arm64: dts: rockchip: rock-pi-s add more peripherals

This enables the following peripherals:
* Onboard ethernet support
* Bluetooth
* USB 2 port
* OTG port via type-c connector
* Hardware watchog

Also add aliases for the mmc devices and the ethernet interface

Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Link: https://lore.kernel.org/r/20220614064858.1445817-4-sjoerd@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

diff --git a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
index 65376cac497ee2a2121de1e77816dd2e6d6294ca..a71f249ed384e011dd2434fcaebc1308dd036ff9 100644 (file)
--- a/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-rock-pi-s.dts
@@ -11,6 +11,12 @@
        model = "Radxa ROCK Pi S";
        compatible = "radxa,rockpis", "rockchip,rk3308";
 
+       aliases {
+               ethernet0 = &gmac;
+               mmc0 = &emmc;
+               mmc1 = &sdmmc;
+       };
+
        chosen {
                stdout-path = "serial0:1500000n8";
        };
@@ -129,6 +135,15 @@
        status = "okay";
 };
 
+&gmac {
+       clock_in_out = "output";
+       phy-supply = <&vcc_io>;
+       snps,reset-gpio = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 50000 50000>;
+       status = "okay";
+};
+
 &i2c1 {
        status = "okay";
 };
@@ -192,10 +207,47 @@
        status = "okay";
 };
 
+&u2phy {
+       status = "okay";
+
+       u2phy_host: host-port {
+               phy-supply = <&vcc5v0_otg>;
+               status = "okay";
+       };
+
+       u2phy_otg: otg-port {
+               phy-supply = <&vcc5v0_otg>;
+               status = "okay";
+       };
+};
+
 &uart0 {
        status = "okay";
 };
 
 &uart4 {
        status = "okay";
+
+       bluetooth {
+               compatible = "realtek,rtl8723bs-bt";
+               device-wake-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+               host-wake-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>;
+       };
+};
+
+&usb_host_ehci {
+       status = "okay";
+};
+
+&usb_host_ohci {
+       status = "okay";
+};
+
+&usb20_otg {
+       dr_mode = "peripheral";
+       status = "okay";
+};
+
+&wdt {
+       status = "okay";
 };