--- /dev/null
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that packets are sampled when tc-sample is used and that reported
+# metadata is correct. Two sets of hosts (with and without LAG) are used, since
+# metadata extraction in mlxsw is a bit different when LAG is involved.
+#
+# +---------------------------------+ +---------------------------------+
+# | H1 (vrf) | | H3 (vrf) |
+# | + $h1 | | + $h3_lag |
+# | | 192.0.2.1/28 | | | 192.0.2.17/28 |
+# | | | | | |
+# | | default via 192.0.2.2 | | | default via 192.0.2.18 |
+# +----|----------------------------+ +----|----------------------------+
+# | |
+# +----|-----------------------------------------|----------------------------+
+# | | 192.0.2.2/28 | 192.0.2.18/28 |
+# | + $rp1 + $rp3_lag |
+# | |
+# | + $rp2 + $rp4_lag |
+# | | 198.51.100.2/28 | 198.51.100.18/28 |
+# +----|-----------------------------------------|----------------------------+
+# | |
+# +----|----------------------------+ +----|----------------------------+
+# | | default via 198.51.100.2 | | | default via 198.51.100.18 |
+# | | | | | |
+# | | 198.51.100.1/28 | | | 198.51.100.17/28 |
+# | + $h2 | | + $h4_lag |
+# | H2 (vrf) | | H4 (vrf) |
+# +---------------------------------+ +---------------------------------+
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+ tc_sample_rate_test
+ tc_sample_max_rate_test
+ tc_sample_group_conflict_test
+ tc_sample_md_iif_test
+ tc_sample_md_lag_iif_test
+ tc_sample_md_oif_test
+ tc_sample_md_lag_oif_test
+ tc_sample_md_out_tc_test
+ tc_sample_md_out_tc_occ_test
+"
+NUM_NETIFS=8
+CAPTURE_FILE=$(mktemp)
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+# Available at https://github.com/Mellanox/libpsample
+require_command psample
+
+h1_create()
+{
+ simple_if_init $h1 192.0.2.1/28
+
+ ip -4 route add default vrf v$h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+ ip -4 route del default vrf v$h1 nexthop via 192.0.2.2
+
+ simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+ simple_if_init $h2 198.51.100.1/28
+
+ ip -4 route add default vrf v$h2 nexthop via 198.51.100.2
+}
+
+h2_destroy()
+{
+ ip -4 route del default vrf v$h2 nexthop via 198.51.100.2
+
+ simple_if_fini $h2 198.51.100.1/28
+}
+
+h3_create()
+{
+ ip link set dev $h3 down
+ ip link add name ${h3}_bond type bond mode 802.3ad
+ ip link set dev $h3 master ${h3}_bond
+
+ simple_if_init ${h3}_bond 192.0.2.17/28
+
+ ip -4 route add default vrf v${h3}_bond nexthop via 192.0.2.18
+}
+
+h3_destroy()
+{
+ ip -4 route del default vrf v${h3}_bond nexthop via 192.0.2.18
+
+ simple_if_fini ${h3}_bond 192.0.2.17/28
+
+ ip link set dev $h3 nomaster
+ ip link del dev ${h3}_bond
+}
+
+h4_create()
+{
+ ip link set dev $h4 down
+ ip link add name ${h4}_bond type bond mode 802.3ad
+ ip link set dev $h4 master ${h4}_bond
+
+ simple_if_init ${h4}_bond 198.51.100.17/28
+
+ ip -4 route add default vrf v${h4}_bond nexthop via 198.51.100.18
+}
+
+h4_destroy()
+{
+ ip -4 route del default vrf v${h4}_bond nexthop via 198.51.100.18
+
+ simple_if_fini ${h4}_bond 198.51.100.17/28
+
+ ip link set dev $h4 nomaster
+ ip link del dev ${h4}_bond
+}
+
+router_create()
+{
+ ip link set dev $rp1 up
+ __addr_add_del $rp1 add 192.0.2.2/28
+ tc qdisc add dev $rp1 clsact
+
+ ip link set dev $rp2 up
+ __addr_add_del $rp2 add 198.51.100.2/28
+ tc qdisc add dev $rp2 clsact
+
+ ip link add name ${rp3}_bond type bond mode 802.3ad
+ ip link set dev $rp3 master ${rp3}_bond
+ __addr_add_del ${rp3}_bond add 192.0.2.18/28
+ tc qdisc add dev $rp3 clsact
+ ip link set dev ${rp3}_bond up
+
+ ip link add name ${rp4}_bond type bond mode 802.3ad
+ ip link set dev $rp4 master ${rp4}_bond
+ __addr_add_del ${rp4}_bond add 198.51.100.18/28
+ tc qdisc add dev $rp4 clsact
+ ip link set dev ${rp4}_bond up
+}
+
+router_destroy()
+{
+ ip link set dev ${rp4}_bond down
+ tc qdisc del dev $rp4 clsact
+ __addr_add_del ${rp4}_bond del 198.51.100.18/28
+ ip link set dev $rp4 nomaster
+ ip link del dev ${rp4}_bond
+
+ ip link set dev ${rp3}_bond down
+ tc qdisc del dev $rp3 clsact
+ __addr_add_del ${rp3}_bond del 192.0.2.18/28
+ ip link set dev $rp3 nomaster
+ ip link del dev ${rp3}_bond
+
+ tc qdisc del dev $rp2 clsact
+ __addr_add_del $rp2 del 198.51.100.2/28
+ ip link set dev $rp2 down
+
+ tc qdisc del dev $rp1 clsact
+ __addr_add_del $rp1 del 192.0.2.2/28
+ ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+ h1=${NETIFS[p1]}
+ rp1=${NETIFS[p2]}
+ rp2=${NETIFS[p3]}
+ h2=${NETIFS[p4]}
+ h3=${NETIFS[p5]}
+ rp3=${NETIFS[p6]}
+ h4=${NETIFS[p7]}
+ rp4=${NETIFS[p8]}
+
+ vrf_prepare
+
+ h1_create
+ h2_create
+ h3_create
+ h4_create
+ router_create
+}
+
+cleanup()
+{
+ pre_cleanup
+
+ rm -f $CAPTURE_FILE
+
+ router_destroy
+ h4_destroy
+ h3_destroy
+ h2_destroy
+ h1_destroy
+
+ vrf_cleanup
+}
+
+psample_capture_start()
+{
+ rm -f $CAPTURE_FILE
+
+ psample &> $CAPTURE_FILE &
+
+ sleep 1
+}
+
+psample_capture_stop()
+{
+ { kill %% && wait %%; } 2>/dev/null
+}
+
+__tc_sample_rate_test()
+{
+ local desc=$1; shift
+ local dip=$1; shift
+ local pkts pct
+
+ RET=0
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 32 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ -B $dip -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ pkts=$(grep -e "group 1 " $CAPTURE_FILE | wc -l)
+ pct=$((100 * (pkts - 100) / 100))
+ (( -25 <= pct && pct <= 25))
+ check_err $? "Expected 100 packets, got $pkts packets, which is $pct% off. Required accuracy is +-25%"
+
+ log_test "tc sample rate ($desc)"
+
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_rate_test()
+{
+ __tc_sample_rate_test "forward" 198.51.100.1
+ __tc_sample_rate_test "local receive" 192.0.2.2
+}
+
+tc_sample_max_rate_test()
+{
+ RET=0
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate $((35 * 10 ** 8)) group 1
+ check_err $? "Failed to configure sampling rule with max rate"
+
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate $((35 * 10 ** 8 + 1)) \
+ group 1 &> /dev/null
+ check_fail $? "Managed to configure sampling rate above maximum"
+
+ log_test "tc sample maximum rate"
+}
+
+tc_sample_group_conflict_test()
+{
+ RET=0
+
+ # Test that two sampling rules cannot be configured on the same port
+ # with different groups.
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 1024 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ tc filter add dev $rp1 ingress protocol all pref 2 handle 102 matchall \
+ skip_sw action sample rate 1024 group 2 &> /dev/null
+ check_fail $? "Managed to configure sampling rule with conflicting group"
+
+ log_test "tc sample group conflict test"
+
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_iif_test()
+{
+ local rp1_ifindex
+
+ RET=0
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 5 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ rp1_ifindex=$(ip -j -p link show dev $rp1 | jq '.[]["ifindex"]')
+ grep -q -e "in-ifindex $rp1_ifindex " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected in-ifindex"
+
+ log_test "tc sample iif"
+
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_iif_test()
+{
+ local rp3_ifindex
+
+ RET=0
+
+ tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 5 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ psample_capture_start
+
+ ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+ -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ rp3_ifindex=$(ip -j -p link show dev $rp3 | jq '.[]["ifindex"]')
+ grep -q -e "in-ifindex $rp3_ifindex " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected in-ifindex"
+
+ log_test "tc sample lag iif"
+
+ tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_oif_test()
+{
+ local rp2_ifindex
+
+ RET=0
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 5 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ rp2_ifindex=$(ip -j -p link show dev $rp2 | jq '.[]["ifindex"]')
+ grep -q -e "out-ifindex $rp2_ifindex " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected out-ifindex"
+
+ log_test "tc sample oif"
+
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_lag_oif_test()
+{
+ local rp4_ifindex
+
+ RET=0
+
+ tc filter add dev $rp3 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 5 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ psample_capture_start
+
+ ip vrf exec v${h3}_bond $MZ ${h3}_bond -c 3200 -d 1msec -p 64 \
+ -A 192.0.2.17 -B 198.51.100.17 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ rp4_ifindex=$(ip -j -p link show dev $rp4 | jq '.[]["ifindex"]')
+ grep -q -e "out-ifindex $rp4_ifindex " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected out-ifindex"
+
+ log_test "tc sample lag oif"
+
+ tc filter del dev $rp3 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_test()
+{
+ RET=0
+
+ # Output traffic class is not supported on Spectrum-1.
+ [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 5 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ # By default, all the packets should go to the same traffic class (0).
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ grep -q -e "out-tc 0 " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected out-tc (0)"
+
+ # Map all priorities to highest traffic class (7) and check reported
+ # out-tc.
+ tc qdisc replace dev $rp2 root handle 1: \
+ prio bands 3 priomap 0 0 0 0 0 0 0 0
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 3200 -d 1msec -p 64 -A 192.0.2.1 \
+ -B 198.51.100.1 -t udp dp=52768,sp=42768 -q
+
+ psample_capture_stop
+
+ grep -q -e "out-tc 7 " $CAPTURE_FILE
+ check_err $? "Sampled packets do not have expected out-tc (7)"
+
+ log_test "tc sample out-tc"
+
+ tc qdisc del dev $rp2 root handle 1:
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+tc_sample_md_out_tc_occ_test()
+{
+ local backlog pct occ
+
+ RET=0
+
+ # Output traffic class occupancy is not supported on Spectrum-1.
+ [[ "$DEVLINK_VIDDID" == "15b3:cb84" ]] && return
+
+ tc filter add dev $rp1 ingress protocol all pref 1 handle 101 matchall \
+ skip_sw action sample rate 1024 group 1
+ check_err $? "Failed to configure sampling rule"
+
+ # Configure a shaper on egress to create congestion.
+ tc qdisc replace dev $rp2 root handle 1: \
+ tbf rate 1Mbit burst 256k limit 1M
+
+ psample_capture_start
+
+ ip vrf exec v$h1 $MZ $h1 -c 0 -d 1usec -p 1400 -A 192.0.2.1 \
+ -B 198.51.100.1 -t udp dp=52768,sp=42768 -q &
+
+ # Allow congestion to reach steady state.
+ sleep 10
+
+ backlog=$(tc -j -p -s qdisc show dev $rp2 | jq '.[0]["backlog"]')
+
+ # Kill mausezahn.
+ { kill %% && wait %%; } 2>/dev/null
+
+ psample_capture_stop
+
+ # Record last congestion sample.
+ occ=$(grep -e "out-tc-occ " $CAPTURE_FILE | tail -n 1 | \
+ cut -d ' ' -f 16)
+
+ pct=$((100 * (occ - backlog) / backlog))
+ (( -1 <= pct && pct <= 1))
+ check_err $? "Recorded a congestion of $backlog bytes, but sampled congestion is $occ bytes, which is $pct% off. Required accuracy is +-5%"
+
+ log_test "tc sample out-tc-occ"
+
+ tc qdisc del dev $rp2 root handle 1:
+ tc filter del dev $rp1 ingress protocol all pref 1 handle 101 matchall
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
projects / linux-block.git / commitdiff