc_cfg_rx,
+ .getpgbwgcfgrx = ixgbe_dcbnl_get_pg_bwg_cfg_rx,
+ .setpfccfg = ixgbe_dcbnl_set_pfc_cfg,
+ .getpfccfg = ixgbe_dcbnl_get_pfc_cfg,
+ .setall = ixgbe_dcbnl_set_all,
+ .getcap = ixgbe_dcbnl_getcap,
+ .getnumtcs = ixgbe_dcbnl_getnumtcs,
+ .setnumtcs = ixgbe_dcbnl_setnumtcs,
+ .getpfcstate = ixgbe_dcbnl_getpfcstate,
+ .setpfcstate = ixgbe_dcbnl_setpfcstate,
+ .getapp = ixgbe_dcbnl_getapp,
+ .getdcbx = ixgbe_dcbnl_getdcbx,
+ .setdcbx = ixgbe_dcbnl_setdcbx,
+};
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgbe */
+
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/vmalloc.h>
+#include <linux/uaccess.h>
+
+#include "ixgbe.h"
+
+
+#define IXGBE_ALL_RAR_ENTRIES 16
+
+enum {NETDEV_STATS, IXGBE_STATS};
+
+struct ixgbe_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int type;
+ int sizeof_stat;
+ int stat_offset;
+};
+
+#define IXGBE_STAT(m) IXGBE_STATS, \
+ sizeof(((struct ixgbe_adapter *)0)->m), \
+ offsetof(struct ixgbe_adapter, m)
+#define IXGBE_NETDEV_STAT(m) NETDEV_STATS, \
+ sizeof(((struct rtnl_link_stats64 *)0)->m), \
+ offsetof(struct rtnl_link_stats64, m)
+
+static struct ixgbe_stats ixgbe_gstrings_stats[] = {
+ {"rx_packets", IXGBE_NETDEV_STAT(rx_packets)},
+ {"tx_packets", IXGBE_NETDEV_STAT(tx_packets)},
+ {"rx_bytes", IXGBE_NETDEV_STAT(rx_bytes)},
+ {"tx_bytes", IXGBE_NETDEV_STAT(tx_bytes)},
+ {"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
+ {"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
+ {"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
+ {"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
+ {"lsc_int", IXGBE_STAT(lsc_int)},
+ {"tx_busy", IXGBE_STAT(tx_busy)},
+ {"non_eop_descs", IXGBE_STAT(non_eop_descs)},
+ {"rx_errors", IXGBE_NETDEV_STAT(rx_errors)},
+ {"tx_errors", IXGBE_NETDEV_STAT(tx_errors)},
+ {"rx_dropped", IXGBE_NETDEV_STAT(rx_dropped)},
+ {"tx_dropped", IXGBE_NETDEV_STAT(tx_dropped)},
+ {"multicast", IXGBE_NETDEV_STAT(multicast)},
+ {"broadcast", IXGBE_STAT(stats.bprc)},
+ {"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) },
+ {"collisions", IXGBE_NETDEV_STAT(collisions)},
+ {"rx_over_errors", IXGBE_NETDEV_STAT(rx_over_errors)},
+ {"rx_crc_errors", IXGBE_NETDEV_STAT(rx_crc_errors)},
+ {"rx_frame_errors", IXGBE_NETDEV_STAT(rx_frame_errors)},
+ {"hw_rsc_aggregated", IXGBE_STAT(rsc_total_count)},
+ {"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
+ {"fdir_match", IXGBE_STAT(stats.fdirmatch)},
+ {"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
+ {"fdir_overflow", IXGBE_STAT(fdir_overflow)},
+ {"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)},
+ {"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)},
+ {"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)},
+ {"tx_carrier_errors", IXGBE_NETDEV_STAT(tx_carrier_errors)},
+ {"tx_fifo_errors", IXGBE_NETDEV_STAT(tx_fifo_errors)},
+ {"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)},
+ {"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
+ {"tx_restart_queue", IXGBE_STAT(restart_queue)},
+ {"rx_long_length_errors", IXGBE_STAT(stats.roc)},
+ {"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
+ {"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},
+ {"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)},
+ {"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)},
+ {"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)},
+ {"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)},
+ {"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
+ {"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
+ {"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
+ {"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)},
+ {"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)},
+ {"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)},
+ {"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)},
+#ifdef IXGBE_FCOE
+ {"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
+ {"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
+ {"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
+ {"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
+ {"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
+ {"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
+#endif /* IXGBE_FCOE */
+};
+
+#define IXGBE_QUEUE_STATS_LEN \
+ ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \
+ ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \
+ (sizeof(struct ixgbe_queue_stats) / sizeof(u64)))
+#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
+#define IXGBE_PB_STATS_LEN ( \
+ (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \
+ IXGBE_FLAG_DCB_ENABLED) ? \
+ (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \
+ sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \
+ / sizeof(u64) : 0)
+#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \
+ IXGBE_PB_STATS_LEN + \
+ IXGBE_QUEUE_STATS_LEN)
+
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)", "Eeprom test (offline)",
+ "Interrupt test (offline)", "Loopback test (offline)",
+ "Link test (on/offline)"
+};
+#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN
+
+static int ixgbe_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = 0;
+ bool link_up;
+
+ ecmd->supported = SUPPORTED_10000baseT_Full;
+ ecmd->autoneg = AUTONEG_ENABLE;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+ (hw->phy.multispeed_fiber)) {
+ ecmd->supported |= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_X540:
+ ecmd->supported |= SUPPORTED_100baseT_Full;
+ break;
+ default:
+ break;
+ }
+
+ ecmd->advertising = ADVERTISED_Autoneg;
+ if (hw->phy.autoneg_advertised) {
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_100_FULL)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_10GB_FULL)
+ ecmd->advertising |= ADVERTISED_10000baseT_Full;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_1GB_FULL)
+ ecmd->advertising |= ADVERTISED_1000baseT_Full;
+ } else {
+ /*
+ * Default advertised modes in case
+ * phy.autoneg_advertised isn't set.
+ */
+ ecmd->advertising |= (ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full);
+ if (hw->mac.type == ixgbe_mac_X540)
+ ecmd->advertising |= ADVERTISED_100baseT_Full;
+ }
+
+ if (hw->phy.media_type == ixgbe_media_type_copper) {
+ ecmd->supported |= SUPPORTED_TP;
+ ecmd->advertising |= ADVERTISED_TP;
+ ecmd->port = PORT_TP;
+ } else {
+ ecmd->supported |= SUPPORTED_FIBRE;
+ ecmd->advertising |= ADVERTISED_FIBRE;
+ ecmd->port = PORT_FIBRE;
+ }
+ } else if (hw->phy.media_type == ixgbe_media_type_backplane) {
+ /* Set as FIBRE until SERDES defined in kernel */
+ if (hw->device_id == IXGBE_DEV_ID_82598_BX) {
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ ecmd->autoneg = AUTONEG_DISABLE;
+ } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) ||
+ (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) {
+ ecmd->supported |= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_Autoneg |
+ SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_Autoneg |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ } else {
+ ecmd->supported |= (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_10000baseT_Full |
+ ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ }
+ } else {
+ ecmd->supported |= SUPPORTED_FIBRE;
+ ecmd->advertising = (ADVERTISED_10000baseT_Full |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ ecmd->autoneg = AUTONEG_DISABLE;
+ }
+
+ /* Get PHY type */
+ switch (adapter->hw.phy.type) {
+ case ixgbe_phy_tn:
+ case ixgbe_phy_aq:
+ case ixgbe_phy_cu_unknown:
+ /* Copper 10G-BASET */
+ ecmd->port = PORT_TP;
+ break;
+ case ixgbe_phy_qt:
+ ecmd->port = PORT_FIBRE;
+ break;
+ case ixgbe_phy_nl:
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ switch (adapter->hw.phy.sfp_type) {
+ /* SFP+ devices, further checking needed */
+ case ixgbe_sfp_type_da_cu:
+ case ixgbe_sfp_type_da_cu_core0:
+ case ixgbe_sfp_type_da_cu_core1:
+ ecmd->port = PORT_DA;
+ break;
+ case ixgbe_sfp_type_sr:
+ case ixgbe_sfp_type_lr:
+ case ixgbe_sfp_type_srlr_core0:
+ case ixgbe_sfp_type_srlr_core1:
+ ecmd->port = PORT_FIBRE;
+ break;
+ case ixgbe_sfp_type_not_present:
+ ecmd->port = PORT_NONE;
+ break;
+ case ixgbe_sfp_type_1g_cu_core0:
+ case ixgbe_sfp_type_1g_cu_core1:
+ ecmd->port = PORT_TP;
+ ecmd->supported = SUPPORTED_TP;
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_TP);
+ break;
+ case ixgbe_sfp_type_unknown:
+ default:
+ ecmd->port = PORT_OTHER;
+ break;
+ }
+ break;
+ case ixgbe_phy_xaui:
+ ecmd->port = PORT_NONE;
+ break;
+ case ixgbe_phy_unknown:
+ case ixgbe_phy_generic:
+ case ixgbe_phy_sfp_unsupported:
+ default:
+ ecmd->port = PORT_OTHER;
+ break;
+ }
+
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (link_up) {
+ switch (link_speed) {
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ ethtool_cmd_speed_set(ecmd, SPEED_10000);
+ break;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ break;
+ case IXGBE_LINK_SPEED_100_FULL:
+ ethtool_cmd_speed_set(ecmd, SPEED_100);
+ break;
+ default:
+ break;
+ }
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ return 0;
+}
+
+static int ixgbe_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 advertised, old;
+ s32 err = 0;
+
+ if ((hw->phy.media_type == ixgbe_media_type_copper) ||
+ (hw->phy.multispeed_fiber)) {
+ /* 10000/copper and 1000/copper must autoneg
+ * this function does not support any duplex forcing, but can
+ * limit the advertising of the adapter to only 10000 or 1000 */
+ if (ecmd->autoneg == AUTONEG_DISABLE)
+ return -EINVAL;
+
+ old = hw->phy.autoneg_advertised;
+ advertised = 0;
+ if (ecmd->advertising & ADVERTISED_10000baseT_Full)
+ advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (ecmd->advertising & ADVERTISED_1000baseT_Full)
+ advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (ecmd->advertising & ADVERTISED_100baseT_Full)
+ advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ if (old == advertised)
+ return err;
+ /* this sets the link speed and restarts auto-neg */
+ hw->mac.autotry_restart = true;
+ err = hw->mac.ops.setup_link(hw, advertised, true, true);
+ if (err) {
+ e_info(probe, "setup link failed with code %d\n", err);
+ hw->mac.ops.setup_link(hw, old, true, true);
+ }
+ } else {
+ /* in this case we currently only support 10Gb/FULL */
+ u32 speed = ethtool_cmd_speed(ecmd);
+ if ((ecmd->autoneg == AUTONEG_ENABLE) ||
+ (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
+ (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+static void ixgbe_get_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /*
+ * Flow Control Autoneg isn't on if
+ * - we didn't ask for it OR
+ * - it failed, we know this by tx & rx being off
+ */
+ if (hw->fc.disable_fc_autoneg ||
+ (hw->fc.current_mode == ixgbe_fc_none))
+ pause->autoneg = 0;
+ else
+ pause->autoneg = 1;
+
+ if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
+ pause->rx_pause = 1;
+ } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
+ pause->tx_pause = 1;
+ } else if (hw->fc.current_mode == ixgbe_fc_full) {
+ pause->rx_pause = 1;
+ pause->tx_pause = 1;
+#ifdef CONFIG_DCB
+ } else if (hw->fc.current_mode == ixgbe_fc_pfc) {
+ pause->rx_pause = 0;
+ pause->tx_pause = 0;
+#endif
+ }
+}
+
+static int ixgbe_set_pauseparam(struct net_device *netdev,
+ struct ethtool_pauseparam *pause)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_fc_info fc;
+
+#ifdef CONFIG_DCB
+ if (adapter->dcb_cfg.pfc_mode_enable ||
+ ((hw->mac.type == ixgbe_mac_82598EB) &&
+ (adapter->flags & IXGBE_FLAG_DCB_ENABLED)))
+ return -EINVAL;
+
+#endif
+ fc = hw->fc;
+
+ if (pause->autoneg != AUTONEG_ENABLE)
+ fc.disable_fc_autoneg = true;
+ else
+ fc.disable_fc_autoneg = false;
+
+ if ((pause->rx_pause && pause->tx_pause) || pause->autoneg)
+ fc.requested_mode = ixgbe_fc_full;
+ else if (pause->rx_pause && !pause->tx_pause)
+ fc.requested_mode = ixgbe_fc_rx_pause;
+ else if (!pause->rx_pause && pause->tx_pause)
+ fc.requested_mode = ixgbe_fc_tx_pause;
+ else if (!pause->rx_pause && !pause->tx_pause)
+ fc.requested_mode = ixgbe_fc_none;
+ else
+ return -EINVAL;
+
+#ifdef CONFIG_DCB
+ adapter->last_lfc_mode = fc.requested_mode;
+#endif
+
+ /* if the thing changed then we'll update and use new autoneg */
+ if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) {
+ hw->fc = fc;
+ if (netif_running(netdev))
+ ixgbe_reinit_locked(adapter);
+ else
+ ixgbe_reset(adapter);
+ }
+
+ return 0;
+}
+
+static u32 ixgbe_get_msglevel(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void ixgbe_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+static int ixgbe_get_regs_len(struct net_device *netdev)
+{
+#define IXGBE_REGS_LEN 1128
+ return IXGBE_REGS_LEN * sizeof(u32);
+}
+
+#define IXGBE_GET_STAT(_A_, _R_) _A_->stats._R_
+
+static void ixgbe_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs, void *p)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u8 i;
+
+ memset(p, 0, IXGBE_REGS_LEN * sizeof(u32));
+
+ regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS);
+ regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP);
+ regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER);
+ regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER);
+
+ /* NVM Register */
+ regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC);
+ regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD);
+ regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA);
+ regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL);
+ regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA);
+ regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL);
+ regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA);
+ regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT);
+ regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP);
+ regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC);
+
+ /* Interrupt */
+ /* don't read EICR because it can clear interrupt causes, instead
+ * read EICS which is a shadow but doesn't clear EICR */
+ regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS);
+ regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS);
+ regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS);
+ regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC);
+ regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC);
+ regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM);
+ regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0));
+ regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0));
+ regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT);
+ regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA);
+ regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0));
+ regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE);
+
+ /* Flow Control */
+ regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP);
+ regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0));
+ regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1));
+ regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2));
+ regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3));
+ for (i = 0; i < 8; i++) {
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i));
+ regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i));
+ break;
+ case ixgbe_mac_82599EB:
+ regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL_82599(i));
+ regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH_82599(i));
+ break;
+ default:
+ break;
+ }
+ }
+ regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV);
+ regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS);
+
+ /* Receive DMA */
+ for (i = 0; i < 64; i++)
+ regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
+ for (i = 0; i < 64; i++)
+ regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
+ for (i = 0; i < 64; i++)
+ regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
+ for (i = 0; i < 64; i++)
+ regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
+ for (i = 0; i < 64; i++)
+ regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
+ for (i = 0; i < 64; i++)
+ regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+ for (i = 0; i < 8; i++)
+ regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
+ regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN);
+
+ /* Receive */
+ regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
+ regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL);
+ for (i = 0; i < 16; i++)
+ regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i));
+ for (i = 0; i < 16; i++)
+ regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i));
+ regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0));
+ regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL);
+ regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC);
+ regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+ for (i = 0; i < 8; i++)
+ regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i));
+ regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP);
+
+ /* Transmit */
+ for (i = 0; i < 32; i++)
+ regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i));
+ for (i = 0; i < 32; i++)
+ regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i));
+ regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
+ for (i = 0; i < 16; i++)
+ regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
+ regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG);
+ for (i = 0; i < 8; i++)
+ regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i));
+ regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP);
+
+ /* Wake Up */
+ regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC);
+ regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC);
+ regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS);
+ regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV);
+ regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT);
+ regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT);
+ regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL);
+ regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
+ regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
+
+ /* DCB */
+ regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);
+ regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
+ regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR);
+ for (i = 0; i < 8; i++)
+ regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i));
+ for (i = 0; i < 8; i++)
+ regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i));
+
+ /* Statistics */
+ regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs);
+ regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc);
+ regs_buff[883] = IXGBE_GET_STAT(adapter, errbc);
+ regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc);
+ for (i = 0; i < 8; i++)
+ regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]);
+ regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc);
+ regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc);
+ regs_buff[895] = IXGBE_GET_STAT(adapter, rlec);
+ regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc);
+ regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc);
+ regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc);
+ regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc);
+ for (i = 0; i < 8; i++)
+ regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]);
+ for (i = 0; i < 8; i++)
+ regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]);
+ for (i = 0; i < 8; i++)
+ regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]);
+ for (i = 0; i < 8; i++)
+ regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]);
+ regs_buff[932] = IXGBE_GET_STAT(adapter, prc64);
+ regs_buff[933] = IXGBE_GET_STAT(adapter, prc127);
+ regs_buff[934] = IXGBE_GET_STAT(adapter, prc255);
+ regs_buff[935] = IXGBE_GET_STAT(adapter, prc511);
+ regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023);
+ regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522);
+ regs_buff[938] = IXGBE_GET_STAT(adapter, gprc);
+ regs_buff[939] = IXGBE_GET_STAT(adapter, bprc);
+ regs_buff[940] = IXGBE_GET_STAT(adapter, mprc);
+ regs_buff[941] = IXGBE_GET_STAT(adapter, gptc);
+ regs_buff[942] = IXGBE_GET_STAT(adapter, gorc);
+ regs_buff[944] = IXGBE_GET_STAT(adapter, gotc);
+ for (i = 0; i < 8; i++)
+ regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]);
+ regs_buff[954] = IXGBE_GET_STAT(adapter, ruc);
+ regs_buff[955] = IXGBE_GET_STAT(adapter, rfc);
+ regs_buff[956] = IXGBE_GET_STAT(adapter, roc);
+ regs_buff[957] = IXGBE_GET_STAT(adapter, rjc);
+ regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc);
+ regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc);
+ regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc);
+ regs_buff[961] = IXGBE_GET_STAT(adapter, tor);
+ regs_buff[963] = IXGBE_GET_STAT(adapter, tpr);
+ regs_buff[964] = IXGBE_GET_STAT(adapter, tpt);
+ regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64);
+ regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127);
+ regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255);
+ regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511);
+ regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023);
+ regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522);
+ regs_buff[971] = IXGBE_GET_STAT(adapter, mptc);
+ regs_buff[972] = IXGBE_GET_STAT(adapter, bptc);
+ regs_buff[973] = IXGBE_GET_STAT(adapter, xec);
+ for (i = 0; i < 16; i++)
+ regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]);
+ for (i = 0; i < 16; i++)
+ regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]);
+ for (i = 0; i < 16; i++)
+ regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]);
+ for (i = 0; i < 16; i++)
+ regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]);
+
+ /* MAC */
+ regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG);
+ regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
+ regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
+ regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0);
+ regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1);
+ regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
+ regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
+ regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP);
+ regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP);
+ regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1);
+ regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP);
+ regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA);
+ regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE);
+ regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD);
+ regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS);
+ regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA);
+ regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+ regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD);
+ regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD);
+ regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG);
+ regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1);
+ regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2);
+ regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS);
+ regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC);
+ regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS);
+ regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS);
+ regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3);
+ regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1);
+ regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2);
+ regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
+
+ /* Diagnostic */
+ regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL);
+ for (i = 0; i < 8; i++)
+ regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i));
+ regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN);
+ for (i = 0; i < 4; i++)
+ regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i));
+ regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE);
+ regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL);
+ for (i = 0; i < 8; i++)
+ regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i));
+ regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN);
+ for (i = 0; i < 4; i++)
+ regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i));
+ regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE);
+ regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL);
+ regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0);
+ regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1);
+ regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2);
+ regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3);
+ regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL);
+ regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0);
+ regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1);
+ regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2);
+ regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3);
+ for (i = 0; i < 8; i++)
+ regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i));
+ regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL);
+ regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1);
+ regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2);
+ regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1);
+ regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2);
+ regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS);
+ regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL);
+ regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC);
+ regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC);
+}
+
+static int ixgbe_get_eeprom_len(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ return adapter->hw.eeprom.word_size * 2;
+}
+
+static int ixgbe_get_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *eeprom, u8 *bytes)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u16 *eeprom_buff;
+ int first_word, last_word, eeprom_len;
+ int ret_val = 0;
+ u16 i;
+
+ if (eeprom->len == 0)
+ return -EINVAL;
+
+ eeprom->magic = hw->vendor_id | (hw->device_id << 16);
+
+ first_word = eeprom->offset >> 1;
+ last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+ eeprom_len = last_word - first_word + 1;
+
+ eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL);
+ if (!eeprom_buff)
+ return -ENOMEM;
+
+ ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
+ eeprom_buff);
+
+ /* Device's eeprom is always little-endian, word addressable */
+ for (i = 0; i < eeprom_len; i++)
+ le16_to_cpus(&eeprom_buff[i]);
+
+ memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+ kfree(eeprom_buff);
+
+ return ret_val;
+}
+
+static void ixgbe_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ char firmware_version[32];
+
+ strncpy(drvinfo->driver, ixgbe_driver_name,
+ sizeof(drvinfo->driver) - 1);
+ strncpy(drvinfo->version, ixgbe_driver_version,
+ sizeof(drvinfo->version) - 1);
+
+ snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
+ (adapter->eeprom_version & 0xF000) >> 12,
+ (adapter->eeprom_version & 0x0FF0) >> 4,
+ adapter->eeprom_version & 0x000F);
+
+ strncpy(drvinfo->fw_version, firmware_version,
+ sizeof(drvinfo->fw_version));
+ strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
+ sizeof(drvinfo->bus_info));
+ drvinfo->n_stats = IXGBE_STATS_LEN;
+ drvinfo->testinfo_len = IXGBE_TEST_LEN;
+ drvinfo->regdump_len = ixgbe_get_regs_len(netdev);
+}
+
+static void ixgbe_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
+ struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
+
+ ring->rx_max_pending = IXGBE_MAX_RXD;
+ ring->tx_max_pending = IXGBE_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int ixgbe_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_ring *temp_tx_ring, *temp_rx_ring;
+ int i, err = 0;
+ u32 new_rx_count, new_tx_count;
+ bool need_update = false;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = max(ring->rx_pending, (u32)IXGBE_MIN_RXD);
+ new_rx_count = min(new_rx_count, (u32)IXGBE_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = max(ring->tx_pending, (u32)IXGBE_MIN_TXD);
+ new_tx_count = min(new_tx_count, (u32)IXGBE_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring[0]->count) &&
+ (new_rx_count == adapter->rx_ring[0]->count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
+ temp_tx_ring = vmalloc(adapter->num_tx_queues * sizeof(struct ixgbe_ring));
+ if (!temp_tx_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ if (new_tx_count != adapter->tx_ring_count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ memcpy(&temp_tx_ring[i], adapter->tx_ring[i],
+ sizeof(struct ixgbe_ring));
+ temp_tx_ring[i].count = new_tx_count;
+ err = ixgbe_setup_tx_resources(&temp_tx_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ ixgbe_free_tx_resources(&temp_tx_ring[i]);
+ }
+ goto clear_reset;
+ }
+ }
+ need_update = true;
+ }
+
+ temp_rx_ring = vmalloc(adapter->num_rx_queues * sizeof(struct ixgbe_ring));
+ if (!temp_rx_ring) {
+ err = -ENOMEM;
+ goto err_setup;
+ }
+
+ if (new_rx_count != adapter->rx_ring_count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ memcpy(&temp_rx_ring[i], adapter->rx_ring[i],
+ sizeof(struct ixgbe_ring));
+ temp_rx_ring[i].count = new_rx_count;
+ err = ixgbe_setup_rx_resources(&temp_rx_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ ixgbe_free_rx_resources(&temp_rx_ring[i]);
+ }
+ goto err_setup;
+ }
+ }
+ need_update = true;
+ }
+
+ /* if rings need to be updated, here's the place to do it in one shot */
+ if (need_update) {
+ ixgbe_down(adapter);
+
+ /* tx */
+ if (new_tx_count != adapter->tx_ring_count) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ ixgbe_free_tx_resources(adapter->tx_ring[i]);
+ memcpy(adapter->tx_ring[i], &temp_tx_ring[i],
+ sizeof(struct ixgbe_ring));
+ }
+ adapter->tx_ring_count = new_tx_count;
+ }
+
+ /* rx */
+ if (new_rx_count != adapter->rx_ring_count) {
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ ixgbe_free_rx_resources(adapter->rx_ring[i]);
+ memcpy(adapter->rx_ring[i], &temp_rx_ring[i],
+ sizeof(struct ixgbe_ring));
+ }
+ adapter->rx_ring_count = new_rx_count;
+ }
+ ixgbe_up(adapter);
+ }
+
+ vfree(temp_rx_ring);
+err_setup:
+ vfree(temp_tx_ring);
+clear_reset:
+ clear_bit(__IXGBE_RESETTING, &adapter->state);
+ return err;
+}
+
+static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_TEST:
+ return IXGBE_TEST_LEN;
+ case ETH_SS_STATS:
+ return IXGBE_STATS_LEN;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void ixgbe_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct rtnl_link_stats64 temp;
+ const struct rtnl_link_stats64 *net_stats;
+ unsigned int start;
+ struct ixgbe_ring *ring;
+ int i, j;
+ char *p = NULL;
+
+ ixgbe_update_stats(adapter);
+ net_stats = dev_get_stats(netdev, &temp);
+ for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+ switch (ixgbe_gstrings_stats[i].type) {
+ case NETDEV_STATS:
+ p = (char *) net_stats +
+ ixgbe_gstrings_stats[i].stat_offset;
+ break;
+ case IXGBE_STATS:
+ p = (char *) adapter +
+ ixgbe_gstrings_stats[i].stat_offset;
+ break;
+ }
+
+ data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
+ }
+ for (j = 0; j < adapter->num_tx_queues; j++) {
+ ring = adapter->tx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->syncp);
+ data[i] = ring->stats.packets;
+ data[i+1] = ring->stats.bytes;
+ } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+ i += 2;
+ }
+ for (j = 0; j < adapter->num_rx_queues; j++) {
+ ring = adapter->rx_ring[j];
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->syncp);
+ data[i] = ring->stats.packets;
+ data[i+1] = ring->stats.bytes;
+ } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+ i += 2;
+ }
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) {
+ data[i++] = adapter->stats.pxontxc[j];
+ data[i++] = adapter->stats.pxofftxc[j];
+ }
+ for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) {
+ data[i++] = adapter->stats.pxonrxc[j];
+ data[i++] = adapter->stats.pxoffrxc[j];
+ }
+ }
+}
+
+static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ char *p = (char *)data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *ixgbe_gstrings_test,
+ IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, ixgbe_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ sprintf(p, "tx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ sprintf(p, "rx_queue_%u_packets", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_queue_%u_bytes", i);
+ p += ETH_GSTRING_LEN;
+ }
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
+ sprintf(p, "tx_pb_%u_pxon", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "tx_pb_%u_pxoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) {
+ sprintf(p, "rx_pb_%u_pxon", i);
+ p += ETH_GSTRING_LEN;
+ sprintf(p, "rx_pb_%u_pxoff", i);
+ p += ETH_GSTRING_LEN;
+ }
+ }
+ /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */
+ break;
+ }
+}
+
+static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ bool link_up;
+ u32 link_speed = 0;
+ *data = 0;
+
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+ if (link_up)
+ return *data;
+ else
+ *data = 1;
+ return *data;
+}
+
+/* ethtool register test data */
+struct ixgbe_reg_test {
+ u16 reg;
+ u8 array_len;
+ u8 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* default 82599 register test */
+static const struct ixgbe_reg_test reg_test_82599[] = {
+ { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+ { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+ { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+ { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+ { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+ { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
+ { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF },
+ { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+/* default 82598 register test */
+static const struct ixgbe_reg_test reg_test_82598[] = {
+ { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
+ { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ /* Enable all four RX queues before testing. */
+ { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+ /* RDH is read-only for 82598, only test RDT. */
+ { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
+ { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
+ { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF },
+ { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 },
+ { IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 },
+ { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF },
+ { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { 0, 0, 0, 0 }
+};
+
+static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ u32 pat, val, before;
+ static const u32 test_pattern[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
+
+ for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
+ before = readl(adapter->hw.hw_addr + reg);
+ writel((test_pattern[pat] & write),
+ (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if (val != (test_pattern[pat] & write & mask)) {
+ e_err(drv, "pattern test reg %04X failed: got "
+ "0x%08X expected 0x%08X\n",
+ reg, val, (test_pattern[pat] & write & mask));
+ *data = reg;
+ writel(before, adapter->hw.hw_addr + reg);
+ return 1;
+ }
+ writel(before, adapter->hw.hw_addr + reg);
+ }
+ return 0;
+}
+
+static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
+ u32 mask, u32 write)
+{
+ u32 val, before;
+ before = readl(adapter->hw.hw_addr + reg);
+ writel((write & mask), (adapter->hw.hw_addr + reg));
+ val = readl(adapter->hw.hw_addr + reg);
+ if ((write & mask) != (val & mask)) {
+ e_err(drv, "set/check reg %04X test failed: got 0x%08X "
+ "expected 0x%08X\n", reg, (val & mask), (write & mask));
+ *data = reg;
+ writel(before, (adapter->hw.hw_addr + reg));
+ return 1;
+ }
+ writel(before, (adapter->hw.hw_addr + reg));
+ return 0;
+}
+
+#define REG_PATTERN_TEST(reg, mask, write) \
+ do { \
+ if (reg_pattern_test(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0) \
+
+
+#define REG_SET_AND_CHECK(reg, mask, write) \
+ do { \
+ if (reg_set_and_check(adapter, data, reg, mask, write)) \
+ return 1; \
+ } while (0) \
+
+static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+ const struct ixgbe_reg_test *test;
+ u32 value, before, after;
+ u32 i, toggle;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ toggle = 0x7FFFF3FF;
+ test = reg_test_82598;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ toggle = 0x7FFFF30F;
+ test = reg_test_82599;
+ break;
+ default:
+ *data = 1;
+ return 1;
+ break;
+ }
+
+ /*
+ * Because the status register is such a special case,
+ * we handle it separately from the rest of the register
+ * tests. Some bits are read-only, some toggle, and some
+ * are writeable on newer MACs.
+ */
+ before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS);
+ value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
+ after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
+ if (value != after) {
+ e_err(drv, "failed STATUS register test got: 0x%08X "
+ "expected: 0x%08X\n", after, value);
+ *data = 1;
+ return 1;
+ }
+ /* restore previous status */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, before);
+
+ /*
+ * Perform the remainder of the register test, looping through
+ * the test table until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 0x40),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg + (i * 0x40),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * 0x40));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return 0;
+}
+
+static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ if (hw->eeprom.ops.validate_checksum(hw, NULL))
+ *data = 1;
+ else
+ *data = 0;
+ return *data;
+}
+
+static irqreturn_t ixgbe_test_intr(int irq, void *data)
+{
+ struct net_device *netdev = (struct net_device *) data;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+
+ return IRQ_HANDLED;
+}
+
+static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+ struct net_device *netdev = adapter->netdev;
+ u32 mask, i = 0, shared_int = true;
+ u32 irq = adapter->pdev->irq;
+
+ *data = 0;
+
+ /* Hook up test interrupt handler just for this test */
+ if (adapter->msix_entries) {
+ /* NOTE: we don't test MSI-X interrupts here, yet */
+ return 0;
+ } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+ shared_int = false;
+ if (request_irq(irq, ixgbe_test_intr, 0, netdev->name,
+ netdev)) {
+ *data = 1;
+ return -1;
+ }
+ } else if (!request_irq(irq, ixgbe_test_intr, IRQF_PROBE_SHARED,
+ netdev->name, netdev)) {
+ shared_int = false;
+ } else if (request_irq(irq, ixgbe_test_intr, IRQF_SHARED,
+ netdev->name, netdev)) {
+ *data = 1;
+ return -1;
+ }
+ e_info(hw, "testing %s interrupt\n", shared_int ?
+ "shared" : "unshared");
+
+ /* Disable all the interrupts */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ /* Test each interrupt */
+ for (; i < 10; i++) {
+ /* Interrupt to test */
+ mask = 1 << i;
+
+ if (!shared_int) {
+ /*
+ * Disable the interrupts to be reported in
+ * the cause register and then force the same
+ * interrupt and see if one gets posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+ ~mask & 0x00007FFF);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+ ~mask & 0x00007FFF);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ if (adapter->test_icr & mask) {
+ *data = 3;
+ break;
+ }
+ }
+
+ /*
+ * Enable the interrupt to be reported in the cause
+ * register and then force the same interrupt and see
+ * if one gets posted. If an interrupt was not posted
+ * to the bus, the test failed.
+ */
+ adapter->test_icr = 0;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ if (!(adapter->test_icr &mask)) {
+ *data = 4;
+ break;
+ }
+
+ if (!shared_int) {
+ /*
+ * Disable the other interrupts to be reported in
+ * the cause register and then force the other
+ * interrupts and see if any get posted. If
+ * an interrupt was posted to the bus, the
+ * test failed.
+ */
+ adapter->test_icr = 0;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
+ ~mask & 0x00007FFF);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
+ ~mask & 0x00007FFF);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ if (adapter->test_icr) {
+ *data = 5;
+ break;
+ }
+ }
+ }
+
+ /* Disable all the interrupts */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ /* Unhook test interrupt handler */
+ free_irq(irq, netdev);
+
+ return *data;
+}
+
+static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+ struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg_ctl;
+
+ /* shut down the DMA engines now so they can be reinitialized later */
+
+ /* first Rx */
+ reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ reg_ctl &= ~IXGBE_RXCTRL_RXEN;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
+ ixgbe_disable_rx_queue(adapter, rx_ring);
+
+ /* now Tx */
+ reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx));
+ reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ reg_ctl &= ~IXGBE_DMATXCTL_TE;
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
+ break;
+ default:
+ break;
+ }
+
+ ixgbe_reset(adapter);
+
+ ixgbe_free_tx_resources(&adapter->test_tx_ring);
+ ixgbe_free_rx_resources(&adapter->test_rx_ring);
+}
+
+static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+ struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+ u32 rctl, reg_data;
+ int ret_val;
+ int err;
+
+ /* Setup Tx descriptor ring and Tx buffers */
+ tx_ring->count = IXGBE_DEFAULT_TXD;
+ tx_ring->queue_index = 0;
+ tx_ring->dev = &adapter->pdev->dev;
+ tx_ring->netdev = adapter->netdev;
+ tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx;
+ tx_ring->numa_node = adapter->node;
+
+ err = ixgbe_setup_tx_resources(tx_ring);
+ if (err)
+ return 1;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
+ reg_data |= IXGBE_DMATXCTL_TE;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
+ break;
+ default:
+ break;
+ }
+
+ ixgbe_configure_tx_ring(adapter, tx_ring);
+
+ /* Setup Rx Descriptor ring and Rx buffers */
+ rx_ring->count = IXGBE_DEFAULT_RXD;
+ rx_ring->queue_index = 0;
+ rx_ring->dev = &adapter->pdev->dev;
+ rx_ring->netdev = adapter->netdev;
+ rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx;
+ rx_ring->rx_buf_len = IXGBE_RXBUFFER_2048;
+ rx_ring->numa_node = adapter->node;
+
+ err = ixgbe_setup_rx_resources(rx_ring);
+ if (err) {
+ ret_val = 4;
+ goto err_nomem;
+ }
+
+ rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl & ~IXGBE_RXCTRL_RXEN);
+
+ ixgbe_configure_rx_ring(adapter, rx_ring);
+
+ rctl |= IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
+
+ return 0;
+
+err_nomem:
+ ixgbe_free_desc_rings(adapter);
+ return ret_val;
+}
+
+static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg_data;
+
+ /* X540 needs to set the MACC.FLU bit to force link up */
+ if (adapter->hw.mac.type == ixgbe_mac_X540) {
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MACC);
+ reg_data |= IXGBE_MACC_FLU;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_MACC, reg_data);
+ }
+
+ /* right now we only support MAC loopback in the driver */
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+ /* Setup MAC loopback */
+ reg_data |= IXGBE_HLREG0_LPBK;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+ reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_data);
+
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_AUTOC);
+ reg_data &= ~IXGBE_AUTOC_LMS_MASK;
+ reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ usleep_range(10000, 20000);
+
+ /* Disable Atlas Tx lanes; re-enabled in reset path */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ u8 atlas;
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas);
+ atlas |= IXGBE_ATLAS_PDN_TX_REG_EN;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas);
+ atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas);
+ atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas);
+
+ hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas);
+ atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
+ hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas);
+ }
+
+ return 0;
+}
+
+static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
+{
+ u32 reg_data;
+
+ reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+ reg_data &= ~IXGBE_HLREG0_LPBK;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
+}
+
+static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ memset(skb->data, 0xFF, frame_size);
+ frame_size &= ~1;
+ memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+ memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+ memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
+ unsigned int frame_size)
+{
+ frame_size &= ~1;
+ if (*(skb->data + 3) == 0xFF) {
+ if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+ (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+ return 0;
+ }
+ }
+ return 13;
+}
+
+static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
+ struct ixgbe_ring *tx_ring,
+ unsigned int size)
+{
+ union ixgbe_adv_rx_desc *rx_desc;
+ struct ixgbe_rx_buffer *rx_buffer_info;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ const int bufsz = rx_ring->rx_buf_len;
+ u32 staterr;
+ u16 rx_ntc, tx_ntc, count = 0;
+
+ /* initialize next to clean and descriptor values */
+ rx_ntc = rx_ring->next_to_clean;
+ tx_ntc = tx_ring->next_to_clean;
+ rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & IXGBE_RXD_STAT_DD) {
+ /* check Rx buffer */
+ rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
+
+ /* unmap Rx buffer, will be remapped by alloc_rx_buffers */
+ dma_unmap_single(rx_ring->dev,
+ rx_buffer_info->dma,
+ bufsz,
+ DMA_FROM_DEVICE);
+ rx_buffer_info->dma = 0;
+
+ /* verify contents of skb */
+ if (!ixgbe_check_lbtest_frame(rx_buffer_info->skb, size))
+ count++;
+
+ /* unmap buffer on Tx side */
+ tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
+ ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+
+ /* increment Rx/Tx next to clean counters */
+ rx_ntc++;
+ if (rx_ntc == rx_ring->count)
+ rx_ntc = 0;
+ tx_ntc++;
+ if (tx_ntc == tx_ring->count)
+ tx_ntc = 0;
+
+ /* fetch next descriptor */
+ rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ /* re-map buffers to ring, store next to clean values */
+ ixgbe_alloc_rx_buffers(rx_ring, count);
+ rx_ring->next_to_clean = rx_ntc;
+ tx_ring->next_to_clean = tx_ntc;
+
+ return count;
+}
+
+static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
+ struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
+ int i, j, lc, good_cnt, ret_val = 0;
+ unsigned int size = 1024;
+ netdev_tx_t tx_ret_val;
+ struct sk_buff *skb;
+
+ /* allocate test skb */
+ skb = alloc_skb(size, GFP_KERNEL);
+ if (!skb)
+ return 11;
+
+ /* place data into test skb */
+ ixgbe_create_lbtest_frame(skb, size);
+ skb_put(skb, size);
+
+ /*
+ * Calculate the loop count based on the largest descriptor ring
+ * The idea is to wrap the largest ring a number of times using 64
+ * send/receive pairs during each loop
+ */
+
+ if (rx_ring->count <= tx_ring->count)
+ lc = ((tx_ring->count / 64) * 2) + 1;
+ else
+ lc = ((rx_ring->count / 64) * 2) + 1;
+
+ for (j = 0; j <= lc; j++) {
+ /* reset count of good packets */
+ good_cnt = 0;
+
+ /* place 64 packets on the transmit queue*/
+ for (i = 0; i < 64; i++) {
+ skb_get(skb);
+ tx_ret_val = ixgbe_xmit_frame_ring(skb,
+ adapter,
+ tx_ring);
+ if (tx_ret_val == NETDEV_TX_OK)
+ good_cnt++;
+ }
+
+ if (good_cnt != 64) {
+ ret_val = 12;
+ break;
+ }
+
+ /* allow 200 milliseconds for packets to go from Tx to Rx */
+ msleep(200);
+
+ good_cnt = ixgbe_clean_test_rings(rx_ring, tx_ring, size);
+ if (good_cnt != 64) {
+ ret_val = 13;
+ break;
+ }
+ }
+
+ /* free the original skb */
+ kfree_skb(skb);
+
+ return ret_val;
+}
+
+static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data)
+{
+ *data = ixgbe_setup_desc_rings(adapter);
+ if (*data)
+ goto out;
+ *data = ixgbe_setup_loopback_test(adapter);
+ if (*data)
+ goto err_loopback;
+ *data = ixgbe_run_loopback_test(adapter);
+ ixgbe_loopback_cleanup(adapter);
+
+err_loopback:
+ ixgbe_free_desc_rings(adapter);
+out:
+ return *data;
+}
+
+static void ixgbe_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IXGBE_TESTING, &adapter->state);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ e_info(hw, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (ixgbe_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_vfs; i++) {
+ if (adapter->vfinfo[i].clear_to_send) {
+ netdev_warn(netdev, "%s",
+ "offline diagnostic is not "
+ "supported when VFs are "
+ "present\n");
+ data[0] = 1;
+ data[1] = 1;
+ data[2] = 1;
+ data[3] = 1;
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ clear_bit(__IXGBE_TESTING,
+ &adapter->state);
+ goto skip_ol_tests;
+ }
+ }
+ }
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ ixgbe_reset(adapter);
+
+ e_info(hw, "register testing starting\n");
+ if (ixgbe_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ ixgbe_reset(adapter);
+ e_info(hw, "eeprom testing starting\n");
+ if (ixgbe_eeprom_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ ixgbe_reset(adapter);
+ e_info(hw, "interrupt testing starting\n");
+ if (ixgbe_intr_test(adapter, &data[2]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* If SRIOV or VMDq is enabled then skip MAC
+ * loopback diagnostic. */
+ if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
+ IXGBE_FLAG_VMDQ_ENABLED)) {
+ e_info(hw, "Skip MAC loopback diagnostic in VT "
+ "mode\n");
+ data[3] = 0;
+ goto skip_loopback;
+ }
+
+ ixgbe_reset(adapter);
+ e_info(hw, "loopback testing starting\n");
+ if (ixgbe_loopback_test(adapter, &data[3]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+skip_loopback:
+ ixgbe_reset(adapter);
+
+ clear_bit(__IXGBE_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ e_info(hw, "online testing starting\n");
+ /* Online tests */
+ if (ixgbe_link_test(adapter, &data[4]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+ data[1] = 0;
+ data[2] = 0;
+ data[3] = 0;
+
+ clear_bit(__IXGBE_TESTING, &adapter->state);
+ }
+skip_ol_tests:
+ msleep_interruptible(4 * 1000);
+}
+
+static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
+ struct ethtool_wolinfo *wol)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int retval = 1;
+
+ /* WOL not supported except for the following */
+ switch(hw->device_id) {
+ case IXGBE_DEV_ID_82599_SFP:
+ /* Only this subdevice supports WOL */
+ if (hw->subsystem_device_id != IXGBE_SUBDEV_ID_82599_SFP) {
+ wol->supported = 0;
+ break;
+ }
+ retval = 0;
+ break;
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ /* All except this subdevice support WOL */
+ if (hw->subsystem_device_id ==
+ IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
+ wol->supported = 0;
+ break;
+ }
+ retval = 0;
+ break;
+ case IXGBE_DEV_ID_82599_KX4:
+ retval = 0;
+ break;
+ default:
+ wol->supported = 0;
+ }
+
+ return retval;
+}
+
+static void ixgbe_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ wol->supported = WAKE_UCAST | WAKE_MCAST |
+ WAKE_BCAST | WAKE_MAGIC;
+ wol->wolopts = 0;
+
+ if (ixgbe_wol_exclusion(adapter, wol) ||
+ !device_can_wakeup(&adapter->pdev->dev))
+ return;
+
+ if (adapter->wol & IXGBE_WUFC_EX)
+ wol->wolopts |= WAKE_UCAST;
+ if (adapter->wol & IXGBE_WUFC_MC)
+ wol->wolopts |= WAKE_MCAST;
+ if (adapter->wol & IXGBE_WUFC_BC)
+ wol->wolopts |= WAKE_BCAST;
+ if (adapter->wol & IXGBE_WUFC_MAG)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
+ return -EOPNOTSUPP;
+
+ if (ixgbe_wol_exclusion(adapter, wol))
+ return wol->wolopts ? -EOPNOTSUPP : 0;
+
+ adapter->wol = 0;
+
+ if (wol->wolopts & WAKE_UCAST)
+ adapter->wol |= IXGBE_WUFC_EX;
+ if (wol->wolopts & WAKE_MCAST)
+ adapter->wol |= IXGBE_WUFC_MC;
+ if (wol->wolopts & WAKE_BCAST)
+ adapter->wol |= IXGBE_WUFC_BC;
+ if (wol->wolopts & WAKE_MAGIC)
+ adapter->wol |= IXGBE_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ return 0;
+}
+
+static int ixgbe_nway_reset(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ ixgbe_reinit_locked(adapter);
+
+ return 0;
+}
+
+static int ixgbe_set_phys_id(struct net_device *netdev,
+ enum ethtool_phys_id_state state)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ switch (state) {
+ case ETHTOOL_ID_ACTIVE:
+ adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ return 2;
+
+ case ETHTOOL_ID_ON:
+ hw->mac.ops.led_on(hw, IXGBE_LED_ON);
+ break;
+
+ case ETHTOOL_ID_OFF:
+ hw->mac.ops.led_off(hw, IXGBE_LED_ON);
+ break;
+
+ case ETHTOOL_ID_INACTIVE:
+ /* Restore LED settings */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
+ break;
+ }
+
+ return 0;
+}
+
+static int ixgbe_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit;
+
+ /* only valid if in constant ITR mode */
+ switch (adapter->rx_itr_setting) {
+ case 0:
+ /* throttling disabled */
+ ec->rx_coalesce_usecs = 0;
+ break;
+ case 1:
+ /* dynamic ITR mode */
+ ec->rx_coalesce_usecs = 1;
+ break;
+ default:
+ /* fixed interrupt rate mode */
+ ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
+ break;
+ }
+
+ /* if in mixed tx/rx queues per vector mode, report only rx settings */
+ if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
+ return 0;
+
+ /* only valid if in constant ITR mode */
+ switch (adapter->tx_itr_setting) {
+ case 0:
+ /* throttling disabled */
+ ec->tx_coalesce_usecs = 0;
+ break;
+ case 1:
+ /* dynamic ITR mode */
+ ec->tx_coalesce_usecs = 1;
+ break;
+ default:
+ ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * this function must be called before setting the new value of
+ * rx_itr_setting
+ */
+static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter,
+ struct ethtool_coalesce *ec)
+{
+ struct net_device *netdev = adapter->netdev;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
+ return false;
+
+ /* if interrupt rate is too high then disable RSC */
+ if (ec->rx_coalesce_usecs != 1 &&
+ ec->rx_coalesce_usecs <= 1000000/IXGBE_MAX_RSC_INT_RATE) {
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+ e_info(probe, "rx-usecs set too low, "
+ "disabling RSC\n");
+ adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
+ return true;
+ }
+ } else {
+ /* check the feature flag value and enable RSC if necessary */
+ if ((netdev->features & NETIF_F_LRO) &&
+ !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
+ e_info(probe, "rx-usecs set to %d, "
+ "re-enabling RSC\n",
+ ec->rx_coalesce_usecs);
+ adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+ return true;
+ }
+ }
+ return false;
+}
+
+static int ixgbe_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_q_vector *q_vector;
+ int i;
+ bool need_reset = false;
+
+ /* don't accept tx specific changes if we've got mixed RxTx vectors */
+ if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count
+ && ec->tx_coalesce_usecs)
+ return -EINVAL;
+
+ if (ec->tx_max_coalesced_frames_irq)
+ adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq;
+
+ if (ec->rx_coalesce_usecs > 1) {
+ /* check the limits */
+ if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
+ /* check the old value and enable RSC if necessary */
+ need_reset = ixgbe_update_rsc(adapter, ec);
+
+ /* store the value in ints/second */
+ adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
+
+ /* static value of interrupt rate */
+ adapter->rx_itr_setting = adapter->rx_eitr_param;
+ /* clear the lower bit as its used for dynamic state */
+ adapter->rx_itr_setting &= ~1;
+ } else if (ec->rx_coalesce_usecs == 1) {
+ /* check the old value and enable RSC if necessary */
+ need_reset = ixgbe_update_rsc(adapter, ec);
+
+ /* 1 means dynamic mode */
+ adapter->rx_eitr_param = 20000;
+ adapter->rx_itr_setting = 1;
+ } else {
+ /* check the old value and enable RSC if necessary */
+ need_reset = ixgbe_update_rsc(adapter, ec);
+ /*
+ * any other value means disable eitr, which is best
+ * served by setting the interrupt rate very high
+ */
+ adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->rx_itr_setting = 0;
+ }
+
+ if (ec->tx_coalesce_usecs > 1) {
+ /*
+ * don't have to worry about max_int as above because
+ * tx vectors don't do hardware RSC (an rx function)
+ */
+ /* check the limits */
+ if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
+ (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
+ return -EINVAL;
+
+ /* store the value in ints/second */
+ adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
+
+ /* static value of interrupt rate */
+ adapter->tx_itr_setting = adapter->tx_eitr_param;
+
+ /* clear the lower bit as its used for dynamic state */
+ adapter->tx_itr_setting &= ~1;
+ } else if (ec->tx_coalesce_usecs == 1) {
+ /* 1 means dynamic mode */
+ adapter->tx_eitr_param = 10000;
+ adapter->tx_itr_setting = 1;
+ } else {
+ adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
+ adapter->tx_itr_setting = 0;
+ }
+
+ /* MSI/MSIx Interrupt Mode */
+ if (adapter->flags &
+ (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
+ int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_vectors; i++) {
+ q_vector = adapter->q_vector[i];
+ if (q_vector->tx.count && !q_vector->rx.count)
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
+ else
+ /* rx only or mixed */
+ q_vector->eitr = adapter->rx_eitr_param;
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+ ixgbe_write_eitr(q_vector);
+ }
+ /* Legacy Interrupt Mode */
+ } else {
+ q_vector = adapter->q_vector[0];
+ q_vector->eitr = adapter->rx_eitr_param;
+ q_vector->tx.work_limit = adapter->tx_work_limit;
+ ixgbe_write_eitr(q_vector);
+ }
+
+ /*
+ * do reset here at the end to make sure EITR==0 case is handled
+ * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings
+ * also locks in RSC enable/disable which requires reset
+ */
+ if (need_reset)
+ ixgbe_do_reset(netdev);
+
+ return 0;
+}
+
+static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+ struct ethtool_rxnfc *cmd)
+{
+ union ixgbe_atr_input *mask = &adapter->fdir_mask;
+ struct ethtool_rx_flow_spec *fsp =
+ (struct ethtool_rx_flow_spec *)&cmd->fs;
+ struct hlist_node *node, *node2;
+ struct ixgbe_fdir_filter *rule = NULL;
+
+ /* report total rule count */
+ cmd->data = (1024 << adapter->fdir_pballoc) - 2;
+
+ hlist_for_each_entry_safe(rule, node, node2,
+ &adapter->fdir_filter_list, fdir_node) {
+ if (fsp->location <= rule->sw_idx)
+ break;
+ }
+
+ if (!rule || fsp->location != rule->sw_idx)
+ return -EINVAL;
+
+ /* fill out the flow spec entry */
+
+ /* set flow type field */
+ switch (rule->filter.formatted.flow_type) {
+ case IXGBE_ATR_FLOW_TYPE_TCPV4:
+ fsp->flow_type = TCP_V4_FLOW;
+ break;
+ case IXGBE_ATR_FLOW_TYPE_UDPV4:
+ fsp->flow_type = UDP_V4_FLOW;
+ break;
+ case IXGBE_ATR_FLOW_TYPE_SCTPV4:
+ fsp->flow_type = SCTP_V4_FLOW;
+ break;
+ case IXGBE_ATR_FLOW_TYPE_IPV4:
+ fsp->flow_type = IP_USER_FLOW;
+ fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
+ fsp->h_u.usr_ip4_spec.proto = 0;
+ fsp->m_u.usr_ip4_spec.proto = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port;
+ fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port;
+ fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port;
+ fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port;
+ fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0];
+ fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0];
+ fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0];
+ fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0];
+ fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id;
+ fsp->m_ext.vlan_tci = mask->formatted.vlan_id;
+ fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes;
+ fsp->m_ext.vlan_etype = mask->formatted.flex_bytes;
+ fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool);
+ fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool);
+ fsp->flow_type |= FLOW_EXT;
+
+ /* record action */
+ if (rule->action == IXGBE_FDIR_DROP_QUEUE)
+ fsp->ring_cookie = RX_CLS_FLOW_DISC;
+ else
+ fsp->ring_cookie = rule->action;
+
+ return 0;
+}
+
+static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter,
+ struct ethtool_rxnfc *cmd,
+ u32 *rule_locs)
+{
+ struct hlist_node *node, *node2;
+ struct ixgbe_fdir_filter *rule;
+ int cnt = 0;
+
+ /* report total rule count */
+ cmd->data = (1024 << adapter->fdir_pballoc) - 2;
+
+ hlist_for_each_entry_safe(rule, node, node2,
+ &adapter->fdir_filter_list, fdir_node) {
+ if (cnt == cmd->rule_cnt)
+ return -EMSGSIZE;
+ rule_locs[cnt] = rule->sw_idx;
+ cnt++;
+ }
+
+ return 0;
+}
+
+static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
+ void *rule_locs)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_GRXRINGS:
+ cmd->data = adapter->num_rx_queues;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXCLSRLCNT:
+ cmd->rule_cnt = adapter->fdir_filter_count;
+ ret = 0;
+ break;
+ case ETHTOOL_GRXCLSRULE:
+ ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd);
+ break;
+ case ETHTOOL_GRXCLSRLALL:
+ ret = ixgbe_get_ethtool_fdir_all(adapter, cmd,
+ (u32 *)rule_locs);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+ struct ixgbe_fdir_filter *input,
+ u16 sw_idx)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct hlist_node *node, *node2, *parent;
+ struct ixgbe_fdir_filter *rule;
+ int err = -EINVAL;
+
+ parent = NULL;
+ rule = NULL;
+
+ hlist_for_each_entry_safe(rule, node, node2,
+ &adapter->fdir_filter_list, fdir_node) {
+ /* hash found, or no matching entry */
+ if (rule->sw_idx >= sw_idx)
+ break;
+ parent = node;
+ }
+
+ /* if there is an old rule occupying our place remove it */
+ if (rule && (rule->sw_idx == sw_idx)) {
+ if (!input || (rule->filter.formatted.bkt_hash !=
+ input->filter.formatted.bkt_hash)) {
+ err = ixgbe_fdir_erase_perfect_filter_82599(hw,
+ &rule->filter,
+ sw_idx);
+ }
+
+ hlist_del(&rule->fdir_node);
+ kfree(rule);
+ adapter->fdir_filter_count--;
+ }
+
+ /*
+ * If no input this was a delete, err should be 0 if a rule was
+ * successfully found and removed from the list else -EINVAL
+ */
+ if (!input)
+ return err;
+
+ /* initialize node and set software index */
+ INIT_HLIST_NODE(&input->fdir_node);
+
+ /* add filter to the list */
+ if (parent)
+ hlist_add_after(parent, &input->fdir_node);
+ else
+ hlist_add_head(&input->fdir_node,
+ &adapter->fdir_filter_list);
+
+ /* update counts */
+ adapter->fdir_filter_count++;
+
+ return 0;
+}
+
+static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp,
+ u8 *flow_type)
+{
+ switch (fsp->flow_type & ~FLOW_EXT) {
+ case TCP_V4_FLOW:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+ break;
+ case UDP_V4_FLOW:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
+ break;
+ case SCTP_V4_FLOW:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
+ break;
+ case IP_USER_FLOW:
+ switch (fsp->h_u.usr_ip4_spec.proto) {
+ case IPPROTO_TCP:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+ break;
+ case IPPROTO_UDP:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
+ break;
+ case IPPROTO_SCTP:
+ *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
+ break;
+ case 0:
+ if (!fsp->m_u.usr_ip4_spec.proto) {
+ *flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
+ break;
+ }
+ default:
+ return 0;
+ }
+ break;
+ default:
+ return 0;
+ }
+
+ return 1;
+}
+
+static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+ struct ethtool_rxnfc *cmd)
+{
+ struct ethtool_rx_flow_spec *fsp =
+ (struct ethtool_rx_flow_spec *)&cmd->fs;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_fdir_filter *input;
+ union ixgbe_atr_input mask;
+ int err;
+
+ if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
+ return -EOPNOTSUPP;
+
+ /*
+ * Don't allow programming if the action is a queue greater than
+ * the number of online Rx queues.
+ */
+ if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
+ (fsp->ring_cookie >= adapter->num_rx_queues))
+ return -EINVAL;
+
+ /* Don't allow indexes to exist outside of available space */
+ if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) {
+ e_err(drv, "Location out of range\n");
+ return -EINVAL;
+ }
+
+ input = kzalloc(sizeof(*input), GFP_ATOMIC);
+ if (!input)
+ return -ENOMEM;
+
+ memset(&mask, 0, sizeof(union ixgbe_atr_input));
+
+ /* set SW index */
+ input->sw_idx = fsp->location;
+
+ /* record flow type */
+ if (!ixgbe_flowspec_to_flow_type(fsp,
+ &input->filter.formatted.flow_type)) {
+ e_err(drv, "Unrecognized flow type\n");
+ goto err_out;
+ }
+
+ mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
+ IXGBE_ATR_L4TYPE_MASK;
+
+ if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4)
+ mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK;
+
+ /* Copy input into formatted structures */
+ input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
+ mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src;
+ input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
+ mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst;
+ input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc;
+ mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc;
+ input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst;
+ mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst;
+
+ if (fsp->flow_type & FLOW_EXT) {
+ input->filter.formatted.vm_pool =
+ (unsigned char)ntohl(fsp->h_ext.data[1]);
+ mask.formatted.vm_pool =
+ (unsigned char)ntohl(fsp->m_ext.data[1]);
+ input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci;
+ mask.formatted.vlan_id = fsp->m_ext.vlan_tci;
+ input->filter.formatted.flex_bytes =
+ fsp->h_ext.vlan_etype;
+ mask.formatted.flex_bytes = fsp->m_ext.vlan_etype;
+ }
+
+ /* determine if we need to drop or route the packet */
+ if (fsp->ring_cookie == RX_CLS_FLOW_DISC)
+ input->action = IXGBE_FDIR_DROP_QUEUE;
+ else
+ input->action = fsp->ring_cookie;
+
+ spin_lock(&adapter->fdir_perfect_lock);
+
+ if (hlist_empty(&adapter->fdir_filter_list)) {
+ /* save mask and program input mask into HW */
+ memcpy(&adapter->fdir_mask, &mask, sizeof(mask));
+ err = ixgbe_fdir_set_input_mask_82599(hw, &mask);
+ if (err) {
+ e_err(drv, "Error writing mask\n");
+ goto err_out_w_lock;
+ }
+ } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) {
+ e_err(drv, "Only one mask supported per port\n");
+ goto err_out_w_lock;
+ }
+
+ /* apply mask and compute/store hash */
+ ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask);
+
+ /* program filters to filter memory */
+ err = ixgbe_fdir_write_perfect_filter_82599(hw,
+ &input->filter, input->sw_idx,
+ (input->action == IXGBE_FDIR_DROP_QUEUE) ?
+ IXGBE_FDIR_DROP_QUEUE :
+ adapter->rx_ring[input->action]->reg_idx);
+ if (err)
+ goto err_out_w_lock;
+
+ ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx);
+
+ spin_unlock(&adapter->fdir_perfect_lock);
+
+ return err;
+err_out_w_lock:
+ spin_unlock(&adapter->fdir_perfect_lock);
+err_out:
+ kfree(input);
+ return -EINVAL;
+}
+
+static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
+ struct ethtool_rxnfc *cmd)
+{
+ struct ethtool_rx_flow_spec *fsp =
+ (struct ethtool_rx_flow_spec *)&cmd->fs;
+ int err;
+
+ spin_lock(&adapter->fdir_perfect_lock);
+ err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, fsp->location);
+ spin_unlock(&adapter->fdir_perfect_lock);
+
+ return err;
+}
+
+static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int ret = -EOPNOTSUPP;
+
+ switch (cmd->cmd) {
+ case ETHTOOL_SRXCLSRLINS:
+ ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd);
+ break;
+ case ETHTOOL_SRXCLSRLDEL:
+ ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static const struct ethtool_ops ixgbe_ethtool_ops = {
+ .get_settings = ixgbe_get_settings,
+ .set_settings = ixgbe_set_settings,
+ .get_drvinfo = ixgbe_get_drvinfo,
+ .get_regs_len = ixgbe_get_regs_len,
+ .get_regs = ixgbe_get_regs,
+ .get_wol = ixgbe_get_wol,
+ .set_wol = ixgbe_set_wol,
+ .nway_reset = ixgbe_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_eeprom_len = ixgbe_get_eeprom_len,
+ .get_eeprom = ixgbe_get_eeprom,
+ .get_ringparam = ixgbe_get_ringparam,
+ .set_ringparam = ixgbe_set_ringparam,
+ .get_pauseparam = ixgbe_get_pauseparam,
+ .set_pauseparam = ixgbe_set_pauseparam,
+ .get_msglevel = ixgbe_get_msglevel,
+ .set_msglevel = ixgbe_set_msglevel,
+ .self_test = ixgbe_diag_test,
+ .get_strings = ixgbe_get_strings,
+ .set_phys_id = ixgbe_set_phys_id,
+ .get_sset_count = ixgbe_get_sset_count,
+ .get_ethtool_stats = ixgbe_get_ethtool_stats,
+ .get_coalesce = ixgbe_get_coalesce,
+ .set_coalesce = ixgbe_set_coalesce,
+ .get_rxnfc = ixgbe_get_rxnfc,
+ .set_rxnfc = ixgbe_set_rxnfc,
+};
+
+void ixgbe_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "ixgbe.h"
+#include <linux/if_ether.h>
+#include <linux/gfp.h>
+#include <linux/if_vlan.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/libfcoe.h>
+
+/**
+ * ixgbe_fcoe_clear_ddp - clear the given ddp context
+ * @ddp - ptr to the ixgbe_fcoe_ddp
+ *
+ * Returns : none
+ *
+ */
+static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
+{
+ ddp->len = 0;
+ ddp->err = 1;
+ ddp->udl = NULL;
+ ddp->udp = 0UL;
+ ddp->sgl = NULL;
+ ddp->sgc = 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_put - free the ddp context for a given xid
+ * @netdev: the corresponding net_device
+ * @xid: the xid that corresponding ddp will be freed
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_done
+ * and it is expected to be called by ULD, i.e., FCP layer of libfc
+ * to release the corresponding ddp context when the I/O is done.
+ *
+ * Returns : data length already ddp-ed in bytes
+ */
+int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
+{
+ int len = 0;
+ struct ixgbe_fcoe *fcoe;
+ struct ixgbe_adapter *adapter;
+ struct ixgbe_fcoe_ddp *ddp;
+ u32 fcbuff;
+
+ if (!netdev)
+ goto out_ddp_put;
+
+ if (xid >= IXGBE_FCOE_DDP_MAX)
+ goto out_ddp_put;
+
+ adapter = netdev_priv(netdev);
+ fcoe = &adapter->fcoe;
+ ddp = &fcoe->ddp[xid];
+ if (!ddp->udl)
+ goto out_ddp_put;
+
+ len = ddp->len;
+ /* if there an error, force to invalidate ddp context */
+ if (ddp->err) {
+ spin_lock_bh(&fcoe->lock);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW,
+ (xid | IXGBE_FCFLTRW_WE));
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
+ (xid | IXGBE_FCDMARW_WE));
+
+ /* guaranteed to be invalidated after 100us */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
+ (xid | IXGBE_FCDMARW_RE));
+ fcbuff = IXGBE_READ_REG(&adapter->hw, IXGBE_FCBUFF);
+ spin_unlock_bh(&fcoe->lock);
+ if (fcbuff & IXGBE_FCBUFF_VALID)
+ udelay(100);
+ }
+ if (ddp->sgl)
+ pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc,
+ DMA_FROM_DEVICE);
+ if (ddp->pool) {
+ pci_pool_free(ddp->pool, ddp->udl, ddp->udp);
+ ddp->pool = NULL;
+ }
+
+ ixgbe_fcoe_clear_ddp(ddp);
+
+out_ddp_put:
+ return len;
+}
+
+/**
+ * ixgbe_fcoe_ddp_setup - called to set up ddp context
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc,
+ int target_mode)
+{
+ struct ixgbe_adapter *adapter;
+ struct ixgbe_hw *hw;
+ struct ixgbe_fcoe *fcoe;
+ struct ixgbe_fcoe_ddp *ddp;
+ struct scatterlist *sg;
+ unsigned int i, j, dmacount;
+ unsigned int len;
+ static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
+ unsigned int firstoff = 0;
+ unsigned int lastsize;
+ unsigned int thisoff = 0;
+ unsigned int thislen = 0;
+ u32 fcbuff, fcdmarw, fcfltrw, fcrxctl;
+ dma_addr_t addr = 0;
+ struct pci_pool *pool;
+
+ if (!netdev || !sgl)
+ return 0;
+
+ adapter = netdev_priv(netdev);
+ if (xid >= IXGBE_FCOE_DDP_MAX) {
+ e_warn(drv, "xid=0x%x out-of-range\n", xid);
+ return 0;
+ }
+
+ /* no DDP if we are already down or resetting */
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return 0;
+
+ fcoe = &adapter->fcoe;
+ if (!fcoe->pool) {
+ e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
+ return 0;
+ }
+
+ ddp = &fcoe->ddp[xid];
+ if (ddp->sgl) {
+ e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
+ xid, ddp->sgl, ddp->sgc);
+ return 0;
+ }
+ ixgbe_fcoe_clear_ddp(ddp);
+
+ /* setup dma from scsi command sgl */
+ dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+ if (dmacount == 0) {
+ e_err(drv, "xid 0x%x DMA map error\n", xid);
+ return 0;
+ }
+
+ /* alloc the udl from per cpu ddp pool */
+ pool = *per_cpu_ptr(fcoe->pool, get_cpu());
+ ddp->udl = pci_pool_alloc(pool, GFP_ATOMIC, &ddp->udp);
+ if (!ddp->udl) {
+ e_err(drv, "failed allocated ddp context\n");
+ goto out_noddp_unmap;
+ }
+ ddp->pool = pool;
+ ddp->sgl = sgl;
+ ddp->sgc = sgc;
+
+ j = 0;
+ for_each_sg(sgl, sg, dmacount, i) {
+ addr = sg_dma_address(sg);
+ len = sg_dma_len(sg);
+ while (len) {
+ /* max number of buffers allowed in one DDP context */
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough descriptors\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
+ /* get the offset of length of current buffer */
+ thisoff = addr & ((dma_addr_t)bufflen - 1);
+ thislen = min((bufflen - thisoff), len);
+ /*
+ * all but the 1st buffer (j == 0)
+ * must be aligned on bufflen
+ */
+ if ((j != 0) && (thisoff))
+ goto out_noddp_free;
+ /*
+ * all but the last buffer
+ * ((i == (dmacount - 1)) && (thislen == len))
+ * must end at bufflen
+ */
+ if (((i != (dmacount - 1)) || (thislen != len))
+ && ((thislen + thisoff) != bufflen))
+ goto out_noddp_free;
+
+ ddp->udl[j] = (u64)(addr - thisoff);
+ /* only the first buffer may have none-zero offset */
+ if (j == 0)
+ firstoff = thisoff;
+ len -= thislen;
+ addr += thislen;
+ j++;
+ }
+ }
+ /* only the last buffer may have non-full bufflen */
+ lastsize = thisoff + thislen;
+
+ /*
+ * lastsize can not be buffer len.
+ * If it is then adding another buffer with lastsize = 1.
+ */
+ if (lastsize == bufflen) {
+ if (j >= IXGBE_BUFFCNT_MAX) {
+ e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
+ "not enough user buffers. We need an extra "
+ "buffer because lastsize is bufflen.\n",
+ xid, i, j, dmacount, (u64)addr);
+ goto out_noddp_free;
+ }
+
+ ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
+ j++;
+ lastsize = 1;
+ }
+ put_cpu();
+
+ fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
+ fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
+ fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
+ /* Set WRCONTX bit to allow DDP for target */
+ if (target_mode)
+ fcbuff |= (IXGBE_FCBUFF_WRCONTX);
+ fcbuff |= (IXGBE_FCBUFF_VALID);
+
+ fcdmarw = xid;
+ fcdmarw |= IXGBE_FCDMARW_WE;
+ fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT);
+
+ fcfltrw = xid;
+ fcfltrw |= IXGBE_FCFLTRW_WE;
+
+ /* program DMA context */
+ hw = &adapter->hw;
+ spin_lock_bh(&fcoe->lock);
+
+ /* turn on last frame indication for target mode as FCP_RSPtarget is
+ * supposed to send FCP_RSP when it is done. */
+ if (target_mode && !test_bit(__IXGBE_FCOE_TARGET, &fcoe->mode)) {
+ set_bit(__IXGBE_FCOE_TARGET, &fcoe->mode);
+ fcrxctl = IXGBE_READ_REG(hw, IXGBE_FCRXCTRL);
+ fcrxctl |= IXGBE_FCRXCTRL_LASTSEQH;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, fcrxctl);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32));
+ IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
+ IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
+ IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
+ /* program filter context */
+ IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
+ IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
+
+ spin_unlock_bh(&fcoe->lock);
+
+ return 1;
+
+out_noddp_free:
+ pci_pool_free(pool, ddp->udl, ddp->udp);
+ ixgbe_fcoe_clear_ddp(ddp);
+
+out_noddp_unmap:
+ pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
+ put_cpu();
+ return 0;
+}
+
+/**
+ * ixgbe_fcoe_ddp_get - called to set up ddp context in initiator mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
+{
+ return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0);
+}
+
+/**
+ * ixgbe_fcoe_ddp_target - called to set up ddp context in target mode
+ * @netdev: the corresponding net_device
+ * @xid: the exchange id requesting ddp
+ * @sgl: the scatter-gather list for this request
+ * @sgc: the number of scatter-gather items
+ *
+ * This is the implementation of net_device_ops.ndo_fcoe_ddp_target
+ * and is expected to be called from ULD, e.g., FCP layer of libfc
+ * to set up ddp for the corresponding xid of the given sglist for
+ * the corresponding I/O. The DDP in target mode is a write I/O request
+ * from the initiator.
+ *
+ * Returns : 1 for success and 0 for no ddp
+ */
+int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
+ struct scatterlist *sgl, unsigned int sgc)
+{
+ return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1);
+}
+
+/**
+ * ixgbe_fcoe_ddp - check ddp status and mark it done
+ * @adapter: ixgbe adapter
+ * @rx_desc: advanced rx descriptor
+ * @skb: the skb holding the received data
+ *
+ * This checks ddp status.
+ *
+ * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates
+ * not passing the skb to ULD, > 0 indicates is the length of data
+ * being ddped.
+ */
+int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
+ union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb,
+ u32 staterr)
+{
+ u16 xid;
+ u32 fctl;
+ u32 fceofe, fcerr, fcstat;
+ int rc = -EINVAL;
+ struct ixgbe_fcoe *fcoe;
+ struct ixgbe_fcoe_ddp *ddp;
+ struct fc_frame_header *fh;
+ struct fcoe_crc_eof *crc;
+
+ fcerr = (staterr & IXGBE_RXDADV_ERR_FCERR);
+ fceofe = (staterr & IXGBE_RXDADV_ERR_FCEOFE);
+ if (fcerr == IXGBE_FCERR_BADCRC)
+ skb_checksum_none_assert(skb);
+ else
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+
+ if (eth_hdr(skb)->h_proto == htons(ETH_P_8021Q))
+ fh = (struct fc_frame_header *)(skb->data +
+ sizeof(struct vlan_hdr) + sizeof(struct fcoe_hdr));
+ else
+ fh = (struct fc_frame_header *)(skb->data +
+ sizeof(struct fcoe_hdr));
+ fctl = ntoh24(fh->fh_f_ctl);
+ if (fctl & FC_FC_EX_CTX)
+ xid = be16_to_cpu(fh->fh_ox_id);
+ else
+ xid = be16_to_cpu(fh->fh_rx_id);
+
+ if (xid >= IXGBE_FCOE_DDP_MAX)
+ goto ddp_out;
+
+ fcoe = &adapter->fcoe;
+ ddp = &fcoe->ddp[xid];
+ if (!ddp->udl)
+ goto ddp_out;
+
+ if (fcerr | fceofe)
+ goto ddp_out;
+
+ fcstat = (staterr & IXGBE_RXDADV_STAT_FCSTAT);
+ if (fcstat) {
+ /* update length of DDPed data */
+ ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+ /* unmap the sg list when FCP_RSP is received */
+ if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
+ pci_unmap_sg(adapter->pdev, ddp->sgl,
+ ddp->sgc, DMA_FROM_DEVICE);
+ ddp->err = (fcerr | fceofe);
+ ddp->sgl = NULL;
+ ddp->sgc = 0;
+ }
+ /* return 0 to bypass going to ULD for DDPed data */
+ if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
+ rc = 0;
+ else if (ddp->len)
+ rc = ddp->len;
+ }
+ /* In target mode, check the last data frame of the sequence.
+ * For DDP in target mode, data is already DDPed but the header
+ * indication of the last data frame ould allow is to tell if we
+ * got all the data and the ULP can send FCP_RSP back, as this is
+ * not a full fcoe frame, we fill the trailer here so it won't be
+ * dropped by the ULP stack.
+ */
+ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
+ (fctl & FC_FC_END_SEQ)) {
+ crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
+ crc->fcoe_eof = FC_EOF_T;
+ }
+ddp_out:
+ return rc;
+}
+
+/**
+ * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO)
+ * @adapter: ixgbe adapter
+ * @tx_ring: tx desc ring
+ * @skb: associated skb
+ * @tx_flags: tx flags
+ * @hdr_len: hdr_len to be returned
+ *
+ * This sets up large send offload for FCoE
+ *
+ * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error
+ */
+int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+ u32 tx_flags, u8 *hdr_len)
+{
+ struct fc_frame_header *fh;
+ u32 vlan_macip_lens;
+ u32 fcoe_sof_eof = 0;
+ u32 mss_l4len_idx;
+ u8 sof, eof;
+
+ if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
+ dev_err(tx_ring->dev, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
+ skb_shinfo(skb)->gso_type);
+ return -EINVAL;
+ }
+
+ /* resets the header to point fcoe/fc */
+ skb_set_network_header(skb, skb->mac_len);
+ skb_set_transport_header(skb, skb->mac_len +
+ sizeof(struct fcoe_hdr));
+
+ /* sets up SOF and ORIS */
+ sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof;
+ switch (sof) {
+ case FC_SOF_I2:
+ fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_ORIS;
+ break;
+ case FC_SOF_I3:
+ fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF |
+ IXGBE_ADVTXD_FCOEF_ORIS;
+ break;
+ case FC_SOF_N2:
+ break;
+ case FC_SOF_N3:
+ fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF;
+ break;
+ default:
+ dev_warn(tx_ring->dev, "unknown sof = 0x%x\n", sof);
+ return -EINVAL;
+ }
+
+ /* the first byte of the last dword is EOF */
+ skb_copy_bits(skb, skb->len - 4, &eof, 1);
+ /* sets up EOF and ORIE */
+ switch (eof) {
+ case FC_EOF_N:
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
+ break;
+ case FC_EOF_T:
+ /* lso needs ORIE */
+ if (skb_is_gso(skb))
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N |
+ IXGBE_ADVTXD_FCOEF_ORIE;
+ else
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T;
+ break;
+ case FC_EOF_NI:
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI;
+ break;
+ case FC_EOF_A:
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
+ break;
+ default:
+ dev_warn(tx_ring->dev, "unknown eof = 0x%x\n", eof);
+ return -EINVAL;
+ }
+
+ /* sets up PARINC indicating data offset */
+ fh = (struct fc_frame_header *)skb_transport_header(skb);
+ if (fh->fh_f_ctl[2] & FC_FC_REL_OFF)
+ fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC;
+
+ /* include trailer in headlen as it is replicated per frame */
+ *hdr_len = sizeof(struct fcoe_crc_eof);
+
+ /* hdr_len includes fc_hdr if FCoE LSO is enabled */
+ if (skb_is_gso(skb))
+ *hdr_len += (skb_transport_offset(skb) +
+ sizeof(struct fc_frame_header));
+
+ /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */
+ mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
+ mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
+
+ /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+ vlan_macip_lens = skb_transport_offset(skb) +
+ sizeof(struct fc_frame_header);
+ vlan_macip_lens |= (skb_transport_offset(skb) - 4)
+ << IXGBE_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+ /* write context desc */
+ ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, fcoe_sof_eof,
+ IXGBE_ADVTXT_TUCMD_FCOE, mss_l4len_idx);
+
+ return skb_is_gso(skb);
+}
+
+static void ixgbe_fcoe_ddp_pools_free(struct ixgbe_fcoe *fcoe)
+{
+ unsigned int cpu;
+ struct pci_pool **pool;
+
+ for_each_possible_cpu(cpu) {
+ pool = per_cpu_ptr(fcoe->pool, cpu);
+ if (*pool)
+ pci_pool_destroy(*pool);
+ }
+ free_percpu(fcoe->pool);
+ fcoe->pool = NULL;
+}
+
+static void ixgbe_fcoe_ddp_pools_alloc(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+ unsigned int cpu;
+ struct pci_pool **pool;
+ char pool_name[32];
+
+ fcoe->pool = alloc_percpu(struct pci_pool *);
+ if (!fcoe->pool)
+ return;
+
+ /* allocate pci pool for each cpu */
+ for_each_possible_cpu(cpu) {
+ snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
+ pool = per_cpu_ptr(fcoe->pool, cpu);
+ *pool = pci_pool_create(pool_name,
+ adapter->pdev, IXGBE_FCPTR_MAX,
+ IXGBE_FCPTR_ALIGN, PAGE_SIZE);
+ if (!*pool) {
+ e_err(drv, "failed to alloc DDP pool on cpu:%d\n", cpu);
+ ixgbe_fcoe_ddp_pools_free(fcoe);
+ return;
+ }
+ }
+}
+
+/**
+ * ixgbe_configure_fcoe - configures registers for fcoe at start
+ * @adapter: ptr to ixgbe adapter
+ *
+ * This sets up FCoE related registers
+ *
+ * Returns : none
+ */
+void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
+{
+ int i, fcoe_q, fcoe_i;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+ if (!fcoe->pool) {
+ spin_lock_init(&fcoe->lock);
+
+ ixgbe_fcoe_ddp_pools_alloc(adapter);
+ if (!fcoe->pool) {
+ e_err(drv, "failed to alloc percpu fcoe DDP pools\n");
+ return;
+ }
+
+ /* Extra buffer to be shared by all DDPs for HW work around */
+ fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
+ if (fcoe->extra_ddp_buffer == NULL) {
+ e_err(drv, "failed to allocated extra DDP buffer\n");
+ goto out_ddp_pools;
+ }
+
+ fcoe->extra_ddp_buffer_dma =
+ dma_map_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma)) {
+ e_err(drv, "failed to map extra DDP buffer\n");
+ goto out_extra_ddp_buffer;
+ }
+ }
+
+ /* Enable L2 eth type filter for FCoE */
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
+ (ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
+ /* Enable L2 eth type filter for FIP */
+ IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP),
+ (ETH_P_FIP | IXGBE_ETQF_FILTER_EN));
+ if (adapter->ring_feature[RING_F_FCOE].indices) {
+ /* Use multiple rx queues for FCoE by redirection table */
+ for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
+ fcoe_i = f->mask + i % f->indices;
+ fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
+ } else {
+ /* Use single rx queue for FCoE */
+ fcoe_i = f->mask;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+ }
+ /* send FIP frames to the first FCoE queue */
+ fcoe_i = f->mask;
+ fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
+ IXGBE_ETQS_QUEUE_EN |
+ (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
+ IXGBE_FCRXCTRL_FCOELLI |
+ IXGBE_FCRXCTRL_FCCRCBO |
+ (FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
+ return;
+
+out_extra_ddp_buffer:
+ kfree(fcoe->extra_ddp_buffer);
+out_ddp_pools:
+ ixgbe_fcoe_ddp_pools_free(fcoe);
+}
+
+/**
+ * ixgbe_cleanup_fcoe - release all fcoe ddp context resources
+ * @adapter : ixgbe adapter
+ *
+ * Cleans up outstanding ddp context resources
+ *
+ * Returns : none
+ */
+void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
+{
+ int i;
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+ if (!fcoe->pool)
+ return;
+
+ for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
+ ixgbe_fcoe_ddp_put(adapter->netdev, i);
+ dma_unmap_single(&adapter->pdev->dev,
+ fcoe->extra_ddp_buffer_dma,
+ IXGBE_FCBUFF_MIN,
+ DMA_FROM_DEVICE);
+ kfree(fcoe->extra_ddp_buffer);
+ ixgbe_fcoe_ddp_pools_free(fcoe);
+}
+
+/**
+ * ixgbe_fcoe_enable - turn on FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns on FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_enable(struct net_device *netdev)
+{
+ int rc = -EINVAL;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+ goto out_enable;
+
+ atomic_inc(&fcoe->refcnt);
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ goto out_enable;
+
+ e_info(drv, "Enabling FCoE offload features.\n");
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+
+ adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+ netdev->features |= NETIF_F_FCOE_CRC;
+ netdev->features |= NETIF_F_FSO;
+ netdev->features |= NETIF_F_FCOE_MTU;
+ netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+
+ ixgbe_init_interrupt_scheme(adapter);
+ netdev_features_change(netdev);
+
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ rc = 0;
+
+out_enable:
+ return rc;
+}
+
+/**
+ * ixgbe_fcoe_disable - turn off FCoE offload feature
+ * @netdev: the corresponding netdev
+ *
+ * Turns off FCoE offload feature in 82599.
+ *
+ * Returns : 0 indicates success or -EINVAL on failure
+ */
+int ixgbe_fcoe_disable(struct net_device *netdev)
+{
+ int rc = -EINVAL;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_fcoe *fcoe = &adapter->fcoe;
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
+ goto out_disable;
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+ goto out_disable;
+
+ if (!atomic_dec_and_test(&fcoe->refcnt))
+ goto out_disable;
+
+ e_info(drv, "Disabling FCoE offload features.\n");
+ netdev->features &= ~NETIF_F_FCOE_CRC;
+ netdev->features &= ~NETIF_F_FSO;
+ netdev->features &= ~NETIF_F_FCOE_MTU;
+ netdev->fcoe_ddp_xid = 0;
+ netdev_features_change(netdev);
+
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_stop(netdev);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
+ ixgbe_cleanup_fcoe(adapter);
+ ixgbe_init_interrupt_scheme(adapter);
+
+ if (netif_running(netdev))
+ netdev->netdev_ops->ndo_open(netdev);
+ rc = 0;
+
+out_disable:
+ return rc;
+}
+
+/**
+ * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
+ * @netdev : ixgbe adapter
+ * @wwn : the world wide name
+ * @type: the type of world wide name
+ *
+ * Returns the node or port world wide name if both the prefix and the san
+ * mac address are valid, then the wwn is formed based on the NAA-2 for
+ * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3).
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+ int rc = -EINVAL;
+ u16 prefix = 0xffff;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+ switch (type) {
+ case NETDEV_FCOE_WWNN:
+ prefix = mac->wwnn_prefix;
+ break;
+ case NETDEV_FCOE_WWPN:
+ prefix = mac->wwpn_prefix;
+ break;
+ default:
+ break;
+ }
+
+ if ((prefix != 0xffff) &&
+ is_valid_ether_addr(mac->san_addr)) {
+ *wwn = ((u64) prefix << 48) |
+ ((u64) mac->san_addr[0] << 40) |
+ ((u64) mac->san_addr[1] << 32) |
+ ((u64) mac->san_addr[2] << 24) |
+ ((u64) mac->san_addr[3] << 16) |
+ ((u64) mac->san_addr[4] << 8) |
+ ((u64) mac->san_addr[5]);
+ rc = 0;
+ }
+ return rc;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_FCOE_H
+#define _IXGBE_FCOE_H
+
+#include <scsi/fc/fc_fs.h>
+#include <scsi/fc/fc_fcoe.h>
+
+/* shift bits within STAT fo FCSTAT */
+#define IXGBE_RXDADV_FCSTAT_SHIFT 4
+
+/* ddp user buffer */
+#define IXGBE_BUFFCNT_MAX 256 /* 8 bits bufcnt */
+#define IXGBE_FCPTR_ALIGN 16
+#define IXGBE_FCPTR_MAX (IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t))
+#define IXGBE_FCBUFF_4KB 0x0
+#define IXGBE_FCBUFF_8KB 0x1
+#define IXGBE_FCBUFF_16KB 0x2
+#define IXGBE_FCBUFF_64KB 0x3
+#define IXGBE_FCBUFF_MAX 65536 /* 64KB max */
+#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */
+#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */
+
+/* Default traffic class to use for FCoE */
+#define IXGBE_FCOE_DEFTC 3
+
+/* fcerr */
+#define IXGBE_FCERR_BADCRC 0x00100000
+
+/* FCoE DDP for target mode */
+#define __IXGBE_FCOE_TARGET 1
+
+struct ixgbe_fcoe_ddp {
+ int len;
+ u32 err;
+ unsigned int sgc;
+ struct scatterlist *sgl;
+ dma_addr_t udp;
+ u64 *udl;
+ struct pci_pool *pool;
+};
+
+struct ixgbe_fcoe {
+ struct pci_pool **pool;
+ atomic_t refcnt;
+ spinlock_t lock;
+ struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
+ unsigned char *extra_ddp_buffer;
+ dma_addr_t extra_ddp_buffer_dma;
+ unsigned long mode;
+#ifdef CONFIG_IXGBE_DCB
+ u8 up;
+#endif
+};
+
+#endif /* _IXGBE_FCOE_H */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/interrupt.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/sctp.h>
+#include <linux/pkt_sched.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/prefetch.h>
+#include <scsi/fc/fc_fcoe.h>
+
+#include "ixgbe.h"
+#include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
+#include "ixgbe_sriov.h"
+
+char ixgbe_driver_name[] = "ixgbe";
+static const char ixgbe_driver_string[] =
+ "Intel(R) 10 Gigabit PCI Express Network Driver";
+#define MAJ 3
+#define MIN 4
+#define BUILD 8
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+ __stringify(BUILD) "-k"
+const char ixgbe_driver_version[] = DRV_VERSION;
+static const char ixgbe_copyright[] =
+ "Copyright (c) 1999-2011 Intel Corporation.";
+
+static const struct ixgbe_info *ixgbe_info_tbl[] = {
+ [board_82598] = &ixgbe_82598_info,
+ [board_82599] = &ixgbe_82599_info,
+ [board_X540] = &ixgbe_X540_info,
+};
+
+/* ixgbe_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX),
+ board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T),
+ board_X540 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2),
+ board_82599 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS),
+ board_82599 },
+
+ /* required last entry */
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
+
+#ifdef CONFIG_IXGBE_DCA
+static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
+ void *p);
+static struct notifier_block dca_notifier = {
+ .notifier_call = ixgbe_notify_dca,
+ .next = NULL,
+ .priority = 0
+};
+#endif
+
+#ifdef CONFIG_PCI_IOV
+static unsigned int max_vfs;
+module_param(max_vfs, uint, 0);
+MODULE_PARM_DESC(max_vfs,
+ "Maximum number of virtual functions to allocate per physical function");
+#endif /* CONFIG_PCI_IOV */
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+
+static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 gcr;
+ u32 gpie;
+ u32 vmdctl;
+
+#ifdef CONFIG_PCI_IOV
+ /* disable iov and allow time for transactions to clear */
+ pci_disable_sriov(adapter->pdev);
+#endif
+
+ /* turn off device IOV mode */
+ gcr = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+ gcr &= ~(IXGBE_GCR_EXT_SRIOV);
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr);
+ gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
+ gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+
+ /* set default pool back to 0 */
+ vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
+ IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* take a breather then clean up driver data */
+ msleep(100);
+
+ kfree(adapter->vfinfo);
+ adapter->vfinfo = NULL;
+
+ adapter->num_vfs = 0;
+ adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+}
+
+static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
+{
+ if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
+ !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state))
+ schedule_work(&adapter->service_task);
+}
+
+static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
+{
+ BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
+
+ /* flush memory to make sure state is correct before next watchog */
+ smp_mb__before_clear_bit();
+ clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+}
+
+struct ixgbe_reg_info {
+ u32 ofs;
+ char *name;
+};
+
+static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = {
+
+ /* General Registers */
+ {IXGBE_CTRL, "CTRL"},
+ {IXGBE_STATUS, "STATUS"},
+ {IXGBE_CTRL_EXT, "CTRL_EXT"},
+
+ /* Interrupt Registers */
+ {IXGBE_EICR, "EICR"},
+
+ /* RX Registers */
+ {IXGBE_SRRCTL(0), "SRRCTL"},
+ {IXGBE_DCA_RXCTRL(0), "DRXCTL"},
+ {IXGBE_RDLEN(0), "RDLEN"},
+ {IXGBE_RDH(0), "RDH"},
+ {IXGBE_RDT(0), "RDT"},
+ {IXGBE_RXDCTL(0), "RXDCTL"},
+ {IXGBE_RDBAL(0), "RDBAL"},
+ {IXGBE_RDBAH(0), "RDBAH"},
+
+ /* TX Registers */
+ {IXGBE_TDBAL(0), "TDBAL"},
+ {IXGBE_TDBAH(0), "TDBAH"},
+ {IXGBE_TDLEN(0), "TDLEN"},
+ {IXGBE_TDH(0), "TDH"},
+ {IXGBE_TDT(0), "TDT"},
+ {IXGBE_TXDCTL(0), "TXDCTL"},
+
+ /* List Terminator */
+ {}
+};
+
+
+/*
+ * ixgbe_regdump - register printout routine
+ */
+static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo)
+{
+ int i = 0, j = 0;
+ char rname[16];
+ u32 regs[64];
+
+ switch (reginfo->ofs) {
+ case IXGBE_SRRCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
+ break;
+ case IXGBE_DCA_RXCTRL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
+ break;
+ case IXGBE_RDLEN(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
+ break;
+ case IXGBE_RDH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
+ break;
+ case IXGBE_RDT(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
+ break;
+ case IXGBE_RXDCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
+ break;
+ case IXGBE_RDBAL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
+ break;
+ case IXGBE_RDBAH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
+ break;
+ case IXGBE_TDBAL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
+ break;
+ case IXGBE_TDBAH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
+ break;
+ case IXGBE_TDLEN(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
+ break;
+ case IXGBE_TDH(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
+ break;
+ case IXGBE_TDT(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
+ break;
+ case IXGBE_TXDCTL(0):
+ for (i = 0; i < 64; i++)
+ regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+ break;
+ default:
+ pr_info("%-15s %08x\n", reginfo->name,
+ IXGBE_READ_REG(hw, reginfo->ofs));
+ return;
+ }
+
+ for (i = 0; i < 8; i++) {
+ snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7);
+ pr_err("%-15s", rname);
+ for (j = 0; j < 8; j++)
+ pr_cont(" %08x", regs[i*8+j]);
+ pr_cont("\n");
+ }
+
+}
+
+/*
+ * ixgbe_dump - Print registers, tx-rings and rx-rings
+ */
+static void ixgbe_dump(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_reg_info *reginfo;
+ int n = 0;
+ struct ixgbe_ring *tx_ring;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ union ixgbe_adv_tx_desc *tx_desc;
+ struct my_u0 { u64 a; u64 b; } *u0;
+ struct ixgbe_ring *rx_ring;
+ union ixgbe_adv_rx_desc *rx_desc;
+ struct ixgbe_rx_buffer *rx_buffer_info;
+ u32 staterr;
+ int i = 0;
+
+ if (!netif_msg_hw(adapter))
+ return;
+
+ /* Print netdevice Info */
+ if (netdev) {
+ dev_info(&adapter->pdev->dev, "Net device Info\n");
+ pr_info("Device Name state "
+ "trans_start last_rx\n");
+ pr_info("%-15s %016lX %016lX %016lX\n",
+ netdev->name,
+ netdev->state,
+ netdev->trans_start,
+ netdev->last_rx);
+ }
+
+ /* Print Registers */
+ dev_info(&adapter->pdev->dev, "Register Dump\n");
+ pr_info(" Register Name Value\n");
+ for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl;
+ reginfo->name; reginfo++) {
+ ixgbe_regdump(hw, reginfo);
+ }
+
+ /* Print TX Ring Summary */
+ if (!netdev || !netif_running(netdev))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ tx_buffer_info =
+ &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
+ pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
+ n, tx_ring->next_to_use, tx_ring->next_to_clean,
+ (u64)tx_buffer_info->dma,
+ tx_buffer_info->length,
+ tx_buffer_info->next_to_watch,
+ (u64)tx_buffer_info->time_stamp);
+ }
+
+ /* Print TX Rings */
+ if (!netif_msg_tx_done(adapter))
+ goto rx_ring_summary;
+
+ dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
+
+ /* Transmit Descriptor Formats
+ *
+ * Advanced Transmit Descriptor
+ * +--------------------------------------------------------------+
+ * 0 | Buffer Address [63:0] |
+ * +--------------------------------------------------------------+
+ * 8 | PAYLEN | PORTS | IDX | STA | DCMD |DTYP | RSV | DTALEN |
+ * +--------------------------------------------------------------+
+ * 63 46 45 40 39 36 35 32 31 24 23 20 19 0
+ */
+
+ for (n = 0; n < adapter->num_tx_queues; n++) {
+ tx_ring = adapter->tx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("T [desc] [address 63:0 ] "
+ "[PlPOIdStDDt Ln] [bi->dma ] "
+ "leng ntw timestamp bi->skb\n");
+
+ for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
+ tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ u0 = (struct my_u0 *)tx_desc;
+ pr_info("T [0x%03X] %016llX %016llX %016llX"
+ " %04X %3X %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)tx_buffer_info->dma,
+ tx_buffer_info->length,
+ tx_buffer_info->next_to_watch,
+ (u64)tx_buffer_info->time_stamp,
+ tx_buffer_info->skb);
+ if (i == tx_ring->next_to_use &&
+ i == tx_ring->next_to_clean)
+ pr_cont(" NTC/U\n");
+ else if (i == tx_ring->next_to_use)
+ pr_cont(" NTU\n");
+ else if (i == tx_ring->next_to_clean)
+ pr_cont(" NTC\n");
+ else
+ pr_cont("\n");
+
+ if (netif_msg_pktdata(adapter) &&
+ tx_buffer_info->dma != 0)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(tx_buffer_info->dma),
+ tx_buffer_info->length, true);
+ }
+ }
+
+ /* Print RX Rings Summary */
+rx_ring_summary:
+ dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
+ pr_info("Queue [NTU] [NTC]\n");
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info("%5d %5X %5X\n",
+ n, rx_ring->next_to_use, rx_ring->next_to_clean);
+ }
+
+ /* Print RX Rings */
+ if (!netif_msg_rx_status(adapter))
+ goto exit;
+
+ dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
+
+ /* Advanced Receive Descriptor (Read) Format
+ * 63 1 0
+ * +-----------------------------------------------------+
+ * 0 | Packet Buffer Address [63:1] |A0/NSE|
+ * +----------------------------------------------+------+
+ * 8 | Header Buffer Address [63:1] | DD |
+ * +-----------------------------------------------------+
+ *
+ *
+ * Advanced Receive Descriptor (Write-Back) Format
+ *
+ * 63 48 47 32 31 30 21 20 16 15 4 3 0
+ * +------------------------------------------------------+
+ * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
+ * | Checksum Ident | | | | Type | Type |
+ * +------------------------------------------------------+
+ * 8 | VLAN Tag | Length | Extended Error | Extended Status |
+ * +------------------------------------------------------+
+ * 63 48 47 32 31 20 19 0
+ */
+ for (n = 0; n < adapter->num_rx_queues; n++) {
+ rx_ring = adapter->rx_ring[n];
+ pr_info("------------------------------------\n");
+ pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
+ pr_info("------------------------------------\n");
+ pr_info("R [desc] [ PktBuf A0] "
+ "[ HeadBuf DD] [bi->dma ] [bi->skb] "
+ "<-- Adv Rx Read format\n");
+ pr_info("RWB[desc] [PcsmIpSHl PtRs] "
+ "[vl er S cks ln] ---------------- [bi->skb] "
+ "<-- Adv Rx Write-Back format\n");
+
+ for (i = 0; i < rx_ring->count; i++) {
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+ rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
+ u0 = (struct my_u0 *)rx_desc;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ if (staterr & IXGBE_RXD_STAT_DD) {
+ /* Descriptor Done */
+ pr_info("RWB[0x%03X] %016llX "
+ "%016llX ---------------- %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ rx_buffer_info->skb);
+ } else {
+ pr_info("R [0x%03X] %016llX "
+ "%016llX %016llX %p", i,
+ le64_to_cpu(u0->a),
+ le64_to_cpu(u0->b),
+ (u64)rx_buffer_info->dma,
+ rx_buffer_info->skb);
+
+ if (netif_msg_pktdata(adapter)) {
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(rx_buffer_info->dma),
+ rx_ring->rx_buf_len, true);
+
+ if (rx_ring->rx_buf_len
+ < IXGBE_RXBUFFER_2048)
+ print_hex_dump(KERN_INFO, "",
+ DUMP_PREFIX_ADDRESS, 16, 1,
+ phys_to_virt(
+ rx_buffer_info->page_dma +
+ rx_buffer_info->page_offset
+ ),
+ PAGE_SIZE/2, true);
+ }
+ }
+
+ if (i == rx_ring->next_to_use)
+ pr_cont(" NTU\n");
+ else if (i == rx_ring->next_to_clean)
+ pr_cont(" NTC\n");
+ else
+ pr_cont("\n");
+
+ }
+ }
+
+exit:
+ return;
+}
+
+static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
+{
+ u32 ctrl_ext;
+
+ /* Let firmware take over control of h/w */
+ ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
+ ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD);
+}
+
+static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter)
+{
+ u32 ctrl_ext;
+
+ /* Let firmware know the driver has taken over */
+ ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
+ ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD);
+}
+
+/*
+ * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ */
+static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
+ u8 queue, u8 msix_vector)
+{
+ u32 ivar, index;
+ struct ixgbe_hw *hw = &adapter->hw;
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+ if (direction == -1)
+ direction = 0;
+ index = (((direction * 64) + queue) >> 2) & 0x1F;
+ ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
+ ivar &= ~(0xFF << (8 * (queue & 0x3)));
+ ivar |= (msix_vector << (8 * (queue & 0x3)));
+ IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ if (direction == -1) {
+ /* other causes */
+ msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+ index = ((queue & 1) * 8);
+ ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC);
+ ivar &= ~(0xFF << index);
+ ivar |= (msix_vector << index);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar);
+ break;
+ } else {
+ /* tx or rx causes */
+ msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+ index = ((16 * (queue & 1)) + (8 * direction));
+ ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1));
+ ivar &= ~(0xFF << index);
+ ivar |= (msix_vector << index);
+ IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar);
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
+ u64 qmask)
+{
+ u32 mask;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ mask = (qmask & 0xFFFFFFFF);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
+ mask = (qmask >> 32);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
+ break;
+ default:
+ break;
+ }
+}
+
+void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
+ struct ixgbe_tx_buffer *tx_buffer_info)
+{
+ if (tx_buffer_info->dma) {
+ if (tx_buffer_info->mapped_as_page)
+ dma_unmap_page(tx_ring->dev,
+ tx_buffer_info->dma,
+ tx_buffer_info->length,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_single(tx_ring->dev,
+ tx_buffer_info->dma,
+ tx_buffer_info->length,
+ DMA_TO_DEVICE);
+ tx_buffer_info->dma = 0;
+ }
+ if (tx_buffer_info->skb) {
+ dev_kfree_skb_any(tx_buffer_info->skb);
+ tx_buffer_info->skb = NULL;
+ }
+ tx_buffer_info->time_stamp = 0;
+ /* tx_buffer_info must be completely set up in the transmit path */
+}
+
+static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_hw_stats *hwstats = &adapter->stats;
+ u32 data = 0;
+ u32 xoff[8] = {0};
+ int i;
+
+ if ((hw->fc.current_mode == ixgbe_fc_full) ||
+ (hw->fc.current_mode == ixgbe_fc_rx_pause)) {
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+ break;
+ default:
+ data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
+ }
+ hwstats->lxoffrxc += data;
+
+ /* refill credits (no tx hang) if we received xoff */
+ if (!data)
+ return;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ clear_bit(__IXGBE_HANG_CHECK_ARMED,
+ &adapter->tx_ring[i]->state);
+ return;
+ } else if (!(adapter->dcb_cfg.pfc_mode_enable))
+ return;
+
+ /* update stats for each tc, only valid with PFC enabled */
+ for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+ break;
+ default:
+ xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
+ }
+ hwstats->pxoffrxc[i] += xoff[i];
+ }
+
+ /* disarm tx queues that have received xoff frames */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+ u8 tc = tx_ring->dcb_tc;
+
+ if (xoff[tc])
+ clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
+ }
+}
+
+static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring)
+{
+ return ring->tx_stats.completed;
+}
+
+static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(ring->netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ u32 head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx));
+ u32 tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx));
+
+ if (head != tail)
+ return (head < tail) ?
+ tail - head : (tail + ring->count - head);
+
+ return 0;
+}
+
+static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring)
+{
+ u32 tx_done = ixgbe_get_tx_completed(tx_ring);
+ u32 tx_done_old = tx_ring->tx_stats.tx_done_old;
+ u32 tx_pending = ixgbe_get_tx_pending(tx_ring);
+ bool ret = false;
+
+ clear_check_for_tx_hang(tx_ring);
+
+ /*
+ * Check for a hung queue, but be thorough. This verifies
+ * that a transmit has been completed since the previous
+ * check AND there is at least one packet pending. The
+ * ARMED bit is set to indicate a potential hang. The
+ * bit is cleared if a pause frame is received to remove
+ * false hang detection due to PFC or 802.3x frames. By
+ * requiring this to fail twice we avoid races with
+ * pfc clearing the ARMED bit and conditions where we
+ * run the check_tx_hang logic with a transmit completion
+ * pending but without time to complete it yet.
+ */
+ if ((tx_done_old == tx_done) && tx_pending) {
+ /* make sure it is true for two checks in a row */
+ ret = test_and_set_bit(__IXGBE_HANG_CHECK_ARMED,
+ &tx_ring->state);
+ } else {
+ /* update completed stats and continue */
+ tx_ring->tx_stats.tx_done_old = tx_done;
+ /* reset the countdown */
+ clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
+ }
+
+ return ret;
+}
+
+/**
+ * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout
+ * @adapter: driver private struct
+ **/
+static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
+{
+
+ /* Do the reset outside of interrupt context */
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+ ixgbe_service_event_schedule(adapter);
+ }
+}
+
+/**
+ * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
+ * @q_vector: structure containing interrupt and ring information
+ * @tx_ring: tx ring to clean
+ **/
+static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
+ struct ixgbe_ring *tx_ring)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ unsigned int total_bytes = 0, total_packets = 0;
+ u16 i, eop, count = 0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->tx_buffer_info[i].next_to_watch;
+ eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+
+ while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
+ (count < q_vector->tx.work_limit)) {
+ bool cleaned = false;
+ rmb(); /* read buffer_info after eop_desc */
+ for ( ; !cleaned; count++) {
+ tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+
+ tx_desc->wb.status = 0;
+ cleaned = (i == eop);
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ if (cleaned && tx_buffer_info->skb) {
+ total_bytes += tx_buffer_info->bytecount;
+ total_packets += tx_buffer_info->gso_segs;
+ }
+
+ ixgbe_unmap_and_free_tx_resource(tx_ring,
+ tx_buffer_info);
+ }
+
+ tx_ring->tx_stats.completed++;
+ eop = tx_ring->tx_buffer_info[i].next_to_watch;
+ eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+ tx_ring->stats.bytes += total_bytes;
+ tx_ring->stats.packets += total_packets;
+ u64_stats_update_begin(&tx_ring->syncp);
+ q_vector->tx.total_bytes += total_bytes;
+ q_vector->tx.total_packets += total_packets;
+ u64_stats_update_end(&tx_ring->syncp);
+
+ if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) {
+ /* schedule immediate reset if we believe we hung */
+ struct ixgbe_hw *hw = &adapter->hw;
+ tx_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
+ e_err(drv, "Detected Tx Unit Hang\n"
+ " Tx Queue <%d>\n"
+ " TDH, TDT <%x>, <%x>\n"
+ " next_to_use <%x>\n"
+ " next_to_clean <%x>\n"
+ "tx_buffer_info[next_to_clean]\n"
+ " time_stamp <%lx>\n"
+ " jiffies <%lx>\n",
+ tx_ring->queue_index,
+ IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)),
+ IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)),
+ tx_ring->next_to_use, eop,
+ tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
+
+ netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+
+ e_info(probe,
+ "tx hang %d detected on queue %d, resetting adapter\n",
+ adapter->tx_timeout_count + 1, tx_ring->queue_index);
+
+ /* schedule immediate reset if we believe we hung */
+ ixgbe_tx_timeout_reset(adapter);
+
+ /* the adapter is about to reset, no point in enabling stuff */
+ return true;
+ }
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(count && netif_carrier_ok(tx_ring->netdev) &&
+ (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+ if (__netif_subqueue_stopped(tx_ring->netdev, tx_ring->queue_index) &&
+ !test_bit(__IXGBE_DOWN, &adapter->state)) {
+ netif_wake_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ }
+ }
+
+ return count < q_vector->tx.work_limit;
+}
+
+#ifdef CONFIG_IXGBE_DCA
+static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *rx_ring,
+ int cpu)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 rxctrl;
+ u8 reg_idx = rx_ring->reg_idx;
+
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(reg_idx));
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
+ rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599;
+ rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
+ IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599);
+ break;
+ default:
+ break;
+ }
+ rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
+ rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
+ rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
+}
+
+static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *tx_ring,
+ int cpu)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 txctrl;
+ u8 reg_idx = tx_ring->reg_idx;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(reg_idx));
+ txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
+ txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx));
+ txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
+ txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
+ IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
+ break;
+ default:
+ break;
+ }
+}
+
+static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ int cpu = get_cpu();
+ long r_idx;
+ int i;
+
+ if (q_vector->cpu == cpu)
+ goto out_no_update;
+
+ r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->tx.count; i++) {
+ ixgbe_update_tx_dca(adapter, adapter->tx_ring[r_idx], cpu);
+ r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rx.count; i++) {
+ ixgbe_update_rx_dca(adapter, adapter->rx_ring[r_idx], cpu);
+ r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ q_vector->cpu = cpu;
+out_no_update:
+ put_cpu();
+}
+
+static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
+{
+ int num_q_vectors;
+ int i;
+
+ if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
+ return;
+
+ /* always use CB2 mode, difference is masked in the CB driver */
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+ num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ else
+ num_q_vectors = 1;
+
+ for (i = 0; i < num_q_vectors; i++) {
+ adapter->q_vector[i]->cpu = -1;
+ ixgbe_update_dca(adapter->q_vector[i]);
+ }
+}
+
+static int __ixgbe_notify_dca(struct device *dev, void *data)
+{
+ struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
+ unsigned long event = *(unsigned long *)data;
+
+ if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE))
+ return 0;
+
+ switch (event) {
+ case DCA_PROVIDER_ADD:
+ /* if we're already enabled, don't do it again */
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ break;
+ if (dca_add_requester(dev) == 0) {
+ adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+ ixgbe_setup_dca(adapter);
+ break;
+ }
+ /* Fall Through since DCA is disabled. */
+ case DCA_PROVIDER_REMOVE:
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+ dca_remove_requester(dev);
+ adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+ }
+ break;
+ }
+
+ return 0;
+}
+#endif /* CONFIG_IXGBE_DCA */
+
+static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb)
+{
+ skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
+}
+
+/**
+ * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
+ * @adapter: address of board private structure
+ * @rx_desc: advanced rx descriptor
+ *
+ * Returns : true if it is FCoE pkt
+ */
+static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
+ union ixgbe_adv_rx_desc *rx_desc)
+{
+ __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+ return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
+ (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
+ IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
+}
+
+/**
+ * ixgbe_receive_skb - Send a completed packet up the stack
+ * @adapter: board private structure
+ * @skb: packet to send up
+ * @status: hardware indication of status of receive
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ * @rx_desc: rx descriptor
+ **/
+static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
+ struct sk_buff *skb, u8 status,
+ struct ixgbe_ring *ring,
+ union ixgbe_adv_rx_desc *rx_desc)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct napi_struct *napi = &q_vector->napi;
+ bool is_vlan = (status & IXGBE_RXD_STAT_VP);
+ u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ if (is_vlan && (tag & VLAN_VID_MASK))
+ __vlan_hwaccel_put_tag(skb, tag);
+
+ if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
+ napi_gro_receive(napi, skb);
+ else
+ netif_rx(skb);
+}
+
+/**
+ * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum
+ * @adapter: address of board private structure
+ * @status_err: hardware indication of status of receive
+ * @skb: skb currently being received and modified
+ * @status_err: status error value of last descriptor in packet
+ **/
+static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
+ union ixgbe_adv_rx_desc *rx_desc,
+ struct sk_buff *skb,
+ u32 status_err)
+{
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Rx csum disabled */
+ if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
+ return;
+
+ /* if IP and error */
+ if ((status_err & IXGBE_RXD_STAT_IPCS) &&
+ (status_err & IXGBE_RXDADV_ERR_IPE)) {
+ adapter->hw_csum_rx_error++;
+ return;
+ }
+
+ if (!(status_err & IXGBE_RXD_STAT_L4CS))
+ return;
+
+ if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+ u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+ /*
+ * 82599 errata, UDP frames with a 0 checksum can be marked as
+ * checksum errors.
+ */
+ if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+ (adapter->hw.mac.type == ixgbe_mac_82599EB))
+ return;
+
+ adapter->hw_csum_rx_error++;
+ return;
+ }
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val)
+{
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ writel(val, rx_ring->tail);
+}
+
+/**
+ * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @rx_ring: ring to place buffers on
+ * @cleaned_count: number of buffers to replace
+ **/
+void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
+{
+ union ixgbe_adv_rx_desc *rx_desc;
+ struct ixgbe_rx_buffer *bi;
+ struct sk_buff *skb;
+ u16 i = rx_ring->next_to_use;
+
+ /* do nothing if no valid netdev defined */
+ if (!rx_ring->netdev)
+ return;
+
+ while (cleaned_count--) {
+ rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
+ bi = &rx_ring->rx_buffer_info[i];
+ skb = bi->skb;
+
+ if (!skb) {
+ skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
+ rx_ring->rx_buf_len);
+ if (!skb) {
+ rx_ring->rx_stats.alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+ /* initialize queue mapping */
+ skb_record_rx_queue(skb, rx_ring->queue_index);
+ bi->skb = skb;
+ }
+
+ if (!bi->dma) {
+ bi->dma = dma_map_single(rx_ring->dev,
+ skb->data,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev, bi->dma)) {
+ rx_ring->rx_stats.alloc_rx_buff_failed++;
+ bi->dma = 0;
+ goto no_buffers;
+ }
+ }
+
+ if (ring_is_ps_enabled(rx_ring)) {
+ if (!bi->page) {
+ bi->page = netdev_alloc_page(rx_ring->netdev);
+ if (!bi->page) {
+ rx_ring->rx_stats.alloc_rx_page_failed++;
+ goto no_buffers;
+ }
+ }
+
+ if (!bi->page_dma) {
+ /* use a half page if we're re-using */
+ bi->page_offset ^= PAGE_SIZE / 2;
+ bi->page_dma = dma_map_page(rx_ring->dev,
+ bi->page,
+ bi->page_offset,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(rx_ring->dev,
+ bi->page_dma)) {
+ rx_ring->rx_stats.alloc_rx_page_failed++;
+ bi->page_dma = 0;
+ goto no_buffers;
+ }
+ }
+
+ /* Refresh the desc even if buffer_addrs didn't change
+ * because each write-back erases this info. */
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+ } else {
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
+ rx_desc->read.hdr_addr = 0;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ ixgbe_release_rx_desc(rx_ring, i);
+ }
+}
+
+static inline u16 ixgbe_get_hlen(union ixgbe_adv_rx_desc *rx_desc)
+{
+ /* HW will not DMA in data larger than the given buffer, even if it
+ * parses the (NFS, of course) header to be larger. In that case, it
+ * fills the header buffer and spills the rest into the page.
+ */
+ u16 hdr_info = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info);
+ u16 hlen = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
+ IXGBE_RXDADV_HDRBUFLEN_SHIFT;
+ if (hlen > IXGBE_RX_HDR_SIZE)
+ hlen = IXGBE_RX_HDR_SIZE;
+ return hlen;
+}
+
+/**
+ * ixgbe_transform_rsc_queue - change rsc queue into a full packet
+ * @skb: pointer to the last skb in the rsc queue
+ *
+ * This function changes a queue full of hw rsc buffers into a completed
+ * packet. It uses the ->prev pointers to find the first packet and then
+ * turns it into the frag list owner.
+ **/
+static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
+{
+ unsigned int frag_list_size = 0;
+ unsigned int skb_cnt = 1;
+
+ while (skb->prev) {
+ struct sk_buff *prev = skb->prev;
+ frag_list_size += skb->len;
+ skb->prev = NULL;
+ skb = prev;
+ skb_cnt++;
+ }
+
+ skb_shinfo(skb)->frag_list = skb->next;
+ skb->next = NULL;
+ skb->len += frag_list_size;
+ skb->data_len += frag_list_size;
+ skb->truesize += frag_list_size;
+ IXGBE_RSC_CB(skb)->skb_cnt = skb_cnt;
+
+ return skb;
+}
+
+static inline bool ixgbe_get_rsc_state(union ixgbe_adv_rx_desc *rx_desc)
+{
+ return !!(le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
+ IXGBE_RXDADV_RSCCNT_MASK);
+}
+
+static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
+ struct ixgbe_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
+ struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
+ struct sk_buff *skb;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+ const int current_node = numa_node_id();
+#ifdef IXGBE_FCOE
+ int ddp_bytes = 0;
+#endif /* IXGBE_FCOE */
+ u32 staterr;
+ u16 i;
+ u16 cleaned_count = 0;
+ bool pkt_is_rsc = false;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+ while (staterr & IXGBE_RXD_STAT_DD) {
+ u32 upper_len = 0;
+
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
+ skb = rx_buffer_info->skb;
+ rx_buffer_info->skb = NULL;
+ prefetch(skb->data);
+
+ if (ring_is_rsc_enabled(rx_ring))
+ pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
+
+ /* if this is a skb from previous receive DMA will be 0 */
+ if (rx_buffer_info->dma) {
+ u16 hlen;
+ if (pkt_is_rsc &&
+ !(staterr & IXGBE_RXD_STAT_EOP) &&
+ !skb->prev) {
+ /*
+ * When HWRSC is enabled, delay unmapping
+ * of the first packet. It carries the
+ * header information, HW may still
+ * access the header after the writeback.
+ * Only unmap it when EOP is reached
+ */
+ IXGBE_RSC_CB(skb)->delay_unmap = true;
+ IXGBE_RSC_CB(skb)->dma = rx_buffer_info->dma;
+ } else {
+ dma_unmap_single(rx_ring->dev,
+ rx_buffer_info->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ }
+ rx_buffer_info->dma = 0;
+
+ if (ring_is_ps_enabled(rx_ring)) {
+ hlen = ixgbe_get_hlen(rx_desc);
+ upper_len = le16_to_cpu(rx_desc->wb.upper.length);
+ } else {
+ hlen = le16_to_cpu(rx_desc->wb.upper.length);
+ }
+
+ skb_put(skb, hlen);
+ } else {
+ /* assume packet split since header is unmapped */
+ upper_len = le16_to_cpu(rx_desc->wb.upper.length);
+ }
+
+ if (upper_len) {
+ dma_unmap_page(rx_ring->dev,
+ rx_buffer_info->page_dma,
+ PAGE_SIZE / 2,
+ DMA_FROM_DEVICE);
+ rx_buffer_info->page_dma = 0;
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ rx_buffer_info->page,
+ rx_buffer_info->page_offset,
+ upper_len);
+
+ if ((page_count(rx_buffer_info->page) == 1) &&
+ (page_to_nid(rx_buffer_info->page) == current_node))
+ get_page(rx_buffer_info->page);
+ else
+ rx_buffer_info->page = NULL;
+
+ skb->len += upper_len;
+ skb->data_len += upper_len;
+ skb->truesize += upper_len;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+
+ next_rxd = IXGBE_RX_DESC_ADV(rx_ring, i);
+ prefetch(next_rxd);
+ cleaned_count++;
+
+ if (pkt_is_rsc) {
+ u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
+ IXGBE_RXDADV_NEXTP_SHIFT;
+ next_buffer = &rx_ring->rx_buffer_info[nextp];
+ } else {
+ next_buffer = &rx_ring->rx_buffer_info[i];
+ }
+
+ if (!(staterr & IXGBE_RXD_STAT_EOP)) {
+ if (ring_is_ps_enabled(rx_ring)) {
+ rx_buffer_info->skb = next_buffer->skb;
+ rx_buffer_info->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ } else {
+ skb->next = next_buffer->skb;
+ skb->next->prev = skb;
+ }
+ rx_ring->rx_stats.non_eop_descs++;
+ goto next_desc;
+ }
+
+ if (skb->prev) {
+ skb = ixgbe_transform_rsc_queue(skb);
+ /* if we got here without RSC the packet is invalid */
+ if (!pkt_is_rsc) {
+ __pskb_trim(skb, 0);
+ rx_buffer_info->skb = skb;
+ goto next_desc;
+ }
+ }
+
+ if (ring_is_rsc_enabled(rx_ring)) {
+ if (IXGBE_RSC_CB(skb)->delay_unmap) {
+ dma_unmap_single(rx_ring->dev,
+ IXGBE_RSC_CB(skb)->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ IXGBE_RSC_CB(skb)->dma = 0;
+ IXGBE_RSC_CB(skb)->delay_unmap = false;
+ }
+ }
+ if (pkt_is_rsc) {
+ if (ring_is_ps_enabled(rx_ring))
+ rx_ring->rx_stats.rsc_count +=
+ skb_shinfo(skb)->nr_frags;
+ else
+ rx_ring->rx_stats.rsc_count +=
+ IXGBE_RSC_CB(skb)->skb_cnt;
+ rx_ring->rx_stats.rsc_flush++;
+ }
+
+ /* ERR_MASK will only have valid bits if EOP set */
+ if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) {
+ dev_kfree_skb_any(skb);
+ goto next_desc;
+ }
+
+ ixgbe_rx_checksum(adapter, rx_desc, skb, staterr);
+ if (adapter->netdev->features & NETIF_F_RXHASH)
+ ixgbe_rx_hash(rx_desc, skb);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ skb->protocol = eth_type_trans(skb, rx_ring->netdev);
+#ifdef IXGBE_FCOE
+ /* if ddp, not passing to ULD unless for FCP_RSP or error */
+ if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
+ ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
+ staterr);
+ if (!ddp_bytes)
+ goto next_desc;
+ }
+#endif /* IXGBE_FCOE */
+ ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ (*work_done)++;
+ if (*work_done >= work_to_do)
+ break;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
+ ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ rx_ring->next_to_clean = i;
+ cleaned_count = ixgbe_desc_unused(rx_ring);
+
+ if (cleaned_count)
+ ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
+
+#ifdef IXGBE_FCOE
+ /* include DDPed FCoE data */
+ if (ddp_bytes > 0) {
+ unsigned int mss;
+
+ mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) -
+ sizeof(struct fc_frame_header) -
+ sizeof(struct fcoe_crc_eof);
+ if (mss > 512)
+ mss &= ~511;
+ total_rx_bytes += ddp_bytes;
+ total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
+ }
+#endif /* IXGBE_FCOE */
+
+ u64_stats_update_begin(&rx_ring->syncp);
+ rx_ring->stats.packets += total_rx_packets;
+ rx_ring->stats.bytes += total_rx_bytes;
+ u64_stats_update_end(&rx_ring->syncp);
+ q_vector->rx.total_packets += total_rx_packets;
+ q_vector->rx.total_bytes += total_rx_bytes;
+}
+
+static int ixgbe_clean_rxonly(struct napi_struct *, int);
+/**
+ * ixgbe_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * ixgbe_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_q_vector *q_vector;
+ int i, q_vectors, v_idx, r_idx;
+ u32 mask;
+
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /*
+ * Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ for (v_idx = 0; v_idx < q_vectors; v_idx++) {
+ q_vector = adapter->q_vector[v_idx];
+ /* XXX for_each_set_bit(...) */
+ r_idx = find_first_bit(q_vector->rx.idx,
+ adapter->num_rx_queues);
+
+ for (i = 0; i < q_vector->rx.count; i++) {
+ u8 reg_idx = adapter->rx_ring[r_idx]->reg_idx;
+ ixgbe_set_ivar(adapter, 0, reg_idx, v_idx);
+ r_idx = find_next_bit(q_vector->rx.idx,
+ adapter->num_rx_queues,
+ r_idx + 1);
+ }
+ r_idx = find_first_bit(q_vector->tx.idx,
+ adapter->num_tx_queues);
+
+ for (i = 0; i < q_vector->tx.count; i++) {
+ u8 reg_idx = adapter->tx_ring[r_idx]->reg_idx;
+ ixgbe_set_ivar(adapter, 1, reg_idx, v_idx);
+ r_idx = find_next_bit(q_vector->tx.idx,
+ adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ if (q_vector->tx.count && !q_vector->rx.count)
+ /* tx only */
+ q_vector->eitr = adapter->tx_eitr_param;
+ else if (q_vector->rx.count)
+ /* rx or mixed */
+ q_vector->eitr = adapter->rx_eitr_param;
+
+ ixgbe_write_eitr(q_vector);
+ /* If ATR is enabled, set interrupt affinity */
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+ /*
+ * Allocate the affinity_hint cpumask, assign the mask
+ * for this vector, and set our affinity_hint for
+ * this irq.
+ */
+ if (!alloc_cpumask_var(&q_vector->affinity_mask,
+ GFP_KERNEL))
+ return;
+ cpumask_set_cpu(v_idx, q_vector->affinity_mask);
+ irq_set_affinity_hint(adapter->msix_entries[v_idx].vector,
+ q_vector->affinity_mask);
+ }
+ }
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
+ v_idx);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ ixgbe_set_ivar(adapter, -1, 1, v_idx);
+ break;
+
+ default:
+ break;
+ }
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
+
+ /* set up to autoclear timer, and the vectors */
+ mask = IXGBE_EIMS_ENABLE_MASK;
+ if (adapter->num_vfs)
+ mask &= ~(IXGBE_EIMS_OTHER |
+ IXGBE_EIMS_MAILBOX |
+ IXGBE_EIMS_LSC);
+ else
+ mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * ixgbe_update_itr - update the dynamic ITR value based on statistics
+ * @q_vector: structure containing interrupt and ring information
+ * @ring_container: structure containing ring performance data
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ * this functionality is controlled by the InterruptThrottleRate module
+ * parameter (see ixgbe_param.c)
+ **/
+static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
+ struct ixgbe_ring_container *ring_container)
+{
+ u64 bytes_perint;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ int bytes = ring_container->total_bytes;
+ int packets = ring_container->total_packets;
+ u32 timepassed_us;
+ u8 itr_setting = ring_container->itr;
+
+ if (packets == 0)
+ return;
+
+ /* simple throttlerate management
+ * 0-20MB/s lowest (100000 ints/s)
+ * 20-100MB/s low (20000 ints/s)
+ * 100-1249MB/s bulk (8000 ints/s)
+ */
+ /* what was last interrupt timeslice? */
+ timepassed_us = 1000000/q_vector->eitr;
+ bytes_perint = bytes / timepassed_us; /* bytes/usec */
+
+ switch (itr_setting) {
+ case lowest_latency:
+ if (bytes_perint > adapter->eitr_low)
+ itr_setting = low_latency;
+ break;
+ case low_latency:
+ if (bytes_perint > adapter->eitr_high)
+ itr_setting = bulk_latency;
+ else if (bytes_perint <= adapter->eitr_low)
+ itr_setting = lowest_latency;
+ break;
+ case bulk_latency:
+ if (bytes_perint <= adapter->eitr_high)
+ itr_setting = low_latency;
+ break;
+ }
+
+ /* clear work counters since we have the values we need */
+ ring_container->total_bytes = 0;
+ ring_container->total_packets = 0;
+
+ /* write updated itr to ring container */
+ ring_container->itr = itr_setting;
+}
+
+/**
+ * ixgbe_write_eitr - write EITR register in hardware specific way
+ * @q_vector: structure containing interrupt and ring information
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update EITR registers at runtime. Hardware
+ * specific quirks/differences are taken care of here.
+ */
+void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
+{
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int v_idx = q_vector->v_idx;
+ u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ /* must write high and low 16 bits to reset counter */
+ itr_reg |= (itr_reg << 16);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ /*
+ * 82599 and X540 can support a value of zero, so allow it for
+ * max interrupt rate, but there is an errata where it can
+ * not be zero with RSC
+ */
+ if (itr_reg == 8 &&
+ !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
+ itr_reg = 0;
+
+ /*
+ * set the WDIS bit to not clear the timer bits and cause an
+ * immediate assertion of the interrupt
+ */
+ itr_reg |= IXGBE_EITR_CNT_WDIS;
+ break;
+ default:
+ break;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
+}
+
+static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector)
+{
+ u32 new_itr = q_vector->eitr;
+ u8 current_itr;
+
+ ixgbe_update_itr(q_vector, &q_vector->tx);
+ ixgbe_update_itr(q_vector, &q_vector->rx);
+
+ current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 100000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ new_itr = 8000;
+ break;
+ default:
+ break;
+ }
+
+ if (new_itr != q_vector->eitr) {
+ /* do an exponential smoothing */
+ new_itr = ((q_vector->eitr * 9) + new_itr)/10;
+
+ /* save the algorithm value here */
+ q_vector->eitr = new_itr;
+
+ ixgbe_write_eitr(q_vector);
+ }
+}
+
+/**
+ * ixgbe_check_overtemp_subtask - check for over tempurature
+ * @adapter: pointer to adapter
+ **/
+static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 eicr = adapter->interrupt_event;
+
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+ !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+
+ switch (hw->device_id) {
+ case IXGBE_DEV_ID_82599_T3_LOM:
+ /*
+ * Since the warning interrupt is for both ports
+ * we don't have to check if:
+ * - This interrupt wasn't for our port.
+ * - We may have missed the interrupt so always have to
+ * check if we got a LSC
+ */
+ if (!(eicr & IXGBE_EICR_GPI_SDP0) &&
+ !(eicr & IXGBE_EICR_LSC))
+ return;
+
+ if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) {
+ u32 autoneg;
+ bool link_up = false;
+
+ hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
+
+ if (link_up)
+ return;
+ }
+
+ /* Check if this is not due to overtemp */
+ if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
+ return;
+
+ break;
+ default:
+ if (!(eicr & IXGBE_EICR_GPI_SDP0))
+ return;
+ break;
+ }
+ e_crit(drv,
+ "Network adapter has been stopped because it has over heated. "
+ "Restart the computer. If the problem persists, "
+ "power off the system and replace the adapter\n");
+
+ adapter->interrupt_event = 0;
+}
+
+static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
+ (eicr & IXGBE_EICR_GPI_SDP1)) {
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
+ /* write to clear the interrupt */
+ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
+ }
+}
+
+static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (eicr & IXGBE_EICR_GPI_SDP2) {
+ /* Clear the interrupt */
+ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+
+ if (eicr & IXGBE_EICR_GPI_SDP1) {
+ /* Clear the interrupt */
+ IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+}
+
+static void ixgbe_check_lsc(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ adapter->lsc_int++;
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
+ IXGBE_WRITE_FLUSH(hw);
+ ixgbe_service_event_schedule(adapter);
+ }
+}
+
+static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
+{
+ struct ixgbe_adapter *adapter = data;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 eicr;
+
+ /*
+ * Workaround for Silicon errata. Use clear-by-write instead
+ * of clear-by-read. Reading with EICS will return the
+ * interrupt causes without clearing, which later be done
+ * with the write to EICR.
+ */
+ eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
+ IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr);
+
+ if (eicr & IXGBE_EICR_LSC)
+ ixgbe_check_lsc(adapter);
+
+ if (eicr & IXGBE_EICR_MAILBOX)
+ ixgbe_msg_task(adapter);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ /* Handle Flow Director Full threshold interrupt */
+ if (eicr & IXGBE_EICR_FLOW_DIR) {
+ int reinit_count = 0;
+ int i;
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *ring = adapter->tx_ring[i];
+ if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
+ &ring->state))
+ reinit_count++;
+ }
+ if (reinit_count) {
+ /* no more flow director interrupts until after init */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR);
+ eicr &= ~IXGBE_EICR_FLOW_DIR;
+ adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+ ixgbe_check_sfp_event(adapter, eicr);
+ if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+ ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->interrupt_event = eicr;
+ adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ ixgbe_check_fan_failure(adapter, eicr);
+
+ /* re-enable the original interrupt state, no lsc, no queues */
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr &
+ ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE));
+
+ return IRQ_HANDLED;
+}
+
+static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
+ u64 qmask)
+{
+ u32 mask;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ mask = (qmask & 0xFFFFFFFF);
+ if (mask)
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
+ mask = (qmask >> 32);
+ if (mask)
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
+ break;
+ default:
+ break;
+ }
+ /* skip the flush */
+}
+
+static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
+ u64 qmask)
+{
+ u32 mask;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ mask = (qmask & 0xFFFFFFFF);
+ if (mask)
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
+ mask = (qmask >> 32);
+ if (mask)
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
+ break;
+ default:
+ break;
+ }
+ /* skip the flush */
+}
+
+static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
+{
+ struct ixgbe_q_vector *q_vector = data;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *tx_ring;
+ int i, r_idx;
+
+ if (!q_vector->tx.count)
+ return IRQ_HANDLED;
+
+ r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->tx.count; i++) {
+ tx_ring = adapter->tx_ring[r_idx];
+ r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ /* EIAM disabled interrupts (on this vector) for us */
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues)
+ * @irq: unused
+ * @data: pointer to our q_vector struct for this interrupt vector
+ **/
+static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
+{
+ struct ixgbe_q_vector *q_vector = data;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *rx_ring;
+ int r_idx;
+ int i;
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_dca(q_vector);
+#endif
+
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rx.count; i++) {
+ rx_ring = adapter->rx_ring[r_idx];
+ r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ if (!q_vector->rx.count)
+ return IRQ_HANDLED;
+
+ /* EIAM disabled interrupts (on this vector) for us */
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
+{
+ struct ixgbe_q_vector *q_vector = data;
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *ring;
+ int r_idx;
+ int i;
+
+ if (!q_vector->tx.count && !q_vector->rx.count)
+ return IRQ_HANDLED;
+
+ r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->tx.count; i++) {
+ ring = adapter->tx_ring[r_idx];
+ r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rx.count; i++) {
+ ring = adapter->rx_ring[r_idx];
+ r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ /* EIAM disabled interrupts (on this vector) for us */
+ napi_schedule(&q_vector->napi);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ixgbe_clean_rxonly - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
+{
+ struct ixgbe_q_vector *q_vector =
+ container_of(napi, struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *rx_ring = NULL;
+ int work_done = 0;
+ long r_idx;
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_dca(q_vector);
+#endif
+
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ rx_ring = adapter->rx_ring[r_idx];
+
+ ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+
+ /* If all Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->rx_itr_setting & 1)
+ ixgbe_set_itr(q_vector);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable_queues(adapter,
+ ((u64)1 << q_vector->v_idx));
+ }
+
+ return work_done;
+}
+
+/**
+ * ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean more than one rx queue associated with a
+ * q_vector.
+ **/
+static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
+{
+ struct ixgbe_q_vector *q_vector =
+ container_of(napi, struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *ring = NULL;
+ int work_done = 0, i;
+ long r_idx;
+ bool tx_clean_complete = true;
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_dca(q_vector);
+#endif
+
+ r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->tx.count; i++) {
+ ring = adapter->tx_ring[r_idx];
+ tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
+ r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ /* attempt to distribute budget to each queue fairly, but don't allow
+ * the budget to go below 1 because we'll exit polling */
+ budget /= (q_vector->rx.count ?: 1);
+ budget = max(budget, 1);
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rx.count; i++) {
+ ring = adapter->rx_ring[r_idx];
+ ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
+ r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
+ ring = adapter->rx_ring[r_idx];
+ /* If all Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->rx_itr_setting & 1)
+ ixgbe_set_itr(q_vector);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable_queues(adapter,
+ ((u64)1 << q_vector->v_idx));
+ return 0;
+ }
+
+ return work_done;
+}
+
+/**
+ * ixgbe_clean_txonly - msix (aka one shot) tx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
+{
+ struct ixgbe_q_vector *q_vector =
+ container_of(napi, struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ struct ixgbe_ring *tx_ring = NULL;
+ int work_done = 0;
+ long r_idx;
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_dca(q_vector);
+#endif
+
+ r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
+ tx_ring = adapter->tx_ring[r_idx];
+
+ if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
+ work_done = budget;
+
+ /* If all Tx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->tx_itr_setting & 1)
+ ixgbe_set_itr(q_vector);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable_queues(adapter,
+ ((u64)1 << q_vector->v_idx));
+ }
+
+ return work_done;
+}
+
+static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
+ int r_idx)
+{
+ struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+ struct ixgbe_ring *rx_ring = a->rx_ring[r_idx];
+
+ set_bit(r_idx, q_vector->rx.idx);
+ q_vector->rx.count++;
+ rx_ring->q_vector = q_vector;
+}
+
+static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
+ int t_idx)
+{
+ struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
+ struct ixgbe_ring *tx_ring = a->tx_ring[t_idx];
+
+ set_bit(t_idx, q_vector->tx.idx);
+ q_vector->tx.count++;
+ tx_ring->q_vector = q_vector;
+ q_vector->tx.work_limit = a->tx_work_limit;
+}
+
+/**
+ * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function maps descriptor rings to the queue-specific vectors
+ * we were allotted through the MSI-X enabling code. Ideally, we'd have
+ * one vector per ring/queue, but on a constrained vector budget, we
+ * group the rings as "efficiently" as possible. You would add new
+ * mapping configurations in here.
+ **/
+static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter)
+{
+ int q_vectors;
+ int v_start = 0;
+ int rxr_idx = 0, txr_idx = 0;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int i, j;
+ int rqpv, tqpv;
+ int err = 0;
+
+ /* No mapping required if MSI-X is disabled. */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ goto out;
+
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /*
+ * The ideal configuration...
+ * We have enough vectors to map one per queue.
+ */
+ if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
+ for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
+ map_vector_to_rxq(adapter, v_start, rxr_idx);
+
+ for (; txr_idx < txr_remaining; v_start++, txr_idx++)
+ map_vector_to_txq(adapter, v_start, txr_idx);
+
+ goto out;
+ }
+
+ /*
+ * If we don't have enough vectors for a 1-to-1
+ * mapping, we'll have to group them so there are
+ * multiple queues per vector.
+ */
+ /* Re-adjusting *qpv takes care of the remainder. */
+ for (i = v_start; i < q_vectors; i++) {
+ rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
+ for (j = 0; j < rqpv; j++) {
+ map_vector_to_rxq(adapter, i, rxr_idx);
+ rxr_idx++;
+ rxr_remaining--;
+ }
+ tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
+ for (j = 0; j < tqpv; j++) {
+ map_vector_to_txq(adapter, i, txr_idx);
+ txr_idx++;
+ txr_remaining--;
+ }
+ }
+out:
+ return err;
+}
+
+/**
+ * ixgbe_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ixgbe_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irqreturn_t (*handler)(int, void *);
+ int i, vector, q_vectors, err;
+ int ri = 0, ti = 0;
+
+ /* Decrement for Other and TCP Timer vectors */
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ err = ixgbe_map_rings_to_vectors(adapter);
+ if (err)
+ return err;
+
+#define SET_HANDLER(_v) (((_v)->rx.count && (_v)->tx.count) \
+ ? &ixgbe_msix_clean_many : \
+ (_v)->rx.count ? &ixgbe_msix_clean_rx : \
+ (_v)->tx.count ? &ixgbe_msix_clean_tx : \
+ NULL)
+ for (vector = 0; vector < q_vectors; vector++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
+ handler = SET_HANDLER(q_vector);
+
+ if (handler == &ixgbe_msix_clean_rx) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-%s-%d", netdev->name, "rx", ri++);
+ } else if (handler == &ixgbe_msix_clean_tx) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-%s-%d", netdev->name, "tx", ti++);
+ } else if (handler == &ixgbe_msix_clean_many) {
+ snprintf(q_vector->name, sizeof(q_vector->name) - 1,
+ "%s-%s-%d", netdev->name, "TxRx", ri++);
+ ti++;
+ } else {
+ /* skip this unused q_vector */
+ continue;
+ }
+ err = request_irq(adapter->msix_entries[vector].vector,
+ handler, 0, q_vector->name,
+ q_vector);
+ if (err) {
+ e_err(probe, "request_irq failed for MSIX interrupt "
+ "Error: %d\n", err);
+ goto free_queue_irqs;
+ }
+ }
+
+ sprintf(adapter->lsc_int_name, "%s:lsc", netdev->name);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ ixgbe_msix_lsc, 0, adapter->lsc_int_name, adapter);
+ if (err) {
+ e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
+ goto free_queue_irqs;
+ }
+
+ return 0;
+
+free_queue_irqs:
+ for (i = vector - 1; i >= 0; i--)
+ free_irq(adapter->msix_entries[--vector].vector,
+ adapter->q_vector[i]);
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ return err;
+}
+
+/**
+ * ixgbe_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
+ bool flush)
+{
+ u32 mask;
+
+ mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
+ if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
+ mask |= IXGBE_EIMS_GPI_SDP0;
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
+ mask |= IXGBE_EIMS_GPI_SDP1;
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ mask |= IXGBE_EIMS_ECC;
+ mask |= IXGBE_EIMS_GPI_SDP1;
+ mask |= IXGBE_EIMS_GPI_SDP2;
+ if (adapter->num_vfs)
+ mask |= IXGBE_EIMS_MAILBOX;
+ break;
+ default:
+ break;
+ }
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+ mask |= IXGBE_EIMS_FLOW_DIR;
+
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
+ if (queues)
+ ixgbe_irq_enable_queues(adapter, ~0);
+ if (flush)
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+
+ if (adapter->num_vfs > 32) {
+ u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
+ }
+}
+
+/**
+ * ixgbe_intr - legacy mode Interrupt Handler
+ * @irq: interrupt number
+ * @data: pointer to a network interface device structure
+ **/
+static irqreturn_t ixgbe_intr(int irq, void *data)
+{
+ struct ixgbe_adapter *adapter = data;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
+ u32 eicr;
+
+ /*
+ * Workaround for silicon errata on 82598. Mask the interrupts
+ * before the read of EICR.
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+ /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read
+ * therefore no explict interrupt disable is necessary */
+ eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
+ if (!eicr) {
+ /*
+ * shared interrupt alert!
+ * make sure interrupts are enabled because the read will
+ * have disabled interrupts due to EIAM
+ * finish the workaround of silicon errata on 82598. Unmask
+ * the interrupt that we masked before the EICR read.
+ */
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable(adapter, true, true);
+ return IRQ_NONE; /* Not our interrupt */
+ }
+
+ if (eicr & IXGBE_EICR_LSC)
+ ixgbe_check_lsc(adapter);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ ixgbe_check_sfp_event(adapter, eicr);
+ if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
+ ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
+ if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
+ adapter->interrupt_event = eicr;
+ adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
+ ixgbe_service_event_schedule(adapter);
+ }
+ }
+ break;
+ default:
+ break;
+ }
+
+ ixgbe_check_fan_failure(adapter, eicr);
+
+ if (napi_schedule_prep(&(q_vector->napi))) {
+ /* would disable interrupts here but EIAM disabled it */
+ __napi_schedule(&(q_vector->napi));
+ }
+
+ /*
+ * re-enable link(maybe) and non-queue interrupts, no flush.
+ * ixgbe_poll will re-enable the queue interrupts
+ */
+
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable(adapter, false, false);
+
+ return IRQ_HANDLED;
+}
+
+static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
+{
+ int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ for (i = 0; i < q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ bitmap_zero(q_vector->rx.idx, MAX_RX_QUEUES);
+ bitmap_zero(q_vector->tx.idx, MAX_TX_QUEUES);
+ q_vector->rx.count = 0;
+ q_vector->tx.count = 0;
+ }
+}
+
+/**
+ * ixgbe_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int err;
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ err = ixgbe_request_msix_irqs(adapter);
+ } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+ err = request_irq(adapter->pdev->irq, ixgbe_intr, 0,
+ netdev->name, adapter);
+ } else {
+ err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED,
+ netdev->name, adapter);
+ }
+
+ if (err)
+ e_err(probe, "request_irq failed, Error %d\n", err);
+
+ return err;
+}
+
+static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
+{
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int i, q_vectors;
+
+ q_vectors = adapter->num_msix_vectors;
+
+ i = q_vectors - 1;
+ free_irq(adapter->msix_entries[i].vector, adapter);
+
+ i--;
+ for (; i >= 0; i--) {
+ /* free only the irqs that were actually requested */
+ if (!adapter->q_vector[i]->rx.count &&
+ !adapter->q_vector[i]->tx.count)
+ continue;
+
+ free_irq(adapter->msix_entries[i].vector,
+ adapter->q_vector[i]);
+ }
+
+ ixgbe_reset_q_vectors(adapter);
+ } else {
+ free_irq(adapter->pdev->irq, adapter);
+ }
+}
+
+/**
+ * ixgbe_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
+{
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB:
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
+ if (adapter->num_vfs > 32)
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
+ break;
+ default:
+ break;
+ }
+ IXGBE_WRITE_FLUSH(&adapter->hw);
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int i;
+ for (i = 0; i < adapter->num_msix_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+ } else {
+ synchronize_irq(adapter->pdev->irq);
+ }
+}
+
+/**
+ * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
+ *
+ **/
+static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
+ EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
+
+ ixgbe_set_ivar(adapter, 0, 0, 0);
+ ixgbe_set_ivar(adapter, 1, 0, 0);
+
+ map_vector_to_rxq(adapter, 0, 0);
+ map_vector_to_txq(adapter, 0, 0);
+
+ e_info(hw, "Legacy interrupt IVAR setup done\n");
+}
+
+/**
+ * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset
+ * @adapter: board private structure
+ * @ring: structure containing ring specific data
+ *
+ * Configure the Tx descriptor ring after a reset.
+ **/
+void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u64 tdba = ring->dma;
+ int wait_loop = 10;
+ u32 txdctl;
+ u8 reg_idx = ring->reg_idx;
+
+ /* disable queue to avoid issues while updating state */
+ txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx),
+ txdctl & ~IXGBE_TXDCTL_ENABLE);
+ IXGBE_WRITE_FLUSH(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx),
+ (tdba & DMA_BIT_MASK(32)));
+ IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx),
+ ring->count * sizeof(union ixgbe_adv_tx_desc));
+ IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0);
+ ring->tail = hw->hw_addr + IXGBE_TDT(reg_idx);
+
+ /* configure fetching thresholds */
+ if (adapter->rx_itr_setting == 0) {
+ /* cannot set wthresh when itr==0 */
+ txdctl &= ~0x007F0000;
+ } else {
+ /* enable WTHRESH=8 descriptors, to encourage burst writeback */
+ txdctl |= (8 << 16);
+ }
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ /* PThresh workaround for Tx hang with DFP enabled. */
+ txdctl |= 32;
+ }
+
+ /* reinitialize flowdirector state */
+ if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
+ adapter->atr_sample_rate) {
+ ring->atr_sample_rate = adapter->atr_sample_rate;
+ ring->atr_count = 0;
+ set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
+ } else {
+ ring->atr_sample_rate = 0;
+ }
+
+ clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state);
+
+ /* enable queue */
+ txdctl |= IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl);
+
+ /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */
+ if (hw->mac.type == ixgbe_mac_82598EB &&
+ !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+ return;
+
+ /* poll to verify queue is enabled */
+ do {
+ usleep_range(1000, 2000);
+ txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
+ } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
+ if (!wait_loop)
+ e_err(drv, "Could not enable Tx Queue %d\n", reg_idx);
+}
+
+static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 rttdcs;
+ u32 reg;
+ u8 tcs = netdev_get_num_tc(adapter->netdev);
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ /* disable the arbiter while setting MTQC */
+ rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ rttdcs |= IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
+ /* set transmit pool layout */
+ switch (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ case (IXGBE_FLAG_SRIOV_ENABLED):
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC,
+ (IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF));
+ break;
+ default:
+ if (!tcs)
+ reg = IXGBE_MTQC_64Q_1PB;
+ else if (tcs <= 4)
+ reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
+ else
+ reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
+
+ /* Enable Security TX Buffer IFG for multiple pb */
+ if (tcs) {
+ reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
+ reg |= IXGBE_SECTX_DCB;
+ IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
+ }
+ break;
+ }
+
+ /* re-enable the arbiter */
+ rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+}
+
+/**
+ * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 dmatxctl;
+ u32 i;
+
+ ixgbe_setup_mtqc(adapter);
+
+ if (hw->mac.type != ixgbe_mac_82598EB) {
+ /* DMATXCTL.EN must be before Tx queues are enabled */
+ dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
+ dmatxctl |= IXGBE_DMATXCTL_TE;
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
+ }
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]);
+}
+
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
+
+static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *rx_ring)
+{
+ u32 srrctl;
+ u8 reg_idx = rx_ring->reg_idx;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82598EB: {
+ struct ixgbe_ring_feature *feature = adapter->ring_feature;
+ const int mask = feature[RING_F_RSS].mask;
+ reg_idx = reg_idx & mask;
+ }
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ default:
+ break;
+ }
+
+ srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx));
+
+ srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
+ srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
+ if (adapter->num_vfs)
+ srrctl |= IXGBE_SRRCTL_DROP_EN;
+
+ srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+ IXGBE_SRRCTL_BSIZEHDR_MASK;
+
+ if (ring_is_ps_enabled(rx_ring)) {
+#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
+ srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#else
+ srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+#endif
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ } else {
+ srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >>
+ IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+ }
+
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx), srrctl);
+}
+
+static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D,
+ 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE,
+ 0x6A3E67EA, 0x14364D17, 0x3BED200D};
+ u32 mrqc = 0, reta = 0;
+ u32 rxcsum;
+ int i, j;
+ u8 tcs = netdev_get_num_tc(adapter->netdev);
+ int maxq = adapter->ring_feature[RING_F_RSS].indices;
+
+ if (tcs)
+ maxq = min(maxq, adapter->num_tx_queues / tcs);
+
+ /* Fill out hash function seeds */
+ for (i = 0; i < 10; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]);
+
+ /* Fill out redirection table */
+ for (i = 0, j = 0; i < 128; i++, j++) {
+ if (j == maxq)
+ j = 0;
+ /* reta = 4-byte sliding window of
+ * 0x00..(indices-1)(indices-1)00..etc. */
+ reta = (reta << 8) | (j * 0x11);
+ if ((i & 3) == 3)
+ IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
+ }
+
+ /* Disable indicating checksum in descriptor, enables RSS hash */
+ rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
+ rxcsum |= IXGBE_RXCSUM_PCSD;
+ IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
+
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB &&
+ (adapter->flags & IXGBE_FLAG_RSS_ENABLED)) {
+ mrqc = IXGBE_MRQC_RSSEN;
+ } else {
+ int mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED
+ | IXGBE_FLAG_SRIOV_ENABLED);
+
+ switch (mask) {
+ case (IXGBE_FLAG_RSS_ENABLED):
+ if (!tcs)
+ mrqc = IXGBE_MRQC_RSSEN;
+ else if (tcs <= 4)
+ mrqc = IXGBE_MRQC_RTRSS4TCEN;
+ else
+ mrqc = IXGBE_MRQC_RTRSS8TCEN;
+ break;
+ case (IXGBE_FLAG_SRIOV_ENABLED):
+ mrqc = IXGBE_MRQC_VMDQEN;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /* Perform hash on these packet types */
+ mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4
+ | IXGBE_MRQC_RSS_FIELD_IPV4_TCP
+ | IXGBE_MRQC_RSS_FIELD_IPV6
+ | IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
+}
+
+/**
+ * ixgbe_configure_rscctl - enable RSC for the indicated ring
+ * @adapter: address of board private structure
+ * @index: index of ring to set
+ **/
+static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 rscctrl;
+ int rx_buf_len;
+ u8 reg_idx = ring->reg_idx;
+
+ if (!ring_is_rsc_enabled(ring))
+ return;
+
+ rx_buf_len = ring->rx_buf_len;
+ rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx));
+ rscctrl |= IXGBE_RSCCTL_RSCEN;
+ /*
+ * we must limit the number of descriptors so that the
+ * total size of max desc * buf_len is not greater
+ * than 65535
+ */
+ if (ring_is_ps_enabled(ring)) {
+#if (MAX_SKB_FRAGS > 16)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+#elif (MAX_SKB_FRAGS > 8)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+#elif (MAX_SKB_FRAGS > 4)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+#else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
+#endif
+ } else {
+ if (rx_buf_len < IXGBE_RXBUFFER_4096)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
+ else if (rx_buf_len < IXGBE_RXBUFFER_8192)
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
+ else
+ rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl);
+}
+
+/**
+ * ixgbe_set_uta - Set unicast filter table address
+ * @adapter: board private structure
+ *
+ * The unicast table address is a register array of 32-bit registers.
+ * The table is meant to be used in a way similar to how the MTA is used
+ * however due to certain limitations in the hardware it is necessary to
+ * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
+ * enable bit to allow vlan tag stripping when promiscuous mode is enabled
+ **/
+static void ixgbe_set_uta(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+
+ /* The UTA table only exists on 82599 hardware and newer */
+ if (hw->mac.type < ixgbe_mac_82599EB)
+ return;
+
+ /* we only need to do this if VMDq is enabled */
+ if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+ return;
+
+ for (i = 0; i < 128; i++)
+ IXGBE_WRITE_REG(hw, IXGBE_UTA(i), ~0);
+}
+
+#define IXGBE_MAX_RX_DESC_POLL 10
+static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int wait_loop = IXGBE_MAX_RX_DESC_POLL;
+ u32 rxdctl;
+ u8 reg_idx = ring->reg_idx;
+
+ /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */
+ if (hw->mac.type == ixgbe_mac_82598EB &&
+ !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+ return;
+
+ do {
+ usleep_range(1000, 2000);
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+ } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
+
+ if (!wait_loop) {
+ e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
+ "the polling period\n", reg_idx);
+ }
+}
+
+void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int wait_loop = IXGBE_MAX_RX_DESC_POLL;
+ u32 rxdctl;
+ u8 reg_idx = ring->reg_idx;
+
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+ rxdctl &= ~IXGBE_RXDCTL_ENABLE;
+
+ /* write value back with RXDCTL.ENABLE bit cleared */
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
+
+ if (hw->mac.type == ixgbe_mac_82598EB &&
+ !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
+ return;
+
+ /* the hardware may take up to 100us to really disable the rx queue */
+ do {
+ udelay(10);
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+ } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE));
+
+ if (!wait_loop) {
+ e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
+ "the polling period\n", reg_idx);
+ }
+}
+
+void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *ring)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u64 rdba = ring->dma;
+ u32 rxdctl;
+ u8 reg_idx = ring->reg_idx;
+
+ /* disable queue to avoid issues while updating state */
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
+ ixgbe_disable_rx_queue(adapter, ring);
+
+ IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
+ IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx),
+ ring->count * sizeof(union ixgbe_adv_rx_desc));
+ IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0);
+ ring->tail = hw->hw_addr + IXGBE_RDT(reg_idx);
+
+ ixgbe_configure_srrctl(adapter, ring);
+ ixgbe_configure_rscctl(adapter, ring);
+
+ /* If operating in IOV mode set RLPML for X540 */
+ if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) &&
+ hw->mac.type == ixgbe_mac_X540) {
+ rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
+ rxdctl |= ((ring->netdev->mtu + ETH_HLEN +
+ ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN);
+ }
+
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ /*
+ * enable cache line friendly hardware writes:
+ * PTHRESH=32 descriptors (half the internal cache),
+ * this also removes ugly rx_no_buffer_count increment
+ * HTHRESH=4 descriptors (to minimize latency on fetch)
+ * WTHRESH=8 burst writeback up to two cache lines
+ */
+ rxdctl &= ~0x3FFFFF;
+ rxdctl |= 0x080420;
+ }
+
+ /* enable receive descriptor ring */
+ rxdctl |= IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
+
+ ixgbe_rx_desc_queue_enable(adapter, ring);
+ ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring));
+}
+
+static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int p;
+
+ /* PSRTYPE must be initialized in non 82598 adapters */
+ u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
+ IXGBE_PSRTYPE_UDPHDR |
+ IXGBE_PSRTYPE_IPV4HDR |
+ IXGBE_PSRTYPE_L2HDR |
+ IXGBE_PSRTYPE_IPV6HDR;
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED)
+ psrtype |= (adapter->num_rx_queues_per_pool << 29);
+
+ for (p = 0; p < adapter->num_rx_pools; p++)
+ IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(adapter->num_vfs + p),
+ psrtype);
+}
+
+static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 gcr_ext;
+ u32 vt_reg_bits;
+ u32 reg_offset, vf_shift;
+ u32 vmdctl;
+
+ if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
+ return;
+
+ vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
+ vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN | IXGBE_VT_CTL_REPLEN;
+ vt_reg_bits |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT);
+ IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
+
+ vf_shift = adapter->num_vfs % 32;
+ reg_offset = (adapter->num_vfs > 32) ? 1 : 0;
+
+ /* Enable only the PF's pool for Tx/Rx */
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+
+ /* Map PF MAC address in RAR Entry 0 to first pool following VFs */
+ hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs);
+
+ /*
+ * Set up VF register offsets for selected VT Mode,
+ * i.e. 32 or 64 VFs for SR-IOV
+ */
+ gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
+ gcr_ext |= IXGBE_GCR_EXT_MSIX_EN;
+ gcr_ext |= IXGBE_GCR_EXT_VT_MODE_64;
+ IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
+
+ /* enable Tx loopback for VF/PF communication */
+ IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
+ /* Enable MAC Anti-Spoofing */
+ hw->mac.ops.set_mac_anti_spoofing(hw,
+ (adapter->antispoofing_enabled =
+ (adapter->num_vfs != 0)),
+ adapter->num_vfs);
+}
+
+static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ int rx_buf_len;
+ struct ixgbe_ring *rx_ring;
+ int i;
+ u32 mhadd, hlreg0;
+
+ /* Decide whether to use packet split mode or not */
+ /* On by default */
+ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+
+ /* Do not use packet split if we're in SR-IOV Mode */
+ if (adapter->num_vfs)
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+
+ /* Disable packet split due to 82599 erratum #45 */
+ if (hw->mac.type == ixgbe_mac_82599EB)
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+
+ /* Set the RX buffer length according to the mode */
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ rx_buf_len = IXGBE_RX_HDR_SIZE;
+ } else {
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
+ (netdev->mtu <= ETH_DATA_LEN))
+ rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ else
+ rx_buf_len = ALIGN(max_frame + VLAN_HLEN, 1024);
+ }
+
+#ifdef IXGBE_FCOE
+ /* adjust max frame to be able to do baby jumbo for FCoE */
+ if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
+ (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
+ max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
+
+#endif /* IXGBE_FCOE */
+ mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
+ if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
+ mhadd &= ~IXGBE_MHADD_MFS_MASK;
+ mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
+ }
+
+ hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
+ /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */
+ hlreg0 |= IXGBE_HLREG0_JUMBOEN;
+ IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rx_ring = adapter->rx_ring[i];
+ rx_ring->rx_buf_len = rx_buf_len;
+
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
+ set_ring_ps_enabled(rx_ring);
+ else
+ clear_ring_ps_enabled(rx_ring);
+
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+ set_ring_rsc_enabled(rx_ring);
+ else
+ clear_ring_rsc_enabled(rx_ring);
+
+#ifdef IXGBE_FCOE
+ if (netdev->features & NETIF_F_FCOE_MTU) {
+ struct ixgbe_ring_feature *f;
+ f = &adapter->ring_feature[RING_F_FCOE];
+ if ((i >= f->mask) && (i < f->mask + f->indices)) {
+ clear_ring_ps_enabled(rx_ring);
+ if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
+ rx_ring->rx_buf_len =
+ IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ } else if (!ring_is_rsc_enabled(rx_ring) &&
+ !ring_is_ps_enabled(rx_ring)) {
+ rx_ring->rx_buf_len =
+ IXGBE_FCOE_JUMBO_FRAME_SIZE;
+ }
+ }
+#endif /* IXGBE_FCOE */
+ }
+}
+
+static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ /*
+ * For VMDq support of different descriptor types or
+ * buffer sizes through the use of multiple SRRCTL
+ * registers, RDRXCTL.MVMEN must be set to 1
+ *
+ * also, the manual doesn't mention it clearly but DCA hints
+ * will only use queue 0's tags unless this bit is set. Side
+ * effects of setting this bit are only that SRRCTL must be
+ * fully programmed [0..15]
+ */
+ rdrxctl |= IXGBE_RDRXCTL_MVMEN;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ /* Disable RSC for ACK packets */
+ IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
+ (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
+ rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
+ /* hardware requires some bits to be set by default */
+ rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX);
+ rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
+ break;
+ default:
+ /* We should do nothing since we don't know this hardware */
+ return;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
+}
+
+/**
+ * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+ u32 rxctrl;
+
+ /* disable receives while setting up the descriptors */
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
+
+ ixgbe_setup_psrtype(adapter);
+ ixgbe_setup_rdrxctl(adapter);
+
+ /* Program registers for the distribution of queues */
+ ixgbe_setup_mrqc(adapter);
+
+ ixgbe_set_uta(adapter);
+
+ /* set_rx_buffer_len must be called before ring initialization */
+ ixgbe_set_rx_buffer_len(adapter);
+
+ /*
+ * Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring
+ */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]);
+
+ /* disable drop enable for 82598 parts */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ rxctrl |= IXGBE_RXCTRL_DMBYPS;
+
+ /* enable all receives */
+ rxctrl |= IXGBE_RXCTRL_RXEN;
+ hw->mac.ops.enable_rx_dma(hw, rxctrl);
+}
+
+static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int pool_ndx = adapter->num_vfs;
+
+ /* add VID to filter table */
+ hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true);
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int pool_ndx = adapter->num_vfs;
+
+ /* remove VID from filter table */
+ hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false);
+ clear_bit(vid, adapter->active_vlans);
+}
+
+/**
+ * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl;
+
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+}
+
+/**
+ * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl;
+
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl |= IXGBE_VLNCTRL_VFE;
+ vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+}
+
+/**
+ * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl;
+ int i, j;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl &= ~IXGBE_VLNCTRL_VME;
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ j = adapter->rx_ring[i]->reg_idx;
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
+ vlnctrl &= ~IXGBE_RXDCTL_VME;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping
+ * @adapter: driver data
+ */
+static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl;
+ int i, j;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl |= IXGBE_VLNCTRL_VME;
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ j = adapter->rx_ring[i]->reg_idx;
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
+ vlnctrl |= IXGBE_RXDCTL_VME;
+ IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
+{
+ u16 vid;
+
+ ixgbe_vlan_rx_add_vid(adapter->netdev, 0);
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ ixgbe_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+/**
+ * ixgbe_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ * 0 on no addresses written
+ * X on writing X addresses to the RAR table
+ **/
+static int ixgbe_write_uc_addr_list(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ unsigned int vfn = adapter->num_vfs;
+ unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS;
+ int count = 0;
+
+ /* return ENOMEM indicating insufficient memory for addresses */
+ if (netdev_uc_count(netdev) > rar_entries)
+ return -ENOMEM;
+
+ if (!netdev_uc_empty(netdev) && rar_entries) {
+ struct netdev_hw_addr *ha;
+ /* return error if we do not support writing to RAR table */
+ if (!hw->mac.ops.set_rar)
+ return -ENOMEM;
+
+ netdev_for_each_uc_addr(ha, netdev) {
+ if (!rar_entries)
+ break;
+ hw->mac.ops.set_rar(hw, rar_entries--, ha->addr,
+ vfn, IXGBE_RAH_AV);
+ count++;
+ }
+ }
+ /* write the addresses in reverse order to avoid write combining */
+ for (; rar_entries > 0 ; rar_entries--)
+ hw->mac.ops.clear_rar(hw, rar_entries);
+
+ return count;
+}
+
+/**
+ * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_method entry point is called whenever the unicast/multicast
+ * address list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper unicast, multicast and
+ * promiscuous mode.
+ **/
+void ixgbe_set_rx_mode(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
+ int count;
+
+ /* Check for Promiscuous and All Multicast modes */
+
+ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+
+ /* set all bits that we expect to always be set */
+ fctrl |= IXGBE_FCTRL_BAM;
+ fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */
+ fctrl |= IXGBE_FCTRL_PMCF;
+
+ /* clear the bits we are changing the status of */
+ fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+
+ if (netdev->flags & IFF_PROMISC) {
+ hw->addr_ctrl.user_set_promisc = true;
+ fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+ vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE);
+ /* don't hardware filter vlans in promisc mode */
+ ixgbe_vlan_filter_disable(adapter);
+ } else {
+ if (netdev->flags & IFF_ALLMULTI) {
+ fctrl |= IXGBE_FCTRL_MPE;
+ vmolr |= IXGBE_VMOLR_MPE;
+ } else {
+ /*
+ * Write addresses to the MTA, if the attempt fails
+ * then we should just turn on promiscuous mode so
+ * that we can at least receive multicast traffic
+ */
+ hw->mac.ops.update_mc_addr_list(hw, netdev);
+ vmolr |= IXGBE_VMOLR_ROMPE;
+ }
+ ixgbe_vlan_filter_enable(adapter);
+ hw->addr_ctrl.user_set_promisc = false;
+ /*
+ * Write addresses to available RAR registers, if there is not
+ * sufficient space to store all the addresses then enable
+ * unicast promiscuous mode
+ */
+ count = ixgbe_write_uc_addr_list(netdev);
+ if (count < 0) {
+ fctrl |= IXGBE_FCTRL_UPE;
+ vmolr |= IXGBE_VMOLR_ROPE;
+ }
+ }
+
+ if (adapter->num_vfs) {
+ ixgbe_restore_vf_multicasts(adapter);
+ vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) &
+ ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE |
+ IXGBE_VMOLR_ROPE);
+ IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+
+ if (netdev->features & NETIF_F_HW_VLAN_RX)
+ ixgbe_vlan_strip_enable(adapter);
+ else
+ ixgbe_vlan_strip_disable(adapter);
+}
+
+static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbe_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* legacy and MSI only use one vector */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ q_vectors = 1;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ struct napi_struct *napi;
+ q_vector = adapter->q_vector[q_idx];
+ napi = &q_vector->napi;
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ if (!q_vector->rx.count || !q_vector->tx.count) {
+ if (q_vector->tx.count == 1)
+ napi->poll = &ixgbe_clean_txonly;
+ else if (q_vector->rx.count == 1)
+ napi->poll = &ixgbe_clean_rxonly;
+ }
+ }
+
+ napi_enable(napi);
+ }
+}
+
+static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbe_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* legacy and MSI only use one vector */
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
+ q_vectors = 1;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ q_vector = adapter->q_vector[q_idx];
+ napi_disable(&q_vector->napi);
+ }
+}
+
+#ifdef CONFIG_IXGBE_DCB
+/*
+ * ixgbe_configure_dcb - Configure DCB hardware
+ * @adapter: ixgbe adapter struct
+ *
+ * This is called by the driver on open to configure the DCB hardware.
+ * This is also called by the gennetlink interface when reconfiguring
+ * the DCB state.
+ */
+static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) {
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ netif_set_gso_max_size(adapter->netdev, 65536);
+ return;
+ }
+
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ netif_set_gso_max_size(adapter->netdev, 32768);
+
+
+ /* Enable VLAN tag insert/strip */
+ adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
+
+ hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
+
+ /* reconfigure the hardware */
+ if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
+#ifdef CONFIG_FCOE
+ if (adapter->netdev->features & NETIF_F_FCOE_MTU)
+ max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
+#endif
+ ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+ DCB_TX_CONFIG);
+ ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
+ DCB_RX_CONFIG);
+ ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
+ } else {
+ struct net_device *dev = adapter->netdev;
+
+ if (adapter->ixgbe_ieee_ets)
+ dev->dcbnl_ops->ieee_setets(dev,
+ adapter->ixgbe_ieee_ets);
+ if (adapter->ixgbe_ieee_pfc)
+ dev->dcbnl_ops->ieee_setpfc(dev,
+ adapter->ixgbe_ieee_pfc);
+ }
+
+ /* Enable RSS Hash per TC */
+ if (hw->mac.type != ixgbe_mac_82598EB) {
+ int i;
+ u32 reg = 0;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ u8 msb = 0;
+ u8 cnt = adapter->netdev->tc_to_txq[i].count;
+
+ while (cnt >>= 1)
+ msb++;
+
+ reg |= msb << IXGBE_RQTC_SHIFT_TC(i);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_RQTC, reg);
+ }
+}
+
+#endif
+
+static void ixgbe_configure_pb(struct ixgbe_adapter *adapter)
+{
+ int hdrm = 0;
+ int num_tc = netdev_get_num_tc(adapter->netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
+ adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
+ hdrm = 64 << adapter->fdir_pballoc;
+
+ hw->mac.ops.set_rxpba(&adapter->hw, num_tc, hdrm, PBA_STRATEGY_EQUAL);
+}
+
+static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct hlist_node *node, *node2;
+ struct ixgbe_fdir_filter *filter;
+
+ spin_lock(&adapter->fdir_perfect_lock);
+
+ if (!hlist_empty(&adapter->fdir_filter_list))
+ ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask);
+
+ hlist_for_each_entry_safe(filter, node, node2,
+ &adapter->fdir_filter_list, fdir_node) {
+ ixgbe_fdir_write_perfect_filter_82599(hw,
+ &filter->filter,
+ filter->sw_idx,
+ (filter->action == IXGBE_FDIR_DROP_QUEUE) ?
+ IXGBE_FDIR_DROP_QUEUE :
+ adapter->rx_ring[filter->action]->reg_idx);
+ }
+
+ spin_unlock(&adapter->fdir_perfect_lock);
+}
+
+static void ixgbe_configure(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+
+ ixgbe_configure_pb(adapter);
+#ifdef CONFIG_IXGBE_DCB
+ ixgbe_configure_dcb(adapter);
+#endif
+
+ ixgbe_set_rx_mode(netdev);
+ ixgbe_restore_vlan(adapter);
+
+#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ ixgbe_configure_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->atr_sample_rate =
+ adapter->atr_sample_rate;
+ ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
+ } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
+ ixgbe_init_fdir_perfect_82599(&adapter->hw,
+ adapter->fdir_pballoc);
+ ixgbe_fdir_filter_restore(adapter);
+ }
+ ixgbe_configure_virtualization(adapter);
+
+ ixgbe_configure_tx(adapter);
+ ixgbe_configure_rx(adapter);
+}
+
+static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
+{
+ switch (hw->phy.type) {
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_sfp_ftl_active:
+ return true;
+ default:
+ return false;
+ }
+}
+
+/**
+ * ixgbe_sfp_link_config - set up SFP+ link
+ * @adapter: pointer to private adapter struct
+ **/
+static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
+{
+ /*
+ * We are assuming the worst case scenerio here, and that
+ * is that an SFP was inserted/removed after the reset
+ * but before SFP detection was enabled. As such the best
+ * solution is to just start searching as soon as we start
+ */
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+ adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+}
+
+/**
+ * ixgbe_non_sfp_link_config - set up non-SFP+ link
+ * @hw: pointer to private hardware struct
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
+{
+ u32 autoneg;
+ bool negotiation, link_up = false;
+ u32 ret = IXGBE_ERR_LINK_SETUP;
+
+ if (hw->mac.ops.check_link)
+ ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
+
+ if (ret)
+ goto link_cfg_out;
+
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
+ ret = hw->mac.ops.get_link_capabilities(hw, &autoneg,
+ &negotiation);
+ if (ret)
+ goto link_cfg_out;
+
+ if (hw->mac.ops.setup_link)
+ ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up);
+link_cfg_out:
+ return ret;
+}
+
+static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 gpie = 0;
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
+ IXGBE_GPIE_OCD;
+ gpie |= IXGBE_GPIE_EIAME;
+ /*
+ * use EIAM to auto-mask when MSI-X interrupt is asserted
+ * this saves a register write for every interrupt
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ default:
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
+ break;
+ }
+ } else {
+ /* legacy interrupts, use EIAM to auto-mask when reading EICR,
+ * specifically only auto mask tx and rx interrupts */
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+ }
+
+ /* XXX: to interrupt immediately for EICS writes, enable this */
+ /* gpie |= IXGBE_GPIE_EIMEN; */
+
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ gpie &= ~IXGBE_GPIE_VTMODE_MASK;
+ gpie |= IXGBE_GPIE_VTMODE_64;
+ }
+
+ /* Enable fan failure interrupt */
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
+ gpie |= IXGBE_SDP1_GPIEN;
+
+ if (hw->mac.type == ixgbe_mac_82599EB) {
+ gpie |= IXGBE_SDP1_GPIEN;
+ gpie |= IXGBE_SDP2_GPIEN;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
+}
+
+static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int err;
+ u32 ctrl_ext;
+
+ ixgbe_get_hw_control(adapter);
+ ixgbe_setup_gpie(adapter);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+ ixgbe_configure_msix(adapter);
+ else
+ ixgbe_configure_msi_and_legacy(adapter);
+
+ /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */
+ if (hw->mac.ops.enable_tx_laser &&
+ ((hw->phy.multispeed_fiber) ||
+ ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ (hw->mac.type == ixgbe_mac_82599EB))))
+ hw->mac.ops.enable_tx_laser(hw);
+
+ clear_bit(__IXGBE_DOWN, &adapter->state);
+ ixgbe_napi_enable_all(adapter);
+
+ if (ixgbe_is_sfp(hw)) {
+ ixgbe_sfp_link_config(adapter);
+ } else {
+ err = ixgbe_non_sfp_link_config(hw);
+ if (err)
+ e_err(probe, "link_config FAILED %d\n", err);
+ }
+
+ /* clear any pending interrupts, may auto mask */
+ IXGBE_READ_REG(hw, IXGBE_EICR);
+ ixgbe_irq_enable(adapter, true, true);
+
+ /*
+ * If this adapter has a fan, check to see if we had a failure
+ * before we enabled the interrupt.
+ */
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ e_crit(drv, "Fan has stopped, replace the adapter\n");
+ }
+
+ /* enable transmits */
+ netif_tx_start_all_queues(adapter->netdev);
+
+ /* bring the link up in the watchdog, this could race with our first
+ * link up interrupt but shouldn't be a problem */
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ mod_timer(&adapter->service_timer, jiffies);
+
+ /* Set PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+ return 0;
+}
+
+void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
+{
+ WARN_ON(in_interrupt());
+ /* put off any impending NetWatchDogTimeout */
+ adapter->netdev->trans_start = jiffies;
+
+ while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
+ usleep_range(1000, 2000);
+ ixgbe_down(adapter);
+ /*
+ * If SR-IOV enabled then wait a bit before bringing the adapter
+ * back up to give the VFs time to respond to the reset. The
+ * two second wait is based upon the watchdog timer cycle in
+ * the VF driver.
+ */
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ msleep(2000);
+ ixgbe_up(adapter);
+ clear_bit(__IXGBE_RESETTING, &adapter->state);
+}
+
+int ixgbe_up(struct ixgbe_adapter *adapter)
+{
+ /* hardware has been reset, we need to reload some things */
+ ixgbe_configure(adapter);
+
+ return ixgbe_up_complete(adapter);
+}
+
+void ixgbe_reset(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int err;
+
+ /* lock SFP init bit to prevent race conditions with the watchdog */
+ while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ usleep_range(1000, 2000);
+
+ /* clear all SFP and link config related flags while holding SFP_INIT */
+ adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP |
+ IXGBE_FLAG2_SFP_NEEDS_RESET);
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+ err = hw->mac.ops.init_hw(hw);
+ switch (err) {
+ case 0:
+ case IXGBE_ERR_SFP_NOT_PRESENT:
+ case IXGBE_ERR_SFP_NOT_SUPPORTED:
+ break;
+ case IXGBE_ERR_MASTER_REQUESTS_PENDING:
+ e_dev_err("master disable timed out\n");
+ break;
+ case IXGBE_ERR_EEPROM_VERSION:
+ /* We are running on a pre-production device, log a warning */
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issuesassociated with "
+ "your hardware. If you are experiencing problems "
+ "please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
+ break;
+ default:
+ e_dev_err("Hardware Error: %d\n", err);
+ }
+
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
+ /* reprogram the RAR[0] in case user changed it. */
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+ IXGBE_RAH_AV);
+}
+
+/**
+ * ixgbe_clean_rx_ring - Free Rx Buffers per Queue
+ * @rx_ring: ring to free buffers from
+ **/
+static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ unsigned long size;
+ u16 i;
+
+ /* ring already cleared, nothing to do */
+ if (!rx_ring->rx_buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ struct ixgbe_rx_buffer *rx_buffer_info;
+
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+ if (rx_buffer_info->dma) {
+ dma_unmap_single(rx_ring->dev, rx_buffer_info->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ rx_buffer_info->dma = 0;
+ }
+ if (rx_buffer_info->skb) {
+ struct sk_buff *skb = rx_buffer_info->skb;
+ rx_buffer_info->skb = NULL;
+ do {
+ struct sk_buff *this = skb;
+ if (IXGBE_RSC_CB(this)->delay_unmap) {
+ dma_unmap_single(dev,
+ IXGBE_RSC_CB(this)->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ IXGBE_RSC_CB(this)->dma = 0;
+ IXGBE_RSC_CB(skb)->delay_unmap = false;
+ }
+ skb = skb->prev;
+ dev_kfree_skb(this);
+ } while (skb);
+ }
+ if (!rx_buffer_info->page)
+ continue;
+ if (rx_buffer_info->page_dma) {
+ dma_unmap_page(dev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, DMA_FROM_DEVICE);
+ rx_buffer_info->page_dma = 0;
+ }
+ put_page(rx_buffer_info->page);
+ rx_buffer_info->page = NULL;
+ rx_buffer_info->page_offset = 0;
+ }
+
+ size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+}
+
+/**
+ * ixgbe_clean_tx_ring - Free Tx Buffers
+ * @tx_ring: ring to be cleaned
+ **/
+static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring)
+{
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ unsigned long size;
+ u16 i;
+
+ /* ring already cleared, nothing to do */
+ if (!tx_ring->tx_buffer_info)
+ return;
+
+ /* Free all the Tx ring sk_buffs */
+ for (i = 0; i < tx_ring->count; i++) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+ }
+
+ size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+}
+
+/**
+ * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbe_clean_rx_ring(adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ ixgbe_clean_tx_ring(adapter->tx_ring[i]);
+}
+
+static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter)
+{
+ struct hlist_node *node, *node2;
+ struct ixgbe_fdir_filter *filter;
+
+ spin_lock(&adapter->fdir_perfect_lock);
+
+ hlist_for_each_entry_safe(filter, node, node2,
+ &adapter->fdir_filter_list, fdir_node) {
+ hlist_del(&filter->fdir_node);
+ kfree(filter);
+ }
+ adapter->fdir_filter_count = 0;
+
+ spin_unlock(&adapter->fdir_perfect_lock);
+}
+
+void ixgbe_down(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 rxctrl;
+ int i;
+ int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /* signal that we are down to the interrupt handler */
+ set_bit(__IXGBE_DOWN, &adapter->state);
+
+ /* disable receives */
+ rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
+
+ /* disable all enabled rx queues */
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ /* this call also flushes the previous write */
+ ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
+
+ usleep_range(10000, 20000);
+
+ netif_tx_stop_all_queues(netdev);
+
+ /* call carrier off first to avoid false dev_watchdog timeouts */
+ netif_carrier_off(netdev);
+ netif_tx_disable(netdev);
+
+ ixgbe_irq_disable(adapter);
+
+ ixgbe_napi_disable_all(adapter);
+
+ adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT |
+ IXGBE_FLAG2_RESET_REQUESTED);
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+
+ del_timer_sync(&adapter->service_timer);
+
+ /* disable receive for all VFs and wait one second */
+ if (adapter->num_vfs) {
+ /* ping all the active vfs to let them know we are going down */
+ ixgbe_ping_all_vfs(adapter);
+
+ /* Disable all VFTE/VFRE TX/RX */
+ ixgbe_disable_tx_rx(adapter);
+
+ /* Mark all the VFs as inactive */
+ for (i = 0 ; i < adapter->num_vfs; i++)
+ adapter->vfinfo[i].clear_to_send = 0;
+ }
+
+ /* Cleanup the affinity_hint CPU mask memory and callback */
+ for (i = 0; i < num_q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ /* clear the affinity_mask in the IRQ descriptor */
+ irq_set_affinity_hint(adapter->msix_entries[i]. vector, NULL);
+ /* release the CPU mask memory */
+ free_cpumask_var(q_vector->affinity_mask);
+ }
+
+ /* disable transmits in the hardware now that interrupts are off */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ u8 reg_idx = adapter->tx_ring[i]->reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH);
+ }
+
+ /* Disable the Tx DMA engine on 82599 and X540 */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL,
+ (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
+ ~IXGBE_DMATXCTL_TE));
+ break;
+ default:
+ break;
+ }
+
+ if (!pci_channel_offline(adapter->pdev))
+ ixgbe_reset(adapter);
+
+ /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+ if (hw->mac.ops.disable_tx_laser &&
+ ((hw->phy.multispeed_fiber) ||
+ ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ (hw->mac.type == ixgbe_mac_82599EB))))
+ hw->mac.ops.disable_tx_laser(hw);
+
+ ixgbe_clean_all_tx_rings(adapter);
+ ixgbe_clean_all_rx_rings(adapter);
+
+#ifdef CONFIG_IXGBE_DCA
+ /* since we reset the hardware DCA settings were cleared */
+ ixgbe_setup_dca(adapter);
+#endif
+}
+
+/**
+ * ixgbe_poll - NAPI Rx polling callback
+ * @napi: structure for representing this polling device
+ * @budget: how many packets driver is allowed to clean
+ *
+ * This function is used for legacy and MSI, NAPI mode
+ **/
+static int ixgbe_poll(struct napi_struct *napi, int budget)
+{
+ struct ixgbe_q_vector *q_vector =
+ container_of(napi, struct ixgbe_q_vector, napi);
+ struct ixgbe_adapter *adapter = q_vector->adapter;
+ int tx_clean_complete, work_done = 0;
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
+ ixgbe_update_dca(q_vector);
+#endif
+
+ tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring[0]);
+ ixgbe_clean_rx_irq(q_vector, adapter->rx_ring[0], &work_done, budget);
+
+ if (!tx_clean_complete)
+ work_done = budget;
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->rx_itr_setting & 1)
+ ixgbe_set_itr(q_vector);
+ if (!test_bit(__IXGBE_DOWN, &adapter->state))
+ ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
+ }
+ return work_done;
+}
+
+/**
+ * ixgbe_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void ixgbe_tx_timeout(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ ixgbe_tx_timeout_reset(adapter);
+}
+
+/**
+ * ixgbe_set_rss_queues: Allocate queues for RSS
+ * @adapter: board private structure to initialize
+ *
+ * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try
+ * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
+ *
+ **/
+static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
+{
+ bool ret = false;
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS];
+
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ f->mask = 0xF;
+ adapter->num_rx_queues = f->indices;
+ adapter->num_tx_queues = f->indices;
+ ret = true;
+ } else {
+ ret = false;
+ }
+
+ return ret;
+}
+
+/**
+ * ixgbe_set_fdir_queues: Allocate queues for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Flow Director is an advanced Rx filter, attempting to get Rx flows back
+ * to the original CPU that initiated the Tx session. This runs in addition
+ * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
+ * Rx load across CPUs using RSS.
+ *
+ **/
+static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
+{
+ bool ret = false;
+ struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR];
+
+ f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
+ f_fdir->mask = 0;
+
+ /* Flow Director must have RSS enabled */
+ if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
+ (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) {
+ adapter->num_tx_queues = f_fdir->indices;
+ adapter->num_rx_queues = f_fdir->indices;
+ ret = true;
+ } else {
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ }
+ return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
+ * @adapter: board private structure to initialize
+ *
+ * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
+ * The ring feature mask is not used as a mask for FCoE, as it can take any 8
+ * rx queues out of the max number of rx queues, instead, it is used as the
+ * index of the first rx queue used by FCoE.
+ *
+ **/
+static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+ return false;
+
+ f->indices = min((int)num_online_cpus(), f->indices);
+
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ e_info(probe, "FCoE enabled with RSS\n");
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+ ixgbe_set_fdir_queues(adapter);
+ else
+ ixgbe_set_rss_queues(adapter);
+ }
+
+ /* adding FCoE rx rings to the end */
+ f->mask = adapter->num_rx_queues;
+ adapter->num_rx_queues += f->indices;
+ adapter->num_tx_queues += f->indices;
+
+ return true;
+}
+#endif /* IXGBE_FCOE */
+
+/* Artificial max queue cap per traffic class in DCB mode */
+#define DCB_QUEUE_CAP 8
+
+#ifdef CONFIG_IXGBE_DCB
+static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
+{
+ int per_tc_q, q, i, offset = 0;
+ struct net_device *dev = adapter->netdev;
+ int tcs = netdev_get_num_tc(dev);
+
+ if (!tcs)
+ return false;
+
+ /* Map queue offset and counts onto allocated tx queues */
+ per_tc_q = min(dev->num_tx_queues / tcs, (unsigned int)DCB_QUEUE_CAP);
+ q = min((int)num_online_cpus(), per_tc_q);
+
+ for (i = 0; i < tcs; i++) {
+ netdev_set_prio_tc_map(dev, i, i);
+ netdev_set_tc_queue(dev, i, q, offset);
+ offset += q;
+ }
+
+ adapter->num_tx_queues = q * tcs;
+ adapter->num_rx_queues = q * tcs;
+
+#ifdef IXGBE_FCOE
+ /* FCoE enabled queues require special configuration indexed
+ * by feature specific indices and mask. Here we map FCoE
+ * indices onto the DCB queue pairs allowing FCoE to own
+ * configuration later.
+ */
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+ int tc;
+ struct ixgbe_ring_feature *f =
+ &adapter->ring_feature[RING_F_FCOE];
+
+ tc = netdev_get_prio_tc_map(dev, adapter->fcoe.up);
+ f->indices = dev->tc_to_txq[tc].count;
+ f->mask = dev->tc_to_txq[tc].offset;
+ }
+#endif
+
+ return true;
+}
+#endif
+
+/**
+ * ixgbe_set_sriov_queues: Allocate queues for IOV use
+ * @adapter: board private structure to initialize
+ *
+ * IOV doesn't actually use anything, so just NAK the
+ * request for now and let the other queue routines
+ * figure out what to do.
+ */
+static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
+{
+ return false;
+}
+
+/*
+ * ixgbe_set_num_queues: Allocate queues for device, feature dependent
+ * @adapter: board private structure to initialize
+ *
+ * This is the top level queue allocation routine. The order here is very
+ * important, starting with the "most" number of features turned on at once,
+ * and ending with the smallest set of features. This way large combinations
+ * can be allocated if they're turned on, and smaller combinations are the
+ * fallthrough conditions.
+ *
+ **/
+static int ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
+{
+ /* Start with base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_pools = adapter->num_rx_queues;
+ adapter->num_rx_queues_per_pool = 1;
+
+ if (ixgbe_set_sriov_queues(adapter))
+ goto done;
+
+#ifdef CONFIG_IXGBE_DCB
+ if (ixgbe_set_dcb_queues(adapter))
+ goto done;
+
+#endif
+#ifdef IXGBE_FCOE
+ if (ixgbe_set_fcoe_queues(adapter))
+ goto done;
+
+#endif /* IXGBE_FCOE */
+ if (ixgbe_set_fdir_queues(adapter))
+ goto done;
+
+ if (ixgbe_set_rss_queues(adapter))
+ goto done;
+
+ /* fallback to base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+
+done:
+ /* Notify the stack of the (possibly) reduced queue counts. */
+ netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
+ return netif_set_real_num_rx_queues(adapter->netdev,
+ adapter->num_rx_queues);
+}
+
+static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
+ int vectors)
+{
+ int err, vector_threshold;
+
+ /* We'll want at least 3 (vector_threshold):
+ * 1) TxQ[0] Cleanup
+ * 2) RxQ[0] Cleanup
+ * 3) Other (Link Status Change, etc.)
+ * 4) TCP Timer (optional)
+ */
+ vector_threshold = MIN_MSIX_COUNT;
+
+ /* The more we get, the more we will assign to Tx/Rx Cleanup
+ * for the separate queues...where Rx Cleanup >= Tx Cleanup.
+ * Right now, we simply care about how many we'll get; we'll
+ * set them up later while requesting irq's.
+ */
+ while (vectors >= vector_threshold) {
+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+ vectors);
+ if (!err) /* Success in acquiring all requested vectors. */
+ break;
+ else if (err < 0)
+ vectors = 0; /* Nasty failure, quit now */
+ else /* err == number of vectors we should try again with */
+ vectors = err;
+ }
+
+ if (vectors < vector_threshold) {
+ /* Can't allocate enough MSI-X interrupts? Oh well.
+ * This just means we'll go with either a single MSI
+ * vector or fall back to legacy interrupts.
+ */
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI-X interrupts\n");
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else {
+ adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
+ /*
+ * Adjust for only the vectors we'll use, which is minimum
+ * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+ * vectors we were allocated.
+ */
+ adapter->num_msix_vectors = min(vectors,
+ adapter->max_msix_q_vectors + NON_Q_VECTORS);
+ }
+}
+
+/**
+ * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for RSS to the assigned rings.
+ *
+ **/
+static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+ return false;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = i;
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->reg_idx = i;
+
+ return true;
+}
+
+#ifdef CONFIG_IXGBE_DCB
+
+/* ixgbe_get_first_reg_idx - Return first register index associated with ring */
+static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
+ unsigned int *tx, unsigned int *rx)
+{
+ struct net_device *dev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u8 num_tcs = netdev_get_num_tc(dev);
+
+ *tx = 0;
+ *rx = 0;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ *tx = tc << 2;
+ *rx = tc << 3;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ if (num_tcs == 8) {
+ if (tc < 3) {
+ *tx = tc << 5;
+ *rx = tc << 4;
+ } else if (tc < 5) {
+ *tx = ((tc + 2) << 4);
+ *rx = tc << 4;
+ } else if (tc < num_tcs) {
+ *tx = ((tc + 8) << 3);
+ *rx = tc << 4;
+ }
+ } else if (num_tcs == 4) {
+ *rx = tc << 5;
+ switch (tc) {
+ case 0:
+ *tx = 0;
+ break;
+ case 1:
+ *tx = 64;
+ break;
+ case 2:
+ *tx = 96;
+ break;
+ case 3:
+ *tx = 112;
+ break;
+ default:
+ break;
+ }
+ }
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for DCB to the assigned rings.
+ *
+ **/
+static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
+{
+ struct net_device *dev = adapter->netdev;
+ int i, j, k;
+ u8 num_tcs = netdev_get_num_tc(dev);
+
+ if (!num_tcs)
+ return false;
+
+ for (i = 0, k = 0; i < num_tcs; i++) {
+ unsigned int tx_s, rx_s;
+ u16 count = dev->tc_to_txq[i].count;
+
+ ixgbe_get_first_reg_idx(adapter, i, &tx_s, &rx_s);
+ for (j = 0; j < count; j++, k++) {
+ adapter->tx_ring[k]->reg_idx = tx_s + j;
+ adapter->rx_ring[k]->reg_idx = rx_s + j;
+ adapter->tx_ring[k]->dcb_tc = i;
+ adapter->rx_ring[k]->dcb_tc = i;
+ }
+ }
+
+ return true;
+}
+#endif
+
+/**
+ * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for Flow Director to the assigned rings.
+ *
+ **/
+static inline bool ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
+{
+ int i;
+ bool ret = false;
+
+ if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
+ (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) {
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i]->reg_idx = i;
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i]->reg_idx = i;
+ ret = true;
+ }
+
+ return ret;
+}
+
+#ifdef IXGBE_FCOE
+/**
+ * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
+ * @adapter: board private structure to initialize
+ *
+ * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
+ *
+ */
+static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
+ int i;
+ u8 fcoe_rx_i = 0, fcoe_tx_i = 0;
+
+ if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
+ return false;
+
+ if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
+ ixgbe_cache_ring_fdir(adapter);
+ else
+ ixgbe_cache_ring_rss(adapter);
+
+ fcoe_rx_i = f->mask;
+ fcoe_tx_i = f->mask;
+ }
+ for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
+ adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
+ adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
+ }
+ return true;
+}
+
+#endif /* IXGBE_FCOE */
+/**
+ * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
+ * @adapter: board private structure to initialize
+ *
+ * SR-IOV doesn't use any descriptor rings but changes the default if
+ * no other mapping is used.
+ *
+ */
+static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
+{
+ adapter->rx_ring[0]->reg_idx = adapter->num_vfs * 2;
+ adapter->tx_ring[0]->reg_idx = adapter->num_vfs * 2;
+ if (adapter->num_vfs)
+ return true;
+ else
+ return false;
+}
+
+/**
+ * ixgbe_cache_ring_register - Descriptor ring to register mapping
+ * @adapter: board private structure to initialize
+ *
+ * Once we know the feature-set enabled for the device, we'll cache
+ * the register offset the descriptor ring is assigned to.
+ *
+ * Note, the order the various feature calls is important. It must start with
+ * the "most" features enabled at the same time, then trickle down to the
+ * least amount of features turned on at once.
+ **/
+static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
+{
+ /* start with default case */
+ adapter->rx_ring[0]->reg_idx = 0;
+ adapter->tx_ring[0]->reg_idx = 0;
+
+ if (ixgbe_cache_ring_sriov(adapter))
+ return;
+
+#ifdef CONFIG_IXGBE_DCB
+ if (ixgbe_cache_ring_dcb(adapter))
+ return;
+#endif
+
+#ifdef IXGBE_FCOE
+ if (ixgbe_cache_ring_fcoe(adapter))
+ return;
+#endif /* IXGBE_FCOE */
+
+ if (ixgbe_cache_ring_fdir(adapter))
+ return;
+
+ if (ixgbe_cache_ring_rss(adapter))
+ return;
+}
+
+/**
+ * ixgbe_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time. The polling_netdev array is
+ * intended for Multiqueue, but should work fine with a single queue.
+ **/
+static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
+{
+ int rx = 0, tx = 0, nid = adapter->node;
+
+ if (nid < 0 || !node_online(nid))
+ nid = first_online_node;
+
+ for (; tx < adapter->num_tx_queues; tx++) {
+ struct ixgbe_ring *ring;
+
+ ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
+ if (!ring)
+ ring = kzalloc(sizeof(*ring), GFP_KERNEL);
+ if (!ring)
+ goto err_allocation;
+ ring->count = adapter->tx_ring_count;
+ ring->queue_index = tx;
+ ring->numa_node = nid;
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ adapter->tx_ring[tx] = ring;
+ }
+
+ for (; rx < adapter->num_rx_queues; rx++) {
+ struct ixgbe_ring *ring;
+
+ ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
+ if (!ring)
+ ring = kzalloc(sizeof(*ring), GFP_KERNEL);
+ if (!ring)
+ goto err_allocation;
+ ring->count = adapter->rx_ring_count;
+ ring->queue_index = rx;
+ ring->numa_node = nid;
+ ring->dev = &adapter->pdev->dev;
+ ring->netdev = adapter->netdev;
+
+ adapter->rx_ring[rx] = ring;
+ }
+
+ ixgbe_cache_ring_register(adapter);
+
+ return 0;
+
+err_allocation:
+ while (tx)
+ kfree(adapter->tx_ring[--tx]);
+
+ while (rx)
+ kfree(adapter->rx_ring[--rx]);
+ return -ENOMEM;
+}
+
+/**
+ * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int err = 0;
+ int vector, v_budget;
+
+ /*
+ * It's easy to be greedy for MSI-X vectors, but it really
+ * doesn't do us much good if we have a lot more vectors
+ * than CPU's. So let's be conservative and only ask for
+ * (roughly) the same number of vectors as there are CPU's.
+ */
+ v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
+ (int)num_online_cpus()) + NON_Q_VECTORS;
+
+ /*
+ * At the same time, hardware can only support a maximum of
+ * hw.mac->max_msix_vectors vectors. With features
+ * such as RSS and VMDq, we can easily surpass the number of Rx and Tx
+ * descriptor queues supported by our device. Thus, we cap it off in
+ * those rare cases where the cpu count also exceeds our vector limit.
+ */
+ v_budget = min(v_budget, (int)hw->mac.max_msix_vectors);
+
+ /* A failure in MSI-X entry allocation isn't fatal, but it does
+ * mean we disable MSI-X capabilities of the adapter. */
+ adapter->msix_entries = kcalloc(v_budget,
+ sizeof(struct msix_entry), GFP_KERNEL);
+ if (adapter->msix_entries) {
+ for (vector = 0; vector < v_budget; vector++)
+ adapter->msix_entries[vector].entry = vector;
+
+ ixgbe_acquire_msix_vectors(adapter, v_budget);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+ goto out;
+ }
+
+ adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
+ adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+ e_err(probe,
+ "ATR is not supported while multiple "
+ "queues are disabled. Disabling Flow Director\n");
+ }
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->atr_sample_rate = 0;
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
+
+ err = ixgbe_set_num_queues(adapter);
+ if (err)
+ return err;
+
+ err = pci_enable_msi(adapter->pdev);
+ if (!err) {
+ adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
+ } else {
+ netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
+ "Unable to allocate MSI interrupt, "
+ "falling back to legacy. Error: %d\n", err);
+ /* reset err */
+ err = 0;
+ }
+
+out:
+ return err;
+}
+
+/**
+ * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
+{
+ int q_idx, num_q_vectors;
+ struct ixgbe_q_vector *q_vector;
+ int (*poll)(struct napi_struct *, int);
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ poll = &ixgbe_clean_rxtx_many;
+ } else {
+ num_q_vectors = 1;
+ poll = &ixgbe_poll;
+ }
+
+ for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+ q_vector = kzalloc_node(sizeof(struct ixgbe_q_vector),
+ GFP_KERNEL, adapter->node);
+ if (!q_vector)
+ q_vector = kzalloc(sizeof(struct ixgbe_q_vector),
+ GFP_KERNEL);
+ if (!q_vector)
+ goto err_out;
+ q_vector->adapter = adapter;
+ if (q_vector->tx.count && !q_vector->rx.count)
+ q_vector->eitr = adapter->tx_eitr_param;
+ else
+ q_vector->eitr = adapter->rx_eitr_param;
+ q_vector->v_idx = q_idx;
+ netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
+ adapter->q_vector[q_idx] = q_vector;
+ }
+
+ return 0;
+
+err_out:
+ while (q_idx) {
+ q_idx--;
+ q_vector = adapter->q_vector[q_idx];
+ netif_napi_del(&q_vector->napi);
+ kfree(q_vector);
+ adapter->q_vector[q_idx] = NULL;
+ }
+ return -ENOMEM;
+}
+
+/**
+ * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
+{
+ int q_idx, num_q_vectors;
+
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
+ num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ else
+ num_q_vectors = 1;
+
+ for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx];
+ adapter->q_vector[q_idx] = NULL;
+ netif_napi_del(&q_vector->napi);
+ kfree(q_vector);
+ }
+}
+
+static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
+{
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
+ pci_disable_msi(adapter->pdev);
+ }
+}
+
+/**
+ * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
+ * @adapter: board private structure to initialize
+ *
+ * We determine which interrupt scheme to use based on...
+ * - Kernel support (MSI, MSI-X)
+ * - which can be user-defined (via MODULE_PARAM)
+ * - Hardware queue count (num_*_queues)
+ * - defined by miscellaneous hardware support/features (RSS, etc.)
+ **/
+int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
+ int err;
+
+ /* Number of supported queues */
+ err = ixgbe_set_num_queues(adapter);
+ if (err)
+ return err;
+
+ err = ixgbe_set_interrupt_capability(adapter);
+ if (err) {
+ e_dev_err("Unable to setup interrupt capabilities\n");
+ goto err_set_interrupt;
+ }
+
+ err = ixgbe_alloc_q_vectors(adapter);
+ if (err) {
+ e_dev_err("Unable to allocate memory for queue vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ err = ixgbe_alloc_queues(adapter);
+ if (err) {
+ e_dev_err("Unable to allocate memory for queues\n");
+ goto err_alloc_queues;
+ }
+
+ e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
+ (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
+ adapter->num_rx_queues, adapter->num_tx_queues);
+
+ set_bit(__IXGBE_DOWN, &adapter->state);
+
+ return 0;
+
+err_alloc_queues:
+ ixgbe_free_q_vectors(adapter);
+err_alloc_q_vectors:
+ ixgbe_reset_interrupt_capability(adapter);
+err_set_interrupt:
+ return err;
+}
+
+/**
+ * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
+ * @adapter: board private structure to clear interrupt scheme on
+ *
+ * We go through and clear interrupt specific resources and reset the structure
+ * to pre-load conditions
+ **/
+void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ kfree(adapter->tx_ring[i]);
+ adapter->tx_ring[i] = NULL;
+ }
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct ixgbe_ring *ring = adapter->rx_ring[i];
+
+ /* ixgbe_get_stats64() might access this ring, we must wait
+ * a grace period before freeing it.
+ */
+ kfree_rcu(ring, rcu);
+ adapter->rx_ring[i] = NULL;
+ }
+
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+
+ ixgbe_free_q_vectors(adapter);
+ ixgbe_reset_interrupt_capability(adapter);
+}
+
+/**
+ * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgbe_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ struct net_device *dev = adapter->netdev;
+ unsigned int rss;
+#ifdef CONFIG_IXGBE_DCB
+ int j;
+ struct tc_configuration *tc;
+#endif
+ int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ /* Set capability flags */
+ rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
+ adapter->ring_feature[RING_F_RSS].indices = rss;
+ adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ if (hw->device_id == IXGBE_DEV_ID_82598AT)
+ adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
+ adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
+ adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
+ if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
+ adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
+ /* Flow Director hash filters enabled */
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->atr_sample_rate = 20;
+ adapter->ring_feature[RING_F_FDIR].indices =
+ IXGBE_MAX_FDIR_INDICES;
+ adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K;
+#ifdef IXGBE_FCOE
+ adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+ adapter->ring_feature[RING_F_FCOE].indices = 0;
+#ifdef CONFIG_IXGBE_DCB
+ /* Default traffic class to use for FCoE */
+ adapter->fcoe.up = IXGBE_FCOE_DEFTC;
+#endif
+#endif /* IXGBE_FCOE */
+ break;
+ default:
+ break;
+ }
+
+ /* n-tuple support exists, always init our spinlock */
+ spin_lock_init(&adapter->fdir_perfect_lock);
+
+#ifdef CONFIG_IXGBE_DCB
+ /* Configure DCB traffic classes */
+ for (j = 0; j < MAX_TRAFFIC_CLASS; j++) {
+ tc = &adapter->dcb_cfg.tc_config[j];
+ tc->path[DCB_TX_CONFIG].bwg_id = 0;
+ tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1);
+ tc->path[DCB_RX_CONFIG].bwg_id = 0;
+ tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1);
+ tc->dcb_pfc = pfc_disabled;
+ }
+ adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
+ adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
+ adapter->dcb_cfg.pfc_mode_enable = false;
+ adapter->dcb_set_bitmap = 0x00;
+ adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE;
+ ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg,
+ MAX_TRAFFIC_CLASS);
+
+#endif
+
+ /* default flow control settings */
+ hw->fc.requested_mode = ixgbe_fc_full;
+ hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */
+#ifdef CONFIG_DCB
+ adapter->last_lfc_mode = hw->fc.current_mode;
+#endif
+ hw->fc.high_water = FC_HIGH_WATER(max_frame);
+ hw->fc.low_water = FC_LOW_WATER(max_frame);
+ hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
+ hw->fc.send_xon = true;
+ hw->fc.disable_fc_autoneg = false;
+
+ /* enable itr by default in dynamic mode */
+ adapter->rx_itr_setting = 1;
+ adapter->rx_eitr_param = 20000;
+ adapter->tx_itr_setting = 1;
+ adapter->tx_eitr_param = 10000;
+
+ /* set defaults for eitr in MegaBytes */
+ adapter->eitr_low = 10;
+ adapter->eitr_high = 20;
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IXGBE_DEFAULT_TXD;
+ adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
+
+ /* set default work limits */
+ adapter->tx_work_limit = adapter->tx_ring_count;
+
+ /* initialize eeprom parameters */
+ if (ixgbe_init_eeprom_params_generic(hw)) {
+ e_dev_err("EEPROM initialization failed\n");
+ return -EIO;
+ }
+
+ /* enable rx csum by default */
+ adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+
+ /* get assigned NUMA node */
+ adapter->node = dev_to_node(&pdev->dev);
+
+ set_bit(__IXGBE_DOWN, &adapter->state);
+
+ return 0;
+}
+
+/**
+ * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring)
+{
+ struct device *dev = tx_ring->dev;
+ int size;
+
+ size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
+ tx_ring->tx_buffer_info = vzalloc_node(size, tx_ring->numa_node);
+ if (!tx_ring->tx_buffer_info)
+ tx_ring->tx_buffer_info = vzalloc(size);
+ if (!tx_ring->tx_buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ return 0;
+
+err:
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * ixgbe_setup_all_tx_resources - allocate all queues Tx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = ixgbe_setup_tx_resources(adapter->tx_ring[i]);
+ if (!err)
+ continue;
+ e_err(probe, "Allocation for Tx Queue %u failed\n", i);
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring)
+{
+ struct device *dev = rx_ring->dev;
+ int size;
+
+ size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
+ rx_ring->rx_buffer_info = vzalloc_node(size, rx_ring->numa_node);
+ if (!rx_ring->rx_buffer_info)
+ rx_ring->rx_buffer_info = vzalloc(size);
+ if (!rx_ring->rx_buffer_info)
+ goto err;
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+
+ if (!rx_ring->desc)
+ goto err;
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+err:
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+ dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * ixgbe_setup_all_rx_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = ixgbe_setup_rx_resources(adapter->rx_ring[i]);
+ if (!err)
+ continue;
+ e_err(probe, "Allocation for Rx Queue %u failed\n", i);
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ixgbe_free_tx_resources - Free Tx Resources per Queue
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring)
+{
+ ixgbe_clean_tx_ring(tx_ring);
+
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!tx_ring->desc)
+ return;
+
+ dma_free_coherent(tx_ring->dev, tx_ring->size,
+ tx_ring->desc, tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i]->desc)
+ ixgbe_free_tx_resources(adapter->tx_ring[i]);
+}
+
+/**
+ * ixgbe_free_rx_resources - Free Rx Resources
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring)
+{
+ ixgbe_clean_rx_ring(rx_ring);
+
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+
+ /* if not set, then don't free */
+ if (!rx_ring->desc)
+ return;
+
+ dma_free_coherent(rx_ring->dev, rx_ring->size,
+ rx_ring->desc, rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i]->desc)
+ ixgbe_free_rx_resources(adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbe_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ /* MTU < 68 is an error and causes problems on some kernels */
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED &&
+ hw->mac.type != ixgbe_mac_X540) {
+ if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE))
+ return -EINVAL;
+ } else {
+ if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
+ return -EINVAL;
+ }
+
+ e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
+ /* must set new MTU before calling down or up */
+ netdev->mtu = new_mtu;
+
+ hw->fc.high_water = FC_HIGH_WATER(max_frame);
+ hw->fc.low_water = FC_LOW_WATER(max_frame);
+
+ if (netif_running(netdev))
+ ixgbe_reinit_locked(adapter);
+
+ return 0;
+}
+
+/**
+ * ixgbe_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int ixgbe_open(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__IXGBE_TESTING, &adapter->state))
+ return -EBUSY;
+
+ netif_carrier_off(netdev);
+
+ /* allocate transmit descriptors */
+ err = ixgbe_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = ixgbe_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ ixgbe_configure(adapter);
+
+ err = ixgbe_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ err = ixgbe_up_complete(adapter);
+ if (err)
+ goto err_up;
+
+ netif_tx_start_all_queues(netdev);
+
+ return 0;
+
+err_up:
+ ixgbe_release_hw_control(adapter);
+ ixgbe_free_irq(adapter);
+err_req_irq:
+err_setup_rx:
+ ixgbe_free_all_rx_resources(adapter);
+err_setup_tx:
+ ixgbe_free_all_tx_resources(adapter);
+ ixgbe_reset(adapter);
+
+ return err;
+}
+
+/**
+ * ixgbe_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int ixgbe_close(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ ixgbe_down(adapter);
+ ixgbe_free_irq(adapter);
+
+ ixgbe_fdir_filter_exit(adapter);
+
+ ixgbe_free_all_tx_resources(adapter);
+ ixgbe_free_all_rx_resources(adapter);
+
+ ixgbe_release_hw_control(adapter);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixgbe_resume(struct pci_dev *pdev)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+ u32 err;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ /*
+ * pci_restore_state clears dev->state_saved so call
+ * pci_save_state to restore it.
+ */
+ pci_save_state(pdev);
+
+ err = pci_enable_device_mem(pdev);
+ if (err) {
+ e_dev_err("Cannot enable PCI device from suspend\n");
+ return err;
+ }
+ pci_set_master(pdev);
+
+ pci_wake_from_d3(pdev, false);
+
+ err = ixgbe_init_interrupt_scheme(adapter);
+ if (err) {
+ e_dev_err("Cannot initialize interrupts for device\n");
+ return err;
+ }
+
+ ixgbe_reset(adapter);
+
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
+ if (netif_running(netdev)) {
+ err = ixgbe_open(netdev);
+ if (err)
+ return err;
+ }
+
+ netif_device_attach(netdev);
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 ctrl, fctrl;
+ u32 wufc = adapter->wol;
+#ifdef CONFIG_PM
+ int retval = 0;
+#endif
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ ixgbe_down(adapter);
+ ixgbe_free_irq(adapter);
+ ixgbe_free_all_tx_resources(adapter);
+ ixgbe_free_all_rx_resources(adapter);
+ }
+
+ ixgbe_clear_interrupt_scheme(adapter);
+#ifdef CONFIG_DCB
+ kfree(adapter->ixgbe_ieee_pfc);
+ kfree(adapter->ixgbe_ieee_ets);
+#endif
+
+#ifdef CONFIG_PM
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+
+#endif
+ if (wufc) {
+ ixgbe_set_rx_mode(netdev);
+
+ /* turn on all-multi mode if wake on multicast is enabled */
+ if (wufc & IXGBE_WUFC_MC) {
+ fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ fctrl |= IXGBE_FCTRL_MPE;
+ IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
+ }
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ ctrl |= IXGBE_CTRL_GIO_DIS;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+
+ IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc);
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_WUC, 0);
+ IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
+ }
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ pci_wake_from_d3(pdev, false);
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ pci_wake_from_d3(pdev, !!wufc);
+ break;
+ default:
+ break;
+ }
+
+ *enable_wake = !!wufc;
+
+ ixgbe_release_hw_control(adapter);
+
+ pci_disable_device(pdev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __ixgbe_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+#endif /* CONFIG_PM */
+
+static void ixgbe_shutdown(struct pci_dev *pdev)
+{
+ bool wake;
+
+ __ixgbe_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+}
+
+/**
+ * ixgbe_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+void ixgbe_update_stats(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbe_hw_stats *hwstats = &adapter->stats;
+ u64 total_mpc = 0;
+ u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
+ u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
+ u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
+ u64 bytes = 0, packets = 0;
+
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
+ u64 rsc_count = 0;
+ u64 rsc_flush = 0;
+ for (i = 0; i < 16; i++)
+ adapter->hw_rx_no_dma_resources +=
+ IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count;
+ rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush;
+ }
+ adapter->rsc_total_count = rsc_count;
+ adapter->rsc_total_flush = rsc_flush;
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct ixgbe_ring *rx_ring = adapter->rx_ring[i];
+ non_eop_descs += rx_ring->rx_stats.non_eop_descs;
+ alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed;
+ alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed;
+ bytes += rx_ring->stats.bytes;
+ packets += rx_ring->stats.packets;
+ }
+ adapter->non_eop_descs = non_eop_descs;
+ adapter->alloc_rx_page_failed = alloc_rx_page_failed;
+ adapter->alloc_rx_buff_failed = alloc_rx_buff_failed;
+ netdev->stats.rx_bytes = bytes;
+ netdev->stats.rx_packets = packets;
+
+ bytes = 0;
+ packets = 0;
+ /* gather some stats to the adapter struct that are per queue */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+ restart_queue += tx_ring->tx_stats.restart_queue;
+ tx_busy += tx_ring->tx_stats.tx_busy;
+ bytes += tx_ring->stats.bytes;
+ packets += tx_ring->stats.packets;
+ }
+ adapter->restart_queue = restart_queue;
+ adapter->tx_busy = tx_busy;
+ netdev->stats.tx_bytes = bytes;
+ netdev->stats.tx_packets = packets;
+
+ hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+ for (i = 0; i < 8; i++) {
+ /* for packet buffers not used, the register should read 0 */
+ mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i));
+ missed_rx += mpc;
+ hwstats->mpc[i] += mpc;
+ total_mpc += hwstats->mpc[i];
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+ hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+ hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+ hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+ hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ hwstats->pxonrxc[i] +=
+ IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+ break;
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ hwstats->pxonrxc[i] +=
+ IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
+ break;
+ default:
+ break;
+ }
+ hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+ hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+ }
+ hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
+ /* work around hardware counting issue */
+ hwstats->gprc -= missed_rx;
+
+ ixgbe_update_xoff_received(adapter);
+
+ /* 82598 hardware only has a 32 bit counter in the high register */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+ hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
+ hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
+ hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
+ break;
+ case ixgbe_mac_X540:
+ /* OS2BMC stats are X540 only*/
+ hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC);
+ hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC);
+ hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC);
+ hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC);
+ case ixgbe_mac_82599EB:
+ hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
+ IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
+ hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
+ IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
+ hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL);
+ IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
+ hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
+ hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
+ hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
+#ifdef IXGBE_FCOE
+ hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
+ hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
+ hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
+ hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
+ hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
+ hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
+#endif /* IXGBE_FCOE */
+ break;
+ default:
+ break;
+ }
+ bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
+ hwstats->bprc += bprc;
+ hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ hwstats->mprc -= bprc;
+ hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC);
+ hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
+ hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
+ hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
+ hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
+ hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
+ hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
+ hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
+ lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+ hwstats->lxontxc += lxon;
+ lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+ hwstats->lxofftxc += lxoff;
+ hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
+ hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
+ hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
+ /*
+ * 82598 errata - tx of flow control packets is included in tx counters
+ */
+ xon_off_tot = lxon + lxoff;
+ hwstats->gptc -= xon_off_tot;
+ hwstats->mptc -= xon_off_tot;
+ hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN));
+ hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
+ hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
+ hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
+ hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
+ hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
+ hwstats->ptc64 -= xon_off_tot;
+ hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
+ hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
+ hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
+ hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
+ hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
+ hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
+
+ /* Fill out the OS statistics structure */
+ netdev->stats.multicast = hwstats->mprc;
+
+ /* Rx Errors */
+ netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec;
+ netdev->stats.rx_dropped = 0;
+ netdev->stats.rx_length_errors = hwstats->rlec;
+ netdev->stats.rx_crc_errors = hwstats->crcerrs;
+ netdev->stats.rx_missed_errors = total_mpc;
+}
+
+/**
+ * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+
+ if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
+
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
+ /* do nothing if we are not using signature filters */
+ if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE))
+ return;
+
+ adapter->fdir_overflow++;
+
+ if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ set_bit(__IXGBE_TX_FDIR_INIT_DONE,
+ &(adapter->tx_ring[i]->state));
+ /* re-enable flow director interrupts */
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
+ } else {
+ e_err(probe, "failed to finish FDIR re-initialization, "
+ "ignored adding FDIR ATR filters\n");
+ }
+}
+
+/**
+ * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
+ * @adapter - pointer to the device adapter structure
+ *
+ * This function serves two purposes. First it strobes the interrupt lines
+ * in order to make certain interrupts are occuring. Secondly it sets the
+ * bits needed to check for TX hangs. As a result we should immediately
+ * determine if a hang has occured.
+ */
+static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u64 eics = 0;
+ int i;
+
+ /* If we're down or resetting, just bail */
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
+ /* Force detection of hung controller */
+ if (netif_carrier_ok(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ set_check_for_tx_hang(adapter->tx_ring[i]);
+ }
+
+ if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+ /*
+ * for legacy and MSI interrupts don't set any bits
+ * that are enabled for EIAM, because this operation
+ * would set *both* EIMS and EICS for any bit in EIAM
+ */
+ IXGBE_WRITE_REG(hw, IXGBE_EICS,
+ (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
+ } else {
+ /* get one bit for every active tx/rx interrupt vector */
+ for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+ struct ixgbe_q_vector *qv = adapter->q_vector[i];
+ if (qv->rx.count || qv->tx.count)
+ eics |= ((u64)1 << i);
+ }
+ }
+
+ /* Cause software interrupt to ensure rings are cleaned */
+ ixgbe_irq_rearm_queues(adapter, eics);
+
+}
+
+/**
+ * ixgbe_watchdog_update_link - update the link status
+ * @adapter - pointer to the device adapter structure
+ * @link_speed - pointer to a u32 to store the link_speed
+ **/
+static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = adapter->link_speed;
+ bool link_up = adapter->link_up;
+ int i;
+
+ if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
+ return;
+
+ if (hw->mac.ops.check_link) {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ } else {
+ /* always assume link is up, if no check link function */
+ link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ link_up = true;
+ }
+ if (link_up) {
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
+ hw->mac.ops.fc_enable(hw, i);
+ } else {
+ hw->mac.ops.fc_enable(hw, 0);
+ }
+ }
+
+ if (link_up ||
+ time_after(jiffies, (adapter->link_check_timeout +
+ IXGBE_TRY_LINK_TIMEOUT))) {
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
+ IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
+ adapter->link_up = link_up;
+ adapter->link_speed = link_speed;
+}
+
+/**
+ * ixgbe_watchdog_link_is_up - update netif_carrier status and
+ * print link up message
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = adapter->link_speed;
+ bool flow_rx, flow_tx;
+
+ /* only continue if link was previously down */
+ if (netif_carrier_ok(netdev))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB: {
+ u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+ u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
+ flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
+ flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
+ }
+ break;
+ case ixgbe_mac_X540:
+ case ixgbe_mac_82599EB: {
+ u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
+ u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
+ flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
+ flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
+ }
+ break;
+ default:
+ flow_tx = false;
+ flow_rx = false;
+ break;
+ }
+ e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
+ (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
+ "10 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
+ "1 Gbps" :
+ (link_speed == IXGBE_LINK_SPEED_100_FULL ?
+ "100 Mbps" :
+ "unknown speed"))),
+ ((flow_rx && flow_tx) ? "RX/TX" :
+ (flow_rx ? "RX" :
+ (flow_tx ? "TX" : "None"))));
+
+ netif_carrier_on(netdev);
+ ixgbe_check_vf_rate_limit(adapter);
+}
+
+/**
+ * ixgbe_watchdog_link_is_down - update netif_carrier status and
+ * print link down message
+ * @adapter - pointer to the adapter structure
+ **/
+static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ adapter->link_up = false;
+ adapter->link_speed = 0;
+
+ /* only continue if link was up previously */
+ if (!netif_carrier_ok(netdev))
+ return;
+
+ /* poll for SFP+ cable when link is down */
+ if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
+ adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
+
+ e_info(drv, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+}
+
+/**
+ * ixgbe_watchdog_flush_tx - flush queues on link down
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
+{
+ int i;
+ int some_tx_pending = 0;
+
+ if (!netif_carrier_ok(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
+ if (tx_ring->next_to_use != tx_ring->next_to_clean) {
+ some_tx_pending = 1;
+ break;
+ }
+ }
+
+ if (some_tx_pending) {
+ /* We've lost link, so the controller stops DMA,
+ * but we've got queued Tx work that's never going
+ * to get done, so reset controller to flush Tx.
+ * (Do the reset outside of interrupt context).
+ */
+ adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
+ }
+ }
+}
+
+static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
+{
+ u32 ssvpc;
+
+ /* Do not perform spoof check for 82598 */
+ if (adapter->hw.mac.type == ixgbe_mac_82598EB)
+ return;
+
+ ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC);
+
+ /*
+ * ssvpc register is cleared on read, if zero then no
+ * spoofed packets in the last interval.
+ */
+ if (!ssvpc)
+ return;
+
+ e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
+}
+
+/**
+ * ixgbe_watchdog_subtask - check and bring link up
+ * @adapter - pointer to the device adapter structure
+ **/
+static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
+{
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
+ ixgbe_watchdog_update_link(adapter);
+
+ if (adapter->link_up)
+ ixgbe_watchdog_link_is_up(adapter);
+ else
+ ixgbe_watchdog_link_is_down(adapter);
+
+ ixgbe_spoof_check(adapter);
+ ixgbe_update_stats(adapter);
+
+ ixgbe_watchdog_flush_tx(adapter);
+}
+
+/**
+ * ixgbe_sfp_detection_subtask - poll for SFP+ cable
+ * @adapter - the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ s32 err;
+
+ /* not searching for SFP so there is nothing to do here */
+ if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) &&
+ !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+ return;
+
+ /* someone else is in init, wait until next service event */
+ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ return;
+
+ err = hw->phy.ops.identify_sfp(hw);
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto sfp_out;
+
+ if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+ /* If no cable is present, then we need to reset
+ * the next time we find a good cable. */
+ adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
+ }
+
+ /* exit on error */
+ if (err)
+ goto sfp_out;
+
+ /* exit if reset not needed */
+ if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
+ goto sfp_out;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET;
+
+ /*
+ * A module may be identified correctly, but the EEPROM may not have
+ * support for that module. setup_sfp() will fail in that case, so
+ * we should not allow that module to load.
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ err = hw->phy.ops.reset(hw);
+ else
+ err = hw->mac.ops.setup_sfp(hw);
+
+ if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ goto sfp_out;
+
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
+ e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
+
+sfp_out:
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+
+ if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
+ (adapter->netdev->reg_state == NETREG_REGISTERED)) {
+ e_dev_err("failed to initialize because an unsupported "
+ "SFP+ module type was detected.\n");
+ e_dev_err("Reload the driver after installing a "
+ "supported module.\n");
+ unregister_netdev(adapter->netdev);
+ }
+}
+
+/**
+ * ixgbe_sfp_link_config_subtask - set up link SFP after module install
+ * @adapter - the ixgbe adapter structure
+ **/
+static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 autoneg;
+ bool negotiation;
+
+ if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG))
+ return;
+
+ /* someone else is in init, wait until next service event */
+ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ return;
+
+ adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
+
+ autoneg = hw->phy.autoneg_advertised;
+ if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
+ hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
+ hw->mac.autotry_restart = false;
+ if (hw->mac.ops.setup_link)
+ hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
+
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
+}
+
+/**
+ * ixgbe_service_timer - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbe_service_timer(unsigned long data)
+{
+ struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
+ unsigned long next_event_offset;
+
+ /* poll faster when waiting for link */
+ if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
+ next_event_offset = HZ / 10;
+ else
+ next_event_offset = HZ * 2;
+
+ /* Reset the timer */
+ mod_timer(&adapter->service_timer, next_event_offset + jiffies);
+
+ ixgbe_service_event_schedule(adapter);
+}
+
+static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
+{
+ if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED))
+ return;
+
+ adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED;
+
+ /* If we're already down or resetting, just bail */
+ if (test_bit(__IXGBE_DOWN, &adapter->state) ||
+ test_bit(__IXGBE_RESETTING, &adapter->state))
+ return;
+
+ ixgbe_dump(adapter);
+ netdev_err(adapter->netdev, "Reset adapter\n");
+ adapter->tx_timeout_count++;
+
+ ixgbe_reinit_locked(adapter);
+}
+
+/**
+ * ixgbe_service_task - manages and runs subtasks
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbe_service_task(struct work_struct *work)
+{
+ struct ixgbe_adapter *adapter = container_of(work,
+ struct ixgbe_adapter,
+ service_task);
+
+ ixgbe_reset_subtask(adapter);
+ ixgbe_sfp_detection_subtask(adapter);
+ ixgbe_sfp_link_config_subtask(adapter);
+ ixgbe_check_overtemp_subtask(adapter);
+ ixgbe_watchdog_subtask(adapter);
+ ixgbe_fdir_reinit_subtask(adapter);
+ ixgbe_check_hang_subtask(adapter);
+
+ ixgbe_service_event_complete(adapter);
+}
+
+void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens,
+ u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx)
+{
+ struct ixgbe_adv_tx_context_desc *context_desc;
+ u16 i = tx_ring->next_to_use;
+
+ context_desc = IXGBE_TX_CTXTDESC_ADV(tx_ring, i);
+
+ i++;
+ tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
+
+ /* set bits to identify this as an advanced context descriptor */
+ type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
+
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof);
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+}
+
+static int ixgbe_tso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
+ u32 tx_flags, __be16 protocol, u8 *hdr_len)
+{
+ int err;
+ u32 vlan_macip_lens, type_tucmd;
+ u32 mss_l4len_idx, l4len;
+
+ if (!skb_is_gso(skb))
+ return 0;
+
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP;
+
+ if (protocol == __constant_htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ }
+
+ l4len = tcp_hdrlen(skb);
+ *hdr_len = skb_transport_offset(skb) + l4len;
+
+ /* mss_l4len_id: use 1 as index for TSO */
+ mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT;
+ mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
+ mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
+
+ /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
+ vlan_macip_lens = skb_network_header_len(skb);
+ vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+ ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd,
+ mss_l4len_idx);
+
+ return 1;
+}
+
+static bool ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags,
+ __be16 protocol)
+{
+ u32 vlan_macip_lens = 0;
+ u32 mss_l4len_idx = 0;
+ u32 type_tucmd = 0;
+
+ if (skb->ip_summed != CHECKSUM_PARTIAL) {
+ if (!(tx_flags & IXGBE_TX_FLAGS_VLAN))
+ return false;
+ } else {
+ u8 l4_hdr = 0;
+ switch (protocol) {
+ case __constant_htons(ETH_P_IP):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
+ l4_hdr = ip_hdr(skb)->protocol;
+ break;
+ case __constant_htons(ETH_P_IPV6):
+ vlan_macip_lens |= skb_network_header_len(skb);
+ l4_hdr = ipv6_hdr(skb)->nexthdr;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but proto=%x!\n",
+ skb->protocol);
+ }
+ break;
+ }
+
+ switch (l4_hdr) {
+ case IPPROTO_TCP:
+ type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ mss_l4len_idx = tcp_hdrlen(skb) <<
+ IXGBE_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_SCTP:
+ type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP;
+ mss_l4len_idx = sizeof(struct sctphdr) <<
+ IXGBE_ADVTXD_L4LEN_SHIFT;
+ break;
+ case IPPROTO_UDP:
+ mss_l4len_idx = sizeof(struct udphdr) <<
+ IXGBE_ADVTXD_L4LEN_SHIFT;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ dev_warn(tx_ring->dev,
+ "partial checksum but l4 proto=%x!\n",
+ skb->protocol);
+ }
+ break;
+ }
+ }
+
+ vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
+ vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
+
+ ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0,
+ type_tucmd, mss_l4len_idx);
+
+ return (skb->ip_summed == CHECKSUM_PARTIAL);
+}
+
+static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags,
+ unsigned int first, const u8 hdr_len)
+{
+ struct device *dev = tx_ring->dev;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ unsigned int len;
+ unsigned int total = skb->len;
+ unsigned int offset = 0, size, count = 0;
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ unsigned int f;
+ unsigned int bytecount = skb->len;
+ u16 gso_segs = 1;
+ u16 i;
+
+ i = tx_ring->next_to_use;
+
+ if (tx_flags & IXGBE_TX_FLAGS_FCOE)
+ /* excluding fcoe_crc_eof for FCoE */
+ total -= sizeof(struct fcoe_crc_eof);
+
+ len = min(skb_headlen(skb), total);
+ while (len) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
+
+ tx_buffer_info->length = size;
+ tx_buffer_info->mapped_as_page = false;
+ tx_buffer_info->dma = dma_map_single(dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, tx_buffer_info->dma))
+ goto dma_error;
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ len -= size;
+ total -= size;
+ offset += size;
+ count++;
+
+ if (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = min((unsigned int)frag->size, total);
+ offset = frag->page_offset;
+
+ while (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
+
+ tx_buffer_info->length = size;
+ tx_buffer_info->dma = dma_map_page(dev,
+ frag->page,
+ offset, size,
+ DMA_TO_DEVICE);
+ tx_buffer_info->mapped_as_page = true;
+ if (dma_mapping_error(dev, tx_buffer_info->dma))
+ goto dma_error;
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ len -= size;
+ total -= size;
+ offset += size;
+ count++;
+ }
+ if (total == 0)
+ break;
+ }
+
+ if (tx_flags & IXGBE_TX_FLAGS_TSO)
+ gso_segs = skb_shinfo(skb)->gso_segs;
+#ifdef IXGBE_FCOE
+ /* adjust for FCoE Sequence Offload */
+ else if (tx_flags & IXGBE_TX_FLAGS_FSO)
+ gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
+ skb_shinfo(skb)->gso_size);
+#endif /* IXGBE_FCOE */
+ bytecount += (gso_segs - 1) * hdr_len;
+
+ /* multiply data chunks by size of headers */
+ tx_ring->tx_buffer_info[i].bytecount = bytecount;
+ tx_ring->tx_buffer_info[i].gso_segs = gso_segs;
+ tx_ring->tx_buffer_info[i].skb = skb;
+ tx_ring->tx_buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ e_dev_err("TX DMA map failed\n");
+
+ /* clear timestamp and dma mappings for failed tx_buffer_info map */
+ tx_buffer_info->dma = 0;
+ tx_buffer_info->time_stamp = 0;
+ tx_buffer_info->next_to_watch = 0;
+ if (count)
+ count--;
+
+ /* clear timestamp and dma mappings for remaining portion of packet */
+ while (count--) {
+ if (i == 0)
+ i += tx_ring->count;
+ i--;
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
+ }
+
+ return 0;
+}
+
+static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
+ int tx_flags, int count, u32 paylen, u8 hdr_len)
+{
+ union ixgbe_adv_tx_desc *tx_desc = NULL;
+ struct ixgbe_tx_buffer *tx_buffer_info;
+ u32 olinfo_status = 0, cmd_type_len = 0;
+ unsigned int i;
+ u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
+
+ cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
+
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
+
+ if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IXGBE_TX_FLAGS_TSO) {
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+
+ olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ /* use index 1 context for tso */
+ olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+ if (tx_flags & IXGBE_TX_FLAGS_IPV4)
+ olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ } else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
+ olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+ olinfo_status |= IXGBE_ADVTXD_CC;
+ olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+ if (tx_flags & IXGBE_TX_FLAGS_FSO)
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+ }
+
+ olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
+
+ i = tx_ring->next_to_use;
+ while (count--) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | tx_buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
+
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, tx_ring->tail);
+}
+
+static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
+ u32 tx_flags, __be16 protocol)
+{
+ struct ixgbe_q_vector *q_vector = ring->q_vector;
+ union ixgbe_atr_hash_dword input = { .dword = 0 };
+ union ixgbe_atr_hash_dword common = { .dword = 0 };
+ union {
+ unsigned char *network;
+ struct iphdr *ipv4;
+ struct ipv6hdr *ipv6;
+ } hdr;
+ struct tcphdr *th;
+ __be16 vlan_id;
+
+ /* if ring doesn't have a interrupt vector, cannot perform ATR */
+ if (!q_vector)
+ return;
+
+ /* do nothing if sampling is disabled */
+ if (!ring->atr_sample_rate)
+ return;
+
+ ring->atr_count++;
+
+ /* snag network header to get L4 type and address */
+ hdr.network = skb_network_header(skb);
+
+ /* Currently only IPv4/IPv6 with TCP is supported */
+ if ((protocol != __constant_htons(ETH_P_IPV6) ||
+ hdr.ipv6->nexthdr != IPPROTO_TCP) &&
+ (protocol != __constant_htons(ETH_P_IP) ||
+ hdr.ipv4->protocol != IPPROTO_TCP))
+ return;
+
+ th = tcp_hdr(skb);
+
+ /* skip this packet since the socket is closing */
+ if (th->fin)
+ return;
+
+ /* sample on all syn packets or once every atr sample count */
+ if (!th->syn && (ring->atr_count < ring->atr_sample_rate))
+ return;
+
+ /* reset sample count */
+ ring->atr_count = 0;
+
+ vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
+
+ /*
+ * src and dst are inverted, think how the receiver sees them
+ *
+ * The input is broken into two sections, a non-compressed section
+ * containing vm_pool, vlan_id, and flow_type. The rest of the data
+ * is XORed together and stored in the compressed dword.
+ */
+ input.formatted.vlan_id = vlan_id;
+
+ /*
+ * since src port and flex bytes occupy the same word XOR them together
+ * and write the value to source port portion of compressed dword
+ */
+ if (vlan_id)
+ common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
+ else
+ common.port.src ^= th->dest ^ protocol;
+ common.port.dst ^= th->source;
+
+ if (protocol == __constant_htons(ETH_P_IP)) {
+ input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
+ common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
+ } else {
+ input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6;
+ common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^
+ hdr.ipv6->saddr.s6_addr32[1] ^
+ hdr.ipv6->saddr.s6_addr32[2] ^
+ hdr.ipv6->saddr.s6_addr32[3] ^
+ hdr.ipv6->daddr.s6_addr32[0] ^
+ hdr.ipv6->daddr.s6_addr32[1] ^
+ hdr.ipv6->daddr.s6_addr32[2] ^
+ hdr.ipv6->daddr.s6_addr32[3];
+ }
+
+ /* This assumes the Rx queue and Tx queue are bound to the same CPU */
+ ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
+ input, common, ring->queue_index);
+}
+
+static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
+{
+ netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(ixgbe_desc_unused(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! - use start_queue because it doesn't call schedule */
+ netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
+ ++tx_ring->tx_stats.restart_queue;
+ return 0;
+}
+
+static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
+{
+ if (likely(ixgbe_desc_unused(tx_ring) >= size))
+ return 0;
+ return __ixgbe_maybe_stop_tx(tx_ring, size);
+}
+
+static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
+ smp_processor_id();
+#ifdef IXGBE_FCOE
+ __be16 protocol = vlan_get_protocol(skb);
+
+ if (((protocol == htons(ETH_P_FCOE)) ||
+ (protocol == htons(ETH_P_FIP))) &&
+ (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) {
+ txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
+ txq += adapter->ring_feature[RING_F_FCOE].mask;
+ return txq;
+ }
+#endif
+
+ if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
+ while (unlikely(txq >= dev->real_num_tx_queues))
+ txq -= dev->real_num_tx_queues;
+ return txq;
+ }
+
+ return skb_tx_hash(dev, skb);
+}
+
+netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
+ struct ixgbe_adapter *adapter,
+ struct ixgbe_ring *tx_ring)
+{
+ int tso;
+ u32 tx_flags = 0;
+#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
+ unsigned short f;
+#endif
+ u16 first;
+ u16 count = TXD_USE_COUNT(skb_headlen(skb));
+ __be16 protocol;
+ u8 hdr_len = 0;
+
+ /*
+ * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD,
+ * + 1 desc for skb_head_len/IXGBE_MAX_DATA_PER_TXD,
+ * + 2 desc gap to keep tail from touching head,
+ * + 1 desc for context descriptor,
+ * otherwise try next time
+ */
+#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+#else
+ count += skb_shinfo(skb)->nr_frags;
+#endif
+ if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) {
+ tx_ring->tx_stats.tx_busy++;
+ return NETDEV_TX_BUSY;
+ }
+
+ protocol = vlan_get_protocol(skb);
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= vlan_tx_tag_get(skb);
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
+ tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
+ tx_flags |= tx_ring->dcb_tc << 13;
+ }
+ tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ } else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED &&
+ skb->priority != TC_PRIO_CONTROL) {
+ tx_flags |= tx_ring->dcb_tc << 13;
+ tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ }
+
+#ifdef IXGBE_FCOE
+ /* for FCoE with DCB, we force the priority to what
+ * was specified by the switch */
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
+ (protocol == htons(ETH_P_FCOE)))
+ tx_flags |= IXGBE_TX_FLAGS_FCOE;
+
+#endif
+ /* record the location of the first descriptor for this packet */
+ first = tx_ring->next_to_use;
+
+ if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
+#ifdef IXGBE_FCOE
+ /* setup tx offload for FCoE */
+ tso = ixgbe_fso(tx_ring, skb, tx_flags, &hdr_len);
+ if (tso < 0)
+ goto out_drop;
+ else if (tso)
+ tx_flags |= IXGBE_TX_FLAGS_FSO;
+#endif /* IXGBE_FCOE */
+ } else {
+ if (protocol == htons(ETH_P_IP))
+ tx_flags |= IXGBE_TX_FLAGS_IPV4;
+ tso = ixgbe_tso(tx_ring, skb, tx_flags, protocol, &hdr_len);
+ if (tso < 0)
+ goto out_drop;
+ else if (tso)
+ tx_flags |= IXGBE_TX_FLAGS_TSO;
+ else if (ixgbe_tx_csum(tx_ring, skb, tx_flags, protocol))
+ tx_flags |= IXGBE_TX_FLAGS_CSUM;
+ }
+
+ count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
+ if (count) {
+ /* add the ATR filter if ATR is on */
+ if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
+ ixgbe_atr(tx_ring, skb, tx_flags, protocol);
+ ixgbe_tx_queue(tx_ring, tx_flags, count, skb->len, hdr_len);
+ ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
+
+ } else {
+ tx_ring->tx_buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ goto out_drop;
+ }
+
+ return NETDEV_TX_OK;
+
+out_drop:
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+}
+
+static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_ring *tx_ring;
+
+ tx_ring = adapter->tx_ring[skb->queue_mapping];
+ return ixgbe_xmit_frame_ring(skb, adapter, tx_ring);
+}
+
+/**
+ * ixgbe_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbe_set_mac(struct net_device *netdev, void *p)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
+ IXGBE_RAH_AV);
+
+ return 0;
+}
+
+static int
+ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u16 value;
+ int rc;
+
+ if (prtad != hw->phy.mdio.prtad)
+ return -EINVAL;
+ rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
+ if (!rc)
+ rc = value;
+ return rc;
+}
+
+static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
+ u16 addr, u16 value)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (prtad != hw->phy.mdio.prtad)
+ return -EINVAL;
+ return hw->phy.ops.write_reg(hw, addr, devad, value);
+}
+
+static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
+}
+
+/**
+ * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
+ * netdev->dev_addrs
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_add_sanmac_netdev(struct net_device *dev)
+{
+ int err = 0;
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+ if (is_valid_ether_addr(mac->san_addr)) {
+ rtnl_lock();
+ err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+ rtnl_unlock();
+ }
+ return err;
+}
+
+/**
+ * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
+ * netdev->dev_addrs
+ * @netdev: network interface device structure
+ *
+ * Returns non-zero on failure
+ **/
+static int ixgbe_del_sanmac_netdev(struct net_device *dev)
+{
+ int err = 0;
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+ if (is_valid_ether_addr(mac->san_addr)) {
+ rtnl_lock();
+ err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
+ rtnl_unlock();
+ }
+ return err;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling 'interrupt' - used by things like netconsole to send skbs
+ * without having to re-enable interrupts. It's not called while
+ * the interrupt routine is executing.
+ */
+static void ixgbe_netpoll(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ /* if interface is down do nothing */
+ if (test_bit(__IXGBE_DOWN, &adapter->state))
+ return;
+
+ adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ for (i = 0; i < num_q_vectors; i++) {
+ struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
+ ixgbe_msix_clean_many(0, q_vector);
+ }
+ } else {
+ ixgbe_intr(adapter->pdev->irq, netdev);
+ }
+ adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
+}
+#endif
+
+static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
+ struct rtnl_link_stats64 *stats)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ rcu_read_lock();
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]);
+ u64 bytes, packets;
+ unsigned int start;
+
+ if (ring) {
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->syncp);
+ packets = ring->stats.packets;
+ bytes = ring->stats.bytes;
+ } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+ stats->rx_packets += packets;
+ stats->rx_bytes += bytes;
+ }
+ }
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]);
+ u64 bytes, packets;
+ unsigned int start;
+
+ if (ring) {
+ do {
+ start = u64_stats_fetch_begin_bh(&ring->syncp);
+ packets = ring->stats.packets;
+ bytes = ring->stats.bytes;
+ } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
+ stats->tx_packets += packets;
+ stats->tx_bytes += bytes;
+ }
+ }
+ rcu_read_unlock();
+ /* following stats updated by ixgbe_watchdog_task() */
+ stats->multicast = netdev->stats.multicast;
+ stats->rx_errors = netdev->stats.rx_errors;
+ stats->rx_length_errors = netdev->stats.rx_length_errors;
+ stats->rx_crc_errors = netdev->stats.rx_crc_errors;
+ stats->rx_missed_errors = netdev->stats.rx_missed_errors;
+ return stats;
+}
+
+/* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid.
+ * #adapter: pointer to ixgbe_adapter
+ * @tc: number of traffic classes currently enabled
+ *
+ * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm
+ * 802.1Q priority maps to a packet buffer that exists.
+ */
+static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg, rsave;
+ int i;
+
+ /* 82598 have a static priority to TC mapping that can not
+ * be changed so no validation is needed.
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return;
+
+ reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
+ rsave = reg;
+
+ for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
+ u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT);
+
+ /* If up2tc is out of bounds default to zero */
+ if (up2tc > tc)
+ reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT);
+ }
+
+ if (reg != rsave)
+ IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
+
+ return;
+}
+
+
+/* ixgbe_setup_tc - routine to configure net_device for multiple traffic
+ * classes.
+ *
+ * @netdev: net device to configure
+ * @tc: number of traffic classes to enable
+ */
+int ixgbe_setup_tc(struct net_device *dev, u8 tc)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(dev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* If DCB is anabled do not remove traffic classes, multiple
+ * traffic classes are required to implement DCB
+ */
+ if (!tc && (adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+ return 0;
+
+ /* Hardware supports up to 8 traffic classes */
+ if (tc > MAX_TRAFFIC_CLASS ||
+ (hw->mac.type == ixgbe_mac_82598EB && tc < MAX_TRAFFIC_CLASS))
+ return -EINVAL;
+
+ /* Hardware has to reinitialize queues and interrupts to
+ * match packet buffer alignment. Unfortunantly, the
+ * hardware is not flexible enough to do this dynamically.
+ */
+ if (netif_running(dev))
+ ixgbe_close(dev);
+ ixgbe_clear_interrupt_scheme(adapter);
+
+ if (tc)
+ netdev_set_num_tc(dev, tc);
+ else
+ netdev_reset_tc(dev);
+
+ ixgbe_init_interrupt_scheme(adapter);
+ ixgbe_validate_rtr(adapter, tc);
+ if (netif_running(dev))
+ ixgbe_open(dev);
+
+ return 0;
+}
+
+void ixgbe_do_reset(struct net_device *netdev)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev))
+ ixgbe_reinit_locked(adapter);
+ else
+ ixgbe_reset(adapter);
+}
+
+static u32 ixgbe_fix_features(struct net_device *netdev, u32 data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+#ifdef CONFIG_DCB
+ if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
+ data &= ~NETIF_F_HW_VLAN_RX;
+#endif
+
+ /* return error if RXHASH is being enabled when RSS is not supported */
+ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
+ data &= ~NETIF_F_RXHASH;
+
+ /* If Rx checksum is disabled, then RSC/LRO should also be disabled */
+ if (!(data & NETIF_F_RXCSUM))
+ data &= ~NETIF_F_LRO;
+
+ /* Turn off LRO if not RSC capable or invalid ITR settings */
+ if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
+ data &= ~NETIF_F_LRO;
+ } else if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
+ (adapter->rx_itr_setting != 1 &&
+ adapter->rx_itr_setting > IXGBE_MAX_RSC_INT_RATE)) {
+ data &= ~NETIF_F_LRO;
+ e_info(probe, "rx-usecs set too low, not enabling RSC\n");
+ }
+
+ return data;
+}
+
+static int ixgbe_set_features(struct net_device *netdev, u32 data)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ bool need_reset = false;
+
+ /* If Rx checksum is disabled, then RSC/LRO should also be disabled */
+ if (!(data & NETIF_F_RXCSUM))
+ adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
+ else
+ adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+
+ /* Make sure RSC matches LRO, reset if change */
+ if (!!(data & NETIF_F_LRO) !=
+ !!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
+ adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_X540:
+ case ixgbe_mac_82599EB:
+ need_reset = true;
+ break;
+ default:
+ break;
+ }
+ }
+
+ /*
+ * Check if Flow Director n-tuple support was enabled or disabled. If
+ * the state changed, we need to reset.
+ */
+ if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
+ /* turn off ATR, enable perfect filters and reset */
+ if (data & NETIF_F_NTUPLE) {
+ adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+ need_reset = true;
+ }
+ } else if (!(data & NETIF_F_NTUPLE)) {
+ /* turn off Flow Director, set ATR and reset */
+ adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
+ if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
+ !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
+ adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+ need_reset = true;
+ }
+
+ if (need_reset)
+ ixgbe_do_reset(netdev);
+
+ return 0;
+
+}
+
+static const struct net_device_ops ixgbe_netdev_ops = {
+ .ndo_open = ixgbe_open,
+ .ndo_stop = ixgbe_close,
+ .ndo_start_xmit = ixgbe_xmit_frame,
+ .ndo_select_queue = ixgbe_select_queue,
+ .ndo_set_rx_mode = ixgbe_set_rx_mode,
+ .ndo_set_multicast_list = ixgbe_set_rx_mode,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ixgbe_set_mac,
+ .ndo_change_mtu = ixgbe_change_mtu,
+ .ndo_tx_timeout = ixgbe_tx_timeout,
+ .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid,
+ .ndo_do_ioctl = ixgbe_ioctl,
+ .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac,
+ .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan,
+ .ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw,
+ .ndo_get_vf_config = ixgbe_ndo_get_vf_config,
+ .ndo_get_stats64 = ixgbe_get_stats64,
+ .ndo_setup_tc = ixgbe_setup_tc,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = ixgbe_netpoll,
+#endif
+#ifdef IXGBE_FCOE
+ .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
+ .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target,
+ .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
+ .ndo_fcoe_enable = ixgbe_fcoe_enable,
+ .ndo_fcoe_disable = ixgbe_fcoe_disable,
+ .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
+#endif /* IXGBE_FCOE */
+ .ndo_set_features = ixgbe_set_features,
+ .ndo_fix_features = ixgbe_fix_features,
+};
+
+static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
+ const struct ixgbe_info *ii)
+{
+#ifdef CONFIG_PCI_IOV
+ struct ixgbe_hw *hw = &adapter->hw;
+ int err;
+ int num_vf_macvlans, i;
+ struct vf_macvlans *mv_list;
+
+ if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
+ return;
+
+ /* The 82599 supports up to 64 VFs per physical function
+ * but this implementation limits allocation to 63 so that
+ * basic networking resources are still available to the
+ * physical function
+ */
+ adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs;
+ adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
+ err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
+ if (err) {
+ e_err(probe, "Failed to enable PCI sriov: %d\n", err);
+ goto err_novfs;
+ }
+
+ num_vf_macvlans = hw->mac.num_rar_entries -
+ (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
+
+ adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
+ sizeof(struct vf_macvlans),
+ GFP_KERNEL);
+ if (mv_list) {
+ /* Initialize list of VF macvlans */
+ INIT_LIST_HEAD(&adapter->vf_mvs.l);
+ for (i = 0; i < num_vf_macvlans; i++) {
+ mv_list->vf = -1;
+ mv_list->free = true;
+ mv_list->rar_entry = hw->mac.num_rar_entries -
+ (i + adapter->num_vfs + 1);
+ list_add(&mv_list->l, &adapter->vf_mvs.l);
+ mv_list++;
+ }
+ }
+
+ /* If call to enable VFs succeeded then allocate memory
+ * for per VF control structures.
+ */
+ adapter->vfinfo =
+ kcalloc(adapter->num_vfs,
+ sizeof(struct vf_data_storage), GFP_KERNEL);
+ if (adapter->vfinfo) {
+ /* Now that we're sure SR-IOV is enabled
+ * and memory allocated set up the mailbox parameters
+ */
+ ixgbe_init_mbx_params_pf(hw);
+ memcpy(&hw->mbx.ops, ii->mbx_ops,
+ sizeof(hw->mbx.ops));
+
+ /* Disable RSC when in SR-IOV mode */
+ adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
+ IXGBE_FLAG2_RSC_ENABLED);
+ return;
+ }
+
+ /* Oh oh */
+ e_err(probe, "Unable to allocate memory for VF Data Storage - "
+ "SRIOV disabled\n");
+ pci_disable_sriov(adapter->pdev);
+
+err_novfs:
+ adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
+ adapter->num_vfs = 0;
+#endif /* CONFIG_PCI_IOV */
+}
+
+/**
+ * ixgbe_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgbe_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgbe_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit ixgbe_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct ixgbe_adapter *adapter = NULL;
+ struct ixgbe_hw *hw;
+ const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
+ static int cards_found;
+ int i, err, pci_using_dac;
+ u8 part_str[IXGBE_PBANUM_LENGTH];
+ unsigned int indices = num_possible_cpus();
+#ifdef IXGBE_FCOE
+ u16 device_caps;
+#endif
+ u32 eec;
+
+ /* Catch broken hardware that put the wrong VF device ID in
+ * the PCIe SR-IOV capability.
+ */
+ if (pdev->is_virtfn) {
+ WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
+ pci_name(pdev), pdev->vendor, pdev->device);
+ return -EINVAL;
+ }
+
+ err = pci_enable_device_mem(pdev);
+ if (err)
+ return err;
+
+ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
+ !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev,
+ "No usable DMA configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM), ixgbe_driver_name);
+ if (err) {
+ dev_err(&pdev->dev,
+ "pci_request_selected_regions failed 0x%x\n", err);
+ goto err_pci_reg;
+ }
+
+ pci_enable_pcie_error_reporting(pdev);
+
+ pci_set_master(pdev);
+ pci_save_state(pdev);
+
+#ifdef CONFIG_IXGBE_DCB
+ indices *= MAX_TRAFFIC_CLASS;
+#endif
+
+ if (ii->mac == ixgbe_mac_82598EB)
+ indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES);
+ else
+ indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES);
+
+#ifdef IXGBE_FCOE
+ indices += min_t(unsigned int, num_possible_cpus(),
+ IXGBE_MAX_FCOE_INDICES);
+#endif
+ netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ adapter = netdev_priv(netdev);
+ pci_set_drvdata(pdev, adapter);
+
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+ hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!hw->hw_addr) {
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ for (i = 1; i <= 5; i++) {
+ if (pci_resource_len(pdev, i) == 0)
+ continue;
+ }
+
+ netdev->netdev_ops = &ixgbe_netdev_ops;
+ ixgbe_set_ethtool_ops(netdev);
+ netdev->watchdog_timeo = 5 * HZ;
+ strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
+
+ adapter->bd_number = cards_found;
+
+ /* Setup hw api */
+ memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
+ hw->mac.type = ii->mac;
+
+ /* EEPROM */
+ memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
+ if (!(eec & (1 << 8)))
+ hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
+
+ /* PHY */
+ memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ /* ixgbe_identify_phy_generic will set prtad and mmds properly */
+ hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
+ hw->phy.mdio.mmds = 0;
+ hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
+ hw->phy.mdio.dev = netdev;
+ hw->phy.mdio.mdio_read = ixgbe_mdio_read;
+ hw->phy.mdio.mdio_write = ixgbe_mdio_write;
+
+ ii->get_invariants(hw);
+
+ /* setup the private structure */
+ err = ixgbe_sw_init(adapter);
+ if (err)
+ goto err_sw_init;
+
+ /* Make it possible the adapter to be woken up via WOL */
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+ break;
+ default:
+ break;
+ }
+
+ /*
+ * If there is a fan on this device and it has failed log the
+ * failure.
+ */
+ if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
+ u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+ if (esdp & IXGBE_ESDP_SDP1)
+ e_crit(probe, "Fan has stopped, replace the adapter\n");
+ }
+
+ /* reset_hw fills in the perm_addr as well */
+ hw->phy.reset_if_overtemp = true;
+ err = hw->mac.ops.reset_hw(hw);
+ hw->phy.reset_if_overtemp = false;
+ if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
+ hw->mac.type == ixgbe_mac_82598EB) {
+ err = 0;
+ } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ e_dev_err("failed to load because an unsupported SFP+ "
+ "module type was detected.\n");
+ e_dev_err("Reload the driver after installing a supported "
+ "module.\n");
+ goto err_sw_init;
+ } else if (err) {
+ e_dev_err("HW Init failed: %d\n", err);
+ goto err_sw_init;
+ }
+
+ ixgbe_probe_vf(adapter, ii);
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_IPV6_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER |
+ NETIF_F_TSO |
+ NETIF_F_TSO6 |
+ NETIF_F_GRO |
+ NETIF_F_RXHASH |
+ NETIF_F_RXCSUM;
+
+ netdev->hw_features = netdev->features;
+
+ switch (adapter->hw.mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ netdev->hw_features |= NETIF_F_SCTP_CSUM |
+ NETIF_F_NTUPLE;
+ break;
+ default:
+ break;
+ }
+
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
+ IXGBE_FLAG_DCB_ENABLED);
+
+#ifdef CONFIG_IXGBE_DCB
+ netdev->dcbnl_ops = &dcbnl_ops;
+#endif
+
+#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
+ if (hw->mac.ops.get_device_caps) {
+ hw->mac.ops.get_device_caps(hw, &device_caps);
+ if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+ adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
+ }
+ }
+ if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
+ netdev->vlan_features |= NETIF_F_FCOE_CRC;
+ netdev->vlan_features |= NETIF_F_FSO;
+ netdev->vlan_features |= NETIF_F_FCOE_MTU;
+ }
+#endif /* IXGBE_FCOE */
+ if (pci_using_dac) {
+ netdev->features |= NETIF_F_HIGHDMA;
+ netdev->vlan_features |= NETIF_F_HIGHDMA;
+ }
+
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
+ netdev->hw_features |= NETIF_F_LRO;
+ if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
+ netdev->features |= NETIF_F_LRO;
+
+ /* make sure the EEPROM is good */
+ if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
+ e_dev_err("The EEPROM Checksum Is Not Valid\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
+
+ if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
+ e_dev_err("invalid MAC address\n");
+ err = -EIO;
+ goto err_eeprom;
+ }
+
+ /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
+ if (hw->mac.ops.disable_tx_laser &&
+ ((hw->phy.multispeed_fiber) ||
+ ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
+ (hw->mac.type == ixgbe_mac_82599EB))))
+ hw->mac.ops.disable_tx_laser(hw);
+
+ setup_timer(&adapter->service_timer, &ixgbe_service_timer,
+ (unsigned long) adapter);
+
+ INIT_WORK(&adapter->service_task, ixgbe_service_task);
+ clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
+
+ err = ixgbe_init_interrupt_scheme(adapter);
+ if (err)
+ goto err_sw_init;
+
+ if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) {
+ netdev->hw_features &= ~NETIF_F_RXHASH;
+ netdev->features &= ~NETIF_F_RXHASH;
+ }
+
+ switch (pdev->device) {
+ case IXGBE_DEV_ID_82599_SFP:
+ /* Only this subdevice supports WOL */
+ if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP)
+ adapter->wol = IXGBE_WUFC_MAG;
+ break;
+ case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
+ /* All except this subdevice support WOL */
+ if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
+ adapter->wol = IXGBE_WUFC_MAG;
+ break;
+ case IXGBE_DEV_ID_82599_KX4:
+ adapter->wol = IXGBE_WUFC_MAG;
+ break;
+ default:
+ adapter->wol = 0;
+ break;
+ }
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
+ /* pick up the PCI bus settings for reporting later */
+ hw->mac.ops.get_bus_info(hw);
+
+ /* print bus type/speed/width info */
+ e_dev_info("(PCI Express:%s:%s) %pM\n",
+ (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
+ hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
+ "Unknown"),
+ (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
+ hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
+ hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" :
+ "Unknown"),
+ netdev->dev_addr);
+
+ err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH);
+ if (err)
+ strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH);
+ if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
+ e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
+ hw->mac.type, hw->phy.type, hw->phy.sfp_type,
+ part_str);
+ else
+ e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
+ hw->mac.type, hw->phy.type, part_str);
+
+ if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
+ e_dev_warn("PCI-Express bandwidth available for this card is "
+ "not sufficient for optimal performance.\n");
+ e_dev_warn("For optimal performance a x8 PCI-Express slot "
+ "is required.\n");
+ }
+
+ /* save off EEPROM version number */
+ hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
+
+ /* reset the hardware with the new settings */
+ err = hw->mac.ops.start_hw(hw);
+
+ if (err == IXGBE_ERR_EEPROM_VERSION) {
+ /* We are running on a pre-production device, log a warning */
+ e_dev_warn("This device is a pre-production adapter/LOM. "
+ "Please be aware there may be issues associated "
+ "with your hardware. If you are experiencing "
+ "problems please contact your Intel or hardware "
+ "representative who provided you with this "
+ "hardware.\n");
+ }
+ strcpy(netdev->name, "eth%d");
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to ethtool even BEFORE open */
+ netif_carrier_off(netdev);
+
+#ifdef CONFIG_IXGBE_DCA
+ if (dca_add_requester(&pdev->dev) == 0) {
+ adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
+ ixgbe_setup_dca(adapter);
+ }
+#endif
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
+ e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
+ for (i = 0; i < adapter->num_vfs; i++)
+ ixgbe_vf_configuration(pdev, (i | 0x10000000));
+ }
+
+ /* Inform firmware of driver version */
+ if (hw->mac.ops.set_fw_drv_ver)
+ hw->mac.ops.set_fw_drv_ver(hw, MAJ, MIN, BUILD,
+ FW_CEM_UNUSED_VER);
+
+ /* add san mac addr to netdev */
+ ixgbe_add_sanmac_netdev(netdev);
+
+ e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
+ cards_found++;
+ return 0;
+
+err_register:
+ ixgbe_release_hw_control(adapter);
+ ixgbe_clear_interrupt_scheme(adapter);
+err_sw_init:
+err_eeprom:
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
+ adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_selected_regions(pdev,
+ pci_select_bars(pdev, IORESOURCE_MEM));
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * ixgbe_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgbe_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit ixgbe_remove(struct pci_dev *pdev)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+
+ set_bit(__IXGBE_DOWN, &adapter->state);
+ cancel_work_sync(&adapter->service_task);
+
+#ifdef CONFIG_IXGBE_DCA
+ if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
+ adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
+ dca_remove_requester(&pdev->dev);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
+ }
+
+#endif
+#ifdef IXGBE_FCOE
+ if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
+ ixgbe_cleanup_fcoe(adapter);
+
+#endif /* IXGBE_FCOE */
+
+ /* remove the added san mac */
+ ixgbe_del_sanmac_netdev(netdev);
+
+ if (netdev->reg_state == NETREG_REGISTERED)
+ unregister_netdev(netdev);
+
+ if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
+ ixgbe_disable_sriov(adapter);
+
+ ixgbe_clear_interrupt_scheme(adapter);
+
+ ixgbe_release_hw_control(adapter);
+
+ iounmap(adapter->hw.hw_addr);
+ pci_release_selected_regions(pdev, pci_select_bars(pdev,
+ IORESOURCE_MEM));
+
+ e_dev_info("complete\n");
+
+ free_netdev(netdev);
+
+ pci_disable_pcie_error_reporting(pdev);
+
+ pci_disable_device(pdev);
+}
+
+/**
+ * ixgbe_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+
+ netif_device_detach(netdev);
+
+ if (state == pci_channel_io_perm_failure)
+ return PCI_ERS_RESULT_DISCONNECT;
+
+ if (netif_running(netdev))
+ ixgbe_down(adapter);
+ pci_disable_device(pdev);
+
+ /* Request a slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * ixgbe_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ pci_ers_result_t result;
+ int err;
+
+ if (pci_enable_device_mem(pdev)) {
+ e_err(probe, "Cannot re-enable PCI device after reset.\n");
+ result = PCI_ERS_RESULT_DISCONNECT;
+ } else {
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+ pci_save_state(pdev);
+
+ pci_wake_from_d3(pdev, false);
+
+ ixgbe_reset(adapter);
+ IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+ result = PCI_ERS_RESULT_RECOVERED;
+ }
+
+ err = pci_cleanup_aer_uncorrect_error_status(pdev);
+ if (err) {
+ e_dev_err("pci_cleanup_aer_uncorrect_error_status "
+ "failed 0x%0x\n", err);
+ /* non-fatal, continue */
+ }
+
+ return result;
+}
+
+/**
+ * ixgbe_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void ixgbe_io_resume(struct pci_dev *pdev)
+{
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ struct net_device *netdev = adapter->netdev;
+
+ if (netif_running(netdev)) {
+ if (ixgbe_up(adapter)) {
+ e_info(probe, "ixgbe_up failed after reset\n");
+ return;
+ }
+ }
+
+ netif_device_attach(netdev);
+}
+
+static struct pci_error_handlers ixgbe_err_handler = {
+ .error_detected = ixgbe_io_error_detected,
+ .slot_reset = ixgbe_io_slot_reset,
+ .resume = ixgbe_io_resume,
+};
+
+static struct pci_driver ixgbe_driver = {
+ .name = ixgbe_driver_name,
+ .id_table = ixgbe_pci_tbl,
+ .probe = ixgbe_probe,
+ .remove = __devexit_p(ixgbe_remove),
+#ifdef CONFIG_PM
+ .suspend = ixgbe_suspend,
+ .resume = ixgbe_resume,
+#endif
+ .shutdown = ixgbe_shutdown,
+ .err_handler = &ixgbe_err_handler
+};
+
+/**
+ * ixgbe_init_module - Driver Registration Routine
+ *
+ * ixgbe_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init ixgbe_init_module(void)
+{
+ int ret;
+ pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version);
+ pr_info("%s\n", ixgbe_copyright);
+
+#ifdef CONFIG_IXGBE_DCA
+ dca_register_notify(&dca_notifier);
+#endif
+
+ ret = pci_register_driver(&ixgbe_driver);
+ return ret;
+}
+
+module_init(ixgbe_init_module);
+
+/**
+ * ixgbe_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgbe_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit ixgbe_exit_module(void)
+{
+#ifdef CONFIG_IXGBE_DCA
+ dca_unregister_notify(&dca_notifier);
+#endif
+ pci_unregister_driver(&ixgbe_driver);
+ rcu_barrier(); /* Wait for completion of call_rcu()'s */
+}
+
+#ifdef CONFIG_IXGBE_DCA
+static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
+ void *p)
+{
+ int ret_val;
+
+ ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event,
+ __ixgbe_notify_dca);
+
+ return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
+}
+
+#endif /* CONFIG_IXGBE_DCA */
+
+module_exit(ixgbe_exit_module);
+
+/* ixgbe_main.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "ixgbe_type.h"
+#include "ixgbe_common.h"
+#include "ixgbe_mbx.h"
+
+/**
+ * ixgbe_read_mbx - Reads a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to read
+ *
+ * returns SUCCESS if it successfuly read message from buffer
+ **/
+s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ /* limit read to size of mailbox */
+ if (size > mbx->size)
+ size = mbx->size;
+
+ if (mbx->ops.read)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_mbx - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = 0;
+
+ if (size > mbx->size)
+ ret_val = IXGBE_ERR_MBX;
+
+ else if (mbx->ops.write)
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_msg - checks to see if someone sent us mail
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (mbx->ops.check_for_msg)
+ ret_val = mbx->ops.check_for_msg(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_ack - checks to see if someone sent us ACK
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (mbx->ops.check_for_ack)
+ ret_val = mbx->ops.check_for_ack(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_rst - checks to see if other side has reset
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to check
+ *
+ * returns SUCCESS if the Status bit was found or else ERR_MBX
+ **/
+s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (mbx->ops.check_for_rst)
+ ret_val = mbx->ops.check_for_rst(hw, mbx_id);
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification
+ **/
+static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_msg)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+out:
+ return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbe_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message acknowledgement
+ **/
+static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ if (!countdown || !mbx->ops.check_for_ack)
+ goto out;
+
+ while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
+ countdown--;
+ if (!countdown)
+ break;
+ udelay(mbx->usec_delay);
+ }
+
+out:
+ return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbe_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (!mbx->ops.read)
+ goto out;
+
+ ret_val = ixgbe_poll_for_msg(hw, mbx_id);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size, mbx_id);
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @mbx_id: id of mailbox to write
+ *
+ * returns SUCCESS if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 mbx_id)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ /* exit if either we can't write or there isn't a defined timeout */
+ if (!mbx->ops.write || !mbx->timeout)
+ goto out;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size, mbx_id);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = ixgbe_poll_for_ack(hw, mbx_id);
+out:
+ return ret_val;
+}
+
+static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
+{
+ u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (mbvficr & mask) {
+ ret_val = 0;
+ IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+ u32 vf_bit = vf_number % 16;
+
+ if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
+ index)) {
+ ret_val = 0;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ s32 index = IXGBE_MBVFICR_INDEX(vf_number);
+ u32 vf_bit = vf_number % 16;
+
+ if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
+ index)) {
+ ret_val = 0;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_check_for_rst_pf - checks to see if the VF has reset
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ u32 reg_offset = (vf_number < 32) ? 0 : 1;
+ u32 vf_shift = vf_number % 32;
+ u32 vflre = 0;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
+ break;
+ case ixgbe_mac_X540:
+ vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
+ break;
+ default:
+ break;
+ }
+
+ if (vflre & (1 << vf_shift)) {
+ ret_val = 0;
+ IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ * @vf_number: the VF index
+ *
+ * return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+ u32 p2v_mailbox;
+
+ /* Take ownership of the buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
+
+ /* reserve mailbox for vf use */
+ p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
+ if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
+ ret_val = 0;
+
+ return ret_val;
+}
+
+/**
+ * ixgbe_write_mbx_pf - Places a message in the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * returns SUCCESS if it successfully copied message into the buffer
+ **/
+static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ ixgbe_check_for_msg_pf(hw, vf_number);
+ ixgbe_check_for_ack_pf(hw, vf_number);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
+
+ /* Interrupt VF to tell it a message has been sent and release buffer*/
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+out_no_write:
+ return ret_val;
+
+}
+
+/**
+ * ixgbe_read_mbx_pf - Read a message from the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ * @vf_number: the VF index
+ *
+ * This function copies a message from the mailbox buffer to the caller's
+ * memory buffer. The presumption is that the caller knows that there was
+ * a message due to a VF request so no polling for message is needed.
+ **/
+static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
+ u16 vf_number)
+{
+ s32 ret_val;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
+
+ /* Acknowledge the message and release buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+#ifdef CONFIG_PCI_IOV
+/**
+ * ixgbe_init_mbx_params_pf - set initial values for pf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for pf mailbox
+ */
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+ if (hw->mac.type != ixgbe_mac_82599EB &&
+ hw->mac.type != ixgbe_mac_X540)
+ return;
+
+ mbx->timeout = 0;
+ mbx->usec_delay = 0;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ mbx->size = IXGBE_VFMAILBOX_SIZE;
+}
+#endif /* CONFIG_PCI_IOV */
+
+struct ixgbe_mbx_operations mbx_ops_generic = {
+ .read = ixgbe_read_mbx_pf,
+ .write = ixgbe_write_mbx_pf,
+ .read_posted = ixgbe_read_posted_mbx,
+ .write_posted = ixgbe_write_posted_mbx,
+ .check_for_msg = ixgbe_check_for_msg_pf,
+ .check_for_ack = ixgbe_check_for_ack_pf,
+ .check_for_rst = ixgbe_check_for_rst_pf,
+};
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "ixgbe_type.h"
+
+#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX -100
+
+#define IXGBE_VFMAILBOX 0x002FC
+#define IXGBE_VFMBMEM 0x00200
+
+#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+#define IXGBE_VF_RESET 0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD 3
+
+#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
+
+s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
+s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
+s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
+#ifdef CONFIG_PCI_IOV
+void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
+#endif /* CONFIG_PCI_IOV */
+
+extern struct ixgbe_mbx_operations mbx_ops_generic;
+
+#endif /* _IXGBE_MBX_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+static void ixgbe_i2c_start(struct ixgbe_hw *hw);
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
+static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
+static bool ixgbe_get_i2c_data(u32 *i2cctl);
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+
+/**
+ * ixgbe_identify_phy_generic - Get physical layer module
+ * @hw: pointer to hardware structure
+ *
+ * Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 phy_addr;
+ u16 ext_ability = 0;
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+ hw->phy.mdio.prtad = phy_addr;
+ if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
+ ixgbe_get_phy_id(hw);
+ hw->phy.type =
+ ixgbe_get_phy_type_from_id(hw->phy.id);
+
+ if (hw->phy.type == ixgbe_phy_unknown) {
+ hw->phy.ops.read_reg(hw,
+ MDIO_PMA_EXTABLE,
+ MDIO_MMD_PMAPMD,
+ &ext_ability);
+ if (ext_ability &
+ (MDIO_PMA_EXTABLE_10GBT |
+ MDIO_PMA_EXTABLE_1000BT))
+ hw->phy.type =
+ ixgbe_phy_cu_unknown;
+ else
+ hw->phy.type =
+ ixgbe_phy_generic;
+ }
+
+ status = 0;
+ break;
+ }
+ }
+ /* clear value if nothing found */
+ if (status != 0)
+ hw->phy.mdio.prtad = 0;
+ } else {
+ status = 0;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+ u32 status;
+ u16 phy_id_high = 0;
+ u16 phy_id_low = 0;
+
+ status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
+ &phy_id_high);
+
+ if (status == 0) {
+ hw->phy.id = (u32)(phy_id_high << 16);
+ status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
+ &phy_id_low);
+ hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+ hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_type_from_id - Get the phy type
+ * @hw: pointer to hardware structure
+ *
+ **/
+static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+ enum ixgbe_phy_type phy_type;
+
+ switch (phy_id) {
+ case TN1010_PHY_ID:
+ phy_type = ixgbe_phy_tn;
+ break;
+ case X540_PHY_ID:
+ phy_type = ixgbe_phy_aq;
+ break;
+ case QT2022_PHY_ID:
+ phy_type = ixgbe_phy_qt;
+ break;
+ case ATH_PHY_ID:
+ phy_type = ixgbe_phy_nl;
+ break;
+ default:
+ phy_type = ixgbe_phy_unknown;
+ break;
+ }
+
+ return phy_type;
+}
+
+/**
+ * ixgbe_reset_phy_generic - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u16 ctrl = 0;
+ s32 status = 0;
+
+ if (hw->phy.type == ixgbe_phy_unknown)
+ status = ixgbe_identify_phy_generic(hw);
+
+ if (status != 0 || hw->phy.type == ixgbe_phy_none)
+ goto out;
+
+ /* Don't reset PHY if it's shut down due to overtemp. */
+ if (!hw->phy.reset_if_overtemp &&
+ (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
+ goto out;
+
+ /*
+ * Perform soft PHY reset to the PHY_XS.
+ * This will cause a soft reset to the PHY
+ */
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_PHYXS,
+ MDIO_CTRL1_RESET);
+
+ /*
+ * Poll for reset bit to self-clear indicating reset is complete.
+ * Some PHYs could take up to 3 seconds to complete and need about
+ * 1.7 usec delay after the reset is complete.
+ */
+ for (i = 0; i < 30; i++) {
+ msleep(100);
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_PHYXS, &ctrl);
+ if (!(ctrl & MDIO_CTRL1_RESET)) {
+ udelay(2);
+ break;
+ }
+ }
+
+ if (ctrl & MDIO_CTRL1_RESET) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "PHY reset polling failed to complete.\n");
+ }
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ u32 command;
+ u32 i;
+ u32 data;
+ s32 status = 0;
+ u16 gssr;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ gssr = IXGBE_GSSR_PHY1_SM;
+ else
+ gssr = IXGBE_GSSR_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address command did not complete.\n");
+ status = IXGBE_ERR_PHY;
+ }
+
+ if (status == 0) {
+ /*
+ * Address cycle complete, setup and write the read
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.mdio.prtad <<
+ IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY read command didn't complete\n");
+ status = IXGBE_ERR_PHY;
+ } else {
+ /*
+ * Read operation is complete. Get the data
+ * from MSRWD
+ */
+ data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+ data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+ *phy_data = (u16)(data);
+ }
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ u32 command;
+ u32 i;
+ s32 status = 0;
+ u16 gssr;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ gssr = IXGBE_GSSR_PHY1_SM;
+ else
+ gssr = IXGBE_GSSR_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ if (status == 0) {
+ /* Put the data in the MDI single read and write data register*/
+ IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+ /* Setup and write the address cycle command */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle completed.
+ * The MDI Command bit will clear when the operation is
+ * complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
+ status = IXGBE_ERR_PHY;
+ }
+
+ if (status == 0) {
+ /*
+ * Address cycle complete, setup and write the write
+ * command
+ */
+ command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
+ (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+ (hw->phy.mdio.prtad <<
+ IXGBE_MSCA_PHY_ADDR_SHIFT) |
+ (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+ IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+ /*
+ * Check every 10 usec to see if the address cycle
+ * completed. The MDI Command bit will clear when the
+ * operation is complete
+ */
+ for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
+ udelay(10);
+
+ command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+ break;
+ }
+
+ if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+ hw_dbg(hw, "PHY address cmd didn't complete\n");
+ status = IXGBE_ERR_PHY;
+ }
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, gssr);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_generic - Set and restart autoneg
+ * @hw: pointer to hardware structure
+ *
+ * Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~(ADVERTISE_100FULL |
+ ADVERTISE_100HALF);
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= ADVERTISE_100FULL;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ /* Restart PHY autonegotiation and wait for completion */
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, &autoneg_reg);
+
+ autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, autoneg_reg);
+
+ /* Wait for autonegotiation to finish */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ /* Restart PHY autonegotiation and wait for completion */
+ status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+ if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
+ break;
+ }
+ }
+
+ if (time_out == max_time_out) {
+ status = IXGBE_ERR_LINK_SETUP;
+ hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ **/
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+
+ /*
+ * Clear autoneg_advertised and set new values based on input link
+ * speed.
+ */
+ hw->phy.autoneg_advertised = 0;
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+ /* Setup link based on the new speed settings */
+ hw->phy.ops.setup_link(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ *
+ * Determines the link capabilities by reading the AUTOC register.
+ */
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_ERR_LINK_SETUP;
+ u16 speed_ability;
+
+ *speed = 0;
+ *autoneg = true;
+
+ status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
+ &speed_ability);
+
+ if (status == 0) {
+ if (speed_ability & MDIO_SPEED_10G)
+ *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed_ability & MDIO_PMA_SPEED_1000)
+ *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ if (speed_ability & MDIO_PMA_SPEED_100)
+ *speed |= IXGBE_LINK_SPEED_100_FULL;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_check_phy_link_tnx - Determine link and speed status
+ * @hw: pointer to hardware structure
+ *
+ * Reads the VS1 register to determine if link is up and the current speed for
+ * the PHY.
+ **/
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+ bool *link_up)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 phy_link = 0;
+ u16 phy_speed = 0;
+ u16 phy_data = 0;
+
+ /* Initialize speed and link to default case */
+ *link_up = false;
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+ /*
+ * Check current speed and link status of the PHY register.
+ * This is a vendor specific register and may have to
+ * be changed for other copper PHYs.
+ */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ status = hw->phy.ops.read_reg(hw,
+ MDIO_STAT1,
+ MDIO_MMD_VEND1,
+ &phy_data);
+ phy_link = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+ phy_speed = phy_data &
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+ if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+ *link_up = true;
+ if (phy_speed ==
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+ break;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_setup_phy_link_tnx - Set and restart autoneg
+ * @hw: pointer to hardware structure
+ *
+ * Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u32 time_out;
+ u32 max_time_out = 10;
+ u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
+ bool autoneg = false;
+ ixgbe_link_speed speed;
+
+ ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
+
+ if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+ /* Set or unset auto-negotiation 10G advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
+ autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+ /* Set or unset auto-negotiation 1G advertisement */
+ hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
+ autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
+
+ hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_100_FULL) {
+ /* Set or unset auto-negotiation 100M advertisement */
+ hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= ~(ADVERTISE_100FULL |
+ ADVERTISE_100HALF);
+ if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
+ autoneg_reg |= ADVERTISE_100FULL;
+
+ hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
+ MDIO_MMD_AN,
+ autoneg_reg);
+ }
+
+ /* Restart PHY autonegotiation and wait for completion */
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, &autoneg_reg);
+
+ autoneg_reg |= MDIO_AN_CTRL1_RESTART;
+
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1,
+ MDIO_MMD_AN, autoneg_reg);
+
+ /* Wait for autonegotiation to finish */
+ for (time_out = 0; time_out < max_time_out; time_out++) {
+ udelay(10);
+ /* Restart PHY autonegotiation and wait for completion */
+ status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
+ MDIO_MMD_AN,
+ &autoneg_reg);
+
+ autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
+ if (autoneg_reg == MDIO_AN_STAT1_COMPLETE)
+ break;
+ }
+
+ if (time_out == max_time_out) {
+ status = IXGBE_ERR_LINK_SETUP;
+ hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status = 0;
+
+ status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
+ MDIO_MMD_VEND1,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
+ * @hw: pointer to hardware structure
+ * @firmware_version: pointer to the PHY Firmware Version
+ **/
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version)
+{
+ s32 status = 0;
+
+ status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
+ MDIO_MMD_VEND1,
+ firmware_version);
+
+ return status;
+}
+
+/**
+ * ixgbe_reset_phy_nl - Performs a PHY reset
+ * @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
+{
+ u16 phy_offset, control, eword, edata, block_crc;
+ bool end_data = false;
+ u16 list_offset, data_offset;
+ u16 phy_data = 0;
+ s32 ret_val = 0;
+ u32 i;
+
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
+
+ /* reset the PHY and poll for completion */
+ hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+ (phy_data | MDIO_CTRL1_RESET));
+
+ for (i = 0; i < 100; i++) {
+ hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
+ &phy_data);
+ if ((phy_data & MDIO_CTRL1_RESET) == 0)
+ break;
+ usleep_range(10000, 20000);
+ }
+
+ if ((phy_data & MDIO_CTRL1_RESET) != 0) {
+ hw_dbg(hw, "PHY reset did not complete.\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+
+ /* Get init offsets */
+ ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
+ &data_offset);
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
+ data_offset++;
+ while (!end_data) {
+ /*
+ * Read control word from PHY init contents offset
+ */
+ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+ control = (eword & IXGBE_CONTROL_MASK_NL) >>
+ IXGBE_CONTROL_SHIFT_NL;
+ edata = eword & IXGBE_DATA_MASK_NL;
+ switch (control) {
+ case IXGBE_DELAY_NL:
+ data_offset++;
+ hw_dbg(hw, "DELAY: %d MS\n", edata);
+ usleep_range(edata * 1000, edata * 2000);
+ break;
+ case IXGBE_DATA_NL:
+ hw_dbg(hw, "DATA:\n");
+ data_offset++;
+ hw->eeprom.ops.read(hw, data_offset++,
+ &phy_offset);
+ for (i = 0; i < edata; i++) {
+ hw->eeprom.ops.read(hw, data_offset, &eword);
+ hw->phy.ops.write_reg(hw, phy_offset,
+ MDIO_MMD_PMAPMD, eword);
+ hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
+ phy_offset);
+ data_offset++;
+ phy_offset++;
+ }
+ break;
+ case IXGBE_CONTROL_NL:
+ data_offset++;
+ hw_dbg(hw, "CONTROL:\n");
+ if (edata == IXGBE_CONTROL_EOL_NL) {
+ hw_dbg(hw, "EOL\n");
+ end_data = true;
+ } else if (edata == IXGBE_CONTROL_SOL_NL) {
+ hw_dbg(hw, "SOL\n");
+ } else {
+ hw_dbg(hw, "Bad control value\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ break;
+ default:
+ hw_dbg(hw, "Bad control type\n");
+ ret_val = IXGBE_ERR_PHY;
+ goto out;
+ }
+ }
+
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_identify_sfp_module_generic - Identifies SFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the SFP module and assigns appropriate PHY type.
+ **/
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u8 cable_tech = 0;
+ u8 cable_spec = 0;
+ u16 enforce_sfp = 0;
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ /* LAN ID is needed for sfp_type determination */
+ hw->mac.ops.set_lan_id(hw);
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES,
+ &comp_codes_1g);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES,
+ &comp_codes_10g);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_CABLE_TECHNOLOGY,
+ &cable_tech);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ /* ID Module
+ * =========
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CORE0 - 82599-specific
+ * 4 SFP_DA_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
+ * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
+ * 9 SFP_1g_cu_CORE0 - 82599-specific
+ * 10 SFP_1g_cu_CORE1 - 82599-specific
+ */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_sr;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ hw->phy.sfp_type = ixgbe_sfp_type_lr;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ } else if (hw->mac.type == ixgbe_mac_82599EB) {
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_cu_core1;
+ } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
+ hw->phy.ops.read_i2c_eeprom(
+ hw, IXGBE_SFF_CABLE_SPEC_COMP,
+ &cable_spec);
+ if (cable_spec &
+ IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_unknown;
+ }
+ } else if (comp_codes_10g &
+ (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_srlr_core1;
+ } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_1g_cu_core1;
+ } else {
+ hw->phy.sfp_type = ixgbe_sfp_type_unknown;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = true;
+
+ /* Determine if the SFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = false;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = true;
+
+ /* Determine PHY vendor */
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = identifier;
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status == IXGBE_ERR_SWFW_SYNC ||
+ status == IXGBE_ERR_I2C ||
+ status == IXGBE_ERR_SFP_NOT_PRESENT)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ switch (vendor_oui) {
+ case IXGBE_SFF_VENDOR_OUI_TYCO:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_tyco;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_FTL:
+ if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type = ixgbe_phy_sfp_ftl_active;
+ else
+ hw->phy.type = ixgbe_phy_sfp_ftl;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_AVAGO:
+ hw->phy.type = ixgbe_phy_sfp_avago;
+ break;
+ case IXGBE_SFF_VENDOR_OUI_INTEL:
+ hw->phy.type = ixgbe_phy_sfp_intel;
+ break;
+ default:
+ if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_passive_unknown;
+ else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
+ hw->phy.type =
+ ixgbe_phy_sfp_active_unknown;
+ else
+ hw->phy.type = ixgbe_phy_sfp_unknown;
+ break;
+ }
+ }
+
+ /* Allow any DA cable vendor */
+ if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
+ IXGBE_SFF_DA_ACTIVE_CABLE)) {
+ status = 0;
+ goto out;
+ }
+
+ /* Verify supported 1G SFP modules */
+ if (comp_codes_10g == 0 &&
+ !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
+ hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ /* Anything else 82598-based is supported */
+ if (hw->mac.type == ixgbe_mac_82598EB) {
+ status = 0;
+ goto out;
+ }
+
+ hw->mac.ops.get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
+ !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
+ (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_sfp_intel) {
+ status = 0;
+ } else {
+ hw_dbg(hw, "SFP+ module not supported\n");
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ } else {
+ status = 0;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ if (hw->phy.type != ixgbe_phy_nl) {
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+ }
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+/**
+ * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
+ * @hw: pointer to hardware structure
+ * @list_offset: offset to the SFP ID list
+ * @data_offset: offset to the SFP data block
+ *
+ * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
+ * so it returns the offsets to the phy init sequence block.
+ **/
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset)
+{
+ u16 sfp_id;
+ u16 sfp_type = hw->phy.sfp_type;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+
+ if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
+ (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+
+ /*
+ * Limiting active cables and 1G Phys must be initialized as
+ * SR modules
+ */
+ if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core0)
+ sfp_type = ixgbe_sfp_type_srlr_core0;
+ else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
+ sfp_type == ixgbe_sfp_type_1g_cu_core1)
+ sfp_type = ixgbe_sfp_type_srlr_core1;
+
+ /* Read offset to PHY init contents */
+ hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
+
+ if ((!*list_offset) || (*list_offset == 0xFFFF))
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+
+ /* Shift offset to first ID word */
+ (*list_offset)++;
+
+ /*
+ * Find the matching SFP ID in the EEPROM
+ * and program the init sequence
+ */
+ hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
+
+ while (sfp_id != IXGBE_PHY_INIT_END_NL) {
+ if (sfp_id == sfp_type) {
+ (*list_offset)++;
+ hw->eeprom.ops.read(hw, *list_offset, data_offset);
+ if ((!*data_offset) || (*data_offset == 0xFFFF)) {
+ hw_dbg(hw, "SFP+ module not supported\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ } else {
+ break;
+ }
+ } else {
+ (*list_offset) += 2;
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ return IXGBE_ERR_PHY;
+ }
+ }
+
+ if (sfp_id == IXGBE_PHY_INIT_END_NL) {
+ hw_dbg(hw, "No matching SFP+ module found\n");
+ return IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to read
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data)
+{
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: EEPROM byte offset to write
+ * @eeprom_data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface.
+ **/
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data)
+{
+ return hw->phy.ops.write_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR,
+ eeprom_data);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified deivce address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ s32 status = 0;
+ u32 max_retry = 10;
+ u32 retry = 0;
+ u16 swfw_mask = 0;
+ bool nack = 1;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ swfw_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ swfw_mask = IXGBE_GSSR_PHY0_SM;
+
+ do {
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
+ status = IXGBE_ERR_SWFW_SYNC;
+ goto read_byte_out;
+ }
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and write indication */
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_start(hw);
+
+ /* Device Address and read indication */
+ status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_in_i2c_byte(hw, data);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_bit(hw, nack);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ break;
+
+fail:
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ msleep(100);
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ hw_dbg(hw, "I2C byte read error - Retrying.\n");
+ else
+ hw_dbg(hw, "I2C byte read error.\n");
+
+ } while (retry < max_retry);
+
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+read_byte_out:
+ return status;
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ s32 status = 0;
+ u32 max_retry = 1;
+ u32 retry = 0;
+ u16 swfw_mask = 0;
+
+ if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+ swfw_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ swfw_mask = IXGBE_GSSR_PHY0_SM;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
+ status = IXGBE_ERR_SWFW_SYNC;
+ goto write_byte_out;
+ }
+
+ do {
+ ixgbe_i2c_start(hw);
+
+ status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_clock_out_i2c_byte(hw, data);
+ if (status != 0)
+ goto fail;
+
+ status = ixgbe_get_i2c_ack(hw);
+ if (status != 0)
+ goto fail;
+
+ ixgbe_i2c_stop(hw);
+ break;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ retry++;
+ if (retry < max_retry)
+ hw_dbg(hw, "I2C byte write error - Retrying.\n");
+ else
+ hw_dbg(hw, "I2C byte write error.\n");
+ } while (retry < max_retry);
+
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+
+write_byte_out:
+ return status;
+}
+
+/**
+ * ixgbe_i2c_start - Sets I2C start condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C start condition (High -> Low on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_start(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ /* Start condition must begin with data and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for start condition (4.7us) */
+ udelay(IXGBE_I2C_T_SU_STA);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+
+ /* Hold time for start condition (4us) */
+ udelay(IXGBE_I2C_T_HD_STA);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+}
+
+/**
+ * ixgbe_i2c_stop - Sets I2C stop condition
+ * @hw: pointer to hardware structure
+ *
+ * Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ **/
+static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ /* Stop condition must begin with data low and clock high */
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Setup time for stop condition (4us) */
+ udelay(IXGBE_I2C_T_SU_STO);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ /* bus free time between stop and start (4.7us)*/
+ udelay(IXGBE_I2C_T_BUF);
+}
+
+/**
+ * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte to clock in
+ *
+ * Clocks in one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
+{
+ s32 status = 0;
+ s32 i;
+ bool bit = 0;
+
+ for (i = 7; i >= 0; i--) {
+ status = ixgbe_clock_in_i2c_bit(hw, &bit);
+ *data |= bit << i;
+
+ if (status != 0)
+ break;
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
+ * @hw: pointer to hardware structure
+ * @data: data byte clocked out
+ *
+ * Clocks out one byte data via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
+{
+ s32 status = 0;
+ s32 i;
+ u32 i2cctl;
+ bool bit = 0;
+
+ for (i = 7; i >= 0; i--) {
+ bit = (data >> i) & 0x1;
+ status = ixgbe_clock_out_i2c_bit(hw, bit);
+
+ if (status != 0)
+ break;
+ }
+
+ /* Release SDA line (set high) */
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ i2cctl |= IXGBE_I2C_DATA_OUT;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl);
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_ack - Polls for I2C ACK
+ * @hw: pointer to hardware structure
+ *
+ * Clocks in/out one bit via I2C data/clock
+ **/
+static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u32 i = 0;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 timeout = 10;
+ bool ack = 1;
+
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ if (status != 0)
+ goto out;
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ /* Poll for ACK. Note that ACK in I2C spec is
+ * transition from 1 to 0 */
+ for (i = 0; i < timeout; i++) {
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ ack = ixgbe_get_i2c_data(&i2cctl);
+
+ udelay(1);
+ if (ack == 0)
+ break;
+ }
+
+ if (ack == 1) {
+ hw_dbg(hw, "I2C ack was not received.\n");
+ status = IXGBE_ERR_I2C;
+ }
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+out:
+ return status;
+}
+
+/**
+ * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: read data value
+ *
+ * Clocks in one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ *data = ixgbe_get_i2c_data(&i2cctl);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us */
+ udelay(IXGBE_I2C_T_LOW);
+
+ return status;
+}
+
+/**
+ * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
+ * @hw: pointer to hardware structure
+ * @data: data value to write
+ *
+ * Clocks out one bit via I2C data/clock
+ **/
+static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
+{
+ s32 status;
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+
+ status = ixgbe_set_i2c_data(hw, &i2cctl, data);
+ if (status == 0) {
+ status = ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Minimum high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Minimum low period of clock is 4.7 us.
+ * This also takes care of the data hold time.
+ */
+ udelay(IXGBE_I2C_T_LOW);
+ } else {
+ status = IXGBE_ERR_I2C;
+ hw_dbg(hw, "I2C data was not set to %X\n", data);
+ }
+
+ return status;
+}
+/**
+ * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Raises the I2C clock line '0'->'1'
+ **/
+static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+ s32 status = 0;
+
+ *i2cctl |= IXGBE_I2C_CLK_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* SCL rise time (1000ns) */
+ udelay(IXGBE_I2C_T_RISE);
+
+ return status;
+}
+
+/**
+ * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Lowers the I2C clock line '1'->'0'
+ **/
+static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
+{
+
+ *i2cctl &= ~IXGBE_I2C_CLK_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* SCL fall time (300ns) */
+ udelay(IXGBE_I2C_T_FALL);
+}
+
+/**
+ * ixgbe_set_i2c_data - Sets the I2C data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ * @data: I2C data value (0 or 1) to set
+ *
+ * Sets the I2C data bit
+ **/
+static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
+{
+ s32 status = 0;
+
+ if (data)
+ *i2cctl |= IXGBE_I2C_DATA_OUT;
+ else
+ *i2cctl &= ~IXGBE_I2C_DATA_OUT;
+
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
+ udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+
+ /* Verify data was set correctly */
+ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ if (data != ixgbe_get_i2c_data(i2cctl)) {
+ status = IXGBE_ERR_I2C;
+ hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_get_i2c_data - Reads the I2C SDA data bit
+ * @hw: pointer to hardware structure
+ * @i2cctl: Current value of I2CCTL register
+ *
+ * Returns the I2C data bit value
+ **/
+static bool ixgbe_get_i2c_data(u32 *i2cctl)
+{
+ bool data;
+
+ if (*i2cctl & IXGBE_I2C_DATA_IN)
+ data = 1;
+ else
+ data = 0;
+
+ return data;
+}
+
+/**
+ * ixgbe_i2c_bus_clear - Clears the I2C bus
+ * @hw: pointer to hardware structure
+ *
+ * Clears the I2C bus by sending nine clock pulses.
+ * Used when data line is stuck low.
+ **/
+static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
+{
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i;
+
+ ixgbe_i2c_start(hw);
+
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
+
+ for (i = 0; i < 9; i++) {
+ ixgbe_raise_i2c_clk(hw, &i2cctl);
+
+ /* Min high period of clock is 4us */
+ udelay(IXGBE_I2C_T_HIGH);
+
+ ixgbe_lower_i2c_clk(hw, &i2cctl);
+
+ /* Min low period of clock is 4.7us*/
+ udelay(IXGBE_I2C_T_LOW);
+ }
+
+ ixgbe_i2c_start(hw);
+
+ /* Put the i2c bus back to default state */
+ ixgbe_i2c_stop(hw);
+}
+
+/**
+ * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
+ * @hw: pointer to hardware structure
+ *
+ * Checks if the LASI temp alarm status was triggered due to overtemp
+ **/
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
+{
+ s32 status = 0;
+ u16 phy_data = 0;
+
+ if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
+ goto out;
+
+ /* Check that the LASI temp alarm status was triggered */
+ hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
+ MDIO_MMD_PMAPMD, &phy_data);
+
+ if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
+ goto out;
+
+ status = IXGBE_ERR_OVERTEMP;
+out:
+ return status;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_PHY_H_
+#define _IXGBE_PHY_H_
+
+#include "ixgbe_type.h"
+#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
+
+/* EEPROM byte offsets */
+#define IXGBE_SFF_IDENTIFIER 0x0
+#define IXGBE_SFF_IDENTIFIER_SFP 0x3
+#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
+#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
+#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
+#define IXGBE_SFF_1GBE_COMP_CODES 0x6
+#define IXGBE_SFF_10GBE_COMP_CODES 0x3
+#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
+#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
+
+/* Bitmasks */
+#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
+#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8
+#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4
+#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
+#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
+#define IXGBE_SFF_1GBASET_CAPABLE 0x8
+#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
+#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
+#define IXGBE_I2C_EEPROM_READ_MASK 0x100
+#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
+#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
+#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
+#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
+#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
+
+/* Flow control defines */
+#define IXGBE_TAF_SYM_PAUSE 0x400
+#define IXGBE_TAF_ASM_PAUSE 0x800
+
+/* Bit-shift macros */
+#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
+#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
+#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
+
+/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
+#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
+#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
+#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
+#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
+
+/* I2C SDA and SCL timing parameters for standard mode */
+#define IXGBE_I2C_T_HD_STA 4
+#define IXGBE_I2C_T_LOW 5
+#define IXGBE_I2C_T_HIGH 4
+#define IXGBE_I2C_T_SU_STA 5
+#define IXGBE_I2C_T_HD_DATA 5
+#define IXGBE_I2C_T_SU_DATA 1
+#define IXGBE_I2C_T_RISE 1
+#define IXGBE_I2C_T_FALL 1
+#define IXGBE_I2C_T_SU_STO 4
+#define IXGBE_I2C_T_BUF 5
+
+#define IXGBE_TN_LASI_STATUS_REG 0x9005
+#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
+
+s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data);
+s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed,
+ bool autoneg,
+ bool autoneg_wait_to_complete);
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg);
+
+/* PHY specific */
+s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up);
+s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
+s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
+ u16 *firmware_version);
+
+s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
+s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
+ u16 *list_offset,
+ u16 *data_offset);
+s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data);
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data);
+s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *eeprom_data);
+s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 eeprom_data);
+#endif /* _IXGBE_PHY_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#ifdef NETIF_F_HW_VLAN_TX
+#include <linux/if_vlan.h>
+#endif
+
+#include "ixgbe.h"
+
+#include "ixgbe_sriov.h"
+
+static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
+ int entries, u16 *hash_list, u32 vf)
+{
+ struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i;
+ u32 vector_bit;
+ u32 vector_reg;
+ u32 mta_reg;
+
+ /* only so many hash values supported */
+ entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
+
+ /*
+ * salt away the number of multi cast addresses assigned
+ * to this VF for later use to restore when the PF multi cast
+ * list changes
+ */
+ vfinfo->num_vf_mc_hashes = entries;
+
+ /*
+ * VFs are limited to using the MTA hash table for their multicast
+ * addresses
+ */
+ for (i = 0; i < entries; i++) {
+ vfinfo->vf_mc_hashes[i] = hash_list[i];
+ }
+
+ for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
+ vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
+ vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
+ mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+ mta_reg |= (1 << vector_bit);
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+ }
+
+ return 0;
+}
+
+static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct list_head *pos;
+ struct vf_macvlans *entry;
+
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->free == false)
+ hw->mac.ops.set_rar(hw, entry->rar_entry,
+ entry->vf_macvlan,
+ entry->vf, IXGBE_RAH_AV);
+ }
+}
+
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct vf_data_storage *vfinfo;
+ int i, j;
+ u32 vector_bit;
+ u32 vector_reg;
+ u32 mta_reg;
+
+ for (i = 0; i < adapter->num_vfs; i++) {
+ vfinfo = &adapter->vfinfo[i];
+ for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
+ hw->addr_ctrl.mta_in_use++;
+ vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
+ vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
+ mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+ mta_reg |= (1 << vector_bit);
+ IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+ }
+ }
+
+ /* Restore any VF macvlans */
+ ixgbe_restore_vf_macvlans(adapter);
+}
+
+static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
+ u32 vf)
+{
+ return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
+}
+
+static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int new_mtu = msgbuf[1];
+ u32 max_frs;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+
+ /* Only X540 supports jumbo frames in IOV mode */
+ if (adapter->hw.mac.type != ixgbe_mac_X540)
+ return;
+
+ /* MTU < 68 is an error and causes problems on some kernels */
+ if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) {
+ e_err(drv, "VF mtu %d out of range\n", new_mtu);
+ return;
+ }
+
+ max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) &
+ IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT;
+ if (max_frs < new_mtu) {
+ max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT;
+ IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
+ }
+
+ e_info(hw, "VF requests change max MTU to %d\n", new_mtu);
+}
+
+static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
+{
+ u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
+ vmolr |= (IXGBE_VMOLR_ROMPE |
+ IXGBE_VMOLR_BAM);
+ if (aupe)
+ vmolr |= IXGBE_VMOLR_AUPE;
+ else
+ vmolr &= ~IXGBE_VMOLR_AUPE;
+ IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
+}
+
+static void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, u32 vid, u32 vf)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if (vid)
+ IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf),
+ (vid | IXGBE_VMVIR_VLANA_DEFAULT));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
+}
+
+static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int rar_entry = hw->mac.num_rar_entries - (vf + 1);
+
+ /* reset offloads to defaults */
+ if (adapter->vfinfo[vf].pf_vlan) {
+ ixgbe_set_vf_vlan(adapter, true,
+ adapter->vfinfo[vf].pf_vlan, vf);
+ ixgbe_set_vmvir(adapter,
+ (adapter->vfinfo[vf].pf_vlan |
+ (adapter->vfinfo[vf].pf_qos <<
+ VLAN_PRIO_SHIFT)), vf);
+ ixgbe_set_vmolr(hw, vf, false);
+ } else {
+ ixgbe_set_vmvir(adapter, 0, vf);
+ ixgbe_set_vmolr(hw, vf, true);
+ }
+
+ /* reset multicast table array for vf */
+ adapter->vfinfo[vf].num_vf_mc_hashes = 0;
+
+ /* Flush and reset the mta with the new values */
+ ixgbe_set_rx_mode(adapter->netdev);
+
+ hw->mac.ops.clear_rar(hw, rar_entry);
+}
+
+static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
+ int vf, unsigned char *mac_addr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int rar_entry = hw->mac.num_rar_entries - (vf + 1);
+
+ memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, 6);
+ hw->mac.ops.set_rar(hw, rar_entry, mac_addr, vf, IXGBE_RAH_AV);
+
+ return 0;
+}
+
+static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
+ int vf, int index, unsigned char *mac_addr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct list_head *pos;
+ struct vf_macvlans *entry;
+
+ if (index <= 1) {
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->vf == vf) {
+ entry->vf = -1;
+ entry->free = true;
+ entry->is_macvlan = false;
+ hw->mac.ops.clear_rar(hw, entry->rar_entry);
+ }
+ }
+ }
+
+ /*
+ * If index was zero then we were asked to clear the uc list
+ * for the VF. We're done.
+ */
+ if (!index)
+ return 0;
+
+ entry = NULL;
+
+ list_for_each(pos, &adapter->vf_mvs.l) {
+ entry = list_entry(pos, struct vf_macvlans, l);
+ if (entry->free)
+ break;
+ }
+
+ /*
+ * If we traversed the entire list and didn't find a free entry
+ * then we're out of space on the RAR table. Also entry may
+ * be NULL because the original memory allocation for the list
+ * failed, which is not fatal but does mean we can't support
+ * VF requests for MACVLAN because we couldn't allocate
+ * memory for the list management required.
+ */
+ if (!entry || !entry->free)
+ return -ENOSPC;
+
+ entry->free = false;
+ entry->is_macvlan = true;
+ entry->vf = vf;
+ memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
+
+ hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV);
+
+ return 0;
+}
+
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
+{
+ unsigned char vf_mac_addr[6];
+ struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
+ unsigned int vfn = (event_mask & 0x3f);
+
+ bool enable = ((event_mask & 0x10000000U) != 0);
+
+ if (enable) {
+ random_ether_addr(vf_mac_addr);
+ e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
+ vfn, vf_mac_addr);
+ /*
+ * Store away the VF "permananet" MAC address, it will ask
+ * for it later.
+ */
+ memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
+ }
+
+ return 0;
+}
+
+static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 reg;
+ u32 reg_offset, vf_shift;
+
+ vf_shift = vf % 32;
+ reg_offset = vf / 32;
+
+ /* enable transmit and receive for vf */
+ reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
+ reg |= (reg | (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
+
+ reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
+ reg |= (reg | (1 << vf_shift));
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
+
+ /* Enable counting of spoofed packets in the SSVPC register */
+ reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
+ reg |= (1 << vf_shift);
+ IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
+
+ ixgbe_vf_reset_event(adapter, vf);
+}
+
+static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+ u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ struct ixgbe_hw *hw = &adapter->hw;
+ s32 retval;
+ int entries;
+ u16 *hash_list;
+ int add, vid, index;
+ u8 *new_mac;
+
+ retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
+
+ if (retval)
+ pr_err("Error receiving message from VF\n");
+
+ /* this is a message we already processed, do nothing */
+ if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
+ return retval;
+
+ /*
+ * until the vf completes a virtual function reset it should not be
+ * allowed to start any configuration.
+ */
+
+ if (msgbuf[0] == IXGBE_VF_RESET) {
+ unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
+ new_mac = (u8 *)(&msgbuf[1]);
+ e_info(probe, "VF Reset msg received from vf %d\n", vf);
+ adapter->vfinfo[vf].clear_to_send = false;
+ ixgbe_vf_reset_msg(adapter, vf);
+ adapter->vfinfo[vf].clear_to_send = true;
+
+ if (is_valid_ether_addr(new_mac) &&
+ !adapter->vfinfo[vf].pf_set_mac)
+ ixgbe_set_vf_mac(adapter, vf, vf_mac);
+ else
+ ixgbe_set_vf_mac(adapter,
+ vf, adapter->vfinfo[vf].vf_mac_addresses);
+
+ /* reply to reset with ack and vf mac address */
+ msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
+ memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ /*
+ * Piggyback the multicast filter type so VF can compute the
+ * correct vectors
+ */
+ msgbuf[3] = hw->mac.mc_filter_type;
+ ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
+
+ return retval;
+ }
+
+ if (!adapter->vfinfo[vf].clear_to_send) {
+ msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+ ixgbe_write_mbx(hw, msgbuf, 1, vf);
+ return retval;
+ }
+
+ switch ((msgbuf[0] & 0xFFFF)) {
+ case IXGBE_VF_SET_MAC_ADDR:
+ new_mac = ((u8 *)(&msgbuf[1]));
+ if (is_valid_ether_addr(new_mac) &&
+ !adapter->vfinfo[vf].pf_set_mac) {
+ ixgbe_set_vf_mac(adapter, vf, new_mac);
+ } else if (memcmp(adapter->vfinfo[vf].vf_mac_addresses,
+ new_mac, ETH_ALEN)) {
+ e_warn(drv, "VF %d attempted to override "
+ "administratively set MAC address\nReload "
+ "the VF driver to resume operations\n", vf);
+ retval = -1;
+ }
+ break;
+ case IXGBE_VF_SET_MULTICAST:
+ entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
+ >> IXGBE_VT_MSGINFO_SHIFT;
+ hash_list = (u16 *)&msgbuf[1];
+ retval = ixgbe_set_vf_multicasts(adapter, entries,
+ hash_list, vf);
+ break;
+ case IXGBE_VF_SET_LPE:
+ ixgbe_set_vf_lpe(adapter, msgbuf);
+ break;
+ case IXGBE_VF_SET_VLAN:
+ add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
+ >> IXGBE_VT_MSGINFO_SHIFT;
+ vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
+ if (adapter->vfinfo[vf].pf_vlan) {
+ e_warn(drv, "VF %d attempted to override "
+ "administratively set VLAN configuration\n"
+ "Reload the VF driver to resume operations\n",
+ vf);
+ retval = -1;
+ } else {
+ retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
+ }
+ break;
+ case IXGBE_VF_SET_MACVLAN:
+ index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
+ IXGBE_VT_MSGINFO_SHIFT;
+ /*
+ * If the VF is allowed to set MAC filters then turn off
+ * anti-spoofing to avoid false positives. An index
+ * greater than 0 will indicate the VF is setting a
+ * macvlan MAC filter.
+ */
+ if (index > 0 && adapter->antispoofing_enabled) {
+ hw->mac.ops.set_mac_anti_spoofing(hw, false,
+ adapter->num_vfs);
+ hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
+ adapter->antispoofing_enabled = false;
+ }
+ retval = ixgbe_set_vf_macvlan(adapter, vf, index,
+ (unsigned char *)(&msgbuf[1]));
+ break;
+ default:
+ e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
+ retval = IXGBE_ERR_MBX;
+ break;
+ }
+
+ /* notify the VF of the results of what it sent us */
+ if (retval)
+ msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
+ else
+ msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
+
+ msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
+
+ ixgbe_write_mbx(hw, msgbuf, 1, vf);
+
+ return retval;
+}
+
+static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 msg = IXGBE_VT_MSGTYPE_NACK;
+
+ /* if device isn't clear to send it shouldn't be reading either */
+ if (!adapter->vfinfo[vf].clear_to_send)
+ ixgbe_write_mbx(hw, &msg, 1, vf);
+}
+
+void ixgbe_msg_task(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vf;
+
+ for (vf = 0; vf < adapter->num_vfs; vf++) {
+ /* process any reset requests */
+ if (!ixgbe_check_for_rst(hw, vf))
+ ixgbe_vf_reset_event(adapter, vf);
+
+ /* process any messages pending */
+ if (!ixgbe_check_for_msg(hw, vf))
+ ixgbe_rcv_msg_from_vf(adapter, vf);
+
+ /* process any acks */
+ if (!ixgbe_check_for_ack(hw, vf))
+ ixgbe_rcv_ack_from_vf(adapter, vf);
+ }
+}
+
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* disable transmit and receive for all vfs */
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
+}
+
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 ping;
+ int i;
+
+ for (i = 0 ; i < adapter->num_vfs; i++) {
+ ping = IXGBE_PF_CONTROL_MSG;
+ if (adapter->vfinfo[i].clear_to_send)
+ ping |= IXGBE_VT_MSGTYPE_CTS;
+ ixgbe_write_mbx(hw, &ping, 1, i);
+ }
+}
+
+int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
+ return -EINVAL;
+ adapter->vfinfo[vf].pf_set_mac = true;
+ dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
+ dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
+ " change effective.");
+ if (test_bit(__IXGBE_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
+ " but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
+ " attempting to use the VF device.\n");
+ }
+ return ixgbe_set_vf_mac(adapter, vf, mac);
+}
+
+int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
+{
+ int err = 0;
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
+ return -EINVAL;
+ if (vlan || qos) {
+ err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
+ if (err)
+ goto out;
+ ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
+ ixgbe_set_vmolr(hw, vf, false);
+ if (adapter->antispoofing_enabled)
+ hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
+ adapter->vfinfo[vf].pf_vlan = vlan;
+ adapter->vfinfo[vf].pf_qos = qos;
+ dev_info(&adapter->pdev->dev,
+ "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
+ if (test_bit(__IXGBE_DOWN, &adapter->state)) {
+ dev_warn(&adapter->pdev->dev,
+ "The VF VLAN has been set,"
+ " but the PF device is not up.\n");
+ dev_warn(&adapter->pdev->dev,
+ "Bring the PF device up before"
+ " attempting to use the VF device.\n");
+ }
+ } else {
+ err = ixgbe_set_vf_vlan(adapter, false,
+ adapter->vfinfo[vf].pf_vlan, vf);
+ ixgbe_set_vmvir(adapter, vlan, vf);
+ ixgbe_set_vmolr(hw, vf, true);
+ hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
+ adapter->vfinfo[vf].pf_vlan = 0;
+ adapter->vfinfo[vf].pf_qos = 0;
+ }
+out:
+ return err;
+}
+
+static int ixgbe_link_mbps(int internal_link_speed)
+{
+ switch (internal_link_speed) {
+ case IXGBE_LINK_SPEED_100_FULL:
+ return 100;
+ case IXGBE_LINK_SPEED_1GB_FULL:
+ return 1000;
+ case IXGBE_LINK_SPEED_10GB_FULL:
+ return 10000;
+ default:
+ return 0;
+ }
+}
+
+static void ixgbe_set_vf_rate_limit(struct ixgbe_hw *hw, int vf, int tx_rate,
+ int link_speed)
+{
+ int rf_dec, rf_int;
+ u32 bcnrc_val;
+
+ if (tx_rate != 0) {
+ /* Calculate the rate factor values to set */
+ rf_int = link_speed / tx_rate;
+ rf_dec = (link_speed - (rf_int * tx_rate));
+ rf_dec = (rf_dec * (1<<IXGBE_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
+
+ bcnrc_val = IXGBE_RTTBCNRC_RS_ENA;
+ bcnrc_val |= ((rf_int<<IXGBE_RTTBCNRC_RF_INT_SHIFT) &
+ IXGBE_RTTBCNRC_RF_INT_MASK);
+ bcnrc_val |= (rf_dec & IXGBE_RTTBCNRC_RF_DEC_MASK);
+ } else {
+ bcnrc_val = 0;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, 2*vf); /* vf Y uses queue 2*Y */
+ /*
+ * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
+ * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
+ * and 0x004 otherwise.
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
+ break;
+ case ixgbe_mac_X540:
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
+ break;
+ default:
+ break;
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
+}
+
+void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
+{
+ int actual_link_speed, i;
+ bool reset_rate = false;
+
+ /* VF Tx rate limit was not set */
+ if (adapter->vf_rate_link_speed == 0)
+ return;
+
+ actual_link_speed = ixgbe_link_mbps(adapter->link_speed);
+ if (actual_link_speed != adapter->vf_rate_link_speed) {
+ reset_rate = true;
+ adapter->vf_rate_link_speed = 0;
+ dev_info(&adapter->pdev->dev,
+ "Link speed has been changed. VF Transmit rate "
+ "is disabled\n");
+ }
+
+ for (i = 0; i < adapter->num_vfs; i++) {
+ if (reset_rate)
+ adapter->vfinfo[i].tx_rate = 0;
+
+ ixgbe_set_vf_rate_limit(&adapter->hw, i,
+ adapter->vfinfo[i].tx_rate,
+ actual_link_speed);
+ }
+}
+
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int actual_link_speed;
+
+ actual_link_speed = ixgbe_link_mbps(adapter->link_speed);
+ if ((vf >= adapter->num_vfs) || (!adapter->link_up) ||
+ (tx_rate > actual_link_speed) || (actual_link_speed != 10000) ||
+ ((tx_rate != 0) && (tx_rate <= 10)))
+ /* rate limit cannot be set to 10Mb or less in 10Gb adapters */
+ return -EINVAL;
+
+ adapter->vf_rate_link_speed = actual_link_speed;
+ adapter->vfinfo[vf].tx_rate = (u16)tx_rate;
+ ixgbe_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
+
+ return 0;
+}
+
+int ixgbe_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi)
+{
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+ if (vf >= adapter->num_vfs)
+ return -EINVAL;
+ ivi->vf = vf;
+ memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
+ ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
+ ivi->vlan = adapter->vfinfo[vf].pf_vlan;
+ ivi->qos = adapter->vfinfo[vf].pf_qos;
+ return 0;
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_SRIOV_H_
+#define _IXGBE_SRIOV_H_
+
+void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter);
+void ixgbe_msg_task(struct ixgbe_adapter *adapter);
+int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
+void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter);
+void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
+void ixgbe_dump_registers(struct ixgbe_adapter *adapter);
+int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
+int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
+ u8 qos);
+int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
+int ixgbe_ndo_get_vf_config(struct net_device *netdev,
+ int vf, struct ifla_vf_info *ivi);
+void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
+
+#endif /* _IXGBE_SRIOV_H_ */
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_TYPE_H_
+#define _IXGBE_TYPE_H_
+
+#include <linux/types.h>
+#include <linux/mdio.h>
+#include <linux/netdevice.h>
+
+/* Vendor ID */
+#define IXGBE_INTEL_VENDOR_ID 0x8086
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82598 0x10B6
+#define IXGBE_DEV_ID_82598_BX 0x1508
+#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
+#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
+#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
+#define IXGBE_DEV_ID_82598AT 0x10C8
+#define IXGBE_DEV_ID_82598AT2 0x150B
+#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
+#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
+#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
+#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
+#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
+#define IXGBE_DEV_ID_82599_KX4 0x10F7
+#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514
+#define IXGBE_DEV_ID_82599_KR 0x1517
+#define IXGBE_DEV_ID_82599_T3_LOM 0x151C
+#define IXGBE_DEV_ID_82599_CX4 0x10F9
+#define IXGBE_DEV_ID_82599_SFP 0x10FB
+#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152a
+#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529
+#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
+#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
+#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D
+#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
+#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
+#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C
+#define IXGBE_DEV_ID_82599_LS 0x154F
+#define IXGBE_DEV_ID_X540T 0x1528
+
+/* General Registers */
+#define IXGBE_CTRL 0x00000
+#define IXGBE_STATUS 0x00008
+#define IXGBE_CTRL_EXT 0x00018
+#define IXGBE_ESDP 0x00020
+#define IXGBE_EODSDP 0x00028
+#define IXGBE_I2CCTL 0x00028
+#define IXGBE_LEDCTL 0x00200
+#define IXGBE_FRTIMER 0x00048
+#define IXGBE_TCPTIMER 0x0004C
+#define IXGBE_CORESPARE 0x00600
+#define IXGBE_EXVET 0x05078
+
+/* NVM Registers */
+#define IXGBE_EEC 0x10010
+#define IXGBE_EERD 0x10014
+#define IXGBE_EEWR 0x10018
+#define IXGBE_FLA 0x1001C
+#define IXGBE_EEMNGCTL 0x10110
+#define IXGBE_EEMNGDATA 0x10114
+#define IXGBE_FLMNGCTL 0x10118
+#define IXGBE_FLMNGDATA 0x1011C
+#define IXGBE_FLMNGCNT 0x10120
+#define IXGBE_FLOP 0x1013C
+#define IXGBE_GRC 0x10200
+
+/* General Receive Control */
+#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */
+#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */
+
+#define IXGBE_VPDDIAG0 0x10204
+#define IXGBE_VPDDIAG1 0x10208
+
+/* I2CCTL Bit Masks */
+#define IXGBE_I2C_CLK_IN 0x00000001
+#define IXGBE_I2C_CLK_OUT 0x00000002
+#define IXGBE_I2C_DATA_IN 0x00000004
+#define IXGBE_I2C_DATA_OUT 0x00000008
+
+/* Interrupt Registers */
+#define IXGBE_EICR 0x00800
+#define IXGBE_EICS 0x00808
+#define IXGBE_EIMS 0x00880
+#define IXGBE_EIMC 0x00888
+#define IXGBE_EIAC 0x00810
+#define IXGBE_EIAM 0x00890
+#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4)
+#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4)
+#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4)
+#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4)
+/*
+ * 82598 EITR is 16 bits but set the limits based on the max
+ * supported by all ixgbe hardware. 82599 EITR is only 12 bits,
+ * with the lower 3 always zero.
+ */
+#define IXGBE_MAX_INT_RATE 488281
+#define IXGBE_MIN_INT_RATE 956
+#define IXGBE_MAX_EITR 0x00000FF8
+#define IXGBE_MIN_EITR 8
+#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
+ (0x012300 + (((_i) - 24) * 4)))
+#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
+#define IXGBE_EITR_LLI_MOD 0x00008000
+#define IXGBE_EITR_CNT_WDIS 0x80000000
+#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */
+#define IXGBE_EITRSEL 0x00894
+#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */
+#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */
+#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
+#define IXGBE_GPIE 0x00898
+
+/* Flow Control Registers */
+#define IXGBE_FCADBUL 0x03210
+#define IXGBE_FCADBUH 0x03214
+#define IXGBE_FCAMACL 0x04328
+#define IXGBE_FCAMACH 0x0432C
+#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_PFCTOP 0x03008
+#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTV 0x032A0
+#define IXGBE_FCCFG 0x03D00
+#define IXGBE_TFCS 0x0CE00
+
+/* Receive DMA Registers */
+#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
+ (0x0D000 + ((_i - 64) * 0x40)))
+#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
+ (0x0D004 + ((_i - 64) * 0x40)))
+#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
+ (0x0D008 + ((_i - 64) * 0x40)))
+#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
+ (0x0D010 + ((_i - 64) * 0x40)))
+#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
+ (0x0D018 + ((_i - 64) * 0x40)))
+#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
+ (0x0D028 + ((_i - 64) * 0x40)))
+#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
+ (0x0D02C + ((_i - 64) * 0x40)))
+#define IXGBE_RSCDBU 0x03028
+#define IXGBE_RDDCC 0x02F20
+#define IXGBE_RXMEMWRAP 0x03190
+#define IXGBE_STARCTRL 0x03024
+/*
+ * Split and Replication Receive Control Registers
+ * 00-15 : 0x02100 + n*4
+ * 16-64 : 0x01014 + n*0x40
+ * 64-127: 0x0D014 + (n-64)*0x40
+ */
+#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
+ (0x0D014 + ((_i - 64) * 0x40))))
+/*
+ * Rx DCA Control Register:
+ * 00-15 : 0x02200 + n*4
+ * 16-64 : 0x0100C + n*0x40
+ * 64-127: 0x0D00C + (n-64)*0x40
+ */
+#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
+ (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
+ (0x0D00C + ((_i - 64) * 0x40))))
+#define IXGBE_RDRXCTL 0x02F00
+#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4))
+ /* 8 of these 0x03C00 - 0x03C1C */
+#define IXGBE_RXCTRL 0x03000
+#define IXGBE_DROPEN 0x03D04
+#define IXGBE_RXPBSIZE_SHIFT 10
+
+/* Receive Registers */
+#define IXGBE_RXCSUM 0x05000
+#define IXGBE_RFCTL 0x05008
+#define IXGBE_DRECCCTL 0x02F08
+#define IXGBE_DRECCCTL_DISABLE 0
+/* Multicast Table Array - 128 entries */
+#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4))
+#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
+ (0x0A200 + ((_i) * 8)))
+#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
+ (0x0A204 + ((_i) * 8)))
+#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8))
+#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8))
+/* Packet split receive type */
+#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
+ (0x0EA00 + ((_i) * 4)))
+/* array of 4096 1-bit vlan filters */
+#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4))
+/*array of 4096 4-bit vlan vmdq indices */
+#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
+#define IXGBE_FCTRL 0x05080
+#define IXGBE_VLNCTRL 0x05088
+#define IXGBE_MCSTCTRL 0x05090
+#define IXGBE_MRQC 0x05818
+#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
+#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
+#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
+#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
+#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */
+#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */
+#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */
+#define IXGBE_RQTC 0x0EC70
+#define IXGBE_MTQC 0x08120
+#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */
+#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */
+#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */
+#define IXGBE_VT_CTL 0x051B0
+#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */
+#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
+#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */
+#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */
+#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
+#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
+#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
+#define IXGBE_QDE 0x2F04
+#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */
+#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
+#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
+#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4))
+#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
+#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
+#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
+#define IXGBE_RXFECCERR0 0x051B8
+#define IXGBE_LLITHRESH 0x0EC90
+#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_IMIRVP 0x05AC0
+#define IXGBE_VMD_CTL 0x0581C
+#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */
+#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */
+
+/* Flow Director registers */
+#define IXGBE_FDIRCTRL 0x0EE00
+#define IXGBE_FDIRHKEY 0x0EE68
+#define IXGBE_FDIRSKEY 0x0EE6C
+#define IXGBE_FDIRDIP4M 0x0EE3C
+#define IXGBE_FDIRSIP4M 0x0EE40
+#define IXGBE_FDIRTCPM 0x0EE44
+#define IXGBE_FDIRUDPM 0x0EE48
+#define IXGBE_FDIRIP6M 0x0EE74
+#define IXGBE_FDIRM 0x0EE70
+
+/* Flow Director Stats registers */
+#define IXGBE_FDIRFREE 0x0EE38
+#define IXGBE_FDIRLEN 0x0EE4C
+#define IXGBE_FDIRUSTAT 0x0EE50
+#define IXGBE_FDIRFSTAT 0x0EE54
+#define IXGBE_FDIRMATCH 0x0EE58
+#define IXGBE_FDIRMISS 0x0EE5C
+
+/* Flow Director Programming registers */
+#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
+#define IXGBE_FDIRIPSA 0x0EE18
+#define IXGBE_FDIRIPDA 0x0EE1C
+#define IXGBE_FDIRPORT 0x0EE20
+#define IXGBE_FDIRVLAN 0x0EE24
+#define IXGBE_FDIRHASH 0x0EE28
+#define IXGBE_FDIRCMD 0x0EE2C
+
+/* Transmit DMA registers */
+#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
+#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
+#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
+#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40))
+#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40))
+#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40))
+#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
+#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
+#define IXGBE_DTXCTL 0x07E00
+
+#define IXGBE_DMATXCTL 0x04A80
+#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
+#define IXGBE_PFDTXGSWC 0x08220
+#define IXGBE_DTXMXSZRQ 0x08100
+#define IXGBE_DTXTCPFLGL 0x04A88
+#define IXGBE_DTXTCPFLGH 0x04A8C
+#define IXGBE_LBDRPEN 0x0CA00
+#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
+
+#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */
+#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */
+#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */
+#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */
+
+#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
+
+/* Anti-spoofing defines */
+#define IXGBE_SPOOF_MACAS_MASK 0xFF
+#define IXGBE_SPOOF_VLANAS_MASK 0xFF00
+#define IXGBE_SPOOF_VLANAS_SHIFT 8
+#define IXGBE_PFVFSPOOF_REG_COUNT 8
+
+#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
+/* Tx DCA Control register : 128 of these (0-127) */
+#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40))
+#define IXGBE_TIPG 0x0CB00
+#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_MNGTXMAP 0x0CD10
+#define IXGBE_TIPG_FIBER_DEFAULT 3
+#define IXGBE_TXPBSIZE_SHIFT 10
+
+/* Wake up registers */
+#define IXGBE_WUC 0x05800
+#define IXGBE_WUFC 0x05808
+#define IXGBE_WUS 0x05810
+#define IXGBE_IPAV 0x05838
+#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */
+#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */
+
+#define IXGBE_WUPL 0x05900
+#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
+#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */
+#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) /* Ext Flexible Host
+ * Filter Table */
+
+#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4
+#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2
+
+/* Each Flexible Filter is at most 128 (0x80) bytes in length */
+#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128
+#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */
+#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */
+
+/* Definitions for power management and wakeup registers */
+/* Wake Up Control */
+#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */
+#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */
+#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */
+
+/* Wake Up Filter Control */
+#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
+#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
+#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
+#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
+#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
+#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
+#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
+#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */
+
+#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
+#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
+#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
+#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
+#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
+#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
+#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
+#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */
+#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
+#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */
+#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
+
+/* Wake Up Status */
+#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC
+#define IXGBE_WUS_MAG IXGBE_WUFC_MAG
+#define IXGBE_WUS_EX IXGBE_WUFC_EX
+#define IXGBE_WUS_MC IXGBE_WUFC_MC
+#define IXGBE_WUS_BC IXGBE_WUFC_BC
+#define IXGBE_WUS_ARP IXGBE_WUFC_ARP
+#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4
+#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6
+#define IXGBE_WUS_MNG IXGBE_WUFC_MNG
+#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0
+#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1
+#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2
+#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3
+#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4
+#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5
+#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS
+
+/* Wake Up Packet Length */
+#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
+
+/* DCB registers */
+#define IXGBE_RMCS 0x03D00
+#define IXGBE_DPMCS 0x07F40
+#define IXGBE_PDPMCS 0x0CD00
+#define IXGBE_RUPPBMR 0x050A0
+#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+
+/* Security Control Registers */
+#define IXGBE_SECTXCTRL 0x08800
+#define IXGBE_SECTXSTAT 0x08804
+#define IXGBE_SECTXBUFFAF 0x08808
+#define IXGBE_SECTXMINIFG 0x08810
+#define IXGBE_SECRXCTRL 0x08D00
+#define IXGBE_SECRXSTAT 0x08D04
+
+/* Security Bit Fields and Masks */
+#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001
+#define IXGBE_SECTXCTRL_TX_DIS 0x00000002
+#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004
+
+#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001
+#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002
+
+#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001
+#define IXGBE_SECRXCTRL_RX_DIS 0x00000002
+
+#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001
+#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002
+
+/* LinkSec (MacSec) Registers */
+#define IXGBE_LSECTXCAP 0x08A00
+#define IXGBE_LSECRXCAP 0x08F00
+#define IXGBE_LSECTXCTRL 0x08A04
+#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */
+#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */
+#define IXGBE_LSECTXSA 0x08A10
+#define IXGBE_LSECTXPN0 0x08A14
+#define IXGBE_LSECTXPN1 0x08A18
+#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
+#define IXGBE_LSECRXCTRL 0x08F04
+#define IXGBE_LSECRXSCL 0x08F08
+#define IXGBE_LSECRXSCH 0x08F0C
+#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
+#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
+#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */
+#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */
+#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */
+#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */
+#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */
+#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */
+#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */
+#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */
+#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */
+#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */
+#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */
+#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */
+#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */
+#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */
+#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */
+#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
+#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
+#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */
+#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */
+
+/* LinkSec (MacSec) Bit Fields and Masks */
+#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECTXCAP_SUM_SHIFT 16
+#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000
+#define IXGBE_LSECRXCAP_SUM_SHIFT 16
+
+#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003
+#define IXGBE_LSECTXCTRL_DISABLE 0x0
+#define IXGBE_LSECTXCTRL_AUTH 0x1
+#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2
+#define IXGBE_LSECTXCTRL_AISCI 0x00000020
+#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00
+#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8
+
+#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C
+#define IXGBE_LSECRXCTRL_EN_SHIFT 2
+#define IXGBE_LSECRXCTRL_DISABLE 0x0
+#define IXGBE_LSECRXCTRL_CHECK 0x1
+#define IXGBE_LSECRXCTRL_STRICT 0x2
+#define IXGBE_LSECRXCTRL_DROP 0x3
+#define IXGBE_LSECRXCTRL_PLSH 0x00000040
+#define IXGBE_LSECRXCTRL_RP 0x00000080
+#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33
+
+/* IpSec Registers */
+#define IXGBE_IPSTXIDX 0x08900
+#define IXGBE_IPSTXSALT 0x08904
+#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXIDX 0x08E00
+#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSPI 0x08E14
+#define IXGBE_IPSRXIPIDX 0x08E18
+#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
+#define IXGBE_IPSRXSALT 0x08E2C
+#define IXGBE_IPSRXMOD 0x08E30
+
+#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4
+
+/* DCB registers */
+#define IXGBE_RTRPCS 0x02430
+#define IXGBE_RTTDCS 0x04900
+#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */
+#define IXGBE_RTTPCS 0x0CD00
+#define IXGBE_RTRUP2TC 0x03020
+#define IXGBE_RTTUP2TC 0x0C800
+#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RTTDQSEL 0x04904
+#define IXGBE_RTTDT1C 0x04908
+#define IXGBE_RTTDT1S 0x0490C
+#define IXGBE_RTTDTECC 0x04990
+#define IXGBE_RTTDTECC_NO_BCN 0x00000100
+#define IXGBE_RTTBCNRC 0x04984
+#define IXGBE_RTTBCNRC_RS_ENA 0x80000000
+#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF
+#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14
+#define IXGBE_RTTBCNRC_RF_INT_MASK \
+ (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
+#define IXGBE_RTTBCNRM 0x04980
+
+/* FCoE DMA Context Registers */
+#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */
+#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */
+#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */
+#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */
+#define IXGBE_FCINVST0 0x03FC0 /* FC Invalid DMA Context Status Reg 0 */
+#define IXGBE_FCINVST(_i) (IXGBE_FCINVST0 + ((_i) * 4))
+#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */
+#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */
+#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */
+#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */
+#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */
+#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3
+#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8
+#define IXGBE_FCBUFF_OFFSET_SHIFT 16
+#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */
+#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */
+#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */
+#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */
+#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
+
+/* FCoE SOF/EOF */
+#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */
+#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */
+#define IXGBE_REOFF 0x05158 /* Rx FC EOF */
+#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */
+/* FCoE Filter Context Registers */
+#define IXGBE_FCFLT 0x05108 /* FC FLT Context */
+#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */
+#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */
+#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */
+#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */
+#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */
+#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */
+#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */
+#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */
+#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */
+/* FCoE Receive Control */
+#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */
+#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */
+#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */
+#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */
+#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */
+#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */
+#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */
+#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */
+#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */
+#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */
+#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
+/* FCoE Redirection */
+#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */
+#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */
+#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
+#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */
+#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */
+#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
+
+/* Stats registers */
+#define IXGBE_CRCERRS 0x04000
+#define IXGBE_ILLERRC 0x04004
+#define IXGBE_ERRBC 0x04008
+#define IXGBE_MSPDC 0x04010
+#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
+#define IXGBE_MLFC 0x04034
+#define IXGBE_MRFC 0x04038
+#define IXGBE_RLEC 0x04040
+#define IXGBE_LXONTXC 0x03F60
+#define IXGBE_LXONRXC 0x0CF60
+#define IXGBE_LXOFFTXC 0x03F68
+#define IXGBE_LXOFFRXC 0x0CF68
+#define IXGBE_LXONRXCNT 0x041A4
+#define IXGBE_LXOFFRXCNT 0x041A8
+#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
+#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
+#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
+#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
+#define IXGBE_PRC64 0x0405C
+#define IXGBE_PRC127 0x04060
+#define IXGBE_PRC255 0x04064
+#define IXGBE_PRC511 0x04068
+#define IXGBE_PRC1023 0x0406C
+#define IXGBE_PRC1522 0x04070
+#define IXGBE_GPRC 0x04074
+#define IXGBE_BPRC 0x04078
+#define IXGBE_MPRC 0x0407C
+#define IXGBE_GPTC 0x04080
+#define IXGBE_GORCL 0x04088
+#define IXGBE_GORCH 0x0408C
+#define IXGBE_GOTCL 0x04090
+#define IXGBE_GOTCH 0x04094
+#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
+#define IXGBE_RUC 0x040A4
+#define IXGBE_RFC 0x040A8
+#define IXGBE_ROC 0x040AC
+#define IXGBE_RJC 0x040B0
+#define IXGBE_MNGPRC 0x040B4
+#define IXGBE_MNGPDC 0x040B8
+#define IXGBE_MNGPTC 0x0CF90
+#define IXGBE_TORL 0x040C0
+#define IXGBE_TORH 0x040C4
+#define IXGBE_TPR 0x040D0
+#define IXGBE_TPT 0x040D4
+#define IXGBE_PTC64 0x040D8
+#define IXGBE_PTC127 0x040DC
+#define IXGBE_PTC255 0x040E0
+#define IXGBE_PTC511 0x040E4
+#define IXGBE_PTC1023 0x040E8
+#define IXGBE_PTC1522 0x040EC
+#define IXGBE_MPTC 0x040F0
+#define IXGBE_BPTC 0x040F4
+#define IXGBE_XEC 0x04120
+#define IXGBE_SSVPC 0x08780
+
+#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4))
+#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
+ (0x08600 + ((_i) * 4)))
+#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4))
+
+#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
+#define IXGBE_FCCRC 0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */
+#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */
+#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */
+#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */
+#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */
+#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */
+#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */
+#define IXGBE_O2BGPTC 0x041C4
+#define IXGBE_O2BSPC 0x087B0
+#define IXGBE_B2OSPC 0x041C0
+#define IXGBE_B2OGPRC 0x02F90
+#define IXGBE_PCRC8ECL 0x0E810
+#define IXGBE_PCRC8ECH 0x0E811
+#define IXGBE_PCRC8ECH_MASK 0x1F
+#define IXGBE_LDPCECL 0x0E820
+#define IXGBE_LDPCECH 0x0E821
+
+/* Management */
+#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MANC 0x05820
+#define IXGBE_MFVAL 0x05824
+#define IXGBE_MANC2H 0x05860
+#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MIPAF 0x058B0
+#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */
+#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_LSWFW 0x15014
+
+/* ARC Subsystem registers */
+#define IXGBE_HICR 0x15F00
+#define IXGBE_FWSTS 0x15F0C
+#define IXGBE_HSMC0R 0x15F04
+#define IXGBE_HSMC1R 0x15F08
+#define IXGBE_SWSR 0x15F10
+#define IXGBE_HFDR 0x15FE8
+#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */
+
+#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */
+/* Driver sets this bit when done to put command in RAM */
+#define IXGBE_HICR_C 0x02
+#define IXGBE_HICR_SV 0x04 /* Status Validity */
+#define IXGBE_HICR_FW_RESET_ENABLE 0x40
+#define IXGBE_HICR_FW_RESET 0x80
+
+/* PCI-E registers */
+#define IXGBE_GCR 0x11000
+#define IXGBE_GTV 0x11004
+#define IXGBE_FUNCTAG 0x11008
+#define IXGBE_GLT 0x1100C
+#define IXGBE_GSCL_1 0x11010
+#define IXGBE_GSCL_2 0x11014
+#define IXGBE_GSCL_3 0x11018
+#define IXGBE_GSCL_4 0x1101C
+#define IXGBE_GSCN_0 0x11020
+#define IXGBE_GSCN_1 0x11024
+#define IXGBE_GSCN_2 0x11028
+#define IXGBE_GSCN_3 0x1102C
+#define IXGBE_FACTPS 0x10150
+#define IXGBE_PCIEANACTL 0x11040
+#define IXGBE_SWSM 0x10140
+#define IXGBE_FWSM 0x10148
+#define IXGBE_GSSR 0x10160
+#define IXGBE_MREVID 0x11064
+#define IXGBE_DCA_ID 0x11070
+#define IXGBE_DCA_CTRL 0x11074
+#define IXGBE_SWFW_SYNC IXGBE_GSSR
+
+/* PCIe registers 82599-specific */
+#define IXGBE_GCR_EXT 0x11050
+#define IXGBE_GSCL_5_82599 0x11030
+#define IXGBE_GSCL_6_82599 0x11034
+#define IXGBE_GSCL_7_82599 0x11038
+#define IXGBE_GSCL_8_82599 0x1103C
+#define IXGBE_PHYADR_82599 0x11040
+#define IXGBE_PHYDAT_82599 0x11044
+#define IXGBE_PHYCTL_82599 0x11048
+#define IXGBE_PBACLR_82599 0x11068
+#define IXGBE_CIAA_82599 0x11088
+#define IXGBE_CIAD_82599 0x1108C
+#define IXGBE_PICAUSE 0x110B0
+#define IXGBE_PIENA 0x110B8
+#define IXGBE_CDQ_MBR_82599 0x110B4
+#define IXGBE_PCIESPARE 0x110BC
+#define IXGBE_MISC_REG_82599 0x110F0
+#define IXGBE_ECC_CTRL_0_82599 0x11100
+#define IXGBE_ECC_CTRL_1_82599 0x11104
+#define IXGBE_ECC_STATUS_82599 0x110E0
+#define IXGBE_BAR_CTRL_82599 0x110F4
+
+/* PCI Express Control */
+#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
+#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
+#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
+#define IXGBE_GCR_CAP_VER2 0x00040000
+
+#define IXGBE_GCR_EXT_MSIX_EN 0x80000000
+#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001
+#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002
+#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003
+#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \
+ IXGBE_GCR_EXT_VT_MODE_64)
+
+/* Time Sync Registers */
+#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
+#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
+#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */
+#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */
+#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */
+#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */
+#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */
+#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */
+#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */
+#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
+#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
+#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
+#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */
+#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */
+#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */
+#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */
+#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */
+#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */
+#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */
+#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */
+#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */
+#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
+#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
+#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
+#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
+
+/* Diagnostic Registers */
+#define IXGBE_RDSTATCTL 0x02C20
+#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN 0x02F08
+#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4))
+#define IXGBE_RDPROBE 0x02F20
+#define IXGBE_RDMAM 0x02F30
+#define IXGBE_RDMAD 0x02F34
+#define IXGBE_TDSTATCTL 0x07C20
+#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
+#define IXGBE_TDHMPN 0x07F08
+#define IXGBE_TDHMPN2 0x082FC
+#define IXGBE_TXDESCIC 0x082CC
+#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4))
+#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4))
+#define IXGBE_TDPROBE 0x07F20
+#define IXGBE_TXBUFCTRL 0x0C600
+#define IXGBE_TXBUFDATA0 0x0C610
+#define IXGBE_TXBUFDATA1 0x0C614
+#define IXGBE_TXBUFDATA2 0x0C618
+#define IXGBE_TXBUFDATA3 0x0C61C
+#define IXGBE_RXBUFCTRL 0x03600
+#define IXGBE_RXBUFDATA0 0x03610
+#define IXGBE_RXBUFDATA1 0x03614
+#define IXGBE_RXBUFDATA2 0x03618
+#define IXGBE_RXBUFDATA3 0x0361C
+#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_RFVAL 0x050A4
+#define IXGBE_MDFTC1 0x042B8
+#define IXGBE_MDFTC2 0x042C0
+#define IXGBE_MDFTFIFO1 0x042C4
+#define IXGBE_MDFTFIFO2 0x042C8
+#define IXGBE_MDFTS 0x042CC
+#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
+#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
+#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
+#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
+#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
+#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
+#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
+#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
+#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
+#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
+#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
+#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
+#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
+#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
+#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
+#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
+#define IXGBE_PCIEECCCTL0 0x11100
+#define IXGBE_PCIEECCCTL1 0x11104
+#define IXGBE_RXDBUECC 0x03F70
+#define IXGBE_TXDBUECC 0x0CF70
+#define IXGBE_RXDBUEST 0x03F74
+#define IXGBE_TXDBUEST 0x0CF74
+#define IXGBE_PBTXECC 0x0C300
+#define IXGBE_PBRXECC 0x03300
+#define IXGBE_GHECCR 0x110B0
+
+/* MAC Registers */
+#define IXGBE_PCS1GCFIG 0x04200
+#define IXGBE_PCS1GLCTL 0x04208
+#define IXGBE_PCS1GLSTA 0x0420C
+#define IXGBE_PCS1GDBG0 0x04210
+#define IXGBE_PCS1GDBG1 0x04214
+#define IXGBE_PCS1GANA 0x04218
+#define IXGBE_PCS1GANLP 0x0421C
+#define IXGBE_PCS1GANNP 0x04220
+#define IXGBE_PCS1GANLPNP 0x04224
+#define IXGBE_HLREG0 0x04240
+#define IXGBE_HLREG1 0x04244
+#define IXGBE_PAP 0x04248
+#define IXGBE_MACA 0x0424C
+#define IXGBE_APAE 0x04250
+#define IXGBE_ARD 0x04254
+#define IXGBE_AIS 0x04258
+#define IXGBE_MSCA 0x0425C
+#define IXGBE_MSRWD 0x04260
+#define IXGBE_MLADD 0x04264
+#define IXGBE_MHADD 0x04268
+#define IXGBE_MAXFRS 0x04268
+#define IXGBE_TREG 0x0426C
+#define IXGBE_PCSS1 0x04288
+#define IXGBE_PCSS2 0x0428C
+#define IXGBE_XPCSS 0x04290
+#define IXGBE_MFLCN 0x04294
+#define IXGBE_SERDESC 0x04298
+#define IXGBE_MACS 0x0429C
+#define IXGBE_AUTOC 0x042A0
+#define IXGBE_LINKS 0x042A4
+#define IXGBE_LINKS2 0x04324
+#define IXGBE_AUTOC2 0x042A8
+#define IXGBE_AUTOC3 0x042AC
+#define IXGBE_ANLP1 0x042B0
+#define IXGBE_ANLP2 0x042B4
+#define IXGBE_MACC 0x04330
+#define IXGBE_ATLASCTL 0x04800
+#define IXGBE_MMNGC 0x042D0
+#define IXGBE_ANLPNP1 0x042D4
+#define IXGBE_ANLPNP2 0x042D8
+#define IXGBE_KRPCSFC 0x042E0
+#define IXGBE_KRPCSS 0x042E4
+#define IXGBE_FECS1 0x042E8
+#define IXGBE_FECS2 0x042EC
+#define IXGBE_SMADARCTL 0x14F10
+#define IXGBE_MPVC 0x04318
+#define IXGBE_SGMIIC 0x04314
+
+/* Statistics Registers */
+#define IXGBE_RXNFGPC 0x041B0
+#define IXGBE_RXNFGBCL 0x041B4
+#define IXGBE_RXNFGBCH 0x041B8
+#define IXGBE_RXDGPC 0x02F50
+#define IXGBE_RXDGBCL 0x02F54
+#define IXGBE_RXDGBCH 0x02F58
+#define IXGBE_RXDDGPC 0x02F5C
+#define IXGBE_RXDDGBCL 0x02F60
+#define IXGBE_RXDDGBCH 0x02F64
+#define IXGBE_RXLPBKGPC 0x02F68
+#define IXGBE_RXLPBKGBCL 0x02F6C
+#define IXGBE_RXLPBKGBCH 0x02F70
+#define IXGBE_RXDLPBKGPC 0x02F74
+#define IXGBE_RXDLPBKGBCL 0x02F78
+#define IXGBE_RXDLPBKGBCH 0x02F7C
+#define IXGBE_TXDGPC 0x087A0
+#define IXGBE_TXDGBCL 0x087A4
+#define IXGBE_TXDGBCH 0x087A8
+
+#define IXGBE_RXDSTATCTRL 0x02F40
+
+/* Copper Pond 2 link timeout */
+#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
+
+/* Omer CORECTL */
+#define IXGBE_CORECTL 0x014F00
+/* BARCTRL */
+#define IXGBE_BARCTRL 0x110F4
+#define IXGBE_BARCTRL_FLSIZE 0x0700
+#define IXGBE_BARCTRL_FLSIZE_SHIFT 8
+#define IXGBE_BARCTRL_CSRSIZE 0x2000
+
+/* RSCCTL Bit Masks */
+#define IXGBE_RSCCTL_RSCEN 0x01
+#define IXGBE_RSCCTL_MAXDESC_1 0x00
+#define IXGBE_RSCCTL_MAXDESC_4 0x04
+#define IXGBE_RSCCTL_MAXDESC_8 0x08
+#define IXGBE_RSCCTL_MAXDESC_16 0x0C
+
+/* RSCDBU Bit Masks */
+#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F
+#define IXGBE_RSCDBU_RSCACKDIS 0x00000080
+
+/* RDRXCTL Bit Masks */
+#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
+#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */
+#define IXGBE_RDRXCTL_MVMEN 0x00000020
+#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
+#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */
+#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */
+#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disable RSC compl on LLI */
+#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC enabled */
+#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC enabled */
+
+/* RQTC Bit Masks and Shifts */
+#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4)
+#define IXGBE_RQTC_TC0_MASK (0x7 << 0)
+#define IXGBE_RQTC_TC1_MASK (0x7 << 4)
+#define IXGBE_RQTC_TC2_MASK (0x7 << 8)
+#define IXGBE_RQTC_TC3_MASK (0x7 << 12)
+#define IXGBE_RQTC_TC4_MASK (0x7 << 16)
+#define IXGBE_RQTC_TC5_MASK (0x7 << 20)
+#define IXGBE_RQTC_TC6_MASK (0x7 << 24)
+#define IXGBE_RQTC_TC7_MASK (0x7 << 28)
+
+/* PSRTYPE.RQPL Bit masks and shift */
+#define IXGBE_PSRTYPE_RQPL_MASK 0x7
+#define IXGBE_PSRTYPE_RQPL_SHIFT 29
+
+/* CTRL Bit Masks */
+#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
+#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */
+#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */
+
+/* FACTPS */
+#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */
+
+/* MHADD Bit Masks */
+#define IXGBE_MHADD_MFS_MASK 0xFFFF0000
+#define IXGBE_MHADD_MFS_SHIFT 16
+
+/* Extended Device Control */
+#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */
+#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */
+#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
+#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+
+/* Direct Cache Access (DCA) definitions */
+#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */
+#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */
+
+#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */
+#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */
+#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
+#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
+
+#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */
+#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */
+
+/* MSCA Bit Masks */
+#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Address (new protocol) */
+#define IXGBE_MSCA_NP_ADDR_SHIFT 0
+#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Device Type (new protocol) */
+#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old protocol */
+#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */
+#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/
+#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */
+#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */
+#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */
+#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (write) */
+#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (read) */
+#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (read, auto inc)*/
+#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */
+#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */
+#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new protocol) */
+#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old protocol) */
+#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */
+#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress enable */
+
+/* MSRWD bit masks */
+#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT 16
+
+/* Atlas registers */
+#define IXGBE_ATLAS_PDN_LPBK 0x24
+#define IXGBE_ATLAS_PDN_10G 0xB
+#define IXGBE_ATLAS_PDN_1G 0xC
+#define IXGBE_ATLAS_PDN_AN 0xD
+
+/* Atlas bit masks */
+#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000
+#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10
+#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0
+#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0
+#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0
+
+/* Omer bit masks */
+#define IXGBE_CORECTL_WRITE_CMD 0x00010000
+
+/* MDIO definitions */
+
+#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
+
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
+
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
+#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
+
+/* MII clause 22/28 definitions */
+#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
+#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */
+#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/
+#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/
+#define IXGBE_MII_AUTONEG_REG 0x0
+
+#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
+#define IXGBE_MAX_PHY_ADDR 32
+
+/* PHY IDs*/
+#define TN1010_PHY_ID 0x00A19410
+#define TNX_FW_REV 0xB
+#define X540_PHY_ID 0x01540200
+#define QT2022_PHY_ID 0x0043A400
+#define ATH_PHY_ID 0x03429050
+#define AQ_FW_REV 0x20
+
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
+
+/* Special PHY Init Routine */
+#define IXGBE_PHY_INIT_OFFSET_NL 0x002B
+#define IXGBE_PHY_INIT_END_NL 0xFFFF
+#define IXGBE_CONTROL_MASK_NL 0xF000
+#define IXGBE_DATA_MASK_NL 0x0FFF
+#define IXGBE_CONTROL_SHIFT_NL 12
+#define IXGBE_DELAY_NL 0
+#define IXGBE_DATA_NL 1
+#define IXGBE_CONTROL_NL 0x000F
+#define IXGBE_CONTROL_EOL_NL 0x0FFF
+#define IXGBE_CONTROL_SOL_NL 0x0000
+
+/* General purpose Interrupt Enable */
+#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
+#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
+#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */
+#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME 0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
+#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
+#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */
+#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */
+#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */
+#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */
+
+/* Packet Buffer Initialization */
+#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */
+#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
+#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
+#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
+#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
+#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */
+#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer*/
+#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer*/
+
+#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */
+#define IXGBE_MAX_PB 8
+
+/* Packet buffer allocation strategies */
+enum {
+ PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */
+#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL
+ PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */
+#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED
+};
+
+/* Transmit Flow Control status */
+#define IXGBE_TFCS_TXOFF 0x00000001
+#define IXGBE_TFCS_TXOFF0 0x00000100
+#define IXGBE_TFCS_TXOFF1 0x00000200
+#define IXGBE_TFCS_TXOFF2 0x00000400
+#define IXGBE_TFCS_TXOFF3 0x00000800
+#define IXGBE_TFCS_TXOFF4 0x00001000
+#define IXGBE_TFCS_TXOFF5 0x00002000
+#define IXGBE_TFCS_TXOFF6 0x00004000
+#define IXGBE_TFCS_TXOFF7 0x00008000
+
+/* TCP Timer */
+#define IXGBE_TCPTIMER_KS 0x00000100
+#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200
+#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400
+#define IXGBE_TCPTIMER_LOOP 0x00000800
+#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF
+
+/* HLREG0 Bit Masks */
+#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */
+#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */
+#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */
+#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */
+#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */
+#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */
+#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */
+#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */
+#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */
+#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */
+#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */
+#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */
+#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */
+#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */
+#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */
+
+/* VMD_CTL bitmasks */
+#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001
+#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
+
+/* VT_CTL bitmasks */
+#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */
+#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */
+#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */
+#define IXGBE_VT_CTL_POOL_SHIFT 7
+#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
+
+/* VMOLR bitmasks */
+#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */
+#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */
+#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */
+#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */
+#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */
+
+/* VFRE bitmask */
+#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF
+
+#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+/* RDHMPN and TDHMPN bitmasks */
+#define IXGBE_RDHMPN_RDICADDR 0x007FF800
+#define IXGBE_RDHMPN_RDICRDREQ 0x00800000
+#define IXGBE_RDHMPN_RDICADDR_SHIFT 11
+#define IXGBE_TDHMPN_TDICADDR 0x003FF800
+#define IXGBE_TDHMPN_TDICRDREQ 0x00800000
+#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
+
+#define IXGBE_RDMAM_MEM_SEL_SHIFT 13
+#define IXGBE_RDMAM_DWORD_SHIFT 9
+#define IXGBE_RDMAM_DESC_COMP_FIFO 1
+#define IXGBE_RDMAM_DFC_CMD_FIFO 2
+#define IXGBE_RDMAM_TCN_STATUS_RAM 4
+#define IXGBE_RDMAM_WB_COLL_FIFO 5
+#define IXGBE_RDMAM_QSC_CNT_RAM 6
+#define IXGBE_RDMAM_QSC_QUEUE_CNT 8
+#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA
+#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135
+#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4
+#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48
+#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7
+#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256
+#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9
+#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8
+#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4
+#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64
+#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32
+#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128
+#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8
+
+#define IXGBE_TXDESCIC_READY 0x80000000
+
+/* Receive Checksum Control */
+#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
+#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
+
+/* FCRTL Bit Masks */
+#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */
+#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */
+
+/* PAP bit masks*/
+#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */
+
+/* RMCS Bit Masks */
+#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recycle Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RMCS_RAC 0x00000004
+#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
+#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */
+#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */
+#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */
+
+/* FCCFG Bit Masks */
+#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */
+#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */
+#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */
+#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */
+#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
+#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
+#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
+#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
+#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */
+#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */
+#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */
+#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */
+#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
+#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */
+#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
+#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
+#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
+#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */
+#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
+#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
+#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */
+#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
+#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
+#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+ IXGBE_EIMS_RTX_QUEUE | \
+ IXGBE_EIMS_LSC | \
+ IXGBE_EIMS_TCP_TIMER | \
+ IXGBE_EIMS_OTHER)
+
+/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */
+#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */
+#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
+#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */
+#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */
+#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */
+#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */
+#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */
+#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */
+#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */
+#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass check of control bits */
+#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */
+#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */
+#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */
+#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */
+#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */
+
+#define IXGBE_MAX_FTQF_FILTERS 128
+#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003
+#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000
+#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001
+#define IXGBE_FTQF_PROTOCOL_SCTP 2
+#define IXGBE_FTQF_PRIORITY_MASK 0x00000007
+#define IXGBE_FTQF_PRIORITY_SHIFT 2
+#define IXGBE_FTQF_POOL_MASK 0x0000003F
+#define IXGBE_FTQF_POOL_SHIFT 8
+#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F
+#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25
+#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E
+#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D
+#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B
+#define IXGBE_FTQF_DEST_PORT_MASK 0x17
+#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F
+#define IXGBE_FTQF_POOL_MASK_EN 0x40000000
+#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000
+
+/* Interrupt clear mask */
+#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_REG_NUM 25
+#define IXGBE_IVAR_REG_NUM_82599 64
+#define IXGBE_IVAR_TXRX_ENTRY 96
+#define IXGBE_IVAR_RX_ENTRY 64
+#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i))
+#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i))
+#define IXGBE_IVAR_TX_ENTRY 32
+
+#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */
+#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */
+
+#define IXGBE_MSIX_VECTOR(_i) (0 + (_i))
+
+#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
+
+/* ETYPE Queue Filter/Select Bit Masks */
+#define IXGBE_MAX_ETQF_FILTERS 8
+#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */
+#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */
+#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
+#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
+#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
+
+#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */
+#define IXGBE_ETQS_RX_QUEUE_SHIFT 16
+#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */
+#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */
+
+/*
+ * ETQF filter list: one static filter per filter consumer. This is
+ * to avoid filter collisions later. Add new filters
+ * here!!
+ *
+ * Current filters:
+ * EAPOL 802.1x (0x888e): Filter 0
+ * FCoE (0x8906): Filter 2
+ * 1588 (0x88f7): Filter 3
+ * FIP (0x8914): Filter 4
+ */
+#define IXGBE_ETQF_FILTER_EAPOL 0
+#define IXGBE_ETQF_FILTER_FCOE 2
+#define IXGBE_ETQF_FILTER_1588 3
+#define IXGBE_ETQF_FILTER_FIP 4
+/* VLAN Control Bit Masks */
+#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
+#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
+#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */
+#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */
+#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */
+
+/* VLAN pool filtering masks */
+#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */
+#define IXGBE_VLVF_ENTRIES 64
+#define IXGBE_VLVF_VLANID_MASK 0x00000FFF
+
+/* Per VF Port VLAN insertion rules */
+#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
+#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
+
+#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */
+
+/* STATUS Bit Masks */
+#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */
+#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/
+#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */
+
+#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */
+#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */
+
+/* ESDP Bit Masks */
+#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
+#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
+#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
+#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
+#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
+#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */
+#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */
+
+/* LEDCTL Bit Masks */
+#define IXGBE_LED_IVRT_BASE 0x00000040
+#define IXGBE_LED_BLINK_BASE 0x00000080
+#define IXGBE_LED_MODE_MASK_BASE 0x0000000F
+#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i)))
+#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i))
+#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
+#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
+#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+
+/* LED modes */
+#define IXGBE_LED_LINK_UP 0x0
+#define IXGBE_LED_LINK_10G 0x1
+#define IXGBE_LED_MAC 0x2
+#define IXGBE_LED_FILTER 0x3
+#define IXGBE_LED_LINK_ACTIVE 0x4
+#define IXGBE_LED_LINK_1G 0x5
+#define IXGBE_LED_ON 0xE
+#define IXGBE_LED_OFF 0xF
+
+/* AUTOC Bit Masks */
+#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000
+#define IXGBE_AUTOC_KX4_SUPP 0x80000000
+#define IXGBE_AUTOC_KX_SUPP 0x40000000
+#define IXGBE_AUTOC_PAUSE 0x30000000
+#define IXGBE_AUTOC_ASM_PAUSE 0x20000000
+#define IXGBE_AUTOC_SYM_PAUSE 0x10000000
+#define IXGBE_AUTOC_RF 0x08000000
+#define IXGBE_AUTOC_PD_TMR 0x06000000
+#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
+#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
+#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
+#define IXGBE_AUTOC_FECA 0x00040000
+#define IXGBE_AUTOC_FECR 0x00020000
+#define IXGBE_AUTOC_KR_SUPP 0x00010000
+#define IXGBE_AUTOC_AN_RESTART 0x00001000
+#define IXGBE_AUTOC_FLU 0x00000001
+#define IXGBE_AUTOC_LMS_SHIFT 13
+#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
+#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
+#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000
+#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16
+#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
+
+#define IXGBE_MACC_FLU 0x00000001
+#define IXGBE_MACC_FSV_10G 0x00030000
+#define IXGBE_MACC_FS 0x00040000
+#define IXGBE_MAC_RX2TX_LPBK 0x00000002
+
+/* LINKS Bit Masks */
+#define IXGBE_LINKS_KX_AN_COMP 0x80000000
+#define IXGBE_LINKS_UP 0x40000000
+#define IXGBE_LINKS_SPEED 0x20000000
+#define IXGBE_LINKS_MODE 0x18000000
+#define IXGBE_LINKS_RX_MODE 0x06000000
+#define IXGBE_LINKS_TX_MODE 0x01800000
+#define IXGBE_LINKS_XGXS_EN 0x00400000
+#define IXGBE_LINKS_SGMII_EN 0x02000000
+#define IXGBE_LINKS_PCS_1G_EN 0x00200000
+#define IXGBE_LINKS_1G_AN_EN 0x00100000
+#define IXGBE_LINKS_KX_AN_IDLE 0x00080000
+#define IXGBE_LINKS_1G_SYNC 0x00040000
+#define IXGBE_LINKS_10G_ALIGN 0x00020000
+#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000
+#define IXGBE_LINKS_TL_FAULT 0x00001000
+#define IXGBE_LINKS_SIGNAL 0x00000F00
+
+#define IXGBE_LINKS_SPEED_82599 0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
+#define IXGBE_LINKS_SPEED_100_82599 0x10000000
+#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
+#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
+
+#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040
+
+/* PCS1GLSTA Bit Masks */
+#define IXGBE_PCS1GLSTA_LINK_OK 1
+#define IXGBE_PCS1GLSTA_SYNK_OK 0x10
+#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000
+#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000
+#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000
+#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000
+#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000
+
+#define IXGBE_PCS1GANA_SYM_PAUSE 0x80
+#define IXGBE_PCS1GANA_ASM_PAUSE 0x100
+
+/* PCS1GLCTL Bit Masks */
+#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */
+#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1
+#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20
+#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40
+#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000
+#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000
+
+/* ANLP1 Bit Masks */
+#define IXGBE_ANLP1_PAUSE 0x0C00
+#define IXGBE_ANLP1_SYM_PAUSE 0x0400
+#define IXGBE_ANLP1_ASM_PAUSE 0x0800
+#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000
+
+/* SW Semaphore Register bitmasks */
+#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
+
+/* SW_FW_SYNC/GSSR definitions */
+#define IXGBE_GSSR_EEP_SM 0x0001
+#define IXGBE_GSSR_PHY0_SM 0x0002
+#define IXGBE_GSSR_PHY1_SM 0x0004
+#define IXGBE_GSSR_MAC_CSR_SM 0x0008
+#define IXGBE_GSSR_FLASH_SM 0x0010
+#define IXGBE_GSSR_SW_MNG_SM 0x0400
+
+/* FW Status register bitmask */
+#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
+
+/* EEC Register */
+#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */
+#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */
+#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */
+#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */
+#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */
+#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */
+#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */
+#define IXGBE_EEC_FWE_SHIFT 4
+#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */
+#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */
+#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */
+#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */
+#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */
+#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */
+#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define IXGBE_EEC_ADDR_SIZE 0x00000400
+#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */
+#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
+
+#define IXGBE_EEC_SIZE_SHIFT 11
+#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6
+#define IXGBE_EEPROM_OPCODE_BITS 8
+
+/* Part Number String Length */
+#define IXGBE_PBANUM_LENGTH 11
+
+/* Checksum and EEPROM pointers */
+#define IXGBE_PBANUM_PTR_GUARD 0xFAFA
+#define IXGBE_EEPROM_CHECKSUM 0x3F
+#define IXGBE_EEPROM_SUM 0xBABA
+#define IXGBE_PCIE_ANALOG_PTR 0x03
+#define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_PHY_PTR 0x04
+#define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_OPTION_ROM_PTR 0x05
+#define IXGBE_PCIE_GENERAL_PTR 0x06
+#define IXGBE_PCIE_CONFIG0_PTR 0x07
+#define IXGBE_PCIE_CONFIG1_PTR 0x08
+#define IXGBE_CORE0_PTR 0x09
+#define IXGBE_CORE1_PTR 0x0A
+#define IXGBE_MAC0_PTR 0x0B
+#define IXGBE_MAC1_PTR 0x0C
+#define IXGBE_CSR0_CONFIG_PTR 0x0D
+#define IXGBE_CSR1_CONFIG_PTR 0x0E
+#define IXGBE_FW_PTR 0x0F
+#define IXGBE_PBANUM0_PTR 0x15
+#define IXGBE_PBANUM1_PTR 0x16
+#define IXGBE_FREE_SPACE_PTR 0X3E
+#define IXGBE_SAN_MAC_ADDR_PTR 0x28
+#define IXGBE_DEVICE_CAPS 0x2C
+#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
+#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
+#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
+
+/* MSI-X capability fields masks */
+#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF
+
+/* Legacy EEPROM word offsets */
+#define IXGBE_ISCSI_BOOT_CAPS 0x0033
+#define IXGBE_ISCSI_SETUP_PORT_0 0x0030
+#define IXGBE_ISCSI_SETUP_PORT_1 0x0034
+
+/* EEPROM Commands - SPI */
+#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */
+#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01
+#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
+#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
+#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */
+#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enable latch */
+#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04
+#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */
+#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */
+#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
+#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
+#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */
+#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */
+#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
+#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
+#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */
+
+#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
+
+#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
+#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
+#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
+
+#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
+#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+
+#ifndef IXGBE_EERD_EEWR_ATTEMPTS
+/* Number of 5 microseconds we wait for EERD read and
+ * EERW write to complete */
+#define IXGBE_EERD_EEWR_ATTEMPTS 100000
+#endif
+
+#ifndef IXGBE_FLUDONE_ATTEMPTS
+/* # attempts we wait for flush update to complete */
+#define IXGBE_FLUDONE_ATTEMPTS 20000
+#endif
+
+#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */
+#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */
+#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */
+#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */
+
+#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0
+#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3
+#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1
+#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2
+#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2
+#define IXGBE_FW_LESM_STATE_1 0x1
+#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */
+#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
+#define IXGBE_FW_PATCH_VERSION_4 0x7
+#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */
+#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */
+#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */
+#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt. SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt. WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt. WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt. SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt. WWN base exists */
+
+/* PCI Bus Info */
+#define IXGBE_PCI_DEVICE_STATUS 0xAA
+#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020
+#define IXGBE_PCI_LINK_STATUS 0xB2
+#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
+#define IXGBE_PCI_LINK_WIDTH 0x3F0
+#define IXGBE_PCI_LINK_WIDTH_1 0x10
+#define IXGBE_PCI_LINK_WIDTH_2 0x20
+#define IXGBE_PCI_LINK_WIDTH_4 0x40
+#define IXGBE_PCI_LINK_WIDTH_8 0x80
+#define IXGBE_PCI_LINK_SPEED 0xF
+#define IXGBE_PCI_LINK_SPEED_2500 0x1
+#define IXGBE_PCI_LINK_SPEED_5000 0x2
+#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
+#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
+#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
+
+/* Check whether address is multicast. This is little-endian specific check.*/
+#define IXGBE_IS_MULTICAST(Address) \
+ (bool)(((u8 *)(Address))[0] & ((u8)0x01))
+
+/* Check whether an address is broadcast. */
+#define IXGBE_IS_BROADCAST(Address) \
+ ((((u8 *)(Address))[0] == ((u8)0xff)) && \
+ (((u8 *)(Address))[1] == ((u8)0xff)))
+
+/* RAH */
+#define IXGBE_RAH_VIND_MASK 0x003C0000
+#define IXGBE_RAH_VIND_SHIFT 18
+#define IXGBE_RAH_AV 0x80000000
+#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF
+
+/* Header split receive */
+#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
+#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E
+#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
+#define IXGBE_RFCTL_NFSW_DIS 0x00000040
+#define IXGBE_RFCTL_NFSR_DIS 0x00000080
+#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300
+#define IXGBE_RFCTL_NFS_VER_SHIFT 8
+#define IXGBE_RFCTL_NFS_VER_2 0
+#define IXGBE_RFCTL_NFS_VER_3 1
+#define IXGBE_RFCTL_NFS_VER_4 2
+#define IXGBE_RFCTL_IPV6_DIS 0x00000400
+#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800
+#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000
+#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000
+#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Transmit Config masks */
+#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. write-back flushing */
+#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */
+/* Enable short packet padding to 64 bytes */
+#define IXGBE_TX_PAD_ENABLE 0x00000400
+#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */
+/* This allows for 16K packets + 4k for vlan */
+#define IXGBE_MAX_FRAME_SZ 0x40040000
+
+#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
+#define IXGBE_RXDCTL_RLPML_EN 0x00008000
+#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
+
+#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
+#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
+#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
+#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
+#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
+/* Receive Priority Flow Control Enable */
+#define IXGBE_FCTRL_RPFCE 0x00004000
+#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
+#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */
+#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */
+#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
+#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
+
+#define IXGBE_MFLCN_RPFCE_SHIFT 4
+
+/* Multiple Receive Queue Control */
+#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */
+#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */
+#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */
+#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */
+#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */
+#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */
+#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */
+#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */
+#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */
+#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */
+#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
+#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000
+#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+#define IXGBE_MRQC_L3L4TXSWEN 0x00008000
+
+/* Queue Drop Enable */
+#define IXGBE_QDE_ENABLE 0x00000001
+#define IXGBE_QDE_IDX_MASK 0x00007F00
+#define IXGBE_QDE_IDX_SHIFT 8
+
+#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+
+#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000
+#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000
+#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000
+#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000
+/* Multiple Transmit Queue Command Register */
+#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */
+#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */
+#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */
+#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */
+#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */
+#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
+#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA or 4 TQ if VT_ENA */
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
+#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
+#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
+#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */
+#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
+#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
+#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */
+#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */
+#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCoEFe/IPE */
+#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */
+#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */
+#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */
+#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */
+#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT 13
+#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT 12
+
+#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
+#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR 0x00000010
+#define IXGBE_PSRTYPE_UDPHDR 0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
+#define IXGBE_PSRTYPE_L2HDR 0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
+#define IXGBE_SRRCTL_RDMTS_SHIFT 22
+#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
+#define IXGBE_SRRCTL_DROP_EN 0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
+
+#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000
+#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT 17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
+#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
+#define IXGBE_RXDADV_SPH 0x8000
+
+/* RSS Hash results */
+#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000
+#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001
+#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003
+#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004
+#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor. */
+#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000
+#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */
+#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */
+#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */
+#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */
+#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */
+
+/* Security Processing bit Indication */
+#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000
+#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000
+#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXD_ERR_CE | \
+ IXGBE_RXD_ERR_LE | \
+ IXGBE_RXD_ERR_PE | \
+ IXGBE_RXD_ERR_OSE | \
+ IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXDADV_ERR_CE | \
+ IXGBE_RXDADV_ERR_LE | \
+ IXGBE_RXDADV_ERR_PE | \
+ IXGBE_RXDADV_ERR_OSE | \
+ IXGBE_RXDADV_ERR_USE)
+
+/* Multicast bit mask */
+#define IXGBE_MCSTCTRL_MFE 0x4
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024
+
+/* Vlan-specific macros */
+#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
+#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* SR-IOV specific macros */
+#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4)
+#define IXGBE_MBVFICR(_i) (0x00710 + (_i * 4))
+#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600))
+#define IXGBE_VFLREC(_i) (0x00700 + (_i * 4))
+
+enum ixgbe_fdir_pballoc_type {
+ IXGBE_FDIR_PBALLOC_NONE = 0,
+ IXGBE_FDIR_PBALLOC_64K = 1,
+ IXGBE_FDIR_PBALLOC_128K = 2,
+ IXGBE_FDIR_PBALLOC_256K = 3,
+};
+#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT 16
+
+/* Flow Director register values */
+#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001
+#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002
+#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003
+#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008
+#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010
+#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020
+#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080
+#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8
+#define IXGBE_FDIRCTRL_FLEX_SHIFT 16
+#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000
+#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24
+#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000
+#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28
+
+#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16
+#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16
+#define IXGBE_FDIRIP6M_DIPM_SHIFT 16
+#define IXGBE_FDIRM_VLANID 0x00000001
+#define IXGBE_FDIRM_VLANP 0x00000002
+#define IXGBE_FDIRM_POOL 0x00000004
+#define IXGBE_FDIRM_L4P 0x00000008
+#define IXGBE_FDIRM_FLEX 0x00000010
+#define IXGBE_FDIRM_DIPv6 0x00000020
+
+#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF
+#define IXGBE_FDIRFREE_FREE_SHIFT 0
+#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000
+#define IXGBE_FDIRFREE_COLL_SHIFT 16
+#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F
+#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0
+#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000
+#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16
+#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF
+#define IXGBE_FDIRUSTAT_ADD_SHIFT 0
+#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000
+#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16
+#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF
+#define IXGBE_FDIRFSTAT_FADD_SHIFT 0
+#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00
+#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8
+#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16
+#define IXGBE_FDIRVLAN_FLEX_SHIFT 16
+#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15
+#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16
+
+#define IXGBE_FDIRCMD_CMD_MASK 0x00000003
+#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001
+#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002
+#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003
+#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004
+#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008
+#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010
+#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020
+#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040
+#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060
+#define IXGBE_FDIRCMD_IPV6 0x00000080
+#define IXGBE_FDIRCMD_CLEARHT 0x00000100
+#define IXGBE_FDIRCMD_DROP 0x00000200
+#define IXGBE_FDIRCMD_INT 0x00000400
+#define IXGBE_FDIRCMD_LAST 0x00000800
+#define IXGBE_FDIRCMD_COLLISION 0x00001000
+#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000
+#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5
+#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16
+#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24
+#define IXGBE_FDIR_INIT_DONE_POLL 10
+#define IXGBE_FDIRCMD_CMD_POLL 10
+
+#define IXGBE_FDIR_DROP_QUEUE 127
+
+/* Manageablility Host Interface defines */
+#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
+#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
+#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */
+
+/* CEM Support */
+#define FW_CEM_HDR_LEN 0x4
+#define FW_CEM_CMD_DRIVER_INFO 0xDD
+#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5
+#define FW_CEM_CMD_RESERVED 0x0
+#define FW_CEM_UNUSED_VER 0x0
+#define FW_CEM_MAX_RETRIES 3
+#define FW_CEM_RESP_STATUS_SUCCESS 0x1
+
+/* Host Interface Command Structures */
+struct ixgbe_hic_hdr {
+ u8 cmd;
+ u8 buf_len;
+ union {
+ u8 cmd_resv;
+ u8 ret_status;
+ } cmd_or_resp;
+ u8 checksum;
+};
+
+struct ixgbe_hic_drv_info {
+ struct ixgbe_hic_hdr hdr;
+ u8 port_num;
+ u8 ver_sub;
+ u8 ver_build;
+ u8 ver_min;
+ u8 ver_maj;
+ u8 pad; /* end spacing to ensure length is mult. of dword */
+ u16 pad2; /* end spacing to ensure length is mult. of dword2 */
+};
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ __le32 data;
+ struct {
+ __le16 pkt_info; /* RSS, Pkt type */
+ __le16 hdr_info; /* Splithdr, hdrlen */
+ } hs_rss;
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */
+#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */
+#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */
+#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */
+#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
+#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
+#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */
+#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */
+#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */
+#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/
+#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
+#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
+#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */
+#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */
+#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */
+#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */
+#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation: End */
+#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation: Start */
+#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */
+#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */
+#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */
+#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */
+#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_UNKNOWN 0
+#define IXGBE_LINK_SPEED_100_FULL 0x0008
+#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
+#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
+#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \
+ IXGBE_LINK_SPEED_1GB_FULL | \
+ IXGBE_LINK_SPEED_10GB_FULL)
+
+
+/* Physical layer type */
+typedef u32 ixgbe_physical_layer;
+#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0
+#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001
+#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002
+#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004
+#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010
+#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020
+#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080
+#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100
+#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
+#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
+#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800
+#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
+#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
+
+/* Flow Control Macros */
+#define PAUSE_RTT 8
+#define PAUSE_MTU(MTU) ((MTU + 1024 - 1) / 1024)
+
+#define FC_HIGH_WATER(MTU) ((((PAUSE_RTT + PAUSE_MTU(MTU)) * 144) + 99) / 100 +\
+ PAUSE_MTU(MTU))
+#define FC_LOW_WATER(MTU) (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
+
+/* Software ATR hash keys */
+#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
+#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
+
+/* Software ATR input stream values and masks */
+#define IXGBE_ATR_HASH_MASK 0x7fff
+#define IXGBE_ATR_L4TYPE_MASK 0x3
+#define IXGBE_ATR_L4TYPE_UDP 0x1
+#define IXGBE_ATR_L4TYPE_TCP 0x2
+#define IXGBE_ATR_L4TYPE_SCTP 0x3
+#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
+enum ixgbe_atr_flow_type {
+ IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0,
+ IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1,
+ IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2,
+ IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
+ IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4,
+ IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5,
+ IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6,
+ IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
+};
+
+/* Flow Director ATR input struct. */
+union ixgbe_atr_input {
+ /*
+ * Byte layout in order, all values with MSB first:
+ *
+ * vm_pool - 1 byte
+ * flow_type - 1 byte
+ * vlan_id - 2 bytes
+ * src_ip - 16 bytes
+ * dst_ip - 16 bytes
+ * src_port - 2 bytes
+ * dst_port - 2 bytes
+ * flex_bytes - 2 bytes
+ * bkt_hash - 2 bytes
+ */
+ struct {
+ u8 vm_pool;
+ u8 flow_type;
+ __be16 vlan_id;
+ __be32 dst_ip[4];
+ __be32 src_ip[4];
+ __be16 src_port;
+ __be16 dst_port;
+ __be16 flex_bytes;
+ __be16 bkt_hash;
+ } formatted;
+ __be32 dword_stream[11];
+};
+
+/* Flow Director compressed ATR hash input struct */
+union ixgbe_atr_hash_dword {
+ struct {
+ u8 vm_pool;
+ u8 flow_type;
+ __be16 vlan_id;
+ } formatted;
+ __be32 ip;
+ struct {
+ __be16 src;
+ __be16 dst;
+ } port;
+ __be16 flex_bytes;
+ __be32 dword;
+};
+
+enum ixgbe_eeprom_type {
+ ixgbe_eeprom_uninitialized = 0,
+ ixgbe_eeprom_spi,
+ ixgbe_flash,
+ ixgbe_eeprom_none /* No NVM support */
+};
+
+enum ixgbe_mac_type {
+ ixgbe_mac_unknown = 0,
+ ixgbe_mac_82598EB,
+ ixgbe_mac_82599EB,
+ ixgbe_mac_X540,
+ ixgbe_num_macs
+};
+
+enum ixgbe_phy_type {
+ ixgbe_phy_unknown = 0,
+ ixgbe_phy_none,
+ ixgbe_phy_tn,
+ ixgbe_phy_aq,
+ ixgbe_phy_cu_unknown,
+ ixgbe_phy_qt,
+ ixgbe_phy_xaui,
+ ixgbe_phy_nl,
+ ixgbe_phy_sfp_passive_tyco,
+ ixgbe_phy_sfp_passive_unknown,
+ ixgbe_phy_sfp_active_unknown,
+ ixgbe_phy_sfp_avago,
+ ixgbe_phy_sfp_ftl,
+ ixgbe_phy_sfp_ftl_active,
+ ixgbe_phy_sfp_unknown,
+ ixgbe_phy_sfp_intel,
+ ixgbe_phy_sfp_unsupported,
+ ixgbe_phy_generic
+};
+
+/*
+ * SFP+ module type IDs:
+ *
+ * ID Module Type
+ * =============
+ * 0 SFP_DA_CU
+ * 1 SFP_SR
+ * 2 SFP_LR
+ * 3 SFP_DA_CU_CORE0 - 82599-specific
+ * 4 SFP_DA_CU_CORE1 - 82599-specific
+ * 5 SFP_SR/LR_CORE0 - 82599-specific
+ * 6 SFP_SR/LR_CORE1 - 82599-specific
+ */
+enum ixgbe_sfp_type {
+ ixgbe_sfp_type_da_cu = 0,
+ ixgbe_sfp_type_sr = 1,
+ ixgbe_sfp_type_lr = 2,
+ ixgbe_sfp_type_da_cu_core0 = 3,
+ ixgbe_sfp_type_da_cu_core1 = 4,
+ ixgbe_sfp_type_srlr_core0 = 5,
+ ixgbe_sfp_type_srlr_core1 = 6,
+ ixgbe_sfp_type_da_act_lmt_core0 = 7,
+ ixgbe_sfp_type_da_act_lmt_core1 = 8,
+ ixgbe_sfp_type_1g_cu_core0 = 9,
+ ixgbe_sfp_type_1g_cu_core1 = 10,
+ ixgbe_sfp_type_not_present = 0xFFFE,
+ ixgbe_sfp_type_unknown = 0xFFFF
+};
+
+enum ixgbe_media_type {
+ ixgbe_media_type_unknown = 0,
+ ixgbe_media_type_fiber,
+ ixgbe_media_type_fiber_lco,
+ ixgbe_media_type_copper,
+ ixgbe_media_type_backplane,
+ ixgbe_media_type_cx4,
+ ixgbe_media_type_virtual
+};
+
+/* Flow Control Settings */
+enum ixgbe_fc_mode {
+ ixgbe_fc_none = 0,
+ ixgbe_fc_rx_pause,
+ ixgbe_fc_tx_pause,
+ ixgbe_fc_full,
+#ifdef CONFIG_DCB
+ ixgbe_fc_pfc,
+#endif
+ ixgbe_fc_default
+};
+
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES 3
+enum ixgbe_smart_speed {
+ ixgbe_smart_speed_auto = 0,
+ ixgbe_smart_speed_on,
+ ixgbe_smart_speed_off
+};
+
+/* PCI bus types */
+enum ixgbe_bus_type {
+ ixgbe_bus_type_unknown = 0,
+ ixgbe_bus_type_pci,
+ ixgbe_bus_type_pcix,
+ ixgbe_bus_type_pci_express,
+ ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+ ixgbe_bus_speed_unknown = 0,
+ ixgbe_bus_speed_33 = 33,
+ ixgbe_bus_speed_66 = 66,
+ ixgbe_bus_speed_100 = 100,
+ ixgbe_bus_speed_120 = 120,
+ ixgbe_bus_speed_133 = 133,
+ ixgbe_bus_speed_2500 = 2500,
+ ixgbe_bus_speed_5000 = 5000,
+ ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+ ixgbe_bus_width_unknown = 0,
+ ixgbe_bus_width_pcie_x1 = 1,
+ ixgbe_bus_width_pcie_x2 = 2,
+ ixgbe_bus_width_pcie_x4 = 4,
+ ixgbe_bus_width_pcie_x8 = 8,
+ ixgbe_bus_width_32 = 32,
+ ixgbe_bus_width_64 = 64,
+ ixgbe_bus_width_reserved
+};
+
+struct ixgbe_addr_filter_info {
+ u32 num_mc_addrs;
+ u32 rar_used_count;
+ u32 mta_in_use;
+ u32 overflow_promisc;
+ bool uc_set_promisc;
+ bool user_set_promisc;
+};
+
+/* Bus parameters */
+struct ixgbe_bus_info {
+ enum ixgbe_bus_speed speed;
+ enum ixgbe_bus_width width;
+ enum ixgbe_bus_type type;
+
+ u16 func;
+ u16 lan_id;
+};
+
+/* Flow control parameters */
+struct ixgbe_fc_info {
+ u32 high_water; /* Flow Control High-water */
+ u32 low_water; /* Flow Control Low-water */
+ u16 pause_time; /* Flow Control Pause timer */
+ bool send_xon; /* Flow control send XON */
+ bool strict_ieee; /* Strict IEEE mode */
+ bool disable_fc_autoneg; /* Do not autonegotiate FC */
+ bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
+ enum ixgbe_fc_mode current_mode; /* FC mode in effect */
+ enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
+};
+
+/* Statistics counters collected by the MAC */
+struct ixgbe_hw_stats {
+ u64 crcerrs;
+ u64 illerrc;
+ u64 errbc;
+ u64 mspdc;
+ u64 mpctotal;
+ u64 mpc[8];
+ u64 mlfc;
+ u64 mrfc;
+ u64 rlec;
+ u64 lxontxc;
+ u64 lxonrxc;
+ u64 lxofftxc;
+ u64 lxoffrxc;
+ u64 pxontxc[8];
+ u64 pxonrxc[8];
+ u64 pxofftxc[8];
+ u64 pxoffrxc[8];
+ u64 prc64;
+ u64 prc127;
+ u64 prc255;
+ u64 prc511;
+ u64 prc1023;
+ u64 prc1522;
+ u64 gprc;
+ u64 bprc;
+ u64 mprc;
+ u64 gptc;
+ u64 gorc;
+ u64 gotc;
+ u64 rnbc[8];
+ u64 ruc;
+ u64 rfc;
+ u64 roc;
+ u64 rjc;
+ u64 mngprc;
+ u64 mngpdc;
+ u64 mngptc;
+ u64 tor;
+ u64 tpr;
+ u64 tpt;
+ u64 ptc64;
+ u64 ptc127;
+ u64 ptc255;
+ u64 ptc511;
+ u64 ptc1023;
+ u64 ptc1522;
+ u64 mptc;
+ u64 bptc;
+ u64 xec;
+ u64 rqsmr[16];
+ u64 tqsmr[8];
+ u64 qprc[16];
+ u64 qptc[16];
+ u64 qbrc[16];
+ u64 qbtc[16];
+ u64 qprdc[16];
+ u64 pxon2offc[8];
+ u64 fdirustat_add;
+ u64 fdirustat_remove;
+ u64 fdirfstat_fadd;
+ u64 fdirfstat_fremove;
+ u64 fdirmatch;
+ u64 fdirmiss;
+ u64 fccrc;
+ u64 fcoerpdc;
+ u64 fcoeprc;
+ u64 fcoeptc;
+ u64 fcoedwrc;
+ u64 fcoedwtc;
+ u64 b2ospc;
+ u64 b2ogprc;
+ u64 o2bgptc;
+ u64 o2bspc;
+};
+
+/* forward declaration */
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+ u32 *vmdq);
+
+/* Function pointer table */
+struct ixgbe_eeprom_operations {
+ s32 (*init_params)(struct ixgbe_hw *);
+ s32 (*read)(struct ixgbe_hw *, u16, u16 *);
+ s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+ s32 (*write)(struct ixgbe_hw *, u16, u16);
+ s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
+ s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
+ s32 (*update_checksum)(struct ixgbe_hw *);
+ u16 (*calc_checksum)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mac_operations {
+ s32 (*init_hw)(struct ixgbe_hw *);
+ s32 (*reset_hw)(struct ixgbe_hw *);
+ s32 (*start_hw)(struct ixgbe_hw *);
+ s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+ enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+ u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+ s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+ s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
+ s32 (*stop_adapter)(struct ixgbe_hw *);
+ s32 (*get_bus_info)(struct ixgbe_hw *);
+ void (*set_lan_id)(struct ixgbe_hw *);
+ s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
+ s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
+ s32 (*setup_sfp)(struct ixgbe_hw *);
+ s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
+ s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16);
+ void (*release_swfw_sync)(struct ixgbe_hw *, u16);
+
+ /* Link */
+ void (*disable_tx_laser)(struct ixgbe_hw *);
+ void (*enable_tx_laser)(struct ixgbe_hw *);
+ void (*flap_tx_laser)(struct ixgbe_hw *);
+ s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+ s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+ bool *);
+
+ /* Packet Buffer Manipulation */
+ void (*set_rxpba)(struct ixgbe_hw *, int, u32, int);
+
+ /* LED */
+ s32 (*led_on)(struct ixgbe_hw *, u32);
+ s32 (*led_off)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_start)(struct ixgbe_hw *, u32);
+ s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
+
+ /* RAR, Multicast, VLAN */
+ s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
+ s32 (*clear_rar)(struct ixgbe_hw *, u32);
+ s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
+ s32 (*init_rx_addrs)(struct ixgbe_hw *);
+ s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
+ s32 (*enable_mc)(struct ixgbe_hw *);
+ s32 (*disable_mc)(struct ixgbe_hw *);
+ s32 (*clear_vfta)(struct ixgbe_hw *);
+ s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+ s32 (*init_uta_tables)(struct ixgbe_hw *);
+ void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
+ void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
+
+ /* Flow Control */
+ s32 (*fc_enable)(struct ixgbe_hw *, s32);
+
+ /* Manageability interface */
+ s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+};
+
+struct ixgbe_phy_operations {
+ s32 (*identify)(struct ixgbe_hw *);
+ s32 (*identify_sfp)(struct ixgbe_hw *);
+ s32 (*init)(struct ixgbe_hw *);
+ s32 (*reset)(struct ixgbe_hw *);
+ s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+ s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
+ s32 (*setup_link)(struct ixgbe_hw *);
+ s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
+ bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
+ s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
+ s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
+ s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
+ s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
+ s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
+ s32 (*check_overtemp)(struct ixgbe_hw *);
+};
+
+struct ixgbe_eeprom_info {
+ struct ixgbe_eeprom_operations ops;
+ enum ixgbe_eeprom_type type;
+ u32 semaphore_delay;
+ u16 word_size;
+ u16 address_bits;
+ u16 word_page_size;
+};
+
+#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01
+struct ixgbe_mac_info {
+ struct ixgbe_mac_operations ops;
+ enum ixgbe_mac_type type;
+ u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+ /* prefix for World Wide Node Name (WWNN) */
+ u16 wwnn_prefix;
+ /* prefix for World Wide Port Name (WWPN) */
+ u16 wwpn_prefix;
+#define IXGBE_MAX_MTA 128
+ u32 mta_shadow[IXGBE_MAX_MTA];
+ s32 mc_filter_type;
+ u32 mcft_size;
+ u32 vft_size;
+ u32 num_rar_entries;
+ u32 rar_highwater;
+ u32 rx_pb_size;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ u32 max_msix_vectors;
+ u32 orig_autoc;
+ u32 orig_autoc2;
+ bool orig_link_settings_stored;
+ bool autotry_restart;
+ u8 flags;
+};
+
+struct ixgbe_phy_info {
+ struct ixgbe_phy_operations ops;
+ struct mdio_if_info mdio;
+ enum ixgbe_phy_type type;
+ u32 id;
+ enum ixgbe_sfp_type sfp_type;
+ bool sfp_setup_needed;
+ u32 revision;
+ enum ixgbe_media_type media_type;
+ bool reset_disable;
+ ixgbe_autoneg_advertised autoneg_advertised;
+ enum ixgbe_smart_speed smart_speed;
+ bool smart_speed_active;
+ bool multispeed_fiber;
+ bool reset_if_overtemp;
+};
+
+#include "ixgbe_mbx.h"
+
+struct ixgbe_mbx_operations {
+ s32 (*init_params)(struct ixgbe_hw *hw);
+ s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
+ s32 (*check_for_msg)(struct ixgbe_hw *, u16);
+ s32 (*check_for_ack)(struct ixgbe_hw *, u16);
+ s32 (*check_for_rst)(struct ixgbe_hw *, u16);
+};
+
+struct ixgbe_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+ struct ixgbe_mbx_operations ops;
+ struct ixgbe_mbx_stats stats;
+ u32 timeout;
+ u32 usec_delay;
+ u32 v2p_mailbox;
+ u16 size;
+};
+
+struct ixgbe_hw {
+ u8 __iomem *hw_addr;
+ void *back;
+ struct ixgbe_mac_info mac;
+ struct ixgbe_addr_filter_info addr_ctrl;
+ struct ixgbe_fc_info fc;
+ struct ixgbe_phy_info phy;
+ struct ixgbe_eeprom_info eeprom;
+ struct ixgbe_bus_info bus;
+ struct ixgbe_mbx_info mbx;
+ u16 device_id;
+ u16 vendor_id;
+ u16 subsystem_device_id;
+ u16 subsystem_vendor_id;
+ u8 revision_id;
+ bool adapter_stopped;
+ bool force_full_reset;
+};
+
+struct ixgbe_info {
+ enum ixgbe_mac_type mac;
+ s32 (*get_invariants)(struct ixgbe_hw *);
+ struct ixgbe_mac_operations *mac_ops;
+ struct ixgbe_eeprom_operations *eeprom_ops;
+ struct ixgbe_phy_operations *phy_ops;
+ struct ixgbe_mbx_operations *mbx_ops;
+};
+
+
+/* Error Codes */
+#define IXGBE_ERR_EEPROM -1
+#define IXGBE_ERR_EEPROM_CHECKSUM -2
+#define IXGBE_ERR_PHY -3
+#define IXGBE_ERR_CONFIG -4
+#define IXGBE_ERR_PARAM -5
+#define IXGBE_ERR_MAC_TYPE -6
+#define IXGBE_ERR_UNKNOWN_PHY -7
+#define IXGBE_ERR_LINK_SETUP -8
+#define IXGBE_ERR_ADAPTER_STOPPED -9
+#define IXGBE_ERR_INVALID_MAC_ADDR -10
+#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11
+#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12
+#define IXGBE_ERR_INVALID_LINK_SETTINGS -13
+#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14
+#define IXGBE_ERR_RESET_FAILED -15
+#define IXGBE_ERR_SWFW_SYNC -16
+#define IXGBE_ERR_PHY_ADDR_INVALID -17
+#define IXGBE_ERR_I2C -18
+#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
+#define IXGBE_ERR_SFP_NOT_PRESENT -20
+#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21
+#define IXGBE_ERR_NO_SAN_ADDR_PTR -22
+#define IXGBE_ERR_FDIR_REINIT_FAILED -23
+#define IXGBE_ERR_EEPROM_VERSION -24
+#define IXGBE_ERR_NO_SPACE -25
+#define IXGBE_ERR_OVERTEMP -26
+#define IXGBE_ERR_FC_NOT_NEGOTIATED -27
+#define IXGBE_ERR_FC_NOT_SUPPORTED -28
+#define IXGBE_ERR_FLOW_CONTROL -29
+#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30
+#define IXGBE_ERR_PBA_SECTION -31
+#define IXGBE_ERR_INVALID_ARGUMENT -32
+#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33
+#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
+
+#endif /* _IXGBE_TYPE_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 10 Gigabit PCI Express Linux driver
+ Copyright(c) 1999 - 2011 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+
+#include "ixgbe.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_X540_MAX_TX_QUEUES 128
+#define IXGBE_X540_MAX_RX_QUEUES 128
+#define IXGBE_X540_RAR_ENTRIES 128
+#define IXGBE_X540_MC_TBL_SIZE 128
+#define IXGBE_X540_VFT_TBL_SIZE 128
+#define IXGBE_X540_RX_PB_SIZE 384
+
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
+
+static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
+{
+ return ixgbe_media_type_copper;
+}
+
+static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mac_info *mac = &hw->mac;
+
+ /* Call PHY identify routine to get the phy type */
+ ixgbe_identify_phy_generic(hw);
+
+ mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
+ mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
+ mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
+ mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
+ mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
+ * @hw: pointer to hardware structure
+ * @speed: new link speed
+ * @autoneg: true if autonegotiation enabled
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ **/
+static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ return hw->phy.ops.setup_link_speed(hw, speed, autoneg,
+ autoneg_wait_to_complete);
+}
+
+/**
+ * ixgbe_reset_hw_X540 - Perform hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by resetting the transmit and receive units, masks
+ * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
+ * reset.
+ **/
+static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
+{
+ ixgbe_link_speed link_speed;
+ s32 status = 0;
+ u32 ctrl;
+ u32 ctrl_ext;
+ u32 reset_bit;
+ u32 i;
+ u32 autoc;
+ u32 autoc2;
+ bool link_up = false;
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ /*
+ * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+ * access and verify no pending requests before reset
+ */
+ ixgbe_disable_pcie_master(hw);
+
+mac_reset_top:
+ /*
+ * Issue global reset to the MAC. Needs to be SW reset if link is up.
+ * If link reset is used when link is up, it might reset the PHY when
+ * mng is using it. If link is down or the flag to force full link
+ * reset is set, then perform link reset.
+ */
+ if (hw->force_full_reset) {
+ reset_bit = IXGBE_CTRL_LNK_RST;
+ } else {
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+ if (!link_up)
+ reset_bit = IXGBE_CTRL_LNK_RST;
+ else
+ reset_bit = IXGBE_CTRL_RST;
+ }
+
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Poll for reset bit to self-clear indicating reset is complete */
+ for (i = 0; i < 10; i++) {
+ udelay(1);
+ ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+ if (!(ctrl & reset_bit))
+ break;
+ }
+ if (ctrl & reset_bit) {
+ status = IXGBE_ERR_RESET_FAILED;
+ hw_dbg(hw, "Reset polling failed to complete.\n");
+ }
+
+ /*
+ * Double resets are required for recovery from certain error
+ * conditions. Between resets, it is necessary to stall to allow time
+ * for any pending HW events to complete. We use 1usec since that is
+ * what is needed for ixgbe_disable_pcie_master(). The second reset
+ * then clears out any effects of those events.
+ */
+ if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
+ hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
+ udelay(1);
+ goto mac_reset_top;
+ }
+
+ /* Clear PF Reset Done bit so PF/VF Mail Ops can work */
+ ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+ ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
+ IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+ IXGBE_WRITE_FLUSH(hw);
+
+ msleep(50);
+
+ /* Set the Rx packet buffer size. */
+ IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /*
+ * Store the original AUTOC/AUTOC2 values if they have not been
+ * stored off yet. Otherwise restore the stored original
+ * values since the reset operation sets back to defaults.
+ */
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+ autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ if (hw->mac.orig_link_settings_stored == false) {
+ hw->mac.orig_autoc = autoc;
+ hw->mac.orig_autoc2 = autoc2;
+ hw->mac.orig_link_settings_stored = true;
+ } else {
+ if (autoc != hw->mac.orig_autoc)
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
+ IXGBE_AUTOC_AN_RESTART));
+
+ if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
+ (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
+ autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
+ autoc2 |= (hw->mac.orig_autoc2 &
+ IXGBE_AUTOC2_UPPER_MASK);
+ IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
+ }
+ }
+
+ /*
+ * Store MAC address from RAR0, clear receive address registers, and
+ * clear the multicast table. Also reset num_rar_entries to 128,
+ * since we modify this value when programming the SAN MAC address.
+ */
+ hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES;
+ hw->mac.ops.init_rx_addrs(hw);
+
+ /* Store the permanent mac address */
+ hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
+
+ /* Store the permanent SAN mac address */
+ hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
+
+ /* Add the SAN MAC address to the RAR only if it's a valid address */
+ if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
+ hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
+ hw->mac.san_addr, 0, IXGBE_RAH_AV);
+
+ /* Reserve the last RAR for the SAN MAC address */
+ hw->mac.num_rar_entries--;
+ }
+
+ /* Store the alternative WWNN/WWPN prefix */
+ hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+ &hw->mac.wwpn_prefix);
+
+ return status;
+}
+
+/**
+ * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware using the generic start_hw function
+ * and the generation start_hw function.
+ * Then performs revision-specific operations, if any.
+ **/
+static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
+{
+ s32 ret_val = 0;
+
+ ret_val = ixgbe_start_hw_generic(hw);
+ if (ret_val != 0)
+ goto out;
+
+ ret_val = ixgbe_start_hw_gen2(hw);
+ hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
+out:
+ return ret_val;
+}
+
+/**
+ * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current configuration.
+ **/
+static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u16 ext_ability = 0;
+
+ hw->phy.ops.identify(hw);
+
+ hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
+ &ext_ability);
+ if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
+ physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
+
+ return physical_layer;
+}
+
+/**
+ * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
+ * @hw: pointer to hardware structure
+ *
+ * Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ * ixgbe_hw struct in order to set up EEPROM access.
+ **/
+static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
+{
+ struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+ u32 eec;
+ u16 eeprom_size;
+
+ if (eeprom->type == ixgbe_eeprom_uninitialized) {
+ eeprom->semaphore_delay = 10;
+ eeprom->type = ixgbe_flash;
+
+ eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+ eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+ IXGBE_EEC_SIZE_SHIFT);
+ eeprom->word_size = 1 << (eeprom_size +
+ IXGBE_EEPROM_WORD_SIZE_SHIFT);
+
+ hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
+ eeprom->type, eeprom->word_size);
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbe_read_eerd_X540- Read EEPROM word using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @data: word read from the EEPROM
+ *
+ * Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
+ status = ixgbe_read_eerd_generic(hw, offset, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to read
+ * @words: number of words
+ * @data: word(s) read from the EEPROM
+ *
+ * Reads a 16 bit word(s) from the EEPROM using the EERD register.
+ **/
+static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
+ status = ixgbe_read_eerd_buffer_generic(hw, offset,
+ words, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @data: word write to the EEPROM
+ *
+ * Write a 16 bit word to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
+ status = ixgbe_write_eewr_generic(hw, offset, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
+ * @hw: pointer to hardware structure
+ * @offset: offset of word in the EEPROM to write
+ * @words: number of words
+ * @data: word(s) write to the EEPROM
+ *
+ * Write a 16 bit word(s) to the EEPROM using the EEWR register.
+ **/
+static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
+ u16 offset, u16 words, u16 *data)
+{
+ s32 status = 0;
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
+ 0)
+ status = ixgbe_write_eewr_buffer_generic(hw, offset,
+ words, data);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+ return status;
+}
+
+/**
+ * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
+ *
+ * This function does not use synchronization for EERD and EEWR. It can
+ * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
+ *
+ * @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ u16 i;
+ u16 j;
+ u16 checksum = 0;
+ u16 length = 0;
+ u16 pointer = 0;
+ u16 word = 0;
+
+ /*
+ * Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores here. Instead use
+ * ixgbe_read_eerd_generic
+ */
+
+ /* Include 0x0-0x3F in the checksum */
+ for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+ if (ixgbe_read_eerd_generic(hw, i, &word) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+ checksum += word;
+ }
+
+ /*
+ * Include all data from pointers 0x3, 0x6-0xE. This excludes the
+ * FW, PHY module, and PCIe Expansion/Option ROM pointers.
+ */
+ for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+ if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+
+ /* Skip pointer section if the pointer is invalid. */
+ if (pointer == 0xFFFF || pointer == 0 ||
+ pointer >= hw->eeprom.word_size)
+ continue;
+
+ if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+
+ /* Skip pointer section if length is invalid. */
+ if (length == 0xFFFF || length == 0 ||
+ (pointer + length) >= hw->eeprom.word_size)
+ continue;
+
+ for (j = pointer+1; j <= pointer+length; j++) {
+ if (ixgbe_read_eerd_generic(hw, j, &word) != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ break;
+ }
+ checksum += word;
+ }
+ }
+
+ checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+ return checksum;
+}
+
+/**
+ * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
+ * @hw: pointer to hardware structure
+ * @checksum_val: calculated checksum
+ *
+ * Performs checksum calculation and validates the EEPROM checksum. If the
+ * caller does not need checksum_val, the value can be NULL.
+ **/
+static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
+ u16 *checksum_val)
+{
+ s32 status;
+ u16 checksum;
+ u16 read_checksum = 0;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status != 0) {
+ hw_dbg(hw, "EEPROM read failed\n");
+ goto out;
+ }
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+
+ /*
+ * Do not use hw->eeprom.ops.read because we do not want to take
+ * the synchronization semaphores twice here.
+ */
+ ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ &read_checksum);
+
+ /*
+ * Verify read checksum from EEPROM is the same as
+ * calculated checksum
+ */
+ if (read_checksum != checksum)
+ status = IXGBE_ERR_EEPROM_CHECKSUM;
+
+ /* If the user cares, return the calculated checksum */
+ if (checksum_val)
+ *checksum_val = checksum;
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+out:
+ return status;
+}
+
+/**
+ * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
+ * @hw: pointer to hardware structure
+ *
+ * After writing EEPROM to shadow RAM using EEWR register, software calculates
+ * checksum and updates the EEPROM and instructs the hardware to update
+ * the flash.
+ **/
+static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
+{
+ s32 status;
+ u16 checksum;
+
+ /*
+ * Read the first word from the EEPROM. If this times out or fails, do
+ * not continue or we could be in for a very long wait while every
+ * EEPROM read fails
+ */
+ status = hw->eeprom.ops.read(hw, 0, &checksum);
+
+ if (status != 0)
+ hw_dbg(hw, "EEPROM read failed\n");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
+ checksum = hw->eeprom.ops.calc_checksum(hw);
+
+ /*
+ * Do not use hw->eeprom.ops.write because we do not want to
+ * take the synchronization semaphores twice here.
+ */
+ status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM,
+ checksum);
+
+ if (status == 0)
+ status = ixgbe_update_flash_X540(hw);
+ else
+ status = IXGBE_ERR_SWFW_SYNC;
+ }
+
+ hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+
+ return status;
+}
+
+/**
+ * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
+ * @hw: pointer to hardware structure
+ *
+ * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
+ * EEPROM from shadow RAM to the flash device.
+ **/
+static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
+{
+ u32 flup;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == IXGBE_ERR_EEPROM) {
+ hw_dbg(hw, "Flash update time out\n");
+ goto out;
+ }
+
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == 0)
+ hw_dbg(hw, "Flash update complete\n");
+ else
+ hw_dbg(hw, "Flash update time out\n");
+
+ if (hw->revision_id == 0) {
+ flup = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+ if (flup & IXGBE_EEC_SEC1VAL) {
+ flup |= IXGBE_EEC_FLUP;
+ IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
+ }
+
+ status = ixgbe_poll_flash_update_done_X540(hw);
+ if (status == 0)
+ hw_dbg(hw, "Flash update complete\n");
+ else
+ hw_dbg(hw, "Flash update time out\n");
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_poll_flash_update_done_X540 - Poll flash update status
+ * @hw: pointer to hardware structure
+ *
+ * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
+ * flash update is done.
+ **/
+static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
+{
+ u32 i;
+ u32 reg;
+ s32 status = IXGBE_ERR_EEPROM;
+
+ for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
+ reg = IXGBE_READ_REG(hw, IXGBE_EEC);
+ if (reg & IXGBE_EEC_FLUDONE) {
+ status = 0;
+ break;
+ }
+ udelay(5);
+ }
+ return status;
+}
+
+/**
+ * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to acquire
+ *
+ * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
+ * the specified function (CSR, PHY0, PHY1, NVM, Flash)
+ **/
+static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+ u32 fwmask = mask << 5;
+ u32 hwmask = 0;
+ u32 timeout = 200;
+ u32 i;
+
+ if (swmask == IXGBE_GSSR_EEP_SM)
+ hwmask = IXGBE_GSSR_FLASH_SM;
+
+ for (i = 0; i < timeout; i++) {
+ /*
+ * SW NVM semaphore bit is used for access to all
+ * SW_FW_SYNC bits (not just NVM)
+ */
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (!(swfw_sync & (fwmask | swmask | hwmask))) {
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ break;
+ } else {
+ /*
+ * Firmware currently using resource (fwmask),
+ * hardware currently using resource (hwmask),
+ * or other software thread currently using
+ * resource (swmask)
+ */
+ ixgbe_release_swfw_sync_semaphore(hw);
+ usleep_range(5000, 10000);
+ }
+ }
+
+ /*
+ * If the resource is not released by the FW/HW the SW can assume that
+ * the FW/HW malfunctions. In that case the SW should sets the
+ * SW bit(s) of the requested resource(s) while ignoring the
+ * corresponding FW/HW bits in the SW_FW_SYNC register.
+ */
+ if (i >= timeout) {
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (swfw_sync & (fwmask | hwmask)) {
+ if (ixgbe_get_swfw_sync_semaphore(hw))
+ return IXGBE_ERR_SWFW_SYNC;
+
+ swfw_sync |= swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+ ixgbe_release_swfw_sync_semaphore(hw);
+ }
+ }
+
+ usleep_range(5000, 10000);
+ return 0;
+}
+
+/**
+ * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
+ * @hw: pointer to hardware structure
+ * @mask: Mask to specify which semaphore to release
+ *
+ * Releases the SWFW semaphore through the SW_FW_SYNC register
+ * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
+ **/
+static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
+{
+ u32 swfw_sync;
+ u32 swmask = mask;
+
+ ixgbe_get_swfw_sync_semaphore(hw);
+
+ swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ swfw_sync &= ~swmask;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
+
+ ixgbe_release_swfw_sync_semaphore(hw);
+ usleep_range(5000, 10000);
+}
+
+/**
+ * ixgbe_get_nvm_semaphore - Get hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * Sets the hardware semaphores so SW/FW can gain control of shared resources
+ **/
+static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_EEPROM;
+ u32 timeout = 2000;
+ u32 i;
+ u32 swsm;
+
+ /* Get SMBI software semaphore between device drivers first */
+ for (i = 0; i < timeout; i++) {
+ /*
+ * If the SMBI bit is 0 when we read it, then the bit will be
+ * set and we have the semaphore
+ */
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ if (!(swsm & IXGBE_SWSM_SMBI)) {
+ status = 0;
+ break;
+ }
+ udelay(50);
+ }
+
+ /* Now get the semaphore between SW/FW through the REGSMP bit */
+ if (status) {
+ for (i = 0; i < timeout; i++) {
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ if (!(swsm & IXGBE_SWFW_REGSMP))
+ break;
+
+ udelay(50);
+ }
+ } else {
+ hw_dbg(hw, "Software semaphore SMBI between device drivers "
+ "not granted.\n");
+ }
+
+ return status;
+}
+
+/**
+ * ixgbe_release_nvm_semaphore - Release hardware semaphore
+ * @hw: pointer to hardware structure
+ *
+ * This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
+{
+ u32 swsm;
+
+ /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+ swsm &= ~IXGBE_SWSM_SMBI;
+ IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+ swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
+ swsm &= ~IXGBE_SWFW_REGSMP;
+ IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
+
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbe_blink_led_start_X540 - Blink LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to blink
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ /*
+ * In order for the blink bit in the LED control register
+ * to work, link and speed must be forced in the MAC. We
+ * will reverse this when we stop the blinking.
+ */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+
+ /* Set the LED to LINK_UP + BLINK. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+
+/**
+ * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
+ * @hw: pointer to hardware structure
+ * @index: led number to stop blinking
+ *
+ * Devices that implement the version 2 interface:
+ * X540
+ **/
+static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
+{
+ u32 macc_reg;
+ u32 ledctl_reg;
+
+ /* Restore the LED to its default value. */
+ ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+ ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
+ ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
+ ledctl_reg &= ~IXGBE_LED_BLINK(index);
+ IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
+
+ /* Unforce link and speed in the MAC. */
+ macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
+ macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
+ IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
+ IXGBE_WRITE_FLUSH(hw);
+
+ return 0;
+}
+static struct ixgbe_mac_operations mac_ops_X540 = {
+ .init_hw = &ixgbe_init_hw_generic,
+ .reset_hw = &ixgbe_reset_hw_X540,
+ .start_hw = &ixgbe_start_hw_X540,
+ .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
+ .get_media_type = &ixgbe_get_media_type_X540,
+ .get_supported_physical_layer =
+ &ixgbe_get_supported_physical_layer_X540,
+ .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
+ .get_mac_addr = &ixgbe_get_mac_addr_generic,
+ .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
+ .get_device_caps = &ixgbe_get_device_caps_generic,
+ .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
+ .stop_adapter = &ixgbe_stop_adapter_generic,
+ .get_bus_info = &ixgbe_get_bus_info_generic,
+ .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
+ .read_analog_reg8 = NULL,
+ .write_analog_reg8 = NULL,
+ .setup_link = &ixgbe_setup_mac_link_X540,
+ .set_rxpba = &ixgbe_set_rxpba_generic,
+ .check_link = &ixgbe_check_mac_link_generic,
+ .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
+ .led_on = &ixgbe_led_on_generic,
+ .led_off = &ixgbe_led_off_generic,
+ .blink_led_start = &ixgbe_blink_led_start_X540,
+ .blink_led_stop = &ixgbe_blink_led_stop_X540,
+ .set_rar = &ixgbe_set_rar_generic,
+ .clear_rar = &ixgbe_clear_rar_generic,
+ .set_vmdq = &ixgbe_set_vmdq_generic,
+ .clear_vmdq = &ixgbe_clear_vmdq_generic,
+ .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
+ .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
+ .enable_mc = &ixgbe_enable_mc_generic,
+ .disable_mc = &ixgbe_disable_mc_generic,
+ .clear_vfta = &ixgbe_clear_vfta_generic,
+ .set_vfta = &ixgbe_set_vfta_generic,
+ .fc_enable = &ixgbe_fc_enable_generic,
+ .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
+ .init_uta_tables = &ixgbe_init_uta_tables_generic,
+ .setup_sfp = NULL,
+ .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
+ .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
+ .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540,
+ .release_swfw_sync = &ixgbe_release_swfw_sync_X540,
+};
+
+static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
+ .init_params = &ixgbe_init_eeprom_params_X540,
+ .read = &ixgbe_read_eerd_X540,
+ .read_buffer = &ixgbe_read_eerd_buffer_X540,
+ .write = &ixgbe_write_eewr_X540,
+ .write_buffer = &ixgbe_write_eewr_buffer_X540,
+ .calc_checksum = &ixgbe_calc_eeprom_checksum_X540,
+ .validate_checksum = &ixgbe_validate_eeprom_checksum_X540,
+ .update_checksum = &ixgbe_update_eeprom_checksum_X540,
+};
+
+static struct ixgbe_phy_operations phy_ops_X540 = {
+ .identify = &ixgbe_identify_phy_generic,
+ .identify_sfp = &ixgbe_identify_sfp_module_generic,
+ .init = NULL,
+ .reset = NULL,
+ .read_reg = &ixgbe_read_phy_reg_generic,
+ .write_reg = &ixgbe_write_phy_reg_generic,
+ .setup_link = &ixgbe_setup_phy_link_generic,
+ .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
+ .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
+ .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
+ .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
+ .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
+ .check_overtemp = &ixgbe_tn_check_overtemp,
+};
+
+struct ixgbe_info ixgbe_X540_info = {
+ .mac = ixgbe_mac_X540,
+ .get_invariants = &ixgbe_get_invariants_X540,
+ .mac_ops = &mac_ops_X540,
+ .eeprom_ops = &eeprom_ops_X540,
+ .phy_ops = &phy_ops_X540,
+ .mbx_ops = &mbx_ops_generic,
+};
--- /dev/null
+################################################################################
+#
+# Intel 82599 Virtual Function driver
+# Copyright(c) 1999 - 2010 Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc.,
+# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+#
+# The full GNU General Public License is included in this distribution in
+# the file called "COPYING".
+#
+# Contact Information:
+# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+#
+################################################################################
+
+#
+# Makefile for the Intel(R) 82599 VF ethernet driver
+#
+
+obj-$(CONFIG_IXGBEVF) += ixgbevf.o
+
+ixgbevf-objs := vf.o \
+ mbx.o \
+ ethtool.o \
+ ixgbevf_main.o
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_DEFINES_H_
+#define _IXGBEVF_DEFINES_H_
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82599_VF 0x10ED
+#define IXGBE_DEV_ID_X540_VF 0x1515
+
+#define IXGBE_VF_IRQ_CLEAR_MASK 7
+#define IXGBE_VF_MAX_TX_QUEUES 1
+#define IXGBE_VF_MAX_RX_QUEUES 1
+#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
+
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
+#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
+
+#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */
+#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_LINKS_UP 0x40000000
+#define IXGBE_LINKS_SPEED_82599 0x30000000
+#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
+#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
+
+#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
+#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
+#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
+#define IXGBE_RXDCTL_RLPML_EN 0x00008000
+
+/* DCA Control */
+#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
+
+/* PSRTYPE bit definitions */
+#define IXGBE_PSRTYPE_TCPHDR 0x00000010
+#define IXGBE_PSRTYPE_UDPHDR 0x00000020
+#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
+#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
+#define IXGBE_PSRTYPE_L2HDR 0x00001000
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
+#define IXGBE_SRRCTL_RDMTS_SHIFT 22
+#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
+#define IXGBE_SRRCTL_DROP_EN 0x10000000
+#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
+#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
+#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
+#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
+#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
+#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
+#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
+#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
+#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
+#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
+#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
+#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */
+#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */
+#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
+#define IXGBE_RXDADV_ERR_MASK 0xFFF00000 /* RDESC.ERRORS mask */
+#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
+#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
+#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT 13
+#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT 12
+
+#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
+#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
+#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
+#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
+#define IXGBE_RXDADV_STAT_MASK 0x000FFFFF /* Stat/NEXTP: bit 0-19 */
+#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */
+#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
+#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */
+#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
+#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */
+
+#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
+#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
+#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
+#define IXGBE_RXDADV_RSCCNT_SHIFT 17
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
+#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
+#define IXGBE_RXDADV_SPH 0x8000
+
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXD_ERR_CE | \
+ IXGBE_RXD_ERR_LE | \
+ IXGBE_RXD_ERR_PE | \
+ IXGBE_RXD_ERR_OSE | \
+ IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+ IXGBE_RXDADV_ERR_CE | \
+ IXGBE_RXDADV_ERR_LE | \
+ IXGBE_RXDADV_ERR_PE | \
+ IXGBE_RXDADV_ERR_OSE | \
+ IXGBE_RXDADV_ERR_USE)
+
+#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+ struct {
+ __le64 buffer_addr; /* Address of descriptor's data buf */
+ __le32 cmd_type_len;
+ __le32 olinfo_status;
+ } read;
+ struct {
+ __le64 rsvd; /* Reserved */
+ __le32 nxtseq_seed;
+ __le32 status;
+ } wb;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+ struct {
+ __le64 pkt_addr; /* Packet buffer address */
+ __le64 hdr_addr; /* Header buffer address */
+ } read;
+ struct {
+ struct {
+ union {
+ __le32 data;
+ struct {
+ __le16 pkt_info; /* RSS, Pkt type */
+ __le16 hdr_info; /* Splithdr, hdrlen */
+ } hs_rss;
+ } lo_dword;
+ union {
+ __le32 rss; /* RSS Hash */
+ struct {
+ __le16 ip_id; /* IP id */
+ __le16 csum; /* Packet Checksum */
+ } csum_ip;
+ } hi_dword;
+ } lower;
+ struct {
+ __le32 status_error; /* ext status/error */
+ __le16 length; /* Packet length */
+ __le16 vlan; /* VLAN tag */
+ } upper;
+ } wb; /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+ __le32 vlan_macip_lens;
+ __le32 seqnum_seed;
+ __le32 type_tucmd_mlhl;
+ __le32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
+#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
+#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
+#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+ IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
+#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
+#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+ IXGBE_EIMS_RTX_QUEUE | \
+ IXGBE_EIMS_MAILBOX | \
+ IXGBE_EIMS_OTHER)
+
+#define IXGBE_EITR_CNT_WDIS 0x80000000
+
+/* Error Codes */
+#define IXGBE_ERR_INVALID_MAC_ADDR -1
+#define IXGBE_ERR_RESET_FAILED -2
+
+#endif /* _IXGBEVF_DEFINES_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2009 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* ethtool support for ixgbevf */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/vmalloc.h>
+#include <linux/if_vlan.h>
+#include <linux/uaccess.h>
+
+#include "ixgbevf.h"
+
+#define IXGBE_ALL_RAR_ENTRIES 16
+
+#ifdef ETHTOOL_GSTATS
+struct ixgbe_stats {
+ char stat_string[ETH_GSTRING_LEN];
+ int sizeof_stat;
+ int stat_offset;
+ int base_stat_offset;
+ int saved_reset_offset;
+};
+
+#define IXGBEVF_STAT(m, b, r) sizeof(((struct ixgbevf_adapter *)0)->m), \
+ offsetof(struct ixgbevf_adapter, m), \
+ offsetof(struct ixgbevf_adapter, b), \
+ offsetof(struct ixgbevf_adapter, r)
+static struct ixgbe_stats ixgbe_gstrings_stats[] = {
+ {"rx_packets", IXGBEVF_STAT(stats.vfgprc, stats.base_vfgprc,
+ stats.saved_reset_vfgprc)},
+ {"tx_packets", IXGBEVF_STAT(stats.vfgptc, stats.base_vfgptc,
+ stats.saved_reset_vfgptc)},
+ {"rx_bytes", IXGBEVF_STAT(stats.vfgorc, stats.base_vfgorc,
+ stats.saved_reset_vfgorc)},
+ {"tx_bytes", IXGBEVF_STAT(stats.vfgotc, stats.base_vfgotc,
+ stats.saved_reset_vfgotc)},
+ {"tx_busy", IXGBEVF_STAT(tx_busy, zero_base, zero_base)},
+ {"multicast", IXGBEVF_STAT(stats.vfmprc, stats.base_vfmprc,
+ stats.saved_reset_vfmprc)},
+ {"rx_csum_offload_good", IXGBEVF_STAT(hw_csum_rx_good, zero_base,
+ zero_base)},
+ {"rx_csum_offload_errors", IXGBEVF_STAT(hw_csum_rx_error, zero_base,
+ zero_base)},
+ {"tx_csum_offload_ctxt", IXGBEVF_STAT(hw_csum_tx_good, zero_base,
+ zero_base)},
+ {"rx_header_split", IXGBEVF_STAT(rx_hdr_split, zero_base, zero_base)},
+};
+
+#define IXGBE_QUEUE_STATS_LEN 0
+#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
+
+#define IXGBEVF_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + IXGBE_QUEUE_STATS_LEN)
+#endif /* ETHTOOL_GSTATS */
+#ifdef ETHTOOL_TEST
+static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
+ "Register test (offline)",
+ "Link test (on/offline)"
+};
+#define IXGBE_TEST_LEN (sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN)
+#endif /* ETHTOOL_TEST */
+
+static int ixgbevf_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = 0;
+ bool link_up;
+
+ ecmd->supported = SUPPORTED_10000baseT_Full;
+ ecmd->autoneg = AUTONEG_DISABLE;
+ ecmd->transceiver = XCVR_DUMMY1;
+ ecmd->port = -1;
+
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
+
+ if (link_up) {
+ ethtool_cmd_speed_set(
+ ecmd,
+ (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+ SPEED_10000 : SPEED_1000);
+ ecmd->duplex = DUPLEX_FULL;
+ } else {
+ ethtool_cmd_speed_set(ecmd, -1);
+ ecmd->duplex = -1;
+ }
+
+ return 0;
+}
+
+static u32 ixgbevf_get_rx_csum(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ return adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED;
+}
+
+static int ixgbevf_set_rx_csum(struct net_device *netdev, u32 data)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ if (data)
+ adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+ else
+ adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
+
+ if (netif_running(netdev)) {
+ if (!adapter->dev_closed)
+ ixgbevf_reinit_locked(adapter);
+ } else {
+ ixgbevf_reset(adapter);
+ }
+
+ return 0;
+}
+
+static int ixgbevf_set_tso(struct net_device *netdev, u32 data)
+{
+ if (data) {
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ } else {
+ netif_tx_stop_all_queues(netdev);
+ netdev->features &= ~NETIF_F_TSO;
+ netdev->features &= ~NETIF_F_TSO6;
+ netif_tx_start_all_queues(netdev);
+ }
+ return 0;
+}
+
+static u32 ixgbevf_get_msglevel(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ return adapter->msg_enable;
+}
+
+static void ixgbevf_set_msglevel(struct net_device *netdev, u32 data)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ adapter->msg_enable = data;
+}
+
+#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_)
+
+static char *ixgbevf_reg_names[] = {
+ "IXGBE_VFCTRL",
+ "IXGBE_VFSTATUS",
+ "IXGBE_VFLINKS",
+ "IXGBE_VFRXMEMWRAP",
+ "IXGBE_VFFRTIMER",
+ "IXGBE_VTEICR",
+ "IXGBE_VTEICS",
+ "IXGBE_VTEIMS",
+ "IXGBE_VTEIMC",
+ "IXGBE_VTEIAC",
+ "IXGBE_VTEIAM",
+ "IXGBE_VTEITR",
+ "IXGBE_VTIVAR",
+ "IXGBE_VTIVAR_MISC",
+ "IXGBE_VFRDBAL0",
+ "IXGBE_VFRDBAL1",
+ "IXGBE_VFRDBAH0",
+ "IXGBE_VFRDBAH1",
+ "IXGBE_VFRDLEN0",
+ "IXGBE_VFRDLEN1",
+ "IXGBE_VFRDH0",
+ "IXGBE_VFRDH1",
+ "IXGBE_VFRDT0",
+ "IXGBE_VFRDT1",
+ "IXGBE_VFRXDCTL0",
+ "IXGBE_VFRXDCTL1",
+ "IXGBE_VFSRRCTL0",
+ "IXGBE_VFSRRCTL1",
+ "IXGBE_VFPSRTYPE",
+ "IXGBE_VFTDBAL0",
+ "IXGBE_VFTDBAL1",
+ "IXGBE_VFTDBAH0",
+ "IXGBE_VFTDBAH1",
+ "IXGBE_VFTDLEN0",
+ "IXGBE_VFTDLEN1",
+ "IXGBE_VFTDH0",
+ "IXGBE_VFTDH1",
+ "IXGBE_VFTDT0",
+ "IXGBE_VFTDT1",
+ "IXGBE_VFTXDCTL0",
+ "IXGBE_VFTXDCTL1",
+ "IXGBE_VFTDWBAL0",
+ "IXGBE_VFTDWBAL1",
+ "IXGBE_VFTDWBAH0",
+ "IXGBE_VFTDWBAH1"
+};
+
+
+static int ixgbevf_get_regs_len(struct net_device *netdev)
+{
+ return (ARRAY_SIZE(ixgbevf_reg_names)) * sizeof(u32);
+}
+
+static void ixgbevf_get_regs(struct net_device *netdev,
+ struct ethtool_regs *regs,
+ void *p)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 *regs_buff = p;
+ u32 regs_len = ixgbevf_get_regs_len(netdev);
+ u8 i;
+
+ memset(p, 0, regs_len);
+
+ regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id;
+
+ /* General Registers */
+ regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_VFCTRL);
+ regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_VFSTATUS);
+ regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+ regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_VFRXMEMWRAP);
+ regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_VFFRTIMER);
+
+ /* Interrupt */
+ /* don't read EICR because it can clear interrupt causes, instead
+ * read EICS which is a shadow but doesn't clear EICR */
+ regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+ regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+ regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
+ regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_VTEIMC);
+ regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_VTEIAC);
+ regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_VTEIAM);
+ regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_VTEITR(0));
+ regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_VTIVAR(0));
+ regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
+
+ /* Receive DMA */
+ for (i = 0; i < 2; i++)
+ regs_buff[14 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAL(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[16 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAH(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[18 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDLEN(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[20 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDH(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[22 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDT(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[24 + i] = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[26 + i] = IXGBE_READ_REG(hw, IXGBE_VFSRRCTL(i));
+
+ /* Receive */
+ regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_VFPSRTYPE);
+
+ /* Transmit */
+ for (i = 0; i < 2; i++)
+ regs_buff[29 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAL(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[31 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAH(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[33 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDLEN(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDH(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[37 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDT(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[39 + i] = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[41 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAL(i));
+ for (i = 0; i < 2; i++)
+ regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAH(i));
+
+ for (i = 0; i < ARRAY_SIZE(ixgbevf_reg_names); i++)
+ hw_dbg(hw, "%s\t%8.8x\n", ixgbevf_reg_names[i], regs_buff[i]);
+}
+
+static void ixgbevf_get_drvinfo(struct net_device *netdev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ strlcpy(drvinfo->driver, ixgbevf_driver_name, 32);
+ strlcpy(drvinfo->version, ixgbevf_driver_version, 32);
+
+ strlcpy(drvinfo->fw_version, "N/A", 4);
+ strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
+}
+
+static void ixgbevf_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbevf_ring *tx_ring = adapter->tx_ring;
+ struct ixgbevf_ring *rx_ring = adapter->rx_ring;
+
+ ring->rx_max_pending = IXGBEVF_MAX_RXD;
+ ring->tx_max_pending = IXGBEVF_MAX_TXD;
+ ring->rx_mini_max_pending = 0;
+ ring->rx_jumbo_max_pending = 0;
+ ring->rx_pending = rx_ring->count;
+ ring->tx_pending = tx_ring->count;
+ ring->rx_mini_pending = 0;
+ ring->rx_jumbo_pending = 0;
+}
+
+static int ixgbevf_set_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbevf_ring *tx_ring = NULL, *rx_ring = NULL;
+ int i, err = 0;
+ u32 new_rx_count, new_tx_count;
+
+ if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
+ return -EINVAL;
+
+ new_rx_count = max(ring->rx_pending, (u32)IXGBEVF_MIN_RXD);
+ new_rx_count = min(new_rx_count, (u32)IXGBEVF_MAX_RXD);
+ new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
+
+ new_tx_count = max(ring->tx_pending, (u32)IXGBEVF_MIN_TXD);
+ new_tx_count = min(new_tx_count, (u32)IXGBEVF_MAX_TXD);
+ new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
+
+ if ((new_tx_count == adapter->tx_ring->count) &&
+ (new_rx_count == adapter->rx_ring->count)) {
+ /* nothing to do */
+ return 0;
+ }
+
+ while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
+ msleep(1);
+
+ /*
+ * If the adapter isn't up and running then just set the
+ * new parameters and scurry for the exits.
+ */
+ if (!netif_running(adapter->netdev)) {
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ adapter->tx_ring[i].count = new_tx_count;
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ adapter->rx_ring[i].count = new_rx_count;
+ adapter->tx_ring_count = new_tx_count;
+ adapter->rx_ring_count = new_rx_count;
+ goto clear_reset;
+ }
+
+ tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct ixgbevf_ring), GFP_KERNEL);
+ if (!tx_ring) {
+ err = -ENOMEM;
+ goto clear_reset;
+ }
+
+ rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct ixgbevf_ring), GFP_KERNEL);
+ if (!rx_ring) {
+ err = -ENOMEM;
+ goto err_rx_setup;
+ }
+
+ ixgbevf_down(adapter);
+
+ memcpy(tx_ring, adapter->tx_ring,
+ adapter->num_tx_queues * sizeof(struct ixgbevf_ring));
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ tx_ring[i].count = new_tx_count;
+ err = ixgbevf_setup_tx_resources(adapter, &tx_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ ixgbevf_free_tx_resources(adapter,
+ &tx_ring[i]);
+ }
+ goto err_tx_ring_setup;
+ }
+ tx_ring[i].v_idx = adapter->tx_ring[i].v_idx;
+ }
+
+ memcpy(rx_ring, adapter->rx_ring,
+ adapter->num_rx_queues * sizeof(struct ixgbevf_ring));
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rx_ring[i].count = new_rx_count;
+ err = ixgbevf_setup_rx_resources(adapter, &rx_ring[i]);
+ if (err) {
+ while (i) {
+ i--;
+ ixgbevf_free_rx_resources(adapter,
+ &rx_ring[i]);
+ }
+ goto err_rx_ring_setup;
+ }
+ rx_ring[i].v_idx = adapter->rx_ring[i].v_idx;
+ }
+
+ /*
+ * Only switch to new rings if all the prior allocations
+ * and ring setups have succeeded.
+ */
+ kfree(adapter->tx_ring);
+ adapter->tx_ring = tx_ring;
+ adapter->tx_ring_count = new_tx_count;
+
+ kfree(adapter->rx_ring);
+ adapter->rx_ring = rx_ring;
+ adapter->rx_ring_count = new_rx_count;
+
+ /* success! */
+ ixgbevf_up(adapter);
+
+ goto clear_reset;
+
+err_rx_ring_setup:
+ for(i = 0; i < adapter->num_tx_queues; i++)
+ ixgbevf_free_tx_resources(adapter, &tx_ring[i]);
+
+err_tx_ring_setup:
+ kfree(rx_ring);
+
+err_rx_setup:
+ kfree(tx_ring);
+
+clear_reset:
+ clear_bit(__IXGBEVF_RESETTING, &adapter->state);
+ return err;
+}
+
+static int ixgbevf_get_sset_count(struct net_device *dev, int stringset)
+{
+ switch (stringset) {
+ case ETH_SS_TEST:
+ return IXGBE_TEST_LEN;
+ case ETH_SS_STATS:
+ return IXGBE_GLOBAL_STATS_LEN;
+ default:
+ return -EINVAL;
+ }
+}
+
+static void ixgbevf_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ int i;
+
+ ixgbevf_update_stats(adapter);
+ for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+ char *p = (char *)adapter +
+ ixgbe_gstrings_stats[i].stat_offset;
+ char *b = (char *)adapter +
+ ixgbe_gstrings_stats[i].base_stat_offset;
+ char *r = (char *)adapter +
+ ixgbe_gstrings_stats[i].saved_reset_offset;
+ data[i] = ((ixgbe_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)p : *(u32 *)p) -
+ ((ixgbe_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)b : *(u32 *)b) +
+ ((ixgbe_gstrings_stats[i].sizeof_stat ==
+ sizeof(u64)) ? *(u64 *)r : *(u32 *)r);
+ }
+}
+
+static void ixgbevf_get_strings(struct net_device *netdev, u32 stringset,
+ u8 *data)
+{
+ char *p = (char *)data;
+ int i;
+
+ switch (stringset) {
+ case ETH_SS_TEST:
+ memcpy(data, *ixgbe_gstrings_test,
+ IXGBE_TEST_LEN * ETH_GSTRING_LEN);
+ break;
+ case ETH_SS_STATS:
+ for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
+ memcpy(p, ixgbe_gstrings_stats[i].stat_string,
+ ETH_GSTRING_LEN);
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+static int ixgbevf_link_test(struct ixgbevf_adapter *adapter, u64 *data)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ bool link_up;
+ u32 link_speed = 0;
+ *data = 0;
+
+ hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
+ if (!link_up)
+ *data = 1;
+
+ return *data;
+}
+
+/* ethtool register test data */
+struct ixgbevf_reg_test {
+ u16 reg;
+ u8 array_len;
+ u8 test_type;
+ u32 mask;
+ u32 write;
+};
+
+/* In the hardware, registers are laid out either singly, in arrays
+ * spaced 0x40 bytes apart, or in contiguous tables. We assume
+ * most tests take place on arrays or single registers (handled
+ * as a single-element array) and special-case the tables.
+ * Table tests are always pattern tests.
+ *
+ * We also make provision for some required setup steps by specifying
+ * registers to be written without any read-back testing.
+ */
+
+#define PATTERN_TEST 1
+#define SET_READ_TEST 2
+#define WRITE_NO_TEST 3
+#define TABLE32_TEST 4
+#define TABLE64_TEST_LO 5
+#define TABLE64_TEST_HI 6
+
+/* default VF register test */
+static const struct ixgbevf_reg_test reg_test_vf[] = {
+ { IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
+ { IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
+ { IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
+ { IXGBE_VFRDT(0), 2, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
+ { IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, 0 },
+ { IXGBE_VFTDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
+ { IXGBE_VFTDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
+ { IXGBE_VFTDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
+ { 0, 0, 0, 0 }
+};
+
+static const u32 register_test_patterns[] = {
+ 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
+};
+
+#define REG_PATTERN_TEST(R, M, W) \
+{ \
+ u32 pat, val, before; \
+ for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
+ before = readl(adapter->hw.hw_addr + R); \
+ writel((register_test_patterns[pat] & W), \
+ (adapter->hw.hw_addr + R)); \
+ val = readl(adapter->hw.hw_addr + R); \
+ if (val != (register_test_patterns[pat] & W & M)) { \
+ hw_dbg(&adapter->hw, \
+ "pattern test reg %04X failed: got " \
+ "0x%08X expected 0x%08X\n", \
+ R, val, (register_test_patterns[pat] & W & M)); \
+ *data = R; \
+ writel(before, adapter->hw.hw_addr + R); \
+ return 1; \
+ } \
+ writel(before, adapter->hw.hw_addr + R); \
+ } \
+}
+
+#define REG_SET_AND_CHECK(R, M, W) \
+{ \
+ u32 val, before; \
+ before = readl(adapter->hw.hw_addr + R); \
+ writel((W & M), (adapter->hw.hw_addr + R)); \
+ val = readl(adapter->hw.hw_addr + R); \
+ if ((W & M) != (val & M)) { \
+ printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
+ "expected 0x%08X\n", R, (val & M), (W & M)); \
+ *data = R; \
+ writel(before, (adapter->hw.hw_addr + R)); \
+ return 1; \
+ } \
+ writel(before, (adapter->hw.hw_addr + R)); \
+}
+
+static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
+{
+ const struct ixgbevf_reg_test *test;
+ u32 i;
+
+ test = reg_test_vf;
+
+ /*
+ * Perform the register test, looping through the test table
+ * until we either fail or reach the null entry.
+ */
+ while (test->reg) {
+ for (i = 0; i < test->array_len; i++) {
+ switch (test->test_type) {
+ case PATTERN_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 0x40),
+ test->mask,
+ test->write);
+ break;
+ case SET_READ_TEST:
+ REG_SET_AND_CHECK(test->reg + (i * 0x40),
+ test->mask,
+ test->write);
+ break;
+ case WRITE_NO_TEST:
+ writel(test->write,
+ (adapter->hw.hw_addr + test->reg)
+ + (i * 0x40));
+ break;
+ case TABLE32_TEST:
+ REG_PATTERN_TEST(test->reg + (i * 4),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_LO:
+ REG_PATTERN_TEST(test->reg + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ case TABLE64_TEST_HI:
+ REG_PATTERN_TEST((test->reg + 4) + (i * 8),
+ test->mask,
+ test->write);
+ break;
+ }
+ }
+ test++;
+ }
+
+ *data = 0;
+ return *data;
+}
+
+static void ixgbevf_diag_test(struct net_device *netdev,
+ struct ethtool_test *eth_test, u64 *data)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ bool if_running = netif_running(netdev);
+
+ set_bit(__IXGBEVF_TESTING, &adapter->state);
+ if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+ /* Offline tests */
+
+ hw_dbg(&adapter->hw, "offline testing starting\n");
+
+ /* Link test performed before hardware reset so autoneg doesn't
+ * interfere with test result */
+ if (ixgbevf_link_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ if (if_running)
+ /* indicate we're in test mode */
+ dev_close(netdev);
+ else
+ ixgbevf_reset(adapter);
+
+ hw_dbg(&adapter->hw, "register testing starting\n");
+ if (ixgbevf_reg_test(adapter, &data[0]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ ixgbevf_reset(adapter);
+
+ clear_bit(__IXGBEVF_TESTING, &adapter->state);
+ if (if_running)
+ dev_open(netdev);
+ } else {
+ hw_dbg(&adapter->hw, "online testing starting\n");
+ /* Online tests */
+ if (ixgbevf_link_test(adapter, &data[1]))
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+
+ /* Online tests aren't run; pass by default */
+ data[0] = 0;
+
+ clear_bit(__IXGBEVF_TESTING, &adapter->state);
+ }
+ msleep_interruptible(4 * 1000);
+}
+
+static int ixgbevf_nway_reset(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ if (netif_running(netdev)) {
+ if (!adapter->dev_closed)
+ ixgbevf_reinit_locked(adapter);
+ }
+
+ return 0;
+}
+
+static struct ethtool_ops ixgbevf_ethtool_ops = {
+ .get_settings = ixgbevf_get_settings,
+ .get_drvinfo = ixgbevf_get_drvinfo,
+ .get_regs_len = ixgbevf_get_regs_len,
+ .get_regs = ixgbevf_get_regs,
+ .nway_reset = ixgbevf_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_ringparam = ixgbevf_get_ringparam,
+ .set_ringparam = ixgbevf_set_ringparam,
+ .get_rx_csum = ixgbevf_get_rx_csum,
+ .set_rx_csum = ixgbevf_set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_msglevel = ixgbevf_get_msglevel,
+ .set_msglevel = ixgbevf_set_msglevel,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ixgbevf_set_tso,
+ .self_test = ixgbevf_diag_test,
+ .get_sset_count = ixgbevf_get_sset_count,
+ .get_strings = ixgbevf_get_strings,
+ .get_ethtool_stats = ixgbevf_get_ethtool_stats,
+};
+
+void ixgbevf_set_ethtool_ops(struct net_device *netdev)
+{
+ SET_ETHTOOL_OPS(netdev, &ixgbevf_ethtool_ops);
+}
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_H_
+#define _IXGBEVF_H_
+
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+
+#include "vf.h"
+
+/* wrapper around a pointer to a socket buffer,
+ * so a DMA handle can be stored along with the buffer */
+struct ixgbevf_tx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned long time_stamp;
+ u16 length;
+ u16 next_to_watch;
+ u16 mapped_as_page;
+};
+
+struct ixgbevf_rx_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ struct page *page;
+ dma_addr_t page_dma;
+ unsigned int page_offset;
+};
+
+struct ixgbevf_ring {
+ struct ixgbevf_adapter *adapter; /* backlink */
+ void *desc; /* descriptor ring memory */
+ dma_addr_t dma; /* phys. address of descriptor ring */
+ unsigned int size; /* length in bytes */
+ unsigned int count; /* amount of descriptors */
+ unsigned int next_to_use;
+ unsigned int next_to_clean;
+
+ int queue_index; /* needed for multiqueue queue management */
+ union {
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ struct ixgbevf_rx_buffer *rx_buffer_info;
+ };
+
+ u16 head;
+ u16 tail;
+
+ unsigned int total_bytes;
+ unsigned int total_packets;
+
+ u16 reg_idx; /* holds the special value that gets the hardware register
+ * offset associated with this ring, which is different
+ * for DCB and RSS modes */
+
+#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
+ /* cpu for tx queue */
+ int cpu;
+#endif
+
+ u64 v_idx; /* maps directly to the index for this ring in the hardware
+ * vector array, can also be used for finding the bit in EICR
+ * and friends that represents the vector for this ring */
+
+ u16 work_limit; /* max work per interrupt */
+ u16 rx_buf_len;
+};
+
+enum ixgbevf_ring_f_enum {
+ RING_F_NONE = 0,
+ RING_F_ARRAY_SIZE /* must be last in enum set */
+};
+
+struct ixgbevf_ring_feature {
+ int indices;
+ int mask;
+};
+
+/* How many Rx Buffers do we bundle into one write to the hardware ? */
+#define IXGBEVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
+
+#define MAX_RX_QUEUES 1
+#define MAX_TX_QUEUES 1
+
+#define IXGBEVF_DEFAULT_TXD 1024
+#define IXGBEVF_DEFAULT_RXD 512
+#define IXGBEVF_MAX_TXD 4096
+#define IXGBEVF_MIN_TXD 64
+#define IXGBEVF_MAX_RXD 4096
+#define IXGBEVF_MIN_RXD 64
+
+/* Supported Rx Buffer Sizes */
+#define IXGBEVF_RXBUFFER_64 64 /* Used for packet split */
+#define IXGBEVF_RXBUFFER_128 128 /* Used for packet split */
+#define IXGBEVF_RXBUFFER_256 256 /* Used for packet split */
+#define IXGBEVF_RXBUFFER_2048 2048
+#define IXGBEVF_MAX_RXBUFFER 16384 /* largest size for single descriptor */
+
+#define IXGBEVF_RX_HDR_SIZE IXGBEVF_RXBUFFER_256
+
+#define MAXIMUM_ETHERNET_VLAN_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
+
+#define IXGBE_TX_FLAGS_CSUM (u32)(1)
+#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1)
+#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2)
+#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3)
+#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 4)
+#define IXGBE_TX_FLAGS_FSO (u32)(1 << 5)
+#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
+#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
+#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
+
+/* MAX_MSIX_Q_VECTORS of these are allocated,
+ * but we only use one per queue-specific vector.
+ */
+struct ixgbevf_q_vector {
+ struct ixgbevf_adapter *adapter;
+ struct napi_struct napi;
+ DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
+ DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
+ u8 rxr_count; /* Rx ring count assigned to this vector */
+ u8 txr_count; /* Tx ring count assigned to this vector */
+ u8 tx_itr;
+ u8 rx_itr;
+ u32 eitr;
+ int v_idx; /* vector index in list */
+};
+
+/* Helper macros to switch between ints/sec and what the register uses.
+ * And yes, it's the same math going both ways. The lowest value
+ * supported by all of the ixgbe hardware is 8.
+ */
+#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
+ ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
+#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
+
+#define IXGBE_DESC_UNUSED(R) \
+ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
+ (R)->next_to_clean - (R)->next_to_use - 1)
+
+#define IXGBE_RX_DESC_ADV(R, i) \
+ (&(((union ixgbe_adv_rx_desc *)((R).desc))[i]))
+#define IXGBE_TX_DESC_ADV(R, i) \
+ (&(((union ixgbe_adv_tx_desc *)((R).desc))[i]))
+#define IXGBE_TX_CTXTDESC_ADV(R, i) \
+ (&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
+
+#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
+
+#define OTHER_VECTOR 1
+#define NON_Q_VECTORS (OTHER_VECTOR)
+
+#define MAX_MSIX_Q_VECTORS 2
+#define MAX_MSIX_COUNT 2
+
+#define MIN_MSIX_Q_VECTORS 2
+#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
+
+/* board specific private data structure */
+struct ixgbevf_adapter {
+ struct timer_list watchdog_timer;
+ unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
+ u16 bd_number;
+ struct work_struct reset_task;
+ struct ixgbevf_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
+ char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
+
+ /* Interrupt Throttle Rate */
+ u32 itr_setting;
+ u16 eitr_low;
+ u16 eitr_high;
+
+ /* TX */
+ struct ixgbevf_ring *tx_ring; /* One per active queue */
+ int num_tx_queues;
+ u64 restart_queue;
+ u64 hw_csum_tx_good;
+ u64 lsc_int;
+ u64 hw_tso_ctxt;
+ u64 hw_tso6_ctxt;
+ u32 tx_timeout_count;
+
+ /* RX */
+ struct ixgbevf_ring *rx_ring; /* One per active queue */
+ int num_rx_queues;
+ int num_rx_pools; /* == num_rx_queues in 82598 */
+ int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */
+ u64 hw_csum_rx_error;
+ u64 hw_rx_no_dma_resources;
+ u64 hw_csum_rx_good;
+ u64 non_eop_descs;
+ int num_msix_vectors;
+ int max_msix_q_vectors; /* true count of q_vectors for device */
+ struct ixgbevf_ring_feature ring_feature[RING_F_ARRAY_SIZE];
+ struct msix_entry *msix_entries;
+
+ u64 rx_hdr_split;
+ u32 alloc_rx_page_failed;
+ u32 alloc_rx_buff_failed;
+
+ /* Some features need tri-state capability,
+ * thus the additional *_CAPABLE flags.
+ */
+ u32 flags;
+#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
+#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 1)
+#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 2)
+#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3)
+#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4)
+#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5)
+#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 6)
+#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 7)
+#define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 8)
+ /* OS defined structs */
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+
+ /* structs defined in ixgbe_vf.h */
+ struct ixgbe_hw hw;
+ u16 msg_enable;
+ struct ixgbevf_hw_stats stats;
+ u64 zero_base;
+ /* Interrupt Throttle Rate */
+ u32 eitr_param;
+
+ unsigned long state;
+ u32 *config_space;
+ u64 tx_busy;
+ unsigned int tx_ring_count;
+ unsigned int rx_ring_count;
+
+ u32 link_speed;
+ bool link_up;
+ unsigned long link_check_timeout;
+
+ struct work_struct watchdog_task;
+ bool netdev_registered;
+ bool dev_closed;
+};
+
+enum ixbgevf_state_t {
+ __IXGBEVF_TESTING,
+ __IXGBEVF_RESETTING,
+ __IXGBEVF_DOWN
+};
+
+enum ixgbevf_boards {
+ board_82599_vf,
+ board_X540_vf,
+};
+
+extern struct ixgbevf_info ixgbevf_82599_vf_info;
+extern struct ixgbevf_info ixgbevf_X540_vf_info;
+extern struct ixgbe_mbx_operations ixgbevf_mbx_ops;
+
+/* needed by ethtool.c */
+extern char ixgbevf_driver_name[];
+extern const char ixgbevf_driver_version[];
+
+extern int ixgbevf_up(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_down(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_reset(struct ixgbevf_adapter *adapter);
+extern void ixgbevf_set_ethtool_ops(struct net_device *netdev);
+extern int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *,
+ struct ixgbevf_ring *);
+extern int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *,
+ struct ixgbevf_ring *);
+extern void ixgbevf_free_rx_resources(struct ixgbevf_adapter *,
+ struct ixgbevf_ring *);
+extern void ixgbevf_free_tx_resources(struct ixgbevf_adapter *,
+ struct ixgbevf_ring *);
+extern void ixgbevf_update_stats(struct ixgbevf_adapter *adapter);
+
+#ifdef ETHTOOL_OPS_COMPAT
+extern int ethtool_ioctl(struct ifreq *ifr);
+
+#endif
+extern void ixgbe_napi_add_all(struct ixgbevf_adapter *adapter);
+extern void ixgbe_napi_del_all(struct ixgbevf_adapter *adapter);
+
+#ifdef DEBUG
+extern char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw);
+#define hw_dbg(hw, format, arg...) \
+ printk(KERN_DEBUG "%s: " format, ixgbevf_get_hw_dev_name(hw), ##arg)
+#else
+#define hw_dbg(hw, format, arg...) do {} while (0)
+#endif
+
+#endif /* _IXGBEVF_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+
+/******************************************************************************
+ Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
+******************************************************************************/
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/string.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/ipv6.h>
+#include <linux/slab.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/prefetch.h>
+
+#include "ixgbevf.h"
+
+char ixgbevf_driver_name[] = "ixgbevf";
+static const char ixgbevf_driver_string[] =
+ "Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver";
+
+#define DRV_VERSION "2.1.0-k"
+const char ixgbevf_driver_version[] = DRV_VERSION;
+static char ixgbevf_copyright[] =
+ "Copyright (c) 2009 - 2010 Intel Corporation.";
+
+static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
+ [board_82599_vf] = &ixgbevf_82599_vf_info,
+ [board_X540_vf] = &ixgbevf_X540_vf_info,
+};
+
+/* ixgbevf_pci_tbl - PCI Device ID Table
+ *
+ * Wildcard entries (PCI_ANY_ID) should come last
+ * Last entry must be all 0s
+ *
+ * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
+ * Class, Class Mask, private data (not used) }
+ */
+static struct pci_device_id ixgbevf_pci_tbl[] = {
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF),
+ board_82599_vf},
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF),
+ board_X540_vf},
+
+ /* required last entry */
+ {0, }
+};
+MODULE_DEVICE_TABLE(pci, ixgbevf_pci_tbl);
+
+MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
+MODULE_DESCRIPTION("Intel(R) 82599 Virtual Function Driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+#define DEFAULT_DEBUG_LEVEL_SHIFT 3
+
+/* forward decls */
+static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector);
+static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
+ u32 itr_reg);
+
+static inline void ixgbevf_release_rx_desc(struct ixgbe_hw *hw,
+ struct ixgbevf_ring *rx_ring,
+ u32 val)
+{
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rx_ring->reg_idx), val);
+}
+
+/*
+ * ixgbevf_set_ivar - set IVAR registers - maps interrupt causes to vectors
+ * @adapter: pointer to adapter struct
+ * @direction: 0 for Rx, 1 for Tx, -1 for other causes
+ * @queue: queue to map the corresponding interrupt to
+ * @msix_vector: the vector to map to the corresponding queue
+ *
+ */
+static void ixgbevf_set_ivar(struct ixgbevf_adapter *adapter, s8 direction,
+ u8 queue, u8 msix_vector)
+{
+ u32 ivar, index;
+ struct ixgbe_hw *hw = &adapter->hw;
+ if (direction == -1) {
+ /* other causes */
+ msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+ ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
+ ivar &= ~0xFF;
+ ivar |= msix_vector;
+ IXGBE_WRITE_REG(hw, IXGBE_VTIVAR_MISC, ivar);
+ } else {
+ /* tx or rx causes */
+ msix_vector |= IXGBE_IVAR_ALLOC_VAL;
+ index = ((16 * (queue & 1)) + (8 * direction));
+ ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR(queue >> 1));
+ ivar &= ~(0xFF << index);
+ ivar |= (msix_vector << index);
+ IXGBE_WRITE_REG(hw, IXGBE_VTIVAR(queue >> 1), ivar);
+ }
+}
+
+static void ixgbevf_unmap_and_free_tx_resource(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_tx_buffer
+ *tx_buffer_info)
+{
+ if (tx_buffer_info->dma) {
+ if (tx_buffer_info->mapped_as_page)
+ dma_unmap_page(&adapter->pdev->dev,
+ tx_buffer_info->dma,
+ tx_buffer_info->length,
+ DMA_TO_DEVICE);
+ else
+ dma_unmap_single(&adapter->pdev->dev,
+ tx_buffer_info->dma,
+ tx_buffer_info->length,
+ DMA_TO_DEVICE);
+ tx_buffer_info->dma = 0;
+ }
+ if (tx_buffer_info->skb) {
+ dev_kfree_skb_any(tx_buffer_info->skb);
+ tx_buffer_info->skb = NULL;
+ }
+ tx_buffer_info->time_stamp = 0;
+ /* tx_buffer_info must be completely set up in the transmit path */
+}
+
+#define IXGBE_MAX_TXD_PWR 14
+#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR)
+
+/* Tx Descriptors needed, worst case */
+#define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \
+ (((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
+#ifdef MAX_SKB_FRAGS
+#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
+ MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */
+#else
+#define DESC_NEEDED TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD)
+#endif
+
+static void ixgbevf_tx_timeout(struct net_device *netdev);
+
+/**
+ * ixgbevf_clean_tx_irq - Reclaim resources after transmit completes
+ * @adapter: board private structure
+ * @tx_ring: tx ring to clean
+ **/
+static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ unsigned int i, eop, count = 0;
+ unsigned int total_bytes = 0, total_packets = 0;
+
+ i = tx_ring->next_to_clean;
+ eop = tx_ring->tx_buffer_info[i].next_to_watch;
+ eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
+
+ while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
+ (count < tx_ring->work_limit)) {
+ bool cleaned = false;
+ rmb(); /* read buffer_info after eop_desc */
+ for ( ; !cleaned; count++) {
+ struct sk_buff *skb;
+ tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ cleaned = (i == eop);
+ skb = tx_buffer_info->skb;
+
+ if (cleaned && skb) {
+ unsigned int segs, bytecount;
+
+ /* gso_segs is currently only valid for tcp */
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
+ total_packets += segs;
+ total_bytes += bytecount;
+ }
+
+ ixgbevf_unmap_and_free_tx_resource(adapter,
+ tx_buffer_info);
+
+ tx_desc->wb.status = 0;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ eop = tx_ring->tx_buffer_info[i].next_to_watch;
+ eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
+ }
+
+ tx_ring->next_to_clean = i;
+
+#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
+ if (unlikely(count && netif_carrier_ok(netdev) &&
+ (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
+ /* Make sure that anybody stopping the queue after this
+ * sees the new next_to_clean.
+ */
+ smp_mb();
+#ifdef HAVE_TX_MQ
+ if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
+ !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
+ netif_wake_subqueue(netdev, tx_ring->queue_index);
+ ++adapter->restart_queue;
+ }
+#else
+ if (netif_queue_stopped(netdev) &&
+ !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
+ netif_wake_queue(netdev);
+ ++adapter->restart_queue;
+ }
+#endif
+ }
+
+ /* re-arm the interrupt */
+ if ((count >= tx_ring->work_limit) &&
+ (!test_bit(__IXGBEVF_DOWN, &adapter->state))) {
+ IXGBE_WRITE_REG(hw, IXGBE_VTEICS, tx_ring->v_idx);
+ }
+
+ tx_ring->total_bytes += total_bytes;
+ tx_ring->total_packets += total_packets;
+
+ netdev->stats.tx_bytes += total_bytes;
+ netdev->stats.tx_packets += total_packets;
+
+ return count < tx_ring->work_limit;
+}
+
+/**
+ * ixgbevf_receive_skb - Send a completed packet up the stack
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: packet to send up
+ * @status: hardware indication of status of receive
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ * @rx_desc: rx descriptor
+ **/
+static void ixgbevf_receive_skb(struct ixgbevf_q_vector *q_vector,
+ struct sk_buff *skb, u8 status,
+ struct ixgbevf_ring *ring,
+ union ixgbe_adv_rx_desc *rx_desc)
+{
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ bool is_vlan = (status & IXGBE_RXD_STAT_VP);
+
+ if (is_vlan) {
+ u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
+
+ __vlan_hwaccel_put_tag(skb, tag);
+ }
+
+ if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
+ napi_gro_receive(&q_vector->napi, skb);
+ else
+ netif_rx(skb);
+}
+
+/**
+ * ixgbevf_rx_checksum - indicate in skb if hw indicated a good cksum
+ * @adapter: address of board private structure
+ * @status_err: hardware indication of status of receive
+ * @skb: skb currently being received and modified
+ **/
+static inline void ixgbevf_rx_checksum(struct ixgbevf_adapter *adapter,
+ u32 status_err, struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* Rx csum disabled */
+ if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
+ return;
+
+ /* if IP and error */
+ if ((status_err & IXGBE_RXD_STAT_IPCS) &&
+ (status_err & IXGBE_RXDADV_ERR_IPE)) {
+ adapter->hw_csum_rx_error++;
+ return;
+ }
+
+ if (!(status_err & IXGBE_RXD_STAT_L4CS))
+ return;
+
+ if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+ adapter->hw_csum_rx_error++;
+ return;
+ }
+
+ /* It must be a TCP or UDP packet with a valid checksum */
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ adapter->hw_csum_rx_good++;
+}
+
+/**
+ * ixgbevf_alloc_rx_buffers - Replace used receive buffers; packet split
+ * @adapter: address of board private structure
+ **/
+static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *rx_ring,
+ int cleaned_count)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ union ixgbe_adv_rx_desc *rx_desc;
+ struct ixgbevf_rx_buffer *bi;
+ struct sk_buff *skb;
+ unsigned int i;
+ unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
+
+ i = rx_ring->next_to_use;
+ bi = &rx_ring->rx_buffer_info[i];
+
+ while (cleaned_count--) {
+ rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
+
+ if (!bi->page_dma &&
+ (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
+ if (!bi->page) {
+ bi->page = netdev_alloc_page(adapter->netdev);
+ if (!bi->page) {
+ adapter->alloc_rx_page_failed++;
+ goto no_buffers;
+ }
+ bi->page_offset = 0;
+ } else {
+ /* use a half page if we're re-using */
+ bi->page_offset ^= (PAGE_SIZE / 2);
+ }
+
+ bi->page_dma = dma_map_page(&pdev->dev, bi->page,
+ bi->page_offset,
+ (PAGE_SIZE / 2),
+ DMA_FROM_DEVICE);
+ }
+
+ skb = bi->skb;
+ if (!skb) {
+ skb = netdev_alloc_skb(adapter->netdev,
+ bufsz);
+
+ if (!skb) {
+ adapter->alloc_rx_buff_failed++;
+ goto no_buffers;
+ }
+
+ /*
+ * Make buffer alignment 2 beyond a 16 byte boundary
+ * this will result in a 16 byte aligned IP header after
+ * the 14 byte MAC header is removed
+ */
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ bi->skb = skb;
+ }
+ if (!bi->dma) {
+ bi->dma = dma_map_single(&pdev->dev, skb->data,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ }
+ /* Refresh the desc even if buffer_addrs didn't change because
+ * each write-back erases this info. */
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
+ rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
+ } else {
+ rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+ bi = &rx_ring->rx_buffer_info[i];
+ }
+
+no_buffers:
+ if (rx_ring->next_to_use != i) {
+ rx_ring->next_to_use = i;
+ if (i-- == 0)
+ i = (rx_ring->count - 1);
+
+ ixgbevf_release_rx_desc(&adapter->hw, rx_ring, i);
+ }
+}
+
+static inline void ixgbevf_irq_enable_queues(struct ixgbevf_adapter *adapter,
+ u64 qmask)
+{
+ u32 mask;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ mask = (qmask & 0xFFFFFFFF);
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
+}
+
+static inline u16 ixgbevf_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc)
+{
+ return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
+}
+
+static inline u16 ixgbevf_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
+{
+ return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+}
+
+static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
+ struct ixgbevf_ring *rx_ring,
+ int *work_done, int work_to_do)
+{
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ struct pci_dev *pdev = adapter->pdev;
+ union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
+ struct ixgbevf_rx_buffer *rx_buffer_info, *next_buffer;
+ struct sk_buff *skb;
+ unsigned int i;
+ u32 len, staterr;
+ u16 hdr_info;
+ bool cleaned = false;
+ int cleaned_count = 0;
+ unsigned int total_rx_bytes = 0, total_rx_packets = 0;
+
+ i = rx_ring->next_to_clean;
+ rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
+ while (staterr & IXGBE_RXD_STAT_DD) {
+ u32 upper_len = 0;
+ if (*work_done >= work_to_do)
+ break;
+ (*work_done)++;
+
+ rmb(); /* read descriptor and rx_buffer_info after status DD */
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
+ len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
+ IXGBE_RXDADV_HDRBUFLEN_SHIFT;
+ if (hdr_info & IXGBE_RXDADV_SPH)
+ adapter->rx_hdr_split++;
+ if (len > IXGBEVF_RX_HDR_SIZE)
+ len = IXGBEVF_RX_HDR_SIZE;
+ upper_len = le16_to_cpu(rx_desc->wb.upper.length);
+ } else {
+ len = le16_to_cpu(rx_desc->wb.upper.length);
+ }
+ cleaned = true;
+ skb = rx_buffer_info->skb;
+ prefetch(skb->data - NET_IP_ALIGN);
+ rx_buffer_info->skb = NULL;
+
+ if (rx_buffer_info->dma) {
+ dma_unmap_single(&pdev->dev, rx_buffer_info->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ rx_buffer_info->dma = 0;
+ skb_put(skb, len);
+ }
+
+ if (upper_len) {
+ dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, DMA_FROM_DEVICE);
+ rx_buffer_info->page_dma = 0;
+ skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
+ rx_buffer_info->page,
+ rx_buffer_info->page_offset,
+ upper_len);
+
+ if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
+ (page_count(rx_buffer_info->page) != 1))
+ rx_buffer_info->page = NULL;
+ else
+ get_page(rx_buffer_info->page);
+
+ skb->len += upper_len;
+ skb->data_len += upper_len;
+ skb->truesize += upper_len;
+ }
+
+ i++;
+ if (i == rx_ring->count)
+ i = 0;
+
+ next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
+ prefetch(next_rxd);
+ cleaned_count++;
+
+ next_buffer = &rx_ring->rx_buffer_info[i];
+
+ if (!(staterr & IXGBE_RXD_STAT_EOP)) {
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ rx_buffer_info->skb = next_buffer->skb;
+ rx_buffer_info->dma = next_buffer->dma;
+ next_buffer->skb = skb;
+ next_buffer->dma = 0;
+ } else {
+ skb->next = next_buffer->skb;
+ skb->next->prev = skb;
+ }
+ adapter->non_eop_descs++;
+ goto next_desc;
+ }
+
+ /* ERR_MASK will only have valid bits if EOP set */
+ if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) {
+ dev_kfree_skb_irq(skb);
+ goto next_desc;
+ }
+
+ ixgbevf_rx_checksum(adapter, staterr, skb);
+
+ /* probably a little skewed due to removing CRC */
+ total_rx_bytes += skb->len;
+ total_rx_packets++;
+
+ /*
+ * Work around issue of some types of VM to VM loop back
+ * packets not getting split correctly
+ */
+ if (staterr & IXGBE_RXD_STAT_LB) {
+ u32 header_fixup_len = skb_headlen(skb);
+ if (header_fixup_len < 14)
+ skb_push(skb, header_fixup_len);
+ }
+ skb->protocol = eth_type_trans(skb, adapter->netdev);
+
+ ixgbevf_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
+
+next_desc:
+ rx_desc->wb.upper.status_error = 0;
+
+ /* return some buffers to hardware, one at a time is too slow */
+ if (cleaned_count >= IXGBEVF_RX_BUFFER_WRITE) {
+ ixgbevf_alloc_rx_buffers(adapter, rx_ring,
+ cleaned_count);
+ cleaned_count = 0;
+ }
+
+ /* use prefetched values */
+ rx_desc = next_rxd;
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+
+ staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+ }
+
+ rx_ring->next_to_clean = i;
+ cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
+
+ if (cleaned_count)
+ ixgbevf_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
+
+ rx_ring->total_packets += total_rx_packets;
+ rx_ring->total_bytes += total_rx_bytes;
+ adapter->netdev->stats.rx_bytes += total_rx_bytes;
+ adapter->netdev->stats.rx_packets += total_rx_packets;
+
+ return cleaned;
+}
+
+/**
+ * ixgbevf_clean_rxonly - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function is optimized for cleaning one queue only on a single
+ * q_vector!!!
+ **/
+static int ixgbevf_clean_rxonly(struct napi_struct *napi, int budget)
+{
+ struct ixgbevf_q_vector *q_vector =
+ container_of(napi, struct ixgbevf_q_vector, napi);
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ struct ixgbevf_ring *rx_ring = NULL;
+ int work_done = 0;
+ long r_idx;
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ rx_ring = &(adapter->rx_ring[r_idx]);
+
+ ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+
+ /* If all Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->itr_setting & 1)
+ ixgbevf_set_itr_msix(q_vector);
+ if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+ ixgbevf_irq_enable_queues(adapter, rx_ring->v_idx);
+ }
+
+ return work_done;
+}
+
+/**
+ * ixgbevf_clean_rxonly_many - msix (aka one shot) rx clean routine
+ * @napi: napi struct with our devices info in it
+ * @budget: amount of work driver is allowed to do this pass, in packets
+ *
+ * This function will clean more than one rx queue associated with a
+ * q_vector.
+ **/
+static int ixgbevf_clean_rxonly_many(struct napi_struct *napi, int budget)
+{
+ struct ixgbevf_q_vector *q_vector =
+ container_of(napi, struct ixgbevf_q_vector, napi);
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ struct ixgbevf_ring *rx_ring = NULL;
+ int work_done = 0, i;
+ long r_idx;
+ u64 enable_mask = 0;
+
+ /* attempt to distribute budget to each queue fairly, but don't allow
+ * the budget to go below 1 because we'll exit polling */
+ budget /= (q_vector->rxr_count ?: 1);
+ budget = max(budget, 1);
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ rx_ring = &(adapter->rx_ring[r_idx]);
+ ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
+ enable_mask |= rx_ring->v_idx;
+ r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+#ifndef HAVE_NETDEV_NAPI_LIST
+ if (!netif_running(adapter->netdev))
+ work_done = 0;
+
+#endif
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ rx_ring = &(adapter->rx_ring[r_idx]);
+
+ /* If all Rx work done, exit the polling mode */
+ if (work_done < budget) {
+ napi_complete(napi);
+ if (adapter->itr_setting & 1)
+ ixgbevf_set_itr_msix(q_vector);
+ if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+ ixgbevf_irq_enable_queues(adapter, enable_mask);
+ }
+
+ return work_done;
+}
+
+
+/**
+ * ixgbevf_configure_msix - Configure MSI-X hardware
+ * @adapter: board private structure
+ *
+ * ixgbevf_configure_msix sets up the hardware to properly generate MSI-X
+ * interrupts.
+ **/
+static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbevf_q_vector *q_vector;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i, j, q_vectors, v_idx, r_idx;
+ u32 mask;
+
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /*
+ * Populate the IVAR table and set the ITR values to the
+ * corresponding register.
+ */
+ for (v_idx = 0; v_idx < q_vectors; v_idx++) {
+ q_vector = adapter->q_vector[v_idx];
+ /* XXX for_each_set_bit(...) */
+ r_idx = find_first_bit(q_vector->rxr_idx,
+ adapter->num_rx_queues);
+
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ j = adapter->rx_ring[r_idx].reg_idx;
+ ixgbevf_set_ivar(adapter, 0, j, v_idx);
+ r_idx = find_next_bit(q_vector->rxr_idx,
+ adapter->num_rx_queues,
+ r_idx + 1);
+ }
+ r_idx = find_first_bit(q_vector->txr_idx,
+ adapter->num_tx_queues);
+
+ for (i = 0; i < q_vector->txr_count; i++) {
+ j = adapter->tx_ring[r_idx].reg_idx;
+ ixgbevf_set_ivar(adapter, 1, j, v_idx);
+ r_idx = find_next_bit(q_vector->txr_idx,
+ adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ /* if this is a tx only vector halve the interrupt rate */
+ if (q_vector->txr_count && !q_vector->rxr_count)
+ q_vector->eitr = (adapter->eitr_param >> 1);
+ else if (q_vector->rxr_count)
+ /* rx only */
+ q_vector->eitr = adapter->eitr_param;
+
+ ixgbevf_write_eitr(adapter, v_idx, q_vector->eitr);
+ }
+
+ ixgbevf_set_ivar(adapter, -1, 1, v_idx);
+
+ /* set up to autoclear timer, and the vectors */
+ mask = IXGBE_EIMS_ENABLE_MASK;
+ mask &= ~IXGBE_EIMS_OTHER;
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIAC, mask);
+}
+
+enum latency_range {
+ lowest_latency = 0,
+ low_latency = 1,
+ bulk_latency = 2,
+ latency_invalid = 255
+};
+
+/**
+ * ixgbevf_update_itr - update the dynamic ITR value based on statistics
+ * @adapter: pointer to adapter
+ * @eitr: eitr setting (ints per sec) to give last timeslice
+ * @itr_setting: current throttle rate in ints/second
+ * @packets: the number of packets during this measurement interval
+ * @bytes: the number of bytes during this measurement interval
+ *
+ * Stores a new ITR value based on packets and byte
+ * counts during the last interrupt. The advantage of per interrupt
+ * computation is faster updates and more accurate ITR for the current
+ * traffic pattern. Constants in this function were computed
+ * based on theoretical maximum wire speed and thresholds were set based
+ * on testing data as well as attempting to minimize response time
+ * while increasing bulk throughput.
+ **/
+static u8 ixgbevf_update_itr(struct ixgbevf_adapter *adapter,
+ u32 eitr, u8 itr_setting,
+ int packets, int bytes)
+{
+ unsigned int retval = itr_setting;
+ u32 timepassed_us;
+ u64 bytes_perint;
+
+ if (packets == 0)
+ goto update_itr_done;
+
+
+ /* simple throttlerate management
+ * 0-20MB/s lowest (100000 ints/s)
+ * 20-100MB/s low (20000 ints/s)
+ * 100-1249MB/s bulk (8000 ints/s)
+ */
+ /* what was last interrupt timeslice? */
+ timepassed_us = 1000000/eitr;
+ bytes_perint = bytes / timepassed_us; /* bytes/usec */
+
+ switch (itr_setting) {
+ case lowest_latency:
+ if (bytes_perint > adapter->eitr_low)
+ retval = low_latency;
+ break;
+ case low_latency:
+ if (bytes_perint > adapter->eitr_high)
+ retval = bulk_latency;
+ else if (bytes_perint <= adapter->eitr_low)
+ retval = lowest_latency;
+ break;
+ case bulk_latency:
+ if (bytes_perint <= adapter->eitr_high)
+ retval = low_latency;
+ break;
+ }
+
+update_itr_done:
+ return retval;
+}
+
+/**
+ * ixgbevf_write_eitr - write VTEITR register in hardware specific way
+ * @adapter: pointer to adapter struct
+ * @v_idx: vector index into q_vector array
+ * @itr_reg: new value to be written in *register* format, not ints/s
+ *
+ * This function is made to be called by ethtool and by the driver
+ * when it needs to update VTEITR registers at runtime. Hardware
+ * specific quirks/differences are taken care of here.
+ */
+static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
+ u32 itr_reg)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ itr_reg = EITR_INTS_PER_SEC_TO_REG(itr_reg);
+
+ /*
+ * set the WDIS bit to not clear the timer bits and cause an
+ * immediate assertion of the interrupt
+ */
+ itr_reg |= IXGBE_EITR_CNT_WDIS;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VTEITR(v_idx), itr_reg);
+}
+
+static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector)
+{
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ u32 new_itr;
+ u8 current_itr, ret_itr;
+ int i, r_idx, v_idx = q_vector->v_idx;
+ struct ixgbevf_ring *rx_ring, *tx_ring;
+
+ r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->txr_count; i++) {
+ tx_ring = &(adapter->tx_ring[r_idx]);
+ ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
+ q_vector->tx_itr,
+ tx_ring->total_packets,
+ tx_ring->total_bytes);
+ /* if the result for this queue would decrease interrupt
+ * rate for this vector then use that result */
+ q_vector->tx_itr = ((q_vector->tx_itr > ret_itr) ?
+ q_vector->tx_itr - 1 : ret_itr);
+ r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ rx_ring = &(adapter->rx_ring[r_idx]);
+ ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
+ q_vector->rx_itr,
+ rx_ring->total_packets,
+ rx_ring->total_bytes);
+ /* if the result for this queue would decrease interrupt
+ * rate for this vector then use that result */
+ q_vector->rx_itr = ((q_vector->rx_itr > ret_itr) ?
+ q_vector->rx_itr - 1 : ret_itr);
+ r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ current_itr = max(q_vector->rx_itr, q_vector->tx_itr);
+
+ switch (current_itr) {
+ /* counts and packets in update_itr are dependent on these numbers */
+ case lowest_latency:
+ new_itr = 100000;
+ break;
+ case low_latency:
+ new_itr = 20000; /* aka hwitr = ~200 */
+ break;
+ case bulk_latency:
+ default:
+ new_itr = 8000;
+ break;
+ }
+
+ if (new_itr != q_vector->eitr) {
+ u32 itr_reg;
+
+ /* save the algorithm value here, not the smoothed one */
+ q_vector->eitr = new_itr;
+ /* do an exponential smoothing */
+ new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
+ itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
+ ixgbevf_write_eitr(adapter, v_idx, itr_reg);
+ }
+}
+
+static irqreturn_t ixgbevf_msix_mbx(int irq, void *data)
+{
+ struct net_device *netdev = data;
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 eicr;
+ u32 msg;
+
+ eicr = IXGBE_READ_REG(hw, IXGBE_VTEICS);
+ IXGBE_WRITE_REG(hw, IXGBE_VTEICR, eicr);
+
+ if (!hw->mbx.ops.check_for_ack(hw)) {
+ /*
+ * checking for the ack clears the PFACK bit. Place
+ * it back in the v2p_mailbox cache so that anyone
+ * polling for an ack will not miss it. Also
+ * avoid the read below because the code to read
+ * the mailbox will also clear the ack bit. This was
+ * causing lost acks. Just cache the bit and exit
+ * the IRQ handler.
+ */
+ hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFACK;
+ goto out;
+ }
+
+ /* Not an ack interrupt, go ahead and read the message */
+ hw->mbx.ops.read(hw, &msg, 1);
+
+ if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG)
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + 1));
+
+out:
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data)
+{
+ struct ixgbevf_q_vector *q_vector = data;
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ struct ixgbevf_ring *tx_ring;
+ int i, r_idx;
+
+ if (!q_vector->txr_count)
+ return IRQ_HANDLED;
+
+ r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
+ for (i = 0; i < q_vector->txr_count; i++) {
+ tx_ring = &(adapter->tx_ring[r_idx]);
+ tx_ring->total_bytes = 0;
+ tx_ring->total_packets = 0;
+ ixgbevf_clean_tx_irq(adapter, tx_ring);
+ r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
+ r_idx + 1);
+ }
+
+ if (adapter->itr_setting & 1)
+ ixgbevf_set_itr_msix(q_vector);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ixgbevf_msix_clean_rx - single unshared vector rx clean (all queues)
+ * @irq: unused
+ * @data: pointer to our q_vector struct for this interrupt vector
+ **/
+static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data)
+{
+ struct ixgbevf_q_vector *q_vector = data;
+ struct ixgbevf_adapter *adapter = q_vector->adapter;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct ixgbevf_ring *rx_ring;
+ int r_idx;
+ int i;
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ for (i = 0; i < q_vector->rxr_count; i++) {
+ rx_ring = &(adapter->rx_ring[r_idx]);
+ rx_ring->total_bytes = 0;
+ rx_ring->total_packets = 0;
+ r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
+ r_idx + 1);
+ }
+
+ if (!q_vector->rxr_count)
+ return IRQ_HANDLED;
+
+ r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
+ rx_ring = &(adapter->rx_ring[r_idx]);
+ /* disable interrupts on this vector only */
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, rx_ring->v_idx);
+ napi_schedule(&q_vector->napi);
+
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ixgbevf_msix_clean_many(int irq, void *data)
+{
+ ixgbevf_msix_clean_rx(irq, data);
+ ixgbevf_msix_clean_tx(irq, data);
+
+ return IRQ_HANDLED;
+}
+
+static inline void map_vector_to_rxq(struct ixgbevf_adapter *a, int v_idx,
+ int r_idx)
+{
+ struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
+
+ set_bit(r_idx, q_vector->rxr_idx);
+ q_vector->rxr_count++;
+ a->rx_ring[r_idx].v_idx = 1 << v_idx;
+}
+
+static inline void map_vector_to_txq(struct ixgbevf_adapter *a, int v_idx,
+ int t_idx)
+{
+ struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
+
+ set_bit(t_idx, q_vector->txr_idx);
+ q_vector->txr_count++;
+ a->tx_ring[t_idx].v_idx = 1 << v_idx;
+}
+
+/**
+ * ixgbevf_map_rings_to_vectors - Maps descriptor rings to vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function maps descriptor rings to the queue-specific vectors
+ * we were allotted through the MSI-X enabling code. Ideally, we'd have
+ * one vector per ring/queue, but on a constrained vector budget, we
+ * group the rings as "efficiently" as possible. You would add new
+ * mapping configurations in here.
+ **/
+static int ixgbevf_map_rings_to_vectors(struct ixgbevf_adapter *adapter)
+{
+ int q_vectors;
+ int v_start = 0;
+ int rxr_idx = 0, txr_idx = 0;
+ int rxr_remaining = adapter->num_rx_queues;
+ int txr_remaining = adapter->num_tx_queues;
+ int i, j;
+ int rqpv, tqpv;
+ int err = 0;
+
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ /*
+ * The ideal configuration...
+ * We have enough vectors to map one per queue.
+ */
+ if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
+ for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
+ map_vector_to_rxq(adapter, v_start, rxr_idx);
+
+ for (; txr_idx < txr_remaining; v_start++, txr_idx++)
+ map_vector_to_txq(adapter, v_start, txr_idx);
+ goto out;
+ }
+
+ /*
+ * If we don't have enough vectors for a 1-to-1
+ * mapping, we'll have to group them so there are
+ * multiple queues per vector.
+ */
+ /* Re-adjusting *qpv takes care of the remainder. */
+ for (i = v_start; i < q_vectors; i++) {
+ rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
+ for (j = 0; j < rqpv; j++) {
+ map_vector_to_rxq(adapter, i, rxr_idx);
+ rxr_idx++;
+ rxr_remaining--;
+ }
+ }
+ for (i = v_start; i < q_vectors; i++) {
+ tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
+ for (j = 0; j < tqpv; j++) {
+ map_vector_to_txq(adapter, i, txr_idx);
+ txr_idx++;
+ txr_remaining--;
+ }
+ }
+
+out:
+ return err;
+}
+
+/**
+ * ixgbevf_request_msix_irqs - Initialize MSI-X interrupts
+ * @adapter: board private structure
+ *
+ * ixgbevf_request_msix_irqs allocates MSI-X vectors and requests
+ * interrupts from the kernel.
+ **/
+static int ixgbevf_request_msix_irqs(struct ixgbevf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ irqreturn_t (*handler)(int, void *);
+ int i, vector, q_vectors, err;
+ int ri = 0, ti = 0;
+
+ /* Decrement for Other and TCP Timer vectors */
+ q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+#define SET_HANDLER(_v) (((_v)->rxr_count && (_v)->txr_count) \
+ ? &ixgbevf_msix_clean_many : \
+ (_v)->rxr_count ? &ixgbevf_msix_clean_rx : \
+ (_v)->txr_count ? &ixgbevf_msix_clean_tx : \
+ NULL)
+ for (vector = 0; vector < q_vectors; vector++) {
+ handler = SET_HANDLER(adapter->q_vector[vector]);
+
+ if (handler == &ixgbevf_msix_clean_rx) {
+ sprintf(adapter->name[vector], "%s-%s-%d",
+ netdev->name, "rx", ri++);
+ } else if (handler == &ixgbevf_msix_clean_tx) {
+ sprintf(adapter->name[vector], "%s-%s-%d",
+ netdev->name, "tx", ti++);
+ } else if (handler == &ixgbevf_msix_clean_many) {
+ sprintf(adapter->name[vector], "%s-%s-%d",
+ netdev->name, "TxRx", vector);
+ } else {
+ /* skip this unused q_vector */
+ continue;
+ }
+ err = request_irq(adapter->msix_entries[vector].vector,
+ handler, 0, adapter->name[vector],
+ adapter->q_vector[vector]);
+ if (err) {
+ hw_dbg(&adapter->hw,
+ "request_irq failed for MSIX interrupt "
+ "Error: %d\n", err);
+ goto free_queue_irqs;
+ }
+ }
+
+ sprintf(adapter->name[vector], "%s:mbx", netdev->name);
+ err = request_irq(adapter->msix_entries[vector].vector,
+ &ixgbevf_msix_mbx, 0, adapter->name[vector], netdev);
+ if (err) {
+ hw_dbg(&adapter->hw,
+ "request_irq for msix_mbx failed: %d\n", err);
+ goto free_queue_irqs;
+ }
+
+ return 0;
+
+free_queue_irqs:
+ for (i = vector - 1; i >= 0; i--)
+ free_irq(adapter->msix_entries[--vector].vector,
+ &(adapter->q_vector[i]));
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ return err;
+}
+
+static inline void ixgbevf_reset_q_vectors(struct ixgbevf_adapter *adapter)
+{
+ int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ for (i = 0; i < q_vectors; i++) {
+ struct ixgbevf_q_vector *q_vector = adapter->q_vector[i];
+ bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
+ bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
+ q_vector->rxr_count = 0;
+ q_vector->txr_count = 0;
+ q_vector->eitr = adapter->eitr_param;
+ }
+}
+
+/**
+ * ixgbevf_request_irq - initialize interrupts
+ * @adapter: board private structure
+ *
+ * Attempts to configure interrupts using the best available
+ * capabilities of the hardware and kernel.
+ **/
+static int ixgbevf_request_irq(struct ixgbevf_adapter *adapter)
+{
+ int err = 0;
+
+ err = ixgbevf_request_msix_irqs(adapter);
+
+ if (err)
+ hw_dbg(&adapter->hw,
+ "request_irq failed, Error %d\n", err);
+
+ return err;
+}
+
+static void ixgbevf_free_irq(struct ixgbevf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i, q_vectors;
+
+ q_vectors = adapter->num_msix_vectors;
+
+ i = q_vectors - 1;
+
+ free_irq(adapter->msix_entries[i].vector, netdev);
+ i--;
+
+ for (; i >= 0; i--) {
+ free_irq(adapter->msix_entries[i].vector,
+ adapter->q_vector[i]);
+ }
+
+ ixgbevf_reset_q_vectors(adapter);
+}
+
+/**
+ * ixgbevf_irq_disable - Mask off interrupt generation on the NIC
+ * @adapter: board private structure
+ **/
+static inline void ixgbevf_irq_disable(struct ixgbevf_adapter *adapter)
+{
+ int i;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, ~0);
+
+ IXGBE_WRITE_FLUSH(hw);
+
+ for (i = 0; i < adapter->num_msix_vectors; i++)
+ synchronize_irq(adapter->msix_entries[i].vector);
+}
+
+/**
+ * ixgbevf_irq_enable - Enable default interrupt generation settings
+ * @adapter: board private structure
+ **/
+static inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter,
+ bool queues, bool flush)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 mask;
+ u64 qmask;
+
+ mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
+ qmask = ~0;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
+
+ if (queues)
+ ixgbevf_irq_enable_queues(adapter, qmask);
+
+ if (flush)
+ IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ * ixgbevf_configure_tx - Configure 82599 VF Transmit Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Tx unit of the MAC after a reset.
+ **/
+static void ixgbevf_configure_tx(struct ixgbevf_adapter *adapter)
+{
+ u64 tdba;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 i, j, tdlen, txctrl;
+
+ /* Setup the HW Tx Head and Tail descriptor pointers */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ struct ixgbevf_ring *ring = &adapter->tx_ring[i];
+ j = ring->reg_idx;
+ tdba = ring->dma;
+ tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDBAL(j),
+ (tdba & DMA_BIT_MASK(32)));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDBAH(j), (tdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDLEN(j), tdlen);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDH(j), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTDT(j), 0);
+ adapter->tx_ring[i].head = IXGBE_VFTDH(j);
+ adapter->tx_ring[i].tail = IXGBE_VFTDT(j);
+ /* Disable Tx Head Writeback RO bit, since this hoses
+ * bookkeeping if things aren't delivered in order.
+ */
+ txctrl = IXGBE_READ_REG(hw, IXGBE_VFDCA_TXCTRL(j));
+ txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(j), txctrl);
+ }
+}
+
+#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
+
+static void ixgbevf_configure_srrctl(struct ixgbevf_adapter *adapter, int index)
+{
+ struct ixgbevf_ring *rx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 srrctl;
+
+ rx_ring = &adapter->rx_ring[index];
+
+ srrctl = IXGBE_SRRCTL_DROP_EN;
+
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ u16 bufsz = IXGBEVF_RXBUFFER_2048;
+ /* grow the amount we can receive on large page machines */
+ if (bufsz < (PAGE_SIZE / 2))
+ bufsz = (PAGE_SIZE / 2);
+ /* cap the bufsz at our largest descriptor size */
+ bufsz = min((u16)IXGBEVF_MAX_RXBUFFER, bufsz);
+
+ srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+ srrctl |= ((IXGBEVF_RX_HDR_SIZE <<
+ IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
+ IXGBE_SRRCTL_BSIZEHDR_MASK);
+ } else {
+ srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+
+ if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
+ srrctl |= IXGBEVF_RXBUFFER_2048 >>
+ IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ else
+ srrctl |= rx_ring->rx_buf_len >>
+ IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(index), srrctl);
+}
+
+/**
+ * ixgbevf_configure_rx - Configure 82599 VF Receive Unit after Reset
+ * @adapter: board private structure
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+static void ixgbevf_configure_rx(struct ixgbevf_adapter *adapter)
+{
+ u64 rdba;
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+ int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
+ int i, j;
+ u32 rdlen;
+ int rx_buf_len;
+
+ /* Decide whether to use packet split mode or not */
+ if (netdev->mtu > ETH_DATA_LEN) {
+ if (adapter->flags & IXGBE_FLAG_RX_PS_CAPABLE)
+ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+ else
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+ } else {
+ if (adapter->flags & IXGBE_FLAG_RX_1BUF_CAPABLE)
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+ else
+ adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
+ }
+
+ /* Set the RX buffer length according to the mode */
+ if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
+ /* PSRTYPE must be initialized in 82599 */
+ u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
+ IXGBE_PSRTYPE_UDPHDR |
+ IXGBE_PSRTYPE_IPV4HDR |
+ IXGBE_PSRTYPE_IPV6HDR |
+ IXGBE_PSRTYPE_L2HDR;
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, psrtype);
+ rx_buf_len = IXGBEVF_RX_HDR_SIZE;
+ } else {
+ IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
+ if (netdev->mtu <= ETH_DATA_LEN)
+ rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+ else
+ rx_buf_len = ALIGN(max_frame, 1024);
+ }
+
+ rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
+ /* Setup the HW Rx Head and Tail Descriptor Pointers and
+ * the Base and Length of the Rx Descriptor Ring */
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ rdba = adapter->rx_ring[i].dma;
+ j = adapter->rx_ring[i].reg_idx;
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDBAL(j),
+ (rdba & DMA_BIT_MASK(32)));
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDBAH(j), (rdba >> 32));
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDLEN(j), rdlen);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDH(j), 0);
+ IXGBE_WRITE_REG(hw, IXGBE_VFRDT(j), 0);
+ adapter->rx_ring[i].head = IXGBE_VFRDH(j);
+ adapter->rx_ring[i].tail = IXGBE_VFRDT(j);
+ adapter->rx_ring[i].rx_buf_len = rx_buf_len;
+
+ ixgbevf_configure_srrctl(adapter, j);
+ }
+}
+
+static void ixgbevf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* add VID to filter table */
+ if (hw->mac.ops.set_vfta)
+ hw->mac.ops.set_vfta(hw, vid, 0, true);
+ set_bit(vid, adapter->active_vlans);
+}
+
+static void ixgbevf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* remove VID from filter table */
+ if (hw->mac.ops.set_vfta)
+ hw->mac.ops.set_vfta(hw, vid, 0, false);
+ clear_bit(vid, adapter->active_vlans);
+}
+
+static void ixgbevf_restore_vlan(struct ixgbevf_adapter *adapter)
+{
+ u16 vid;
+
+ for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
+ ixgbevf_vlan_rx_add_vid(adapter->netdev, vid);
+}
+
+static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int count = 0;
+
+ if ((netdev_uc_count(netdev)) > 10) {
+ printk(KERN_ERR "Too many unicast filters - No Space\n");
+ return -ENOSPC;
+ }
+
+ if (!netdev_uc_empty(netdev)) {
+ struct netdev_hw_addr *ha;
+ netdev_for_each_uc_addr(ha, netdev) {
+ hw->mac.ops.set_uc_addr(hw, ++count, ha->addr);
+ udelay(200);
+ }
+ } else {
+ /*
+ * If the list is empty then send message to PF driver to
+ * clear all macvlans on this VF.
+ */
+ hw->mac.ops.set_uc_addr(hw, 0, NULL);
+ }
+
+ return count;
+}
+
+/**
+ * ixgbevf_set_rx_mode - Multicast set
+ * @netdev: network interface device structure
+ *
+ * The set_rx_method entry point is called whenever the multicast address
+ * list or the network interface flags are updated. This routine is
+ * responsible for configuring the hardware for proper multicast mode.
+ **/
+static void ixgbevf_set_rx_mode(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ /* reprogram multicast list */
+ if (hw->mac.ops.update_mc_addr_list)
+ hw->mac.ops.update_mc_addr_list(hw, netdev);
+
+ ixgbevf_write_uc_addr_list(netdev);
+}
+
+static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbevf_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ struct napi_struct *napi;
+ q_vector = adapter->q_vector[q_idx];
+ if (!q_vector->rxr_count)
+ continue;
+ napi = &q_vector->napi;
+ if (q_vector->rxr_count > 1)
+ napi->poll = &ixgbevf_clean_rxonly_many;
+
+ napi_enable(napi);
+ }
+}
+
+static void ixgbevf_napi_disable_all(struct ixgbevf_adapter *adapter)
+{
+ int q_idx;
+ struct ixgbevf_q_vector *q_vector;
+ int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+
+ for (q_idx = 0; q_idx < q_vectors; q_idx++) {
+ q_vector = adapter->q_vector[q_idx];
+ if (!q_vector->rxr_count)
+ continue;
+ napi_disable(&q_vector->napi);
+ }
+}
+
+static void ixgbevf_configure(struct ixgbevf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ int i;
+
+ ixgbevf_set_rx_mode(netdev);
+
+ ixgbevf_restore_vlan(adapter);
+
+ ixgbevf_configure_tx(adapter);
+ ixgbevf_configure_rx(adapter);
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ struct ixgbevf_ring *ring = &adapter->rx_ring[i];
+ ixgbevf_alloc_rx_buffers(adapter, ring, ring->count);
+ ring->next_to_use = ring->count - 1;
+ writel(ring->next_to_use, adapter->hw.hw_addr + ring->tail);
+ }
+}
+
+#define IXGBE_MAX_RX_DESC_POLL 10
+static inline void ixgbevf_rx_desc_queue_enable(struct ixgbevf_adapter *adapter,
+ int rxr)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ int j = adapter->rx_ring[rxr].reg_idx;
+ int k;
+
+ for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) {
+ if (IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
+ break;
+ else
+ msleep(1);
+ }
+ if (k >= IXGBE_MAX_RX_DESC_POLL) {
+ hw_dbg(hw, "RXDCTL.ENABLE on Rx queue %d "
+ "not set within the polling period\n", rxr);
+ }
+
+ ixgbevf_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr],
+ (adapter->rx_ring[rxr].count - 1));
+}
+
+static void ixgbevf_save_reset_stats(struct ixgbevf_adapter *adapter)
+{
+ /* Only save pre-reset stats if there are some */
+ if (adapter->stats.vfgprc || adapter->stats.vfgptc) {
+ adapter->stats.saved_reset_vfgprc += adapter->stats.vfgprc -
+ adapter->stats.base_vfgprc;
+ adapter->stats.saved_reset_vfgptc += adapter->stats.vfgptc -
+ adapter->stats.base_vfgptc;
+ adapter->stats.saved_reset_vfgorc += adapter->stats.vfgorc -
+ adapter->stats.base_vfgorc;
+ adapter->stats.saved_reset_vfgotc += adapter->stats.vfgotc -
+ adapter->stats.base_vfgotc;
+ adapter->stats.saved_reset_vfmprc += adapter->stats.vfmprc -
+ adapter->stats.base_vfmprc;
+ }
+}
+
+static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
+ adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
+ adapter->stats.last_vfgorc |=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
+ adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
+ adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
+ adapter->stats.last_vfgotc |=
+ (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
+ adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
+
+ adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
+ adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
+ adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
+ adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
+ adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
+}
+
+static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ int i, j = 0;
+ int num_rx_rings = adapter->num_rx_queues;
+ u32 txdctl, rxdctl;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ j = adapter->tx_ring[i].reg_idx;
+ txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+ /* enable WTHRESH=8 descriptors, to encourage burst writeback */
+ txdctl |= (8 << 16);
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
+ }
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ j = adapter->tx_ring[i].reg_idx;
+ txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+ txdctl |= IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
+ }
+
+ for (i = 0; i < num_rx_rings; i++) {
+ j = adapter->rx_ring[i].reg_idx;
+ rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
+ rxdctl |= IXGBE_RXDCTL_ENABLE | IXGBE_RXDCTL_VME;
+ if (hw->mac.type == ixgbe_mac_X540_vf) {
+ rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
+ rxdctl |= ((netdev->mtu + ETH_HLEN + ETH_FCS_LEN) |
+ IXGBE_RXDCTL_RLPML_EN);
+ }
+ IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), rxdctl);
+ ixgbevf_rx_desc_queue_enable(adapter, i);
+ }
+
+ ixgbevf_configure_msix(adapter);
+
+ if (hw->mac.ops.set_rar) {
+ if (is_valid_ether_addr(hw->mac.addr))
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+ else
+ hw->mac.ops.set_rar(hw, 0, hw->mac.perm_addr, 0);
+ }
+
+ clear_bit(__IXGBEVF_DOWN, &adapter->state);
+ ixgbevf_napi_enable_all(adapter);
+
+ /* enable transmits */
+ netif_tx_start_all_queues(netdev);
+
+ ixgbevf_save_reset_stats(adapter);
+ ixgbevf_init_last_counter_stats(adapter);
+
+ /* bring the link up in the watchdog, this could race with our first
+ * link up interrupt but shouldn't be a problem */
+ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
+ adapter->link_check_timeout = jiffies;
+ mod_timer(&adapter->watchdog_timer, jiffies);
+ return 0;
+}
+
+int ixgbevf_up(struct ixgbevf_adapter *adapter)
+{
+ int err;
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ ixgbevf_configure(adapter);
+
+ err = ixgbevf_up_complete(adapter);
+
+ /* clear any pending interrupts, may auto mask */
+ IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+ ixgbevf_irq_enable(adapter, true, true);
+
+ return err;
+}
+
+/**
+ * ixgbevf_clean_rx_ring - Free Rx Buffers per Queue
+ * @adapter: board private structure
+ * @rx_ring: ring to free buffers from
+ **/
+static void ixgbevf_clean_rx_ring(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned long size;
+ unsigned int i;
+
+ if (!rx_ring->rx_buffer_info)
+ return;
+
+ /* Free all the Rx ring sk_buffs */
+ for (i = 0; i < rx_ring->count; i++) {
+ struct ixgbevf_rx_buffer *rx_buffer_info;
+
+ rx_buffer_info = &rx_ring->rx_buffer_info[i];
+ if (rx_buffer_info->dma) {
+ dma_unmap_single(&pdev->dev, rx_buffer_info->dma,
+ rx_ring->rx_buf_len,
+ DMA_FROM_DEVICE);
+ rx_buffer_info->dma = 0;
+ }
+ if (rx_buffer_info->skb) {
+ struct sk_buff *skb = rx_buffer_info->skb;
+ rx_buffer_info->skb = NULL;
+ do {
+ struct sk_buff *this = skb;
+ skb = skb->prev;
+ dev_kfree_skb(this);
+ } while (skb);
+ }
+ if (!rx_buffer_info->page)
+ continue;
+ dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
+ PAGE_SIZE / 2, DMA_FROM_DEVICE);
+ rx_buffer_info->page_dma = 0;
+ put_page(rx_buffer_info->page);
+ rx_buffer_info->page = NULL;
+ rx_buffer_info->page_offset = 0;
+ }
+
+ size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
+ memset(rx_ring->rx_buffer_info, 0, size);
+
+ /* Zero out the descriptor ring */
+ memset(rx_ring->desc, 0, rx_ring->size);
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ if (rx_ring->head)
+ writel(0, adapter->hw.hw_addr + rx_ring->head);
+ if (rx_ring->tail)
+ writel(0, adapter->hw.hw_addr + rx_ring->tail);
+}
+
+/**
+ * ixgbevf_clean_tx_ring - Free Tx Buffers
+ * @adapter: board private structure
+ * @tx_ring: ring to be cleaned
+ **/
+static void ixgbevf_clean_tx_ring(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring)
+{
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ unsigned long size;
+ unsigned int i;
+
+ if (!tx_ring->tx_buffer_info)
+ return;
+
+ /* Free all the Tx ring sk_buffs */
+
+ for (i = 0; i < tx_ring->count; i++) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+ }
+
+ size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
+ memset(tx_ring->tx_buffer_info, 0, size);
+
+ memset(tx_ring->desc, 0, tx_ring->size);
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+
+ if (tx_ring->head)
+ writel(0, adapter->hw.hw_addr + tx_ring->head);
+ if (tx_ring->tail)
+ writel(0, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+/**
+ * ixgbevf_clean_all_rx_rings - Free Rx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbevf_clean_all_rx_rings(struct ixgbevf_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ ixgbevf_clean_rx_ring(adapter, &adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbevf_clean_all_tx_rings - Free Tx Buffers for all queues
+ * @adapter: board private structure
+ **/
+static void ixgbevf_clean_all_tx_rings(struct ixgbevf_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ ixgbevf_clean_tx_ring(adapter, &adapter->tx_ring[i]);
+}
+
+void ixgbevf_down(struct ixgbevf_adapter *adapter)
+{
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 txdctl;
+ int i, j;
+
+ /* signal that we are down to the interrupt handler */
+ set_bit(__IXGBEVF_DOWN, &adapter->state);
+ /* disable receives */
+
+ netif_tx_disable(netdev);
+
+ msleep(10);
+
+ netif_tx_stop_all_queues(netdev);
+
+ ixgbevf_irq_disable(adapter);
+
+ ixgbevf_napi_disable_all(adapter);
+
+ del_timer_sync(&adapter->watchdog_timer);
+ /* can't call flush scheduled work here because it can deadlock
+ * if linkwatch_event tries to acquire the rtnl_lock which we are
+ * holding */
+ while (adapter->flags & IXGBE_FLAG_IN_WATCHDOG_TASK)
+ msleep(1);
+
+ /* disable transmits in the hardware now that interrupts are off */
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ j = adapter->tx_ring[i].reg_idx;
+ txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j),
+ (txdctl & ~IXGBE_TXDCTL_ENABLE));
+ }
+
+ netif_carrier_off(netdev);
+
+ if (!pci_channel_offline(adapter->pdev))
+ ixgbevf_reset(adapter);
+
+ ixgbevf_clean_all_tx_rings(adapter);
+ ixgbevf_clean_all_rx_rings(adapter);
+}
+
+void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ WARN_ON(in_interrupt());
+
+ while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
+ msleep(1);
+
+ /*
+ * Check if PF is up before re-init. If not then skip until
+ * later when the PF is up and ready to service requests from
+ * the VF via mailbox. If the VF is up and running then the
+ * watchdog task will continue to schedule reset tasks until
+ * the PF is up and running.
+ */
+ if (!hw->mac.ops.reset_hw(hw)) {
+ ixgbevf_down(adapter);
+ ixgbevf_up(adapter);
+ }
+
+ clear_bit(__IXGBEVF_RESETTING, &adapter->state);
+}
+
+void ixgbevf_reset(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct net_device *netdev = adapter->netdev;
+
+ if (hw->mac.ops.reset_hw(hw))
+ hw_dbg(hw, "PF still resetting\n");
+ else
+ hw->mac.ops.init_hw(hw);
+
+ if (is_valid_ether_addr(adapter->hw.mac.addr)) {
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr,
+ netdev->addr_len);
+ }
+}
+
+static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
+ int vectors)
+{
+ int err, vector_threshold;
+
+ /* We'll want at least 3 (vector_threshold):
+ * 1) TxQ[0] Cleanup
+ * 2) RxQ[0] Cleanup
+ * 3) Other (Link Status Change, etc.)
+ */
+ vector_threshold = MIN_MSIX_COUNT;
+
+ /* The more we get, the more we will assign to Tx/Rx Cleanup
+ * for the separate queues...where Rx Cleanup >= Tx Cleanup.
+ * Right now, we simply care about how many we'll get; we'll
+ * set them up later while requesting irq's.
+ */
+ while (vectors >= vector_threshold) {
+ err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
+ vectors);
+ if (!err) /* Success in acquiring all requested vectors. */
+ break;
+ else if (err < 0)
+ vectors = 0; /* Nasty failure, quit now */
+ else /* err == number of vectors we should try again with */
+ vectors = err;
+ }
+
+ if (vectors < vector_threshold) {
+ /* Can't allocate enough MSI-X interrupts? Oh well.
+ * This just means we'll go with either a single MSI
+ * vector or fall back to legacy interrupts.
+ */
+ hw_dbg(&adapter->hw,
+ "Unable to allocate MSI-X interrupts\n");
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+ } else {
+ /*
+ * Adjust for only the vectors we'll use, which is minimum
+ * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+ * vectors we were allocated.
+ */
+ adapter->num_msix_vectors = vectors;
+ }
+}
+
+/*
+ * ixgbevf_set_num_queues: Allocate queues for device, feature dependent
+ * @adapter: board private structure to initialize
+ *
+ * This is the top level queue allocation routine. The order here is very
+ * important, starting with the "most" number of features turned on at once,
+ * and ending with the smallest set of features. This way large combinations
+ * can be allocated if they're turned on, and smaller combinations are the
+ * fallthrough conditions.
+ *
+ **/
+static void ixgbevf_set_num_queues(struct ixgbevf_adapter *adapter)
+{
+ /* Start with base case */
+ adapter->num_rx_queues = 1;
+ adapter->num_tx_queues = 1;
+ adapter->num_rx_pools = adapter->num_rx_queues;
+ adapter->num_rx_queues_per_pool = 1;
+}
+
+/**
+ * ixgbevf_alloc_queues - Allocate memory for all rings
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one ring per queue at run-time since we don't know the
+ * number of queues at compile-time. The polling_netdev array is
+ * intended for Multiqueue, but should work fine with a single queue.
+ **/
+static int ixgbevf_alloc_queues(struct ixgbevf_adapter *adapter)
+{
+ int i;
+
+ adapter->tx_ring = kcalloc(adapter->num_tx_queues,
+ sizeof(struct ixgbevf_ring), GFP_KERNEL);
+ if (!adapter->tx_ring)
+ goto err_tx_ring_allocation;
+
+ adapter->rx_ring = kcalloc(adapter->num_rx_queues,
+ sizeof(struct ixgbevf_ring), GFP_KERNEL);
+ if (!adapter->rx_ring)
+ goto err_rx_ring_allocation;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ adapter->tx_ring[i].count = adapter->tx_ring_count;
+ adapter->tx_ring[i].queue_index = i;
+ adapter->tx_ring[i].reg_idx = i;
+ }
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ adapter->rx_ring[i].count = adapter->rx_ring_count;
+ adapter->rx_ring[i].queue_index = i;
+ adapter->rx_ring[i].reg_idx = i;
+ }
+
+ return 0;
+
+err_rx_ring_allocation:
+ kfree(adapter->tx_ring);
+err_tx_ring_allocation:
+ return -ENOMEM;
+}
+
+/**
+ * ixgbevf_set_interrupt_capability - set MSI-X or FAIL if not supported
+ * @adapter: board private structure to initialize
+ *
+ * Attempt to configure the interrupts using the best available
+ * capabilities of the hardware and the kernel.
+ **/
+static int ixgbevf_set_interrupt_capability(struct ixgbevf_adapter *adapter)
+{
+ int err = 0;
+ int vector, v_budget;
+
+ /*
+ * It's easy to be greedy for MSI-X vectors, but it really
+ * doesn't do us much good if we have a lot more vectors
+ * than CPU's. So let's be conservative and only ask for
+ * (roughly) twice the number of vectors as there are CPU's.
+ */
+ v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
+ (int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
+
+ /* A failure in MSI-X entry allocation isn't fatal, but it does
+ * mean we disable MSI-X capabilities of the adapter. */
+ adapter->msix_entries = kcalloc(v_budget,
+ sizeof(struct msix_entry), GFP_KERNEL);
+ if (!adapter->msix_entries) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ for (vector = 0; vector < v_budget; vector++)
+ adapter->msix_entries[vector].entry = vector;
+
+ ixgbevf_acquire_msix_vectors(adapter, v_budget);
+
+out:
+ return err;
+}
+
+/**
+ * ixgbevf_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt. If allocation fails we
+ * return -ENOMEM.
+ **/
+static int ixgbevf_alloc_q_vectors(struct ixgbevf_adapter *adapter)
+{
+ int q_idx, num_q_vectors;
+ struct ixgbevf_q_vector *q_vector;
+ int napi_vectors;
+ int (*poll)(struct napi_struct *, int);
+
+ num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ napi_vectors = adapter->num_rx_queues;
+ poll = &ixgbevf_clean_rxonly;
+
+ for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+ q_vector = kzalloc(sizeof(struct ixgbevf_q_vector), GFP_KERNEL);
+ if (!q_vector)
+ goto err_out;
+ q_vector->adapter = adapter;
+ q_vector->v_idx = q_idx;
+ q_vector->eitr = adapter->eitr_param;
+ if (q_idx < napi_vectors)
+ netif_napi_add(adapter->netdev, &q_vector->napi,
+ (*poll), 64);
+ adapter->q_vector[q_idx] = q_vector;
+ }
+
+ return 0;
+
+err_out:
+ while (q_idx) {
+ q_idx--;
+ q_vector = adapter->q_vector[q_idx];
+ netif_napi_del(&q_vector->napi);
+ kfree(q_vector);
+ adapter->q_vector[q_idx] = NULL;
+ }
+ return -ENOMEM;
+}
+
+/**
+ * ixgbevf_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors. In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void ixgbevf_free_q_vectors(struct ixgbevf_adapter *adapter)
+{
+ int q_idx, num_q_vectors;
+ int napi_vectors;
+
+ num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
+ napi_vectors = adapter->num_rx_queues;
+
+ for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
+ struct ixgbevf_q_vector *q_vector = adapter->q_vector[q_idx];
+
+ adapter->q_vector[q_idx] = NULL;
+ if (q_idx < napi_vectors)
+ netif_napi_del(&q_vector->napi);
+ kfree(q_vector);
+ }
+}
+
+/**
+ * ixgbevf_reset_interrupt_capability - Reset MSIX setup
+ * @adapter: board private structure
+ *
+ **/
+static void ixgbevf_reset_interrupt_capability(struct ixgbevf_adapter *adapter)
+{
+ pci_disable_msix(adapter->pdev);
+ kfree(adapter->msix_entries);
+ adapter->msix_entries = NULL;
+}
+
+/**
+ * ixgbevf_init_interrupt_scheme - Determine if MSIX is supported and init
+ * @adapter: board private structure to initialize
+ *
+ **/
+static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
+{
+ int err;
+
+ /* Number of supported queues */
+ ixgbevf_set_num_queues(adapter);
+
+ err = ixgbevf_set_interrupt_capability(adapter);
+ if (err) {
+ hw_dbg(&adapter->hw,
+ "Unable to setup interrupt capabilities\n");
+ goto err_set_interrupt;
+ }
+
+ err = ixgbevf_alloc_q_vectors(adapter);
+ if (err) {
+ hw_dbg(&adapter->hw, "Unable to allocate memory for queue "
+ "vectors\n");
+ goto err_alloc_q_vectors;
+ }
+
+ err = ixgbevf_alloc_queues(adapter);
+ if (err) {
+ printk(KERN_ERR "Unable to allocate memory for queues\n");
+ goto err_alloc_queues;
+ }
+
+ hw_dbg(&adapter->hw, "Multiqueue %s: Rx Queue count = %u, "
+ "Tx Queue count = %u\n",
+ (adapter->num_rx_queues > 1) ? "Enabled" :
+ "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
+
+ set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+ return 0;
+err_alloc_queues:
+ ixgbevf_free_q_vectors(adapter);
+err_alloc_q_vectors:
+ ixgbevf_reset_interrupt_capability(adapter);
+err_set_interrupt:
+ return err;
+}
+
+/**
+ * ixgbevf_sw_init - Initialize general software structures
+ * (struct ixgbevf_adapter)
+ * @adapter: board private structure to initialize
+ *
+ * ixgbevf_sw_init initializes the Adapter private data structure.
+ * Fields are initialized based on PCI device information and
+ * OS network device settings (MTU size).
+ **/
+static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct pci_dev *pdev = adapter->pdev;
+ int err;
+
+ /* PCI config space info */
+
+ hw->vendor_id = pdev->vendor;
+ hw->device_id = pdev->device;
+ hw->revision_id = pdev->revision;
+ hw->subsystem_vendor_id = pdev->subsystem_vendor;
+ hw->subsystem_device_id = pdev->subsystem_device;
+
+ hw->mbx.ops.init_params(hw);
+ hw->mac.max_tx_queues = MAX_TX_QUEUES;
+ hw->mac.max_rx_queues = MAX_RX_QUEUES;
+ err = hw->mac.ops.reset_hw(hw);
+ if (err) {
+ dev_info(&pdev->dev,
+ "PF still in reset state, assigning new address\n");
+ dev_hw_addr_random(adapter->netdev, hw->mac.addr);
+ } else {
+ err = hw->mac.ops.init_hw(hw);
+ if (err) {
+ printk(KERN_ERR "init_shared_code failed: %d\n", err);
+ goto out;
+ }
+ }
+
+ /* Enable dynamic interrupt throttling rates */
+ adapter->eitr_param = 20000;
+ adapter->itr_setting = 1;
+
+ /* set defaults for eitr in MegaBytes */
+ adapter->eitr_low = 10;
+ adapter->eitr_high = 20;
+
+ /* set default ring sizes */
+ adapter->tx_ring_count = IXGBEVF_DEFAULT_TXD;
+ adapter->rx_ring_count = IXGBEVF_DEFAULT_RXD;
+
+ /* enable rx csum by default */
+ adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
+
+ set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+out:
+ return err;
+}
+
+#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter) \
+ { \
+ u32 current_counter = IXGBE_READ_REG(hw, reg); \
+ if (current_counter < last_counter) \
+ counter += 0x100000000LL; \
+ last_counter = current_counter; \
+ counter &= 0xFFFFFFFF00000000LL; \
+ counter |= current_counter; \
+ }
+
+#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \
+ { \
+ u64 current_counter_lsb = IXGBE_READ_REG(hw, reg_lsb); \
+ u64 current_counter_msb = IXGBE_READ_REG(hw, reg_msb); \
+ u64 current_counter = (current_counter_msb << 32) | \
+ current_counter_lsb; \
+ if (current_counter < last_counter) \
+ counter += 0x1000000000LL; \
+ last_counter = current_counter; \
+ counter &= 0xFFFFFFF000000000LL; \
+ counter |= current_counter; \
+ }
+/**
+ * ixgbevf_update_stats - Update the board statistics counters.
+ * @adapter: board private structure
+ **/
+void ixgbevf_update_stats(struct ixgbevf_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+
+ UPDATE_VF_COUNTER_32bit(IXGBE_VFGPRC, adapter->stats.last_vfgprc,
+ adapter->stats.vfgprc);
+ UPDATE_VF_COUNTER_32bit(IXGBE_VFGPTC, adapter->stats.last_vfgptc,
+ adapter->stats.vfgptc);
+ UPDATE_VF_COUNTER_36bit(IXGBE_VFGORC_LSB, IXGBE_VFGORC_MSB,
+ adapter->stats.last_vfgorc,
+ adapter->stats.vfgorc);
+ UPDATE_VF_COUNTER_36bit(IXGBE_VFGOTC_LSB, IXGBE_VFGOTC_MSB,
+ adapter->stats.last_vfgotc,
+ adapter->stats.vfgotc);
+ UPDATE_VF_COUNTER_32bit(IXGBE_VFMPRC, adapter->stats.last_vfmprc,
+ adapter->stats.vfmprc);
+
+ /* Fill out the OS statistics structure */
+ adapter->netdev->stats.multicast = adapter->stats.vfmprc -
+ adapter->stats.base_vfmprc;
+}
+
+/**
+ * ixgbevf_watchdog - Timer Call-back
+ * @data: pointer to adapter cast into an unsigned long
+ **/
+static void ixgbevf_watchdog(unsigned long data)
+{
+ struct ixgbevf_adapter *adapter = (struct ixgbevf_adapter *)data;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u64 eics = 0;
+ int i;
+
+ /*
+ * Do the watchdog outside of interrupt context due to the lovely
+ * delays that some of the newer hardware requires
+ */
+
+ if (test_bit(__IXGBEVF_DOWN, &adapter->state))
+ goto watchdog_short_circuit;
+
+ /* get one bit for every active tx/rx interrupt vector */
+ for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
+ struct ixgbevf_q_vector *qv = adapter->q_vector[i];
+ if (qv->rxr_count || qv->txr_count)
+ eics |= (1 << i);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_VTEICS, (u32)eics);
+
+watchdog_short_circuit:
+ schedule_work(&adapter->watchdog_task);
+}
+
+/**
+ * ixgbevf_tx_timeout - Respond to a Tx Hang
+ * @netdev: network interface device structure
+ **/
+static void ixgbevf_tx_timeout(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ /* Do the reset outside of interrupt context */
+ schedule_work(&adapter->reset_task);
+}
+
+static void ixgbevf_reset_task(struct work_struct *work)
+{
+ struct ixgbevf_adapter *adapter;
+ adapter = container_of(work, struct ixgbevf_adapter, reset_task);
+
+ /* If we're already down or resetting, just bail */
+ if (test_bit(__IXGBEVF_DOWN, &adapter->state) ||
+ test_bit(__IXGBEVF_RESETTING, &adapter->state))
+ return;
+
+ adapter->tx_timeout_count++;
+
+ ixgbevf_reinit_locked(adapter);
+}
+
+/**
+ * ixgbevf_watchdog_task - worker thread to bring link up
+ * @work: pointer to work_struct containing our data
+ **/
+static void ixgbevf_watchdog_task(struct work_struct *work)
+{
+ struct ixgbevf_adapter *adapter = container_of(work,
+ struct ixgbevf_adapter,
+ watchdog_task);
+ struct net_device *netdev = adapter->netdev;
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 link_speed = adapter->link_speed;
+ bool link_up = adapter->link_up;
+
+ adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
+
+ /*
+ * Always check the link on the watchdog because we have
+ * no LSC interrupt
+ */
+ if (hw->mac.ops.check_link) {
+ if ((hw->mac.ops.check_link(hw, &link_speed,
+ &link_up, false)) != 0) {
+ adapter->link_up = link_up;
+ adapter->link_speed = link_speed;
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+ schedule_work(&adapter->reset_task);
+ goto pf_has_reset;
+ }
+ } else {
+ /* always assume link is up, if no check link
+ * function */
+ link_speed = IXGBE_LINK_SPEED_10GB_FULL;
+ link_up = true;
+ }
+ adapter->link_up = link_up;
+ adapter->link_speed = link_speed;
+
+ if (link_up) {
+ if (!netif_carrier_ok(netdev)) {
+ hw_dbg(&adapter->hw, "NIC Link is Up, %u Gbps\n",
+ (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
+ 10 : 1);
+ netif_carrier_on(netdev);
+ netif_tx_wake_all_queues(netdev);
+ }
+ } else {
+ adapter->link_up = false;
+ adapter->link_speed = 0;
+ if (netif_carrier_ok(netdev)) {
+ hw_dbg(&adapter->hw, "NIC Link is Down\n");
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+ }
+ }
+
+ ixgbevf_update_stats(adapter);
+
+pf_has_reset:
+ /* Reset the timer */
+ if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
+ mod_timer(&adapter->watchdog_timer,
+ round_jiffies(jiffies + (2 * HZ)));
+
+ adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
+}
+
+/**
+ * ixgbevf_free_tx_resources - Free Tx Resources per Queue
+ * @adapter: board private structure
+ * @tx_ring: Tx descriptor ring for a specific queue
+ *
+ * Free all transmit software resources
+ **/
+void ixgbevf_free_tx_resources(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgbevf_clean_tx_ring(adapter, tx_ring);
+
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
+ tx_ring->dma);
+
+ tx_ring->desc = NULL;
+}
+
+/**
+ * ixgbevf_free_all_tx_resources - Free Tx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all transmit software resources
+ **/
+static void ixgbevf_free_all_tx_resources(struct ixgbevf_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_tx_queues; i++)
+ if (adapter->tx_ring[i].desc)
+ ixgbevf_free_tx_resources(adapter,
+ &adapter->tx_ring[i]);
+
+}
+
+/**
+ * ixgbevf_setup_tx_resources - allocate Tx resources (Descriptors)
+ * @adapter: board private structure
+ * @tx_ring: tx descriptor ring (for a specific queue) to setup
+ *
+ * Return 0 on success, negative on failure
+ **/
+int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
+ tx_ring->tx_buffer_info = vzalloc(size);
+ if (!tx_ring->tx_buffer_info)
+ goto err;
+
+ /* round up to nearest 4K */
+ tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
+ tx_ring->size = ALIGN(tx_ring->size, 4096);
+
+ tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
+ &tx_ring->dma, GFP_KERNEL);
+ if (!tx_ring->desc)
+ goto err;
+
+ tx_ring->next_to_use = 0;
+ tx_ring->next_to_clean = 0;
+ tx_ring->work_limit = tx_ring->count;
+ return 0;
+
+err:
+ vfree(tx_ring->tx_buffer_info);
+ tx_ring->tx_buffer_info = NULL;
+ hw_dbg(&adapter->hw, "Unable to allocate memory for the transmit "
+ "descriptor ring\n");
+ return -ENOMEM;
+}
+
+/**
+ * ixgbevf_setup_all_tx_resources - allocate all queues Tx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbevf_setup_all_tx_resources(struct ixgbevf_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_tx_queues; i++) {
+ err = ixgbevf_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+ if (!err)
+ continue;
+ hw_dbg(&adapter->hw,
+ "Allocation for Tx Queue %u failed\n", i);
+ break;
+ }
+
+ return err;
+}
+
+/**
+ * ixgbevf_setup_rx_resources - allocate Rx resources (Descriptors)
+ * @adapter: board private structure
+ * @rx_ring: rx descriptor ring (for a specific queue) to setup
+ *
+ * Returns 0 on success, negative on failure
+ **/
+int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ int size;
+
+ size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
+ rx_ring->rx_buffer_info = vzalloc(size);
+ if (!rx_ring->rx_buffer_info) {
+ hw_dbg(&adapter->hw,
+ "Unable to vmalloc buffer memory for "
+ "the receive descriptor ring\n");
+ goto alloc_failed;
+ }
+
+ /* Round up to nearest 4K */
+ rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
+ rx_ring->size = ALIGN(rx_ring->size, 4096);
+
+ rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
+ &rx_ring->dma, GFP_KERNEL);
+
+ if (!rx_ring->desc) {
+ hw_dbg(&adapter->hw,
+ "Unable to allocate memory for "
+ "the receive descriptor ring\n");
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+ goto alloc_failed;
+ }
+
+ rx_ring->next_to_clean = 0;
+ rx_ring->next_to_use = 0;
+
+ return 0;
+alloc_failed:
+ return -ENOMEM;
+}
+
+/**
+ * ixgbevf_setup_all_rx_resources - allocate all queues Rx resources
+ * @adapter: board private structure
+ *
+ * If this function returns with an error, then it's possible one or
+ * more of the rings is populated (while the rest are not). It is the
+ * callers duty to clean those orphaned rings.
+ *
+ * Return 0 on success, negative on failure
+ **/
+static int ixgbevf_setup_all_rx_resources(struct ixgbevf_adapter *adapter)
+{
+ int i, err = 0;
+
+ for (i = 0; i < adapter->num_rx_queues; i++) {
+ err = ixgbevf_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+ if (!err)
+ continue;
+ hw_dbg(&adapter->hw,
+ "Allocation for Rx Queue %u failed\n", i);
+ break;
+ }
+ return err;
+}
+
+/**
+ * ixgbevf_free_rx_resources - Free Rx Resources
+ * @adapter: board private structure
+ * @rx_ring: ring to clean the resources from
+ *
+ * Free all receive software resources
+ **/
+void ixgbevf_free_rx_resources(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *rx_ring)
+{
+ struct pci_dev *pdev = adapter->pdev;
+
+ ixgbevf_clean_rx_ring(adapter, rx_ring);
+
+ vfree(rx_ring->rx_buffer_info);
+ rx_ring->rx_buffer_info = NULL;
+
+ dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
+ rx_ring->dma);
+
+ rx_ring->desc = NULL;
+}
+
+/**
+ * ixgbevf_free_all_rx_resources - Free Rx Resources for All Queues
+ * @adapter: board private structure
+ *
+ * Free all receive software resources
+ **/
+static void ixgbevf_free_all_rx_resources(struct ixgbevf_adapter *adapter)
+{
+ int i;
+
+ for (i = 0; i < adapter->num_rx_queues; i++)
+ if (adapter->rx_ring[i].desc)
+ ixgbevf_free_rx_resources(adapter,
+ &adapter->rx_ring[i]);
+}
+
+/**
+ * ixgbevf_open - Called when a network interface is made active
+ * @netdev: network interface device structure
+ *
+ * Returns 0 on success, negative value on failure
+ *
+ * The open entry point is called when a network interface is made
+ * active by the system (IFF_UP). At this point all resources needed
+ * for transmit and receive operations are allocated, the interrupt
+ * handler is registered with the OS, the watchdog timer is started,
+ * and the stack is notified that the interface is ready.
+ **/
+static int ixgbevf_open(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int err;
+
+ /* disallow open during test */
+ if (test_bit(__IXGBEVF_TESTING, &adapter->state))
+ return -EBUSY;
+
+ if (hw->adapter_stopped) {
+ ixgbevf_reset(adapter);
+ /* if adapter is still stopped then PF isn't up and
+ * the vf can't start. */
+ if (hw->adapter_stopped) {
+ err = IXGBE_ERR_MBX;
+ printk(KERN_ERR "Unable to start - perhaps the PF"
+ " Driver isn't up yet\n");
+ goto err_setup_reset;
+ }
+ }
+
+ /* allocate transmit descriptors */
+ err = ixgbevf_setup_all_tx_resources(adapter);
+ if (err)
+ goto err_setup_tx;
+
+ /* allocate receive descriptors */
+ err = ixgbevf_setup_all_rx_resources(adapter);
+ if (err)
+ goto err_setup_rx;
+
+ ixgbevf_configure(adapter);
+
+ /*
+ * Map the Tx/Rx rings to the vectors we were allotted.
+ * if request_irq will be called in this function map_rings
+ * must be called *before* up_complete
+ */
+ ixgbevf_map_rings_to_vectors(adapter);
+
+ err = ixgbevf_up_complete(adapter);
+ if (err)
+ goto err_up;
+
+ /* clear any pending interrupts, may auto mask */
+ IXGBE_READ_REG(hw, IXGBE_VTEICR);
+ err = ixgbevf_request_irq(adapter);
+ if (err)
+ goto err_req_irq;
+
+ ixgbevf_irq_enable(adapter, true, true);
+
+ return 0;
+
+err_req_irq:
+ ixgbevf_down(adapter);
+err_up:
+ ixgbevf_free_irq(adapter);
+err_setup_rx:
+ ixgbevf_free_all_rx_resources(adapter);
+err_setup_tx:
+ ixgbevf_free_all_tx_resources(adapter);
+ ixgbevf_reset(adapter);
+
+err_setup_reset:
+
+ return err;
+}
+
+/**
+ * ixgbevf_close - Disables a network interface
+ * @netdev: network interface device structure
+ *
+ * Returns 0, this is not allowed to fail
+ *
+ * The close entry point is called when an interface is de-activated
+ * by the OS. The hardware is still under the drivers control, but
+ * needs to be disabled. A global MAC reset is issued to stop the
+ * hardware, and all transmit and receive resources are freed.
+ **/
+static int ixgbevf_close(struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ ixgbevf_down(adapter);
+ ixgbevf_free_irq(adapter);
+
+ ixgbevf_free_all_tx_resources(adapter);
+ ixgbevf_free_all_rx_resources(adapter);
+
+ return 0;
+}
+
+static int ixgbevf_tso(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
+{
+ struct ixgbe_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ int err;
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ u32 vlan_macip_lens = 0, type_tucmd_mlhl;
+ u32 mss_l4len_idx, l4len;
+
+ if (skb_is_gso(skb)) {
+ if (skb_header_cloned(skb)) {
+ err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
+ if (err)
+ return err;
+ }
+ l4len = tcp_hdrlen(skb);
+ *hdr_len += l4len;
+
+ if (skb->protocol == htons(ETH_P_IP)) {
+ struct iphdr *iph = ip_hdr(skb);
+ iph->tot_len = 0;
+ iph->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
+ iph->daddr, 0,
+ IPPROTO_TCP,
+ 0);
+ adapter->hw_tso_ctxt++;
+ } else if (skb_is_gso_v6(skb)) {
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check =
+ ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr,
+ 0, IPPROTO_TCP, 0);
+ adapter->hw_tso6_ctxt++;
+ }
+
+ i = tx_ring->next_to_use;
+
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ /* VLAN MACLEN IPLEN */
+ if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+ vlan_macip_lens |=
+ (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
+ vlan_macip_lens |= ((skb_network_offset(skb)) <<
+ IXGBE_ADVTXD_MACLEN_SHIFT);
+ *hdr_len += skb_network_offset(skb);
+ vlan_macip_lens |=
+ (skb_transport_header(skb) - skb_network_header(skb));
+ *hdr_len +=
+ (skb_transport_header(skb) - skb_network_header(skb));
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = 0;
+
+ /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
+ type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
+ IXGBE_ADVTXD_DTYP_CTXT);
+
+ if (skb->protocol == htons(ETH_P_IP))
+ type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+ type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
+
+ /* MSS L4LEN IDX */
+ mss_l4len_idx =
+ (skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT);
+ mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT);
+ /* use index 1 for TSO */
+ mss_l4len_idx |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+ context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
+
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags)
+{
+ struct ixgbe_adv_tx_context_desc *context_desc;
+ unsigned int i;
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL ||
+ (tx_flags & IXGBE_TX_FLAGS_VLAN)) {
+ i = tx_ring->next_to_use;
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
+
+ if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+ vlan_macip_lens |= (tx_flags &
+ IXGBE_TX_FLAGS_VLAN_MASK);
+ vlan_macip_lens |= (skb_network_offset(skb) <<
+ IXGBE_ADVTXD_MACLEN_SHIFT);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ vlan_macip_lens |= (skb_transport_header(skb) -
+ skb_network_header(skb));
+
+ context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
+ context_desc->seqnum_seed = 0;
+
+ type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT |
+ IXGBE_ADVTXD_DTYP_CTXT);
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ switch (skb->protocol) {
+ case __constant_htons(ETH_P_IP):
+ type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+ if (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ case __constant_htons(ETH_P_IPV6):
+ /* XXX what about other V6 headers?? */
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ break;
+ default:
+ if (unlikely(net_ratelimit())) {
+ printk(KERN_WARNING
+ "partial checksum but "
+ "proto=%x!\n",
+ skb->protocol);
+ }
+ break;
+ }
+ }
+
+ context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
+ /* use index zero for tx checksum offload */
+ context_desc->mss_l4len_idx = 0;
+
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ adapter->hw_csum_tx_good++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ tx_ring->next_to_use = i;
+
+ return true;
+ }
+
+ return false;
+}
+
+static int ixgbevf_tx_map(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring,
+ struct sk_buff *skb, u32 tx_flags,
+ unsigned int first)
+{
+ struct pci_dev *pdev = adapter->pdev;
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ unsigned int len;
+ unsigned int total = skb->len;
+ unsigned int offset = 0, size;
+ int count = 0;
+ unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
+ unsigned int f;
+ int i;
+
+ i = tx_ring->next_to_use;
+
+ len = min(skb_headlen(skb), total);
+ while (len) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
+
+ tx_buffer_info->length = size;
+ tx_buffer_info->mapped_as_page = false;
+ tx_buffer_info->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data + offset,
+ size, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
+ goto dma_error;
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ len -= size;
+ total -= size;
+ offset += size;
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ for (f = 0; f < nr_frags; f++) {
+ struct skb_frag_struct *frag;
+
+ frag = &skb_shinfo(skb)->frags[f];
+ len = min((unsigned int)frag->size, total);
+ offset = frag->page_offset;
+
+ while (len) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
+
+ tx_buffer_info->length = size;
+ tx_buffer_info->dma = dma_map_page(&adapter->pdev->dev,
+ frag->page,
+ offset,
+ size,
+ DMA_TO_DEVICE);
+ tx_buffer_info->mapped_as_page = true;
+ if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
+ goto dma_error;
+ tx_buffer_info->time_stamp = jiffies;
+ tx_buffer_info->next_to_watch = i;
+
+ len -= size;
+ total -= size;
+ offset += size;
+ count++;
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+ if (total == 0)
+ break;
+ }
+
+ if (i == 0)
+ i = tx_ring->count - 1;
+ else
+ i = i - 1;
+ tx_ring->tx_buffer_info[i].skb = skb;
+ tx_ring->tx_buffer_info[first].next_to_watch = i;
+
+ return count;
+
+dma_error:
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+
+ /* clear timestamp and dma mappings for failed tx_buffer_info map */
+ tx_buffer_info->dma = 0;
+ tx_buffer_info->time_stamp = 0;
+ tx_buffer_info->next_to_watch = 0;
+ count--;
+
+ /* clear timestamp and dma mappings for remaining portion of packet */
+ while (count >= 0) {
+ count--;
+ i--;
+ if (i < 0)
+ i += tx_ring->count;
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
+ }
+
+ return count;
+}
+
+static void ixgbevf_tx_queue(struct ixgbevf_adapter *adapter,
+ struct ixgbevf_ring *tx_ring, int tx_flags,
+ int count, u32 paylen, u8 hdr_len)
+{
+ union ixgbe_adv_tx_desc *tx_desc = NULL;
+ struct ixgbevf_tx_buffer *tx_buffer_info;
+ u32 olinfo_status = 0, cmd_type_len = 0;
+ unsigned int i;
+
+ u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
+
+ cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
+
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
+
+ if (tx_flags & IXGBE_TX_FLAGS_VLAN)
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
+
+ if (tx_flags & IXGBE_TX_FLAGS_TSO) {
+ cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+
+ olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ /* use index 1 context for tso */
+ olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
+ if (tx_flags & IXGBE_TX_FLAGS_IPV4)
+ olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ } else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
+ olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
+ IXGBE_ADVTXD_POPTS_SHIFT;
+
+ olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
+
+ i = tx_ring->next_to_use;
+ while (count--) {
+ tx_buffer_info = &tx_ring->tx_buffer_info[i];
+ tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
+ tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
+ tx_desc->read.cmd_type_len =
+ cpu_to_le32(cmd_type_len | tx_buffer_info->length);
+ tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
+
+ tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
+
+ /*
+ * Force memory writes to complete before letting h/w
+ * know there are new descriptors to fetch. (Only
+ * applicable for weak-ordered memory model archs,
+ * such as IA-64).
+ */
+ wmb();
+
+ tx_ring->next_to_use = i;
+ writel(i, adapter->hw.hw_addr + tx_ring->tail);
+}
+
+static int __ixgbevf_maybe_stop_tx(struct net_device *netdev,
+ struct ixgbevf_ring *tx_ring, int size)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ netif_stop_subqueue(netdev, tx_ring->queue_index);
+ /* Herbert's original patch had:
+ * smp_mb__after_netif_stop_queue();
+ * but since that doesn't exist yet, just open code it. */
+ smp_mb();
+
+ /* We need to check again in a case another CPU has just
+ * made room available. */
+ if (likely(IXGBE_DESC_UNUSED(tx_ring) < size))
+ return -EBUSY;
+
+ /* A reprieve! - use start_queue because it doesn't call schedule */
+ netif_start_subqueue(netdev, tx_ring->queue_index);
+ ++adapter->restart_queue;
+ return 0;
+}
+
+static int ixgbevf_maybe_stop_tx(struct net_device *netdev,
+ struct ixgbevf_ring *tx_ring, int size)
+{
+ if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
+ return 0;
+ return __ixgbevf_maybe_stop_tx(netdev, tx_ring, size);
+}
+
+static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbevf_ring *tx_ring;
+ unsigned int first;
+ unsigned int tx_flags = 0;
+ u8 hdr_len = 0;
+ int r_idx = 0, tso;
+ int count = 0;
+
+ unsigned int f;
+
+ tx_ring = &adapter->tx_ring[r_idx];
+
+ if (vlan_tx_tag_present(skb)) {
+ tx_flags |= vlan_tx_tag_get(skb);
+ tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+ tx_flags |= IXGBE_TX_FLAGS_VLAN;
+ }
+
+ /* four things can cause us to need a context descriptor */
+ if (skb_is_gso(skb) ||
+ (skb->ip_summed == CHECKSUM_PARTIAL) ||
+ (tx_flags & IXGBE_TX_FLAGS_VLAN))
+ count++;
+
+ count += TXD_USE_COUNT(skb_headlen(skb));
+ for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
+ count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
+
+ if (ixgbevf_maybe_stop_tx(netdev, tx_ring, count)) {
+ adapter->tx_busy++;
+ return NETDEV_TX_BUSY;
+ }
+
+ first = tx_ring->next_to_use;
+
+ if (skb->protocol == htons(ETH_P_IP))
+ tx_flags |= IXGBE_TX_FLAGS_IPV4;
+ tso = ixgbevf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
+ if (tso < 0) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ if (tso)
+ tx_flags |= IXGBE_TX_FLAGS_TSO;
+ else if (ixgbevf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
+ (skb->ip_summed == CHECKSUM_PARTIAL))
+ tx_flags |= IXGBE_TX_FLAGS_CSUM;
+
+ ixgbevf_tx_queue(adapter, tx_ring, tx_flags,
+ ixgbevf_tx_map(adapter, tx_ring, skb, tx_flags, first),
+ skb->len, hdr_len);
+
+ ixgbevf_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * ixgbevf_set_mac - Change the Ethernet Address of the NIC
+ * @netdev: network interface device structure
+ * @p: pointer to an address structure
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbevf_set_mac(struct net_device *netdev, void *p)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
+
+ if (hw->mac.ops.set_rar)
+ hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
+
+ return 0;
+}
+
+/**
+ * ixgbevf_change_mtu - Change the Maximum Transfer Unit
+ * @netdev: network interface device structure
+ * @new_mtu: new value for maximum frame size
+ *
+ * Returns 0 on success, negative on failure
+ **/
+static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+ struct ixgbe_hw *hw = &adapter->hw;
+ int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+ int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE;
+ u32 msg[2];
+
+ if (adapter->hw.mac.type == ixgbe_mac_X540_vf)
+ max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
+
+ /* MTU < 68 is an error and causes problems on some kernels */
+ if ((new_mtu < 68) || (max_frame > max_possible_frame))
+ return -EINVAL;
+
+ hw_dbg(&adapter->hw, "changing MTU from %d to %d\n",
+ netdev->mtu, new_mtu);
+ /* must set new MTU before calling down or up */
+ netdev->mtu = new_mtu;
+
+ msg[0] = IXGBE_VF_SET_LPE;
+ msg[1] = max_frame;
+ hw->mbx.ops.write_posted(hw, msg, 2);
+
+ if (netif_running(netdev))
+ ixgbevf_reinit_locked(adapter);
+
+ return 0;
+}
+
+static void ixgbevf_shutdown(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ netif_device_detach(netdev);
+
+ if (netif_running(netdev)) {
+ ixgbevf_down(adapter);
+ ixgbevf_free_irq(adapter);
+ ixgbevf_free_all_tx_resources(adapter);
+ ixgbevf_free_all_rx_resources(adapter);
+ }
+
+#ifdef CONFIG_PM
+ pci_save_state(pdev);
+#endif
+
+ pci_disable_device(pdev);
+}
+
+static const struct net_device_ops ixgbe_netdev_ops = {
+ .ndo_open = ixgbevf_open,
+ .ndo_stop = ixgbevf_close,
+ .ndo_start_xmit = ixgbevf_xmit_frame,
+ .ndo_set_rx_mode = ixgbevf_set_rx_mode,
+ .ndo_set_multicast_list = ixgbevf_set_rx_mode,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = ixgbevf_set_mac,
+ .ndo_change_mtu = ixgbevf_change_mtu,
+ .ndo_tx_timeout = ixgbevf_tx_timeout,
+ .ndo_vlan_rx_add_vid = ixgbevf_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = ixgbevf_vlan_rx_kill_vid,
+};
+
+static void ixgbevf_assign_netdev_ops(struct net_device *dev)
+{
+ dev->netdev_ops = &ixgbe_netdev_ops;
+ ixgbevf_set_ethtool_ops(dev);
+ dev->watchdog_timeo = 5 * HZ;
+}
+
+/**
+ * ixgbevf_probe - Device Initialization Routine
+ * @pdev: PCI device information struct
+ * @ent: entry in ixgbevf_pci_tbl
+ *
+ * Returns 0 on success, negative on failure
+ *
+ * ixgbevf_probe initializes an adapter identified by a pci_dev structure.
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur.
+ **/
+static int __devinit ixgbevf_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct net_device *netdev;
+ struct ixgbevf_adapter *adapter = NULL;
+ struct ixgbe_hw *hw = NULL;
+ const struct ixgbevf_info *ii = ixgbevf_info_tbl[ent->driver_data];
+ static int cards_found;
+ int err, pci_using_dac;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
+ !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
+ pci_using_dac = 1;
+ } else {
+ err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (err) {
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
+ if (err) {
+ dev_err(&pdev->dev, "No usable DMA "
+ "configuration, aborting\n");
+ goto err_dma;
+ }
+ }
+ pci_using_dac = 0;
+ }
+
+ err = pci_request_regions(pdev, ixgbevf_driver_name);
+ if (err) {
+ dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err);
+ goto err_pci_reg;
+ }
+
+ pci_set_master(pdev);
+
+#ifdef HAVE_TX_MQ
+ netdev = alloc_etherdev_mq(sizeof(struct ixgbevf_adapter),
+ MAX_TX_QUEUES);
+#else
+ netdev = alloc_etherdev(sizeof(struct ixgbevf_adapter));
+#endif
+ if (!netdev) {
+ err = -ENOMEM;
+ goto err_alloc_etherdev;
+ }
+
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ pci_set_drvdata(pdev, netdev);
+ adapter = netdev_priv(netdev);
+
+ adapter->netdev = netdev;
+ adapter->pdev = pdev;
+ hw = &adapter->hw;
+ hw->back = adapter;
+ adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
+
+ /*
+ * call save state here in standalone driver because it relies on
+ * adapter struct to exist, and needs to call netdev_priv
+ */
+ pci_save_state(pdev);
+
+ hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
+ pci_resource_len(pdev, 0));
+ if (!hw->hw_addr) {
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ ixgbevf_assign_netdev_ops(netdev);
+
+ adapter->bd_number = cards_found;
+
+ /* Setup hw api */
+ memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
+ hw->mac.type = ii->mac;
+
+ memcpy(&hw->mbx.ops, &ixgbevf_mbx_ops,
+ sizeof(struct ixgbe_mbx_operations));
+
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_CAPABLE;
+ adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
+ adapter->flags |= IXGBE_FLAG_RX_1BUF_CAPABLE;
+
+ /* setup the private structure */
+ err = ixgbevf_sw_init(adapter);
+
+ netdev->features = NETIF_F_SG |
+ NETIF_F_IP_CSUM |
+ NETIF_F_HW_VLAN_TX |
+ NETIF_F_HW_VLAN_RX |
+ NETIF_F_HW_VLAN_FILTER;
+
+ netdev->features |= NETIF_F_IPV6_CSUM;
+ netdev->features |= NETIF_F_TSO;
+ netdev->features |= NETIF_F_TSO6;
+ netdev->features |= NETIF_F_GRO;
+ netdev->vlan_features |= NETIF_F_TSO;
+ netdev->vlan_features |= NETIF_F_TSO6;
+ netdev->vlan_features |= NETIF_F_IP_CSUM;
+ netdev->vlan_features |= NETIF_F_IPV6_CSUM;
+ netdev->vlan_features |= NETIF_F_SG;
+
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ /* The HW MAC address was set and/or determined in sw_init */
+ memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
+ memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
+
+ if (!is_valid_ether_addr(netdev->dev_addr)) {
+ printk(KERN_ERR "invalid MAC address\n");
+ err = -EIO;
+ goto err_sw_init;
+ }
+
+ init_timer(&adapter->watchdog_timer);
+ adapter->watchdog_timer.function = ixgbevf_watchdog;
+ adapter->watchdog_timer.data = (unsigned long)adapter;
+
+ INIT_WORK(&adapter->reset_task, ixgbevf_reset_task);
+ INIT_WORK(&adapter->watchdog_task, ixgbevf_watchdog_task);
+
+ err = ixgbevf_init_interrupt_scheme(adapter);
+ if (err)
+ goto err_sw_init;
+
+ /* pick up the PCI bus settings for reporting later */
+ if (hw->mac.ops.get_bus_info)
+ hw->mac.ops.get_bus_info(hw);
+
+ strcpy(netdev->name, "eth%d");
+
+ err = register_netdev(netdev);
+ if (err)
+ goto err_register;
+
+ adapter->netdev_registered = true;
+
+ netif_carrier_off(netdev);
+
+ ixgbevf_init_last_counter_stats(adapter);
+
+ /* print the MAC address */
+ hw_dbg(hw, "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+ netdev->dev_addr[0],
+ netdev->dev_addr[1],
+ netdev->dev_addr[2],
+ netdev->dev_addr[3],
+ netdev->dev_addr[4],
+ netdev->dev_addr[5]);
+
+ hw_dbg(hw, "MAC: %d\n", hw->mac.type);
+
+ hw_dbg(hw, "LRO is disabled\n");
+
+ hw_dbg(hw, "Intel(R) 82599 Virtual Function\n");
+ cards_found++;
+ return 0;
+
+err_register:
+err_sw_init:
+ ixgbevf_reset_interrupt_capability(adapter);
+ iounmap(hw->hw_addr);
+err_ioremap:
+ free_netdev(netdev);
+err_alloc_etherdev:
+ pci_release_regions(pdev);
+err_pci_reg:
+err_dma:
+ pci_disable_device(pdev);
+ return err;
+}
+
+/**
+ * ixgbevf_remove - Device Removal Routine
+ * @pdev: PCI device information struct
+ *
+ * ixgbevf_remove is called by the PCI subsystem to alert the driver
+ * that it should release a PCI device. The could be caused by a
+ * Hot-Plug event, or because the driver is going to be removed from
+ * memory.
+ **/
+static void __devexit ixgbevf_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct ixgbevf_adapter *adapter = netdev_priv(netdev);
+
+ set_bit(__IXGBEVF_DOWN, &adapter->state);
+
+ del_timer_sync(&adapter->watchdog_timer);
+
+ cancel_work_sync(&adapter->reset_task);
+ cancel_work_sync(&adapter->watchdog_task);
+
+ if (adapter->netdev_registered) {
+ unregister_netdev(netdev);
+ adapter->netdev_registered = false;
+ }
+
+ ixgbevf_reset_interrupt_capability(adapter);
+
+ iounmap(adapter->hw.hw_addr);
+ pci_release_regions(pdev);
+
+ hw_dbg(&adapter->hw, "Remove complete\n");
+
+ kfree(adapter->tx_ring);
+ kfree(adapter->rx_ring);
+
+ free_netdev(netdev);
+
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver ixgbevf_driver = {
+ .name = ixgbevf_driver_name,
+ .id_table = ixgbevf_pci_tbl,
+ .probe = ixgbevf_probe,
+ .remove = __devexit_p(ixgbevf_remove),
+ .shutdown = ixgbevf_shutdown,
+};
+
+/**
+ * ixgbevf_init_module - Driver Registration Routine
+ *
+ * ixgbevf_init_module is the first routine called when the driver is
+ * loaded. All it does is register with the PCI subsystem.
+ **/
+static int __init ixgbevf_init_module(void)
+{
+ int ret;
+ printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
+ ixgbevf_driver_version);
+
+ printk(KERN_INFO "%s\n", ixgbevf_copyright);
+
+ ret = pci_register_driver(&ixgbevf_driver);
+ return ret;
+}
+
+module_init(ixgbevf_init_module);
+
+/**
+ * ixgbevf_exit_module - Driver Exit Cleanup Routine
+ *
+ * ixgbevf_exit_module is called just before the driver is removed
+ * from memory.
+ **/
+static void __exit ixgbevf_exit_module(void)
+{
+ pci_unregister_driver(&ixgbevf_driver);
+}
+
+#ifdef DEBUG
+/**
+ * ixgbevf_get_hw_dev_name - return device name string
+ * used by hardware layer to print debugging information
+ **/
+char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw)
+{
+ struct ixgbevf_adapter *adapter = hw->back;
+ return adapter->netdev->name;
+}
+
+#endif
+module_exit(ixgbevf_exit_module);
+
+/* ixgbevf_main.c */
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "mbx.h"
+
+/**
+ * ixgbevf_poll_for_msg - Wait for message notification
+ * @hw: pointer to the HW structure
+ *
+ * returns 0 if it successfully received a message notification
+ **/
+static s32 ixgbevf_poll_for_msg(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ while (countdown && mbx->ops.check_for_msg(hw)) {
+ countdown--;
+ udelay(mbx->udelay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+
+ return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbevf_poll_for_ack - Wait for message acknowledgement
+ * @hw: pointer to the HW structure
+ *
+ * returns 0 if it successfully received a message acknowledgement
+ **/
+static s32 ixgbevf_poll_for_ack(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ int countdown = mbx->timeout;
+
+ while (countdown && mbx->ops.check_for_ack(hw)) {
+ countdown--;
+ udelay(mbx->udelay);
+ }
+
+ /* if we failed, all future posted messages fail until reset */
+ if (!countdown)
+ mbx->timeout = 0;
+
+ return countdown ? 0 : IXGBE_ERR_MBX;
+}
+
+/**
+ * ixgbevf_read_posted_mbx - Wait for message notification and receive message
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns 0 if it successfully received a message notification and
+ * copied it into the receive buffer.
+ **/
+static s32 ixgbevf_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ ret_val = ixgbevf_poll_for_msg(hw);
+
+ /* if ack received read message, otherwise we timed out */
+ if (!ret_val)
+ ret_val = mbx->ops.read(hw, msg, size);
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_write_posted_mbx - Write a message to the mailbox, wait for ack
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns 0 if it successfully copied message into the buffer and
+ * received an ack to that message within delay * timeout period
+ **/
+static s32 ixgbevf_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ s32 ret_val;
+
+ /* send msg */
+ ret_val = mbx->ops.write(hw, msg, size);
+
+ /* if msg sent wait until we receive an ack */
+ if (!ret_val)
+ ret_val = ixgbevf_poll_for_ack(hw);
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_read_v2p_mailbox - read v2p mailbox
+ * @hw: pointer to the HW structure
+ *
+ * This function is used to read the v2p mailbox without losing the read to
+ * clear status bits.
+ **/
+static u32 ixgbevf_read_v2p_mailbox(struct ixgbe_hw *hw)
+{
+ u32 v2p_mailbox = IXGBE_READ_REG(hw, IXGBE_VFMAILBOX);
+
+ v2p_mailbox |= hw->mbx.v2p_mailbox;
+ hw->mbx.v2p_mailbox |= v2p_mailbox & IXGBE_VFMAILBOX_R2C_BITS;
+
+ return v2p_mailbox;
+}
+
+/**
+ * ixgbevf_check_for_bit_vf - Determine if a status bit was set
+ * @hw: pointer to the HW structure
+ * @mask: bitmask for bits to be tested and cleared
+ *
+ * This function is used to check for the read to clear bits within
+ * the V2P mailbox.
+ **/
+static s32 ixgbevf_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
+{
+ u32 v2p_mailbox = ixgbevf_read_v2p_mailbox(hw);
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (v2p_mailbox & mask)
+ ret_val = 0;
+
+ hw->mbx.v2p_mailbox &= ~mask;
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_check_for_msg_vf - checks to see if the PF has sent mail
+ * @hw: pointer to the HW structure
+ *
+ * returns 0 if the PF has set the Status bit or else ERR_MBX
+ **/
+static s32 ixgbevf_check_for_msg_vf(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFSTS)) {
+ ret_val = 0;
+ hw->mbx.stats.reqs++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_check_for_ack_vf - checks to see if the PF has ACK'd
+ * @hw: pointer to the HW structure
+ *
+ * returns 0 if the PF has set the ACK bit or else ERR_MBX
+ **/
+static s32 ixgbevf_check_for_ack_vf(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFACK)) {
+ ret_val = 0;
+ hw->mbx.stats.acks++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_check_for_rst_vf - checks to see if the PF has reset
+ * @hw: pointer to the HW structure
+ *
+ * returns true if the PF has set the reset done bit or else false
+ **/
+static s32 ixgbevf_check_for_rst_vf(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ if (!ixgbevf_check_for_bit_vf(hw, (IXGBE_VFMAILBOX_RSTD |
+ IXGBE_VFMAILBOX_RSTI))) {
+ ret_val = 0;
+ hw->mbx.stats.rsts++;
+ }
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_obtain_mbx_lock_vf - obtain mailbox lock
+ * @hw: pointer to the HW structure
+ *
+ * return 0 if we obtained the mailbox lock
+ **/
+static s32 ixgbevf_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
+{
+ s32 ret_val = IXGBE_ERR_MBX;
+
+ /* Take ownership of the buffer */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_VFU);
+
+ /* reserve mailbox for vf use */
+ if (ixgbevf_read_v2p_mailbox(hw) & IXGBE_VFMAILBOX_VFU)
+ ret_val = 0;
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_write_mbx_vf - Write a message to the mailbox
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns 0 if it successfully copied message into the buffer
+ **/
+static s32 ixgbevf_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+ s32 ret_val;
+ u16 i;
+
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_write;
+
+ /* flush msg and acks as we are overwriting the message buffer */
+ ixgbevf_check_for_msg_vf(hw);
+ ixgbevf_check_for_ack_vf(hw);
+
+ /* copy the caller specified message to the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, msg[i]);
+
+ /* update stats */
+ hw->mbx.stats.msgs_tx++;
+
+ /* Drop VFU and interrupt the PF to tell it a message has been sent */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_REQ);
+
+out_no_write:
+ return ret_val;
+}
+
+/**
+ * ixgbevf_read_mbx_vf - Reads a message from the inbox intended for vf
+ * @hw: pointer to the HW structure
+ * @msg: The message buffer
+ * @size: Length of buffer
+ *
+ * returns 0 if it successfuly read message from buffer
+ **/
+static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
+{
+ s32 ret_val = 0;
+ u16 i;
+
+ /* lock the mailbox to prevent pf/vf race condition */
+ ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
+ if (ret_val)
+ goto out_no_read;
+
+ /* copy the message from the mailbox memory buffer */
+ for (i = 0; i < size; i++)
+ msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_VFMBMEM, i);
+
+ /* Acknowledge receipt and release mailbox, then we're done */
+ IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_ACK);
+
+ /* update stats */
+ hw->mbx.stats.msgs_rx++;
+
+out_no_read:
+ return ret_val;
+}
+
+/**
+ * ixgbevf_init_mbx_params_vf - set initial values for vf mailbox
+ * @hw: pointer to the HW structure
+ *
+ * Initializes the hw->mbx struct to correct values for vf mailbox
+ */
+static s32 ixgbevf_init_mbx_params_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+
+ /* start mailbox as timed out and let the reset_hw call set the timeout
+ * value to begin communications */
+ mbx->timeout = 0;
+ mbx->udelay = IXGBE_VF_MBX_INIT_DELAY;
+
+ mbx->size = IXGBE_VFMAILBOX_SIZE;
+
+ mbx->stats.msgs_tx = 0;
+ mbx->stats.msgs_rx = 0;
+ mbx->stats.reqs = 0;
+ mbx->stats.acks = 0;
+ mbx->stats.rsts = 0;
+
+ return 0;
+}
+
+struct ixgbe_mbx_operations ixgbevf_mbx_ops = {
+ .init_params = ixgbevf_init_mbx_params_vf,
+ .read = ixgbevf_read_mbx_vf,
+ .write = ixgbevf_write_mbx_vf,
+ .read_posted = ixgbevf_read_posted_mbx,
+ .write_posted = ixgbevf_write_posted_mbx,
+ .check_for_msg = ixgbevf_check_for_msg_vf,
+ .check_for_ack = ixgbevf_check_for_ack_vf,
+ .check_for_rst = ixgbevf_check_for_rst_vf,
+};
+
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBE_MBX_H_
+#define _IXGBE_MBX_H_
+
+#include "vf.h"
+
+#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
+#define IXGBE_ERR_MBX -100
+
+#define IXGBE_VFMAILBOX 0x002FC
+#define IXGBE_VFMBMEM 0x00200
+
+/* Define mailbox register bits */
+#define IXGBE_VFMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
+#define IXGBE_VFMAILBOX_ACK 0x00000002 /* Ack PF message received */
+#define IXGBE_VFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_VFMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
+#define IXGBE_VFMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
+#define IXGBE_VFMAILBOX_RSTI 0x00000040 /* PF has reset indication */
+#define IXGBE_VFMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
+#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
+
+#define IXGBE_PFMAILBOX(x) (0x04B00 + (4 * x))
+#define IXGBE_PFMBMEM(vfn) (0x13000 + (64 * vfn))
+
+#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
+#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
+#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
+#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
+
+#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
+#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
+#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
+#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
+
+
+/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
+ * PF. The reverse is true if it is IXGBE_PF_*.
+ * Message ACK's are the value or'd with 0xF0000000
+ */
+#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
+ * this are the ACK */
+#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
+ * this are the NACK */
+#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
+ * clear to send requests */
+#define IXGBE_VT_MSGINFO_SHIFT 16
+/* bits 23:16 are used for exra info for certain messages */
+#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
+
+#define IXGBE_VF_RESET 0x01 /* VF requests reset */
+#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
+#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
+#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
+#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
+#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
+
+/* length of permanent address message returned from PF */
+#define IXGBE_VF_PERMADDR_MSG_LEN 4
+/* word in permanent address message with the current multicast type */
+#define IXGBE_VF_MC_TYPE_WORD 3
+
+#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */
+
+#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
+#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
+
+/* forward declaration of the HW struct */
+struct ixgbe_hw;
+
+#endif /* _IXGBE_MBX_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef _IXGBEVF_REGS_H_
+#define _IXGBEVF_REGS_H_
+
+#define IXGBE_VFCTRL 0x00000
+#define IXGBE_VFSTATUS 0x00008
+#define IXGBE_VFLINKS 0x00010
+#define IXGBE_VFFRTIMER 0x00048
+#define IXGBE_VFRXMEMWRAP 0x03190
+#define IXGBE_VTEICR 0x00100
+#define IXGBE_VTEICS 0x00104
+#define IXGBE_VTEIMS 0x00108
+#define IXGBE_VTEIMC 0x0010C
+#define IXGBE_VTEIAC 0x00110
+#define IXGBE_VTEIAM 0x00114
+#define IXGBE_VTEITR(x) (0x00820 + (4 * x))
+#define IXGBE_VTIVAR(x) (0x00120 + (4 * x))
+#define IXGBE_VTIVAR_MISC 0x00140
+#define IXGBE_VTRSCINT(x) (0x00180 + (4 * x))
+#define IXGBE_VFRDBAL(x) (0x01000 + (0x40 * x))
+#define IXGBE_VFRDBAH(x) (0x01004 + (0x40 * x))
+#define IXGBE_VFRDLEN(x) (0x01008 + (0x40 * x))
+#define IXGBE_VFRDH(x) (0x01010 + (0x40 * x))
+#define IXGBE_VFRDT(x) (0x01018 + (0x40 * x))
+#define IXGBE_VFRXDCTL(x) (0x01028 + (0x40 * x))
+#define IXGBE_VFSRRCTL(x) (0x01014 + (0x40 * x))
+#define IXGBE_VFRSCCTL(x) (0x0102C + (0x40 * x))
+#define IXGBE_VFPSRTYPE 0x00300
+#define IXGBE_VFTDBAL(x) (0x02000 + (0x40 * x))
+#define IXGBE_VFTDBAH(x) (0x02004 + (0x40 * x))
+#define IXGBE_VFTDLEN(x) (0x02008 + (0x40 * x))
+#define IXGBE_VFTDH(x) (0x02010 + (0x40 * x))
+#define IXGBE_VFTDT(x) (0x02018 + (0x40 * x))
+#define IXGBE_VFTXDCTL(x) (0x02028 + (0x40 * x))
+#define IXGBE_VFTDWBAL(x) (0x02038 + (0x40 * x))
+#define IXGBE_VFTDWBAH(x) (0x0203C + (0x40 * x))
+#define IXGBE_VFDCA_RXCTRL(x) (0x0100C + (0x40 * x))
+#define IXGBE_VFDCA_TXCTRL(x) (0x0200c + (0x40 * x))
+#define IXGBE_VFGPRC 0x0101C
+#define IXGBE_VFGPTC 0x0201C
+#define IXGBE_VFGORC_LSB 0x01020
+#define IXGBE_VFGORC_MSB 0x01024
+#define IXGBE_VFGOTC_LSB 0x02020
+#define IXGBE_VFGOTC_MSB 0x02024
+#define IXGBE_VFMPRC 0x01034
+
+#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
+
+#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
+
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \
+ writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
+
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \
+ readl((a)->hw_addr + (reg) + ((offset) << 2)))
+
+#define IXGBE_WRITE_FLUSH(a) (IXGBE_READ_REG(a, IXGBE_VFSTATUS))
+
+#endif /* _IXGBEVF_REGS_H_ */
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#include "vf.h"
+
+/**
+ * ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
+ * @hw: pointer to hardware structure
+ *
+ * Starts the hardware by filling the bus info structure and media type, clears
+ * all on chip counters, initializes receive address registers, multicast
+ * table, VLAN filter table, calls routine to set up link and flow control
+ * settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
+{
+ /* Clear adapter stopped flag */
+ hw->adapter_stopped = false;
+
+ return 0;
+}
+
+/**
+ * ixgbevf_init_hw_vf - virtual function hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ * Initialize the hardware by resetting the hardware and then starting
+ * the hardware
+ **/
+static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
+{
+ s32 status = hw->mac.ops.start_hw(hw);
+
+ hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
+
+ return status;
+}
+
+/**
+ * ixgbevf_reset_hw_vf - Performs hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * Resets the hardware by reseting the transmit and receive units, masks and
+ * clears all interrupts.
+ **/
+static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 timeout = IXGBE_VF_INIT_TIMEOUT;
+ s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
+ u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
+ u8 *addr = (u8 *)(&msgbuf[1]);
+
+ /* Call adapter stop to disable tx/rx and clear interrupts */
+ hw->mac.ops.stop_adapter(hw);
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* we cannot reset while the RSTI / RSTD bits are asserted */
+ while (!mbx->ops.check_for_rst(hw) && timeout) {
+ timeout--;
+ udelay(5);
+ }
+
+ if (!timeout)
+ return IXGBE_ERR_RESET_FAILED;
+
+ /* mailbox timeout can now become active */
+ mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
+
+ msgbuf[0] = IXGBE_VF_RESET;
+ mbx->ops.write_posted(hw, msgbuf, 1);
+
+ msleep(10);
+
+ /* set our "perm_addr" based on info provided by PF */
+ /* also set up the mc_filter_type which is piggy backed
+ * on the mac address in word 3 */
+ ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
+ if (ret_val)
+ return ret_val;
+
+ if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
+ return IXGBE_ERR_INVALID_MAC_ADDR;
+
+ memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+ hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
+
+ return 0;
+}
+
+/**
+ * ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
+ * @hw: pointer to hardware structure
+ *
+ * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ * disables transmit and receive units. The adapter_stopped flag is used by
+ * the shared code and drivers to determine if the adapter is in a stopped
+ * state and should not touch the hardware.
+ **/
+static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
+{
+ u32 number_of_queues;
+ u32 reg_val;
+ u16 i;
+
+ /*
+ * Set the adapter_stopped flag so other driver functions stop touching
+ * the hardware
+ */
+ hw->adapter_stopped = true;
+
+ /* Disable the receive unit by stopped each queue */
+ number_of_queues = hw->mac.max_rx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
+ if (reg_val & IXGBE_RXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_RXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
+ }
+ }
+
+ IXGBE_WRITE_FLUSH(hw);
+
+ /* Clear interrupt mask to stop from interrupts being generated */
+ IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
+
+ /* Clear any pending interrupts */
+ IXGBE_READ_REG(hw, IXGBE_VTEICR);
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ number_of_queues = hw->mac.max_tx_queues;
+ for (i = 0; i < number_of_queues; i++) {
+ reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
+ if (reg_val & IXGBE_TXDCTL_ENABLE) {
+ reg_val &= ~IXGBE_TXDCTL_ENABLE;
+ IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ixgbevf_mta_vector - Determines bit-vector in multicast table to set
+ * @hw: pointer to hardware structure
+ * @mc_addr: the multicast address
+ *
+ * Extracts the 12 bits, from a multicast address, to determine which
+ * bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ * incoming rx multicast addresses, to determine the bit-vector to check in
+ * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ * by the MO field of the MCSTCTRL. The MO field is set during initialization
+ * to mc_filter_type.
+ **/
+static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+ u32 vector = 0;
+
+ switch (hw->mac.mc_filter_type) {
+ case 0: /* use bits [47:36] of the address */
+ vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+ break;
+ case 1: /* use bits [46:35] of the address */
+ vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+ break;
+ case 2: /* use bits [45:34] of the address */
+ vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+ break;
+ case 3: /* use bits [43:32] of the address */
+ vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+ break;
+ default: /* Invalid mc_filter_type */
+ break;
+ }
+
+ /* vector can only be 12-bits or boundary will be exceeded */
+ vector &= 0xFFF;
+ return vector;
+}
+
+/**
+ * ixgbevf_get_mac_addr_vf - Read device MAC address
+ * @hw: pointer to the HW structure
+ * @mac_addr: pointer to storage for retrieved MAC address
+ **/
+static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+ memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+ return 0;
+}
+
+static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ /*
+ * If index is one then this is the start of a new list and needs
+ * indication to the PF so it can do it's own list management.
+ * If it is zero then that tells the PF to just clear all of
+ * this VF's macvlans and there is no new list.
+ */
+ msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
+ msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
+ if (addr)
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ if (!ret_val)
+ if (msgbuf[0] ==
+ (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
+ ret_val = -ENOMEM;
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_set_rar_vf - set device MAC address
+ * @hw: pointer to hardware structure
+ * @index: Receive address register to write
+ * @addr: Address to put into receive address register
+ * @vmdq: Unused in this implementation
+ **/
+static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
+ u32 vmdq)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[3];
+ u8 *msg_addr = (u8 *)(&msgbuf[1]);
+ s32 ret_val;
+
+ memset(msgbuf, 0, sizeof(msgbuf));
+ msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
+ memcpy(msg_addr, addr, 6);
+ ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
+
+ if (!ret_val)
+ ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
+
+ msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
+
+ /* if nacked the address was rejected, use "perm_addr" */
+ if (!ret_val &&
+ (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
+ ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
+
+ return ret_val;
+}
+
+/**
+ * ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
+ * @hw: pointer to the HW structure
+ * @netdev: pointer to net device structure
+ *
+ * Updates the Multicast Table Array.
+ **/
+static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
+ struct net_device *netdev)
+{
+ struct netdev_hw_addr *ha;
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
+ u16 *vector_list = (u16 *)&msgbuf[1];
+ u32 cnt, i;
+
+ /* Each entry in the list uses 1 16 bit word. We have 30
+ * 16 bit words available in our HW msg buffer (minus 1 for the
+ * msg type). That's 30 hash values if we pack 'em right. If
+ * there are more than 30 MC addresses to add then punt the
+ * extras for now and then add code to handle more than 30 later.
+ * It would be unusual for a server to request that many multi-cast
+ * addresses except for in large enterprise network environments.
+ */
+
+ cnt = netdev_mc_count(netdev);
+ if (cnt > 30)
+ cnt = 30;
+ msgbuf[0] = IXGBE_VF_SET_MULTICAST;
+ msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, netdev) {
+ if (i == cnt)
+ break;
+ vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
+ }
+
+ mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
+
+ return 0;
+}
+
+/**
+ * ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
+ * @hw: pointer to the HW structure
+ * @vlan: 12 bit VLAN ID
+ * @vind: unused by VF drivers
+ * @vlan_on: if true then set bit, else clear bit
+ **/
+static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+ bool vlan_on)
+{
+ struct ixgbe_mbx_info *mbx = &hw->mbx;
+ u32 msgbuf[2];
+
+ msgbuf[0] = IXGBE_VF_SET_VLAN;
+ msgbuf[1] = vlan;
+ /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
+ msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
+
+ return mbx->ops.write_posted(hw, msgbuf, 2);
+}
+
+/**
+ * ixgbevf_setup_mac_link_vf - Setup MAC link settings
+ * @hw: pointer to hardware structure
+ * @speed: Unused in this implementation
+ * @autoneg: Unused in this implementation
+ * @autoneg_wait_to_complete: Unused in this implementation
+ *
+ * Do nothing and return success. VF drivers are not allowed to change
+ * global settings. Maintained for driver compatibility.
+ **/
+static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
+ ixgbe_link_speed speed, bool autoneg,
+ bool autoneg_wait_to_complete)
+{
+ return 0;
+}
+
+/**
+ * ixgbevf_check_mac_link_vf - Get link/speed status
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @link_up: true is link is up, false otherwise
+ * @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ * Reads the links register to determine if link is up and the current speed
+ **/
+static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *link_up,
+ bool autoneg_wait_to_complete)
+{
+ u32 links_reg;
+
+ if (!(hw->mbx.ops.check_for_rst(hw))) {
+ *link_up = false;
+ *speed = 0;
+ return -1;
+ }
+
+ links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
+
+ if (links_reg & IXGBE_LINKS_UP)
+ *link_up = true;
+ else
+ *link_up = false;
+
+ if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
+ IXGBE_LINKS_SPEED_10G_82599)
+ *speed = IXGBE_LINK_SPEED_10GB_FULL;
+ else
+ *speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+ return 0;
+}
+
+static struct ixgbe_mac_operations ixgbevf_mac_ops = {
+ .init_hw = ixgbevf_init_hw_vf,
+ .reset_hw = ixgbevf_reset_hw_vf,
+ .start_hw = ixgbevf_start_hw_vf,
+ .get_mac_addr = ixgbevf_get_mac_addr_vf,
+ .stop_adapter = ixgbevf_stop_hw_vf,
+ .setup_link = ixgbevf_setup_mac_link_vf,
+ .check_link = ixgbevf_check_mac_link_vf,
+ .set_rar = ixgbevf_set_rar_vf,
+ .update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
+ .set_uc_addr = ixgbevf_set_uc_addr_vf,
+ .set_vfta = ixgbevf_set_vfta_vf,
+};
+
+struct ixgbevf_info ixgbevf_82599_vf_info = {
+ .mac = ixgbe_mac_82599_vf,
+ .mac_ops = &ixgbevf_mac_ops,
+};
+
+struct ixgbevf_info ixgbevf_X540_vf_info = {
+ .mac = ixgbe_mac_X540_vf,
+ .mac_ops = &ixgbevf_mac_ops,
+};
--- /dev/null
+/*******************************************************************************
+
+ Intel 82599 Virtual Function driver
+ Copyright(c) 1999 - 2010 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+#ifndef __IXGBE_VF_H__
+#define __IXGBE_VF_H__
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/if_ether.h>
+#include <linux/netdevice.h>
+
+#include "defines.h"
+#include "regs.h"
+#include "mbx.h"
+
+struct ixgbe_hw;
+
+/* iterator type for walking multicast address lists */
+typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
+ u32 *vmdq);
+struct ixgbe_mac_operations {
+ s32 (*init_hw)(struct ixgbe_hw *);
+ s32 (*reset_hw)(struct ixgbe_hw *);
+ s32 (*start_hw)(struct ixgbe_hw *);
+ s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
+ enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
+ u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
+ s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
+ s32 (*stop_adapter)(struct ixgbe_hw *);
+ s32 (*get_bus_info)(struct ixgbe_hw *);
+
+ /* Link */
+ s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
+ s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
+ s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
+ bool *);
+
+ /* RAR, Multicast, VLAN */
+ s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32);
+ s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
+ s32 (*init_rx_addrs)(struct ixgbe_hw *);
+ s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
+ s32 (*enable_mc)(struct ixgbe_hw *);
+ s32 (*disable_mc)(struct ixgbe_hw *);
+ s32 (*clear_vfta)(struct ixgbe_hw *);
+ s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+};
+
+enum ixgbe_mac_type {
+ ixgbe_mac_unknown = 0,
+ ixgbe_mac_82599_vf,
+ ixgbe_mac_X540_vf,
+ ixgbe_num_macs
+};
+
+struct ixgbe_mac_info {
+ struct ixgbe_mac_operations ops;
+ u8 addr[6];
+ u8 perm_addr[6];
+
+ enum ixgbe_mac_type type;
+
+ s32 mc_filter_type;
+
+ bool get_link_status;
+ u32 max_tx_queues;
+ u32 max_rx_queues;
+ u32 max_msix_vectors;
+};
+
+struct ixgbe_mbx_operations {
+ s32 (*init_params)(struct ixgbe_hw *hw);
+ s32 (*read)(struct ixgbe_hw *, u32 *, u16);
+ s32 (*write)(struct ixgbe_hw *, u32 *, u16);
+ s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16);
+ s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16);
+ s32 (*check_for_msg)(struct ixgbe_hw *);
+ s32 (*check_for_ack)(struct ixgbe_hw *);
+ s32 (*check_for_rst)(struct ixgbe_hw *);
+};
+
+struct ixgbe_mbx_stats {
+ u32 msgs_tx;
+ u32 msgs_rx;
+
+ u32 acks;
+ u32 reqs;
+ u32 rsts;
+};
+
+struct ixgbe_mbx_info {
+ struct ixgbe_mbx_operations ops;
+ struct ixgbe_mbx_stats stats;
+ u32 timeout;
+ u32 udelay;
+ u32 v2p_mailbox;
+ u16 size;
+};
+
+struct ixgbe_hw {
+ void *back;
+
+ u8 __iomem *hw_addr;
+
+ struct ixgbe_mac_info mac;
+ struct ixgbe_mbx_info mbx;
+
+ u16 device_id;
+ u16 subsystem_vendor_id;
+ u16 subsystem_device_id;
+ u16 vendor_id;
+
+ u8 revision_id;
+ bool adapter_stopped;
+};
+
+struct ixgbevf_hw_stats {
+ u64 base_vfgprc;
+ u64 base_vfgptc;
+ u64 base_vfgorc;
+ u64 base_vfgotc;
+ u64 base_vfmprc;
+
+ u64 last_vfgprc;
+ u64 last_vfgptc;
+ u64 last_vfgorc;
+ u64 last_vfgotc;
+ u64 last_vfmprc;
+
+ u64 vfgprc;
+ u64 vfgptc;
+ u64 vfgorc;
+ u64 vfgotc;
+ u64 vfmprc;
+
+ u64 saved_reset_vfgprc;
+ u64 saved_reset_vfgptc;
+ u64 saved_reset_vfgorc;
+ u64 saved_reset_vfgotc;
+ u64 saved_reset_vfmprc;
+};
+
+struct ixgbevf_info {
+ enum ixgbe_mac_type mac;
+ struct ixgbe_mac_operations *mac_ops;
+};
+
+#endif /* __IXGBE_VF_H__ */
+
+++ /dev/null
-################################################################################
-#
-# Intel 82575 PCI-Express Ethernet Linux driver
-# Copyright(c) 1999 - 2011 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# Linux NICS <linux.nics@intel.com>
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) 82575 PCI-Express ethernet driver
-#
-
-obj-$(CONFIG_IGB) += igb.o
-
-igb-objs := igb_main.o igb_ethtool.o e1000_82575.o \
- e1000_mac.o e1000_nvm.o e1000_phy.o e1000_mbx.o
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* e1000_82575
- * e1000_82576
- */
-
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-#include "e1000_mac.h"
-#include "e1000_82575.h"
-
-static s32 igb_get_invariants_82575(struct e1000_hw *);
-static s32 igb_acquire_phy_82575(struct e1000_hw *);
-static void igb_release_phy_82575(struct e1000_hw *);
-static s32 igb_acquire_nvm_82575(struct e1000_hw *);
-static void igb_release_nvm_82575(struct e1000_hw *);
-static s32 igb_check_for_link_82575(struct e1000_hw *);
-static s32 igb_get_cfg_done_82575(struct e1000_hw *);
-static s32 igb_init_hw_82575(struct e1000_hw *);
-static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *);
-static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16 *);
-static s32 igb_read_phy_reg_82580(struct e1000_hw *, u32, u16 *);
-static s32 igb_write_phy_reg_82580(struct e1000_hw *, u32, u16);
-static s32 igb_reset_hw_82575(struct e1000_hw *);
-static s32 igb_reset_hw_82580(struct e1000_hw *);
-static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *, bool);
-static s32 igb_setup_copper_link_82575(struct e1000_hw *);
-static s32 igb_setup_serdes_link_82575(struct e1000_hw *);
-static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *, u32, u16);
-static void igb_clear_hw_cntrs_82575(struct e1000_hw *);
-static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *, u16);
-static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *, u16 *,
- u16 *);
-static s32 igb_get_phy_id_82575(struct e1000_hw *);
-static void igb_release_swfw_sync_82575(struct e1000_hw *, u16);
-static bool igb_sgmii_active_82575(struct e1000_hw *);
-static s32 igb_reset_init_script_82575(struct e1000_hw *);
-static s32 igb_read_mac_addr_82575(struct e1000_hw *);
-static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw);
-static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw);
-static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw);
-static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw);
-static s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw,
- u16 offset);
-static s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw,
- u16 offset);
-static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw);
-static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw);
-static const u16 e1000_82580_rxpbs_table[] =
- { 36, 72, 144, 1, 2, 4, 8, 16,
- 35, 70, 140 };
-#define E1000_82580_RXPBS_TABLE_SIZE \
- (sizeof(e1000_82580_rxpbs_table)/sizeof(u16))
-
-/**
- * igb_sgmii_uses_mdio_82575 - Determine if I2C pins are for external MDIO
- * @hw: pointer to the HW structure
- *
- * Called to determine if the I2C pins are being used for I2C or as an
- * external MDIO interface since the two options are mutually exclusive.
- **/
-static bool igb_sgmii_uses_mdio_82575(struct e1000_hw *hw)
-{
- u32 reg = 0;
- bool ext_mdio = false;
-
- switch (hw->mac.type) {
- case e1000_82575:
- case e1000_82576:
- reg = rd32(E1000_MDIC);
- ext_mdio = !!(reg & E1000_MDIC_DEST);
- break;
- case e1000_82580:
- case e1000_i350:
- reg = rd32(E1000_MDICNFG);
- ext_mdio = !!(reg & E1000_MDICNFG_EXT_MDIO);
- break;
- default:
- break;
- }
- return ext_mdio;
-}
-
-static s32 igb_get_invariants_82575(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- struct e1000_nvm_info *nvm = &hw->nvm;
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_dev_spec_82575 * dev_spec = &hw->dev_spec._82575;
- u32 eecd;
- s32 ret_val;
- u16 size;
- u32 ctrl_ext = 0;
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82575EB_COPPER:
- case E1000_DEV_ID_82575EB_FIBER_SERDES:
- case E1000_DEV_ID_82575GB_QUAD_COPPER:
- mac->type = e1000_82575;
- break;
- case E1000_DEV_ID_82576:
- case E1000_DEV_ID_82576_NS:
- case E1000_DEV_ID_82576_NS_SERDES:
- case E1000_DEV_ID_82576_FIBER:
- case E1000_DEV_ID_82576_SERDES:
- case E1000_DEV_ID_82576_QUAD_COPPER:
- case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
- case E1000_DEV_ID_82576_SERDES_QUAD:
- mac->type = e1000_82576;
- break;
- case E1000_DEV_ID_82580_COPPER:
- case E1000_DEV_ID_82580_FIBER:
- case E1000_DEV_ID_82580_QUAD_FIBER:
- case E1000_DEV_ID_82580_SERDES:
- case E1000_DEV_ID_82580_SGMII:
- case E1000_DEV_ID_82580_COPPER_DUAL:
- case E1000_DEV_ID_DH89XXCC_SGMII:
- case E1000_DEV_ID_DH89XXCC_SERDES:
- case E1000_DEV_ID_DH89XXCC_BACKPLANE:
- case E1000_DEV_ID_DH89XXCC_SFP:
- mac->type = e1000_82580;
- break;
- case E1000_DEV_ID_I350_COPPER:
- case E1000_DEV_ID_I350_FIBER:
- case E1000_DEV_ID_I350_SERDES:
- case E1000_DEV_ID_I350_SGMII:
- mac->type = e1000_i350;
- break;
- default:
- return -E1000_ERR_MAC_INIT;
- break;
- }
-
- /* Set media type */
- /*
- * The 82575 uses bits 22:23 for link mode. The mode can be changed
- * based on the EEPROM. We cannot rely upon device ID. There
- * is no distinguishable difference between fiber and internal
- * SerDes mode on the 82575. There can be an external PHY attached
- * on the SGMII interface. For this, we'll set sgmii_active to true.
- */
- phy->media_type = e1000_media_type_copper;
- dev_spec->sgmii_active = false;
-
- ctrl_ext = rd32(E1000_CTRL_EXT);
- switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
- case E1000_CTRL_EXT_LINK_MODE_SGMII:
- dev_spec->sgmii_active = true;
- break;
- case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- case E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES:
- hw->phy.media_type = e1000_media_type_internal_serdes;
- break;
- default:
- break;
- }
-
- /* Set mta register count */
- mac->mta_reg_count = 128;
- /* Set rar entry count */
- mac->rar_entry_count = E1000_RAR_ENTRIES_82575;
- if (mac->type == e1000_82576)
- mac->rar_entry_count = E1000_RAR_ENTRIES_82576;
- if (mac->type == e1000_82580)
- mac->rar_entry_count = E1000_RAR_ENTRIES_82580;
- if (mac->type == e1000_i350)
- mac->rar_entry_count = E1000_RAR_ENTRIES_I350;
- /* reset */
- if (mac->type >= e1000_82580)
- mac->ops.reset_hw = igb_reset_hw_82580;
- else
- mac->ops.reset_hw = igb_reset_hw_82575;
- /* Set if part includes ASF firmware */
- mac->asf_firmware_present = true;
- /* Set if manageability features are enabled. */
- mac->arc_subsystem_valid =
- (rd32(E1000_FWSM) & E1000_FWSM_MODE_MASK)
- ? true : false;
- /* enable EEE on i350 parts */
- if (mac->type == e1000_i350)
- dev_spec->eee_disable = false;
- else
- dev_spec->eee_disable = true;
- /* physical interface link setup */
- mac->ops.setup_physical_interface =
- (hw->phy.media_type == e1000_media_type_copper)
- ? igb_setup_copper_link_82575
- : igb_setup_serdes_link_82575;
-
- /* NVM initialization */
- eecd = rd32(E1000_EECD);
-
- nvm->opcode_bits = 8;
- nvm->delay_usec = 1;
- switch (nvm->override) {
- case e1000_nvm_override_spi_large:
- nvm->page_size = 32;
- nvm->address_bits = 16;
- break;
- case e1000_nvm_override_spi_small:
- nvm->page_size = 8;
- nvm->address_bits = 8;
- break;
- default:
- nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
- nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
- break;
- }
-
- nvm->type = e1000_nvm_eeprom_spi;
-
- size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
- E1000_EECD_SIZE_EX_SHIFT);
-
- /*
- * Added to a constant, "size" becomes the left-shift value
- * for setting word_size.
- */
- size += NVM_WORD_SIZE_BASE_SHIFT;
-
- /*
- * Check for invalid size
- */
- if ((hw->mac.type == e1000_82576) && (size > 15)) {
- printk("igb: The NVM size is not valid, "
- "defaulting to 32K.\n");
- size = 15;
- }
- nvm->word_size = 1 << size;
- if (nvm->word_size == (1 << 15))
- nvm->page_size = 128;
-
- /* NVM Function Pointers */
- nvm->ops.acquire = igb_acquire_nvm_82575;
- if (nvm->word_size < (1 << 15))
- nvm->ops.read = igb_read_nvm_eerd;
- else
- nvm->ops.read = igb_read_nvm_spi;
-
- nvm->ops.release = igb_release_nvm_82575;
- switch (hw->mac.type) {
- case e1000_82580:
- nvm->ops.validate = igb_validate_nvm_checksum_82580;
- nvm->ops.update = igb_update_nvm_checksum_82580;
- break;
- case e1000_i350:
- nvm->ops.validate = igb_validate_nvm_checksum_i350;
- nvm->ops.update = igb_update_nvm_checksum_i350;
- break;
- default:
- nvm->ops.validate = igb_validate_nvm_checksum;
- nvm->ops.update = igb_update_nvm_checksum;
- }
- nvm->ops.write = igb_write_nvm_spi;
-
- /* if part supports SR-IOV then initialize mailbox parameters */
- switch (mac->type) {
- case e1000_82576:
- case e1000_i350:
- igb_init_mbx_params_pf(hw);
- break;
- default:
- break;
- }
-
- /* setup PHY parameters */
- if (phy->media_type != e1000_media_type_copper) {
- phy->type = e1000_phy_none;
- return 0;
- }
-
- phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- phy->reset_delay_us = 100;
-
- ctrl_ext = rd32(E1000_CTRL_EXT);
-
- /* PHY function pointers */
- if (igb_sgmii_active_82575(hw)) {
- phy->ops.reset = igb_phy_hw_reset_sgmii_82575;
- ctrl_ext |= E1000_CTRL_I2C_ENA;
- } else {
- phy->ops.reset = igb_phy_hw_reset;
- ctrl_ext &= ~E1000_CTRL_I2C_ENA;
- }
-
- wr32(E1000_CTRL_EXT, ctrl_ext);
- igb_reset_mdicnfg_82580(hw);
-
- if (igb_sgmii_active_82575(hw) && !igb_sgmii_uses_mdio_82575(hw)) {
- phy->ops.read_reg = igb_read_phy_reg_sgmii_82575;
- phy->ops.write_reg = igb_write_phy_reg_sgmii_82575;
- } else if (hw->mac.type >= e1000_82580) {
- phy->ops.read_reg = igb_read_phy_reg_82580;
- phy->ops.write_reg = igb_write_phy_reg_82580;
- } else {
- phy->ops.read_reg = igb_read_phy_reg_igp;
- phy->ops.write_reg = igb_write_phy_reg_igp;
- }
-
- /* set lan id */
- hw->bus.func = (rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) >>
- E1000_STATUS_FUNC_SHIFT;
-
- /* Set phy->phy_addr and phy->id. */
- ret_val = igb_get_phy_id_82575(hw);
- if (ret_val)
- return ret_val;
-
- /* Verify phy id and set remaining function pointers */
- switch (phy->id) {
- case I347AT4_E_PHY_ID:
- case M88E1112_E_PHY_ID:
- case M88E1111_I_PHY_ID:
- phy->type = e1000_phy_m88;
- phy->ops.get_phy_info = igb_get_phy_info_m88;
-
- if (phy->id == I347AT4_E_PHY_ID ||
- phy->id == M88E1112_E_PHY_ID)
- phy->ops.get_cable_length = igb_get_cable_length_m88_gen2;
- else
- phy->ops.get_cable_length = igb_get_cable_length_m88;
-
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
- break;
- case IGP03E1000_E_PHY_ID:
- phy->type = e1000_phy_igp_3;
- phy->ops.get_phy_info = igb_get_phy_info_igp;
- phy->ops.get_cable_length = igb_get_cable_length_igp_2;
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_igp;
- phy->ops.set_d0_lplu_state = igb_set_d0_lplu_state_82575;
- phy->ops.set_d3_lplu_state = igb_set_d3_lplu_state;
- break;
- case I82580_I_PHY_ID:
- case I350_I_PHY_ID:
- phy->type = e1000_phy_82580;
- phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_82580;
- phy->ops.get_cable_length = igb_get_cable_length_82580;
- phy->ops.get_phy_info = igb_get_phy_info_82580;
- break;
- default:
- return -E1000_ERR_PHY;
- }
-
- return 0;
-}
-
-/**
- * igb_acquire_phy_82575 - Acquire rights to access PHY
- * @hw: pointer to the HW structure
- *
- * Acquire access rights to the correct PHY. This is a
- * function pointer entry point called by the api module.
- **/
-static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
-{
- u16 mask = E1000_SWFW_PHY0_SM;
-
- if (hw->bus.func == E1000_FUNC_1)
- mask = E1000_SWFW_PHY1_SM;
- else if (hw->bus.func == E1000_FUNC_2)
- mask = E1000_SWFW_PHY2_SM;
- else if (hw->bus.func == E1000_FUNC_3)
- mask = E1000_SWFW_PHY3_SM;
-
- return igb_acquire_swfw_sync_82575(hw, mask);
-}
-
-/**
- * igb_release_phy_82575 - Release rights to access PHY
- * @hw: pointer to the HW structure
- *
- * A wrapper to release access rights to the correct PHY. This is a
- * function pointer entry point called by the api module.
- **/
-static void igb_release_phy_82575(struct e1000_hw *hw)
-{
- u16 mask = E1000_SWFW_PHY0_SM;
-
- if (hw->bus.func == E1000_FUNC_1)
- mask = E1000_SWFW_PHY1_SM;
- else if (hw->bus.func == E1000_FUNC_2)
- mask = E1000_SWFW_PHY2_SM;
- else if (hw->bus.func == E1000_FUNC_3)
- mask = E1000_SWFW_PHY3_SM;
-
- igb_release_swfw_sync_82575(hw, mask);
-}
-
-/**
- * igb_read_phy_reg_sgmii_82575 - Read PHY register using sgmii
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the PHY register at offset using the serial gigabit media independent
- * interface and stores the retrieved information in data.
- **/
-static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
- u16 *data)
-{
- s32 ret_val = -E1000_ERR_PARAM;
-
- if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
- hw_dbg("PHY Address %u is out of range\n", offset);
- goto out;
- }
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_read_phy_reg_i2c(hw, offset, data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_phy_reg_sgmii_82575 - Write PHY register using sgmii
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes the data to PHY register at the offset using the serial gigabit
- * media independent interface.
- **/
-static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
- u16 data)
-{
- s32 ret_val = -E1000_ERR_PARAM;
-
-
- if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
- hw_dbg("PHY Address %d is out of range\n", offset);
- goto out;
- }
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_write_phy_reg_i2c(hw, offset, data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_phy_id_82575 - Retrieve PHY addr and id
- * @hw: pointer to the HW structure
- *
- * Retrieves the PHY address and ID for both PHY's which do and do not use
- * sgmi interface.
- **/
-static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 phy_id;
- u32 ctrl_ext;
- u32 mdic;
-
- /*
- * For SGMII PHYs, we try the list of possible addresses until
- * we find one that works. For non-SGMII PHYs
- * (e.g. integrated copper PHYs), an address of 1 should
- * work. The result of this function should mean phy->phy_addr
- * and phy->id are set correctly.
- */
- if (!(igb_sgmii_active_82575(hw))) {
- phy->addr = 1;
- ret_val = igb_get_phy_id(hw);
- goto out;
- }
-
- if (igb_sgmii_uses_mdio_82575(hw)) {
- switch (hw->mac.type) {
- case e1000_82575:
- case e1000_82576:
- mdic = rd32(E1000_MDIC);
- mdic &= E1000_MDIC_PHY_MASK;
- phy->addr = mdic >> E1000_MDIC_PHY_SHIFT;
- break;
- case e1000_82580:
- case e1000_i350:
- mdic = rd32(E1000_MDICNFG);
- mdic &= E1000_MDICNFG_PHY_MASK;
- phy->addr = mdic >> E1000_MDICNFG_PHY_SHIFT;
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- goto out;
- break;
- }
- ret_val = igb_get_phy_id(hw);
- goto out;
- }
-
- /* Power on sgmii phy if it is disabled */
- ctrl_ext = rd32(E1000_CTRL_EXT);
- wr32(E1000_CTRL_EXT, ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA);
- wrfl();
- msleep(300);
-
- /*
- * The address field in the I2CCMD register is 3 bits and 0 is invalid.
- * Therefore, we need to test 1-7
- */
- for (phy->addr = 1; phy->addr < 8; phy->addr++) {
- ret_val = igb_read_phy_reg_sgmii_82575(hw, PHY_ID1, &phy_id);
- if (ret_val == 0) {
- hw_dbg("Vendor ID 0x%08X read at address %u\n",
- phy_id, phy->addr);
- /*
- * At the time of this writing, The M88 part is
- * the only supported SGMII PHY product.
- */
- if (phy_id == M88_VENDOR)
- break;
- } else {
- hw_dbg("PHY address %u was unreadable\n", phy->addr);
- }
- }
-
- /* A valid PHY type couldn't be found. */
- if (phy->addr == 8) {
- phy->addr = 0;
- ret_val = -E1000_ERR_PHY;
- goto out;
- } else {
- ret_val = igb_get_phy_id(hw);
- }
-
- /* restore previous sfp cage power state */
- wr32(E1000_CTRL_EXT, ctrl_ext);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_hw_reset_sgmii_82575 - Performs a PHY reset
- * @hw: pointer to the HW structure
- *
- * Resets the PHY using the serial gigabit media independent interface.
- **/
-static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- /*
- * This isn't a true "hard" reset, but is the only reset
- * available to us at this time.
- */
-
- hw_dbg("Soft resetting SGMII attached PHY...\n");
-
- /*
- * SFP documentation requires the following to configure the SPF module
- * to work on SGMII. No further documentation is given.
- */
- ret_val = hw->phy.ops.write_reg(hw, 0x1B, 0x8084);
- if (ret_val)
- goto out;
-
- ret_val = igb_phy_sw_reset(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_set_d0_lplu_state_82575 - Set Low Power Linkup D0 state
- * @hw: pointer to the HW structure
- * @active: true to enable LPLU, false to disable
- *
- * Sets the LPLU D0 state according to the active flag. When
- * activating LPLU this function also disables smart speed
- * and vice versa. LPLU will not be activated unless the
- * device autonegotiation advertisement meets standards of
- * either 10 or 10/100 or 10/100/1000 at all duplexes.
- * This is a function pointer entry point only called by
- * PHY setup routines.
- **/
-static s32 igb_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
- if (ret_val)
- goto out;
-
- if (active) {
- data |= IGP02E1000_PM_D0_LPLU;
- ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- data);
- if (ret_val)
- goto out;
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- goto out;
- } else {
- data &= ~IGP02E1000_PM_D0_LPLU;
- ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- data);
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = phy->ops.read_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG, &data);
- if (ret_val)
- goto out;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG, data);
- if (ret_val)
- goto out;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = phy->ops.read_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG, &data);
- if (ret_val)
- goto out;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG, data);
- if (ret_val)
- goto out;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_acquire_nvm_82575 - Request for access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Acquire the necessary semaphores for exclusive access to the EEPROM.
- * Set the EEPROM access request bit and wait for EEPROM access grant bit.
- * Return successful if access grant bit set, else clear the request for
- * EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-static s32 igb_acquire_nvm_82575(struct e1000_hw *hw)
-{
- s32 ret_val;
-
- ret_val = igb_acquire_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
- if (ret_val)
- goto out;
-
- ret_val = igb_acquire_nvm(hw);
-
- if (ret_val)
- igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_release_nvm_82575 - Release exclusive access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Stop any current commands to the EEPROM and clear the EEPROM request bit,
- * then release the semaphores acquired.
- **/
-static void igb_release_nvm_82575(struct e1000_hw *hw)
-{
- igb_release_nvm(hw);
- igb_release_swfw_sync_82575(hw, E1000_SWFW_EEP_SM);
-}
-
-/**
- * igb_acquire_swfw_sync_82575 - Acquire SW/FW semaphore
- * @hw: pointer to the HW structure
- * @mask: specifies which semaphore to acquire
- *
- * Acquire the SW/FW semaphore to access the PHY or NVM. The mask
- * will also specify which port we're acquiring the lock for.
- **/
-static s32 igb_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
-{
- u32 swfw_sync;
- u32 swmask = mask;
- u32 fwmask = mask << 16;
- s32 ret_val = 0;
- s32 i = 0, timeout = 200; /* FIXME: find real value to use here */
-
- while (i < timeout) {
- if (igb_get_hw_semaphore(hw)) {
- ret_val = -E1000_ERR_SWFW_SYNC;
- goto out;
- }
-
- swfw_sync = rd32(E1000_SW_FW_SYNC);
- if (!(swfw_sync & (fwmask | swmask)))
- break;
-
- /*
- * Firmware currently using resource (fwmask)
- * or other software thread using resource (swmask)
- */
- igb_put_hw_semaphore(hw);
- mdelay(5);
- i++;
- }
-
- if (i == timeout) {
- hw_dbg("Driver can't access resource, SW_FW_SYNC timeout.\n");
- ret_val = -E1000_ERR_SWFW_SYNC;
- goto out;
- }
-
- swfw_sync |= swmask;
- wr32(E1000_SW_FW_SYNC, swfw_sync);
-
- igb_put_hw_semaphore(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_release_swfw_sync_82575 - Release SW/FW semaphore
- * @hw: pointer to the HW structure
- * @mask: specifies which semaphore to acquire
- *
- * Release the SW/FW semaphore used to access the PHY or NVM. The mask
- * will also specify which port we're releasing the lock for.
- **/
-static void igb_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask)
-{
- u32 swfw_sync;
-
- while (igb_get_hw_semaphore(hw) != 0);
- /* Empty */
-
- swfw_sync = rd32(E1000_SW_FW_SYNC);
- swfw_sync &= ~mask;
- wr32(E1000_SW_FW_SYNC, swfw_sync);
-
- igb_put_hw_semaphore(hw);
-}
-
-/**
- * igb_get_cfg_done_82575 - Read config done bit
- * @hw: pointer to the HW structure
- *
- * Read the management control register for the config done bit for
- * completion status. NOTE: silicon which is EEPROM-less will fail trying
- * to read the config done bit, so an error is *ONLY* logged and returns
- * 0. If we were to return with error, EEPROM-less silicon
- * would not be able to be reset or change link.
- **/
-static s32 igb_get_cfg_done_82575(struct e1000_hw *hw)
-{
- s32 timeout = PHY_CFG_TIMEOUT;
- s32 ret_val = 0;
- u32 mask = E1000_NVM_CFG_DONE_PORT_0;
-
- if (hw->bus.func == 1)
- mask = E1000_NVM_CFG_DONE_PORT_1;
- else if (hw->bus.func == E1000_FUNC_2)
- mask = E1000_NVM_CFG_DONE_PORT_2;
- else if (hw->bus.func == E1000_FUNC_3)
- mask = E1000_NVM_CFG_DONE_PORT_3;
-
- while (timeout) {
- if (rd32(E1000_EEMNGCTL) & mask)
- break;
- msleep(1);
- timeout--;
- }
- if (!timeout)
- hw_dbg("MNG configuration cycle has not completed.\n");
-
- /* If EEPROM is not marked present, init the PHY manually */
- if (((rd32(E1000_EECD) & E1000_EECD_PRES) == 0) &&
- (hw->phy.type == e1000_phy_igp_3))
- igb_phy_init_script_igp3(hw);
-
- return ret_val;
-}
-
-/**
- * igb_check_for_link_82575 - Check for link
- * @hw: pointer to the HW structure
- *
- * If sgmii is enabled, then use the pcs register to determine link, otherwise
- * use the generic interface for determining link.
- **/
-static s32 igb_check_for_link_82575(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 speed, duplex;
-
- if (hw->phy.media_type != e1000_media_type_copper) {
- ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
- &duplex);
- /*
- * Use this flag to determine if link needs to be checked or
- * not. If we have link clear the flag so that we do not
- * continue to check for link.
- */
- hw->mac.get_link_status = !hw->mac.serdes_has_link;
- } else {
- ret_val = igb_check_for_copper_link(hw);
- }
-
- return ret_val;
-}
-
-/**
- * igb_power_up_serdes_link_82575 - Power up the serdes link after shutdown
- * @hw: pointer to the HW structure
- **/
-void igb_power_up_serdes_link_82575(struct e1000_hw *hw)
-{
- u32 reg;
-
-
- if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
- !igb_sgmii_active_82575(hw))
- return;
-
- /* Enable PCS to turn on link */
- reg = rd32(E1000_PCS_CFG0);
- reg |= E1000_PCS_CFG_PCS_EN;
- wr32(E1000_PCS_CFG0, reg);
-
- /* Power up the laser */
- reg = rd32(E1000_CTRL_EXT);
- reg &= ~E1000_CTRL_EXT_SDP3_DATA;
- wr32(E1000_CTRL_EXT, reg);
-
- /* flush the write to verify completion */
- wrfl();
- msleep(1);
-}
-
-/**
- * igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
- * @hw: pointer to the HW structure
- * @speed: stores the current speed
- * @duplex: stores the current duplex
- *
- * Using the physical coding sub-layer (PCS), retrieve the current speed and
- * duplex, then store the values in the pointers provided.
- **/
-static s32 igb_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 pcs;
-
- /* Set up defaults for the return values of this function */
- mac->serdes_has_link = false;
- *speed = 0;
- *duplex = 0;
-
- /*
- * Read the PCS Status register for link state. For non-copper mode,
- * the status register is not accurate. The PCS status register is
- * used instead.
- */
- pcs = rd32(E1000_PCS_LSTAT);
-
- /*
- * The link up bit determines when link is up on autoneg. The sync ok
- * gets set once both sides sync up and agree upon link. Stable link
- * can be determined by checking for both link up and link sync ok
- */
- if ((pcs & E1000_PCS_LSTS_LINK_OK) && (pcs & E1000_PCS_LSTS_SYNK_OK)) {
- mac->serdes_has_link = true;
-
- /* Detect and store PCS speed */
- if (pcs & E1000_PCS_LSTS_SPEED_1000) {
- *speed = SPEED_1000;
- } else if (pcs & E1000_PCS_LSTS_SPEED_100) {
- *speed = SPEED_100;
- } else {
- *speed = SPEED_10;
- }
-
- /* Detect and store PCS duplex */
- if (pcs & E1000_PCS_LSTS_DUPLEX_FULL) {
- *duplex = FULL_DUPLEX;
- } else {
- *duplex = HALF_DUPLEX;
- }
- }
-
- return 0;
-}
-
-/**
- * igb_shutdown_serdes_link_82575 - Remove link during power down
- * @hw: pointer to the HW structure
- *
- * In the case of fiber serdes, shut down optics and PCS on driver unload
- * when management pass thru is not enabled.
- **/
-void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
-{
- u32 reg;
-
- if (hw->phy.media_type != e1000_media_type_internal_serdes &&
- igb_sgmii_active_82575(hw))
- return;
-
- if (!igb_enable_mng_pass_thru(hw)) {
- /* Disable PCS to turn off link */
- reg = rd32(E1000_PCS_CFG0);
- reg &= ~E1000_PCS_CFG_PCS_EN;
- wr32(E1000_PCS_CFG0, reg);
-
- /* shutdown the laser */
- reg = rd32(E1000_CTRL_EXT);
- reg |= E1000_CTRL_EXT_SDP3_DATA;
- wr32(E1000_CTRL_EXT, reg);
-
- /* flush the write to verify completion */
- wrfl();
- msleep(1);
- }
-}
-
-/**
- * igb_reset_hw_82575 - Reset hardware
- * @hw: pointer to the HW structure
- *
- * This resets the hardware into a known state. This is a
- * function pointer entry point called by the api module.
- **/
-static s32 igb_reset_hw_82575(struct e1000_hw *hw)
-{
- u32 ctrl, icr;
- s32 ret_val;
-
- /*
- * Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- ret_val = igb_disable_pcie_master(hw);
- if (ret_val)
- hw_dbg("PCI-E Master disable polling has failed.\n");
-
- /* set the completion timeout for interface */
- ret_val = igb_set_pcie_completion_timeout(hw);
- if (ret_val) {
- hw_dbg("PCI-E Set completion timeout has failed.\n");
- }
-
- hw_dbg("Masking off all interrupts\n");
- wr32(E1000_IMC, 0xffffffff);
-
- wr32(E1000_RCTL, 0);
- wr32(E1000_TCTL, E1000_TCTL_PSP);
- wrfl();
-
- msleep(10);
-
- ctrl = rd32(E1000_CTRL);
-
- hw_dbg("Issuing a global reset to MAC\n");
- wr32(E1000_CTRL, ctrl | E1000_CTRL_RST);
-
- ret_val = igb_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- hw_dbg("Auto Read Done did not complete\n");
- }
-
- /* If EEPROM is not present, run manual init scripts */
- if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
- igb_reset_init_script_82575(hw);
-
- /* Clear any pending interrupt events. */
- wr32(E1000_IMC, 0xffffffff);
- icr = rd32(E1000_ICR);
-
- /* Install any alternate MAC address into RAR0 */
- ret_val = igb_check_alt_mac_addr(hw);
-
- return ret_val;
-}
-
-/**
- * igb_init_hw_82575 - Initialize hardware
- * @hw: pointer to the HW structure
- *
- * This inits the hardware readying it for operation.
- **/
-static s32 igb_init_hw_82575(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- u16 i, rar_count = mac->rar_entry_count;
-
- /* Initialize identification LED */
- ret_val = igb_id_led_init(hw);
- if (ret_val) {
- hw_dbg("Error initializing identification LED\n");
- /* This is not fatal and we should not stop init due to this */
- }
-
- /* Disabling VLAN filtering */
- hw_dbg("Initializing the IEEE VLAN\n");
- igb_clear_vfta(hw);
-
- /* Setup the receive address */
- igb_init_rx_addrs(hw, rar_count);
-
- /* Zero out the Multicast HASH table */
- hw_dbg("Zeroing the MTA\n");
- for (i = 0; i < mac->mta_reg_count; i++)
- array_wr32(E1000_MTA, i, 0);
-
- /* Zero out the Unicast HASH table */
- hw_dbg("Zeroing the UTA\n");
- for (i = 0; i < mac->uta_reg_count; i++)
- array_wr32(E1000_UTA, i, 0);
-
- /* Setup link and flow control */
- ret_val = igb_setup_link(hw);
-
- /*
- * Clear all of the statistics registers (clear on read). It is
- * important that we do this after we have tried to establish link
- * because the symbol error count will increment wildly if there
- * is no link.
- */
- igb_clear_hw_cntrs_82575(hw);
-
- return ret_val;
-}
-
-/**
- * igb_setup_copper_link_82575 - Configure copper link settings
- * @hw: pointer to the HW structure
- *
- * Configures the link for auto-neg or forced speed and duplex. Then we check
- * for link, once link is established calls to configure collision distance
- * and flow control are called.
- **/
-static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val;
-
- ctrl = rd32(E1000_CTRL);
- ctrl |= E1000_CTRL_SLU;
- ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- wr32(E1000_CTRL, ctrl);
-
- ret_val = igb_setup_serdes_link_82575(hw);
- if (ret_val)
- goto out;
-
- if (igb_sgmii_active_82575(hw) && !hw->phy.reset_disable) {
- /* allow time for SFP cage time to power up phy */
- msleep(300);
-
- ret_val = hw->phy.ops.reset(hw);
- if (ret_val) {
- hw_dbg("Error resetting the PHY.\n");
- goto out;
- }
- }
- switch (hw->phy.type) {
- case e1000_phy_m88:
- if (hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
- ret_val = igb_copper_link_setup_m88_gen2(hw);
- else
- ret_val = igb_copper_link_setup_m88(hw);
- break;
- case e1000_phy_igp_3:
- ret_val = igb_copper_link_setup_igp(hw);
- break;
- case e1000_phy_82580:
- ret_val = igb_copper_link_setup_82580(hw);
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- break;
- }
-
- if (ret_val)
- goto out;
-
- ret_val = igb_setup_copper_link(hw);
-out:
- return ret_val;
-}
-
-/**
- * igb_setup_serdes_link_82575 - Setup link for serdes
- * @hw: pointer to the HW structure
- *
- * Configure the physical coding sub-layer (PCS) link. The PCS link is
- * used on copper connections where the serialized gigabit media independent
- * interface (sgmii), or serdes fiber is being used. Configures the link
- * for auto-negotiation or forces speed/duplex.
- **/
-static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
-{
- u32 ctrl_ext, ctrl_reg, reg;
- bool pcs_autoneg;
- s32 ret_val = E1000_SUCCESS;
- u16 data;
-
- if ((hw->phy.media_type != e1000_media_type_internal_serdes) &&
- !igb_sgmii_active_82575(hw))
- return ret_val;
-
-
- /*
- * On the 82575, SerDes loopback mode persists until it is
- * explicitly turned off or a power cycle is performed. A read to
- * the register does not indicate its status. Therefore, we ensure
- * loopback mode is disabled during initialization.
- */
- wr32(E1000_SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
-
- /* power on the sfp cage if present */
- ctrl_ext = rd32(E1000_CTRL_EXT);
- ctrl_ext &= ~E1000_CTRL_EXT_SDP3_DATA;
- wr32(E1000_CTRL_EXT, ctrl_ext);
-
- ctrl_reg = rd32(E1000_CTRL);
- ctrl_reg |= E1000_CTRL_SLU;
-
- if (hw->mac.type == e1000_82575 || hw->mac.type == e1000_82576) {
- /* set both sw defined pins */
- ctrl_reg |= E1000_CTRL_SWDPIN0 | E1000_CTRL_SWDPIN1;
-
- /* Set switch control to serdes energy detect */
- reg = rd32(E1000_CONNSW);
- reg |= E1000_CONNSW_ENRGSRC;
- wr32(E1000_CONNSW, reg);
- }
-
- reg = rd32(E1000_PCS_LCTL);
-
- /* default pcs_autoneg to the same setting as mac autoneg */
- pcs_autoneg = hw->mac.autoneg;
-
- switch (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK) {
- case E1000_CTRL_EXT_LINK_MODE_SGMII:
- /* sgmii mode lets the phy handle forcing speed/duplex */
- pcs_autoneg = true;
- /* autoneg time out should be disabled for SGMII mode */
- reg &= ~(E1000_PCS_LCTL_AN_TIMEOUT);
- break;
- case E1000_CTRL_EXT_LINK_MODE_1000BASE_KX:
- /* disable PCS autoneg and support parallel detect only */
- pcs_autoneg = false;
- default:
- if (hw->mac.type == e1000_82575 ||
- hw->mac.type == e1000_82576) {
- ret_val = hw->nvm.ops.read(hw, NVM_COMPAT, 1, &data);
- if (ret_val) {
- printk(KERN_DEBUG "NVM Read Error\n\n");
- return ret_val;
- }
-
- if (data & E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT)
- pcs_autoneg = false;
- }
-
- /*
- * non-SGMII modes only supports a speed of 1000/Full for the
- * link so it is best to just force the MAC and let the pcs
- * link either autoneg or be forced to 1000/Full
- */
- ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD |
- E1000_CTRL_FD | E1000_CTRL_FRCDPX;
-
- /* set speed of 1000/Full if speed/duplex is forced */
- reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL;
- break;
- }
-
- wr32(E1000_CTRL, ctrl_reg);
-
- /*
- * New SerDes mode allows for forcing speed or autonegotiating speed
- * at 1gb. Autoneg should be default set by most drivers. This is the
- * mode that will be compatible with older link partners and switches.
- * However, both are supported by the hardware and some drivers/tools.
- */
- reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP |
- E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK);
-
- /*
- * We force flow control to prevent the CTRL register values from being
- * overwritten by the autonegotiated flow control values
- */
- reg |= E1000_PCS_LCTL_FORCE_FCTRL;
-
- if (pcs_autoneg) {
- /* Set PCS register for autoneg */
- reg |= E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
- E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
- hw_dbg("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg);
- } else {
- /* Set PCS register for forced link */
- reg |= E1000_PCS_LCTL_FSD; /* Force Speed */
-
- hw_dbg("Configuring Forced Link:PCS_LCTL=0x%08X\n", reg);
- }
-
- wr32(E1000_PCS_LCTL, reg);
-
- if (!igb_sgmii_active_82575(hw))
- igb_force_mac_fc(hw);
-
- return ret_val;
-}
-
-/**
- * igb_sgmii_active_82575 - Return sgmii state
- * @hw: pointer to the HW structure
- *
- * 82575 silicon has a serialized gigabit media independent interface (sgmii)
- * which can be enabled for use in the embedded applications. Simply
- * return the current state of the sgmii interface.
- **/
-static bool igb_sgmii_active_82575(struct e1000_hw *hw)
-{
- struct e1000_dev_spec_82575 *dev_spec = &hw->dev_spec._82575;
- return dev_spec->sgmii_active;
-}
-
-/**
- * igb_reset_init_script_82575 - Inits HW defaults after reset
- * @hw: pointer to the HW structure
- *
- * Inits recommended HW defaults after a reset when there is no EEPROM
- * detected. This is only for the 82575.
- **/
-static s32 igb_reset_init_script_82575(struct e1000_hw *hw)
-{
- if (hw->mac.type == e1000_82575) {
- hw_dbg("Running reset init script for 82575\n");
- /* SerDes configuration via SERDESCTRL */
- igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x00, 0x0C);
- igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x01, 0x78);
- igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x1B, 0x23);
- igb_write_8bit_ctrl_reg(hw, E1000_SCTL, 0x23, 0x15);
-
- /* CCM configuration via CCMCTL register */
- igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x14, 0x00);
- igb_write_8bit_ctrl_reg(hw, E1000_CCMCTL, 0x10, 0x00);
-
- /* PCIe lanes configuration */
- igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x00, 0xEC);
- igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x61, 0xDF);
- igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x34, 0x05);
- igb_write_8bit_ctrl_reg(hw, E1000_GIOCTL, 0x2F, 0x81);
-
- /* PCIe PLL Configuration */
- igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x02, 0x47);
- igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x14, 0x00);
- igb_write_8bit_ctrl_reg(hw, E1000_SCCTL, 0x10, 0x00);
- }
-
- return 0;
-}
-
-/**
- * igb_read_mac_addr_82575 - Read device MAC address
- * @hw: pointer to the HW structure
- **/
-static s32 igb_read_mac_addr_82575(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- /*
- * If there's an alternate MAC address place it in RAR0
- * so that it will override the Si installed default perm
- * address.
- */
- ret_val = igb_check_alt_mac_addr(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_read_mac_addr(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_power_down_phy_copper_82575 - Remove link during PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, or wake on lan is not enabled, remove the link.
- **/
-void igb_power_down_phy_copper_82575(struct e1000_hw *hw)
-{
- /* If the management interface is not enabled, then power down */
- if (!(igb_enable_mng_pass_thru(hw) || igb_check_reset_block(hw)))
- igb_power_down_phy_copper(hw);
-}
-
-/**
- * igb_clear_hw_cntrs_82575 - Clear device specific hardware counters
- * @hw: pointer to the HW structure
- *
- * Clears the hardware counters by reading the counter registers.
- **/
-static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
-{
- igb_clear_hw_cntrs_base(hw);
-
- rd32(E1000_PRC64);
- rd32(E1000_PRC127);
- rd32(E1000_PRC255);
- rd32(E1000_PRC511);
- rd32(E1000_PRC1023);
- rd32(E1000_PRC1522);
- rd32(E1000_PTC64);
- rd32(E1000_PTC127);
- rd32(E1000_PTC255);
- rd32(E1000_PTC511);
- rd32(E1000_PTC1023);
- rd32(E1000_PTC1522);
-
- rd32(E1000_ALGNERRC);
- rd32(E1000_RXERRC);
- rd32(E1000_TNCRS);
- rd32(E1000_CEXTERR);
- rd32(E1000_TSCTC);
- rd32(E1000_TSCTFC);
-
- rd32(E1000_MGTPRC);
- rd32(E1000_MGTPDC);
- rd32(E1000_MGTPTC);
-
- rd32(E1000_IAC);
- rd32(E1000_ICRXOC);
-
- rd32(E1000_ICRXPTC);
- rd32(E1000_ICRXATC);
- rd32(E1000_ICTXPTC);
- rd32(E1000_ICTXATC);
- rd32(E1000_ICTXQEC);
- rd32(E1000_ICTXQMTC);
- rd32(E1000_ICRXDMTC);
-
- rd32(E1000_CBTMPC);
- rd32(E1000_HTDPMC);
- rd32(E1000_CBRMPC);
- rd32(E1000_RPTHC);
- rd32(E1000_HGPTC);
- rd32(E1000_HTCBDPC);
- rd32(E1000_HGORCL);
- rd32(E1000_HGORCH);
- rd32(E1000_HGOTCL);
- rd32(E1000_HGOTCH);
- rd32(E1000_LENERRS);
-
- /* This register should not be read in copper configurations */
- if (hw->phy.media_type == e1000_media_type_internal_serdes ||
- igb_sgmii_active_82575(hw))
- rd32(E1000_SCVPC);
-}
-
-/**
- * igb_rx_fifo_flush_82575 - Clean rx fifo after RX enable
- * @hw: pointer to the HW structure
- *
- * After rx enable if managability is enabled then there is likely some
- * bad data at the start of the fifo and possibly in the DMA fifo. This
- * function clears the fifos and flushes any packets that came in as rx was
- * being enabled.
- **/
-void igb_rx_fifo_flush_82575(struct e1000_hw *hw)
-{
- u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
- int i, ms_wait;
-
- if (hw->mac.type != e1000_82575 ||
- !(rd32(E1000_MANC) & E1000_MANC_RCV_TCO_EN))
- return;
-
- /* Disable all RX queues */
- for (i = 0; i < 4; i++) {
- rxdctl[i] = rd32(E1000_RXDCTL(i));
- wr32(E1000_RXDCTL(i),
- rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE);
- }
- /* Poll all queues to verify they have shut down */
- for (ms_wait = 0; ms_wait < 10; ms_wait++) {
- msleep(1);
- rx_enabled = 0;
- for (i = 0; i < 4; i++)
- rx_enabled |= rd32(E1000_RXDCTL(i));
- if (!(rx_enabled & E1000_RXDCTL_QUEUE_ENABLE))
- break;
- }
-
- if (ms_wait == 10)
- hw_dbg("Queue disable timed out after 10ms\n");
-
- /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
- * incoming packets are rejected. Set enable and wait 2ms so that
- * any packet that was coming in as RCTL.EN was set is flushed
- */
- rfctl = rd32(E1000_RFCTL);
- wr32(E1000_RFCTL, rfctl & ~E1000_RFCTL_LEF);
-
- rlpml = rd32(E1000_RLPML);
- wr32(E1000_RLPML, 0);
-
- rctl = rd32(E1000_RCTL);
- temp_rctl = rctl & ~(E1000_RCTL_EN | E1000_RCTL_SBP);
- temp_rctl |= E1000_RCTL_LPE;
-
- wr32(E1000_RCTL, temp_rctl);
- wr32(E1000_RCTL, temp_rctl | E1000_RCTL_EN);
- wrfl();
- msleep(2);
-
- /* Enable RX queues that were previously enabled and restore our
- * previous state
- */
- for (i = 0; i < 4; i++)
- wr32(E1000_RXDCTL(i), rxdctl[i]);
- wr32(E1000_RCTL, rctl);
- wrfl();
-
- wr32(E1000_RLPML, rlpml);
- wr32(E1000_RFCTL, rfctl);
-
- /* Flush receive errors generated by workaround */
- rd32(E1000_ROC);
- rd32(E1000_RNBC);
- rd32(E1000_MPC);
-}
-
-/**
- * igb_set_pcie_completion_timeout - set pci-e completion timeout
- * @hw: pointer to the HW structure
- *
- * The defaults for 82575 and 82576 should be in the range of 50us to 50ms,
- * however the hardware default for these parts is 500us to 1ms which is less
- * than the 10ms recommended by the pci-e spec. To address this we need to
- * increase the value to either 10ms to 200ms for capability version 1 config,
- * or 16ms to 55ms for version 2.
- **/
-static s32 igb_set_pcie_completion_timeout(struct e1000_hw *hw)
-{
- u32 gcr = rd32(E1000_GCR);
- s32 ret_val = 0;
- u16 pcie_devctl2;
-
- /* only take action if timeout value is defaulted to 0 */
- if (gcr & E1000_GCR_CMPL_TMOUT_MASK)
- goto out;
-
- /*
- * if capababilities version is type 1 we can write the
- * timeout of 10ms to 200ms through the GCR register
- */
- if (!(gcr & E1000_GCR_CAP_VER2)) {
- gcr |= E1000_GCR_CMPL_TMOUT_10ms;
- goto out;
- }
-
- /*
- * for version 2 capabilities we need to write the config space
- * directly in order to set the completion timeout value for
- * 16ms to 55ms
- */
- ret_val = igb_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
- &pcie_devctl2);
- if (ret_val)
- goto out;
-
- pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms;
-
- ret_val = igb_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2,
- &pcie_devctl2);
-out:
- /* disable completion timeout resend */
- gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND;
-
- wr32(E1000_GCR, gcr);
- return ret_val;
-}
-
-/**
- * igb_vmdq_set_anti_spoofing_pf - enable or disable anti-spoofing
- * @hw: pointer to the hardware struct
- * @enable: state to enter, either enabled or disabled
- * @pf: Physical Function pool - do not set anti-spoofing for the PF
- *
- * enables/disables L2 switch anti-spoofing functionality.
- **/
-void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf)
-{
- u32 dtxswc;
-
- switch (hw->mac.type) {
- case e1000_82576:
- case e1000_i350:
- dtxswc = rd32(E1000_DTXSWC);
- if (enable) {
- dtxswc |= (E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- /* The PF can spoof - it has to in order to
- * support emulation mode NICs */
- dtxswc ^= (1 << pf | 1 << (pf + MAX_NUM_VFS));
- } else {
- dtxswc &= ~(E1000_DTXSWC_MAC_SPOOF_MASK |
- E1000_DTXSWC_VLAN_SPOOF_MASK);
- }
- wr32(E1000_DTXSWC, dtxswc);
- break;
- default:
- break;
- }
-}
-
-/**
- * igb_vmdq_set_loopback_pf - enable or disable vmdq loopback
- * @hw: pointer to the hardware struct
- * @enable: state to enter, either enabled or disabled
- *
- * enables/disables L2 switch loopback functionality.
- **/
-void igb_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable)
-{
- u32 dtxswc = rd32(E1000_DTXSWC);
-
- if (enable)
- dtxswc |= E1000_DTXSWC_VMDQ_LOOPBACK_EN;
- else
- dtxswc &= ~E1000_DTXSWC_VMDQ_LOOPBACK_EN;
-
- wr32(E1000_DTXSWC, dtxswc);
-}
-
-/**
- * igb_vmdq_set_replication_pf - enable or disable vmdq replication
- * @hw: pointer to the hardware struct
- * @enable: state to enter, either enabled or disabled
- *
- * enables/disables replication of packets across multiple pools.
- **/
-void igb_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable)
-{
- u32 vt_ctl = rd32(E1000_VT_CTL);
-
- if (enable)
- vt_ctl |= E1000_VT_CTL_VM_REPL_EN;
- else
- vt_ctl &= ~E1000_VT_CTL_VM_REPL_EN;
-
- wr32(E1000_VT_CTL, vt_ctl);
-}
-
-/**
- * igb_read_phy_reg_82580 - Read 82580 MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the MDI control register in the PHY at offset and stores the
- * information read to data.
- **/
-static s32 igb_read_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val;
-
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_read_phy_reg_mdic(hw, offset, data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_phy_reg_82580 - Write 82580 MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write to register at offset
- *
- * Writes data to MDI control register in the PHY at offset.
- **/
-static s32 igb_write_phy_reg_82580(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val;
-
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_write_phy_reg_mdic(hw, offset, data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_reset_mdicnfg_82580 - Reset MDICNFG destination and com_mdio bits
- * @hw: pointer to the HW structure
- *
- * This resets the the MDICNFG.Destination and MDICNFG.Com_MDIO bits based on
- * the values found in the EEPROM. This addresses an issue in which these
- * bits are not restored from EEPROM after reset.
- **/
-static s32 igb_reset_mdicnfg_82580(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u32 mdicnfg;
- u16 nvm_data = 0;
-
- if (hw->mac.type != e1000_82580)
- goto out;
- if (!igb_sgmii_active_82575(hw))
- goto out;
-
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
- NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
- &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- mdicnfg = rd32(E1000_MDICNFG);
- if (nvm_data & NVM_WORD24_EXT_MDIO)
- mdicnfg |= E1000_MDICNFG_EXT_MDIO;
- if (nvm_data & NVM_WORD24_COM_MDIO)
- mdicnfg |= E1000_MDICNFG_COM_MDIO;
- wr32(E1000_MDICNFG, mdicnfg);
-out:
- return ret_val;
-}
-
-/**
- * igb_reset_hw_82580 - Reset hardware
- * @hw: pointer to the HW structure
- *
- * This resets function or entire device (all ports, etc.)
- * to a known state.
- **/
-static s32 igb_reset_hw_82580(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- /* BH SW mailbox bit in SW_FW_SYNC */
- u16 swmbsw_mask = E1000_SW_SYNCH_MB;
- u32 ctrl, icr;
- bool global_device_reset = hw->dev_spec._82575.global_device_reset;
-
-
- hw->dev_spec._82575.global_device_reset = false;
-
- /* Get current control state. */
- ctrl = rd32(E1000_CTRL);
-
- /*
- * Prevent the PCI-E bus from sticking if there is no TLP connection
- * on the last TLP read/write transaction when MAC is reset.
- */
- ret_val = igb_disable_pcie_master(hw);
- if (ret_val)
- hw_dbg("PCI-E Master disable polling has failed.\n");
-
- hw_dbg("Masking off all interrupts\n");
- wr32(E1000_IMC, 0xffffffff);
- wr32(E1000_RCTL, 0);
- wr32(E1000_TCTL, E1000_TCTL_PSP);
- wrfl();
-
- msleep(10);
-
- /* Determine whether or not a global dev reset is requested */
- if (global_device_reset &&
- igb_acquire_swfw_sync_82575(hw, swmbsw_mask))
- global_device_reset = false;
-
- if (global_device_reset &&
- !(rd32(E1000_STATUS) & E1000_STAT_DEV_RST_SET))
- ctrl |= E1000_CTRL_DEV_RST;
- else
- ctrl |= E1000_CTRL_RST;
-
- wr32(E1000_CTRL, ctrl);
- wrfl();
-
- /* Add delay to insure DEV_RST has time to complete */
- if (global_device_reset)
- msleep(5);
-
- ret_val = igb_get_auto_rd_done(hw);
- if (ret_val) {
- /*
- * When auto config read does not complete, do not
- * return with an error. This can happen in situations
- * where there is no eeprom and prevents getting link.
- */
- hw_dbg("Auto Read Done did not complete\n");
- }
-
- /* If EEPROM is not present, run manual init scripts */
- if ((rd32(E1000_EECD) & E1000_EECD_PRES) == 0)
- igb_reset_init_script_82575(hw);
-
- /* clear global device reset status bit */
- wr32(E1000_STATUS, E1000_STAT_DEV_RST_SET);
-
- /* Clear any pending interrupt events. */
- wr32(E1000_IMC, 0xffffffff);
- icr = rd32(E1000_ICR);
-
- ret_val = igb_reset_mdicnfg_82580(hw);
- if (ret_val)
- hw_dbg("Could not reset MDICNFG based on EEPROM\n");
-
- /* Install any alternate MAC address into RAR0 */
- ret_val = igb_check_alt_mac_addr(hw);
-
- /* Release semaphore */
- if (global_device_reset)
- igb_release_swfw_sync_82575(hw, swmbsw_mask);
-
- return ret_val;
-}
-
-/**
- * igb_rxpbs_adjust_82580 - adjust RXPBS value to reflect actual RX PBA size
- * @data: data received by reading RXPBS register
- *
- * The 82580 uses a table based approach for packet buffer allocation sizes.
- * This function converts the retrieved value into the correct table value
- * 0x0 0x1 0x2 0x3 0x4 0x5 0x6 0x7
- * 0x0 36 72 144 1 2 4 8 16
- * 0x8 35 70 140 rsv rsv rsv rsv rsv
- */
-u16 igb_rxpbs_adjust_82580(u32 data)
-{
- u16 ret_val = 0;
-
- if (data < E1000_82580_RXPBS_TABLE_SIZE)
- ret_val = e1000_82580_rxpbs_table[data];
-
- return ret_val;
-}
-
-/**
- * igb_validate_nvm_checksum_with_offset - Validate EEPROM
- * checksum
- * @hw: pointer to the HW structure
- * @offset: offset in words of the checksum protected region
- *
- * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- * and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 igb_validate_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
-{
- s32 ret_val = 0;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = offset; i < ((NVM_CHECKSUM_REG + offset) + 1); i++) {
- ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
- checksum += nvm_data;
- }
-
- if (checksum != (u16) NVM_SUM) {
- hw_dbg("NVM Checksum Invalid\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_update_nvm_checksum_with_offset - Update EEPROM
- * checksum
- * @hw: pointer to the HW structure
- * @offset: offset in words of the checksum protected region
- *
- * Updates the EEPROM checksum by reading/adding each word of the EEPROM
- * up to the checksum. Then calculates the EEPROM checksum and writes the
- * value to the EEPROM.
- **/
-s32 igb_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = offset; i < (NVM_CHECKSUM_REG + offset); i++) {
- ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error while updating checksum.\n");
- goto out;
- }
- checksum += nvm_data;
- }
- checksum = (u16) NVM_SUM - checksum;
- ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1,
- &checksum);
- if (ret_val)
- hw_dbg("NVM Write Error while updating checksum.\n");
-
-out:
- return ret_val;
-}
-
-/**
- * igb_validate_nvm_checksum_82580 - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM section checksum by reading/adding each word of
- * the EEPROM and then verifies that the sum of the EEPROM is
- * equal to 0xBABA.
- **/
-static s32 igb_validate_nvm_checksum_82580(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 eeprom_regions_count = 1;
- u16 j, nvm_data;
- u16 nvm_offset;
-
- ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (nvm_data & NVM_COMPATIBILITY_BIT_MASK) {
- /* if checksums compatibility bit is set validate checksums
- * for all 4 ports. */
- eeprom_regions_count = 4;
- }
-
- for (j = 0; j < eeprom_regions_count; j++) {
- nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
- ret_val = igb_validate_nvm_checksum_with_offset(hw,
- nvm_offset);
- if (ret_val != 0)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_update_nvm_checksum_82580 - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM section checksums for all 4 ports by reading/adding
- * each word of the EEPROM up to the checksum. Then calculates the EEPROM
- * checksum and writes the value to the EEPROM.
- **/
-static s32 igb_update_nvm_checksum_82580(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 j, nvm_data;
- u16 nvm_offset;
-
- ret_val = hw->nvm.ops.read(hw, NVM_COMPATIBILITY_REG_3, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error while updating checksum"
- " compatibility bit.\n");
- goto out;
- }
-
- if ((nvm_data & NVM_COMPATIBILITY_BIT_MASK) == 0) {
- /* set compatibility bit to validate checksums appropriately */
- nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK;
- ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1,
- &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Write Error while updating checksum"
- " compatibility bit.\n");
- goto out;
- }
- }
-
- for (j = 0; j < 4; j++) {
- nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
- ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_validate_nvm_checksum_i350 - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM section checksum by reading/adding each word of
- * the EEPROM and then verifies that the sum of the EEPROM is
- * equal to 0xBABA.
- **/
-static s32 igb_validate_nvm_checksum_i350(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 j;
- u16 nvm_offset;
-
- for (j = 0; j < 4; j++) {
- nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
- ret_val = igb_validate_nvm_checksum_with_offset(hw,
- nvm_offset);
- if (ret_val != 0)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_update_nvm_checksum_i350 - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM section checksums for all 4 ports by reading/adding
- * each word of the EEPROM up to the checksum. Then calculates the EEPROM
- * checksum and writes the value to the EEPROM.
- **/
-static s32 igb_update_nvm_checksum_i350(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 j;
- u16 nvm_offset;
-
- for (j = 0; j < 4; j++) {
- nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j);
- ret_val = igb_update_nvm_checksum_with_offset(hw, nvm_offset);
- if (ret_val != 0)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_set_eee_i350 - Enable/disable EEE support
- * @hw: pointer to the HW structure
- *
- * Enable/disable EEE based on setting in dev_spec structure.
- *
- **/
-s32 igb_set_eee_i350(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u32 ipcnfg, eeer, ctrl_ext;
-
- ctrl_ext = rd32(E1000_CTRL_EXT);
- if ((hw->mac.type != e1000_i350) ||
- (ctrl_ext & E1000_CTRL_EXT_LINK_MODE_MASK))
- goto out;
- ipcnfg = rd32(E1000_IPCNFG);
- eeer = rd32(E1000_EEER);
-
- /* enable or disable per user setting */
- if (!(hw->dev_spec._82575.eee_disable)) {
- ipcnfg |= (E1000_IPCNFG_EEE_1G_AN |
- E1000_IPCNFG_EEE_100M_AN);
- eeer |= (E1000_EEER_TX_LPI_EN |
- E1000_EEER_RX_LPI_EN |
- E1000_EEER_LPI_FC);
-
- } else {
- ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN |
- E1000_IPCNFG_EEE_100M_AN);
- eeer &= ~(E1000_EEER_TX_LPI_EN |
- E1000_EEER_RX_LPI_EN |
- E1000_EEER_LPI_FC);
- }
- wr32(E1000_IPCNFG, ipcnfg);
- wr32(E1000_EEER, eeer);
-out:
-
- return ret_val;
-}
-
-static struct e1000_mac_operations e1000_mac_ops_82575 = {
- .init_hw = igb_init_hw_82575,
- .check_for_link = igb_check_for_link_82575,
- .rar_set = igb_rar_set,
- .read_mac_addr = igb_read_mac_addr_82575,
- .get_speed_and_duplex = igb_get_speed_and_duplex_copper,
-};
-
-static struct e1000_phy_operations e1000_phy_ops_82575 = {
- .acquire = igb_acquire_phy_82575,
- .get_cfg_done = igb_get_cfg_done_82575,
- .release = igb_release_phy_82575,
-};
-
-static struct e1000_nvm_operations e1000_nvm_ops_82575 = {
- .acquire = igb_acquire_nvm_82575,
- .read = igb_read_nvm_eerd,
- .release = igb_release_nvm_82575,
- .write = igb_write_nvm_spi,
-};
-
-const struct e1000_info e1000_82575_info = {
- .get_invariants = igb_get_invariants_82575,
- .mac_ops = &e1000_mac_ops_82575,
- .phy_ops = &e1000_phy_ops_82575,
- .nvm_ops = &e1000_nvm_ops_82575,
-};
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_82575_H_
-#define _E1000_82575_H_
-
-extern void igb_shutdown_serdes_link_82575(struct e1000_hw *hw);
-extern void igb_power_up_serdes_link_82575(struct e1000_hw *hw);
-extern void igb_power_down_phy_copper_82575(struct e1000_hw *hw);
-extern void igb_rx_fifo_flush_82575(struct e1000_hw *hw);
-
-#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \
- (ID_LED_DEF1_DEF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_OFF1_ON2))
-
-#define E1000_RAR_ENTRIES_82575 16
-#define E1000_RAR_ENTRIES_82576 24
-#define E1000_RAR_ENTRIES_82580 24
-#define E1000_RAR_ENTRIES_I350 32
-
-#define E1000_SW_SYNCH_MB 0x00000100
-#define E1000_STAT_DEV_RST_SET 0x00100000
-#define E1000_CTRL_DEV_RST 0x20000000
-
-/* SRRCTL bit definitions */
-#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
-#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
-#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
-#define E1000_SRRCTL_DROP_EN 0x80000000
-#define E1000_SRRCTL_TIMESTAMP 0x40000000
-
-#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002
-#define E1000_MRQC_ENABLE_VMDQ 0x00000003
-#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005
-#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
-#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
-#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000
-
-#define E1000_EICR_TX_QUEUE ( \
- E1000_EICR_TX_QUEUE0 | \
- E1000_EICR_TX_QUEUE1 | \
- E1000_EICR_TX_QUEUE2 | \
- E1000_EICR_TX_QUEUE3)
-
-#define E1000_EICR_RX_QUEUE ( \
- E1000_EICR_RX_QUEUE0 | \
- E1000_EICR_RX_QUEUE1 | \
- E1000_EICR_RX_QUEUE2 | \
- E1000_EICR_RX_QUEUE3)
-
-/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
-#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
-#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */
-
-/* Receive Descriptor - Advanced */
-union e1000_adv_rx_desc {
- struct {
- __le64 pkt_addr; /* Packet buffer address */
- __le64 hdr_addr; /* Header buffer address */
- } read;
- struct {
- struct {
- struct {
- __le16 pkt_info; /* RSS type, Packet type */
- __le16 hdr_info; /* Split Header,
- * header buffer length */
- } lo_dword;
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length; /* Packet length */
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
-#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
-#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */
-#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */
-
-/* Transmit Descriptor - Advanced */
-union e1000_adv_tx_desc {
- struct {
- __le64 buffer_addr; /* Address of descriptor's data buf */
- __le32 cmd_type_len;
- __le32 olinfo_status;
- } read;
- struct {
- __le64 rsvd; /* Reserved */
- __le32 nxtseq_seed;
- __le32 status;
- } wb;
-};
-
-/* Adv Transmit Descriptor Config Masks */
-#define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp packet */
-#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
-#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
-#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
-#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
-#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
-#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
-
-/* Context descriptors */
-struct e1000_adv_tx_context_desc {
- __le32 vlan_macip_lens;
- __le32 seqnum_seed;
- __le32 type_tucmd_mlhl;
- __le32 mss_l4len_idx;
-};
-
-#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 packet TYPE of SCTP */
-/* IPSec Encrypt Enable for ESP */
-#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
-/* Adv ctxt IPSec SA IDX mask */
-/* Adv ctxt IPSec ESP len mask */
-
-/* Additional Transmit Descriptor Control definitions */
-#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
-/* Tx Queue Arbitration Priority 0=low, 1=high */
-
-/* Additional Receive Descriptor Control definitions */
-#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
-
-/* Direct Cache Access (DCA) definitions */
-#define E1000_DCA_CTRL_DCA_MODE_DISABLE 0x01 /* DCA Disable */
-#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
-
-#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
-#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
-#define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
-#define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
-
-#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
-#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
-#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-
-/* Additional DCA related definitions, note change in position of CPUID */
-#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */
-#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */
-#define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
-#define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
-
-/* ETQF register bit definitions */
-#define E1000_ETQF_FILTER_ENABLE (1 << 26)
-#define E1000_ETQF_1588 (1 << 30)
-
-/* FTQF register bit definitions */
-#define E1000_FTQF_VF_BP 0x00008000
-#define E1000_FTQF_1588_TIME_STAMP 0x08000000
-#define E1000_FTQF_MASK 0xF0000000
-#define E1000_FTQF_MASK_PROTO_BP 0x10000000
-#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
-
-#define E1000_NVM_APME_82575 0x0400
-#define MAX_NUM_VFS 8
-
-#define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof control */
-#define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof control */
-#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */
-#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8
-#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */
-
-/* Easy defines for setting default pool, would normally be left a zero */
-#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7
-#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT)
-
-/* Other useful VMD_CTL register defines */
-#define E1000_VT_CTL_IGNORE_MAC (1 << 28)
-#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29)
-#define E1000_VT_CTL_VM_REPL_EN (1 << 30)
-
-/* Per VM Offload register setup */
-#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */
-#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */
-#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */
-#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */
-#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */
-#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */
-#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */
-#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */
-#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */
-#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */
-
-#define E1000_VLVF_ARRAY_SIZE 32
-#define E1000_VLVF_VLANID_MASK 0x00000FFF
-#define E1000_VLVF_POOLSEL_SHIFT 12
-#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT)
-#define E1000_VLVF_LVLAN 0x00100000
-#define E1000_VLVF_VLANID_ENABLE 0x80000000
-
-#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
-#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
-
-#define E1000_IOVCTL 0x05BBC
-#define E1000_IOVCTL_REUSE_VFQ 0x00000001
-
-#define E1000_RPLOLR_STRVLAN 0x40000000
-#define E1000_RPLOLR_STRCRC 0x80000000
-
-#define E1000_DTXCTL_8023LL 0x0004
-#define E1000_DTXCTL_VLAN_ADDED 0x0008
-#define E1000_DTXCTL_OOS_ENABLE 0x0010
-#define E1000_DTXCTL_MDP_EN 0x0020
-#define E1000_DTXCTL_SPOOF_INT 0x0040
-
-#define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14)
-
-#define ALL_QUEUES 0xFFFF
-
-/* RX packet buffer size defines */
-#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F
-void igb_vmdq_set_anti_spoofing_pf(struct e1000_hw *, bool, int);
-void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
-void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
-u16 igb_rxpbs_adjust_82580(u32 data);
-s32 igb_set_eee_i350(struct e1000_hw *);
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */
-
-/* Wake Up Filter Control */
-#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-
-/* Extended Device Control */
-#define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* Value of SW Defineable Pin 3 */
-/* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD 0x00004000
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
-#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
-#define E1000_CTRL_EXT_EIAME 0x01000000
-#define E1000_CTRL_EXT_IRCA 0x00000001
-/* Interrupt delay cancellation */
-/* Driver loaded bit for FW */
-#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
-/* Interrupt acknowledge Auto-mask */
-/* Clear Interrupt timers after IMS clear */
-/* packet buffer parity error detection enabled */
-/* descriptor FIFO parity error detection enable */
-#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
-#define E1000_I2CCMD_REG_ADDR_SHIFT 16
-#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
-#define E1000_I2CCMD_OPCODE_READ 0x08000000
-#define E1000_I2CCMD_OPCODE_WRITE 0x00000000
-#define E1000_I2CCMD_READY 0x20000000
-#define E1000_I2CCMD_ERROR 0x80000000
-#define E1000_MAX_SGMII_PHY_REG_ADDR 255
-#define E1000_I2CCMD_PHY_TIMEOUT 200
-#define E1000_IVAR_VALID 0x80
-#define E1000_GPIE_NSICR 0x00000001
-#define E1000_GPIE_MSIX_MODE 0x00000010
-#define E1000_GPIE_EIAME 0x40000000
-#define E1000_GPIE_PBA 0x80000000
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_TS 0x10000 /* Pkt was time stamped */
-
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_TCPE 0x20000000
-#define E1000_RXDEXT_STATERR_IPE 0x40000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
-
-#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
-#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000
-#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000
-#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
-
-
-/* Management Control */
-#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */
-#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */
-#define E1000_MANC_EN_BMC2OS 0x10000000 /* OSBMC is Enabled or not */
-/* Enable Neighbor Discovery Filtering */
-#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */
-#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */
-/* Enable MAC address filtering */
-#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000
-
-/* Receive Control */
-#define E1000_RCTL_EN 0x00000002 /* enable */
-#define E1000_RCTL_SBP 0x00000004 /* store bad packet */
-#define E1000_RCTL_UPE 0x00000008 /* unicast promiscuous enable */
-#define E1000_RCTL_MPE 0x00000010 /* multicast promiscuous enab */
-#define E1000_RCTL_LPE 0x00000020 /* long packet enable */
-#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */
-#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */
-#define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */
-#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */
-#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */
-#define E1000_RCTL_SZ_512 0x00020000 /* rx buffer size 512 */
-#define E1000_RCTL_SZ_256 0x00030000 /* rx buffer size 256 */
-#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */
-#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */
-#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */
-
-/*
- * Use byte values for the following shift parameters
- * Usage:
- * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
- * E1000_PSRCTL_BSIZE0_MASK) |
- * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
- * E1000_PSRCTL_BSIZE1_MASK) |
- * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
- * E1000_PSRCTL_BSIZE2_MASK) |
- * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
- * E1000_PSRCTL_BSIZE3_MASK))
- * where value0 = [128..16256], default=256
- * value1 = [1024..64512], default=4096
- * value2 = [0..64512], default=4096
- * value3 = [0..64512], default=0
- */
-
-#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F
-#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00
-#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000
-#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000
-
-#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */
-#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */
-#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */
-#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */
-
-/* SWFW_SYNC Definitions */
-#define E1000_SWFW_EEP_SM 0x1
-#define E1000_SWFW_PHY0_SM 0x2
-#define E1000_SWFW_PHY1_SM 0x4
-#define E1000_SWFW_PHY2_SM 0x20
-#define E1000_SWFW_PHY3_SM 0x40
-
-/* FACTPS Definitions */
-/* Device Control */
-#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
-#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */
-#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */
-#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */
-#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */
-#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */
-#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */
-#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */
-#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */
-#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */
-#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */
-/* Defined polarity of Dock/Undock indication in SDP[0] */
-/* Reset both PHY ports, through PHYRST_N pin */
-/* enable link status from external LINK_0 and LINK_1 pins */
-#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */
-#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */
-#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */
-#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */
-#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */
-#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */
-/* Initiate an interrupt to manageability engine */
-#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */
-
-/* Bit definitions for the Management Data IO (MDIO) and Management Data
- * Clock (MDC) pins in the Device Control Register.
- */
-
-#define E1000_CONNSW_ENRGSRC 0x4
-#define E1000_PCS_CFG_PCS_EN 8
-#define E1000_PCS_LCTL_FLV_LINK_UP 1
-#define E1000_PCS_LCTL_FSV_100 2
-#define E1000_PCS_LCTL_FSV_1000 4
-#define E1000_PCS_LCTL_FDV_FULL 8
-#define E1000_PCS_LCTL_FSD 0x10
-#define E1000_PCS_LCTL_FORCE_LINK 0x20
-#define E1000_PCS_LCTL_FORCE_FCTRL 0x80
-#define E1000_PCS_LCTL_AN_ENABLE 0x10000
-#define E1000_PCS_LCTL_AN_RESTART 0x20000
-#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000
-#define E1000_ENABLE_SERDES_LOOPBACK 0x0410
-
-#define E1000_PCS_LSTS_LINK_OK 1
-#define E1000_PCS_LSTS_SPEED_100 2
-#define E1000_PCS_LSTS_SPEED_1000 4
-#define E1000_PCS_LSTS_DUPLEX_FULL 8
-#define E1000_PCS_LSTS_SYNK_OK 0x10
-
-/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */
-#define E1000_STATUS_FUNC_SHIFT 2
-#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-/* Change in Dock/Undock state. Clear on write '0'. */
-/* Status of Master requests. */
-#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000
-/* BMC external code execution disabled */
-
-/* Constants used to intrepret the masked PCI-X bus speed. */
-
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-
-#define ADVERTISE_10_HALF 0x0001
-#define ADVERTISE_10_FULL 0x0002
-#define ADVERTISE_100_HALF 0x0004
-#define ADVERTISE_100_FULL 0x0008
-#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */
-#define ADVERTISE_1000_FULL 0x0020
-
-/* 1000/H is not supported, nor spec-compliant. */
-#define E1000_ALL_SPEED_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_NOT_GIG (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \
- ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL)
-#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL)
-#define E1000_ALL_FULL_DUPLEX (ADVERTISE_10_FULL | ADVERTISE_100_FULL | \
- ADVERTISE_1000_FULL)
-#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF)
-
-#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX
-
-/* LED Control */
-#define E1000_LEDCTL_LED0_MODE_SHIFT 0
-#define E1000_LEDCTL_LED0_BLINK 0x00000080
-
-#define E1000_LEDCTL_MODE_LED_ON 0xE
-#define E1000_LEDCTL_MODE_LED_OFF 0xF
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-/* Extended desc bits for Linksec and timesync */
-
-/* Transmit Control */
-#define E1000_TCTL_EN 0x00000002 /* enable tx */
-#define E1000_TCTL_PSP 0x00000008 /* pad short packets */
-#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */
-#define E1000_TCTL_COLD 0x003ff000 /* collision distance */
-#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */
-
-/* DMA Coalescing register fields */
-#define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coalescing
- * Watchdog Timer */
-#define E1000_DMACR_DMACTHR_MASK 0x00FF0000 /* DMA Coalescing Receive
- * Threshold */
-#define E1000_DMACR_DMACTHR_SHIFT 16
-#define E1000_DMACR_DMAC_LX_MASK 0x30000000 /* Lx when no PCIe
- * transactions */
-#define E1000_DMACR_DMAC_LX_SHIFT 28
-#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */
-
-#define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF /* DMA Coalescing Transmit
- * Threshold */
-
-#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */
-
-#define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF /* Receive Traffic Rate
- * Threshold */
-#define E1000_DMCRTRH_LRPRCW 0x80000000 /* Rcv packet rate in
- * current window */
-
-#define E1000_DMCCNT_CCOUNT_MASK 0x01FFFFFF /* DMA Coal Rcv Traffic
- * Current Cnt */
-
-#define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 /* Flow ctrl Rcv Threshold
- * High val */
-#define E1000_FCRTC_RTH_COAL_SHIFT 4
-#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision */
-
-/* SerDes Control */
-#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400
-
-/* Receive Checksum Control */
-#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */
-#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */
-#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */
-#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
-
-/* Header split receive */
-#define E1000_RFCTL_LEF 0x00040000
-
-/* Collision related configuration parameters */
-#define E1000_COLLISION_THRESHOLD 15
-#define E1000_CT_SHIFT 4
-#define E1000_COLLISION_DISTANCE 63
-#define E1000_COLD_SHIFT 12
-
-/* Ethertype field values */
-#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */
-
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* PBA constants */
-#define E1000_PBA_34K 0x0022
-#define E1000_PBA_64K 0x0040 /* 64KB */
-
-/* SW Semaphore Register */
-#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-
-/* Interrupt Cause Read */
-#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */
-#define E1000_ICR_LSC 0x00000004 /* Link Status Change */
-#define E1000_ICR_RXSEQ 0x00000008 /* rx sequence error */
-#define E1000_ICR_RXDMT0 0x00000010 /* rx desc min. threshold (0) */
-#define E1000_ICR_RXT0 0x00000080 /* rx timer intr (ring 0) */
-#define E1000_ICR_VMMB 0x00000100 /* VM MB event */
-#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */
-/* If this bit asserted, the driver should claim the interrupt */
-#define E1000_ICR_INT_ASSERTED 0x80000000
-/* LAN connected device generates an interrupt */
-#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */
-
-/* Extended Interrupt Cause Read */
-#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */
-#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */
-#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */
-#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */
-#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */
-#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */
-#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */
-#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */
-#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
-/* TCP Timer */
-
-/*
- * This defines the bits that are set in the Interrupt Mask
- * Set/Read Register. Each bit is documented below:
- * o RXT0 = Receiver Timer Interrupt (ring 0)
- * o TXDW = Transmit Descriptor Written Back
- * o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
- * o RXSEQ = Receive Sequence Error
- * o LSC = Link Status Change
- */
-#define IMS_ENABLE_MASK ( \
- E1000_IMS_RXT0 | \
- E1000_IMS_TXDW | \
- E1000_IMS_RXDMT0 | \
- E1000_IMS_RXSEQ | \
- E1000_IMS_LSC | \
- E1000_IMS_DOUTSYNC)
-
-/* Interrupt Mask Set */
-#define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */
-#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */
-#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* rx sequence error */
-#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* rx timer intr */
-#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */
-#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */
-
-/* Extended Interrupt Mask Set */
-#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */
-
-/* Interrupt Cause Set */
-#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */
-#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* rx desc min. threshold */
-#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */
-
-/* Extended Interrupt Cause Set */
-
-/* Transmit Descriptor Control */
-/* Enable the counting of descriptors still to be processed. */
-
-/* Flow Control Constants */
-#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001
-#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
-#define FLOW_CONTROL_TYPE 0x8808
-
-/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
-#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-
-/* Receive Address */
-/*
- * Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * Technically, we have 16 spots. However, we reserve one of these spots
- * (RAR[15]) for our directed address used by controllers with
- * manageability enabled, allowing us room for 15 multicast addresses.
- */
-#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */
-#define E1000_RAL_MAC_ADDR_LEN 4
-#define E1000_RAH_MAC_ADDR_LEN 2
-#define E1000_RAH_POOL_MASK 0x03FC0000
-#define E1000_RAH_POOL_1 0x00040000
-
-/* Error Codes */
-#define E1000_SUCCESS 0
-#define E1000_ERR_NVM 1
-#define E1000_ERR_PHY 2
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_PARAM 4
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_RESET 9
-#define E1000_ERR_MASTER_REQUESTS_PENDING 10
-#define E1000_BLK_PHY_RESET 12
-#define E1000_ERR_SWFW_SYNC 13
-#define E1000_NOT_IMPLEMENTED 14
-#define E1000_ERR_MBX 15
-#define E1000_ERR_INVALID_ARGUMENT 16
-#define E1000_ERR_NO_SPACE 17
-#define E1000_ERR_NVM_PBA_SECTION 18
-
-/* Loop limit on how long we wait for auto-negotiation to complete */
-#define COPPER_LINK_UP_LIMIT 10
-#define PHY_AUTO_NEG_LIMIT 45
-#define PHY_FORCE_LIMIT 20
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define MASTER_DISABLE_TIMEOUT 800
-/* Number of milliseconds we wait for PHY configuration done after MAC reset */
-#define PHY_CFG_TIMEOUT 100
-/* Number of 2 milliseconds we wait for acquiring MDIO ownership. */
-/* Number of milliseconds for NVM auto read done after MAC reset. */
-#define AUTO_READ_DONE_TIMEOUT 10
-
-/* Flow Control */
-#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */
-
-#define E1000_TSYNCTXCTL_VALID 0x00000001 /* tx timestamp valid */
-#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable tx timestampping */
-
-#define E1000_TSYNCRXCTL_VALID 0x00000001 /* rx timestamp valid */
-#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* rx type mask */
-#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00
-#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02
-#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04
-#define E1000_TSYNCRXCTL_TYPE_ALL 0x08
-#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A
-#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable rx timestampping */
-
-#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF
-#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01
-#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02
-#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
-#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
-
-#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00
-#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300
-#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800
-#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900
-#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00
-#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00
-#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00
-#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00
-
-#define E1000_TIMINCA_16NS_SHIFT 24
-
-#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */
-#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */
-#define E1000_MDICNFG_PHY_MASK 0x03E00000
-#define E1000_MDICNFG_PHY_SHIFT 21
-
-/* PCI Express Control */
-#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
-#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000
-#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000
-#define E1000_GCR_CAP_VER2 0x00040000
-
-/* mPHY Address Control and Data Registers */
-#define E1000_MPHY_ADDR_CTL 0x0024 /* mPHY Address Control Register */
-#define E1000_MPHY_ADDR_CTL_OFFSET_MASK 0xFFFF0000
-#define E1000_MPHY_DATA 0x0E10 /* mPHY Data Register */
-
-/* mPHY PCS CLK Register */
-#define E1000_MPHY_PCS_CLK_REG_OFFSET 0x0004 /* mPHY PCS CLK AFE CSR Offset */
-/* mPHY Near End Digital Loopback Override Bit */
-#define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10
-
-/* PHY Control Register */
-#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */
-#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */
-#define MII_CR_POWER_DOWN 0x0800 /* Power down */
-#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */
-#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */
-#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */
-#define MII_CR_SPEED_1000 0x0040
-#define MII_CR_SPEED_100 0x2000
-#define MII_CR_SPEED_10 0x0000
-
-/* PHY Status Register */
-#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */
-#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */
-
-/* Autoneg Advertisement Register */
-#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */
-#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */
-#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */
-#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */
-#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */
-#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */
-
-/* Link Partner Ability Register (Base Page) */
-#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */
-#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */
-
-/* Autoneg Expansion Register */
-
-/* 1000BASE-T Control Register */
-#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */
-#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */
-#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */
- /* 0=Configure PHY as Slave */
-#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */
- /* 0=Automatic Master/Slave config */
-
-/* 1000BASE-T Status Register */
-#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */
-#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */
-
-
-/* PHY 1000 MII Register/Bit Definitions */
-/* PHY Registers defined by IEEE */
-#define PHY_CONTROL 0x00 /* Control Register */
-#define PHY_STATUS 0x01 /* Status Register */
-#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */
-#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
-#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
-#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
-#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
-#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
-
-/* NVM Control */
-#define E1000_EECD_SK 0x00000001 /* NVM Clock */
-#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */
-#define E1000_EECD_DI 0x00000004 /* NVM Data In */
-#define E1000_EECD_DO 0x00000008 /* NVM Data Out */
-#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */
-#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */
-#define E1000_EECD_PRES 0x00000100 /* NVM Present */
-/* NVM Addressing bits based on type 0=small, 1=large */
-#define E1000_EECD_ADDR_BITS 0x00000400
-#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */
-#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */
-#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */
-#define E1000_EECD_SIZE_EX_SHIFT 11
-
-/* Offset to data in NVM read/write registers */
-#define E1000_NVM_RW_REG_DATA 16
-#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */
-#define E1000_NVM_RW_REG_START 1 /* Start operation */
-#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */
-
-/* NVM Word Offsets */
-#define NVM_COMPAT 0x0003
-#define NVM_ID_LED_SETTINGS 0x0004 /* SERDES output amplitude */
-#define NVM_INIT_CONTROL2_REG 0x000F
-#define NVM_INIT_CONTROL3_PORT_B 0x0014
-#define NVM_INIT_CONTROL3_PORT_A 0x0024
-#define NVM_ALT_MAC_ADDR_PTR 0x0037
-#define NVM_CHECKSUM_REG 0x003F
-#define NVM_COMPATIBILITY_REG_3 0x0003
-#define NVM_COMPATIBILITY_BIT_MASK 0x8000
-
-#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */
-#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */
-#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */
-#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */
-
-#define NVM_82580_LAN_FUNC_OFFSET(a) (a ? (0x40 + (0x40 * a)) : 0)
-
-/* Mask bits for fields in Word 0x24 of the NVM */
-#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */
-#define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed external */
-
-/* Mask bits for fields in Word 0x0f of the NVM */
-#define NVM_WORD0F_PAUSE_MASK 0x3000
-#define NVM_WORD0F_ASM_DIR 0x2000
-
-/* Mask bits for fields in Word 0x1a of the NVM */
-
-/* length of string needed to store part num */
-#define E1000_PBANUM_LENGTH 11
-
-/* For checksumming, the sum of all words in the NVM should equal 0xBABA. */
-#define NVM_SUM 0xBABA
-
-#define NVM_PBA_OFFSET_0 8
-#define NVM_PBA_OFFSET_1 9
-#define NVM_PBA_PTR_GUARD 0xFAFA
-#define NVM_WORD_SIZE_BASE_SHIFT 6
-
-/* NVM Commands - Microwire */
-
-/* NVM Commands - SPI */
-#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */
-#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */
-#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */
-#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */
-#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */
-#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */
-
-/* SPI NVM Status Register */
-#define NVM_STATUS_RDY_SPI 0x01
-
-/* Word definitions for ID LED Settings */
-#define ID_LED_RESERVED_0000 0x0000
-#define ID_LED_RESERVED_FFFF 0xFFFF
-#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \
- (ID_LED_OFF1_OFF2 << 8) | \
- (ID_LED_DEF1_DEF2 << 4) | \
- (ID_LED_DEF1_DEF2))
-#define ID_LED_DEF1_DEF2 0x1
-#define ID_LED_DEF1_ON2 0x2
-#define ID_LED_DEF1_OFF2 0x3
-#define ID_LED_ON1_DEF2 0x4
-#define ID_LED_ON1_ON2 0x5
-#define ID_LED_ON1_OFF2 0x6
-#define ID_LED_OFF1_DEF2 0x7
-#define ID_LED_OFF1_ON2 0x8
-#define ID_LED_OFF1_OFF2 0x9
-
-#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF
-#define IGP_ACTIVITY_LED_ENABLE 0x0300
-#define IGP_LED3_MODE 0x07000000
-
-/* PCI/PCI-X/PCI-EX Config space */
-#define PCIE_DEVICE_CONTROL2 0x28
-#define PCIE_DEVICE_CONTROL2_16ms 0x0005
-
-#define PHY_REVISION_MASK 0xFFFFFFF0
-#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */
-#define MAX_PHY_MULTI_PAGE_REG 0xF
-
-/* Bit definitions for valid PHY IDs. */
-/*
- * I = Integrated
- * E = External
- */
-#define M88E1111_I_PHY_ID 0x01410CC0
-#define M88E1112_E_PHY_ID 0x01410C90
-#define I347AT4_E_PHY_ID 0x01410DC0
-#define IGP03E1000_E_PHY_ID 0x02A80390
-#define I82580_I_PHY_ID 0x015403A0
-#define I350_I_PHY_ID 0x015403B0
-#define M88_VENDOR 0x0141
-
-/* M88E1000 Specific Registers */
-#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
-#define M88E1000_PHY_SPEC_STATUS 0x11 /* PHY Specific Status Register */
-#define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
-
-#define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for page number setting */
-#define M88E1000_PHY_GEN_CONTROL 0x1E /* Its meaning depends on reg 29 */
-
-/* M88E1000 PHY Specific Control Register */
-#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reversal enabled */
-/* 1=CLK125 low, 0=CLK125 toggling */
-#define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 /* MDI Crossover Mode bits 6:5 */
- /* Manual MDI configuration */
-#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */
-/* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */
-#define M88E1000_PSCR_AUTO_X_1000T 0x0040
-/* Auto crossover enabled all speeds */
-#define M88E1000_PSCR_AUTO_X_MODE 0x0060
-/*
- * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold
- * 0=Normal 10BASE-T Rx Threshold
- */
-/* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */
-#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Transmit */
-
-/* M88E1000 PHY Specific Status Register */
-#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */
-#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */
-#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */
-/*
- * 0 = <50M
- * 1 = 50-80M
- * 2 = 80-110M
- * 3 = 110-140M
- * 4 = >140M
- */
-#define M88E1000_PSSR_CABLE_LENGTH 0x0380
-#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */
-#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
-
-#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
-
-/* M88E1000 Extended PHY Specific Control Register */
-/*
- * 1 = Lost lock detect enabled.
- * Will assert lost lock and bring
- * link down if idle not seen
- * within 1ms in 1000BASE-T
- */
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
-#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the slave
- */
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300
-#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100
-#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */
-
-/* Intel i347-AT4 Registers */
-
-#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */
-#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */
-#define I347AT4_PAGE_SELECT 0x16
-
-/* i347-AT4 Extended PHY Specific Control Register */
-
-/*
- * Number of times we will attempt to autonegotiate before downshifting if we
- * are the master
- */
-#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800
-#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000
-#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000
-#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000
-#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000
-#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000
-#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000
-#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000
-#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000
-#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000
-
-/* i347-AT4 PHY Cable Diagnostics Control */
-#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */
-
-/* Marvell 1112 only registers */
-#define M88E1112_VCT_DSP_DISTANCE 0x001A
-
-/* M88EC018 Rev 2 specific DownShift settings */
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00
-#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800
-
-/* MDI Control */
-#define E1000_MDIC_DATA_MASK 0x0000FFFF
-#define E1000_MDIC_REG_MASK 0x001F0000
-#define E1000_MDIC_REG_SHIFT 16
-#define E1000_MDIC_PHY_MASK 0x03E00000
-#define E1000_MDIC_PHY_SHIFT 21
-#define E1000_MDIC_OP_WRITE 0x04000000
-#define E1000_MDIC_OP_READ 0x08000000
-#define E1000_MDIC_READY 0x10000000
-#define E1000_MDIC_INT_EN 0x20000000
-#define E1000_MDIC_ERROR 0x40000000
-#define E1000_MDIC_DEST 0x80000000
-
-/* Thermal Sensor */
-#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */
-#define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Speed Throttle Event */
-
-/* Energy Efficient Ethernet */
-#define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* EEE Enable 1G AN */
-#define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* EEE Enable 100M AN */
-#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEE Tx LPI Enable */
-#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEE Rx LPI Enable */
-#define E1000_EEER_LPI_FC 0x00040000 /* EEE Enable on FC */
-
-/* SerDes Control */
-#define E1000_GEN_CTL_READY 0x80000000
-#define E1000_GEN_CTL_ADDRESS_SHIFT 8
-#define E1000_GEN_POLL_TIMEOUT 640
-
-#define E1000_VFTA_ENTRY_SHIFT 5
-#define E1000_VFTA_ENTRY_MASK 0x7F
-#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F
-
-/* DMA Coalescing register fields */
-#define E1000_PCIEMISC_LX_DECISION 0x00000080 /* Lx power decision based
- on DMA coal */
-
-/* Tx Rate-Scheduler Config fields */
-#define E1000_RTTBCNRC_RS_ENA 0x80000000
-#define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF
-#define E1000_RTTBCNRC_RF_INT_SHIFT 14
-#define E1000_RTTBCNRC_RF_INT_MASK \
- (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT)
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_HW_H_
-#define _E1000_HW_H_
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/netdevice.h>
-
-#include "e1000_regs.h"
-#include "e1000_defines.h"
-
-struct e1000_hw;
-
-#define E1000_DEV_ID_82576 0x10C9
-#define E1000_DEV_ID_82576_FIBER 0x10E6
-#define E1000_DEV_ID_82576_SERDES 0x10E7
-#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8
-#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526
-#define E1000_DEV_ID_82576_NS 0x150A
-#define E1000_DEV_ID_82576_NS_SERDES 0x1518
-#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D
-#define E1000_DEV_ID_82575EB_COPPER 0x10A7
-#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9
-#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6
-#define E1000_DEV_ID_82580_COPPER 0x150E
-#define E1000_DEV_ID_82580_FIBER 0x150F
-#define E1000_DEV_ID_82580_SERDES 0x1510
-#define E1000_DEV_ID_82580_SGMII 0x1511
-#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516
-#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527
-#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438
-#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A
-#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C
-#define E1000_DEV_ID_DH89XXCC_SFP 0x0440
-#define E1000_DEV_ID_I350_COPPER 0x1521
-#define E1000_DEV_ID_I350_FIBER 0x1522
-#define E1000_DEV_ID_I350_SERDES 0x1523
-#define E1000_DEV_ID_I350_SGMII 0x1524
-
-#define E1000_REVISION_2 2
-#define E1000_REVISION_4 4
-
-#define E1000_FUNC_0 0
-#define E1000_FUNC_1 1
-#define E1000_FUNC_2 2
-#define E1000_FUNC_3 3
-
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6
-#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9
-
-enum e1000_mac_type {
- e1000_undefined = 0,
- e1000_82575,
- e1000_82576,
- e1000_82580,
- e1000_i350,
- e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
-};
-
-enum e1000_media_type {
- e1000_media_type_unknown = 0,
- e1000_media_type_copper = 1,
- e1000_media_type_internal_serdes = 2,
- e1000_num_media_types
-};
-
-enum e1000_nvm_type {
- e1000_nvm_unknown = 0,
- e1000_nvm_none,
- e1000_nvm_eeprom_spi,
- e1000_nvm_flash_hw,
- e1000_nvm_flash_sw
-};
-
-enum e1000_nvm_override {
- e1000_nvm_override_none = 0,
- e1000_nvm_override_spi_small,
- e1000_nvm_override_spi_large,
-};
-
-enum e1000_phy_type {
- e1000_phy_unknown = 0,
- e1000_phy_none,
- e1000_phy_m88,
- e1000_phy_igp,
- e1000_phy_igp_2,
- e1000_phy_gg82563,
- e1000_phy_igp_3,
- e1000_phy_ife,
- e1000_phy_82580,
-};
-
-enum e1000_bus_type {
- e1000_bus_type_unknown = 0,
- e1000_bus_type_pci,
- e1000_bus_type_pcix,
- e1000_bus_type_pci_express,
- e1000_bus_type_reserved
-};
-
-enum e1000_bus_speed {
- e1000_bus_speed_unknown = 0,
- e1000_bus_speed_33,
- e1000_bus_speed_66,
- e1000_bus_speed_100,
- e1000_bus_speed_120,
- e1000_bus_speed_133,
- e1000_bus_speed_2500,
- e1000_bus_speed_5000,
- e1000_bus_speed_reserved
-};
-
-enum e1000_bus_width {
- e1000_bus_width_unknown = 0,
- e1000_bus_width_pcie_x1,
- e1000_bus_width_pcie_x2,
- e1000_bus_width_pcie_x4 = 4,
- e1000_bus_width_pcie_x8 = 8,
- e1000_bus_width_32,
- e1000_bus_width_64,
- e1000_bus_width_reserved
-};
-
-enum e1000_1000t_rx_status {
- e1000_1000t_rx_status_not_ok = 0,
- e1000_1000t_rx_status_ok,
- e1000_1000t_rx_status_undefined = 0xFF
-};
-
-enum e1000_rev_polarity {
- e1000_rev_polarity_normal = 0,
- e1000_rev_polarity_reversed,
- e1000_rev_polarity_undefined = 0xFF
-};
-
-enum e1000_fc_mode {
- e1000_fc_none = 0,
- e1000_fc_rx_pause,
- e1000_fc_tx_pause,
- e1000_fc_full,
- e1000_fc_default = 0xFF
-};
-
-/* Statistics counters collected by the MAC */
-struct e1000_hw_stats {
- u64 crcerrs;
- u64 algnerrc;
- u64 symerrs;
- u64 rxerrc;
- u64 mpc;
- u64 scc;
- u64 ecol;
- u64 mcc;
- u64 latecol;
- u64 colc;
- u64 dc;
- u64 tncrs;
- u64 sec;
- u64 cexterr;
- u64 rlec;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 fcruc;
- u64 prc64;
- u64 prc127;
- u64 prc255;
- u64 prc511;
- u64 prc1023;
- u64 prc1522;
- u64 gprc;
- u64 bprc;
- u64 mprc;
- u64 gptc;
- u64 gorc;
- u64 gotc;
- u64 rnbc;
- u64 ruc;
- u64 rfc;
- u64 roc;
- u64 rjc;
- u64 mgprc;
- u64 mgpdc;
- u64 mgptc;
- u64 tor;
- u64 tot;
- u64 tpr;
- u64 tpt;
- u64 ptc64;
- u64 ptc127;
- u64 ptc255;
- u64 ptc511;
- u64 ptc1023;
- u64 ptc1522;
- u64 mptc;
- u64 bptc;
- u64 tsctc;
- u64 tsctfc;
- u64 iac;
- u64 icrxptc;
- u64 icrxatc;
- u64 ictxptc;
- u64 ictxatc;
- u64 ictxqec;
- u64 ictxqmtc;
- u64 icrxdmtc;
- u64 icrxoc;
- u64 cbtmpc;
- u64 htdpmc;
- u64 cbrdpc;
- u64 cbrmpc;
- u64 rpthc;
- u64 hgptc;
- u64 htcbdpc;
- u64 hgorc;
- u64 hgotc;
- u64 lenerrs;
- u64 scvpc;
- u64 hrmpc;
- u64 doosync;
- u64 o2bgptc;
- u64 o2bspc;
- u64 b2ospc;
- u64 b2ogprc;
-};
-
-struct e1000_phy_stats {
- u32 idle_errors;
- u32 receive_errors;
-};
-
-struct e1000_host_mng_dhcp_cookie {
- u32 signature;
- u8 status;
- u8 reserved0;
- u16 vlan_id;
- u32 reserved1;
- u16 reserved2;
- u8 reserved3;
- u8 checksum;
-};
-
-/* Host Interface "Rev 1" */
-struct e1000_host_command_header {
- u8 command_id;
- u8 command_length;
- u8 command_options;
- u8 checksum;
-};
-
-#define E1000_HI_MAX_DATA_LENGTH 252
-struct e1000_host_command_info {
- struct e1000_host_command_header command_header;
- u8 command_data[E1000_HI_MAX_DATA_LENGTH];
-};
-
-/* Host Interface "Rev 2" */
-struct e1000_host_mng_command_header {
- u8 command_id;
- u8 checksum;
- u16 reserved1;
- u16 reserved2;
- u16 command_length;
-};
-
-#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8
-struct e1000_host_mng_command_info {
- struct e1000_host_mng_command_header command_header;
- u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];
-};
-
-#include "e1000_mac.h"
-#include "e1000_phy.h"
-#include "e1000_nvm.h"
-#include "e1000_mbx.h"
-
-struct e1000_mac_operations {
- s32 (*check_for_link)(struct e1000_hw *);
- s32 (*reset_hw)(struct e1000_hw *);
- s32 (*init_hw)(struct e1000_hw *);
- bool (*check_mng_mode)(struct e1000_hw *);
- s32 (*setup_physical_interface)(struct e1000_hw *);
- void (*rar_set)(struct e1000_hw *, u8 *, u32);
- s32 (*read_mac_addr)(struct e1000_hw *);
- s32 (*get_speed_and_duplex)(struct e1000_hw *, u16 *, u16 *);
-};
-
-struct e1000_phy_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*check_polarity)(struct e1000_hw *);
- s32 (*check_reset_block)(struct e1000_hw *);
- s32 (*force_speed_duplex)(struct e1000_hw *);
- s32 (*get_cfg_done)(struct e1000_hw *hw);
- s32 (*get_cable_length)(struct e1000_hw *);
- s32 (*get_phy_info)(struct e1000_hw *);
- s32 (*read_reg)(struct e1000_hw *, u32, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*reset)(struct e1000_hw *);
- s32 (*set_d0_lplu_state)(struct e1000_hw *, bool);
- s32 (*set_d3_lplu_state)(struct e1000_hw *, bool);
- s32 (*write_reg)(struct e1000_hw *, u32, u16);
-};
-
-struct e1000_nvm_operations {
- s32 (*acquire)(struct e1000_hw *);
- s32 (*read)(struct e1000_hw *, u16, u16, u16 *);
- void (*release)(struct e1000_hw *);
- s32 (*write)(struct e1000_hw *, u16, u16, u16 *);
- s32 (*update)(struct e1000_hw *);
- s32 (*validate)(struct e1000_hw *);
-};
-
-struct e1000_info {
- s32 (*get_invariants)(struct e1000_hw *);
- struct e1000_mac_operations *mac_ops;
- struct e1000_phy_operations *phy_ops;
- struct e1000_nvm_operations *nvm_ops;
-};
-
-extern const struct e1000_info e1000_82575_info;
-
-struct e1000_mac_info {
- struct e1000_mac_operations ops;
-
- u8 addr[6];
- u8 perm_addr[6];
-
- enum e1000_mac_type type;
-
- u32 ledctl_default;
- u32 ledctl_mode1;
- u32 ledctl_mode2;
- u32 mc_filter_type;
- u32 txcw;
-
- u16 mta_reg_count;
- u16 uta_reg_count;
-
- /* Maximum size of the MTA register table in all supported adapters */
- #define MAX_MTA_REG 128
- u32 mta_shadow[MAX_MTA_REG];
- u16 rar_entry_count;
-
- u8 forced_speed_duplex;
-
- bool adaptive_ifs;
- bool arc_subsystem_valid;
- bool asf_firmware_present;
- bool autoneg;
- bool autoneg_failed;
- bool disable_hw_init_bits;
- bool get_link_status;
- bool ifs_params_forced;
- bool in_ifs_mode;
- bool report_tx_early;
- bool serdes_has_link;
- bool tx_pkt_filtering;
-};
-
-struct e1000_phy_info {
- struct e1000_phy_operations ops;
-
- enum e1000_phy_type type;
-
- enum e1000_1000t_rx_status local_rx;
- enum e1000_1000t_rx_status remote_rx;
- enum e1000_ms_type ms_type;
- enum e1000_ms_type original_ms_type;
- enum e1000_rev_polarity cable_polarity;
- enum e1000_smart_speed smart_speed;
-
- u32 addr;
- u32 id;
- u32 reset_delay_us; /* in usec */
- u32 revision;
-
- enum e1000_media_type media_type;
-
- u16 autoneg_advertised;
- u16 autoneg_mask;
- u16 cable_length;
- u16 max_cable_length;
- u16 min_cable_length;
-
- u8 mdix;
-
- bool disable_polarity_correction;
- bool is_mdix;
- bool polarity_correction;
- bool reset_disable;
- bool speed_downgraded;
- bool autoneg_wait_to_complete;
-};
-
-struct e1000_nvm_info {
- struct e1000_nvm_operations ops;
- enum e1000_nvm_type type;
- enum e1000_nvm_override override;
-
- u32 flash_bank_size;
- u32 flash_base_addr;
-
- u16 word_size;
- u16 delay_usec;
- u16 address_bits;
- u16 opcode_bits;
- u16 page_size;
-};
-
-struct e1000_bus_info {
- enum e1000_bus_type type;
- enum e1000_bus_speed speed;
- enum e1000_bus_width width;
-
- u32 snoop;
-
- u16 func;
- u16 pci_cmd_word;
-};
-
-struct e1000_fc_info {
- u32 high_water; /* Flow control high-water mark */
- u32 low_water; /* Flow control low-water mark */
- u16 pause_time; /* Flow control pause timer */
- bool send_xon; /* Flow control send XON */
- bool strict_ieee; /* Strict IEEE mode */
- enum e1000_fc_mode current_mode; /* Type of flow control */
- enum e1000_fc_mode requested_mode;
-};
-
-struct e1000_mbx_operations {
- s32 (*init_params)(struct e1000_hw *hw);
- s32 (*read)(struct e1000_hw *, u32 *, u16, u16);
- s32 (*write)(struct e1000_hw *, u32 *, u16, u16);
- s32 (*read_posted)(struct e1000_hw *, u32 *, u16, u16);
- s32 (*write_posted)(struct e1000_hw *, u32 *, u16, u16);
- s32 (*check_for_msg)(struct e1000_hw *, u16);
- s32 (*check_for_ack)(struct e1000_hw *, u16);
- s32 (*check_for_rst)(struct e1000_hw *, u16);
-};
-
-struct e1000_mbx_stats {
- u32 msgs_tx;
- u32 msgs_rx;
-
- u32 acks;
- u32 reqs;
- u32 rsts;
-};
-
-struct e1000_mbx_info {
- struct e1000_mbx_operations ops;
- struct e1000_mbx_stats stats;
- u32 timeout;
- u32 usec_delay;
- u16 size;
-};
-
-struct e1000_dev_spec_82575 {
- bool sgmii_active;
- bool global_device_reset;
- bool eee_disable;
-};
-
-struct e1000_hw {
- void *back;
-
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
- unsigned long io_base;
-
- struct e1000_mac_info mac;
- struct e1000_fc_info fc;
- struct e1000_phy_info phy;
- struct e1000_nvm_info nvm;
- struct e1000_bus_info bus;
- struct e1000_mbx_info mbx;
- struct e1000_host_mng_dhcp_cookie mng_cookie;
-
- union {
- struct e1000_dev_spec_82575 _82575;
- } dev_spec;
-
- u16 device_id;
- u16 subsystem_vendor_id;
- u16 subsystem_device_id;
- u16 vendor_id;
-
- u8 revision_id;
-};
-
-extern struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
-#define hw_dbg(format, arg...) \
- netdev_dbg(igb_get_hw_dev(hw), format, ##arg)
-
-/* These functions must be implemented by drivers */
-s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
-s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
-#endif /* _E1000_HW_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/if_ether.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-
-#include "e1000_mac.h"
-
-#include "igb.h"
-
-static s32 igb_set_default_fc(struct e1000_hw *hw);
-static s32 igb_set_fc_watermarks(struct e1000_hw *hw);
-
-/**
- * igb_get_bus_info_pcie - Get PCIe bus information
- * @hw: pointer to the HW structure
- *
- * Determines and stores the system bus information for a particular
- * network interface. The following bus information is determined and stored:
- * bus speed, bus width, type (PCIe), and PCIe function.
- **/
-s32 igb_get_bus_info_pcie(struct e1000_hw *hw)
-{
- struct e1000_bus_info *bus = &hw->bus;
- s32 ret_val;
- u32 reg;
- u16 pcie_link_status;
-
- bus->type = e1000_bus_type_pci_express;
-
- ret_val = igb_read_pcie_cap_reg(hw,
- PCI_EXP_LNKSTA,
- &pcie_link_status);
- if (ret_val) {
- bus->width = e1000_bus_width_unknown;
- bus->speed = e1000_bus_speed_unknown;
- } else {
- switch (pcie_link_status & PCI_EXP_LNKSTA_CLS) {
- case PCI_EXP_LNKSTA_CLS_2_5GB:
- bus->speed = e1000_bus_speed_2500;
- break;
- case PCI_EXP_LNKSTA_CLS_5_0GB:
- bus->speed = e1000_bus_speed_5000;
- break;
- default:
- bus->speed = e1000_bus_speed_unknown;
- break;
- }
-
- bus->width = (enum e1000_bus_width)((pcie_link_status &
- PCI_EXP_LNKSTA_NLW) >>
- PCI_EXP_LNKSTA_NLW_SHIFT);
- }
-
- reg = rd32(E1000_STATUS);
- bus->func = (reg & E1000_STATUS_FUNC_MASK) >> E1000_STATUS_FUNC_SHIFT;
-
- return 0;
-}
-
-/**
- * igb_clear_vfta - Clear VLAN filter table
- * @hw: pointer to the HW structure
- *
- * Clears the register array which contains the VLAN filter table by
- * setting all the values to 0.
- **/
-void igb_clear_vfta(struct e1000_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
- array_wr32(E1000_VFTA, offset, 0);
- wrfl();
- }
-}
-
-/**
- * igb_write_vfta - Write value to VLAN filter table
- * @hw: pointer to the HW structure
- * @offset: register offset in VLAN filter table
- * @value: register value written to VLAN filter table
- *
- * Writes value at the given offset in the register array which stores
- * the VLAN filter table.
- **/
-static void igb_write_vfta(struct e1000_hw *hw, u32 offset, u32 value)
-{
- array_wr32(E1000_VFTA, offset, value);
- wrfl();
-}
-
-/**
- * igb_init_rx_addrs - Initialize receive address's
- * @hw: pointer to the HW structure
- * @rar_count: receive address registers
- *
- * Setups the receive address registers by setting the base receive address
- * register to the devices MAC address and clearing all the other receive
- * address registers to 0.
- **/
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count)
-{
- u32 i;
- u8 mac_addr[ETH_ALEN] = {0};
-
- /* Setup the receive address */
- hw_dbg("Programming MAC Address into RAR[0]\n");
-
- hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
- /* Zero out the other (rar_entry_count - 1) receive addresses */
- hw_dbg("Clearing RAR[1-%u]\n", rar_count-1);
- for (i = 1; i < rar_count; i++)
- hw->mac.ops.rar_set(hw, mac_addr, i);
-}
-
-/**
- * igb_vfta_set - enable or disable vlan in VLAN filter table
- * @hw: pointer to the HW structure
- * @vid: VLAN id to add or remove
- * @add: if true add filter, if false remove
- *
- * Sets or clears a bit in the VLAN filter table array based on VLAN id
- * and if we are adding or removing the filter
- **/
-s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add)
-{
- u32 index = (vid >> E1000_VFTA_ENTRY_SHIFT) & E1000_VFTA_ENTRY_MASK;
- u32 mask = 1 << (vid & E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
- u32 vfta = array_rd32(E1000_VFTA, index);
- s32 ret_val = 0;
-
- /* bit was set/cleared before we started */
- if ((!!(vfta & mask)) == add) {
- ret_val = -E1000_ERR_CONFIG;
- } else {
- if (add)
- vfta |= mask;
- else
- vfta &= ~mask;
- }
-
- igb_write_vfta(hw, index, vfta);
-
- return ret_val;
-}
-
-/**
- * igb_check_alt_mac_addr - Check for alternate MAC addr
- * @hw: pointer to the HW structure
- *
- * Checks the nvm for an alternate MAC address. An alternate MAC address
- * can be setup by pre-boot software and must be treated like a permanent
- * address and must override the actual permanent MAC address. If an
- * alternate MAC address is fopund it is saved in the hw struct and
- * prgrammed into RAR0 and the cuntion returns success, otherwise the
- * function returns an error.
- **/
-s32 igb_check_alt_mac_addr(struct e1000_hw *hw)
-{
- u32 i;
- s32 ret_val = 0;
- u16 offset, nvm_alt_mac_addr_offset, nvm_data;
- u8 alt_mac_addr[ETH_ALEN];
-
- ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1,
- &nvm_alt_mac_addr_offset);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (nvm_alt_mac_addr_offset == 0xFFFF) {
- /* There is no Alternate MAC Address */
- goto out;
- }
-
- if (hw->bus.func == E1000_FUNC_1)
- nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
- for (i = 0; i < ETH_ALEN; i += 2) {
- offset = nvm_alt_mac_addr_offset + (i >> 1);
- ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- alt_mac_addr[i] = (u8)(nvm_data & 0xFF);
- alt_mac_addr[i + 1] = (u8)(nvm_data >> 8);
- }
-
- /* if multicast bit is set, the alternate address will not be used */
- if (is_multicast_ether_addr(alt_mac_addr)) {
- hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
- goto out;
- }
-
- /*
- * We have a valid alternate MAC address, and we want to treat it the
- * same as the normal permanent MAC address stored by the HW into the
- * RAR. Do this by mapping this address into RAR0.
- */
- hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_rar_set - Set receive address register
- * @hw: pointer to the HW structure
- * @addr: pointer to the receive address
- * @index: receive address array register
- *
- * Sets the receive address array register at index to the address passed
- * in by addr.
- **/
-void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index)
-{
- u32 rar_low, rar_high;
-
- /*
- * HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] |
- ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
-
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
- /* If MAC address zero, no need to set the AV bit */
- if (rar_low || rar_high)
- rar_high |= E1000_RAH_AV;
-
- /*
- * Some bridges will combine consecutive 32-bit writes into
- * a single burst write, which will malfunction on some parts.
- * The flushes avoid this.
- */
- wr32(E1000_RAL(index), rar_low);
- wrfl();
- wr32(E1000_RAH(index), rar_high);
- wrfl();
-}
-
-/**
- * igb_mta_set - Set multicast filter table address
- * @hw: pointer to the HW structure
- * @hash_value: determines the MTA register and bit to set
- *
- * The multicast table address is a register array of 32-bit registers.
- * The hash_value is used to determine what register the bit is in, the
- * current value is read, the new bit is OR'd in and the new value is
- * written back into the register.
- **/
-void igb_mta_set(struct e1000_hw *hw, u32 hash_value)
-{
- u32 hash_bit, hash_reg, mta;
-
- /*
- * The MTA is a register array of 32-bit registers. It is
- * treated like an array of (32*mta_reg_count) bits. We want to
- * set bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The (hw->mac.mta_reg_count - 1) serves as a
- * mask to bits 31:5 of the hash value which gives us the
- * register we're modifying. The hash bit within that register
- * is determined by the lower 5 bits of the hash value.
- */
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- mta = array_rd32(E1000_MTA, hash_reg);
-
- mta |= (1 << hash_bit);
-
- array_wr32(E1000_MTA, hash_reg, mta);
- wrfl();
-}
-
-/**
- * igb_hash_mc_addr - Generate a multicast hash value
- * @hw: pointer to the HW structure
- * @mc_addr: pointer to a multicast address
- *
- * Generates a multicast address hash value which is used to determine
- * the multicast filter table array address and new table value. See
- * igb_mta_set()
- **/
-static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr)
-{
- u32 hash_value, hash_mask;
- u8 bit_shift = 0;
-
- /* Register count multiplied by bits per register */
- hash_mask = (hw->mac.mta_reg_count * 32) - 1;
-
- /*
- * For a mc_filter_type of 0, bit_shift is the number of left-shifts
- * where 0xFF would still fall within the hash mask.
- */
- while (hash_mask >> bit_shift != 0xFF)
- bit_shift++;
-
- /*
- * The portion of the address that is used for the hash table
- * is determined by the mc_filter_type setting.
- * The algorithm is such that there is a total of 8 bits of shifting.
- * The bit_shift for a mc_filter_type of 0 represents the number of
- * left-shifts where the MSB of mc_addr[5] would still fall within
- * the hash_mask. Case 0 does this exactly. Since there are a total
- * of 8 bits of shifting, then mc_addr[4] will shift right the
- * remaining number of bits. Thus 8 - bit_shift. The rest of the
- * cases are a variation of this algorithm...essentially raising the
- * number of bits to shift mc_addr[5] left, while still keeping the
- * 8-bit shifting total.
- *
- * For example, given the following Destination MAC Address and an
- * mta register count of 128 (thus a 4096-bit vector and 0xFFF mask),
- * we can see that the bit_shift for case 0 is 4. These are the hash
- * values resulting from each mc_filter_type...
- * [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB
- *
- * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563
- * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6
- * case 2: hash_value = ((0x34 >> 2) | (0x56 << 6)) & 0xFFF = 0x163
- * case 3: hash_value = ((0x34 >> 0) | (0x56 << 8)) & 0xFFF = 0x634
- */
- switch (hw->mac.mc_filter_type) {
- default:
- case 0:
- break;
- case 1:
- bit_shift += 1;
- break;
- case 2:
- bit_shift += 2;
- break;
- case 3:
- bit_shift += 4;
- break;
- }
-
- hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
- (((u16) mc_addr[5]) << bit_shift)));
-
- return hash_value;
-}
-
-/**
- * igb_update_mc_addr_list - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- *
- * Updates entire Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- **/
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count)
-{
- u32 hash_value, hash_bit, hash_reg;
- int i;
-
- /* clear mta_shadow */
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* update mta_shadow from mc_addr_list */
- for (i = 0; (u32) i < mc_addr_count; i++) {
- hash_value = igb_hash_mc_addr(hw, mc_addr_list);
-
- hash_reg = (hash_value >> 5) & (hw->mac.mta_reg_count - 1);
- hash_bit = hash_value & 0x1F;
-
- hw->mac.mta_shadow[hash_reg] |= (1 << hash_bit);
- mc_addr_list += (ETH_ALEN);
- }
-
- /* replace the entire MTA table */
- for (i = hw->mac.mta_reg_count - 1; i >= 0; i--)
- array_wr32(E1000_MTA, i, hw->mac.mta_shadow[i]);
- wrfl();
-}
-
-/**
- * igb_clear_hw_cntrs_base - Clear base hardware counters
- * @hw: pointer to the HW structure
- *
- * Clears the base hardware counters by reading the counter registers.
- **/
-void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
-{
- rd32(E1000_CRCERRS);
- rd32(E1000_SYMERRS);
- rd32(E1000_MPC);
- rd32(E1000_SCC);
- rd32(E1000_ECOL);
- rd32(E1000_MCC);
- rd32(E1000_LATECOL);
- rd32(E1000_COLC);
- rd32(E1000_DC);
- rd32(E1000_SEC);
- rd32(E1000_RLEC);
- rd32(E1000_XONRXC);
- rd32(E1000_XONTXC);
- rd32(E1000_XOFFRXC);
- rd32(E1000_XOFFTXC);
- rd32(E1000_FCRUC);
- rd32(E1000_GPRC);
- rd32(E1000_BPRC);
- rd32(E1000_MPRC);
- rd32(E1000_GPTC);
- rd32(E1000_GORCL);
- rd32(E1000_GORCH);
- rd32(E1000_GOTCL);
- rd32(E1000_GOTCH);
- rd32(E1000_RNBC);
- rd32(E1000_RUC);
- rd32(E1000_RFC);
- rd32(E1000_ROC);
- rd32(E1000_RJC);
- rd32(E1000_TORL);
- rd32(E1000_TORH);
- rd32(E1000_TOTL);
- rd32(E1000_TOTH);
- rd32(E1000_TPR);
- rd32(E1000_TPT);
- rd32(E1000_MPTC);
- rd32(E1000_BPTC);
-}
-
-/**
- * igb_check_for_copper_link - Check for link (Copper)
- * @hw: pointer to the HW structure
- *
- * Checks to see of the link status of the hardware has changed. If a
- * change in link status has been detected, then we read the PHY registers
- * to get the current speed/duplex if link exists.
- **/
-s32 igb_check_for_copper_link(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- bool link;
-
- /*
- * We only want to go out to the PHY registers to see if Auto-Neg
- * has completed and/or if our link status has changed. The
- * get_link_status flag is set upon receiving a Link Status
- * Change or Rx Sequence Error interrupt.
- */
- if (!mac->get_link_status) {
- ret_val = 0;
- goto out;
- }
-
- /*
- * First we want to see if the MII Status Register reports
- * link. If so, then we want to get the current speed/duplex
- * of the PHY.
- */
- ret_val = igb_phy_has_link(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link)
- goto out; /* No link detected */
-
- mac->get_link_status = false;
-
- /*
- * Check if there was DownShift, must be checked
- * immediately after link-up
- */
- igb_check_downshift(hw);
-
- /*
- * If we are forcing speed/duplex, then we simply return since
- * we have already determined whether we have link or not.
- */
- if (!mac->autoneg) {
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- /*
- * Auto-Neg is enabled. Auto Speed Detection takes care
- * of MAC speed/duplex configuration. So we only need to
- * configure Collision Distance in the MAC.
- */
- igb_config_collision_dist(hw);
-
- /*
- * Configure Flow Control now that Auto-Neg has completed.
- * First, we need to restore the desired flow control
- * settings because we may have had to re-autoneg with a
- * different link partner.
- */
- ret_val = igb_config_fc_after_link_up(hw);
- if (ret_val)
- hw_dbg("Error configuring flow control\n");
-
-out:
- return ret_val;
-}
-
-/**
- * igb_setup_link - Setup flow control and link settings
- * @hw: pointer to the HW structure
- *
- * Determines which flow control settings to use, then configures flow
- * control. Calls the appropriate media-specific link configuration
- * function. Assuming the adapter has a valid link partner, a valid link
- * should be established. Assumes the hardware has previously been reset
- * and the transmitter and receiver are not enabled.
- **/
-s32 igb_setup_link(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- /*
- * In the case of the phy reset being blocked, we already have a link.
- * We do not need to set it up again.
- */
- if (igb_check_reset_block(hw))
- goto out;
-
- /*
- * If requested flow control is set to default, set flow control
- * based on the EEPROM flow control settings.
- */
- if (hw->fc.requested_mode == e1000_fc_default) {
- ret_val = igb_set_default_fc(hw);
- if (ret_val)
- goto out;
- }
-
- /*
- * We want to save off the original Flow Control configuration just
- * in case we get disconnected and then reconnected into a different
- * hub or switch with different Flow Control capabilities.
- */
- hw->fc.current_mode = hw->fc.requested_mode;
-
- hw_dbg("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode);
-
- /* Call the necessary media_type subroutine to configure the link. */
- ret_val = hw->mac.ops.setup_physical_interface(hw);
- if (ret_val)
- goto out;
-
- /*
- * Initialize the flow control address, type, and PAUSE timer
- * registers to their default values. This is done even if flow
- * control is disabled, because it does not hurt anything to
- * initialize these registers.
- */
- hw_dbg("Initializing the Flow Control address, type and timer regs\n");
- wr32(E1000_FCT, FLOW_CONTROL_TYPE);
- wr32(E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
- wr32(E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
-
- wr32(E1000_FCTTV, hw->fc.pause_time);
-
- ret_val = igb_set_fc_watermarks(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_config_collision_dist - Configure collision distance
- * @hw: pointer to the HW structure
- *
- * Configures the collision distance to the default value and is used
- * during link setup. Currently no func pointer exists and all
- * implementations are handled in the generic version of this function.
- **/
-void igb_config_collision_dist(struct e1000_hw *hw)
-{
- u32 tctl;
-
- tctl = rd32(E1000_TCTL);
-
- tctl &= ~E1000_TCTL_COLD;
- tctl |= E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT;
-
- wr32(E1000_TCTL, tctl);
- wrfl();
-}
-
-/**
- * igb_set_fc_watermarks - Set flow control high/low watermarks
- * @hw: pointer to the HW structure
- *
- * Sets the flow control high/low threshold (watermark) registers. If
- * flow control XON frame transmission is enabled, then set XON frame
- * tansmission as well.
- **/
-static s32 igb_set_fc_watermarks(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u32 fcrtl = 0, fcrth = 0;
-
- /*
- * Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames is not enabled, then these
- * registers will be set to 0.
- */
- if (hw->fc.current_mode & e1000_fc_tx_pause) {
- /*
- * We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of
- * XON frames.
- */
- fcrtl = hw->fc.low_water;
- if (hw->fc.send_xon)
- fcrtl |= E1000_FCRTL_XONE;
-
- fcrth = hw->fc.high_water;
- }
- wr32(E1000_FCRTL, fcrtl);
- wr32(E1000_FCRTH, fcrth);
-
- return ret_val;
-}
-
-/**
- * igb_set_default_fc - Set flow control default values
- * @hw: pointer to the HW structure
- *
- * Read the EEPROM for the default values for flow control and store the
- * values.
- **/
-static s32 igb_set_default_fc(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 nvm_data;
-
- /*
- * Read and store word 0x0F of the EEPROM. This word contains bits
- * that determine the hardware's default PAUSE (flow control) mode,
- * a bit that determines whether the HW defaults to enabling or
- * disabling auto-negotiation, and the direction of the
- * SW defined pins. If there is no SW over-ride of the flow
- * control setting, then the variable hw->fc will
- * be initialized based on a value in the EEPROM.
- */
- ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL2_REG, 1, &nvm_data);
-
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- if ((nvm_data & NVM_WORD0F_PAUSE_MASK) == 0)
- hw->fc.requested_mode = e1000_fc_none;
- else if ((nvm_data & NVM_WORD0F_PAUSE_MASK) ==
- NVM_WORD0F_ASM_DIR)
- hw->fc.requested_mode = e1000_fc_tx_pause;
- else
- hw->fc.requested_mode = e1000_fc_full;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_force_mac_fc - Force the MAC's flow control settings
- * @hw: pointer to the HW structure
- *
- * Force the MAC's flow control settings. Sets the TFCE and RFCE bits in the
- * device control register to reflect the adapter settings. TFCE and RFCE
- * need to be explicitly set by software when a copper PHY is used because
- * autonegotiation is managed by the PHY rather than the MAC. Software must
- * also configure these bits when link is forced on a fiber connection.
- **/
-s32 igb_force_mac_fc(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 ret_val = 0;
-
- ctrl = rd32(E1000_CTRL);
-
- /*
- * Because we didn't get link via the internal auto-negotiation
- * mechanism (we either forced link or we got link via PHY
- * auto-neg), we have to manually enable/disable transmit an
- * receive flow control.
- *
- * The "Case" statement below enables/disable flow control
- * according to the "hw->fc.current_mode" parameter.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause
- * frames but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * frames but we do not receive pause frames).
- * 3: Both Rx and TX flow control (symmetric) is enabled.
- * other: No other values should be possible at this point.
- */
- hw_dbg("hw->fc.current_mode = %u\n", hw->fc.current_mode);
-
- switch (hw->fc.current_mode) {
- case e1000_fc_none:
- ctrl &= (~(E1000_CTRL_TFCE | E1000_CTRL_RFCE));
- break;
- case e1000_fc_rx_pause:
- ctrl &= (~E1000_CTRL_TFCE);
- ctrl |= E1000_CTRL_RFCE;
- break;
- case e1000_fc_tx_pause:
- ctrl &= (~E1000_CTRL_RFCE);
- ctrl |= E1000_CTRL_TFCE;
- break;
- case e1000_fc_full:
- ctrl |= (E1000_CTRL_TFCE | E1000_CTRL_RFCE);
- break;
- default:
- hw_dbg("Flow control param set incorrectly\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- wr32(E1000_CTRL, ctrl);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_config_fc_after_link_up - Configures flow control after link
- * @hw: pointer to the HW structure
- *
- * Checks the status of auto-negotiation after link up to ensure that the
- * speed and duplex were not forced. If the link needed to be forced, then
- * flow control needs to be forced also. If auto-negotiation is enabled
- * and did not fail, then we configure flow control based on our link
- * partner.
- **/
-s32 igb_config_fc_after_link_up(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val = 0;
- u16 mii_status_reg, mii_nway_adv_reg, mii_nway_lp_ability_reg;
- u16 speed, duplex;
-
- /*
- * Check for the case where we have fiber media and auto-neg failed
- * so we had to force link. In this case, we need to force the
- * configuration of the MAC to match the "fc" parameter.
- */
- if (mac->autoneg_failed) {
- if (hw->phy.media_type == e1000_media_type_internal_serdes)
- ret_val = igb_force_mac_fc(hw);
- } else {
- if (hw->phy.media_type == e1000_media_type_copper)
- ret_val = igb_force_mac_fc(hw);
- }
-
- if (ret_val) {
- hw_dbg("Error forcing flow control settings\n");
- goto out;
- }
-
- /*
- * Check for the case where we have copper media and auto-neg is
- * enabled. In this case, we need to check and see if Auto-Neg
- * has completed, and if so, how the PHY and link partner has
- * flow control configured.
- */
- if ((hw->phy.media_type == e1000_media_type_copper) && mac->autoneg) {
- /*
- * Read the MII Status Register and check to see if AutoNeg
- * has completed. We read this twice because this reg has
- * some "sticky" (latched) bits.
- */
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
- &mii_status_reg);
- if (ret_val)
- goto out;
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS,
- &mii_status_reg);
- if (ret_val)
- goto out;
-
- if (!(mii_status_reg & MII_SR_AUTONEG_COMPLETE)) {
- hw_dbg("Copper PHY and Auto Neg "
- "has not completed.\n");
- goto out;
- }
-
- /*
- * The AutoNeg process has completed, so we now need to
- * read both the Auto Negotiation Advertisement
- * Register (Address 4) and the Auto_Negotiation Base
- * Page Ability Register (Address 5) to determine how
- * flow control was negotiated.
- */
- ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV,
- &mii_nway_adv_reg);
- if (ret_val)
- goto out;
- ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY,
- &mii_nway_lp_ability_reg);
- if (ret_val)
- goto out;
-
- /*
- * Two bits in the Auto Negotiation Advertisement Register
- * (Address 4) and two bits in the Auto Negotiation Base
- * Page Ability Register (Address 5) determine flow control
- * for both the PHY and the link partner. The following
- * table, taken out of the IEEE 802.3ab/D6.0 dated March 25,
- * 1999, describes these PAUSE resolution bits and how flow
- * control is determined based upon these settings.
- * NOTE: DC = Don't Care
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | NIC Resolution
- *-------|---------|-------|---------|--------------------
- * 0 | 0 | DC | DC | e1000_fc_none
- * 0 | 1 | 0 | DC | e1000_fc_none
- * 0 | 1 | 1 | 0 | e1000_fc_none
- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
- * 1 | 0 | 0 | DC | e1000_fc_none
- * 1 | DC | 1 | DC | e1000_fc_full
- * 1 | 1 | 0 | 0 | e1000_fc_none
- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
- *
- * Are both PAUSE bits set to 1? If so, this implies
- * Symmetric Flow Control is enabled at both ends. The
- * ASM_DIR bits are irrelevant per the spec.
- *
- * For Symmetric Flow Control:
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | DC | 1 | DC | E1000_fc_full
- *
- */
- if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE)) {
- /*
- * Now we need to check if the user selected RX ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
- */
- if (hw->fc.requested_mode == e1000_fc_full) {
- hw->fc.current_mode = e1000_fc_full;
- hw_dbg("Flow Control = FULL.\r\n");
- } else {
- hw->fc.current_mode = e1000_fc_rx_pause;
- hw_dbg("Flow Control = "
- "RX PAUSE frames only.\r\n");
- }
- }
- /*
- * For receiving PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 0 | 1 | 1 | 1 | e1000_fc_tx_pause
- */
- else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.current_mode = e1000_fc_tx_pause;
- hw_dbg("Flow Control = TX PAUSE frames only.\r\n");
- }
- /*
- * For transmitting PAUSE frames ONLY.
- *
- * LOCAL DEVICE | LINK PARTNER
- * PAUSE | ASM_DIR | PAUSE | ASM_DIR | Result
- *-------|---------|-------|---------|--------------------
- * 1 | 1 | 0 | 1 | e1000_fc_rx_pause
- */
- else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) &&
- (mii_nway_adv_reg & NWAY_AR_ASM_DIR) &&
- !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) &&
- (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) {
- hw->fc.current_mode = e1000_fc_rx_pause;
- hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
- }
- /*
- * Per the IEEE spec, at this point flow control should be
- * disabled. However, we want to consider that we could
- * be connected to a legacy switch that doesn't advertise
- * desired flow control, but can be forced on the link
- * partner. So if we advertised no flow control, that is
- * what we will resolve to. If we advertised some kind of
- * receive capability (Rx Pause Only or Full Flow Control)
- * and the link partner advertised none, we will configure
- * ourselves to enable Rx Flow Control only. We can do
- * this safely for two reasons: If the link partner really
- * didn't want flow control enabled, and we enable Rx, no
- * harm done since we won't be receiving any PAUSE frames
- * anyway. If the intent on the link partner was to have
- * flow control enabled, then by us enabling RX only, we
- * can at least receive pause frames and process them.
- * This is a good idea because in most cases, since we are
- * predominantly a server NIC, more times than not we will
- * be asked to delay transmission of packets than asking
- * our link partner to pause transmission of frames.
- */
- else if ((hw->fc.requested_mode == e1000_fc_none ||
- hw->fc.requested_mode == e1000_fc_tx_pause) ||
- hw->fc.strict_ieee) {
- hw->fc.current_mode = e1000_fc_none;
- hw_dbg("Flow Control = NONE.\r\n");
- } else {
- hw->fc.current_mode = e1000_fc_rx_pause;
- hw_dbg("Flow Control = RX PAUSE frames only.\r\n");
- }
-
- /*
- * Now we need to do one last check... If we auto-
- * negotiated to HALF DUPLEX, flow control should not be
- * enabled per IEEE 802.3 spec.
- */
- ret_val = hw->mac.ops.get_speed_and_duplex(hw, &speed, &duplex);
- if (ret_val) {
- hw_dbg("Error getting link speed and duplex\n");
- goto out;
- }
-
- if (duplex == HALF_DUPLEX)
- hw->fc.current_mode = e1000_fc_none;
-
- /*
- * Now we call a subroutine to actually force the MAC
- * controller to use the correct flow control settings.
- */
- ret_val = igb_force_mac_fc(hw);
- if (ret_val) {
- hw_dbg("Error forcing flow control settings\n");
- goto out;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_speed_and_duplex_copper - Retrieve current speed/duplex
- * @hw: pointer to the HW structure
- * @speed: stores the current speed
- * @duplex: stores the current duplex
- *
- * Read the status register for the current speed/duplex and store the current
- * speed and duplex for copper connections.
- **/
-s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
-{
- u32 status;
-
- status = rd32(E1000_STATUS);
- if (status & E1000_STATUS_SPEED_1000) {
- *speed = SPEED_1000;
- hw_dbg("1000 Mbs, ");
- } else if (status & E1000_STATUS_SPEED_100) {
- *speed = SPEED_100;
- hw_dbg("100 Mbs, ");
- } else {
- *speed = SPEED_10;
- hw_dbg("10 Mbs, ");
- }
-
- if (status & E1000_STATUS_FD) {
- *duplex = FULL_DUPLEX;
- hw_dbg("Full Duplex\n");
- } else {
- *duplex = HALF_DUPLEX;
- hw_dbg("Half Duplex\n");
- }
-
- return 0;
-}
-
-/**
- * igb_get_hw_semaphore - Acquire hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Acquire the HW semaphore to access the PHY or NVM
- **/
-s32 igb_get_hw_semaphore(struct e1000_hw *hw)
-{
- u32 swsm;
- s32 ret_val = 0;
- s32 timeout = hw->nvm.word_size + 1;
- s32 i = 0;
-
- /* Get the SW semaphore */
- while (i < timeout) {
- swsm = rd32(E1000_SWSM);
- if (!(swsm & E1000_SWSM_SMBI))
- break;
-
- udelay(50);
- i++;
- }
-
- if (i == timeout) {
- hw_dbg("Driver can't access device - SMBI bit is set.\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
- /* Get the FW semaphore. */
- for (i = 0; i < timeout; i++) {
- swsm = rd32(E1000_SWSM);
- wr32(E1000_SWSM, swsm | E1000_SWSM_SWESMBI);
-
- /* Semaphore acquired if bit latched */
- if (rd32(E1000_SWSM) & E1000_SWSM_SWESMBI)
- break;
-
- udelay(50);
- }
-
- if (i == timeout) {
- /* Release semaphores */
- igb_put_hw_semaphore(hw);
- hw_dbg("Driver can't access the NVM\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_put_hw_semaphore - Release hardware semaphore
- * @hw: pointer to the HW structure
- *
- * Release hardware semaphore used to access the PHY or NVM
- **/
-void igb_put_hw_semaphore(struct e1000_hw *hw)
-{
- u32 swsm;
-
- swsm = rd32(E1000_SWSM);
-
- swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
-
- wr32(E1000_SWSM, swsm);
-}
-
-/**
- * igb_get_auto_rd_done - Check for auto read completion
- * @hw: pointer to the HW structure
- *
- * Check EEPROM for Auto Read done bit.
- **/
-s32 igb_get_auto_rd_done(struct e1000_hw *hw)
-{
- s32 i = 0;
- s32 ret_val = 0;
-
-
- while (i < AUTO_READ_DONE_TIMEOUT) {
- if (rd32(E1000_EECD) & E1000_EECD_AUTO_RD)
- break;
- msleep(1);
- i++;
- }
-
- if (i == AUTO_READ_DONE_TIMEOUT) {
- hw_dbg("Auto read by HW from NVM has not completed.\n");
- ret_val = -E1000_ERR_RESET;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_valid_led_default - Verify a valid default LED config
- * @hw: pointer to the HW structure
- * @data: pointer to the NVM (EEPROM)
- *
- * Read the EEPROM for the current default LED configuration. If the
- * LED configuration is not valid, set to a valid LED configuration.
- **/
-static s32 igb_valid_led_default(struct e1000_hw *hw, u16 *data)
-{
- s32 ret_val;
-
- ret_val = hw->nvm.ops.read(hw, NVM_ID_LED_SETTINGS, 1, data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (*data == ID_LED_RESERVED_0000 || *data == ID_LED_RESERVED_FFFF) {
- switch(hw->phy.media_type) {
- case e1000_media_type_internal_serdes:
- *data = ID_LED_DEFAULT_82575_SERDES;
- break;
- case e1000_media_type_copper:
- default:
- *data = ID_LED_DEFAULT;
- break;
- }
- }
-out:
- return ret_val;
-}
-
-/**
- * igb_id_led_init -
- * @hw: pointer to the HW structure
- *
- **/
-s32 igb_id_led_init(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val;
- const u32 ledctl_mask = 0x000000FF;
- const u32 ledctl_on = E1000_LEDCTL_MODE_LED_ON;
- const u32 ledctl_off = E1000_LEDCTL_MODE_LED_OFF;
- u16 data, i, temp;
- const u16 led_mask = 0x0F;
-
- ret_val = igb_valid_led_default(hw, &data);
- if (ret_val)
- goto out;
-
- mac->ledctl_default = rd32(E1000_LEDCTL);
- mac->ledctl_mode1 = mac->ledctl_default;
- mac->ledctl_mode2 = mac->ledctl_default;
-
- for (i = 0; i < 4; i++) {
- temp = (data >> (i << 2)) & led_mask;
- switch (temp) {
- case ID_LED_ON1_DEF2:
- case ID_LED_ON1_ON2:
- case ID_LED_ON1_OFF2:
- mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode1 |= ledctl_on << (i << 3);
- break;
- case ID_LED_OFF1_DEF2:
- case ID_LED_OFF1_ON2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode1 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode1 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- switch (temp) {
- case ID_LED_DEF1_ON2:
- case ID_LED_ON1_ON2:
- case ID_LED_OFF1_ON2:
- mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode2 |= ledctl_on << (i << 3);
- break;
- case ID_LED_DEF1_OFF2:
- case ID_LED_ON1_OFF2:
- case ID_LED_OFF1_OFF2:
- mac->ledctl_mode2 &= ~(ledctl_mask << (i << 3));
- mac->ledctl_mode2 |= ledctl_off << (i << 3);
- break;
- default:
- /* Do nothing */
- break;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_cleanup_led - Set LED config to default operation
- * @hw: pointer to the HW structure
- *
- * Remove the current LED configuration and set the LED configuration
- * to the default value, saved from the EEPROM.
- **/
-s32 igb_cleanup_led(struct e1000_hw *hw)
-{
- wr32(E1000_LEDCTL, hw->mac.ledctl_default);
- return 0;
-}
-
-/**
- * igb_blink_led - Blink LED
- * @hw: pointer to the HW structure
- *
- * Blink the led's which are set to be on.
- **/
-s32 igb_blink_led(struct e1000_hw *hw)
-{
- u32 ledctl_blink = 0;
- u32 i;
-
- /*
- * set the blink bit for each LED that's "on" (0x0E)
- * in ledctl_mode2
- */
- ledctl_blink = hw->mac.ledctl_mode2;
- for (i = 0; i < 4; i++)
- if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
- E1000_LEDCTL_MODE_LED_ON)
- ledctl_blink |= (E1000_LEDCTL_LED0_BLINK <<
- (i * 8));
-
- wr32(E1000_LEDCTL, ledctl_blink);
-
- return 0;
-}
-
-/**
- * igb_led_off - Turn LED off
- * @hw: pointer to the HW structure
- *
- * Turn LED off.
- **/
-s32 igb_led_off(struct e1000_hw *hw)
-{
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- wr32(E1000_LEDCTL, hw->mac.ledctl_mode1);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
-/**
- * igb_disable_pcie_master - Disables PCI-express master access
- * @hw: pointer to the HW structure
- *
- * Returns 0 (0) if successful, else returns -10
- * (-E1000_ERR_MASTER_REQUESTS_PENDING) if master disable bit has not casued
- * the master requests to be disabled.
- *
- * Disables PCI-Express master access and verifies there are no pending
- * requests.
- **/
-s32 igb_disable_pcie_master(struct e1000_hw *hw)
-{
- u32 ctrl;
- s32 timeout = MASTER_DISABLE_TIMEOUT;
- s32 ret_val = 0;
-
- if (hw->bus.type != e1000_bus_type_pci_express)
- goto out;
-
- ctrl = rd32(E1000_CTRL);
- ctrl |= E1000_CTRL_GIO_MASTER_DISABLE;
- wr32(E1000_CTRL, ctrl);
-
- while (timeout) {
- if (!(rd32(E1000_STATUS) &
- E1000_STATUS_GIO_MASTER_ENABLE))
- break;
- udelay(100);
- timeout--;
- }
-
- if (!timeout) {
- hw_dbg("Master requests are pending.\n");
- ret_val = -E1000_ERR_MASTER_REQUESTS_PENDING;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_validate_mdi_setting - Verify MDI/MDIx settings
- * @hw: pointer to the HW structure
- *
- * Verify that when not using auto-negotitation that MDI/MDIx is correctly
- * set, which is forced to MDI mode only.
- **/
-s32 igb_validate_mdi_setting(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- if (!hw->mac.autoneg && (hw->phy.mdix == 0 || hw->phy.mdix == 3)) {
- hw_dbg("Invalid MDI setting detected\n");
- hw->phy.mdix = 1;
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_8bit_ctrl_reg - Write a 8bit CTRL register
- * @hw: pointer to the HW structure
- * @reg: 32bit register offset such as E1000_SCTL
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes an address/data control type register. There are several of these
- * and they all have the format address << 8 | data and bit 31 is polled for
- * completion.
- **/
-s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
- u32 offset, u8 data)
-{
- u32 i, regvalue = 0;
- s32 ret_val = 0;
-
- /* Set up the address and data */
- regvalue = ((u32)data) | (offset << E1000_GEN_CTL_ADDRESS_SHIFT);
- wr32(reg, regvalue);
-
- /* Poll the ready bit to see if the MDI read completed */
- for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
- udelay(5);
- regvalue = rd32(reg);
- if (regvalue & E1000_GEN_CTL_READY)
- break;
- }
- if (!(regvalue & E1000_GEN_CTL_READY)) {
- hw_dbg("Reg %08x did not indicate ready\n", reg);
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_enable_mng_pass_thru - Enable processing of ARP's
- * @hw: pointer to the HW structure
- *
- * Verifies the hardware needs to leave interface enabled so that frames can
- * be directed to and from the management interface.
- **/
-bool igb_enable_mng_pass_thru(struct e1000_hw *hw)
-{
- u32 manc;
- u32 fwsm, factps;
- bool ret_val = false;
-
- if (!hw->mac.asf_firmware_present)
- goto out;
-
- manc = rd32(E1000_MANC);
-
- if (!(manc & E1000_MANC_RCV_TCO_EN))
- goto out;
-
- if (hw->mac.arc_subsystem_valid) {
- fwsm = rd32(E1000_FWSM);
- factps = rd32(E1000_FACTPS);
-
- if (!(factps & E1000_FACTPS_MNGCG) &&
- ((fwsm & E1000_FWSM_MODE_MASK) ==
- (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT))) {
- ret_val = true;
- goto out;
- }
- } else {
- if ((manc & E1000_MANC_SMBUS_EN) &&
- !(manc & E1000_MANC_ASF_EN)) {
- ret_val = true;
- goto out;
- }
- }
-
-out:
- return ret_val;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MAC_H_
-#define _E1000_MAC_H_
-
-#include "e1000_hw.h"
-
-#include "e1000_phy.h"
-#include "e1000_nvm.h"
-#include "e1000_defines.h"
-
-/*
- * Functions that should not be called directly from drivers but can be used
- * by other files in this 'shared code'
- */
-s32 igb_blink_led(struct e1000_hw *hw);
-s32 igb_check_for_copper_link(struct e1000_hw *hw);
-s32 igb_cleanup_led(struct e1000_hw *hw);
-s32 igb_config_fc_after_link_up(struct e1000_hw *hw);
-s32 igb_disable_pcie_master(struct e1000_hw *hw);
-s32 igb_force_mac_fc(struct e1000_hw *hw);
-s32 igb_get_auto_rd_done(struct e1000_hw *hw);
-s32 igb_get_bus_info_pcie(struct e1000_hw *hw);
-s32 igb_get_hw_semaphore(struct e1000_hw *hw);
-s32 igb_get_speed_and_duplex_copper(struct e1000_hw *hw, u16 *speed,
- u16 *duplex);
-s32 igb_id_led_init(struct e1000_hw *hw);
-s32 igb_led_off(struct e1000_hw *hw);
-void igb_update_mc_addr_list(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count);
-s32 igb_setup_link(struct e1000_hw *hw);
-s32 igb_validate_mdi_setting(struct e1000_hw *hw);
-s32 igb_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg,
- u32 offset, u8 data);
-
-void igb_clear_hw_cntrs_base(struct e1000_hw *hw);
-void igb_clear_vfta(struct e1000_hw *hw);
-s32 igb_vfta_set(struct e1000_hw *hw, u32 vid, bool add);
-void igb_config_collision_dist(struct e1000_hw *hw);
-void igb_init_rx_addrs(struct e1000_hw *hw, u16 rar_count);
-void igb_mta_set(struct e1000_hw *hw, u32 hash_value);
-void igb_put_hw_semaphore(struct e1000_hw *hw);
-void igb_rar_set(struct e1000_hw *hw, u8 *addr, u32 index);
-s32 igb_check_alt_mac_addr(struct e1000_hw *hw);
-
-bool igb_enable_mng_pass_thru(struct e1000_hw *hw);
-
-enum e1000_mng_mode {
- e1000_mng_mode_none = 0,
- e1000_mng_mode_asf,
- e1000_mng_mode_pt,
- e1000_mng_mode_ipmi,
- e1000_mng_mode_host_if_only
-};
-
-#define E1000_FACTPS_MNGCG 0x20000000
-
-#define E1000_FWSM_MODE_MASK 0xE
-#define E1000_FWSM_MODE_SHIFT 1
-
-#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2
-
-extern void e1000_init_function_pointers_82575(struct e1000_hw *hw);
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "e1000_mbx.h"
-
-/**
- * igb_read_mbx - Reads a message from the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to read
- *
- * returns SUCCESS if it successfuly read message from buffer
- **/
-s32 igb_read_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- /* limit read to size of mailbox */
- if (size > mbx->size)
- size = mbx->size;
-
- if (mbx->ops.read)
- ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-
- return ret_val;
-}
-
-/**
- * igb_write_mbx - Write a message to the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully copied message into the buffer
- **/
-s32 igb_write_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = 0;
-
- if (size > mbx->size)
- ret_val = -E1000_ERR_MBX;
-
- else if (mbx->ops.write)
- ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
- return ret_val;
-}
-
-/**
- * igb_check_for_msg - checks to see if someone sent us mail
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 igb_check_for_msg(struct e1000_hw *hw, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- if (mbx->ops.check_for_msg)
- ret_val = mbx->ops.check_for_msg(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * igb_check_for_ack - checks to see if someone sent us ACK
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 igb_check_for_ack(struct e1000_hw *hw, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- if (mbx->ops.check_for_ack)
- ret_val = mbx->ops.check_for_ack(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * igb_check_for_rst - checks to see if other side has reset
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 igb_check_for_rst(struct e1000_hw *hw, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- if (mbx->ops.check_for_rst)
- ret_val = mbx->ops.check_for_rst(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * igb_poll_for_msg - Wait for message notification
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message notification
- **/
-static s32 igb_poll_for_msg(struct e1000_hw *hw, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!countdown || !mbx->ops.check_for_msg)
- goto out;
-
- while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
- countdown--;
- if (!countdown)
- break;
- udelay(mbx->usec_delay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-out:
- return countdown ? 0 : -E1000_ERR_MBX;
-}
-
-/**
- * igb_poll_for_ack - Wait for message acknowledgement
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message acknowledgement
- **/
-static s32 igb_poll_for_ack(struct e1000_hw *hw, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!countdown || !mbx->ops.check_for_ack)
- goto out;
-
- while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
- countdown--;
- if (!countdown)
- break;
- udelay(mbx->usec_delay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-out:
- return countdown ? 0 : -E1000_ERR_MBX;
-}
-
-/**
- * igb_read_posted_mbx - Wait for message notification and receive message
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message notification and
- * copied it into the receive buffer.
- **/
-static s32 igb_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!mbx->ops.read)
- goto out;
-
- ret_val = igb_poll_for_msg(hw, mbx_id);
-
- if (!ret_val)
- ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-out:
- return ret_val;
-}
-
-/**
- * igb_write_posted_mbx - Write a message to the mailbox, wait for ack
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully copied message into the buffer and
- * received an ack to that message within delay * timeout period
- **/
-static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- /* exit if either we can't write or there isn't a defined timeout */
- if (!mbx->ops.write || !mbx->timeout)
- goto out;
-
- /* send msg */
- ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
- /* if msg sent wait until we receive an ack */
- if (!ret_val)
- ret_val = igb_poll_for_ack(hw, mbx_id);
-out:
- return ret_val;
-}
-
-static s32 igb_check_for_bit_pf(struct e1000_hw *hw, u32 mask)
-{
- u32 mbvficr = rd32(E1000_MBVFICR);
- s32 ret_val = -E1000_ERR_MBX;
-
- if (mbvficr & mask) {
- ret_val = 0;
- wr32(E1000_MBVFICR, mask);
- }
-
- return ret_val;
-}
-
-/**
- * igb_check_for_msg_pf - checks to see if the VF has sent mail
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 igb_check_for_msg_pf(struct e1000_hw *hw, u16 vf_number)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFREQ_VF1 << vf_number)) {
- ret_val = 0;
- hw->mbx.stats.reqs++;
- }
-
- return ret_val;
-}
-
-/**
- * igb_check_for_ack_pf - checks to see if the VF has ACKed
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 igb_check_for_ack_pf(struct e1000_hw *hw, u16 vf_number)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!igb_check_for_bit_pf(hw, E1000_MBVFICR_VFACK_VF1 << vf_number)) {
- ret_val = 0;
- hw->mbx.stats.acks++;
- }
-
- return ret_val;
-}
-
-/**
- * igb_check_for_rst_pf - checks to see if the VF has reset
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 igb_check_for_rst_pf(struct e1000_hw *hw, u16 vf_number)
-{
- u32 vflre = rd32(E1000_VFLRE);
- s32 ret_val = -E1000_ERR_MBX;
-
- if (vflre & (1 << vf_number)) {
- ret_val = 0;
- wr32(E1000_VFLRE, (1 << vf_number));
- hw->mbx.stats.rsts++;
- }
-
- return ret_val;
-}
-
-/**
- * igb_obtain_mbx_lock_pf - obtain mailbox lock
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * return SUCCESS if we obtained the mailbox lock
- **/
-static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
-{
- s32 ret_val = -E1000_ERR_MBX;
- u32 p2v_mailbox;
-
-
- /* Take ownership of the buffer */
- wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
- /* reserve mailbox for vf use */
- p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
- if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
- ret_val = 0;
-
- return ret_val;
-}
-
-/**
- * igb_write_mbx_pf - Places a message in the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @vf_number: the VF index
- *
- * returns SUCCESS if it successfully copied message into the buffer
- **/
-static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
- u16 vf_number)
-{
- s32 ret_val;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
- if (ret_val)
- goto out_no_write;
-
- /* flush msg and acks as we are overwriting the message buffer */
- igb_check_for_msg_pf(hw, vf_number);
- igb_check_for_ack_pf(hw, vf_number);
-
- /* copy the caller specified message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- array_wr32(E1000_VMBMEM(vf_number), i, msg[i]);
-
- /* Interrupt VF to tell it a message has been sent and release buffer*/
- wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_STS);
-
- /* update stats */
- hw->mbx.stats.msgs_tx++;
-
-out_no_write:
- return ret_val;
-
-}
-
-/**
- * igb_read_mbx_pf - Read a message from the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @vf_number: the VF index
- *
- * This function copies a message from the mailbox buffer to the caller's
- * memory buffer. The presumption is that the caller knows that there was
- * a message due to a VF request so no polling for message is needed.
- **/
-static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
- u16 vf_number)
-{
- s32 ret_val;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
- if (ret_val)
- goto out_no_read;
-
- /* copy the message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- msg[i] = array_rd32(E1000_VMBMEM(vf_number), i);
-
- /* Acknowledge the message and release buffer */
- wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_ACK);
-
- /* update stats */
- hw->mbx.stats.msgs_rx++;
-
-out_no_read:
- return ret_val;
-}
-
-/**
- * e1000_init_mbx_params_pf - set initial values for pf mailbox
- * @hw: pointer to the HW structure
- *
- * Initializes the hw->mbx struct to correct values for pf mailbox
- */
-s32 igb_init_mbx_params_pf(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
-
- mbx->timeout = 0;
- mbx->usec_delay = 0;
-
- mbx->size = E1000_VFMAILBOX_SIZE;
-
- mbx->ops.read = igb_read_mbx_pf;
- mbx->ops.write = igb_write_mbx_pf;
- mbx->ops.read_posted = igb_read_posted_mbx;
- mbx->ops.write_posted = igb_write_posted_mbx;
- mbx->ops.check_for_msg = igb_check_for_msg_pf;
- mbx->ops.check_for_ack = igb_check_for_ack_pf;
- mbx->ops.check_for_rst = igb_check_for_rst_pf;
-
- mbx->stats.msgs_tx = 0;
- mbx->stats.msgs_rx = 0;
- mbx->stats.reqs = 0;
- mbx->stats.acks = 0;
- mbx->stats.rsts = 0;
-
- return 0;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MBX_H_
-#define _E1000_MBX_H_
-
-#include "e1000_hw.h"
-
-#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */
-#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
-#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
-
-#define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */
-#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
-#define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */
-#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
-
-#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
-
-/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
- * PF. The reverse is true if it is E1000_PF_*.
- * Message ACK's are the value or'd with 0xF0000000
- */
-#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
- * this are the ACK */
-#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
- * this are the NACK */
-#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
- clear to send requests */
-#define E1000_VT_MSGINFO_SHIFT 16
-/* bits 23:16 are used for exra info for certain messages */
-#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
-
-#define E1000_VF_RESET 0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */
-#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */
-#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */
-#define E1000_VF_SET_LPE 0x05 /* VF requests to set VMOLR.LPE */
-#define E1000_VF_SET_PROMISC 0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
-#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT)
-
-#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
-
-s32 igb_read_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_write_mbx(struct e1000_hw *, u32 *, u16, u16);
-s32 igb_check_for_msg(struct e1000_hw *, u16);
-s32 igb_check_for_ack(struct e1000_hw *, u16);
-s32 igb_check_for_rst(struct e1000_hw *, u16);
-s32 igb_init_mbx_params_pf(struct e1000_hw *);
-
-#endif /* _E1000_MBX_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/if_ether.h>
-#include <linux/delay.h>
-
-#include "e1000_mac.h"
-#include "e1000_nvm.h"
-
-/**
- * igb_raise_eec_clk - Raise EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Enable/Raise the EEPROM clock bit.
- **/
-static void igb_raise_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd | E1000_EECD_SK;
- wr32(E1000_EECD, *eecd);
- wrfl();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * igb_lower_eec_clk - Lower EEPROM clock
- * @hw: pointer to the HW structure
- * @eecd: pointer to the EEPROM
- *
- * Clear/Lower the EEPROM clock bit.
- **/
-static void igb_lower_eec_clk(struct e1000_hw *hw, u32 *eecd)
-{
- *eecd = *eecd & ~E1000_EECD_SK;
- wr32(E1000_EECD, *eecd);
- wrfl();
- udelay(hw->nvm.delay_usec);
-}
-
-/**
- * igb_shift_out_eec_bits - Shift data bits our to the EEPROM
- * @hw: pointer to the HW structure
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
- *
- * We need to shift 'count' bits out to the EEPROM. So, the value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- **/
-static void igb_shift_out_eec_bits(struct e1000_hw *hw, u16 data, u16 count)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = rd32(E1000_EECD);
- u32 mask;
-
- mask = 0x01 << (count - 1);
- if (nvm->type == e1000_nvm_eeprom_spi)
- eecd |= E1000_EECD_DO;
-
- do {
- eecd &= ~E1000_EECD_DI;
-
- if (data & mask)
- eecd |= E1000_EECD_DI;
-
- wr32(E1000_EECD, eecd);
- wrfl();
-
- udelay(nvm->delay_usec);
-
- igb_raise_eec_clk(hw, &eecd);
- igb_lower_eec_clk(hw, &eecd);
-
- mask >>= 1;
- } while (mask);
-
- eecd &= ~E1000_EECD_DI;
- wr32(E1000_EECD, eecd);
-}
-
-/**
- * igb_shift_in_eec_bits - Shift data bits in from the EEPROM
- * @hw: pointer to the HW structure
- * @count: number of bits to shift in
- *
- * In order to read a register from the EEPROM, we need to shift 'count' bits
- * in from the EEPROM. Bits are "shifted in" by raising the clock input to
- * the EEPROM (setting the SK bit), and then reading the value of the data out
- * "DO" bit. During this "shifting in" process the data in "DI" bit should
- * always be clear.
- **/
-static u16 igb_shift_in_eec_bits(struct e1000_hw *hw, u16 count)
-{
- u32 eecd;
- u32 i;
- u16 data;
-
- eecd = rd32(E1000_EECD);
-
- eecd &= ~(E1000_EECD_DO | E1000_EECD_DI);
- data = 0;
-
- for (i = 0; i < count; i++) {
- data <<= 1;
- igb_raise_eec_clk(hw, &eecd);
-
- eecd = rd32(E1000_EECD);
-
- eecd &= ~E1000_EECD_DI;
- if (eecd & E1000_EECD_DO)
- data |= 1;
-
- igb_lower_eec_clk(hw, &eecd);
- }
-
- return data;
-}
-
-/**
- * igb_poll_eerd_eewr_done - Poll for EEPROM read/write completion
- * @hw: pointer to the HW structure
- * @ee_reg: EEPROM flag for polling
- *
- * Polls the EEPROM status bit for either read or write completion based
- * upon the value of 'ee_reg'.
- **/
-static s32 igb_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg)
-{
- u32 attempts = 100000;
- u32 i, reg = 0;
- s32 ret_val = -E1000_ERR_NVM;
-
- for (i = 0; i < attempts; i++) {
- if (ee_reg == E1000_NVM_POLL_READ)
- reg = rd32(E1000_EERD);
- else
- reg = rd32(E1000_EEWR);
-
- if (reg & E1000_NVM_RW_REG_DONE) {
- ret_val = 0;
- break;
- }
-
- udelay(5);
- }
-
- return ret_val;
-}
-
-/**
- * igb_acquire_nvm - Generic request for access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Set the EEPROM access request bit and wait for EEPROM access grant bit.
- * Return successful if access grant bit set, else clear the request for
- * EEPROM access and return -E1000_ERR_NVM (-1).
- **/
-s32 igb_acquire_nvm(struct e1000_hw *hw)
-{
- u32 eecd = rd32(E1000_EECD);
- s32 timeout = E1000_NVM_GRANT_ATTEMPTS;
- s32 ret_val = 0;
-
-
- wr32(E1000_EECD, eecd | E1000_EECD_REQ);
- eecd = rd32(E1000_EECD);
-
- while (timeout) {
- if (eecd & E1000_EECD_GNT)
- break;
- udelay(5);
- eecd = rd32(E1000_EECD);
- timeout--;
- }
-
- if (!timeout) {
- eecd &= ~E1000_EECD_REQ;
- wr32(E1000_EECD, eecd);
- hw_dbg("Could not acquire NVM grant\n");
- ret_val = -E1000_ERR_NVM;
- }
-
- return ret_val;
-}
-
-/**
- * igb_standby_nvm - Return EEPROM to standby state
- * @hw: pointer to the HW structure
- *
- * Return the EEPROM to a standby state.
- **/
-static void igb_standby_nvm(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = rd32(E1000_EECD);
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- /* Toggle CS to flush commands */
- eecd |= E1000_EECD_CS;
- wr32(E1000_EECD, eecd);
- wrfl();
- udelay(nvm->delay_usec);
- eecd &= ~E1000_EECD_CS;
- wr32(E1000_EECD, eecd);
- wrfl();
- udelay(nvm->delay_usec);
- }
-}
-
-/**
- * e1000_stop_nvm - Terminate EEPROM command
- * @hw: pointer to the HW structure
- *
- * Terminates the current command by inverting the EEPROM's chip select pin.
- **/
-static void e1000_stop_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- eecd = rd32(E1000_EECD);
- if (hw->nvm.type == e1000_nvm_eeprom_spi) {
- /* Pull CS high */
- eecd |= E1000_EECD_CS;
- igb_lower_eec_clk(hw, &eecd);
- }
-}
-
-/**
- * igb_release_nvm - Release exclusive access to EEPROM
- * @hw: pointer to the HW structure
- *
- * Stop any current commands to the EEPROM and clear the EEPROM request bit.
- **/
-void igb_release_nvm(struct e1000_hw *hw)
-{
- u32 eecd;
-
- e1000_stop_nvm(hw);
-
- eecd = rd32(E1000_EECD);
- eecd &= ~E1000_EECD_REQ;
- wr32(E1000_EECD, eecd);
-}
-
-/**
- * igb_ready_nvm_eeprom - Prepares EEPROM for read/write
- * @hw: pointer to the HW structure
- *
- * Setups the EEPROM for reading and writing.
- **/
-static s32 igb_ready_nvm_eeprom(struct e1000_hw *hw)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 eecd = rd32(E1000_EECD);
- s32 ret_val = 0;
- u16 timeout = 0;
- u8 spi_stat_reg;
-
-
- if (nvm->type == e1000_nvm_eeprom_spi) {
- /* Clear SK and CS */
- eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
- wr32(E1000_EECD, eecd);
- wrfl();
- udelay(1);
- timeout = NVM_MAX_RETRY_SPI;
-
- /*
- * Read "Status Register" repeatedly until the LSB is cleared.
- * The EEPROM will signal that the command has been completed
- * by clearing bit 0 of the internal status register. If it's
- * not cleared within 'timeout', then error out.
- */
- while (timeout) {
- igb_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI,
- hw->nvm.opcode_bits);
- spi_stat_reg = (u8)igb_shift_in_eec_bits(hw, 8);
- if (!(spi_stat_reg & NVM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- igb_standby_nvm(hw);
- timeout--;
- }
-
- if (!timeout) {
- hw_dbg("SPI NVM Status error\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_nvm_spi - Read EEPROM's using SPI
- * @hw: pointer to the HW structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM.
- **/
-s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i = 0;
- s32 ret_val;
- u16 word_in;
- u8 read_opcode = NVM_READ_OPCODE_SPI;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- hw_dbg("nvm parameter(s) out of bounds\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
- ret_val = nvm->ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ret_val = igb_ready_nvm_eeprom(hw);
- if (ret_val)
- goto release;
-
- igb_standby_nvm(hw);
-
- if ((nvm->address_bits == 8) && (offset >= 128))
- read_opcode |= NVM_A8_OPCODE_SPI;
-
- /* Send the READ command (opcode + addr) */
- igb_shift_out_eec_bits(hw, read_opcode, nvm->opcode_bits);
- igb_shift_out_eec_bits(hw, (u16)(offset*2), nvm->address_bits);
-
- /*
- * Read the data. SPI NVMs increment the address with each byte
- * read and will roll over if reading beyond the end. This allows
- * us to read the whole NVM from any offset
- */
- for (i = 0; i < words; i++) {
- word_in = igb_shift_in_eec_bits(hw, 16);
- data[i] = (word_in >> 8) | (word_in << 8);
- }
-
-release:
- nvm->ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_nvm_eerd - Reads EEPROM using EERD register
- * @hw: pointer to the HW structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- u32 i, eerd = 0;
- s32 ret_val = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- hw_dbg("nvm parameter(s) out of bounds\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
- for (i = 0; i < words; i++) {
- eerd = ((offset+i) << E1000_NVM_RW_ADDR_SHIFT) +
- E1000_NVM_RW_REG_START;
-
- wr32(E1000_EERD, eerd);
- ret_val = igb_poll_eerd_eewr_done(hw, E1000_NVM_POLL_READ);
- if (ret_val)
- break;
-
- data[i] = (rd32(E1000_EERD) >>
- E1000_NVM_RW_REG_DATA);
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_nvm_spi - Write to EEPROM using SPI
- * @hw: pointer to the HW structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of words to write
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * Writes data to EEPROM at offset using SPI interface.
- *
- * If e1000_update_nvm_checksum is not called after this function , the
- * EEPROM will most likley contain an invalid checksum.
- **/
-s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data)
-{
- struct e1000_nvm_info *nvm = &hw->nvm;
- s32 ret_val;
- u16 widx = 0;
-
- /*
- * A check for invalid values: offset too large, too many words,
- * and not enough words.
- */
- if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
- (words == 0)) {
- hw_dbg("nvm parameter(s) out of bounds\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
- ret_val = hw->nvm.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- msleep(10);
-
- while (widx < words) {
- u8 write_opcode = NVM_WRITE_OPCODE_SPI;
-
- ret_val = igb_ready_nvm_eeprom(hw);
- if (ret_val)
- goto release;
-
- igb_standby_nvm(hw);
-
- /* Send the WRITE ENABLE command (8 bit opcode) */
- igb_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI,
- nvm->opcode_bits);
-
- igb_standby_nvm(hw);
-
- /*
- * Some SPI eeproms use the 8th address bit embedded in the
- * opcode
- */
- if ((nvm->address_bits == 8) && (offset >= 128))
- write_opcode |= NVM_A8_OPCODE_SPI;
-
- /* Send the Write command (8-bit opcode + addr) */
- igb_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits);
- igb_shift_out_eec_bits(hw, (u16)((offset + widx) * 2),
- nvm->address_bits);
-
- /* Loop to allow for up to whole page write of eeprom */
- while (widx < words) {
- u16 word_out = data[widx];
- word_out = (word_out >> 8) | (word_out << 8);
- igb_shift_out_eec_bits(hw, word_out, 16);
- widx++;
-
- if ((((offset + widx) * 2) % nvm->page_size) == 0) {
- igb_standby_nvm(hw);
- break;
- }
- }
- }
-
- msleep(10);
-release:
- hw->nvm.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_part_string - Read device part number
- * @hw: pointer to the HW structure
- * @part_num: pointer to device part number
- * @part_num_size: size of part number buffer
- *
- * Reads the product board assembly (PBA) number from the EEPROM and stores
- * the value in part_num.
- **/
-s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num, u32 part_num_size)
-{
- s32 ret_val;
- u16 nvm_data;
- u16 pointer;
- u16 offset;
- u16 length;
-
- if (part_num == NULL) {
- hw_dbg("PBA string buffer was null\n");
- ret_val = E1000_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_0, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- ret_val = hw->nvm.ops.read(hw, NVM_PBA_OFFSET_1, 1, &pointer);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- /*
- * if nvm_data is not ptr guard the PBA must be in legacy format which
- * means pointer is actually our second data word for the PBA number
- * and we can decode it into an ascii string
- */
- if (nvm_data != NVM_PBA_PTR_GUARD) {
- hw_dbg("NVM PBA number is not stored as string\n");
-
- /* we will need 11 characters to store the PBA */
- if (part_num_size < 11) {
- hw_dbg("PBA string buffer too small\n");
- return E1000_ERR_NO_SPACE;
- }
-
- /* extract hex string from data and pointer */
- part_num[0] = (nvm_data >> 12) & 0xF;
- part_num[1] = (nvm_data >> 8) & 0xF;
- part_num[2] = (nvm_data >> 4) & 0xF;
- part_num[3] = nvm_data & 0xF;
- part_num[4] = (pointer >> 12) & 0xF;
- part_num[5] = (pointer >> 8) & 0xF;
- part_num[6] = '-';
- part_num[7] = 0;
- part_num[8] = (pointer >> 4) & 0xF;
- part_num[9] = pointer & 0xF;
-
- /* put a null character on the end of our string */
- part_num[10] = '\0';
-
- /* switch all the data but the '-' to hex char */
- for (offset = 0; offset < 10; offset++) {
- if (part_num[offset] < 0xA)
- part_num[offset] += '0';
- else if (part_num[offset] < 0x10)
- part_num[offset] += 'A' - 0xA;
- }
-
- goto out;
- }
-
- ret_val = hw->nvm.ops.read(hw, pointer, 1, &length);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
-
- if (length == 0xFFFF || length == 0) {
- hw_dbg("NVM PBA number section invalid length\n");
- ret_val = E1000_ERR_NVM_PBA_SECTION;
- goto out;
- }
- /* check if part_num buffer is big enough */
- if (part_num_size < (((u32)length * 2) - 1)) {
- hw_dbg("PBA string buffer too small\n");
- ret_val = E1000_ERR_NO_SPACE;
- goto out;
- }
-
- /* trim pba length from start of string */
- pointer++;
- length--;
-
- for (offset = 0; offset < length; offset++) {
- ret_val = hw->nvm.ops.read(hw, pointer + offset, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
- part_num[offset * 2] = (u8)(nvm_data >> 8);
- part_num[(offset * 2) + 1] = (u8)(nvm_data & 0xFF);
- }
- part_num[offset * 2] = '\0';
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_mac_addr - Read device MAC address
- * @hw: pointer to the HW structure
- *
- * Reads the device MAC address from the EEPROM and stores the value.
- * Since devices with two ports use the same EEPROM, we increment the
- * last bit in the MAC address for the second port.
- **/
-s32 igb_read_mac_addr(struct e1000_hw *hw)
-{
- u32 rar_high;
- u32 rar_low;
- u16 i;
-
- rar_high = rd32(E1000_RAH(0));
- rar_low = rd32(E1000_RAL(0));
-
- for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
-
- for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
- hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
-
- for (i = 0; i < ETH_ALEN; i++)
- hw->mac.addr[i] = hw->mac.perm_addr[i];
-
- return 0;
-}
-
-/**
- * igb_validate_nvm_checksum - Validate EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
- * and then verifies that the sum of the EEPROM is equal to 0xBABA.
- **/
-s32 igb_validate_nvm_checksum(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error\n");
- goto out;
- }
- checksum += nvm_data;
- }
-
- if (checksum != (u16) NVM_SUM) {
- hw_dbg("NVM Checksum Invalid\n");
- ret_val = -E1000_ERR_NVM;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_update_nvm_checksum - Update EEPROM checksum
- * @hw: pointer to the HW structure
- *
- * Updates the EEPROM checksum by reading/adding each word of the EEPROM
- * up to the checksum. Then calculates the EEPROM checksum and writes the
- * value to the EEPROM.
- **/
-s32 igb_update_nvm_checksum(struct e1000_hw *hw)
-{
- s32 ret_val;
- u16 checksum = 0;
- u16 i, nvm_data;
-
- for (i = 0; i < NVM_CHECKSUM_REG; i++) {
- ret_val = hw->nvm.ops.read(hw, i, 1, &nvm_data);
- if (ret_val) {
- hw_dbg("NVM Read Error while updating checksum.\n");
- goto out;
- }
- checksum += nvm_data;
- }
- checksum = (u16) NVM_SUM - checksum;
- ret_val = hw->nvm.ops.write(hw, NVM_CHECKSUM_REG, 1, &checksum);
- if (ret_val)
- hw_dbg("NVM Write Error while updating checksum.\n");
-
-out:
- return ret_val;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_NVM_H_
-#define _E1000_NVM_H_
-
-s32 igb_acquire_nvm(struct e1000_hw *hw);
-void igb_release_nvm(struct e1000_hw *hw);
-s32 igb_read_mac_addr(struct e1000_hw *hw);
-s32 igb_read_part_num(struct e1000_hw *hw, u32 *part_num);
-s32 igb_read_part_string(struct e1000_hw *hw, u8 *part_num,
- u32 part_num_size);
-s32 igb_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32 igb_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32 igb_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data);
-s32 igb_validate_nvm_checksum(struct e1000_hw *hw);
-s32 igb_update_nvm_checksum(struct e1000_hw *hw);
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/if_ether.h>
-#include <linux/delay.h>
-
-#include "e1000_mac.h"
-#include "e1000_phy.h"
-
-static s32 igb_phy_setup_autoneg(struct e1000_hw *hw);
-static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
- u16 *phy_ctrl);
-static s32 igb_wait_autoneg(struct e1000_hw *hw);
-
-/* Cable length tables */
-static const u16 e1000_m88_cable_length_table[] =
- { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
-#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
- (sizeof(e1000_m88_cable_length_table) / \
- sizeof(e1000_m88_cable_length_table[0]))
-
-static const u16 e1000_igp_2_cable_length_table[] =
- { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
- 0, 0, 0, 3, 6, 10, 13, 16, 19, 23, 26, 29, 32, 35, 38, 41,
- 6, 10, 14, 18, 22, 26, 30, 33, 37, 41, 44, 48, 51, 54, 58, 61,
- 21, 26, 31, 35, 40, 44, 49, 53, 57, 61, 65, 68, 72, 75, 79, 82,
- 40, 45, 51, 56, 61, 66, 70, 75, 79, 83, 87, 91, 94, 98, 101, 104,
- 60, 66, 72, 77, 82, 87, 92, 96, 100, 104, 108, 111, 114, 117, 119, 121,
- 83, 89, 95, 100, 105, 109, 113, 116, 119, 122, 124,
- 104, 109, 114, 118, 121, 124};
-#define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \
- (sizeof(e1000_igp_2_cable_length_table) / \
- sizeof(e1000_igp_2_cable_length_table[0]))
-
-/**
- * igb_check_reset_block - Check if PHY reset is blocked
- * @hw: pointer to the HW structure
- *
- * Read the PHY management control register and check whether a PHY reset
- * is blocked. If a reset is not blocked return 0, otherwise
- * return E1000_BLK_PHY_RESET (12).
- **/
-s32 igb_check_reset_block(struct e1000_hw *hw)
-{
- u32 manc;
-
- manc = rd32(E1000_MANC);
-
- return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ?
- E1000_BLK_PHY_RESET : 0;
-}
-
-/**
- * igb_get_phy_id - Retrieve the PHY ID and revision
- * @hw: pointer to the HW structure
- *
- * Reads the PHY registers and stores the PHY ID and possibly the PHY
- * revision in the hardware structure.
- **/
-s32 igb_get_phy_id(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 phy_id;
-
- ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id);
- if (ret_val)
- goto out;
-
- phy->id = (u32)(phy_id << 16);
- udelay(20);
- ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id);
- if (ret_val)
- goto out;
-
- phy->id |= (u32)(phy_id & PHY_REVISION_MASK);
- phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_reset_dsp - Reset PHY DSP
- * @hw: pointer to the HW structure
- *
- * Reset the digital signal processor.
- **/
-static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
-
- if (!(hw->phy.ops.write_reg))
- goto out;
-
- ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
- if (ret_val)
- goto out;
-
- ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_phy_reg_mdic - Read MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the MDI control regsiter in the PHY at offset and stores the
- * information read to data.
- **/
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
- hw_dbg("PHY Address %d is out of range\n", offset);
- ret_val = -E1000_ERR_PARAM;
- goto out;
- }
-
- /*
- * Set up Op-code, Phy Address, and register offset in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- mdic = ((offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_READ));
-
- wr32(E1000_MDIC, mdic);
-
- /*
- * Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
- * the lower time out
- */
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
- mdic = rd32(E1000_MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- hw_dbg("MDI Read did not complete\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
- if (mdic & E1000_MDIC_ERROR) {
- hw_dbg("MDI Error\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
- *data = (u16) mdic;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_phy_reg_mdic - Write MDI control register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write to register at offset
- *
- * Writes data to MDI control register in the PHY at offset.
- **/
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, mdic = 0;
- s32 ret_val = 0;
-
- if (offset > MAX_PHY_REG_ADDRESS) {
- hw_dbg("PHY Address %d is out of range\n", offset);
- ret_val = -E1000_ERR_PARAM;
- goto out;
- }
-
- /*
- * Set up Op-code, Phy Address, and register offset in the MDI
- * Control register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- mdic = (((u32)data) |
- (offset << E1000_MDIC_REG_SHIFT) |
- (phy->addr << E1000_MDIC_PHY_SHIFT) |
- (E1000_MDIC_OP_WRITE));
-
- wr32(E1000_MDIC, mdic);
-
- /*
- * Poll the ready bit to see if the MDI read completed
- * Increasing the time out as testing showed failures with
- * the lower time out
- */
- for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
- udelay(50);
- mdic = rd32(E1000_MDIC);
- if (mdic & E1000_MDIC_READY)
- break;
- }
- if (!(mdic & E1000_MDIC_READY)) {
- hw_dbg("MDI Write did not complete\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
- if (mdic & E1000_MDIC_ERROR) {
- hw_dbg("MDI Error\n");
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_read_phy_reg_i2c - Read PHY register using i2c
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Reads the PHY register at offset using the i2c interface and stores the
- * retrieved information in data.
- **/
-s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, i2ccmd = 0;
-
-
- /*
- * Set up Op-code, Phy Address, and register address in the I2CCMD
- * register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
- (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
- (E1000_I2CCMD_OPCODE_READ));
-
- wr32(E1000_I2CCMD, i2ccmd);
-
- /* Poll the ready bit to see if the I2C read completed */
- for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
- udelay(50);
- i2ccmd = rd32(E1000_I2CCMD);
- if (i2ccmd & E1000_I2CCMD_READY)
- break;
- }
- if (!(i2ccmd & E1000_I2CCMD_READY)) {
- hw_dbg("I2CCMD Read did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (i2ccmd & E1000_I2CCMD_ERROR) {
- hw_dbg("I2CCMD Error bit set\n");
- return -E1000_ERR_PHY;
- }
-
- /* Need to byte-swap the 16-bit value. */
- *data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
-
- return 0;
-}
-
-/**
- * igb_write_phy_reg_i2c - Write PHY register using i2c
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Writes the data to PHY register at the offset using the i2c interface.
- **/
-s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
-{
- struct e1000_phy_info *phy = &hw->phy;
- u32 i, i2ccmd = 0;
- u16 phy_data_swapped;
-
-
- /* Swap the data bytes for the I2C interface */
- phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
-
- /*
- * Set up Op-code, Phy Address, and register address in the I2CCMD
- * register. The MAC will take care of interfacing with the
- * PHY to retrieve the desired data.
- */
- i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
- (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
- E1000_I2CCMD_OPCODE_WRITE |
- phy_data_swapped);
-
- wr32(E1000_I2CCMD, i2ccmd);
-
- /* Poll the ready bit to see if the I2C read completed */
- for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
- udelay(50);
- i2ccmd = rd32(E1000_I2CCMD);
- if (i2ccmd & E1000_I2CCMD_READY)
- break;
- }
- if (!(i2ccmd & E1000_I2CCMD_READY)) {
- hw_dbg("I2CCMD Write did not complete\n");
- return -E1000_ERR_PHY;
- }
- if (i2ccmd & E1000_I2CCMD_ERROR) {
- hw_dbg("I2CCMD Error bit set\n");
- return -E1000_ERR_PHY;
- }
-
- return 0;
-}
-
-/**
- * igb_read_phy_reg_igp - Read igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to be read
- * @data: pointer to the read data
- *
- * Acquires semaphore, if necessary, then reads the PHY register at offset
- * and storing the retrieved information in data. Release any acquired
- * semaphores before exiting.
- **/
-s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- s32 ret_val = 0;
-
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = igb_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
- hw->phy.ops.release(hw);
- goto out;
- }
- }
-
- ret_val = igb_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_write_phy_reg_igp - Write igp PHY register
- * @hw: pointer to the HW structure
- * @offset: register offset to write to
- * @data: data to write at register offset
- *
- * Acquires semaphore, if necessary, then writes the data to PHY register
- * at the offset. Release any acquired semaphores before exiting.
- **/
-s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
-{
- s32 ret_val = 0;
-
- if (!(hw->phy.ops.acquire))
- goto out;
-
- ret_val = hw->phy.ops.acquire(hw);
- if (ret_val)
- goto out;
-
- if (offset > MAX_PHY_MULTI_PAGE_REG) {
- ret_val = igb_write_phy_reg_mdic(hw,
- IGP01E1000_PHY_PAGE_SELECT,
- (u16)offset);
- if (ret_val) {
- hw->phy.ops.release(hw);
- goto out;
- }
- }
-
- ret_val = igb_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
- data);
-
- hw->phy.ops.release(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_copper_link_setup_82580 - Setup 82580 PHY for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up Carrier-sense on Transmit and downshift values.
- **/
-s32 igb_copper_link_setup_82580(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
-
-
- if (phy->reset_disable) {
- ret_val = 0;
- goto out;
- }
-
- if (phy->type == e1000_phy_82580) {
- ret_val = hw->phy.ops.reset(hw);
- if (ret_val) {
- hw_dbg("Error resetting the PHY.\n");
- goto out;
- }
- }
-
- /* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_reg(hw, I82580_CFG_REG, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data |= I82580_CFG_ASSERT_CRS_ON_TX;
-
- /* Enable downshift */
- phy_data |= I82580_CFG_ENABLE_DOWNSHIFT;
-
- ret_val = phy->ops.write_reg(hw, I82580_CFG_REG, phy_data);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_copper_link_setup_m88 - Setup m88 PHY's for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up MDI/MDI-X and polarity for m88 PHY's. If necessary, transmit clock
- * and downshift values are set also.
- **/
-s32 igb_copper_link_setup_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
-
- if (phy->reset_disable) {
- ret_val = 0;
- goto out;
- }
-
- /* Enable CRS on TX. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
-
- /*
- * Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
- switch (phy->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- case 0:
- default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
-
- /*
- * Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (phy->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-
- ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- goto out;
-
- if (phy->revision < E1000_REVISION_4) {
- /*
- * Force TX_CLK in the Extended PHY Specific Control Register
- * to 25MHz clock.
- */
- ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- &phy_data);
- if (ret_val)
- goto out;
-
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
-
- if ((phy->revision == E1000_REVISION_2) &&
- (phy->id == M88E1111_I_PHY_ID)) {
- /* 82573L PHY - set the downshift counter to 5x. */
- phy_data &= ~M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK;
- phy_data |= M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X;
- } else {
- /* Configure Master and Slave downshift values */
- phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK);
- phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X |
- M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X);
- }
- ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL,
- phy_data);
- if (ret_val)
- goto out;
- }
-
- /* Commit the changes. */
- ret_val = igb_phy_sw_reset(hw);
- if (ret_val) {
- hw_dbg("Error committing the PHY changes\n");
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_copper_link_setup_m88_gen2 - Setup m88 PHY's for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up MDI/MDI-X and polarity for i347-AT4, m88e1322 and m88e1112 PHY's.
- * Also enables and sets the downshift parameters.
- **/
-s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
-
- if (phy->reset_disable) {
- ret_val = 0;
- goto out;
- }
-
- /* Enable CRS on Tx. This must be set for half-duplex operation. */
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- /*
- * Options:
- * MDI/MDI-X = 0 (default)
- * 0 - Auto for all speeds
- * 1 - MDI mode
- * 2 - MDI-X mode
- * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes)
- */
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
-
- switch (phy->mdix) {
- case 1:
- phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE;
- break;
- case 2:
- phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE;
- break;
- case 3:
- /* M88E1112 does not support this mode) */
- if (phy->id != M88E1112_E_PHY_ID) {
- phy_data |= M88E1000_PSCR_AUTO_X_1000T;
- break;
- }
- case 0:
- default:
- phy_data |= M88E1000_PSCR_AUTO_X_MODE;
- break;
- }
-
- /*
- * Options:
- * disable_polarity_correction = 0 (default)
- * Automatic Correction for Reversed Cable Polarity
- * 0 - Disabled
- * 1 - Enabled
- */
- phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL;
- if (phy->disable_polarity_correction == 1)
- phy_data |= M88E1000_PSCR_POLARITY_REVERSAL;
-
- /* Enable downshift and setting it to X6 */
- phy_data &= ~I347AT4_PSCR_DOWNSHIFT_MASK;
- phy_data |= I347AT4_PSCR_DOWNSHIFT_6X;
- phy_data |= I347AT4_PSCR_DOWNSHIFT_ENABLE;
-
- ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- goto out;
-
- /* Commit the changes. */
- ret_val = igb_phy_sw_reset(hw);
- if (ret_val) {
- hw_dbg("Error committing the PHY changes\n");
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_copper_link_setup_igp - Setup igp PHY's for copper link
- * @hw: pointer to the HW structure
- *
- * Sets up LPLU, MDI/MDI-X, polarity, Smartspeed and Master/Slave config for
- * igp PHY's.
- **/
-s32 igb_copper_link_setup_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- if (phy->reset_disable) {
- ret_val = 0;
- goto out;
- }
-
- ret_val = phy->ops.reset(hw);
- if (ret_val) {
- hw_dbg("Error resetting the PHY.\n");
- goto out;
- }
-
- /*
- * Wait 100ms for MAC to configure PHY from NVM settings, to avoid
- * timeout issues when LFS is enabled.
- */
- msleep(100);
-
- /*
- * The NVM settings will configure LPLU in D3 for
- * non-IGP1 PHYs.
- */
- if (phy->type == e1000_phy_igp) {
- /* disable lplu d3 during driver init */
- if (phy->ops.set_d3_lplu_state)
- ret_val = phy->ops.set_d3_lplu_state(hw, false);
- if (ret_val) {
- hw_dbg("Error Disabling LPLU D3\n");
- goto out;
- }
- }
-
- /* disable lplu d0 during driver init */
- ret_val = phy->ops.set_d0_lplu_state(hw, false);
- if (ret_val) {
- hw_dbg("Error Disabling LPLU D0\n");
- goto out;
- }
- /* Configure mdi-mdix settings */
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &data);
- if (ret_val)
- goto out;
-
- data &= ~IGP01E1000_PSCR_AUTO_MDIX;
-
- switch (phy->mdix) {
- case 1:
- data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 2:
- data |= IGP01E1000_PSCR_FORCE_MDI_MDIX;
- break;
- case 0:
- default:
- data |= IGP01E1000_PSCR_AUTO_MDIX;
- break;
- }
- ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, data);
- if (ret_val)
- goto out;
-
- /* set auto-master slave resolution settings */
- if (hw->mac.autoneg) {
- /*
- * when autonegotiation advertisement is only 1000Mbps then we
- * should disable SmartSpeed and enable Auto MasterSlave
- * resolution as hardware default.
- */
- if (phy->autoneg_advertised == ADVERTISE_1000_FULL) {
- /* Disable SmartSpeed */
- ret_val = phy->ops.read_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- goto out;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- goto out;
-
- /* Set auto Master/Slave resolution process */
- ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
- if (ret_val)
- goto out;
-
- data &= ~CR_1000T_MS_ENABLE;
- ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
- if (ret_val)
- goto out;
- }
-
- ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, &data);
- if (ret_val)
- goto out;
-
- /* load defaults for future use */
- phy->original_ms_type = (data & CR_1000T_MS_ENABLE) ?
- ((data & CR_1000T_MS_VALUE) ?
- e1000_ms_force_master :
- e1000_ms_force_slave) :
- e1000_ms_auto;
-
- switch (phy->ms_type) {
- case e1000_ms_force_master:
- data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE);
- break;
- case e1000_ms_force_slave:
- data |= CR_1000T_MS_ENABLE;
- data &= ~(CR_1000T_MS_VALUE);
- break;
- case e1000_ms_auto:
- data &= ~CR_1000T_MS_ENABLE;
- default:
- break;
- }
- ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_copper_link_autoneg - Setup/Enable autoneg for copper link
- * @hw: pointer to the HW structure
- *
- * Performs initial bounds checking on autoneg advertisement parameter, then
- * configure to advertise the full capability. Setup the PHY to autoneg
- * and restart the negotiation process between the link partner. If
- * autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
- **/
-static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_ctrl;
-
- /*
- * Perform some bounds checking on the autoneg advertisement
- * parameter.
- */
- phy->autoneg_advertised &= phy->autoneg_mask;
-
- /*
- * If autoneg_advertised is zero, we assume it was not defaulted
- * by the calling code so we set to advertise full capability.
- */
- if (phy->autoneg_advertised == 0)
- phy->autoneg_advertised = phy->autoneg_mask;
-
- hw_dbg("Reconfiguring auto-neg advertisement params\n");
- ret_val = igb_phy_setup_autoneg(hw);
- if (ret_val) {
- hw_dbg("Error Setting up Auto-Negotiation\n");
- goto out;
- }
- hw_dbg("Restarting Auto-Neg\n");
-
- /*
- * Restart auto-negotiation by setting the Auto Neg Enable bit and
- * the Auto Neg Restart bit in the PHY control register.
- */
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
- if (ret_val)
- goto out;
-
- phy_ctrl |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG);
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
- if (ret_val)
- goto out;
-
- /*
- * Does the user want to wait for Auto-Neg to complete here, or
- * check at a later time (for example, callback routine).
- */
- if (phy->autoneg_wait_to_complete) {
- ret_val = igb_wait_autoneg(hw);
- if (ret_val) {
- hw_dbg("Error while waiting for "
- "autoneg to complete\n");
- goto out;
- }
- }
-
- hw->mac.get_link_status = true;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_setup_autoneg - Configure PHY for auto-negotiation
- * @hw: pointer to the HW structure
- *
- * Reads the MII auto-neg advertisement register and/or the 1000T control
- * register and if the PHY is already setup for auto-negotiation, then
- * return successful. Otherwise, setup advertisement and flow control to
- * the appropriate values for the wanted auto-negotiation.
- **/
-static s32 igb_phy_setup_autoneg(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 mii_autoneg_adv_reg;
- u16 mii_1000t_ctrl_reg = 0;
-
- phy->autoneg_advertised &= phy->autoneg_mask;
-
- /* Read the MII Auto-Neg Advertisement Register (Address 4). */
- ret_val = phy->ops.read_reg(hw, PHY_AUTONEG_ADV, &mii_autoneg_adv_reg);
- if (ret_val)
- goto out;
-
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
- /* Read the MII 1000Base-T Control Register (Address 9). */
- ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL,
- &mii_1000t_ctrl_reg);
- if (ret_val)
- goto out;
- }
-
- /*
- * Need to parse both autoneg_advertised and fc and set up
- * the appropriate PHY registers. First we will parse for
- * autoneg_advertised software override. Since we can advertise
- * a plethora of combinations, we need to check each bit
- * individually.
- */
-
- /*
- * First we clear all the 10/100 mb speed bits in the Auto-Neg
- * Advertisement Register (Address 4) and the 1000 mb speed bits in
- * the 1000Base-T Control Register (Address 9).
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS |
- NWAY_AR_100TX_HD_CAPS |
- NWAY_AR_10T_FD_CAPS |
- NWAY_AR_10T_HD_CAPS);
- mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS);
-
- hw_dbg("autoneg_advertised %x\n", phy->autoneg_advertised);
-
- /* Do we want to advertise 10 Mb Half Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_10_HALF) {
- hw_dbg("Advertise 10mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_HD_CAPS;
- }
-
- /* Do we want to advertise 10 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_10_FULL) {
- hw_dbg("Advertise 10mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_10T_FD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Half Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_100_HALF) {
- hw_dbg("Advertise 100mb Half duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_HD_CAPS;
- }
-
- /* Do we want to advertise 100 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_100_FULL) {
- hw_dbg("Advertise 100mb Full duplex\n");
- mii_autoneg_adv_reg |= NWAY_AR_100TX_FD_CAPS;
- }
-
- /* We do not allow the Phy to advertise 1000 Mb Half Duplex */
- if (phy->autoneg_advertised & ADVERTISE_1000_HALF)
- hw_dbg("Advertise 1000mb Half duplex request denied!\n");
-
- /* Do we want to advertise 1000 Mb Full Duplex? */
- if (phy->autoneg_advertised & ADVERTISE_1000_FULL) {
- hw_dbg("Advertise 1000mb Full duplex\n");
- mii_1000t_ctrl_reg |= CR_1000T_FD_CAPS;
- }
-
- /*
- * Check for a software override of the flow control settings, and
- * setup the PHY advertisement registers accordingly. If
- * auto-negotiation is enabled, then software will have to set the
- * "PAUSE" bits to the correct value in the Auto-Negotiation
- * Advertisement Register (PHY_AUTONEG_ADV) and re-start auto-
- * negotiation.
- *
- * The possible values of the "fc" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: No software override. The flow control configuration
- * in the EEPROM is used.
- */
- switch (hw->fc.current_mode) {
- case e1000_fc_none:
- /*
- * Flow control (RX & TX) is completely disabled by a
- * software over-ride.
- */
- mii_autoneg_adv_reg &= ~(NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case e1000_fc_rx_pause:
- /*
- * RX Flow control is enabled, and TX Flow control is
- * disabled, by a software over-ride.
- *
- * Since there really isn't a way to advertise that we are
- * capable of RX Pause ONLY, we will advertise that we
- * support both symmetric and asymmetric RX PAUSE. Later
- * (in e1000_config_fc_after_link_up) we will disable the
- * hw's ability to send PAUSE frames.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- case e1000_fc_tx_pause:
- /*
- * TX Flow control is enabled, and RX Flow control is
- * disabled, by a software over-ride.
- */
- mii_autoneg_adv_reg |= NWAY_AR_ASM_DIR;
- mii_autoneg_adv_reg &= ~NWAY_AR_PAUSE;
- break;
- case e1000_fc_full:
- /*
- * Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- mii_autoneg_adv_reg |= (NWAY_AR_ASM_DIR | NWAY_AR_PAUSE);
- break;
- default:
- hw_dbg("Flow control param set incorrectly\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- ret_val = phy->ops.write_reg(hw, PHY_AUTONEG_ADV, mii_autoneg_adv_reg);
- if (ret_val)
- goto out;
-
- hw_dbg("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg);
-
- if (phy->autoneg_mask & ADVERTISE_1000_FULL) {
- ret_val = phy->ops.write_reg(hw,
- PHY_1000T_CTRL,
- mii_1000t_ctrl_reg);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_setup_copper_link - Configure copper link settings
- * @hw: pointer to the HW structure
- *
- * Calls the appropriate function to configure the link for auto-neg or forced
- * speed and duplex. Then we check for link, once link is established calls
- * to configure collision distance and flow control are called. If link is
- * not established, we return -E1000_ERR_PHY (-2).
- **/
-s32 igb_setup_copper_link(struct e1000_hw *hw)
-{
- s32 ret_val;
- bool link;
-
-
- if (hw->mac.autoneg) {
- /*
- * Setup autoneg and flow control advertisement and perform
- * autonegotiation.
- */
- ret_val = igb_copper_link_autoneg(hw);
- if (ret_val)
- goto out;
- } else {
- /*
- * PHY will be set to 10H, 10F, 100H or 100F
- * depending on user settings.
- */
- hw_dbg("Forcing Speed and Duplex\n");
- ret_val = hw->phy.ops.force_speed_duplex(hw);
- if (ret_val) {
- hw_dbg("Error Forcing Speed and Duplex\n");
- goto out;
- }
- }
-
- /*
- * Check link status. Wait up to 100 microseconds for link to become
- * valid.
- */
- ret_val = igb_phy_has_link(hw,
- COPPER_LINK_UP_LIMIT,
- 10,
- &link);
- if (ret_val)
- goto out;
-
- if (link) {
- hw_dbg("Valid link established!!!\n");
- igb_config_collision_dist(hw);
- ret_val = igb_config_fc_after_link_up(hw);
- } else {
- hw_dbg("Unable to establish link!!!\n");
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex. Clears the
- * auto-crossover to force MDI manually. Waits for link and returns
- * successful if link up is successful, else -E1000_ERR_PHY (-2).
- **/
-s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- goto out;
-
- igb_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- goto out;
-
- /*
- * Clear Auto-Crossover to force MDI manually. IGP requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX;
- phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX;
-
- ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data);
- if (ret_val)
- goto out;
-
- hw_dbg("IGP PSCR: %X\n", phy_data);
-
- udelay(1);
-
- if (phy->autoneg_wait_to_complete) {
- hw_dbg("Waiting for forced speed/duplex link on IGP phy.\n");
-
- ret_val = igb_phy_has_link(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
-
- if (!link)
- hw_dbg("Link taking longer than expected.\n");
-
- /* Try once more */
- ret_val = igb_phy_has_link(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_force_speed_duplex_m88 - Force speed/duplex for m88 PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex. Clears the
- * auto-crossover to force MDI manually. Resets the PHY to commit the
- * changes. If time expires while waiting for link up, we reset the DSP.
- * After reset, TX_CLK and CRS on TX must be set. Return successful upon
- * successful completion, else return corresponding error code.
- **/
-s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- /*
- * Clear Auto-Crossover to force MDI manually. M88E1000 requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data &= ~M88E1000_PSCR_AUTO_X_MODE;
- ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- goto out;
-
- hw_dbg("M88E1000 PSCR: %X\n", phy_data);
-
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- goto out;
-
- igb_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- goto out;
-
- /* Reset the phy to commit changes. */
- ret_val = igb_phy_sw_reset(hw);
- if (ret_val)
- goto out;
-
- if (phy->autoneg_wait_to_complete) {
- hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
-
- ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- if (hw->phy.type != e1000_phy_m88 ||
- hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID) {
- hw_dbg("Link taking longer than expected.\n");
- } else {
-
- /*
- * We didn't get link.
- * Reset the DSP and cross our fingers.
- */
- ret_val = phy->ops.write_reg(hw,
- M88E1000_PHY_PAGE_SELECT,
- 0x001d);
- if (ret_val)
- goto out;
- ret_val = igb_phy_reset_dsp(hw);
- if (ret_val)
- goto out;
- }
- }
-
- /* Try once more */
- ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
- 100000, &link);
- if (ret_val)
- goto out;
- }
-
- if (hw->phy.type != e1000_phy_m88 ||
- hw->phy.id == I347AT4_E_PHY_ID ||
- hw->phy.id == M88E1112_E_PHY_ID)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- /*
- * Resetting the phy means we need to re-force TX_CLK in the
- * Extended PHY Specific Control Register to 25MHz clock from
- * the reset value of 2.5MHz.
- */
- phy_data |= M88E1000_EPSCR_TX_CLK_25;
- ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data);
- if (ret_val)
- goto out;
-
- /*
- * In addition, we must re-enable CRS on Tx for both half and full
- * duplex.
- */
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
- ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_force_speed_duplex_setup - Configure forced PHY speed/duplex
- * @hw: pointer to the HW structure
- * @phy_ctrl: pointer to current value of PHY_CONTROL
- *
- * Forces speed and duplex on the PHY by doing the following: disable flow
- * control, force speed/duplex on the MAC, disable auto speed detection,
- * disable auto-negotiation, configure duplex, configure speed, configure
- * the collision distance, write configuration to CTRL register. The
- * caller must write to the PHY_CONTROL register for these settings to
- * take affect.
- **/
-static void igb_phy_force_speed_duplex_setup(struct e1000_hw *hw,
- u16 *phy_ctrl)
-{
- struct e1000_mac_info *mac = &hw->mac;
- u32 ctrl;
-
- /* Turn off flow control when forcing speed/duplex */
- hw->fc.current_mode = e1000_fc_none;
-
- /* Force speed/duplex on the mac */
- ctrl = rd32(E1000_CTRL);
- ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
- ctrl &= ~E1000_CTRL_SPD_SEL;
-
- /* Disable Auto Speed Detection */
- ctrl &= ~E1000_CTRL_ASDE;
-
- /* Disable autoneg on the phy */
- *phy_ctrl &= ~MII_CR_AUTO_NEG_EN;
-
- /* Forcing Full or Half Duplex? */
- if (mac->forced_speed_duplex & E1000_ALL_HALF_DUPLEX) {
- ctrl &= ~E1000_CTRL_FD;
- *phy_ctrl &= ~MII_CR_FULL_DUPLEX;
- hw_dbg("Half Duplex\n");
- } else {
- ctrl |= E1000_CTRL_FD;
- *phy_ctrl |= MII_CR_FULL_DUPLEX;
- hw_dbg("Full Duplex\n");
- }
-
- /* Forcing 10mb or 100mb? */
- if (mac->forced_speed_duplex & E1000_ALL_100_SPEED) {
- ctrl |= E1000_CTRL_SPD_100;
- *phy_ctrl |= MII_CR_SPEED_100;
- *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_10);
- hw_dbg("Forcing 100mb\n");
- } else {
- ctrl &= ~(E1000_CTRL_SPD_1000 | E1000_CTRL_SPD_100);
- *phy_ctrl |= MII_CR_SPEED_10;
- *phy_ctrl &= ~(MII_CR_SPEED_1000 | MII_CR_SPEED_100);
- hw_dbg("Forcing 10mb\n");
- }
-
- igb_config_collision_dist(hw);
-
- wr32(E1000_CTRL, ctrl);
-}
-
-/**
- * igb_set_d3_lplu_state - Sets low power link up state for D3
- * @hw: pointer to the HW structure
- * @active: boolean used to enable/disable lplu
- *
- * Success returns 0, Failure returns 1
- *
- * The low power link up (lplu) state is set to the power management level D3
- * and SmartSpeed is disabled when active is true, else clear lplu for D3
- * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU
- * is used during Dx states where the power conservation is most important.
- * During driver activity, SmartSpeed should be enabled so performance is
- * maintained.
- **/
-s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 data;
-
- if (!(hw->phy.ops.read_reg))
- goto out;
-
- ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
- if (ret_val)
- goto out;
-
- if (!active) {
- data &= ~IGP02E1000_PM_D3_LPLU;
- ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- data);
- if (ret_val)
- goto out;
- /*
- * LPLU and SmartSpeed are mutually exclusive. LPLU is used
- * during Dx states where the power conservation is most
- * important. During driver activity we should enable
- * SmartSpeed, so performance is maintained.
- */
- if (phy->smart_speed == e1000_smart_speed_on) {
- ret_val = phy->ops.read_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- goto out;
-
- data |= IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- goto out;
- } else if (phy->smart_speed == e1000_smart_speed_off) {
- ret_val = phy->ops.read_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- goto out;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw,
- IGP01E1000_PHY_PORT_CONFIG,
- data);
- if (ret_val)
- goto out;
- }
- } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
- (phy->autoneg_advertised == E1000_ALL_NOT_GIG) ||
- (phy->autoneg_advertised == E1000_ALL_10_SPEED)) {
- data |= IGP02E1000_PM_D3_LPLU;
- ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT,
- data);
- if (ret_val)
- goto out;
-
- /* When LPLU is enabled, we should disable SmartSpeed */
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- &data);
- if (ret_val)
- goto out;
-
- data &= ~IGP01E1000_PSCFR_SMART_SPEED;
- ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG,
- data);
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_check_downshift - Checks whether a downshift in speed occurred
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns 1
- *
- * A downshift is detected by querying the PHY link health.
- **/
-s32 igb_check_downshift(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, offset, mask;
-
- switch (phy->type) {
- case e1000_phy_m88:
- case e1000_phy_gg82563:
- offset = M88E1000_PHY_SPEC_STATUS;
- mask = M88E1000_PSSR_DOWNSHIFT;
- break;
- case e1000_phy_igp_2:
- case e1000_phy_igp:
- case e1000_phy_igp_3:
- offset = IGP01E1000_PHY_LINK_HEALTH;
- mask = IGP01E1000_PLHR_SS_DOWNGRADE;
- break;
- default:
- /* speed downshift not supported */
- phy->speed_downgraded = false;
- ret_val = 0;
- goto out;
- }
-
- ret_val = phy->ops.read_reg(hw, offset, &phy_data);
-
- if (!ret_val)
- phy->speed_downgraded = (phy_data & mask) ? true : false;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_check_polarity_m88 - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY specific status register.
- **/
-static s32 igb_check_polarity_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * igb_check_polarity_igp - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY port status register, and the
- * current speed (since there is no polarity at 100Mbps).
- **/
-static s32 igb_check_polarity_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data, offset, mask;
-
- /*
- * Polarity is determined based on the speed of
- * our connection.
- */
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
- if (ret_val)
- goto out;
-
- if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- offset = IGP01E1000_PHY_PCS_INIT_REG;
- mask = IGP01E1000_PHY_POLARITY_MASK;
- } else {
- /*
- * This really only applies to 10Mbps since
- * there is no polarity for 100Mbps (always 0).
- */
- offset = IGP01E1000_PHY_PORT_STATUS;
- mask = IGP01E1000_PSSR_POLARITY_REVERSED;
- }
-
- ret_val = phy->ops.read_reg(hw, offset, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & mask)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_wait_autoneg - Wait for auto-neg compeletion
- * @hw: pointer to the HW structure
- *
- * Waits for auto-negotiation to complete or for the auto-negotiation time
- * limit to expire, which ever happens first.
- **/
-static s32 igb_wait_autoneg(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 i, phy_status;
-
- /* Break after autoneg completes or PHY_AUTO_NEG_LIMIT expires. */
- for (i = PHY_AUTO_NEG_LIMIT; i > 0; i--) {
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- if (phy_status & MII_SR_AUTONEG_COMPLETE)
- break;
- msleep(100);
- }
-
- /*
- * PHY_AUTO_NEG_TIME expiration doesn't guarantee auto-negotiation
- * has completed.
- */
- return ret_val;
-}
-
-/**
- * igb_phy_has_link - Polls PHY for link
- * @hw: pointer to the HW structure
- * @iterations: number of times to poll for link
- * @usec_interval: delay between polling attempts
- * @success: pointer to whether polling was successful or not
- *
- * Polls the PHY status register for link, 'iterations' number of times.
- **/
-s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success)
-{
- s32 ret_val = 0;
- u16 i, phy_status;
-
- for (i = 0; i < iterations; i++) {
- /*
- * Some PHYs require the PHY_STATUS register to be read
- * twice due to the link bit being sticky. No harm doing
- * it across the board.
- */
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
- if (ret_val) {
- /*
- * If the first read fails, another entity may have
- * ownership of the resources, wait and try again to
- * see if they have relinquished the resources yet.
- */
- udelay(usec_interval);
- }
- ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
- if (ret_val)
- break;
- if (phy_status & MII_SR_LINK_STATUS)
- break;
- if (usec_interval >= 1000)
- mdelay(usec_interval/1000);
- else
- udelay(usec_interval);
- }
-
- *success = (i < iterations) ? true : false;
-
- return ret_val;
-}
-
-/**
- * igb_get_cable_length_m88 - Determine cable length for m88 PHY
- * @hw: pointer to the HW structure
- *
- * Reads the PHY specific status register to retrieve the cable length
- * information. The cable length is determined by averaging the minimum and
- * maximum values to get the "average" cable length. The m88 PHY has four
- * possible cable length values, which are:
- * Register Value Cable Length
- * 0 < 50 meters
- * 1 50 - 80 meters
- * 2 80 - 110 meters
- * 3 110 - 140 meters
- * 4 > 140 meters
- **/
-s32 igb_get_cable_length_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, index;
-
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
- phy->min_cable_length = e1000_m88_cable_length_table[index];
- phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
-
- phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-
-out:
- return ret_val;
-}
-
-s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, phy_data2, index, default_page, is_cm;
-
- switch (hw->phy.id) {
- case I347AT4_E_PHY_ID:
- /* Remember the original page select and set it to 7 */
- ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
- &default_page);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x07);
- if (ret_val)
- goto out;
-
- /* Get cable length from PHY Cable Diagnostics Control Reg */
- ret_val = phy->ops.read_reg(hw, (I347AT4_PCDL + phy->addr),
- &phy_data);
- if (ret_val)
- goto out;
-
- /* Check if the unit of cable length is meters or cm */
- ret_val = phy->ops.read_reg(hw, I347AT4_PCDC, &phy_data2);
- if (ret_val)
- goto out;
-
- is_cm = !(phy_data & I347AT4_PCDC_CABLE_LENGTH_UNIT);
-
- /* Populate the phy structure with cable length in meters */
- phy->min_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->max_cable_length = phy_data / (is_cm ? 100 : 1);
- phy->cable_length = phy_data / (is_cm ? 100 : 1);
-
- /* Reset the page selec to its original value */
- ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
- default_page);
- if (ret_val)
- goto out;
- break;
- case M88E1112_E_PHY_ID:
- /* Remember the original page select and set it to 5 */
- ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
- &default_page);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT, 0x05);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, M88E1112_VCT_DSP_DISTANCE,
- &phy_data);
- if (ret_val)
- goto out;
-
- index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
- M88E1000_PSSR_CABLE_LENGTH_SHIFT;
- if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
- phy->min_cable_length = e1000_m88_cable_length_table[index];
- phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
-
- phy->cable_length = (phy->min_cable_length +
- phy->max_cable_length) / 2;
-
- /* Reset the page select to its original value */
- ret_val = phy->ops.write_reg(hw, I347AT4_PAGE_SELECT,
- default_page);
- if (ret_val)
- goto out;
-
- break;
- default:
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_cable_length_igp_2 - Determine cable length for igp2 PHY
- * @hw: pointer to the HW structure
- *
- * The automatic gain control (agc) normalizes the amplitude of the
- * received signal, adjusting for the attenuation produced by the
- * cable. By reading the AGC registers, which represent the
- * combination of coarse and fine gain value, the value can be put
- * into a lookup table to obtain the approximate cable length
- * for each channel.
- **/
-s32 igb_get_cable_length_igp_2(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 phy_data, i, agc_value = 0;
- u16 cur_agc_index, max_agc_index = 0;
- u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1;
- static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = {
- IGP02E1000_PHY_AGC_A,
- IGP02E1000_PHY_AGC_B,
- IGP02E1000_PHY_AGC_C,
- IGP02E1000_PHY_AGC_D
- };
-
- /* Read the AGC registers for all channels */
- for (i = 0; i < IGP02E1000_PHY_CHANNEL_NUM; i++) {
- ret_val = phy->ops.read_reg(hw, agc_reg_array[i], &phy_data);
- if (ret_val)
- goto out;
-
- /*
- * Getting bits 15:9, which represent the combination of
- * coarse and fine gain values. The result is a number
- * that can be put into the lookup table to obtain the
- * approximate cable length.
- */
- cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) &
- IGP02E1000_AGC_LENGTH_MASK;
-
- /* Array index bound check. */
- if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) ||
- (cur_agc_index == 0)) {
- ret_val = -E1000_ERR_PHY;
- goto out;
- }
-
- /* Remove min & max AGC values from calculation. */
- if (e1000_igp_2_cable_length_table[min_agc_index] >
- e1000_igp_2_cable_length_table[cur_agc_index])
- min_agc_index = cur_agc_index;
- if (e1000_igp_2_cable_length_table[max_agc_index] <
- e1000_igp_2_cable_length_table[cur_agc_index])
- max_agc_index = cur_agc_index;
-
- agc_value += e1000_igp_2_cable_length_table[cur_agc_index];
- }
-
- agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] +
- e1000_igp_2_cable_length_table[max_agc_index]);
- agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2);
-
- /* Calculate cable length with the error range of +/- 10 meters. */
- phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ?
- (agc_value - IGP02E1000_AGC_RANGE) : 0;
- phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE;
-
- phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_phy_info_m88 - Retrieve PHY information
- * @hw: pointer to the HW structure
- *
- * Valid for only copper links. Read the PHY status register (sticky read)
- * to verify that link is up. Read the PHY special control register to
- * determine the polarity and 10base-T extended distance. Read the PHY
- * special status register to determine MDI/MDIx and current speed. If
- * speed is 1000, then determine cable length, local and remote receiver.
- **/
-s32 igb_get_phy_info_m88(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
- if (phy->media_type != e1000_media_type_copper) {
- hw_dbg("Phy info is only valid for copper media\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- ret_val = igb_phy_has_link(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- hw_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data);
- if (ret_val)
- goto out;
-
- phy->polarity_correction = (phy_data & M88E1000_PSCR_POLARITY_REVERSAL)
- ? true : false;
-
- ret_val = igb_check_polarity_m88(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- phy->is_mdix = (phy_data & M88E1000_PSSR_MDIX) ? true : false;
-
- if ((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) {
- ret_val = phy->ops.get_cable_length(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- /* Set values to "undefined" */
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_phy_info_igp - Retrieve igp PHY information
- * @hw: pointer to the HW structure
- *
- * Read PHY status to determine if link is up. If link is up, then
- * set/determine 10base-T extended distance and polarity correction. Read
- * PHY port status to determine MDI/MDIx and speed. Based on the speed,
- * determine on the cable length, local and remote receiver.
- **/
-s32 igb_get_phy_info_igp(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
- ret_val = igb_phy_has_link(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- hw_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- phy->polarity_correction = true;
-
- ret_val = igb_check_polarity_igp(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_STATUS, &data);
- if (ret_val)
- goto out;
-
- phy->is_mdix = (data & IGP01E1000_PSSR_MDIX) ? true : false;
-
- if ((data & IGP01E1000_PSSR_SPEED_MASK) ==
- IGP01E1000_PSSR_SPEED_1000MBPS) {
- ret_val = phy->ops.get_cable_length(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
- if (ret_val)
- goto out;
-
- phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_sw_reset - PHY software reset
- * @hw: pointer to the HW structure
- *
- * Does a software reset of the PHY by reading the PHY control register and
- * setting/write the control register reset bit to the PHY.
- **/
-s32 igb_phy_sw_reset(struct e1000_hw *hw)
-{
- s32 ret_val = 0;
- u16 phy_ctrl;
-
- if (!(hw->phy.ops.read_reg))
- goto out;
-
- ret_val = hw->phy.ops.read_reg(hw, PHY_CONTROL, &phy_ctrl);
- if (ret_val)
- goto out;
-
- phy_ctrl |= MII_CR_RESET;
- ret_val = hw->phy.ops.write_reg(hw, PHY_CONTROL, phy_ctrl);
- if (ret_val)
- goto out;
-
- udelay(1);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_hw_reset - PHY hardware reset
- * @hw: pointer to the HW structure
- *
- * Verify the reset block is not blocking us from resetting. Acquire
- * semaphore (if necessary) and read/set/write the device control reset
- * bit in the PHY. Wait the appropriate delay time for the device to
- * reset and relase the semaphore (if necessary).
- **/
-s32 igb_phy_hw_reset(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u32 ctrl;
-
- ret_val = igb_check_reset_block(hw);
- if (ret_val) {
- ret_val = 0;
- goto out;
- }
-
- ret_val = phy->ops.acquire(hw);
- if (ret_val)
- goto out;
-
- ctrl = rd32(E1000_CTRL);
- wr32(E1000_CTRL, ctrl | E1000_CTRL_PHY_RST);
- wrfl();
-
- udelay(phy->reset_delay_us);
-
- wr32(E1000_CTRL, ctrl);
- wrfl();
-
- udelay(150);
-
- phy->ops.release(hw);
-
- ret_val = phy->ops.get_cfg_done(hw);
-
-out:
- return ret_val;
-}
-
-/**
- * igb_phy_init_script_igp3 - Inits the IGP3 PHY
- * @hw: pointer to the HW structure
- *
- * Initializes a Intel Gigabit PHY3 when an EEPROM is not present.
- **/
-s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
-{
- hw_dbg("Running IGP 3 PHY init script\n");
-
- /* PHY init IGP 3 */
- /* Enable rise/fall, 10-mode work in class-A */
- hw->phy.ops.write_reg(hw, 0x2F5B, 0x9018);
- /* Remove all caps from Replica path filter */
- hw->phy.ops.write_reg(hw, 0x2F52, 0x0000);
- /* Bias trimming for ADC, AFE and Driver (Default) */
- hw->phy.ops.write_reg(hw, 0x2FB1, 0x8B24);
- /* Increase Hybrid poly bias */
- hw->phy.ops.write_reg(hw, 0x2FB2, 0xF8F0);
- /* Add 4% to TX amplitude in Giga mode */
- hw->phy.ops.write_reg(hw, 0x2010, 0x10B0);
- /* Disable trimming (TTT) */
- hw->phy.ops.write_reg(hw, 0x2011, 0x0000);
- /* Poly DC correction to 94.6% + 2% for all channels */
- hw->phy.ops.write_reg(hw, 0x20DD, 0x249A);
- /* ABS DC correction to 95.9% */
- hw->phy.ops.write_reg(hw, 0x20DE, 0x00D3);
- /* BG temp curve trim */
- hw->phy.ops.write_reg(hw, 0x28B4, 0x04CE);
- /* Increasing ADC OPAMP stage 1 currents to max */
- hw->phy.ops.write_reg(hw, 0x2F70, 0x29E4);
- /* Force 1000 ( required for enabling PHY regs configuration) */
- hw->phy.ops.write_reg(hw, 0x0000, 0x0140);
- /* Set upd_freq to 6 */
- hw->phy.ops.write_reg(hw, 0x1F30, 0x1606);
- /* Disable NPDFE */
- hw->phy.ops.write_reg(hw, 0x1F31, 0xB814);
- /* Disable adaptive fixed FFE (Default) */
- hw->phy.ops.write_reg(hw, 0x1F35, 0x002A);
- /* Enable FFE hysteresis */
- hw->phy.ops.write_reg(hw, 0x1F3E, 0x0067);
- /* Fixed FFE for short cable lengths */
- hw->phy.ops.write_reg(hw, 0x1F54, 0x0065);
- /* Fixed FFE for medium cable lengths */
- hw->phy.ops.write_reg(hw, 0x1F55, 0x002A);
- /* Fixed FFE for long cable lengths */
- hw->phy.ops.write_reg(hw, 0x1F56, 0x002A);
- /* Enable Adaptive Clip Threshold */
- hw->phy.ops.write_reg(hw, 0x1F72, 0x3FB0);
- /* AHT reset limit to 1 */
- hw->phy.ops.write_reg(hw, 0x1F76, 0xC0FF);
- /* Set AHT master delay to 127 msec */
- hw->phy.ops.write_reg(hw, 0x1F77, 0x1DEC);
- /* Set scan bits for AHT */
- hw->phy.ops.write_reg(hw, 0x1F78, 0xF9EF);
- /* Set AHT Preset bits */
- hw->phy.ops.write_reg(hw, 0x1F79, 0x0210);
- /* Change integ_factor of channel A to 3 */
- hw->phy.ops.write_reg(hw, 0x1895, 0x0003);
- /* Change prop_factor of channels BCD to 8 */
- hw->phy.ops.write_reg(hw, 0x1796, 0x0008);
- /* Change cg_icount + enable integbp for channels BCD */
- hw->phy.ops.write_reg(hw, 0x1798, 0xD008);
- /*
- * Change cg_icount + enable integbp + change prop_factor_master
- * to 8 for channel A
- */
- hw->phy.ops.write_reg(hw, 0x1898, 0xD918);
- /* Disable AHT in Slave mode on channel A */
- hw->phy.ops.write_reg(hw, 0x187A, 0x0800);
- /*
- * Enable LPLU and disable AN to 1000 in non-D0a states,
- * Enable SPD+B2B
- */
- hw->phy.ops.write_reg(hw, 0x0019, 0x008D);
- /* Enable restart AN on an1000_dis change */
- hw->phy.ops.write_reg(hw, 0x001B, 0x2080);
- /* Enable wh_fifo read clock in 10/100 modes */
- hw->phy.ops.write_reg(hw, 0x0014, 0x0045);
- /* Restart AN, Speed selection is 1000 */
- hw->phy.ops.write_reg(hw, 0x0000, 0x1340);
-
- return 0;
-}
-
-/**
- * igb_power_up_phy_copper - Restore copper link in case of PHY power down
- * @hw: pointer to the HW structure
- *
- * In the case of a PHY power down to save power, or to turn off link during a
- * driver unload, restore the link to previous settings.
- **/
-void igb_power_up_phy_copper(struct e1000_hw *hw)
-{
- u16 mii_reg = 0;
-
- /* The PHY will retain its settings across a power down/up cycle */
- hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
- mii_reg &= ~MII_CR_POWER_DOWN;
- hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
-}
-
-/**
- * igb_power_down_phy_copper - Power down copper PHY
- * @hw: pointer to the HW structure
- *
- * Power down PHY to save power when interface is down and wake on lan
- * is not enabled.
- **/
-void igb_power_down_phy_copper(struct e1000_hw *hw)
-{
- u16 mii_reg = 0;
-
- /* The PHY will retain its settings across a power down/up cycle */
- hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
- mii_reg |= MII_CR_POWER_DOWN;
- hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
- msleep(1);
-}
-
-/**
- * igb_check_polarity_82580 - Checks the polarity.
- * @hw: pointer to the HW structure
- *
- * Success returns 0, Failure returns -E1000_ERR_PHY (-2)
- *
- * Polarity is determined based on the PHY specific status register.
- **/
-static s32 igb_check_polarity_82580(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
-
-
- ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
-
- if (!ret_val)
- phy->cable_polarity = (data & I82580_PHY_STATUS2_REV_POLARITY)
- ? e1000_rev_polarity_reversed
- : e1000_rev_polarity_normal;
-
- return ret_val;
-}
-
-/**
- * igb_phy_force_speed_duplex_82580 - Force speed/duplex for I82580 PHY
- * @hw: pointer to the HW structure
- *
- * Calls the PHY setup function to force speed and duplex. Clears the
- * auto-crossover to force MDI manually. Waits for link and returns
- * successful if link up is successful, else -E1000_ERR_PHY (-2).
- **/
-s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data;
- bool link;
-
-
- ret_val = phy->ops.read_reg(hw, PHY_CONTROL, &phy_data);
- if (ret_val)
- goto out;
-
- igb_phy_force_speed_duplex_setup(hw, &phy_data);
-
- ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
- if (ret_val)
- goto out;
-
- /*
- * Clear Auto-Crossover to force MDI manually. 82580 requires MDI
- * forced whenever speed and duplex are forced.
- */
- ret_val = phy->ops.read_reg(hw, I82580_PHY_CTRL_2, &phy_data);
- if (ret_val)
- goto out;
-
- phy_data &= ~I82580_PHY_CTRL2_AUTO_MDIX;
- phy_data &= ~I82580_PHY_CTRL2_FORCE_MDI_MDIX;
-
- ret_val = phy->ops.write_reg(hw, I82580_PHY_CTRL_2, phy_data);
- if (ret_val)
- goto out;
-
- hw_dbg("I82580_PHY_CTRL_2: %X\n", phy_data);
-
- udelay(1);
-
- if (phy->autoneg_wait_to_complete) {
- hw_dbg("Waiting for forced speed/duplex link on 82580 phy\n");
-
- ret_val = igb_phy_has_link(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
-
- if (!link)
- hw_dbg("Link taking longer than expected.\n");
-
- /* Try once more */
- ret_val = igb_phy_has_link(hw,
- PHY_FORCE_LIMIT,
- 100000,
- &link);
- if (ret_val)
- goto out;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_phy_info_82580 - Retrieve I82580 PHY information
- * @hw: pointer to the HW structure
- *
- * Read PHY status to determine if link is up. If link is up, then
- * set/determine 10base-T extended distance and polarity correction. Read
- * PHY port status to determine MDI/MDIx and speed. Based on the speed,
- * determine on the cable length, local and remote receiver.
- **/
-s32 igb_get_phy_info_82580(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 data;
- bool link;
-
-
- ret_val = igb_phy_has_link(hw, 1, 0, &link);
- if (ret_val)
- goto out;
-
- if (!link) {
- hw_dbg("Phy info is only valid if link is up\n");
- ret_val = -E1000_ERR_CONFIG;
- goto out;
- }
-
- phy->polarity_correction = true;
-
- ret_val = igb_check_polarity_82580(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, I82580_PHY_STATUS_2, &data);
- if (ret_val)
- goto out;
-
- phy->is_mdix = (data & I82580_PHY_STATUS2_MDIX) ? true : false;
-
- if ((data & I82580_PHY_STATUS2_SPEED_MASK) ==
- I82580_PHY_STATUS2_SPEED_1000MBPS) {
- ret_val = hw->phy.ops.get_cable_length(hw);
- if (ret_val)
- goto out;
-
- ret_val = phy->ops.read_reg(hw, PHY_1000T_STATUS, &data);
- if (ret_val)
- goto out;
-
- phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
-
- phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS)
- ? e1000_1000t_rx_status_ok
- : e1000_1000t_rx_status_not_ok;
- } else {
- phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED;
- phy->local_rx = e1000_1000t_rx_status_undefined;
- phy->remote_rx = e1000_1000t_rx_status_undefined;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * igb_get_cable_length_82580 - Determine cable length for 82580 PHY
- * @hw: pointer to the HW structure
- *
- * Reads the diagnostic status register and verifies result is valid before
- * placing it in the phy_cable_length field.
- **/
-s32 igb_get_cable_length_82580(struct e1000_hw *hw)
-{
- struct e1000_phy_info *phy = &hw->phy;
- s32 ret_val;
- u16 phy_data, length;
-
-
- ret_val = phy->ops.read_reg(hw, I82580_PHY_DIAG_STATUS, &phy_data);
- if (ret_val)
- goto out;
-
- length = (phy_data & I82580_DSTATUS_CABLE_LENGTH) >>
- I82580_DSTATUS_CABLE_LENGTH_SHIFT;
-
- if (length == E1000_CABLE_LENGTH_UNDEFINED)
- ret_val = -E1000_ERR_PHY;
-
- phy->cable_length = length;
-
-out:
- return ret_val;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_PHY_H_
-#define _E1000_PHY_H_
-
-enum e1000_ms_type {
- e1000_ms_hw_default = 0,
- e1000_ms_force_master,
- e1000_ms_force_slave,
- e1000_ms_auto
-};
-
-enum e1000_smart_speed {
- e1000_smart_speed_default = 0,
- e1000_smart_speed_on,
- e1000_smart_speed_off
-};
-
-s32 igb_check_downshift(struct e1000_hw *hw);
-s32 igb_check_reset_block(struct e1000_hw *hw);
-s32 igb_copper_link_setup_igp(struct e1000_hw *hw);
-s32 igb_copper_link_setup_m88(struct e1000_hw *hw);
-s32 igb_copper_link_setup_m88_gen2(struct e1000_hw *hw);
-s32 igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
-s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw);
-s32 igb_get_cable_length_m88(struct e1000_hw *hw);
-s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw);
-s32 igb_get_cable_length_igp_2(struct e1000_hw *hw);
-s32 igb_get_phy_id(struct e1000_hw *hw);
-s32 igb_get_phy_info_igp(struct e1000_hw *hw);
-s32 igb_get_phy_info_m88(struct e1000_hw *hw);
-s32 igb_phy_sw_reset(struct e1000_hw *hw);
-s32 igb_phy_hw_reset(struct e1000_hw *hw);
-s32 igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
-s32 igb_setup_copper_link(struct e1000_hw *hw);
-s32 igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
-s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
- u32 usec_interval, bool *success);
-void igb_power_up_phy_copper(struct e1000_hw *hw);
-void igb_power_down_phy_copper(struct e1000_hw *hw);
-s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
-s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
-s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
-s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
-s32 igb_copper_link_setup_82580(struct e1000_hw *hw);
-s32 igb_get_phy_info_82580(struct e1000_hw *hw);
-s32 igb_phy_force_speed_duplex_82580(struct e1000_hw *hw);
-s32 igb_get_cable_length_82580(struct e1000_hw *hw);
-
-/* IGP01E1000 Specific Registers */
-#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */
-#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */
-#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */
-#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */
-#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */
-#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */
-#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4
-#define IGP01E1000_PHY_POLARITY_MASK 0x0078
-#define IGP01E1000_PSCR_AUTO_MDIX 0x1000
-#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */
-#define IGP01E1000_PSCFR_SMART_SPEED 0x0080
-
-#define I82580_ADDR_REG 16
-#define I82580_CFG_REG 22
-#define I82580_CFG_ASSERT_CRS_ON_TX (1 << 15)
-#define I82580_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */
-#define I82580_CTRL_REG 23
-#define I82580_CTRL_DOWNSHIFT_MASK (7 << 10)
-
-/* 82580 specific PHY registers */
-#define I82580_PHY_CTRL_2 18
-#define I82580_PHY_LBK_CTRL 19
-#define I82580_PHY_STATUS_2 26
-#define I82580_PHY_DIAG_STATUS 31
-
-/* I82580 PHY Status 2 */
-#define I82580_PHY_STATUS2_REV_POLARITY 0x0400
-#define I82580_PHY_STATUS2_MDIX 0x0800
-#define I82580_PHY_STATUS2_SPEED_MASK 0x0300
-#define I82580_PHY_STATUS2_SPEED_1000MBPS 0x0200
-#define I82580_PHY_STATUS2_SPEED_100MBPS 0x0100
-
-/* I82580 PHY Control 2 */
-#define I82580_PHY_CTRL2_AUTO_MDIX 0x0400
-#define I82580_PHY_CTRL2_FORCE_MDI_MDIX 0x0200
-
-/* I82580 PHY Diagnostics Status */
-#define I82580_DSTATUS_CABLE_LENGTH 0x03FC
-#define I82580_DSTATUS_CABLE_LENGTH_SHIFT 2
-/* Enable flexible speed on link-up */
-#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */
-#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */
-#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000
-#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002
-#define IGP01E1000_PSSR_MDIX 0x0800
-#define IGP01E1000_PSSR_SPEED_MASK 0xC000
-#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000
-#define IGP02E1000_PHY_CHANNEL_NUM 4
-#define IGP02E1000_PHY_AGC_A 0x11B1
-#define IGP02E1000_PHY_AGC_B 0x12B1
-#define IGP02E1000_PHY_AGC_C 0x14B1
-#define IGP02E1000_PHY_AGC_D 0x18B1
-#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */
-#define IGP02E1000_AGC_LENGTH_MASK 0x7F
-#define IGP02E1000_AGC_RANGE 15
-
-#define E1000_CABLE_LENGTH_UNDEFINED 0xFF
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_REGS_H_
-#define _E1000_REGS_H_
-
-#define E1000_CTRL 0x00000 /* Device Control - RW */
-#define E1000_STATUS 0x00008 /* Device Status - RO */
-#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */
-#define E1000_EERD 0x00014 /* EEPROM Read - RW */
-#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */
-#define E1000_MDIC 0x00020 /* MDI Control - RW */
-#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */
-#define E1000_SCTL 0x00024 /* SerDes Control - RW */
-#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */
-#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */
-#define E1000_FCT 0x00030 /* Flow Control Type - RW */
-#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */
-#define E1000_VET 0x00038 /* VLAN Ether Type - RW */
-#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */
-#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */
-#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */
-#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */
-#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */
-#define E1000_RCTL 0x00100 /* RX Control - RW */
-#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */
-#define E1000_TXCW 0x00178 /* TX Configuration Word - RW */
-#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
-#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
-#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
-#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
-#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
-#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
-#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
-#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */
-#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
-#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
-#define E1000_TCTL 0x00400 /* TX Control - RW */
-#define E1000_TCTL_EXT 0x00404 /* Extended TX Control - RW */
-#define E1000_TIPG 0x00410 /* TX Inter-packet gap -RW */
-#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */
-#define E1000_LEDCTL 0x00E00 /* LED Control - RW */
-#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
-#define E1000_PBS 0x01008 /* Packet Buffer Size */
-#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
-#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
-#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
-#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
-#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */
-#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */
-#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */
-#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */
-
-/* IEEE 1588 TIMESYNCH */
-#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
-#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
-#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
-#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */
-#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */
-#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */
-#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */
-#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */
-#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */
-#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */
-#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */
-#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */
-#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */
-#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */
-
-/* Filtering Registers */
-#define E1000_SAQF(_n) (0x5980 + 4 * (_n))
-#define E1000_DAQF(_n) (0x59A0 + 4 * (_n))
-#define E1000_SPQF(_n) (0x59C0 + 4 * (_n))
-#define E1000_FTQF(_n) (0x59E0 + 4 * (_n))
-#define E1000_SAQF0 E1000_SAQF(0)
-#define E1000_DAQF0 E1000_DAQF(0)
-#define E1000_SPQF0 E1000_SPQF(0)
-#define E1000_FTQF0 E1000_FTQF(0)
-#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */
-#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
-
-#define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
-
-/* DMA Coalescing registers */
-#define E1000_DMACR 0x02508 /* Control Register */
-#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */
-#define E1000_DMCTLX 0x02514 /* Time to Lx Request */
-#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */
-#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */
-#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */
-#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
-
-/* TX Rate Limit Registers */
-#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select - WO */
-#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config - WO */
-
-/* Split and Replication RX Control - RW */
-#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */
-/*
- * Convenience macros
- *
- * Note: "_n" is the queue number of the register to be written to.
- *
- * Example usage:
- * E1000_RDBAL_REG(current_rx_queue)
- */
-#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) \
- : (0x0C000 + ((_n) * 0x40)))
-#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) \
- : (0x0C004 + ((_n) * 0x40)))
-#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) \
- : (0x0C008 + ((_n) * 0x40)))
-#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) \
- : (0x0C00C + ((_n) * 0x40)))
-#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) \
- : (0x0C010 + ((_n) * 0x40)))
-#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) \
- : (0x0C018 + ((_n) * 0x40)))
-#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) \
- : (0x0C028 + ((_n) * 0x40)))
-#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) \
- : (0x0E000 + ((_n) * 0x40)))
-#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) \
- : (0x0E004 + ((_n) * 0x40)))
-#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) \
- : (0x0E008 + ((_n) * 0x40)))
-#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) \
- : (0x0E010 + ((_n) * 0x40)))
-#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) \
- : (0x0E018 + ((_n) * 0x40)))
-#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) \
- : (0x0E028 + ((_n) * 0x40)))
-#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
-#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
-#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) \
- : (0x0E038 + ((_n) * 0x40)))
-#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) \
- : (0x0E03C + ((_n) * 0x40)))
-#define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */
-#define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */
-#define E1000_TDFHS 0x03420 /* TX Data FIFO Head Saved - RW */
-#define E1000_TDFPC 0x03430 /* TX Data FIFO Packet Count - RW */
-#define E1000_DTXCTL 0x03590 /* DMA TX Control - RW */
-#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */
-#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */
-#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */
-#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */
-#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */
-#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */
-#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */
-#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */
-#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */
-#define E1000_COLC 0x04028 /* Collision Count - R/clr */
-#define E1000_DC 0x04030 /* Defer Count - R/clr */
-#define E1000_TNCRS 0x04034 /* TX-No CRS - R/clr */
-#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */
-#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */
-#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */
-#define E1000_XONRXC 0x04048 /* XON RX Count - R/clr */
-#define E1000_XONTXC 0x0404C /* XON TX Count - R/clr */
-#define E1000_XOFFRXC 0x04050 /* XOFF RX Count - R/clr */
-#define E1000_XOFFTXC 0x04054 /* XOFF TX Count - R/clr */
-#define E1000_FCRUC 0x04058 /* Flow Control RX Unsupported Count- R/clr */
-#define E1000_PRC64 0x0405C /* Packets RX (64 bytes) - R/clr */
-#define E1000_PRC127 0x04060 /* Packets RX (65-127 bytes) - R/clr */
-#define E1000_PRC255 0x04064 /* Packets RX (128-255 bytes) - R/clr */
-#define E1000_PRC511 0x04068 /* Packets RX (255-511 bytes) - R/clr */
-#define E1000_PRC1023 0x0406C /* Packets RX (512-1023 bytes) - R/clr */
-#define E1000_PRC1522 0x04070 /* Packets RX (1024-1522 bytes) - R/clr */
-#define E1000_GPRC 0x04074 /* Good Packets RX Count - R/clr */
-#define E1000_BPRC 0x04078 /* Broadcast Packets RX Count - R/clr */
-#define E1000_MPRC 0x0407C /* Multicast Packets RX Count - R/clr */
-#define E1000_GPTC 0x04080 /* Good Packets TX Count - R/clr */
-#define E1000_GORCL 0x04088 /* Good Octets RX Count Low - R/clr */
-#define E1000_GORCH 0x0408C /* Good Octets RX Count High - R/clr */
-#define E1000_GOTCL 0x04090 /* Good Octets TX Count Low - R/clr */
-#define E1000_GOTCH 0x04094 /* Good Octets TX Count High - R/clr */
-#define E1000_RNBC 0x040A0 /* RX No Buffers Count - R/clr */
-#define E1000_RUC 0x040A4 /* RX Undersize Count - R/clr */
-#define E1000_RFC 0x040A8 /* RX Fragment Count - R/clr */
-#define E1000_ROC 0x040AC /* RX Oversize Count - R/clr */
-#define E1000_RJC 0x040B0 /* RX Jabber Count - R/clr */
-#define E1000_MGTPRC 0x040B4 /* Management Packets RX Count - R/clr */
-#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */
-#define E1000_MGTPTC 0x040BC /* Management Packets TX Count - R/clr */
-#define E1000_TORL 0x040C0 /* Total Octets RX Low - R/clr */
-#define E1000_TORH 0x040C4 /* Total Octets RX High - R/clr */
-#define E1000_TOTL 0x040C8 /* Total Octets TX Low - R/clr */
-#define E1000_TOTH 0x040CC /* Total Octets TX High - R/clr */
-#define E1000_TPR 0x040D0 /* Total Packets RX - R/clr */
-#define E1000_TPT 0x040D4 /* Total Packets TX - R/clr */
-#define E1000_PTC64 0x040D8 /* Packets TX (64 bytes) - R/clr */
-#define E1000_PTC127 0x040DC /* Packets TX (65-127 bytes) - R/clr */
-#define E1000_PTC255 0x040E0 /* Packets TX (128-255 bytes) - R/clr */
-#define E1000_PTC511 0x040E4 /* Packets TX (256-511 bytes) - R/clr */
-#define E1000_PTC1023 0x040E8 /* Packets TX (512-1023 bytes) - R/clr */
-#define E1000_PTC1522 0x040EC /* Packets TX (1024-1522 Bytes) - R/clr */
-#define E1000_MPTC 0x040F0 /* Multicast Packets TX Count - R/clr */
-#define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */
-#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */
-#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */
-#define E1000_IAC 0x04100 /* Interrupt Assertion Count */
-/* Interrupt Cause Rx Packet Timer Expire Count */
-#define E1000_ICRXPTC 0x04104
-/* Interrupt Cause Rx Absolute Timer Expire Count */
-#define E1000_ICRXATC 0x04108
-/* Interrupt Cause Tx Packet Timer Expire Count */
-#define E1000_ICTXPTC 0x0410C
-/* Interrupt Cause Tx Absolute Timer Expire Count */
-#define E1000_ICTXATC 0x04110
-/* Interrupt Cause Tx Queue Empty Count */
-#define E1000_ICTXQEC 0x04118
-/* Interrupt Cause Tx Queue Minimum Threshold Count */
-#define E1000_ICTXQMTC 0x0411C
-/* Interrupt Cause Rx Descriptor Minimum Threshold Count */
-#define E1000_ICRXDMTC 0x04120
-#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */
-#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */
-#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */
-#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */
-#define E1000_CBTMPC 0x0402C /* Circuit Breaker TX Packet Count */
-#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */
-#define E1000_CBRMPC 0x040FC /* Circuit Breaker RX Packet Count */
-#define E1000_RPTHC 0x04104 /* Rx Packets To Host */
-#define E1000_HGPTC 0x04118 /* Host Good Packets TX Count */
-#define E1000_HTCBDPC 0x04124 /* Host TX Circuit Breaker Dropped Count */
-#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */
-#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */
-#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */
-#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */
-#define E1000_LENERRS 0x04138 /* Length Errors Count */
-#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */
-#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */
-#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */
-#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */
-#define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Page - RW */
-#define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */
-#define E1000_RLPML 0x05004 /* RX Long Packet Max Length */
-#define E1000_RFCTL 0x05008 /* Receive Filter Control*/
-#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
-#define E1000_RA 0x05400 /* Receive Address - RW Array */
-#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */
-#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
-#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
- (0x054E0 + ((_i - 16) * 8)))
-#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
- (0x054E4 + ((_i - 16) * 8)))
-#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
-#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
-#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
-#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
-#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
-#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
-#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
-#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
-#define E1000_WUC 0x05800 /* Wakeup Control - RW */
-#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */
-#define E1000_WUS 0x05810 /* Wakeup Status - RO */
-#define E1000_MANC 0x05820 /* Management Control - RW */
-#define E1000_IPAV 0x05838 /* IP Address Valid - RW */
-#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */
-
-#define E1000_SW_FW_SYNC 0x05B5C /* Software-Firmware Synchronization - RW */
-#define E1000_CCMCTL 0x05B48 /* CCM Control Register */
-#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */
-#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */
-#define E1000_GCR 0x05B00 /* PCI-Ex Control */
-#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */
-#define E1000_SWSM 0x05B50 /* SW Semaphore */
-#define E1000_FWSM 0x05B54 /* FW Semaphore */
-#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */
-
-/* RSS registers */
-#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */
-#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */
-#define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate Interrupt Ext*/
-#define E1000_IMIRVP 0x05AC0 /* Immediate Interrupt RX VLAN Priority - RW */
-/* MSI-X Allocation Register (_i) - RW */
-#define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4))
-/* Redirection Table - RW Array */
-#define E1000_RETA(_i) (0x05C00 + ((_i) * 4))
-#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW Array */
-
-/* VT Registers */
-#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */
-#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */
-#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */
-#define E1000_VFRE 0x00C8C /* VF Receive Enables */
-#define E1000_VFTE 0x00C90 /* VF Transmit Enables */
-#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */
-#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */
-#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */
-#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */
-#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */
-#define E1000_IOVTCL 0x05BBC /* IOV Control Register */
-/* These act per VF so an array friendly macro is used */
-#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n)))
-#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
-#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n)))
-#define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) /* VLAN Virtual Machine
- * Filter - RW */
-#define E1000_VMVIR(_n) (0x03700 + (4 * (_n)))
-
-#define wr32(reg, value) (writel(value, hw->hw_addr + reg))
-#define rd32(reg) (readl(hw->hw_addr + reg))
-#define wrfl() ((void)rd32(E1000_STATUS))
-
-#define array_wr32(reg, offset, value) \
- (writel(value, hw->hw_addr + reg + ((offset) << 2)))
-#define array_rd32(reg, offset) \
- (readl(hw->hw_addr + reg + ((offset) << 2)))
-
-/* DMA Coalescing registers */
-#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */
-
-/* Energy Efficient Ethernet "EEE" register */
-#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */
-#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet */
-
-/* Thermal Sensor Register */
-#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */
-
-/* OS2BMC Registers */
-#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */
-#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */
-#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */
-#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/* Linux PRO/1000 Ethernet Driver main header file */
-
-#ifndef _IGB_H_
-#define _IGB_H_
-
-#include "e1000_mac.h"
-#include "e1000_82575.h"
-
-#include <linux/clocksource.h>
-#include <linux/timecompare.h>
-#include <linux/net_tstamp.h>
-#include <linux/bitops.h>
-#include <linux/if_vlan.h>
-
-struct igb_adapter;
-
-/* ((1000000000ns / (6000ints/s * 1024ns)) << 2 = 648 */
-#define IGB_START_ITR 648
-
-/* TX/RX descriptor defines */
-#define IGB_DEFAULT_TXD 256
-#define IGB_MIN_TXD 80
-#define IGB_MAX_TXD 4096
-
-#define IGB_DEFAULT_RXD 256
-#define IGB_MIN_RXD 80
-#define IGB_MAX_RXD 4096
-
-#define IGB_DEFAULT_ITR 3 /* dynamic */
-#define IGB_MAX_ITR_USECS 10000
-#define IGB_MIN_ITR_USECS 10
-#define NON_Q_VECTORS 1
-#define MAX_Q_VECTORS 8
-
-/* Transmit and receive queues */
-#define IGB_MAX_RX_QUEUES (adapter->vfs_allocated_count ? 2 : \
- (hw->mac.type > e1000_82575 ? 8 : 4))
-#define IGB_ABS_MAX_TX_QUEUES 8
-#define IGB_MAX_TX_QUEUES IGB_MAX_RX_QUEUES
-
-#define IGB_MAX_VF_MC_ENTRIES 30
-#define IGB_MAX_VF_FUNCTIONS 8
-#define IGB_MAX_VFTA_ENTRIES 128
-
-struct vf_data_storage {
- unsigned char vf_mac_addresses[ETH_ALEN];
- u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
- u16 num_vf_mc_hashes;
- u16 vlans_enabled;
- u32 flags;
- unsigned long last_nack;
- u16 pf_vlan; /* When set, guest VLAN config not allowed. */
- u16 pf_qos;
- u16 tx_rate;
-};
-
-#define IGB_VF_FLAG_CTS 0x00000001 /* VF is clear to send data */
-#define IGB_VF_FLAG_UNI_PROMISC 0x00000002 /* VF has unicast promisc */
-#define IGB_VF_FLAG_MULTI_PROMISC 0x00000004 /* VF has multicast promisc */
-#define IGB_VF_FLAG_PF_SET_MAC 0x00000008 /* PF has set MAC address */
-
-/* RX descriptor control thresholds.
- * PTHRESH - MAC will consider prefetch if it has fewer than this number of
- * descriptors available in its onboard memory.
- * Setting this to 0 disables RX descriptor prefetch.
- * HTHRESH - MAC will only prefetch if there are at least this many descriptors
- * available in host memory.
- * If PTHRESH is 0, this should also be 0.
- * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
- * descriptors until either it has this many to write back, or the
- * ITR timer expires.
- */
-#define IGB_RX_PTHRESH 8
-#define IGB_RX_HTHRESH 8
-#define IGB_RX_WTHRESH 1
-#define IGB_TX_PTHRESH 8
-#define IGB_TX_HTHRESH 1
-#define IGB_TX_WTHRESH ((hw->mac.type == e1000_82576 && \
- adapter->msix_entries) ? 1 : 16)
-
-/* this is the size past which hardware will drop packets when setting LPE=0 */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
-
-/* Supported Rx Buffer Sizes */
-#define IGB_RXBUFFER_64 64 /* Used for packet split */
-#define IGB_RXBUFFER_128 128 /* Used for packet split */
-#define IGB_RXBUFFER_1024 1024
-#define IGB_RXBUFFER_2048 2048
-#define IGB_RXBUFFER_16384 16384
-
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
-
-/* How many Tx Descriptors do we need to call netif_wake_queue ? */
-#define IGB_TX_QUEUE_WAKE 16
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define AUTO_ALL_MODES 0
-#define IGB_EEPROM_APME 0x0400
-
-#ifndef IGB_MASTER_SLAVE
-/* Switch to override PHY master/slave setting */
-#define IGB_MASTER_SLAVE e1000_ms_hw_default
-#endif
-
-#define IGB_MNG_VLAN_NONE -1
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct igb_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- union {
- /* TX */
- struct {
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- unsigned int bytecount;
- u16 gso_segs;
- u8 tx_flags;
- u8 mapped_as_page;
- };
- /* RX */
- struct {
- struct page *page;
- dma_addr_t page_dma;
- u16 page_offset;
- };
- };
-};
-
-struct igb_tx_queue_stats {
- u64 packets;
- u64 bytes;
- u64 restart_queue;
- u64 restart_queue2;
-};
-
-struct igb_rx_queue_stats {
- u64 packets;
- u64 bytes;
- u64 drops;
- u64 csum_err;
- u64 alloc_failed;
-};
-
-struct igb_q_vector {
- struct igb_adapter *adapter; /* backlink */
- struct igb_ring *rx_ring;
- struct igb_ring *tx_ring;
- struct napi_struct napi;
-
- u32 eims_value;
- u16 cpu;
-
- u16 itr_val;
- u8 set_itr;
- void __iomem *itr_register;
-
- char name[IFNAMSIZ + 9];
-};
-
-struct igb_ring {
- struct igb_q_vector *q_vector; /* backlink to q_vector */
- struct net_device *netdev; /* back pointer to net_device */
- struct device *dev; /* device pointer for dma mapping */
- dma_addr_t dma; /* phys address of the ring */
- void *desc; /* descriptor ring memory */
- unsigned int size; /* length of desc. ring in bytes */
- u16 count; /* number of desc. in the ring */
- u16 next_to_use;
- u16 next_to_clean;
- u8 queue_index;
- u8 reg_idx;
- void __iomem *head;
- void __iomem *tail;
- struct igb_buffer *buffer_info; /* array of buffer info structs */
-
- unsigned int total_bytes;
- unsigned int total_packets;
-
- u32 flags;
-
- union {
- /* TX */
- struct {
- struct igb_tx_queue_stats tx_stats;
- struct u64_stats_sync tx_syncp;
- struct u64_stats_sync tx_syncp2;
- bool detect_tx_hung;
- };
- /* RX */
- struct {
- struct igb_rx_queue_stats rx_stats;
- struct u64_stats_sync rx_syncp;
- u32 rx_buffer_len;
- };
- };
-};
-
-#define IGB_RING_FLAG_RX_CSUM 0x00000001 /* RX CSUM enabled */
-#define IGB_RING_FLAG_RX_SCTP_CSUM 0x00000002 /* SCTP CSUM offload enabled */
-
-#define IGB_RING_FLAG_TX_CTX_IDX 0x00000001 /* HW requires context index */
-
-#define IGB_ADVTXD_DCMD (E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS)
-
-#define E1000_RX_DESC_ADV(R, i) \
- (&(((union e1000_adv_rx_desc *)((R).desc))[i]))
-#define E1000_TX_DESC_ADV(R, i) \
- (&(((union e1000_adv_tx_desc *)((R).desc))[i]))
-#define E1000_TX_CTXTDESC_ADV(R, i) \
- (&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
-
-/* igb_desc_unused - calculate if we have unused descriptors */
-static inline int igb_desc_unused(struct igb_ring *ring)
-{
- if (ring->next_to_clean > ring->next_to_use)
- return ring->next_to_clean - ring->next_to_use - 1;
-
- return ring->count + ring->next_to_clean - ring->next_to_use - 1;
-}
-
-/* board specific private data structure */
-struct igb_adapter {
- struct timer_list watchdog_timer;
- struct timer_list phy_info_timer;
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u16 mng_vlan_id;
- u32 bd_number;
- u32 wol;
- u32 en_mng_pt;
- u16 link_speed;
- u16 link_duplex;
-
- /* Interrupt Throttle Rate */
- u32 rx_itr_setting;
- u32 tx_itr_setting;
- u16 tx_itr;
- u16 rx_itr;
-
- struct work_struct reset_task;
- struct work_struct watchdog_task;
- bool fc_autoneg;
- u8 tx_timeout_factor;
- struct timer_list blink_timer;
- unsigned long led_status;
-
- /* TX */
- struct igb_ring *tx_ring[16];
- u32 tx_timeout_count;
-
- /* RX */
- struct igb_ring *rx_ring[16];
- int num_tx_queues;
- int num_rx_queues;
-
- u32 max_frame_size;
- u32 min_frame_size;
-
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
- struct cyclecounter cycles;
- struct timecounter clock;
- struct timecompare compare;
- struct hwtstamp_config hwtstamp_config;
-
- spinlock_t stats64_lock;
- struct rtnl_link_stats64 stats64;
-
- /* structs defined in e1000_hw.h */
- struct e1000_hw hw;
- struct e1000_hw_stats stats;
- struct e1000_phy_info phy_info;
- struct e1000_phy_stats phy_stats;
-
- u32 test_icr;
- struct igb_ring test_tx_ring;
- struct igb_ring test_rx_ring;
-
- int msg_enable;
-
- unsigned int num_q_vectors;
- struct igb_q_vector *q_vector[MAX_Q_VECTORS];
- struct msix_entry *msix_entries;
- u32 eims_enable_mask;
- u32 eims_other;
-
- /* to not mess up cache alignment, always add to the bottom */
- unsigned long state;
- unsigned int flags;
- u32 eeprom_wol;
-
- struct igb_ring *multi_tx_table[IGB_ABS_MAX_TX_QUEUES];
- u16 tx_ring_count;
- u16 rx_ring_count;
- unsigned int vfs_allocated_count;
- struct vf_data_storage *vf_data;
- int vf_rate_link_speed;
- u32 rss_queues;
- u32 wvbr;
-};
-
-#define IGB_FLAG_HAS_MSI (1 << 0)
-#define IGB_FLAG_DCA_ENABLED (1 << 1)
-#define IGB_FLAG_QUAD_PORT_A (1 << 2)
-#define IGB_FLAG_QUEUE_PAIRS (1 << 3)
-#define IGB_FLAG_DMAC (1 << 4)
-
-/* DMA Coalescing defines */
-#define IGB_MIN_TXPBSIZE 20408
-#define IGB_TX_BUF_4096 4096
-#define IGB_DMCTLX_DCFLUSH_DIS 0x80000000 /* Disable DMA Coal Flush */
-
-#define IGB_82576_TSYNC_SHIFT 19
-#define IGB_82580_TSYNC_SHIFT 24
-#define IGB_TS_HDR_LEN 16
-enum e1000_state_t {
- __IGB_TESTING,
- __IGB_RESETTING,
- __IGB_DOWN
-};
-
-enum igb_boards {
- board_82575,
-};
-
-extern char igb_driver_name[];
-extern char igb_driver_version[];
-
-extern int igb_up(struct igb_adapter *);
-extern void igb_down(struct igb_adapter *);
-extern void igb_reinit_locked(struct igb_adapter *);
-extern void igb_reset(struct igb_adapter *);
-extern int igb_set_spd_dplx(struct igb_adapter *, u32, u8);
-extern int igb_setup_tx_resources(struct igb_ring *);
-extern int igb_setup_rx_resources(struct igb_ring *);
-extern void igb_free_tx_resources(struct igb_ring *);
-extern void igb_free_rx_resources(struct igb_ring *);
-extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
-extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
-extern void igb_setup_tctl(struct igb_adapter *);
-extern void igb_setup_rctl(struct igb_adapter *);
-extern netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *, struct igb_ring *);
-extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
- struct igb_buffer *);
-extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
-extern void igb_update_stats(struct igb_adapter *, struct rtnl_link_stats64 *);
-extern bool igb_has_link(struct igb_adapter *adapter);
-extern void igb_set_ethtool_ops(struct net_device *);
-extern void igb_power_up_link(struct igb_adapter *);
-
-static inline s32 igb_reset_phy(struct e1000_hw *hw)
-{
- if (hw->phy.ops.reset)
- return hw->phy.ops.reset(hw);
-
- return 0;
-}
-
-static inline s32 igb_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data)
-{
- if (hw->phy.ops.read_reg)
- return hw->phy.ops.read_reg(hw, offset, data);
-
- return 0;
-}
-
-static inline s32 igb_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data)
-{
- if (hw->phy.ops.write_reg)
- return hw->phy.ops.write_reg(hw, offset, data);
-
- return 0;
-}
-
-static inline s32 igb_get_phy_info(struct e1000_hw *hw)
-{
- if (hw->phy.ops.get_phy_info)
- return hw->phy.ops.get_phy_info(hw);
-
- return 0;
-}
-
-#endif /* _IGB_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for igb */
-
-#include <linux/vmalloc.h>
-#include <linux/netdevice.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/ethtool.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include "igb.h"
-
-struct igb_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
-};
-
-#define IGB_STAT(_name, _stat) { \
- .stat_string = _name, \
- .sizeof_stat = FIELD_SIZEOF(struct igb_adapter, _stat), \
- .stat_offset = offsetof(struct igb_adapter, _stat) \
-}
-static const struct igb_stats igb_gstrings_stats[] = {
- IGB_STAT("rx_packets", stats.gprc),
- IGB_STAT("tx_packets", stats.gptc),
- IGB_STAT("rx_bytes", stats.gorc),
- IGB_STAT("tx_bytes", stats.gotc),
- IGB_STAT("rx_broadcast", stats.bprc),
- IGB_STAT("tx_broadcast", stats.bptc),
- IGB_STAT("rx_multicast", stats.mprc),
- IGB_STAT("tx_multicast", stats.mptc),
- IGB_STAT("multicast", stats.mprc),
- IGB_STAT("collisions", stats.colc),
- IGB_STAT("rx_crc_errors", stats.crcerrs),
- IGB_STAT("rx_no_buffer_count", stats.rnbc),
- IGB_STAT("rx_missed_errors", stats.mpc),
- IGB_STAT("tx_aborted_errors", stats.ecol),
- IGB_STAT("tx_carrier_errors", stats.tncrs),
- IGB_STAT("tx_window_errors", stats.latecol),
- IGB_STAT("tx_abort_late_coll", stats.latecol),
- IGB_STAT("tx_deferred_ok", stats.dc),
- IGB_STAT("tx_single_coll_ok", stats.scc),
- IGB_STAT("tx_multi_coll_ok", stats.mcc),
- IGB_STAT("tx_timeout_count", tx_timeout_count),
- IGB_STAT("rx_long_length_errors", stats.roc),
- IGB_STAT("rx_short_length_errors", stats.ruc),
- IGB_STAT("rx_align_errors", stats.algnerrc),
- IGB_STAT("tx_tcp_seg_good", stats.tsctc),
- IGB_STAT("tx_tcp_seg_failed", stats.tsctfc),
- IGB_STAT("rx_flow_control_xon", stats.xonrxc),
- IGB_STAT("rx_flow_control_xoff", stats.xoffrxc),
- IGB_STAT("tx_flow_control_xon", stats.xontxc),
- IGB_STAT("tx_flow_control_xoff", stats.xofftxc),
- IGB_STAT("rx_long_byte_count", stats.gorc),
- IGB_STAT("tx_dma_out_of_sync", stats.doosync),
- IGB_STAT("tx_smbus", stats.mgptc),
- IGB_STAT("rx_smbus", stats.mgprc),
- IGB_STAT("dropped_smbus", stats.mgpdc),
- IGB_STAT("os2bmc_rx_by_bmc", stats.o2bgptc),
- IGB_STAT("os2bmc_tx_by_bmc", stats.b2ospc),
- IGB_STAT("os2bmc_tx_by_host", stats.o2bspc),
- IGB_STAT("os2bmc_rx_by_host", stats.b2ogprc),
-};
-
-#define IGB_NETDEV_STAT(_net_stat) { \
- .stat_string = __stringify(_net_stat), \
- .sizeof_stat = FIELD_SIZEOF(struct rtnl_link_stats64, _net_stat), \
- .stat_offset = offsetof(struct rtnl_link_stats64, _net_stat) \
-}
-static const struct igb_stats igb_gstrings_net_stats[] = {
- IGB_NETDEV_STAT(rx_errors),
- IGB_NETDEV_STAT(tx_errors),
- IGB_NETDEV_STAT(tx_dropped),
- IGB_NETDEV_STAT(rx_length_errors),
- IGB_NETDEV_STAT(rx_over_errors),
- IGB_NETDEV_STAT(rx_frame_errors),
- IGB_NETDEV_STAT(rx_fifo_errors),
- IGB_NETDEV_STAT(tx_fifo_errors),
- IGB_NETDEV_STAT(tx_heartbeat_errors)
-};
-
-#define IGB_GLOBAL_STATS_LEN \
- (sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
-#define IGB_NETDEV_STATS_LEN \
- (sizeof(igb_gstrings_net_stats) / sizeof(struct igb_stats))
-#define IGB_RX_QUEUE_STATS_LEN \
- (sizeof(struct igb_rx_queue_stats) / sizeof(u64))
-
-#define IGB_TX_QUEUE_STATS_LEN 3 /* packets, bytes, restart_queue */
-
-#define IGB_QUEUE_STATS_LEN \
- ((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
- IGB_RX_QUEUE_STATS_LEN) + \
- (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
- IGB_TX_QUEUE_STATS_LEN))
-#define IGB_STATS_LEN \
- (IGB_GLOBAL_STATS_LEN + IGB_NETDEV_STATS_LEN + IGB_QUEUE_STATS_LEN)
-
-static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
- "Register test (offline)", "Eeprom test (offline)",
- "Interrupt test (offline)", "Loopback test (offline)",
- "Link test (on/offline)"
-};
-#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
-
-static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 status;
-
- if (hw->phy.media_type == e1000_media_type_copper) {
-
- ecmd->supported = (SUPPORTED_10baseT_Half |
- SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full|
- SUPPORTED_Autoneg |
- SUPPORTED_TP);
- ecmd->advertising = ADVERTISED_TP;
-
- if (hw->mac.autoneg == 1) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- /* the e1000 autoneg seems to match ethtool nicely */
- ecmd->advertising |= hw->phy.autoneg_advertised;
- }
-
- ecmd->port = PORT_TP;
- ecmd->phy_address = hw->phy.addr;
- } else {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE |
- SUPPORTED_Autoneg);
-
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE |
- ADVERTISED_Autoneg);
-
- ecmd->port = PORT_FIBRE;
- }
-
- ecmd->transceiver = XCVR_INTERNAL;
-
- status = rd32(E1000_STATUS);
-
- if (status & E1000_STATUS_LU) {
-
- if ((status & E1000_STATUS_SPEED_1000) ||
- hw->phy.media_type != e1000_media_type_copper)
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- else if (status & E1000_STATUS_SPEED_100)
- ethtool_cmd_speed_set(ecmd, SPEED_100);
- else
- ethtool_cmd_speed_set(ecmd, SPEED_10);
-
- if ((status & E1000_STATUS_FD) ||
- hw->phy.media_type != e1000_media_type_copper)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- ecmd->autoneg = hw->mac.autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE;
- return 0;
-}
-
-static int igb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- /* When SoL/IDER sessions are active, autoneg/speed/duplex
- * cannot be changed */
- if (igb_check_reset_block(hw)) {
- dev_err(&adapter->pdev->dev, "Cannot change link "
- "characteristics when SoL/IDER is active.\n");
- return -EINVAL;
- }
-
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
-
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- hw->mac.autoneg = 1;
- hw->phy.autoneg_advertised = ecmd->advertising |
- ADVERTISED_TP |
- ADVERTISED_Autoneg;
- ecmd->advertising = hw->phy.autoneg_advertised;
- if (adapter->fc_autoneg)
- hw->fc.requested_mode = e1000_fc_default;
- } else {
- u32 speed = ethtool_cmd_speed(ecmd);
- if (igb_set_spd_dplx(adapter, speed, ecmd->duplex)) {
- clear_bit(__IGB_RESETTING, &adapter->state);
- return -EINVAL;
- }
- }
-
- /* reset the link */
- if (netif_running(adapter->netdev)) {
- igb_down(adapter);
- igb_up(adapter);
- } else
- igb_reset(adapter);
-
- clear_bit(__IGB_RESETTING, &adapter->state);
- return 0;
-}
-
-static u32 igb_get_link(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_mac_info *mac = &adapter->hw.mac;
-
- /*
- * If the link is not reported up to netdev, interrupts are disabled,
- * and so the physical link state may have changed since we last
- * looked. Set get_link_status to make sure that the true link
- * state is interrogated, rather than pulling a cached and possibly
- * stale link state from the driver.
- */
- if (!netif_carrier_ok(netdev))
- mac->get_link_status = 1;
-
- return igb_has_link(adapter);
-}
-
-static void igb_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- pause->autoneg =
- (adapter->fc_autoneg ? AUTONEG_ENABLE : AUTONEG_DISABLE);
-
- if (hw->fc.current_mode == e1000_fc_rx_pause)
- pause->rx_pause = 1;
- else if (hw->fc.current_mode == e1000_fc_tx_pause)
- pause->tx_pause = 1;
- else if (hw->fc.current_mode == e1000_fc_full) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
- }
-}
-
-static int igb_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int retval = 0;
-
- adapter->fc_autoneg = pause->autoneg;
-
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
-
- if (adapter->fc_autoneg == AUTONEG_ENABLE) {
- hw->fc.requested_mode = e1000_fc_default;
- if (netif_running(adapter->netdev)) {
- igb_down(adapter);
- igb_up(adapter);
- } else {
- igb_reset(adapter);
- }
- } else {
- if (pause->rx_pause && pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc.requested_mode = e1000_fc_none;
-
- hw->fc.current_mode = hw->fc.requested_mode;
-
- retval = ((hw->phy.media_type == e1000_media_type_copper) ?
- igb_force_mac_fc(hw) : igb_setup_link(hw));
- }
-
- clear_bit(__IGB_RESETTING, &adapter->state);
- return retval;
-}
-
-static u32 igb_get_msglevel(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void igb_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-static int igb_get_regs_len(struct net_device *netdev)
-{
-#define IGB_REGS_LEN 551
- return IGB_REGS_LEN * sizeof(u32);
-}
-
-static void igb_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
- u8 i;
-
- memset(p, 0, IGB_REGS_LEN * sizeof(u32));
-
- regs->version = (1 << 24) | (hw->revision_id << 16) | hw->device_id;
-
- /* General Registers */
- regs_buff[0] = rd32(E1000_CTRL);
- regs_buff[1] = rd32(E1000_STATUS);
- regs_buff[2] = rd32(E1000_CTRL_EXT);
- regs_buff[3] = rd32(E1000_MDIC);
- regs_buff[4] = rd32(E1000_SCTL);
- regs_buff[5] = rd32(E1000_CONNSW);
- regs_buff[6] = rd32(E1000_VET);
- regs_buff[7] = rd32(E1000_LEDCTL);
- regs_buff[8] = rd32(E1000_PBA);
- regs_buff[9] = rd32(E1000_PBS);
- regs_buff[10] = rd32(E1000_FRTIMER);
- regs_buff[11] = rd32(E1000_TCPTIMER);
-
- /* NVM Register */
- regs_buff[12] = rd32(E1000_EECD);
-
- /* Interrupt */
- /* Reading EICS for EICR because they read the
- * same but EICS does not clear on read */
- regs_buff[13] = rd32(E1000_EICS);
- regs_buff[14] = rd32(E1000_EICS);
- regs_buff[15] = rd32(E1000_EIMS);
- regs_buff[16] = rd32(E1000_EIMC);
- regs_buff[17] = rd32(E1000_EIAC);
- regs_buff[18] = rd32(E1000_EIAM);
- /* Reading ICS for ICR because they read the
- * same but ICS does not clear on read */
- regs_buff[19] = rd32(E1000_ICS);
- regs_buff[20] = rd32(E1000_ICS);
- regs_buff[21] = rd32(E1000_IMS);
- regs_buff[22] = rd32(E1000_IMC);
- regs_buff[23] = rd32(E1000_IAC);
- regs_buff[24] = rd32(E1000_IAM);
- regs_buff[25] = rd32(E1000_IMIRVP);
-
- /* Flow Control */
- regs_buff[26] = rd32(E1000_FCAL);
- regs_buff[27] = rd32(E1000_FCAH);
- regs_buff[28] = rd32(E1000_FCTTV);
- regs_buff[29] = rd32(E1000_FCRTL);
- regs_buff[30] = rd32(E1000_FCRTH);
- regs_buff[31] = rd32(E1000_FCRTV);
-
- /* Receive */
- regs_buff[32] = rd32(E1000_RCTL);
- regs_buff[33] = rd32(E1000_RXCSUM);
- regs_buff[34] = rd32(E1000_RLPML);
- regs_buff[35] = rd32(E1000_RFCTL);
- regs_buff[36] = rd32(E1000_MRQC);
- regs_buff[37] = rd32(E1000_VT_CTL);
-
- /* Transmit */
- regs_buff[38] = rd32(E1000_TCTL);
- regs_buff[39] = rd32(E1000_TCTL_EXT);
- regs_buff[40] = rd32(E1000_TIPG);
- regs_buff[41] = rd32(E1000_DTXCTL);
-
- /* Wake Up */
- regs_buff[42] = rd32(E1000_WUC);
- regs_buff[43] = rd32(E1000_WUFC);
- regs_buff[44] = rd32(E1000_WUS);
- regs_buff[45] = rd32(E1000_IPAV);
- regs_buff[46] = rd32(E1000_WUPL);
-
- /* MAC */
- regs_buff[47] = rd32(E1000_PCS_CFG0);
- regs_buff[48] = rd32(E1000_PCS_LCTL);
- regs_buff[49] = rd32(E1000_PCS_LSTAT);
- regs_buff[50] = rd32(E1000_PCS_ANADV);
- regs_buff[51] = rd32(E1000_PCS_LPAB);
- regs_buff[52] = rd32(E1000_PCS_NPTX);
- regs_buff[53] = rd32(E1000_PCS_LPABNP);
-
- /* Statistics */
- regs_buff[54] = adapter->stats.crcerrs;
- regs_buff[55] = adapter->stats.algnerrc;
- regs_buff[56] = adapter->stats.symerrs;
- regs_buff[57] = adapter->stats.rxerrc;
- regs_buff[58] = adapter->stats.mpc;
- regs_buff[59] = adapter->stats.scc;
- regs_buff[60] = adapter->stats.ecol;
- regs_buff[61] = adapter->stats.mcc;
- regs_buff[62] = adapter->stats.latecol;
- regs_buff[63] = adapter->stats.colc;
- regs_buff[64] = adapter->stats.dc;
- regs_buff[65] = adapter->stats.tncrs;
- regs_buff[66] = adapter->stats.sec;
- regs_buff[67] = adapter->stats.htdpmc;
- regs_buff[68] = adapter->stats.rlec;
- regs_buff[69] = adapter->stats.xonrxc;
- regs_buff[70] = adapter->stats.xontxc;
- regs_buff[71] = adapter->stats.xoffrxc;
- regs_buff[72] = adapter->stats.xofftxc;
- regs_buff[73] = adapter->stats.fcruc;
- regs_buff[74] = adapter->stats.prc64;
- regs_buff[75] = adapter->stats.prc127;
- regs_buff[76] = adapter->stats.prc255;
- regs_buff[77] = adapter->stats.prc511;
- regs_buff[78] = adapter->stats.prc1023;
- regs_buff[79] = adapter->stats.prc1522;
- regs_buff[80] = adapter->stats.gprc;
- regs_buff[81] = adapter->stats.bprc;
- regs_buff[82] = adapter->stats.mprc;
- regs_buff[83] = adapter->stats.gptc;
- regs_buff[84] = adapter->stats.gorc;
- regs_buff[86] = adapter->stats.gotc;
- regs_buff[88] = adapter->stats.rnbc;
- regs_buff[89] = adapter->stats.ruc;
- regs_buff[90] = adapter->stats.rfc;
- regs_buff[91] = adapter->stats.roc;
- regs_buff[92] = adapter->stats.rjc;
- regs_buff[93] = adapter->stats.mgprc;
- regs_buff[94] = adapter->stats.mgpdc;
- regs_buff[95] = adapter->stats.mgptc;
- regs_buff[96] = adapter->stats.tor;
- regs_buff[98] = adapter->stats.tot;
- regs_buff[100] = adapter->stats.tpr;
- regs_buff[101] = adapter->stats.tpt;
- regs_buff[102] = adapter->stats.ptc64;
- regs_buff[103] = adapter->stats.ptc127;
- regs_buff[104] = adapter->stats.ptc255;
- regs_buff[105] = adapter->stats.ptc511;
- regs_buff[106] = adapter->stats.ptc1023;
- regs_buff[107] = adapter->stats.ptc1522;
- regs_buff[108] = adapter->stats.mptc;
- regs_buff[109] = adapter->stats.bptc;
- regs_buff[110] = adapter->stats.tsctc;
- regs_buff[111] = adapter->stats.iac;
- regs_buff[112] = adapter->stats.rpthc;
- regs_buff[113] = adapter->stats.hgptc;
- regs_buff[114] = adapter->stats.hgorc;
- regs_buff[116] = adapter->stats.hgotc;
- regs_buff[118] = adapter->stats.lenerrs;
- regs_buff[119] = adapter->stats.scvpc;
- regs_buff[120] = adapter->stats.hrmpc;
-
- for (i = 0; i < 4; i++)
- regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
- for (i = 0; i < 4; i++)
- regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
- for (i = 0; i < 4; i++)
- regs_buff[129 + i] = rd32(E1000_RDBAL(i));
- for (i = 0; i < 4; i++)
- regs_buff[133 + i] = rd32(E1000_RDBAH(i));
- for (i = 0; i < 4; i++)
- regs_buff[137 + i] = rd32(E1000_RDLEN(i));
- for (i = 0; i < 4; i++)
- regs_buff[141 + i] = rd32(E1000_RDH(i));
- for (i = 0; i < 4; i++)
- regs_buff[145 + i] = rd32(E1000_RDT(i));
- for (i = 0; i < 4; i++)
- regs_buff[149 + i] = rd32(E1000_RXDCTL(i));
-
- for (i = 0; i < 10; i++)
- regs_buff[153 + i] = rd32(E1000_EITR(i));
- for (i = 0; i < 8; i++)
- regs_buff[163 + i] = rd32(E1000_IMIR(i));
- for (i = 0; i < 8; i++)
- regs_buff[171 + i] = rd32(E1000_IMIREXT(i));
- for (i = 0; i < 16; i++)
- regs_buff[179 + i] = rd32(E1000_RAL(i));
- for (i = 0; i < 16; i++)
- regs_buff[195 + i] = rd32(E1000_RAH(i));
-
- for (i = 0; i < 4; i++)
- regs_buff[211 + i] = rd32(E1000_TDBAL(i));
- for (i = 0; i < 4; i++)
- regs_buff[215 + i] = rd32(E1000_TDBAH(i));
- for (i = 0; i < 4; i++)
- regs_buff[219 + i] = rd32(E1000_TDLEN(i));
- for (i = 0; i < 4; i++)
- regs_buff[223 + i] = rd32(E1000_TDH(i));
- for (i = 0; i < 4; i++)
- regs_buff[227 + i] = rd32(E1000_TDT(i));
- for (i = 0; i < 4; i++)
- regs_buff[231 + i] = rd32(E1000_TXDCTL(i));
- for (i = 0; i < 4; i++)
- regs_buff[235 + i] = rd32(E1000_TDWBAL(i));
- for (i = 0; i < 4; i++)
- regs_buff[239 + i] = rd32(E1000_TDWBAH(i));
- for (i = 0; i < 4; i++)
- regs_buff[243 + i] = rd32(E1000_DCA_TXCTRL(i));
-
- for (i = 0; i < 4; i++)
- regs_buff[247 + i] = rd32(E1000_IP4AT_REG(i));
- for (i = 0; i < 4; i++)
- regs_buff[251 + i] = rd32(E1000_IP6AT_REG(i));
- for (i = 0; i < 32; i++)
- regs_buff[255 + i] = rd32(E1000_WUPM_REG(i));
- for (i = 0; i < 128; i++)
- regs_buff[287 + i] = rd32(E1000_FFMT_REG(i));
- for (i = 0; i < 128; i++)
- regs_buff[415 + i] = rd32(E1000_FFVT_REG(i));
- for (i = 0; i < 4; i++)
- regs_buff[543 + i] = rd32(E1000_FFLT_REG(i));
-
- regs_buff[547] = rd32(E1000_TDFH);
- regs_buff[548] = rd32(E1000_TDFT);
- regs_buff[549] = rd32(E1000_TDFHS);
- regs_buff[550] = rd32(E1000_TDFPC);
- regs_buff[551] = adapter->stats.o2bgptc;
- regs_buff[552] = adapter->stats.b2ospc;
- regs_buff[553] = adapter->stats.o2bspc;
- regs_buff[554] = adapter->stats.b2ogprc;
-}
-
-static int igb_get_eeprom_len(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- return adapter->hw.nvm.word_size * 2;
-}
-
-static int igb_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- int first_word, last_word;
- int ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- eeprom->magic = hw->vendor_id | (hw->device_id << 16);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-
- eeprom_buff = kmalloc(sizeof(u16) *
- (last_word - first_word + 1), GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- if (hw->nvm.type == e1000_nvm_eeprom_spi)
- ret_val = hw->nvm.ops.read(hw, first_word,
- last_word - first_word + 1,
- eeprom_buff);
- else {
- for (i = 0; i < last_word - first_word + 1; i++) {
- ret_val = hw->nvm.ops.read(hw, first_word + i, 1,
- &eeprom_buff[i]);
- if (ret_val)
- break;
- }
- }
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1),
- eeprom->len);
- kfree(eeprom_buff);
-
- return ret_val;
-}
-
-static int igb_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- void *ptr;
- int max_len, first_word, last_word, ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EOPNOTSUPP;
-
- if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
- return -EFAULT;
-
- max_len = hw->nvm.word_size * 2;
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ptr = (void *)eeprom_buff;
-
- if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
- ret_val = hw->nvm.ops.read(hw, first_word, 1,
- &eeprom_buff[0]);
- ptr++;
- }
- if (((eeprom->offset + eeprom->len) & 1) && (ret_val == 0)) {
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
- ret_val = hw->nvm.ops.read(hw, last_word, 1,
- &eeprom_buff[last_word - first_word]);
- }
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < last_word - first_word + 1; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(ptr, bytes, eeprom->len);
-
- for (i = 0; i < last_word - first_word + 1; i++)
- eeprom_buff[i] = cpu_to_le16(eeprom_buff[i]);
-
- ret_val = hw->nvm.ops.write(hw, first_word,
- last_word - first_word + 1, eeprom_buff);
-
- /* Update the checksum over the first part of the EEPROM if needed
- * and flush shadow RAM for 82573 controllers */
- if ((ret_val == 0) && ((first_word <= NVM_CHECKSUM_REG)))
- hw->nvm.ops.update(hw);
-
- kfree(eeprom_buff);
- return ret_val;
-}
-
-static void igb_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32];
- u16 eeprom_data;
-
- strncpy(drvinfo->driver, igb_driver_name, sizeof(drvinfo->driver) - 1);
- strncpy(drvinfo->version, igb_driver_version,
- sizeof(drvinfo->version) - 1);
-
- /* EEPROM image version # is reported as firmware version # for
- * 82575 controllers */
- adapter->hw.nvm.ops.read(&adapter->hw, 5, 1, &eeprom_data);
- sprintf(firmware_version, "%d.%d-%d",
- (eeprom_data & 0xF000) >> 12,
- (eeprom_data & 0x0FF0) >> 4,
- eeprom_data & 0x000F);
-
- strncpy(drvinfo->fw_version, firmware_version,
- sizeof(drvinfo->fw_version) - 1);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info) - 1);
- drvinfo->n_stats = IGB_STATS_LEN;
- drvinfo->testinfo_len = IGB_TEST_LEN;
- drvinfo->regdump_len = igb_get_regs_len(netdev);
- drvinfo->eedump_len = igb_get_eeprom_len(netdev);
-}
-
-static void igb_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- ring->rx_max_pending = IGB_MAX_RXD;
- ring->tx_max_pending = IGB_MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = adapter->rx_ring_count;
- ring->tx_pending = adapter->tx_ring_count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int igb_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct igb_ring *temp_ring;
- int i, err = 0;
- u16 new_rx_count, new_tx_count;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- new_rx_count = min_t(u32, ring->rx_pending, IGB_MAX_RXD);
- new_rx_count = max_t(u16, new_rx_count, IGB_MIN_RXD);
- new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
-
- new_tx_count = min_t(u32, ring->tx_pending, IGB_MAX_TXD);
- new_tx_count = max_t(u16, new_tx_count, IGB_MIN_TXD);
- new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if ((new_tx_count == adapter->tx_ring_count) &&
- (new_rx_count == adapter->rx_ring_count)) {
- /* nothing to do */
- return 0;
- }
-
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
-
- if (!netif_running(adapter->netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i]->count = new_tx_count;
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->count = new_rx_count;
- adapter->tx_ring_count = new_tx_count;
- adapter->rx_ring_count = new_rx_count;
- goto clear_reset;
- }
-
- if (adapter->num_tx_queues > adapter->num_rx_queues)
- temp_ring = vmalloc(adapter->num_tx_queues * sizeof(struct igb_ring));
- else
- temp_ring = vmalloc(adapter->num_rx_queues * sizeof(struct igb_ring));
-
- if (!temp_ring) {
- err = -ENOMEM;
- goto clear_reset;
- }
-
- igb_down(adapter);
-
- /*
- * We can't just free everything and then setup again,
- * because the ISRs in MSI-X mode get passed pointers
- * to the tx and rx ring structs.
- */
- if (new_tx_count != adapter->tx_ring_count) {
- for (i = 0; i < adapter->num_tx_queues; i++) {
- memcpy(&temp_ring[i], adapter->tx_ring[i],
- sizeof(struct igb_ring));
-
- temp_ring[i].count = new_tx_count;
- err = igb_setup_tx_resources(&temp_ring[i]);
- if (err) {
- while (i) {
- i--;
- igb_free_tx_resources(&temp_ring[i]);
- }
- goto err_setup;
- }
- }
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- igb_free_tx_resources(adapter->tx_ring[i]);
-
- memcpy(adapter->tx_ring[i], &temp_ring[i],
- sizeof(struct igb_ring));
- }
-
- adapter->tx_ring_count = new_tx_count;
- }
-
- if (new_rx_count != adapter->rx_ring_count) {
- for (i = 0; i < adapter->num_rx_queues; i++) {
- memcpy(&temp_ring[i], adapter->rx_ring[i],
- sizeof(struct igb_ring));
-
- temp_ring[i].count = new_rx_count;
- err = igb_setup_rx_resources(&temp_ring[i]);
- if (err) {
- while (i) {
- i--;
- igb_free_rx_resources(&temp_ring[i]);
- }
- goto err_setup;
- }
-
- }
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- igb_free_rx_resources(adapter->rx_ring[i]);
-
- memcpy(adapter->rx_ring[i], &temp_ring[i],
- sizeof(struct igb_ring));
- }
-
- adapter->rx_ring_count = new_rx_count;
- }
-err_setup:
- igb_up(adapter);
- vfree(temp_ring);
-clear_reset:
- clear_bit(__IGB_RESETTING, &adapter->state);
- return err;
-}
-
-/* ethtool register test data */
-struct igb_reg_test {
- u16 reg;
- u16 reg_offset;
- u16 array_len;
- u16 test_type;
- u32 mask;
- u32 write;
-};
-
-/* In the hardware, registers are laid out either singly, in arrays
- * spaced 0x100 bytes apart, or in contiguous tables. We assume
- * most tests take place on arrays or single registers (handled
- * as a single-element array) and special-case the tables.
- * Table tests are always pattern tests.
- *
- * We also make provision for some required setup steps by specifying
- * registers to be written without any read-back testing.
- */
-
-#define PATTERN_TEST 1
-#define SET_READ_TEST 2
-#define WRITE_NO_TEST 3
-#define TABLE32_TEST 4
-#define TABLE64_TEST_LO 5
-#define TABLE64_TEST_HI 6
-
-/* i350 reg test */
-static struct igb_reg_test reg_test_i350[] = {
- { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFF0000, 0xFFFF0000 },
- { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- /* RDH is read-only for i350, only test RDT. */
- { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
- { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
- { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
- { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RA, 0, 16, TABLE64_TEST_LO,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA, 0, 16, TABLE64_TEST_HI,
- 0xC3FFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 16, TABLE64_TEST_LO,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 16, TABLE64_TEST_HI,
- 0xC3FFFFFF, 0xFFFFFFFF },
- { E1000_MTA, 0, 128, TABLE32_TEST,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-/* 82580 reg test */
-static struct igb_reg_test reg_test_82580[] = {
- { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_RDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- /* RDH is read-only for 82580, only test RDT. */
- { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
- { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
- { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_TDBAL(4), 0x40, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(4), 0x40, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(4), 0x40, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_TDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TDT(4), 0x40, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
- { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RA, 0, 16, TABLE64_TEST_LO,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA, 0, 16, TABLE64_TEST_HI,
- 0x83FFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 8, TABLE64_TEST_LO,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 8, TABLE64_TEST_HI,
- 0x83FFFFFF, 0xFFFFFFFF },
- { E1000_MTA, 0, 128, TABLE32_TEST,
- 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-/* 82576 reg test */
-static struct igb_reg_test reg_test_82576[] = {
- { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_RDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- /* Enable all RX queues before testing. */
- { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
- { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
- /* RDH is read-only for 82576, only test RDT. */
- { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RDT(4), 0x40, 12, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
- { E1000_RXDCTL(4), 0x40, 12, WRITE_NO_TEST, 0, 0 },
- { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
- { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
- { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_TDBAL(4), 0x40, 12, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(4), 0x40, 12, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(4), 0x40, 12, PATTERN_TEST, 0x000FFFF0, 0x000FFFFF },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0x003FFFFB },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB0FE, 0xFFFFFFFF },
- { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 8, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA2, 0, 8, TABLE64_TEST_HI, 0x83FFFFFF, 0xFFFFFFFF },
- { E1000_MTA, 0, 128,TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-/* 82575 register test */
-static struct igb_reg_test reg_test_82575[] = {
- { E1000_FCAL, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_FCAH, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_FCT, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0xFFFFFFFF },
- { E1000_VET, 0x100, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_RDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- /* Enable all four RX queues before testing. */
- { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, E1000_RXDCTL_QUEUE_ENABLE },
- /* RDH is read-only for 82575, only test RDT. */
- { E1000_RDT(0), 0x100, 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_RXDCTL(0), 0x100, 4, WRITE_NO_TEST, 0, 0 },
- { E1000_FCRTH, 0x100, 1, PATTERN_TEST, 0x0000FFF0, 0x0000FFF0 },
- { E1000_FCTTV, 0x100, 1, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { E1000_TIPG, 0x100, 1, PATTERN_TEST, 0x3FFFFFFF, 0x3FFFFFFF },
- { E1000_TDBAL(0), 0x100, 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { E1000_TDBAH(0), 0x100, 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_TDLEN(0), 0x100, 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0x003FFFFB },
- { E1000_RCTL, 0x100, 1, SET_READ_TEST, 0x04CFB3FE, 0xFFFFFFFF },
- { E1000_TCTL, 0x100, 1, SET_READ_TEST, 0xFFFFFFFF, 0x00000000 },
- { E1000_TXCW, 0x100, 1, PATTERN_TEST, 0xC000FFFF, 0x0000FFFF },
- { E1000_RA, 0, 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
- { E1000_RA, 0, 16, TABLE64_TEST_HI, 0x800FFFFF, 0xFFFFFFFF },
- { E1000_MTA, 0, 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-static bool reg_pattern_test(struct igb_adapter *adapter, u64 *data,
- int reg, u32 mask, u32 write)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 pat, val;
- static const u32 _test[] =
- {0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
- for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
- wr32(reg, (_test[pat] & write));
- val = rd32(reg) & mask;
- if (val != (_test[pat] & write & mask)) {
- dev_err(&adapter->pdev->dev, "pattern test reg %04X "
- "failed: got 0x%08X expected 0x%08X\n",
- reg, val, (_test[pat] & write & mask));
- *data = reg;
- return 1;
- }
- }
-
- return 0;
-}
-
-static bool reg_set_and_check(struct igb_adapter *adapter, u64 *data,
- int reg, u32 mask, u32 write)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 val;
- wr32(reg, write & mask);
- val = rd32(reg);
- if ((write & mask) != (val & mask)) {
- dev_err(&adapter->pdev->dev, "set/check reg %04X test failed:"
- " got 0x%08X expected 0x%08X\n", reg,
- (val & mask), (write & mask));
- *data = reg;
- return 1;
- }
-
- return 0;
-}
-
-#define REG_PATTERN_TEST(reg, mask, write) \
- do { \
- if (reg_pattern_test(adapter, data, reg, mask, write)) \
- return 1; \
- } while (0)
-
-#define REG_SET_AND_CHECK(reg, mask, write) \
- do { \
- if (reg_set_and_check(adapter, data, reg, mask, write)) \
- return 1; \
- } while (0)
-
-static int igb_reg_test(struct igb_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct igb_reg_test *test;
- u32 value, before, after;
- u32 i, toggle;
-
- switch (adapter->hw.mac.type) {
- case e1000_i350:
- test = reg_test_i350;
- toggle = 0x7FEFF3FF;
- break;
- case e1000_82580:
- test = reg_test_82580;
- toggle = 0x7FEFF3FF;
- break;
- case e1000_82576:
- test = reg_test_82576;
- toggle = 0x7FFFF3FF;
- break;
- default:
- test = reg_test_82575;
- toggle = 0x7FFFF3FF;
- break;
- }
-
- /* Because the status register is such a special case,
- * we handle it separately from the rest of the register
- * tests. Some bits are read-only, some toggle, and some
- * are writable on newer MACs.
- */
- before = rd32(E1000_STATUS);
- value = (rd32(E1000_STATUS) & toggle);
- wr32(E1000_STATUS, toggle);
- after = rd32(E1000_STATUS) & toggle;
- if (value != after) {
- dev_err(&adapter->pdev->dev, "failed STATUS register test "
- "got: 0x%08X expected: 0x%08X\n", after, value);
- *data = 1;
- return 1;
- }
- /* restore previous status */
- wr32(E1000_STATUS, before);
-
- /* Perform the remainder of the register test, looping through
- * the test table until we either fail or reach the null entry.
- */
- while (test->reg) {
- for (i = 0; i < test->array_len; i++) {
- switch (test->test_type) {
- case PATTERN_TEST:
- REG_PATTERN_TEST(test->reg +
- (i * test->reg_offset),
- test->mask,
- test->write);
- break;
- case SET_READ_TEST:
- REG_SET_AND_CHECK(test->reg +
- (i * test->reg_offset),
- test->mask,
- test->write);
- break;
- case WRITE_NO_TEST:
- writel(test->write,
- (adapter->hw.hw_addr + test->reg)
- + (i * test->reg_offset));
- break;
- case TABLE32_TEST:
- REG_PATTERN_TEST(test->reg + (i * 4),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_LO:
- REG_PATTERN_TEST(test->reg + (i * 8),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_HI:
- REG_PATTERN_TEST((test->reg + 4) + (i * 8),
- test->mask,
- test->write);
- break;
- }
- }
- test++;
- }
-
- *data = 0;
- return 0;
-}
-
-static int igb_eeprom_test(struct igb_adapter *adapter, u64 *data)
-{
- u16 temp;
- u16 checksum = 0;
- u16 i;
-
- *data = 0;
- /* Read and add up the contents of the EEPROM */
- for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
- if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
- *data = 1;
- break;
- }
- checksum += temp;
- }
-
- /* If Checksum is not Correct return error else test passed */
- if ((checksum != (u16) NVM_SUM) && !(*data))
- *data = 2;
-
- return *data;
-}
-
-static irqreturn_t igb_test_intr(int irq, void *data)
-{
- struct igb_adapter *adapter = (struct igb_adapter *) data;
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->test_icr |= rd32(E1000_ICR);
-
- return IRQ_HANDLED;
-}
-
-static int igb_intr_test(struct igb_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 mask, ics_mask, i = 0, shared_int = true;
- u32 irq = adapter->pdev->irq;
-
- *data = 0;
-
- /* Hook up test interrupt handler just for this test */
- if (adapter->msix_entries) {
- if (request_irq(adapter->msix_entries[0].vector,
- igb_test_intr, 0, netdev->name, adapter)) {
- *data = 1;
- return -1;
- }
- } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
- shared_int = false;
- if (request_irq(irq,
- igb_test_intr, 0, netdev->name, adapter)) {
- *data = 1;
- return -1;
- }
- } else if (!request_irq(irq, igb_test_intr, IRQF_PROBE_SHARED,
- netdev->name, adapter)) {
- shared_int = false;
- } else if (request_irq(irq, igb_test_intr, IRQF_SHARED,
- netdev->name, adapter)) {
- *data = 1;
- return -1;
- }
- dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
- (shared_int ? "shared" : "unshared"));
-
- /* Disable all the interrupts */
- wr32(E1000_IMC, ~0);
- wrfl();
- msleep(10);
-
- /* Define all writable bits for ICS */
- switch (hw->mac.type) {
- case e1000_82575:
- ics_mask = 0x37F47EDD;
- break;
- case e1000_82576:
- ics_mask = 0x77D4FBFD;
- break;
- case e1000_82580:
- ics_mask = 0x77DCFED5;
- break;
- case e1000_i350:
- ics_mask = 0x77DCFED5;
- break;
- default:
- ics_mask = 0x7FFFFFFF;
- break;
- }
-
- /* Test each interrupt */
- for (; i < 31; i++) {
- /* Interrupt to test */
- mask = 1 << i;
-
- if (!(mask & ics_mask))
- continue;
-
- if (!shared_int) {
- /* Disable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
-
- /* Flush any pending interrupts */
- wr32(E1000_ICR, ~0);
-
- wr32(E1000_IMC, mask);
- wr32(E1000_ICS, mask);
- wrfl();
- msleep(10);
-
- if (adapter->test_icr & mask) {
- *data = 3;
- break;
- }
- }
-
- /* Enable the interrupt to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was not posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
-
- /* Flush any pending interrupts */
- wr32(E1000_ICR, ~0);
-
- wr32(E1000_IMS, mask);
- wr32(E1000_ICS, mask);
- wrfl();
- msleep(10);
-
- if (!(adapter->test_icr & mask)) {
- *data = 4;
- break;
- }
-
- if (!shared_int) {
- /* Disable the other interrupts to be reported in
- * the cause register and then force the other
- * interrupts and see if any get posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
-
- /* Flush any pending interrupts */
- wr32(E1000_ICR, ~0);
-
- wr32(E1000_IMC, ~mask);
- wr32(E1000_ICS, ~mask);
- wrfl();
- msleep(10);
-
- if (adapter->test_icr & mask) {
- *data = 5;
- break;
- }
- }
- }
-
- /* Disable all the interrupts */
- wr32(E1000_IMC, ~0);
- wrfl();
- msleep(10);
-
- /* Unhook test interrupt handler */
- if (adapter->msix_entries)
- free_irq(adapter->msix_entries[0].vector, adapter);
- else
- free_irq(irq, adapter);
-
- return *data;
-}
-
-static void igb_free_desc_rings(struct igb_adapter *adapter)
-{
- igb_free_tx_resources(&adapter->test_tx_ring);
- igb_free_rx_resources(&adapter->test_rx_ring);
-}
-
-static int igb_setup_desc_rings(struct igb_adapter *adapter)
-{
- struct igb_ring *tx_ring = &adapter->test_tx_ring;
- struct igb_ring *rx_ring = &adapter->test_rx_ring;
- struct e1000_hw *hw = &adapter->hw;
- int ret_val;
-
- /* Setup Tx descriptor ring and Tx buffers */
- tx_ring->count = IGB_DEFAULT_TXD;
- tx_ring->dev = &adapter->pdev->dev;
- tx_ring->netdev = adapter->netdev;
- tx_ring->reg_idx = adapter->vfs_allocated_count;
-
- if (igb_setup_tx_resources(tx_ring)) {
- ret_val = 1;
- goto err_nomem;
- }
-
- igb_setup_tctl(adapter);
- igb_configure_tx_ring(adapter, tx_ring);
-
- /* Setup Rx descriptor ring and Rx buffers */
- rx_ring->count = IGB_DEFAULT_RXD;
- rx_ring->dev = &adapter->pdev->dev;
- rx_ring->netdev = adapter->netdev;
- rx_ring->rx_buffer_len = IGB_RXBUFFER_2048;
- rx_ring->reg_idx = adapter->vfs_allocated_count;
-
- if (igb_setup_rx_resources(rx_ring)) {
- ret_val = 3;
- goto err_nomem;
- }
-
- /* set the default queue to queue 0 of PF */
- wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
-
- /* enable receive ring */
- igb_setup_rctl(adapter);
- igb_configure_rx_ring(adapter, rx_ring);
-
- igb_alloc_rx_buffers_adv(rx_ring, igb_desc_unused(rx_ring));
-
- return 0;
-
-err_nomem:
- igb_free_desc_rings(adapter);
- return ret_val;
-}
-
-static void igb_phy_disable_receiver(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* Write out to PHY registers 29 and 30 to disable the Receiver. */
- igb_write_phy_reg(hw, 29, 0x001F);
- igb_write_phy_reg(hw, 30, 0x8FFC);
- igb_write_phy_reg(hw, 29, 0x001A);
- igb_write_phy_reg(hw, 30, 0x8FF0);
-}
-
-static int igb_integrated_phy_loopback(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_reg = 0;
-
- hw->mac.autoneg = false;
-
- if (hw->phy.type == e1000_phy_m88) {
- /* Auto-MDI/MDIX Off */
- igb_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, 0x0808);
- /* reset to update Auto-MDI/MDIX */
- igb_write_phy_reg(hw, PHY_CONTROL, 0x9140);
- /* autoneg off */
- igb_write_phy_reg(hw, PHY_CONTROL, 0x8140);
- } else if (hw->phy.type == e1000_phy_82580) {
- /* enable MII loopback */
- igb_write_phy_reg(hw, I82580_PHY_LBK_CTRL, 0x8041);
- }
-
- ctrl_reg = rd32(E1000_CTRL);
-
- /* force 1000, set loopback */
- igb_write_phy_reg(hw, PHY_CONTROL, 0x4140);
-
- /* Now set up the MAC to the same speed/duplex as the PHY. */
- ctrl_reg = rd32(E1000_CTRL);
- ctrl_reg &= ~E1000_CTRL_SPD_SEL; /* Clear the speed sel bits */
- ctrl_reg |= (E1000_CTRL_FRCSPD | /* Set the Force Speed Bit */
- E1000_CTRL_FRCDPX | /* Set the Force Duplex Bit */
- E1000_CTRL_SPD_1000 |/* Force Speed to 1000 */
- E1000_CTRL_FD | /* Force Duplex to FULL */
- E1000_CTRL_SLU); /* Set link up enable bit */
-
- if (hw->phy.type == e1000_phy_m88)
- ctrl_reg |= E1000_CTRL_ILOS; /* Invert Loss of Signal */
-
- wr32(E1000_CTRL, ctrl_reg);
-
- /* Disable the receiver on the PHY so when a cable is plugged in, the
- * PHY does not begin to autoneg when a cable is reconnected to the NIC.
- */
- if (hw->phy.type == e1000_phy_m88)
- igb_phy_disable_receiver(adapter);
-
- udelay(500);
-
- return 0;
-}
-
-static int igb_set_phy_loopback(struct igb_adapter *adapter)
-{
- return igb_integrated_phy_loopback(adapter);
-}
-
-static int igb_setup_loopback_test(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 reg;
-
- reg = rd32(E1000_CTRL_EXT);
-
- /* use CTRL_EXT to identify link type as SGMII can appear as copper */
- if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
- if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
-
- /* Enable DH89xxCC MPHY for near end loopback */
- reg = rd32(E1000_MPHY_ADDR_CTL);
- reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
- E1000_MPHY_PCS_CLK_REG_OFFSET;
- wr32(E1000_MPHY_ADDR_CTL, reg);
-
- reg = rd32(E1000_MPHY_DATA);
- reg |= E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
- wr32(E1000_MPHY_DATA, reg);
- }
-
- reg = rd32(E1000_RCTL);
- reg |= E1000_RCTL_LBM_TCVR;
- wr32(E1000_RCTL, reg);
-
- wr32(E1000_SCTL, E1000_ENABLE_SERDES_LOOPBACK);
-
- reg = rd32(E1000_CTRL);
- reg &= ~(E1000_CTRL_RFCE |
- E1000_CTRL_TFCE |
- E1000_CTRL_LRST);
- reg |= E1000_CTRL_SLU |
- E1000_CTRL_FD;
- wr32(E1000_CTRL, reg);
-
- /* Unset switch control to serdes energy detect */
- reg = rd32(E1000_CONNSW);
- reg &= ~E1000_CONNSW_ENRGSRC;
- wr32(E1000_CONNSW, reg);
-
- /* Set PCS register for forced speed */
- reg = rd32(E1000_PCS_LCTL);
- reg &= ~E1000_PCS_LCTL_AN_ENABLE; /* Disable Autoneg*/
- reg |= E1000_PCS_LCTL_FLV_LINK_UP | /* Force link up */
- E1000_PCS_LCTL_FSV_1000 | /* Force 1000 */
- E1000_PCS_LCTL_FDV_FULL | /* SerDes Full duplex */
- E1000_PCS_LCTL_FSD | /* Force Speed */
- E1000_PCS_LCTL_FORCE_LINK; /* Force Link */
- wr32(E1000_PCS_LCTL, reg);
-
- return 0;
- }
-
- return igb_set_phy_loopback(adapter);
-}
-
-static void igb_loopback_cleanup(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
- u16 phy_reg;
-
- if ((hw->device_id == E1000_DEV_ID_DH89XXCC_SGMII) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_SERDES) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_BACKPLANE) ||
- (hw->device_id == E1000_DEV_ID_DH89XXCC_SFP)) {
- u32 reg;
-
- /* Disable near end loopback on DH89xxCC */
- reg = rd32(E1000_MPHY_ADDR_CTL);
- reg = (reg & E1000_MPHY_ADDR_CTL_OFFSET_MASK) |
- E1000_MPHY_PCS_CLK_REG_OFFSET;
- wr32(E1000_MPHY_ADDR_CTL, reg);
-
- reg = rd32(E1000_MPHY_DATA);
- reg &= ~E1000_MPHY_PCS_CLK_REG_DIGINELBEN;
- wr32(E1000_MPHY_DATA, reg);
- }
-
- rctl = rd32(E1000_RCTL);
- rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
- wr32(E1000_RCTL, rctl);
-
- hw->mac.autoneg = true;
- igb_read_phy_reg(hw, PHY_CONTROL, &phy_reg);
- if (phy_reg & MII_CR_LOOPBACK) {
- phy_reg &= ~MII_CR_LOOPBACK;
- igb_write_phy_reg(hw, PHY_CONTROL, phy_reg);
- igb_phy_sw_reset(hw);
- }
-}
-
-static void igb_create_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- memset(skb->data, 0xFF, frame_size);
- frame_size /= 2;
- memset(&skb->data[frame_size], 0xAA, frame_size - 1);
- memset(&skb->data[frame_size + 10], 0xBE, 1);
- memset(&skb->data[frame_size + 12], 0xAF, 1);
-}
-
-static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
-{
- frame_size /= 2;
- if (*(skb->data + 3) == 0xFF) {
- if ((*(skb->data + frame_size + 10) == 0xBE) &&
- (*(skb->data + frame_size + 12) == 0xAF)) {
- return 0;
- }
- }
- return 13;
-}
-
-static int igb_clean_test_rings(struct igb_ring *rx_ring,
- struct igb_ring *tx_ring,
- unsigned int size)
-{
- union e1000_adv_rx_desc *rx_desc;
- struct igb_buffer *buffer_info;
- int rx_ntc, tx_ntc, count = 0;
- u32 staterr;
-
- /* initialize next to clean and descriptor values */
- rx_ntc = rx_ring->next_to_clean;
- tx_ntc = tx_ring->next_to_clean;
- rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-
- while (staterr & E1000_RXD_STAT_DD) {
- /* check rx buffer */
- buffer_info = &rx_ring->buffer_info[rx_ntc];
-
- /* unmap rx buffer, will be remapped by alloc_rx_buffers */
- dma_unmap_single(rx_ring->dev,
- buffer_info->dma,
- rx_ring->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- /* verify contents of skb */
- if (!igb_check_lbtest_frame(buffer_info->skb, size))
- count++;
-
- /* unmap buffer on tx side */
- buffer_info = &tx_ring->buffer_info[tx_ntc];
- igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
-
- /* increment rx/tx next to clean counters */
- rx_ntc++;
- if (rx_ntc == rx_ring->count)
- rx_ntc = 0;
- tx_ntc++;
- if (tx_ntc == tx_ring->count)
- tx_ntc = 0;
-
- /* fetch next descriptor */
- rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- /* re-map buffers to ring, store next to clean values */
- igb_alloc_rx_buffers_adv(rx_ring, count);
- rx_ring->next_to_clean = rx_ntc;
- tx_ring->next_to_clean = tx_ntc;
-
- return count;
-}
-
-static int igb_run_loopback_test(struct igb_adapter *adapter)
-{
- struct igb_ring *tx_ring = &adapter->test_tx_ring;
- struct igb_ring *rx_ring = &adapter->test_rx_ring;
- int i, j, lc, good_cnt, ret_val = 0;
- unsigned int size = 1024;
- netdev_tx_t tx_ret_val;
- struct sk_buff *skb;
-
- /* allocate test skb */
- skb = alloc_skb(size, GFP_KERNEL);
- if (!skb)
- return 11;
-
- /* place data into test skb */
- igb_create_lbtest_frame(skb, size);
- skb_put(skb, size);
-
- /*
- * Calculate the loop count based on the largest descriptor ring
- * The idea is to wrap the largest ring a number of times using 64
- * send/receive pairs during each loop
- */
-
- if (rx_ring->count <= tx_ring->count)
- lc = ((tx_ring->count / 64) * 2) + 1;
- else
- lc = ((rx_ring->count / 64) * 2) + 1;
-
- for (j = 0; j <= lc; j++) { /* loop count loop */
- /* reset count of good packets */
- good_cnt = 0;
-
- /* place 64 packets on the transmit queue*/
- for (i = 0; i < 64; i++) {
- skb_get(skb);
- tx_ret_val = igb_xmit_frame_ring_adv(skb, tx_ring);
- if (tx_ret_val == NETDEV_TX_OK)
- good_cnt++;
- }
-
- if (good_cnt != 64) {
- ret_val = 12;
- break;
- }
-
- /* allow 200 milliseconds for packets to go from tx to rx */
- msleep(200);
-
- good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
- if (good_cnt != 64) {
- ret_val = 13;
- break;
- }
- } /* end loop count loop */
-
- /* free the original skb */
- kfree_skb(skb);
-
- return ret_val;
-}
-
-static int igb_loopback_test(struct igb_adapter *adapter, u64 *data)
-{
- /* PHY loopback cannot be performed if SoL/IDER
- * sessions are active */
- if (igb_check_reset_block(&adapter->hw)) {
- dev_err(&adapter->pdev->dev,
- "Cannot do PHY loopback test "
- "when SoL/IDER is active.\n");
- *data = 0;
- goto out;
- }
- *data = igb_setup_desc_rings(adapter);
- if (*data)
- goto out;
- *data = igb_setup_loopback_test(adapter);
- if (*data)
- goto err_loopback;
- *data = igb_run_loopback_test(adapter);
- igb_loopback_cleanup(adapter);
-
-err_loopback:
- igb_free_desc_rings(adapter);
-out:
- return *data;
-}
-
-static int igb_link_test(struct igb_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- *data = 0;
- if (hw->phy.media_type == e1000_media_type_internal_serdes) {
- int i = 0;
- hw->mac.serdes_has_link = false;
-
- /* On some blade server designs, link establishment
- * could take as long as 2-3 minutes */
- do {
- hw->mac.ops.check_for_link(&adapter->hw);
- if (hw->mac.serdes_has_link)
- return *data;
- msleep(20);
- } while (i++ < 3750);
-
- *data = 1;
- } else {
- hw->mac.ops.check_for_link(&adapter->hw);
- if (hw->mac.autoneg)
- msleep(4000);
-
- if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
- *data = 1;
- }
- return *data;
-}
-
-static void igb_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- u16 autoneg_advertised;
- u8 forced_speed_duplex, autoneg;
- bool if_running = netif_running(netdev);
-
- set_bit(__IGB_TESTING, &adapter->state);
- if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- /* save speed, duplex, autoneg settings */
- autoneg_advertised = adapter->hw.phy.autoneg_advertised;
- forced_speed_duplex = adapter->hw.mac.forced_speed_duplex;
- autoneg = adapter->hw.mac.autoneg;
-
- dev_info(&adapter->pdev->dev, "offline testing starting\n");
-
- /* power up link for link test */
- igb_power_up_link(adapter);
-
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
- if (igb_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- if (if_running)
- /* indicate we're in test mode */
- dev_close(netdev);
- else
- igb_reset(adapter);
-
- if (igb_reg_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- igb_reset(adapter);
- if (igb_eeprom_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- igb_reset(adapter);
- if (igb_intr_test(adapter, &data[2]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- igb_reset(adapter);
- /* power up link for loopback test */
- igb_power_up_link(adapter);
- if (igb_loopback_test(adapter, &data[3]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* restore speed, duplex, autoneg settings */
- adapter->hw.phy.autoneg_advertised = autoneg_advertised;
- adapter->hw.mac.forced_speed_duplex = forced_speed_duplex;
- adapter->hw.mac.autoneg = autoneg;
-
- /* force this routine to wait until autoneg complete/timeout */
- adapter->hw.phy.autoneg_wait_to_complete = true;
- igb_reset(adapter);
- adapter->hw.phy.autoneg_wait_to_complete = false;
-
- clear_bit(__IGB_TESTING, &adapter->state);
- if (if_running)
- dev_open(netdev);
- } else {
- dev_info(&adapter->pdev->dev, "online testing starting\n");
-
- /* PHY is powered down when interface is down */
- if (if_running && igb_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
- else
- data[4] = 0;
-
- /* Online tests aren't run; pass by default */
- data[0] = 0;
- data[1] = 0;
- data[2] = 0;
- data[3] = 0;
-
- clear_bit(__IGB_TESTING, &adapter->state);
- }
- msleep_interruptible(4 * 1000);
-}
-
-static int igb_wol_exclusion(struct igb_adapter *adapter,
- struct ethtool_wolinfo *wol)
-{
- struct e1000_hw *hw = &adapter->hw;
- int retval = 1; /* fail by default */
-
- switch (hw->device_id) {
- case E1000_DEV_ID_82575GB_QUAD_COPPER:
- /* WoL not supported */
- wol->supported = 0;
- break;
- case E1000_DEV_ID_82575EB_FIBER_SERDES:
- case E1000_DEV_ID_82576_FIBER:
- case E1000_DEV_ID_82576_SERDES:
- /* Wake events not supported on port B */
- if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1) {
- wol->supported = 0;
- break;
- }
- /* return success for non excluded adapter ports */
- retval = 0;
- break;
- case E1000_DEV_ID_82576_QUAD_COPPER:
- case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
- /* quad port adapters only support WoL on port A */
- if (!(adapter->flags & IGB_FLAG_QUAD_PORT_A)) {
- wol->supported = 0;
- break;
- }
- /* return success for non excluded adapter ports */
- retval = 0;
- break;
- default:
- /* dual port cards only support WoL on port A from now on
- * unless it was enabled in the eeprom for port B
- * so exclude FUNC_1 ports from having WoL enabled */
- if ((rd32(E1000_STATUS) & E1000_STATUS_FUNC_MASK) &&
- !adapter->eeprom_wol) {
- wol->supported = 0;
- break;
- }
-
- retval = 0;
- }
-
- return retval;
-}
-
-static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC |
- WAKE_PHY;
- wol->wolopts = 0;
-
- /* this function will set ->supported = 0 and return 1 if wol is not
- * supported by this hardware */
- if (igb_wol_exclusion(adapter, wol) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return;
-
- /* apply any specific unsupported masks here */
- switch (adapter->hw.device_id) {
- default:
- break;
- }
-
- if (adapter->wol & E1000_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & E1000_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & E1000_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & E1000_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
- if (adapter->wol & E1000_WUFC_LNKC)
- wol->wolopts |= WAKE_PHY;
-}
-
-static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- if (wol->wolopts & (WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
-
- if (igb_wol_exclusion(adapter, wol) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return wol->wolopts ? -EOPNOTSUPP : 0;
-
- /* these settings will always override what we currently have */
- adapter->wol = 0;
-
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= E1000_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= E1000_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= E1000_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= E1000_WUFC_MAG;
- if (wol->wolopts & WAKE_PHY)
- adapter->wol |= E1000_WUFC_LNKC;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- return 0;
-}
-
-/* bit defines for adapter->led_status */
-#define IGB_LED_ON 0
-
-static int igb_set_phys_id(struct net_device *netdev,
- enum ethtool_phys_id_state state)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- igb_blink_led(hw);
- return 2;
- case ETHTOOL_ID_ON:
- igb_blink_led(hw);
- break;
- case ETHTOOL_ID_OFF:
- igb_led_off(hw);
- break;
- case ETHTOOL_ID_INACTIVE:
- igb_led_off(hw);
- clear_bit(IGB_LED_ON, &adapter->led_status);
- igb_cleanup_led(hw);
- break;
- }
-
- return 0;
-}
-
-static int igb_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- int i;
-
- if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
- ((ec->tx_coalesce_usecs > 3) &&
- (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
- (ec->tx_coalesce_usecs == 2))
- return -EINVAL;
-
- if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
- return -EINVAL;
-
- /* If ITR is disabled, disable DMAC */
- if (ec->rx_coalesce_usecs == 0) {
- if (adapter->flags & IGB_FLAG_DMAC)
- adapter->flags &= ~IGB_FLAG_DMAC;
- }
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
- adapter->rx_itr_setting = ec->rx_coalesce_usecs;
- else
- adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
-
- /* convert to rate of irq's per second */
- if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
- adapter->tx_itr_setting = adapter->rx_itr_setting;
- else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
- adapter->tx_itr_setting = ec->tx_coalesce_usecs;
- else
- adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- if (q_vector->rx_ring)
- q_vector->itr_val = adapter->rx_itr_setting;
- else
- q_vector->itr_val = adapter->tx_itr_setting;
- if (q_vector->itr_val && q_vector->itr_val <= 3)
- q_vector->itr_val = IGB_START_ITR;
- q_vector->set_itr = 1;
- }
-
- return 0;
-}
-
-static int igb_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->rx_itr_setting <= 3)
- ec->rx_coalesce_usecs = adapter->rx_itr_setting;
- else
- ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
-
- if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
- if (adapter->tx_itr_setting <= 3)
- ec->tx_coalesce_usecs = adapter->tx_itr_setting;
- else
- ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
- }
-
- return 0;
-}
-
-static int igb_nway_reset(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- if (netif_running(netdev))
- igb_reinit_locked(adapter);
- return 0;
-}
-
-static int igb_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return IGB_STATS_LEN;
- case ETH_SS_TEST:
- return IGB_TEST_LEN;
- default:
- return -ENOTSUPP;
- }
-}
-
-static void igb_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct rtnl_link_stats64 *net_stats = &adapter->stats64;
- unsigned int start;
- struct igb_ring *ring;
- int i, j;
- char *p;
-
- spin_lock(&adapter->stats64_lock);
- igb_update_stats(adapter, net_stats);
-
- for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
- p = (char *)adapter + igb_gstrings_stats[i].stat_offset;
- data[i] = (igb_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
- for (j = 0; j < IGB_NETDEV_STATS_LEN; j++, i++) {
- p = (char *)net_stats + igb_gstrings_net_stats[j].stat_offset;
- data[i] = (igb_gstrings_net_stats[j].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
- for (j = 0; j < adapter->num_tx_queues; j++) {
- u64 restart2;
-
- ring = adapter->tx_ring[j];
- do {
- start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
- data[i] = ring->tx_stats.packets;
- data[i+1] = ring->tx_stats.bytes;
- data[i+2] = ring->tx_stats.restart_queue;
- } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
- do {
- start = u64_stats_fetch_begin_bh(&ring->tx_syncp2);
- restart2 = ring->tx_stats.restart_queue2;
- } while (u64_stats_fetch_retry_bh(&ring->tx_syncp2, start));
- data[i+2] += restart2;
-
- i += IGB_TX_QUEUE_STATS_LEN;
- }
- for (j = 0; j < adapter->num_rx_queues; j++) {
- ring = adapter->rx_ring[j];
- do {
- start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
- data[i] = ring->rx_stats.packets;
- data[i+1] = ring->rx_stats.bytes;
- data[i+2] = ring->rx_stats.drops;
- data[i+3] = ring->rx_stats.csum_err;
- data[i+4] = ring->rx_stats.alloc_failed;
- } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
- i += IGB_RX_QUEUE_STATS_LEN;
- }
- spin_unlock(&adapter->stats64_lock);
-}
-
-static void igb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *igb_gstrings_test,
- IGB_TEST_LEN*ETH_GSTRING_LEN);
- break;
- case ETH_SS_STATS:
- for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
- memcpy(p, igb_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < IGB_NETDEV_STATS_LEN; i++) {
- memcpy(p, igb_gstrings_net_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_tx_queues; i++) {
- sprintf(p, "tx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_queue_%u_restart", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- sprintf(p, "rx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_drops", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_csum_err", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_alloc_failed", i);
- p += ETH_GSTRING_LEN;
- }
-/* BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
- break;
- }
-}
-
-static const struct ethtool_ops igb_ethtool_ops = {
- .get_settings = igb_get_settings,
- .set_settings = igb_set_settings,
- .get_drvinfo = igb_get_drvinfo,
- .get_regs_len = igb_get_regs_len,
- .get_regs = igb_get_regs,
- .get_wol = igb_get_wol,
- .set_wol = igb_set_wol,
- .get_msglevel = igb_get_msglevel,
- .set_msglevel = igb_set_msglevel,
- .nway_reset = igb_nway_reset,
- .get_link = igb_get_link,
- .get_eeprom_len = igb_get_eeprom_len,
- .get_eeprom = igb_get_eeprom,
- .set_eeprom = igb_set_eeprom,
- .get_ringparam = igb_get_ringparam,
- .set_ringparam = igb_set_ringparam,
- .get_pauseparam = igb_get_pauseparam,
- .set_pauseparam = igb_set_pauseparam,
- .self_test = igb_diag_test,
- .get_strings = igb_get_strings,
- .set_phys_id = igb_set_phys_id,
- .get_sset_count = igb_get_sset_count,
- .get_ethtool_stats = igb_get_ethtool_stats,
- .get_coalesce = igb_get_coalesce,
- .set_coalesce = igb_set_coalesce,
-};
-
-void igb_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &igb_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) Gigabit Ethernet Linux driver
- Copyright(c) 2007-2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/bitops.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/netdevice.h>
-#include <linux/ipv6.h>
-#include <linux/slab.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <linux/net_tstamp.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/aer.h>
-#include <linux/prefetch.h>
-#ifdef CONFIG_IGB_DCA
-#include <linux/dca.h>
-#endif
-#include "igb.h"
-
-#define MAJ 3
-#define MIN 0
-#define BUILD 6
-#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
-__stringify(BUILD) "-k"
-char igb_driver_name[] = "igb";
-char igb_driver_version[] = DRV_VERSION;
-static const char igb_driver_string[] =
- "Intel(R) Gigabit Ethernet Network Driver";
-static const char igb_copyright[] = "Copyright (c) 2007-2011 Intel Corporation.";
-
-static const struct e1000_info *igb_info_tbl[] = {
- [board_82575] = &e1000_82575_info,
-};
-
-static DEFINE_PCI_DEVICE_TABLE(igb_pci_tbl) = {
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_COPPER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_FIBER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_SGMII), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_FIBER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_QUAD_FIBER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_SGMII), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82580_COPPER_DUAL), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SGMII), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_BACKPLANE), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_DH89XXCC_SFP), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER_ET2), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_QUAD_COPPER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_COPPER), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575EB_FIBER_SERDES), board_82575 },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82575GB_QUAD_COPPER), board_82575 },
- /* required last entry */
- {0, }
-};
-
-MODULE_DEVICE_TABLE(pci, igb_pci_tbl);
-
-void igb_reset(struct igb_adapter *);
-static int igb_setup_all_tx_resources(struct igb_adapter *);
-static int igb_setup_all_rx_resources(struct igb_adapter *);
-static void igb_free_all_tx_resources(struct igb_adapter *);
-static void igb_free_all_rx_resources(struct igb_adapter *);
-static void igb_setup_mrqc(struct igb_adapter *);
-static int igb_probe(struct pci_dev *, const struct pci_device_id *);
-static void __devexit igb_remove(struct pci_dev *pdev);
-static void igb_init_hw_timer(struct igb_adapter *adapter);
-static int igb_sw_init(struct igb_adapter *);
-static int igb_open(struct net_device *);
-static int igb_close(struct net_device *);
-static void igb_configure_tx(struct igb_adapter *);
-static void igb_configure_rx(struct igb_adapter *);
-static void igb_clean_all_tx_rings(struct igb_adapter *);
-static void igb_clean_all_rx_rings(struct igb_adapter *);
-static void igb_clean_tx_ring(struct igb_ring *);
-static void igb_clean_rx_ring(struct igb_ring *);
-static void igb_set_rx_mode(struct net_device *);
-static void igb_update_phy_info(unsigned long);
-static void igb_watchdog(unsigned long);
-static void igb_watchdog_task(struct work_struct *);
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
-static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *dev,
- struct rtnl_link_stats64 *stats);
-static int igb_change_mtu(struct net_device *, int);
-static int igb_set_mac(struct net_device *, void *);
-static void igb_set_uta(struct igb_adapter *adapter);
-static irqreturn_t igb_intr(int irq, void *);
-static irqreturn_t igb_intr_msi(int irq, void *);
-static irqreturn_t igb_msix_other(int irq, void *);
-static irqreturn_t igb_msix_ring(int irq, void *);
-#ifdef CONFIG_IGB_DCA
-static void igb_update_dca(struct igb_q_vector *);
-static void igb_setup_dca(struct igb_adapter *);
-#endif /* CONFIG_IGB_DCA */
-static bool igb_clean_tx_irq(struct igb_q_vector *);
-static int igb_poll(struct napi_struct *, int);
-static bool igb_clean_rx_irq_adv(struct igb_q_vector *, int *, int);
-static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
-static void igb_tx_timeout(struct net_device *);
-static void igb_reset_task(struct work_struct *);
-static void igb_vlan_mode(struct net_device *netdev, u32 features);
-static void igb_vlan_rx_add_vid(struct net_device *, u16);
-static void igb_vlan_rx_kill_vid(struct net_device *, u16);
-static void igb_restore_vlan(struct igb_adapter *);
-static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
-static void igb_ping_all_vfs(struct igb_adapter *);
-static void igb_msg_task(struct igb_adapter *);
-static void igb_vmm_control(struct igb_adapter *);
-static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
-static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
-static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac);
-static int igb_ndo_set_vf_vlan(struct net_device *netdev,
- int vf, u16 vlan, u8 qos);
-static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
-static int igb_ndo_get_vf_config(struct net_device *netdev, int vf,
- struct ifla_vf_info *ivi);
-static void igb_check_vf_rate_limit(struct igb_adapter *);
-
-#ifdef CONFIG_PM
-static int igb_suspend(struct pci_dev *, pm_message_t);
-static int igb_resume(struct pci_dev *);
-#endif
-static void igb_shutdown(struct pci_dev *);
-#ifdef CONFIG_IGB_DCA
-static int igb_notify_dca(struct notifier_block *, unsigned long, void *);
-static struct notifier_block dca_notifier = {
- .notifier_call = igb_notify_dca,
- .next = NULL,
- .priority = 0
-};
-#endif
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/* for netdump / net console */
-static void igb_netpoll(struct net_device *);
-#endif
-#ifdef CONFIG_PCI_IOV
-static unsigned int max_vfs = 0;
-module_param(max_vfs, uint, 0);
-MODULE_PARM_DESC(max_vfs, "Maximum number of virtual functions to allocate "
- "per physical function");
-#endif /* CONFIG_PCI_IOV */
-
-static pci_ers_result_t igb_io_error_detected(struct pci_dev *,
- pci_channel_state_t);
-static pci_ers_result_t igb_io_slot_reset(struct pci_dev *);
-static void igb_io_resume(struct pci_dev *);
-
-static struct pci_error_handlers igb_err_handler = {
- .error_detected = igb_io_error_detected,
- .slot_reset = igb_io_slot_reset,
- .resume = igb_io_resume,
-};
-
-
-static struct pci_driver igb_driver = {
- .name = igb_driver_name,
- .id_table = igb_pci_tbl,
- .probe = igb_probe,
- .remove = __devexit_p(igb_remove),
-#ifdef CONFIG_PM
- /* Power Management Hooks */
- .suspend = igb_suspend,
- .resume = igb_resume,
-#endif
- .shutdown = igb_shutdown,
- .err_handler = &igb_err_handler
-};
-
-MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
-MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-struct igb_reg_info {
- u32 ofs;
- char *name;
-};
-
-static const struct igb_reg_info igb_reg_info_tbl[] = {
-
- /* General Registers */
- {E1000_CTRL, "CTRL"},
- {E1000_STATUS, "STATUS"},
- {E1000_CTRL_EXT, "CTRL_EXT"},
-
- /* Interrupt Registers */
- {E1000_ICR, "ICR"},
-
- /* RX Registers */
- {E1000_RCTL, "RCTL"},
- {E1000_RDLEN(0), "RDLEN"},
- {E1000_RDH(0), "RDH"},
- {E1000_RDT(0), "RDT"},
- {E1000_RXDCTL(0), "RXDCTL"},
- {E1000_RDBAL(0), "RDBAL"},
- {E1000_RDBAH(0), "RDBAH"},
-
- /* TX Registers */
- {E1000_TCTL, "TCTL"},
- {E1000_TDBAL(0), "TDBAL"},
- {E1000_TDBAH(0), "TDBAH"},
- {E1000_TDLEN(0), "TDLEN"},
- {E1000_TDH(0), "TDH"},
- {E1000_TDT(0), "TDT"},
- {E1000_TXDCTL(0), "TXDCTL"},
- {E1000_TDFH, "TDFH"},
- {E1000_TDFT, "TDFT"},
- {E1000_TDFHS, "TDFHS"},
- {E1000_TDFPC, "TDFPC"},
-
- /* List Terminator */
- {}
-};
-
-/*
- * igb_regdump - register printout routine
- */
-static void igb_regdump(struct e1000_hw *hw, struct igb_reg_info *reginfo)
-{
- int n = 0;
- char rname[16];
- u32 regs[8];
-
- switch (reginfo->ofs) {
- case E1000_RDLEN(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDLEN(n));
- break;
- case E1000_RDH(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDH(n));
- break;
- case E1000_RDT(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDT(n));
- break;
- case E1000_RXDCTL(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RXDCTL(n));
- break;
- case E1000_RDBAL(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDBAL(n));
- break;
- case E1000_RDBAH(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDBAH(n));
- break;
- case E1000_TDBAL(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_RDBAL(n));
- break;
- case E1000_TDBAH(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_TDBAH(n));
- break;
- case E1000_TDLEN(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_TDLEN(n));
- break;
- case E1000_TDH(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_TDH(n));
- break;
- case E1000_TDT(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_TDT(n));
- break;
- case E1000_TXDCTL(0):
- for (n = 0; n < 4; n++)
- regs[n] = rd32(E1000_TXDCTL(n));
- break;
- default:
- printk(KERN_INFO "%-15s %08x\n",
- reginfo->name, rd32(reginfo->ofs));
- return;
- }
-
- snprintf(rname, 16, "%s%s", reginfo->name, "[0-3]");
- printk(KERN_INFO "%-15s ", rname);
- for (n = 0; n < 4; n++)
- printk(KERN_CONT "%08x ", regs[n]);
- printk(KERN_CONT "\n");
-}
-
-/*
- * igb_dump - Print registers, tx-rings and rx-rings
- */
-static void igb_dump(struct igb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct igb_reg_info *reginfo;
- int n = 0;
- struct igb_ring *tx_ring;
- union e1000_adv_tx_desc *tx_desc;
- struct my_u0 { u64 a; u64 b; } *u0;
- struct igb_buffer *buffer_info;
- struct igb_ring *rx_ring;
- union e1000_adv_rx_desc *rx_desc;
- u32 staterr;
- int i = 0;
-
- if (!netif_msg_hw(adapter))
- return;
-
- /* Print netdevice Info */
- if (netdev) {
- dev_info(&adapter->pdev->dev, "Net device Info\n");
- printk(KERN_INFO "Device Name state "
- "trans_start last_rx\n");
- printk(KERN_INFO "%-15s %016lX %016lX %016lX\n",
- netdev->name,
- netdev->state,
- netdev->trans_start,
- netdev->last_rx);
- }
-
- /* Print Registers */
- dev_info(&adapter->pdev->dev, "Register Dump\n");
- printk(KERN_INFO " Register Name Value\n");
- for (reginfo = (struct igb_reg_info *)igb_reg_info_tbl;
- reginfo->name; reginfo++) {
- igb_regdump(hw, reginfo);
- }
-
- /* Print TX Ring Summary */
- if (!netdev || !netif_running(netdev))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]"
- " leng ntw timestamp\n");
- for (n = 0; n < adapter->num_tx_queues; n++) {
- tx_ring = adapter->tx_ring[n];
- buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean];
- printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n",
- n, tx_ring->next_to_use, tx_ring->next_to_clean,
- (u64)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (u64)buffer_info->time_stamp);
- }
-
- /* Print TX Rings */
- if (!netif_msg_tx_done(adapter))
- goto rx_ring_summary;
-
- dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
-
- /* Transmit Descriptor Formats
- *
- * Advanced Transmit Descriptor
- * +--------------------------------------------------------------+
- * 0 | Buffer Address [63:0] |
- * +--------------------------------------------------------------+
- * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
- * +--------------------------------------------------------------+
- * 63 46 45 40 39 38 36 35 32 31 24 15 0
- */
-
- for (n = 0; n < adapter->num_tx_queues; n++) {
- tx_ring = adapter->tx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "TX QUEUE INDEX = %d\n", tx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "T [desc] [address 63:0 ] "
- "[PlPOCIStDDM Ln] [bi->dma ] "
- "leng ntw timestamp bi->skb\n");
-
- for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
- tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- u0 = (struct my_u0 *)tx_desc;
- printk(KERN_INFO "T [0x%03X] %016llX %016llX %016llX"
- " %04X %3X %016llX %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- (u64)buffer_info->dma,
- buffer_info->length,
- buffer_info->next_to_watch,
- (u64)buffer_info->time_stamp,
- buffer_info->skb);
- if (i == tx_ring->next_to_use &&
- i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC/U\n");
- else if (i == tx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == tx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
- if (netif_msg_pktdata(adapter) && buffer_info->dma != 0)
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS,
- 16, 1, phys_to_virt(buffer_info->dma),
- buffer_info->length, true);
- }
- }
-
- /* Print RX Rings Summary */
-rx_ring_summary:
- dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
- printk(KERN_INFO "Queue [NTU] [NTC]\n");
- for (n = 0; n < adapter->num_rx_queues; n++) {
- rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO " %5d %5X %5X\n", n,
- rx_ring->next_to_use, rx_ring->next_to_clean);
- }
-
- /* Print RX Rings */
- if (!netif_msg_rx_status(adapter))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
-
- /* Advanced Receive Descriptor (Read) Format
- * 63 1 0
- * +-----------------------------------------------------+
- * 0 | Packet Buffer Address [63:1] |A0/NSE|
- * +----------------------------------------------+------+
- * 8 | Header Buffer Address [63:1] | DD |
- * +-----------------------------------------------------+
- *
- *
- * Advanced Receive Descriptor (Write-Back) Format
- *
- * 63 48 47 32 31 30 21 20 17 16 4 3 0
- * +------------------------------------------------------+
- * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
- * | Checksum Ident | | | | Type | Type |
- * +------------------------------------------------------+
- * 8 | VLAN Tag | Length | Extended Error | Extended Status |
- * +------------------------------------------------------+
- * 63 48 47 32 31 20 19 0
- */
-
- for (n = 0; n < adapter->num_rx_queues; n++) {
- rx_ring = adapter->rx_ring[n];
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "RX QUEUE INDEX = %d\n", rx_ring->queue_index);
- printk(KERN_INFO "------------------------------------\n");
- printk(KERN_INFO "R [desc] [ PktBuf A0] "
- "[ HeadBuf DD] [bi->dma ] [bi->skb] "
- "<-- Adv Rx Read format\n");
- printk(KERN_INFO "RWB[desc] [PcsmIpSHl PtRs] "
- "[vl er S cks ln] ---------------- [bi->skb] "
- "<-- Adv Rx Write-Back format\n");
-
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
- u0 = (struct my_u0 *)rx_desc;
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- if (staterr & E1000_RXD_STAT_DD) {
- /* Descriptor Done */
- printk(KERN_INFO "RWB[0x%03X] %016llX "
- "%016llX ---------------- %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- buffer_info->skb);
- } else {
- printk(KERN_INFO "R [0x%03X] %016llX "
- "%016llX %016llX %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- (u64)buffer_info->dma,
- buffer_info->skb);
-
- if (netif_msg_pktdata(adapter)) {
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS,
- 16, 1,
- phys_to_virt(buffer_info->dma),
- rx_ring->rx_buffer_len, true);
- if (rx_ring->rx_buffer_len
- < IGB_RXBUFFER_1024)
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS,
- 16, 1,
- phys_to_virt(
- buffer_info->page_dma +
- buffer_info->page_offset),
- PAGE_SIZE/2, true);
- }
- }
-
- if (i == rx_ring->next_to_use)
- printk(KERN_CONT " NTU\n");
- else if (i == rx_ring->next_to_clean)
- printk(KERN_CONT " NTC\n");
- else
- printk(KERN_CONT "\n");
-
- }
- }
-
-exit:
- return;
-}
-
-
-/**
- * igb_read_clock - read raw cycle counter (to be used by time counter)
- */
-static cycle_t igb_read_clock(const struct cyclecounter *tc)
-{
- struct igb_adapter *adapter =
- container_of(tc, struct igb_adapter, cycles);
- struct e1000_hw *hw = &adapter->hw;
- u64 stamp = 0;
- int shift = 0;
-
- /*
- * The timestamp latches on lowest register read. For the 82580
- * the lowest register is SYSTIMR instead of SYSTIML. However we never
- * adjusted TIMINCA so SYSTIMR will just read as all 0s so ignore it.
- */
- if (hw->mac.type == e1000_82580) {
- stamp = rd32(E1000_SYSTIMR) >> 8;
- shift = IGB_82580_TSYNC_SHIFT;
- }
-
- stamp |= (u64)rd32(E1000_SYSTIML) << shift;
- stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
- return stamp;
-}
-
-/**
- * igb_get_hw_dev - return device
- * used by hardware layer to print debugging information
- **/
-struct net_device *igb_get_hw_dev(struct e1000_hw *hw)
-{
- struct igb_adapter *adapter = hw->back;
- return adapter->netdev;
-}
-
-/**
- * igb_init_module - Driver Registration Routine
- *
- * igb_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-static int __init igb_init_module(void)
-{
- int ret;
- printk(KERN_INFO "%s - version %s\n",
- igb_driver_string, igb_driver_version);
-
- printk(KERN_INFO "%s\n", igb_copyright);
-
-#ifdef CONFIG_IGB_DCA
- dca_register_notify(&dca_notifier);
-#endif
- ret = pci_register_driver(&igb_driver);
- return ret;
-}
-
-module_init(igb_init_module);
-
-/**
- * igb_exit_module - Driver Exit Cleanup Routine
- *
- * igb_exit_module is called just before the driver is removed
- * from memory.
- **/
-static void __exit igb_exit_module(void)
-{
-#ifdef CONFIG_IGB_DCA
- dca_unregister_notify(&dca_notifier);
-#endif
- pci_unregister_driver(&igb_driver);
-}
-
-module_exit(igb_exit_module);
-
-#define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
-/**
- * igb_cache_ring_register - Descriptor ring to register mapping
- * @adapter: board private structure to initialize
- *
- * Once we know the feature-set enabled for the device, we'll cache
- * the register offset the descriptor ring is assigned to.
- **/
-static void igb_cache_ring_register(struct igb_adapter *adapter)
-{
- int i = 0, j = 0;
- u32 rbase_offset = adapter->vfs_allocated_count;
-
- switch (adapter->hw.mac.type) {
- case e1000_82576:
- /* The queues are allocated for virtualization such that VF 0
- * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
- * In order to avoid collision we start at the first free queue
- * and continue consuming queues in the same sequence
- */
- if (adapter->vfs_allocated_count) {
- for (; i < adapter->rss_queues; i++)
- adapter->rx_ring[i]->reg_idx = rbase_offset +
- Q_IDX_82576(i);
- }
- case e1000_82575:
- case e1000_82580:
- case e1000_i350:
- default:
- for (; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->reg_idx = rbase_offset + i;
- for (; j < adapter->num_tx_queues; j++)
- adapter->tx_ring[j]->reg_idx = rbase_offset + j;
- break;
- }
-}
-
-static void igb_free_queues(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- kfree(adapter->tx_ring[i]);
- adapter->tx_ring[i] = NULL;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- kfree(adapter->rx_ring[i]);
- adapter->rx_ring[i] = NULL;
- }
- adapter->num_rx_queues = 0;
- adapter->num_tx_queues = 0;
-}
-
-/**
- * igb_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- *
- * We allocate one ring per queue at run-time since we don't know the
- * number of queues at compile-time.
- **/
-static int igb_alloc_queues(struct igb_adapter *adapter)
-{
- struct igb_ring *ring;
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
- if (!ring)
- goto err;
- ring->count = adapter->tx_ring_count;
- ring->queue_index = i;
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
- /* For 82575, context index must be unique per ring. */
- if (adapter->hw.mac.type == e1000_82575)
- ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
- adapter->tx_ring[i] = ring;
- }
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- ring = kzalloc(sizeof(struct igb_ring), GFP_KERNEL);
- if (!ring)
- goto err;
- ring->count = adapter->rx_ring_count;
- ring->queue_index = i;
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
- ring->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- ring->flags = IGB_RING_FLAG_RX_CSUM; /* enable rx checksum */
- /* set flag indicating ring supports SCTP checksum offload */
- if (adapter->hw.mac.type >= e1000_82576)
- ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
- adapter->rx_ring[i] = ring;
- }
-
- igb_cache_ring_register(adapter);
-
- return 0;
-
-err:
- igb_free_queues(adapter);
-
- return -ENOMEM;
-}
-
-#define IGB_N0_QUEUE -1
-static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
-{
- u32 msixbm = 0;
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- u32 ivar, index;
- int rx_queue = IGB_N0_QUEUE;
- int tx_queue = IGB_N0_QUEUE;
-
- if (q_vector->rx_ring)
- rx_queue = q_vector->rx_ring->reg_idx;
- if (q_vector->tx_ring)
- tx_queue = q_vector->tx_ring->reg_idx;
-
- switch (hw->mac.type) {
- case e1000_82575:
- /* The 82575 assigns vectors using a bitmask, which matches the
- bitmask for the EICR/EIMS/EIMC registers. To assign one
- or more queues to a vector, we write the appropriate bits
- into the MSIXBM register for that vector. */
- if (rx_queue > IGB_N0_QUEUE)
- msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
- if (tx_queue > IGB_N0_QUEUE)
- msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
- if (!adapter->msix_entries && msix_vector == 0)
- msixbm |= E1000_EIMS_OTHER;
- array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
- q_vector->eims_value = msixbm;
- break;
- case e1000_82576:
- /* 82576 uses a table-based method for assigning vectors.
- Each queue has a single entry in the table to which we write
- a vector number along with a "valid" bit. Sadly, the layout
- of the table is somewhat counterintuitive. */
- if (rx_queue > IGB_N0_QUEUE) {
- index = (rx_queue & 0x7);
- ivar = array_rd32(E1000_IVAR0, index);
- if (rx_queue < 8) {
- /* vector goes into low byte of register */
- ivar = ivar & 0xFFFFFF00;
- ivar |= msix_vector | E1000_IVAR_VALID;
- } else {
- /* vector goes into third byte of register */
- ivar = ivar & 0xFF00FFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
- }
- array_wr32(E1000_IVAR0, index, ivar);
- }
- if (tx_queue > IGB_N0_QUEUE) {
- index = (tx_queue & 0x7);
- ivar = array_rd32(E1000_IVAR0, index);
- if (tx_queue < 8) {
- /* vector goes into second byte of register */
- ivar = ivar & 0xFFFF00FF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
- } else {
- /* vector goes into high byte of register */
- ivar = ivar & 0x00FFFFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
- }
- array_wr32(E1000_IVAR0, index, ivar);
- }
- q_vector->eims_value = 1 << msix_vector;
- break;
- case e1000_82580:
- case e1000_i350:
- /* 82580 uses the same table-based approach as 82576 but has fewer
- entries as a result we carry over for queues greater than 4. */
- if (rx_queue > IGB_N0_QUEUE) {
- index = (rx_queue >> 1);
- ivar = array_rd32(E1000_IVAR0, index);
- if (rx_queue & 0x1) {
- /* vector goes into third byte of register */
- ivar = ivar & 0xFF00FFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
- } else {
- /* vector goes into low byte of register */
- ivar = ivar & 0xFFFFFF00;
- ivar |= msix_vector | E1000_IVAR_VALID;
- }
- array_wr32(E1000_IVAR0, index, ivar);
- }
- if (tx_queue > IGB_N0_QUEUE) {
- index = (tx_queue >> 1);
- ivar = array_rd32(E1000_IVAR0, index);
- if (tx_queue & 0x1) {
- /* vector goes into high byte of register */
- ivar = ivar & 0x00FFFFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
- } else {
- /* vector goes into second byte of register */
- ivar = ivar & 0xFFFF00FF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
- }
- array_wr32(E1000_IVAR0, index, ivar);
- }
- q_vector->eims_value = 1 << msix_vector;
- break;
- default:
- BUG();
- break;
- }
-
- /* add q_vector eims value to global eims_enable_mask */
- adapter->eims_enable_mask |= q_vector->eims_value;
-
- /* configure q_vector to set itr on first interrupt */
- q_vector->set_itr = 1;
-}
-
-/**
- * igb_configure_msix - Configure MSI-X hardware
- *
- * igb_configure_msix sets up the hardware to properly
- * generate MSI-X interrupts.
- **/
-static void igb_configure_msix(struct igb_adapter *adapter)
-{
- u32 tmp;
- int i, vector = 0;
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->eims_enable_mask = 0;
-
- /* set vector for other causes, i.e. link changes */
- switch (hw->mac.type) {
- case e1000_82575:
- tmp = rd32(E1000_CTRL_EXT);
- /* enable MSI-X PBA support*/
- tmp |= E1000_CTRL_EXT_PBA_CLR;
-
- /* Auto-Mask interrupts upon ICR read. */
- tmp |= E1000_CTRL_EXT_EIAME;
- tmp |= E1000_CTRL_EXT_IRCA;
-
- wr32(E1000_CTRL_EXT, tmp);
-
- /* enable msix_other interrupt */
- array_wr32(E1000_MSIXBM(0), vector++,
- E1000_EIMS_OTHER);
- adapter->eims_other = E1000_EIMS_OTHER;
-
- break;
-
- case e1000_82576:
- case e1000_82580:
- case e1000_i350:
- /* Turn on MSI-X capability first, or our settings
- * won't stick. And it will take days to debug. */
- wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
- E1000_GPIE_PBA | E1000_GPIE_EIAME |
- E1000_GPIE_NSICR);
-
- /* enable msix_other interrupt */
- adapter->eims_other = 1 << vector;
- tmp = (vector++ | E1000_IVAR_VALID) << 8;
-
- wr32(E1000_IVAR_MISC, tmp);
- break;
- default:
- /* do nothing, since nothing else supports MSI-X */
- break;
- } /* switch (hw->mac.type) */
-
- adapter->eims_enable_mask |= adapter->eims_other;
-
- for (i = 0; i < adapter->num_q_vectors; i++)
- igb_assign_vector(adapter->q_vector[i], vector++);
-
- wrfl();
-}
-
-/**
- * igb_request_msix - Initialize MSI-X interrupts
- *
- * igb_request_msix allocates MSI-X vectors and requests interrupts from the
- * kernel.
- **/
-static int igb_request_msix(struct igb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- int i, err = 0, vector = 0;
-
- err = request_irq(adapter->msix_entries[vector].vector,
- igb_msix_other, 0, netdev->name, adapter);
- if (err)
- goto out;
- vector++;
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
-
- q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
-
- if (q_vector->rx_ring && q_vector->tx_ring)
- sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
- q_vector->rx_ring->queue_index);
- else if (q_vector->tx_ring)
- sprintf(q_vector->name, "%s-tx-%u", netdev->name,
- q_vector->tx_ring->queue_index);
- else if (q_vector->rx_ring)
- sprintf(q_vector->name, "%s-rx-%u", netdev->name,
- q_vector->rx_ring->queue_index);
- else
- sprintf(q_vector->name, "%s-unused", netdev->name);
-
- err = request_irq(adapter->msix_entries[vector].vector,
- igb_msix_ring, 0, q_vector->name,
- q_vector);
- if (err)
- goto out;
- vector++;
- }
-
- igb_configure_msix(adapter);
- return 0;
-out:
- return err;
-}
-
-static void igb_reset_interrupt_capability(struct igb_adapter *adapter)
-{
- if (adapter->msix_entries) {
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else if (adapter->flags & IGB_FLAG_HAS_MSI) {
- pci_disable_msi(adapter->pdev);
- }
-}
-
-/**
- * igb_free_q_vectors - Free memory allocated for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * This function frees the memory allocated to the q_vectors. In addition if
- * NAPI is enabled it will delete any references to the NAPI struct prior
- * to freeing the q_vector.
- **/
-static void igb_free_q_vectors(struct igb_adapter *adapter)
-{
- int v_idx;
-
- for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
- struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
- adapter->q_vector[v_idx] = NULL;
- if (!q_vector)
- continue;
- netif_napi_del(&q_vector->napi);
- kfree(q_vector);
- }
- adapter->num_q_vectors = 0;
-}
-
-/**
- * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
- *
- * This function resets the device so that it has 0 rx queues, tx queues, and
- * MSI-X interrupts allocated.
- */
-static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
-{
- igb_free_queues(adapter);
- igb_free_q_vectors(adapter);
- igb_reset_interrupt_capability(adapter);
-}
-
-/**
- * igb_set_interrupt_capability - set MSI or MSI-X if supported
- *
- * Attempt to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int igb_set_interrupt_capability(struct igb_adapter *adapter)
-{
- int err;
- int numvecs, i;
-
- /* Number of supported queues. */
- adapter->num_rx_queues = adapter->rss_queues;
- if (adapter->vfs_allocated_count)
- adapter->num_tx_queues = 1;
- else
- adapter->num_tx_queues = adapter->rss_queues;
-
- /* start with one vector for every rx queue */
- numvecs = adapter->num_rx_queues;
-
- /* if tx handler is separate add 1 for every tx queue */
- if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS))
- numvecs += adapter->num_tx_queues;
-
- /* store the number of vectors reserved for queues */
- adapter->num_q_vectors = numvecs;
-
- /* add 1 vector for link status interrupts */
- numvecs++;
- adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
- GFP_KERNEL);
- if (!adapter->msix_entries)
- goto msi_only;
-
- for (i = 0; i < numvecs; i++)
- adapter->msix_entries[i].entry = i;
-
- err = pci_enable_msix(adapter->pdev,
- adapter->msix_entries,
- numvecs);
- if (err == 0)
- goto out;
-
- igb_reset_interrupt_capability(adapter);
-
- /* If we can't do MSI-X, try MSI */
-msi_only:
-#ifdef CONFIG_PCI_IOV
- /* disable SR-IOV for non MSI-X configurations */
- if (adapter->vf_data) {
- struct e1000_hw *hw = &adapter->hw;
- /* disable iov and allow time for transactions to clear */
- pci_disable_sriov(adapter->pdev);
- msleep(500);
-
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
- wrfl();
- msleep(100);
- dev_info(&adapter->pdev->dev, "IOV Disabled\n");
- }
-#endif
- adapter->vfs_allocated_count = 0;
- adapter->rss_queues = 1;
- adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
- adapter->num_q_vectors = 1;
- if (!pci_enable_msi(adapter->pdev))
- adapter->flags |= IGB_FLAG_HAS_MSI;
-out:
- /* Notify the stack of the (possibly) reduced queue counts. */
- netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
- return netif_set_real_num_rx_queues(adapter->netdev,
- adapter->num_rx_queues);
-}
-
-/**
- * igb_alloc_q_vectors - Allocate memory for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * We allocate one q_vector per queue interrupt. If allocation fails we
- * return -ENOMEM.
- **/
-static int igb_alloc_q_vectors(struct igb_adapter *adapter)
-{
- struct igb_q_vector *q_vector;
- struct e1000_hw *hw = &adapter->hw;
- int v_idx;
-
- for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
- q_vector = kzalloc(sizeof(struct igb_q_vector), GFP_KERNEL);
- if (!q_vector)
- goto err_out;
- q_vector->adapter = adapter;
- q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
- q_vector->itr_val = IGB_START_ITR;
- netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
- adapter->q_vector[v_idx] = q_vector;
- }
- return 0;
-
-err_out:
- igb_free_q_vectors(adapter);
- return -ENOMEM;
-}
-
-static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
- int ring_idx, int v_idx)
-{
- struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
-
- q_vector->rx_ring = adapter->rx_ring[ring_idx];
- q_vector->rx_ring->q_vector = q_vector;
- q_vector->itr_val = adapter->rx_itr_setting;
- if (q_vector->itr_val && q_vector->itr_val <= 3)
- q_vector->itr_val = IGB_START_ITR;
-}
-
-static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
- int ring_idx, int v_idx)
-{
- struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
-
- q_vector->tx_ring = adapter->tx_ring[ring_idx];
- q_vector->tx_ring->q_vector = q_vector;
- q_vector->itr_val = adapter->tx_itr_setting;
- if (q_vector->itr_val && q_vector->itr_val <= 3)
- q_vector->itr_val = IGB_START_ITR;
-}
-
-/**
- * igb_map_ring_to_vector - maps allocated queues to vectors
- *
- * This function maps the recently allocated queues to vectors.
- **/
-static int igb_map_ring_to_vector(struct igb_adapter *adapter)
-{
- int i;
- int v_idx = 0;
-
- if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
- (adapter->num_q_vectors < adapter->num_tx_queues))
- return -ENOMEM;
-
- if (adapter->num_q_vectors >=
- (adapter->num_rx_queues + adapter->num_tx_queues)) {
- for (i = 0; i < adapter->num_rx_queues; i++)
- igb_map_rx_ring_to_vector(adapter, i, v_idx++);
- for (i = 0; i < adapter->num_tx_queues; i++)
- igb_map_tx_ring_to_vector(adapter, i, v_idx++);
- } else {
- for (i = 0; i < adapter->num_rx_queues; i++) {
- if (i < adapter->num_tx_queues)
- igb_map_tx_ring_to_vector(adapter, i, v_idx);
- igb_map_rx_ring_to_vector(adapter, i, v_idx++);
- }
- for (; i < adapter->num_tx_queues; i++)
- igb_map_tx_ring_to_vector(adapter, i, v_idx++);
- }
- return 0;
-}
-
-/**
- * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
- *
- * This function initializes the interrupts and allocates all of the queues.
- **/
-static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int err;
-
- err = igb_set_interrupt_capability(adapter);
- if (err)
- return err;
-
- err = igb_alloc_q_vectors(adapter);
- if (err) {
- dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
- goto err_alloc_q_vectors;
- }
-
- err = igb_alloc_queues(adapter);
- if (err) {
- dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
- goto err_alloc_queues;
- }
-
- err = igb_map_ring_to_vector(adapter);
- if (err) {
- dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
- goto err_map_queues;
- }
-
-
- return 0;
-err_map_queues:
- igb_free_queues(adapter);
-err_alloc_queues:
- igb_free_q_vectors(adapter);
-err_alloc_q_vectors:
- igb_reset_interrupt_capability(adapter);
- return err;
-}
-
-/**
- * igb_request_irq - initialize interrupts
- *
- * Attempts to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int igb_request_irq(struct igb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- int err = 0;
-
- if (adapter->msix_entries) {
- err = igb_request_msix(adapter);
- if (!err)
- goto request_done;
- /* fall back to MSI */
- igb_clear_interrupt_scheme(adapter);
- if (!pci_enable_msi(adapter->pdev))
- adapter->flags |= IGB_FLAG_HAS_MSI;
- igb_free_all_tx_resources(adapter);
- igb_free_all_rx_resources(adapter);
- adapter->num_tx_queues = 1;
- adapter->num_rx_queues = 1;
- adapter->num_q_vectors = 1;
- err = igb_alloc_q_vectors(adapter);
- if (err) {
- dev_err(&pdev->dev,
- "Unable to allocate memory for vectors\n");
- goto request_done;
- }
- err = igb_alloc_queues(adapter);
- if (err) {
- dev_err(&pdev->dev,
- "Unable to allocate memory for queues\n");
- igb_free_q_vectors(adapter);
- goto request_done;
- }
- igb_setup_all_tx_resources(adapter);
- igb_setup_all_rx_resources(adapter);
- } else {
- igb_assign_vector(adapter->q_vector[0], 0);
- }
-
- if (adapter->flags & IGB_FLAG_HAS_MSI) {
- err = request_irq(adapter->pdev->irq, igb_intr_msi, 0,
- netdev->name, adapter);
- if (!err)
- goto request_done;
-
- /* fall back to legacy interrupts */
- igb_reset_interrupt_capability(adapter);
- adapter->flags &= ~IGB_FLAG_HAS_MSI;
- }
-
- err = request_irq(adapter->pdev->irq, igb_intr, IRQF_SHARED,
- netdev->name, adapter);
-
- if (err)
- dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
- err);
-
-request_done:
- return err;
-}
-
-static void igb_free_irq(struct igb_adapter *adapter)
-{
- if (adapter->msix_entries) {
- int vector = 0, i;
-
- free_irq(adapter->msix_entries[vector++].vector, adapter);
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- free_irq(adapter->msix_entries[vector++].vector,
- q_vector);
- }
- } else {
- free_irq(adapter->pdev->irq, adapter);
- }
-}
-
-/**
- * igb_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-static void igb_irq_disable(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /*
- * we need to be careful when disabling interrupts. The VFs are also
- * mapped into these registers and so clearing the bits can cause
- * issues on the VF drivers so we only need to clear what we set
- */
- if (adapter->msix_entries) {
- u32 regval = rd32(E1000_EIAM);
- wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
- wr32(E1000_EIMC, adapter->eims_enable_mask);
- regval = rd32(E1000_EIAC);
- wr32(E1000_EIAC, regval & ~adapter->eims_enable_mask);
- }
-
- wr32(E1000_IAM, 0);
- wr32(E1000_IMC, ~0);
- wrfl();
- if (adapter->msix_entries) {
- int i;
- for (i = 0; i < adapter->num_q_vectors; i++)
- synchronize_irq(adapter->msix_entries[i].vector);
- } else {
- synchronize_irq(adapter->pdev->irq);
- }
-}
-
-/**
- * igb_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-static void igb_irq_enable(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (adapter->msix_entries) {
- u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
- u32 regval = rd32(E1000_EIAC);
- wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
- regval = rd32(E1000_EIAM);
- wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
- wr32(E1000_EIMS, adapter->eims_enable_mask);
- if (adapter->vfs_allocated_count) {
- wr32(E1000_MBVFIMR, 0xFF);
- ims |= E1000_IMS_VMMB;
- }
- if (adapter->hw.mac.type == e1000_82580)
- ims |= E1000_IMS_DRSTA;
-
- wr32(E1000_IMS, ims);
- } else {
- wr32(E1000_IMS, IMS_ENABLE_MASK |
- E1000_IMS_DRSTA);
- wr32(E1000_IAM, IMS_ENABLE_MASK |
- E1000_IMS_DRSTA);
- }
-}
-
-static void igb_update_mng_vlan(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 vid = adapter->hw.mng_cookie.vlan_id;
- u16 old_vid = adapter->mng_vlan_id;
-
- if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
- /* add VID to filter table */
- igb_vfta_set(hw, vid, true);
- adapter->mng_vlan_id = vid;
- } else {
- adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
- }
-
- if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
- (vid != old_vid) &&
- !test_bit(old_vid, adapter->active_vlans)) {
- /* remove VID from filter table */
- igb_vfta_set(hw, old_vid, false);
- }
-}
-
-/**
- * igb_release_hw_control - release control of the h/w to f/w
- * @adapter: address of board private structure
- *
- * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that the
- * driver is no longer loaded.
- *
- **/
-static void igb_release_hw_control(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_ext;
-
- /* Let firmware take over control of h/w */
- ctrl_ext = rd32(E1000_CTRL_EXT);
- wr32(E1000_CTRL_EXT,
- ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
-}
-
-/**
- * igb_get_hw_control - get control of the h/w from f/w
- * @adapter: address of board private structure
- *
- * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
- * For ASF and Pass Through versions of f/w this means that
- * the driver is loaded.
- *
- **/
-static void igb_get_hw_control(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl_ext;
-
- /* Let firmware know the driver has taken over */
- ctrl_ext = rd32(E1000_CTRL_EXT);
- wr32(E1000_CTRL_EXT,
- ctrl_ext | E1000_CTRL_EXT_DRV_LOAD);
-}
-
-/**
- * igb_configure - configure the hardware for RX and TX
- * @adapter: private board structure
- **/
-static void igb_configure(struct igb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int i;
-
- igb_get_hw_control(adapter);
- igb_set_rx_mode(netdev);
-
- igb_restore_vlan(adapter);
-
- igb_setup_tctl(adapter);
- igb_setup_mrqc(adapter);
- igb_setup_rctl(adapter);
-
- igb_configure_tx(adapter);
- igb_configure_rx(adapter);
-
- igb_rx_fifo_flush_82575(&adapter->hw);
-
- /* call igb_desc_unused which always leaves
- * at least 1 descriptor unused to make sure
- * next_to_use != next_to_clean */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct igb_ring *ring = adapter->rx_ring[i];
- igb_alloc_rx_buffers_adv(ring, igb_desc_unused(ring));
- }
-}
-
-/**
- * igb_power_up_link - Power up the phy/serdes link
- * @adapter: address of board private structure
- **/
-void igb_power_up_link(struct igb_adapter *adapter)
-{
- if (adapter->hw.phy.media_type == e1000_media_type_copper)
- igb_power_up_phy_copper(&adapter->hw);
- else
- igb_power_up_serdes_link_82575(&adapter->hw);
-}
-
-/**
- * igb_power_down_link - Power down the phy/serdes link
- * @adapter: address of board private structure
- */
-static void igb_power_down_link(struct igb_adapter *adapter)
-{
- if (adapter->hw.phy.media_type == e1000_media_type_copper)
- igb_power_down_phy_copper_82575(&adapter->hw);
- else
- igb_shutdown_serdes_link_82575(&adapter->hw);
-}
-
-/**
- * igb_up - Open the interface and prepare it to handle traffic
- * @adapter: board private structure
- **/
-int igb_up(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- int i;
-
- /* hardware has been reset, we need to reload some things */
- igb_configure(adapter);
-
- clear_bit(__IGB_DOWN, &adapter->state);
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- napi_enable(&q_vector->napi);
- }
- if (adapter->msix_entries)
- igb_configure_msix(adapter);
- else
- igb_assign_vector(adapter->q_vector[0], 0);
-
- /* Clear any pending interrupts. */
- rd32(E1000_ICR);
- igb_irq_enable(adapter);
-
- /* notify VFs that reset has been completed */
- if (adapter->vfs_allocated_count) {
- u32 reg_data = rd32(E1000_CTRL_EXT);
- reg_data |= E1000_CTRL_EXT_PFRSTD;
- wr32(E1000_CTRL_EXT, reg_data);
- }
-
- netif_tx_start_all_queues(adapter->netdev);
-
- /* start the watchdog. */
- hw->mac.get_link_status = 1;
- schedule_work(&adapter->watchdog_task);
-
- return 0;
-}
-
-void igb_down(struct igb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 tctl, rctl;
- int i;
-
- /* signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer */
- set_bit(__IGB_DOWN, &adapter->state);
-
- /* disable receives in the hardware */
- rctl = rd32(E1000_RCTL);
- wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
- /* flush and sleep below */
-
- netif_tx_stop_all_queues(netdev);
-
- /* disable transmits in the hardware */
- tctl = rd32(E1000_TCTL);
- tctl &= ~E1000_TCTL_EN;
- wr32(E1000_TCTL, tctl);
- /* flush both disables and wait for them to finish */
- wrfl();
- msleep(10);
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- napi_disable(&q_vector->napi);
- }
-
- igb_irq_disable(adapter);
-
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- netif_carrier_off(netdev);
-
- /* record the stats before reset*/
- spin_lock(&adapter->stats64_lock);
- igb_update_stats(adapter, &adapter->stats64);
- spin_unlock(&adapter->stats64_lock);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- if (!pci_channel_offline(adapter->pdev))
- igb_reset(adapter);
- igb_clean_all_tx_rings(adapter);
- igb_clean_all_rx_rings(adapter);
-#ifdef CONFIG_IGB_DCA
-
- /* since we reset the hardware DCA settings were cleared */
- igb_setup_dca(adapter);
-#endif
-}
-
-void igb_reinit_locked(struct igb_adapter *adapter)
-{
- WARN_ON(in_interrupt());
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
- igb_down(adapter);
- igb_up(adapter);
- clear_bit(__IGB_RESETTING, &adapter->state);
-}
-
-void igb_reset(struct igb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
- struct e1000_mac_info *mac = &hw->mac;
- struct e1000_fc_info *fc = &hw->fc;
- u32 pba = 0, tx_space, min_tx_space, min_rx_space;
- u16 hwm;
-
- /* Repartition Pba for greater than 9k mtu
- * To take effect CTRL.RST is required.
- */
- switch (mac->type) {
- case e1000_i350:
- case e1000_82580:
- pba = rd32(E1000_RXPBS);
- pba = igb_rxpbs_adjust_82580(pba);
- break;
- case e1000_82576:
- pba = rd32(E1000_RXPBS);
- pba &= E1000_RXPBS_SIZE_MASK_82576;
- break;
- case e1000_82575:
- default:
- pba = E1000_PBA_34K;
- break;
- }
-
- if ((adapter->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN) &&
- (mac->type < e1000_82576)) {
- /* adjust PBA for jumbo frames */
- wr32(E1000_PBA, pba);
-
- /* To maintain wire speed transmits, the Tx FIFO should be
- * large enough to accommodate two full transmit packets,
- * rounded up to the next 1KB and expressed in KB. Likewise,
- * the Rx FIFO should be large enough to accommodate at least
- * one full receive packet and is similarly rounded up and
- * expressed in KB. */
- pba = rd32(E1000_PBA);
- /* upper 16 bits has Tx packet buffer allocation size in KB */
- tx_space = pba >> 16;
- /* lower 16 bits has Rx packet buffer allocation size in KB */
- pba &= 0xffff;
- /* the tx fifo also stores 16 bytes of information about the tx
- * but don't include ethernet FCS because hardware appends it */
- min_tx_space = (adapter->max_frame_size +
- sizeof(union e1000_adv_tx_desc) -
- ETH_FCS_LEN) * 2;
- min_tx_space = ALIGN(min_tx_space, 1024);
- min_tx_space >>= 10;
- /* software strips receive CRC, so leave room for it */
- min_rx_space = adapter->max_frame_size;
- min_rx_space = ALIGN(min_rx_space, 1024);
- min_rx_space >>= 10;
-
- /* If current Tx allocation is less than the min Tx FIFO size,
- * and the min Tx FIFO size is less than the current Rx FIFO
- * allocation, take space away from current Rx allocation */
- if (tx_space < min_tx_space &&
- ((min_tx_space - tx_space) < pba)) {
- pba = pba - (min_tx_space - tx_space);
-
- /* if short on rx space, rx wins and must trump tx
- * adjustment */
- if (pba < min_rx_space)
- pba = min_rx_space;
- }
- wr32(E1000_PBA, pba);
- }
-
- /* flow control settings */
- /* The high water mark must be low enough to fit one full frame
- * (or the size used for early receive) above it in the Rx FIFO.
- * Set it to the lower of:
- * - 90% of the Rx FIFO size, or
- * - the full Rx FIFO size minus one full frame */
- hwm = min(((pba << 10) * 9 / 10),
- ((pba << 10) - 2 * adapter->max_frame_size));
-
- fc->high_water = hwm & 0xFFF0; /* 16-byte granularity */
- fc->low_water = fc->high_water - 16;
- fc->pause_time = 0xFFFF;
- fc->send_xon = 1;
- fc->current_mode = fc->requested_mode;
-
- /* disable receive for all VFs and wait one second */
- if (adapter->vfs_allocated_count) {
- int i;
- for (i = 0 ; i < adapter->vfs_allocated_count; i++)
- adapter->vf_data[i].flags &= IGB_VF_FLAG_PF_SET_MAC;
-
- /* ping all the active vfs to let them know we are going down */
- igb_ping_all_vfs(adapter);
-
- /* disable transmits and receives */
- wr32(E1000_VFRE, 0);
- wr32(E1000_VFTE, 0);
- }
-
- /* Allow time for pending master requests to run */
- hw->mac.ops.reset_hw(hw);
- wr32(E1000_WUC, 0);
-
- if (hw->mac.ops.init_hw(hw))
- dev_err(&pdev->dev, "Hardware Error\n");
- if (hw->mac.type > e1000_82580) {
- if (adapter->flags & IGB_FLAG_DMAC) {
- u32 reg;
-
- /*
- * DMA Coalescing high water mark needs to be higher
- * than * the * Rx threshold. The Rx threshold is
- * currently * pba - 6, so we * should use a high water
- * mark of pba * - 4. */
- hwm = (pba - 4) << 10;
-
- reg = (((pba-6) << E1000_DMACR_DMACTHR_SHIFT)
- & E1000_DMACR_DMACTHR_MASK);
-
- /* transition to L0x or L1 if available..*/
- reg |= (E1000_DMACR_DMAC_EN | E1000_DMACR_DMAC_LX_MASK);
-
- /* watchdog timer= +-1000 usec in 32usec intervals */
- reg |= (1000 >> 5);
- wr32(E1000_DMACR, reg);
-
- /* no lower threshold to disable coalescing(smart fifb)
- * -UTRESH=0*/
- wr32(E1000_DMCRTRH, 0);
-
- /* set hwm to PBA - 2 * max frame size */
- wr32(E1000_FCRTC, hwm);
-
- /*
- * This sets the time to wait before requesting tran-
- * sition to * low power state to number of usecs needed
- * to receive 1 512 * byte frame at gigabit line rate
- */
- reg = rd32(E1000_DMCTLX);
- reg |= IGB_DMCTLX_DCFLUSH_DIS;
-
- /* Delay 255 usec before entering Lx state. */
- reg |= 0xFF;
- wr32(E1000_DMCTLX, reg);
-
- /* free space in Tx packet buffer to wake from DMAC */
- wr32(E1000_DMCTXTH,
- (IGB_MIN_TXPBSIZE -
- (IGB_TX_BUF_4096 + adapter->max_frame_size))
- >> 6);
-
- /* make low power state decision controlled by DMAC */
- reg = rd32(E1000_PCIEMISC);
- reg |= E1000_PCIEMISC_LX_DECISION;
- wr32(E1000_PCIEMISC, reg);
- } /* end if IGB_FLAG_DMAC set */
- }
- if (hw->mac.type == e1000_82580) {
- u32 reg = rd32(E1000_PCIEMISC);
- wr32(E1000_PCIEMISC,
- reg & ~E1000_PCIEMISC_LX_DECISION);
- }
- if (!netif_running(adapter->netdev))
- igb_power_down_link(adapter);
-
- igb_update_mng_vlan(adapter);
-
- /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
- wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
-
- igb_get_phy_info(hw);
-}
-
-static u32 igb_fix_features(struct net_device *netdev, u32 features)
-{
- /*
- * Since there is no support for separate rx/tx vlan accel
- * enable/disable make sure tx flag is always in same state as rx.
- */
- if (features & NETIF_F_HW_VLAN_RX)
- features |= NETIF_F_HW_VLAN_TX;
- else
- features &= ~NETIF_F_HW_VLAN_TX;
-
- return features;
-}
-
-static int igb_set_features(struct net_device *netdev, u32 features)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- int i;
- u32 changed = netdev->features ^ features;
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- if (features & NETIF_F_RXCSUM)
- adapter->rx_ring[i]->flags |= IGB_RING_FLAG_RX_CSUM;
- else
- adapter->rx_ring[i]->flags &= ~IGB_RING_FLAG_RX_CSUM;
- }
-
- if (changed & NETIF_F_HW_VLAN_RX)
- igb_vlan_mode(netdev, features);
-
- return 0;
-}
-
-static const struct net_device_ops igb_netdev_ops = {
- .ndo_open = igb_open,
- .ndo_stop = igb_close,
- .ndo_start_xmit = igb_xmit_frame_adv,
- .ndo_get_stats64 = igb_get_stats64,
- .ndo_set_rx_mode = igb_set_rx_mode,
- .ndo_set_multicast_list = igb_set_rx_mode,
- .ndo_set_mac_address = igb_set_mac,
- .ndo_change_mtu = igb_change_mtu,
- .ndo_do_ioctl = igb_ioctl,
- .ndo_tx_timeout = igb_tx_timeout,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_vlan_rx_add_vid = igb_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = igb_vlan_rx_kill_vid,
- .ndo_set_vf_mac = igb_ndo_set_vf_mac,
- .ndo_set_vf_vlan = igb_ndo_set_vf_vlan,
- .ndo_set_vf_tx_rate = igb_ndo_set_vf_bw,
- .ndo_get_vf_config = igb_ndo_get_vf_config,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = igb_netpoll,
-#endif
- .ndo_fix_features = igb_fix_features,
- .ndo_set_features = igb_set_features,
-};
-
-/**
- * igb_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in igb_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * igb_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit igb_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct igb_adapter *adapter;
- struct e1000_hw *hw;
- u16 eeprom_data = 0;
- s32 ret_val;
- static int global_quad_port_a; /* global quad port a indication */
- const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
- unsigned long mmio_start, mmio_len;
- int err, pci_using_dac;
- u16 eeprom_apme_mask = IGB_EEPROM_APME;
- u8 part_str[E1000_PBANUM_LENGTH];
-
- /* Catch broken hardware that put the wrong VF device ID in
- * the PCIe SR-IOV capability.
- */
- if (pdev->is_virtfn) {
- WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
- pci_name(pdev), pdev->vendor, pdev->device);
- return -EINVAL;
- }
-
- err = pci_enable_device_mem(pdev);
- if (err)
- return err;
-
- pci_using_dac = 0;
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err)
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
- goto err_dma;
- }
- }
- }
-
- err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM),
- igb_driver_name);
- if (err)
- goto err_pci_reg;
-
- pci_enable_pcie_error_reporting(pdev);
-
- pci_set_master(pdev);
- pci_save_state(pdev);
-
- err = -ENOMEM;
- netdev = alloc_etherdev_mq(sizeof(struct igb_adapter),
- IGB_ABS_MAX_TX_QUEUES);
- if (!netdev)
- goto err_alloc_etherdev;
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- hw = &adapter->hw;
- hw->back = adapter;
- adapter->msg_enable = NETIF_MSG_DRV | NETIF_MSG_PROBE;
-
- mmio_start = pci_resource_start(pdev, 0);
- mmio_len = pci_resource_len(pdev, 0);
-
- err = -EIO;
- hw->hw_addr = ioremap(mmio_start, mmio_len);
- if (!hw->hw_addr)
- goto err_ioremap;
-
- netdev->netdev_ops = &igb_netdev_ops;
- igb_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
-
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- netdev->mem_start = mmio_start;
- netdev->mem_end = mmio_start + mmio_len;
-
- /* PCI config space info */
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->revision_id = pdev->revision;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_device_id = pdev->subsystem_device;
-
- /* Copy the default MAC, PHY and NVM function pointers */
- memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
- memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
- memcpy(&hw->nvm.ops, ei->nvm_ops, sizeof(hw->nvm.ops));
- /* Initialize skew-specific constants */
- err = ei->get_invariants(hw);
- if (err)
- goto err_sw_init;
-
- /* setup the private structure */
- err = igb_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- igb_get_bus_info_pcie(hw);
-
- hw->phy.autoneg_wait_to_complete = false;
-
- /* Copper options */
- if (hw->phy.media_type == e1000_media_type_copper) {
- hw->phy.mdix = AUTO_ALL_MODES;
- hw->phy.disable_polarity_correction = false;
- hw->phy.ms_type = e1000_ms_hw_default;
- }
-
- if (igb_check_reset_block(hw))
- dev_info(&pdev->dev,
- "PHY reset is blocked due to SOL/IDER session.\n");
-
- netdev->hw_features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_RXCSUM |
- NETIF_F_HW_VLAN_RX;
-
- netdev->features = netdev->hw_features |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_FILTER;
-
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
- netdev->vlan_features |= NETIF_F_IP_CSUM;
- netdev->vlan_features |= NETIF_F_IPV6_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- if (hw->mac.type >= e1000_82576) {
- netdev->hw_features |= NETIF_F_SCTP_CSUM;
- netdev->features |= NETIF_F_SCTP_CSUM;
- }
-
- adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
-
- /* before reading the NVM, reset the controller to put the device in a
- * known good starting state */
- hw->mac.ops.reset_hw(hw);
-
- /* make sure the NVM is good */
- if (hw->nvm.ops.validate(hw) < 0) {
- dev_err(&pdev->dev, "The NVM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- /* copy the MAC address out of the NVM */
- if (hw->mac.ops.read_mac_addr(hw))
- dev_err(&pdev->dev, "NVM Read Error\n");
-
- memcpy(netdev->dev_addr, hw->mac.addr, netdev->addr_len);
- memcpy(netdev->perm_addr, hw->mac.addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- dev_err(&pdev->dev, "Invalid MAC Address\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- setup_timer(&adapter->watchdog_timer, igb_watchdog,
- (unsigned long) adapter);
- setup_timer(&adapter->phy_info_timer, igb_update_phy_info,
- (unsigned long) adapter);
-
- INIT_WORK(&adapter->reset_task, igb_reset_task);
- INIT_WORK(&adapter->watchdog_task, igb_watchdog_task);
-
- /* Initialize link properties that are user-changeable */
- adapter->fc_autoneg = true;
- hw->mac.autoneg = true;
- hw->phy.autoneg_advertised = 0x2f;
-
- hw->fc.requested_mode = e1000_fc_default;
- hw->fc.current_mode = e1000_fc_default;
-
- igb_validate_mdi_setting(hw);
-
- /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
- * enable the ACPI Magic Packet filter
- */
-
- if (hw->bus.func == 0)
- hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
- else if (hw->mac.type >= e1000_82580)
- hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A +
- NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1,
- &eeprom_data);
- else if (hw->bus.func == 1)
- hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
-
- if (eeprom_data & eeprom_apme_mask)
- adapter->eeprom_wol |= E1000_WUFC_MAG;
-
- /* now that we have the eeprom settings, apply the special cases where
- * the eeprom may be wrong or the board simply won't support wake on
- * lan on a particular port */
- switch (pdev->device) {
- case E1000_DEV_ID_82575GB_QUAD_COPPER:
- adapter->eeprom_wol = 0;
- break;
- case E1000_DEV_ID_82575EB_FIBER_SERDES:
- case E1000_DEV_ID_82576_FIBER:
- case E1000_DEV_ID_82576_SERDES:
- /* Wake events only supported on port A for dual fiber
- * regardless of eeprom setting */
- if (rd32(E1000_STATUS) & E1000_STATUS_FUNC_1)
- adapter->eeprom_wol = 0;
- break;
- case E1000_DEV_ID_82576_QUAD_COPPER:
- case E1000_DEV_ID_82576_QUAD_COPPER_ET2:
- /* if quad port adapter, disable WoL on all but port A */
- if (global_quad_port_a != 0)
- adapter->eeprom_wol = 0;
- else
- adapter->flags |= IGB_FLAG_QUAD_PORT_A;
- /* Reset for multiple quad port adapters */
- if (++global_quad_port_a == 4)
- global_quad_port_a = 0;
- break;
- }
-
- /* initialize the wol settings based on the eeprom settings */
- adapter->wol = adapter->eeprom_wol;
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- /* reset the hardware with the new settings */
- igb_reset(adapter);
-
- /* let the f/w know that the h/w is now under the control of the
- * driver. */
- igb_get_hw_control(adapter);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- igb_vlan_mode(netdev, netdev->features);
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
-#ifdef CONFIG_IGB_DCA
- if (dca_add_requester(&pdev->dev) == 0) {
- adapter->flags |= IGB_FLAG_DCA_ENABLED;
- dev_info(&pdev->dev, "DCA enabled\n");
- igb_setup_dca(adapter);
- }
-
-#endif
- /* do hw tstamp init after resetting */
- igb_init_hw_timer(adapter);
-
- dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
- /* print bus type/speed/width info */
- dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
- netdev->name,
- ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
- (hw->bus.speed == e1000_bus_speed_5000) ? "5.0Gb/s" :
- "unknown"),
- ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
- (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
- (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
- "unknown"),
- netdev->dev_addr);
-
- ret_val = igb_read_part_string(hw, part_str, E1000_PBANUM_LENGTH);
- if (ret_val)
- strcpy(part_str, "Unknown");
- dev_info(&pdev->dev, "%s: PBA No: %s\n", netdev->name, part_str);
- dev_info(&pdev->dev,
- "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
- adapter->msix_entries ? "MSI-X" :
- (adapter->flags & IGB_FLAG_HAS_MSI) ? "MSI" : "legacy",
- adapter->num_rx_queues, adapter->num_tx_queues);
- switch (hw->mac.type) {
- case e1000_i350:
- igb_set_eee_i350(hw);
- break;
- default:
- break;
- }
- return 0;
-
-err_register:
- igb_release_hw_control(adapter);
-err_eeprom:
- if (!igb_check_reset_block(hw))
- igb_reset_phy(hw);
-
- if (hw->flash_address)
- iounmap(hw->flash_address);
-err_sw_init:
- igb_clear_interrupt_scheme(adapter);
- iounmap(hw->hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
-err_pci_reg:
-err_dma:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * igb_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * igb_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-static void __devexit igb_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- /*
- * The watchdog timer may be rescheduled, so explicitly
- * disable watchdog from being rescheduled.
- */
- set_bit(__IGB_DOWN, &adapter->state);
- del_timer_sync(&adapter->watchdog_timer);
- del_timer_sync(&adapter->phy_info_timer);
-
- cancel_work_sync(&adapter->reset_task);
- cancel_work_sync(&adapter->watchdog_task);
-
-#ifdef CONFIG_IGB_DCA
- if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
- dev_info(&pdev->dev, "DCA disabled\n");
- dca_remove_requester(&pdev->dev);
- adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
- wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
- }
-#endif
-
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
- igb_release_hw_control(adapter);
-
- unregister_netdev(netdev);
-
- igb_clear_interrupt_scheme(adapter);
-
-#ifdef CONFIG_PCI_IOV
- /* reclaim resources allocated to VFs */
- if (adapter->vf_data) {
- /* disable iov and allow time for transactions to clear */
- pci_disable_sriov(pdev);
- msleep(500);
-
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
- wr32(E1000_IOVCTL, E1000_IOVCTL_REUSE_VFQ);
- wrfl();
- msleep(100);
- dev_info(&pdev->dev, "IOV Disabled\n");
- }
-#endif
-
- iounmap(hw->hw_addr);
- if (hw->flash_address)
- iounmap(hw->flash_address);
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
-
- free_netdev(netdev);
-
- pci_disable_pcie_error_reporting(pdev);
-
- pci_disable_device(pdev);
-}
-
-/**
- * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
- * @adapter: board private structure to initialize
- *
- * This function initializes the vf specific data storage and then attempts to
- * allocate the VFs. The reason for ordering it this way is because it is much
- * mor expensive time wise to disable SR-IOV than it is to allocate and free
- * the memory for the VFs.
- **/
-static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
-{
-#ifdef CONFIG_PCI_IOV
- struct pci_dev *pdev = adapter->pdev;
-
- if (adapter->vfs_allocated_count) {
- adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
- sizeof(struct vf_data_storage),
- GFP_KERNEL);
- /* if allocation failed then we do not support SR-IOV */
- if (!adapter->vf_data) {
- adapter->vfs_allocated_count = 0;
- dev_err(&pdev->dev, "Unable to allocate memory for VF "
- "Data Storage\n");
- }
- }
-
- if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
- kfree(adapter->vf_data);
- adapter->vf_data = NULL;
-#endif /* CONFIG_PCI_IOV */
- adapter->vfs_allocated_count = 0;
-#ifdef CONFIG_PCI_IOV
- } else {
- unsigned char mac_addr[ETH_ALEN];
- int i;
- dev_info(&pdev->dev, "%d vfs allocated\n",
- adapter->vfs_allocated_count);
- for (i = 0; i < adapter->vfs_allocated_count; i++) {
- random_ether_addr(mac_addr);
- igb_set_vf_mac(adapter, i, mac_addr);
- }
- /* DMA Coalescing is not supported in IOV mode. */
- if (adapter->flags & IGB_FLAG_DMAC)
- adapter->flags &= ~IGB_FLAG_DMAC;
- }
-#endif /* CONFIG_PCI_IOV */
-}
-
-
-/**
- * igb_init_hw_timer - Initialize hardware timer used with IEEE 1588 timestamp
- * @adapter: board private structure to initialize
- *
- * igb_init_hw_timer initializes the function pointer and values for the hw
- * timer found in hardware.
- **/
-static void igb_init_hw_timer(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- switch (hw->mac.type) {
- case e1000_i350:
- case e1000_82580:
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /*
- * The 82580 timesync updates the system timer every 8ns by 8ns
- * and the value cannot be shifted. Instead we need to shift
- * the registers to generate a 64bit timer value. As a result
- * SYSTIMR/L/H, TXSTMPL/H, RXSTMPL/H all have to be shifted by
- * 24 in order to generate a larger value for synchronization.
- */
- adapter->cycles.shift = IGB_82580_TSYNC_SHIFT;
- /* disable system timer temporarily by setting bit 31 */
- wr32(E1000_TSAUXC, 0x80000000);
- wrfl();
-
- /* Set registers so that rollover occurs soon to test this. */
- wr32(E1000_SYSTIMR, 0x00000000);
- wr32(E1000_SYSTIML, 0x80000000);
- wr32(E1000_SYSTIMH, 0x000000FF);
- wrfl();
-
- /* enable system timer by clearing bit 31 */
- wr32(E1000_TSAUXC, 0x0);
- wrfl();
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82576:
- /*
- * Initialize hardware timer: we keep it running just in case
- * that some program needs it later on.
- */
- memset(&adapter->cycles, 0, sizeof(adapter->cycles));
- adapter->cycles.read = igb_read_clock;
- adapter->cycles.mask = CLOCKSOURCE_MASK(64);
- adapter->cycles.mult = 1;
- /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * subtracted at each clock tick. The drawbacks of a large
- * factor are a) that the clock register overflows more quickly
- * (not such a big deal) and b) that the increment per tick has
- * to fit into 24 bits. As a result we need to use a shift of
- * 19 so we can fit a value of 16 into the TIMINCA register.
- */
- adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
- wr32(E1000_TIMINCA,
- (1 << E1000_TIMINCA_16NS_SHIFT) |
- (16 << IGB_82576_TSYNC_SHIFT));
-
- /* Set registers so that rollover occurs soon to test this. */
- wr32(E1000_SYSTIML, 0x00000000);
- wr32(E1000_SYSTIMH, 0xFF800000);
- wrfl();
-
- timecounter_init(&adapter->clock,
- &adapter->cycles,
- ktime_to_ns(ktime_get_real()));
- /*
- * Synchronize our NIC clock against system wall clock. NIC
- * time stamp reading requires ~3us per sample, each sample
- * was pretty stable even under load => only require 10
- * samples for each offset comparison.
- */
- memset(&adapter->compare, 0, sizeof(adapter->compare));
- adapter->compare.source = &adapter->clock;
- adapter->compare.target = ktime_get_real;
- adapter->compare.num_samples = 10;
- timecompare_update(&adapter->compare, 0);
- break;
- case e1000_82575:
- /* 82575 does not support timesync */
- default:
- break;
- }
-
-}
-
-/**
- * igb_sw_init - Initialize general software structures (struct igb_adapter)
- * @adapter: board private structure to initialize
- *
- * igb_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int __devinit igb_sw_init(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- pci_read_config_word(pdev, PCI_COMMAND, &hw->bus.pci_cmd_word);
-
- adapter->tx_ring_count = IGB_DEFAULT_TXD;
- adapter->rx_ring_count = IGB_DEFAULT_RXD;
- adapter->rx_itr_setting = IGB_DEFAULT_ITR;
- adapter->tx_itr_setting = IGB_DEFAULT_ITR;
-
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
- spin_lock_init(&adapter->stats64_lock);
-#ifdef CONFIG_PCI_IOV
- switch (hw->mac.type) {
- case e1000_82576:
- case e1000_i350:
- if (max_vfs > 7) {
- dev_warn(&pdev->dev,
- "Maximum of 7 VFs per PF, using max\n");
- adapter->vfs_allocated_count = 7;
- } else
- adapter->vfs_allocated_count = max_vfs;
- break;
- default:
- break;
- }
-#endif /* CONFIG_PCI_IOV */
- adapter->rss_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
- /* i350 cannot do RSS and SR-IOV at the same time */
- if (hw->mac.type == e1000_i350 && adapter->vfs_allocated_count)
- adapter->rss_queues = 1;
-
- /*
- * if rss_queues > 4 or vfs are going to be allocated with rss_queues
- * then we should combine the queues into a queue pair in order to
- * conserve interrupts due to limited supply
- */
- if ((adapter->rss_queues > 4) ||
- ((adapter->rss_queues > 1) && (adapter->vfs_allocated_count > 6)))
- adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
-
- /* This call may decrease the number of queues */
- if (igb_init_interrupt_scheme(adapter)) {
- dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
- igb_probe_vfs(adapter);
-
- /* Explicitly disable IRQ since the NIC can be in any state. */
- igb_irq_disable(adapter);
-
- if (hw->mac.type == e1000_i350)
- adapter->flags &= ~IGB_FLAG_DMAC;
-
- set_bit(__IGB_DOWN, &adapter->state);
- return 0;
-}
-
-/**
- * igb_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-static int igb_open(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int err;
- int i;
-
- /* disallow open during test */
- if (test_bit(__IGB_TESTING, &adapter->state))
- return -EBUSY;
-
- netif_carrier_off(netdev);
-
- /* allocate transmit descriptors */
- err = igb_setup_all_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = igb_setup_all_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- igb_power_up_link(adapter);
-
- /* before we allocate an interrupt, we must be ready to handle it.
- * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
- * as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so. */
- igb_configure(adapter);
-
- err = igb_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- /* From here on the code is the same as igb_up() */
- clear_bit(__IGB_DOWN, &adapter->state);
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- napi_enable(&q_vector->napi);
- }
-
- /* Clear any pending interrupts. */
- rd32(E1000_ICR);
-
- igb_irq_enable(adapter);
-
- /* notify VFs that reset has been completed */
- if (adapter->vfs_allocated_count) {
- u32 reg_data = rd32(E1000_CTRL_EXT);
- reg_data |= E1000_CTRL_EXT_PFRSTD;
- wr32(E1000_CTRL_EXT, reg_data);
- }
-
- netif_tx_start_all_queues(netdev);
-
- /* start the watchdog. */
- hw->mac.get_link_status = 1;
- schedule_work(&adapter->watchdog_task);
-
- return 0;
-
-err_req_irq:
- igb_release_hw_control(adapter);
- igb_power_down_link(adapter);
- igb_free_all_rx_resources(adapter);
-err_setup_rx:
- igb_free_all_tx_resources(adapter);
-err_setup_tx:
- igb_reset(adapter);
-
- return err;
-}
-
-/**
- * igb_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the driver's control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-static int igb_close(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- WARN_ON(test_bit(__IGB_RESETTING, &adapter->state));
- igb_down(adapter);
-
- igb_free_irq(adapter);
-
- igb_free_all_tx_resources(adapter);
- igb_free_all_rx_resources(adapter);
-
- return 0;
-}
-
-/**
- * igb_setup_tx_resources - allocate Tx resources (Descriptors)
- * @tx_ring: tx descriptor ring (for a specific queue) to setup
- *
- * Return 0 on success, negative on failure
- **/
-int igb_setup_tx_resources(struct igb_ring *tx_ring)
-{
- struct device *dev = tx_ring->dev;
- int size;
-
- size = sizeof(struct igb_buffer) * tx_ring->count;
- tx_ring->buffer_info = vzalloc(size);
- if (!tx_ring->buffer_info)
- goto err;
-
- /* round up to nearest 4K */
- tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
-
- tx_ring->desc = dma_alloc_coherent(dev,
- tx_ring->size,
- &tx_ring->dma,
- GFP_KERNEL);
-
- if (!tx_ring->desc)
- goto err;
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
- return 0;
-
-err:
- vfree(tx_ring->buffer_info);
- dev_err(dev,
- "Unable to allocate memory for the transmit descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * igb_setup_all_tx_resources - wrapper to allocate Tx resources
- * (Descriptors) for all queues
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int i, err = 0;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- err = igb_setup_tx_resources(adapter->tx_ring[i]);
- if (err) {
- dev_err(&pdev->dev,
- "Allocation for Tx Queue %u failed\n", i);
- for (i--; i >= 0; i--)
- igb_free_tx_resources(adapter->tx_ring[i]);
- break;
- }
- }
-
- for (i = 0; i < IGB_ABS_MAX_TX_QUEUES; i++) {
- int r_idx = i % adapter->num_tx_queues;
- adapter->multi_tx_table[i] = adapter->tx_ring[r_idx];
- }
- return err;
-}
-
-/**
- * igb_setup_tctl - configure the transmit control registers
- * @adapter: Board private structure
- **/
-void igb_setup_tctl(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 tctl;
-
- /* disable queue 0 which is enabled by default on 82575 and 82576 */
- wr32(E1000_TXDCTL(0), 0);
-
- /* Program the Transmit Control Register */
- tctl = rd32(E1000_TCTL);
- tctl &= ~E1000_TCTL_CT;
- tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
- (E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
- igb_config_collision_dist(hw);
-
- /* Enable transmits */
- tctl |= E1000_TCTL_EN;
-
- wr32(E1000_TCTL, tctl);
-}
-
-/**
- * igb_configure_tx_ring - Configure transmit ring after Reset
- * @adapter: board private structure
- * @ring: tx ring to configure
- *
- * Configure a transmit ring after a reset.
- **/
-void igb_configure_tx_ring(struct igb_adapter *adapter,
- struct igb_ring *ring)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 txdctl;
- u64 tdba = ring->dma;
- int reg_idx = ring->reg_idx;
-
- /* disable the queue */
- txdctl = rd32(E1000_TXDCTL(reg_idx));
- wr32(E1000_TXDCTL(reg_idx),
- txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
- wrfl();
- mdelay(10);
-
- wr32(E1000_TDLEN(reg_idx),
- ring->count * sizeof(union e1000_adv_tx_desc));
- wr32(E1000_TDBAL(reg_idx),
- tdba & 0x00000000ffffffffULL);
- wr32(E1000_TDBAH(reg_idx), tdba >> 32);
-
- ring->head = hw->hw_addr + E1000_TDH(reg_idx);
- ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
- writel(0, ring->head);
- writel(0, ring->tail);
-
- txdctl |= IGB_TX_PTHRESH;
- txdctl |= IGB_TX_HTHRESH << 8;
- txdctl |= IGB_TX_WTHRESH << 16;
-
- txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
- wr32(E1000_TXDCTL(reg_idx), txdctl);
-}
-
-/**
- * igb_configure_tx - Configure transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-static void igb_configure_tx(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- igb_configure_tx_ring(adapter, adapter->tx_ring[i]);
-}
-
-/**
- * igb_setup_rx_resources - allocate Rx resources (Descriptors)
- * @rx_ring: rx descriptor ring (for a specific queue) to setup
- *
- * Returns 0 on success, negative on failure
- **/
-int igb_setup_rx_resources(struct igb_ring *rx_ring)
-{
- struct device *dev = rx_ring->dev;
- int size, desc_len;
-
- size = sizeof(struct igb_buffer) * rx_ring->count;
- rx_ring->buffer_info = vzalloc(size);
- if (!rx_ring->buffer_info)
- goto err;
-
- desc_len = sizeof(union e1000_adv_rx_desc);
-
- /* Round up to nearest 4K */
- rx_ring->size = rx_ring->count * desc_len;
- rx_ring->size = ALIGN(rx_ring->size, 4096);
-
- rx_ring->desc = dma_alloc_coherent(dev,
- rx_ring->size,
- &rx_ring->dma,
- GFP_KERNEL);
-
- if (!rx_ring->desc)
- goto err;
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- return 0;
-
-err:
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
- dev_err(dev, "Unable to allocate memory for the receive descriptor"
- " ring\n");
- return -ENOMEM;
-}
-
-/**
- * igb_setup_all_rx_resources - wrapper to allocate Rx resources
- * (Descriptors) for all queues
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
- int i, err = 0;
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- err = igb_setup_rx_resources(adapter->rx_ring[i]);
- if (err) {
- dev_err(&pdev->dev,
- "Allocation for Rx Queue %u failed\n", i);
- for (i--; i >= 0; i--)
- igb_free_rx_resources(adapter->rx_ring[i]);
- break;
- }
- }
-
- return err;
-}
-
-/**
- * igb_setup_mrqc - configure the multiple receive queue control registers
- * @adapter: Board private structure
- **/
-static void igb_setup_mrqc(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 mrqc, rxcsum;
- u32 j, num_rx_queues, shift = 0, shift2 = 0;
- union e1000_reta {
- u32 dword;
- u8 bytes[4];
- } reta;
- static const u8 rsshash[40] = {
- 0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
- 0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
- 0xae, 0x7b, 0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
- 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
-
- /* Fill out hash function seeds */
- for (j = 0; j < 10; j++) {
- u32 rsskey = rsshash[(j * 4)];
- rsskey |= rsshash[(j * 4) + 1] << 8;
- rsskey |= rsshash[(j * 4) + 2] << 16;
- rsskey |= rsshash[(j * 4) + 3] << 24;
- array_wr32(E1000_RSSRK(0), j, rsskey);
- }
-
- num_rx_queues = adapter->rss_queues;
-
- if (adapter->vfs_allocated_count) {
- /* 82575 and 82576 supports 2 RSS queues for VMDq */
- switch (hw->mac.type) {
- case e1000_i350:
- case e1000_82580:
- num_rx_queues = 1;
- shift = 0;
- break;
- case e1000_82576:
- shift = 3;
- num_rx_queues = 2;
- break;
- case e1000_82575:
- shift = 2;
- shift2 = 6;
- default:
- break;
- }
- } else {
- if (hw->mac.type == e1000_82575)
- shift = 6;
- }
-
- for (j = 0; j < (32 * 4); j++) {
- reta.bytes[j & 3] = (j % num_rx_queues) << shift;
- if (shift2)
- reta.bytes[j & 3] |= num_rx_queues << shift2;
- if ((j & 3) == 3)
- wr32(E1000_RETA(j >> 2), reta.dword);
- }
-
- /*
- * Disable raw packet checksumming so that RSS hash is placed in
- * descriptor on writeback. No need to enable TCP/UDP/IP checksum
- * offloads as they are enabled by default
- */
- rxcsum = rd32(E1000_RXCSUM);
- rxcsum |= E1000_RXCSUM_PCSD;
-
- if (adapter->hw.mac.type >= e1000_82576)
- /* Enable Receive Checksum Offload for SCTP */
- rxcsum |= E1000_RXCSUM_CRCOFL;
-
- /* Don't need to set TUOFL or IPOFL, they default to 1 */
- wr32(E1000_RXCSUM, rxcsum);
-
- /* If VMDq is enabled then we set the appropriate mode for that, else
- * we default to RSS so that an RSS hash is calculated per packet even
- * if we are only using one queue */
- if (adapter->vfs_allocated_count) {
- if (hw->mac.type > e1000_82575) {
- /* Set the default pool for the PF's first queue */
- u32 vtctl = rd32(E1000_VT_CTL);
- vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
- E1000_VT_CTL_DISABLE_DEF_POOL);
- vtctl |= adapter->vfs_allocated_count <<
- E1000_VT_CTL_DEFAULT_POOL_SHIFT;
- wr32(E1000_VT_CTL, vtctl);
- }
- if (adapter->rss_queues > 1)
- mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
- else
- mrqc = E1000_MRQC_ENABLE_VMDQ;
- } else {
- mrqc = E1000_MRQC_ENABLE_RSS_4Q;
- }
- igb_vmm_control(adapter);
-
- /*
- * Generate RSS hash based on TCP port numbers and/or
- * IPv4/v6 src and dst addresses since UDP cannot be
- * hashed reliably due to IP fragmentation
- */
- mrqc |= E1000_MRQC_RSS_FIELD_IPV4 |
- E1000_MRQC_RSS_FIELD_IPV4_TCP |
- E1000_MRQC_RSS_FIELD_IPV6 |
- E1000_MRQC_RSS_FIELD_IPV6_TCP |
- E1000_MRQC_RSS_FIELD_IPV6_TCP_EX;
-
- wr32(E1000_MRQC, mrqc);
-}
-
-/**
- * igb_setup_rctl - configure the receive control registers
- * @adapter: Board private structure
- **/
-void igb_setup_rctl(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 rctl;
-
- rctl = rd32(E1000_RCTL);
-
- rctl &= ~(3 << E1000_RCTL_MO_SHIFT);
- rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
-
- rctl |= E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
- (hw->mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
-
- /*
- * enable stripping of CRC. It's unlikely this will break BMC
- * redirection as it did with e1000. Newer features require
- * that the HW strips the CRC.
- */
- rctl |= E1000_RCTL_SECRC;
-
- /* disable store bad packets and clear size bits. */
- rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
-
- /* enable LPE to prevent packets larger than max_frame_size */
- rctl |= E1000_RCTL_LPE;
-
- /* disable queue 0 to prevent tail write w/o re-config */
- wr32(E1000_RXDCTL(0), 0);
-
- /* Attention!!! For SR-IOV PF driver operations you must enable
- * queue drop for all VF and PF queues to prevent head of line blocking
- * if an un-trusted VF does not provide descriptors to hardware.
- */
- if (adapter->vfs_allocated_count) {
- /* set all queue drop enable bits */
- wr32(E1000_QDE, ALL_QUEUES);
- }
-
- wr32(E1000_RCTL, rctl);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
- int vfn)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vmolr;
-
- /* if it isn't the PF check to see if VFs are enabled and
- * increase the size to support vlan tags */
- if (vfn < adapter->vfs_allocated_count &&
- adapter->vf_data[vfn].vlans_enabled)
- size += VLAN_TAG_SIZE;
-
- vmolr = rd32(E1000_VMOLR(vfn));
- vmolr &= ~E1000_VMOLR_RLPML_MASK;
- vmolr |= size | E1000_VMOLR_LPE;
- wr32(E1000_VMOLR(vfn), vmolr);
-
- return 0;
-}
-
-/**
- * igb_rlpml_set - set maximum receive packet size
- * @adapter: board private structure
- *
- * Configure maximum receivable packet size.
- **/
-static void igb_rlpml_set(struct igb_adapter *adapter)
-{
- u32 max_frame_size;
- struct e1000_hw *hw = &adapter->hw;
- u16 pf_id = adapter->vfs_allocated_count;
-
- max_frame_size = adapter->max_frame_size + VLAN_TAG_SIZE;
-
- /* if vfs are enabled we set RLPML to the largest possible request
- * size and set the VMOLR RLPML to the size we need */
- if (pf_id) {
- igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
- max_frame_size = MAX_JUMBO_FRAME_SIZE;
- }
-
- wr32(E1000_RLPML, max_frame_size);
-}
-
-static inline void igb_set_vmolr(struct igb_adapter *adapter,
- int vfn, bool aupe)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vmolr;
-
- /*
- * This register exists only on 82576 and newer so if we are older then
- * we should exit and do nothing
- */
- if (hw->mac.type < e1000_82576)
- return;
-
- vmolr = rd32(E1000_VMOLR(vfn));
- vmolr |= E1000_VMOLR_STRVLAN; /* Strip vlan tags */
- if (aupe)
- vmolr |= E1000_VMOLR_AUPE; /* Accept untagged packets */
- else
- vmolr &= ~(E1000_VMOLR_AUPE); /* Tagged packets ONLY */
-
- /* clear all bits that might not be set */
- vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
-
- if (adapter->rss_queues > 1 && vfn == adapter->vfs_allocated_count)
- vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
- /*
- * for VMDq only allow the VFs and pool 0 to accept broadcast and
- * multicast packets
- */
- if (vfn <= adapter->vfs_allocated_count)
- vmolr |= E1000_VMOLR_BAM; /* Accept broadcast */
-
- wr32(E1000_VMOLR(vfn), vmolr);
-}
-
-/**
- * igb_configure_rx_ring - Configure a receive ring after Reset
- * @adapter: board private structure
- * @ring: receive ring to be configured
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-void igb_configure_rx_ring(struct igb_adapter *adapter,
- struct igb_ring *ring)
-{
- struct e1000_hw *hw = &adapter->hw;
- u64 rdba = ring->dma;
- int reg_idx = ring->reg_idx;
- u32 srrctl, rxdctl;
-
- /* disable the queue */
- rxdctl = rd32(E1000_RXDCTL(reg_idx));
- wr32(E1000_RXDCTL(reg_idx),
- rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
-
- /* Set DMA base address registers */
- wr32(E1000_RDBAL(reg_idx),
- rdba & 0x00000000ffffffffULL);
- wr32(E1000_RDBAH(reg_idx), rdba >> 32);
- wr32(E1000_RDLEN(reg_idx),
- ring->count * sizeof(union e1000_adv_rx_desc));
-
- /* initialize head and tail */
- ring->head = hw->hw_addr + E1000_RDH(reg_idx);
- ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
- writel(0, ring->head);
- writel(0, ring->tail);
-
- /* set descriptor configuration */
- if (ring->rx_buffer_len < IGB_RXBUFFER_1024) {
- srrctl = ALIGN(ring->rx_buffer_len, 64) <<
- E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
-#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
- srrctl |= IGB_RXBUFFER_16384 >>
- E1000_SRRCTL_BSIZEPKT_SHIFT;
-#else
- srrctl |= (PAGE_SIZE / 2) >>
- E1000_SRRCTL_BSIZEPKT_SHIFT;
-#endif
- srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
- } else {
- srrctl = ALIGN(ring->rx_buffer_len, 1024) >>
- E1000_SRRCTL_BSIZEPKT_SHIFT;
- srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
- }
- if (hw->mac.type == e1000_82580)
- srrctl |= E1000_SRRCTL_TIMESTAMP;
- /* Only set Drop Enable if we are supporting multiple queues */
- if (adapter->vfs_allocated_count || adapter->num_rx_queues > 1)
- srrctl |= E1000_SRRCTL_DROP_EN;
-
- wr32(E1000_SRRCTL(reg_idx), srrctl);
-
- /* set filtering for VMDQ pools */
- igb_set_vmolr(adapter, reg_idx & 0x7, true);
-
- /* enable receive descriptor fetching */
- rxdctl = rd32(E1000_RXDCTL(reg_idx));
- rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
- rxdctl &= 0xFFF00000;
- rxdctl |= IGB_RX_PTHRESH;
- rxdctl |= IGB_RX_HTHRESH << 8;
- rxdctl |= IGB_RX_WTHRESH << 16;
- wr32(E1000_RXDCTL(reg_idx), rxdctl);
-}
-
-/**
- * igb_configure_rx - Configure receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-static void igb_configure_rx(struct igb_adapter *adapter)
-{
- int i;
-
- /* set UTA to appropriate mode */
- igb_set_uta(adapter);
-
- /* set the correct pool for the PF default MAC address in entry 0 */
- igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
- adapter->vfs_allocated_count);
-
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
- for (i = 0; i < adapter->num_rx_queues; i++)
- igb_configure_rx_ring(adapter, adapter->rx_ring[i]);
-}
-
-/**
- * igb_free_tx_resources - Free Tx Resources per Queue
- * @tx_ring: Tx descriptor ring for a specific queue
- *
- * Free all transmit software resources
- **/
-void igb_free_tx_resources(struct igb_ring *tx_ring)
-{
- igb_clean_tx_ring(tx_ring);
-
- vfree(tx_ring->buffer_info);
- tx_ring->buffer_info = NULL;
-
- /* if not set, then don't free */
- if (!tx_ring->desc)
- return;
-
- dma_free_coherent(tx_ring->dev, tx_ring->size,
- tx_ring->desc, tx_ring->dma);
-
- tx_ring->desc = NULL;
-}
-
-/**
- * igb_free_all_tx_resources - Free Tx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-static void igb_free_all_tx_resources(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- igb_free_tx_resources(adapter->tx_ring[i]);
-}
-
-void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
- struct igb_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(tx_ring->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_TO_DEVICE);
- else
- dma_unmap_single(tx_ring->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
- buffer_info->length = 0;
- buffer_info->next_to_watch = 0;
- buffer_info->mapped_as_page = false;
-}
-
-/**
- * igb_clean_tx_ring - Free Tx Buffers
- * @tx_ring: ring to be cleaned
- **/
-static void igb_clean_tx_ring(struct igb_ring *tx_ring)
-{
- struct igb_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- if (!tx_ring->buffer_info)
- return;
- /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
- }
-
- size = sizeof(struct igb_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-}
-
-/**
- * igb_clean_all_tx_rings - Free Tx Buffers for all queues
- * @adapter: board private structure
- **/
-static void igb_clean_all_tx_rings(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- igb_clean_tx_ring(adapter->tx_ring[i]);
-}
-
-/**
- * igb_free_rx_resources - Free Rx Resources
- * @rx_ring: ring to clean the resources from
- *
- * Free all receive software resources
- **/
-void igb_free_rx_resources(struct igb_ring *rx_ring)
-{
- igb_clean_rx_ring(rx_ring);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- /* if not set, then don't free */
- if (!rx_ring->desc)
- return;
-
- dma_free_coherent(rx_ring->dev, rx_ring->size,
- rx_ring->desc, rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * igb_free_all_rx_resources - Free Rx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-static void igb_free_all_rx_resources(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- igb_free_rx_resources(adapter->rx_ring[i]);
-}
-
-/**
- * igb_clean_rx_ring - Free Rx Buffers per Queue
- * @rx_ring: ring to free buffers from
- **/
-static void igb_clean_rx_ring(struct igb_ring *rx_ring)
-{
- struct igb_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- if (!rx_ring->buffer_info)
- return;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- dma_unmap_single(rx_ring->dev,
- buffer_info->dma,
- rx_ring->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- if (buffer_info->page_dma) {
- dma_unmap_page(rx_ring->dev,
- buffer_info->page_dma,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- buffer_info->page_dma = 0;
- }
- if (buffer_info->page) {
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- buffer_info->page_offset = 0;
- }
- }
-
- size = sizeof(struct igb_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-}
-
-/**
- * igb_clean_all_rx_rings - Free Rx Buffers for all queues
- * @adapter: board private structure
- **/
-static void igb_clean_all_rx_rings(struct igb_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- igb_clean_rx_ring(adapter->rx_ring[i]);
-}
-
-/**
- * igb_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-static int igb_set_mac(struct net_device *netdev, void *p)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
-
- /* set the correct pool for the new PF MAC address in entry 0 */
- igb_rar_set_qsel(adapter, hw->mac.addr, 0,
- adapter->vfs_allocated_count);
-
- return 0;
-}
-
-/**
- * igb_write_mc_addr_list - write multicast addresses to MTA
- * @netdev: network interface device structure
- *
- * Writes multicast address list to the MTA hash table.
- * Returns: -ENOMEM on failure
- * 0 on no addresses written
- * X on writing X addresses to MTA
- **/
-static int igb_write_mc_addr_list(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u8 *mta_list;
- int i;
-
- if (netdev_mc_empty(netdev)) {
- /* nothing to program, so clear mc list */
- igb_update_mc_addr_list(hw, NULL, 0);
- igb_restore_vf_multicasts(adapter);
- return 0;
- }
-
- mta_list = kzalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
- if (!mta_list)
- return -ENOMEM;
-
- /* The shared function expects a packed array of only addresses. */
- i = 0;
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
-
- igb_update_mc_addr_list(hw, mta_list, i);
- kfree(mta_list);
-
- return netdev_mc_count(netdev);
-}
-
-/**
- * igb_write_uc_addr_list - write unicast addresses to RAR table
- * @netdev: network interface device structure
- *
- * Writes unicast address list to the RAR table.
- * Returns: -ENOMEM on failure/insufficient address space
- * 0 on no addresses written
- * X on writing X addresses to the RAR table
- **/
-static int igb_write_uc_addr_list(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- unsigned int vfn = adapter->vfs_allocated_count;
- unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
- int count = 0;
-
- /* return ENOMEM indicating insufficient memory for addresses */
- if (netdev_uc_count(netdev) > rar_entries)
- return -ENOMEM;
-
- if (!netdev_uc_empty(netdev) && rar_entries) {
- struct netdev_hw_addr *ha;
-
- netdev_for_each_uc_addr(ha, netdev) {
- if (!rar_entries)
- break;
- igb_rar_set_qsel(adapter, ha->addr,
- rar_entries--,
- vfn);
- count++;
- }
- }
- /* write the addresses in reverse order to avoid write combining */
- for (; rar_entries > 0 ; rar_entries--) {
- wr32(E1000_RAH(rar_entries), 0);
- wr32(E1000_RAL(rar_entries), 0);
- }
- wrfl();
-
- return count;
-}
-
-/**
- * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_rx_mode entry point is called whenever the unicast or multicast
- * address lists or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper unicast, multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-static void igb_set_rx_mode(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- unsigned int vfn = adapter->vfs_allocated_count;
- u32 rctl, vmolr = 0;
- int count;
-
- /* Check for Promiscuous and All Multicast modes */
- rctl = rd32(E1000_RCTL);
-
- /* clear the effected bits */
- rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
- vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
- } else {
- if (netdev->flags & IFF_ALLMULTI) {
- rctl |= E1000_RCTL_MPE;
- vmolr |= E1000_VMOLR_MPME;
- } else {
- /*
- * Write addresses to the MTA, if the attempt fails
- * then we should just turn on promiscuous mode so
- * that we can at least receive multicast traffic
- */
- count = igb_write_mc_addr_list(netdev);
- if (count < 0) {
- rctl |= E1000_RCTL_MPE;
- vmolr |= E1000_VMOLR_MPME;
- } else if (count) {
- vmolr |= E1000_VMOLR_ROMPE;
- }
- }
- /*
- * Write addresses to available RAR registers, if there is not
- * sufficient space to store all the addresses then enable
- * unicast promiscuous mode
- */
- count = igb_write_uc_addr_list(netdev);
- if (count < 0) {
- rctl |= E1000_RCTL_UPE;
- vmolr |= E1000_VMOLR_ROPE;
- }
- rctl |= E1000_RCTL_VFE;
- }
- wr32(E1000_RCTL, rctl);
-
- /*
- * In order to support SR-IOV and eventually VMDq it is necessary to set
- * the VMOLR to enable the appropriate modes. Without this workaround
- * we will have issues with VLAN tag stripping not being done for frames
- * that are only arriving because we are the default pool
- */
- if (hw->mac.type < e1000_82576)
- return;
-
- vmolr |= rd32(E1000_VMOLR(vfn)) &
- ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
- wr32(E1000_VMOLR(vfn), vmolr);
- igb_restore_vf_multicasts(adapter);
-}
-
-static void igb_check_wvbr(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 wvbr = 0;
-
- switch (hw->mac.type) {
- case e1000_82576:
- case e1000_i350:
- if (!(wvbr = rd32(E1000_WVBR)))
- return;
- break;
- default:
- break;
- }
-
- adapter->wvbr |= wvbr;
-}
-
-#define IGB_STAGGERED_QUEUE_OFFSET 8
-
-static void igb_spoof_check(struct igb_adapter *adapter)
-{
- int j;
-
- if (!adapter->wvbr)
- return;
-
- for(j = 0; j < adapter->vfs_allocated_count; j++) {
- if (adapter->wvbr & (1 << j) ||
- adapter->wvbr & (1 << (j + IGB_STAGGERED_QUEUE_OFFSET))) {
- dev_warn(&adapter->pdev->dev,
- "Spoof event(s) detected on VF %d\n", j);
- adapter->wvbr &=
- ~((1 << j) |
- (1 << (j + IGB_STAGGERED_QUEUE_OFFSET)));
- }
- }
-}
-
-/* Need to wait a few seconds after link up to get diagnostic information from
- * the phy */
-static void igb_update_phy_info(unsigned long data)
-{
- struct igb_adapter *adapter = (struct igb_adapter *) data;
- igb_get_phy_info(&adapter->hw);
-}
-
-/**
- * igb_has_link - check shared code for link and determine up/down
- * @adapter: pointer to driver private info
- **/
-bool igb_has_link(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- bool link_active = false;
- s32 ret_val = 0;
-
- /* get_link_status is set on LSC (link status) interrupt or
- * rx sequence error interrupt. get_link_status will stay
- * false until the e1000_check_for_link establishes link
- * for copper adapters ONLY
- */
- switch (hw->phy.media_type) {
- case e1000_media_type_copper:
- if (hw->mac.get_link_status) {
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !hw->mac.get_link_status;
- } else {
- link_active = true;
- }
- break;
- case e1000_media_type_internal_serdes:
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = hw->mac.serdes_has_link;
- break;
- default:
- case e1000_media_type_unknown:
- break;
- }
-
- return link_active;
-}
-
-static bool igb_thermal_sensor_event(struct e1000_hw *hw, u32 event)
-{
- bool ret = false;
- u32 ctrl_ext, thstat;
-
- /* check for thermal sensor event on i350, copper only */
- if (hw->mac.type == e1000_i350) {
- thstat = rd32(E1000_THSTAT);
- ctrl_ext = rd32(E1000_CTRL_EXT);
-
- if ((hw->phy.media_type == e1000_media_type_copper) &&
- !(ctrl_ext & E1000_CTRL_EXT_LINK_MODE_SGMII)) {
- ret = !!(thstat & event);
- }
- }
-
- return ret;
-}
-
-/**
- * igb_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void igb_watchdog(unsigned long data)
-{
- struct igb_adapter *adapter = (struct igb_adapter *)data;
- /* Do the rest outside of interrupt context */
- schedule_work(&adapter->watchdog_task);
-}
-
-static void igb_watchdog_task(struct work_struct *work)
-{
- struct igb_adapter *adapter = container_of(work,
- struct igb_adapter,
- watchdog_task);
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- u32 link;
- int i;
-
- link = igb_has_link(adapter);
- if (link) {
- if (!netif_carrier_ok(netdev)) {
- u32 ctrl;
- hw->mac.ops.get_speed_and_duplex(hw,
- &adapter->link_speed,
- &adapter->link_duplex);
-
- ctrl = rd32(E1000_CTRL);
- /* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
- "Flow Control: %s\n",
- netdev->name,
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex",
- ((ctrl & E1000_CTRL_TFCE) &&
- (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
- ((ctrl & E1000_CTRL_RFCE) ? "RX" :
- ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None")));
-
- /* check for thermal sensor event */
- if (igb_thermal_sensor_event(hw, E1000_THSTAT_LINK_THROTTLE)) {
- printk(KERN_INFO "igb: %s The network adapter "
- "link speed was downshifted "
- "because it overheated.\n",
- netdev->name);
- }
-
- /* adjust timeout factor according to speed/duplex */
- adapter->tx_timeout_factor = 1;
- switch (adapter->link_speed) {
- case SPEED_10:
- adapter->tx_timeout_factor = 14;
- break;
- case SPEED_100:
- /* maybe add some timeout factor ? */
- break;
- }
-
- netif_carrier_on(netdev);
-
- igb_ping_all_vfs(adapter);
- igb_check_vf_rate_limit(adapter);
-
- /* link state has changed, schedule phy info update */
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- /* check for thermal sensor event */
- if (igb_thermal_sensor_event(hw, E1000_THSTAT_PWR_DOWN)) {
- printk(KERN_ERR "igb: %s The network adapter "
- "was stopped because it "
- "overheated.\n",
- netdev->name);
- }
-
- /* Links status message must follow this format */
- printk(KERN_INFO "igb: %s NIC Link is Down\n",
- netdev->name);
- netif_carrier_off(netdev);
-
- igb_ping_all_vfs(adapter);
-
- /* link state has changed, schedule phy info update */
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->phy_info_timer,
- round_jiffies(jiffies + 2 * HZ));
- }
- }
-
- spin_lock(&adapter->stats64_lock);
- igb_update_stats(adapter, &adapter->stats64);
- spin_unlock(&adapter->stats64_lock);
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct igb_ring *tx_ring = adapter->tx_ring[i];
- if (!netif_carrier_ok(netdev)) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
- if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
- /* return immediately since reset is imminent */
- return;
- }
- }
-
- /* Force detection of hung controller every watchdog period */
- tx_ring->detect_tx_hung = true;
- }
-
- /* Cause software interrupt to ensure rx ring is cleaned */
- if (adapter->msix_entries) {
- u32 eics = 0;
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- eics |= q_vector->eims_value;
- }
- wr32(E1000_EICS, eics);
- } else {
- wr32(E1000_ICS, E1000_ICS_RXDMT0);
- }
-
- igb_spoof_check(adapter);
-
- /* Reset the timer */
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 2 * HZ));
-}
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-/**
- * igb_update_ring_itr - update the dynamic ITR value based on packet size
- *
- * Stores a new ITR value based on strictly on packet size. This
- * algorithm is less sophisticated than that used in igb_update_itr,
- * due to the difficulty of synchronizing statistics across multiple
- * receive rings. The divisors and thresholds used by this function
- * were determined based on theoretical maximum wire speed and testing
- * data, in order to minimize response time while increasing bulk
- * throughput.
- * This functionality is controlled by the InterruptThrottleRate module
- * parameter (see igb_param.c)
- * NOTE: This function is called only when operating in a multiqueue
- * receive environment.
- * @q_vector: pointer to q_vector
- **/
-static void igb_update_ring_itr(struct igb_q_vector *q_vector)
-{
- int new_val = q_vector->itr_val;
- int avg_wire_size = 0;
- struct igb_adapter *adapter = q_vector->adapter;
- struct igb_ring *ring;
- unsigned int packets;
-
- /* For non-gigabit speeds, just fix the interrupt rate at 4000
- * ints/sec - ITR timer value of 120 ticks.
- */
- if (adapter->link_speed != SPEED_1000) {
- new_val = 976;
- goto set_itr_val;
- }
-
- ring = q_vector->rx_ring;
- if (ring) {
- packets = ACCESS_ONCE(ring->total_packets);
-
- if (packets)
- avg_wire_size = ring->total_bytes / packets;
- }
-
- ring = q_vector->tx_ring;
- if (ring) {
- packets = ACCESS_ONCE(ring->total_packets);
-
- if (packets)
- avg_wire_size = max_t(u32, avg_wire_size,
- ring->total_bytes / packets);
- }
-
- /* if avg_wire_size isn't set no work was done */
- if (!avg_wire_size)
- goto clear_counts;
-
- /* Add 24 bytes to size to account for CRC, preamble, and gap */
- avg_wire_size += 24;
-
- /* Don't starve jumbo frames */
- avg_wire_size = min(avg_wire_size, 3000);
-
- /* Give a little boost to mid-size frames */
- if ((avg_wire_size > 300) && (avg_wire_size < 1200))
- new_val = avg_wire_size / 3;
- else
- new_val = avg_wire_size / 2;
-
- /* when in itr mode 3 do not exceed 20K ints/sec */
- if (adapter->rx_itr_setting == 3 && new_val < 196)
- new_val = 196;
-
-set_itr_val:
- if (new_val != q_vector->itr_val) {
- q_vector->itr_val = new_val;
- q_vector->set_itr = 1;
- }
-clear_counts:
- if (q_vector->rx_ring) {
- q_vector->rx_ring->total_bytes = 0;
- q_vector->rx_ring->total_packets = 0;
- }
- if (q_vector->tx_ring) {
- q_vector->tx_ring->total_bytes = 0;
- q_vector->tx_ring->total_packets = 0;
- }
-}
-
-/**
- * igb_update_itr - update the dynamic ITR value based on statistics
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- * this functionality is controlled by the InterruptThrottleRate module
- * parameter (see igb_param.c)
- * NOTE: These calculations are only valid when operating in a single-
- * queue environment.
- * @adapter: pointer to adapter
- * @itr_setting: current q_vector->itr_val
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
- **/
-static unsigned int igb_update_itr(struct igb_adapter *adapter, u16 itr_setting,
- int packets, int bytes)
-{
- unsigned int retval = itr_setting;
-
- if (packets == 0)
- goto update_itr_done;
-
- switch (itr_setting) {
- case lowest_latency:
- /* handle TSO and jumbo frames */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512))
- retval = low_latency;
- break;
- case low_latency: /* 50 usec aka 20000 ints/s */
- if (bytes > 10000) {
- /* this if handles the TSO accounting */
- if (bytes/packets > 8000) {
- retval = bulk_latency;
- } else if ((packets < 10) || ((bytes/packets) > 1200)) {
- retval = bulk_latency;
- } else if ((packets > 35)) {
- retval = lowest_latency;
- }
- } else if (bytes/packets > 2000) {
- retval = bulk_latency;
- } else if (packets <= 2 && bytes < 512) {
- retval = lowest_latency;
- }
- break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
- if (bytes > 25000) {
- if (packets > 35)
- retval = low_latency;
- } else if (bytes < 1500) {
- retval = low_latency;
- }
- break;
- }
-
-update_itr_done:
- return retval;
-}
-
-static void igb_set_itr(struct igb_adapter *adapter)
-{
- struct igb_q_vector *q_vector = adapter->q_vector[0];
- u16 current_itr;
- u32 new_itr = q_vector->itr_val;
-
- /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
- if (adapter->link_speed != SPEED_1000) {
- current_itr = 0;
- new_itr = 4000;
- goto set_itr_now;
- }
-
- adapter->rx_itr = igb_update_itr(adapter,
- adapter->rx_itr,
- q_vector->rx_ring->total_packets,
- q_vector->rx_ring->total_bytes);
-
- adapter->tx_itr = igb_update_itr(adapter,
- adapter->tx_itr,
- q_vector->tx_ring->total_packets,
- q_vector->tx_ring->total_bytes);
- current_itr = max(adapter->rx_itr, adapter->tx_itr);
-
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
- current_itr = low_latency;
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 56; /* aka 70,000 ints/sec */
- break;
- case low_latency:
- new_itr = 196; /* aka 20,000 ints/sec */
- break;
- case bulk_latency:
- new_itr = 980; /* aka 4,000 ints/sec */
- break;
- default:
- break;
- }
-
-set_itr_now:
- q_vector->rx_ring->total_bytes = 0;
- q_vector->rx_ring->total_packets = 0;
- q_vector->tx_ring->total_bytes = 0;
- q_vector->tx_ring->total_packets = 0;
-
- if (new_itr != q_vector->itr_val) {
- /* this attempts to bias the interrupt rate towards Bulk
- * by adding intermediate steps when interrupt rate is
- * increasing */
- new_itr = new_itr > q_vector->itr_val ?
- max((new_itr * q_vector->itr_val) /
- (new_itr + (q_vector->itr_val >> 2)),
- new_itr) :
- new_itr;
- /* Don't write the value here; it resets the adapter's
- * internal timer, and causes us to delay far longer than
- * we should between interrupts. Instead, we write the ITR
- * value at the beginning of the next interrupt so the timing
- * ends up being correct.
- */
- q_vector->itr_val = new_itr;
- q_vector->set_itr = 1;
- }
-}
-
-#define IGB_TX_FLAGS_CSUM 0x00000001
-#define IGB_TX_FLAGS_VLAN 0x00000002
-#define IGB_TX_FLAGS_TSO 0x00000004
-#define IGB_TX_FLAGS_IPV4 0x00000008
-#define IGB_TX_FLAGS_TSTAMP 0x00000010
-#define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IGB_TX_FLAGS_VLAN_SHIFT 16
-
-static inline int igb_tso_adv(struct igb_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
-{
- struct e1000_adv_tx_context_desc *context_desc;
- unsigned int i;
- int err;
- struct igb_buffer *buffer_info;
- u32 info = 0, tu_cmd = 0;
- u32 mss_l4len_idx;
- u8 l4len;
-
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err)
- return err;
- }
-
- l4len = tcp_hdrlen(skb);
- *hdr_len += l4len;
-
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
- } else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- }
-
- i = tx_ring->next_to_use;
-
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
- /* VLAN MACLEN IPLEN */
- if (tx_flags & IGB_TX_FLAGS_VLAN)
- info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
- info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
- *hdr_len += skb_network_offset(skb);
- info |= skb_network_header_len(skb);
- *hdr_len += skb_network_header_len(skb);
- context_desc->vlan_macip_lens = cpu_to_le32(info);
-
- /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
- tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
-
- if (skb->protocol == htons(ETH_P_IP))
- tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
-
- context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
-
- /* MSS L4LEN IDX */
- mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
- mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
-
- /* For 82575, context index must be unique per ring. */
- if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
- mss_l4len_idx |= tx_ring->reg_idx << 4;
-
- context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
- context_desc->seqnum_seed = 0;
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = 0;
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- tx_ring->next_to_use = i;
-
- return true;
-}
-
-static inline bool igb_tx_csum_adv(struct igb_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags)
-{
- struct e1000_adv_tx_context_desc *context_desc;
- struct device *dev = tx_ring->dev;
- struct igb_buffer *buffer_info;
- u32 info = 0, tu_cmd = 0;
- unsigned int i;
-
- if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
- (tx_flags & IGB_TX_FLAGS_VLAN)) {
- i = tx_ring->next_to_use;
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = E1000_TX_CTXTDESC_ADV(*tx_ring, i);
-
- if (tx_flags & IGB_TX_FLAGS_VLAN)
- info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
-
- info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- info |= skb_network_header_len(skb);
-
- context_desc->vlan_macip_lens = cpu_to_le32(info);
-
- tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
-
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- __be16 protocol;
-
- if (skb->protocol == cpu_to_be16(ETH_P_8021Q)) {
- const struct vlan_ethhdr *vhdr =
- (const struct vlan_ethhdr*)skb->data;
-
- protocol = vhdr->h_vlan_encapsulated_proto;
- } else {
- protocol = skb->protocol;
- }
-
- switch (protocol) {
- case cpu_to_be16(ETH_P_IP):
- tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
- else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
- break;
- case cpu_to_be16(ETH_P_IPV6):
- /* XXX what about other V6 headers?? */
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
- else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_SCTP;
- break;
- default:
- if (unlikely(net_ratelimit()))
- dev_warn(dev,
- "partial checksum but proto=%x!\n",
- skb->protocol);
- break;
- }
- }
-
- context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
- context_desc->seqnum_seed = 0;
- if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
- context_desc->mss_l4len_idx =
- cpu_to_le32(tx_ring->reg_idx << 4);
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = 0;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return true;
- }
- return false;
-}
-
-#define IGB_MAX_TXD_PWR 16
-#define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
-
-static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
- unsigned int first)
-{
- struct igb_buffer *buffer_info;
- struct device *dev = tx_ring->dev;
- unsigned int hlen = skb_headlen(skb);
- unsigned int count = 0, i;
- unsigned int f;
- u16 gso_segs = skb_shinfo(skb)->gso_segs ?: 1;
-
- i = tx_ring->next_to_use;
-
- buffer_info = &tx_ring->buffer_info[i];
- BUG_ON(hlen >= IGB_MAX_DATA_PER_TXD);
- buffer_info->length = hlen;
- /* set time_stamp *before* dma to help avoid a possible race */
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = dma_map_single(dev, skb->data, hlen,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, buffer_info->dma))
- goto dma_error;
-
- for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
- struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[f];
- unsigned int len = frag->size;
-
- count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- buffer_info = &tx_ring->buffer_info[i];
- BUG_ON(len >= IGB_MAX_DATA_PER_TXD);
- buffer_info->length = len;
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->mapped_as_page = true;
- buffer_info->dma = dma_map_page(dev,
- frag->page,
- frag->page_offset,
- len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(dev, buffer_info->dma))
- goto dma_error;
-
- }
-
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[i].tx_flags = skb_shinfo(skb)->tx_flags;
- /* multiply data chunks by size of headers */
- tx_ring->buffer_info[i].bytecount = ((gso_segs - 1) * hlen) + skb->len;
- tx_ring->buffer_info[i].gso_segs = gso_segs;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return ++count;
-
-dma_error:
- dev_err(dev, "TX DMA map failed\n");
-
- /* clear timestamp and dma mappings for failed buffer_info mapping */
- buffer_info->dma = 0;
- buffer_info->time_stamp = 0;
- buffer_info->length = 0;
- buffer_info->next_to_watch = 0;
- buffer_info->mapped_as_page = false;
-
- /* clear timestamp and dma mappings for remaining portion of packet */
- while (count--) {
- if (i == 0)
- i = tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
- }
-
- return 0;
-}
-
-static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
- u32 tx_flags, int count, u32 paylen,
- u8 hdr_len)
-{
- union e1000_adv_tx_desc *tx_desc;
- struct igb_buffer *buffer_info;
- u32 olinfo_status = 0, cmd_type_len;
- unsigned int i = tx_ring->next_to_use;
-
- cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
- E1000_ADVTXD_DCMD_DEXT);
-
- if (tx_flags & IGB_TX_FLAGS_VLAN)
- cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
-
- if (tx_flags & IGB_TX_FLAGS_TSTAMP)
- cmd_type_len |= E1000_ADVTXD_MAC_TSTAMP;
-
- if (tx_flags & IGB_TX_FLAGS_TSO) {
- cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
-
- /* insert tcp checksum */
- olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
-
- /* insert ip checksum */
- if (tx_flags & IGB_TX_FLAGS_IPV4)
- olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
-
- } else if (tx_flags & IGB_TX_FLAGS_CSUM) {
- olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
- }
-
- if ((tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX) &&
- (tx_flags & (IGB_TX_FLAGS_CSUM |
- IGB_TX_FLAGS_TSO |
- IGB_TX_FLAGS_VLAN)))
- olinfo_status |= tx_ring->reg_idx << 4;
-
- olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
-
- do {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
- tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->read.cmd_type_len =
- cpu_to_le32(cmd_type_len | buffer_info->length);
- tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
- count--;
- i++;
- if (i == tx_ring->count)
- i = 0;
- } while (count > 0);
-
- tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, tx_ring->tail);
- /* we need this if more than one processor can write to our tail
- * at a time, it syncronizes IO on IA64/Altix systems */
- mmiowb();
-}
-
-static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
-{
- struct net_device *netdev = tx_ring->netdev;
-
- netif_stop_subqueue(netdev, tx_ring->queue_index);
-
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (igb_desc_unused(tx_ring) < size)
- return -EBUSY;
-
- /* A reprieve! */
- netif_wake_subqueue(netdev, tx_ring->queue_index);
-
- u64_stats_update_begin(&tx_ring->tx_syncp2);
- tx_ring->tx_stats.restart_queue2++;
- u64_stats_update_end(&tx_ring->tx_syncp2);
-
- return 0;
-}
-
-static inline int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
-{
- if (igb_desc_unused(tx_ring) >= size)
- return 0;
- return __igb_maybe_stop_tx(tx_ring, size);
-}
-
-netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
- struct igb_ring *tx_ring)
-{
- int tso = 0, count;
- u32 tx_flags = 0;
- u16 first;
- u8 hdr_len = 0;
-
- /* need: 1 descriptor per page,
- * + 2 desc gap to keep tail from touching head,
- * + 1 desc for skb->data,
- * + 1 desc for context descriptor,
- * otherwise try next time */
- if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
- /* this is a hard error */
- return NETDEV_TX_BUSY;
- }
-
- if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
- skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
- tx_flags |= IGB_TX_FLAGS_TSTAMP;
- }
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= IGB_TX_FLAGS_VLAN;
- tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
- }
-
- if (skb->protocol == htons(ETH_P_IP))
- tx_flags |= IGB_TX_FLAGS_IPV4;
-
- first = tx_ring->next_to_use;
- if (skb_is_gso(skb)) {
- tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
-
- if (tso < 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
- }
-
- if (tso)
- tx_flags |= IGB_TX_FLAGS_TSO;
- else if (igb_tx_csum_adv(tx_ring, skb, tx_flags) &&
- (skb->ip_summed == CHECKSUM_PARTIAL))
- tx_flags |= IGB_TX_FLAGS_CSUM;
-
- /*
- * count reflects descriptors mapped, if 0 or less then mapping error
- * has occurred and we need to rewind the descriptor queue
- */
- count = igb_tx_map_adv(tx_ring, skb, first);
- if (!count) {
- dev_kfree_skb_any(skb);
- tx_ring->buffer_info[first].time_stamp = 0;
- tx_ring->next_to_use = first;
- return NETDEV_TX_OK;
- }
-
- igb_tx_queue_adv(tx_ring, tx_flags, count, skb->len, hdr_len);
-
- /* Make sure there is space in the ring for the next send. */
- igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
-
- return NETDEV_TX_OK;
-}
-
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct igb_ring *tx_ring;
- int r_idx = 0;
-
- if (test_bit(__IGB_DOWN, &adapter->state)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->len <= 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- r_idx = skb->queue_mapping & (IGB_ABS_MAX_TX_QUEUES - 1);
- tx_ring = adapter->multi_tx_table[r_idx];
-
- /* This goes back to the question of how to logically map a tx queue
- * to a flow. Right now, performance is impacted slightly negatively
- * if using multiple tx queues. If the stack breaks away from a
- * single qdisc implementation, we can look at this again. */
- return igb_xmit_frame_ring_adv(skb, tx_ring);
-}
-
-/**
- * igb_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-static void igb_tx_timeout(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- /* Do the reset outside of interrupt context */
- adapter->tx_timeout_count++;
-
- if (hw->mac.type == e1000_82580)
- hw->dev_spec._82575.global_device_reset = true;
-
- schedule_work(&adapter->reset_task);
- wr32(E1000_EICS,
- (adapter->eims_enable_mask & ~adapter->eims_other));
-}
-
-static void igb_reset_task(struct work_struct *work)
-{
- struct igb_adapter *adapter;
- adapter = container_of(work, struct igb_adapter, reset_task);
-
- igb_dump(adapter);
- netdev_err(adapter->netdev, "Reset adapter\n");
- igb_reinit_locked(adapter);
-}
-
-/**
- * igb_get_stats64 - Get System Network Statistics
- * @netdev: network interface device structure
- * @stats: rtnl_link_stats64 pointer
- *
- **/
-static struct rtnl_link_stats64 *igb_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *stats)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- spin_lock(&adapter->stats64_lock);
- igb_update_stats(adapter, &adapter->stats64);
- memcpy(stats, &adapter->stats64, sizeof(*stats));
- spin_unlock(&adapter->stats64_lock);
-
- return stats;
-}
-
-/**
- * igb_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-static int igb_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct pci_dev *pdev = adapter->pdev;
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
- u32 rx_buffer_len, i;
-
- if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- dev_err(&pdev->dev, "Invalid MTU setting\n");
- return -EINVAL;
- }
-
- if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
- return -EINVAL;
- }
-
- while (test_and_set_bit(__IGB_RESETTING, &adapter->state))
- msleep(1);
-
- /* igb_down has a dependency on max_frame_size */
- adapter->max_frame_size = max_frame;
-
- /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- */
-
- if (adapter->hw.mac.type == e1000_82580)
- max_frame += IGB_TS_HDR_LEN;
-
- if (max_frame <= IGB_RXBUFFER_1024)
- rx_buffer_len = IGB_RXBUFFER_1024;
- else if (max_frame <= MAXIMUM_ETHERNET_VLAN_SIZE)
- rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- else
- rx_buffer_len = IGB_RXBUFFER_128;
-
- if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN + IGB_TS_HDR_LEN) ||
- (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN))
- rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE + IGB_TS_HDR_LEN;
-
- if ((adapter->hw.mac.type == e1000_82580) &&
- (rx_buffer_len == IGB_RXBUFFER_128))
- rx_buffer_len += IGB_RXBUFFER_64;
-
- if (netif_running(netdev))
- igb_down(adapter);
-
- dev_info(&pdev->dev, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->rx_buffer_len = rx_buffer_len;
-
- if (netif_running(netdev))
- igb_up(adapter);
- else
- igb_reset(adapter);
-
- clear_bit(__IGB_RESETTING, &adapter->state);
-
- return 0;
-}
-
-/**
- * igb_update_stats - Update the board statistics counters
- * @adapter: board private structure
- **/
-
-void igb_update_stats(struct igb_adapter *adapter,
- struct rtnl_link_stats64 *net_stats)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- u32 reg, mpc;
- u16 phy_tmp;
- int i;
- u64 bytes, packets;
- unsigned int start;
- u64 _bytes, _packets;
-
-#define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
-
- /*
- * Prevent stats update while adapter is being reset, or if the pci
- * connection is down.
- */
- if (adapter->link_speed == 0)
- return;
- if (pci_channel_offline(pdev))
- return;
-
- bytes = 0;
- packets = 0;
- for (i = 0; i < adapter->num_rx_queues; i++) {
- u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
- struct igb_ring *ring = adapter->rx_ring[i];
-
- ring->rx_stats.drops += rqdpc_tmp;
- net_stats->rx_fifo_errors += rqdpc_tmp;
-
- do {
- start = u64_stats_fetch_begin_bh(&ring->rx_syncp);
- _bytes = ring->rx_stats.bytes;
- _packets = ring->rx_stats.packets;
- } while (u64_stats_fetch_retry_bh(&ring->rx_syncp, start));
- bytes += _bytes;
- packets += _packets;
- }
-
- net_stats->rx_bytes = bytes;
- net_stats->rx_packets = packets;
-
- bytes = 0;
- packets = 0;
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct igb_ring *ring = adapter->tx_ring[i];
- do {
- start = u64_stats_fetch_begin_bh(&ring->tx_syncp);
- _bytes = ring->tx_stats.bytes;
- _packets = ring->tx_stats.packets;
- } while (u64_stats_fetch_retry_bh(&ring->tx_syncp, start));
- bytes += _bytes;
- packets += _packets;
- }
- net_stats->tx_bytes = bytes;
- net_stats->tx_packets = packets;
-
- /* read stats registers */
- adapter->stats.crcerrs += rd32(E1000_CRCERRS);
- adapter->stats.gprc += rd32(E1000_GPRC);
- adapter->stats.gorc += rd32(E1000_GORCL);
- rd32(E1000_GORCH); /* clear GORCL */
- adapter->stats.bprc += rd32(E1000_BPRC);
- adapter->stats.mprc += rd32(E1000_MPRC);
- adapter->stats.roc += rd32(E1000_ROC);
-
- adapter->stats.prc64 += rd32(E1000_PRC64);
- adapter->stats.prc127 += rd32(E1000_PRC127);
- adapter->stats.prc255 += rd32(E1000_PRC255);
- adapter->stats.prc511 += rd32(E1000_PRC511);
- adapter->stats.prc1023 += rd32(E1000_PRC1023);
- adapter->stats.prc1522 += rd32(E1000_PRC1522);
- adapter->stats.symerrs += rd32(E1000_SYMERRS);
- adapter->stats.sec += rd32(E1000_SEC);
-
- mpc = rd32(E1000_MPC);
- adapter->stats.mpc += mpc;
- net_stats->rx_fifo_errors += mpc;
- adapter->stats.scc += rd32(E1000_SCC);
- adapter->stats.ecol += rd32(E1000_ECOL);
- adapter->stats.mcc += rd32(E1000_MCC);
- adapter->stats.latecol += rd32(E1000_LATECOL);
- adapter->stats.dc += rd32(E1000_DC);
- adapter->stats.rlec += rd32(E1000_RLEC);
- adapter->stats.xonrxc += rd32(E1000_XONRXC);
- adapter->stats.xontxc += rd32(E1000_XONTXC);
- adapter->stats.xoffrxc += rd32(E1000_XOFFRXC);
- adapter->stats.xofftxc += rd32(E1000_XOFFTXC);
- adapter->stats.fcruc += rd32(E1000_FCRUC);
- adapter->stats.gptc += rd32(E1000_GPTC);
- adapter->stats.gotc += rd32(E1000_GOTCL);
- rd32(E1000_GOTCH); /* clear GOTCL */
- adapter->stats.rnbc += rd32(E1000_RNBC);
- adapter->stats.ruc += rd32(E1000_RUC);
- adapter->stats.rfc += rd32(E1000_RFC);
- adapter->stats.rjc += rd32(E1000_RJC);
- adapter->stats.tor += rd32(E1000_TORH);
- adapter->stats.tot += rd32(E1000_TOTH);
- adapter->stats.tpr += rd32(E1000_TPR);
-
- adapter->stats.ptc64 += rd32(E1000_PTC64);
- adapter->stats.ptc127 += rd32(E1000_PTC127);
- adapter->stats.ptc255 += rd32(E1000_PTC255);
- adapter->stats.ptc511 += rd32(E1000_PTC511);
- adapter->stats.ptc1023 += rd32(E1000_PTC1023);
- adapter->stats.ptc1522 += rd32(E1000_PTC1522);
-
- adapter->stats.mptc += rd32(E1000_MPTC);
- adapter->stats.bptc += rd32(E1000_BPTC);
-
- adapter->stats.tpt += rd32(E1000_TPT);
- adapter->stats.colc += rd32(E1000_COLC);
-
- adapter->stats.algnerrc += rd32(E1000_ALGNERRC);
- /* read internal phy specific stats */
- reg = rd32(E1000_CTRL_EXT);
- if (!(reg & E1000_CTRL_EXT_LINK_MODE_MASK)) {
- adapter->stats.rxerrc += rd32(E1000_RXERRC);
- adapter->stats.tncrs += rd32(E1000_TNCRS);
- }
-
- adapter->stats.tsctc += rd32(E1000_TSCTC);
- adapter->stats.tsctfc += rd32(E1000_TSCTFC);
-
- adapter->stats.iac += rd32(E1000_IAC);
- adapter->stats.icrxoc += rd32(E1000_ICRXOC);
- adapter->stats.icrxptc += rd32(E1000_ICRXPTC);
- adapter->stats.icrxatc += rd32(E1000_ICRXATC);
- adapter->stats.ictxptc += rd32(E1000_ICTXPTC);
- adapter->stats.ictxatc += rd32(E1000_ICTXATC);
- adapter->stats.ictxqec += rd32(E1000_ICTXQEC);
- adapter->stats.ictxqmtc += rd32(E1000_ICTXQMTC);
- adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
-
- /* Fill out the OS statistics structure */
- net_stats->multicast = adapter->stats.mprc;
- net_stats->collisions = adapter->stats.colc;
-
- /* Rx Errors */
-
- /* RLEC on some newer hardware can be incorrect so build
- * our own version based on RUC and ROC */
- net_stats->rx_errors = adapter->stats.rxerrc +
- adapter->stats.crcerrs + adapter->stats.algnerrc +
- adapter->stats.ruc + adapter->stats.roc +
- adapter->stats.cexterr;
- net_stats->rx_length_errors = adapter->stats.ruc +
- adapter->stats.roc;
- net_stats->rx_crc_errors = adapter->stats.crcerrs;
- net_stats->rx_frame_errors = adapter->stats.algnerrc;
- net_stats->rx_missed_errors = adapter->stats.mpc;
-
- /* Tx Errors */
- net_stats->tx_errors = adapter->stats.ecol +
- adapter->stats.latecol;
- net_stats->tx_aborted_errors = adapter->stats.ecol;
- net_stats->tx_window_errors = adapter->stats.latecol;
- net_stats->tx_carrier_errors = adapter->stats.tncrs;
-
- /* Tx Dropped needs to be maintained elsewhere */
-
- /* Phy Stats */
- if (hw->phy.media_type == e1000_media_type_copper) {
- if ((adapter->link_speed == SPEED_1000) &&
- (!igb_read_phy_reg(hw, PHY_1000T_STATUS, &phy_tmp))) {
- phy_tmp &= PHY_IDLE_ERROR_COUNT_MASK;
- adapter->phy_stats.idle_errors += phy_tmp;
- }
- }
-
- /* Management Stats */
- adapter->stats.mgptc += rd32(E1000_MGTPTC);
- adapter->stats.mgprc += rd32(E1000_MGTPRC);
- adapter->stats.mgpdc += rd32(E1000_MGTPDC);
-
- /* OS2BMC Stats */
- reg = rd32(E1000_MANC);
- if (reg & E1000_MANC_EN_BMC2OS) {
- adapter->stats.o2bgptc += rd32(E1000_O2BGPTC);
- adapter->stats.o2bspc += rd32(E1000_O2BSPC);
- adapter->stats.b2ospc += rd32(E1000_B2OSPC);
- adapter->stats.b2ogprc += rd32(E1000_B2OGPRC);
- }
-}
-
-static irqreturn_t igb_msix_other(int irq, void *data)
-{
- struct igb_adapter *adapter = data;
- struct e1000_hw *hw = &adapter->hw;
- u32 icr = rd32(E1000_ICR);
- /* reading ICR causes bit 31 of EICR to be cleared */
-
- if (icr & E1000_ICR_DRSTA)
- schedule_work(&adapter->reset_task);
-
- if (icr & E1000_ICR_DOUTSYNC) {
- /* HW is reporting DMA is out of sync */
- adapter->stats.doosync++;
- /* The DMA Out of Sync is also indication of a spoof event
- * in IOV mode. Check the Wrong VM Behavior register to
- * see if it is really a spoof event. */
- igb_check_wvbr(adapter);
- }
-
- /* Check for a mailbox event */
- if (icr & E1000_ICR_VMMB)
- igb_msg_task(adapter);
-
- if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
- /* guard against interrupt when we're going down */
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- if (adapter->vfs_allocated_count)
- wr32(E1000_IMS, E1000_IMS_LSC |
- E1000_IMS_VMMB |
- E1000_IMS_DOUTSYNC);
- else
- wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
- wr32(E1000_EIMS, adapter->eims_other);
-
- return IRQ_HANDLED;
-}
-
-static void igb_write_itr(struct igb_q_vector *q_vector)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- u32 itr_val = q_vector->itr_val & 0x7FFC;
-
- if (!q_vector->set_itr)
- return;
-
- if (!itr_val)
- itr_val = 0x4;
-
- if (adapter->hw.mac.type == e1000_82575)
- itr_val |= itr_val << 16;
- else
- itr_val |= 0x8000000;
-
- writel(itr_val, q_vector->itr_register);
- q_vector->set_itr = 0;
-}
-
-static irqreturn_t igb_msix_ring(int irq, void *data)
-{
- struct igb_q_vector *q_vector = data;
-
- /* Write the ITR value calculated from the previous interrupt. */
- igb_write_itr(q_vector);
-
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_IGB_DCA
-static void igb_update_dca(struct igb_q_vector *q_vector)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- int cpu = get_cpu();
-
- if (q_vector->cpu == cpu)
- goto out_no_update;
-
- if (q_vector->tx_ring) {
- int q = q_vector->tx_ring->reg_idx;
- u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
- if (hw->mac.type == e1000_82575) {
- dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
- dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- } else {
- dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
- dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
- E1000_DCA_TXCTRL_CPUID_SHIFT;
- }
- dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
- wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
- }
- if (q_vector->rx_ring) {
- int q = q_vector->rx_ring->reg_idx;
- u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
- if (hw->mac.type == e1000_82575) {
- dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
- dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- } else {
- dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
- dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
- E1000_DCA_RXCTRL_CPUID_SHIFT;
- }
- dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
- dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
- dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
- wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
- }
- q_vector->cpu = cpu;
-out_no_update:
- put_cpu();
-}
-
-static void igb_setup_dca(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- int i;
-
- if (!(adapter->flags & IGB_FLAG_DCA_ENABLED))
- return;
-
- /* Always use CB2 mode, difference is masked in the CB driver. */
- wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- adapter->q_vector[i]->cpu = -1;
- igb_update_dca(adapter->q_vector[i]);
- }
-}
-
-static int __igb_notify_dca(struct device *dev, void *data)
-{
- struct net_device *netdev = dev_get_drvdata(dev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_hw *hw = &adapter->hw;
- unsigned long event = *(unsigned long *)data;
-
- switch (event) {
- case DCA_PROVIDER_ADD:
- /* if already enabled, don't do it again */
- if (adapter->flags & IGB_FLAG_DCA_ENABLED)
- break;
- if (dca_add_requester(dev) == 0) {
- adapter->flags |= IGB_FLAG_DCA_ENABLED;
- dev_info(&pdev->dev, "DCA enabled\n");
- igb_setup_dca(adapter);
- break;
- }
- /* Fall Through since DCA is disabled. */
- case DCA_PROVIDER_REMOVE:
- if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
- /* without this a class_device is left
- * hanging around in the sysfs model */
- dca_remove_requester(dev);
- dev_info(&pdev->dev, "DCA disabled\n");
- adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
- wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
- }
- break;
- }
-
- return 0;
-}
-
-static int igb_notify_dca(struct notifier_block *nb, unsigned long event,
- void *p)
-{
- int ret_val;
-
- ret_val = driver_for_each_device(&igb_driver.driver, NULL, &event,
- __igb_notify_dca);
-
- return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
-}
-#endif /* CONFIG_IGB_DCA */
-
-static void igb_ping_all_vfs(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ping;
- int i;
-
- for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
- ping = E1000_PF_CONTROL_MSG;
- if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
- ping |= E1000_VT_MSGTYPE_CTS;
- igb_write_mbx(hw, &ping, 1, i);
- }
-}
-
-static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vmolr = rd32(E1000_VMOLR(vf));
- struct vf_data_storage *vf_data = &adapter->vf_data[vf];
-
- vf_data->flags &= ~(IGB_VF_FLAG_UNI_PROMISC |
- IGB_VF_FLAG_MULTI_PROMISC);
- vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
-
- if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
- vmolr |= E1000_VMOLR_MPME;
- vf_data->flags |= IGB_VF_FLAG_MULTI_PROMISC;
- *msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
- } else {
- /*
- * if we have hashes and we are clearing a multicast promisc
- * flag we need to write the hashes to the MTA as this step
- * was previously skipped
- */
- if (vf_data->num_vf_mc_hashes > 30) {
- vmolr |= E1000_VMOLR_MPME;
- } else if (vf_data->num_vf_mc_hashes) {
- int j;
- vmolr |= E1000_VMOLR_ROMPE;
- for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
- igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
- }
- }
-
- wr32(E1000_VMOLR(vf), vmolr);
-
- /* there are flags left unprocessed, likely not supported */
- if (*msgbuf & E1000_VT_MSGINFO_MASK)
- return -EINVAL;
-
- return 0;
-
-}
-
-static int igb_set_vf_multicasts(struct igb_adapter *adapter,
- u32 *msgbuf, u32 vf)
-{
- int n = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
- u16 *hash_list = (u16 *)&msgbuf[1];
- struct vf_data_storage *vf_data = &adapter->vf_data[vf];
- int i;
-
- /* salt away the number of multicast addresses assigned
- * to this VF for later use to restore when the PF multi cast
- * list changes
- */
- vf_data->num_vf_mc_hashes = n;
-
- /* only up to 30 hash values supported */
- if (n > 30)
- n = 30;
-
- /* store the hashes for later use */
- for (i = 0; i < n; i++)
- vf_data->vf_mc_hashes[i] = hash_list[i];
-
- /* Flush and reset the mta with the new values */
- igb_set_rx_mode(adapter->netdev);
-
- return 0;
-}
-
-static void igb_restore_vf_multicasts(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct vf_data_storage *vf_data;
- int i, j;
-
- for (i = 0; i < adapter->vfs_allocated_count; i++) {
- u32 vmolr = rd32(E1000_VMOLR(i));
- vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
-
- vf_data = &adapter->vf_data[i];
-
- if ((vf_data->num_vf_mc_hashes > 30) ||
- (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
- vmolr |= E1000_VMOLR_MPME;
- } else if (vf_data->num_vf_mc_hashes) {
- vmolr |= E1000_VMOLR_ROMPE;
- for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
- igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
- }
- wr32(E1000_VMOLR(i), vmolr);
- }
-}
-
-static void igb_clear_vf_vfta(struct igb_adapter *adapter, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 pool_mask, reg, vid;
- int i;
-
- pool_mask = 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
-
- /* Find the vlan filter for this id */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
-
- /* remove the vf from the pool */
- reg &= ~pool_mask;
-
- /* if pool is empty then remove entry from vfta */
- if (!(reg & E1000_VLVF_POOLSEL_MASK) &&
- (reg & E1000_VLVF_VLANID_ENABLE)) {
- reg = 0;
- vid = reg & E1000_VLVF_VLANID_MASK;
- igb_vfta_set(hw, vid, false);
- }
-
- wr32(E1000_VLVF(i), reg);
- }
-
- adapter->vf_data[vf].vlans_enabled = 0;
-}
-
-static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 reg, i;
-
- /* The vlvf table only exists on 82576 hardware and newer */
- if (hw->mac.type < e1000_82576)
- return -1;
-
- /* we only need to do this if VMDq is enabled */
- if (!adapter->vfs_allocated_count)
- return -1;
-
- /* Find the vlan filter for this id */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
- if ((reg & E1000_VLVF_VLANID_ENABLE) &&
- vid == (reg & E1000_VLVF_VLANID_MASK))
- break;
- }
-
- if (add) {
- if (i == E1000_VLVF_ARRAY_SIZE) {
- /* Did not find a matching VLAN ID entry that was
- * enabled. Search for a free filter entry, i.e.
- * one without the enable bit set
- */
- for (i = 0; i < E1000_VLVF_ARRAY_SIZE; i++) {
- reg = rd32(E1000_VLVF(i));
- if (!(reg & E1000_VLVF_VLANID_ENABLE))
- break;
- }
- }
- if (i < E1000_VLVF_ARRAY_SIZE) {
- /* Found an enabled/available entry */
- reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT + vf);
-
- /* if !enabled we need to set this up in vfta */
- if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
- /* add VID to filter table */
- igb_vfta_set(hw, vid, true);
- reg |= E1000_VLVF_VLANID_ENABLE;
- }
- reg &= ~E1000_VLVF_VLANID_MASK;
- reg |= vid;
- wr32(E1000_VLVF(i), reg);
-
- /* do not modify RLPML for PF devices */
- if (vf >= adapter->vfs_allocated_count)
- return 0;
-
- if (!adapter->vf_data[vf].vlans_enabled) {
- u32 size;
- reg = rd32(E1000_VMOLR(vf));
- size = reg & E1000_VMOLR_RLPML_MASK;
- size += 4;
- reg &= ~E1000_VMOLR_RLPML_MASK;
- reg |= size;
- wr32(E1000_VMOLR(vf), reg);
- }
-
- adapter->vf_data[vf].vlans_enabled++;
- return 0;
- }
- } else {
- if (i < E1000_VLVF_ARRAY_SIZE) {
- /* remove vf from the pool */
- reg &= ~(1 << (E1000_VLVF_POOLSEL_SHIFT + vf));
- /* if pool is empty then remove entry from vfta */
- if (!(reg & E1000_VLVF_POOLSEL_MASK)) {
- reg = 0;
- igb_vfta_set(hw, vid, false);
- }
- wr32(E1000_VLVF(i), reg);
-
- /* do not modify RLPML for PF devices */
- if (vf >= adapter->vfs_allocated_count)
- return 0;
-
- adapter->vf_data[vf].vlans_enabled--;
- if (!adapter->vf_data[vf].vlans_enabled) {
- u32 size;
- reg = rd32(E1000_VMOLR(vf));
- size = reg & E1000_VMOLR_RLPML_MASK;
- size -= 4;
- reg &= ~E1000_VMOLR_RLPML_MASK;
- reg |= size;
- wr32(E1000_VMOLR(vf), reg);
- }
- }
- }
- return 0;
-}
-
-static void igb_set_vmvir(struct igb_adapter *adapter, u32 vid, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- if (vid)
- wr32(E1000_VMVIR(vf), (vid | E1000_VMVIR_VLANA_DEFAULT));
- else
- wr32(E1000_VMVIR(vf), 0);
-}
-
-static int igb_ndo_set_vf_vlan(struct net_device *netdev,
- int vf, u16 vlan, u8 qos)
-{
- int err = 0;
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- if ((vf >= adapter->vfs_allocated_count) || (vlan > 4095) || (qos > 7))
- return -EINVAL;
- if (vlan || qos) {
- err = igb_vlvf_set(adapter, vlan, !!vlan, vf);
- if (err)
- goto out;
- igb_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
- igb_set_vmolr(adapter, vf, !vlan);
- adapter->vf_data[vf].pf_vlan = vlan;
- adapter->vf_data[vf].pf_qos = qos;
- dev_info(&adapter->pdev->dev,
- "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
- if (test_bit(__IGB_DOWN, &adapter->state)) {
- dev_warn(&adapter->pdev->dev,
- "The VF VLAN has been set,"
- " but the PF device is not up.\n");
- dev_warn(&adapter->pdev->dev,
- "Bring the PF device up before"
- " attempting to use the VF device.\n");
- }
- } else {
- igb_vlvf_set(adapter, adapter->vf_data[vf].pf_vlan,
- false, vf);
- igb_set_vmvir(adapter, vlan, vf);
- igb_set_vmolr(adapter, vf, true);
- adapter->vf_data[vf].pf_vlan = 0;
- adapter->vf_data[vf].pf_qos = 0;
- }
-out:
- return err;
-}
-
-static int igb_set_vf_vlan(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
-{
- int add = (msgbuf[0] & E1000_VT_MSGINFO_MASK) >> E1000_VT_MSGINFO_SHIFT;
- int vid = (msgbuf[1] & E1000_VLVF_VLANID_MASK);
-
- return igb_vlvf_set(adapter, vid, add, vf);
-}
-
-static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
-{
- /* clear flags - except flag that indicates PF has set the MAC */
- adapter->vf_data[vf].flags &= IGB_VF_FLAG_PF_SET_MAC;
- adapter->vf_data[vf].last_nack = jiffies;
-
- /* reset offloads to defaults */
- igb_set_vmolr(adapter, vf, true);
-
- /* reset vlans for device */
- igb_clear_vf_vfta(adapter, vf);
- if (adapter->vf_data[vf].pf_vlan)
- igb_ndo_set_vf_vlan(adapter->netdev, vf,
- adapter->vf_data[vf].pf_vlan,
- adapter->vf_data[vf].pf_qos);
- else
- igb_clear_vf_vfta(adapter, vf);
-
- /* reset multicast table array for vf */
- adapter->vf_data[vf].num_vf_mc_hashes = 0;
-
- /* Flush and reset the mta with the new values */
- igb_set_rx_mode(adapter->netdev);
-}
-
-static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
-{
- unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
-
- /* generate a new mac address as we were hotplug removed/added */
- if (!(adapter->vf_data[vf].flags & IGB_VF_FLAG_PF_SET_MAC))
- random_ether_addr(vf_mac);
-
- /* process remaining reset events */
- igb_vf_reset(adapter, vf);
-}
-
-static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
- int rar_entry = hw->mac.rar_entry_count - (vf + 1);
- u32 reg, msgbuf[3];
- u8 *addr = (u8 *)(&msgbuf[1]);
-
- /* process all the same items cleared in a function level reset */
- igb_vf_reset(adapter, vf);
-
- /* set vf mac address */
- igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
-
- /* enable transmit and receive for vf */
- reg = rd32(E1000_VFTE);
- wr32(E1000_VFTE, reg | (1 << vf));
- reg = rd32(E1000_VFRE);
- wr32(E1000_VFRE, reg | (1 << vf));
-
- adapter->vf_data[vf].flags |= IGB_VF_FLAG_CTS;
-
- /* reply to reset with ack and vf mac address */
- msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
- memcpy(addr, vf_mac, 6);
- igb_write_mbx(hw, msgbuf, 3, vf);
-}
-
-static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
-{
- /*
- * The VF MAC Address is stored in a packed array of bytes
- * starting at the second 32 bit word of the msg array
- */
- unsigned char *addr = (char *)&msg[1];
- int err = -1;
-
- if (is_valid_ether_addr(addr))
- err = igb_set_vf_mac(adapter, vf, addr);
-
- return err;
-}
-
-static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct vf_data_storage *vf_data = &adapter->vf_data[vf];
- u32 msg = E1000_VT_MSGTYPE_NACK;
-
- /* if device isn't clear to send it shouldn't be reading either */
- if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
- time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
- igb_write_mbx(hw, &msg, 1, vf);
- vf_data->last_nack = jiffies;
- }
-}
-
-static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
-{
- struct pci_dev *pdev = adapter->pdev;
- u32 msgbuf[E1000_VFMAILBOX_SIZE];
- struct e1000_hw *hw = &adapter->hw;
- struct vf_data_storage *vf_data = &adapter->vf_data[vf];
- s32 retval;
-
- retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
-
- if (retval) {
- /* if receive failed revoke VF CTS stats and restart init */
- dev_err(&pdev->dev, "Error receiving message from VF\n");
- vf_data->flags &= ~IGB_VF_FLAG_CTS;
- if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
- return;
- goto out;
- }
-
- /* this is a message we already processed, do nothing */
- if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
- return;
-
- /*
- * until the vf completes a reset it should not be
- * allowed to start any configuration.
- */
-
- if (msgbuf[0] == E1000_VF_RESET) {
- igb_vf_reset_msg(adapter, vf);
- return;
- }
-
- if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
- if (!time_after(jiffies, vf_data->last_nack + (2 * HZ)))
- return;
- retval = -1;
- goto out;
- }
-
- switch ((msgbuf[0] & 0xFFFF)) {
- case E1000_VF_SET_MAC_ADDR:
- retval = -EINVAL;
- if (!(vf_data->flags & IGB_VF_FLAG_PF_SET_MAC))
- retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
- else
- dev_warn(&pdev->dev,
- "VF %d attempted to override administratively "
- "set MAC address\nReload the VF driver to "
- "resume operations\n", vf);
- break;
- case E1000_VF_SET_PROMISC:
- retval = igb_set_vf_promisc(adapter, msgbuf, vf);
- break;
- case E1000_VF_SET_MULTICAST:
- retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
- break;
- case E1000_VF_SET_LPE:
- retval = igb_set_vf_rlpml(adapter, msgbuf[1], vf);
- break;
- case E1000_VF_SET_VLAN:
- retval = -1;
- if (vf_data->pf_vlan)
- dev_warn(&pdev->dev,
- "VF %d attempted to override administratively "
- "set VLAN tag\nReload the VF driver to "
- "resume operations\n", vf);
- else
- retval = igb_set_vf_vlan(adapter, msgbuf, vf);
- break;
- default:
- dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
- retval = -1;
- break;
- }
-
- msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
-out:
- /* notify the VF of the results of what it sent us */
- if (retval)
- msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
- else
- msgbuf[0] |= E1000_VT_MSGTYPE_ACK;
-
- igb_write_mbx(hw, msgbuf, 1, vf);
-}
-
-static void igb_msg_task(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 vf;
-
- for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
- /* process any reset requests */
- if (!igb_check_for_rst(hw, vf))
- igb_vf_reset_event(adapter, vf);
-
- /* process any messages pending */
- if (!igb_check_for_msg(hw, vf))
- igb_rcv_msg_from_vf(adapter, vf);
-
- /* process any acks */
- if (!igb_check_for_ack(hw, vf))
- igb_rcv_ack_from_vf(adapter, vf);
- }
-}
-
-/**
- * igb_set_uta - Set unicast filter table address
- * @adapter: board private structure
- *
- * The unicast table address is a register array of 32-bit registers.
- * The table is meant to be used in a way similar to how the MTA is used
- * however due to certain limitations in the hardware it is necessary to
- * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
- * enable bit to allow vlan tag stripping when promiscuous mode is enabled
- **/
-static void igb_set_uta(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- int i;
-
- /* The UTA table only exists on 82576 hardware and newer */
- if (hw->mac.type < e1000_82576)
- return;
-
- /* we only need to do this if VMDq is enabled */
- if (!adapter->vfs_allocated_count)
- return;
-
- for (i = 0; i < hw->mac.uta_reg_count; i++)
- array_wr32(E1000_UTA, i, ~0);
-}
-
-/**
- * igb_intr_msi - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t igb_intr_msi(int irq, void *data)
-{
- struct igb_adapter *adapter = data;
- struct igb_q_vector *q_vector = adapter->q_vector[0];
- struct e1000_hw *hw = &adapter->hw;
- /* read ICR disables interrupts using IAM */
- u32 icr = rd32(E1000_ICR);
-
- igb_write_itr(q_vector);
-
- if (icr & E1000_ICR_DRSTA)
- schedule_work(&adapter->reset_task);
-
- if (icr & E1000_ICR_DOUTSYNC) {
- /* HW is reporting DMA is out of sync */
- adapter->stats.doosync++;
- }
-
- if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
- hw->mac.get_link_status = 1;
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-/**
- * igb_intr - Legacy Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t igb_intr(int irq, void *data)
-{
- struct igb_adapter *adapter = data;
- struct igb_q_vector *q_vector = adapter->q_vector[0];
- struct e1000_hw *hw = &adapter->hw;
- /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
- * need for the IMC write */
- u32 icr = rd32(E1000_ICR);
- if (!icr)
- return IRQ_NONE; /* Not our interrupt */
-
- igb_write_itr(q_vector);
-
- /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
- * not set, then the adapter didn't send an interrupt */
- if (!(icr & E1000_ICR_INT_ASSERTED))
- return IRQ_NONE;
-
- if (icr & E1000_ICR_DRSTA)
- schedule_work(&adapter->reset_task);
-
- if (icr & E1000_ICR_DOUTSYNC) {
- /* HW is reporting DMA is out of sync */
- adapter->stats.doosync++;
- }
-
- if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
- hw->mac.get_link_status = 1;
- /* guard against interrupt when we're going down */
- if (!test_bit(__IGB_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
- }
-
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
-
- if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
- (!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
- if (!adapter->msix_entries)
- igb_set_itr(adapter);
- else
- igb_update_ring_itr(q_vector);
- }
-
- if (!test_bit(__IGB_DOWN, &adapter->state)) {
- if (adapter->msix_entries)
- wr32(E1000_EIMS, q_vector->eims_value);
- else
- igb_irq_enable(adapter);
- }
-}
-
-/**
- * igb_poll - NAPI Rx polling callback
- * @napi: napi polling structure
- * @budget: count of how many packets we should handle
- **/
-static int igb_poll(struct napi_struct *napi, int budget)
-{
- struct igb_q_vector *q_vector = container_of(napi,
- struct igb_q_vector,
- napi);
- int tx_clean_complete = 1, work_done = 0;
-
-#ifdef CONFIG_IGB_DCA
- if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
- igb_update_dca(q_vector);
-#endif
- if (q_vector->tx_ring)
- tx_clean_complete = igb_clean_tx_irq(q_vector);
-
- if (q_vector->rx_ring)
- igb_clean_rx_irq_adv(q_vector, &work_done, budget);
-
- if (!tx_clean_complete)
- work_done = budget;
-
- /* If not enough Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- igb_ring_irq_enable(q_vector);
- }
-
- return work_done;
-}
-
-/**
- * igb_systim_to_hwtstamp - convert system time value to hw timestamp
- * @adapter: board private structure
- * @shhwtstamps: timestamp structure to update
- * @regval: unsigned 64bit system time value.
- *
- * We need to convert the system time value stored in the RX/TXSTMP registers
- * into a hwtstamp which can be used by the upper level timestamping functions
- */
-static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
- struct skb_shared_hwtstamps *shhwtstamps,
- u64 regval)
-{
- u64 ns;
-
- /*
- * The 82580 starts with 1ns at bit 0 in RX/TXSTMPL, shift this up to
- * 24 to match clock shift we setup earlier.
- */
- if (adapter->hw.mac.type == e1000_82580)
- regval <<= IGB_82580_TSYNC_SHIFT;
-
- ns = timecounter_cyc2time(&adapter->clock, regval);
- timecompare_update(&adapter->compare, ns);
- memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
- shhwtstamps->hwtstamp = ns_to_ktime(ns);
- shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
-}
-
-/**
- * igb_tx_hwtstamp - utility function which checks for TX time stamp
- * @q_vector: pointer to q_vector containing needed info
- * @buffer: pointer to igb_buffer structure
- *
- * If we were asked to do hardware stamping and such a time stamp is
- * available, then it must have been for this skb here because we only
- * allow only one such packet into the queue.
- */
-static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, struct igb_buffer *buffer_info)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- struct skb_shared_hwtstamps shhwtstamps;
- u64 regval;
-
- /* if skb does not support hw timestamp or TX stamp not valid exit */
- if (likely(!(buffer_info->tx_flags & SKBTX_HW_TSTAMP)) ||
- !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
- return;
-
- regval = rd32(E1000_TXSTMPL);
- regval |= (u64)rd32(E1000_TXSTMPH) << 32;
-
- igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
- skb_tstamp_tx(buffer_info->skb, &shhwtstamps);
-}
-
-/**
- * igb_clean_tx_irq - Reclaim resources after transmit completes
- * @q_vector: pointer to q_vector containing needed info
- * returns true if ring is completely cleaned
- **/
-static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct igb_ring *tx_ring = q_vector->tx_ring;
- struct net_device *netdev = tx_ring->netdev;
- struct e1000_hw *hw = &adapter->hw;
- struct igb_buffer *buffer_info;
- union e1000_adv_tx_desc *tx_desc, *eop_desc;
- unsigned int total_bytes = 0, total_packets = 0;
- unsigned int i, eop, count = 0;
- bool cleaned = false;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
-
- while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- (count < tx_ring->count)) {
- rmb(); /* read buffer_info after eop_desc status */
- for (cleaned = false; !cleaned; count++) {
- tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- cleaned = (i == eop);
-
- if (buffer_info->skb) {
- total_bytes += buffer_info->bytecount;
- /* gso_segs is currently only valid for tcp */
- total_packets += buffer_info->gso_segs;
- igb_tx_hwtstamp(q_vector, buffer_info);
- }
-
- igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
- tx_desc->wb.status = 0;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = E1000_TX_DESC_ADV(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
- if (unlikely(count &&
- netif_carrier_ok(netdev) &&
- igb_desc_unused(tx_ring) >= IGB_TX_QUEUE_WAKE)) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
- if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
- !(test_bit(__IGB_DOWN, &adapter->state))) {
- netif_wake_subqueue(netdev, tx_ring->queue_index);
-
- u64_stats_update_begin(&tx_ring->tx_syncp);
- tx_ring->tx_stats.restart_queue++;
- u64_stats_update_end(&tx_ring->tx_syncp);
- }
- }
-
- if (tx_ring->detect_tx_hung) {
- /* Detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
- tx_ring->detect_tx_hung = false;
- if (tx_ring->buffer_info[i].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[i].time_stamp +
- (adapter->tx_timeout_factor * HZ)) &&
- !(rd32(E1000_STATUS) & E1000_STATUS_TXOFF)) {
-
- /* detected Tx unit hang */
- dev_err(tx_ring->dev,
- "Detected Tx Unit Hang\n"
- " Tx Queue <%d>\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " desc.status <%x>\n",
- tx_ring->queue_index,
- readl(tx_ring->head),
- readl(tx_ring->tail),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->wb.status);
- netif_stop_subqueue(netdev, tx_ring->queue_index);
- }
- }
- tx_ring->total_bytes += total_bytes;
- tx_ring->total_packets += total_packets;
- u64_stats_update_begin(&tx_ring->tx_syncp);
- tx_ring->tx_stats.bytes += total_bytes;
- tx_ring->tx_stats.packets += total_packets;
- u64_stats_update_end(&tx_ring->tx_syncp);
- return count < tx_ring->count;
-}
-
-static inline void igb_rx_checksum_adv(struct igb_ring *ring,
- u32 status_err, struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- /* Ignore Checksum bit is set or checksum is disabled through ethtool */
- if (!(ring->flags & IGB_RING_FLAG_RX_CSUM) ||
- (status_err & E1000_RXD_STAT_IXSM))
- return;
-
- /* TCP/UDP checksum error bit is set */
- if (status_err &
- (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
- /*
- * work around errata with sctp packets where the TCPE aka
- * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
- * packets, (aka let the stack check the crc32c)
- */
- if ((skb->len == 60) &&
- (ring->flags & IGB_RING_FLAG_RX_SCTP_CSUM)) {
- u64_stats_update_begin(&ring->rx_syncp);
- ring->rx_stats.csum_err++;
- u64_stats_update_end(&ring->rx_syncp);
- }
- /* let the stack verify checksum errors */
- return;
- }
- /* It must be a TCP or UDP packet with a valid checksum */
- if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- dev_dbg(ring->dev, "cksum success: bits %08X\n", status_err);
-}
-
-static void igb_rx_hwtstamp(struct igb_q_vector *q_vector, u32 staterr,
- struct sk_buff *skb)
-{
- struct igb_adapter *adapter = q_vector->adapter;
- struct e1000_hw *hw = &adapter->hw;
- u64 regval;
-
- /*
- * If this bit is set, then the RX registers contain the time stamp. No
- * other packet will be time stamped until we read these registers, so
- * read the registers to make them available again. Because only one
- * packet can be time stamped at a time, we know that the register
- * values must belong to this one here and therefore we don't need to
- * compare any of the additional attributes stored for it.
- *
- * If nothing went wrong, then it should have a shared tx_flags that we
- * can turn into a skb_shared_hwtstamps.
- */
- if (staterr & E1000_RXDADV_STAT_TSIP) {
- u32 *stamp = (u32 *)skb->data;
- regval = le32_to_cpu(*(stamp + 2));
- regval |= (u64)le32_to_cpu(*(stamp + 3)) << 32;
- skb_pull(skb, IGB_TS_HDR_LEN);
- } else {
- if(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
- return;
-
- regval = rd32(E1000_RXSTMPL);
- regval |= (u64)rd32(E1000_RXSTMPH) << 32;
- }
-
- igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
-}
-static inline u16 igb_get_hlen(struct igb_ring *rx_ring,
- union e1000_adv_rx_desc *rx_desc)
-{
- /* HW will not DMA in data larger than the given buffer, even if it
- * parses the (NFS, of course) header to be larger. In that case, it
- * fills the header buffer and spills the rest into the page.
- */
- u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
- E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
- if (hlen > rx_ring->rx_buffer_len)
- hlen = rx_ring->rx_buffer_len;
- return hlen;
-}
-
-static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
- int *work_done, int budget)
-{
- struct igb_ring *rx_ring = q_vector->rx_ring;
- struct net_device *netdev = rx_ring->netdev;
- struct device *dev = rx_ring->dev;
- union e1000_adv_rx_desc *rx_desc , *next_rxd;
- struct igb_buffer *buffer_info , *next_buffer;
- struct sk_buff *skb;
- bool cleaned = false;
- int cleaned_count = 0;
- int current_node = numa_node_id();
- unsigned int total_bytes = 0, total_packets = 0;
- unsigned int i;
- u32 staterr;
- u16 length;
-
- i = rx_ring->next_to_clean;
- buffer_info = &rx_ring->buffer_info[i];
- rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-
- while (staterr & E1000_RXD_STAT_DD) {
- if (*work_done >= budget)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- skb = buffer_info->skb;
- prefetch(skb->data - NET_IP_ALIGN);
- buffer_info->skb = NULL;
-
- i++;
- if (i == rx_ring->count)
- i = 0;
-
- next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
- prefetch(next_rxd);
- next_buffer = &rx_ring->buffer_info[i];
-
- length = le16_to_cpu(rx_desc->wb.upper.length);
- cleaned = true;
- cleaned_count++;
-
- if (buffer_info->dma) {
- dma_unmap_single(dev, buffer_info->dma,
- rx_ring->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- if (rx_ring->rx_buffer_len >= IGB_RXBUFFER_1024) {
- skb_put(skb, length);
- goto send_up;
- }
- skb_put(skb, igb_get_hlen(rx_ring, rx_desc));
- }
-
- if (length) {
- dma_unmap_page(dev, buffer_info->page_dma,
- PAGE_SIZE / 2, DMA_FROM_DEVICE);
- buffer_info->page_dma = 0;
-
- skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
- buffer_info->page,
- buffer_info->page_offset,
- length);
-
- if ((page_count(buffer_info->page) != 1) ||
- (page_to_nid(buffer_info->page) != current_node))
- buffer_info->page = NULL;
- else
- get_page(buffer_info->page);
-
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
- }
-
- if (!(staterr & E1000_RXD_STAT_EOP)) {
- buffer_info->skb = next_buffer->skb;
- buffer_info->dma = next_buffer->dma;
- next_buffer->skb = skb;
- next_buffer->dma = 0;
- goto next_desc;
- }
-send_up:
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- if (staterr & (E1000_RXDADV_STAT_TSIP | E1000_RXDADV_STAT_TS))
- igb_rx_hwtstamp(q_vector, staterr, skb);
- total_bytes += skb->len;
- total_packets++;
-
- igb_rx_checksum_adv(rx_ring, staterr, skb);
-
- skb->protocol = eth_type_trans(skb, netdev);
- skb_record_rx_queue(skb, rx_ring->queue_index);
-
- if (staterr & E1000_RXD_STAT_VP) {
- u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan);
-
- __vlan_hwaccel_put_tag(skb, vid);
- }
- napi_gro_receive(&q_vector->napi, skb);
-
-next_desc:
- rx_desc->wb.upper.status_error = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= IGB_RX_BUFFER_WRITE) {
- igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- rx_ring->next_to_clean = i;
- cleaned_count = igb_desc_unused(rx_ring);
-
- if (cleaned_count)
- igb_alloc_rx_buffers_adv(rx_ring, cleaned_count);
-
- rx_ring->total_packets += total_packets;
- rx_ring->total_bytes += total_bytes;
- u64_stats_update_begin(&rx_ring->rx_syncp);
- rx_ring->rx_stats.packets += total_packets;
- rx_ring->rx_stats.bytes += total_bytes;
- u64_stats_update_end(&rx_ring->rx_syncp);
- return cleaned;
-}
-
-/**
- * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
- * @adapter: address of board private structure
- **/
-void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count)
-{
- struct net_device *netdev = rx_ring->netdev;
- union e1000_adv_rx_desc *rx_desc;
- struct igb_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- int bufsz;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- bufsz = rx_ring->rx_buffer_len;
-
- while (cleaned_count--) {
- rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
-
- if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
- if (!buffer_info->page) {
- buffer_info->page = netdev_alloc_page(netdev);
- if (unlikely(!buffer_info->page)) {
- u64_stats_update_begin(&rx_ring->rx_syncp);
- rx_ring->rx_stats.alloc_failed++;
- u64_stats_update_end(&rx_ring->rx_syncp);
- goto no_buffers;
- }
- buffer_info->page_offset = 0;
- } else {
- buffer_info->page_offset ^= PAGE_SIZE / 2;
- }
- buffer_info->page_dma =
- dma_map_page(rx_ring->dev, buffer_info->page,
- buffer_info->page_offset,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev,
- buffer_info->page_dma)) {
- buffer_info->page_dma = 0;
- u64_stats_update_begin(&rx_ring->rx_syncp);
- rx_ring->rx_stats.alloc_failed++;
- u64_stats_update_end(&rx_ring->rx_syncp);
- goto no_buffers;
- }
- }
-
- skb = buffer_info->skb;
- if (!skb) {
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- if (unlikely(!skb)) {
- u64_stats_update_begin(&rx_ring->rx_syncp);
- rx_ring->rx_stats.alloc_failed++;
- u64_stats_update_end(&rx_ring->rx_syncp);
- goto no_buffers;
- }
-
- buffer_info->skb = skb;
- }
- if (!buffer_info->dma) {
- buffer_info->dma = dma_map_single(rx_ring->dev,
- skb->data,
- bufsz,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev,
- buffer_info->dma)) {
- buffer_info->dma = 0;
- u64_stats_update_begin(&rx_ring->rx_syncp);
- rx_ring->rx_stats.alloc_failed++;
- u64_stats_update_end(&rx_ring->rx_syncp);
- goto no_buffers;
- }
- }
- /* Refresh the desc even if buffer_addrs didn't change because
- * each write-back erases this info. */
- if (bufsz < IGB_RXBUFFER_1024) {
- rx_desc->read.pkt_addr =
- cpu_to_le64(buffer_info->page_dma);
- rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
- } else {
- rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
- rx_desc->read.hdr_addr = 0;
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
-no_buffers:
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- if (i == 0)
- i = (rx_ring->count - 1);
- else
- i--;
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, rx_ring->tail);
- }
-}
-
-/**
- * igb_mii_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- **/
-static int igb_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct mii_ioctl_data *data = if_mii(ifr);
-
- if (adapter->hw.phy.media_type != e1000_media_type_copper)
- return -EOPNOTSUPP;
-
- switch (cmd) {
- case SIOCGMIIPHY:
- data->phy_id = adapter->hw.phy.addr;
- break;
- case SIOCGMIIREG:
- if (igb_read_phy_reg(&adapter->hw, data->reg_num & 0x1F,
- &data->val_out))
- return -EIO;
- break;
- case SIOCSMIIREG:
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-/**
- * igb_hwtstamp_ioctl - control hardware time stamping
- * @netdev:
- * @ifreq:
- * @cmd:
- *
- * Outgoing time stamping can be enabled and disabled. Play nice and
- * disable it when requested, although it shouldn't case any overhead
- * when no packet needs it. At most one packet in the queue may be
- * marked for time stamping, otherwise it would be impossible to tell
- * for sure to which packet the hardware time stamp belongs.
- *
- * Incoming time stamping has to be configured via the hardware
- * filters. Not all combinations are supported, in particular event
- * type has to be specified. Matching the kind of event packet is
- * not supported, with the exception of "all V2 events regardless of
- * level 2 or 4".
- *
- **/
-static int igb_hwtstamp_ioctl(struct net_device *netdev,
- struct ifreq *ifr, int cmd)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct hwtstamp_config config;
- u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
- u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
- u32 tsync_rx_cfg = 0;
- bool is_l4 = false;
- bool is_l2 = false;
- u32 regval;
-
- if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
- return -EFAULT;
-
- /* reserved for future extensions */
- if (config.flags)
- return -EINVAL;
-
- switch (config.tx_type) {
- case HWTSTAMP_TX_OFF:
- tsync_tx_ctl = 0;
- case HWTSTAMP_TX_ON:
- break;
- default:
- return -ERANGE;
- }
-
- switch (config.rx_filter) {
- case HWTSTAMP_FILTER_NONE:
- tsync_rx_ctl = 0;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
- case HWTSTAMP_FILTER_ALL:
- /*
- * register TSYNCRXCFG must be set, therefore it is not
- * possible to time stamp both Sync and Delay_Req messages
- * => fall back to time stamping all packets
- */
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
- config.rx_filter = HWTSTAMP_FILTER_ALL;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
- is_l4 = true;
- break;
- case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
- is_l4 = true;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
- is_l2 = true;
- is_l4 = true;
- config.rx_filter = HWTSTAMP_FILTER_SOME;
- break;
- case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
- case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
- tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
- is_l2 = true;
- is_l4 = true;
- config.rx_filter = HWTSTAMP_FILTER_SOME;
- break;
- case HWTSTAMP_FILTER_PTP_V2_EVENT:
- case HWTSTAMP_FILTER_PTP_V2_SYNC:
- case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
- config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
- is_l2 = true;
- break;
- default:
- return -ERANGE;
- }
-
- if (hw->mac.type == e1000_82575) {
- if (tsync_rx_ctl | tsync_tx_ctl)
- return -EINVAL;
- return 0;
- }
-
- /*
- * Per-packet timestamping only works if all packets are
- * timestamped, so enable timestamping in all packets as
- * long as one rx filter was configured.
- */
- if ((hw->mac.type == e1000_82580) && tsync_rx_ctl) {
- tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
- tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
- }
-
- /* enable/disable TX */
- regval = rd32(E1000_TSYNCTXCTL);
- regval &= ~E1000_TSYNCTXCTL_ENABLED;
- regval |= tsync_tx_ctl;
- wr32(E1000_TSYNCTXCTL, regval);
-
- /* enable/disable RX */
- regval = rd32(E1000_TSYNCRXCTL);
- regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
- regval |= tsync_rx_ctl;
- wr32(E1000_TSYNCRXCTL, regval);
-
- /* define which PTP packets are time stamped */
- wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
-
- /* define ethertype filter for timestamped packets */
- if (is_l2)
- wr32(E1000_ETQF(3),
- (E1000_ETQF_FILTER_ENABLE | /* enable filter */
- E1000_ETQF_1588 | /* enable timestamping */
- ETH_P_1588)); /* 1588 eth protocol type */
- else
- wr32(E1000_ETQF(3), 0);
-
-#define PTP_PORT 319
- /* L4 Queue Filter[3]: filter by destination port and protocol */
- if (is_l4) {
- u32 ftqf = (IPPROTO_UDP /* UDP */
- | E1000_FTQF_VF_BP /* VF not compared */
- | E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
- | E1000_FTQF_MASK); /* mask all inputs */
- ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
-
- wr32(E1000_IMIR(3), htons(PTP_PORT));
- wr32(E1000_IMIREXT(3),
- (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
- if (hw->mac.type == e1000_82576) {
- /* enable source port check */
- wr32(E1000_SPQF(3), htons(PTP_PORT));
- ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
- }
- wr32(E1000_FTQF(3), ftqf);
- } else {
- wr32(E1000_FTQF(3), E1000_FTQF_MASK);
- }
- wrfl();
-
- adapter->hwtstamp_config = config;
-
- /* clear TX/RX time stamp registers, just to be sure */
- regval = rd32(E1000_TXSTMPH);
- regval = rd32(E1000_RXSTMPH);
-
- return copy_to_user(ifr->ifr_data, &config, sizeof(config)) ?
- -EFAULT : 0;
-}
-
-/**
- * igb_ioctl -
- * @netdev:
- * @ifreq:
- * @cmd:
- **/
-static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- case SIOCGMIIPHY:
- case SIOCGMIIREG:
- case SIOCSMIIREG:
- return igb_mii_ioctl(netdev, ifr, cmd);
- case SIOCSHWTSTAMP:
- return igb_hwtstamp_ioctl(netdev, ifr, cmd);
- default:
- return -EOPNOTSUPP;
- }
-}
-
-s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
- struct igb_adapter *adapter = hw->back;
- u16 cap_offset;
-
- cap_offset = adapter->pdev->pcie_cap;
- if (!cap_offset)
- return -E1000_ERR_CONFIG;
-
- pci_read_config_word(adapter->pdev, cap_offset + reg, value);
-
- return 0;
-}
-
-s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
-{
- struct igb_adapter *adapter = hw->back;
- u16 cap_offset;
-
- cap_offset = adapter->pdev->pcie_cap;
- if (!cap_offset)
- return -E1000_ERR_CONFIG;
-
- pci_write_config_word(adapter->pdev, cap_offset + reg, *value);
-
- return 0;
-}
-
-static void igb_vlan_mode(struct net_device *netdev, u32 features)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, rctl;
-
- igb_irq_disable(adapter);
-
- if (features & NETIF_F_HW_VLAN_RX) {
- /* enable VLAN tag insert/strip */
- ctrl = rd32(E1000_CTRL);
- ctrl |= E1000_CTRL_VME;
- wr32(E1000_CTRL, ctrl);
-
- /* Disable CFI check */
- rctl = rd32(E1000_RCTL);
- rctl &= ~E1000_RCTL_CFIEN;
- wr32(E1000_RCTL, rctl);
- } else {
- /* disable VLAN tag insert/strip */
- ctrl = rd32(E1000_CTRL);
- ctrl &= ~E1000_CTRL_VME;
- wr32(E1000_CTRL, ctrl);
- }
-
- igb_rlpml_set(adapter);
-
- if (!test_bit(__IGB_DOWN, &adapter->state))
- igb_irq_enable(adapter);
-}
-
-static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int pf_id = adapter->vfs_allocated_count;
-
- /* attempt to add filter to vlvf array */
- igb_vlvf_set(adapter, vid, true, pf_id);
-
- /* add the filter since PF can receive vlans w/o entry in vlvf */
- igb_vfta_set(hw, vid, true);
-
- set_bit(vid, adapter->active_vlans);
-}
-
-static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int pf_id = adapter->vfs_allocated_count;
- s32 err;
-
- igb_irq_disable(adapter);
-
- if (!test_bit(__IGB_DOWN, &adapter->state))
- igb_irq_enable(adapter);
-
- /* remove vlan from VLVF table array */
- err = igb_vlvf_set(adapter, vid, false, pf_id);
-
- /* if vid was not present in VLVF just remove it from table */
- if (err)
- igb_vfta_set(hw, vid, false);
-
- clear_bit(vid, adapter->active_vlans);
-}
-
-static void igb_restore_vlan(struct igb_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- igb_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-int igb_set_spd_dplx(struct igb_adapter *adapter, u32 spd, u8 dplx)
-{
- struct pci_dev *pdev = adapter->pdev;
- struct e1000_mac_info *mac = &adapter->hw.mac;
-
- mac->autoneg = 0;
-
- /* Make sure dplx is at most 1 bit and lsb of speed is not set
- * for the switch() below to work */
- if ((spd & 1) || (dplx & ~1))
- goto err_inval;
-
- /* Fiber NIC's only allow 1000 Gbps Full duplex */
- if ((adapter->hw.phy.media_type == e1000_media_type_internal_serdes) &&
- spd != SPEED_1000 &&
- dplx != DUPLEX_FULL)
- goto err_inval;
-
- switch (spd + dplx) {
- case SPEED_10 + DUPLEX_HALF:
- mac->forced_speed_duplex = ADVERTISE_10_HALF;
- break;
- case SPEED_10 + DUPLEX_FULL:
- mac->forced_speed_duplex = ADVERTISE_10_FULL;
- break;
- case SPEED_100 + DUPLEX_HALF:
- mac->forced_speed_duplex = ADVERTISE_100_HALF;
- break;
- case SPEED_100 + DUPLEX_FULL:
- mac->forced_speed_duplex = ADVERTISE_100_FULL;
- break;
- case SPEED_1000 + DUPLEX_FULL:
- mac->autoneg = 1;
- adapter->hw.phy.autoneg_advertised = ADVERTISE_1000_FULL;
- break;
- case SPEED_1000 + DUPLEX_HALF: /* not supported */
- default:
- goto err_inval;
- }
- return 0;
-
-err_inval:
- dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
- return -EINVAL;
-}
-
-static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 ctrl, rctl, status;
- u32 wufc = adapter->wol;
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev))
- igb_close(netdev);
-
- igb_clear_interrupt_scheme(adapter);
-
-#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-#endif
-
- status = rd32(E1000_STATUS);
- if (status & E1000_STATUS_LU)
- wufc &= ~E1000_WUFC_LNKC;
-
- if (wufc) {
- igb_setup_rctl(adapter);
- igb_set_rx_mode(netdev);
-
- /* turn on all-multi mode if wake on multicast is enabled */
- if (wufc & E1000_WUFC_MC) {
- rctl = rd32(E1000_RCTL);
- rctl |= E1000_RCTL_MPE;
- wr32(E1000_RCTL, rctl);
- }
-
- ctrl = rd32(E1000_CTRL);
- /* advertise wake from D3Cold */
- #define E1000_CTRL_ADVD3WUC 0x00100000
- /* phy power management enable */
- #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
- ctrl |= E1000_CTRL_ADVD3WUC;
- wr32(E1000_CTRL, ctrl);
-
- /* Allow time for pending master requests to run */
- igb_disable_pcie_master(hw);
-
- wr32(E1000_WUC, E1000_WUC_PME_EN);
- wr32(E1000_WUFC, wufc);
- } else {
- wr32(E1000_WUC, 0);
- wr32(E1000_WUFC, 0);
- }
-
- *enable_wake = wufc || adapter->en_mng_pt;
- if (!*enable_wake)
- igb_power_down_link(adapter);
- else
- igb_power_up_link(adapter);
-
- /* Release control of h/w to f/w. If f/w is AMT enabled, this
- * would have already happened in close and is redundant. */
- igb_release_hw_control(adapter);
-
- pci_disable_device(pdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int igb_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- int retval;
- bool wake;
-
- retval = __igb_shutdown(pdev, &wake);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
-}
-
-static int igb_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 err;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- pci_save_state(pdev);
-
- err = pci_enable_device_mem(pdev);
- if (err) {
- dev_err(&pdev->dev,
- "igb: Cannot enable PCI device from suspend\n");
- return err;
- }
- pci_set_master(pdev);
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
- if (igb_init_interrupt_scheme(adapter)) {
- dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
- return -ENOMEM;
- }
-
- igb_reset(adapter);
-
- /* let the f/w know that the h/w is now under the control of the
- * driver. */
- igb_get_hw_control(adapter);
-
- wr32(E1000_WUS, ~0);
-
- if (netif_running(netdev)) {
- err = igb_open(netdev);
- if (err)
- return err;
- }
-
- netif_device_attach(netdev);
-
- return 0;
-}
-#endif
-
-static void igb_shutdown(struct pci_dev *pdev)
-{
- bool wake;
-
- __igb_shutdown(pdev, &wake);
-
- if (system_state == SYSTEM_POWER_OFF) {
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void igb_netpoll(struct net_device *netdev)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int i;
-
- if (!adapter->msix_entries) {
- struct igb_q_vector *q_vector = adapter->q_vector[0];
- igb_irq_disable(adapter);
- napi_schedule(&q_vector->napi);
- return;
- }
-
- for (i = 0; i < adapter->num_q_vectors; i++) {
- struct igb_q_vector *q_vector = adapter->q_vector[i];
- wr32(E1000_EIMC, q_vector->eims_value);
- napi_schedule(&q_vector->napi);
- }
-}
-#endif /* CONFIG_NET_POLL_CONTROLLER */
-
-/**
- * igb_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t igb_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- igb_down(adapter);
- pci_disable_device(pdev);
-
- /* Request a slot slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * igb_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the igb_resume routine.
- */
-static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- pci_ers_result_t result;
- int err;
-
- if (pci_enable_device_mem(pdev)) {
- dev_err(&pdev->dev,
- "Cannot re-enable PCI device after reset.\n");
- result = PCI_ERS_RESULT_DISCONNECT;
- } else {
- pci_set_master(pdev);
- pci_restore_state(pdev);
- pci_save_state(pdev);
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
-
- igb_reset(adapter);
- wr32(E1000_WUS, ~0);
- result = PCI_ERS_RESULT_RECOVERED;
- }
-
- err = pci_cleanup_aer_uncorrect_error_status(pdev);
- if (err) {
- dev_err(&pdev->dev, "pci_cleanup_aer_uncorrect_error_status "
- "failed 0x%0x\n", err);
- /* non-fatal, continue */
- }
-
- return result;
-}
-
-/**
- * igb_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation. Implementation resembles the
- * second-half of the igb_resume routine.
- */
-static void igb_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igb_adapter *adapter = netdev_priv(netdev);
-
- if (netif_running(netdev)) {
- if (igb_up(adapter)) {
- dev_err(&pdev->dev, "igb_up failed after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
-
- /* let the f/w know that the h/w is now under the control of the
- * driver. */
- igb_get_hw_control(adapter);
-}
-
-static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
- u8 qsel)
-{
- u32 rar_low, rar_high;
- struct e1000_hw *hw = &adapter->hw;
-
- /* HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
- ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
- rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
-
- /* Indicate to hardware the Address is Valid. */
- rar_high |= E1000_RAH_AV;
-
- if (hw->mac.type == e1000_82575)
- rar_high |= E1000_RAH_POOL_1 * qsel;
- else
- rar_high |= E1000_RAH_POOL_1 << qsel;
-
- wr32(E1000_RAL(index), rar_low);
- wrfl();
- wr32(E1000_RAH(index), rar_high);
- wrfl();
-}
-
-static int igb_set_vf_mac(struct igb_adapter *adapter,
- int vf, unsigned char *mac_addr)
-{
- struct e1000_hw *hw = &adapter->hw;
- /* VF MAC addresses start at end of receive addresses and moves
- * torwards the first, as a result a collision should not be possible */
- int rar_entry = hw->mac.rar_entry_count - (vf + 1);
-
- memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
-
- igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
-
- return 0;
-}
-
-static int igb_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- if (!is_valid_ether_addr(mac) || (vf >= adapter->vfs_allocated_count))
- return -EINVAL;
- adapter->vf_data[vf].flags |= IGB_VF_FLAG_PF_SET_MAC;
- dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
- dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
- " change effective.");
- if (test_bit(__IGB_DOWN, &adapter->state)) {
- dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
- " but the PF device is not up.\n");
- dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
- " attempting to use the VF device.\n");
- }
- return igb_set_vf_mac(adapter, vf, mac);
-}
-
-static int igb_link_mbps(int internal_link_speed)
-{
- switch (internal_link_speed) {
- case SPEED_100:
- return 100;
- case SPEED_1000:
- return 1000;
- default:
- return 0;
- }
-}
-
-static void igb_set_vf_rate_limit(struct e1000_hw *hw, int vf, int tx_rate,
- int link_speed)
-{
- int rf_dec, rf_int;
- u32 bcnrc_val;
-
- if (tx_rate != 0) {
- /* Calculate the rate factor values to set */
- rf_int = link_speed / tx_rate;
- rf_dec = (link_speed - (rf_int * tx_rate));
- rf_dec = (rf_dec * (1<<E1000_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
-
- bcnrc_val = E1000_RTTBCNRC_RS_ENA;
- bcnrc_val |= ((rf_int<<E1000_RTTBCNRC_RF_INT_SHIFT) &
- E1000_RTTBCNRC_RF_INT_MASK);
- bcnrc_val |= (rf_dec & E1000_RTTBCNRC_RF_DEC_MASK);
- } else {
- bcnrc_val = 0;
- }
-
- wr32(E1000_RTTDQSEL, vf); /* vf X uses queue X */
- wr32(E1000_RTTBCNRC, bcnrc_val);
-}
-
-static void igb_check_vf_rate_limit(struct igb_adapter *adapter)
-{
- int actual_link_speed, i;
- bool reset_rate = false;
-
- /* VF TX rate limit was not set or not supported */
- if ((adapter->vf_rate_link_speed == 0) ||
- (adapter->hw.mac.type != e1000_82576))
- return;
-
- actual_link_speed = igb_link_mbps(adapter->link_speed);
- if (actual_link_speed != adapter->vf_rate_link_speed) {
- reset_rate = true;
- adapter->vf_rate_link_speed = 0;
- dev_info(&adapter->pdev->dev,
- "Link speed has been changed. VF Transmit "
- "rate is disabled\n");
- }
-
- for (i = 0; i < adapter->vfs_allocated_count; i++) {
- if (reset_rate)
- adapter->vf_data[i].tx_rate = 0;
-
- igb_set_vf_rate_limit(&adapter->hw, i,
- adapter->vf_data[i].tx_rate,
- actual_link_speed);
- }
-}
-
-static int igb_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int actual_link_speed;
-
- if (hw->mac.type != e1000_82576)
- return -EOPNOTSUPP;
-
- actual_link_speed = igb_link_mbps(adapter->link_speed);
- if ((vf >= adapter->vfs_allocated_count) ||
- (!(rd32(E1000_STATUS) & E1000_STATUS_LU)) ||
- (tx_rate < 0) || (tx_rate > actual_link_speed))
- return -EINVAL;
-
- adapter->vf_rate_link_speed = actual_link_speed;
- adapter->vf_data[vf].tx_rate = (u16)tx_rate;
- igb_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
-
- return 0;
-}
-
-static int igb_ndo_get_vf_config(struct net_device *netdev,
- int vf, struct ifla_vf_info *ivi)
-{
- struct igb_adapter *adapter = netdev_priv(netdev);
- if (vf >= adapter->vfs_allocated_count)
- return -EINVAL;
- ivi->vf = vf;
- memcpy(&ivi->mac, adapter->vf_data[vf].vf_mac_addresses, ETH_ALEN);
- ivi->tx_rate = adapter->vf_data[vf].tx_rate;
- ivi->vlan = adapter->vf_data[vf].pf_vlan;
- ivi->qos = adapter->vf_data[vf].pf_qos;
- return 0;
-}
-
-static void igb_vmm_control(struct igb_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 reg;
-
- switch (hw->mac.type) {
- case e1000_82575:
- default:
- /* replication is not supported for 82575 */
- return;
- case e1000_82576:
- /* notify HW that the MAC is adding vlan tags */
- reg = rd32(E1000_DTXCTL);
- reg |= E1000_DTXCTL_VLAN_ADDED;
- wr32(E1000_DTXCTL, reg);
- case e1000_82580:
- /* enable replication vlan tag stripping */
- reg = rd32(E1000_RPLOLR);
- reg |= E1000_RPLOLR_STRVLAN;
- wr32(E1000_RPLOLR, reg);
- case e1000_i350:
- /* none of the above registers are supported by i350 */
- break;
- }
-
- if (adapter->vfs_allocated_count) {
- igb_vmdq_set_loopback_pf(hw, true);
- igb_vmdq_set_replication_pf(hw, true);
- igb_vmdq_set_anti_spoofing_pf(hw, true,
- adapter->vfs_allocated_count);
- } else {
- igb_vmdq_set_loopback_pf(hw, false);
- igb_vmdq_set_replication_pf(hw, false);
- }
-}
-
-/* igb_main.c */
+++ /dev/null
-################################################################################
-#
-# Intel(R) 82576 Virtual Function Linux driver
-# Copyright(c) 2009 - 2010 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) 82576 VF ethernet driver
-#
-
-obj-$(CONFIG_IGBVF) += igbvf.o
-
-igbvf-objs := vf.o \
- mbx.o \
- ethtool.o \
- netdev.o
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_DEFINES_H_
-#define _E1000_DEFINES_H_
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* IVAR valid bit */
-#define E1000_IVAR_VALID 0x80
-
-/* Receive Descriptor bit definitions */
-#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */
-#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */
-#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */
-#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */
-#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-
-#define E1000_RXDEXT_STATERR_CE 0x01000000
-#define E1000_RXDEXT_STATERR_SE 0x02000000
-#define E1000_RXDEXT_STATERR_SEQ 0x04000000
-#define E1000_RXDEXT_STATERR_CXE 0x10000000
-#define E1000_RXDEXT_STATERR_TCPE 0x20000000
-#define E1000_RXDEXT_STATERR_IPE 0x40000000
-#define E1000_RXDEXT_STATERR_RXE 0x80000000
-
-
-/* Same mask, but for extended and packet split descriptors */
-#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
- E1000_RXDEXT_STATERR_CE | \
- E1000_RXDEXT_STATERR_SE | \
- E1000_RXDEXT_STATERR_SEQ | \
- E1000_RXDEXT_STATERR_CXE | \
- E1000_RXDEXT_STATERR_RXE)
-
-/* Device Control */
-#define E1000_CTRL_RST 0x04000000 /* Global reset */
-
-/* Device Status */
-#define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */
-#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */
-#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */
-#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */
-#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */
-#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */
-
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define HALF_DUPLEX 1
-#define FULL_DUPLEX 2
-
-/* Transmit Descriptor bit definitions */
-#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define E1000_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-
-#define MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* 802.1q VLAN Packet Size */
-#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */
-
-/* Error Codes */
-#define E1000_SUCCESS 0
-#define E1000_ERR_CONFIG 3
-#define E1000_ERR_MAC_INIT 5
-#define E1000_ERR_MBX 15
-
-#ifndef ETH_ADDR_LEN
-#define ETH_ADDR_LEN 6
-#endif
-
-/* SRRCTL bit definitions */
-#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */
-#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00
-#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */
-#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
-#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
-#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000
-#define E1000_SRRCTL_DROP_EN 0x80000000
-
-#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F
-#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00
-
-/* Additional Descriptor Control definitions */
-#define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Tx Queue */
-#define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Enable specific Rx Queue */
-
-/* Direct Cache Access (DCA) definitions */
-#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-
-#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
-
-#endif /* _E1000_DEFINES_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for igbvf */
-
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/delay.h>
-
-#include "igbvf.h"
-#include <linux/if_vlan.h>
-
-
-struct igbvf_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
- int base_stat_offset;
-};
-
-#define IGBVF_STAT(current, base) \
- sizeof(((struct igbvf_adapter *)0)->current), \
- offsetof(struct igbvf_adapter, current), \
- offsetof(struct igbvf_adapter, base)
-
-static const struct igbvf_stats igbvf_gstrings_stats[] = {
- { "rx_packets", IGBVF_STAT(stats.gprc, stats.base_gprc) },
- { "tx_packets", IGBVF_STAT(stats.gptc, stats.base_gptc) },
- { "rx_bytes", IGBVF_STAT(stats.gorc, stats.base_gorc) },
- { "tx_bytes", IGBVF_STAT(stats.gotc, stats.base_gotc) },
- { "multicast", IGBVF_STAT(stats.mprc, stats.base_mprc) },
- { "lbrx_bytes", IGBVF_STAT(stats.gorlbc, stats.base_gorlbc) },
- { "lbrx_packets", IGBVF_STAT(stats.gprlbc, stats.base_gprlbc) },
- { "tx_restart_queue", IGBVF_STAT(restart_queue, zero_base) },
- { "rx_long_byte_count", IGBVF_STAT(stats.gorc, stats.base_gorc) },
- { "rx_csum_offload_good", IGBVF_STAT(hw_csum_good, zero_base) },
- { "rx_csum_offload_errors", IGBVF_STAT(hw_csum_err, zero_base) },
- { "rx_header_split", IGBVF_STAT(rx_hdr_split, zero_base) },
- { "alloc_rx_buff_failed", IGBVF_STAT(alloc_rx_buff_failed, zero_base) },
-};
-
-#define IGBVF_GLOBAL_STATS_LEN ARRAY_SIZE(igbvf_gstrings_stats)
-
-static const char igbvf_gstrings_test[][ETH_GSTRING_LEN] = {
- "Link test (on/offline)"
-};
-
-#define IGBVF_TEST_LEN ARRAY_SIZE(igbvf_gstrings_test)
-
-static int igbvf_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 status;
-
- ecmd->supported = SUPPORTED_1000baseT_Full;
-
- ecmd->advertising = ADVERTISED_1000baseT_Full;
-
- ecmd->port = -1;
- ecmd->transceiver = XCVR_DUMMY1;
-
- status = er32(STATUS);
- if (status & E1000_STATUS_LU) {
- if (status & E1000_STATUS_SPEED_1000)
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- else if (status & E1000_STATUS_SPEED_100)
- ethtool_cmd_speed_set(ecmd, SPEED_100);
- else
- ethtool_cmd_speed_set(ecmd, SPEED_10);
-
- if (status & E1000_STATUS_FD)
- ecmd->duplex = DUPLEX_FULL;
- else
- ecmd->duplex = DUPLEX_HALF;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- ecmd->autoneg = AUTONEG_DISABLE;
-
- return 0;
-}
-
-static int igbvf_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- return -EOPNOTSUPP;
-}
-
-static void igbvf_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- return;
-}
-
-static int igbvf_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- return -EOPNOTSUPP;
-}
-
-static u32 igbvf_get_rx_csum(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- return !(adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED);
-}
-
-static int igbvf_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- if (data)
- adapter->flags &= ~IGBVF_FLAG_RX_CSUM_DISABLED;
- else
- adapter->flags |= IGBVF_FLAG_RX_CSUM_DISABLED;
-
- return 0;
-}
-
-static u32 igbvf_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_IP_CSUM) != 0;
-}
-
-static int igbvf_set_tx_csum(struct net_device *netdev, u32 data)
-{
- if (data)
- netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- else
- netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- return 0;
-}
-
-static int igbvf_set_tso(struct net_device *netdev, u32 data)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- if (data) {
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- } else {
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- }
-
- dev_info(&adapter->pdev->dev, "TSO is %s\n",
- data ? "Enabled" : "Disabled");
- return 0;
-}
-
-static u32 igbvf_get_msglevel(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void igbvf_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-static int igbvf_get_regs_len(struct net_device *netdev)
-{
-#define IGBVF_REGS_LEN 8
- return IGBVF_REGS_LEN * sizeof(u32);
-}
-
-static void igbvf_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
-
- memset(p, 0, IGBVF_REGS_LEN * sizeof(u32));
-
- regs->version = (1 << 24) | (adapter->pdev->revision << 16) |
- adapter->pdev->device;
-
- regs_buff[0] = er32(CTRL);
- regs_buff[1] = er32(STATUS);
-
- regs_buff[2] = er32(RDLEN(0));
- regs_buff[3] = er32(RDH(0));
- regs_buff[4] = er32(RDT(0));
-
- regs_buff[5] = er32(TDLEN(0));
- regs_buff[6] = er32(TDH(0));
- regs_buff[7] = er32(TDT(0));
-}
-
-static int igbvf_get_eeprom_len(struct net_device *netdev)
-{
- return 0;
-}
-
-static int igbvf_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- return -EOPNOTSUPP;
-}
-
-static int igbvf_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- return -EOPNOTSUPP;
-}
-
-static void igbvf_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32] = "N/A";
-
- strncpy(drvinfo->driver, igbvf_driver_name, 32);
- strncpy(drvinfo->version, igbvf_driver_version, 32);
- strncpy(drvinfo->fw_version, firmware_version, 32);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
- drvinfo->regdump_len = igbvf_get_regs_len(netdev);
- drvinfo->eedump_len = igbvf_get_eeprom_len(netdev);
-}
-
-static void igbvf_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct igbvf_ring *tx_ring = adapter->tx_ring;
- struct igbvf_ring *rx_ring = adapter->rx_ring;
-
- ring->rx_max_pending = IGBVF_MAX_RXD;
- ring->tx_max_pending = IGBVF_MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rx_ring->count;
- ring->tx_pending = tx_ring->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int igbvf_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct igbvf_ring *temp_ring;
- int err = 0;
- u32 new_rx_count, new_tx_count;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- new_rx_count = max(ring->rx_pending, (u32)IGBVF_MIN_RXD);
- new_rx_count = min(new_rx_count, (u32)IGBVF_MAX_RXD);
- new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
-
- new_tx_count = max(ring->tx_pending, (u32)IGBVF_MIN_TXD);
- new_tx_count = min(new_tx_count, (u32)IGBVF_MAX_TXD);
- new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if ((new_tx_count == adapter->tx_ring->count) &&
- (new_rx_count == adapter->rx_ring->count)) {
- /* nothing to do */
- return 0;
- }
-
- while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
- msleep(1);
-
- if (!netif_running(adapter->netdev)) {
- adapter->tx_ring->count = new_tx_count;
- adapter->rx_ring->count = new_rx_count;
- goto clear_reset;
- }
-
- temp_ring = vmalloc(sizeof(struct igbvf_ring));
- if (!temp_ring) {
- err = -ENOMEM;
- goto clear_reset;
- }
-
- igbvf_down(adapter);
-
- /*
- * We can't just free everything and then setup again,
- * because the ISRs in MSI-X mode get passed pointers
- * to the tx and rx ring structs.
- */
- if (new_tx_count != adapter->tx_ring->count) {
- memcpy(temp_ring, adapter->tx_ring, sizeof(struct igbvf_ring));
-
- temp_ring->count = new_tx_count;
- err = igbvf_setup_tx_resources(adapter, temp_ring);
- if (err)
- goto err_setup;
-
- igbvf_free_tx_resources(adapter->tx_ring);
-
- memcpy(adapter->tx_ring, temp_ring, sizeof(struct igbvf_ring));
- }
-
- if (new_rx_count != adapter->rx_ring->count) {
- memcpy(temp_ring, adapter->rx_ring, sizeof(struct igbvf_ring));
-
- temp_ring->count = new_rx_count;
- err = igbvf_setup_rx_resources(adapter, temp_ring);
- if (err)
- goto err_setup;
-
- igbvf_free_rx_resources(adapter->rx_ring);
-
- memcpy(adapter->rx_ring, temp_ring,sizeof(struct igbvf_ring));
- }
-err_setup:
- igbvf_up(adapter);
- vfree(temp_ring);
-clear_reset:
- clear_bit(__IGBVF_RESETTING, &adapter->state);
- return err;
-}
-
-static int igbvf_link_test(struct igbvf_adapter *adapter, u64 *data)
-{
- struct e1000_hw *hw = &adapter->hw;
- *data = 0;
-
- hw->mac.ops.check_for_link(hw);
-
- if (!(er32(STATUS) & E1000_STATUS_LU))
- *data = 1;
-
- return *data;
-}
-
-static void igbvf_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- set_bit(__IGBVF_TESTING, &adapter->state);
-
- /*
- * Link test performed before hardware reset so autoneg doesn't
- * interfere with test result
- */
- if (igbvf_link_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- clear_bit(__IGBVF_TESTING, &adapter->state);
- msleep_interruptible(4 * 1000);
-}
-
-static void igbvf_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- wol->supported = 0;
- wol->wolopts = 0;
-}
-
-static int igbvf_set_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- return -EOPNOTSUPP;
-}
-
-static int igbvf_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- if (adapter->itr_setting <= 3)
- ec->rx_coalesce_usecs = adapter->itr_setting;
- else
- ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
-
- return 0;
-}
-
-static int igbvf_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if ((ec->rx_coalesce_usecs > IGBVF_MAX_ITR_USECS) ||
- ((ec->rx_coalesce_usecs > 3) &&
- (ec->rx_coalesce_usecs < IGBVF_MIN_ITR_USECS)) ||
- (ec->rx_coalesce_usecs == 2))
- return -EINVAL;
-
- /* convert to rate of irq's per second */
- if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
- adapter->itr = IGBVF_START_ITR;
- adapter->itr_setting = ec->rx_coalesce_usecs;
- } else {
- adapter->itr = ec->rx_coalesce_usecs << 2;
- adapter->itr_setting = adapter->itr;
- }
-
- writel(adapter->itr,
- hw->hw_addr + adapter->rx_ring[0].itr_register);
-
- return 0;
-}
-
-static int igbvf_nway_reset(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- if (netif_running(netdev))
- igbvf_reinit_locked(adapter);
- return 0;
-}
-
-
-static void igbvf_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats,
- u64 *data)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- int i;
-
- igbvf_update_stats(adapter);
- for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
- char *p = (char *)adapter +
- igbvf_gstrings_stats[i].stat_offset;
- char *b = (char *)adapter +
- igbvf_gstrings_stats[i].base_stat_offset;
- data[i] = ((igbvf_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? (*(u64 *)p - *(u64 *)b) :
- (*(u32 *)p - *(u32 *)b));
- }
-
-}
-
-static int igbvf_get_sset_count(struct net_device *dev, int stringset)
-{
- switch(stringset) {
- case ETH_SS_TEST:
- return IGBVF_TEST_LEN;
- case ETH_SS_STATS:
- return IGBVF_GLOBAL_STATS_LEN;
- default:
- return -EINVAL;
- }
-}
-
-static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- u8 *p = data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *igbvf_gstrings_test, sizeof(igbvf_gstrings_test));
- break;
- case ETH_SS_STATS:
- for (i = 0; i < IGBVF_GLOBAL_STATS_LEN; i++) {
- memcpy(p, igbvf_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-static const struct ethtool_ops igbvf_ethtool_ops = {
- .get_settings = igbvf_get_settings,
- .set_settings = igbvf_set_settings,
- .get_drvinfo = igbvf_get_drvinfo,
- .get_regs_len = igbvf_get_regs_len,
- .get_regs = igbvf_get_regs,
- .get_wol = igbvf_get_wol,
- .set_wol = igbvf_set_wol,
- .get_msglevel = igbvf_get_msglevel,
- .set_msglevel = igbvf_set_msglevel,
- .nway_reset = igbvf_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = igbvf_get_eeprom_len,
- .get_eeprom = igbvf_get_eeprom,
- .set_eeprom = igbvf_set_eeprom,
- .get_ringparam = igbvf_get_ringparam,
- .set_ringparam = igbvf_set_ringparam,
- .get_pauseparam = igbvf_get_pauseparam,
- .set_pauseparam = igbvf_set_pauseparam,
- .get_rx_csum = igbvf_get_rx_csum,
- .set_rx_csum = igbvf_set_rx_csum,
- .get_tx_csum = igbvf_get_tx_csum,
- .set_tx_csum = igbvf_set_tx_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_tso = ethtool_op_get_tso,
- .set_tso = igbvf_set_tso,
- .self_test = igbvf_diag_test,
- .get_sset_count = igbvf_get_sset_count,
- .get_strings = igbvf_get_strings,
- .get_ethtool_stats = igbvf_get_ethtool_stats,
- .get_coalesce = igbvf_get_coalesce,
- .set_coalesce = igbvf_set_coalesce,
-};
-
-void igbvf_set_ethtool_ops(struct net_device *netdev)
-{
- /* have to "undeclare" const on this struct to remove warnings */
- SET_ETHTOOL_OPS(netdev, (struct ethtool_ops *)&igbvf_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* Linux PRO/1000 Ethernet Driver main header file */
-
-#ifndef _IGBVF_H_
-#define _IGBVF_H_
-
-#include <linux/types.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/netdevice.h>
-#include <linux/if_vlan.h>
-
-#include "vf.h"
-
-/* Forward declarations */
-struct igbvf_info;
-struct igbvf_adapter;
-
-/* Interrupt defines */
-#define IGBVF_START_ITR 648 /* ~6000 ints/sec */
-
-/* Interrupt modes, as used by the IntMode parameter */
-#define IGBVF_INT_MODE_LEGACY 0
-#define IGBVF_INT_MODE_MSI 1
-#define IGBVF_INT_MODE_MSIX 2
-
-/* Tx/Rx descriptor defines */
-#define IGBVF_DEFAULT_TXD 256
-#define IGBVF_MAX_TXD 4096
-#define IGBVF_MIN_TXD 80
-
-#define IGBVF_DEFAULT_RXD 256
-#define IGBVF_MAX_RXD 4096
-#define IGBVF_MIN_RXD 80
-
-#define IGBVF_MIN_ITR_USECS 10 /* 100000 irq/sec */
-#define IGBVF_MAX_ITR_USECS 10000 /* 100 irq/sec */
-
-/* RX descriptor control thresholds.
- * PTHRESH - MAC will consider prefetch if it has fewer than this number of
- * descriptors available in its onboard memory.
- * Setting this to 0 disables RX descriptor prefetch.
- * HTHRESH - MAC will only prefetch if there are at least this many descriptors
- * available in host memory.
- * If PTHRESH is 0, this should also be 0.
- * WTHRESH - RX descriptor writeback threshold - MAC will delay writing back
- * descriptors until either it has this many to write back, or the
- * ITR timer expires.
- */
-#define IGBVF_RX_PTHRESH 16
-#define IGBVF_RX_HTHRESH 8
-#define IGBVF_RX_WTHRESH 1
-
-/* this is the size past which hardware will drop packets when setting LPE=0 */
-#define MAXIMUM_ETHERNET_VLAN_SIZE 1522
-
-#define IGBVF_FC_PAUSE_TIME 0x0680 /* 858 usec */
-
-/* How many Tx Descriptors do we need to call netif_wake_queue ? */
-#define IGBVF_TX_QUEUE_WAKE 32
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IGBVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define AUTO_ALL_MODES 0
-#define IGBVF_EEPROM_APME 0x0400
-
-#define IGBVF_MNG_VLAN_NONE (-1)
-
-/* Number of packet split data buffers (not including the header buffer) */
-#define PS_PAGE_BUFFERS (MAX_PS_BUFFERS - 1)
-
-enum igbvf_boards {
- board_vf,
- board_i350_vf,
-};
-
-struct igbvf_queue_stats {
- u64 packets;
- u64 bytes;
-};
-
-/*
- * wrappers around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer
- */
-struct igbvf_buffer {
- dma_addr_t dma;
- struct sk_buff *skb;
- union {
- /* Tx */
- struct {
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- u16 mapped_as_page;
- };
- /* Rx */
- struct {
- struct page *page;
- u64 page_dma;
- unsigned int page_offset;
- };
- };
-};
-
-union igbvf_desc {
- union e1000_adv_rx_desc rx_desc;
- union e1000_adv_tx_desc tx_desc;
- struct e1000_adv_tx_context_desc tx_context_desc;
-};
-
-struct igbvf_ring {
- struct igbvf_adapter *adapter; /* backlink */
- union igbvf_desc *desc; /* pointer to ring memory */
- dma_addr_t dma; /* phys address of ring */
- unsigned int size; /* length of ring in bytes */
- unsigned int count; /* number of desc. in ring */
-
- u16 next_to_use;
- u16 next_to_clean;
-
- u16 head;
- u16 tail;
-
- /* array of buffer information structs */
- struct igbvf_buffer *buffer_info;
- struct napi_struct napi;
-
- char name[IFNAMSIZ + 5];
- u32 eims_value;
- u32 itr_val;
- u16 itr_register;
- int set_itr;
-
- struct sk_buff *rx_skb_top;
-
- struct igbvf_queue_stats stats;
-};
-
-/* board specific private data structure */
-struct igbvf_adapter {
- struct timer_list watchdog_timer;
- struct timer_list blink_timer;
-
- struct work_struct reset_task;
- struct work_struct watchdog_task;
-
- const struct igbvf_info *ei;
-
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u32 bd_number;
- u32 rx_buffer_len;
- u32 polling_interval;
- u16 mng_vlan_id;
- u16 link_speed;
- u16 link_duplex;
-
- spinlock_t tx_queue_lock; /* prevent concurrent tail updates */
-
- /* track device up/down/testing state */
- unsigned long state;
-
- /* Interrupt Throttle Rate */
- u32 itr;
- u32 itr_setting;
- u16 tx_itr;
- u16 rx_itr;
-
- /*
- * Tx
- */
- struct igbvf_ring *tx_ring /* One per active queue */
- ____cacheline_aligned_in_smp;
-
- unsigned int restart_queue;
- u32 txd_cmd;
-
- u32 tx_int_delay;
- u32 tx_abs_int_delay;
-
- unsigned int total_tx_bytes;
- unsigned int total_tx_packets;
- unsigned int total_rx_bytes;
- unsigned int total_rx_packets;
-
- /* Tx stats */
- u32 tx_timeout_count;
- u32 tx_fifo_head;
- u32 tx_head_addr;
- u32 tx_fifo_size;
- u32 tx_dma_failed;
-
- /*
- * Rx
- */
- struct igbvf_ring *rx_ring;
-
- u32 rx_int_delay;
- u32 rx_abs_int_delay;
-
- /* Rx stats */
- u64 hw_csum_err;
- u64 hw_csum_good;
- u64 rx_hdr_split;
- u32 alloc_rx_buff_failed;
- u32 rx_dma_failed;
-
- unsigned int rx_ps_hdr_size;
- u32 max_frame_size;
- u32 min_frame_size;
-
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
- struct net_device_stats net_stats;
- spinlock_t stats_lock; /* prevent concurrent stats updates */
-
- /* structs defined in e1000_hw.h */
- struct e1000_hw hw;
-
- /* The VF counters don't clear on read so we have to get a base
- * count on driver start up and always subtract that base on
- * on the first update, thus the flag..
- */
- struct e1000_vf_stats stats;
- u64 zero_base;
-
- struct igbvf_ring test_tx_ring;
- struct igbvf_ring test_rx_ring;
- u32 test_icr;
-
- u32 msg_enable;
- struct msix_entry *msix_entries;
- int int_mode;
- u32 eims_enable_mask;
- u32 eims_other;
- u32 int_counter0;
- u32 int_counter1;
-
- u32 eeprom_wol;
- u32 wol;
- u32 pba;
-
- bool fc_autoneg;
-
- unsigned long led_status;
-
- unsigned int flags;
- unsigned long last_reset;
-};
-
-struct igbvf_info {
- enum e1000_mac_type mac;
- unsigned int flags;
- u32 pba;
- void (*init_ops)(struct e1000_hw *);
- s32 (*get_variants)(struct igbvf_adapter *);
-};
-
-/* hardware capability, feature, and workaround flags */
-#define IGBVF_FLAG_RX_CSUM_DISABLED (1 << 0)
-
-#define IGBVF_RX_DESC_ADV(R, i) \
- (&((((R).desc))[i].rx_desc))
-#define IGBVF_TX_DESC_ADV(R, i) \
- (&((((R).desc))[i].tx_desc))
-#define IGBVF_TX_CTXTDESC_ADV(R, i) \
- (&((((R).desc))[i].tx_context_desc))
-
-enum igbvf_state_t {
- __IGBVF_TESTING,
- __IGBVF_RESETTING,
- __IGBVF_DOWN
-};
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-extern char igbvf_driver_name[];
-extern const char igbvf_driver_version[];
-
-extern void igbvf_check_options(struct igbvf_adapter *);
-extern void igbvf_set_ethtool_ops(struct net_device *);
-
-extern int igbvf_up(struct igbvf_adapter *);
-extern void igbvf_down(struct igbvf_adapter *);
-extern void igbvf_reinit_locked(struct igbvf_adapter *);
-extern int igbvf_setup_rx_resources(struct igbvf_adapter *, struct igbvf_ring *);
-extern int igbvf_setup_tx_resources(struct igbvf_adapter *, struct igbvf_ring *);
-extern void igbvf_free_rx_resources(struct igbvf_ring *);
-extern void igbvf_free_tx_resources(struct igbvf_ring *);
-extern void igbvf_update_stats(struct igbvf_adapter *);
-
-extern unsigned int copybreak;
-
-#endif /* _IGBVF_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "mbx.h"
-
-/**
- * e1000_poll_for_msg - Wait for message notification
- * @hw: pointer to the HW structure
- *
- * returns SUCCESS if it successfully received a message notification
- **/
-static s32 e1000_poll_for_msg(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!mbx->ops.check_for_msg)
- goto out;
-
- while (countdown && mbx->ops.check_for_msg(hw)) {
- countdown--;
- udelay(mbx->usec_delay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-out:
- return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
-}
-
-/**
- * e1000_poll_for_ack - Wait for message acknowledgement
- * @hw: pointer to the HW structure
- *
- * returns SUCCESS if it successfully received a message acknowledgement
- **/
-static s32 e1000_poll_for_ack(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!mbx->ops.check_for_ack)
- goto out;
-
- while (countdown && mbx->ops.check_for_ack(hw)) {
- countdown--;
- udelay(mbx->usec_delay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-out:
- return countdown ? E1000_SUCCESS : -E1000_ERR_MBX;
-}
-
-/**
- * e1000_read_posted_mbx - Wait for message notification and receive message
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns SUCCESS if it successfully received a message notification and
- * copied it into the receive buffer.
- **/
-static s32 e1000_read_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!mbx->ops.read)
- goto out;
-
- ret_val = e1000_poll_for_msg(hw);
-
- /* if ack received read message, otherwise we timed out */
- if (!ret_val)
- ret_val = mbx->ops.read(hw, msg, size);
-out:
- return ret_val;
-}
-
-/**
- * e1000_write_posted_mbx - Write a message to the mailbox, wait for ack
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns SUCCESS if it successfully copied message into the buffer and
- * received an ack to that message within delay * timeout period
- **/
-static s32 e1000_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- s32 ret_val = -E1000_ERR_MBX;
-
- /* exit if we either can't write or there isn't a defined timeout */
- if (!mbx->ops.write || !mbx->timeout)
- goto out;
-
- /* send msg*/
- ret_val = mbx->ops.write(hw, msg, size);
-
- /* if msg sent wait until we receive an ack */
- if (!ret_val)
- ret_val = e1000_poll_for_ack(hw);
-out:
- return ret_val;
-}
-
-/**
- * e1000_read_v2p_mailbox - read v2p mailbox
- * @hw: pointer to the HW structure
- *
- * This function is used to read the v2p mailbox without losing the read to
- * clear status bits.
- **/
-static u32 e1000_read_v2p_mailbox(struct e1000_hw *hw)
-{
- u32 v2p_mailbox = er32(V2PMAILBOX(0));
-
- v2p_mailbox |= hw->dev_spec.vf.v2p_mailbox;
- hw->dev_spec.vf.v2p_mailbox |= v2p_mailbox & E1000_V2PMAILBOX_R2C_BITS;
-
- return v2p_mailbox;
-}
-
-/**
- * e1000_check_for_bit_vf - Determine if a status bit was set
- * @hw: pointer to the HW structure
- * @mask: bitmask for bits to be tested and cleared
- *
- * This function is used to check for the read to clear bits within
- * the V2P mailbox.
- **/
-static s32 e1000_check_for_bit_vf(struct e1000_hw *hw, u32 mask)
-{
- u32 v2p_mailbox = e1000_read_v2p_mailbox(hw);
- s32 ret_val = -E1000_ERR_MBX;
-
- if (v2p_mailbox & mask)
- ret_val = E1000_SUCCESS;
-
- hw->dev_spec.vf.v2p_mailbox &= ~mask;
-
- return ret_val;
-}
-
-/**
- * e1000_check_for_msg_vf - checks to see if the PF has sent mail
- * @hw: pointer to the HW structure
- *
- * returns SUCCESS if the PF has set the Status bit or else ERR_MBX
- **/
-static s32 e1000_check_for_msg_vf(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFSTS)) {
- ret_val = E1000_SUCCESS;
- hw->mbx.stats.reqs++;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_check_for_ack_vf - checks to see if the PF has ACK'd
- * @hw: pointer to the HW structure
- *
- * returns SUCCESS if the PF has set the ACK bit or else ERR_MBX
- **/
-static s32 e1000_check_for_ack_vf(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!e1000_check_for_bit_vf(hw, E1000_V2PMAILBOX_PFACK)) {
- ret_val = E1000_SUCCESS;
- hw->mbx.stats.acks++;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_check_for_rst_vf - checks to see if the PF has reset
- * @hw: pointer to the HW structure
- *
- * returns true if the PF has set the reset done bit or else false
- **/
-static s32 e1000_check_for_rst_vf(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD |
- E1000_V2PMAILBOX_RSTI))) {
- ret_val = E1000_SUCCESS;
- hw->mbx.stats.rsts++;
- }
-
- return ret_val;
-}
-
-/**
- * e1000_obtain_mbx_lock_vf - obtain mailbox lock
- * @hw: pointer to the HW structure
- *
- * return SUCCESS if we obtained the mailbox lock
- **/
-static s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw)
-{
- s32 ret_val = -E1000_ERR_MBX;
-
- /* Take ownership of the buffer */
- ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_VFU);
-
- /* reserve mailbox for vf use */
- if (e1000_read_v2p_mailbox(hw) & E1000_V2PMAILBOX_VFU)
- ret_val = E1000_SUCCESS;
-
- return ret_val;
-}
-
-/**
- * e1000_write_mbx_vf - Write a message to the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns SUCCESS if it successfully copied message into the buffer
- **/
-static s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
-{
- s32 err;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- err = e1000_obtain_mbx_lock_vf(hw);
- if (err)
- goto out_no_write;
-
- /* flush any ack or msg as we are going to overwrite mailbox */
- e1000_check_for_ack_vf(hw);
- e1000_check_for_msg_vf(hw);
-
- /* copy the caller specified message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- array_ew32(VMBMEM(0), i, msg[i]);
-
- /* update stats */
- hw->mbx.stats.msgs_tx++;
-
- /* Drop VFU and interrupt the PF to tell it a message has been sent */
- ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_REQ);
-
-out_no_write:
- return err;
-}
-
-/**
- * e1000_read_mbx_vf - Reads a message from the inbox intended for vf
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns SUCCESS if it successfuly read message from buffer
- **/
-static s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size)
-{
- s32 err;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- err = e1000_obtain_mbx_lock_vf(hw);
- if (err)
- goto out_no_read;
-
- /* copy the message from the mailbox memory buffer */
- for (i = 0; i < size; i++)
- msg[i] = array_er32(VMBMEM(0), i);
-
- /* Acknowledge receipt and release mailbox, then we're done */
- ew32(V2PMAILBOX(0), E1000_V2PMAILBOX_ACK);
-
- /* update stats */
- hw->mbx.stats.msgs_rx++;
-
-out_no_read:
- return err;
-}
-
-/**
- * e1000_init_mbx_params_vf - set initial values for vf mailbox
- * @hw: pointer to the HW structure
- *
- * Initializes the hw->mbx struct to correct values for vf mailbox
- */
-s32 e1000_init_mbx_params_vf(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
-
- /* start mailbox as timed out and let the reset_hw call set the timeout
- * value to being communications */
- mbx->timeout = 0;
- mbx->usec_delay = E1000_VF_MBX_INIT_DELAY;
-
- mbx->size = E1000_VFMAILBOX_SIZE;
-
- mbx->ops.read = e1000_read_mbx_vf;
- mbx->ops.write = e1000_write_mbx_vf;
- mbx->ops.read_posted = e1000_read_posted_mbx;
- mbx->ops.write_posted = e1000_write_posted_mbx;
- mbx->ops.check_for_msg = e1000_check_for_msg_vf;
- mbx->ops.check_for_ack = e1000_check_for_ack_vf;
- mbx->ops.check_for_rst = e1000_check_for_rst_vf;
-
- mbx->stats.msgs_tx = 0;
- mbx->stats.msgs_rx = 0;
- mbx->stats.reqs = 0;
- mbx->stats.acks = 0;
- mbx->stats.rsts = 0;
-
- return E1000_SUCCESS;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_MBX_H_
-#define _E1000_MBX_H_
-
-#include "vf.h"
-
-#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
-#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */
-#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
-#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
-#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */
-#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
-#define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
-
-#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
-
-/* If it's a E1000_VF_* msg then it originates in the VF and is sent to the
- * PF. The reverse is true if it is E1000_PF_*.
- * Message ACK's are the value or'd with 0xF0000000
- */
-#define E1000_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
- * this are the ACK */
-#define E1000_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
- * this are the NACK */
-#define E1000_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
- clear to send requests */
-
-/* We have a total wait time of 1s for vf mailbox posted messages */
-#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* retry count for mailbox timeout */
-#define E1000_VF_MBX_INIT_DELAY 500 /* usec delay between retries */
-
-#define E1000_VT_MSGINFO_SHIFT 16
-/* bits 23:16 are used for exra info for certain messages */
-#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT)
-
-#define E1000_VF_RESET 0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
-#define E1000_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
-#define E1000_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
-#define E1000_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
-
-#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */
-
-void e1000_init_mbx_ops_generic(struct e1000_hw *hw);
-s32 e1000_init_mbx_params_vf(struct e1000_hw *);
-
-#endif /* _E1000_MBX_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/pagemap.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/tcp.h>
-#include <linux/ipv6.h>
-#include <linux/slab.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-#include <linux/prefetch.h>
-
-#include "igbvf.h"
-
-#define DRV_VERSION "2.0.0-k"
-char igbvf_driver_name[] = "igbvf";
-const char igbvf_driver_version[] = DRV_VERSION;
-static const char igbvf_driver_string[] =
- "Intel(R) Virtual Function Network Driver";
-static const char igbvf_copyright[] =
- "Copyright (c) 2009 - 2010 Intel Corporation.";
-
-static int igbvf_poll(struct napi_struct *napi, int budget);
-static void igbvf_reset(struct igbvf_adapter *);
-static void igbvf_set_interrupt_capability(struct igbvf_adapter *);
-static void igbvf_reset_interrupt_capability(struct igbvf_adapter *);
-
-static struct igbvf_info igbvf_vf_info = {
- .mac = e1000_vfadapt,
- .flags = 0,
- .pba = 10,
- .init_ops = e1000_init_function_pointers_vf,
-};
-
-static struct igbvf_info igbvf_i350_vf_info = {
- .mac = e1000_vfadapt_i350,
- .flags = 0,
- .pba = 10,
- .init_ops = e1000_init_function_pointers_vf,
-};
-
-static const struct igbvf_info *igbvf_info_tbl[] = {
- [board_vf] = &igbvf_vf_info,
- [board_i350_vf] = &igbvf_i350_vf_info,
-};
-
-/**
- * igbvf_desc_unused - calculate if we have unused descriptors
- **/
-static int igbvf_desc_unused(struct igbvf_ring *ring)
-{
- if (ring->next_to_clean > ring->next_to_use)
- return ring->next_to_clean - ring->next_to_use - 1;
-
- return ring->count + ring->next_to_clean - ring->next_to_use - 1;
-}
-
-/**
- * igbvf_receive_skb - helper function to handle Rx indications
- * @adapter: board private structure
- * @status: descriptor status field as written by hardware
- * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
- * @skb: pointer to sk_buff to be indicated to stack
- **/
-static void igbvf_receive_skb(struct igbvf_adapter *adapter,
- struct net_device *netdev,
- struct sk_buff *skb,
- u32 status, u16 vlan)
-{
- if (status & E1000_RXD_STAT_VP) {
- u16 vid = le16_to_cpu(vlan) & E1000_RXD_SPC_VLAN_MASK;
-
- __vlan_hwaccel_put_tag(skb, vid);
- }
- netif_receive_skb(skb);
-}
-
-static inline void igbvf_rx_checksum_adv(struct igbvf_adapter *adapter,
- u32 status_err, struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- /* Ignore Checksum bit is set or checksum is disabled through ethtool */
- if ((status_err & E1000_RXD_STAT_IXSM) ||
- (adapter->flags & IGBVF_FLAG_RX_CSUM_DISABLED))
- return;
-
- /* TCP/UDP checksum error bit is set */
- if (status_err &
- (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
- /* let the stack verify checksum errors */
- adapter->hw_csum_err++;
- return;
- }
-
- /* It must be a TCP or UDP packet with a valid checksum */
- if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- adapter->hw_csum_good++;
-}
-
-/**
- * igbvf_alloc_rx_buffers - Replace used receive buffers; packet split
- * @rx_ring: address of ring structure to repopulate
- * @cleaned_count: number of buffers to repopulate
- **/
-static void igbvf_alloc_rx_buffers(struct igbvf_ring *rx_ring,
- int cleaned_count)
-{
- struct igbvf_adapter *adapter = rx_ring->adapter;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- union e1000_adv_rx_desc *rx_desc;
- struct igbvf_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- int bufsz;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
-
- if (adapter->rx_ps_hdr_size)
- bufsz = adapter->rx_ps_hdr_size;
- else
- bufsz = adapter->rx_buffer_len;
-
- while (cleaned_count--) {
- rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
-
- if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
- if (!buffer_info->page) {
- buffer_info->page = alloc_page(GFP_ATOMIC);
- if (!buffer_info->page) {
- adapter->alloc_rx_buff_failed++;
- goto no_buffers;
- }
- buffer_info->page_offset = 0;
- } else {
- buffer_info->page_offset ^= PAGE_SIZE / 2;
- }
- buffer_info->page_dma =
- dma_map_page(&pdev->dev, buffer_info->page,
- buffer_info->page_offset,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- }
-
- if (!buffer_info->skb) {
- skb = netdev_alloc_skb_ip_align(netdev, bufsz);
- if (!skb) {
- adapter->alloc_rx_buff_failed++;
- goto no_buffers;
- }
-
- buffer_info->skb = skb;
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data,
- bufsz,
- DMA_FROM_DEVICE);
- }
- /* Refresh the desc even if buffer_addrs didn't change because
- * each write-back erases this info. */
- if (adapter->rx_ps_hdr_size) {
- rx_desc->read.pkt_addr =
- cpu_to_le64(buffer_info->page_dma);
- rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
- } else {
- rx_desc->read.pkt_addr =
- cpu_to_le64(buffer_info->dma);
- rx_desc->read.hdr_addr = 0;
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
-no_buffers:
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- if (i == 0)
- i = (rx_ring->count - 1);
- else
- i--;
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
- writel(i, adapter->hw.hw_addr + rx_ring->tail);
- }
-}
-
-/**
- * igbvf_clean_rx_irq - Send received data up the network stack; legacy
- * @adapter: board private structure
- *
- * the return value indicates whether actual cleaning was done, there
- * is no guarantee that everything was cleaned
- **/
-static bool igbvf_clean_rx_irq(struct igbvf_adapter *adapter,
- int *work_done, int work_to_do)
-{
- struct igbvf_ring *rx_ring = adapter->rx_ring;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- union e1000_adv_rx_desc *rx_desc, *next_rxd;
- struct igbvf_buffer *buffer_info, *next_buffer;
- struct sk_buff *skb;
- bool cleaned = false;
- int cleaned_count = 0;
- unsigned int total_bytes = 0, total_packets = 0;
- unsigned int i;
- u32 length, hlen, staterr;
-
- i = rx_ring->next_to_clean;
- rx_desc = IGBVF_RX_DESC_ADV(*rx_ring, i);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-
- while (staterr & E1000_RXD_STAT_DD) {
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- buffer_info = &rx_ring->buffer_info[i];
-
- /* HW will not DMA in data larger than the given buffer, even
- * if it parses the (NFS, of course) header to be larger. In
- * that case, it fills the header buffer and spills the rest
- * into the page.
- */
- hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info) &
- E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
- if (hlen > adapter->rx_ps_hdr_size)
- hlen = adapter->rx_ps_hdr_size;
-
- length = le16_to_cpu(rx_desc->wb.upper.length);
- cleaned = true;
- cleaned_count++;
-
- skb = buffer_info->skb;
- prefetch(skb->data - NET_IP_ALIGN);
- buffer_info->skb = NULL;
- if (!adapter->rx_ps_hdr_size) {
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- skb_put(skb, length);
- goto send_up;
- }
-
- if (!skb_shinfo(skb)->nr_frags) {
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_hdr_size,
- DMA_FROM_DEVICE);
- skb_put(skb, hlen);
- }
-
- if (length) {
- dma_unmap_page(&pdev->dev, buffer_info->page_dma,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- buffer_info->page_dma = 0;
-
- skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
- buffer_info->page,
- buffer_info->page_offset,
- length);
-
- if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
- (page_count(buffer_info->page) != 1))
- buffer_info->page = NULL;
- else
- get_page(buffer_info->page);
-
- skb->len += length;
- skb->data_len += length;
- skb->truesize += length;
- }
-send_up:
- i++;
- if (i == rx_ring->count)
- i = 0;
- next_rxd = IGBVF_RX_DESC_ADV(*rx_ring, i);
- prefetch(next_rxd);
- next_buffer = &rx_ring->buffer_info[i];
-
- if (!(staterr & E1000_RXD_STAT_EOP)) {
- buffer_info->skb = next_buffer->skb;
- buffer_info->dma = next_buffer->dma;
- next_buffer->skb = skb;
- next_buffer->dma = 0;
- goto next_desc;
- }
-
- if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- total_bytes += skb->len;
- total_packets++;
-
- igbvf_rx_checksum_adv(adapter, staterr, skb);
-
- skb->protocol = eth_type_trans(skb, netdev);
-
- igbvf_receive_skb(adapter, netdev, skb, staterr,
- rx_desc->wb.upper.vlan);
-
-next_desc:
- rx_desc->wb.upper.status_error = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= IGBVF_RX_BUFFER_WRITE) {
- igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
-
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- rx_ring->next_to_clean = i;
- cleaned_count = igbvf_desc_unused(rx_ring);
-
- if (cleaned_count)
- igbvf_alloc_rx_buffers(rx_ring, cleaned_count);
-
- adapter->total_rx_packets += total_packets;
- adapter->total_rx_bytes += total_bytes;
- adapter->net_stats.rx_bytes += total_bytes;
- adapter->net_stats.rx_packets += total_packets;
- return cleaned;
-}
-
-static void igbvf_put_txbuf(struct igbvf_adapter *adapter,
- struct igbvf_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
-}
-
-/**
- * igbvf_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-int igbvf_setup_tx_resources(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct igbvf_buffer) * tx_ring->count;
- tx_ring->buffer_info = vzalloc(size);
- if (!tx_ring->buffer_info)
- goto err;
-
- /* round up to nearest 4K */
- tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
-
- tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
- &tx_ring->dma, GFP_KERNEL);
-
- if (!tx_ring->desc)
- goto err;
-
- tx_ring->adapter = adapter;
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- return 0;
-err:
- vfree(tx_ring->buffer_info);
- dev_err(&adapter->pdev->dev,
- "Unable to allocate memory for the transmit descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * igbvf_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- *
- * Returns 0 on success, negative on failure
- **/
-int igbvf_setup_rx_resources(struct igbvf_adapter *adapter,
- struct igbvf_ring *rx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size, desc_len;
-
- size = sizeof(struct igbvf_buffer) * rx_ring->count;
- rx_ring->buffer_info = vzalloc(size);
- if (!rx_ring->buffer_info)
- goto err;
-
- desc_len = sizeof(union e1000_adv_rx_desc);
-
- /* Round up to nearest 4K */
- rx_ring->size = rx_ring->count * desc_len;
- rx_ring->size = ALIGN(rx_ring->size, 4096);
-
- rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
- &rx_ring->dma, GFP_KERNEL);
-
- if (!rx_ring->desc)
- goto err;
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- rx_ring->adapter = adapter;
-
- return 0;
-
-err:
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
- dev_err(&adapter->pdev->dev,
- "Unable to allocate memory for the receive descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * igbvf_clean_tx_ring - Free Tx Buffers
- * @tx_ring: ring to be cleaned
- **/
-static void igbvf_clean_tx_ring(struct igbvf_ring *tx_ring)
-{
- struct igbvf_adapter *adapter = tx_ring->adapter;
- struct igbvf_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- if (!tx_ring->buffer_info)
- return;
-
- /* Free all the Tx ring sk_buffs */
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- igbvf_put_txbuf(adapter, buffer_info);
- }
-
- size = sizeof(struct igbvf_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- writel(0, adapter->hw.hw_addr + tx_ring->head);
- writel(0, adapter->hw.hw_addr + tx_ring->tail);
-}
-
-/**
- * igbvf_free_tx_resources - Free Tx Resources per Queue
- * @tx_ring: ring to free resources from
- *
- * Free all transmit software resources
- **/
-void igbvf_free_tx_resources(struct igbvf_ring *tx_ring)
-{
- struct pci_dev *pdev = tx_ring->adapter->pdev;
-
- igbvf_clean_tx_ring(tx_ring);
-
- vfree(tx_ring->buffer_info);
- tx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
-
- tx_ring->desc = NULL;
-}
-
-/**
- * igbvf_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
- **/
-static void igbvf_clean_rx_ring(struct igbvf_ring *rx_ring)
-{
- struct igbvf_adapter *adapter = rx_ring->adapter;
- struct igbvf_buffer *buffer_info;
- struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
- unsigned int i;
-
- if (!rx_ring->buffer_info)
- return;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- if (adapter->rx_ps_hdr_size){
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_ps_hdr_size,
- DMA_FROM_DEVICE);
- } else {
- dma_unmap_single(&pdev->dev, buffer_info->dma,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
- }
- buffer_info->dma = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
-
- if (buffer_info->page) {
- if (buffer_info->page_dma)
- dma_unmap_page(&pdev->dev,
- buffer_info->page_dma,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- put_page(buffer_info->page);
- buffer_info->page = NULL;
- buffer_info->page_dma = 0;
- buffer_info->page_offset = 0;
- }
- }
-
- size = sizeof(struct igbvf_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- writel(0, adapter->hw.hw_addr + rx_ring->head);
- writel(0, adapter->hw.hw_addr + rx_ring->tail);
-}
-
-/**
- * igbvf_free_rx_resources - Free Rx Resources
- * @rx_ring: ring to clean the resources from
- *
- * Free all receive software resources
- **/
-
-void igbvf_free_rx_resources(struct igbvf_ring *rx_ring)
-{
- struct pci_dev *pdev = rx_ring->adapter->pdev;
-
- igbvf_clean_rx_ring(rx_ring);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
- rx_ring->desc = NULL;
-}
-
-/**
- * igbvf_update_itr - update the dynamic ITR value based on statistics
- * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput. This functionality is controlled
- * by the InterruptThrottleRate module parameter.
- **/
-static unsigned int igbvf_update_itr(struct igbvf_adapter *adapter,
- u16 itr_setting, int packets,
- int bytes)
-{
- unsigned int retval = itr_setting;
-
- if (packets == 0)
- goto update_itr_done;
-
- switch (itr_setting) {
- case lowest_latency:
- /* handle TSO and jumbo frames */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 5) && (bytes > 512))
- retval = low_latency;
- break;
- case low_latency: /* 50 usec aka 20000 ints/s */
- if (bytes > 10000) {
- /* this if handles the TSO accounting */
- if (bytes/packets > 8000)
- retval = bulk_latency;
- else if ((packets < 10) || ((bytes/packets) > 1200))
- retval = bulk_latency;
- else if ((packets > 35))
- retval = lowest_latency;
- } else if (bytes/packets > 2000) {
- retval = bulk_latency;
- } else if (packets <= 2 && bytes < 512) {
- retval = lowest_latency;
- }
- break;
- case bulk_latency: /* 250 usec aka 4000 ints/s */
- if (bytes > 25000) {
- if (packets > 35)
- retval = low_latency;
- } else if (bytes < 6000) {
- retval = low_latency;
- }
- break;
- }
-
-update_itr_done:
- return retval;
-}
-
-static void igbvf_set_itr(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u16 current_itr;
- u32 new_itr = adapter->itr;
-
- adapter->tx_itr = igbvf_update_itr(adapter, adapter->tx_itr,
- adapter->total_tx_packets,
- adapter->total_tx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->tx_itr == lowest_latency)
- adapter->tx_itr = low_latency;
-
- adapter->rx_itr = igbvf_update_itr(adapter, adapter->rx_itr,
- adapter->total_rx_packets,
- adapter->total_rx_bytes);
- /* conservative mode (itr 3) eliminates the lowest_latency setting */
- if (adapter->itr_setting == 3 && adapter->rx_itr == lowest_latency)
- adapter->rx_itr = low_latency;
-
- current_itr = max(adapter->rx_itr, adapter->tx_itr);
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 70000;
- break;
- case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
- break;
- case bulk_latency:
- new_itr = 4000;
- break;
- default:
- break;
- }
-
- if (new_itr != adapter->itr) {
- /*
- * this attempts to bias the interrupt rate towards Bulk
- * by adding intermediate steps when interrupt rate is
- * increasing
- */
- new_itr = new_itr > adapter->itr ?
- min(adapter->itr + (new_itr >> 2), new_itr) :
- new_itr;
- adapter->itr = new_itr;
- adapter->rx_ring->itr_val = 1952;
-
- if (adapter->msix_entries)
- adapter->rx_ring->set_itr = 1;
- else
- ew32(ITR, 1952);
- }
-}
-
-/**
- * igbvf_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- * returns true if ring is completely cleaned
- **/
-static bool igbvf_clean_tx_irq(struct igbvf_ring *tx_ring)
-{
- struct igbvf_adapter *adapter = tx_ring->adapter;
- struct net_device *netdev = adapter->netdev;
- struct igbvf_buffer *buffer_info;
- struct sk_buff *skb;
- union e1000_adv_tx_desc *tx_desc, *eop_desc;
- unsigned int total_bytes = 0, total_packets = 0;
- unsigned int i, eop, count = 0;
- bool cleaned = false;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
-
- while ((eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)) &&
- (count < tx_ring->count)) {
- rmb(); /* read buffer_info after eop_desc status */
- for (cleaned = false; !cleaned; count++) {
- tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
- cleaned = (i == eop);
- skb = buffer_info->skb;
-
- if (skb) {
- unsigned int segs, bytecount;
-
- /* gso_segs is currently only valid for tcp */
- segs = skb_shinfo(skb)->gso_segs ?: 1;
- /* multiply data chunks by size of headers */
- bytecount = ((segs - 1) * skb_headlen(skb)) +
- skb->len;
- total_packets += segs;
- total_bytes += bytecount;
- }
-
- igbvf_put_txbuf(adapter, buffer_info);
- tx_desc->wb.status = 0;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IGBVF_TX_DESC_ADV(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
- if (unlikely(count &&
- netif_carrier_ok(netdev) &&
- igbvf_desc_unused(tx_ring) >= IGBVF_TX_QUEUE_WAKE)) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
- if (netif_queue_stopped(netdev) &&
- !(test_bit(__IGBVF_DOWN, &adapter->state))) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
- }
-
- adapter->net_stats.tx_bytes += total_bytes;
- adapter->net_stats.tx_packets += total_packets;
- return count < tx_ring->count;
-}
-
-static irqreturn_t igbvf_msix_other(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->int_counter1++;
-
- netif_carrier_off(netdev);
- hw->mac.get_link_status = 1;
- if (!test_bit(__IGBVF_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
-
- ew32(EIMS, adapter->eims_other);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t igbvf_intr_msix_tx(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct igbvf_ring *tx_ring = adapter->tx_ring;
-
-
- adapter->total_tx_bytes = 0;
- adapter->total_tx_packets = 0;
-
- /* auto mask will automatically reenable the interrupt when we write
- * EICS */
- if (!igbvf_clean_tx_irq(tx_ring))
- /* Ring was not completely cleaned, so fire another interrupt */
- ew32(EICS, tx_ring->eims_value);
- else
- ew32(EIMS, tx_ring->eims_value);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t igbvf_intr_msix_rx(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- adapter->int_counter0++;
-
- /* Write the ITR value calculated at the end of the
- * previous interrupt.
- */
- if (adapter->rx_ring->set_itr) {
- writel(adapter->rx_ring->itr_val,
- adapter->hw.hw_addr + adapter->rx_ring->itr_register);
- adapter->rx_ring->set_itr = 0;
- }
-
- if (napi_schedule_prep(&adapter->rx_ring->napi)) {
- adapter->total_rx_bytes = 0;
- adapter->total_rx_packets = 0;
- __napi_schedule(&adapter->rx_ring->napi);
- }
-
- return IRQ_HANDLED;
-}
-
-#define IGBVF_NO_QUEUE -1
-
-static void igbvf_assign_vector(struct igbvf_adapter *adapter, int rx_queue,
- int tx_queue, int msix_vector)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 ivar, index;
-
- /* 82576 uses a table-based method for assigning vectors.
- Each queue has a single entry in the table to which we write
- a vector number along with a "valid" bit. Sadly, the layout
- of the table is somewhat counterintuitive. */
- if (rx_queue > IGBVF_NO_QUEUE) {
- index = (rx_queue >> 1);
- ivar = array_er32(IVAR0, index);
- if (rx_queue & 0x1) {
- /* vector goes into third byte of register */
- ivar = ivar & 0xFF00FFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
- } else {
- /* vector goes into low byte of register */
- ivar = ivar & 0xFFFFFF00;
- ivar |= msix_vector | E1000_IVAR_VALID;
- }
- adapter->rx_ring[rx_queue].eims_value = 1 << msix_vector;
- array_ew32(IVAR0, index, ivar);
- }
- if (tx_queue > IGBVF_NO_QUEUE) {
- index = (tx_queue >> 1);
- ivar = array_er32(IVAR0, index);
- if (tx_queue & 0x1) {
- /* vector goes into high byte of register */
- ivar = ivar & 0x00FFFFFF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
- } else {
- /* vector goes into second byte of register */
- ivar = ivar & 0xFFFF00FF;
- ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
- }
- adapter->tx_ring[tx_queue].eims_value = 1 << msix_vector;
- array_ew32(IVAR0, index, ivar);
- }
-}
-
-/**
- * igbvf_configure_msix - Configure MSI-X hardware
- *
- * igbvf_configure_msix sets up the hardware to properly
- * generate MSI-X interrupts.
- **/
-static void igbvf_configure_msix(struct igbvf_adapter *adapter)
-{
- u32 tmp;
- struct e1000_hw *hw = &adapter->hw;
- struct igbvf_ring *tx_ring = adapter->tx_ring;
- struct igbvf_ring *rx_ring = adapter->rx_ring;
- int vector = 0;
-
- adapter->eims_enable_mask = 0;
-
- igbvf_assign_vector(adapter, IGBVF_NO_QUEUE, 0, vector++);
- adapter->eims_enable_mask |= tx_ring->eims_value;
- if (tx_ring->itr_val)
- writel(tx_ring->itr_val,
- hw->hw_addr + tx_ring->itr_register);
- else
- writel(1952, hw->hw_addr + tx_ring->itr_register);
-
- igbvf_assign_vector(adapter, 0, IGBVF_NO_QUEUE, vector++);
- adapter->eims_enable_mask |= rx_ring->eims_value;
- if (rx_ring->itr_val)
- writel(rx_ring->itr_val,
- hw->hw_addr + rx_ring->itr_register);
- else
- writel(1952, hw->hw_addr + rx_ring->itr_register);
-
- /* set vector for other causes, i.e. link changes */
-
- tmp = (vector++ | E1000_IVAR_VALID);
-
- ew32(IVAR_MISC, tmp);
-
- adapter->eims_enable_mask = (1 << (vector)) - 1;
- adapter->eims_other = 1 << (vector - 1);
- e1e_flush();
-}
-
-static void igbvf_reset_interrupt_capability(struct igbvf_adapter *adapter)
-{
- if (adapter->msix_entries) {
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- }
-}
-
-/**
- * igbvf_set_interrupt_capability - set MSI or MSI-X if supported
- *
- * Attempt to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static void igbvf_set_interrupt_capability(struct igbvf_adapter *adapter)
-{
- int err = -ENOMEM;
- int i;
-
- /* we allocate 3 vectors, 1 for tx, 1 for rx, one for pf messages */
- adapter->msix_entries = kcalloc(3, sizeof(struct msix_entry),
- GFP_KERNEL);
- if (adapter->msix_entries) {
- for (i = 0; i < 3; i++)
- adapter->msix_entries[i].entry = i;
-
- err = pci_enable_msix(adapter->pdev,
- adapter->msix_entries, 3);
- }
-
- if (err) {
- /* MSI-X failed */
- dev_err(&adapter->pdev->dev,
- "Failed to initialize MSI-X interrupts.\n");
- igbvf_reset_interrupt_capability(adapter);
- }
-}
-
-/**
- * igbvf_request_msix - Initialize MSI-X interrupts
- *
- * igbvf_request_msix allocates MSI-X vectors and requests interrupts from the
- * kernel.
- **/
-static int igbvf_request_msix(struct igbvf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err = 0, vector = 0;
-
- if (strlen(netdev->name) < (IFNAMSIZ - 5)) {
- sprintf(adapter->tx_ring->name, "%s-tx-0", netdev->name);
- sprintf(adapter->rx_ring->name, "%s-rx-0", netdev->name);
- } else {
- memcpy(adapter->tx_ring->name, netdev->name, IFNAMSIZ);
- memcpy(adapter->rx_ring->name, netdev->name, IFNAMSIZ);
- }
-
- err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_intr_msix_tx, 0, adapter->tx_ring->name,
- netdev);
- if (err)
- goto out;
-
- adapter->tx_ring->itr_register = E1000_EITR(vector);
- adapter->tx_ring->itr_val = 1952;
- vector++;
-
- err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_intr_msix_rx, 0, adapter->rx_ring->name,
- netdev);
- if (err)
- goto out;
-
- adapter->rx_ring->itr_register = E1000_EITR(vector);
- adapter->rx_ring->itr_val = 1952;
- vector++;
-
- err = request_irq(adapter->msix_entries[vector].vector,
- igbvf_msix_other, 0, netdev->name, netdev);
- if (err)
- goto out;
-
- igbvf_configure_msix(adapter);
- return 0;
-out:
- return err;
-}
-
-/**
- * igbvf_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- **/
-static int __devinit igbvf_alloc_queues(struct igbvf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
-
- adapter->tx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
- if (!adapter->tx_ring)
- return -ENOMEM;
-
- adapter->rx_ring = kzalloc(sizeof(struct igbvf_ring), GFP_KERNEL);
- if (!adapter->rx_ring) {
- kfree(adapter->tx_ring);
- return -ENOMEM;
- }
-
- netif_napi_add(netdev, &adapter->rx_ring->napi, igbvf_poll, 64);
-
- return 0;
-}
-
-/**
- * igbvf_request_irq - initialize interrupts
- *
- * Attempts to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int igbvf_request_irq(struct igbvf_adapter *adapter)
-{
- int err = -1;
-
- /* igbvf supports msi-x only */
- if (adapter->msix_entries)
- err = igbvf_request_msix(adapter);
-
- if (!err)
- return err;
-
- dev_err(&adapter->pdev->dev,
- "Unable to allocate interrupt, Error: %d\n", err);
-
- return err;
-}
-
-static void igbvf_free_irq(struct igbvf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int vector;
-
- if (adapter->msix_entries) {
- for (vector = 0; vector < 3; vector++)
- free_irq(adapter->msix_entries[vector].vector, netdev);
- }
-}
-
-/**
- * igbvf_irq_disable - Mask off interrupt generation on the NIC
- **/
-static void igbvf_irq_disable(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- ew32(EIMC, ~0);
-
- if (adapter->msix_entries)
- ew32(EIAC, 0);
-}
-
-/**
- * igbvf_irq_enable - Enable default interrupt generation settings
- **/
-static void igbvf_irq_enable(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- ew32(EIAC, adapter->eims_enable_mask);
- ew32(EIAM, adapter->eims_enable_mask);
- ew32(EIMS, adapter->eims_enable_mask);
-}
-
-/**
- * igbvf_poll - NAPI Rx polling callback
- * @napi: struct associated with this polling callback
- * @budget: amount of packets driver is allowed to process this poll
- **/
-static int igbvf_poll(struct napi_struct *napi, int budget)
-{
- struct igbvf_ring *rx_ring = container_of(napi, struct igbvf_ring, napi);
- struct igbvf_adapter *adapter = rx_ring->adapter;
- struct e1000_hw *hw = &adapter->hw;
- int work_done = 0;
-
- igbvf_clean_rx_irq(adapter, &work_done, budget);
-
- /* If not enough Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
-
- if (adapter->itr_setting & 3)
- igbvf_set_itr(adapter);
-
- if (!test_bit(__IGBVF_DOWN, &adapter->state))
- ew32(EIMS, adapter->rx_ring->eims_value);
- }
-
- return work_done;
-}
-
-/**
- * igbvf_set_rlpml - set receive large packet maximum length
- * @adapter: board private structure
- *
- * Configure the maximum size of packets that will be received
- */
-static void igbvf_set_rlpml(struct igbvf_adapter *adapter)
-{
- int max_frame_size;
- struct e1000_hw *hw = &adapter->hw;
-
- max_frame_size = adapter->max_frame_size + VLAN_TAG_SIZE;
- e1000_rlpml_set_vf(hw, max_frame_size);
-}
-
-static void igbvf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- if (hw->mac.ops.set_vfta(hw, vid, true))
- dev_err(&adapter->pdev->dev, "Failed to add vlan id %d\n", vid);
- else
- set_bit(vid, adapter->active_vlans);
-}
-
-static void igbvf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- igbvf_irq_disable(adapter);
-
- if (!test_bit(__IGBVF_DOWN, &adapter->state))
- igbvf_irq_enable(adapter);
-
- if (hw->mac.ops.set_vfta(hw, vid, false))
- dev_err(&adapter->pdev->dev,
- "Failed to remove vlan id %d\n", vid);
- else
- clear_bit(vid, adapter->active_vlans);
-}
-
-static void igbvf_restore_vlan(struct igbvf_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- igbvf_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-/**
- * igbvf_configure_tx - Configure Transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-static void igbvf_configure_tx(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct igbvf_ring *tx_ring = adapter->tx_ring;
- u64 tdba;
- u32 txdctl, dca_txctrl;
-
- /* disable transmits */
- txdctl = er32(TXDCTL(0));
- ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
- e1e_flush();
- msleep(10);
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
- ew32(TDLEN(0), tx_ring->count * sizeof(union e1000_adv_tx_desc));
- tdba = tx_ring->dma;
- ew32(TDBAL(0), (tdba & DMA_BIT_MASK(32)));
- ew32(TDBAH(0), (tdba >> 32));
- ew32(TDH(0), 0);
- ew32(TDT(0), 0);
- tx_ring->head = E1000_TDH(0);
- tx_ring->tail = E1000_TDT(0);
-
- /* Turn off Relaxed Ordering on head write-backs. The writebacks
- * MUST be delivered in order or it will completely screw up
- * our bookeeping.
- */
- dca_txctrl = er32(DCA_TXCTRL(0));
- dca_txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
- ew32(DCA_TXCTRL(0), dca_txctrl);
-
- /* enable transmits */
- txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
- ew32(TXDCTL(0), txdctl);
-
- /* Setup Transmit Descriptor Settings for eop descriptor */
- adapter->txd_cmd = E1000_ADVTXD_DCMD_EOP | E1000_ADVTXD_DCMD_IFCS;
-
- /* enable Report Status bit */
- adapter->txd_cmd |= E1000_ADVTXD_DCMD_RS;
-}
-
-/**
- * igbvf_setup_srrctl - configure the receive control registers
- * @adapter: Board private structure
- **/
-static void igbvf_setup_srrctl(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- u32 srrctl = 0;
-
- srrctl &= ~(E1000_SRRCTL_DESCTYPE_MASK |
- E1000_SRRCTL_BSIZEHDR_MASK |
- E1000_SRRCTL_BSIZEPKT_MASK);
-
- /* Enable queue drop to avoid head of line blocking */
- srrctl |= E1000_SRRCTL_DROP_EN;
-
- /* Setup buffer sizes */
- srrctl |= ALIGN(adapter->rx_buffer_len, 1024) >>
- E1000_SRRCTL_BSIZEPKT_SHIFT;
-
- if (adapter->rx_buffer_len < 2048) {
- adapter->rx_ps_hdr_size = 0;
- srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
- } else {
- adapter->rx_ps_hdr_size = 128;
- srrctl |= adapter->rx_ps_hdr_size <<
- E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
- srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
- }
-
- ew32(SRRCTL(0), srrctl);
-}
-
-/**
- * igbvf_configure_rx - Configure Receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-static void igbvf_configure_rx(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct igbvf_ring *rx_ring = adapter->rx_ring;
- u64 rdba;
- u32 rdlen, rxdctl;
-
- /* disable receives */
- rxdctl = er32(RXDCTL(0));
- ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
- e1e_flush();
- msleep(10);
-
- rdlen = rx_ring->count * sizeof(union e1000_adv_rx_desc);
-
- /*
- * Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring
- */
- rdba = rx_ring->dma;
- ew32(RDBAL(0), (rdba & DMA_BIT_MASK(32)));
- ew32(RDBAH(0), (rdba >> 32));
- ew32(RDLEN(0), rx_ring->count * sizeof(union e1000_adv_rx_desc));
- rx_ring->head = E1000_RDH(0);
- rx_ring->tail = E1000_RDT(0);
- ew32(RDH(0), 0);
- ew32(RDT(0), 0);
-
- rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
- rxdctl &= 0xFFF00000;
- rxdctl |= IGBVF_RX_PTHRESH;
- rxdctl |= IGBVF_RX_HTHRESH << 8;
- rxdctl |= IGBVF_RX_WTHRESH << 16;
-
- igbvf_set_rlpml(adapter);
-
- /* enable receives */
- ew32(RXDCTL(0), rxdctl);
-}
-
-/**
- * igbvf_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-static void igbvf_set_multi(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u8 *mta_list = NULL;
- int i;
-
- if (!netdev_mc_empty(netdev)) {
- mta_list = kmalloc(netdev_mc_count(netdev) * 6, GFP_ATOMIC);
- if (!mta_list) {
- dev_err(&adapter->pdev->dev,
- "failed to allocate multicast filter list\n");
- return;
- }
- }
-
- /* prepare a packed array of only addresses. */
- i = 0;
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(mta_list + (i++ * ETH_ALEN), ha->addr, ETH_ALEN);
-
- hw->mac.ops.update_mc_addr_list(hw, mta_list, i, 0, 0);
- kfree(mta_list);
-}
-
-/**
- * igbvf_configure - configure the hardware for Rx and Tx
- * @adapter: private board structure
- **/
-static void igbvf_configure(struct igbvf_adapter *adapter)
-{
- igbvf_set_multi(adapter->netdev);
-
- igbvf_restore_vlan(adapter);
-
- igbvf_configure_tx(adapter);
- igbvf_setup_srrctl(adapter);
- igbvf_configure_rx(adapter);
- igbvf_alloc_rx_buffers(adapter->rx_ring,
- igbvf_desc_unused(adapter->rx_ring));
-}
-
-/* igbvf_reset - bring the hardware into a known good state
- *
- * This function boots the hardware and enables some settings that
- * require a configuration cycle of the hardware - those cannot be
- * set/changed during runtime. After reset the device needs to be
- * properly configured for Rx, Tx etc.
- */
-static void igbvf_reset(struct igbvf_adapter *adapter)
-{
- struct e1000_mac_info *mac = &adapter->hw.mac;
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
-
- /* Allow time for pending master requests to run */
- if (mac->ops.reset_hw(hw))
- dev_err(&adapter->pdev->dev, "PF still resetting\n");
-
- mac->ops.init_hw(hw);
-
- if (is_valid_ether_addr(adapter->hw.mac.addr)) {
- memcpy(netdev->dev_addr, adapter->hw.mac.addr,
- netdev->addr_len);
- memcpy(netdev->perm_addr, adapter->hw.mac.addr,
- netdev->addr_len);
- }
-
- adapter->last_reset = jiffies;
-}
-
-int igbvf_up(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- /* hardware has been reset, we need to reload some things */
- igbvf_configure(adapter);
-
- clear_bit(__IGBVF_DOWN, &adapter->state);
-
- napi_enable(&adapter->rx_ring->napi);
- if (adapter->msix_entries)
- igbvf_configure_msix(adapter);
-
- /* Clear any pending interrupts. */
- er32(EICR);
- igbvf_irq_enable(adapter);
-
- /* start the watchdog */
- hw->mac.get_link_status = 1;
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
-
-
- return 0;
-}
-
-void igbvf_down(struct igbvf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct e1000_hw *hw = &adapter->hw;
- u32 rxdctl, txdctl;
-
- /*
- * signal that we're down so the interrupt handler does not
- * reschedule our watchdog timer
- */
- set_bit(__IGBVF_DOWN, &adapter->state);
-
- /* disable receives in the hardware */
- rxdctl = er32(RXDCTL(0));
- ew32(RXDCTL(0), rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
-
- netif_stop_queue(netdev);
-
- /* disable transmits in the hardware */
- txdctl = er32(TXDCTL(0));
- ew32(TXDCTL(0), txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
-
- /* flush both disables and wait for them to finish */
- e1e_flush();
- msleep(10);
-
- napi_disable(&adapter->rx_ring->napi);
-
- igbvf_irq_disable(adapter);
-
- del_timer_sync(&adapter->watchdog_timer);
-
- netif_carrier_off(netdev);
-
- /* record the stats before reset*/
- igbvf_update_stats(adapter);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- igbvf_reset(adapter);
- igbvf_clean_tx_ring(adapter->tx_ring);
- igbvf_clean_rx_ring(adapter->rx_ring);
-}
-
-void igbvf_reinit_locked(struct igbvf_adapter *adapter)
-{
- might_sleep();
- while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
- msleep(1);
- igbvf_down(adapter);
- igbvf_up(adapter);
- clear_bit(__IGBVF_RESETTING, &adapter->state);
-}
-
-/**
- * igbvf_sw_init - Initialize general software structures (struct igbvf_adapter)
- * @adapter: board private structure to initialize
- *
- * igbvf_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int __devinit igbvf_sw_init(struct igbvf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- s32 rc;
-
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN;
- adapter->rx_ps_hdr_size = 0;
- adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
-
- adapter->tx_int_delay = 8;
- adapter->tx_abs_int_delay = 32;
- adapter->rx_int_delay = 0;
- adapter->rx_abs_int_delay = 8;
- adapter->itr_setting = 3;
- adapter->itr = 20000;
-
- /* Set various function pointers */
- adapter->ei->init_ops(&adapter->hw);
-
- rc = adapter->hw.mac.ops.init_params(&adapter->hw);
- if (rc)
- return rc;
-
- rc = adapter->hw.mbx.ops.init_params(&adapter->hw);
- if (rc)
- return rc;
-
- igbvf_set_interrupt_capability(adapter);
-
- if (igbvf_alloc_queues(adapter))
- return -ENOMEM;
-
- spin_lock_init(&adapter->tx_queue_lock);
-
- /* Explicitly disable IRQ since the NIC can be in any state. */
- igbvf_irq_disable(adapter);
-
- spin_lock_init(&adapter->stats_lock);
-
- set_bit(__IGBVF_DOWN, &adapter->state);
- return 0;
-}
-
-static void igbvf_initialize_last_counter_stats(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
-
- adapter->stats.last_gprc = er32(VFGPRC);
- adapter->stats.last_gorc = er32(VFGORC);
- adapter->stats.last_gptc = er32(VFGPTC);
- adapter->stats.last_gotc = er32(VFGOTC);
- adapter->stats.last_mprc = er32(VFMPRC);
- adapter->stats.last_gotlbc = er32(VFGOTLBC);
- adapter->stats.last_gptlbc = er32(VFGPTLBC);
- adapter->stats.last_gorlbc = er32(VFGORLBC);
- adapter->stats.last_gprlbc = er32(VFGPRLBC);
-
- adapter->stats.base_gprc = er32(VFGPRC);
- adapter->stats.base_gorc = er32(VFGORC);
- adapter->stats.base_gptc = er32(VFGPTC);
- adapter->stats.base_gotc = er32(VFGOTC);
- adapter->stats.base_mprc = er32(VFMPRC);
- adapter->stats.base_gotlbc = er32(VFGOTLBC);
- adapter->stats.base_gptlbc = er32(VFGPTLBC);
- adapter->stats.base_gorlbc = er32(VFGORLBC);
- adapter->stats.base_gprlbc = er32(VFGPRLBC);
-}
-
-/**
- * igbvf_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-static int igbvf_open(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- int err;
-
- /* disallow open during test */
- if (test_bit(__IGBVF_TESTING, &adapter->state))
- return -EBUSY;
-
- /* allocate transmit descriptors */
- err = igbvf_setup_tx_resources(adapter, adapter->tx_ring);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = igbvf_setup_rx_resources(adapter, adapter->rx_ring);
- if (err)
- goto err_setup_rx;
-
- /*
- * before we allocate an interrupt, we must be ready to handle it.
- * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
- * as soon as we call pci_request_irq, so we have to setup our
- * clean_rx handler before we do so.
- */
- igbvf_configure(adapter);
-
- err = igbvf_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- /* From here on the code is the same as igbvf_up() */
- clear_bit(__IGBVF_DOWN, &adapter->state);
-
- napi_enable(&adapter->rx_ring->napi);
-
- /* clear any pending interrupts */
- er32(EICR);
-
- igbvf_irq_enable(adapter);
-
- /* start the watchdog */
- hw->mac.get_link_status = 1;
- mod_timer(&adapter->watchdog_timer, jiffies + 1);
-
- return 0;
-
-err_req_irq:
- igbvf_free_rx_resources(adapter->rx_ring);
-err_setup_rx:
- igbvf_free_tx_resources(adapter->tx_ring);
-err_setup_tx:
- igbvf_reset(adapter);
-
- return err;
-}
-
-/**
- * igbvf_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-static int igbvf_close(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
- igbvf_down(adapter);
-
- igbvf_free_irq(adapter);
-
- igbvf_free_tx_resources(adapter->tx_ring);
- igbvf_free_rx_resources(adapter->rx_ring);
-
- return 0;
-}
-/**
- * igbvf_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-static int igbvf_set_mac(struct net_device *netdev, void *p)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
-
- hw->mac.ops.rar_set(hw, hw->mac.addr, 0);
-
- if (memcmp(addr->sa_data, hw->mac.addr, 6))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-
- return 0;
-}
-
-#define UPDATE_VF_COUNTER(reg, name) \
- { \
- u32 current_counter = er32(reg); \
- if (current_counter < adapter->stats.last_##name) \
- adapter->stats.name += 0x100000000LL; \
- adapter->stats.last_##name = current_counter; \
- adapter->stats.name &= 0xFFFFFFFF00000000LL; \
- adapter->stats.name |= current_counter; \
- }
-
-/**
- * igbvf_update_stats - Update the board statistics counters
- * @adapter: board private structure
-**/
-void igbvf_update_stats(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
-
- /*
- * Prevent stats update while adapter is being reset, link is down
- * or if the pci connection is down.
- */
- if (adapter->link_speed == 0)
- return;
-
- if (test_bit(__IGBVF_RESETTING, &adapter->state))
- return;
-
- if (pci_channel_offline(pdev))
- return;
-
- UPDATE_VF_COUNTER(VFGPRC, gprc);
- UPDATE_VF_COUNTER(VFGORC, gorc);
- UPDATE_VF_COUNTER(VFGPTC, gptc);
- UPDATE_VF_COUNTER(VFGOTC, gotc);
- UPDATE_VF_COUNTER(VFMPRC, mprc);
- UPDATE_VF_COUNTER(VFGOTLBC, gotlbc);
- UPDATE_VF_COUNTER(VFGPTLBC, gptlbc);
- UPDATE_VF_COUNTER(VFGORLBC, gorlbc);
- UPDATE_VF_COUNTER(VFGPRLBC, gprlbc);
-
- /* Fill out the OS statistics structure */
- adapter->net_stats.multicast = adapter->stats.mprc;
-}
-
-static void igbvf_print_link_info(struct igbvf_adapter *adapter)
-{
- dev_info(&adapter->pdev->dev, "Link is Up %d Mbps %s\n",
- adapter->link_speed,
- ((adapter->link_duplex == FULL_DUPLEX) ?
- "Full Duplex" : "Half Duplex"));
-}
-
-static bool igbvf_has_link(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- s32 ret_val = E1000_SUCCESS;
- bool link_active;
-
- /* If interface is down, stay link down */
- if (test_bit(__IGBVF_DOWN, &adapter->state))
- return false;
-
- ret_val = hw->mac.ops.check_for_link(hw);
- link_active = !hw->mac.get_link_status;
-
- /* if check for link returns error we will need to reset */
- if (ret_val && time_after(jiffies, adapter->last_reset + (10 * HZ)))
- schedule_work(&adapter->reset_task);
-
- return link_active;
-}
-
-/**
- * igbvf_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void igbvf_watchdog(unsigned long data)
-{
- struct igbvf_adapter *adapter = (struct igbvf_adapter *) data;
-
- /* Do the rest outside of interrupt context */
- schedule_work(&adapter->watchdog_task);
-}
-
-static void igbvf_watchdog_task(struct work_struct *work)
-{
- struct igbvf_adapter *adapter = container_of(work,
- struct igbvf_adapter,
- watchdog_task);
- struct net_device *netdev = adapter->netdev;
- struct e1000_mac_info *mac = &adapter->hw.mac;
- struct igbvf_ring *tx_ring = adapter->tx_ring;
- struct e1000_hw *hw = &adapter->hw;
- u32 link;
- int tx_pending = 0;
-
- link = igbvf_has_link(adapter);
-
- if (link) {
- if (!netif_carrier_ok(netdev)) {
- mac->ops.get_link_up_info(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
- igbvf_print_link_info(adapter);
-
- netif_carrier_on(netdev);
- netif_wake_queue(netdev);
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- dev_info(&adapter->pdev->dev, "Link is Down\n");
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- }
- }
-
- if (netif_carrier_ok(netdev)) {
- igbvf_update_stats(adapter);
- } else {
- tx_pending = (igbvf_desc_unused(tx_ring) + 1 <
- tx_ring->count);
- if (tx_pending) {
- /*
- * We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context).
- */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
- }
- }
-
- /* Cause software interrupt to ensure Rx ring is cleaned */
- ew32(EICS, adapter->rx_ring->eims_value);
-
- /* Reset the timer */
- if (!test_bit(__IGBVF_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + (2 * HZ)));
-}
-
-#define IGBVF_TX_FLAGS_CSUM 0x00000001
-#define IGBVF_TX_FLAGS_VLAN 0x00000002
-#define IGBVF_TX_FLAGS_TSO 0x00000004
-#define IGBVF_TX_FLAGS_IPV4 0x00000008
-#define IGBVF_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IGBVF_TX_FLAGS_VLAN_SHIFT 16
-
-static int igbvf_tso(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
-{
- struct e1000_adv_tx_context_desc *context_desc;
- unsigned int i;
- int err;
- struct igbvf_buffer *buffer_info;
- u32 info = 0, tu_cmd = 0;
- u32 mss_l4len_idx, l4len;
- *hdr_len = 0;
-
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err) {
- dev_err(&adapter->pdev->dev,
- "igbvf_tso returning an error\n");
- return err;
- }
- }
-
- l4len = tcp_hdrlen(skb);
- *hdr_len += l4len;
-
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
- } else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- }
-
- i = tx_ring->next_to_use;
-
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
- /* VLAN MACLEN IPLEN */
- if (tx_flags & IGBVF_TX_FLAGS_VLAN)
- info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
- info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
- *hdr_len += skb_network_offset(skb);
- info |= (skb_transport_header(skb) - skb_network_header(skb));
- *hdr_len += (skb_transport_header(skb) - skb_network_header(skb));
- context_desc->vlan_macip_lens = cpu_to_le32(info);
-
- /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
- tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
-
- if (skb->protocol == htons(ETH_P_IP))
- tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
-
- context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
-
- /* MSS L4LEN IDX */
- mss_l4len_idx = (skb_shinfo(skb)->gso_size << E1000_ADVTXD_MSS_SHIFT);
- mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
-
- context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
- context_desc->seqnum_seed = 0;
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = 0;
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- tx_ring->next_to_use = i;
-
- return true;
-}
-
-static inline bool igbvf_tx_csum(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags)
-{
- struct e1000_adv_tx_context_desc *context_desc;
- unsigned int i;
- struct igbvf_buffer *buffer_info;
- u32 info = 0, tu_cmd = 0;
-
- if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
- (tx_flags & IGBVF_TX_FLAGS_VLAN)) {
- i = tx_ring->next_to_use;
- buffer_info = &tx_ring->buffer_info[i];
- context_desc = IGBVF_TX_CTXTDESC_ADV(*tx_ring, i);
-
- if (tx_flags & IGBVF_TX_FLAGS_VLAN)
- info |= (tx_flags & IGBVF_TX_FLAGS_VLAN_MASK);
-
- info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- info |= (skb_transport_header(skb) -
- skb_network_header(skb));
-
-
- context_desc->vlan_macip_lens = cpu_to_le32(info);
-
- tu_cmd |= (E1000_TXD_CMD_DEXT | E1000_ADVTXD_DTYP_CTXT);
-
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- switch (skb->protocol) {
- case __constant_htons(ETH_P_IP):
- tu_cmd |= E1000_ADVTXD_TUCMD_IPV4;
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
- break;
- case __constant_htons(ETH_P_IPV6):
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- tu_cmd |= E1000_ADVTXD_TUCMD_L4T_TCP;
- break;
- default:
- break;
- }
- }
-
- context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
- context_desc->seqnum_seed = 0;
- context_desc->mss_l4len_idx = 0;
-
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->dma = 0;
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return true;
- }
-
- return false;
-}
-
-static int igbvf_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- /* there is enough descriptors then we don't need to worry */
- if (igbvf_desc_unused(adapter->tx_ring) >= size)
- return 0;
-
- netif_stop_queue(netdev);
-
- smp_mb();
-
- /* We need to check again just in case room has been made available */
- if (igbvf_desc_unused(adapter->tx_ring) < size)
- return -EBUSY;
-
- netif_wake_queue(netdev);
-
- ++adapter->restart_queue;
- return 0;
-}
-
-#define IGBVF_MAX_TXD_PWR 16
-#define IGBVF_MAX_DATA_PER_TXD (1 << IGBVF_MAX_TXD_PWR)
-
-static inline int igbvf_tx_map_adv(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
- struct sk_buff *skb,
- unsigned int first)
-{
- struct igbvf_buffer *buffer_info;
- struct pci_dev *pdev = adapter->pdev;
- unsigned int len = skb_headlen(skb);
- unsigned int count = 0, i;
- unsigned int f;
-
- i = tx_ring->next_to_use;
-
- buffer_info = &tx_ring->buffer_info[i];
- BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
- buffer_info->length = len;
- /* set time_stamp *before* dma to help avoid a possible race */
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->mapped_as_page = false;
- buffer_info->dma = dma_map_single(&pdev->dev, skb->data, len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
-
-
- for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
-
- buffer_info = &tx_ring->buffer_info[i];
- BUG_ON(len >= IGBVF_MAX_DATA_PER_TXD);
- buffer_info->length = len;
- buffer_info->time_stamp = jiffies;
- buffer_info->next_to_watch = i;
- buffer_info->mapped_as_page = true;
- buffer_info->dma = dma_map_page(&pdev->dev,
- frag->page,
- frag->page_offset,
- len,
- DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- }
-
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return ++count;
-
-dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
-
- /* clear timestamp and dma mappings for failed buffer_info mapping */
- buffer_info->dma = 0;
- buffer_info->time_stamp = 0;
- buffer_info->length = 0;
- buffer_info->next_to_watch = 0;
- buffer_info->mapped_as_page = false;
- if (count)
- count--;
-
- /* clear timestamp and dma mappings for remaining portion of packet */
- while (count--) {
- if (i==0)
- i += tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- igbvf_put_txbuf(adapter, buffer_info);
- }
-
- return 0;
-}
-
-static inline void igbvf_tx_queue_adv(struct igbvf_adapter *adapter,
- struct igbvf_ring *tx_ring,
- int tx_flags, int count, u32 paylen,
- u8 hdr_len)
-{
- union e1000_adv_tx_desc *tx_desc = NULL;
- struct igbvf_buffer *buffer_info;
- u32 olinfo_status = 0, cmd_type_len;
- unsigned int i;
-
- cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
- E1000_ADVTXD_DCMD_DEXT);
-
- if (tx_flags & IGBVF_TX_FLAGS_VLAN)
- cmd_type_len |= E1000_ADVTXD_DCMD_VLE;
-
- if (tx_flags & IGBVF_TX_FLAGS_TSO) {
- cmd_type_len |= E1000_ADVTXD_DCMD_TSE;
-
- /* insert tcp checksum */
- olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
-
- /* insert ip checksum */
- if (tx_flags & IGBVF_TX_FLAGS_IPV4)
- olinfo_status |= E1000_TXD_POPTS_IXSM << 8;
-
- } else if (tx_flags & IGBVF_TX_FLAGS_CSUM) {
- olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
- }
-
- olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
-
- i = tx_ring->next_to_use;
- while (count--) {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = IGBVF_TX_DESC_ADV(*tx_ring, i);
- tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->read.cmd_type_len =
- cpu_to_le32(cmd_type_len | buffer_info->length);
- tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
- /* we need this if more than one processor can write to our tail
- * at a time, it syncronizes IO on IA64/Altix systems */
- mmiowb();
-}
-
-static netdev_tx_t igbvf_xmit_frame_ring_adv(struct sk_buff *skb,
- struct net_device *netdev,
- struct igbvf_ring *tx_ring)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- unsigned int first, tx_flags = 0;
- u8 hdr_len = 0;
- int count = 0;
- int tso = 0;
-
- if (test_bit(__IGBVF_DOWN, &adapter->state)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->len <= 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- /*
- * need: count + 4 desc gap to keep tail from touching
- * + 2 desc gap to keep tail from touching head,
- * + 1 desc for skb->data,
- * + 1 desc for context descriptor,
- * head, otherwise try next time
- */
- if (igbvf_maybe_stop_tx(netdev, skb_shinfo(skb)->nr_frags + 4)) {
- /* this is a hard error */
- return NETDEV_TX_BUSY;
- }
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= IGBVF_TX_FLAGS_VLAN;
- tx_flags |= (vlan_tx_tag_get(skb) << IGBVF_TX_FLAGS_VLAN_SHIFT);
- }
-
- if (skb->protocol == htons(ETH_P_IP))
- tx_flags |= IGBVF_TX_FLAGS_IPV4;
-
- first = tx_ring->next_to_use;
-
- tso = skb_is_gso(skb) ?
- igbvf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len) : 0;
- if (unlikely(tso < 0)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (tso)
- tx_flags |= IGBVF_TX_FLAGS_TSO;
- else if (igbvf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
- (skb->ip_summed == CHECKSUM_PARTIAL))
- tx_flags |= IGBVF_TX_FLAGS_CSUM;
-
- /*
- * count reflects descriptors mapped, if 0 then mapping error
- * has occurred and we need to rewind the descriptor queue
- */
- count = igbvf_tx_map_adv(adapter, tx_ring, skb, first);
-
- if (count) {
- igbvf_tx_queue_adv(adapter, tx_ring, tx_flags, count,
- skb->len, hdr_len);
- /* Make sure there is space in the ring for the next send. */
- igbvf_maybe_stop_tx(netdev, MAX_SKB_FRAGS + 4);
- } else {
- dev_kfree_skb_any(skb);
- tx_ring->buffer_info[first].time_stamp = 0;
- tx_ring->next_to_use = first;
- }
-
- return NETDEV_TX_OK;
-}
-
-static netdev_tx_t igbvf_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct igbvf_ring *tx_ring;
-
- if (test_bit(__IGBVF_DOWN, &adapter->state)) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- tx_ring = &adapter->tx_ring[0];
-
- return igbvf_xmit_frame_ring_adv(skb, netdev, tx_ring);
-}
-
-/**
- * igbvf_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-static void igbvf_tx_timeout(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- adapter->tx_timeout_count++;
- schedule_work(&adapter->reset_task);
-}
-
-static void igbvf_reset_task(struct work_struct *work)
-{
- struct igbvf_adapter *adapter;
- adapter = container_of(work, struct igbvf_adapter, reset_task);
-
- igbvf_reinit_locked(adapter);
-}
-
-/**
- * igbvf_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- *
- * Returns the address of the device statistics structure.
- * The statistics are actually updated from the timer callback.
- **/
-static struct net_device_stats *igbvf_get_stats(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- /* only return the current stats */
- return &adapter->net_stats;
-}
-
-/**
- * igbvf_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-static int igbvf_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
-
- if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
- dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
- return -EINVAL;
- }
-
-#define MAX_STD_JUMBO_FRAME_SIZE 9234
- if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
- dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
- return -EINVAL;
- }
-
- while (test_and_set_bit(__IGBVF_RESETTING, &adapter->state))
- msleep(1);
- /* igbvf_down has a dependency on max_frame_size */
- adapter->max_frame_size = max_frame;
- if (netif_running(netdev))
- igbvf_down(adapter);
-
- /*
- * NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
- * means we reserve 2 more, this pushes us to allocate from the next
- * larger slab size.
- * i.e. RXBUFFER_2048 --> size-4096 slab
- * However with the new *_jumbo_rx* routines, jumbo receives will use
- * fragmented skbs
- */
-
- if (max_frame <= 1024)
- adapter->rx_buffer_len = 1024;
- else if (max_frame <= 2048)
- adapter->rx_buffer_len = 2048;
- else
-#if (PAGE_SIZE / 2) > 16384
- adapter->rx_buffer_len = 16384;
-#else
- adapter->rx_buffer_len = PAGE_SIZE / 2;
-#endif
-
-
- /* adjust allocation if LPE protects us, and we aren't using SBP */
- if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
- (max_frame == ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN))
- adapter->rx_buffer_len = ETH_FRAME_LEN + VLAN_HLEN +
- ETH_FCS_LEN;
-
- dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
- netdev->mtu = new_mtu;
-
- if (netif_running(netdev))
- igbvf_up(adapter);
- else
- igbvf_reset(adapter);
-
- clear_bit(__IGBVF_RESETTING, &adapter->state);
-
- return 0;
-}
-
-static int igbvf_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
-{
- switch (cmd) {
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static int igbvf_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev)) {
- WARN_ON(test_bit(__IGBVF_RESETTING, &adapter->state));
- igbvf_down(adapter);
- igbvf_free_irq(adapter);
- }
-
-#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-#endif
-
- pci_disable_device(pdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int igbvf_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- u32 err;
-
- pci_restore_state(pdev);
- err = pci_enable_device_mem(pdev);
- if (err) {
- dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
- return err;
- }
-
- pci_set_master(pdev);
-
- if (netif_running(netdev)) {
- err = igbvf_request_irq(adapter);
- if (err)
- return err;
- }
-
- igbvf_reset(adapter);
-
- if (netif_running(netdev))
- igbvf_up(adapter);
-
- netif_device_attach(netdev);
-
- return 0;
-}
-#endif
-
-static void igbvf_shutdown(struct pci_dev *pdev)
-{
- igbvf_suspend(pdev, PMSG_SUSPEND);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void igbvf_netpoll(struct net_device *netdev)
-{
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- disable_irq(adapter->pdev->irq);
-
- igbvf_clean_tx_irq(adapter->tx_ring);
-
- enable_irq(adapter->pdev->irq);
-}
-#endif
-
-/**
- * igbvf_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t igbvf_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- igbvf_down(adapter);
- pci_disable_device(pdev);
-
- /* Request a slot slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * igbvf_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot. Implementation
- * resembles the first-half of the igbvf_resume routine.
- */
-static pci_ers_result_t igbvf_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- if (pci_enable_device_mem(pdev)) {
- dev_err(&pdev->dev,
- "Cannot re-enable PCI device after reset.\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- pci_set_master(pdev);
-
- igbvf_reset(adapter);
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * igbvf_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation. Implementation resembles the
- * second-half of the igbvf_resume routine.
- */
-static void igbvf_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
-
- if (netif_running(netdev)) {
- if (igbvf_up(adapter)) {
- dev_err(&pdev->dev,
- "can't bring device back up after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
-}
-
-static void igbvf_print_device_info(struct igbvf_adapter *adapter)
-{
- struct e1000_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- dev_info(&pdev->dev, "Intel(R) 82576 Virtual Function\n");
- dev_info(&pdev->dev, "Address: %pM\n", netdev->dev_addr);
- dev_info(&pdev->dev, "MAC: %d\n", hw->mac.type);
-}
-
-static const struct net_device_ops igbvf_netdev_ops = {
- .ndo_open = igbvf_open,
- .ndo_stop = igbvf_close,
- .ndo_start_xmit = igbvf_xmit_frame,
- .ndo_get_stats = igbvf_get_stats,
- .ndo_set_multicast_list = igbvf_set_multi,
- .ndo_set_mac_address = igbvf_set_mac,
- .ndo_change_mtu = igbvf_change_mtu,
- .ndo_do_ioctl = igbvf_ioctl,
- .ndo_tx_timeout = igbvf_tx_timeout,
- .ndo_vlan_rx_add_vid = igbvf_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = igbvf_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = igbvf_netpoll,
-#endif
-};
-
-/**
- * igbvf_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in igbvf_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * igbvf_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit igbvf_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct igbvf_adapter *adapter;
- struct e1000_hw *hw;
- const struct igbvf_info *ei = igbvf_info_tbl[ent->driver_data];
-
- static int cards_found;
- int err, pci_using_dac;
-
- err = pci_enable_device_mem(pdev);
- if (err)
- return err;
-
- pci_using_dac = 0;
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err)
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
- DMA_BIT_MASK(32));
- if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
- goto err_dma;
- }
- }
- }
-
- err = pci_request_regions(pdev, igbvf_driver_name);
- if (err)
- goto err_pci_reg;
-
- pci_set_master(pdev);
-
- err = -ENOMEM;
- netdev = alloc_etherdev(sizeof(struct igbvf_adapter));
- if (!netdev)
- goto err_alloc_etherdev;
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- hw = &adapter->hw;
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- adapter->ei = ei;
- adapter->pba = ei->pba;
- adapter->flags = ei->flags;
- adapter->hw.back = adapter;
- adapter->hw.mac.type = ei->mac;
- adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_device_id = pdev->subsystem_device;
- hw->revision_id = pdev->revision;
-
- err = -EIO;
- adapter->hw.hw_addr = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
-
- if (!adapter->hw.hw_addr)
- goto err_ioremap;
-
- if (ei->get_variants) {
- err = ei->get_variants(adapter);
- if (err)
- goto err_ioremap;
- }
-
- /* setup adapter struct */
- err = igbvf_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- /* construct the net_device struct */
- netdev->netdev_ops = &igbvf_netdev_ops;
-
- igbvf_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- adapter->bd_number = cards_found++;
-
- netdev->features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
-
- netdev->features |= NETIF_F_IPV6_CSUM;
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
-
- if (pci_using_dac)
- netdev->features |= NETIF_F_HIGHDMA;
-
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
- netdev->vlan_features |= NETIF_F_IP_CSUM;
- netdev->vlan_features |= NETIF_F_IPV6_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- /*reset the controller to put the device in a known good state */
- err = hw->mac.ops.reset_hw(hw);
- if (err) {
- dev_info(&pdev->dev,
- "PF still in reset state, assigning new address."
- " Is the PF interface up?\n");
- dev_hw_addr_random(adapter->netdev, hw->mac.addr);
- } else {
- err = hw->mac.ops.read_mac_addr(hw);
- if (err) {
- dev_err(&pdev->dev, "Error reading MAC address\n");
- goto err_hw_init;
- }
- }
-
- memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
- memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- dev_err(&pdev->dev, "Invalid MAC Address: %pM\n",
- netdev->dev_addr);
- err = -EIO;
- goto err_hw_init;
- }
-
- setup_timer(&adapter->watchdog_timer, &igbvf_watchdog,
- (unsigned long) adapter);
-
- INIT_WORK(&adapter->reset_task, igbvf_reset_task);
- INIT_WORK(&adapter->watchdog_task, igbvf_watchdog_task);
-
- /* ring size defaults */
- adapter->rx_ring->count = 1024;
- adapter->tx_ring->count = 1024;
-
- /* reset the hardware with the new settings */
- igbvf_reset(adapter);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_hw_init;
-
- /* tell the stack to leave us alone until igbvf_open() is called */
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
-
- igbvf_print_device_info(adapter);
-
- igbvf_initialize_last_counter_stats(adapter);
-
- return 0;
-
-err_hw_init:
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-err_sw_init:
- igbvf_reset_interrupt_capability(adapter);
- iounmap(adapter->hw.hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_regions(pdev);
-err_pci_reg:
-err_dma:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * igbvf_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * igbvf_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-static void __devexit igbvf_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct igbvf_adapter *adapter = netdev_priv(netdev);
- struct e1000_hw *hw = &adapter->hw;
-
- /*
- * The watchdog timer may be rescheduled, so explicitly
- * disable it from being rescheduled.
- */
- set_bit(__IGBVF_DOWN, &adapter->state);
- del_timer_sync(&adapter->watchdog_timer);
-
- cancel_work_sync(&adapter->reset_task);
- cancel_work_sync(&adapter->watchdog_task);
-
- unregister_netdev(netdev);
-
- igbvf_reset_interrupt_capability(adapter);
-
- /*
- * it is important to delete the napi struct prior to freeing the
- * rx ring so that you do not end up with null pointer refs
- */
- netif_napi_del(&adapter->rx_ring->napi);
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-
- iounmap(hw->hw_addr);
- if (hw->flash_address)
- iounmap(hw->flash_address);
- pci_release_regions(pdev);
-
- free_netdev(netdev);
-
- pci_disable_device(pdev);
-}
-
-/* PCI Error Recovery (ERS) */
-static struct pci_error_handlers igbvf_err_handler = {
- .error_detected = igbvf_io_error_detected,
- .slot_reset = igbvf_io_slot_reset,
- .resume = igbvf_io_resume,
-};
-
-static DEFINE_PCI_DEVICE_TABLE(igbvf_pci_tbl) = {
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_VF), board_vf },
- { PCI_VDEVICE(INTEL, E1000_DEV_ID_I350_VF), board_i350_vf },
- { } /* terminate list */
-};
-MODULE_DEVICE_TABLE(pci, igbvf_pci_tbl);
-
-/* PCI Device API Driver */
-static struct pci_driver igbvf_driver = {
- .name = igbvf_driver_name,
- .id_table = igbvf_pci_tbl,
- .probe = igbvf_probe,
- .remove = __devexit_p(igbvf_remove),
-#ifdef CONFIG_PM
- /* Power Management Hooks */
- .suspend = igbvf_suspend,
- .resume = igbvf_resume,
-#endif
- .shutdown = igbvf_shutdown,
- .err_handler = &igbvf_err_handler
-};
-
-/**
- * igbvf_init_module - Driver Registration Routine
- *
- * igbvf_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-static int __init igbvf_init_module(void)
-{
- int ret;
- printk(KERN_INFO "%s - version %s\n",
- igbvf_driver_string, igbvf_driver_version);
- printk(KERN_INFO "%s\n", igbvf_copyright);
-
- ret = pci_register_driver(&igbvf_driver);
-
- return ret;
-}
-module_init(igbvf_init_module);
-
-/**
- * igbvf_exit_module - Driver Exit Cleanup Routine
- *
- * igbvf_exit_module is called just before the driver is removed
- * from memory.
- **/
-static void __exit igbvf_exit_module(void)
-{
- pci_unregister_driver(&igbvf_driver);
-}
-module_exit(igbvf_exit_module);
-
-
-MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
-MODULE_DESCRIPTION("Intel(R) 82576 Virtual Function Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-/* netdev.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_REGS_H_
-#define _E1000_REGS_H_
-
-#define E1000_CTRL 0x00000 /* Device Control - RW */
-#define E1000_STATUS 0x00008 /* Device Status - RO */
-#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */
-#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */
-#define E1000_EITR(_n) (0x01680 + (0x4 * (_n)))
-#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */
-#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */
-#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */
-#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */
-#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */
-#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */
-#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */
-/*
- * Convenience macros
- *
- * Note: "_n" is the queue number of the register to be written to.
- *
- * Example usage:
- * E1000_RDBAL_REG(current_rx_queue)
- */
-#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \
- (0x0C000 + ((_n) * 0x40)))
-#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \
- (0x0C004 + ((_n) * 0x40)))
-#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \
- (0x0C008 + ((_n) * 0x40)))
-#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \
- (0x0C00C + ((_n) * 0x40)))
-#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \
- (0x0C010 + ((_n) * 0x40)))
-#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \
- (0x0C018 + ((_n) * 0x40)))
-#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \
- (0x0C028 + ((_n) * 0x40)))
-#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \
- (0x0E000 + ((_n) * 0x40)))
-#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \
- (0x0E004 + ((_n) * 0x40)))
-#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \
- (0x0E008 + ((_n) * 0x40)))
-#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \
- (0x0E010 + ((_n) * 0x40)))
-#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \
- (0x0E018 + ((_n) * 0x40)))
-#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \
- (0x0E028 + ((_n) * 0x40)))
-#define E1000_DCA_TXCTRL(_n) (0x03814 + (_n << 8))
-#define E1000_DCA_RXCTRL(_n) (0x02814 + (_n << 8))
-#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
- (0x054E0 + ((_i - 16) * 8)))
-#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
- (0x054E4 + ((_i - 16) * 8)))
-
-/* Statistics registers */
-#define E1000_VFGPRC 0x00F10
-#define E1000_VFGORC 0x00F18
-#define E1000_VFMPRC 0x00F3C
-#define E1000_VFGPTC 0x00F14
-#define E1000_VFGOTC 0x00F34
-#define E1000_VFGOTLBC 0x00F50
-#define E1000_VFGPTLBC 0x00F44
-#define E1000_VFGORLBC 0x00F48
-#define E1000_VFGPRLBC 0x00F40
-
-/* These act per VF so an array friendly macro is used */
-#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n)))
-#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n)))
-
-/* Define macros for handling registers */
-#define er32(reg) readl(hw->hw_addr + E1000_##reg)
-#define ew32(reg, val) writel((val), hw->hw_addr + E1000_##reg)
-#define array_er32(reg, offset) \
- readl(hw->hw_addr + E1000_##reg + (offset << 2))
-#define array_ew32(reg, offset, val) \
- writel((val), hw->hw_addr + E1000_##reg + (offset << 2))
-#define e1e_flush() er32(STATUS)
-
-#endif
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-#include "vf.h"
-
-static s32 e1000_check_for_link_vf(struct e1000_hw *hw);
-static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
- u16 *duplex);
-static s32 e1000_init_hw_vf(struct e1000_hw *hw);
-static s32 e1000_reset_hw_vf(struct e1000_hw *hw);
-
-static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *,
- u32, u32, u32);
-static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32);
-static s32 e1000_read_mac_addr_vf(struct e1000_hw *);
-static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool);
-
-/**
- * e1000_init_mac_params_vf - Inits MAC params
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_init_mac_params_vf(struct e1000_hw *hw)
-{
- struct e1000_mac_info *mac = &hw->mac;
-
- /* VF's have no MTA Registers - PF feature only */
- mac->mta_reg_count = 128;
- /* VF's have no access to RAR entries */
- mac->rar_entry_count = 1;
-
- /* Function pointers */
- /* reset */
- mac->ops.reset_hw = e1000_reset_hw_vf;
- /* hw initialization */
- mac->ops.init_hw = e1000_init_hw_vf;
- /* check for link */
- mac->ops.check_for_link = e1000_check_for_link_vf;
- /* link info */
- mac->ops.get_link_up_info = e1000_get_link_up_info_vf;
- /* multicast address update */
- mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf;
- /* set mac address */
- mac->ops.rar_set = e1000_rar_set_vf;
- /* read mac address */
- mac->ops.read_mac_addr = e1000_read_mac_addr_vf;
- /* set vlan filter table array */
- mac->ops.set_vfta = e1000_set_vfta_vf;
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_init_function_pointers_vf - Inits function pointers
- * @hw: pointer to the HW structure
- **/
-void e1000_init_function_pointers_vf(struct e1000_hw *hw)
-{
- hw->mac.ops.init_params = e1000_init_mac_params_vf;
- hw->mbx.ops.init_params = e1000_init_mbx_params_vf;
-}
-
-/**
- * e1000_get_link_up_info_vf - Gets link info.
- * @hw: pointer to the HW structure
- * @speed: pointer to 16 bit value to store link speed.
- * @duplex: pointer to 16 bit value to store duplex.
- *
- * Since we cannot read the PHY and get accurate link info, we must rely upon
- * the status register's data which is often stale and inaccurate.
- **/
-static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed,
- u16 *duplex)
-{
- s32 status;
-
- status = er32(STATUS);
- if (status & E1000_STATUS_SPEED_1000)
- *speed = SPEED_1000;
- else if (status & E1000_STATUS_SPEED_100)
- *speed = SPEED_100;
- else
- *speed = SPEED_10;
-
- if (status & E1000_STATUS_FD)
- *duplex = FULL_DUPLEX;
- else
- *duplex = HALF_DUPLEX;
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_reset_hw_vf - Resets the HW
- * @hw: pointer to the HW structure
- *
- * VF's provide a function level reset. This is done using bit 26 of ctrl_reg.
- * This is all the reset we can perform on a VF.
- **/
-static s32 e1000_reset_hw_vf(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- u32 timeout = E1000_VF_INIT_TIMEOUT;
- u32 ret_val = -E1000_ERR_MAC_INIT;
- u32 msgbuf[3];
- u8 *addr = (u8 *)(&msgbuf[1]);
- u32 ctrl;
-
- /* assert vf queue/interrupt reset */
- ctrl = er32(CTRL);
- ew32(CTRL, ctrl | E1000_CTRL_RST);
-
- /* we cannot initialize while the RSTI / RSTD bits are asserted */
- while (!mbx->ops.check_for_rst(hw) && timeout) {
- timeout--;
- udelay(5);
- }
-
- if (timeout) {
- /* mailbox timeout can now become active */
- mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT;
-
- /* notify pf of vf reset completion */
- msgbuf[0] = E1000_VF_RESET;
- mbx->ops.write_posted(hw, msgbuf, 1);
-
- msleep(10);
-
- /* set our "perm_addr" based on info provided by PF */
- ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
- if (!ret_val) {
- if (msgbuf[0] == (E1000_VF_RESET | E1000_VT_MSGTYPE_ACK))
- memcpy(hw->mac.perm_addr, addr, 6);
- else
- ret_val = -E1000_ERR_MAC_INIT;
- }
- }
-
- return ret_val;
-}
-
-/**
- * e1000_init_hw_vf - Inits the HW
- * @hw: pointer to the HW structure
- *
- * Not much to do here except clear the PF Reset indication if there is one.
- **/
-static s32 e1000_init_hw_vf(struct e1000_hw *hw)
-{
- /* attempt to set and restore our mac address */
- e1000_rar_set_vf(hw, hw->mac.addr, 0);
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_hash_mc_addr_vf - Generate a multicast hash value
- * @hw: pointer to the HW structure
- * @mc_addr: pointer to a multicast address
- *
- * Generates a multicast address hash value which is used to determine
- * the multicast filter table array address and new table value. See
- * e1000_mta_set_generic()
- **/
-static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr)
-{
- u32 hash_value, hash_mask;
- u8 bit_shift = 0;
-
- /* Register count multiplied by bits per register */
- hash_mask = (hw->mac.mta_reg_count * 32) - 1;
-
- /*
- * The bit_shift is the number of left-shifts
- * where 0xFF would still fall within the hash mask.
- */
- while (hash_mask >> bit_shift != 0xFF)
- bit_shift++;
-
- hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) |
- (((u16) mc_addr[5]) << bit_shift)));
-
- return hash_value;
-}
-
-/**
- * e1000_update_mc_addr_list_vf - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @mc_addr_list: array of multicast addresses to program
- * @mc_addr_count: number of multicast addresses to program
- * @rar_used_count: the first RAR register free to program
- * @rar_count: total number of supported Receive Address Registers
- *
- * Updates the Receive Address Registers and Multicast Table Array.
- * The caller must have a packed mc_addr_list of multicast addresses.
- * The parameter rar_count will usually be hw->mac.rar_entry_count
- * unless there are workarounds that change this.
- **/
-static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw,
- u8 *mc_addr_list, u32 mc_addr_count,
- u32 rar_used_count, u32 rar_count)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[E1000_VFMAILBOX_SIZE];
- u16 *hash_list = (u16 *)&msgbuf[1];
- u32 hash_value;
- u32 cnt, i;
-
- /* Each entry in the list uses 1 16 bit word. We have 30
- * 16 bit words available in our HW msg buffer (minus 1 for the
- * msg type). That's 30 hash values if we pack 'em right. If
- * there are more than 30 MC addresses to add then punt the
- * extras for now and then add code to handle more than 30 later.
- * It would be unusual for a server to request that many multi-cast
- * addresses except for in large enterprise network environments.
- */
-
- cnt = (mc_addr_count > 30) ? 30 : mc_addr_count;
- msgbuf[0] = E1000_VF_SET_MULTICAST;
- msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT;
-
- for (i = 0; i < cnt; i++) {
- hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list);
- hash_list[i] = hash_value & 0x0FFFF;
- mc_addr_list += ETH_ADDR_LEN;
- }
-
- mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE);
-}
-
-/**
- * e1000_set_vfta_vf - Set/Unset vlan filter table address
- * @hw: pointer to the HW structure
- * @vid: determines the vfta register and bit to set/unset
- * @set: if true then set bit, else clear bit
- **/
-static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[2];
- s32 err;
-
- msgbuf[0] = E1000_VF_SET_VLAN;
- msgbuf[1] = vid;
- /* Setting the 8 bit field MSG INFO to true indicates "add" */
- if (set)
- msgbuf[0] |= 1 << E1000_VT_MSGINFO_SHIFT;
-
- mbx->ops.write_posted(hw, msgbuf, 2);
-
- err = mbx->ops.read_posted(hw, msgbuf, 2);
-
- msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
-
- /* if nacked the vlan was rejected */
- if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK)))
- err = -E1000_ERR_MAC_INIT;
-
- return err;
-}
-
-/** e1000_rlpml_set_vf - Set the maximum receive packet length
- * @hw: pointer to the HW structure
- * @max_size: value to assign to max frame size
- **/
-void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[2];
-
- msgbuf[0] = E1000_VF_SET_LPE;
- msgbuf[1] = max_size;
-
- mbx->ops.write_posted(hw, msgbuf, 2);
-}
-
-/**
- * e1000_rar_set_vf - set device MAC address
- * @hw: pointer to the HW structure
- * @addr: pointer to the receive address
- * @index receive address array register
- **/
-static void e1000_rar_set_vf(struct e1000_hw *hw, u8 * addr, u32 index)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[3];
- u8 *msg_addr = (u8 *)(&msgbuf[1]);
- s32 ret_val;
-
- memset(msgbuf, 0, 12);
- msgbuf[0] = E1000_VF_SET_MAC_ADDR;
- memcpy(msg_addr, addr, 6);
- ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
-
- if (!ret_val)
- ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
-
- msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS;
-
- /* if nacked the address was rejected, use "perm_addr" */
- if (!ret_val &&
- (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK)))
- e1000_read_mac_addr_vf(hw);
-}
-
-/**
- * e1000_read_mac_addr_vf - Read device MAC address
- * @hw: pointer to the HW structure
- **/
-static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw)
-{
- int i;
-
- for (i = 0; i < ETH_ADDR_LEN; i++)
- hw->mac.addr[i] = hw->mac.perm_addr[i];
-
- return E1000_SUCCESS;
-}
-
-/**
- * e1000_check_for_link_vf - Check for link for a virtual interface
- * @hw: pointer to the HW structure
- *
- * Checks to see if the underlying PF is still talking to the VF and
- * if it is then it reports the link state to the hardware, otherwise
- * it reports link down and returns an error.
- **/
-static s32 e1000_check_for_link_vf(struct e1000_hw *hw)
-{
- struct e1000_mbx_info *mbx = &hw->mbx;
- struct e1000_mac_info *mac = &hw->mac;
- s32 ret_val = E1000_SUCCESS;
- u32 in_msg = 0;
-
- /*
- * We only want to run this if there has been a rst asserted.
- * in this case that could mean a link change, device reset,
- * or a virtual function reset
- */
-
- /* If we were hit with a reset or timeout drop the link */
- if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
- mac->get_link_status = true;
-
- if (!mac->get_link_status)
- goto out;
-
- /* if link status is down no point in checking to see if pf is up */
- if (!(er32(STATUS) & E1000_STATUS_LU))
- goto out;
-
- /* if the read failed it could just be a mailbox collision, best wait
- * until we are called again and don't report an error */
- if (mbx->ops.read(hw, &in_msg, 1))
- goto out;
-
- /* if incoming message isn't clear to send we are waiting on response */
- if (!(in_msg & E1000_VT_MSGTYPE_CTS)) {
- /* message is not CTS and is NACK we must have lost CTS status */
- if (in_msg & E1000_VT_MSGTYPE_NACK)
- ret_val = -E1000_ERR_MAC_INIT;
- goto out;
- }
-
- /* the pf is talking, if we timed out in the past we reinit */
- if (!mbx->timeout) {
- ret_val = -E1000_ERR_MAC_INIT;
- goto out;
- }
-
- /* if we passed all the tests above then the link is up and we no
- * longer need to check for link */
- mac->get_link_status = false;
-
-out:
- return ret_val;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel(R) 82576 Virtual Function Linux driver
- Copyright(c) 2009 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _E1000_VF_H_
-#define _E1000_VF_H_
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-
-#include "regs.h"
-#include "defines.h"
-
-struct e1000_hw;
-
-#define E1000_DEV_ID_82576_VF 0x10CA
-#define E1000_DEV_ID_I350_VF 0x1520
-#define E1000_REVISION_0 0
-#define E1000_REVISION_1 1
-#define E1000_REVISION_2 2
-#define E1000_REVISION_3 3
-#define E1000_REVISION_4 4
-
-#define E1000_FUNC_0 0
-#define E1000_FUNC_1 1
-
-/*
- * Receive Address Register Count
- * Number of high/low register pairs in the RAR. The RAR (Receive Address
- * Registers) holds the directed and multicast addresses that we monitor.
- * These entries are also used for MAC-based filtering.
- */
-#define E1000_RAR_ENTRIES_VF 1
-
-/* Receive Descriptor - Advanced */
-union e1000_adv_rx_desc {
- struct {
- u64 pkt_addr; /* Packet buffer address */
- u64 hdr_addr; /* Header buffer address */
- } read;
- struct {
- struct {
- union {
- u32 data;
- struct {
- u16 pkt_info; /* RSS/Packet type */
- u16 hdr_info; /* Split Header,
- * hdr buffer length */
- } hs_rss;
- } lo_dword;
- union {
- u32 rss; /* RSS Hash */
- struct {
- u16 ip_id; /* IP id */
- u16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- u32 status_error; /* ext status/error */
- u16 length; /* Packet length */
- u16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0
-#define E1000_RXDADV_HDRBUFLEN_SHIFT 5
-
-/* Transmit Descriptor - Advanced */
-union e1000_adv_tx_desc {
- struct {
- u64 buffer_addr; /* Address of descriptor's data buf */
- u32 cmd_type_len;
- u32 olinfo_status;
- } read;
- struct {
- u64 rsvd; /* Reserved */
- u32 nxtseq_seed;
- u32 status;
- } wb;
-};
-
-/* Adv Transmit Descriptor Config Masks */
-#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */
-#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
-#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */
-#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */
-#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */
-#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */
-#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
-#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
-
-/* Context descriptors */
-struct e1000_adv_tx_context_desc {
- u32 vlan_macip_lens;
- u32 seqnum_seed;
- u32 type_tucmd_mlhl;
- u32 mss_l4len_idx;
-};
-
-#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
-
-enum e1000_mac_type {
- e1000_undefined = 0,
- e1000_vfadapt,
- e1000_vfadapt_i350,
- e1000_num_macs /* List is 1-based, so subtract 1 for true count. */
-};
-
-struct e1000_vf_stats {
- u64 base_gprc;
- u64 base_gptc;
- u64 base_gorc;
- u64 base_gotc;
- u64 base_mprc;
- u64 base_gotlbc;
- u64 base_gptlbc;
- u64 base_gorlbc;
- u64 base_gprlbc;
-
- u32 last_gprc;
- u32 last_gptc;
- u32 last_gorc;
- u32 last_gotc;
- u32 last_mprc;
- u32 last_gotlbc;
- u32 last_gptlbc;
- u32 last_gorlbc;
- u32 last_gprlbc;
-
- u64 gprc;
- u64 gptc;
- u64 gorc;
- u64 gotc;
- u64 mprc;
- u64 gotlbc;
- u64 gptlbc;
- u64 gorlbc;
- u64 gprlbc;
-};
-
-#include "mbx.h"
-
-struct e1000_mac_operations {
- /* Function pointers for the MAC. */
- s32 (*init_params)(struct e1000_hw *);
- s32 (*check_for_link)(struct e1000_hw *);
- void (*clear_vfta)(struct e1000_hw *);
- s32 (*get_bus_info)(struct e1000_hw *);
- s32 (*get_link_up_info)(struct e1000_hw *, u16 *, u16 *);
- void (*update_mc_addr_list)(struct e1000_hw *, u8 *, u32, u32, u32);
- s32 (*reset_hw)(struct e1000_hw *);
- s32 (*init_hw)(struct e1000_hw *);
- s32 (*setup_link)(struct e1000_hw *);
- void (*write_vfta)(struct e1000_hw *, u32, u32);
- void (*mta_set)(struct e1000_hw *, u32);
- void (*rar_set)(struct e1000_hw *, u8*, u32);
- s32 (*read_mac_addr)(struct e1000_hw *);
- s32 (*set_vfta)(struct e1000_hw *, u16, bool);
-};
-
-struct e1000_mac_info {
- struct e1000_mac_operations ops;
- u8 addr[6];
- u8 perm_addr[6];
-
- enum e1000_mac_type type;
-
- u16 mta_reg_count;
- u16 rar_entry_count;
-
- bool get_link_status;
-};
-
-struct e1000_mbx_operations {
- s32 (*init_params)(struct e1000_hw *hw);
- s32 (*read)(struct e1000_hw *, u32 *, u16);
- s32 (*write)(struct e1000_hw *, u32 *, u16);
- s32 (*read_posted)(struct e1000_hw *, u32 *, u16);
- s32 (*write_posted)(struct e1000_hw *, u32 *, u16);
- s32 (*check_for_msg)(struct e1000_hw *);
- s32 (*check_for_ack)(struct e1000_hw *);
- s32 (*check_for_rst)(struct e1000_hw *);
-};
-
-struct e1000_mbx_stats {
- u32 msgs_tx;
- u32 msgs_rx;
-
- u32 acks;
- u32 reqs;
- u32 rsts;
-};
-
-struct e1000_mbx_info {
- struct e1000_mbx_operations ops;
- struct e1000_mbx_stats stats;
- u32 timeout;
- u32 usec_delay;
- u16 size;
-};
-
-struct e1000_dev_spec_vf {
- u32 vf_number;
- u32 v2p_mailbox;
-};
-
-struct e1000_hw {
- void *back;
-
- u8 __iomem *hw_addr;
- u8 __iomem *flash_address;
- unsigned long io_base;
-
- struct e1000_mac_info mac;
- struct e1000_mbx_info mbx;
-
- union {
- struct e1000_dev_spec_vf vf;
- } dev_spec;
-
- u16 device_id;
- u16 subsystem_vendor_id;
- u16 subsystem_device_id;
- u16 vendor_id;
-
- u8 revision_id;
-};
-
-/* These functions must be implemented by drivers */
-void e1000_rlpml_set_vf(struct e1000_hw *, u16);
-void e1000_init_function_pointers_vf(struct e1000_hw *hw);
-
-
-#endif /* _E1000_VF_H_ */
+++ /dev/null
-################################################################################
-#
-# Intel PRO/10GbE Linux driver
-# Copyright(c) 1999 - 2008 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# Linux NICS <linux.nics@intel.com>
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) PRO/10GbE ethernet driver
-#
-
-obj-$(CONFIG_IXGB) += ixgb.o
-
-ixgb-objs := ixgb_main.o ixgb_hw.o ixgb_ee.o ixgb_ethtool.o ixgb_param.o
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGB_H_
-#define _IXGB_H_
-
-#include <linux/stddef.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/interrupt.h>
-#include <linux/string.h>
-#include <linux/pagemap.h>
-#include <linux/dma-mapping.h>
-#include <linux/bitops.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <linux/capability.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/udp.h>
-#include <net/pkt_sched.h>
-#include <linux/list.h>
-#include <linux/reboot.h>
-#include <net/checksum.h>
-
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-
-#define BAR_0 0
-#define BAR_1 1
-#define BAR_5 5
-
-struct ixgb_adapter;
-#include "ixgb_hw.h"
-#include "ixgb_ee.h"
-#include "ixgb_ids.h"
-
-#define PFX "ixgb: "
-
-#ifdef _DEBUG_DRIVER_
-#define IXGB_DBG(fmt, args...) printk(KERN_DEBUG PFX fmt, ##args)
-#else
-#define IXGB_DBG(fmt, args...) \
-do { \
- if (0) \
- printk(KERN_DEBUG PFX fmt, ##args); \
-} while (0)
-#endif
-
-/* TX/RX descriptor defines */
-#define DEFAULT_TXD 256
-#define MAX_TXD 4096
-#define MIN_TXD 64
-
-/* hardware cannot reliably support more than 512 descriptors owned by
- * hardware descriptor cache otherwise an unreliable ring under heavy
- * receive load may result */
-#define DEFAULT_RXD 512
-#define MAX_RXD 512
-#define MIN_RXD 64
-
-/* Supported Rx Buffer Sizes */
-#define IXGB_RXBUFFER_2048 2048
-#define IXGB_RXBUFFER_4096 4096
-#define IXGB_RXBUFFER_8192 8192
-#define IXGB_RXBUFFER_16384 16384
-
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IXGB_RX_BUFFER_WRITE 8 /* Must be power of 2 */
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct ixgb_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- u16 mapped_as_page;
-};
-
-struct ixgb_desc_ring {
- /* pointer to the descriptor ring memory */
- void *desc;
- /* physical address of the descriptor ring */
- dma_addr_t dma;
- /* length of descriptor ring in bytes */
- unsigned int size;
- /* number of descriptors in the ring */
- unsigned int count;
- /* next descriptor to associate a buffer with */
- unsigned int next_to_use;
- /* next descriptor to check for DD status bit */
- unsigned int next_to_clean;
- /* array of buffer information structs */
- struct ixgb_buffer *buffer_info;
-};
-
-#define IXGB_DESC_UNUSED(R) \
- ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
- (R)->next_to_clean - (R)->next_to_use - 1)
-
-#define IXGB_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
-#define IXGB_RX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_rx_desc)
-#define IXGB_TX_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_tx_desc)
-#define IXGB_CONTEXT_DESC(R, i) IXGB_GET_DESC(R, i, ixgb_context_desc)
-
-/* board specific private data structure */
-
-struct ixgb_adapter {
- struct timer_list watchdog_timer;
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u32 bd_number;
- u32 rx_buffer_len;
- u32 part_num;
- u16 link_speed;
- u16 link_duplex;
- struct work_struct tx_timeout_task;
-
- /* TX */
- struct ixgb_desc_ring tx_ring ____cacheline_aligned_in_smp;
- unsigned int restart_queue;
- unsigned long timeo_start;
- u32 tx_cmd_type;
- u64 hw_csum_tx_good;
- u64 hw_csum_tx_error;
- u32 tx_int_delay;
- u32 tx_timeout_count;
- bool tx_int_delay_enable;
- bool detect_tx_hung;
-
- /* RX */
- struct ixgb_desc_ring rx_ring;
- u64 hw_csum_rx_error;
- u64 hw_csum_rx_good;
- u32 rx_int_delay;
- bool rx_csum;
-
- /* OS defined structs */
- struct napi_struct napi;
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- /* structs defined in ixgb_hw.h */
- struct ixgb_hw hw;
- u16 msg_enable;
- struct ixgb_hw_stats stats;
- u32 alloc_rx_buff_failed;
- bool have_msi;
- unsigned long flags;
-};
-
-enum ixgb_state_t {
- /* TBD
- __IXGB_TESTING,
- __IXGB_RESETTING,
- */
- __IXGB_DOWN
-};
-
-/* Exported from other modules */
-extern void ixgb_check_options(struct ixgb_adapter *adapter);
-extern void ixgb_set_ethtool_ops(struct net_device *netdev);
-extern char ixgb_driver_name[];
-extern const char ixgb_driver_version[];
-
-extern int ixgb_up(struct ixgb_adapter *adapter);
-extern void ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog);
-extern void ixgb_reset(struct ixgb_adapter *adapter);
-extern int ixgb_setup_rx_resources(struct ixgb_adapter *adapter);
-extern int ixgb_setup_tx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_free_rx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_free_tx_resources(struct ixgb_adapter *adapter);
-extern void ixgb_update_stats(struct ixgb_adapter *adapter);
-
-
-#endif /* _IXGB_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "ixgb_hw.h"
-#include "ixgb_ee.h"
-/* Local prototypes */
-static u16 ixgb_shift_in_bits(struct ixgb_hw *hw);
-
-static void ixgb_shift_out_bits(struct ixgb_hw *hw,
- u16 data,
- u16 count);
-static void ixgb_standby_eeprom(struct ixgb_hw *hw);
-
-static bool ixgb_wait_eeprom_command(struct ixgb_hw *hw);
-
-static void ixgb_cleanup_eeprom(struct ixgb_hw *hw);
-
-/******************************************************************************
- * Raises the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd_reg - EECD's current value
- *****************************************************************************/
-static void
-ixgb_raise_clock(struct ixgb_hw *hw,
- u32 *eecd_reg)
-{
- /* Raise the clock input to the EEPROM (by setting the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd_reg = *eecd_reg | IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, *eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Lowers the EEPROM's clock input.
- *
- * hw - Struct containing variables accessed by shared code
- * eecd_reg - EECD's current value
- *****************************************************************************/
-static void
-ixgb_lower_clock(struct ixgb_hw *hw,
- u32 *eecd_reg)
-{
- /* Lower the clock input to the EEPROM (by clearing the SK bit), and then
- * wait 50 microseconds.
- */
- *eecd_reg = *eecd_reg & ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, *eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Shift data bits out to the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * data - data to send to the EEPROM
- * count - number of bits to shift out
- *****************************************************************************/
-static void
-ixgb_shift_out_bits(struct ixgb_hw *hw,
- u16 data,
- u16 count)
-{
- u32 eecd_reg;
- u32 mask;
-
- /* We need to shift "count" bits out to the EEPROM. So, value in the
- * "data" parameter will be shifted out to the EEPROM one bit at a time.
- * In order to do this, "data" must be broken down into bits.
- */
- mask = 0x01 << (count - 1);
- eecd_reg = IXGB_READ_REG(hw, EECD);
- eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
- do {
- /* A "1" is shifted out to the EEPROM by setting bit "DI" to a "1",
- * and then raising and then lowering the clock (the SK bit controls
- * the clock input to the EEPROM). A "0" is shifted out to the EEPROM
- * by setting "DI" to "0" and then raising and then lowering the clock.
- */
- eecd_reg &= ~IXGB_EECD_DI;
-
- if (data & mask)
- eecd_reg |= IXGB_EECD_DI;
-
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
-
- udelay(50);
-
- ixgb_raise_clock(hw, &eecd_reg);
- ixgb_lower_clock(hw, &eecd_reg);
-
- mask = mask >> 1;
-
- } while (mask);
-
- /* We leave the "DI" bit set to "0" when we leave this routine. */
- eecd_reg &= ~IXGB_EECD_DI;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-}
-
-/******************************************************************************
- * Shift data bits in from the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static u16
-ixgb_shift_in_bits(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
- u32 i;
- u16 data;
-
- /* In order to read a register from the EEPROM, we need to shift 16 bits
- * in from the EEPROM. Bits are "shifted in" by raising the clock input to
- * the EEPROM (setting the SK bit), and then reading the value of the "DO"
- * bit. During this "shifting in" process the "DI" bit should always be
- * clear..
- */
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_DO | IXGB_EECD_DI);
- data = 0;
-
- for (i = 0; i < 16; i++) {
- data = data << 1;
- ixgb_raise_clock(hw, &eecd_reg);
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_DI);
- if (eecd_reg & IXGB_EECD_DO)
- data |= 1;
-
- ixgb_lower_clock(hw, &eecd_reg);
- }
-
- return data;
-}
-
-/******************************************************************************
- * Prepares EEPROM for access
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Lowers EEPROM clock. Clears input pin. Sets the chip select pin. This
- * function should be called before issuing a command to the EEPROM.
- *****************************************************************************/
-static void
-ixgb_setup_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Clear SK and DI */
- eecd_reg &= ~(IXGB_EECD_SK | IXGB_EECD_DI);
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-
- /* Set CS */
- eecd_reg |= IXGB_EECD_CS;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-}
-
-/******************************************************************************
- * Returns EEPROM to a "standby" state
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_standby_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Deselect EEPROM */
- eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_SK);
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Clock high */
- eecd_reg |= IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Select EEPROM */
- eecd_reg |= IXGB_EECD_CS;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Clock low */
- eecd_reg &= ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Raises then lowers the EEPROM's clock pin
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clock_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- /* Rising edge of clock */
- eecd_reg |= IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-
- /* Falling edge of clock */
- eecd_reg &= ~IXGB_EECD_SK;
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
- IXGB_WRITE_FLUSH(hw);
- udelay(50);
-}
-
-/******************************************************************************
- * Terminates a command by lowering the EEPROM's chip select pin
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_cleanup_eeprom(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
-
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- eecd_reg &= ~(IXGB_EECD_CS | IXGB_EECD_DI);
-
- IXGB_WRITE_REG(hw, EECD, eecd_reg);
-
- ixgb_clock_eeprom(hw);
-}
-
-/******************************************************************************
- * Waits for the EEPROM to finish the current command.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * The command is done when the EEPROM's data out pin goes high.
- *
- * Returns:
- * true: EEPROM data pin is high before timeout.
- * false: Time expired.
- *****************************************************************************/
-static bool
-ixgb_wait_eeprom_command(struct ixgb_hw *hw)
-{
- u32 eecd_reg;
- u32 i;
-
- /* Toggle the CS line. This in effect tells to EEPROM to actually execute
- * the command in question.
- */
- ixgb_standby_eeprom(hw);
-
- /* Now read DO repeatedly until is high (equal to '1'). The EEPROM will
- * signal that the command has been completed by raising the DO signal.
- * If DO does not go high in 10 milliseconds, then error out.
- */
- for (i = 0; i < 200; i++) {
- eecd_reg = IXGB_READ_REG(hw, EECD);
-
- if (eecd_reg & IXGB_EECD_DO)
- return true;
-
- udelay(50);
- }
- ASSERT(0);
- return false;
-}
-
-/******************************************************************************
- * Verifies that the EEPROM has a valid checksum
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Reads the first 64 16 bit words of the EEPROM and sums the values read.
- * If the sum of the 64 16 bit words is 0xBABA, the EEPROM's checksum is
- * valid.
- *
- * Returns:
- * true: Checksum is valid
- * false: Checksum is not valid.
- *****************************************************************************/
-bool
-ixgb_validate_eeprom_checksum(struct ixgb_hw *hw)
-{
- u16 checksum = 0;
- u16 i;
-
- for (i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++)
- checksum += ixgb_read_eeprom(hw, i);
-
- if (checksum == (u16) EEPROM_SUM)
- return true;
- else
- return false;
-}
-
-/******************************************************************************
- * Calculates the EEPROM checksum and writes it to the EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Sums the first 63 16 bit words of the EEPROM. Subtracts the sum from 0xBABA.
- * Writes the difference to word offset 63 of the EEPROM.
- *****************************************************************************/
-void
-ixgb_update_eeprom_checksum(struct ixgb_hw *hw)
-{
- u16 checksum = 0;
- u16 i;
-
- for (i = 0; i < EEPROM_CHECKSUM_REG; i++)
- checksum += ixgb_read_eeprom(hw, i);
-
- checksum = (u16) EEPROM_SUM - checksum;
-
- ixgb_write_eeprom(hw, EEPROM_CHECKSUM_REG, checksum);
-}
-
-/******************************************************************************
- * Writes a 16 bit word to a given offset in the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * reg - offset within the EEPROM to be written to
- * data - 16 bit word to be written to the EEPROM
- *
- * If ixgb_update_eeprom_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- *
- *****************************************************************************/
-void
-ixgb_write_eeprom(struct ixgb_hw *hw, u16 offset, u16 data)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- /* Prepare the EEPROM for writing */
- ixgb_setup_eeprom(hw);
-
- /* Send the 9-bit EWEN (write enable) command to the EEPROM (5-bit opcode
- * plus 4-bit dummy). This puts the EEPROM into write/erase mode.
- */
- ixgb_shift_out_bits(hw, EEPROM_EWEN_OPCODE, 5);
- ixgb_shift_out_bits(hw, 0, 4);
-
- /* Prepare the EEPROM */
- ixgb_standby_eeprom(hw);
-
- /* Send the Write command (3-bit opcode + 6-bit addr) */
- ixgb_shift_out_bits(hw, EEPROM_WRITE_OPCODE, 3);
- ixgb_shift_out_bits(hw, offset, 6);
-
- /* Send the data */
- ixgb_shift_out_bits(hw, data, 16);
-
- ixgb_wait_eeprom_command(hw);
-
- /* Recover from write */
- ixgb_standby_eeprom(hw);
-
- /* Send the 9-bit EWDS (write disable) command to the EEPROM (5-bit
- * opcode plus 4-bit dummy). This takes the EEPROM out of write/erase
- * mode.
- */
- ixgb_shift_out_bits(hw, EEPROM_EWDS_OPCODE, 5);
- ixgb_shift_out_bits(hw, 0, 4);
-
- /* Done with writing */
- ixgb_cleanup_eeprom(hw);
-
- /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */
- ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
-}
-
-/******************************************************************************
- * Reads a 16 bit word from the EEPROM.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - offset of 16 bit word in the EEPROM to read
- *
- * Returns:
- * The 16-bit value read from the eeprom
- *****************************************************************************/
-u16
-ixgb_read_eeprom(struct ixgb_hw *hw,
- u16 offset)
-{
- u16 data;
-
- /* Prepare the EEPROM for reading */
- ixgb_setup_eeprom(hw);
-
- /* Send the READ command (opcode + addr) */
- ixgb_shift_out_bits(hw, EEPROM_READ_OPCODE, 3);
- /*
- * We have a 64 word EEPROM, there are 6 address bits
- */
- ixgb_shift_out_bits(hw, offset, 6);
-
- /* Read the data */
- data = ixgb_shift_in_bits(hw);
-
- /* End this read operation */
- ixgb_standby_eeprom(hw);
-
- return data;
-}
-
-/******************************************************************************
- * Reads eeprom and stores data in shared structure.
- * Validates eeprom checksum and eeprom signature.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * true: if eeprom read is successful
- * false: otherwise.
- *****************************************************************************/
-bool
-ixgb_get_eeprom_data(struct ixgb_hw *hw)
-{
- u16 i;
- u16 checksum = 0;
- struct ixgb_ee_map_type *ee_map;
-
- ENTER();
-
- ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- pr_debug("Reading eeprom data\n");
- for (i = 0; i < IXGB_EEPROM_SIZE ; i++) {
- u16 ee_data;
- ee_data = ixgb_read_eeprom(hw, i);
- checksum += ee_data;
- hw->eeprom[i] = cpu_to_le16(ee_data);
- }
-
- if (checksum != (u16) EEPROM_SUM) {
- pr_debug("Checksum invalid\n");
- /* clear the init_ctrl_reg_1 to signify that the cache is
- * invalidated */
- ee_map->init_ctrl_reg_1 = cpu_to_le16(EEPROM_ICW1_SIGNATURE_CLEAR);
- return false;
- }
-
- if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
- != cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- pr_debug("Signature invalid\n");
- return false;
- }
-
- return true;
-}
-
-/******************************************************************************
- * Local function to check if the eeprom signature is good
- * If the eeprom signature is good, calls ixgb)get_eeprom_data.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * true: eeprom signature was good and the eeprom read was successful
- * false: otherwise.
- ******************************************************************************/
-static bool
-ixgb_check_and_get_eeprom_data (struct ixgb_hw* hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if ((ee_map->init_ctrl_reg_1 & cpu_to_le16(EEPROM_ICW1_SIGNATURE_MASK))
- == cpu_to_le16(EEPROM_ICW1_SIGNATURE_VALID)) {
- return true;
- } else {
- return ixgb_get_eeprom_data(hw);
- }
-}
-
-/******************************************************************************
- * return a word from the eeprom
- *
- * hw - Struct containing variables accessed by shared code
- * index - Offset of eeprom word
- *
- * Returns:
- * Word at indexed offset in eeprom, if valid, 0 otherwise.
- ******************************************************************************/
-__le16
-ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index)
-{
-
- if ((index < IXGB_EEPROM_SIZE) &&
- (ixgb_check_and_get_eeprom_data(hw) == true)) {
- return hw->eeprom[index];
- }
-
- return 0;
-}
-
-/******************************************************************************
- * return the mac address from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- * mac_addr - Ethernet Address if EEPROM contents are valid, 0 otherwise
- *
- * Returns: None.
- ******************************************************************************/
-void
-ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
- u8 *mac_addr)
-{
- int i;
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- ENTER();
-
- if (ixgb_check_and_get_eeprom_data(hw) == true) {
- for (i = 0; i < IXGB_ETH_LENGTH_OF_ADDRESS; i++) {
- mac_addr[i] = ee_map->mac_addr[i];
- }
- pr_debug("eeprom mac address = %pM\n", mac_addr);
- }
-}
-
-
-/******************************************************************************
- * return the Printed Board Assembly number from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * PBA number if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-u32
-ixgb_get_ee_pba_number(struct ixgb_hw *hw)
-{
- if (ixgb_check_and_get_eeprom_data(hw) == true)
- return le16_to_cpu(hw->eeprom[EEPROM_PBA_1_2_REG])
- | (le16_to_cpu(hw->eeprom[EEPROM_PBA_3_4_REG])<<16);
-
- return 0;
-}
-
-
-/******************************************************************************
- * return the Device Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- * Device Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-u16
-ixgb_get_ee_device_id(struct ixgb_hw *hw)
-{
- struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
- if (ixgb_check_and_get_eeprom_data(hw) == true)
- return le16_to_cpu(ee_map->device_id);
-
- return 0;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGB_EE_H_
-#define _IXGB_EE_H_
-
-#define IXGB_EEPROM_SIZE 64 /* Size in words */
-
-#define IXGB_ETH_LENGTH_OF_ADDRESS 6
-
-/* EEPROM Commands */
-#define EEPROM_READ_OPCODE 0x6 /* EEPROM read opcode */
-#define EEPROM_WRITE_OPCODE 0x5 /* EEPROM write opcode */
-#define EEPROM_ERASE_OPCODE 0x7 /* EEPROM erase opcode */
-#define EEPROM_EWEN_OPCODE 0x13 /* EEPROM erase/write enable */
-#define EEPROM_EWDS_OPCODE 0x10 /* EEPROM erase/write disable */
-
-/* EEPROM MAP (Word Offsets) */
-#define EEPROM_IA_1_2_REG 0x0000
-#define EEPROM_IA_3_4_REG 0x0001
-#define EEPROM_IA_5_6_REG 0x0002
-#define EEPROM_COMPATIBILITY_REG 0x0003
-#define EEPROM_PBA_1_2_REG 0x0008
-#define EEPROM_PBA_3_4_REG 0x0009
-#define EEPROM_INIT_CONTROL1_REG 0x000A
-#define EEPROM_SUBSYS_ID_REG 0x000B
-#define EEPROM_SUBVEND_ID_REG 0x000C
-#define EEPROM_DEVICE_ID_REG 0x000D
-#define EEPROM_VENDOR_ID_REG 0x000E
-#define EEPROM_INIT_CONTROL2_REG 0x000F
-#define EEPROM_SWDPINS_REG 0x0020
-#define EEPROM_CIRCUIT_CTRL_REG 0x0021
-#define EEPROM_D0_D3_POWER_REG 0x0022
-#define EEPROM_FLASH_VERSION 0x0032
-#define EEPROM_CHECKSUM_REG 0x003F
-
-/* Mask bits for fields in Word 0x0a of the EEPROM */
-
-#define EEPROM_ICW1_SIGNATURE_MASK 0xC000
-#define EEPROM_ICW1_SIGNATURE_VALID 0x4000
-#define EEPROM_ICW1_SIGNATURE_CLEAR 0x0000
-
-/* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
-#define EEPROM_SUM 0xBABA
-
-/* EEPROM Map Sizes (Byte Counts) */
-#define PBA_SIZE 4
-
-/* EEPROM Map defines (WORD OFFSETS)*/
-
-/* EEPROM structure */
-struct ixgb_ee_map_type {
- u8 mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS];
- __le16 compatibility;
- __le16 reserved1[4];
- __le32 pba_number;
- __le16 init_ctrl_reg_1;
- __le16 subsystem_id;
- __le16 subvendor_id;
- __le16 device_id;
- __le16 vendor_id;
- __le16 init_ctrl_reg_2;
- __le16 oem_reserved[16];
- __le16 swdpins_reg;
- __le16 circuit_ctrl_reg;
- u8 d3_power;
- u8 d0_power;
- __le16 reserved2[28];
- __le16 checksum;
-};
-
-/* EEPROM Functions */
-u16 ixgb_read_eeprom(struct ixgb_hw *hw, u16 reg);
-
-bool ixgb_validate_eeprom_checksum(struct ixgb_hw *hw);
-
-void ixgb_update_eeprom_checksum(struct ixgb_hw *hw);
-
-void ixgb_write_eeprom(struct ixgb_hw *hw, u16 reg, u16 data);
-
-#endif /* IXGB_EE_H */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for ixgb */
-
-#include "ixgb.h"
-
-#include <asm/uaccess.h>
-
-#define IXGB_ALL_RAR_ENTRIES 16
-
-enum {NETDEV_STATS, IXGB_STATS};
-
-struct ixgb_stats {
- char stat_string[ETH_GSTRING_LEN];
- int type;
- int sizeof_stat;
- int stat_offset;
-};
-
-#define IXGB_STAT(m) IXGB_STATS, \
- FIELD_SIZEOF(struct ixgb_adapter, m), \
- offsetof(struct ixgb_adapter, m)
-#define IXGB_NETDEV_STAT(m) NETDEV_STATS, \
- FIELD_SIZEOF(struct net_device, m), \
- offsetof(struct net_device, m)
-
-static struct ixgb_stats ixgb_gstrings_stats[] = {
- {"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
- {"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
- {"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
- {"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
- {"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
- {"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
- {"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
- {"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
- {"multicast", IXGB_NETDEV_STAT(stats.multicast)},
- {"collisions", IXGB_NETDEV_STAT(stats.collisions)},
-
-/* { "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) }, */
- {"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
- {"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
- {"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
- {"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
- {"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
- {"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
- {"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
- {"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
- {"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
- {"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
- {"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
- {"tx_deferred_ok", IXGB_STAT(stats.dc)},
- {"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
- {"tx_restart_queue", IXGB_STAT(restart_queue) },
- {"rx_long_length_errors", IXGB_STAT(stats.roc)},
- {"rx_short_length_errors", IXGB_STAT(stats.ruc)},
- {"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)},
- {"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)},
- {"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)},
- {"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)},
- {"tx_flow_control_xon", IXGB_STAT(stats.xontxc)},
- {"tx_flow_control_xoff", IXGB_STAT(stats.xofftxc)},
- {"rx_csum_offload_good", IXGB_STAT(hw_csum_rx_good)},
- {"rx_csum_offload_errors", IXGB_STAT(hw_csum_rx_error)},
- {"tx_csum_offload_good", IXGB_STAT(hw_csum_tx_good)},
- {"tx_csum_offload_errors", IXGB_STAT(hw_csum_tx_error)}
-};
-
-#define IXGB_STATS_LEN ARRAY_SIZE(ixgb_gstrings_stats)
-
-static int
-ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
- ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- ecmd->transceiver = XCVR_EXTERNAL;
-
- if (netif_carrier_ok(adapter->netdev)) {
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- ecmd->autoneg = AUTONEG_DISABLE;
- return 0;
-}
-
-static void ixgb_set_speed_duplex(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- /* be optimistic about our link, since we were up before */
- adapter->link_speed = 10000;
- adapter->link_duplex = FULL_DUPLEX;
- netif_carrier_on(netdev);
- netif_wake_queue(netdev);
-}
-
-static int
-ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 speed = ethtool_cmd_speed(ecmd);
-
- if (ecmd->autoneg == AUTONEG_ENABLE ||
- (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
- return -EINVAL;
-
- if (netif_running(adapter->netdev)) {
- ixgb_down(adapter, true);
- ixgb_reset(adapter);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
-
- return 0;
-}
-
-static void
-ixgb_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
-
- pause->autoneg = AUTONEG_DISABLE;
-
- if (hw->fc.type == ixgb_fc_rx_pause)
- pause->rx_pause = 1;
- else if (hw->fc.type == ixgb_fc_tx_pause)
- pause->tx_pause = 1;
- else if (hw->fc.type == ixgb_fc_full) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
- }
-}
-
-static int
-ixgb_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
-
- if (pause->autoneg == AUTONEG_ENABLE)
- return -EINVAL;
-
- if (pause->rx_pause && pause->tx_pause)
- hw->fc.type = ixgb_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- hw->fc.type = ixgb_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- hw->fc.type = ixgb_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- hw->fc.type = ixgb_fc_none;
-
- if (netif_running(adapter->netdev)) {
- ixgb_down(adapter, true);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
-
- return 0;
-}
-
-static u32
-ixgb_get_rx_csum(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- return adapter->rx_csum;
-}
-
-static int
-ixgb_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- adapter->rx_csum = data;
-
- if (netif_running(netdev)) {
- ixgb_down(adapter, true);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
- return 0;
-}
-
-static u32
-ixgb_get_tx_csum(struct net_device *netdev)
-{
- return (netdev->features & NETIF_F_HW_CSUM) != 0;
-}
-
-static int
-ixgb_set_tx_csum(struct net_device *netdev, u32 data)
-{
- if (data)
- netdev->features |= NETIF_F_HW_CSUM;
- else
- netdev->features &= ~NETIF_F_HW_CSUM;
-
- return 0;
-}
-
-static int
-ixgb_set_tso(struct net_device *netdev, u32 data)
-{
- if (data)
- netdev->features |= NETIF_F_TSO;
- else
- netdev->features &= ~NETIF_F_TSO;
- return 0;
-}
-
-static u32
-ixgb_get_msglevel(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void
-ixgb_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-#define IXGB_GET_STAT(_A_, _R_) _A_->stats._R_
-
-static int
-ixgb_get_regs_len(struct net_device *netdev)
-{
-#define IXGB_REG_DUMP_LEN 136*sizeof(u32)
- return IXGB_REG_DUMP_LEN;
-}
-
-static void
-ixgb_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u32 *reg = p;
- u32 *reg_start = reg;
- u8 i;
-
- /* the 1 (one) below indicates an attempt at versioning, if the
- * interface in ethtool or the driver changes, this 1 should be
- * incremented */
- regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
-
- /* General Registers */
- *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */
- *reg++ = IXGB_READ_REG(hw, CTRL1); /* 1 */
- *reg++ = IXGB_READ_REG(hw, STATUS); /* 2 */
- *reg++ = IXGB_READ_REG(hw, EECD); /* 3 */
- *reg++ = IXGB_READ_REG(hw, MFS); /* 4 */
-
- /* Interrupt */
- *reg++ = IXGB_READ_REG(hw, ICR); /* 5 */
- *reg++ = IXGB_READ_REG(hw, ICS); /* 6 */
- *reg++ = IXGB_READ_REG(hw, IMS); /* 7 */
- *reg++ = IXGB_READ_REG(hw, IMC); /* 8 */
-
- /* Receive */
- *reg++ = IXGB_READ_REG(hw, RCTL); /* 9 */
- *reg++ = IXGB_READ_REG(hw, FCRTL); /* 10 */
- *reg++ = IXGB_READ_REG(hw, FCRTH); /* 11 */
- *reg++ = IXGB_READ_REG(hw, RDBAL); /* 12 */
- *reg++ = IXGB_READ_REG(hw, RDBAH); /* 13 */
- *reg++ = IXGB_READ_REG(hw, RDLEN); /* 14 */
- *reg++ = IXGB_READ_REG(hw, RDH); /* 15 */
- *reg++ = IXGB_READ_REG(hw, RDT); /* 16 */
- *reg++ = IXGB_READ_REG(hw, RDTR); /* 17 */
- *reg++ = IXGB_READ_REG(hw, RXDCTL); /* 18 */
- *reg++ = IXGB_READ_REG(hw, RAIDC); /* 19 */
- *reg++ = IXGB_READ_REG(hw, RXCSUM); /* 20 */
-
- /* there are 16 RAR entries in hardware, we only use 3 */
- for (i = 0; i < IXGB_ALL_RAR_ENTRIES; i++) {
- *reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
- *reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
- }
-
- /* Transmit */
- *reg++ = IXGB_READ_REG(hw, TCTL); /* 53 */
- *reg++ = IXGB_READ_REG(hw, TDBAL); /* 54 */
- *reg++ = IXGB_READ_REG(hw, TDBAH); /* 55 */
- *reg++ = IXGB_READ_REG(hw, TDLEN); /* 56 */
- *reg++ = IXGB_READ_REG(hw, TDH); /* 57 */
- *reg++ = IXGB_READ_REG(hw, TDT); /* 58 */
- *reg++ = IXGB_READ_REG(hw, TIDV); /* 59 */
- *reg++ = IXGB_READ_REG(hw, TXDCTL); /* 60 */
- *reg++ = IXGB_READ_REG(hw, TSPMT); /* 61 */
- *reg++ = IXGB_READ_REG(hw, PAP); /* 62 */
-
- /* Physical */
- *reg++ = IXGB_READ_REG(hw, PCSC1); /* 63 */
- *reg++ = IXGB_READ_REG(hw, PCSC2); /* 64 */
- *reg++ = IXGB_READ_REG(hw, PCSS1); /* 65 */
- *reg++ = IXGB_READ_REG(hw, PCSS2); /* 66 */
- *reg++ = IXGB_READ_REG(hw, XPCSS); /* 67 */
- *reg++ = IXGB_READ_REG(hw, UCCR); /* 68 */
- *reg++ = IXGB_READ_REG(hw, XPCSTC); /* 69 */
- *reg++ = IXGB_READ_REG(hw, MACA); /* 70 */
- *reg++ = IXGB_READ_REG(hw, APAE); /* 71 */
- *reg++ = IXGB_READ_REG(hw, ARD); /* 72 */
- *reg++ = IXGB_READ_REG(hw, AIS); /* 73 */
- *reg++ = IXGB_READ_REG(hw, MSCA); /* 74 */
- *reg++ = IXGB_READ_REG(hw, MSRWD); /* 75 */
-
- /* Statistics */
- *reg++ = IXGB_GET_STAT(adapter, tprl); /* 76 */
- *reg++ = IXGB_GET_STAT(adapter, tprh); /* 77 */
- *reg++ = IXGB_GET_STAT(adapter, gprcl); /* 78 */
- *reg++ = IXGB_GET_STAT(adapter, gprch); /* 79 */
- *reg++ = IXGB_GET_STAT(adapter, bprcl); /* 80 */
- *reg++ = IXGB_GET_STAT(adapter, bprch); /* 81 */
- *reg++ = IXGB_GET_STAT(adapter, mprcl); /* 82 */
- *reg++ = IXGB_GET_STAT(adapter, mprch); /* 83 */
- *reg++ = IXGB_GET_STAT(adapter, uprcl); /* 84 */
- *reg++ = IXGB_GET_STAT(adapter, uprch); /* 85 */
- *reg++ = IXGB_GET_STAT(adapter, vprcl); /* 86 */
- *reg++ = IXGB_GET_STAT(adapter, vprch); /* 87 */
- *reg++ = IXGB_GET_STAT(adapter, jprcl); /* 88 */
- *reg++ = IXGB_GET_STAT(adapter, jprch); /* 89 */
- *reg++ = IXGB_GET_STAT(adapter, gorcl); /* 90 */
- *reg++ = IXGB_GET_STAT(adapter, gorch); /* 91 */
- *reg++ = IXGB_GET_STAT(adapter, torl); /* 92 */
- *reg++ = IXGB_GET_STAT(adapter, torh); /* 93 */
- *reg++ = IXGB_GET_STAT(adapter, rnbc); /* 94 */
- *reg++ = IXGB_GET_STAT(adapter, ruc); /* 95 */
- *reg++ = IXGB_GET_STAT(adapter, roc); /* 96 */
- *reg++ = IXGB_GET_STAT(adapter, rlec); /* 97 */
- *reg++ = IXGB_GET_STAT(adapter, crcerrs); /* 98 */
- *reg++ = IXGB_GET_STAT(adapter, icbc); /* 99 */
- *reg++ = IXGB_GET_STAT(adapter, ecbc); /* 100 */
- *reg++ = IXGB_GET_STAT(adapter, mpc); /* 101 */
- *reg++ = IXGB_GET_STAT(adapter, tptl); /* 102 */
- *reg++ = IXGB_GET_STAT(adapter, tpth); /* 103 */
- *reg++ = IXGB_GET_STAT(adapter, gptcl); /* 104 */
- *reg++ = IXGB_GET_STAT(adapter, gptch); /* 105 */
- *reg++ = IXGB_GET_STAT(adapter, bptcl); /* 106 */
- *reg++ = IXGB_GET_STAT(adapter, bptch); /* 107 */
- *reg++ = IXGB_GET_STAT(adapter, mptcl); /* 108 */
- *reg++ = IXGB_GET_STAT(adapter, mptch); /* 109 */
- *reg++ = IXGB_GET_STAT(adapter, uptcl); /* 110 */
- *reg++ = IXGB_GET_STAT(adapter, uptch); /* 111 */
- *reg++ = IXGB_GET_STAT(adapter, vptcl); /* 112 */
- *reg++ = IXGB_GET_STAT(adapter, vptch); /* 113 */
- *reg++ = IXGB_GET_STAT(adapter, jptcl); /* 114 */
- *reg++ = IXGB_GET_STAT(adapter, jptch); /* 115 */
- *reg++ = IXGB_GET_STAT(adapter, gotcl); /* 116 */
- *reg++ = IXGB_GET_STAT(adapter, gotch); /* 117 */
- *reg++ = IXGB_GET_STAT(adapter, totl); /* 118 */
- *reg++ = IXGB_GET_STAT(adapter, toth); /* 119 */
- *reg++ = IXGB_GET_STAT(adapter, dc); /* 120 */
- *reg++ = IXGB_GET_STAT(adapter, plt64c); /* 121 */
- *reg++ = IXGB_GET_STAT(adapter, tsctc); /* 122 */
- *reg++ = IXGB_GET_STAT(adapter, tsctfc); /* 123 */
- *reg++ = IXGB_GET_STAT(adapter, ibic); /* 124 */
- *reg++ = IXGB_GET_STAT(adapter, rfc); /* 125 */
- *reg++ = IXGB_GET_STAT(adapter, lfc); /* 126 */
- *reg++ = IXGB_GET_STAT(adapter, pfrc); /* 127 */
- *reg++ = IXGB_GET_STAT(adapter, pftc); /* 128 */
- *reg++ = IXGB_GET_STAT(adapter, mcfrc); /* 129 */
- *reg++ = IXGB_GET_STAT(adapter, mcftc); /* 130 */
- *reg++ = IXGB_GET_STAT(adapter, xonrxc); /* 131 */
- *reg++ = IXGB_GET_STAT(adapter, xontxc); /* 132 */
- *reg++ = IXGB_GET_STAT(adapter, xoffrxc); /* 133 */
- *reg++ = IXGB_GET_STAT(adapter, xofftxc); /* 134 */
- *reg++ = IXGB_GET_STAT(adapter, rjc); /* 135 */
-
- regs->len = (reg - reg_start) * sizeof(u32);
-}
-
-static int
-ixgb_get_eeprom_len(struct net_device *netdev)
-{
- /* return size in bytes */
- return IXGB_EEPROM_SIZE << 1;
-}
-
-static int
-ixgb_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- __le16 *eeprom_buff;
- int i, max_len, first_word, last_word;
- int ret_val = 0;
-
- if (eeprom->len == 0) {
- ret_val = -EINVAL;
- goto geeprom_error;
- }
-
- eeprom->magic = hw->vendor_id | (hw->device_id << 16);
-
- max_len = ixgb_get_eeprom_len(netdev);
-
- if (eeprom->offset > eeprom->offset + eeprom->len) {
- ret_val = -EINVAL;
- goto geeprom_error;
- }
-
- if ((eeprom->offset + eeprom->len) > max_len)
- eeprom->len = (max_len - eeprom->offset);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
-
- eeprom_buff = kmalloc(sizeof(__le16) *
- (last_word - first_word + 1), GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- /* note the eeprom was good because the driver loaded */
- for (i = 0; i <= (last_word - first_word); i++)
- eeprom_buff[i] = ixgb_get_eeprom_word(hw, (first_word + i));
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
- kfree(eeprom_buff);
-
-geeprom_error:
- return ret_val;
-}
-
-static int
-ixgb_set_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- void *ptr;
- int max_len, first_word, last_word;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16)))
- return -EFAULT;
-
- max_len = ixgb_get_eeprom_len(netdev);
-
- if (eeprom->offset > eeprom->offset + eeprom->len)
- return -EINVAL;
-
- if ((eeprom->offset + eeprom->len) > max_len)
- eeprom->len = (max_len - eeprom->offset);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_buff = kmalloc(max_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ptr = (void *)eeprom_buff;
-
- if (eeprom->offset & 1) {
- /* need read/modify/write of first changed EEPROM word */
- /* only the second byte of the word is being modified */
- eeprom_buff[0] = ixgb_read_eeprom(hw, first_word);
- ptr++;
- }
- if ((eeprom->offset + eeprom->len) & 1) {
- /* need read/modify/write of last changed EEPROM word */
- /* only the first byte of the word is being modified */
- eeprom_buff[last_word - first_word]
- = ixgb_read_eeprom(hw, last_word);
- }
-
- memcpy(ptr, bytes, eeprom->len);
- for (i = 0; i <= (last_word - first_word); i++)
- ixgb_write_eeprom(hw, first_word + i, eeprom_buff[i]);
-
- /* Update the checksum over the first part of the EEPROM if needed */
- if (first_word <= EEPROM_CHECKSUM_REG)
- ixgb_update_eeprom_checksum(hw);
-
- kfree(eeprom_buff);
- return 0;
-}
-
-static void
-ixgb_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- strncpy(drvinfo->driver, ixgb_driver_name, 32);
- strncpy(drvinfo->version, ixgb_driver_version, 32);
- strncpy(drvinfo->fw_version, "N/A", 32);
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
- drvinfo->n_stats = IXGB_STATS_LEN;
- drvinfo->regdump_len = ixgb_get_regs_len(netdev);
- drvinfo->eedump_len = ixgb_get_eeprom_len(netdev);
-}
-
-static void
-ixgb_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
-
- ring->rx_max_pending = MAX_RXD;
- ring->tx_max_pending = MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rxdr->count;
- ring->tx_pending = txdr->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int
-ixgb_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
- struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
- int err;
-
- tx_old = adapter->tx_ring;
- rx_old = adapter->rx_ring;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- if (netif_running(adapter->netdev))
- ixgb_down(adapter, true);
-
- rxdr->count = max(ring->rx_pending,(u32)MIN_RXD);
- rxdr->count = min(rxdr->count,(u32)MAX_RXD);
- rxdr->count = ALIGN(rxdr->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
-
- txdr->count = max(ring->tx_pending,(u32)MIN_TXD);
- txdr->count = min(txdr->count,(u32)MAX_TXD);
- txdr->count = ALIGN(txdr->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if (netif_running(adapter->netdev)) {
- /* Try to get new resources before deleting old */
- if ((err = ixgb_setup_rx_resources(adapter)))
- goto err_setup_rx;
- if ((err = ixgb_setup_tx_resources(adapter)))
- goto err_setup_tx;
-
- /* save the new, restore the old in order to free it,
- * then restore the new back again */
-
- rx_new = adapter->rx_ring;
- tx_new = adapter->tx_ring;
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- ixgb_free_rx_resources(adapter);
- ixgb_free_tx_resources(adapter);
- adapter->rx_ring = rx_new;
- adapter->tx_ring = tx_new;
- if ((err = ixgb_up(adapter)))
- return err;
- ixgb_set_speed_duplex(netdev);
- }
-
- return 0;
-err_setup_tx:
- ixgb_free_rx_resources(adapter);
-err_setup_rx:
- adapter->rx_ring = rx_old;
- adapter->tx_ring = tx_old;
- ixgb_up(adapter);
- return err;
-}
-
-static int
-ixgb_set_phys_id(struct net_device *netdev, enum ethtool_phys_id_state state)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- return 2;
-
- case ETHTOOL_ID_ON:
- ixgb_led_on(&adapter->hw);
- break;
-
- case ETHTOOL_ID_OFF:
- case ETHTOOL_ID_INACTIVE:
- ixgb_led_off(&adapter->hw);
- }
-
- return 0;
-}
-
-static int
-ixgb_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_STATS:
- return IXGB_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void
-ixgb_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int i;
- char *p = NULL;
-
- ixgb_update_stats(adapter);
- for (i = 0; i < IXGB_STATS_LEN; i++) {
- switch (ixgb_gstrings_stats[i].type) {
- case NETDEV_STATS:
- p = (char *) netdev +
- ixgb_gstrings_stats[i].stat_offset;
- break;
- case IXGB_STATS:
- p = (char *) adapter +
- ixgb_gstrings_stats[i].stat_offset;
- break;
- }
-
- data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
-}
-
-static void
-ixgb_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
-{
- int i;
-
- switch(stringset) {
- case ETH_SS_STATS:
- for (i = 0; i < IXGB_STATS_LEN; i++) {
- memcpy(data + i * ETH_GSTRING_LEN,
- ixgb_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- }
- break;
- }
-}
-
-static int ixgb_set_flags(struct net_device *netdev, u32 data)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- bool need_reset;
- int rc;
-
- /*
- * Tx VLAN insertion does not work per HW design when Rx stripping is
- * disabled. Disable txvlan when rxvlan is turned off, and enable
- * rxvlan when txvlan is turned on.
- */
- if (!(data & ETH_FLAG_RXVLAN) &&
- (netdev->features & NETIF_F_HW_VLAN_TX))
- data &= ~ETH_FLAG_TXVLAN;
- else if (data & ETH_FLAG_TXVLAN)
- data |= ETH_FLAG_RXVLAN;
-
- need_reset = (data & ETH_FLAG_RXVLAN) !=
- (netdev->features & NETIF_F_HW_VLAN_RX);
-
- rc = ethtool_op_set_flags(netdev, data, ETH_FLAG_RXVLAN |
- ETH_FLAG_TXVLAN);
- if (rc)
- return rc;
-
- if (need_reset) {
- if (netif_running(netdev)) {
- ixgb_down(adapter, true);
- ixgb_up(adapter);
- ixgb_set_speed_duplex(netdev);
- } else
- ixgb_reset(adapter);
- }
-
- return 0;
-}
-
-static const struct ethtool_ops ixgb_ethtool_ops = {
- .get_settings = ixgb_get_settings,
- .set_settings = ixgb_set_settings,
- .get_drvinfo = ixgb_get_drvinfo,
- .get_regs_len = ixgb_get_regs_len,
- .get_regs = ixgb_get_regs,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = ixgb_get_eeprom_len,
- .get_eeprom = ixgb_get_eeprom,
- .set_eeprom = ixgb_set_eeprom,
- .get_ringparam = ixgb_get_ringparam,
- .set_ringparam = ixgb_set_ringparam,
- .get_pauseparam = ixgb_get_pauseparam,
- .set_pauseparam = ixgb_set_pauseparam,
- .get_rx_csum = ixgb_get_rx_csum,
- .set_rx_csum = ixgb_set_rx_csum,
- .get_tx_csum = ixgb_get_tx_csum,
- .set_tx_csum = ixgb_set_tx_csum,
- .set_sg = ethtool_op_set_sg,
- .get_msglevel = ixgb_get_msglevel,
- .set_msglevel = ixgb_set_msglevel,
- .set_tso = ixgb_set_tso,
- .get_strings = ixgb_get_strings,
- .set_phys_id = ixgb_set_phys_id,
- .get_sset_count = ixgb_get_sset_count,
- .get_ethtool_stats = ixgb_get_ethtool_stats,
- .get_flags = ethtool_op_get_flags,
- .set_flags = ixgb_set_flags,
-};
-
-void ixgb_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &ixgb_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ixgb_hw.c
- * Shared functions for accessing and configuring the adapter
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "ixgb_hw.h"
-#include "ixgb_ids.h"
-
-#include <linux/etherdevice.h>
-
-/* Local function prototypes */
-
-static u32 ixgb_hash_mc_addr(struct ixgb_hw *hw, u8 * mc_addr);
-
-static void ixgb_mta_set(struct ixgb_hw *hw, u32 hash_value);
-
-static void ixgb_get_bus_info(struct ixgb_hw *hw);
-
-static bool ixgb_link_reset(struct ixgb_hw *hw);
-
-static void ixgb_optics_reset(struct ixgb_hw *hw);
-
-static void ixgb_optics_reset_bcm(struct ixgb_hw *hw);
-
-static ixgb_phy_type ixgb_identify_phy(struct ixgb_hw *hw);
-
-static void ixgb_clear_hw_cntrs(struct ixgb_hw *hw);
-
-static void ixgb_clear_vfta(struct ixgb_hw *hw);
-
-static void ixgb_init_rx_addrs(struct ixgb_hw *hw);
-
-static u16 ixgb_read_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type);
-
-static bool ixgb_setup_fc(struct ixgb_hw *hw);
-
-static bool mac_addr_valid(u8 *mac_addr);
-
-static u32 ixgb_mac_reset(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
-
- ctrl_reg = IXGB_CTRL0_RST |
- IXGB_CTRL0_SDP3_DIR | /* All pins are Output=1 */
- IXGB_CTRL0_SDP2_DIR |
- IXGB_CTRL0_SDP1_DIR |
- IXGB_CTRL0_SDP0_DIR |
- IXGB_CTRL0_SDP3 | /* Initial value 1101 */
- IXGB_CTRL0_SDP2 |
- IXGB_CTRL0_SDP0;
-
-#ifdef HP_ZX1
- /* Workaround for 82597EX reset errata */
- IXGB_WRITE_REG_IO(hw, CTRL0, ctrl_reg);
-#else
- IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
-#endif
-
- /* Delay a few ms just to allow the reset to complete */
- msleep(IXGB_DELAY_AFTER_RESET);
- ctrl_reg = IXGB_READ_REG(hw, CTRL0);
-#ifdef DBG
- /* Make sure the self-clearing global reset bit did self clear */
- ASSERT(!(ctrl_reg & IXGB_CTRL0_RST));
-#endif
-
- if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID) {
- ctrl_reg = /* Enable interrupt from XFP and SerDes */
- IXGB_CTRL1_GPI0_EN |
- IXGB_CTRL1_SDP6_DIR |
- IXGB_CTRL1_SDP7_DIR |
- IXGB_CTRL1_SDP6 |
- IXGB_CTRL1_SDP7;
- IXGB_WRITE_REG(hw, CTRL1, ctrl_reg);
- ixgb_optics_reset_bcm(hw);
- }
-
- if (hw->phy_type == ixgb_phy_type_txn17401)
- ixgb_optics_reset(hw);
-
- return ctrl_reg;
-}
-
-/******************************************************************************
- * Reset the transmit and receive units; mask and clear all interrupts.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-bool
-ixgb_adapter_stop(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
- u32 icr_reg;
-
- ENTER();
-
- /* If we are stopped or resetting exit gracefully and wait to be
- * started again before accessing the hardware.
- */
- if (hw->adapter_stopped) {
- pr_debug("Exiting because the adapter is already stopped!!!\n");
- return false;
- }
-
- /* Set the Adapter Stopped flag so other driver functions stop
- * touching the Hardware.
- */
- hw->adapter_stopped = true;
-
- /* Clear interrupt mask to stop board from generating interrupts */
- pr_debug("Masking off all interrupts\n");
- IXGB_WRITE_REG(hw, IMC, 0xFFFFFFFF);
-
- /* Disable the Transmit and Receive units. Then delay to allow
- * any pending transactions to complete before we hit the MAC with
- * the global reset.
- */
- IXGB_WRITE_REG(hw, RCTL, IXGB_READ_REG(hw, RCTL) & ~IXGB_RCTL_RXEN);
- IXGB_WRITE_REG(hw, TCTL, IXGB_READ_REG(hw, TCTL) & ~IXGB_TCTL_TXEN);
- IXGB_WRITE_FLUSH(hw);
- msleep(IXGB_DELAY_BEFORE_RESET);
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- pr_debug("Issuing a global reset to MAC\n");
-
- ctrl_reg = ixgb_mac_reset(hw);
-
- /* Clear interrupt mask to stop board from generating interrupts */
- pr_debug("Masking off all interrupts\n");
- IXGB_WRITE_REG(hw, IMC, 0xffffffff);
-
- /* Clear any pending interrupt events. */
- icr_reg = IXGB_READ_REG(hw, ICR);
-
- return ctrl_reg & IXGB_CTRL0_RST;
-}
-
-
-/******************************************************************************
- * Identifies the vendor of the optics module on the adapter. The SR adapters
- * support two different types of XPAK optics, so it is necessary to determine
- * which optics are present before applying any optics-specific workarounds.
- *
- * hw - Struct containing variables accessed by shared code.
- *
- * Returns: the vendor of the XPAK optics module.
- *****************************************************************************/
-static ixgb_xpak_vendor
-ixgb_identify_xpak_vendor(struct ixgb_hw *hw)
-{
- u32 i;
- u16 vendor_name[5];
- ixgb_xpak_vendor xpak_vendor;
-
- ENTER();
-
- /* Read the first few bytes of the vendor string from the XPAK NVR
- * registers. These are standard XENPAK/XPAK registers, so all XPAK
- * devices should implement them. */
- for (i = 0; i < 5; i++) {
- vendor_name[i] = ixgb_read_phy_reg(hw,
- MDIO_PMA_PMD_XPAK_VENDOR_NAME
- + i, IXGB_PHY_ADDRESS,
- MDIO_MMD_PMAPMD);
- }
-
- /* Determine the actual vendor */
- if (vendor_name[0] == 'I' &&
- vendor_name[1] == 'N' &&
- vendor_name[2] == 'T' &&
- vendor_name[3] == 'E' && vendor_name[4] == 'L') {
- xpak_vendor = ixgb_xpak_vendor_intel;
- } else {
- xpak_vendor = ixgb_xpak_vendor_infineon;
- }
-
- return xpak_vendor;
-}
-
-/******************************************************************************
- * Determine the physical layer module on the adapter.
- *
- * hw - Struct containing variables accessed by shared code. The device_id
- * field must be (correctly) populated before calling this routine.
- *
- * Returns: the phy type of the adapter.
- *****************************************************************************/
-static ixgb_phy_type
-ixgb_identify_phy(struct ixgb_hw *hw)
-{
- ixgb_phy_type phy_type;
- ixgb_xpak_vendor xpak_vendor;
-
- ENTER();
-
- /* Infer the transceiver/phy type from the device id */
- switch (hw->device_id) {
- case IXGB_DEVICE_ID_82597EX:
- pr_debug("Identified TXN17401 optics\n");
- phy_type = ixgb_phy_type_txn17401;
- break;
-
- case IXGB_DEVICE_ID_82597EX_SR:
- /* The SR adapters carry two different types of XPAK optics
- * modules; read the vendor identifier to determine the exact
- * type of optics. */
- xpak_vendor = ixgb_identify_xpak_vendor(hw);
- if (xpak_vendor == ixgb_xpak_vendor_intel) {
- pr_debug("Identified TXN17201 optics\n");
- phy_type = ixgb_phy_type_txn17201;
- } else {
- pr_debug("Identified G6005 optics\n");
- phy_type = ixgb_phy_type_g6005;
- }
- break;
- case IXGB_DEVICE_ID_82597EX_LR:
- pr_debug("Identified G6104 optics\n");
- phy_type = ixgb_phy_type_g6104;
- break;
- case IXGB_DEVICE_ID_82597EX_CX4:
- pr_debug("Identified CX4\n");
- xpak_vendor = ixgb_identify_xpak_vendor(hw);
- if (xpak_vendor == ixgb_xpak_vendor_intel) {
- pr_debug("Identified TXN17201 optics\n");
- phy_type = ixgb_phy_type_txn17201;
- } else {
- pr_debug("Identified G6005 optics\n");
- phy_type = ixgb_phy_type_g6005;
- }
- break;
- default:
- pr_debug("Unknown physical layer module\n");
- phy_type = ixgb_phy_type_unknown;
- break;
- }
-
- /* update phy type for sun specific board */
- if (hw->subsystem_vendor_id == SUN_SUBVENDOR_ID)
- phy_type = ixgb_phy_type_bcm;
-
- return phy_type;
-}
-
-/******************************************************************************
- * Performs basic configuration of the adapter.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Resets the controller.
- * Reads and validates the EEPROM.
- * Initializes the receive address registers.
- * Initializes the multicast table.
- * Clears all on-chip counters.
- * Calls routine to setup flow control settings.
- * Leaves the transmit and receive units disabled and uninitialized.
- *
- * Returns:
- * true if successful,
- * false if unrecoverable problems were encountered.
- *****************************************************************************/
-bool
-ixgb_init_hw(struct ixgb_hw *hw)
-{
- u32 i;
- u32 ctrl_reg;
- bool status;
-
- ENTER();
-
- /* Issue a global reset to the MAC. This will reset the chip's
- * transmit, receive, DMA, and link units. It will not effect
- * the current PCI configuration. The global reset bit is self-
- * clearing, and should clear within a microsecond.
- */
- pr_debug("Issuing a global reset to MAC\n");
-
- ctrl_reg = ixgb_mac_reset(hw);
-
- pr_debug("Issuing an EE reset to MAC\n");
-#ifdef HP_ZX1
- /* Workaround for 82597EX reset errata */
- IXGB_WRITE_REG_IO(hw, CTRL1, IXGB_CTRL1_EE_RST);
-#else
- IXGB_WRITE_REG(hw, CTRL1, IXGB_CTRL1_EE_RST);
-#endif
-
- /* Delay a few ms just to allow the reset to complete */
- msleep(IXGB_DELAY_AFTER_EE_RESET);
-
- if (!ixgb_get_eeprom_data(hw))
- return false;
-
- /* Use the device id to determine the type of phy/transceiver. */
- hw->device_id = ixgb_get_ee_device_id(hw);
- hw->phy_type = ixgb_identify_phy(hw);
-
- /* Setup the receive addresses.
- * Receive Address Registers (RARs 0 - 15).
- */
- ixgb_init_rx_addrs(hw);
-
- /*
- * Check that a valid MAC address has been set.
- * If it is not valid, we fail hardware init.
- */
- if (!mac_addr_valid(hw->curr_mac_addr)) {
- pr_debug("MAC address invalid after ixgb_init_rx_addrs\n");
- return(false);
- }
-
- /* tell the routines in this file they can access hardware again */
- hw->adapter_stopped = false;
-
- /* Fill in the bus_info structure */
- ixgb_get_bus_info(hw);
-
- /* Zero out the Multicast HASH table */
- pr_debug("Zeroing the MTA\n");
- for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
- IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
-
- /* Zero out the VLAN Filter Table Array */
- ixgb_clear_vfta(hw);
-
- /* Zero all of the hardware counters */
- ixgb_clear_hw_cntrs(hw);
-
- /* Call a subroutine to setup flow control. */
- status = ixgb_setup_fc(hw);
-
- /* 82597EX errata: Call check-for-link in case lane deskew is locked */
- ixgb_check_for_link(hw);
-
- return status;
-}
-
-/******************************************************************************
- * Initializes receive address filters.
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- *****************************************************************************/
-static void
-ixgb_init_rx_addrs(struct ixgb_hw *hw)
-{
- u32 i;
-
- ENTER();
-
- /*
- * If the current mac address is valid, assume it is a software override
- * to the permanent address.
- * Otherwise, use the permanent address from the eeprom.
- */
- if (!mac_addr_valid(hw->curr_mac_addr)) {
-
- /* Get the MAC address from the eeprom for later reference */
- ixgb_get_ee_mac_addr(hw, hw->curr_mac_addr);
-
- pr_debug("Keeping Permanent MAC Addr = %pM\n",
- hw->curr_mac_addr);
- } else {
-
- /* Setup the receive address. */
- pr_debug("Overriding MAC Address in RAR[0]\n");
- pr_debug("New MAC Addr = %pM\n", hw->curr_mac_addr);
-
- ixgb_rar_set(hw, hw->curr_mac_addr, 0);
- }
-
- /* Zero out the other 15 receive addresses. */
- pr_debug("Clearing RAR[1-15]\n");
- for (i = 1; i < IXGB_RAR_ENTRIES; i++) {
- /* Write high reg first to disable the AV bit first */
- IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- }
-}
-
-/******************************************************************************
- * Updates the MAC's list of multicast addresses.
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr_list - the list of new multicast addresses
- * mc_addr_count - number of addresses
- * pad - number of bytes between addresses in the list
- *
- * The given list replaces any existing list. Clears the last 15 receive
- * address registers and the multicast table. Uses receive address registers
- * for the first 15 multicast addresses, and hashes the rest into the
- * multicast table.
- *****************************************************************************/
-void
-ixgb_mc_addr_list_update(struct ixgb_hw *hw,
- u8 *mc_addr_list,
- u32 mc_addr_count,
- u32 pad)
-{
- u32 hash_value;
- u32 i;
- u32 rar_used_count = 1; /* RAR[0] is used for our MAC address */
- u8 *mca;
-
- ENTER();
-
- /* Set the new number of MC addresses that we are being requested to use. */
- hw->num_mc_addrs = mc_addr_count;
-
- /* Clear RAR[1-15] */
- pr_debug("Clearing RAR[1-15]\n");
- for (i = rar_used_count; i < IXGB_RAR_ENTRIES; i++) {
- IXGB_WRITE_REG_ARRAY(hw, RA, (i << 1), 0);
- IXGB_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0);
- }
-
- /* Clear the MTA */
- pr_debug("Clearing MTA\n");
- for (i = 0; i < IXGB_MC_TBL_SIZE; i++)
- IXGB_WRITE_REG_ARRAY(hw, MTA, i, 0);
-
- /* Add the new addresses */
- mca = mc_addr_list;
- for (i = 0; i < mc_addr_count; i++) {
- pr_debug("Adding the multicast addresses:\n");
- pr_debug("MC Addr #%d = %pM\n", i, mca);
-
- /* Place this multicast address in the RAR if there is room, *
- * else put it in the MTA
- */
- if (rar_used_count < IXGB_RAR_ENTRIES) {
- ixgb_rar_set(hw, mca, rar_used_count);
- pr_debug("Added a multicast address to RAR[%d]\n", i);
- rar_used_count++;
- } else {
- hash_value = ixgb_hash_mc_addr(hw, mca);
-
- pr_debug("Hash value = 0x%03X\n", hash_value);
-
- ixgb_mta_set(hw, hash_value);
- }
-
- mca += IXGB_ETH_LENGTH_OF_ADDRESS + pad;
- }
-
- pr_debug("MC Update Complete\n");
-}
-
-/******************************************************************************
- * Hashes an address to determine its location in the multicast table
- *
- * hw - Struct containing variables accessed by shared code
- * mc_addr - the multicast address to hash
- *
- * Returns:
- * The hash value
- *****************************************************************************/
-static u32
-ixgb_hash_mc_addr(struct ixgb_hw *hw,
- u8 *mc_addr)
-{
- u32 hash_value = 0;
-
- ENTER();
-
- /* The portion of the address that is used for the hash table is
- * determined by the mc_filter_type setting.
- */
- switch (hw->mc_filter_type) {
- /* [0] [1] [2] [3] [4] [5]
- * 01 AA 00 12 34 56
- * LSB MSB - According to H/W docs */
- case 0:
- /* [47:36] i.e. 0x563 for above example address */
- hash_value =
- ((mc_addr[4] >> 4) | (((u16) mc_addr[5]) << 4));
- break;
- case 1: /* [46:35] i.e. 0xAC6 for above example address */
- hash_value =
- ((mc_addr[4] >> 3) | (((u16) mc_addr[5]) << 5));
- break;
- case 2: /* [45:34] i.e. 0x5D8 for above example address */
- hash_value =
- ((mc_addr[4] >> 2) | (((u16) mc_addr[5]) << 6));
- break;
- case 3: /* [43:32] i.e. 0x634 for above example address */
- hash_value = ((mc_addr[4]) | (((u16) mc_addr[5]) << 8));
- break;
- default:
- /* Invalid mc_filter_type, what should we do? */
- pr_debug("MC filter type param set incorrectly\n");
- ASSERT(0);
- break;
- }
-
- hash_value &= 0xFFF;
- return hash_value;
-}
-
-/******************************************************************************
- * Sets the bit in the multicast table corresponding to the hash value.
- *
- * hw - Struct containing variables accessed by shared code
- * hash_value - Multicast address hash value
- *****************************************************************************/
-static void
-ixgb_mta_set(struct ixgb_hw *hw,
- u32 hash_value)
-{
- u32 hash_bit, hash_reg;
- u32 mta_reg;
-
- /* The MTA is a register array of 128 32-bit registers.
- * It is treated like an array of 4096 bits. We want to set
- * bit BitArray[hash_value]. So we figure out what register
- * the bit is in, read it, OR in the new bit, then write
- * back the new value. The register is determined by the
- * upper 7 bits of the hash value and the bit within that
- * register are determined by the lower 5 bits of the value.
- */
- hash_reg = (hash_value >> 5) & 0x7F;
- hash_bit = hash_value & 0x1F;
-
- mta_reg = IXGB_READ_REG_ARRAY(hw, MTA, hash_reg);
-
- mta_reg |= (1 << hash_bit);
-
- IXGB_WRITE_REG_ARRAY(hw, MTA, hash_reg, mta_reg);
-}
-
-/******************************************************************************
- * Puts an ethernet address into a receive address register.
- *
- * hw - Struct containing variables accessed by shared code
- * addr - Address to put into receive address register
- * index - Receive address register to write
- *****************************************************************************/
-void
-ixgb_rar_set(struct ixgb_hw *hw,
- u8 *addr,
- u32 index)
-{
- u32 rar_low, rar_high;
-
- ENTER();
-
- /* HW expects these in little endian so we reverse the byte order
- * from network order (big endian) to little endian
- */
- rar_low = ((u32) addr[0] |
- ((u32)addr[1] << 8) |
- ((u32)addr[2] << 16) |
- ((u32)addr[3] << 24));
-
- rar_high = ((u32) addr[4] |
- ((u32)addr[5] << 8) |
- IXGB_RAH_AV);
-
- IXGB_WRITE_REG_ARRAY(hw, RA, (index << 1), rar_low);
- IXGB_WRITE_REG_ARRAY(hw, RA, ((index << 1) + 1), rar_high);
-}
-
-/******************************************************************************
- * Writes a value to the specified offset in the VLAN filter table.
- *
- * hw - Struct containing variables accessed by shared code
- * offset - Offset in VLAN filer table to write
- * value - Value to write into VLAN filter table
- *****************************************************************************/
-void
-ixgb_write_vfta(struct ixgb_hw *hw,
- u32 offset,
- u32 value)
-{
- IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, value);
-}
-
-/******************************************************************************
- * Clears the VLAN filer table
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clear_vfta(struct ixgb_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < IXGB_VLAN_FILTER_TBL_SIZE; offset++)
- IXGB_WRITE_REG_ARRAY(hw, VFTA, offset, 0);
-}
-
-/******************************************************************************
- * Configures the flow control settings based on SW configuration.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-
-static bool
-ixgb_setup_fc(struct ixgb_hw *hw)
-{
- u32 ctrl_reg;
- u32 pap_reg = 0; /* by default, assume no pause time */
- bool status = true;
-
- ENTER();
-
- /* Get the current control reg 0 settings */
- ctrl_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* Clear the Receive Pause Enable and Transmit Pause Enable bits */
- ctrl_reg &= ~(IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
-
- /* The possible values of the "flow_control" parameter are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames
- * but we do not support receiving pause frames).
- * 3: Both Rx and TX flow control (symmetric) are enabled.
- * other: Invalid.
- */
- switch (hw->fc.type) {
- case ixgb_fc_none: /* 0 */
- /* Set CMDC bit to disable Rx Flow control */
- ctrl_reg |= (IXGB_CTRL0_CMDC);
- break;
- case ixgb_fc_rx_pause: /* 1 */
- /* RX Flow control is enabled, and TX Flow control is
- * disabled.
- */
- ctrl_reg |= (IXGB_CTRL0_RPE);
- break;
- case ixgb_fc_tx_pause: /* 2 */
- /* TX Flow control is enabled, and RX Flow control is
- * disabled, by a software over-ride.
- */
- ctrl_reg |= (IXGB_CTRL0_TPE);
- pap_reg = hw->fc.pause_time;
- break;
- case ixgb_fc_full: /* 3 */
- /* Flow control (both RX and TX) is enabled by a software
- * over-ride.
- */
- ctrl_reg |= (IXGB_CTRL0_RPE | IXGB_CTRL0_TPE);
- pap_reg = hw->fc.pause_time;
- break;
- default:
- /* We should never get here. The value should be 0-3. */
- pr_debug("Flow control param set incorrectly\n");
- ASSERT(0);
- break;
- }
-
- /* Write the new settings */
- IXGB_WRITE_REG(hw, CTRL0, ctrl_reg);
-
- if (pap_reg != 0)
- IXGB_WRITE_REG(hw, PAP, pap_reg);
-
- /* Set the flow control receive threshold registers. Normally,
- * these registers will be set to a default threshold that may be
- * adjusted later by the driver's runtime code. However, if the
- * ability to transmit pause frames in not enabled, then these
- * registers will be set to 0.
- */
- if (!(hw->fc.type & ixgb_fc_tx_pause)) {
- IXGB_WRITE_REG(hw, FCRTL, 0);
- IXGB_WRITE_REG(hw, FCRTH, 0);
- } else {
- /* We need to set up the Receive Threshold high and low water
- * marks as well as (optionally) enabling the transmission of XON
- * frames. */
- if (hw->fc.send_xon) {
- IXGB_WRITE_REG(hw, FCRTL,
- (hw->fc.low_water | IXGB_FCRTL_XONE));
- } else {
- IXGB_WRITE_REG(hw, FCRTL, hw->fc.low_water);
- }
- IXGB_WRITE_REG(hw, FCRTH, hw->fc.high_water);
- }
- return status;
-}
-
-/******************************************************************************
- * Reads a word from a device over the Management Data Interface (MDI) bus.
- * This interface is used to manage Physical layer devices.
- *
- * hw - Struct containing variables accessed by hw code
- * reg_address - Offset of device register being read.
- * phy_address - Address of device on MDI.
- *
- * Returns: Data word (16 bits) from MDI device.
- *
- * The 82597EX has support for several MDI access methods. This routine
- * uses the new protocol MDI Single Command and Address Operation.
- * This requires that first an address cycle command is sent, followed by a
- * read command.
- *****************************************************************************/
-static u16
-ixgb_read_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type)
-{
- u32 i;
- u32 data;
- u32 command = 0;
-
- ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
- ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
- ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
-
- /* Setup and write the address cycle command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the address cycle completed
- ** The COMMAND bit will clear when the operation is complete.
- ** This may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Address cycle complete, setup and write the read command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_READ | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the read command completed
- ** The COMMAND bit will clear when the operation is complete.
- ** The read may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Operation is complete, get the data from the MDIO Read/Write Data
- * register and return.
- */
- data = IXGB_READ_REG(hw, MSRWD);
- data >>= IXGB_MSRWD_READ_DATA_SHIFT;
- return((u16) data);
-}
-
-/******************************************************************************
- * Writes a word to a device over the Management Data Interface (MDI) bus.
- * This interface is used to manage Physical layer devices.
- *
- * hw - Struct containing variables accessed by hw code
- * reg_address - Offset of device register being read.
- * phy_address - Address of device on MDI.
- * device_type - Also known as the Device ID or DID.
- * data - 16-bit value to be written
- *
- * Returns: void.
- *
- * The 82597EX has support for several MDI access methods. This routine
- * uses the new protocol MDI Single Command and Address Operation.
- * This requires that first an address cycle command is sent, followed by a
- * write command.
- *****************************************************************************/
-static void
-ixgb_write_phy_reg(struct ixgb_hw *hw,
- u32 reg_address,
- u32 phy_address,
- u32 device_type,
- u16 data)
-{
- u32 i;
- u32 command = 0;
-
- ASSERT(reg_address <= IXGB_MAX_PHY_REG_ADDRESS);
- ASSERT(phy_address <= IXGB_MAX_PHY_ADDRESS);
- ASSERT(device_type <= IXGB_MAX_PHY_DEV_TYPE);
-
- /* Put the data in the MDIO Read/Write Data register */
- IXGB_WRITE_REG(hw, MSRWD, (u32)data);
-
- /* Setup and write the address cycle command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_ADDR_CYCLE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the address cycle completed
- ** The COMMAND bit will clear when the operation is complete.
- ** This may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Address cycle complete, setup and write the write command */
- command = ((reg_address << IXGB_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGB_MSCA_DEV_TYPE_SHIFT) |
- (phy_address << IXGB_MSCA_PHY_ADDR_SHIFT) |
- (IXGB_MSCA_WRITE | IXGB_MSCA_MDI_COMMAND));
-
- IXGB_WRITE_REG(hw, MSCA, command);
-
- /**************************************************************
- ** Check every 10 usec to see if the read command completed
- ** The COMMAND bit will clear when the operation is complete.
- ** The write may take as long as 64 usecs (we'll wait 100 usecs max)
- ** from the CPU Write to the Ready bit assertion.
- **************************************************************/
-
- for (i = 0; i < 10; i++)
- {
- udelay(10);
-
- command = IXGB_READ_REG(hw, MSCA);
-
- if ((command & IXGB_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- ASSERT((command & IXGB_MSCA_MDI_COMMAND) == 0);
-
- /* Operation is complete, return. */
-}
-
-/******************************************************************************
- * Checks to see if the link status of the hardware has changed.
- *
- * hw - Struct containing variables accessed by hw code
- *
- * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
-void
-ixgb_check_for_link(struct ixgb_hw *hw)
-{
- u32 status_reg;
- u32 xpcss_reg;
-
- ENTER();
-
- xpcss_reg = IXGB_READ_REG(hw, XPCSS);
- status_reg = IXGB_READ_REG(hw, STATUS);
-
- if ((xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
- (status_reg & IXGB_STATUS_LU)) {
- hw->link_up = true;
- } else if (!(xpcss_reg & IXGB_XPCSS_ALIGN_STATUS) &&
- (status_reg & IXGB_STATUS_LU)) {
- pr_debug("XPCSS Not Aligned while Status:LU is set\n");
- hw->link_up = ixgb_link_reset(hw);
- } else {
- /*
- * 82597EX errata. Since the lane deskew problem may prevent
- * link, reset the link before reporting link down.
- */
- hw->link_up = ixgb_link_reset(hw);
- }
- /* Anything else for 10 Gig?? */
-}
-
-/******************************************************************************
- * Check for a bad link condition that may have occurred.
- * The indication is that the RFC / LFC registers may be incrementing
- * continually. A full adapter reset is required to recover.
- *
- * hw - Struct containing variables accessed by hw code
- *
- * Called by any function that needs to check the link status of the adapter.
- *****************************************************************************/
-bool ixgb_check_for_bad_link(struct ixgb_hw *hw)
-{
- u32 newLFC, newRFC;
- bool bad_link_returncode = false;
-
- if (hw->phy_type == ixgb_phy_type_txn17401) {
- newLFC = IXGB_READ_REG(hw, LFC);
- newRFC = IXGB_READ_REG(hw, RFC);
- if ((hw->lastLFC + 250 < newLFC)
- || (hw->lastRFC + 250 < newRFC)) {
- pr_debug("BAD LINK! too many LFC/RFC since last check\n");
- bad_link_returncode = true;
- }
- hw->lastLFC = newLFC;
- hw->lastRFC = newRFC;
- }
-
- return bad_link_returncode;
-}
-
-/******************************************************************************
- * Clears all hardware statistics counters.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_clear_hw_cntrs(struct ixgb_hw *hw)
-{
- volatile u32 temp_reg;
-
- ENTER();
-
- /* if we are stopped or resetting exit gracefully */
- if (hw->adapter_stopped) {
- pr_debug("Exiting because the adapter is stopped!!!\n");
- return;
- }
-
- temp_reg = IXGB_READ_REG(hw, TPRL);
- temp_reg = IXGB_READ_REG(hw, TPRH);
- temp_reg = IXGB_READ_REG(hw, GPRCL);
- temp_reg = IXGB_READ_REG(hw, GPRCH);
- temp_reg = IXGB_READ_REG(hw, BPRCL);
- temp_reg = IXGB_READ_REG(hw, BPRCH);
- temp_reg = IXGB_READ_REG(hw, MPRCL);
- temp_reg = IXGB_READ_REG(hw, MPRCH);
- temp_reg = IXGB_READ_REG(hw, UPRCL);
- temp_reg = IXGB_READ_REG(hw, UPRCH);
- temp_reg = IXGB_READ_REG(hw, VPRCL);
- temp_reg = IXGB_READ_REG(hw, VPRCH);
- temp_reg = IXGB_READ_REG(hw, JPRCL);
- temp_reg = IXGB_READ_REG(hw, JPRCH);
- temp_reg = IXGB_READ_REG(hw, GORCL);
- temp_reg = IXGB_READ_REG(hw, GORCH);
- temp_reg = IXGB_READ_REG(hw, TORL);
- temp_reg = IXGB_READ_REG(hw, TORH);
- temp_reg = IXGB_READ_REG(hw, RNBC);
- temp_reg = IXGB_READ_REG(hw, RUC);
- temp_reg = IXGB_READ_REG(hw, ROC);
- temp_reg = IXGB_READ_REG(hw, RLEC);
- temp_reg = IXGB_READ_REG(hw, CRCERRS);
- temp_reg = IXGB_READ_REG(hw, ICBC);
- temp_reg = IXGB_READ_REG(hw, ECBC);
- temp_reg = IXGB_READ_REG(hw, MPC);
- temp_reg = IXGB_READ_REG(hw, TPTL);
- temp_reg = IXGB_READ_REG(hw, TPTH);
- temp_reg = IXGB_READ_REG(hw, GPTCL);
- temp_reg = IXGB_READ_REG(hw, GPTCH);
- temp_reg = IXGB_READ_REG(hw, BPTCL);
- temp_reg = IXGB_READ_REG(hw, BPTCH);
- temp_reg = IXGB_READ_REG(hw, MPTCL);
- temp_reg = IXGB_READ_REG(hw, MPTCH);
- temp_reg = IXGB_READ_REG(hw, UPTCL);
- temp_reg = IXGB_READ_REG(hw, UPTCH);
- temp_reg = IXGB_READ_REG(hw, VPTCL);
- temp_reg = IXGB_READ_REG(hw, VPTCH);
- temp_reg = IXGB_READ_REG(hw, JPTCL);
- temp_reg = IXGB_READ_REG(hw, JPTCH);
- temp_reg = IXGB_READ_REG(hw, GOTCL);
- temp_reg = IXGB_READ_REG(hw, GOTCH);
- temp_reg = IXGB_READ_REG(hw, TOTL);
- temp_reg = IXGB_READ_REG(hw, TOTH);
- temp_reg = IXGB_READ_REG(hw, DC);
- temp_reg = IXGB_READ_REG(hw, PLT64C);
- temp_reg = IXGB_READ_REG(hw, TSCTC);
- temp_reg = IXGB_READ_REG(hw, TSCTFC);
- temp_reg = IXGB_READ_REG(hw, IBIC);
- temp_reg = IXGB_READ_REG(hw, RFC);
- temp_reg = IXGB_READ_REG(hw, LFC);
- temp_reg = IXGB_READ_REG(hw, PFRC);
- temp_reg = IXGB_READ_REG(hw, PFTC);
- temp_reg = IXGB_READ_REG(hw, MCFRC);
- temp_reg = IXGB_READ_REG(hw, MCFTC);
- temp_reg = IXGB_READ_REG(hw, XONRXC);
- temp_reg = IXGB_READ_REG(hw, XONTXC);
- temp_reg = IXGB_READ_REG(hw, XOFFRXC);
- temp_reg = IXGB_READ_REG(hw, XOFFTXC);
- temp_reg = IXGB_READ_REG(hw, RJC);
-}
-
-/******************************************************************************
- * Turns on the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-void
-ixgb_led_on(struct ixgb_hw *hw)
-{
- u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* To turn on the LED, clear software-definable pin 0 (SDP0). */
- ctrl0_reg &= ~IXGB_CTRL0_SDP0;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
-}
-
-/******************************************************************************
- * Turns off the software controllable LED
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-void
-ixgb_led_off(struct ixgb_hw *hw)
-{
- u32 ctrl0_reg = IXGB_READ_REG(hw, CTRL0);
-
- /* To turn off the LED, set software-definable pin 0 (SDP0). */
- ctrl0_reg |= IXGB_CTRL0_SDP0;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0_reg);
-}
-
-/******************************************************************************
- * Gets the current PCI bus type, speed, and width of the hardware
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_get_bus_info(struct ixgb_hw *hw)
-{
- u32 status_reg;
-
- status_reg = IXGB_READ_REG(hw, STATUS);
-
- hw->bus.type = (status_reg & IXGB_STATUS_PCIX_MODE) ?
- ixgb_bus_type_pcix : ixgb_bus_type_pci;
-
- if (hw->bus.type == ixgb_bus_type_pci) {
- hw->bus.speed = (status_reg & IXGB_STATUS_PCI_SPD) ?
- ixgb_bus_speed_66 : ixgb_bus_speed_33;
- } else {
- switch (status_reg & IXGB_STATUS_PCIX_SPD_MASK) {
- case IXGB_STATUS_PCIX_SPD_66:
- hw->bus.speed = ixgb_bus_speed_66;
- break;
- case IXGB_STATUS_PCIX_SPD_100:
- hw->bus.speed = ixgb_bus_speed_100;
- break;
- case IXGB_STATUS_PCIX_SPD_133:
- hw->bus.speed = ixgb_bus_speed_133;
- break;
- default:
- hw->bus.speed = ixgb_bus_speed_reserved;
- break;
- }
- }
-
- hw->bus.width = (status_reg & IXGB_STATUS_BUS64) ?
- ixgb_bus_width_64 : ixgb_bus_width_32;
-}
-
-/******************************************************************************
- * Tests a MAC address to ensure it is a valid Individual Address
- *
- * mac_addr - pointer to MAC address.
- *
- *****************************************************************************/
-static bool
-mac_addr_valid(u8 *mac_addr)
-{
- bool is_valid = true;
- ENTER();
-
- /* Make sure it is not a multicast address */
- if (is_multicast_ether_addr(mac_addr)) {
- pr_debug("MAC address is multicast\n");
- is_valid = false;
- }
- /* Not a broadcast address */
- else if (is_broadcast_ether_addr(mac_addr)) {
- pr_debug("MAC address is broadcast\n");
- is_valid = false;
- }
- /* Reject the zero address */
- else if (is_zero_ether_addr(mac_addr)) {
- pr_debug("MAC address is all zeros\n");
- is_valid = false;
- }
- return is_valid;
-}
-
-/******************************************************************************
- * Resets the 10GbE link. Waits the settle time and returns the state of
- * the link.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static bool
-ixgb_link_reset(struct ixgb_hw *hw)
-{
- bool link_status = false;
- u8 wait_retries = MAX_RESET_ITERATIONS;
- u8 lrst_retries = MAX_RESET_ITERATIONS;
-
- do {
- /* Reset the link */
- IXGB_WRITE_REG(hw, CTRL0,
- IXGB_READ_REG(hw, CTRL0) | IXGB_CTRL0_LRST);
-
- /* Wait for link-up and lane re-alignment */
- do {
- udelay(IXGB_DELAY_USECS_AFTER_LINK_RESET);
- link_status =
- ((IXGB_READ_REG(hw, STATUS) & IXGB_STATUS_LU)
- && (IXGB_READ_REG(hw, XPCSS) &
- IXGB_XPCSS_ALIGN_STATUS)) ? true : false;
- } while (!link_status && --wait_retries);
-
- } while (!link_status && --lrst_retries);
-
- return link_status;
-}
-
-/******************************************************************************
- * Resets the 10GbE optics module.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-static void
-ixgb_optics_reset(struct ixgb_hw *hw)
-{
- if (hw->phy_type == ixgb_phy_type_txn17401) {
- u16 mdio_reg;
-
- ixgb_write_phy_reg(hw,
- MDIO_CTRL1,
- IXGB_PHY_ADDRESS,
- MDIO_MMD_PMAPMD,
- MDIO_CTRL1_RESET);
-
- mdio_reg = ixgb_read_phy_reg(hw,
- MDIO_CTRL1,
- IXGB_PHY_ADDRESS,
- MDIO_MMD_PMAPMD);
- }
-}
-
-/******************************************************************************
- * Resets the 10GbE optics module for Sun variant NIC.
- *
- * hw - Struct containing variables accessed by shared code
- *****************************************************************************/
-
-#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG 0xC803
-#define IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL 0x0164
-#define IXGB_BCM8704_USER_CTRL_REG 0xC800
-#define IXGB_BCM8704_USER_CTRL_REG_VAL 0x7FBF
-#define IXGB_BCM8704_USER_DEV3_ADDR 0x0003
-#define IXGB_SUN_PHY_ADDRESS 0x0000
-#define IXGB_SUN_PHY_RESET_DELAY 305
-
-static void
-ixgb_optics_reset_bcm(struct ixgb_hw *hw)
-{
- u32 ctrl = IXGB_READ_REG(hw, CTRL0);
- ctrl &= ~IXGB_CTRL0_SDP2;
- ctrl |= IXGB_CTRL0_SDP3;
- IXGB_WRITE_REG(hw, CTRL0, ctrl);
- IXGB_WRITE_FLUSH(hw);
-
- /* SerDes needs extra delay */
- msleep(IXGB_SUN_PHY_RESET_DELAY);
-
- /* Broadcom 7408L configuration */
- /* Reference clock config */
- ixgb_write_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG_VAL);
- /* we must read the registers twice */
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_PMD_TX_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
-
- ixgb_write_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR,
- IXGB_BCM8704_USER_CTRL_REG_VAL);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
- ixgb_read_phy_reg(hw,
- IXGB_BCM8704_USER_CTRL_REG,
- IXGB_SUN_PHY_ADDRESS,
- IXGB_BCM8704_USER_DEV3_ADDR);
-
- /* SerDes needs extra delay */
- msleep(IXGB_SUN_PHY_RESET_DELAY);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGB_HW_H_
-#define _IXGB_HW_H_
-
-#include <linux/mdio.h>
-
-#include "ixgb_osdep.h"
-
-/* Enums */
-typedef enum {
- ixgb_mac_unknown = 0,
- ixgb_82597,
- ixgb_num_macs
-} ixgb_mac_type;
-
-/* Types of physical layer modules */
-typedef enum {
- ixgb_phy_type_unknown = 0,
- ixgb_phy_type_g6005, /* 850nm, MM fiber, XPAK transceiver */
- ixgb_phy_type_g6104, /* 1310nm, SM fiber, XPAK transceiver */
- ixgb_phy_type_txn17201, /* 850nm, MM fiber, XPAK transceiver */
- ixgb_phy_type_txn17401, /* 1310nm, SM fiber, XENPAK transceiver */
- ixgb_phy_type_bcm /* SUN specific board */
-} ixgb_phy_type;
-
-/* XPAK transceiver vendors, for the SR adapters */
-typedef enum {
- ixgb_xpak_vendor_intel,
- ixgb_xpak_vendor_infineon
-} ixgb_xpak_vendor;
-
-/* Media Types */
-typedef enum {
- ixgb_media_type_unknown = 0,
- ixgb_media_type_fiber = 1,
- ixgb_media_type_copper = 2,
- ixgb_num_media_types
-} ixgb_media_type;
-
-/* Flow Control Settings */
-typedef enum {
- ixgb_fc_none = 0,
- ixgb_fc_rx_pause = 1,
- ixgb_fc_tx_pause = 2,
- ixgb_fc_full = 3,
- ixgb_fc_default = 0xFF
-} ixgb_fc_type;
-
-/* PCI bus types */
-typedef enum {
- ixgb_bus_type_unknown = 0,
- ixgb_bus_type_pci,
- ixgb_bus_type_pcix
-} ixgb_bus_type;
-
-/* PCI bus speeds */
-typedef enum {
- ixgb_bus_speed_unknown = 0,
- ixgb_bus_speed_33,
- ixgb_bus_speed_66,
- ixgb_bus_speed_100,
- ixgb_bus_speed_133,
- ixgb_bus_speed_reserved
-} ixgb_bus_speed;
-
-/* PCI bus widths */
-typedef enum {
- ixgb_bus_width_unknown = 0,
- ixgb_bus_width_32,
- ixgb_bus_width_64
-} ixgb_bus_width;
-
-#define IXGB_ETH_LENGTH_OF_ADDRESS 6
-
-#define IXGB_EEPROM_SIZE 64 /* Size in words */
-
-#define SPEED_10000 10000
-#define FULL_DUPLEX 2
-
-#define MIN_NUMBER_OF_DESCRIPTORS 8
-#define MAX_NUMBER_OF_DESCRIPTORS 0xFFF8 /* 13 bits in RDLEN/TDLEN, 128B aligned */
-
-#define IXGB_DELAY_BEFORE_RESET 10 /* allow 10ms after idling rx/tx units */
-#define IXGB_DELAY_AFTER_RESET 1 /* allow 1ms after the reset */
-#define IXGB_DELAY_AFTER_EE_RESET 10 /* allow 10ms after the EEPROM reset */
-
-#define IXGB_DELAY_USECS_AFTER_LINK_RESET 13 /* allow 13 microseconds after the reset */
- /* NOTE: this is MICROSECONDS */
-#define MAX_RESET_ITERATIONS 8 /* number of iterations to get things right */
-
-/* General Registers */
-#define IXGB_CTRL0 0x00000 /* Device Control Register 0 - RW */
-#define IXGB_CTRL1 0x00008 /* Device Control Register 1 - RW */
-#define IXGB_STATUS 0x00010 /* Device Status Register - RO */
-#define IXGB_EECD 0x00018 /* EEPROM/Flash Control/Data Register - RW */
-#define IXGB_MFS 0x00020 /* Maximum Frame Size - RW */
-
-/* Interrupt */
-#define IXGB_ICR 0x00080 /* Interrupt Cause Read - R/clr */
-#define IXGB_ICS 0x00088 /* Interrupt Cause Set - RW */
-#define IXGB_IMS 0x00090 /* Interrupt Mask Set/Read - RW */
-#define IXGB_IMC 0x00098 /* Interrupt Mask Clear - WO */
-
-/* Receive */
-#define IXGB_RCTL 0x00100 /* RX Control - RW */
-#define IXGB_FCRTL 0x00108 /* Flow Control Receive Threshold Low - RW */
-#define IXGB_FCRTH 0x00110 /* Flow Control Receive Threshold High - RW */
-#define IXGB_RDBAL 0x00118 /* RX Descriptor Base Low - RW */
-#define IXGB_RDBAH 0x0011C /* RX Descriptor Base High - RW */
-#define IXGB_RDLEN 0x00120 /* RX Descriptor Length - RW */
-#define IXGB_RDH 0x00128 /* RX Descriptor Head - RW */
-#define IXGB_RDT 0x00130 /* RX Descriptor Tail - RW */
-#define IXGB_RDTR 0x00138 /* RX Delay Timer Ring - RW */
-#define IXGB_RXDCTL 0x00140 /* Receive Descriptor Control - RW */
-#define IXGB_RAIDC 0x00148 /* Receive Adaptive Interrupt Delay Control - RW */
-#define IXGB_RXCSUM 0x00158 /* Receive Checksum Control - RW */
-#define IXGB_RA 0x00180 /* Receive Address Array Base - RW */
-#define IXGB_RAL 0x00180 /* Receive Address Low [0:15] - RW */
-#define IXGB_RAH 0x00184 /* Receive Address High [0:15] - RW */
-#define IXGB_MTA 0x00200 /* Multicast Table Array [0:127] - RW */
-#define IXGB_VFTA 0x00400 /* VLAN Filter Table Array [0:127] - RW */
-#define IXGB_REQ_RX_DESCRIPTOR_MULTIPLE 8
-
-/* Transmit */
-#define IXGB_TCTL 0x00600 /* TX Control - RW */
-#define IXGB_TDBAL 0x00608 /* TX Descriptor Base Low - RW */
-#define IXGB_TDBAH 0x0060C /* TX Descriptor Base High - RW */
-#define IXGB_TDLEN 0x00610 /* TX Descriptor Length - RW */
-#define IXGB_TDH 0x00618 /* TX Descriptor Head - RW */
-#define IXGB_TDT 0x00620 /* TX Descriptor Tail - RW */
-#define IXGB_TIDV 0x00628 /* TX Interrupt Delay Value - RW */
-#define IXGB_TXDCTL 0x00630 /* Transmit Descriptor Control - RW */
-#define IXGB_TSPMT 0x00638 /* TCP Segmentation PAD & Min Threshold - RW */
-#define IXGB_PAP 0x00640 /* Pause and Pace - RW */
-#define IXGB_REQ_TX_DESCRIPTOR_MULTIPLE 8
-
-/* Physical */
-#define IXGB_PCSC1 0x00700 /* PCS Control 1 - RW */
-#define IXGB_PCSC2 0x00708 /* PCS Control 2 - RW */
-#define IXGB_PCSS1 0x00710 /* PCS Status 1 - RO */
-#define IXGB_PCSS2 0x00718 /* PCS Status 2 - RO */
-#define IXGB_XPCSS 0x00720 /* 10GBASE-X PCS Status (or XGXS Lane Status) - RO */
-#define IXGB_UCCR 0x00728 /* Unilink Circuit Control Register */
-#define IXGB_XPCSTC 0x00730 /* 10GBASE-X PCS Test Control */
-#define IXGB_MACA 0x00738 /* MDI Autoscan Command and Address - RW */
-#define IXGB_APAE 0x00740 /* Autoscan PHY Address Enable - RW */
-#define IXGB_ARD 0x00748 /* Autoscan Read Data - RO */
-#define IXGB_AIS 0x00750 /* Autoscan Interrupt Status - RO */
-#define IXGB_MSCA 0x00758 /* MDI Single Command and Address - RW */
-#define IXGB_MSRWD 0x00760 /* MDI Single Read and Write Data - RW, RO */
-
-/* Wake-up */
-#define IXGB_WUFC 0x00808 /* Wake Up Filter Control - RW */
-#define IXGB_WUS 0x00810 /* Wake Up Status - RO */
-#define IXGB_FFLT 0x01000 /* Flexible Filter Length Table - RW */
-#define IXGB_FFMT 0x01020 /* Flexible Filter Mask Table - RW */
-#define IXGB_FTVT 0x01420 /* Flexible Filter Value Table - RW */
-
-/* Statistics */
-#define IXGB_TPRL 0x02000 /* Total Packets Received (Low) */
-#define IXGB_TPRH 0x02004 /* Total Packets Received (High) */
-#define IXGB_GPRCL 0x02008 /* Good Packets Received Count (Low) */
-#define IXGB_GPRCH 0x0200C /* Good Packets Received Count (High) */
-#define IXGB_BPRCL 0x02010 /* Broadcast Packets Received Count (Low) */
-#define IXGB_BPRCH 0x02014 /* Broadcast Packets Received Count (High) */
-#define IXGB_MPRCL 0x02018 /* Multicast Packets Received Count (Low) */
-#define IXGB_MPRCH 0x0201C /* Multicast Packets Received Count (High) */
-#define IXGB_UPRCL 0x02020 /* Unicast Packets Received Count (Low) */
-#define IXGB_UPRCH 0x02024 /* Unicast Packets Received Count (High) */
-#define IXGB_VPRCL 0x02028 /* VLAN Packets Received Count (Low) */
-#define IXGB_VPRCH 0x0202C /* VLAN Packets Received Count (High) */
-#define IXGB_JPRCL 0x02030 /* Jumbo Packets Received Count (Low) */
-#define IXGB_JPRCH 0x02034 /* Jumbo Packets Received Count (High) */
-#define IXGB_GORCL 0x02038 /* Good Octets Received Count (Low) */
-#define IXGB_GORCH 0x0203C /* Good Octets Received Count (High) */
-#define IXGB_TORL 0x02040 /* Total Octets Received (Low) */
-#define IXGB_TORH 0x02044 /* Total Octets Received (High) */
-#define IXGB_RNBC 0x02048 /* Receive No Buffers Count */
-#define IXGB_RUC 0x02050 /* Receive Undersize Count */
-#define IXGB_ROC 0x02058 /* Receive Oversize Count */
-#define IXGB_RLEC 0x02060 /* Receive Length Error Count */
-#define IXGB_CRCERRS 0x02068 /* CRC Error Count */
-#define IXGB_ICBC 0x02070 /* Illegal control byte in mid-packet Count */
-#define IXGB_ECBC 0x02078 /* Error Control byte in mid-packet Count */
-#define IXGB_MPC 0x02080 /* Missed Packets Count */
-#define IXGB_TPTL 0x02100 /* Total Packets Transmitted (Low) */
-#define IXGB_TPTH 0x02104 /* Total Packets Transmitted (High) */
-#define IXGB_GPTCL 0x02108 /* Good Packets Transmitted Count (Low) */
-#define IXGB_GPTCH 0x0210C /* Good Packets Transmitted Count (High) */
-#define IXGB_BPTCL 0x02110 /* Broadcast Packets Transmitted Count (Low) */
-#define IXGB_BPTCH 0x02114 /* Broadcast Packets Transmitted Count (High) */
-#define IXGB_MPTCL 0x02118 /* Multicast Packets Transmitted Count (Low) */
-#define IXGB_MPTCH 0x0211C /* Multicast Packets Transmitted Count (High) */
-#define IXGB_UPTCL 0x02120 /* Unicast Packets Transmitted Count (Low) */
-#define IXGB_UPTCH 0x02124 /* Unicast Packets Transmitted Count (High) */
-#define IXGB_VPTCL 0x02128 /* VLAN Packets Transmitted Count (Low) */
-#define IXGB_VPTCH 0x0212C /* VLAN Packets Transmitted Count (High) */
-#define IXGB_JPTCL 0x02130 /* Jumbo Packets Transmitted Count (Low) */
-#define IXGB_JPTCH 0x02134 /* Jumbo Packets Transmitted Count (High) */
-#define IXGB_GOTCL 0x02138 /* Good Octets Transmitted Count (Low) */
-#define IXGB_GOTCH 0x0213C /* Good Octets Transmitted Count (High) */
-#define IXGB_TOTL 0x02140 /* Total Octets Transmitted Count (Low) */
-#define IXGB_TOTH 0x02144 /* Total Octets Transmitted Count (High) */
-#define IXGB_DC 0x02148 /* Defer Count */
-#define IXGB_PLT64C 0x02150 /* Packet Transmitted was less than 64 bytes Count */
-#define IXGB_TSCTC 0x02170 /* TCP Segmentation Context Transmitted Count */
-#define IXGB_TSCTFC 0x02178 /* TCP Segmentation Context Tx Fail Count */
-#define IXGB_IBIC 0x02180 /* Illegal byte during Idle stream count */
-#define IXGB_RFC 0x02188 /* Remote Fault Count */
-#define IXGB_LFC 0x02190 /* Local Fault Count */
-#define IXGB_PFRC 0x02198 /* Pause Frame Receive Count */
-#define IXGB_PFTC 0x021A0 /* Pause Frame Transmit Count */
-#define IXGB_MCFRC 0x021A8 /* MAC Control Frames (non-Pause) Received Count */
-#define IXGB_MCFTC 0x021B0 /* MAC Control Frames (non-Pause) Transmitted Count */
-#define IXGB_XONRXC 0x021B8 /* XON Received Count */
-#define IXGB_XONTXC 0x021C0 /* XON Transmitted Count */
-#define IXGB_XOFFRXC 0x021C8 /* XOFF Received Count */
-#define IXGB_XOFFTXC 0x021D0 /* XOFF Transmitted Count */
-#define IXGB_RJC 0x021D8 /* Receive Jabber Count */
-
-/* CTRL0 Bit Masks */
-#define IXGB_CTRL0_LRST 0x00000008
-#define IXGB_CTRL0_JFE 0x00000010
-#define IXGB_CTRL0_XLE 0x00000020
-#define IXGB_CTRL0_MDCS 0x00000040
-#define IXGB_CTRL0_CMDC 0x00000080
-#define IXGB_CTRL0_SDP0 0x00040000
-#define IXGB_CTRL0_SDP1 0x00080000
-#define IXGB_CTRL0_SDP2 0x00100000
-#define IXGB_CTRL0_SDP3 0x00200000
-#define IXGB_CTRL0_SDP0_DIR 0x00400000
-#define IXGB_CTRL0_SDP1_DIR 0x00800000
-#define IXGB_CTRL0_SDP2_DIR 0x01000000
-#define IXGB_CTRL0_SDP3_DIR 0x02000000
-#define IXGB_CTRL0_RST 0x04000000
-#define IXGB_CTRL0_RPE 0x08000000
-#define IXGB_CTRL0_TPE 0x10000000
-#define IXGB_CTRL0_VME 0x40000000
-
-/* CTRL1 Bit Masks */
-#define IXGB_CTRL1_GPI0_EN 0x00000001
-#define IXGB_CTRL1_GPI1_EN 0x00000002
-#define IXGB_CTRL1_GPI2_EN 0x00000004
-#define IXGB_CTRL1_GPI3_EN 0x00000008
-#define IXGB_CTRL1_SDP4 0x00000010
-#define IXGB_CTRL1_SDP5 0x00000020
-#define IXGB_CTRL1_SDP6 0x00000040
-#define IXGB_CTRL1_SDP7 0x00000080
-#define IXGB_CTRL1_SDP4_DIR 0x00000100
-#define IXGB_CTRL1_SDP5_DIR 0x00000200
-#define IXGB_CTRL1_SDP6_DIR 0x00000400
-#define IXGB_CTRL1_SDP7_DIR 0x00000800
-#define IXGB_CTRL1_EE_RST 0x00002000
-#define IXGB_CTRL1_RO_DIS 0x00020000
-#define IXGB_CTRL1_PCIXHM_MASK 0x00C00000
-#define IXGB_CTRL1_PCIXHM_1_2 0x00000000
-#define IXGB_CTRL1_PCIXHM_5_8 0x00400000
-#define IXGB_CTRL1_PCIXHM_3_4 0x00800000
-#define IXGB_CTRL1_PCIXHM_7_8 0x00C00000
-
-/* STATUS Bit Masks */
-#define IXGB_STATUS_LU 0x00000002
-#define IXGB_STATUS_AIP 0x00000004
-#define IXGB_STATUS_TXOFF 0x00000010
-#define IXGB_STATUS_XAUIME 0x00000020
-#define IXGB_STATUS_RES 0x00000040
-#define IXGB_STATUS_RIS 0x00000080
-#define IXGB_STATUS_RIE 0x00000100
-#define IXGB_STATUS_RLF 0x00000200
-#define IXGB_STATUS_RRF 0x00000400
-#define IXGB_STATUS_PCI_SPD 0x00000800
-#define IXGB_STATUS_BUS64 0x00001000
-#define IXGB_STATUS_PCIX_MODE 0x00002000
-#define IXGB_STATUS_PCIX_SPD_MASK 0x0000C000
-#define IXGB_STATUS_PCIX_SPD_66 0x00000000
-#define IXGB_STATUS_PCIX_SPD_100 0x00004000
-#define IXGB_STATUS_PCIX_SPD_133 0x00008000
-#define IXGB_STATUS_REV_ID_MASK 0x000F0000
-#define IXGB_STATUS_REV_ID_SHIFT 16
-
-/* EECD Bit Masks */
-#define IXGB_EECD_SK 0x00000001
-#define IXGB_EECD_CS 0x00000002
-#define IXGB_EECD_DI 0x00000004
-#define IXGB_EECD_DO 0x00000008
-#define IXGB_EECD_FWE_MASK 0x00000030
-#define IXGB_EECD_FWE_DIS 0x00000010
-#define IXGB_EECD_FWE_EN 0x00000020
-
-/* MFS */
-#define IXGB_MFS_SHIFT 16
-
-/* Interrupt Register Bit Masks (used for ICR, ICS, IMS, and IMC) */
-#define IXGB_INT_TXDW 0x00000001
-#define IXGB_INT_TXQE 0x00000002
-#define IXGB_INT_LSC 0x00000004
-#define IXGB_INT_RXSEQ 0x00000008
-#define IXGB_INT_RXDMT0 0x00000010
-#define IXGB_INT_RXO 0x00000040
-#define IXGB_INT_RXT0 0x00000080
-#define IXGB_INT_AUTOSCAN 0x00000200
-#define IXGB_INT_GPI0 0x00000800
-#define IXGB_INT_GPI1 0x00001000
-#define IXGB_INT_GPI2 0x00002000
-#define IXGB_INT_GPI3 0x00004000
-
-/* RCTL Bit Masks */
-#define IXGB_RCTL_RXEN 0x00000002
-#define IXGB_RCTL_SBP 0x00000004
-#define IXGB_RCTL_UPE 0x00000008
-#define IXGB_RCTL_MPE 0x00000010
-#define IXGB_RCTL_RDMTS_MASK 0x00000300
-#define IXGB_RCTL_RDMTS_1_2 0x00000000
-#define IXGB_RCTL_RDMTS_1_4 0x00000100
-#define IXGB_RCTL_RDMTS_1_8 0x00000200
-#define IXGB_RCTL_MO_MASK 0x00003000
-#define IXGB_RCTL_MO_47_36 0x00000000
-#define IXGB_RCTL_MO_46_35 0x00001000
-#define IXGB_RCTL_MO_45_34 0x00002000
-#define IXGB_RCTL_MO_43_32 0x00003000
-#define IXGB_RCTL_MO_SHIFT 12
-#define IXGB_RCTL_BAM 0x00008000
-#define IXGB_RCTL_BSIZE_MASK 0x00030000
-#define IXGB_RCTL_BSIZE_2048 0x00000000
-#define IXGB_RCTL_BSIZE_4096 0x00010000
-#define IXGB_RCTL_BSIZE_8192 0x00020000
-#define IXGB_RCTL_BSIZE_16384 0x00030000
-#define IXGB_RCTL_VFE 0x00040000
-#define IXGB_RCTL_CFIEN 0x00080000
-#define IXGB_RCTL_CFI 0x00100000
-#define IXGB_RCTL_RPDA_MASK 0x00600000
-#define IXGB_RCTL_RPDA_MC_MAC 0x00000000
-#define IXGB_RCTL_MC_ONLY 0x00400000
-#define IXGB_RCTL_CFF 0x00800000
-#define IXGB_RCTL_SECRC 0x04000000
-#define IXGB_RDT_FPDB 0x80000000
-
-#define IXGB_RCTL_IDLE_RX_UNIT 0
-
-/* FCRTL Bit Masks */
-#define IXGB_FCRTL_XONE 0x80000000
-
-/* RXDCTL Bit Masks */
-#define IXGB_RXDCTL_PTHRESH_MASK 0x000001FF
-#define IXGB_RXDCTL_PTHRESH_SHIFT 0
-#define IXGB_RXDCTL_HTHRESH_MASK 0x0003FE00
-#define IXGB_RXDCTL_HTHRESH_SHIFT 9
-#define IXGB_RXDCTL_WTHRESH_MASK 0x07FC0000
-#define IXGB_RXDCTL_WTHRESH_SHIFT 18
-
-/* RAIDC Bit Masks */
-#define IXGB_RAIDC_HIGHTHRS_MASK 0x0000003F
-#define IXGB_RAIDC_DELAY_MASK 0x000FF800
-#define IXGB_RAIDC_DELAY_SHIFT 11
-#define IXGB_RAIDC_POLL_MASK 0x1FF00000
-#define IXGB_RAIDC_POLL_SHIFT 20
-#define IXGB_RAIDC_RXT_GATE 0x40000000
-#define IXGB_RAIDC_EN 0x80000000
-
-#define IXGB_RAIDC_POLL_1000_INTERRUPTS_PER_SECOND 1220
-#define IXGB_RAIDC_POLL_5000_INTERRUPTS_PER_SECOND 244
-#define IXGB_RAIDC_POLL_10000_INTERRUPTS_PER_SECOND 122
-#define IXGB_RAIDC_POLL_20000_INTERRUPTS_PER_SECOND 61
-
-/* RXCSUM Bit Masks */
-#define IXGB_RXCSUM_IPOFL 0x00000100
-#define IXGB_RXCSUM_TUOFL 0x00000200
-
-/* RAH Bit Masks */
-#define IXGB_RAH_ASEL_MASK 0x00030000
-#define IXGB_RAH_ASEL_DEST 0x00000000
-#define IXGB_RAH_ASEL_SRC 0x00010000
-#define IXGB_RAH_AV 0x80000000
-
-/* TCTL Bit Masks */
-#define IXGB_TCTL_TCE 0x00000001
-#define IXGB_TCTL_TXEN 0x00000002
-#define IXGB_TCTL_TPDE 0x00000004
-
-#define IXGB_TCTL_IDLE_TX_UNIT 0
-
-/* TXDCTL Bit Masks */
-#define IXGB_TXDCTL_PTHRESH_MASK 0x0000007F
-#define IXGB_TXDCTL_HTHRESH_MASK 0x00007F00
-#define IXGB_TXDCTL_HTHRESH_SHIFT 8
-#define IXGB_TXDCTL_WTHRESH_MASK 0x007F0000
-#define IXGB_TXDCTL_WTHRESH_SHIFT 16
-
-/* TSPMT Bit Masks */
-#define IXGB_TSPMT_TSMT_MASK 0x0000FFFF
-#define IXGB_TSPMT_TSPBP_MASK 0xFFFF0000
-#define IXGB_TSPMT_TSPBP_SHIFT 16
-
-/* PAP Bit Masks */
-#define IXGB_PAP_TXPC_MASK 0x0000FFFF
-#define IXGB_PAP_TXPV_MASK 0x000F0000
-#define IXGB_PAP_TXPV_10G 0x00000000
-#define IXGB_PAP_TXPV_1G 0x00010000
-#define IXGB_PAP_TXPV_2G 0x00020000
-#define IXGB_PAP_TXPV_3G 0x00030000
-#define IXGB_PAP_TXPV_4G 0x00040000
-#define IXGB_PAP_TXPV_5G 0x00050000
-#define IXGB_PAP_TXPV_6G 0x00060000
-#define IXGB_PAP_TXPV_7G 0x00070000
-#define IXGB_PAP_TXPV_8G 0x00080000
-#define IXGB_PAP_TXPV_9G 0x00090000
-#define IXGB_PAP_TXPV_WAN 0x000F0000
-
-/* PCSC1 Bit Masks */
-#define IXGB_PCSC1_LOOPBACK 0x00004000
-
-/* PCSC2 Bit Masks */
-#define IXGB_PCSC2_PCS_TYPE_MASK 0x00000003
-#define IXGB_PCSC2_PCS_TYPE_10GBX 0x00000001
-
-/* PCSS1 Bit Masks */
-#define IXGB_PCSS1_LOCAL_FAULT 0x00000080
-#define IXGB_PCSS1_RX_LINK_STATUS 0x00000004
-
-/* PCSS2 Bit Masks */
-#define IXGB_PCSS2_DEV_PRES_MASK 0x0000C000
-#define IXGB_PCSS2_DEV_PRES 0x00004000
-#define IXGB_PCSS2_TX_LF 0x00000800
-#define IXGB_PCSS2_RX_LF 0x00000400
-#define IXGB_PCSS2_10GBW 0x00000004
-#define IXGB_PCSS2_10GBX 0x00000002
-#define IXGB_PCSS2_10GBR 0x00000001
-
-/* XPCSS Bit Masks */
-#define IXGB_XPCSS_ALIGN_STATUS 0x00001000
-#define IXGB_XPCSS_PATTERN_TEST 0x00000800
-#define IXGB_XPCSS_LANE_3_SYNC 0x00000008
-#define IXGB_XPCSS_LANE_2_SYNC 0x00000004
-#define IXGB_XPCSS_LANE_1_SYNC 0x00000002
-#define IXGB_XPCSS_LANE_0_SYNC 0x00000001
-
-/* XPCSTC Bit Masks */
-#define IXGB_XPCSTC_BERT_TRIG 0x00200000
-#define IXGB_XPCSTC_BERT_SST 0x00100000
-#define IXGB_XPCSTC_BERT_PSZ_MASK 0x000C0000
-#define IXGB_XPCSTC_BERT_PSZ_SHIFT 17
-#define IXGB_XPCSTC_BERT_PSZ_INF 0x00000003
-#define IXGB_XPCSTC_BERT_PSZ_68 0x00000001
-#define IXGB_XPCSTC_BERT_PSZ_1028 0x00000000
-
-/* MSCA bit Masks */
-/* New Protocol Address */
-#define IXGB_MSCA_NP_ADDR_MASK 0x0000FFFF
-#define IXGB_MSCA_NP_ADDR_SHIFT 0
-/* Either Device Type or Register Address,depending on ST_CODE */
-#define IXGB_MSCA_DEV_TYPE_MASK 0x001F0000
-#define IXGB_MSCA_DEV_TYPE_SHIFT 16
-#define IXGB_MSCA_PHY_ADDR_MASK 0x03E00000
-#define IXGB_MSCA_PHY_ADDR_SHIFT 21
-#define IXGB_MSCA_OP_CODE_MASK 0x0C000000
-/* OP_CODE == 00, Address cycle, New Protocol */
-/* OP_CODE == 01, Write operation */
-/* OP_CODE == 10, Read operation */
-/* OP_CODE == 11, Read, auto increment, New Protocol */
-#define IXGB_MSCA_ADDR_CYCLE 0x00000000
-#define IXGB_MSCA_WRITE 0x04000000
-#define IXGB_MSCA_READ 0x08000000
-#define IXGB_MSCA_READ_AUTOINC 0x0C000000
-#define IXGB_MSCA_OP_CODE_SHIFT 26
-#define IXGB_MSCA_ST_CODE_MASK 0x30000000
-/* ST_CODE == 00, New Protocol */
-/* ST_CODE == 01, Old Protocol */
-#define IXGB_MSCA_NEW_PROTOCOL 0x00000000
-#define IXGB_MSCA_OLD_PROTOCOL 0x10000000
-#define IXGB_MSCA_ST_CODE_SHIFT 28
-/* Initiate command, self-clearing when command completes */
-#define IXGB_MSCA_MDI_COMMAND 0x40000000
-/*MDI In Progress Enable. */
-#define IXGB_MSCA_MDI_IN_PROG_EN 0x80000000
-
-/* MSRWD bit masks */
-#define IXGB_MSRWD_WRITE_DATA_MASK 0x0000FFFF
-#define IXGB_MSRWD_WRITE_DATA_SHIFT 0
-#define IXGB_MSRWD_READ_DATA_MASK 0xFFFF0000
-#define IXGB_MSRWD_READ_DATA_SHIFT 16
-
-/* Definitions for the optics devices on the MDIO bus. */
-#define IXGB_PHY_ADDRESS 0x0 /* Single PHY, multiple "Devices" */
-
-#define MDIO_PMA_PMD_XPAK_VENDOR_NAME 0x803A /* XPAK/XENPAK devices only */
-
-/* Vendor-specific MDIO registers */
-#define G6XXX_PMA_PMD_VS1 0xC001 /* Vendor-specific register */
-#define G6XXX_XGXS_XAUI_VS2 0x18 /* Vendor-specific register */
-
-#define G6XXX_PMA_PMD_VS1_PLL_RESET 0x80
-#define G6XXX_PMA_PMD_VS1_REMOVE_PLL_RESET 0x00
-#define G6XXX_XGXS_XAUI_VS2_INPUT_MASK 0x0F /* XAUI lanes synchronized */
-
-/* Layout of a single receive descriptor. The controller assumes that this
- * structure is packed into 16 bytes, which is a safe assumption with most
- * compilers. However, some compilers may insert padding between the fields,
- * in which case the structure must be packed in some compiler-specific
- * manner. */
-struct ixgb_rx_desc {
- __le64 buff_addr;
- __le16 length;
- __le16 reserved;
- u8 status;
- u8 errors;
- __le16 special;
-};
-
-#define IXGB_RX_DESC_STATUS_DD 0x01
-#define IXGB_RX_DESC_STATUS_EOP 0x02
-#define IXGB_RX_DESC_STATUS_IXSM 0x04
-#define IXGB_RX_DESC_STATUS_VP 0x08
-#define IXGB_RX_DESC_STATUS_TCPCS 0x20
-#define IXGB_RX_DESC_STATUS_IPCS 0x40
-#define IXGB_RX_DESC_STATUS_PIF 0x80
-
-#define IXGB_RX_DESC_ERRORS_CE 0x01
-#define IXGB_RX_DESC_ERRORS_SE 0x02
-#define IXGB_RX_DESC_ERRORS_P 0x08
-#define IXGB_RX_DESC_ERRORS_TCPE 0x20
-#define IXGB_RX_DESC_ERRORS_IPE 0x40
-#define IXGB_RX_DESC_ERRORS_RXE 0x80
-
-#define IXGB_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define IXGB_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define IXGB_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */
-
-/* Layout of a single transmit descriptor. The controller assumes that this
- * structure is packed into 16 bytes, which is a safe assumption with most
- * compilers. However, some compilers may insert padding between the fields,
- * in which case the structure must be packed in some compiler-specific
- * manner. */
-struct ixgb_tx_desc {
- __le64 buff_addr;
- __le32 cmd_type_len;
- u8 status;
- u8 popts;
- __le16 vlan;
-};
-
-#define IXGB_TX_DESC_LENGTH_MASK 0x000FFFFF
-#define IXGB_TX_DESC_TYPE_MASK 0x00F00000
-#define IXGB_TX_DESC_TYPE_SHIFT 20
-#define IXGB_TX_DESC_CMD_MASK 0xFF000000
-#define IXGB_TX_DESC_CMD_SHIFT 24
-#define IXGB_TX_DESC_CMD_EOP 0x01000000
-#define IXGB_TX_DESC_CMD_TSE 0x04000000
-#define IXGB_TX_DESC_CMD_RS 0x08000000
-#define IXGB_TX_DESC_CMD_VLE 0x40000000
-#define IXGB_TX_DESC_CMD_IDE 0x80000000
-
-#define IXGB_TX_DESC_TYPE 0x00100000
-
-#define IXGB_TX_DESC_STATUS_DD 0x01
-
-#define IXGB_TX_DESC_POPTS_IXSM 0x01
-#define IXGB_TX_DESC_POPTS_TXSM 0x02
-#define IXGB_TX_DESC_SPECIAL_PRI_SHIFT IXGB_RX_DESC_SPECIAL_PRI_SHIFT /* Priority is in upper 3 of 16 */
-
-struct ixgb_context_desc {
- u8 ipcss;
- u8 ipcso;
- __le16 ipcse;
- u8 tucss;
- u8 tucso;
- __le16 tucse;
- __le32 cmd_type_len;
- u8 status;
- u8 hdr_len;
- __le16 mss;
-};
-
-#define IXGB_CONTEXT_DESC_CMD_TCP 0x01000000
-#define IXGB_CONTEXT_DESC_CMD_IP 0x02000000
-#define IXGB_CONTEXT_DESC_CMD_TSE 0x04000000
-#define IXGB_CONTEXT_DESC_CMD_RS 0x08000000
-#define IXGB_CONTEXT_DESC_CMD_IDE 0x80000000
-
-#define IXGB_CONTEXT_DESC_TYPE 0x00000000
-
-#define IXGB_CONTEXT_DESC_STATUS_DD 0x01
-
-/* Filters */
-#define IXGB_MC_TBL_SIZE 128 /* Multicast Filter Table (4096 bits) */
-#define IXGB_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */
-#define IXGB_RAR_ENTRIES 3 /* Number of entries in Rx Address array */
-
-#define IXGB_MEMORY_REGISTER_BASE_ADDRESS 0
-#define ENET_HEADER_SIZE 14
-#define ENET_FCS_LENGTH 4
-#define IXGB_MAX_NUM_MULTICAST_ADDRESSES 128
-#define IXGB_MIN_ENET_FRAME_SIZE_WITHOUT_FCS 60
-#define IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS 1514
-#define IXGB_MAX_JUMBO_FRAME_SIZE 0x3F00
-
-/* Phy Addresses */
-#define IXGB_OPTICAL_PHY_ADDR 0x0 /* Optical Module phy address */
-#define IXGB_XAUII_PHY_ADDR 0x1 /* Xauii transceiver phy address */
-#define IXGB_DIAG_PHY_ADDR 0x1F /* Diagnostic Device phy address */
-
-/* This structure takes a 64k flash and maps it for identification commands */
-struct ixgb_flash_buffer {
- u8 manufacturer_id;
- u8 device_id;
- u8 filler1[0x2AA8];
- u8 cmd2;
- u8 filler2[0x2AAA];
- u8 cmd1;
- u8 filler3[0xAAAA];
-};
-
-/* Flow control parameters */
-struct ixgb_fc {
- u32 high_water; /* Flow Control High-water */
- u32 low_water; /* Flow Control Low-water */
- u16 pause_time; /* Flow Control Pause timer */
- bool send_xon; /* Flow control send XON */
- ixgb_fc_type type; /* Type of flow control */
-};
-
-/* The historical defaults for the flow control values are given below. */
-#define FC_DEFAULT_HI_THRESH (0x8000) /* 32KB */
-#define FC_DEFAULT_LO_THRESH (0x4000) /* 16KB */
-#define FC_DEFAULT_TX_TIMER (0x100) /* ~130 us */
-
-/* Phy definitions */
-#define IXGB_MAX_PHY_REG_ADDRESS 0xFFFF
-#define IXGB_MAX_PHY_ADDRESS 31
-#define IXGB_MAX_PHY_DEV_TYPE 31
-
-/* Bus parameters */
-struct ixgb_bus {
- ixgb_bus_speed speed;
- ixgb_bus_width width;
- ixgb_bus_type type;
-};
-
-struct ixgb_hw {
- u8 __iomem *hw_addr;/* Base Address of the hardware */
- void *back; /* Pointer to OS-dependent struct */
- struct ixgb_fc fc; /* Flow control parameters */
- struct ixgb_bus bus; /* Bus parameters */
- u32 phy_id; /* Phy Identifier */
- u32 phy_addr; /* XGMII address of Phy */
- ixgb_mac_type mac_type; /* Identifier for MAC controller */
- ixgb_phy_type phy_type; /* Transceiver/phy identifier */
- u32 max_frame_size; /* Maximum frame size supported */
- u32 mc_filter_type; /* Multicast filter hash type */
- u32 num_mc_addrs; /* Number of current Multicast addrs */
- u8 curr_mac_addr[IXGB_ETH_LENGTH_OF_ADDRESS]; /* Individual address currently programmed in MAC */
- u32 num_tx_desc; /* Number of Transmit descriptors */
- u32 num_rx_desc; /* Number of Receive descriptors */
- u32 rx_buffer_size; /* Size of Receive buffer */
- bool link_up; /* true if link is valid */
- bool adapter_stopped; /* State of adapter */
- u16 device_id; /* device id from PCI configuration space */
- u16 vendor_id; /* vendor id from PCI configuration space */
- u8 revision_id; /* revision id from PCI configuration space */
- u16 subsystem_vendor_id; /* subsystem vendor id from PCI configuration space */
- u16 subsystem_id; /* subsystem id from PCI configuration space */
- u32 bar0; /* Base Address registers */
- u32 bar1;
- u32 bar2;
- u32 bar3;
- u16 pci_cmd_word; /* PCI command register id from PCI configuration space */
- __le16 eeprom[IXGB_EEPROM_SIZE]; /* EEPROM contents read at init time */
- unsigned long io_base; /* Our I/O mapped location */
- u32 lastLFC;
- u32 lastRFC;
-};
-
-/* Statistics reported by the hardware */
-struct ixgb_hw_stats {
- u64 tprl;
- u64 tprh;
- u64 gprcl;
- u64 gprch;
- u64 bprcl;
- u64 bprch;
- u64 mprcl;
- u64 mprch;
- u64 uprcl;
- u64 uprch;
- u64 vprcl;
- u64 vprch;
- u64 jprcl;
- u64 jprch;
- u64 gorcl;
- u64 gorch;
- u64 torl;
- u64 torh;
- u64 rnbc;
- u64 ruc;
- u64 roc;
- u64 rlec;
- u64 crcerrs;
- u64 icbc;
- u64 ecbc;
- u64 mpc;
- u64 tptl;
- u64 tpth;
- u64 gptcl;
- u64 gptch;
- u64 bptcl;
- u64 bptch;
- u64 mptcl;
- u64 mptch;
- u64 uptcl;
- u64 uptch;
- u64 vptcl;
- u64 vptch;
- u64 jptcl;
- u64 jptch;
- u64 gotcl;
- u64 gotch;
- u64 totl;
- u64 toth;
- u64 dc;
- u64 plt64c;
- u64 tsctc;
- u64 tsctfc;
- u64 ibic;
- u64 rfc;
- u64 lfc;
- u64 pfrc;
- u64 pftc;
- u64 mcfrc;
- u64 mcftc;
- u64 xonrxc;
- u64 xontxc;
- u64 xoffrxc;
- u64 xofftxc;
- u64 rjc;
-};
-
-/* Function Prototypes */
-extern bool ixgb_adapter_stop(struct ixgb_hw *hw);
-extern bool ixgb_init_hw(struct ixgb_hw *hw);
-extern bool ixgb_adapter_start(struct ixgb_hw *hw);
-extern void ixgb_check_for_link(struct ixgb_hw *hw);
-extern bool ixgb_check_for_bad_link(struct ixgb_hw *hw);
-
-extern void ixgb_rar_set(struct ixgb_hw *hw,
- u8 *addr,
- u32 index);
-
-
-/* Filters (multicast, vlan, receive) */
-extern void ixgb_mc_addr_list_update(struct ixgb_hw *hw,
- u8 *mc_addr_list,
- u32 mc_addr_count,
- u32 pad);
-
-/* Vfta functions */
-extern void ixgb_write_vfta(struct ixgb_hw *hw,
- u32 offset,
- u32 value);
-
-/* Access functions to eeprom data */
-void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, u8 *mac_addr);
-u32 ixgb_get_ee_pba_number(struct ixgb_hw *hw);
-u16 ixgb_get_ee_device_id(struct ixgb_hw *hw);
-bool ixgb_get_eeprom_data(struct ixgb_hw *hw);
-__le16 ixgb_get_eeprom_word(struct ixgb_hw *hw, u16 index);
-
-/* Everything else */
-void ixgb_led_on(struct ixgb_hw *hw);
-void ixgb_led_off(struct ixgb_hw *hw);
-void ixgb_write_pci_cfg(struct ixgb_hw *hw,
- u32 reg,
- u16 * value);
-
-
-#endif /* _IXGB_HW_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGB_IDS_H_
-#define _IXGB_IDS_H_
-
-/**********************************************************************
-** The Device and Vendor IDs for 10 Gigabit MACs
-**********************************************************************/
-
-#define INTEL_VENDOR_ID 0x8086
-#define INTEL_SUBVENDOR_ID 0x8086
-#define SUN_VENDOR_ID 0x108E
-#define SUN_SUBVENDOR_ID 0x108E
-
-#define IXGB_DEVICE_ID_82597EX 0x1048
-#define IXGB_DEVICE_ID_82597EX_SR 0x1A48
-#define IXGB_DEVICE_ID_82597EX_LR 0x1B48
-#define IXGB_SUBDEVICE_ID_A11F 0xA11F
-#define IXGB_SUBDEVICE_ID_A01F 0xA01F
-
-#define IXGB_DEVICE_ID_82597EX_CX4 0x109E
-#define IXGB_SUBDEVICE_ID_A00C 0xA00C
-#define IXGB_SUBDEVICE_ID_A01C 0xA01C
-#define IXGB_SUBDEVICE_ID_7036 0x7036
-
-#endif /* #ifndef _IXGB_IDS_H_ */
-/* End of File */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/prefetch.h>
-#include "ixgb.h"
-
-char ixgb_driver_name[] = "ixgb";
-static char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
-
-#define DRIVERNAPI "-NAPI"
-#define DRV_VERSION "1.0.135-k2" DRIVERNAPI
-const char ixgb_driver_version[] = DRV_VERSION;
-static const char ixgb_copyright[] = "Copyright (c) 1999-2008 Intel Corporation.";
-
-#define IXGB_CB_LENGTH 256
-static unsigned int copybreak __read_mostly = IXGB_CB_LENGTH;
-module_param(copybreak, uint, 0644);
-MODULE_PARM_DESC(copybreak,
- "Maximum size of packet that is copied to a new buffer on receive");
-
-/* ixgb_pci_tbl - PCI Device ID Table
- *
- * Wildcard entries (PCI_ANY_ID) should come last
- * Last entry must be all 0s
- *
- * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
- * Class, Class Mask, private data (not used) }
- */
-static DEFINE_PCI_DEVICE_TABLE(ixgb_pci_tbl) = {
- {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_CX4,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_SR,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- {INTEL_VENDOR_ID, IXGB_DEVICE_ID_82597EX_LR,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-
- /* required last entry */
- {0,}
-};
-
-MODULE_DEVICE_TABLE(pci, ixgb_pci_tbl);
-
-/* Local Function Prototypes */
-static int ixgb_init_module(void);
-static void ixgb_exit_module(void);
-static int ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void __devexit ixgb_remove(struct pci_dev *pdev);
-static int ixgb_sw_init(struct ixgb_adapter *adapter);
-static int ixgb_open(struct net_device *netdev);
-static int ixgb_close(struct net_device *netdev);
-static void ixgb_configure_tx(struct ixgb_adapter *adapter);
-static void ixgb_configure_rx(struct ixgb_adapter *adapter);
-static void ixgb_setup_rctl(struct ixgb_adapter *adapter);
-static void ixgb_clean_tx_ring(struct ixgb_adapter *adapter);
-static void ixgb_clean_rx_ring(struct ixgb_adapter *adapter);
-static void ixgb_set_multi(struct net_device *netdev);
-static void ixgb_watchdog(unsigned long data);
-static netdev_tx_t ixgb_xmit_frame(struct sk_buff *skb,
- struct net_device *netdev);
-static struct net_device_stats *ixgb_get_stats(struct net_device *netdev);
-static int ixgb_change_mtu(struct net_device *netdev, int new_mtu);
-static int ixgb_set_mac(struct net_device *netdev, void *p);
-static irqreturn_t ixgb_intr(int irq, void *data);
-static bool ixgb_clean_tx_irq(struct ixgb_adapter *adapter);
-
-static int ixgb_clean(struct napi_struct *, int);
-static bool ixgb_clean_rx_irq(struct ixgb_adapter *, int *, int);
-static void ixgb_alloc_rx_buffers(struct ixgb_adapter *, int);
-
-static void ixgb_tx_timeout(struct net_device *dev);
-static void ixgb_tx_timeout_task(struct work_struct *work);
-
-static void ixgb_vlan_strip_enable(struct ixgb_adapter *adapter);
-static void ixgb_vlan_strip_disable(struct ixgb_adapter *adapter);
-static void ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid);
-static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid);
-static void ixgb_restore_vlan(struct ixgb_adapter *adapter);
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/* for netdump / net console */
-static void ixgb_netpoll(struct net_device *dev);
-#endif
-
-static pci_ers_result_t ixgb_io_error_detected (struct pci_dev *pdev,
- enum pci_channel_state state);
-static pci_ers_result_t ixgb_io_slot_reset (struct pci_dev *pdev);
-static void ixgb_io_resume (struct pci_dev *pdev);
-
-static struct pci_error_handlers ixgb_err_handler = {
- .error_detected = ixgb_io_error_detected,
- .slot_reset = ixgb_io_slot_reset,
- .resume = ixgb_io_resume,
-};
-
-static struct pci_driver ixgb_driver = {
- .name = ixgb_driver_name,
- .id_table = ixgb_pci_tbl,
- .probe = ixgb_probe,
- .remove = __devexit_p(ixgb_remove),
- .err_handler = &ixgb_err_handler
-};
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
-MODULE_DESCRIPTION("Intel(R) PRO/10GbE Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-static int debug = DEFAULT_DEBUG_LEVEL_SHIFT;
-module_param(debug, int, 0);
-MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)");
-
-/**
- * ixgb_init_module - Driver Registration Routine
- *
- * ixgb_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-
-static int __init
-ixgb_init_module(void)
-{
- pr_info("%s - version %s\n", ixgb_driver_string, ixgb_driver_version);
- pr_info("%s\n", ixgb_copyright);
-
- return pci_register_driver(&ixgb_driver);
-}
-
-module_init(ixgb_init_module);
-
-/**
- * ixgb_exit_module - Driver Exit Cleanup Routine
- *
- * ixgb_exit_module is called just before the driver is removed
- * from memory.
- **/
-
-static void __exit
-ixgb_exit_module(void)
-{
- pci_unregister_driver(&ixgb_driver);
-}
-
-module_exit(ixgb_exit_module);
-
-/**
- * ixgb_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-
-static void
-ixgb_irq_disable(struct ixgb_adapter *adapter)
-{
- IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
- IXGB_WRITE_FLUSH(&adapter->hw);
- synchronize_irq(adapter->pdev->irq);
-}
-
-/**
- * ixgb_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-
-static void
-ixgb_irq_enable(struct ixgb_adapter *adapter)
-{
- u32 val = IXGB_INT_RXT0 | IXGB_INT_RXDMT0 |
- IXGB_INT_TXDW | IXGB_INT_LSC;
- if (adapter->hw.subsystem_vendor_id == SUN_SUBVENDOR_ID)
- val |= IXGB_INT_GPI0;
- IXGB_WRITE_REG(&adapter->hw, IMS, val);
- IXGB_WRITE_FLUSH(&adapter->hw);
-}
-
-int
-ixgb_up(struct ixgb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err, irq_flags = IRQF_SHARED;
- int max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- struct ixgb_hw *hw = &adapter->hw;
-
- /* hardware has been reset, we need to reload some things */
-
- ixgb_rar_set(hw, netdev->dev_addr, 0);
- ixgb_set_multi(netdev);
-
- ixgb_restore_vlan(adapter);
-
- ixgb_configure_tx(adapter);
- ixgb_setup_rctl(adapter);
- ixgb_configure_rx(adapter);
- ixgb_alloc_rx_buffers(adapter, IXGB_DESC_UNUSED(&adapter->rx_ring));
-
- /* disable interrupts and get the hardware into a known state */
- IXGB_WRITE_REG(&adapter->hw, IMC, 0xffffffff);
-
- /* only enable MSI if bus is in PCI-X mode */
- if (IXGB_READ_REG(&adapter->hw, STATUS) & IXGB_STATUS_PCIX_MODE) {
- err = pci_enable_msi(adapter->pdev);
- if (!err) {
- adapter->have_msi = 1;
- irq_flags = 0;
- }
- /* proceed to try to request regular interrupt */
- }
-
- err = request_irq(adapter->pdev->irq, ixgb_intr, irq_flags,
- netdev->name, netdev);
- if (err) {
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate interrupt Error: %d\n", err);
- return err;
- }
-
- if ((hw->max_frame_size != max_frame) ||
- (hw->max_frame_size !=
- (IXGB_READ_REG(hw, MFS) >> IXGB_MFS_SHIFT))) {
-
- hw->max_frame_size = max_frame;
-
- IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
-
- if (hw->max_frame_size >
- IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
- u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
-
- if (!(ctrl0 & IXGB_CTRL0_JFE)) {
- ctrl0 |= IXGB_CTRL0_JFE;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0);
- }
- }
- }
-
- clear_bit(__IXGB_DOWN, &adapter->flags);
-
- napi_enable(&adapter->napi);
- ixgb_irq_enable(adapter);
-
- netif_wake_queue(netdev);
-
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- return 0;
-}
-
-void
-ixgb_down(struct ixgb_adapter *adapter, bool kill_watchdog)
-{
- struct net_device *netdev = adapter->netdev;
-
- /* prevent the interrupt handler from restarting watchdog */
- set_bit(__IXGB_DOWN, &adapter->flags);
-
- napi_disable(&adapter->napi);
- /* waiting for NAPI to complete can re-enable interrupts */
- ixgb_irq_disable(adapter);
- free_irq(adapter->pdev->irq, netdev);
-
- if (adapter->have_msi)
- pci_disable_msi(adapter->pdev);
-
- if (kill_watchdog)
- del_timer_sync(&adapter->watchdog_timer);
-
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
-
- ixgb_reset(adapter);
- ixgb_clean_tx_ring(adapter);
- ixgb_clean_rx_ring(adapter);
-}
-
-void
-ixgb_reset(struct ixgb_adapter *adapter)
-{
- struct ixgb_hw *hw = &adapter->hw;
-
- ixgb_adapter_stop(hw);
- if (!ixgb_init_hw(hw))
- netif_err(adapter, probe, adapter->netdev, "ixgb_init_hw failed\n");
-
- /* restore frame size information */
- IXGB_WRITE_REG(hw, MFS, hw->max_frame_size << IXGB_MFS_SHIFT);
- if (hw->max_frame_size >
- IXGB_MAX_ENET_FRAME_SIZE_WITHOUT_FCS + ENET_FCS_LENGTH) {
- u32 ctrl0 = IXGB_READ_REG(hw, CTRL0);
- if (!(ctrl0 & IXGB_CTRL0_JFE)) {
- ctrl0 |= IXGB_CTRL0_JFE;
- IXGB_WRITE_REG(hw, CTRL0, ctrl0);
- }
- }
-}
-
-static const struct net_device_ops ixgb_netdev_ops = {
- .ndo_open = ixgb_open,
- .ndo_stop = ixgb_close,
- .ndo_start_xmit = ixgb_xmit_frame,
- .ndo_get_stats = ixgb_get_stats,
- .ndo_set_multicast_list = ixgb_set_multi,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = ixgb_set_mac,
- .ndo_change_mtu = ixgb_change_mtu,
- .ndo_tx_timeout = ixgb_tx_timeout,
- .ndo_vlan_rx_add_vid = ixgb_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = ixgb_vlan_rx_kill_vid,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ixgb_netpoll,
-#endif
-};
-
-/**
- * ixgb_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in ixgb_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * ixgb_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-
-static int __devinit
-ixgb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- struct net_device *netdev = NULL;
- struct ixgb_adapter *adapter;
- static int cards_found = 0;
- int pci_using_dac;
- int i;
- int err;
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
-
- pci_using_dac = 0;
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err) {
- err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64));
- if (!err)
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
- DMA_BIT_MASK(32));
- if (err) {
- pr_err("No usable DMA configuration, aborting\n");
- goto err_dma_mask;
- }
- }
- }
-
- err = pci_request_regions(pdev, ixgb_driver_name);
- if (err)
- goto err_request_regions;
-
- pci_set_master(pdev);
-
- netdev = alloc_etherdev(sizeof(struct ixgb_adapter));
- if (!netdev) {
- err = -ENOMEM;
- goto err_alloc_etherdev;
- }
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- adapter->hw.back = adapter;
- adapter->msg_enable = netif_msg_init(debug, DEFAULT_DEBUG_LEVEL_SHIFT);
-
- adapter->hw.hw_addr = pci_ioremap_bar(pdev, BAR_0);
- if (!adapter->hw.hw_addr) {
- err = -EIO;
- goto err_ioremap;
- }
-
- for (i = BAR_1; i <= BAR_5; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- if (pci_resource_flags(pdev, i) & IORESOURCE_IO) {
- adapter->hw.io_base = pci_resource_start(pdev, i);
- break;
- }
- }
-
- netdev->netdev_ops = &ixgb_netdev_ops;
- ixgb_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- netif_napi_add(netdev, &adapter->napi, ixgb_clean, 64);
-
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- adapter->bd_number = cards_found;
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
-
- /* setup the private structure */
-
- err = ixgb_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- netdev->features = NETIF_F_SG |
- NETIF_F_HW_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
- netdev->features |= NETIF_F_TSO;
-
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- /* make sure the EEPROM is good */
-
- if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
- netif_err(adapter, probe, adapter->netdev,
- "The EEPROM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
- memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- netif_err(adapter, probe, adapter->netdev, "Invalid MAC Address\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- adapter->part_num = ixgb_get_ee_pba_number(&adapter->hw);
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = ixgb_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
-
- INIT_WORK(&adapter->tx_timeout_task, ixgb_tx_timeout_task);
-
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
- netif_info(adapter, probe, adapter->netdev,
- "Intel(R) PRO/10GbE Network Connection\n");
- ixgb_check_options(adapter);
- /* reset the hardware with the new settings */
-
- ixgb_reset(adapter);
-
- cards_found++;
- return 0;
-
-err_register:
-err_sw_init:
-err_eeprom:
- iounmap(adapter->hw.hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_regions(pdev);
-err_request_regions:
-err_dma_mask:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * ixgb_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * ixgb_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-
-static void __devexit
-ixgb_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- cancel_work_sync(&adapter->tx_timeout_task);
-
- unregister_netdev(netdev);
-
- iounmap(adapter->hw.hw_addr);
- pci_release_regions(pdev);
-
- free_netdev(netdev);
- pci_disable_device(pdev);
-}
-
-/**
- * ixgb_sw_init - Initialize general software structures (struct ixgb_adapter)
- * @adapter: board private structure to initialize
- *
- * ixgb_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-
-static int __devinit
-ixgb_sw_init(struct ixgb_adapter *adapter)
-{
- struct ixgb_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_id = pdev->subsystem_device;
-
- hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- adapter->rx_buffer_len = hw->max_frame_size + 8; /* + 8 for errata */
-
- if ((hw->device_id == IXGB_DEVICE_ID_82597EX) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_CX4) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_LR) ||
- (hw->device_id == IXGB_DEVICE_ID_82597EX_SR))
- hw->mac_type = ixgb_82597;
- else {
- /* should never have loaded on this device */
- netif_err(adapter, probe, adapter->netdev, "unsupported device id\n");
- }
-
- /* enable flow control to be programmed */
- hw->fc.send_xon = 1;
-
- set_bit(__IXGB_DOWN, &adapter->flags);
- return 0;
-}
-
-/**
- * ixgb_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-
-static int
-ixgb_open(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int err;
-
- /* allocate transmit descriptors */
- err = ixgb_setup_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- netif_carrier_off(netdev);
-
- /* allocate receive descriptors */
-
- err = ixgb_setup_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- err = ixgb_up(adapter);
- if (err)
- goto err_up;
-
- netif_start_queue(netdev);
-
- return 0;
-
-err_up:
- ixgb_free_rx_resources(adapter);
-err_setup_rx:
- ixgb_free_tx_resources(adapter);
-err_setup_tx:
- ixgb_reset(adapter);
-
- return err;
-}
-
-/**
- * ixgb_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-
-static int
-ixgb_close(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- ixgb_down(adapter, true);
-
- ixgb_free_tx_resources(adapter);
- ixgb_free_rx_resources(adapter);
-
- return 0;
-}
-
-/**
- * ixgb_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- *
- * Return 0 on success, negative on failure
- **/
-
-int
-ixgb_setup_tx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgb_buffer) * txdr->count;
- txdr->buffer_info = vzalloc(size);
- if (!txdr->buffer_info) {
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate transmit descriptor ring memory\n");
- return -ENOMEM;
- }
-
- /* round up to nearest 4K */
-
- txdr->size = txdr->count * sizeof(struct ixgb_tx_desc);
- txdr->size = ALIGN(txdr->size, 4096);
-
- txdr->desc = dma_alloc_coherent(&pdev->dev, txdr->size, &txdr->dma,
- GFP_KERNEL);
- if (!txdr->desc) {
- vfree(txdr->buffer_info);
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate transmit descriptor memory\n");
- return -ENOMEM;
- }
- memset(txdr->desc, 0, txdr->size);
-
- txdr->next_to_use = 0;
- txdr->next_to_clean = 0;
-
- return 0;
-}
-
-/**
- * ixgb_configure_tx - Configure 82597 Transmit Unit after Reset.
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-
-static void
-ixgb_configure_tx(struct ixgb_adapter *adapter)
-{
- u64 tdba = adapter->tx_ring.dma;
- u32 tdlen = adapter->tx_ring.count * sizeof(struct ixgb_tx_desc);
- u32 tctl;
- struct ixgb_hw *hw = &adapter->hw;
-
- /* Setup the Base and Length of the Tx Descriptor Ring
- * tx_ring.dma can be either a 32 or 64 bit value
- */
-
- IXGB_WRITE_REG(hw, TDBAL, (tdba & 0x00000000ffffffffULL));
- IXGB_WRITE_REG(hw, TDBAH, (tdba >> 32));
-
- IXGB_WRITE_REG(hw, TDLEN, tdlen);
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
-
- IXGB_WRITE_REG(hw, TDH, 0);
- IXGB_WRITE_REG(hw, TDT, 0);
-
- /* don't set up txdctl, it induces performance problems if configured
- * incorrectly */
- /* Set the Tx Interrupt Delay register */
-
- IXGB_WRITE_REG(hw, TIDV, adapter->tx_int_delay);
-
- /* Program the Transmit Control Register */
-
- tctl = IXGB_TCTL_TCE | IXGB_TCTL_TXEN | IXGB_TCTL_TPDE;
- IXGB_WRITE_REG(hw, TCTL, tctl);
-
- /* Setup Transmit Descriptor Settings for this adapter */
- adapter->tx_cmd_type =
- IXGB_TX_DESC_TYPE |
- (adapter->tx_int_delay_enable ? IXGB_TX_DESC_CMD_IDE : 0);
-}
-
-/**
- * ixgb_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- *
- * Returns 0 on success, negative on failure
- **/
-
-int
-ixgb_setup_rx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgb_buffer) * rxdr->count;
- rxdr->buffer_info = vzalloc(size);
- if (!rxdr->buffer_info) {
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate receive descriptor ring\n");
- return -ENOMEM;
- }
-
- /* Round up to nearest 4K */
-
- rxdr->size = rxdr->count * sizeof(struct ixgb_rx_desc);
- rxdr->size = ALIGN(rxdr->size, 4096);
-
- rxdr->desc = dma_alloc_coherent(&pdev->dev, rxdr->size, &rxdr->dma,
- GFP_KERNEL);
-
- if (!rxdr->desc) {
- vfree(rxdr->buffer_info);
- netif_err(adapter, probe, adapter->netdev,
- "Unable to allocate receive descriptors\n");
- return -ENOMEM;
- }
- memset(rxdr->desc, 0, rxdr->size);
-
- rxdr->next_to_clean = 0;
- rxdr->next_to_use = 0;
-
- return 0;
-}
-
-/**
- * ixgb_setup_rctl - configure the receive control register
- * @adapter: Board private structure
- **/
-
-static void
-ixgb_setup_rctl(struct ixgb_adapter *adapter)
-{
- u32 rctl;
-
- rctl = IXGB_READ_REG(&adapter->hw, RCTL);
-
- rctl &= ~(3 << IXGB_RCTL_MO_SHIFT);
-
- rctl |=
- IXGB_RCTL_BAM | IXGB_RCTL_RDMTS_1_2 |
- IXGB_RCTL_RXEN | IXGB_RCTL_CFF |
- (adapter->hw.mc_filter_type << IXGB_RCTL_MO_SHIFT);
-
- rctl |= IXGB_RCTL_SECRC;
-
- if (adapter->rx_buffer_len <= IXGB_RXBUFFER_2048)
- rctl |= IXGB_RCTL_BSIZE_2048;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_4096)
- rctl |= IXGB_RCTL_BSIZE_4096;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_8192)
- rctl |= IXGB_RCTL_BSIZE_8192;
- else if (adapter->rx_buffer_len <= IXGB_RXBUFFER_16384)
- rctl |= IXGB_RCTL_BSIZE_16384;
-
- IXGB_WRITE_REG(&adapter->hw, RCTL, rctl);
-}
-
-/**
- * ixgb_configure_rx - Configure 82597 Receive Unit after Reset.
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-
-static void
-ixgb_configure_rx(struct ixgb_adapter *adapter)
-{
- u64 rdba = adapter->rx_ring.dma;
- u32 rdlen = adapter->rx_ring.count * sizeof(struct ixgb_rx_desc);
- struct ixgb_hw *hw = &adapter->hw;
- u32 rctl;
- u32 rxcsum;
-
- /* make sure receives are disabled while setting up the descriptors */
-
- rctl = IXGB_READ_REG(hw, RCTL);
- IXGB_WRITE_REG(hw, RCTL, rctl & ~IXGB_RCTL_RXEN);
-
- /* set the Receive Delay Timer Register */
-
- IXGB_WRITE_REG(hw, RDTR, adapter->rx_int_delay);
-
- /* Setup the Base and Length of the Rx Descriptor Ring */
-
- IXGB_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
- IXGB_WRITE_REG(hw, RDBAH, (rdba >> 32));
-
- IXGB_WRITE_REG(hw, RDLEN, rdlen);
-
- /* Setup the HW Rx Head and Tail Descriptor Pointers */
- IXGB_WRITE_REG(hw, RDH, 0);
- IXGB_WRITE_REG(hw, RDT, 0);
-
- /* due to the hardware errata with RXDCTL, we are unable to use any of
- * the performance enhancing features of it without causing other
- * subtle bugs, some of the bugs could include receive length
- * corruption at high data rates (WTHRESH > 0) and/or receive
- * descriptor ring irregularites (particularly in hardware cache) */
- IXGB_WRITE_REG(hw, RXDCTL, 0);
-
- /* Enable Receive Checksum Offload for TCP and UDP */
- if (adapter->rx_csum) {
- rxcsum = IXGB_READ_REG(hw, RXCSUM);
- rxcsum |= IXGB_RXCSUM_TUOFL;
- IXGB_WRITE_REG(hw, RXCSUM, rxcsum);
- }
-
- /* Enable Receives */
-
- IXGB_WRITE_REG(hw, RCTL, rctl);
-}
-
-/**
- * ixgb_free_tx_resources - Free Tx Resources
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-
-void
-ixgb_free_tx_resources(struct ixgb_adapter *adapter)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- ixgb_clean_tx_ring(adapter);
-
- vfree(adapter->tx_ring.buffer_info);
- adapter->tx_ring.buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, adapter->tx_ring.size,
- adapter->tx_ring.desc, adapter->tx_ring.dma);
-
- adapter->tx_ring.desc = NULL;
-}
-
-static void
-ixgb_unmap_and_free_tx_resource(struct ixgb_adapter *adapter,
- struct ixgb_buffer *buffer_info)
-{
- if (buffer_info->dma) {
- if (buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev, buffer_info->dma,
- buffer_info->length, DMA_TO_DEVICE);
- buffer_info->dma = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb_any(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- buffer_info->time_stamp = 0;
- /* these fields must always be initialized in tx
- * buffer_info->length = 0;
- * buffer_info->next_to_watch = 0; */
-}
-
-/**
- * ixgb_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
- **/
-
-static void
-ixgb_clean_tx_ring(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct ixgb_buffer *buffer_info;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
- buffer_info = &tx_ring->buffer_info[i];
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- size = sizeof(struct ixgb_buffer) * tx_ring->count;
- memset(tx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- IXGB_WRITE_REG(&adapter->hw, TDH, 0);
- IXGB_WRITE_REG(&adapter->hw, TDT, 0);
-}
-
-/**
- * ixgb_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-
-void
-ixgb_free_rx_resources(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct pci_dev *pdev = adapter->pdev;
-
- ixgb_clean_rx_ring(adapter);
-
- vfree(rx_ring->buffer_info);
- rx_ring->buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * ixgb_clean_rx_ring - Free Rx Buffers
- * @adapter: board private structure
- **/
-
-static void
-ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct ixgb_buffer *buffer_info;
- struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
- unsigned int i;
-
- /* Free all the Rx ring sk_buffs */
-
- for (i = 0; i < rx_ring->count; i++) {
- buffer_info = &rx_ring->buffer_info[i];
- if (buffer_info->dma) {
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
- buffer_info->length = 0;
- }
-
- if (buffer_info->skb) {
- dev_kfree_skb(buffer_info->skb);
- buffer_info->skb = NULL;
- }
- }
-
- size = sizeof(struct ixgb_buffer) * rx_ring->count;
- memset(rx_ring->buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
-
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- IXGB_WRITE_REG(&adapter->hw, RDH, 0);
- IXGB_WRITE_REG(&adapter->hw, RDT, 0);
-}
-
-/**
- * ixgb_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int
-ixgb_set_mac(struct net_device *netdev, void *p)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
-
- ixgb_rar_set(&adapter->hw, addr->sa_data, 0);
-
- return 0;
-}
-
-/**
- * ixgb_set_multi - Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_multi entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast,
- * promiscuous mode, and all-multi behavior.
- **/
-
-static void
-ixgb_set_multi(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- struct netdev_hw_addr *ha;
- u32 rctl;
- int i;
-
- /* Check for Promiscuous and All Multicast modes */
-
- rctl = IXGB_READ_REG(hw, RCTL);
-
- if (netdev->flags & IFF_PROMISC) {
- rctl |= (IXGB_RCTL_UPE | IXGB_RCTL_MPE);
- /* disable VLAN filtering */
- rctl &= ~IXGB_RCTL_CFIEN;
- rctl &= ~IXGB_RCTL_VFE;
- } else {
- if (netdev->flags & IFF_ALLMULTI) {
- rctl |= IXGB_RCTL_MPE;
- rctl &= ~IXGB_RCTL_UPE;
- } else {
- rctl &= ~(IXGB_RCTL_UPE | IXGB_RCTL_MPE);
- }
- /* enable VLAN filtering */
- rctl |= IXGB_RCTL_VFE;
- rctl &= ~IXGB_RCTL_CFIEN;
- }
-
- if (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES) {
- rctl |= IXGB_RCTL_MPE;
- IXGB_WRITE_REG(hw, RCTL, rctl);
- } else {
- u8 mta[IXGB_MAX_NUM_MULTICAST_ADDRESSES *
- IXGB_ETH_LENGTH_OF_ADDRESS];
-
- IXGB_WRITE_REG(hw, RCTL, rctl);
-
- i = 0;
- netdev_for_each_mc_addr(ha, netdev)
- memcpy(&mta[i++ * IXGB_ETH_LENGTH_OF_ADDRESS],
- ha->addr, IXGB_ETH_LENGTH_OF_ADDRESS);
-
- ixgb_mc_addr_list_update(hw, mta, netdev_mc_count(netdev), 0);
- }
-
- if (netdev->features & NETIF_F_HW_VLAN_RX)
- ixgb_vlan_strip_enable(adapter);
- else
- ixgb_vlan_strip_disable(adapter);
-
-}
-
-/**
- * ixgb_watchdog - Timer Call-back
- * @data: pointer to netdev cast into an unsigned long
- **/
-
-static void
-ixgb_watchdog(unsigned long data)
-{
- struct ixgb_adapter *adapter = (struct ixgb_adapter *)data;
- struct net_device *netdev = adapter->netdev;
- struct ixgb_desc_ring *txdr = &adapter->tx_ring;
-
- ixgb_check_for_link(&adapter->hw);
-
- if (ixgb_check_for_bad_link(&adapter->hw)) {
- /* force the reset path */
- netif_stop_queue(netdev);
- }
-
- if (adapter->hw.link_up) {
- if (!netif_carrier_ok(netdev)) {
- netdev_info(netdev,
- "NIC Link is Up 10 Gbps Full Duplex, Flow Control: %s\n",
- (adapter->hw.fc.type == ixgb_fc_full) ?
- "RX/TX" :
- (adapter->hw.fc.type == ixgb_fc_rx_pause) ?
- "RX" :
- (adapter->hw.fc.type == ixgb_fc_tx_pause) ?
- "TX" : "None");
- adapter->link_speed = 10000;
- adapter->link_duplex = FULL_DUPLEX;
- netif_carrier_on(netdev);
- }
- } else {
- if (netif_carrier_ok(netdev)) {
- adapter->link_speed = 0;
- adapter->link_duplex = 0;
- netdev_info(netdev, "NIC Link is Down\n");
- netif_carrier_off(netdev);
- }
- }
-
- ixgb_update_stats(adapter);
-
- if (!netif_carrier_ok(netdev)) {
- if (IXGB_DESC_UNUSED(txdr) + 1 < txdr->count) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context). */
- schedule_work(&adapter->tx_timeout_task);
- /* return immediately since reset is imminent */
- return;
- }
- }
-
- /* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = true;
-
- /* generate an interrupt to force clean up of any stragglers */
- IXGB_WRITE_REG(&adapter->hw, ICS, IXGB_INT_TXDW);
-
- /* Reset the timer */
- mod_timer(&adapter->watchdog_timer, jiffies + 2 * HZ);
-}
-
-#define IXGB_TX_FLAGS_CSUM 0x00000001
-#define IXGB_TX_FLAGS_VLAN 0x00000002
-#define IXGB_TX_FLAGS_TSO 0x00000004
-
-static int
-ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
-{
- struct ixgb_context_desc *context_desc;
- unsigned int i;
- u8 ipcss, ipcso, tucss, tucso, hdr_len;
- u16 ipcse, tucse, mss;
- int err;
-
- if (likely(skb_is_gso(skb))) {
- struct ixgb_buffer *buffer_info;
- struct iphdr *iph;
-
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err)
- return err;
- }
-
- hdr_len = skb_transport_offset(skb) + tcp_hdrlen(skb);
- mss = skb_shinfo(skb)->gso_size;
- iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP, 0);
- ipcss = skb_network_offset(skb);
- ipcso = (void *)&(iph->check) - (void *)skb->data;
- ipcse = skb_transport_offset(skb) - 1;
- tucss = skb_transport_offset(skb);
- tucso = (void *)&(tcp_hdr(skb)->check) - (void *)skb->data;
- tucse = 0;
-
- i = adapter->tx_ring.next_to_use;
- context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
- buffer_info = &adapter->tx_ring.buffer_info[i];
- WARN_ON(buffer_info->dma != 0);
-
- context_desc->ipcss = ipcss;
- context_desc->ipcso = ipcso;
- context_desc->ipcse = cpu_to_le16(ipcse);
- context_desc->tucss = tucss;
- context_desc->tucso = tucso;
- context_desc->tucse = cpu_to_le16(tucse);
- context_desc->mss = cpu_to_le16(mss);
- context_desc->hdr_len = hdr_len;
- context_desc->status = 0;
- context_desc->cmd_type_len = cpu_to_le32(
- IXGB_CONTEXT_DESC_TYPE
- | IXGB_CONTEXT_DESC_CMD_TSE
- | IXGB_CONTEXT_DESC_CMD_IP
- | IXGB_CONTEXT_DESC_CMD_TCP
- | IXGB_CONTEXT_DESC_CMD_IDE
- | (skb->len - (hdr_len)));
-
-
- if (++i == adapter->tx_ring.count) i = 0;
- adapter->tx_ring.next_to_use = i;
-
- return 1;
- }
-
- return 0;
-}
-
-static bool
-ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb)
-{
- struct ixgb_context_desc *context_desc;
- unsigned int i;
- u8 css, cso;
-
- if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
- struct ixgb_buffer *buffer_info;
- css = skb_checksum_start_offset(skb);
- cso = css + skb->csum_offset;
-
- i = adapter->tx_ring.next_to_use;
- context_desc = IXGB_CONTEXT_DESC(adapter->tx_ring, i);
- buffer_info = &adapter->tx_ring.buffer_info[i];
- WARN_ON(buffer_info->dma != 0);
-
- context_desc->tucss = css;
- context_desc->tucso = cso;
- context_desc->tucse = 0;
- /* zero out any previously existing data in one instruction */
- *(u32 *)&(context_desc->ipcss) = 0;
- context_desc->status = 0;
- context_desc->hdr_len = 0;
- context_desc->mss = 0;
- context_desc->cmd_type_len =
- cpu_to_le32(IXGB_CONTEXT_DESC_TYPE
- | IXGB_TX_DESC_CMD_IDE);
-
- if (++i == adapter->tx_ring.count) i = 0;
- adapter->tx_ring.next_to_use = i;
-
- return true;
- }
-
- return false;
-}
-
-#define IXGB_MAX_TXD_PWR 14
-#define IXGB_MAX_DATA_PER_TXD (1<<IXGB_MAX_TXD_PWR)
-
-static int
-ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb,
- unsigned int first)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_buffer *buffer_info;
- int len = skb_headlen(skb);
- unsigned int offset = 0, size, count = 0, i;
- unsigned int mss = skb_shinfo(skb)->gso_size;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
- unsigned int f;
-
- i = tx_ring->next_to_use;
-
- while (len) {
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_DATA_PER_TXD);
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && !nr_frags && size == len && size > 8))
- size -= 4;
-
- buffer_info->length = size;
- WARN_ON(buffer_info->dma != 0);
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = false;
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = 0;
-
- len -= size;
- offset += size;
- count++;
- if (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = frag->size;
- offset = frag->page_offset;
-
- while (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- buffer_info = &tx_ring->buffer_info[i];
- size = min(len, IXGB_MAX_DATA_PER_TXD);
-
- /* Workaround for premature desc write-backs
- * in TSO mode. Append 4-byte sentinel desc */
- if (unlikely(mss && (f == (nr_frags - 1))
- && size == len && size > 8))
- size -= 4;
-
- buffer_info->length = size;
- buffer_info->time_stamp = jiffies;
- buffer_info->mapped_as_page = true;
- buffer_info->dma =
- dma_map_page(&pdev->dev, frag->page,
- offset, size, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, buffer_info->dma))
- goto dma_error;
- buffer_info->next_to_watch = 0;
-
- len -= size;
- offset += size;
- count++;
- }
- }
- tx_ring->buffer_info[i].skb = skb;
- tx_ring->buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
- buffer_info->dma = 0;
- if (count)
- count--;
-
- while (count--) {
- if (i==0)
- i += tx_ring->count;
- i--;
- buffer_info = &tx_ring->buffer_info[i];
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
- }
-
- return 0;
-}
-
-static void
-ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct ixgb_tx_desc *tx_desc = NULL;
- struct ixgb_buffer *buffer_info;
- u32 cmd_type_len = adapter->tx_cmd_type;
- u8 status = 0;
- u8 popts = 0;
- unsigned int i;
-
- if (tx_flags & IXGB_TX_FLAGS_TSO) {
- cmd_type_len |= IXGB_TX_DESC_CMD_TSE;
- popts |= (IXGB_TX_DESC_POPTS_IXSM | IXGB_TX_DESC_POPTS_TXSM);
- }
-
- if (tx_flags & IXGB_TX_FLAGS_CSUM)
- popts |= IXGB_TX_DESC_POPTS_TXSM;
-
- if (tx_flags & IXGB_TX_FLAGS_VLAN)
- cmd_type_len |= IXGB_TX_DESC_CMD_VLE;
-
- i = tx_ring->next_to_use;
-
- while (count--) {
- buffer_info = &tx_ring->buffer_info[i];
- tx_desc = IXGB_TX_DESC(*tx_ring, i);
- tx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
- tx_desc->cmd_type_len =
- cpu_to_le32(cmd_type_len | buffer_info->length);
- tx_desc->status = status;
- tx_desc->popts = popts;
- tx_desc->vlan = cpu_to_le16(vlan_id);
-
- if (++i == tx_ring->count) i = 0;
- }
-
- tx_desc->cmd_type_len |=
- cpu_to_le32(IXGB_TX_DESC_CMD_EOP | IXGB_TX_DESC_CMD_RS);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64). */
- wmb();
-
- tx_ring->next_to_use = i;
- IXGB_WRITE_REG(&adapter->hw, TDT, i);
-}
-
-static int __ixgb_maybe_stop_tx(struct net_device *netdev, int size)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
-
- netif_stop_queue(netdev);
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (likely(IXGB_DESC_UNUSED(tx_ring) < size))
- return -EBUSY;
-
- /* A reprieve! */
- netif_start_queue(netdev);
- ++adapter->restart_queue;
- return 0;
-}
-
-static int ixgb_maybe_stop_tx(struct net_device *netdev,
- struct ixgb_desc_ring *tx_ring, int size)
-{
- if (likely(IXGB_DESC_UNUSED(tx_ring) >= size))
- return 0;
- return __ixgb_maybe_stop_tx(netdev, size);
-}
-
-
-/* Tx Descriptors needed, worst case */
-#define TXD_USE_COUNT(S) (((S) >> IXGB_MAX_TXD_PWR) + \
- (((S) & (IXGB_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
-#define DESC_NEEDED TXD_USE_COUNT(IXGB_MAX_DATA_PER_TXD) /* skb->date */ + \
- MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1 /* for context */ \
- + 1 /* one more needed for sentinel TSO workaround */
-
-static netdev_tx_t
-ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- unsigned int first;
- unsigned int tx_flags = 0;
- int vlan_id = 0;
- int count = 0;
- int tso;
-
- if (test_bit(__IXGB_DOWN, &adapter->flags)) {
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- if (skb->len <= 0) {
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- if (unlikely(ixgb_maybe_stop_tx(netdev, &adapter->tx_ring,
- DESC_NEEDED)))
- return NETDEV_TX_BUSY;
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= IXGB_TX_FLAGS_VLAN;
- vlan_id = vlan_tx_tag_get(skb);
- }
-
- first = adapter->tx_ring.next_to_use;
-
- tso = ixgb_tso(adapter, skb);
- if (tso < 0) {
- dev_kfree_skb(skb);
- return NETDEV_TX_OK;
- }
-
- if (likely(tso))
- tx_flags |= IXGB_TX_FLAGS_TSO;
- else if (ixgb_tx_csum(adapter, skb))
- tx_flags |= IXGB_TX_FLAGS_CSUM;
-
- count = ixgb_tx_map(adapter, skb, first);
-
- if (count) {
- ixgb_tx_queue(adapter, count, vlan_id, tx_flags);
- /* Make sure there is space in the ring for the next send. */
- ixgb_maybe_stop_tx(netdev, &adapter->tx_ring, DESC_NEEDED);
-
- } else {
- dev_kfree_skb_any(skb);
- adapter->tx_ring.buffer_info[first].time_stamp = 0;
- adapter->tx_ring.next_to_use = first;
- }
-
- return NETDEV_TX_OK;
-}
-
-/**
- * ixgb_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-
-static void
-ixgb_tx_timeout(struct net_device *netdev)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- schedule_work(&adapter->tx_timeout_task);
-}
-
-static void
-ixgb_tx_timeout_task(struct work_struct *work)
-{
- struct ixgb_adapter *adapter =
- container_of(work, struct ixgb_adapter, tx_timeout_task);
-
- adapter->tx_timeout_count++;
- ixgb_down(adapter, true);
- ixgb_up(adapter);
-}
-
-/**
- * ixgb_get_stats - Get System Network Statistics
- * @netdev: network interface device structure
- *
- * Returns the address of the device statistics structure.
- * The statistics are actually updated from the timer callback.
- **/
-
-static struct net_device_stats *
-ixgb_get_stats(struct net_device *netdev)
-{
- return &netdev->stats;
-}
-
-/**
- * ixgb_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-
-static int
-ixgb_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
- int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
-
- /* MTU < 68 is an error for IPv4 traffic, just don't allow it */
- if ((new_mtu < 68) ||
- (max_frame > IXGB_MAX_JUMBO_FRAME_SIZE + ENET_FCS_LENGTH)) {
- netif_err(adapter, probe, adapter->netdev,
- "Invalid MTU setting %d\n", new_mtu);
- return -EINVAL;
- }
-
- if (old_max_frame == max_frame)
- return 0;
-
- if (netif_running(netdev))
- ixgb_down(adapter, true);
-
- adapter->rx_buffer_len = max_frame + 8; /* + 8 for errata */
-
- netdev->mtu = new_mtu;
-
- if (netif_running(netdev))
- ixgb_up(adapter);
-
- return 0;
-}
-
-/**
- * ixgb_update_stats - Update the board statistics counters.
- * @adapter: board private structure
- **/
-
-void
-ixgb_update_stats(struct ixgb_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* Prevent stats update while adapter is being reset */
- if (pci_channel_offline(pdev))
- return;
-
- if ((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
- (netdev_mc_count(netdev) > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) {
- u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL);
- u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL);
- u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH);
- u64 bcast = ((u64)bcast_h << 32) | bcast_l;
-
- multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
- /* fix up multicast stats by removing broadcasts */
- if (multi >= bcast)
- multi -= bcast;
-
- adapter->stats.mprcl += (multi & 0xFFFFFFFF);
- adapter->stats.mprch += (multi >> 32);
- adapter->stats.bprcl += bcast_l;
- adapter->stats.bprch += bcast_h;
- } else {
- adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL);
- adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH);
- adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL);
- adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH);
- }
- adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL);
- adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH);
- adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL);
- adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH);
- adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL);
- adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH);
- adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL);
- adapter->stats.vprch += IXGB_READ_REG(&adapter->hw, VPRCH);
- adapter->stats.jprcl += IXGB_READ_REG(&adapter->hw, JPRCL);
- adapter->stats.jprch += IXGB_READ_REG(&adapter->hw, JPRCH);
- adapter->stats.gorcl += IXGB_READ_REG(&adapter->hw, GORCL);
- adapter->stats.gorch += IXGB_READ_REG(&adapter->hw, GORCH);
- adapter->stats.torl += IXGB_READ_REG(&adapter->hw, TORL);
- adapter->stats.torh += IXGB_READ_REG(&adapter->hw, TORH);
- adapter->stats.rnbc += IXGB_READ_REG(&adapter->hw, RNBC);
- adapter->stats.ruc += IXGB_READ_REG(&adapter->hw, RUC);
- adapter->stats.roc += IXGB_READ_REG(&adapter->hw, ROC);
- adapter->stats.rlec += IXGB_READ_REG(&adapter->hw, RLEC);
- adapter->stats.crcerrs += IXGB_READ_REG(&adapter->hw, CRCERRS);
- adapter->stats.icbc += IXGB_READ_REG(&adapter->hw, ICBC);
- adapter->stats.ecbc += IXGB_READ_REG(&adapter->hw, ECBC);
- adapter->stats.mpc += IXGB_READ_REG(&adapter->hw, MPC);
- adapter->stats.tptl += IXGB_READ_REG(&adapter->hw, TPTL);
- adapter->stats.tpth += IXGB_READ_REG(&adapter->hw, TPTH);
- adapter->stats.gptcl += IXGB_READ_REG(&adapter->hw, GPTCL);
- adapter->stats.gptch += IXGB_READ_REG(&adapter->hw, GPTCH);
- adapter->stats.bptcl += IXGB_READ_REG(&adapter->hw, BPTCL);
- adapter->stats.bptch += IXGB_READ_REG(&adapter->hw, BPTCH);
- adapter->stats.mptcl += IXGB_READ_REG(&adapter->hw, MPTCL);
- adapter->stats.mptch += IXGB_READ_REG(&adapter->hw, MPTCH);
- adapter->stats.uptcl += IXGB_READ_REG(&adapter->hw, UPTCL);
- adapter->stats.uptch += IXGB_READ_REG(&adapter->hw, UPTCH);
- adapter->stats.vptcl += IXGB_READ_REG(&adapter->hw, VPTCL);
- adapter->stats.vptch += IXGB_READ_REG(&adapter->hw, VPTCH);
- adapter->stats.jptcl += IXGB_READ_REG(&adapter->hw, JPTCL);
- adapter->stats.jptch += IXGB_READ_REG(&adapter->hw, JPTCH);
- adapter->stats.gotcl += IXGB_READ_REG(&adapter->hw, GOTCL);
- adapter->stats.gotch += IXGB_READ_REG(&adapter->hw, GOTCH);
- adapter->stats.totl += IXGB_READ_REG(&adapter->hw, TOTL);
- adapter->stats.toth += IXGB_READ_REG(&adapter->hw, TOTH);
- adapter->stats.dc += IXGB_READ_REG(&adapter->hw, DC);
- adapter->stats.plt64c += IXGB_READ_REG(&adapter->hw, PLT64C);
- adapter->stats.tsctc += IXGB_READ_REG(&adapter->hw, TSCTC);
- adapter->stats.tsctfc += IXGB_READ_REG(&adapter->hw, TSCTFC);
- adapter->stats.ibic += IXGB_READ_REG(&adapter->hw, IBIC);
- adapter->stats.rfc += IXGB_READ_REG(&adapter->hw, RFC);
- adapter->stats.lfc += IXGB_READ_REG(&adapter->hw, LFC);
- adapter->stats.pfrc += IXGB_READ_REG(&adapter->hw, PFRC);
- adapter->stats.pftc += IXGB_READ_REG(&adapter->hw, PFTC);
- adapter->stats.mcfrc += IXGB_READ_REG(&adapter->hw, MCFRC);
- adapter->stats.mcftc += IXGB_READ_REG(&adapter->hw, MCFTC);
- adapter->stats.xonrxc += IXGB_READ_REG(&adapter->hw, XONRXC);
- adapter->stats.xontxc += IXGB_READ_REG(&adapter->hw, XONTXC);
- adapter->stats.xoffrxc += IXGB_READ_REG(&adapter->hw, XOFFRXC);
- adapter->stats.xofftxc += IXGB_READ_REG(&adapter->hw, XOFFTXC);
- adapter->stats.rjc += IXGB_READ_REG(&adapter->hw, RJC);
-
- /* Fill out the OS statistics structure */
-
- netdev->stats.rx_packets = adapter->stats.gprcl;
- netdev->stats.tx_packets = adapter->stats.gptcl;
- netdev->stats.rx_bytes = adapter->stats.gorcl;
- netdev->stats.tx_bytes = adapter->stats.gotcl;
- netdev->stats.multicast = adapter->stats.mprcl;
- netdev->stats.collisions = 0;
-
- /* ignore RLEC as it reports errors for padded (<64bytes) frames
- * with a length in the type/len field */
- netdev->stats.rx_errors =
- /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
- adapter->stats.ruc +
- adapter->stats.roc /*+ adapter->stats.rlec */ +
- adapter->stats.icbc +
- adapter->stats.ecbc + adapter->stats.mpc;
-
- /* see above
- * netdev->stats.rx_length_errors = adapter->stats.rlec;
- */
-
- netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
- netdev->stats.rx_fifo_errors = adapter->stats.mpc;
- netdev->stats.rx_missed_errors = adapter->stats.mpc;
- netdev->stats.rx_over_errors = adapter->stats.mpc;
-
- netdev->stats.tx_errors = 0;
- netdev->stats.rx_frame_errors = 0;
- netdev->stats.tx_aborted_errors = 0;
- netdev->stats.tx_carrier_errors = 0;
- netdev->stats.tx_fifo_errors = 0;
- netdev->stats.tx_heartbeat_errors = 0;
- netdev->stats.tx_window_errors = 0;
-}
-
-#define IXGB_MAX_INTR 10
-/**
- * ixgb_intr - Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-
-static irqreturn_t
-ixgb_intr(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- struct ixgb_hw *hw = &adapter->hw;
- u32 icr = IXGB_READ_REG(hw, ICR);
-
- if (unlikely(!icr))
- return IRQ_NONE; /* Not our interrupt */
-
- if (unlikely(icr & (IXGB_INT_RXSEQ | IXGB_INT_LSC)))
- if (!test_bit(__IXGB_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer, jiffies);
-
- if (napi_schedule_prep(&adapter->napi)) {
-
- /* Disable interrupts and register for poll. The flush
- of the posted write is intentionally left out.
- */
-
- IXGB_WRITE_REG(&adapter->hw, IMC, ~0);
- __napi_schedule(&adapter->napi);
- }
- return IRQ_HANDLED;
-}
-
-/**
- * ixgb_clean - NAPI Rx polling callback
- * @adapter: board private structure
- **/
-
-static int
-ixgb_clean(struct napi_struct *napi, int budget)
-{
- struct ixgb_adapter *adapter = container_of(napi, struct ixgb_adapter, napi);
- int work_done = 0;
-
- ixgb_clean_tx_irq(adapter);
- ixgb_clean_rx_irq(adapter, &work_done, budget);
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (!test_bit(__IXGB_DOWN, &adapter->flags))
- ixgb_irq_enable(adapter);
- }
-
- return work_done;
-}
-
-/**
- * ixgb_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- **/
-
-static bool
-ixgb_clean_tx_irq(struct ixgb_adapter *adapter)
-{
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
- struct net_device *netdev = adapter->netdev;
- struct ixgb_tx_desc *tx_desc, *eop_desc;
- struct ixgb_buffer *buffer_info;
- unsigned int i, eop;
- bool cleaned = false;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IXGB_TX_DESC(*tx_ring, eop);
-
- while (eop_desc->status & IXGB_TX_DESC_STATUS_DD) {
-
- rmb(); /* read buffer_info after eop_desc */
- for (cleaned = false; !cleaned; ) {
- tx_desc = IXGB_TX_DESC(*tx_ring, i);
- buffer_info = &tx_ring->buffer_info[i];
-
- if (tx_desc->popts &
- (IXGB_TX_DESC_POPTS_TXSM |
- IXGB_TX_DESC_POPTS_IXSM))
- adapter->hw_csum_tx_good++;
-
- ixgb_unmap_and_free_tx_resource(adapter, buffer_info);
-
- *(u32 *)&(tx_desc->status) = 0;
-
- cleaned = (i == eop);
- if (++i == tx_ring->count) i = 0;
- }
-
- eop = tx_ring->buffer_info[i].next_to_watch;
- eop_desc = IXGB_TX_DESC(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
- if (unlikely(cleaned && netif_carrier_ok(netdev) &&
- IXGB_DESC_UNUSED(tx_ring) >= DESC_NEEDED)) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean. */
- smp_mb();
-
- if (netif_queue_stopped(netdev) &&
- !(test_bit(__IXGB_DOWN, &adapter->flags))) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
- }
-
- if (adapter->detect_tx_hung) {
- /* detect a transmit hang in hardware, this serializes the
- * check with the clearing of time_stamp and movement of i */
- adapter->detect_tx_hung = false;
- if (tx_ring->buffer_info[eop].time_stamp &&
- time_after(jiffies, tx_ring->buffer_info[eop].time_stamp + HZ)
- && !(IXGB_READ_REG(&adapter->hw, STATUS) &
- IXGB_STATUS_TXOFF)) {
- /* detected Tx unit hang */
- netif_err(adapter, drv, adapter->netdev,
- "Detected Tx Unit Hang\n"
- " TDH <%x>\n"
- " TDT <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " next_to_watch <%x>\n"
- " jiffies <%lx>\n"
- " next_to_watch.status <%x>\n",
- IXGB_READ_REG(&adapter->hw, TDH),
- IXGB_READ_REG(&adapter->hw, TDT),
- tx_ring->next_to_use,
- tx_ring->next_to_clean,
- tx_ring->buffer_info[eop].time_stamp,
- eop,
- jiffies,
- eop_desc->status);
- netif_stop_queue(netdev);
- }
- }
-
- return cleaned;
-}
-
-/**
- * ixgb_rx_checksum - Receive Checksum Offload for 82597.
- * @adapter: board private structure
- * @rx_desc: receive descriptor
- * @sk_buff: socket buffer with received data
- **/
-
-static void
-ixgb_rx_checksum(struct ixgb_adapter *adapter,
- struct ixgb_rx_desc *rx_desc,
- struct sk_buff *skb)
-{
- /* Ignore Checksum bit is set OR
- * TCP Checksum has not been calculated
- */
- if ((rx_desc->status & IXGB_RX_DESC_STATUS_IXSM) ||
- (!(rx_desc->status & IXGB_RX_DESC_STATUS_TCPCS))) {
- skb_checksum_none_assert(skb);
- return;
- }
-
- /* At this point we know the hardware did the TCP checksum */
- /* now look at the TCP checksum error bit */
- if (rx_desc->errors & IXGB_RX_DESC_ERRORS_TCPE) {
- /* let the stack verify checksum errors */
- skb_checksum_none_assert(skb);
- adapter->hw_csum_rx_error++;
- } else {
- /* TCP checksum is good */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- adapter->hw_csum_rx_good++;
- }
-}
-
-/*
- * this should improve performance for small packets with large amounts
- * of reassembly being done in the stack
- */
-static void ixgb_check_copybreak(struct net_device *netdev,
- struct ixgb_buffer *buffer_info,
- u32 length, struct sk_buff **skb)
-{
- struct sk_buff *new_skb;
-
- if (length > copybreak)
- return;
-
- new_skb = netdev_alloc_skb_ip_align(netdev, length);
- if (!new_skb)
- return;
-
- skb_copy_to_linear_data_offset(new_skb, -NET_IP_ALIGN,
- (*skb)->data - NET_IP_ALIGN,
- length + NET_IP_ALIGN);
- /* save the skb in buffer_info as good */
- buffer_info->skb = *skb;
- *skb = new_skb;
-}
-
-/**
- * ixgb_clean_rx_irq - Send received data up the network stack,
- * @adapter: board private structure
- **/
-
-static bool
-ixgb_clean_rx_irq(struct ixgb_adapter *adapter, int *work_done, int work_to_do)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_rx_desc *rx_desc, *next_rxd;
- struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer;
- u32 length;
- unsigned int i, j;
- int cleaned_count = 0;
- bool cleaned = false;
-
- i = rx_ring->next_to_clean;
- rx_desc = IXGB_RX_DESC(*rx_ring, i);
- buffer_info = &rx_ring->buffer_info[i];
-
- while (rx_desc->status & IXGB_RX_DESC_STATUS_DD) {
- struct sk_buff *skb;
- u8 status;
-
- if (*work_done >= work_to_do)
- break;
-
- (*work_done)++;
- rmb(); /* read descriptor and rx_buffer_info after status DD */
- status = rx_desc->status;
- skb = buffer_info->skb;
- buffer_info->skb = NULL;
-
- prefetch(skb->data - NET_IP_ALIGN);
-
- if (++i == rx_ring->count)
- i = 0;
- next_rxd = IXGB_RX_DESC(*rx_ring, i);
- prefetch(next_rxd);
-
- j = i + 1;
- if (j == rx_ring->count)
- j = 0;
- next2_buffer = &rx_ring->buffer_info[j];
- prefetch(next2_buffer);
-
- next_buffer = &rx_ring->buffer_info[i];
-
- cleaned = true;
- cleaned_count++;
-
- dma_unmap_single(&pdev->dev,
- buffer_info->dma,
- buffer_info->length,
- DMA_FROM_DEVICE);
- buffer_info->dma = 0;
-
- length = le16_to_cpu(rx_desc->length);
- rx_desc->length = 0;
-
- if (unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) {
-
- /* All receives must fit into a single buffer */
-
- IXGB_DBG("Receive packet consumed multiple buffers "
- "length<%x>\n", length);
-
- dev_kfree_skb_irq(skb);
- goto rxdesc_done;
- }
-
- if (unlikely(rx_desc->errors &
- (IXGB_RX_DESC_ERRORS_CE | IXGB_RX_DESC_ERRORS_SE |
- IXGB_RX_DESC_ERRORS_P | IXGB_RX_DESC_ERRORS_RXE))) {
- dev_kfree_skb_irq(skb);
- goto rxdesc_done;
- }
-
- ixgb_check_copybreak(netdev, buffer_info, length, &skb);
-
- /* Good Receive */
- skb_put(skb, length);
-
- /* Receive Checksum Offload */
- ixgb_rx_checksum(adapter, rx_desc, skb);
-
- skb->protocol = eth_type_trans(skb, netdev);
- if (status & IXGB_RX_DESC_STATUS_VP)
- __vlan_hwaccel_put_tag(skb,
- le16_to_cpu(rx_desc->special));
-
- netif_receive_skb(skb);
-
-rxdesc_done:
- /* clean up descriptor, might be written over by hw */
- rx_desc->status = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (unlikely(cleaned_count >= IXGB_RX_BUFFER_WRITE)) {
- ixgb_alloc_rx_buffers(adapter, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- buffer_info = next_buffer;
- }
-
- rx_ring->next_to_clean = i;
-
- cleaned_count = IXGB_DESC_UNUSED(rx_ring);
- if (cleaned_count)
- ixgb_alloc_rx_buffers(adapter, cleaned_count);
-
- return cleaned;
-}
-
-/**
- * ixgb_alloc_rx_buffers - Replace used receive buffers
- * @adapter: address of board private structure
- **/
-
-static void
-ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter, int cleaned_count)
-{
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
- struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
- struct ixgb_rx_desc *rx_desc;
- struct ixgb_buffer *buffer_info;
- struct sk_buff *skb;
- unsigned int i;
- long cleancount;
-
- i = rx_ring->next_to_use;
- buffer_info = &rx_ring->buffer_info[i];
- cleancount = IXGB_DESC_UNUSED(rx_ring);
-
-
- /* leave three descriptors unused */
- while (--cleancount > 2 && cleaned_count--) {
- /* recycle! its good for you */
- skb = buffer_info->skb;
- if (skb) {
- skb_trim(skb, 0);
- goto map_skb;
- }
-
- skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
- if (unlikely(!skb)) {
- /* Better luck next round */
- adapter->alloc_rx_buff_failed++;
- break;
- }
-
- buffer_info->skb = skb;
- buffer_info->length = adapter->rx_buffer_len;
-map_skb:
- buffer_info->dma = dma_map_single(&pdev->dev,
- skb->data,
- adapter->rx_buffer_len,
- DMA_FROM_DEVICE);
-
- rx_desc = IXGB_RX_DESC(*rx_ring, i);
- rx_desc->buff_addr = cpu_to_le64(buffer_info->dma);
- /* guarantee DD bit not set now before h/w gets descriptor
- * this is the rest of the workaround for h/w double
- * writeback. */
- rx_desc->status = 0;
-
-
- if (++i == rx_ring->count) i = 0;
- buffer_info = &rx_ring->buffer_info[i];
- }
-
- if (likely(rx_ring->next_to_use != i)) {
- rx_ring->next_to_use = i;
- if (unlikely(i-- == 0))
- i = (rx_ring->count - 1);
-
- /* Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs, such
- * as IA-64). */
- wmb();
- IXGB_WRITE_REG(&adapter->hw, RDT, i);
- }
-}
-
-static void
-ixgb_vlan_strip_enable(struct ixgb_adapter *adapter)
-{
- u32 ctrl;
-
- /* enable VLAN tag insert/strip */
- ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
- ctrl |= IXGB_CTRL0_VME;
- IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-}
-
-static void
-ixgb_vlan_strip_disable(struct ixgb_adapter *adapter)
-{
- u32 ctrl;
-
- /* disable VLAN tag insert/strip */
- ctrl = IXGB_READ_REG(&adapter->hw, CTRL0);
- ctrl &= ~IXGB_CTRL0_VME;
- IXGB_WRITE_REG(&adapter->hw, CTRL0, ctrl);
-}
-
-static void
-ixgb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 vfta, index;
-
- /* add VID to filter table */
-
- index = (vid >> 5) & 0x7F;
- vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- vfta |= (1 << (vid & 0x1F));
- ixgb_write_vfta(&adapter->hw, index, vfta);
- set_bit(vid, adapter->active_vlans);
-}
-
-static void
-ixgb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgb_adapter *adapter = netdev_priv(netdev);
- u32 vfta, index;
-
- /* remove VID from filter table */
-
- index = (vid >> 5) & 0x7F;
- vfta = IXGB_READ_REG_ARRAY(&adapter->hw, VFTA, index);
- vfta &= ~(1 << (vid & 0x1F));
- ixgb_write_vfta(&adapter->hw, index, vfta);
- clear_bit(vid, adapter->active_vlans);
-}
-
-static void
-ixgb_restore_vlan(struct ixgb_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- ixgb_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-
-static void ixgb_netpoll(struct net_device *dev)
-{
- struct ixgb_adapter *adapter = netdev_priv(dev);
-
- disable_irq(adapter->pdev->irq);
- ixgb_intr(adapter->pdev->irq, dev);
- enable_irq(adapter->pdev->irq);
-}
-#endif
-
-/**
- * ixgb_io_error_detected() - called when PCI error is detected
- * @pdev pointer to pci device with error
- * @state pci channel state after error
- *
- * This callback is called by the PCI subsystem whenever
- * a PCI bus error is detected.
- */
-static pci_ers_result_t ixgb_io_error_detected(struct pci_dev *pdev,
- enum pci_channel_state state)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- ixgb_down(adapter, true);
-
- pci_disable_device(pdev);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * ixgb_io_slot_reset - called after the pci bus has been reset.
- * @pdev pointer to pci device with error
- *
- * This callback is called after the PCI bus has been reset.
- * Basically, this tries to restart the card from scratch.
- * This is a shortened version of the device probe/discovery code,
- * it resembles the first-half of the ixgb_probe() routine.
- */
-static pci_ers_result_t ixgb_io_slot_reset(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- if (pci_enable_device(pdev)) {
- netif_err(adapter, probe, adapter->netdev,
- "Cannot re-enable PCI device after reset\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- /* Perform card reset only on one instance of the card */
- if (0 != PCI_FUNC (pdev->devfn))
- return PCI_ERS_RESULT_RECOVERED;
-
- pci_set_master(pdev);
-
- netif_carrier_off(netdev);
- netif_stop_queue(netdev);
- ixgb_reset(adapter);
-
- /* Make sure the EEPROM is good */
- if (!ixgb_validate_eeprom_checksum(&adapter->hw)) {
- netif_err(adapter, probe, adapter->netdev,
- "After reset, the EEPROM checksum is not valid\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
- ixgb_get_ee_mac_addr(&adapter->hw, netdev->dev_addr);
- memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->perm_addr)) {
- netif_err(adapter, probe, adapter->netdev,
- "After reset, invalid MAC address\n");
- return PCI_ERS_RESULT_DISCONNECT;
- }
-
- return PCI_ERS_RESULT_RECOVERED;
-}
-
-/**
- * ixgb_io_resume - called when its OK to resume normal operations
- * @pdev pointer to pci device with error
- *
- * The error recovery driver tells us that its OK to resume
- * normal operation. Implementation resembles the second-half
- * of the ixgb_probe() routine.
- */
-static void ixgb_io_resume(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgb_adapter *adapter = netdev_priv(netdev);
-
- pci_set_master(pdev);
-
- if (netif_running(netdev)) {
- if (ixgb_up(adapter)) {
- pr_err("can't bring device back up after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
- mod_timer(&adapter->watchdog_timer, jiffies);
-}
-
-/* ixgb_main.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* glue for the OS independent part of ixgb
- * includes register access macros
- */
-
-#ifndef _IXGB_OSDEP_H_
-#define _IXGB_OSDEP_H_
-
-#include <linux/types.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-#include <linux/interrupt.h>
-#include <linux/sched.h>
-
-#undef ASSERT
-#define ASSERT(x) BUG_ON(!(x))
-
-#define ENTER() pr_debug("%s\n", __func__);
-
-#define IXGB_WRITE_REG(a, reg, value) ( \
- writel((value), ((a)->hw_addr + IXGB_##reg)))
-
-#define IXGB_READ_REG(a, reg) ( \
- readl((a)->hw_addr + IXGB_##reg))
-
-#define IXGB_WRITE_REG_ARRAY(a, reg, offset, value) ( \
- writel((value), ((a)->hw_addr + IXGB_##reg + ((offset) << 2))))
-
-#define IXGB_READ_REG_ARRAY(a, reg, offset) ( \
- readl((a)->hw_addr + IXGB_##reg + ((offset) << 2)))
-
-#define IXGB_WRITE_FLUSH(a) IXGB_READ_REG(a, STATUS)
-
-#define IXGB_MEMCPY memcpy
-
-#endif /* _IXGB_OSDEP_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel PRO/10GbE Linux driver
- Copyright(c) 1999 - 2008 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include "ixgb.h"
-
-/* This is the only thing that needs to be changed to adjust the
- * maximum number of ports that the driver can manage.
- */
-
-#define IXGB_MAX_NIC 8
-
-#define OPTION_UNSET -1
-#define OPTION_DISABLED 0
-#define OPTION_ENABLED 1
-
-/* All parameters are treated the same, as an integer array of values.
- * This macro just reduces the need to repeat the same declaration code
- * over and over (plus this helps to avoid typo bugs).
- */
-
-#define IXGB_PARAM_INIT { [0 ... IXGB_MAX_NIC] = OPTION_UNSET }
-#define IXGB_PARAM(X, desc) \
- static int __devinitdata X[IXGB_MAX_NIC+1] \
- = IXGB_PARAM_INIT; \
- static unsigned int num_##X = 0; \
- module_param_array_named(X, X, int, &num_##X, 0); \
- MODULE_PARM_DESC(X, desc);
-
-/* Transmit Descriptor Count
- *
- * Valid Range: 64-4096
- *
- * Default Value: 256
- */
-
-IXGB_PARAM(TxDescriptors, "Number of transmit descriptors");
-
-/* Receive Descriptor Count
- *
- * Valid Range: 64-4096
- *
- * Default Value: 1024
- */
-
-IXGB_PARAM(RxDescriptors, "Number of receive descriptors");
-
-/* User Specified Flow Control Override
- *
- * Valid Range: 0-3
- * - 0 - No Flow Control
- * - 1 - Rx only, respond to PAUSE frames but do not generate them
- * - 2 - Tx only, generate PAUSE frames but ignore them on receive
- * - 3 - Full Flow Control Support
- *
- * Default Value: 2 - Tx only (silicon bug avoidance)
- */
-
-IXGB_PARAM(FlowControl, "Flow Control setting");
-
-/* XsumRX - Receive Checksum Offload Enable/Disable
- *
- * Valid Range: 0, 1
- * - 0 - disables all checksum offload
- * - 1 - enables receive IP/TCP/UDP checksum offload
- * on 82597 based NICs
- *
- * Default Value: 1
- */
-
-IXGB_PARAM(XsumRX, "Disable or enable Receive Checksum offload");
-
-/* Transmit Interrupt Delay in units of 0.8192 microseconds
- *
- * Valid Range: 0-65535
- *
- * Default Value: 32
- */
-
-IXGB_PARAM(TxIntDelay, "Transmit Interrupt Delay");
-
-/* Receive Interrupt Delay in units of 0.8192 microseconds
- *
- * Valid Range: 0-65535
- *
- * Default Value: 72
- */
-
-IXGB_PARAM(RxIntDelay, "Receive Interrupt Delay");
-
-/* Receive Flow control high threshold (when we send a pause frame)
- * (FCRTH)
- *
- * Valid Range: 1,536 - 262,136 (0x600 - 0x3FFF8, 8 byte granularity)
- *
- * Default Value: 196,608 (0x30000)
- */
-
-IXGB_PARAM(RxFCHighThresh, "Receive Flow Control High Threshold");
-
-/* Receive Flow control low threshold (when we send a resume frame)
- * (FCRTL)
- *
- * Valid Range: 64 - 262,136 (0x40 - 0x3FFF8, 8 byte granularity)
- * must be less than high threshold by at least 8 bytes
- *
- * Default Value: 163,840 (0x28000)
- */
-
-IXGB_PARAM(RxFCLowThresh, "Receive Flow Control Low Threshold");
-
-/* Flow control request timeout (how long to pause the link partner's tx)
- * (PAP 15:0)
- *
- * Valid Range: 1 - 65535
- *
- * Default Value: 65535 (0xffff) (we'll send an xon if we recover)
- */
-
-IXGB_PARAM(FCReqTimeout, "Flow Control Request Timeout");
-
-/* Interrupt Delay Enable
- *
- * Valid Range: 0, 1
- *
- * - 0 - disables transmit interrupt delay
- * - 1 - enables transmmit interrupt delay
- *
- * Default Value: 1
- */
-
-IXGB_PARAM(IntDelayEnable, "Transmit Interrupt Delay Enable");
-
-
-#define DEFAULT_TIDV 32
-#define MAX_TIDV 0xFFFF
-#define MIN_TIDV 0
-
-#define DEFAULT_RDTR 72
-#define MAX_RDTR 0xFFFF
-#define MIN_RDTR 0
-
-#define XSUMRX_DEFAULT OPTION_ENABLED
-
-#define DEFAULT_FCRTL 0x28000
-#define DEFAULT_FCRTH 0x30000
-#define MIN_FCRTL 0
-#define MAX_FCRTL 0x3FFE8
-#define MIN_FCRTH 8
-#define MAX_FCRTH 0x3FFF0
-
-#define MIN_FCPAUSE 1
-#define MAX_FCPAUSE 0xffff
-#define DEFAULT_FCPAUSE 0xFFFF /* this may be too long */
-
-struct ixgb_option {
- enum { enable_option, range_option, list_option } type;
- const char *name;
- const char *err;
- int def;
- union {
- struct { /* range_option info */
- int min;
- int max;
- } r;
- struct { /* list_option info */
- int nr;
- const struct ixgb_opt_list {
- int i;
- const char *str;
- } *p;
- } l;
- } arg;
-};
-
-static int __devinit
-ixgb_validate_option(unsigned int *value, const struct ixgb_option *opt)
-{
- if (*value == OPTION_UNSET) {
- *value = opt->def;
- return 0;
- }
-
- switch (opt->type) {
- case enable_option:
- switch (*value) {
- case OPTION_ENABLED:
- pr_info("%s Enabled\n", opt->name);
- return 0;
- case OPTION_DISABLED:
- pr_info("%s Disabled\n", opt->name);
- return 0;
- }
- break;
- case range_option:
- if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
- pr_info("%s set to %i\n", opt->name, *value);
- return 0;
- }
- break;
- case list_option: {
- int i;
- const struct ixgb_opt_list *ent;
-
- for (i = 0; i < opt->arg.l.nr; i++) {
- ent = &opt->arg.l.p[i];
- if (*value == ent->i) {
- if (ent->str[0] != '\0')
- pr_info("%s\n", ent->str);
- return 0;
- }
- }
- }
- break;
- default:
- BUG();
- }
-
- pr_info("Invalid %s specified (%i) %s\n", opt->name, *value, opt->err);
- *value = opt->def;
- return -1;
-}
-
-/**
- * ixgb_check_options - Range Checking for Command Line Parameters
- * @adapter: board private structure
- *
- * This routine checks all command line parameters for valid user
- * input. If an invalid value is given, or if no user specified
- * value exists, a default value is used. The final value is stored
- * in a variable in the adapter structure.
- **/
-
-void __devinit
-ixgb_check_options(struct ixgb_adapter *adapter)
-{
- int bd = adapter->bd_number;
- if (bd >= IXGB_MAX_NIC) {
- pr_notice("Warning: no configuration for board #%i\n", bd);
- pr_notice("Using defaults for all values\n");
- }
-
- { /* Transmit Descriptor Count */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Transmit Descriptors",
- .err = "using default of " __MODULE_STRING(DEFAULT_TXD),
- .def = DEFAULT_TXD,
- .arg = { .r = { .min = MIN_TXD,
- .max = MAX_TXD}}
- };
- struct ixgb_desc_ring *tx_ring = &adapter->tx_ring;
-
- if (num_TxDescriptors > bd) {
- tx_ring->count = TxDescriptors[bd];
- ixgb_validate_option(&tx_ring->count, &opt);
- } else {
- tx_ring->count = opt.def;
- }
- tx_ring->count = ALIGN(tx_ring->count, IXGB_REQ_TX_DESCRIPTOR_MULTIPLE);
- }
- { /* Receive Descriptor Count */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Receive Descriptors",
- .err = "using default of " __MODULE_STRING(DEFAULT_RXD),
- .def = DEFAULT_RXD,
- .arg = { .r = { .min = MIN_RXD,
- .max = MAX_RXD}}
- };
- struct ixgb_desc_ring *rx_ring = &adapter->rx_ring;
-
- if (num_RxDescriptors > bd) {
- rx_ring->count = RxDescriptors[bd];
- ixgb_validate_option(&rx_ring->count, &opt);
- } else {
- rx_ring->count = opt.def;
- }
- rx_ring->count = ALIGN(rx_ring->count, IXGB_REQ_RX_DESCRIPTOR_MULTIPLE);
- }
- { /* Receive Checksum Offload Enable */
- const struct ixgb_option opt = {
- .type = enable_option,
- .name = "Receive Checksum Offload",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_XsumRX > bd) {
- unsigned int rx_csum = XsumRX[bd];
- ixgb_validate_option(&rx_csum, &opt);
- adapter->rx_csum = rx_csum;
- } else {
- adapter->rx_csum = opt.def;
- }
- }
- { /* Flow Control */
-
- static const struct ixgb_opt_list fc_list[] = {
- { ixgb_fc_none, "Flow Control Disabled" },
- { ixgb_fc_rx_pause, "Flow Control Receive Only" },
- { ixgb_fc_tx_pause, "Flow Control Transmit Only" },
- { ixgb_fc_full, "Flow Control Enabled" },
- { ixgb_fc_default, "Flow Control Hardware Default" }
- };
-
- static const struct ixgb_option opt = {
- .type = list_option,
- .name = "Flow Control",
- .err = "reading default settings from EEPROM",
- .def = ixgb_fc_tx_pause,
- .arg = { .l = { .nr = ARRAY_SIZE(fc_list),
- .p = fc_list }}
- };
-
- if (num_FlowControl > bd) {
- unsigned int fc = FlowControl[bd];
- ixgb_validate_option(&fc, &opt);
- adapter->hw.fc.type = fc;
- } else {
- adapter->hw.fc.type = opt.def;
- }
- }
- { /* Receive Flow Control High Threshold */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Rx Flow Control High Threshold",
- .err = "using default of " __MODULE_STRING(DEFAULT_FCRTH),
- .def = DEFAULT_FCRTH,
- .arg = { .r = { .min = MIN_FCRTH,
- .max = MAX_FCRTH}}
- };
-
- if (num_RxFCHighThresh > bd) {
- adapter->hw.fc.high_water = RxFCHighThresh[bd];
- ixgb_validate_option(&adapter->hw.fc.high_water, &opt);
- } else {
- adapter->hw.fc.high_water = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring RxFCHighThresh when no RxFC\n");
- }
- { /* Receive Flow Control Low Threshold */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Rx Flow Control Low Threshold",
- .err = "using default of " __MODULE_STRING(DEFAULT_FCRTL),
- .def = DEFAULT_FCRTL,
- .arg = { .r = { .min = MIN_FCRTL,
- .max = MAX_FCRTL}}
- };
-
- if (num_RxFCLowThresh > bd) {
- adapter->hw.fc.low_water = RxFCLowThresh[bd];
- ixgb_validate_option(&adapter->hw.fc.low_water, &opt);
- } else {
- adapter->hw.fc.low_water = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring RxFCLowThresh when no RxFC\n");
- }
- { /* Flow Control Pause Time Request*/
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Flow Control Pause Time Request",
- .err = "using default of "__MODULE_STRING(DEFAULT_FCPAUSE),
- .def = DEFAULT_FCPAUSE,
- .arg = { .r = { .min = MIN_FCPAUSE,
- .max = MAX_FCPAUSE}}
- };
-
- if (num_FCReqTimeout > bd) {
- unsigned int pause_time = FCReqTimeout[bd];
- ixgb_validate_option(&pause_time, &opt);
- adapter->hw.fc.pause_time = pause_time;
- } else {
- adapter->hw.fc.pause_time = opt.def;
- }
- if (!(adapter->hw.fc.type & ixgb_fc_tx_pause) )
- pr_info("Ignoring FCReqTimeout when no RxFC\n");
- }
- /* high low and spacing check for rx flow control thresholds */
- if (adapter->hw.fc.type & ixgb_fc_tx_pause) {
- /* high must be greater than low */
- if (adapter->hw.fc.high_water < (adapter->hw.fc.low_water + 8)) {
- /* set defaults */
- pr_info("RxFCHighThresh must be >= (RxFCLowThresh + 8), Using Defaults\n");
- adapter->hw.fc.high_water = DEFAULT_FCRTH;
- adapter->hw.fc.low_water = DEFAULT_FCRTL;
- }
- }
- { /* Receive Interrupt Delay */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Receive Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_RDTR),
- .def = DEFAULT_RDTR,
- .arg = { .r = { .min = MIN_RDTR,
- .max = MAX_RDTR}}
- };
-
- if (num_RxIntDelay > bd) {
- adapter->rx_int_delay = RxIntDelay[bd];
- ixgb_validate_option(&adapter->rx_int_delay, &opt);
- } else {
- adapter->rx_int_delay = opt.def;
- }
- }
- { /* Transmit Interrupt Delay */
- const struct ixgb_option opt = {
- .type = range_option,
- .name = "Transmit Interrupt Delay",
- .err = "using default of " __MODULE_STRING(DEFAULT_TIDV),
- .def = DEFAULT_TIDV,
- .arg = { .r = { .min = MIN_TIDV,
- .max = MAX_TIDV}}
- };
-
- if (num_TxIntDelay > bd) {
- adapter->tx_int_delay = TxIntDelay[bd];
- ixgb_validate_option(&adapter->tx_int_delay, &opt);
- } else {
- adapter->tx_int_delay = opt.def;
- }
- }
-
- { /* Transmit Interrupt Delay Enable */
- const struct ixgb_option opt = {
- .type = enable_option,
- .name = "Tx Interrupt Delay Enable",
- .err = "defaulting to Enabled",
- .def = OPTION_ENABLED
- };
-
- if (num_IntDelayEnable > bd) {
- unsigned int ide = IntDelayEnable[bd];
- ixgb_validate_option(&ide, &opt);
- adapter->tx_int_delay_enable = ide;
- } else {
- adapter->tx_int_delay_enable = opt.def;
- }
- }
-}
+++ /dev/null
-################################################################################
-#
-# Intel 10 Gigabit PCI Express Linux driver
-# Copyright(c) 1999 - 2010 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# Linux NICS <linux.nics@intel.com>
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) 10GbE PCI Express ethernet driver
-#
-
-obj-$(CONFIG_IXGBE) += ixgbe.o
-
-ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \
- ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \
- ixgbe_mbx.o ixgbe_x540.o
-
-ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \
- ixgbe_dcb_82599.o ixgbe_dcb_nl.o
-
-ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_H_
-#define _IXGBE_H_
-
-#include <linux/bitops.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/cpumask.h>
-#include <linux/aer.h>
-#include <linux/if_vlan.h>
-
-#include "ixgbe_type.h"
-#include "ixgbe_common.h"
-#include "ixgbe_dcb.h"
-#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
-#define IXGBE_FCOE
-#include "ixgbe_fcoe.h"
-#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */
-#ifdef CONFIG_IXGBE_DCA
-#include <linux/dca.h>
-#endif
-
-/* common prefix used by pr_<> macros */
-#undef pr_fmt
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-/* TX/RX descriptor defines */
-#define IXGBE_DEFAULT_TXD 512
-#define IXGBE_MAX_TXD 4096
-#define IXGBE_MIN_TXD 64
-
-#define IXGBE_DEFAULT_RXD 512
-#define IXGBE_MAX_RXD 4096
-#define IXGBE_MIN_RXD 64
-
-/* flow control */
-#define IXGBE_MIN_FCRTL 0x40
-#define IXGBE_MAX_FCRTL 0x7FF80
-#define IXGBE_MIN_FCRTH 0x600
-#define IXGBE_MAX_FCRTH 0x7FFF0
-#define IXGBE_DEFAULT_FCPAUSE 0xFFFF
-#define IXGBE_MIN_FCPAUSE 0
-#define IXGBE_MAX_FCPAUSE 0xFFFF
-
-/* Supported Rx Buffer Sizes */
-#define IXGBE_RXBUFFER_512 512 /* Used for packet split */
-#define IXGBE_RXBUFFER_2048 2048
-#define IXGBE_RXBUFFER_4096 4096
-#define IXGBE_RXBUFFER_8192 8192
-#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */
-
-/*
- * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we
- * reserve 2 more, and skb_shared_info adds an additional 384 bytes more,
- * this adds up to 512 bytes of extra data meaning the smallest allocation
- * we could have is 1K.
- * i.e. RXBUFFER_512 --> size-1024 slab
- */
-#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512
-
-#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN)
-
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define IXGBE_TX_FLAGS_CSUM (u32)(1)
-#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1)
-#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2)
-#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3)
-#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 4)
-#define IXGBE_TX_FLAGS_FSO (u32)(1 << 5)
-#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
-#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
-
-#define IXGBE_MAX_RSC_INT_RATE 162760
-
-#define IXGBE_MAX_VF_MC_ENTRIES 30
-#define IXGBE_MAX_VF_FUNCTIONS 64
-#define IXGBE_MAX_VFTA_ENTRIES 128
-#define MAX_EMULATION_MAC_ADDRS 16
-#define IXGBE_MAX_PF_MACVLANS 15
-#define VMDQ_P(p) ((p) + adapter->num_vfs)
-
-struct vf_data_storage {
- unsigned char vf_mac_addresses[ETH_ALEN];
- u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES];
- u16 num_vf_mc_hashes;
- u16 default_vf_vlan_id;
- u16 vlans_enabled;
- bool clear_to_send;
- bool pf_set_mac;
- u16 pf_vlan; /* When set, guest VLAN config not allowed. */
- u16 pf_qos;
- u16 tx_rate;
-};
-
-struct vf_macvlans {
- struct list_head l;
- int vf;
- int rar_entry;
- bool free;
- bool is_macvlan;
- u8 vf_macvlan[ETH_ALEN];
-};
-
-#define IXGBE_MAX_TXD_PWR 14
-#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR)
-
-/* Tx Descriptors needed, worst case */
-#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD)
-#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4)
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct ixgbe_tx_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- unsigned int bytecount;
- u16 gso_segs;
- u8 mapped_as_page;
-};
-
-struct ixgbe_rx_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- struct page *page;
- dma_addr_t page_dma;
- unsigned int page_offset;
-};
-
-struct ixgbe_queue_stats {
- u64 packets;
- u64 bytes;
-};
-
-struct ixgbe_tx_queue_stats {
- u64 restart_queue;
- u64 tx_busy;
- u64 completed;
- u64 tx_done_old;
-};
-
-struct ixgbe_rx_queue_stats {
- u64 rsc_count;
- u64 rsc_flush;
- u64 non_eop_descs;
- u64 alloc_rx_page_failed;
- u64 alloc_rx_buff_failed;
-};
-
-enum ixbge_ring_state_t {
- __IXGBE_TX_FDIR_INIT_DONE,
- __IXGBE_TX_DETECT_HANG,
- __IXGBE_HANG_CHECK_ARMED,
- __IXGBE_RX_PS_ENABLED,
- __IXGBE_RX_RSC_ENABLED,
-};
-
-#define ring_is_ps_enabled(ring) \
- test_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
-#define set_ring_ps_enabled(ring) \
- set_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
-#define clear_ring_ps_enabled(ring) \
- clear_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state)
-#define check_for_tx_hang(ring) \
- test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
-#define set_check_for_tx_hang(ring) \
- set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
-#define clear_check_for_tx_hang(ring) \
- clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state)
-#define ring_is_rsc_enabled(ring) \
- test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
-#define set_ring_rsc_enabled(ring) \
- set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
-#define clear_ring_rsc_enabled(ring) \
- clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state)
-struct ixgbe_ring {
- void *desc; /* descriptor ring memory */
- struct device *dev; /* device for DMA mapping */
- struct net_device *netdev; /* netdev ring belongs to */
- union {
- struct ixgbe_tx_buffer *tx_buffer_info;
- struct ixgbe_rx_buffer *rx_buffer_info;
- };
- unsigned long state;
- u8 __iomem *tail;
-
- u16 count; /* amount of descriptors */
- u16 rx_buf_len;
-
- u8 queue_index; /* needed for multiqueue queue management */
- u8 reg_idx; /* holds the special value that gets
- * the hardware register offset
- * associated with this ring, which is
- * different for DCB and RSS modes
- */
- u8 atr_sample_rate;
- u8 atr_count;
-
- u16 next_to_use;
- u16 next_to_clean;
-
- u8 dcb_tc;
- struct ixgbe_queue_stats stats;
- struct u64_stats_sync syncp;
- union {
- struct ixgbe_tx_queue_stats tx_stats;
- struct ixgbe_rx_queue_stats rx_stats;
- };
- int numa_node;
- unsigned int size; /* length in bytes */
- dma_addr_t dma; /* phys. address of descriptor ring */
- struct rcu_head rcu;
- struct ixgbe_q_vector *q_vector; /* back-pointer to host q_vector */
-} ____cacheline_internodealigned_in_smp;
-
-enum ixgbe_ring_f_enum {
- RING_F_NONE = 0,
- RING_F_VMDQ, /* SR-IOV uses the same ring feature */
- RING_F_RSS,
- RING_F_FDIR,
-#ifdef IXGBE_FCOE
- RING_F_FCOE,
-#endif /* IXGBE_FCOE */
-
- RING_F_ARRAY_SIZE /* must be last in enum set */
-};
-
-#define IXGBE_MAX_RSS_INDICES 16
-#define IXGBE_MAX_VMDQ_INDICES 64
-#define IXGBE_MAX_FDIR_INDICES 64
-#ifdef IXGBE_FCOE
-#define IXGBE_MAX_FCOE_INDICES 8
-#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
-#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES)
-#else
-#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES
-#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES
-#endif /* IXGBE_FCOE */
-struct ixgbe_ring_feature {
- int indices;
- int mask;
-} ____cacheline_internodealigned_in_smp;
-
-struct ixgbe_ring_container {
-#if MAX_RX_QUEUES > MAX_TX_QUEUES
- DECLARE_BITMAP(idx, MAX_RX_QUEUES);
-#else
- DECLARE_BITMAP(idx, MAX_TX_QUEUES);
-#endif
- unsigned int total_bytes; /* total bytes processed this int */
- unsigned int total_packets; /* total packets processed this int */
- u16 work_limit; /* total work allowed per interrupt */
- u8 count; /* total number of rings in vector */
- u8 itr; /* current ITR setting for ring */
-};
-
-#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \
- ? 8 : 1)
-#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS
-
-/* MAX_MSIX_Q_VECTORS of these are allocated,
- * but we only use one per queue-specific vector.
- */
-struct ixgbe_q_vector {
- struct ixgbe_adapter *adapter;
- unsigned int v_idx; /* index of q_vector within array, also used for
- * finding the bit in EICR and friends that
- * represents the vector for this ring */
-#ifdef CONFIG_IXGBE_DCA
- int cpu; /* CPU for DCA */
-#endif
- struct napi_struct napi;
- struct ixgbe_ring_container rx, tx;
- u32 eitr;
- cpumask_var_t affinity_mask;
- char name[IFNAMSIZ + 9];
-};
-
-/* Helper macros to switch between ints/sec and what the register uses.
- * And yes, it's the same math going both ways. The lowest value
- * supported by all of the ixgbe hardware is 8.
- */
-#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
- ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
-#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
-
-static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring)
-{
- u16 ntc = ring->next_to_clean;
- u16 ntu = ring->next_to_use;
-
- return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1;
-}
-
-#define IXGBE_RX_DESC_ADV(R, i) \
- (&(((union ixgbe_adv_rx_desc *)((R)->desc))[i]))
-#define IXGBE_TX_DESC_ADV(R, i) \
- (&(((union ixgbe_adv_tx_desc *)((R)->desc))[i]))
-#define IXGBE_TX_CTXTDESC_ADV(R, i) \
- (&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i]))
-
-#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
-#ifdef IXGBE_FCOE
-/* Use 3K as the baby jumbo frame size for FCoE */
-#define IXGBE_FCOE_JUMBO_FRAME_SIZE 3072
-#endif /* IXGBE_FCOE */
-
-#define OTHER_VECTOR 1
-#define NON_Q_VECTORS (OTHER_VECTOR)
-
-#define MAX_MSIX_VECTORS_82599 64
-#define MAX_MSIX_Q_VECTORS_82599 64
-#define MAX_MSIX_VECTORS_82598 18
-#define MAX_MSIX_Q_VECTORS_82598 16
-
-#define MAX_MSIX_Q_VECTORS MAX_MSIX_Q_VECTORS_82599
-#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82599
-
-#define MIN_MSIX_Q_VECTORS 2
-#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
-
-/* board specific private data structure */
-struct ixgbe_adapter {
- unsigned long state;
-
- /* Some features need tri-state capability,
- * thus the additional *_CAPABLE flags.
- */
- u32 flags;
-#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
-#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1)
-#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2)
-#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3)
-#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4)
-#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6)
-#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7)
-#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8)
-#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9)
-#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10)
-#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11)
-#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12)
-#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13)
-#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14)
-#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16)
-#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17)
-#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18)
-#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19)
-#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20)
-#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22)
-#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 23)
-#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 24)
-#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 25)
-#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 26)
-#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 27)
-#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 28)
-#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 29)
-
- u32 flags2;
-#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1)
-#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1)
-#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2)
-#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 3)
-#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 4)
-#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 5)
-#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 6)
-#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7)
-
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u16 bd_number;
- struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
-
- /* DCB parameters */
- struct ieee_pfc *ixgbe_ieee_pfc;
- struct ieee_ets *ixgbe_ieee_ets;
- struct ixgbe_dcb_config dcb_cfg;
- struct ixgbe_dcb_config temp_dcb_cfg;
- u8 dcb_set_bitmap;
- u8 dcbx_cap;
- enum ixgbe_fc_mode last_lfc_mode;
-
- /* Interrupt Throttle Rate */
- u32 rx_itr_setting;
- u32 tx_itr_setting;
- u16 eitr_low;
- u16 eitr_high;
-
- /* Work limits */
- u16 tx_work_limit;
-
- /* TX */
- struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp;
- int num_tx_queues;
- u32 tx_timeout_count;
- bool detect_tx_hung;
-
- u64 restart_queue;
- u64 lsc_int;
-
- /* RX */
- struct ixgbe_ring *rx_ring[MAX_RX_QUEUES] ____cacheline_aligned_in_smp;
- int num_rx_queues;
- int num_rx_pools; /* == num_rx_queues in 82598 */
- int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */
- u64 hw_csum_rx_error;
- u64 hw_rx_no_dma_resources;
- u64 non_eop_descs;
- int num_msix_vectors;
- int max_msix_q_vectors; /* true count of q_vectors for device */
- struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE];
- struct msix_entry *msix_entries;
-
- u32 alloc_rx_page_failed;
- u32 alloc_rx_buff_failed;
-
-/* default to trying for four seconds */
-#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ)
-
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- u32 test_icr;
- struct ixgbe_ring test_tx_ring;
- struct ixgbe_ring test_rx_ring;
-
- /* structs defined in ixgbe_hw.h */
- struct ixgbe_hw hw;
- u16 msg_enable;
- struct ixgbe_hw_stats stats;
-
- /* Interrupt Throttle Rate */
- u32 rx_eitr_param;
- u32 tx_eitr_param;
-
- u64 tx_busy;
- unsigned int tx_ring_count;
- unsigned int rx_ring_count;
-
- u32 link_speed;
- bool link_up;
- unsigned long link_check_timeout;
-
- struct work_struct service_task;
- struct timer_list service_timer;
- u32 fdir_pballoc;
- u32 atr_sample_rate;
- unsigned long fdir_overflow; /* number of times ATR was backed off */
- spinlock_t fdir_perfect_lock;
-#ifdef IXGBE_FCOE
- struct ixgbe_fcoe fcoe;
-#endif /* IXGBE_FCOE */
- u64 rsc_total_count;
- u64 rsc_total_flush;
- u32 wol;
- u16 eeprom_version;
-
- int node;
- u32 led_reg;
- u32 interrupt_event;
- char lsc_int_name[IFNAMSIZ + 9];
-
- /* SR-IOV */
- DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS);
- unsigned int num_vfs;
- struct vf_data_storage *vfinfo;
- int vf_rate_link_speed;
- struct vf_macvlans vf_mvs;
- struct vf_macvlans *mv_list;
- bool antispoofing_enabled;
-
- struct hlist_head fdir_filter_list;
- union ixgbe_atr_input fdir_mask;
- int fdir_filter_count;
-};
-
-struct ixgbe_fdir_filter {
- struct hlist_node fdir_node;
- union ixgbe_atr_input filter;
- u16 sw_idx;
- u16 action;
-};
-
-enum ixbge_state_t {
- __IXGBE_TESTING,
- __IXGBE_RESETTING,
- __IXGBE_DOWN,
- __IXGBE_SERVICE_SCHED,
- __IXGBE_IN_SFP_INIT,
-};
-
-struct ixgbe_rsc_cb {
- dma_addr_t dma;
- u16 skb_cnt;
- bool delay_unmap;
-};
-#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb)
-
-enum ixgbe_boards {
- board_82598,
- board_82599,
- board_X540,
-};
-
-extern struct ixgbe_info ixgbe_82598_info;
-extern struct ixgbe_info ixgbe_82599_info;
-extern struct ixgbe_info ixgbe_X540_info;
-#ifdef CONFIG_IXGBE_DCB
-extern const struct dcbnl_rtnl_ops dcbnl_ops;
-extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
- struct ixgbe_dcb_config *dst_dcb_cfg,
- int tc_max);
-#endif
-
-extern char ixgbe_driver_name[];
-extern const char ixgbe_driver_version[];
-
-extern int ixgbe_up(struct ixgbe_adapter *adapter);
-extern void ixgbe_down(struct ixgbe_adapter *adapter);
-extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter);
-extern void ixgbe_reset(struct ixgbe_adapter *adapter);
-extern void ixgbe_set_ethtool_ops(struct net_device *netdev);
-extern int ixgbe_setup_rx_resources(struct ixgbe_ring *);
-extern int ixgbe_setup_tx_resources(struct ixgbe_ring *);
-extern void ixgbe_free_rx_resources(struct ixgbe_ring *);
-extern void ixgbe_free_tx_resources(struct ixgbe_ring *);
-extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
-extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *);
-extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *);
-extern void ixgbe_update_stats(struct ixgbe_adapter *adapter);
-extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter);
-extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter);
-extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *,
- struct ixgbe_adapter *,
- struct ixgbe_ring *);
-extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *,
- struct ixgbe_tx_buffer *);
-extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16);
-extern void ixgbe_write_eitr(struct ixgbe_q_vector *);
-extern int ethtool_ioctl(struct ifreq *ifr);
-extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw);
-extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl);
-extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl);
-extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_hash_dword input,
- union ixgbe_atr_hash_dword common,
- u8 queue);
-extern s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input_mask);
-extern s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input,
- u16 soft_id, u8 queue);
-extern s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input,
- u16 soft_id);
-extern void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
- union ixgbe_atr_input *mask);
-extern void ixgbe_set_rx_mode(struct net_device *netdev);
-extern int ixgbe_setup_tc(struct net_device *dev, u8 tc);
-extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32);
-extern void ixgbe_do_reset(struct net_device *netdev);
-#ifdef IXGBE_FCOE
-extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter);
-extern int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
- u32 tx_flags, u8 *hdr_len);
-extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter);
-extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
- union ixgbe_adv_rx_desc *rx_desc,
- struct sk_buff *skb,
- u32 staterr);
-extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc);
-extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc);
-extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid);
-extern int ixgbe_fcoe_enable(struct net_device *netdev);
-extern int ixgbe_fcoe_disable(struct net_device *netdev);
-#ifdef CONFIG_IXGBE_DCB
-extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
-extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
-#endif /* CONFIG_IXGBE_DCB */
-extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
-#endif /* IXGBE_FCOE */
-
-#endif /* _IXGBE_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe.h"
-#include "ixgbe_phy.h"
-
-#define IXGBE_82598_MAX_TX_QUEUES 32
-#define IXGBE_82598_MAX_RX_QUEUES 64
-#define IXGBE_82598_RAR_ENTRIES 16
-#define IXGBE_82598_MC_TBL_SIZE 128
-#define IXGBE_82598_VFT_TBL_SIZE 128
-#define IXGBE_82598_RX_PB_SIZE 512
-
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data);
-
-/**
- * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout
- * @hw: pointer to the HW structure
- *
- * The defaults for 82598 should be in the range of 50us to 50ms,
- * however the hardware default for these parts is 500us to 1ms which is less
- * than the 10ms recommended by the pci-e spec. To address this we need to
- * increase the value to either 10ms to 250ms for capability version 1 config,
- * or 16ms to 55ms for version 2.
- **/
-static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR);
- u16 pcie_devctl2;
-
- /* only take action if timeout value is defaulted to 0 */
- if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK)
- goto out;
-
- /*
- * if capababilities version is type 1 we can write the
- * timeout of 10ms to 250ms through the GCR register
- */
- if (!(gcr & IXGBE_GCR_CAP_VER2)) {
- gcr |= IXGBE_GCR_CMPL_TMOUT_10ms;
- goto out;
- }
-
- /*
- * for version 2 capabilities we need to write the config space
- * directly in order to set the completion timeout value for
- * 16ms to 55ms
- */
- pci_read_config_word(adapter->pdev,
- IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2);
- pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms;
- pci_write_config_word(adapter->pdev,
- IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2);
-out:
- /* disable completion timeout resend */
- gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND;
- IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr);
-}
-
-/**
- * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
- * @hw: pointer to hardware structure
- *
- * Read PCIe configuration space, and get the MSI-X vector count from
- * the capabilities table.
- **/
-static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- u16 msix_count;
- pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS,
- &msix_count);
- msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
-
- /* MSI-X count is zero-based in HW, so increment to give proper value */
- msix_count++;
-
- return msix_count;
-}
-
-/**
- */
-static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
-
- /* Call PHY identify routine to get the phy type */
- ixgbe_identify_phy_generic(hw);
-
- mac->mcft_size = IXGBE_82598_MC_TBL_SIZE;
- mac->vft_size = IXGBE_82598_VFT_TBL_SIZE;
- mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
- mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
- mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
- mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_init_phy_ops_82598 - PHY/SFP specific init
- * @hw: pointer to hardware structure
- *
- * Initialize any function pointers that were not able to be
- * set during get_invariants because the PHY/SFP type was
- * not known. Perform the SFP init if necessary.
- *
- **/
-static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
- struct ixgbe_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
- u16 list_offset, data_offset;
-
- /* Identify the PHY */
- phy->ops.identify(hw);
-
- /* Overwrite the link function pointers if copper PHY */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
- mac->ops.setup_link = &ixgbe_setup_copper_link_82598;
- mac->ops.get_link_capabilities =
- &ixgbe_get_copper_link_capabilities_generic;
- }
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
- phy->ops.check_link = &ixgbe_check_phy_link_tnx;
- phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_tnx;
- break;
- case ixgbe_phy_nl:
- phy->ops.reset = &ixgbe_reset_phy_nl;
-
- /* Call SFP+ identify routine to get the SFP+ module type */
- ret_val = phy->ops.identify_sfp(hw);
- if (ret_val != 0)
- goto out;
- else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) {
- ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
- goto out;
- }
-
- /* Check to see if SFP+ module is supported */
- ret_val = ixgbe_get_sfp_init_sequence_offsets(hw,
- &list_offset,
- &data_offset);
- if (ret_val != 0) {
- ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED;
- goto out;
- }
- break;
- default:
- break;
- }
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware using the generic start_hw function.
- * Disables relaxed ordering Then set pcie completion timeout
- *
- **/
-static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw)
-{
- u32 regval;
- u32 i;
- s32 ret_val = 0;
-
- ret_val = ixgbe_start_hw_generic(hw);
-
- /* Disable relaxed ordering */
- for (i = 0; ((i < hw->mac.max_tx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
- regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval);
- }
-
- for (i = 0; ((i < hw->mac.max_rx_queues) &&
- (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
- IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
- }
-
- hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE;
-
- /* set the completion timeout for interface */
- if (ret_val == 0)
- ixgbe_set_pcie_completion_timeout(hw);
-
- return ret_val;
-}
-
-/**
- * ixgbe_get_link_capabilities_82598 - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
- *
- * Determines the link capabilities by reading the AUTOC register.
- **/
-static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
-{
- s32 status = 0;
- u32 autoc = 0;
-
- /*
- * Determine link capabilities based on the stored value of AUTOC,
- * which represents EEPROM defaults. If AUTOC value has not been
- * stored, use the current register value.
- */
- if (hw->mac.orig_link_settings_stored)
- autoc = hw->mac.orig_autoc;
- else
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = false;
- break;
-
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- *autoneg = false;
- break;
-
- case IXGBE_AUTOC_LMS_1G_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = true;
- break;
-
- case IXGBE_AUTOC_LMS_KX4_AN:
- case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
- *speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *autoneg = true;
- break;
-
- default:
- status = IXGBE_ERR_LINK_SETUP;
- break;
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_media_type_82598 - Determines media type
- * @hw: pointer to hardware structure
- *
- * Returns the media type (fiber, copper, backplane)
- **/
-static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
-{
- enum ixgbe_media_type media_type;
-
- /* Detect if there is a copper PHY attached. */
- switch (hw->phy.type) {
- case ixgbe_phy_cu_unknown:
- case ixgbe_phy_tn:
- case ixgbe_phy_aq:
- media_type = ixgbe_media_type_copper;
- goto out;
- default:
- break;
- }
-
- /* Media type for I82598 is based on device ID */
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598:
- case IXGBE_DEV_ID_82598_BX:
- /* Default device ID is mezzanine card KX/KX4 */
- media_type = ixgbe_media_type_backplane;
- break;
- case IXGBE_DEV_ID_82598AF_DUAL_PORT:
- case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
- case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
- case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
- case IXGBE_DEV_ID_82598EB_XF_LR:
- case IXGBE_DEV_ID_82598EB_SFP_LOM:
- media_type = ixgbe_media_type_fiber;
- break;
- case IXGBE_DEV_ID_82598EB_CX4:
- case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
- media_type = ixgbe_media_type_cx4;
- break;
- case IXGBE_DEV_ID_82598AT:
- case IXGBE_DEV_ID_82598AT2:
- media_type = ixgbe_media_type_copper;
- break;
- default:
- media_type = ixgbe_media_type_unknown;
- break;
- }
-out:
- return media_type;
-}
-
-/**
- * ixgbe_fc_enable_82598 - Enable flow control
- * @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
- *
- * Enable flow control according to the current settings.
- **/
-static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
- s32 ret_val = 0;
- u32 fctrl_reg;
- u32 rmcs_reg;
- u32 reg;
- u32 rx_pba_size;
- u32 link_speed = 0;
- bool link_up;
-
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc)
- goto out;
-
-#endif /* CONFIG_DCB */
- /*
- * On 82598 having Rx FC on causes resets while doing 1G
- * so if it's on turn it off once we know link_speed. For
- * more details see 82598 Specification update.
- */
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
- if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) {
- switch (hw->fc.requested_mode) {
- case ixgbe_fc_full:
- hw->fc.requested_mode = ixgbe_fc_tx_pause;
- break;
- case ixgbe_fc_rx_pause:
- hw->fc.requested_mode = ixgbe_fc_none;
- break;
- default:
- /* no change */
- break;
- }
- }
-
- /* Negotiate the fc mode to use */
- ret_val = ixgbe_fc_autoneg(hw);
- if (ret_val == IXGBE_ERR_FLOW_CONTROL)
- goto out;
-
- /* Disable any previous flow control settings */
- fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
-
- rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
- rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
-
- /*
- * The possible values of fc.current_mode are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but
- * we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
- * other: Invalid.
- */
- switch (hw->fc.current_mode) {
- case ixgbe_fc_none:
- /*
- * Flow control is disabled by software override or autoneg.
- * The code below will actually disable it in the HW.
- */
- break;
- case ixgbe_fc_rx_pause:
- /*
- * Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- fctrl_reg |= IXGBE_FCTRL_RFCE;
- break;
- case ixgbe_fc_tx_pause:
- /*
- * Tx Flow control is enabled, and Rx Flow control is
- * disabled by software override.
- */
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
- case ixgbe_fc_full:
- /* Flow control (both Rx and Tx) is enabled by SW override. */
- fctrl_reg |= IXGBE_FCTRL_RFCE;
- rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
- break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
- break;
-#endif /* CONFIG_DCB */
- default:
- hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = IXGBE_ERR_CONFIG;
- goto out;
- break;
- }
-
- /* Set 802.3x based flow control settings. */
- fctrl_reg |= IXGBE_FCTRL_DPF;
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg);
- IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
-
- /* Set up and enable Rx high/low water mark thresholds, enable XON. */
- if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
- rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
- rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
-
- reg = (rx_pba_size - hw->fc.low_water) << 6;
- if (hw->fc.send_xon)
- reg |= IXGBE_FCRTL_XONE;
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg);
-
- reg = (rx_pba_size - hw->fc.high_water) << 6;
- reg |= IXGBE_FCRTH_FCEN;
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg);
- }
-
- /* Configure pause time (2 TCs per register) */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
- if ((packetbuf_num & 1) == 0)
- reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
- else
- reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_start_mac_link_82598 - Configures MAC link settings
- * @hw: pointer to hardware structure
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed.
- **/
-static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete)
-{
- u32 autoc_reg;
- u32 links_reg;
- u32 i;
- s32 status = 0;
-
- /* Restart link */
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- /* Only poll for autoneg to complete if specified to do so */
- if (autoneg_wait_to_complete) {
- if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
- IXGBE_AUTOC_LMS_KX4_AN ||
- (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
- IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
- links_reg = 0; /* Just in case Autoneg time = 0 */
- for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (links_reg & IXGBE_LINKS_KX_AN_COMP)
- break;
- msleep(100);
- }
- if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
- status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw, "Autonegotiation did not complete.\n");
- }
- }
- }
-
- /* Add delay to filter out noises during initial link setup */
- msleep(50);
-
- return status;
-}
-
-/**
- * ixgbe_validate_link_ready - Function looks for phy link
- * @hw: pointer to hardware structure
- *
- * Function indicates success when phy link is available. If phy is not ready
- * within 5 seconds of MAC indicating link, the function returns error.
- **/
-static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw)
-{
- u32 timeout;
- u16 an_reg;
-
- if (hw->device_id != IXGBE_DEV_ID_82598AT2)
- return 0;
-
- for (timeout = 0;
- timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) {
- hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg);
-
- if ((an_reg & MDIO_AN_STAT1_COMPLETE) &&
- (an_reg & MDIO_STAT1_LSTATUS))
- break;
-
- msleep(100);
- }
-
- if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) {
- hw_dbg(hw, "Link was indicated but link is down\n");
- return IXGBE_ERR_LINK_SETUP;
- }
-
- return 0;
-}
-
-/**
- * ixgbe_check_mac_link_82598 - Get link/speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true is link is up, false otherwise
- * @link_up_wait_to_complete: bool used to wait for link up or not
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed, bool *link_up,
- bool link_up_wait_to_complete)
-{
- u32 links_reg;
- u32 i;
- u16 link_reg, adapt_comp_reg;
-
- /*
- * SERDES PHY requires us to read link status from register 0xC79F.
- * Bit 0 set indicates link is up/ready; clear indicates link down.
- * 0xC00C is read to check that the XAUI lanes are active. Bit 0
- * clear indicates active; set indicates inactive.
- */
- if (hw->phy.type == ixgbe_phy_nl) {
- hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
- hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg);
- hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD,
- &adapt_comp_reg);
- if (link_up_wait_to_complete) {
- for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
- if ((link_reg & 1) &&
- ((adapt_comp_reg & 1) == 0)) {
- *link_up = true;
- break;
- } else {
- *link_up = false;
- }
- msleep(100);
- hw->phy.ops.read_reg(hw, 0xC79F,
- MDIO_MMD_PMAPMD,
- &link_reg);
- hw->phy.ops.read_reg(hw, 0xC00C,
- MDIO_MMD_PMAPMD,
- &adapt_comp_reg);
- }
- } else {
- if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0))
- *link_up = true;
- else
- *link_up = false;
- }
-
- if (*link_up == false)
- goto out;
- }
-
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (link_up_wait_to_complete) {
- for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
- if (links_reg & IXGBE_LINKS_UP) {
- *link_up = true;
- break;
- } else {
- *link_up = false;
- }
- msleep(100);
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- }
- } else {
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
- }
-
- if (links_reg & IXGBE_LINKS_SPEED)
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- else
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) &&
- (ixgbe_validate_link_ready(hw) != 0))
- *link_up = false;
-
- /* if link is down, zero out the current_mode */
- if (*link_up == false) {
- hw->fc.current_mode = ixgbe_fc_none;
- hw->fc.fc_was_autonegged = false;
- }
-out:
- return 0;
-}
-
-/**
- * ixgbe_setup_mac_link_82598 - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if auto-negotiation enabled
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
- ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
- u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 autoc = curr_autoc;
- u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
-
- /* Check to see if speed passed in is supported. */
- ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg);
- speed &= link_capabilities;
-
- if (speed == IXGBE_LINK_SPEED_UNKNOWN)
- status = IXGBE_ERR_LINK_SETUP;
-
- /* Set KX4/KX support according to speed requested */
- else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN ||
- link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
- autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK;
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- autoc |= IXGBE_AUTOC_KX4_SUPP;
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- autoc |= IXGBE_AUTOC_KX_SUPP;
- if (autoc != curr_autoc)
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
- }
-
- if (status == 0) {
- /*
- * Setup and restart the link based on the new values in
- * ixgbe_hw This will write the AUTOC register based on the new
- * stored values
- */
- status = ixgbe_start_mac_link_82598(hw,
- autoneg_wait_to_complete);
- }
-
- return status;
-}
-
-
-/**
- * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true if waiting is needed to complete
- *
- * Sets the link speed in the AUTOC register in the MAC and restarts link.
- **/
-static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status;
-
- /* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
- /* Set up MAC */
- ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete);
-
- return status;
-}
-
-/**
- * ixgbe_reset_hw_82598 - Performs hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by resetting the transmit and receive units, masks and
- * clears all interrupts, performing a PHY reset, and performing a link (MAC)
- * reset.
- **/
-static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- s32 phy_status = 0;
- u32 ctrl;
- u32 gheccr;
- u32 i;
- u32 autoc;
- u8 analog_val;
-
- /* Call adapter stop to disable tx/rx and clear interrupts */
- hw->mac.ops.stop_adapter(hw);
-
- /*
- * Power up the Atlas Tx lanes if they are currently powered down.
- * Atlas Tx lanes are powered down for MAC loopback tests, but
- * they are not automatically restored on reset.
- */
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val);
- if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) {
- /* Enable Tx Atlas so packets can be transmitted again */
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
- &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK,
- analog_val);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
- &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G,
- analog_val);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
- &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G,
- analog_val);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
- &analog_val);
- analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN,
- analog_val);
- }
-
- /* Reset PHY */
- if (hw->phy.reset_disable == false) {
- /* PHY ops must be identified and initialized prior to reset */
-
- /* Init PHY and function pointers, perform SFP setup */
- phy_status = hw->phy.ops.init(hw);
- if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto reset_hw_out;
- else if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto no_phy_reset;
-
- hw->phy.ops.reset(hw);
- }
-
-no_phy_reset:
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests before reset
- */
- ixgbe_disable_pcie_master(hw);
-
-mac_reset_top:
- /*
- * Issue global reset to the MAC. This needs to be a SW reset.
- * If link reset is used, it might reset the MAC when mng is using it
- */
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
- IXGBE_WRITE_FLUSH(hw);
-
- /* Poll for reset bit to self-clear indicating reset is complete */
- for (i = 0; i < 10; i++) {
- udelay(1);
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
- break;
- }
- if (ctrl & IXGBE_CTRL_RST) {
- status = IXGBE_ERR_RESET_FAILED;
- hw_dbg(hw, "Reset polling failed to complete.\n");
- }
-
- /*
- * Double resets are required for recovery from certain error
- * conditions. Between resets, it is necessary to stall to allow time
- * for any pending HW events to complete. We use 1usec since that is
- * what is needed for ixgbe_disable_pcie_master(). The second reset
- * then clears out any effects of those events.
- */
- if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
- hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
- udelay(1);
- goto mac_reset_top;
- }
-
- msleep(50);
-
- gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
- gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
- IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
-
- /*
- * Store the original AUTOC value if it has not been
- * stored off yet. Otherwise restore the stored original
- * AUTOC value since the reset operation sets back to deaults.
- */
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- if (hw->mac.orig_link_settings_stored == false) {
- hw->mac.orig_autoc = autoc;
- hw->mac.orig_link_settings_stored = true;
- } else if (autoc != hw->mac.orig_autoc) {
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc);
- }
-
- /* Store the permanent mac address */
- hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
-
- /*
- * Store MAC address from RAR0, clear receive address registers, and
- * clear the multicast table
- */
- hw->mac.ops.init_rx_addrs(hw);
-
-reset_hw_out:
- if (phy_status)
- status = phy_status;
-
- return status;
-}
-
-/**
- * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq set index
- **/
-static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 rar_high;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /* Make sure we are using a valid rar index range */
- if (rar >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
- rar_high &= ~IXGBE_RAH_VIND_MASK;
- rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
- return 0;
-}
-
-/**
- * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq clear index (not used in 82598, but elsewhere)
- **/
-static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 rar_high;
- u32 rar_entries = hw->mac.num_rar_entries;
-
-
- /* Make sure we are using a valid rar index range */
- if (rar >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar));
- if (rar_high & IXGBE_RAH_VIND_MASK) {
- rar_high &= ~IXGBE_RAH_VIND_MASK;
- IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_set_vfta_82598 - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFTA
- * @vlan_on: boolean flag to turn on/off VLAN in VFTA
- *
- * Turn on/off specified VLAN in the VLAN filter table.
- **/
-static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
-{
- u32 regindex;
- u32 bitindex;
- u32 bits;
- u32 vftabyte;
-
- if (vlan > 4095)
- return IXGBE_ERR_PARAM;
-
- /* Determine 32-bit word position in array */
- regindex = (vlan >> 5) & 0x7F; /* upper seven bits */
-
- /* Determine the location of the (VMD) queue index */
- vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
- bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */
-
- /* Set the nibble for VMD queue index */
- bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex));
- bits &= (~(0x0F << bitindex));
- bits |= (vind << bitindex);
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits);
-
- /* Determine the location of the bit for this VLAN id */
- bitindex = vlan & 0x1F; /* lower five bits */
-
- bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
- if (vlan_on)
- /* Turn on this VLAN id */
- bits |= (1 << bitindex);
- else
- /* Turn off this VLAN id */
- bits &= ~(1 << bitindex);
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits);
-
- return 0;
-}
-
-/**
- * ixgbe_clear_vfta_82598 - Clear VLAN filter table
- * @hw: pointer to hardware structure
- *
- * Clears the VLAN filer table, and the VMDq index associated with the filter
- **/
-static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw)
-{
- u32 offset;
- u32 vlanbyte;
-
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
-
- for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
- 0);
-
- return 0;
-}
-
-/**
- * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
- *
- * Performs read operation to Atlas analog register specified.
- **/
-static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
- u32 atlas_ctl;
-
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL,
- IXGBE_ATLASCTL_WRITE_CMD | (reg << 8));
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
- atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
- *val = (u8)atlas_ctl;
-
- return 0;
-}
-
-/**
- * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register
- * @hw: pointer to hardware structure
- * @reg: atlas register to write
- * @val: value to write
- *
- * Performs write operation to Atlas analog register specified.
- **/
-static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
- u32 atlas_ctl;
-
- atlas_ctl = (reg << 8) | val;
- IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl);
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
-
- return 0;
-}
-
-/**
- * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface.
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
- *
- * Performs 8 byte read operation to SFP module's EEPROM over I2C interface.
- **/
-static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data)
-{
- s32 status = 0;
- u16 sfp_addr = 0;
- u16 sfp_data = 0;
- u16 sfp_stat = 0;
- u32 i;
-
- if (hw->phy.type == ixgbe_phy_nl) {
- /*
- * phy SDA/SCL registers are at addresses 0xC30A to
- * 0xC30D. These registers are used to talk to the SFP+
- * module's EEPROM through the SDA/SCL (I2C) interface.
- */
- sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset;
- sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK);
- hw->phy.ops.write_reg(hw,
- IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR,
- MDIO_MMD_PMAPMD,
- sfp_addr);
-
- /* Poll status */
- for (i = 0; i < 100; i++) {
- hw->phy.ops.read_reg(hw,
- IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT,
- MDIO_MMD_PMAPMD,
- &sfp_stat);
- sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK;
- if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS)
- break;
- usleep_range(10000, 20000);
- }
-
- if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) {
- hw_dbg(hw, "EEPROM read did not pass.\n");
- status = IXGBE_ERR_SFP_NOT_PRESENT;
- goto out;
- }
-
- /* Read data */
- hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA,
- MDIO_MMD_PMAPMD, &sfp_data);
-
- *eeprom_data = (u8)(sfp_data >> 8);
- } else {
- status = IXGBE_ERR_PHY;
- goto out;
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
- u16 ext_ability = 0;
-
- hw->phy.ops.identify(hw);
-
- /* Copper PHY must be checked before AUTOC LMS to determine correct
- * physical layer because 10GBase-T PHYs use LMS = KX4/KX */
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- case ixgbe_phy_aq:
- case ixgbe_phy_cu_unknown:
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE,
- MDIO_MMD_PMAPMD, &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
- goto out;
- default:
- break;
- }
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_AN:
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- if (pma_pmd_1g == IXGBE_AUTOC_1G_KX)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- else
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
- break;
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
- else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- else /* XAUI */
- physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- break;
- case IXGBE_AUTOC_LMS_KX4_AN:
- case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- break;
- default:
- break;
- }
-
- if (hw->phy.type == ixgbe_phy_nl) {
- hw->phy.ops.identify_sfp(hw);
-
- switch (hw->phy.sfp_type) {
- case ixgbe_sfp_type_da_cu:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_sfp_type_sr:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- break;
- case ixgbe_sfp_type_lr:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- break;
- default:
- physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- break;
- }
- }
-
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82598_DA_DUAL_PORT:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case IXGBE_DEV_ID_82598AF_DUAL_PORT:
- case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
- case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- break;
- case IXGBE_DEV_ID_82598EB_XF_LR:
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- break;
- default:
- break;
- }
-
-out:
- return physical_layer;
-}
-
-/**
- * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple
- * port devices.
- * @hw: pointer to the HW structure
- *
- * Calls common function and corrects issue with some single port devices
- * that enable LAN1 but not LAN0.
- **/
-static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw)
-{
- struct ixgbe_bus_info *bus = &hw->bus;
- u16 pci_gen = 0;
- u16 pci_ctrl2 = 0;
-
- ixgbe_set_lan_id_multi_port_pcie(hw);
-
- /* check if LAN0 is disabled */
- hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen);
- if ((pci_gen != 0) && (pci_gen != 0xFFFF)) {
-
- hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2);
-
- /* if LAN0 is completely disabled force function to 0 */
- if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) &&
- !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) &&
- !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) {
-
- bus->func = 0;
- }
- }
-}
-
-/**
- * ixgbe_set_rxpba_82598 - Configure packet buffers
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure packet buffers.
- */
-static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom,
- int strategy)
-{
- u32 rxpktsize = IXGBE_RXPBSIZE_64KB;
- u8 i = 0;
-
- if (!num_pb)
- return;
-
- /* Setup Rx packet buffer sizes */
- switch (strategy) {
- case PBA_STRATEGY_WEIGHTED:
- /* Setup the first four at 80KB */
- rxpktsize = IXGBE_RXPBSIZE_80KB;
- for (; i < 4; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
- /* Setup the last four at 48KB...don't re-init i */
- rxpktsize = IXGBE_RXPBSIZE_48KB;
- /* Fall Through */
- case PBA_STRATEGY_EQUAL:
- default:
- /* Divide the remaining Rx packet buffer evenly among the TCs */
- for (; i < IXGBE_MAX_PACKET_BUFFERS; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
- break;
- }
-
- /* Setup Tx packet buffer sizes */
- for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++)
- IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB);
-
- return;
-}
-
-static struct ixgbe_mac_operations mac_ops_82598 = {
- .init_hw = &ixgbe_init_hw_generic,
- .reset_hw = &ixgbe_reset_hw_82598,
- .start_hw = &ixgbe_start_hw_82598,
- .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
- .get_media_type = &ixgbe_get_media_type_82598,
- .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598,
- .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
- .get_mac_addr = &ixgbe_get_mac_addr_generic,
- .stop_adapter = &ixgbe_stop_adapter_generic,
- .get_bus_info = &ixgbe_get_bus_info_generic,
- .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598,
- .read_analog_reg8 = &ixgbe_read_analog_reg8_82598,
- .write_analog_reg8 = &ixgbe_write_analog_reg8_82598,
- .setup_link = &ixgbe_setup_mac_link_82598,
- .set_rxpba = &ixgbe_set_rxpba_82598,
- .check_link = &ixgbe_check_mac_link_82598,
- .get_link_capabilities = &ixgbe_get_link_capabilities_82598,
- .led_on = &ixgbe_led_on_generic,
- .led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
- .set_rar = &ixgbe_set_rar_generic,
- .clear_rar = &ixgbe_clear_rar_generic,
- .set_vmdq = &ixgbe_set_vmdq_82598,
- .clear_vmdq = &ixgbe_clear_vmdq_82598,
- .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
- .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
- .enable_mc = &ixgbe_enable_mc_generic,
- .disable_mc = &ixgbe_disable_mc_generic,
- .clear_vfta = &ixgbe_clear_vfta_82598,
- .set_vfta = &ixgbe_set_vfta_82598,
- .fc_enable = &ixgbe_fc_enable_82598,
- .set_fw_drv_ver = NULL,
- .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
- .release_swfw_sync = &ixgbe_release_swfw_sync,
-};
-
-static struct ixgbe_eeprom_operations eeprom_ops_82598 = {
- .init_params = &ixgbe_init_eeprom_params_generic,
- .read = &ixgbe_read_eerd_generic,
- .read_buffer = &ixgbe_read_eerd_buffer_generic,
- .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
- .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
- .update_checksum = &ixgbe_update_eeprom_checksum_generic,
-};
-
-static struct ixgbe_phy_operations phy_ops_82598 = {
- .identify = &ixgbe_identify_phy_generic,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
- .init = &ixgbe_init_phy_ops_82598,
- .reset = &ixgbe_reset_phy_generic,
- .read_reg = &ixgbe_read_phy_reg_generic,
- .write_reg = &ixgbe_write_phy_reg_generic,
- .setup_link = &ixgbe_setup_phy_link_generic,
- .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
- .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598,
- .check_overtemp = &ixgbe_tn_check_overtemp,
-};
-
-struct ixgbe_info ixgbe_82598_info = {
- .mac = ixgbe_mac_82598EB,
- .get_invariants = &ixgbe_get_invariants_82598,
- .mac_ops = &mac_ops_82598,
- .eeprom_ops = &eeprom_ops_82598,
- .phy_ops = &phy_ops_82598,
-};
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe.h"
-#include "ixgbe_phy.h"
-#include "ixgbe_mbx.h"
-
-#define IXGBE_82599_MAX_TX_QUEUES 128
-#define IXGBE_82599_MAX_RX_QUEUES 128
-#define IXGBE_82599_RAR_ENTRIES 128
-#define IXGBE_82599_MC_TBL_SIZE 128
-#define IXGBE_82599_VFT_TBL_SIZE 128
-#define IXGBE_82599_RX_PB_SIZE 512
-
-static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
-static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
-
-static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
-
- /* enable the laser control functions for SFP+ fiber */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) {
- mac->ops.disable_tx_laser =
- &ixgbe_disable_tx_laser_multispeed_fiber;
- mac->ops.enable_tx_laser =
- &ixgbe_enable_tx_laser_multispeed_fiber;
- mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
- } else {
- mac->ops.disable_tx_laser = NULL;
- mac->ops.enable_tx_laser = NULL;
- mac->ops.flap_tx_laser = NULL;
- }
-
- if (hw->phy.multispeed_fiber) {
- /* Set up dual speed SFP+ support */
- mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
- } else {
- if ((mac->ops.get_media_type(hw) ==
- ixgbe_media_type_backplane) &&
- (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
- hw->phy.smart_speed == ixgbe_smart_speed_on) &&
- !ixgbe_verify_lesm_fw_enabled_82599(hw))
- mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
- else
- mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
- }
-}
-
-static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
-{
- s32 ret_val = 0;
- u32 reg_anlp1 = 0;
- u32 i = 0;
- u16 list_offset, data_offset, data_value;
-
- if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
- ixgbe_init_mac_link_ops_82599(hw);
-
- hw->phy.ops.reset = NULL;
-
- ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
- &data_offset);
- if (ret_val != 0)
- goto setup_sfp_out;
-
- /* PHY config will finish before releasing the semaphore */
- ret_val = hw->mac.ops.acquire_swfw_sync(hw,
- IXGBE_GSSR_MAC_CSR_SM);
- if (ret_val != 0) {
- ret_val = IXGBE_ERR_SWFW_SYNC;
- goto setup_sfp_out;
- }
-
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
- while (data_value != 0xffff) {
- IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
- IXGBE_WRITE_FLUSH(hw);
- hw->eeprom.ops.read(hw, ++data_offset, &data_value);
- }
-
- /* Release the semaphore */
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
- /*
- * Delay obtaining semaphore again to allow FW access,
- * semaphore_delay is in ms usleep_range needs us.
- */
- usleep_range(hw->eeprom.semaphore_delay * 1000,
- hw->eeprom.semaphore_delay * 2000);
-
- /* Now restart DSP by setting Restart_AN and clearing LMS */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw,
- IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) |
- IXGBE_AUTOC_AN_RESTART));
-
- /* Wait for AN to leave state 0 */
- for (i = 0; i < 10; i++) {
- usleep_range(4000, 8000);
- reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1);
- if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)
- break;
- }
- if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) {
- hw_dbg(hw, "sfp module setup not complete\n");
- ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE;
- goto setup_sfp_out;
- }
-
- /* Restart DSP by setting Restart_AN and return to SFI mode */
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw,
- IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL |
- IXGBE_AUTOC_AN_RESTART));
- }
-
-setup_sfp_out:
- return ret_val;
-}
-
-static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
-
- ixgbe_init_mac_link_ops_82599(hw);
-
- mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
- mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
- mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
- mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
- mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
- mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_init_phy_ops_82599 - PHY/SFP specific init
- * @hw: pointer to hardware structure
- *
- * Initialize any function pointers that were not able to be
- * set during get_invariants because the PHY/SFP type was
- * not known. Perform the SFP init if necessary.
- *
- **/
-static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
- struct ixgbe_phy_info *phy = &hw->phy;
- s32 ret_val = 0;
-
- /* Identify the PHY or SFP module */
- ret_val = phy->ops.identify(hw);
-
- /* Setup function pointers based on detected SFP module and speeds */
- ixgbe_init_mac_link_ops_82599(hw);
-
- /* If copper media, overwrite with copper function pointers */
- if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
- mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
- mac->ops.get_link_capabilities =
- &ixgbe_get_copper_link_capabilities_generic;
- }
-
- /* Set necessary function pointers based on phy type */
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- phy->ops.check_link = &ixgbe_check_phy_link_tnx;
- phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
- phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_tnx;
- break;
- case ixgbe_phy_aq:
- phy->ops.get_firmware_version =
- &ixgbe_get_phy_firmware_version_generic;
- break;
- default:
- break;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbe_get_link_capabilities_82599 - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @negotiation: true when autoneg or autotry is enabled
- *
- * Determines the link capabilities by reading the AUTOC register.
- **/
-static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *negotiation)
-{
- s32 status = 0;
- u32 autoc = 0;
-
- /* Determine 1G link capabilities off of SFP+ type */
- if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) {
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
- goto out;
- }
-
- /*
- * Determine link capabilities based on the stored value of AUTOC,
- * which represents EEPROM defaults. If AUTOC value has not been
- * stored, use the current register value.
- */
- if (hw->mac.orig_link_settings_stored)
- autoc = hw->mac.orig_autoc;
- else
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = false;
- break;
-
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = false;
- break;
-
- case IXGBE_AUTOC_LMS_1G_AN:
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
- break;
-
- case IXGBE_AUTOC_LMS_10G_SERIAL:
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- *negotiation = false;
- break;
-
- case IXGBE_AUTOC_LMS_KX4_KX_KR:
- case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
- *speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (autoc & IXGBE_AUTOC_KR_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
- break;
-
- case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
- *speed = IXGBE_LINK_SPEED_100_FULL;
- if (autoc & IXGBE_AUTOC_KR_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
- break;
-
- case IXGBE_AUTOC_LMS_SGMII_1G_100M:
- *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
- *negotiation = false;
- break;
-
- default:
- status = IXGBE_ERR_LINK_SETUP;
- goto out;
- break;
- }
-
- if (hw->phy.multispeed_fiber) {
- *speed |= IXGBE_LINK_SPEED_10GB_FULL |
- IXGBE_LINK_SPEED_1GB_FULL;
- *negotiation = true;
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_get_media_type_82599 - Get media type
- * @hw: pointer to hardware structure
- *
- * Returns the media type (fiber, copper, backplane)
- **/
-static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
-{
- enum ixgbe_media_type media_type;
-
- /* Detect if there is a copper PHY attached. */
- switch (hw->phy.type) {
- case ixgbe_phy_cu_unknown:
- case ixgbe_phy_tn:
- case ixgbe_phy_aq:
- media_type = ixgbe_media_type_copper;
- goto out;
- default:
- break;
- }
-
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82599_KX4:
- case IXGBE_DEV_ID_82599_KX4_MEZZ:
- case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
- case IXGBE_DEV_ID_82599_KR:
- case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
- case IXGBE_DEV_ID_82599_XAUI_LOM:
- /* Default device ID is mezzanine card KX/KX4 */
- media_type = ixgbe_media_type_backplane;
- break;
- case IXGBE_DEV_ID_82599_SFP:
- case IXGBE_DEV_ID_82599_SFP_FCOE:
- case IXGBE_DEV_ID_82599_SFP_EM:
- case IXGBE_DEV_ID_82599_SFP_SF2:
- media_type = ixgbe_media_type_fiber;
- break;
- case IXGBE_DEV_ID_82599_CX4:
- media_type = ixgbe_media_type_cx4;
- break;
- case IXGBE_DEV_ID_82599_T3_LOM:
- media_type = ixgbe_media_type_copper;
- break;
- case IXGBE_DEV_ID_82599_LS:
- media_type = ixgbe_media_type_fiber_lco;
- break;
- default:
- media_type = ixgbe_media_type_unknown;
- break;
- }
-out:
- return media_type;
-}
-
-/**
- * ixgbe_start_mac_link_82599 - Setup MAC link settings
- * @hw: pointer to hardware structure
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Configures link settings based on values in the ixgbe_hw struct.
- * Restarts the link. Performs autonegotiation if needed.
- **/
-static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
- bool autoneg_wait_to_complete)
-{
- u32 autoc_reg;
- u32 links_reg;
- u32 i;
- s32 status = 0;
-
- /* Restart link */
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- /* Only poll for autoneg to complete if specified to do so */
- if (autoneg_wait_to_complete) {
- if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
- IXGBE_AUTOC_LMS_KX4_KX_KR ||
- (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
- IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
- (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
- IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
- links_reg = 0; /* Just in case Autoneg time = 0 */
- for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (links_reg & IXGBE_LINKS_KX_AN_COMP)
- break;
- msleep(100);
- }
- if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
- status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw, "Autoneg did not complete.\n");
- }
- }
- }
-
- /* Add delay to filter out noises during initial link setup */
- msleep(50);
-
- return status;
-}
-
-/**
- * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
- * @hw: pointer to hardware structure
- *
- * The base drivers may require better control over SFP+ module
- * PHY states. This includes selectively shutting down the Tx
- * laser on the PHY, effectively halting physical link.
- **/
-static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
-{
- u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
- /* Disable tx laser; allow 100us to go dark per spec */
- esdp_reg |= IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- udelay(100);
-}
-
-/**
- * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
- * @hw: pointer to hardware structure
- *
- * The base drivers may require better control over SFP+ module
- * PHY states. This includes selectively turning on the Tx
- * laser on the PHY, effectively starting physical link.
- **/
-static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
-{
- u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
- /* Enable tx laser; allow 100ms to light up */
- esdp_reg &= ~IXGBE_ESDP_SDP3;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
- msleep(100);
-}
-
-/**
- * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
- * @hw: pointer to hardware structure
- *
- * When the driver changes the link speeds that it can support,
- * it sets autotry_restart to true to indicate that we need to
- * initiate a new autotry session with the link partner. To do
- * so, we set the speed then disable and re-enable the tx laser, to
- * alert the link partner that it also needs to restart autotry on its
- * end. This is consistent with true clause 37 autoneg, which also
- * involves a loss of signal.
- **/
-static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
-{
- if (hw->mac.autotry_restart) {
- ixgbe_disable_tx_laser_multispeed_fiber(hw);
- ixgbe_enable_tx_laser_multispeed_fiber(hw);
- hw->mac.autotry_restart = false;
- }
-}
-
-/**
- * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
- ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- u32 speedcnt = 0;
- u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
- u32 i = 0;
- bool link_up = false;
- bool negotiation;
-
- /* Mask off requested but non-supported speeds */
- status = hw->mac.ops.get_link_capabilities(hw, &link_speed,
- &negotiation);
- if (status != 0)
- return status;
-
- speed &= link_speed;
-
- /*
- * Try each speed one by one, highest priority first. We do this in
- * software because 10gb fiber doesn't support speed autonegotiation.
- */
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- speedcnt++;
- highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- /* Allow module to change analog characteristics (1G->10G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_10GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
-
- /* Flap the tx laser if it has not already been done */
- hw->mac.ops.flap_tx_laser(hw);
-
- /*
- * Wait for the controller to acquire link. Per IEEE 802.3ap,
- * Section 73.10.2, we may have to wait up to 500ms if KR is
- * attempted. 82599 uses the same timing for 10g SFI.
- */
- for (i = 0; i < 5; i++) {
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
- }
- }
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- speedcnt++;
- if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN)
- highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- /* If we already have link at this speed, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up)
- goto out;
-
- /* Set the module link speed */
- esdp_reg &= ~IXGBE_ESDP_SDP5;
- esdp_reg |= IXGBE_ESDP_SDP5_DIR;
- IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- /* Allow module to change analog characteristics (10G->1G) */
- msleep(40);
-
- status = ixgbe_setup_mac_link_82599(hw,
- IXGBE_LINK_SPEED_1GB_FULL,
- autoneg,
- autoneg_wait_to_complete);
- if (status != 0)
- return status;
-
- /* Flap the tx laser if it has not already been done */
- hw->mac.ops.flap_tx_laser(hw);
-
- /* Wait for the link partner to also set speed */
- msleep(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed, &link_up,
- false);
- if (status != 0)
- return status;
-
- if (link_up)
- goto out;
- }
-
- /*
- * We didn't get link. Configure back to the highest speed we tried,
- * (if there was more than one). We call ourselves back with just the
- * single highest speed that the user requested.
- */
- if (speedcnt > 1)
- status = ixgbe_setup_mac_link_multispeed_fiber(hw,
- highest_link_speed,
- autoneg,
- autoneg_wait_to_complete);
-
-out:
- /* Set autoneg_advertised value based on input link speed */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- return status;
-}
-
-/**
- * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Implements the Intel SmartSpeed algorithm.
- **/
-static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
- ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
- s32 i, j;
- bool link_up = false;
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
-
- /* Set autoneg_advertised value based on input link speed */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_100_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
-
- /*
- * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the
- * autoneg advertisement if link is unable to be established at the
- * highest negotiated rate. This can sometimes happen due to integrity
- * issues with the physical media connection.
- */
-
- /* First, try to get link with full advertisement */
- hw->phy.smart_speed_active = false;
- for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
- autoneg_wait_to_complete);
- if (status != 0)
- goto out;
-
- /*
- * Wait for the controller to acquire link. Per IEEE 802.3ap,
- * Section 73.10.2, we may have to wait up to 500ms if KR is
- * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
- * Table 9 in the AN MAS.
- */
- for (i = 0; i < 5; i++) {
- mdelay(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
- if (status != 0)
- goto out;
-
- if (link_up)
- goto out;
- }
- }
-
- /*
- * We didn't get link. If we advertised KR plus one of KX4/KX
- * (or BX4/BX), then disable KR and try again.
- */
- if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
- ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
- goto out;
-
- /* Turn SmartSpeed on to disable KR support */
- hw->phy.smart_speed_active = true;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
- autoneg_wait_to_complete);
- if (status != 0)
- goto out;
-
- /*
- * Wait for the controller to acquire link. 600ms will allow for
- * the AN link_fail_inhibit_timer as well for multiple cycles of
- * parallel detect, both 10g and 1g. This allows for the maximum
- * connect attempts as defined in the AN MAS table 73-7.
- */
- for (i = 0; i < 6; i++) {
- mdelay(100);
-
- /* If we have link, just jump out */
- status = hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false);
- if (status != 0)
- goto out;
-
- if (link_up)
- goto out;
- }
-
- /* We didn't get link. Turn SmartSpeed back off. */
- hw->phy.smart_speed_active = false;
- status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
- autoneg_wait_to_complete);
-
-out:
- if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
- hw_dbg(hw, "Smartspeed has downgraded the link speed from "
- "the maximum advertised\n");
- return status;
-}
-
-/**
- * ixgbe_setup_mac_link_82599 - Set MAC link speed
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Set the link speed in the AUTOC register and restarts link.
- **/
-static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status = 0;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- u32 start_autoc = autoc;
- u32 orig_autoc = 0;
- u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
- u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
- u32 links_reg;
- u32 i;
- ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
-
- /* Check to see if speed passed in is supported. */
- hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
- if (status != 0)
- goto out;
-
- speed &= link_capabilities;
-
- if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
- status = IXGBE_ERR_LINK_SETUP;
- goto out;
- }
-
- /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
- if (hw->mac.orig_link_settings_stored)
- orig_autoc = hw->mac.orig_autoc;
- else
- orig_autoc = autoc;
-
- if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
- link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
- link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
- /* Set KX4/KX/KR support according to speed requested */
- autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
- autoc |= IXGBE_AUTOC_KX4_SUPP;
- if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
- (hw->phy.smart_speed_active == false))
- autoc |= IXGBE_AUTOC_KR_SUPP;
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- autoc |= IXGBE_AUTOC_KX_SUPP;
- } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
- (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
- link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
- /* Switch from 1G SFI to 10G SFI if requested */
- if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
- (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
- autoc &= ~IXGBE_AUTOC_LMS_MASK;
- autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
- }
- } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
- (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
- /* Switch from 10G SFI to 1G SFI if requested */
- if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
- (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
- autoc &= ~IXGBE_AUTOC_LMS_MASK;
- if (autoneg)
- autoc |= IXGBE_AUTOC_LMS_1G_AN;
- else
- autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
- }
- }
-
- if (autoc != start_autoc) {
- /* Restart link */
- autoc |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
-
- /* Only poll for autoneg to complete if specified to do so */
- if (autoneg_wait_to_complete) {
- if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
- link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
- link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
- links_reg = 0; /*Just in case Autoneg time=0*/
- for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
- links_reg =
- IXGBE_READ_REG(hw, IXGBE_LINKS);
- if (links_reg & IXGBE_LINKS_KX_AN_COMP)
- break;
- msleep(100);
- }
- if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
- status =
- IXGBE_ERR_AUTONEG_NOT_COMPLETE;
- hw_dbg(hw, "Autoneg did not "
- "complete.\n");
- }
- }
- }
-
- /* Add delay to filter out noises during initial link setup */
- msleep(50);
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true if waiting is needed to complete
- *
- * Restarts link on PHY and MAC based on settings passed in.
- **/
-static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
- s32 status;
-
- /* Setup the PHY according to input speed */
- status = hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
- /* Set up MAC */
- ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
-
- return status;
-}
-
-/**
- * ixgbe_reset_hw_82599 - Perform hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by resetting the transmit and receive units, masks
- * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
- * reset.
- **/
-static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u32 ctrl;
- u32 i;
- u32 autoc;
- u32 autoc2;
-
- /* Call adapter stop to disable tx/rx and clear interrupts */
- hw->mac.ops.stop_adapter(hw);
-
- /* PHY ops must be identified and initialized prior to reset */
-
- /* Identify PHY and related function pointers */
- status = hw->phy.ops.init(hw);
-
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto reset_hw_out;
-
- /* Setup SFP module if there is one present. */
- if (hw->phy.sfp_setup_needed) {
- status = hw->mac.ops.setup_sfp(hw);
- hw->phy.sfp_setup_needed = false;
- }
-
- if (status == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto reset_hw_out;
-
- /* Reset PHY */
- if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
- hw->phy.ops.reset(hw);
-
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests before reset
- */
- ixgbe_disable_pcie_master(hw);
-
-mac_reset_top:
- /*
- * Issue global reset to the MAC. This needs to be a SW reset.
- * If link reset is used, it might reset the MAC when mng is using it
- */
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
- IXGBE_WRITE_FLUSH(hw);
-
- /* Poll for reset bit to self-clear indicating reset is complete */
- for (i = 0; i < 10; i++) {
- udelay(1);
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & IXGBE_CTRL_RST))
- break;
- }
- if (ctrl & IXGBE_CTRL_RST) {
- status = IXGBE_ERR_RESET_FAILED;
- hw_dbg(hw, "Reset polling failed to complete.\n");
- }
-
- /*
- * Double resets are required for recovery from certain error
- * conditions. Between resets, it is necessary to stall to allow time
- * for any pending HW events to complete. We use 1usec since that is
- * what is needed for ixgbe_disable_pcie_master(). The second reset
- * then clears out any effects of those events.
- */
- if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
- hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
- udelay(1);
- goto mac_reset_top;
- }
-
- msleep(50);
-
- /*
- * Store the original AUTOC/AUTOC2 values if they have not been
- * stored off yet. Otherwise restore the stored original
- * values since the reset operation sets back to defaults.
- */
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- if (hw->mac.orig_link_settings_stored == false) {
- hw->mac.orig_autoc = autoc;
- hw->mac.orig_autoc2 = autoc2;
- hw->mac.orig_link_settings_stored = true;
- } else {
- if (autoc != hw->mac.orig_autoc)
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
- IXGBE_AUTOC_AN_RESTART));
-
- if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
- (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
- autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
- autoc2 |= (hw->mac.orig_autoc2 &
- IXGBE_AUTOC2_UPPER_MASK);
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
- }
- }
-
- /* Store the permanent mac address */
- hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
-
- /*
- * Store MAC address from RAR0, clear receive address registers, and
- * clear the multicast table. Also reset num_rar_entries to 128,
- * since we modify this value when programming the SAN MAC address.
- */
- hw->mac.num_rar_entries = 128;
- hw->mac.ops.init_rx_addrs(hw);
-
- /* Store the permanent SAN mac address */
- hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
-
- /* Add the SAN MAC address to the RAR only if it's a valid address */
- if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
- hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
- hw->mac.san_addr, 0, IXGBE_RAH_AV);
-
- /* Reserve the last RAR for the SAN MAC address */
- hw->mac.num_rar_entries--;
- }
-
- /* Store the alternative WWNN/WWPN prefix */
- hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
- &hw->mac.wwpn_prefix);
-
-reset_hw_out:
- return status;
-}
-
-/**
- * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
-{
- int i;
- u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
- fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
-
- /*
- * Before starting reinitialization process,
- * FDIRCMD.CMD must be zero.
- */
- for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- IXGBE_FDIRCMD_CMD_MASK))
- break;
- udelay(10);
- }
- if (i >= IXGBE_FDIRCMD_CMD_POLL) {
- hw_dbg(hw, "Flow Director previous command isn't complete, "
- "aborting table re-initialization.\n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
- IXGBE_WRITE_FLUSH(hw);
- /*
- * 82599 adapters flow director init flow cannot be restarted,
- * Workaround 82599 silicon errata by performing the following steps
- * before re-writing the FDIRCTRL control register with the same value.
- * - write 1 to bit 8 of FDIRCMD register &
- * - write 0 to bit 8 of FDIRCMD register
- */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
- (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
- IXGBE_FDIRCMD_CLEARHT));
- IXGBE_WRITE_FLUSH(hw);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
- (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
- ~IXGBE_FDIRCMD_CLEARHT));
- IXGBE_WRITE_FLUSH(hw);
- /*
- * Clear FDIR Hash register to clear any leftover hashes
- * waiting to be programmed.
- */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
- IXGBE_WRITE_FLUSH(hw);
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
- IXGBE_WRITE_FLUSH(hw);
-
- /* Poll init-done after we write FDIRCTRL register */
- for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
- if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
- IXGBE_FDIRCTRL_INIT_DONE)
- break;
- udelay(10);
- }
- if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
- hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
- return IXGBE_ERR_FDIR_REINIT_FAILED;
- }
-
- /* Clear FDIR statistics registers (read to clear) */
- IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
- IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
- IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
- IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
- IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
-
- return 0;
-}
-
-/**
- * ixgbe_set_fdir_rxpba_82599 - Initialize Flow Director Rx packet buffer
- * @hw: pointer to hardware structure
- * @pballoc: which mode to allocate filters with
- **/
-static s32 ixgbe_set_fdir_rxpba_82599(struct ixgbe_hw *hw, const u32 pballoc)
-{
- u32 fdir_pbsize = hw->mac.rx_pb_size << IXGBE_RXPBSIZE_SHIFT;
- u32 current_rxpbsize = 0;
- int i;
-
- /* reserve space for Flow Director filters */
- switch (pballoc) {
- case IXGBE_FDIR_PBALLOC_256K:
- fdir_pbsize -= 256 << IXGBE_RXPBSIZE_SHIFT;
- break;
- case IXGBE_FDIR_PBALLOC_128K:
- fdir_pbsize -= 128 << IXGBE_RXPBSIZE_SHIFT;
- break;
- case IXGBE_FDIR_PBALLOC_64K:
- fdir_pbsize -= 64 << IXGBE_RXPBSIZE_SHIFT;
- break;
- case IXGBE_FDIR_PBALLOC_NONE:
- default:
- return IXGBE_ERR_PARAM;
- }
-
- /* determine current RX packet buffer size */
- for (i = 0; i < 8; i++)
- current_rxpbsize += IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
-
- /* if there is already room for the filters do nothing */
- if (current_rxpbsize <= fdir_pbsize)
- return 0;
-
- if (current_rxpbsize > hw->mac.rx_pb_size) {
- /*
- * if rxpbsize is greater than max then HW max the Rx buffer
- * sizes are unconfigured or misconfigured since HW default is
- * to give the full buffer to each traffic class resulting in
- * the total size being buffer size 8x actual size
- *
- * This assumes no DCB since the RXPBSIZE registers appear to
- * be unconfigured.
- */
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), fdir_pbsize);
- for (i = 1; i < 8; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
- } else {
- /*
- * Since the Rx packet buffer appears to have already been
- * configured we need to shrink each packet buffer by enough
- * to make room for the filters. As such we take each rxpbsize
- * value and multiply it by a fraction representing the size
- * needed over the size we currently have.
- *
- * We need to reduce fdir_pbsize and current_rxpbsize to
- * 1/1024 of their original values in order to avoid
- * overflowing the u32 being used to store rxpbsize.
- */
- fdir_pbsize >>= IXGBE_RXPBSIZE_SHIFT;
- current_rxpbsize >>= IXGBE_RXPBSIZE_SHIFT;
- for (i = 0; i < 8; i++) {
- u32 rxpbsize = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
- rxpbsize *= fdir_pbsize;
- rxpbsize /= current_rxpbsize;
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpbsize);
- }
- }
-
- return 0;
-}
-
-/**
- * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
- * @hw: pointer to hardware structure
- * @fdirctrl: value to write to flow director control register
- **/
-static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
-{
- int i;
-
- /* Prime the keys for hashing */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
-
- /*
- * Poll init-done after we write the register. Estimated times:
- * 10G: PBALLOC = 11b, timing is 60us
- * 1G: PBALLOC = 11b, timing is 600us
- * 100M: PBALLOC = 11b, timing is 6ms
- *
- * Multiple these timings by 4 if under full Rx load
- *
- * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
- * 1 msec per poll time. If we're at line rate and drop to 100M, then
- * this might not finish in our poll time, but we can live with that
- * for now.
- */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
- IXGBE_WRITE_FLUSH(hw);
- for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
- if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
- IXGBE_FDIRCTRL_INIT_DONE)
- break;
- usleep_range(1000, 2000);
- }
-
- if (i >= IXGBE_FDIR_INIT_DONE_POLL)
- hw_dbg(hw, "Flow Director poll time exceeded!\n");
-}
-
-/**
- * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
- * @hw: pointer to hardware structure
- * @fdirctrl: value to write to flow director control register, initially
- * contains just the value of the Rx packet buffer allocation
- **/
-s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
-{
- s32 err;
-
- /* Before enabling Flow Director, verify the Rx Packet Buffer size */
- err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
- if (err)
- return err;
-
- /*
- * Continue setup of fdirctrl register bits:
- * Move the flexible bytes to use the ethertype - shift 6 words
- * Set the maximum length per hash bucket to 0xA filters
- * Send interrupt when 64 filters are left
- */
- fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
- (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
- (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
-
- /* write hashes and fdirctrl register, poll for completion */
- ixgbe_fdir_enable_82599(hw, fdirctrl);
-
- return 0;
-}
-
-/**
- * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
- * @hw: pointer to hardware structure
- * @fdirctrl: value to write to flow director control register, initially
- * contains just the value of the Rx packet buffer allocation
- **/
-s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
-{
- s32 err;
-
- /* Before enabling Flow Director, verify the Rx Packet Buffer size */
- err = ixgbe_set_fdir_rxpba_82599(hw, fdirctrl);
- if (err)
- return err;
-
- /*
- * Continue setup of fdirctrl register bits:
- * Turn perfect match filtering on
- * Report hash in RSS field of Rx wb descriptor
- * Initialize the drop queue
- * Move the flexible bytes to use the ethertype - shift 6 words
- * Set the maximum length per hash bucket to 0xA filters
- * Send interrupt when 64 (0x4 * 16) filters are left
- */
- fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
- IXGBE_FDIRCTRL_REPORT_STATUS |
- (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
- (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
- (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
- (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
-
- /* write hashes and fdirctrl register, poll for completion */
- ixgbe_fdir_enable_82599(hw, fdirctrl);
-
- return 0;
-}
-
-/*
- * These defines allow us to quickly generate all of the necessary instructions
- * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
- * for values 0 through 15
- */
-#define IXGBE_ATR_COMMON_HASH_KEY \
- (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
-#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
-do { \
- u32 n = (_n); \
- if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \
- common_hash ^= lo_hash_dword >> n; \
- else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
- bucket_hash ^= lo_hash_dword >> n; \
- else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \
- sig_hash ^= lo_hash_dword << (16 - n); \
- if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \
- common_hash ^= hi_hash_dword >> n; \
- else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
- bucket_hash ^= hi_hash_dword >> n; \
- else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \
- sig_hash ^= hi_hash_dword << (16 - n); \
-} while (0);
-
-/**
- * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
- * @stream: input bitstream to compute the hash on
- *
- * This function is almost identical to the function above but contains
- * several optomizations such as unwinding all of the loops, letting the
- * compiler work out all of the conditional ifs since the keys are static
- * defines, and computing two keys at once since the hashed dword stream
- * will be the same for both keys.
- **/
-static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
- union ixgbe_atr_hash_dword common)
-{
- u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
- u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
-
- /* record the flow_vm_vlan bits as they are a key part to the hash */
- flow_vm_vlan = ntohl(input.dword);
-
- /* generate common hash dword */
- hi_hash_dword = ntohl(common.dword);
-
- /* low dword is word swapped version of common */
- lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
-
- /* apply flow ID/VM pool/VLAN ID bits to hash words */
- hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
-
- /* Process bits 0 and 16 */
- IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
-
- /*
- * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
- * delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
- */
- lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
-
- /* Process remaining 30 bit of the key */
- IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
- IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
-
- /* combine common_hash result with signature and bucket hashes */
- bucket_hash ^= common_hash;
- bucket_hash &= IXGBE_ATR_HASH_MASK;
-
- sig_hash ^= common_hash << 16;
- sig_hash &= IXGBE_ATR_HASH_MASK << 16;
-
- /* return completed signature hash */
- return sig_hash ^ bucket_hash;
-}
-
-/**
- * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter
- * @hw: pointer to hardware structure
- * @input: unique input dword
- * @common: compressed common input dword
- * @queue: queue index to direct traffic to
- **/
-s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_hash_dword input,
- union ixgbe_atr_hash_dword common,
- u8 queue)
-{
- u64 fdirhashcmd;
- u32 fdircmd;
-
- /*
- * Get the flow_type in order to program FDIRCMD properly
- * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
- */
- switch (input.formatted.flow_type) {
- case IXGBE_ATR_FLOW_TYPE_TCPV4:
- case IXGBE_ATR_FLOW_TYPE_UDPV4:
- case IXGBE_ATR_FLOW_TYPE_SCTPV4:
- case IXGBE_ATR_FLOW_TYPE_TCPV6:
- case IXGBE_ATR_FLOW_TYPE_UDPV6:
- case IXGBE_ATR_FLOW_TYPE_SCTPV6:
- break;
- default:
- hw_dbg(hw, " Error on flow type input\n");
- return IXGBE_ERR_CONFIG;
- }
-
- /* configure FDIRCMD register */
- fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
- IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
- fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
- fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
-
- /*
- * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
- * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH.
- */
- fdirhashcmd = (u64)fdircmd << 32;
- fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
- IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
-
- hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
-
- return 0;
-}
-
-#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
-do { \
- u32 n = (_n); \
- if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \
- bucket_hash ^= lo_hash_dword >> n; \
- if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \
- bucket_hash ^= hi_hash_dword >> n; \
-} while (0);
-
-/**
- * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
- * @atr_input: input bitstream to compute the hash on
- * @input_mask: mask for the input bitstream
- *
- * This function serves two main purposes. First it applys the input_mask
- * to the atr_input resulting in a cleaned up atr_input data stream.
- * Secondly it computes the hash and stores it in the bkt_hash field at
- * the end of the input byte stream. This way it will be available for
- * future use without needing to recompute the hash.
- **/
-void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
- union ixgbe_atr_input *input_mask)
-{
-
- u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
- u32 bucket_hash = 0;
-
- /* Apply masks to input data */
- input->dword_stream[0] &= input_mask->dword_stream[0];
- input->dword_stream[1] &= input_mask->dword_stream[1];
- input->dword_stream[2] &= input_mask->dword_stream[2];
- input->dword_stream[3] &= input_mask->dword_stream[3];
- input->dword_stream[4] &= input_mask->dword_stream[4];
- input->dword_stream[5] &= input_mask->dword_stream[5];
- input->dword_stream[6] &= input_mask->dword_stream[6];
- input->dword_stream[7] &= input_mask->dword_stream[7];
- input->dword_stream[8] &= input_mask->dword_stream[8];
- input->dword_stream[9] &= input_mask->dword_stream[9];
- input->dword_stream[10] &= input_mask->dword_stream[10];
-
- /* record the flow_vm_vlan bits as they are a key part to the hash */
- flow_vm_vlan = ntohl(input->dword_stream[0]);
-
- /* generate common hash dword */
- hi_hash_dword = ntohl(input->dword_stream[1] ^
- input->dword_stream[2] ^
- input->dword_stream[3] ^
- input->dword_stream[4] ^
- input->dword_stream[5] ^
- input->dword_stream[6] ^
- input->dword_stream[7] ^
- input->dword_stream[8] ^
- input->dword_stream[9] ^
- input->dword_stream[10]);
-
- /* low dword is word swapped version of common */
- lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
-
- /* apply flow ID/VM pool/VLAN ID bits to hash words */
- hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
-
- /* Process bits 0 and 16 */
- IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
-
- /*
- * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
- * delay this because bit 0 of the stream should not be processed
- * so we do not add the vlan until after bit 0 was processed
- */
- lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
-
- /* Process remaining 30 bit of the key */
- IXGBE_COMPUTE_BKT_HASH_ITERATION(1);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(2);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(3);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(4);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(5);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(6);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(7);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(8);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(9);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(10);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(11);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(12);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(13);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(14);
- IXGBE_COMPUTE_BKT_HASH_ITERATION(15);
-
- /*
- * Limit hash to 13 bits since max bucket count is 8K.
- * Store result at the end of the input stream.
- */
- input->formatted.bkt_hash = bucket_hash & 0x1FFF;
-}
-
-/**
- * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
- * @input_mask: mask to be bit swapped
- *
- * The source and destination port masks for flow director are bit swapped
- * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to
- * generate a correctly swapped value we need to bit swap the mask and that
- * is what is accomplished by this function.
- **/
-static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
-{
- u32 mask = ntohs(input_mask->formatted.dst_port);
- mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
- mask |= ntohs(input_mask->formatted.src_port);
- mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
- mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
- mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
- return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
-}
-
-/*
- * These two macros are meant to address the fact that we have registers
- * that are either all or in part big-endian. As a result on big-endian
- * systems we will end up byte swapping the value to little-endian before
- * it is byte swapped again and written to the hardware in the original
- * big-endian format.
- */
-#define IXGBE_STORE_AS_BE32(_value) \
- (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
- (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
-
-#define IXGBE_WRITE_REG_BE32(a, reg, value) \
- IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
-
-#define IXGBE_STORE_AS_BE16(_value) \
- ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8))
-
-s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input_mask)
-{
- /* mask IPv6 since it is currently not supported */
- u32 fdirm = IXGBE_FDIRM_DIPv6;
- u32 fdirtcpm;
-
- /*
- * Program the relevant mask registers. If src/dst_port or src/dst_addr
- * are zero, then assume a full mask for that field. Also assume that
- * a VLAN of 0 is unspecified, so mask that out as well. L4type
- * cannot be masked out in this implementation.
- *
- * This also assumes IPv4 only. IPv6 masking isn't supported at this
- * point in time.
- */
-
- /* verify bucket hash is cleared on hash generation */
- if (input_mask->formatted.bkt_hash)
- hw_dbg(hw, " bucket hash should always be 0 in mask\n");
-
- /* Program FDIRM and verify partial masks */
- switch (input_mask->formatted.vm_pool & 0x7F) {
- case 0x0:
- fdirm |= IXGBE_FDIRM_POOL;
- case 0x7F:
- break;
- default:
- hw_dbg(hw, " Error on vm pool mask\n");
- return IXGBE_ERR_CONFIG;
- }
-
- switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
- case 0x0:
- fdirm |= IXGBE_FDIRM_L4P;
- if (input_mask->formatted.dst_port ||
- input_mask->formatted.src_port) {
- hw_dbg(hw, " Error on src/dst port mask\n");
- return IXGBE_ERR_CONFIG;
- }
- case IXGBE_ATR_L4TYPE_MASK:
- break;
- default:
- hw_dbg(hw, " Error on flow type mask\n");
- return IXGBE_ERR_CONFIG;
- }
-
- switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
- case 0x0000:
- /* mask VLAN ID, fall through to mask VLAN priority */
- fdirm |= IXGBE_FDIRM_VLANID;
- case 0x0FFF:
- /* mask VLAN priority */
- fdirm |= IXGBE_FDIRM_VLANP;
- break;
- case 0xE000:
- /* mask VLAN ID only, fall through */
- fdirm |= IXGBE_FDIRM_VLANID;
- case 0xEFFF:
- /* no VLAN fields masked */
- break;
- default:
- hw_dbg(hw, " Error on VLAN mask\n");
- return IXGBE_ERR_CONFIG;
- }
-
- switch (input_mask->formatted.flex_bytes & 0xFFFF) {
- case 0x0000:
- /* Mask Flex Bytes, fall through */
- fdirm |= IXGBE_FDIRM_FLEX;
- case 0xFFFF:
- break;
- default:
- hw_dbg(hw, " Error on flexible byte mask\n");
- return IXGBE_ERR_CONFIG;
- }
-
- /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
-
- /* store the TCP/UDP port masks, bit reversed from port layout */
- fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
-
- /* write both the same so that UDP and TCP use the same mask */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
-
- /* store source and destination IP masks (big-enian) */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
- ~input_mask->formatted.src_ip[0]);
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
- ~input_mask->formatted.dst_ip[0]);
-
- return 0;
-}
-
-s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input,
- u16 soft_id, u8 queue)
-{
- u32 fdirport, fdirvlan, fdirhash, fdircmd;
-
- /* currently IPv6 is not supported, must be programmed with 0 */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
- input->formatted.src_ip[0]);
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
- input->formatted.src_ip[1]);
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
- input->formatted.src_ip[2]);
-
- /* record the source address (big-endian) */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
-
- /* record the first 32 bits of the destination address (big-endian) */
- IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
-
- /* record source and destination port (little-endian)*/
- fdirport = ntohs(input->formatted.dst_port);
- fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
- fdirport |= ntohs(input->formatted.src_port);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
-
- /* record vlan (little-endian) and flex_bytes(big-endian) */
- fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
- fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
- fdirvlan |= ntohs(input->formatted.vlan_id);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
-
- /* configure FDIRHASH register */
- fdirhash = input->formatted.bkt_hash;
- fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
-
- /*
- * flush all previous writes to make certain registers are
- * programmed prior to issuing the command
- */
- IXGBE_WRITE_FLUSH(hw);
-
- /* configure FDIRCMD register */
- fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
- IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
- if (queue == IXGBE_FDIR_DROP_QUEUE)
- fdircmd |= IXGBE_FDIRCMD_DROP;
- fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
- fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
- fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
-
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
-
- return 0;
-}
-
-s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
- union ixgbe_atr_input *input,
- u16 soft_id)
-{
- u32 fdirhash;
- u32 fdircmd = 0;
- u32 retry_count;
- s32 err = 0;
-
- /* configure FDIRHASH register */
- fdirhash = input->formatted.bkt_hash;
- fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
-
- /* flush hash to HW */
- IXGBE_WRITE_FLUSH(hw);
-
- /* Query if filter is present */
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
-
- for (retry_count = 10; retry_count; retry_count--) {
- /* allow 10us for query to process */
- udelay(10);
- /* verify query completed successfully */
- fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
- if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK))
- break;
- }
-
- if (!retry_count)
- err = IXGBE_ERR_FDIR_REINIT_FAILED;
-
- /* if filter exists in hardware then remove it */
- if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
- IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
- IXGBE_WRITE_FLUSH(hw);
- IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
- IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
- }
-
- return err;
-}
-
-/**
- * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
- * @hw: pointer to hardware structure
- * @reg: analog register to read
- * @val: read value
- *
- * Performs read operation to Omer analog register specified.
- **/
-static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
-{
- u32 core_ctl;
-
- IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
- (reg << 8));
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
- core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
- *val = (u8)core_ctl;
-
- return 0;
-}
-
-/**
- * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
- * @hw: pointer to hardware structure
- * @reg: atlas register to write
- * @val: value to write
- *
- * Performs write operation to Omer analog register specified.
- **/
-static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
-{
- u32 core_ctl;
-
- core_ctl = (reg << 8) | val;
- IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
- IXGBE_WRITE_FLUSH(hw);
- udelay(10);
-
- return 0;
-}
-
-/**
- * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware using the generic start_hw function
- * and the generation start_hw function.
- * Then performs revision-specific operations, if any.
- **/
-static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
-{
- s32 ret_val = 0;
-
- ret_val = ixgbe_start_hw_generic(hw);
- if (ret_val != 0)
- goto out;
-
- ret_val = ixgbe_start_hw_gen2(hw);
- if (ret_val != 0)
- goto out;
-
- /* We need to run link autotry after the driver loads */
- hw->mac.autotry_restart = true;
- hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE;
-
- if (ret_val == 0)
- ret_val = ixgbe_verify_fw_version_82599(hw);
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_identify_phy_82599 - Get physical layer module
- * @hw: pointer to hardware structure
- *
- * Determines the physical layer module found on the current adapter.
- * If PHY already detected, maintains current PHY type in hw struct,
- * otherwise executes the PHY detection routine.
- **/
-static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
-
- /* Detect PHY if not unknown - returns success if already detected. */
- status = ixgbe_identify_phy_generic(hw);
- if (status != 0) {
- /* 82599 10GBASE-T requires an external PHY */
- if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
- goto out;
- else
- status = ixgbe_identify_sfp_module_generic(hw);
- }
-
- /* Set PHY type none if no PHY detected */
- if (hw->phy.type == ixgbe_phy_unknown) {
- hw->phy.type = ixgbe_phy_none;
- status = 0;
- }
-
- /* Return error if SFP module has been detected but is not supported */
- if (hw->phy.type == ixgbe_phy_sfp_unsupported)
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
-
-out:
- return status;
-}
-
-/**
- * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
- u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK;
- u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
- u16 ext_ability = 0;
- u8 comp_codes_10g = 0;
- u8 comp_codes_1g = 0;
-
- hw->phy.ops.identify(hw);
-
- switch (hw->phy.type) {
- case ixgbe_phy_tn:
- case ixgbe_phy_aq:
- case ixgbe_phy_cu_unknown:
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
- &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
- goto out;
- default:
- break;
- }
-
- switch (autoc & IXGBE_AUTOC_LMS_MASK) {
- case IXGBE_AUTOC_LMS_1G_AN:
- case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
- if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) {
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX |
- IXGBE_PHYSICAL_LAYER_1000BASE_BX;
- goto out;
- } else
- /* SFI mode so read SFP module */
- goto sfp_check;
- break;
- case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
- if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
- else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI;
- goto out;
- break;
- case IXGBE_AUTOC_LMS_10G_SERIAL:
- if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) {
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR;
- goto out;
- } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)
- goto sfp_check;
- break;
- case IXGBE_AUTOC_LMS_KX4_KX_KR:
- case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
- if (autoc & IXGBE_AUTOC_KX_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX;
- if (autoc & IXGBE_AUTOC_KX4_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4;
- if (autoc & IXGBE_AUTOC_KR_SUPP)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR;
- goto out;
- break;
- default:
- goto out;
- break;
- }
-
-sfp_check:
- /* SFP check must be done last since DA modules are sometimes used to
- * test KR mode - we need to id KR mode correctly before SFP module.
- * Call identify_sfp because the pluggable module may have changed */
- hw->phy.ops.identify_sfp(hw);
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- goto out;
-
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
- break;
- case ixgbe_phy_sfp_ftl_active:
- case ixgbe_phy_sfp_active_unknown:
- physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
- break;
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
- hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
- if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
- else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
- physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
- break;
- default:
- break;
- }
-
-out:
- return physical_layer;
-}
-
-/**
- * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
- * @hw: pointer to hardware structure
- * @regval: register value to write to RXCTRL
- *
- * Enables the Rx DMA unit for 82599
- **/
-static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
-{
-#define IXGBE_MAX_SECRX_POLL 30
- int i;
- int secrxreg;
-
- /*
- * Workaround for 82599 silicon errata when enabling the Rx datapath.
- * If traffic is incoming before we enable the Rx unit, it could hang
- * the Rx DMA unit. Therefore, make sure the security engine is
- * completely disabled prior to enabling the Rx unit.
- */
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg |= IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) {
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT);
- if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY)
- break;
- else
- /* Use interrupt-safe sleep just in case */
- udelay(10);
- }
-
- /* For informational purposes only */
- if (i >= IXGBE_MAX_SECRX_POLL)
- hw_dbg(hw, "Rx unit being enabled before security "
- "path fully disabled. Continuing with init.\n");
-
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
- secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL);
- secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_verify_fw_version_82599 - verify fw version for 82599
- * @hw: pointer to hardware structure
- *
- * Verifies that installed the firmware version is 0.6 or higher
- * for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
- *
- * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or
- * if the FW version is not supported.
- **/
-static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_EEPROM_VERSION;
- u16 fw_offset, fw_ptp_cfg_offset;
- u16 fw_version = 0;
-
- /* firmware check is only necessary for SFI devices */
- if (hw->phy.media_type != ixgbe_media_type_fiber) {
- status = 0;
- goto fw_version_out;
- }
-
- /* get the offset to the Firmware Module block */
- hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
-
- if ((fw_offset == 0) || (fw_offset == 0xFFFF))
- goto fw_version_out;
-
- /* get the offset to the Pass Through Patch Configuration block */
- hw->eeprom.ops.read(hw, (fw_offset +
- IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR),
- &fw_ptp_cfg_offset);
-
- if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF))
- goto fw_version_out;
-
- /* get the firmware version */
- hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset +
- IXGBE_FW_PATCH_VERSION_4),
- &fw_version);
-
- if (fw_version > 0x5)
- status = 0;
-
-fw_version_out:
- return status;
-}
-
-/**
- * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
- * @hw: pointer to hardware structure
- *
- * Returns true if the LESM FW module is present and enabled. Otherwise
- * returns false. Smart Speed must be disabled if LESM FW module is enabled.
- **/
-static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
-{
- bool lesm_enabled = false;
- u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
- s32 status;
-
- /* get the offset to the Firmware Module block */
- status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
-
- if ((status != 0) ||
- (fw_offset == 0) || (fw_offset == 0xFFFF))
- goto out;
-
- /* get the offset to the LESM Parameters block */
- status = hw->eeprom.ops.read(hw, (fw_offset +
- IXGBE_FW_LESM_PARAMETERS_PTR),
- &fw_lesm_param_offset);
-
- if ((status != 0) ||
- (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF))
- goto out;
-
- /* get the lesm state word */
- status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
- IXGBE_FW_LESM_STATE_1),
- &fw_lesm_state);
-
- if ((status == 0) &&
- (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
- lesm_enabled = true;
-
-out:
- return lesm_enabled;
-}
-
-/**
- * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
- * fastest available method
- *
- * @hw: pointer to hardware structure
- * @offset: offset of word in EEPROM to read
- * @words: number of words
- * @data: word(s) read from the EEPROM
- *
- * Retrieves 16 bit word(s) read from EEPROM
- **/
-static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
- s32 ret_val = IXGBE_ERR_CONFIG;
-
- /*
- * If EEPROM is detected and can be addressed using 14 bits,
- * use EERD otherwise use bit bang
- */
- if ((eeprom->type == ixgbe_eeprom_spi) &&
- (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR))
- ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words,
- data);
- else
- ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset,
- words,
- data);
-
- return ret_val;
-}
-
-/**
- * ixgbe_read_eeprom_82599 - Read EEPROM word using
- * fastest available method
- *
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM
- **/
-static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
- u16 offset, u16 *data)
-{
- struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
- s32 ret_val = IXGBE_ERR_CONFIG;
-
- /*
- * If EEPROM is detected and can be addressed using 14 bits,
- * use EERD otherwise use bit bang
- */
- if ((eeprom->type == ixgbe_eeprom_spi) &&
- (offset <= IXGBE_EERD_MAX_ADDR))
- ret_val = ixgbe_read_eerd_generic(hw, offset, data);
- else
- ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
-
- return ret_val;
-}
-
-static struct ixgbe_mac_operations mac_ops_82599 = {
- .init_hw = &ixgbe_init_hw_generic,
- .reset_hw = &ixgbe_reset_hw_82599,
- .start_hw = &ixgbe_start_hw_82599,
- .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
- .get_media_type = &ixgbe_get_media_type_82599,
- .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599,
- .enable_rx_dma = &ixgbe_enable_rx_dma_82599,
- .get_mac_addr = &ixgbe_get_mac_addr_generic,
- .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
- .get_device_caps = &ixgbe_get_device_caps_generic,
- .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
- .stop_adapter = &ixgbe_stop_adapter_generic,
- .get_bus_info = &ixgbe_get_bus_info_generic,
- .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
- .read_analog_reg8 = &ixgbe_read_analog_reg8_82599,
- .write_analog_reg8 = &ixgbe_write_analog_reg8_82599,
- .setup_link = &ixgbe_setup_mac_link_82599,
- .set_rxpba = &ixgbe_set_rxpba_generic,
- .check_link = &ixgbe_check_mac_link_generic,
- .get_link_capabilities = &ixgbe_get_link_capabilities_82599,
- .led_on = &ixgbe_led_on_generic,
- .led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_generic,
- .blink_led_stop = &ixgbe_blink_led_stop_generic,
- .set_rar = &ixgbe_set_rar_generic,
- .clear_rar = &ixgbe_clear_rar_generic,
- .set_vmdq = &ixgbe_set_vmdq_generic,
- .clear_vmdq = &ixgbe_clear_vmdq_generic,
- .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
- .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
- .enable_mc = &ixgbe_enable_mc_generic,
- .disable_mc = &ixgbe_disable_mc_generic,
- .clear_vfta = &ixgbe_clear_vfta_generic,
- .set_vfta = &ixgbe_set_vfta_generic,
- .fc_enable = &ixgbe_fc_enable_generic,
- .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
- .init_uta_tables = &ixgbe_init_uta_tables_generic,
- .setup_sfp = &ixgbe_setup_sfp_modules_82599,
- .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
- .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
- .acquire_swfw_sync = &ixgbe_acquire_swfw_sync,
- .release_swfw_sync = &ixgbe_release_swfw_sync,
-
-};
-
-static struct ixgbe_eeprom_operations eeprom_ops_82599 = {
- .init_params = &ixgbe_init_eeprom_params_generic,
- .read = &ixgbe_read_eeprom_82599,
- .read_buffer = &ixgbe_read_eeprom_buffer_82599,
- .write = &ixgbe_write_eeprom_generic,
- .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic,
- .calc_checksum = &ixgbe_calc_eeprom_checksum_generic,
- .validate_checksum = &ixgbe_validate_eeprom_checksum_generic,
- .update_checksum = &ixgbe_update_eeprom_checksum_generic,
-};
-
-static struct ixgbe_phy_operations phy_ops_82599 = {
- .identify = &ixgbe_identify_phy_82599,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
- .init = &ixgbe_init_phy_ops_82599,
- .reset = &ixgbe_reset_phy_generic,
- .read_reg = &ixgbe_read_phy_reg_generic,
- .write_reg = &ixgbe_write_phy_reg_generic,
- .setup_link = &ixgbe_setup_phy_link_generic,
- .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
- .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
- .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
- .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
- .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
- .check_overtemp = &ixgbe_tn_check_overtemp,
-};
-
-struct ixgbe_info ixgbe_82599_info = {
- .mac = ixgbe_mac_82599EB,
- .get_invariants = &ixgbe_get_invariants_82599,
- .mac_ops = &mac_ops_82599,
- .eeprom_ops = &eeprom_ops_82599,
- .phy_ops = &phy_ops_82599,
- .mbx_ops = &mbx_ops_generic,
-};
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/netdevice.h>
-
-#include "ixgbe.h"
-#include "ixgbe_common.h"
-#include "ixgbe_phy.h"
-
-static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
-static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
-static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
-static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
-static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
-static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
- u16 count);
-static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
-static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
-static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
-static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
-
-static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw);
-static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw);
-static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw);
-static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw);
-static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
- u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm);
-static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
-static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg);
-static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
- u16 offset);
-
-/**
- * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware by filling the bus info structure and media type, clears
- * all on chip counters, initializes receive address registers, multicast
- * table, VLAN filter table, calls routine to set up link and flow control
- * settings, and leaves transmit and receive units disabled and uninitialized
- **/
-s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
-{
- u32 ctrl_ext;
-
- /* Set the media type */
- hw->phy.media_type = hw->mac.ops.get_media_type(hw);
-
- /* Identify the PHY */
- hw->phy.ops.identify(hw);
-
- /* Clear the VLAN filter table */
- hw->mac.ops.clear_vfta(hw);
-
- /* Clear statistics registers */
- hw->mac.ops.clear_hw_cntrs(hw);
-
- /* Set No Snoop Disable */
- ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
- ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
- IXGBE_WRITE_FLUSH(hw);
-
- /* Setup flow control */
- ixgbe_setup_fc(hw, 0);
-
- /* Clear adapter stopped flag */
- hw->adapter_stopped = false;
-
- return 0;
-}
-
-/**
- * ixgbe_start_hw_gen2 - Init sequence for common device family
- * @hw: pointer to hw structure
- *
- * Performs the init sequence common to the second generation
- * of 10 GbE devices.
- * Devices in the second generation:
- * 82599
- * X540
- **/
-s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw)
-{
- u32 i;
- u32 regval;
-
- /* Clear the rate limiters */
- for (i = 0; i < hw->mac.max_tx_queues; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
- IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0);
- }
- IXGBE_WRITE_FLUSH(hw);
-
- /* Disable relaxed ordering */
- for (i = 0; i < hw->mac.max_tx_queues; i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i));
- regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval);
- }
-
- for (i = 0; i < hw->mac.max_rx_queues; i++) {
- regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN |
- IXGBE_DCA_RXCTRL_DESC_HSRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_init_hw_generic - Generic hardware initialization
- * @hw: pointer to hardware structure
- *
- * Initialize the hardware by resetting the hardware, filling the bus info
- * structure and media type, clears all on chip counters, initializes receive
- * address registers, multicast table, VLAN filter table, calls routine to set
- * up link and flow control settings, and leaves transmit and receive units
- * disabled and uninitialized
- **/
-s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
-{
- s32 status;
-
- /* Reset the hardware */
- status = hw->mac.ops.reset_hw(hw);
-
- if (status == 0) {
- /* Start the HW */
- status = hw->mac.ops.start_hw(hw);
- }
-
- return status;
-}
-
-/**
- * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
- * @hw: pointer to hardware structure
- *
- * Clears all hardware statistics counters by reading them from the hardware
- * Statistics counters are clear on read.
- **/
-s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
-{
- u16 i = 0;
-
- IXGBE_READ_REG(hw, IXGBE_CRCERRS);
- IXGBE_READ_REG(hw, IXGBE_ILLERRC);
- IXGBE_READ_REG(hw, IXGBE_ERRBC);
- IXGBE_READ_REG(hw, IXGBE_MSPDC);
- for (i = 0; i < 8; i++)
- IXGBE_READ_REG(hw, IXGBE_MPC(i));
-
- IXGBE_READ_REG(hw, IXGBE_MLFC);
- IXGBE_READ_REG(hw, IXGBE_MRFC);
- IXGBE_READ_REG(hw, IXGBE_RLEC);
- IXGBE_READ_REG(hw, IXGBE_LXONTXC);
- IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
- if (hw->mac.type >= ixgbe_mac_82599EB) {
- IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
- IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
- } else {
- IXGBE_READ_REG(hw, IXGBE_LXONRXC);
- IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
- }
-
- for (i = 0; i < 8; i++) {
- IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
- IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
- if (hw->mac.type >= ixgbe_mac_82599EB) {
- IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
- IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
- } else {
- IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
- IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
- }
- }
- if (hw->mac.type >= ixgbe_mac_82599EB)
- for (i = 0; i < 8; i++)
- IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i));
- IXGBE_READ_REG(hw, IXGBE_PRC64);
- IXGBE_READ_REG(hw, IXGBE_PRC127);
- IXGBE_READ_REG(hw, IXGBE_PRC255);
- IXGBE_READ_REG(hw, IXGBE_PRC511);
- IXGBE_READ_REG(hw, IXGBE_PRC1023);
- IXGBE_READ_REG(hw, IXGBE_PRC1522);
- IXGBE_READ_REG(hw, IXGBE_GPRC);
- IXGBE_READ_REG(hw, IXGBE_BPRC);
- IXGBE_READ_REG(hw, IXGBE_MPRC);
- IXGBE_READ_REG(hw, IXGBE_GPTC);
- IXGBE_READ_REG(hw, IXGBE_GORCL);
- IXGBE_READ_REG(hw, IXGBE_GORCH);
- IXGBE_READ_REG(hw, IXGBE_GOTCL);
- IXGBE_READ_REG(hw, IXGBE_GOTCH);
- for (i = 0; i < 8; i++)
- IXGBE_READ_REG(hw, IXGBE_RNBC(i));
- IXGBE_READ_REG(hw, IXGBE_RUC);
- IXGBE_READ_REG(hw, IXGBE_RFC);
- IXGBE_READ_REG(hw, IXGBE_ROC);
- IXGBE_READ_REG(hw, IXGBE_RJC);
- IXGBE_READ_REG(hw, IXGBE_MNGPRC);
- IXGBE_READ_REG(hw, IXGBE_MNGPDC);
- IXGBE_READ_REG(hw, IXGBE_MNGPTC);
- IXGBE_READ_REG(hw, IXGBE_TORL);
- IXGBE_READ_REG(hw, IXGBE_TORH);
- IXGBE_READ_REG(hw, IXGBE_TPR);
- IXGBE_READ_REG(hw, IXGBE_TPT);
- IXGBE_READ_REG(hw, IXGBE_PTC64);
- IXGBE_READ_REG(hw, IXGBE_PTC127);
- IXGBE_READ_REG(hw, IXGBE_PTC255);
- IXGBE_READ_REG(hw, IXGBE_PTC511);
- IXGBE_READ_REG(hw, IXGBE_PTC1023);
- IXGBE_READ_REG(hw, IXGBE_PTC1522);
- IXGBE_READ_REG(hw, IXGBE_MPTC);
- IXGBE_READ_REG(hw, IXGBE_BPTC);
- for (i = 0; i < 16; i++) {
- IXGBE_READ_REG(hw, IXGBE_QPRC(i));
- IXGBE_READ_REG(hw, IXGBE_QPTC(i));
- if (hw->mac.type >= ixgbe_mac_82599EB) {
- IXGBE_READ_REG(hw, IXGBE_QBRC_L(i));
- IXGBE_READ_REG(hw, IXGBE_QBRC_H(i));
- IXGBE_READ_REG(hw, IXGBE_QBTC_L(i));
- IXGBE_READ_REG(hw, IXGBE_QBTC_H(i));
- IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
- } else {
- IXGBE_READ_REG(hw, IXGBE_QBRC(i));
- IXGBE_READ_REG(hw, IXGBE_QBTC(i));
- }
- }
-
- if (hw->mac.type == ixgbe_mac_X540) {
- if (hw->phy.id == 0)
- hw->phy.ops.identify(hw);
- hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i);
- hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i);
- hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i);
- hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_read_pba_string_generic - Reads part number string from EEPROM
- * @hw: pointer to hardware structure
- * @pba_num: stores the part number string from the EEPROM
- * @pba_num_size: part number string buffer length
- *
- * Reads the part number string from the EEPROM.
- **/
-s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
- u32 pba_num_size)
-{
- s32 ret_val;
- u16 data;
- u16 pba_ptr;
- u16 offset;
- u16 length;
-
- if (pba_num == NULL) {
- hw_dbg(hw, "PBA string buffer was null\n");
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
-
- ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
-
- /*
- * if data is not ptr guard the PBA must be in legacy format which
- * means pba_ptr is actually our second data word for the PBA number
- * and we can decode it into an ascii string
- */
- if (data != IXGBE_PBANUM_PTR_GUARD) {
- hw_dbg(hw, "NVM PBA number is not stored as string\n");
-
- /* we will need 11 characters to store the PBA */
- if (pba_num_size < 11) {
- hw_dbg(hw, "PBA string buffer too small\n");
- return IXGBE_ERR_NO_SPACE;
- }
-
- /* extract hex string from data and pba_ptr */
- pba_num[0] = (data >> 12) & 0xF;
- pba_num[1] = (data >> 8) & 0xF;
- pba_num[2] = (data >> 4) & 0xF;
- pba_num[3] = data & 0xF;
- pba_num[4] = (pba_ptr >> 12) & 0xF;
- pba_num[5] = (pba_ptr >> 8) & 0xF;
- pba_num[6] = '-';
- pba_num[7] = 0;
- pba_num[8] = (pba_ptr >> 4) & 0xF;
- pba_num[9] = pba_ptr & 0xF;
-
- /* put a null character on the end of our string */
- pba_num[10] = '\0';
-
- /* switch all the data but the '-' to hex char */
- for (offset = 0; offset < 10; offset++) {
- if (pba_num[offset] < 0xA)
- pba_num[offset] += '0';
- else if (pba_num[offset] < 0x10)
- pba_num[offset] += 'A' - 0xA;
- }
-
- return 0;
- }
-
- ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
-
- if (length == 0xFFFF || length == 0) {
- hw_dbg(hw, "NVM PBA number section invalid length\n");
- return IXGBE_ERR_PBA_SECTION;
- }
-
- /* check if pba_num buffer is big enough */
- if (pba_num_size < (((u32)length * 2) - 1)) {
- hw_dbg(hw, "PBA string buffer too small\n");
- return IXGBE_ERR_NO_SPACE;
- }
-
- /* trim pba length from start of string */
- pba_ptr++;
- length--;
-
- for (offset = 0; offset < length; offset++) {
- ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data);
- if (ret_val) {
- hw_dbg(hw, "NVM Read Error\n");
- return ret_val;
- }
- pba_num[offset * 2] = (u8)(data >> 8);
- pba_num[(offset * 2) + 1] = (u8)(data & 0xFF);
- }
- pba_num[offset * 2] = '\0';
-
- return 0;
-}
-
-/**
- * ixgbe_get_mac_addr_generic - Generic get MAC address
- * @hw: pointer to hardware structure
- * @mac_addr: Adapter MAC address
- *
- * Reads the adapter's MAC address from first Receive Address Register (RAR0)
- * A reset of the adapter must be performed prior to calling this function
- * in order for the MAC address to have been loaded from the EEPROM into RAR0
- **/
-s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
-{
- u32 rar_high;
- u32 rar_low;
- u16 i;
-
- rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
- rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
-
- for (i = 0; i < 4; i++)
- mac_addr[i] = (u8)(rar_low >> (i*8));
-
- for (i = 0; i < 2; i++)
- mac_addr[i+4] = (u8)(rar_high >> (i*8));
-
- return 0;
-}
-
-/**
- * ixgbe_get_bus_info_generic - Generic set PCI bus info
- * @hw: pointer to hardware structure
- *
- * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
- **/
-s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- struct ixgbe_mac_info *mac = &hw->mac;
- u16 link_status;
-
- hw->bus.type = ixgbe_bus_type_pci_express;
-
- /* Get the negotiated link width and speed from PCI config space */
- pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS,
- &link_status);
-
- switch (link_status & IXGBE_PCI_LINK_WIDTH) {
- case IXGBE_PCI_LINK_WIDTH_1:
- hw->bus.width = ixgbe_bus_width_pcie_x1;
- break;
- case IXGBE_PCI_LINK_WIDTH_2:
- hw->bus.width = ixgbe_bus_width_pcie_x2;
- break;
- case IXGBE_PCI_LINK_WIDTH_4:
- hw->bus.width = ixgbe_bus_width_pcie_x4;
- break;
- case IXGBE_PCI_LINK_WIDTH_8:
- hw->bus.width = ixgbe_bus_width_pcie_x8;
- break;
- default:
- hw->bus.width = ixgbe_bus_width_unknown;
- break;
- }
-
- switch (link_status & IXGBE_PCI_LINK_SPEED) {
- case IXGBE_PCI_LINK_SPEED_2500:
- hw->bus.speed = ixgbe_bus_speed_2500;
- break;
- case IXGBE_PCI_LINK_SPEED_5000:
- hw->bus.speed = ixgbe_bus_speed_5000;
- break;
- default:
- hw->bus.speed = ixgbe_bus_speed_unknown;
- break;
- }
-
- mac->ops.set_lan_id(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices
- * @hw: pointer to the HW structure
- *
- * Determines the LAN function id by reading memory-mapped registers
- * and swaps the port value if requested.
- **/
-void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw)
-{
- struct ixgbe_bus_info *bus = &hw->bus;
- u32 reg;
-
- reg = IXGBE_READ_REG(hw, IXGBE_STATUS);
- bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT;
- bus->lan_id = bus->func;
-
- /* check for a port swap */
- reg = IXGBE_READ_REG(hw, IXGBE_FACTPS);
- if (reg & IXGBE_FACTPS_LFS)
- bus->func ^= 0x1;
-}
-
-/**
- * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units
- * @hw: pointer to hardware structure
- *
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
- **/
-s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
-{
- u32 number_of_queues;
- u32 reg_val;
- u16 i;
-
- /*
- * Set the adapter_stopped flag so other driver functions stop touching
- * the hardware
- */
- hw->adapter_stopped = true;
-
- /* Disable the receive unit */
- reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- reg_val &= ~(IXGBE_RXCTRL_RXEN);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
- IXGBE_WRITE_FLUSH(hw);
- usleep_range(2000, 4000);
-
- /* Clear interrupt mask to stop from interrupts being generated */
- IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
-
- /* Clear any pending interrupts */
- IXGBE_READ_REG(hw, IXGBE_EICR);
-
- /* Disable the transmit unit. Each queue must be disabled. */
- number_of_queues = hw->mac.max_tx_queues;
- for (i = 0; i < number_of_queues; i++) {
- reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
- if (reg_val & IXGBE_TXDCTL_ENABLE) {
- reg_val &= ~IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val);
- }
- }
-
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests
- */
- ixgbe_disable_pcie_master(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_led_on_generic - Turns on the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @index: led number to turn on
- **/
-s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
-{
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- /* To turn on the LED, set mode to ON. */
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_led_off_generic - Turns off the software controllable LEDs.
- * @hw: pointer to hardware structure
- * @index: led number to turn off
- **/
-s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
-{
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- /* To turn off the LED, set mode to OFF. */
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_init_eeprom_params_generic - Initialize EEPROM params
- * @hw: pointer to hardware structure
- *
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
- **/
-s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
-{
- struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
- u32 eec;
- u16 eeprom_size;
-
- if (eeprom->type == ixgbe_eeprom_uninitialized) {
- eeprom->type = ixgbe_eeprom_none;
- /* Set default semaphore delay to 10ms which is a well
- * tested value */
- eeprom->semaphore_delay = 10;
- /* Clear EEPROM page size, it will be initialized as needed */
- eeprom->word_page_size = 0;
-
- /*
- * Check for EEPROM present first.
- * If not present leave as none
- */
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
- if (eec & IXGBE_EEC_PRES) {
- eeprom->type = ixgbe_eeprom_spi;
-
- /*
- * SPI EEPROM is assumed here. This code would need to
- * change if a future EEPROM is not SPI.
- */
- eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
- IXGBE_EEC_SIZE_SHIFT);
- eeprom->word_size = 1 << (eeprom_size +
- IXGBE_EEPROM_WORD_SIZE_SHIFT);
- }
-
- if (eec & IXGBE_EEC_ADDR_SIZE)
- eeprom->address_bits = 16;
- else
- eeprom->address_bits = 8;
- hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: "
- "%d\n", eeprom->type, eeprom->word_size,
- eeprom->address_bits);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to write
- * @words: number of words
- * @data: 16 bit word(s) to write to EEPROM
- *
- * Reads 16 bit word(s) from EEPROM through bit-bang method
- **/
-s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- s32 status = 0;
- u16 i, count;
-
- hw->eeprom.ops.init_params(hw);
-
- if (words == 0) {
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- if (offset + words > hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- /*
- * The EEPROM page size cannot be queried from the chip. We do lazy
- * initialization. It is worth to do that when we write large buffer.
- */
- if ((hw->eeprom.word_page_size == 0) &&
- (words > IXGBE_EEPROM_PAGE_SIZE_MAX))
- ixgbe_detect_eeprom_page_size_generic(hw, offset);
-
- /*
- * We cannot hold synchronization semaphores for too long
- * to avoid other entity starvation. However it is more efficient
- * to read in bursts than synchronizing access for each word.
- */
- for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
- count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
- IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
- status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i,
- count, &data[i]);
-
- if (status != 0)
- break;
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @words: number of word(s)
- * @data: 16 bit word(s) to be written to the EEPROM
- *
- * If ixgbe_eeprom_update_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- **/
-static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- s32 status;
- u16 word;
- u16 page_size;
- u16 i;
- u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
-
- /* Prepare the EEPROM for writing */
- status = ixgbe_acquire_eeprom(hw);
-
- if (status == 0) {
- if (ixgbe_ready_eeprom(hw) != 0) {
- ixgbe_release_eeprom(hw);
- status = IXGBE_ERR_EEPROM;
- }
- }
-
- if (status == 0) {
- for (i = 0; i < words; i++) {
- ixgbe_standby_eeprom(hw);
-
- /* Send the WRITE ENABLE command (8 bit opcode ) */
- ixgbe_shift_out_eeprom_bits(hw,
- IXGBE_EEPROM_WREN_OPCODE_SPI,
- IXGBE_EEPROM_OPCODE_BITS);
-
- ixgbe_standby_eeprom(hw);
-
- /*
- * Some SPI eeproms use the 8th address bit embedded
- * in the opcode
- */
- if ((hw->eeprom.address_bits == 8) &&
- ((offset + i) >= 128))
- write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
-
- /* Send the Write command (8-bit opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, write_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
- hw->eeprom.address_bits);
-
- page_size = hw->eeprom.word_page_size;
-
- /* Send the data in burst via SPI*/
- do {
- word = data[i];
- word = (word >> 8) | (word << 8);
- ixgbe_shift_out_eeprom_bits(hw, word, 16);
-
- if (page_size == 0)
- break;
-
- /* do not wrap around page */
- if (((offset + i) & (page_size - 1)) ==
- (page_size - 1))
- break;
- } while (++i < words);
-
- ixgbe_standby_eeprom(hw);
- usleep_range(10000, 20000);
- }
- /* Done with writing - release the EEPROM */
- ixgbe_release_eeprom(hw);
- }
-
- return status;
-}
-
-/**
- * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be written to
- * @data: 16 bit word to be written to the EEPROM
- *
- * If ixgbe_eeprom_update_checksum is not called after this function, the
- * EEPROM will most likely contain an invalid checksum.
- **/
-s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
-{
- s32 status;
-
- hw->eeprom.ops.init_params(hw);
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data);
-
-out:
- return status;
-}
-
-/**
- * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @words: number of word(s)
- * @data: read 16 bit words(s) from EEPROM
- *
- * Reads 16 bit word(s) from EEPROM through bit-bang method
- **/
-s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- s32 status = 0;
- u16 i, count;
-
- hw->eeprom.ops.init_params(hw);
-
- if (words == 0) {
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- if (offset + words > hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- /*
- * We cannot hold synchronization semaphores for too long
- * to avoid other entity starvation. However it is more efficient
- * to read in bursts than synchronizing access for each word.
- */
- for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) {
- count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ?
- IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i);
-
- status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i,
- count, &data[i]);
-
- if (status != 0)
- break;
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @words: number of word(s)
- * @data: read 16 bit word(s) from EEPROM
- *
- * Reads 16 bit word(s) from EEPROM through bit-bang method
- **/
-static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- s32 status;
- u16 word_in;
- u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
- u16 i;
-
- /* Prepare the EEPROM for reading */
- status = ixgbe_acquire_eeprom(hw);
-
- if (status == 0) {
- if (ixgbe_ready_eeprom(hw) != 0) {
- ixgbe_release_eeprom(hw);
- status = IXGBE_ERR_EEPROM;
- }
- }
-
- if (status == 0) {
- for (i = 0; i < words; i++) {
- ixgbe_standby_eeprom(hw);
- /*
- * Some SPI eeproms use the 8th address bit embedded
- * in the opcode
- */
- if ((hw->eeprom.address_bits == 8) &&
- ((offset + i) >= 128))
- read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
-
- /* Send the READ command (opcode + addr) */
- ixgbe_shift_out_eeprom_bits(hw, read_opcode,
- IXGBE_EEPROM_OPCODE_BITS);
- ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2),
- hw->eeprom.address_bits);
-
- /* Read the data. */
- word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
- data[i] = (word_in >> 8) | (word_in << 8);
- }
-
- /* End this read operation */
- ixgbe_release_eeprom(hw);
- }
-
- return status;
-}
-
-/**
- * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be read
- * @data: read 16 bit value from EEPROM
- *
- * Reads 16 bit value from EEPROM through bit-bang method
- **/
-s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 *data)
-{
- s32 status;
-
- hw->eeprom.ops.init_params(hw);
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
-
-out:
- return status;
-}
-
-/**
- * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of word(s)
- * @data: 16 bit word(s) from the EEPROM
- *
- * Reads a 16 bit word(s) from the EEPROM using the EERD register.
- **/
-s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- u32 eerd;
- s32 status = 0;
- u32 i;
-
- hw->eeprom.ops.init_params(hw);
-
- if (words == 0) {
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- for (i = 0; i < words; i++) {
- eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) +
- IXGBE_EEPROM_RW_REG_START;
-
- IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ);
-
- if (status == 0) {
- data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
- IXGBE_EEPROM_RW_REG_DATA);
- } else {
- hw_dbg(hw, "Eeprom read timed out\n");
- goto out;
- }
- }
-out:
- return status;
-}
-
-/**
- * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size
- * @hw: pointer to hardware structure
- * @offset: offset within the EEPROM to be used as a scratch pad
- *
- * Discover EEPROM page size by writing marching data at given offset.
- * This function is called only when we are writing a new large buffer
- * at given offset so the data would be overwritten anyway.
- **/
-static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw,
- u16 offset)
-{
- u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX];
- s32 status = 0;
- u16 i;
-
- for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++)
- data[i] = i;
-
- hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX;
- status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset,
- IXGBE_EEPROM_PAGE_SIZE_MAX, data);
- hw->eeprom.word_page_size = 0;
- if (status != 0)
- goto out;
-
- status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data);
- if (status != 0)
- goto out;
-
- /*
- * When writing in burst more than the actual page size
- * EEPROM address wraps around current page.
- */
- hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0];
-
- hw_dbg(hw, "Detected EEPROM page size = %d words.",
- hw->eeprom.word_page_size);
-out:
- return status;
-}
-
-/**
- * ixgbe_read_eerd_generic - Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
-{
- return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data);
-}
-
-/**
- * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @words: number of words
- * @data: word(s) write to the EEPROM
- *
- * Write a 16 bit word(s) to the EEPROM using the EEWR register.
- **/
-s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data)
-{
- u32 eewr;
- s32 status = 0;
- u16 i;
-
- hw->eeprom.ops.init_params(hw);
-
- if (words == 0) {
- status = IXGBE_ERR_INVALID_ARGUMENT;
- goto out;
- }
-
- if (offset >= hw->eeprom.word_size) {
- status = IXGBE_ERR_EEPROM;
- goto out;
- }
-
- for (i = 0; i < words; i++) {
- eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) |
- (data[i] << IXGBE_EEPROM_RW_REG_DATA) |
- IXGBE_EEPROM_RW_REG_START;
-
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
- if (status != 0) {
- hw_dbg(hw, "Eeprom write EEWR timed out\n");
- goto out;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr);
-
- status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE);
- if (status != 0) {
- hw_dbg(hw, "Eeprom write EEWR timed out\n");
- goto out;
- }
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_write_eewr_generic - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
- *
- * Write a 16 bit word to the EEPROM using the EEWR register.
- **/
-s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
-{
- return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data);
-}
-
-/**
- * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status
- * @hw: pointer to hardware structure
- * @ee_reg: EEPROM flag for polling
- *
- * Polls the status bit (bit 1) of the EERD or EEWR to determine when the
- * read or write is done respectively.
- **/
-static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg)
-{
- u32 i;
- u32 reg;
- s32 status = IXGBE_ERR_EEPROM;
-
- for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) {
- if (ee_reg == IXGBE_NVM_POLL_READ)
- reg = IXGBE_READ_REG(hw, IXGBE_EERD);
- else
- reg = IXGBE_READ_REG(hw, IXGBE_EEWR);
-
- if (reg & IXGBE_EEPROM_RW_REG_DONE) {
- status = 0;
- break;
- }
- udelay(5);
- }
- return status;
-}
-
-/**
- * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
- * @hw: pointer to hardware structure
- *
- * Prepares EEPROM for access using bit-bang method. This function should
- * be called before issuing a command to the EEPROM.
- **/
-static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u32 eec;
- u32 i;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == 0) {
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- /* Request EEPROM Access */
- eec |= IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
-
- for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
- if (eec & IXGBE_EEC_GNT)
- break;
- udelay(5);
- }
-
- /* Release if grant not acquired */
- if (!(eec & IXGBE_EEC_GNT)) {
- eec &= ~IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- hw_dbg(hw, "Could not acquire EEPROM grant\n");
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- status = IXGBE_ERR_EEPROM;
- }
-
- /* Setup EEPROM for Read/Write */
- if (status == 0) {
- /* Clear CS and SK */
- eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
- udelay(1);
- }
- }
- return status;
-}
-
-/**
- * ixgbe_get_eeprom_semaphore - Get hardware semaphore
- * @hw: pointer to hardware structure
- *
- * Sets the hardware semaphores so EEPROM access can occur for bit-bang method
- **/
-static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_EEPROM;
- u32 timeout = 2000;
- u32 i;
- u32 swsm;
-
- /* Get SMBI software semaphore between device drivers first */
- for (i = 0; i < timeout; i++) {
- /*
- * If the SMBI bit is 0 when we read it, then the bit will be
- * set and we have the semaphore
- */
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
- if (!(swsm & IXGBE_SWSM_SMBI)) {
- status = 0;
- break;
- }
- udelay(50);
- }
-
- if (i == timeout) {
- hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore "
- "not granted.\n");
- /*
- * this release is particularly important because our attempts
- * above to get the semaphore may have succeeded, and if there
- * was a timeout, we should unconditionally clear the semaphore
- * bits to free the driver to make progress
- */
- ixgbe_release_eeprom_semaphore(hw);
-
- udelay(50);
- /*
- * one last try
- * If the SMBI bit is 0 when we read it, then the bit will be
- * set and we have the semaphore
- */
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
- if (!(swsm & IXGBE_SWSM_SMBI))
- status = 0;
- }
-
- /* Now get the semaphore between SW/FW through the SWESMBI bit */
- if (status == 0) {
- for (i = 0; i < timeout; i++) {
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
-
- /* Set the SW EEPROM semaphore bit to request access */
- swsm |= IXGBE_SWSM_SWESMBI;
- IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
-
- /*
- * If we set the bit successfully then we got the
- * semaphore.
- */
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
- if (swsm & IXGBE_SWSM_SWESMBI)
- break;
-
- udelay(50);
- }
-
- /*
- * Release semaphores and return error if SW EEPROM semaphore
- * was not granted because we don't have access to the EEPROM
- */
- if (i >= timeout) {
- hw_dbg(hw, "SWESMBI Software EEPROM semaphore "
- "not granted.\n");
- ixgbe_release_eeprom_semaphore(hw);
- status = IXGBE_ERR_EEPROM;
- }
- } else {
- hw_dbg(hw, "Software semaphore SMBI between device drivers "
- "not granted.\n");
- }
-
- return status;
-}
-
-/**
- * ixgbe_release_eeprom_semaphore - Release hardware semaphore
- * @hw: pointer to hardware structure
- *
- * This function clears hardware semaphore bits.
- **/
-static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
-{
- u32 swsm;
-
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
-
- /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
- swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
- IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
- IXGBE_WRITE_FLUSH(hw);
-}
-
-/**
- * ixgbe_ready_eeprom - Polls for EEPROM ready
- * @hw: pointer to hardware structure
- **/
-static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u16 i;
- u8 spi_stat_reg;
-
- /*
- * Read "Status Register" repeatedly until the LSB is cleared. The
- * EEPROM will signal that the command has been completed by clearing
- * bit 0 of the internal status register. If it's not cleared within
- * 5 milliseconds, then error out.
- */
- for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
- ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
- IXGBE_EEPROM_OPCODE_BITS);
- spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
- if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
- break;
-
- udelay(5);
- ixgbe_standby_eeprom(hw);
- }
-
- /*
- * On some parts, SPI write time could vary from 0-20mSec on 3.3V
- * devices (and only 0-5mSec on 5V devices)
- */
- if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
- hw_dbg(hw, "SPI EEPROM Status error\n");
- status = IXGBE_ERR_EEPROM;
- }
-
- return status;
-}
-
-/**
- * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
- * @hw: pointer to hardware structure
- **/
-static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
-{
- u32 eec;
-
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- /* Toggle CS to flush commands */
- eec |= IXGBE_EEC_CS;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
- udelay(1);
- eec &= ~IXGBE_EEC_CS;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
- udelay(1);
-}
-
-/**
- * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
- * @hw: pointer to hardware structure
- * @data: data to send to the EEPROM
- * @count: number of bits to shift out
- **/
-static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
- u16 count)
-{
- u32 eec;
- u32 mask;
- u32 i;
-
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- /*
- * Mask is used to shift "count" bits of "data" out to the EEPROM
- * one bit at a time. Determine the starting bit based on count
- */
- mask = 0x01 << (count - 1);
-
- for (i = 0; i < count; i++) {
- /*
- * A "1" is shifted out to the EEPROM by setting bit "DI" to a
- * "1", and then raising and then lowering the clock (the SK
- * bit controls the clock input to the EEPROM). A "0" is
- * shifted out to the EEPROM by setting "DI" to "0" and then
- * raising and then lowering the clock.
- */
- if (data & mask)
- eec |= IXGBE_EEC_DI;
- else
- eec &= ~IXGBE_EEC_DI;
-
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
-
- udelay(1);
-
- ixgbe_raise_eeprom_clk(hw, &eec);
- ixgbe_lower_eeprom_clk(hw, &eec);
-
- /*
- * Shift mask to signify next bit of data to shift in to the
- * EEPROM
- */
- mask = mask >> 1;
- }
-
- /* We leave the "DI" bit set to "0" when we leave this routine. */
- eec &= ~IXGBE_EEC_DI;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
-}
-
-/**
- * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
- * @hw: pointer to hardware structure
- **/
-static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
-{
- u32 eec;
- u32 i;
- u16 data = 0;
-
- /*
- * In order to read a register from the EEPROM, we need to shift
- * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
- * the clock input to the EEPROM (setting the SK bit), and then reading
- * the value of the "DO" bit. During this "shifting in" process the
- * "DI" bit should always be clear.
- */
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
-
- for (i = 0; i < count; i++) {
- data = data << 1;
- ixgbe_raise_eeprom_clk(hw, &eec);
-
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- eec &= ~(IXGBE_EEC_DI);
- if (eec & IXGBE_EEC_DO)
- data |= 1;
-
- ixgbe_lower_eeprom_clk(hw, &eec);
- }
-
- return data;
-}
-
-/**
- * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
- * @hw: pointer to hardware structure
- * @eec: EEC register's current value
- **/
-static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
-{
- /*
- * Raise the clock input to the EEPROM
- * (setting the SK bit), then delay
- */
- *eec = *eec | IXGBE_EEC_SK;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
- IXGBE_WRITE_FLUSH(hw);
- udelay(1);
-}
-
-/**
- * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
- * @hw: pointer to hardware structure
- * @eecd: EECD's current value
- **/
-static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
-{
- /*
- * Lower the clock input to the EEPROM (clearing the SK bit), then
- * delay
- */
- *eec = *eec & ~IXGBE_EEC_SK;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
- IXGBE_WRITE_FLUSH(hw);
- udelay(1);
-}
-
-/**
- * ixgbe_release_eeprom - Release EEPROM, release semaphores
- * @hw: pointer to hardware structure
- **/
-static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
-{
- u32 eec;
-
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- eec |= IXGBE_EEC_CS; /* Pull CS high */
- eec &= ~IXGBE_EEC_SK; /* Lower SCK */
-
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
- IXGBE_WRITE_FLUSH(hw);
-
- udelay(1);
-
- /* Stop requesting EEPROM access */
- eec &= ~IXGBE_EEC_REQ;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
-
- /*
- * Delay before attempt to obtain semaphore again to allow FW
- * access. semaphore_delay is in ms we need us for usleep_range
- */
- usleep_range(hw->eeprom.semaphore_delay * 1000,
- hw->eeprom.semaphore_delay * 2000);
-}
-
-/**
- * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum
- * @hw: pointer to hardware structure
- **/
-u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw)
-{
- u16 i;
- u16 j;
- u16 checksum = 0;
- u16 length = 0;
- u16 pointer = 0;
- u16 word = 0;
-
- /* Include 0x0-0x3F in the checksum */
- for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
- if (hw->eeprom.ops.read(hw, i, &word) != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- break;
- }
- checksum += word;
- }
-
- /* Include all data from pointers except for the fw pointer */
- for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
- hw->eeprom.ops.read(hw, i, &pointer);
-
- /* Make sure the pointer seems valid */
- if (pointer != 0xFFFF && pointer != 0) {
- hw->eeprom.ops.read(hw, pointer, &length);
-
- if (length != 0xFFFF && length != 0) {
- for (j = pointer+1; j <= pointer+length; j++) {
- hw->eeprom.ops.read(hw, j, &word);
- checksum += word;
- }
- }
- }
- }
-
- checksum = (u16)IXGBE_EEPROM_SUM - checksum;
-
- return checksum;
-}
-
-/**
- * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
- *
- * Performs checksum calculation and validates the EEPROM checksum. If the
- * caller does not need checksum_val, the value can be NULL.
- **/
-s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
- u16 *checksum_val)
-{
- s32 status;
- u16 checksum;
- u16 read_checksum = 0;
-
- /*
- * Read the first word from the EEPROM. If this times out or fails, do
- * not continue or we could be in for a very long wait while every
- * EEPROM read fails
- */
- status = hw->eeprom.ops.read(hw, 0, &checksum);
-
- if (status == 0) {
- checksum = hw->eeprom.ops.calc_checksum(hw);
-
- hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
-
- /*
- * Verify read checksum from EEPROM is the same as
- * calculated checksum
- */
- if (read_checksum != checksum)
- status = IXGBE_ERR_EEPROM_CHECKSUM;
-
- /* If the user cares, return the calculated checksum */
- if (checksum_val)
- *checksum_val = checksum;
- } else {
- hw_dbg(hw, "EEPROM read failed\n");
- }
-
- return status;
-}
-
-/**
- * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
-{
- s32 status;
- u16 checksum;
-
- /*
- * Read the first word from the EEPROM. If this times out or fails, do
- * not continue or we could be in for a very long wait while every
- * EEPROM read fails
- */
- status = hw->eeprom.ops.read(hw, 0, &checksum);
-
- if (status == 0) {
- checksum = hw->eeprom.ops.calc_checksum(hw);
- status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM,
- checksum);
- } else {
- hw_dbg(hw, "EEPROM read failed\n");
- }
-
- return status;
-}
-
-/**
- * ixgbe_validate_mac_addr - Validate MAC address
- * @mac_addr: pointer to MAC address.
- *
- * Tests a MAC address to ensure it is a valid Individual Address
- **/
-s32 ixgbe_validate_mac_addr(u8 *mac_addr)
-{
- s32 status = 0;
-
- /* Make sure it is not a multicast address */
- if (IXGBE_IS_MULTICAST(mac_addr))
- status = IXGBE_ERR_INVALID_MAC_ADDR;
- /* Not a broadcast address */
- else if (IXGBE_IS_BROADCAST(mac_addr))
- status = IXGBE_ERR_INVALID_MAC_ADDR;
- /* Reject the zero address */
- else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
- mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0)
- status = IXGBE_ERR_INVALID_MAC_ADDR;
-
- return status;
-}
-
-/**
- * ixgbe_set_rar_generic - Set Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: VMDq "set" or "pool" index
- * @enable_addr: set flag that address is active
- *
- * Puts an ethernet address into a receive address register.
- **/
-s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
- u32 enable_addr)
-{
- u32 rar_low, rar_high;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /* Make sure we are using a valid rar index range */
- if (index >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", index);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- /* setup VMDq pool selection before this RAR gets enabled */
- hw->mac.ops.set_vmdq(hw, index, vmdq);
-
- /*
- * HW expects these in little endian so we reverse the byte
- * order from network order (big endian) to little endian
- */
- rar_low = ((u32)addr[0] |
- ((u32)addr[1] << 8) |
- ((u32)addr[2] << 16) |
- ((u32)addr[3] << 24));
- /*
- * Some parts put the VMDq setting in the extra RAH bits,
- * so save everything except the lower 16 bits that hold part
- * of the address and the address valid bit.
- */
- rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
- rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
- rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8));
-
- if (enable_addr != 0)
- rar_high |= IXGBE_RAH_AV;
-
- IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-
- return 0;
-}
-
-/**
- * ixgbe_clear_rar_generic - Remove Rx address register
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- *
- * Clears an ethernet address from a receive address register.
- **/
-s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index)
-{
- u32 rar_high;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /* Make sure we are using a valid rar index range */
- if (index >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", index);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- /*
- * Some parts put the VMDq setting in the extra RAH bits,
- * so save everything except the lower 16 bits that hold part
- * of the address and the address valid bit.
- */
- rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
- rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV);
-
- IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
-
- /* clear VMDq pool/queue selection for this RAR */
- hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL);
-
- return 0;
-}
-
-/**
- * ixgbe_init_rx_addrs_generic - Initializes receive address filters.
- * @hw: pointer to hardware structure
- *
- * Places the MAC address in receive address register 0 and clears the rest
- * of the receive address registers. Clears the multicast table. Assumes
- * the receiver is in reset when the routine is called.
- **/
-s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
-{
- u32 i;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /*
- * If the current mac address is valid, assume it is a software override
- * to the permanent address.
- * Otherwise, use the permanent address from the eeprom.
- */
- if (ixgbe_validate_mac_addr(hw->mac.addr) ==
- IXGBE_ERR_INVALID_MAC_ADDR) {
- /* Get the MAC address from the RAR0 for later reference */
- hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
-
- hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr);
- } else {
- /* Setup the receive address. */
- hw_dbg(hw, "Overriding MAC Address in RAR[0]\n");
- hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr);
-
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
-
- /* clear VMDq pool/queue selection for RAR 0 */
- hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL);
- }
- hw->addr_ctrl.overflow_promisc = 0;
-
- hw->addr_ctrl.rar_used_count = 1;
-
- /* Zero out the other receive addresses. */
- hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1);
- for (i = 1; i < rar_entries; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
- }
-
- /* Clear the MTA */
- hw->addr_ctrl.mta_in_use = 0;
- IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
-
- hw_dbg(hw, " Clearing MTA\n");
- for (i = 0; i < hw->mac.mcft_size; i++)
- IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
-
- if (hw->mac.ops.init_uta_tables)
- hw->mac.ops.init_uta_tables(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_mta_vector - Determines bit-vector in multicast table to set
- * @hw: pointer to hardware structure
- * @mc_addr: the multicast address
- *
- * Extracts the 12 bits, from a multicast address, to determine which
- * bit-vector to set in the multicast table. The hardware uses 12 bits, from
- * incoming rx multicast addresses, to determine the bit-vector to check in
- * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initialization
- * to mc_filter_type.
- **/
-static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 vector = 0;
-
- switch (hw->mac.mc_filter_type) {
- case 0: /* use bits [47:36] of the address */
- vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
- break;
- case 1: /* use bits [46:35] of the address */
- vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
- break;
- case 2: /* use bits [45:34] of the address */
- vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
- break;
- case 3: /* use bits [43:32] of the address */
- vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
- break;
- default: /* Invalid mc_filter_type */
- hw_dbg(hw, "MC filter type param set incorrectly\n");
- break;
- }
-
- /* vector can only be 12-bits or boundary will be exceeded */
- vector &= 0xFFF;
- return vector;
-}
-
-/**
- * ixgbe_set_mta - Set bit-vector in multicast table
- * @hw: pointer to hardware structure
- * @hash_value: Multicast address hash value
- *
- * Sets the bit-vector in the multicast table.
- **/
-static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 vector;
- u32 vector_bit;
- u32 vector_reg;
-
- hw->addr_ctrl.mta_in_use++;
-
- vector = ixgbe_mta_vector(hw, mc_addr);
- hw_dbg(hw, " bit-vector = 0x%03X\n", vector);
-
- /*
- * The MTA is a register array of 128 32-bit registers. It is treated
- * like an array of 4096 bits. We want to set bit
- * BitArray[vector_value]. So we figure out what register the bit is
- * in, read it, OR in the new bit, then write back the new value. The
- * register is determined by the upper 7 bits of the vector value and
- * the bit within that register are determined by the lower 5 bits of
- * the value.
- */
- vector_reg = (vector >> 5) & 0x7F;
- vector_bit = vector & 0x1F;
- hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit);
-}
-
-/**
- * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
- * @hw: pointer to hardware structure
- * @netdev: pointer to net device structure
- *
- * The given list replaces any existing list. Clears the MC addrs from receive
- * address registers and the multicast table. Uses unused receive address
- * registers for the first multicast addresses, and hashes the rest into the
- * multicast table.
- **/
-s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
- struct net_device *netdev)
-{
- struct netdev_hw_addr *ha;
- u32 i;
-
- /*
- * Set the new number of MC addresses that we are being requested to
- * use.
- */
- hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev);
- hw->addr_ctrl.mta_in_use = 0;
-
- /* Clear mta_shadow */
- hw_dbg(hw, " Clearing MTA\n");
- memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow));
-
- /* Update mta shadow */
- netdev_for_each_mc_addr(ha, netdev) {
- hw_dbg(hw, " Adding the multicast addresses:\n");
- ixgbe_set_mta(hw, ha->addr);
- }
-
- /* Enable mta */
- for (i = 0; i < hw->mac.mcft_size; i++)
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i,
- hw->mac.mta_shadow[i]);
-
- if (hw->addr_ctrl.mta_in_use > 0)
- IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
- IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
-
- hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n");
- return 0;
-}
-
-/**
- * ixgbe_enable_mc_generic - Enable multicast address in RAR
- * @hw: pointer to hardware structure
- *
- * Enables multicast address in RAR and the use of the multicast hash table.
- **/
-s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
-{
- struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
-
- if (a->mta_in_use > 0)
- IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
- hw->mac.mc_filter_type);
-
- return 0;
-}
-
-/**
- * ixgbe_disable_mc_generic - Disable multicast address in RAR
- * @hw: pointer to hardware structure
- *
- * Disables multicast address in RAR and the use of the multicast hash table.
- **/
-s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
-{
- struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
-
- if (a->mta_in_use > 0)
- IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
-
- return 0;
-}
-
-/**
- * ixgbe_fc_enable_generic - Enable flow control
- * @hw: pointer to hardware structure
- * @packetbuf_num: packet buffer number (0-7)
- *
- * Enable flow control according to the current settings.
- **/
-s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
- s32 ret_val = 0;
- u32 mflcn_reg, fccfg_reg;
- u32 reg;
- u32 rx_pba_size;
- u32 fcrtl, fcrth;
-
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc)
- goto out;
-
-#endif /* CONFIG_DCB */
- /* Negotiate the fc mode to use */
- ret_val = ixgbe_fc_autoneg(hw);
- if (ret_val == IXGBE_ERR_FLOW_CONTROL)
- goto out;
-
- /* Disable any previous flow control settings */
- mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
-
- fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
- fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY);
-
- /*
- * The possible values of fc.current_mode are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but
- * we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
- * other: Invalid.
- */
- switch (hw->fc.current_mode) {
- case ixgbe_fc_none:
- /*
- * Flow control is disabled by software override or autoneg.
- * The code below will actually disable it in the HW.
- */
- break;
- case ixgbe_fc_rx_pause:
- /*
- * Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- mflcn_reg |= IXGBE_MFLCN_RFCE;
- break;
- case ixgbe_fc_tx_pause:
- /*
- * Tx Flow control is enabled, and Rx Flow control is
- * disabled by software override.
- */
- fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
- break;
- case ixgbe_fc_full:
- /* Flow control (both Rx and Tx) is enabled by SW override. */
- mflcn_reg |= IXGBE_MFLCN_RFCE;
- fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X;
- break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
- break;
-#endif /* CONFIG_DCB */
- default:
- hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = IXGBE_ERR_CONFIG;
- goto out;
- break;
- }
-
- /* Set 802.3x based flow control settings. */
- mflcn_reg |= IXGBE_MFLCN_DPF;
- IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
- IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
-
- rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
- rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
-
- fcrth = (rx_pba_size - hw->fc.high_water) << 10;
- fcrtl = (rx_pba_size - hw->fc.low_water) << 10;
-
- if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
- fcrth |= IXGBE_FCRTH_FCEN;
- if (hw->fc.send_xon)
- fcrtl |= IXGBE_FCRTL_XONE;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth);
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl);
-
- /* Configure pause time (2 TCs per register) */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
- if ((packetbuf_num & 1) == 0)
- reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
- else
- reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16);
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg);
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_fc_autoneg - Configure flow control
- * @hw: pointer to hardware structure
- *
- * Compares our advertised flow control capabilities to those advertised by
- * our link partner, and determines the proper flow control mode to use.
- **/
-s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw)
-{
- s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
- ixgbe_link_speed speed;
- bool link_up;
-
- if (hw->fc.disable_fc_autoneg)
- goto out;
-
- /*
- * AN should have completed when the cable was plugged in.
- * Look for reasons to bail out. Bail out if:
- * - FC autoneg is disabled, or if
- * - link is not up.
- *
- * Since we're being called from an LSC, link is already known to be up.
- * So use link_up_wait_to_complete=false.
- */
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
- if (!link_up) {
- ret_val = IXGBE_ERR_FLOW_CONTROL;
- goto out;
- }
-
- switch (hw->phy.media_type) {
- /* Autoneg flow control on fiber adapters */
- case ixgbe_media_type_fiber:
- if (speed == IXGBE_LINK_SPEED_1GB_FULL)
- ret_val = ixgbe_fc_autoneg_fiber(hw);
- break;
-
- /* Autoneg flow control on backplane adapters */
- case ixgbe_media_type_backplane:
- ret_val = ixgbe_fc_autoneg_backplane(hw);
- break;
-
- /* Autoneg flow control on copper adapters */
- case ixgbe_media_type_copper:
- if (ixgbe_device_supports_autoneg_fc(hw) == 0)
- ret_val = ixgbe_fc_autoneg_copper(hw);
- break;
-
- default:
- break;
- }
-
-out:
- if (ret_val == 0) {
- hw->fc.fc_was_autonegged = true;
- } else {
- hw->fc.fc_was_autonegged = false;
- hw->fc.current_mode = hw->fc.requested_mode;
- }
- return ret_val;
-}
-
-/**
- * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber
- * @hw: pointer to hardware structure
- *
- * Enable flow control according on 1 gig fiber.
- **/
-static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw)
-{
- u32 pcs_anadv_reg, pcs_lpab_reg, linkstat;
- s32 ret_val;
-
- /*
- * On multispeed fiber at 1g, bail out if
- * - link is up but AN did not complete, or if
- * - link is up and AN completed but timed out
- */
-
- linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
- if (((linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) ||
- ((linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) {
- ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
- goto out;
- }
-
- pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
- pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
-
- ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg,
- pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE,
- IXGBE_PCS1GANA_ASM_PAUSE,
- IXGBE_PCS1GANA_SYM_PAUSE,
- IXGBE_PCS1GANA_ASM_PAUSE);
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
- *
- * Enable flow control according to IEEE clause 37.
- **/
-static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw)
-{
- u32 links2, anlp1_reg, autoc_reg, links;
- s32 ret_val;
-
- /*
- * On backplane, bail out if
- * - backplane autoneg was not completed, or if
- * - we are 82599 and link partner is not AN enabled
- */
- links = IXGBE_READ_REG(hw, IXGBE_LINKS);
- if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) {
- hw->fc.fc_was_autonegged = false;
- hw->fc.current_mode = hw->fc.requested_mode;
- ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
- goto out;
- }
-
- if (hw->mac.type == ixgbe_mac_82599EB) {
- links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2);
- if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) {
- hw->fc.fc_was_autonegged = false;
- hw->fc.current_mode = hw->fc.requested_mode;
- ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED;
- goto out;
- }
- }
- /*
- * Read the 10g AN autoc and LP ability registers and resolve
- * local flow control settings accordingly
- */
- autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
-
- ret_val = ixgbe_negotiate_fc(hw, autoc_reg,
- anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE,
- IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE);
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37
- * @hw: pointer to hardware structure
- *
- * Enable flow control according to IEEE clause 37.
- **/
-static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw)
-{
- u16 technology_ability_reg = 0;
- u16 lp_technology_ability_reg = 0;
-
- hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN,
- &technology_ability_reg);
- hw->phy.ops.read_reg(hw, MDIO_AN_LPA,
- MDIO_MMD_AN,
- &lp_technology_ability_reg);
-
- return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg,
- (u32)lp_technology_ability_reg,
- IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE,
- IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE);
-}
-
-/**
- * ixgbe_negotiate_fc - Negotiate flow control
- * @hw: pointer to hardware structure
- * @adv_reg: flow control advertised settings
- * @lp_reg: link partner's flow control settings
- * @adv_sym: symmetric pause bit in advertisement
- * @adv_asm: asymmetric pause bit in advertisement
- * @lp_sym: symmetric pause bit in link partner advertisement
- * @lp_asm: asymmetric pause bit in link partner advertisement
- *
- * Find the intersection between advertised settings and link partner's
- * advertised settings
- **/
-static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg,
- u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm)
-{
- if ((!(adv_reg)) || (!(lp_reg)))
- return IXGBE_ERR_FC_NOT_NEGOTIATED;
-
- if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) {
- /*
- * Now we need to check if the user selected Rx ONLY
- * of pause frames. In this case, we had to advertise
- * FULL flow control because we could not advertise RX
- * ONLY. Hence, we must now check to see if we need to
- * turn OFF the TRANSMISSION of PAUSE frames.
- */
- if (hw->fc.requested_mode == ixgbe_fc_full) {
- hw->fc.current_mode = ixgbe_fc_full;
- hw_dbg(hw, "Flow Control = FULL.\n");
- } else {
- hw->fc.current_mode = ixgbe_fc_rx_pause;
- hw_dbg(hw, "Flow Control=RX PAUSE frames only\n");
- }
- } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) &&
- (lp_reg & lp_sym) && (lp_reg & lp_asm)) {
- hw->fc.current_mode = ixgbe_fc_tx_pause;
- hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n");
- } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) &&
- !(lp_reg & lp_sym) && (lp_reg & lp_asm)) {
- hw->fc.current_mode = ixgbe_fc_rx_pause;
- hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n");
- } else {
- hw->fc.current_mode = ixgbe_fc_none;
- hw_dbg(hw, "Flow Control = NONE.\n");
- }
- return 0;
-}
-
-/**
- * ixgbe_setup_fc - Set up flow control
- * @hw: pointer to hardware structure
- *
- * Called at init time to set up flow control.
- **/
-static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
-{
- s32 ret_val = 0;
- u32 reg = 0, reg_bp = 0;
- u16 reg_cu = 0;
-
-#ifdef CONFIG_DCB
- if (hw->fc.requested_mode == ixgbe_fc_pfc) {
- hw->fc.current_mode = hw->fc.requested_mode;
- goto out;
- }
-
-#endif /* CONFIG_DCB */
- /* Validate the packetbuf configuration */
- if (packetbuf_num < 0 || packetbuf_num > 7) {
- hw_dbg(hw, "Invalid packet buffer number [%d], expected range "
- "is 0-7\n", packetbuf_num);
- ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
- goto out;
- }
-
- /*
- * Validate the water mark configuration. Zero water marks are invalid
- * because it causes the controller to just blast out fc packets.
- */
- if (!hw->fc.low_water || !hw->fc.high_water || !hw->fc.pause_time) {
- hw_dbg(hw, "Invalid water mark configuration\n");
- ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
- goto out;
- }
-
- /*
- * Validate the requested mode. Strict IEEE mode does not allow
- * ixgbe_fc_rx_pause because it will cause us to fail at UNH.
- */
- if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) {
- hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict "
- "IEEE mode\n");
- ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS;
- goto out;
- }
-
- /*
- * 10gig parts do not have a word in the EEPROM to determine the
- * default flow control setting, so we explicitly set it to full.
- */
- if (hw->fc.requested_mode == ixgbe_fc_default)
- hw->fc.requested_mode = ixgbe_fc_full;
-
- /*
- * Set up the 1G and 10G flow control advertisement registers so the
- * HW will be able to do fc autoneg once the cable is plugged in. If
- * we link at 10G, the 1G advertisement is harmless and vice versa.
- */
-
- switch (hw->phy.media_type) {
- case ixgbe_media_type_fiber:
- case ixgbe_media_type_backplane:
- reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
- reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- break;
-
- case ixgbe_media_type_copper:
- hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN, ®_cu);
- break;
-
- default:
- ;
- }
-
- /*
- * The possible values of fc.requested_mode are:
- * 0: Flow control is completely disabled
- * 1: Rx flow control is enabled (we can receive pause frames,
- * but not send pause frames).
- * 2: Tx flow control is enabled (we can send pause frames but
- * we do not support receiving pause frames).
- * 3: Both Rx and Tx flow control (symmetric) are enabled.
-#ifdef CONFIG_DCB
- * 4: Priority Flow Control is enabled.
-#endif
- * other: Invalid.
- */
- switch (hw->fc.requested_mode) {
- case ixgbe_fc_none:
- /* Flow control completely disabled by software override. */
- reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
- if (hw->phy.media_type == ixgbe_media_type_backplane)
- reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE |
- IXGBE_AUTOC_ASM_PAUSE);
- else if (hw->phy.media_type == ixgbe_media_type_copper)
- reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
- break;
- case ixgbe_fc_rx_pause:
- /*
- * Rx Flow control is enabled and Tx Flow control is
- * disabled by software override. Since there really
- * isn't a way to advertise that we are capable of RX
- * Pause ONLY, we will advertise that we support both
- * symmetric and asymmetric Rx PAUSE. Later, we will
- * disable the adapter's ability to send PAUSE frames.
- */
- reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
- if (hw->phy.media_type == ixgbe_media_type_backplane)
- reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
- IXGBE_AUTOC_ASM_PAUSE);
- else if (hw->phy.media_type == ixgbe_media_type_copper)
- reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
- break;
- case ixgbe_fc_tx_pause:
- /*
- * Tx Flow control is enabled, and Rx Flow control is
- * disabled by software override.
- */
- reg |= (IXGBE_PCS1GANA_ASM_PAUSE);
- reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE);
- if (hw->phy.media_type == ixgbe_media_type_backplane) {
- reg_bp |= (IXGBE_AUTOC_ASM_PAUSE);
- reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE);
- } else if (hw->phy.media_type == ixgbe_media_type_copper) {
- reg_cu |= (IXGBE_TAF_ASM_PAUSE);
- reg_cu &= ~(IXGBE_TAF_SYM_PAUSE);
- }
- break;
- case ixgbe_fc_full:
- /* Flow control (both Rx and Tx) is enabled by SW override. */
- reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE);
- if (hw->phy.media_type == ixgbe_media_type_backplane)
- reg_bp |= (IXGBE_AUTOC_SYM_PAUSE |
- IXGBE_AUTOC_ASM_PAUSE);
- else if (hw->phy.media_type == ixgbe_media_type_copper)
- reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE);
- break;
-#ifdef CONFIG_DCB
- case ixgbe_fc_pfc:
- goto out;
- break;
-#endif /* CONFIG_DCB */
- default:
- hw_dbg(hw, "Flow control param set incorrectly\n");
- ret_val = IXGBE_ERR_CONFIG;
- goto out;
- break;
- }
-
- if (hw->mac.type != ixgbe_mac_X540) {
- /*
- * Enable auto-negotiation between the MAC & PHY;
- * the MAC will advertise clause 37 flow control.
- */
- IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg);
- reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
-
- /* Disable AN timeout */
- if (hw->fc.strict_ieee)
- reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN;
-
- IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg);
- hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg);
- }
-
- /*
- * AUTOC restart handles negotiation of 1G and 10G on backplane
- * and copper. There is no need to set the PCS1GCTL register.
- *
- */
- if (hw->phy.media_type == ixgbe_media_type_backplane) {
- reg_bp |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp);
- } else if ((hw->phy.media_type == ixgbe_media_type_copper) &&
- (ixgbe_device_supports_autoneg_fc(hw) == 0)) {
- hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN, reg_cu);
- }
-
- hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg);
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_disable_pcie_master - Disable PCI-express master access
- * @hw: pointer to hardware structure
- *
- * Disables PCI-Express master access and verifies there are no pending
- * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
- * bit hasn't caused the master requests to be disabled, else 0
- * is returned signifying master requests disabled.
- **/
-s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- u32 i;
- u32 reg_val;
- u32 number_of_queues;
- s32 status = 0;
- u16 dev_status = 0;
-
- /* Just jump out if bus mastering is already disabled */
- if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
- goto out;
-
- /* Disable the receive unit by stopping each queue */
- number_of_queues = hw->mac.max_rx_queues;
- for (i = 0; i < number_of_queues; i++) {
- reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
- if (reg_val & IXGBE_RXDCTL_ENABLE) {
- reg_val &= ~IXGBE_RXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val);
- }
- }
-
- reg_val = IXGBE_READ_REG(hw, IXGBE_CTRL);
- reg_val |= IXGBE_CTRL_GIO_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, reg_val);
-
- for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
- if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO))
- goto check_device_status;
- udelay(100);
- }
-
- hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n");
- status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
-
- /*
- * Before proceeding, make sure that the PCIe block does not have
- * transactions pending.
- */
-check_device_status:
- for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
- pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS,
- &dev_status);
- if (!(dev_status & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING))
- break;
- udelay(100);
- }
-
- if (i == IXGBE_PCI_MASTER_DISABLE_TIMEOUT)
- hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n");
- else
- goto out;
-
- /*
- * Two consecutive resets are required via CTRL.RST per datasheet
- * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine
- * of this need. The first reset prevents new master requests from
- * being issued by our device. We then must wait 1usec for any
- * remaining completions from the PCIe bus to trickle in, and then reset
- * again to clear out any effects they may have had on our device.
- */
- hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
-
-out:
- return status;
-}
-
-
-/**
- * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
- *
- * Acquires the SWFW semaphore through the GSSR register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
- **/
-s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
-{
- u32 gssr;
- u32 swmask = mask;
- u32 fwmask = mask << 5;
- s32 timeout = 200;
-
- while (timeout) {
- /*
- * SW EEPROM semaphore bit is used for access to all
- * SW_FW_SYNC/GSSR bits (not just EEPROM)
- */
- if (ixgbe_get_eeprom_semaphore(hw))
- return IXGBE_ERR_SWFW_SYNC;
-
- gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
- if (!(gssr & (fwmask | swmask)))
- break;
-
- /*
- * Firmware currently using resource (fwmask) or other software
- * thread currently using resource (swmask)
- */
- ixgbe_release_eeprom_semaphore(hw);
- usleep_range(5000, 10000);
- timeout--;
- }
-
- if (!timeout) {
- hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n");
- return IXGBE_ERR_SWFW_SYNC;
- }
-
- gssr |= swmask;
- IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
-
- ixgbe_release_eeprom_semaphore(hw);
- return 0;
-}
-
-/**
- * ixgbe_release_swfw_sync - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
- *
- * Releases the SWFW semaphore through the GSSR register for the specified
- * function (CSR, PHY0, PHY1, EEPROM, Flash)
- **/
-void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
-{
- u32 gssr;
- u32 swmask = mask;
-
- ixgbe_get_eeprom_semaphore(hw);
-
- gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
- gssr &= ~swmask;
- IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
-
- ixgbe_release_eeprom_semaphore(hw);
-}
-
-/**
- * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit
- * @hw: pointer to hardware structure
- * @regval: register value to write to RXCTRL
- *
- * Enables the Rx DMA unit
- **/
-s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval)
-{
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_start_generic - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
- **/
-s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
-{
- ixgbe_link_speed speed = 0;
- bool link_up = 0;
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- /*
- * Link must be up to auto-blink the LEDs;
- * Force it if link is down.
- */
- hw->mac.ops.check_link(hw, &speed, &link_up, false);
-
- if (!link_up) {
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- autoc_reg |= IXGBE_AUTOC_FLU;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
- IXGBE_WRITE_FLUSH(hw);
- usleep_range(10000, 20000);
- }
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg |= IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
- **/
-s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
-{
- u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
-
- autoc_reg &= ~IXGBE_AUTOC_FLU;
- autoc_reg |= IXGBE_AUTOC_AN_RESTART;
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
-
- led_reg &= ~IXGBE_LED_MODE_MASK(index);
- led_reg &= ~IXGBE_LED_BLINK(index);
- led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM
- * @hw: pointer to hardware structure
- * @san_mac_offset: SAN MAC address offset
- *
- * This function will read the EEPROM location for the SAN MAC address
- * pointer, and returns the value at that location. This is used in both
- * get and set mac_addr routines.
- **/
-static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw,
- u16 *san_mac_offset)
-{
- /*
- * First read the EEPROM pointer to see if the MAC addresses are
- * available.
- */
- hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset);
-
- return 0;
-}
-
-/**
- * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM
- * @hw: pointer to hardware structure
- * @san_mac_addr: SAN MAC address
- *
- * Reads the SAN MAC address from the EEPROM, if it's available. This is
- * per-port, so set_lan_id() must be called before reading the addresses.
- * set_lan_id() is called by identify_sfp(), but this cannot be relied
- * upon for non-SFP connections, so we must call it here.
- **/
-s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr)
-{
- u16 san_mac_data, san_mac_offset;
- u8 i;
-
- /*
- * First read the EEPROM pointer to see if the MAC addresses are
- * available. If they're not, no point in calling set_lan_id() here.
- */
- ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset);
-
- if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) {
- /*
- * No addresses available in this EEPROM. It's not an
- * error though, so just wipe the local address and return.
- */
- for (i = 0; i < 6; i++)
- san_mac_addr[i] = 0xFF;
-
- goto san_mac_addr_out;
- }
-
- /* make sure we know which port we need to program */
- hw->mac.ops.set_lan_id(hw);
- /* apply the port offset to the address offset */
- (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) :
- (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET);
- for (i = 0; i < 3; i++) {
- hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data);
- san_mac_addr[i * 2] = (u8)(san_mac_data);
- san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8);
- san_mac_offset++;
- }
-
-san_mac_addr_out:
- return 0;
-}
-
-/**
- * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count
- * @hw: pointer to hardware structure
- *
- * Read PCIe configuration space, and get the MSI-X vector count from
- * the capabilities table.
- **/
-u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw)
-{
- struct ixgbe_adapter *adapter = hw->back;
- u16 msix_count;
- pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS,
- &msix_count);
- msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
-
- /* MSI-X count is zero-based in HW, so increment to give proper value */
- msix_count++;
-
- return msix_count;
-}
-
-/**
- * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to disassociate
- * @vmdq: VMDq pool index to remove from the rar
- **/
-s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 mpsar_lo, mpsar_hi;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /* Make sure we are using a valid rar index range */
- if (rar >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
- mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
-
- if (!mpsar_lo && !mpsar_hi)
- goto done;
-
- if (vmdq == IXGBE_CLEAR_VMDQ_ALL) {
- if (mpsar_lo) {
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0);
- mpsar_lo = 0;
- }
- if (mpsar_hi) {
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0);
- mpsar_hi = 0;
- }
- } else if (vmdq < 32) {
- mpsar_lo &= ~(1 << vmdq);
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo);
- } else {
- mpsar_hi &= ~(1 << (vmdq - 32));
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi);
- }
-
- /* was that the last pool using this rar? */
- if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0)
- hw->mac.ops.clear_rar(hw, rar);
-done:
- return 0;
-}
-
-/**
- * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address
- * @hw: pointer to hardware struct
- * @rar: receive address register index to associate with a VMDq index
- * @vmdq: VMDq pool index
- **/
-s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq)
-{
- u32 mpsar;
- u32 rar_entries = hw->mac.num_rar_entries;
-
- /* Make sure we are using a valid rar index range */
- if (rar >= rar_entries) {
- hw_dbg(hw, "RAR index %d is out of range.\n", rar);
- return IXGBE_ERR_INVALID_ARGUMENT;
- }
-
- if (vmdq < 32) {
- mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar));
- mpsar |= 1 << vmdq;
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar);
- } else {
- mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar));
- mpsar |= 1 << (vmdq - 32);
- IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar);
- }
- return 0;
-}
-
-/**
- * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw)
-{
- int i;
-
- for (i = 0; i < 128; i++)
- IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0);
-
- return 0;
-}
-
-/**
- * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- *
- * return the VLVF index where this VLAN id should be placed
- *
- **/
-static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan)
-{
- u32 bits = 0;
- u32 first_empty_slot = 0;
- s32 regindex;
-
- /* short cut the special case */
- if (vlan == 0)
- return 0;
-
- /*
- * Search for the vlan id in the VLVF entries. Save off the first empty
- * slot found along the way
- */
- for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) {
- bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex));
- if (!bits && !(first_empty_slot))
- first_empty_slot = regindex;
- else if ((bits & 0x0FFF) == vlan)
- break;
- }
-
- /*
- * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan
- * in the VLVF. Else use the first empty VLVF register for this
- * vlan id.
- */
- if (regindex >= IXGBE_VLVF_ENTRIES) {
- if (first_empty_slot)
- regindex = first_empty_slot;
- else {
- hw_dbg(hw, "No space in VLVF.\n");
- regindex = IXGBE_ERR_NO_SPACE;
- }
- }
-
- return regindex;
-}
-
-/**
- * ixgbe_set_vfta_generic - Set VLAN filter table
- * @hw: pointer to hardware structure
- * @vlan: VLAN id to write to VLAN filter
- * @vind: VMDq output index that maps queue to VLAN id in VFVFB
- * @vlan_on: boolean flag to turn on/off VLAN in VFVF
- *
- * Turn on/off specified VLAN in the VLAN filter table.
- **/
-s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
-{
- s32 regindex;
- u32 bitindex;
- u32 vfta;
- u32 bits;
- u32 vt;
- u32 targetbit;
- bool vfta_changed = false;
-
- if (vlan > 4095)
- return IXGBE_ERR_PARAM;
-
- /*
- * this is a 2 part operation - first the VFTA, then the
- * VLVF and VLVFB if VT Mode is set
- * We don't write the VFTA until we know the VLVF part succeeded.
- */
-
- /* Part 1
- * The VFTA is a bitstring made up of 128 32-bit registers
- * that enable the particular VLAN id, much like the MTA:
- * bits[11-5]: which register
- * bits[4-0]: which bit in the register
- */
- regindex = (vlan >> 5) & 0x7F;
- bitindex = vlan & 0x1F;
- targetbit = (1 << bitindex);
- vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex));
-
- if (vlan_on) {
- if (!(vfta & targetbit)) {
- vfta |= targetbit;
- vfta_changed = true;
- }
- } else {
- if ((vfta & targetbit)) {
- vfta &= ~targetbit;
- vfta_changed = true;
- }
- }
-
- /* Part 2
- * If VT Mode is set
- * Either vlan_on
- * make sure the vlan is in VLVF
- * set the vind bit in the matching VLVFB
- * Or !vlan_on
- * clear the pool bit and possibly the vind
- */
- vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- if (vt & IXGBE_VT_CTL_VT_ENABLE) {
- s32 vlvf_index;
-
- vlvf_index = ixgbe_find_vlvf_slot(hw, vlan);
- if (vlvf_index < 0)
- return vlvf_index;
-
- if (vlan_on) {
- /* set the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index*2));
- bits |= (1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index*2),
- bits);
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index*2)+1));
- bits |= (1 << (vind-32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index*2)+1),
- bits);
- }
- } else {
- /* clear the pool bit */
- if (vind < 32) {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index*2));
- bits &= ~(1 << vind);
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB(vlvf_index*2),
- bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index*2)+1));
- } else {
- bits = IXGBE_READ_REG(hw,
- IXGBE_VLVFB((vlvf_index*2)+1));
- bits &= ~(1 << (vind-32));
- IXGBE_WRITE_REG(hw,
- IXGBE_VLVFB((vlvf_index*2)+1),
- bits);
- bits |= IXGBE_READ_REG(hw,
- IXGBE_VLVFB(vlvf_index*2));
- }
- }
-
- /*
- * If there are still bits set in the VLVFB registers
- * for the VLAN ID indicated we need to see if the
- * caller is requesting that we clear the VFTA entry bit.
- * If the caller has requested that we clear the VFTA
- * entry bit but there are still pools/VFs using this VLAN
- * ID entry then ignore the request. We're not worried
- * about the case where we're turning the VFTA VLAN ID
- * entry bit on, only when requested to turn it off as
- * there may be multiple pools and/or VFs using the
- * VLAN ID entry. In that case we cannot clear the
- * VFTA bit until all pools/VFs using that VLAN ID have also
- * been cleared. This will be indicated by "bits" being
- * zero.
- */
- if (bits) {
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index),
- (IXGBE_VLVF_VIEN | vlan));
- if (!vlan_on) {
- /* someone wants to clear the vfta entry
- * but some pools/VFs are still using it.
- * Ignore it. */
- vfta_changed = false;
- }
- }
- else
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0);
- }
-
- if (vfta_changed)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta);
-
- return 0;
-}
-
-/**
- * ixgbe_clear_vfta_generic - Clear VLAN filter table
- * @hw: pointer to hardware structure
- *
- * Clears the VLAN filer table, and the VMDq index associated with the filter
- **/
-s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
-{
- u32 offset;
-
- for (offset = 0; offset < hw->mac.vft_size; offset++)
- IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
-
- for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) {
- IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_check_mac_link_generic - Determine link and speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true when link is up
- * @link_up_wait_to_complete: bool used to wait for link up or not
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete)
-{
- u32 links_reg, links_orig;
- u32 i;
-
- /* clear the old state */
- links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
-
- if (links_orig != links_reg) {
- hw_dbg(hw, "LINKS changed from %08X to %08X\n",
- links_orig, links_reg);
- }
-
- if (link_up_wait_to_complete) {
- for (i = 0; i < IXGBE_LINK_UP_TIME; i++) {
- if (links_reg & IXGBE_LINKS_UP) {
- *link_up = true;
- break;
- } else {
- *link_up = false;
- }
- msleep(100);
- links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
- }
- } else {
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
- }
-
- if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_10G_82599)
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_1G_82599)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- else if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_100_82599)
- *speed = IXGBE_LINK_SPEED_100_FULL;
- else
- *speed = IXGBE_LINK_SPEED_UNKNOWN;
-
- /* if link is down, zero out the current_mode */
- if (*link_up == false) {
- hw->fc.current_mode = ixgbe_fc_none;
- hw->fc.fc_was_autonegged = false;
- }
-
- return 0;
-}
-
-/**
- * ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from
- * the EEPROM
- * @hw: pointer to hardware structure
- * @wwnn_prefix: the alternative WWNN prefix
- * @wwpn_prefix: the alternative WWPN prefix
- *
- * This function will read the EEPROM from the alternative SAN MAC address
- * block to check the support for the alternative WWNN/WWPN prefix support.
- **/
-s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
- u16 *wwpn_prefix)
-{
- u16 offset, caps;
- u16 alt_san_mac_blk_offset;
-
- /* clear output first */
- *wwnn_prefix = 0xFFFF;
- *wwpn_prefix = 0xFFFF;
-
- /* check if alternative SAN MAC is supported */
- hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
- &alt_san_mac_blk_offset);
-
- if ((alt_san_mac_blk_offset == 0) ||
- (alt_san_mac_blk_offset == 0xFFFF))
- goto wwn_prefix_out;
-
- /* check capability in alternative san mac address block */
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
- hw->eeprom.ops.read(hw, offset, &caps);
- if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
- goto wwn_prefix_out;
-
- /* get the corresponding prefix for WWNN/WWPN */
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwnn_prefix);
-
- offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
- hw->eeprom.ops.read(hw, offset, wwpn_prefix);
-
-wwn_prefix_out:
- return 0;
-}
-
-/**
- * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow
- * control
- * @hw: pointer to hardware structure
- *
- * There are several phys that do not support autoneg flow control. This
- * function check the device id to see if the associated phy supports
- * autoneg flow control.
- **/
-static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw)
-{
-
- switch (hw->device_id) {
- case IXGBE_DEV_ID_X540T:
- return 0;
- case IXGBE_DEV_ID_82599_T3_LOM:
- return 0;
- default:
- return IXGBE_ERR_FC_NOT_SUPPORTED;
- }
-}
-
-/**
- * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for anti-spoofing
- * @pf: Physical Function pool - do not enable anti-spoofing for the PF
- *
- **/
-void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf)
-{
- int j;
- int pf_target_reg = pf >> 3;
- int pf_target_shift = pf % 8;
- u32 pfvfspoof = 0;
-
- if (hw->mac.type == ixgbe_mac_82598EB)
- return;
-
- if (enable)
- pfvfspoof = IXGBE_SPOOF_MACAS_MASK;
-
- /*
- * PFVFSPOOF register array is size 8 with 8 bits assigned to
- * MAC anti-spoof enables in each register array element.
- */
- for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++)
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof);
-
- /* If not enabling anti-spoofing then done */
- if (!enable)
- return;
-
- /*
- * The PF should be allowed to spoof so that it can support
- * emulation mode NICs. Reset the bit assigned to the PF
- */
- pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg));
- pfvfspoof ^= (1 << pf_target_shift);
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof);
-}
-
-/**
- * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
- * @hw: pointer to hardware structure
- * @enable: enable or disable switch for VLAN anti-spoofing
- * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing
- *
- **/
-void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
-{
- int vf_target_reg = vf >> 3;
- int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT;
- u32 pfvfspoof;
-
- if (hw->mac.type == ixgbe_mac_82598EB)
- return;
-
- pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg));
- if (enable)
- pfvfspoof |= (1 << vf_target_shift);
- else
- pfvfspoof &= ~(1 << vf_target_shift);
- IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
-}
-
-/**
- * ixgbe_get_device_caps_generic - Get additional device capabilities
- * @hw: pointer to hardware structure
- * @device_caps: the EEPROM word with the extra device capabilities
- *
- * This function will read the EEPROM location for the device capabilities,
- * and return the word through device_caps.
- **/
-s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps)
-{
- hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps);
-
- return 0;
-}
-
-/**
- * ixgbe_set_rxpba_generic - Initialize RX packet buffer
- * @hw: pointer to hardware structure
- * @num_pb: number of packet buffers to allocate
- * @headroom: reserve n KB of headroom
- * @strategy: packet buffer allocation strategy
- **/
-void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw,
- int num_pb,
- u32 headroom,
- int strategy)
-{
- u32 pbsize = hw->mac.rx_pb_size;
- int i = 0;
- u32 rxpktsize, txpktsize, txpbthresh;
-
- /* Reserve headroom */
- pbsize -= headroom;
-
- if (!num_pb)
- num_pb = 1;
-
- /* Divide remaining packet buffer space amongst the number
- * of packet buffers requested using supplied strategy.
- */
- switch (strategy) {
- case (PBA_STRATEGY_WEIGHTED):
- /* pba_80_48 strategy weight first half of packet buffer with
- * 5/8 of the packet buffer space.
- */
- rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8));
- pbsize -= rxpktsize * (num_pb / 2);
- rxpktsize <<= IXGBE_RXPBSIZE_SHIFT;
- for (; i < (num_pb / 2); i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
- /* Fall through to configure remaining packet buffers */
- case (PBA_STRATEGY_EQUAL):
- /* Divide the remaining Rx packet buffer evenly among the TCs */
- rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT;
- for (; i < num_pb; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize);
- break;
- default:
- break;
- }
-
- /*
- * Setup Tx packet buffer and threshold equally for all TCs
- * TXPBTHRESH register is set in K so divide by 1024 and subtract
- * 10 since the largest packet we support is just over 9K.
- */
- txpktsize = IXGBE_TXPBSIZE_MAX / num_pb;
- txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX;
- for (i = 0; i < num_pb; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize);
- IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh);
- }
-
- /* Clear unused TCs, if any, to zero buffer size*/
- for (; i < IXGBE_MAX_PB; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0);
- IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0);
- }
-}
-
-/**
- * ixgbe_calculate_checksum - Calculate checksum for buffer
- * @buffer: pointer to EEPROM
- * @length: size of EEPROM to calculate a checksum for
- * Calculates the checksum for some buffer on a specified length. The
- * checksum calculated is returned.
- **/
-static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length)
-{
- u32 i;
- u8 sum = 0;
-
- if (!buffer)
- return 0;
-
- for (i = 0; i < length; i++)
- sum += buffer[i];
-
- return (u8) (0 - sum);
-}
-
-/**
- * ixgbe_host_interface_command - Issue command to manageability block
- * @hw: pointer to the HW structure
- * @buffer: contains the command to write and where the return status will
- * be placed
- * @lenght: lenght of buffer, must be multiple of 4 bytes
- *
- * Communicates with the manageability block. On success return 0
- * else return IXGBE_ERR_HOST_INTERFACE_COMMAND.
- **/
-static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u8 *buffer,
- u32 length)
-{
- u32 hicr, i;
- u32 hdr_size = sizeof(struct ixgbe_hic_hdr);
- u8 buf_len, dword_len;
-
- s32 ret_val = 0;
-
- if (length == 0 || length & 0x3 ||
- length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) {
- hw_dbg(hw, "Buffer length failure.\n");
- ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto out;
- }
-
- /* Check that the host interface is enabled. */
- hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if ((hicr & IXGBE_HICR_EN) == 0) {
- hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n");
- ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto out;
- }
-
- /* Calculate length in DWORDs */
- dword_len = length >> 2;
-
- /*
- * The device driver writes the relevant command block
- * into the ram area.
- */
- for (i = 0; i < dword_len; i++)
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG,
- i, *((u32 *)buffer + i));
-
- /* Setting this bit tells the ARC that a new command is pending. */
- IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C);
-
- for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) {
- hicr = IXGBE_READ_REG(hw, IXGBE_HICR);
- if (!(hicr & IXGBE_HICR_C))
- break;
- usleep_range(1000, 2000);
- }
-
- /* Check command successful completion. */
- if (i == IXGBE_HI_COMMAND_TIMEOUT ||
- (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) {
- hw_dbg(hw, "Command has failed with no status valid.\n");
- ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto out;
- }
-
- /* Calculate length in DWORDs */
- dword_len = hdr_size >> 2;
-
- /* first pull in the header so we know the buffer length */
- for (i = 0; i < dword_len; i++)
- *((u32 *)buffer + i) =
- IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
-
- /* If there is any thing in data position pull it in */
- buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len;
- if (buf_len == 0)
- goto out;
-
- if (length < (buf_len + hdr_size)) {
- hw_dbg(hw, "Buffer not large enough for reply message.\n");
- ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
- goto out;
- }
-
- /* Calculate length in DWORDs, add one for odd lengths */
- dword_len = (buf_len + 1) >> 2;
-
- /* Pull in the rest of the buffer (i is where we left off)*/
- for (; i < buf_len; i++)
- *((u32 *)buffer + i) =
- IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i);
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware
- * @hw: pointer to the HW structure
- * @maj: driver version major number
- * @min: driver version minor number
- * @build: driver version build number
- * @sub: driver version sub build number
- *
- * Sends driver version number to firmware through the manageability
- * block. On success return 0
- * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring
- * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails.
- **/
-s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
- u8 build, u8 sub)
-{
- struct ixgbe_hic_drv_info fw_cmd;
- int i;
- s32 ret_val = 0;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) {
- ret_val = IXGBE_ERR_SWFW_SYNC;
- goto out;
- }
-
- fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO;
- fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN;
- fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED;
- fw_cmd.port_num = (u8)hw->bus.func;
- fw_cmd.ver_maj = maj;
- fw_cmd.ver_min = min;
- fw_cmd.ver_build = build;
- fw_cmd.ver_sub = sub;
- fw_cmd.hdr.checksum = 0;
- fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd,
- (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len));
- fw_cmd.pad = 0;
- fw_cmd.pad2 = 0;
-
- for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
- ret_val = ixgbe_host_interface_command(hw, (u8 *)&fw_cmd,
- sizeof(fw_cmd));
- if (ret_val != 0)
- continue;
-
- if (fw_cmd.hdr.cmd_or_resp.ret_status ==
- FW_CEM_RESP_STATUS_SUCCESS)
- ret_val = 0;
- else
- ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND;
-
- break;
- }
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM);
-out:
- return ret_val;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_COMMON_H_
-#define _IXGBE_COMMON_H_
-
-#include "ixgbe_type.h"
-#include "ixgbe.h"
-
-u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw);
-s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw);
-s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
-s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
-s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw);
-s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
-s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num,
- u32 pba_num_size);
-s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
-s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
-void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw);
-s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
-
-s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
-
-s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
-s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
-s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
-s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
-s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 *data);
-s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
- u16 words, u16 *data);
-u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw);
-s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
- u16 *checksum_val);
-s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
-
-s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq,
- u32 enable_addr);
-s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
-s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw,
- struct net_device *netdev);
-s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
-s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
-s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval);
-s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
-s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw);
-
-s32 ixgbe_validate_mac_addr(u8 *mac_addr);
-s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask);
-void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask);
-s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
-s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr);
-s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
-s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq);
-s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw);
-s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
- u32 vind, bool vlan_on);
-s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
-s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *link_up, bool link_up_wait_to_complete);
-s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix,
- u16 *wwpn_prefix);
-s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
-s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
-void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf);
-void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf);
-s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps);
-s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min,
- u8 build, u8 ver);
-
-void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb,
- u32 headroom, int strategy);
-
-#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
-
-#ifndef writeq
-#define writeq(val, addr) writel((u32) (val), addr); \
- writel((u32) (val >> 32), (addr + 4));
-#endif
-
-#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg)))
-
-#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
-
-#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\
- writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
-
-#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\
- readl((a)->hw_addr + (reg) + ((offset) << 2)))
-
-#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
-
-#define hw_dbg(hw, format, arg...) \
- netdev_dbg(((struct ixgbe_adapter *)(hw->back))->netdev, format, ##arg)
-#define e_dev_info(format, arg...) \
- dev_info(&adapter->pdev->dev, format, ## arg)
-#define e_dev_warn(format, arg...) \
- dev_warn(&adapter->pdev->dev, format, ## arg)
-#define e_dev_err(format, arg...) \
- dev_err(&adapter->pdev->dev, format, ## arg)
-#define e_dev_notice(format, arg...) \
- dev_notice(&adapter->pdev->dev, format, ## arg)
-#define e_info(msglvl, format, arg...) \
- netif_info(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_err(msglvl, format, arg...) \
- netif_err(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_warn(msglvl, format, arg...) \
- netif_warn(adapter, msglvl, adapter->netdev, format, ## arg)
-#define e_crit(msglvl, format, arg...) \
- netif_crit(adapter, msglvl, adapter->netdev, format, ## arg)
-#endif /* IXGBE_COMMON */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-#include "ixgbe.h"
-#include "ixgbe_type.h"
-#include "ixgbe_dcb.h"
-#include "ixgbe_dcb_82598.h"
-#include "ixgbe_dcb_82599.h"
-
-/**
- * ixgbe_ieee_credits - This calculates the ieee traffic class
- * credits from the configured bandwidth percentages. Credits
- * are the smallest unit programmable into the underlying
- * hardware. The IEEE 802.1Qaz specification do not use bandwidth
- * groups so this is much simplified from the CEE case.
- */
-s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, __u16 *max, int max_frame)
-{
- int min_percent = 100;
- int min_credit, multiplier;
- int i;
-
- min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
- DCB_CREDIT_QUANTUM;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- if (bw[i] < min_percent && bw[i])
- min_percent = bw[i];
- }
-
- multiplier = (min_credit / min_percent) + 1;
-
- /* Find out the hw credits for each TC */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- int val = min(bw[i] * multiplier, MAX_CREDIT_REFILL);
-
- if (val < min_credit)
- val = min_credit;
- refill[i] = val;
-
- max[i] = bw[i] ? (bw[i] * MAX_CREDIT)/100 : min_credit;
- }
- return 0;
-}
-
-/**
- * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits
- * @ixgbe_dcb_config: Struct containing DCB settings.
- * @direction: Configuring either Tx or Rx.
- *
- * This function calculates the credits allocated to each traffic class.
- * It should be called only after the rules are checked by
- * ixgbe_dcb_check_config().
- */
-s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw,
- struct ixgbe_dcb_config *dcb_config,
- int max_frame, u8 direction)
-{
- struct tc_bw_alloc *p;
- int min_credit;
- int min_multiplier;
- int min_percent = 100;
- s32 ret_val = 0;
- /* Initialization values default for Tx settings */
- u32 credit_refill = 0;
- u32 credit_max = 0;
- u16 link_percentage = 0;
- u8 bw_percent = 0;
- u8 i;
-
- if (dcb_config == NULL) {
- ret_val = DCB_ERR_CONFIG;
- goto out;
- }
-
- min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) /
- DCB_CREDIT_QUANTUM;
-
- /* Find smallest link percentage */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- p = &dcb_config->tc_config[i].path[direction];
- bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
- link_percentage = p->bwg_percent;
-
- link_percentage = (link_percentage * bw_percent) / 100;
-
- if (link_percentage && link_percentage < min_percent)
- min_percent = link_percentage;
- }
-
- /*
- * The ratio between traffic classes will control the bandwidth
- * percentages seen on the wire. To calculate this ratio we use
- * a multiplier. It is required that the refill credits must be
- * larger than the max frame size so here we find the smallest
- * multiplier that will allow all bandwidth percentages to be
- * greater than the max frame size.
- */
- min_multiplier = (min_credit / min_percent) + 1;
-
- /* Find out the link percentage for each TC first */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- p = &dcb_config->tc_config[i].path[direction];
- bw_percent = dcb_config->bw_percentage[direction][p->bwg_id];
-
- link_percentage = p->bwg_percent;
- /* Must be careful of integer division for very small nums */
- link_percentage = (link_percentage * bw_percent) / 100;
- if (p->bwg_percent > 0 && link_percentage == 0)
- link_percentage = 1;
-
- /* Save link_percentage for reference */
- p->link_percent = (u8)link_percentage;
-
- /* Calculate credit refill ratio using multiplier */
- credit_refill = min(link_percentage * min_multiplier,
- MAX_CREDIT_REFILL);
- p->data_credits_refill = (u16)credit_refill;
-
- /* Calculate maximum credit for the TC */
- credit_max = (link_percentage * MAX_CREDIT) / 100;
-
- /*
- * Adjustment based on rule checking, if the percentage
- * of a TC is too small, the maximum credit may not be
- * enough to send out a jumbo frame in data plane arbitration.
- */
- if (credit_max && (credit_max < min_credit))
- credit_max = min_credit;
-
- if (direction == DCB_TX_CONFIG) {
- /*
- * Adjustment based on rule checking, if the
- * percentage of a TC is too small, the maximum
- * credit may not be enough to send out a TSO
- * packet in descriptor plane arbitration.
- */
- if ((hw->mac.type == ixgbe_mac_82598EB) &&
- credit_max &&
- (credit_max < MINIMUM_CREDIT_FOR_TSO))
- credit_max = MINIMUM_CREDIT_FOR_TSO;
-
- dcb_config->tc_config[i].desc_credits_max =
- (u16)credit_max;
- }
-
- p->data_credits_max = (u16)credit_max;
- }
-
-out:
- return ret_val;
-}
-
-void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en)
-{
- int i;
-
- *pfc_en = 0;
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- *pfc_en |= (cfg->tc_config[i].dcb_pfc & 0xF) << i;
-}
-
-void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *cfg, int direction,
- u16 *refill)
-{
- struct tc_bw_alloc *p;
- int i;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- p = &cfg->tc_config[i].path[direction];
- refill[i] = p->data_credits_refill;
- }
-}
-
-void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max)
-{
- int i;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- max[i] = cfg->tc_config[i].desc_credits_max;
-}
-
-void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *cfg, int direction,
- u8 *bwgid)
-{
- struct tc_bw_alloc *p;
- int i;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- p = &cfg->tc_config[i].path[direction];
- bwgid[i] = p->bwg_id;
- }
-}
-
-void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *cfg, int direction,
- u8 *ptype)
-{
- struct tc_bw_alloc *p;
- int i;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- p = &cfg->tc_config[i].path[direction];
- ptype[i] = p->prio_type;
- }
-}
-
-/**
- * ixgbe_dcb_hw_config - Config and enable DCB
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure dcb settings and enable dcb mode.
- */
-s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw,
- struct ixgbe_dcb_config *dcb_config)
-{
- s32 ret = 0;
- u8 pfc_en;
- u8 ptype[MAX_TRAFFIC_CLASS];
- u8 bwgid[MAX_TRAFFIC_CLASS];
- u16 refill[MAX_TRAFFIC_CLASS];
- u16 max[MAX_TRAFFIC_CLASS];
- /* CEE does not define a priority to tc mapping so map 1:1 */
- u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
-
- /* Unpack CEE standard containers */
- ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en);
- ixgbe_dcb_unpack_refill(dcb_config, DCB_TX_CONFIG, refill);
- ixgbe_dcb_unpack_max(dcb_config, max);
- ixgbe_dcb_unpack_bwgid(dcb_config, DCB_TX_CONFIG, bwgid);
- ixgbe_dcb_unpack_prio(dcb_config, DCB_TX_CONFIG, ptype);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- ret = ixgbe_dcb_hw_config_82598(hw, pfc_en, refill, max,
- bwgid, ptype);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- ret = ixgbe_dcb_hw_config_82599(hw, pfc_en, refill, max,
- bwgid, ptype, prio_tc);
- break;
- default:
- break;
- }
- return ret;
-}
-
-/* Helper routines to abstract HW specifics from DCB netlink ops */
-s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en)
-{
- int ret = -EINVAL;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en);
- break;
- default:
- break;
- }
- return ret;
-}
-
-s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw,
- u16 *refill, u16 *max, u8 *bwg_id,
- u8 *prio_type, u8 *prio_tc)
-{
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max,
- prio_type);
- ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
- bwg_id, prio_type);
- ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
- bwg_id, prio_type);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max,
- bwg_id, prio_type, prio_tc);
- ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
- bwg_id, prio_type);
- ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id,
- prio_type, prio_tc);
- break;
- default:
- break;
- }
- return 0;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _DCB_CONFIG_H_
-#define _DCB_CONFIG_H_
-
-#include "ixgbe_type.h"
-
-/* DCB data structures */
-
-#define IXGBE_MAX_PACKET_BUFFERS 8
-#define MAX_USER_PRIORITY 8
-#define MAX_TRAFFIC_CLASS 8
-#define MAX_BW_GROUP 8
-#define BW_PERCENT 100
-
-#define DCB_TX_CONFIG 0
-#define DCB_RX_CONFIG 1
-
-/* DCB error Codes */
-#define DCB_SUCCESS 0
-#define DCB_ERR_CONFIG -1
-#define DCB_ERR_PARAM -2
-
-/* Transmit and receive Errors */
-/* Error in bandwidth group allocation */
-#define DCB_ERR_BW_GROUP -3
-/* Error in traffic class bandwidth allocation */
-#define DCB_ERR_TC_BW -4
-/* Traffic class has both link strict and group strict enabled */
-#define DCB_ERR_LS_GS -5
-/* Link strict traffic class has non zero bandwidth */
-#define DCB_ERR_LS_BW_NONZERO -6
-/* Link strict bandwidth group has non zero bandwidth */
-#define DCB_ERR_LS_BWG_NONZERO -7
-/* Traffic class has zero bandwidth */
-#define DCB_ERR_TC_BW_ZERO -8
-
-#define DCB_NOT_IMPLEMENTED 0x7FFFFFFF
-
-struct dcb_pfc_tc_debug {
- u8 tc;
- u8 pause_status;
- u64 pause_quanta;
-};
-
-enum strict_prio_type {
- prio_none = 0,
- prio_group,
- prio_link
-};
-
-/* DCB capability definitions */
-#define IXGBE_DCB_PG_SUPPORT 0x00000001
-#define IXGBE_DCB_PFC_SUPPORT 0x00000002
-#define IXGBE_DCB_BCN_SUPPORT 0x00000004
-#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008
-#define IXGBE_DCB_GSP_SUPPORT 0x00000010
-
-#define IXGBE_DCB_8_TC_SUPPORT 0x80
-
-struct dcb_support {
- /* DCB capabilities */
- u32 capabilities;
-
- /* Each bit represents a number of TCs configurable in the hw.
- * If 8 traffic classes can be configured, the value is 0x80.
- */
- u8 traffic_classes;
- u8 pfc_traffic_classes;
-};
-
-/* Traffic class bandwidth allocation per direction */
-struct tc_bw_alloc {
- u8 bwg_id; /* Bandwidth Group (BWG) ID */
- u8 bwg_percent; /* % of BWG's bandwidth */
- u8 link_percent; /* % of link bandwidth */
- u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */
- u16 data_credits_refill; /* Credit refill amount in 64B granularity */
- u16 data_credits_max; /* Max credits for a configured packet buffer
- * in 64B granularity.*/
- enum strict_prio_type prio_type; /* Link or Group Strict Priority */
-};
-
-enum dcb_pfc_type {
- pfc_disabled = 0,
- pfc_enabled_full,
- pfc_enabled_tx,
- pfc_enabled_rx
-};
-
-/* Traffic class configuration */
-struct tc_configuration {
- struct tc_bw_alloc path[2]; /* One each for Tx/Rx */
- enum dcb_pfc_type dcb_pfc; /* Class based flow control setting */
-
- u16 desc_credits_max; /* For Tx Descriptor arbitration */
- u8 tc; /* Traffic class (TC) */
-};
-
-struct dcb_num_tcs {
- u8 pg_tcs;
- u8 pfc_tcs;
-};
-
-struct ixgbe_dcb_config {
- struct dcb_support support;
- struct dcb_num_tcs num_tcs;
- struct tc_configuration tc_config[MAX_TRAFFIC_CLASS];
- u8 bw_percentage[2][MAX_BW_GROUP]; /* One each for Tx/Rx */
- bool pfc_mode_enable;
-
- u32 dcb_cfg_version; /* Not used...OS-specific? */
- u32 link_speed; /* For bandwidth allocation validation purpose */
-};
-
-/* DCB driver APIs */
-void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en);
-void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *, int, u16 *);
-void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *, u16 *);
-void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *, int, u8 *);
-void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *, int, u8 *);
-
-/* DCB credits calculation */
-s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, __u16 *max, int max_frame);
-s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *,
- struct ixgbe_dcb_config *, int, u8);
-
-/* DCB hw initialization */
-s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, u16 *refill, u16 *max,
- u8 *bwg_id, u8 *prio_type, u8 *tc_prio);
-s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en);
-s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, struct ixgbe_dcb_config *);
-
-/* DCB definitions for credit calculation */
-#define DCB_CREDIT_QUANTUM 64 /* DCB Quantum */
-#define MAX_CREDIT_REFILL 511 /* 0x1FF * 64B = 32704B */
-#define DCB_MAX_TSO_SIZE (32*1024) /* MAX TSO packet size supported in DCB mode */
-#define MINIMUM_CREDIT_FOR_TSO (DCB_MAX_TSO_SIZE/64 + 1) /* 513 for 32KB TSO packet */
-#define MAX_CREDIT 4095 /* Maximum credit supported: 256KB * 1204 / 64B */
-
-#endif /* _DCB_CONFIG_H */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "ixgbe.h"
-#include "ixgbe_type.h"
-#include "ixgbe_dcb.h"
-#include "ixgbe_dcb_82598.h"
-
-/**
- * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure Rx Data Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *prio_type)
-{
- u32 reg = 0;
- u32 credit_refill = 0;
- u32 credit_max = 0;
- u8 i = 0;
-
- reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA;
- IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg);
-
- reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
- /* Enable Arbiter */
- reg &= ~IXGBE_RMCS_ARBDIS;
- /* Enable Receive Recycle within the BWG */
- reg |= IXGBE_RMCS_RRM;
- /* Enable Deficit Fixed Priority arbitration*/
- reg |= IXGBE_RMCS_DFP;
-
- IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- credit_refill = refill[i];
- credit_max = max[i];
-
- reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT);
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_RT2CR_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg);
- }
-
- reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
- reg |= IXGBE_RDRXCTL_RDMTS_1_2;
- reg |= IXGBE_RDRXCTL_MPBEN;
- reg |= IXGBE_RDRXCTL_MCEN;
- IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg);
-
- reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- /* Make sure there is enough descriptors before arbitration */
- reg &= ~IXGBE_RXCTRL_DMBYPS;
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg);
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure Tx Descriptor Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type)
-{
- u32 reg, max_credits;
- u8 i;
-
- reg = IXGBE_READ_REG(hw, IXGBE_DPMCS);
-
- /* Enable arbiter */
- reg &= ~IXGBE_DPMCS_ARBDIS;
- /* Enable DFP and Recycle mode */
- reg |= (IXGBE_DPMCS_TDPAC | IXGBE_DPMCS_TRM);
- reg |= IXGBE_DPMCS_TSOEF;
- /* Configure Max TSO packet size 34KB including payload and headers */
- reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT);
-
- IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg);
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- max_credits = max[i];
- reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT;
- reg |= refill[i];
- reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT;
-
- if (prio_type[i] == prio_group)
- reg |= IXGBE_TDTQ2TCCR_GSP;
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_TDTQ2TCCR_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure Tx Data Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type)
-{
- u32 reg;
- u8 i;
-
- reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
- /* Enable Data Plane Arbiter */
- reg &= ~IXGBE_PDPMCS_ARBDIS;
- /* Enable DFP and Transmit Recycle Mode */
- reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM);
-
- IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg);
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- reg = refill[i];
- reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT;
- reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT;
-
- if (prio_type[i] == prio_group)
- reg |= IXGBE_TDPT2TCCR_GSP;
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_TDPT2TCCR_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg);
- }
-
- /* Enable Tx packet buffer division */
- reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
- reg |= IXGBE_DTXCTL_ENDBUBD;
- IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg);
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_pfc_82598 - Config priority flow control
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure Priority Flow Control for each traffic class.
- */
-s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en)
-{
- u32 reg, rx_pba_size;
- u8 i;
-
- if (pfc_en) {
- /* Enable Transmit Priority Flow Control */
- reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
- reg &= ~IXGBE_RMCS_TFCE_802_3X;
- /* correct the reporting of our flow control status */
- reg |= IXGBE_RMCS_TFCE_PRIORITY;
- IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg);
-
- /* Enable Receive Priority Flow Control */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- reg &= ~IXGBE_FCTRL_RFCE;
- reg |= IXGBE_FCTRL_RPFCE;
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg);
-
- /* Configure pause time */
- for (i = 0; i < (MAX_TRAFFIC_CLASS >> 1); i++)
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), 0x68006800);
-
- /* Configure flow control refresh threshold value */
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400);
- }
-
- /*
- * Configure flow control thresholds and enable priority flow control
- * for each traffic class.
- */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- int enabled = pfc_en & (1 << i);
- rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
- rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
- reg = (rx_pba_size - hw->fc.low_water) << 10;
-
- if (enabled == pfc_enabled_tx ||
- enabled == pfc_enabled_full)
- reg |= IXGBE_FCRTL_XONE;
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg);
-
- reg = (rx_pba_size - hw->fc.high_water) << 10;
- if (enabled == pfc_enabled_tx ||
- enabled == pfc_enabled_full)
- reg |= IXGBE_FCRTH_FCEN;
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics
- * @hw: pointer to hardware structure
- *
- * Configure queue statistics registers, all queues belonging to same traffic
- * class uses a single set of queue statistics counters.
- */
-static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw)
-{
- u32 reg = 0;
- u8 i = 0;
- u8 j = 0;
-
- /* Receive Queues stats setting - 8 queues per statistics reg */
- for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) {
- reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i));
- reg |= ((0x1010101) * j);
- IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
- reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1));
- reg |= ((0x1010101) * j);
- IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg);
- }
- /* Transmit Queues stats setting - 4 queues per statistics reg */
- for (i = 0; i < 8; i++) {
- reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i));
- reg |= ((0x1010101) * i);
- IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_hw_config_82598 - Config and enable DCB
- * @hw: pointer to hardware structure
- * @dcb_config: pointer to ixgbe_dcb_config structure
- *
- * Configure dcb settings and enable dcb mode.
- */
-s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
- u16 *max, u8 *bwg_id, u8 *prio_type)
-{
- ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type);
- ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max,
- bwg_id, prio_type);
- ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max,
- bwg_id, prio_type);
- ixgbe_dcb_config_pfc_82598(hw, pfc_en);
- ixgbe_dcb_config_tc_stats_82598(hw);
-
- return 0;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _DCB_82598_CONFIG_H_
-#define _DCB_82598_CONFIG_H_
-
-/* DCB register definitions */
-
-#define IXGBE_DPMCS_MTSOS_SHIFT 16
-#define IXGBE_DPMCS_TDPAC 0x00000001 /* 0 Round Robin, 1 DFP - Deficit Fixed Priority */
-#define IXGBE_DPMCS_TRM 0x00000010 /* Transmit Recycle Mode */
-#define IXGBE_DPMCS_ARBDIS 0x00000040 /* DCB arbiter disable */
-#define IXGBE_DPMCS_TSOEF 0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */
-
-#define IXGBE_RUPPBMR_MQA 0x80000000 /* Enable UP to queue mapping */
-
-#define IXGBE_RT2CR_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
-#define IXGBE_RT2CR_LSP 0x80000000 /* LSP enable bit */
-
-#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet buffers enable */
-#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores (RSS) enable */
-
-#define IXGBE_TDTQ2TCCR_MCL_SHIFT 12
-#define IXGBE_TDTQ2TCCR_BWG_SHIFT 9
-#define IXGBE_TDTQ2TCCR_GSP 0x40000000
-#define IXGBE_TDTQ2TCCR_LSP 0x80000000
-
-#define IXGBE_TDPT2TCCR_MCL_SHIFT 12
-#define IXGBE_TDPT2TCCR_BWG_SHIFT 9
-#define IXGBE_TDPT2TCCR_GSP 0x40000000
-#define IXGBE_TDPT2TCCR_LSP 0x80000000
-
-#define IXGBE_PDPMCS_TPPAC 0x00000020 /* 0 Round Robin, 1 for DFP - Deficit Fixed Priority */
-#define IXGBE_PDPMCS_ARBDIS 0x00000040 /* Arbiter disable */
-#define IXGBE_PDPMCS_TRM 0x00000100 /* Transmit Recycle Mode enable */
-
-#define IXGBE_DTXCTL_ENDBUBD 0x00000004 /* Enable DBU buffer division */
-
-#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
-#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
-#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
-#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
-
-#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000
-
-/* DCB hardware-specific driver APIs */
-
-/* DCB PFC functions */
-s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8 pfc_en);
-
-/* DCB hw initialization */
-s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *prio_type);
-
-s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type);
-
-s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type);
-
-s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
- u16 *max, u8 *bwg_id, u8 *prio_type);
-
-#endif /* _DCB_82598_CONFIG_H */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "ixgbe.h"
-#include "ixgbe_type.h"
-#include "ixgbe_dcb.h"
-#include "ixgbe_dcb_82599.h"
-
-/**
- * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter
- * @hw: pointer to hardware structure
- * @refill: refill credits index by traffic class
- * @max: max credits index by traffic class
- * @bwg_id: bandwidth grouping indexed by traffic class
- * @prio_type: priority type indexed by traffic class
- *
- * Configure Rx Packet Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type,
- u8 *prio_tc)
-{
- u32 reg = 0;
- u32 credit_refill = 0;
- u32 credit_max = 0;
- u8 i = 0;
-
- /*
- * Disable the arbiter before changing parameters
- * (always enable recycle mode; WSP)
- */
- reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS;
- IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
-
- /* Map all traffic classes to their UP, 1 to 1 */
- reg = 0;
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- reg |= (prio_tc[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT));
- IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- credit_refill = refill[i];
- credit_max = max[i];
- reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT);
-
- reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT;
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_RTRPT4C_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg);
- }
-
- /*
- * Configure Rx packet plane (recycle mode; WSP) and
- * enable arbiter
- */
- reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC;
- IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg);
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter
- * @hw: pointer to hardware structure
- * @refill: refill credits index by traffic class
- * @max: max credits index by traffic class
- * @bwg_id: bandwidth grouping indexed by traffic class
- * @prio_type: priority type indexed by traffic class
- *
- * Configure Tx Descriptor Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type)
-{
- u32 reg, max_credits;
- u8 i;
-
- /* Clear the per-Tx queue credits; we use per-TC instead */
- for (i = 0; i < 128; i++) {
- IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i);
- IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0);
- }
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- max_credits = max[i];
- reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT;
- reg |= refill[i];
- reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT;
-
- if (prio_type[i] == prio_group)
- reg |= IXGBE_RTTDT2C_GSP;
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_RTTDT2C_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg);
- }
-
- /*
- * Configure Tx descriptor plane (recycle mode; WSP) and
- * enable arbiter
- */
- reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM;
- IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg);
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter
- * @hw: pointer to hardware structure
- * @refill: refill credits index by traffic class
- * @max: max credits index by traffic class
- * @bwg_id: bandwidth grouping indexed by traffic class
- * @prio_type: priority type indexed by traffic class
- *
- * Configure Tx Packet Arbiter and credits for each traffic class.
- */
-s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type,
- u8 *prio_tc)
-{
- u32 reg;
- u8 i;
-
- /*
- * Disable the arbiter before changing parameters
- * (always enable recycle mode; SP; arb delay)
- */
- reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
- (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) |
- IXGBE_RTTPCS_ARBDIS;
- IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
-
- /* Map all traffic classes to their UP, 1 to 1 */
- reg = 0;
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- reg |= (prio_tc[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT));
- IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg);
-
- /* Configure traffic class credits and priority */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- reg = refill[i];
- reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT;
- reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT;
-
- if (prio_type[i] == prio_group)
- reg |= IXGBE_RTTPT2C_GSP;
-
- if (prio_type[i] == prio_link)
- reg |= IXGBE_RTTPT2C_LSP;
-
- IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg);
- }
-
- /*
- * Configure Tx packet plane (recycle mode; SP; arb delay) and
- * enable arbiter
- */
- reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM |
- (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT);
- IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg);
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_pfc_82599 - Configure priority flow control
- * @hw: pointer to hardware structure
- * @pfc_en: enabled pfc bitmask
- *
- * Configure Priority Flow Control (PFC) for each traffic class.
- */
-s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en)
-{
- u32 i, reg, rx_pba_size;
-
- /* Configure PFC Tx thresholds per TC */
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- int enabled = pfc_en & (1 << i);
- rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
- rx_pba_size >>= IXGBE_RXPBSIZE_SHIFT;
-
- reg = (rx_pba_size - hw->fc.low_water) << 10;
-
- if (enabled)
- reg |= IXGBE_FCRTL_XONE;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg);
-
- reg = (rx_pba_size - hw->fc.high_water) << 10;
- if (enabled)
- reg |= IXGBE_FCRTH_FCEN;
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg);
- }
-
- if (pfc_en) {
- /* Configure pause time (2 TCs per register) */
- reg = hw->fc.pause_time | (hw->fc.pause_time << 16);
- for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++)
- IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg);
-
- /* Configure flow control refresh threshold value */
- IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2);
-
-
- reg = IXGBE_FCCFG_TFCE_PRIORITY;
- IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg);
- /*
- * Enable Receive PFC
- * 82599 will always honor XOFF frames we receive when
- * we are in PFC mode however X540 only honors enabled
- * traffic classes.
- */
- reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- reg &= ~IXGBE_MFLCN_RFCE;
- reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF;
-
- if (hw->mac.type == ixgbe_mac_X540)
- reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT;
-
- IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg);
-
- } else {
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- hw->mac.ops.fc_enable(hw, i);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics
- * @hw: pointer to hardware structure
- *
- * Configure queue statistics registers, all queues belonging to same traffic
- * class uses a single set of queue statistics counters.
- */
-static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw)
-{
- u32 reg = 0;
- u8 i = 0;
-
- /*
- * Receive Queues stats setting
- * 32 RQSMR registers, each configuring 4 queues.
- * Set all 16 queues of each TC to the same stat
- * with TC 'n' going to stat 'n'.
- */
- for (i = 0; i < 32; i++) {
- reg = 0x01010101 * (i / 4);
- IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg);
- }
- /*
- * Transmit Queues stats setting
- * 32 TQSM registers, each controlling 4 queues.
- * Set all queues of each TC to the same stat
- * with TC 'n' going to stat 'n'.
- * Tx queues are allocated non-uniformly to TCs:
- * 32, 32, 16, 16, 8, 8, 8, 8.
- */
- for (i = 0; i < 32; i++) {
- if (i < 8)
- reg = 0x00000000;
- else if (i < 16)
- reg = 0x01010101;
- else if (i < 20)
- reg = 0x02020202;
- else if (i < 24)
- reg = 0x03030303;
- else if (i < 26)
- reg = 0x04040404;
- else if (i < 28)
- reg = 0x05050505;
- else if (i < 30)
- reg = 0x06060606;
- else
- reg = 0x07070707;
- IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_dcb_hw_config_82599 - Configure and enable DCB
- * @hw: pointer to hardware structure
- * @refill: refill credits index by traffic class
- * @max: max credits index by traffic class
- * @bwg_id: bandwidth grouping indexed by traffic class
- * @prio_type: priority type indexed by traffic class
- * @pfc_en: enabled pfc bitmask
- *
- * Configure dcb settings and enable dcb mode.
- */
-s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
- u16 *max, u8 *bwg_id, u8 *prio_type, u8 *prio_tc)
-{
- ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id,
- prio_type, prio_tc);
- ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max,
- bwg_id, prio_type);
- ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max,
- bwg_id, prio_type, prio_tc);
- ixgbe_dcb_config_pfc_82599(hw, pfc_en);
- ixgbe_dcb_config_tc_stats_82599(hw);
-
- return 0;
-}
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _DCB_82599_CONFIG_H_
-#define _DCB_82599_CONFIG_H_
-
-/* DCB register definitions */
-#define IXGBE_RTTDCS_TDPAC 0x00000001 /* 0 Round Robin,
- * 1 WSP - Weighted Strict Priority
- */
-#define IXGBE_RTTDCS_VMPAC 0x00000002 /* 0 Round Robin,
- * 1 WRR - Weighted Round Robin
- */
-#define IXGBE_RTTDCS_TDRM 0x00000010 /* Transmit Recycle Mode */
-#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */
-#define IXGBE_RTTDCS_BDPM 0x00400000 /* Bypass Data Pipe - must clear! */
-#define IXGBE_RTTDCS_BPBFSM 0x00800000 /* Bypass PB Free Space - must
- * clear!
- */
-#define IXGBE_RTTDCS_SPEED_CHG 0x80000000 /* Link speed change */
-
-/* Receive UP2TC mapping */
-#define IXGBE_RTRUP2TC_UP_SHIFT 3
-/* Transmit UP2TC mapping */
-#define IXGBE_RTTUP2TC_UP_SHIFT 3
-
-#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */
-#define IXGBE_RTRPT4C_BWG_SHIFT 9 /* Offset to BWG index */
-#define IXGBE_RTRPT4C_GSP 0x40000000 /* GSP enable bit */
-#define IXGBE_RTRPT4C_LSP 0x80000000 /* LSP enable bit */
-
-#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet
- * buffers enable
- */
-#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores
- * (RSS) enable
- */
-
-/* RTRPCS Bit Masks */
-#define IXGBE_RTRPCS_RRM 0x00000002 /* Receive Recycle Mode enable */
-/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
-#define IXGBE_RTRPCS_RAC 0x00000004
-#define IXGBE_RTRPCS_ARBDIS 0x00000040 /* Arbitration disable bit */
-
-/* RTTDT2C Bit Masks */
-#define IXGBE_RTTDT2C_MCL_SHIFT 12
-#define IXGBE_RTTDT2C_BWG_SHIFT 9
-#define IXGBE_RTTDT2C_GSP 0x40000000
-#define IXGBE_RTTDT2C_LSP 0x80000000
-
-#define IXGBE_RTTPT2C_MCL_SHIFT 12
-#define IXGBE_RTTPT2C_BWG_SHIFT 9
-#define IXGBE_RTTPT2C_GSP 0x40000000
-#define IXGBE_RTTPT2C_LSP 0x80000000
-
-/* RTTPCS Bit Masks */
-#define IXGBE_RTTPCS_TPPAC 0x00000020 /* 0 Round Robin,
- * 1 SP - Strict Priority
- */
-#define IXGBE_RTTPCS_ARBDIS 0x00000040 /* Arbiter disable */
-#define IXGBE_RTTPCS_TPRM 0x00000100 /* Transmit Recycle Mode enable */
-#define IXGBE_RTTPCS_ARBD_SHIFT 22
-#define IXGBE_RTTPCS_ARBD_DCB 0x4 /* Arbitration delay in DCB mode */
-
-/* SECTXMINIFG DCB */
-#define IXGBE_SECTX_DCB 0x00001F00 /* DCB TX Buffer IFG */
-
-
-/* DCB hardware-specific driver APIs */
-
-/* DCB PFC functions */
-s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en);
-
-/* DCB hw initialization */
-s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type,
- u8 *prio_tc);
-
-s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type);
-
-s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw,
- u16 *refill,
- u16 *max,
- u8 *bwg_id,
- u8 *prio_type,
- u8 *prio_tc);
-
-s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill,
- u16 *max, u8 *bwg_id, u8 *prio_type,
- u8 *prio_tc);
-
-#endif /* _DCB_82599_CONFIG_H */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- Linux NICS <linux.nics@intel.com>
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "ixgbe.h"
-#include <linux/dcbnl.h>
-#include "ixgbe_dcb_82598.h"
-#include "ixgbe_dcb_82599.h"
-
-/* Callbacks for DCB netlink in the kernel */
-#define BIT_DCB_MODE 0x01
-#define BIT_PFC 0x02
-#define BIT_PG_RX 0x04
-#define BIT_PG_TX 0x08
-#define BIT_APP_UPCHG 0x10
-#define BIT_LINKSPEED 0x80
-
-/* Responses for the DCB_C_SET_ALL command */
-#define DCB_HW_CHG_RST 0 /* DCB configuration changed with reset */
-#define DCB_NO_HW_CHG 1 /* DCB configuration did not change */
-#define DCB_HW_CHG 2 /* DCB configuration changed, no reset */
-
-int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
- struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max)
-{
- struct tc_configuration *src_tc_cfg = NULL;
- struct tc_configuration *dst_tc_cfg = NULL;
- int i;
-
- if (!src_dcb_cfg || !dst_dcb_cfg)
- return -EINVAL;
-
- for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) {
- src_tc_cfg = &src_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0];
- dst_tc_cfg = &dst_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0];
-
- dst_tc_cfg->path[DCB_TX_CONFIG].prio_type =
- src_tc_cfg->path[DCB_TX_CONFIG].prio_type;
-
- dst_tc_cfg->path[DCB_TX_CONFIG].bwg_id =
- src_tc_cfg->path[DCB_TX_CONFIG].bwg_id;
-
- dst_tc_cfg->path[DCB_TX_CONFIG].bwg_percent =
- src_tc_cfg->path[DCB_TX_CONFIG].bwg_percent;
-
- dst_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap =
- src_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap;
-
- dst_tc_cfg->path[DCB_RX_CONFIG].prio_type =
- src_tc_cfg->path[DCB_RX_CONFIG].prio_type;
-
- dst_tc_cfg->path[DCB_RX_CONFIG].bwg_id =
- src_tc_cfg->path[DCB_RX_CONFIG].bwg_id;
-
- dst_tc_cfg->path[DCB_RX_CONFIG].bwg_percent =
- src_tc_cfg->path[DCB_RX_CONFIG].bwg_percent;
-
- dst_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap =
- src_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap;
- }
-
- for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) {
- dst_dcb_cfg->bw_percentage[DCB_TX_CONFIG]
- [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage
- [DCB_TX_CONFIG][i-DCB_PG_ATTR_BW_ID_0];
- dst_dcb_cfg->bw_percentage[DCB_RX_CONFIG]
- [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage
- [DCB_RX_CONFIG][i-DCB_PG_ATTR_BW_ID_0];
- }
-
- for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) {
- dst_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc =
- src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc;
- }
-
- dst_dcb_cfg->pfc_mode_enable = src_dcb_cfg->pfc_mode_enable;
-
- return 0;
-}
-
-static u8 ixgbe_dcbnl_get_state(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED);
-}
-
-static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
-{
- u8 err = 0;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- /* verify there is something to do, if not then exit */
- if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
- return err;
-
- if (state > 0) {
- /* Turn on DCB */
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
- e_err(drv, "Enable failed, needs MSI-X\n");
- err = 1;
- goto out;
- }
-
- adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- adapter->last_lfc_mode = adapter->hw.fc.current_mode;
- adapter->hw.fc.requested_mode = ixgbe_fc_none;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- break;
- default:
- break;
- }
-
- ixgbe_setup_tc(netdev, MAX_TRAFFIC_CLASS);
- } else {
- /* Turn off DCB */
- adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
- adapter->temp_dcb_cfg.pfc_mode_enable = false;
- adapter->dcb_cfg.pfc_mode_enable = false;
- adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
- adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
- break;
- default:
- break;
- }
- ixgbe_setup_tc(netdev, 0);
- }
-
-out:
- return err;
-}
-
-static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev,
- u8 *perm_addr)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int i, j;
-
- memset(perm_addr, 0xff, MAX_ADDR_LEN);
-
- for (i = 0; i < netdev->addr_len; i++)
- perm_addr[i] = adapter->hw.mac.perm_addr[i];
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- for (j = 0; j < netdev->addr_len; j++, i++)
- perm_addr[i] = adapter->hw.mac.san_addr[j];
- break;
- default:
- break;
- }
-}
-
-static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc,
- u8 prio, u8 bwg_id, u8 bw_pct,
- u8 up_map)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- if (prio != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type = prio;
- if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id = bwg_id;
- if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent =
- bw_pct;
- if (up_map != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap =
- up_map;
-
- if ((adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type !=
- adapter->dcb_cfg.tc_config[tc].path[0].prio_type) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id !=
- adapter->dcb_cfg.tc_config[tc].path[0].bwg_id) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent !=
- adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap !=
- adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap))
- adapter->dcb_set_bitmap |= BIT_PG_TX;
-}
-
-static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
- u8 bw_pct)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct;
-
- if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
- adapter->dcb_cfg.bw_percentage[0][bwg_id])
- adapter->dcb_set_bitmap |= BIT_PG_TX;
-}
-
-static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc,
- u8 prio, u8 bwg_id, u8 bw_pct,
- u8 up_map)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- if (prio != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type = prio;
- if (bwg_id != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id = bwg_id;
- if (bw_pct != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent =
- bw_pct;
- if (up_map != DCB_ATTR_VALUE_UNDEFINED)
- adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap =
- up_map;
-
- if ((adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type !=
- adapter->dcb_cfg.tc_config[tc].path[1].prio_type) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id !=
- adapter->dcb_cfg.tc_config[tc].path[1].bwg_id) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent !=
- adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) ||
- (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap !=
- adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap))
- adapter->dcb_set_bitmap |= BIT_PG_RX;
-}
-
-static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
- u8 bw_pct)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct;
-
- if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] !=
- adapter->dcb_cfg.bw_percentage[1][bwg_id])
- adapter->dcb_set_bitmap |= BIT_PG_RX;
-}
-
-static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc,
- u8 *prio, u8 *bwg_id, u8 *bw_pct,
- u8 *up_map)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- *prio = adapter->dcb_cfg.tc_config[tc].path[0].prio_type;
- *bwg_id = adapter->dcb_cfg.tc_config[tc].path[0].bwg_id;
- *bw_pct = adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent;
- *up_map = adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap;
-}
-
-static void ixgbe_dcbnl_get_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
- u8 *bw_pct)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- *bw_pct = adapter->dcb_cfg.bw_percentage[0][bwg_id];
-}
-
-static void ixgbe_dcbnl_get_pg_tc_cfg_rx(struct net_device *netdev, int tc,
- u8 *prio, u8 *bwg_id, u8 *bw_pct,
- u8 *up_map)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- *prio = adapter->dcb_cfg.tc_config[tc].path[1].prio_type;
- *bwg_id = adapter->dcb_cfg.tc_config[tc].path[1].bwg_id;
- *bw_pct = adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent;
- *up_map = adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap;
-}
-
-static void ixgbe_dcbnl_get_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id,
- u8 *bw_pct)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- *bw_pct = adapter->dcb_cfg.bw_percentage[1][bwg_id];
-}
-
-static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority,
- u8 setting)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting;
- if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc !=
- adapter->dcb_cfg.tc_config[priority].dcb_pfc) {
- adapter->dcb_set_bitmap |= BIT_PFC;
- adapter->temp_dcb_cfg.pfc_mode_enable = true;
- }
-}
-
-static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority,
- u8 *setting)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc;
-}
-
-static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int ret;
-#ifdef IXGBE_FCOE
- struct dcb_app app = {
- .selector = DCB_APP_IDTYPE_ETHTYPE,
- .protocol = ETH_P_FCOE,
- };
- u8 up = dcb_getapp(netdev, &app);
-#endif
-
- ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
- MAX_TRAFFIC_CLASS);
- if (ret)
- return DCB_NO_HW_CHG;
-
-#ifdef IXGBE_FCOE
- if (up && (up != (1 << adapter->fcoe.up)))
- adapter->dcb_set_bitmap |= BIT_APP_UPCHG;
-
- /*
- * Only take down the adapter if an app change occurred. FCoE
- * may shuffle tx rings in this case and this can not be done
- * without a reset currently.
- */
- if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
- while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
-
- adapter->fcoe.up = ffs(up) - 1;
-
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_stop(netdev);
- ixgbe_clear_interrupt_scheme(adapter);
- }
-#endif
-
- if (adapter->dcb_cfg.pfc_mode_enable) {
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- if (adapter->hw.fc.current_mode != ixgbe_fc_pfc)
- adapter->last_lfc_mode =
- adapter->hw.fc.current_mode;
- break;
- default:
- break;
- }
- adapter->hw.fc.requested_mode = ixgbe_fc_pfc;
- } else {
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- adapter->hw.fc.requested_mode = ixgbe_fc_none;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- adapter->hw.fc.requested_mode = adapter->last_lfc_mode;
- break;
- default:
- break;
- }
- }
-
-#ifdef IXGBE_FCOE
- if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) {
- ixgbe_init_interrupt_scheme(adapter);
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_open(netdev);
- ret = DCB_HW_CHG_RST;
- }
-#endif
-
- if (adapter->dcb_set_bitmap & BIT_PFC) {
- u8 pfc_en;
- ixgbe_dcb_unpack_pfc(&adapter->dcb_cfg, &pfc_en);
- ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc_en);
- ret = DCB_HW_CHG;
- }
-
- if (adapter->dcb_set_bitmap & (BIT_PG_TX|BIT_PG_RX)) {
- u16 refill[MAX_TRAFFIC_CLASS], max[MAX_TRAFFIC_CLASS];
- u8 bwg_id[MAX_TRAFFIC_CLASS], prio_type[MAX_TRAFFIC_CLASS];
- /* Priority to TC mapping in CEE case default to 1:1 */
- u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
- int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
-
-#ifdef CONFIG_FCOE
- if (adapter->netdev->features & NETIF_F_FCOE_MTU)
- max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
-#endif
-
- ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg,
- max_frame, DCB_TX_CONFIG);
- ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg,
- max_frame, DCB_RX_CONFIG);
-
- ixgbe_dcb_unpack_refill(&adapter->dcb_cfg,
- DCB_TX_CONFIG, refill);
- ixgbe_dcb_unpack_max(&adapter->dcb_cfg, max);
- ixgbe_dcb_unpack_bwgid(&adapter->dcb_cfg,
- DCB_TX_CONFIG, bwg_id);
- ixgbe_dcb_unpack_prio(&adapter->dcb_cfg,
- DCB_TX_CONFIG, prio_type);
-
- ixgbe_dcb_hw_ets_config(&adapter->hw, refill, max,
- bwg_id, prio_type, prio_tc);
- }
-
- if (adapter->dcb_cfg.pfc_mode_enable)
- adapter->hw.fc.current_mode = ixgbe_fc_pfc;
-
- if (adapter->dcb_set_bitmap & BIT_APP_UPCHG)
- clear_bit(__IXGBE_RESETTING, &adapter->state);
- adapter->dcb_set_bitmap = 0x00;
- return ret;
-}
-
-static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- switch (capid) {
- case DCB_CAP_ATTR_PG:
- *cap = true;
- break;
- case DCB_CAP_ATTR_PFC:
- *cap = true;
- break;
- case DCB_CAP_ATTR_UP2TC:
- *cap = false;
- break;
- case DCB_CAP_ATTR_PG_TCS:
- *cap = 0x80;
- break;
- case DCB_CAP_ATTR_PFC_TCS:
- *cap = 0x80;
- break;
- case DCB_CAP_ATTR_GSP:
- *cap = true;
- break;
- case DCB_CAP_ATTR_BCN:
- *cap = false;
- break;
- case DCB_CAP_ATTR_DCBX:
- *cap = adapter->dcbx_cap;
- break;
- default:
- *cap = false;
- break;
- }
-
- return 0;
-}
-
-static u8 ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- u8 rval = 0;
-
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- switch (tcid) {
- case DCB_NUMTCS_ATTR_PG:
- *num = MAX_TRAFFIC_CLASS;
- break;
- case DCB_NUMTCS_ATTR_PFC:
- *num = MAX_TRAFFIC_CLASS;
- break;
- default:
- rval = -EINVAL;
- break;
- }
- } else {
- rval = -EINVAL;
- }
-
- return rval;
-}
-
-static u8 ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num)
-{
- return -EINVAL;
-}
-
-static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- return adapter->dcb_cfg.pfc_mode_enable;
-}
-
-static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->temp_dcb_cfg.pfc_mode_enable = state;
- if (adapter->temp_dcb_cfg.pfc_mode_enable !=
- adapter->dcb_cfg.pfc_mode_enable)
- adapter->dcb_set_bitmap |= BIT_PFC;
-}
-
-/**
- * ixgbe_dcbnl_getapp - retrieve the DCBX application user priority
- * @netdev : the corresponding netdev
- * @idtype : identifies the id as ether type or TCP/UDP port number
- * @id: id is either ether type or TCP/UDP port number
- *
- * Returns : on success, returns a non-zero 802.1p user priority bitmap
- * otherwise returns 0 as the invalid user priority bitmap to indicate an
- * error.
- */
-static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct dcb_app app = {
- .selector = idtype,
- .protocol = id,
- };
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE))
- return 0;
-
- return dcb_getapp(netdev, &app);
-}
-
-static int ixgbe_dcbnl_ieee_getets(struct net_device *dev,
- struct ieee_ets *ets)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets;
-
- /* No IEEE PFC settings available */
- if (!my_ets)
- return -EINVAL;
-
- ets->ets_cap = MAX_TRAFFIC_CLASS;
- ets->cbs = my_ets->cbs;
- memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw));
- memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw));
- memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa));
- memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc));
- return 0;
-}
-
-static int ixgbe_dcbnl_ieee_setets(struct net_device *dev,
- struct ieee_ets *ets)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- __u16 refill[IEEE_8021QAZ_MAX_TCS], max[IEEE_8021QAZ_MAX_TCS];
- __u8 prio_type[IEEE_8021QAZ_MAX_TCS];
- int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
- int i, err;
- __u64 *p = (__u64 *) ets->prio_tc;
- /* naively give each TC a bwg to map onto CEE hardware */
- __u8 bwg_id[IEEE_8021QAZ_MAX_TCS] = {0, 1, 2, 3, 4, 5, 6, 7};
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
- return -EINVAL;
-
- if (!adapter->ixgbe_ieee_ets) {
- adapter->ixgbe_ieee_ets = kmalloc(sizeof(struct ieee_ets),
- GFP_KERNEL);
- if (!adapter->ixgbe_ieee_ets)
- return -ENOMEM;
- }
-
- memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets));
-
- /* Map TSA onto CEE prio type */
- for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) {
- switch (ets->tc_tsa[i]) {
- case IEEE_8021QAZ_TSA_STRICT:
- prio_type[i] = 2;
- break;
- case IEEE_8021QAZ_TSA_ETS:
- prio_type[i] = 0;
- break;
- default:
- /* Hardware only supports priority strict or
- * ETS transmission selection algorithms if
- * we receive some other value from dcbnl
- * throw an error
- */
- return -EINVAL;
- }
- }
-
- if (*p)
- ixgbe_dcbnl_set_state(dev, 1);
- else
- ixgbe_dcbnl_set_state(dev, 0);
-
- ixgbe_ieee_credits(ets->tc_tx_bw, refill, max, max_frame);
- err = ixgbe_dcb_hw_ets_config(&adapter->hw, refill, max,
- bwg_id, prio_type, ets->prio_tc);
- return err;
-}
-
-static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev,
- struct ieee_pfc *pfc)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc;
- int i;
-
- /* No IEEE PFC settings available */
- if (!my_pfc)
- return -EINVAL;
-
- pfc->pfc_cap = MAX_TRAFFIC_CLASS;
- pfc->pfc_en = my_pfc->pfc_en;
- pfc->mbc = my_pfc->mbc;
- pfc->delay = my_pfc->delay;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- pfc->requests[i] = adapter->stats.pxoffrxc[i];
- pfc->indications[i] = adapter->stats.pxofftxc[i];
- }
-
- return 0;
-}
-
-static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev,
- struct ieee_pfc *pfc)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int err;
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
- return -EINVAL;
-
- if (!adapter->ixgbe_ieee_pfc) {
- adapter->ixgbe_ieee_pfc = kmalloc(sizeof(struct ieee_pfc),
- GFP_KERNEL);
- if (!adapter->ixgbe_ieee_pfc)
- return -ENOMEM;
- }
-
- memcpy(adapter->ixgbe_ieee_pfc, pfc, sizeof(*adapter->ixgbe_ieee_pfc));
- err = ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en);
- return err;
-}
-
-#ifdef IXGBE_FCOE
-static void ixgbe_dcbnl_devreset(struct net_device *dev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
-
- if (netif_running(dev))
- dev->netdev_ops->ndo_stop(dev);
-
- ixgbe_clear_interrupt_scheme(adapter);
- ixgbe_init_interrupt_scheme(adapter);
-
- if (netif_running(dev))
- dev->netdev_ops->ndo_open(dev);
-}
-#endif
-
-static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev,
- struct dcb_app *app)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int err = -EINVAL;
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
- return err;
-
- err = dcb_ieee_setapp(dev, app);
-
-#ifdef IXGBE_FCOE
- if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
- app->protocol == ETH_P_FCOE) {
- u8 app_mask = dcb_ieee_getapp_mask(dev, app);
-
- if (app_mask & (1 << adapter->fcoe.up))
- return err;
-
- adapter->fcoe.up = app->priority;
- ixgbe_dcbnl_devreset(dev);
- }
-#endif
- return 0;
-}
-
-static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev,
- struct dcb_app *app)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int err;
-
- if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE))
- return -EINVAL;
-
- err = dcb_ieee_delapp(dev, app);
-
-#ifdef IXGBE_FCOE
- if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE &&
- app->protocol == ETH_P_FCOE) {
- u8 app_mask = dcb_ieee_getapp_mask(dev, app);
-
- if (app_mask & (1 << adapter->fcoe.up))
- return err;
-
- adapter->fcoe.up = app_mask ?
- ffs(app_mask) - 1 : IXGBE_FCOE_DEFTC;
- ixgbe_dcbnl_devreset(dev);
- }
-#endif
- return err;
-}
-
-static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- return adapter->dcbx_cap;
-}
-
-static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ieee_ets ets = {0};
- struct ieee_pfc pfc = {0};
-
- /* no support for LLD_MANAGED modes or CEE+IEEE */
- if ((mode & DCB_CAP_DCBX_LLD_MANAGED) ||
- ((mode & DCB_CAP_DCBX_VER_IEEE) && (mode & DCB_CAP_DCBX_VER_CEE)) ||
- !(mode & DCB_CAP_DCBX_HOST))
- return 1;
-
- if (mode == adapter->dcbx_cap)
- return 0;
-
- adapter->dcbx_cap = mode;
-
- /* ETS and PFC defaults */
- ets.ets_cap = 8;
- pfc.pfc_cap = 8;
-
- if (mode & DCB_CAP_DCBX_VER_IEEE) {
- ixgbe_dcbnl_ieee_setets(dev, &ets);
- ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
- } else if (mode & DCB_CAP_DCBX_VER_CEE) {
- adapter->dcb_set_bitmap |= (BIT_PFC & BIT_PG_TX & BIT_PG_RX);
- ixgbe_dcbnl_set_all(dev);
- } else {
- /* Drop into single TC mode strict priority as this
- * indicates CEE and IEEE versions are disabled
- */
- ixgbe_dcbnl_ieee_setets(dev, &ets);
- ixgbe_dcbnl_ieee_setpfc(dev, &pfc);
- ixgbe_dcbnl_set_state(dev, 0);
- }
-
- return 0;
-}
-
-const struct dcbnl_rtnl_ops dcbnl_ops = {
- .ieee_getets = ixgbe_dcbnl_ieee_getets,
- .ieee_setets = ixgbe_dcbnl_ieee_setets,
- .ieee_getpfc = ixgbe_dcbnl_ieee_getpfc,
- .ieee_setpfc = ixgbe_dcbnl_ieee_setpfc,
- .ieee_setapp = ixgbe_dcbnl_ieee_setapp,
- .ieee_delapp = ixgbe_dcbnl_ieee_delapp,
- .getstate = ixgbe_dcbnl_get_state,
- .setstate = ixgbe_dcbnl_set_state,
- .getpermhwaddr = ixgbe_dcbnl_get_perm_hw_addr,
- .setpgtccfgtx = ixgbe_dcbnl_set_pg_tc_cfg_tx,
- .setpgbwgcfgtx = ixgbe_dcbnl_set_pg_bwg_cfg_tx,
- .setpgtccfgrx = ixgbe_dcbnl_set_pg_tc_cfg_rx,
- .setpgbwgcfgrx = ixgbe_dcbnl_set_pg_bwg_cfg_rx,
- .getpgtccfgtx = ixgbe_dcbnl_get_pg_tc_cfg_tx,
- .getpgbwgcfgtx = ixgbe_dcbnl_get_pg_bwg_cfg_tx,
- .getpgtccfgrx = ixgbe_dcbnl_get_pg_tc_cfg_rx,
- .getpgbwgcfgrx = ixgbe_dcbnl_get_pg_bwg_cfg_rx,
- .setpfccfg = ixgbe_dcbnl_set_pfc_cfg,
- .getpfccfg = ixgbe_dcbnl_get_pfc_cfg,
- .setall = ixgbe_dcbnl_set_all,
- .getcap = ixgbe_dcbnl_getcap,
- .getnumtcs = ixgbe_dcbnl_getnumtcs,
- .setnumtcs = ixgbe_dcbnl_setnumtcs,
- .getpfcstate = ixgbe_dcbnl_getpfcstate,
- .setpfcstate = ixgbe_dcbnl_setpfcstate,
- .getapp = ixgbe_dcbnl_getapp,
- .getdcbx = ixgbe_dcbnl_getdcbx,
- .setdcbx = ixgbe_dcbnl_setdcbx,
-};
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for ixgbe */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/vmalloc.h>
-#include <linux/uaccess.h>
-
-#include "ixgbe.h"
-
-
-#define IXGBE_ALL_RAR_ENTRIES 16
-
-enum {NETDEV_STATS, IXGBE_STATS};
-
-struct ixgbe_stats {
- char stat_string[ETH_GSTRING_LEN];
- int type;
- int sizeof_stat;
- int stat_offset;
-};
-
-#define IXGBE_STAT(m) IXGBE_STATS, \
- sizeof(((struct ixgbe_adapter *)0)->m), \
- offsetof(struct ixgbe_adapter, m)
-#define IXGBE_NETDEV_STAT(m) NETDEV_STATS, \
- sizeof(((struct rtnl_link_stats64 *)0)->m), \
- offsetof(struct rtnl_link_stats64, m)
-
-static struct ixgbe_stats ixgbe_gstrings_stats[] = {
- {"rx_packets", IXGBE_NETDEV_STAT(rx_packets)},
- {"tx_packets", IXGBE_NETDEV_STAT(tx_packets)},
- {"rx_bytes", IXGBE_NETDEV_STAT(rx_bytes)},
- {"tx_bytes", IXGBE_NETDEV_STAT(tx_bytes)},
- {"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
- {"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
- {"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
- {"tx_bytes_nic", IXGBE_STAT(stats.gotc)},
- {"lsc_int", IXGBE_STAT(lsc_int)},
- {"tx_busy", IXGBE_STAT(tx_busy)},
- {"non_eop_descs", IXGBE_STAT(non_eop_descs)},
- {"rx_errors", IXGBE_NETDEV_STAT(rx_errors)},
- {"tx_errors", IXGBE_NETDEV_STAT(tx_errors)},
- {"rx_dropped", IXGBE_NETDEV_STAT(rx_dropped)},
- {"tx_dropped", IXGBE_NETDEV_STAT(tx_dropped)},
- {"multicast", IXGBE_NETDEV_STAT(multicast)},
- {"broadcast", IXGBE_STAT(stats.bprc)},
- {"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) },
- {"collisions", IXGBE_NETDEV_STAT(collisions)},
- {"rx_over_errors", IXGBE_NETDEV_STAT(rx_over_errors)},
- {"rx_crc_errors", IXGBE_NETDEV_STAT(rx_crc_errors)},
- {"rx_frame_errors", IXGBE_NETDEV_STAT(rx_frame_errors)},
- {"hw_rsc_aggregated", IXGBE_STAT(rsc_total_count)},
- {"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)},
- {"fdir_match", IXGBE_STAT(stats.fdirmatch)},
- {"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
- {"fdir_overflow", IXGBE_STAT(fdir_overflow)},
- {"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)},
- {"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)},
- {"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)},
- {"tx_carrier_errors", IXGBE_NETDEV_STAT(tx_carrier_errors)},
- {"tx_fifo_errors", IXGBE_NETDEV_STAT(tx_fifo_errors)},
- {"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)},
- {"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
- {"tx_restart_queue", IXGBE_STAT(restart_queue)},
- {"rx_long_length_errors", IXGBE_STAT(stats.roc)},
- {"rx_short_length_errors", IXGBE_STAT(stats.ruc)},
- {"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)},
- {"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)},
- {"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)},
- {"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)},
- {"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)},
- {"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)},
- {"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)},
- {"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)},
- {"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)},
- {"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)},
- {"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)},
- {"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)},
-#ifdef IXGBE_FCOE
- {"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)},
- {"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)},
- {"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)},
- {"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)},
- {"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)},
- {"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)},
-#endif /* IXGBE_FCOE */
-};
-
-#define IXGBE_QUEUE_STATS_LEN \
- ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \
- ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \
- (sizeof(struct ixgbe_queue_stats) / sizeof(u64)))
-#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
-#define IXGBE_PB_STATS_LEN ( \
- (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \
- IXGBE_FLAG_DCB_ENABLED) ? \
- (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \
- sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \
- / sizeof(u64) : 0)
-#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \
- IXGBE_PB_STATS_LEN + \
- IXGBE_QUEUE_STATS_LEN)
-
-static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
- "Register test (offline)", "Eeprom test (offline)",
- "Interrupt test (offline)", "Loopback test (offline)",
- "Link test (on/offline)"
-};
-#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN
-
-static int ixgbe_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed = 0;
- bool link_up;
-
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->autoneg = AUTONEG_ENABLE;
- ecmd->transceiver = XCVR_EXTERNAL;
- if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->phy.multispeed_fiber)) {
- ecmd->supported |= (SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg);
-
- switch (hw->mac.type) {
- case ixgbe_mac_X540:
- ecmd->supported |= SUPPORTED_100baseT_Full;
- break;
- default:
- break;
- }
-
- ecmd->advertising = ADVERTISED_Autoneg;
- if (hw->phy.autoneg_advertised) {
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_100_FULL)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_10GB_FULL)
- ecmd->advertising |= ADVERTISED_10000baseT_Full;
- if (hw->phy.autoneg_advertised &
- IXGBE_LINK_SPEED_1GB_FULL)
- ecmd->advertising |= ADVERTISED_1000baseT_Full;
- } else {
- /*
- * Default advertised modes in case
- * phy.autoneg_advertised isn't set.
- */
- ecmd->advertising |= (ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full);
- if (hw->mac.type == ixgbe_mac_X540)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
- }
-
- if (hw->phy.media_type == ixgbe_media_type_copper) {
- ecmd->supported |= SUPPORTED_TP;
- ecmd->advertising |= ADVERTISED_TP;
- ecmd->port = PORT_TP;
- } else {
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising |= ADVERTISED_FIBRE;
- ecmd->port = PORT_FIBRE;
- }
- } else if (hw->phy.media_type == ixgbe_media_type_backplane) {
- /* Set as FIBRE until SERDES defined in kernel */
- if (hw->device_id == IXGBE_DEV_ID_82598_BX) {
- ecmd->supported = (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE);
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- ecmd->autoneg = AUTONEG_DISABLE;
- } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) ||
- (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) {
- ecmd->supported |= (SUPPORTED_1000baseT_Full |
- SUPPORTED_Autoneg |
- SUPPORTED_FIBRE);
- ecmd->advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_Autoneg |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- } else {
- ecmd->supported |= (SUPPORTED_1000baseT_Full |
- SUPPORTED_FIBRE);
- ecmd->advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- }
- } else {
- ecmd->supported |= SUPPORTED_FIBRE;
- ecmd->advertising = (ADVERTISED_10000baseT_Full |
- ADVERTISED_FIBRE);
- ecmd->port = PORT_FIBRE;
- ecmd->autoneg = AUTONEG_DISABLE;
- }
-
- /* Get PHY type */
- switch (adapter->hw.phy.type) {
- case ixgbe_phy_tn:
- case ixgbe_phy_aq:
- case ixgbe_phy_cu_unknown:
- /* Copper 10G-BASET */
- ecmd->port = PORT_TP;
- break;
- case ixgbe_phy_qt:
- ecmd->port = PORT_FIBRE;
- break;
- case ixgbe_phy_nl:
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- switch (adapter->hw.phy.sfp_type) {
- /* SFP+ devices, further checking needed */
- case ixgbe_sfp_type_da_cu:
- case ixgbe_sfp_type_da_cu_core0:
- case ixgbe_sfp_type_da_cu_core1:
- ecmd->port = PORT_DA;
- break;
- case ixgbe_sfp_type_sr:
- case ixgbe_sfp_type_lr:
- case ixgbe_sfp_type_srlr_core0:
- case ixgbe_sfp_type_srlr_core1:
- ecmd->port = PORT_FIBRE;
- break;
- case ixgbe_sfp_type_not_present:
- ecmd->port = PORT_NONE;
- break;
- case ixgbe_sfp_type_1g_cu_core0:
- case ixgbe_sfp_type_1g_cu_core1:
- ecmd->port = PORT_TP;
- ecmd->supported = SUPPORTED_TP;
- ecmd->advertising = (ADVERTISED_1000baseT_Full |
- ADVERTISED_TP);
- break;
- case ixgbe_sfp_type_unknown:
- default:
- ecmd->port = PORT_OTHER;
- break;
- }
- break;
- case ixgbe_phy_xaui:
- ecmd->port = PORT_NONE;
- break;
- case ixgbe_phy_unknown:
- case ixgbe_phy_generic:
- case ixgbe_phy_sfp_unsupported:
- default:
- ecmd->port = PORT_OTHER;
- break;
- }
-
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
- if (link_up) {
- switch (link_speed) {
- case IXGBE_LINK_SPEED_10GB_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_10000);
- break;
- case IXGBE_LINK_SPEED_1GB_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_1000);
- break;
- case IXGBE_LINK_SPEED_100_FULL:
- ethtool_cmd_speed_set(ecmd, SPEED_100);
- break;
- default:
- break;
- }
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- return 0;
-}
-
-static int ixgbe_set_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 advertised, old;
- s32 err = 0;
-
- if ((hw->phy.media_type == ixgbe_media_type_copper) ||
- (hw->phy.multispeed_fiber)) {
- /* 10000/copper and 1000/copper must autoneg
- * this function does not support any duplex forcing, but can
- * limit the advertising of the adapter to only 10000 or 1000 */
- if (ecmd->autoneg == AUTONEG_DISABLE)
- return -EINVAL;
-
- old = hw->phy.autoneg_advertised;
- advertised = 0;
- if (ecmd->advertising & ADVERTISED_10000baseT_Full)
- advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (ecmd->advertising & ADVERTISED_1000baseT_Full)
- advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- if (ecmd->advertising & ADVERTISED_100baseT_Full)
- advertised |= IXGBE_LINK_SPEED_100_FULL;
-
- if (old == advertised)
- return err;
- /* this sets the link speed and restarts auto-neg */
- hw->mac.autotry_restart = true;
- err = hw->mac.ops.setup_link(hw, advertised, true, true);
- if (err) {
- e_info(probe, "setup link failed with code %d\n", err);
- hw->mac.ops.setup_link(hw, old, true, true);
- }
- } else {
- /* in this case we currently only support 10Gb/FULL */
- u32 speed = ethtool_cmd_speed(ecmd);
- if ((ecmd->autoneg == AUTONEG_ENABLE) ||
- (ecmd->advertising != ADVERTISED_10000baseT_Full) ||
- (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL))
- return -EINVAL;
- }
-
- return err;
-}
-
-static void ixgbe_get_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /*
- * Flow Control Autoneg isn't on if
- * - we didn't ask for it OR
- * - it failed, we know this by tx & rx being off
- */
- if (hw->fc.disable_fc_autoneg ||
- (hw->fc.current_mode == ixgbe_fc_none))
- pause->autoneg = 0;
- else
- pause->autoneg = 1;
-
- if (hw->fc.current_mode == ixgbe_fc_rx_pause) {
- pause->rx_pause = 1;
- } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) {
- pause->tx_pause = 1;
- } else if (hw->fc.current_mode == ixgbe_fc_full) {
- pause->rx_pause = 1;
- pause->tx_pause = 1;
-#ifdef CONFIG_DCB
- } else if (hw->fc.current_mode == ixgbe_fc_pfc) {
- pause->rx_pause = 0;
- pause->tx_pause = 0;
-#endif
- }
-}
-
-static int ixgbe_set_pauseparam(struct net_device *netdev,
- struct ethtool_pauseparam *pause)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_fc_info fc;
-
-#ifdef CONFIG_DCB
- if (adapter->dcb_cfg.pfc_mode_enable ||
- ((hw->mac.type == ixgbe_mac_82598EB) &&
- (adapter->flags & IXGBE_FLAG_DCB_ENABLED)))
- return -EINVAL;
-
-#endif
- fc = hw->fc;
-
- if (pause->autoneg != AUTONEG_ENABLE)
- fc.disable_fc_autoneg = true;
- else
- fc.disable_fc_autoneg = false;
-
- if ((pause->rx_pause && pause->tx_pause) || pause->autoneg)
- fc.requested_mode = ixgbe_fc_full;
- else if (pause->rx_pause && !pause->tx_pause)
- fc.requested_mode = ixgbe_fc_rx_pause;
- else if (!pause->rx_pause && pause->tx_pause)
- fc.requested_mode = ixgbe_fc_tx_pause;
- else if (!pause->rx_pause && !pause->tx_pause)
- fc.requested_mode = ixgbe_fc_none;
- else
- return -EINVAL;
-
-#ifdef CONFIG_DCB
- adapter->last_lfc_mode = fc.requested_mode;
-#endif
-
- /* if the thing changed then we'll update and use new autoneg */
- if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) {
- hw->fc = fc;
- if (netif_running(netdev))
- ixgbe_reinit_locked(adapter);
- else
- ixgbe_reset(adapter);
- }
-
- return 0;
-}
-
-static u32 ixgbe_get_msglevel(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void ixgbe_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-static int ixgbe_get_regs_len(struct net_device *netdev)
-{
-#define IXGBE_REGS_LEN 1128
- return IXGBE_REGS_LEN * sizeof(u32);
-}
-
-#define IXGBE_GET_STAT(_A_, _R_) _A_->stats._R_
-
-static void ixgbe_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs, void *p)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
- u8 i;
-
- memset(p, 0, IXGBE_REGS_LEN * sizeof(u32));
-
- regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id;
-
- /* General Registers */
- regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL);
- regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS);
- regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
- regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP);
- regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP);
- regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
- regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER);
- regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER);
-
- /* NVM Register */
- regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC);
- regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD);
- regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA);
- regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL);
- regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA);
- regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL);
- regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA);
- regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT);
- regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP);
- regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC);
-
- /* Interrupt */
- /* don't read EICR because it can clear interrupt causes, instead
- * read EICS which is a shadow but doesn't clear EICR */
- regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS);
- regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS);
- regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS);
- regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC);
- regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC);
- regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM);
- regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0));
- regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0));
- regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT);
- regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA);
- regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0));
- regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE);
-
- /* Flow Control */
- regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP);
- regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0));
- regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1));
- regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2));
- regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3));
- for (i = 0; i < 8; i++) {
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i));
- regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i));
- break;
- case ixgbe_mac_82599EB:
- regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL_82599(i));
- regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH_82599(i));
- break;
- default:
- break;
- }
- }
- regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV);
- regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS);
-
- /* Receive DMA */
- for (i = 0; i < 64; i++)
- regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
- for (i = 0; i < 64; i++)
- regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
- for (i = 0; i < 64; i++)
- regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
- for (i = 0; i < 64; i++)
- regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
- for (i = 0; i < 64; i++)
- regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
- for (i = 0; i < 64; i++)
- regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
- for (i = 0; i < 16; i++)
- regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
- for (i = 0; i < 16; i++)
- regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
- for (i = 0; i < 8; i++)
- regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i));
- regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN);
-
- /* Receive */
- regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
- regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL);
- for (i = 0; i < 16; i++)
- regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i));
- for (i = 0; i < 16; i++)
- regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i));
- regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0));
- regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL);
- regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC);
- regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
- for (i = 0; i < 8; i++)
- regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i));
- for (i = 0; i < 8; i++)
- regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i));
- regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP);
-
- /* Transmit */
- for (i = 0; i < 32; i++)
- regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
- for (i = 0; i < 32; i++)
- regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
- for (i = 0; i < 32; i++)
- regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
- for (i = 0; i < 32; i++)
- regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
- for (i = 0; i < 32; i++)
- regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
- for (i = 0; i < 32; i++)
- regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
- for (i = 0; i < 32; i++)
- regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i));
- for (i = 0; i < 32; i++)
- regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i));
- regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL);
- for (i = 0; i < 16; i++)
- regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i));
- regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG);
- for (i = 0; i < 8; i++)
- regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i));
- regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP);
-
- /* Wake Up */
- regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC);
- regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC);
- regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS);
- regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV);
- regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT);
- regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT);
- regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL);
- regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM);
- regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0));
-
- /* DCB */
- regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS);
- regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS);
- regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS);
- regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR);
- for (i = 0; i < 8; i++)
- regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i));
- for (i = 0; i < 8; i++)
- regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i));
- for (i = 0; i < 8; i++)
- regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i));
- for (i = 0; i < 8; i++)
- regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i));
- for (i = 0; i < 8; i++)
- regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i));
- for (i = 0; i < 8; i++)
- regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i));
-
- /* Statistics */
- regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs);
- regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc);
- regs_buff[883] = IXGBE_GET_STAT(adapter, errbc);
- regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc);
- for (i = 0; i < 8; i++)
- regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]);
- regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc);
- regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc);
- regs_buff[895] = IXGBE_GET_STAT(adapter, rlec);
- regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc);
- regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc);
- regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc);
- regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc);
- for (i = 0; i < 8; i++)
- regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]);
- for (i = 0; i < 8; i++)
- regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]);
- for (i = 0; i < 8; i++)
- regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]);
- for (i = 0; i < 8; i++)
- regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]);
- regs_buff[932] = IXGBE_GET_STAT(adapter, prc64);
- regs_buff[933] = IXGBE_GET_STAT(adapter, prc127);
- regs_buff[934] = IXGBE_GET_STAT(adapter, prc255);
- regs_buff[935] = IXGBE_GET_STAT(adapter, prc511);
- regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023);
- regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522);
- regs_buff[938] = IXGBE_GET_STAT(adapter, gprc);
- regs_buff[939] = IXGBE_GET_STAT(adapter, bprc);
- regs_buff[940] = IXGBE_GET_STAT(adapter, mprc);
- regs_buff[941] = IXGBE_GET_STAT(adapter, gptc);
- regs_buff[942] = IXGBE_GET_STAT(adapter, gorc);
- regs_buff[944] = IXGBE_GET_STAT(adapter, gotc);
- for (i = 0; i < 8; i++)
- regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]);
- regs_buff[954] = IXGBE_GET_STAT(adapter, ruc);
- regs_buff[955] = IXGBE_GET_STAT(adapter, rfc);
- regs_buff[956] = IXGBE_GET_STAT(adapter, roc);
- regs_buff[957] = IXGBE_GET_STAT(adapter, rjc);
- regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc);
- regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc);
- regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc);
- regs_buff[961] = IXGBE_GET_STAT(adapter, tor);
- regs_buff[963] = IXGBE_GET_STAT(adapter, tpr);
- regs_buff[964] = IXGBE_GET_STAT(adapter, tpt);
- regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64);
- regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127);
- regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255);
- regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511);
- regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023);
- regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522);
- regs_buff[971] = IXGBE_GET_STAT(adapter, mptc);
- regs_buff[972] = IXGBE_GET_STAT(adapter, bptc);
- regs_buff[973] = IXGBE_GET_STAT(adapter, xec);
- for (i = 0; i < 16; i++)
- regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]);
- for (i = 0; i < 16; i++)
- regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]);
- for (i = 0; i < 16; i++)
- regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]);
- for (i = 0; i < 16; i++)
- regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]);
-
- /* MAC */
- regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG);
- regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL);
- regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA);
- regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0);
- regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1);
- regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA);
- regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP);
- regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP);
- regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP);
- regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0);
- regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1);
- regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP);
- regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA);
- regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE);
- regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD);
- regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS);
- regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA);
- regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD);
- regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD);
- regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD);
- regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG);
- regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1);
- regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2);
- regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS);
- regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC);
- regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS);
- regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS);
- regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3);
- regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1);
- regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2);
- regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL);
-
- /* Diagnostic */
- regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL);
- for (i = 0; i < 8; i++)
- regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i));
- regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN);
- for (i = 0; i < 4; i++)
- regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i));
- regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE);
- regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL);
- for (i = 0; i < 8; i++)
- regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i));
- regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN);
- for (i = 0; i < 4; i++)
- regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i));
- regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE);
- regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL);
- regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0);
- regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1);
- regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2);
- regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3);
- regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL);
- regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0);
- regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1);
- regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2);
- regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3);
- for (i = 0; i < 8; i++)
- regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i));
- regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL);
- regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1);
- regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2);
- regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1);
- regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2);
- regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS);
- regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL);
- regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC);
- regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC);
-}
-
-static int ixgbe_get_eeprom_len(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- return adapter->hw.eeprom.word_size * 2;
-}
-
-static int ixgbe_get_eeprom(struct net_device *netdev,
- struct ethtool_eeprom *eeprom, u8 *bytes)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u16 *eeprom_buff;
- int first_word, last_word, eeprom_len;
- int ret_val = 0;
- u16 i;
-
- if (eeprom->len == 0)
- return -EINVAL;
-
- eeprom->magic = hw->vendor_id | (hw->device_id << 16);
-
- first_word = eeprom->offset >> 1;
- last_word = (eeprom->offset + eeprom->len - 1) >> 1;
- eeprom_len = last_word - first_word + 1;
-
- eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL);
- if (!eeprom_buff)
- return -ENOMEM;
-
- ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len,
- eeprom_buff);
-
- /* Device's eeprom is always little-endian, word addressable */
- for (i = 0; i < eeprom_len; i++)
- le16_to_cpus(&eeprom_buff[i]);
-
- memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
- kfree(eeprom_buff);
-
- return ret_val;
-}
-
-static void ixgbe_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- char firmware_version[32];
-
- strncpy(drvinfo->driver, ixgbe_driver_name,
- sizeof(drvinfo->driver) - 1);
- strncpy(drvinfo->version, ixgbe_driver_version,
- sizeof(drvinfo->version) - 1);
-
- snprintf(firmware_version, sizeof(firmware_version), "%d.%d-%d",
- (adapter->eeprom_version & 0xF000) >> 12,
- (adapter->eeprom_version & 0x0FF0) >> 4,
- adapter->eeprom_version & 0x000F);
-
- strncpy(drvinfo->fw_version, firmware_version,
- sizeof(drvinfo->fw_version));
- strncpy(drvinfo->bus_info, pci_name(adapter->pdev),
- sizeof(drvinfo->bus_info));
- drvinfo->n_stats = IXGBE_STATS_LEN;
- drvinfo->testinfo_len = IXGBE_TEST_LEN;
- drvinfo->regdump_len = ixgbe_get_regs_len(netdev);
-}
-
-static void ixgbe_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_ring *tx_ring = adapter->tx_ring[0];
- struct ixgbe_ring *rx_ring = adapter->rx_ring[0];
-
- ring->rx_max_pending = IXGBE_MAX_RXD;
- ring->tx_max_pending = IXGBE_MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rx_ring->count;
- ring->tx_pending = tx_ring->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int ixgbe_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_ring *temp_tx_ring, *temp_rx_ring;
- int i, err = 0;
- u32 new_rx_count, new_tx_count;
- bool need_update = false;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- new_rx_count = max(ring->rx_pending, (u32)IXGBE_MIN_RXD);
- new_rx_count = min(new_rx_count, (u32)IXGBE_MAX_RXD);
- new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
-
- new_tx_count = max(ring->tx_pending, (u32)IXGBE_MIN_TXD);
- new_tx_count = min(new_tx_count, (u32)IXGBE_MAX_TXD);
- new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if ((new_tx_count == adapter->tx_ring[0]->count) &&
- (new_rx_count == adapter->rx_ring[0]->count)) {
- /* nothing to do */
- return 0;
- }
-
- while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
-
- if (!netif_running(adapter->netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i]->count = new_tx_count;
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->count = new_rx_count;
- adapter->tx_ring_count = new_tx_count;
- adapter->rx_ring_count = new_rx_count;
- goto clear_reset;
- }
-
- temp_tx_ring = vmalloc(adapter->num_tx_queues * sizeof(struct ixgbe_ring));
- if (!temp_tx_ring) {
- err = -ENOMEM;
- goto clear_reset;
- }
-
- if (new_tx_count != adapter->tx_ring_count) {
- for (i = 0; i < adapter->num_tx_queues; i++) {
- memcpy(&temp_tx_ring[i], adapter->tx_ring[i],
- sizeof(struct ixgbe_ring));
- temp_tx_ring[i].count = new_tx_count;
- err = ixgbe_setup_tx_resources(&temp_tx_ring[i]);
- if (err) {
- while (i) {
- i--;
- ixgbe_free_tx_resources(&temp_tx_ring[i]);
- }
- goto clear_reset;
- }
- }
- need_update = true;
- }
-
- temp_rx_ring = vmalloc(adapter->num_rx_queues * sizeof(struct ixgbe_ring));
- if (!temp_rx_ring) {
- err = -ENOMEM;
- goto err_setup;
- }
-
- if (new_rx_count != adapter->rx_ring_count) {
- for (i = 0; i < adapter->num_rx_queues; i++) {
- memcpy(&temp_rx_ring[i], adapter->rx_ring[i],
- sizeof(struct ixgbe_ring));
- temp_rx_ring[i].count = new_rx_count;
- err = ixgbe_setup_rx_resources(&temp_rx_ring[i]);
- if (err) {
- while (i) {
- i--;
- ixgbe_free_rx_resources(&temp_rx_ring[i]);
- }
- goto err_setup;
- }
- }
- need_update = true;
- }
-
- /* if rings need to be updated, here's the place to do it in one shot */
- if (need_update) {
- ixgbe_down(adapter);
-
- /* tx */
- if (new_tx_count != adapter->tx_ring_count) {
- for (i = 0; i < adapter->num_tx_queues; i++) {
- ixgbe_free_tx_resources(adapter->tx_ring[i]);
- memcpy(adapter->tx_ring[i], &temp_tx_ring[i],
- sizeof(struct ixgbe_ring));
- }
- adapter->tx_ring_count = new_tx_count;
- }
-
- /* rx */
- if (new_rx_count != adapter->rx_ring_count) {
- for (i = 0; i < adapter->num_rx_queues; i++) {
- ixgbe_free_rx_resources(adapter->rx_ring[i]);
- memcpy(adapter->rx_ring[i], &temp_rx_ring[i],
- sizeof(struct ixgbe_ring));
- }
- adapter->rx_ring_count = new_rx_count;
- }
- ixgbe_up(adapter);
- }
-
- vfree(temp_rx_ring);
-err_setup:
- vfree(temp_tx_ring);
-clear_reset:
- clear_bit(__IXGBE_RESETTING, &adapter->state);
- return err;
-}
-
-static int ixgbe_get_sset_count(struct net_device *netdev, int sset)
-{
- switch (sset) {
- case ETH_SS_TEST:
- return IXGBE_TEST_LEN;
- case ETH_SS_STATS:
- return IXGBE_STATS_LEN;
- default:
- return -EOPNOTSUPP;
- }
-}
-
-static void ixgbe_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct rtnl_link_stats64 temp;
- const struct rtnl_link_stats64 *net_stats;
- unsigned int start;
- struct ixgbe_ring *ring;
- int i, j;
- char *p = NULL;
-
- ixgbe_update_stats(adapter);
- net_stats = dev_get_stats(netdev, &temp);
- for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
- switch (ixgbe_gstrings_stats[i].type) {
- case NETDEV_STATS:
- p = (char *) net_stats +
- ixgbe_gstrings_stats[i].stat_offset;
- break;
- case IXGBE_STATS:
- p = (char *) adapter +
- ixgbe_gstrings_stats[i].stat_offset;
- break;
- }
-
- data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
- }
- for (j = 0; j < adapter->num_tx_queues; j++) {
- ring = adapter->tx_ring[j];
- do {
- start = u64_stats_fetch_begin_bh(&ring->syncp);
- data[i] = ring->stats.packets;
- data[i+1] = ring->stats.bytes;
- } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
- i += 2;
- }
- for (j = 0; j < adapter->num_rx_queues; j++) {
- ring = adapter->rx_ring[j];
- do {
- start = u64_stats_fetch_begin_bh(&ring->syncp);
- data[i] = ring->stats.packets;
- data[i+1] = ring->stats.bytes;
- } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
- i += 2;
- }
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) {
- data[i++] = adapter->stats.pxontxc[j];
- data[i++] = adapter->stats.pxofftxc[j];
- }
- for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) {
- data[i++] = adapter->stats.pxonrxc[j];
- data[i++] = adapter->stats.pxoffrxc[j];
- }
- }
-}
-
-static void ixgbe_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- char *p = (char *)data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *ixgbe_gstrings_test,
- IXGBE_TEST_LEN * ETH_GSTRING_LEN);
- break;
- case ETH_SS_STATS:
- for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
- memcpy(p, ixgbe_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_tx_queues; i++) {
- sprintf(p, "tx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- sprintf(p, "rx_queue_%u_packets", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_queue_%u_bytes", i);
- p += ETH_GSTRING_LEN;
- }
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
- sprintf(p, "tx_pb_%u_pxon", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "tx_pb_%u_pxoff", i);
- p += ETH_GSTRING_LEN;
- }
- for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) {
- sprintf(p, "rx_pb_%u_pxon", i);
- p += ETH_GSTRING_LEN;
- sprintf(p, "rx_pb_%u_pxoff", i);
- p += ETH_GSTRING_LEN;
- }
- }
- /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */
- break;
- }
-}
-
-static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- bool link_up;
- u32 link_speed = 0;
- *data = 0;
-
- hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
- if (link_up)
- return *data;
- else
- *data = 1;
- return *data;
-}
-
-/* ethtool register test data */
-struct ixgbe_reg_test {
- u16 reg;
- u8 array_len;
- u8 test_type;
- u32 mask;
- u32 write;
-};
-
-/* In the hardware, registers are laid out either singly, in arrays
- * spaced 0x40 bytes apart, or in contiguous tables. We assume
- * most tests take place on arrays or single registers (handled
- * as a single-element array) and special-case the tables.
- * Table tests are always pattern tests.
- *
- * We also make provision for some required setup steps by specifying
- * registers to be written without any read-back testing.
- */
-
-#define PATTERN_TEST 1
-#define SET_READ_TEST 2
-#define WRITE_NO_TEST 3
-#define TABLE32_TEST 4
-#define TABLE64_TEST_LO 5
-#define TABLE64_TEST_HI 6
-
-/* default 82599 register test */
-static const struct ixgbe_reg_test reg_test_82599[] = {
- { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
- { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
- { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
- { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
- { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
- { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 },
- { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF },
- { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-/* default 82598 register test */
-static const struct ixgbe_reg_test reg_test_82598[] = {
- { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 },
- { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- /* Enable all four RX queues before testing. */
- { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
- /* RDH is read-only for 82598, only test RDT. */
- { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 },
- { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 },
- { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF },
- { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 },
- { IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 },
- { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF },
- { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { 0, 0, 0, 0 }
-};
-
-static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg,
- u32 mask, u32 write)
-{
- u32 pat, val, before;
- static const u32 test_pattern[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
-
- for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) {
- before = readl(adapter->hw.hw_addr + reg);
- writel((test_pattern[pat] & write),
- (adapter->hw.hw_addr + reg));
- val = readl(adapter->hw.hw_addr + reg);
- if (val != (test_pattern[pat] & write & mask)) {
- e_err(drv, "pattern test reg %04X failed: got "
- "0x%08X expected 0x%08X\n",
- reg, val, (test_pattern[pat] & write & mask));
- *data = reg;
- writel(before, adapter->hw.hw_addr + reg);
- return 1;
- }
- writel(before, adapter->hw.hw_addr + reg);
- }
- return 0;
-}
-
-static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg,
- u32 mask, u32 write)
-{
- u32 val, before;
- before = readl(adapter->hw.hw_addr + reg);
- writel((write & mask), (adapter->hw.hw_addr + reg));
- val = readl(adapter->hw.hw_addr + reg);
- if ((write & mask) != (val & mask)) {
- e_err(drv, "set/check reg %04X test failed: got 0x%08X "
- "expected 0x%08X\n", reg, (val & mask), (write & mask));
- *data = reg;
- writel(before, (adapter->hw.hw_addr + reg));
- return 1;
- }
- writel(before, (adapter->hw.hw_addr + reg));
- return 0;
-}
-
-#define REG_PATTERN_TEST(reg, mask, write) \
- do { \
- if (reg_pattern_test(adapter, data, reg, mask, write)) \
- return 1; \
- } while (0) \
-
-
-#define REG_SET_AND_CHECK(reg, mask, write) \
- do { \
- if (reg_set_and_check(adapter, data, reg, mask, write)) \
- return 1; \
- } while (0) \
-
-static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data)
-{
- const struct ixgbe_reg_test *test;
- u32 value, before, after;
- u32 i, toggle;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- toggle = 0x7FFFF3FF;
- test = reg_test_82598;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- toggle = 0x7FFFF30F;
- test = reg_test_82599;
- break;
- default:
- *data = 1;
- return 1;
- break;
- }
-
- /*
- * Because the status register is such a special case,
- * we handle it separately from the rest of the register
- * tests. Some bits are read-only, some toggle, and some
- * are writeable on newer MACs.
- */
- before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS);
- value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle);
- after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle;
- if (value != after) {
- e_err(drv, "failed STATUS register test got: 0x%08X "
- "expected: 0x%08X\n", after, value);
- *data = 1;
- return 1;
- }
- /* restore previous status */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, before);
-
- /*
- * Perform the remainder of the register test, looping through
- * the test table until we either fail or reach the null entry.
- */
- while (test->reg) {
- for (i = 0; i < test->array_len; i++) {
- switch (test->test_type) {
- case PATTERN_TEST:
- REG_PATTERN_TEST(test->reg + (i * 0x40),
- test->mask,
- test->write);
- break;
- case SET_READ_TEST:
- REG_SET_AND_CHECK(test->reg + (i * 0x40),
- test->mask,
- test->write);
- break;
- case WRITE_NO_TEST:
- writel(test->write,
- (adapter->hw.hw_addr + test->reg)
- + (i * 0x40));
- break;
- case TABLE32_TEST:
- REG_PATTERN_TEST(test->reg + (i * 4),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_LO:
- REG_PATTERN_TEST(test->reg + (i * 8),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_HI:
- REG_PATTERN_TEST((test->reg + 4) + (i * 8),
- test->mask,
- test->write);
- break;
- }
- }
- test++;
- }
-
- *data = 0;
- return 0;
-}
-
-static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- if (hw->eeprom.ops.validate_checksum(hw, NULL))
- *data = 1;
- else
- *data = 0;
- return *data;
-}
-
-static irqreturn_t ixgbe_test_intr(int irq, void *data)
-{
- struct net_device *netdev = (struct net_device *) data;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
-
- return IRQ_HANDLED;
-}
-
-static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data)
-{
- struct net_device *netdev = adapter->netdev;
- u32 mask, i = 0, shared_int = true;
- u32 irq = adapter->pdev->irq;
-
- *data = 0;
-
- /* Hook up test interrupt handler just for this test */
- if (adapter->msix_entries) {
- /* NOTE: we don't test MSI-X interrupts here, yet */
- return 0;
- } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
- shared_int = false;
- if (request_irq(irq, ixgbe_test_intr, 0, netdev->name,
- netdev)) {
- *data = 1;
- return -1;
- }
- } else if (!request_irq(irq, ixgbe_test_intr, IRQF_PROBE_SHARED,
- netdev->name, netdev)) {
- shared_int = false;
- } else if (request_irq(irq, ixgbe_test_intr, IRQF_SHARED,
- netdev->name, netdev)) {
- *data = 1;
- return -1;
- }
- e_info(hw, "testing %s interrupt\n", shared_int ?
- "shared" : "unshared");
-
- /* Disable all the interrupts */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- /* Test each interrupt */
- for (; i < 10; i++) {
- /* Interrupt to test */
- mask = 1 << i;
-
- if (!shared_int) {
- /*
- * Disable the interrupts to be reported in
- * the cause register and then force the same
- * interrupt and see if one gets posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
- ~mask & 0x00007FFF);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
- ~mask & 0x00007FFF);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- if (adapter->test_icr & mask) {
- *data = 3;
- break;
- }
- }
-
- /*
- * Enable the interrupt to be reported in the cause
- * register and then force the same interrupt and see
- * if one gets posted. If an interrupt was not posted
- * to the bus, the test failed.
- */
- adapter->test_icr = 0;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- if (!(adapter->test_icr &mask)) {
- *data = 4;
- break;
- }
-
- if (!shared_int) {
- /*
- * Disable the other interrupts to be reported in
- * the cause register and then force the other
- * interrupts and see if any get posted. If
- * an interrupt was posted to the bus, the
- * test failed.
- */
- adapter->test_icr = 0;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC,
- ~mask & 0x00007FFF);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS,
- ~mask & 0x00007FFF);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- if (adapter->test_icr) {
- *data = 5;
- break;
- }
- }
- }
-
- /* Disable all the interrupts */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- /* Unhook test interrupt handler */
- free_irq(irq, netdev);
-
- return *data;
-}
-
-static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
- struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 reg_ctl;
-
- /* shut down the DMA engines now so they can be reinitialized later */
-
- /* first Rx */
- reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- reg_ctl &= ~IXGBE_RXCTRL_RXEN;
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl);
- ixgbe_disable_rx_queue(adapter, rx_ring);
-
- /* now Tx */
- reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx));
- reg_ctl &= ~IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
- reg_ctl &= ~IXGBE_DMATXCTL_TE;
- IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl);
- break;
- default:
- break;
- }
-
- ixgbe_reset(adapter);
-
- ixgbe_free_tx_resources(&adapter->test_tx_ring);
- ixgbe_free_rx_resources(&adapter->test_rx_ring);
-}
-
-static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
- struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
- u32 rctl, reg_data;
- int ret_val;
- int err;
-
- /* Setup Tx descriptor ring and Tx buffers */
- tx_ring->count = IXGBE_DEFAULT_TXD;
- tx_ring->queue_index = 0;
- tx_ring->dev = &adapter->pdev->dev;
- tx_ring->netdev = adapter->netdev;
- tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx;
- tx_ring->numa_node = adapter->node;
-
- err = ixgbe_setup_tx_resources(tx_ring);
- if (err)
- return 1;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL);
- reg_data |= IXGBE_DMATXCTL_TE;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data);
- break;
- default:
- break;
- }
-
- ixgbe_configure_tx_ring(adapter, tx_ring);
-
- /* Setup Rx Descriptor ring and Rx buffers */
- rx_ring->count = IXGBE_DEFAULT_RXD;
- rx_ring->queue_index = 0;
- rx_ring->dev = &adapter->pdev->dev;
- rx_ring->netdev = adapter->netdev;
- rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx;
- rx_ring->rx_buf_len = IXGBE_RXBUFFER_2048;
- rx_ring->numa_node = adapter->node;
-
- err = ixgbe_setup_rx_resources(rx_ring);
- if (err) {
- ret_val = 4;
- goto err_nomem;
- }
-
- rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl & ~IXGBE_RXCTRL_RXEN);
-
- ixgbe_configure_rx_ring(adapter, rx_ring);
-
- rctl |= IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl);
-
- return 0;
-
-err_nomem:
- ixgbe_free_desc_rings(adapter);
- return ret_val;
-}
-
-static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 reg_data;
-
- /* X540 needs to set the MACC.FLU bit to force link up */
- if (adapter->hw.mac.type == ixgbe_mac_X540) {
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_MACC);
- reg_data |= IXGBE_MACC_FLU;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_MACC, reg_data);
- }
-
- /* right now we only support MAC loopback in the driver */
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
- /* Setup MAC loopback */
- reg_data |= IXGBE_HLREG0_LPBK;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
-
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
- reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_data);
-
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_AUTOC);
- reg_data &= ~IXGBE_AUTOC_LMS_MASK;
- reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_AUTOC, reg_data);
- IXGBE_WRITE_FLUSH(&adapter->hw);
- usleep_range(10000, 20000);
-
- /* Disable Atlas Tx lanes; re-enabled in reset path */
- if (hw->mac.type == ixgbe_mac_82598EB) {
- u8 atlas;
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas);
- atlas |= IXGBE_ATLAS_PDN_TX_REG_EN;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas);
- atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas);
- atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas);
-
- hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas);
- atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL;
- hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas);
- }
-
- return 0;
-}
-
-static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter)
-{
- u32 reg_data;
-
- reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
- reg_data &= ~IXGBE_HLREG0_LPBK;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data);
-}
-
-static void ixgbe_create_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- memset(skb->data, 0xFF, frame_size);
- frame_size &= ~1;
- memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
- memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
- memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
-}
-
-static int ixgbe_check_lbtest_frame(struct sk_buff *skb,
- unsigned int frame_size)
-{
- frame_size &= ~1;
- if (*(skb->data + 3) == 0xFF) {
- if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
- (*(skb->data + frame_size / 2 + 12) == 0xAF)) {
- return 0;
- }
- }
- return 13;
-}
-
-static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring,
- struct ixgbe_ring *tx_ring,
- unsigned int size)
-{
- union ixgbe_adv_rx_desc *rx_desc;
- struct ixgbe_rx_buffer *rx_buffer_info;
- struct ixgbe_tx_buffer *tx_buffer_info;
- const int bufsz = rx_ring->rx_buf_len;
- u32 staterr;
- u16 rx_ntc, tx_ntc, count = 0;
-
- /* initialize next to clean and descriptor values */
- rx_ntc = rx_ring->next_to_clean;
- tx_ntc = tx_ring->next_to_clean;
- rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-
- while (staterr & IXGBE_RXD_STAT_DD) {
- /* check Rx buffer */
- rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc];
-
- /* unmap Rx buffer, will be remapped by alloc_rx_buffers */
- dma_unmap_single(rx_ring->dev,
- rx_buffer_info->dma,
- bufsz,
- DMA_FROM_DEVICE);
- rx_buffer_info->dma = 0;
-
- /* verify contents of skb */
- if (!ixgbe_check_lbtest_frame(rx_buffer_info->skb, size))
- count++;
-
- /* unmap buffer on Tx side */
- tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc];
- ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
-
- /* increment Rx/Tx next to clean counters */
- rx_ntc++;
- if (rx_ntc == rx_ring->count)
- rx_ntc = 0;
- tx_ntc++;
- if (tx_ntc == tx_ring->count)
- tx_ntc = 0;
-
- /* fetch next descriptor */
- rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- /* re-map buffers to ring, store next to clean values */
- ixgbe_alloc_rx_buffers(rx_ring, count);
- rx_ring->next_to_clean = rx_ntc;
- tx_ring->next_to_clean = tx_ntc;
-
- return count;
-}
-
-static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_ring *tx_ring = &adapter->test_tx_ring;
- struct ixgbe_ring *rx_ring = &adapter->test_rx_ring;
- int i, j, lc, good_cnt, ret_val = 0;
- unsigned int size = 1024;
- netdev_tx_t tx_ret_val;
- struct sk_buff *skb;
-
- /* allocate test skb */
- skb = alloc_skb(size, GFP_KERNEL);
- if (!skb)
- return 11;
-
- /* place data into test skb */
- ixgbe_create_lbtest_frame(skb, size);
- skb_put(skb, size);
-
- /*
- * Calculate the loop count based on the largest descriptor ring
- * The idea is to wrap the largest ring a number of times using 64
- * send/receive pairs during each loop
- */
-
- if (rx_ring->count <= tx_ring->count)
- lc = ((tx_ring->count / 64) * 2) + 1;
- else
- lc = ((rx_ring->count / 64) * 2) + 1;
-
- for (j = 0; j <= lc; j++) {
- /* reset count of good packets */
- good_cnt = 0;
-
- /* place 64 packets on the transmit queue*/
- for (i = 0; i < 64; i++) {
- skb_get(skb);
- tx_ret_val = ixgbe_xmit_frame_ring(skb,
- adapter,
- tx_ring);
- if (tx_ret_val == NETDEV_TX_OK)
- good_cnt++;
- }
-
- if (good_cnt != 64) {
- ret_val = 12;
- break;
- }
-
- /* allow 200 milliseconds for packets to go from Tx to Rx */
- msleep(200);
-
- good_cnt = ixgbe_clean_test_rings(rx_ring, tx_ring, size);
- if (good_cnt != 64) {
- ret_val = 13;
- break;
- }
- }
-
- /* free the original skb */
- kfree_skb(skb);
-
- return ret_val;
-}
-
-static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data)
-{
- *data = ixgbe_setup_desc_rings(adapter);
- if (*data)
- goto out;
- *data = ixgbe_setup_loopback_test(adapter);
- if (*data)
- goto err_loopback;
- *data = ixgbe_run_loopback_test(adapter);
- ixgbe_loopback_cleanup(adapter);
-
-err_loopback:
- ixgbe_free_desc_rings(adapter);
-out:
- return *data;
-}
-
-static void ixgbe_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- bool if_running = netif_running(netdev);
-
- set_bit(__IXGBE_TESTING, &adapter->state);
- if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- e_info(hw, "offline testing starting\n");
-
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
- if (ixgbe_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- int i;
- for (i = 0; i < adapter->num_vfs; i++) {
- if (adapter->vfinfo[i].clear_to_send) {
- netdev_warn(netdev, "%s",
- "offline diagnostic is not "
- "supported when VFs are "
- "present\n");
- data[0] = 1;
- data[1] = 1;
- data[2] = 1;
- data[3] = 1;
- eth_test->flags |= ETH_TEST_FL_FAILED;
- clear_bit(__IXGBE_TESTING,
- &adapter->state);
- goto skip_ol_tests;
- }
- }
- }
-
- if (if_running)
- /* indicate we're in test mode */
- dev_close(netdev);
- else
- ixgbe_reset(adapter);
-
- e_info(hw, "register testing starting\n");
- if (ixgbe_reg_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- ixgbe_reset(adapter);
- e_info(hw, "eeprom testing starting\n");
- if (ixgbe_eeprom_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- ixgbe_reset(adapter);
- e_info(hw, "interrupt testing starting\n");
- if (ixgbe_intr_test(adapter, &data[2]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* If SRIOV or VMDq is enabled then skip MAC
- * loopback diagnostic. */
- if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED |
- IXGBE_FLAG_VMDQ_ENABLED)) {
- e_info(hw, "Skip MAC loopback diagnostic in VT "
- "mode\n");
- data[3] = 0;
- goto skip_loopback;
- }
-
- ixgbe_reset(adapter);
- e_info(hw, "loopback testing starting\n");
- if (ixgbe_loopback_test(adapter, &data[3]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
-skip_loopback:
- ixgbe_reset(adapter);
-
- clear_bit(__IXGBE_TESTING, &adapter->state);
- if (if_running)
- dev_open(netdev);
- } else {
- e_info(hw, "online testing starting\n");
- /* Online tests */
- if (ixgbe_link_test(adapter, &data[4]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* Online tests aren't run; pass by default */
- data[0] = 0;
- data[1] = 0;
- data[2] = 0;
- data[3] = 0;
-
- clear_bit(__IXGBE_TESTING, &adapter->state);
- }
-skip_ol_tests:
- msleep_interruptible(4 * 1000);
-}
-
-static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter,
- struct ethtool_wolinfo *wol)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int retval = 1;
-
- /* WOL not supported except for the following */
- switch(hw->device_id) {
- case IXGBE_DEV_ID_82599_SFP:
- /* Only this subdevice supports WOL */
- if (hw->subsystem_device_id != IXGBE_SUBDEV_ID_82599_SFP) {
- wol->supported = 0;
- break;
- }
- retval = 0;
- break;
- case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
- /* All except this subdevice support WOL */
- if (hw->subsystem_device_id ==
- IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) {
- wol->supported = 0;
- break;
- }
- retval = 0;
- break;
- case IXGBE_DEV_ID_82599_KX4:
- retval = 0;
- break;
- default:
- wol->supported = 0;
- }
-
- return retval;
-}
-
-static void ixgbe_get_wol(struct net_device *netdev,
- struct ethtool_wolinfo *wol)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- wol->supported = WAKE_UCAST | WAKE_MCAST |
- WAKE_BCAST | WAKE_MAGIC;
- wol->wolopts = 0;
-
- if (ixgbe_wol_exclusion(adapter, wol) ||
- !device_can_wakeup(&adapter->pdev->dev))
- return;
-
- if (adapter->wol & IXGBE_WUFC_EX)
- wol->wolopts |= WAKE_UCAST;
- if (adapter->wol & IXGBE_WUFC_MC)
- wol->wolopts |= WAKE_MCAST;
- if (adapter->wol & IXGBE_WUFC_BC)
- wol->wolopts |= WAKE_BCAST;
- if (adapter->wol & IXGBE_WUFC_MAG)
- wol->wolopts |= WAKE_MAGIC;
-}
-
-static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE))
- return -EOPNOTSUPP;
-
- if (ixgbe_wol_exclusion(adapter, wol))
- return wol->wolopts ? -EOPNOTSUPP : 0;
-
- adapter->wol = 0;
-
- if (wol->wolopts & WAKE_UCAST)
- adapter->wol |= IXGBE_WUFC_EX;
- if (wol->wolopts & WAKE_MCAST)
- adapter->wol |= IXGBE_WUFC_MC;
- if (wol->wolopts & WAKE_BCAST)
- adapter->wol |= IXGBE_WUFC_BC;
- if (wol->wolopts & WAKE_MAGIC)
- adapter->wol |= IXGBE_WUFC_MAG;
-
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- return 0;
-}
-
-static int ixgbe_nway_reset(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- if (netif_running(netdev))
- ixgbe_reinit_locked(adapter);
-
- return 0;
-}
-
-static int ixgbe_set_phys_id(struct net_device *netdev,
- enum ethtool_phys_id_state state)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- switch (state) {
- case ETHTOOL_ID_ACTIVE:
- adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
- return 2;
-
- case ETHTOOL_ID_ON:
- hw->mac.ops.led_on(hw, IXGBE_LED_ON);
- break;
-
- case ETHTOOL_ID_OFF:
- hw->mac.ops.led_off(hw, IXGBE_LED_ON);
- break;
-
- case ETHTOOL_ID_INACTIVE:
- /* Restore LED settings */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg);
- break;
- }
-
- return 0;
-}
-
-static int ixgbe_get_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit;
-
- /* only valid if in constant ITR mode */
- switch (adapter->rx_itr_setting) {
- case 0:
- /* throttling disabled */
- ec->rx_coalesce_usecs = 0;
- break;
- case 1:
- /* dynamic ITR mode */
- ec->rx_coalesce_usecs = 1;
- break;
- default:
- /* fixed interrupt rate mode */
- ec->rx_coalesce_usecs = 1000000/adapter->rx_eitr_param;
- break;
- }
-
- /* if in mixed tx/rx queues per vector mode, report only rx settings */
- if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count)
- return 0;
-
- /* only valid if in constant ITR mode */
- switch (adapter->tx_itr_setting) {
- case 0:
- /* throttling disabled */
- ec->tx_coalesce_usecs = 0;
- break;
- case 1:
- /* dynamic ITR mode */
- ec->tx_coalesce_usecs = 1;
- break;
- default:
- ec->tx_coalesce_usecs = 1000000/adapter->tx_eitr_param;
- break;
- }
-
- return 0;
-}
-
-/*
- * this function must be called before setting the new value of
- * rx_itr_setting
- */
-static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter,
- struct ethtool_coalesce *ec)
-{
- struct net_device *netdev = adapter->netdev;
-
- if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE))
- return false;
-
- /* if interrupt rate is too high then disable RSC */
- if (ec->rx_coalesce_usecs != 1 &&
- ec->rx_coalesce_usecs <= 1000000/IXGBE_MAX_RSC_INT_RATE) {
- if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
- e_info(probe, "rx-usecs set too low, "
- "disabling RSC\n");
- adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED;
- return true;
- }
- } else {
- /* check the feature flag value and enable RSC if necessary */
- if ((netdev->features & NETIF_F_LRO) &&
- !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
- e_info(probe, "rx-usecs set to %d, "
- "re-enabling RSC\n",
- ec->rx_coalesce_usecs);
- adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
- return true;
- }
- }
- return false;
-}
-
-static int ixgbe_set_coalesce(struct net_device *netdev,
- struct ethtool_coalesce *ec)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_q_vector *q_vector;
- int i;
- bool need_reset = false;
-
- /* don't accept tx specific changes if we've got mixed RxTx vectors */
- if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count
- && ec->tx_coalesce_usecs)
- return -EINVAL;
-
- if (ec->tx_max_coalesced_frames_irq)
- adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq;
-
- if (ec->rx_coalesce_usecs > 1) {
- /* check the limits */
- if ((1000000/ec->rx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
- (1000000/ec->rx_coalesce_usecs < IXGBE_MIN_INT_RATE))
- return -EINVAL;
-
- /* check the old value and enable RSC if necessary */
- need_reset = ixgbe_update_rsc(adapter, ec);
-
- /* store the value in ints/second */
- adapter->rx_eitr_param = 1000000/ec->rx_coalesce_usecs;
-
- /* static value of interrupt rate */
- adapter->rx_itr_setting = adapter->rx_eitr_param;
- /* clear the lower bit as its used for dynamic state */
- adapter->rx_itr_setting &= ~1;
- } else if (ec->rx_coalesce_usecs == 1) {
- /* check the old value and enable RSC if necessary */
- need_reset = ixgbe_update_rsc(adapter, ec);
-
- /* 1 means dynamic mode */
- adapter->rx_eitr_param = 20000;
- adapter->rx_itr_setting = 1;
- } else {
- /* check the old value and enable RSC if necessary */
- need_reset = ixgbe_update_rsc(adapter, ec);
- /*
- * any other value means disable eitr, which is best
- * served by setting the interrupt rate very high
- */
- adapter->rx_eitr_param = IXGBE_MAX_INT_RATE;
- adapter->rx_itr_setting = 0;
- }
-
- if (ec->tx_coalesce_usecs > 1) {
- /*
- * don't have to worry about max_int as above because
- * tx vectors don't do hardware RSC (an rx function)
- */
- /* check the limits */
- if ((1000000/ec->tx_coalesce_usecs > IXGBE_MAX_INT_RATE) ||
- (1000000/ec->tx_coalesce_usecs < IXGBE_MIN_INT_RATE))
- return -EINVAL;
-
- /* store the value in ints/second */
- adapter->tx_eitr_param = 1000000/ec->tx_coalesce_usecs;
-
- /* static value of interrupt rate */
- adapter->tx_itr_setting = adapter->tx_eitr_param;
-
- /* clear the lower bit as its used for dynamic state */
- adapter->tx_itr_setting &= ~1;
- } else if (ec->tx_coalesce_usecs == 1) {
- /* 1 means dynamic mode */
- adapter->tx_eitr_param = 10000;
- adapter->tx_itr_setting = 1;
- } else {
- adapter->tx_eitr_param = IXGBE_MAX_INT_RATE;
- adapter->tx_itr_setting = 0;
- }
-
- /* MSI/MSIx Interrupt Mode */
- if (adapter->flags &
- (IXGBE_FLAG_MSIX_ENABLED | IXGBE_FLAG_MSI_ENABLED)) {
- int num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- for (i = 0; i < num_vectors; i++) {
- q_vector = adapter->q_vector[i];
- if (q_vector->tx.count && !q_vector->rx.count)
- /* tx only */
- q_vector->eitr = adapter->tx_eitr_param;
- else
- /* rx only or mixed */
- q_vector->eitr = adapter->rx_eitr_param;
- q_vector->tx.work_limit = adapter->tx_work_limit;
- ixgbe_write_eitr(q_vector);
- }
- /* Legacy Interrupt Mode */
- } else {
- q_vector = adapter->q_vector[0];
- q_vector->eitr = adapter->rx_eitr_param;
- q_vector->tx.work_limit = adapter->tx_work_limit;
- ixgbe_write_eitr(q_vector);
- }
-
- /*
- * do reset here at the end to make sure EITR==0 case is handled
- * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings
- * also locks in RSC enable/disable which requires reset
- */
- if (need_reset)
- ixgbe_do_reset(netdev);
-
- return 0;
-}
-
-static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
- struct ethtool_rxnfc *cmd)
-{
- union ixgbe_atr_input *mask = &adapter->fdir_mask;
- struct ethtool_rx_flow_spec *fsp =
- (struct ethtool_rx_flow_spec *)&cmd->fs;
- struct hlist_node *node, *node2;
- struct ixgbe_fdir_filter *rule = NULL;
-
- /* report total rule count */
- cmd->data = (1024 << adapter->fdir_pballoc) - 2;
-
- hlist_for_each_entry_safe(rule, node, node2,
- &adapter->fdir_filter_list, fdir_node) {
- if (fsp->location <= rule->sw_idx)
- break;
- }
-
- if (!rule || fsp->location != rule->sw_idx)
- return -EINVAL;
-
- /* fill out the flow spec entry */
-
- /* set flow type field */
- switch (rule->filter.formatted.flow_type) {
- case IXGBE_ATR_FLOW_TYPE_TCPV4:
- fsp->flow_type = TCP_V4_FLOW;
- break;
- case IXGBE_ATR_FLOW_TYPE_UDPV4:
- fsp->flow_type = UDP_V4_FLOW;
- break;
- case IXGBE_ATR_FLOW_TYPE_SCTPV4:
- fsp->flow_type = SCTP_V4_FLOW;
- break;
- case IXGBE_ATR_FLOW_TYPE_IPV4:
- fsp->flow_type = IP_USER_FLOW;
- fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4;
- fsp->h_u.usr_ip4_spec.proto = 0;
- fsp->m_u.usr_ip4_spec.proto = 0;
- break;
- default:
- return -EINVAL;
- }
-
- fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port;
- fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port;
- fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port;
- fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port;
- fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0];
- fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0];
- fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0];
- fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0];
- fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id;
- fsp->m_ext.vlan_tci = mask->formatted.vlan_id;
- fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes;
- fsp->m_ext.vlan_etype = mask->formatted.flex_bytes;
- fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool);
- fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool);
- fsp->flow_type |= FLOW_EXT;
-
- /* record action */
- if (rule->action == IXGBE_FDIR_DROP_QUEUE)
- fsp->ring_cookie = RX_CLS_FLOW_DISC;
- else
- fsp->ring_cookie = rule->action;
-
- return 0;
-}
-
-static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter,
- struct ethtool_rxnfc *cmd,
- u32 *rule_locs)
-{
- struct hlist_node *node, *node2;
- struct ixgbe_fdir_filter *rule;
- int cnt = 0;
-
- /* report total rule count */
- cmd->data = (1024 << adapter->fdir_pballoc) - 2;
-
- hlist_for_each_entry_safe(rule, node, node2,
- &adapter->fdir_filter_list, fdir_node) {
- if (cnt == cmd->rule_cnt)
- return -EMSGSIZE;
- rule_locs[cnt] = rule->sw_idx;
- cnt++;
- }
-
- return 0;
-}
-
-static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd,
- void *rule_locs)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int ret = -EOPNOTSUPP;
-
- switch (cmd->cmd) {
- case ETHTOOL_GRXRINGS:
- cmd->data = adapter->num_rx_queues;
- ret = 0;
- break;
- case ETHTOOL_GRXCLSRLCNT:
- cmd->rule_cnt = adapter->fdir_filter_count;
- ret = 0;
- break;
- case ETHTOOL_GRXCLSRULE:
- ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd);
- break;
- case ETHTOOL_GRXCLSRLALL:
- ret = ixgbe_get_ethtool_fdir_all(adapter, cmd,
- (u32 *)rule_locs);
- break;
- default:
- break;
- }
-
- return ret;
-}
-
-static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
- struct ixgbe_fdir_filter *input,
- u16 sw_idx)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct hlist_node *node, *node2, *parent;
- struct ixgbe_fdir_filter *rule;
- int err = -EINVAL;
-
- parent = NULL;
- rule = NULL;
-
- hlist_for_each_entry_safe(rule, node, node2,
- &adapter->fdir_filter_list, fdir_node) {
- /* hash found, or no matching entry */
- if (rule->sw_idx >= sw_idx)
- break;
- parent = node;
- }
-
- /* if there is an old rule occupying our place remove it */
- if (rule && (rule->sw_idx == sw_idx)) {
- if (!input || (rule->filter.formatted.bkt_hash !=
- input->filter.formatted.bkt_hash)) {
- err = ixgbe_fdir_erase_perfect_filter_82599(hw,
- &rule->filter,
- sw_idx);
- }
-
- hlist_del(&rule->fdir_node);
- kfree(rule);
- adapter->fdir_filter_count--;
- }
-
- /*
- * If no input this was a delete, err should be 0 if a rule was
- * successfully found and removed from the list else -EINVAL
- */
- if (!input)
- return err;
-
- /* initialize node and set software index */
- INIT_HLIST_NODE(&input->fdir_node);
-
- /* add filter to the list */
- if (parent)
- hlist_add_after(parent, &input->fdir_node);
- else
- hlist_add_head(&input->fdir_node,
- &adapter->fdir_filter_list);
-
- /* update counts */
- adapter->fdir_filter_count++;
-
- return 0;
-}
-
-static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp,
- u8 *flow_type)
-{
- switch (fsp->flow_type & ~FLOW_EXT) {
- case TCP_V4_FLOW:
- *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
- break;
- case UDP_V4_FLOW:
- *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
- break;
- case SCTP_V4_FLOW:
- *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
- break;
- case IP_USER_FLOW:
- switch (fsp->h_u.usr_ip4_spec.proto) {
- case IPPROTO_TCP:
- *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
- break;
- case IPPROTO_UDP:
- *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4;
- break;
- case IPPROTO_SCTP:
- *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4;
- break;
- case 0:
- if (!fsp->m_u.usr_ip4_spec.proto) {
- *flow_type = IXGBE_ATR_FLOW_TYPE_IPV4;
- break;
- }
- default:
- return 0;
- }
- break;
- default:
- return 0;
- }
-
- return 1;
-}
-
-static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
- struct ethtool_rxnfc *cmd)
-{
- struct ethtool_rx_flow_spec *fsp =
- (struct ethtool_rx_flow_spec *)&cmd->fs;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_fdir_filter *input;
- union ixgbe_atr_input mask;
- int err;
-
- if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE))
- return -EOPNOTSUPP;
-
- /*
- * Don't allow programming if the action is a queue greater than
- * the number of online Rx queues.
- */
- if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) &&
- (fsp->ring_cookie >= adapter->num_rx_queues))
- return -EINVAL;
-
- /* Don't allow indexes to exist outside of available space */
- if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) {
- e_err(drv, "Location out of range\n");
- return -EINVAL;
- }
-
- input = kzalloc(sizeof(*input), GFP_ATOMIC);
- if (!input)
- return -ENOMEM;
-
- memset(&mask, 0, sizeof(union ixgbe_atr_input));
-
- /* set SW index */
- input->sw_idx = fsp->location;
-
- /* record flow type */
- if (!ixgbe_flowspec_to_flow_type(fsp,
- &input->filter.formatted.flow_type)) {
- e_err(drv, "Unrecognized flow type\n");
- goto err_out;
- }
-
- mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK |
- IXGBE_ATR_L4TYPE_MASK;
-
- if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4)
- mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK;
-
- /* Copy input into formatted structures */
- input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src;
- mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src;
- input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst;
- mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst;
- input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc;
- mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc;
- input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst;
- mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst;
-
- if (fsp->flow_type & FLOW_EXT) {
- input->filter.formatted.vm_pool =
- (unsigned char)ntohl(fsp->h_ext.data[1]);
- mask.formatted.vm_pool =
- (unsigned char)ntohl(fsp->m_ext.data[1]);
- input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci;
- mask.formatted.vlan_id = fsp->m_ext.vlan_tci;
- input->filter.formatted.flex_bytes =
- fsp->h_ext.vlan_etype;
- mask.formatted.flex_bytes = fsp->m_ext.vlan_etype;
- }
-
- /* determine if we need to drop or route the packet */
- if (fsp->ring_cookie == RX_CLS_FLOW_DISC)
- input->action = IXGBE_FDIR_DROP_QUEUE;
- else
- input->action = fsp->ring_cookie;
-
- spin_lock(&adapter->fdir_perfect_lock);
-
- if (hlist_empty(&adapter->fdir_filter_list)) {
- /* save mask and program input mask into HW */
- memcpy(&adapter->fdir_mask, &mask, sizeof(mask));
- err = ixgbe_fdir_set_input_mask_82599(hw, &mask);
- if (err) {
- e_err(drv, "Error writing mask\n");
- goto err_out_w_lock;
- }
- } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) {
- e_err(drv, "Only one mask supported per port\n");
- goto err_out_w_lock;
- }
-
- /* apply mask and compute/store hash */
- ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask);
-
- /* program filters to filter memory */
- err = ixgbe_fdir_write_perfect_filter_82599(hw,
- &input->filter, input->sw_idx,
- (input->action == IXGBE_FDIR_DROP_QUEUE) ?
- IXGBE_FDIR_DROP_QUEUE :
- adapter->rx_ring[input->action]->reg_idx);
- if (err)
- goto err_out_w_lock;
-
- ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx);
-
- spin_unlock(&adapter->fdir_perfect_lock);
-
- return err;
-err_out_w_lock:
- spin_unlock(&adapter->fdir_perfect_lock);
-err_out:
- kfree(input);
- return -EINVAL;
-}
-
-static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter,
- struct ethtool_rxnfc *cmd)
-{
- struct ethtool_rx_flow_spec *fsp =
- (struct ethtool_rx_flow_spec *)&cmd->fs;
- int err;
-
- spin_lock(&adapter->fdir_perfect_lock);
- err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, fsp->location);
- spin_unlock(&adapter->fdir_perfect_lock);
-
- return err;
-}
-
-static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int ret = -EOPNOTSUPP;
-
- switch (cmd->cmd) {
- case ETHTOOL_SRXCLSRLINS:
- ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd);
- break;
- case ETHTOOL_SRXCLSRLDEL:
- ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd);
- break;
- default:
- break;
- }
-
- return ret;
-}
-
-static const struct ethtool_ops ixgbe_ethtool_ops = {
- .get_settings = ixgbe_get_settings,
- .set_settings = ixgbe_set_settings,
- .get_drvinfo = ixgbe_get_drvinfo,
- .get_regs_len = ixgbe_get_regs_len,
- .get_regs = ixgbe_get_regs,
- .get_wol = ixgbe_get_wol,
- .set_wol = ixgbe_set_wol,
- .nway_reset = ixgbe_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_eeprom_len = ixgbe_get_eeprom_len,
- .get_eeprom = ixgbe_get_eeprom,
- .get_ringparam = ixgbe_get_ringparam,
- .set_ringparam = ixgbe_set_ringparam,
- .get_pauseparam = ixgbe_get_pauseparam,
- .set_pauseparam = ixgbe_set_pauseparam,
- .get_msglevel = ixgbe_get_msglevel,
- .set_msglevel = ixgbe_set_msglevel,
- .self_test = ixgbe_diag_test,
- .get_strings = ixgbe_get_strings,
- .set_phys_id = ixgbe_set_phys_id,
- .get_sset_count = ixgbe_get_sset_count,
- .get_ethtool_stats = ixgbe_get_ethtool_stats,
- .get_coalesce = ixgbe_get_coalesce,
- .set_coalesce = ixgbe_set_coalesce,
- .get_rxnfc = ixgbe_get_rxnfc,
- .set_rxnfc = ixgbe_set_rxnfc,
-};
-
-void ixgbe_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "ixgbe.h"
-#include <linux/if_ether.h>
-#include <linux/gfp.h>
-#include <linux/if_vlan.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/fc/fc_fs.h>
-#include <scsi/fc/fc_fcoe.h>
-#include <scsi/libfc.h>
-#include <scsi/libfcoe.h>
-
-/**
- * ixgbe_fcoe_clear_ddp - clear the given ddp context
- * @ddp - ptr to the ixgbe_fcoe_ddp
- *
- * Returns : none
- *
- */
-static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp)
-{
- ddp->len = 0;
- ddp->err = 1;
- ddp->udl = NULL;
- ddp->udp = 0UL;
- ddp->sgl = NULL;
- ddp->sgc = 0;
-}
-
-/**
- * ixgbe_fcoe_ddp_put - free the ddp context for a given xid
- * @netdev: the corresponding net_device
- * @xid: the xid that corresponding ddp will be freed
- *
- * This is the implementation of net_device_ops.ndo_fcoe_ddp_done
- * and it is expected to be called by ULD, i.e., FCP layer of libfc
- * to release the corresponding ddp context when the I/O is done.
- *
- * Returns : data length already ddp-ed in bytes
- */
-int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid)
-{
- int len = 0;
- struct ixgbe_fcoe *fcoe;
- struct ixgbe_adapter *adapter;
- struct ixgbe_fcoe_ddp *ddp;
- u32 fcbuff;
-
- if (!netdev)
- goto out_ddp_put;
-
- if (xid >= IXGBE_FCOE_DDP_MAX)
- goto out_ddp_put;
-
- adapter = netdev_priv(netdev);
- fcoe = &adapter->fcoe;
- ddp = &fcoe->ddp[xid];
- if (!ddp->udl)
- goto out_ddp_put;
-
- len = ddp->len;
- /* if there an error, force to invalidate ddp context */
- if (ddp->err) {
- spin_lock_bh(&fcoe->lock);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW,
- (xid | IXGBE_FCFLTRW_WE));
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
- (xid | IXGBE_FCDMARW_WE));
-
- /* guaranteed to be invalidated after 100us */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW,
- (xid | IXGBE_FCDMARW_RE));
- fcbuff = IXGBE_READ_REG(&adapter->hw, IXGBE_FCBUFF);
- spin_unlock_bh(&fcoe->lock);
- if (fcbuff & IXGBE_FCBUFF_VALID)
- udelay(100);
- }
- if (ddp->sgl)
- pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc,
- DMA_FROM_DEVICE);
- if (ddp->pool) {
- pci_pool_free(ddp->pool, ddp->udl, ddp->udp);
- ddp->pool = NULL;
- }
-
- ixgbe_fcoe_clear_ddp(ddp);
-
-out_ddp_put:
- return len;
-}
-
-/**
- * ixgbe_fcoe_ddp_setup - called to set up ddp context
- * @netdev: the corresponding net_device
- * @xid: the exchange id requesting ddp
- * @sgl: the scatter-gather list for this request
- * @sgc: the number of scatter-gather items
- *
- * Returns : 1 for success and 0 for no ddp
- */
-static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc,
- int target_mode)
-{
- struct ixgbe_adapter *adapter;
- struct ixgbe_hw *hw;
- struct ixgbe_fcoe *fcoe;
- struct ixgbe_fcoe_ddp *ddp;
- struct scatterlist *sg;
- unsigned int i, j, dmacount;
- unsigned int len;
- static const unsigned int bufflen = IXGBE_FCBUFF_MIN;
- unsigned int firstoff = 0;
- unsigned int lastsize;
- unsigned int thisoff = 0;
- unsigned int thislen = 0;
- u32 fcbuff, fcdmarw, fcfltrw, fcrxctl;
- dma_addr_t addr = 0;
- struct pci_pool *pool;
-
- if (!netdev || !sgl)
- return 0;
-
- adapter = netdev_priv(netdev);
- if (xid >= IXGBE_FCOE_DDP_MAX) {
- e_warn(drv, "xid=0x%x out-of-range\n", xid);
- return 0;
- }
-
- /* no DDP if we are already down or resetting */
- if (test_bit(__IXGBE_DOWN, &adapter->state) ||
- test_bit(__IXGBE_RESETTING, &adapter->state))
- return 0;
-
- fcoe = &adapter->fcoe;
- if (!fcoe->pool) {
- e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid);
- return 0;
- }
-
- ddp = &fcoe->ddp[xid];
- if (ddp->sgl) {
- e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n",
- xid, ddp->sgl, ddp->sgc);
- return 0;
- }
- ixgbe_fcoe_clear_ddp(ddp);
-
- /* setup dma from scsi command sgl */
- dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
- if (dmacount == 0) {
- e_err(drv, "xid 0x%x DMA map error\n", xid);
- return 0;
- }
-
- /* alloc the udl from per cpu ddp pool */
- pool = *per_cpu_ptr(fcoe->pool, get_cpu());
- ddp->udl = pci_pool_alloc(pool, GFP_ATOMIC, &ddp->udp);
- if (!ddp->udl) {
- e_err(drv, "failed allocated ddp context\n");
- goto out_noddp_unmap;
- }
- ddp->pool = pool;
- ddp->sgl = sgl;
- ddp->sgc = sgc;
-
- j = 0;
- for_each_sg(sgl, sg, dmacount, i) {
- addr = sg_dma_address(sg);
- len = sg_dma_len(sg);
- while (len) {
- /* max number of buffers allowed in one DDP context */
- if (j >= IXGBE_BUFFCNT_MAX) {
- e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
- "not enough descriptors\n",
- xid, i, j, dmacount, (u64)addr);
- goto out_noddp_free;
- }
-
- /* get the offset of length of current buffer */
- thisoff = addr & ((dma_addr_t)bufflen - 1);
- thislen = min((bufflen - thisoff), len);
- /*
- * all but the 1st buffer (j == 0)
- * must be aligned on bufflen
- */
- if ((j != 0) && (thisoff))
- goto out_noddp_free;
- /*
- * all but the last buffer
- * ((i == (dmacount - 1)) && (thislen == len))
- * must end at bufflen
- */
- if (((i != (dmacount - 1)) || (thislen != len))
- && ((thislen + thisoff) != bufflen))
- goto out_noddp_free;
-
- ddp->udl[j] = (u64)(addr - thisoff);
- /* only the first buffer may have none-zero offset */
- if (j == 0)
- firstoff = thisoff;
- len -= thislen;
- addr += thislen;
- j++;
- }
- }
- /* only the last buffer may have non-full bufflen */
- lastsize = thisoff + thislen;
-
- /*
- * lastsize can not be buffer len.
- * If it is then adding another buffer with lastsize = 1.
- */
- if (lastsize == bufflen) {
- if (j >= IXGBE_BUFFCNT_MAX) {
- e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
- "not enough user buffers. We need an extra "
- "buffer because lastsize is bufflen.\n",
- xid, i, j, dmacount, (u64)addr);
- goto out_noddp_free;
- }
-
- ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma);
- j++;
- lastsize = 1;
- }
- put_cpu();
-
- fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT);
- fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT);
- fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT);
- /* Set WRCONTX bit to allow DDP for target */
- if (target_mode)
- fcbuff |= (IXGBE_FCBUFF_WRCONTX);
- fcbuff |= (IXGBE_FCBUFF_VALID);
-
- fcdmarw = xid;
- fcdmarw |= IXGBE_FCDMARW_WE;
- fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT);
-
- fcfltrw = xid;
- fcfltrw |= IXGBE_FCFLTRW_WE;
-
- /* program DMA context */
- hw = &adapter->hw;
- spin_lock_bh(&fcoe->lock);
-
- /* turn on last frame indication for target mode as FCP_RSPtarget is
- * supposed to send FCP_RSP when it is done. */
- if (target_mode && !test_bit(__IXGBE_FCOE_TARGET, &fcoe->mode)) {
- set_bit(__IXGBE_FCOE_TARGET, &fcoe->mode);
- fcrxctl = IXGBE_READ_REG(hw, IXGBE_FCRXCTRL);
- fcrxctl |= IXGBE_FCRXCTRL_LASTSEQH;
- IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, fcrxctl);
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32));
- IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32);
- IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff);
- IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw);
- /* program filter context */
- IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0);
- IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID);
- IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw);
-
- spin_unlock_bh(&fcoe->lock);
-
- return 1;
-
-out_noddp_free:
- pci_pool_free(pool, ddp->udl, ddp->udp);
- ixgbe_fcoe_clear_ddp(ddp);
-
-out_noddp_unmap:
- pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE);
- put_cpu();
- return 0;
-}
-
-/**
- * ixgbe_fcoe_ddp_get - called to set up ddp context in initiator mode
- * @netdev: the corresponding net_device
- * @xid: the exchange id requesting ddp
- * @sgl: the scatter-gather list for this request
- * @sgc: the number of scatter-gather items
- *
- * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup
- * and is expected to be called from ULD, e.g., FCP layer of libfc
- * to set up ddp for the corresponding xid of the given sglist for
- * the corresponding I/O.
- *
- * Returns : 1 for success and 0 for no ddp
- */
-int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc)
-{
- return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0);
-}
-
-/**
- * ixgbe_fcoe_ddp_target - called to set up ddp context in target mode
- * @netdev: the corresponding net_device
- * @xid: the exchange id requesting ddp
- * @sgl: the scatter-gather list for this request
- * @sgc: the number of scatter-gather items
- *
- * This is the implementation of net_device_ops.ndo_fcoe_ddp_target
- * and is expected to be called from ULD, e.g., FCP layer of libfc
- * to set up ddp for the corresponding xid of the given sglist for
- * the corresponding I/O. The DDP in target mode is a write I/O request
- * from the initiator.
- *
- * Returns : 1 for success and 0 for no ddp
- */
-int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid,
- struct scatterlist *sgl, unsigned int sgc)
-{
- return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1);
-}
-
-/**
- * ixgbe_fcoe_ddp - check ddp status and mark it done
- * @adapter: ixgbe adapter
- * @rx_desc: advanced rx descriptor
- * @skb: the skb holding the received data
- *
- * This checks ddp status.
- *
- * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates
- * not passing the skb to ULD, > 0 indicates is the length of data
- * being ddped.
- */
-int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter,
- union ixgbe_adv_rx_desc *rx_desc,
- struct sk_buff *skb,
- u32 staterr)
-{
- u16 xid;
- u32 fctl;
- u32 fceofe, fcerr, fcstat;
- int rc = -EINVAL;
- struct ixgbe_fcoe *fcoe;
- struct ixgbe_fcoe_ddp *ddp;
- struct fc_frame_header *fh;
- struct fcoe_crc_eof *crc;
-
- fcerr = (staterr & IXGBE_RXDADV_ERR_FCERR);
- fceofe = (staterr & IXGBE_RXDADV_ERR_FCEOFE);
- if (fcerr == IXGBE_FCERR_BADCRC)
- skb_checksum_none_assert(skb);
- else
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- if (eth_hdr(skb)->h_proto == htons(ETH_P_8021Q))
- fh = (struct fc_frame_header *)(skb->data +
- sizeof(struct vlan_hdr) + sizeof(struct fcoe_hdr));
- else
- fh = (struct fc_frame_header *)(skb->data +
- sizeof(struct fcoe_hdr));
- fctl = ntoh24(fh->fh_f_ctl);
- if (fctl & FC_FC_EX_CTX)
- xid = be16_to_cpu(fh->fh_ox_id);
- else
- xid = be16_to_cpu(fh->fh_rx_id);
-
- if (xid >= IXGBE_FCOE_DDP_MAX)
- goto ddp_out;
-
- fcoe = &adapter->fcoe;
- ddp = &fcoe->ddp[xid];
- if (!ddp->udl)
- goto ddp_out;
-
- if (fcerr | fceofe)
- goto ddp_out;
-
- fcstat = (staterr & IXGBE_RXDADV_STAT_FCSTAT);
- if (fcstat) {
- /* update length of DDPed data */
- ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
- /* unmap the sg list when FCP_RSP is received */
- if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) {
- pci_unmap_sg(adapter->pdev, ddp->sgl,
- ddp->sgc, DMA_FROM_DEVICE);
- ddp->err = (fcerr | fceofe);
- ddp->sgl = NULL;
- ddp->sgc = 0;
- }
- /* return 0 to bypass going to ULD for DDPed data */
- if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP)
- rc = 0;
- else if (ddp->len)
- rc = ddp->len;
- }
- /* In target mode, check the last data frame of the sequence.
- * For DDP in target mode, data is already DDPed but the header
- * indication of the last data frame ould allow is to tell if we
- * got all the data and the ULP can send FCP_RSP back, as this is
- * not a full fcoe frame, we fill the trailer here so it won't be
- * dropped by the ULP stack.
- */
- if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) &&
- (fctl & FC_FC_END_SEQ)) {
- crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc));
- crc->fcoe_eof = FC_EOF_T;
- }
-ddp_out:
- return rc;
-}
-
-/**
- * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO)
- * @adapter: ixgbe adapter
- * @tx_ring: tx desc ring
- * @skb: associated skb
- * @tx_flags: tx flags
- * @hdr_len: hdr_len to be returned
- *
- * This sets up large send offload for FCoE
- *
- * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error
- */
-int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
- u32 tx_flags, u8 *hdr_len)
-{
- struct fc_frame_header *fh;
- u32 vlan_macip_lens;
- u32 fcoe_sof_eof = 0;
- u32 mss_l4len_idx;
- u8 sof, eof;
-
- if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) {
- dev_err(tx_ring->dev, "Wrong gso type %d:expecting SKB_GSO_FCOE\n",
- skb_shinfo(skb)->gso_type);
- return -EINVAL;
- }
-
- /* resets the header to point fcoe/fc */
- skb_set_network_header(skb, skb->mac_len);
- skb_set_transport_header(skb, skb->mac_len +
- sizeof(struct fcoe_hdr));
-
- /* sets up SOF and ORIS */
- sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof;
- switch (sof) {
- case FC_SOF_I2:
- fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_ORIS;
- break;
- case FC_SOF_I3:
- fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF |
- IXGBE_ADVTXD_FCOEF_ORIS;
- break;
- case FC_SOF_N2:
- break;
- case FC_SOF_N3:
- fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF;
- break;
- default:
- dev_warn(tx_ring->dev, "unknown sof = 0x%x\n", sof);
- return -EINVAL;
- }
-
- /* the first byte of the last dword is EOF */
- skb_copy_bits(skb, skb->len - 4, &eof, 1);
- /* sets up EOF and ORIE */
- switch (eof) {
- case FC_EOF_N:
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N;
- break;
- case FC_EOF_T:
- /* lso needs ORIE */
- if (skb_is_gso(skb))
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N |
- IXGBE_ADVTXD_FCOEF_ORIE;
- else
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T;
- break;
- case FC_EOF_NI:
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI;
- break;
- case FC_EOF_A:
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A;
- break;
- default:
- dev_warn(tx_ring->dev, "unknown eof = 0x%x\n", eof);
- return -EINVAL;
- }
-
- /* sets up PARINC indicating data offset */
- fh = (struct fc_frame_header *)skb_transport_header(skb);
- if (fh->fh_f_ctl[2] & FC_FC_REL_OFF)
- fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC;
-
- /* include trailer in headlen as it is replicated per frame */
- *hdr_len = sizeof(struct fcoe_crc_eof);
-
- /* hdr_len includes fc_hdr if FCoE LSO is enabled */
- if (skb_is_gso(skb))
- *hdr_len += (skb_transport_offset(skb) +
- sizeof(struct fc_frame_header));
-
- /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */
- mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
- mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
-
- /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
- vlan_macip_lens = skb_transport_offset(skb) +
- sizeof(struct fc_frame_header);
- vlan_macip_lens |= (skb_transport_offset(skb) - 4)
- << IXGBE_ADVTXD_MACLEN_SHIFT;
- vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
-
- /* write context desc */
- ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, fcoe_sof_eof,
- IXGBE_ADVTXT_TUCMD_FCOE, mss_l4len_idx);
-
- return skb_is_gso(skb);
-}
-
-static void ixgbe_fcoe_ddp_pools_free(struct ixgbe_fcoe *fcoe)
-{
- unsigned int cpu;
- struct pci_pool **pool;
-
- for_each_possible_cpu(cpu) {
- pool = per_cpu_ptr(fcoe->pool, cpu);
- if (*pool)
- pci_pool_destroy(*pool);
- }
- free_percpu(fcoe->pool);
- fcoe->pool = NULL;
-}
-
-static void ixgbe_fcoe_ddp_pools_alloc(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_fcoe *fcoe = &adapter->fcoe;
- unsigned int cpu;
- struct pci_pool **pool;
- char pool_name[32];
-
- fcoe->pool = alloc_percpu(struct pci_pool *);
- if (!fcoe->pool)
- return;
-
- /* allocate pci pool for each cpu */
- for_each_possible_cpu(cpu) {
- snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu);
- pool = per_cpu_ptr(fcoe->pool, cpu);
- *pool = pci_pool_create(pool_name,
- adapter->pdev, IXGBE_FCPTR_MAX,
- IXGBE_FCPTR_ALIGN, PAGE_SIZE);
- if (!*pool) {
- e_err(drv, "failed to alloc DDP pool on cpu:%d\n", cpu);
- ixgbe_fcoe_ddp_pools_free(fcoe);
- return;
- }
- }
-}
-
-/**
- * ixgbe_configure_fcoe - configures registers for fcoe at start
- * @adapter: ptr to ixgbe adapter
- *
- * This sets up FCoE related registers
- *
- * Returns : none
- */
-void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter)
-{
- int i, fcoe_q, fcoe_i;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_fcoe *fcoe = &adapter->fcoe;
- struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
-
- if (!fcoe->pool) {
- spin_lock_init(&fcoe->lock);
-
- ixgbe_fcoe_ddp_pools_alloc(adapter);
- if (!fcoe->pool) {
- e_err(drv, "failed to alloc percpu fcoe DDP pools\n");
- return;
- }
-
- /* Extra buffer to be shared by all DDPs for HW work around */
- fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC);
- if (fcoe->extra_ddp_buffer == NULL) {
- e_err(drv, "failed to allocated extra DDP buffer\n");
- goto out_ddp_pools;
- }
-
- fcoe->extra_ddp_buffer_dma =
- dma_map_single(&adapter->pdev->dev,
- fcoe->extra_ddp_buffer,
- IXGBE_FCBUFF_MIN,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(&adapter->pdev->dev,
- fcoe->extra_ddp_buffer_dma)) {
- e_err(drv, "failed to map extra DDP buffer\n");
- goto out_extra_ddp_buffer;
- }
- }
-
- /* Enable L2 eth type filter for FCoE */
- IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE),
- (ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN));
- /* Enable L2 eth type filter for FIP */
- IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP),
- (ETH_P_FIP | IXGBE_ETQF_FILTER_EN));
- if (adapter->ring_feature[RING_F_FCOE].indices) {
- /* Use multiple rx queues for FCoE by redirection table */
- for (i = 0; i < IXGBE_FCRETA_SIZE; i++) {
- fcoe_i = f->mask + i % f->indices;
- fcoe_i &= IXGBE_FCRETA_ENTRY_MASK;
- fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q);
- }
- IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA);
- IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0);
- } else {
- /* Use single rx queue for FCoE */
- fcoe_i = f->mask;
- fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0);
- IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE),
- IXGBE_ETQS_QUEUE_EN |
- (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
- }
- /* send FIP frames to the first FCoE queue */
- fcoe_i = f->mask;
- fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP),
- IXGBE_ETQS_QUEUE_EN |
- (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT));
-
- IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL,
- IXGBE_FCRXCTRL_FCOELLI |
- IXGBE_FCRXCTRL_FCCRCBO |
- (FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT));
- return;
-
-out_extra_ddp_buffer:
- kfree(fcoe->extra_ddp_buffer);
-out_ddp_pools:
- ixgbe_fcoe_ddp_pools_free(fcoe);
-}
-
-/**
- * ixgbe_cleanup_fcoe - release all fcoe ddp context resources
- * @adapter : ixgbe adapter
- *
- * Cleans up outstanding ddp context resources
- *
- * Returns : none
- */
-void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter)
-{
- int i;
- struct ixgbe_fcoe *fcoe = &adapter->fcoe;
-
- if (!fcoe->pool)
- return;
-
- for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++)
- ixgbe_fcoe_ddp_put(adapter->netdev, i);
- dma_unmap_single(&adapter->pdev->dev,
- fcoe->extra_ddp_buffer_dma,
- IXGBE_FCBUFF_MIN,
- DMA_FROM_DEVICE);
- kfree(fcoe->extra_ddp_buffer);
- ixgbe_fcoe_ddp_pools_free(fcoe);
-}
-
-/**
- * ixgbe_fcoe_enable - turn on FCoE offload feature
- * @netdev: the corresponding netdev
- *
- * Turns on FCoE offload feature in 82599.
- *
- * Returns : 0 indicates success or -EINVAL on failure
- */
-int ixgbe_fcoe_enable(struct net_device *netdev)
-{
- int rc = -EINVAL;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_fcoe *fcoe = &adapter->fcoe;
-
-
- if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
- goto out_enable;
-
- atomic_inc(&fcoe->refcnt);
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- goto out_enable;
-
- e_info(drv, "Enabling FCoE offload features.\n");
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_stop(netdev);
-
- ixgbe_clear_interrupt_scheme(adapter);
-
- adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
- netdev->features |= NETIF_F_FCOE_CRC;
- netdev->features |= NETIF_F_FSO;
- netdev->features |= NETIF_F_FCOE_MTU;
- netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-
- ixgbe_init_interrupt_scheme(adapter);
- netdev_features_change(netdev);
-
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_open(netdev);
- rc = 0;
-
-out_enable:
- return rc;
-}
-
-/**
- * ixgbe_fcoe_disable - turn off FCoE offload feature
- * @netdev: the corresponding netdev
- *
- * Turns off FCoE offload feature in 82599.
- *
- * Returns : 0 indicates success or -EINVAL on failure
- */
-int ixgbe_fcoe_disable(struct net_device *netdev)
-{
- int rc = -EINVAL;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_fcoe *fcoe = &adapter->fcoe;
-
- if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE))
- goto out_disable;
-
- if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
- goto out_disable;
-
- if (!atomic_dec_and_test(&fcoe->refcnt))
- goto out_disable;
-
- e_info(drv, "Disabling FCoE offload features.\n");
- netdev->features &= ~NETIF_F_FCOE_CRC;
- netdev->features &= ~NETIF_F_FSO;
- netdev->features &= ~NETIF_F_FCOE_MTU;
- netdev->fcoe_ddp_xid = 0;
- netdev_features_change(netdev);
-
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_stop(netdev);
-
- ixgbe_clear_interrupt_scheme(adapter);
- adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = 0;
- ixgbe_cleanup_fcoe(adapter);
- ixgbe_init_interrupt_scheme(adapter);
-
- if (netif_running(netdev))
- netdev->netdev_ops->ndo_open(netdev);
- rc = 0;
-
-out_disable:
- return rc;
-}
-
-/**
- * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
- * @netdev : ixgbe adapter
- * @wwn : the world wide name
- * @type: the type of world wide name
- *
- * Returns the node or port world wide name if both the prefix and the san
- * mac address are valid, then the wwn is formed based on the NAA-2 for
- * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3).
- *
- * Returns : 0 on success
- */
-int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
-{
- int rc = -EINVAL;
- u16 prefix = 0xffff;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_mac_info *mac = &adapter->hw.mac;
-
- switch (type) {
- case NETDEV_FCOE_WWNN:
- prefix = mac->wwnn_prefix;
- break;
- case NETDEV_FCOE_WWPN:
- prefix = mac->wwpn_prefix;
- break;
- default:
- break;
- }
-
- if ((prefix != 0xffff) &&
- is_valid_ether_addr(mac->san_addr)) {
- *wwn = ((u64) prefix << 48) |
- ((u64) mac->san_addr[0] << 40) |
- ((u64) mac->san_addr[1] << 32) |
- ((u64) mac->san_addr[2] << 24) |
- ((u64) mac->san_addr[3] << 16) |
- ((u64) mac->san_addr[4] << 8) |
- ((u64) mac->san_addr[5]);
- rc = 0;
- }
- return rc;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_FCOE_H
-#define _IXGBE_FCOE_H
-
-#include <scsi/fc/fc_fs.h>
-#include <scsi/fc/fc_fcoe.h>
-
-/* shift bits within STAT fo FCSTAT */
-#define IXGBE_RXDADV_FCSTAT_SHIFT 4
-
-/* ddp user buffer */
-#define IXGBE_BUFFCNT_MAX 256 /* 8 bits bufcnt */
-#define IXGBE_FCPTR_ALIGN 16
-#define IXGBE_FCPTR_MAX (IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t))
-#define IXGBE_FCBUFF_4KB 0x0
-#define IXGBE_FCBUFF_8KB 0x1
-#define IXGBE_FCBUFF_16KB 0x2
-#define IXGBE_FCBUFF_64KB 0x3
-#define IXGBE_FCBUFF_MAX 65536 /* 64KB max */
-#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */
-#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */
-
-/* Default traffic class to use for FCoE */
-#define IXGBE_FCOE_DEFTC 3
-
-/* fcerr */
-#define IXGBE_FCERR_BADCRC 0x00100000
-
-/* FCoE DDP for target mode */
-#define __IXGBE_FCOE_TARGET 1
-
-struct ixgbe_fcoe_ddp {
- int len;
- u32 err;
- unsigned int sgc;
- struct scatterlist *sgl;
- dma_addr_t udp;
- u64 *udl;
- struct pci_pool *pool;
-};
-
-struct ixgbe_fcoe {
- struct pci_pool **pool;
- atomic_t refcnt;
- spinlock_t lock;
- struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX];
- unsigned char *extra_ddp_buffer;
- dma_addr_t extra_ddp_buffer_dma;
- unsigned long mode;
-#ifdef CONFIG_IXGBE_DCB
- u8 up;
-#endif
-};
-
-#endif /* _IXGBE_FCOE_H */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/string.h>
-#include <linux/in.h>
-#include <linux/interrupt.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/sctp.h>
-#include <linux/pkt_sched.h>
-#include <linux/ipv6.h>
-#include <linux/slab.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-#include <linux/prefetch.h>
-#include <scsi/fc/fc_fcoe.h>
-
-#include "ixgbe.h"
-#include "ixgbe_common.h"
-#include "ixgbe_dcb_82599.h"
-#include "ixgbe_sriov.h"
-
-char ixgbe_driver_name[] = "ixgbe";
-static const char ixgbe_driver_string[] =
- "Intel(R) 10 Gigabit PCI Express Network Driver";
-#define MAJ 3
-#define MIN 4
-#define BUILD 8
-#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
- __stringify(BUILD) "-k"
-const char ixgbe_driver_version[] = DRV_VERSION;
-static const char ixgbe_copyright[] =
- "Copyright (c) 1999-2011 Intel Corporation.";
-
-static const struct ixgbe_info *ixgbe_info_tbl[] = {
- [board_82598] = &ixgbe_82598_info,
- [board_82599] = &ixgbe_82599_info,
- [board_X540] = &ixgbe_X540_info,
-};
-
-/* ixgbe_pci_tbl - PCI Device ID Table
- *
- * Wildcard entries (PCI_ANY_ID) should come last
- * Last entry must be all 0s
- *
- * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
- * Class, Class Mask, private data (not used) }
- */
-static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = {
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX),
- board_82598 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T),
- board_X540 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2),
- board_82599 },
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS),
- board_82599 },
-
- /* required last entry */
- {0, }
-};
-MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl);
-
-#ifdef CONFIG_IXGBE_DCA
-static int ixgbe_notify_dca(struct notifier_block *, unsigned long event,
- void *p);
-static struct notifier_block dca_notifier = {
- .notifier_call = ixgbe_notify_dca,
- .next = NULL,
- .priority = 0
-};
-#endif
-
-#ifdef CONFIG_PCI_IOV
-static unsigned int max_vfs;
-module_param(max_vfs, uint, 0);
-MODULE_PARM_DESC(max_vfs,
- "Maximum number of virtual functions to allocate per physical function");
-#endif /* CONFIG_PCI_IOV */
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
-MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-
-static inline void ixgbe_disable_sriov(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 gcr;
- u32 gpie;
- u32 vmdctl;
-
-#ifdef CONFIG_PCI_IOV
- /* disable iov and allow time for transactions to clear */
- pci_disable_sriov(adapter->pdev);
-#endif
-
- /* turn off device IOV mode */
- gcr = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
- gcr &= ~(IXGBE_GCR_EXT_SRIOV);
- IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr);
- gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
- gpie &= ~IXGBE_GPIE_VTMODE_MASK;
- IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
-
- /* set default pool back to 0 */
- vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- vmdctl &= ~IXGBE_VT_CTL_POOL_MASK;
- IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl);
- IXGBE_WRITE_FLUSH(hw);
-
- /* take a breather then clean up driver data */
- msleep(100);
-
- kfree(adapter->vfinfo);
- adapter->vfinfo = NULL;
-
- adapter->num_vfs = 0;
- adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
-}
-
-static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter)
-{
- if (!test_bit(__IXGBE_DOWN, &adapter->state) &&
- !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state))
- schedule_work(&adapter->service_task);
-}
-
-static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter)
-{
- BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state));
-
- /* flush memory to make sure state is correct before next watchog */
- smp_mb__before_clear_bit();
- clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
-}
-
-struct ixgbe_reg_info {
- u32 ofs;
- char *name;
-};
-
-static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = {
-
- /* General Registers */
- {IXGBE_CTRL, "CTRL"},
- {IXGBE_STATUS, "STATUS"},
- {IXGBE_CTRL_EXT, "CTRL_EXT"},
-
- /* Interrupt Registers */
- {IXGBE_EICR, "EICR"},
-
- /* RX Registers */
- {IXGBE_SRRCTL(0), "SRRCTL"},
- {IXGBE_DCA_RXCTRL(0), "DRXCTL"},
- {IXGBE_RDLEN(0), "RDLEN"},
- {IXGBE_RDH(0), "RDH"},
- {IXGBE_RDT(0), "RDT"},
- {IXGBE_RXDCTL(0), "RXDCTL"},
- {IXGBE_RDBAL(0), "RDBAL"},
- {IXGBE_RDBAH(0), "RDBAH"},
-
- /* TX Registers */
- {IXGBE_TDBAL(0), "TDBAL"},
- {IXGBE_TDBAH(0), "TDBAH"},
- {IXGBE_TDLEN(0), "TDLEN"},
- {IXGBE_TDH(0), "TDH"},
- {IXGBE_TDT(0), "TDT"},
- {IXGBE_TXDCTL(0), "TXDCTL"},
-
- /* List Terminator */
- {}
-};
-
-
-/*
- * ixgbe_regdump - register printout routine
- */
-static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo)
-{
- int i = 0, j = 0;
- char rname[16];
- u32 regs[64];
-
- switch (reginfo->ofs) {
- case IXGBE_SRRCTL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
- break;
- case IXGBE_DCA_RXCTRL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i));
- break;
- case IXGBE_RDLEN(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i));
- break;
- case IXGBE_RDH(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i));
- break;
- case IXGBE_RDT(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i));
- break;
- case IXGBE_RXDCTL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
- break;
- case IXGBE_RDBAL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i));
- break;
- case IXGBE_RDBAH(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i));
- break;
- case IXGBE_TDBAL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i));
- break;
- case IXGBE_TDBAH(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i));
- break;
- case IXGBE_TDLEN(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i));
- break;
- case IXGBE_TDH(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i));
- break;
- case IXGBE_TDT(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i));
- break;
- case IXGBE_TXDCTL(0):
- for (i = 0; i < 64; i++)
- regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
- break;
- default:
- pr_info("%-15s %08x\n", reginfo->name,
- IXGBE_READ_REG(hw, reginfo->ofs));
- return;
- }
-
- for (i = 0; i < 8; i++) {
- snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7);
- pr_err("%-15s", rname);
- for (j = 0; j < 8; j++)
- pr_cont(" %08x", regs[i*8+j]);
- pr_cont("\n");
- }
-
-}
-
-/*
- * ixgbe_dump - Print registers, tx-rings and rx-rings
- */
-static void ixgbe_dump(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_reg_info *reginfo;
- int n = 0;
- struct ixgbe_ring *tx_ring;
- struct ixgbe_tx_buffer *tx_buffer_info;
- union ixgbe_adv_tx_desc *tx_desc;
- struct my_u0 { u64 a; u64 b; } *u0;
- struct ixgbe_ring *rx_ring;
- union ixgbe_adv_rx_desc *rx_desc;
- struct ixgbe_rx_buffer *rx_buffer_info;
- u32 staterr;
- int i = 0;
-
- if (!netif_msg_hw(adapter))
- return;
-
- /* Print netdevice Info */
- if (netdev) {
- dev_info(&adapter->pdev->dev, "Net device Info\n");
- pr_info("Device Name state "
- "trans_start last_rx\n");
- pr_info("%-15s %016lX %016lX %016lX\n",
- netdev->name,
- netdev->state,
- netdev->trans_start,
- netdev->last_rx);
- }
-
- /* Print Registers */
- dev_info(&adapter->pdev->dev, "Register Dump\n");
- pr_info(" Register Name Value\n");
- for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl;
- reginfo->name; reginfo++) {
- ixgbe_regdump(hw, reginfo);
- }
-
- /* Print TX Ring Summary */
- if (!netdev || !netif_running(netdev))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "TX Rings Summary\n");
- pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
- for (n = 0; n < adapter->num_tx_queues; n++) {
- tx_ring = adapter->tx_ring[n];
- tx_buffer_info =
- &tx_ring->tx_buffer_info[tx_ring->next_to_clean];
- pr_info(" %5d %5X %5X %016llX %04X %3X %016llX\n",
- n, tx_ring->next_to_use, tx_ring->next_to_clean,
- (u64)tx_buffer_info->dma,
- tx_buffer_info->length,
- tx_buffer_info->next_to_watch,
- (u64)tx_buffer_info->time_stamp);
- }
-
- /* Print TX Rings */
- if (!netif_msg_tx_done(adapter))
- goto rx_ring_summary;
-
- dev_info(&adapter->pdev->dev, "TX Rings Dump\n");
-
- /* Transmit Descriptor Formats
- *
- * Advanced Transmit Descriptor
- * +--------------------------------------------------------------+
- * 0 | Buffer Address [63:0] |
- * +--------------------------------------------------------------+
- * 8 | PAYLEN | PORTS | IDX | STA | DCMD |DTYP | RSV | DTALEN |
- * +--------------------------------------------------------------+
- * 63 46 45 40 39 36 35 32 31 24 23 20 19 0
- */
-
- for (n = 0; n < adapter->num_tx_queues; n++) {
- tx_ring = adapter->tx_ring[n];
- pr_info("------------------------------------\n");
- pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index);
- pr_info("------------------------------------\n");
- pr_info("T [desc] [address 63:0 ] "
- "[PlPOIdStDDt Ln] [bi->dma ] "
- "leng ntw timestamp bi->skb\n");
-
- for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) {
- tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- u0 = (struct my_u0 *)tx_desc;
- pr_info("T [0x%03X] %016llX %016llX %016llX"
- " %04X %3X %016llX %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- (u64)tx_buffer_info->dma,
- tx_buffer_info->length,
- tx_buffer_info->next_to_watch,
- (u64)tx_buffer_info->time_stamp,
- tx_buffer_info->skb);
- if (i == tx_ring->next_to_use &&
- i == tx_ring->next_to_clean)
- pr_cont(" NTC/U\n");
- else if (i == tx_ring->next_to_use)
- pr_cont(" NTU\n");
- else if (i == tx_ring->next_to_clean)
- pr_cont(" NTC\n");
- else
- pr_cont("\n");
-
- if (netif_msg_pktdata(adapter) &&
- tx_buffer_info->dma != 0)
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(tx_buffer_info->dma),
- tx_buffer_info->length, true);
- }
- }
-
- /* Print RX Rings Summary */
-rx_ring_summary:
- dev_info(&adapter->pdev->dev, "RX Rings Summary\n");
- pr_info("Queue [NTU] [NTC]\n");
- for (n = 0; n < adapter->num_rx_queues; n++) {
- rx_ring = adapter->rx_ring[n];
- pr_info("%5d %5X %5X\n",
- n, rx_ring->next_to_use, rx_ring->next_to_clean);
- }
-
- /* Print RX Rings */
- if (!netif_msg_rx_status(adapter))
- goto exit;
-
- dev_info(&adapter->pdev->dev, "RX Rings Dump\n");
-
- /* Advanced Receive Descriptor (Read) Format
- * 63 1 0
- * +-----------------------------------------------------+
- * 0 | Packet Buffer Address [63:1] |A0/NSE|
- * +----------------------------------------------+------+
- * 8 | Header Buffer Address [63:1] | DD |
- * +-----------------------------------------------------+
- *
- *
- * Advanced Receive Descriptor (Write-Back) Format
- *
- * 63 48 47 32 31 30 21 20 16 15 4 3 0
- * +------------------------------------------------------+
- * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
- * | Checksum Ident | | | | Type | Type |
- * +------------------------------------------------------+
- * 8 | VLAN Tag | Length | Extended Error | Extended Status |
- * +------------------------------------------------------+
- * 63 48 47 32 31 20 19 0
- */
- for (n = 0; n < adapter->num_rx_queues; n++) {
- rx_ring = adapter->rx_ring[n];
- pr_info("------------------------------------\n");
- pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index);
- pr_info("------------------------------------\n");
- pr_info("R [desc] [ PktBuf A0] "
- "[ HeadBuf DD] [bi->dma ] [bi->skb] "
- "<-- Adv Rx Read format\n");
- pr_info("RWB[desc] [PcsmIpSHl PtRs] "
- "[vl er S cks ln] ---------------- [bi->skb] "
- "<-- Adv Rx Write-Back format\n");
-
- for (i = 0; i < rx_ring->count; i++) {
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
- rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
- u0 = (struct my_u0 *)rx_desc;
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- if (staterr & IXGBE_RXD_STAT_DD) {
- /* Descriptor Done */
- pr_info("RWB[0x%03X] %016llX "
- "%016llX ---------------- %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- rx_buffer_info->skb);
- } else {
- pr_info("R [0x%03X] %016llX "
- "%016llX %016llX %p", i,
- le64_to_cpu(u0->a),
- le64_to_cpu(u0->b),
- (u64)rx_buffer_info->dma,
- rx_buffer_info->skb);
-
- if (netif_msg_pktdata(adapter)) {
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(rx_buffer_info->dma),
- rx_ring->rx_buf_len, true);
-
- if (rx_ring->rx_buf_len
- < IXGBE_RXBUFFER_2048)
- print_hex_dump(KERN_INFO, "",
- DUMP_PREFIX_ADDRESS, 16, 1,
- phys_to_virt(
- rx_buffer_info->page_dma +
- rx_buffer_info->page_offset
- ),
- PAGE_SIZE/2, true);
- }
- }
-
- if (i == rx_ring->next_to_use)
- pr_cont(" NTU\n");
- else if (i == rx_ring->next_to_clean)
- pr_cont(" NTC\n");
- else
- pr_cont("\n");
-
- }
- }
-
-exit:
- return;
-}
-
-static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter)
-{
- u32 ctrl_ext;
-
- /* Let firmware take over control of h/w */
- ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
- ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD);
-}
-
-static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter)
-{
- u32 ctrl_ext;
-
- /* Let firmware know the driver has taken over */
- ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT,
- ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD);
-}
-
-/*
- * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors
- * @adapter: pointer to adapter struct
- * @direction: 0 for Rx, 1 for Tx, -1 for other causes
- * @queue: queue to map the corresponding interrupt to
- * @msix_vector: the vector to map to the corresponding queue
- *
- */
-static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction,
- u8 queue, u8 msix_vector)
-{
- u32 ivar, index;
- struct ixgbe_hw *hw = &adapter->hw;
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- msix_vector |= IXGBE_IVAR_ALLOC_VAL;
- if (direction == -1)
- direction = 0;
- index = (((direction * 64) + queue) >> 2) & 0x1F;
- ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
- ivar &= ~(0xFF << (8 * (queue & 0x3)));
- ivar |= (msix_vector << (8 * (queue & 0x3)));
- IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- if (direction == -1) {
- /* other causes */
- msix_vector |= IXGBE_IVAR_ALLOC_VAL;
- index = ((queue & 1) * 8);
- ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC);
- ivar &= ~(0xFF << index);
- ivar |= (msix_vector << index);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar);
- break;
- } else {
- /* tx or rx causes */
- msix_vector |= IXGBE_IVAR_ALLOC_VAL;
- index = ((16 * (queue & 1)) + (8 * direction));
- ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1));
- ivar &= ~(0xFF << index);
- ivar |= (msix_vector << index);
- IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar);
- break;
- }
- default:
- break;
- }
-}
-
-static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter,
- u64 qmask)
-{
- u32 mask;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- mask = (qmask & 0xFFFFFFFF);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
- mask = (qmask >> 32);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
- break;
- default:
- break;
- }
-}
-
-void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring,
- struct ixgbe_tx_buffer *tx_buffer_info)
-{
- if (tx_buffer_info->dma) {
- if (tx_buffer_info->mapped_as_page)
- dma_unmap_page(tx_ring->dev,
- tx_buffer_info->dma,
- tx_buffer_info->length,
- DMA_TO_DEVICE);
- else
- dma_unmap_single(tx_ring->dev,
- tx_buffer_info->dma,
- tx_buffer_info->length,
- DMA_TO_DEVICE);
- tx_buffer_info->dma = 0;
- }
- if (tx_buffer_info->skb) {
- dev_kfree_skb_any(tx_buffer_info->skb);
- tx_buffer_info->skb = NULL;
- }
- tx_buffer_info->time_stamp = 0;
- /* tx_buffer_info must be completely set up in the transmit path */
-}
-
-static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_hw_stats *hwstats = &adapter->stats;
- u32 data = 0;
- u32 xoff[8] = {0};
- int i;
-
- if ((hw->fc.current_mode == ixgbe_fc_full) ||
- (hw->fc.current_mode == ixgbe_fc_rx_pause)) {
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
- break;
- default:
- data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
- }
- hwstats->lxoffrxc += data;
-
- /* refill credits (no tx hang) if we received xoff */
- if (!data)
- return;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- clear_bit(__IXGBE_HANG_CHECK_ARMED,
- &adapter->tx_ring[i]->state);
- return;
- } else if (!(adapter->dcb_cfg.pfc_mode_enable))
- return;
-
- /* update stats for each tc, only valid with PFC enabled */
- for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) {
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
- break;
- default:
- xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i));
- }
- hwstats->pxoffrxc[i] += xoff[i];
- }
-
- /* disarm tx queues that have received xoff frames */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
- u8 tc = tx_ring->dcb_tc;
-
- if (xoff[tc])
- clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
- }
-}
-
-static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring)
-{
- return ring->tx_stats.completed;
-}
-
-static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring)
-{
- struct ixgbe_adapter *adapter = netdev_priv(ring->netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- u32 head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx));
- u32 tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx));
-
- if (head != tail)
- return (head < tail) ?
- tail - head : (tail + ring->count - head);
-
- return 0;
-}
-
-static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring)
-{
- u32 tx_done = ixgbe_get_tx_completed(tx_ring);
- u32 tx_done_old = tx_ring->tx_stats.tx_done_old;
- u32 tx_pending = ixgbe_get_tx_pending(tx_ring);
- bool ret = false;
-
- clear_check_for_tx_hang(tx_ring);
-
- /*
- * Check for a hung queue, but be thorough. This verifies
- * that a transmit has been completed since the previous
- * check AND there is at least one packet pending. The
- * ARMED bit is set to indicate a potential hang. The
- * bit is cleared if a pause frame is received to remove
- * false hang detection due to PFC or 802.3x frames. By
- * requiring this to fail twice we avoid races with
- * pfc clearing the ARMED bit and conditions where we
- * run the check_tx_hang logic with a transmit completion
- * pending but without time to complete it yet.
- */
- if ((tx_done_old == tx_done) && tx_pending) {
- /* make sure it is true for two checks in a row */
- ret = test_and_set_bit(__IXGBE_HANG_CHECK_ARMED,
- &tx_ring->state);
- } else {
- /* update completed stats and continue */
- tx_ring->tx_stats.tx_done_old = tx_done;
- /* reset the countdown */
- clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state);
- }
-
- return ret;
-}
-
-/**
- * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout
- * @adapter: driver private struct
- **/
-static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter)
-{
-
- /* Do the reset outside of interrupt context */
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
- ixgbe_service_event_schedule(adapter);
- }
-}
-
-/**
- * ixgbe_clean_tx_irq - Reclaim resources after transmit completes
- * @q_vector: structure containing interrupt and ring information
- * @tx_ring: tx ring to clean
- **/
-static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector,
- struct ixgbe_ring *tx_ring)
-{
- struct ixgbe_adapter *adapter = q_vector->adapter;
- union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
- struct ixgbe_tx_buffer *tx_buffer_info;
- unsigned int total_bytes = 0, total_packets = 0;
- u16 i, eop, count = 0;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->tx_buffer_info[i].next_to_watch;
- eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
-
- while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
- (count < q_vector->tx.work_limit)) {
- bool cleaned = false;
- rmb(); /* read buffer_info after eop_desc */
- for ( ; !cleaned; count++) {
- tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
-
- tx_desc->wb.status = 0;
- cleaned = (i == eop);
-
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- if (cleaned && tx_buffer_info->skb) {
- total_bytes += tx_buffer_info->bytecount;
- total_packets += tx_buffer_info->gso_segs;
- }
-
- ixgbe_unmap_and_free_tx_resource(tx_ring,
- tx_buffer_info);
- }
-
- tx_ring->tx_stats.completed++;
- eop = tx_ring->tx_buffer_info[i].next_to_watch;
- eop_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
- tx_ring->stats.bytes += total_bytes;
- tx_ring->stats.packets += total_packets;
- u64_stats_update_begin(&tx_ring->syncp);
- q_vector->tx.total_bytes += total_bytes;
- q_vector->tx.total_packets += total_packets;
- u64_stats_update_end(&tx_ring->syncp);
-
- if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) {
- /* schedule immediate reset if we believe we hung */
- struct ixgbe_hw *hw = &adapter->hw;
- tx_desc = IXGBE_TX_DESC_ADV(tx_ring, eop);
- e_err(drv, "Detected Tx Unit Hang\n"
- " Tx Queue <%d>\n"
- " TDH, TDT <%x>, <%x>\n"
- " next_to_use <%x>\n"
- " next_to_clean <%x>\n"
- "tx_buffer_info[next_to_clean]\n"
- " time_stamp <%lx>\n"
- " jiffies <%lx>\n",
- tx_ring->queue_index,
- IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)),
- IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)),
- tx_ring->next_to_use, eop,
- tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
-
- netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
-
- e_info(probe,
- "tx hang %d detected on queue %d, resetting adapter\n",
- adapter->tx_timeout_count + 1, tx_ring->queue_index);
-
- /* schedule immediate reset if we believe we hung */
- ixgbe_tx_timeout_reset(adapter);
-
- /* the adapter is about to reset, no point in enabling stuff */
- return true;
- }
-
-#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
- if (unlikely(count && netif_carrier_ok(tx_ring->netdev) &&
- (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
- if (__netif_subqueue_stopped(tx_ring->netdev, tx_ring->queue_index) &&
- !test_bit(__IXGBE_DOWN, &adapter->state)) {
- netif_wake_subqueue(tx_ring->netdev, tx_ring->queue_index);
- ++tx_ring->tx_stats.restart_queue;
- }
- }
-
- return count < q_vector->tx.work_limit;
-}
-
-#ifdef CONFIG_IXGBE_DCA
-static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *rx_ring,
- int cpu)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 rxctrl;
- u8 reg_idx = rx_ring->reg_idx;
-
- rxctrl = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(reg_idx));
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK;
- rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599;
- rxctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
- IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599);
- break;
- default:
- break;
- }
- rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN;
- rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN;
- rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN);
- IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl);
-}
-
-static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *tx_ring,
- int cpu)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 txctrl;
- u8 reg_idx = tx_ring->reg_idx;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(reg_idx));
- txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
- txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
- txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx));
- txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
- txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
- IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
- txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl);
- break;
- default:
- break;
- }
-}
-
-static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector)
-{
- struct ixgbe_adapter *adapter = q_vector->adapter;
- int cpu = get_cpu();
- long r_idx;
- int i;
-
- if (q_vector->cpu == cpu)
- goto out_no_update;
-
- r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->tx.count; i++) {
- ixgbe_update_tx_dca(adapter, adapter->tx_ring[r_idx], cpu);
- r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rx.count; i++) {
- ixgbe_update_rx_dca(adapter, adapter->rx_ring[r_idx], cpu);
- r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- q_vector->cpu = cpu;
-out_no_update:
- put_cpu();
-}
-
-static void ixgbe_setup_dca(struct ixgbe_adapter *adapter)
-{
- int num_q_vectors;
- int i;
-
- if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED))
- return;
-
- /* always use CB2 mode, difference is masked in the CB driver */
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2);
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
- num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- else
- num_q_vectors = 1;
-
- for (i = 0; i < num_q_vectors; i++) {
- adapter->q_vector[i]->cpu = -1;
- ixgbe_update_dca(adapter->q_vector[i]);
- }
-}
-
-static int __ixgbe_notify_dca(struct device *dev, void *data)
-{
- struct ixgbe_adapter *adapter = dev_get_drvdata(dev);
- unsigned long event = *(unsigned long *)data;
-
- if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE))
- return 0;
-
- switch (event) {
- case DCA_PROVIDER_ADD:
- /* if we're already enabled, don't do it again */
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- break;
- if (dca_add_requester(dev) == 0) {
- adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
- ixgbe_setup_dca(adapter);
- break;
- }
- /* Fall Through since DCA is disabled. */
- case DCA_PROVIDER_REMOVE:
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
- dca_remove_requester(dev);
- adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
- }
- break;
- }
-
- return 0;
-}
-#endif /* CONFIG_IXGBE_DCA */
-
-static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc,
- struct sk_buff *skb)
-{
- skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss);
-}
-
-/**
- * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type
- * @adapter: address of board private structure
- * @rx_desc: advanced rx descriptor
- *
- * Returns : true if it is FCoE pkt
- */
-static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter,
- union ixgbe_adv_rx_desc *rx_desc)
-{
- __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
-
- return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) ==
- (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE <<
- IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT)));
-}
-
-/**
- * ixgbe_receive_skb - Send a completed packet up the stack
- * @adapter: board private structure
- * @skb: packet to send up
- * @status: hardware indication of status of receive
- * @rx_ring: rx descriptor ring (for a specific queue) to setup
- * @rx_desc: rx descriptor
- **/
-static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
- struct sk_buff *skb, u8 status,
- struct ixgbe_ring *ring,
- union ixgbe_adv_rx_desc *rx_desc)
-{
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct napi_struct *napi = &q_vector->napi;
- bool is_vlan = (status & IXGBE_RXD_STAT_VP);
- u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
-
- if (is_vlan && (tag & VLAN_VID_MASK))
- __vlan_hwaccel_put_tag(skb, tag);
-
- if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
- napi_gro_receive(napi, skb);
- else
- netif_rx(skb);
-}
-
-/**
- * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum
- * @adapter: address of board private structure
- * @status_err: hardware indication of status of receive
- * @skb: skb currently being received and modified
- * @status_err: status error value of last descriptor in packet
- **/
-static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
- union ixgbe_adv_rx_desc *rx_desc,
- struct sk_buff *skb,
- u32 status_err)
-{
- skb->ip_summed = CHECKSUM_NONE;
-
- /* Rx csum disabled */
- if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
- return;
-
- /* if IP and error */
- if ((status_err & IXGBE_RXD_STAT_IPCS) &&
- (status_err & IXGBE_RXDADV_ERR_IPE)) {
- adapter->hw_csum_rx_error++;
- return;
- }
-
- if (!(status_err & IXGBE_RXD_STAT_L4CS))
- return;
-
- if (status_err & IXGBE_RXDADV_ERR_TCPE) {
- u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
-
- /*
- * 82599 errata, UDP frames with a 0 checksum can be marked as
- * checksum errors.
- */
- if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
- (adapter->hw.mac.type == ixgbe_mac_82599EB))
- return;
-
- adapter->hw_csum_rx_error++;
- return;
- }
-
- /* It must be a TCP or UDP packet with a valid checksum */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
-}
-
-static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val)
-{
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
- writel(val, rx_ring->tail);
-}
-
-/**
- * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split
- * @rx_ring: ring to place buffers on
- * @cleaned_count: number of buffers to replace
- **/
-void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
-{
- union ixgbe_adv_rx_desc *rx_desc;
- struct ixgbe_rx_buffer *bi;
- struct sk_buff *skb;
- u16 i = rx_ring->next_to_use;
-
- /* do nothing if no valid netdev defined */
- if (!rx_ring->netdev)
- return;
-
- while (cleaned_count--) {
- rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
- bi = &rx_ring->rx_buffer_info[i];
- skb = bi->skb;
-
- if (!skb) {
- skb = netdev_alloc_skb_ip_align(rx_ring->netdev,
- rx_ring->rx_buf_len);
- if (!skb) {
- rx_ring->rx_stats.alloc_rx_buff_failed++;
- goto no_buffers;
- }
- /* initialize queue mapping */
- skb_record_rx_queue(skb, rx_ring->queue_index);
- bi->skb = skb;
- }
-
- if (!bi->dma) {
- bi->dma = dma_map_single(rx_ring->dev,
- skb->data,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev, bi->dma)) {
- rx_ring->rx_stats.alloc_rx_buff_failed++;
- bi->dma = 0;
- goto no_buffers;
- }
- }
-
- if (ring_is_ps_enabled(rx_ring)) {
- if (!bi->page) {
- bi->page = netdev_alloc_page(rx_ring->netdev);
- if (!bi->page) {
- rx_ring->rx_stats.alloc_rx_page_failed++;
- goto no_buffers;
- }
- }
-
- if (!bi->page_dma) {
- /* use a half page if we're re-using */
- bi->page_offset ^= PAGE_SIZE / 2;
- bi->page_dma = dma_map_page(rx_ring->dev,
- bi->page,
- bi->page_offset,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(rx_ring->dev,
- bi->page_dma)) {
- rx_ring->rx_stats.alloc_rx_page_failed++;
- bi->page_dma = 0;
- goto no_buffers;
- }
- }
-
- /* Refresh the desc even if buffer_addrs didn't change
- * because each write-back erases this info. */
- rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
- rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
- } else {
- rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
- rx_desc->read.hdr_addr = 0;
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- }
-
-no_buffers:
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- ixgbe_release_rx_desc(rx_ring, i);
- }
-}
-
-static inline u16 ixgbe_get_hlen(union ixgbe_adv_rx_desc *rx_desc)
-{
- /* HW will not DMA in data larger than the given buffer, even if it
- * parses the (NFS, of course) header to be larger. In that case, it
- * fills the header buffer and spills the rest into the page.
- */
- u16 hdr_info = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info);
- u16 hlen = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
- IXGBE_RXDADV_HDRBUFLEN_SHIFT;
- if (hlen > IXGBE_RX_HDR_SIZE)
- hlen = IXGBE_RX_HDR_SIZE;
- return hlen;
-}
-
-/**
- * ixgbe_transform_rsc_queue - change rsc queue into a full packet
- * @skb: pointer to the last skb in the rsc queue
- *
- * This function changes a queue full of hw rsc buffers into a completed
- * packet. It uses the ->prev pointers to find the first packet and then
- * turns it into the frag list owner.
- **/
-static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb)
-{
- unsigned int frag_list_size = 0;
- unsigned int skb_cnt = 1;
-
- while (skb->prev) {
- struct sk_buff *prev = skb->prev;
- frag_list_size += skb->len;
- skb->prev = NULL;
- skb = prev;
- skb_cnt++;
- }
-
- skb_shinfo(skb)->frag_list = skb->next;
- skb->next = NULL;
- skb->len += frag_list_size;
- skb->data_len += frag_list_size;
- skb->truesize += frag_list_size;
- IXGBE_RSC_CB(skb)->skb_cnt = skb_cnt;
-
- return skb;
-}
-
-static inline bool ixgbe_get_rsc_state(union ixgbe_adv_rx_desc *rx_desc)
-{
- return !!(le32_to_cpu(rx_desc->wb.lower.lo_dword.data) &
- IXGBE_RXDADV_RSCCNT_MASK);
-}
-
-static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
- struct ixgbe_ring *rx_ring,
- int *work_done, int work_to_do)
-{
- struct ixgbe_adapter *adapter = q_vector->adapter;
- union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
- struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
- struct sk_buff *skb;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
- const int current_node = numa_node_id();
-#ifdef IXGBE_FCOE
- int ddp_bytes = 0;
-#endif /* IXGBE_FCOE */
- u32 staterr;
- u16 i;
- u16 cleaned_count = 0;
- bool pkt_is_rsc = false;
-
- i = rx_ring->next_to_clean;
- rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
-
- while (staterr & IXGBE_RXD_STAT_DD) {
- u32 upper_len = 0;
-
- rmb(); /* read descriptor and rx_buffer_info after status DD */
-
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
-
- skb = rx_buffer_info->skb;
- rx_buffer_info->skb = NULL;
- prefetch(skb->data);
-
- if (ring_is_rsc_enabled(rx_ring))
- pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
-
- /* if this is a skb from previous receive DMA will be 0 */
- if (rx_buffer_info->dma) {
- u16 hlen;
- if (pkt_is_rsc &&
- !(staterr & IXGBE_RXD_STAT_EOP) &&
- !skb->prev) {
- /*
- * When HWRSC is enabled, delay unmapping
- * of the first packet. It carries the
- * header information, HW may still
- * access the header after the writeback.
- * Only unmap it when EOP is reached
- */
- IXGBE_RSC_CB(skb)->delay_unmap = true;
- IXGBE_RSC_CB(skb)->dma = rx_buffer_info->dma;
- } else {
- dma_unmap_single(rx_ring->dev,
- rx_buffer_info->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- }
- rx_buffer_info->dma = 0;
-
- if (ring_is_ps_enabled(rx_ring)) {
- hlen = ixgbe_get_hlen(rx_desc);
- upper_len = le16_to_cpu(rx_desc->wb.upper.length);
- } else {
- hlen = le16_to_cpu(rx_desc->wb.upper.length);
- }
-
- skb_put(skb, hlen);
- } else {
- /* assume packet split since header is unmapped */
- upper_len = le16_to_cpu(rx_desc->wb.upper.length);
- }
-
- if (upper_len) {
- dma_unmap_page(rx_ring->dev,
- rx_buffer_info->page_dma,
- PAGE_SIZE / 2,
- DMA_FROM_DEVICE);
- rx_buffer_info->page_dma = 0;
- skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
- rx_buffer_info->page,
- rx_buffer_info->page_offset,
- upper_len);
-
- if ((page_count(rx_buffer_info->page) == 1) &&
- (page_to_nid(rx_buffer_info->page) == current_node))
- get_page(rx_buffer_info->page);
- else
- rx_buffer_info->page = NULL;
-
- skb->len += upper_len;
- skb->data_len += upper_len;
- skb->truesize += upper_len;
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
-
- next_rxd = IXGBE_RX_DESC_ADV(rx_ring, i);
- prefetch(next_rxd);
- cleaned_count++;
-
- if (pkt_is_rsc) {
- u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >>
- IXGBE_RXDADV_NEXTP_SHIFT;
- next_buffer = &rx_ring->rx_buffer_info[nextp];
- } else {
- next_buffer = &rx_ring->rx_buffer_info[i];
- }
-
- if (!(staterr & IXGBE_RXD_STAT_EOP)) {
- if (ring_is_ps_enabled(rx_ring)) {
- rx_buffer_info->skb = next_buffer->skb;
- rx_buffer_info->dma = next_buffer->dma;
- next_buffer->skb = skb;
- next_buffer->dma = 0;
- } else {
- skb->next = next_buffer->skb;
- skb->next->prev = skb;
- }
- rx_ring->rx_stats.non_eop_descs++;
- goto next_desc;
- }
-
- if (skb->prev) {
- skb = ixgbe_transform_rsc_queue(skb);
- /* if we got here without RSC the packet is invalid */
- if (!pkt_is_rsc) {
- __pskb_trim(skb, 0);
- rx_buffer_info->skb = skb;
- goto next_desc;
- }
- }
-
- if (ring_is_rsc_enabled(rx_ring)) {
- if (IXGBE_RSC_CB(skb)->delay_unmap) {
- dma_unmap_single(rx_ring->dev,
- IXGBE_RSC_CB(skb)->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- IXGBE_RSC_CB(skb)->dma = 0;
- IXGBE_RSC_CB(skb)->delay_unmap = false;
- }
- }
- if (pkt_is_rsc) {
- if (ring_is_ps_enabled(rx_ring))
- rx_ring->rx_stats.rsc_count +=
- skb_shinfo(skb)->nr_frags;
- else
- rx_ring->rx_stats.rsc_count +=
- IXGBE_RSC_CB(skb)->skb_cnt;
- rx_ring->rx_stats.rsc_flush++;
- }
-
- /* ERR_MASK will only have valid bits if EOP set */
- if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) {
- dev_kfree_skb_any(skb);
- goto next_desc;
- }
-
- ixgbe_rx_checksum(adapter, rx_desc, skb, staterr);
- if (adapter->netdev->features & NETIF_F_RXHASH)
- ixgbe_rx_hash(rx_desc, skb);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- skb->protocol = eth_type_trans(skb, rx_ring->netdev);
-#ifdef IXGBE_FCOE
- /* if ddp, not passing to ULD unless for FCP_RSP or error */
- if (ixgbe_rx_is_fcoe(adapter, rx_desc)) {
- ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb,
- staterr);
- if (!ddp_bytes)
- goto next_desc;
- }
-#endif /* IXGBE_FCOE */
- ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
-
-next_desc:
- rx_desc->wb.upper.status_error = 0;
-
- (*work_done)++;
- if (*work_done >= work_to_do)
- break;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) {
- ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- rx_ring->next_to_clean = i;
- cleaned_count = ixgbe_desc_unused(rx_ring);
-
- if (cleaned_count)
- ixgbe_alloc_rx_buffers(rx_ring, cleaned_count);
-
-#ifdef IXGBE_FCOE
- /* include DDPed FCoE data */
- if (ddp_bytes > 0) {
- unsigned int mss;
-
- mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) -
- sizeof(struct fc_frame_header) -
- sizeof(struct fcoe_crc_eof);
- if (mss > 512)
- mss &= ~511;
- total_rx_bytes += ddp_bytes;
- total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss);
- }
-#endif /* IXGBE_FCOE */
-
- u64_stats_update_begin(&rx_ring->syncp);
- rx_ring->stats.packets += total_rx_packets;
- rx_ring->stats.bytes += total_rx_bytes;
- u64_stats_update_end(&rx_ring->syncp);
- q_vector->rx.total_packets += total_rx_packets;
- q_vector->rx.total_bytes += total_rx_bytes;
-}
-
-static int ixgbe_clean_rxonly(struct napi_struct *, int);
-/**
- * ixgbe_configure_msix - Configure MSI-X hardware
- * @adapter: board private structure
- *
- * ixgbe_configure_msix sets up the hardware to properly generate MSI-X
- * interrupts.
- **/
-static void ixgbe_configure_msix(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_q_vector *q_vector;
- int i, q_vectors, v_idx, r_idx;
- u32 mask;
-
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /*
- * Populate the IVAR table and set the ITR values to the
- * corresponding register.
- */
- for (v_idx = 0; v_idx < q_vectors; v_idx++) {
- q_vector = adapter->q_vector[v_idx];
- /* XXX for_each_set_bit(...) */
- r_idx = find_first_bit(q_vector->rx.idx,
- adapter->num_rx_queues);
-
- for (i = 0; i < q_vector->rx.count; i++) {
- u8 reg_idx = adapter->rx_ring[r_idx]->reg_idx;
- ixgbe_set_ivar(adapter, 0, reg_idx, v_idx);
- r_idx = find_next_bit(q_vector->rx.idx,
- adapter->num_rx_queues,
- r_idx + 1);
- }
- r_idx = find_first_bit(q_vector->tx.idx,
- adapter->num_tx_queues);
-
- for (i = 0; i < q_vector->tx.count; i++) {
- u8 reg_idx = adapter->tx_ring[r_idx]->reg_idx;
- ixgbe_set_ivar(adapter, 1, reg_idx, v_idx);
- r_idx = find_next_bit(q_vector->tx.idx,
- adapter->num_tx_queues,
- r_idx + 1);
- }
-
- if (q_vector->tx.count && !q_vector->rx.count)
- /* tx only */
- q_vector->eitr = adapter->tx_eitr_param;
- else if (q_vector->rx.count)
- /* rx or mixed */
- q_vector->eitr = adapter->rx_eitr_param;
-
- ixgbe_write_eitr(q_vector);
- /* If ATR is enabled, set interrupt affinity */
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
- /*
- * Allocate the affinity_hint cpumask, assign the mask
- * for this vector, and set our affinity_hint for
- * this irq.
- */
- if (!alloc_cpumask_var(&q_vector->affinity_mask,
- GFP_KERNEL))
- return;
- cpumask_set_cpu(v_idx, q_vector->affinity_mask);
- irq_set_affinity_hint(adapter->msix_entries[v_idx].vector,
- q_vector->affinity_mask);
- }
- }
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX,
- v_idx);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- ixgbe_set_ivar(adapter, -1, 1, v_idx);
- break;
-
- default:
- break;
- }
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950);
-
- /* set up to autoclear timer, and the vectors */
- mask = IXGBE_EIMS_ENABLE_MASK;
- if (adapter->num_vfs)
- mask &= ~(IXGBE_EIMS_OTHER |
- IXGBE_EIMS_MAILBOX |
- IXGBE_EIMS_LSC);
- else
- mask &= ~(IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
-}
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-/**
- * ixgbe_update_itr - update the dynamic ITR value based on statistics
- * @q_vector: structure containing interrupt and ring information
- * @ring_container: structure containing ring performance data
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- * this functionality is controlled by the InterruptThrottleRate module
- * parameter (see ixgbe_param.c)
- **/
-static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector,
- struct ixgbe_ring_container *ring_container)
-{
- u64 bytes_perint;
- struct ixgbe_adapter *adapter = q_vector->adapter;
- int bytes = ring_container->total_bytes;
- int packets = ring_container->total_packets;
- u32 timepassed_us;
- u8 itr_setting = ring_container->itr;
-
- if (packets == 0)
- return;
-
- /* simple throttlerate management
- * 0-20MB/s lowest (100000 ints/s)
- * 20-100MB/s low (20000 ints/s)
- * 100-1249MB/s bulk (8000 ints/s)
- */
- /* what was last interrupt timeslice? */
- timepassed_us = 1000000/q_vector->eitr;
- bytes_perint = bytes / timepassed_us; /* bytes/usec */
-
- switch (itr_setting) {
- case lowest_latency:
- if (bytes_perint > adapter->eitr_low)
- itr_setting = low_latency;
- break;
- case low_latency:
- if (bytes_perint > adapter->eitr_high)
- itr_setting = bulk_latency;
- else if (bytes_perint <= adapter->eitr_low)
- itr_setting = lowest_latency;
- break;
- case bulk_latency:
- if (bytes_perint <= adapter->eitr_high)
- itr_setting = low_latency;
- break;
- }
-
- /* clear work counters since we have the values we need */
- ring_container->total_bytes = 0;
- ring_container->total_packets = 0;
-
- /* write updated itr to ring container */
- ring_container->itr = itr_setting;
-}
-
-/**
- * ixgbe_write_eitr - write EITR register in hardware specific way
- * @q_vector: structure containing interrupt and ring information
- *
- * This function is made to be called by ethtool and by the driver
- * when it needs to update EITR registers at runtime. Hardware
- * specific quirks/differences are taken care of here.
- */
-void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector)
-{
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_hw *hw = &adapter->hw;
- int v_idx = q_vector->v_idx;
- u32 itr_reg = EITR_INTS_PER_SEC_TO_REG(q_vector->eitr);
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- /* must write high and low 16 bits to reset counter */
- itr_reg |= (itr_reg << 16);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- /*
- * 82599 and X540 can support a value of zero, so allow it for
- * max interrupt rate, but there is an errata where it can
- * not be zero with RSC
- */
- if (itr_reg == 8 &&
- !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED))
- itr_reg = 0;
-
- /*
- * set the WDIS bit to not clear the timer bits and cause an
- * immediate assertion of the interrupt
- */
- itr_reg |= IXGBE_EITR_CNT_WDIS;
- break;
- default:
- break;
- }
- IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg);
-}
-
-static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector)
-{
- u32 new_itr = q_vector->eitr;
- u8 current_itr;
-
- ixgbe_update_itr(q_vector, &q_vector->tx);
- ixgbe_update_itr(q_vector, &q_vector->rx);
-
- current_itr = max(q_vector->rx.itr, q_vector->tx.itr);
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 100000;
- break;
- case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
- break;
- case bulk_latency:
- new_itr = 8000;
- break;
- default:
- break;
- }
-
- if (new_itr != q_vector->eitr) {
- /* do an exponential smoothing */
- new_itr = ((q_vector->eitr * 9) + new_itr)/10;
-
- /* save the algorithm value here */
- q_vector->eitr = new_itr;
-
- ixgbe_write_eitr(q_vector);
- }
-}
-
-/**
- * ixgbe_check_overtemp_subtask - check for over tempurature
- * @adapter: pointer to adapter
- **/
-static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 eicr = adapter->interrupt_event;
-
- if (test_bit(__IXGBE_DOWN, &adapter->state))
- return;
-
- if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
- !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT))
- return;
-
- adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT;
-
- switch (hw->device_id) {
- case IXGBE_DEV_ID_82599_T3_LOM:
- /*
- * Since the warning interrupt is for both ports
- * we don't have to check if:
- * - This interrupt wasn't for our port.
- * - We may have missed the interrupt so always have to
- * check if we got a LSC
- */
- if (!(eicr & IXGBE_EICR_GPI_SDP0) &&
- !(eicr & IXGBE_EICR_LSC))
- return;
-
- if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) {
- u32 autoneg;
- bool link_up = false;
-
- hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
-
- if (link_up)
- return;
- }
-
- /* Check if this is not due to overtemp */
- if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
- return;
-
- break;
- default:
- if (!(eicr & IXGBE_EICR_GPI_SDP0))
- return;
- break;
- }
- e_crit(drv,
- "Network adapter has been stopped because it has over heated. "
- "Restart the computer. If the problem persists, "
- "power off the system and replace the adapter\n");
-
- adapter->interrupt_event = 0;
-}
-
-static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) &&
- (eicr & IXGBE_EICR_GPI_SDP1)) {
- e_crit(probe, "Fan has stopped, replace the adapter\n");
- /* write to clear the interrupt */
- IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
- }
-}
-
-static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- if (eicr & IXGBE_EICR_GPI_SDP2) {
- /* Clear the interrupt */
- IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
- ixgbe_service_event_schedule(adapter);
- }
- }
-
- if (eicr & IXGBE_EICR_GPI_SDP1) {
- /* Clear the interrupt */
- IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- ixgbe_service_event_schedule(adapter);
- }
- }
-}
-
-static void ixgbe_check_lsc(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- adapter->lsc_int++;
- adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
- adapter->link_check_timeout = jiffies;
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
- IXGBE_WRITE_FLUSH(hw);
- ixgbe_service_event_schedule(adapter);
- }
-}
-
-static irqreturn_t ixgbe_msix_lsc(int irq, void *data)
-{
- struct ixgbe_adapter *adapter = data;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 eicr;
-
- /*
- * Workaround for Silicon errata. Use clear-by-write instead
- * of clear-by-read. Reading with EICS will return the
- * interrupt causes without clearing, which later be done
- * with the write to EICR.
- */
- eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
- IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr);
-
- if (eicr & IXGBE_EICR_LSC)
- ixgbe_check_lsc(adapter);
-
- if (eicr & IXGBE_EICR_MAILBOX)
- ixgbe_msg_task(adapter);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- /* Handle Flow Director Full threshold interrupt */
- if (eicr & IXGBE_EICR_FLOW_DIR) {
- int reinit_count = 0;
- int i;
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *ring = adapter->tx_ring[i];
- if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE,
- &ring->state))
- reinit_count++;
- }
- if (reinit_count) {
- /* no more flow director interrupts until after init */
- IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR);
- eicr &= ~IXGBE_EICR_FLOW_DIR;
- adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
- ixgbe_service_event_schedule(adapter);
- }
- }
- ixgbe_check_sfp_event(adapter, eicr);
- if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
- ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- adapter->interrupt_event = eicr;
- adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
- ixgbe_service_event_schedule(adapter);
- }
- }
- break;
- default:
- break;
- }
-
- ixgbe_check_fan_failure(adapter, eicr);
-
- /* re-enable the original interrupt state, no lsc, no queues */
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, eicr &
- ~(IXGBE_EIMS_LSC | IXGBE_EIMS_RTX_QUEUE));
-
- return IRQ_HANDLED;
-}
-
-static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter,
- u64 qmask)
-{
- u32 mask;
- struct ixgbe_hw *hw = &adapter->hw;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- mask = (qmask & 0xFFFFFFFF);
- if (mask)
- IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
- mask = (qmask >> 32);
- if (mask)
- IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
- break;
- default:
- break;
- }
- /* skip the flush */
-}
-
-static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter,
- u64 qmask)
-{
- u32 mask;
- struct ixgbe_hw *hw = &adapter->hw;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- mask = (IXGBE_EIMS_RTX_QUEUE & qmask);
- IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- mask = (qmask & 0xFFFFFFFF);
- if (mask)
- IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
- mask = (qmask >> 32);
- if (mask)
- IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
- break;
- default:
- break;
- }
- /* skip the flush */
-}
-
-static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
-{
- struct ixgbe_q_vector *q_vector = data;
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *tx_ring;
- int i, r_idx;
-
- if (!q_vector->tx.count)
- return IRQ_HANDLED;
-
- r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->tx.count; i++) {
- tx_ring = adapter->tx_ring[r_idx];
- r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- /* EIAM disabled interrupts (on this vector) for us */
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-/**
- * ixgbe_msix_clean_rx - single unshared vector rx clean (all queues)
- * @irq: unused
- * @data: pointer to our q_vector struct for this interrupt vector
- **/
-static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
-{
- struct ixgbe_q_vector *q_vector = data;
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *rx_ring;
- int r_idx;
- int i;
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- ixgbe_update_dca(q_vector);
-#endif
-
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rx.count; i++) {
- rx_ring = adapter->rx_ring[r_idx];
- r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- if (!q_vector->rx.count)
- return IRQ_HANDLED;
-
- /* EIAM disabled interrupts (on this vector) for us */
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
-{
- struct ixgbe_q_vector *q_vector = data;
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *ring;
- int r_idx;
- int i;
-
- if (!q_vector->tx.count && !q_vector->rx.count)
- return IRQ_HANDLED;
-
- r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->tx.count; i++) {
- ring = adapter->tx_ring[r_idx];
- r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rx.count; i++) {
- ring = adapter->rx_ring[r_idx];
- r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- /* EIAM disabled interrupts (on this vector) for us */
- napi_schedule(&q_vector->napi);
-
- return IRQ_HANDLED;
-}
-
-/**
- * ixgbe_clean_rxonly - msix (aka one shot) rx clean routine
- * @napi: napi struct with our devices info in it
- * @budget: amount of work driver is allowed to do this pass, in packets
- *
- * This function is optimized for cleaning one queue only on a single
- * q_vector!!!
- **/
-static int ixgbe_clean_rxonly(struct napi_struct *napi, int budget)
-{
- struct ixgbe_q_vector *q_vector =
- container_of(napi, struct ixgbe_q_vector, napi);
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *rx_ring = NULL;
- int work_done = 0;
- long r_idx;
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- ixgbe_update_dca(q_vector);
-#endif
-
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- rx_ring = adapter->rx_ring[r_idx];
-
- ixgbe_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
-
- /* If all Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->rx_itr_setting & 1)
- ixgbe_set_itr(q_vector);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable_queues(adapter,
- ((u64)1 << q_vector->v_idx));
- }
-
- return work_done;
-}
-
-/**
- * ixgbe_clean_rxtx_many - msix (aka one shot) rx clean routine
- * @napi: napi struct with our devices info in it
- * @budget: amount of work driver is allowed to do this pass, in packets
- *
- * This function will clean more than one rx queue associated with a
- * q_vector.
- **/
-static int ixgbe_clean_rxtx_many(struct napi_struct *napi, int budget)
-{
- struct ixgbe_q_vector *q_vector =
- container_of(napi, struct ixgbe_q_vector, napi);
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *ring = NULL;
- int work_done = 0, i;
- long r_idx;
- bool tx_clean_complete = true;
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- ixgbe_update_dca(q_vector);
-#endif
-
- r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->tx.count; i++) {
- ring = adapter->tx_ring[r_idx];
- tx_clean_complete &= ixgbe_clean_tx_irq(q_vector, ring);
- r_idx = find_next_bit(q_vector->tx.idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- /* attempt to distribute budget to each queue fairly, but don't allow
- * the budget to go below 1 because we'll exit polling */
- budget /= (q_vector->rx.count ?: 1);
- budget = max(budget, 1);
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rx.count; i++) {
- ring = adapter->rx_ring[r_idx];
- ixgbe_clean_rx_irq(q_vector, ring, &work_done, budget);
- r_idx = find_next_bit(q_vector->rx.idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- r_idx = find_first_bit(q_vector->rx.idx, adapter->num_rx_queues);
- ring = adapter->rx_ring[r_idx];
- /* If all Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->rx_itr_setting & 1)
- ixgbe_set_itr(q_vector);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable_queues(adapter,
- ((u64)1 << q_vector->v_idx));
- return 0;
- }
-
- return work_done;
-}
-
-/**
- * ixgbe_clean_txonly - msix (aka one shot) tx clean routine
- * @napi: napi struct with our devices info in it
- * @budget: amount of work driver is allowed to do this pass, in packets
- *
- * This function is optimized for cleaning one queue only on a single
- * q_vector!!!
- **/
-static int ixgbe_clean_txonly(struct napi_struct *napi, int budget)
-{
- struct ixgbe_q_vector *q_vector =
- container_of(napi, struct ixgbe_q_vector, napi);
- struct ixgbe_adapter *adapter = q_vector->adapter;
- struct ixgbe_ring *tx_ring = NULL;
- int work_done = 0;
- long r_idx;
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- ixgbe_update_dca(q_vector);
-#endif
-
- r_idx = find_first_bit(q_vector->tx.idx, adapter->num_tx_queues);
- tx_ring = adapter->tx_ring[r_idx];
-
- if (!ixgbe_clean_tx_irq(q_vector, tx_ring))
- work_done = budget;
-
- /* If all Tx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->tx_itr_setting & 1)
- ixgbe_set_itr(q_vector);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable_queues(adapter,
- ((u64)1 << q_vector->v_idx));
- }
-
- return work_done;
-}
-
-static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx,
- int r_idx)
-{
- struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
- struct ixgbe_ring *rx_ring = a->rx_ring[r_idx];
-
- set_bit(r_idx, q_vector->rx.idx);
- q_vector->rx.count++;
- rx_ring->q_vector = q_vector;
-}
-
-static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx,
- int t_idx)
-{
- struct ixgbe_q_vector *q_vector = a->q_vector[v_idx];
- struct ixgbe_ring *tx_ring = a->tx_ring[t_idx];
-
- set_bit(t_idx, q_vector->tx.idx);
- q_vector->tx.count++;
- tx_ring->q_vector = q_vector;
- q_vector->tx.work_limit = a->tx_work_limit;
-}
-
-/**
- * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors
- * @adapter: board private structure to initialize
- *
- * This function maps descriptor rings to the queue-specific vectors
- * we were allotted through the MSI-X enabling code. Ideally, we'd have
- * one vector per ring/queue, but on a constrained vector budget, we
- * group the rings as "efficiently" as possible. You would add new
- * mapping configurations in here.
- **/
-static int ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter)
-{
- int q_vectors;
- int v_start = 0;
- int rxr_idx = 0, txr_idx = 0;
- int rxr_remaining = adapter->num_rx_queues;
- int txr_remaining = adapter->num_tx_queues;
- int i, j;
- int rqpv, tqpv;
- int err = 0;
-
- /* No mapping required if MSI-X is disabled. */
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
- goto out;
-
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /*
- * The ideal configuration...
- * We have enough vectors to map one per queue.
- */
- if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
- for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
- map_vector_to_rxq(adapter, v_start, rxr_idx);
-
- for (; txr_idx < txr_remaining; v_start++, txr_idx++)
- map_vector_to_txq(adapter, v_start, txr_idx);
-
- goto out;
- }
-
- /*
- * If we don't have enough vectors for a 1-to-1
- * mapping, we'll have to group them so there are
- * multiple queues per vector.
- */
- /* Re-adjusting *qpv takes care of the remainder. */
- for (i = v_start; i < q_vectors; i++) {
- rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
- for (j = 0; j < rqpv; j++) {
- map_vector_to_rxq(adapter, i, rxr_idx);
- rxr_idx++;
- rxr_remaining--;
- }
- tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
- for (j = 0; j < tqpv; j++) {
- map_vector_to_txq(adapter, i, txr_idx);
- txr_idx++;
- txr_remaining--;
- }
- }
-out:
- return err;
-}
-
-/**
- * ixgbe_request_msix_irqs - Initialize MSI-X interrupts
- * @adapter: board private structure
- *
- * ixgbe_request_msix_irqs allocates MSI-X vectors and requests
- * interrupts from the kernel.
- **/
-static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- irqreturn_t (*handler)(int, void *);
- int i, vector, q_vectors, err;
- int ri = 0, ti = 0;
-
- /* Decrement for Other and TCP Timer vectors */
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- err = ixgbe_map_rings_to_vectors(adapter);
- if (err)
- return err;
-
-#define SET_HANDLER(_v) (((_v)->rx.count && (_v)->tx.count) \
- ? &ixgbe_msix_clean_many : \
- (_v)->rx.count ? &ixgbe_msix_clean_rx : \
- (_v)->tx.count ? &ixgbe_msix_clean_tx : \
- NULL)
- for (vector = 0; vector < q_vectors; vector++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[vector];
- handler = SET_HANDLER(q_vector);
-
- if (handler == &ixgbe_msix_clean_rx) {
- snprintf(q_vector->name, sizeof(q_vector->name) - 1,
- "%s-%s-%d", netdev->name, "rx", ri++);
- } else if (handler == &ixgbe_msix_clean_tx) {
- snprintf(q_vector->name, sizeof(q_vector->name) - 1,
- "%s-%s-%d", netdev->name, "tx", ti++);
- } else if (handler == &ixgbe_msix_clean_many) {
- snprintf(q_vector->name, sizeof(q_vector->name) - 1,
- "%s-%s-%d", netdev->name, "TxRx", ri++);
- ti++;
- } else {
- /* skip this unused q_vector */
- continue;
- }
- err = request_irq(adapter->msix_entries[vector].vector,
- handler, 0, q_vector->name,
- q_vector);
- if (err) {
- e_err(probe, "request_irq failed for MSIX interrupt "
- "Error: %d\n", err);
- goto free_queue_irqs;
- }
- }
-
- sprintf(adapter->lsc_int_name, "%s:lsc", netdev->name);
- err = request_irq(adapter->msix_entries[vector].vector,
- ixgbe_msix_lsc, 0, adapter->lsc_int_name, adapter);
- if (err) {
- e_err(probe, "request_irq for msix_lsc failed: %d\n", err);
- goto free_queue_irqs;
- }
-
- return 0;
-
-free_queue_irqs:
- for (i = vector - 1; i >= 0; i--)
- free_irq(adapter->msix_entries[--vector].vector,
- adapter->q_vector[i]);
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- return err;
-}
-
-/**
- * ixgbe_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues,
- bool flush)
-{
- u32 mask;
-
- mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
- if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)
- mask |= IXGBE_EIMS_GPI_SDP0;
- if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
- mask |= IXGBE_EIMS_GPI_SDP1;
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- mask |= IXGBE_EIMS_ECC;
- mask |= IXGBE_EIMS_GPI_SDP1;
- mask |= IXGBE_EIMS_GPI_SDP2;
- if (adapter->num_vfs)
- mask |= IXGBE_EIMS_MAILBOX;
- break;
- default:
- break;
- }
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
- mask |= IXGBE_EIMS_FLOW_DIR;
-
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask);
- if (queues)
- ixgbe_irq_enable_queues(adapter, ~0);
- if (flush)
- IXGBE_WRITE_FLUSH(&adapter->hw);
-
- if (adapter->num_vfs > 32) {
- u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel);
- }
-}
-
-/**
- * ixgbe_intr - legacy mode Interrupt Handler
- * @irq: interrupt number
- * @data: pointer to a network interface device structure
- **/
-static irqreturn_t ixgbe_intr(int irq, void *data)
-{
- struct ixgbe_adapter *adapter = data;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_q_vector *q_vector = adapter->q_vector[0];
- u32 eicr;
-
- /*
- * Workaround for silicon errata on 82598. Mask the interrupts
- * before the read of EICR.
- */
- IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
-
- /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read
- * therefore no explict interrupt disable is necessary */
- eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
- if (!eicr) {
- /*
- * shared interrupt alert!
- * make sure interrupts are enabled because the read will
- * have disabled interrupts due to EIAM
- * finish the workaround of silicon errata on 82598. Unmask
- * the interrupt that we masked before the EICR read.
- */
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable(adapter, true, true);
- return IRQ_NONE; /* Not our interrupt */
- }
-
- if (eicr & IXGBE_EICR_LSC)
- ixgbe_check_lsc(adapter);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- ixgbe_check_sfp_event(adapter, eicr);
- if ((adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) &&
- ((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC))) {
- if (!test_bit(__IXGBE_DOWN, &adapter->state)) {
- adapter->interrupt_event = eicr;
- adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT;
- ixgbe_service_event_schedule(adapter);
- }
- }
- break;
- default:
- break;
- }
-
- ixgbe_check_fan_failure(adapter, eicr);
-
- if (napi_schedule_prep(&(q_vector->napi))) {
- /* would disable interrupts here but EIAM disabled it */
- __napi_schedule(&(q_vector->napi));
- }
-
- /*
- * re-enable link(maybe) and non-queue interrupts, no flush.
- * ixgbe_poll will re-enable the queue interrupts
- */
-
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable(adapter, false, false);
-
- return IRQ_HANDLED;
-}
-
-static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter)
-{
- int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- for (i = 0; i < q_vectors; i++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
- bitmap_zero(q_vector->rx.idx, MAX_RX_QUEUES);
- bitmap_zero(q_vector->tx.idx, MAX_TX_QUEUES);
- q_vector->rx.count = 0;
- q_vector->tx.count = 0;
- }
-}
-
-/**
- * ixgbe_request_irq - initialize interrupts
- * @adapter: board private structure
- *
- * Attempts to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int ixgbe_request_irq(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int err;
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- err = ixgbe_request_msix_irqs(adapter);
- } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
- err = request_irq(adapter->pdev->irq, ixgbe_intr, 0,
- netdev->name, adapter);
- } else {
- err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED,
- netdev->name, adapter);
- }
-
- if (err)
- e_err(probe, "request_irq failed, Error %d\n", err);
-
- return err;
-}
-
-static void ixgbe_free_irq(struct ixgbe_adapter *adapter)
-{
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- int i, q_vectors;
-
- q_vectors = adapter->num_msix_vectors;
-
- i = q_vectors - 1;
- free_irq(adapter->msix_entries[i].vector, adapter);
-
- i--;
- for (; i >= 0; i--) {
- /* free only the irqs that were actually requested */
- if (!adapter->q_vector[i]->rx.count &&
- !adapter->q_vector[i]->tx.count)
- continue;
-
- free_irq(adapter->msix_entries[i].vector,
- adapter->q_vector[i]);
- }
-
- ixgbe_reset_q_vectors(adapter);
- } else {
- free_irq(adapter->pdev->irq, adapter);
- }
-}
-
-/**
- * ixgbe_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter)
-{
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB:
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
- if (adapter->num_vfs > 32)
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0);
- break;
- default:
- break;
- }
- IXGBE_WRITE_FLUSH(&adapter->hw);
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- int i;
- for (i = 0; i < adapter->num_msix_vectors; i++)
- synchronize_irq(adapter->msix_entries[i].vector);
- } else {
- synchronize_irq(adapter->pdev->irq);
- }
-}
-
-/**
- * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts
- *
- **/
-static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- IXGBE_WRITE_REG(hw, IXGBE_EITR(0),
- EITR_INTS_PER_SEC_TO_REG(adapter->rx_eitr_param));
-
- ixgbe_set_ivar(adapter, 0, 0, 0);
- ixgbe_set_ivar(adapter, 1, 0, 0);
-
- map_vector_to_rxq(adapter, 0, 0);
- map_vector_to_txq(adapter, 0, 0);
-
- e_info(hw, "Legacy interrupt IVAR setup done\n");
-}
-
-/**
- * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset
- * @adapter: board private structure
- * @ring: structure containing ring specific data
- *
- * Configure the Tx descriptor ring after a reset.
- **/
-void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *ring)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u64 tdba = ring->dma;
- int wait_loop = 10;
- u32 txdctl;
- u8 reg_idx = ring->reg_idx;
-
- /* disable queue to avoid issues while updating state */
- txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx),
- txdctl & ~IXGBE_TXDCTL_ENABLE);
- IXGBE_WRITE_FLUSH(hw);
-
- IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx),
- (tdba & DMA_BIT_MASK(32)));
- IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx),
- ring->count * sizeof(union ixgbe_adv_tx_desc));
- IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0);
- IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0);
- ring->tail = hw->hw_addr + IXGBE_TDT(reg_idx);
-
- /* configure fetching thresholds */
- if (adapter->rx_itr_setting == 0) {
- /* cannot set wthresh when itr==0 */
- txdctl &= ~0x007F0000;
- } else {
- /* enable WTHRESH=8 descriptors, to encourage burst writeback */
- txdctl |= (8 << 16);
- }
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- /* PThresh workaround for Tx hang with DFP enabled. */
- txdctl |= 32;
- }
-
- /* reinitialize flowdirector state */
- if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) &&
- adapter->atr_sample_rate) {
- ring->atr_sample_rate = adapter->atr_sample_rate;
- ring->atr_count = 0;
- set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state);
- } else {
- ring->atr_sample_rate = 0;
- }
-
- clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state);
-
- /* enable queue */
- txdctl |= IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl);
-
- /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */
- if (hw->mac.type == ixgbe_mac_82598EB &&
- !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
- return;
-
- /* poll to verify queue is enabled */
- do {
- usleep_range(1000, 2000);
- txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx));
- } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE));
- if (!wait_loop)
- e_err(drv, "Could not enable Tx Queue %d\n", reg_idx);
-}
-
-static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 rttdcs;
- u32 reg;
- u8 tcs = netdev_get_num_tc(adapter->netdev);
-
- if (hw->mac.type == ixgbe_mac_82598EB)
- return;
-
- /* disable the arbiter while setting MTQC */
- rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
- rttdcs |= IXGBE_RTTDCS_ARBDIS;
- IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
-
- /* set transmit pool layout */
- switch (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- case (IXGBE_FLAG_SRIOV_ENABLED):
- IXGBE_WRITE_REG(hw, IXGBE_MTQC,
- (IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF));
- break;
- default:
- if (!tcs)
- reg = IXGBE_MTQC_64Q_1PB;
- else if (tcs <= 4)
- reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ;
- else
- reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ;
-
- IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg);
-
- /* Enable Security TX Buffer IFG for multiple pb */
- if (tcs) {
- reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG);
- reg |= IXGBE_SECTX_DCB;
- IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg);
- }
- break;
- }
-
- /* re-enable the arbiter */
- rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
- IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
-}
-
-/**
- * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 dmatxctl;
- u32 i;
-
- ixgbe_setup_mtqc(adapter);
-
- if (hw->mac.type != ixgbe_mac_82598EB) {
- /* DMATXCTL.EN must be before Tx queues are enabled */
- dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
- dmatxctl |= IXGBE_DMATXCTL_TE;
- IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
- }
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
- for (i = 0; i < adapter->num_tx_queues; i++)
- ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]);
-}
-
-#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
-
-static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *rx_ring)
-{
- u32 srrctl;
- u8 reg_idx = rx_ring->reg_idx;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82598EB: {
- struct ixgbe_ring_feature *feature = adapter->ring_feature;
- const int mask = feature[RING_F_RSS].mask;
- reg_idx = reg_idx & mask;
- }
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- default:
- break;
- }
-
- srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx));
-
- srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
- srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
- if (adapter->num_vfs)
- srrctl |= IXGBE_SRRCTL_DROP_EN;
-
- srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
- IXGBE_SRRCTL_BSIZEHDR_MASK;
-
- if (ring_is_ps_enabled(rx_ring)) {
-#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER
- srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-#else
- srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
-#endif
- srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
- } else {
- srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >>
- IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
- }
-
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx), srrctl);
-}
-
-static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D,
- 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE,
- 0x6A3E67EA, 0x14364D17, 0x3BED200D};
- u32 mrqc = 0, reta = 0;
- u32 rxcsum;
- int i, j;
- u8 tcs = netdev_get_num_tc(adapter->netdev);
- int maxq = adapter->ring_feature[RING_F_RSS].indices;
-
- if (tcs)
- maxq = min(maxq, adapter->num_tx_queues / tcs);
-
- /* Fill out hash function seeds */
- for (i = 0; i < 10; i++)
- IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]);
-
- /* Fill out redirection table */
- for (i = 0, j = 0; i < 128; i++, j++) {
- if (j == maxq)
- j = 0;
- /* reta = 4-byte sliding window of
- * 0x00..(indices-1)(indices-1)00..etc. */
- reta = (reta << 8) | (j * 0x11);
- if ((i & 3) == 3)
- IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
- }
-
- /* Disable indicating checksum in descriptor, enables RSS hash */
- rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
- rxcsum |= IXGBE_RXCSUM_PCSD;
- IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
-
- if (adapter->hw.mac.type == ixgbe_mac_82598EB &&
- (adapter->flags & IXGBE_FLAG_RSS_ENABLED)) {
- mrqc = IXGBE_MRQC_RSSEN;
- } else {
- int mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED
- | IXGBE_FLAG_SRIOV_ENABLED);
-
- switch (mask) {
- case (IXGBE_FLAG_RSS_ENABLED):
- if (!tcs)
- mrqc = IXGBE_MRQC_RSSEN;
- else if (tcs <= 4)
- mrqc = IXGBE_MRQC_RTRSS4TCEN;
- else
- mrqc = IXGBE_MRQC_RTRSS8TCEN;
- break;
- case (IXGBE_FLAG_SRIOV_ENABLED):
- mrqc = IXGBE_MRQC_VMDQEN;
- break;
- default:
- break;
- }
- }
-
- /* Perform hash on these packet types */
- mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4
- | IXGBE_MRQC_RSS_FIELD_IPV4_TCP
- | IXGBE_MRQC_RSS_FIELD_IPV6
- | IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
-
- IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
-}
-
-/**
- * ixgbe_configure_rscctl - enable RSC for the indicated ring
- * @adapter: address of board private structure
- * @index: index of ring to set
- **/
-static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *ring)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 rscctrl;
- int rx_buf_len;
- u8 reg_idx = ring->reg_idx;
-
- if (!ring_is_rsc_enabled(ring))
- return;
-
- rx_buf_len = ring->rx_buf_len;
- rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx));
- rscctrl |= IXGBE_RSCCTL_RSCEN;
- /*
- * we must limit the number of descriptors so that the
- * total size of max desc * buf_len is not greater
- * than 65535
- */
- if (ring_is_ps_enabled(ring)) {
-#if (MAX_SKB_FRAGS > 16)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
-#elif (MAX_SKB_FRAGS > 8)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
-#elif (MAX_SKB_FRAGS > 4)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
-#else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_1;
-#endif
- } else {
- if (rx_buf_len < IXGBE_RXBUFFER_4096)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_16;
- else if (rx_buf_len < IXGBE_RXBUFFER_8192)
- rscctrl |= IXGBE_RSCCTL_MAXDESC_8;
- else
- rscctrl |= IXGBE_RSCCTL_MAXDESC_4;
- }
- IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl);
-}
-
-/**
- * ixgbe_set_uta - Set unicast filter table address
- * @adapter: board private structure
- *
- * The unicast table address is a register array of 32-bit registers.
- * The table is meant to be used in a way similar to how the MTA is used
- * however due to certain limitations in the hardware it is necessary to
- * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
- * enable bit to allow vlan tag stripping when promiscuous mode is enabled
- **/
-static void ixgbe_set_uta(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int i;
-
- /* The UTA table only exists on 82599 hardware and newer */
- if (hw->mac.type < ixgbe_mac_82599EB)
- return;
-
- /* we only need to do this if VMDq is enabled */
- if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
- return;
-
- for (i = 0; i < 128; i++)
- IXGBE_WRITE_REG(hw, IXGBE_UTA(i), ~0);
-}
-
-#define IXGBE_MAX_RX_DESC_POLL 10
-static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *ring)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int wait_loop = IXGBE_MAX_RX_DESC_POLL;
- u32 rxdctl;
- u8 reg_idx = ring->reg_idx;
-
- /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */
- if (hw->mac.type == ixgbe_mac_82598EB &&
- !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
- return;
-
- do {
- usleep_range(1000, 2000);
- rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
- } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE));
-
- if (!wait_loop) {
- e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within "
- "the polling period\n", reg_idx);
- }
-}
-
-void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *ring)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int wait_loop = IXGBE_MAX_RX_DESC_POLL;
- u32 rxdctl;
- u8 reg_idx = ring->reg_idx;
-
- rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
- rxdctl &= ~IXGBE_RXDCTL_ENABLE;
-
- /* write value back with RXDCTL.ENABLE bit cleared */
- IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
-
- if (hw->mac.type == ixgbe_mac_82598EB &&
- !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP))
- return;
-
- /* the hardware may take up to 100us to really disable the rx queue */
- do {
- udelay(10);
- rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
- } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE));
-
- if (!wait_loop) {
- e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within "
- "the polling period\n", reg_idx);
- }
-}
-
-void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *ring)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u64 rdba = ring->dma;
- u32 rxdctl;
- u8 reg_idx = ring->reg_idx;
-
- /* disable queue to avoid issues while updating state */
- rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx));
- ixgbe_disable_rx_queue(adapter, ring);
-
- IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32)));
- IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx),
- ring->count * sizeof(union ixgbe_adv_rx_desc));
- IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0);
- IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0);
- ring->tail = hw->hw_addr + IXGBE_RDT(reg_idx);
-
- ixgbe_configure_srrctl(adapter, ring);
- ixgbe_configure_rscctl(adapter, ring);
-
- /* If operating in IOV mode set RLPML for X540 */
- if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) &&
- hw->mac.type == ixgbe_mac_X540) {
- rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
- rxdctl |= ((ring->netdev->mtu + ETH_HLEN +
- ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN);
- }
-
- if (hw->mac.type == ixgbe_mac_82598EB) {
- /*
- * enable cache line friendly hardware writes:
- * PTHRESH=32 descriptors (half the internal cache),
- * this also removes ugly rx_no_buffer_count increment
- * HTHRESH=4 descriptors (to minimize latency on fetch)
- * WTHRESH=8 burst writeback up to two cache lines
- */
- rxdctl &= ~0x3FFFFF;
- rxdctl |= 0x080420;
- }
-
- /* enable receive descriptor ring */
- rxdctl |= IXGBE_RXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl);
-
- ixgbe_rx_desc_queue_enable(adapter, ring);
- ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring));
-}
-
-static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int p;
-
- /* PSRTYPE must be initialized in non 82598 adapters */
- u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
- IXGBE_PSRTYPE_UDPHDR |
- IXGBE_PSRTYPE_IPV4HDR |
- IXGBE_PSRTYPE_L2HDR |
- IXGBE_PSRTYPE_IPV6HDR;
-
- if (hw->mac.type == ixgbe_mac_82598EB)
- return;
-
- if (adapter->flags & IXGBE_FLAG_RSS_ENABLED)
- psrtype |= (adapter->num_rx_queues_per_pool << 29);
-
- for (p = 0; p < adapter->num_rx_pools; p++)
- IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(adapter->num_vfs + p),
- psrtype);
-}
-
-static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 gcr_ext;
- u32 vt_reg_bits;
- u32 reg_offset, vf_shift;
- u32 vmdctl;
-
- if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED))
- return;
-
- vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL);
- vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN | IXGBE_VT_CTL_REPLEN;
- vt_reg_bits |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT);
- IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits);
-
- vf_shift = adapter->num_vfs % 32;
- reg_offset = (adapter->num_vfs > 32) ? 1 : 0;
-
- /* Enable only the PF's pool for Tx/Rx */
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), 0);
- IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
-
- /* Map PF MAC address in RAR Entry 0 to first pool following VFs */
- hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs);
-
- /*
- * Set up VF register offsets for selected VT Mode,
- * i.e. 32 or 64 VFs for SR-IOV
- */
- gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT);
- gcr_ext |= IXGBE_GCR_EXT_MSIX_EN;
- gcr_ext |= IXGBE_GCR_EXT_VT_MODE_64;
- IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext);
-
- /* enable Tx loopback for VF/PF communication */
- IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN);
- /* Enable MAC Anti-Spoofing */
- hw->mac.ops.set_mac_anti_spoofing(hw,
- (adapter->antispoofing_enabled =
- (adapter->num_vfs != 0)),
- adapter->num_vfs);
-}
-
-static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- int rx_buf_len;
- struct ixgbe_ring *rx_ring;
- int i;
- u32 mhadd, hlreg0;
-
- /* Decide whether to use packet split mode or not */
- /* On by default */
- adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
-
- /* Do not use packet split if we're in SR-IOV Mode */
- if (adapter->num_vfs)
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
-
- /* Disable packet split due to 82599 erratum #45 */
- if (hw->mac.type == ixgbe_mac_82599EB)
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
-
- /* Set the RX buffer length according to the mode */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- rx_buf_len = IXGBE_RX_HDR_SIZE;
- } else {
- if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
- (netdev->mtu <= ETH_DATA_LEN))
- rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- else
- rx_buf_len = ALIGN(max_frame + VLAN_HLEN, 1024);
- }
-
-#ifdef IXGBE_FCOE
- /* adjust max frame to be able to do baby jumbo for FCoE */
- if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
- (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE))
- max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE;
-
-#endif /* IXGBE_FCOE */
- mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
- if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) {
- mhadd &= ~IXGBE_MHADD_MFS_MASK;
- mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT;
-
- IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
- }
-
- hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0);
- /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */
- hlreg0 |= IXGBE_HLREG0_JUMBOEN;
- IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
-
- /*
- * Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring
- */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rx_ring = adapter->rx_ring[i];
- rx_ring->rx_buf_len = rx_buf_len;
-
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)
- set_ring_ps_enabled(rx_ring);
- else
- clear_ring_ps_enabled(rx_ring);
-
- if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
- set_ring_rsc_enabled(rx_ring);
- else
- clear_ring_rsc_enabled(rx_ring);
-
-#ifdef IXGBE_FCOE
- if (netdev->features & NETIF_F_FCOE_MTU) {
- struct ixgbe_ring_feature *f;
- f = &adapter->ring_feature[RING_F_FCOE];
- if ((i >= f->mask) && (i < f->mask + f->indices)) {
- clear_ring_ps_enabled(rx_ring);
- if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE)
- rx_ring->rx_buf_len =
- IXGBE_FCOE_JUMBO_FRAME_SIZE;
- } else if (!ring_is_rsc_enabled(rx_ring) &&
- !ring_is_ps_enabled(rx_ring)) {
- rx_ring->rx_buf_len =
- IXGBE_FCOE_JUMBO_FRAME_SIZE;
- }
- }
-#endif /* IXGBE_FCOE */
- }
-}
-
-static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- /*
- * For VMDq support of different descriptor types or
- * buffer sizes through the use of multiple SRRCTL
- * registers, RDRXCTL.MVMEN must be set to 1
- *
- * also, the manual doesn't mention it clearly but DCA hints
- * will only use queue 0's tags unless this bit is set. Side
- * effects of setting this bit are only that SRRCTL must be
- * fully programmed [0..15]
- */
- rdrxctl |= IXGBE_RDRXCTL_MVMEN;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- /* Disable RSC for ACK packets */
- IXGBE_WRITE_REG(hw, IXGBE_RSCDBU,
- (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU)));
- rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
- /* hardware requires some bits to be set by default */
- rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX);
- rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP;
- break;
- default:
- /* We should do nothing since we don't know this hardware */
- return;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl);
-}
-
-/**
- * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-static void ixgbe_configure_rx(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int i;
- u32 rxctrl;
-
- /* disable receives while setting up the descriptors */
- rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
-
- ixgbe_setup_psrtype(adapter);
- ixgbe_setup_rdrxctl(adapter);
-
- /* Program registers for the distribution of queues */
- ixgbe_setup_mrqc(adapter);
-
- ixgbe_set_uta(adapter);
-
- /* set_rx_buffer_len must be called before ring initialization */
- ixgbe_set_rx_buffer_len(adapter);
-
- /*
- * Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring
- */
- for (i = 0; i < adapter->num_rx_queues; i++)
- ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]);
-
- /* disable drop enable for 82598 parts */
- if (hw->mac.type == ixgbe_mac_82598EB)
- rxctrl |= IXGBE_RXCTRL_DMBYPS;
-
- /* enable all receives */
- rxctrl |= IXGBE_RXCTRL_RXEN;
- hw->mac.ops.enable_rx_dma(hw, rxctrl);
-}
-
-static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int pool_ndx = adapter->num_vfs;
-
- /* add VID to filter table */
- hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true);
- set_bit(vid, adapter->active_vlans);
-}
-
-static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int pool_ndx = adapter->num_vfs;
-
- /* remove VID from filter table */
- hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false);
- clear_bit(vid, adapter->active_vlans);
-}
-
-/**
- * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering
- * @adapter: driver data
- */
-static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
-
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
-}
-
-/**
- * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering
- * @adapter: driver data
- */
-static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
-
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl |= IXGBE_VLNCTRL_VFE;
- vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
-}
-
-/**
- * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping
- * @adapter: driver data
- */
-static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
- int i, j;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl &= ~IXGBE_VLNCTRL_VME;
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i]->reg_idx;
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
- vlnctrl &= ~IXGBE_RXDCTL_VME;
- IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
- }
- break;
- default:
- break;
- }
-}
-
-/**
- * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping
- * @adapter: driver data
- */
-static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vlnctrl;
- int i, j;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
- vlnctrl |= IXGBE_VLNCTRL_VME;
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i]->reg_idx;
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j));
- vlnctrl |= IXGBE_RXDCTL_VME;
- IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl);
- }
- break;
- default:
- break;
- }
-}
-
-static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
-{
- u16 vid;
-
- ixgbe_vlan_rx_add_vid(adapter->netdev, 0);
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- ixgbe_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-/**
- * ixgbe_write_uc_addr_list - write unicast addresses to RAR table
- * @netdev: network interface device structure
- *
- * Writes unicast address list to the RAR table.
- * Returns: -ENOMEM on failure/insufficient address space
- * 0 on no addresses written
- * X on writing X addresses to the RAR table
- **/
-static int ixgbe_write_uc_addr_list(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- unsigned int vfn = adapter->num_vfs;
- unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS;
- int count = 0;
-
- /* return ENOMEM indicating insufficient memory for addresses */
- if (netdev_uc_count(netdev) > rar_entries)
- return -ENOMEM;
-
- if (!netdev_uc_empty(netdev) && rar_entries) {
- struct netdev_hw_addr *ha;
- /* return error if we do not support writing to RAR table */
- if (!hw->mac.ops.set_rar)
- return -ENOMEM;
-
- netdev_for_each_uc_addr(ha, netdev) {
- if (!rar_entries)
- break;
- hw->mac.ops.set_rar(hw, rar_entries--, ha->addr,
- vfn, IXGBE_RAH_AV);
- count++;
- }
- }
- /* write the addresses in reverse order to avoid write combining */
- for (; rar_entries > 0 ; rar_entries--)
- hw->mac.ops.clear_rar(hw, rar_entries);
-
- return count;
-}
-
-/**
- * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set
- * @netdev: network interface device structure
- *
- * The set_rx_method entry point is called whenever the unicast/multicast
- * address list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper unicast, multicast and
- * promiscuous mode.
- **/
-void ixgbe_set_rx_mode(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
- int count;
-
- /* Check for Promiscuous and All Multicast modes */
-
- fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
-
- /* set all bits that we expect to always be set */
- fctrl |= IXGBE_FCTRL_BAM;
- fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */
- fctrl |= IXGBE_FCTRL_PMCF;
-
- /* clear the bits we are changing the status of */
- fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
-
- if (netdev->flags & IFF_PROMISC) {
- hw->addr_ctrl.user_set_promisc = true;
- fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
- vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE);
- /* don't hardware filter vlans in promisc mode */
- ixgbe_vlan_filter_disable(adapter);
- } else {
- if (netdev->flags & IFF_ALLMULTI) {
- fctrl |= IXGBE_FCTRL_MPE;
- vmolr |= IXGBE_VMOLR_MPE;
- } else {
- /*
- * Write addresses to the MTA, if the attempt fails
- * then we should just turn on promiscuous mode so
- * that we can at least receive multicast traffic
- */
- hw->mac.ops.update_mc_addr_list(hw, netdev);
- vmolr |= IXGBE_VMOLR_ROMPE;
- }
- ixgbe_vlan_filter_enable(adapter);
- hw->addr_ctrl.user_set_promisc = false;
- /*
- * Write addresses to available RAR registers, if there is not
- * sufficient space to store all the addresses then enable
- * unicast promiscuous mode
- */
- count = ixgbe_write_uc_addr_list(netdev);
- if (count < 0) {
- fctrl |= IXGBE_FCTRL_UPE;
- vmolr |= IXGBE_VMOLR_ROPE;
- }
- }
-
- if (adapter->num_vfs) {
- ixgbe_restore_vf_multicasts(adapter);
- vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) &
- ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE |
- IXGBE_VMOLR_ROPE);
- IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr);
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
-
- if (netdev->features & NETIF_F_HW_VLAN_RX)
- ixgbe_vlan_strip_enable(adapter);
- else
- ixgbe_vlan_strip_disable(adapter);
-}
-
-static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter)
-{
- int q_idx;
- struct ixgbe_q_vector *q_vector;
- int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /* legacy and MSI only use one vector */
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
- q_vectors = 1;
-
- for (q_idx = 0; q_idx < q_vectors; q_idx++) {
- struct napi_struct *napi;
- q_vector = adapter->q_vector[q_idx];
- napi = &q_vector->napi;
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- if (!q_vector->rx.count || !q_vector->tx.count) {
- if (q_vector->tx.count == 1)
- napi->poll = &ixgbe_clean_txonly;
- else if (q_vector->rx.count == 1)
- napi->poll = &ixgbe_clean_rxonly;
- }
- }
-
- napi_enable(napi);
- }
-}
-
-static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter)
-{
- int q_idx;
- struct ixgbe_q_vector *q_vector;
- int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /* legacy and MSI only use one vector */
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED))
- q_vectors = 1;
-
- for (q_idx = 0; q_idx < q_vectors; q_idx++) {
- q_vector = adapter->q_vector[q_idx];
- napi_disable(&q_vector->napi);
- }
-}
-
-#ifdef CONFIG_IXGBE_DCB
-/*
- * ixgbe_configure_dcb - Configure DCB hardware
- * @adapter: ixgbe adapter struct
- *
- * This is called by the driver on open to configure the DCB hardware.
- * This is also called by the gennetlink interface when reconfiguring
- * the DCB state.
- */
-static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
-
- if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) {
- if (hw->mac.type == ixgbe_mac_82598EB)
- netif_set_gso_max_size(adapter->netdev, 65536);
- return;
- }
-
- if (hw->mac.type == ixgbe_mac_82598EB)
- netif_set_gso_max_size(adapter->netdev, 32768);
-
-
- /* Enable VLAN tag insert/strip */
- adapter->netdev->features |= NETIF_F_HW_VLAN_RX;
-
- hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true);
-
- /* reconfigure the hardware */
- if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) {
-#ifdef CONFIG_FCOE
- if (adapter->netdev->features & NETIF_F_FCOE_MTU)
- max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
-#endif
- ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
- DCB_TX_CONFIG);
- ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame,
- DCB_RX_CONFIG);
- ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg);
- } else {
- struct net_device *dev = adapter->netdev;
-
- if (adapter->ixgbe_ieee_ets)
- dev->dcbnl_ops->ieee_setets(dev,
- adapter->ixgbe_ieee_ets);
- if (adapter->ixgbe_ieee_pfc)
- dev->dcbnl_ops->ieee_setpfc(dev,
- adapter->ixgbe_ieee_pfc);
- }
-
- /* Enable RSS Hash per TC */
- if (hw->mac.type != ixgbe_mac_82598EB) {
- int i;
- u32 reg = 0;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- u8 msb = 0;
- u8 cnt = adapter->netdev->tc_to_txq[i].count;
-
- while (cnt >>= 1)
- msb++;
-
- reg |= msb << IXGBE_RQTC_SHIFT_TC(i);
- }
- IXGBE_WRITE_REG(hw, IXGBE_RQTC, reg);
- }
-}
-
-#endif
-
-static void ixgbe_configure_pb(struct ixgbe_adapter *adapter)
-{
- int hdrm = 0;
- int num_tc = netdev_get_num_tc(adapter->netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE ||
- adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)
- hdrm = 64 << adapter->fdir_pballoc;
-
- hw->mac.ops.set_rxpba(&adapter->hw, num_tc, hdrm, PBA_STRATEGY_EQUAL);
-}
-
-static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct hlist_node *node, *node2;
- struct ixgbe_fdir_filter *filter;
-
- spin_lock(&adapter->fdir_perfect_lock);
-
- if (!hlist_empty(&adapter->fdir_filter_list))
- ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask);
-
- hlist_for_each_entry_safe(filter, node, node2,
- &adapter->fdir_filter_list, fdir_node) {
- ixgbe_fdir_write_perfect_filter_82599(hw,
- &filter->filter,
- filter->sw_idx,
- (filter->action == IXGBE_FDIR_DROP_QUEUE) ?
- IXGBE_FDIR_DROP_QUEUE :
- adapter->rx_ring[filter->action]->reg_idx);
- }
-
- spin_unlock(&adapter->fdir_perfect_lock);
-}
-
-static void ixgbe_configure(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- int i;
-
- ixgbe_configure_pb(adapter);
-#ifdef CONFIG_IXGBE_DCB
- ixgbe_configure_dcb(adapter);
-#endif
-
- ixgbe_set_rx_mode(netdev);
- ixgbe_restore_vlan(adapter);
-
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- ixgbe_configure_fcoe(adapter);
-
-#endif /* IXGBE_FCOE */
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i]->atr_sample_rate =
- adapter->atr_sample_rate;
- ixgbe_init_fdir_signature_82599(hw, adapter->fdir_pballoc);
- } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) {
- ixgbe_init_fdir_perfect_82599(&adapter->hw,
- adapter->fdir_pballoc);
- ixgbe_fdir_filter_restore(adapter);
- }
- ixgbe_configure_virtualization(adapter);
-
- ixgbe_configure_tx(adapter);
- ixgbe_configure_rx(adapter);
-}
-
-static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw)
-{
- switch (hw->phy.type) {
- case ixgbe_phy_sfp_avago:
- case ixgbe_phy_sfp_ftl:
- case ixgbe_phy_sfp_intel:
- case ixgbe_phy_sfp_unknown:
- case ixgbe_phy_sfp_passive_tyco:
- case ixgbe_phy_sfp_passive_unknown:
- case ixgbe_phy_sfp_active_unknown:
- case ixgbe_phy_sfp_ftl_active:
- return true;
- default:
- return false;
- }
-}
-
-/**
- * ixgbe_sfp_link_config - set up SFP+ link
- * @adapter: pointer to private adapter struct
- **/
-static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter)
-{
- /*
- * We are assuming the worst case scenerio here, and that
- * is that an SFP was inserted/removed after the reset
- * but before SFP detection was enabled. As such the best
- * solution is to just start searching as soon as we start
- */
- if (adapter->hw.mac.type == ixgbe_mac_82598EB)
- adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
-
- adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
-}
-
-/**
- * ixgbe_non_sfp_link_config - set up non-SFP+ link
- * @hw: pointer to private hardware struct
- *
- * Returns 0 on success, negative on failure
- **/
-static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
-{
- u32 autoneg;
- bool negotiation, link_up = false;
- u32 ret = IXGBE_ERR_LINK_SETUP;
-
- if (hw->mac.ops.check_link)
- ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false);
-
- if (ret)
- goto link_cfg_out;
-
- autoneg = hw->phy.autoneg_advertised;
- if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
- ret = hw->mac.ops.get_link_capabilities(hw, &autoneg,
- &negotiation);
- if (ret)
- goto link_cfg_out;
-
- if (hw->mac.ops.setup_link)
- ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up);
-link_cfg_out:
- return ret;
-}
-
-static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 gpie = 0;
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT |
- IXGBE_GPIE_OCD;
- gpie |= IXGBE_GPIE_EIAME;
- /*
- * use EIAM to auto-mask when MSI-X interrupt is asserted
- * this saves a register write for every interrupt
- */
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- default:
- IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
- IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
- break;
- }
- } else {
- /* legacy interrupts, use EIAM to auto-mask when reading EICR,
- * specifically only auto mask tx and rx interrupts */
- IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
- }
-
- /* XXX: to interrupt immediately for EICS writes, enable this */
- /* gpie |= IXGBE_GPIE_EIMEN; */
-
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- gpie &= ~IXGBE_GPIE_VTMODE_MASK;
- gpie |= IXGBE_GPIE_VTMODE_64;
- }
-
- /* Enable fan failure interrupt */
- if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE)
- gpie |= IXGBE_SDP1_GPIEN;
-
- if (hw->mac.type == ixgbe_mac_82599EB) {
- gpie |= IXGBE_SDP1_GPIEN;
- gpie |= IXGBE_SDP2_GPIEN;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
-}
-
-static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int err;
- u32 ctrl_ext;
-
- ixgbe_get_hw_control(adapter);
- ixgbe_setup_gpie(adapter);
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
- ixgbe_configure_msix(adapter);
- else
- ixgbe_configure_msi_and_legacy(adapter);
-
- /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.enable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
- hw->mac.ops.enable_tx_laser(hw);
-
- clear_bit(__IXGBE_DOWN, &adapter->state);
- ixgbe_napi_enable_all(adapter);
-
- if (ixgbe_is_sfp(hw)) {
- ixgbe_sfp_link_config(adapter);
- } else {
- err = ixgbe_non_sfp_link_config(hw);
- if (err)
- e_err(probe, "link_config FAILED %d\n", err);
- }
-
- /* clear any pending interrupts, may auto mask */
- IXGBE_READ_REG(hw, IXGBE_EICR);
- ixgbe_irq_enable(adapter, true, true);
-
- /*
- * If this adapter has a fan, check to see if we had a failure
- * before we enabled the interrupt.
- */
- if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
- u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
- if (esdp & IXGBE_ESDP_SDP1)
- e_crit(drv, "Fan has stopped, replace the adapter\n");
- }
-
- /* enable transmits */
- netif_tx_start_all_queues(adapter->netdev);
-
- /* bring the link up in the watchdog, this could race with our first
- * link up interrupt but shouldn't be a problem */
- adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
- adapter->link_check_timeout = jiffies;
- mod_timer(&adapter->service_timer, jiffies);
-
- /* Set PF Reset Done bit so PF/VF Mail Ops can work */
- ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
- ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
-
- return 0;
-}
-
-void ixgbe_reinit_locked(struct ixgbe_adapter *adapter)
-{
- WARN_ON(in_interrupt());
- /* put off any impending NetWatchDogTimeout */
- adapter->netdev->trans_start = jiffies;
-
- while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state))
- usleep_range(1000, 2000);
- ixgbe_down(adapter);
- /*
- * If SR-IOV enabled then wait a bit before bringing the adapter
- * back up to give the VFs time to respond to the reset. The
- * two second wait is based upon the watchdog timer cycle in
- * the VF driver.
- */
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
- msleep(2000);
- ixgbe_up(adapter);
- clear_bit(__IXGBE_RESETTING, &adapter->state);
-}
-
-int ixgbe_up(struct ixgbe_adapter *adapter)
-{
- /* hardware has been reset, we need to reload some things */
- ixgbe_configure(adapter);
-
- return ixgbe_up_complete(adapter);
-}
-
-void ixgbe_reset(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int err;
-
- /* lock SFP init bit to prevent race conditions with the watchdog */
- while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
- usleep_range(1000, 2000);
-
- /* clear all SFP and link config related flags while holding SFP_INIT */
- adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP |
- IXGBE_FLAG2_SFP_NEEDS_RESET);
- adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
-
- err = hw->mac.ops.init_hw(hw);
- switch (err) {
- case 0:
- case IXGBE_ERR_SFP_NOT_PRESENT:
- case IXGBE_ERR_SFP_NOT_SUPPORTED:
- break;
- case IXGBE_ERR_MASTER_REQUESTS_PENDING:
- e_dev_err("master disable timed out\n");
- break;
- case IXGBE_ERR_EEPROM_VERSION:
- /* We are running on a pre-production device, log a warning */
- e_dev_warn("This device is a pre-production adapter/LOM. "
- "Please be aware there may be issuesassociated with "
- "your hardware. If you are experiencing problems "
- "please contact your Intel or hardware "
- "representative who provided you with this "
- "hardware.\n");
- break;
- default:
- e_dev_err("Hardware Error: %d\n", err);
- }
-
- clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
-
- /* reprogram the RAR[0] in case user changed it. */
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
- IXGBE_RAH_AV);
-}
-
-/**
- * ixgbe_clean_rx_ring - Free Rx Buffers per Queue
- * @rx_ring: ring to free buffers from
- **/
-static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
-{
- struct device *dev = rx_ring->dev;
- unsigned long size;
- u16 i;
-
- /* ring already cleared, nothing to do */
- if (!rx_ring->rx_buffer_info)
- return;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- struct ixgbe_rx_buffer *rx_buffer_info;
-
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
- if (rx_buffer_info->dma) {
- dma_unmap_single(rx_ring->dev, rx_buffer_info->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- rx_buffer_info->dma = 0;
- }
- if (rx_buffer_info->skb) {
- struct sk_buff *skb = rx_buffer_info->skb;
- rx_buffer_info->skb = NULL;
- do {
- struct sk_buff *this = skb;
- if (IXGBE_RSC_CB(this)->delay_unmap) {
- dma_unmap_single(dev,
- IXGBE_RSC_CB(this)->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- IXGBE_RSC_CB(this)->dma = 0;
- IXGBE_RSC_CB(skb)->delay_unmap = false;
- }
- skb = skb->prev;
- dev_kfree_skb(this);
- } while (skb);
- }
- if (!rx_buffer_info->page)
- continue;
- if (rx_buffer_info->page_dma) {
- dma_unmap_page(dev, rx_buffer_info->page_dma,
- PAGE_SIZE / 2, DMA_FROM_DEVICE);
- rx_buffer_info->page_dma = 0;
- }
- put_page(rx_buffer_info->page);
- rx_buffer_info->page = NULL;
- rx_buffer_info->page_offset = 0;
- }
-
- size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
- memset(rx_ring->rx_buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-}
-
-/**
- * ixgbe_clean_tx_ring - Free Tx Buffers
- * @tx_ring: ring to be cleaned
- **/
-static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring)
-{
- struct ixgbe_tx_buffer *tx_buffer_info;
- unsigned long size;
- u16 i;
-
- /* ring already cleared, nothing to do */
- if (!tx_ring->tx_buffer_info)
- return;
-
- /* Free all the Tx ring sk_buffs */
- for (i = 0; i < tx_ring->count; i++) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
- }
-
- size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
- memset(tx_ring->tx_buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-}
-
-/**
- * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues
- * @adapter: board private structure
- **/
-static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- ixgbe_clean_rx_ring(adapter->rx_ring[i]);
-}
-
-/**
- * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues
- * @adapter: board private structure
- **/
-static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- ixgbe_clean_tx_ring(adapter->tx_ring[i]);
-}
-
-static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter)
-{
- struct hlist_node *node, *node2;
- struct ixgbe_fdir_filter *filter;
-
- spin_lock(&adapter->fdir_perfect_lock);
-
- hlist_for_each_entry_safe(filter, node, node2,
- &adapter->fdir_filter_list, fdir_node) {
- hlist_del(&filter->fdir_node);
- kfree(filter);
- }
- adapter->fdir_filter_count = 0;
-
- spin_unlock(&adapter->fdir_perfect_lock);
-}
-
-void ixgbe_down(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 rxctrl;
- int i;
- int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /* signal that we are down to the interrupt handler */
- set_bit(__IXGBE_DOWN, &adapter->state);
-
- /* disable receives */
- rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
- IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN);
-
- /* disable all enabled rx queues */
- for (i = 0; i < adapter->num_rx_queues; i++)
- /* this call also flushes the previous write */
- ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]);
-
- usleep_range(10000, 20000);
-
- netif_tx_stop_all_queues(netdev);
-
- /* call carrier off first to avoid false dev_watchdog timeouts */
- netif_carrier_off(netdev);
- netif_tx_disable(netdev);
-
- ixgbe_irq_disable(adapter);
-
- ixgbe_napi_disable_all(adapter);
-
- adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT |
- IXGBE_FLAG2_RESET_REQUESTED);
- adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
-
- del_timer_sync(&adapter->service_timer);
-
- /* disable receive for all VFs and wait one second */
- if (adapter->num_vfs) {
- /* ping all the active vfs to let them know we are going down */
- ixgbe_ping_all_vfs(adapter);
-
- /* Disable all VFTE/VFRE TX/RX */
- ixgbe_disable_tx_rx(adapter);
-
- /* Mark all the VFs as inactive */
- for (i = 0 ; i < adapter->num_vfs; i++)
- adapter->vfinfo[i].clear_to_send = 0;
- }
-
- /* Cleanup the affinity_hint CPU mask memory and callback */
- for (i = 0; i < num_q_vectors; i++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
- /* clear the affinity_mask in the IRQ descriptor */
- irq_set_affinity_hint(adapter->msix_entries[i]. vector, NULL);
- /* release the CPU mask memory */
- free_cpumask_var(q_vector->affinity_mask);
- }
-
- /* disable transmits in the hardware now that interrupts are off */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- u8 reg_idx = adapter->tx_ring[i]->reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH);
- }
-
- /* Disable the Tx DMA engine on 82599 and X540 */
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL,
- (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) &
- ~IXGBE_DMATXCTL_TE));
- break;
- default:
- break;
- }
-
- if (!pci_channel_offline(adapter->pdev))
- ixgbe_reset(adapter);
-
- /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.disable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
- hw->mac.ops.disable_tx_laser(hw);
-
- ixgbe_clean_all_tx_rings(adapter);
- ixgbe_clean_all_rx_rings(adapter);
-
-#ifdef CONFIG_IXGBE_DCA
- /* since we reset the hardware DCA settings were cleared */
- ixgbe_setup_dca(adapter);
-#endif
-}
-
-/**
- * ixgbe_poll - NAPI Rx polling callback
- * @napi: structure for representing this polling device
- * @budget: how many packets driver is allowed to clean
- *
- * This function is used for legacy and MSI, NAPI mode
- **/
-static int ixgbe_poll(struct napi_struct *napi, int budget)
-{
- struct ixgbe_q_vector *q_vector =
- container_of(napi, struct ixgbe_q_vector, napi);
- struct ixgbe_adapter *adapter = q_vector->adapter;
- int tx_clean_complete, work_done = 0;
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED)
- ixgbe_update_dca(q_vector);
-#endif
-
- tx_clean_complete = ixgbe_clean_tx_irq(q_vector, adapter->tx_ring[0]);
- ixgbe_clean_rx_irq(q_vector, adapter->rx_ring[0], &work_done, budget);
-
- if (!tx_clean_complete)
- work_done = budget;
-
- /* If budget not fully consumed, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->rx_itr_setting & 1)
- ixgbe_set_itr(q_vector);
- if (!test_bit(__IXGBE_DOWN, &adapter->state))
- ixgbe_irq_enable_queues(adapter, IXGBE_EIMS_RTX_QUEUE);
- }
- return work_done;
-}
-
-/**
- * ixgbe_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-static void ixgbe_tx_timeout(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- ixgbe_tx_timeout_reset(adapter);
-}
-
-/**
- * ixgbe_set_rss_queues: Allocate queues for RSS
- * @adapter: board private structure to initialize
- *
- * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try
- * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU.
- *
- **/
-static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter)
-{
- bool ret = false;
- struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS];
-
- if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- f->mask = 0xF;
- adapter->num_rx_queues = f->indices;
- adapter->num_tx_queues = f->indices;
- ret = true;
- } else {
- ret = false;
- }
-
- return ret;
-}
-
-/**
- * ixgbe_set_fdir_queues: Allocate queues for Flow Director
- * @adapter: board private structure to initialize
- *
- * Flow Director is an advanced Rx filter, attempting to get Rx flows back
- * to the original CPU that initiated the Tx session. This runs in addition
- * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the
- * Rx load across CPUs using RSS.
- *
- **/
-static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter)
-{
- bool ret = false;
- struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR];
-
- f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices);
- f_fdir->mask = 0;
-
- /* Flow Director must have RSS enabled */
- if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
- (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) {
- adapter->num_tx_queues = f_fdir->indices;
- adapter->num_rx_queues = f_fdir->indices;
- ret = true;
- } else {
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- }
- return ret;
-}
-
-#ifdef IXGBE_FCOE
-/**
- * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE)
- * @adapter: board private structure to initialize
- *
- * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges.
- * The ring feature mask is not used as a mask for FCoE, as it can take any 8
- * rx queues out of the max number of rx queues, instead, it is used as the
- * index of the first rx queue used by FCoE.
- *
- **/
-static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
-
- if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
- return false;
-
- f->indices = min((int)num_online_cpus(), f->indices);
-
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
-
- if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- e_info(probe, "FCoE enabled with RSS\n");
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
- ixgbe_set_fdir_queues(adapter);
- else
- ixgbe_set_rss_queues(adapter);
- }
-
- /* adding FCoE rx rings to the end */
- f->mask = adapter->num_rx_queues;
- adapter->num_rx_queues += f->indices;
- adapter->num_tx_queues += f->indices;
-
- return true;
-}
-#endif /* IXGBE_FCOE */
-
-/* Artificial max queue cap per traffic class in DCB mode */
-#define DCB_QUEUE_CAP 8
-
-#ifdef CONFIG_IXGBE_DCB
-static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter)
-{
- int per_tc_q, q, i, offset = 0;
- struct net_device *dev = adapter->netdev;
- int tcs = netdev_get_num_tc(dev);
-
- if (!tcs)
- return false;
-
- /* Map queue offset and counts onto allocated tx queues */
- per_tc_q = min(dev->num_tx_queues / tcs, (unsigned int)DCB_QUEUE_CAP);
- q = min((int)num_online_cpus(), per_tc_q);
-
- for (i = 0; i < tcs; i++) {
- netdev_set_prio_tc_map(dev, i, i);
- netdev_set_tc_queue(dev, i, q, offset);
- offset += q;
- }
-
- adapter->num_tx_queues = q * tcs;
- adapter->num_rx_queues = q * tcs;
-
-#ifdef IXGBE_FCOE
- /* FCoE enabled queues require special configuration indexed
- * by feature specific indices and mask. Here we map FCoE
- * indices onto the DCB queue pairs allowing FCoE to own
- * configuration later.
- */
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
- int tc;
- struct ixgbe_ring_feature *f =
- &adapter->ring_feature[RING_F_FCOE];
-
- tc = netdev_get_prio_tc_map(dev, adapter->fcoe.up);
- f->indices = dev->tc_to_txq[tc].count;
- f->mask = dev->tc_to_txq[tc].offset;
- }
-#endif
-
- return true;
-}
-#endif
-
-/**
- * ixgbe_set_sriov_queues: Allocate queues for IOV use
- * @adapter: board private structure to initialize
- *
- * IOV doesn't actually use anything, so just NAK the
- * request for now and let the other queue routines
- * figure out what to do.
- */
-static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter)
-{
- return false;
-}
-
-/*
- * ixgbe_set_num_queues: Allocate queues for device, feature dependent
- * @adapter: board private structure to initialize
- *
- * This is the top level queue allocation routine. The order here is very
- * important, starting with the "most" number of features turned on at once,
- * and ending with the smallest set of features. This way large combinations
- * can be allocated if they're turned on, and smaller combinations are the
- * fallthrough conditions.
- *
- **/
-static int ixgbe_set_num_queues(struct ixgbe_adapter *adapter)
-{
- /* Start with base case */
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
- adapter->num_rx_pools = adapter->num_rx_queues;
- adapter->num_rx_queues_per_pool = 1;
-
- if (ixgbe_set_sriov_queues(adapter))
- goto done;
-
-#ifdef CONFIG_IXGBE_DCB
- if (ixgbe_set_dcb_queues(adapter))
- goto done;
-
-#endif
-#ifdef IXGBE_FCOE
- if (ixgbe_set_fcoe_queues(adapter))
- goto done;
-
-#endif /* IXGBE_FCOE */
- if (ixgbe_set_fdir_queues(adapter))
- goto done;
-
- if (ixgbe_set_rss_queues(adapter))
- goto done;
-
- /* fallback to base case */
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
-
-done:
- /* Notify the stack of the (possibly) reduced queue counts. */
- netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues);
- return netif_set_real_num_rx_queues(adapter->netdev,
- adapter->num_rx_queues);
-}
-
-static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
- int vectors)
-{
- int err, vector_threshold;
-
- /* We'll want at least 3 (vector_threshold):
- * 1) TxQ[0] Cleanup
- * 2) RxQ[0] Cleanup
- * 3) Other (Link Status Change, etc.)
- * 4) TCP Timer (optional)
- */
- vector_threshold = MIN_MSIX_COUNT;
-
- /* The more we get, the more we will assign to Tx/Rx Cleanup
- * for the separate queues...where Rx Cleanup >= Tx Cleanup.
- * Right now, we simply care about how many we'll get; we'll
- * set them up later while requesting irq's.
- */
- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- vectors);
- if (!err) /* Success in acquiring all requested vectors. */
- break;
- else if (err < 0)
- vectors = 0; /* Nasty failure, quit now */
- else /* err == number of vectors we should try again with */
- vectors = err;
- }
-
- if (vectors < vector_threshold) {
- /* Can't allocate enough MSI-X interrupts? Oh well.
- * This just means we'll go with either a single MSI
- * vector or fall back to legacy interrupts.
- */
- netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
- "Unable to allocate MSI-X interrupts\n");
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else {
- adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
- /*
- * Adjust for only the vectors we'll use, which is minimum
- * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
- * vectors we were allocated.
- */
- adapter->num_msix_vectors = min(vectors,
- adapter->max_msix_q_vectors + NON_Q_VECTORS);
- }
-}
-
-/**
- * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS
- * @adapter: board private structure to initialize
- *
- * Cache the descriptor ring offsets for RSS to the assigned rings.
- *
- **/
-static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter)
-{
- int i;
-
- if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
- return false;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->reg_idx = i;
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i]->reg_idx = i;
-
- return true;
-}
-
-#ifdef CONFIG_IXGBE_DCB
-
-/* ixgbe_get_first_reg_idx - Return first register index associated with ring */
-static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc,
- unsigned int *tx, unsigned int *rx)
-{
- struct net_device *dev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u8 num_tcs = netdev_get_num_tc(dev);
-
- *tx = 0;
- *rx = 0;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- *tx = tc << 2;
- *rx = tc << 3;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- if (num_tcs == 8) {
- if (tc < 3) {
- *tx = tc << 5;
- *rx = tc << 4;
- } else if (tc < 5) {
- *tx = ((tc + 2) << 4);
- *rx = tc << 4;
- } else if (tc < num_tcs) {
- *tx = ((tc + 8) << 3);
- *rx = tc << 4;
- }
- } else if (num_tcs == 4) {
- *rx = tc << 5;
- switch (tc) {
- case 0:
- *tx = 0;
- break;
- case 1:
- *tx = 64;
- break;
- case 2:
- *tx = 96;
- break;
- case 3:
- *tx = 112;
- break;
- default:
- break;
- }
- }
- break;
- default:
- break;
- }
-}
-
-/**
- * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB
- * @adapter: board private structure to initialize
- *
- * Cache the descriptor ring offsets for DCB to the assigned rings.
- *
- **/
-static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter)
-{
- struct net_device *dev = adapter->netdev;
- int i, j, k;
- u8 num_tcs = netdev_get_num_tc(dev);
-
- if (!num_tcs)
- return false;
-
- for (i = 0, k = 0; i < num_tcs; i++) {
- unsigned int tx_s, rx_s;
- u16 count = dev->tc_to_txq[i].count;
-
- ixgbe_get_first_reg_idx(adapter, i, &tx_s, &rx_s);
- for (j = 0; j < count; j++, k++) {
- adapter->tx_ring[k]->reg_idx = tx_s + j;
- adapter->rx_ring[k]->reg_idx = rx_s + j;
- adapter->tx_ring[k]->dcb_tc = i;
- adapter->rx_ring[k]->dcb_tc = i;
- }
- }
-
- return true;
-}
-#endif
-
-/**
- * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director
- * @adapter: board private structure to initialize
- *
- * Cache the descriptor ring offsets for Flow Director to the assigned rings.
- *
- **/
-static inline bool ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter)
-{
- int i;
- bool ret = false;
-
- if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
- (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) {
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i]->reg_idx = i;
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i]->reg_idx = i;
- ret = true;
- }
-
- return ret;
-}
-
-#ifdef IXGBE_FCOE
-/**
- * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE
- * @adapter: board private structure to initialize
- *
- * Cache the descriptor ring offsets for FCoE mode to the assigned rings.
- *
- */
-static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE];
- int i;
- u8 fcoe_rx_i = 0, fcoe_tx_i = 0;
-
- if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))
- return false;
-
- if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) {
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)
- ixgbe_cache_ring_fdir(adapter);
- else
- ixgbe_cache_ring_rss(adapter);
-
- fcoe_rx_i = f->mask;
- fcoe_tx_i = f->mask;
- }
- for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) {
- adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i;
- adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i;
- }
- return true;
-}
-
-#endif /* IXGBE_FCOE */
-/**
- * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov
- * @adapter: board private structure to initialize
- *
- * SR-IOV doesn't use any descriptor rings but changes the default if
- * no other mapping is used.
- *
- */
-static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter)
-{
- adapter->rx_ring[0]->reg_idx = adapter->num_vfs * 2;
- adapter->tx_ring[0]->reg_idx = adapter->num_vfs * 2;
- if (adapter->num_vfs)
- return true;
- else
- return false;
-}
-
-/**
- * ixgbe_cache_ring_register - Descriptor ring to register mapping
- * @adapter: board private structure to initialize
- *
- * Once we know the feature-set enabled for the device, we'll cache
- * the register offset the descriptor ring is assigned to.
- *
- * Note, the order the various feature calls is important. It must start with
- * the "most" features enabled at the same time, then trickle down to the
- * least amount of features turned on at once.
- **/
-static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter)
-{
- /* start with default case */
- adapter->rx_ring[0]->reg_idx = 0;
- adapter->tx_ring[0]->reg_idx = 0;
-
- if (ixgbe_cache_ring_sriov(adapter))
- return;
-
-#ifdef CONFIG_IXGBE_DCB
- if (ixgbe_cache_ring_dcb(adapter))
- return;
-#endif
-
-#ifdef IXGBE_FCOE
- if (ixgbe_cache_ring_fcoe(adapter))
- return;
-#endif /* IXGBE_FCOE */
-
- if (ixgbe_cache_ring_fdir(adapter))
- return;
-
- if (ixgbe_cache_ring_rss(adapter))
- return;
-}
-
-/**
- * ixgbe_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- *
- * We allocate one ring per queue at run-time since we don't know the
- * number of queues at compile-time. The polling_netdev array is
- * intended for Multiqueue, but should work fine with a single queue.
- **/
-static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter)
-{
- int rx = 0, tx = 0, nid = adapter->node;
-
- if (nid < 0 || !node_online(nid))
- nid = first_online_node;
-
- for (; tx < adapter->num_tx_queues; tx++) {
- struct ixgbe_ring *ring;
-
- ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
- if (!ring)
- ring = kzalloc(sizeof(*ring), GFP_KERNEL);
- if (!ring)
- goto err_allocation;
- ring->count = adapter->tx_ring_count;
- ring->queue_index = tx;
- ring->numa_node = nid;
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
-
- adapter->tx_ring[tx] = ring;
- }
-
- for (; rx < adapter->num_rx_queues; rx++) {
- struct ixgbe_ring *ring;
-
- ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid);
- if (!ring)
- ring = kzalloc(sizeof(*ring), GFP_KERNEL);
- if (!ring)
- goto err_allocation;
- ring->count = adapter->rx_ring_count;
- ring->queue_index = rx;
- ring->numa_node = nid;
- ring->dev = &adapter->pdev->dev;
- ring->netdev = adapter->netdev;
-
- adapter->rx_ring[rx] = ring;
- }
-
- ixgbe_cache_ring_register(adapter);
-
- return 0;
-
-err_allocation:
- while (tx)
- kfree(adapter->tx_ring[--tx]);
-
- while (rx)
- kfree(adapter->rx_ring[--rx]);
- return -ENOMEM;
-}
-
-/**
- * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported
- * @adapter: board private structure to initialize
- *
- * Attempt to configure the interrupts using the best available
- * capabilities of the hardware and the kernel.
- **/
-static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int err = 0;
- int vector, v_budget;
-
- /*
- * It's easy to be greedy for MSI-X vectors, but it really
- * doesn't do us much good if we have a lot more vectors
- * than CPU's. So let's be conservative and only ask for
- * (roughly) the same number of vectors as there are CPU's.
- */
- v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
- (int)num_online_cpus()) + NON_Q_VECTORS;
-
- /*
- * At the same time, hardware can only support a maximum of
- * hw.mac->max_msix_vectors vectors. With features
- * such as RSS and VMDq, we can easily surpass the number of Rx and Tx
- * descriptor queues supported by our device. Thus, we cap it off in
- * those rare cases where the cpu count also exceeds our vector limit.
- */
- v_budget = min(v_budget, (int)hw->mac.max_msix_vectors);
-
- /* A failure in MSI-X entry allocation isn't fatal, but it does
- * mean we disable MSI-X capabilities of the adapter. */
- adapter->msix_entries = kcalloc(v_budget,
- sizeof(struct msix_entry), GFP_KERNEL);
- if (adapter->msix_entries) {
- for (vector = 0; vector < v_budget; vector++)
- adapter->msix_entries[vector].entry = vector;
-
- ixgbe_acquire_msix_vectors(adapter, v_budget);
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
- goto out;
- }
-
- adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED;
- adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED;
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
- e_err(probe,
- "ATR is not supported while multiple "
- "queues are disabled. Disabling Flow Director\n");
- }
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->atr_sample_rate = 0;
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
- ixgbe_disable_sriov(adapter);
-
- err = ixgbe_set_num_queues(adapter);
- if (err)
- return err;
-
- err = pci_enable_msi(adapter->pdev);
- if (!err) {
- adapter->flags |= IXGBE_FLAG_MSI_ENABLED;
- } else {
- netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev,
- "Unable to allocate MSI interrupt, "
- "falling back to legacy. Error: %d\n", err);
- /* reset err */
- err = 0;
- }
-
-out:
- return err;
-}
-
-/**
- * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * We allocate one q_vector per queue interrupt. If allocation fails we
- * return -ENOMEM.
- **/
-static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter)
-{
- int q_idx, num_q_vectors;
- struct ixgbe_q_vector *q_vector;
- int (*poll)(struct napi_struct *, int);
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- poll = &ixgbe_clean_rxtx_many;
- } else {
- num_q_vectors = 1;
- poll = &ixgbe_poll;
- }
-
- for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
- q_vector = kzalloc_node(sizeof(struct ixgbe_q_vector),
- GFP_KERNEL, adapter->node);
- if (!q_vector)
- q_vector = kzalloc(sizeof(struct ixgbe_q_vector),
- GFP_KERNEL);
- if (!q_vector)
- goto err_out;
- q_vector->adapter = adapter;
- if (q_vector->tx.count && !q_vector->rx.count)
- q_vector->eitr = adapter->tx_eitr_param;
- else
- q_vector->eitr = adapter->rx_eitr_param;
- q_vector->v_idx = q_idx;
- netif_napi_add(adapter->netdev, &q_vector->napi, (*poll), 64);
- adapter->q_vector[q_idx] = q_vector;
- }
-
- return 0;
-
-err_out:
- while (q_idx) {
- q_idx--;
- q_vector = adapter->q_vector[q_idx];
- netif_napi_del(&q_vector->napi);
- kfree(q_vector);
- adapter->q_vector[q_idx] = NULL;
- }
- return -ENOMEM;
-}
-
-/**
- * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * This function frees the memory allocated to the q_vectors. In addition if
- * NAPI is enabled it will delete any references to the NAPI struct prior
- * to freeing the q_vector.
- **/
-static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter)
-{
- int q_idx, num_q_vectors;
-
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED)
- num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- else
- num_q_vectors = 1;
-
- for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[q_idx];
- adapter->q_vector[q_idx] = NULL;
- netif_napi_del(&q_vector->napi);
- kfree(q_vector);
- }
-}
-
-static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter)
-{
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED;
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) {
- adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED;
- pci_disable_msi(adapter->pdev);
- }
-}
-
-/**
- * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme
- * @adapter: board private structure to initialize
- *
- * We determine which interrupt scheme to use based on...
- * - Kernel support (MSI, MSI-X)
- * - which can be user-defined (via MODULE_PARAM)
- * - Hardware queue count (num_*_queues)
- * - defined by miscellaneous hardware support/features (RSS, etc.)
- **/
-int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter)
-{
- int err;
-
- /* Number of supported queues */
- err = ixgbe_set_num_queues(adapter);
- if (err)
- return err;
-
- err = ixgbe_set_interrupt_capability(adapter);
- if (err) {
- e_dev_err("Unable to setup interrupt capabilities\n");
- goto err_set_interrupt;
- }
-
- err = ixgbe_alloc_q_vectors(adapter);
- if (err) {
- e_dev_err("Unable to allocate memory for queue vectors\n");
- goto err_alloc_q_vectors;
- }
-
- err = ixgbe_alloc_queues(adapter);
- if (err) {
- e_dev_err("Unable to allocate memory for queues\n");
- goto err_alloc_queues;
- }
-
- e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n",
- (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled",
- adapter->num_rx_queues, adapter->num_tx_queues);
-
- set_bit(__IXGBE_DOWN, &adapter->state);
-
- return 0;
-
-err_alloc_queues:
- ixgbe_free_q_vectors(adapter);
-err_alloc_q_vectors:
- ixgbe_reset_interrupt_capability(adapter);
-err_set_interrupt:
- return err;
-}
-
-/**
- * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings
- * @adapter: board private structure to clear interrupt scheme on
- *
- * We go through and clear interrupt specific resources and reset the structure
- * to pre-load conditions
- **/
-void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- kfree(adapter->tx_ring[i]);
- adapter->tx_ring[i] = NULL;
- }
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct ixgbe_ring *ring = adapter->rx_ring[i];
-
- /* ixgbe_get_stats64() might access this ring, we must wait
- * a grace period before freeing it.
- */
- kfree_rcu(ring, rcu);
- adapter->rx_ring[i] = NULL;
- }
-
- adapter->num_tx_queues = 0;
- adapter->num_rx_queues = 0;
-
- ixgbe_free_q_vectors(adapter);
- ixgbe_reset_interrupt_capability(adapter);
-}
-
-/**
- * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter)
- * @adapter: board private structure to initialize
- *
- * ixgbe_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- struct net_device *dev = adapter->netdev;
- unsigned int rss;
-#ifdef CONFIG_IXGBE_DCB
- int j;
- struct tc_configuration *tc;
-#endif
- int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->revision_id = pdev->revision;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_device_id = pdev->subsystem_device;
-
- /* Set capability flags */
- rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus());
- adapter->ring_feature[RING_F_RSS].indices = rss;
- adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- if (hw->device_id == IXGBE_DEV_ID_82598AT)
- adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE;
- adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599;
- adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE;
- adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED;
- if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM)
- adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE;
- /* Flow Director hash filters enabled */
- adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->atr_sample_rate = 20;
- adapter->ring_feature[RING_F_FDIR].indices =
- IXGBE_MAX_FDIR_INDICES;
- adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K;
-#ifdef IXGBE_FCOE
- adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
- adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
- adapter->ring_feature[RING_F_FCOE].indices = 0;
-#ifdef CONFIG_IXGBE_DCB
- /* Default traffic class to use for FCoE */
- adapter->fcoe.up = IXGBE_FCOE_DEFTC;
-#endif
-#endif /* IXGBE_FCOE */
- break;
- default:
- break;
- }
-
- /* n-tuple support exists, always init our spinlock */
- spin_lock_init(&adapter->fdir_perfect_lock);
-
-#ifdef CONFIG_IXGBE_DCB
- /* Configure DCB traffic classes */
- for (j = 0; j < MAX_TRAFFIC_CLASS; j++) {
- tc = &adapter->dcb_cfg.tc_config[j];
- tc->path[DCB_TX_CONFIG].bwg_id = 0;
- tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1);
- tc->path[DCB_RX_CONFIG].bwg_id = 0;
- tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1);
- tc->dcb_pfc = pfc_disabled;
- }
- adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100;
- adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100;
- adapter->dcb_cfg.pfc_mode_enable = false;
- adapter->dcb_set_bitmap = 0x00;
- adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE;
- ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg,
- MAX_TRAFFIC_CLASS);
-
-#endif
-
- /* default flow control settings */
- hw->fc.requested_mode = ixgbe_fc_full;
- hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */
-#ifdef CONFIG_DCB
- adapter->last_lfc_mode = hw->fc.current_mode;
-#endif
- hw->fc.high_water = FC_HIGH_WATER(max_frame);
- hw->fc.low_water = FC_LOW_WATER(max_frame);
- hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE;
- hw->fc.send_xon = true;
- hw->fc.disable_fc_autoneg = false;
-
- /* enable itr by default in dynamic mode */
- adapter->rx_itr_setting = 1;
- adapter->rx_eitr_param = 20000;
- adapter->tx_itr_setting = 1;
- adapter->tx_eitr_param = 10000;
-
- /* set defaults for eitr in MegaBytes */
- adapter->eitr_low = 10;
- adapter->eitr_high = 20;
-
- /* set default ring sizes */
- adapter->tx_ring_count = IXGBE_DEFAULT_TXD;
- adapter->rx_ring_count = IXGBE_DEFAULT_RXD;
-
- /* set default work limits */
- adapter->tx_work_limit = adapter->tx_ring_count;
-
- /* initialize eeprom parameters */
- if (ixgbe_init_eeprom_params_generic(hw)) {
- e_dev_err("EEPROM initialization failed\n");
- return -EIO;
- }
-
- /* enable rx csum by default */
- adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
-
- /* get assigned NUMA node */
- adapter->node = dev_to_node(&pdev->dev);
-
- set_bit(__IXGBE_DOWN, &adapter->state);
-
- return 0;
-}
-
-/**
- * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors)
- * @tx_ring: tx descriptor ring (for a specific queue) to setup
- *
- * Return 0 on success, negative on failure
- **/
-int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring)
-{
- struct device *dev = tx_ring->dev;
- int size;
-
- size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count;
- tx_ring->tx_buffer_info = vzalloc_node(size, tx_ring->numa_node);
- if (!tx_ring->tx_buffer_info)
- tx_ring->tx_buffer_info = vzalloc(size);
- if (!tx_ring->tx_buffer_info)
- goto err;
-
- /* round up to nearest 4K */
- tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
-
- tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
- &tx_ring->dma, GFP_KERNEL);
- if (!tx_ring->desc)
- goto err;
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
- return 0;
-
-err:
- vfree(tx_ring->tx_buffer_info);
- tx_ring->tx_buffer_info = NULL;
- dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * ixgbe_setup_all_tx_resources - allocate all queues Tx resources
- * @adapter: board private structure
- *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not). It is the
- * callers duty to clean those orphaned rings.
- *
- * Return 0 on success, negative on failure
- **/
-static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- err = ixgbe_setup_tx_resources(adapter->tx_ring[i]);
- if (!err)
- continue;
- e_err(probe, "Allocation for Tx Queue %u failed\n", i);
- break;
- }
-
- return err;
-}
-
-/**
- * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors)
- * @rx_ring: rx descriptor ring (for a specific queue) to setup
- *
- * Returns 0 on success, negative on failure
- **/
-int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring)
-{
- struct device *dev = rx_ring->dev;
- int size;
-
- size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count;
- rx_ring->rx_buffer_info = vzalloc_node(size, rx_ring->numa_node);
- if (!rx_ring->rx_buffer_info)
- rx_ring->rx_buffer_info = vzalloc(size);
- if (!rx_ring->rx_buffer_info)
- goto err;
-
- /* Round up to nearest 4K */
- rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
- rx_ring->size = ALIGN(rx_ring->size, 4096);
-
- rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
- &rx_ring->dma, GFP_KERNEL);
-
- if (!rx_ring->desc)
- goto err;
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- return 0;
-err:
- vfree(rx_ring->rx_buffer_info);
- rx_ring->rx_buffer_info = NULL;
- dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * ixgbe_setup_all_rx_resources - allocate all queues Rx resources
- * @adapter: board private structure
- *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not). It is the
- * callers duty to clean those orphaned rings.
- *
- * Return 0 on success, negative on failure
- **/
-static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- err = ixgbe_setup_rx_resources(adapter->rx_ring[i]);
- if (!err)
- continue;
- e_err(probe, "Allocation for Rx Queue %u failed\n", i);
- break;
- }
-
- return err;
-}
-
-/**
- * ixgbe_free_tx_resources - Free Tx Resources per Queue
- * @tx_ring: Tx descriptor ring for a specific queue
- *
- * Free all transmit software resources
- **/
-void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring)
-{
- ixgbe_clean_tx_ring(tx_ring);
-
- vfree(tx_ring->tx_buffer_info);
- tx_ring->tx_buffer_info = NULL;
-
- /* if not set, then don't free */
- if (!tx_ring->desc)
- return;
-
- dma_free_coherent(tx_ring->dev, tx_ring->size,
- tx_ring->desc, tx_ring->dma);
-
- tx_ring->desc = NULL;
-}
-
-/**
- * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- if (adapter->tx_ring[i]->desc)
- ixgbe_free_tx_resources(adapter->tx_ring[i]);
-}
-
-/**
- * ixgbe_free_rx_resources - Free Rx Resources
- * @rx_ring: ring to clean the resources from
- *
- * Free all receive software resources
- **/
-void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring)
-{
- ixgbe_clean_rx_ring(rx_ring);
-
- vfree(rx_ring->rx_buffer_info);
- rx_ring->rx_buffer_info = NULL;
-
- /* if not set, then don't free */
- if (!rx_ring->desc)
- return;
-
- dma_free_coherent(rx_ring->dev, rx_ring->size,
- rx_ring->desc, rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- if (adapter->rx_ring[i]->desc)
- ixgbe_free_rx_resources(adapter->rx_ring[i]);
-}
-
-/**
- * ixgbe_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
-
- /* MTU < 68 is an error and causes problems on some kernels */
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED &&
- hw->mac.type != ixgbe_mac_X540) {
- if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE))
- return -EINVAL;
- } else {
- if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE))
- return -EINVAL;
- }
-
- e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu);
- /* must set new MTU before calling down or up */
- netdev->mtu = new_mtu;
-
- hw->fc.high_water = FC_HIGH_WATER(max_frame);
- hw->fc.low_water = FC_LOW_WATER(max_frame);
-
- if (netif_running(netdev))
- ixgbe_reinit_locked(adapter);
-
- return 0;
-}
-
-/**
- * ixgbe_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-static int ixgbe_open(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int err;
-
- /* disallow open during test */
- if (test_bit(__IXGBE_TESTING, &adapter->state))
- return -EBUSY;
-
- netif_carrier_off(netdev);
-
- /* allocate transmit descriptors */
- err = ixgbe_setup_all_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = ixgbe_setup_all_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- ixgbe_configure(adapter);
-
- err = ixgbe_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- err = ixgbe_up_complete(adapter);
- if (err)
- goto err_up;
-
- netif_tx_start_all_queues(netdev);
-
- return 0;
-
-err_up:
- ixgbe_release_hw_control(adapter);
- ixgbe_free_irq(adapter);
-err_req_irq:
-err_setup_rx:
- ixgbe_free_all_rx_resources(adapter);
-err_setup_tx:
- ixgbe_free_all_tx_resources(adapter);
- ixgbe_reset(adapter);
-
- return err;
-}
-
-/**
- * ixgbe_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-static int ixgbe_close(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- ixgbe_down(adapter);
- ixgbe_free_irq(adapter);
-
- ixgbe_fdir_filter_exit(adapter);
-
- ixgbe_free_all_tx_resources(adapter);
- ixgbe_free_all_rx_resources(adapter);
-
- ixgbe_release_hw_control(adapter);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ixgbe_resume(struct pci_dev *pdev)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
- u32 err;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- /*
- * pci_restore_state clears dev->state_saved so call
- * pci_save_state to restore it.
- */
- pci_save_state(pdev);
-
- err = pci_enable_device_mem(pdev);
- if (err) {
- e_dev_err("Cannot enable PCI device from suspend\n");
- return err;
- }
- pci_set_master(pdev);
-
- pci_wake_from_d3(pdev, false);
-
- err = ixgbe_init_interrupt_scheme(adapter);
- if (err) {
- e_dev_err("Cannot initialize interrupts for device\n");
- return err;
- }
-
- ixgbe_reset(adapter);
-
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
-
- if (netif_running(netdev)) {
- err = ixgbe_open(netdev);
- if (err)
- return err;
- }
-
- netif_device_attach(netdev);
-
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 ctrl, fctrl;
- u32 wufc = adapter->wol;
-#ifdef CONFIG_PM
- int retval = 0;
-#endif
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev)) {
- ixgbe_down(adapter);
- ixgbe_free_irq(adapter);
- ixgbe_free_all_tx_resources(adapter);
- ixgbe_free_all_rx_resources(adapter);
- }
-
- ixgbe_clear_interrupt_scheme(adapter);
-#ifdef CONFIG_DCB
- kfree(adapter->ixgbe_ieee_pfc);
- kfree(adapter->ixgbe_ieee_ets);
-#endif
-
-#ifdef CONFIG_PM
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
-#endif
- if (wufc) {
- ixgbe_set_rx_mode(netdev);
-
- /* turn on all-multi mode if wake on multicast is enabled */
- if (wufc & IXGBE_WUFC_MC) {
- fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- fctrl |= IXGBE_FCTRL_MPE;
- IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
- }
-
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- ctrl |= IXGBE_CTRL_GIO_DIS;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
-
- IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc);
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_WUC, 0);
- IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
- }
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- pci_wake_from_d3(pdev, false);
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- pci_wake_from_d3(pdev, !!wufc);
- break;
- default:
- break;
- }
-
- *enable_wake = !!wufc;
-
- ixgbe_release_hw_control(adapter);
-
- pci_disable_device(pdev);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state)
-{
- int retval;
- bool wake;
-
- retval = __ixgbe_shutdown(pdev, &wake);
- if (retval)
- return retval;
-
- if (wake) {
- pci_prepare_to_sleep(pdev);
- } else {
- pci_wake_from_d3(pdev, false);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-
- return 0;
-}
-#endif /* CONFIG_PM */
-
-static void ixgbe_shutdown(struct pci_dev *pdev)
-{
- bool wake;
-
- __ixgbe_shutdown(pdev, &wake);
-
- if (system_state == SYSTEM_POWER_OFF) {
- pci_wake_from_d3(pdev, wake);
- pci_set_power_state(pdev, PCI_D3hot);
- }
-}
-
-/**
- * ixgbe_update_stats - Update the board statistics counters.
- * @adapter: board private structure
- **/
-void ixgbe_update_stats(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbe_hw_stats *hwstats = &adapter->stats;
- u64 total_mpc = 0;
- u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
- u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0;
- u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0;
- u64 bytes = 0, packets = 0;
-
- if (test_bit(__IXGBE_DOWN, &adapter->state) ||
- test_bit(__IXGBE_RESETTING, &adapter->state))
- return;
-
- if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) {
- u64 rsc_count = 0;
- u64 rsc_flush = 0;
- for (i = 0; i < 16; i++)
- adapter->hw_rx_no_dma_resources +=
- IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count;
- rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush;
- }
- adapter->rsc_total_count = rsc_count;
- adapter->rsc_total_flush = rsc_flush;
- }
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct ixgbe_ring *rx_ring = adapter->rx_ring[i];
- non_eop_descs += rx_ring->rx_stats.non_eop_descs;
- alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed;
- alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed;
- bytes += rx_ring->stats.bytes;
- packets += rx_ring->stats.packets;
- }
- adapter->non_eop_descs = non_eop_descs;
- adapter->alloc_rx_page_failed = alloc_rx_page_failed;
- adapter->alloc_rx_buff_failed = alloc_rx_buff_failed;
- netdev->stats.rx_bytes = bytes;
- netdev->stats.rx_packets = packets;
-
- bytes = 0;
- packets = 0;
- /* gather some stats to the adapter struct that are per queue */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
- restart_queue += tx_ring->tx_stats.restart_queue;
- tx_busy += tx_ring->tx_stats.tx_busy;
- bytes += tx_ring->stats.bytes;
- packets += tx_ring->stats.packets;
- }
- adapter->restart_queue = restart_queue;
- adapter->tx_busy = tx_busy;
- netdev->stats.tx_bytes = bytes;
- netdev->stats.tx_packets = packets;
-
- hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
- for (i = 0; i < 8; i++) {
- /* for packet buffers not used, the register should read 0 */
- mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i));
- missed_rx += mpc;
- hwstats->mpc[i] += mpc;
- total_mpc += hwstats->mpc[i];
- if (hw->mac.type == ixgbe_mac_82598EB)
- hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i));
- hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
- hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i));
- hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
- hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i));
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- hwstats->pxonrxc[i] +=
- IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
- break;
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- hwstats->pxonrxc[i] +=
- IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i));
- break;
- default:
- break;
- }
- hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
- hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
- }
- hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
- /* work around hardware counting issue */
- hwstats->gprc -= missed_rx;
-
- ixgbe_update_xoff_received(adapter);
-
- /* 82598 hardware only has a 32 bit counter in the high register */
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB:
- hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
- hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
- hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
- hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
- break;
- case ixgbe_mac_X540:
- /* OS2BMC stats are X540 only*/
- hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC);
- hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC);
- hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC);
- hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC);
- case ixgbe_mac_82599EB:
- hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
- IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */
- hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
- IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */
- hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL);
- IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */
- hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
- hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
- hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
-#ifdef IXGBE_FCOE
- hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
- hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
- hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
- hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
- hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
- hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
-#endif /* IXGBE_FCOE */
- break;
- default:
- break;
- }
- bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
- hwstats->bprc += bprc;
- hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
- if (hw->mac.type == ixgbe_mac_82598EB)
- hwstats->mprc -= bprc;
- hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC);
- hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
- hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
- hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
- hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
- hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
- hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
- hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
- lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
- hwstats->lxontxc += lxon;
- lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
- hwstats->lxofftxc += lxoff;
- hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
- hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
- hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
- /*
- * 82598 errata - tx of flow control packets is included in tx counters
- */
- xon_off_tot = lxon + lxoff;
- hwstats->gptc -= xon_off_tot;
- hwstats->mptc -= xon_off_tot;
- hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN));
- hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
- hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
- hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
- hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
- hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
- hwstats->ptc64 -= xon_off_tot;
- hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
- hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
- hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
- hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
- hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
- hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
-
- /* Fill out the OS statistics structure */
- netdev->stats.multicast = hwstats->mprc;
-
- /* Rx Errors */
- netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec;
- netdev->stats.rx_dropped = 0;
- netdev->stats.rx_length_errors = hwstats->rlec;
- netdev->stats.rx_crc_errors = hwstats->crcerrs;
- netdev->stats.rx_missed_errors = total_mpc;
-}
-
-/**
- * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table
- * @adapter - pointer to the device adapter structure
- **/
-static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int i;
-
- if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT))
- return;
-
- adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT;
-
- /* if interface is down do nothing */
- if (test_bit(__IXGBE_DOWN, &adapter->state))
- return;
-
- /* do nothing if we are not using signature filters */
- if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE))
- return;
-
- adapter->fdir_overflow++;
-
- if (ixgbe_reinit_fdir_tables_82599(hw) == 0) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- set_bit(__IXGBE_TX_FDIR_INIT_DONE,
- &(adapter->tx_ring[i]->state));
- /* re-enable flow director interrupts */
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR);
- } else {
- e_err(probe, "failed to finish FDIR re-initialization, "
- "ignored adding FDIR ATR filters\n");
- }
-}
-
-/**
- * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts
- * @adapter - pointer to the device adapter structure
- *
- * This function serves two purposes. First it strobes the interrupt lines
- * in order to make certain interrupts are occuring. Secondly it sets the
- * bits needed to check for TX hangs. As a result we should immediately
- * determine if a hang has occured.
- */
-static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u64 eics = 0;
- int i;
-
- /* If we're down or resetting, just bail */
- if (test_bit(__IXGBE_DOWN, &adapter->state) ||
- test_bit(__IXGBE_RESETTING, &adapter->state))
- return;
-
- /* Force detection of hung controller */
- if (netif_carrier_ok(adapter->netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- set_check_for_tx_hang(adapter->tx_ring[i]);
- }
-
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
- /*
- * for legacy and MSI interrupts don't set any bits
- * that are enabled for EIAM, because this operation
- * would set *both* EIMS and EICS for any bit in EIAM
- */
- IXGBE_WRITE_REG(hw, IXGBE_EICS,
- (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER));
- } else {
- /* get one bit for every active tx/rx interrupt vector */
- for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
- struct ixgbe_q_vector *qv = adapter->q_vector[i];
- if (qv->rx.count || qv->tx.count)
- eics |= ((u64)1 << i);
- }
- }
-
- /* Cause software interrupt to ensure rings are cleaned */
- ixgbe_irq_rearm_queues(adapter, eics);
-
-}
-
-/**
- * ixgbe_watchdog_update_link - update the link status
- * @adapter - pointer to the device adapter structure
- * @link_speed - pointer to a u32 to store the link_speed
- **/
-static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed = adapter->link_speed;
- bool link_up = adapter->link_up;
- int i;
-
- if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE))
- return;
-
- if (hw->mac.ops.check_link) {
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
- } else {
- /* always assume link is up, if no check link function */
- link_speed = IXGBE_LINK_SPEED_10GB_FULL;
- link_up = true;
- }
- if (link_up) {
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++)
- hw->mac.ops.fc_enable(hw, i);
- } else {
- hw->mac.ops.fc_enable(hw, 0);
- }
- }
-
- if (link_up ||
- time_after(jiffies, (adapter->link_check_timeout +
- IXGBE_TRY_LINK_TIMEOUT))) {
- adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE;
- IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC);
- IXGBE_WRITE_FLUSH(hw);
- }
-
- adapter->link_up = link_up;
- adapter->link_speed = link_speed;
-}
-
-/**
- * ixgbe_watchdog_link_is_up - update netif_carrier status and
- * print link up message
- * @adapter - pointer to the device adapter structure
- **/
-static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed = adapter->link_speed;
- bool flow_rx, flow_tx;
-
- /* only continue if link was previously down */
- if (netif_carrier_ok(netdev))
- return;
-
- adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82598EB: {
- u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS);
- flow_rx = !!(frctl & IXGBE_FCTRL_RFCE);
- flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X);
- }
- break;
- case ixgbe_mac_X540:
- case ixgbe_mac_82599EB: {
- u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN);
- u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG);
- flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE);
- flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X);
- }
- break;
- default:
- flow_tx = false;
- flow_rx = false;
- break;
- }
- e_info(drv, "NIC Link is Up %s, Flow Control: %s\n",
- (link_speed == IXGBE_LINK_SPEED_10GB_FULL ?
- "10 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_1GB_FULL ?
- "1 Gbps" :
- (link_speed == IXGBE_LINK_SPEED_100_FULL ?
- "100 Mbps" :
- "unknown speed"))),
- ((flow_rx && flow_tx) ? "RX/TX" :
- (flow_rx ? "RX" :
- (flow_tx ? "TX" : "None"))));
-
- netif_carrier_on(netdev);
- ixgbe_check_vf_rate_limit(adapter);
-}
-
-/**
- * ixgbe_watchdog_link_is_down - update netif_carrier status and
- * print link down message
- * @adapter - pointer to the adapter structure
- **/
-static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
-
- adapter->link_up = false;
- adapter->link_speed = 0;
-
- /* only continue if link was up previously */
- if (!netif_carrier_ok(netdev))
- return;
-
- /* poll for SFP+ cable when link is down */
- if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB)
- adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP;
-
- e_info(drv, "NIC Link is Down\n");
- netif_carrier_off(netdev);
-}
-
-/**
- * ixgbe_watchdog_flush_tx - flush queues on link down
- * @adapter - pointer to the device adapter structure
- **/
-static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter)
-{
- int i;
- int some_tx_pending = 0;
-
- if (!netif_carrier_ok(adapter->netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *tx_ring = adapter->tx_ring[i];
- if (tx_ring->next_to_use != tx_ring->next_to_clean) {
- some_tx_pending = 1;
- break;
- }
- }
-
- if (some_tx_pending) {
- /* We've lost link, so the controller stops DMA,
- * but we've got queued Tx work that's never going
- * to get done, so reset controller to flush Tx.
- * (Do the reset outside of interrupt context).
- */
- adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED;
- }
- }
-}
-
-static void ixgbe_spoof_check(struct ixgbe_adapter *adapter)
-{
- u32 ssvpc;
-
- /* Do not perform spoof check for 82598 */
- if (adapter->hw.mac.type == ixgbe_mac_82598EB)
- return;
-
- ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC);
-
- /*
- * ssvpc register is cleared on read, if zero then no
- * spoofed packets in the last interval.
- */
- if (!ssvpc)
- return;
-
- e_warn(drv, "%d Spoofed packets detected\n", ssvpc);
-}
-
-/**
- * ixgbe_watchdog_subtask - check and bring link up
- * @adapter - pointer to the device adapter structure
- **/
-static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter)
-{
- /* if interface is down do nothing */
- if (test_bit(__IXGBE_DOWN, &adapter->state))
- return;
-
- ixgbe_watchdog_update_link(adapter);
-
- if (adapter->link_up)
- ixgbe_watchdog_link_is_up(adapter);
- else
- ixgbe_watchdog_link_is_down(adapter);
-
- ixgbe_spoof_check(adapter);
- ixgbe_update_stats(adapter);
-
- ixgbe_watchdog_flush_tx(adapter);
-}
-
-/**
- * ixgbe_sfp_detection_subtask - poll for SFP+ cable
- * @adapter - the ixgbe adapter structure
- **/
-static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- s32 err;
-
- /* not searching for SFP so there is nothing to do here */
- if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) &&
- !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
- return;
-
- /* someone else is in init, wait until next service event */
- if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
- return;
-
- err = hw->phy.ops.identify_sfp(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto sfp_out;
-
- if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
- /* If no cable is present, then we need to reset
- * the next time we find a good cable. */
- adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
- }
-
- /* exit on error */
- if (err)
- goto sfp_out;
-
- /* exit if reset not needed */
- if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET))
- goto sfp_out;
-
- adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET;
-
- /*
- * A module may be identified correctly, but the EEPROM may not have
- * support for that module. setup_sfp() will fail in that case, so
- * we should not allow that module to load.
- */
- if (hw->mac.type == ixgbe_mac_82598EB)
- err = hw->phy.ops.reset(hw);
- else
- err = hw->mac.ops.setup_sfp(hw);
-
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
- goto sfp_out;
-
- adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
- e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type);
-
-sfp_out:
- clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
-
- if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
- (adapter->netdev->reg_state == NETREG_REGISTERED)) {
- e_dev_err("failed to initialize because an unsupported "
- "SFP+ module type was detected.\n");
- e_dev_err("Reload the driver after installing a "
- "supported module.\n");
- unregister_netdev(adapter->netdev);
- }
-}
-
-/**
- * ixgbe_sfp_link_config_subtask - set up link SFP after module install
- * @adapter - the ixgbe adapter structure
- **/
-static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 autoneg;
- bool negotiation;
-
- if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG))
- return;
-
- /* someone else is in init, wait until next service event */
- if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
- return;
-
- adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG;
-
- autoneg = hw->phy.autoneg_advertised;
- if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
- hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation);
- hw->mac.autotry_restart = false;
- if (hw->mac.ops.setup_link)
- hw->mac.ops.setup_link(hw, autoneg, negotiation, true);
-
- adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
- adapter->link_check_timeout = jiffies;
- clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
-}
-
-/**
- * ixgbe_service_timer - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void ixgbe_service_timer(unsigned long data)
-{
- struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data;
- unsigned long next_event_offset;
-
- /* poll faster when waiting for link */
- if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)
- next_event_offset = HZ / 10;
- else
- next_event_offset = HZ * 2;
-
- /* Reset the timer */
- mod_timer(&adapter->service_timer, next_event_offset + jiffies);
-
- ixgbe_service_event_schedule(adapter);
-}
-
-static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
-{
- if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED))
- return;
-
- adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED;
-
- /* If we're already down or resetting, just bail */
- if (test_bit(__IXGBE_DOWN, &adapter->state) ||
- test_bit(__IXGBE_RESETTING, &adapter->state))
- return;
-
- ixgbe_dump(adapter);
- netdev_err(adapter->netdev, "Reset adapter\n");
- adapter->tx_timeout_count++;
-
- ixgbe_reinit_locked(adapter);
-}
-
-/**
- * ixgbe_service_task - manages and runs subtasks
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbe_service_task(struct work_struct *work)
-{
- struct ixgbe_adapter *adapter = container_of(work,
- struct ixgbe_adapter,
- service_task);
-
- ixgbe_reset_subtask(adapter);
- ixgbe_sfp_detection_subtask(adapter);
- ixgbe_sfp_link_config_subtask(adapter);
- ixgbe_check_overtemp_subtask(adapter);
- ixgbe_watchdog_subtask(adapter);
- ixgbe_fdir_reinit_subtask(adapter);
- ixgbe_check_hang_subtask(adapter);
-
- ixgbe_service_event_complete(adapter);
-}
-
-void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens,
- u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx)
-{
- struct ixgbe_adv_tx_context_desc *context_desc;
- u16 i = tx_ring->next_to_use;
-
- context_desc = IXGBE_TX_CTXTDESC_ADV(tx_ring, i);
-
- i++;
- tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
-
- /* set bits to identify this as an advanced context descriptor */
- type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
-
- context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
- context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof);
- context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd);
- context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
-}
-
-static int ixgbe_tso(struct ixgbe_ring *tx_ring, struct sk_buff *skb,
- u32 tx_flags, __be16 protocol, u8 *hdr_len)
-{
- int err;
- u32 vlan_macip_lens, type_tucmd;
- u32 mss_l4len_idx, l4len;
-
- if (!skb_is_gso(skb))
- return 0;
-
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err)
- return err;
- }
-
- /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
- type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP;
-
- if (protocol == __constant_htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
- type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
- } else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check =
- ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- }
-
- l4len = tcp_hdrlen(skb);
- *hdr_len = skb_transport_offset(skb) + l4len;
-
- /* mss_l4len_id: use 1 as index for TSO */
- mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT;
- mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT;
- mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT;
-
- /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */
- vlan_macip_lens = skb_network_header_len(skb);
- vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
- vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
-
- ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd,
- mss_l4len_idx);
-
- return 1;
-}
-
-static bool ixgbe_tx_csum(struct ixgbe_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags,
- __be16 protocol)
-{
- u32 vlan_macip_lens = 0;
- u32 mss_l4len_idx = 0;
- u32 type_tucmd = 0;
-
- if (skb->ip_summed != CHECKSUM_PARTIAL) {
- if (!(tx_flags & IXGBE_TX_FLAGS_VLAN))
- return false;
- } else {
- u8 l4_hdr = 0;
- switch (protocol) {
- case __constant_htons(ETH_P_IP):
- vlan_macip_lens |= skb_network_header_len(skb);
- type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4;
- l4_hdr = ip_hdr(skb)->protocol;
- break;
- case __constant_htons(ETH_P_IPV6):
- vlan_macip_lens |= skb_network_header_len(skb);
- l4_hdr = ipv6_hdr(skb)->nexthdr;
- break;
- default:
- if (unlikely(net_ratelimit())) {
- dev_warn(tx_ring->dev,
- "partial checksum but proto=%x!\n",
- skb->protocol);
- }
- break;
- }
-
- switch (l4_hdr) {
- case IPPROTO_TCP:
- type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
- mss_l4len_idx = tcp_hdrlen(skb) <<
- IXGBE_ADVTXD_L4LEN_SHIFT;
- break;
- case IPPROTO_SCTP:
- type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP;
- mss_l4len_idx = sizeof(struct sctphdr) <<
- IXGBE_ADVTXD_L4LEN_SHIFT;
- break;
- case IPPROTO_UDP:
- mss_l4len_idx = sizeof(struct udphdr) <<
- IXGBE_ADVTXD_L4LEN_SHIFT;
- break;
- default:
- if (unlikely(net_ratelimit())) {
- dev_warn(tx_ring->dev,
- "partial checksum but l4 proto=%x!\n",
- skb->protocol);
- }
- break;
- }
- }
-
- vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT;
- vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK;
-
- ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0,
- type_tucmd, mss_l4len_idx);
-
- return (skb->ip_summed == CHECKSUM_PARTIAL);
-}
-
-static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
- struct ixgbe_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags,
- unsigned int first, const u8 hdr_len)
-{
- struct device *dev = tx_ring->dev;
- struct ixgbe_tx_buffer *tx_buffer_info;
- unsigned int len;
- unsigned int total = skb->len;
- unsigned int offset = 0, size, count = 0;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
- unsigned int f;
- unsigned int bytecount = skb->len;
- u16 gso_segs = 1;
- u16 i;
-
- i = tx_ring->next_to_use;
-
- if (tx_flags & IXGBE_TX_FLAGS_FCOE)
- /* excluding fcoe_crc_eof for FCoE */
- total -= sizeof(struct fcoe_crc_eof);
-
- len = min(skb_headlen(skb), total);
- while (len) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
-
- tx_buffer_info->length = size;
- tx_buffer_info->mapped_as_page = false;
- tx_buffer_info->dma = dma_map_single(dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(dev, tx_buffer_info->dma))
- goto dma_error;
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- len -= size;
- total -= size;
- offset += size;
- count++;
-
- if (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = min((unsigned int)frag->size, total);
- offset = frag->page_offset;
-
- while (len) {
- i++;
- if (i == tx_ring->count)
- i = 0;
-
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
-
- tx_buffer_info->length = size;
- tx_buffer_info->dma = dma_map_page(dev,
- frag->page,
- offset, size,
- DMA_TO_DEVICE);
- tx_buffer_info->mapped_as_page = true;
- if (dma_mapping_error(dev, tx_buffer_info->dma))
- goto dma_error;
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- len -= size;
- total -= size;
- offset += size;
- count++;
- }
- if (total == 0)
- break;
- }
-
- if (tx_flags & IXGBE_TX_FLAGS_TSO)
- gso_segs = skb_shinfo(skb)->gso_segs;
-#ifdef IXGBE_FCOE
- /* adjust for FCoE Sequence Offload */
- else if (tx_flags & IXGBE_TX_FLAGS_FSO)
- gso_segs = DIV_ROUND_UP(skb->len - hdr_len,
- skb_shinfo(skb)->gso_size);
-#endif /* IXGBE_FCOE */
- bytecount += (gso_segs - 1) * hdr_len;
-
- /* multiply data chunks by size of headers */
- tx_ring->tx_buffer_info[i].bytecount = bytecount;
- tx_ring->tx_buffer_info[i].gso_segs = gso_segs;
- tx_ring->tx_buffer_info[i].skb = skb;
- tx_ring->tx_buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- e_dev_err("TX DMA map failed\n");
-
- /* clear timestamp and dma mappings for failed tx_buffer_info map */
- tx_buffer_info->dma = 0;
- tx_buffer_info->time_stamp = 0;
- tx_buffer_info->next_to_watch = 0;
- if (count)
- count--;
-
- /* clear timestamp and dma mappings for remaining portion of packet */
- while (count--) {
- if (i == 0)
- i += tx_ring->count;
- i--;
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info);
- }
-
- return 0;
-}
-
-static void ixgbe_tx_queue(struct ixgbe_ring *tx_ring,
- int tx_flags, int count, u32 paylen, u8 hdr_len)
-{
- union ixgbe_adv_tx_desc *tx_desc = NULL;
- struct ixgbe_tx_buffer *tx_buffer_info;
- u32 olinfo_status = 0, cmd_type_len = 0;
- unsigned int i;
- u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
-
- cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
-
- cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
-
- if (tx_flags & IXGBE_TX_FLAGS_VLAN)
- cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
-
- if (tx_flags & IXGBE_TX_FLAGS_TSO) {
- cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
-
- olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- /* use index 1 context for tso */
- olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
- if (tx_flags & IXGBE_TX_FLAGS_IPV4)
- olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- } else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
- olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
- olinfo_status |= IXGBE_ADVTXD_CC;
- olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
- if (tx_flags & IXGBE_TX_FLAGS_FSO)
- cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
- }
-
- olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
-
- i = tx_ring->next_to_use;
- while (count--) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i);
- tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
- tx_desc->read.cmd_type_len =
- cpu_to_le32(cmd_type_len | tx_buffer_info->length);
- tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
-
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, tx_ring->tail);
-}
-
-static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb,
- u32 tx_flags, __be16 protocol)
-{
- struct ixgbe_q_vector *q_vector = ring->q_vector;
- union ixgbe_atr_hash_dword input = { .dword = 0 };
- union ixgbe_atr_hash_dword common = { .dword = 0 };
- union {
- unsigned char *network;
- struct iphdr *ipv4;
- struct ipv6hdr *ipv6;
- } hdr;
- struct tcphdr *th;
- __be16 vlan_id;
-
- /* if ring doesn't have a interrupt vector, cannot perform ATR */
- if (!q_vector)
- return;
-
- /* do nothing if sampling is disabled */
- if (!ring->atr_sample_rate)
- return;
-
- ring->atr_count++;
-
- /* snag network header to get L4 type and address */
- hdr.network = skb_network_header(skb);
-
- /* Currently only IPv4/IPv6 with TCP is supported */
- if ((protocol != __constant_htons(ETH_P_IPV6) ||
- hdr.ipv6->nexthdr != IPPROTO_TCP) &&
- (protocol != __constant_htons(ETH_P_IP) ||
- hdr.ipv4->protocol != IPPROTO_TCP))
- return;
-
- th = tcp_hdr(skb);
-
- /* skip this packet since the socket is closing */
- if (th->fin)
- return;
-
- /* sample on all syn packets or once every atr sample count */
- if (!th->syn && (ring->atr_count < ring->atr_sample_rate))
- return;
-
- /* reset sample count */
- ring->atr_count = 0;
-
- vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT);
-
- /*
- * src and dst are inverted, think how the receiver sees them
- *
- * The input is broken into two sections, a non-compressed section
- * containing vm_pool, vlan_id, and flow_type. The rest of the data
- * is XORed together and stored in the compressed dword.
- */
- input.formatted.vlan_id = vlan_id;
-
- /*
- * since src port and flex bytes occupy the same word XOR them together
- * and write the value to source port portion of compressed dword
- */
- if (vlan_id)
- common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q);
- else
- common.port.src ^= th->dest ^ protocol;
- common.port.dst ^= th->source;
-
- if (protocol == __constant_htons(ETH_P_IP)) {
- input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4;
- common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr;
- } else {
- input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6;
- common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^
- hdr.ipv6->saddr.s6_addr32[1] ^
- hdr.ipv6->saddr.s6_addr32[2] ^
- hdr.ipv6->saddr.s6_addr32[3] ^
- hdr.ipv6->daddr.s6_addr32[0] ^
- hdr.ipv6->daddr.s6_addr32[1] ^
- hdr.ipv6->daddr.s6_addr32[2] ^
- hdr.ipv6->daddr.s6_addr32[3];
- }
-
- /* This assumes the Rx queue and Tx queue are bound to the same CPU */
- ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw,
- input, common, ring->queue_index);
-}
-
-static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
-{
- netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (likely(ixgbe_desc_unused(tx_ring) < size))
- return -EBUSY;
-
- /* A reprieve! - use start_queue because it doesn't call schedule */
- netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
- ++tx_ring->tx_stats.restart_queue;
- return 0;
-}
-
-static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size)
-{
- if (likely(ixgbe_desc_unused(tx_ring) >= size))
- return 0;
- return __ixgbe_maybe_stop_tx(tx_ring, size);
-}
-
-static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) :
- smp_processor_id();
-#ifdef IXGBE_FCOE
- __be16 protocol = vlan_get_protocol(skb);
-
- if (((protocol == htons(ETH_P_FCOE)) ||
- (protocol == htons(ETH_P_FIP))) &&
- (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) {
- txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1);
- txq += adapter->ring_feature[RING_F_FCOE].mask;
- return txq;
- }
-#endif
-
- if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) {
- while (unlikely(txq >= dev->real_num_tx_queues))
- txq -= dev->real_num_tx_queues;
- return txq;
- }
-
- return skb_tx_hash(dev, skb);
-}
-
-netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb,
- struct ixgbe_adapter *adapter,
- struct ixgbe_ring *tx_ring)
-{
- int tso;
- u32 tx_flags = 0;
-#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
- unsigned short f;
-#endif
- u16 first;
- u16 count = TXD_USE_COUNT(skb_headlen(skb));
- __be16 protocol;
- u8 hdr_len = 0;
-
- /*
- * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD,
- * + 1 desc for skb_head_len/IXGBE_MAX_DATA_PER_TXD,
- * + 2 desc gap to keep tail from touching head,
- * + 1 desc for context descriptor,
- * otherwise try next time
- */
-#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD
- for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
-#else
- count += skb_shinfo(skb)->nr_frags;
-#endif
- if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) {
- tx_ring->tx_stats.tx_busy++;
- return NETDEV_TX_BUSY;
- }
-
- protocol = vlan_get_protocol(skb);
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= vlan_tx_tag_get(skb);
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
- tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK;
- tx_flags |= tx_ring->dcb_tc << 13;
- }
- tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
- tx_flags |= IXGBE_TX_FLAGS_VLAN;
- } else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED &&
- skb->priority != TC_PRIO_CONTROL) {
- tx_flags |= tx_ring->dcb_tc << 13;
- tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
- tx_flags |= IXGBE_TX_FLAGS_VLAN;
- }
-
-#ifdef IXGBE_FCOE
- /* for FCoE with DCB, we force the priority to what
- * was specified by the switch */
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED &&
- (protocol == htons(ETH_P_FCOE)))
- tx_flags |= IXGBE_TX_FLAGS_FCOE;
-
-#endif
- /* record the location of the first descriptor for this packet */
- first = tx_ring->next_to_use;
-
- if (tx_flags & IXGBE_TX_FLAGS_FCOE) {
-#ifdef IXGBE_FCOE
- /* setup tx offload for FCoE */
- tso = ixgbe_fso(tx_ring, skb, tx_flags, &hdr_len);
- if (tso < 0)
- goto out_drop;
- else if (tso)
- tx_flags |= IXGBE_TX_FLAGS_FSO;
-#endif /* IXGBE_FCOE */
- } else {
- if (protocol == htons(ETH_P_IP))
- tx_flags |= IXGBE_TX_FLAGS_IPV4;
- tso = ixgbe_tso(tx_ring, skb, tx_flags, protocol, &hdr_len);
- if (tso < 0)
- goto out_drop;
- else if (tso)
- tx_flags |= IXGBE_TX_FLAGS_TSO;
- else if (ixgbe_tx_csum(tx_ring, skb, tx_flags, protocol))
- tx_flags |= IXGBE_TX_FLAGS_CSUM;
- }
-
- count = ixgbe_tx_map(adapter, tx_ring, skb, tx_flags, first, hdr_len);
- if (count) {
- /* add the ATR filter if ATR is on */
- if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state))
- ixgbe_atr(tx_ring, skb, tx_flags, protocol);
- ixgbe_tx_queue(tx_ring, tx_flags, count, skb->len, hdr_len);
- ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED);
-
- } else {
- tx_ring->tx_buffer_info[first].time_stamp = 0;
- tx_ring->next_to_use = first;
- goto out_drop;
- }
-
- return NETDEV_TX_OK;
-
-out_drop:
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
-}
-
-static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_ring *tx_ring;
-
- tx_ring = adapter->tx_ring[skb->queue_mapping];
- return ixgbe_xmit_frame_ring(skb, adapter, tx_ring);
-}
-
-/**
- * ixgbe_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-static int ixgbe_set_mac(struct net_device *netdev, void *p)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
-
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs,
- IXGBE_RAH_AV);
-
- return 0;
-}
-
-static int
-ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u16 value;
- int rc;
-
- if (prtad != hw->phy.mdio.prtad)
- return -EINVAL;
- rc = hw->phy.ops.read_reg(hw, addr, devad, &value);
- if (!rc)
- rc = value;
- return rc;
-}
-
-static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad,
- u16 addr, u16 value)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- if (prtad != hw->phy.mdio.prtad)
- return -EINVAL;
- return hw->phy.ops.write_reg(hw, addr, devad, value);
-}
-
-static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd);
-}
-
-/**
- * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding
- * netdev->dev_addrs
- * @netdev: network interface device structure
- *
- * Returns non-zero on failure
- **/
-static int ixgbe_add_sanmac_netdev(struct net_device *dev)
-{
- int err = 0;
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ixgbe_mac_info *mac = &adapter->hw.mac;
-
- if (is_valid_ether_addr(mac->san_addr)) {
- rtnl_lock();
- err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
- rtnl_unlock();
- }
- return err;
-}
-
-/**
- * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding
- * netdev->dev_addrs
- * @netdev: network interface device structure
- *
- * Returns non-zero on failure
- **/
-static int ixgbe_del_sanmac_netdev(struct net_device *dev)
-{
- int err = 0;
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ixgbe_mac_info *mac = &adapter->hw.mac;
-
- if (is_valid_ether_addr(mac->san_addr)) {
- rtnl_lock();
- err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN);
- rtnl_unlock();
- }
- return err;
-}
-
-#ifdef CONFIG_NET_POLL_CONTROLLER
-/*
- * Polling 'interrupt' - used by things like netconsole to send skbs
- * without having to re-enable interrupts. It's not called while
- * the interrupt routine is executing.
- */
-static void ixgbe_netpoll(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int i;
-
- /* if interface is down do nothing */
- if (test_bit(__IXGBE_DOWN, &adapter->state))
- return;
-
- adapter->flags |= IXGBE_FLAG_IN_NETPOLL;
- if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
- int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- for (i = 0; i < num_q_vectors; i++) {
- struct ixgbe_q_vector *q_vector = adapter->q_vector[i];
- ixgbe_msix_clean_many(0, q_vector);
- }
- } else {
- ixgbe_intr(adapter->pdev->irq, netdev);
- }
- adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL;
-}
-#endif
-
-static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev,
- struct rtnl_link_stats64 *stats)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- int i;
-
- rcu_read_lock();
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]);
- u64 bytes, packets;
- unsigned int start;
-
- if (ring) {
- do {
- start = u64_stats_fetch_begin_bh(&ring->syncp);
- packets = ring->stats.packets;
- bytes = ring->stats.bytes;
- } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
- stats->rx_packets += packets;
- stats->rx_bytes += bytes;
- }
- }
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]);
- u64 bytes, packets;
- unsigned int start;
-
- if (ring) {
- do {
- start = u64_stats_fetch_begin_bh(&ring->syncp);
- packets = ring->stats.packets;
- bytes = ring->stats.bytes;
- } while (u64_stats_fetch_retry_bh(&ring->syncp, start));
- stats->tx_packets += packets;
- stats->tx_bytes += bytes;
- }
- }
- rcu_read_unlock();
- /* following stats updated by ixgbe_watchdog_task() */
- stats->multicast = netdev->stats.multicast;
- stats->rx_errors = netdev->stats.rx_errors;
- stats->rx_length_errors = netdev->stats.rx_length_errors;
- stats->rx_crc_errors = netdev->stats.rx_crc_errors;
- stats->rx_missed_errors = netdev->stats.rx_missed_errors;
- return stats;
-}
-
-/* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid.
- * #adapter: pointer to ixgbe_adapter
- * @tc: number of traffic classes currently enabled
- *
- * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm
- * 802.1Q priority maps to a packet buffer that exists.
- */
-static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 reg, rsave;
- int i;
-
- /* 82598 have a static priority to TC mapping that can not
- * be changed so no validation is needed.
- */
- if (hw->mac.type == ixgbe_mac_82598EB)
- return;
-
- reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC);
- rsave = reg;
-
- for (i = 0; i < MAX_TRAFFIC_CLASS; i++) {
- u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT);
-
- /* If up2tc is out of bounds default to zero */
- if (up2tc > tc)
- reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT);
- }
-
- if (reg != rsave)
- IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg);
-
- return;
-}
-
-
-/* ixgbe_setup_tc - routine to configure net_device for multiple traffic
- * classes.
- *
- * @netdev: net device to configure
- * @tc: number of traffic classes to enable
- */
-int ixgbe_setup_tc(struct net_device *dev, u8 tc)
-{
- struct ixgbe_adapter *adapter = netdev_priv(dev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* If DCB is anabled do not remove traffic classes, multiple
- * traffic classes are required to implement DCB
- */
- if (!tc && (adapter->flags & IXGBE_FLAG_DCB_ENABLED))
- return 0;
-
- /* Hardware supports up to 8 traffic classes */
- if (tc > MAX_TRAFFIC_CLASS ||
- (hw->mac.type == ixgbe_mac_82598EB && tc < MAX_TRAFFIC_CLASS))
- return -EINVAL;
-
- /* Hardware has to reinitialize queues and interrupts to
- * match packet buffer alignment. Unfortunantly, the
- * hardware is not flexible enough to do this dynamically.
- */
- if (netif_running(dev))
- ixgbe_close(dev);
- ixgbe_clear_interrupt_scheme(adapter);
-
- if (tc)
- netdev_set_num_tc(dev, tc);
- else
- netdev_reset_tc(dev);
-
- ixgbe_init_interrupt_scheme(adapter);
- ixgbe_validate_rtr(adapter, tc);
- if (netif_running(dev))
- ixgbe_open(dev);
-
- return 0;
-}
-
-void ixgbe_do_reset(struct net_device *netdev)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
- if (netif_running(netdev))
- ixgbe_reinit_locked(adapter);
- else
- ixgbe_reset(adapter);
-}
-
-static u32 ixgbe_fix_features(struct net_device *netdev, u32 data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
-#ifdef CONFIG_DCB
- if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
- data &= ~NETIF_F_HW_VLAN_RX;
-#endif
-
- /* return error if RXHASH is being enabled when RSS is not supported */
- if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED))
- data &= ~NETIF_F_RXHASH;
-
- /* If Rx checksum is disabled, then RSC/LRO should also be disabled */
- if (!(data & NETIF_F_RXCSUM))
- data &= ~NETIF_F_LRO;
-
- /* Turn off LRO if not RSC capable or invalid ITR settings */
- if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) {
- data &= ~NETIF_F_LRO;
- } else if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) &&
- (adapter->rx_itr_setting != 1 &&
- adapter->rx_itr_setting > IXGBE_MAX_RSC_INT_RATE)) {
- data &= ~NETIF_F_LRO;
- e_info(probe, "rx-usecs set too low, not enabling RSC\n");
- }
-
- return data;
-}
-
-static int ixgbe_set_features(struct net_device *netdev, u32 data)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- bool need_reset = false;
-
- /* If Rx checksum is disabled, then RSC/LRO should also be disabled */
- if (!(data & NETIF_F_RXCSUM))
- adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
- else
- adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
-
- /* Make sure RSC matches LRO, reset if change */
- if (!!(data & NETIF_F_LRO) !=
- !!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) {
- adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED;
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_X540:
- case ixgbe_mac_82599EB:
- need_reset = true;
- break;
- default:
- break;
- }
- }
-
- /*
- * Check if Flow Director n-tuple support was enabled or disabled. If
- * the state changed, we need to reset.
- */
- if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) {
- /* turn off ATR, enable perfect filters and reset */
- if (data & NETIF_F_NTUPLE) {
- adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE;
- adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- need_reset = true;
- }
- } else if (!(data & NETIF_F_NTUPLE)) {
- /* turn off Flow Director, set ATR and reset */
- adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
- if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) &&
- !(adapter->flags & IXGBE_FLAG_DCB_ENABLED))
- adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
- need_reset = true;
- }
-
- if (need_reset)
- ixgbe_do_reset(netdev);
-
- return 0;
-
-}
-
-static const struct net_device_ops ixgbe_netdev_ops = {
- .ndo_open = ixgbe_open,
- .ndo_stop = ixgbe_close,
- .ndo_start_xmit = ixgbe_xmit_frame,
- .ndo_select_queue = ixgbe_select_queue,
- .ndo_set_rx_mode = ixgbe_set_rx_mode,
- .ndo_set_multicast_list = ixgbe_set_rx_mode,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = ixgbe_set_mac,
- .ndo_change_mtu = ixgbe_change_mtu,
- .ndo_tx_timeout = ixgbe_tx_timeout,
- .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid,
- .ndo_do_ioctl = ixgbe_ioctl,
- .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac,
- .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan,
- .ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw,
- .ndo_get_vf_config = ixgbe_ndo_get_vf_config,
- .ndo_get_stats64 = ixgbe_get_stats64,
- .ndo_setup_tc = ixgbe_setup_tc,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ixgbe_netpoll,
-#endif
-#ifdef IXGBE_FCOE
- .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get,
- .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target,
- .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
- .ndo_fcoe_enable = ixgbe_fcoe_enable,
- .ndo_fcoe_disable = ixgbe_fcoe_disable,
- .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
-#endif /* IXGBE_FCOE */
- .ndo_set_features = ixgbe_set_features,
- .ndo_fix_features = ixgbe_fix_features,
-};
-
-static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter,
- const struct ixgbe_info *ii)
-{
-#ifdef CONFIG_PCI_IOV
- struct ixgbe_hw *hw = &adapter->hw;
- int err;
- int num_vf_macvlans, i;
- struct vf_macvlans *mv_list;
-
- if (hw->mac.type == ixgbe_mac_82598EB || !max_vfs)
- return;
-
- /* The 82599 supports up to 64 VFs per physical function
- * but this implementation limits allocation to 63 so that
- * basic networking resources are still available to the
- * physical function
- */
- adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs;
- adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED;
- err = pci_enable_sriov(adapter->pdev, adapter->num_vfs);
- if (err) {
- e_err(probe, "Failed to enable PCI sriov: %d\n", err);
- goto err_novfs;
- }
-
- num_vf_macvlans = hw->mac.num_rar_entries -
- (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs);
-
- adapter->mv_list = mv_list = kcalloc(num_vf_macvlans,
- sizeof(struct vf_macvlans),
- GFP_KERNEL);
- if (mv_list) {
- /* Initialize list of VF macvlans */
- INIT_LIST_HEAD(&adapter->vf_mvs.l);
- for (i = 0; i < num_vf_macvlans; i++) {
- mv_list->vf = -1;
- mv_list->free = true;
- mv_list->rar_entry = hw->mac.num_rar_entries -
- (i + adapter->num_vfs + 1);
- list_add(&mv_list->l, &adapter->vf_mvs.l);
- mv_list++;
- }
- }
-
- /* If call to enable VFs succeeded then allocate memory
- * for per VF control structures.
- */
- adapter->vfinfo =
- kcalloc(adapter->num_vfs,
- sizeof(struct vf_data_storage), GFP_KERNEL);
- if (adapter->vfinfo) {
- /* Now that we're sure SR-IOV is enabled
- * and memory allocated set up the mailbox parameters
- */
- ixgbe_init_mbx_params_pf(hw);
- memcpy(&hw->mbx.ops, ii->mbx_ops,
- sizeof(hw->mbx.ops));
-
- /* Disable RSC when in SR-IOV mode */
- adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE |
- IXGBE_FLAG2_RSC_ENABLED);
- return;
- }
-
- /* Oh oh */
- e_err(probe, "Unable to allocate memory for VF Data Storage - "
- "SRIOV disabled\n");
- pci_disable_sriov(adapter->pdev);
-
-err_novfs:
- adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED;
- adapter->num_vfs = 0;
-#endif /* CONFIG_PCI_IOV */
-}
-
-/**
- * ixgbe_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in ixgbe_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * ixgbe_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit ixgbe_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct ixgbe_adapter *adapter = NULL;
- struct ixgbe_hw *hw;
- const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
- static int cards_found;
- int i, err, pci_using_dac;
- u8 part_str[IXGBE_PBANUM_LENGTH];
- unsigned int indices = num_possible_cpus();
-#ifdef IXGBE_FCOE
- u16 device_caps;
-#endif
- u32 eec;
-
- /* Catch broken hardware that put the wrong VF device ID in
- * the PCIe SR-IOV capability.
- */
- if (pdev->is_virtfn) {
- WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n",
- pci_name(pdev), pdev->vendor, pdev->device);
- return -EINVAL;
- }
-
- err = pci_enable_device_mem(pdev);
- if (err)
- return err;
-
- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
- !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
- DMA_BIT_MASK(32));
- if (err) {
- dev_err(&pdev->dev,
- "No usable DMA configuration, aborting\n");
- goto err_dma;
- }
- }
- pci_using_dac = 0;
- }
-
- err = pci_request_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM), ixgbe_driver_name);
- if (err) {
- dev_err(&pdev->dev,
- "pci_request_selected_regions failed 0x%x\n", err);
- goto err_pci_reg;
- }
-
- pci_enable_pcie_error_reporting(pdev);
-
- pci_set_master(pdev);
- pci_save_state(pdev);
-
-#ifdef CONFIG_IXGBE_DCB
- indices *= MAX_TRAFFIC_CLASS;
-#endif
-
- if (ii->mac == ixgbe_mac_82598EB)
- indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES);
- else
- indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES);
-
-#ifdef IXGBE_FCOE
- indices += min_t(unsigned int, num_possible_cpus(),
- IXGBE_MAX_FCOE_INDICES);
-#endif
- netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices);
- if (!netdev) {
- err = -ENOMEM;
- goto err_alloc_etherdev;
- }
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- adapter = netdev_priv(netdev);
- pci_set_drvdata(pdev, adapter);
-
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- hw = &adapter->hw;
- hw->back = adapter;
- adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
-
- hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (!hw->hw_addr) {
- err = -EIO;
- goto err_ioremap;
- }
-
- for (i = 1; i <= 5; i++) {
- if (pci_resource_len(pdev, i) == 0)
- continue;
- }
-
- netdev->netdev_ops = &ixgbe_netdev_ops;
- ixgbe_set_ethtool_ops(netdev);
- netdev->watchdog_timeo = 5 * HZ;
- strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1);
-
- adapter->bd_number = cards_found;
-
- /* Setup hw api */
- memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
- hw->mac.type = ii->mac;
-
- /* EEPROM */
- memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops));
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
- /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */
- if (!(eec & (1 << 8)))
- hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic;
-
- /* PHY */
- memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops));
- hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- /* ixgbe_identify_phy_generic will set prtad and mmds properly */
- hw->phy.mdio.prtad = MDIO_PRTAD_NONE;
- hw->phy.mdio.mmds = 0;
- hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
- hw->phy.mdio.dev = netdev;
- hw->phy.mdio.mdio_read = ixgbe_mdio_read;
- hw->phy.mdio.mdio_write = ixgbe_mdio_write;
-
- ii->get_invariants(hw);
-
- /* setup the private structure */
- err = ixgbe_sw_init(adapter);
- if (err)
- goto err_sw_init;
-
- /* Make it possible the adapter to be woken up via WOL */
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
- break;
- default:
- break;
- }
-
- /*
- * If there is a fan on this device and it has failed log the
- * failure.
- */
- if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) {
- u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
- if (esdp & IXGBE_ESDP_SDP1)
- e_crit(probe, "Fan has stopped, replace the adapter\n");
- }
-
- /* reset_hw fills in the perm_addr as well */
- hw->phy.reset_if_overtemp = true;
- err = hw->mac.ops.reset_hw(hw);
- hw->phy.reset_if_overtemp = false;
- if (err == IXGBE_ERR_SFP_NOT_PRESENT &&
- hw->mac.type == ixgbe_mac_82598EB) {
- err = 0;
- } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
- e_dev_err("failed to load because an unsupported SFP+ "
- "module type was detected.\n");
- e_dev_err("Reload the driver after installing a supported "
- "module.\n");
- goto err_sw_init;
- } else if (err) {
- e_dev_err("HW Init failed: %d\n", err);
- goto err_sw_init;
- }
-
- ixgbe_probe_vf(adapter, ii);
-
- netdev->features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_IPV6_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER |
- NETIF_F_TSO |
- NETIF_F_TSO6 |
- NETIF_F_GRO |
- NETIF_F_RXHASH |
- NETIF_F_RXCSUM;
-
- netdev->hw_features = netdev->features;
-
- switch (adapter->hw.mac.type) {
- case ixgbe_mac_82599EB:
- case ixgbe_mac_X540:
- netdev->features |= NETIF_F_SCTP_CSUM;
- netdev->hw_features |= NETIF_F_SCTP_CSUM |
- NETIF_F_NTUPLE;
- break;
- default:
- break;
- }
-
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
- netdev->vlan_features |= NETIF_F_IP_CSUM;
- netdev->vlan_features |= NETIF_F_IPV6_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
- adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED |
- IXGBE_FLAG_DCB_ENABLED);
-
-#ifdef CONFIG_IXGBE_DCB
- netdev->dcbnl_ops = &dcbnl_ops;
-#endif
-
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
- if (hw->mac.ops.get_device_caps) {
- hw->mac.ops.get_device_caps(hw, &device_caps);
- if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
- adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
- }
- }
- if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
- netdev->vlan_features |= NETIF_F_FCOE_CRC;
- netdev->vlan_features |= NETIF_F_FSO;
- netdev->vlan_features |= NETIF_F_FCOE_MTU;
- }
-#endif /* IXGBE_FCOE */
- if (pci_using_dac) {
- netdev->features |= NETIF_F_HIGHDMA;
- netdev->vlan_features |= NETIF_F_HIGHDMA;
- }
-
- if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)
- netdev->hw_features |= NETIF_F_LRO;
- if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)
- netdev->features |= NETIF_F_LRO;
-
- /* make sure the EEPROM is good */
- if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) {
- e_dev_err("The EEPROM Checksum Is Not Valid\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len);
- memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len);
-
- if (ixgbe_validate_mac_addr(netdev->perm_addr)) {
- e_dev_err("invalid MAC address\n");
- err = -EIO;
- goto err_eeprom;
- }
-
- /* power down the optics for multispeed fiber and 82599 SFP+ fiber */
- if (hw->mac.ops.disable_tx_laser &&
- ((hw->phy.multispeed_fiber) ||
- ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
- (hw->mac.type == ixgbe_mac_82599EB))))
- hw->mac.ops.disable_tx_laser(hw);
-
- setup_timer(&adapter->service_timer, &ixgbe_service_timer,
- (unsigned long) adapter);
-
- INIT_WORK(&adapter->service_task, ixgbe_service_task);
- clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state);
-
- err = ixgbe_init_interrupt_scheme(adapter);
- if (err)
- goto err_sw_init;
-
- if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) {
- netdev->hw_features &= ~NETIF_F_RXHASH;
- netdev->features &= ~NETIF_F_RXHASH;
- }
-
- switch (pdev->device) {
- case IXGBE_DEV_ID_82599_SFP:
- /* Only this subdevice supports WOL */
- if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP)
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
- /* All except this subdevice support WOL */
- if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ)
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- case IXGBE_DEV_ID_82599_KX4:
- adapter->wol = IXGBE_WUFC_MAG;
- break;
- default:
- adapter->wol = 0;
- break;
- }
- device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
-
- /* pick up the PCI bus settings for reporting later */
- hw->mac.ops.get_bus_info(hw);
-
- /* print bus type/speed/width info */
- e_dev_info("(PCI Express:%s:%s) %pM\n",
- (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" :
- hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" :
- "Unknown"),
- (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" :
- hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" :
- hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" :
- "Unknown"),
- netdev->dev_addr);
-
- err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH);
- if (err)
- strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH);
- if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present)
- e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n",
- hw->mac.type, hw->phy.type, hw->phy.sfp_type,
- part_str);
- else
- e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n",
- hw->mac.type, hw->phy.type, part_str);
-
- if (hw->bus.width <= ixgbe_bus_width_pcie_x4) {
- e_dev_warn("PCI-Express bandwidth available for this card is "
- "not sufficient for optimal performance.\n");
- e_dev_warn("For optimal performance a x8 PCI-Express slot "
- "is required.\n");
- }
-
- /* save off EEPROM version number */
- hw->eeprom.ops.read(hw, 0x29, &adapter->eeprom_version);
-
- /* reset the hardware with the new settings */
- err = hw->mac.ops.start_hw(hw);
-
- if (err == IXGBE_ERR_EEPROM_VERSION) {
- /* We are running on a pre-production device, log a warning */
- e_dev_warn("This device is a pre-production adapter/LOM. "
- "Please be aware there may be issues associated "
- "with your hardware. If you are experiencing "
- "problems please contact your Intel or hardware "
- "representative who provided you with this "
- "hardware.\n");
- }
- strcpy(netdev->name, "eth%d");
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- /* carrier off reporting is important to ethtool even BEFORE open */
- netif_carrier_off(netdev);
-
-#ifdef CONFIG_IXGBE_DCA
- if (dca_add_requester(&pdev->dev) == 0) {
- adapter->flags |= IXGBE_FLAG_DCA_ENABLED;
- ixgbe_setup_dca(adapter);
- }
-#endif
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) {
- e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs);
- for (i = 0; i < adapter->num_vfs; i++)
- ixgbe_vf_configuration(pdev, (i | 0x10000000));
- }
-
- /* Inform firmware of driver version */
- if (hw->mac.ops.set_fw_drv_ver)
- hw->mac.ops.set_fw_drv_ver(hw, MAJ, MIN, BUILD,
- FW_CEM_UNUSED_VER);
-
- /* add san mac addr to netdev */
- ixgbe_add_sanmac_netdev(netdev);
-
- e_dev_info("Intel(R) 10 Gigabit Network Connection\n");
- cards_found++;
- return 0;
-
-err_register:
- ixgbe_release_hw_control(adapter);
- ixgbe_clear_interrupt_scheme(adapter);
-err_sw_init:
-err_eeprom:
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
- ixgbe_disable_sriov(adapter);
- adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP;
- iounmap(hw->hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_selected_regions(pdev,
- pci_select_bars(pdev, IORESOURCE_MEM));
-err_pci_reg:
-err_dma:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * ixgbe_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * ixgbe_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-static void __devexit ixgbe_remove(struct pci_dev *pdev)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
-
- set_bit(__IXGBE_DOWN, &adapter->state);
- cancel_work_sync(&adapter->service_task);
-
-#ifdef CONFIG_IXGBE_DCA
- if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) {
- adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED;
- dca_remove_requester(&pdev->dev);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1);
- }
-
-#endif
-#ifdef IXGBE_FCOE
- if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)
- ixgbe_cleanup_fcoe(adapter);
-
-#endif /* IXGBE_FCOE */
-
- /* remove the added san mac */
- ixgbe_del_sanmac_netdev(netdev);
-
- if (netdev->reg_state == NETREG_REGISTERED)
- unregister_netdev(netdev);
-
- if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)
- ixgbe_disable_sriov(adapter);
-
- ixgbe_clear_interrupt_scheme(adapter);
-
- ixgbe_release_hw_control(adapter);
-
- iounmap(adapter->hw.hw_addr);
- pci_release_selected_regions(pdev, pci_select_bars(pdev,
- IORESOURCE_MEM));
-
- e_dev_info("complete\n");
-
- free_netdev(netdev);
-
- pci_disable_pcie_error_reporting(pdev);
-
- pci_disable_device(pdev);
-}
-
-/**
- * ixgbe_io_error_detected - called when PCI error is detected
- * @pdev: Pointer to PCI device
- * @state: The current pci connection state
- *
- * This function is called after a PCI bus error affecting
- * this device has been detected.
- */
-static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev,
- pci_channel_state_t state)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
-
- netif_device_detach(netdev);
-
- if (state == pci_channel_io_perm_failure)
- return PCI_ERS_RESULT_DISCONNECT;
-
- if (netif_running(netdev))
- ixgbe_down(adapter);
- pci_disable_device(pdev);
-
- /* Request a slot reset. */
- return PCI_ERS_RESULT_NEED_RESET;
-}
-
-/**
- * ixgbe_io_slot_reset - called after the pci bus has been reset.
- * @pdev: Pointer to PCI device
- *
- * Restart the card from scratch, as if from a cold-boot.
- */
-static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- pci_ers_result_t result;
- int err;
-
- if (pci_enable_device_mem(pdev)) {
- e_err(probe, "Cannot re-enable PCI device after reset.\n");
- result = PCI_ERS_RESULT_DISCONNECT;
- } else {
- pci_set_master(pdev);
- pci_restore_state(pdev);
- pci_save_state(pdev);
-
- pci_wake_from_d3(pdev, false);
-
- ixgbe_reset(adapter);
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
- result = PCI_ERS_RESULT_RECOVERED;
- }
-
- err = pci_cleanup_aer_uncorrect_error_status(pdev);
- if (err) {
- e_dev_err("pci_cleanup_aer_uncorrect_error_status "
- "failed 0x%0x\n", err);
- /* non-fatal, continue */
- }
-
- return result;
-}
-
-/**
- * ixgbe_io_resume - called when traffic can start flowing again.
- * @pdev: Pointer to PCI device
- *
- * This callback is called when the error recovery driver tells us that
- * its OK to resume normal operation.
- */
-static void ixgbe_io_resume(struct pci_dev *pdev)
-{
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- struct net_device *netdev = adapter->netdev;
-
- if (netif_running(netdev)) {
- if (ixgbe_up(adapter)) {
- e_info(probe, "ixgbe_up failed after reset\n");
- return;
- }
- }
-
- netif_device_attach(netdev);
-}
-
-static struct pci_error_handlers ixgbe_err_handler = {
- .error_detected = ixgbe_io_error_detected,
- .slot_reset = ixgbe_io_slot_reset,
- .resume = ixgbe_io_resume,
-};
-
-static struct pci_driver ixgbe_driver = {
- .name = ixgbe_driver_name,
- .id_table = ixgbe_pci_tbl,
- .probe = ixgbe_probe,
- .remove = __devexit_p(ixgbe_remove),
-#ifdef CONFIG_PM
- .suspend = ixgbe_suspend,
- .resume = ixgbe_resume,
-#endif
- .shutdown = ixgbe_shutdown,
- .err_handler = &ixgbe_err_handler
-};
-
-/**
- * ixgbe_init_module - Driver Registration Routine
- *
- * ixgbe_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-static int __init ixgbe_init_module(void)
-{
- int ret;
- pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version);
- pr_info("%s\n", ixgbe_copyright);
-
-#ifdef CONFIG_IXGBE_DCA
- dca_register_notify(&dca_notifier);
-#endif
-
- ret = pci_register_driver(&ixgbe_driver);
- return ret;
-}
-
-module_init(ixgbe_init_module);
-
-/**
- * ixgbe_exit_module - Driver Exit Cleanup Routine
- *
- * ixgbe_exit_module is called just before the driver is removed
- * from memory.
- **/
-static void __exit ixgbe_exit_module(void)
-{
-#ifdef CONFIG_IXGBE_DCA
- dca_unregister_notify(&dca_notifier);
-#endif
- pci_unregister_driver(&ixgbe_driver);
- rcu_barrier(); /* Wait for completion of call_rcu()'s */
-}
-
-#ifdef CONFIG_IXGBE_DCA
-static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event,
- void *p)
-{
- int ret_val;
-
- ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event,
- __ixgbe_notify_dca);
-
- return ret_val ? NOTIFY_BAD : NOTIFY_DONE;
-}
-
-#endif /* CONFIG_IXGBE_DCA */
-
-module_exit(ixgbe_exit_module);
-
-/* ixgbe_main.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include "ixgbe_type.h"
-#include "ixgbe_common.h"
-#include "ixgbe_mbx.h"
-
-/**
- * ixgbe_read_mbx - Reads a message from the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to read
- *
- * returns SUCCESS if it successfuly read message from buffer
- **/
-s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- /* limit read to size of mailbox */
- if (size > mbx->size)
- size = mbx->size;
-
- if (mbx->ops.read)
- ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-
- return ret_val;
-}
-
-/**
- * ixgbe_write_mbx - Write a message to the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully copied message into the buffer
- **/
-s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = 0;
-
- if (size > mbx->size)
- ret_val = IXGBE_ERR_MBX;
-
- else if (mbx->ops.write)
- ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_msg - checks to see if someone sent us mail
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (mbx->ops.check_for_msg)
- ret_val = mbx->ops.check_for_msg(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_ack - checks to see if someone sent us ACK
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (mbx->ops.check_for_ack)
- ret_val = mbx->ops.check_for_ack(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_rst - checks to see if other side has reset
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to check
- *
- * returns SUCCESS if the Status bit was found or else ERR_MBX
- **/
-s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (mbx->ops.check_for_rst)
- ret_val = mbx->ops.check_for_rst(hw, mbx_id);
-
- return ret_val;
-}
-
-/**
- * ixgbe_poll_for_msg - Wait for message notification
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message notification
- **/
-static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!countdown || !mbx->ops.check_for_msg)
- goto out;
-
- while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
- countdown--;
- if (!countdown)
- break;
- udelay(mbx->usec_delay);
- }
-
-out:
- return countdown ? 0 : IXGBE_ERR_MBX;
-}
-
-/**
- * ixgbe_poll_for_ack - Wait for message acknowledgement
- * @hw: pointer to the HW structure
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message acknowledgement
- **/
-static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- if (!countdown || !mbx->ops.check_for_ack)
- goto out;
-
- while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
- countdown--;
- if (!countdown)
- break;
- udelay(mbx->usec_delay);
- }
-
-out:
- return countdown ? 0 : IXGBE_ERR_MBX;
-}
-
-/**
- * ixgbe_read_posted_mbx - Wait for message notification and receive message
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully received a message notification and
- * copied it into the receive buffer.
- **/
-static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
- u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (!mbx->ops.read)
- goto out;
-
- ret_val = ixgbe_poll_for_msg(hw, mbx_id);
-
- /* if ack received read message, otherwise we timed out */
- if (!ret_val)
- ret_val = mbx->ops.read(hw, msg, size, mbx_id);
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @mbx_id: id of mailbox to write
- *
- * returns SUCCESS if it successfully copied message into the buffer and
- * received an ack to that message within delay * timeout period
- **/
-static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size,
- u16 mbx_id)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- /* exit if either we can't write or there isn't a defined timeout */
- if (!mbx->ops.write || !mbx->timeout)
- goto out;
-
- /* send msg */
- ret_val = mbx->ops.write(hw, msg, size, mbx_id);
-
- /* if msg sent wait until we receive an ack */
- if (!ret_val)
- ret_val = ixgbe_poll_for_ack(hw, mbx_id);
-out:
- return ret_val;
-}
-
-static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index)
-{
- u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index));
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (mbvficr & mask) {
- ret_val = 0;
- IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask);
- }
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number)
-{
- s32 ret_val = IXGBE_ERR_MBX;
- s32 index = IXGBE_MBVFICR_INDEX(vf_number);
- u32 vf_bit = vf_number % 16;
-
- if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit,
- index)) {
- ret_val = 0;
- hw->mbx.stats.reqs++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number)
-{
- s32 ret_val = IXGBE_ERR_MBX;
- s32 index = IXGBE_MBVFICR_INDEX(vf_number);
- u32 vf_bit = vf_number % 16;
-
- if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit,
- index)) {
- ret_val = 0;
- hw->mbx.stats.acks++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbe_check_for_rst_pf - checks to see if the VF has reset
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * returns SUCCESS if the VF has set the Status bit or else ERR_MBX
- **/
-static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number)
-{
- u32 reg_offset = (vf_number < 32) ? 0 : 1;
- u32 vf_shift = vf_number % 32;
- u32 vflre = 0;
- s32 ret_val = IXGBE_ERR_MBX;
-
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset));
- break;
- case ixgbe_mac_X540:
- vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset));
- break;
- default:
- break;
- }
-
- if (vflre & (1 << vf_shift)) {
- ret_val = 0;
- IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift));
- hw->mbx.stats.rsts++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock
- * @hw: pointer to the HW structure
- * @vf_number: the VF index
- *
- * return SUCCESS if we obtained the mailbox lock
- **/
-static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number)
-{
- s32 ret_val = IXGBE_ERR_MBX;
- u32 p2v_mailbox;
-
- /* Take ownership of the buffer */
- IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU);
-
- /* reserve mailbox for vf use */
- p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number));
- if (p2v_mailbox & IXGBE_PFMAILBOX_PFU)
- ret_val = 0;
-
- return ret_val;
-}
-
-/**
- * ixgbe_write_mbx_pf - Places a message in the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @vf_number: the VF index
- *
- * returns SUCCESS if it successfully copied message into the buffer
- **/
-static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
- u16 vf_number)
-{
- s32 ret_val;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
- if (ret_val)
- goto out_no_write;
-
- /* flush msg and acks as we are overwriting the message buffer */
- ixgbe_check_for_msg_pf(hw, vf_number);
- ixgbe_check_for_ack_pf(hw, vf_number);
-
- /* copy the caller specified message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]);
-
- /* Interrupt VF to tell it a message has been sent and release buffer*/
- IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS);
-
- /* update stats */
- hw->mbx.stats.msgs_tx++;
-
-out_no_write:
- return ret_val;
-
-}
-
-/**
- * ixgbe_read_mbx_pf - Read a message from the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- * @vf_number: the VF index
- *
- * This function copies a message from the mailbox buffer to the caller's
- * memory buffer. The presumption is that the caller knows that there was
- * a message due to a VF request so no polling for message is needed.
- **/
-static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size,
- u16 vf_number)
-{
- s32 ret_val;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number);
- if (ret_val)
- goto out_no_read;
-
- /* copy the message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i);
-
- /* Acknowledge the message and release buffer */
- IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK);
-
- /* update stats */
- hw->mbx.stats.msgs_rx++;
-
-out_no_read:
- return ret_val;
-}
-
-#ifdef CONFIG_PCI_IOV
-/**
- * ixgbe_init_mbx_params_pf - set initial values for pf mailbox
- * @hw: pointer to the HW structure
- *
- * Initializes the hw->mbx struct to correct values for pf mailbox
- */
-void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
-
- if (hw->mac.type != ixgbe_mac_82599EB &&
- hw->mac.type != ixgbe_mac_X540)
- return;
-
- mbx->timeout = 0;
- mbx->usec_delay = 0;
-
- mbx->stats.msgs_tx = 0;
- mbx->stats.msgs_rx = 0;
- mbx->stats.reqs = 0;
- mbx->stats.acks = 0;
- mbx->stats.rsts = 0;
-
- mbx->size = IXGBE_VFMAILBOX_SIZE;
-}
-#endif /* CONFIG_PCI_IOV */
-
-struct ixgbe_mbx_operations mbx_ops_generic = {
- .read = ixgbe_read_mbx_pf,
- .write = ixgbe_write_mbx_pf,
- .read_posted = ixgbe_read_posted_mbx,
- .write_posted = ixgbe_write_posted_mbx,
- .check_for_msg = ixgbe_check_for_msg_pf,
- .check_for_ack = ixgbe_check_for_ack_pf,
- .check_for_rst = ixgbe_check_for_rst_pf,
-};
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_MBX_H_
-#define _IXGBE_MBX_H_
-
-#include "ixgbe_type.h"
-
-#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
-#define IXGBE_ERR_MBX -100
-
-#define IXGBE_VFMAILBOX 0x002FC
-#define IXGBE_VFMBMEM 0x00200
-
-#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
-#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
-#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
-
-#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
-#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
-#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
-#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
-
-
-/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
- * PF. The reverse is true if it is IXGBE_PF_*.
- * Message ACK's are the value or'd with 0xF0000000
- */
-#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
- * this are the ACK */
-#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
- * this are the NACK */
-#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
- clear to send requests */
-#define IXGBE_VT_MSGINFO_SHIFT 16
-/* bits 23:16 are used for exra info for certain messages */
-#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
-
-#define IXGBE_VF_RESET 0x01 /* VF requests reset */
-#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
-#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
-#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
-#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
-#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
-
-/* length of permanent address message returned from PF */
-#define IXGBE_VF_PERMADDR_MSG_LEN 4
-/* word in permanent address message with the current multicast type */
-#define IXGBE_VF_MC_TYPE_WORD 3
-
-#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */
-
-#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
-#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
-
-s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16);
-s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16);
-s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16);
-s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16);
-s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16);
-#ifdef CONFIG_PCI_IOV
-void ixgbe_init_mbx_params_pf(struct ixgbe_hw *);
-#endif /* CONFIG_PCI_IOV */
-
-extern struct ixgbe_mbx_operations mbx_ops_generic;
-
-#endif /* _IXGBE_MBX_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe_common.h"
-#include "ixgbe_phy.h"
-
-static void ixgbe_i2c_start(struct ixgbe_hw *hw);
-static void ixgbe_i2c_stop(struct ixgbe_hw *hw);
-static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data);
-static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data);
-static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw);
-static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
-static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
-static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
-static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
-static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
-static bool ixgbe_get_i2c_data(u32 *i2cctl);
-static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw);
-static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
-static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
-
-/**
- * ixgbe_identify_phy_generic - Get physical layer module
- * @hw: pointer to hardware structure
- *
- * Determines the physical layer module found on the current adapter.
- **/
-s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
- u32 phy_addr;
- u16 ext_ability = 0;
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
- hw->phy.mdio.prtad = phy_addr;
- if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
- ixgbe_get_phy_id(hw);
- hw->phy.type =
- ixgbe_get_phy_type_from_id(hw->phy.id);
-
- if (hw->phy.type == ixgbe_phy_unknown) {
- hw->phy.ops.read_reg(hw,
- MDIO_PMA_EXTABLE,
- MDIO_MMD_PMAPMD,
- &ext_ability);
- if (ext_ability &
- (MDIO_PMA_EXTABLE_10GBT |
- MDIO_PMA_EXTABLE_1000BT))
- hw->phy.type =
- ixgbe_phy_cu_unknown;
- else
- hw->phy.type =
- ixgbe_phy_generic;
- }
-
- status = 0;
- break;
- }
- }
- /* clear value if nothing found */
- if (status != 0)
- hw->phy.mdio.prtad = 0;
- } else {
- status = 0;
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_phy_id - Get the phy type
- * @hw: pointer to hardware structure
- *
- **/
-static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
-{
- u32 status;
- u16 phy_id_high = 0;
- u16 phy_id_low = 0;
-
- status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD,
- &phy_id_high);
-
- if (status == 0) {
- hw->phy.id = (u32)(phy_id_high << 16);
- status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD,
- &phy_id_low);
- hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
- hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
- }
- return status;
-}
-
-/**
- * ixgbe_get_phy_type_from_id - Get the phy type
- * @hw: pointer to hardware structure
- *
- **/
-static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
-{
- enum ixgbe_phy_type phy_type;
-
- switch (phy_id) {
- case TN1010_PHY_ID:
- phy_type = ixgbe_phy_tn;
- break;
- case X540_PHY_ID:
- phy_type = ixgbe_phy_aq;
- break;
- case QT2022_PHY_ID:
- phy_type = ixgbe_phy_qt;
- break;
- case ATH_PHY_ID:
- phy_type = ixgbe_phy_nl;
- break;
- default:
- phy_type = ixgbe_phy_unknown;
- break;
- }
-
- return phy_type;
-}
-
-/**
- * ixgbe_reset_phy_generic - Performs a PHY reset
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
-{
- u32 i;
- u16 ctrl = 0;
- s32 status = 0;
-
- if (hw->phy.type == ixgbe_phy_unknown)
- status = ixgbe_identify_phy_generic(hw);
-
- if (status != 0 || hw->phy.type == ixgbe_phy_none)
- goto out;
-
- /* Don't reset PHY if it's shut down due to overtemp. */
- if (!hw->phy.reset_if_overtemp &&
- (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
- goto out;
-
- /*
- * Perform soft PHY reset to the PHY_XS.
- * This will cause a soft reset to the PHY
- */
- hw->phy.ops.write_reg(hw, MDIO_CTRL1,
- MDIO_MMD_PHYXS,
- MDIO_CTRL1_RESET);
-
- /*
- * Poll for reset bit to self-clear indicating reset is complete.
- * Some PHYs could take up to 3 seconds to complete and need about
- * 1.7 usec delay after the reset is complete.
- */
- for (i = 0; i < 30; i++) {
- msleep(100);
- hw->phy.ops.read_reg(hw, MDIO_CTRL1,
- MDIO_MMD_PHYXS, &ctrl);
- if (!(ctrl & MDIO_CTRL1_RESET)) {
- udelay(2);
- break;
- }
- }
-
- if (ctrl & MDIO_CTRL1_RESET) {
- status = IXGBE_ERR_RESET_FAILED;
- hw_dbg(hw, "PHY reset polling failed to complete.\n");
- }
-
-out:
- return status;
-}
-
-/**
- * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit address of PHY register to read
- * @phy_data: Pointer to read data from PHY register
- **/
-s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data)
-{
- u32 command;
- u32 i;
- u32 data;
- s32 status = 0;
- u16 gssr;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == 0) {
- /* Setup and write the address cycle command */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle completed.
- * The MDI Command bit will clear when the operation is
- * complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address command did not complete.\n");
- status = IXGBE_ERR_PHY;
- }
-
- if (status == 0) {
- /*
- * Address cycle complete, setup and write the read
- * command
- */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.mdio.prtad <<
- IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle
- * completed. The MDI Command bit will clear when the
- * operation is complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY read command didn't complete\n");
- status = IXGBE_ERR_PHY;
- } else {
- /*
- * Read operation is complete. Get the data
- * from MSRWD
- */
- data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
- data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
- *phy_data = (u16)(data);
- }
- }
-
- hw->mac.ops.release_swfw_sync(hw, gssr);
- }
-
- return status;
-}
-
-/**
- * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
- * @hw: pointer to hardware structure
- * @reg_addr: 32 bit PHY register to write
- * @device_type: 5 bit device type
- * @phy_data: Data to write to the PHY register
- **/
-s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data)
-{
- u32 command;
- u32 i;
- s32 status = 0;
- u16 gssr;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == 0) {
- /* Put the data in the MDI single read and write data register*/
- IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
-
- /* Setup and write the address cycle command */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle completed.
- * The MDI Command bit will clear when the operation is
- * complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
- }
-
- if (status == 0) {
- /*
- * Address cycle complete, setup and write the write
- * command
- */
- command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
- (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
- (hw->phy.mdio.prtad <<
- IXGBE_MSCA_PHY_ADDR_SHIFT) |
- (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
-
- IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
-
- /*
- * Check every 10 usec to see if the address cycle
- * completed. The MDI Command bit will clear when the
- * operation is complete
- */
- for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
- udelay(10);
-
- command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
- break;
- }
-
- if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- hw_dbg(hw, "PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
- }
- }
-
- hw->mac.ops.release_swfw_sync(hw, gssr);
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_phy_link_generic - Set and restart autoneg
- * @hw: pointer to hardware structure
- *
- * Restart autonegotiation and PHY and waits for completion.
- **/
-s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
- bool autoneg = false;
- ixgbe_link_speed speed;
-
- ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- /* Set or unset auto-negotiation 10G advertisement */
- hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
-
- hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
- autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE;
-
- hw->phy.ops.write_reg(hw,
- IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- if (speed & IXGBE_LINK_SPEED_100_FULL) {
- /* Set or unset auto-negotiation 100M advertisement */
- hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~(ADVERTISE_100FULL |
- ADVERTISE_100HALF);
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
- autoneg_reg |= ADVERTISE_100FULL;
-
- hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- /* Restart PHY autonegotiation and wait for completion */
- hw->phy.ops.read_reg(hw, MDIO_CTRL1,
- MDIO_MMD_AN, &autoneg_reg);
-
- autoneg_reg |= MDIO_AN_CTRL1_RESTART;
-
- hw->phy.ops.write_reg(hw, MDIO_CTRL1,
- MDIO_MMD_AN, autoneg_reg);
-
- /* Wait for autonegotiation to finish */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- /* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
- if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) {
- break;
- }
- }
-
- if (time_out == max_time_out) {
- status = IXGBE_ERR_LINK_SETUP;
- hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out");
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- **/
-s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete)
-{
-
- /*
- * Clear autoneg_advertised and set new values based on input link
- * speed.
- */
- hw->phy.autoneg_advertised = 0;
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
-
- if (speed & IXGBE_LINK_SPEED_100_FULL)
- hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
-
- /* Setup link based on the new speed settings */
- hw->phy.ops.setup_link(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
- *
- * Determines the link capabilities by reading the AUTOC register.
- */
-s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
-{
- s32 status = IXGBE_ERR_LINK_SETUP;
- u16 speed_ability;
-
- *speed = 0;
- *autoneg = true;
-
- status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD,
- &speed_ability);
-
- if (status == 0) {
- if (speed_ability & MDIO_SPEED_10G)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (speed_ability & MDIO_PMA_SPEED_1000)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
- if (speed_ability & MDIO_PMA_SPEED_100)
- *speed |= IXGBE_LINK_SPEED_100_FULL;
- }
-
- return status;
-}
-
-/**
- * ixgbe_check_phy_link_tnx - Determine link and speed status
- * @hw: pointer to hardware structure
- *
- * Reads the VS1 register to determine if link is up and the current speed for
- * the PHY.
- **/
-s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
- bool *link_up)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 phy_link = 0;
- u16 phy_speed = 0;
- u16 phy_data = 0;
-
- /* Initialize speed and link to default case */
- *link_up = false;
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
-
- /*
- * Check current speed and link status of the PHY register.
- * This is a vendor specific register and may have to
- * be changed for other copper PHYs.
- */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- status = hw->phy.ops.read_reg(hw,
- MDIO_STAT1,
- MDIO_MMD_VEND1,
- &phy_data);
- phy_link = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
- phy_speed = phy_data &
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
- if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
- *link_up = true;
- if (phy_speed ==
- IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
- break;
- }
- }
-
- return status;
-}
-
-/**
- * ixgbe_setup_phy_link_tnx - Set and restart autoneg
- * @hw: pointer to hardware structure
- *
- * Restart autonegotiation and PHY and waits for completion.
- **/
-s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u32 time_out;
- u32 max_time_out = 10;
- u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
- bool autoneg = false;
- ixgbe_link_speed speed;
-
- ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
-
- if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
- /* Set or unset auto-negotiation 10G advertisement */
- hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL)
- autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G;
-
- hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
- /* Set or unset auto-negotiation 1G advertisement */
- hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL)
- autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX;
-
- hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- if (speed & IXGBE_LINK_SPEED_100_FULL) {
- /* Set or unset auto-negotiation 100M advertisement */
- hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= ~(ADVERTISE_100FULL |
- ADVERTISE_100HALF);
- if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL)
- autoneg_reg |= ADVERTISE_100FULL;
-
- hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE,
- MDIO_MMD_AN,
- autoneg_reg);
- }
-
- /* Restart PHY autonegotiation and wait for completion */
- hw->phy.ops.read_reg(hw, MDIO_CTRL1,
- MDIO_MMD_AN, &autoneg_reg);
-
- autoneg_reg |= MDIO_AN_CTRL1_RESTART;
-
- hw->phy.ops.write_reg(hw, MDIO_CTRL1,
- MDIO_MMD_AN, autoneg_reg);
-
- /* Wait for autonegotiation to finish */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- udelay(10);
- /* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, MDIO_STAT1,
- MDIO_MMD_AN,
- &autoneg_reg);
-
- autoneg_reg &= MDIO_AN_STAT1_COMPLETE;
- if (autoneg_reg == MDIO_AN_STAT1_COMPLETE)
- break;
- }
-
- if (time_out == max_time_out) {
- status = IXGBE_ERR_LINK_SETUP;
- hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out");
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
- **/
-s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
- u16 *firmware_version)
-{
- s32 status = 0;
-
- status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
- MDIO_MMD_VEND1,
- firmware_version);
-
- return status;
-}
-
-/**
- * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
- * @hw: pointer to hardware structure
- * @firmware_version: pointer to the PHY Firmware Version
- **/
-s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
- u16 *firmware_version)
-{
- s32 status = 0;
-
- status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
- MDIO_MMD_VEND1,
- firmware_version);
-
- return status;
-}
-
-/**
- * ixgbe_reset_phy_nl - Performs a PHY reset
- * @hw: pointer to hardware structure
- **/
-s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw)
-{
- u16 phy_offset, control, eword, edata, block_crc;
- bool end_data = false;
- u16 list_offset, data_offset;
- u16 phy_data = 0;
- s32 ret_val = 0;
- u32 i;
-
- hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data);
-
- /* reset the PHY and poll for completion */
- hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
- (phy_data | MDIO_CTRL1_RESET));
-
- for (i = 0; i < 100; i++) {
- hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS,
- &phy_data);
- if ((phy_data & MDIO_CTRL1_RESET) == 0)
- break;
- usleep_range(10000, 20000);
- }
-
- if ((phy_data & MDIO_CTRL1_RESET) != 0) {
- hw_dbg(hw, "PHY reset did not complete.\n");
- ret_val = IXGBE_ERR_PHY;
- goto out;
- }
-
- /* Get init offsets */
- ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
- &data_offset);
- if (ret_val != 0)
- goto out;
-
- ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc);
- data_offset++;
- while (!end_data) {
- /*
- * Read control word from PHY init contents offset
- */
- ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
- control = (eword & IXGBE_CONTROL_MASK_NL) >>
- IXGBE_CONTROL_SHIFT_NL;
- edata = eword & IXGBE_DATA_MASK_NL;
- switch (control) {
- case IXGBE_DELAY_NL:
- data_offset++;
- hw_dbg(hw, "DELAY: %d MS\n", edata);
- usleep_range(edata * 1000, edata * 2000);
- break;
- case IXGBE_DATA_NL:
- hw_dbg(hw, "DATA:\n");
- data_offset++;
- hw->eeprom.ops.read(hw, data_offset++,
- &phy_offset);
- for (i = 0; i < edata; i++) {
- hw->eeprom.ops.read(hw, data_offset, &eword);
- hw->phy.ops.write_reg(hw, phy_offset,
- MDIO_MMD_PMAPMD, eword);
- hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword,
- phy_offset);
- data_offset++;
- phy_offset++;
- }
- break;
- case IXGBE_CONTROL_NL:
- data_offset++;
- hw_dbg(hw, "CONTROL:\n");
- if (edata == IXGBE_CONTROL_EOL_NL) {
- hw_dbg(hw, "EOL\n");
- end_data = true;
- } else if (edata == IXGBE_CONTROL_SOL_NL) {
- hw_dbg(hw, "SOL\n");
- } else {
- hw_dbg(hw, "Bad control value\n");
- ret_val = IXGBE_ERR_PHY;
- goto out;
- }
- break;
- default:
- hw_dbg(hw, "Bad control type\n");
- ret_val = IXGBE_ERR_PHY;
- goto out;
- }
- }
-
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_identify_sfp_module_generic - Identifies SFP modules
- * @hw: pointer to hardware structure
- *
- * Searches for and identifies the SFP module and assigns appropriate PHY type.
- **/
-s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
- u32 vendor_oui = 0;
- enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
- u8 identifier = 0;
- u8 comp_codes_1g = 0;
- u8 comp_codes_10g = 0;
- u8 oui_bytes[3] = {0, 0, 0};
- u8 cable_tech = 0;
- u8 cable_spec = 0;
- u16 enforce_sfp = 0;
-
- if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) {
- hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- status = IXGBE_ERR_SFP_NOT_PRESENT;
- goto out;
- }
-
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_IDENTIFIER,
- &identifier);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- /* LAN ID is needed for sfp_type determination */
- hw->mac.ops.set_lan_id(hw);
-
- if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
- hw->phy.type = ixgbe_phy_sfp_unsupported;
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
- } else {
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_1GBE_COMP_CODES,
- &comp_codes_1g);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_10GBE_COMP_CODES,
- &comp_codes_10g);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_CABLE_TECHNOLOGY,
- &cable_tech);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- /* ID Module
- * =========
- * 0 SFP_DA_CU
- * 1 SFP_SR
- * 2 SFP_LR
- * 3 SFP_DA_CORE0 - 82599-specific
- * 4 SFP_DA_CORE1 - 82599-specific
- * 5 SFP_SR/LR_CORE0 - 82599-specific
- * 6 SFP_SR/LR_CORE1 - 82599-specific
- * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
- * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
- * 9 SFP_1g_cu_CORE0 - 82599-specific
- * 10 SFP_1g_cu_CORE1 - 82599-specific
- */
- if (hw->mac.type == ixgbe_mac_82598EB) {
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_da_cu;
- else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_sr;
- else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
- hw->phy.sfp_type = ixgbe_sfp_type_lr;
- else
- hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- } else if (hw->mac.type == ixgbe_mac_82599EB) {
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
- if (hw->bus.lan_id == 0)
- hw->phy.sfp_type =
- ixgbe_sfp_type_da_cu_core0;
- else
- hw->phy.sfp_type =
- ixgbe_sfp_type_da_cu_core1;
- } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) {
- hw->phy.ops.read_i2c_eeprom(
- hw, IXGBE_SFF_CABLE_SPEC_COMP,
- &cable_spec);
- if (cable_spec &
- IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) {
- if (hw->bus.lan_id == 0)
- hw->phy.sfp_type =
- ixgbe_sfp_type_da_act_lmt_core0;
- else
- hw->phy.sfp_type =
- ixgbe_sfp_type_da_act_lmt_core1;
- } else {
- hw->phy.sfp_type =
- ixgbe_sfp_type_unknown;
- }
- } else if (comp_codes_10g &
- (IXGBE_SFF_10GBASESR_CAPABLE |
- IXGBE_SFF_10GBASELR_CAPABLE)) {
- if (hw->bus.lan_id == 0)
- hw->phy.sfp_type =
- ixgbe_sfp_type_srlr_core0;
- else
- hw->phy.sfp_type =
- ixgbe_sfp_type_srlr_core1;
- } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) {
- if (hw->bus.lan_id == 0)
- hw->phy.sfp_type =
- ixgbe_sfp_type_1g_cu_core0;
- else
- hw->phy.sfp_type =
- ixgbe_sfp_type_1g_cu_core1;
- } else {
- hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- }
- }
-
- if (hw->phy.sfp_type != stored_sfp_type)
- hw->phy.sfp_setup_needed = true;
-
- /* Determine if the SFP+ PHY is dual speed or not. */
- hw->phy.multispeed_fiber = false;
- if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
- (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
- ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
- (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
- hw->phy.multispeed_fiber = true;
-
- /* Determine PHY vendor */
- if (hw->phy.type != ixgbe_phy_nl) {
- hw->phy.id = identifier;
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_VENDOR_OUI_BYTE0,
- &oui_bytes[0]);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_VENDOR_OUI_BYTE1,
- &oui_bytes[1]);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- status = hw->phy.ops.read_i2c_eeprom(hw,
- IXGBE_SFF_VENDOR_OUI_BYTE2,
- &oui_bytes[2]);
-
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
- goto err_read_i2c_eeprom;
-
- vendor_oui =
- ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
- (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
- (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
-
- switch (vendor_oui) {
- case IXGBE_SFF_VENDOR_OUI_TYCO:
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
- hw->phy.type =
- ixgbe_phy_sfp_passive_tyco;
- break;
- case IXGBE_SFF_VENDOR_OUI_FTL:
- if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
- hw->phy.type = ixgbe_phy_sfp_ftl_active;
- else
- hw->phy.type = ixgbe_phy_sfp_ftl;
- break;
- case IXGBE_SFF_VENDOR_OUI_AVAGO:
- hw->phy.type = ixgbe_phy_sfp_avago;
- break;
- case IXGBE_SFF_VENDOR_OUI_INTEL:
- hw->phy.type = ixgbe_phy_sfp_intel;
- break;
- default:
- if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE)
- hw->phy.type =
- ixgbe_phy_sfp_passive_unknown;
- else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE)
- hw->phy.type =
- ixgbe_phy_sfp_active_unknown;
- else
- hw->phy.type = ixgbe_phy_sfp_unknown;
- break;
- }
- }
-
- /* Allow any DA cable vendor */
- if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE |
- IXGBE_SFF_DA_ACTIVE_CABLE)) {
- status = 0;
- goto out;
- }
-
- /* Verify supported 1G SFP modules */
- if (comp_codes_10g == 0 &&
- !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
- hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) {
- hw->phy.type = ixgbe_phy_sfp_unsupported;
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
- goto out;
- }
-
- /* Anything else 82598-based is supported */
- if (hw->mac.type == ixgbe_mac_82598EB) {
- status = 0;
- goto out;
- }
-
- hw->mac.ops.get_device_caps(hw, &enforce_sfp);
- if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
- !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) ||
- (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) {
- /* Make sure we're a supported PHY type */
- if (hw->phy.type == ixgbe_phy_sfp_intel) {
- status = 0;
- } else {
- hw_dbg(hw, "SFP+ module not supported\n");
- hw->phy.type = ixgbe_phy_sfp_unsupported;
- status = IXGBE_ERR_SFP_NOT_SUPPORTED;
- }
- } else {
- status = 0;
- }
- }
-
-out:
- return status;
-
-err_read_i2c_eeprom:
- hw->phy.sfp_type = ixgbe_sfp_type_not_present;
- if (hw->phy.type != ixgbe_phy_nl) {
- hw->phy.id = 0;
- hw->phy.type = ixgbe_phy_unknown;
- }
- return IXGBE_ERR_SFP_NOT_PRESENT;
-}
-
-/**
- * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
- * @hw: pointer to hardware structure
- * @list_offset: offset to the SFP ID list
- * @data_offset: offset to the SFP data block
- *
- * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
- * so it returns the offsets to the phy init sequence block.
- **/
-s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
- u16 *list_offset,
- u16 *data_offset)
-{
- u16 sfp_id;
- u16 sfp_type = hw->phy.sfp_type;
-
- if (hw->phy.sfp_type == ixgbe_sfp_type_unknown)
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
-
- if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
- return IXGBE_ERR_SFP_NOT_PRESENT;
-
- if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) &&
- (hw->phy.sfp_type == ixgbe_sfp_type_da_cu))
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
-
- /*
- * Limiting active cables and 1G Phys must be initialized as
- * SR modules
- */
- if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 ||
- sfp_type == ixgbe_sfp_type_1g_cu_core0)
- sfp_type = ixgbe_sfp_type_srlr_core0;
- else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 ||
- sfp_type == ixgbe_sfp_type_1g_cu_core1)
- sfp_type = ixgbe_sfp_type_srlr_core1;
-
- /* Read offset to PHY init contents */
- hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
-
- if ((!*list_offset) || (*list_offset == 0xFFFF))
- return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
-
- /* Shift offset to first ID word */
- (*list_offset)++;
-
- /*
- * Find the matching SFP ID in the EEPROM
- * and program the init sequence
- */
- hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
-
- while (sfp_id != IXGBE_PHY_INIT_END_NL) {
- if (sfp_id == sfp_type) {
- (*list_offset)++;
- hw->eeprom.ops.read(hw, *list_offset, data_offset);
- if ((!*data_offset) || (*data_offset == 0xFFFF)) {
- hw_dbg(hw, "SFP+ module not supported\n");
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
- } else {
- break;
- }
- } else {
- (*list_offset) += 2;
- if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
- return IXGBE_ERR_PHY;
- }
- }
-
- if (sfp_id == IXGBE_PHY_INIT_END_NL) {
- hw_dbg(hw, "No matching SFP+ module found\n");
- return IXGBE_ERR_SFP_NOT_SUPPORTED;
- }
-
- return 0;
-}
-
-/**
- * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to read
- * @eeprom_data: value read
- *
- * Performs byte read operation to SFP module's EEPROM over I2C interface.
- **/
-s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data)
-{
- return hw->phy.ops.read_i2c_byte(hw, byte_offset,
- IXGBE_I2C_EEPROM_DEV_ADDR,
- eeprom_data);
-}
-
-/**
- * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
- * @hw: pointer to hardware structure
- * @byte_offset: EEPROM byte offset to write
- * @eeprom_data: value to write
- *
- * Performs byte write operation to SFP module's EEPROM over I2C interface.
- **/
-s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 eeprom_data)
-{
- return hw->phy.ops.write_i2c_byte(hw, byte_offset,
- IXGBE_I2C_EEPROM_DEV_ADDR,
- eeprom_data);
-}
-
-/**
- * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to read
- * @data: value read
- *
- * Performs byte read operation to SFP module's EEPROM over I2C interface at
- * a specified deivce address.
- **/
-s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 *data)
-{
- s32 status = 0;
- u32 max_retry = 10;
- u32 retry = 0;
- u16 swfw_mask = 0;
- bool nack = 1;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- swfw_mask = IXGBE_GSSR_PHY1_SM;
- else
- swfw_mask = IXGBE_GSSR_PHY0_SM;
-
- do {
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto read_byte_out;
- }
-
- ixgbe_i2c_start(hw);
-
- /* Device Address and write indication */
- status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- ixgbe_i2c_start(hw);
-
- /* Device Address and read indication */
- status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1));
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- status = ixgbe_clock_in_i2c_byte(hw, data);
- if (status != 0)
- goto fail;
-
- status = ixgbe_clock_out_i2c_bit(hw, nack);
- if (status != 0)
- goto fail;
-
- ixgbe_i2c_stop(hw);
- break;
-
-fail:
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
- msleep(100);
- ixgbe_i2c_bus_clear(hw);
- retry++;
- if (retry < max_retry)
- hw_dbg(hw, "I2C byte read error - Retrying.\n");
- else
- hw_dbg(hw, "I2C byte read error.\n");
-
- } while (retry < max_retry);
-
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
-read_byte_out:
- return status;
-}
-
-/**
- * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
- * @hw: pointer to hardware structure
- * @byte_offset: byte offset to write
- * @data: value to write
- *
- * Performs byte write operation to SFP module's EEPROM over I2C interface at
- * a specified device address.
- **/
-s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 data)
-{
- s32 status = 0;
- u32 max_retry = 1;
- u32 retry = 0;
- u16 swfw_mask = 0;
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- swfw_mask = IXGBE_GSSR_PHY1_SM;
- else
- swfw_mask = IXGBE_GSSR_PHY0_SM;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto write_byte_out;
- }
-
- do {
- ixgbe_i2c_start(hw);
-
- status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- status = ixgbe_clock_out_i2c_byte(hw, byte_offset);
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- status = ixgbe_clock_out_i2c_byte(hw, data);
- if (status != 0)
- goto fail;
-
- status = ixgbe_get_i2c_ack(hw);
- if (status != 0)
- goto fail;
-
- ixgbe_i2c_stop(hw);
- break;
-
-fail:
- ixgbe_i2c_bus_clear(hw);
- retry++;
- if (retry < max_retry)
- hw_dbg(hw, "I2C byte write error - Retrying.\n");
- else
- hw_dbg(hw, "I2C byte write error.\n");
- } while (retry < max_retry);
-
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
-write_byte_out:
- return status;
-}
-
-/**
- * ixgbe_i2c_start - Sets I2C start condition
- * @hw: pointer to hardware structure
- *
- * Sets I2C start condition (High -> Low on SDA while SCL is High)
- **/
-static void ixgbe_i2c_start(struct ixgbe_hw *hw)
-{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
-
- /* Start condition must begin with data and clock high */
- ixgbe_set_i2c_data(hw, &i2cctl, 1);
- ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- /* Setup time for start condition (4.7us) */
- udelay(IXGBE_I2C_T_SU_STA);
-
- ixgbe_set_i2c_data(hw, &i2cctl, 0);
-
- /* Hold time for start condition (4us) */
- udelay(IXGBE_I2C_T_HD_STA);
-
- ixgbe_lower_i2c_clk(hw, &i2cctl);
-
- /* Minimum low period of clock is 4.7 us */
- udelay(IXGBE_I2C_T_LOW);
-
-}
-
-/**
- * ixgbe_i2c_stop - Sets I2C stop condition
- * @hw: pointer to hardware structure
- *
- * Sets I2C stop condition (Low -> High on SDA while SCL is High)
- **/
-static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
-{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
-
- /* Stop condition must begin with data low and clock high */
- ixgbe_set_i2c_data(hw, &i2cctl, 0);
- ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- /* Setup time for stop condition (4us) */
- udelay(IXGBE_I2C_T_SU_STO);
-
- ixgbe_set_i2c_data(hw, &i2cctl, 1);
-
- /* bus free time between stop and start (4.7us)*/
- udelay(IXGBE_I2C_T_BUF);
-}
-
-/**
- * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
- * @hw: pointer to hardware structure
- * @data: data byte to clock in
- *
- * Clocks in one byte data via I2C data/clock
- **/
-static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
-{
- s32 status = 0;
- s32 i;
- bool bit = 0;
-
- for (i = 7; i >= 0; i--) {
- status = ixgbe_clock_in_i2c_bit(hw, &bit);
- *data |= bit << i;
-
- if (status != 0)
- break;
- }
-
- return status;
-}
-
-/**
- * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
- * @hw: pointer to hardware structure
- * @data: data byte clocked out
- *
- * Clocks out one byte data via I2C data/clock
- **/
-static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
-{
- s32 status = 0;
- s32 i;
- u32 i2cctl;
- bool bit = 0;
-
- for (i = 7; i >= 0; i--) {
- bit = (data >> i) & 0x1;
- status = ixgbe_clock_out_i2c_bit(hw, bit);
-
- if (status != 0)
- break;
- }
-
- /* Release SDA line (set high) */
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- i2cctl |= IXGBE_I2C_DATA_OUT;
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl);
-
- return status;
-}
-
-/**
- * ixgbe_get_i2c_ack - Polls for I2C ACK
- * @hw: pointer to hardware structure
- *
- * Clocks in/out one bit via I2C data/clock
- **/
-static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
-{
- s32 status;
- u32 i = 0;
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- u32 timeout = 10;
- bool ack = 1;
-
- status = ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- if (status != 0)
- goto out;
-
- /* Minimum high period of clock is 4us */
- udelay(IXGBE_I2C_T_HIGH);
-
- /* Poll for ACK. Note that ACK in I2C spec is
- * transition from 1 to 0 */
- for (i = 0; i < timeout; i++) {
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- ack = ixgbe_get_i2c_data(&i2cctl);
-
- udelay(1);
- if (ack == 0)
- break;
- }
-
- if (ack == 1) {
- hw_dbg(hw, "I2C ack was not received.\n");
- status = IXGBE_ERR_I2C;
- }
-
- ixgbe_lower_i2c_clk(hw, &i2cctl);
-
- /* Minimum low period of clock is 4.7 us */
- udelay(IXGBE_I2C_T_LOW);
-
-out:
- return status;
-}
-
-/**
- * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
- * @hw: pointer to hardware structure
- * @data: read data value
- *
- * Clocks in one bit via I2C data/clock
- **/
-static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
-{
- s32 status;
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
-
- status = ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- /* Minimum high period of clock is 4us */
- udelay(IXGBE_I2C_T_HIGH);
-
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- *data = ixgbe_get_i2c_data(&i2cctl);
-
- ixgbe_lower_i2c_clk(hw, &i2cctl);
-
- /* Minimum low period of clock is 4.7 us */
- udelay(IXGBE_I2C_T_LOW);
-
- return status;
-}
-
-/**
- * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
- * @hw: pointer to hardware structure
- * @data: data value to write
- *
- * Clocks out one bit via I2C data/clock
- **/
-static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
-{
- s32 status;
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
-
- status = ixgbe_set_i2c_data(hw, &i2cctl, data);
- if (status == 0) {
- status = ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- /* Minimum high period of clock is 4us */
- udelay(IXGBE_I2C_T_HIGH);
-
- ixgbe_lower_i2c_clk(hw, &i2cctl);
-
- /* Minimum low period of clock is 4.7 us.
- * This also takes care of the data hold time.
- */
- udelay(IXGBE_I2C_T_LOW);
- } else {
- status = IXGBE_ERR_I2C;
- hw_dbg(hw, "I2C data was not set to %X\n", data);
- }
-
- return status;
-}
-/**
- * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
- *
- * Raises the I2C clock line '0'->'1'
- **/
-static s32 ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
-{
- s32 status = 0;
-
- *i2cctl |= IXGBE_I2C_CLK_OUT;
-
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
- IXGBE_WRITE_FLUSH(hw);
-
- /* SCL rise time (1000ns) */
- udelay(IXGBE_I2C_T_RISE);
-
- return status;
-}
-
-/**
- * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
- *
- * Lowers the I2C clock line '1'->'0'
- **/
-static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
-{
-
- *i2cctl &= ~IXGBE_I2C_CLK_OUT;
-
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
- IXGBE_WRITE_FLUSH(hw);
-
- /* SCL fall time (300ns) */
- udelay(IXGBE_I2C_T_FALL);
-}
-
-/**
- * ixgbe_set_i2c_data - Sets the I2C data bit
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
- * @data: I2C data value (0 or 1) to set
- *
- * Sets the I2C data bit
- **/
-static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
-{
- s32 status = 0;
-
- if (data)
- *i2cctl |= IXGBE_I2C_DATA_OUT;
- else
- *i2cctl &= ~IXGBE_I2C_DATA_OUT;
-
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
- IXGBE_WRITE_FLUSH(hw);
-
- /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
- udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
-
- /* Verify data was set correctly */
- *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- if (data != ixgbe_get_i2c_data(i2cctl)) {
- status = IXGBE_ERR_I2C;
- hw_dbg(hw, "Error - I2C data was not set to %X.\n", data);
- }
-
- return status;
-}
-
-/**
- * ixgbe_get_i2c_data - Reads the I2C SDA data bit
- * @hw: pointer to hardware structure
- * @i2cctl: Current value of I2CCTL register
- *
- * Returns the I2C data bit value
- **/
-static bool ixgbe_get_i2c_data(u32 *i2cctl)
-{
- bool data;
-
- if (*i2cctl & IXGBE_I2C_DATA_IN)
- data = 1;
- else
- data = 0;
-
- return data;
-}
-
-/**
- * ixgbe_i2c_bus_clear - Clears the I2C bus
- * @hw: pointer to hardware structure
- *
- * Clears the I2C bus by sending nine clock pulses.
- * Used when data line is stuck low.
- **/
-static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
-{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- u32 i;
-
- ixgbe_i2c_start(hw);
-
- ixgbe_set_i2c_data(hw, &i2cctl, 1);
-
- for (i = 0; i < 9; i++) {
- ixgbe_raise_i2c_clk(hw, &i2cctl);
-
- /* Min high period of clock is 4us */
- udelay(IXGBE_I2C_T_HIGH);
-
- ixgbe_lower_i2c_clk(hw, &i2cctl);
-
- /* Min low period of clock is 4.7us*/
- udelay(IXGBE_I2C_T_LOW);
- }
-
- ixgbe_i2c_start(hw);
-
- /* Put the i2c bus back to default state */
- ixgbe_i2c_stop(hw);
-}
-
-/**
- * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
- * @hw: pointer to hardware structure
- *
- * Checks if the LASI temp alarm status was triggered due to overtemp
- **/
-s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw)
-{
- s32 status = 0;
- u16 phy_data = 0;
-
- if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM)
- goto out;
-
- /* Check that the LASI temp alarm status was triggered */
- hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG,
- MDIO_MMD_PMAPMD, &phy_data);
-
- if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
- goto out;
-
- status = IXGBE_ERR_OVERTEMP;
-out:
- return status;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_PHY_H_
-#define _IXGBE_PHY_H_
-
-#include "ixgbe_type.h"
-#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
-
-/* EEPROM byte offsets */
-#define IXGBE_SFF_IDENTIFIER 0x0
-#define IXGBE_SFF_IDENTIFIER_SFP 0x3
-#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
-#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
-#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
-#define IXGBE_SFF_1GBE_COMP_CODES 0x6
-#define IXGBE_SFF_10GBE_COMP_CODES 0x3
-#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
-#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C
-
-/* Bitmasks */
-#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
-#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8
-#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4
-#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
-#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
-#define IXGBE_SFF_1GBASET_CAPABLE 0x8
-#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
-#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
-#define IXGBE_I2C_EEPROM_READ_MASK 0x100
-#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
-#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
-#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
-#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
-#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
-
-/* Flow control defines */
-#define IXGBE_TAF_SYM_PAUSE 0x400
-#define IXGBE_TAF_ASM_PAUSE 0x800
-
-/* Bit-shift macros */
-#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
-#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
-#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
-
-/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
-#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
-#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
-#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
-#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
-
-/* I2C SDA and SCL timing parameters for standard mode */
-#define IXGBE_I2C_T_HD_STA 4
-#define IXGBE_I2C_T_LOW 5
-#define IXGBE_I2C_T_HIGH 4
-#define IXGBE_I2C_T_SU_STA 5
-#define IXGBE_I2C_T_HD_DATA 5
-#define IXGBE_I2C_T_SU_DATA 1
-#define IXGBE_I2C_T_RISE 1
-#define IXGBE_I2C_T_FALL 1
-#define IXGBE_I2C_T_SU_STO 4
-#define IXGBE_I2C_T_BUF 5
-
-#define IXGBE_TN_LASI_STATUS_REG 0x9005
-#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008
-
-s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
-s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
-s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
-s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data);
-s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 phy_data);
-s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
-s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed speed,
- bool autoneg,
- bool autoneg_wait_to_complete);
-s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg);
-
-/* PHY specific */
-s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *link_up);
-s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw);
-s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
- u16 *firmware_version);
-s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
- u16 *firmware_version);
-
-s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
-s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
-s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
- u16 *list_offset,
- u16 *data_offset);
-s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw);
-s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 *data);
-s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 data);
-s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 *eeprom_data);
-s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 eeprom_data);
-#endif /* _IXGBE_PHY_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/string.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/ipv6.h>
-#ifdef NETIF_F_HW_VLAN_TX
-#include <linux/if_vlan.h>
-#endif
-
-#include "ixgbe.h"
-
-#include "ixgbe_sriov.h"
-
-static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter,
- int entries, u16 *hash_list, u32 vf)
-{
- struct vf_data_storage *vfinfo = &adapter->vfinfo[vf];
- struct ixgbe_hw *hw = &adapter->hw;
- int i;
- u32 vector_bit;
- u32 vector_reg;
- u32 mta_reg;
-
- /* only so many hash values supported */
- entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES);
-
- /*
- * salt away the number of multi cast addresses assigned
- * to this VF for later use to restore when the PF multi cast
- * list changes
- */
- vfinfo->num_vf_mc_hashes = entries;
-
- /*
- * VFs are limited to using the MTA hash table for their multicast
- * addresses
- */
- for (i = 0; i < entries; i++) {
- vfinfo->vf_mc_hashes[i] = hash_list[i];
- }
-
- for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) {
- vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F;
- vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F;
- mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
- mta_reg |= (1 << vector_bit);
- IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
- }
-
- return 0;
-}
-
-static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct list_head *pos;
- struct vf_macvlans *entry;
-
- list_for_each(pos, &adapter->vf_mvs.l) {
- entry = list_entry(pos, struct vf_macvlans, l);
- if (entry->free == false)
- hw->mac.ops.set_rar(hw, entry->rar_entry,
- entry->vf_macvlan,
- entry->vf, IXGBE_RAH_AV);
- }
-}
-
-void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct vf_data_storage *vfinfo;
- int i, j;
- u32 vector_bit;
- u32 vector_reg;
- u32 mta_reg;
-
- for (i = 0; i < adapter->num_vfs; i++) {
- vfinfo = &adapter->vfinfo[i];
- for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) {
- hw->addr_ctrl.mta_in_use++;
- vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F;
- vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F;
- mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
- mta_reg |= (1 << vector_bit);
- IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
- }
- }
-
- /* Restore any VF macvlans */
- ixgbe_restore_vf_macvlans(adapter);
-}
-
-static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid,
- u32 vf)
-{
- return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add);
-}
-
-static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int new_mtu = msgbuf[1];
- u32 max_frs;
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
-
- /* Only X540 supports jumbo frames in IOV mode */
- if (adapter->hw.mac.type != ixgbe_mac_X540)
- return;
-
- /* MTU < 68 is an error and causes problems on some kernels */
- if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) {
- e_err(drv, "VF mtu %d out of range\n", new_mtu);
- return;
- }
-
- max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) &
- IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT;
- if (max_frs < new_mtu) {
- max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT;
- IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs);
- }
-
- e_info(hw, "VF requests change max MTU to %d\n", new_mtu);
-}
-
-static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe)
-{
- u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf));
- vmolr |= (IXGBE_VMOLR_ROMPE |
- IXGBE_VMOLR_BAM);
- if (aupe)
- vmolr |= IXGBE_VMOLR_AUPE;
- else
- vmolr &= ~IXGBE_VMOLR_AUPE;
- IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr);
-}
-
-static void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, u32 vid, u32 vf)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- if (vid)
- IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf),
- (vid | IXGBE_VMVIR_VLANA_DEFAULT));
- else
- IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0);
-}
-
-static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int rar_entry = hw->mac.num_rar_entries - (vf + 1);
-
- /* reset offloads to defaults */
- if (adapter->vfinfo[vf].pf_vlan) {
- ixgbe_set_vf_vlan(adapter, true,
- adapter->vfinfo[vf].pf_vlan, vf);
- ixgbe_set_vmvir(adapter,
- (adapter->vfinfo[vf].pf_vlan |
- (adapter->vfinfo[vf].pf_qos <<
- VLAN_PRIO_SHIFT)), vf);
- ixgbe_set_vmolr(hw, vf, false);
- } else {
- ixgbe_set_vmvir(adapter, 0, vf);
- ixgbe_set_vmolr(hw, vf, true);
- }
-
- /* reset multicast table array for vf */
- adapter->vfinfo[vf].num_vf_mc_hashes = 0;
-
- /* Flush and reset the mta with the new values */
- ixgbe_set_rx_mode(adapter->netdev);
-
- hw->mac.ops.clear_rar(hw, rar_entry);
-}
-
-static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
- int vf, unsigned char *mac_addr)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int rar_entry = hw->mac.num_rar_entries - (vf + 1);
-
- memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, 6);
- hw->mac.ops.set_rar(hw, rar_entry, mac_addr, vf, IXGBE_RAH_AV);
-
- return 0;
-}
-
-static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter,
- int vf, int index, unsigned char *mac_addr)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct list_head *pos;
- struct vf_macvlans *entry;
-
- if (index <= 1) {
- list_for_each(pos, &adapter->vf_mvs.l) {
- entry = list_entry(pos, struct vf_macvlans, l);
- if (entry->vf == vf) {
- entry->vf = -1;
- entry->free = true;
- entry->is_macvlan = false;
- hw->mac.ops.clear_rar(hw, entry->rar_entry);
- }
- }
- }
-
- /*
- * If index was zero then we were asked to clear the uc list
- * for the VF. We're done.
- */
- if (!index)
- return 0;
-
- entry = NULL;
-
- list_for_each(pos, &adapter->vf_mvs.l) {
- entry = list_entry(pos, struct vf_macvlans, l);
- if (entry->free)
- break;
- }
-
- /*
- * If we traversed the entire list and didn't find a free entry
- * then we're out of space on the RAR table. Also entry may
- * be NULL because the original memory allocation for the list
- * failed, which is not fatal but does mean we can't support
- * VF requests for MACVLAN because we couldn't allocate
- * memory for the list management required.
- */
- if (!entry || !entry->free)
- return -ENOSPC;
-
- entry->free = false;
- entry->is_macvlan = true;
- entry->vf = vf;
- memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN);
-
- hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV);
-
- return 0;
-}
-
-int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask)
-{
- unsigned char vf_mac_addr[6];
- struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
- unsigned int vfn = (event_mask & 0x3f);
-
- bool enable = ((event_mask & 0x10000000U) != 0);
-
- if (enable) {
- random_ether_addr(vf_mac_addr);
- e_info(probe, "IOV: VF %d is enabled MAC %pM\n",
- vfn, vf_mac_addr);
- /*
- * Store away the VF "permananet" MAC address, it will ask
- * for it later.
- */
- memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6);
- }
-
- return 0;
-}
-
-static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 reg;
- u32 reg_offset, vf_shift;
-
- vf_shift = vf % 32;
- reg_offset = vf / 32;
-
- /* enable transmit and receive for vf */
- reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset));
- reg |= (reg | (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg);
-
- reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset));
- reg |= (reg | (1 << vf_shift));
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg);
-
- /* Enable counting of spoofed packets in the SSVPC register */
- reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset));
- reg |= (1 << vf_shift);
- IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg);
-
- ixgbe_vf_reset_event(adapter, vf);
-}
-
-static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
-{
- u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
- u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
- struct ixgbe_hw *hw = &adapter->hw;
- s32 retval;
- int entries;
- u16 *hash_list;
- int add, vid, index;
- u8 *new_mac;
-
- retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
-
- if (retval)
- pr_err("Error receiving message from VF\n");
-
- /* this is a message we already processed, do nothing */
- if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK))
- return retval;
-
- /*
- * until the vf completes a virtual function reset it should not be
- * allowed to start any configuration.
- */
-
- if (msgbuf[0] == IXGBE_VF_RESET) {
- unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses;
- new_mac = (u8 *)(&msgbuf[1]);
- e_info(probe, "VF Reset msg received from vf %d\n", vf);
- adapter->vfinfo[vf].clear_to_send = false;
- ixgbe_vf_reset_msg(adapter, vf);
- adapter->vfinfo[vf].clear_to_send = true;
-
- if (is_valid_ether_addr(new_mac) &&
- !adapter->vfinfo[vf].pf_set_mac)
- ixgbe_set_vf_mac(adapter, vf, vf_mac);
- else
- ixgbe_set_vf_mac(adapter,
- vf, adapter->vfinfo[vf].vf_mac_addresses);
-
- /* reply to reset with ack and vf mac address */
- msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK;
- memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS);
- /*
- * Piggyback the multicast filter type so VF can compute the
- * correct vectors
- */
- msgbuf[3] = hw->mac.mc_filter_type;
- ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf);
-
- return retval;
- }
-
- if (!adapter->vfinfo[vf].clear_to_send) {
- msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
- ixgbe_write_mbx(hw, msgbuf, 1, vf);
- return retval;
- }
-
- switch ((msgbuf[0] & 0xFFFF)) {
- case IXGBE_VF_SET_MAC_ADDR:
- new_mac = ((u8 *)(&msgbuf[1]));
- if (is_valid_ether_addr(new_mac) &&
- !adapter->vfinfo[vf].pf_set_mac) {
- ixgbe_set_vf_mac(adapter, vf, new_mac);
- } else if (memcmp(adapter->vfinfo[vf].vf_mac_addresses,
- new_mac, ETH_ALEN)) {
- e_warn(drv, "VF %d attempted to override "
- "administratively set MAC address\nReload "
- "the VF driver to resume operations\n", vf);
- retval = -1;
- }
- break;
- case IXGBE_VF_SET_MULTICAST:
- entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
- >> IXGBE_VT_MSGINFO_SHIFT;
- hash_list = (u16 *)&msgbuf[1];
- retval = ixgbe_set_vf_multicasts(adapter, entries,
- hash_list, vf);
- break;
- case IXGBE_VF_SET_LPE:
- ixgbe_set_vf_lpe(adapter, msgbuf);
- break;
- case IXGBE_VF_SET_VLAN:
- add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK)
- >> IXGBE_VT_MSGINFO_SHIFT;
- vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK);
- if (adapter->vfinfo[vf].pf_vlan) {
- e_warn(drv, "VF %d attempted to override "
- "administratively set VLAN configuration\n"
- "Reload the VF driver to resume operations\n",
- vf);
- retval = -1;
- } else {
- retval = ixgbe_set_vf_vlan(adapter, add, vid, vf);
- }
- break;
- case IXGBE_VF_SET_MACVLAN:
- index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >>
- IXGBE_VT_MSGINFO_SHIFT;
- /*
- * If the VF is allowed to set MAC filters then turn off
- * anti-spoofing to avoid false positives. An index
- * greater than 0 will indicate the VF is setting a
- * macvlan MAC filter.
- */
- if (index > 0 && adapter->antispoofing_enabled) {
- hw->mac.ops.set_mac_anti_spoofing(hw, false,
- adapter->num_vfs);
- hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
- adapter->antispoofing_enabled = false;
- }
- retval = ixgbe_set_vf_macvlan(adapter, vf, index,
- (unsigned char *)(&msgbuf[1]));
- break;
- default:
- e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
- retval = IXGBE_ERR_MBX;
- break;
- }
-
- /* notify the VF of the results of what it sent us */
- if (retval)
- msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
- else
- msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK;
-
- msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
-
- ixgbe_write_mbx(hw, msgbuf, 1, vf);
-
- return retval;
-}
-
-static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 msg = IXGBE_VT_MSGTYPE_NACK;
-
- /* if device isn't clear to send it shouldn't be reading either */
- if (!adapter->vfinfo[vf].clear_to_send)
- ixgbe_write_mbx(hw, &msg, 1, vf);
-}
-
-void ixgbe_msg_task(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 vf;
-
- for (vf = 0; vf < adapter->num_vfs; vf++) {
- /* process any reset requests */
- if (!ixgbe_check_for_rst(hw, vf))
- ixgbe_vf_reset_event(adapter, vf);
-
- /* process any messages pending */
- if (!ixgbe_check_for_msg(hw, vf))
- ixgbe_rcv_msg_from_vf(adapter, vf);
-
- /* process any acks */
- if (!ixgbe_check_for_ack(hw, vf))
- ixgbe_rcv_ack_from_vf(adapter, vf);
- }
-}
-
-void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* disable transmit and receive for all vfs */
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0);
-
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0);
-}
-
-void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 ping;
- int i;
-
- for (i = 0 ; i < adapter->num_vfs; i++) {
- ping = IXGBE_PF_CONTROL_MSG;
- if (adapter->vfinfo[i].clear_to_send)
- ping |= IXGBE_VT_MSGTYPE_CTS;
- ixgbe_write_mbx(hw, &ping, 1, i);
- }
-}
-
-int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs))
- return -EINVAL;
- adapter->vfinfo[vf].pf_set_mac = true;
- dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf);
- dev_info(&adapter->pdev->dev, "Reload the VF driver to make this"
- " change effective.");
- if (test_bit(__IXGBE_DOWN, &adapter->state)) {
- dev_warn(&adapter->pdev->dev, "The VF MAC address has been set,"
- " but the PF device is not up.\n");
- dev_warn(&adapter->pdev->dev, "Bring the PF device up before"
- " attempting to use the VF device.\n");
- }
- return ixgbe_set_vf_mac(adapter, vf, mac);
-}
-
-int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos)
-{
- int err = 0;
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7))
- return -EINVAL;
- if (vlan || qos) {
- err = ixgbe_set_vf_vlan(adapter, true, vlan, vf);
- if (err)
- goto out;
- ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf);
- ixgbe_set_vmolr(hw, vf, false);
- if (adapter->antispoofing_enabled)
- hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf);
- adapter->vfinfo[vf].pf_vlan = vlan;
- adapter->vfinfo[vf].pf_qos = qos;
- dev_info(&adapter->pdev->dev,
- "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf);
- if (test_bit(__IXGBE_DOWN, &adapter->state)) {
- dev_warn(&adapter->pdev->dev,
- "The VF VLAN has been set,"
- " but the PF device is not up.\n");
- dev_warn(&adapter->pdev->dev,
- "Bring the PF device up before"
- " attempting to use the VF device.\n");
- }
- } else {
- err = ixgbe_set_vf_vlan(adapter, false,
- adapter->vfinfo[vf].pf_vlan, vf);
- ixgbe_set_vmvir(adapter, vlan, vf);
- ixgbe_set_vmolr(hw, vf, true);
- hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf);
- adapter->vfinfo[vf].pf_vlan = 0;
- adapter->vfinfo[vf].pf_qos = 0;
- }
-out:
- return err;
-}
-
-static int ixgbe_link_mbps(int internal_link_speed)
-{
- switch (internal_link_speed) {
- case IXGBE_LINK_SPEED_100_FULL:
- return 100;
- case IXGBE_LINK_SPEED_1GB_FULL:
- return 1000;
- case IXGBE_LINK_SPEED_10GB_FULL:
- return 10000;
- default:
- return 0;
- }
-}
-
-static void ixgbe_set_vf_rate_limit(struct ixgbe_hw *hw, int vf, int tx_rate,
- int link_speed)
-{
- int rf_dec, rf_int;
- u32 bcnrc_val;
-
- if (tx_rate != 0) {
- /* Calculate the rate factor values to set */
- rf_int = link_speed / tx_rate;
- rf_dec = (link_speed - (rf_int * tx_rate));
- rf_dec = (rf_dec * (1<<IXGBE_RTTBCNRC_RF_INT_SHIFT)) / tx_rate;
-
- bcnrc_val = IXGBE_RTTBCNRC_RS_ENA;
- bcnrc_val |= ((rf_int<<IXGBE_RTTBCNRC_RF_INT_SHIFT) &
- IXGBE_RTTBCNRC_RF_INT_MASK);
- bcnrc_val |= (rf_dec & IXGBE_RTTBCNRC_RF_DEC_MASK);
- } else {
- bcnrc_val = 0;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, 2*vf); /* vf Y uses queue 2*Y */
- /*
- * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
- * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported
- * and 0x004 otherwise.
- */
- switch (hw->mac.type) {
- case ixgbe_mac_82599EB:
- IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4);
- break;
- case ixgbe_mac_X540:
- IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14);
- break;
- default:
- break;
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val);
-}
-
-void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter)
-{
- int actual_link_speed, i;
- bool reset_rate = false;
-
- /* VF Tx rate limit was not set */
- if (adapter->vf_rate_link_speed == 0)
- return;
-
- actual_link_speed = ixgbe_link_mbps(adapter->link_speed);
- if (actual_link_speed != adapter->vf_rate_link_speed) {
- reset_rate = true;
- adapter->vf_rate_link_speed = 0;
- dev_info(&adapter->pdev->dev,
- "Link speed has been changed. VF Transmit rate "
- "is disabled\n");
- }
-
- for (i = 0; i < adapter->num_vfs; i++) {
- if (reset_rate)
- adapter->vfinfo[i].tx_rate = 0;
-
- ixgbe_set_vf_rate_limit(&adapter->hw, i,
- adapter->vfinfo[i].tx_rate,
- actual_link_speed);
- }
-}
-
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int actual_link_speed;
-
- actual_link_speed = ixgbe_link_mbps(adapter->link_speed);
- if ((vf >= adapter->num_vfs) || (!adapter->link_up) ||
- (tx_rate > actual_link_speed) || (actual_link_speed != 10000) ||
- ((tx_rate != 0) && (tx_rate <= 10)))
- /* rate limit cannot be set to 10Mb or less in 10Gb adapters */
- return -EINVAL;
-
- adapter->vf_rate_link_speed = actual_link_speed;
- adapter->vfinfo[vf].tx_rate = (u16)tx_rate;
- ixgbe_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed);
-
- return 0;
-}
-
-int ixgbe_ndo_get_vf_config(struct net_device *netdev,
- int vf, struct ifla_vf_info *ivi)
-{
- struct ixgbe_adapter *adapter = netdev_priv(netdev);
- if (vf >= adapter->num_vfs)
- return -EINVAL;
- ivi->vf = vf;
- memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN);
- ivi->tx_rate = adapter->vfinfo[vf].tx_rate;
- ivi->vlan = adapter->vfinfo[vf].pf_vlan;
- ivi->qos = adapter->vfinfo[vf].pf_qos;
- return 0;
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_SRIOV_H_
-#define _IXGBE_SRIOV_H_
-
-void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter);
-void ixgbe_msg_task(struct ixgbe_adapter *adapter);
-int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask);
-void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter);
-void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter);
-void ixgbe_dump_registers(struct ixgbe_adapter *adapter);
-int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac);
-int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan,
- u8 qos);
-int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate);
-int ixgbe_ndo_get_vf_config(struct net_device *netdev,
- int vf, struct ifla_vf_info *ivi);
-void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter);
-
-#endif /* _IXGBE_SRIOV_H_ */
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_TYPE_H_
-#define _IXGBE_TYPE_H_
-
-#include <linux/types.h>
-#include <linux/mdio.h>
-#include <linux/netdevice.h>
-
-/* Vendor ID */
-#define IXGBE_INTEL_VENDOR_ID 0x8086
-
-/* Device IDs */
-#define IXGBE_DEV_ID_82598 0x10B6
-#define IXGBE_DEV_ID_82598_BX 0x1508
-#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
-#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
-#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
-#define IXGBE_DEV_ID_82598AT 0x10C8
-#define IXGBE_DEV_ID_82598AT2 0x150B
-#define IXGBE_DEV_ID_82598EB_CX4 0x10DD
-#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC
-#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1
-#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1
-#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4
-#define IXGBE_DEV_ID_82599_KX4 0x10F7
-#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514
-#define IXGBE_DEV_ID_82599_KR 0x1517
-#define IXGBE_DEV_ID_82599_T3_LOM 0x151C
-#define IXGBE_DEV_ID_82599_CX4 0x10F9
-#define IXGBE_DEV_ID_82599_SFP 0x10FB
-#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152a
-#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529
-#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9
-#define IXGBE_DEV_ID_82599_SFP_EM 0x1507
-#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D
-#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC
-#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
-#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C
-#define IXGBE_DEV_ID_82599_LS 0x154F
-#define IXGBE_DEV_ID_X540T 0x1528
-
-/* General Registers */
-#define IXGBE_CTRL 0x00000
-#define IXGBE_STATUS 0x00008
-#define IXGBE_CTRL_EXT 0x00018
-#define IXGBE_ESDP 0x00020
-#define IXGBE_EODSDP 0x00028
-#define IXGBE_I2CCTL 0x00028
-#define IXGBE_LEDCTL 0x00200
-#define IXGBE_FRTIMER 0x00048
-#define IXGBE_TCPTIMER 0x0004C
-#define IXGBE_CORESPARE 0x00600
-#define IXGBE_EXVET 0x05078
-
-/* NVM Registers */
-#define IXGBE_EEC 0x10010
-#define IXGBE_EERD 0x10014
-#define IXGBE_EEWR 0x10018
-#define IXGBE_FLA 0x1001C
-#define IXGBE_EEMNGCTL 0x10110
-#define IXGBE_EEMNGDATA 0x10114
-#define IXGBE_FLMNGCTL 0x10118
-#define IXGBE_FLMNGDATA 0x1011C
-#define IXGBE_FLMNGCNT 0x10120
-#define IXGBE_FLOP 0x1013C
-#define IXGBE_GRC 0x10200
-
-/* General Receive Control */
-#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */
-#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */
-
-#define IXGBE_VPDDIAG0 0x10204
-#define IXGBE_VPDDIAG1 0x10208
-
-/* I2CCTL Bit Masks */
-#define IXGBE_I2C_CLK_IN 0x00000001
-#define IXGBE_I2C_CLK_OUT 0x00000002
-#define IXGBE_I2C_DATA_IN 0x00000004
-#define IXGBE_I2C_DATA_OUT 0x00000008
-
-/* Interrupt Registers */
-#define IXGBE_EICR 0x00800
-#define IXGBE_EICS 0x00808
-#define IXGBE_EIMS 0x00880
-#define IXGBE_EIMC 0x00888
-#define IXGBE_EIAC 0x00810
-#define IXGBE_EIAM 0x00890
-#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4)
-#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4)
-#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4)
-#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4)
-/*
- * 82598 EITR is 16 bits but set the limits based on the max
- * supported by all ixgbe hardware. 82599 EITR is only 12 bits,
- * with the lower 3 always zero.
- */
-#define IXGBE_MAX_INT_RATE 488281
-#define IXGBE_MIN_INT_RATE 956
-#define IXGBE_MAX_EITR 0x00000FF8
-#define IXGBE_MIN_EITR 8
-#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \
- (0x012300 + (((_i) - 24) * 4)))
-#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8
-#define IXGBE_EITR_LLI_MOD 0x00008000
-#define IXGBE_EITR_CNT_WDIS 0x80000000
-#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
-#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */
-#define IXGBE_EITRSEL 0x00894
-#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */
-#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */
-#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4)))
-#define IXGBE_GPIE 0x00898
-
-/* Flow Control Registers */
-#define IXGBE_FCADBUL 0x03210
-#define IXGBE_FCADBUH 0x03214
-#define IXGBE_FCAMACL 0x04328
-#define IXGBE_FCAMACH 0x0432C
-#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_PFCTOP 0x03008
-#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
-#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
-#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
-#define IXGBE_FCRTV 0x032A0
-#define IXGBE_FCCFG 0x03D00
-#define IXGBE_TFCS 0x0CE00
-
-/* Receive DMA Registers */
-#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \
- (0x0D000 + ((_i - 64) * 0x40)))
-#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \
- (0x0D004 + ((_i - 64) * 0x40)))
-#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \
- (0x0D008 + ((_i - 64) * 0x40)))
-#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \
- (0x0D010 + ((_i - 64) * 0x40)))
-#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \
- (0x0D018 + ((_i - 64) * 0x40)))
-#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \
- (0x0D028 + ((_i - 64) * 0x40)))
-#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \
- (0x0D02C + ((_i - 64) * 0x40)))
-#define IXGBE_RSCDBU 0x03028
-#define IXGBE_RDDCC 0x02F20
-#define IXGBE_RXMEMWRAP 0x03190
-#define IXGBE_STARCTRL 0x03024
-/*
- * Split and Replication Receive Control Registers
- * 00-15 : 0x02100 + n*4
- * 16-64 : 0x01014 + n*0x40
- * 64-127: 0x0D014 + (n-64)*0x40
- */
-#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \
- (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \
- (0x0D014 + ((_i - 64) * 0x40))))
-/*
- * Rx DCA Control Register:
- * 00-15 : 0x02200 + n*4
- * 16-64 : 0x0100C + n*0x40
- * 64-127: 0x0D00C + (n-64)*0x40
- */
-#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \
- (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \
- (0x0D00C + ((_i - 64) * 0x40))))
-#define IXGBE_RDRXCTL 0x02F00
-#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4))
- /* 8 of these 0x03C00 - 0x03C1C */
-#define IXGBE_RXCTRL 0x03000
-#define IXGBE_DROPEN 0x03D04
-#define IXGBE_RXPBSIZE_SHIFT 10
-
-/* Receive Registers */
-#define IXGBE_RXCSUM 0x05000
-#define IXGBE_RFCTL 0x05008
-#define IXGBE_DRECCCTL 0x02F08
-#define IXGBE_DRECCCTL_DISABLE 0
-/* Multicast Table Array - 128 entries */
-#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4))
-#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
- (0x0A200 + ((_i) * 8)))
-#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
- (0x0A204 + ((_i) * 8)))
-#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8))
-#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8))
-/* Packet split receive type */
-#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \
- (0x0EA00 + ((_i) * 4)))
-/* array of 4096 1-bit vlan filters */
-#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4))
-/*array of 4096 4-bit vlan vmdq indices */
-#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
-#define IXGBE_FCTRL 0x05080
-#define IXGBE_VLNCTRL 0x05088
-#define IXGBE_MCSTCTRL 0x05090
-#define IXGBE_MRQC 0x05818
-#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */
-#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */
-#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */
-#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */
-#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */
-#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */
-#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */
-#define IXGBE_RQTC 0x0EC70
-#define IXGBE_MTQC 0x08120
-#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */
-#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */
-#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */
-#define IXGBE_VT_CTL 0x051B0
-#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */
-#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
-#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */
-#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */
-#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4))
-#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4))
-#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4))
-#define IXGBE_QDE 0x2F04
-#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */
-#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */
-#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4))
-#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4))
-#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4))
-#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4))
-#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/
-#define IXGBE_RXFECCERR0 0x051B8
-#define IXGBE_LLITHRESH 0x0EC90
-#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_IMIRVP 0x05AC0
-#define IXGBE_VMD_CTL 0x0581C
-#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */
-#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */
-
-/* Flow Director registers */
-#define IXGBE_FDIRCTRL 0x0EE00
-#define IXGBE_FDIRHKEY 0x0EE68
-#define IXGBE_FDIRSKEY 0x0EE6C
-#define IXGBE_FDIRDIP4M 0x0EE3C
-#define IXGBE_FDIRSIP4M 0x0EE40
-#define IXGBE_FDIRTCPM 0x0EE44
-#define IXGBE_FDIRUDPM 0x0EE48
-#define IXGBE_FDIRIP6M 0x0EE74
-#define IXGBE_FDIRM 0x0EE70
-
-/* Flow Director Stats registers */
-#define IXGBE_FDIRFREE 0x0EE38
-#define IXGBE_FDIRLEN 0x0EE4C
-#define IXGBE_FDIRUSTAT 0x0EE50
-#define IXGBE_FDIRFSTAT 0x0EE54
-#define IXGBE_FDIRMATCH 0x0EE58
-#define IXGBE_FDIRMISS 0x0EE5C
-
-/* Flow Director Programming registers */
-#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */
-#define IXGBE_FDIRIPSA 0x0EE18
-#define IXGBE_FDIRIPDA 0x0EE1C
-#define IXGBE_FDIRPORT 0x0EE20
-#define IXGBE_FDIRVLAN 0x0EE24
-#define IXGBE_FDIRHASH 0x0EE28
-#define IXGBE_FDIRCMD 0x0EE2C
-
-/* Transmit DMA registers */
-#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/
-#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
-#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
-#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40))
-#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40))
-#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40))
-#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
-#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
-#define IXGBE_DTXCTL 0x07E00
-
-#define IXGBE_DMATXCTL 0x04A80
-#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */
-#define IXGBE_PFDTXGSWC 0x08220
-#define IXGBE_DTXMXSZRQ 0x08100
-#define IXGBE_DTXTCPFLGL 0x04A88
-#define IXGBE_DTXTCPFLGH 0x04A8C
-#define IXGBE_LBDRPEN 0x0CA00
-#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */
-
-#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */
-#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */
-#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */
-#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */
-
-#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */
-
-/* Anti-spoofing defines */
-#define IXGBE_SPOOF_MACAS_MASK 0xFF
-#define IXGBE_SPOOF_VLANAS_MASK 0xFF00
-#define IXGBE_SPOOF_VLANAS_SHIFT 8
-#define IXGBE_PFVFSPOOF_REG_COUNT 8
-
-#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */
-/* Tx DCA Control register : 128 of these (0-127) */
-#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40))
-#define IXGBE_TIPG 0x0CB00
-#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */
-#define IXGBE_MNGTXMAP 0x0CD10
-#define IXGBE_TIPG_FIBER_DEFAULT 3
-#define IXGBE_TXPBSIZE_SHIFT 10
-
-/* Wake up registers */
-#define IXGBE_WUC 0x05800
-#define IXGBE_WUFC 0x05808
-#define IXGBE_WUS 0x05810
-#define IXGBE_IPAV 0x05838
-#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */
-#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */
-
-#define IXGBE_WUPL 0x05900
-#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
-#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */
-#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) /* Ext Flexible Host
- * Filter Table */
-
-#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4
-#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2
-
-/* Each Flexible Filter is at most 128 (0x80) bytes in length */
-#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128
-#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */
-#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */
-
-/* Definitions for power management and wakeup registers */
-/* Wake Up Control */
-#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */
-#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */
-#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */
-
-/* Wake Up Filter Control */
-#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */
-#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */
-#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */
-#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */
-#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */
-#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */
-#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */
-#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */
-#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */
-
-#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */
-#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */
-#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */
-#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */
-#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */
-#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */
-#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */
-#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */
-#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */
-#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */
-#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */
-
-/* Wake Up Status */
-#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC
-#define IXGBE_WUS_MAG IXGBE_WUFC_MAG
-#define IXGBE_WUS_EX IXGBE_WUFC_EX
-#define IXGBE_WUS_MC IXGBE_WUFC_MC
-#define IXGBE_WUS_BC IXGBE_WUFC_BC
-#define IXGBE_WUS_ARP IXGBE_WUFC_ARP
-#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4
-#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6
-#define IXGBE_WUS_MNG IXGBE_WUFC_MNG
-#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0
-#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1
-#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2
-#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3
-#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4
-#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5
-#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS
-
-/* Wake Up Packet Length */
-#define IXGBE_WUPL_LENGTH_MASK 0xFFFF
-
-/* DCB registers */
-#define IXGBE_RMCS 0x03D00
-#define IXGBE_DPMCS 0x07F40
-#define IXGBE_PDPMCS 0x0CD00
-#define IXGBE_RUPPBMR 0x050A0
-#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
-#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
-#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
-
-
-/* Security Control Registers */
-#define IXGBE_SECTXCTRL 0x08800
-#define IXGBE_SECTXSTAT 0x08804
-#define IXGBE_SECTXBUFFAF 0x08808
-#define IXGBE_SECTXMINIFG 0x08810
-#define IXGBE_SECRXCTRL 0x08D00
-#define IXGBE_SECRXSTAT 0x08D04
-
-/* Security Bit Fields and Masks */
-#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001
-#define IXGBE_SECTXCTRL_TX_DIS 0x00000002
-#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004
-
-#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001
-#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002
-
-#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001
-#define IXGBE_SECRXCTRL_RX_DIS 0x00000002
-
-#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001
-#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002
-
-/* LinkSec (MacSec) Registers */
-#define IXGBE_LSECTXCAP 0x08A00
-#define IXGBE_LSECRXCAP 0x08F00
-#define IXGBE_LSECTXCTRL 0x08A04
-#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */
-#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */
-#define IXGBE_LSECTXSA 0x08A10
-#define IXGBE_LSECTXPN0 0x08A14
-#define IXGBE_LSECTXPN1 0x08A18
-#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */
-#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */
-#define IXGBE_LSECRXCTRL 0x08F04
-#define IXGBE_LSECRXSCL 0x08F08
-#define IXGBE_LSECRXSCH 0x08F0C
-#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */
-#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */
-#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m))))
-#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */
-#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */
-#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */
-#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */
-#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */
-#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */
-#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */
-#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */
-#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */
-#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */
-#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */
-#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */
-#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */
-#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */
-#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */
-#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */
-#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */
-#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */
-#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */
-
-/* LinkSec (MacSec) Bit Fields and Masks */
-#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000
-#define IXGBE_LSECTXCAP_SUM_SHIFT 16
-#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000
-#define IXGBE_LSECRXCAP_SUM_SHIFT 16
-
-#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003
-#define IXGBE_LSECTXCTRL_DISABLE 0x0
-#define IXGBE_LSECTXCTRL_AUTH 0x1
-#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2
-#define IXGBE_LSECTXCTRL_AISCI 0x00000020
-#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00
-#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8
-
-#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C
-#define IXGBE_LSECRXCTRL_EN_SHIFT 2
-#define IXGBE_LSECRXCTRL_DISABLE 0x0
-#define IXGBE_LSECRXCTRL_CHECK 0x1
-#define IXGBE_LSECRXCTRL_STRICT 0x2
-#define IXGBE_LSECRXCTRL_DROP 0x3
-#define IXGBE_LSECRXCTRL_PLSH 0x00000040
-#define IXGBE_LSECRXCTRL_RP 0x00000080
-#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33
-
-/* IpSec Registers */
-#define IXGBE_IPSTXIDX 0x08900
-#define IXGBE_IPSTXSALT 0x08904
-#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */
-#define IXGBE_IPSRXIDX 0x08E00
-#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */
-#define IXGBE_IPSRXSPI 0x08E14
-#define IXGBE_IPSRXIPIDX 0x08E18
-#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */
-#define IXGBE_IPSRXSALT 0x08E2C
-#define IXGBE_IPSRXMOD 0x08E30
-
-#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4
-
-/* DCB registers */
-#define IXGBE_RTRPCS 0x02430
-#define IXGBE_RTTDCS 0x04900
-#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */
-#define IXGBE_RTTPCS 0x0CD00
-#define IXGBE_RTRUP2TC 0x03020
-#define IXGBE_RTTUP2TC 0x0C800
-#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */
-#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_RTTDQSEL 0x04904
-#define IXGBE_RTTDT1C 0x04908
-#define IXGBE_RTTDT1S 0x0490C
-#define IXGBE_RTTDTECC 0x04990
-#define IXGBE_RTTDTECC_NO_BCN 0x00000100
-#define IXGBE_RTTBCNRC 0x04984
-#define IXGBE_RTTBCNRC_RS_ENA 0x80000000
-#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF
-#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14
-#define IXGBE_RTTBCNRC_RF_INT_MASK \
- (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT)
-#define IXGBE_RTTBCNRM 0x04980
-
-/* FCoE DMA Context Registers */
-#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */
-#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */
-#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */
-#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */
-#define IXGBE_FCINVST0 0x03FC0 /* FC Invalid DMA Context Status Reg 0 */
-#define IXGBE_FCINVST(_i) (IXGBE_FCINVST0 + ((_i) * 4))
-#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */
-#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */
-#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */
-#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */
-#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */
-#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3
-#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8
-#define IXGBE_FCBUFF_OFFSET_SHIFT 16
-#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */
-#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */
-#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */
-#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */
-#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16
-
-/* FCoE SOF/EOF */
-#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */
-#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */
-#define IXGBE_REOFF 0x05158 /* Rx FC EOF */
-#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */
-/* FCoE Filter Context Registers */
-#define IXGBE_FCFLT 0x05108 /* FC FLT Context */
-#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */
-#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */
-#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */
-#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */
-#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */
-#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */
-#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */
-#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */
-#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */
-/* FCoE Receive Control */
-#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */
-#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */
-#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */
-#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */
-#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */
-#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */
-#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */
-#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */
-#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */
-#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */
-#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8
-/* FCoE Redirection */
-#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */
-#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */
-#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */
-#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */
-#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */
-#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */
-
-/* Stats registers */
-#define IXGBE_CRCERRS 0x04000
-#define IXGBE_ILLERRC 0x04004
-#define IXGBE_ERRBC 0x04008
-#define IXGBE_MSPDC 0x04010
-#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
-#define IXGBE_MLFC 0x04034
-#define IXGBE_MRFC 0x04038
-#define IXGBE_RLEC 0x04040
-#define IXGBE_LXONTXC 0x03F60
-#define IXGBE_LXONRXC 0x0CF60
-#define IXGBE_LXOFFTXC 0x03F68
-#define IXGBE_LXOFFRXC 0x0CF68
-#define IXGBE_LXONRXCNT 0x041A4
-#define IXGBE_LXOFFRXCNT 0x041A8
-#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */
-#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */
-#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */
-#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
-#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
-#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
-#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
-#define IXGBE_PRC64 0x0405C
-#define IXGBE_PRC127 0x04060
-#define IXGBE_PRC255 0x04064
-#define IXGBE_PRC511 0x04068
-#define IXGBE_PRC1023 0x0406C
-#define IXGBE_PRC1522 0x04070
-#define IXGBE_GPRC 0x04074
-#define IXGBE_BPRC 0x04078
-#define IXGBE_MPRC 0x0407C
-#define IXGBE_GPTC 0x04080
-#define IXGBE_GORCL 0x04088
-#define IXGBE_GORCH 0x0408C
-#define IXGBE_GOTCL 0x04090
-#define IXGBE_GOTCH 0x04094
-#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
-#define IXGBE_RUC 0x040A4
-#define IXGBE_RFC 0x040A8
-#define IXGBE_ROC 0x040AC
-#define IXGBE_RJC 0x040B0
-#define IXGBE_MNGPRC 0x040B4
-#define IXGBE_MNGPDC 0x040B8
-#define IXGBE_MNGPTC 0x0CF90
-#define IXGBE_TORL 0x040C0
-#define IXGBE_TORH 0x040C4
-#define IXGBE_TPR 0x040D0
-#define IXGBE_TPT 0x040D4
-#define IXGBE_PTC64 0x040D8
-#define IXGBE_PTC127 0x040DC
-#define IXGBE_PTC255 0x040E0
-#define IXGBE_PTC511 0x040E4
-#define IXGBE_PTC1023 0x040E8
-#define IXGBE_PTC1522 0x040EC
-#define IXGBE_MPTC 0x040F0
-#define IXGBE_BPTC 0x040F4
-#define IXGBE_XEC 0x04120
-#define IXGBE_SSVPC 0x08780
-
-#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4))
-#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \
- (0x08600 + ((_i) * 4)))
-#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4))
-
-#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */
-#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */
-#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */
-#define IXGBE_FCCRC 0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */
-#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */
-#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */
-#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */
-#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */
-#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */
-#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */
-#define IXGBE_O2BGPTC 0x041C4
-#define IXGBE_O2BSPC 0x087B0
-#define IXGBE_B2OSPC 0x041C0
-#define IXGBE_B2OGPRC 0x02F90
-#define IXGBE_PCRC8ECL 0x0E810
-#define IXGBE_PCRC8ECH 0x0E811
-#define IXGBE_PCRC8ECH_MASK 0x1F
-#define IXGBE_LDPCECL 0x0E820
-#define IXGBE_LDPCECH 0x0E821
-
-/* Management */
-#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_MANC 0x05820
-#define IXGBE_MFVAL 0x05824
-#define IXGBE_MANC2H 0x05860
-#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_MIPAF 0x058B0
-#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
-#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
-#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */
-#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */
-#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */
-#define IXGBE_LSWFW 0x15014
-
-/* ARC Subsystem registers */
-#define IXGBE_HICR 0x15F00
-#define IXGBE_FWSTS 0x15F0C
-#define IXGBE_HSMC0R 0x15F04
-#define IXGBE_HSMC1R 0x15F08
-#define IXGBE_SWSR 0x15F10
-#define IXGBE_HFDR 0x15FE8
-#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */
-
-#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */
-/* Driver sets this bit when done to put command in RAM */
-#define IXGBE_HICR_C 0x02
-#define IXGBE_HICR_SV 0x04 /* Status Validity */
-#define IXGBE_HICR_FW_RESET_ENABLE 0x40
-#define IXGBE_HICR_FW_RESET 0x80
-
-/* PCI-E registers */
-#define IXGBE_GCR 0x11000
-#define IXGBE_GTV 0x11004
-#define IXGBE_FUNCTAG 0x11008
-#define IXGBE_GLT 0x1100C
-#define IXGBE_GSCL_1 0x11010
-#define IXGBE_GSCL_2 0x11014
-#define IXGBE_GSCL_3 0x11018
-#define IXGBE_GSCL_4 0x1101C
-#define IXGBE_GSCN_0 0x11020
-#define IXGBE_GSCN_1 0x11024
-#define IXGBE_GSCN_2 0x11028
-#define IXGBE_GSCN_3 0x1102C
-#define IXGBE_FACTPS 0x10150
-#define IXGBE_PCIEANACTL 0x11040
-#define IXGBE_SWSM 0x10140
-#define IXGBE_FWSM 0x10148
-#define IXGBE_GSSR 0x10160
-#define IXGBE_MREVID 0x11064
-#define IXGBE_DCA_ID 0x11070
-#define IXGBE_DCA_CTRL 0x11074
-#define IXGBE_SWFW_SYNC IXGBE_GSSR
-
-/* PCIe registers 82599-specific */
-#define IXGBE_GCR_EXT 0x11050
-#define IXGBE_GSCL_5_82599 0x11030
-#define IXGBE_GSCL_6_82599 0x11034
-#define IXGBE_GSCL_7_82599 0x11038
-#define IXGBE_GSCL_8_82599 0x1103C
-#define IXGBE_PHYADR_82599 0x11040
-#define IXGBE_PHYDAT_82599 0x11044
-#define IXGBE_PHYCTL_82599 0x11048
-#define IXGBE_PBACLR_82599 0x11068
-#define IXGBE_CIAA_82599 0x11088
-#define IXGBE_CIAD_82599 0x1108C
-#define IXGBE_PICAUSE 0x110B0
-#define IXGBE_PIENA 0x110B8
-#define IXGBE_CDQ_MBR_82599 0x110B4
-#define IXGBE_PCIESPARE 0x110BC
-#define IXGBE_MISC_REG_82599 0x110F0
-#define IXGBE_ECC_CTRL_0_82599 0x11100
-#define IXGBE_ECC_CTRL_1_82599 0x11104
-#define IXGBE_ECC_STATUS_82599 0x110E0
-#define IXGBE_BAR_CTRL_82599 0x110F4
-
-/* PCI Express Control */
-#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000
-#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000
-#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000
-#define IXGBE_GCR_CAP_VER2 0x00040000
-
-#define IXGBE_GCR_EXT_MSIX_EN 0x80000000
-#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001
-#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002
-#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003
-#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \
- IXGBE_GCR_EXT_VT_MODE_64)
-
-/* Time Sync Registers */
-#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */
-#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */
-#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */
-#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */
-#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */
-#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */
-#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */
-#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */
-#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */
-#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */
-#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */
-#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */
-#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */
-#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */
-#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */
-#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */
-#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */
-#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */
-#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */
-#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */
-#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */
-#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */
-#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */
-#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */
-#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */
-
-/* Diagnostic Registers */
-#define IXGBE_RDSTATCTL 0x02C20
-#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
-#define IXGBE_RDHMPN 0x02F08
-#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4))
-#define IXGBE_RDPROBE 0x02F20
-#define IXGBE_RDMAM 0x02F30
-#define IXGBE_RDMAD 0x02F34
-#define IXGBE_TDSTATCTL 0x07C20
-#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
-#define IXGBE_TDHMPN 0x07F08
-#define IXGBE_TDHMPN2 0x082FC
-#define IXGBE_TXDESCIC 0x082CC
-#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4))
-#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4))
-#define IXGBE_TDPROBE 0x07F20
-#define IXGBE_TXBUFCTRL 0x0C600
-#define IXGBE_TXBUFDATA0 0x0C610
-#define IXGBE_TXBUFDATA1 0x0C614
-#define IXGBE_TXBUFDATA2 0x0C618
-#define IXGBE_TXBUFDATA3 0x0C61C
-#define IXGBE_RXBUFCTRL 0x03600
-#define IXGBE_RXBUFDATA0 0x03610
-#define IXGBE_RXBUFDATA1 0x03614
-#define IXGBE_RXBUFDATA2 0x03618
-#define IXGBE_RXBUFDATA3 0x0361C
-#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */
-#define IXGBE_RFVAL 0x050A4
-#define IXGBE_MDFTC1 0x042B8
-#define IXGBE_MDFTC2 0x042C0
-#define IXGBE_MDFTFIFO1 0x042C4
-#define IXGBE_MDFTFIFO2 0x042C8
-#define IXGBE_MDFTS 0x042CC
-#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
-#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
-#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
-#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
-#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
-#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
-#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
-#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
-#define IXGBE_PCIEECCCTL 0x1106C
-#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/
-#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/
-#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/
-#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/
-#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/
-#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/
-#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/
-#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/
-#define IXGBE_PCIEECCCTL0 0x11100
-#define IXGBE_PCIEECCCTL1 0x11104
-#define IXGBE_RXDBUECC 0x03F70
-#define IXGBE_TXDBUECC 0x0CF70
-#define IXGBE_RXDBUEST 0x03F74
-#define IXGBE_TXDBUEST 0x0CF74
-#define IXGBE_PBTXECC 0x0C300
-#define IXGBE_PBRXECC 0x03300
-#define IXGBE_GHECCR 0x110B0
-
-/* MAC Registers */
-#define IXGBE_PCS1GCFIG 0x04200
-#define IXGBE_PCS1GLCTL 0x04208
-#define IXGBE_PCS1GLSTA 0x0420C
-#define IXGBE_PCS1GDBG0 0x04210
-#define IXGBE_PCS1GDBG1 0x04214
-#define IXGBE_PCS1GANA 0x04218
-#define IXGBE_PCS1GANLP 0x0421C
-#define IXGBE_PCS1GANNP 0x04220
-#define IXGBE_PCS1GANLPNP 0x04224
-#define IXGBE_HLREG0 0x04240
-#define IXGBE_HLREG1 0x04244
-#define IXGBE_PAP 0x04248
-#define IXGBE_MACA 0x0424C
-#define IXGBE_APAE 0x04250
-#define IXGBE_ARD 0x04254
-#define IXGBE_AIS 0x04258
-#define IXGBE_MSCA 0x0425C
-#define IXGBE_MSRWD 0x04260
-#define IXGBE_MLADD 0x04264
-#define IXGBE_MHADD 0x04268
-#define IXGBE_MAXFRS 0x04268
-#define IXGBE_TREG 0x0426C
-#define IXGBE_PCSS1 0x04288
-#define IXGBE_PCSS2 0x0428C
-#define IXGBE_XPCSS 0x04290
-#define IXGBE_MFLCN 0x04294
-#define IXGBE_SERDESC 0x04298
-#define IXGBE_MACS 0x0429C
-#define IXGBE_AUTOC 0x042A0
-#define IXGBE_LINKS 0x042A4
-#define IXGBE_LINKS2 0x04324
-#define IXGBE_AUTOC2 0x042A8
-#define IXGBE_AUTOC3 0x042AC
-#define IXGBE_ANLP1 0x042B0
-#define IXGBE_ANLP2 0x042B4
-#define IXGBE_MACC 0x04330
-#define IXGBE_ATLASCTL 0x04800
-#define IXGBE_MMNGC 0x042D0
-#define IXGBE_ANLPNP1 0x042D4
-#define IXGBE_ANLPNP2 0x042D8
-#define IXGBE_KRPCSFC 0x042E0
-#define IXGBE_KRPCSS 0x042E4
-#define IXGBE_FECS1 0x042E8
-#define IXGBE_FECS2 0x042EC
-#define IXGBE_SMADARCTL 0x14F10
-#define IXGBE_MPVC 0x04318
-#define IXGBE_SGMIIC 0x04314
-
-/* Statistics Registers */
-#define IXGBE_RXNFGPC 0x041B0
-#define IXGBE_RXNFGBCL 0x041B4
-#define IXGBE_RXNFGBCH 0x041B8
-#define IXGBE_RXDGPC 0x02F50
-#define IXGBE_RXDGBCL 0x02F54
-#define IXGBE_RXDGBCH 0x02F58
-#define IXGBE_RXDDGPC 0x02F5C
-#define IXGBE_RXDDGBCL 0x02F60
-#define IXGBE_RXDDGBCH 0x02F64
-#define IXGBE_RXLPBKGPC 0x02F68
-#define IXGBE_RXLPBKGBCL 0x02F6C
-#define IXGBE_RXLPBKGBCH 0x02F70
-#define IXGBE_RXDLPBKGPC 0x02F74
-#define IXGBE_RXDLPBKGBCL 0x02F78
-#define IXGBE_RXDLPBKGBCH 0x02F7C
-#define IXGBE_TXDGPC 0x087A0
-#define IXGBE_TXDGBCL 0x087A4
-#define IXGBE_TXDGBCH 0x087A8
-
-#define IXGBE_RXDSTATCTRL 0x02F40
-
-/* Copper Pond 2 link timeout */
-#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50
-
-/* Omer CORECTL */
-#define IXGBE_CORECTL 0x014F00
-/* BARCTRL */
-#define IXGBE_BARCTRL 0x110F4
-#define IXGBE_BARCTRL_FLSIZE 0x0700
-#define IXGBE_BARCTRL_FLSIZE_SHIFT 8
-#define IXGBE_BARCTRL_CSRSIZE 0x2000
-
-/* RSCCTL Bit Masks */
-#define IXGBE_RSCCTL_RSCEN 0x01
-#define IXGBE_RSCCTL_MAXDESC_1 0x00
-#define IXGBE_RSCCTL_MAXDESC_4 0x04
-#define IXGBE_RSCCTL_MAXDESC_8 0x08
-#define IXGBE_RSCCTL_MAXDESC_16 0x0C
-
-/* RSCDBU Bit Masks */
-#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F
-#define IXGBE_RSCDBU_RSCACKDIS 0x00000080
-
-/* RDRXCTL Bit Masks */
-#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */
-#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */
-#define IXGBE_RDRXCTL_MVMEN 0x00000020
-#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */
-#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */
-#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */
-#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disable RSC compl on LLI */
-#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC enabled */
-#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC enabled */
-
-/* RQTC Bit Masks and Shifts */
-#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4)
-#define IXGBE_RQTC_TC0_MASK (0x7 << 0)
-#define IXGBE_RQTC_TC1_MASK (0x7 << 4)
-#define IXGBE_RQTC_TC2_MASK (0x7 << 8)
-#define IXGBE_RQTC_TC3_MASK (0x7 << 12)
-#define IXGBE_RQTC_TC4_MASK (0x7 << 16)
-#define IXGBE_RQTC_TC5_MASK (0x7 << 20)
-#define IXGBE_RQTC_TC6_MASK (0x7 << 24)
-#define IXGBE_RQTC_TC7_MASK (0x7 << 28)
-
-/* PSRTYPE.RQPL Bit masks and shift */
-#define IXGBE_PSRTYPE_RQPL_MASK 0x7
-#define IXGBE_PSRTYPE_RQPL_SHIFT 29
-
-/* CTRL Bit Masks */
-#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */
-#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */
-#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */
-
-/* FACTPS */
-#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */
-
-/* MHADD Bit Masks */
-#define IXGBE_MHADD_MFS_MASK 0xFFFF0000
-#define IXGBE_MHADD_MFS_SHIFT 16
-
-/* Extended Device Control */
-#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */
-#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */
-#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */
-#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
-
-/* Direct Cache Access (DCA) definitions */
-#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */
-#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */
-
-#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */
-#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
-
-#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
-#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */
-#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */
-#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
-#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
-#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
-#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */
-#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */
-#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */
-
-#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
-#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */
-#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */
-#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
-#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */
-
-/* MSCA Bit Masks */
-#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Address (new protocol) */
-#define IXGBE_MSCA_NP_ADDR_SHIFT 0
-#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Device Type (new protocol) */
-#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old protocol */
-#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */
-#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/
-#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */
-#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */
-#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */
-#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (write) */
-#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (read) */
-#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (read, auto inc)*/
-#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */
-#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */
-#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new protocol) */
-#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old protocol) */
-#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */
-#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress enable */
-
-/* MSRWD bit masks */
-#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF
-#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
-#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000
-#define IXGBE_MSRWD_READ_DATA_SHIFT 16
-
-/* Atlas registers */
-#define IXGBE_ATLAS_PDN_LPBK 0x24
-#define IXGBE_ATLAS_PDN_10G 0xB
-#define IXGBE_ATLAS_PDN_1G 0xC
-#define IXGBE_ATLAS_PDN_AN 0xD
-
-/* Atlas bit masks */
-#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000
-#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10
-#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0
-#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0
-#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0
-
-/* Omer bit masks */
-#define IXGBE_CORECTL_WRITE_CMD 0x00010000
-
-/* MDIO definitions */
-
-#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */
-
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018
-#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010
-
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */
-#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */
-
-/* MII clause 22/28 definitions */
-#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */
-#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */
-#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/
-#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/
-#define IXGBE_MII_AUTONEG_REG 0x0
-
-#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0
-#define IXGBE_MAX_PHY_ADDR 32
-
-/* PHY IDs*/
-#define TN1010_PHY_ID 0x00A19410
-#define TNX_FW_REV 0xB
-#define X540_PHY_ID 0x01540200
-#define QT2022_PHY_ID 0x0043A400
-#define ATH_PHY_ID 0x03429050
-#define AQ_FW_REV 0x20
-
-/* PHY Types */
-#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0
-
-/* Special PHY Init Routine */
-#define IXGBE_PHY_INIT_OFFSET_NL 0x002B
-#define IXGBE_PHY_INIT_END_NL 0xFFFF
-#define IXGBE_CONTROL_MASK_NL 0xF000
-#define IXGBE_DATA_MASK_NL 0x0FFF
-#define IXGBE_CONTROL_SHIFT_NL 12
-#define IXGBE_DELAY_NL 0
-#define IXGBE_DATA_NL 1
-#define IXGBE_CONTROL_NL 0x000F
-#define IXGBE_CONTROL_EOL_NL 0x0FFF
-#define IXGBE_CONTROL_SOL_NL 0x0000
-
-/* General purpose Interrupt Enable */
-#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */
-#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */
-#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */
-#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */
-#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */
-#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */
-#define IXGBE_GPIE_EIAME 0x40000000
-#define IXGBE_GPIE_PBA_SUPPORT 0x80000000
-#define IXGBE_GPIE_RSC_DELAY_SHIFT 11
-#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */
-#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */
-#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */
-#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */
-
-/* Packet Buffer Initialization */
-#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */
-#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */
-#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */
-#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */
-#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */
-#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */
-#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer*/
-#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer*/
-
-#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */
-#define IXGBE_MAX_PB 8
-
-/* Packet buffer allocation strategies */
-enum {
- PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */
-#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL
- PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */
-#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED
-};
-
-/* Transmit Flow Control status */
-#define IXGBE_TFCS_TXOFF 0x00000001
-#define IXGBE_TFCS_TXOFF0 0x00000100
-#define IXGBE_TFCS_TXOFF1 0x00000200
-#define IXGBE_TFCS_TXOFF2 0x00000400
-#define IXGBE_TFCS_TXOFF3 0x00000800
-#define IXGBE_TFCS_TXOFF4 0x00001000
-#define IXGBE_TFCS_TXOFF5 0x00002000
-#define IXGBE_TFCS_TXOFF6 0x00004000
-#define IXGBE_TFCS_TXOFF7 0x00008000
-
-/* TCP Timer */
-#define IXGBE_TCPTIMER_KS 0x00000100
-#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200
-#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400
-#define IXGBE_TCPTIMER_LOOP 0x00000800
-#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF
-
-/* HLREG0 Bit Masks */
-#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */
-#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */
-#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */
-#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */
-#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */
-#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */
-#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */
-#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */
-#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */
-#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */
-#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */
-#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */
-#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */
-#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */
-#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */
-
-/* VMD_CTL bitmasks */
-#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001
-#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
-
-/* VT_CTL bitmasks */
-#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */
-#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */
-#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */
-#define IXGBE_VT_CTL_POOL_SHIFT 7
-#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT)
-
-/* VMOLR bitmasks */
-#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */
-#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */
-#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */
-#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */
-#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */
-
-/* VFRE bitmask */
-#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF
-
-#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
-
-/* RDHMPN and TDHMPN bitmasks */
-#define IXGBE_RDHMPN_RDICADDR 0x007FF800
-#define IXGBE_RDHMPN_RDICRDREQ 0x00800000
-#define IXGBE_RDHMPN_RDICADDR_SHIFT 11
-#define IXGBE_TDHMPN_TDICADDR 0x003FF800
-#define IXGBE_TDHMPN_TDICRDREQ 0x00800000
-#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
-
-#define IXGBE_RDMAM_MEM_SEL_SHIFT 13
-#define IXGBE_RDMAM_DWORD_SHIFT 9
-#define IXGBE_RDMAM_DESC_COMP_FIFO 1
-#define IXGBE_RDMAM_DFC_CMD_FIFO 2
-#define IXGBE_RDMAM_TCN_STATUS_RAM 4
-#define IXGBE_RDMAM_WB_COLL_FIFO 5
-#define IXGBE_RDMAM_QSC_CNT_RAM 6
-#define IXGBE_RDMAM_QSC_QUEUE_CNT 8
-#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA
-#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135
-#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4
-#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48
-#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7
-#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256
-#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9
-#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8
-#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4
-#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64
-#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4
-#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32
-#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4
-#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128
-#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8
-
-#define IXGBE_TXDESCIC_READY 0x80000000
-
-/* Receive Checksum Control */
-#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */
-#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */
-
-/* FCRTL Bit Masks */
-#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */
-#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */
-
-/* PAP bit masks*/
-#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */
-
-/* RMCS Bit Masks */
-#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recycle Mode enable */
-/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
-#define IXGBE_RMCS_RAC 0x00000004
-#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
-#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */
-#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */
-#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */
-
-/* FCCFG Bit Masks */
-#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */
-#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */
-
-/* Interrupt register bitmasks */
-
-/* Extended Interrupt Cause Read */
-#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
-#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */
-#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */
-#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */
-#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
-#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */
-#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */
-#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */
-#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */
-#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */
-#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */
-#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */
-#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */
-#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */
-#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */
-#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
-
-/* Extended Interrupt Cause Set */
-#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
-#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */
-#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */
-#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */
-#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
-#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
-#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
-#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */
-#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
-#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */
-#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
-#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-/* Extended Interrupt Mask Set */
-#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
-#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
-#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */
-#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */
-#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
-#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
-#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
-#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */
-#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
-#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */
-#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
-#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-/* Extended Interrupt Mask Clear */
-#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */
-#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */
-#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */
-#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */
-#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */
-#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */
-#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */
-#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */
-#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */
-#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */
-#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */
-#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */
-#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-#define IXGBE_EIMS_ENABLE_MASK ( \
- IXGBE_EIMS_RTX_QUEUE | \
- IXGBE_EIMS_LSC | \
- IXGBE_EIMS_TCP_TIMER | \
- IXGBE_EIMS_OTHER)
-
-/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
-#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */
-#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */
-#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */
-#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */
-#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */
-#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */
-#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */
-#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */
-#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */
-#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */
-#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */
-#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */
-#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */
-#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */
-#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */
-#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */
-#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */
-#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass check of control bits */
-#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */
-#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */
-#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */
-#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */
-#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */
-
-#define IXGBE_MAX_FTQF_FILTERS 128
-#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003
-#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000
-#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001
-#define IXGBE_FTQF_PROTOCOL_SCTP 2
-#define IXGBE_FTQF_PRIORITY_MASK 0x00000007
-#define IXGBE_FTQF_PRIORITY_SHIFT 2
-#define IXGBE_FTQF_POOL_MASK 0x0000003F
-#define IXGBE_FTQF_POOL_SHIFT 8
-#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F
-#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25
-#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E
-#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D
-#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B
-#define IXGBE_FTQF_DEST_PORT_MASK 0x17
-#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F
-#define IXGBE_FTQF_POOL_MASK_EN 0x40000000
-#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000
-
-/* Interrupt clear mask */
-#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF
-
-/* Interrupt Vector Allocation Registers */
-#define IXGBE_IVAR_REG_NUM 25
-#define IXGBE_IVAR_REG_NUM_82599 64
-#define IXGBE_IVAR_TXRX_ENTRY 96
-#define IXGBE_IVAR_RX_ENTRY 64
-#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i))
-#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i))
-#define IXGBE_IVAR_TX_ENTRY 32
-
-#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */
-#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */
-
-#define IXGBE_MSIX_VECTOR(_i) (0 + (_i))
-
-#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
-
-/* ETYPE Queue Filter/Select Bit Masks */
-#define IXGBE_MAX_ETQF_FILTERS 8
-#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */
-#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */
-#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
-#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
-#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
-
-#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */
-#define IXGBE_ETQS_RX_QUEUE_SHIFT 16
-#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */
-#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */
-
-/*
- * ETQF filter list: one static filter per filter consumer. This is
- * to avoid filter collisions later. Add new filters
- * here!!
- *
- * Current filters:
- * EAPOL 802.1x (0x888e): Filter 0
- * FCoE (0x8906): Filter 2
- * 1588 (0x88f7): Filter 3
- * FIP (0x8914): Filter 4
- */
-#define IXGBE_ETQF_FILTER_EAPOL 0
-#define IXGBE_ETQF_FILTER_FCOE 2
-#define IXGBE_ETQF_FILTER_1588 3
-#define IXGBE_ETQF_FILTER_FIP 4
-/* VLAN Control Bit Masks */
-#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */
-#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */
-#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */
-#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */
-#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */
-
-/* VLAN pool filtering masks */
-#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */
-#define IXGBE_VLVF_ENTRIES 64
-#define IXGBE_VLVF_VLANID_MASK 0x00000FFF
-
-/* Per VF Port VLAN insertion rules */
-#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */
-#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */
-
-#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */
-
-/* STATUS Bit Masks */
-#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */
-#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/
-#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */
-
-#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */
-#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */
-
-/* ESDP Bit Masks */
-#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */
-#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */
-#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */
-#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */
-#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */
-#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */
-#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */
-#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */
-#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */
-
-/* LEDCTL Bit Masks */
-#define IXGBE_LED_IVRT_BASE 0x00000040
-#define IXGBE_LED_BLINK_BASE 0x00000080
-#define IXGBE_LED_MODE_MASK_BASE 0x0000000F
-#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i)))
-#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i))
-#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
-#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
-#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
-
-/* LED modes */
-#define IXGBE_LED_LINK_UP 0x0
-#define IXGBE_LED_LINK_10G 0x1
-#define IXGBE_LED_MAC 0x2
-#define IXGBE_LED_FILTER 0x3
-#define IXGBE_LED_LINK_ACTIVE 0x4
-#define IXGBE_LED_LINK_1G 0x5
-#define IXGBE_LED_ON 0xE
-#define IXGBE_LED_OFF 0xF
-
-/* AUTOC Bit Masks */
-#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000
-#define IXGBE_AUTOC_KX4_SUPP 0x80000000
-#define IXGBE_AUTOC_KX_SUPP 0x40000000
-#define IXGBE_AUTOC_PAUSE 0x30000000
-#define IXGBE_AUTOC_ASM_PAUSE 0x20000000
-#define IXGBE_AUTOC_SYM_PAUSE 0x10000000
-#define IXGBE_AUTOC_RF 0x08000000
-#define IXGBE_AUTOC_PD_TMR 0x06000000
-#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
-#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
-#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
-#define IXGBE_AUTOC_FECA 0x00040000
-#define IXGBE_AUTOC_FECR 0x00020000
-#define IXGBE_AUTOC_KR_SUPP 0x00010000
-#define IXGBE_AUTOC_AN_RESTART 0x00001000
-#define IXGBE_AUTOC_FLU 0x00000001
-#define IXGBE_AUTOC_LMS_SHIFT 13
-#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT)
-#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-
-#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200
-#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
-#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180
-#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
-#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
-
-#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000
-#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000
-#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16
-#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
-#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT)
-
-#define IXGBE_MACC_FLU 0x00000001
-#define IXGBE_MACC_FSV_10G 0x00030000
-#define IXGBE_MACC_FS 0x00040000
-#define IXGBE_MAC_RX2TX_LPBK 0x00000002
-
-/* LINKS Bit Masks */
-#define IXGBE_LINKS_KX_AN_COMP 0x80000000
-#define IXGBE_LINKS_UP 0x40000000
-#define IXGBE_LINKS_SPEED 0x20000000
-#define IXGBE_LINKS_MODE 0x18000000
-#define IXGBE_LINKS_RX_MODE 0x06000000
-#define IXGBE_LINKS_TX_MODE 0x01800000
-#define IXGBE_LINKS_XGXS_EN 0x00400000
-#define IXGBE_LINKS_SGMII_EN 0x02000000
-#define IXGBE_LINKS_PCS_1G_EN 0x00200000
-#define IXGBE_LINKS_1G_AN_EN 0x00100000
-#define IXGBE_LINKS_KX_AN_IDLE 0x00080000
-#define IXGBE_LINKS_1G_SYNC 0x00040000
-#define IXGBE_LINKS_10G_ALIGN 0x00020000
-#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000
-#define IXGBE_LINKS_TL_FAULT 0x00001000
-#define IXGBE_LINKS_SIGNAL 0x00000F00
-
-#define IXGBE_LINKS_SPEED_82599 0x30000000
-#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
-#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
-#define IXGBE_LINKS_SPEED_100_82599 0x10000000
-#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */
-#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */
-
-#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040
-
-/* PCS1GLSTA Bit Masks */
-#define IXGBE_PCS1GLSTA_LINK_OK 1
-#define IXGBE_PCS1GLSTA_SYNK_OK 0x10
-#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000
-#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000
-#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000
-#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000
-#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000
-
-#define IXGBE_PCS1GANA_SYM_PAUSE 0x80
-#define IXGBE_PCS1GANA_ASM_PAUSE 0x100
-
-/* PCS1GLCTL Bit Masks */
-#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */
-#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1
-#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20
-#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40
-#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000
-#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000
-
-/* ANLP1 Bit Masks */
-#define IXGBE_ANLP1_PAUSE 0x0C00
-#define IXGBE_ANLP1_SYM_PAUSE 0x0400
-#define IXGBE_ANLP1_ASM_PAUSE 0x0800
-#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000
-
-/* SW Semaphore Register bitmasks */
-#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
-#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
-#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
-#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */
-
-/* SW_FW_SYNC/GSSR definitions */
-#define IXGBE_GSSR_EEP_SM 0x0001
-#define IXGBE_GSSR_PHY0_SM 0x0002
-#define IXGBE_GSSR_PHY1_SM 0x0004
-#define IXGBE_GSSR_MAC_CSR_SM 0x0008
-#define IXGBE_GSSR_FLASH_SM 0x0010
-#define IXGBE_GSSR_SW_MNG_SM 0x0400
-
-/* FW Status register bitmask */
-#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
-
-/* EEC Register */
-#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */
-#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */
-#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */
-#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */
-#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */
-#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */
-#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */
-#define IXGBE_EEC_FWE_SHIFT 4
-#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */
-#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */
-#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */
-#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */
-#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */
-#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */
-#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */
-/* EEPROM Addressing bits based on type (0-small, 1-large) */
-#define IXGBE_EEC_ADDR_SIZE 0x00000400
-#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */
-#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */
-
-#define IXGBE_EEC_SIZE_SHIFT 11
-#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6
-#define IXGBE_EEPROM_OPCODE_BITS 8
-
-/* Part Number String Length */
-#define IXGBE_PBANUM_LENGTH 11
-
-/* Checksum and EEPROM pointers */
-#define IXGBE_PBANUM_PTR_GUARD 0xFAFA
-#define IXGBE_EEPROM_CHECKSUM 0x3F
-#define IXGBE_EEPROM_SUM 0xBABA
-#define IXGBE_PCIE_ANALOG_PTR 0x03
-#define IXGBE_ATLAS0_CONFIG_PTR 0x04
-#define IXGBE_PHY_PTR 0x04
-#define IXGBE_ATLAS1_CONFIG_PTR 0x05
-#define IXGBE_OPTION_ROM_PTR 0x05
-#define IXGBE_PCIE_GENERAL_PTR 0x06
-#define IXGBE_PCIE_CONFIG0_PTR 0x07
-#define IXGBE_PCIE_CONFIG1_PTR 0x08
-#define IXGBE_CORE0_PTR 0x09
-#define IXGBE_CORE1_PTR 0x0A
-#define IXGBE_MAC0_PTR 0x0B
-#define IXGBE_MAC1_PTR 0x0C
-#define IXGBE_CSR0_CONFIG_PTR 0x0D
-#define IXGBE_CSR1_CONFIG_PTR 0x0E
-#define IXGBE_FW_PTR 0x0F
-#define IXGBE_PBANUM0_PTR 0x15
-#define IXGBE_PBANUM1_PTR 0x16
-#define IXGBE_FREE_SPACE_PTR 0X3E
-#define IXGBE_SAN_MAC_ADDR_PTR 0x28
-#define IXGBE_DEVICE_CAPS 0x2C
-#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11
-#define IXGBE_PCIE_MSIX_82599_CAPS 0x72
-#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
-
-/* MSI-X capability fields masks */
-#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF
-
-/* Legacy EEPROM word offsets */
-#define IXGBE_ISCSI_BOOT_CAPS 0x0033
-#define IXGBE_ISCSI_SETUP_PORT_0 0x0030
-#define IXGBE_ISCSI_SETUP_PORT_1 0x0034
-
-/* EEPROM Commands - SPI */
-#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */
-#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01
-#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */
-#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */
-#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */
-#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */
-/* EEPROM reset Write Enable latch */
-#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04
-#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */
-#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */
-#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */
-#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */
-#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */
-
-/* EEPROM Read Register */
-#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */
-#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */
-#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */
-#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */
-#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */
-#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */
-
-#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
-
-#define IXGBE_EEPROM_PAGE_SIZE_MAX 128
-#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */
-#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */
-
-#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
-#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
-#endif
-
-#ifndef IXGBE_EERD_EEWR_ATTEMPTS
-/* Number of 5 microseconds we wait for EERD read and
- * EERW write to complete */
-#define IXGBE_EERD_EEWR_ATTEMPTS 100000
-#endif
-
-#ifndef IXGBE_FLUDONE_ATTEMPTS
-/* # attempts we wait for flush update to complete */
-#define IXGBE_FLUDONE_ATTEMPTS 20000
-#endif
-
-#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */
-#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */
-#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */
-#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */
-
-#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0
-#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3
-#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1
-#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2
-#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2
-#define IXGBE_FW_LESM_STATE_1 0x1
-#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */
-#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4
-#define IXGBE_FW_PATCH_VERSION_4 0x7
-#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */
-#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */
-#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */
-#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */
-#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */
-#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */
-#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt. SAN MAC capability */
-#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
-#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */
-#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt. WWNN prefix offset */
-#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt. WWPN prefix offset */
-#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt. SAN MAC exists */
-#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt. WWN base exists */
-
-/* PCI Bus Info */
-#define IXGBE_PCI_DEVICE_STATUS 0xAA
-#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020
-#define IXGBE_PCI_LINK_STATUS 0xB2
-#define IXGBE_PCI_DEVICE_CONTROL2 0xC8
-#define IXGBE_PCI_LINK_WIDTH 0x3F0
-#define IXGBE_PCI_LINK_WIDTH_1 0x10
-#define IXGBE_PCI_LINK_WIDTH_2 0x20
-#define IXGBE_PCI_LINK_WIDTH_4 0x40
-#define IXGBE_PCI_LINK_WIDTH_8 0x80
-#define IXGBE_PCI_LINK_SPEED 0xF
-#define IXGBE_PCI_LINK_SPEED_2500 0x1
-#define IXGBE_PCI_LINK_SPEED_5000 0x2
-#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E
-#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80
-#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005
-
-/* Number of 100 microseconds we wait for PCI Express master disable */
-#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
-
-/* Check whether address is multicast. This is little-endian specific check.*/
-#define IXGBE_IS_MULTICAST(Address) \
- (bool)(((u8 *)(Address))[0] & ((u8)0x01))
-
-/* Check whether an address is broadcast. */
-#define IXGBE_IS_BROADCAST(Address) \
- ((((u8 *)(Address))[0] == ((u8)0xff)) && \
- (((u8 *)(Address))[1] == ((u8)0xff)))
-
-/* RAH */
-#define IXGBE_RAH_VIND_MASK 0x003C0000
-#define IXGBE_RAH_VIND_SHIFT 18
-#define IXGBE_RAH_AV 0x80000000
-#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF
-
-/* Header split receive */
-#define IXGBE_RFCTL_ISCSI_DIS 0x00000001
-#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E
-#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
-#define IXGBE_RFCTL_NFSW_DIS 0x00000040
-#define IXGBE_RFCTL_NFSR_DIS 0x00000080
-#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300
-#define IXGBE_RFCTL_NFS_VER_SHIFT 8
-#define IXGBE_RFCTL_NFS_VER_2 0
-#define IXGBE_RFCTL_NFS_VER_3 1
-#define IXGBE_RFCTL_NFS_VER_4 2
-#define IXGBE_RFCTL_IPV6_DIS 0x00000400
-#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800
-#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000
-#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000
-#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
-
-/* Transmit Config masks */
-#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */
-#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. write-back flushing */
-#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */
-/* Enable short packet padding to 64 bytes */
-#define IXGBE_TX_PAD_ENABLE 0x00000400
-#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */
-/* This allows for 16K packets + 4k for vlan */
-#define IXGBE_MAX_FRAME_SZ 0x40040000
-
-#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */
-#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */
-
-/* Receive Config masks */
-#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
-#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
-#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
-#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
-#define IXGBE_RXDCTL_RLPML_EN 0x00008000
-#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
-
-#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
-#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
-#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
-#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
-#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
-#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
-/* Receive Priority Flow Control Enable */
-#define IXGBE_FCTRL_RPFCE 0x00004000
-#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
-#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */
-#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */
-#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */
-#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */
-
-#define IXGBE_MFLCN_RPFCE_SHIFT 4
-
-/* Multiple Receive Queue Control */
-#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */
-#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */
-#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */
-#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */
-#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */
-#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */
-#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */
-#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */
-#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */
-#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */
-#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */
-#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000
-#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000
-#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000
-#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
-#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000
-#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000
-#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000
-#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000
-#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000
-#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
-#define IXGBE_MRQC_L3L4TXSWEN 0x00008000
-
-/* Queue Drop Enable */
-#define IXGBE_QDE_ENABLE 0x00000001
-#define IXGBE_QDE_IDX_MASK 0x00007F00
-#define IXGBE_QDE_IDX_SHIFT 8
-
-#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */
-#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-
-#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000
-#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000
-#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000
-#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000
-#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000
-/* Multiple Transmit Queue Command Register */
-#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */
-#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */
-#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */
-#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */
-#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */
-#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */
-#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA or 4 TQ if VT_ENA */
-
-/* Receive Descriptor bit definitions */
-#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
-#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
-#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
-#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
-#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
-#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
-#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
-#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
-#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
-#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
-#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */
-#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
-#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
-#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
-#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
-#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
-#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
-#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */
-#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */
-#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
-#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
-#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
-#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */
-#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
-#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCoEFe/IPE */
-#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */
-#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */
-#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */
-#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */
-#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
-#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
-#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
-#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
-#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */
-#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */
-#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */
-#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */
-#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define IXGBE_RXD_PRI_SHIFT 13
-#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
-#define IXGBE_RXD_CFI_SHIFT 12
-
-#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
-#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
-#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
-#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
-#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */
-#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */
-#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */
-#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
-#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */
-#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
-#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */
-
-/* PSRTYPE bit definitions */
-#define IXGBE_PSRTYPE_TCPHDR 0x00000010
-#define IXGBE_PSRTYPE_UDPHDR 0x00000020
-#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
-#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
-#define IXGBE_PSRTYPE_L2HDR 0x00001000
-
-/* SRRCTL bit definitions */
-#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
-#define IXGBE_SRRCTL_RDMTS_SHIFT 22
-#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
-#define IXGBE_SRRCTL_DROP_EN 0x10000000
-#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
-#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
-#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
-#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
-#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
-
-#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000
-#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
-
-#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
-#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
-#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
-#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
-#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
-#define IXGBE_RXDADV_RSCCNT_SHIFT 17
-#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
-#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
-#define IXGBE_RXDADV_SPH 0x8000
-
-/* RSS Hash results */
-#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000
-#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001
-#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002
-#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003
-#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004
-#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005
-#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
-#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007
-#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008
-#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
-
-/* RSS Packet Types as indicated in the receive descriptor. */
-#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000
-#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */
-#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */
-#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */
-#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */
-#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */
-#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */
-#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */
-#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */
-#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */
-#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */
-#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */
-#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */
-#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */
-#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */
-
-/* Security Processing bit Indication */
-#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000
-#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000
-#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000
-#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000
-#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000
-
-/* Masks to determine if packets should be dropped due to frame errors */
-#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
- IXGBE_RXD_ERR_CE | \
- IXGBE_RXD_ERR_LE | \
- IXGBE_RXD_ERR_PE | \
- IXGBE_RXD_ERR_OSE | \
- IXGBE_RXD_ERR_USE)
-
-#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
- IXGBE_RXDADV_ERR_CE | \
- IXGBE_RXDADV_ERR_LE | \
- IXGBE_RXDADV_ERR_PE | \
- IXGBE_RXDADV_ERR_OSE | \
- IXGBE_RXDADV_ERR_USE)
-
-/* Multicast bit mask */
-#define IXGBE_MCSTCTRL_MFE 0x4
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8
-#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024
-
-/* Vlan-specific macros */
-#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */
-#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */
-#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */
-#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
-
-/* SR-IOV specific macros */
-#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4)
-#define IXGBE_MBVFICR(_i) (0x00710 + (_i * 4))
-#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600))
-#define IXGBE_VFLREC(_i) (0x00700 + (_i * 4))
-
-enum ixgbe_fdir_pballoc_type {
- IXGBE_FDIR_PBALLOC_NONE = 0,
- IXGBE_FDIR_PBALLOC_64K = 1,
- IXGBE_FDIR_PBALLOC_128K = 2,
- IXGBE_FDIR_PBALLOC_256K = 3,
-};
-#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT 16
-
-/* Flow Director register values */
-#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001
-#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002
-#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003
-#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008
-#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010
-#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020
-#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080
-#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8
-#define IXGBE_FDIRCTRL_FLEX_SHIFT 16
-#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000
-#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24
-#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000
-#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28
-
-#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16
-#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16
-#define IXGBE_FDIRIP6M_DIPM_SHIFT 16
-#define IXGBE_FDIRM_VLANID 0x00000001
-#define IXGBE_FDIRM_VLANP 0x00000002
-#define IXGBE_FDIRM_POOL 0x00000004
-#define IXGBE_FDIRM_L4P 0x00000008
-#define IXGBE_FDIRM_FLEX 0x00000010
-#define IXGBE_FDIRM_DIPv6 0x00000020
-
-#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF
-#define IXGBE_FDIRFREE_FREE_SHIFT 0
-#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000
-#define IXGBE_FDIRFREE_COLL_SHIFT 16
-#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F
-#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0
-#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000
-#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16
-#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF
-#define IXGBE_FDIRUSTAT_ADD_SHIFT 0
-#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000
-#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16
-#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF
-#define IXGBE_FDIRFSTAT_FADD_SHIFT 0
-#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00
-#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8
-#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16
-#define IXGBE_FDIRVLAN_FLEX_SHIFT 16
-#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15
-#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16
-
-#define IXGBE_FDIRCMD_CMD_MASK 0x00000003
-#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001
-#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002
-#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003
-#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004
-#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008
-#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010
-#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020
-#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040
-#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060
-#define IXGBE_FDIRCMD_IPV6 0x00000080
-#define IXGBE_FDIRCMD_CLEARHT 0x00000100
-#define IXGBE_FDIRCMD_DROP 0x00000200
-#define IXGBE_FDIRCMD_INT 0x00000400
-#define IXGBE_FDIRCMD_LAST 0x00000800
-#define IXGBE_FDIRCMD_COLLISION 0x00001000
-#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000
-#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5
-#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16
-#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24
-#define IXGBE_FDIR_INIT_DONE_POLL 10
-#define IXGBE_FDIRCMD_CMD_POLL 10
-
-#define IXGBE_FDIR_DROP_QUEUE 127
-
-/* Manageablility Host Interface defines */
-#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */
-#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */
-#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */
-
-/* CEM Support */
-#define FW_CEM_HDR_LEN 0x4
-#define FW_CEM_CMD_DRIVER_INFO 0xDD
-#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5
-#define FW_CEM_CMD_RESERVED 0x0
-#define FW_CEM_UNUSED_VER 0x0
-#define FW_CEM_MAX_RETRIES 3
-#define FW_CEM_RESP_STATUS_SUCCESS 0x1
-
-/* Host Interface Command Structures */
-struct ixgbe_hic_hdr {
- u8 cmd;
- u8 buf_len;
- union {
- u8 cmd_resv;
- u8 ret_status;
- } cmd_or_resp;
- u8 checksum;
-};
-
-struct ixgbe_hic_drv_info {
- struct ixgbe_hic_hdr hdr;
- u8 port_num;
- u8 ver_sub;
- u8 ver_build;
- u8 ver_min;
- u8 ver_maj;
- u8 pad; /* end spacing to ensure length is mult. of dword */
- u16 pad2; /* end spacing to ensure length is mult. of dword2 */
-};
-
-/* Transmit Descriptor - Advanced */
-union ixgbe_adv_tx_desc {
- struct {
- __le64 buffer_addr; /* Address of descriptor's data buf */
- __le32 cmd_type_len;
- __le32 olinfo_status;
- } read;
- struct {
- __le64 rsvd; /* Reserved */
- __le32 nxtseq_seed;
- __le32 status;
- } wb;
-};
-
-/* Receive Descriptor - Advanced */
-union ixgbe_adv_rx_desc {
- struct {
- __le64 pkt_addr; /* Packet buffer address */
- __le64 hdr_addr; /* Header buffer address */
- } read;
- struct {
- struct {
- union {
- __le32 data;
- struct {
- __le16 pkt_info; /* RSS, Pkt type */
- __le16 hdr_info; /* Splithdr, hdrlen */
- } hs_rss;
- } lo_dword;
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length; /* Packet length */
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-/* Context descriptors */
-struct ixgbe_adv_tx_context_desc {
- __le32 vlan_macip_lens;
- __le32 seqnum_seed;
- __le32 type_tucmd_mlhl;
- __le32 mss_l4len_idx;
-};
-
-/* Adv Transmit Descriptor Config Masks */
-#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */
-#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */
-#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */
-#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */
-#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
-#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
-#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
-#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
-#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
-#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
-#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */
-#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
-#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
-#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
-#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
-#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */
-#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */
-#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
-#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */
-#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
-#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
-#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
-#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU */
-#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */
-#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
-#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
-#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
-#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
-#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
-#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/
-#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */
-#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */
-#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */
-#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */
-#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */
-#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */
-#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */
-#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation: End */
-#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation: Start */
-#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */
-#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */
-#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */
-#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */
-#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
-
-/* Autonegotiation advertised speeds */
-typedef u32 ixgbe_autoneg_advertised;
-/* Link speed */
-typedef u32 ixgbe_link_speed;
-#define IXGBE_LINK_SPEED_UNKNOWN 0
-#define IXGBE_LINK_SPEED_100_FULL 0x0008
-#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
-#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
-#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \
- IXGBE_LINK_SPEED_10GB_FULL)
-#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \
- IXGBE_LINK_SPEED_1GB_FULL | \
- IXGBE_LINK_SPEED_10GB_FULL)
-
-
-/* Physical layer type */
-typedef u32 ixgbe_physical_layer;
-#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0
-#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001
-#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002
-#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004
-#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010
-#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020
-#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080
-#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100
-#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200
-#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400
-#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800
-#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000
-#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000
-
-/* Flow Control Macros */
-#define PAUSE_RTT 8
-#define PAUSE_MTU(MTU) ((MTU + 1024 - 1) / 1024)
-
-#define FC_HIGH_WATER(MTU) ((((PAUSE_RTT + PAUSE_MTU(MTU)) * 144) + 99) / 100 +\
- PAUSE_MTU(MTU))
-#define FC_LOW_WATER(MTU) (2 * (2 * PAUSE_MTU(MTU) + PAUSE_RTT))
-
-/* Software ATR hash keys */
-#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2
-#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614
-
-/* Software ATR input stream values and masks */
-#define IXGBE_ATR_HASH_MASK 0x7fff
-#define IXGBE_ATR_L4TYPE_MASK 0x3
-#define IXGBE_ATR_L4TYPE_UDP 0x1
-#define IXGBE_ATR_L4TYPE_TCP 0x2
-#define IXGBE_ATR_L4TYPE_SCTP 0x3
-#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4
-enum ixgbe_atr_flow_type {
- IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0,
- IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1,
- IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2,
- IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3,
- IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4,
- IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5,
- IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6,
- IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7,
-};
-
-/* Flow Director ATR input struct. */
-union ixgbe_atr_input {
- /*
- * Byte layout in order, all values with MSB first:
- *
- * vm_pool - 1 byte
- * flow_type - 1 byte
- * vlan_id - 2 bytes
- * src_ip - 16 bytes
- * dst_ip - 16 bytes
- * src_port - 2 bytes
- * dst_port - 2 bytes
- * flex_bytes - 2 bytes
- * bkt_hash - 2 bytes
- */
- struct {
- u8 vm_pool;
- u8 flow_type;
- __be16 vlan_id;
- __be32 dst_ip[4];
- __be32 src_ip[4];
- __be16 src_port;
- __be16 dst_port;
- __be16 flex_bytes;
- __be16 bkt_hash;
- } formatted;
- __be32 dword_stream[11];
-};
-
-/* Flow Director compressed ATR hash input struct */
-union ixgbe_atr_hash_dword {
- struct {
- u8 vm_pool;
- u8 flow_type;
- __be16 vlan_id;
- } formatted;
- __be32 ip;
- struct {
- __be16 src;
- __be16 dst;
- } port;
- __be16 flex_bytes;
- __be32 dword;
-};
-
-enum ixgbe_eeprom_type {
- ixgbe_eeprom_uninitialized = 0,
- ixgbe_eeprom_spi,
- ixgbe_flash,
- ixgbe_eeprom_none /* No NVM support */
-};
-
-enum ixgbe_mac_type {
- ixgbe_mac_unknown = 0,
- ixgbe_mac_82598EB,
- ixgbe_mac_82599EB,
- ixgbe_mac_X540,
- ixgbe_num_macs
-};
-
-enum ixgbe_phy_type {
- ixgbe_phy_unknown = 0,
- ixgbe_phy_none,
- ixgbe_phy_tn,
- ixgbe_phy_aq,
- ixgbe_phy_cu_unknown,
- ixgbe_phy_qt,
- ixgbe_phy_xaui,
- ixgbe_phy_nl,
- ixgbe_phy_sfp_passive_tyco,
- ixgbe_phy_sfp_passive_unknown,
- ixgbe_phy_sfp_active_unknown,
- ixgbe_phy_sfp_avago,
- ixgbe_phy_sfp_ftl,
- ixgbe_phy_sfp_ftl_active,
- ixgbe_phy_sfp_unknown,
- ixgbe_phy_sfp_intel,
- ixgbe_phy_sfp_unsupported,
- ixgbe_phy_generic
-};
-
-/*
- * SFP+ module type IDs:
- *
- * ID Module Type
- * =============
- * 0 SFP_DA_CU
- * 1 SFP_SR
- * 2 SFP_LR
- * 3 SFP_DA_CU_CORE0 - 82599-specific
- * 4 SFP_DA_CU_CORE1 - 82599-specific
- * 5 SFP_SR/LR_CORE0 - 82599-specific
- * 6 SFP_SR/LR_CORE1 - 82599-specific
- */
-enum ixgbe_sfp_type {
- ixgbe_sfp_type_da_cu = 0,
- ixgbe_sfp_type_sr = 1,
- ixgbe_sfp_type_lr = 2,
- ixgbe_sfp_type_da_cu_core0 = 3,
- ixgbe_sfp_type_da_cu_core1 = 4,
- ixgbe_sfp_type_srlr_core0 = 5,
- ixgbe_sfp_type_srlr_core1 = 6,
- ixgbe_sfp_type_da_act_lmt_core0 = 7,
- ixgbe_sfp_type_da_act_lmt_core1 = 8,
- ixgbe_sfp_type_1g_cu_core0 = 9,
- ixgbe_sfp_type_1g_cu_core1 = 10,
- ixgbe_sfp_type_not_present = 0xFFFE,
- ixgbe_sfp_type_unknown = 0xFFFF
-};
-
-enum ixgbe_media_type {
- ixgbe_media_type_unknown = 0,
- ixgbe_media_type_fiber,
- ixgbe_media_type_fiber_lco,
- ixgbe_media_type_copper,
- ixgbe_media_type_backplane,
- ixgbe_media_type_cx4,
- ixgbe_media_type_virtual
-};
-
-/* Flow Control Settings */
-enum ixgbe_fc_mode {
- ixgbe_fc_none = 0,
- ixgbe_fc_rx_pause,
- ixgbe_fc_tx_pause,
- ixgbe_fc_full,
-#ifdef CONFIG_DCB
- ixgbe_fc_pfc,
-#endif
- ixgbe_fc_default
-};
-
-/* Smart Speed Settings */
-#define IXGBE_SMARTSPEED_MAX_RETRIES 3
-enum ixgbe_smart_speed {
- ixgbe_smart_speed_auto = 0,
- ixgbe_smart_speed_on,
- ixgbe_smart_speed_off
-};
-
-/* PCI bus types */
-enum ixgbe_bus_type {
- ixgbe_bus_type_unknown = 0,
- ixgbe_bus_type_pci,
- ixgbe_bus_type_pcix,
- ixgbe_bus_type_pci_express,
- ixgbe_bus_type_reserved
-};
-
-/* PCI bus speeds */
-enum ixgbe_bus_speed {
- ixgbe_bus_speed_unknown = 0,
- ixgbe_bus_speed_33 = 33,
- ixgbe_bus_speed_66 = 66,
- ixgbe_bus_speed_100 = 100,
- ixgbe_bus_speed_120 = 120,
- ixgbe_bus_speed_133 = 133,
- ixgbe_bus_speed_2500 = 2500,
- ixgbe_bus_speed_5000 = 5000,
- ixgbe_bus_speed_reserved
-};
-
-/* PCI bus widths */
-enum ixgbe_bus_width {
- ixgbe_bus_width_unknown = 0,
- ixgbe_bus_width_pcie_x1 = 1,
- ixgbe_bus_width_pcie_x2 = 2,
- ixgbe_bus_width_pcie_x4 = 4,
- ixgbe_bus_width_pcie_x8 = 8,
- ixgbe_bus_width_32 = 32,
- ixgbe_bus_width_64 = 64,
- ixgbe_bus_width_reserved
-};
-
-struct ixgbe_addr_filter_info {
- u32 num_mc_addrs;
- u32 rar_used_count;
- u32 mta_in_use;
- u32 overflow_promisc;
- bool uc_set_promisc;
- bool user_set_promisc;
-};
-
-/* Bus parameters */
-struct ixgbe_bus_info {
- enum ixgbe_bus_speed speed;
- enum ixgbe_bus_width width;
- enum ixgbe_bus_type type;
-
- u16 func;
- u16 lan_id;
-};
-
-/* Flow control parameters */
-struct ixgbe_fc_info {
- u32 high_water; /* Flow Control High-water */
- u32 low_water; /* Flow Control Low-water */
- u16 pause_time; /* Flow Control Pause timer */
- bool send_xon; /* Flow control send XON */
- bool strict_ieee; /* Strict IEEE mode */
- bool disable_fc_autoneg; /* Do not autonegotiate FC */
- bool fc_was_autonegged; /* Is current_mode the result of autonegging? */
- enum ixgbe_fc_mode current_mode; /* FC mode in effect */
- enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */
-};
-
-/* Statistics counters collected by the MAC */
-struct ixgbe_hw_stats {
- u64 crcerrs;
- u64 illerrc;
- u64 errbc;
- u64 mspdc;
- u64 mpctotal;
- u64 mpc[8];
- u64 mlfc;
- u64 mrfc;
- u64 rlec;
- u64 lxontxc;
- u64 lxonrxc;
- u64 lxofftxc;
- u64 lxoffrxc;
- u64 pxontxc[8];
- u64 pxonrxc[8];
- u64 pxofftxc[8];
- u64 pxoffrxc[8];
- u64 prc64;
- u64 prc127;
- u64 prc255;
- u64 prc511;
- u64 prc1023;
- u64 prc1522;
- u64 gprc;
- u64 bprc;
- u64 mprc;
- u64 gptc;
- u64 gorc;
- u64 gotc;
- u64 rnbc[8];
- u64 ruc;
- u64 rfc;
- u64 roc;
- u64 rjc;
- u64 mngprc;
- u64 mngpdc;
- u64 mngptc;
- u64 tor;
- u64 tpr;
- u64 tpt;
- u64 ptc64;
- u64 ptc127;
- u64 ptc255;
- u64 ptc511;
- u64 ptc1023;
- u64 ptc1522;
- u64 mptc;
- u64 bptc;
- u64 xec;
- u64 rqsmr[16];
- u64 tqsmr[8];
- u64 qprc[16];
- u64 qptc[16];
- u64 qbrc[16];
- u64 qbtc[16];
- u64 qprdc[16];
- u64 pxon2offc[8];
- u64 fdirustat_add;
- u64 fdirustat_remove;
- u64 fdirfstat_fadd;
- u64 fdirfstat_fremove;
- u64 fdirmatch;
- u64 fdirmiss;
- u64 fccrc;
- u64 fcoerpdc;
- u64 fcoeprc;
- u64 fcoeptc;
- u64 fcoedwrc;
- u64 fcoedwtc;
- u64 b2ospc;
- u64 b2ogprc;
- u64 o2bgptc;
- u64 o2bspc;
-};
-
-/* forward declaration */
-struct ixgbe_hw;
-
-/* iterator type for walking multicast address lists */
-typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
- u32 *vmdq);
-
-/* Function pointer table */
-struct ixgbe_eeprom_operations {
- s32 (*init_params)(struct ixgbe_hw *);
- s32 (*read)(struct ixgbe_hw *, u16, u16 *);
- s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
- s32 (*write)(struct ixgbe_hw *, u16, u16);
- s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *);
- s32 (*validate_checksum)(struct ixgbe_hw *, u16 *);
- s32 (*update_checksum)(struct ixgbe_hw *);
- u16 (*calc_checksum)(struct ixgbe_hw *);
-};
-
-struct ixgbe_mac_operations {
- s32 (*init_hw)(struct ixgbe_hw *);
- s32 (*reset_hw)(struct ixgbe_hw *);
- s32 (*start_hw)(struct ixgbe_hw *);
- s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
- enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
- u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
- s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
- s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
- s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
- s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
- s32 (*stop_adapter)(struct ixgbe_hw *);
- s32 (*get_bus_info)(struct ixgbe_hw *);
- void (*set_lan_id)(struct ixgbe_hw *);
- s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*);
- s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8);
- s32 (*setup_sfp)(struct ixgbe_hw *);
- s32 (*enable_rx_dma)(struct ixgbe_hw *, u32);
- s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16);
- void (*release_swfw_sync)(struct ixgbe_hw *, u16);
-
- /* Link */
- void (*disable_tx_laser)(struct ixgbe_hw *);
- void (*enable_tx_laser)(struct ixgbe_hw *);
- void (*flap_tx_laser)(struct ixgbe_hw *);
- s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
- s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
- s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
- bool *);
-
- /* Packet Buffer Manipulation */
- void (*set_rxpba)(struct ixgbe_hw *, int, u32, int);
-
- /* LED */
- s32 (*led_on)(struct ixgbe_hw *, u32);
- s32 (*led_off)(struct ixgbe_hw *, u32);
- s32 (*blink_led_start)(struct ixgbe_hw *, u32);
- s32 (*blink_led_stop)(struct ixgbe_hw *, u32);
-
- /* RAR, Multicast, VLAN */
- s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32);
- s32 (*clear_rar)(struct ixgbe_hw *, u32);
- s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32);
- s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32);
- s32 (*init_rx_addrs)(struct ixgbe_hw *);
- s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
- s32 (*enable_mc)(struct ixgbe_hw *);
- s32 (*disable_mc)(struct ixgbe_hw *);
- s32 (*clear_vfta)(struct ixgbe_hw *);
- s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
- s32 (*init_uta_tables)(struct ixgbe_hw *);
- void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int);
- void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int);
-
- /* Flow Control */
- s32 (*fc_enable)(struct ixgbe_hw *, s32);
-
- /* Manageability interface */
- s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
-};
-
-struct ixgbe_phy_operations {
- s32 (*identify)(struct ixgbe_hw *);
- s32 (*identify_sfp)(struct ixgbe_hw *);
- s32 (*init)(struct ixgbe_hw *);
- s32 (*reset)(struct ixgbe_hw *);
- s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *);
- s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16);
- s32 (*setup_link)(struct ixgbe_hw *);
- s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool,
- bool);
- s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *);
- s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *);
- s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *);
- s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8);
- s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *);
- s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8);
- s32 (*check_overtemp)(struct ixgbe_hw *);
-};
-
-struct ixgbe_eeprom_info {
- struct ixgbe_eeprom_operations ops;
- enum ixgbe_eeprom_type type;
- u32 semaphore_delay;
- u16 word_size;
- u16 address_bits;
- u16 word_page_size;
-};
-
-#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01
-struct ixgbe_mac_info {
- struct ixgbe_mac_operations ops;
- enum ixgbe_mac_type type;
- u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
- /* prefix for World Wide Node Name (WWNN) */
- u16 wwnn_prefix;
- /* prefix for World Wide Port Name (WWPN) */
- u16 wwpn_prefix;
-#define IXGBE_MAX_MTA 128
- u32 mta_shadow[IXGBE_MAX_MTA];
- s32 mc_filter_type;
- u32 mcft_size;
- u32 vft_size;
- u32 num_rar_entries;
- u32 rar_highwater;
- u32 rx_pb_size;
- u32 max_tx_queues;
- u32 max_rx_queues;
- u32 max_msix_vectors;
- u32 orig_autoc;
- u32 orig_autoc2;
- bool orig_link_settings_stored;
- bool autotry_restart;
- u8 flags;
-};
-
-struct ixgbe_phy_info {
- struct ixgbe_phy_operations ops;
- struct mdio_if_info mdio;
- enum ixgbe_phy_type type;
- u32 id;
- enum ixgbe_sfp_type sfp_type;
- bool sfp_setup_needed;
- u32 revision;
- enum ixgbe_media_type media_type;
- bool reset_disable;
- ixgbe_autoneg_advertised autoneg_advertised;
- enum ixgbe_smart_speed smart_speed;
- bool smart_speed_active;
- bool multispeed_fiber;
- bool reset_if_overtemp;
-};
-
-#include "ixgbe_mbx.h"
-
-struct ixgbe_mbx_operations {
- s32 (*init_params)(struct ixgbe_hw *hw);
- s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16);
- s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16);
- s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16);
- s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16);
- s32 (*check_for_msg)(struct ixgbe_hw *, u16);
- s32 (*check_for_ack)(struct ixgbe_hw *, u16);
- s32 (*check_for_rst)(struct ixgbe_hw *, u16);
-};
-
-struct ixgbe_mbx_stats {
- u32 msgs_tx;
- u32 msgs_rx;
-
- u32 acks;
- u32 reqs;
- u32 rsts;
-};
-
-struct ixgbe_mbx_info {
- struct ixgbe_mbx_operations ops;
- struct ixgbe_mbx_stats stats;
- u32 timeout;
- u32 usec_delay;
- u32 v2p_mailbox;
- u16 size;
-};
-
-struct ixgbe_hw {
- u8 __iomem *hw_addr;
- void *back;
- struct ixgbe_mac_info mac;
- struct ixgbe_addr_filter_info addr_ctrl;
- struct ixgbe_fc_info fc;
- struct ixgbe_phy_info phy;
- struct ixgbe_eeprom_info eeprom;
- struct ixgbe_bus_info bus;
- struct ixgbe_mbx_info mbx;
- u16 device_id;
- u16 vendor_id;
- u16 subsystem_device_id;
- u16 subsystem_vendor_id;
- u8 revision_id;
- bool adapter_stopped;
- bool force_full_reset;
-};
-
-struct ixgbe_info {
- enum ixgbe_mac_type mac;
- s32 (*get_invariants)(struct ixgbe_hw *);
- struct ixgbe_mac_operations *mac_ops;
- struct ixgbe_eeprom_operations *eeprom_ops;
- struct ixgbe_phy_operations *phy_ops;
- struct ixgbe_mbx_operations *mbx_ops;
-};
-
-
-/* Error Codes */
-#define IXGBE_ERR_EEPROM -1
-#define IXGBE_ERR_EEPROM_CHECKSUM -2
-#define IXGBE_ERR_PHY -3
-#define IXGBE_ERR_CONFIG -4
-#define IXGBE_ERR_PARAM -5
-#define IXGBE_ERR_MAC_TYPE -6
-#define IXGBE_ERR_UNKNOWN_PHY -7
-#define IXGBE_ERR_LINK_SETUP -8
-#define IXGBE_ERR_ADAPTER_STOPPED -9
-#define IXGBE_ERR_INVALID_MAC_ADDR -10
-#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11
-#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12
-#define IXGBE_ERR_INVALID_LINK_SETTINGS -13
-#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14
-#define IXGBE_ERR_RESET_FAILED -15
-#define IXGBE_ERR_SWFW_SYNC -16
-#define IXGBE_ERR_PHY_ADDR_INVALID -17
-#define IXGBE_ERR_I2C -18
-#define IXGBE_ERR_SFP_NOT_SUPPORTED -19
-#define IXGBE_ERR_SFP_NOT_PRESENT -20
-#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21
-#define IXGBE_ERR_NO_SAN_ADDR_PTR -22
-#define IXGBE_ERR_FDIR_REINIT_FAILED -23
-#define IXGBE_ERR_EEPROM_VERSION -24
-#define IXGBE_ERR_NO_SPACE -25
-#define IXGBE_ERR_OVERTEMP -26
-#define IXGBE_ERR_FC_NOT_NEGOTIATED -27
-#define IXGBE_ERR_FC_NOT_SUPPORTED -28
-#define IXGBE_ERR_FLOW_CONTROL -29
-#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30
-#define IXGBE_ERR_PBA_SECTION -31
-#define IXGBE_ERR_INVALID_ARGUMENT -32
-#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33
-#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
-
-#endif /* _IXGBE_TYPE_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 10 Gigabit PCI Express Linux driver
- Copyright(c) 1999 - 2011 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-
-#include "ixgbe.h"
-#include "ixgbe_phy.h"
-
-#define IXGBE_X540_MAX_TX_QUEUES 128
-#define IXGBE_X540_MAX_RX_QUEUES 128
-#define IXGBE_X540_RAR_ENTRIES 128
-#define IXGBE_X540_MC_TBL_SIZE 128
-#define IXGBE_X540_VFT_TBL_SIZE 128
-#define IXGBE_X540_RX_PB_SIZE 384
-
-static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw);
-static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw);
-static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
-static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask);
-static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw);
-static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw);
-
-static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw)
-{
- return ixgbe_media_type_copper;
-}
-
-static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw)
-{
- struct ixgbe_mac_info *mac = &hw->mac;
-
- /* Call PHY identify routine to get the phy type */
- ixgbe_identify_phy_generic(hw);
-
- mac->mcft_size = IXGBE_X540_MC_TBL_SIZE;
- mac->vft_size = IXGBE_X540_VFT_TBL_SIZE;
- mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES;
- mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES;
- mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES;
- mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires
- * @hw: pointer to hardware structure
- * @speed: new link speed
- * @autoneg: true if autonegotiation enabled
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- **/
-static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- return hw->phy.ops.setup_link_speed(hw, speed, autoneg,
- autoneg_wait_to_complete);
-}
-
-/**
- * ixgbe_reset_hw_X540 - Perform hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by resetting the transmit and receive units, masks
- * and clears all interrupts, perform a PHY reset, and perform a link (MAC)
- * reset.
- **/
-static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw)
-{
- ixgbe_link_speed link_speed;
- s32 status = 0;
- u32 ctrl;
- u32 ctrl_ext;
- u32 reset_bit;
- u32 i;
- u32 autoc;
- u32 autoc2;
- bool link_up = false;
-
- /* Call adapter stop to disable tx/rx and clear interrupts */
- hw->mac.ops.stop_adapter(hw);
-
- /*
- * Prevent the PCI-E bus from from hanging by disabling PCI-E master
- * access and verify no pending requests before reset
- */
- ixgbe_disable_pcie_master(hw);
-
-mac_reset_top:
- /*
- * Issue global reset to the MAC. Needs to be SW reset if link is up.
- * If link reset is used when link is up, it might reset the PHY when
- * mng is using it. If link is down or the flag to force full link
- * reset is set, then perform link reset.
- */
- if (hw->force_full_reset) {
- reset_bit = IXGBE_CTRL_LNK_RST;
- } else {
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
- if (!link_up)
- reset_bit = IXGBE_CTRL_LNK_RST;
- else
- reset_bit = IXGBE_CTRL_RST;
- }
-
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | reset_bit));
- IXGBE_WRITE_FLUSH(hw);
-
- /* Poll for reset bit to self-clear indicating reset is complete */
- for (i = 0; i < 10; i++) {
- udelay(1);
- ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
- if (!(ctrl & reset_bit))
- break;
- }
- if (ctrl & reset_bit) {
- status = IXGBE_ERR_RESET_FAILED;
- hw_dbg(hw, "Reset polling failed to complete.\n");
- }
-
- /*
- * Double resets are required for recovery from certain error
- * conditions. Between resets, it is necessary to stall to allow time
- * for any pending HW events to complete. We use 1usec since that is
- * what is needed for ixgbe_disable_pcie_master(). The second reset
- * then clears out any effects of those events.
- */
- if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
- hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
- udelay(1);
- goto mac_reset_top;
- }
-
- /* Clear PF Reset Done bit so PF/VF Mail Ops can work */
- ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
- ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
- IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
- IXGBE_WRITE_FLUSH(hw);
-
- msleep(50);
-
- /* Set the Rx packet buffer size. */
- IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT);
-
- /* Store the permanent mac address */
- hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
-
- /*
- * Store the original AUTOC/AUTOC2 values if they have not been
- * stored off yet. Otherwise restore the stored original
- * values since the reset operation sets back to defaults.
- */
- autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
- autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
- if (hw->mac.orig_link_settings_stored == false) {
- hw->mac.orig_autoc = autoc;
- hw->mac.orig_autoc2 = autoc2;
- hw->mac.orig_link_settings_stored = true;
- } else {
- if (autoc != hw->mac.orig_autoc)
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc |
- IXGBE_AUTOC_AN_RESTART));
-
- if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
- (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
- autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
- autoc2 |= (hw->mac.orig_autoc2 &
- IXGBE_AUTOC2_UPPER_MASK);
- IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
- }
- }
-
- /*
- * Store MAC address from RAR0, clear receive address registers, and
- * clear the multicast table. Also reset num_rar_entries to 128,
- * since we modify this value when programming the SAN MAC address.
- */
- hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES;
- hw->mac.ops.init_rx_addrs(hw);
-
- /* Store the permanent mac address */
- hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
-
- /* Store the permanent SAN mac address */
- hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
-
- /* Add the SAN MAC address to the RAR only if it's a valid address */
- if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) {
- hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1,
- hw->mac.san_addr, 0, IXGBE_RAH_AV);
-
- /* Reserve the last RAR for the SAN MAC address */
- hw->mac.num_rar_entries--;
- }
-
- /* Store the alternative WWNN/WWPN prefix */
- hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
- &hw->mac.wwpn_prefix);
-
- return status;
-}
-
-/**
- * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware using the generic start_hw function
- * and the generation start_hw function.
- * Then performs revision-specific operations, if any.
- **/
-static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw)
-{
- s32 ret_val = 0;
-
- ret_val = ixgbe_start_hw_generic(hw);
- if (ret_val != 0)
- goto out;
-
- ret_val = ixgbe_start_hw_gen2(hw);
- hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE;
-out:
- return ret_val;
-}
-
-/**
- * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type
- * @hw: pointer to hardware structure
- *
- * Determines physical layer capabilities of the current configuration.
- **/
-static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw)
-{
- u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
- u16 ext_ability = 0;
-
- hw->phy.ops.identify(hw);
-
- hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD,
- &ext_ability);
- if (ext_ability & MDIO_PMA_EXTABLE_10GBT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_1000BT)
- physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T;
- if (ext_ability & MDIO_PMA_EXTABLE_100BTX)
- physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX;
-
- return physical_layer;
-}
-
-/**
- * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params
- * @hw: pointer to hardware structure
- *
- * Initializes the EEPROM parameters ixgbe_eeprom_info within the
- * ixgbe_hw struct in order to set up EEPROM access.
- **/
-static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw)
-{
- struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
- u32 eec;
- u16 eeprom_size;
-
- if (eeprom->type == ixgbe_eeprom_uninitialized) {
- eeprom->semaphore_delay = 10;
- eeprom->type = ixgbe_flash;
-
- eec = IXGBE_READ_REG(hw, IXGBE_EEC);
- eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
- IXGBE_EEC_SIZE_SHIFT);
- eeprom->word_size = 1 << (eeprom_size +
- IXGBE_EEPROM_WORD_SIZE_SHIFT);
-
- hw_dbg(hw, "Eeprom params: type = %d, size = %d\n",
- eeprom->type, eeprom->word_size);
- }
-
- return 0;
-}
-
-/**
- * ixgbe_read_eerd_X540- Read EEPROM word using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @data: word read from the EEPROM
- *
- * Reads a 16 bit word from the EEPROM using the EERD register.
- **/
-static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data)
-{
- s32 status = 0;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
- 0)
- status = ixgbe_read_eerd_generic(hw, offset, data);
- else
- status = IXGBE_ERR_SWFW_SYNC;
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- return status;
-}
-
-/**
- * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to read
- * @words: number of words
- * @data: word(s) read from the EEPROM
- *
- * Reads a 16 bit word(s) from the EEPROM using the EERD register.
- **/
-static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw,
- u16 offset, u16 words, u16 *data)
-{
- s32 status = 0;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
- 0)
- status = ixgbe_read_eerd_buffer_generic(hw, offset,
- words, data);
- else
- status = IXGBE_ERR_SWFW_SYNC;
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- return status;
-}
-
-/**
- * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @data: word write to the EEPROM
- *
- * Write a 16 bit word to the EEPROM using the EEWR register.
- **/
-static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data)
-{
- s32 status = 0;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0)
- status = ixgbe_write_eewr_generic(hw, offset, data);
- else
- status = IXGBE_ERR_SWFW_SYNC;
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- return status;
-}
-
-/**
- * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR
- * @hw: pointer to hardware structure
- * @offset: offset of word in the EEPROM to write
- * @words: number of words
- * @data: word(s) write to the EEPROM
- *
- * Write a 16 bit word(s) to the EEPROM using the EEWR register.
- **/
-static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw,
- u16 offset, u16 words, u16 *data)
-{
- s32 status = 0;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) ==
- 0)
- status = ixgbe_write_eewr_buffer_generic(hw, offset,
- words, data);
- else
- status = IXGBE_ERR_SWFW_SYNC;
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
- return status;
-}
-
-/**
- * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum
- *
- * This function does not use synchronization for EERD and EEWR. It can
- * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540.
- *
- * @hw: pointer to hardware structure
- **/
-static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw)
-{
- u16 i;
- u16 j;
- u16 checksum = 0;
- u16 length = 0;
- u16 pointer = 0;
- u16 word = 0;
-
- /*
- * Do not use hw->eeprom.ops.read because we do not want to take
- * the synchronization semaphores here. Instead use
- * ixgbe_read_eerd_generic
- */
-
- /* Include 0x0-0x3F in the checksum */
- for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
- if (ixgbe_read_eerd_generic(hw, i, &word) != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- break;
- }
- checksum += word;
- }
-
- /*
- * Include all data from pointers 0x3, 0x6-0xE. This excludes the
- * FW, PHY module, and PCIe Expansion/Option ROM pointers.
- */
- for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
- if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR)
- continue;
-
- if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- break;
- }
-
- /* Skip pointer section if the pointer is invalid. */
- if (pointer == 0xFFFF || pointer == 0 ||
- pointer >= hw->eeprom.word_size)
- continue;
-
- if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- break;
- }
-
- /* Skip pointer section if length is invalid. */
- if (length == 0xFFFF || length == 0 ||
- (pointer + length) >= hw->eeprom.word_size)
- continue;
-
- for (j = pointer+1; j <= pointer+length; j++) {
- if (ixgbe_read_eerd_generic(hw, j, &word) != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- break;
- }
- checksum += word;
- }
- }
-
- checksum = (u16)IXGBE_EEPROM_SUM - checksum;
-
- return checksum;
-}
-
-/**
- * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum
- * @hw: pointer to hardware structure
- * @checksum_val: calculated checksum
- *
- * Performs checksum calculation and validates the EEPROM checksum. If the
- * caller does not need checksum_val, the value can be NULL.
- **/
-static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw,
- u16 *checksum_val)
-{
- s32 status;
- u16 checksum;
- u16 read_checksum = 0;
-
- /*
- * Read the first word from the EEPROM. If this times out or fails, do
- * not continue or we could be in for a very long wait while every
- * EEPROM read fails
- */
- status = hw->eeprom.ops.read(hw, 0, &checksum);
-
- if (status != 0) {
- hw_dbg(hw, "EEPROM read failed\n");
- goto out;
- }
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
- checksum = hw->eeprom.ops.calc_checksum(hw);
-
- /*
- * Do not use hw->eeprom.ops.read because we do not want to take
- * the synchronization semaphores twice here.
- */
- ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM,
- &read_checksum);
-
- /*
- * Verify read checksum from EEPROM is the same as
- * calculated checksum
- */
- if (read_checksum != checksum)
- status = IXGBE_ERR_EEPROM_CHECKSUM;
-
- /* If the user cares, return the calculated checksum */
- if (checksum_val)
- *checksum_val = checksum;
- } else {
- status = IXGBE_ERR_SWFW_SYNC;
- }
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
-out:
- return status;
-}
-
-/**
- * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash
- * @hw: pointer to hardware structure
- *
- * After writing EEPROM to shadow RAM using EEWR register, software calculates
- * checksum and updates the EEPROM and instructs the hardware to update
- * the flash.
- **/
-static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw)
-{
- s32 status;
- u16 checksum;
-
- /*
- * Read the first word from the EEPROM. If this times out or fails, do
- * not continue or we could be in for a very long wait while every
- * EEPROM read fails
- */
- status = hw->eeprom.ops.read(hw, 0, &checksum);
-
- if (status != 0)
- hw_dbg(hw, "EEPROM read failed\n");
-
- if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) {
- checksum = hw->eeprom.ops.calc_checksum(hw);
-
- /*
- * Do not use hw->eeprom.ops.write because we do not want to
- * take the synchronization semaphores twice here.
- */
- status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM,
- checksum);
-
- if (status == 0)
- status = ixgbe_update_flash_X540(hw);
- else
- status = IXGBE_ERR_SWFW_SYNC;
- }
-
- hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
-
- return status;
-}
-
-/**
- * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device
- * @hw: pointer to hardware structure
- *
- * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy
- * EEPROM from shadow RAM to the flash device.
- **/
-static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw)
-{
- u32 flup;
- s32 status = IXGBE_ERR_EEPROM;
-
- status = ixgbe_poll_flash_update_done_X540(hw);
- if (status == IXGBE_ERR_EEPROM) {
- hw_dbg(hw, "Flash update time out\n");
- goto out;
- }
-
- flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
-
- status = ixgbe_poll_flash_update_done_X540(hw);
- if (status == 0)
- hw_dbg(hw, "Flash update complete\n");
- else
- hw_dbg(hw, "Flash update time out\n");
-
- if (hw->revision_id == 0) {
- flup = IXGBE_READ_REG(hw, IXGBE_EEC);
-
- if (flup & IXGBE_EEC_SEC1VAL) {
- flup |= IXGBE_EEC_FLUP;
- IXGBE_WRITE_REG(hw, IXGBE_EEC, flup);
- }
-
- status = ixgbe_poll_flash_update_done_X540(hw);
- if (status == 0)
- hw_dbg(hw, "Flash update complete\n");
- else
- hw_dbg(hw, "Flash update time out\n");
- }
-out:
- return status;
-}
-
-/**
- * ixgbe_poll_flash_update_done_X540 - Poll flash update status
- * @hw: pointer to hardware structure
- *
- * Polls the FLUDONE (bit 26) of the EEC Register to determine when the
- * flash update is done.
- **/
-static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw)
-{
- u32 i;
- u32 reg;
- s32 status = IXGBE_ERR_EEPROM;
-
- for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) {
- reg = IXGBE_READ_REG(hw, IXGBE_EEC);
- if (reg & IXGBE_EEC_FLUDONE) {
- status = 0;
- break;
- }
- udelay(5);
- }
- return status;
-}
-
-/**
- * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to acquire
- *
- * Acquires the SWFW semaphore thought the SW_FW_SYNC register for
- * the specified function (CSR, PHY0, PHY1, NVM, Flash)
- **/
-static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
-{
- u32 swfw_sync;
- u32 swmask = mask;
- u32 fwmask = mask << 5;
- u32 hwmask = 0;
- u32 timeout = 200;
- u32 i;
-
- if (swmask == IXGBE_GSSR_EEP_SM)
- hwmask = IXGBE_GSSR_FLASH_SM;
-
- for (i = 0; i < timeout; i++) {
- /*
- * SW NVM semaphore bit is used for access to all
- * SW_FW_SYNC bits (not just NVM)
- */
- if (ixgbe_get_swfw_sync_semaphore(hw))
- return IXGBE_ERR_SWFW_SYNC;
-
- swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
- if (!(swfw_sync & (fwmask | swmask | hwmask))) {
- swfw_sync |= swmask;
- IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
- ixgbe_release_swfw_sync_semaphore(hw);
- break;
- } else {
- /*
- * Firmware currently using resource (fwmask),
- * hardware currently using resource (hwmask),
- * or other software thread currently using
- * resource (swmask)
- */
- ixgbe_release_swfw_sync_semaphore(hw);
- usleep_range(5000, 10000);
- }
- }
-
- /*
- * If the resource is not released by the FW/HW the SW can assume that
- * the FW/HW malfunctions. In that case the SW should sets the
- * SW bit(s) of the requested resource(s) while ignoring the
- * corresponding FW/HW bits in the SW_FW_SYNC register.
- */
- if (i >= timeout) {
- swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
- if (swfw_sync & (fwmask | hwmask)) {
- if (ixgbe_get_swfw_sync_semaphore(hw))
- return IXGBE_ERR_SWFW_SYNC;
-
- swfw_sync |= swmask;
- IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
- ixgbe_release_swfw_sync_semaphore(hw);
- }
- }
-
- usleep_range(5000, 10000);
- return 0;
-}
-
-/**
- * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore
- * @hw: pointer to hardware structure
- * @mask: Mask to specify which semaphore to release
- *
- * Releases the SWFW semaphore through the SW_FW_SYNC register
- * for the specified function (CSR, PHY0, PHY1, EVM, Flash)
- **/
-static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask)
-{
- u32 swfw_sync;
- u32 swmask = mask;
-
- ixgbe_get_swfw_sync_semaphore(hw);
-
- swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
- swfw_sync &= ~swmask;
- IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync);
-
- ixgbe_release_swfw_sync_semaphore(hw);
- usleep_range(5000, 10000);
-}
-
-/**
- * ixgbe_get_nvm_semaphore - Get hardware semaphore
- * @hw: pointer to hardware structure
- *
- * Sets the hardware semaphores so SW/FW can gain control of shared resources
- **/
-static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw)
-{
- s32 status = IXGBE_ERR_EEPROM;
- u32 timeout = 2000;
- u32 i;
- u32 swsm;
-
- /* Get SMBI software semaphore between device drivers first */
- for (i = 0; i < timeout; i++) {
- /*
- * If the SMBI bit is 0 when we read it, then the bit will be
- * set and we have the semaphore
- */
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
- if (!(swsm & IXGBE_SWSM_SMBI)) {
- status = 0;
- break;
- }
- udelay(50);
- }
-
- /* Now get the semaphore between SW/FW through the REGSMP bit */
- if (status) {
- for (i = 0; i < timeout; i++) {
- swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
- if (!(swsm & IXGBE_SWFW_REGSMP))
- break;
-
- udelay(50);
- }
- } else {
- hw_dbg(hw, "Software semaphore SMBI between device drivers "
- "not granted.\n");
- }
-
- return status;
-}
-
-/**
- * ixgbe_release_nvm_semaphore - Release hardware semaphore
- * @hw: pointer to hardware structure
- *
- * This function clears hardware semaphore bits.
- **/
-static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw)
-{
- u32 swsm;
-
- /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */
-
- swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
- swsm &= ~IXGBE_SWSM_SMBI;
- IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
-
- swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC);
- swsm &= ~IXGBE_SWFW_REGSMP;
- IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm);
-
- IXGBE_WRITE_FLUSH(hw);
-}
-
-/**
- * ixgbe_blink_led_start_X540 - Blink LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to blink
- *
- * Devices that implement the version 2 interface:
- * X540
- **/
-static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index)
-{
- u32 macc_reg;
- u32 ledctl_reg;
-
- /*
- * In order for the blink bit in the LED control register
- * to work, link and speed must be forced in the MAC. We
- * will reverse this when we stop the blinking.
- */
- macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
- macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS;
- IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
-
- /* Set the LED to LINK_UP + BLINK. */
- ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
- ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
- ledctl_reg |= IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-
-/**
- * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index.
- * @hw: pointer to hardware structure
- * @index: led number to stop blinking
- *
- * Devices that implement the version 2 interface:
- * X540
- **/
-static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index)
-{
- u32 macc_reg;
- u32 ledctl_reg;
-
- /* Restore the LED to its default value. */
- ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
- ledctl_reg &= ~IXGBE_LED_MODE_MASK(index);
- ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index);
- ledctl_reg &= ~IXGBE_LED_BLINK(index);
- IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg);
-
- /* Unforce link and speed in the MAC. */
- macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC);
- macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS);
- IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg);
- IXGBE_WRITE_FLUSH(hw);
-
- return 0;
-}
-static struct ixgbe_mac_operations mac_ops_X540 = {
- .init_hw = &ixgbe_init_hw_generic,
- .reset_hw = &ixgbe_reset_hw_X540,
- .start_hw = &ixgbe_start_hw_X540,
- .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic,
- .get_media_type = &ixgbe_get_media_type_X540,
- .get_supported_physical_layer =
- &ixgbe_get_supported_physical_layer_X540,
- .enable_rx_dma = &ixgbe_enable_rx_dma_generic,
- .get_mac_addr = &ixgbe_get_mac_addr_generic,
- .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic,
- .get_device_caps = &ixgbe_get_device_caps_generic,
- .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic,
- .stop_adapter = &ixgbe_stop_adapter_generic,
- .get_bus_info = &ixgbe_get_bus_info_generic,
- .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie,
- .read_analog_reg8 = NULL,
- .write_analog_reg8 = NULL,
- .setup_link = &ixgbe_setup_mac_link_X540,
- .set_rxpba = &ixgbe_set_rxpba_generic,
- .check_link = &ixgbe_check_mac_link_generic,
- .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic,
- .led_on = &ixgbe_led_on_generic,
- .led_off = &ixgbe_led_off_generic,
- .blink_led_start = &ixgbe_blink_led_start_X540,
- .blink_led_stop = &ixgbe_blink_led_stop_X540,
- .set_rar = &ixgbe_set_rar_generic,
- .clear_rar = &ixgbe_clear_rar_generic,
- .set_vmdq = &ixgbe_set_vmdq_generic,
- .clear_vmdq = &ixgbe_clear_vmdq_generic,
- .init_rx_addrs = &ixgbe_init_rx_addrs_generic,
- .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic,
- .enable_mc = &ixgbe_enable_mc_generic,
- .disable_mc = &ixgbe_disable_mc_generic,
- .clear_vfta = &ixgbe_clear_vfta_generic,
- .set_vfta = &ixgbe_set_vfta_generic,
- .fc_enable = &ixgbe_fc_enable_generic,
- .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic,
- .init_uta_tables = &ixgbe_init_uta_tables_generic,
- .setup_sfp = NULL,
- .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing,
- .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
- .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540,
- .release_swfw_sync = &ixgbe_release_swfw_sync_X540,
-};
-
-static struct ixgbe_eeprom_operations eeprom_ops_X540 = {
- .init_params = &ixgbe_init_eeprom_params_X540,
- .read = &ixgbe_read_eerd_X540,
- .read_buffer = &ixgbe_read_eerd_buffer_X540,
- .write = &ixgbe_write_eewr_X540,
- .write_buffer = &ixgbe_write_eewr_buffer_X540,
- .calc_checksum = &ixgbe_calc_eeprom_checksum_X540,
- .validate_checksum = &ixgbe_validate_eeprom_checksum_X540,
- .update_checksum = &ixgbe_update_eeprom_checksum_X540,
-};
-
-static struct ixgbe_phy_operations phy_ops_X540 = {
- .identify = &ixgbe_identify_phy_generic,
- .identify_sfp = &ixgbe_identify_sfp_module_generic,
- .init = NULL,
- .reset = NULL,
- .read_reg = &ixgbe_read_phy_reg_generic,
- .write_reg = &ixgbe_write_phy_reg_generic,
- .setup_link = &ixgbe_setup_phy_link_generic,
- .setup_link_speed = &ixgbe_setup_phy_link_speed_generic,
- .read_i2c_byte = &ixgbe_read_i2c_byte_generic,
- .write_i2c_byte = &ixgbe_write_i2c_byte_generic,
- .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic,
- .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic,
- .check_overtemp = &ixgbe_tn_check_overtemp,
-};
-
-struct ixgbe_info ixgbe_X540_info = {
- .mac = ixgbe_mac_X540,
- .get_invariants = &ixgbe_get_invariants_X540,
- .mac_ops = &mac_ops_X540,
- .eeprom_ops = &eeprom_ops_X540,
- .phy_ops = &phy_ops_X540,
- .mbx_ops = &mbx_ops_generic,
-};
+++ /dev/null
-################################################################################
-#
-# Intel 82599 Virtual Function driver
-# Copyright(c) 1999 - 2010 Intel Corporation.
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms and conditions of the GNU General Public License,
-# version 2, as published by the Free Software Foundation.
-#
-# This program is distributed in the hope it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-# more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc.,
-# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-#
-# The full GNU General Public License is included in this distribution in
-# the file called "COPYING".
-#
-# Contact Information:
-# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
-# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-#
-################################################################################
-
-#
-# Makefile for the Intel(R) 82599 VF ethernet driver
-#
-
-obj-$(CONFIG_IXGBEVF) += ixgbevf.o
-
-ixgbevf-objs := vf.o \
- mbx.o \
- ethtool.o \
- ixgbevf_main.o
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBEVF_DEFINES_H_
-#define _IXGBEVF_DEFINES_H_
-
-/* Device IDs */
-#define IXGBE_DEV_ID_82599_VF 0x10ED
-#define IXGBE_DEV_ID_X540_VF 0x1515
-
-#define IXGBE_VF_IRQ_CLEAR_MASK 7
-#define IXGBE_VF_MAX_TX_QUEUES 1
-#define IXGBE_VF_MAX_RX_QUEUES 1
-#define IXGBE_ETH_LENGTH_OF_ADDRESS 6
-
-/* Link speed */
-typedef u32 ixgbe_link_speed;
-#define IXGBE_LINK_SPEED_1GB_FULL 0x0020
-#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
-
-#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */
-#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
-#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */
-#define IXGBE_LINKS_UP 0x40000000
-#define IXGBE_LINKS_SPEED_82599 0x30000000
-#define IXGBE_LINKS_SPEED_10G_82599 0x30000000
-#define IXGBE_LINKS_SPEED_1G_82599 0x20000000
-
-/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
-#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8
-#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8
-#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024
-
-/* Interrupt Vector Allocation Registers */
-#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */
-
-#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */
-
-/* Receive Config masks */
-#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */
-#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */
-#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */
-#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */
-#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */
-#define IXGBE_RXDCTL_RLPML_EN 0x00008000
-
-/* DCA Control */
-#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */
-
-/* PSRTYPE bit definitions */
-#define IXGBE_PSRTYPE_TCPHDR 0x00000010
-#define IXGBE_PSRTYPE_UDPHDR 0x00000020
-#define IXGBE_PSRTYPE_IPV4HDR 0x00000100
-#define IXGBE_PSRTYPE_IPV6HDR 0x00000200
-#define IXGBE_PSRTYPE_L2HDR 0x00001000
-
-/* SRRCTL bit definitions */
-#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */
-#define IXGBE_SRRCTL_RDMTS_SHIFT 22
-#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000
-#define IXGBE_SRRCTL_DROP_EN 0x10000000
-#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F
-#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00
-#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
-#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
-#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
-#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000
-
-/* Receive Descriptor bit definitions */
-#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */
-#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */
-#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */
-#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */
-#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */
-#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004
-#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */
-#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */
-#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */
-#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */
-#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */
-#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */
-#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */
-#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */
-#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */
-#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */
-#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */
-#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */
-#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */
-#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */
-#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */
-#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */
-#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */
-#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */
-#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */
-#define IXGBE_RXDADV_ERR_MASK 0xFFF00000 /* RDESC.ERRORS mask */
-#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */
-#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */
-#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */
-#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */
-#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */
-#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */
-#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */
-#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */
-#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */
-#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */
-#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */
-#define IXGBE_RXD_PRI_SHIFT 13
-#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */
-#define IXGBE_RXD_CFI_SHIFT 12
-
-#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */
-#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */
-#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */
-#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */
-#define IXGBE_RXDADV_STAT_MASK 0x000FFFFF /* Stat/NEXTP: bit 0-19 */
-#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */
-#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */
-#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */
-#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */
-#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */
-#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */
-
-#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F
-#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0
-#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0
-#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0
-#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000
-#define IXGBE_RXDADV_RSCCNT_SHIFT 17
-#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5
-#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000
-#define IXGBE_RXDADV_SPH 0x8000
-
-#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
- IXGBE_RXD_ERR_CE | \
- IXGBE_RXD_ERR_LE | \
- IXGBE_RXD_ERR_PE | \
- IXGBE_RXD_ERR_OSE | \
- IXGBE_RXD_ERR_USE)
-
-#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
- IXGBE_RXDADV_ERR_CE | \
- IXGBE_RXDADV_ERR_LE | \
- IXGBE_RXDADV_ERR_PE | \
- IXGBE_RXDADV_ERR_OSE | \
- IXGBE_RXDADV_ERR_USE)
-
-#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */
-#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */
-#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */
-#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */
-#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */
-#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */
-#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */
-#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */
-#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */
-
-/* Transmit Descriptor - Advanced */
-union ixgbe_adv_tx_desc {
- struct {
- __le64 buffer_addr; /* Address of descriptor's data buf */
- __le32 cmd_type_len;
- __le32 olinfo_status;
- } read;
- struct {
- __le64 rsvd; /* Reserved */
- __le32 nxtseq_seed;
- __le32 status;
- } wb;
-};
-
-/* Receive Descriptor - Advanced */
-union ixgbe_adv_rx_desc {
- struct {
- __le64 pkt_addr; /* Packet buffer address */
- __le64 hdr_addr; /* Header buffer address */
- } read;
- struct {
- struct {
- union {
- __le32 data;
- struct {
- __le16 pkt_info; /* RSS, Pkt type */
- __le16 hdr_info; /* Splithdr, hdrlen */
- } hs_rss;
- } lo_dword;
- union {
- __le32 rss; /* RSS Hash */
- struct {
- __le16 ip_id; /* IP id */
- __le16 csum; /* Packet Checksum */
- } csum_ip;
- } hi_dword;
- } lower;
- struct {
- __le32 status_error; /* ext status/error */
- __le16 length; /* Packet length */
- __le16 vlan; /* VLAN tag */
- } upper;
- } wb; /* writeback */
-};
-
-/* Context descriptors */
-struct ixgbe_adv_tx_context_desc {
- __le32 vlan_macip_lens;
- __le32 seqnum_seed;
- __le32 type_tucmd_mlhl;
- __le32 mss_l4len_idx;
-};
-
-/* Adv Transmit Descriptor Config Masks */
-#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */
-#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */
-#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */
-#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */
-#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */
-#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */
-#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
-#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */
-#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */
-#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */
-#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */
-#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */
-#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */
-#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */
-#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */
-#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */
-#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */
-#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
-#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
- IXGBE_ADVTXD_POPTS_SHIFT)
-#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */
-#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */
-#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */
-#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */
-#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */
-
-/* Interrupt register bitmasks */
-
-/* Extended Interrupt Cause Read */
-#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */
-#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */
-#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */
-
-/* Extended Interrupt Cause Set */
-#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-/* Extended Interrupt Mask Set */
-#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-/* Extended Interrupt Mask Clear */
-#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
-#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */
-#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */
-
-#define IXGBE_EIMS_ENABLE_MASK ( \
- IXGBE_EIMS_RTX_QUEUE | \
- IXGBE_EIMS_MAILBOX | \
- IXGBE_EIMS_OTHER)
-
-#define IXGBE_EITR_CNT_WDIS 0x80000000
-
-/* Error Codes */
-#define IXGBE_ERR_INVALID_MAC_ADDR -1
-#define IXGBE_ERR_RESET_FAILED -2
-
-#endif /* _IXGBEVF_DEFINES_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2009 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-/* ethtool support for ixgbevf */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/ethtool.h>
-#include <linux/vmalloc.h>
-#include <linux/if_vlan.h>
-#include <linux/uaccess.h>
-
-#include "ixgbevf.h"
-
-#define IXGBE_ALL_RAR_ENTRIES 16
-
-#ifdef ETHTOOL_GSTATS
-struct ixgbe_stats {
- char stat_string[ETH_GSTRING_LEN];
- int sizeof_stat;
- int stat_offset;
- int base_stat_offset;
- int saved_reset_offset;
-};
-
-#define IXGBEVF_STAT(m, b, r) sizeof(((struct ixgbevf_adapter *)0)->m), \
- offsetof(struct ixgbevf_adapter, m), \
- offsetof(struct ixgbevf_adapter, b), \
- offsetof(struct ixgbevf_adapter, r)
-static struct ixgbe_stats ixgbe_gstrings_stats[] = {
- {"rx_packets", IXGBEVF_STAT(stats.vfgprc, stats.base_vfgprc,
- stats.saved_reset_vfgprc)},
- {"tx_packets", IXGBEVF_STAT(stats.vfgptc, stats.base_vfgptc,
- stats.saved_reset_vfgptc)},
- {"rx_bytes", IXGBEVF_STAT(stats.vfgorc, stats.base_vfgorc,
- stats.saved_reset_vfgorc)},
- {"tx_bytes", IXGBEVF_STAT(stats.vfgotc, stats.base_vfgotc,
- stats.saved_reset_vfgotc)},
- {"tx_busy", IXGBEVF_STAT(tx_busy, zero_base, zero_base)},
- {"multicast", IXGBEVF_STAT(stats.vfmprc, stats.base_vfmprc,
- stats.saved_reset_vfmprc)},
- {"rx_csum_offload_good", IXGBEVF_STAT(hw_csum_rx_good, zero_base,
- zero_base)},
- {"rx_csum_offload_errors", IXGBEVF_STAT(hw_csum_rx_error, zero_base,
- zero_base)},
- {"tx_csum_offload_ctxt", IXGBEVF_STAT(hw_csum_tx_good, zero_base,
- zero_base)},
- {"rx_header_split", IXGBEVF_STAT(rx_hdr_split, zero_base, zero_base)},
-};
-
-#define IXGBE_QUEUE_STATS_LEN 0
-#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats)
-
-#define IXGBEVF_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + IXGBE_QUEUE_STATS_LEN)
-#endif /* ETHTOOL_GSTATS */
-#ifdef ETHTOOL_TEST
-static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = {
- "Register test (offline)",
- "Link test (on/offline)"
-};
-#define IXGBE_TEST_LEN (sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN)
-#endif /* ETHTOOL_TEST */
-
-static int ixgbevf_get_settings(struct net_device *netdev,
- struct ethtool_cmd *ecmd)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed = 0;
- bool link_up;
-
- ecmd->supported = SUPPORTED_10000baseT_Full;
- ecmd->autoneg = AUTONEG_DISABLE;
- ecmd->transceiver = XCVR_DUMMY1;
- ecmd->port = -1;
-
- hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
-
- if (link_up) {
- ethtool_cmd_speed_set(
- ecmd,
- (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
- SPEED_10000 : SPEED_1000);
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ethtool_cmd_speed_set(ecmd, -1);
- ecmd->duplex = -1;
- }
-
- return 0;
-}
-
-static u32 ixgbevf_get_rx_csum(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- return adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED;
-}
-
-static int ixgbevf_set_rx_csum(struct net_device *netdev, u32 data)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- if (data)
- adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
- else
- adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED;
-
- if (netif_running(netdev)) {
- if (!adapter->dev_closed)
- ixgbevf_reinit_locked(adapter);
- } else {
- ixgbevf_reset(adapter);
- }
-
- return 0;
-}
-
-static int ixgbevf_set_tso(struct net_device *netdev, u32 data)
-{
- if (data) {
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- } else {
- netif_tx_stop_all_queues(netdev);
- netdev->features &= ~NETIF_F_TSO;
- netdev->features &= ~NETIF_F_TSO6;
- netif_tx_start_all_queues(netdev);
- }
- return 0;
-}
-
-static u32 ixgbevf_get_msglevel(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- return adapter->msg_enable;
-}
-
-static void ixgbevf_set_msglevel(struct net_device *netdev, u32 data)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- adapter->msg_enable = data;
-}
-
-#define IXGBE_GET_STAT(_A_, _R_) (_A_->stats._R_)
-
-static char *ixgbevf_reg_names[] = {
- "IXGBE_VFCTRL",
- "IXGBE_VFSTATUS",
- "IXGBE_VFLINKS",
- "IXGBE_VFRXMEMWRAP",
- "IXGBE_VFFRTIMER",
- "IXGBE_VTEICR",
- "IXGBE_VTEICS",
- "IXGBE_VTEIMS",
- "IXGBE_VTEIMC",
- "IXGBE_VTEIAC",
- "IXGBE_VTEIAM",
- "IXGBE_VTEITR",
- "IXGBE_VTIVAR",
- "IXGBE_VTIVAR_MISC",
- "IXGBE_VFRDBAL0",
- "IXGBE_VFRDBAL1",
- "IXGBE_VFRDBAH0",
- "IXGBE_VFRDBAH1",
- "IXGBE_VFRDLEN0",
- "IXGBE_VFRDLEN1",
- "IXGBE_VFRDH0",
- "IXGBE_VFRDH1",
- "IXGBE_VFRDT0",
- "IXGBE_VFRDT1",
- "IXGBE_VFRXDCTL0",
- "IXGBE_VFRXDCTL1",
- "IXGBE_VFSRRCTL0",
- "IXGBE_VFSRRCTL1",
- "IXGBE_VFPSRTYPE",
- "IXGBE_VFTDBAL0",
- "IXGBE_VFTDBAL1",
- "IXGBE_VFTDBAH0",
- "IXGBE_VFTDBAH1",
- "IXGBE_VFTDLEN0",
- "IXGBE_VFTDLEN1",
- "IXGBE_VFTDH0",
- "IXGBE_VFTDH1",
- "IXGBE_VFTDT0",
- "IXGBE_VFTDT1",
- "IXGBE_VFTXDCTL0",
- "IXGBE_VFTXDCTL1",
- "IXGBE_VFTDWBAL0",
- "IXGBE_VFTDWBAL1",
- "IXGBE_VFTDWBAH0",
- "IXGBE_VFTDWBAH1"
-};
-
-
-static int ixgbevf_get_regs_len(struct net_device *netdev)
-{
- return (ARRAY_SIZE(ixgbevf_reg_names)) * sizeof(u32);
-}
-
-static void ixgbevf_get_regs(struct net_device *netdev,
- struct ethtool_regs *regs,
- void *p)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 *regs_buff = p;
- u32 regs_len = ixgbevf_get_regs_len(netdev);
- u8 i;
-
- memset(p, 0, regs_len);
-
- regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id;
-
- /* General Registers */
- regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_VFCTRL);
- regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_VFSTATUS);
- regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
- regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_VFRXMEMWRAP);
- regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_VFFRTIMER);
-
- /* Interrupt */
- /* don't read EICR because it can clear interrupt causes, instead
- * read EICS which is a shadow but doesn't clear EICR */
- regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
- regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_VTEICS);
- regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_VTEIMS);
- regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_VTEIMC);
- regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_VTEIAC);
- regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_VTEIAM);
- regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_VTEITR(0));
- regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_VTIVAR(0));
- regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
-
- /* Receive DMA */
- for (i = 0; i < 2; i++)
- regs_buff[14 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAL(i));
- for (i = 0; i < 2; i++)
- regs_buff[16 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDBAH(i));
- for (i = 0; i < 2; i++)
- regs_buff[18 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDLEN(i));
- for (i = 0; i < 2; i++)
- regs_buff[20 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDH(i));
- for (i = 0; i < 2; i++)
- regs_buff[22 + i] = IXGBE_READ_REG(hw, IXGBE_VFRDT(i));
- for (i = 0; i < 2; i++)
- regs_buff[24 + i] = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
- for (i = 0; i < 2; i++)
- regs_buff[26 + i] = IXGBE_READ_REG(hw, IXGBE_VFSRRCTL(i));
-
- /* Receive */
- regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_VFPSRTYPE);
-
- /* Transmit */
- for (i = 0; i < 2; i++)
- regs_buff[29 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAL(i));
- for (i = 0; i < 2; i++)
- regs_buff[31 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDBAH(i));
- for (i = 0; i < 2; i++)
- regs_buff[33 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDLEN(i));
- for (i = 0; i < 2; i++)
- regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDH(i));
- for (i = 0; i < 2; i++)
- regs_buff[37 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDT(i));
- for (i = 0; i < 2; i++)
- regs_buff[39 + i] = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
- for (i = 0; i < 2; i++)
- regs_buff[41 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAL(i));
- for (i = 0; i < 2; i++)
- regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_VFTDWBAH(i));
-
- for (i = 0; i < ARRAY_SIZE(ixgbevf_reg_names); i++)
- hw_dbg(hw, "%s\t%8.8x\n", ixgbevf_reg_names[i], regs_buff[i]);
-}
-
-static void ixgbevf_get_drvinfo(struct net_device *netdev,
- struct ethtool_drvinfo *drvinfo)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- strlcpy(drvinfo->driver, ixgbevf_driver_name, 32);
- strlcpy(drvinfo->version, ixgbevf_driver_version, 32);
-
- strlcpy(drvinfo->fw_version, "N/A", 4);
- strlcpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
-}
-
-static void ixgbevf_get_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbevf_ring *tx_ring = adapter->tx_ring;
- struct ixgbevf_ring *rx_ring = adapter->rx_ring;
-
- ring->rx_max_pending = IXGBEVF_MAX_RXD;
- ring->tx_max_pending = IXGBEVF_MAX_TXD;
- ring->rx_mini_max_pending = 0;
- ring->rx_jumbo_max_pending = 0;
- ring->rx_pending = rx_ring->count;
- ring->tx_pending = tx_ring->count;
- ring->rx_mini_pending = 0;
- ring->rx_jumbo_pending = 0;
-}
-
-static int ixgbevf_set_ringparam(struct net_device *netdev,
- struct ethtool_ringparam *ring)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbevf_ring *tx_ring = NULL, *rx_ring = NULL;
- int i, err = 0;
- u32 new_rx_count, new_tx_count;
-
- if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
- return -EINVAL;
-
- new_rx_count = max(ring->rx_pending, (u32)IXGBEVF_MIN_RXD);
- new_rx_count = min(new_rx_count, (u32)IXGBEVF_MAX_RXD);
- new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE);
-
- new_tx_count = max(ring->tx_pending, (u32)IXGBEVF_MIN_TXD);
- new_tx_count = min(new_tx_count, (u32)IXGBEVF_MAX_TXD);
- new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE);
-
- if ((new_tx_count == adapter->tx_ring->count) &&
- (new_rx_count == adapter->rx_ring->count)) {
- /* nothing to do */
- return 0;
- }
-
- while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
- msleep(1);
-
- /*
- * If the adapter isn't up and running then just set the
- * new parameters and scurry for the exits.
- */
- if (!netif_running(adapter->netdev)) {
- for (i = 0; i < adapter->num_tx_queues; i++)
- adapter->tx_ring[i].count = new_tx_count;
- for (i = 0; i < adapter->num_rx_queues; i++)
- adapter->rx_ring[i].count = new_rx_count;
- adapter->tx_ring_count = new_tx_count;
- adapter->rx_ring_count = new_rx_count;
- goto clear_reset;
- }
-
- tx_ring = kcalloc(adapter->num_tx_queues,
- sizeof(struct ixgbevf_ring), GFP_KERNEL);
- if (!tx_ring) {
- err = -ENOMEM;
- goto clear_reset;
- }
-
- rx_ring = kcalloc(adapter->num_rx_queues,
- sizeof(struct ixgbevf_ring), GFP_KERNEL);
- if (!rx_ring) {
- err = -ENOMEM;
- goto err_rx_setup;
- }
-
- ixgbevf_down(adapter);
-
- memcpy(tx_ring, adapter->tx_ring,
- adapter->num_tx_queues * sizeof(struct ixgbevf_ring));
- for (i = 0; i < adapter->num_tx_queues; i++) {
- tx_ring[i].count = new_tx_count;
- err = ixgbevf_setup_tx_resources(adapter, &tx_ring[i]);
- if (err) {
- while (i) {
- i--;
- ixgbevf_free_tx_resources(adapter,
- &tx_ring[i]);
- }
- goto err_tx_ring_setup;
- }
- tx_ring[i].v_idx = adapter->tx_ring[i].v_idx;
- }
-
- memcpy(rx_ring, adapter->rx_ring,
- adapter->num_rx_queues * sizeof(struct ixgbevf_ring));
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rx_ring[i].count = new_rx_count;
- err = ixgbevf_setup_rx_resources(adapter, &rx_ring[i]);
- if (err) {
- while (i) {
- i--;
- ixgbevf_free_rx_resources(adapter,
- &rx_ring[i]);
- }
- goto err_rx_ring_setup;
- }
- rx_ring[i].v_idx = adapter->rx_ring[i].v_idx;
- }
-
- /*
- * Only switch to new rings if all the prior allocations
- * and ring setups have succeeded.
- */
- kfree(adapter->tx_ring);
- adapter->tx_ring = tx_ring;
- adapter->tx_ring_count = new_tx_count;
-
- kfree(adapter->rx_ring);
- adapter->rx_ring = rx_ring;
- adapter->rx_ring_count = new_rx_count;
-
- /* success! */
- ixgbevf_up(adapter);
-
- goto clear_reset;
-
-err_rx_ring_setup:
- for(i = 0; i < adapter->num_tx_queues; i++)
- ixgbevf_free_tx_resources(adapter, &tx_ring[i]);
-
-err_tx_ring_setup:
- kfree(rx_ring);
-
-err_rx_setup:
- kfree(tx_ring);
-
-clear_reset:
- clear_bit(__IXGBEVF_RESETTING, &adapter->state);
- return err;
-}
-
-static int ixgbevf_get_sset_count(struct net_device *dev, int stringset)
-{
- switch (stringset) {
- case ETH_SS_TEST:
- return IXGBE_TEST_LEN;
- case ETH_SS_STATS:
- return IXGBE_GLOBAL_STATS_LEN;
- default:
- return -EINVAL;
- }
-}
-
-static void ixgbevf_get_ethtool_stats(struct net_device *netdev,
- struct ethtool_stats *stats, u64 *data)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- int i;
-
- ixgbevf_update_stats(adapter);
- for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
- char *p = (char *)adapter +
- ixgbe_gstrings_stats[i].stat_offset;
- char *b = (char *)adapter +
- ixgbe_gstrings_stats[i].base_stat_offset;
- char *r = (char *)adapter +
- ixgbe_gstrings_stats[i].saved_reset_offset;
- data[i] = ((ixgbe_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)p : *(u32 *)p) -
- ((ixgbe_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)b : *(u32 *)b) +
- ((ixgbe_gstrings_stats[i].sizeof_stat ==
- sizeof(u64)) ? *(u64 *)r : *(u32 *)r);
- }
-}
-
-static void ixgbevf_get_strings(struct net_device *netdev, u32 stringset,
- u8 *data)
-{
- char *p = (char *)data;
- int i;
-
- switch (stringset) {
- case ETH_SS_TEST:
- memcpy(data, *ixgbe_gstrings_test,
- IXGBE_TEST_LEN * ETH_GSTRING_LEN);
- break;
- case ETH_SS_STATS:
- for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
- memcpy(p, ixgbe_gstrings_stats[i].stat_string,
- ETH_GSTRING_LEN);
- p += ETH_GSTRING_LEN;
- }
- break;
- }
-}
-
-static int ixgbevf_link_test(struct ixgbevf_adapter *adapter, u64 *data)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- bool link_up;
- u32 link_speed = 0;
- *data = 0;
-
- hw->mac.ops.check_link(hw, &link_speed, &link_up, true);
- if (!link_up)
- *data = 1;
-
- return *data;
-}
-
-/* ethtool register test data */
-struct ixgbevf_reg_test {
- u16 reg;
- u8 array_len;
- u8 test_type;
- u32 mask;
- u32 write;
-};
-
-/* In the hardware, registers are laid out either singly, in arrays
- * spaced 0x40 bytes apart, or in contiguous tables. We assume
- * most tests take place on arrays or single registers (handled
- * as a single-element array) and special-case the tables.
- * Table tests are always pattern tests.
- *
- * We also make provision for some required setup steps by specifying
- * registers to be written without any read-back testing.
- */
-
-#define PATTERN_TEST 1
-#define SET_READ_TEST 2
-#define WRITE_NO_TEST 3
-#define TABLE32_TEST 4
-#define TABLE64_TEST_LO 5
-#define TABLE64_TEST_HI 6
-
-/* default VF register test */
-static const struct ixgbevf_reg_test reg_test_vf[] = {
- { IXGBE_VFRDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 },
- { IXGBE_VFRDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_VFRDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFFFF },
- { IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE },
- { IXGBE_VFRDT(0), 2, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF },
- { IXGBE_VFRXDCTL(0), 2, WRITE_NO_TEST, 0, 0 },
- { IXGBE_VFTDBAL(0), 2, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF },
- { IXGBE_VFTDBAH(0), 2, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF },
- { IXGBE_VFTDLEN(0), 2, PATTERN_TEST, 0x000FFF80, 0x000FFF80 },
- { 0, 0, 0, 0 }
-};
-
-static const u32 register_test_patterns[] = {
- 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF
-};
-
-#define REG_PATTERN_TEST(R, M, W) \
-{ \
- u32 pat, val, before; \
- for (pat = 0; pat < ARRAY_SIZE(register_test_patterns); pat++) { \
- before = readl(adapter->hw.hw_addr + R); \
- writel((register_test_patterns[pat] & W), \
- (adapter->hw.hw_addr + R)); \
- val = readl(adapter->hw.hw_addr + R); \
- if (val != (register_test_patterns[pat] & W & M)) { \
- hw_dbg(&adapter->hw, \
- "pattern test reg %04X failed: got " \
- "0x%08X expected 0x%08X\n", \
- R, val, (register_test_patterns[pat] & W & M)); \
- *data = R; \
- writel(before, adapter->hw.hw_addr + R); \
- return 1; \
- } \
- writel(before, adapter->hw.hw_addr + R); \
- } \
-}
-
-#define REG_SET_AND_CHECK(R, M, W) \
-{ \
- u32 val, before; \
- before = readl(adapter->hw.hw_addr + R); \
- writel((W & M), (adapter->hw.hw_addr + R)); \
- val = readl(adapter->hw.hw_addr + R); \
- if ((W & M) != (val & M)) { \
- printk(KERN_ERR "set/check reg %04X test failed: got 0x%08X " \
- "expected 0x%08X\n", R, (val & M), (W & M)); \
- *data = R; \
- writel(before, (adapter->hw.hw_addr + R)); \
- return 1; \
- } \
- writel(before, (adapter->hw.hw_addr + R)); \
-}
-
-static int ixgbevf_reg_test(struct ixgbevf_adapter *adapter, u64 *data)
-{
- const struct ixgbevf_reg_test *test;
- u32 i;
-
- test = reg_test_vf;
-
- /*
- * Perform the register test, looping through the test table
- * until we either fail or reach the null entry.
- */
- while (test->reg) {
- for (i = 0; i < test->array_len; i++) {
- switch (test->test_type) {
- case PATTERN_TEST:
- REG_PATTERN_TEST(test->reg + (i * 0x40),
- test->mask,
- test->write);
- break;
- case SET_READ_TEST:
- REG_SET_AND_CHECK(test->reg + (i * 0x40),
- test->mask,
- test->write);
- break;
- case WRITE_NO_TEST:
- writel(test->write,
- (adapter->hw.hw_addr + test->reg)
- + (i * 0x40));
- break;
- case TABLE32_TEST:
- REG_PATTERN_TEST(test->reg + (i * 4),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_LO:
- REG_PATTERN_TEST(test->reg + (i * 8),
- test->mask,
- test->write);
- break;
- case TABLE64_TEST_HI:
- REG_PATTERN_TEST((test->reg + 4) + (i * 8),
- test->mask,
- test->write);
- break;
- }
- }
- test++;
- }
-
- *data = 0;
- return *data;
-}
-
-static void ixgbevf_diag_test(struct net_device *netdev,
- struct ethtool_test *eth_test, u64 *data)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- bool if_running = netif_running(netdev);
-
- set_bit(__IXGBEVF_TESTING, &adapter->state);
- if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
- /* Offline tests */
-
- hw_dbg(&adapter->hw, "offline testing starting\n");
-
- /* Link test performed before hardware reset so autoneg doesn't
- * interfere with test result */
- if (ixgbevf_link_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- if (if_running)
- /* indicate we're in test mode */
- dev_close(netdev);
- else
- ixgbevf_reset(adapter);
-
- hw_dbg(&adapter->hw, "register testing starting\n");
- if (ixgbevf_reg_test(adapter, &data[0]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- ixgbevf_reset(adapter);
-
- clear_bit(__IXGBEVF_TESTING, &adapter->state);
- if (if_running)
- dev_open(netdev);
- } else {
- hw_dbg(&adapter->hw, "online testing starting\n");
- /* Online tests */
- if (ixgbevf_link_test(adapter, &data[1]))
- eth_test->flags |= ETH_TEST_FL_FAILED;
-
- /* Online tests aren't run; pass by default */
- data[0] = 0;
-
- clear_bit(__IXGBEVF_TESTING, &adapter->state);
- }
- msleep_interruptible(4 * 1000);
-}
-
-static int ixgbevf_nway_reset(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- if (netif_running(netdev)) {
- if (!adapter->dev_closed)
- ixgbevf_reinit_locked(adapter);
- }
-
- return 0;
-}
-
-static struct ethtool_ops ixgbevf_ethtool_ops = {
- .get_settings = ixgbevf_get_settings,
- .get_drvinfo = ixgbevf_get_drvinfo,
- .get_regs_len = ixgbevf_get_regs_len,
- .get_regs = ixgbevf_get_regs,
- .nway_reset = ixgbevf_nway_reset,
- .get_link = ethtool_op_get_link,
- .get_ringparam = ixgbevf_get_ringparam,
- .set_ringparam = ixgbevf_set_ringparam,
- .get_rx_csum = ixgbevf_get_rx_csum,
- .set_rx_csum = ixgbevf_set_rx_csum,
- .get_tx_csum = ethtool_op_get_tx_csum,
- .set_tx_csum = ethtool_op_set_tx_ipv6_csum,
- .get_sg = ethtool_op_get_sg,
- .set_sg = ethtool_op_set_sg,
- .get_msglevel = ixgbevf_get_msglevel,
- .set_msglevel = ixgbevf_set_msglevel,
- .get_tso = ethtool_op_get_tso,
- .set_tso = ixgbevf_set_tso,
- .self_test = ixgbevf_diag_test,
- .get_sset_count = ixgbevf_get_sset_count,
- .get_strings = ixgbevf_get_strings,
- .get_ethtool_stats = ixgbevf_get_ethtool_stats,
-};
-
-void ixgbevf_set_ethtool_ops(struct net_device *netdev)
-{
- SET_ETHTOOL_OPS(netdev, &ixgbevf_ethtool_ops);
-}
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBEVF_H_
-#define _IXGBEVF_H_
-
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/netdevice.h>
-#include <linux/if_vlan.h>
-
-#include "vf.h"
-
-/* wrapper around a pointer to a socket buffer,
- * so a DMA handle can be stored along with the buffer */
-struct ixgbevf_tx_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- unsigned long time_stamp;
- u16 length;
- u16 next_to_watch;
- u16 mapped_as_page;
-};
-
-struct ixgbevf_rx_buffer {
- struct sk_buff *skb;
- dma_addr_t dma;
- struct page *page;
- dma_addr_t page_dma;
- unsigned int page_offset;
-};
-
-struct ixgbevf_ring {
- struct ixgbevf_adapter *adapter; /* backlink */
- void *desc; /* descriptor ring memory */
- dma_addr_t dma; /* phys. address of descriptor ring */
- unsigned int size; /* length in bytes */
- unsigned int count; /* amount of descriptors */
- unsigned int next_to_use;
- unsigned int next_to_clean;
-
- int queue_index; /* needed for multiqueue queue management */
- union {
- struct ixgbevf_tx_buffer *tx_buffer_info;
- struct ixgbevf_rx_buffer *rx_buffer_info;
- };
-
- u16 head;
- u16 tail;
-
- unsigned int total_bytes;
- unsigned int total_packets;
-
- u16 reg_idx; /* holds the special value that gets the hardware register
- * offset associated with this ring, which is different
- * for DCB and RSS modes */
-
-#if defined(CONFIG_DCA) || defined(CONFIG_DCA_MODULE)
- /* cpu for tx queue */
- int cpu;
-#endif
-
- u64 v_idx; /* maps directly to the index for this ring in the hardware
- * vector array, can also be used for finding the bit in EICR
- * and friends that represents the vector for this ring */
-
- u16 work_limit; /* max work per interrupt */
- u16 rx_buf_len;
-};
-
-enum ixgbevf_ring_f_enum {
- RING_F_NONE = 0,
- RING_F_ARRAY_SIZE /* must be last in enum set */
-};
-
-struct ixgbevf_ring_feature {
- int indices;
- int mask;
-};
-
-/* How many Rx Buffers do we bundle into one write to the hardware ? */
-#define IXGBEVF_RX_BUFFER_WRITE 16 /* Must be power of 2 */
-
-#define MAX_RX_QUEUES 1
-#define MAX_TX_QUEUES 1
-
-#define IXGBEVF_DEFAULT_TXD 1024
-#define IXGBEVF_DEFAULT_RXD 512
-#define IXGBEVF_MAX_TXD 4096
-#define IXGBEVF_MIN_TXD 64
-#define IXGBEVF_MAX_RXD 4096
-#define IXGBEVF_MIN_RXD 64
-
-/* Supported Rx Buffer Sizes */
-#define IXGBEVF_RXBUFFER_64 64 /* Used for packet split */
-#define IXGBEVF_RXBUFFER_128 128 /* Used for packet split */
-#define IXGBEVF_RXBUFFER_256 256 /* Used for packet split */
-#define IXGBEVF_RXBUFFER_2048 2048
-#define IXGBEVF_MAX_RXBUFFER 16384 /* largest size for single descriptor */
-
-#define IXGBEVF_RX_HDR_SIZE IXGBEVF_RXBUFFER_256
-
-#define MAXIMUM_ETHERNET_VLAN_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN)
-
-#define IXGBE_TX_FLAGS_CSUM (u32)(1)
-#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1)
-#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2)
-#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3)
-#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 4)
-#define IXGBE_TX_FLAGS_FSO (u32)(1 << 5)
-#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
-#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
-#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
-
-/* MAX_MSIX_Q_VECTORS of these are allocated,
- * but we only use one per queue-specific vector.
- */
-struct ixgbevf_q_vector {
- struct ixgbevf_adapter *adapter;
- struct napi_struct napi;
- DECLARE_BITMAP(rxr_idx, MAX_RX_QUEUES); /* Rx ring indices */
- DECLARE_BITMAP(txr_idx, MAX_TX_QUEUES); /* Tx ring indices */
- u8 rxr_count; /* Rx ring count assigned to this vector */
- u8 txr_count; /* Tx ring count assigned to this vector */
- u8 tx_itr;
- u8 rx_itr;
- u32 eitr;
- int v_idx; /* vector index in list */
-};
-
-/* Helper macros to switch between ints/sec and what the register uses.
- * And yes, it's the same math going both ways. The lowest value
- * supported by all of the ixgbe hardware is 8.
- */
-#define EITR_INTS_PER_SEC_TO_REG(_eitr) \
- ((_eitr) ? (1000000000 / ((_eitr) * 256)) : 8)
-#define EITR_REG_TO_INTS_PER_SEC EITR_INTS_PER_SEC_TO_REG
-
-#define IXGBE_DESC_UNUSED(R) \
- ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \
- (R)->next_to_clean - (R)->next_to_use - 1)
-
-#define IXGBE_RX_DESC_ADV(R, i) \
- (&(((union ixgbe_adv_rx_desc *)((R).desc))[i]))
-#define IXGBE_TX_DESC_ADV(R, i) \
- (&(((union ixgbe_adv_tx_desc *)((R).desc))[i]))
-#define IXGBE_TX_CTXTDESC_ADV(R, i) \
- (&(((struct ixgbe_adv_tx_context_desc *)((R).desc))[i]))
-
-#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128
-
-#define OTHER_VECTOR 1
-#define NON_Q_VECTORS (OTHER_VECTOR)
-
-#define MAX_MSIX_Q_VECTORS 2
-#define MAX_MSIX_COUNT 2
-
-#define MIN_MSIX_Q_VECTORS 2
-#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
-
-/* board specific private data structure */
-struct ixgbevf_adapter {
- struct timer_list watchdog_timer;
- unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)];
- u16 bd_number;
- struct work_struct reset_task;
- struct ixgbevf_q_vector *q_vector[MAX_MSIX_Q_VECTORS];
- char name[MAX_MSIX_COUNT][IFNAMSIZ + 9];
-
- /* Interrupt Throttle Rate */
- u32 itr_setting;
- u16 eitr_low;
- u16 eitr_high;
-
- /* TX */
- struct ixgbevf_ring *tx_ring; /* One per active queue */
- int num_tx_queues;
- u64 restart_queue;
- u64 hw_csum_tx_good;
- u64 lsc_int;
- u64 hw_tso_ctxt;
- u64 hw_tso6_ctxt;
- u32 tx_timeout_count;
-
- /* RX */
- struct ixgbevf_ring *rx_ring; /* One per active queue */
- int num_rx_queues;
- int num_rx_pools; /* == num_rx_queues in 82598 */
- int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */
- u64 hw_csum_rx_error;
- u64 hw_rx_no_dma_resources;
- u64 hw_csum_rx_good;
- u64 non_eop_descs;
- int num_msix_vectors;
- int max_msix_q_vectors; /* true count of q_vectors for device */
- struct ixgbevf_ring_feature ring_feature[RING_F_ARRAY_SIZE];
- struct msix_entry *msix_entries;
-
- u64 rx_hdr_split;
- u32 alloc_rx_page_failed;
- u32 alloc_rx_buff_failed;
-
- /* Some features need tri-state capability,
- * thus the additional *_CAPABLE flags.
- */
- u32 flags;
-#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1)
-#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 1)
-#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 2)
-#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 3)
-#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 4)
-#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 5)
-#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 6)
-#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 7)
-#define IXGBE_FLAG_IN_WATCHDOG_TASK (u32)(1 << 8)
- /* OS defined structs */
- struct net_device *netdev;
- struct pci_dev *pdev;
-
- /* structs defined in ixgbe_vf.h */
- struct ixgbe_hw hw;
- u16 msg_enable;
- struct ixgbevf_hw_stats stats;
- u64 zero_base;
- /* Interrupt Throttle Rate */
- u32 eitr_param;
-
- unsigned long state;
- u32 *config_space;
- u64 tx_busy;
- unsigned int tx_ring_count;
- unsigned int rx_ring_count;
-
- u32 link_speed;
- bool link_up;
- unsigned long link_check_timeout;
-
- struct work_struct watchdog_task;
- bool netdev_registered;
- bool dev_closed;
-};
-
-enum ixbgevf_state_t {
- __IXGBEVF_TESTING,
- __IXGBEVF_RESETTING,
- __IXGBEVF_DOWN
-};
-
-enum ixgbevf_boards {
- board_82599_vf,
- board_X540_vf,
-};
-
-extern struct ixgbevf_info ixgbevf_82599_vf_info;
-extern struct ixgbevf_info ixgbevf_X540_vf_info;
-extern struct ixgbe_mbx_operations ixgbevf_mbx_ops;
-
-/* needed by ethtool.c */
-extern char ixgbevf_driver_name[];
-extern const char ixgbevf_driver_version[];
-
-extern int ixgbevf_up(struct ixgbevf_adapter *adapter);
-extern void ixgbevf_down(struct ixgbevf_adapter *adapter);
-extern void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter);
-extern void ixgbevf_reset(struct ixgbevf_adapter *adapter);
-extern void ixgbevf_set_ethtool_ops(struct net_device *netdev);
-extern int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *,
- struct ixgbevf_ring *);
-extern int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *,
- struct ixgbevf_ring *);
-extern void ixgbevf_free_rx_resources(struct ixgbevf_adapter *,
- struct ixgbevf_ring *);
-extern void ixgbevf_free_tx_resources(struct ixgbevf_adapter *,
- struct ixgbevf_ring *);
-extern void ixgbevf_update_stats(struct ixgbevf_adapter *adapter);
-
-#ifdef ETHTOOL_OPS_COMPAT
-extern int ethtool_ioctl(struct ifreq *ifr);
-
-#endif
-extern void ixgbe_napi_add_all(struct ixgbevf_adapter *adapter);
-extern void ixgbe_napi_del_all(struct ixgbevf_adapter *adapter);
-
-#ifdef DEBUG
-extern char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw);
-#define hw_dbg(hw, format, arg...) \
- printk(KERN_DEBUG "%s: " format, ixgbevf_get_hw_dev_name(hw), ##arg)
-#else
-#define hw_dbg(hw, format, arg...) do {} while (0)
-#endif
-
-#endif /* _IXGBEVF_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-
-/******************************************************************************
- Copyright (c)2006 - 2007 Myricom, Inc. for some LRO specific code
-******************************************************************************/
-#include <linux/types.h>
-#include <linux/bitops.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/string.h>
-#include <linux/in.h>
-#include <linux/ip.h>
-#include <linux/tcp.h>
-#include <linux/ipv6.h>
-#include <linux/slab.h>
-#include <net/checksum.h>
-#include <net/ip6_checksum.h>
-#include <linux/ethtool.h>
-#include <linux/if_vlan.h>
-#include <linux/prefetch.h>
-
-#include "ixgbevf.h"
-
-char ixgbevf_driver_name[] = "ixgbevf";
-static const char ixgbevf_driver_string[] =
- "Intel(R) 10 Gigabit PCI Express Virtual Function Network Driver";
-
-#define DRV_VERSION "2.1.0-k"
-const char ixgbevf_driver_version[] = DRV_VERSION;
-static char ixgbevf_copyright[] =
- "Copyright (c) 2009 - 2010 Intel Corporation.";
-
-static const struct ixgbevf_info *ixgbevf_info_tbl[] = {
- [board_82599_vf] = &ixgbevf_82599_vf_info,
- [board_X540_vf] = &ixgbevf_X540_vf_info,
-};
-
-/* ixgbevf_pci_tbl - PCI Device ID Table
- *
- * Wildcard entries (PCI_ANY_ID) should come last
- * Last entry must be all 0s
- *
- * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
- * Class, Class Mask, private data (not used) }
- */
-static struct pci_device_id ixgbevf_pci_tbl[] = {
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_VF),
- board_82599_vf},
- {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540_VF),
- board_X540_vf},
-
- /* required last entry */
- {0, }
-};
-MODULE_DEVICE_TABLE(pci, ixgbevf_pci_tbl);
-
-MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>");
-MODULE_DESCRIPTION("Intel(R) 82599 Virtual Function Driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(DRV_VERSION);
-
-#define DEFAULT_DEBUG_LEVEL_SHIFT 3
-
-/* forward decls */
-static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector);
-static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
- u32 itr_reg);
-
-static inline void ixgbevf_release_rx_desc(struct ixgbe_hw *hw,
- struct ixgbevf_ring *rx_ring,
- u32 val)
-{
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
- IXGBE_WRITE_REG(hw, IXGBE_VFRDT(rx_ring->reg_idx), val);
-}
-
-/*
- * ixgbevf_set_ivar - set IVAR registers - maps interrupt causes to vectors
- * @adapter: pointer to adapter struct
- * @direction: 0 for Rx, 1 for Tx, -1 for other causes
- * @queue: queue to map the corresponding interrupt to
- * @msix_vector: the vector to map to the corresponding queue
- *
- */
-static void ixgbevf_set_ivar(struct ixgbevf_adapter *adapter, s8 direction,
- u8 queue, u8 msix_vector)
-{
- u32 ivar, index;
- struct ixgbe_hw *hw = &adapter->hw;
- if (direction == -1) {
- /* other causes */
- msix_vector |= IXGBE_IVAR_ALLOC_VAL;
- ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR_MISC);
- ivar &= ~0xFF;
- ivar |= msix_vector;
- IXGBE_WRITE_REG(hw, IXGBE_VTIVAR_MISC, ivar);
- } else {
- /* tx or rx causes */
- msix_vector |= IXGBE_IVAR_ALLOC_VAL;
- index = ((16 * (queue & 1)) + (8 * direction));
- ivar = IXGBE_READ_REG(hw, IXGBE_VTIVAR(queue >> 1));
- ivar &= ~(0xFF << index);
- ivar |= (msix_vector << index);
- IXGBE_WRITE_REG(hw, IXGBE_VTIVAR(queue >> 1), ivar);
- }
-}
-
-static void ixgbevf_unmap_and_free_tx_resource(struct ixgbevf_adapter *adapter,
- struct ixgbevf_tx_buffer
- *tx_buffer_info)
-{
- if (tx_buffer_info->dma) {
- if (tx_buffer_info->mapped_as_page)
- dma_unmap_page(&adapter->pdev->dev,
- tx_buffer_info->dma,
- tx_buffer_info->length,
- DMA_TO_DEVICE);
- else
- dma_unmap_single(&adapter->pdev->dev,
- tx_buffer_info->dma,
- tx_buffer_info->length,
- DMA_TO_DEVICE);
- tx_buffer_info->dma = 0;
- }
- if (tx_buffer_info->skb) {
- dev_kfree_skb_any(tx_buffer_info->skb);
- tx_buffer_info->skb = NULL;
- }
- tx_buffer_info->time_stamp = 0;
- /* tx_buffer_info must be completely set up in the transmit path */
-}
-
-#define IXGBE_MAX_TXD_PWR 14
-#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR)
-
-/* Tx Descriptors needed, worst case */
-#define TXD_USE_COUNT(S) (((S) >> IXGBE_MAX_TXD_PWR) + \
- (((S) & (IXGBE_MAX_DATA_PER_TXD - 1)) ? 1 : 0))
-#ifdef MAX_SKB_FRAGS
-#define DESC_NEEDED (TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD) /* skb->data */ + \
- MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE) + 1) /* for context */
-#else
-#define DESC_NEEDED TXD_USE_COUNT(IXGBE_MAX_DATA_PER_TXD)
-#endif
-
-static void ixgbevf_tx_timeout(struct net_device *netdev);
-
-/**
- * ixgbevf_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
- * @tx_ring: tx ring to clean
- **/
-static bool ixgbevf_clean_tx_irq(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- union ixgbe_adv_tx_desc *tx_desc, *eop_desc;
- struct ixgbevf_tx_buffer *tx_buffer_info;
- unsigned int i, eop, count = 0;
- unsigned int total_bytes = 0, total_packets = 0;
-
- i = tx_ring->next_to_clean;
- eop = tx_ring->tx_buffer_info[i].next_to_watch;
- eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
-
- while ((eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)) &&
- (count < tx_ring->work_limit)) {
- bool cleaned = false;
- rmb(); /* read buffer_info after eop_desc */
- for ( ; !cleaned; count++) {
- struct sk_buff *skb;
- tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- cleaned = (i == eop);
- skb = tx_buffer_info->skb;
-
- if (cleaned && skb) {
- unsigned int segs, bytecount;
-
- /* gso_segs is currently only valid for tcp */
- segs = skb_shinfo(skb)->gso_segs ?: 1;
- /* multiply data chunks by size of headers */
- bytecount = ((segs - 1) * skb_headlen(skb)) +
- skb->len;
- total_packets += segs;
- total_bytes += bytecount;
- }
-
- ixgbevf_unmap_and_free_tx_resource(adapter,
- tx_buffer_info);
-
- tx_desc->wb.status = 0;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- eop = tx_ring->tx_buffer_info[i].next_to_watch;
- eop_desc = IXGBE_TX_DESC_ADV(*tx_ring, eop);
- }
-
- tx_ring->next_to_clean = i;
-
-#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
- if (unlikely(count && netif_carrier_ok(netdev) &&
- (IXGBE_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
- /* Make sure that anybody stopping the queue after this
- * sees the new next_to_clean.
- */
- smp_mb();
-#ifdef HAVE_TX_MQ
- if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
- !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
- netif_wake_subqueue(netdev, tx_ring->queue_index);
- ++adapter->restart_queue;
- }
-#else
- if (netif_queue_stopped(netdev) &&
- !test_bit(__IXGBEVF_DOWN, &adapter->state)) {
- netif_wake_queue(netdev);
- ++adapter->restart_queue;
- }
-#endif
- }
-
- /* re-arm the interrupt */
- if ((count >= tx_ring->work_limit) &&
- (!test_bit(__IXGBEVF_DOWN, &adapter->state))) {
- IXGBE_WRITE_REG(hw, IXGBE_VTEICS, tx_ring->v_idx);
- }
-
- tx_ring->total_bytes += total_bytes;
- tx_ring->total_packets += total_packets;
-
- netdev->stats.tx_bytes += total_bytes;
- netdev->stats.tx_packets += total_packets;
-
- return count < tx_ring->work_limit;
-}
-
-/**
- * ixgbevf_receive_skb - Send a completed packet up the stack
- * @q_vector: structure containing interrupt and ring information
- * @skb: packet to send up
- * @status: hardware indication of status of receive
- * @rx_ring: rx descriptor ring (for a specific queue) to setup
- * @rx_desc: rx descriptor
- **/
-static void ixgbevf_receive_skb(struct ixgbevf_q_vector *q_vector,
- struct sk_buff *skb, u8 status,
- struct ixgbevf_ring *ring,
- union ixgbe_adv_rx_desc *rx_desc)
-{
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- bool is_vlan = (status & IXGBE_RXD_STAT_VP);
-
- if (is_vlan) {
- u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan);
-
- __vlan_hwaccel_put_tag(skb, tag);
- }
-
- if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL))
- napi_gro_receive(&q_vector->napi, skb);
- else
- netif_rx(skb);
-}
-
-/**
- * ixgbevf_rx_checksum - indicate in skb if hw indicated a good cksum
- * @adapter: address of board private structure
- * @status_err: hardware indication of status of receive
- * @skb: skb currently being received and modified
- **/
-static inline void ixgbevf_rx_checksum(struct ixgbevf_adapter *adapter,
- u32 status_err, struct sk_buff *skb)
-{
- skb_checksum_none_assert(skb);
-
- /* Rx csum disabled */
- if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED))
- return;
-
- /* if IP and error */
- if ((status_err & IXGBE_RXD_STAT_IPCS) &&
- (status_err & IXGBE_RXDADV_ERR_IPE)) {
- adapter->hw_csum_rx_error++;
- return;
- }
-
- if (!(status_err & IXGBE_RXD_STAT_L4CS))
- return;
-
- if (status_err & IXGBE_RXDADV_ERR_TCPE) {
- adapter->hw_csum_rx_error++;
- return;
- }
-
- /* It must be a TCP or UDP packet with a valid checksum */
- skb->ip_summed = CHECKSUM_UNNECESSARY;
- adapter->hw_csum_rx_good++;
-}
-
-/**
- * ixgbevf_alloc_rx_buffers - Replace used receive buffers; packet split
- * @adapter: address of board private structure
- **/
-static void ixgbevf_alloc_rx_buffers(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *rx_ring,
- int cleaned_count)
-{
- struct pci_dev *pdev = adapter->pdev;
- union ixgbe_adv_rx_desc *rx_desc;
- struct ixgbevf_rx_buffer *bi;
- struct sk_buff *skb;
- unsigned int i;
- unsigned int bufsz = rx_ring->rx_buf_len + NET_IP_ALIGN;
-
- i = rx_ring->next_to_use;
- bi = &rx_ring->rx_buffer_info[i];
-
- while (cleaned_count--) {
- rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
-
- if (!bi->page_dma &&
- (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED)) {
- if (!bi->page) {
- bi->page = netdev_alloc_page(adapter->netdev);
- if (!bi->page) {
- adapter->alloc_rx_page_failed++;
- goto no_buffers;
- }
- bi->page_offset = 0;
- } else {
- /* use a half page if we're re-using */
- bi->page_offset ^= (PAGE_SIZE / 2);
- }
-
- bi->page_dma = dma_map_page(&pdev->dev, bi->page,
- bi->page_offset,
- (PAGE_SIZE / 2),
- DMA_FROM_DEVICE);
- }
-
- skb = bi->skb;
- if (!skb) {
- skb = netdev_alloc_skb(adapter->netdev,
- bufsz);
-
- if (!skb) {
- adapter->alloc_rx_buff_failed++;
- goto no_buffers;
- }
-
- /*
- * Make buffer alignment 2 beyond a 16 byte boundary
- * this will result in a 16 byte aligned IP header after
- * the 14 byte MAC header is removed
- */
- skb_reserve(skb, NET_IP_ALIGN);
-
- bi->skb = skb;
- }
- if (!bi->dma) {
- bi->dma = dma_map_single(&pdev->dev, skb->data,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- }
- /* Refresh the desc even if buffer_addrs didn't change because
- * each write-back erases this info. */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma);
- rx_desc->read.hdr_addr = cpu_to_le64(bi->dma);
- } else {
- rx_desc->read.pkt_addr = cpu_to_le64(bi->dma);
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
- bi = &rx_ring->rx_buffer_info[i];
- }
-
-no_buffers:
- if (rx_ring->next_to_use != i) {
- rx_ring->next_to_use = i;
- if (i-- == 0)
- i = (rx_ring->count - 1);
-
- ixgbevf_release_rx_desc(&adapter->hw, rx_ring, i);
- }
-}
-
-static inline void ixgbevf_irq_enable_queues(struct ixgbevf_adapter *adapter,
- u64 qmask)
-{
- u32 mask;
- struct ixgbe_hw *hw = &adapter->hw;
-
- mask = (qmask & 0xFFFFFFFF);
- IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
-}
-
-static inline u16 ixgbevf_get_hdr_info(union ixgbe_adv_rx_desc *rx_desc)
-{
- return rx_desc->wb.lower.lo_dword.hs_rss.hdr_info;
-}
-
-static inline u16 ixgbevf_get_pkt_info(union ixgbe_adv_rx_desc *rx_desc)
-{
- return rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
-}
-
-static bool ixgbevf_clean_rx_irq(struct ixgbevf_q_vector *q_vector,
- struct ixgbevf_ring *rx_ring,
- int *work_done, int work_to_do)
-{
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- struct pci_dev *pdev = adapter->pdev;
- union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
- struct ixgbevf_rx_buffer *rx_buffer_info, *next_buffer;
- struct sk_buff *skb;
- unsigned int i;
- u32 len, staterr;
- u16 hdr_info;
- bool cleaned = false;
- int cleaned_count = 0;
- unsigned int total_rx_bytes = 0, total_rx_packets = 0;
-
- i = rx_ring->next_to_clean;
- rx_desc = IXGBE_RX_DESC_ADV(*rx_ring, i);
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
-
- while (staterr & IXGBE_RXD_STAT_DD) {
- u32 upper_len = 0;
- if (*work_done >= work_to_do)
- break;
- (*work_done)++;
-
- rmb(); /* read descriptor and rx_buffer_info after status DD */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- hdr_info = le16_to_cpu(ixgbevf_get_hdr_info(rx_desc));
- len = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
- IXGBE_RXDADV_HDRBUFLEN_SHIFT;
- if (hdr_info & IXGBE_RXDADV_SPH)
- adapter->rx_hdr_split++;
- if (len > IXGBEVF_RX_HDR_SIZE)
- len = IXGBEVF_RX_HDR_SIZE;
- upper_len = le16_to_cpu(rx_desc->wb.upper.length);
- } else {
- len = le16_to_cpu(rx_desc->wb.upper.length);
- }
- cleaned = true;
- skb = rx_buffer_info->skb;
- prefetch(skb->data - NET_IP_ALIGN);
- rx_buffer_info->skb = NULL;
-
- if (rx_buffer_info->dma) {
- dma_unmap_single(&pdev->dev, rx_buffer_info->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- rx_buffer_info->dma = 0;
- skb_put(skb, len);
- }
-
- if (upper_len) {
- dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
- PAGE_SIZE / 2, DMA_FROM_DEVICE);
- rx_buffer_info->page_dma = 0;
- skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags,
- rx_buffer_info->page,
- rx_buffer_info->page_offset,
- upper_len);
-
- if ((rx_ring->rx_buf_len > (PAGE_SIZE / 2)) ||
- (page_count(rx_buffer_info->page) != 1))
- rx_buffer_info->page = NULL;
- else
- get_page(rx_buffer_info->page);
-
- skb->len += upper_len;
- skb->data_len += upper_len;
- skb->truesize += upper_len;
- }
-
- i++;
- if (i == rx_ring->count)
- i = 0;
-
- next_rxd = IXGBE_RX_DESC_ADV(*rx_ring, i);
- prefetch(next_rxd);
- cleaned_count++;
-
- next_buffer = &rx_ring->rx_buffer_info[i];
-
- if (!(staterr & IXGBE_RXD_STAT_EOP)) {
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- rx_buffer_info->skb = next_buffer->skb;
- rx_buffer_info->dma = next_buffer->dma;
- next_buffer->skb = skb;
- next_buffer->dma = 0;
- } else {
- skb->next = next_buffer->skb;
- skb->next->prev = skb;
- }
- adapter->non_eop_descs++;
- goto next_desc;
- }
-
- /* ERR_MASK will only have valid bits if EOP set */
- if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) {
- dev_kfree_skb_irq(skb);
- goto next_desc;
- }
-
- ixgbevf_rx_checksum(adapter, staterr, skb);
-
- /* probably a little skewed due to removing CRC */
- total_rx_bytes += skb->len;
- total_rx_packets++;
-
- /*
- * Work around issue of some types of VM to VM loop back
- * packets not getting split correctly
- */
- if (staterr & IXGBE_RXD_STAT_LB) {
- u32 header_fixup_len = skb_headlen(skb);
- if (header_fixup_len < 14)
- skb_push(skb, header_fixup_len);
- }
- skb->protocol = eth_type_trans(skb, adapter->netdev);
-
- ixgbevf_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc);
-
-next_desc:
- rx_desc->wb.upper.status_error = 0;
-
- /* return some buffers to hardware, one at a time is too slow */
- if (cleaned_count >= IXGBEVF_RX_BUFFER_WRITE) {
- ixgbevf_alloc_rx_buffers(adapter, rx_ring,
- cleaned_count);
- cleaned_count = 0;
- }
-
- /* use prefetched values */
- rx_desc = next_rxd;
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
-
- staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
- }
-
- rx_ring->next_to_clean = i;
- cleaned_count = IXGBE_DESC_UNUSED(rx_ring);
-
- if (cleaned_count)
- ixgbevf_alloc_rx_buffers(adapter, rx_ring, cleaned_count);
-
- rx_ring->total_packets += total_rx_packets;
- rx_ring->total_bytes += total_rx_bytes;
- adapter->netdev->stats.rx_bytes += total_rx_bytes;
- adapter->netdev->stats.rx_packets += total_rx_packets;
-
- return cleaned;
-}
-
-/**
- * ixgbevf_clean_rxonly - msix (aka one shot) rx clean routine
- * @napi: napi struct with our devices info in it
- * @budget: amount of work driver is allowed to do this pass, in packets
- *
- * This function is optimized for cleaning one queue only on a single
- * q_vector!!!
- **/
-static int ixgbevf_clean_rxonly(struct napi_struct *napi, int budget)
-{
- struct ixgbevf_q_vector *q_vector =
- container_of(napi, struct ixgbevf_q_vector, napi);
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- struct ixgbevf_ring *rx_ring = NULL;
- int work_done = 0;
- long r_idx;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- rx_ring = &(adapter->rx_ring[r_idx]);
-
- ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
-
- /* If all Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->itr_setting & 1)
- ixgbevf_set_itr_msix(q_vector);
- if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
- ixgbevf_irq_enable_queues(adapter, rx_ring->v_idx);
- }
-
- return work_done;
-}
-
-/**
- * ixgbevf_clean_rxonly_many - msix (aka one shot) rx clean routine
- * @napi: napi struct with our devices info in it
- * @budget: amount of work driver is allowed to do this pass, in packets
- *
- * This function will clean more than one rx queue associated with a
- * q_vector.
- **/
-static int ixgbevf_clean_rxonly_many(struct napi_struct *napi, int budget)
-{
- struct ixgbevf_q_vector *q_vector =
- container_of(napi, struct ixgbevf_q_vector, napi);
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- struct ixgbevf_ring *rx_ring = NULL;
- int work_done = 0, i;
- long r_idx;
- u64 enable_mask = 0;
-
- /* attempt to distribute budget to each queue fairly, but don't allow
- * the budget to go below 1 because we'll exit polling */
- budget /= (q_vector->rxr_count ?: 1);
- budget = max(budget, 1);
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- ixgbevf_clean_rx_irq(q_vector, rx_ring, &work_done, budget);
- enable_mask |= rx_ring->v_idx;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
-#ifndef HAVE_NETDEV_NAPI_LIST
- if (!netif_running(adapter->netdev))
- work_done = 0;
-
-#endif
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- rx_ring = &(adapter->rx_ring[r_idx]);
-
- /* If all Rx work done, exit the polling mode */
- if (work_done < budget) {
- napi_complete(napi);
- if (adapter->itr_setting & 1)
- ixgbevf_set_itr_msix(q_vector);
- if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
- ixgbevf_irq_enable_queues(adapter, enable_mask);
- }
-
- return work_done;
-}
-
-
-/**
- * ixgbevf_configure_msix - Configure MSI-X hardware
- * @adapter: board private structure
- *
- * ixgbevf_configure_msix sets up the hardware to properly generate MSI-X
- * interrupts.
- **/
-static void ixgbevf_configure_msix(struct ixgbevf_adapter *adapter)
-{
- struct ixgbevf_q_vector *q_vector;
- struct ixgbe_hw *hw = &adapter->hw;
- int i, j, q_vectors, v_idx, r_idx;
- u32 mask;
-
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /*
- * Populate the IVAR table and set the ITR values to the
- * corresponding register.
- */
- for (v_idx = 0; v_idx < q_vectors; v_idx++) {
- q_vector = adapter->q_vector[v_idx];
- /* XXX for_each_set_bit(...) */
- r_idx = find_first_bit(q_vector->rxr_idx,
- adapter->num_rx_queues);
-
- for (i = 0; i < q_vector->rxr_count; i++) {
- j = adapter->rx_ring[r_idx].reg_idx;
- ixgbevf_set_ivar(adapter, 0, j, v_idx);
- r_idx = find_next_bit(q_vector->rxr_idx,
- adapter->num_rx_queues,
- r_idx + 1);
- }
- r_idx = find_first_bit(q_vector->txr_idx,
- adapter->num_tx_queues);
-
- for (i = 0; i < q_vector->txr_count; i++) {
- j = adapter->tx_ring[r_idx].reg_idx;
- ixgbevf_set_ivar(adapter, 1, j, v_idx);
- r_idx = find_next_bit(q_vector->txr_idx,
- adapter->num_tx_queues,
- r_idx + 1);
- }
-
- /* if this is a tx only vector halve the interrupt rate */
- if (q_vector->txr_count && !q_vector->rxr_count)
- q_vector->eitr = (adapter->eitr_param >> 1);
- else if (q_vector->rxr_count)
- /* rx only */
- q_vector->eitr = adapter->eitr_param;
-
- ixgbevf_write_eitr(adapter, v_idx, q_vector->eitr);
- }
-
- ixgbevf_set_ivar(adapter, -1, 1, v_idx);
-
- /* set up to autoclear timer, and the vectors */
- mask = IXGBE_EIMS_ENABLE_MASK;
- mask &= ~IXGBE_EIMS_OTHER;
- IXGBE_WRITE_REG(hw, IXGBE_VTEIAC, mask);
-}
-
-enum latency_range {
- lowest_latency = 0,
- low_latency = 1,
- bulk_latency = 2,
- latency_invalid = 255
-};
-
-/**
- * ixgbevf_update_itr - update the dynamic ITR value based on statistics
- * @adapter: pointer to adapter
- * @eitr: eitr setting (ints per sec) to give last timeslice
- * @itr_setting: current throttle rate in ints/second
- * @packets: the number of packets during this measurement interval
- * @bytes: the number of bytes during this measurement interval
- *
- * Stores a new ITR value based on packets and byte
- * counts during the last interrupt. The advantage of per interrupt
- * computation is faster updates and more accurate ITR for the current
- * traffic pattern. Constants in this function were computed
- * based on theoretical maximum wire speed and thresholds were set based
- * on testing data as well as attempting to minimize response time
- * while increasing bulk throughput.
- **/
-static u8 ixgbevf_update_itr(struct ixgbevf_adapter *adapter,
- u32 eitr, u8 itr_setting,
- int packets, int bytes)
-{
- unsigned int retval = itr_setting;
- u32 timepassed_us;
- u64 bytes_perint;
-
- if (packets == 0)
- goto update_itr_done;
-
-
- /* simple throttlerate management
- * 0-20MB/s lowest (100000 ints/s)
- * 20-100MB/s low (20000 ints/s)
- * 100-1249MB/s bulk (8000 ints/s)
- */
- /* what was last interrupt timeslice? */
- timepassed_us = 1000000/eitr;
- bytes_perint = bytes / timepassed_us; /* bytes/usec */
-
- switch (itr_setting) {
- case lowest_latency:
- if (bytes_perint > adapter->eitr_low)
- retval = low_latency;
- break;
- case low_latency:
- if (bytes_perint > adapter->eitr_high)
- retval = bulk_latency;
- else if (bytes_perint <= adapter->eitr_low)
- retval = lowest_latency;
- break;
- case bulk_latency:
- if (bytes_perint <= adapter->eitr_high)
- retval = low_latency;
- break;
- }
-
-update_itr_done:
- return retval;
-}
-
-/**
- * ixgbevf_write_eitr - write VTEITR register in hardware specific way
- * @adapter: pointer to adapter struct
- * @v_idx: vector index into q_vector array
- * @itr_reg: new value to be written in *register* format, not ints/s
- *
- * This function is made to be called by ethtool and by the driver
- * when it needs to update VTEITR registers at runtime. Hardware
- * specific quirks/differences are taken care of here.
- */
-static void ixgbevf_write_eitr(struct ixgbevf_adapter *adapter, int v_idx,
- u32 itr_reg)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- itr_reg = EITR_INTS_PER_SEC_TO_REG(itr_reg);
-
- /*
- * set the WDIS bit to not clear the timer bits and cause an
- * immediate assertion of the interrupt
- */
- itr_reg |= IXGBE_EITR_CNT_WDIS;
-
- IXGBE_WRITE_REG(hw, IXGBE_VTEITR(v_idx), itr_reg);
-}
-
-static void ixgbevf_set_itr_msix(struct ixgbevf_q_vector *q_vector)
-{
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- u32 new_itr;
- u8 current_itr, ret_itr;
- int i, r_idx, v_idx = q_vector->v_idx;
- struct ixgbevf_ring *rx_ring, *tx_ring;
-
- r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->txr_count; i++) {
- tx_ring = &(adapter->tx_ring[r_idx]);
- ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
- q_vector->tx_itr,
- tx_ring->total_packets,
- tx_ring->total_bytes);
- /* if the result for this queue would decrease interrupt
- * rate for this vector then use that result */
- q_vector->tx_itr = ((q_vector->tx_itr > ret_itr) ?
- q_vector->tx_itr - 1 : ret_itr);
- r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- ret_itr = ixgbevf_update_itr(adapter, q_vector->eitr,
- q_vector->rx_itr,
- rx_ring->total_packets,
- rx_ring->total_bytes);
- /* if the result for this queue would decrease interrupt
- * rate for this vector then use that result */
- q_vector->rx_itr = ((q_vector->rx_itr > ret_itr) ?
- q_vector->rx_itr - 1 : ret_itr);
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- current_itr = max(q_vector->rx_itr, q_vector->tx_itr);
-
- switch (current_itr) {
- /* counts and packets in update_itr are dependent on these numbers */
- case lowest_latency:
- new_itr = 100000;
- break;
- case low_latency:
- new_itr = 20000; /* aka hwitr = ~200 */
- break;
- case bulk_latency:
- default:
- new_itr = 8000;
- break;
- }
-
- if (new_itr != q_vector->eitr) {
- u32 itr_reg;
-
- /* save the algorithm value here, not the smoothed one */
- q_vector->eitr = new_itr;
- /* do an exponential smoothing */
- new_itr = ((q_vector->eitr * 90)/100) + ((new_itr * 10)/100);
- itr_reg = EITR_INTS_PER_SEC_TO_REG(new_itr);
- ixgbevf_write_eitr(adapter, v_idx, itr_reg);
- }
-}
-
-static irqreturn_t ixgbevf_msix_mbx(int irq, void *data)
-{
- struct net_device *netdev = data;
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- u32 eicr;
- u32 msg;
-
- eicr = IXGBE_READ_REG(hw, IXGBE_VTEICS);
- IXGBE_WRITE_REG(hw, IXGBE_VTEICR, eicr);
-
- if (!hw->mbx.ops.check_for_ack(hw)) {
- /*
- * checking for the ack clears the PFACK bit. Place
- * it back in the v2p_mailbox cache so that anyone
- * polling for an ack will not miss it. Also
- * avoid the read below because the code to read
- * the mailbox will also clear the ack bit. This was
- * causing lost acks. Just cache the bit and exit
- * the IRQ handler.
- */
- hw->mbx.v2p_mailbox |= IXGBE_VFMAILBOX_PFACK;
- goto out;
- }
-
- /* Not an ack interrupt, go ahead and read the message */
- hw->mbx.ops.read(hw, &msg, 1);
-
- if ((msg & IXGBE_MBVFICR_VFREQ_MASK) == IXGBE_PF_CONTROL_MSG)
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + 1));
-
-out:
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ixgbevf_msix_clean_tx(int irq, void *data)
-{
- struct ixgbevf_q_vector *q_vector = data;
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- struct ixgbevf_ring *tx_ring;
- int i, r_idx;
-
- if (!q_vector->txr_count)
- return IRQ_HANDLED;
-
- r_idx = find_first_bit(q_vector->txr_idx, adapter->num_tx_queues);
- for (i = 0; i < q_vector->txr_count; i++) {
- tx_ring = &(adapter->tx_ring[r_idx]);
- tx_ring->total_bytes = 0;
- tx_ring->total_packets = 0;
- ixgbevf_clean_tx_irq(adapter, tx_ring);
- r_idx = find_next_bit(q_vector->txr_idx, adapter->num_tx_queues,
- r_idx + 1);
- }
-
- if (adapter->itr_setting & 1)
- ixgbevf_set_itr_msix(q_vector);
-
- return IRQ_HANDLED;
-}
-
-/**
- * ixgbevf_msix_clean_rx - single unshared vector rx clean (all queues)
- * @irq: unused
- * @data: pointer to our q_vector struct for this interrupt vector
- **/
-static irqreturn_t ixgbevf_msix_clean_rx(int irq, void *data)
-{
- struct ixgbevf_q_vector *q_vector = data;
- struct ixgbevf_adapter *adapter = q_vector->adapter;
- struct ixgbe_hw *hw = &adapter->hw;
- struct ixgbevf_ring *rx_ring;
- int r_idx;
- int i;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- for (i = 0; i < q_vector->rxr_count; i++) {
- rx_ring = &(adapter->rx_ring[r_idx]);
- rx_ring->total_bytes = 0;
- rx_ring->total_packets = 0;
- r_idx = find_next_bit(q_vector->rxr_idx, adapter->num_rx_queues,
- r_idx + 1);
- }
-
- if (!q_vector->rxr_count)
- return IRQ_HANDLED;
-
- r_idx = find_first_bit(q_vector->rxr_idx, adapter->num_rx_queues);
- rx_ring = &(adapter->rx_ring[r_idx]);
- /* disable interrupts on this vector only */
- IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, rx_ring->v_idx);
- napi_schedule(&q_vector->napi);
-
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t ixgbevf_msix_clean_many(int irq, void *data)
-{
- ixgbevf_msix_clean_rx(irq, data);
- ixgbevf_msix_clean_tx(irq, data);
-
- return IRQ_HANDLED;
-}
-
-static inline void map_vector_to_rxq(struct ixgbevf_adapter *a, int v_idx,
- int r_idx)
-{
- struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
-
- set_bit(r_idx, q_vector->rxr_idx);
- q_vector->rxr_count++;
- a->rx_ring[r_idx].v_idx = 1 << v_idx;
-}
-
-static inline void map_vector_to_txq(struct ixgbevf_adapter *a, int v_idx,
- int t_idx)
-{
- struct ixgbevf_q_vector *q_vector = a->q_vector[v_idx];
-
- set_bit(t_idx, q_vector->txr_idx);
- q_vector->txr_count++;
- a->tx_ring[t_idx].v_idx = 1 << v_idx;
-}
-
-/**
- * ixgbevf_map_rings_to_vectors - Maps descriptor rings to vectors
- * @adapter: board private structure to initialize
- *
- * This function maps descriptor rings to the queue-specific vectors
- * we were allotted through the MSI-X enabling code. Ideally, we'd have
- * one vector per ring/queue, but on a constrained vector budget, we
- * group the rings as "efficiently" as possible. You would add new
- * mapping configurations in here.
- **/
-static int ixgbevf_map_rings_to_vectors(struct ixgbevf_adapter *adapter)
-{
- int q_vectors;
- int v_start = 0;
- int rxr_idx = 0, txr_idx = 0;
- int rxr_remaining = adapter->num_rx_queues;
- int txr_remaining = adapter->num_tx_queues;
- int i, j;
- int rqpv, tqpv;
- int err = 0;
-
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- /*
- * The ideal configuration...
- * We have enough vectors to map one per queue.
- */
- if (q_vectors == adapter->num_rx_queues + adapter->num_tx_queues) {
- for (; rxr_idx < rxr_remaining; v_start++, rxr_idx++)
- map_vector_to_rxq(adapter, v_start, rxr_idx);
-
- for (; txr_idx < txr_remaining; v_start++, txr_idx++)
- map_vector_to_txq(adapter, v_start, txr_idx);
- goto out;
- }
-
- /*
- * If we don't have enough vectors for a 1-to-1
- * mapping, we'll have to group them so there are
- * multiple queues per vector.
- */
- /* Re-adjusting *qpv takes care of the remainder. */
- for (i = v_start; i < q_vectors; i++) {
- rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - i);
- for (j = 0; j < rqpv; j++) {
- map_vector_to_rxq(adapter, i, rxr_idx);
- rxr_idx++;
- rxr_remaining--;
- }
- }
- for (i = v_start; i < q_vectors; i++) {
- tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - i);
- for (j = 0; j < tqpv; j++) {
- map_vector_to_txq(adapter, i, txr_idx);
- txr_idx++;
- txr_remaining--;
- }
- }
-
-out:
- return err;
-}
-
-/**
- * ixgbevf_request_msix_irqs - Initialize MSI-X interrupts
- * @adapter: board private structure
- *
- * ixgbevf_request_msix_irqs allocates MSI-X vectors and requests
- * interrupts from the kernel.
- **/
-static int ixgbevf_request_msix_irqs(struct ixgbevf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- irqreturn_t (*handler)(int, void *);
- int i, vector, q_vectors, err;
- int ri = 0, ti = 0;
-
- /* Decrement for Other and TCP Timer vectors */
- q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
-#define SET_HANDLER(_v) (((_v)->rxr_count && (_v)->txr_count) \
- ? &ixgbevf_msix_clean_many : \
- (_v)->rxr_count ? &ixgbevf_msix_clean_rx : \
- (_v)->txr_count ? &ixgbevf_msix_clean_tx : \
- NULL)
- for (vector = 0; vector < q_vectors; vector++) {
- handler = SET_HANDLER(adapter->q_vector[vector]);
-
- if (handler == &ixgbevf_msix_clean_rx) {
- sprintf(adapter->name[vector], "%s-%s-%d",
- netdev->name, "rx", ri++);
- } else if (handler == &ixgbevf_msix_clean_tx) {
- sprintf(adapter->name[vector], "%s-%s-%d",
- netdev->name, "tx", ti++);
- } else if (handler == &ixgbevf_msix_clean_many) {
- sprintf(adapter->name[vector], "%s-%s-%d",
- netdev->name, "TxRx", vector);
- } else {
- /* skip this unused q_vector */
- continue;
- }
- err = request_irq(adapter->msix_entries[vector].vector,
- handler, 0, adapter->name[vector],
- adapter->q_vector[vector]);
- if (err) {
- hw_dbg(&adapter->hw,
- "request_irq failed for MSIX interrupt "
- "Error: %d\n", err);
- goto free_queue_irqs;
- }
- }
-
- sprintf(adapter->name[vector], "%s:mbx", netdev->name);
- err = request_irq(adapter->msix_entries[vector].vector,
- &ixgbevf_msix_mbx, 0, adapter->name[vector], netdev);
- if (err) {
- hw_dbg(&adapter->hw,
- "request_irq for msix_mbx failed: %d\n", err);
- goto free_queue_irqs;
- }
-
- return 0;
-
-free_queue_irqs:
- for (i = vector - 1; i >= 0; i--)
- free_irq(adapter->msix_entries[--vector].vector,
- &(adapter->q_vector[i]));
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- return err;
-}
-
-static inline void ixgbevf_reset_q_vectors(struct ixgbevf_adapter *adapter)
-{
- int i, q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- for (i = 0; i < q_vectors; i++) {
- struct ixgbevf_q_vector *q_vector = adapter->q_vector[i];
- bitmap_zero(q_vector->rxr_idx, MAX_RX_QUEUES);
- bitmap_zero(q_vector->txr_idx, MAX_TX_QUEUES);
- q_vector->rxr_count = 0;
- q_vector->txr_count = 0;
- q_vector->eitr = adapter->eitr_param;
- }
-}
-
-/**
- * ixgbevf_request_irq - initialize interrupts
- * @adapter: board private structure
- *
- * Attempts to configure interrupts using the best available
- * capabilities of the hardware and kernel.
- **/
-static int ixgbevf_request_irq(struct ixgbevf_adapter *adapter)
-{
- int err = 0;
-
- err = ixgbevf_request_msix_irqs(adapter);
-
- if (err)
- hw_dbg(&adapter->hw,
- "request_irq failed, Error %d\n", err);
-
- return err;
-}
-
-static void ixgbevf_free_irq(struct ixgbevf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int i, q_vectors;
-
- q_vectors = adapter->num_msix_vectors;
-
- i = q_vectors - 1;
-
- free_irq(adapter->msix_entries[i].vector, netdev);
- i--;
-
- for (; i >= 0; i--) {
- free_irq(adapter->msix_entries[i].vector,
- adapter->q_vector[i]);
- }
-
- ixgbevf_reset_q_vectors(adapter);
-}
-
-/**
- * ixgbevf_irq_disable - Mask off interrupt generation on the NIC
- * @adapter: board private structure
- **/
-static inline void ixgbevf_irq_disable(struct ixgbevf_adapter *adapter)
-{
- int i;
- struct ixgbe_hw *hw = &adapter->hw;
-
- IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, ~0);
-
- IXGBE_WRITE_FLUSH(hw);
-
- for (i = 0; i < adapter->num_msix_vectors; i++)
- synchronize_irq(adapter->msix_entries[i].vector);
-}
-
-/**
- * ixgbevf_irq_enable - Enable default interrupt generation settings
- * @adapter: board private structure
- **/
-static inline void ixgbevf_irq_enable(struct ixgbevf_adapter *adapter,
- bool queues, bool flush)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- u32 mask;
- u64 qmask;
-
- mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
- qmask = ~0;
-
- IXGBE_WRITE_REG(hw, IXGBE_VTEIMS, mask);
-
- if (queues)
- ixgbevf_irq_enable_queues(adapter, qmask);
-
- if (flush)
- IXGBE_WRITE_FLUSH(hw);
-}
-
-/**
- * ixgbevf_configure_tx - Configure 82599 VF Transmit Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Tx unit of the MAC after a reset.
- **/
-static void ixgbevf_configure_tx(struct ixgbevf_adapter *adapter)
-{
- u64 tdba;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 i, j, tdlen, txctrl;
-
- /* Setup the HW Tx Head and Tail descriptor pointers */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- struct ixgbevf_ring *ring = &adapter->tx_ring[i];
- j = ring->reg_idx;
- tdba = ring->dma;
- tdlen = ring->count * sizeof(union ixgbe_adv_tx_desc);
- IXGBE_WRITE_REG(hw, IXGBE_VFTDBAL(j),
- (tdba & DMA_BIT_MASK(32)));
- IXGBE_WRITE_REG(hw, IXGBE_VFTDBAH(j), (tdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_VFTDLEN(j), tdlen);
- IXGBE_WRITE_REG(hw, IXGBE_VFTDH(j), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFTDT(j), 0);
- adapter->tx_ring[i].head = IXGBE_VFTDH(j);
- adapter->tx_ring[i].tail = IXGBE_VFTDT(j);
- /* Disable Tx Head Writeback RO bit, since this hoses
- * bookkeeping if things aren't delivered in order.
- */
- txctrl = IXGBE_READ_REG(hw, IXGBE_VFDCA_TXCTRL(j));
- txctrl &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN;
- IXGBE_WRITE_REG(hw, IXGBE_VFDCA_TXCTRL(j), txctrl);
- }
-}
-
-#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
-
-static void ixgbevf_configure_srrctl(struct ixgbevf_adapter *adapter, int index)
-{
- struct ixgbevf_ring *rx_ring;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 srrctl;
-
- rx_ring = &adapter->rx_ring[index];
-
- srrctl = IXGBE_SRRCTL_DROP_EN;
-
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- u16 bufsz = IXGBEVF_RXBUFFER_2048;
- /* grow the amount we can receive on large page machines */
- if (bufsz < (PAGE_SIZE / 2))
- bufsz = (PAGE_SIZE / 2);
- /* cap the bufsz at our largest descriptor size */
- bufsz = min((u16)IXGBEVF_MAX_RXBUFFER, bufsz);
-
- srrctl |= bufsz >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
- srrctl |= ((IXGBEVF_RX_HDR_SIZE <<
- IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) &
- IXGBE_SRRCTL_BSIZEHDR_MASK);
- } else {
- srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
-
- if (rx_ring->rx_buf_len == MAXIMUM_ETHERNET_VLAN_SIZE)
- srrctl |= IXGBEVF_RXBUFFER_2048 >>
- IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- else
- srrctl |= rx_ring->rx_buf_len >>
- IXGBE_SRRCTL_BSIZEPKT_SHIFT;
- }
- IXGBE_WRITE_REG(hw, IXGBE_VFSRRCTL(index), srrctl);
-}
-
-/**
- * ixgbevf_configure_rx - Configure 82599 VF Receive Unit after Reset
- * @adapter: board private structure
- *
- * Configure the Rx unit of the MAC after a reset.
- **/
-static void ixgbevf_configure_rx(struct ixgbevf_adapter *adapter)
-{
- u64 rdba;
- struct ixgbe_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
- int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
- int i, j;
- u32 rdlen;
- int rx_buf_len;
-
- /* Decide whether to use packet split mode or not */
- if (netdev->mtu > ETH_DATA_LEN) {
- if (adapter->flags & IXGBE_FLAG_RX_PS_CAPABLE)
- adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
- else
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
- } else {
- if (adapter->flags & IXGBE_FLAG_RX_1BUF_CAPABLE)
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
- else
- adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED;
- }
-
- /* Set the RX buffer length according to the mode */
- if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) {
- /* PSRTYPE must be initialized in 82599 */
- u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
- IXGBE_PSRTYPE_UDPHDR |
- IXGBE_PSRTYPE_IPV4HDR |
- IXGBE_PSRTYPE_IPV6HDR |
- IXGBE_PSRTYPE_L2HDR;
- IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, psrtype);
- rx_buf_len = IXGBEVF_RX_HDR_SIZE;
- } else {
- IXGBE_WRITE_REG(hw, IXGBE_VFPSRTYPE, 0);
- if (netdev->mtu <= ETH_DATA_LEN)
- rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE;
- else
- rx_buf_len = ALIGN(max_frame, 1024);
- }
-
- rdlen = adapter->rx_ring[0].count * sizeof(union ixgbe_adv_rx_desc);
- /* Setup the HW Rx Head and Tail Descriptor Pointers and
- * the Base and Length of the Rx Descriptor Ring */
- for (i = 0; i < adapter->num_rx_queues; i++) {
- rdba = adapter->rx_ring[i].dma;
- j = adapter->rx_ring[i].reg_idx;
- IXGBE_WRITE_REG(hw, IXGBE_VFRDBAL(j),
- (rdba & DMA_BIT_MASK(32)));
- IXGBE_WRITE_REG(hw, IXGBE_VFRDBAH(j), (rdba >> 32));
- IXGBE_WRITE_REG(hw, IXGBE_VFRDLEN(j), rdlen);
- IXGBE_WRITE_REG(hw, IXGBE_VFRDH(j), 0);
- IXGBE_WRITE_REG(hw, IXGBE_VFRDT(j), 0);
- adapter->rx_ring[i].head = IXGBE_VFRDH(j);
- adapter->rx_ring[i].tail = IXGBE_VFRDT(j);
- adapter->rx_ring[i].rx_buf_len = rx_buf_len;
-
- ixgbevf_configure_srrctl(adapter, j);
- }
-}
-
-static void ixgbevf_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* add VID to filter table */
- if (hw->mac.ops.set_vfta)
- hw->mac.ops.set_vfta(hw, vid, 0, true);
- set_bit(vid, adapter->active_vlans);
-}
-
-static void ixgbevf_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* remove VID from filter table */
- if (hw->mac.ops.set_vfta)
- hw->mac.ops.set_vfta(hw, vid, 0, false);
- clear_bit(vid, adapter->active_vlans);
-}
-
-static void ixgbevf_restore_vlan(struct ixgbevf_adapter *adapter)
-{
- u16 vid;
-
- for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID)
- ixgbevf_vlan_rx_add_vid(adapter->netdev, vid);
-}
-
-static int ixgbevf_write_uc_addr_list(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int count = 0;
-
- if ((netdev_uc_count(netdev)) > 10) {
- printk(KERN_ERR "Too many unicast filters - No Space\n");
- return -ENOSPC;
- }
-
- if (!netdev_uc_empty(netdev)) {
- struct netdev_hw_addr *ha;
- netdev_for_each_uc_addr(ha, netdev) {
- hw->mac.ops.set_uc_addr(hw, ++count, ha->addr);
- udelay(200);
- }
- } else {
- /*
- * If the list is empty then send message to PF driver to
- * clear all macvlans on this VF.
- */
- hw->mac.ops.set_uc_addr(hw, 0, NULL);
- }
-
- return count;
-}
-
-/**
- * ixgbevf_set_rx_mode - Multicast set
- * @netdev: network interface device structure
- *
- * The set_rx_method entry point is called whenever the multicast address
- * list or the network interface flags are updated. This routine is
- * responsible for configuring the hardware for proper multicast mode.
- **/
-static void ixgbevf_set_rx_mode(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
-
- /* reprogram multicast list */
- if (hw->mac.ops.update_mc_addr_list)
- hw->mac.ops.update_mc_addr_list(hw, netdev);
-
- ixgbevf_write_uc_addr_list(netdev);
-}
-
-static void ixgbevf_napi_enable_all(struct ixgbevf_adapter *adapter)
-{
- int q_idx;
- struct ixgbevf_q_vector *q_vector;
- int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- for (q_idx = 0; q_idx < q_vectors; q_idx++) {
- struct napi_struct *napi;
- q_vector = adapter->q_vector[q_idx];
- if (!q_vector->rxr_count)
- continue;
- napi = &q_vector->napi;
- if (q_vector->rxr_count > 1)
- napi->poll = &ixgbevf_clean_rxonly_many;
-
- napi_enable(napi);
- }
-}
-
-static void ixgbevf_napi_disable_all(struct ixgbevf_adapter *adapter)
-{
- int q_idx;
- struct ixgbevf_q_vector *q_vector;
- int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
-
- for (q_idx = 0; q_idx < q_vectors; q_idx++) {
- q_vector = adapter->q_vector[q_idx];
- if (!q_vector->rxr_count)
- continue;
- napi_disable(&q_vector->napi);
- }
-}
-
-static void ixgbevf_configure(struct ixgbevf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- int i;
-
- ixgbevf_set_rx_mode(netdev);
-
- ixgbevf_restore_vlan(adapter);
-
- ixgbevf_configure_tx(adapter);
- ixgbevf_configure_rx(adapter);
- for (i = 0; i < adapter->num_rx_queues; i++) {
- struct ixgbevf_ring *ring = &adapter->rx_ring[i];
- ixgbevf_alloc_rx_buffers(adapter, ring, ring->count);
- ring->next_to_use = ring->count - 1;
- writel(ring->next_to_use, adapter->hw.hw_addr + ring->tail);
- }
-}
-
-#define IXGBE_MAX_RX_DESC_POLL 10
-static inline void ixgbevf_rx_desc_queue_enable(struct ixgbevf_adapter *adapter,
- int rxr)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- int j = adapter->rx_ring[rxr].reg_idx;
- int k;
-
- for (k = 0; k < IXGBE_MAX_RX_DESC_POLL; k++) {
- if (IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j)) & IXGBE_RXDCTL_ENABLE)
- break;
- else
- msleep(1);
- }
- if (k >= IXGBE_MAX_RX_DESC_POLL) {
- hw_dbg(hw, "RXDCTL.ENABLE on Rx queue %d "
- "not set within the polling period\n", rxr);
- }
-
- ixgbevf_release_rx_desc(&adapter->hw, &adapter->rx_ring[rxr],
- (adapter->rx_ring[rxr].count - 1));
-}
-
-static void ixgbevf_save_reset_stats(struct ixgbevf_adapter *adapter)
-{
- /* Only save pre-reset stats if there are some */
- if (adapter->stats.vfgprc || adapter->stats.vfgptc) {
- adapter->stats.saved_reset_vfgprc += adapter->stats.vfgprc -
- adapter->stats.base_vfgprc;
- adapter->stats.saved_reset_vfgptc += adapter->stats.vfgptc -
- adapter->stats.base_vfgptc;
- adapter->stats.saved_reset_vfgorc += adapter->stats.vfgorc -
- adapter->stats.base_vfgorc;
- adapter->stats.saved_reset_vfgotc += adapter->stats.vfgotc -
- adapter->stats.base_vfgotc;
- adapter->stats.saved_reset_vfmprc += adapter->stats.vfmprc -
- adapter->stats.base_vfmprc;
- }
-}
-
-static void ixgbevf_init_last_counter_stats(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- adapter->stats.last_vfgprc = IXGBE_READ_REG(hw, IXGBE_VFGPRC);
- adapter->stats.last_vfgorc = IXGBE_READ_REG(hw, IXGBE_VFGORC_LSB);
- adapter->stats.last_vfgorc |=
- (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGORC_MSB))) << 32);
- adapter->stats.last_vfgptc = IXGBE_READ_REG(hw, IXGBE_VFGPTC);
- adapter->stats.last_vfgotc = IXGBE_READ_REG(hw, IXGBE_VFGOTC_LSB);
- adapter->stats.last_vfgotc |=
- (((u64)(IXGBE_READ_REG(hw, IXGBE_VFGOTC_MSB))) << 32);
- adapter->stats.last_vfmprc = IXGBE_READ_REG(hw, IXGBE_VFMPRC);
-
- adapter->stats.base_vfgprc = adapter->stats.last_vfgprc;
- adapter->stats.base_vfgorc = adapter->stats.last_vfgorc;
- adapter->stats.base_vfgptc = adapter->stats.last_vfgptc;
- adapter->stats.base_vfgotc = adapter->stats.last_vfgotc;
- adapter->stats.base_vfmprc = adapter->stats.last_vfmprc;
-}
-
-static int ixgbevf_up_complete(struct ixgbevf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- int i, j = 0;
- int num_rx_rings = adapter->num_rx_queues;
- u32 txdctl, rxdctl;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- j = adapter->tx_ring[i].reg_idx;
- txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
- /* enable WTHRESH=8 descriptors, to encourage burst writeback */
- txdctl |= (8 << 16);
- IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
- }
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- j = adapter->tx_ring[i].reg_idx;
- txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
- txdctl |= IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j), txdctl);
- }
-
- for (i = 0; i < num_rx_rings; i++) {
- j = adapter->rx_ring[i].reg_idx;
- rxdctl = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(j));
- rxdctl |= IXGBE_RXDCTL_ENABLE | IXGBE_RXDCTL_VME;
- if (hw->mac.type == ixgbe_mac_X540_vf) {
- rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK;
- rxdctl |= ((netdev->mtu + ETH_HLEN + ETH_FCS_LEN) |
- IXGBE_RXDCTL_RLPML_EN);
- }
- IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(j), rxdctl);
- ixgbevf_rx_desc_queue_enable(adapter, i);
- }
-
- ixgbevf_configure_msix(adapter);
-
- if (hw->mac.ops.set_rar) {
- if (is_valid_ether_addr(hw->mac.addr))
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
- else
- hw->mac.ops.set_rar(hw, 0, hw->mac.perm_addr, 0);
- }
-
- clear_bit(__IXGBEVF_DOWN, &adapter->state);
- ixgbevf_napi_enable_all(adapter);
-
- /* enable transmits */
- netif_tx_start_all_queues(netdev);
-
- ixgbevf_save_reset_stats(adapter);
- ixgbevf_init_last_counter_stats(adapter);
-
- /* bring the link up in the watchdog, this could race with our first
- * link up interrupt but shouldn't be a problem */
- adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE;
- adapter->link_check_timeout = jiffies;
- mod_timer(&adapter->watchdog_timer, jiffies);
- return 0;
-}
-
-int ixgbevf_up(struct ixgbevf_adapter *adapter)
-{
- int err;
- struct ixgbe_hw *hw = &adapter->hw;
-
- ixgbevf_configure(adapter);
-
- err = ixgbevf_up_complete(adapter);
-
- /* clear any pending interrupts, may auto mask */
- IXGBE_READ_REG(hw, IXGBE_VTEICR);
-
- ixgbevf_irq_enable(adapter, true, true);
-
- return err;
-}
-
-/**
- * ixgbevf_clean_rx_ring - Free Rx Buffers per Queue
- * @adapter: board private structure
- * @rx_ring: ring to free buffers from
- **/
-static void ixgbevf_clean_rx_ring(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *rx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
- unsigned long size;
- unsigned int i;
-
- if (!rx_ring->rx_buffer_info)
- return;
-
- /* Free all the Rx ring sk_buffs */
- for (i = 0; i < rx_ring->count; i++) {
- struct ixgbevf_rx_buffer *rx_buffer_info;
-
- rx_buffer_info = &rx_ring->rx_buffer_info[i];
- if (rx_buffer_info->dma) {
- dma_unmap_single(&pdev->dev, rx_buffer_info->dma,
- rx_ring->rx_buf_len,
- DMA_FROM_DEVICE);
- rx_buffer_info->dma = 0;
- }
- if (rx_buffer_info->skb) {
- struct sk_buff *skb = rx_buffer_info->skb;
- rx_buffer_info->skb = NULL;
- do {
- struct sk_buff *this = skb;
- skb = skb->prev;
- dev_kfree_skb(this);
- } while (skb);
- }
- if (!rx_buffer_info->page)
- continue;
- dma_unmap_page(&pdev->dev, rx_buffer_info->page_dma,
- PAGE_SIZE / 2, DMA_FROM_DEVICE);
- rx_buffer_info->page_dma = 0;
- put_page(rx_buffer_info->page);
- rx_buffer_info->page = NULL;
- rx_buffer_info->page_offset = 0;
- }
-
- size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
- memset(rx_ring->rx_buffer_info, 0, size);
-
- /* Zero out the descriptor ring */
- memset(rx_ring->desc, 0, rx_ring->size);
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- if (rx_ring->head)
- writel(0, adapter->hw.hw_addr + rx_ring->head);
- if (rx_ring->tail)
- writel(0, adapter->hw.hw_addr + rx_ring->tail);
-}
-
-/**
- * ixgbevf_clean_tx_ring - Free Tx Buffers
- * @adapter: board private structure
- * @tx_ring: ring to be cleaned
- **/
-static void ixgbevf_clean_tx_ring(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring)
-{
- struct ixgbevf_tx_buffer *tx_buffer_info;
- unsigned long size;
- unsigned int i;
-
- if (!tx_ring->tx_buffer_info)
- return;
-
- /* Free all the Tx ring sk_buffs */
-
- for (i = 0; i < tx_ring->count; i++) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
- }
-
- size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
- memset(tx_ring->tx_buffer_info, 0, size);
-
- memset(tx_ring->desc, 0, tx_ring->size);
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
-
- if (tx_ring->head)
- writel(0, adapter->hw.hw_addr + tx_ring->head);
- if (tx_ring->tail)
- writel(0, adapter->hw.hw_addr + tx_ring->tail);
-}
-
-/**
- * ixgbevf_clean_all_rx_rings - Free Rx Buffers for all queues
- * @adapter: board private structure
- **/
-static void ixgbevf_clean_all_rx_rings(struct ixgbevf_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- ixgbevf_clean_rx_ring(adapter, &adapter->rx_ring[i]);
-}
-
-/**
- * ixgbevf_clean_all_tx_rings - Free Tx Buffers for all queues
- * @adapter: board private structure
- **/
-static void ixgbevf_clean_all_tx_rings(struct ixgbevf_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- ixgbevf_clean_tx_ring(adapter, &adapter->tx_ring[i]);
-}
-
-void ixgbevf_down(struct ixgbevf_adapter *adapter)
-{
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 txdctl;
- int i, j;
-
- /* signal that we are down to the interrupt handler */
- set_bit(__IXGBEVF_DOWN, &adapter->state);
- /* disable receives */
-
- netif_tx_disable(netdev);
-
- msleep(10);
-
- netif_tx_stop_all_queues(netdev);
-
- ixgbevf_irq_disable(adapter);
-
- ixgbevf_napi_disable_all(adapter);
-
- del_timer_sync(&adapter->watchdog_timer);
- /* can't call flush scheduled work here because it can deadlock
- * if linkwatch_event tries to acquire the rtnl_lock which we are
- * holding */
- while (adapter->flags & IXGBE_FLAG_IN_WATCHDOG_TASK)
- msleep(1);
-
- /* disable transmits in the hardware now that interrupts are off */
- for (i = 0; i < adapter->num_tx_queues; i++) {
- j = adapter->tx_ring[i].reg_idx;
- txdctl = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(j));
- IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(j),
- (txdctl & ~IXGBE_TXDCTL_ENABLE));
- }
-
- netif_carrier_off(netdev);
-
- if (!pci_channel_offline(adapter->pdev))
- ixgbevf_reset(adapter);
-
- ixgbevf_clean_all_tx_rings(adapter);
- ixgbevf_clean_all_rx_rings(adapter);
-}
-
-void ixgbevf_reinit_locked(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- WARN_ON(in_interrupt());
-
- while (test_and_set_bit(__IXGBEVF_RESETTING, &adapter->state))
- msleep(1);
-
- /*
- * Check if PF is up before re-init. If not then skip until
- * later when the PF is up and ready to service requests from
- * the VF via mailbox. If the VF is up and running then the
- * watchdog task will continue to schedule reset tasks until
- * the PF is up and running.
- */
- if (!hw->mac.ops.reset_hw(hw)) {
- ixgbevf_down(adapter);
- ixgbevf_up(adapter);
- }
-
- clear_bit(__IXGBEVF_RESETTING, &adapter->state);
-}
-
-void ixgbevf_reset(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct net_device *netdev = adapter->netdev;
-
- if (hw->mac.ops.reset_hw(hw))
- hw_dbg(hw, "PF still resetting\n");
- else
- hw->mac.ops.init_hw(hw);
-
- if (is_valid_ether_addr(adapter->hw.mac.addr)) {
- memcpy(netdev->dev_addr, adapter->hw.mac.addr,
- netdev->addr_len);
- memcpy(netdev->perm_addr, adapter->hw.mac.addr,
- netdev->addr_len);
- }
-}
-
-static void ixgbevf_acquire_msix_vectors(struct ixgbevf_adapter *adapter,
- int vectors)
-{
- int err, vector_threshold;
-
- /* We'll want at least 3 (vector_threshold):
- * 1) TxQ[0] Cleanup
- * 2) RxQ[0] Cleanup
- * 3) Other (Link Status Change, etc.)
- */
- vector_threshold = MIN_MSIX_COUNT;
-
- /* The more we get, the more we will assign to Tx/Rx Cleanup
- * for the separate queues...where Rx Cleanup >= Tx Cleanup.
- * Right now, we simply care about how many we'll get; we'll
- * set them up later while requesting irq's.
- */
- while (vectors >= vector_threshold) {
- err = pci_enable_msix(adapter->pdev, adapter->msix_entries,
- vectors);
- if (!err) /* Success in acquiring all requested vectors. */
- break;
- else if (err < 0)
- vectors = 0; /* Nasty failure, quit now */
- else /* err == number of vectors we should try again with */
- vectors = err;
- }
-
- if (vectors < vector_threshold) {
- /* Can't allocate enough MSI-X interrupts? Oh well.
- * This just means we'll go with either a single MSI
- * vector or fall back to legacy interrupts.
- */
- hw_dbg(&adapter->hw,
- "Unable to allocate MSI-X interrupts\n");
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
- } else {
- /*
- * Adjust for only the vectors we'll use, which is minimum
- * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
- * vectors we were allocated.
- */
- adapter->num_msix_vectors = vectors;
- }
-}
-
-/*
- * ixgbevf_set_num_queues: Allocate queues for device, feature dependent
- * @adapter: board private structure to initialize
- *
- * This is the top level queue allocation routine. The order here is very
- * important, starting with the "most" number of features turned on at once,
- * and ending with the smallest set of features. This way large combinations
- * can be allocated if they're turned on, and smaller combinations are the
- * fallthrough conditions.
- *
- **/
-static void ixgbevf_set_num_queues(struct ixgbevf_adapter *adapter)
-{
- /* Start with base case */
- adapter->num_rx_queues = 1;
- adapter->num_tx_queues = 1;
- adapter->num_rx_pools = adapter->num_rx_queues;
- adapter->num_rx_queues_per_pool = 1;
-}
-
-/**
- * ixgbevf_alloc_queues - Allocate memory for all rings
- * @adapter: board private structure to initialize
- *
- * We allocate one ring per queue at run-time since we don't know the
- * number of queues at compile-time. The polling_netdev array is
- * intended for Multiqueue, but should work fine with a single queue.
- **/
-static int ixgbevf_alloc_queues(struct ixgbevf_adapter *adapter)
-{
- int i;
-
- adapter->tx_ring = kcalloc(adapter->num_tx_queues,
- sizeof(struct ixgbevf_ring), GFP_KERNEL);
- if (!adapter->tx_ring)
- goto err_tx_ring_allocation;
-
- adapter->rx_ring = kcalloc(adapter->num_rx_queues,
- sizeof(struct ixgbevf_ring), GFP_KERNEL);
- if (!adapter->rx_ring)
- goto err_rx_ring_allocation;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- adapter->tx_ring[i].count = adapter->tx_ring_count;
- adapter->tx_ring[i].queue_index = i;
- adapter->tx_ring[i].reg_idx = i;
- }
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- adapter->rx_ring[i].count = adapter->rx_ring_count;
- adapter->rx_ring[i].queue_index = i;
- adapter->rx_ring[i].reg_idx = i;
- }
-
- return 0;
-
-err_rx_ring_allocation:
- kfree(adapter->tx_ring);
-err_tx_ring_allocation:
- return -ENOMEM;
-}
-
-/**
- * ixgbevf_set_interrupt_capability - set MSI-X or FAIL if not supported
- * @adapter: board private structure to initialize
- *
- * Attempt to configure the interrupts using the best available
- * capabilities of the hardware and the kernel.
- **/
-static int ixgbevf_set_interrupt_capability(struct ixgbevf_adapter *adapter)
-{
- int err = 0;
- int vector, v_budget;
-
- /*
- * It's easy to be greedy for MSI-X vectors, but it really
- * doesn't do us much good if we have a lot more vectors
- * than CPU's. So let's be conservative and only ask for
- * (roughly) twice the number of vectors as there are CPU's.
- */
- v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues,
- (int)(num_online_cpus() * 2)) + NON_Q_VECTORS;
-
- /* A failure in MSI-X entry allocation isn't fatal, but it does
- * mean we disable MSI-X capabilities of the adapter. */
- adapter->msix_entries = kcalloc(v_budget,
- sizeof(struct msix_entry), GFP_KERNEL);
- if (!adapter->msix_entries) {
- err = -ENOMEM;
- goto out;
- }
-
- for (vector = 0; vector < v_budget; vector++)
- adapter->msix_entries[vector].entry = vector;
-
- ixgbevf_acquire_msix_vectors(adapter, v_budget);
-
-out:
- return err;
-}
-
-/**
- * ixgbevf_alloc_q_vectors - Allocate memory for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * We allocate one q_vector per queue interrupt. If allocation fails we
- * return -ENOMEM.
- **/
-static int ixgbevf_alloc_q_vectors(struct ixgbevf_adapter *adapter)
-{
- int q_idx, num_q_vectors;
- struct ixgbevf_q_vector *q_vector;
- int napi_vectors;
- int (*poll)(struct napi_struct *, int);
-
- num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- napi_vectors = adapter->num_rx_queues;
- poll = &ixgbevf_clean_rxonly;
-
- for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
- q_vector = kzalloc(sizeof(struct ixgbevf_q_vector), GFP_KERNEL);
- if (!q_vector)
- goto err_out;
- q_vector->adapter = adapter;
- q_vector->v_idx = q_idx;
- q_vector->eitr = adapter->eitr_param;
- if (q_idx < napi_vectors)
- netif_napi_add(adapter->netdev, &q_vector->napi,
- (*poll), 64);
- adapter->q_vector[q_idx] = q_vector;
- }
-
- return 0;
-
-err_out:
- while (q_idx) {
- q_idx--;
- q_vector = adapter->q_vector[q_idx];
- netif_napi_del(&q_vector->napi);
- kfree(q_vector);
- adapter->q_vector[q_idx] = NULL;
- }
- return -ENOMEM;
-}
-
-/**
- * ixgbevf_free_q_vectors - Free memory allocated for interrupt vectors
- * @adapter: board private structure to initialize
- *
- * This function frees the memory allocated to the q_vectors. In addition if
- * NAPI is enabled it will delete any references to the NAPI struct prior
- * to freeing the q_vector.
- **/
-static void ixgbevf_free_q_vectors(struct ixgbevf_adapter *adapter)
-{
- int q_idx, num_q_vectors;
- int napi_vectors;
-
- num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS;
- napi_vectors = adapter->num_rx_queues;
-
- for (q_idx = 0; q_idx < num_q_vectors; q_idx++) {
- struct ixgbevf_q_vector *q_vector = adapter->q_vector[q_idx];
-
- adapter->q_vector[q_idx] = NULL;
- if (q_idx < napi_vectors)
- netif_napi_del(&q_vector->napi);
- kfree(q_vector);
- }
-}
-
-/**
- * ixgbevf_reset_interrupt_capability - Reset MSIX setup
- * @adapter: board private structure
- *
- **/
-static void ixgbevf_reset_interrupt_capability(struct ixgbevf_adapter *adapter)
-{
- pci_disable_msix(adapter->pdev);
- kfree(adapter->msix_entries);
- adapter->msix_entries = NULL;
-}
-
-/**
- * ixgbevf_init_interrupt_scheme - Determine if MSIX is supported and init
- * @adapter: board private structure to initialize
- *
- **/
-static int ixgbevf_init_interrupt_scheme(struct ixgbevf_adapter *adapter)
-{
- int err;
-
- /* Number of supported queues */
- ixgbevf_set_num_queues(adapter);
-
- err = ixgbevf_set_interrupt_capability(adapter);
- if (err) {
- hw_dbg(&adapter->hw,
- "Unable to setup interrupt capabilities\n");
- goto err_set_interrupt;
- }
-
- err = ixgbevf_alloc_q_vectors(adapter);
- if (err) {
- hw_dbg(&adapter->hw, "Unable to allocate memory for queue "
- "vectors\n");
- goto err_alloc_q_vectors;
- }
-
- err = ixgbevf_alloc_queues(adapter);
- if (err) {
- printk(KERN_ERR "Unable to allocate memory for queues\n");
- goto err_alloc_queues;
- }
-
- hw_dbg(&adapter->hw, "Multiqueue %s: Rx Queue count = %u, "
- "Tx Queue count = %u\n",
- (adapter->num_rx_queues > 1) ? "Enabled" :
- "Disabled", adapter->num_rx_queues, adapter->num_tx_queues);
-
- set_bit(__IXGBEVF_DOWN, &adapter->state);
-
- return 0;
-err_alloc_queues:
- ixgbevf_free_q_vectors(adapter);
-err_alloc_q_vectors:
- ixgbevf_reset_interrupt_capability(adapter);
-err_set_interrupt:
- return err;
-}
-
-/**
- * ixgbevf_sw_init - Initialize general software structures
- * (struct ixgbevf_adapter)
- * @adapter: board private structure to initialize
- *
- * ixgbevf_sw_init initializes the Adapter private data structure.
- * Fields are initialized based on PCI device information and
- * OS network device settings (MTU size).
- **/
-static int __devinit ixgbevf_sw_init(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
- struct pci_dev *pdev = adapter->pdev;
- int err;
-
- /* PCI config space info */
-
- hw->vendor_id = pdev->vendor;
- hw->device_id = pdev->device;
- hw->revision_id = pdev->revision;
- hw->subsystem_vendor_id = pdev->subsystem_vendor;
- hw->subsystem_device_id = pdev->subsystem_device;
-
- hw->mbx.ops.init_params(hw);
- hw->mac.max_tx_queues = MAX_TX_QUEUES;
- hw->mac.max_rx_queues = MAX_RX_QUEUES;
- err = hw->mac.ops.reset_hw(hw);
- if (err) {
- dev_info(&pdev->dev,
- "PF still in reset state, assigning new address\n");
- dev_hw_addr_random(adapter->netdev, hw->mac.addr);
- } else {
- err = hw->mac.ops.init_hw(hw);
- if (err) {
- printk(KERN_ERR "init_shared_code failed: %d\n", err);
- goto out;
- }
- }
-
- /* Enable dynamic interrupt throttling rates */
- adapter->eitr_param = 20000;
- adapter->itr_setting = 1;
-
- /* set defaults for eitr in MegaBytes */
- adapter->eitr_low = 10;
- adapter->eitr_high = 20;
-
- /* set default ring sizes */
- adapter->tx_ring_count = IXGBEVF_DEFAULT_TXD;
- adapter->rx_ring_count = IXGBEVF_DEFAULT_RXD;
-
- /* enable rx csum by default */
- adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED;
-
- set_bit(__IXGBEVF_DOWN, &adapter->state);
-
-out:
- return err;
-}
-
-#define UPDATE_VF_COUNTER_32bit(reg, last_counter, counter) \
- { \
- u32 current_counter = IXGBE_READ_REG(hw, reg); \
- if (current_counter < last_counter) \
- counter += 0x100000000LL; \
- last_counter = current_counter; \
- counter &= 0xFFFFFFFF00000000LL; \
- counter |= current_counter; \
- }
-
-#define UPDATE_VF_COUNTER_36bit(reg_lsb, reg_msb, last_counter, counter) \
- { \
- u64 current_counter_lsb = IXGBE_READ_REG(hw, reg_lsb); \
- u64 current_counter_msb = IXGBE_READ_REG(hw, reg_msb); \
- u64 current_counter = (current_counter_msb << 32) | \
- current_counter_lsb; \
- if (current_counter < last_counter) \
- counter += 0x1000000000LL; \
- last_counter = current_counter; \
- counter &= 0xFFFFFFF000000000LL; \
- counter |= current_counter; \
- }
-/**
- * ixgbevf_update_stats - Update the board statistics counters.
- * @adapter: board private structure
- **/
-void ixgbevf_update_stats(struct ixgbevf_adapter *adapter)
-{
- struct ixgbe_hw *hw = &adapter->hw;
-
- UPDATE_VF_COUNTER_32bit(IXGBE_VFGPRC, adapter->stats.last_vfgprc,
- adapter->stats.vfgprc);
- UPDATE_VF_COUNTER_32bit(IXGBE_VFGPTC, adapter->stats.last_vfgptc,
- adapter->stats.vfgptc);
- UPDATE_VF_COUNTER_36bit(IXGBE_VFGORC_LSB, IXGBE_VFGORC_MSB,
- adapter->stats.last_vfgorc,
- adapter->stats.vfgorc);
- UPDATE_VF_COUNTER_36bit(IXGBE_VFGOTC_LSB, IXGBE_VFGOTC_MSB,
- adapter->stats.last_vfgotc,
- adapter->stats.vfgotc);
- UPDATE_VF_COUNTER_32bit(IXGBE_VFMPRC, adapter->stats.last_vfmprc,
- adapter->stats.vfmprc);
-
- /* Fill out the OS statistics structure */
- adapter->netdev->stats.multicast = adapter->stats.vfmprc -
- adapter->stats.base_vfmprc;
-}
-
-/**
- * ixgbevf_watchdog - Timer Call-back
- * @data: pointer to adapter cast into an unsigned long
- **/
-static void ixgbevf_watchdog(unsigned long data)
-{
- struct ixgbevf_adapter *adapter = (struct ixgbevf_adapter *)data;
- struct ixgbe_hw *hw = &adapter->hw;
- u64 eics = 0;
- int i;
-
- /*
- * Do the watchdog outside of interrupt context due to the lovely
- * delays that some of the newer hardware requires
- */
-
- if (test_bit(__IXGBEVF_DOWN, &adapter->state))
- goto watchdog_short_circuit;
-
- /* get one bit for every active tx/rx interrupt vector */
- for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) {
- struct ixgbevf_q_vector *qv = adapter->q_vector[i];
- if (qv->rxr_count || qv->txr_count)
- eics |= (1 << i);
- }
-
- IXGBE_WRITE_REG(hw, IXGBE_VTEICS, (u32)eics);
-
-watchdog_short_circuit:
- schedule_work(&adapter->watchdog_task);
-}
-
-/**
- * ixgbevf_tx_timeout - Respond to a Tx Hang
- * @netdev: network interface device structure
- **/
-static void ixgbevf_tx_timeout(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- /* Do the reset outside of interrupt context */
- schedule_work(&adapter->reset_task);
-}
-
-static void ixgbevf_reset_task(struct work_struct *work)
-{
- struct ixgbevf_adapter *adapter;
- adapter = container_of(work, struct ixgbevf_adapter, reset_task);
-
- /* If we're already down or resetting, just bail */
- if (test_bit(__IXGBEVF_DOWN, &adapter->state) ||
- test_bit(__IXGBEVF_RESETTING, &adapter->state))
- return;
-
- adapter->tx_timeout_count++;
-
- ixgbevf_reinit_locked(adapter);
-}
-
-/**
- * ixgbevf_watchdog_task - worker thread to bring link up
- * @work: pointer to work_struct containing our data
- **/
-static void ixgbevf_watchdog_task(struct work_struct *work)
-{
- struct ixgbevf_adapter *adapter = container_of(work,
- struct ixgbevf_adapter,
- watchdog_task);
- struct net_device *netdev = adapter->netdev;
- struct ixgbe_hw *hw = &adapter->hw;
- u32 link_speed = adapter->link_speed;
- bool link_up = adapter->link_up;
-
- adapter->flags |= IXGBE_FLAG_IN_WATCHDOG_TASK;
-
- /*
- * Always check the link on the watchdog because we have
- * no LSC interrupt
- */
- if (hw->mac.ops.check_link) {
- if ((hw->mac.ops.check_link(hw, &link_speed,
- &link_up, false)) != 0) {
- adapter->link_up = link_up;
- adapter->link_speed = link_speed;
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
- schedule_work(&adapter->reset_task);
- goto pf_has_reset;
- }
- } else {
- /* always assume link is up, if no check link
- * function */
- link_speed = IXGBE_LINK_SPEED_10GB_FULL;
- link_up = true;
- }
- adapter->link_up = link_up;
- adapter->link_speed = link_speed;
-
- if (link_up) {
- if (!netif_carrier_ok(netdev)) {
- hw_dbg(&adapter->hw, "NIC Link is Up, %u Gbps\n",
- (link_speed == IXGBE_LINK_SPEED_10GB_FULL) ?
- 10 : 1);
- netif_carrier_on(netdev);
- netif_tx_wake_all_queues(netdev);
- }
- } else {
- adapter->link_up = false;
- adapter->link_speed = 0;
- if (netif_carrier_ok(netdev)) {
- hw_dbg(&adapter->hw, "NIC Link is Down\n");
- netif_carrier_off(netdev);
- netif_tx_stop_all_queues(netdev);
- }
- }
-
- ixgbevf_update_stats(adapter);
-
-pf_has_reset:
- /* Reset the timer */
- if (!test_bit(__IXGBEVF_DOWN, &adapter->state))
- mod_timer(&adapter->watchdog_timer,
- round_jiffies(jiffies + (2 * HZ)));
-
- adapter->flags &= ~IXGBE_FLAG_IN_WATCHDOG_TASK;
-}
-
-/**
- * ixgbevf_free_tx_resources - Free Tx Resources per Queue
- * @adapter: board private structure
- * @tx_ring: Tx descriptor ring for a specific queue
- *
- * Free all transmit software resources
- **/
-void ixgbevf_free_tx_resources(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- ixgbevf_clean_tx_ring(adapter, tx_ring);
-
- vfree(tx_ring->tx_buffer_info);
- tx_ring->tx_buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, tx_ring->size, tx_ring->desc,
- tx_ring->dma);
-
- tx_ring->desc = NULL;
-}
-
-/**
- * ixgbevf_free_all_tx_resources - Free Tx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all transmit software resources
- **/
-static void ixgbevf_free_all_tx_resources(struct ixgbevf_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_tx_queues; i++)
- if (adapter->tx_ring[i].desc)
- ixgbevf_free_tx_resources(adapter,
- &adapter->tx_ring[i]);
-
-}
-
-/**
- * ixgbevf_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
- * @tx_ring: tx descriptor ring (for a specific queue) to setup
- *
- * Return 0 on success, negative on failure
- **/
-int ixgbevf_setup_tx_resources(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgbevf_tx_buffer) * tx_ring->count;
- tx_ring->tx_buffer_info = vzalloc(size);
- if (!tx_ring->tx_buffer_info)
- goto err;
-
- /* round up to nearest 4K */
- tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc);
- tx_ring->size = ALIGN(tx_ring->size, 4096);
-
- tx_ring->desc = dma_alloc_coherent(&pdev->dev, tx_ring->size,
- &tx_ring->dma, GFP_KERNEL);
- if (!tx_ring->desc)
- goto err;
-
- tx_ring->next_to_use = 0;
- tx_ring->next_to_clean = 0;
- tx_ring->work_limit = tx_ring->count;
- return 0;
-
-err:
- vfree(tx_ring->tx_buffer_info);
- tx_ring->tx_buffer_info = NULL;
- hw_dbg(&adapter->hw, "Unable to allocate memory for the transmit "
- "descriptor ring\n");
- return -ENOMEM;
-}
-
-/**
- * ixgbevf_setup_all_tx_resources - allocate all queues Tx resources
- * @adapter: board private structure
- *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not). It is the
- * callers duty to clean those orphaned rings.
- *
- * Return 0 on success, negative on failure
- **/
-static int ixgbevf_setup_all_tx_resources(struct ixgbevf_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_tx_queues; i++) {
- err = ixgbevf_setup_tx_resources(adapter, &adapter->tx_ring[i]);
- if (!err)
- continue;
- hw_dbg(&adapter->hw,
- "Allocation for Tx Queue %u failed\n", i);
- break;
- }
-
- return err;
-}
-
-/**
- * ixgbevf_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
- * @rx_ring: rx descriptor ring (for a specific queue) to setup
- *
- * Returns 0 on success, negative on failure
- **/
-int ixgbevf_setup_rx_resources(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *rx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
- int size;
-
- size = sizeof(struct ixgbevf_rx_buffer) * rx_ring->count;
- rx_ring->rx_buffer_info = vzalloc(size);
- if (!rx_ring->rx_buffer_info) {
- hw_dbg(&adapter->hw,
- "Unable to vmalloc buffer memory for "
- "the receive descriptor ring\n");
- goto alloc_failed;
- }
-
- /* Round up to nearest 4K */
- rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc);
- rx_ring->size = ALIGN(rx_ring->size, 4096);
-
- rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
- &rx_ring->dma, GFP_KERNEL);
-
- if (!rx_ring->desc) {
- hw_dbg(&adapter->hw,
- "Unable to allocate memory for "
- "the receive descriptor ring\n");
- vfree(rx_ring->rx_buffer_info);
- rx_ring->rx_buffer_info = NULL;
- goto alloc_failed;
- }
-
- rx_ring->next_to_clean = 0;
- rx_ring->next_to_use = 0;
-
- return 0;
-alloc_failed:
- return -ENOMEM;
-}
-
-/**
- * ixgbevf_setup_all_rx_resources - allocate all queues Rx resources
- * @adapter: board private structure
- *
- * If this function returns with an error, then it's possible one or
- * more of the rings is populated (while the rest are not). It is the
- * callers duty to clean those orphaned rings.
- *
- * Return 0 on success, negative on failure
- **/
-static int ixgbevf_setup_all_rx_resources(struct ixgbevf_adapter *adapter)
-{
- int i, err = 0;
-
- for (i = 0; i < adapter->num_rx_queues; i++) {
- err = ixgbevf_setup_rx_resources(adapter, &adapter->rx_ring[i]);
- if (!err)
- continue;
- hw_dbg(&adapter->hw,
- "Allocation for Rx Queue %u failed\n", i);
- break;
- }
- return err;
-}
-
-/**
- * ixgbevf_free_rx_resources - Free Rx Resources
- * @adapter: board private structure
- * @rx_ring: ring to clean the resources from
- *
- * Free all receive software resources
- **/
-void ixgbevf_free_rx_resources(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *rx_ring)
-{
- struct pci_dev *pdev = adapter->pdev;
-
- ixgbevf_clean_rx_ring(adapter, rx_ring);
-
- vfree(rx_ring->rx_buffer_info);
- rx_ring->rx_buffer_info = NULL;
-
- dma_free_coherent(&pdev->dev, rx_ring->size, rx_ring->desc,
- rx_ring->dma);
-
- rx_ring->desc = NULL;
-}
-
-/**
- * ixgbevf_free_all_rx_resources - Free Rx Resources for All Queues
- * @adapter: board private structure
- *
- * Free all receive software resources
- **/
-static void ixgbevf_free_all_rx_resources(struct ixgbevf_adapter *adapter)
-{
- int i;
-
- for (i = 0; i < adapter->num_rx_queues; i++)
- if (adapter->rx_ring[i].desc)
- ixgbevf_free_rx_resources(adapter,
- &adapter->rx_ring[i]);
-}
-
-/**
- * ixgbevf_open - Called when a network interface is made active
- * @netdev: network interface device structure
- *
- * Returns 0 on success, negative value on failure
- *
- * The open entry point is called when a network interface is made
- * active by the system (IFF_UP). At this point all resources needed
- * for transmit and receive operations are allocated, the interrupt
- * handler is registered with the OS, the watchdog timer is started,
- * and the stack is notified that the interface is ready.
- **/
-static int ixgbevf_open(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int err;
-
- /* disallow open during test */
- if (test_bit(__IXGBEVF_TESTING, &adapter->state))
- return -EBUSY;
-
- if (hw->adapter_stopped) {
- ixgbevf_reset(adapter);
- /* if adapter is still stopped then PF isn't up and
- * the vf can't start. */
- if (hw->adapter_stopped) {
- err = IXGBE_ERR_MBX;
- printk(KERN_ERR "Unable to start - perhaps the PF"
- " Driver isn't up yet\n");
- goto err_setup_reset;
- }
- }
-
- /* allocate transmit descriptors */
- err = ixgbevf_setup_all_tx_resources(adapter);
- if (err)
- goto err_setup_tx;
-
- /* allocate receive descriptors */
- err = ixgbevf_setup_all_rx_resources(adapter);
- if (err)
- goto err_setup_rx;
-
- ixgbevf_configure(adapter);
-
- /*
- * Map the Tx/Rx rings to the vectors we were allotted.
- * if request_irq will be called in this function map_rings
- * must be called *before* up_complete
- */
- ixgbevf_map_rings_to_vectors(adapter);
-
- err = ixgbevf_up_complete(adapter);
- if (err)
- goto err_up;
-
- /* clear any pending interrupts, may auto mask */
- IXGBE_READ_REG(hw, IXGBE_VTEICR);
- err = ixgbevf_request_irq(adapter);
- if (err)
- goto err_req_irq;
-
- ixgbevf_irq_enable(adapter, true, true);
-
- return 0;
-
-err_req_irq:
- ixgbevf_down(adapter);
-err_up:
- ixgbevf_free_irq(adapter);
-err_setup_rx:
- ixgbevf_free_all_rx_resources(adapter);
-err_setup_tx:
- ixgbevf_free_all_tx_resources(adapter);
- ixgbevf_reset(adapter);
-
-err_setup_reset:
-
- return err;
-}
-
-/**
- * ixgbevf_close - Disables a network interface
- * @netdev: network interface device structure
- *
- * Returns 0, this is not allowed to fail
- *
- * The close entry point is called when an interface is de-activated
- * by the OS. The hardware is still under the drivers control, but
- * needs to be disabled. A global MAC reset is issued to stop the
- * hardware, and all transmit and receive resources are freed.
- **/
-static int ixgbevf_close(struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- ixgbevf_down(adapter);
- ixgbevf_free_irq(adapter);
-
- ixgbevf_free_all_tx_resources(adapter);
- ixgbevf_free_all_rx_resources(adapter);
-
- return 0;
-}
-
-static int ixgbevf_tso(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
-{
- struct ixgbe_adv_tx_context_desc *context_desc;
- unsigned int i;
- int err;
- struct ixgbevf_tx_buffer *tx_buffer_info;
- u32 vlan_macip_lens = 0, type_tucmd_mlhl;
- u32 mss_l4len_idx, l4len;
-
- if (skb_is_gso(skb)) {
- if (skb_header_cloned(skb)) {
- err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC);
- if (err)
- return err;
- }
- l4len = tcp_hdrlen(skb);
- *hdr_len += l4len;
-
- if (skb->protocol == htons(ETH_P_IP)) {
- struct iphdr *iph = ip_hdr(skb);
- iph->tot_len = 0;
- iph->check = 0;
- tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
- iph->daddr, 0,
- IPPROTO_TCP,
- 0);
- adapter->hw_tso_ctxt++;
- } else if (skb_is_gso_v6(skb)) {
- ipv6_hdr(skb)->payload_len = 0;
- tcp_hdr(skb)->check =
- ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
- &ipv6_hdr(skb)->daddr,
- 0, IPPROTO_TCP, 0);
- adapter->hw_tso6_ctxt++;
- }
-
- i = tx_ring->next_to_use;
-
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
-
- /* VLAN MACLEN IPLEN */
- if (tx_flags & IXGBE_TX_FLAGS_VLAN)
- vlan_macip_lens |=
- (tx_flags & IXGBE_TX_FLAGS_VLAN_MASK);
- vlan_macip_lens |= ((skb_network_offset(skb)) <<
- IXGBE_ADVTXD_MACLEN_SHIFT);
- *hdr_len += skb_network_offset(skb);
- vlan_macip_lens |=
- (skb_transport_header(skb) - skb_network_header(skb));
- *hdr_len +=
- (skb_transport_header(skb) - skb_network_header(skb));
- context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
- context_desc->seqnum_seed = 0;
-
- /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
- type_tucmd_mlhl = (IXGBE_TXD_CMD_DEXT |
- IXGBE_ADVTXD_DTYP_CTXT);
-
- if (skb->protocol == htons(ETH_P_IP))
- type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
- type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
- context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
-
- /* MSS L4LEN IDX */
- mss_l4len_idx =
- (skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT);
- mss_l4len_idx |= (l4len << IXGBE_ADVTXD_L4LEN_SHIFT);
- /* use index 1 for TSO */
- mss_l4len_idx |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
- context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
-
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return true;
- }
-
- return false;
-}
-
-static bool ixgbevf_tx_csum(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags)
-{
- struct ixgbe_adv_tx_context_desc *context_desc;
- unsigned int i;
- struct ixgbevf_tx_buffer *tx_buffer_info;
- u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
-
- if (skb->ip_summed == CHECKSUM_PARTIAL ||
- (tx_flags & IXGBE_TX_FLAGS_VLAN)) {
- i = tx_ring->next_to_use;
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- context_desc = IXGBE_TX_CTXTDESC_ADV(*tx_ring, i);
-
- if (tx_flags & IXGBE_TX_FLAGS_VLAN)
- vlan_macip_lens |= (tx_flags &
- IXGBE_TX_FLAGS_VLAN_MASK);
- vlan_macip_lens |= (skb_network_offset(skb) <<
- IXGBE_ADVTXD_MACLEN_SHIFT);
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- vlan_macip_lens |= (skb_transport_header(skb) -
- skb_network_header(skb));
-
- context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens);
- context_desc->seqnum_seed = 0;
-
- type_tucmd_mlhl |= (IXGBE_TXD_CMD_DEXT |
- IXGBE_ADVTXD_DTYP_CTXT);
-
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- switch (skb->protocol) {
- case __constant_htons(ETH_P_IP):
- type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
- if (ip_hdr(skb)->protocol == IPPROTO_TCP)
- type_tucmd_mlhl |=
- IXGBE_ADVTXD_TUCMD_L4T_TCP;
- break;
- case __constant_htons(ETH_P_IPV6):
- /* XXX what about other V6 headers?? */
- if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
- type_tucmd_mlhl |=
- IXGBE_ADVTXD_TUCMD_L4T_TCP;
- break;
- default:
- if (unlikely(net_ratelimit())) {
- printk(KERN_WARNING
- "partial checksum but "
- "proto=%x!\n",
- skb->protocol);
- }
- break;
- }
- }
-
- context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd_mlhl);
- /* use index zero for tx checksum offload */
- context_desc->mss_l4len_idx = 0;
-
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- adapter->hw_csum_tx_good++;
- i++;
- if (i == tx_ring->count)
- i = 0;
- tx_ring->next_to_use = i;
-
- return true;
- }
-
- return false;
-}
-
-static int ixgbevf_tx_map(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring,
- struct sk_buff *skb, u32 tx_flags,
- unsigned int first)
-{
- struct pci_dev *pdev = adapter->pdev;
- struct ixgbevf_tx_buffer *tx_buffer_info;
- unsigned int len;
- unsigned int total = skb->len;
- unsigned int offset = 0, size;
- int count = 0;
- unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
- unsigned int f;
- int i;
-
- i = tx_ring->next_to_use;
-
- len = min(skb_headlen(skb), total);
- while (len) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
-
- tx_buffer_info->length = size;
- tx_buffer_info->mapped_as_page = false;
- tx_buffer_info->dma = dma_map_single(&adapter->pdev->dev,
- skb->data + offset,
- size, DMA_TO_DEVICE);
- if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
- goto dma_error;
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- len -= size;
- total -= size;
- offset += size;
- count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- for (f = 0; f < nr_frags; f++) {
- struct skb_frag_struct *frag;
-
- frag = &skb_shinfo(skb)->frags[f];
- len = min((unsigned int)frag->size, total);
- offset = frag->page_offset;
-
- while (len) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- size = min(len, (unsigned int)IXGBE_MAX_DATA_PER_TXD);
-
- tx_buffer_info->length = size;
- tx_buffer_info->dma = dma_map_page(&adapter->pdev->dev,
- frag->page,
- offset,
- size,
- DMA_TO_DEVICE);
- tx_buffer_info->mapped_as_page = true;
- if (dma_mapping_error(&pdev->dev, tx_buffer_info->dma))
- goto dma_error;
- tx_buffer_info->time_stamp = jiffies;
- tx_buffer_info->next_to_watch = i;
-
- len -= size;
- total -= size;
- offset += size;
- count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
- if (total == 0)
- break;
- }
-
- if (i == 0)
- i = tx_ring->count - 1;
- else
- i = i - 1;
- tx_ring->tx_buffer_info[i].skb = skb;
- tx_ring->tx_buffer_info[first].next_to_watch = i;
-
- return count;
-
-dma_error:
- dev_err(&pdev->dev, "TX DMA map failed\n");
-
- /* clear timestamp and dma mappings for failed tx_buffer_info map */
- tx_buffer_info->dma = 0;
- tx_buffer_info->time_stamp = 0;
- tx_buffer_info->next_to_watch = 0;
- count--;
-
- /* clear timestamp and dma mappings for remaining portion of packet */
- while (count >= 0) {
- count--;
- i--;
- if (i < 0)
- i += tx_ring->count;
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- ixgbevf_unmap_and_free_tx_resource(adapter, tx_buffer_info);
- }
-
- return count;
-}
-
-static void ixgbevf_tx_queue(struct ixgbevf_adapter *adapter,
- struct ixgbevf_ring *tx_ring, int tx_flags,
- int count, u32 paylen, u8 hdr_len)
-{
- union ixgbe_adv_tx_desc *tx_desc = NULL;
- struct ixgbevf_tx_buffer *tx_buffer_info;
- u32 olinfo_status = 0, cmd_type_len = 0;
- unsigned int i;
-
- u32 txd_cmd = IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS | IXGBE_TXD_CMD_IFCS;
-
- cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
-
- cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
-
- if (tx_flags & IXGBE_TX_FLAGS_VLAN)
- cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
-
- if (tx_flags & IXGBE_TX_FLAGS_TSO) {
- cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
-
- olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- /* use index 1 context for tso */
- olinfo_status |= (1 << IXGBE_ADVTXD_IDX_SHIFT);
- if (tx_flags & IXGBE_TX_FLAGS_IPV4)
- olinfo_status |= IXGBE_TXD_POPTS_IXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- } else if (tx_flags & IXGBE_TX_FLAGS_CSUM)
- olinfo_status |= IXGBE_TXD_POPTS_TXSM <<
- IXGBE_ADVTXD_POPTS_SHIFT;
-
- olinfo_status |= ((paylen - hdr_len) << IXGBE_ADVTXD_PAYLEN_SHIFT);
-
- i = tx_ring->next_to_use;
- while (count--) {
- tx_buffer_info = &tx_ring->tx_buffer_info[i];
- tx_desc = IXGBE_TX_DESC_ADV(*tx_ring, i);
- tx_desc->read.buffer_addr = cpu_to_le64(tx_buffer_info->dma);
- tx_desc->read.cmd_type_len =
- cpu_to_le32(cmd_type_len | tx_buffer_info->length);
- tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
- i++;
- if (i == tx_ring->count)
- i = 0;
- }
-
- tx_desc->read.cmd_type_len |= cpu_to_le32(txd_cmd);
-
- /*
- * Force memory writes to complete before letting h/w
- * know there are new descriptors to fetch. (Only
- * applicable for weak-ordered memory model archs,
- * such as IA-64).
- */
- wmb();
-
- tx_ring->next_to_use = i;
- writel(i, adapter->hw.hw_addr + tx_ring->tail);
-}
-
-static int __ixgbevf_maybe_stop_tx(struct net_device *netdev,
- struct ixgbevf_ring *tx_ring, int size)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- netif_stop_subqueue(netdev, tx_ring->queue_index);
- /* Herbert's original patch had:
- * smp_mb__after_netif_stop_queue();
- * but since that doesn't exist yet, just open code it. */
- smp_mb();
-
- /* We need to check again in a case another CPU has just
- * made room available. */
- if (likely(IXGBE_DESC_UNUSED(tx_ring) < size))
- return -EBUSY;
-
- /* A reprieve! - use start_queue because it doesn't call schedule */
- netif_start_subqueue(netdev, tx_ring->queue_index);
- ++adapter->restart_queue;
- return 0;
-}
-
-static int ixgbevf_maybe_stop_tx(struct net_device *netdev,
- struct ixgbevf_ring *tx_ring, int size)
-{
- if (likely(IXGBE_DESC_UNUSED(tx_ring) >= size))
- return 0;
- return __ixgbevf_maybe_stop_tx(netdev, tx_ring, size);
-}
-
-static int ixgbevf_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbevf_ring *tx_ring;
- unsigned int first;
- unsigned int tx_flags = 0;
- u8 hdr_len = 0;
- int r_idx = 0, tso;
- int count = 0;
-
- unsigned int f;
-
- tx_ring = &adapter->tx_ring[r_idx];
-
- if (vlan_tx_tag_present(skb)) {
- tx_flags |= vlan_tx_tag_get(skb);
- tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
- tx_flags |= IXGBE_TX_FLAGS_VLAN;
- }
-
- /* four things can cause us to need a context descriptor */
- if (skb_is_gso(skb) ||
- (skb->ip_summed == CHECKSUM_PARTIAL) ||
- (tx_flags & IXGBE_TX_FLAGS_VLAN))
- count++;
-
- count += TXD_USE_COUNT(skb_headlen(skb));
- for (f = 0; f < skb_shinfo(skb)->nr_frags; f++)
- count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size);
-
- if (ixgbevf_maybe_stop_tx(netdev, tx_ring, count)) {
- adapter->tx_busy++;
- return NETDEV_TX_BUSY;
- }
-
- first = tx_ring->next_to_use;
-
- if (skb->protocol == htons(ETH_P_IP))
- tx_flags |= IXGBE_TX_FLAGS_IPV4;
- tso = ixgbevf_tso(adapter, tx_ring, skb, tx_flags, &hdr_len);
- if (tso < 0) {
- dev_kfree_skb_any(skb);
- return NETDEV_TX_OK;
- }
-
- if (tso)
- tx_flags |= IXGBE_TX_FLAGS_TSO;
- else if (ixgbevf_tx_csum(adapter, tx_ring, skb, tx_flags) &&
- (skb->ip_summed == CHECKSUM_PARTIAL))
- tx_flags |= IXGBE_TX_FLAGS_CSUM;
-
- ixgbevf_tx_queue(adapter, tx_ring, tx_flags,
- ixgbevf_tx_map(adapter, tx_ring, skb, tx_flags, first),
- skb->len, hdr_len);
-
- ixgbevf_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
-
- return NETDEV_TX_OK;
-}
-
-/**
- * ixgbevf_set_mac - Change the Ethernet Address of the NIC
- * @netdev: network interface device structure
- * @p: pointer to an address structure
- *
- * Returns 0 on success, negative on failure
- **/
-static int ixgbevf_set_mac(struct net_device *netdev, void *p)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- struct sockaddr *addr = p;
-
- if (!is_valid_ether_addr(addr->sa_data))
- return -EADDRNOTAVAIL;
-
- memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
- memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
-
- if (hw->mac.ops.set_rar)
- hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0);
-
- return 0;
-}
-
-/**
- * ixgbevf_change_mtu - Change the Maximum Transfer Unit
- * @netdev: network interface device structure
- * @new_mtu: new value for maximum frame size
- *
- * Returns 0 on success, negative on failure
- **/
-static int ixgbevf_change_mtu(struct net_device *netdev, int new_mtu)
-{
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
- struct ixgbe_hw *hw = &adapter->hw;
- int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
- int max_possible_frame = MAXIMUM_ETHERNET_VLAN_SIZE;
- u32 msg[2];
-
- if (adapter->hw.mac.type == ixgbe_mac_X540_vf)
- max_possible_frame = IXGBE_MAX_JUMBO_FRAME_SIZE;
-
- /* MTU < 68 is an error and causes problems on some kernels */
- if ((new_mtu < 68) || (max_frame > max_possible_frame))
- return -EINVAL;
-
- hw_dbg(&adapter->hw, "changing MTU from %d to %d\n",
- netdev->mtu, new_mtu);
- /* must set new MTU before calling down or up */
- netdev->mtu = new_mtu;
-
- msg[0] = IXGBE_VF_SET_LPE;
- msg[1] = max_frame;
- hw->mbx.ops.write_posted(hw, msg, 2);
-
- if (netif_running(netdev))
- ixgbevf_reinit_locked(adapter);
-
- return 0;
-}
-
-static void ixgbevf_shutdown(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- netif_device_detach(netdev);
-
- if (netif_running(netdev)) {
- ixgbevf_down(adapter);
- ixgbevf_free_irq(adapter);
- ixgbevf_free_all_tx_resources(adapter);
- ixgbevf_free_all_rx_resources(adapter);
- }
-
-#ifdef CONFIG_PM
- pci_save_state(pdev);
-#endif
-
- pci_disable_device(pdev);
-}
-
-static const struct net_device_ops ixgbe_netdev_ops = {
- .ndo_open = ixgbevf_open,
- .ndo_stop = ixgbevf_close,
- .ndo_start_xmit = ixgbevf_xmit_frame,
- .ndo_set_rx_mode = ixgbevf_set_rx_mode,
- .ndo_set_multicast_list = ixgbevf_set_rx_mode,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_set_mac_address = ixgbevf_set_mac,
- .ndo_change_mtu = ixgbevf_change_mtu,
- .ndo_tx_timeout = ixgbevf_tx_timeout,
- .ndo_vlan_rx_add_vid = ixgbevf_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = ixgbevf_vlan_rx_kill_vid,
-};
-
-static void ixgbevf_assign_netdev_ops(struct net_device *dev)
-{
- dev->netdev_ops = &ixgbe_netdev_ops;
- ixgbevf_set_ethtool_ops(dev);
- dev->watchdog_timeo = 5 * HZ;
-}
-
-/**
- * ixgbevf_probe - Device Initialization Routine
- * @pdev: PCI device information struct
- * @ent: entry in ixgbevf_pci_tbl
- *
- * Returns 0 on success, negative on failure
- *
- * ixgbevf_probe initializes an adapter identified by a pci_dev structure.
- * The OS initialization, configuring of the adapter private structure,
- * and a hardware reset occur.
- **/
-static int __devinit ixgbevf_probe(struct pci_dev *pdev,
- const struct pci_device_id *ent)
-{
- struct net_device *netdev;
- struct ixgbevf_adapter *adapter = NULL;
- struct ixgbe_hw *hw = NULL;
- const struct ixgbevf_info *ii = ixgbevf_info_tbl[ent->driver_data];
- static int cards_found;
- int err, pci_using_dac;
-
- err = pci_enable_device(pdev);
- if (err)
- return err;
-
- if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) &&
- !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) {
- pci_using_dac = 1;
- } else {
- err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
- if (err) {
- err = dma_set_coherent_mask(&pdev->dev,
- DMA_BIT_MASK(32));
- if (err) {
- dev_err(&pdev->dev, "No usable DMA "
- "configuration, aborting\n");
- goto err_dma;
- }
- }
- pci_using_dac = 0;
- }
-
- err = pci_request_regions(pdev, ixgbevf_driver_name);
- if (err) {
- dev_err(&pdev->dev, "pci_request_regions failed 0x%x\n", err);
- goto err_pci_reg;
- }
-
- pci_set_master(pdev);
-
-#ifdef HAVE_TX_MQ
- netdev = alloc_etherdev_mq(sizeof(struct ixgbevf_adapter),
- MAX_TX_QUEUES);
-#else
- netdev = alloc_etherdev(sizeof(struct ixgbevf_adapter));
-#endif
- if (!netdev) {
- err = -ENOMEM;
- goto err_alloc_etherdev;
- }
-
- SET_NETDEV_DEV(netdev, &pdev->dev);
-
- pci_set_drvdata(pdev, netdev);
- adapter = netdev_priv(netdev);
-
- adapter->netdev = netdev;
- adapter->pdev = pdev;
- hw = &adapter->hw;
- hw->back = adapter;
- adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1;
-
- /*
- * call save state here in standalone driver because it relies on
- * adapter struct to exist, and needs to call netdev_priv
- */
- pci_save_state(pdev);
-
- hw->hw_addr = ioremap(pci_resource_start(pdev, 0),
- pci_resource_len(pdev, 0));
- if (!hw->hw_addr) {
- err = -EIO;
- goto err_ioremap;
- }
-
- ixgbevf_assign_netdev_ops(netdev);
-
- adapter->bd_number = cards_found;
-
- /* Setup hw api */
- memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops));
- hw->mac.type = ii->mac;
-
- memcpy(&hw->mbx.ops, &ixgbevf_mbx_ops,
- sizeof(struct ixgbe_mbx_operations));
-
- adapter->flags &= ~IXGBE_FLAG_RX_PS_CAPABLE;
- adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED;
- adapter->flags |= IXGBE_FLAG_RX_1BUF_CAPABLE;
-
- /* setup the private structure */
- err = ixgbevf_sw_init(adapter);
-
- netdev->features = NETIF_F_SG |
- NETIF_F_IP_CSUM |
- NETIF_F_HW_VLAN_TX |
- NETIF_F_HW_VLAN_RX |
- NETIF_F_HW_VLAN_FILTER;
-
- netdev->features |= NETIF_F_IPV6_CSUM;
- netdev->features |= NETIF_F_TSO;
- netdev->features |= NETIF_F_TSO6;
- netdev->features |= NETIF_F_GRO;
- netdev->vlan_features |= NETIF_F_TSO;
- netdev->vlan_features |= NETIF_F_TSO6;
- netdev->vlan_features |= NETIF_F_IP_CSUM;
- netdev->vlan_features |= NETIF_F_IPV6_CSUM;
- netdev->vlan_features |= NETIF_F_SG;
-
- if (pci_using_dac)
- netdev->features |= NETIF_F_HIGHDMA;
-
- /* The HW MAC address was set and/or determined in sw_init */
- memcpy(netdev->dev_addr, adapter->hw.mac.addr, netdev->addr_len);
- memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len);
-
- if (!is_valid_ether_addr(netdev->dev_addr)) {
- printk(KERN_ERR "invalid MAC address\n");
- err = -EIO;
- goto err_sw_init;
- }
-
- init_timer(&adapter->watchdog_timer);
- adapter->watchdog_timer.function = ixgbevf_watchdog;
- adapter->watchdog_timer.data = (unsigned long)adapter;
-
- INIT_WORK(&adapter->reset_task, ixgbevf_reset_task);
- INIT_WORK(&adapter->watchdog_task, ixgbevf_watchdog_task);
-
- err = ixgbevf_init_interrupt_scheme(adapter);
- if (err)
- goto err_sw_init;
-
- /* pick up the PCI bus settings for reporting later */
- if (hw->mac.ops.get_bus_info)
- hw->mac.ops.get_bus_info(hw);
-
- strcpy(netdev->name, "eth%d");
-
- err = register_netdev(netdev);
- if (err)
- goto err_register;
-
- adapter->netdev_registered = true;
-
- netif_carrier_off(netdev);
-
- ixgbevf_init_last_counter_stats(adapter);
-
- /* print the MAC address */
- hw_dbg(hw, "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
- netdev->dev_addr[0],
- netdev->dev_addr[1],
- netdev->dev_addr[2],
- netdev->dev_addr[3],
- netdev->dev_addr[4],
- netdev->dev_addr[5]);
-
- hw_dbg(hw, "MAC: %d\n", hw->mac.type);
-
- hw_dbg(hw, "LRO is disabled\n");
-
- hw_dbg(hw, "Intel(R) 82599 Virtual Function\n");
- cards_found++;
- return 0;
-
-err_register:
-err_sw_init:
- ixgbevf_reset_interrupt_capability(adapter);
- iounmap(hw->hw_addr);
-err_ioremap:
- free_netdev(netdev);
-err_alloc_etherdev:
- pci_release_regions(pdev);
-err_pci_reg:
-err_dma:
- pci_disable_device(pdev);
- return err;
-}
-
-/**
- * ixgbevf_remove - Device Removal Routine
- * @pdev: PCI device information struct
- *
- * ixgbevf_remove is called by the PCI subsystem to alert the driver
- * that it should release a PCI device. The could be caused by a
- * Hot-Plug event, or because the driver is going to be removed from
- * memory.
- **/
-static void __devexit ixgbevf_remove(struct pci_dev *pdev)
-{
- struct net_device *netdev = pci_get_drvdata(pdev);
- struct ixgbevf_adapter *adapter = netdev_priv(netdev);
-
- set_bit(__IXGBEVF_DOWN, &adapter->state);
-
- del_timer_sync(&adapter->watchdog_timer);
-
- cancel_work_sync(&adapter->reset_task);
- cancel_work_sync(&adapter->watchdog_task);
-
- if (adapter->netdev_registered) {
- unregister_netdev(netdev);
- adapter->netdev_registered = false;
- }
-
- ixgbevf_reset_interrupt_capability(adapter);
-
- iounmap(adapter->hw.hw_addr);
- pci_release_regions(pdev);
-
- hw_dbg(&adapter->hw, "Remove complete\n");
-
- kfree(adapter->tx_ring);
- kfree(adapter->rx_ring);
-
- free_netdev(netdev);
-
- pci_disable_device(pdev);
-}
-
-static struct pci_driver ixgbevf_driver = {
- .name = ixgbevf_driver_name,
- .id_table = ixgbevf_pci_tbl,
- .probe = ixgbevf_probe,
- .remove = __devexit_p(ixgbevf_remove),
- .shutdown = ixgbevf_shutdown,
-};
-
-/**
- * ixgbevf_init_module - Driver Registration Routine
- *
- * ixgbevf_init_module is the first routine called when the driver is
- * loaded. All it does is register with the PCI subsystem.
- **/
-static int __init ixgbevf_init_module(void)
-{
- int ret;
- printk(KERN_INFO "ixgbevf: %s - version %s\n", ixgbevf_driver_string,
- ixgbevf_driver_version);
-
- printk(KERN_INFO "%s\n", ixgbevf_copyright);
-
- ret = pci_register_driver(&ixgbevf_driver);
- return ret;
-}
-
-module_init(ixgbevf_init_module);
-
-/**
- * ixgbevf_exit_module - Driver Exit Cleanup Routine
- *
- * ixgbevf_exit_module is called just before the driver is removed
- * from memory.
- **/
-static void __exit ixgbevf_exit_module(void)
-{
- pci_unregister_driver(&ixgbevf_driver);
-}
-
-#ifdef DEBUG
-/**
- * ixgbevf_get_hw_dev_name - return device name string
- * used by hardware layer to print debugging information
- **/
-char *ixgbevf_get_hw_dev_name(struct ixgbe_hw *hw)
-{
- struct ixgbevf_adapter *adapter = hw->back;
- return adapter->netdev->name;
-}
-
-#endif
-module_exit(ixgbevf_exit_module);
-
-/* ixgbevf_main.c */
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "mbx.h"
-
-/**
- * ixgbevf_poll_for_msg - Wait for message notification
- * @hw: pointer to the HW structure
- *
- * returns 0 if it successfully received a message notification
- **/
-static s32 ixgbevf_poll_for_msg(struct ixgbe_hw *hw)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- while (countdown && mbx->ops.check_for_msg(hw)) {
- countdown--;
- udelay(mbx->udelay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-
- return countdown ? 0 : IXGBE_ERR_MBX;
-}
-
-/**
- * ixgbevf_poll_for_ack - Wait for message acknowledgement
- * @hw: pointer to the HW structure
- *
- * returns 0 if it successfully received a message acknowledgement
- **/
-static s32 ixgbevf_poll_for_ack(struct ixgbe_hw *hw)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- int countdown = mbx->timeout;
-
- while (countdown && mbx->ops.check_for_ack(hw)) {
- countdown--;
- udelay(mbx->udelay);
- }
-
- /* if we failed, all future posted messages fail until reset */
- if (!countdown)
- mbx->timeout = 0;
-
- return countdown ? 0 : IXGBE_ERR_MBX;
-}
-
-/**
- * ixgbevf_read_posted_mbx - Wait for message notification and receive message
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns 0 if it successfully received a message notification and
- * copied it into the receive buffer.
- **/
-static s32 ixgbevf_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val = IXGBE_ERR_MBX;
-
- ret_val = ixgbevf_poll_for_msg(hw);
-
- /* if ack received read message, otherwise we timed out */
- if (!ret_val)
- ret_val = mbx->ops.read(hw, msg, size);
-
- return ret_val;
-}
-
-/**
- * ixgbevf_write_posted_mbx - Write a message to the mailbox, wait for ack
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns 0 if it successfully copied message into the buffer and
- * received an ack to that message within delay * timeout period
- **/
-static s32 ixgbevf_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- s32 ret_val;
-
- /* send msg */
- ret_val = mbx->ops.write(hw, msg, size);
-
- /* if msg sent wait until we receive an ack */
- if (!ret_val)
- ret_val = ixgbevf_poll_for_ack(hw);
-
- return ret_val;
-}
-
-/**
- * ixgbevf_read_v2p_mailbox - read v2p mailbox
- * @hw: pointer to the HW structure
- *
- * This function is used to read the v2p mailbox without losing the read to
- * clear status bits.
- **/
-static u32 ixgbevf_read_v2p_mailbox(struct ixgbe_hw *hw)
-{
- u32 v2p_mailbox = IXGBE_READ_REG(hw, IXGBE_VFMAILBOX);
-
- v2p_mailbox |= hw->mbx.v2p_mailbox;
- hw->mbx.v2p_mailbox |= v2p_mailbox & IXGBE_VFMAILBOX_R2C_BITS;
-
- return v2p_mailbox;
-}
-
-/**
- * ixgbevf_check_for_bit_vf - Determine if a status bit was set
- * @hw: pointer to the HW structure
- * @mask: bitmask for bits to be tested and cleared
- *
- * This function is used to check for the read to clear bits within
- * the V2P mailbox.
- **/
-static s32 ixgbevf_check_for_bit_vf(struct ixgbe_hw *hw, u32 mask)
-{
- u32 v2p_mailbox = ixgbevf_read_v2p_mailbox(hw);
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (v2p_mailbox & mask)
- ret_val = 0;
-
- hw->mbx.v2p_mailbox &= ~mask;
-
- return ret_val;
-}
-
-/**
- * ixgbevf_check_for_msg_vf - checks to see if the PF has sent mail
- * @hw: pointer to the HW structure
- *
- * returns 0 if the PF has set the Status bit or else ERR_MBX
- **/
-static s32 ixgbevf_check_for_msg_vf(struct ixgbe_hw *hw)
-{
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFSTS)) {
- ret_val = 0;
- hw->mbx.stats.reqs++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbevf_check_for_ack_vf - checks to see if the PF has ACK'd
- * @hw: pointer to the HW structure
- *
- * returns 0 if the PF has set the ACK bit or else ERR_MBX
- **/
-static s32 ixgbevf_check_for_ack_vf(struct ixgbe_hw *hw)
-{
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (!ixgbevf_check_for_bit_vf(hw, IXGBE_VFMAILBOX_PFACK)) {
- ret_val = 0;
- hw->mbx.stats.acks++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbevf_check_for_rst_vf - checks to see if the PF has reset
- * @hw: pointer to the HW structure
- *
- * returns true if the PF has set the reset done bit or else false
- **/
-static s32 ixgbevf_check_for_rst_vf(struct ixgbe_hw *hw)
-{
- s32 ret_val = IXGBE_ERR_MBX;
-
- if (!ixgbevf_check_for_bit_vf(hw, (IXGBE_VFMAILBOX_RSTD |
- IXGBE_VFMAILBOX_RSTI))) {
- ret_val = 0;
- hw->mbx.stats.rsts++;
- }
-
- return ret_val;
-}
-
-/**
- * ixgbevf_obtain_mbx_lock_vf - obtain mailbox lock
- * @hw: pointer to the HW structure
- *
- * return 0 if we obtained the mailbox lock
- **/
-static s32 ixgbevf_obtain_mbx_lock_vf(struct ixgbe_hw *hw)
-{
- s32 ret_val = IXGBE_ERR_MBX;
-
- /* Take ownership of the buffer */
- IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_VFU);
-
- /* reserve mailbox for vf use */
- if (ixgbevf_read_v2p_mailbox(hw) & IXGBE_VFMAILBOX_VFU)
- ret_val = 0;
-
- return ret_val;
-}
-
-/**
- * ixgbevf_write_mbx_vf - Write a message to the mailbox
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns 0 if it successfully copied message into the buffer
- **/
-static s32 ixgbevf_write_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
-{
- s32 ret_val;
- u16 i;
-
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
- if (ret_val)
- goto out_no_write;
-
- /* flush msg and acks as we are overwriting the message buffer */
- ixgbevf_check_for_msg_vf(hw);
- ixgbevf_check_for_ack_vf(hw);
-
- /* copy the caller specified message to the mailbox memory buffer */
- for (i = 0; i < size; i++)
- IXGBE_WRITE_REG_ARRAY(hw, IXGBE_VFMBMEM, i, msg[i]);
-
- /* update stats */
- hw->mbx.stats.msgs_tx++;
-
- /* Drop VFU and interrupt the PF to tell it a message has been sent */
- IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_REQ);
-
-out_no_write:
- return ret_val;
-}
-
-/**
- * ixgbevf_read_mbx_vf - Reads a message from the inbox intended for vf
- * @hw: pointer to the HW structure
- * @msg: The message buffer
- * @size: Length of buffer
- *
- * returns 0 if it successfuly read message from buffer
- **/
-static s32 ixgbevf_read_mbx_vf(struct ixgbe_hw *hw, u32 *msg, u16 size)
-{
- s32 ret_val = 0;
- u16 i;
-
- /* lock the mailbox to prevent pf/vf race condition */
- ret_val = ixgbevf_obtain_mbx_lock_vf(hw);
- if (ret_val)
- goto out_no_read;
-
- /* copy the message from the mailbox memory buffer */
- for (i = 0; i < size; i++)
- msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_VFMBMEM, i);
-
- /* Acknowledge receipt and release mailbox, then we're done */
- IXGBE_WRITE_REG(hw, IXGBE_VFMAILBOX, IXGBE_VFMAILBOX_ACK);
-
- /* update stats */
- hw->mbx.stats.msgs_rx++;
-
-out_no_read:
- return ret_val;
-}
-
-/**
- * ixgbevf_init_mbx_params_vf - set initial values for vf mailbox
- * @hw: pointer to the HW structure
- *
- * Initializes the hw->mbx struct to correct values for vf mailbox
- */
-static s32 ixgbevf_init_mbx_params_vf(struct ixgbe_hw *hw)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
-
- /* start mailbox as timed out and let the reset_hw call set the timeout
- * value to begin communications */
- mbx->timeout = 0;
- mbx->udelay = IXGBE_VF_MBX_INIT_DELAY;
-
- mbx->size = IXGBE_VFMAILBOX_SIZE;
-
- mbx->stats.msgs_tx = 0;
- mbx->stats.msgs_rx = 0;
- mbx->stats.reqs = 0;
- mbx->stats.acks = 0;
- mbx->stats.rsts = 0;
-
- return 0;
-}
-
-struct ixgbe_mbx_operations ixgbevf_mbx_ops = {
- .init_params = ixgbevf_init_mbx_params_vf,
- .read = ixgbevf_read_mbx_vf,
- .write = ixgbevf_write_mbx_vf,
- .read_posted = ixgbevf_read_posted_mbx,
- .write_posted = ixgbevf_write_posted_mbx,
- .check_for_msg = ixgbevf_check_for_msg_vf,
- .check_for_ack = ixgbevf_check_for_ack_vf,
- .check_for_rst = ixgbevf_check_for_rst_vf,
-};
-
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBE_MBX_H_
-#define _IXGBE_MBX_H_
-
-#include "vf.h"
-
-#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */
-#define IXGBE_ERR_MBX -100
-
-#define IXGBE_VFMAILBOX 0x002FC
-#define IXGBE_VFMBMEM 0x00200
-
-/* Define mailbox register bits */
-#define IXGBE_VFMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */
-#define IXGBE_VFMAILBOX_ACK 0x00000002 /* Ack PF message received */
-#define IXGBE_VFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define IXGBE_VFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define IXGBE_VFMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */
-#define IXGBE_VFMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */
-#define IXGBE_VFMAILBOX_RSTI 0x00000040 /* PF has reset indication */
-#define IXGBE_VFMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */
-#define IXGBE_VFMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */
-
-#define IXGBE_PFMAILBOX(x) (0x04B00 + (4 * x))
-#define IXGBE_PFMBMEM(vfn) (0x13000 + (64 * vfn))
-
-#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */
-#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */
-#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */
-#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */
-#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */
-
-#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */
-#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */
-#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */
-#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */
-
-
-/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the
- * PF. The reverse is true if it is IXGBE_PF_*.
- * Message ACK's are the value or'd with 0xF0000000
- */
-#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with
- * this are the ACK */
-#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with
- * this are the NACK */
-#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still
- * clear to send requests */
-#define IXGBE_VT_MSGINFO_SHIFT 16
-/* bits 23:16 are used for exra info for certain messages */
-#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
-
-#define IXGBE_VF_RESET 0x01 /* VF requests reset */
-#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
-#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
-#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
-#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
-#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
-
-/* length of permanent address message returned from PF */
-#define IXGBE_VF_PERMADDR_MSG_LEN 4
-/* word in permanent address message with the current multicast type */
-#define IXGBE_VF_MC_TYPE_WORD 3
-
-#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */
-
-#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
-#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */
-
-/* forward declaration of the HW struct */
-struct ixgbe_hw;
-
-#endif /* _IXGBE_MBX_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef _IXGBEVF_REGS_H_
-#define _IXGBEVF_REGS_H_
-
-#define IXGBE_VFCTRL 0x00000
-#define IXGBE_VFSTATUS 0x00008
-#define IXGBE_VFLINKS 0x00010
-#define IXGBE_VFFRTIMER 0x00048
-#define IXGBE_VFRXMEMWRAP 0x03190
-#define IXGBE_VTEICR 0x00100
-#define IXGBE_VTEICS 0x00104
-#define IXGBE_VTEIMS 0x00108
-#define IXGBE_VTEIMC 0x0010C
-#define IXGBE_VTEIAC 0x00110
-#define IXGBE_VTEIAM 0x00114
-#define IXGBE_VTEITR(x) (0x00820 + (4 * x))
-#define IXGBE_VTIVAR(x) (0x00120 + (4 * x))
-#define IXGBE_VTIVAR_MISC 0x00140
-#define IXGBE_VTRSCINT(x) (0x00180 + (4 * x))
-#define IXGBE_VFRDBAL(x) (0x01000 + (0x40 * x))
-#define IXGBE_VFRDBAH(x) (0x01004 + (0x40 * x))
-#define IXGBE_VFRDLEN(x) (0x01008 + (0x40 * x))
-#define IXGBE_VFRDH(x) (0x01010 + (0x40 * x))
-#define IXGBE_VFRDT(x) (0x01018 + (0x40 * x))
-#define IXGBE_VFRXDCTL(x) (0x01028 + (0x40 * x))
-#define IXGBE_VFSRRCTL(x) (0x01014 + (0x40 * x))
-#define IXGBE_VFRSCCTL(x) (0x0102C + (0x40 * x))
-#define IXGBE_VFPSRTYPE 0x00300
-#define IXGBE_VFTDBAL(x) (0x02000 + (0x40 * x))
-#define IXGBE_VFTDBAH(x) (0x02004 + (0x40 * x))
-#define IXGBE_VFTDLEN(x) (0x02008 + (0x40 * x))
-#define IXGBE_VFTDH(x) (0x02010 + (0x40 * x))
-#define IXGBE_VFTDT(x) (0x02018 + (0x40 * x))
-#define IXGBE_VFTXDCTL(x) (0x02028 + (0x40 * x))
-#define IXGBE_VFTDWBAL(x) (0x02038 + (0x40 * x))
-#define IXGBE_VFTDWBAH(x) (0x0203C + (0x40 * x))
-#define IXGBE_VFDCA_RXCTRL(x) (0x0100C + (0x40 * x))
-#define IXGBE_VFDCA_TXCTRL(x) (0x0200c + (0x40 * x))
-#define IXGBE_VFGPRC 0x0101C
-#define IXGBE_VFGPTC 0x0201C
-#define IXGBE_VFGORC_LSB 0x01020
-#define IXGBE_VFGORC_MSB 0x01024
-#define IXGBE_VFGOTC_LSB 0x02020
-#define IXGBE_VFGOTC_MSB 0x02024
-#define IXGBE_VFMPRC 0x01034
-
-#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg)))
-
-#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg))
-
-#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) ( \
- writel((value), ((a)->hw_addr + (reg) + ((offset) << 2))))
-
-#define IXGBE_READ_REG_ARRAY(a, reg, offset) ( \
- readl((a)->hw_addr + (reg) + ((offset) << 2)))
-
-#define IXGBE_WRITE_FLUSH(a) (IXGBE_READ_REG(a, IXGBE_VFSTATUS))
-
-#endif /* _IXGBEVF_REGS_H_ */
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#include "vf.h"
-
-/**
- * ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
- * @hw: pointer to hardware structure
- *
- * Starts the hardware by filling the bus info structure and media type, clears
- * all on chip counters, initializes receive address registers, multicast
- * table, VLAN filter table, calls routine to set up link and flow control
- * settings, and leaves transmit and receive units disabled and uninitialized
- **/
-static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
-{
- /* Clear adapter stopped flag */
- hw->adapter_stopped = false;
-
- return 0;
-}
-
-/**
- * ixgbevf_init_hw_vf - virtual function hardware initialization
- * @hw: pointer to hardware structure
- *
- * Initialize the hardware by resetting the hardware and then starting
- * the hardware
- **/
-static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
-{
- s32 status = hw->mac.ops.start_hw(hw);
-
- hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
-
- return status;
-}
-
-/**
- * ixgbevf_reset_hw_vf - Performs hardware reset
- * @hw: pointer to hardware structure
- *
- * Resets the hardware by reseting the transmit and receive units, masks and
- * clears all interrupts.
- **/
-static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- u32 timeout = IXGBE_VF_INIT_TIMEOUT;
- s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
- u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
- u8 *addr = (u8 *)(&msgbuf[1]);
-
- /* Call adapter stop to disable tx/rx and clear interrupts */
- hw->mac.ops.stop_adapter(hw);
-
- IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
- IXGBE_WRITE_FLUSH(hw);
-
- /* we cannot reset while the RSTI / RSTD bits are asserted */
- while (!mbx->ops.check_for_rst(hw) && timeout) {
- timeout--;
- udelay(5);
- }
-
- if (!timeout)
- return IXGBE_ERR_RESET_FAILED;
-
- /* mailbox timeout can now become active */
- mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
-
- msgbuf[0] = IXGBE_VF_RESET;
- mbx->ops.write_posted(hw, msgbuf, 1);
-
- msleep(10);
-
- /* set our "perm_addr" based on info provided by PF */
- /* also set up the mc_filter_type which is piggy backed
- * on the mac address in word 3 */
- ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
- if (ret_val)
- return ret_val;
-
- if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK))
- return IXGBE_ERR_INVALID_MAC_ADDR;
-
- memcpy(hw->mac.perm_addr, addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
- hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
-
- return 0;
-}
-
-/**
- * ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
- * @hw: pointer to hardware structure
- *
- * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
- * disables transmit and receive units. The adapter_stopped flag is used by
- * the shared code and drivers to determine if the adapter is in a stopped
- * state and should not touch the hardware.
- **/
-static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
-{
- u32 number_of_queues;
- u32 reg_val;
- u16 i;
-
- /*
- * Set the adapter_stopped flag so other driver functions stop touching
- * the hardware
- */
- hw->adapter_stopped = true;
-
- /* Disable the receive unit by stopped each queue */
- number_of_queues = hw->mac.max_rx_queues;
- for (i = 0; i < number_of_queues; i++) {
- reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
- if (reg_val & IXGBE_RXDCTL_ENABLE) {
- reg_val &= ~IXGBE_RXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
- }
- }
-
- IXGBE_WRITE_FLUSH(hw);
-
- /* Clear interrupt mask to stop from interrupts being generated */
- IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
-
- /* Clear any pending interrupts */
- IXGBE_READ_REG(hw, IXGBE_VTEICR);
-
- /* Disable the transmit unit. Each queue must be disabled. */
- number_of_queues = hw->mac.max_tx_queues;
- for (i = 0; i < number_of_queues; i++) {
- reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
- if (reg_val & IXGBE_TXDCTL_ENABLE) {
- reg_val &= ~IXGBE_TXDCTL_ENABLE;
- IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
- }
- }
-
- return 0;
-}
-
-/**
- * ixgbevf_mta_vector - Determines bit-vector in multicast table to set
- * @hw: pointer to hardware structure
- * @mc_addr: the multicast address
- *
- * Extracts the 12 bits, from a multicast address, to determine which
- * bit-vector to set in the multicast table. The hardware uses 12 bits, from
- * incoming rx multicast addresses, to determine the bit-vector to check in
- * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
- * by the MO field of the MCSTCTRL. The MO field is set during initialization
- * to mc_filter_type.
- **/
-static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
-{
- u32 vector = 0;
-
- switch (hw->mac.mc_filter_type) {
- case 0: /* use bits [47:36] of the address */
- vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
- break;
- case 1: /* use bits [46:35] of the address */
- vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
- break;
- case 2: /* use bits [45:34] of the address */
- vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
- break;
- case 3: /* use bits [43:32] of the address */
- vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
- break;
- default: /* Invalid mc_filter_type */
- break;
- }
-
- /* vector can only be 12-bits or boundary will be exceeded */
- vector &= 0xFFF;
- return vector;
-}
-
-/**
- * ixgbevf_get_mac_addr_vf - Read device MAC address
- * @hw: pointer to the HW structure
- * @mac_addr: pointer to storage for retrieved MAC address
- **/
-static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
-{
- memcpy(mac_addr, hw->mac.perm_addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
-
- return 0;
-}
-
-static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[3];
- u8 *msg_addr = (u8 *)(&msgbuf[1]);
- s32 ret_val;
-
- memset(msgbuf, 0, sizeof(msgbuf));
- /*
- * If index is one then this is the start of a new list and needs
- * indication to the PF so it can do it's own list management.
- * If it is zero then that tells the PF to just clear all of
- * this VF's macvlans and there is no new list.
- */
- msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
- msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
- if (addr)
- memcpy(msg_addr, addr, 6);
- ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
-
- if (!ret_val)
- ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
-
- msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
-
- if (!ret_val)
- if (msgbuf[0] ==
- (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
- ret_val = -ENOMEM;
-
- return ret_val;
-}
-
-/**
- * ixgbevf_set_rar_vf - set device MAC address
- * @hw: pointer to hardware structure
- * @index: Receive address register to write
- * @addr: Address to put into receive address register
- * @vmdq: Unused in this implementation
- **/
-static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
- u32 vmdq)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[3];
- u8 *msg_addr = (u8 *)(&msgbuf[1]);
- s32 ret_val;
-
- memset(msgbuf, 0, sizeof(msgbuf));
- msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
- memcpy(msg_addr, addr, 6);
- ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
-
- if (!ret_val)
- ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
-
- msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
-
- /* if nacked the address was rejected, use "perm_addr" */
- if (!ret_val &&
- (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
- ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
-
- return ret_val;
-}
-
-/**
- * ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
- * @hw: pointer to the HW structure
- * @netdev: pointer to net device structure
- *
- * Updates the Multicast Table Array.
- **/
-static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
- struct net_device *netdev)
-{
- struct netdev_hw_addr *ha;
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
- u16 *vector_list = (u16 *)&msgbuf[1];
- u32 cnt, i;
-
- /* Each entry in the list uses 1 16 bit word. We have 30
- * 16 bit words available in our HW msg buffer (minus 1 for the
- * msg type). That's 30 hash values if we pack 'em right. If
- * there are more than 30 MC addresses to add then punt the
- * extras for now and then add code to handle more than 30 later.
- * It would be unusual for a server to request that many multi-cast
- * addresses except for in large enterprise network environments.
- */
-
- cnt = netdev_mc_count(netdev);
- if (cnt > 30)
- cnt = 30;
- msgbuf[0] = IXGBE_VF_SET_MULTICAST;
- msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
-
- i = 0;
- netdev_for_each_mc_addr(ha, netdev) {
- if (i == cnt)
- break;
- vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
- }
-
- mbx->ops.write_posted(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
-
- return 0;
-}
-
-/**
- * ixgbevf_set_vfta_vf - Set/Unset vlan filter table address
- * @hw: pointer to the HW structure
- * @vlan: 12 bit VLAN ID
- * @vind: unused by VF drivers
- * @vlan_on: if true then set bit, else clear bit
- **/
-static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
- bool vlan_on)
-{
- struct ixgbe_mbx_info *mbx = &hw->mbx;
- u32 msgbuf[2];
-
- msgbuf[0] = IXGBE_VF_SET_VLAN;
- msgbuf[1] = vlan;
- /* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
- msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
-
- return mbx->ops.write_posted(hw, msgbuf, 2);
-}
-
-/**
- * ixgbevf_setup_mac_link_vf - Setup MAC link settings
- * @hw: pointer to hardware structure
- * @speed: Unused in this implementation
- * @autoneg: Unused in this implementation
- * @autoneg_wait_to_complete: Unused in this implementation
- *
- * Do nothing and return success. VF drivers are not allowed to change
- * global settings. Maintained for driver compatibility.
- **/
-static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
- ixgbe_link_speed speed, bool autoneg,
- bool autoneg_wait_to_complete)
-{
- return 0;
-}
-
-/**
- * ixgbevf_check_mac_link_vf - Get link/speed status
- * @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @link_up: true is link is up, false otherwise
- * @autoneg_wait_to_complete: true when waiting for completion is needed
- *
- * Reads the links register to determine if link is up and the current speed
- **/
-static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *link_up,
- bool autoneg_wait_to_complete)
-{
- u32 links_reg;
-
- if (!(hw->mbx.ops.check_for_rst(hw))) {
- *link_up = false;
- *speed = 0;
- return -1;
- }
-
- links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
-
- if (links_reg & IXGBE_LINKS_UP)
- *link_up = true;
- else
- *link_up = false;
-
- if ((links_reg & IXGBE_LINKS_SPEED_82599) ==
- IXGBE_LINKS_SPEED_10G_82599)
- *speed = IXGBE_LINK_SPEED_10GB_FULL;
- else
- *speed = IXGBE_LINK_SPEED_1GB_FULL;
-
- return 0;
-}
-
-static struct ixgbe_mac_operations ixgbevf_mac_ops = {
- .init_hw = ixgbevf_init_hw_vf,
- .reset_hw = ixgbevf_reset_hw_vf,
- .start_hw = ixgbevf_start_hw_vf,
- .get_mac_addr = ixgbevf_get_mac_addr_vf,
- .stop_adapter = ixgbevf_stop_hw_vf,
- .setup_link = ixgbevf_setup_mac_link_vf,
- .check_link = ixgbevf_check_mac_link_vf,
- .set_rar = ixgbevf_set_rar_vf,
- .update_mc_addr_list = ixgbevf_update_mc_addr_list_vf,
- .set_uc_addr = ixgbevf_set_uc_addr_vf,
- .set_vfta = ixgbevf_set_vfta_vf,
-};
-
-struct ixgbevf_info ixgbevf_82599_vf_info = {
- .mac = ixgbe_mac_82599_vf,
- .mac_ops = &ixgbevf_mac_ops,
-};
-
-struct ixgbevf_info ixgbevf_X540_vf_info = {
- .mac = ixgbe_mac_X540_vf,
- .mac_ops = &ixgbevf_mac_ops,
-};
+++ /dev/null
-/*******************************************************************************
-
- Intel 82599 Virtual Function driver
- Copyright(c) 1999 - 2010 Intel Corporation.
-
- This program is free software; you can redistribute it and/or modify it
- under the terms and conditions of the GNU General Public License,
- version 2, as published by the Free Software Foundation.
-
- This program is distributed in the hope it will be useful, but WITHOUT
- ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- more details.
-
- You should have received a copy of the GNU General Public License along with
- this program; if not, write to the Free Software Foundation, Inc.,
- 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
-
- The full GNU General Public License is included in this distribution in
- the file called "COPYING".
-
- Contact Information:
- e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
- Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
-
-*******************************************************************************/
-
-#ifndef __IXGBE_VF_H__
-#define __IXGBE_VF_H__
-
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/netdevice.h>
-
-#include "defines.h"
-#include "regs.h"
-#include "mbx.h"
-
-struct ixgbe_hw;
-
-/* iterator type for walking multicast address lists */
-typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr,
- u32 *vmdq);
-struct ixgbe_mac_operations {
- s32 (*init_hw)(struct ixgbe_hw *);
- s32 (*reset_hw)(struct ixgbe_hw *);
- s32 (*start_hw)(struct ixgbe_hw *);
- s32 (*clear_hw_cntrs)(struct ixgbe_hw *);
- enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *);
- u32 (*get_supported_physical_layer)(struct ixgbe_hw *);
- s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
- s32 (*stop_adapter)(struct ixgbe_hw *);
- s32 (*get_bus_info)(struct ixgbe_hw *);
-
- /* Link */
- s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool);
- s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool);
- s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *,
- bool *);
-
- /* RAR, Multicast, VLAN */
- s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32);
- s32 (*set_uc_addr)(struct ixgbe_hw *, u32, u8 *);
- s32 (*init_rx_addrs)(struct ixgbe_hw *);
- s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *);
- s32 (*enable_mc)(struct ixgbe_hw *);
- s32 (*disable_mc)(struct ixgbe_hw *);
- s32 (*clear_vfta)(struct ixgbe_hw *);
- s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool);
-};
-
-enum ixgbe_mac_type {
- ixgbe_mac_unknown = 0,
- ixgbe_mac_82599_vf,
- ixgbe_mac_X540_vf,
- ixgbe_num_macs
-};
-
-struct ixgbe_mac_info {
- struct ixgbe_mac_operations ops;
- u8 addr[6];
- u8 perm_addr[6];
-
- enum ixgbe_mac_type type;
-
- s32 mc_filter_type;
-
- bool get_link_status;
- u32 max_tx_queues;
- u32 max_rx_queues;
- u32 max_msix_vectors;
-};
-
-struct ixgbe_mbx_operations {
- s32 (*init_params)(struct ixgbe_hw *hw);
- s32 (*read)(struct ixgbe_hw *, u32 *, u16);
- s32 (*write)(struct ixgbe_hw *, u32 *, u16);
- s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16);
- s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16);
- s32 (*check_for_msg)(struct ixgbe_hw *);
- s32 (*check_for_ack)(struct ixgbe_hw *);
- s32 (*check_for_rst)(struct ixgbe_hw *);
-};
-
-struct ixgbe_mbx_stats {
- u32 msgs_tx;
- u32 msgs_rx;
-
- u32 acks;
- u32 reqs;
- u32 rsts;
-};
-
-struct ixgbe_mbx_info {
- struct ixgbe_mbx_operations ops;
- struct ixgbe_mbx_stats stats;
- u32 timeout;
- u32 udelay;
- u32 v2p_mailbox;
- u16 size;
-};
-
-struct ixgbe_hw {
- void *back;
-
- u8 __iomem *hw_addr;
-
- struct ixgbe_mac_info mac;
- struct ixgbe_mbx_info mbx;
-
- u16 device_id;
- u16 subsystem_vendor_id;
- u16 subsystem_device_id;
- u16 vendor_id;
-
- u8 revision_id;
- bool adapter_stopped;
-};
-
-struct ixgbevf_hw_stats {
- u64 base_vfgprc;
- u64 base_vfgptc;
- u64 base_vfgorc;
- u64 base_vfgotc;
- u64 base_vfmprc;
-
- u64 last_vfgprc;
- u64 last_vfgptc;
- u64 last_vfgorc;
- u64 last_vfgotc;
- u64 last_vfmprc;
-
- u64 vfgprc;
- u64 vfgptc;
- u64 vfgorc;
- u64 vfgotc;
- u64 vfmprc;
-
- u64 saved_reset_vfgprc;
- u64 saved_reset_vfgptc;
- u64 saved_reset_vfgorc;
- u64 saved_reset_vfgotc;
- u64 saved_reset_vfmprc;
-};
-
-struct ixgbevf_info {
- enum ixgbe_mac_type mac;
- struct ixgbe_mac_operations *mac_ops;
-};
-
-#endif /* __IXGBE_VF_H__ */
-
projects / linux-2.6-block.git / commitdiff