drm/rockchip: direct config connecter gate and out_mode
authorMark Yao <mark.yao@rock-chips.com>
Wed, 16 Dec 2015 10:11:24 +0000 (18:11 +0800)
committerMark Yao <mark.yao@rock-chips.com>
Mon, 28 Dec 2015 00:50:02 +0000 (08:50 +0800)
Both connecter gate and out_mode are not conflict with mode set
configure. Direct setting connecter gate and out_mode, that allow
connector do rockchip_drm_crtc_mode_config after mode set.

Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
drivers/gpu/drm/rockchip/rockchip_drm_vop.c

index 9ace3ae1081981b703b79d54581611a534a6017d..6ded4cca02833aab3449aba0553ef23eb090f357 100644 (file)
@@ -89,9 +89,6 @@ struct vop {
        struct drm_device *drm_dev;
        bool is_enabled;
 
-       int connector_type;
-       int connector_out_mode;
-
        /* mutex vsync_ work */
        struct mutex vsync_mutex;
        bool vsync_work_pending;
@@ -1018,8 +1015,24 @@ int rockchip_drm_crtc_mode_config(struct drm_crtc *crtc,
 {
        struct vop *vop = to_vop(crtc);
 
-       vop->connector_type = connector_type;
-       vop->connector_out_mode = out_mode;
+       if (WARN_ON(!vop->is_enabled))
+               return -EINVAL;
+
+       switch (connector_type) {
+       case DRM_MODE_CONNECTOR_LVDS:
+               VOP_CTRL_SET(vop, rgb_en, 1);
+               break;
+       case DRM_MODE_CONNECTOR_eDP:
+               VOP_CTRL_SET(vop, edp_en, 1);
+               break;
+       case DRM_MODE_CONNECTOR_HDMIA:
+               VOP_CTRL_SET(vop, hdmi_en, 1);
+               break;
+       default:
+               DRM_ERROR("unsupport connector_type[%d]\n", connector_type);
+               return -EINVAL;
+       };
+       VOP_CTRL_SET(vop, out_mode, out_mode);
 
        return 0;
 }
@@ -1132,22 +1145,6 @@ static void vop_crtc_enable(struct drm_crtc *crtc)
                vop_dsp_hold_valid_irq_disable(vop);
        }
 
-       switch (vop->connector_type) {
-       case DRM_MODE_CONNECTOR_LVDS:
-               VOP_CTRL_SET(vop, rgb_en, 1);
-               break;
-       case DRM_MODE_CONNECTOR_eDP:
-               VOP_CTRL_SET(vop, edp_en, 1);
-               break;
-       case DRM_MODE_CONNECTOR_HDMIA:
-               VOP_CTRL_SET(vop, hdmi_en, 1);
-               break;
-       default:
-               DRM_ERROR("unsupport connector_type[%d]\n",
-                         vop->connector_type);
-       };
-       VOP_CTRL_SET(vop, out_mode, vop->connector_out_mode);
-
        val = 0x8;
        val |= (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) ? 0 : 1;
        val |= (adjusted_mode->flags & DRM_MODE_FLAG_NVSYNC) ? 0 : (1 << 1);