usb: gadget: atmel_usba_udc: Request an auto disabled Vbus signal IRQ
authorSylvain Rochet <sylvain.rochet@finsecur.com>
Thu, 12 Feb 2015 17:54:05 +0000 (18:54 +0100)
committerFelipe Balbi <balbi@ti.com>
Wed, 11 Mar 2015 15:19:36 +0000 (10:19 -0500)
Vbus IRQ handler needs a started UDC driver to work because it uses
udc->driver, which is set by the UDC start handler. The previous way
chosen was to return from interrupt if udc->driver is NULL using a
spinlock around the check.

We now request an auto disabled (IRQ_NOAUTOEN) Vbus signal IRQ instead
of an auto enabled IRQ followed by disable_irq(). This way we remove the
very small timeslot of enabled IRQ which existed previously between
request() and disable(). We don't need anymore to check if udc->driver
is NULL in IRQ handler.

Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Suggested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/gadget/udc/atmel_usba_udc.c

index e63c6fc8173be3db31d0fb3a73393919301bb59d..bbbd5f11f76709ca6d85de543dc1828c6e3f60f7 100644 (file)
@@ -1749,10 +1749,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
 
        spin_lock(&udc->lock);
 
-       /* May happen if Vbus pin toggles during probe() */
-       if (!udc->driver)
-               goto out;
-
        vbus = vbus_is_present(udc);
        if (vbus != udc->vbus_prev) {
                if (vbus) {
@@ -1773,7 +1769,6 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid)
                udc->vbus_prev = vbus;
        }
 
-out:
        spin_unlock(&udc->lock);
 
        return IRQ_HANDLED;
@@ -2113,6 +2108,8 @@ static int usba_udc_probe(struct platform_device *pdev)
 
        if (gpio_is_valid(udc->vbus_pin)) {
                if (!devm_gpio_request(&pdev->dev, udc->vbus_pin, "atmel_usba_udc")) {
+                       irq_set_status_flags(gpio_to_irq(udc->vbus_pin),
+                                       IRQ_NOAUTOEN);
                        ret = devm_request_irq(&pdev->dev,
                                        gpio_to_irq(udc->vbus_pin),
                                        usba_vbus_irq, 0,
@@ -2122,8 +2119,6 @@ static int usba_udc_probe(struct platform_device *pdev)
                                dev_warn(&udc->pdev->dev,
                                         "failed to request vbus irq; "
                                         "assuming always on\n");
-                       } else {
-                               disable_irq(gpio_to_irq(udc->vbus_pin));
                        }
                } else {
                        /* gpio_request fail so use -EINVAL for gpio_is_valid */