qlcnic: Fix ethtool supported port status for 83xx
authorHimanshu Madhani <himanshu.madhani@qlogic.com>
Thu, 9 May 2013 09:25:12 +0000 (09:25 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sat, 11 May 2013 23:01:15 +0000 (16:01 -0700)
o Fix display for interface while using 'ethtool <device>' for 83xx adapter

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c
drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c

index 90c253b145eff8b9ae622877933f101cdf70b633..019c5f78732ead011ca07edecee78ac435368ff1 100644 (file)
@@ -429,6 +429,7 @@ struct qlcnic_hardware_context {
 
        u16 port_type;
        u16 board_type;
+       u16 supported_type;
 
        u16 link_speed;
        u16 link_duplex;
@@ -1514,6 +1515,7 @@ void qlcnic_create_diag_entries(struct qlcnic_adapter *adapter);
 void qlcnic_remove_diag_entries(struct qlcnic_adapter *adapter);
 void qlcnic_82xx_add_sysfs(struct qlcnic_adapter *adapter);
 void qlcnic_82xx_remove_sysfs(struct qlcnic_adapter *adapter);
+int qlcnic_82xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
 
 int qlcnicvf_config_bridged_mode(struct qlcnic_adapter *, u32);
 int qlcnicvf_config_led(struct qlcnic_adapter *, u32, u32);
index ea790a93ee7c0e79acedd062a1d1795fb413e8c4..642fca0b15d247735d10299588a3ec0a8bcf7f75 100644 (file)
@@ -2830,6 +2830,23 @@ int qlcnic_83xx_test_link(struct qlcnic_adapter *adapter)
                        break;
                }
                config = cmd.rsp.arg[3];
+               if (QLC_83XX_SFP_PRESENT(config)) {
+                       switch (ahw->module_type) {
+                       case LINKEVENT_MODULE_OPTICAL_UNKNOWN:
+                       case LINKEVENT_MODULE_OPTICAL_SRLR:
+                       case LINKEVENT_MODULE_OPTICAL_LRM:
+                       case LINKEVENT_MODULE_OPTICAL_SFP_1G:
+                               ahw->supported_type = PORT_FIBRE;
+                               break;
+                       case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLE:
+                       case LINKEVENT_MODULE_TWINAX_UNSUPPORTED_CABLELEN:
+                       case LINKEVENT_MODULE_TWINAX:
+                               ahw->supported_type = PORT_TP;
+                               break;
+                       default:
+                               ahw->supported_type = PORT_OTHER;
+                       }
+               }
                if (config & 1)
                        err = 1;
        }
@@ -2838,7 +2855,8 @@ out:
        return config;
 }
 
-int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
+int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter,
+                            struct ethtool_cmd *ecmd)
 {
        u32 config = 0;
        int status = 0;
@@ -2851,6 +2869,54 @@ int qlcnic_83xx_get_settings(struct qlcnic_adapter *adapter)
        ahw->module_type = QLC_83XX_SFP_MODULE_TYPE(config);
        /* hard code until there is a way to get it from flash */
        ahw->board_type = QLCNIC_BRDTYPE_83XX_10G;
+
+       if (netif_running(adapter->netdev) && ahw->has_link_events) {
+               ethtool_cmd_speed_set(ecmd, ahw->link_speed);
+               ecmd->duplex = ahw->link_duplex;
+               ecmd->autoneg = ahw->link_autoneg;
+       } else {
+               ethtool_cmd_speed_set(ecmd, SPEED_UNKNOWN);
+               ecmd->duplex = DUPLEX_UNKNOWN;
+               ecmd->autoneg = AUTONEG_DISABLE;
+       }
+
+       if (ahw->port_type == QLCNIC_XGBE) {
+               ecmd->supported = SUPPORTED_1000baseT_Full;
+               ecmd->advertising = ADVERTISED_1000baseT_Full;
+       } else {
+               ecmd->supported = (SUPPORTED_10baseT_Half |
+                                  SUPPORTED_10baseT_Full |
+                                  SUPPORTED_100baseT_Half |
+                                  SUPPORTED_100baseT_Full |
+                                  SUPPORTED_1000baseT_Half |
+                                  SUPPORTED_1000baseT_Full);
+               ecmd->advertising = (ADVERTISED_100baseT_Half |
+                                    ADVERTISED_100baseT_Full |
+                                    ADVERTISED_1000baseT_Half |
+                                    ADVERTISED_1000baseT_Full);
+       }
+
+       switch (ahw->supported_type) {
+       case PORT_FIBRE:
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising |= ADVERTISED_FIBRE;
+               ecmd->port = PORT_FIBRE;
+               ecmd->transceiver = XCVR_EXTERNAL;
+               break;
+       case PORT_TP:
+               ecmd->supported |= SUPPORTED_TP;
+               ecmd->advertising |= ADVERTISED_TP;
+               ecmd->port = PORT_TP;
+               ecmd->transceiver = XCVR_INTERNAL;
+               break;
+       default:
+               ecmd->supported |= SUPPORTED_FIBRE;
+               ecmd->advertising |= ADVERTISED_FIBRE;
+               ecmd->port = PORT_OTHER;
+               ecmd->transceiver = XCVR_EXTERNAL;
+               break;
+       }
+       ecmd->phy_address = ahw->physical_port;
        return status;
 }
 
index 1f1d85e6f2afd1e4cb1581f03088333b034726a3..faf5553681e129a0d98d300e8fd32fede7d84cf6 100644 (file)
@@ -603,7 +603,7 @@ int qlcnic_83xx_get_vnic_pf_info(struct qlcnic_adapter *, struct qlcnic_info *);
 
 void qlcnic_83xx_get_minidump_template(struct qlcnic_adapter *);
 void qlcnic_83xx_get_stats(struct qlcnic_adapter *adapter, u64 *data);
-int qlcnic_83xx_get_settings(struct qlcnic_adapter *);
+int qlcnic_83xx_get_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
 int qlcnic_83xx_set_settings(struct qlcnic_adapter *, struct ethtool_cmd *);
 void qlcnic_83xx_get_pauseparam(struct qlcnic_adapter *,
                                struct ethtool_pauseparam *);
index 6005b06dbf64f23d8baaa6e08a86894503de8c84..f67652de5a63ca4736794d01c794ce44f1a6e382 100644 (file)
@@ -252,6 +252,18 @@ static int
 qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
        struct qlcnic_adapter *adapter = netdev_priv(dev);
+
+       if (qlcnic_82xx_check(adapter))
+               return qlcnic_82xx_get_settings(adapter, ecmd);
+       else if (qlcnic_83xx_check(adapter))
+               return qlcnic_83xx_get_settings(adapter, ecmd);
+
+       return -EIO;
+}
+
+int qlcnic_82xx_get_settings(struct qlcnic_adapter *adapter,
+                            struct ethtool_cmd *ecmd)
+{
        struct qlcnic_hardware_context *ahw = adapter->ahw;
        u32 speed, reg;
        int check_sfp_module = 0;
@@ -277,10 +289,7 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 
        } else if (adapter->ahw->port_type == QLCNIC_XGBE) {
                u32 val = 0;
-               if (qlcnic_83xx_check(adapter))
-                       qlcnic_83xx_get_settings(adapter);
-               else
-                       val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
+               val = QLCRD32(adapter, QLCNIC_PORT_MODE_ADDR);
 
                if (val == QLCNIC_PORT_MODE_802_3_AP) {
                        ecmd->supported = SUPPORTED_1000baseT_Full;
@@ -290,16 +299,13 @@ qlcnic_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
                        ecmd->advertising = ADVERTISED_10000baseT_Full;
                }
 
-               if (netif_running(dev) && adapter->ahw->has_link_events) {
-                       if (qlcnic_82xx_check(adapter)) {
-                               reg = QLCRD32(adapter,
-                                             P3P_LINK_SPEED_REG(pcifn));
-                               speed = P3P_LINK_SPEED_VAL(pcifn, reg);
-                               ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
-                       }
-                       ethtool_cmd_speed_set(ecmd, adapter->ahw->link_speed);
-                       ecmd->autoneg = adapter->ahw->link_autoneg;
-                       ecmd->duplex = adapter->ahw->link_duplex;
+               if (netif_running(adapter->netdev) && ahw->has_link_events) {
+                       reg = QLCRD32(adapter, P3P_LINK_SPEED_REG(pcifn));
+                       speed = P3P_LINK_SPEED_VAL(pcifn, reg);
+                       ahw->link_speed = speed * P3P_LINK_SPEED_MHZ;
+                       ethtool_cmd_speed_set(ecmd, ahw->link_speed);
+                       ecmd->autoneg = ahw->link_autoneg;
+                       ecmd->duplex = ahw->link_duplex;
                        goto skip;
                }
 
@@ -341,8 +347,8 @@ skip:
        case QLCNIC_BRDTYPE_P3P_10G_SFP_QT:
                ecmd->advertising |= ADVERTISED_TP;
                ecmd->supported |= SUPPORTED_TP;
-               check_sfp_module = netif_running(dev) &&
-                                  adapter->ahw->has_link_events;
+               check_sfp_module = netif_running(adapter->netdev) &&
+                                  ahw->has_link_events;
        case QLCNIC_BRDTYPE_P3P_10G_XFP:
                ecmd->supported |= SUPPORTED_FIBRE;
                ecmd->advertising |= ADVERTISED_FIBRE;
@@ -356,8 +362,8 @@ skip:
                        ecmd->advertising |=
                                (ADVERTISED_FIBRE | ADVERTISED_TP);
                        ecmd->port = PORT_FIBRE;
-                       check_sfp_module = netif_running(dev) &&
-                                          adapter->ahw->has_link_events;
+                       check_sfp_module = netif_running(adapter->netdev) &&
+                                          ahw->has_link_events;
                } else {
                        ecmd->autoneg = AUTONEG_ENABLE;
                        ecmd->supported |= (SUPPORTED_TP | SUPPORTED_Autoneg);
@@ -366,13 +372,6 @@ skip:
                        ecmd->port = PORT_TP;
                }
                break;
-       case QLCNIC_BRDTYPE_83XX_10G:
-               ecmd->autoneg = AUTONEG_DISABLE;
-               ecmd->supported |= (SUPPORTED_FIBRE | SUPPORTED_TP);
-               ecmd->advertising |= (ADVERTISED_FIBRE | ADVERTISED_TP);
-               ecmd->port = PORT_FIBRE;
-               check_sfp_module = netif_running(dev) && ahw->has_link_events;
-               break;
        default:
                dev_err(&adapter->pdev->dev, "Unsupported board model %d\n",
                        adapter->ahw->board_type);