clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs

Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.

Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).

Fixes: 013804a727a0 ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

diff --git a/drivers/clk/qcom/gpucc-sm6350.c b/drivers/clk/qcom/gpucc-sm6350.c
index 35ed0500bc59319f9659aef81031b34d29fc06a4..ee89c42413f885f21f1470b1f7887d052e52a75e 100644 (file)
--- a/drivers/clk/qcom/gpucc-sm6350.c
+++ b/drivers/clk/qcom/gpucc-sm6350.c
@@ -413,6 +413,9 @@ static struct clk_branch gpu_cc_gx_vsense_clk = {
 static struct gdsc gpu_cx_gdsc = {
        .gdscr = 0x106c,
        .gds_hw_ctrl = 0x1540,
+       .en_rest_wait_val = 0x2,
+       .en_few_wait_val = 0x2,
+       .clk_dis_wait_val = 0x8,
        .pd = {
                .name = "gpu_cx_gdsc",
        },
@@ -423,6 +426,9 @@ static struct gdsc gpu_cx_gdsc = {
 static struct gdsc gpu_gx_gdsc = {
        .gdscr = 0x100c,
        .clamp_io_ctrl = 0x1508,
+       .en_rest_wait_val = 0x2,
+       .en_few_wait_val = 0x2,
+       .clk_dis_wait_val = 0x2,
        .pd = {
                .name = "gpu_gx_gdsc",
                .power_on = gdsc_gx_do_nothing_enable,