ath9k: Program HW for WB195 diversity
authorSujith Manoharan <c_manoha@qca.qualcomm.com>
Sun, 4 Aug 2013 08:51:59 +0000 (14:21 +0530)
committerJohn W. Linville <linville@tuxdriver.com>
Mon, 5 Aug 2013 18:52:43 +0000 (14:52 -0400)
The MC_GAIN_CTL/CCK_DETECT registers have to be programmed
with the correct configuration values if WLAN/BT RX diversity
is enabled. Add this and also take care of the BTCOEX mode
when fast diversity is enabled/disabled.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath9k/ar9002_phy.c
drivers/net/wireless/ath/ath9k/ar9002_phy.h

index f4003512d8d57e223c59fc10477ad9f99d262ede..456d8b9173964d38e92aec172814a7902d194125 100644 (file)
@@ -555,6 +555,65 @@ static void ar9002_hw_antdiv_comb_conf_set(struct ath_hw *ah,
        REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
 }
 
+static void ar9002_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable)
+{
+       struct ath_btcoex_hw *btcoex = &ah->btcoex_hw;
+       u8 antdiv_ctrl1, antdiv_ctrl2;
+       u32 regval;
+
+       if (enable) {
+               antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE;
+               antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE;
+
+               /*
+                * Don't disable BT ant to allow BB to control SWCOM.
+                */
+               btcoex->bt_coex_mode2 &= (~(AR_BT_DISABLE_BT_ANT));
+               REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2);
+
+               REG_WRITE(ah, AR_PHY_SWITCH_COM, ATH_BT_COEX_ANT_DIV_SWITCH_COM);
+               REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
+       } else {
+               /*
+                * Disable antenna diversity, use LNA1 only.
+                */
+               antdiv_ctrl1 = ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A;
+               antdiv_ctrl2 = ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A;
+
+               /*
+                * Disable BT Ant. to allow concurrent BT and WLAN receive.
+                */
+               btcoex->bt_coex_mode2 |= AR_BT_DISABLE_BT_ANT;
+               REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex->bt_coex_mode2);
+
+               /*
+                * Program SWCOM table to make sure RF switch always parks
+                * at BT side.
+                */
+               REG_WRITE(ah, AR_PHY_SWITCH_COM, 0);
+               REG_RMW(ah, AR_PHY_SWITCH_CHAIN_0, 0, 0xf0000000);
+       }
+
+       regval = REG_READ(ah, AR_PHY_MULTICHAIN_GAIN_CTL);
+       regval &= (~(AR_PHY_9285_ANT_DIV_CTL_ALL));
+        /*
+        * Clear ant_fast_div_bias [14:9] since for WB195,
+        * the main LNA is always LNA1.
+        */
+       regval &= (~(AR_PHY_9285_FAST_DIV_BIAS));
+       regval |= SM(antdiv_ctrl1, AR_PHY_9285_ANT_DIV_CTL);
+       regval |= SM(antdiv_ctrl2, AR_PHY_9285_ANT_DIV_ALT_LNACONF);
+       regval |= SM((antdiv_ctrl2 >> 2), AR_PHY_9285_ANT_DIV_MAIN_LNACONF);
+       regval |= SM((antdiv_ctrl1 >> 1), AR_PHY_9285_ANT_DIV_ALT_GAINTB);
+       regval |= SM((antdiv_ctrl1 >> 2), AR_PHY_9285_ANT_DIV_MAIN_GAINTB);
+       REG_WRITE(ah, AR_PHY_MULTICHAIN_GAIN_CTL, regval);
+
+       regval = REG_READ(ah, AR_PHY_CCK_DETECT);
+       regval &= (~AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+       regval |= SM((antdiv_ctrl1 >> 3), AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV);
+       REG_WRITE(ah, AR_PHY_CCK_DETECT, regval);
+}
+
 static void ar9002_hw_spectral_scan_config(struct ath_hw *ah,
                                    struct ath_spec_scan *param)
 {
@@ -630,6 +689,7 @@ void ar9002_hw_attach_phy_ops(struct ath_hw *ah)
 
        ops->antdiv_comb_conf_get = ar9002_hw_antdiv_comb_conf_get;
        ops->antdiv_comb_conf_set = ar9002_hw_antdiv_comb_conf_set;
+       ops->set_bt_ant_diversity = ar9002_hw_set_bt_ant_diversity;
        ops->spectral_scan_config = ar9002_hw_spectral_scan_config;
        ops->spectral_scan_trigger = ar9002_hw_spectral_scan_trigger;
        ops->spectral_scan_wait = ar9002_hw_spectral_scan_wait;
index d3f09287d1d0e0e61c4899bdca72d44aa26862c1..6314ae2e93e34d0523b763031230bed4943244b7 100644 (file)
 #define AR_PHY_9285_ANT_DIV_GAINTB_0        0
 #define AR_PHY_9285_ANT_DIV_GAINTB_1        1
 
+#define ATH_BT_COEX_ANTDIV_CONTROL1_ENABLE  0x0b
+#define ATH_BT_COEX_ANTDIV_CONTROL2_ENABLE  0x09
+#define ATH_BT_COEX_ANTDIV_CONTROL1_FIXED_A 0x04
+#define ATH_BT_COEX_ANTDIV_CONTROL2_FIXED_A 0x09
+#define ATH_BT_COEX_ANT_DIV_SWITCH_COM      0x66666666
+
 #define AR_PHY_EXT_CCA0             0x99b8
 #define AR_PHY_EXT_CCA0_THRESH62    0x000000FF
 #define AR_PHY_EXT_CCA0_THRESH62_S  0