+++ /dev/null
-Device tree Clock bindings for Renesas EMMA Mobile EV2
-
-This binding uses the common clock binding.
-
-* SMU
-System Management Unit described in user's manual R19UH0037EJ1000_SMU.
-This is not a clock provider, but clocks under SMU depend on it.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu"
-- reg: Address and Size of SMU registers
-
-* SMU_CLKDIV
-Function block with an input mux and a divider, which corresponds to
-"Serial clock generator" in fig."Clock System Overview" of the manual,
-and "xxx frequency division setting register" (XXXCLKDIV) registers.
-This makes internal (neither input nor output) clock that is provided
-to input of xxxGCLK block.
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-clkdiv"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-* SMU_GCLK
-Clock gating node shown as "Clock stop processing block" in the
-fig."Clock System Overview" of the manual.
-Registers are "xxx clock gate control register" (XXXGCLKCTRL).
-
-Required properties:
-- compatible: Should be "renesas,emev2-smu-gclk"
-- reg: Byte offset from SMU base and Bit position in the register
-- clocks: Input clock as described in clock-bindings.txt
-- #clock-cells: Should be <0>
-
-Example of provider:
-
-usia_u0_sclkdiv: usia_u0_sclkdiv {
- compatible = "renesas,emev2-smu-clkdiv";
- reg = <0x610 0>;
- clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
- #clock-cells = <0>;
-};
-
-usia_u0_sclk: usia_u0_sclk {
- compatible = "renesas,emev2-smu-gclk";
- reg = <0x4a0 1>;
- clocks = <&usia_u0_sclkdiv>;
- #clock-cells = <0>;
-};
-
-Example of consumer:
-
-serial@e1020000 {
- compatible = "renesas,em-uart";
- reg = <0xe1020000 0x38>;
- interrupts = <0 8 0>;
- clocks = <&usia_u0_sclk>;
- clock-names = "sclk";
-};
-
-Example of clock-tree description:
-
- This describes a clock path in the clock tree
- c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
-
-smu@e0110000 {
- compatible = "renesas,emev2-smu";
- reg = <0xe0110000 0x10000>;
- #address-cells = <2>;
- #size-cells = <0>;
-
- c32ki: c32ki {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- #clock-cells = <0>;
- };
- pll3_fo: pll3_fo {
- compatible = "fixed-factor-clock";
- clocks = <&c32ki>;
- clock-div = <1>;
- clock-mult = <7000>;
- #clock-cells = <0>;
- };
- usia_u0_sclkdiv: usia_u0_sclkdiv {
- compatible = "renesas,emev2-smu-clkdiv";
- reg = <0x610 0>;
- clocks = <&pll3_fo>;
- #clock-cells = <0>;
- };
- usia_u0_sclk: usia_u0_sclk {
- compatible = "renesas,emev2-smu-gclk";
- reg = <0x4a0 1>;
- clocks = <&usia_u0_sclkdiv>;
- #clock-cells = <0>;
- };
-};
--- /dev/null
+Device tree Clock bindings for Renesas EMMA Mobile EV2
+
+This binding uses the common clock binding.
+
+* SMU
+System Management Unit described in user's manual R19UH0037EJ1000_SMU.
+This is not a clock provider, but clocks under SMU depend on it.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu"
+- reg: Address and Size of SMU registers
+
+* SMU_CLKDIV
+Function block with an input mux and a divider, which corresponds to
+"Serial clock generator" in fig."Clock System Overview" of the manual,
+and "xxx frequency division setting register" (XXXCLKDIV) registers.
+This makes internal (neither input nor output) clock that is provided
+to input of xxxGCLK block.
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-clkdiv"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Parent clocks. Input clocks as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+* SMU_GCLK
+Clock gating node shown as "Clock stop processing block" in the
+fig."Clock System Overview" of the manual.
+Registers are "xxx clock gate control register" (XXXGCLKCTRL).
+
+Required properties:
+- compatible: Should be "renesas,emev2-smu-gclk"
+- reg: Byte offset from SMU base and Bit position in the register
+- clocks: Input clock as described in clock-bindings.txt
+- #clock-cells: Should be <0>
+
+Example of provider:
+
+usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>, <&pll4_fo>, <&pll1_fo>, <&osc1_fo>;
+ #clock-cells = <0>;
+};
+
+usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+};
+
+Example of consumer:
+
+serial@e1020000 {
+ compatible = "renesas,em-uart";
+ reg = <0xe1020000 0x38>;
+ interrupts = <0 8 0>;
+ clocks = <&usia_u0_sclk>;
+ clock-names = "sclk";
+};
+
+Example of clock-tree description:
+
+ This describes a clock path in the clock tree
+ c32ki -> pll3_fo -> usia_u0_sclkdiv -> usia_u0_sclk
+
+smu@e0110000 {
+ compatible = "renesas,emev2-smu";
+ reg = <0xe0110000 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ c32ki: c32ki {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ #clock-cells = <0>;
+ };
+ pll3_fo: pll3_fo {
+ compatible = "fixed-factor-clock";
+ clocks = <&c32ki>;
+ clock-div = <1>;
+ clock-mult = <7000>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclkdiv: usia_u0_sclkdiv {
+ compatible = "renesas,emev2-smu-clkdiv";
+ reg = <0x610 0>;
+ clocks = <&pll3_fo>;
+ #clock-cells = <0>;
+ };
+ usia_u0_sclk: usia_u0_sclk {
+ compatible = "renesas,emev2-smu-gclk";
+ reg = <0x4a0 1>;
+ clocks = <&usia_u0_sclkdiv>;
+ #clock-cells = <0>;
+ };
+};