ARC: Debug/crash-printing Improvements
authorVineet Gupta <vgupta@synopsys.com>
Fri, 22 Mar 2013 11:46:49 +0000 (17:16 +0530)
committerVineet Gupta <vgupta@synopsys.com>
Tue, 7 May 2013 08:13:54 +0000 (13:43 +0530)
* Remove the line-break between scratch/callee-regs (sneaked in when we
  converted from printk to pr_*

* Use %pS to print the symbol names of faulting PC (ret pseudo register)
  and BLINK (call return register)

* Don't print user-vma for a kernel crash (only do it for
  print-fatal-signals based regfile dump)

* Verbose print the Interrupt/Exception Enable/Active state

* for main executable link address is 0x10000 based (vs. 0) thus offset
  of faulting PC needs to be adjusted

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
arch/arc/kernel/troubleshoot.c

index 7c10873c311fb11c0dfad09e1ad5d8cebd958cfc..a39d5812cc09a8d6e698b3eb163bed417f4c7745 100644 (file)
@@ -26,7 +26,6 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
        char buf[512];
        int n = 0, len = sizeof(buf);
 
-       /* weird loop because pt_regs regs rev r12..r0, r25..r13 */
        for (i = start_num; i < start_num + 13; i++) {
                n += scnprintf(buf + n, len - n, "r%02u: 0x%08lx\t",
                               i, (unsigned long)*reg_rev);
@@ -34,13 +33,18 @@ static noinline void print_reg_file(long *reg_rev, int start_num)
                if (((i + 1) % 3) == 0)
                        n += scnprintf(buf + n, len - n, "\n");
 
+               /* because pt_regs has regs reversed: r12..r0, r25..r13 */
                reg_rev--;
        }
 
        if (start_num != 0)
                n += scnprintf(buf + n, len - n, "\n\n");
 
-       pr_info("%s", buf);
+       /* To continue printing callee regs on same line as scratch regs */
+       if (start_num == 0)
+               pr_info("%s", buf);
+       else
+               pr_cont("%s\n", buf);
 }
 
 static void show_callee_regs(struct callee_regs *cregs)
@@ -83,6 +87,10 @@ static void show_faulting_vma(unsigned long address, char *buf)
        dev_t dev = 0;
        char *nm = buf;
 
+       /* can't use print_vma_addr() yet as it doesn't check for
+        * non-inclusive vma
+        */
+
        vma = find_vma(current->active_mm, address);
 
        /* check against the find_vma( ) behaviour which returns the next VMA
@@ -98,10 +106,13 @@ static void show_faulting_vma(unsigned long address, char *buf)
                        ino = inode->i_ino;
                }
                pr_info("    @off 0x%lx in [%s]\n"
-                       "    VMA: 0x%08lx to 0x%08lx\n\n",
-                      address - vma->vm_start, nm, vma->vm_start, vma->vm_end);
-       } else
+                       "    VMA: 0x%08lx to 0x%08lx\n",
+                       vma->vm_start < TASK_UNMAPPED_BASE ?
+                               address : address - vma->vm_start,
+                       nm, vma->vm_start, vma->vm_end);
+       } else {
                pr_info("    @No matching VMA found\n");
+       }
 }
 
 static void show_ecr_verbose(struct pt_regs *regs)
@@ -110,7 +121,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
        unsigned long address;
 
        cause_reg = current->thread.cause_code;
-       pr_info("\n[ECR]: 0x%08x => ", cause_reg);
+       pr_info("\n[ECR   ]: 0x%08x => ", cause_reg);
 
        /* For Data fault, this is data address not instruction addr */
        address = current->thread.fault_address;
@@ -120,7 +131,7 @@ static void show_ecr_verbose(struct pt_regs *regs)
 
        /* For DTLB Miss or ProtV, display the memory involved too */
        if (vec == ECR_V_DTLB_MISS) {
-               pr_cont("Invalid (%s) @ 0x%08lx by insn @ 0x%08lx\n",
+               pr_cont("Invalid %s 0x%08lx by insn @ 0x%08lx\n",
                       (cause_code == 0x01) ? "Read From" :
                       ((cause_code == 0x02) ? "Write to" : "EX"),
                       address, regs->ret);
@@ -167,20 +178,23 @@ void show_regs(struct pt_regs *regs)
        if (current->thread.cause_code)
                show_ecr_verbose(regs);
 
-       pr_info("[EFA]: 0x%08lx\n", current->thread.fault_address);
-       pr_info("[ERET]: 0x%08lx (PC of Faulting Instr)\n", regs->ret);
+       pr_info("[EFA   ]: 0x%08lx\n[BLINK ]: %pS\n[ERET  ]: %pS\n",
+               current->thread.fault_address,
+               (void *)regs->blink, (void *)regs->ret);
 
-       show_faulting_vma(regs->ret, buf);      /* faulting code, not data */
+       if (user_mode(regs))
+               show_faulting_vma(regs->ret, buf); /* faulting code, not data */
 
-       /* can't use print_vma_addr() yet as it doesn't check for
-        * non-inclusive vma
-        */
+       pr_info("[STAT32]: 0x%08lx", regs->status32);
+
+#define STS_BIT(r, bit)        r->status32 & STATUS_##bit##_MASK ? #bit : ""
+       if (!user_mode(regs))
+               pr_cont(" : %2s %2s %2s %2s %2s\n",
+                       STS_BIT(regs, AE), STS_BIT(regs, A2), STS_BIT(regs, A1),
+                       STS_BIT(regs, E2), STS_BIT(regs, E1));
 
-       /* print special regs */
-       pr_info("status32: 0x%08lx\n", regs->status32);
-       pr_info(" SP: 0x%08lx\tFP: 0x%08lx\n", regs->sp, regs->fp);
-       pr_info("BTA: 0x%08lx\tBLINK: 0x%08lx\n",
-               regs->bta, regs->blink);
+       pr_info("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n",
+               regs->bta, regs->sp, regs->fp);
        pr_info("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n",
               regs->lp_start, regs->lp_end, regs->lp_count);