powerpc: Remove common stuff from setup_64.c
authorPaul Mackerras <paulus@samba.org>
Thu, 27 Oct 2005 01:08:31 +0000 (11:08 +1000)
committerPaul Mackerras <paulus@samba.org>
Thu, 27 Oct 2005 01:08:31 +0000 (11:08 +1000)
This should have been in commit 03501dab035ab7da5e1373f5e130cfd6346d3f21
but got missed by accident.

Signed-off-by: Paul Mackerras <paulus@samba.org>
arch/powerpc/kernel/setup_64.c

index 0312422881aed00fda295f24b6595899442b648d..9cdf294e76f67b450dd29baf0ec2fa45b595929a 100644 (file)
@@ -138,23 +138,6 @@ static struct notifier_block ppc64_panic_block = {
        .priority = INT_MIN /* may not return; must be done last */
 };
 
-/*
- * Perhaps we can put the pmac screen_info[] here
- * on pmac as well so we don't need the ifdef's.
- * Until we get multiple-console support in here
- * that is.  -- Cort
- * Maybe tie it to serial consoles, since this is really what
- * these processors use on existing boards.  -- Dan
- */ 
-struct screen_info screen_info = {
-       .orig_x = 0,
-       .orig_y = 25,
-       .orig_video_cols = 80,
-       .orig_video_lines = 25,
-       .orig_video_isVGA = 1,
-       .orig_video_points = 16
-};
-
 #ifdef CONFIG_SMP
 
 static int smt_enabled_cmdline;
@@ -641,51 +624,6 @@ void __init setup_system(void)
        DBG(" <- setup_system()\n");
 }
 
-/* also used by kexec */
-void machine_shutdown(void)
-{
-       if (ppc_md.nvram_sync)
-               ppc_md.nvram_sync();
-}
-
-void machine_restart(char *cmd)
-{
-       machine_shutdown();
-       ppc_md.restart(cmd);
-#ifdef CONFIG_SMP
-       smp_send_stop();
-#endif
-       printk(KERN_EMERG "System Halted, OK to turn off power\n");
-       local_irq_disable();
-       while (1) ;
-}
-
-void machine_power_off(void)
-{
-       machine_shutdown();
-       ppc_md.power_off();
-#ifdef CONFIG_SMP
-       smp_send_stop();
-#endif
-       printk(KERN_EMERG "System Halted, OK to turn off power\n");
-       local_irq_disable();
-       while (1) ;
-}
-/* Used by the G5 thermal driver */
-EXPORT_SYMBOL_GPL(machine_power_off);
-
-void machine_halt(void)
-{
-       machine_shutdown();
-       ppc_md.halt();
-#ifdef CONFIG_SMP
-       smp_send_stop();
-#endif
-       printk(KERN_EMERG "System Halted, OK to turn off power\n");
-       local_irq_disable();
-       while (1) ;
-}
-
 static int ppc64_panic_event(struct notifier_block *this,
                              unsigned long event, void *ptr)
 {
@@ -693,90 +631,6 @@ static int ppc64_panic_event(struct notifier_block *this,
        return NOTIFY_DONE;
 }
 
-
-#ifdef CONFIG_SMP
-DEFINE_PER_CPU(unsigned int, pvr);
-#endif
-
-static int show_cpuinfo(struct seq_file *m, void *v)
-{
-       unsigned long cpu_id = (unsigned long)v - 1;
-       unsigned int pvr;
-       unsigned short maj;
-       unsigned short min;
-
-       if (cpu_id == NR_CPUS) {
-               seq_printf(m, "timebase\t: %lu\n", ppc_tb_freq);
-
-               if (ppc_md.show_cpuinfo != NULL)
-                       ppc_md.show_cpuinfo(m);
-
-               return 0;
-       }
-
-       /* We only show online cpus: disable preempt (overzealous, I
-        * knew) to prevent cpu going down. */
-       preempt_disable();
-       if (!cpu_online(cpu_id)) {
-               preempt_enable();
-               return 0;
-       }
-
-#ifdef CONFIG_SMP
-       pvr = per_cpu(pvr, cpu_id);
-#else
-       pvr = mfspr(SPRN_PVR);
-#endif
-       maj = (pvr >> 8) & 0xFF;
-       min = pvr & 0xFF;
-
-       seq_printf(m, "processor\t: %lu\n", cpu_id);
-       seq_printf(m, "cpu\t\t: ");
-
-       if (cur_cpu_spec->pvr_mask)
-               seq_printf(m, "%s", cur_cpu_spec->cpu_name);
-       else
-               seq_printf(m, "unknown (%08x)", pvr);
-
-#ifdef CONFIG_ALTIVEC
-       if (cpu_has_feature(CPU_FTR_ALTIVEC))
-               seq_printf(m, ", altivec supported");
-#endif /* CONFIG_ALTIVEC */
-
-       seq_printf(m, "\n");
-
-       /*
-        * Assume here that all clock rates are the same in a
-        * smp system.  -- Cort
-        */
-       seq_printf(m, "clock\t\t: %lu.%06luMHz\n", ppc_proc_freq / 1000000,
-                  ppc_proc_freq % 1000000);
-
-       seq_printf(m, "revision\t: %hd.%hd\n\n", maj, min);
-
-       preempt_enable();
-       return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
-       return *pos <= NR_CPUS ? (void *)((*pos)+1) : NULL;
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
-       ++*pos;
-       return c_start(m, pos);
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
-       .start =c_start,
-       .next = c_next,
-       .stop = c_stop,
-       .show = show_cpuinfo,
-};
-
 /*
  * These three variables are used to save values passed to us by prom_init()
  * via the device tree. The TCE variables are needed because with a memory_limit
@@ -803,130 +657,6 @@ static int __init early_parsemem(char *p)
 early_param("mem", early_parsemem);
 #endif /* CONFIG_PPC_ISERIES */
 
-#ifdef CONFIG_PPC_MULTIPLATFORM
-static int __init set_preferred_console(void)
-{
-       struct device_node *prom_stdout = NULL;
-       char *name;
-       u32 *spd;
-       int offset = 0;
-
-       DBG(" -> set_preferred_console()\n");
-
-       /* The user has requested a console so this is already set up. */
-       if (strstr(saved_command_line, "console=")) {
-               DBG(" console was specified !\n");
-               return -EBUSY;
-       }
-
-       if (!of_chosen) {
-               DBG(" of_chosen is NULL !\n");
-               return -ENODEV;
-       }
-       /* We are getting a weird phandle from OF ... */
-       /* ... So use the full path instead */
-       name = (char *)get_property(of_chosen, "linux,stdout-path", NULL);
-       if (name == NULL) {
-               DBG(" no linux,stdout-path !\n");
-               return -ENODEV;
-       }
-       prom_stdout = of_find_node_by_path(name);
-       if (!prom_stdout) {
-               DBG(" can't find stdout package %s !\n", name);
-               return -ENODEV;
-       }       
-       DBG("stdout is %s\n", prom_stdout->full_name);
-
-       name = (char *)get_property(prom_stdout, "name", NULL);
-       if (!name) {
-               DBG(" stdout package has no name !\n");
-               goto not_found;
-       }
-       spd = (u32 *)get_property(prom_stdout, "current-speed", NULL);
-
-       if (0)
-               ;
-#ifdef CONFIG_SERIAL_8250_CONSOLE
-       else if (strcmp(name, "serial") == 0) {
-               int i;
-               u32 *reg = (u32 *)get_property(prom_stdout, "reg", &i);
-               if (i > 8) {
-                       switch (reg[1]) {
-                               case 0x3f8:
-                                       offset = 0;
-                                       break;
-                               case 0x2f8:
-                                       offset = 1;
-                                       break;
-                               case 0x898:
-                                       offset = 2;
-                                       break;
-                               case 0x890:
-                                       offset = 3;
-                                       break;
-                               default:
-                                       /* We dont recognise the serial port */
-                                       goto not_found;
-                       }
-               }
-       }
-#endif /* CONFIG_SERIAL_8250_CONSOLE */
-#ifdef CONFIG_PPC_PSERIES
-       else if (strcmp(name, "vty") == 0) {
-               u32 *reg = (u32 *)get_property(prom_stdout, "reg", NULL);
-               char *compat = (char *)get_property(prom_stdout, "compatible", NULL);
-
-               if (reg && compat && (strcmp(compat, "hvterm-protocol") == 0)) {
-                       /* Host Virtual Serial Interface */
-                       int offset;
-                       switch (reg[0]) {
-                               case 0x30000000:
-                                       offset = 0;
-                                       break;
-                               case 0x30000001:
-                                       offset = 1;
-                                       break;
-                               default:
-                                       goto not_found;
-                       }
-                       of_node_put(prom_stdout);
-                       DBG("Found hvsi console at offset %d\n", offset);
-                       return add_preferred_console("hvsi", offset, NULL);
-               } else {
-                       /* pSeries LPAR virtual console */
-                       of_node_put(prom_stdout);
-                       DBG("Found hvc console\n");
-                       return add_preferred_console("hvc", 0, NULL);
-               }
-       }
-#endif /* CONFIG_PPC_PSERIES */
-#ifdef CONFIG_SERIAL_PMACZILOG_CONSOLE
-       else if (strcmp(name, "ch-a") == 0)
-               offset = 0;
-       else if (strcmp(name, "ch-b") == 0)
-               offset = 1;
-#endif /* CONFIG_SERIAL_PMACZILOG_CONSOLE */
-       else
-               goto not_found;
-       of_node_put(prom_stdout);
-
-       DBG("Found serial console at ttyS%d\n", offset);
-
-       if (spd) {
-               static char __initdata opt[16];
-               sprintf(opt, "%d", *spd);
-               return add_preferred_console("ttyS", offset, opt);
-       } else
-               return add_preferred_console("ttyS", offset, NULL);
-
- not_found:
-       DBG("No preferred console found !\n");
-       of_node_put(prom_stdout);
-       return -ENODEV;
-}
-console_initcall(set_preferred_console);
-#endif /* CONFIG_PPC_MULTIPLATFORM */
-
 #ifdef CONFIG_IRQSTACKS
 static void __init irqstack_early_init(void)
 {