dt-bindings: usb: Convert the generic OHCI binding to YAML
authorMaxime Ripard <maxime.ripard@bootlin.com>
Tue, 16 Apr 2019 08:27:58 +0000 (10:27 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 16 Apr 2019 10:20:14 +0000 (12:20 +0200)
The generic OHCI binding is used by many controllers that are using the
OHCI spec.

Convert that binding to a YAML description to enable the validation on all
the nodes using that binding.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/usb/generic-ohci.yaml [new file with mode: 0644]
Documentation/devicetree/bindings/usb/usb-ohci.txt [deleted file]

diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
new file mode 100644 (file)
index 0000000..da5a14b
--- /dev/null
@@ -0,0 +1,89 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/generic-ohci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB OHCI Controller Device Tree Bindings
+
+allOf:
+  - $ref: "usb-hcd.yaml"
+
+maintainers:
+  - Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+
+properties:
+  compatible:
+    contains:
+      const: generic-ohci
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+    description: |
+      In case the Renesas R-Car Gen3 SoCs:
+        - if a host only channel: first clock should be host.
+        - if a USB DRD channel: first clock should be host and second
+          one should be peripheral
+
+  big-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors and big
+      endian registers.
+
+  big-endian-desc:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian descriptors.
+
+  big-endian-regs:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set this flag for HCDs with big endian registers.
+
+  remote-wakeup-connected:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Remote wakeup is wired on the platform.
+
+  no-big-frame-no:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Set if frame_no lives in bits [15:0] of HCCA
+
+  num-ports:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Overrides the detected port count
+
+  phys: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+      ohci0: usb@1c14400 {
+          compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
+          reg = <0x01c14400 0x100>;
+          interrupts = <64>;
+          clocks = <&usb_clk 6>, <&ahb_gates 2>;
+          phys = <&usbphy 1>;
+      };
+
+...
diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt
deleted file mode 100644 (file)
index aaaa525..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-USB OHCI controllers
-
-Required properties:
-- compatible : "generic-ohci"
-- reg : ohci controller register range (address and length)
-- interrupts : ohci controller interrupt
-
-Optional properties:
-- big-endian-regs : boolean, set this for hcds with big-endian registers
-- big-endian-desc : boolean, set this for hcds with big-endian descriptors
-- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc
-- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA
-- remote-wakeup-connected: remote wakeup is wired on the platform
-- num-ports : u32, to override the detected port count
-- clocks : a list of phandle + clock specifier pairs. In case of Renesas
-          R-Car Gen3 SoCs:
-          - if a host only channel: first clock should be host.
-          - if a USB DRD channel: first clock should be host and second one
-                                  should be peripheral.
-- phys : see usb-hcd.txt in the current directory
-- resets : a list of phandle + reset specifier pairs
-
-additionally the properties from usb-hcd.txt (in the current directory) are
-supported.
-
-Example:
-
-       ohci0: usb@1c14400 {
-               compatible = "allwinner,sun4i-a10-ohci", "generic-ohci";
-               reg = <0x01c14400 0x100>;
-               interrupts = <64>;
-               clocks = <&usb_clk 6>, <&ahb_gates 2>;
-               phys = <&usbphy 1>;
-               phy-names = "usb";
-       };