drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc
authorStanimir Varbanov <svarbanov@mm-sol.com>
Wed, 29 Oct 2014 21:50:33 +0000 (14:50 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Wed, 29 Oct 2014 23:33:14 +0000 (16:33 -0700)
Adds support for RTC device inside PM8941 PMIC.  The RTC in this PMIC
have two register spaces.  Thus the rtc-pm8xxx is slightly reworked to
reflect these differences.

The register set for different PMIC chips are selected on DT compatible
string base.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: simplify and fix locking in pm8xxx_rtc_set_time()]
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Josh Cartwright <joshc@codeaurora.org>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/rtc/Kconfig
drivers/rtc/rtc-pm8xxx.c

index 94ae1798d48a96876686e37ad10866d272cccfa2..6dd12ddbabc634b5b22fa8d4dac358c82557a4fd 100644 (file)
@@ -1320,7 +1320,7 @@ config RTC_DRV_LPC32XX
 
 config RTC_DRV_PM8XXX
        tristate "Qualcomm PMIC8XXX RTC"
-       depends on MFD_PM8XXX
+       depends on MFD_PM8XXX || MFD_SPMI_PMIC
        help
          If you say yes here you get support for the
          Qualcomm PMIC8XXX RTC.
index 197699f358c7c18456d9ff7ab8130700001507a7..5adcf111fc1409ac12cd35869cad76cf58c93d1d 100644 (file)
 
 /* RTC_CTRL register bit fields */
 #define PM8xxx_RTC_ENABLE              BIT(7)
-#define PM8xxx_RTC_ALARM_ENABLE                BIT(1)
 #define PM8xxx_RTC_ALARM_CLEAR         BIT(0)
 
 #define NUM_8_BIT_RTC_REGS             0x4
 
+/**
+ * struct pm8xxx_rtc_regs - describe RTC registers per PMIC versions
+ * @ctrl: base address of control register
+ * @write: base address of write register
+ * @read: base address of read register
+ * @alarm_ctrl: base address of alarm control register
+ * @alarm_ctrl2: base address of alarm control2 register
+ * @alarm_rw: base address of alarm read-write register
+ * @alarm_en: alarm enable mask
+ */
+struct pm8xxx_rtc_regs {
+       unsigned int ctrl;
+       unsigned int write;
+       unsigned int read;
+       unsigned int alarm_ctrl;
+       unsigned int alarm_ctrl2;
+       unsigned int alarm_rw;
+       unsigned int alarm_en;
+};
+
 /**
  * struct pm8xxx_rtc -  rtc driver internal structure
  * @rtc:               rtc device for this driver.
  * @regmap:            regmap used to access RTC registers
  * @allow_set_time:    indicates whether writing to the RTC is allowed
  * @rtc_alarm_irq:     rtc alarm irq number.
- * @rtc_base:          address of rtc control register.
- * @rtc_read_base:     base address of read registers.
- * @rtc_write_base:    base address of write registers.
- * @alarm_rw_base:     base address of alarm registers.
  * @ctrl_reg:          rtc control register.
  * @rtc_dev:           device structure.
  * @ctrl_reg_lock:     spinlock protecting access to ctrl_reg.
@@ -51,11 +66,7 @@ struct pm8xxx_rtc {
        struct regmap *regmap;
        bool allow_set_time;
        int rtc_alarm_irq;
-       int rtc_base;
-       int rtc_read_base;
-       int rtc_write_base;
-       int alarm_rw_base;
-       u8 ctrl_reg;
+       const struct pm8xxx_rtc_regs *regs;
        struct device *rtc_dev;
        spinlock_t ctrl_reg_lock;
 };
@@ -71,8 +82,10 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
        int rc, i;
        unsigned long secs, irq_flags;
-       u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, ctrl_reg;
+       u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0;
+       unsigned int ctrl_reg;
        struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
        if (!rtc_dd->allow_set_time)
                return -EACCES;
@@ -87,30 +100,30 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
        dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
 
        spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
-       ctrl_reg = rtc_dd->ctrl_reg;
 
-       if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+       rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+       if (rc)
+               goto rtc_rw_fail;
+
+       if (ctrl_reg & regs->alarm_en) {
                alarm_enabled = 1;
-               ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
-               rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+               ctrl_reg &= ~regs->alarm_en;
+               rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
                if (rc) {
                        dev_err(dev, "Write to RTC control register failed\n");
                        goto rtc_rw_fail;
                }
-               rtc_dd->ctrl_reg = ctrl_reg;
-       } else {
-               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
        }
 
        /* Write 0 to Byte[0] */
-       rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, 0);
+       rc = regmap_write(rtc_dd->regmap, regs->write, 0);
        if (rc) {
                dev_err(dev, "Write to RTC write data register failed\n");
                goto rtc_rw_fail;
        }
 
        /* Write Byte[1], Byte[2], Byte[3] */
-       rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->rtc_write_base + 1,
+       rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
                               &value[1], sizeof(value) - 1);
        if (rc) {
                dev_err(dev, "Write to RTC write data register failed\n");
@@ -118,25 +131,23 @@ static int pm8xxx_rtc_set_time(struct device *dev, struct rtc_time *tm)
        }
 
        /* Write Byte[0] */
-       rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, value[0]);
+       rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
        if (rc) {
                dev_err(dev, "Write to RTC write data register failed\n");
                goto rtc_rw_fail;
        }
 
        if (alarm_enabled) {
-               ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
-               rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+               ctrl_reg |= regs->alarm_en;
+               rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
                if (rc) {
                        dev_err(dev, "Write to RTC control register failed\n");
                        goto rtc_rw_fail;
                }
-               rtc_dd->ctrl_reg = ctrl_reg;
        }
 
 rtc_rw_fail:
-       if (alarm_enabled)
-               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+       spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
 
        return rc;
 }
@@ -148,9 +159,9 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
        unsigned long secs;
        unsigned int reg;
        struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
-       rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
-                             value, sizeof(value));
+       rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
        if (rc) {
                dev_err(dev, "RTC read data register failed\n");
                return rc;
@@ -160,14 +171,14 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
         * Read the LSB again and check if there has been a carry over.
         * If there is, redo the read operation.
         */
-       rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_read_base, &reg);
+       rc = regmap_read(rtc_dd->regmap, regs->read, &reg);
        if (rc < 0) {
                dev_err(dev, "RTC read data register failed\n");
                return rc;
        }
 
        if (unlikely(reg < value[0])) {
-               rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+               rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
                                      value, sizeof(value));
                if (rc) {
                        dev_err(dev, "RTC read data register failed\n");
@@ -195,9 +206,11 @@ static int pm8xxx_rtc_read_time(struct device *dev, struct rtc_time *tm)
 static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 {
        int rc, i;
-       u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+       u8 value[NUM_8_BIT_RTC_REGS];
+       unsigned int ctrl_reg;
        unsigned long secs, irq_flags;
        struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
        rtc_tm_to_time(&alarm->time, &secs);
 
@@ -208,28 +221,28 @@ static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 
        spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 
-       rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+       rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
                               sizeof(value));
        if (rc) {
                dev_err(dev, "Write to RTC ALARM register failed\n");
                goto rtc_rw_fail;
        }
 
-       ctrl_reg = rtc_dd->ctrl_reg;
+       rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+       if (rc)
+               goto rtc_rw_fail;
 
        if (alarm->enabled)
-               ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+               ctrl_reg |= regs->alarm_en;
        else
-               ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+               ctrl_reg &= ~regs->alarm_en;
 
-       rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+       rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
        if (rc) {
-               dev_err(dev, "Write to RTC control register failed\n");
+               dev_err(dev, "Write to RTC alarm control register failed\n");
                goto rtc_rw_fail;
        }
 
-       rtc_dd->ctrl_reg = ctrl_reg;
-
        dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
                alarm->time.tm_hour, alarm->time.tm_min,
                alarm->time.tm_sec, alarm->time.tm_mday,
@@ -245,8 +258,9 @@ static int pm8xxx_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
        u8 value[NUM_8_BIT_RTC_REGS];
        unsigned long secs;
        struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
 
-       rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+       rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
                              sizeof(value));
        if (rc) {
                dev_err(dev, "RTC alarm time read failed\n");
@@ -276,25 +290,26 @@ static int pm8xxx_rtc_alarm_irq_enable(struct device *dev, unsigned int enable)
        int rc;
        unsigned long irq_flags;
        struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
-       u8 ctrl_reg;
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+       unsigned int ctrl_reg;
 
        spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 
-       ctrl_reg = rtc_dd->ctrl_reg;
+       rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+       if (rc)
+               goto rtc_rw_fail;
 
        if (enable)
-               ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+               ctrl_reg |= regs->alarm_en;
        else
-               ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+               ctrl_reg &= ~regs->alarm_en;
 
-       rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+       rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
        if (rc) {
                dev_err(dev, "Write to RTC control register failed\n");
                goto rtc_rw_fail;
        }
 
-       rtc_dd->ctrl_reg = ctrl_reg;
-
 rtc_rw_fail:
        spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
        return rc;
@@ -311,6 +326,7 @@ static const struct rtc_class_ops pm8xxx_rtc_ops = {
 static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
 {
        struct pm8xxx_rtc *rtc_dd = dev_id;
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
        unsigned int ctrl_reg;
        int rc;
        unsigned long irq_flags;
@@ -320,48 +336,100 @@ static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
        spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
 
        /* Clear the alarm enable bit */
-       ctrl_reg = rtc_dd->ctrl_reg;
-       ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+       rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+       if (rc) {
+               spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+               goto rtc_alarm_handled;
+       }
+
+       ctrl_reg &= ~regs->alarm_en;
 
-       rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+       rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
        if (rc) {
                spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
                dev_err(rtc_dd->rtc_dev,
-                       "Write to RTC control register failed\n");
+                       "Write to alarm control register failed\n");
                goto rtc_alarm_handled;
        }
 
-       rtc_dd->ctrl_reg = ctrl_reg;
        spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
 
        /* Clear RTC alarm register */
-       rc = regmap_read(rtc_dd->regmap,
-                        rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
-                        &ctrl_reg);
+       rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
        if (rc) {
                dev_err(rtc_dd->rtc_dev,
-                       "RTC Alarm control register read failed\n");
+                       "RTC Alarm control2 register read failed\n");
                goto rtc_alarm_handled;
        }
 
-       ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
-       rc = regmap_write(rtc_dd->regmap,
-                         rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
-                         ctrl_reg);
+       ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
+       rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
        if (rc)
                dev_err(rtc_dd->rtc_dev,
-                       "Write to RTC Alarm control register failed\n");
+                       "Write to RTC Alarm control2 register failed\n");
 
 rtc_alarm_handled:
        return IRQ_HANDLED;
 }
 
+static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
+{
+       const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+       unsigned int ctrl_reg;
+       int rc;
+
+       /* Check if the RTC is on, else turn it on */
+       rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+       if (rc)
+               return rc;
+
+       if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+               ctrl_reg |= PM8xxx_RTC_ENABLE;
+               rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
+               if (rc)
+                       return rc;
+       }
+
+       return 0;
+}
+
+static const struct pm8xxx_rtc_regs pm8921_regs = {
+       .ctrl           = 0x11d,
+       .write          = 0x11f,
+       .read           = 0x123,
+       .alarm_rw       = 0x127,
+       .alarm_ctrl     = 0x11d,
+       .alarm_ctrl2    = 0x11e,
+       .alarm_en       = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8058_regs = {
+       .ctrl           = 0x1e8,
+       .write          = 0x1ea,
+       .read           = 0x1ee,
+       .alarm_rw       = 0x1f2,
+       .alarm_ctrl     = 0x1e8,
+       .alarm_ctrl2    = 0x1e9,
+       .alarm_en       = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8941_regs = {
+       .ctrl           = 0x6046,
+       .write          = 0x6040,
+       .read           = 0x6048,
+       .alarm_rw       = 0x6140,
+       .alarm_ctrl     = 0x6146,
+       .alarm_ctrl2    = 0x6148,
+       .alarm_en       = BIT(7),
+};
+
 /*
  * Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
  */
 static const struct of_device_id pm8xxx_id_table[] = {
-       { .compatible = "qcom,pm8921-rtc", .data = (void *) 0x11D },
-       { .compatible = "qcom,pm8058-rtc", .data = (void *) 0x1E8 },
+       { .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+       { .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
+       { .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
        { },
 };
 MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
@@ -369,7 +437,6 @@ MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
 static int pm8xxx_rtc_probe(struct platform_device *pdev)
 {
        int rc;
-       unsigned int ctrl_reg;
        struct pm8xxx_rtc *rtc_dd;
        const struct of_device_id *match;
 
@@ -399,33 +466,12 @@ static int pm8xxx_rtc_probe(struct platform_device *pdev)
        rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
                                                      "allow-set-time");
 
-       rtc_dd->rtc_base = (long) match->data;
-
-       /* Setup RTC register addresses */
-       rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
-       rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
-       rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
-
+       rtc_dd->regs = match->data;
        rtc_dd->rtc_dev = &pdev->dev;
 
-       /* Check if the RTC is on, else turn it on */
-       rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_base, &ctrl_reg);
-       if (rc) {
-               dev_err(&pdev->dev, "RTC control register read failed!\n");
+       rc = pm8xxx_rtc_enable(rtc_dd);
+       if (rc)
                return rc;
-       }
-
-       if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
-               ctrl_reg |= PM8xxx_RTC_ENABLE;
-               rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
-               if (rc) {
-                       dev_err(&pdev->dev,
-                               "Write to RTC control register failed\n");
-                       return rc;
-               }
-       }
-
-       rtc_dd->ctrl_reg = ctrl_reg;
 
        platform_set_drvdata(pdev, rtc_dd);