/* PCI ID lookup table
*/
static const struct pci_device_id fst_pci_dev_id[] = {
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2P, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_T2P},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4P, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_T4P},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T1U, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_T1U},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T2U, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_T2U},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_T4U, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_T4U},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
- {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID,
+ {PCI_VENDOR_ID_FARSITE, PCI_DEVICE_ID_FARSITE_TE1C, PCI_ANY_ID,
PCI_ANY_ID, 0, 0, FST_TYPE_TE1},
{0,} /* End */
};
/* Device Driver Work Queues
*
- * So that we don't spend too much time processing events in the
- * Interrupt Service routine, we will declare a work queue per Card
+ * So that we don't spend too much time processing events in the
+ * Interrupt Service routine, we will declare a work queue per Card
* and make the ISR schedule a task in the queue for later execution.
* In the 2.4 Kernel we used to use the immediate queue for BH's
- * Now that they are gone, tasklets seem to be much better than work
+ * Now that they are gone, tasklets seem to be much better than work
* queues.
*/
pi = port->index;
/* Discard buffer descriptors until we see the start of the
* next frame. Note that for long frames this could be in
- * a subsequent interrupt.
+ * a subsequent interrupt.
*/
i = 0;
while ((dmabits & (DMA_OWN | RX_STP)) == 0) {
/* It is possible to really be running, i.e. we have re-loaded
* a running card
- * Clear and reprime the interrupt source
+ * Clear and reprime the interrupt source
*/
fst_clear_intr(card);
return IRQ_HANDLED;
int err;
unsigned char my_framing;
- /* Set things according to the user set valid flags
- * Several of the old options have been invalidated/replaced by the
+ /* Set things according to the user set valid flags
+ * Several of the old options have been invalidated/replaced by the
* generic hdlc package.
*/
err = 0;
info->smcFirmwareVersion = FST_RDL(card, smcFirmwareVersion);
/* The T2U can report cable presence for both A or B
- * in bits 0 and 1 of cableStatus. See which port we are and
+ * in bits 0 and 1 of cableStatus. See which port we are and
* do the mapping.
*/
if (card->family == FST_FAMILY_TXU) {