ixgbe: Add KR mode support for CS4227 chip
authorMark Rustad <mark.d.rustad@intel.com>
Mon, 28 Sep 2015 21:37:47 +0000 (14:37 -0700)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Mon, 23 Nov 2015 19:08:49 +0000 (11:08 -0800)
KR auto-neg mode is what we will be using going forward. The SW
interface for this mode is different that what was used for iXFI.

Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

index ebe0ac950b14e72a0d5dae2e51d3250c250846d1..005f01b80f4a0afc26a8889a35f4fa87adf157e5 100644 (file)
@@ -26,6 +26,8 @@
 #include "ixgbe_common.h"
 #include "ixgbe_phy.h"
 
+static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *, ixgbe_link_speed);
+
 static s32 ixgbe_get_invariants_X550_x(struct ixgbe_hw *hw)
 {
        struct ixgbe_mac_info *mac = &hw->mac;
@@ -1257,31 +1259,71 @@ ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
        if (status)
                return status;
 
-       /* Configure CS4227 LINE side to 10G SR. */
-       slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
-       value = IXGBE_CS4227_SPEED_10G;
-       status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
-                                                 value);
-
-       /* Configure CS4227 for HOST connection rate then type. */
-       slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
-       value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
-               IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
-       status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
-                                                 value);
+       if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) {
+               /* Configure CS4227 LINE side to 10G SR. */
+               slice = IXGBE_CS4227_LINE_SPARE22_MSB + (hw->bus.lan_id << 12);
+               value = IXGBE_CS4227_SPEED_10G;
+               status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+                                                         slice, value);
+               if (status)
+                       goto i2c_err;
 
-       slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
-       if (setup_linear)
-               value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
-       else
+               slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
                value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
-       status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227, slice,
-                                                 value);
+               status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+                                                         slice, value);
+               if (status)
+                       goto i2c_err;
+
+               /* Configure CS4227 for HOST connection rate then type. */
+               slice = IXGBE_CS4227_HOST_SPARE22_MSB + (hw->bus.lan_id << 12);
+               value = speed & IXGBE_LINK_SPEED_10GB_FULL ?
+                       IXGBE_CS4227_SPEED_10G : IXGBE_CS4227_SPEED_1G;
+               status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+                                                         slice, value);
+               if (status)
+                       goto i2c_err;
 
-       /* If internal link mode is XFI, then setup XFI internal link. */
-       if (!(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE))
+               slice = IXGBE_CS4227_HOST_SPARE24_LSB + (hw->bus.lan_id << 12);
+               if (setup_linear)
+                       value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
+               else
+                       value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
+               status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+                                                         slice, value);
+               if (status)
+                       goto i2c_err;
+
+               /* Setup XFI internal link. */
                status = ixgbe_setup_ixfi_x550em(hw, &speed);
+               if (status) {
+                       hw_dbg(hw, "setup_ixfi failed with %d\n", status);
+                       return status;
+               }
+       } else {
+               /* Configure internal PHY for KR/KX. */
+               status = ixgbe_setup_kr_speed_x550em(hw, speed);
+               if (status) {
+                       hw_dbg(hw, "setup_kr_speed failed with %d\n", status);
+                       return status;
+               }
 
+               /* Configure CS4227 LINE side to proper mode. */
+               slice = IXGBE_CS4227_LINE_SPARE24_LSB + (hw->bus.lan_id << 12);
+               if (setup_linear)
+                       value = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 1;
+               else
+                       value = (IXGBE_CS4227_EDC_MODE_SR << 1) | 1;
+               status = ixgbe_write_i2c_combined_generic(hw, IXGBE_CS4227,
+                                                         slice, value);
+               if (status)
+                       goto i2c_err;
+       }
+
+       return 0;
+
+i2c_err:
+       hw_dbg(hw, "combined i2c access failed with %d\n", status);
        return status;
 }
 
@@ -1982,12 +2024,9 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
                 * to determine internal PHY mode.
                 */
                phy->nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL);
-
-               /* If internal PHY mode is KR, then initialize KR link */
                if (phy->nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE) {
                        speed = IXGBE_LINK_SPEED_10GB_FULL |
                                IXGBE_LINK_SPEED_1GB_FULL;
-                       ret_val = ixgbe_setup_kr_speed_x550em(hw, speed);
                }
        }