IP-Aliasing:
============
-IP-aliases are additional IP-addresses/masks hooked up to a base
-interface by adding a colon and a string when running ifconfig.
-This string is usually numeric, but this is not a must.
-
-IP-Aliases are avail if CONFIG_INET (`standard' IPv4 networking)
-is configured in the kernel.
+IP-aliases are an obsolete way to manage multiple IP-addresses/masks
+per interface. Newer tools such as iproute2 support multiple
+address/prefixes per interface, but aliases are still supported
+for backwards compatibility.
+An alias is formed by adding a colon and a string when running ifconfig.
+This string is usually numeric, but this is not a must.
o Alias creation.
Alias creation is done by 'magic' interface naming: eg. to create a
If the base device is shut down the added aliases will be deleted
too.
-
-
-Contact
--------
-Please finger or e-mail me:
- Juan Jose Ciarlante <jjciarla@raiz.uncu.edu.ar>
-
-Updated by Erik Schoenfelder <schoenfr@gaertner.DE>
-
-; local variables:
-; mode: indented-text
-; mode: auto-fill
-; end:
MAC80211
P: Johannes Berg
M: johannes@sipsolutions.net
-P: Michael Wu
-M: flamingice@sourmilk.net
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6.git
char e1000_driver_name[] = "e1000";
static char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver";
-#define DRV_VERSION "7.3.20-k3-NAPI"
+#define DRV_VERSION "7.3.21-k3-NAPI"
const char e1000_driver_version[] = DRV_VERSION;
static const char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
struct e1000_hw *hw = &adapter->hw;
u32 rctl, icr = er32(ICR);
- if (unlikely(!icr))
+ if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
return IRQ_NONE; /* Not our interrupt */
/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
if (NULL == new_bus)
return -ENOMEM;
+ device_init_wakeup(&ofdev->dev, 1);
+
new_bus->name = "Gianfar MII Bus",
new_bus->read = &gfar_mdio_read,
new_bus->write = &gfar_mdio_write,
#define MAX_CMD_DESCRIPTORS_HOST 1024
#define MAX_RCV_DESCRIPTORS_1G 2048
#define MAX_RCV_DESCRIPTORS_10G 4096
-#define MAX_JUMBO_RCV_DESCRIPTORS 512
+#define MAX_JUMBO_RCV_DESCRIPTORS 1024
#define MAX_LRO_RCV_DESCRIPTORS 8
#define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS
#define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS
}
for (i = 0; i < n; i++) {
if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
- netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0)
+ netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
+ kfree(buf);
return -EIO;
+ }
buf[i].addr = addr;
buf[i].data = val;
{
struct r6040_private *lp = netdev_priv(dev);
void __iomem *ioaddr = lp->base;
- struct pci_dev *pdev = lp->pdev;
int limit = 2048;
u16 *adrp;
u16 cmd;
break;
case SKFP_CLR_STATS: /* Zero out the driver statistics */
if (!capable(CAP_NET_ADMIN)) {
- memset(&lp->MacStat, 0, sizeof(lp->MacStat));
- } else {
status = -EPERM;
+ } else {
+ memset(&lp->MacStat, 0, sizeof(lp->MacStat));
}
break;
default:
do {
udelay(1);
val = smsc911x_reg_read(pdata, RX_DP_CTRL);
- } while (timeout-- && (val & RX_DP_CTRL_RX_FFWD_));
+ } while (--timeout && (val & RX_DP_CTRL_RX_FFWD_));
if (unlikely(timeout == 0))
SMSC_WARNING(HW, "Timed out waiting for "
/* test the IRQ connection to the ISR */
smsc_dbg(IFUP, "Testing ISR using IRQ %d", dev->irq);
+ pd->software_irq_signal = false;
spin_lock_irqsave(&pd->int_lock, flags);
/* configure interrupt deassertion timer and enable interrupts */
smsc9420_pci_flush_write(pd);
timeout = 1000;
- pd->software_irq_signal = false;
- smp_wmb();
while (timeout--) {
if (pd->software_irq_signal)
break;
Please refer to Documentation/DocBook/tulip-user.{pdf,ps,html}
for more information on this driver.
+
+ DC21143 manual "21143 PCI/CardBus 10/100Mb/s Ethernet LAN Controller
+ Hardware Reference Manual" is currently available at :
+ http://developer.intel.com/design/network/manuals/278074.htm
+
Please submit bugs to http://bugzilla.kernel.org/ .
*/
int csr12 = ioread32(ioaddr + CSR12);
int next_tick = 60*HZ;
int new_csr6 = 0;
+ int csr14 = ioread32(ioaddr + CSR14);
+ /* CSR12[LS10,LS100] are not reliable during autonegotiation */
+ if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+ csr12 |= 6;
if (tulip_debug > 2)
printk(KERN_INFO"%s: 21143 negotiation status %8.8x, %s.\n",
dev->name, csr12, medianame[dev->if_port]);
new_csr6 = 0x83860000;
dev->if_port = 3;
iowrite32(0, ioaddr + CSR13);
- iowrite32(0x0003FF7F, ioaddr + CSR14);
+ iowrite32(0x0003FFFF, ioaddr + CSR14);
iowrite16(8, ioaddr + CSR15);
iowrite32(1, ioaddr + CSR13);
}
struct tulip_private *tp = netdev_priv(dev);
void __iomem *ioaddr = tp->base_addr;
int csr12 = ioread32(ioaddr + CSR12);
+ int csr14 = ioread32(ioaddr + CSR14);
+ /* CSR12[LS10,LS100] are not reliable during autonegotiation */
+ if ((csr14 & 0x80) && (csr12 & 0x7000) != 0x5000)
+ csr12 |= 6;
if (tulip_debug > 1)
printk(KERN_INFO"%s: 21143 link status interrupt %8.8x, CSR5 %x, "
- "%8.8x.\n", dev->name, csr12, csr5, ioread32(ioaddr + CSR14));
+ "%8.8x.\n", dev->name, csr12, csr5, csr14);
/* If NWay finished and we have a negotiated partner capability. */
if (tp->nway && !tp->nwayset && (csr12 & 0x7000) == 0x5000) {
int negotiated = tp->sym_advertise & (csr12 >> 16);
tp->lpar = csr12 >> 16;
tp->nwayset = 1;
- if (negotiated & 0x0100) dev->if_port = 5;
+ /* If partner cannot negotiate, it is 10Mbps Half Duplex */
+ if (!(csr12 & 0x8000)) dev->if_port = 0;
+ else if (negotiated & 0x0100) dev->if_port = 5;
else if (negotiated & 0x0080) dev->if_port = 3;
else if (negotiated & 0x0040) dev->if_port = 4;
else if (negotiated & 0x0020) dev->if_port = 0;
tp->timer.expires = RUN_AT(3*HZ);
add_timer(&tp->timer);
} else if (dev->if_port == 5)
- iowrite32(ioread32(ioaddr + CSR14) & ~0x080, ioaddr + CSR14);
+ iowrite32(csr14 & ~0x080, ioaddr + CSR14);
} else if (dev->if_port == 0 || dev->if_port == 4) {
if ((csr12 & 4) == 0)
printk(KERN_INFO"%s: 21143 10baseT link beat good.\n",
static int init_phy(struct net_device *dev)
{
struct ucc_geth_private *priv = netdev_priv(dev);
+ struct device_node *np = priv->node;
+ struct device_node *phy, *mdio;
+ const phandle *ph;
+ char bus_name[MII_BUS_ID_SIZE];
+ const unsigned int *id;
struct phy_device *phydev;
char phy_id[BUS_ID_SIZE];
priv->oldspeed = 0;
priv->oldduplex = -1;
- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT, priv->ug_info->mdio_bus,
- priv->ug_info->phy_address);
+ ph = of_get_property(np, "phy-handle", NULL);
+ phy = of_find_node_by_phandle(*ph);
+ mdio = of_get_parent(phy);
+
+ id = of_get_property(phy, "reg", NULL);
+
+ of_node_put(phy);
+ of_node_put(mdio);
+
+ uec_mdio_bus_name(bus_name, mdio);
+ snprintf(phy_id, sizeof(phy_id), "%s:%02x",
+ bus_name, *id);
phydev = phy_connect(dev, phy_id, &adjust_link, 0, priv->phy_interface);
ugeth->ug_info = ug_info;
ugeth->dev = dev;
+ ugeth->node = np;
return 0;
}
int oldspeed;
int oldduplex;
int oldlink;
+
+ struct device_node *node;
};
void uec_set_ethtool_ops(struct net_device *netdev);
if (err)
goto reg_map_fail;
- snprintf(new_bus->id, MII_BUS_ID_SIZE, "%x", res.start);
+ uec_mdio_bus_name(new_bus->id, np);
new_bus->irq = kmalloc(32 * sizeof(int), GFP_KERNEL);
{
of_unregister_platform_driver(&uec_mdio_driver);
}
+
+void uec_mdio_bus_name(char *name, struct device_node *np)
+{
+ const u32 *reg;
+
+ reg = of_get_property(np, "reg", NULL);
+
+ snprintf(name, MII_BUS_ID_SIZE, "%s@%x", np->name, reg ? *reg : 0);
+}
+
int uec_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
int __init uec_mdio_init(void);
void uec_mdio_exit(void);
+void uec_mdio_bus_name(char *name, struct device_node *np);
#endif /* __UEC_MII_H */
skb_put(skb, MAX_PACKET_LEN);
hdr = skb_vnet_hdr(skb);
- sg_init_one(sg, hdr, sizeof(*hdr));
+ sg_set_buf(sg, hdr, sizeof(*hdr));
if (vi->big_packets) {
for (i = 0; i < MAX_SKB_FRAGS; i++) {
/* Encode metadata header at front. */
if (vi->mergeable_rx_bufs)
- sg_init_one(sg, mhdr, sizeof(*mhdr));
+ sg_set_buf(sg, mhdr, sizeof(*mhdr));
else
- sg_init_one(sg, hdr, sizeof(*hdr));
+ sg_set_buf(sg, hdr, sizeof(*hdr));
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
&fops_i2400m_reset);
}
-/*
- * Debug levels control; see debug.h
- */
-struct d_level D_LEVEL[] = {
- D_SUBMODULE_DEFINE(control),
- D_SUBMODULE_DEFINE(driver),
- D_SUBMODULE_DEFINE(debugfs),
- D_SUBMODULE_DEFINE(fw),
- D_SUBMODULE_DEFINE(netdev),
- D_SUBMODULE_DEFINE(rfkill),
- D_SUBMODULE_DEFINE(rx),
- D_SUBMODULE_DEFINE(tx),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
#define __debugfs_register(prefix, name, parent) \
do { \
EXPORT_SYMBOL_GPL(i2400m_release);
+/*
+ * Debug levels control; see debug.h
+ */
+struct d_level D_LEVEL[] = {
+ D_SUBMODULE_DEFINE(control),
+ D_SUBMODULE_DEFINE(driver),
+ D_SUBMODULE_DEFINE(debugfs),
+ D_SUBMODULE_DEFINE(fw),
+ D_SUBMODULE_DEFINE(netdev),
+ D_SUBMODULE_DEFINE(rfkill),
+ D_SUBMODULE_DEFINE(rx),
+ D_SUBMODULE_DEFINE(tx),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
static
int __init i2400m_driver_init(void)
{
* it's done by reseting the chip. To accomplish this we must
* first cleanup any pending DMA, then restart stuff after a la
* ath5k_init.
+ *
+ * Called with sc->lock.
*/
static int
ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
struct ath5k_softc *sc = hw->priv;
struct ieee80211_conf *conf = &hw->conf;
+ int ret;
+
+ mutex_lock(&sc->lock);
sc->bintval = conf->beacon_int;
sc->power_level = conf->power_level;
- return ath5k_chan_set(sc, conf->channel);
+ ret = ath5k_chan_set(sc, conf->channel);
+
+ mutex_unlock(&sc->lock);
+ return ret;
}
static int
priv->ucode_data_backup.len = data_size;
iwl_alloc_fw_desc(priv->pci_dev, &priv->ucode_data_backup);
+ if (!priv->ucode_code.v_addr || !priv->ucode_data.v_addr ||
+ !priv->ucode_data_backup.v_addr)
+ goto err_pci_alloc;
+
/* Initialization instructions and data */
if (init_size && init_data_size) {
priv->ucode_init.len = init_size;
ofdm_power = priv->channels[channel - 1].hw_value >> 4;
cck_power = min(cck_power, (u8)11);
- ofdm_power = min(ofdm_power, (u8)35);
+ if (ofdm_power > (u8)15)
+ ofdm_power = 25;
+ else
+ ofdm_power += 10;
rtl818x_iowrite8(priv, &priv->map->TX_GAIN_CCK,
rtl8225_tx_gain_cck_ofdm[cck_power / 6] >> 1);
cck_power += priv->txpwr_base & 0xF;
cck_power = min(cck_power, (u8)35);
- ofdm_power = min(ofdm_power, (u8)15);
+ if (ofdm_power > (u8)15)
+ ofdm_power = 25;
+ else
+ ofdm_power += 10;
ofdm_power += priv->txpwr_base >> 4;
ofdm_power = min(ofdm_power, (u8)35);
* cannot be fixed without breaking all existing apps.
*/
case TUNSETIFF:
+ case TUNGETIFF:
case SIOCGIFFLAGS:
case SIOCGIFMETRIC:
case SIOCGIFMTU:
COMPATIBLE_IOCTL(TUNSETDEBUG)
COMPATIBLE_IOCTL(TUNSETPERSIST)
COMPATIBLE_IOCTL(TUNSETOWNER)
+COMPATIBLE_IOCTL(TUNSETLINK)
+COMPATIBLE_IOCTL(TUNSETGROUP)
+COMPATIBLE_IOCTL(TUNGETFEATURES)
+COMPATIBLE_IOCTL(TUNSETOFFLOAD)
+COMPATIBLE_IOCTL(TUNSETTXFILTER)
/* Big V */
COMPATIBLE_IOCTL(VT_SETMODE)
COMPATIBLE_IOCTL(VT_GETMODE)
HANDLE_IOCTL(SIOCGIFTXQLEN, dev_ifsioc)
HANDLE_IOCTL(SIOCSIFTXQLEN, dev_ifsioc)
HANDLE_IOCTL(TUNSETIFF, dev_ifsioc)
+HANDLE_IOCTL(TUNGETIFF, dev_ifsioc)
HANDLE_IOCTL(SIOCETHTOOL, ethtool_ioctl)
HANDLE_IOCTL(SIOCBONDENSLAVE, bond_ioctl)
HANDLE_IOCTL(SIOCBONDRELEASE, bond_ioctl)
size = 2048;
if (nr_pcpus >= 32)
size = 4096;
- if (sizeof(rwlock_t) != 0) {
+ if (sizeof(spinlock_t) != 0) {
#ifdef CONFIG_NUMA
if (size * sizeof(spinlock_t) > PAGE_SIZE)
hashinfo->ehash_locks = vmalloc(size * sizeof(spinlock_t));
return 0;
next_skb:
- block_limit = skb_headlen(st->cur_skb);
+ block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
if (abs_offset < block_limit) {
- *data = st->cur_skb->data + abs_offset;
+ *data = st->cur_skb->data + (abs_offset - st->stepped_offset);
return block_limit - abs_offset;
}
st->frag_data = NULL;
}
- if (st->cur_skb->next) {
- st->cur_skb = st->cur_skb->next;
+ if (st->root_skb == st->cur_skb &&
+ skb_shinfo(st->root_skb)->frag_list) {
+ st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
st->frag_idx = 0;
goto next_skb;
- } else if (st->root_skb == st->cur_skb &&
- skb_shinfo(st->root_skb)->frag_list) {
- st->cur_skb = skb_shinfo(st->root_skb)->frag_list;
+ } else if (st->cur_skb->next) {
+ st->cur_skb = st->cur_skb->next;
+ st->frag_idx = 0;
goto next_skb;
}
static int __init ip_auto_config(void)
{
__be32 addr;
+#ifdef IPCONFIG_DYNAMIC
+ int retries = CONF_OPEN_RETRIES;
+#endif
#ifdef CONFIG_PROC_FS
proc_net_fops_create(&init_net, "pnp", S_IRUGO, &pnp_seq_fops);
#endif
ic_first_dev->next) {
#ifdef IPCONFIG_DYNAMIC
-
- int retries = CONF_OPEN_RETRIES;
-
if (ic_dynamic() < 0) {
ic_close_devs();
struct tcp_splice_state *tss = rd_desc->arg.data;
int ret;
- ret = skb_splice_bits(skb, offset, tss->pipe, rd_desc->count, tss->flags);
+ ret = skb_splice_bits(skb, offset, tss->pipe, min(rd_desc->count, len),
+ tss->flags);
if (ret > 0)
rd_desc->count -= ret;
return ret;
atomic_t udp_memory_allocated;
EXPORT_SYMBOL(udp_memory_allocated);
+#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+
static int udp_lib_lport_inuse(struct net *net, __u16 num,
const struct udp_hslot *hslot,
+ unsigned long *bitmap,
struct sock *sk,
int (*saddr_comp)(const struct sock *sk1,
const struct sock *sk2))
sk_nulls_for_each(sk2, node, &hslot->head)
if (net_eq(sock_net(sk2), net) &&
sk2 != sk &&
- sk2->sk_hash == num &&
+ (bitmap || sk2->sk_hash == num) &&
(!sk2->sk_reuse || !sk->sk_reuse) &&
(!sk2->sk_bound_dev_if || !sk->sk_bound_dev_if
|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
- (*saddr_comp)(sk, sk2))
- return 1;
+ (*saddr_comp)(sk, sk2)) {
+ if (bitmap)
+ __set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
+ bitmap);
+ else
+ return 1;
+ }
return 0;
}
if (!snum) {
int low, high, remaining;
unsigned rand;
- unsigned short first;
+ unsigned short first, last;
+ DECLARE_BITMAP(bitmap, PORTS_PER_CHAIN);
inet_get_local_port_range(&low, &high);
remaining = (high - low) + 1;
rand = net_random();
- snum = first = rand % remaining + low;
- rand |= 1;
- for (;;) {
- hslot = &udptable->hash[udp_hashfn(net, snum)];
+ first = (((u64)rand * remaining) >> 32) + low;
+ /*
+ * force rand to be an odd multiple of UDP_HTABLE_SIZE
+ */
+ rand = (rand | 1) * UDP_HTABLE_SIZE;
+ for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
+ hslot = &udptable->hash[udp_hashfn(net, first)];
+ bitmap_zero(bitmap, PORTS_PER_CHAIN);
spin_lock_bh(&hslot->lock);
- if (!udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
- break;
- spin_unlock_bh(&hslot->lock);
+ udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
+ saddr_comp);
+
+ snum = first;
+ /*
+ * Iterate on all possible values of snum for this hash.
+ * Using steps of an odd multiple of UDP_HTABLE_SIZE
+ * give us randomization and full range coverage.
+ */
do {
- snum = snum + rand;
- } while (snum < low || snum > high);
- if (snum == first)
- goto fail;
+ if (low <= snum && snum <= high &&
+ !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+ goto found;
+ snum += rand;
+ } while (snum != first);
+ spin_unlock_bh(&hslot->lock);
}
+ goto fail;
} else {
hslot = &udptable->hash[udp_hashfn(net, snum)];
spin_lock_bh(&hslot->lock);
- if (udp_lib_lport_inuse(net, snum, hslot, sk, saddr_comp))
+ if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
goto fail_unlock;
}
+found:
inet_sk(sk)->num = snum;
sk->sk_hash = snum;
if (sk_unhashed(sk)) {
.procname = "mc_forwarding",
.data = &ipv6_devconf.mc_forwarding,
.maxlen = sizeof(int),
- .mode = 0644,
+ .mode = 0444,
.proc_handler = proc_dointvec,
},
#endif
if (xfrm_decode_session_reverse(skb, &fl2, AF_INET6))
goto relookup_failed;
- if (ip6_dst_lookup(sk, &dst2, &fl))
+ if (ip6_dst_lookup(sk, &dst2, &fl2))
goto relookup_failed;
- err = xfrm_lookup(net, &dst2, &fl, sk, XFRM_LOOKUP_ICMP);
+ err = xfrm_lookup(net, &dst2, &fl2, sk, XFRM_LOOKUP_ICMP);
switch (err) {
case 0:
dst_release(dst);
* IPv6 multicast router mode is now supported ;)
*/
if (dev_net(skb->dev)->ipv6.devconf_all->mc_forwarding &&
+ !(ipv6_addr_type(&hdr->daddr) & IPV6_ADDR_LINKLOCAL) &&
likely(!(IP6CB(skb)->flags & IP6SKB_FORWARDED))) {
/*
* Okay, we try to forward - split and duplicate
}
if (skb2) {
- skb2->dev = skb2->dst->dev;
ip6_mr_input(skb2);
}
}
pim = (struct pimreghdr *)skb_transport_header(skb);
if (pim->type != ((PIM_VERSION << 4) | PIM_REGISTER) ||
(pim->flags & PIM_NULL_REGISTER) ||
- (ip_compute_csum((void *)pim, sizeof(*pim)) != 0 &&
+ (csum_ipv6_magic(&ipv6_hdr(skb)->saddr, &ipv6_hdr(skb)->daddr,
+ sizeof(*pim), IPPROTO_PIM,
+ csum_partial((void *)pim, sizeof(*pim), 0)) &&
csum_fold(skb_checksum(skb, 0, skb->len, 0))))
goto drop;
skb_pull(skb, (u8 *)encap - skb->data);
skb_reset_network_header(skb);
skb->dev = reg_dev;
- skb->protocol = htons(ETH_P_IP);
+ skb->protocol = htons(ETH_P_IPV6);
skb->ip_summed = 0;
skb->pkt_type = PACKET_HOST;
dst_release(skb->dst);
{
struct mif_device *v;
struct net_device *dev;
+ struct inet6_dev *in6_dev;
if (vifi < 0 || vifi >= net->ipv6.maxvif)
return -EADDRNOTAVAIL;
dev_set_allmulti(dev, -1);
+ in6_dev = __in6_dev_get(dev);
+ if (in6_dev)
+ in6_dev->cnf.mc_forwarding--;
+
if (v->flags & MIFF_REGISTER)
unregister_netdevice(dev);
int vifi = vifc->mif6c_mifi;
struct mif_device *v = &net->ipv6.vif6_table[vifi];
struct net_device *dev;
+ struct inet6_dev *in6_dev;
int err;
/* Is vif busy ? */
return -EINVAL;
}
+ in6_dev = __in6_dev_get(dev);
+ if (in6_dev)
+ in6_dev->cnf.mc_forwarding++;
+
/*
* Fill in the VIF structures
*/
skb->dst = dst_clone(pkt->dst);
skb->ip_summed = CHECKSUM_UNNECESSARY;
-
- skb_pull(skb, sizeof(struct ipv6hdr));
}
if (net->ipv6.mroute6_sk == NULL) {
rtnl_lock();
write_lock_bh(&mrt_lock);
- if (likely(net->ipv6.mroute6_sk == NULL))
+ if (likely(net->ipv6.mroute6_sk == NULL)) {
net->ipv6.mroute6_sk = sk;
+ net->ipv6.devconf_all->mc_forwarding++;
+ }
else
err = -EADDRINUSE;
write_unlock_bh(&mrt_lock);
if (sk == net->ipv6.mroute6_sk) {
write_lock_bh(&mrt_lock);
net->ipv6.mroute6_sk = NULL;
+ net->ipv6.devconf_all->mc_forwarding--;
write_unlock_bh(&mrt_lock);
mroute_clean_tables(net);
.proto = iph->nexthdr,
};
- if (rt6_need_strict(&iph->daddr))
+ if (rt6_need_strict(&iph->daddr) && skb->dev->type != ARPHRD_PIMREG)
flags |= RT6_LOOKUP_F_IFACE;
skb->dst = fib6_rule_lookup(net, &fl, flags, ip6_pol_route_input);
#include "debug-levels.h"
-/* Debug framework control of debug levels */
-struct d_level D_LEVEL[] = {
- D_SUBMODULE_DEFINE(debugfs),
- D_SUBMODULE_DEFINE(id_table),
- D_SUBMODULE_DEFINE(op_msg),
- D_SUBMODULE_DEFINE(op_reset),
- D_SUBMODULE_DEFINE(op_rfkill),
- D_SUBMODULE_DEFINE(stack),
-};
-size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
-
#define __debugfs_register(prefix, name, parent) \
do { \
result = d_level_register_debugfs(prefix, name, parent); \
}
EXPORT_SYMBOL_GPL(wimax_dev_rm);
+
+/* Debug framework control of debug levels */
+struct d_level D_LEVEL[] = {
+ D_SUBMODULE_DEFINE(debugfs),
+ D_SUBMODULE_DEFINE(id_table),
+ D_SUBMODULE_DEFINE(op_msg),
+ D_SUBMODULE_DEFINE(op_reset),
+ D_SUBMODULE_DEFINE(op_rfkill),
+ D_SUBMODULE_DEFINE(stack),
+};
+size_t D_LEVEL_SIZE = ARRAY_SIZE(D_LEVEL);
+
+
struct genl_family wimax_gnl_family = {
.id = GENL_ID_GENERATE,
.name = "WiMAX",
* calculate the number of reg rules we will need. We will need one
* for each channel subband */
while (country_ie_len >= 3) {
+ int end_channel = 0;
struct ieee80211_country_ie_triplet *triplet =
(struct ieee80211_country_ie_triplet *) country_ie;
int cur_sub_max_channel = 0, cur_channel = 0;
continue;
}
+ /* 2 GHz */
+ if (triplet->chans.first_channel <= 14)
+ end_channel = triplet->chans.first_channel +
+ triplet->chans.num_channels;
+ else
+ /*
+ * 5 GHz -- For example in country IEs if the first
+ * channel given is 36 and the number of channels is 4
+ * then the individual channel numbers defined for the
+ * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
+ * and not 36, 37, 38, 39.
+ *
+ * See: http://tinyurl.com/11d-clarification
+ */
+ end_channel = triplet->chans.first_channel +
+ (4 * (triplet->chans.num_channels - 1));
+
cur_channel = triplet->chans.first_channel;
- cur_sub_max_channel = ieee80211_channel_to_frequency(
- cur_channel + triplet->chans.num_channels);
+ cur_sub_max_channel = end_channel;
/* Basic sanity check */
if (cur_sub_max_channel < cur_channel)
end_channel = triplet->chans.first_channel +
triplet->chans.num_channels;
else
- /*
- * 5 GHz -- For example in country IEs if the first
- * channel given is 36 and the number of channels is 4
- * then the individual channel numbers defined for the
- * 5 GHz PHY by these parameters are: 36, 40, 44, and 48
- * and not 36, 37, 38, 39.
- *
- * See: http://tinyurl.com/11d-clarification
- */
end_channel = triplet->chans.first_channel +
(4 * (triplet->chans.num_channels - 1));
if (intersected_rd) {
printk(KERN_DEBUG "cfg80211: We intersect both of these "
"and get:\n");
- print_regdomain_info(rd);
+ print_regdomain_info(intersected_rd);
return;
}
printk(KERN_DEBUG "cfg80211: Intersection between both failed\n");
projects / linux-2.6-block.git / commitdiff