[media] winbond-cir: increase IR receiver resolution
authorSean Young <sean@mess.org>
Wed, 24 Oct 2012 20:22:41 +0000 (17:22 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 21 Nov 2012 19:05:18 +0000 (17:05 -0200)
This is needed for carrier reporting.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/rc/winbond-cir.c

index 16ba38e8183fd309651395667d07d1136e8f9b11..f040bbfd2100cbf666ce9296b8970d4fb45e7ff1 100644 (file)
@@ -358,7 +358,7 @@ wbcir_irq_rx(struct wbcir_data *data, struct pnp_dev *device)
                if (data->rxstate == WBCIR_RXSTATE_ERROR)
                        continue;
                rawir.pulse = irdata & 0x80 ? false : true;
-               rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 10);
+               rawir.duration = US_TO_NS(((irdata & 0x7F) + 1) * 2);
                ir_raw_event_store_with_filter(data->dev, &rawir);
        }
 
@@ -862,8 +862,8 @@ wbcir_init_hw(struct wbcir_data *data)
        /* prescaler 1.0, tx/rx fifo lvl 16 */
        outb(0x30, data->sbase + WBCIR_REG_SP3_EXCR2);
 
-       /* Set baud divisor to sample every 10 us */
-       outb(0x0F, data->sbase + WBCIR_REG_SP3_BGDL);
+       /* Set baud divisor to sample every 2 ns */
+       outb(0x03, data->sbase + WBCIR_REG_SP3_BGDL);
        outb(0x00, data->sbase + WBCIR_REG_SP3_BGDH);
 
        /* Set CEIR mode */
@@ -872,9 +872,12 @@ wbcir_init_hw(struct wbcir_data *data)
        inb(data->sbase + WBCIR_REG_SP3_LSR); /* Clear LSR */
        inb(data->sbase + WBCIR_REG_SP3_MSR); /* Clear MSR */
 
-       /* Disable RX demod, enable run-length enc/dec, set freq span */
+       /*
+        * Disable RX demod, enable run-length enc/dec, set freq span and
+        * enable over-sampling
+        */
        wbcir_select_bank(data, WBCIR_BANK_7);
-       outb(0x90, data->sbase + WBCIR_REG_SP3_RCCFG);
+       outb(0xd0, data->sbase + WBCIR_REG_SP3_RCCFG);
 
        /* Disable timer */
        wbcir_select_bank(data, WBCIR_BANK_4);
@@ -1017,6 +1020,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
        data->dev->priv = data;
        data->dev->dev.parent = &device->dev;
        data->dev->timeout = MS_TO_NS(100);
+       data->dev->rx_resolution = US_TO_NS(2);
        data->dev->allowed_protos = RC_BIT_ALL;
 
        if (!request_region(data->wbase, WAKEUP_IOMEM_LEN, DRVNAME)) {