[SCSI] pm8001: add SAS/SATA HBA driver
authorjack wang <jack_wang@usish.com>
Wed, 14 Oct 2009 08:19:21 +0000 (16:19 +0800)
committerJames Bottomley <James.Bottomley@suse.de>
Fri, 4 Dec 2009 18:00:40 +0000 (12:00 -0600)
This driver supports PMC-Sierra PCIe SAS/SATA 8x6G SPC 8001 chip based
host adapters.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Signed-off-by: Lindar Liu <lindar_liu@usish.com>
Signed-off-by: Tom Peng <tom_peng@usish.com>
Signed-off-by: Kevin Ao <aoqingyun@usish.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
14 files changed:
MAINTAINERS
drivers/scsi/Kconfig
drivers/scsi/Makefile
drivers/scsi/pm8001/Makefile [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_chips.h [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_ctl.c [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_ctl.h [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_defs.h [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_hwi.c [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_hwi.h [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_init.c [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_sas.c [new file with mode: 0644]
drivers/scsi/pm8001/pm8001_sas.h [new file with mode: 0644]
include/linux/pci_ids.h

index a1a2aceca5bd5e911f78745b44201a0da0beb0f9..016411cadc9ab0dc7bc71b97134e82c53e209a83 100644 (file)
@@ -4116,6 +4116,13 @@ W:       http://www.pmc-sierra.com/
 S:     Supported
 F:     drivers/scsi/pmcraid.*
 
+PMC SIERRA PM8001 DRIVER
+M:     jack_wang@usish.com
+M:     lindar_liu@usish.com
+L:     linux-scsi@vger.kernel.org
+S:     Supported
+F:     drivers/scsi/pm8001/
+
 POSIX CLOCKS and TIMERS
 M:     Thomas Gleixner <tglx@linutronix.de>
 S:     Supported
index e11cca4c784cbfd5b359a40db6938e69458dfab1..2e4f7d0ee639eb789febf3aec1351a853f45cfe1 100644 (file)
@@ -1818,6 +1818,14 @@ config SCSI_PMCRAID
        ---help---
          This driver supports the PMC SIERRA MaxRAID adapters.
 
+config SCSI_PM8001
+       tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
+       depends on PCI && SCSI
+       select SCSI_SAS_LIBSAS
+       help
+         This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
+         based host adapters.
+
 config SCSI_SRP
        tristate "SCSI RDMA Protocol helper library"
        depends on SCSI && PCI
index 3ad61db5e3fa52cf1003ab1217f6c66e383da4dc..53b1dac7e7d9bd7f5b47aabd3d093711ead93052 100644 (file)
@@ -70,6 +70,7 @@ obj-$(CONFIG_SCSI_AIC79XX)    += aic7xxx/
 obj-$(CONFIG_SCSI_AACRAID)     += aacraid/
 obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
 obj-$(CONFIG_SCSI_AIC94XX)     += aic94xx/
+obj-$(CONFIG_SCSI_PM8001)      += pm8001/
 obj-$(CONFIG_SCSI_IPS)         += ips.o
 obj-$(CONFIG_SCSI_FD_MCS)      += fd_mcs.o
 obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
diff --git a/drivers/scsi/pm8001/Makefile b/drivers/scsi/pm8001/Makefile
new file mode 100644 (file)
index 0000000..52f0429
--- /dev/null
@@ -0,0 +1,12 @@
+#
+# Kernel configuration file for the PM8001 SAS/SATA 8x6G based HBA driver
+#
+# Copyright (C) 2008-2009  USI Co., Ltd.
+
+
+obj-$(CONFIG_SCSI_PM8001) += pm8001.o
+pm8001-y += pm8001_init.o \
+               pm8001_sas.o  \
+               pm8001_ctl.o  \
+               pm8001_hwi.o
+
diff --git a/drivers/scsi/pm8001/pm8001_chips.h b/drivers/scsi/pm8001/pm8001_chips.h
new file mode 100644 (file)
index 0000000..4efa4d0
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_CHIPS_H_
+#define _PM8001_CHIPS_H_
+
+static inline u32 pm8001_read_32(void *virt_addr)
+{
+       return *((u32 *)virt_addr);
+}
+
+static inline void pm8001_write_32(void *addr, u32 offset, u32 val)
+{
+       *((u32 *)(addr + offset)) = val;
+}
+
+static inline u32 pm8001_cr32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+               u32 offset)
+{
+       return readl(pm8001_ha->io_mem[bar].memvirtaddr + offset);
+}
+
+static inline void pm8001_cw32(struct pm8001_hba_info *pm8001_ha, u32 bar,
+               u32 addr, u32 val)
+{
+       writel(val, pm8001_ha->io_mem[bar].memvirtaddr + addr);
+}
+static inline u32 pm8001_mr32(void __iomem *addr, u32 offset)
+{
+       return readl(addr + offset);
+}
+static inline void pm8001_mw32(void __iomem *addr, u32 offset, u32 val)
+{
+       writel(val, addr + offset);
+}
+static inline u32 get_pci_bar_index(u32 pcibar)
+{
+               switch (pcibar) {
+               case 0x18:
+               case 0x1C:
+                       return 1;
+               case 0x20:
+                       return 2;
+               case 0x24:
+                       return 3;
+               default:
+                       return 0;
+       }
+}
+
+#endif  /* _PM8001_CHIPS_H_ */
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.c b/drivers/scsi/pm8001/pm8001_ctl.c
new file mode 100644 (file)
index 0000000..14b13ac
--- /dev/null
@@ -0,0 +1,573 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#include <linux/firmware.h>
+#include "pm8001_sas.h"
+#include "pm8001_ctl.h"
+
+/* scsi host attributes */
+
+/**
+ * pm8001_ctl_mpi_interface_rev_show - MPI interface revision number
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_mpi_interface_rev_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%d\n",
+               pm8001_ha->main_cfg_tbl.interface_rev);
+}
+static
+DEVICE_ATTR(interface_rev, S_IRUGO, pm8001_ctl_mpi_interface_rev_show, NULL);
+
+/**
+ * pm8001_ctl_fw_version_show - firmware version
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_fw_version_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x.%02x\n",
+                      (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 24),
+                      (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 16),
+                      (u8)(pm8001_ha->main_cfg_tbl.firmware_rev >> 8),
+                      (u8)(pm8001_ha->main_cfg_tbl.firmware_rev));
+}
+static DEVICE_ATTR(fw_version, S_IRUGO, pm8001_ctl_fw_version_show, NULL);
+/**
+ * pm8001_ctl_max_out_io_show - max outstanding io supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_out_io_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%d\n",
+                       pm8001_ha->main_cfg_tbl.max_out_io);
+}
+static DEVICE_ATTR(max_out_io, S_IRUGO, pm8001_ctl_max_out_io_show, NULL);
+/**
+ * pm8001_ctl_max_devices_show - max devices support
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_devices_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%04d\n",
+                       (u16)(pm8001_ha->main_cfg_tbl.max_sgl >> 16));
+}
+static DEVICE_ATTR(max_devices, S_IRUGO, pm8001_ctl_max_devices_show, NULL);
+/**
+ * pm8001_ctl_max_sg_list_show - max sg list supported iff not 0.0 for no
+ * hardware limitation
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_max_sg_list_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%04d\n",
+                       pm8001_ha->main_cfg_tbl.max_sgl & 0x0000FFFF);
+}
+static DEVICE_ATTR(max_sg_list, S_IRUGO, pm8001_ctl_max_sg_list_show, NULL);
+
+#define SAS_1_0 0x1
+#define SAS_1_1 0x2
+#define SAS_2_0 0x4
+
+static ssize_t
+show_sas_spec_support_status(unsigned int mode, char *buf)
+{
+       ssize_t len = 0;
+
+       if (mode & SAS_1_1)
+               len = sprintf(buf, "%s", "SAS1.1");
+       if (mode & SAS_2_0)
+               len += sprintf(buf + len, "%s%s", len ? ", " : "", "SAS2.0");
+       len += sprintf(buf + len, "\n");
+
+       return len;
+}
+
+/**
+ * pm8001_ctl_sas_spec_support_show - sas spec supported
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_sas_spec_support_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       unsigned int mode;
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       mode = (pm8001_ha->main_cfg_tbl.ctrl_cap_flag & 0xfe000000)>>25;
+       return show_sas_spec_support_status(mode, buf);
+}
+static DEVICE_ATTR(sas_spec_support, S_IRUGO,
+                  pm8001_ctl_sas_spec_support_show, NULL);
+
+/**
+ * pm8001_ctl_sas_address_show - sas address
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * This is the controller sas address
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_host_sas_address_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       return snprintf(buf, PAGE_SIZE, "0x%016llx\n",
+                       be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr));
+}
+static DEVICE_ATTR(host_sas_address, S_IRUGO,
+                  pm8001_ctl_host_sas_address_show, NULL);
+
+/**
+ * pm8001_ctl_logging_level_show - logging level
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read/write' shost attribute.
+ */
+static ssize_t pm8001_ctl_logging_level_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       return snprintf(buf, PAGE_SIZE, "%08xh\n", pm8001_ha->logging_level);
+}
+static ssize_t pm8001_ctl_logging_level_store(struct device *cdev,
+       struct device_attribute *attr, const char *buf, size_t count)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       int val = 0;
+
+       if (sscanf(buf, "%x", &val) != 1)
+               return -EINVAL;
+
+       pm8001_ha->logging_level = val;
+       return strlen(buf);
+}
+
+static DEVICE_ATTR(logging_level, S_IRUGO | S_IWUSR,
+       pm8001_ctl_logging_level_show, pm8001_ctl_logging_level_store);
+/**
+ * pm8001_ctl_aap_log_show - aap1 event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_aap_log_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       int i;
+#define AAP1_MEMMAP(r, c) \
+       (*(u32 *)((u8*)pm8001_ha->memoryMap.region[AAP1].virt_ptr + (r) * 32 \
+       + (c)))
+
+       char *str = buf;
+       int max = 2;
+       for (i = 0; i < max; i++) {
+               str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+                              "0x%08x 0x%08x\n",
+                              AAP1_MEMMAP(i, 0),
+                              AAP1_MEMMAP(i, 4),
+                              AAP1_MEMMAP(i, 8),
+                              AAP1_MEMMAP(i, 12),
+                              AAP1_MEMMAP(i, 16),
+                              AAP1_MEMMAP(i, 20),
+                              AAP1_MEMMAP(i, 24),
+                              AAP1_MEMMAP(i, 28));
+       }
+
+       return str - buf;
+}
+static DEVICE_ATTR(aap_log, S_IRUGO, pm8001_ctl_aap_log_show, NULL);
+/**
+ * pm8001_ctl_aap_log_show - IOP event log
+ * @cdev: pointer to embedded class device
+ * @buf: the buffer returned
+ *
+ * A sysfs 'read-only' shost attribute.
+ */
+static ssize_t pm8001_ctl_iop_log_show(struct device *cdev,
+       struct device_attribute *attr, char *buf)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+#define IOP_MEMMAP(r, c) \
+       (*(u32 *)((u8*)pm8001_ha->memoryMap.region[IOP].virt_ptr + (r) * 32 \
+       + (c)))
+       int i;
+       char *str = buf;
+       int max = 2;
+       for (i = 0; i < max; i++) {
+               str += sprintf(str, "0x%08x 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x"
+                              "0x%08x 0x%08x\n",
+                              IOP_MEMMAP(i, 0),
+                              IOP_MEMMAP(i, 4),
+                              IOP_MEMMAP(i, 8),
+                              IOP_MEMMAP(i, 12),
+                              IOP_MEMMAP(i, 16),
+                              IOP_MEMMAP(i, 20),
+                              IOP_MEMMAP(i, 24),
+                              IOP_MEMMAP(i, 28));
+       }
+
+       return str - buf;
+}
+static DEVICE_ATTR(iop_log, S_IRUGO, pm8001_ctl_iop_log_show, NULL);
+
+#define FLASH_CMD_NONE      0x00
+#define FLASH_CMD_UPDATE    0x01
+#define FLASH_CMD_SET_NVMD    0x02
+
+struct flash_command {
+     u8      command[8];
+     int     code;
+};
+
+static struct flash_command flash_command_table[] =
+{
+     {"set_nvmd",    FLASH_CMD_SET_NVMD},
+     {"update",      FLASH_CMD_UPDATE},
+     {"",            FLASH_CMD_NONE} /* Last entry should be NULL. */
+};
+
+struct error_fw {
+     char    *reason;
+     int     err_code;
+};
+
+static struct error_fw flash_error_table[] =
+{
+     {"Failed to open fw image file",  FAIL_OPEN_BIOS_FILE},
+     {"image header mismatch",         FLASH_UPDATE_HDR_ERR},
+     {"image offset mismatch",         FLASH_UPDATE_OFFSET_ERR},
+     {"image CRC Error",               FLASH_UPDATE_CRC_ERR},
+     {"image length Error.",           FLASH_UPDATE_LENGTH_ERR},
+     {"Failed to program flash chip",  FLASH_UPDATE_HW_ERR},
+     {"Flash chip not supported.",     FLASH_UPDATE_DNLD_NOT_SUPPORTED},
+     {"Flash update disabled.",                FLASH_UPDATE_DISABLED},
+     {"Flash in progress",             FLASH_IN_PROGRESS},
+     {"Image file size Error",         FAIL_FILE_SIZE},
+     {"Input parameter error",         FAIL_PARAMETERS},
+     {"Out of memory",                 FAIL_OUT_MEMORY},
+     {"OK", 0} /* Last entry err_code = 0. */
+};
+
+static int pm8001_set_nvmd(struct pm8001_hba_info *pm8001_ha)
+{
+       struct pm8001_ioctl_payload     *payload;
+       DECLARE_COMPLETION_ONSTACK(completion);
+       u8              *ioctlbuffer = NULL;
+       u32             length = 0;
+       u32             ret = 0;
+
+       length = 1024 * 5 + sizeof(*payload) - 1;
+       ioctlbuffer = kzalloc(length, GFP_KERNEL);
+       if (!ioctlbuffer)
+               return -ENOMEM;
+       if ((pm8001_ha->fw_image->size <= 0) ||
+           (pm8001_ha->fw_image->size > 4096)) {
+               ret = FAIL_FILE_SIZE;
+               goto out;
+       }
+       payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+       memcpy((u8 *)payload->func_specific, (u8 *)pm8001_ha->fw_image->data,
+                               pm8001_ha->fw_image->size);
+       payload->length = pm8001_ha->fw_image->size;
+       payload->id = 0;
+       pm8001_ha->nvmd_completion = &completion;
+       ret = PM8001_CHIP_DISP->set_nvmd_req(pm8001_ha, payload);
+       wait_for_completion(&completion);
+out:
+       kfree(ioctlbuffer);
+       return ret;
+}
+
+static int pm8001_update_flash(struct pm8001_hba_info *pm8001_ha)
+{
+       struct pm8001_ioctl_payload     *payload;
+       DECLARE_COMPLETION_ONSTACK(completion);
+       u8              *ioctlbuffer = NULL;
+       u32             length = 0;
+       struct fw_control_info  *fwControl;
+       u32             loopNumber, loopcount = 0;
+       u32             sizeRead = 0;
+       u32             partitionSize, partitionSizeTmp;
+       u32             ret = 0;
+       u32             partitionNumber = 0;
+       struct pm8001_fw_image_header *image_hdr;
+
+       length = 1024 * 16 + sizeof(*payload) - 1;
+       ioctlbuffer = kzalloc(length, GFP_KERNEL);
+       image_hdr = (struct pm8001_fw_image_header *)pm8001_ha->fw_image->data;
+       if (!ioctlbuffer)
+               return -ENOMEM;
+       if (pm8001_ha->fw_image->size < 28) {
+               ret = FAIL_FILE_SIZE;
+               goto out;
+       }
+
+       while (sizeRead < pm8001_ha->fw_image->size) {
+               partitionSizeTmp =
+                       *(u32 *)((u8 *)&image_hdr->image_length + sizeRead);
+               partitionSize = be32_to_cpu(partitionSizeTmp);
+               loopcount = (partitionSize + HEADER_LEN)/IOCTL_BUF_SIZE;
+               if (loopcount % IOCTL_BUF_SIZE)
+                       loopcount++;
+               if (loopcount == 0)
+                       loopcount++;
+               for (loopNumber = 0; loopNumber < loopcount; loopNumber++) {
+                       payload = (struct pm8001_ioctl_payload *)ioctlbuffer;
+                       payload->length = 1024*16;
+                       payload->id = 0;
+                       fwControl =
+                             (struct fw_control_info *)payload->func_specific;
+                       fwControl->len = IOCTL_BUF_SIZE;   /* IN */
+                       fwControl->size = partitionSize + HEADER_LEN;/* IN */
+                       fwControl->retcode = 0;/* OUT */
+                       fwControl->offset = loopNumber * IOCTL_BUF_SIZE;/*OUT */
+
+               /* for the last chunk of data in case file size is not even with
+               4k, load only the rest*/
+               if (((loopcount-loopNumber) == 1) &&
+                       ((partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE)) {
+                       fwControl->len =
+                               (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+                       memcpy((u8 *)fwControl->buffer,
+                               (u8 *)pm8001_ha->fw_image->data + sizeRead,
+                               (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE);
+                       sizeRead +=
+                               (partitionSize + HEADER_LEN) % IOCTL_BUF_SIZE;
+               } else {
+                       memcpy((u8 *)fwControl->buffer,
+                               (u8 *)pm8001_ha->fw_image->data + sizeRead,
+                               IOCTL_BUF_SIZE);
+                       sizeRead += IOCTL_BUF_SIZE;
+               }
+
+               pm8001_ha->nvmd_completion = &completion;
+               ret = PM8001_CHIP_DISP->fw_flash_update_req(pm8001_ha, payload);
+               wait_for_completion(&completion);
+               if (ret || (fwControl->retcode > FLASH_UPDATE_IN_PROGRESS)) {
+                       ret = fwControl->retcode;
+                       kfree(ioctlbuffer);
+                       ioctlbuffer = NULL;
+                       break;
+               }
+       }
+       if (ret)
+               break;
+       partitionNumber++;
+}
+out:
+       kfree(ioctlbuffer);
+       return ret;
+}
+static ssize_t pm8001_store_update_fw(struct device *cdev,
+                                     struct device_attribute *attr,
+                                     const char *buf, size_t count)
+{
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       char *cmd_ptr, *filename_ptr;
+       int res, i;
+       int flash_command = FLASH_CMD_NONE;
+       int err = 0;
+       if (!capable(CAP_SYS_ADMIN))
+               return -EACCES;
+
+       cmd_ptr = kzalloc(count*2, GFP_KERNEL);
+
+       if (!cmd_ptr) {
+               err = FAIL_OUT_MEMORY;
+               goto out;
+       }
+
+       filename_ptr = cmd_ptr + count;
+       res = sscanf(buf, "%s %s", cmd_ptr, filename_ptr);
+       if (res != 2) {
+               err = FAIL_PARAMETERS;
+               goto out1;
+       }
+
+       for (i = 0; flash_command_table[i].code != FLASH_CMD_NONE; i++) {
+               if (!memcmp(flash_command_table[i].command,
+                                cmd_ptr, strlen(cmd_ptr))) {
+                       flash_command = flash_command_table[i].code;
+                       break;
+               }
+       }
+       if (flash_command == FLASH_CMD_NONE) {
+               err = FAIL_PARAMETERS;
+               goto out1;
+       }
+
+       if (pm8001_ha->fw_status == FLASH_IN_PROGRESS) {
+               err = FLASH_IN_PROGRESS;
+               goto out1;
+       }
+       err = request_firmware(&pm8001_ha->fw_image,
+                              filename_ptr,
+                              pm8001_ha->dev);
+
+       if (err) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Failed to load firmware image file %s,"
+                       " error %d\n", filename_ptr, err));
+               err = FAIL_OPEN_BIOS_FILE;
+               goto out1;
+       }
+
+       switch (flash_command) {
+       case FLASH_CMD_UPDATE:
+               pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+               err = pm8001_update_flash(pm8001_ha);
+               break;
+       case FLASH_CMD_SET_NVMD:
+               pm8001_ha->fw_status = FLASH_IN_PROGRESS;
+               err = pm8001_set_nvmd(pm8001_ha);
+               break;
+       default:
+               pm8001_ha->fw_status = FAIL_PARAMETERS;
+               err = FAIL_PARAMETERS;
+               break;
+       }
+       release_firmware(pm8001_ha->fw_image);
+out1:
+       kfree(cmd_ptr);
+out:
+       pm8001_ha->fw_status = err;
+
+       if (!err)
+               return count;
+       else
+               return -err;
+}
+
+static ssize_t pm8001_show_update_fw(struct device *cdev,
+                                    struct device_attribute *attr, char *buf)
+{
+       int i;
+       struct Scsi_Host *shost = class_to_shost(cdev);
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+
+       for (i = 0; flash_error_table[i].err_code != 0; i++) {
+               if (flash_error_table[i].err_code == pm8001_ha->fw_status)
+                       break;
+       }
+       if (pm8001_ha->fw_status != FLASH_IN_PROGRESS)
+               pm8001_ha->fw_status = FLASH_OK;
+
+       return snprintf(buf, PAGE_SIZE, "status=%x %s\n",
+                       flash_error_table[i].err_code,
+                       flash_error_table[i].reason);
+}
+
+static DEVICE_ATTR(update_fw, S_IRUGO|S_IWUGO,
+       pm8001_show_update_fw, pm8001_store_update_fw);
+struct device_attribute *pm8001_host_attrs[] = {
+       &dev_attr_interface_rev,
+       &dev_attr_fw_version,
+       &dev_attr_update_fw,
+       &dev_attr_aap_log,
+       &dev_attr_iop_log,
+       &dev_attr_max_out_io,
+       &dev_attr_max_devices,
+       &dev_attr_max_sg_list,
+       &dev_attr_sas_spec_support,
+       &dev_attr_logging_level,
+       &dev_attr_host_sas_address,
+       NULL,
+};
+
diff --git a/drivers/scsi/pm8001/pm8001_ctl.h b/drivers/scsi/pm8001/pm8001_ctl.h
new file mode 100644 (file)
index 0000000..22644de
--- /dev/null
@@ -0,0 +1,67 @@
+ /*
+  * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+  *
+  * Copyright (c) 2008-2009 USI Co., Ltd.
+  * All rights reserved.
+  *
+  * Redistribution and use in source and binary forms, with or without
+  * modification, are permitted provided that the following conditions
+  * are met:
+  * 1. Redistributions of source code must retain the above copyright
+  *    notice, this list of conditions, and the following disclaimer,
+  *    without modification.
+  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+  *    substantially similar to the "NO WARRANTY" disclaimer below
+  *    ("Disclaimer") and any redistribution must be conditioned upon
+  *    including a substantially similar Disclaimer requirement for further
+  *    binary redistribution.
+  * 3. Neither the names of the above-listed copyright holders nor the names
+  *    of any contributors may be used to endorse or promote products derived
+  *    from this software without specific prior written permission.
+  *
+  * Alternatively, this software may be distributed under the terms of the
+  * GNU General Public License ("GPL") version 2 as published by the Free
+  * Software Foundation.
+  *
+  * NO WARRANTY
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  * POSSIBILITY OF SUCH DAMAGES.
+  *
+  */
+
+#ifndef PM8001_CTL_H_INCLUDED
+#define PM8001_CTL_H_INCLUDED
+
+#define IOCTL_BUF_SIZE         4096
+#define HEADER_LEN                     28
+#define SIZE_OFFSET                    16
+
+struct pm8001_ioctl_payload {
+       u32     signature;
+       u16     major_function;
+       u16     minor_function;
+       u16     length;
+       u16     status;
+       u16     offset;
+       u16     id;
+       u8      func_specific[1];
+};
+
+#define FLASH_OK                        0x000000
+#define FAIL_OPEN_BIOS_FILE             0x000100
+#define FAIL_FILE_SIZE                  0x000a00
+#define FAIL_PARAMETERS                 0x000b00
+#define FAIL_OUT_MEMORY                 0x000c00
+#define FLASH_IN_PROGRESS               0x001000
+
+#endif /* PM8001_CTL_H_INCLUDED */
+
diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
new file mode 100644 (file)
index 0000000..944afad
--- /dev/null
@@ -0,0 +1,112 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_DEFS_H_
+#define _PM8001_DEFS_H_
+
+enum chip_flavors {
+       chip_8001,
+};
+#define USI_MAX_MEMCNT                 9
+#define PM8001_MAX_DMA_SG              SG_ALL
+enum phy_speed {
+       PHY_SPEED_15 = 0x01,
+       PHY_SPEED_30 = 0x02,
+       PHY_SPEED_60 = 0x04,
+};
+
+enum data_direction {
+       DATA_DIR_NONE = 0x0,    /* NO TRANSFER */
+       DATA_DIR_IN = 0x01,     /* INBOUND */
+       DATA_DIR_OUT = 0x02,    /* OUTBOUND */
+       DATA_DIR_BYRECIPIENT = 0x04, /* UNSPECIFIED */
+};
+
+enum port_type {
+       PORT_TYPE_SAS = (1L << 1),
+       PORT_TYPE_SATA = (1L << 0),
+};
+
+/* driver compile-time configuration */
+#define        PM8001_MAX_CCB           512    /* max ccbs supported */
+#define        PM8001_MAX_INB_NUM       1
+#define        PM8001_MAX_OUTB_NUM      1
+#define        PM8001_CAN_QUEUE         128    /* SCSI Queue depth */
+
+/* unchangeable hardware details */
+#define        PM8001_MAX_PHYS          8      /* max. possible phys */
+#define        PM8001_MAX_PORTS         8      /* max. possible ports */
+#define        PM8001_MAX_DEVICES       1024   /* max supported device */
+
+enum memory_region_num {
+       AAP1 = 0x0, /* application acceleration processor */
+       IOP,        /* IO processor */
+       CI,         /* consumer index */
+       PI,         /* producer index */
+       IB,         /* inbound queue */
+       OB,         /* outbound queue */
+       NVMD,       /* NVM device */
+       DEV_MEM,    /* memory for devices */
+       CCB_MEM,    /* memory for command control block */
+};
+#define        PM8001_EVENT_LOG_SIZE    (128 * 1024)
+
+/*error code*/
+enum mpi_err {
+       MPI_IO_STATUS_SUCCESS = 0x0,
+       MPI_IO_STATUS_BUSY = 0x01,
+       MPI_IO_STATUS_FAIL = 0x02,
+};
+
+/**
+ * Phy Control constants
+ */
+enum phy_control_type {
+       PHY_LINK_RESET = 0x01,
+       PHY_HARD_RESET = 0x02,
+       PHY_NOTIFY_ENABLE_SPINUP = 0x10,
+};
+
+enum pm8001_hba_info_flags {
+       PM8001F_INIT_TIME       = (1U << 0),
+       PM8001F_RUN_TIME        = (1U << 1),
+};
+
+#endif
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
new file mode 100644 (file)
index 0000000..aa5756f
--- /dev/null
@@ -0,0 +1,4371 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+ #include "pm8001_sas.h"
+ #include "pm8001_hwi.h"
+ #include "pm8001_chips.h"
+ #include "pm8001_ctl.h"
+
+/**
+ * read_main_config_table - read the configure table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit read_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+       void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+       pm8001_ha->main_cfg_tbl.signature       = pm8001_mr32(address, 0x00);
+       pm8001_ha->main_cfg_tbl.interface_rev   = pm8001_mr32(address, 0x04);
+       pm8001_ha->main_cfg_tbl.firmware_rev    = pm8001_mr32(address, 0x08);
+       pm8001_ha->main_cfg_tbl.max_out_io      = pm8001_mr32(address, 0x0C);
+       pm8001_ha->main_cfg_tbl.max_sgl         = pm8001_mr32(address, 0x10);
+       pm8001_ha->main_cfg_tbl.ctrl_cap_flag   = pm8001_mr32(address, 0x14);
+       pm8001_ha->main_cfg_tbl.gst_offset      = pm8001_mr32(address, 0x18);
+       pm8001_ha->main_cfg_tbl.inbound_queue_offset =
+               pm8001_mr32(address, 0x1C);
+       pm8001_ha->main_cfg_tbl.outbound_queue_offset =
+               pm8001_mr32(address, 0x20);
+       pm8001_ha->main_cfg_tbl.hda_mode_flag   =
+               pm8001_mr32(address, MAIN_HDA_FLAGS_OFFSET);
+
+       /* read analog Setting offset from the configuration table */
+       pm8001_ha->main_cfg_tbl.anolog_setup_table_offset =
+               pm8001_mr32(address, MAIN_ANALOG_SETUP_OFFSET);
+
+       /* read Error Dump Offset and Length */
+       pm8001_ha->main_cfg_tbl.fatal_err_dump_offset0 =
+               pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_OFFSET);
+       pm8001_ha->main_cfg_tbl.fatal_err_dump_length0 =
+               pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP0_LENGTH);
+       pm8001_ha->main_cfg_tbl.fatal_err_dump_offset1 =
+               pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_OFFSET);
+       pm8001_ha->main_cfg_tbl.fatal_err_dump_length1 =
+               pm8001_mr32(address, MAIN_FATAL_ERROR_RDUMP1_LENGTH);
+}
+
+/**
+ * read_general_status_table - read the general status table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_general_status_table(struct pm8001_hba_info *pm8001_ha)
+{
+       void __iomem *address = pm8001_ha->general_stat_tbl_addr;
+       pm8001_ha->gs_tbl.gst_len_mpistate      = pm8001_mr32(address, 0x00);
+       pm8001_ha->gs_tbl.iq_freeze_state0      = pm8001_mr32(address, 0x04);
+       pm8001_ha->gs_tbl.iq_freeze_state1      = pm8001_mr32(address, 0x08);
+       pm8001_ha->gs_tbl.msgu_tcnt             = pm8001_mr32(address, 0x0C);
+       pm8001_ha->gs_tbl.iop_tcnt              = pm8001_mr32(address, 0x10);
+       pm8001_ha->gs_tbl.reserved              = pm8001_mr32(address, 0x14);
+       pm8001_ha->gs_tbl.phy_state[0]  = pm8001_mr32(address, 0x18);
+       pm8001_ha->gs_tbl.phy_state[1]  = pm8001_mr32(address, 0x1C);
+       pm8001_ha->gs_tbl.phy_state[2]  = pm8001_mr32(address, 0x20);
+       pm8001_ha->gs_tbl.phy_state[3]  = pm8001_mr32(address, 0x24);
+       pm8001_ha->gs_tbl.phy_state[4]  = pm8001_mr32(address, 0x28);
+       pm8001_ha->gs_tbl.phy_state[5]  = pm8001_mr32(address, 0x2C);
+       pm8001_ha->gs_tbl.phy_state[6]  = pm8001_mr32(address, 0x30);
+       pm8001_ha->gs_tbl.phy_state[7]  = pm8001_mr32(address, 0x34);
+       pm8001_ha->gs_tbl.reserved1             = pm8001_mr32(address, 0x38);
+       pm8001_ha->gs_tbl.reserved2             = pm8001_mr32(address, 0x3C);
+       pm8001_ha->gs_tbl.reserved3             = pm8001_mr32(address, 0x40);
+       pm8001_ha->gs_tbl.recover_err_info[0]   = pm8001_mr32(address, 0x44);
+       pm8001_ha->gs_tbl.recover_err_info[1]   = pm8001_mr32(address, 0x48);
+       pm8001_ha->gs_tbl.recover_err_info[2]   = pm8001_mr32(address, 0x4C);
+       pm8001_ha->gs_tbl.recover_err_info[3]   = pm8001_mr32(address, 0x50);
+       pm8001_ha->gs_tbl.recover_err_info[4]   = pm8001_mr32(address, 0x54);
+       pm8001_ha->gs_tbl.recover_err_info[5]   = pm8001_mr32(address, 0x58);
+       pm8001_ha->gs_tbl.recover_err_info[6]   = pm8001_mr32(address, 0x5C);
+       pm8001_ha->gs_tbl.recover_err_info[7]   = pm8001_mr32(address, 0x60);
+}
+
+/**
+ * read_inbnd_queue_table - read the inbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+       int inbQ_num = 1;
+       int i;
+       void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+       for (i = 0; i < inbQ_num; i++) {
+               u32 offset = i * 0x24;
+               pm8001_ha->inbnd_q_tbl[i].pi_pci_bar =
+                     get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+               pm8001_ha->inbnd_q_tbl[i].pi_offset =
+                       pm8001_mr32(address, (offset + 0x18));
+       }
+}
+
+/**
+ * read_outbnd_queue_table - read the outbound queue table and save it.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+read_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha)
+{
+       int outbQ_num = 1;
+       int i;
+       void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+       for (i = 0; i < outbQ_num; i++) {
+               u32 offset = i * 0x24;
+               pm8001_ha->outbnd_q_tbl[i].ci_pci_bar =
+                     get_pci_bar_index(pm8001_mr32(address, (offset + 0x14)));
+               pm8001_ha->outbnd_q_tbl[i].ci_offset =
+                       pm8001_mr32(address, (offset + 0x18));
+       }
+}
+
+/**
+ * init_default_table_values - init the default table.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+init_default_table_values(struct pm8001_hba_info *pm8001_ha)
+{
+       int qn = 1;
+       int i;
+       u32 offsetib, offsetob;
+       void __iomem *addressib = pm8001_ha->inbnd_q_tbl_addr;
+       void __iomem *addressob = pm8001_ha->outbnd_q_tbl_addr;
+
+       pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd                     = 0;
+       pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3                = 0;
+       pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7                = 0;
+       pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3               = 0;
+       pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7               = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3       = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7       = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3   = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7   = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3   = 0;
+       pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7   = 0;
+
+       pm8001_ha->main_cfg_tbl.upper_event_log_addr            =
+               pm8001_ha->memoryMap.region[AAP1].phys_addr_hi;
+       pm8001_ha->main_cfg_tbl.lower_event_log_addr            =
+               pm8001_ha->memoryMap.region[AAP1].phys_addr_lo;
+       pm8001_ha->main_cfg_tbl.event_log_size  = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->main_cfg_tbl.event_log_option                = 0x01;
+       pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr        =
+               pm8001_ha->memoryMap.region[IOP].phys_addr_hi;
+       pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr        =
+               pm8001_ha->memoryMap.region[IOP].phys_addr_lo;
+       pm8001_ha->main_cfg_tbl.iop_event_log_size      = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->main_cfg_tbl.iop_event_log_option            = 0x01;
+       pm8001_ha->main_cfg_tbl.fatal_err_interrupt             = 0x01;
+       for (i = 0; i < qn; i++) {
+               pm8001_ha->inbnd_q_tbl[i].element_pri_size_cnt  =
+                       0x00000100 | (0x00000040 << 16) | (0x00<<30);
+               pm8001_ha->inbnd_q_tbl[i].upper_base_addr       =
+                       pm8001_ha->memoryMap.region[IB].phys_addr_hi;
+               pm8001_ha->inbnd_q_tbl[i].lower_base_addr       =
+               pm8001_ha->memoryMap.region[IB].phys_addr_lo;
+               pm8001_ha->inbnd_q_tbl[i].base_virt             =
+                       (u8 *)pm8001_ha->memoryMap.region[IB].virt_ptr;
+               pm8001_ha->inbnd_q_tbl[i].total_length          =
+                       pm8001_ha->memoryMap.region[IB].total_len;
+               pm8001_ha->inbnd_q_tbl[i].ci_upper_base_addr    =
+                       pm8001_ha->memoryMap.region[CI].phys_addr_hi;
+               pm8001_ha->inbnd_q_tbl[i].ci_lower_base_addr    =
+                       pm8001_ha->memoryMap.region[CI].phys_addr_lo;
+               pm8001_ha->inbnd_q_tbl[i].ci_virt               =
+                       pm8001_ha->memoryMap.region[CI].virt_ptr;
+               offsetib = i * 0x20;
+               pm8001_ha->inbnd_q_tbl[i].pi_pci_bar            =
+                       get_pci_bar_index(pm8001_mr32(addressib,
+                               (offsetib + 0x14)));
+               pm8001_ha->inbnd_q_tbl[i].pi_offset             =
+                       pm8001_mr32(addressib, (offsetib + 0x18));
+               pm8001_ha->inbnd_q_tbl[i].producer_idx          = 0;
+               pm8001_ha->inbnd_q_tbl[i].consumer_index        = 0;
+       }
+       for (i = 0; i < qn; i++) {
+               pm8001_ha->outbnd_q_tbl[i].element_size_cnt     =
+                       256 | (64 << 16) | (1<<30);
+               pm8001_ha->outbnd_q_tbl[i].upper_base_addr      =
+                       pm8001_ha->memoryMap.region[OB].phys_addr_hi;
+               pm8001_ha->outbnd_q_tbl[i].lower_base_addr      =
+                       pm8001_ha->memoryMap.region[OB].phys_addr_lo;
+               pm8001_ha->outbnd_q_tbl[i].base_virt            =
+                       (u8 *)pm8001_ha->memoryMap.region[OB].virt_ptr;
+               pm8001_ha->outbnd_q_tbl[i].total_length         =
+                       pm8001_ha->memoryMap.region[OB].total_len;
+               pm8001_ha->outbnd_q_tbl[i].pi_upper_base_addr   =
+                       pm8001_ha->memoryMap.region[PI].phys_addr_hi;
+               pm8001_ha->outbnd_q_tbl[i].pi_lower_base_addr   =
+                       pm8001_ha->memoryMap.region[PI].phys_addr_lo;
+               pm8001_ha->outbnd_q_tbl[i].interrup_vec_cnt_delay       =
+                       0 | (0 << 16) | (0 << 24);
+               pm8001_ha->outbnd_q_tbl[i].pi_virt              =
+                       pm8001_ha->memoryMap.region[PI].virt_ptr;
+               offsetob = i * 0x24;
+               pm8001_ha->outbnd_q_tbl[i].ci_pci_bar           =
+                       get_pci_bar_index(pm8001_mr32(addressob,
+                       offsetob + 0x14));
+               pm8001_ha->outbnd_q_tbl[i].ci_offset            =
+                       pm8001_mr32(addressob, (offsetob + 0x18));
+               pm8001_ha->outbnd_q_tbl[i].consumer_idx         = 0;
+               pm8001_ha->outbnd_q_tbl[i].producer_index       = 0;
+       }
+}
+
+/**
+ * update_main_config_table - update the main default table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_main_config_table(struct pm8001_hba_info *pm8001_ha)
+{
+       void __iomem *address = pm8001_ha->main_cfg_tbl_addr;
+       pm8001_mw32(address, 0x24,
+               pm8001_ha->main_cfg_tbl.inbound_q_nppd_hppd);
+       pm8001_mw32(address, 0x28,
+               pm8001_ha->main_cfg_tbl.outbound_hw_event_pid0_3);
+       pm8001_mw32(address, 0x2C,
+               pm8001_ha->main_cfg_tbl.outbound_hw_event_pid4_7);
+       pm8001_mw32(address, 0x30,
+               pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid0_3);
+       pm8001_mw32(address, 0x34,
+               pm8001_ha->main_cfg_tbl.outbound_ncq_event_pid4_7);
+       pm8001_mw32(address, 0x38,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid0_3);
+       pm8001_mw32(address, 0x3C,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_ITNexus_event_pid4_7);
+       pm8001_mw32(address, 0x40,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid0_3);
+       pm8001_mw32(address, 0x44,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_ssp_event_pid4_7);
+       pm8001_mw32(address, 0x48,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid0_3);
+       pm8001_mw32(address, 0x4C,
+               pm8001_ha->main_cfg_tbl.outbound_tgt_smp_event_pid4_7);
+       pm8001_mw32(address, 0x50,
+               pm8001_ha->main_cfg_tbl.upper_event_log_addr);
+       pm8001_mw32(address, 0x54,
+               pm8001_ha->main_cfg_tbl.lower_event_log_addr);
+       pm8001_mw32(address, 0x58, pm8001_ha->main_cfg_tbl.event_log_size);
+       pm8001_mw32(address, 0x5C, pm8001_ha->main_cfg_tbl.event_log_option);
+       pm8001_mw32(address, 0x60,
+               pm8001_ha->main_cfg_tbl.upper_iop_event_log_addr);
+       pm8001_mw32(address, 0x64,
+               pm8001_ha->main_cfg_tbl.lower_iop_event_log_addr);
+       pm8001_mw32(address, 0x68, pm8001_ha->main_cfg_tbl.iop_event_log_size);
+       pm8001_mw32(address, 0x6C,
+               pm8001_ha->main_cfg_tbl.iop_event_log_option);
+       pm8001_mw32(address, 0x70,
+               pm8001_ha->main_cfg_tbl.fatal_err_interrupt);
+}
+
+/**
+ * update_inbnd_queue_table - update the inbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_inbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+{
+       void __iomem *address = pm8001_ha->inbnd_q_tbl_addr;
+       u16 offset = number * 0x20;
+       pm8001_mw32(address, offset + 0x00,
+               pm8001_ha->inbnd_q_tbl[number].element_pri_size_cnt);
+       pm8001_mw32(address, offset + 0x04,
+               pm8001_ha->inbnd_q_tbl[number].upper_base_addr);
+       pm8001_mw32(address, offset + 0x08,
+               pm8001_ha->inbnd_q_tbl[number].lower_base_addr);
+       pm8001_mw32(address, offset + 0x0C,
+               pm8001_ha->inbnd_q_tbl[number].ci_upper_base_addr);
+       pm8001_mw32(address, offset + 0x10,
+               pm8001_ha->inbnd_q_tbl[number].ci_lower_base_addr);
+}
+
+/**
+ * update_outbnd_queue_table - update the outbound queue table to the HBA.
+ * @pm8001_ha: our hba card information
+ */
+static void __devinit
+update_outbnd_queue_table(struct pm8001_hba_info *pm8001_ha, int number)
+{
+       void __iomem *address = pm8001_ha->outbnd_q_tbl_addr;
+       u16 offset = number * 0x24;
+       pm8001_mw32(address, offset + 0x00,
+               pm8001_ha->outbnd_q_tbl[number].element_size_cnt);
+       pm8001_mw32(address, offset + 0x04,
+               pm8001_ha->outbnd_q_tbl[number].upper_base_addr);
+       pm8001_mw32(address, offset + 0x08,
+               pm8001_ha->outbnd_q_tbl[number].lower_base_addr);
+       pm8001_mw32(address, offset + 0x0C,
+               pm8001_ha->outbnd_q_tbl[number].pi_upper_base_addr);
+       pm8001_mw32(address, offset + 0x10,
+               pm8001_ha->outbnd_q_tbl[number].pi_lower_base_addr);
+       pm8001_mw32(address, offset + 0x1C,
+               pm8001_ha->outbnd_q_tbl[number].interrup_vec_cnt_delay);
+}
+
+/**
+ * bar4_shift - function is called to shift BAR base address
+ * @pm8001_ha : our hba card infomation
+ * @shiftValue : shifting value in memory bar.
+ */
+static u32 bar4_shift(struct pm8001_hba_info *pm8001_ha, u32 shiftValue)
+{
+       u32 regVal;
+       u32 max_wait_count;
+
+       /* program the inbound AXI translation Lower Address */
+       pm8001_cw32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW, shiftValue);
+
+       /* confirm the setting is written */
+       max_wait_count = 1 * 1000 * 1000;  /* 1 sec */
+       do {
+               udelay(1);
+               regVal = pm8001_cr32(pm8001_ha, 1, SPC_IBW_AXI_TRANSLATION_LOW);
+       } while ((regVal != shiftValue) && (--max_wait_count));
+
+       if (!max_wait_count) {
+               PM8001_INIT_DBG(pm8001_ha,
+                       pm8001_printk("TIMEOUT:SPC_IBW_AXI_TRANSLATION_LOW"
+                       " = 0x%x\n", regVal));
+               return -1;
+       }
+       return 0;
+}
+
+/**
+ * mpi_set_phys_g3_with_ssc
+ * @pm8001_ha: our hba card information
+ * @SSCbit: set SSCbit to 0 to disable all phys ssc; 1 to enable all phys ssc.
+ */
+static void __devinit
+mpi_set_phys_g3_with_ssc(struct pm8001_hba_info *pm8001_ha, u32 SSCbit)
+{
+       u32 offset;
+       u32 value;
+       u32 i;
+
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET 0x1074
+#define SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET 0x1074
+#define PHY_SSC_BIT_SHIFT 13
+
+   /*
+    * Using shifted destination address 0x3_0000:0x1074 + 0x4000*N (N=0:3)
+    * Using shifted destination address 0x4_0000:0x1074 + 0x4000*(N-4) (N=4:7)
+    */
+       if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_0_3_SHIFT_ADDR))
+               return;
+       /* set SSC bit of PHY 0 - 3 */
+       for (i = 0; i < 4; i++) {
+               offset = SAS2_SETTINGS_LOCAL_PHY_0_3_OFFSET + 0x4000 * i;
+               value = pm8001_cr32(pm8001_ha, 2, offset);
+               if (SSCbit)
+                       value = value | (0x00000001 << PHY_SSC_BIT_SHIFT);
+               else
+                       value = value & (~(0x00000001<<PHY_SSC_BIT_SHIFT));
+               pm8001_cw32(pm8001_ha, 2, offset, value);
+       }
+
+       /* shift membase 3 for SAS2_SETTINGS_LOCAL_PHY 4 - 7 */
+       if (-1 == bar4_shift(pm8001_ha, SAS2_SETTINGS_LOCAL_PHY_4_7_SHIFT_ADDR))
+               return;
+
+       /* set SSC bit of PHY 4 - 7 */
+       for (i = 4; i < 8; i++) {
+               offset = SAS2_SETTINGS_LOCAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+               value = pm8001_cr32(pm8001_ha, 2, offset);
+               if (SSCbit)
+                       value = value | (0x00000001 << PHY_SSC_BIT_SHIFT);
+               else
+                       value = value & (~(0x00000001<<PHY_SSC_BIT_SHIFT));
+               pm8001_cw32(pm8001_ha, 2, offset, value);
+       }
+
+       /*set the shifted destination address to 0x0 to avoid error operation */
+       bar4_shift(pm8001_ha, 0x0);
+       return;
+}
+
+/**
+ * mpi_set_open_retry_interval_reg
+ * @pm8001_ha: our hba card information
+ * @interval - interval time for each OPEN_REJECT (RETRY). The units are in 1us.
+ */
+static void __devinit
+mpi_set_open_retry_interval_reg(struct pm8001_hba_info *pm8001_ha,
+                               u32 interval)
+{
+       u32 offset;
+       u32 value;
+       u32 i;
+
+#define OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR 0x00030000
+#define OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR 0x00040000
+#define OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET 0x30B4
+#define OPEN_RETRY_INTERVAL_REG_MASK 0x0000FFFF
+
+       value = interval & OPEN_RETRY_INTERVAL_REG_MASK;
+       /* shift bar and set the OPEN_REJECT(RETRY) interval time of PHY 0 -3.*/
+       if (-1 == bar4_shift(pm8001_ha,
+                            OPEN_RETRY_INTERVAL_PHY_0_3_SHIFT_ADDR))
+               return;
+       for (i = 0; i < 4; i++) {
+               offset = OPEN_RETRY_INTERVAL_PHY_0_3_OFFSET + 0x4000 * i;
+               pm8001_cw32(pm8001_ha, 2, offset, value);
+       }
+
+       if (-1 == bar4_shift(pm8001_ha,
+                            OPEN_RETRY_INTERVAL_PHY_4_7_SHIFT_ADDR))
+               return;
+       for (i = 4; i < 8; i++) {
+               offset = OPEN_RETRY_INTERVAL_PHY_4_7_OFFSET + 0x4000 * (i-4);
+               pm8001_cw32(pm8001_ha, 2, offset, value);
+       }
+       /*set the shifted destination address to 0x0 to avoid error operation */
+       bar4_shift(pm8001_ha, 0x0);
+       return;
+}
+
+/**
+ * mpi_init_check - check firmware initialization status.
+ * @pm8001_ha: our hba card information
+ */
+static int mpi_init_check(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 max_wait_count;
+       u32 value;
+       u32 gst_len_mpistate;
+       /* Write bit0=1 to Inbound DoorBell Register to tell the SPC FW the
+       table is updated */
+       pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_UPDATE);
+       /* wait until Inbound DoorBell Clear Register toggled */
+       max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+       do {
+               udelay(1);
+               value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+               value &= SPC_MSGU_CFG_TABLE_UPDATE;
+       } while ((value != 0) && (--max_wait_count));
+
+       if (!max_wait_count)
+               return -1;
+       /* check the MPI-State for initialization */
+       gst_len_mpistate =
+               pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+               GST_GSTLEN_MPIS_OFFSET);
+       if (GST_MPI_STATE_INIT != (gst_len_mpistate & GST_MPI_STATE_MASK))
+               return -1;
+       /* check MPI Initialization error */
+       gst_len_mpistate = gst_len_mpistate >> 16;
+       if (0x0000 != gst_len_mpistate)
+               return -1;
+       return 0;
+}
+
+/**
+ * check_fw_ready - The LLDD check if the FW is ready, if not, return error.
+ * @pm8001_ha: our hba card information
+ */
+static int check_fw_ready(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 value, value1;
+       u32 max_wait_count;
+       /* check error state */
+       value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+       value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+       /* check AAP error */
+       if (SCRATCH_PAD1_ERR == (value & SCRATCH_PAD_STATE_MASK)) {
+               /* error state */
+               value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+               return -1;
+       }
+
+       /* check IOP error */
+       if (SCRATCH_PAD2_ERR == (value1 & SCRATCH_PAD_STATE_MASK)) {
+               /* error state */
+               value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3);
+               return -1;
+       }
+
+       /* bit 4-31 of scratch pad1 should be zeros if it is not
+       in error state*/
+       if (value & SCRATCH_PAD1_STATE_MASK) {
+               /* error case */
+               pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0);
+               return -1;
+       }
+
+       /* bit 2, 4-31 of scratch pad2 should be zeros if it is not
+       in error state */
+       if (value1 & SCRATCH_PAD2_STATE_MASK) {
+               /* error case */
+               return -1;
+       }
+
+       max_wait_count = 1 * 1000 * 1000;/* 1 sec timeout */
+
+       /* wait until scratch pad 1 and 2 registers in ready state  */
+       do {
+               udelay(1);
+               value = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+                       & SCRATCH_PAD1_RDY;
+               value1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+                       & SCRATCH_PAD2_RDY;
+               if ((--max_wait_count) == 0)
+                       return -1;
+       } while ((value != SCRATCH_PAD1_RDY) || (value1 != SCRATCH_PAD2_RDY));
+       return 0;
+}
+
+static void init_pci_device_addresses(struct pm8001_hba_info *pm8001_ha)
+{
+       void __iomem *base_addr;
+       u32     value;
+       u32     offset;
+       u32     pcibar;
+       u32     pcilogic;
+
+       value = pm8001_cr32(pm8001_ha, 0, 0x44);
+       offset = value & 0x03FFFFFF;
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("Scratchpad 0 Offset: %x \n", offset));
+       pcilogic = (value & 0xFC000000) >> 26;
+       pcibar = get_pci_bar_index(pcilogic);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("Scratchpad 0 PCI BAR: %d \n", pcibar));
+       pm8001_ha->main_cfg_tbl_addr = base_addr =
+               pm8001_ha->io_mem[pcibar].memvirtaddr + offset;
+       pm8001_ha->general_stat_tbl_addr =
+               base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x18);
+       pm8001_ha->inbnd_q_tbl_addr =
+               base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x1C);
+       pm8001_ha->outbnd_q_tbl_addr =
+               base_addr + pm8001_cr32(pm8001_ha, pcibar, offset + 0x20);
+}
+
+/**
+ * pm8001_chip_init - the main init function that initialize whole PM8001 chip.
+ * @pm8001_ha: our hba card information
+ */
+static int __devinit pm8001_chip_init(struct pm8001_hba_info *pm8001_ha)
+{
+       /* check the firmware status */
+       if (-1 == check_fw_ready(pm8001_ha)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Firmware is not ready!\n"));
+               return -EBUSY;
+       }
+
+       /* Initialize pci space address eg: mpi offset */
+       init_pci_device_addresses(pm8001_ha);
+       init_default_table_values(pm8001_ha);
+       read_main_config_table(pm8001_ha);
+       read_general_status_table(pm8001_ha);
+       read_inbnd_queue_table(pm8001_ha);
+       read_outbnd_queue_table(pm8001_ha);
+       /* update main config table ,inbound table and outbound table */
+       update_main_config_table(pm8001_ha);
+       update_inbnd_queue_table(pm8001_ha, 0);
+       update_outbnd_queue_table(pm8001_ha, 0);
+       mpi_set_phys_g3_with_ssc(pm8001_ha, 0);
+       mpi_set_open_retry_interval_reg(pm8001_ha, 7);
+       /* notify firmware update finished and check initialization status */
+       if (0 == mpi_init_check(pm8001_ha)) {
+               PM8001_INIT_DBG(pm8001_ha,
+                       pm8001_printk("MPI initialize successful!\n"));
+       } else
+               return -EBUSY;
+       /*This register is a 16-bit timer with a resolution of 1us. This is the
+       timer used for interrupt delay/coalescing in the PCIe Application Layer.
+       Zero is not a valid value. A value of 1 in the register will cause the
+       interrupts to be normal. A value greater than 1 will cause coalescing
+       delays.*/
+       pm8001_cw32(pm8001_ha, 1, 0x0033c0, 0x1);
+       pm8001_cw32(pm8001_ha, 1, 0x0033c4, 0x0);
+       return 0;
+}
+
+static int mpi_uninit_check(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 max_wait_count;
+       u32 value;
+       u32 gst_len_mpistate;
+       init_pci_device_addresses(pm8001_ha);
+       /* Write bit1=1 to Inbound DoorBell Register to tell the SPC FW the
+       table is stop */
+       pm8001_cw32(pm8001_ha, 0, MSGU_IBDB_SET, SPC_MSGU_CFG_TABLE_RESET);
+
+       /* wait until Inbound DoorBell Clear Register toggled */
+       max_wait_count = 1 * 1000 * 1000;/* 1 sec */
+       do {
+               udelay(1);
+               value = pm8001_cr32(pm8001_ha, 0, MSGU_IBDB_SET);
+               value &= SPC_MSGU_CFG_TABLE_RESET;
+       } while ((value != 0) && (--max_wait_count));
+
+       if (!max_wait_count) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("TIMEOUT:IBDB value/=0x%x\n", value));
+               return -1;
+       }
+
+       /* check the MPI-State for termination in progress */
+       /* wait until Inbound DoorBell Clear Register toggled */
+       max_wait_count = 1 * 1000 * 1000;  /* 1 sec */
+       do {
+               udelay(1);
+               gst_len_mpistate =
+                       pm8001_mr32(pm8001_ha->general_stat_tbl_addr,
+                       GST_GSTLEN_MPIS_OFFSET);
+               if (GST_MPI_STATE_UNINIT ==
+                       (gst_len_mpistate & GST_MPI_STATE_MASK))
+                       break;
+       } while (--max_wait_count);
+       if (!max_wait_count) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk(" TIME OUT MPI State = 0x%x\n",
+                               gst_len_mpistate & GST_MPI_STATE_MASK));
+               return -1;
+       }
+       return 0;
+}
+
+/**
+ * soft_reset_ready_check - Function to check FW is ready for soft reset.
+ * @pm8001_ha: our hba card information
+ */
+static u32 soft_reset_ready_check(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 regVal, regVal1, regVal2;
+       if (mpi_uninit_check(pm8001_ha) != 0) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("MPI state is not ready\n"));
+               return -1;
+       }
+       /* read the scratch pad 2 register bit 2 */
+       regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2)
+               & SCRATCH_PAD2_FWRDY_RST;
+       if (regVal == SCRATCH_PAD2_FWRDY_RST) {
+               PM8001_INIT_DBG(pm8001_ha,
+                       pm8001_printk("Firmware is ready for reset .\n"));
+       } else {
+       /* Trigger NMI twice via RB6 */
+               if (-1 == bar4_shift(pm8001_ha, RB6_ACCESS_REG)) {
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                                       RB6_ACCESS_REG));
+                       return -1;
+               }
+               pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET,
+                       RB6_MAGIC_NUMBER_RST);
+               pm8001_cw32(pm8001_ha, 2, SPC_RB6_OFFSET, RB6_MAGIC_NUMBER_RST);
+               /* wait for 100 ms */
+               mdelay(100);
+               regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2) &
+                       SCRATCH_PAD2_FWRDY_RST;
+               if (regVal != SCRATCH_PAD2_FWRDY_RST) {
+                       regVal1 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+                       regVal2 = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("TIMEOUT:MSGU_SCRATCH_PAD1"
+                               "=0x%x, MSGU_SCRATCH_PAD2=0x%x\n",
+                               regVal1, regVal2));
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_0)));
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_3)));
+                       return -1;
+               }
+       }
+       return 0;
+}
+
+/**
+ * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all
+ * the FW register status to the originated status.
+ * @pm8001_ha: our hba card information
+ * @signature: signature in host scratch pad0 register.
+ */
+static int
+pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha, u32 signature)
+{
+       u32     regVal, toggleVal;
+       u32     max_wait_count;
+       u32     regVal1, regVal2, regVal3;
+
+       /* step1: Check FW is ready for soft reset */
+       if (soft_reset_ready_check(pm8001_ha) != 0) {
+               PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("FW is not ready\n"));
+               return -1;
+       }
+
+       /* step 2: clear NMI status register on AAP1 and IOP, write the same
+       value to clear */
+       /* map 0x60000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, MBIC_AAP1_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                       MBIC_AAP1_ADDR_BASE));
+               return -1;
+       }
+       regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("MBIC - NMI Enable VPE0 (IOP)= 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_IOP, 0x0);
+       /* map 0x70000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, MBIC_IOP_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                       MBIC_IOP_ADDR_BASE));
+               return -1;
+       }
+       regVal = pm8001_cr32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("MBIC - NMI Enable VPE0 (AAP1)= 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 2, MBIC_NMI_ENABLE_VPE0_AAP1, 0x0);
+
+       regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("PCIE -Event Interrupt Enable = 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT_ENABLE, 0x0);
+
+       regVal = pm8001_cr32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("PCIE - Event Interrupt  = 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 1, PCIE_EVENT_INTERRUPT, regVal);
+
+       regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("PCIE -Error Interrupt Enable = 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT_ENABLE, 0x0);
+
+       regVal = pm8001_cr32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("PCIE - Error Interrupt = 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 1, PCIE_ERROR_INTERRUPT, regVal);
+
+       /* read the scratch pad 1 register bit 2 */
+       regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1)
+               & SCRATCH_PAD1_RST;
+       toggleVal = regVal ^ SCRATCH_PAD1_RST;
+
+       /* set signature in host scratch pad0 register to tell SPC that the
+       host performs the soft reset */
+       pm8001_cw32(pm8001_ha, 0, MSGU_HOST_SCRATCH_PAD_0, signature);
+
+       /* read required registers for confirmming */
+       /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                       GSM_ADDR_BASE));
+               return -1;
+       }
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x0(0x00007b88)-GSM Configuration and"
+               " Reset = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+       /* step 3: host read GSM Configuration and Reset register */
+       regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+       /* Put those bits to low */
+       /* GSM XCBI offset = 0x70 0000
+       0x00 Bit 13 COM_SLV_SW_RSTB 1
+       0x00 Bit 12 QSSP_SW_RSTB 1
+       0x00 Bit 11 RAAE_SW_RSTB 1
+       0x00 Bit 9 RB_1_SW_RSTB 1
+       0x00 Bit 8 SM_SW_RSTB 1
+       */
+       regVal &= ~(0x00003b00);
+       /* host write GSM Configuration and Reset register */
+       pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x0 (0x00007b88 ==> 0x00004088) - GSM "
+               "Configuration and Reset is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+       /* step 4: */
+       /* disable GSM - Read Address Parity Check */
+       regVal1 = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700038 - Read Address Parity Check "
+               "Enable = 0x%x\n", regVal1));
+       pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, 0x0);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+               "is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+
+       /* disable GSM - Write Address Parity Check */
+       regVal2 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+               " Enable = 0x%x\n", regVal2));
+       pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, 0x0);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700040 - Write Address Parity Check "
+               "Enable is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+
+       /* disable GSM - Write Data Parity Check */
+       regVal3 = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x300048 - Write Data Parity Check"
+               " Enable = 0x%x\n", regVal3));
+       pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, 0x0);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x300048 - Write Data Parity Check Enable"
+               "is set to = 0x%x\n",
+       pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+       /* step 5: delay 10 usec */
+       udelay(10);
+       /* step 5-b: set GPIO-0 output control to tristate anyway */
+       if (-1 == bar4_shift(pm8001_ha, GPIO_ADDR_BASE)) {
+               PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                               GPIO_ADDR_BASE));
+               return -1;
+       }
+       regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
+               PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("GPIO Output Control Register:"
+                               " = 0x%x\n", regVal));
+       /* set GPIO-0 output control to tri-state */
+       regVal &= 0xFFFFFFFC;
+       pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
+
+       /* Step 6: Reset the IOP and AAP1 */
+       /* map 0x00000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+                       SPC_TOP_LEVEL_ADDR_BASE));
+               return -1;
+       }
+       regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("Top Register before resetting IOP/AAP1"
+               ":= 0x%x\n", regVal));
+       regVal &= ~(SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+       pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+       /* step 7: Reset the BDMA/OSSP */
+       regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("Top Register before resetting BDMA/OSSP"
+               ": = 0x%x\n", regVal));
+       regVal &= ~(SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+       pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+       /* step 8: delay 10 usec */
+       udelay(10);
+
+       /* step 9: bring the BDMA and OSSP out of reset */
+       regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("Top Register before bringing up BDMA/OSSP"
+               ":= 0x%x\n", regVal));
+       regVal |= (SPC_REG_RESET_BDMA_CORE | SPC_REG_RESET_OSSP);
+       pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+       /* step 10: delay 10 usec */
+       udelay(10);
+
+       /* step 11: reads and sets the GSM Configuration and Reset Register */
+       /* map 0x0700000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, GSM_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("SPC Shift Bar4 to 0x%x failed\n",
+                       GSM_ADDR_BASE));
+               return -1;
+       }
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x0 (0x00007b88)-GSM Configuration and "
+               "Reset = 0x%x\n", pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+       regVal = pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET);
+       /* Put those bits to high */
+       /* GSM XCBI offset = 0x70 0000
+       0x00 Bit 13 COM_SLV_SW_RSTB 1
+       0x00 Bit 12 QSSP_SW_RSTB 1
+       0x00 Bit 11 RAAE_SW_RSTB 1
+       0x00 Bit 9   RB_1_SW_RSTB 1
+       0x00 Bit 8   SM_SW_RSTB 1
+       */
+       regVal |= (GSM_CONFIG_RESET_VALUE);
+       pm8001_cw32(pm8001_ha, 2, GSM_CONFIG_RESET, regVal);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM (0x00004088 ==> 0x00007b88) - GSM"
+               " Configuration and Reset is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_CONFIG_RESET)));
+
+       /* step 12: Restore GSM - Read Address Parity Check */
+       regVal = pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK);
+       /* just for debugging */
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700038 - Read Address Parity Check Enable"
+               " = 0x%x\n", regVal));
+       pm8001_cw32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK, regVal1);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700038 - Read Address Parity"
+               " Check Enable is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_READ_ADDR_PARITY_CHECK)));
+       /* Restore GSM - Write Address Parity Check */
+       regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK);
+       pm8001_cw32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK, regVal2);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700040 - Write Address Parity Check"
+               " Enable is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_WRITE_ADDR_PARITY_CHECK)));
+       /* Restore GSM - Write Data Parity Check */
+       regVal = pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK);
+       pm8001_cw32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK, regVal3);
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("GSM 0x700048 - Write Data Parity Check Enable"
+               "is set to = 0x%x\n",
+               pm8001_cr32(pm8001_ha, 2, GSM_WRITE_DATA_PARITY_CHECK)));
+
+       /* step 13: bring the IOP and AAP1 out of reset */
+       /* map 0x00000 to BAR4(0x20), BAR2(win) */
+       if (-1 == bar4_shift(pm8001_ha, SPC_TOP_LEVEL_ADDR_BASE)) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Shift Bar4 to 0x%x failed\n",
+                       SPC_TOP_LEVEL_ADDR_BASE));
+               return -1;
+       }
+       regVal = pm8001_cr32(pm8001_ha, 2, SPC_REG_RESET);
+       regVal |= (SPC_REG_RESET_PCS_IOP_SS | SPC_REG_RESET_PCS_AAP1_SS);
+       pm8001_cw32(pm8001_ha, 2, SPC_REG_RESET, regVal);
+
+       /* step 14: delay 10 usec - Normal Mode */
+       udelay(10);
+       /* check Soft Reset Normal mode or Soft Reset HDA mode */
+       if (signature == SPC_SOFT_RESET_SIGNATURE) {
+               /* step 15 (Normal Mode): wait until scratch pad1 register
+               bit 2 toggled */
+               max_wait_count = 2 * 1000 * 1000;/* 2 sec */
+               do {
+                       udelay(1);
+                       regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1) &
+                               SCRATCH_PAD1_RST;
+               } while ((regVal != toggleVal) && (--max_wait_count));
+
+               if (!max_wait_count) {
+                       regVal = pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_1);
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("TIMEOUT : ToggleVal 0x%x,"
+                               "MSGU_SCRATCH_PAD1 = 0x%x\n",
+                               toggleVal, regVal));
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_0)));
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD2 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_2)));
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_3)));
+                       return -1;
+               }
+
+               /* step 16 (Normal) - Clear ODMR and ODCR */
+               pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+               pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+
+               /* step 17 (Normal Mode): wait for the FW and IOP to get
+               ready - 1 sec timeout */
+               /* Wait for the SPC Configuration Table to be ready */
+               if (check_fw_ready(pm8001_ha) == -1) {
+                       regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_1);
+                       /* return error if MPI Configuration Table not ready */
+                       PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("FW not ready SCRATCH_PAD1"
+                               " = 0x%x\n", regVal));
+                       regVal = pm8001_cr32(pm8001_ha, 0, MSGU_SCRATCH_PAD_2);
+                       /* return error if MPI Configuration Table not ready */
+                       PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("FW not ready SCRATCH_PAD2"
+                               " = 0x%x\n", regVal));
+                       PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD0 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_0)));
+                       PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("SCRATCH_PAD3 value = 0x%x\n",
+                               pm8001_cr32(pm8001_ha, 0,
+                               MSGU_SCRATCH_PAD_3)));
+                       return -1;
+               }
+       }
+
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("SPC soft reset Complete\n"));
+       return 0;
+}
+
+static void pm8001_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 i;
+       u32 regVal;
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("chip reset start\n"));
+
+       /* do SPC chip reset. */
+       regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+       regVal &= ~(SPC_REG_RESET_DEVICE);
+       pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+       /* delay 10 usec */
+       udelay(10);
+
+       /* bring chip reset out of reset */
+       regVal = pm8001_cr32(pm8001_ha, 1, SPC_REG_RESET);
+       regVal |= SPC_REG_RESET_DEVICE;
+       pm8001_cw32(pm8001_ha, 1, SPC_REG_RESET, regVal);
+
+       /* delay 10 usec */
+       udelay(10);
+
+       /* wait for 20 msec until the firmware gets reloaded */
+       i = 20;
+       do {
+               mdelay(1);
+       } while ((--i) != 0);
+
+       PM8001_INIT_DBG(pm8001_ha,
+               pm8001_printk("chip reset finished\n"));
+}
+
+/**
+ * pm8001_chip_iounmap - which maped when initilized.
+ * @pm8001_ha: our hba card information
+ */
+static void pm8001_chip_iounmap(struct pm8001_hba_info *pm8001_ha)
+{
+       s8 bar, logical = 0;
+       for (bar = 0; bar < 6; bar++) {
+               /*
+               ** logical BARs for SPC:
+               ** bar 0 and 1 - logical BAR0
+               ** bar 2 and 3 - logical BAR1
+               ** bar4 - logical BAR2
+               ** bar5 - logical BAR3
+               ** Skip the appropriate assignments:
+               */
+               if ((bar == 1) || (bar == 3))
+                       continue;
+               if (pm8001_ha->io_mem[logical].memvirtaddr) {
+                       iounmap(pm8001_ha->io_mem[logical].memvirtaddr);
+                       logical++;
+               }
+       }
+}
+
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+       pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_CLEAR_ALL);
+       pm8001_cw32(pm8001_ha, 0, MSGU_ODCR, ODCR_CLEAR_ALL);
+}
+
+ /**
+  * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+  * @pm8001_ha: our hba card information
+  */
+static void
+pm8001_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+       pm8001_cw32(pm8001_ha, 0, MSGU_ODMR, ODMR_MASK_ALL);
+}
+
+/**
+ * pm8001_chip_msix_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_enable(struct pm8001_hba_info *pm8001_ha,
+       u32 int_vec_idx)
+{
+       u32 msi_index;
+       u32 value;
+       msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+       msi_index += MSIX_TABLE_BASE;
+       pm8001_cw32(pm8001_ha, 0, msi_index, MSIX_INTERRUPT_ENABLE);
+       value = (1 << int_vec_idx);
+       pm8001_cw32(pm8001_ha, 0,  MSGU_ODCR, value);
+
+}
+
+/**
+ * pm8001_chip_msix_interrupt_disable - disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_msix_interrupt_disable(struct pm8001_hba_info *pm8001_ha,
+       u32 int_vec_idx)
+{
+       u32 msi_index;
+       msi_index = int_vec_idx * MSIX_TABLE_ELEMENT_SIZE;
+       msi_index += MSIX_TABLE_BASE;
+       pm8001_cw32(pm8001_ha, 0,  msi_index, MSIX_INTERRUPT_DISABLE);
+
+}
+/**
+ * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+       pm8001_chip_msix_interrupt_enable(pm8001_ha, 0);
+       return;
+#endif
+       pm8001_chip_intx_interrupt_enable(pm8001_ha);
+
+}
+
+/**
+ * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt
+ * @pm8001_ha: our hba card information
+ */
+static void
+pm8001_chip_interrupt_disable(struct pm8001_hba_info *pm8001_ha)
+{
+#ifdef PM8001_USE_MSIX
+       pm8001_chip_msix_interrupt_disable(pm8001_ha, 0);
+       return;
+#endif
+       pm8001_chip_intx_interrupt_disable(pm8001_ha);
+
+}
+
+/**
+ * mpi_msg_free_get- get the free message buffer for transfer inbound queue.
+ * @circularQ: the inbound queue  we want to transfer to HBA.
+ * @messageSize: the message size of this transfer, normally it is 64 bytes
+ * @messagePtr: the pointer to message.
+ */
+static u32 mpi_msg_free_get(struct inbound_queue_table *circularQ,
+                           u16 messageSize, void **messagePtr)
+{
+       u32 offset, consumer_index;
+       struct mpi_msg_hdr *msgHeader;
+       u8 bcCount = 1; /* only support single buffer */
+
+       /* Checks is the requested message size can be allocated in this queue*/
+       if (messageSize > 64) {
+               *messagePtr = NULL;
+               return -1;
+       }
+
+       /* Stores the new consumer index */
+       consumer_index = pm8001_read_32(circularQ->ci_virt);
+       circularQ->consumer_index = cpu_to_le32(consumer_index);
+       if (((circularQ->producer_idx + bcCount) % 256) ==
+               circularQ->consumer_index) {
+               *messagePtr = NULL;
+               return -1;
+       }
+       /* get memory IOMB buffer address */
+       offset = circularQ->producer_idx * 64;
+       /* increment to next bcCount element */
+       circularQ->producer_idx = (circularQ->producer_idx + bcCount) % 256;
+       /* Adds that distance to the base of the region virtual address plus
+       the message header size*/
+       msgHeader = (struct mpi_msg_hdr *)(circularQ->base_virt + offset);
+       *messagePtr = ((void *)msgHeader) + sizeof(struct mpi_msg_hdr);
+       return 0;
+}
+
+/**
+ * mpi_build_cmd- build the message queue for transfer, update the PI to FW
+ * to tell the fw to get this message from IOMB.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the inbound queue we want to transfer to HBA.
+ * @opCode: the operation code represents commands which LLDD and fw recognized.
+ * @payload: the command payload of each operation command.
+ */
+static u32 mpi_build_cmd(struct pm8001_hba_info *pm8001_ha,
+                        struct inbound_queue_table *circularQ,
+                        u32 opCode, void *payload)
+{
+       u32 Header = 0, hpriority = 0, bc = 1, category = 0x02;
+       u32 responseQueue = 0;
+       void *pMessage;
+
+       if (mpi_msg_free_get(circularQ, 64, &pMessage) < 0) {
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("No free mpi buffer \n"));
+               return -1;
+       }
+
+       /*Copy to the payload*/
+       memcpy(pMessage, payload, (64 - sizeof(struct mpi_msg_hdr)));
+
+       /*Build the header*/
+       Header = ((1 << 31) | (hpriority << 30) | ((bc & 0x1f) << 24)
+               | ((responseQueue & 0x3F) << 16)
+               | ((category & 0xF) << 12) | (opCode & 0xFFF));
+
+       pm8001_write_32((pMessage - 4), 0, cpu_to_le32(Header));
+       /*Update the PI to the firmware*/
+       pm8001_cw32(pm8001_ha, circularQ->pi_pci_bar,
+               circularQ->pi_offset, circularQ->producer_idx);
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("after PI= %d CI= %d \n", circularQ->producer_idx,
+               circularQ->consumer_index));
+       return 0;
+}
+
+static u32 mpi_msg_free_set(struct pm8001_hba_info *pm8001_ha,
+                           struct outbound_queue_table *circularQ, u8 bc)
+{
+       u32 producer_index;
+       /* free the circular queue buffer elements associated with the message*/
+       circularQ->consumer_idx = (circularQ->consumer_idx + bc) % 256;
+       /* update the CI of outbound queue */
+       pm8001_cw32(pm8001_ha, circularQ->ci_pci_bar, circularQ->ci_offset,
+               circularQ->consumer_idx);
+       /* Update the producer index from SPC*/
+       producer_index = pm8001_read_32(circularQ->pi_virt);
+       circularQ->producer_index = cpu_to_le32(producer_index);
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk(" CI=%d PI=%d\n", circularQ->consumer_idx,
+               circularQ->producer_index));
+       return 0;
+}
+
+/**
+ * mpi_msg_consume- get the MPI message from  outbound queue message table.
+ * @pm8001_ha: our hba card information
+ * @circularQ: the outbound queue  table.
+ * @messagePtr1: the message contents of this outbound message.
+ * @pBC: the message size.
+ */
+static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
+                          struct outbound_queue_table *circularQ,
+                          void **messagePtr1, u8 *pBC)
+{
+       struct mpi_msg_hdr      *msgHeader;
+       __le32  msgHeader_tmp;
+       u32 header_tmp;
+       do {
+               /* If there are not-yet-delivered messages ... */
+               if (circularQ->producer_index != circularQ->consumer_idx) {
+                       PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk("process an IOMB\n"));
+                       /*Get the pointer to the circular queue buffer element*/
+                       msgHeader = (struct mpi_msg_hdr *)
+                               (circularQ->base_virt +
+                               circularQ->consumer_idx * 64);
+                       /* read header */
+                       header_tmp = pm8001_read_32(msgHeader);
+                       msgHeader_tmp = cpu_to_le32(header_tmp);
+                       if (0 != (msgHeader_tmp & 0x80000000)) {
+                               if (OPC_OUB_SKIP_ENTRY !=
+                                       (msgHeader_tmp & 0xfff)) {
+                                       *messagePtr1 =
+                                               ((u8 *)msgHeader) +
+                                               sizeof(struct mpi_msg_hdr);
+                                       *pBC = (u8)((msgHeader_tmp >> 24) &
+                                               0x1f);
+                                       PM8001_IO_DBG(pm8001_ha,
+                                               pm8001_printk("mpi_msg_consume"
+                                               ": CI=%d PI=%d msgHeader=%x\n",
+                                               circularQ->consumer_idx,
+                                               circularQ->producer_index,
+                                               msgHeader_tmp));
+                                       return MPI_IO_STATUS_SUCCESS;
+                               } else {
+                                       u32 producer_index;
+                                       void *pi_virt = circularQ->pi_virt;
+                                       /* free the circular queue buffer
+                                       elements associated with the message*/
+                                       circularQ->consumer_idx =
+                                               (circularQ->consumer_idx +
+                                               ((msgHeader_tmp >> 24) & 0x1f))
+                                               % 256;
+                                       /* update the CI of outbound queue */
+                                       pm8001_cw32(pm8001_ha,
+                                               circularQ->ci_pci_bar,
+                                               circularQ->ci_offset,
+                                               circularQ->consumer_idx);
+                                       /* Update the producer index from SPC */
+                                       producer_index =
+                                               pm8001_read_32(pi_virt);
+                                       circularQ->producer_index =
+                                               cpu_to_le32(producer_index);
+                               }
+                       } else
+                               return MPI_IO_STATUS_FAIL;
+               }
+       } while (circularQ->producer_index != circularQ->consumer_idx);
+       /* while we don't have any more not-yet-delivered message */
+       /* report empty */
+       return MPI_IO_STATUS_BUSY;
+}
+
+static void pm8001_work_queue(struct work_struct *work)
+{
+       struct delayed_work *dw = container_of(work, struct delayed_work, work);
+       struct pm8001_wq *wq = container_of(dw, struct pm8001_wq, work_q);
+       struct pm8001_device *pm8001_dev;
+       struct domain_device    *dev;
+
+       switch (wq->handler) {
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               pm8001_dev = wq->data;
+               dev = pm8001_dev->sas_device;
+               pm8001_I_T_nexus_reset(dev);
+               break;
+       case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+               pm8001_dev = wq->data;
+               dev = pm8001_dev->sas_device;
+               pm8001_I_T_nexus_reset(dev);
+               break;
+       case IO_DS_IN_ERROR:
+               pm8001_dev = wq->data;
+               dev = pm8001_dev->sas_device;
+               pm8001_I_T_nexus_reset(dev);
+               break;
+       case IO_DS_NON_OPERATIONAL:
+               pm8001_dev = wq->data;
+               dev = pm8001_dev->sas_device;
+               pm8001_I_T_nexus_reset(dev);
+               break;
+       }
+       list_del(&wq->entry);
+       kfree(wq);
+}
+
+static int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
+                              int handler)
+{
+       struct pm8001_wq *wq;
+       int ret = 0;
+
+       wq = kmalloc(sizeof(struct pm8001_wq), GFP_ATOMIC);
+       if (wq) {
+               wq->pm8001_ha = pm8001_ha;
+               wq->data = data;
+               wq->handler = handler;
+               INIT_DELAYED_WORK(&wq->work_q, pm8001_work_queue);
+               list_add_tail(&wq->entry, &pm8001_ha->wq_list);
+               schedule_delayed_work(&wq->work_q, 0);
+       } else
+               ret = -ENOMEM;
+
+       return ret;
+}
+
+/**
+ * mpi_ssp_completion- process the event that FW response to the SSP request.
+ * @pm8001_ha: our hba card information
+ * @piomb: the message contents of this outbound message.
+ *
+ * When FW has completed a ssp request for example a IO request, after it has
+ * filled the SG data with the data, it will trigger this event represent
+ * that he has finished the job,please check the coresponding buffer.
+ * So we will tell the caller who maybe waiting the result to tell upper layer
+ * that the task has been finished.
+ */
+static int
+mpi_ssp_completion(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+       struct sas_task *t;
+       struct pm8001_ccb_info *ccb;
+       unsigned long flags;
+       u32 status;
+       u32 param;
+       u32 tag;
+       struct ssp_completion_resp *psspPayload;
+       struct task_status_struct *ts;
+       struct ssp_response_iu *iu;
+       struct pm8001_device *pm8001_dev;
+       psspPayload = (struct ssp_completion_resp *)(piomb + 4);
+       status = le32_to_cpu(psspPayload->status);
+       tag = le32_to_cpu(psspPayload->tag);
+       ccb = &pm8001_ha->ccb_info[tag];
+       pm8001_dev = ccb->device;
+       param = le32_to_cpu(psspPayload->param);
+
+       PM8001_IO_DBG(pm8001_ha, pm8001_printk("OPC_OUB_SSP_COMP\n"));
+       t = ccb->task;
+
+       if (status)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("sas IO status 0x%x\n", status));
+       if (unlikely(!t || !t->lldd_task || !t->dev))
+               return -1;
+       ts = &t->task_status;
+       switch (status) {
+       case IO_SUCCESS:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS"
+                       ",param = %d \n", param));
+               if (param == 0) {
+                       ts->resp = SAS_TASK_COMPLETE;
+                       ts->stat = SAM_GOOD;
+               } else {
+                       ts->resp = SAS_TASK_COMPLETE;
+                       ts->stat = SAS_PROTO_RESPONSE;
+                       ts->residual = param;
+                       iu = &psspPayload->ssp_resp_iu;
+                       sas_ssp_task_response(pm8001_ha->dev, t, iu);
+               }
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_ABORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_ABORTED IOMB Tag \n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_ABORTED_TASK;
+               break;
+       case IO_UNDERFLOW:
+               /* SSP Completion with error */
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW"
+                       ",param = %d \n", param));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_UNDERRUN;
+               ts->residual = param;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_NO_DEVICE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_NO_DEVICE\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_PHY_DOWN;
+               break;
+       case IO_XFER_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_XFER_ERROR_PHY_NOT_READY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_EPROTO;
+               break;
+       case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+               break;
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               if (!t->uldd_task)
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+               break;
+       case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+               break;
+       case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+                       "NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+               break;
+       case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+               break;
+       case IO_XFER_ERROR_NAK_RECEIVED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_ERROR_DMA:
+               PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("IO_XFER_ERROR_DMA\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_XFER_OPEN_RETRY_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_XFER_ERROR_OFFSET_MISMATCH:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_PORT_IN_RESET:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_PORT_IN_RESET\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_DS_NON_OPERATIONAL:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               if (!t->uldd_task)
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_DS_NON_OPERATIONAL);
+               break;
+       case IO_DS_IN_RECOVERY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_IN_RECOVERY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_TM_TAG_NOT_FOUND:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_TM_TAG_NOT_FOUND\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_SSP_EXT_IU_ZERO_LEN_ERROR:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_SSP_EXT_IU_ZERO_LEN_ERROR\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+       default:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("Unknown status 0x%x\n", status));
+               /* not allowed case. Therefore, return failed status */
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       }
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("scsi_satus = %x \n ",
+               psspPayload->ssp_resp_iu.status));
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+                       " io_status 0x%x resp 0x%x "
+                       "stat 0x%x but aborted by upper layer!\n",
+                       t, status, ts->resp, ts->stat));
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+       } else {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+               mb();/* in order to force CPU ordering */
+               t->task_done(t);
+       }
+       return 0;
+}
+
+/*See the comments for mpi_ssp_completion */
+static int mpi_ssp_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+       struct sas_task *t;
+       unsigned long flags;
+       struct task_status_struct *ts;
+       struct pm8001_ccb_info *ccb;
+       struct pm8001_device *pm8001_dev;
+       struct ssp_event_resp *psspPayload =
+               (struct ssp_event_resp *)(piomb + 4);
+       u32 event = le32_to_cpu(psspPayload->event);
+       u32 tag = le32_to_cpu(psspPayload->tag);
+       u32 port_id = le32_to_cpu(psspPayload->port_id);
+       u32 dev_id = le32_to_cpu(psspPayload->device_id);
+
+       ccb = &pm8001_ha->ccb_info[tag];
+       t = ccb->task;
+       pm8001_dev = ccb->device;
+       if (event)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("sas IO status 0x%x\n", event));
+       if (unlikely(!t || !t->lldd_task || !t->dev))
+               return -1;
+       ts = &t->task_status;
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("port_id = %x,device_id = %x\n",
+               port_id, dev_id));
+       switch (event) {
+       case IO_OVERFLOW:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n");)
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               ts->residual = 0;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_XFER_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_INTERRUPTED;
+               break;
+       case IO_XFER_ERROR_PHY_NOT_READY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+                       "_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_EPROTO;
+               break;
+       case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+               break;
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               if (!t->uldd_task)
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+               break;
+       case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+               break;
+       case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+                       "NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+               break;
+       case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+               break;
+       case IO_XFER_ERROR_NAK_RECEIVED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               break;
+       case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_OPEN_RETRY_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_XFER_ERROR_UNEXPECTED_PHASE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_ERROR_OFFSET_MISMATCH:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       case IO_XFER_CMD_FRAME_ISSUED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("  IO_XFER_CMD_FRAME_ISSUED\n"));
+               return 0;
+       default:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("Unknown status 0x%x\n", event));
+               /* not allowed case. Therefore, return failed status */
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               break;
+       }
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+                       " event 0x%x resp 0x%x "
+                       "stat 0x%x but aborted by upper layer!\n",
+                       t, event, ts->resp, ts->stat));
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+       } else {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+               mb();/* in order to force CPU ordering */
+               t->task_done(t);
+       }
+       return 0;
+}
+
+/*See the comments for mpi_ssp_completion */
+static int
+mpi_sata_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct sas_task *t;
+       struct pm8001_ccb_info *ccb;
+       unsigned long flags;
+       u32 param;
+       u32 status;
+       u32 tag;
+       struct sata_completion_resp *psataPayload;
+       struct task_status_struct *ts;
+       struct ata_task_resp *resp ;
+       u32 *sata_resp;
+       struct pm8001_device *pm8001_dev;
+
+       psataPayload = (struct sata_completion_resp *)(piomb + 4);
+       status = le32_to_cpu(psataPayload->status);
+       tag = le32_to_cpu(psataPayload->tag);
+
+       ccb = &pm8001_ha->ccb_info[tag];
+       param = le32_to_cpu(psataPayload->param);
+       t = ccb->task;
+       ts = &t->task_status;
+       pm8001_dev = ccb->device;
+       if (status)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("sata IO status 0x%x\n", status));
+       if (unlikely(!t || !t->lldd_task || !t->dev))
+               return -1;
+
+       switch (status) {
+       case IO_SUCCESS:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+               if (param == 0) {
+                       ts->resp = SAS_TASK_COMPLETE;
+                       ts->stat = SAM_GOOD;
+               } else {
+                       u8 len;
+                       ts->resp = SAS_TASK_COMPLETE;
+                       ts->stat = SAS_PROTO_RESPONSE;
+                       ts->residual = param;
+                       PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk("SAS_PROTO_RESPONSE len = %d\n",
+                               param));
+                       sata_resp = &psataPayload->sata_resp[0];
+                       resp = (struct ata_task_resp *)ts->buf;
+                       if (t->ata_task.dma_xfer == 0 &&
+                       t->data_dir == PCI_DMA_FROMDEVICE) {
+                               len = sizeof(struct pio_setup_fis);
+                               PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk("PIO read len = %d\n", len));
+                       } else if (t->ata_task.use_ncq) {
+                               len = sizeof(struct set_dev_bits_fis);
+                               PM8001_IO_DBG(pm8001_ha,
+                                       pm8001_printk("FPDMA len = %d\n", len));
+                       } else {
+                               len = sizeof(struct dev_to_host_fis);
+                               PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk("other len = %d\n", len));
+                       }
+                       if (SAS_STATUS_BUF_SIZE >= sizeof(*resp)) {
+                               resp->frame_len = len;
+                               memcpy(&resp->ending_fis[0], sata_resp, len);
+                               ts->buf_valid_size = sizeof(*resp);
+                       } else
+                               PM8001_IO_DBG(pm8001_ha,
+                                       pm8001_printk("response to large \n"));
+               }
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_ABORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_ABORTED IOMB Tag \n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_ABORTED_TASK;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+               /* following cases are to do cases */
+       case IO_UNDERFLOW:
+               /* SATA Completion with error */
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_UNDERFLOW param = %d\n", param));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_UNDERRUN;
+               ts->residual =  param;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_NO_DEVICE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_NO_DEVICE\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_PHY_DOWN;
+               break;
+       case IO_XFER_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_INTERRUPTED;
+               break;
+       case IO_XFER_ERROR_PHY_NOT_READY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+                       "_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_EPROTO;
+               break;
+       case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+               break;
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+                       ts->resp = SAS_TASK_UNDELIVERED;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/*in order to force CPU ordering*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+                       ts->resp = SAS_TASK_UNDELIVERED;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/*ditto*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+                       "NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+               break;
+       case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_STP_RESOURCES"
+                       "_BUSY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY);
+                       ts->resp = SAS_TASK_UNDELIVERED;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/* ditto*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+               break;
+       case IO_XFER_ERROR_NAK_RECEIVED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_ERROR_ACK_NAK_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_ACK_NAK_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_ERROR_DMA:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_DMA\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_ABORTED_TASK;
+               break;
+       case IO_XFER_ERROR_SATA_LINK_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_SATA_LINK_TIMEOUT\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_UNDERRUN;
+               break;
+       case IO_XFER_OPEN_RETRY_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_PORT_IN_RESET:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_PORT_IN_RESET\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       case IO_DS_NON_OPERATIONAL:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha, pm8001_dev,
+                                   IO_DS_NON_OPERATIONAL);
+                       ts->resp = SAS_TASK_UNDELIVERED;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/*ditto*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_DS_IN_RECOVERY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("  IO_DS_IN_RECOVERY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       case IO_DS_IN_ERROR:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_IN_ERROR\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha, pm8001_dev,
+                                   IO_DS_IN_ERROR);
+                       ts->resp = SAS_TASK_UNDELIVERED;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/*ditto*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+       default:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("Unknown status 0x%x\n", status));
+               /* not allowed case. Therefore, return failed status */
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       }
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("task 0x%p done with io_status 0x%x"
+                       " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+                       t, status, ts->resp, ts->stat));
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+       } else {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+               mb();/* ditto */
+               t->task_done(t);
+       }
+       return 0;
+}
+
+/*See the comments for mpi_ssp_completion */
+static int mpi_sata_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+       struct sas_task *t;
+       unsigned long flags;
+       struct task_status_struct *ts;
+       struct pm8001_ccb_info *ccb;
+       struct pm8001_device *pm8001_dev;
+       struct sata_event_resp *psataPayload =
+               (struct sata_event_resp *)(piomb + 4);
+       u32 event = le32_to_cpu(psataPayload->event);
+       u32 tag = le32_to_cpu(psataPayload->tag);
+       u32 port_id = le32_to_cpu(psataPayload->port_id);
+       u32 dev_id = le32_to_cpu(psataPayload->device_id);
+
+       ccb = &pm8001_ha->ccb_info[tag];
+       t = ccb->task;
+       pm8001_dev = ccb->device;
+       if (event)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("sata IO status 0x%x\n", event));
+       if (unlikely(!t || !t->lldd_task || !t->dev))
+               return -1;
+       ts = &t->task_status;
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("port_id = %x,device_id = %x\n",
+               port_id, dev_id));
+       switch (event) {
+       case IO_OVERFLOW:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               ts->residual = 0;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_XFER_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_INTERRUPTED;
+               break;
+       case IO_XFER_ERROR_PHY_NOT_READY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT"
+                       "_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_EPROTO;
+               break;
+       case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+               break;
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               if (!t->uldd_task) {
+                       pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+                       ts->resp = SAS_TASK_COMPLETE;
+                       ts->stat = SAS_QUEUE_FULL;
+                       pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+                       mb();/*ditto*/
+                       t->task_done(t);
+                       return 0;
+               }
+               break;
+       case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+               ts->resp = SAS_TASK_UNDELIVERED;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+               break;
+       case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+                       "NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+               break;
+       case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+               break;
+       case IO_XFER_ERROR_NAK_RECEIVED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_NAK_RECEIVED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_ERROR_PEER_ABORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PEER_ABORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_NAK_R_ERR;
+               break;
+       case IO_XFER_ERROR_REJECTED_NCQ_MODE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_REJECTED_NCQ_MODE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_UNDERRUN;
+               break;
+       case IO_XFER_OPEN_RETRY_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_ERROR_UNEXPECTED_PHASE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_UNEXPECTED_PHASE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_ERROR_XFER_RDY_OVERRUN:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_XFER_RDY_OVERRUN\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_ERROR_OFFSET_MISMATCH:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_OFFSET_MISMATCH\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_ERROR_XFER_ZERO_DATA_LEN:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_XFER_ZERO_DATA_LEN\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       case IO_XFER_CMD_FRAME_ISSUED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_CMD_FRAME_ISSUED\n"));
+               break;
+       case IO_XFER_PIO_SETUP_ERROR:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_PIO_SETUP_ERROR\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       default:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("Unknown status 0x%x\n", event));
+               /* not allowed case. Therefore, return failed status */
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_TO;
+               break;
+       }
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("task 0x%p done with io_status 0x%x"
+                       " resp 0x%x stat 0x%x but aborted by upper layer!\n",
+                       t, event, ts->resp, ts->stat));
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+       } else {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+               mb();/* in order to force CPU ordering */
+               t->task_done(t);
+       }
+       return 0;
+}
+
+/*See the comments for mpi_ssp_completion */
+static int
+mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       u32 param;
+       struct sas_task *t;
+       struct pm8001_ccb_info *ccb;
+       unsigned long flags;
+       u32 status;
+       u32 tag;
+       struct smp_completion_resp *psmpPayload;
+       struct task_status_struct *ts;
+       struct pm8001_device *pm8001_dev;
+
+       psmpPayload = (struct smp_completion_resp *)(piomb + 4);
+       status = le32_to_cpu(psmpPayload->status);
+       tag = le32_to_cpu(psmpPayload->tag);
+
+       ccb = &pm8001_ha->ccb_info[tag];
+       param = le32_to_cpu(psmpPayload->param);
+       t = ccb->task;
+       ts = &t->task_status;
+       pm8001_dev = ccb->device;
+       if (status)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("smp IO status 0x%x\n", status));
+       if (unlikely(!t || !t->lldd_task || !t->dev))
+               return -1;
+
+       switch (status) {
+       case IO_SUCCESS:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAM_GOOD;
+       if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_ABORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_ABORTED IOMB\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_ABORTED_TASK;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_OVERFLOW:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_UNDERFLOW\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DATA_OVERRUN;
+               ts->residual = 0;
+               if (pm8001_dev)
+                       pm8001_dev->running_req--;
+               break;
+       case IO_NO_DEVICE:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NO_DEVICE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_PHY_DOWN;
+               break;
+       case IO_ERROR_HW_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_ERROR_HW_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAM_BUSY;
+               break;
+       case IO_XFER_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAM_BUSY;
+               break;
+       case IO_XFER_ERROR_PHY_NOT_READY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_PHY_NOT_READY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAM_BUSY;
+               break;
+       case IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk("IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_ZONE_VIOLATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_ZONE_VIOLATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               break;
+       case IO_OPEN_CNX_ERROR_BREAK:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BREAK\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_CONT0;
+               break;
+       case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_UNKNOWN;
+               pm8001_handle_event(pm8001_ha,
+                               pm8001_dev,
+                               IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS);
+               break;
+       case IO_OPEN_CNX_ERROR_BAD_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_BAD_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_BAD_DEST;
+               break;
+       case IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_CONNECTION_RATE_"
+                       "NOT_SUPPORTED\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_CONN_RATE;
+               break;
+       case IO_OPEN_CNX_ERROR_WRONG_DESTINATION:
+               PM8001_IO_DBG(pm8001_ha,
+                      pm8001_printk("IO_OPEN_CNX_ERROR_WRONG_DESTINATION\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_WRONG_DEST;
+               break;
+       case IO_XFER_ERROR_RX_FRAME:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_ERROR_RX_FRAME\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       case IO_XFER_OPEN_RETRY_TIMEOUT:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_XFER_OPEN_RETRY_TIMEOUT\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_ERROR_INTERNAL_SMP_RESOURCE:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_ERROR_INTERNAL_SMP_RESOURCE\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_QUEUE_FULL;
+               break;
+       case IO_PORT_IN_RESET:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_PORT_IN_RESET\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_DS_NON_OPERATIONAL:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_NON_OPERATIONAL\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               break;
+       case IO_DS_IN_RECOVERY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_DS_IN_RECOVERY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       case IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_OPEN_REJECT;
+               ts->open_rej_reason = SAS_OREJ_RSVD_RETRY;
+               break;
+       default:
+               PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk("Unknown status 0x%x\n", status));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAS_DEV_NO_RESPONSE;
+               /* not allowed case. Therefore, return failed status */
+               break;
+       }
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       if (unlikely((t->task_state_flags & SAS_TASK_STATE_ABORTED))) {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               PM8001_FAIL_DBG(pm8001_ha, pm8001_printk("task 0x%p done with"
+                       " io_status 0x%x resp 0x%x "
+                       "stat 0x%x but aborted by upper layer!\n",
+                       t, status, ts->resp, ts->stat));
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+       } else {
+               spin_unlock_irqrestore(&t->task_state_lock, flags);
+               pm8001_ccb_task_free(pm8001_ha, t, ccb, tag);
+               mb();/* in order to force CPU ordering */
+               t->task_done(t);
+       }
+       return 0;
+}
+
+static void
+mpi_set_dev_state_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct set_dev_state_resp *pPayload =
+               (struct set_dev_state_resp *)(piomb + 4);
+       u32 tag = le32_to_cpu(pPayload->tag);
+       struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+       struct pm8001_device *pm8001_dev = ccb->device;
+       u32 status = le32_to_cpu(pPayload->status);
+       u32 device_id = le32_to_cpu(pPayload->device_id);
+       u8 pds = le32_to_cpu(pPayload->pds_nds) | PDS_BITS;
+       u8 nds = le32_to_cpu(pPayload->pds_nds) | NDS_BITS;
+       PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set device id = 0x%x state "
+               "from 0x%x to 0x%x status = 0x%x!\n",
+               device_id, pds, nds, status));
+       complete(pm8001_dev->setds_completion);
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static void
+mpi_set_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct get_nvm_data_resp *pPayload =
+               (struct get_nvm_data_resp *)(piomb + 4);
+       u32 tag = le32_to_cpu(pPayload->tag);
+       struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+       u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+       complete(pm8001_ha->nvmd_completion);
+       PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Set nvm data complete!\n"));
+       if ((dlen_status & NVMD_STAT) != 0) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Set nvm data error!\n"));
+               return;
+       }
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static void
+mpi_get_nvmd_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct fw_control_ex    *fw_control_context;
+       struct get_nvm_data_resp *pPayload =
+               (struct get_nvm_data_resp *)(piomb + 4);
+       u32 tag = le32_to_cpu(pPayload->tag);
+       struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+       u32 dlen_status = le32_to_cpu(pPayload->dlen_status);
+       u32 ir_tds_bn_dps_das_nvm =
+               le32_to_cpu(pPayload->ir_tda_bn_dps_das_nvm);
+       void *virt_addr = pm8001_ha->memoryMap.region[NVMD].virt_ptr;
+       fw_control_context = ccb->fw_control_context;
+
+       PM8001_MSG_DBG(pm8001_ha, pm8001_printk("Get nvm data complete!\n"));
+       if ((dlen_status & NVMD_STAT) != 0) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Get nvm data error!\n"));
+               complete(pm8001_ha->nvmd_completion);
+               return;
+       }
+
+       if (ir_tds_bn_dps_das_nvm & IPMode) {
+               /* indirect mode - IR bit set */
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("Get NVMD success, IR=1\n"));
+               if ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == TWI_DEVICE) {
+                       if (ir_tds_bn_dps_das_nvm == 0x80a80200) {
+                               memcpy(pm8001_ha->sas_addr,
+                                     ((u8 *)virt_addr + 4),
+                                      SAS_ADDR_SIZE);
+                               PM8001_MSG_DBG(pm8001_ha,
+                                       pm8001_printk("Get SAS address"
+                                       " from VPD successfully!\n"));
+                       }
+               } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == C_SEEPROM)
+                       || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == VPD_FLASH) ||
+                       ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == EXPAN_ROM)) {
+                               ;
+               } else if (((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == AAP1_RDUMP)
+                       || ((ir_tds_bn_dps_das_nvm & NVMD_TYPE) == IOP_RDUMP)) {
+                       ;
+               } else {
+                       /* Should not be happened*/
+                       PM8001_MSG_DBG(pm8001_ha,
+                               pm8001_printk("(IR=1)Wrong Device type 0x%x\n",
+                               ir_tds_bn_dps_das_nvm));
+               }
+       } else /* direct mode */{
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("Get NVMD success, IR=0, dataLen=%d\n",
+                       (dlen_status & NVMD_LEN) >> 24));
+       }
+       memcpy((void *)(fw_control_context->usrAddr),
+               (void *)(pm8001_ha->memoryMap.region[NVMD].virt_ptr),
+               fw_control_context->len);
+       complete(pm8001_ha->nvmd_completion);
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, tag);
+}
+
+static int mpi_local_phy_ctl(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct local_phy_ctl_resp *pPayload =
+               (struct local_phy_ctl_resp *)(piomb + 4);
+       u32 status = le32_to_cpu(pPayload->status);
+       u32 phy_id = le32_to_cpu(pPayload->phyop_phyid) & ID_BITS;
+       u32 phy_op = le32_to_cpu(pPayload->phyop_phyid) & OP_BITS;
+       if (status != 0) {
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("%x phy execute %x phy op failed! \n",
+                       phy_id, phy_op));
+       } else
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("%x phy execute %x phy op success! \n",
+                       phy_id, phy_op));
+       return 0;
+}
+
+/**
+ * pm8001_bytes_dmaed - one of the interface function communication with libsas
+ * @pm8001_ha: our hba card information
+ * @i: which phy that received the event.
+ *
+ * when HBA driver received the identify done event or initiate FIS received
+ * event(for SATA), it will invoke this function to notify the sas layer that
+ * the sas toplogy has formed, please discover the the whole sas domain,
+ * while receive a broadcast(change) primitive just tell the sas
+ * layer to discover the changed domain rather than the whole domain.
+ */
+static void pm8001_bytes_dmaed(struct pm8001_hba_info *pm8001_ha, int i)
+{
+       struct pm8001_phy *phy = &pm8001_ha->phy[i];
+       struct asd_sas_phy *sas_phy = &phy->sas_phy;
+       struct sas_ha_struct *sas_ha;
+       if (!phy->phy_attached)
+               return;
+
+       sas_ha = pm8001_ha->sas;
+       if (sas_phy->phy) {
+               struct sas_phy *sphy = sas_phy->phy;
+               sphy->negotiated_linkrate = sas_phy->linkrate;
+               sphy->minimum_linkrate = phy->minimum_linkrate;
+               sphy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+               sphy->maximum_linkrate = phy->maximum_linkrate;
+               sphy->maximum_linkrate_hw = phy->maximum_linkrate;
+       }
+
+       if (phy->phy_type & PORT_TYPE_SAS) {
+               struct sas_identify_frame *id;
+               id = (struct sas_identify_frame *)phy->frame_rcvd;
+               id->dev_type = phy->identify.device_type;
+               id->initiator_bits = SAS_PROTOCOL_ALL;
+               id->target_bits = phy->identify.target_port_protocols;
+       } else if (phy->phy_type & PORT_TYPE_SATA) {
+               /*Nothing*/
+       }
+       PM8001_MSG_DBG(pm8001_ha, pm8001_printk("phy %d byte dmaded.\n", i));
+
+       sas_phy->frame_rcvd_size = phy->frame_rcvd_size;
+       pm8001_ha->sas->notify_port_event(sas_phy, PORTE_BYTES_DMAED);
+}
+
+/* Get the link rate speed  */
+static void get_lrate_mode(struct pm8001_phy *phy, u8 link_rate)
+{
+       struct sas_phy *sas_phy = phy->sas_phy.phy;
+
+       switch (link_rate) {
+       case PHY_SPEED_60:
+               phy->sas_phy.linkrate = SAS_LINK_RATE_6_0_GBPS;
+               phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+               break;
+       case PHY_SPEED_30:
+               phy->sas_phy.linkrate = SAS_LINK_RATE_3_0_GBPS;
+               phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
+               break;
+       case PHY_SPEED_15:
+               phy->sas_phy.linkrate = SAS_LINK_RATE_1_5_GBPS;
+               phy->sas_phy.phy->negotiated_linkrate = SAS_LINK_RATE_1_5_GBPS;
+               break;
+       }
+       sas_phy->negotiated_linkrate = phy->sas_phy.linkrate;
+       sas_phy->maximum_linkrate_hw = SAS_LINK_RATE_6_0_GBPS;
+       sas_phy->minimum_linkrate_hw = SAS_LINK_RATE_1_5_GBPS;
+       sas_phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
+       sas_phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
+}
+
+/**
+ * asd_get_attached_sas_addr -- extract/generate attached SAS address
+ * @phy: pointer to asd_phy
+ * @sas_addr: pointer to buffer where the SAS address is to be written
+ *
+ * This function extracts the SAS address from an IDENTIFY frame
+ * received.  If OOB is SATA, then a SAS address is generated from the
+ * HA tables.
+ *
+ * LOCKING: the frame_rcvd_lock needs to be held since this parses the frame
+ * buffer.
+ */
+static void pm8001_get_attached_sas_addr(struct pm8001_phy *phy,
+       u8 *sas_addr)
+{
+       if (phy->sas_phy.frame_rcvd[0] == 0x34
+               && phy->sas_phy.oob_mode == SATA_OOB_MODE) {
+               struct pm8001_hba_info *pm8001_ha = phy->sas_phy.ha->lldd_ha;
+               /* FIS device-to-host */
+               u64 addr = be64_to_cpu(*(__be64 *)pm8001_ha->sas_addr);
+               addr += phy->sas_phy.id;
+               *(__be64 *)sas_addr = cpu_to_be64(addr);
+       } else {
+               struct sas_identify_frame *idframe =
+                       (void *) phy->sas_phy.frame_rcvd;
+               memcpy(sas_addr, idframe->sas_addr, SAS_ADDR_SIZE);
+       }
+}
+
+/**
+ * pm8001_hw_event_ack_req- For PM8001,some events need to acknowage to FW.
+ * @pm8001_ha: our hba card information
+ * @Qnum: the outbound queue message number.
+ * @SEA: source of event to ack
+ * @port_id: port id.
+ * @phyId: phy id.
+ * @param0: parameter 0.
+ * @param1: parameter 1.
+ */
+static void pm8001_hw_event_ack_req(struct pm8001_hba_info *pm8001_ha,
+       u32 Qnum, u32 SEA, u32 port_id, u32 phyId, u32 param0, u32 param1)
+{
+       struct hw_event_ack_req  payload;
+       u32 opc = OPC_INB_SAS_HW_EVENT_ACK;
+
+       struct inbound_queue_table *circularQ;
+
+       memset((u8 *)&payload, 0, sizeof(payload));
+       circularQ = &pm8001_ha->inbnd_q_tbl[Qnum];
+       payload.tag = 1;
+       payload.sea_phyid_portid = cpu_to_le32(((SEA & 0xFFFF) << 8) |
+               ((phyId & 0x0F) << 4) | (port_id & 0x0F));
+       payload.param0 = cpu_to_le32(param0);
+       payload.param1 = cpu_to_le32(param1);
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+}
+
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+       u32 phyId, u32 phy_op);
+
+/**
+ * hw_event_sas_phy_up -FW tells me a SAS phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sas_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct hw_event_resp *pPayload =
+               (struct hw_event_resp *)(piomb + 4);
+       u32 lr_evt_status_phyid_portid =
+               le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+       u8 link_rate =
+               (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+       u8 phy_id =
+               (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+       struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+       struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+       unsigned long flags;
+       u8 deviceType = pPayload->sas_identify.dev_type;
+
+       PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk("HW_EVENT_SAS_PHY_UP \n"));
+
+       switch (deviceType) {
+       case SAS_PHY_UNUSED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("device type no device.\n"));
+               break;
+       case SAS_END_DEVICE:
+               PM8001_MSG_DBG(pm8001_ha, pm8001_printk("end device.\n"));
+               pm8001_chip_phy_ctl_req(pm8001_ha, phy_id,
+                       PHY_NOTIFY_ENABLE_SPINUP);
+               get_lrate_mode(phy, link_rate);
+               break;
+       case SAS_EDGE_EXPANDER_DEVICE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("expander device.\n"));
+               get_lrate_mode(phy, link_rate);
+               break;
+       case SAS_FANOUT_EXPANDER_DEVICE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("fanout expander device.\n"));
+               get_lrate_mode(phy, link_rate);
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("unkown device type(%x)\n", deviceType));
+               break;
+       }
+       phy->phy_type |= PORT_TYPE_SAS;
+       phy->identify.device_type = deviceType;
+       phy->phy_attached = 1;
+       if (phy->identify.device_type == SAS_END_DEV)
+               phy->identify.target_port_protocols = SAS_PROTOCOL_SSP;
+       else if (phy->identify.device_type != NO_DEVICE)
+               phy->identify.target_port_protocols = SAS_PROTOCOL_SMP;
+       phy->sas_phy.oob_mode = SAS_OOB_MODE;
+       sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+       spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+       memcpy(phy->frame_rcvd, &pPayload->sas_identify,
+               sizeof(struct sas_identify_frame)-4);
+       phy->frame_rcvd_size = sizeof(struct sas_identify_frame) - 4;
+       pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+       spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+       if (pm8001_ha->flags == PM8001F_RUN_TIME)
+               mdelay(200);/*delay a moment to wait disk to spinup*/
+       pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_sata_phy_up -FW tells me a SATA phy up event.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_sata_phy_up(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct hw_event_resp *pPayload =
+               (struct hw_event_resp *)(piomb + 4);
+       u32 lr_evt_status_phyid_portid =
+               le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+       u8 link_rate =
+               (u8)((lr_evt_status_phyid_portid & 0xF0000000) >> 28);
+       u8 phy_id =
+               (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+       struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+       struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+       unsigned long flags;
+       get_lrate_mode(phy, link_rate);
+       phy->phy_type |= PORT_TYPE_SATA;
+       phy->phy_attached = 1;
+       phy->sas_phy.oob_mode = SATA_OOB_MODE;
+       sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_DONE);
+       spin_lock_irqsave(&phy->sas_phy.frame_rcvd_lock, flags);
+       memcpy(phy->frame_rcvd, ((u8 *)&pPayload->sata_fis - 4),
+               sizeof(struct dev_to_host_fis));
+       phy->frame_rcvd_size = sizeof(struct dev_to_host_fis);
+       phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
+       phy->identify.device_type = SATA_DEV;
+       pm8001_get_attached_sas_addr(phy, phy->sas_phy.attached_sas_addr);
+       spin_unlock_irqrestore(&phy->sas_phy.frame_rcvd_lock, flags);
+       pm8001_bytes_dmaed(pm8001_ha, phy_id);
+}
+
+/**
+ * hw_event_phy_down -we should notify the libsas the phy is down.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void
+hw_event_phy_down(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct hw_event_resp *pPayload =
+               (struct hw_event_resp *)(piomb + 4);
+       u32 lr_evt_status_phyid_portid =
+               le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+       u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+       u8 phy_id =
+               (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+       u32 npip_portstate = le32_to_cpu(pPayload->npip_portstate);
+       u8 portstate = (u8)(npip_portstate & 0x0000000F);
+
+       switch (portstate) {
+       case PORT_VALID:
+               break;
+       case PORT_INVALID:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" PortInvalid portID %d \n", port_id));
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" Last phy Down and port invalid\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+                       port_id, phy_id, 0, 0);
+               break;
+       case PORT_IN_RESET:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" PortInReset portID %d \n", port_id));
+               break;
+       case PORT_NOT_ESTABLISHED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" phy Down and PORT_NOT_ESTABLISHED\n"));
+               break;
+       case PORT_LOSTCOMM:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" phy Down and PORT_LOSTCOMM\n"));
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" Last phy Down and port invalid\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_PHY_DOWN,
+                       port_id, phy_id, 0, 0);
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" phy Down and(default) = %x\n",
+                       portstate));
+               break;
+
+       }
+}
+
+/**
+ * mpi_reg_resp -process register device ID response.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ *
+ * when sas layer find a device it will notify LLDD, then the driver register
+ * the domain device to FW, this event is the return device ID which the FW
+ * has assigned, from now,inter-communication with FW is no longer using the
+ * SAS address, use device ID which FW assigned.
+ */
+static int mpi_reg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       u32 status;
+       u32 device_id;
+       u32 htag;
+       struct pm8001_ccb_info *ccb;
+       struct pm8001_device *pm8001_dev;
+       struct dev_reg_resp *registerRespPayload =
+               (struct dev_reg_resp *)(piomb + 4);
+
+       htag = le32_to_cpu(registerRespPayload->tag);
+       ccb = &pm8001_ha->ccb_info[registerRespPayload->tag];
+       pm8001_dev = ccb->device;
+       status = le32_to_cpu(registerRespPayload->status);
+       device_id = le32_to_cpu(registerRespPayload->device_id);
+       PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk(" register device is status = %d\n", status));
+       switch (status) {
+       case DEVREG_SUCCESS:
+               PM8001_MSG_DBG(pm8001_ha, pm8001_printk("DEVREG_SUCCESS\n"));
+               pm8001_dev->device_id = device_id;
+               break;
+       case DEVREG_FAILURE_OUT_OF_RESOURCE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("DEVREG_FAILURE_OUT_OF_RESOURCE\n"));
+               break;
+       case DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED:
+               PM8001_MSG_DBG(pm8001_ha,
+                  pm8001_printk("DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED\n"));
+               break;
+       case DEVREG_FAILURE_INVALID_PHY_ID:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("DEVREG_FAILURE_INVALID_PHY_ID\n"));
+               break;
+       case DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED:
+               PM8001_MSG_DBG(pm8001_ha,
+                  pm8001_printk("DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED\n"));
+               break;
+       case DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE\n"));
+               break;
+       case DEVREG_FAILURE_PORT_NOT_VALID_STATE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("DEVREG_FAILURE_PORT_NOT_VALID_STATE\n"));
+               break;
+       case DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID:
+               PM8001_MSG_DBG(pm8001_ha,
+                      pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID\n"));
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                pm8001_printk("DEVREG_FAILURE_DEVICE_TYPE_NOT_UNSORPORTED\n"));
+               break;
+       }
+       complete(pm8001_dev->dcompletion);
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, htag);
+       return 0;
+}
+
+static int mpi_dereg_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       u32 status;
+       u32 device_id;
+       struct dev_reg_resp *registerRespPayload =
+               (struct dev_reg_resp *)(piomb + 4);
+
+       status = le32_to_cpu(registerRespPayload->status);
+       device_id = le32_to_cpu(registerRespPayload->device_id);
+       if (status != 0)
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(" deregister device failed ,status = %x"
+                       ", device_id = %x\n", status, device_id));
+       return 0;
+}
+
+static int
+mpi_fw_flash_update_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       u32 status;
+       struct fw_control_ex    fw_control_context;
+       struct fw_flash_Update_resp *ppayload =
+               (struct fw_flash_Update_resp *)(piomb + 4);
+       u32 tag = le32_to_cpu(ppayload->tag);
+       struct pm8001_ccb_info *ccb = &pm8001_ha->ccb_info[tag];
+       status = le32_to_cpu(ppayload->status);
+       memcpy(&fw_control_context,
+               ccb->fw_control_context,
+               sizeof(fw_control_context));
+       switch (status) {
+       case FLASH_UPDATE_COMPLETE_PENDING_REBOOT:
+               PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk(": FLASH_UPDATE_COMPLETE_PENDING_REBOOT\n"));
+               break;
+       case FLASH_UPDATE_IN_PROGRESS:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_IN_PROGRESS\n"));
+               break;
+       case FLASH_UPDATE_HDR_ERR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_HDR_ERR\n"));
+               break;
+       case FLASH_UPDATE_OFFSET_ERR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_OFFSET_ERR\n"));
+               break;
+       case FLASH_UPDATE_CRC_ERR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_CRC_ERR\n"));
+               break;
+       case FLASH_UPDATE_LENGTH_ERR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_LENGTH_ERR\n"));
+               break;
+       case FLASH_UPDATE_HW_ERR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_HW_ERR\n"));
+               break;
+       case FLASH_UPDATE_DNLD_NOT_SUPPORTED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_DNLD_NOT_SUPPORTED\n"));
+               break;
+       case FLASH_UPDATE_DISABLED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk(": FLASH_UPDATE_DISABLED\n"));
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("No matched status = %d\n", status));
+               break;
+       }
+       ccb->fw_control_context->fw_control->retcode = status;
+       pci_free_consistent(pm8001_ha->pdev,
+                       fw_control_context.len,
+                       fw_control_context.virtAddr,
+                       fw_control_context.phys_addr);
+       complete(pm8001_ha->nvmd_completion);
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, tag);
+       return 0;
+}
+
+static int
+mpi_general_event(struct pm8001_hba_info *pm8001_ha , void *piomb)
+{
+       u32 status;
+       int i;
+       struct general_event_resp *pPayload =
+               (struct general_event_resp *)(piomb + 4);
+       status = le32_to_cpu(pPayload->status);
+       PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk(" status = 0x%x\n", status));
+       for (i = 0; i < GENERAL_EVENT_PAYLOAD; i++)
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("inb_IOMB_payload[0x%x] 0x%x, \n", i,
+                       pPayload->inb_IOMB_payload[i]));
+       return 0;
+}
+
+static int
+mpi_task_abort_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       struct sas_task *t;
+       struct pm8001_ccb_info *ccb;
+       unsigned long flags;
+       u32 status ;
+       u32 tag, scp;
+       struct task_status_struct *ts;
+
+       struct task_abort_resp *pPayload =
+               (struct task_abort_resp *)(piomb + 4);
+       ccb = &pm8001_ha->ccb_info[pPayload->tag];
+       t = ccb->task;
+       ts = &t->task_status;
+
+       if (t == NULL)
+               return -1;
+
+       status = le32_to_cpu(pPayload->status);
+       tag = le32_to_cpu(pPayload->tag);
+       scp = le32_to_cpu(pPayload->scp);
+       PM8001_IO_DBG(pm8001_ha,
+               pm8001_printk(" status = 0x%x\n", status));
+       if (status != 0)
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("task abort failed tag = 0x%x,"
+                       " scp= 0x%x\n", tag, scp));
+       switch (status) {
+       case IO_SUCCESS:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
+               ts->resp = SAS_TASK_COMPLETE;
+               ts->stat = SAM_GOOD;
+               break;
+       case IO_NOT_VALID:
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_NOT_VALID\n"));
+               ts->resp = TMF_RESP_FUNC_FAILED;
+               break;
+       }
+       spin_lock_irqsave(&t->task_state_lock, flags);
+       t->task_state_flags &= ~SAS_TASK_STATE_PENDING;
+       t->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
+       t->task_state_flags |= SAS_TASK_STATE_DONE;
+       spin_unlock_irqrestore(&t->task_state_lock, flags);
+       pm8001_ccb_task_free(pm8001_ha, t, ccb, pPayload->tag);
+       mb();
+       t->task_done(t);
+       return 0;
+}
+
+/**
+ * mpi_hw_event -The hw event has come.
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
+{
+       unsigned long flags;
+       struct hw_event_resp *pPayload =
+               (struct hw_event_resp *)(piomb + 4);
+       u32 lr_evt_status_phyid_portid =
+               le32_to_cpu(pPayload->lr_evt_status_phyid_portid);
+       u8 port_id = (u8)(lr_evt_status_phyid_portid & 0x0000000F);
+       u8 phy_id =
+               (u8)((lr_evt_status_phyid_portid & 0x000000F0) >> 4);
+       u16 eventType =
+               (u16)((lr_evt_status_phyid_portid & 0x00FFFF00) >> 8);
+       u8 status =
+               (u8)((lr_evt_status_phyid_portid & 0x0F000000) >> 24);
+       struct sas_ha_struct *sas_ha = pm8001_ha->sas;
+       struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+       struct asd_sas_phy *sas_phy = sas_ha->sas_phy[phy_id];
+       PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk("outbound queue HW event & event type : "));
+       switch (eventType) {
+       case HW_EVENT_PHY_START_STATUS:
+               PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk("HW_EVENT_PHY_START_STATUS"
+                       " status = %x\n", status));
+               if (status == 0) {
+                       phy->phy_state = 1;
+                       if (pm8001_ha->flags == PM8001F_RUN_TIME)
+                               complete(phy->enable_completion);
+               }
+               break;
+       case HW_EVENT_SAS_PHY_UP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PHY_START_STATUS \n"));
+               hw_event_sas_phy_up(pm8001_ha, piomb);
+               break;
+       case HW_EVENT_SATA_PHY_UP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_SATA_PHY_UP \n"));
+               hw_event_sata_phy_up(pm8001_ha, piomb);
+               break;
+       case HW_EVENT_PHY_STOP_STATUS:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PHY_STOP_STATUS "
+                       "status = %x\n", status));
+               if (status == 0)
+                       phy->phy_state = 0;
+               break;
+       case HW_EVENT_SATA_SPINUP_HOLD:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_SATA_SPINUP_HOLD \n"));
+               sas_ha->notify_phy_event(&phy->sas_phy, PHYE_SPINUP_HOLD);
+               break;
+       case HW_EVENT_PHY_DOWN:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PHY_DOWN \n"));
+               sas_ha->notify_phy_event(&phy->sas_phy, PHYE_LOSS_OF_SIGNAL);
+               phy->phy_attached = 0;
+               phy->phy_state = 0;
+               hw_event_phy_down(pm8001_ha, piomb);
+               break;
+       case HW_EVENT_PORT_INVALID:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PORT_INVALID\n"));
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       /* the broadcast change primitive received, tell the LIBSAS this event
+       to revalidate the sas domain*/
+       case HW_EVENT_BROADCAST_CHANGE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_BROADCAST_CHANGE\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0, HW_EVENT_BROADCAST_CHANGE,
+                       port_id, phy_id, 1, 0);
+               spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+               sas_phy->sas_prim = HW_EVENT_BROADCAST_CHANGE;
+               spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+               sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+               break;
+       case HW_EVENT_PHY_ERROR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PHY_ERROR\n"));
+               sas_phy_disconnected(&phy->sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_phy_event(&phy->sas_phy, PHYE_OOB_ERROR);
+               break;
+       case HW_EVENT_BROADCAST_EXP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_BROADCAST_EXP\n"));
+               spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+               sas_phy->sas_prim = HW_EVENT_BROADCAST_EXP;
+               spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+               sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+               break;
+       case HW_EVENT_LINK_ERR_INVALID_DWORD:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_LINK_ERR_INVALID_DWORD\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_LINK_ERR_INVALID_DWORD, port_id, phy_id, 0, 0);
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_LINK_ERR_DISPARITY_ERROR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_LINK_ERR_DISPARITY_ERROR\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_LINK_ERR_DISPARITY_ERROR,
+                       port_id, phy_id, 0, 0);
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_LINK_ERR_CODE_VIOLATION:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_LINK_ERR_CODE_VIOLATION\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_LINK_ERR_CODE_VIOLATION,
+                       port_id, phy_id, 0, 0);
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH:
+               PM8001_MSG_DBG(pm8001_ha,
+                     pm8001_printk("HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH,
+                       port_id, phy_id, 0, 0);
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_MALFUNCTION:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_MALFUNCTION\n"));
+               break;
+       case HW_EVENT_BROADCAST_SES:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_BROADCAST_SES\n"));
+               spin_lock_irqsave(&sas_phy->sas_prim_lock, flags);
+               sas_phy->sas_prim = HW_EVENT_BROADCAST_SES;
+               spin_unlock_irqrestore(&sas_phy->sas_prim_lock, flags);
+               sas_ha->notify_port_event(sas_phy, PORTE_BROADCAST_RCVD);
+               break;
+       case HW_EVENT_INBOUND_CRC_ERROR:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_INBOUND_CRC_ERROR\n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_INBOUND_CRC_ERROR,
+                       port_id, phy_id, 0, 0);
+               break;
+       case HW_EVENT_HARD_RESET_RECEIVED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_HARD_RESET_RECEIVED\n"));
+               sas_ha->notify_port_event(sas_phy, PORTE_HARD_RESET);
+               break;
+       case HW_EVENT_ID_FRAME_TIMEOUT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_ID_FRAME_TIMEOUT\n"));
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_LINK_ERR_PHY_RESET_FAILED:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_LINK_ERR_PHY_RESET_FAILED \n"));
+               pm8001_hw_event_ack_req(pm8001_ha, 0,
+                       HW_EVENT_LINK_ERR_PHY_RESET_FAILED,
+                       port_id, phy_id, 0, 0);
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_PORT_RESET_TIMER_TMO:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PORT_RESET_TIMER_TMO \n"));
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_PORT_RECOVERY_TIMER_TMO:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PORT_RECOVERY_TIMER_TMO \n"));
+               sas_phy_disconnected(sas_phy);
+               phy->phy_attached = 0;
+               sas_ha->notify_port_event(sas_phy, PORTE_LINK_RESET_ERR);
+               break;
+       case HW_EVENT_PORT_RECOVER:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PORT_RECOVER \n"));
+               break;
+       case HW_EVENT_PORT_RESET_COMPLETE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("HW_EVENT_PORT_RESET_COMPLETE \n"));
+               break;
+       case EVENT_BROADCAST_ASYNCH_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("EVENT_BROADCAST_ASYNCH_EVENT\n"));
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("Unknown event type = %x\n", eventType));
+               break;
+       }
+       return 0;
+}
+
+/**
+ * process_one_iomb - process one outbound Queue memory block
+ * @pm8001_ha: our hba card information
+ * @piomb: IO message buffer
+ */
+static void process_one_iomb(struct pm8001_hba_info *pm8001_ha, void *piomb)
+{
+       u32 pHeader = (u32)*(u32 *)piomb;
+       u8 opc = (u8)((le32_to_cpu(pHeader)) & 0xFFF);
+
+       PM8001_MSG_DBG(pm8001_ha, pm8001_printk("process_one_iomb:\n"));
+
+       switch (opc) {
+       case OPC_OUB_ECHO:
+               PM8001_MSG_DBG(pm8001_ha, pm8001_printk("OPC_OUB_ECHO \n"));
+               break;
+       case OPC_OUB_HW_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_HW_EVENT \n"));
+               mpi_hw_event(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SSP_COMP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SSP_COMP \n"));
+               mpi_ssp_completion(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SMP_COMP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SMP_COMP \n"));
+               mpi_smp_completion(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_LOCAL_PHY_CNTRL:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_LOCAL_PHY_CNTRL\n"));
+               mpi_local_phy_ctl(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_DEV_REGIST:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_DEV_REGIST \n"));
+               mpi_reg_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_DEREG_DEV:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("unresgister the deviece \n"));
+               mpi_dereg_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_GET_DEV_HANDLE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GET_DEV_HANDLE \n"));
+               break;
+       case OPC_OUB_SATA_COMP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SATA_COMP \n"));
+               mpi_sata_completion(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SATA_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SATA_EVENT \n"));
+               mpi_sata_event(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SSP_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SSP_EVENT\n"));
+               mpi_ssp_event(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_DEV_HANDLE_ARRIV:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_DEV_HANDLE_ARRIV\n"));
+               /*This is for target*/
+               break;
+       case OPC_OUB_SSP_RECV_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SSP_RECV_EVENT\n"));
+               /*This is for target*/
+               break;
+       case OPC_OUB_DEV_INFO:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_DEV_INFO\n"));
+               break;
+       case OPC_OUB_FW_FLASH_UPDATE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_FW_FLASH_UPDATE\n"));
+               mpi_fw_flash_update_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_GPIO_RESPONSE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GPIO_RESPONSE\n"));
+               break;
+       case OPC_OUB_GPIO_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GPIO_EVENT\n"));
+               break;
+       case OPC_OUB_GENERAL_EVENT:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GENERAL_EVENT\n"));
+               mpi_general_event(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SSP_ABORT_RSP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SSP_ABORT_RSP\n"));
+               mpi_task_abort_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SATA_ABORT_RSP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SATA_ABORT_RSP\n"));
+               mpi_task_abort_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SAS_DIAG_MODE_START_END:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SAS_DIAG_MODE_START_END\n"));
+               break;
+       case OPC_OUB_SAS_DIAG_EXECUTE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SAS_DIAG_EXECUTE\n"));
+               break;
+       case OPC_OUB_GET_TIME_STAMP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GET_TIME_STAMP\n"));
+               break;
+       case OPC_OUB_SAS_HW_EVENT_ACK:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SAS_HW_EVENT_ACK\n"));
+               break;
+       case OPC_OUB_PORT_CONTROL:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_PORT_CONTROL\n"));
+               break;
+       case OPC_OUB_SMP_ABORT_RSP:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SMP_ABORT_RSP\n"));
+               mpi_task_abort_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_GET_NVMD_DATA:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GET_NVMD_DATA\n"));
+               mpi_get_nvmd_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_SET_NVMD_DATA:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SET_NVMD_DATA\n"));
+               mpi_set_nvmd_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_DEVICE_HANDLE_REMOVAL:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_DEVICE_HANDLE_REMOVAL\n"));
+               break;
+       case OPC_OUB_SET_DEVICE_STATE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SET_DEVICE_STATE\n"));
+               mpi_set_dev_state_resp(pm8001_ha, piomb);
+               break;
+       case OPC_OUB_GET_DEVICE_STATE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_GET_DEVICE_STATE\n"));
+               break;
+       case OPC_OUB_SET_DEV_INFO:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SET_DEV_INFO\n"));
+               break;
+       case OPC_OUB_SAS_RE_INITIALIZE:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("OPC_OUB_SAS_RE_INITIALIZE\n"));
+               break;
+       default:
+               PM8001_MSG_DBG(pm8001_ha,
+                       pm8001_printk("Unknown outbound Queue IOMB OPC = %x\n",
+                       opc));
+               break;
+       }
+}
+
+static int process_oq(struct pm8001_hba_info *pm8001_ha)
+{
+       struct outbound_queue_table *circularQ;
+       void *pMsg1 = NULL;
+       u8 bc = 0;
+       u32 ret = MPI_IO_STATUS_FAIL, processedMsgCount = 0;
+
+       circularQ = &pm8001_ha->outbnd_q_tbl[0];
+       do {
+               ret = mpi_msg_consume(pm8001_ha, circularQ, &pMsg1, &bc);
+               if (MPI_IO_STATUS_SUCCESS == ret) {
+                       /* process the outbound message */
+                       process_one_iomb(pm8001_ha, (void *)((u8 *)pMsg1 - 4));
+                       /* free the message from the outbound circular buffer */
+                       mpi_msg_free_set(pm8001_ha, circularQ, bc);
+                       processedMsgCount++;
+               }
+               if (MPI_IO_STATUS_BUSY == ret) {
+                       u32 producer_idx;
+                       /* Update the producer index from SPC */
+                       producer_idx = pm8001_read_32(circularQ->pi_virt);
+                       circularQ->producer_index = cpu_to_le32(producer_idx);
+                       if (circularQ->producer_index ==
+                               circularQ->consumer_idx)
+                               /* OQ is empty */
+                               break;
+               }
+       } while (100 > processedMsgCount);/*end message processing if hit the
+       count*/
+       return ret;
+}
+
+/* PCI_DMA_... to our direction translation. */
+static const u8 data_dir_flags[] = {
+       [PCI_DMA_BIDIRECTIONAL] = DATA_DIR_BYRECIPIENT,/* UNSPECIFIED */
+       [PCI_DMA_TODEVICE]      = DATA_DIR_OUT,/* OUTBOUND */
+       [PCI_DMA_FROMDEVICE]    = DATA_DIR_IN,/* INBOUND */
+       [PCI_DMA_NONE]          = DATA_DIR_NONE,/* NO TRANSFER */
+};
+static void
+pm8001_chip_make_sg(struct scatterlist *scatter, int nr, void *prd)
+{
+       int i;
+       struct scatterlist *sg;
+       struct pm8001_prd *buf_prd = prd;
+
+       for_each_sg(scatter, sg, nr, i) {
+               buf_prd->addr = cpu_to_le64(sg_dma_address(sg));
+               buf_prd->im_len.len = cpu_to_le32(sg_dma_len(sg));
+               buf_prd->im_len.e = 0;
+               buf_prd++;
+       }
+}
+
+static void build_smp_cmd(u32 deviceID, u32 hTag, struct smp_req *psmp_cmd)
+{
+       psmp_cmd->tag = cpu_to_le32(hTag);
+       psmp_cmd->device_id = cpu_to_le32(deviceID);
+       psmp_cmd->len_ip_ir = cpu_to_le32(1|(1 << 1));
+}
+
+/**
+ * pm8001_chip_smp_req - send a SMP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_smp_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       int elem, rc;
+       struct sas_task *task = ccb->task;
+       struct domain_device *dev = task->dev;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       struct scatterlist *sg_req, *sg_resp;
+       u32 req_len, resp_len;
+       struct smp_req smp_cmd;
+       u32 opc;
+       struct inbound_queue_table *circularQ;
+
+       memset(&smp_cmd, 0, sizeof(smp_cmd));
+       /*
+        * DMA-map SMP request, response buffers
+        */
+       sg_req = &task->smp_task.smp_req;
+       elem = dma_map_sg(pm8001_ha->dev, sg_req, 1, PCI_DMA_TODEVICE);
+       if (!elem)
+               return -ENOMEM;
+       req_len = sg_dma_len(sg_req);
+
+       sg_resp = &task->smp_task.smp_resp;
+       elem = dma_map_sg(pm8001_ha->dev, sg_resp, 1, PCI_DMA_FROMDEVICE);
+       if (!elem) {
+               rc = -ENOMEM;
+               goto err_out;
+       }
+       resp_len = sg_dma_len(sg_resp);
+       /* must be in dwords */
+       if ((req_len & 0x3) || (resp_len & 0x3)) {
+               rc = -EINVAL;
+               goto err_out_2;
+       }
+
+       opc = OPC_INB_SMP_REQUEST;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       smp_cmd.tag = cpu_to_le32(ccb->ccb_tag);
+       smp_cmd.long_smp_req.long_req_addr =
+               cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_req));
+       smp_cmd.long_smp_req.long_req_size =
+               cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_req)-4);
+       smp_cmd.long_smp_req.long_resp_addr =
+               cpu_to_le64((u64)sg_dma_address(&task->smp_task.smp_resp));
+       smp_cmd.long_smp_req.long_resp_size =
+               cpu_to_le32((u32)sg_dma_len(&task->smp_task.smp_resp)-4);
+       build_smp_cmd(pm8001_dev->device_id, smp_cmd.tag, &smp_cmd);
+       mpi_build_cmd(pm8001_ha, circularQ, opc, (u32 *)&smp_cmd);
+       return 0;
+
+err_out_2:
+       dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_resp, 1,
+                       PCI_DMA_FROMDEVICE);
+err_out:
+       dma_unmap_sg(pm8001_ha->dev, &ccb->task->smp_task.smp_req, 1,
+                       PCI_DMA_TODEVICE);
+       return rc;
+}
+
+/**
+ * pm8001_chip_ssp_io_req - send a SSP task to FW
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information this request used.
+ */
+static int pm8001_chip_ssp_io_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       struct sas_task *task = ccb->task;
+       struct domain_device *dev = task->dev;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       struct ssp_ini_io_start_req ssp_cmd;
+       u32 tag = ccb->ccb_tag;
+       __le64 phys_addr;
+       struct inbound_queue_table *circularQ;
+       u32 opc = OPC_INB_SSPINIIOSTART;
+       memset(&ssp_cmd, 0, sizeof(ssp_cmd));
+       memcpy(ssp_cmd.ssp_iu.lun, task->ssp_task.LUN, 8);
+       ssp_cmd.dir_m_tlr = data_dir_flags[task->data_dir] << 8 | 0x0;/*0 for
+       SAS 1.1 compatible TLR*/
+       ssp_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+       ssp_cmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+       ssp_cmd.tag = cpu_to_le32(tag);
+       if (task->ssp_task.enable_first_burst)
+               ssp_cmd.ssp_iu.efb_prio_attr |= 0x80;
+       ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_prio << 3);
+       ssp_cmd.ssp_iu.efb_prio_attr |= (task->ssp_task.task_attr & 7);
+       memcpy(ssp_cmd.ssp_iu.cdb, task->ssp_task.cdb, 16);
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+       /* fill in PRD (scatter/gather) table, if any */
+       if (task->num_scatter > 1) {
+               pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+               phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
+                               offsetof(struct pm8001_ccb_info, buf_prd[0]));
+               ssp_cmd.addr_low = lower_32_bits(phys_addr);
+               ssp_cmd.addr_high = upper_32_bits(phys_addr);
+               ssp_cmd.esgl = cpu_to_le32(1<<31);
+       } else if (task->num_scatter == 1) {
+               __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
+               ssp_cmd.addr_low = lower_32_bits(dma_addr);
+               ssp_cmd.addr_high = upper_32_bits(dma_addr);
+               ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+               ssp_cmd.esgl = 0;
+       } else if (task->num_scatter == 0) {
+               ssp_cmd.addr_low = 0;
+               ssp_cmd.addr_high = 0;
+               ssp_cmd.len = cpu_to_le32(task->total_xfer_len);
+               ssp_cmd.esgl = 0;
+       }
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &ssp_cmd);
+       return 0;
+}
+
+static int pm8001_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       struct sas_task *task = ccb->task;
+       struct domain_device *dev = task->dev;
+       struct pm8001_device *pm8001_ha_dev = dev->lldd_dev;
+       u32 tag = ccb->ccb_tag;
+       struct sata_start_req sata_cmd;
+       u32 hdr_tag, ncg_tag = 0;
+       __le64 phys_addr;
+       u32 ATAP = 0x0;
+       u32 dir;
+       struct inbound_queue_table *circularQ;
+       u32  opc = OPC_INB_SATA_HOST_OPSTART;
+       memset(&sata_cmd, 0, sizeof(sata_cmd));
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       if (task->data_dir == PCI_DMA_NONE) {
+               ATAP = 0x04;  /* no data*/
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("no data \n"));
+       } else if (likely(!task->ata_task.device_control_reg_update)) {
+               if (task->ata_task.dma_xfer) {
+                       ATAP = 0x06; /* DMA */
+                       PM8001_IO_DBG(pm8001_ha, pm8001_printk("DMA \n"));
+               } else {
+                       ATAP = 0x05; /* PIO*/
+                       PM8001_IO_DBG(pm8001_ha, pm8001_printk("PIO \n"));
+               }
+               if (task->ata_task.use_ncq &&
+                       dev->sata_dev.command_set != ATAPI_COMMAND_SET) {
+                       ATAP = 0x07; /* FPDMA */
+                       PM8001_IO_DBG(pm8001_ha, pm8001_printk("FPDMA \n"));
+               }
+       }
+       if (task->ata_task.use_ncq && pm8001_get_ncq_tag(task, &hdr_tag))
+               ncg_tag = cpu_to_le32(hdr_tag);
+       dir = data_dir_flags[task->data_dir] << 8;
+       sata_cmd.tag = cpu_to_le32(tag);
+       sata_cmd.device_id = cpu_to_le32(pm8001_ha_dev->device_id);
+       sata_cmd.data_len = cpu_to_le32(task->total_xfer_len);
+       sata_cmd.ncqtag_atap_dir_m =
+               cpu_to_le32(((ncg_tag & 0xff)<<16)|((ATAP & 0x3f) << 10) | dir);
+       sata_cmd.sata_fis = task->ata_task.fis;
+       if (likely(!task->ata_task.device_control_reg_update))
+               sata_cmd.sata_fis.flags |= 0x80;/* C=1: update ATA cmd reg */
+       sata_cmd.sata_fis.flags &= 0xF0;/* PM_PORT field shall be 0 */
+       /* fill in PRD (scatter/gather) table, if any */
+       if (task->num_scatter > 1) {
+               pm8001_chip_make_sg(task->scatter, ccb->n_elem, ccb->buf_prd);
+               phys_addr = cpu_to_le64(ccb->ccb_dma_handle +
+                               offsetof(struct pm8001_ccb_info, buf_prd[0]));
+               sata_cmd.addr_low = lower_32_bits(phys_addr);
+               sata_cmd.addr_high = upper_32_bits(phys_addr);
+               sata_cmd.esgl = cpu_to_le32(1 << 31);
+       } else if (task->num_scatter == 1) {
+               __le64 dma_addr = cpu_to_le64(sg_dma_address(task->scatter));
+               sata_cmd.addr_low = lower_32_bits(dma_addr);
+               sata_cmd.addr_high = upper_32_bits(dma_addr);
+               sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+               sata_cmd.esgl = 0;
+       } else if (task->num_scatter == 0) {
+               sata_cmd.addr_low = 0;
+               sata_cmd.addr_high = 0;
+               sata_cmd.len = cpu_to_le32(task->total_xfer_len);
+               sata_cmd.esgl = 0;
+       }
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &sata_cmd);
+       return 0;
+}
+
+/**
+ * pm8001_chip_phy_start_req - start phy via PHY_START COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int
+pm8001_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id)
+{
+       struct phy_start_req payload;
+       struct inbound_queue_table *circularQ;
+       u32 tag = 0x01;
+       u32 opcode = OPC_INB_PHYSTART;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memset(&payload, 0, sizeof(payload));
+       payload.tag = cpu_to_le32(tag);
+       /*
+        ** [0:7]   PHY Identifier
+        ** [8:11]  link rate 1.5G, 3G, 6G
+        ** [12:13] link mode 01b SAS mode; 10b SATA mode; 11b both
+        ** [14]    0b disable spin up hold; 1b enable spin up hold
+        */
+       payload.ase_sh_lm_slr_phyid = cpu_to_le32(SPINHOLD_DISABLE |
+               LINKMODE_AUTO | LINKRATE_15 |
+               LINKRATE_30 | LINKRATE_60 | phy_id);
+       payload.sas_identify.dev_type = SAS_END_DEV;
+       payload.sas_identify.initiator_bits = SAS_PROTOCOL_ALL;
+       memcpy(payload.sas_identify.sas_addr,
+               pm8001_ha->sas_addr, SAS_ADDR_SIZE);
+       payload.sas_identify.phy_id = phy_id;
+       mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+       return 0;
+}
+
+/**
+ * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to start up.
+ */
+static int pm8001_chip_phy_stop_req(struct pm8001_hba_info *pm8001_ha,
+       u8 phy_id)
+{
+       struct phy_stop_req payload;
+       struct inbound_queue_table *circularQ;
+       u32 tag = 0x01;
+       u32 opcode = OPC_INB_PHYSTOP;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memset(&payload, 0, sizeof(payload));
+       payload.tag = cpu_to_le32(tag);
+       payload.phy_id = cpu_to_le32(phy_id);
+       mpi_build_cmd(pm8001_ha, circularQ, opcode, &payload);
+       return 0;
+}
+
+/**
+ * see comments on mpi_reg_resp.
+ */
+static int pm8001_chip_reg_dev_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_device *pm8001_dev, u32 flag)
+{
+       struct reg_dev_req payload;
+       u32     opc;
+       u32 stp_sspsmp_sata = 0x4;
+       struct inbound_queue_table *circularQ;
+       u32 linkrate, phy_id;
+       u32 rc, tag = 0xdeadbeef;
+       struct pm8001_ccb_info *ccb;
+       u8 retryFlag = 0x1;
+       u16 firstBurstSize = 0;
+       u16 ITNT = 2000;
+       struct domain_device *dev = pm8001_dev->sas_device;
+       struct domain_device *parent_dev = dev->parent;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+
+       memset(&payload, 0, sizeof(payload));
+       rc = pm8001_tag_alloc(pm8001_ha, &tag);
+       if (rc)
+               return rc;
+       ccb = &pm8001_ha->ccb_info[tag];
+       ccb->device = pm8001_dev;
+       ccb->ccb_tag = tag;
+       payload.tag = cpu_to_le32(tag);
+       if (flag == 1)
+               stp_sspsmp_sata = 0x02; /*direct attached sata */
+       else {
+               if (pm8001_dev->dev_type == SATA_DEV)
+                       stp_sspsmp_sata = 0x00; /* stp*/
+               else if (pm8001_dev->dev_type == SAS_END_DEV ||
+                       pm8001_dev->dev_type == EDGE_DEV ||
+                       pm8001_dev->dev_type == FANOUT_DEV)
+                       stp_sspsmp_sata = 0x01; /*ssp or smp*/
+       }
+       if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type))
+               phy_id = parent_dev->ex_dev.ex_phy->phy_id;
+       else
+               phy_id = pm8001_dev->attached_phy;
+       opc = OPC_INB_REG_DEV;
+       linkrate = (pm8001_dev->sas_device->linkrate < dev->port->linkrate) ?
+                       pm8001_dev->sas_device->linkrate : dev->port->linkrate;
+       payload.phyid_portid =
+               cpu_to_le32(((pm8001_dev->sas_device->port->id) & 0x0F) |
+               ((phy_id & 0x0F) << 4));
+       payload.dtype_dlr_retry = cpu_to_le32((retryFlag & 0x01) |
+               ((linkrate & 0x0F) * 0x1000000) |
+               ((stp_sspsmp_sata & 0x03) * 0x10000000));
+       payload.firstburstsize_ITNexustimeout =
+               cpu_to_le32(ITNT | (firstBurstSize * 0x10000));
+       memcpy(&payload.sas_addr_hi, pm8001_dev->sas_device->sas_addr,
+               SAS_ADDR_SIZE);
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+       return 0;
+}
+
+/**
+ * see comments on mpi_reg_resp.
+ */
+static int pm8001_chip_dereg_dev_req(struct pm8001_hba_info *pm8001_ha,
+       u32 device_id)
+{
+       struct dereg_dev_req payload;
+       u32 opc = OPC_INB_DEREG_DEV_HANDLE;
+       struct inbound_queue_table *circularQ;
+
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memset((u8 *)&payload, 0, sizeof(payload));
+       payload.tag = 1;
+       payload.device_id = cpu_to_le32(device_id);
+       PM8001_MSG_DBG(pm8001_ha,
+               pm8001_printk("unregister device device_id = %d\n", device_id));
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+       return 0;
+}
+
+/**
+ * pm8001_chip_phy_ctl_req - support the local phy operation
+ * @pm8001_ha: our hba card information.
+ * @num: the inbound queue number
+ * @phy_id: the phy id which we wanted to operate
+ * @phy_op:
+ */
+static int pm8001_chip_phy_ctl_req(struct pm8001_hba_info *pm8001_ha,
+       u32 phyId, u32 phy_op)
+{
+       struct local_phy_ctl_req payload;
+       struct inbound_queue_table *circularQ;
+       u32 opc = OPC_INB_LOCAL_PHY_CONTROL;
+       memset((u8 *)&payload, 0, sizeof(payload));
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       payload.tag = 1;
+       payload.phyop_phyid =
+               cpu_to_le32(((phy_op & 0xff) << 8) | (phyId & 0x0F));
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+       return 0;
+}
+
+static u32 pm8001_chip_is_our_interupt(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 value;
+#ifdef PM8001_USE_MSIX
+       return 1;
+#endif
+       value = pm8001_cr32(pm8001_ha, 0, MSGU_ODR);
+       if (value)
+               return 1;
+       return 0;
+
+}
+
+/**
+ * pm8001_chip_isr - PM8001 isr handler.
+ * @pm8001_ha: our hba card information.
+ * @irq: irq number.
+ * @stat: stat.
+ */
+static void
+pm8001_chip_isr(struct pm8001_hba_info *pm8001_ha)
+{
+       pm8001_chip_interrupt_disable(pm8001_ha);
+       process_oq(pm8001_ha);
+       pm8001_chip_interrupt_enable(pm8001_ha);
+}
+
+static int send_task_abort(struct pm8001_hba_info *pm8001_ha, u32 opc,
+       u32 dev_id, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+       struct task_abort_req task_abort;
+       struct inbound_queue_table *circularQ;
+
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memset(&task_abort, 0, sizeof(task_abort));
+       if (ABORT_SINGLE == (flag & ABORT_MASK)) {
+               task_abort.abort_all = 0;
+               task_abort.device_id = cpu_to_le32(dev_id);
+               task_abort.tag_to_abort = cpu_to_le32(task_tag);
+               task_abort.tag = cpu_to_le32(cmd_tag);
+       } else if (ABORT_ALL == (flag & ABORT_MASK)) {
+               task_abort.abort_all = cpu_to_le32(1);
+               task_abort.device_id = cpu_to_le32(dev_id);
+               task_abort.tag = cpu_to_le32(cmd_tag);
+       }
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &task_abort);
+       return 0;
+}
+
+/**
+ * pm8001_chip_abort_task - SAS abort task when error or exception happened.
+ * @task: the task we wanted to aborted.
+ * @flag: the abort flag.
+ */
+static int pm8001_chip_abort_task(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag, u32 cmd_tag)
+{
+       u32 opc, device_id;
+       int rc = TMF_RESP_FUNC_FAILED;
+       PM8001_IO_DBG(pm8001_ha, pm8001_printk("Abort tag[%x]", task_tag));
+       if (pm8001_dev->dev_type == SAS_END_DEV)
+               opc = OPC_INB_SSP_ABORT;
+       else if (pm8001_dev->dev_type == SATA_DEV)
+               opc = OPC_INB_SATA_ABORT;
+       else
+               opc = OPC_INB_SMP_ABORT;/* SMP */
+       device_id = pm8001_dev->device_id;
+       rc = send_task_abort(pm8001_ha, opc, device_id, flag,
+               task_tag, cmd_tag);
+       if (rc != TMF_RESP_FUNC_COMPLETE)
+               PM8001_IO_DBG(pm8001_ha, pm8001_printk("rc= %d\n", rc));
+       return rc;
+}
+
+/**
+ * pm8001_chip_ssp_tm_req - built the task managment command.
+ * @pm8001_ha: our hba card information.
+ * @ccb: the ccb information.
+ * @tmf: task management function.
+ */
+static int pm8001_chip_ssp_tm_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+       struct sas_task *task = ccb->task;
+       struct domain_device *dev = task->dev;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       u32 opc = OPC_INB_SSPINITMSTART;
+       struct inbound_queue_table *circularQ;
+       struct ssp_ini_tm_start_req sspTMCmd;
+
+       memset(&sspTMCmd, 0, sizeof(sspTMCmd));
+       sspTMCmd.device_id = cpu_to_le32(pm8001_dev->device_id);
+       sspTMCmd.relate_tag = cpu_to_le32(tmf->tag_of_task_to_be_managed);
+       sspTMCmd.tmf = cpu_to_le32(tmf->tmf);
+       sspTMCmd.ds_ads_m = cpu_to_le32(1 << 2);
+       memcpy(sspTMCmd.lun, task->ssp_task.LUN, 8);
+       sspTMCmd.tag = cpu_to_le32(ccb->ccb_tag);
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &sspTMCmd);
+       return 0;
+}
+
+static int pm8001_chip_get_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+       void *payload)
+{
+       u32 opc = OPC_INB_GET_NVMD_DATA;
+       u32 nvmd_type;
+       u32 rc;
+       u32 tag;
+       struct pm8001_ccb_info *ccb;
+       struct inbound_queue_table *circularQ;
+       struct get_nvm_data_req nvmd_req;
+       struct fw_control_ex *fw_control_context;
+       struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+       nvmd_type = ioctl_payload->minor_function;
+       fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+       fw_control_context->usrAddr = (u8 *)&ioctl_payload->func_specific[0];
+       fw_control_context->len = ioctl_payload->length;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memset(&nvmd_req, 0, sizeof(nvmd_req));
+       rc = pm8001_tag_alloc(pm8001_ha, &tag);
+       if (rc)
+               return rc;
+       ccb = &pm8001_ha->ccb_info[tag];
+       ccb->ccb_tag = tag;
+       ccb->fw_control_context = fw_control_context;
+       nvmd_req.tag = cpu_to_le32(tag);
+
+       switch (nvmd_type) {
+       case TWI_DEVICE: {
+               u32 twi_addr, twi_page_size;
+               twi_addr = 0xa8;
+               twi_page_size = 2;
+
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+                       twi_page_size << 8 | TWI_DEVICE);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       }
+       case C_SEEPROM: {
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       }
+       case VPD_FLASH: {
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       }
+       case EXPAN_ROM: {
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       }
+       default:
+               break;
+       }
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+       return 0;
+}
+
+static int pm8001_chip_set_nvmd_req(struct pm8001_hba_info *pm8001_ha,
+       void *payload)
+{
+       u32 opc = OPC_INB_SET_NVMD_DATA;
+       u32 nvmd_type;
+       u32 rc;
+       u32 tag;
+       struct pm8001_ccb_info *ccb;
+       struct inbound_queue_table *circularQ;
+       struct set_nvm_data_req nvmd_req;
+       struct fw_control_ex *fw_control_context;
+       struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+       nvmd_type = ioctl_payload->minor_function;
+       fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       memcpy(pm8001_ha->memoryMap.region[NVMD].virt_ptr,
+               ioctl_payload->func_specific,
+               ioctl_payload->length);
+       memset(&nvmd_req, 0, sizeof(nvmd_req));
+       rc = pm8001_tag_alloc(pm8001_ha, &tag);
+       if (rc)
+               return rc;
+       ccb = &pm8001_ha->ccb_info[tag];
+       ccb->fw_control_context = fw_control_context;
+       ccb->ccb_tag = tag;
+       nvmd_req.tag = cpu_to_le32(tag);
+       switch (nvmd_type) {
+       case TWI_DEVICE: {
+               u32 twi_addr, twi_page_size;
+               twi_addr = 0xa8;
+               twi_page_size = 2;
+               nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | twi_addr << 16 |
+                       twi_page_size << 8 | TWI_DEVICE);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       }
+       case C_SEEPROM:
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | C_SEEPROM);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       case VPD_FLASH:
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | VPD_FLASH);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       case EXPAN_ROM:
+               nvmd_req.len_ir_vpdd = cpu_to_le32(IPMode | EXPAN_ROM);
+               nvmd_req.resp_len = cpu_to_le32(ioctl_payload->length);
+               nvmd_req.reserved[0] = cpu_to_le32(0xFEDCBA98);
+               nvmd_req.resp_addr_hi =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_hi);
+               nvmd_req.resp_addr_lo =
+                   cpu_to_le32(pm8001_ha->memoryMap.region[NVMD].phys_addr_lo);
+               break;
+       default:
+               break;
+       }
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &nvmd_req);
+       return 0;
+}
+
+/**
+ * pm8001_chip_fw_flash_update_build - support the firmware update operation
+ * @pm8001_ha: our hba card information.
+ * @fw_flash_updata_info: firmware flash update param
+ */
+static int
+pm8001_chip_fw_flash_update_build(struct pm8001_hba_info *pm8001_ha,
+       void *fw_flash_updata_info, u32 tag)
+{
+       struct fw_flash_Update_req payload;
+       struct fw_flash_updata_info *info;
+       struct inbound_queue_table *circularQ;
+       u32 opc = OPC_INB_FW_FLASH_UPDATE;
+
+       memset((u8 *)&payload, 0, sizeof(struct fw_flash_Update_req));
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       info = fw_flash_updata_info;
+       payload.tag = cpu_to_le32(tag);
+       payload.cur_image_len = cpu_to_le32(info->cur_image_len);
+       payload.cur_image_offset = cpu_to_le32(info->cur_image_offset);
+       payload.total_image_len = cpu_to_le32(info->total_image_len);
+       payload.len = info->sgl.im_len.len ;
+       payload.sgl_addr_lo = lower_32_bits(info->sgl.addr);
+       payload.sgl_addr_hi = upper_32_bits(info->sgl.addr);
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+       return 0;
+}
+
+static int
+pm8001_chip_fw_flash_update_req(struct pm8001_hba_info *pm8001_ha,
+       void *payload)
+{
+       struct fw_flash_updata_info flash_update_info;
+       struct fw_control_info *fw_control;
+       struct fw_control_ex *fw_control_context;
+       u32 rc;
+       u32 tag;
+       struct pm8001_ccb_info *ccb;
+       void *buffer = NULL;
+       dma_addr_t phys_addr;
+       u32 phys_addr_hi;
+       u32 phys_addr_lo;
+       struct pm8001_ioctl_payload *ioctl_payload = payload;
+
+       fw_control_context = kzalloc(sizeof(struct fw_control_ex), GFP_KERNEL);
+       fw_control = (struct fw_control_info *)&ioctl_payload->func_specific[0];
+       if (fw_control->len != 0) {
+               if (pm8001_mem_alloc(pm8001_ha->pdev,
+                       (void **)&buffer,
+                       &phys_addr,
+                       &phys_addr_hi,
+                       &phys_addr_lo,
+                       fw_control->len, 0) != 0) {
+                               PM8001_FAIL_DBG(pm8001_ha,
+                                       pm8001_printk("Mem alloc failure\n"));
+                               return -ENOMEM;
+               }
+       }
+       memset((void *)buffer, 0, fw_control->len);
+       memcpy((void *)buffer, fw_control->buffer, fw_control->len);
+       flash_update_info.sgl.addr = cpu_to_le64(phys_addr);
+       flash_update_info.sgl.im_len.len = cpu_to_le32(fw_control->len);
+       flash_update_info.sgl.im_len.e = 0;
+       flash_update_info.cur_image_offset = fw_control->offset;
+       flash_update_info.cur_image_len = fw_control->len;
+       flash_update_info.total_image_len = fw_control->size;
+       fw_control_context->fw_control = fw_control;
+       fw_control_context->virtAddr = buffer;
+       fw_control_context->len = fw_control->len;
+       rc = pm8001_tag_alloc(pm8001_ha, &tag);
+       if (rc)
+               return rc;
+       ccb = &pm8001_ha->ccb_info[tag];
+       ccb->fw_control_context = fw_control_context;
+       ccb->ccb_tag = tag;
+       pm8001_chip_fw_flash_update_build(pm8001_ha, &flash_update_info, tag);
+       return 0;
+}
+
+static int
+pm8001_chip_set_dev_state_req(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_device *pm8001_dev, u32 state)
+{
+       struct set_dev_state_req payload;
+       struct inbound_queue_table *circularQ;
+       struct pm8001_ccb_info *ccb;
+       u32 rc;
+       u32 tag;
+       u32 opc = OPC_INB_SET_DEVICE_STATE;
+       memset((u8 *)&payload, 0, sizeof(payload));
+       rc = pm8001_tag_alloc(pm8001_ha, &tag);
+       if (rc)
+               return -1;
+       ccb = &pm8001_ha->ccb_info[tag];
+       ccb->ccb_tag = tag;
+       ccb->device = pm8001_dev;
+       circularQ = &pm8001_ha->inbnd_q_tbl[0];
+       payload.tag = cpu_to_le32(tag);
+       payload.device_id = cpu_to_le32(pm8001_dev->device_id);
+       payload.nds = cpu_to_le32(state);
+       mpi_build_cmd(pm8001_ha, circularQ, opc, &payload);
+       return 0;
+
+}
+
+const struct pm8001_dispatch pm8001_8001_dispatch = {
+       .name                   = "pmc8001",
+       .chip_init              = pm8001_chip_init,
+       .chip_soft_rst          = pm8001_chip_soft_rst,
+       .chip_rst               = pm8001_hw_chip_rst,
+       .chip_iounmap           = pm8001_chip_iounmap,
+       .isr                    = pm8001_chip_isr,
+       .is_our_interupt        = pm8001_chip_is_our_interupt,
+       .isr_process_oq         = process_oq,
+       .interrupt_enable       = pm8001_chip_interrupt_enable,
+       .interrupt_disable      = pm8001_chip_interrupt_disable,
+       .make_prd               = pm8001_chip_make_sg,
+       .smp_req                = pm8001_chip_smp_req,
+       .ssp_io_req             = pm8001_chip_ssp_io_req,
+       .sata_req               = pm8001_chip_sata_req,
+       .phy_start_req          = pm8001_chip_phy_start_req,
+       .phy_stop_req           = pm8001_chip_phy_stop_req,
+       .reg_dev_req            = pm8001_chip_reg_dev_req,
+       .dereg_dev_req          = pm8001_chip_dereg_dev_req,
+       .phy_ctl_req            = pm8001_chip_phy_ctl_req,
+       .task_abort             = pm8001_chip_abort_task,
+       .ssp_tm_req             = pm8001_chip_ssp_tm_req,
+       .get_nvmd_req           = pm8001_chip_get_nvmd_req,
+       .set_nvmd_req           = pm8001_chip_set_nvmd_req,
+       .fw_flash_update_req    = pm8001_chip_fw_flash_update_req,
+       .set_dev_state_req      = pm8001_chip_set_dev_state_req,
+};
+
diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
new file mode 100644 (file)
index 0000000..3690a2b
--- /dev/null
@@ -0,0 +1,1011 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+#ifndef _PMC8001_REG_H_
+#define _PMC8001_REG_H_
+
+#include <linux/types.h>
+#include <scsi/libsas.h>
+
+
+/* for Request Opcode of IOMB */
+#define OPC_INB_ECHO                           1       /* 0x000 */
+#define OPC_INB_PHYSTART                       4       /* 0x004 */
+#define OPC_INB_PHYSTOP                                5       /* 0x005 */
+#define OPC_INB_SSPINIIOSTART                  6       /* 0x006 */
+#define OPC_INB_SSPINITMSTART                  7       /* 0x007 */
+#define OPC_INB_SSPINIEXTIOSTART               8       /* 0x008 */
+#define OPC_INB_DEV_HANDLE_ACCEPT              9       /* 0x009 */
+#define OPC_INB_SSPTGTIOSTART                  10      /* 0x00A */
+#define OPC_INB_SSPTGTRSPSTART                 11      /* 0x00B */
+#define OPC_INB_SSPINIEDCIOSTART               12      /* 0x00C */
+#define OPC_INB_SSPINIEXTEDCIOSTART            13      /* 0x00D */
+#define OPC_INB_SSPTGTEDCIOSTART               14      /* 0x00E */
+#define OPC_INB_SSP_ABORT                      15      /* 0x00F */
+#define OPC_INB_DEREG_DEV_HANDLE               16      /* 0x010 */
+#define OPC_INB_GET_DEV_HANDLE                 17      /* 0x011 */
+#define OPC_INB_SMP_REQUEST                    18      /* 0x012 */
+/* SMP_RESPONSE is removed */
+#define OPC_INB_SMP_RESPONSE                   19      /* 0x013 */
+#define OPC_INB_SMP_ABORT                      20      /* 0x014 */
+#define OPC_INB_REG_DEV                                22      /* 0x016 */
+#define OPC_INB_SATA_HOST_OPSTART              23      /* 0x017 */
+#define OPC_INB_SATA_ABORT                     24      /* 0x018 */
+#define OPC_INB_LOCAL_PHY_CONTROL              25      /* 0x019 */
+#define OPC_INB_GET_DEV_INFO                   26      /* 0x01A */
+#define OPC_INB_FW_FLASH_UPDATE                        32      /* 0x020 */
+#define OPC_INB_GPIO                           34      /* 0x022 */
+#define OPC_INB_SAS_DIAG_MODE_START_END                35      /* 0x023 */
+#define OPC_INB_SAS_DIAG_EXECUTE               36      /* 0x024 */
+#define OPC_INB_SAS_HW_EVENT_ACK               37      /* 0x025 */
+#define OPC_INB_GET_TIME_STAMP                 38      /* 0x026 */
+#define OPC_INB_PORT_CONTROL                   39      /* 0x027 */
+#define OPC_INB_GET_NVMD_DATA                  40      /* 0x028 */
+#define OPC_INB_SET_NVMD_DATA                  41      /* 0x029 */
+#define OPC_INB_SET_DEVICE_STATE               42      /* 0x02A */
+#define OPC_INB_GET_DEVICE_STATE               43      /* 0x02B */
+#define OPC_INB_SET_DEV_INFO                   44      /* 0x02C */
+#define OPC_INB_SAS_RE_INITIALIZE              45      /* 0x02D */
+
+/* for Response Opcode of IOMB */
+#define OPC_OUB_ECHO                           1       /* 0x001 */
+#define OPC_OUB_HW_EVENT                       4       /* 0x004 */
+#define OPC_OUB_SSP_COMP                       5       /* 0x005 */
+#define OPC_OUB_SMP_COMP                       6       /* 0x006 */
+#define OPC_OUB_LOCAL_PHY_CNTRL                        7       /* 0x007 */
+#define OPC_OUB_DEV_REGIST                     10      /* 0x00A */
+#define OPC_OUB_DEREG_DEV                      11      /* 0x00B */
+#define OPC_OUB_GET_DEV_HANDLE                 12      /* 0x00C */
+#define OPC_OUB_SATA_COMP                      13      /* 0x00D */
+#define OPC_OUB_SATA_EVENT                     14      /* 0x00E */
+#define OPC_OUB_SSP_EVENT                      15      /* 0x00F */
+#define OPC_OUB_DEV_HANDLE_ARRIV               16      /* 0x010 */
+/* SMP_RECEIVED Notification is removed */
+#define OPC_OUB_SMP_RECV_EVENT                 17      /* 0x011 */
+#define OPC_OUB_SSP_RECV_EVENT                 18      /* 0x012 */
+#define OPC_OUB_DEV_INFO                       19      /* 0x013 */
+#define OPC_OUB_FW_FLASH_UPDATE                        20      /* 0x014 */
+#define OPC_OUB_GPIO_RESPONSE                  22      /* 0x016 */
+#define OPC_OUB_GPIO_EVENT                     23      /* 0x017 */
+#define OPC_OUB_GENERAL_EVENT                  24      /* 0x018 */
+#define OPC_OUB_SSP_ABORT_RSP                  26      /* 0x01A */
+#define OPC_OUB_SATA_ABORT_RSP                 27      /* 0x01B */
+#define OPC_OUB_SAS_DIAG_MODE_START_END                28      /* 0x01C */
+#define OPC_OUB_SAS_DIAG_EXECUTE               29      /* 0x01D */
+#define OPC_OUB_GET_TIME_STAMP                 30      /* 0x01E */
+#define OPC_OUB_SAS_HW_EVENT_ACK               31      /* 0x01F */
+#define OPC_OUB_PORT_CONTROL                   32      /* 0x020 */
+#define OPC_OUB_SKIP_ENTRY                     33      /* 0x021 */
+#define OPC_OUB_SMP_ABORT_RSP                  34      /* 0x022 */
+#define OPC_OUB_GET_NVMD_DATA                  35      /* 0x023 */
+#define OPC_OUB_SET_NVMD_DATA                  36      /* 0x024 */
+#define OPC_OUB_DEVICE_HANDLE_REMOVAL          37      /* 0x025 */
+#define OPC_OUB_SET_DEVICE_STATE               38      /* 0x026 */
+#define OPC_OUB_GET_DEVICE_STATE               39      /* 0x027 */
+#define OPC_OUB_SET_DEV_INFO                   40      /* 0x028 */
+#define OPC_OUB_SAS_RE_INITIALIZE              41      /* 0x029 */
+
+/* for phy start*/
+#define SPINHOLD_DISABLE               (0x00 << 14)
+#define SPINHOLD_ENABLE                        (0x01 << 14)
+#define LINKMODE_SAS                   (0x01 << 12)
+#define LINKMODE_DSATA                 (0x02 << 12)
+#define LINKMODE_AUTO                  (0x03 << 12)
+#define LINKRATE_15                    (0x01 << 8)
+#define LINKRATE_30                    (0x02 << 8)
+#define LINKRATE_60                    (0x04 << 8)
+
+struct mpi_msg_hdr{
+       __le32  header; /* Bits [11:0]  - Message operation code */
+       /* Bits [15:12] - Message Category */
+       /* Bits [21:16] - Outboundqueue ID for the
+       operation completion message */
+       /* Bits [23:22] - Reserved */
+       /* Bits [28:24] - Buffer Count, indicates how
+       many buffer are allocated for the massage */
+       /* Bits [30:29] - Reserved */
+       /* Bits [31] - Message Valid bit */
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to describe enable the phy (64 bytes)
+ */
+struct phy_start_req {
+       __le32  tag;
+       __le32  ase_sh_lm_slr_phyid;
+       struct sas_identify_frame sas_identify;
+       u32     reserved[5];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of PHY Start Command
+ * use to disable the phy (64 bytes)
+ */
+struct phy_stop_req {
+       __le32  tag;
+       __le32  phy_id;
+       u32     reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/* set device bits fis - device to host */
+struct  set_dev_bits_fis {
+       u8      fis_type;       /* 0xA1*/
+       u8      n_i_pmport;
+       /* b7 : n Bit. Notification bit. If set device needs attention. */
+       /* b6 : i Bit. Interrupt Bit */
+       /* b5-b4: reserved2 */
+       /* b3-b0: PM Port */
+       u8      status;
+       u8      error;
+       u32     _r_a;
+} __attribute__ ((packed));
+/* PIO setup FIS - device to host */
+struct  pio_setup_fis {
+       u8      fis_type;       /* 0x5f */
+       u8      i_d_pmPort;
+       /* b7 : reserved */
+       /* b6 : i bit. Interrupt bit */
+       /* b5 : d bit. data transfer direction. set to 1 for device to host
+       xfer */
+       /* b4 : reserved */
+       /* b3-b0: PM Port */
+       u8      status;
+       u8      error;
+       u8      lbal;
+       u8      lbam;
+       u8      lbah;
+       u8      device;
+       u8      lbal_exp;
+       u8      lbam_exp;
+       u8      lbah_exp;
+       u8      _r_a;
+       u8      sector_count;
+       u8      sector_count_exp;
+       u8      _r_b;
+       u8      e_status;
+       u8      _r_c[2];
+       u8      transfer_count;
+} __attribute__ ((packed));
+
+/*
+ * brief the data structure of SATA Completion Response
+ * use to discribe the sata task response (64 bytes)
+ */
+struct sata_completion_resp {
+       __le32  tag;
+       __le32  status;
+       __le32  param;
+       u32     sata_resp[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SAS HW Event Notification
+ * use to alert the host about the hardware event(64 bytes)
+ */
+struct hw_event_resp {
+       __le32  lr_evt_status_phyid_portid;
+       __le32  evt_param;
+       __le32  npip_portstate;
+       struct sas_identify_frame       sas_identify;
+       struct dev_to_host_fis  sata_fis;
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of  REGISTER DEVICE Command
+ * use to describe MPI REGISTER DEVICE Command (64 bytes)
+ */
+
+struct reg_dev_req {
+       __le32  tag;
+       __le32  phyid_portid;
+       __le32  dtype_dlr_retry;
+       __le32  firstburstsize_ITNexustimeout;
+       u32     sas_addr_hi;
+       u32     sas_addr_low;
+       __le32  upper_device_id;
+       u32     reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of  DEREGISTER DEVICE Command
+ * use to request spc to remove all internal resources associated
+ * with the device id (64 bytes)
+ */
+
+struct dereg_dev_req {
+       __le32  tag;
+       __le32  device_id;
+       u32     reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of DEVICE_REGISTRATION Response
+ * use to notify the completion of the device registration  (64 bytes)
+ */
+
+struct dev_reg_resp {
+       __le32  tag;
+       __le32  status;
+       __le32  device_id;
+       u32     reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of Local PHY Control Command
+ * use to issue PHY CONTROL to local phy (64 bytes)
+ */
+struct local_phy_ctl_req {
+       __le32  tag;
+       __le32  phyop_phyid;
+       u32     reserved1[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Local Phy Control Response
+ * use to describe MPI Local Phy Control Response (64 bytes)
+ */
+struct local_phy_ctl_resp {
+       __le32  tag;
+       __le32  phyop_phyid;
+       __le32  status;
+       u32     reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+#define OP_BITS 0x0000FF00
+#define ID_BITS 0x0000000F
+
+/*
+ * brief the data structure of PORT Control Command
+ * use to control port properties (64 bytes)
+ */
+
+struct port_ctl_req {
+       __le32  tag;
+       __le32  portop_portid;
+       __le32  param0;
+       __le32  param1;
+       u32     reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of HW Event Ack Command
+ * use to acknowledge receive HW event (64 bytes)
+ */
+
+struct hw_event_ack_req {
+       __le32  tag;
+       __le32  sea_phyid_portid;
+       __le32  param0;
+       __le32  param1;
+       u32     reserved1[11];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SSP Completion Response
+ * use to indicate a SSP Completion  (n bytes)
+ */
+struct ssp_completion_resp {
+       __le32  tag;
+       __le32  status;
+       __le32  param;
+       __le32  ssptag_rescv_rescpad;
+       struct ssp_response_iu  ssp_resp_iu;
+       __le32  residual_count;
+} __attribute__((packed, aligned(4)));
+
+
+#define SSP_RESCV_BIT  0x00010000
+
+/*
+ * brief the data structure of SATA EVNET esponse
+ * use to indicate a SATA Completion  (64 bytes)
+ */
+
+struct sata_event_resp {
+       __le32  tag;
+       __le32  event;
+       __le32  port_id;
+       __le32  device_id;
+       u32     reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/*
+ * brief the data structure of SSP EVNET esponse
+ * use to indicate a SSP Completion  (64 bytes)
+ */
+
+struct ssp_event_resp {
+       __le32  tag;
+       __le32  event;
+       __le32  port_id;
+       __le32  device_id;
+       u32     reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of General Event Notification Response
+ * use to describe MPI General Event Notification Response (64 bytes)
+ */
+struct general_event_resp {
+       __le32  status;
+       __le32  inb_IOMB_payload[14];
+} __attribute__((packed, aligned(4)));
+
+
+#define GENERAL_EVENT_PAYLOAD  14
+#define OPCODE_BITS    0x00000fff
+
+/*
+ * brief the data structure of SMP Request Command
+ * use to describe MPI SMP REQUEST Command (64 bytes)
+ */
+struct smp_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  len_ip_ir;
+       /* Bits [0]  - Indirect response */
+       /* Bits [1] - Indirect Payload */
+       /* Bits [15:2] - Reserved */
+       /* Bits [23:16] - direct payload Len */
+       /* Bits [31:24] - Reserved */
+       u8      smp_req16[16];
+       union {
+               u8      smp_req[32];
+               struct {
+                       __le64 long_req_addr;/* sg dma address, LE */
+                       __le32 long_req_size;/* LE */
+                       u32     _r_a;
+                       __le64 long_resp_addr;/* sg dma address, LE */
+                       __le32 long_resp_size;/* LE */
+                       u32     _r_b;
+                       } long_smp_req;/* sequencer extension */
+       };
+} __attribute__((packed, aligned(4)));
+/*
+ * brief the data structure of SMP Completion Response
+ * use to describe MPI SMP Completion Response (64 bytes)
+ */
+struct smp_completion_resp {
+       __le32  tag;
+       __le32  status;
+       __le32  param;
+       __le32  _r_a[12];
+} __attribute__((packed, aligned(4)));
+
+/*
+ *brief the data structure of SSP SMP SATA Abort Command
+ * use to describe MPI SSP SMP & SATA Abort Command (64 bytes)
+ */
+struct task_abort_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  tag_to_abort;
+       __le32  abort_all;
+       u32     reserved[11];
+} __attribute__((packed, aligned(4)));
+
+/* These flags used for SSP SMP & SATA Abort */
+#define ABORT_MASK             0x3
+#define ABORT_SINGLE           0x0
+#define ABORT_ALL              0x1
+
+/**
+ * brief the data structure of SSP SATA SMP Abort Response
+ * use to describe SSP SMP & SATA Abort Response ( 64 bytes)
+ */
+struct task_abort_resp {
+       __le32  tag;
+       __le32  status;
+       __le32  scp;
+       u32     reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Command
+ * use to describe MPI SAS Diagnostic Start/End Command (64 bytes)
+ */
+struct sas_diag_start_end_req {
+       __le32  tag;
+       __le32  operation_phyid;
+       u32     reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Command
+ * use to describe MPI SAS Diagnostic Execute Command (64 bytes)
+ */
+struct sas_diag_execute_req{
+       __le32  tag;
+       __le32  cmdtype_cmddesc_phyid;
+       __le32  pat1_pat2;
+       __le32  threshold;
+       __le32  codepat_errmsk;
+       __le32  pmon;
+       __le32  pERF1CTL;
+       u32     reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+#define SAS_DIAG_PARAM_BYTES 24
+
+/*
+ * brief the data structure of Set Device State Command
+ * use to describe MPI Set Device State Command (64 bytes)
+ */
+struct set_dev_state_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  nds;
+       u32     reserved[12];
+} __attribute__((packed, aligned(4)));
+
+
+/*
+ * brief the data structure of SATA Start Command
+ * use to describe MPI SATA IO Start Command (64 bytes)
+ */
+
+struct sata_start_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  data_len;
+       __le32  ncqtag_atap_dir_m;
+       struct host_to_dev_fis  sata_fis;
+       u32     reserved1;
+       u32     reserved2;
+       u32     addr_low;
+       u32     addr_high;
+       __le32  len;
+       __le32  esgl;
+} __attribute__((packed, aligned(4)));
+
+/**
+ * brief the data structure of SSP INI TM Start Command
+ * use to describe MPI SSP INI TM Start Command (64 bytes)
+ */
+struct ssp_ini_tm_start_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  relate_tag;
+       __le32  tmf;
+       u8      lun[8];
+       __le32  ds_ads_m;
+       u32     reserved[8];
+} __attribute__((packed, aligned(4)));
+
+
+struct ssp_info_unit {
+       u8      lun[8];/* SCSI Logical Unit Number */
+       u8      reserved1;/* reserved */
+       u8      efb_prio_attr;
+       /* B7   : enabledFirstBurst */
+       /* B6-3 : taskPriority */
+       /* B2-0 : taskAttribute */
+       u8      reserved2;      /* reserved */
+       u8      additional_cdb_len;
+       /* B7-2 : additional_cdb_len */
+       /* B1-0 : reserved */
+       u8      cdb[16];/* The SCSI CDB up to 16 bytes length */
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SSP INI IO Start Command
+ * use to describe MPI SSP INI IO Start Command (64 bytes)
+ */
+struct ssp_ini_io_start_req {
+       __le32  tag;
+       __le32  device_id;
+       __le32  data_len;
+       __le32  dir_m_tlr;
+       struct ssp_info_unit    ssp_iu;
+       __le32  addr_low;
+       __le32  addr_high;
+       __le32  len;
+       __le32  esgl;
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Firmware download
+ * use to describe MPI FW DOWNLOAD Command (64 bytes)
+ */
+struct fw_flash_Update_req {
+       __le32  tag;
+       __le32  cur_image_offset;
+       __le32  cur_image_len;
+       __le32  total_image_len;
+       u32     reserved0[7];
+       __le32  sgl_addr_lo;
+       __le32  sgl_addr_hi;
+       __le32  len;
+       __le32  ext_reserved;
+} __attribute__((packed, aligned(4)));
+
+
+#define FWFLASH_IOMB_RESERVED_LEN 0x07
+/**
+ * brief the data structure of FW_FLASH_UPDATE Response
+ * use to describe MPI FW_FLASH_UPDATE Response (64 bytes)
+ *
+ */
+struct fw_flash_Update_resp {
+       dma_addr_t      tag;
+       __le32  status;
+       u32     reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Get NVM Data Command
+ * use to get data from NVM in HBA(64 bytes)
+ */
+struct get_nvm_data_req {
+       __le32  tag;
+       __le32  len_ir_vpdd;
+       __le32  vpd_offset;
+       u32     reserved[8];
+       __le32  resp_addr_lo;
+       __le32  resp_addr_hi;
+       __le32  resp_len;
+       u32     reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+struct set_nvm_data_req {
+       __le32  tag;
+       __le32  len_ir_vpdd;
+       __le32  vpd_offset;
+       u32     reserved[8];
+       __le32  resp_addr_lo;
+       __le32  resp_addr_hi;
+       __le32  resp_len;
+       u32     reserved1;
+} __attribute__((packed, aligned(4)));
+
+
+#define TWI_DEVICE     0x0
+#define C_SEEPROM      0x1
+#define VPD_FLASH      0x4
+#define AAP1_RDUMP     0x5
+#define IOP_RDUMP      0x6
+#define EXPAN_ROM      0x7
+
+#define IPMode         0x80000000
+#define NVMD_TYPE      0x0000000F
+#define NVMD_STAT      0x0000FFFF
+#define NVMD_LEN       0xFF000000
+/**
+ * brief the data structure of Get NVMD Data Response
+ * use to describe MPI Get NVMD Data Response (64 bytes)
+ */
+struct get_nvm_data_resp {
+       __le32          tag;
+       __le32          ir_tda_bn_dps_das_nvm;
+       __le32          dlen_status;
+       __le32          nvm_data[12];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Start/End Response
+ * use to describe MPI SAS Diagnostic Start/End Response (64 bytes)
+ *
+ */
+struct sas_diag_start_end_resp {
+       __le32          tag;
+       __le32          status;
+       u32             reserved[13];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of SAS Diagnostic Execute Response
+ * use to describe MPI SAS Diagnostic Execute Response (64 bytes)
+ *
+ */
+struct sas_diag_execute_resp {
+       __le32          tag;
+       __le32          cmdtype_cmddesc_phyid;
+       __le32          Status;
+       __le32          ReportData;
+       u32             reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+/**
+ * brief the data structure of Set Device State Response
+ * use to describe MPI Set Device State Response (64 bytes)
+ *
+ */
+struct set_dev_state_resp {
+       __le32          tag;
+       __le32          status;
+       __le32          device_id;
+       __le32          pds_nds;
+       u32             reserved[11];
+} __attribute__((packed, aligned(4)));
+
+
+#define NDS_BITS 0x0F
+#define PDS_BITS 0xF0
+
+/*
+ * HW Events type
+ */
+
+#define HW_EVENT_RESET_START                   0x01
+#define HW_EVENT_CHIP_RESET_COMPLETE           0x02
+#define HW_EVENT_PHY_STOP_STATUS               0x03
+#define HW_EVENT_SAS_PHY_UP                    0x04
+#define HW_EVENT_SATA_PHY_UP                   0x05
+#define HW_EVENT_SATA_SPINUP_HOLD              0x06
+#define HW_EVENT_PHY_DOWN                      0x07
+#define HW_EVENT_PORT_INVALID                  0x08
+#define HW_EVENT_BROADCAST_CHANGE              0x09
+#define HW_EVENT_PHY_ERROR                     0x0A
+#define HW_EVENT_BROADCAST_SES                 0x0B
+#define HW_EVENT_INBOUND_CRC_ERROR             0x0C
+#define HW_EVENT_HARD_RESET_RECEIVED           0x0D
+#define HW_EVENT_MALFUNCTION                   0x0E
+#define HW_EVENT_ID_FRAME_TIMEOUT              0x0F
+#define HW_EVENT_BROADCAST_EXP                 0x10
+#define HW_EVENT_PHY_START_STATUS              0x11
+#define HW_EVENT_LINK_ERR_INVALID_DWORD                0x12
+#define HW_EVENT_LINK_ERR_DISPARITY_ERROR      0x13
+#define HW_EVENT_LINK_ERR_CODE_VIOLATION       0x14
+#define HW_EVENT_LINK_ERR_LOSS_OF_DWORD_SYNCH  0x15
+#define HW_EVENT_LINK_ERR_PHY_RESET_FAILED     0x16
+#define HW_EVENT_PORT_RECOVERY_TIMER_TMO       0x17
+#define HW_EVENT_PORT_RECOVER                  0x18
+#define HW_EVENT_PORT_RESET_TIMER_TMO          0x19
+#define HW_EVENT_PORT_RESET_COMPLETE           0x20
+#define EVENT_BROADCAST_ASYNCH_EVENT           0x21
+
+/* port state */
+#define PORT_NOT_ESTABLISHED                   0x00
+#define PORT_VALID                             0x01
+#define PORT_LOSTCOMM                          0x02
+#define PORT_IN_RESET                          0x04
+#define PORT_INVALID                           0x08
+
+/*
+ * SSP/SMP/SATA IO Completion Status values
+ */
+
+#define IO_SUCCESS                             0x00
+#define IO_ABORTED                             0x01
+#define IO_OVERFLOW                            0x02
+#define IO_UNDERFLOW                           0x03
+#define IO_FAILED                              0x04
+#define IO_ABORT_RESET                         0x05
+#define IO_NOT_VALID                           0x06
+#define IO_NO_DEVICE                           0x07
+#define IO_ILLEGAL_PARAMETER                   0x08
+#define IO_LINK_FAILURE                                0x09
+#define IO_PROG_ERROR                          0x0A
+#define IO_EDC_IN_ERROR                                0x0B
+#define IO_EDC_OUT_ERROR                       0x0C
+#define IO_ERROR_HW_TIMEOUT                    0x0D
+#define IO_XFER_ERROR_BREAK                    0x0E
+#define IO_XFER_ERROR_PHY_NOT_READY            0x0F
+#define IO_OPEN_CNX_ERROR_PROTOCOL_NOT_SUPPORTED       0x10
+#define IO_OPEN_CNX_ERROR_ZONE_VIOLATION               0x11
+#define IO_OPEN_CNX_ERROR_BREAK                                0x12
+#define IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS                        0x13
+#define IO_OPEN_CNX_ERROR_BAD_DESTINATION              0x14
+#define IO_OPEN_CNX_ERROR_CONNECTION_RATE_NOT_SUPPORTED        0x15
+#define IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY           0x16
+#define IO_OPEN_CNX_ERROR_WRONG_DESTINATION            0x17
+#define IO_OPEN_CNX_ERROR_UNKNOWN_ERROR                        0x18
+#define IO_XFER_ERROR_NAK_RECEIVED                     0x19
+#define IO_XFER_ERROR_ACK_NAK_TIMEOUT                  0x1A
+#define IO_XFER_ERROR_PEER_ABORTED                     0x1B
+#define IO_XFER_ERROR_RX_FRAME                         0x1C
+#define IO_XFER_ERROR_DMA                              0x1D
+#define IO_XFER_ERROR_CREDIT_TIMEOUT                   0x1E
+#define IO_XFER_ERROR_SATA_LINK_TIMEOUT                        0x1F
+#define IO_XFER_ERROR_SATA                             0x20
+#define IO_XFER_ERROR_ABORTED_DUE_TO_SRST              0x22
+#define IO_XFER_ERROR_REJECTED_NCQ_MODE                        0x21
+#define IO_XFER_ERROR_ABORTED_NCQ_MODE                 0x23
+#define IO_XFER_OPEN_RETRY_TIMEOUT                     0x24
+#define IO_XFER_SMP_RESP_CONNECTION_ERROR              0x25
+#define IO_XFER_ERROR_UNEXPECTED_PHASE                 0x26
+#define IO_XFER_ERROR_XFER_RDY_OVERRUN                 0x27
+#define IO_XFER_ERROR_XFER_RDY_NOT_EXPECTED            0x28
+
+#define IO_XFER_ERROR_CMD_ISSUE_ACK_NAK_TIMEOUT                0x30
+#define IO_XFER_ERROR_CMD_ISSUE_BREAK_BEFORE_ACK_NAK   0x31
+#define IO_XFER_ERROR_CMD_ISSUE_PHY_DOWN_BEFORE_ACK_NAK        0x32
+
+#define IO_XFER_ERROR_OFFSET_MISMATCH                  0x34
+#define IO_XFER_ERROR_XFER_ZERO_DATA_LEN               0x35
+#define IO_XFER_CMD_FRAME_ISSUED                       0x36
+#define IO_ERROR_INTERNAL_SMP_RESOURCE                 0x37
+#define IO_PORT_IN_RESET                               0x38
+#define IO_DS_NON_OPERATIONAL                          0x39
+#define IO_DS_IN_RECOVERY                              0x3A
+#define IO_TM_TAG_NOT_FOUND                            0x3B
+#define IO_XFER_PIO_SETUP_ERROR                                0x3C
+#define IO_SSP_EXT_IU_ZERO_LEN_ERROR                   0x3D
+#define IO_DS_IN_ERROR                                 0x3E
+#define IO_OPEN_CNX_ERROR_HW_RESOURCE_BUSY             0x3F
+#define IO_ABORT_IN_PROGRESS                           0x40
+#define IO_ABORT_DELAYED                               0x41
+#define IO_INVALID_LENGTH                              0x42
+
+/* WARNING: This error code must always be the last number.
+ * If you add error code, modify this code also
+ * It is used as an index
+ */
+#define IO_ERROR_UNKNOWN_GENERIC                       0x43
+
+/* MSGU CONFIGURATION  TABLE*/
+
+#define SPC_MSGU_CFG_TABLE_UPDATE              0x01/* Inbound doorbell bit0 */
+#define SPC_MSGU_CFG_TABLE_RESET               0x02/* Inbound doorbell bit1 */
+#define SPC_MSGU_CFG_TABLE_FREEZE              0x04/* Inbound doorbell bit2 */
+#define SPC_MSGU_CFG_TABLE_UNFREEZE            0x08/* Inbound doorbell bit4 */
+#define MSGU_IBDB_SET                          0x04
+#define MSGU_HOST_INT_STATUS                   0x08
+#define MSGU_HOST_INT_MASK                     0x0C
+#define MSGU_IOPIB_INT_STATUS                  0x18
+#define MSGU_IOPIB_INT_MASK                    0x1C
+#define MSGU_IBDB_CLEAR                                0x20/* RevB - Host not use */
+#define MSGU_MSGU_CONTROL                      0x24
+#define MSGU_ODR                               0x3C/* RevB */
+#define MSGU_ODCR                              0x40/* RevB */
+#define MSGU_SCRATCH_PAD_0                     0x44
+#define MSGU_SCRATCH_PAD_1                     0x48
+#define MSGU_SCRATCH_PAD_2                     0x4C
+#define MSGU_SCRATCH_PAD_3                     0x50
+#define MSGU_HOST_SCRATCH_PAD_0                        0x54
+#define MSGU_HOST_SCRATCH_PAD_1                        0x58
+#define MSGU_HOST_SCRATCH_PAD_2                        0x5C
+#define MSGU_HOST_SCRATCH_PAD_3                        0x60
+#define MSGU_HOST_SCRATCH_PAD_4                        0x64
+#define MSGU_HOST_SCRATCH_PAD_5                        0x68
+#define MSGU_HOST_SCRATCH_PAD_6                        0x6C
+#define MSGU_HOST_SCRATCH_PAD_7                        0x70
+#define MSGU_ODMR                              0x74/* RevB */
+
+/* bit definition for ODMR register */
+#define ODMR_MASK_ALL                          0xFFFFFFFF/* mask all
+                                       interrupt vector */
+#define ODMR_CLEAR_ALL                         0/* clear all
+                                       interrupt vector */
+/* bit definition for ODCR register */
+#define ODCR_CLEAR_ALL         0xFFFFFFFF   /* mask all
+                                       interrupt vector*/
+/* MSIX Interupts */
+#define MSIX_TABLE_OFFSET              0x2000
+#define MSIX_TABLE_ELEMENT_SIZE                0x10
+#define MSIX_INTERRUPT_CONTROL_OFFSET  0xC
+#define MSIX_TABLE_BASE          (MSIX_TABLE_OFFSET + MSIX_INTERRUPT_CONTROL_OFFSET)
+#define MSIX_INTERRUPT_DISABLE         0x1
+#define MSIX_INTERRUPT_ENABLE          0x0
+
+
+/* state definition for Scratch Pad1 register */
+#define SCRATCH_PAD1_POR               0x00  /* power on reset state */
+#define SCRATCH_PAD1_SFR               0x01  /* soft reset state */
+#define SCRATCH_PAD1_ERR               0x02  /* error state */
+#define SCRATCH_PAD1_RDY               0x03  /* ready state */
+#define SCRATCH_PAD1_RST               0x04  /* soft reset toggle flag */
+#define SCRATCH_PAD1_AAP1RDY_RST       0x08  /* AAP1 ready for soft reset */
+#define SCRATCH_PAD1_STATE_MASK                0xFFFFFFF0   /* ScratchPad1
+ Mask, bit1-0 State, bit2 Soft Reset, bit3 FW RDY for Soft Reset */
+#define SCRATCH_PAD1_RESERVED          0x000003F8   /* Scratch Pad1
+ Reserved bit 3 to 9 */
+
+ /* state definition for Scratch Pad2 register */
+#define SCRATCH_PAD2_POR               0x00  /* power on state */
+#define SCRATCH_PAD2_SFR               0x01  /* soft reset state */
+#define SCRATCH_PAD2_ERR               0x02  /* error state */
+#define SCRATCH_PAD2_RDY               0x03  /* ready state */
+#define SCRATCH_PAD2_FWRDY_RST         0x04  /* FW ready for soft reset flag*/
+#define SCRATCH_PAD2_IOPRDY_RST                0x08  /* IOP ready for soft reset */
+#define SCRATCH_PAD2_STATE_MASK                0xFFFFFFF4 /* ScratchPad 2
+ Mask, bit1-0 State */
+#define SCRATCH_PAD2_RESERVED          0x000003FC   /* Scratch Pad1
+ Reserved bit 2 to 9 */
+
+#define SCRATCH_PAD_ERROR_MASK         0xFFFFFC00   /* Error mask bits */
+#define SCRATCH_PAD_STATE_MASK         0x00000003   /* State Mask bits */
+
+/* main configuration offset - byte offset */
+#define MAIN_SIGNATURE_OFFSET          0x00/* DWORD 0x00 */
+#define MAIN_INTERFACE_REVISION                0x04/* DWORD 0x01 */
+#define MAIN_FW_REVISION               0x08/* DWORD 0x02 */
+#define MAIN_MAX_OUTSTANDING_IO_OFFSET 0x0C/* DWORD 0x03 */
+#define MAIN_MAX_SGL_OFFSET            0x10/* DWORD 0x04 */
+#define MAIN_CNTRL_CAP_OFFSET          0x14/* DWORD 0x05 */
+#define MAIN_GST_OFFSET                        0x18/* DWORD 0x06 */
+#define MAIN_IBQ_OFFSET                        0x1C/* DWORD 0x07 */
+#define MAIN_OBQ_OFFSET                        0x20/* DWORD 0x08 */
+#define MAIN_IQNPPD_HPPD_OFFSET                0x24/* DWORD 0x09 */
+#define MAIN_OB_HW_EVENT_PID03_OFFSET  0x28/* DWORD 0x0A */
+#define MAIN_OB_HW_EVENT_PID47_OFFSET  0x2C/* DWORD 0x0B */
+#define MAIN_OB_NCQ_EVENT_PID03_OFFSET 0x30/* DWORD 0x0C */
+#define MAIN_OB_NCQ_EVENT_PID47_OFFSET 0x34/* DWORD 0x0D */
+#define MAIN_TITNX_EVENT_PID03_OFFSET  0x38/* DWORD 0x0E */
+#define MAIN_TITNX_EVENT_PID47_OFFSET  0x3C/* DWORD 0x0F */
+#define MAIN_OB_SSP_EVENT_PID03_OFFSET 0x40/* DWORD 0x10 */
+#define MAIN_OB_SSP_EVENT_PID47_OFFSET 0x44/* DWORD 0x11 */
+#define MAIN_OB_SMP_EVENT_PID03_OFFSET 0x48/* DWORD 0x12 */
+#define MAIN_OB_SMP_EVENT_PID47_OFFSET 0x4C/* DWORD 0x13 */
+#define MAIN_EVENT_LOG_ADDR_HI         0x50/* DWORD 0x14 */
+#define MAIN_EVENT_LOG_ADDR_LO         0x54/* DWORD 0x15 */
+#define MAIN_EVENT_LOG_BUFF_SIZE       0x58/* DWORD 0x16 */
+#define MAIN_EVENT_LOG_OPTION          0x5C/* DWORD 0x17 */
+#define MAIN_IOP_EVENT_LOG_ADDR_HI     0x60/* DWORD 0x18 */
+#define MAIN_IOP_EVENT_LOG_ADDR_LO     0x64/* DWORD 0x19 */
+#define MAIN_IOP_EVENT_LOG_BUFF_SIZE   0x68/* DWORD 0x1A */
+#define MAIN_IOP_EVENT_LOG_OPTION      0x6C/* DWORD 0x1B */
+#define MAIN_FATAL_ERROR_INTERRUPT     0x70/* DWORD 0x1C */
+#define MAIN_FATAL_ERROR_RDUMP0_OFFSET 0x74/* DWORD 0x1D */
+#define MAIN_FATAL_ERROR_RDUMP0_LENGTH 0x78/* DWORD 0x1E */
+#define MAIN_FATAL_ERROR_RDUMP1_OFFSET 0x7C/* DWORD 0x1F */
+#define MAIN_FATAL_ERROR_RDUMP1_LENGTH 0x80/* DWORD 0x20 */
+#define MAIN_HDA_FLAGS_OFFSET          0x84/* DWORD 0x21 */
+#define MAIN_ANALOG_SETUP_OFFSET       0x88/* DWORD 0x22 */
+
+/* Gereral Status Table offset - byte offset */
+#define GST_GSTLEN_MPIS_OFFSET         0x00
+#define GST_IQ_FREEZE_STATE0_OFFSET    0x04
+#define GST_IQ_FREEZE_STATE1_OFFSET    0x08
+#define GST_MSGUTCNT_OFFSET            0x0C
+#define GST_IOPTCNT_OFFSET             0x10
+#define GST_PHYSTATE_OFFSET            0x18
+#define GST_PHYSTATE0_OFFSET           0x18
+#define GST_PHYSTATE1_OFFSET           0x1C
+#define GST_PHYSTATE2_OFFSET           0x20
+#define GST_PHYSTATE3_OFFSET           0x24
+#define GST_PHYSTATE4_OFFSET           0x28
+#define GST_PHYSTATE5_OFFSET           0x2C
+#define GST_PHYSTATE6_OFFSET           0x30
+#define GST_PHYSTATE7_OFFSET           0x34
+#define GST_RERRINFO_OFFSET            0x44
+
+/* General Status Table - MPI state */
+#define GST_MPI_STATE_UNINIT           0x00
+#define GST_MPI_STATE_INIT             0x01
+#define GST_MPI_STATE_TERMINATION      0x02
+#define GST_MPI_STATE_ERROR            0x03
+#define GST_MPI_STATE_MASK             0x07
+
+#define MBIC_NMI_ENABLE_VPE0_IOP       0x000418
+#define MBIC_NMI_ENABLE_VPE0_AAP1      0x000418
+/* PCIE registers - BAR2(0x18), BAR1(win) 0x010000 */
+#define PCIE_EVENT_INTERRUPT_ENABLE    0x003040
+#define PCIE_EVENT_INTERRUPT           0x003044
+#define PCIE_ERROR_INTERRUPT_ENABLE    0x003048
+#define PCIE_ERROR_INTERRUPT           0x00304C
+/* signature defintion for host scratch pad0 register */
+#define SPC_SOFT_RESET_SIGNATURE       0x252acbcd
+/* Signature for Soft Reset */
+
+/* SPC Reset register - BAR4(0x20), BAR2(win) (need dynamic mapping) */
+#define SPC_REG_RESET                  0x000000/* reset register */
+
+/* bit difination for SPC_RESET register */
+#define   SPC_REG_RESET_OSSP           0x00000001
+#define   SPC_REG_RESET_RAAE           0x00000002
+#define   SPC_REG_RESET_PCS_SPBC       0x00000004
+#define   SPC_REG_RESET_PCS_IOP_SS     0x00000008
+#define   SPC_REG_RESET_PCS_AAP1_SS    0x00000010
+#define   SPC_REG_RESET_PCS_AAP2_SS    0x00000020
+#define   SPC_REG_RESET_PCS_LM         0x00000040
+#define   SPC_REG_RESET_PCS            0x00000080
+#define   SPC_REG_RESET_GSM            0x00000100
+#define   SPC_REG_RESET_DDR2           0x00010000
+#define   SPC_REG_RESET_BDMA_CORE      0x00020000
+#define   SPC_REG_RESET_BDMA_SXCBI     0x00040000
+#define   SPC_REG_RESET_PCIE_AL_SXCBI  0x00080000
+#define   SPC_REG_RESET_PCIE_PWR       0x00100000
+#define   SPC_REG_RESET_PCIE_SFT       0x00200000
+#define   SPC_REG_RESET_PCS_SXCBI      0x00400000
+#define   SPC_REG_RESET_LMS_SXCBI      0x00800000
+#define   SPC_REG_RESET_PMIC_SXCBI     0x01000000
+#define   SPC_REG_RESET_PMIC_CORE      0x02000000
+#define   SPC_REG_RESET_PCIE_PC_SXCBI  0x04000000
+#define   SPC_REG_RESET_DEVICE         0x80000000
+
+/* registers for BAR Shifting - BAR2(0x18), BAR1(win) */
+#define SPC_IBW_AXI_TRANSLATION_LOW    0x003258
+
+#define MBIC_AAP1_ADDR_BASE            0x060000
+#define MBIC_IOP_ADDR_BASE             0x070000
+#define GSM_ADDR_BASE                  0x0700000
+/* Dynamic map through Bar4 - 0x00700000 */
+#define GSM_CONFIG_RESET               0x00000000
+#define RAM_ECC_DB_ERR                 0x00000018
+#define GSM_READ_ADDR_PARITY_INDIC     0x00000058
+#define GSM_WRITE_ADDR_PARITY_INDIC    0x00000060
+#define GSM_WRITE_DATA_PARITY_INDIC    0x00000068
+#define GSM_READ_ADDR_PARITY_CHECK     0x00000038
+#define GSM_WRITE_ADDR_PARITY_CHECK    0x00000040
+#define GSM_WRITE_DATA_PARITY_CHECK    0x00000048
+
+#define RB6_ACCESS_REG                 0x6A0000
+#define HDAC_EXEC_CMD                  0x0002
+#define HDA_C_PA                       0xcb
+#define HDA_SEQ_ID_BITS                        0x00ff0000
+#define HDA_GSM_OFFSET_BITS            0x00FFFFFF
+#define MBIC_AAP1_ADDR_BASE            0x060000
+#define MBIC_IOP_ADDR_BASE             0x070000
+#define GSM_ADDR_BASE                  0x0700000
+#define SPC_TOP_LEVEL_ADDR_BASE                0x000000
+#define GSM_CONFIG_RESET_VALUE          0x00003b00
+#define GPIO_ADDR_BASE                  0x00090000
+#define GPIO_GPIO_0_0UTPUT_CTL_OFFSET   0x0000010c
+
+/* RB6 offset */
+#define SPC_RB6_OFFSET                 0x80C0
+/* Magic number of  soft reset for RB6 */
+#define RB6_MAGIC_NUMBER_RST           0x1234
+
+/* Device Register status */
+#define DEVREG_SUCCESS                                 0x00
+#define DEVREG_FAILURE_OUT_OF_RESOURCE                 0x01
+#define DEVREG_FAILURE_DEVICE_ALREADY_REGISTERED       0x02
+#define DEVREG_FAILURE_INVALID_PHY_ID                  0x03
+#define DEVREG_FAILURE_PHY_ID_ALREADY_REGISTERED       0x04
+#define DEVREG_FAILURE_PORT_ID_OUT_OF_RANGE            0x05
+#define DEVREG_FAILURE_PORT_NOT_VALID_STATE            0x06
+#define DEVREG_FAILURE_DEVICE_TYPE_NOT_VALID           0x07
+
+#endif
+
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
new file mode 100644 (file)
index 0000000..811b5d3
--- /dev/null
@@ -0,0 +1,888 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include "pm8001_sas.h"
+#include "pm8001_chips.h"
+
+static struct scsi_transport_template *pm8001_stt;
+
+static const struct pm8001_chip_info pm8001_chips[] = {
+       [chip_8001] = {  8, &pm8001_8001_dispatch,},
+};
+static int pm8001_id;
+
+LIST_HEAD(hba_list);
+
+/**
+ * The main structure which LLDD must register for scsi core.
+ */
+static struct scsi_host_template pm8001_sht = {
+       .module                 = THIS_MODULE,
+       .name                   = DRV_NAME,
+       .queuecommand           = sas_queuecommand,
+       .target_alloc           = sas_target_alloc,
+       .slave_configure        = pm8001_slave_configure,
+       .slave_destroy          = sas_slave_destroy,
+       .scan_finished          = pm8001_scan_finished,
+       .scan_start             = pm8001_scan_start,
+       .change_queue_depth     = sas_change_queue_depth,
+       .change_queue_type      = sas_change_queue_type,
+       .bios_param             = sas_bios_param,
+       .can_queue              = 1,
+       .cmd_per_lun            = 1,
+       .this_id                = -1,
+       .sg_tablesize           = SG_ALL,
+       .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
+       .use_clustering         = ENABLE_CLUSTERING,
+       .eh_device_reset_handler = sas_eh_device_reset_handler,
+       .eh_bus_reset_handler   = sas_eh_bus_reset_handler,
+       .slave_alloc            = pm8001_slave_alloc,
+       .target_destroy         = sas_target_destroy,
+       .ioctl                  = sas_ioctl,
+       .shost_attrs            = pm8001_host_attrs,
+};
+
+/**
+ * Sas layer call this function to execute specific task.
+ */
+static struct sas_domain_function_template pm8001_transport_ops = {
+       .lldd_dev_found         = pm8001_dev_found,
+       .lldd_dev_gone          = pm8001_dev_gone,
+
+       .lldd_execute_task      = pm8001_queue_command,
+       .lldd_control_phy       = pm8001_phy_control,
+
+       .lldd_abort_task        = pm8001_abort_task,
+       .lldd_abort_task_set    = pm8001_abort_task_set,
+       .lldd_clear_aca         = pm8001_clear_aca,
+       .lldd_clear_task_set    = pm8001_clear_task_set,
+       .lldd_I_T_nexus_reset   = pm8001_I_T_nexus_reset,
+       .lldd_lu_reset          = pm8001_lu_reset,
+       .lldd_query_task        = pm8001_query_task,
+};
+
+/**
+ *pm8001_phy_init - initiate our adapter phys
+ *@pm8001_ha: our hba structure.
+ *@phy_id: phy id.
+ */
+static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
+       int phy_id)
+{
+       struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
+       struct asd_sas_phy *sas_phy = &phy->sas_phy;
+       phy->phy_state = 0;
+       phy->pm8001_ha = pm8001_ha;
+       sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
+       sas_phy->class = SAS;
+       sas_phy->iproto = SAS_PROTOCOL_ALL;
+       sas_phy->tproto = 0;
+       sas_phy->type = PHY_TYPE_PHYSICAL;
+       sas_phy->role = PHY_ROLE_INITIATOR;
+       sas_phy->oob_mode = OOB_NOT_CONNECTED;
+       sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
+       sas_phy->id = phy_id;
+       sas_phy->sas_addr = &pm8001_ha->sas_addr[0];
+       sas_phy->frame_rcvd = &phy->frame_rcvd[0];
+       sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
+       sas_phy->lldd_phy = phy;
+}
+
+/**
+ *pm8001_free - free hba
+ *@pm8001_ha:  our hba structure.
+ *
+ */
+static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
+{
+       int i;
+       struct pm8001_wq *wq;
+
+       if (!pm8001_ha)
+               return;
+
+       for (i = 0; i < USI_MAX_MEMCNT; i++) {
+               if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
+                       pci_free_consistent(pm8001_ha->pdev,
+                               pm8001_ha->memoryMap.region[i].element_size,
+                               pm8001_ha->memoryMap.region[i].virt_ptr,
+                               pm8001_ha->memoryMap.region[i].phys_addr);
+                       }
+       }
+       PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
+       if (pm8001_ha->shost)
+               scsi_host_put(pm8001_ha->shost);
+       list_for_each_entry(wq, &pm8001_ha->wq_list, entry)
+               cancel_delayed_work(&wq->work_q);
+       kfree(pm8001_ha->tags);
+       kfree(pm8001_ha);
+}
+
+#ifdef PM8001_USE_TASKLET
+static void pm8001_tasklet(unsigned long opaque)
+{
+       struct pm8001_hba_info *pm8001_ha;
+       pm8001_ha = (struct pm8001_hba_info *)opaque;;
+       if (unlikely(!pm8001_ha))
+               BUG_ON(1);
+       PM8001_CHIP_DISP->isr(pm8001_ha);
+}
+#endif
+
+
+ /**
+  * pm8001_interrupt - when HBA originate a interrupt,we should invoke this
+  * dispatcher to handle each case.
+  * @irq: irq number.
+  * @opaque: the passed general host adapter struct
+  */
+static irqreturn_t pm8001_interrupt(int irq, void *opaque)
+{
+       struct pm8001_hba_info *pm8001_ha;
+       irqreturn_t ret = IRQ_HANDLED;
+       struct sas_ha_struct *sha = opaque;
+       pm8001_ha = sha->lldd_ha;
+       if (unlikely(!pm8001_ha))
+               return IRQ_NONE;
+       if (!PM8001_CHIP_DISP->is_our_interupt(pm8001_ha))
+               return IRQ_NONE;
+#ifdef PM8001_USE_TASKLET
+       tasklet_schedule(&pm8001_ha->tasklet);
+#else
+       ret = PM8001_CHIP_DISP->isr(pm8001_ha);
+#endif
+       return ret;
+}
+
+/**
+ * pm8001_alloc - initiate our hba structure and 6 DMAs area.
+ * @pm8001_ha:our hba structure.
+ *
+ */
+static int __devinit pm8001_alloc(struct pm8001_hba_info *pm8001_ha)
+{
+       int i;
+       spin_lock_init(&pm8001_ha->lock);
+       for (i = 0; i < pm8001_ha->chip->n_phy; i++)
+               pm8001_phy_init(pm8001_ha, i);
+
+       pm8001_ha->tags = kmalloc(sizeof(*pm8001_ha->tags)*PM8001_MAX_DEVICES,
+               GFP_KERNEL);
+
+       /* MPI Memory region 1 for AAP Event Log for fw */
+       pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
+       pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->memoryMap.region[AAP1].alignment = 32;
+
+       /* MPI Memory region 2 for IOP Event Log for fw */
+       pm8001_ha->memoryMap.region[IOP].num_elements = 1;
+       pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
+       pm8001_ha->memoryMap.region[IOP].alignment = 32;
+
+       /* MPI Memory region 3 for consumer Index of inbound queues */
+       pm8001_ha->memoryMap.region[CI].num_elements = 1;
+       pm8001_ha->memoryMap.region[CI].element_size = 4;
+       pm8001_ha->memoryMap.region[CI].total_len = 4;
+       pm8001_ha->memoryMap.region[CI].alignment = 4;
+
+       /* MPI Memory region 4 for producer Index of outbound queues */
+       pm8001_ha->memoryMap.region[PI].num_elements = 1;
+       pm8001_ha->memoryMap.region[PI].element_size = 4;
+       pm8001_ha->memoryMap.region[PI].total_len = 4;
+       pm8001_ha->memoryMap.region[PI].alignment = 4;
+
+       /* MPI Memory region 5 inbound queues */
+       pm8001_ha->memoryMap.region[IB].num_elements = 256;
+       pm8001_ha->memoryMap.region[IB].element_size = 64;
+       pm8001_ha->memoryMap.region[IB].total_len = 256 * 64;
+       pm8001_ha->memoryMap.region[IB].alignment = 64;
+
+       /* MPI Memory region 6 inbound queues */
+       pm8001_ha->memoryMap.region[OB].num_elements = 256;
+       pm8001_ha->memoryMap.region[OB].element_size = 64;
+       pm8001_ha->memoryMap.region[OB].total_len = 256 * 64;
+       pm8001_ha->memoryMap.region[OB].alignment = 64;
+
+       /* Memory region write DMA*/
+       pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
+       pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
+       pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
+       /* Memory region for devices*/
+       pm8001_ha->memoryMap.region[DEV_MEM].num_elements = 1;
+       pm8001_ha->memoryMap.region[DEV_MEM].element_size = PM8001_MAX_DEVICES *
+               sizeof(struct pm8001_device);
+       pm8001_ha->memoryMap.region[DEV_MEM].total_len = PM8001_MAX_DEVICES *
+               sizeof(struct pm8001_device);
+
+       /* Memory region for ccb_info*/
+       pm8001_ha->memoryMap.region[CCB_MEM].num_elements = 1;
+       pm8001_ha->memoryMap.region[CCB_MEM].element_size = PM8001_MAX_CCB *
+               sizeof(struct pm8001_ccb_info);
+       pm8001_ha->memoryMap.region[CCB_MEM].total_len = PM8001_MAX_CCB *
+               sizeof(struct pm8001_ccb_info);
+
+       for (i = 0; i < USI_MAX_MEMCNT; i++) {
+               if (pm8001_mem_alloc(pm8001_ha->pdev,
+                       &pm8001_ha->memoryMap.region[i].virt_ptr,
+                       &pm8001_ha->memoryMap.region[i].phys_addr,
+                       &pm8001_ha->memoryMap.region[i].phys_addr_hi,
+                       &pm8001_ha->memoryMap.region[i].phys_addr_lo,
+                       pm8001_ha->memoryMap.region[i].total_len,
+                       pm8001_ha->memoryMap.region[i].alignment) != 0) {
+                               PM8001_FAIL_DBG(pm8001_ha,
+                                       pm8001_printk("Mem%d alloc failed\n",
+                                       i));
+                               goto err_out;
+               }
+       }
+
+       pm8001_ha->devices = pm8001_ha->memoryMap.region[DEV_MEM].virt_ptr;
+       for (i = 0; i < PM8001_MAX_DEVICES; i++) {
+               pm8001_ha->devices[i].dev_type = NO_DEVICE;
+               pm8001_ha->devices[i].id = i;
+               pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
+               pm8001_ha->devices[i].running_req = 0;
+       }
+       pm8001_ha->ccb_info = pm8001_ha->memoryMap.region[CCB_MEM].virt_ptr;
+       for (i = 0; i < PM8001_MAX_CCB; i++) {
+               pm8001_ha->ccb_info[i].ccb_dma_handle =
+                       pm8001_ha->memoryMap.region[CCB_MEM].phys_addr +
+                       i * sizeof(struct pm8001_ccb_info);
+               ++pm8001_ha->tags_num;
+       }
+       pm8001_ha->flags = PM8001F_INIT_TIME;
+       /* Initialize tags */
+       pm8001_tag_init(pm8001_ha);
+       return 0;
+err_out:
+       return 1;
+}
+
+/**
+ * pm8001_ioremap - remap the pci high physical address to kernal virtual
+ * address so that we can access them.
+ * @pm8001_ha:our hba structure.
+ */
+static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 bar;
+       u32 logicalBar = 0;
+       struct pci_dev *pdev;
+
+       pdev = pm8001_ha->pdev;
+       /* map pci mem (PMC pci base 0-3)*/
+       for (bar = 0; bar < 6; bar++) {
+               /*
+               ** logical BARs for SPC:
+               ** bar 0 and 1 - logical BAR0
+               ** bar 2 and 3 - logical BAR1
+               ** bar4 - logical BAR2
+               ** bar5 - logical BAR3
+               ** Skip the appropriate assignments:
+               */
+               if ((bar == 1) || (bar == 3))
+                       continue;
+               if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
+                       pm8001_ha->io_mem[logicalBar].membase =
+                               pci_resource_start(pdev, bar);
+                       pm8001_ha->io_mem[logicalBar].membase &=
+                               (u32)PCI_BASE_ADDRESS_MEM_MASK;
+                       pm8001_ha->io_mem[logicalBar].memsize =
+                               pci_resource_len(pdev, bar);
+                       pm8001_ha->io_mem[logicalBar].memvirtaddr =
+                               ioremap(pm8001_ha->io_mem[logicalBar].membase,
+                               pm8001_ha->io_mem[logicalBar].memsize);
+                       PM8001_INIT_DBG(pm8001_ha,
+                               pm8001_printk("PCI: bar %d, logicalBar %d "
+                               "virt_addr=%lx,len=%d\n", bar, logicalBar,
+                               (unsigned long)
+                               pm8001_ha->io_mem[logicalBar].memvirtaddr,
+                               pm8001_ha->io_mem[logicalBar].memsize));
+               } else {
+                       pm8001_ha->io_mem[logicalBar].membase   = 0;
+                       pm8001_ha->io_mem[logicalBar].memsize   = 0;
+                       pm8001_ha->io_mem[logicalBar].memvirtaddr = 0;
+               }
+               logicalBar++;
+       }
+       return 0;
+}
+
+/**
+ * pm8001_pci_alloc - initialize our ha card structure
+ * @pdev: pci device.
+ * @ent: ent
+ * @shost: scsi host struct which has been initialized before.
+ */
+static struct pm8001_hba_info *__devinit
+pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
+{
+       struct pm8001_hba_info *pm8001_ha;
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+
+       pm8001_ha = sha->lldd_ha;
+       if (!pm8001_ha)
+               return NULL;
+
+       pm8001_ha->pdev = pdev;
+       pm8001_ha->dev = &pdev->dev;
+       pm8001_ha->chip_id = chip_id;
+       pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
+       pm8001_ha->irq = pdev->irq;
+       pm8001_ha->sas = sha;
+       pm8001_ha->shost = shost;
+       pm8001_ha->id = pm8001_id++;
+       INIT_LIST_HEAD(&pm8001_ha->wq_list);
+       pm8001_ha->logging_level = 0x01;
+       sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
+#ifdef PM8001_USE_TASKLET
+       tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+               (unsigned long)pm8001_ha);
+#endif
+       pm8001_ioremap(pm8001_ha);
+       if (!pm8001_alloc(pm8001_ha))
+               return pm8001_ha;
+       pm8001_free(pm8001_ha);
+       return NULL;
+}
+
+/**
+ * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
+ * @pdev: pci device.
+ */
+static int pci_go_44(struct pci_dev *pdev)
+{
+       int rc;
+
+       if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(44))) {
+               rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(44));
+               if (rc) {
+                       rc = pci_set_consistent_dma_mask(pdev,
+                               DMA_BIT_MASK(32));
+                       if (rc) {
+                               dev_printk(KERN_ERR, &pdev->dev,
+                                       "44-bit DMA enable failed\n");
+                               return rc;
+                       }
+               }
+       } else {
+               rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                               "32-bit DMA enable failed\n");
+                       return rc;
+               }
+               rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+               if (rc) {
+                       dev_printk(KERN_ERR, &pdev->dev,
+                               "32-bit consistent DMA enable failed\n");
+                       return rc;
+               }
+       }
+       return rc;
+}
+
+/**
+ * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
+ * @shost: scsi host which has been allocated outside.
+ * @chip_info: our ha struct.
+ */
+static int __devinit pm8001_prep_sas_ha_init(struct Scsi_Host * shost,
+       const struct pm8001_chip_info *chip_info)
+{
+       int phy_nr, port_nr;
+       struct asd_sas_phy **arr_phy;
+       struct asd_sas_port **arr_port;
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+       phy_nr = chip_info->n_phy;
+       port_nr = phy_nr;
+       memset(sha, 0x00, sizeof(*sha));
+       arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
+       if (!arr_phy)
+               goto exit;
+       arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
+       if (!arr_port)
+               goto exit_free2;
+
+       sha->sas_phy = arr_phy;
+       sha->sas_port = arr_port;
+       sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
+       if (!sha->lldd_ha)
+               goto exit_free1;
+
+       shost->transportt = pm8001_stt;
+       shost->max_id = PM8001_MAX_DEVICES;
+       shost->max_lun = 8;
+       shost->max_channel = 0;
+       shost->unique_id = pm8001_id;
+       shost->max_cmd_len = 16;
+       shost->can_queue = PM8001_CAN_QUEUE;
+       shost->cmd_per_lun = 32;
+       return 0;
+exit_free1:
+       kfree(arr_port);
+exit_free2:
+       kfree(arr_phy);
+exit:
+       return -1;
+}
+
+/**
+ * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
+ * @shost: scsi host which has been allocated outside
+ * @chip_info: our ha struct.
+ */
+static void  __devinit pm8001_post_sas_ha_init(struct Scsi_Host *shost,
+       const struct pm8001_chip_info *chip_info)
+{
+       int i = 0;
+       struct pm8001_hba_info *pm8001_ha;
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+
+       pm8001_ha = sha->lldd_ha;
+       for (i = 0; i < chip_info->n_phy; i++) {
+               sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
+               sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
+       }
+       sha->sas_ha_name = DRV_NAME;
+       sha->dev = pm8001_ha->dev;
+
+       sha->lldd_module = THIS_MODULE;
+       sha->sas_addr = &pm8001_ha->sas_addr[0];
+       sha->num_phys = chip_info->n_phy;
+       sha->lldd_max_execute_num = 1;
+       sha->lldd_queue_size = PM8001_CAN_QUEUE;
+       sha->core.shost = shost;
+}
+
+/**
+ * pm8001_init_sas_add - initialize sas address
+ * @chip_info: our ha struct.
+ *
+ * Currently we just set the fixed SAS address to our HBA,for manufacture,
+ * it should read from the EEPROM
+ */
+static void pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
+{
+       u8 i;
+#ifdef PM8001_READ_VPD
+       DECLARE_COMPLETION_ONSTACK(completion);
+       pm8001_ha->nvmd_completion = &completion;
+       PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, 0, 0);
+       wait_for_completion(&completion);
+       for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+               memcpy(&pm8001_ha->phy[i].dev_sas_addr, pm8001_ha->sas_addr,
+                       SAS_ADDR_SIZE);
+               PM8001_INIT_DBG(pm8001_ha,
+                       pm8001_printk("phy %d sas_addr = %x \n", i,
+                       (u64)pm8001_ha->phy[i].dev_sas_addr));
+       }
+#else
+       for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
+               pm8001_ha->phy[i].dev_sas_addr = 0x500e004010000004ULL;
+               pm8001_ha->phy[i].dev_sas_addr =
+                       cpu_to_be64((u64)
+                               (*(u64 *)&pm8001_ha->phy[i].dev_sas_addr));
+       }
+       memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
+               SAS_ADDR_SIZE);
+#endif
+}
+
+#ifdef PM8001_USE_MSIX
+/**
+ * pm8001_setup_msix - enable MSI-X interrupt
+ * @chip_info: our ha struct.
+ * @irq_handler: irq_handler
+ */
+static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha,
+       irq_handler_t irq_handler)
+{
+       u32 i = 0, j = 0;
+       u32 number_of_intr = 1;
+       int flag = 0;
+       u32 max_entry;
+       int rc;
+       max_entry = sizeof(pm8001_ha->msix_entries) /
+               sizeof(pm8001_ha->msix_entries[0]);
+       flag |= IRQF_DISABLED;
+       for (i = 0; i < max_entry ; i++)
+               pm8001_ha->msix_entries[i].entry = i;
+       rc = pci_enable_msix(pm8001_ha->pdev, pm8001_ha->msix_entries,
+               number_of_intr);
+       pm8001_ha->number_of_intr = number_of_intr;
+       if (!rc) {
+               for (i = 0; i < number_of_intr; i++) {
+                       if (request_irq(pm8001_ha->msix_entries[i].vector,
+                               irq_handler, flag, DRV_NAME,
+                               SHOST_TO_SAS_HA(pm8001_ha->shost))) {
+                               for (j = 0; j < i; j++)
+                                       free_irq(
+                                       pm8001_ha->msix_entries[j].vector,
+                                       SHOST_TO_SAS_HA(pm8001_ha->shost));
+                               pci_disable_msix(pm8001_ha->pdev);
+                               break;
+                       }
+               }
+       }
+       return rc;
+}
+#endif
+
+/**
+ * pm8001_request_irq - register interrupt
+ * @chip_info: our ha struct.
+ */
+static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
+{
+       struct pci_dev *pdev;
+       irq_handler_t irq_handler = pm8001_interrupt;
+       u32 rc;
+
+       pdev = pm8001_ha->pdev;
+
+#ifdef PM8001_USE_MSIX
+       if (pci_find_capability(pdev, PCI_CAP_ID_MSIX))
+               return pm8001_setup_msix(pm8001_ha, irq_handler);
+       else
+               goto intx;
+#endif
+
+intx:
+       /* intialize the INT-X interrupt */
+       rc = request_irq(pdev->irq, irq_handler, IRQF_SHARED, DRV_NAME,
+               SHOST_TO_SAS_HA(pm8001_ha->shost));
+       return rc;
+}
+
+/**
+ * pm8001_pci_probe - probe supported device
+ * @pdev: pci device which kernel has been prepared for.
+ * @ent: pci device id
+ *
+ * This function is the main initialization function, when register a new
+ * pci driver it is invoked, all struct an hardware initilization should be done
+ * here, also, register interrupt
+ */
+static int __devinit pm8001_pci_probe(struct pci_dev *pdev,
+       const struct pci_device_id *ent)
+{
+       unsigned int rc;
+       u32     pci_reg;
+       struct pm8001_hba_info *pm8001_ha;
+       struct Scsi_Host *shost = NULL;
+       const struct pm8001_chip_info *chip;
+
+       dev_printk(KERN_INFO, &pdev->dev,
+               "pm8001: driver version %s\n", DRV_VERSION);
+       rc = pci_enable_device(pdev);
+       if (rc)
+               goto err_out_enable;
+       pci_set_master(pdev);
+       /*
+        * Enable pci slot busmaster by setting pci command register.
+        * This is required by FW for Cyclone card.
+        */
+
+       pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
+       pci_reg |= 0x157;
+       pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
+       rc = pci_request_regions(pdev, DRV_NAME);
+       if (rc)
+               goto err_out_disable;
+       rc = pci_go_44(pdev);
+       if (rc)
+               goto err_out_regions;
+
+       shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
+       if (!shost) {
+               rc = -ENOMEM;
+               goto err_out_regions;
+       }
+       chip = &pm8001_chips[ent->driver_data];
+       SHOST_TO_SAS_HA(shost) =
+               kcalloc(1, sizeof(struct sas_ha_struct), GFP_KERNEL);
+       if (!SHOST_TO_SAS_HA(shost)) {
+               rc = -ENOMEM;
+               goto err_out_free_host;
+       }
+
+       rc = pm8001_prep_sas_ha_init(shost, chip);
+       if (rc) {
+               rc = -ENOMEM;
+               goto err_out_free;
+       }
+       pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
+       pm8001_ha = pm8001_pci_alloc(pdev, chip_8001, shost);
+       if (!pm8001_ha) {
+               rc = -ENOMEM;
+               goto err_out_free;
+       }
+       list_add_tail(&pm8001_ha->list, &hba_list);
+       PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+       rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+       if (rc)
+               goto err_out_ha_free;
+
+       rc = scsi_add_host(shost, &pdev->dev);
+       if (rc)
+               goto err_out_ha_free;
+       rc = pm8001_request_irq(pm8001_ha);
+       if (rc)
+               goto err_out_shost;
+
+       PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+       pm8001_init_sas_add(pm8001_ha);
+       pm8001_post_sas_ha_init(shost, chip);
+       rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
+       if (rc)
+               goto err_out_shost;
+       scsi_scan_host(pm8001_ha->shost);
+       return 0;
+
+err_out_shost:
+       scsi_remove_host(pm8001_ha->shost);
+err_out_ha_free:
+       pm8001_free(pm8001_ha);
+err_out_free:
+       kfree(SHOST_TO_SAS_HA(shost));
+err_out_free_host:
+       kfree(shost);
+err_out_regions:
+       pci_release_regions(pdev);
+err_out_disable:
+       pci_disable_device(pdev);
+err_out_enable:
+       return rc;
+}
+
+static void __devexit pm8001_pci_remove(struct pci_dev *pdev)
+{
+       struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+       struct pm8001_hba_info *pm8001_ha;
+       int i;
+       pm8001_ha = sha->lldd_ha;
+       pci_set_drvdata(pdev, NULL);
+       sas_unregister_ha(sha);
+       sas_remove_host(pm8001_ha->shost);
+       list_del(&pm8001_ha->list);
+       scsi_remove_host(pm8001_ha->shost);
+       PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+       PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+
+#ifdef PM8001_USE_MSIX
+       for (i = 0; i < pm8001_ha->number_of_intr; i++)
+               synchronize_irq(pm8001_ha->msix_entries[i].vector);
+       for (i = 0; i < pm8001_ha->number_of_intr; i++)
+               free_irq(pm8001_ha->msix_entries[i].vector, sha);
+       pci_disable_msix(pdev);
+#else
+       free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+       tasklet_kill(&pm8001_ha->tasklet);
+#endif
+       pm8001_free(pm8001_ha);
+       kfree(sha->sas_phy);
+       kfree(sha->sas_port);
+       kfree(sha);
+       pci_release_regions(pdev);
+       pci_disable_device(pdev);
+}
+
+/**
+ * pm8001_pci_suspend - power management suspend main entry point
+ * @pdev: PCI device struct
+ * @state: PM state change to (usually PCI_D3)
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+       struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+       struct pm8001_hba_info *pm8001_ha;
+       int i , pos;
+       u32 device_state;
+       pm8001_ha = sha->lldd_ha;
+       flush_scheduled_work();
+       scsi_block_requests(pm8001_ha->shost);
+       pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+       if (pos == 0) {
+               printk(KERN_ERR " PCI PM not supported\n");
+               return -ENODEV;
+       }
+       PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+       PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+#ifdef PM8001_USE_MSIX
+       for (i = 0; i < pm8001_ha->number_of_intr; i++)
+               synchronize_irq(pm8001_ha->msix_entries[i].vector);
+       for (i = 0; i < pm8001_ha->number_of_intr; i++)
+               free_irq(pm8001_ha->msix_entries[i].vector, sha);
+       pci_disable_msix(pdev);
+#else
+       free_irq(pm8001_ha->irq, sha);
+#endif
+#ifdef PM8001_USE_TASKLET
+       tasklet_kill(&pm8001_ha->tasklet);
+#endif
+       device_state = pci_choose_state(pdev, state);
+       pm8001_printk("pdev=0x%p, slot=%s, entering "
+                     "operating state [D%d]\n", pdev,
+                     pm8001_ha->name, device_state);
+       pci_save_state(pdev);
+       pci_disable_device(pdev);
+       pci_set_power_state(pdev, device_state);
+       return 0;
+}
+
+/**
+ * pm8001_pci_resume - power management resume main entry point
+ * @pdev: PCI device struct
+ *
+ * Returns 0 success, anything else error.
+ */
+static int pm8001_pci_resume(struct pci_dev *pdev)
+{
+       struct sas_ha_struct *sha = pci_get_drvdata(pdev);
+       struct pm8001_hba_info *pm8001_ha;
+       int rc;
+       u32 device_state;
+       pm8001_ha = sha->lldd_ha;
+       device_state = pdev->current_state;
+
+       pm8001_printk("pdev=0x%p, slot=%s, resuming from previous "
+               "operating state [D%d]\n", pdev, pm8001_ha->name, device_state);
+
+       pci_set_power_state(pdev, PCI_D0);
+       pci_enable_wake(pdev, PCI_D0, 0);
+       pci_restore_state(pdev);
+       rc = pci_enable_device(pdev);
+       if (rc) {
+               pm8001_printk("slot=%s Enable device failed during resume\n",
+                             pm8001_ha->name);
+               goto err_out_enable;
+       }
+
+       pci_set_master(pdev);
+       rc = pci_go_44(pdev);
+       if (rc)
+               goto err_out_disable;
+
+       PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha, 0x252acbcd);
+       rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
+       if (rc)
+               goto err_out_disable;
+       PM8001_CHIP_DISP->interrupt_disable(pm8001_ha);
+       rc = pm8001_request_irq(pm8001_ha);
+       if (rc)
+               goto err_out_disable;
+       #ifdef PM8001_USE_TASKLET
+       tasklet_init(&pm8001_ha->tasklet, pm8001_tasklet,
+                   (unsigned long)pm8001_ha);
+       #endif
+       PM8001_CHIP_DISP->interrupt_enable(pm8001_ha);
+       scsi_unblock_requests(pm8001_ha->shost);
+       return 0;
+
+err_out_disable:
+       scsi_remove_host(pm8001_ha->shost);
+       pci_disable_device(pdev);
+err_out_enable:
+       return rc;
+}
+
+static struct pci_device_id __devinitdata pm8001_pci_table[] = {
+       {
+               PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001
+       },
+       {
+               PCI_DEVICE(0x117c, 0x0042),
+               .driver_data = chip_8001
+       },
+       {} /* terminate list */
+};
+
+static struct pci_driver pm8001_pci_driver = {
+       .name           = DRV_NAME,
+       .id_table       = pm8001_pci_table,
+       .probe          = pm8001_pci_probe,
+       .remove         = __devexit_p(pm8001_pci_remove),
+       .suspend        = pm8001_pci_suspend,
+       .resume         = pm8001_pci_resume,
+};
+
+/**
+ *     pm8001_init - initialize scsi transport template
+ */
+static int __init pm8001_init(void)
+{
+       int rc;
+       pm8001_id = 0;
+       pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
+       if (!pm8001_stt)
+               return -ENOMEM;
+       rc = pci_register_driver(&pm8001_pci_driver);
+       if (rc)
+               goto err_out;
+       return 0;
+err_out:
+       sas_release_transport(pm8001_stt);
+       return rc;
+}
+
+static void __exit pm8001_exit(void)
+{
+       pci_unregister_driver(&pm8001_pci_driver);
+       sas_release_transport(pm8001_stt);
+}
+
+module_init(pm8001_init);
+module_exit(pm8001_exit);
+
+MODULE_AUTHOR("Jack Wang <jack_wang@usish.com>");
+MODULE_DESCRIPTION("PMC-Sierra PM8001 SAS/SATA controller driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
new file mode 100644 (file)
index 0000000..7bf30fa
--- /dev/null
@@ -0,0 +1,1104 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#include "pm8001_sas.h"
+
+/**
+ * pm8001_find_tag - from sas task to find out  tag that belongs to this task
+ * @task: the task sent to the LLDD
+ * @tag: the found tag associated with the task
+ */
+static int pm8001_find_tag(struct sas_task *task, u32 *tag)
+{
+       if (task->lldd_task) {
+               struct pm8001_ccb_info *ccb;
+               ccb = task->lldd_task;
+               *tag = ccb->ccb_tag;
+               return 1;
+       }
+       return 0;
+}
+
+/**
+  * pm8001_tag_clear - clear the tags bitmap
+  * @pm8001_ha: our hba struct
+  * @tag: the found tag associated with the task
+  */
+static void pm8001_tag_clear(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+       void *bitmap = pm8001_ha->tags;
+       clear_bit(tag, bitmap);
+}
+
+static void pm8001_tag_free(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+       pm8001_tag_clear(pm8001_ha, tag);
+}
+
+static void pm8001_tag_set(struct pm8001_hba_info *pm8001_ha, u32 tag)
+{
+       void *bitmap = pm8001_ha->tags;
+       set_bit(tag, bitmap);
+}
+
+/**
+  * pm8001_tag_alloc - allocate a empty tag for task used.
+  * @pm8001_ha: our hba struct
+  * @tag_out: the found empty tag .
+  */
+inline int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out)
+{
+       unsigned int index, tag;
+       void *bitmap = pm8001_ha->tags;
+
+       index = find_first_zero_bit(bitmap, pm8001_ha->tags_num);
+       tag = index;
+       if (tag >= pm8001_ha->tags_num)
+               return -SAS_QUEUE_FULL;
+       pm8001_tag_set(pm8001_ha, tag);
+       *tag_out = tag;
+       return 0;
+}
+
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha)
+{
+       int i;
+       for (i = 0; i < pm8001_ha->tags_num; ++i)
+               pm8001_tag_clear(pm8001_ha, i);
+}
+
+ /**
+  * pm8001_mem_alloc - allocate memory for pm8001.
+  * @pdev: pci device.
+  * @virt_addr: the allocated virtual address
+  * @pphys_addr_hi: the physical address high byte address.
+  * @pphys_addr_lo: the physical address low byte address.
+  * @mem_size: memory size.
+  */
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+       dma_addr_t *pphys_addr, u32 *pphys_addr_hi,
+       u32 *pphys_addr_lo, u32 mem_size, u32 align)
+{
+       caddr_t mem_virt_alloc;
+       dma_addr_t mem_dma_handle;
+       u64 phys_align;
+       u64 align_offset = 0;
+       if (align)
+               align_offset = (dma_addr_t)align - 1;
+       mem_virt_alloc =
+               pci_alloc_consistent(pdev, mem_size + align, &mem_dma_handle);
+       if (!mem_virt_alloc) {
+               pm8001_printk("memory allocation error\n");
+               return -1;
+       }
+       memset((void *)mem_virt_alloc, 0, mem_size+align);
+       *pphys_addr = mem_dma_handle;
+       phys_align = (*pphys_addr + align_offset) & ~align_offset;
+       *virt_addr = (void *)mem_virt_alloc + phys_align - *pphys_addr;
+       *pphys_addr_hi = upper_32_bits(phys_align);
+       *pphys_addr_lo = lower_32_bits(phys_align);
+       return 0;
+}
+/**
+  * pm8001_find_ha_by_dev - from domain device which come from sas layer to
+  * find out our hba struct.
+  * @dev: the domain device which from sas layer.
+  */
+static
+struct pm8001_hba_info *pm8001_find_ha_by_dev(struct domain_device *dev)
+{
+       struct sas_ha_struct *sha = dev->port->ha;
+       struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
+       return pm8001_ha;
+}
+
+/**
+  * pm8001_phy_control - this function should be registered to
+  * sas_domain_function_template to provide libsas used, note: this is just
+  * control the HBA phy rather than other expander phy if you want control
+  * other phy, you should use SMP command.
+  * @sas_phy: which phy in HBA phys.
+  * @func: the operation.
+  * @funcdata: always NULL.
+  */
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+       void *funcdata)
+{
+       int rc = 0, phy_id = sas_phy->id;
+       struct pm8001_hba_info *pm8001_ha = NULL;
+       struct sas_phy_linkrates *rates;
+       DECLARE_COMPLETION_ONSTACK(completion);
+       pm8001_ha = sas_phy->ha->lldd_ha;
+       pm8001_ha->phy[phy_id].enable_completion = &completion;
+       switch (func) {
+       case PHY_FUNC_SET_LINK_RATE:
+               rates = funcdata;
+               if (rates->minimum_linkrate) {
+                       pm8001_ha->phy[phy_id].minimum_linkrate =
+                               rates->minimum_linkrate;
+               }
+               if (rates->maximum_linkrate) {
+                       pm8001_ha->phy[phy_id].maximum_linkrate =
+                               rates->maximum_linkrate;
+               }
+               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+                       PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+                       wait_for_completion(&completion);
+               }
+               PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+                                             PHY_LINK_RESET);
+               break;
+       case PHY_FUNC_HARD_RESET:
+               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+                       PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+                       wait_for_completion(&completion);
+               }
+               PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+                                             PHY_HARD_RESET);
+               break;
+       case PHY_FUNC_LINK_RESET:
+               if (pm8001_ha->phy[phy_id].phy_state == 0) {
+                       PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
+                       wait_for_completion(&completion);
+               }
+               PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+                                             PHY_LINK_RESET);
+               break;
+       case PHY_FUNC_RELEASE_SPINUP_HOLD:
+               PM8001_CHIP_DISP->phy_ctl_req(pm8001_ha, phy_id,
+                                             PHY_LINK_RESET);
+               break;
+       case PHY_FUNC_DISABLE:
+               PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
+               break;
+       default:
+               rc = -EOPNOTSUPP;
+       }
+       msleep(300);
+       return rc;
+}
+
+int pm8001_slave_alloc(struct scsi_device *scsi_dev)
+{
+       struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
+       if (dev_is_sata(dev)) {
+               /* We don't need to rescan targets
+               * if REPORT_LUNS request is failed
+               */
+               if (scsi_dev->lun > 0)
+                       return -ENXIO;
+               scsi_dev->tagged_supported = 1;
+       }
+       return sas_slave_alloc(scsi_dev);
+}
+
+/**
+  * pm8001_scan_start - we should enable all HBA phys by sending the phy_start
+  * command to HBA.
+  * @shost: the scsi host data.
+  */
+void pm8001_scan_start(struct Scsi_Host *shost)
+{
+       int i;
+       struct pm8001_hba_info *pm8001_ha;
+       struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
+       pm8001_ha = sha->lldd_ha;
+       for (i = 0; i < pm8001_ha->chip->n_phy; ++i)
+               PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
+}
+
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time)
+{
+       /* give the phy enabling interrupt event time to come in (1s
+       * is empirically about all it takes) */
+       if (time < HZ)
+               return 0;
+       /* Wait for discovery to finish */
+       scsi_flush_work(shost);
+       return 1;
+}
+
+/**
+  * pm8001_task_prep_smp - the dispatcher function, prepare data for smp task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to smp task
+  */
+static int pm8001_task_prep_smp(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       return PM8001_CHIP_DISP->smp_req(pm8001_ha, ccb);
+}
+
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag)
+{
+       struct ata_queued_cmd *qc = task->uldd_task;
+       if (qc) {
+               if (qc->tf.command == ATA_CMD_FPDMA_WRITE ||
+                       qc->tf.command == ATA_CMD_FPDMA_READ) {
+                       *tag = qc->tag;
+                       return 1;
+               }
+       }
+       return 0;
+}
+
+/**
+  * pm8001_task_prep_ata - the dispatcher function, prepare data for sata task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to sata task
+  */
+static int pm8001_task_prep_ata(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       return PM8001_CHIP_DISP->sata_req(pm8001_ha, ccb);
+}
+
+/**
+  * pm8001_task_prep_ssp_tm - the dispatcher function, prepare task management data
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to TM
+  * @tmf: the task management IU
+  */
+static int pm8001_task_prep_ssp_tm(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf)
+{
+       return PM8001_CHIP_DISP->ssp_tm_req(pm8001_ha, ccb, tmf);
+}
+
+/**
+  * pm8001_task_prep_ssp - the dispatcher function,prepare ssp data for ssp task
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to ssp task
+  */
+static int pm8001_task_prep_ssp(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_ccb_info *ccb)
+{
+       return PM8001_CHIP_DISP->ssp_io_req(pm8001_ha, ccb);
+}
+int pm8001_slave_configure(struct scsi_device *sdev)
+{
+       struct domain_device *dev = sdev_to_domain_dev(sdev);
+       int ret = sas_slave_configure(sdev);
+       if (ret)
+               return ret;
+       if (dev_is_sata(dev)) {
+       #ifdef PM8001_DISABLE_NCQ
+               struct ata_port *ap = dev->sata_dev.ap;
+               struct ata_device *adev = ap->link.device;
+               adev->flags |= ATA_DFLAG_NCQ_OFF;
+               scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, 1);
+       #endif
+       }
+       return 0;
+}
+/**
+  * pm8001_task_exec -execute the task which come from upper level, send the
+  * command or data to DMA area and then increase CI,for queuecommand(ssp),
+  * it is from upper layer and for smp command,it is from libsas,
+  * for ata command it is from libata.
+  * @task: the task to be execute.
+  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
+  * we always execute one one time.
+  * @gfp_flags: gfp_flags.
+  * @is tmf: if it is task management task.
+  * @tmf: the task management IU
+  */
+#define DEV_IS_GONE(pm8001_dev)        \
+       ((!pm8001_dev || (pm8001_dev->dev_type == NO_DEVICE)))
+static int pm8001_task_exec(struct sas_task *task, const int num,
+       gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
+{
+       struct domain_device *dev = task->dev;
+       struct pm8001_hba_info *pm8001_ha;
+       struct pm8001_device *pm8001_dev;
+       struct sas_task *t = task;
+       struct pm8001_ccb_info *ccb;
+       u32 tag = 0xdeadbeef, rc, n_elem = 0;
+       u32 n = num;
+       unsigned long flags = 0;
+
+       if (!dev->port) {
+               struct task_status_struct *tsm = &t->task_status;
+               tsm->resp = SAS_TASK_UNDELIVERED;
+               tsm->stat = SAS_PHY_DOWN;
+               if (dev->dev_type != SATA_DEV)
+                       t->task_done(t);
+               return 0;
+       }
+       pm8001_ha = pm8001_find_ha_by_dev(task->dev);
+       PM8001_IO_DBG(pm8001_ha, pm8001_printk("pm8001_task_exec device \n "));
+       spin_lock_irqsave(&pm8001_ha->lock, flags);
+       do {
+               dev = t->dev;
+               pm8001_dev = dev->lldd_dev;
+               if (DEV_IS_GONE(pm8001_dev)) {
+                       if (pm8001_dev) {
+                               PM8001_IO_DBG(pm8001_ha,
+                                       pm8001_printk("device %d not ready.\n",
+                                       pm8001_dev->device_id));
+                       } else {
+                               PM8001_IO_DBG(pm8001_ha,
+                                       pm8001_printk("device %016llx not "
+                                       "ready.\n", SAS_ADDR(dev->sas_addr)));
+                       }
+               rc = SAS_PHY_DOWN;
+                       goto out_done;
+               }
+               rc = pm8001_tag_alloc(pm8001_ha, &tag);
+               if (rc)
+                       goto err_out;
+               ccb = &pm8001_ha->ccb_info[tag];
+
+               if (!sas_protocol_ata(t->task_proto)) {
+                       if (t->num_scatter) {
+                               n_elem = dma_map_sg(pm8001_ha->dev,
+                                       t->scatter,
+                                       t->num_scatter,
+                                       t->data_dir);
+                               if (!n_elem) {
+                                       rc = -ENOMEM;
+                                       goto err_out;
+                               }
+                       }
+               } else {
+                       n_elem = t->num_scatter;
+               }
+
+               t->lldd_task = NULL;
+               ccb->n_elem = n_elem;
+               ccb->ccb_tag = tag;
+               ccb->task = t;
+               switch (t->task_proto) {
+               case SAS_PROTOCOL_SMP:
+                       rc = pm8001_task_prep_smp(pm8001_ha, ccb);
+                       break;
+               case SAS_PROTOCOL_SSP:
+                       if (is_tmf)
+                               rc = pm8001_task_prep_ssp_tm(pm8001_ha,
+                                       ccb, tmf);
+                       else
+                               rc = pm8001_task_prep_ssp(pm8001_ha, ccb);
+                       break;
+               case SAS_PROTOCOL_SATA:
+               case SAS_PROTOCOL_STP:
+               case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP:
+                       rc = pm8001_task_prep_ata(pm8001_ha, ccb);
+                       break;
+               default:
+                       dev_printk(KERN_ERR, pm8001_ha->dev,
+                               "unknown sas_task proto: 0x%x\n",
+                               t->task_proto);
+                       rc = -EINVAL;
+                       break;
+               }
+
+               if (rc) {
+                       PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk("rc is %x\n", rc));
+                       goto err_out_tag;
+               }
+               t->lldd_task = ccb;
+               /* TODO: select normal or high priority */
+               spin_lock(&t->task_state_lock);
+               t->task_state_flags |= SAS_TASK_AT_INITIATOR;
+               spin_unlock(&t->task_state_lock);
+               pm8001_dev->running_req++;
+               if (n > 1)
+                       t = list_entry(t->list.next, struct sas_task, list);
+       } while (--n);
+       rc = 0;
+       goto out_done;
+
+err_out_tag:
+       pm8001_tag_free(pm8001_ha, tag);
+err_out:
+       dev_printk(KERN_ERR, pm8001_ha->dev, "pm8001 exec failed[%d]!\n", rc);
+       if (!sas_protocol_ata(t->task_proto))
+               if (n_elem)
+                       dma_unmap_sg(pm8001_ha->dev, t->scatter, n_elem,
+                               t->data_dir);
+out_done:
+       spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+       return rc;
+}
+
+/**
+  * pm8001_queue_command - register for upper layer used, all IO commands sent
+  * to HBA are from this interface.
+  * @task: the task to be execute.
+  * @num: if can_queue great than 1, the task can be queued up. for SMP task,
+  * we always execute one one time
+  * @gfp_flags: gfp_flags
+  */
+int pm8001_queue_command(struct sas_task *task, const int num,
+               gfp_t gfp_flags)
+{
+       return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
+}
+
+void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx)
+{
+       pm8001_tag_clear(pm8001_ha, ccb_idx);
+}
+
+/**
+  * pm8001_ccb_task_free - free the sg for ssp and smp command, free the ccb.
+  * @pm8001_ha: our hba card information
+  * @ccb: the ccb which attached to ssp task
+  * @task: the task to be free.
+  * @ccb_idx: ccb index.
+  */
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+       struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx)
+{
+       if (!ccb->task)
+               return;
+       if (!sas_protocol_ata(task->task_proto))
+               if (ccb->n_elem)
+                       dma_unmap_sg(pm8001_ha->dev, task->scatter,
+                               task->num_scatter, task->data_dir);
+
+       switch (task->task_proto) {
+       case SAS_PROTOCOL_SMP:
+               dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_resp, 1,
+                       PCI_DMA_FROMDEVICE);
+               dma_unmap_sg(pm8001_ha->dev, &task->smp_task.smp_req, 1,
+                       PCI_DMA_TODEVICE);
+               break;
+
+       case SAS_PROTOCOL_SATA:
+       case SAS_PROTOCOL_STP:
+       case SAS_PROTOCOL_SSP:
+       default:
+               /* do nothing */
+               break;
+       }
+       task->lldd_task = NULL;
+       ccb->task = NULL;
+       ccb->ccb_tag = 0xFFFFFFFF;
+       pm8001_ccb_free(pm8001_ha, ccb_idx);
+}
+
+ /**
+  * pm8001_alloc_dev - find the empty pm8001_device structure, allocate and
+  * return it for use.
+  * @pm8001_ha: our hba card information
+  */
+struct pm8001_device *pm8001_alloc_dev(struct pm8001_hba_info *pm8001_ha)
+{
+       u32 dev;
+       for (dev = 0; dev < PM8001_MAX_DEVICES; dev++) {
+               if (pm8001_ha->devices[dev].dev_type == NO_DEVICE) {
+                       pm8001_ha->devices[dev].id = dev;
+                       return &pm8001_ha->devices[dev];
+               }
+       }
+       if (dev == PM8001_MAX_DEVICES) {
+               PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("max support %d devices, ignore ..\n",
+                       PM8001_MAX_DEVICES));
+       }
+       return NULL;
+}
+
+static void pm8001_free_dev(struct pm8001_device *pm8001_dev)
+{
+       u32 id = pm8001_dev->id;
+       memset(pm8001_dev, 0, sizeof(*pm8001_dev));
+       pm8001_dev->id = id;
+       pm8001_dev->dev_type = NO_DEVICE;
+       pm8001_dev->device_id = PM8001_MAX_DEVICES;
+       pm8001_dev->sas_device = NULL;
+}
+
+/**
+  * pm8001_dev_found_notify - when libsas find a sas domain device, it should
+  * tell the LLDD that device is found, and then LLDD register this device to
+  * HBA FW by the command "OPC_INB_REG_DEV", after that the HBA will assign
+  * a device ID(according to device's sas address) and returned it to LLDD.from
+  * now on, we communicate with HBA FW with the device ID which HBA assigned
+  * rather than sas address. it is the neccessary step for our HBA but it is
+  * the optional for other HBA driver.
+  * @dev: the device structure which sas layer used.
+  */
+static int pm8001_dev_found_notify(struct domain_device *dev)
+{
+       unsigned long flags = 0;
+       int res = 0;
+       struct pm8001_hba_info *pm8001_ha = NULL;
+       struct domain_device *parent_dev = dev->parent;
+       struct pm8001_device *pm8001_device;
+       DECLARE_COMPLETION_ONSTACK(completion);
+       u32 flag = 0;
+       pm8001_ha = pm8001_find_ha_by_dev(dev);
+       spin_lock_irqsave(&pm8001_ha->lock, flags);
+
+       pm8001_device = pm8001_alloc_dev(pm8001_ha);
+       pm8001_device->sas_device = dev;
+       if (!pm8001_device) {
+               res = -1;
+               goto found_out;
+       }
+       dev->lldd_dev = pm8001_device;
+       pm8001_device->dev_type = dev->dev_type;
+       pm8001_device->dcompletion = &completion;
+       if (parent_dev && DEV_IS_EXPANDER(parent_dev->dev_type)) {
+               int phy_id;
+               struct ex_phy *phy;
+               for (phy_id = 0; phy_id < parent_dev->ex_dev.num_phys;
+               phy_id++) {
+                       phy = &parent_dev->ex_dev.ex_phy[phy_id];
+                       if (SAS_ADDR(phy->attached_sas_addr)
+                               == SAS_ADDR(dev->sas_addr)) {
+                               pm8001_device->attached_phy = phy_id;
+                               break;
+                       }
+               }
+               if (phy_id == parent_dev->ex_dev.num_phys) {
+                       PM8001_FAIL_DBG(pm8001_ha,
+                       pm8001_printk("Error: no attached dev:%016llx"
+                       " at ex:%016llx.\n", SAS_ADDR(dev->sas_addr),
+                               SAS_ADDR(parent_dev->sas_addr)));
+                       res = -1;
+               }
+       } else {
+               if (dev->dev_type == SATA_DEV) {
+                       pm8001_device->attached_phy =
+                               dev->rphy->identify.phy_identifier;
+                               flag = 1; /* directly sata*/
+               }
+       } /*register this device to HBA*/
+       PM8001_DISC_DBG(pm8001_ha, pm8001_printk("Found device \n"));
+       PM8001_CHIP_DISP->reg_dev_req(pm8001_ha, pm8001_device, flag);
+       spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+       wait_for_completion(&completion);
+       if (dev->dev_type == SAS_END_DEV)
+               msleep(50);
+       pm8001_ha->flags = PM8001F_RUN_TIME ;
+       return 0;
+found_out:
+       spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+       return res;
+}
+
+int pm8001_dev_found(struct domain_device *dev)
+{
+       return pm8001_dev_found_notify(dev);
+}
+
+/**
+  * pm8001_alloc_task - allocate a task structure for TMF
+  */
+static struct sas_task *pm8001_alloc_task(void)
+{
+       struct sas_task *task = kzalloc(sizeof(*task), GFP_KERNEL);
+       if (task) {
+               INIT_LIST_HEAD(&task->list);
+               spin_lock_init(&task->task_state_lock);
+               task->task_state_flags = SAS_TASK_STATE_PENDING;
+               init_timer(&task->timer);
+               init_completion(&task->completion);
+       }
+       return task;
+}
+
+static void pm8001_free_task(struct sas_task *task)
+{
+       if (task) {
+               BUG_ON(!list_empty(&task->list));
+               kfree(task);
+       }
+}
+
+static void pm8001_task_done(struct sas_task *task)
+{
+       if (!del_timer(&task->timer))
+               return;
+       complete(&task->completion);
+}
+
+static void pm8001_tmf_timedout(unsigned long data)
+{
+       struct sas_task *task = (struct sas_task *)data;
+
+       task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+       complete(&task->completion);
+}
+
+#define PM8001_TASK_TIMEOUT 20
+/**
+  * pm8001_exec_internal_tmf_task - when errors or exception happened, we may
+  * want to do something, for example abort issued task which result in this
+  * execption, this is by calling this function, note it is also with the task
+  * execute interface.
+  * @dev: the wanted device.
+  * @tmf: which task management wanted to be take.
+  * @para_len: para_len.
+  * @parameter: ssp task parameter.
+  */
+static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
+       void *parameter, u32 para_len, struct pm8001_tmf_task *tmf)
+{
+       int res, retry;
+       struct sas_task *task = NULL;
+       struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+       for (retry = 0; retry < 3; retry++) {
+               task = pm8001_alloc_task();
+               if (!task)
+                       return -ENOMEM;
+
+               task->dev = dev;
+               task->task_proto = dev->tproto;
+               memcpy(&task->ssp_task, parameter, para_len);
+               task->task_done = pm8001_task_done;
+               task->timer.data = (unsigned long)task;
+               task->timer.function = pm8001_tmf_timedout;
+               task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+               add_timer(&task->timer);
+
+               res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
+
+               if (res) {
+                       del_timer(&task->timer);
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("Executing internal task "
+                               "failed\n"));
+                       goto ex_err;
+               }
+               wait_for_completion(&task->completion);
+               res = -TMF_RESP_FUNC_FAILED;
+               /* Even TMF timed out, return direct. */
+               if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+                       if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+                               PM8001_FAIL_DBG(pm8001_ha,
+                                       pm8001_printk("TMF task[%x]timeout.\n",
+                                       tmf->tmf));
+                               goto ex_err;
+                       }
+               }
+
+               if (task->task_status.resp == SAS_TASK_COMPLETE &&
+                       task->task_status.stat == SAM_GOOD) {
+                       res = TMF_RESP_FUNC_COMPLETE;
+                       break;
+               }
+
+               if (task->task_status.resp == SAS_TASK_COMPLETE &&
+               task->task_status.stat == SAS_DATA_UNDERRUN) {
+                       /* no error, but return the number of bytes of
+                       * underrun */
+                       res = task->task_status.residual;
+                       break;
+               }
+
+               if (task->task_status.resp == SAS_TASK_COMPLETE &&
+                       task->task_status.stat == SAS_DATA_OVERRUN) {
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("Blocked task error.\n"));
+                       res = -EMSGSIZE;
+                       break;
+               } else {
+                       PM8001_IO_DBG(pm8001_ha,
+                       pm8001_printk(" Task to dev %016llx response: 0x%x"
+                               "status 0x%x\n",
+                               SAS_ADDR(dev->sas_addr),
+                               task->task_status.resp,
+                               task->task_status.stat));
+                       pm8001_free_task(task);
+                       task = NULL;
+               }
+       }
+ex_err:
+       BUG_ON(retry == 3 && task != NULL);
+       if (task != NULL)
+               pm8001_free_task(task);
+       return res;
+}
+
+static int
+pm8001_exec_internal_task_abort(struct pm8001_hba_info *pm8001_ha,
+       struct pm8001_device *pm8001_dev, struct domain_device *dev, u32 flag,
+       u32 task_tag)
+{
+       int res, retry;
+       u32 rc, ccb_tag;
+       struct pm8001_ccb_info *ccb;
+       struct sas_task *task = NULL;
+
+       for (retry = 0; retry < 3; retry++) {
+               task = pm8001_alloc_task();
+               if (!task)
+                       return -ENOMEM;
+
+               task->dev = dev;
+               task->task_proto = dev->tproto;
+               task->task_done = pm8001_task_done;
+               task->timer.data = (unsigned long)task;
+               task->timer.function = pm8001_tmf_timedout;
+               task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
+               add_timer(&task->timer);
+
+               rc = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
+               if (rc)
+                       return rc;
+               ccb = &pm8001_ha->ccb_info[ccb_tag];
+               ccb->device = pm8001_dev;
+               ccb->ccb_tag = ccb_tag;
+               ccb->task = task;
+
+               res = PM8001_CHIP_DISP->task_abort(pm8001_ha,
+                       pm8001_dev, flag, task_tag, ccb_tag);
+
+               if (res) {
+                       del_timer(&task->timer);
+                       PM8001_FAIL_DBG(pm8001_ha,
+                               pm8001_printk("Executing internal task "
+                               "failed\n"));
+                       goto ex_err;
+               }
+               wait_for_completion(&task->completion);
+               res = TMF_RESP_FUNC_FAILED;
+               /* Even TMF timed out, return direct. */
+               if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
+                       if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
+                               PM8001_FAIL_DBG(pm8001_ha,
+                                       pm8001_printk("TMF task timeout.\n"));
+                               goto ex_err;
+                       }
+               }
+
+               if (task->task_status.resp == SAS_TASK_COMPLETE &&
+                       task->task_status.stat == SAM_GOOD) {
+                       res = TMF_RESP_FUNC_COMPLETE;
+                       break;
+
+               } else {
+                       PM8001_IO_DBG(pm8001_ha,
+                               pm8001_printk(" Task to dev %016llx response: "
+                                       "0x%x status 0x%x\n",
+                               SAS_ADDR(dev->sas_addr),
+                               task->task_status.resp,
+                               task->task_status.stat));
+                       pm8001_free_task(task);
+                       task = NULL;
+               }
+       }
+ex_err:
+       BUG_ON(retry == 3 && task != NULL);
+       if (task != NULL)
+               pm8001_free_task(task);
+       return res;
+}
+
+/**
+  * pm8001_dev_gone_notify - see the comments for "pm8001_dev_found_notify"
+  * @dev: the device structure which sas layer used.
+  */
+static void pm8001_dev_gone_notify(struct domain_device *dev)
+{
+       unsigned long flags = 0;
+       u32 tag;
+       struct pm8001_hba_info *pm8001_ha;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       u32 device_id = pm8001_dev->device_id;
+       pm8001_ha = pm8001_find_ha_by_dev(dev);
+       spin_lock_irqsave(&pm8001_ha->lock, flags);
+       pm8001_tag_alloc(pm8001_ha, &tag);
+       if (pm8001_dev) {
+               PM8001_DISC_DBG(pm8001_ha,
+                       pm8001_printk("found dev[%d:%x] is gone.\n",
+                       pm8001_dev->device_id, pm8001_dev->dev_type));
+               if (pm8001_dev->running_req) {
+                       spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+                       pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+                               dev, 1, 0);
+                       spin_lock_irqsave(&pm8001_ha->lock, flags);
+               }
+               PM8001_CHIP_DISP->dereg_dev_req(pm8001_ha, device_id);
+               pm8001_free_dev(pm8001_dev);
+       } else {
+               PM8001_DISC_DBG(pm8001_ha,
+                       pm8001_printk("Found dev has gone.\n"));
+       }
+       dev->lldd_dev = NULL;
+       spin_unlock_irqrestore(&pm8001_ha->lock, flags);
+}
+
+void pm8001_dev_gone(struct domain_device *dev)
+{
+       pm8001_dev_gone_notify(dev);
+}
+
+static int pm8001_issue_ssp_tmf(struct domain_device *dev,
+       u8 *lun, struct pm8001_tmf_task *tmf)
+{
+       struct sas_ssp_task ssp_task;
+       if (!(dev->tproto & SAS_PROTOCOL_SSP))
+               return TMF_RESP_FUNC_ESUPP;
+
+       strncpy((u8 *)&ssp_task.LUN, lun, 8);
+       return pm8001_exec_internal_tmf_task(dev, &ssp_task, sizeof(ssp_task),
+               tmf);
+}
+
+/**
+  * Standard mandates link reset for ATA  (type 0) and hard reset for
+  * SSP (type 1) , only for RECOVERY
+  */
+int pm8001_I_T_nexus_reset(struct domain_device *dev)
+{
+       int rc = TMF_RESP_FUNC_FAILED;
+       struct pm8001_device *pm8001_dev;
+       struct pm8001_hba_info *pm8001_ha;
+       struct sas_phy *phy;
+       if (!dev || !dev->lldd_dev)
+               return -1;
+
+       pm8001_dev = dev->lldd_dev;
+       pm8001_ha = pm8001_find_ha_by_dev(dev);
+       phy = sas_find_local_phy(dev);
+
+       if (dev_is_sata(dev)) {
+               DECLARE_COMPLETION_ONSTACK(completion_setstate);
+               rc = sas_phy_reset(phy, 1);
+               msleep(2000);
+               rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+                       dev, 1, 0);
+               pm8001_dev->setds_completion = &completion_setstate;
+               rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+                       pm8001_dev, 0x01);
+               wait_for_completion(&completion_setstate);
+       } else{
+       rc = sas_phy_reset(phy, 1);
+       msleep(2000);
+       }
+       PM8001_EH_DBG(pm8001_ha, pm8001_printk(" for device[%x]:rc=%d\n",
+               pm8001_dev->device_id, rc));
+       return rc;
+}
+
+/* mandatory SAM-3, the task reset the specified LUN*/
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun)
+{
+       int rc = TMF_RESP_FUNC_FAILED;
+       struct pm8001_tmf_task tmf_task;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+       if (dev_is_sata(dev)) {
+               struct sas_phy *phy = sas_find_local_phy(dev);
+               rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev ,
+                       dev, 1, 0);
+               rc = sas_phy_reset(phy, 1);
+               rc = PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+                       pm8001_dev, 0x01);
+               msleep(2000);
+       } else {
+               tmf_task.tmf = TMF_LU_RESET;
+               rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+       }
+       /* If failed, fall-through I_T_Nexus reset */
+       PM8001_EH_DBG(pm8001_ha, pm8001_printk("for device[%x]:rc=%d\n",
+               pm8001_dev->device_id, rc));
+       return rc;
+}
+
+/* optional SAM-3 */
+int pm8001_query_task(struct sas_task *task)
+{
+       u32 tag = 0xdeadbeef;
+       int i = 0;
+       struct scsi_lun lun;
+       struct pm8001_tmf_task tmf_task;
+       int rc = TMF_RESP_FUNC_FAILED;
+       if (unlikely(!task || !task->lldd_task || !task->dev))
+               return rc;
+
+       if (task->task_proto & SAS_PROTOCOL_SSP) {
+               struct scsi_cmnd *cmnd = task->uldd_task;
+               struct domain_device *dev = task->dev;
+               struct pm8001_hba_info *pm8001_ha =
+                       pm8001_find_ha_by_dev(dev);
+
+               int_to_scsilun(cmnd->device->lun, &lun);
+               rc = pm8001_find_tag(task, &tag);
+               if (rc == 0) {
+                       rc = TMF_RESP_FUNC_FAILED;
+                       return rc;
+               }
+               PM8001_EH_DBG(pm8001_ha, pm8001_printk("Query:["));
+               for (i = 0; i < 16; i++)
+                       printk(KERN_INFO "%02x ", cmnd->cmnd[i]);
+               printk(KERN_INFO "]\n");
+               tmf_task.tmf =  TMF_QUERY_TASK;
+               tmf_task.tag_of_task_to_be_managed = tag;
+
+               rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+               switch (rc) {
+               /* The task is still in Lun, release it then */
+               case TMF_RESP_FUNC_SUCC:
+                       PM8001_EH_DBG(pm8001_ha,
+                               pm8001_printk("The task is still in Lun \n"));
+               /* The task is not in Lun or failed, reset the phy */
+               case TMF_RESP_FUNC_FAILED:
+               case TMF_RESP_FUNC_COMPLETE:
+                       PM8001_EH_DBG(pm8001_ha,
+                       pm8001_printk("The task is not in Lun or failed,"
+                       " reset the phy \n"));
+                       break;
+               }
+       }
+       pm8001_printk(":rc= %d\n", rc);
+       return rc;
+}
+
+/*  mandatory SAM-3, still need free task/ccb info, abord the specified task */
+int pm8001_abort_task(struct sas_task *task)
+{
+       unsigned long flags;
+       u32 tag = 0xdeadbeef;
+       u32 device_id;
+       struct domain_device *dev ;
+       struct pm8001_hba_info *pm8001_ha = NULL;
+       struct pm8001_ccb_info *ccb;
+       struct scsi_lun lun;
+       struct pm8001_device *pm8001_dev;
+       struct pm8001_tmf_task tmf_task;
+       int rc = TMF_RESP_FUNC_FAILED;
+       if (unlikely(!task || !task->lldd_task || !task->dev))
+               return rc;
+       spin_lock_irqsave(&task->task_state_lock, flags);
+       if (task->task_state_flags & SAS_TASK_STATE_DONE) {
+               spin_unlock_irqrestore(&task->task_state_lock, flags);
+               rc = TMF_RESP_FUNC_COMPLETE;
+               goto out;
+       }
+       spin_unlock_irqrestore(&task->task_state_lock, flags);
+       if (task->task_proto & SAS_PROTOCOL_SSP) {
+               struct scsi_cmnd *cmnd = task->uldd_task;
+               dev = task->dev;
+               ccb = task->lldd_task;
+               pm8001_dev = dev->lldd_dev;
+               pm8001_ha = pm8001_find_ha_by_dev(dev);
+               int_to_scsilun(cmnd->device->lun, &lun);
+               rc = pm8001_find_tag(task, &tag);
+               if (rc == 0) {
+                       printk(KERN_INFO "No such tag in %s\n", __func__);
+                       rc = TMF_RESP_FUNC_FAILED;
+                       return rc;
+               }
+               device_id = pm8001_dev->device_id;
+               PM8001_EH_DBG(pm8001_ha,
+               pm8001_printk("abort io to device_id = %d\n", device_id));
+               tmf_task.tmf =  TMF_ABORT_TASK;
+               tmf_task.tag_of_task_to_be_managed = tag;
+               rc = pm8001_issue_ssp_tmf(dev, lun.scsi_lun, &tmf_task);
+               rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+                       pm8001_dev->sas_device, 0, tag);
+       } else if (task->task_proto & SAS_PROTOCOL_SATA ||
+               task->task_proto & SAS_PROTOCOL_STP) {
+               dev = task->dev;
+               pm8001_dev = dev->lldd_dev;
+               pm8001_ha = pm8001_find_ha_by_dev(dev);
+               rc = pm8001_find_tag(task, &tag);
+               if (rc == 0) {
+                       printk(KERN_INFO "No such tag in %s\n", __func__);
+                       rc = TMF_RESP_FUNC_FAILED;
+                       return rc;
+               }
+               rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+                       pm8001_dev->sas_device, 0, tag);
+       } else if (task->task_proto & SAS_PROTOCOL_SMP) {
+               /* SMP */
+               dev = task->dev;
+               pm8001_dev = dev->lldd_dev;
+               pm8001_ha = pm8001_find_ha_by_dev(dev);
+               rc = pm8001_find_tag(task, &tag);
+               if (rc == 0) {
+                       printk(KERN_INFO "No such tag in %s\n", __func__);
+                       rc = TMF_RESP_FUNC_FAILED;
+                       return rc;
+               }
+               rc = pm8001_exec_internal_task_abort(pm8001_ha, pm8001_dev,
+                       pm8001_dev->sas_device, 0, tag);
+
+       }
+out:
+       if (rc != TMF_RESP_FUNC_COMPLETE)
+               pm8001_printk("rc= %d\n", rc);
+       return rc;
+}
+
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun)
+{
+       int rc = TMF_RESP_FUNC_FAILED;
+       struct pm8001_tmf_task tmf_task;
+
+       tmf_task.tmf = TMF_ABORT_TASK_SET;
+       rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+       return rc;
+}
+
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun)
+{
+       int rc = TMF_RESP_FUNC_FAILED;
+       struct pm8001_tmf_task tmf_task;
+
+       tmf_task.tmf = TMF_CLEAR_ACA;
+       rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+
+       return rc;
+}
+
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun)
+{
+       int rc = TMF_RESP_FUNC_FAILED;
+       struct pm8001_tmf_task tmf_task;
+       struct pm8001_device *pm8001_dev = dev->lldd_dev;
+       struct pm8001_hba_info *pm8001_ha = pm8001_find_ha_by_dev(dev);
+
+       PM8001_EH_DBG(pm8001_ha,
+               pm8001_printk("I_T_L_Q clear task set[%x]\n",
+               pm8001_dev->device_id));
+       tmf_task.tmf = TMF_CLEAR_TASK_SET;
+       rc = pm8001_issue_ssp_tmf(dev, lun, &tmf_task);
+       return rc;
+}
+
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
new file mode 100644 (file)
index 0000000..14c676b
--- /dev/null
@@ -0,0 +1,480 @@
+/*
+ * PMC-Sierra SPC 8001 SAS/SATA based host adapters driver
+ *
+ * Copyright (c) 2008-2009 USI Co., Ltd.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ *
+ */
+
+#ifndef _PM8001_SAS_H_
+#define _PM8001_SAS_H_
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/dma-mapping.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/smp_lock.h>
+#include <scsi/libsas.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/sas_ata.h>
+#include <asm/atomic.h>
+#include "pm8001_defs.h"
+
+#define DRV_NAME               "pm8001"
+#define DRV_VERSION            "0.1.36"
+#define PM8001_FAIL_LOGGING    0x01 /* libsas EH function logging */
+#define PM8001_INIT_LOGGING    0x02 /* driver init logging */
+#define PM8001_DISC_LOGGING    0x04 /* discovery layer logging */
+#define PM8001_IO_LOGGING      0x08 /* I/O path logging */
+#define PM8001_EH_LOGGING      0x10 /* Error message logging */
+#define PM8001_IOCTL_LOGGING   0x20 /* IOCTL message logging */
+#define PM8001_MSG_LOGGING     0x40 /* misc message logging */
+#define pm8001_printk(format, arg...)  printk(KERN_INFO "%s %d:" format,\
+                               __func__, __LINE__, ## arg)
+#define PM8001_CHECK_LOGGING(HBA, LEVEL, CMD)  \
+do {                                           \
+       if (unlikely(HBA->logging_level & LEVEL))       \
+               do {                                    \
+                       CMD;                            \
+               } while (0);                            \
+} while (0);
+
+#define PM8001_EH_DBG(HBA, CMD)                        \
+       PM8001_CHECK_LOGGING(HBA, PM8001_EH_LOGGING, CMD)
+
+#define PM8001_INIT_DBG(HBA, CMD)              \
+       PM8001_CHECK_LOGGING(HBA, PM8001_INIT_LOGGING, CMD)
+
+#define PM8001_DISC_DBG(HBA, CMD)              \
+       PM8001_CHECK_LOGGING(HBA, PM8001_DISC_LOGGING, CMD)
+
+#define PM8001_IO_DBG(HBA, CMD)                \
+       PM8001_CHECK_LOGGING(HBA, PM8001_IO_LOGGING, CMD)
+
+#define PM8001_FAIL_DBG(HBA, CMD)              \
+       PM8001_CHECK_LOGGING(HBA, PM8001_FAIL_LOGGING, CMD)
+
+#define PM8001_IOCTL_DBG(HBA, CMD)             \
+       PM8001_CHECK_LOGGING(HBA, PM8001_IOCTL_LOGGING, CMD)
+
+#define PM8001_MSG_DBG(HBA, CMD)               \
+       PM8001_CHECK_LOGGING(HBA, PM8001_MSG_LOGGING, CMD)
+
+
+#define PM8001_USE_TASKLET
+#define PM8001_USE_MSIX
+
+
+#define DEV_IS_EXPANDER(type)  ((type == EDGE_DEV) || (type == FANOUT_DEV))
+
+#define PM8001_NAME_LENGTH             32/* generic length of strings */
+extern struct list_head hba_list;
+extern const struct pm8001_dispatch pm8001_8001_dispatch;
+
+struct pm8001_hba_info;
+struct pm8001_ccb_info;
+struct pm8001_device;
+struct pm8001_tmf_task;
+struct pm8001_dispatch {
+       char *name;
+       int (*chip_init)(struct pm8001_hba_info *pm8001_ha);
+       int (*chip_soft_rst)(struct pm8001_hba_info *pm8001_ha, u32 signature);
+       void (*chip_rst)(struct pm8001_hba_info *pm8001_ha);
+       int (*chip_ioremap)(struct pm8001_hba_info *pm8001_ha);
+       void (*chip_iounmap)(struct pm8001_hba_info *pm8001_ha);
+       void (*isr)(struct pm8001_hba_info *pm8001_ha);
+       u32 (*is_our_interupt)(struct pm8001_hba_info *pm8001_ha);
+       int (*isr_process_oq)(struct pm8001_hba_info *pm8001_ha);
+       void (*interrupt_enable)(struct pm8001_hba_info *pm8001_ha);
+       void (*interrupt_disable)(struct pm8001_hba_info *pm8001_ha);
+       void (*make_prd)(struct scatterlist *scatter, int nr, void *prd);
+       int (*smp_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_ccb_info *ccb);
+       int (*ssp_io_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_ccb_info *ccb);
+       int (*sata_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_ccb_info *ccb);
+       int (*phy_start_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+       int (*phy_stop_req)(struct pm8001_hba_info *pm8001_ha, u8 phy_id);
+       int (*reg_dev_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_device *pm8001_dev, u32 flag);
+       int (*dereg_dev_req)(struct pm8001_hba_info *pm8001_ha, u32 device_id);
+       int (*phy_ctl_req)(struct pm8001_hba_info *pm8001_ha,
+               u32 phy_id, u32 phy_op);
+       int (*task_abort)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_device *pm8001_dev, u8 flag, u32 task_tag,
+               u32 cmd_tag);
+       int (*ssp_tm_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_ccb_info *ccb, struct pm8001_tmf_task *tmf);
+       int (*get_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+       int (*set_nvmd_req)(struct pm8001_hba_info *pm8001_ha, void *payload);
+       int (*fw_flash_update_req)(struct pm8001_hba_info *pm8001_ha,
+               void *payload);
+       int (*set_dev_state_req)(struct pm8001_hba_info *pm8001_ha,
+               struct pm8001_device *pm8001_dev, u32 state);
+       int (*sas_diag_start_end_req)(struct pm8001_hba_info *pm8001_ha,
+               u32 state);
+       int (*sas_diag_execute_req)(struct pm8001_hba_info *pm8001_ha,
+               u32 state);
+};
+
+struct pm8001_chip_info {
+       u32     n_phy;
+       const struct pm8001_dispatch    *dispatch;
+};
+#define PM8001_CHIP_DISP       (pm8001_ha->chip->dispatch)
+
+struct pm8001_port {
+       struct asd_sas_port     sas_port;
+};
+
+struct pm8001_phy {
+       struct pm8001_hba_info  *pm8001_ha;
+       struct pm8001_port      *port;
+       struct asd_sas_phy      sas_phy;
+       struct sas_identify     identify;
+       struct scsi_device      *sdev;
+       u64                     dev_sas_addr;
+       u32                     phy_type;
+       struct completion       *enable_completion;
+       u32                     frame_rcvd_size;
+       u8                      frame_rcvd[32];
+       u8                      phy_attached;
+       u8                      phy_state;
+       enum sas_linkrate       minimum_linkrate;
+       enum sas_linkrate       maximum_linkrate;
+};
+
+struct pm8001_device {
+       enum sas_dev_type       dev_type;
+       struct domain_device    *sas_device;
+       u32                     attached_phy;
+       u32                     id;
+       struct completion       *dcompletion;
+       struct completion       *setds_completion;
+       u32                     device_id;
+       u32                     running_req;
+};
+
+struct pm8001_prd_imt {
+       __le32                  len;
+       __le32                  e;
+};
+
+struct pm8001_prd {
+       __le64                  addr;           /* 64-bit buffer address */
+       struct pm8001_prd_imt   im_len;         /* 64-bit length */
+} __attribute__ ((packed));
+/*
+ * CCB(Command Control Block)
+ */
+struct pm8001_ccb_info {
+       struct list_head        entry;
+       struct sas_task         *task;
+       u32                     n_elem;
+       u32                     ccb_tag;
+       dma_addr_t              ccb_dma_handle;
+       struct pm8001_device    *device;
+       struct pm8001_prd       buf_prd[PM8001_MAX_DMA_SG];
+       struct fw_control_ex    *fw_control_context;
+};
+
+struct mpi_mem {
+       void                    *virt_ptr;
+       dma_addr_t              phys_addr;
+       u32                     phys_addr_hi;
+       u32                     phys_addr_lo;
+       u32                     total_len;
+       u32                     num_elements;
+       u32                     element_size;
+       u32                     alignment;
+};
+
+struct mpi_mem_req {
+       /* The number of element in the  mpiMemory array */
+       u32                     count;
+       /* The array of structures that define memroy regions*/
+       struct mpi_mem          region[USI_MAX_MEMCNT];
+};
+
+struct main_cfg_table {
+       u32                     signature;
+       u32                     interface_rev;
+       u32                     firmware_rev;
+       u32                     max_out_io;
+       u32                     max_sgl;
+       u32                     ctrl_cap_flag;
+       u32                     gst_offset;
+       u32                     inbound_queue_offset;
+       u32                     outbound_queue_offset;
+       u32                     inbound_q_nppd_hppd;
+       u32                     outbound_hw_event_pid0_3;
+       u32                     outbound_hw_event_pid4_7;
+       u32                     outbound_ncq_event_pid0_3;
+       u32                     outbound_ncq_event_pid4_7;
+       u32                     outbound_tgt_ITNexus_event_pid0_3;
+       u32                     outbound_tgt_ITNexus_event_pid4_7;
+       u32                     outbound_tgt_ssp_event_pid0_3;
+       u32                     outbound_tgt_ssp_event_pid4_7;
+       u32                     outbound_tgt_smp_event_pid0_3;
+       u32                     outbound_tgt_smp_event_pid4_7;
+       u32                     upper_event_log_addr;
+       u32                     lower_event_log_addr;
+       u32                     event_log_size;
+       u32                     event_log_option;
+       u32                     upper_iop_event_log_addr;
+       u32                     lower_iop_event_log_addr;
+       u32                     iop_event_log_size;
+       u32                     iop_event_log_option;
+       u32                     fatal_err_interrupt;
+       u32                     fatal_err_dump_offset0;
+       u32                     fatal_err_dump_length0;
+       u32                     fatal_err_dump_offset1;
+       u32                     fatal_err_dump_length1;
+       u32                     hda_mode_flag;
+       u32                     anolog_setup_table_offset;
+};
+struct general_status_table {
+       u32                     gst_len_mpistate;
+       u32                     iq_freeze_state0;
+       u32                     iq_freeze_state1;
+       u32                     msgu_tcnt;
+       u32                     iop_tcnt;
+       u32                     reserved;
+       u32                     phy_state[8];
+       u32                     reserved1;
+       u32                     reserved2;
+       u32                     reserved3;
+       u32                     recover_err_info[8];
+};
+struct inbound_queue_table {
+       u32                     element_pri_size_cnt;
+       u32                     upper_base_addr;
+       u32                     lower_base_addr;
+       u32                     ci_upper_base_addr;
+       u32                     ci_lower_base_addr;
+       u32                     pi_pci_bar;
+       u32                     pi_offset;
+       u32                     total_length;
+       void                    *base_virt;
+       void                    *ci_virt;
+       u32                     reserved;
+       __le32                  consumer_index;
+       u32                     producer_idx;
+};
+struct outbound_queue_table {
+       u32                     element_size_cnt;
+       u32                     upper_base_addr;
+       u32                     lower_base_addr;
+       void                    *base_virt;
+       u32                     pi_upper_base_addr;
+       u32                     pi_lower_base_addr;
+       u32                     ci_pci_bar;
+       u32                     ci_offset;
+       u32                     total_length;
+       void                    *pi_virt;
+       u32                     interrup_vec_cnt_delay;
+       u32                     dinterrup_to_pci_offset;
+       __le32                  producer_index;
+       u32                     consumer_idx;
+};
+struct pm8001_hba_memspace {
+       void __iomem            *memvirtaddr;
+       u64                     membase;
+       u32                     memsize;
+};
+struct pm8001_hba_info {
+       char                    name[PM8001_NAME_LENGTH];
+       struct list_head        list;
+       unsigned long           flags;
+       spinlock_t              lock;/* host-wide lock */
+       struct pci_dev          *pdev;/* our device */
+       struct device           *dev;
+       struct pm8001_hba_memspace io_mem[6];
+       struct mpi_mem_req      memoryMap;
+       void __iomem    *msg_unit_tbl_addr;/*Message Unit Table Addr*/
+       void __iomem    *main_cfg_tbl_addr;/*Main Config Table Addr*/
+       void __iomem    *general_stat_tbl_addr;/*General Status Table Addr*/
+       void __iomem    *inbnd_q_tbl_addr;/*Inbound Queue Config Table Addr*/
+       void __iomem    *outbnd_q_tbl_addr;/*Outbound Queue Config Table Addr*/
+       struct main_cfg_table   main_cfg_tbl;
+       struct general_status_table     gs_tbl;
+       struct inbound_queue_table      inbnd_q_tbl[PM8001_MAX_INB_NUM];
+       struct outbound_queue_table     outbnd_q_tbl[PM8001_MAX_OUTB_NUM];
+       u8                      sas_addr[SAS_ADDR_SIZE];
+       struct sas_ha_struct    *sas;/* SCSI/SAS glue */
+       struct Scsi_Host        *shost;
+       u32                     chip_id;
+       const struct pm8001_chip_info   *chip;
+       struct completion       *nvmd_completion;
+       int                     tags_num;
+       unsigned long           *tags;
+       struct pm8001_phy       phy[PM8001_MAX_PHYS];
+       struct pm8001_port      port[PM8001_MAX_PHYS];
+       u32                     id;
+       u32                     irq;
+       struct pm8001_device    *devices;
+       struct pm8001_ccb_info  *ccb_info;
+#ifdef PM8001_USE_MSIX
+       struct msix_entry       msix_entries[16];/*for msi-x interrupt*/
+       int                     number_of_intr;/*will be used in remove()*/
+#endif
+#ifdef PM8001_USE_TASKLET
+       struct tasklet_struct   tasklet;
+#endif
+       struct list_head        wq_list;
+       u32                     logging_level;
+       u32                     fw_status;
+       const struct firmware   *fw_image;
+};
+
+struct pm8001_wq {
+       struct delayed_work work_q;
+       struct pm8001_hba_info *pm8001_ha;
+       void *data;
+       int handler;
+       struct list_head entry;
+};
+
+struct pm8001_fw_image_header {
+       u8 vender_id[8];
+       u8 product_id;
+       u8 hardware_rev;
+       u8 dest_partition;
+       u8 reserved;
+       u8 fw_rev[4];
+       __be32  image_length;
+       __be32 image_crc;
+       __be32 startup_entry;
+} __attribute__((packed, aligned(4)));
+
+/* define task management IU */
+struct pm8001_tmf_task {
+       u8      tmf;
+       u32     tag_of_task_to_be_managed;
+};
+/**
+ * FW Flash Update status values
+ */
+#define FLASH_UPDATE_COMPLETE_PENDING_REBOOT   0x00
+#define FLASH_UPDATE_IN_PROGRESS               0x01
+#define FLASH_UPDATE_HDR_ERR                   0x02
+#define FLASH_UPDATE_OFFSET_ERR                        0x03
+#define FLASH_UPDATE_CRC_ERR                   0x04
+#define FLASH_UPDATE_LENGTH_ERR                        0x05
+#define FLASH_UPDATE_HW_ERR                    0x06
+#define FLASH_UPDATE_DNLD_NOT_SUPPORTED                0x10
+#define FLASH_UPDATE_DISABLED                  0x11
+
+/**
+ * brief param structure for firmware flash update.
+ */
+struct fw_flash_updata_info {
+       u32                     cur_image_offset;
+       u32                     cur_image_len;
+       u32                     total_image_len;
+       struct pm8001_prd       sgl;
+};
+
+struct fw_control_info {
+       u32                     retcode;/*ret code (status)*/
+       u32                     phase;/*ret code phase*/
+       u32                     phaseCmplt;/*percent complete for the current
+       update phase */
+       u32                     version;/*Hex encoded firmware version number*/
+       u32                     offset;/*Used for downloading firmware  */
+       u32                     len; /*len of buffer*/
+       u32                     size;/* Used in OS VPD and Trace get size
+       operations.*/
+       u32                     reserved;/* padding required for 64 bit
+       alignment */
+       u8                      buffer[1];/* Start of buffer */
+};
+struct fw_control_ex {
+       struct fw_control_info *fw_control;
+       void                    *buffer;/* keep buffer pointer to be
+       freed when the responce comes*/
+       void                    *virtAddr;/* keep virtual address of the data */
+       void                    *usrAddr;/* keep virtual address of the
+       user data */
+       dma_addr_t              phys_addr;
+       u32                     len; /* len of buffer  */
+       void                    *payload; /* pointer to IOCTL Payload */
+       u8                      inProgress;/*if 1 - the IOCTL request is in
+       progress */
+       void                    *param1;
+       void                    *param2;
+       void                    *param3;
+};
+
+/******************** function prototype *********************/
+int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
+void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
+u32 pm8001_get_ncq_tag(struct sas_task *task, u32 *tag);
+void pm8001_ccb_free(struct pm8001_hba_info *pm8001_ha, u32 ccb_idx);
+void pm8001_ccb_task_free(struct pm8001_hba_info *pm8001_ha,
+       struct sas_task *task, struct pm8001_ccb_info *ccb, u32 ccb_idx);
+int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
+       void *funcdata);
+int pm8001_slave_alloc(struct scsi_device *scsi_dev);
+int pm8001_slave_configure(struct scsi_device *sdev);
+void pm8001_scan_start(struct Scsi_Host *shost);
+int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
+int pm8001_queue_command(struct sas_task *task, const int num,
+       gfp_t gfp_flags);
+int pm8001_abort_task(struct sas_task *task);
+int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
+int pm8001_clear_task_set(struct domain_device *dev, u8 *lun);
+int pm8001_dev_found(struct domain_device *dev);
+void pm8001_dev_gone(struct domain_device *dev);
+int pm8001_lu_reset(struct domain_device *dev, u8 *lun);
+int pm8001_I_T_nexus_reset(struct domain_device *dev);
+int pm8001_query_task(struct sas_task *task);
+int pm8001_mem_alloc(struct pci_dev *pdev, void **virt_addr,
+       dma_addr_t *pphys_addr, u32 *pphys_addr_hi, u32 *pphys_addr_lo,
+       u32 mem_size, u32 align);
+
+
+/* ctl shared API */
+extern struct device_attribute *pm8001_host_attrs[];
+
+#endif
+
index b0f0f3851cd4c704c8b14e57b74d209a6b5ecc47..161fadb291d155dedd606dcc9c86454bcd02007b 100644 (file)
 #define PCI_VENDOR_ID_COMPEX           0x11f6
 #define PCI_DEVICE_ID_COMPEX_ENET100VG4        0x0112
 
+#define PCI_VENDOR_ID_PMC_Sierra       0x11f8
+
 #define PCI_VENDOR_ID_RP               0x11fe
 #define PCI_DEVICE_ID_RP32INTF         0x0001
 #define PCI_DEVICE_ID_RP8INTF          0x0002