*.out
*.png
*.gif
+*.svg
media-indices.tmpl
media-entities.tmpl
MAN := $(patsubst %.xml, %.9, $(BOOKS))
mandocs: $(MAN)
+ $(if $(wildcard $(obj)/man/*.9),gzip -f $(obj)/man/*.9)
installmandocs: mandocs
mkdir -p /usr/local/man/man9/
cat $(HTML) >> $(main_idx)
quiet_cmd_db2html = HTML $@
- cmd_db2html = xmlto xhtml $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
+ cmd_db2html = xmlto html $(XMLTOFLAGS) -o $(patsubst %.html,%,$@) $< && \
echo '<a HREF="$(patsubst %.html,%,$(notdir $@))/index.html"> \
$(patsubst %.html,%,$(notdir $@))</a><p>' > $@
cp $(PNG-$(basename $(notdir $@))) $(patsubst %.html,%,$@); fi
quiet_cmd_db2man = MAN $@
- cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; gzip -f $(obj)/man/*.9; fi
+ cmd_db2man = if grep -q refentry $<; then xmlto man $(XMLTOFLAGS) -o $(obj)/man $< ; fi
%.9 : %.xml
@(which xmlto > /dev/null 2>&1) || \
(echo "*** You need to install xmlto ***"; \
<sect1><title>The Slab Cache</title>
!Iinclude/linux/slab.h
!Emm/slab.c
+!Emm/util.c
</sect1>
<sect1><title>User Space Memory Access</title>
!Iarch/x86/include/asm/uaccess_32.h
system and will otherwise use a linear domain mapping. The semantics
of this call are such that if an IRQ range is specified then
descriptors will be allocated on-the-fly for it, and if no range is
-specified it will fall through to irq_domain_add_linear() which meand
+specified it will fall through to irq_domain_add_linear() which means
*no* irq descriptors will be allocated.
A typical use case for simple domains is where an irqchip provider
struct device_driver driver;
};
-Note that probe() should general verify that the specified device hardware
+Note that probe() should in general verify that the specified device hardware
actually exists; sometimes platform setup code can't be sure. The probing
can use device resources, including clocks, and device platform_data.
**** How to install bzImage.efi
The bzImage located in arch/x86/boot/bzImage must be copied to the EFI
-System Partiion (ESP) and renamed with the extension ".efi". Without
+System Partition (ESP) and renamed with the extension ".efi". Without
the extension the EFI firmware loader will refuse to execute it. It's
not possible to execute bzImage.efi from the usual Linux file systems
because EFI firmware doesn't have support for them.
As an added bonus you can customise the message creation toolbar menu
and put the "insert file" icon there.
-Make the the composer window wide enough so that no lines wrap. As of
+Make the composer window wide enough so that no lines wrap. As of
KMail 1.13.5 (KDE 4.5.4), KMail will apply word wrapping when sending
the email if the lines wrap in the composer window. Having word wrapping
disabled in the Options menu isn't enough. Thus, if your patch has very
will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
-acces_process_vm(), typically used to debug a process through
+access_process_vm(), typically used to debug a process through
/proc/pid/mem or ptrace. This function is needed only for
VM_IO | VM_PFNMAP VMAs.
sys See chapter 2
sysvipc Info of SysVIPC Resources (msg, sem, shm) (2.4)
tty Info of tty drivers
- uptime System uptime
+ uptime Wall clock since boot, combined idle time of all cpus
version Kernel version
video bttv info of video resources (2.4)
vmallocinfo Show vmalloced areas
void io_mapping_unmap_atomic(void *vaddr)
- 'vaddr' must be the the value returned by the last
+ 'vaddr' must be the value returned by the last
io_mapping_map_atomic_wc call. This unmaps the specified
page and allows the task to sleep once again.
cgroup_disable= [KNL] Disable a particular controller
Format: {name of the controller(s) to disable}
- {Currently supported controllers - "memory"}
+ The effects of cgroup_disable=foo are:
+ - foo isn't auto-mounted if you mount all cgroups in
+ a single hierarchy
+ - foo isn't visible as an individually mountable
+ subsystem
+ {Currently only "memory" controller deal with this and
+ cut the overhead, others just disable the usage. So
+ only cgroup_disable=memory is actually worthy}
checkreqprot [SELINUX] Set initial checkreqprot flag value.
Format: { "0" | "1" }
return -EINVAL;
strncpy(devname, device + 5, sizeof(devname));
- snprintf(unload_heads_path, sizeof(unload_heads_path),
+ snprintf(unload_heads_path, sizeof(unload_heads_path) - 1,
"/sys/block/%s/device/unload_heads", devname);
return 0;
}
found. The count in 'mismatch_cnt' is the number of sectors
that were re-written, or (for 'check') would have been
re-written. As most raid levels work in units of pages rather
- than sectors, this my be larger than the number of actual errors
+ than sectors, this may be larger than the number of actual errors
by a factor of the number of sectors in a page.
bitmap_set_bits
depends on RFKILL || !RFKILL
to ensure the driver cannot be built-in when rfkill is modular. The !RFKILL
-case allows the driver to be built when rfkill is not configured, which which
+case allows the driver to be built when rfkill is not configured, which
case all rfkill API can still be used but will be provided by static inlines
which compile to almost nothing.
priority process is prevented from running by a lower priority process for
an undetermined amount of time.
-The classic example of unbounded priority inversion is were you have three
+The classic example of unbounded priority inversion is where you have three
processes, let's call them processes A, B, and C, where A is the highest
priority process, C is the lowest, and B is in between. A tries to grab a lock
that C owns and must wait and lets C run to release the lock. But in the
static_key_slow_dec(&key);
Thus, 'static_key_slow_inc()' means 'make the branch true', and
-'static_key_slow_dec()' means 'make the the branch false' with appropriate
+'static_key_slow_dec()' means 'make the branch false' with appropriate
reference counting. For example, if the key is initialized true, a
static_key_slow_dec(), will switch the branch to false. And a subsequent
static_key_slow_inc(), will change the branch back to true. Likewise, if the
If we then include the padding bytes, the jump label code saves, 16 total bytes
of instruction memory for this small function. In this case the non-jump label
-function is 80 bytes long. Thus, we have have saved 20% of the instruction
+function is 80 bytes long. Thus, we have saved 20% of the instruction
footprint. We can in fact improve this even further, since the 5-byte no-op
really can be a 2-byte no-op since we can reach the branch with a 2-byte jmp.
However, we have not yet implemented optimal no-op sizes (they are currently
and RNDIS can be turned off. If they are both enabled the gadget will
have two configurations -- one with RNDIS and another with CDC ECM[3].
-Please not that if you use non-standard configuration (that is enable
+Please note that if you use non-standard configuration (that is enable
CDC ECM) you may need to change vendor and/or product ID.
* Host drivers
no_timer_check Don't check the IO-APIC timer. This can work around
problems with incorrect timer initialization on some boards.
-
- apicmaintimer Run time keeping from the local APIC timer instead
- of using the PIT/HPET interrupt for this. This is useful
- when the PIT/HPET interrupts are unreliable.
-
- noapicmaintimer Don't do time keeping using the APIC timer.
- Useful when this option was auto selected, but doesn't work.
-
apicpmtimer
Do APIC timer calibration using the pmtimer. Implies
apicmaintimer. Useful when your PIT timer is totally
on Enable(default)
off Disable
-SMP
-
- additional_cpus=NUM Allow NUM more CPUs for hotplug
- (defaults are specified by the BIOS, see Documentation/x86/x86_64/cpu-hotplug-spec)
-
NUMA
numa=off Only set up a single NUMA node spanning all memory.
kstack=N Print N words from the kernel stack in oops dumps.
- pagefaulttrace Dump all page faults. Only useful for extreme debugging
- and will create a lot of output.
-
- call_trace=[old|both|newfallback|new]
- old: use old inexact backtracer
- new: use new exact dwarf2 unwinder
- both: print entries from both
- newfallback: use new unwinder but fall back to old if it gets
- stuck (default)
-
Miscellaneous
nogbpages
bool "PControl G20 CPU module"
help
Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, beeing the decentralized unit of a building automation
+ carrier board, being the decentralized unit of a building automation
system; featuring nvram, eth-switch, iso-rs485, display, io
config MACH_GSIA18S
"imx-mmc-detect", data);
if (ret)
printk(KERN_ERR
- "pca100: Failed to reuest irq for sd/mmc detection\n");
+ "pca100: Failed to request irq for sd/mmc detection\n");
return ret;
}
void ixp4xx_restart(enum reboot_mode mode, const char *cmd)
{
- if ( 1 && mode == REBOOT_SOFT) {
+ if (mode == REBOOT_SOFT) {
/* Jump into ROM at address 0 */
soft_restart(0);
} else {
if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) ||
!arm_exit_handlers[hsr_ec]) {
- kvm_err("Unkown exception class: hsr: %#08x\n",
+ kvm_err("Unknown exception class: hsr: %#08x\n",
(unsigned int)kvm_vcpu_get_hsr(vcpu));
BUG();
}
clockevents_register_device(&systick.dev);
- pr_info("%s: runing - mult: %d, shift: %d\n",
+ pr_info("%s: running - mult: %d, shift: %d\n",
np->name, systick.dev.mult, systick.dev.shift);
}
rt_timer_config(rt, 2);
rt_timer_enable(rt);
- dev_info(&pdev->dev, "maximum frequncy is %luHz\n", rt->timer_freq);
+ dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq);
return 0;
}
if (dma && !write) {
spin_unlock_irqrestore(&lpbfifo.lock, flags);
- pr_err("bogus LPBFIFO IRQ (dma and not writting)\n");
+ pr_err("bogus LPBFIFO IRQ (dma and not writing)\n");
return IRQ_HANDLED;
}
struct validate_flash_t {
int status; /* Return status */
- void *buf; /* Candiate image buffer */
+ void *buf; /* Candidate image buffer */
uint32_t buf_size; /* Image size */
uint32_t result; /* Update results token */
};
memcpy(&image_header, (void *)buffer, sizeof(struct image_header_t));
image_data.size = be32_to_cpu(image_header.size);
- pr_debug("FLASH: Candiate image size = %u\n", image_data.size);
+ pr_debug("FLASH: Candidate image size = %u\n", image_data.size);
if (image_data.size > MAX_IMAGE_SIZE) {
pr_warn("FLASH: Too large image\n");
depends on X86_32 && X86_MCE
---help---
Include support for machine check handling on old Pentium 5 or WinChip
- systems. These typically need to be enabled explicitely on the command
+ systems. These typically need to be enabled explicitly on the command
line.
config X86_MCE_THRESHOLD
with the commandline parameter: devtmpfs.mount=0|1.
This option does not affect initramfs based booting, here
the devtmpfs filesystem always needs to be mounted manually
- after the roots is mounted.
+ after the rootfs is mounted.
With this option enabled, it allows to bring up a system in
rescue mode with init=/bin/sh, even when the /dev directory
on the rootfs is completely empty.
obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o
obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o
-obj-$(CONFIG_VIODASD) += viodasd.o
obj-$(CONFIG_BLK_DEV_SX8) += sx8.o
obj-$(CONFIG_BLK_DEV_HD) += hd.o
obj-$(CONFIG_PARIDE_PCD) += cdrom.o
obj-$(CONFIG_CDROM_PKTCDVD) += cdrom.o
-obj-$(CONFIG_VIOCD) += viocd.o cdrom.o
obj-$(CONFIG_GDROM) += gdrom.o cdrom.o
obj-$(CONFIG_MSPEC) += mspec.o
obj-$(CONFIG_MMTIMER) += mmtimer.o
obj-$(CONFIG_UV_MMTIMER) += uv_mmtimer.o
-obj-$(CONFIG_VIOTAPE) += viotape.o
obj-$(CONFIG_IBM_BSR) += bsr.o
obj-$(CONFIG_SGI_MBCS) += mbcs.o
obj-$(CONFIG_BFIN_OTP) += bfin-otp.o
if (count > MAX_BUF_SIZE)
return -EINVAL;
- DBG("writting %d bytes\n", count);
+ DBG("writing %d bytes\n", count);
smd_pkt_devp = file->private_data;
if (!smd_pkt_devp || !smd_pkt_devp->ch)
};
/*
- * MIF is the main control knob clock for exynox4x12 MIF/INT
+ * MIF is the main control knob clock for Exynos4x12 MIF/INT
* clock and voltage of both mif/int are controlled.
*/
static struct bus_opp_table exynos4x12_mifclk_table[] = {
if (old_freq == freq)
return 0;
- dev_dbg(dev, "targetting %lukHz %luuV\n", freq, volt);
+ dev_dbg(dev, "targeting %lukHz %luuV\n", freq, volt);
mutex_lock(&data->lock);
* @pipe: a crtc index created at load() with a new crtc object creation
* and the crtc object would be set to private->crtc array
* to get a crtc object corresponding to this pipe from private->crtc
- * array when irq interrupt occured. the reason of using this pipe is that
+ * array when irq interrupt occurred. the reason of using this pipe is that
* drm framework doesn't support multiple irq yet.
- * we can refer to the crtc to current hardware interrupt occured through
+ * we can refer to the crtc to current hardware interrupt occurred through
* this pipe value.
* @dpms: store the crtc dpms value
* @mode: store the crtc mode value
fimc_write(cfg, EXYNOS_CIWDOFST);
- dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n",
+ dev_err(ippdrv->dev, "occurred overflow at %d, status 0x%x.\n",
ctx->id, status);
return true;
}
* G2D interrupt event once current command list execution is
* finished.
* Otherwise only ACF bit should be set to INTEN register so
- * that one interrupt is occured after all command lists
+ * that one interrupt is occurred after all command lists
* have been completed.
*/
if (node->event) {
int ret;
/*
- * alocate memory to be used for framebuffer.
+ * allocate memory to be used for framebuffer.
* - this callback would be called by user application
* with DRM_IOCTL_MODE_CREATE_DUMB command.
*/
* @vma: a pointer to vm_area.
* @flags: indicate memory type to allocated buffer and cache attruibute.
*
- * P.S. this object would be transfered to user as kms_bo.handle so
+ * P.S. this object would be transferred to user as kms_bo.handle so
* user can access the buffer through kms_bo.handle.
*/
struct exynos_drm_gem_obj {
status = gsc_read(GSC_IRQ);
if (status & GSC_IRQ_STATUS_OR_IRQ) {
- dev_err(ippdrv->dev, "occured overflow at %d, status 0x%x.\n",
+ dev_err(ippdrv->dev, "occurred overflow at %d, status 0x%x.\n",
ctx->id, status);
return IRQ_NONE;
}
if (status & GSC_IRQ_STATUS_OR_FRM_DONE) {
- dev_dbg(ippdrv->dev, "occured frame done at %d, status 0x%x.\n",
+ dev_dbg(ippdrv->dev, "occurred frame done at %d, status 0x%x.\n",
ctx->id, status);
buf_id[EXYNOS_DRM_OPS_SRC] = gsc_get_src_buf_index(ctx);
} else {
/*
* Getting ippdrv capability by ipp_id.
- * some deivce not supported wb, output interface.
+ * some device not supported wb, output interface.
* so, user application detect correct ipp driver
* using this ioctl.
*/
/*
* A structure of command node.
*
- * @priv: IPP private infomation.
+ * @priv: IPP private information.
* @list: list head to command queue information.
* @event_list: list head of event.
* @mem_list: list head to source,destination memory queue information.
};
/*
- * A structure of wb setting infomation.
+ * A structure of wb setting information.
*
* @enable: enable flag for wb.
* @refresh: HZ of the refresh rate.
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_DEFERRED_IO
- select DRM_KMS_HELPER
+ select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
- select DRM_TTM
+ select DRM_TTM
select CRC32
help
- QXL virtual GPU for Spice virtualization desktop integration. Do not enable this driver unless your distro ships a corresponding X.org QXL driver that can handle kernel modesetting.
+ QXL virtual GPU for Spice virtualization desktop integration.
+ Do not enable this driver unless your distro ships a corresponding
+ X.org QXL driver that can handle kernel modesetting.
/* first line will contain the last register
* and gpu name */
- sscanf(buf, "%s %s", gpu_name, last_reg_s);
+ sscanf(buf, "%9s %9s", gpu_name, last_reg_s);
t->gpu_prefix = gpu_name;
last_reg = strtol(last_reg_s, NULL, 16);
int i = 0, ret = 0, stop = 0;
if (i2c->suspended) {
- dev_err(i2c->dev, "HS-I2C is not initialzed.\n");
+ dev_err(i2c->dev, "HS-I2C is not initialized.\n");
return -EIO;
}
/* Check that the bus is free, or wait until some timeout occurs */
ret = stu300_wait_while_busy(dev);
if (ret != 0) {
- dev_err(&dev->pdev->dev, "timout waiting for transfer "
+ dev_err(&dev->pdev->dev, "timeout waiting for transfer "
"to commence.\n");
goto exit_disable;
}
ret = twl_i2c_write_u8(TWL6030_MODULE_ID1, TWL6030_GPADCR,
TWL6030_REG_TOGGLE1);
if (ret)
- dev_err(pdev, "error reseting GPADC (%d)!\n", ret);
+ dev_err(pdev, "error resetting GPADC (%d)!\n", ret);
return 0;
};
#else
if (!request_region(hw->iobase, 8, hw->card_name)) {
printk(KERN_INFO
- "HFC-4S/8S: failed to rquest address space at 0x%04x\n",
+ "HFC-4S/8S: failed to request address space at 0x%04x\n",
hw->iobase);
goto out;
}
This module may be used for special applications that require
cross connecting of bchannels, conferencing, dtmf decoding,
- echo cancelation, tone generation, and Blowfish encryption and
+ echo cancellation, tone generation, and Blowfish encryption and
decryption. It may use hardware features if available.
E.g. it is required for PBX4Linux. Go to http://isdn.eversberg.eu
#include "leds-lp55xx-common.h"
-#define LP5523_PROGRAM_LENGTH 32
+#define LP5523_PROGRAM_LENGTH 32 /* bytes */
+/* Memory is used like this:
+ 0x00 engine 1 program
+ 0x10 engine 2 program
+ 0x20 engine 3 program
+ 0x30 engine 1 muxing info
+ 0x40 engine 2 muxing info
+ 0x50 engine 3 muxing info
+*/
#define LP5523_MAX_LEDS 9
/* Registers */
}
/*
- * Program momery sequence
+ * Program memory sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
pr_debug("word5: max_width %d, max_height %d\n",
dtd_get_max_width(dtd), dtd_get_max_height(dtd));
- pr_debug("word6: client specfic attr0 = 0x%08x\n", dtd->client_attr0);
- pr_debug("word7: client specfic attr1 = 0x%08x\n", dtd->client_attr1);
+ pr_debug("word6: client specific attr0 = 0x%08x\n", dtd->client_attr0);
+ pr_debug("word7: client specific attr1 = 0x%08x\n", dtd->client_attr1);
}
/*
IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
"fsa9480 micro USB", usbsw);
if (ret) {
- dev_err(&client->dev, "failed to reqeust IRQ\n");
+ dev_err(&client->dev, "failed to request IRQ\n");
return ret;
}
/*
- * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
- *
* Copyright (C) 2008-2010 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
spin_unlock_irqrestore(&sc->lmc_lock, flags);
- lmc_trace(dev, "lmc_driver_timout out");
+ lmc_trace(dev, "lmc_driver_timeout out");
}
/* handle unexpected PS SLEEP event */
if (priv->psstate == PS_STATE_FULL_POWER) {
lbs_deb_cmd(
- "EVENT: in FULL POWER mode, ignoreing PS_SLEEP\n");
+ "EVENT: in FULL POWER mode, ignoring PS_SLEEP\n");
break;
}
priv->psstate = PS_STATE_PRE_SLEEP;
Some devices support more than one LUN (Logical Unit Number) in order
to allow access to several media, e.g. CD jukebox, USB card reader,
mobile phone in mass storage mode. This option forces the kernel to
- probe for all LUNs by default. This setting can be overriden by
+ probe for all LUNs by default. This setting can be overridden by
max_luns boot/module parameter. Note that this option does not affect
- devices conforming to SCSI-3 or higher as they can explicitely report
+ devices conforming to SCSI-3 or higher as they can explicitly report
their number of LUNs. It is safe to say Y here unless you have one of
those rare devices which reacts in an unexpected way when probed for
multiple LUNs.
if (r_addr & 0xf) {
ql_dbg(ql_dbg_p3p, vha, 0xb0f1,
- "[%s]: Read addr 0x%x not 16 bytes alligned\n",
+ "[%s]: Read addr 0x%x not 16 bytes aligned\n",
__func__, r_addr);
return QLA_FUNCTION_FAILED;
}
}
/* Recovery Failed, some other function
* has the lock, wait for 2secs and retry */
- ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timout\n",
+ ql4_printk(KERN_INFO, ha, "%s: IDC lock Recovery by %d failed, Retrying timeout\n",
__func__, ha->func_num);
timeout = 0;
}
msg.msg_namelen = 0;
msg.msg_control = NULL;
msg.msg_controllen = 0;
- msg.msg_namelen = 0;
msg.msg_flags = MSG_NOSIGNAL;
result = kernel_recvmsg(sock, &msg, &iov, 1, size, MSG_WAITALL);
/* enable temperature comparation */
rcar_thermal_common_write(common, ENR, 0x00030303);
- idle = 0; /* polling delaye is not needed */
+ idle = 0; /* polling delay is not needed */
}
for (i = 0;; i++) {
fast_timers[info->line].function = NULL;
serial_fast_timer_expired++;
- TIMERD(DEBUG_LOG(info->line, "flush_timout %i ", info->line));
+ TIMERD(DEBUG_LOG(info->line, "flush_timeout %i ", info->line));
TIMERD(DEBUG_LOG(info->line, "num expired: %i\n", serial_fast_timer_expired));
check_flush_timeout(info);
}
KOBIL_TIMEOUT
);
dev_dbg(dev, "%s - Send get_HW_version URB returns: %i\n", __func__, result);
- dev_dbg(dev, "Harware version: %i.%i.%i\n", transfer_buffer[0],
+ dev_dbg(dev, "Hardware version: %i.%i.%i\n", transfer_buffer[0],
transfer_buffer[1], transfer_buffer[2]);
/* get firmware version */
}
if (pixel_limit) {
- pr_warn("DL chip limit of %d overriden"
+ pr_warn("DL chip limit of %d overridden"
" by module param to %d\n",
dev->sku_pixel_limit, pixel_limit);
dev->sku_pixel_limit = pixel_limit;
To do that the driver parses the Power Management data and uploads
said information to the Xen hypervisor. Then the Xen hypervisor can
- select the proper Cx and Pxx states. It also registers itslef as the
+ select the proper Cx and Pxx states. It also registers itself as the
SMM so that other drivers (such as ACPI cpufreq scaling driver) will
not load.
ret = btrfs_remove_free_space(cache, 2 * 1024 * 1024, 4096);
if (ret) {
- test_msg("Error removing middle peice %d\n", ret);
+ test_msg("Error removing middle piece %d\n", ret);
return ret;
}
}
if (test_check_exists(cache, 512 * 1024, 3 * 1024 * 1024)) {
- test_msg("Left over peices after removing overlapping\n");
+ test_msg("Left over pieces after removing overlapping\n");
return -1;
}
/*
* User space memory access functions, these should work
- * on a ny machine that has kernel and user data in the same
+ * on any machine that has kernel and user data in the same
* address space, e.g. all NOMMU machines.
*/
#include <linux/sched.h>
/*
- * arch/arm/include/asm/hardware/sp810.h
- *
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
* warranty of any kind, whether express or implied.
*/
-#ifndef __ASM_ARM_SP810_H
-#define __ASM_ARM_SP810_H
+#ifndef __AMBA_SP810_H
+#define __AMBA_SP810_H
#include <linux/io.h>
writel(0, base + SCSYSSTAT);
}
-#endif /* __ASM_ARM_SP810_H */
+#endif /* __AMBA_SP810_H */
*/
struct kmem_cache {
-/* 1) Cache tunables. Protected by cache_chain_mutex */
+/* 1) Cache tunables. Protected by slab_mutex */
unsigned int batchcount;
unsigned int limit;
unsigned int shared;
* For use with the TRACE_EVENT macro:
*
* We define a tracepoint, its arguments, its printk format
- * and its 'fast binay record' layout.
+ * and its 'fast binary record' layout.
*
* Firstly, name your tracepoint via TRACE_EVENT(name : the
* 'subsystem_event' notation is fine.
* wait_event_cmd - sleep until a condition gets true
* @wq: the waitqueue to wait on
* @condition: a C expression for the event to wait for
- * cmd1: the command will be executed before sleep
- * cmd2: the command will be executed after sleep
+ * @cmd1: the command will be executed before sleep
+ * @cmd2: the command will be executed after sleep
*
* The process is put to sleep (TASK_UNINTERRUPTIBLE) until the
* @condition evaluates to true. The @condition is checked each time
/* NUD_NOARP & NUD_PERMANENT are pseudostates, they never change
and make no address resolution or NUD.
- NUD_PERMANENT is also cannot be deleted by garbage collectors.
+ NUD_PERMANENT also cannot be deleted by garbage collectors.
*/
struct nda_cacheinfo {
* @rxqs: the number of RX subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
- * and performs basic initialization. Also allocates subquue structs
+ * and performs basic initialization. Also allocates subqueue structs
* for each queue on the device.
*/
struct net_device *alloc_netdev_mqs(int sizeof_priv, const char *name,
You can define here default value of the maximum number
of IP sets for the kernel.
- The value can be overriden by the 'max_sets' module
+ The value can be overridden by the 'max_sets' module
parameter of the 'ip_set' module.
config IP_SET_BITMAP_IP
rf_tech = NFC_DIGITAL_RF_TECH_424F;
break;
default:
- pr_err("Unsuported dsi value %d\n", dsi);
+ pr_err("Unsupported dsi value %d\n", dsi);
goto exit;
}
{
struct sk_buff *skb;
- pr_debug("remote asks retransmition from frame %d\n", y_nr);
+ pr_debug("remote asks retransmission from frame %d\n", y_nr);
if (llc_shdlc_x_lteq_y_lt_z(shdlc->dnr, y_nr, shdlc->ns)) {
if (shdlc->t2_active) {