dt-bindings: display: panel: Rename WL-355608-A8 panel to rg35xx-*-panel

The WL-355608-A8 is a 3.5" 640x480@60Hz RGB LCD display from an unknown
OEM used in a number of handheld gaming devices made by Anbernic.
Previously committed using the OEM serial without a vendor prefix,
however following subsequent discussion the preference is to use the
integrating device vendor and name where the OEM is unknown.

There are 4 RG35XX series devices from Anbernic based on an Allwinner
H700 SoC using this panel, with the -Plus variant introduced first.
Therefore the -Plus is used as the fallback for the subsequent -H,
-2024, and -SP devices.

Alter the filename and compatible string to reflect the convention.

Fixes: 45b888a8980a ("dt-bindings: display: panel: Add WL-355608-A8 panel")
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240904012456.35429-2-ryan@testtoast.com

diff --git a/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
new file mode 100644 (file)
index 0000000..1d67492
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/anbernic,rg35xx-plus-panel.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/anbernic,rg35xx-plus-panel.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Anbernic RG35XX series (WL-355608-A8) 3.5" 640x480 24-bit IPS LCD panel
+
+maintainers:
+  - Ryan Walklin <ryan@testtoast.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - const: anbernic,rg35xx-plus-panel
+      - items:
+          - enum:
+              - anbernic,rg35xx-2024-panel
+              - anbernic,rg35xx-h-panel
+              - anbernic,rg35xx-sp-panel
+          - const: anbernic,rg35xx-plus-panel
+
+  reg:
+    maxItems: 1
+
+  spi-3wire: true
+
+required:
+  - compatible
+  - reg
+  - port
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "anbernic,rg35xx-plus-panel";
+            reg = <0>;
+
+            spi-3wire;
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
+
+            backlight = <&backlight>;
+            power-supply = <&reg_lcd>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&tcon_lcd0_out_lcd>;
+                };
+            };
+        };
+    };

diff --git a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml b/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
deleted file mode 100644 (file)
index e552d01..0000000
--- a/Documentation/devicetree/bindings/display/panel/wl-355608-a8.yaml
+++ /dev/null
@@ -1,60 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/display/panel/wl-355608-a8.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: WL-355608-A8 3.5" (640x480 pixels) 24-bit IPS LCD panel
-
-maintainers:
-  - Ryan Walklin <ryan@testtoast.com>
-
-allOf:
-  - $ref: panel-common.yaml#
-  - $ref: /schemas/spi/spi-peripheral-props.yaml#
-
-properties:
-  compatible:
-    const: wl-355608-a8
-
-  reg:
-    maxItems: 1
-
-  spi-3wire: true
-
-required:
-  - compatible
-  - reg
-  - port
-  - power-supply
-  - reset-gpios
-
-unevaluatedProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/gpio/gpio.h>
-
-    spi {
-        #address-cells = <1>;
-        #size-cells = <0>;
-
-        panel@0 {
-            compatible = "wl-355608-a8";
-            reg = <0>;
-
-            spi-3wire;
-            spi-max-frequency = <3125000>;
-
-            reset-gpios = <&pio 8 14 GPIO_ACTIVE_LOW>; // PI14
-
-            backlight = <&backlight>;
-            power-supply = <&reg_lcd>;
-
-            port {
-                endpoint {
-                    remote-endpoint = <&tcon_lcd0_out_lcd>;
-                };
-            };
-        };
-    };