be mapped as contiguous chunk into device dma address space. By
specifying this attribute the allocated buffer is forced to be contiguous
also in physical memory.
+
+DMA_ATTR_ALLOC_SINGLE_PAGES
+---------------------------
+
+This is a hint to the DMA-mapping subsystem that it's probably not worth
+the time to try to allocate memory to in a way that gives better TLB
+efficiency (AKA it's not worth trying to build the mapping out of larger
+pages). You might want to specify this if:
+- You know that the accesses to this memory won't thrash the TLB.
+ You might know that the accesses are likely to be sequential or
+ that they aren't sequential but it's unlikely you'll ping-pong
+ between many addresses that are likely to be in different physical
+ pages.
+- You know that the penalty of TLB misses while accessing the
+ memory will be small enough to be inconsequential. If you are
+ doing a heavy operation like decryption or decompression this
+ might be the case.
+- You know that the DMA mapping is fairly transitory. If you expect
+ the mapping to have a short lifetime then it may be worth it to
+ optimize allocation (avoid coming up with large pages) instead of
+ getting the slight performance win of larger pages.
+Setting this hint doesn't guarantee that you won't get huge pages, but it
+means that we won't try quite as hard to get them.
+
+NOTE: At the moment DMA_ATTR_ALLOC_SINGLE_PAGES is only implemented on ARM,
+though ARM64 patches will likely be posted soon.
int (*match)(struct device * dev, struct device_driver * drv);
-match should return '1' if the driver supports the device, and '0'
-otherwise.
+match should return positive value if the driver supports the device,
+and zero otherwise. It may also return error code (for example
+-EPROBE_DEFER) if determining that given driver supports the device is
+not possible.
When a device is registered, the bus's list of drivers is iterated
over. bus->match() is called for each one until a match is found.
select NEED_MACH_IO_H
select NEED_MACH_MEMORY_H
select NO_IOPORT_MAP
- select VIRT_TO_BUS
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
config BL_SWITCHER
bool "big.LITTLE switcher support"
depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
- select ARM_CPU_SUSPEND
select CPU_PM
help
The big.LITTLE "switcher" provides the core functionality to
def_bool y
config ARM_CPU_SUSPEND
- def_bool PM_SLEEP
+ def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
+ depends on ARCH_SUSPEND_POSSIBLE
config ARCH_HIBERNATION_POSSIBLE
bool
# My testing targets (bypasses dependencies)
bp:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/bootpImage
-i zi:; $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
define archhelp
$(call if_changed,objcopy)
@$(kecho) ' Kernel: $@ is ready'
-PHONY += initrd FORCE
+PHONY += initrd
initrd:
@test "$(INITRD_PHYS)" != "" || \
(echo This machine does not support INITRD; exit -1)
$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
$(obj)/uImage System.map "$(INSTALL_PATH)"
-zi:
- $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
- $(obj)/zImage System.map "$(INSTALL_PATH)"
-
-i:
- $(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
- $(obj)/Image System.map "$(INSTALL_PATH)"
-
subdir- := bootp compressed dts
font.c
lib1funcs.S
hyp-stub.S
-piggy.gzip
-piggy.lzo
-piggy.lzma
-piggy.xzkern
-piggy.lz4
+piggy_data
vmlinux
vmlinux.lds
CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)"
-suffix_$(CONFIG_KERNEL_GZIP) = gzip
-suffix_$(CONFIG_KERNEL_LZO) = lzo
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-suffix_$(CONFIG_KERNEL_XZ) = xzkern
-suffix_$(CONFIG_KERNEL_LZ4) = lz4
+compress-$(CONFIG_KERNEL_GZIP) = gzip
+compress-$(CONFIG_KERNEL_LZO) = lzo
+compress-$(CONFIG_KERNEL_LZMA) = lzma
+compress-$(CONFIG_KERNEL_XZ) = xzkern
+compress-$(CONFIG_KERNEL_LZ4) = lz4
# Borrowed libfdt files for the ATAG compatibility mode
OBJS += $(libfdt_objs) atags_to_fdt.o
endif
-targets := vmlinux vmlinux.lds \
- piggy.$(suffix_y) piggy.$(suffix_y).o \
- lib1funcs.o lib1funcs.S ashldi3.o ashldi3.S bswapsdi2.o \
- bswapsdi2.S font.o font.c head.o misc.o $(OBJS)
+targets := vmlinux vmlinux.lds piggy_data piggy.o \
+ lib1funcs.o ashldi3.o bswapsdi2.o \
+ head.o $(OBJS)
-# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma piggy.xzkern piggy.lz4 \
- lib1funcs.S ashldi3.S bswapsdi2.S $(libfdt) $(libfdt_hdrs) \
- hyp-stub.S
+clean-files += piggy_data lib1funcs.S ashldi3.S bswapsdi2.S \
+ $(libfdt) $(libfdt_hdrs) hyp-stub.S
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
$(bswapsdi2) $(efi-obj-y) FORCE
@$(check_for_multiple_zreladdr)
$(call if_changed,ld)
@$(check_for_bad_syms)
-$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
- $(call if_changed,$(suffix_y))
+$(obj)/piggy_data: $(obj)/../Image FORCE
+ $(call if_changed,$(compress-y))
-$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/piggy_data
CFLAGS_font.o := -Dstatic=
--- /dev/null
+ .section .piggydata,#alloc
+ .globl input_data
+input_data:
+ .incbin "arch/arm/boot/compressed/piggy_data"
+ .globl input_data_end
+input_data_end:
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.gzip"
- .globl input_data_end
-input_data_end:
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.lz4"
- .globl input_data_end
-input_data_end:
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.lzma"
- .globl input_data_end
-input_data_end:
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.lzo"
- .globl input_data_end
-input_data_end:
+++ /dev/null
- .section .piggydata,#alloc
- .globl input_data
-input_data:
- .incbin "arch/arm/boot/compressed/piggy.xzkern"
- .globl input_data_end
-input_data_end:
struct sa1111_dev *dev = SA1111_DEV(_dev);
struct sa1111_driver *drv = SA1111_DRV(_drv);
- return dev->devid & drv->devid;
+ return !!(dev->devid & drv->devid);
}
static int sa1111_bus_suspend(struct device *dev, pm_message_t state)
generic-y += resource.h
generic-y += rwsem.h
generic-y += seccomp.h
-generic-y += sections.h
generic-y += segment.h
generic-y += sembuf.h
generic-y += serial.h
static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
{
unsigned long long res;
- unsigned int tmp = 0;
+ register unsigned int tmp asm("ip") = 0;
if (!bias) {
asm ( "umull %Q0, %R0, %Q1, %Q2\n\t"
: "r" (m), "r" (n)
: "cc");
} else {
- asm ( "umull %Q0, %R0, %Q1, %Q2\n\t"
- "cmn %Q0, %Q1\n\t"
- "adcs %R0, %R0, %R1\n\t"
- "adc %Q0, %3, #0"
- : "=&r" (res)
- : "r" (m), "r" (n), "r" (tmp)
+ asm ( "umull %Q0, %R0, %Q2, %Q3\n\t"
+ "cmn %Q0, %Q2\n\t"
+ "adcs %R0, %R0, %R2\n\t"
+ "adc %Q0, %1, #0"
+ : "=&r" (res), "+&r" (tmp)
+ : "r" (m), "r" (n)
: "cc");
}
*/
#define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
+#ifdef CONFIG_XIP_KERNEL
+/*
+ * When referencing data in RAM from the XIP region in a relative manner
+ * with the MMU off, we need the relative offset between the two physical
+ * addresses. The macro below achieves this, which is:
+ * __pa(v_data) - __xip_pa(v_text)
+ */
+#define PHYS_RELATIVE(v_data, v_text) \
+ (((v_data) - PAGE_OFFSET + PLAT_PHYS_OFFSET) - \
+ ((v_text) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR) + \
+ CONFIG_XIP_PHYS_ADDR))
+#else
+#define PHYS_RELATIVE(v_data, v_text) ((v_data) - (v_text))
+#endif
+
#ifndef __ASSEMBLY__
/*
#define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
#define pfn_to_kaddr(pfn) __va((phys_addr_t)(pfn) << PAGE_SHIFT)
-extern phys_addr_t (*arch_virt_to_idmap)(unsigned long x);
+extern unsigned long (*arch_virt_to_idmap)(unsigned long x);
/*
* These are for systems that have a hardware interconnect supported alias of
* physical memory for idmap purposes. Most cases should leave these
- * untouched.
+ * untouched. Note: this can only return addresses less than 4GiB.
*/
-static inline phys_addr_t __virt_to_idmap(unsigned long x)
+static inline unsigned long __virt_to_idmap(unsigned long x)
{
if (IS_ENABLED(CONFIG_MMU) && arch_virt_to_idmap)
return arch_virt_to_idmap(x);
#define __bus_to_pfn(x) __phys_to_pfn(x)
#endif
-#ifdef CONFIG_VIRT_TO_BUS
-#define virt_to_bus virt_to_bus
-static inline __deprecated unsigned long virt_to_bus(void *x)
-{
- return __virt_to_bus((unsigned long)x);
-}
-
-#define bus_to_virt bus_to_virt
-static inline __deprecated void *bus_to_virt(unsigned long x)
-{
- return (void *)__bus_to_virt(x);
-}
-#endif
-
/*
* Conversion between a struct page and a physical address.
*
#ifdef CONFIG_CPU_HAS_ASID
void check_and_switch_context(struct mm_struct *mm, struct task_struct *tsk);
-#define init_new_context(tsk,mm) ({ atomic64_set(&(mm)->context.id, 0); 0; })
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ atomic64_set(&mm->context.id, 0);
+ return 0;
+}
#ifdef CONFIG_ARM_ERRATA_798181
void a15_erratum_get_cpumask(int this_cpu, struct mm_struct *mm,
#endif /* CONFIG_MMU */
-#define init_new_context(tsk,mm) 0
+static inline int
+init_new_context(struct task_struct *tsk, struct mm_struct *mm)
+{
+ return 0;
+}
+
#endif /* CONFIG_CPU_HAS_ASID */
--- /dev/null
+#ifndef _ASM_ARM_SECTIONS_H
+#define _ASM_ARM_SECTIONS_H
+
+#include <asm-generic/sections.h>
+
+extern char _exiprom[];
+
+#endif /* _ASM_ARM_SECTIONS_H */
* Eg, if you have 2 banks of up to 64MB at 0x80000000, 0x84000000,
* then MAX_PHYSMEM_BITS is 32, SECTION_SIZE_BITS is 26.
*
- * Define these in your mach/memory.h.
+ * These can be overridden in your mach/memory.h.
*/
-#if !defined(SECTION_SIZE_BITS) || !defined(MAX_PHYSMEM_BITS)
-#error Sparsemem is not supported on this platform
+#if !defined(MAX_PHYSMEM_BITS) || !defined(SECTION_SIZE_BITS)
+#define MAX_PHYSMEM_BITS 36
+#define SECTION_SIZE_BITS 28
#endif
#endif
.endm
.section .stubs, "ax", %progbits
-__stubs_start:
@ This must be the first word
.word vector_swi
.long __fiq_svc @ e
.long __fiq_svc @ f
- .globl vector_fiq_offset
- .equ vector_fiq_offset, vector_fiq
+ .globl vector_fiq
.section .vectors, "ax", %progbits
-__vectors_start:
+.L__vectors_start:
W(b) vector_rst
W(b) vector_und
- W(ldr) pc, __vectors_start + 0x1000
+ W(ldr) pc, .L__vectors_start + 0x1000
W(b) vector_pabt
W(b) vector_dabt
W(b) vector_addrexcptn
ret = swsusp_save();
if (ret == 0)
- _soft_restart(virt_to_phys(cpu_resume), false);
+ _soft_restart(virt_to_idmap(cpu_resume), false);
return ret;
}
for (pbe = restore_pblist; pbe; pbe = pbe->next)
copy_page(pbe->orig_address, pbe->address);
- _soft_restart(virt_to_phys(cpu_resume), false);
+ _soft_restart(virt_to_idmap(cpu_resume), false);
}
static u64 resume_stack[PAGE_SIZE/2/sizeof(u64)] __nosavedata;
*/
#include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/virt.h>
bic r7, #1 @ Clear ENABLE
mcr p15, 0, r7, c14, c3, 1 @ CNTV_CTL
1:
+#endif
+
+#ifdef CONFIG_ARM_GIC_V3
+ @ Check whether GICv3 system registers are available
+ mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1
+ ubfx r7, r7, #28, #4
+ cmp r7, #1
+ bne 2f
+
+ @ Enable system register accesses
+ mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE
+ orr r7, r7, #(ICC_SRE_EL2_ENABLE | ICC_SRE_EL2_SRE)
+ mcr p15, 4, r7, c12, c9, 5 @ ICC_HSRE
+ isb
+
+ @ SRE bit could be forced to 0 by firmware.
+ @ Check whether it sticks before accessing any other sysreg
+ mrc p15, 4, r7, c12, c9, 5 @ ICC_HSRE
+ tst r7, #ICC_SRE_EL2_SRE
+ beq 2f
+ mov r7, #0
+ mcr p15, 4, r7, c12, c11, 0 @ ICH_HCR
+2:
#endif
bx lr @ The boot CPU mode is left in r4.
outer_cache.write_sec = machine_desc->l2c_write_sec;
ret = l2x0_of_init(machine_desc->l2c_aux_val,
machine_desc->l2c_aux_mask);
- if (ret)
+ if (ret && ret != -ENODEV)
pr_err("L2C: failed to init: %d\n", ret);
}
void machine_kexec(struct kimage *image)
{
- unsigned long page_list;
- unsigned long reboot_code_buffer_phys;
- unsigned long reboot_entry = (unsigned long)relocate_new_kernel;
- unsigned long reboot_entry_phys;
+ unsigned long page_list, reboot_entry_phys;
+ void (*reboot_entry)(void);
void *reboot_code_buffer;
/*
page_list = image->head & PAGE_MASK;
- /* we need both effective and real address here */
- reboot_code_buffer_phys =
- page_to_pfn(image->control_code_page) << PAGE_SHIFT;
reboot_code_buffer = page_address(image->control_code_page);
/* Prepare parameters for reboot_code_buffer*/
/* copy our kernel relocation code to the control code page */
reboot_entry = fncpy(reboot_code_buffer,
- reboot_entry,
+ &relocate_new_kernel,
relocate_new_kernel_size);
- reboot_entry_phys = (unsigned long)reboot_entry +
- (reboot_code_buffer_phys - (unsigned long)reboot_code_buffer);
+
+ /* get the identity mapping physical address for the reboot code */
+ reboot_entry_phys = virt_to_idmap(reboot_entry);
pr_info("Bye!\n");
* recompiling the whole kernel when CONFIG_XIP_KERNEL is turned on/off.
*/
#undef MODULES_VADDR
-#define MODULES_VADDR (((unsigned long)_etext + ~PMD_MASK) & PMD_MASK)
+#define MODULES_VADDR (((unsigned long)_exiprom + ~PMD_MASK) & PMD_MASK)
#endif
#ifdef CONFIG_MMU
flush_cache_all();
/* Switch to the identity mapping. */
- phys_reset = (phys_reset_t)(unsigned long)virt_to_idmap(cpu_reset);
+ phys_reset = (phys_reset_t)virt_to_idmap(cpu_reset);
phys_reset((unsigned long)addr);
/* Should never get here. */
* to run the rebalance_domains for all idle cores and the cpu_capacity can be
* updated during this sequence.
*/
-static DEFINE_PER_CPU(unsigned long, cpu_scale);
+static DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
unsigned long arch_scale_cpu_capacity(struct sched_domain *sd, int cpu)
{
cpu_topo->socket_id = -1;
cpumask_clear(&cpu_topo->core_sibling);
cpumask_clear(&cpu_topo->thread_sibling);
-
- set_capacity_scale(cpu, SCHED_CAPACITY_SCALE);
}
smp_wmb();
--- /dev/null
+/* ld script to make ARM Linux kernel
+ * taken from the i386 version by Russell King
+ * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ */
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+#include <asm/memory.h>
+#include <asm/page.h>
+
+#define PROC_INFO \
+ . = ALIGN(4); \
+ VMLINUX_SYMBOL(__proc_info_begin) = .; \
+ *(.proc.info.init) \
+ VMLINUX_SYMBOL(__proc_info_end) = .;
+
+#define IDMAP_TEXT \
+ ALIGN_FUNCTION(); \
+ VMLINUX_SYMBOL(__idmap_text_start) = .; \
+ *(.idmap.text) \
+ VMLINUX_SYMBOL(__idmap_text_end) = .; \
+ . = ALIGN(PAGE_SIZE); \
+ VMLINUX_SYMBOL(__hyp_idmap_text_start) = .; \
+ *(.hyp.idmap.text) \
+ VMLINUX_SYMBOL(__hyp_idmap_text_end) = .;
+
+#ifdef CONFIG_HOTPLUG_CPU
+#define ARM_CPU_DISCARD(x)
+#define ARM_CPU_KEEP(x) x
+#else
+#define ARM_CPU_DISCARD(x) x
+#define ARM_CPU_KEEP(x)
+#endif
+
+#if (defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)) || \
+ defined(CONFIG_GENERIC_BUG)
+#define ARM_EXIT_KEEP(x) x
+#define ARM_EXIT_DISCARD(x)
+#else
+#define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x) x
+#endif
+
+OUTPUT_ARCH(arm)
+ENTRY(stext)
+
+#ifndef __ARMEB__
+jiffies = jiffies_64;
+#else
+jiffies = jiffies_64 + 4;
+#endif
+
+SECTIONS
+{
+ /*
+ * XXX: The linker does not define how output sections are
+ * assigned to input sections when there are multiple statements
+ * matching the same input section name. There is no documented
+ * order of matching.
+ *
+ * unwind exit sections must be discarded before the rest of the
+ * unwind sections get included.
+ */
+ /DISCARD/ : {
+ *(.ARM.exidx.exit.text)
+ *(.ARM.extab.exit.text)
+ ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
+ ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+ ARM_EXIT_DISCARD(EXIT_TEXT)
+ ARM_EXIT_DISCARD(EXIT_DATA)
+ EXIT_CALL
+#ifndef CONFIG_MMU
+ *(.text.fixup)
+ *(__ex_table)
+#endif
+#ifndef CONFIG_SMP_ON_UP
+ *(.alt.smp.init)
+#endif
+ *(.discard)
+ *(.discard.*)
+ }
+
+ . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+ _xiprom = .; /* XIP ROM area to be mapped */
+
+ .head.text : {
+ _text = .;
+ HEAD_TEXT
+ }
+
+ .text : { /* Real text segment */
+ _stext = .; /* Text and read-only data */
+ IDMAP_TEXT
+ __exception_text_start = .;
+ *(.exception.text)
+ __exception_text_end = .;
+ IRQENTRY_TEXT
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ *(.gnu.warning)
+ *(.glue_7)
+ *(.glue_7t)
+ . = ALIGN(4);
+ *(.got) /* Global offset table */
+ ARM_CPU_KEEP(PROC_INFO)
+ }
+
+ RO_DATA(PAGE_SIZE)
+
+ . = ALIGN(4);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+#ifdef CONFIG_MMU
+ *(__ex_table)
+#endif
+ __stop___ex_table = .;
+ }
+
+#ifdef CONFIG_ARM_UNWIND
+ /*
+ * Stack unwinding tables
+ */
+ . = ALIGN(8);
+ .ARM.unwind_idx : {
+ __start_unwind_idx = .;
+ *(.ARM.exidx*)
+ __stop_unwind_idx = .;
+ }
+ .ARM.unwind_tab : {
+ __start_unwind_tab = .;
+ *(.ARM.extab*)
+ __stop_unwind_tab = .;
+ }
+#endif
+
+ NOTES
+
+ _etext = .; /* End of text and rodata section */
+
+ /*
+ * The vectors and stubs are relocatable code, and the
+ * only thing that matters is their relative offsets
+ */
+ __vectors_start = .;
+ .vectors 0xffff0000 : AT(__vectors_start) {
+ *(.vectors)
+ }
+ . = __vectors_start + SIZEOF(.vectors);
+ __vectors_end = .;
+
+ __stubs_start = .;
+ .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
+ *(.stubs)
+ }
+ . = __stubs_start + SIZEOF(.stubs);
+ __stubs_end = .;
+
+ PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
+ INIT_TEXT_SECTION(8)
+ .exit.text : {
+ ARM_EXIT_KEEP(EXIT_TEXT)
+ }
+ .init.proc.info : {
+ ARM_CPU_DISCARD(PROC_INFO)
+ }
+ .init.arch.info : {
+ __arch_info_begin = .;
+ *(.arch.info.init)
+ __arch_info_end = .;
+ }
+ .init.tagtable : {
+ __tagtable_begin = .;
+ *(.taglist.init)
+ __tagtable_end = .;
+ }
+#ifdef CONFIG_SMP_ON_UP
+ .init.smpalt : {
+ __smpalt_begin = .;
+ *(.alt.smp.init)
+ __smpalt_end = .;
+ }
+#endif
+ .init.pv_table : {
+ __pv_table_begin = .;
+ *(.pv_table)
+ __pv_table_end = .;
+ }
+ .init.data : {
+ INIT_SETUP(16)
+ INIT_CALLS
+ CON_INITCALL
+ SECURITY_INITCALL
+ INIT_RAM_FS
+ }
+
+#ifdef CONFIG_SMP
+ PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+ _exiprom = .; /* End of XIP ROM area */
+ __data_loc = ALIGN(4); /* location in binary */
+ . = PAGE_OFFSET + TEXT_OFFSET;
+
+ .data : AT(__data_loc) {
+ _data = .; /* address in memory */
+ _sdata = .;
+
+ /*
+ * first, the init task union, aligned
+ * to an 8192 byte boundary.
+ */
+ INIT_TASK_DATA(THREAD_SIZE)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ INIT_DATA
+ ARM_EXIT_KEEP(EXIT_DATA)
+ . = ALIGN(PAGE_SIZE);
+ __init_end = .;
+
+ NOSAVE_DATA
+ CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+ READ_MOSTLY_DATA(L1_CACHE_BYTES)
+
+ /*
+ * and the usual data section
+ */
+ DATA_DATA
+ CONSTRUCTORS
+
+ _edata = .;
+ }
+ _edata_loc = __data_loc + SIZEOF(.data);
+
+#ifdef CONFIG_HAVE_TCM
+ /*
+ * We align everything to a page boundary so we can
+ * free it after init has commenced and TCM contents have
+ * been copied to its destination.
+ */
+ .tcm_start : {
+ . = ALIGN(PAGE_SIZE);
+ __tcm_start = .;
+ __itcm_start = .;
+ }
+
+ /*
+ * Link these to the ITCM RAM
+ * Put VMA to the TCM address and LMA to the common RAM
+ * and we'll upload the contents from RAM to TCM and free
+ * the used RAM after that.
+ */
+ .text_itcm ITCM_OFFSET : AT(__itcm_start)
+ {
+ __sitcm_text = .;
+ *(.tcm.text)
+ *(.tcm.rodata)
+ . = ALIGN(4);
+ __eitcm_text = .;
+ }
+
+ /*
+ * Reset the dot pointer, this is needed to create the
+ * relative __dtcm_start below (to be used as extern in code).
+ */
+ . = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+ .dtcm_start : {
+ __dtcm_start = .;
+ }
+
+ /* TODO: add remainder of ITCM as well, that can be used for data! */
+ .data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+ {
+ . = ALIGN(4);
+ __sdtcm_data = .;
+ *(.tcm.data)
+ . = ALIGN(4);
+ __edtcm_data = .;
+ }
+
+ /* Reset the dot pointer or the linker gets confused */
+ . = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+ /* End marker for freeing TCM copy in linked object */
+ .tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+ . = ALIGN(PAGE_SIZE);
+ __tcm_end = .;
+ }
+#endif
+
+ BSS_SECTION(0, 0, 0)
+ _end = .;
+
+ STABS_DEBUG
+}
+
+/*
+ * These must never be empty
+ * If you have to comment these two assert statements out, your
+ * binutils is too old (for other reasons as well)
+ */
+ASSERT((__proc_info_end - __proc_info_begin), "missing CPU support")
+ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
+
+/*
+ * The HYP init code can't be more than a page long,
+ * and should not cross a page boundary.
+ * The above comment applies as well.
+ */
+ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
+ "HYP init code too big or misaligned")
* Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*/
+#ifdef CONFIG_XIP_KERNEL
+#include "vmlinux-xip.lds.S"
+#else
+
#include <asm-generic/vmlinux.lds.h>
#include <asm/cache.h>
#include <asm/thread_info.h>
#include <asm/memory.h>
#include <asm/page.h>
-#ifdef CONFIG_ARM_KERNMEM_PERMS
#include <asm/pgtable.h>
-#endif
#define PROC_INFO \
. = ALIGN(4); \
*(.discard.*)
}
-#ifdef CONFIG_XIP_KERNEL
- . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
. = PAGE_OFFSET + TEXT_OFFSET;
-#endif
.head.text : {
_text = .;
HEAD_TEXT
}
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
. = ALIGN(1<<SECTION_SHIFT);
#endif
ARM_CPU_KEEP(PROC_INFO)
}
-#ifdef CONFIG_DEBUG_RODATA
+#ifdef CONFIG_DEBUG_ALIGN_RODATA
. = ALIGN(1<<SECTION_SHIFT);
#endif
RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
-#ifndef CONFIG_XIP_KERNEL
-# ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
. = ALIGN(1<<SECTION_SHIFT);
-# else
+#else
. = ALIGN(PAGE_SIZE);
-# endif
- __init_begin = .;
#endif
+ __init_begin = .;
+
/*
* The vectors and stubs are relocatable code, and the
* only thing that matters is their relative offsets
*/
__vectors_start = .;
- .vectors 0 : AT(__vectors_start) {
+ .vectors 0xffff0000 : AT(__vectors_start) {
*(.vectors)
}
. = __vectors_start + SIZEOF(.vectors);
__vectors_end = .;
__stubs_start = .;
- .stubs 0x1000 : AT(__stubs_start) {
+ .stubs ADDR(.vectors) + 0x1000 : AT(__stubs_start) {
*(.stubs)
}
. = __stubs_start + SIZEOF(.stubs);
__stubs_end = .;
+ PROVIDE(vector_fiq_offset = vector_fiq - ADDR(.vectors));
+
INIT_TEXT_SECTION(8)
.exit.text : {
ARM_EXIT_KEEP(EXIT_TEXT)
__pv_table_end = .;
}
.init.data : {
-#ifndef CONFIG_XIP_KERNEL
INIT_DATA
-#endif
INIT_SETUP(16)
INIT_CALLS
CON_INITCALL
SECURITY_INITCALL
INIT_RAM_FS
}
-#ifndef CONFIG_XIP_KERNEL
.exit.data : {
ARM_EXIT_KEEP(EXIT_DATA)
}
-#endif
#ifdef CONFIG_SMP
PERCPU_SECTION(L1_CACHE_BYTES)
#endif
-#ifdef CONFIG_XIP_KERNEL
- __data_loc = ALIGN(4); /* location in binary */
- . = PAGE_OFFSET + TEXT_OFFSET;
-#else
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
. = ALIGN(1<<SECTION_SHIFT);
#else
. = ALIGN(THREAD_SIZE);
#endif
__init_end = .;
__data_loc = .;
-#endif
.data : AT(__data_loc) {
_data = .; /* address in memory */
*/
INIT_TASK_DATA(THREAD_SIZE)
-#ifdef CONFIG_XIP_KERNEL
- . = ALIGN(PAGE_SIZE);
- __init_begin = .;
- INIT_DATA
- ARM_EXIT_KEEP(EXIT_DATA)
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-#endif
-
NOSAVE_DATA
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
READ_MOSTLY_DATA(L1_CACHE_BYTES)
STABS_DEBUG
}
+#ifdef CONFIG_DEBUG_RODATA
+/*
+ * Without CONFIG_DEBUG_ALIGN_RODATA, __start_rodata_section_aligned will
+ * be the first section-aligned location after __start_rodata. Otherwise,
+ * it will be equal to __start_rodata.
+ */
+__start_rodata_section_aligned = ALIGN(__start_rodata, 1 << SECTION_SHIFT);
+#endif
+
/*
* These must never be empty
* If you have to comment these two assert statements out, your
*/
ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
"HYP init code too big or misaligned")
+
+#endif /* CONFIG_XIP_KERNEL */
u32 *uart;
/* PORT_16C550A, in polled non-fifo mode */
-static void putc(char c)
+static inline void putc(char c)
{
if (!uart)
return;
select ISA
select ISA_DMA
select PCI
- select VIRT_TO_BUS
help
Say Y here if you intend to run this kernel on the Rebel.COM
NetWinder. Information about this machine can be found at:
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
-static phys_addr_t keystone_virt_to_idmap(unsigned long x)
+static unsigned long keystone_virt_to_idmap(unsigned long x)
{
return (phys_addr_t)(x) - CONFIG_PAGE_OFFSET + KEYSTONE_LOW_PHYS_START;
}
#include <linux/io.h>
#include <mach/regs-uart.h>
-static void putc(char c)
+static inline void putc(char c)
{
while (!(__raw_readl((void __iomem*)KS8695_UART_PA + KS8695_URLS) & URLS_URTHRE))
barrier();
#define FR_BUSY (1<<3)
#define FR_TXFF (1<<5)
-static void putc(char c)
+static inline void putc(char c)
{
unsigned long base;
*uart_info = port;
}
-static void putc(int c)
+static inline void putc(int c)
{
if (!uart_base)
return;
/*
* This does not append a newline
*/
-static void putc(int c)
+static inline void putc(int c)
{
extern void ll_write_char(char *, char c, char white);
int x,y;
#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-static void putc(int c)
+static inline void putc(int c)
{
unsigned long serial_port;
#define TX_DONE (UART_LSR_TEMT | UART_LSR_THRE)
static volatile u32 * const uart_base = (u32 *)UART0_PA;
-static void putc(int ch)
+static inline void putc(int ch)
{
/* Check THRE and TEMT bits before we transmit the character.
*/
This option specifies the architecture can support big endian
operation.
-config ARM_KERNMEM_PERMS
- bool "Restrict kernel memory permissions"
- depends on MMU
- help
- If this is set, kernel memory other than kernel text (and rodata)
- will be made non-executable. The tradeoff is that each region is
- padded to section-size (1MiB) boundaries (because their permissions
- are different and splitting the 1M pages into 4K ones causes TLB
- performance problems), wasting memory.
-
config DEBUG_RODATA
bool "Make kernel text and rodata read-only"
- depends on ARM_KERNMEM_PERMS
+ depends on MMU && !XIP_KERNEL
+ default y if CPU_V7
+ help
+ If this is set, kernel text and rodata memory will be made
+ read-only, and non-text kernel memory will be made non-executable.
+ The tradeoff is that each region is padded to section-size (1MiB)
+ boundaries (because their permissions are different and splitting
+ the 1M pages into 4K ones causes TLB performance problems), which
+ can waste memory.
+
+config DEBUG_ALIGN_RODATA
+ bool "Make rodata strictly non-executable"
+ depends on DEBUG_RODATA
default y
help
- If this is set, kernel text and rodata will be made read-only. This
- is to help catch accidental or malicious attempts to change the
- kernel's executable code. Additionally splits rodata from kernel
- text so it can be made explicitly non-executable. This creates
- another section-size padded region, so it can waste more memory
- space while gaining the read-only protections.
+ If this is set, rodata will be made explicitly non-executable. This
+ provides protection on the rare chance that attackers might find and
+ use ROP gadgets that exist in the rodata section. This adds an
+ additional section-aligned split of rodata from kernel text so it
+ can be made explicitly non-executable. This padding may waste memory
+ space to gain the additional protection.
#include <asm/cputype.h>
#include <asm/hardware/cache-tauros2.h>
+/* CP15 PJ4 Control configuration register */
+#define CCR_L2C_PREFETCH_DISABLE BIT(24)
+#define CCR_L2C_ECC_ENABLE BIT(23)
+#define CCR_L2C_WAY7_4_DISABLE BIT(21)
+#define CCR_L2C_BURST8_ENABLE BIT(20)
/*
* When Tauros2 is used on a CPU that supports the v7 hierarchical
u = read_extra_features();
if (features & CACHE_TAUROS2_PREFETCH_ON)
- u &= ~0x01000000;
+ u &= ~CCR_L2C_PREFETCH_DISABLE;
else
- u |= 0x01000000;
+ u |= CCR_L2C_PREFETCH_DISABLE;
pr_info("Tauros2: %s L2 prefetch.\n",
(features & CACHE_TAUROS2_PREFETCH_ON)
? "Enabling" : "Disabling");
if (features & CACHE_TAUROS2_LINEFILL_BURST8)
- u |= 0x00100000;
+ u |= CCR_L2C_BURST8_ENABLE;
else
- u &= ~0x00100000;
- pr_info("Tauros2: %s line fill burt8.\n",
+ u &= ~CCR_L2C_BURST8_ENABLE;
+ pr_info("Tauros2: %s burst8 line fill.\n",
(features & CACHE_TAUROS2_LINEFILL_BURST8)
? "Enabling" : "Disabling");
node = of_find_matching_node(NULL, tauros2_ids);
if (!node) {
pr_info("Not found marvell,tauros2-cache, disable it\n");
- return;
+ } else {
+ ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
+ if (ret) {
+ pr_info("Not found marvell,tauros-cache-features property, "
+ "disable extra features\n");
+ features = 0;
+ } else
+ features = f;
}
-
- ret = of_property_read_u32(node, "marvell,tauros2-cache-features", &f);
- if (ret) {
- pr_info("Not found marvell,tauros-cache-features property, "
- "disable extra features\n");
- features = 0;
- } else
- features = f;
#endif
tauros2_internal_init(features);
}
#include "dma.h"
#include "mm.h"
+struct arm_dma_alloc_args {
+ struct device *dev;
+ size_t size;
+ gfp_t gfp;
+ pgprot_t prot;
+ const void *caller;
+ bool want_vaddr;
+};
+
+struct arm_dma_free_args {
+ struct device *dev;
+ size_t size;
+ void *cpu_addr;
+ struct page *page;
+ bool want_vaddr;
+};
+
+struct arm_dma_allocator {
+ void *(*alloc)(struct arm_dma_alloc_args *args,
+ struct page **ret_page);
+ void (*free)(struct arm_dma_free_args *args);
+};
+
+struct arm_dma_buffer {
+ struct list_head list;
+ void *virt;
+ struct arm_dma_allocator *allocator;
+};
+
+static LIST_HEAD(arm_dma_bufs);
+static DEFINE_SPINLOCK(arm_dma_bufs_lock);
+
+static struct arm_dma_buffer *arm_dma_buffer_find(void *virt)
+{
+ struct arm_dma_buffer *buf, *found = NULL;
+ unsigned long flags;
+
+ spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+ list_for_each_entry(buf, &arm_dma_bufs, list) {
+ if (buf->virt == virt) {
+ list_del(&buf->list);
+ found = buf;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+ return found;
+}
+
/*
* The DMA API is built upon the notion of "buffer ownership". A buffer
* is either exclusively owned by the CPU (and therefore may be accessed
#define __alloc_remap_buffer(dev, size, gfp, prot, ret, c, wv) NULL
#define __alloc_from_pool(size, ret_page) NULL
#define __alloc_from_contiguous(dev, size, prot, ret, c, wv) NULL
-#define __free_from_pool(cpu_addr, size) 0
+#define __free_from_pool(cpu_addr, size) do { } while (0)
#define __free_from_contiguous(dev, page, cpu_addr, size, wv) do { } while (0)
#define __dma_free_remap(cpu_addr, size) do { } while (0)
return page_address(page);
}
+static void *simple_allocator_alloc(struct arm_dma_alloc_args *args,
+ struct page **ret_page)
+{
+ return __alloc_simple_buffer(args->dev, args->size, args->gfp,
+ ret_page);
+}
+
+static void simple_allocator_free(struct arm_dma_free_args *args)
+{
+ __dma_free_buffer(args->page, args->size);
+}
+static struct arm_dma_allocator simple_allocator = {
+ .alloc = simple_allocator_alloc,
+ .free = simple_allocator_free,
+};
+
+static void *cma_allocator_alloc(struct arm_dma_alloc_args *args,
+ struct page **ret_page)
+{
+ return __alloc_from_contiguous(args->dev, args->size, args->prot,
+ ret_page, args->caller,
+ args->want_vaddr);
+}
+
+static void cma_allocator_free(struct arm_dma_free_args *args)
+{
+ __free_from_contiguous(args->dev, args->page, args->cpu_addr,
+ args->size, args->want_vaddr);
+}
+
+static struct arm_dma_allocator cma_allocator = {
+ .alloc = cma_allocator_alloc,
+ .free = cma_allocator_free,
+};
+
+static void *pool_allocator_alloc(struct arm_dma_alloc_args *args,
+ struct page **ret_page)
+{
+ return __alloc_from_pool(args->size, ret_page);
+}
+
+static void pool_allocator_free(struct arm_dma_free_args *args)
+{
+ __free_from_pool(args->cpu_addr, args->size);
+}
+
+static struct arm_dma_allocator pool_allocator = {
+ .alloc = pool_allocator_alloc,
+ .free = pool_allocator_free,
+};
+
+static void *remap_allocator_alloc(struct arm_dma_alloc_args *args,
+ struct page **ret_page)
+{
+ return __alloc_remap_buffer(args->dev, args->size, args->gfp,
+ args->prot, ret_page, args->caller,
+ args->want_vaddr);
+}
+
+static void remap_allocator_free(struct arm_dma_free_args *args)
+{
+ if (args->want_vaddr)
+ __dma_free_remap(args->cpu_addr, args->size);
+
+ __dma_free_buffer(args->page, args->size);
+}
+
+static struct arm_dma_allocator remap_allocator = {
+ .alloc = remap_allocator_alloc,
+ .free = remap_allocator_free,
+};
static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
gfp_t gfp, pgprot_t prot, bool is_coherent,
u64 mask = get_coherent_dma_mask(dev);
struct page *page = NULL;
void *addr;
- bool want_vaddr;
+ bool allowblock, cma;
+ struct arm_dma_buffer *buf;
+ struct arm_dma_alloc_args args = {
+ .dev = dev,
+ .size = PAGE_ALIGN(size),
+ .gfp = gfp,
+ .prot = prot,
+ .caller = caller,
+ .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs),
+ };
#ifdef CONFIG_DMA_API_DEBUG
u64 limit = (mask + 1) & ~mask;
if (!mask)
return NULL;
+ buf = kzalloc(sizeof(*buf), gfp);
+ if (!buf)
+ return NULL;
+
if (mask < 0xffffffffULL)
gfp |= GFP_DMA;
* platform; see CONFIG_HUGETLBFS.
*/
gfp &= ~(__GFP_COMP);
+ args.gfp = gfp;
*handle = DMA_ERROR_CODE;
- size = PAGE_ALIGN(size);
- want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
- if (nommu())
- addr = __alloc_simple_buffer(dev, size, gfp, &page);
- else if (dev_get_cma_area(dev) && (gfp & __GFP_DIRECT_RECLAIM))
- addr = __alloc_from_contiguous(dev, size, prot, &page,
- caller, want_vaddr);
- else if (is_coherent)
- addr = __alloc_simple_buffer(dev, size, gfp, &page);
- else if (!gfpflags_allow_blocking(gfp))
- addr = __alloc_from_pool(size, &page);
+ allowblock = gfpflags_allow_blocking(gfp);
+ cma = allowblock ? dev_get_cma_area(dev) : false;
+
+ if (cma)
+ buf->allocator = &cma_allocator;
+ else if (nommu() || is_coherent)
+ buf->allocator = &simple_allocator;
+ else if (allowblock)
+ buf->allocator = &remap_allocator;
else
- addr = __alloc_remap_buffer(dev, size, gfp, prot, &page,
- caller, want_vaddr);
+ buf->allocator = &pool_allocator;
+
+ addr = buf->allocator->alloc(&args, &page);
+
+ if (page) {
+ unsigned long flags;
- if (page)
*handle = pfn_to_dma(dev, page_to_pfn(page));
+ buf->virt = args.want_vaddr ? addr : page;
+
+ spin_lock_irqsave(&arm_dma_bufs_lock, flags);
+ list_add(&buf->list, &arm_dma_bufs);
+ spin_unlock_irqrestore(&arm_dma_bufs_lock, flags);
+ } else {
+ kfree(buf);
+ }
- return want_vaddr ? addr : page;
+ return args.want_vaddr ? addr : page;
}
/*
bool is_coherent)
{
struct page *page = pfn_to_page(dma_to_pfn(dev, handle));
- bool want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs);
-
- size = PAGE_ALIGN(size);
-
- if (nommu()) {
- __dma_free_buffer(page, size);
- } else if (!is_coherent && __free_from_pool(cpu_addr, size)) {
+ struct arm_dma_buffer *buf;
+ struct arm_dma_free_args args = {
+ .dev = dev,
+ .size = PAGE_ALIGN(size),
+ .cpu_addr = cpu_addr,
+ .page = page,
+ .want_vaddr = !dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, attrs),
+ };
+
+ buf = arm_dma_buffer_find(cpu_addr);
+ if (WARN(!buf, "Freeing invalid buffer %p\n", cpu_addr))
return;
- } else if (!dev_get_cma_area(dev)) {
- if (want_vaddr && !is_coherent)
- __dma_free_remap(cpu_addr, size);
- __dma_free_buffer(page, size);
- } else {
- /*
- * Non-atomic allocations cannot be freed with IRQs disabled
- */
- WARN_ON(irqs_disabled());
- __free_from_contiguous(dev, page, cpu_addr, size, want_vaddr);
- }
+
+ buf->allocator->free(&args);
+ kfree(buf);
}
void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
spin_unlock_irqrestore(&mapping->lock, flags);
}
+/* We'll try 2M, 1M, 64K, and finally 4K; array must end with 0! */
+static const int iommu_order_array[] = { 9, 8, 4, 0 };
+
static struct page **__iommu_alloc_buffer(struct device *dev, size_t size,
gfp_t gfp, struct dma_attrs *attrs)
{
int count = size >> PAGE_SHIFT;
int array_size = count * sizeof(struct page *);
int i = 0;
+ int order_idx = 0;
if (array_size <= PAGE_SIZE)
pages = kzalloc(array_size, GFP_KERNEL);
return pages;
}
+ /* Go straight to 4K chunks if caller says it's OK. */
+ if (dma_get_attr(DMA_ATTR_ALLOC_SINGLE_PAGES, attrs))
+ order_idx = ARRAY_SIZE(iommu_order_array) - 1;
+
/*
* IOMMU can map any pages, so himem can also be used here
*/
while (count) {
int j, order;
- for (order = __fls(count); order > 0; --order) {
- /*
- * We do not want OOM killer to be invoked as long
- * as we can fall back to single pages, so we force
- * __GFP_NORETRY for orders higher than zero.
- */
- pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
- if (pages[i])
- break;
+ order = iommu_order_array[order_idx];
+
+ /* Drop down when we get small */
+ if (__fls(count) < order) {
+ order_idx++;
+ continue;
}
- if (!pages[i]) {
- /*
- * Fall back to single page allocation.
- * Might invoke OOM killer as last resort.
- */
+ if (order) {
+ /* See if it's easy to allocate a high-order chunk */
+ pages[i] = alloc_pages(gfp | __GFP_NORETRY, order);
+
+ /* Go down a notch at first sign of pressure */
+ if (!pages[i]) {
+ order_idx++;
+ continue;
+ }
+ } else {
pages[i] = alloc_pages(gfp, 0);
if (!pages[i])
goto error;
* page tables.
*/
pgd_t *idmap_pgd;
-phys_addr_t (*arch_virt_to_idmap) (unsigned long x);
+unsigned long (*arch_virt_to_idmap)(unsigned long x);
#ifdef CONFIG_ARM_LPAE
static void idmap_add_pmd(pud_t *pud, unsigned long addr, unsigned long end,
}
}
-#ifdef CONFIG_ARM_KERNMEM_PERMS
+#ifdef CONFIG_DEBUG_RODATA
struct section_perm {
+ const char *name;
unsigned long start;
unsigned long end;
pmdval_t mask;
pmdval_t clear;
};
+/* First section-aligned location at or after __start_rodata. */
+extern char __start_rodata_section_aligned[];
+
static struct section_perm nx_perms[] = {
/* Make pages tables, etc before _stext RW (set NX). */
{
+ .name = "pre-text NX",
.start = PAGE_OFFSET,
.end = (unsigned long)_stext,
.mask = ~PMD_SECT_XN,
},
/* Make init RW (set NX). */
{
+ .name = "init NX",
.start = (unsigned long)__init_begin,
.end = (unsigned long)_sdata,
.mask = ~PMD_SECT_XN,
.prot = PMD_SECT_XN,
},
-#ifdef CONFIG_DEBUG_RODATA
/* Make rodata NX (set RO in ro_perms below). */
{
- .start = (unsigned long)__start_rodata,
+ .name = "rodata NX",
+ .start = (unsigned long)__start_rodata_section_aligned,
.end = (unsigned long)__init_begin,
.mask = ~PMD_SECT_XN,
.prot = PMD_SECT_XN,
},
-#endif
};
-#ifdef CONFIG_DEBUG_RODATA
static struct section_perm ro_perms[] = {
/* Make kernel code and rodata RX (set RO). */
{
+ .name = "text/rodata RO",
.start = (unsigned long)_stext,
.end = (unsigned long)__init_begin,
#ifdef CONFIG_ARM_LPAE
#endif
},
};
-#endif
/*
* Updates section permissions only for the current mm (sections are
for (i = 0; i < n; i++) {
if (!IS_ALIGNED(perms[i].start, SECTION_SIZE) ||
!IS_ALIGNED(perms[i].end, SECTION_SIZE)) {
- pr_err("BUG: section %lx-%lx not aligned to %lx\n",
- perms[i].start, perms[i].end,
+ pr_err("BUG: %s section %lx-%lx not aligned to %lx\n",
+ perms[i].name, perms[i].start, perms[i].end,
SECTION_SIZE);
continue;
}
stop_machine(__fix_kernmem_perms, NULL, NULL);
}
-#ifdef CONFIG_DEBUG_RODATA
int __mark_rodata_ro(void *unused)
{
update_sections_early(ro_perms, ARRAY_SIZE(ro_perms));
set_section_perms(ro_perms, ARRAY_SIZE(ro_perms), true,
current->active_mm);
}
-#endif /* CONFIG_DEBUG_RODATA */
#else
static inline void fix_kernmem_perms(void) { }
-#endif /* CONFIG_ARM_KERNMEM_PERMS */
+#endif /* CONFIG_DEBUG_RODATA */
void free_tcmmem(void)
{
#ifdef CONFIG_XIP_KERNEL
/* The XIP kernel is mapped in the module area -- skip over it */
- addr = ((unsigned long)_etext + PMD_SIZE - 1) & PMD_MASK;
+ addr = ((unsigned long)_exiprom + PMD_SIZE - 1) & PMD_MASK;
#endif
for ( ; addr < PAGE_OFFSET; addr += PMD_SIZE)
pmd_clear(pmd_off_k(addr));
#ifdef CONFIG_XIP_KERNEL
map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
map.virtual = MODULES_VADDR;
- map.length = ((unsigned long)_etext - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+ map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
map.type = MT_ROM;
create_mapping(&map);
#endif
static void __init map_lowmem(void)
{
struct memblock_region *reg;
+#ifdef CONFIG_XIP_KERNEL
+ phys_addr_t kernel_x_start = round_down(__pa(_sdata), SECTION_SIZE);
+#else
phys_addr_t kernel_x_start = round_down(__pa(_stext), SECTION_SIZE);
+#endif
phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
/* Map all the lowmem memory banks. */
.align 2
__v7_setup_stack_ptr:
- .word __v7_setup_stack - .
+ .word PHYS_RELATIVE(__v7_setup_stack, .)
ENDPROC(__v7_setup)
.bss
#include <linux/irq.h>
#include <linux/sched_clock.h>
#include <plat/time.h>
+#include <asm/delay.h>
/*
* MBus bridge block registers.
timer_base = _timer_base;
}
+static unsigned long orion_delay_timer_read(void)
+{
+ return ~readl(timer_base + TIMER0_VAL_OFF);
+}
+
+static struct delay_timer orion_delay_timer = {
+ .read_current_timer = orion_delay_timer_read,
+};
+
void __init
orion_time_init(void __iomem *_bridge_base, u32 _bridge_timer1_clr_mask,
unsigned int irq, unsigned int tclk)
ticks_per_jiffy = (tclk + HZ/2) / HZ;
+ orion_delay_timer.freq = tclk;
+ register_current_timer_delay(&orion_delay_timer);
+
/*
* Set scale and timer for sched_clock.
*/
#include <linux/smp.h>
#include <linux/delay.h>
#include <linux/psci.h>
-#include <linux/slab.h>
#include <uapi/linux/psci.h>
#include <asm/cpu_ops.h>
#include <asm/errno.h>
#include <asm/smp_plat.h>
-#include <asm/suspend.h>
-
-static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
-
-static int __maybe_unused cpu_psci_cpu_init_idle(unsigned int cpu)
-{
- int i, ret, count = 0;
- u32 *psci_states;
- struct device_node *state_node, *cpu_node;
-
- cpu_node = of_get_cpu_node(cpu, NULL);
- if (!cpu_node)
- return -ENODEV;
-
- /*
- * If the PSCI cpu_suspend function hook has not been initialized
- * idle states must not be enabled, so bail out
- */
- if (!psci_ops.cpu_suspend)
- return -EOPNOTSUPP;
-
- /* Count idle states */
- while ((state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
- count))) {
- count++;
- of_node_put(state_node);
- }
-
- if (!count)
- return -ENODEV;
-
- psci_states = kcalloc(count, sizeof(*psci_states), GFP_KERNEL);
- if (!psci_states)
- return -ENOMEM;
-
- for (i = 0; i < count; i++) {
- u32 state;
-
- state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
-
- ret = of_property_read_u32(state_node,
- "arm,psci-suspend-param",
- &state);
- if (ret) {
- pr_warn(" * %s missing arm,psci-suspend-param property\n",
- state_node->full_name);
- of_node_put(state_node);
- goto free_mem;
- }
-
- of_node_put(state_node);
- pr_debug("psci-power-state %#x index %d\n", state, i);
- if (!psci_power_state_is_valid(state)) {
- pr_warn("Invalid PSCI power state %#x\n", state);
- ret = -EINVAL;
- goto free_mem;
- }
- psci_states[i] = state;
- }
- /* Idle states parsed correctly, initialize per-cpu pointer */
- per_cpu(psci_power_state, cpu) = psci_states;
- return 0;
-
-free_mem:
- kfree(psci_states);
- return ret;
-}
static int __init cpu_psci_cpu_init(unsigned int cpu)
{
}
#endif
-static int psci_suspend_finisher(unsigned long index)
-{
- u32 *state = __this_cpu_read(psci_power_state);
-
- return psci_ops.cpu_suspend(state[index - 1],
- virt_to_phys(cpu_resume));
-}
-
-static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index)
-{
- int ret;
- u32 *state = __this_cpu_read(psci_power_state);
- /*
- * idle state index 0 corresponds to wfi, should never be called
- * from the cpu_suspend operations
- */
- if (WARN_ON_ONCE(!index))
- return -EINVAL;
-
- if (!psci_power_state_loses_context(state[index - 1]))
- ret = psci_ops.cpu_suspend(state[index - 1], 0);
- else
- ret = cpu_suspend(index, psci_suspend_finisher);
-
- return ret;
-}
-
const struct cpu_operations cpu_psci_ops = {
.name = "psci",
#ifdef CONFIG_CPU_IDLE
- .cpu_init_idle = cpu_psci_cpu_init_idle,
- .cpu_suspend = cpu_psci_cpu_suspend,
+ .cpu_init_idle = psci_cpu_init_idle,
+ .cpu_suspend = psci_cpu_suspend_enter,
#endif
.cpu_init = cpu_psci_cpu_init,
.cpu_prepare = cpu_psci_cpu_prepare,
struct device_attach_data *data = _data;
struct device *dev = data->dev;
bool async_allowed;
+ int ret;
/*
* Check if device has already been claimed. This may
if (dev->driver)
return -EBUSY;
- if (!driver_match_device(drv, dev))
+ ret = driver_match_device(drv, dev);
+ if (ret == 0) {
+ /* no match */
return 0;
+ } else if (ret == -EPROBE_DEFER) {
+ dev_dbg(dev, "Device match requests probe deferral\n");
+ driver_deferred_probe_add(dev);
+ } else if (ret < 0) {
+ dev_dbg(dev, "Bus failed to match device: %d", ret);
+ return ret;
+ } /* ret > 0 means positive match */
async_allowed = driver_allows_async_probing(drv);
static int __driver_attach(struct device *dev, void *data)
{
struct device_driver *drv = data;
+ int ret;
/*
* Lock device and try to bind to it. We drop the error
* is an error.
*/
- if (!driver_match_device(drv, dev))
+ ret = driver_match_device(drv, dev);
+ if (ret == 0) {
+ /* no match */
return 0;
+ } else if (ret == -EPROBE_DEFER) {
+ dev_dbg(dev, "Device match requests probe deferral\n");
+ driver_deferred_probe_add(dev);
+ } else if (ret < 0) {
+ dev_dbg(dev, "Bus failed to match device: %d", ret);
+ return ret;
+ } /* ret > 0 means positive match */
if (dev->parent) /* Needed for USB */
device_lock(dev->parent);
}
EXPORT_SYMBOL(clkdev_drop);
+static struct clk_lookup *__clk_register_clkdev(struct clk_hw *hw,
+ const char *con_id,
+ const char *dev_id, ...)
+{
+ struct clk_lookup *cl;
+ va_list ap;
+
+ va_start(ap, dev_id);
+ cl = vclkdev_create(hw, con_id, dev_id, ap);
+ va_end(ap);
+
+ return cl;
+}
+
/**
* clk_register_clkdev - register one clock lookup for a struct clk
* @clk: struct clk to associate with all clk_lookups
* @con_id: connection ID string on device
- * @dev_id: format string describing device name
+ * @dev_id: string describing device name
*
* con_id or dev_id may be NULL as a wildcard, just as in the rest of
* clkdev.
* after clk_register().
*/
int clk_register_clkdev(struct clk *clk, const char *con_id,
- const char *dev_fmt, ...)
+ const char *dev_id)
{
struct clk_lookup *cl;
- va_list ap;
if (IS_ERR(clk))
return PTR_ERR(clk);
- va_start(ap, dev_fmt);
- cl = vclkdev_create(__clk_get_hw(clk), con_id, dev_fmt, ap);
- va_end(ap);
+ /*
+ * Since dev_id can be NULL, and NULL is handled specially, we must
+ * pass it as either a NULL format string, or with "%s".
+ */
+ if (dev_id)
+ cl = __clk_register_clkdev(__clk_get_hw(clk), con_id, "%s",
+ dev_id);
+ else
+ cl = __clk_register_clkdev(__clk_get_hw(clk), con_id, NULL);
return cl ? 0 : -ENOMEM;
}
#define pr_fmt(fmt) "psci: " fmt
#include <linux/arm-smccc.h>
+#include <linux/cpuidle.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/of.h>
#include <linux/printk.h>
#include <linux/psci.h>
#include <linux/reboot.h>
+#include <linux/slab.h>
#include <linux/suspend.h>
#include <uapi/linux/psci.h>
+#include <asm/cpuidle.h>
#include <asm/cputype.h>
#include <asm/system_misc.h>
#include <asm/smp_plat.h>
psci_func_id, 0, 0);
}
+#ifdef CONFIG_CPU_IDLE
+static DEFINE_PER_CPU_READ_MOSTLY(u32 *, psci_power_state);
+
+static int psci_dt_cpu_init_idle(struct device_node *cpu_node, int cpu)
+{
+ int i, ret, count = 0;
+ u32 *psci_states;
+ struct device_node *state_node;
+
+ /*
+ * If the PSCI cpu_suspend function hook has not been initialized
+ * idle states must not be enabled, so bail out
+ */
+ if (!psci_ops.cpu_suspend)
+ return -EOPNOTSUPP;
+
+ /* Count idle states */
+ while ((state_node = of_parse_phandle(cpu_node, "cpu-idle-states",
+ count))) {
+ count++;
+ of_node_put(state_node);
+ }
+
+ if (!count)
+ return -ENODEV;
+
+ psci_states = kcalloc(count, sizeof(*psci_states), GFP_KERNEL);
+ if (!psci_states)
+ return -ENOMEM;
+
+ for (i = 0; i < count; i++) {
+ u32 state;
+
+ state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
+
+ ret = of_property_read_u32(state_node,
+ "arm,psci-suspend-param",
+ &state);
+ if (ret) {
+ pr_warn(" * %s missing arm,psci-suspend-param property\n",
+ state_node->full_name);
+ of_node_put(state_node);
+ goto free_mem;
+ }
+
+ of_node_put(state_node);
+ pr_debug("psci-power-state %#x index %d\n", state, i);
+ if (!psci_power_state_is_valid(state)) {
+ pr_warn("Invalid PSCI power state %#x\n", state);
+ ret = -EINVAL;
+ goto free_mem;
+ }
+ psci_states[i] = state;
+ }
+ /* Idle states parsed correctly, initialize per-cpu pointer */
+ per_cpu(psci_power_state, cpu) = psci_states;
+ return 0;
+
+free_mem:
+ kfree(psci_states);
+ return ret;
+}
+
+int psci_cpu_init_idle(unsigned int cpu)
+{
+ struct device_node *cpu_node;
+ int ret;
+
+ cpu_node = of_get_cpu_node(cpu, NULL);
+ if (!cpu_node)
+ return -ENODEV;
+
+ ret = psci_dt_cpu_init_idle(cpu_node, cpu);
+
+ of_node_put(cpu_node);
+
+ return ret;
+}
+
+static int psci_suspend_finisher(unsigned long index)
+{
+ u32 *state = __this_cpu_read(psci_power_state);
+
+ return psci_ops.cpu_suspend(state[index - 1],
+ virt_to_phys(cpu_resume));
+}
+
+int psci_cpu_suspend_enter(unsigned long index)
+{
+ int ret;
+ u32 *state = __this_cpu_read(psci_power_state);
+ /*
+ * idle state index 0 corresponds to wfi, should never be called
+ * from the cpu_suspend operations
+ */
+ if (WARN_ON_ONCE(!index))
+ return -EINVAL;
+
+ if (!psci_power_state_loses_context(state[index - 1]))
+ ret = psci_ops.cpu_suspend(state[index - 1], 0);
+ else
+ ret = cpu_suspend(index, psci_suspend_finisher);
+
+ return ret;
+}
+
+/* ARM specific CPU idle operations */
+#ifdef CONFIG_ARM
+static struct cpuidle_ops psci_cpuidle_ops __initdata = {
+ .suspend = psci_cpu_suspend_enter,
+ .init = psci_dt_cpu_init_idle,
+};
+
+CPUIDLE_METHOD_OF_DECLARE(psci, "arm,psci", &psci_cpuidle_ops);
+#endif
+#endif
+
static int psci_system_suspend(unsigned long unused)
{
return invoke_psci_fn(PSCI_FN_NATIVE(1_0, SYSTEM_SUSPEND),
struct vb2_dc_conf {
struct device *dev;
+ struct dma_attrs attrs;
};
struct vb2_dc_buf {
struct device *dev;
void *vaddr;
unsigned long size;
+ void *cookie;
dma_addr_t dma_addr;
+ struct dma_attrs attrs;
enum dma_data_direction dma_dir;
struct sg_table *dma_sgt;
struct frame_vector *vec;
sg_free_table(buf->sgt_base);
kfree(buf->sgt_base);
}
- dma_free_coherent(buf->dev, buf->size, buf->vaddr, buf->dma_addr);
+ dma_free_attrs(buf->dev, buf->size, buf->cookie, buf->dma_addr,
+ &buf->attrs);
put_device(buf->dev);
kfree(buf);
}
if (!buf)
return ERR_PTR(-ENOMEM);
- buf->vaddr = dma_alloc_coherent(dev, size, &buf->dma_addr,
- GFP_KERNEL | gfp_flags);
- if (!buf->vaddr) {
+ buf->attrs = conf->attrs;
+ buf->cookie = dma_alloc_attrs(dev, size, &buf->dma_addr,
+ GFP_KERNEL | gfp_flags, &buf->attrs);
+ if (!buf->cookie) {
dev_err(dev, "dma_alloc_coherent of size %ld failed\n", size);
kfree(buf);
return ERR_PTR(-ENOMEM);
}
+ if (!dma_get_attr(DMA_ATTR_NO_KERNEL_MAPPING, &buf->attrs))
+ buf->vaddr = buf->cookie;
+
/* Prevent the device from being released while the buffer is used */
buf->dev = get_device(dev);
buf->size = size;
*/
vma->vm_pgoff = 0;
- ret = dma_mmap_coherent(buf->dev, vma, buf->vaddr,
- buf->dma_addr, buf->size);
+ ret = dma_mmap_attrs(buf->dev, vma, buf->cookie,
+ buf->dma_addr, buf->size, &buf->attrs);
if (ret) {
pr_err("Remapping memory failed, error: %d\n", ret);
{
struct vb2_dc_buf *buf = dbuf->priv;
- return buf->vaddr + pgnum * PAGE_SIZE;
+ return buf->vaddr ? buf->vaddr + pgnum * PAGE_SIZE : NULL;
}
static void *vb2_dc_dmabuf_ops_vmap(struct dma_buf *dbuf)
return NULL;
}
- ret = dma_get_sgtable(buf->dev, sgt, buf->vaddr, buf->dma_addr,
- buf->size);
+ ret = dma_get_sgtable_attrs(buf->dev, sgt, buf->cookie, buf->dma_addr,
+ buf->size, &buf->attrs);
if (ret < 0) {
dev_err(buf->dev, "failed to get scatterlist from DMA API\n");
kfree(sgt);
};
EXPORT_SYMBOL_GPL(vb2_dma_contig_memops);
-void *vb2_dma_contig_init_ctx(struct device *dev)
+void *vb2_dma_contig_init_ctx_attrs(struct device *dev,
+ struct dma_attrs *attrs)
{
struct vb2_dc_conf *conf;
return ERR_PTR(-ENOMEM);
conf->dev = dev;
+ if (attrs)
+ conf->attrs = *attrs;
return conf;
}
-EXPORT_SYMBOL_GPL(vb2_dma_contig_init_ctx);
+EXPORT_SYMBOL_GPL(vb2_dma_contig_init_ctx_attrs);
void vb2_dma_contig_cleanup_ctx(void *alloc_ctx)
{
{
struct nd_device_driver *nd_drv = to_nd_device_driver(drv);
- return test_bit(to_nd_device_type(dev), &nd_drv->type);
+ return !!test_bit(to_nd_device_type(dev), &nd_drv->type);
}
static struct module *to_bus_provider(struct device *dev)
void clkdev_add_table(struct clk_lookup *, size_t);
int clk_add_alias(const char *, const char *, const char *, struct device *);
-int clk_register_clkdev(struct clk *, const char *, const char *, ...)
- __printf(3, 4);
+int clk_register_clkdev(struct clk *, const char *, const char *);
int clk_register_clkdevs(struct clk *, struct clk_lookup *, size_t);
#ifdef CONFIG_COMMON_CLK
* @dev_groups: Default attributes of the devices on the bus.
* @drv_groups: Default attributes of the device drivers on the bus.
* @match: Called, perhaps multiple times, whenever a new device or driver
- * is added for this bus. It should return a nonzero value if the
- * given device can be handled by the given driver.
+ * is added for this bus. It should return a positive value if the
+ * given device can be handled by the given driver and zero
+ * otherwise. It may also return error code if determining that
+ * the driver supports the device is not possible. In case of
+ * -EPROBE_DEFER it will queue the device for deferred probing.
* @uevent: Called when a device is added, removed, or a few other things
* that generate uevents to add the environment variables.
* @probe: Called when a new device or driver add to this bus, and callback
DMA_ATTR_NO_KERNEL_MAPPING,
DMA_ATTR_SKIP_CPU_SYNC,
DMA_ATTR_FORCE_CONTIGUOUS,
+ DMA_ATTR_ALLOC_SINGLE_PAGES,
DMA_ATTR_MAX,
};
bool psci_power_state_loses_context(u32 state);
bool psci_power_state_is_valid(u32 state);
+int psci_cpu_init_idle(unsigned int cpu);
+int psci_cpu_suspend_enter(unsigned long index);
+
struct psci_operations {
int (*cpu_suspend)(u32 state, unsigned long entry_point);
int (*cpu_off)(u32 state);
#include <media/videobuf2-v4l2.h>
#include <linux/dma-mapping.h>
+struct dma_attrs;
+
static inline dma_addr_t
vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no)
{
return *addr;
}
-void *vb2_dma_contig_init_ctx(struct device *dev);
+void *vb2_dma_contig_init_ctx_attrs(struct device *dev,
+ struct dma_attrs *attrs);
+
+static inline void *vb2_dma_contig_init_ctx(struct device *dev)
+{
+ return vb2_dma_contig_init_ctx_attrs(dev, NULL);
+}
+
void vb2_dma_contig_cleanup_ctx(void *alloc_ctx);
extern const struct vb2_mem_ops vb2_dma_contig_memops;
projects / linux-2.6-block.git / commitdiff