- The boot loader is expected to call the kernel image by jumping
directly to the first instruction of the kernel image.
+ On CPUs supporting the ARM instruction set, the entry must be
+ made in ARM state, even for a Thumb-2 kernel.
+
+ On CPUs supporting only the Thumb instruction set such as
+ Cortex-M class CPUs, the entry must be made in Thumb state.
--- /dev/null
+ROM-able zImage boot from eSD
+-----------------------------
+
+An ROM-able zImage compiled with ZBOOT_ROM_SDHI may be written to eSD and
+SuperH Mobile ARM will to boot directly from the SDHI hardware block.
+
+This is achieved by the mask ROM loading the first portion of the image into
+MERAM and then jumping to it. This portion contains loader code which
+copies the entire image to SDRAM and jumps to it. From there the zImage
+boot code proceeds as normal, uncompressing the image into its final
+location and then jumping to it.
+
+This code has been tested on an mackerel board using the developer 1A eSD
+boot mode which is configured using the following jumper settings.
+
+ 8 7 6 5 4 3 2 1
+ x|x|x|x| |x|x|
+S4 -+-+-+-+-+-+-+-
+ | | | |x| | |x on
+
+The eSD card needs to be present in SDHI slot 1 (CN7).
+As such S1 and S33 also need to be configured as per
+the notes in arch/arm/mach-shmobile/board-mackerel.c.
+
+A partial zImage must be written to physical partition #1 (boot)
+of the eSD at sector 0 in vrl4 format. A utility vrl4 is supplied to
+accomplish this.
+
+e.g.
+ vrl4 < zImage | dd of=/dev/sdX bs=512 count=17
+
+A full copy of _the same_ zImage should be written to physical partition #1
+(boot) of the eSD at sector 0. This should _not_ be in vrl4 format.
+
+ vrl4 < zImage | dd of=/dev/sdX bs=512
+
+Note: The commands above assume that the physical partition has been
+switched. No such facility currently exists in the Linux Kernel.
+
+Physical partitions are described in the eSD specification. At the time of
+writing they are not the same as partitions that are typically configured
+using fdisk and visible through /proc/partitions
--- /dev/null
+Kernel-provided User Helpers
+============================
+
+These are segment of kernel provided user code reachable from user space
+at a fixed address in kernel memory. This is used to provide user space
+with some operations which require kernel help because of unimplemented
+native feature and/or instructions in many ARM CPUs. The idea is for this
+code to be executed directly in user mode for best efficiency but which is
+too intimate with the kernel counter part to be left to user libraries.
+In fact this code might even differ from one CPU to another depending on
+the available instruction set, or whether it is a SMP systems. In other
+words, the kernel reserves the right to change this code as needed without
+warning. Only the entry points and their results as documented here are
+guaranteed to be stable.
+
+This is different from (but doesn't preclude) a full blown VDSO
+implementation, however a VDSO would prevent some assembly tricks with
+constants that allows for efficient branching to those code segments. And
+since those code segments only use a few cycles before returning to user
+code, the overhead of a VDSO indirect far call would add a measurable
+overhead to such minimalistic operations.
+
+User space is expected to bypass those helpers and implement those things
+inline (either in the code emitted directly by the compiler, or part of
+the implementation of a library call) when optimizing for a recent enough
+processor that has the necessary native support, but only if resulting
+binaries are already to be incompatible with earlier ARM processors due to
+useage of similar native instructions for other things. In other words
+don't make binaries unable to run on earlier processors just for the sake
+of not using these kernel helpers if your compiled code is not going to
+use new instructions for other purpose.
+
+New helpers may be added over time, so an older kernel may be missing some
+helpers present in a newer kernel. For this reason, programs must check
+the value of __kuser_helper_version (see below) before assuming that it is
+safe to call any particular helper. This check should ideally be
+performed only once at process startup time, and execution aborted early
+if the required helpers are not provided by the kernel version that
+process is running on.
+
+kuser_helper_version
+--------------------
+
+Location: 0xffff0ffc
+
+Reference declaration:
+
+ extern int32_t __kuser_helper_version;
+
+Definition:
+
+ This field contains the number of helpers being implemented by the
+ running kernel. User space may read this to determine the availability
+ of a particular helper.
+
+Usage example:
+
+#define __kuser_helper_version (*(int32_t *)0xffff0ffc)
+
+void check_kuser_version(void)
+{
+ if (__kuser_helper_version < 2) {
+ fprintf(stderr, "can't do atomic operations, kernel too old\n");
+ abort();
+ }
+}
+
+Notes:
+
+ User space may assume that the value of this field never changes
+ during the lifetime of any single process. This means that this
+ field can be read once during the initialisation of a library or
+ startup phase of a program.
+
+kuser_get_tls
+-------------
+
+Location: 0xffff0fe0
+
+Reference prototype:
+
+ void * __kuser_get_tls(void);
+
+Input:
+
+ lr = return address
+
+Output:
+
+ r0 = TLS value
+
+Clobbered registers:
+
+ none
+
+Definition:
+
+ Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
+
+Usage example:
+
+typedef void * (__kuser_get_tls_t)(void);
+#define __kuser_get_tls (*(__kuser_get_tls_t *)0xffff0fe0)
+
+void foo()
+{
+ void *tls = __kuser_get_tls();
+ printf("TLS = %p\n", tls);
+}
+
+Notes:
+
+ - Valid only if __kuser_helper_version >= 1 (from kernel version 2.6.12).
+
+kuser_cmpxchg
+-------------
+
+Location: 0xffff0fc0
+
+Reference prototype:
+
+ int __kuser_cmpxchg(int32_t oldval, int32_t newval, volatile int32_t *ptr);
+
+Input:
+
+ r0 = oldval
+ r1 = newval
+ r2 = ptr
+ lr = return address
+
+Output:
+
+ r0 = success code (zero or non-zero)
+ C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+ r3, ip, flags
+
+Definition:
+
+ Atomically store newval in *ptr only if *ptr is equal to oldval.
+ Return zero if *ptr was changed or non-zero if no exchange happened.
+ The C flag is also set if *ptr was changed to allow for assembly
+ optimization in the calling code.
+
+Usage example:
+
+typedef int (__kuser_cmpxchg_t)(int oldval, int newval, volatile int *ptr);
+#define __kuser_cmpxchg (*(__kuser_cmpxchg_t *)0xffff0fc0)
+
+int atomic_add(volatile int *ptr, int val)
+{
+ int old, new;
+
+ do {
+ old = *ptr;
+ new = old + val;
+ } while(__kuser_cmpxchg(old, new, ptr));
+
+ return new;
+}
+
+Notes:
+
+ - This routine already includes memory barriers as needed.
+
+ - Valid only if __kuser_helper_version >= 2 (from kernel version 2.6.12).
+
+kuser_memory_barrier
+--------------------
+
+Location: 0xffff0fa0
+
+Reference prototype:
+
+ void __kuser_memory_barrier(void);
+
+Input:
+
+ lr = return address
+
+Output:
+
+ none
+
+Clobbered registers:
+
+ none
+
+Definition:
+
+ Apply any needed memory barrier to preserve consistency with data modified
+ manually and __kuser_cmpxchg usage.
+
+Usage example:
+
+typedef void (__kuser_dmb_t)(void);
+#define __kuser_dmb (*(__kuser_dmb_t *)0xffff0fa0)
+
+Notes:
+
+ - Valid only if __kuser_helper_version >= 3 (from kernel version 2.6.15).
+
+kuser_cmpxchg64
+---------------
+
+Location: 0xffff0f60
+
+Reference prototype:
+
+ int __kuser_cmpxchg64(const int64_t *oldval,
+ const int64_t *newval,
+ volatile int64_t *ptr);
+
+Input:
+
+ r0 = pointer to oldval
+ r1 = pointer to newval
+ r2 = pointer to target value
+ lr = return address
+
+Output:
+
+ r0 = success code (zero or non-zero)
+ C flag = set if r0 == 0, clear if r0 != 0
+
+Clobbered registers:
+
+ r3, lr, flags
+
+Definition:
+
+ Atomically store the 64-bit value pointed by *newval in *ptr only if *ptr
+ is equal to the 64-bit value pointed by *oldval. Return zero if *ptr was
+ changed or non-zero if no exchange happened.
+
+ The C flag is also set if *ptr was changed to allow for assembly
+ optimization in the calling code.
+
+Usage example:
+
+typedef int (__kuser_cmpxchg64_t)(const int64_t *oldval,
+ const int64_t *newval,
+ volatile int64_t *ptr);
+#define __kuser_cmpxchg64 (*(__kuser_cmpxchg64_t *)0xffff0f60)
+
+int64_t atomic_add64(volatile int64_t *ptr, int64_t val)
+{
+ int64_t old, new;
+
+ do {
+ old = *ptr;
+ new = old + val;
+ } while(__kuser_cmpxchg64(&old, &new, ptr));
+
+ return new;
+}
+
+Notes:
+
+ - This routine already includes memory barriers as needed.
+
+ - Due to the length of this sequence, this spans 2 conventional kuser
+ "slots", therefore 0xffff0f80 is not used as a valid entry point.
+
+ - Valid only if __kuser_helper_version >= 5 (from kernel version 3.1).
--- /dev/null
+* ARM Performance Monitor Units
+
+ARM cores often have a PMU for counting cpu and cache events like cache misses
+and hits. The interface to the PMU is part of the ARM ARM. The ARM PMU
+representation in the device tree should be done as under:-
+
+Required properties:
+
+- compatible : should be one of
+ "arm,cortex-a9-pmu"
+ "arm,cortex-a8-pmu"
+ "arm,arm1176-pmu"
+ "arm,arm1136-pmu"
+- interrupts : 1 combined interrupt or 1 per core.
+
+Example:
+
+pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <100 101>;
+};
select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
+ select HAVE_KPROBES if !XIP_KERNEL
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
Europe. There is an ARM Linux project with a web page at
<http://www.arm.linux.org.uk/>.
+config ARM_HAS_SG_CHAIN
+ bool
+
config HAVE_PWM
bool
config HAVE_ARM_SCU
bool
- depends on SMP
help
This option enables support for the ARM system coherency unit
Say Y here if you intend to execute your compressed kernel image
(zImage) directly from ROM or flash. If unsure, say N.
+choice
+ prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)"
+ depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
+ default ZBOOT_ROM_NONE
+ help
+ Include experimental SD/MMC loading code in the ROM-able zImage.
+ With this enabled it is possible to write the the ROM-able zImage
+ kernel image to an MMC or SD card and boot the kernel straight
+ from the reset vector. At reset the processor Mask ROM will load
+ the first part of the the ROM-able zImage which in turn loads the
+ rest the kernel image to RAM.
+
+config ZBOOT_ROM_NONE
+ bool "No SD/MMC loader in zImage (EXPERIMENTAL)"
+ help
+ Do not load image from SD or MMC
+
config ZBOOT_ROM_MMCIF
bool "Include MMCIF loader in zImage (EXPERIMENTAL)"
- depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL
help
- Say Y here to include experimental MMCIF loading code in the
- ROM-able zImage. With this enabled it is possible to write the
- the ROM-able zImage kernel image to an MMC card and boot the
- kernel straight from the reset vector. At reset the processor
- Mask ROM will load the first part of the the ROM-able zImage
- which in turn loads the rest the kernel image to RAM using the
- MMCIF hardware block.
+ Load image from MMCIF hardware block.
+
+config ZBOOT_ROM_SH_MOBILE_SDHI
+ bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)"
+ help
+ Load image from SDHI hardware block
+
+endchoice
config CMDLINE
string "Default kernel command string"
OBJS =
-# Ensure that mmcif loader code appears early in the image
+# Ensure that MMCIF loader code appears early in the image
# to minimise that number of bocks that have to be read in
# order to load it.
ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
-ifeq ($(CONFIG_ARCH_SH7372),y)
OBJS += mmcif-sh7372.o
endif
+
+# Ensure that SDHI loader code appears early in the image
+# to minimise that number of bocks that have to be read in
+# order to load it.
+ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y)
+OBJS += sdhi-shmobile.o
+OBJS += sdhi-sh7372.o
endif
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
/* load board-specific initialization code */
#include <mach/zboot.h>
-#ifdef CONFIG_ZBOOT_ROM_MMCIF
- /* Load image from MMC */
- adr sp, __tmp_stack + 128
+#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI)
+ /* Load image from MMC/SD */
+ adr sp, __tmp_stack + 256
ldr r0, __image_start
ldr r1, __image_end
subs r1, r1, r0
ldr r0, __load_base
- bl mmcif_loader
+ bl mmc_loader
/* Jump to loaded code */
ldr r0, __loaded
.long __continue
.align
__tmp_stack:
- .space 128
+ .space 256
__continue:
-#endif /* CONFIG_ZBOOT_ROM_MMCIF */
+#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */
b 1f
__atags:@ tag #1
mov r0, #0 @ must be zero
mov r1, r7 @ restore architecture number
mov r2, r8 @ restore atags pointer
- mov pc, r4 @ call kernel
+ ARM( mov pc, r4 ) @ call kernel
+ THUMB( bx r4 ) @ entry point is always ARM
.align 2
.type LC0, #object
* to an MMC card
* # dd if=vrl4.out of=/dev/sdx bs=512 seek=1
*/
-asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len)
+asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
{
mmc_init_progress();
mmc_update_progress(MMC_PROGRESS_ENTER);
--- /dev/null
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Kuninori Morimoto
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Parts inspired by u-boot
+ */
+
+#include <linux/io.h>
+#include <mach/mmc.h>
+#include <linux/mmc/boot.h>
+#include <linux/mmc/tmio.h>
+
+#include "sdhi-shmobile.h"
+
+#define PORT179CR 0xe60520b3
+#define PORT180CR 0xe60520b4
+#define PORT181CR 0xe60520b5
+#define PORT182CR 0xe60520b6
+#define PORT183CR 0xe60520b7
+#define PORT184CR 0xe60520b8
+
+#define SMSTPCR3 0xe615013c
+
+#define CR_INPUT_ENABLE 0x10
+#define CR_FUNCTION1 0x01
+
+#define SDHI1_BASE (void __iomem *)0xe6860000
+#define SDHI_BASE SDHI1_BASE
+
+/* SuperH Mobile SDHI loader
+ *
+ * loads the zImage from an SD card starting from block 0
+ * on physical partition 1
+ *
+ * The image must be start with a vrl4 header and
+ * the zImage must start at offset 512 of the image. That is,
+ * at block 1 (=byte 512) of physical partition 1
+ *
+ * Use the following line to write the vrl4 formated zImage
+ * to an SD card
+ * # dd if=vrl4.out of=/dev/sdx bs=512
+ */
+asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
+{
+ int high_capacity;
+
+ mmc_init_progress();
+
+ mmc_update_progress(MMC_PROGRESS_ENTER);
+ /* Initialise SDHI1 */
+ /* PORT184CR: GPIO_FN_SDHICMD1 Control */
+ __raw_writeb(CR_FUNCTION1, PORT184CR);
+ /* PORT179CR: GPIO_FN_SDHICLK1 Control */
+ __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR);
+ /* PORT181CR: GPIO_FN_SDHID1_3 Control */
+ __raw_writeb(CR_FUNCTION1, PORT183CR);
+ /* PORT182CR: GPIO_FN_SDHID1_2 Control */
+ __raw_writeb(CR_FUNCTION1, PORT182CR);
+ /* PORT183CR: GPIO_FN_SDHID1_1 Control */
+ __raw_writeb(CR_FUNCTION1, PORT181CR);
+ /* PORT180CR: GPIO_FN_SDHID1_0 Control */
+ __raw_writeb(CR_FUNCTION1, PORT180CR);
+
+ /* Enable clock to SDHI1 hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3);
+
+ /* setup SDHI hardware */
+ mmc_update_progress(MMC_PROGRESS_INIT);
+ high_capacity = sdhi_boot_init(SDHI_BASE);
+ if (high_capacity < 0)
+ goto err;
+
+ mmc_update_progress(MMC_PROGRESS_LOAD);
+ /* load kernel */
+ if (sdhi_boot_do_read(SDHI_BASE, high_capacity,
+ 0, /* Kernel is at block 1 */
+ (len + TMIO_BBS - 1) / TMIO_BBS, buf))
+ goto err;
+
+ /* Disable clock to SDHI1 hardware block */
+ __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+
+ mmc_update_progress(MMC_PROGRESS_DONE);
+
+ return;
+err:
+ for(;;);
+}
--- /dev/null
+/*
+ * SuperH Mobile SDHI
+ *
+ * Copyright (C) 2010 Magnus Damm
+ * Copyright (C) 2010 Kuninori Morimoto
+ * Copyright (C) 2010 Simon Horman
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Parts inspired by u-boot
+ */
+
+#include <linux/io.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/tmio.h>
+#include <mach/sdhi.h>
+
+#define OCR_FASTBOOT (1<<29)
+#define OCR_HCS (1<<30)
+#define OCR_BUSY (1<<31)
+
+#define RESP_CMD12 0x00000030
+
+static inline u16 sd_ctrl_read16(void __iomem *base, int addr)
+{
+ return __raw_readw(base + addr);
+}
+
+static inline u32 sd_ctrl_read32(void __iomem *base, int addr)
+{
+ return __raw_readw(base + addr) |
+ __raw_readw(base + addr + 2) << 16;
+}
+
+static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val)
+{
+ __raw_writew(val, base + addr);
+}
+
+static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val)
+{
+ __raw_writew(val, base + addr);
+ __raw_writew(val >> 16, base + addr + 2);
+}
+
+#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \
+ TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \
+ TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \
+ TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \
+ TMIO_STAT_ILL_FUNC)
+
+static int sdhi_intr(void __iomem *base)
+{
+ unsigned long state = sd_ctrl_read32(base, CTL_STATUS);
+
+ if (state & ALL_ERROR) {
+ sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR);
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ ALL_ERROR |
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ return -EINVAL;
+ }
+ if (state & TMIO_STAT_CMDRESPEND) {
+ sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ TMIO_STAT_CMDRESPEND |
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ return 0;
+ }
+ if (state & TMIO_STAT_RXRDY) {
+ sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY);
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN |
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ return 0;
+ }
+ if (state & TMIO_STAT_DATAEND) {
+ sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND);
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ TMIO_STAT_DATAEND |
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ return 0;
+ }
+
+ return -EAGAIN;
+}
+
+static int sdhi_boot_wait_resp_end(void __iomem *base)
+{
+ int err = -EAGAIN, timeout = 10000000;
+
+ while (timeout--) {
+ err = sdhi_intr(base);
+ if (err != -EAGAIN)
+ break;
+ udelay(1);
+ }
+
+ return err;
+}
+
+/* SDHI_CLK_CTRL */
+#define CLK_MMC_ENABLE (1 << 8)
+#define CLK_MMC_INIT (1 << 6) /* clk / 256 */
+
+static void sdhi_boot_mmc_clk_stop(void __iomem *base)
+{
+ sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000);
+ msleep(10);
+ sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE &
+ sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
+ msleep(10);
+}
+
+static void sdhi_boot_mmc_clk_start(void __iomem *base)
+{
+ sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE |
+ sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL));
+ msleep(10);
+ sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE);
+ msleep(10);
+}
+
+static void sdhi_boot_reset(void __iomem *base)
+{
+ sd_ctrl_write16(base, CTL_RESET_SD, 0x0000);
+ msleep(10);
+ sd_ctrl_write16(base, CTL_RESET_SD, 0x0001);
+ msleep(10);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot
+ * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as
+ * MMC wont run that fast, it has to be clocked at 12MHz which is the next
+ * slowest setting.
+ */
+static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios)
+{
+ if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY)
+ return -EBUSY;
+
+ if (ios->clock)
+ sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL,
+ ios->clock | CLK_MMC_ENABLE);
+
+ /* Power sequence - OFF -> ON -> UP */
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF: /* power down SD bus */
+ sdhi_boot_mmc_clk_stop(base);
+ break;
+ case MMC_POWER_ON: /* power up SD bus */
+ break;
+ case MMC_POWER_UP: /* start bus clock */
+ sdhi_boot_mmc_clk_start(base);
+ break;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0);
+ break;
+ case MMC_BUS_WIDTH_4:
+ sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0);
+ break;
+ }
+
+ /* Let things settle. delay taken from winCE driver */
+ udelay(140);
+
+ return 0;
+}
+
+/* These are the bitmasks the tmio chip requires to implement the MMC response
+ * types. Note that R1 and R6 are the same in this scheme. */
+#define RESP_NONE 0x0300
+#define RESP_R1 0x0400
+#define RESP_R1B 0x0500
+#define RESP_R2 0x0600
+#define RESP_R3 0x0700
+#define DATA_PRESENT 0x0800
+#define TRANSFER_READ 0x1000
+
+static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd)
+{
+ int err, c = cmd->opcode;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE: c |= RESP_NONE; break;
+ case MMC_RSP_R1: c |= RESP_R1; break;
+ case MMC_RSP_R1B: c |= RESP_R1B; break;
+ case MMC_RSP_R2: c |= RESP_R2; break;
+ case MMC_RSP_R3: c |= RESP_R3; break;
+ default:
+ return -EINVAL;
+ }
+
+ /* No interrupts so this may not be cleared */
+ sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND);
+
+ sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND |
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg);
+ sd_ctrl_write16(base, CTL_SD_CMD, c);
+
+
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) &
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+
+ err = sdhi_boot_wait_resp_end(base);
+ if (err)
+ return err;
+
+ cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE);
+
+ return 0;
+}
+
+static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity,
+ unsigned long block, unsigned short *buf)
+{
+ int err, i;
+
+ /* CMD17 - Read */
+ {
+ struct mmc_command cmd;
+
+ cmd.opcode = MMC_READ_SINGLE_BLOCK | \
+ TRANSFER_READ | DATA_PRESENT;
+ if (high_capacity)
+ cmd.arg = block;
+ else
+ cmd.arg = block * TMIO_BBS;
+ cmd.flags = MMC_RSP_R1;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ }
+
+ sd_ctrl_write32(base, CTL_IRQ_MASK,
+ ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY |
+ TMIO_STAT_TXUNDERRUN) &
+ sd_ctrl_read32(base, CTL_IRQ_MASK));
+ err = sdhi_boot_wait_resp_end(base);
+ if (err)
+ return err;
+
+ sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS);
+ for (i = 0; i < TMIO_BBS / sizeof(*buf); i++)
+ *buf++ = sd_ctrl_read16(base, RESP_CMD12);
+
+ err = sdhi_boot_wait_resp_end(base);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+int sdhi_boot_do_read(void __iomem *base, int high_capacity,
+ unsigned long offset, unsigned short count,
+ unsigned short *buf)
+{
+ unsigned long i;
+ int err = 0;
+
+ for (i = 0; i < count; i++) {
+ err = sdhi_boot_do_read_single(base, high_capacity, offset + i,
+ buf + (i * TMIO_BBS /
+ sizeof(*buf)));
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34)
+
+int sdhi_boot_init(void __iomem *base)
+{
+ bool sd_v2 = false, sd_v1_0 = false;
+ unsigned short cid;
+ int err, high_capacity = 0;
+
+ sdhi_boot_mmc_clk_stop(base);
+ sdhi_boot_reset(base);
+
+ /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */
+ {
+ struct mmc_ios ios;
+ ios.power_mode = MMC_POWER_ON;
+ ios.bus_width = MMC_BUS_WIDTH_1;
+ ios.clock = CLK_MMC_INIT;
+ err = sdhi_boot_mmc_set_ios(base, &ios);
+ if (err)
+ return err;
+ }
+
+ /* CMD0 */
+ {
+ struct mmc_command cmd;
+ msleep(1);
+ cmd.opcode = MMC_GO_IDLE_STATE;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_NONE;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ msleep(2);
+ }
+
+ /* CMD8 - Test for SD version 2 */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = SD_SEND_IF_COND;
+ cmd.arg = (VOLTAGES != 0) << 8 | 0xaa;
+ cmd.flags = MMC_RSP_R1;
+ err = sdhi_boot_request(base, &cmd); /* Ignore error */
+ if ((cmd.resp[0] & 0xff) == 0xaa)
+ sd_v2 = true;
+ }
+
+ /* CMD55 - Get OCR (SD) */
+ {
+ int timeout = 1000;
+ struct mmc_command cmd;
+
+ cmd.arg = 0;
+
+ do {
+ cmd.opcode = MMC_APP_CMD;
+ cmd.flags = MMC_RSP_R1;
+ cmd.arg = 0;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ break;
+
+ cmd.opcode = SD_APP_OP_COND;
+ cmd.flags = MMC_RSP_R3;
+ cmd.arg = (VOLTAGES & 0xff8000);
+ if (sd_v2)
+ cmd.arg |= OCR_HCS;
+ cmd.arg |= OCR_FASTBOOT;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ break;
+
+ msleep(1);
+ } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
+
+ if (!err && timeout) {
+ if (!sd_v2)
+ sd_v1_0 = true;
+ high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
+ }
+ }
+
+ /* CMD1 - Get OCR (MMC) */
+ if (!sd_v2 && !sd_v1_0) {
+ int timeout = 1000;
+ struct mmc_command cmd;
+
+ do {
+ cmd.opcode = MMC_SEND_OP_COND;
+ cmd.arg = VOLTAGES | OCR_HCS;
+ cmd.flags = MMC_RSP_R3;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+
+ msleep(1);
+ } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout);
+
+ if (!timeout)
+ return -EAGAIN;
+
+ high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS;
+ }
+
+ /* CMD2 - Get CID */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = MMC_ALL_SEND_CID;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R2;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ }
+
+ /* CMD3
+ * MMC: Set the relative address
+ * SD: Get the relative address
+ * Also puts the card into the standby state
+ */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = MMC_SET_RELATIVE_ADDR;
+ cmd.arg = 0;
+ cmd.flags = MMC_RSP_R1;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ cid = cmd.resp[0] >> 16;
+ }
+
+ /* CMD9 - Get CSD */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = MMC_SEND_CSD;
+ cmd.arg = cid << 16;
+ cmd.flags = MMC_RSP_R2;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ }
+
+ /* CMD7 - Select the card */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = MMC_SELECT_CARD;
+ //cmd.arg = rca << 16;
+ cmd.arg = cid << 16;
+ //cmd.flags = MMC_RSP_R1B;
+ cmd.flags = MMC_RSP_R1;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ }
+
+ /* CMD16 - Set the block size */
+ {
+ struct mmc_command cmd;
+ cmd.opcode = MMC_SET_BLOCKLEN;
+ cmd.arg = TMIO_BBS;
+ cmd.flags = MMC_RSP_R1;
+ err = sdhi_boot_request(base, &cmd);
+ if (err)
+ return err;
+ }
+
+ return high_capacity;
+}
--- /dev/null
+#ifndef SDHI_MOBILE_H
+#define SDHI_MOBILE_H
+
+#include <linux/compiler.h>
+
+int sdhi_boot_do_read(void __iomem *base, int high_capacity,
+ unsigned long offset, unsigned short count,
+ unsigned short *buf);
+int sdhi_boot_init(void __iomem *base);
+
+#endif
*(.text.*)
*(.fixup)
*(.gnu.warning)
+ *(.glue_7t)
+ *(.glue_7)
+ }
+ .rodata : {
*(.rodata)
*(.rodata.*)
- *(.glue_7)
- *(.glue_7t)
+ }
+ .piggydata : {
*(.piggydata)
- . = ALIGN(4);
}
+ . = ALIGN(4);
_etext = .;
+ .got.plt : { *(.got.plt) }
_got_start = .;
.got : { *(.got) }
_got_end = .;
- .got.plt : { *(.got.plt) }
_edata = .;
. = BSS_START;
struct dmabounce_pool large;
rwlock_t lock;
+
+ int (*needs_bounce)(struct device *, dma_addr_t, size_t);
};
#ifdef STATS
if (!dev || !dev->archdata.dmabounce)
return NULL;
if (dma_mapping_error(dev, dma_addr)) {
- if (dev)
- dev_err(dev, "Trying to %s invalid mapping\n", where);
- else
- pr_err("unknown device: Trying to %s invalid mapping\n", where);
+ dev_err(dev, "Trying to %s invalid mapping\n", where);
return NULL;
}
return find_safe_buffer(dev->archdata.dmabounce, dma_addr);
}
-static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction dir)
+static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
{
- struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
- dma_addr_t dma_addr;
- int needs_bounce = 0;
-
- if (device_info)
- DO_STATS ( device_info->map_op_count++ );
-
- dma_addr = virt_to_dma(dev, ptr);
+ if (!dev || !dev->archdata.dmabounce)
+ return 0;
if (dev->dma_mask) {
- unsigned long mask = *dev->dma_mask;
- unsigned long limit;
+ unsigned long limit, mask = *dev->dma_mask;
limit = (mask + 1) & ~mask;
if (limit && size > limit) {
dev_err(dev, "DMA mapping too big (requested %#x "
"mask %#Lx)\n", size, *dev->dma_mask);
- return ~0;
+ return -E2BIG;
}
- /*
- * Figure out if we need to bounce from the DMA mask.
- */
- needs_bounce = (dma_addr | (dma_addr + size - 1)) & ~mask;
+ /* Figure out if we need to bounce from the DMA mask. */
+ if ((dma_addr | (dma_addr + size - 1)) & ~mask)
+ return 1;
}
- if (device_info && (needs_bounce || dma_needs_bounce(dev, dma_addr, size))) {
- struct safe_buffer *buf;
+ return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size);
+}
- buf = alloc_safe_buffer(device_info, ptr, size, dir);
- if (buf == 0) {
- dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
- __func__, ptr);
- return ~0;
- }
+static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size,
+ enum dma_data_direction dir)
+{
+ struct dmabounce_device_info *device_info = dev->archdata.dmabounce;
+ struct safe_buffer *buf;
- dev_dbg(dev,
- "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
- buf->safe, buf->safe_dma_addr);
+ if (device_info)
+ DO_STATS ( device_info->map_op_count++ );
- if ((dir == DMA_TO_DEVICE) ||
- (dir == DMA_BIDIRECTIONAL)) {
- dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
- __func__, ptr, buf->safe, size);
- memcpy(buf->safe, ptr, size);
- }
- ptr = buf->safe;
+ buf = alloc_safe_buffer(device_info, ptr, size, dir);
+ if (buf == NULL) {
+ dev_err(dev, "%s: unable to map unsafe buffer %p!\n",
+ __func__, ptr);
+ return ~0;
+ }
- dma_addr = buf->safe_dma_addr;
- } else {
- /*
- * We don't need to sync the DMA buffer since
- * it was allocated via the coherent allocators.
- */
- __dma_single_cpu_to_dev(ptr, size, dir);
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
+
+ if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n",
+ __func__, ptr, buf->safe, size);
+ memcpy(buf->safe, ptr, size);
}
- return dma_addr;
+ return buf->safe_dma_addr;
}
-static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
+static inline void unmap_single(struct device *dev, struct safe_buffer *buf,
size_t size, enum dma_data_direction dir)
{
- struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap");
-
- if (buf) {
- BUG_ON(buf->size != size);
- BUG_ON(buf->direction != dir);
+ BUG_ON(buf->size != size);
+ BUG_ON(buf->direction != dir);
- dev_dbg(dev,
- "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
- __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
- buf->safe, buf->safe_dma_addr);
+ dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
+ __func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+ buf->safe, buf->safe_dma_addr);
- DO_STATS(dev->archdata.dmabounce->bounce_count++);
+ DO_STATS(dev->archdata.dmabounce->bounce_count++);
- if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
- void *ptr = buf->ptr;
+ if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ void *ptr = buf->ptr;
- dev_dbg(dev,
- "%s: copy back safe %p to unsafe %p size %d\n",
- __func__, buf->safe, ptr, size);
- memcpy(ptr, buf->safe, size);
+ dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n",
+ __func__, buf->safe, ptr, size);
+ memcpy(ptr, buf->safe, size);
- /*
- * Since we may have written to a page cache page,
- * we need to ensure that the data will be coherent
- * with user mappings.
- */
- __cpuc_flush_dcache_area(ptr, size);
- }
- free_safe_buffer(dev->archdata.dmabounce, buf);
- } else {
- __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir);
+ /*
+ * Since we may have written to a page cache page,
+ * we need to ensure that the data will be coherent
+ * with user mappings.
+ */
+ __cpuc_flush_dcache_area(ptr, size);
}
+ free_safe_buffer(dev->archdata.dmabounce, buf);
}
/* ************************************************** */
* substitute the safe buffer for the unsafe one.
* (basically move the buffer from an unsafe area to a safe one)
*/
-dma_addr_t __dma_map_single(struct device *dev, void *ptr, size_t size,
- enum dma_data_direction dir)
-{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, ptr, size, dir);
-
- BUG_ON(!valid_dma_direction(dir));
-
- return map_single(dev, ptr, size, dir);
-}
-EXPORT_SYMBOL(__dma_map_single);
-
-/*
- * see if a mapped address was really a "safe" buffer and if so, copy
- * the data from the safe buffer back to the unsafe buffer and free up
- * the safe buffer. (basically return things back to the way they
- * should be)
- */
-void __dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
- enum dma_data_direction dir)
-{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
-
- unmap_single(dev, dma_addr, size, dir);
-}
-EXPORT_SYMBOL(__dma_unmap_single);
-
dma_addr_t __dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
+ dma_addr_t dma_addr;
+ int ret;
+
dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n",
__func__, page, offset, size, dir);
- BUG_ON(!valid_dma_direction(dir));
+ dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset;
+
+ ret = needs_bounce(dev, dma_addr, size);
+ if (ret < 0)
+ return ~0;
+
+ if (ret == 0) {
+ __dma_page_cpu_to_dev(page, offset, size, dir);
+ return dma_addr;
+ }
if (PageHighMem(page)) {
- dev_err(dev, "DMA buffer bouncing of HIGHMEM pages "
- "is not supported\n");
+ dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n");
return ~0;
}
void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
enum dma_data_direction dir)
{
- dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
- __func__, (void *) dma_addr, size, dir);
+ struct safe_buffer *buf;
+
+ dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n",
+ __func__, dma_addr, size, dir);
+
+ buf = find_safe_buffer_dev(dev, dma_addr, __func__);
+ if (!buf) {
+ __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, dma_addr)),
+ dma_addr & ~PAGE_MASK, size, dir);
+ return;
+ }
- unmap_single(dev, dma_addr, size, dir);
+ unmap_single(dev, buf, size, dir);
}
EXPORT_SYMBOL(__dma_unmap_page);
}
int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size,
- unsigned long large_buffer_size)
+ unsigned long large_buffer_size,
+ int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t))
{
struct dmabounce_device_info *device_info;
int ret;
device_info->dev = dev;
INIT_LIST_HEAD(&device_info->safe_buffers);
rwlock_init(&device_info->lock);
+ device_info->needs_bounce = needs_bounce_fn;
#ifdef STATS
device_info->total_allocs = 0;
{
void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3);
unsigned int shift = (d->irq % 4) * 8;
- unsigned int cpu = cpumask_first(mask_val);
+ unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask);
u32 val, mask, bit;
- if (cpu >= 8)
+ if (cpu >= 8 || cpu >= nr_cpu_ids)
return -EINVAL;
mask = 0xff << shift;
bit = 1 << (cpu + shift);
spin_lock(&irq_controller_lock);
- d->node = cpu;
val = readl_relaxed(reg) & ~mask;
writel_relaxed(val | bit, reg);
spin_unlock(&irq_controller_lock);
- return 0;
+ return IRQ_SET_MASK_OK;
}
#endif
* ITE8152 chip can address up to 64MByte, so all the devices
* connected to ITE8152 (PCI and USB) should have limited DMA window
*/
+static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+ dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
+ __func__, dma_addr, size);
+ return (dma_addr + size - PHYS_OFFSET) >= SZ_64M;
+}
/*
* Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all
if (dev->dma_mask)
*dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET;
- dmabounce_register_dev(dev, 2048, 4096);
+ dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce);
}
return 0;
}
return 0;
}
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- dev_dbg(dev, "%s: dma_addr %08x, size %08x\n",
- __func__, dma_addr, size);
- return (dev->bus == &pci_bus_type) &&
- ((dma_addr + size - PHYS_OFFSET) >= SZ_64M);
-}
-
int dma_set_coherent_mask(struct device *dev, u64 mask)
{
if (mask >= PHYS_OFFSET + SZ_64M - 1)
sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2];
}
+#endif
+#ifdef CONFIG_DMABOUNCE
+/*
+ * According to the "Intel StrongARM SA-1111 Microprocessor Companion
+ * Chip Specification Update" (June 2000), erratum #7, there is a
+ * significant bug in the SA1111 SDRAM shared memory controller. If
+ * an access to a region of memory above 1MB relative to the bank base,
+ * it is important that address bit 10 _NOT_ be asserted. Depending
+ * on the configuration of the RAM, bit 10 may correspond to one
+ * of several different (processor-relative) address bits.
+ *
+ * This routine only identifies whether or not a given DMA address
+ * is susceptible to the bug.
+ *
+ * This should only get called for sa1111_device types due to the
+ * way we configure our device dma_masks.
+ */
+static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
+{
+ /*
+ * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
+ * User's Guide" mentions that jumpers R51 and R52 control the
+ * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
+ * SDRAM bank 1 on Neponset). The default configuration selects
+ * Assabet, so any address in bank 1 is necessarily invalid.
+ */
+ return (machine_is_assabet() || machine_is_pfs168()) &&
+ (addr >= 0xc8000000 || (addr + size) >= 0xc8000000);
+}
#endif
static void sa1111_dev_release(struct device *_dev)
dev->dev.dma_mask = &dev->dma_mask;
if (dev->dma_mask != 0xffffffffUL) {
- ret = dmabounce_register_dev(&dev->dev, 1024, 4096);
+ ret = dmabounce_register_dev(&dev->dev, 1024, 4096,
+ sa1111_needs_bounce);
if (ret) {
dev_err(&dev->dev, "SA1111: Failed to register"
" with dmabounce\n");
kfree(sachip);
}
-/*
- * According to the "Intel StrongARM SA-1111 Microprocessor Companion
- * Chip Specification Update" (June 2000), erratum #7, there is a
- * significant bug in the SA1111 SDRAM shared memory controller. If
- * an access to a region of memory above 1MB relative to the bank base,
- * it is important that address bit 10 _NOT_ be asserted. Depending
- * on the configuration of the RAM, bit 10 may correspond to one
- * of several different (processor-relative) address bits.
- *
- * This routine only identifies whether or not a given DMA address
- * is susceptible to the bug.
- *
- * This should only get called for sa1111_device types due to the
- * way we configure our device dma_masks.
- */
-int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size)
-{
- /*
- * Section 4.6 of the "Intel StrongARM SA-1111 Development Module
- * User's Guide" mentions that jumpers R51 and R52 control the
- * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or
- * SDRAM bank 1 on Neponset). The default configuration selects
- * Assabet, so any address in bank 1 is necessarily invalid.
- */
- return ((machine_is_assabet() || machine_is_pfs168()) &&
- (addr >= 0xc8000000 || (addr + size) >= 0xc8000000));
-}
-
struct sa1111_save_data {
unsigned int skcr;
unsigned int skpcr;
.macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f
usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort
.endm
+
+/* Utility macro for declaring string literals */
+ .macro string name:req, string
+ .type \name , #object
+\name:
+ .asciz "\string"
+ .size \name , . - \name
+ .endm
+
#endif /* __ASM_ASSEMBLER_H__ */
#include <linux/compiler.h>
#include <asm/system.h>
-#define smp_mb__before_clear_bit() mb()
-#define smp_mb__after_clear_bit() mb()
+#define smp_mb__before_clear_bit() smp_mb()
+#define smp_mb__after_clear_bit() smp_mb()
/*
* These functions are the basis of our bit ops.
___dma_page_dev_to_cpu(page, off, size, dir);
}
-/*
- * Return whether the given device DMA address mask can be supported
- * properly. For example, if your device can only drive the low 24-bits
- * during bus mastering, then you would pass 0x00ffffff as the mask
- * to this function.
- *
- * FIXME: This should really be a platform specific issue - we should
- * return false if GFP_DMA allocations may not satisfy the supplied 'mask'.
- */
-static inline int dma_supported(struct device *dev, u64 mask)
-{
- if (mask < ISA_DMA_THRESHOLD)
- return 0;
- return 1;
-}
-
-static inline int dma_set_mask(struct device *dev, u64 dma_mask)
-{
-#ifdef CONFIG_DMABOUNCE
- if (dev->archdata.dmabounce) {
- if (dma_mask >= ISA_DMA_THRESHOLD)
- return 0;
- else
- return -EIO;
- }
-#endif
- if (!dev->dma_mask || !dma_supported(dev, dma_mask))
- return -EIO;
-
- *dev->dma_mask = dma_mask;
-
- return 0;
-}
+extern int dma_supported(struct device *, u64);
+extern int dma_set_mask(struct device *, u64);
/*
* DMA errors are defined by all-bits-set in the DMA address.
* @dev: valid struct device pointer
* @small_buf_size: size of buffers to use with small buffer pool
* @large_buf_size: size of buffers to use with large buffer pool (can be 0)
+ * @needs_bounce_fn: called to determine whether buffer needs bouncing
*
* This function should be called by low-level platform code to register
* a device as requireing DMA buffer bouncing. The function will allocate
* appropriate DMA pools for the device.
- *
*/
extern int dmabounce_register_dev(struct device *, unsigned long,
- unsigned long);
+ unsigned long, int (*)(struct device *, dma_addr_t, size_t));
/**
* dmabounce_unregister_dev
*/
extern void dmabounce_unregister_dev(struct device *);
-/**
- * dma_needs_bounce
- *
- * @dev: valid struct device pointer
- * @dma_handle: dma_handle of unbounced buffer
- * @size: size of region being mapped
- *
- * Platforms that utilize the dmabounce mechanism must implement
- * this function.
- *
- * The dmabounce routines call this function whenever a dma-mapping
- * is requested to determine whether a given buffer needs to be bounced
- * or not. The function must return 0 if the buffer is OK for
- * DMA access and 1 if the buffer needs to be bounced.
- *
- */
-extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
-
/*
* The DMA API, implemented by dmabounce.c. See below for descriptions.
*/
-extern dma_addr_t __dma_map_single(struct device *, void *, size_t,
- enum dma_data_direction);
-extern void __dma_unmap_single(struct device *, dma_addr_t, size_t,
- enum dma_data_direction);
extern dma_addr_t __dma_map_page(struct device *, struct page *,
unsigned long, size_t, enum dma_data_direction);
extern void __dma_unmap_page(struct device *, dma_addr_t, size_t,
}
-static inline dma_addr_t __dma_map_single(struct device *dev, void *cpu_addr,
- size_t size, enum dma_data_direction dir)
-{
- __dma_single_cpu_to_dev(cpu_addr, size, dir);
- return virt_to_dma(dev, cpu_addr);
-}
-
static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction dir)
{
return pfn_to_dma(dev, page_to_pfn(page)) + offset;
}
-static inline void __dma_unmap_single(struct device *dev, dma_addr_t handle,
- size_t size, enum dma_data_direction dir)
-{
- __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir);
-}
-
static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle,
size_t size, enum dma_data_direction dir)
{
static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr,
size_t size, enum dma_data_direction dir)
{
+ unsigned long offset;
+ struct page *page;
dma_addr_t addr;
+ BUG_ON(!virt_addr_valid(cpu_addr));
+ BUG_ON(!virt_addr_valid(cpu_addr + size - 1));
BUG_ON(!valid_dma_direction(dir));
- addr = __dma_map_single(dev, cpu_addr, size, dir);
- debug_dma_map_page(dev, virt_to_page(cpu_addr),
- (unsigned long)cpu_addr & ~PAGE_MASK, size,
- dir, addr, true);
+ page = virt_to_page(cpu_addr);
+ offset = (unsigned long)cpu_addr & ~PAGE_MASK;
+ addr = __dma_map_page(dev, page, offset, size, dir);
+ debug_dma_map_page(dev, page, offset, size, dir, addr, true);
return addr;
}
size_t size, enum dma_data_direction dir)
{
debug_dma_unmap_page(dev, handle, size, dir, true);
- __dma_unmap_single(dev, handle, size, dir);
+ __dma_unmap_page(dev, handle, size, dir);
}
/**
#ifndef __ASM_ARM_DMA_H
#define __ASM_ARM_DMA_H
-#include <asm/memory.h>
-
/*
* This is the maximum virtual address which can be DMA'd from.
*/
-#ifndef ARM_DMA_ZONE_SIZE
-#define MAX_DMA_ADDRESS 0xffffffff
+#ifndef CONFIG_ZONE_DMA
+#define MAX_DMA_ADDRESS 0xffffffffUL
#else
-#define MAX_DMA_ADDRESS (PAGE_OFFSET + ARM_DMA_ZONE_SIZE)
+#define MAX_DMA_ADDRESS ({ \
+ extern unsigned long arm_dma_zone_size; \
+ arm_dma_zone_size ? \
+ (PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; })
#endif
#ifdef CONFIG_ISA_DMA_API
* Interrupt handling. Preserves r7, r8, r9
*/
.macro arch_irq_handler_default
- get_irqnr_preamble r5, lr
-1: get_irqnr_and_base r0, r6, r5, lr
+ get_irqnr_preamble r6, lr
+1: get_irqnr_and_base r0, r2, r6, lr
movne r1, sp
@
@ routine called with r0 = irq number, r1 = struct pt_regs *
/*
* XXX
*
- * this macro assumes that irqstat (r6) and base (r5) are
+ * this macro assumes that irqstat (r2) and base (r6) are
* preserved from get_irqnr_and_base above
*/
- ALT_SMP(test_for_ipi r0, r6, r5, lr)
+ ALT_SMP(test_for_ipi r0, r2, r6, lr)
ALT_UP_B(9997f)
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r6, r5, lr
+ test_for_ltirq r0, r2, r6, lr
movne r0, sp
adrne lr, BSYM(1b)
bne do_local_timer
.align 5
.global \symbol_name
\symbol_name:
- mov r4, lr
+ mov r8, lr
arch_irq_handler_default
- mov pc, r4
+ mov pc, r8
.endm
/*
* HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP
*/
-#define HWCAP_SWP 1
-#define HWCAP_HALF 2
-#define HWCAP_THUMB 4
-#define HWCAP_26BIT 8 /* Play it safe */
-#define HWCAP_FAST_MULT 16
-#define HWCAP_FPA 32
-#define HWCAP_VFP 64
-#define HWCAP_EDSP 128
-#define HWCAP_JAVA 256
-#define HWCAP_IWMMXT 512
-#define HWCAP_CRUNCH 1024
-#define HWCAP_THUMBEE 2048
-#define HWCAP_NEON 4096
-#define HWCAP_VFPv3 8192
-#define HWCAP_VFPv3D16 16384
-#define HWCAP_TLS 32768
+#define HWCAP_SWP (1 << 0)
+#define HWCAP_HALF (1 << 1)
+#define HWCAP_THUMB (1 << 2)
+#define HWCAP_26BIT (1 << 3) /* Play it safe */
+#define HWCAP_FAST_MULT (1 << 4)
+#define HWCAP_FPA (1 << 5)
+#define HWCAP_VFP (1 << 6)
+#define HWCAP_EDSP (1 << 7)
+#define HWCAP_JAVA (1 << 8)
+#define HWCAP_IWMMXT (1 << 9)
+#define HWCAP_CRUNCH (1 << 10)
+#define HWCAP_THUMBEE (1 << 11)
+#define HWCAP_NEON (1 << 12)
+#define HWCAP_VFPv3 (1 << 13)
+#define HWCAP_VFPv3D16 (1 << 14)
+#define HWCAP_TLS (1 << 15)
+#define HWCAP_VFPv4 (1 << 16)
+#define HWCAP_IDIVA (1 << 17)
+#define HWCAP_IDIVT (1 << 18)
+#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT)
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
/*
#define MAX_INSN_SIZE 2
#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
-/*
- * This undefined instruction must be unique and
- * reserved solely for kprobes' use.
- */
-#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8
-
#define regs_return_value(regs) ((regs)->ARM_r0)
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
struct kprobe;
typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *);
-
typedef unsigned long (kprobe_check_cc)(unsigned long);
+typedef void (kprobe_insn_singlestep_t)(struct kprobe *, struct pt_regs *);
+typedef void (kprobe_insn_fn_t)(void);
/* Architecture specific copy of original instruction. */
struct arch_specific_insn {
- kprobe_opcode_t *insn;
- kprobe_insn_handler_t *insn_handler;
- kprobe_check_cc *insn_check_cc;
+ kprobe_opcode_t *insn;
+ kprobe_insn_handler_t *insn_handler;
+ kprobe_check_cc *insn_check_cc;
+ kprobe_insn_singlestep_t *insn_singlestep;
+ kprobe_insn_fn_t *insn_fn;
};
struct prev_kprobe {
};
void arch_remove_kprobe(struct kprobe *);
-void kretprobe_trampoline(void);
-
int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr);
int kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data);
-enum kprobe_insn {
- INSN_REJECTED,
- INSN_GOOD,
- INSN_GOOD_NO_SLOT
-};
-
-enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
- struct arch_specific_insn *);
-void __init arm_kprobe_decode_init(void);
#endif /* _ARM_KPROBES_H */
unsigned int nr_irqs; /* number of IRQs */
+#ifdef CONFIG_ZONE_DMA
+ unsigned long dma_zone_size; /* size of DMA-able area */
+#endif
+
unsigned int video_start; /* start of video RAM */
unsigned int video_end; /* end of video RAM */
#define PHYS_OFFSET PLAT_PHYS_OFFSET
#endif
-/*
- * The DMA mask corresponding to the maximum bus address allocatable
- * using GFP_DMA. The default here places no restriction on DMA
- * allocations. This must be the smallest DMA mask in the system,
- * so a successful GFP_DMA allocation will always satisfy this.
- */
-#ifndef ARM_DMA_ZONE_SIZE
-#define ISA_DMA_THRESHOLD (0xffffffffULL)
-#else
-#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1)
-#endif
-
/*
* PFNs are used to describe any physical page; this means
* PFN 0 == physical address 0.
ARM_PERF_PMU_ID_V6MP,
ARM_PERF_PMU_ID_CA8,
ARM_PERF_PMU_ID_CA9,
+ ARM_PERF_PMU_ID_CA5,
+ ARM_PERF_PMU_ID_CA15,
ARM_NUM_PMU_IDS,
};
* a cookie.
*/
extern int
-release_pmu(struct platform_device *pdev);
+release_pmu(enum arm_pmu_type type);
/**
* init_pmu() - Initialise the PMU.
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
#else
-#define cpu_proc_init() processor._proc_init()
-#define cpu_proc_fin() processor._proc_fin()
-#define cpu_reset(addr) processor.reset(addr)
-#define cpu_do_idle() processor._do_idle()
-#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz)
-#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext)
-#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm)
+#define cpu_proc_init processor._proc_init
+#define cpu_proc_fin processor._proc_fin
+#define cpu_reset processor.reset
+#define cpu_do_idle processor._do_idle
+#define cpu_dcache_clean_area processor.dcache_clean_area
+#define cpu_set_pte_ext processor.set_pte_ext
+#define cpu_do_switch_mm processor.switch_mm
#endif
extern void cpu_resume(void);
#define PSR_c 0x000000ff /* Control */
/*
- * ARMv7 groups of APSR bits
+ * ARMv7 groups of PSR bits
*/
+#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */
#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
#define predicate(x) ((x) & 0xf0000000)
#define PREDICATE_ALWAYS 0xe0000000
+/*
+ * True if instr is a 32-bit thumb instruction. This works if instr
+ * is the first or only half-word of a thumb instruction. It also works
+ * when instr holds all 32-bits of a wide thumb instruction if stored
+ * in the form (first_half<<16)|(second_half)
+ */
+#define is_wide_instruction(instr) ((unsigned)(instr) >= 0xe800)
+
/*
* kprobe-based event tracer support
*/
#ifndef _ASMARM_SCATTERLIST_H
#define _ASMARM_SCATTERLIST_H
+#ifdef CONFIG_ARM_HAS_SG_CHAIN
+#define ARCH_HAS_SG_CHAIN
+#endif
+
#include <asm/memory.h>
#include <asm/types.h>
#include <asm-generic/scatterlist.h>
#define __tag __used __attribute__((__section__(".taglist.init")))
#define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
+static const struct tagtable __tagtable_##fn __tag = { tag, fn }
/*
* Memory map description
*/
-#define NR_BANKS 8
+#ifdef CONFIG_ARCH_EP93XX
+# define NR_BANKS 16
+#else
+# define NR_BANKS 8
+#endif
struct membank {
phys_addr_t start;
--- /dev/null
+#ifndef __ASM_ARM_SUSPEND_H
+#define __ASM_ARM_SUSPEND_H
+
+#include <asm/memory.h>
+#include <asm/tlbflush.h>
+
+extern void cpu_resume(void);
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+ extern int __cpu_suspend(int, long, unsigned long,
+ int (*)(unsigned long));
+ int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
+ flush_tlb_all();
+ return ret;
+}
+
+#endif
void *tcm_alloc(size_t len);
void tcm_free(void *addr, size_t len);
+bool tcm_dtcm_present(void);
+bool tcm_itcm_present(void);
#endif
#define TLB_V6_D_ASID (1 << 17)
#define TLB_V6_I_ASID (1 << 18)
-#define TLB_BTB (1 << 28)
-
/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
#define TLB_V7_UIS_PAGE (1 << 19)
#define TLB_V7_UIS_FULL (1 << 20)
#define TLB_V7_UIS_ASID (1 << 21)
-/* Inner Shareable BTB operation (ARMv7 MP extensions) */
-#define TLB_V7_IS_BTB (1 << 22)
-
+#define TLB_BARRIER (1 << 28)
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
* fr - Feroceon (v4wbi with non-outer-cacheable page table walks)
- * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB))
+ * fa - Faraday (v4 with write buffer with UTLB)
* v6wbi - ARMv6 with write buffer with I TLB flush entry instruction
* v7wbi - identical to v6wbi
*/
# define v4_always_flags (-1UL)
#endif
-#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \
+#define fa_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
TLB_V4_U_FULL | TLB_V4_U_PAGE)
#ifdef CONFIG_CPU_TLB_FA
# define v4wb_always_flags (-1UL)
#endif
-#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
TLB_V6_I_FULL | TLB_V6_D_FULL | \
TLB_V6_I_PAGE | TLB_V6_D_PAGE | \
TLB_V6_I_ASID | TLB_V6_D_ASID)
# define v6wbi_always_flags (-1UL)
#endif
-#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
+#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
-#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \
TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
#ifdef CONFIG_CPU_TLB_V7
if (tlb_flag(TLB_V7_UIS_FULL))
asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
- if (tlb_flag(TLB_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- isb();
- }
- if (tlb_flag(TLB_V7_IS_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_BARRIER)) {
dsb();
isb();
}
asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
#endif
- if (tlb_flag(TLB_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- }
- if (tlb_flag(TLB_V7_IS_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_BARRIER))
dsb();
- isb();
- }
}
static inline void
asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
#endif
- if (tlb_flag(TLB_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- }
- if (tlb_flag(TLB_V7_IS_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_BARRIER))
dsb();
- isb();
- }
}
static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
if (tlb_flag(TLB_V7_UIS_PAGE))
asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
- if (tlb_flag(TLB_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
- dsb();
- isb();
- }
- if (tlb_flag(TLB_V7_IS_BTB)) {
- /* flush the branch target cache */
- asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_BARRIER)) {
dsb();
isb();
}
#include <linux/list.h>
+struct pt_regs;
+struct task_struct;
+
struct undef_hook {
struct list_head node;
u32 instr_mask;
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
-obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
+obj-$(CONFIG_KPROBES) += kprobes.o kprobes-common.o
+ifdef CONFIG_THUMB2_KERNEL
+obj-$(CONFIG_KPROBES) += kprobes-thumb.o
+else
+obj-$(CONFIG_KPROBES) += kprobes-arm.o
+endif
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value));
DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate));
DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate));
+#ifdef CONFIG_SMP
+ DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu));
+#endif
#ifdef CONFIG_ARM_THUMBEE
DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state));
#endif
#include <asm/entry-macro-multi.S>
/*
- * Interrupt handling. Preserves r7, r8, r9
+ * Interrupt handling.
*/
.macro irq_handler
#ifdef CONFIG_MULTI_IRQ_HANDLER
- ldr r5, =handle_arch_irq
+ ldr r1, =handle_arch_irq
mov r0, sp
- ldr r5, [r5]
+ ldr r1, [r1]
adr lr, BSYM(9997f)
- teq r5, #0
- movne pc, r5
+ teq r1, #0
+ movne pc, r1
#endif
arch_irq_handler_default
9997:
.endm
+ .macro pabt_helper
+ @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5
+#ifdef MULTI_PABORT
+ ldr ip, .LCprocfns
+ mov lr, pc
+ ldr pc, [ip, #PROCESSOR_PABT_FUNC]
+#else
+ bl CPU_PABORT_HANDLER
+#endif
+ .endm
+
+ .macro dabt_helper
+
+ @
+ @ Call the processor-specific abort handler:
+ @
+ @ r2 - pt_regs
+ @ r4 - aborted context pc
+ @ r5 - aborted context psr
+ @
+ @ The abort handler must return the aborted address in r0, and
+ @ the fault status register in r1. r9 must be preserved.
+ @
+#ifdef MULTI_DABORT
+ ldr ip, .LCprocfns
+ mov lr, pc
+ ldr pc, [ip, #PROCESSOR_DABT_FUNC]
+#else
+ bl CPU_DABORT_HANDLER
+#endif
+ .endm
+
#ifdef CONFIG_KPROBES
.section .kprobes.text,"ax",%progbits
#else
SPFIX( subeq sp, sp, #4 )
stmia sp, {r1 - r12}
- ldmia r0, {r1 - r3}
- add r5, sp, #S_SP - 4 @ here for interlock avoidance
- mov r4, #-1 @ "" "" "" ""
- add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4)
- SPFIX( addeq r0, r0, #4 )
- str r1, [sp, #-4]! @ save the "real" r0 copied
+ ldmia r0, {r3 - r5}
+ add r7, sp, #S_SP - 4 @ here for interlock avoidance
+ mov r6, #-1 @ "" "" "" ""
+ add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+ SPFIX( addeq r2, r2, #4 )
+ str r3, [sp, #-4]! @ save the "real" r0 copied
@ from the exception stack
- mov r1, lr
+ mov r3, lr
@
@ We are now ready to fill in the remaining blanks on the stack:
@
- @ r0 - sp_svc
- @ r1 - lr_svc
- @ r2 - lr_<exception>, already fixed up for correct return/restart
- @ r3 - spsr_<exception>
- @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
+ @ r2 - sp_svc
+ @ r3 - lr_svc
+ @ r4 - lr_<exception>, already fixed up for correct return/restart
+ @ r5 - spsr_<exception>
+ @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
@
- stmia r5, {r0 - r4}
+ stmia r7, {r2 - r6}
+
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bl trace_hardirqs_off
+#endif
.endm
.align 5
__dabt_svc:
svc_entry
-
- @
- @ get ready to re-enable interrupts if appropriate
- @
- mrs r9, cpsr
- tst r3, #PSR_I_BIT
- biceq r9, r9, #PSR_I_BIT
-
- @
- @ Call the processor-specific abort handler:
- @
- @ r2 - aborted context pc
- @ r3 - aborted context cpsr
- @
- @ The abort handler must return the aborted address in r0, and
- @ the fault status register in r1. r9 must be preserved.
- @
-#ifdef MULTI_DABORT
- ldr r4, .LCprocfns
- mov lr, pc
- ldr pc, [r4, #PROCESSOR_DABT_FUNC]
-#else
- bl CPU_DABORT_HANDLER
-#endif
-
- @
- @ set desired IRQ state, then call main handler
- @
- debug_entry r1
- msr cpsr_c, r9
mov r2, sp
- bl do_DataAbort
+ dabt_helper
@
@ IRQs off again before pulling preserved data off the stack
@
disable_irq_notrace
- @
- @ restore SPSR and restart the instruction
- @
- ldr r2, [sp, #S_PSR]
- svc_exit r2 @ return from exception
+#ifdef CONFIG_TRACE_IRQFLAGS
+ tst r5, #PSR_I_BIT
+ bleq trace_hardirqs_on
+ tst r5, #PSR_I_BIT
+ blne trace_hardirqs_off
+#endif
+ svc_exit r5 @ return from exception
UNWIND(.fnend )
ENDPROC(__dabt_svc)
.align 5
__irq_svc:
svc_entry
+ irq_handler
-#ifdef CONFIG_TRACE_IRQFLAGS
- bl trace_hardirqs_off
-#endif
#ifdef CONFIG_PREEMPT
get_thread_info tsk
ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
- add r7, r8, #1 @ increment it
- str r7, [tsk, #TI_PREEMPT]
-#endif
-
- irq_handler
-#ifdef CONFIG_PREEMPT
- str r8, [tsk, #TI_PREEMPT] @ restore preempt count
ldr r0, [tsk, #TI_FLAGS] @ get flags
teq r8, #0 @ if preempt count != 0
movne r0, #0 @ force flags to 0
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
#endif
- ldr r4, [sp, #S_PSR] @ irqs are already disabled
+
#ifdef CONFIG_TRACE_IRQFLAGS
- tst r4, #PSR_I_BIT
- bleq trace_hardirqs_on
+ @ The parent context IRQs must have been enabled to get here in
+ @ the first place, so there's no point checking the PSR I bit.
+ bl trace_hardirqs_on
#endif
- svc_exit r4 @ return from exception
+ svc_exit r5 @ return from exception
UNWIND(.fnend )
ENDPROC(__irq_svc)
#else
svc_entry
#endif
-
@
@ call emulation code, which returns using r9 if it has emulated
@ the instruction, or the more conventional lr if we are to treat
@ r0 - instruction
@
#ifndef CONFIG_THUMB2_KERNEL
- ldr r0, [r2, #-4]
+ ldr r0, [r4, #-4]
#else
- ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2
+ ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2
and r9, r0, #0xf800
cmp r9, #0xe800 @ 32-bit instruction if xx >= 0
- ldrhhs r9, [r2] @ bottom 16 bits
+ ldrhhs r9, [r4] @ bottom 16 bits
orrhs r0, r9, r0, lsl #16
#endif
adr r9, BSYM(1f)
+ mov r2, r4
bl call_fpe
mov r0, sp @ struct pt_regs *regs
@
@ restore SPSR and restart the instruction
@
- ldr r2, [sp, #S_PSR] @ Get SVC cpsr
- svc_exit r2 @ return from exception
+ ldr r5, [sp, #S_PSR] @ Get SVC cpsr
+#ifdef CONFIG_TRACE_IRQFLAGS
+ tst r5, #PSR_I_BIT
+ bleq trace_hardirqs_on
+ tst r5, #PSR_I_BIT
+ blne trace_hardirqs_off
+#endif
+ svc_exit r5 @ return from exception
UNWIND(.fnend )
ENDPROC(__und_svc)
.align 5
__pabt_svc:
svc_entry
-
- @
- @ re-enable interrupts if appropriate
- @
- mrs r9, cpsr
- tst r3, #PSR_I_BIT
- biceq r9, r9, #PSR_I_BIT
-
- mov r0, r2 @ pass address of aborted instruction.
-#ifdef MULTI_PABORT
- ldr r4, .LCprocfns
- mov lr, pc
- ldr pc, [r4, #PROCESSOR_PABT_FUNC]
-#else
- bl CPU_PABORT_HANDLER
-#endif
- debug_entry r1
- msr cpsr_c, r9 @ Maybe enable interrupts
mov r2, sp @ regs
- bl do_PrefetchAbort @ call abort handler
+ pabt_helper
@
@ IRQs off again before pulling preserved data off the stack
@
disable_irq_notrace
- @
- @ restore SPSR and restart the instruction
- @
- ldr r2, [sp, #S_PSR]
- svc_exit r2 @ return from exception
+#ifdef CONFIG_TRACE_IRQFLAGS
+ tst r5, #PSR_I_BIT
+ bleq trace_hardirqs_on
+ tst r5, #PSR_I_BIT
+ blne trace_hardirqs_off
+#endif
+ svc_exit r5 @ return from exception
UNWIND(.fnend )
ENDPROC(__pabt_svc)
ARM( stmib sp, {r1 - r12} )
THUMB( stmia sp, {r0 - r12} )
- ldmia r0, {r1 - r3}
+ ldmia r0, {r3 - r5}
add r0, sp, #S_PC @ here for interlock avoidance
- mov r4, #-1 @ "" "" "" ""
+ mov r6, #-1 @ "" "" "" ""
- str r1, [sp] @ save the "real" r0 copied
+ str r3, [sp] @ save the "real" r0 copied
@ from the exception stack
@
@ We are now ready to fill in the remaining blanks on the stack:
@
- @ r2 - lr_<exception>, already fixed up for correct return/restart
- @ r3 - spsr_<exception>
- @ r4 - orig_r0 (see pt_regs definition in ptrace.h)
+ @ r4 - lr_<exception>, already fixed up for correct return/restart
+ @ r5 - spsr_<exception>
+ @ r6 - orig_r0 (see pt_regs definition in ptrace.h)
@
@ Also, separately save sp_usr and lr_usr
@
- stmia r0, {r2 - r4}
+ stmia r0, {r4 - r6}
ARM( stmdb r0, {sp, lr}^ )
THUMB( store_user_sp_lr r0, r1, S_SP - S_PC )
@ Clear FP to mark the first stack frame
@
zero_fp
+
+#ifdef CONFIG_IRQSOFF_TRACER
+ bl trace_hardirqs_off
+#endif
.endm
.macro kuser_cmpxchg_check
-#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
#ifndef CONFIG_MMU
#warning "NPTL on non MMU needs fixing"
#else
@ if it was interrupted in a critical region. Here we
@ perform a quick test inline since it should be false
@ 99.9999% of the time. The rest is done out of line.
- cmp r2, #TASK_SIZE
- blhs kuser_cmpxchg_fixup
+ cmp r4, #TASK_SIZE
+ blhs kuser_cmpxchg64_fixup
#endif
#endif
.endm
__dabt_usr:
usr_entry
kuser_cmpxchg_check
-
- @
- @ Call the processor-specific abort handler:
- @
- @ r2 - aborted context pc
- @ r3 - aborted context cpsr
- @
- @ The abort handler must return the aborted address in r0, and
- @ the fault status register in r1.
- @
-#ifdef MULTI_DABORT
- ldr r4, .LCprocfns
- mov lr, pc
- ldr pc, [r4, #PROCESSOR_DABT_FUNC]
-#else
- bl CPU_DABORT_HANDLER
-#endif
-
- @
- @ IRQs on, then call the main handler
- @
- debug_entry r1
- enable_irq
mov r2, sp
- adr lr, BSYM(ret_from_exception)
- b do_DataAbort
+ dabt_helper
+ b ret_from_exception
UNWIND(.fnend )
ENDPROC(__dabt_usr)
__irq_usr:
usr_entry
kuser_cmpxchg_check
-
-#ifdef CONFIG_IRQSOFF_TRACER
- bl trace_hardirqs_off
-#endif
-
- get_thread_info tsk
-#ifdef CONFIG_PREEMPT
- ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
- add r7, r8, #1 @ increment it
- str r7, [tsk, #TI_PREEMPT]
-#endif
-
irq_handler
-#ifdef CONFIG_PREEMPT
- ldr r0, [tsk, #TI_PREEMPT]
- str r8, [tsk, #TI_PREEMPT]
- teq r0, r7
- ARM( strne r0, [r0, -r0] )
- THUMB( movne r0, #0 )
- THUMB( strne r0, [r0] )
-#endif
-
+ get_thread_info tsk
mov why, #0
b ret_to_user_from_irq
UNWIND(.fnend )
__und_usr:
usr_entry
+ mov r2, r4
+ mov r3, r5
+
@
@ fall through to the emulation code, which returns using r9 if
@ it has emulated the instruction, or the more conventional lr
.align 5
__pabt_usr:
usr_entry
-
- mov r0, r2 @ pass address of aborted instruction.
-#ifdef MULTI_PABORT
- ldr r4, .LCprocfns
- mov lr, pc
- ldr pc, [r4, #PROCESSOR_PABT_FUNC]
-#else
- bl CPU_PABORT_HANDLER
-#endif
- debug_entry r1
- enable_irq @ Enable interrupts
mov r2, sp @ regs
- bl do_PrefetchAbort @ call abort handler
+ pabt_helper
UNWIND(.fnend )
/* fall through */
/*
/*
* User helpers.
*
- * These are segment of kernel provided user code reachable from user space
- * at a fixed address in kernel memory. This is used to provide user space
- * with some operations which require kernel help because of unimplemented
- * native feature and/or instructions in many ARM CPUs. The idea is for
- * this code to be executed directly in user mode for best efficiency but
- * which is too intimate with the kernel counter part to be left to user
- * libraries. In fact this code might even differ from one CPU to another
- * depending on the available instruction set and restrictions like on
- * SMP systems. In other words, the kernel reserves the right to change
- * this code as needed without warning. Only the entry points and their
- * results are guaranteed to be stable.
- *
* Each segment is 32-byte aligned and will be moved to the top of the high
* vector page. New segments (if ever needed) must be added in front of
* existing ones. This mechanism should be used only for things that are
* really small and justified, and not be abused freely.
*
- * User space is expected to implement those things inline when optimizing
- * for a processor that has the necessary native support, but only if such
- * resulting binaries are already to be incompatible with earlier ARM
- * processors due to the use of unsupported instructions other than what
- * is provided here. In other words don't make binaries unable to run on
- * earlier processors just for the sake of not using these kernel helpers
- * if your compiled code is not going to use the new instructions for other
- * purpose.
+ * See Documentation/arm/kernel_user_helpers.txt for formal definitions.
*/
THUMB( .arm )
__kuser_helper_start:
/*
- * Reference prototype:
- *
- * void __kernel_memory_barrier(void)
- *
- * Input:
- *
- * lr = return address
- *
- * Output:
- *
- * none
- *
- * Clobbered:
- *
- * none
- *
- * Definition and user space usage example:
- *
- * typedef void (__kernel_dmb_t)(void);
- * #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0)
- *
- * Apply any needed memory barrier to preserve consistency with data modified
- * manually and __kuser_cmpxchg usage.
- *
- * This could be used as follows:
- *
- * #define __kernel_dmb() \
- * asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \
- * : : : "r0", "lr","cc" )
+ * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular
+ * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point.
*/
-__kuser_memory_barrier: @ 0xffff0fa0
+__kuser_cmpxchg64: @ 0xffff0f60
+
+#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
+
+ /*
+ * Poor you. No fast solution possible...
+ * The kernel itself must perform the operation.
+ * A special ghost syscall is used for that (see traps.c).
+ */
+ stmfd sp!, {r7, lr}
+ ldr r7, 1f @ it's 20 bits
+ swi __ARM_NR_cmpxchg64
+ ldmfd sp!, {r7, pc}
+1: .word __ARM_NR_cmpxchg64
+
+#elif defined(CONFIG_CPU_32v6K)
+
+ stmfd sp!, {r4, r5, r6, r7}
+ ldrd r4, r5, [r0] @ load old val
+ ldrd r6, r7, [r1] @ load new val
+ smp_dmb arm
+1: ldrexd r0, r1, [r2] @ load current val
+ eors r3, r0, r4 @ compare with oldval (1)
+ eoreqs r3, r1, r5 @ compare with oldval (2)
+ strexdeq r3, r6, r7, [r2] @ store newval if eq
+ teqeq r3, #1 @ success?
+ beq 1b @ if no then retry
smp_dmb arm
+ rsbs r0, r3, #0 @ set returned val and C flag
+ ldmfd sp!, {r4, r5, r6, r7}
+ bx lr
+
+#elif !defined(CONFIG_SMP)
+
+#ifdef CONFIG_MMU
+
+ /*
+ * The only thing that can break atomicity in this cmpxchg64
+ * implementation is either an IRQ or a data abort exception
+ * causing another process/thread to be scheduled in the middle of
+ * the critical sequence. The same strategy as for cmpxchg is used.
+ */
+ stmfd sp!, {r4, r5, r6, lr}
+ ldmia r0, {r4, r5} @ load old val
+ ldmia r1, {r6, lr} @ load new val
+1: ldmia r2, {r0, r1} @ load current val
+ eors r3, r0, r4 @ compare with oldval (1)
+ eoreqs r3, r1, r5 @ compare with oldval (2)
+2: stmeqia r2, {r6, lr} @ store newval if eq
+ rsbs r0, r3, #0 @ set return val and C flag
+ ldmfd sp!, {r4, r5, r6, pc}
+
+ .text
+kuser_cmpxchg64_fixup:
+ @ Called from kuser_cmpxchg_fixup.
+ @ r4 = address of interrupted insn (must be preserved).
+ @ sp = saved regs. r7 and r8 are clobbered.
+ @ 1b = first critical insn, 2b = last critical insn.
+ @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
+ mov r7, #0xffff0fff
+ sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64)))
+ subs r8, r4, r7
+ rsbcss r8, r8, #(2b - 1b)
+ strcs r7, [sp, #S_PC]
+#if __LINUX_ARM_ARCH__ < 6
+ bcc kuser_cmpxchg32_fixup
+#endif
+ mov pc, lr
+ .previous
+
+#else
+#warning "NPTL on non MMU needs fixing"
+ mov r0, #-1
+ adds r0, r0, #0
usr_ret lr
+#endif
+
+#else
+#error "incoherent kernel configuration"
+#endif
+
+ /* pad to next slot */
+ .rept (16 - (. - __kuser_cmpxchg64)/4)
+ .word 0
+ .endr
.align 5
-/*
- * Reference prototype:
- *
- * int __kernel_cmpxchg(int oldval, int newval, int *ptr)
- *
- * Input:
- *
- * r0 = oldval
- * r1 = newval
- * r2 = ptr
- * lr = return address
- *
- * Output:
- *
- * r0 = returned value (zero or non-zero)
- * C flag = set if r0 == 0, clear if r0 != 0
- *
- * Clobbered:
- *
- * r3, ip, flags
- *
- * Definition and user space usage example:
- *
- * typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr);
- * #define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0)
- *
- * Atomically store newval in *ptr if *ptr is equal to oldval for user space.
- * Return zero if *ptr was changed or non-zero if no exchange happened.
- * The C flag is also set if *ptr was changed to allow for assembly
- * optimization in the calling code.
- *
- * Notes:
- *
- * - This routine already includes memory barriers as needed.
- *
- * For example, a user space atomic_add implementation could look like this:
- *
- * #define atomic_add(ptr, val) \
- * ({ register unsigned int *__ptr asm("r2") = (ptr); \
- * register unsigned int __result asm("r1"); \
- * asm volatile ( \
- * "1: @ atomic_add\n\t" \
- * "ldr r0, [r2]\n\t" \
- * "mov r3, #0xffff0fff\n\t" \
- * "add lr, pc, #4\n\t" \
- * "add r1, r0, %2\n\t" \
- * "add pc, r3, #(0xffff0fc0 - 0xffff0fff)\n\t" \
- * "bcc 1b" \
- * : "=&r" (__result) \
- * : "r" (__ptr), "rIL" (val) \
- * : "r0","r3","ip","lr","cc","memory" ); \
- * __result; })
- */
+__kuser_memory_barrier: @ 0xffff0fa0
+ smp_dmb arm
+ usr_ret lr
+
+ .align 5
__kuser_cmpxchg: @ 0xffff0fc0
usr_ret lr
.text
-kuser_cmpxchg_fixup:
+kuser_cmpxchg32_fixup:
@ Called from kuser_cmpxchg_check macro.
- @ r2 = address of interrupted insn (must be preserved).
+ @ r4 = address of interrupted insn (must be preserved).
@ sp = saved regs. r7 and r8 are clobbered.
@ 1b = first critical insn, 2b = last critical insn.
- @ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b.
+ @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b.
mov r7, #0xffff0fff
sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg)))
- subs r8, r2, r7
+ subs r8, r4, r7
rsbcss r8, r8, #(2b - 1b)
strcs r7, [sp, #S_PC]
mov pc, lr
.align 5
-/*
- * Reference prototype:
- *
- * int __kernel_get_tls(void)
- *
- * Input:
- *
- * lr = return address
- *
- * Output:
- *
- * r0 = TLS value
- *
- * Clobbered:
- *
- * none
- *
- * Definition and user space usage example:
- *
- * typedef int (__kernel_get_tls_t)(void);
- * #define __kernel_get_tls (*(__kernel_get_tls_t *)0xffff0fe0)
- *
- * Get the TLS value as previously set via the __ARM_NR_set_tls syscall.
- *
- * This could be used as follows:
- *
- * #define __kernel_get_tls() \
- * ({ register unsigned int __val asm("r0"); \
- * asm( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #31" \
- * : "=r" (__val) : : "lr","cc" ); \
- * __val; })
- */
-
__kuser_get_tls: @ 0xffff0fe0
ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init
usr_ret lr
.word 0 @ 0xffff0ff0 software TLS value, then
.endr @ pad up to __kuser_helper_version
-/*
- * Reference declaration:
- *
- * extern unsigned int __kernel_helper_version;
- *
- * Definition and user space usage example:
- *
- * #define __kernel_helper_version (*(unsigned int *)0xffff0ffc)
- *
- * User space may read this to determine the curent number of helpers
- * available.
- */
-
__kuser_helper_version: @ 0xffff0ffc
.word ((__kuser_helper_end - __kuser_helper_start) >> 5)
.endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
+ ldr lr, [sp, #S_SP] @ top of the stack
+ ldrd r0, r1, [sp, #S_LR] @ calling lr and pc
clrex @ clear the exclusive monitor
- ldr r0, [sp, #S_SP] @ top of the stack
- ldr r1, [sp, #S_PC] @ return address
- tst r0, #4 @ orig stack 8-byte aligned?
- stmdb r0, {r1, \rpsr} @ rfe context
+ stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context
ldmia sp, {r0 - r12}
- ldr lr, [sp, #S_LR]
- addeq sp, sp, #S_FRAME_SIZE - 8 @ aligned
- addne sp, sp, #S_FRAME_SIZE - 4 @ not aligned
+ mov sp, lr
+ ldr lr, [sp], #4
rfeia sp!
.endm
.endm
#endif /* !CONFIG_THUMB2_KERNEL */
- @
- @ Debug exceptions are taken as prefetch or data aborts.
- @ We must disable preemption during the handler so that
- @ we can access the debug registers safely.
- @
- .macro debug_entry, fsr
-#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT)
- ldr r4, =0x40f @ mask out fsr.fs
- and r5, r4, \fsr
- cmp r5, #2 @ debug exception
- bne 1f
- get_thread_info r10
- ldr r6, [r10, #TI_PREEMPT] @ get preempt count
- add r11, r6, #1 @ increment it
- str r11, [r10, #TI_PREEMPT]
-1:
-#endif
- .endm
-
/*
* These are the registers used in the syscall handler, and allow us to
* have in theory up to 7 arguments to a function - r0 to r6.
* numbers for r1.
*
*/
+ .arm
+
__HEAD
ENTRY(stext)
+
+ THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
+ THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
+ THUMB( .thumb ) @ switch to Thumb now.
+ THUMB(1: )
+
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
#ifndef CONFIG_CPU_CP15
* crap here - that's what the boot loader (or in extreme, well justified
* circumstances, zImage) is for.
*/
+ .arm
+
__HEAD
ENTRY(stext)
+
+ THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM.
+ THUMB( bx r9 ) @ If this is a Thumb-2 kernel,
+ THUMB( .thumb ) @ switch to Thumb now.
+ THUMB(1: )
+
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
@ and irqs disabled
mrc p15, 0, r9, c0, c0 @ get processor id
/*
* Called from either the Data Abort Handler [watchpoint] or the
- * Prefetch Abort Handler [breakpoint] with preemption disabled.
+ * Prefetch Abort Handler [breakpoint] with interrupts disabled.
*/
static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
int ret = 0;
u32 dscr;
- /* We must be called with preemption disabled. */
- WARN_ON(preemptible());
+ preempt_disable();
+
+ if (interrupts_enabled(regs))
+ local_irq_enable();
/* We only handle watchpoints and hardware breakpoints. */
ARM_DBG_READ(c1, 0, dscr);
ret = 1; /* Unhandled fault. */
}
- /*
- * Re-enable preemption after it was disabled in the
- * low-level exception handling code.
- */
preempt_enable();
return ret;
#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_data *d)
+static bool migrate_one_irq(struct irq_desc *desc)
{
- unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask);
+ struct irq_data *d = irq_desc_get_irq_data(desc);
+ const struct cpumask *affinity = d->affinity;
+ struct irq_chip *c;
bool ret = false;
- if (cpu >= nr_cpu_ids) {
- cpu = cpumask_any(cpu_online_mask);
+ /*
+ * If this is a per-CPU interrupt, or the affinity does not
+ * include this CPU, then we have nothing to do.
+ */
+ if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
+ return false;
+
+ if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
+ affinity = cpu_online_mask;
ret = true;
}
- pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu);
-
- d->chip->irq_set_affinity(d, cpumask_of(cpu), true);
+ c = irq_data_get_irq_chip(d);
+ if (c->irq_set_affinity)
+ c->irq_set_affinity(d, affinity, true);
+ else
+ pr_debug("IRQ%u: unable to set affinity\n", d->irq);
return ret;
}
/*
- * The CPU has been marked offline. Migrate IRQs off this CPU. If
- * the affinity settings do not allow other CPUs, force them onto any
+ * The current CPU has been marked offline. Migrate IRQs off this CPU.
+ * If the affinity settings do not allow other CPUs, force them onto any
* available CPU.
+ *
+ * Note: we must iterate over all IRQs, whether they have an attached
+ * action structure or not, as we need to get chained interrupts too.
*/
void migrate_irqs(void)
{
- unsigned int i, cpu = smp_processor_id();
+ unsigned int i;
struct irq_desc *desc;
unsigned long flags;
local_irq_save(flags);
for_each_irq_desc(i, desc) {
- struct irq_data *d = &desc->irq_data;
bool affinity_broken = false;
- raw_spin_lock(&desc->lock);
- do {
- if (desc->action == NULL)
- break;
-
- if (d->node != cpu)
- break;
+ if (!desc)
+ continue;
- affinity_broken = migrate_one_irq(d);
- } while (0);
+ raw_spin_lock(&desc->lock);
+ affinity_broken = migrate_one_irq(desc);
raw_spin_unlock(&desc->lock);
if (affinity_broken && printk_ratelimit())
- pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu);
+ pr_warning("IRQ%u no longer affine to CPU%u\n", i,
+ smp_processor_id());
}
local_irq_restore(flags);
--- /dev/null
+/*
+ * arch/arm/kernel/kprobes-decode.c
+ *
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+/*
+ * We do not have hardware single-stepping on ARM, This
+ * effort is further complicated by the ARM not having a
+ * "next PC" register. Instructions that change the PC
+ * can't be safely single-stepped in a MP environment, so
+ * we have a lot of work to do:
+ *
+ * In the prepare phase:
+ * *) If it is an instruction that does anything
+ * with the CPU mode, we reject it for a kprobe.
+ * (This is out of laziness rather than need. The
+ * instructions could be simulated.)
+ *
+ * *) Otherwise, decode the instruction rewriting its
+ * registers to take fixed, ordered registers and
+ * setting a handler for it to run the instruction.
+ *
+ * In the execution phase by an instruction's handler:
+ *
+ * *) If the PC is written to by the instruction, the
+ * instruction must be fully simulated in software.
+ *
+ * *) Otherwise, a modified form of the instruction is
+ * directly executed. Its handler calls the
+ * instruction in insn[0]. In insn[1] is a
+ * "mov pc, lr" to return.
+ *
+ * Before calling, load up the reordered registers
+ * from the original instruction's registers. If one
+ * of the original input registers is the PC, compute
+ * and adjust the appropriate input register.
+ *
+ * After call completes, copy the output registers to
+ * the original instruction's original registers.
+ *
+ * We don't use a real breakpoint instruction since that
+ * would have us in the kernel go from SVC mode to SVC
+ * mode losing the link register. Instead we use an
+ * undefined instruction. To simplify processing, the
+ * undefined instruction used for kprobes must be reserved
+ * exclusively for kprobes use.
+ *
+ * TODO: ifdef out some instruction decoding based on architecture.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+
+#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
+
+#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define BLX(reg) "blx "reg" \n\t"
+#else
+#define BLX(reg) "mov lr, pc \n\t" \
+ "mov pc, "reg" \n\t"
+#endif
+
+/*
+ * To avoid the complications of mimicing single-stepping on a
+ * processor without a Next-PC or a single-step mode, and to
+ * avoid having to deal with the side-effects of boosting, we
+ * simulate or emulate (almost) all ARM instructions.
+ *
+ * "Simulation" is where the instruction's behavior is duplicated in
+ * C code. "Emulation" is where the original instruction is rewritten
+ * and executed, often by altering its registers.
+ *
+ * By having all behavior of the kprobe'd instruction completed before
+ * returning from the kprobe_handler(), all locks (scheduler and
+ * interrupt) can safely be released. There is no need for secondary
+ * breakpoints, no race with MP or preemptable kernels, nor having to
+ * clean up resources counts at a later time impacting overall system
+ * performance. By rewriting the instruction, only the minimum registers
+ * need to be loaded and saved back optimizing performance.
+ *
+ * Calling the insnslot_*_rwflags version of a function doesn't hurt
+ * anything even when the CPSR flags aren't updated by the
+ * instruction. It's just a little slower in return for saving
+ * a little space by not having a duplicate function that doesn't
+ * update the flags. (The same optimization can be said for
+ * instructions that do or don't perform register writeback)
+ * Also, instructions can either read the flags, only write the
+ * flags, or read and write the flags. To save combinations
+ * rather than for sheer performance, flag functions just assume
+ * read and write of flags.
+ */
+
+static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ if (insn & (1 << 24))
+ regs->ARM_lr = iaddr + 4;
+
+ regs->ARM_pc = iaddr + 8 + disp;
+}
+
+static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long iaddr = (long)p->addr;
+ int disp = branch_displacement(insn);
+
+ regs->ARM_lr = iaddr + 4;
+ regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rm = insn & 0xf;
+ long rmv = regs->uregs[rm];
+
+ if (insn & (1 << 5))
+ regs->ARM_lr = (long)p->addr + 4;
+
+ regs->ARM_pc = rmv & ~0x1;
+ regs->ARM_cpsr &= ~PSR_T_BIT;
+ if (rmv & 0x1)
+ regs->ARM_cpsr |= PSR_T_BIT;
+}
+
+static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+ regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
+static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->uregs[12] = regs->uregs[13];
+}
+
+static void __kprobes
+emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = (unsigned long)p->addr + 8;
+ int rt = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rtv asm("r0") = regs->uregs[rt];
+ register unsigned long rt2v asm("r1") = regs->uregs[rt+1];
+ register unsigned long rnv asm("r2") = (rn == 15) ? pc
+ : regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ BLX("%[fn]")
+ : "=r" (rtv), "=r" (rt2v), "=r" (rnv)
+ : "0" (rtv), "1" (rt2v), "2" (rnv), "r" (rmv),
+ [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rt] = rtv;
+ regs->uregs[rt+1] = rt2v;
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv;
+}
+
+static void __kprobes
+emulate_ldr(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = (unsigned long)p->addr + 8;
+ int rt = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rtv asm("r0");
+ register unsigned long rnv asm("r2") = (rn == 15) ? pc
+ : regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ BLX("%[fn]")
+ : "=r" (rtv), "=r" (rnv)
+ : "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ if (rt == 15)
+ load_write_pc(rtv, regs);
+ else
+ regs->uregs[rt] = rtv;
+
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv;
+}
+
+static void __kprobes
+emulate_str(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long rtpc = (unsigned long)p->addr + str_pc_offset;
+ unsigned long rnpc = (unsigned long)p->addr + 8;
+ int rt = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rtv asm("r0") = (rt == 15) ? rtpc
+ : regs->uregs[rt];
+ register unsigned long rnv asm("r2") = (rn == 15) ? rnpc
+ : regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ BLX("%[fn]")
+ : "=r" (rnv)
+ : "r" (rtv), "0" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ if (is_writeback(insn))
+ regs->uregs[rn] = rnv;
+}
+
+static void __kprobes
+emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = (unsigned long)p->addr + 8;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+ int rs = (insn >> 8) & 0xf;
+
+ register unsigned long rdv asm("r0") = regs->uregs[rd];
+ register unsigned long rnv asm("r2") = (rn == 15) ? pc
+ : regs->uregs[rn];
+ register unsigned long rmv asm("r3") = (rm == 15) ? pc
+ : regs->uregs[rm];
+ register unsigned long rsv asm("r1") = regs->uregs[rs];
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ BLX("%[fn]")
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdv), [cpsr] "=r" (cpsr)
+ : "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
+ "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ if (rd == 15)
+ alu_write_pc(rdv, regs);
+ else
+ regs->uregs[rd] = rdv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+static void __kprobes
+emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rdv asm("r0") = regs->uregs[rd];
+ register unsigned long rnv asm("r2") = regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ BLX("%[fn]")
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdv), [cpsr] "=r" (cpsr)
+ : "0" (rdv), "r" (rnv), "r" (rmv),
+ "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+static void __kprobes
+emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 16) & 0xf;
+ int rn = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+ int rs = (insn >> 8) & 0xf;
+
+ register unsigned long rdv asm("r2") = regs->uregs[rd];
+ register unsigned long rnv asm("r0") = regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+ register unsigned long rsv asm("r1") = regs->uregs[rs];
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ BLX("%[fn]")
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdv), [cpsr] "=r" (cpsr)
+ : "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv),
+ "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+static void __kprobes
+emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 12) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rdv asm("r0") = regs->uregs[rd];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ BLX("%[fn]")
+ : "=r" (rdv)
+ : "0" (rdv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes
+emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rdlo = (insn >> 12) & 0xf;
+ int rdhi = (insn >> 16) & 0xf;
+ int rn = insn & 0xf;
+ int rm = (insn >> 8) & 0xf;
+
+ register unsigned long rdlov asm("r0") = regs->uregs[rdlo];
+ register unsigned long rdhiv asm("r2") = regs->uregs[rdhi];
+ register unsigned long rnv asm("r3") = regs->uregs[rn];
+ register unsigned long rmv asm("r1") = regs->uregs[rm];
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ BLX("%[fn]")
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdlov), "=r" (rdhiv), [cpsr] "=r" (cpsr)
+ : "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
+ "2" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rdlo] = rdlov;
+ regs->uregs[rdhi] = rdhiv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+/*
+ * For the instruction masking and comparisons in all the "space_*"
+ * functions below, Do _not_ rearrange the order of tests unless
+ * you're very, very sure of what you are doing. For the sake of
+ * efficiency, the masks for some tests sometimes assume other test
+ * have been done prior to them so the number of patterns to test
+ * for an instruction set can be as broad as possible to reduce the
+ * number of tests needed.
+ */
+
+static const union decode_item arm_1111_table[] = {
+ /* Unconditional instructions */
+
+ /* memory hint 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx */
+ /* PLDI (immediate) 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx */
+ /* PLDW (immediate) 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx */
+ /* PLD (immediate) 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_SIMULATE (0xfe300000, 0xf4100000, kprobe_simulate_nop),
+
+ /* memory hint 1111 0110 x001 xxxx xxxx xxxx xxx0 xxxx */
+ /* PLDI (register) 1111 0110 x101 xxxx xxxx xxxx xxx0 xxxx */
+ /* PLDW (register) 1111 0111 x001 xxxx xxxx xxxx xxx0 xxxx */
+ /* PLD (register) 1111 0111 x101 xxxx xxxx xxxx xxx0 xxxx */
+ DECODE_SIMULATE (0xfe300010, 0xf6100000, kprobe_simulate_nop),
+
+ /* BLX (immediate) 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx */
+ DECODE_SIMULATE (0xfe000000, 0xfa000000, simulate_blx1),
+
+ /* CPS 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
+ /* SETEND 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
+ /* SRS 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* RFE 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+
+ /* Coprocessor instructions... */
+ /* MCRR2 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx */
+ /* MRRC2 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx */
+ /* LDC2 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC2 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP2 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR2 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC2 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_0xx0____0xxx_table[] = {
+ /* Miscellaneous instructions */
+
+ /* MRS cpsr cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
+ DECODE_SIMULATEX(0x0ff000f0, 0x01000000, simulate_mrs,
+ REGS(0, NOPC, 0, 0, 0)),
+
+ /* BX cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
+ DECODE_SIMULATE (0x0ff000f0, 0x01200010, simulate_blx2bx),
+
+ /* BLX (register) cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
+ DECODE_SIMULATEX(0x0ff000f0, 0x01200030, simulate_blx2bx,
+ REGS(0, 0, 0, 0, NOPC)),
+
+ /* CLZ cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
+ DECODE_EMULATEX (0x0ff000f0, 0x01600010, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPC)),
+
+ /* QADD cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx */
+ /* QSUB cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx */
+ /* QDADD cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx */
+ /* QDSUB cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx */
+ DECODE_EMULATEX (0x0f9000f0, 0x01000050, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+ /* BXJ cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
+ /* MSR cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
+ /* MRS spsr cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
+ /* BKPT 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* SMC cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
+ /* And unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_0xx0____1xx0_table[] = {
+ /* Halfword multiply and multiply-accumulate */
+
+ /* SMLALxy cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
+ DECODE_EMULATEX (0x0ff00090, 0x01400080, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ /* SMULWy cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
+ DECODE_OR (0x0ff000b0, 0x012000a0),
+ /* SMULxy cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
+ DECODE_EMULATEX (0x0ff00090, 0x01600080, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+ /* SMLAxy cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx */
+ DECODE_OR (0x0ff00090, 0x01000080),
+ /* SMLAWy cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx */
+ DECODE_EMULATEX (0x0ff000b0, 0x01200080, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0000_____1001_table[] = {
+ /* Multiply and multiply-accumulate */
+
+ /* MUL cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx */
+ /* MULS cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_EMULATEX (0x0fe000f0, 0x00000090, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+ /* MLA cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx */
+ /* MLAS cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_OR (0x0fe000f0, 0x00200090),
+ /* MLS cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_EMULATEX (0x0ff000f0, 0x00600090, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ /* UMAAL cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_OR (0x0ff000f0, 0x00400090),
+ /* UMULL cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx */
+ /* UMULLS cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx */
+ /* UMLAL cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx */
+ /* UMLALS cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx */
+ /* SMULL cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx */
+ /* SMULLS cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx */
+ /* SMLAL cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx */
+ /* SMLALS cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_EMULATEX (0x0f8000f0, 0x00800090, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0001_____1001_table[] = {
+ /* Synchronization primitives */
+
+ /* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */
+ DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+ /* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */
+ /* And unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_000x_____1xx1_table[] = {
+ /* Extra load/store instructions */
+
+ /* STRHT cccc 0000 xx10 xxxx xxxx xxxx 1011 xxxx */
+ /* ??? cccc 0000 xx10 xxxx xxxx xxxx 11x1 xxxx */
+ /* LDRHT cccc 0000 xx11 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSBT cccc 0000 xx11 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSHT cccc 0000 xx11 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_REJECT (0x0f200090, 0x00200090),
+
+ /* LDRD/STRD lr,pc,{... cccc 000x x0x0 xxxx 111x xxxx 1101 xxxx */
+ DECODE_REJECT (0x0e10e0d0, 0x0000e0d0),
+
+ /* LDRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_EMULATEX (0x0e5000d0, 0x000000d0, emulate_ldrdstrd,
+ REGS(NOPCWB, NOPCX, 0, 0, NOPC)),
+
+ /* LDRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx */
+ /* STRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_EMULATEX (0x0e5000d0, 0x004000d0, emulate_ldrdstrd,
+ REGS(NOPCWB, NOPCX, 0, 0, 0)),
+
+ /* STRH (register) cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx */
+ DECODE_EMULATEX (0x0e5000f0, 0x000000b0, emulate_str,
+ REGS(NOPCWB, NOPC, 0, 0, NOPC)),
+
+ /* LDRH (register) cccc 000x x0x1 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSB (register) cccc 000x x0x1 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSH (register) cccc 000x x0x1 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_EMULATEX (0x0e500090, 0x00100090, emulate_ldr,
+ REGS(NOPCWB, NOPC, 0, 0, NOPC)),
+
+ /* STRH (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1011 xxxx */
+ DECODE_EMULATEX (0x0e5000f0, 0x004000b0, emulate_str,
+ REGS(NOPCWB, NOPC, 0, 0, 0)),
+
+ /* LDRH (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1011 xxxx */
+ /* LDRSB (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1101 xxxx */
+ /* LDRSH (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_EMULATEX (0x0e500090, 0x00500090, emulate_ldr,
+ REGS(NOPCWB, NOPC, 0, 0, 0)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_000x_table[] = {
+ /* Data-processing (register) */
+
+ /* <op>S PC, ... cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */
+ DECODE_REJECT (0x0e10f000, 0x0010f000),
+
+ /* MOV IP, SP 1110 0001 1010 0000 1100 0000 0000 1101 */
+ DECODE_SIMULATE (0xffffffff, 0xe1a0c00d, simulate_mov_ipsp),
+
+ /* TST (register) cccc 0001 0001 xxxx xxxx xxxx xxx0 xxxx */
+ /* TEQ (register) cccc 0001 0011 xxxx xxxx xxxx xxx0 xxxx */
+ /* CMP (register) cccc 0001 0101 xxxx xxxx xxxx xxx0 xxxx */
+ /* CMN (register) cccc 0001 0111 xxxx xxxx xxxx xxx0 xxxx */
+ DECODE_EMULATEX (0x0f900010, 0x01100000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, 0, 0, 0, ANY)),
+
+ /* MOV (register) cccc 0001 101x xxxx xxxx xxxx xxx0 xxxx */
+ /* MVN (register) cccc 0001 111x xxxx xxxx xxxx xxx0 xxxx */
+ DECODE_EMULATEX (0x0fa00010, 0x01a00000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(0, ANY, 0, 0, ANY)),
+
+ /* AND (register) cccc 0000 000x xxxx xxxx xxxx xxx0 xxxx */
+ /* EOR (register) cccc 0000 001x xxxx xxxx xxxx xxx0 xxxx */
+ /* SUB (register) cccc 0000 010x xxxx xxxx xxxx xxx0 xxxx */
+ /* RSB (register) cccc 0000 011x xxxx xxxx xxxx xxx0 xxxx */
+ /* ADD (register) cccc 0000 100x xxxx xxxx xxxx xxx0 xxxx */
+ /* ADC (register) cccc 0000 101x xxxx xxxx xxxx xxx0 xxxx */
+ /* SBC (register) cccc 0000 110x xxxx xxxx xxxx xxx0 xxxx */
+ /* RSC (register) cccc 0000 111x xxxx xxxx xxxx xxx0 xxxx */
+ /* ORR (register) cccc 0001 100x xxxx xxxx xxxx xxx0 xxxx */
+ /* BIC (register) cccc 0001 110x xxxx xxxx xxxx xxx0 xxxx */
+ DECODE_EMULATEX (0x0e000010, 0x00000000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, ANY, 0, 0, ANY)),
+
+ /* TST (reg-shift reg) cccc 0001 0001 xxxx xxxx xxxx 0xx1 xxxx */
+ /* TEQ (reg-shift reg) cccc 0001 0011 xxxx xxxx xxxx 0xx1 xxxx */
+ /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */
+ /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */
+ DECODE_EMULATEX (0x0f900090, 0x01100010, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, 0, NOPC, 0, ANY)),
+
+ /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */
+ /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */
+ DECODE_EMULATEX (0x0fa00090, 0x01a00010, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(0, ANY, NOPC, 0, ANY)),
+
+ /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */
+ /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */
+ /* SUB (reg-shift reg) cccc 0000 010x xxxx xxxx xxxx 0xx1 xxxx */
+ /* RSB (reg-shift reg) cccc 0000 011x xxxx xxxx xxxx 0xx1 xxxx */
+ /* ADD (reg-shift reg) cccc 0000 100x xxxx xxxx xxxx 0xx1 xxxx */
+ /* ADC (reg-shift reg) cccc 0000 101x xxxx xxxx xxxx 0xx1 xxxx */
+ /* SBC (reg-shift reg) cccc 0000 110x xxxx xxxx xxxx 0xx1 xxxx */
+ /* RSC (reg-shift reg) cccc 0000 111x xxxx xxxx xxxx 0xx1 xxxx */
+ /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */
+ /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */
+ DECODE_EMULATEX (0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, ANY, NOPC, 0, ANY)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_001x_table[] = {
+ /* Data-processing (immediate) */
+
+ /* MOVW cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
+ /* MOVT cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0fb00000, 0x03000000, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, 0)),
+
+ /* YIELD cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
+ DECODE_OR (0x0fff00ff, 0x03200001),
+ /* SEV cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
+ DECODE_EMULATE (0x0fff00ff, 0x03200004, kprobe_emulate_none),
+ /* NOP cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
+ /* WFE cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
+ /* WFI cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
+ DECODE_SIMULATE (0x0fff00fc, 0x03200000, kprobe_simulate_nop),
+ /* DBG cccc 0011 0010 0000 xxxx xxxx ffff xxxx */
+ /* unallocated hints cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
+ /* MSR (immediate) cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0x0fb00000, 0x03200000),
+
+ /* <op>S PC, ... cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */
+ DECODE_REJECT (0x0e10f000, 0x0210f000),
+
+ /* TST (immediate) cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx */
+ /* TEQ (immediate) cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx */
+ /* CMP (immediate) cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx */
+ /* CMN (immediate) cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0f900000, 0x03100000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, 0, 0, 0, 0)),
+
+ /* MOV (immediate) cccc 0011 101x xxxx xxxx xxxx xxxx xxxx */
+ /* MVN (immediate) cccc 0011 111x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0fa00000, 0x03a00000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(0, ANY, 0, 0, 0)),
+
+ /* AND (immediate) cccc 0010 000x xxxx xxxx xxxx xxxx xxxx */
+ /* EOR (immediate) cccc 0010 001x xxxx xxxx xxxx xxxx xxxx */
+ /* SUB (immediate) cccc 0010 010x xxxx xxxx xxxx xxxx xxxx */
+ /* RSB (immediate) cccc 0010 011x xxxx xxxx xxxx xxxx xxxx */
+ /* ADD (immediate) cccc 0010 100x xxxx xxxx xxxx xxxx xxxx */
+ /* ADC (immediate) cccc 0010 101x xxxx xxxx xxxx xxxx xxxx */
+ /* SBC (immediate) cccc 0010 110x xxxx xxxx xxxx xxxx xxxx */
+ /* RSC (immediate) cccc 0010 111x xxxx xxxx xxxx xxxx xxxx */
+ /* ORR (immediate) cccc 0011 100x xxxx xxxx xxxx xxxx xxxx */
+ /* BIC (immediate) cccc 0011 110x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0e000000, 0x02000000, emulate_rd12rn16rm0rs8_rwflags,
+ REGS(ANY, ANY, 0, 0, 0)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0110_____xxx1_table[] = {
+ /* Media instructions */
+
+ /* SEL cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx */
+ DECODE_EMULATEX (0x0ff000f0, 0x068000b0, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+ /* SSAT cccc 0110 101x xxxx xxxx xxxx xx01 xxxx */
+ /* USAT cccc 0110 111x xxxx xxxx xxxx xx01 xxxx */
+ DECODE_OR(0x0fa00030, 0x06a00010),
+ /* SSAT16 cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx */
+ /* USAT16 cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx */
+ DECODE_EMULATEX (0x0fb000f0, 0x06a00030, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPC)),
+
+ /* REV cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
+ /* REV16 cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
+ /* RBIT cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
+ /* REVSH cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
+ DECODE_EMULATEX (0x0fb00070, 0x06b00030, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPC)),
+
+ /* ??? cccc 0110 0x00 xxxx xxxx xxxx xxx1 xxxx */
+ DECODE_REJECT (0x0fb00010, 0x06000010),
+ /* ??? cccc 0110 0xxx xxxx xxxx xxxx 1011 xxxx */
+ DECODE_REJECT (0x0f8000f0, 0x060000b0),
+ /* ??? cccc 0110 0xxx xxxx xxxx xxxx 1101 xxxx */
+ DECODE_REJECT (0x0f8000f0, 0x060000d0),
+ /* SADD16 cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx */
+ /* SADDSUBX cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx */
+ /* SSUBADDX cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx */
+ /* SSUB16 cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx */
+ /* SADD8 cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx */
+ /* SSUB8 cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx */
+ /* QADD16 cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx */
+ /* QADDSUBX cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx */
+ /* QSUBADDX cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx */
+ /* QSUB16 cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx */
+ /* QADD8 cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx */
+ /* QSUB8 cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx */
+ /* SHADD16 cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx */
+ /* SHADDSUBX cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx */
+ /* SHSUBADDX cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx */
+ /* SHSUB16 cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx */
+ /* SHADD8 cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx */
+ /* SHSUB8 cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx */
+ /* UADD16 cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx */
+ /* UADDSUBX cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx */
+ /* USUBADDX cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx */
+ /* USUB16 cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx */
+ /* UADD8 cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx */
+ /* USUB8 cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx */
+ /* UQADD16 cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx */
+ /* UQADDSUBX cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx */
+ /* UQSUBADDX cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx */
+ /* UQSUB16 cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx */
+ /* UQADD8 cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx */
+ /* UQSUB8 cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx */
+ /* UHADD16 cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx */
+ /* UHADDSUBX cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx */
+ /* UHSUBADDX cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx */
+ /* UHSUB16 cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx */
+ /* UHADD8 cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx */
+ /* UHSUB8 cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_EMULATEX (0x0f800010, 0x06000010, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+ /* PKHBT cccc 0110 1000 xxxx xxxx xxxx x001 xxxx */
+ /* PKHTB cccc 0110 1000 xxxx xxxx xxxx x101 xxxx */
+ DECODE_EMULATEX (0x0ff00030, 0x06800010, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPC, NOPC, 0, 0, NOPC)),
+
+ /* ??? cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx */
+ /* ??? cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx */
+ DECODE_REJECT (0x0fb000f0, 0x06900070),
+
+ /* SXTB16 cccc 0110 1000 1111 xxxx xxxx 0111 xxxx */
+ /* SXTB cccc 0110 1010 1111 xxxx xxxx 0111 xxxx */
+ /* SXTH cccc 0110 1011 1111 xxxx xxxx 0111 xxxx */
+ /* UXTB16 cccc 0110 1100 1111 xxxx xxxx 0111 xxxx */
+ /* UXTB cccc 0110 1110 1111 xxxx xxxx 0111 xxxx */
+ /* UXTH cccc 0110 1111 1111 xxxx xxxx 0111 xxxx */
+ DECODE_EMULATEX (0x0f8f00f0, 0x068f0070, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPC)),
+
+ /* SXTAB16 cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx */
+ /* SXTAB cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx */
+ /* SXTAH cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx */
+ /* UXTAB16 cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx */
+ /* UXTAB cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx */
+ /* UXTAH cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx */
+ DECODE_EMULATEX (0x0f8000f0, 0x06800070, emulate_rd12rn16rm0_rwflags_nopc,
+ REGS(NOPCX, NOPC, 0, 0, NOPC)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_0111_____xxx1_table[] = {
+ /* Media instructions */
+
+ /* UNDEFINED cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
+ DECODE_REJECT (0x0ff000f0, 0x07f000f0),
+
+ /* SMLALD cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
+ /* SMLSLD cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
+ DECODE_EMULATEX (0x0ff00090, 0x07400010, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ /* SMUAD cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx */
+ /* SMUSD cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx */
+ DECODE_OR (0x0ff0f090, 0x0700f010),
+ /* SMMUL cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx */
+ DECODE_OR (0x0ff0f0d0, 0x0750f010),
+ /* USAD8 cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */
+ DECODE_EMULATEX (0x0ff0f0f0, 0x0780f010, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, 0, NOPC, 0, NOPC)),
+
+ /* SMLAD cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx */
+ /* SMLSD cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx */
+ DECODE_OR (0x0ff00090, 0x07000010),
+ /* SMMLA cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx */
+ DECODE_OR (0x0ff000d0, 0x07500010),
+ /* USADA8 cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */
+ DECODE_EMULATEX (0x0ff000f0, 0x07800010, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, NOPCX, NOPC, 0, NOPC)),
+
+ /* SMMLS cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx */
+ DECODE_EMULATEX (0x0ff000d0, 0x075000d0, emulate_rd16rn12rm0rs8_rwflags_nopc,
+ REGS(NOPC, NOPC, NOPC, 0, NOPC)),
+
+ /* SBFX cccc 0111 101x xxxx xxxx xxxx x101 xxxx */
+ /* UBFX cccc 0111 111x xxxx xxxx xxxx x101 xxxx */
+ DECODE_EMULATEX (0x0fa00070, 0x07a00050, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPC)),
+
+ /* BFC cccc 0111 110x xxxx xxxx xxxx x001 1111 */
+ DECODE_EMULATEX (0x0fe0007f, 0x07c0001f, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, 0)),
+
+ /* BFI cccc 0111 110x xxxx xxxx xxxx x001 xxxx */
+ DECODE_EMULATEX (0x0fe00070, 0x07c00010, emulate_rd12rm0_noflags_nopc,
+ REGS(0, NOPC, 0, 0, NOPCX)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_01xx_table[] = {
+ /* Load/store word and unsigned byte */
+
+ /* LDRB/STRB pc,[...] cccc 01xx x0xx xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0x0c40f000, 0x0440f000),
+
+ /* STRT cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRT cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
+ /* STRBT cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRBT cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0x0d200000, 0x04200000),
+
+ /* STR (immediate) cccc 010x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRB (immediate) cccc 010x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0e100000, 0x04000000, emulate_str,
+ REGS(NOPCWB, ANY, 0, 0, 0)),
+
+ /* LDR (immediate) cccc 010x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB (immediate) cccc 010x x1x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0e100000, 0x04100000, emulate_ldr,
+ REGS(NOPCWB, ANY, 0, 0, 0)),
+
+ /* STR (register) cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ /* STRB (register) cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0e100000, 0x06000000, emulate_str,
+ REGS(NOPCWB, ANY, 0, 0, NOPC)),
+
+ /* LDR (register) cccc 011x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB (register) cccc 011x x1x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0x0e100000, 0x06100000, emulate_ldr,
+ REGS(NOPCWB, ANY, 0, 0, NOPC)),
+
+ DECODE_END
+};
+
+static const union decode_item arm_cccc_100x_table[] = {
+ /* Block data transfer instructions */
+
+ /* LDM cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
+ /* STM cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_CUSTOM (0x0e400000, 0x08000000, kprobe_decode_ldmstm),
+
+ /* STM (user registers) cccc 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* LDM (user registers) cccc 100x x1x1 xxxx 0xxx xxxx xxxx xxxx */
+ /* LDM (exception ret) cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
+ DECODE_END
+};
+
+const union decode_item kprobe_decode_arm_table[] = {
+ /*
+ * Unconditional instructions
+ * 1111 xxxx xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xf0000000, 0xf0000000, arm_1111_table),
+
+ /*
+ * Miscellaneous instructions
+ * cccc 0001 0xx0 xxxx xxxx xxxx 0xxx xxxx
+ */
+ DECODE_TABLE (0x0f900080, 0x01000000, arm_cccc_0001_0xx0____0xxx_table),
+
+ /*
+ * Halfword multiply and multiply-accumulate
+ * cccc 0001 0xx0 xxxx xxxx xxxx 1xx0 xxxx
+ */
+ DECODE_TABLE (0x0f900090, 0x01000080, arm_cccc_0001_0xx0____1xx0_table),
+
+ /*
+ * Multiply and multiply-accumulate
+ * cccc 0000 xxxx xxxx xxxx xxxx 1001 xxxx
+ */
+ DECODE_TABLE (0x0f0000f0, 0x00000090, arm_cccc_0000_____1001_table),
+
+ /*
+ * Synchronization primitives
+ * cccc 0001 xxxx xxxx xxxx xxxx 1001 xxxx
+ */
+ DECODE_TABLE (0x0f0000f0, 0x01000090, arm_cccc_0001_____1001_table),
+
+ /*
+ * Extra load/store instructions
+ * cccc 000x xxxx xxxx xxxx xxxx 1xx1 xxxx
+ */
+ DECODE_TABLE (0x0e000090, 0x00000090, arm_cccc_000x_____1xx1_table),
+
+ /*
+ * Data-processing (register)
+ * cccc 000x xxxx xxxx xxxx xxxx xxx0 xxxx
+ * Data-processing (register-shifted register)
+ * cccc 000x xxxx xxxx xxxx xxxx 0xx1 xxxx
+ */
+ DECODE_TABLE (0x0e000000, 0x00000000, arm_cccc_000x_table),
+
+ /*
+ * Data-processing (immediate)
+ * cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0x0e000000, 0x02000000, arm_cccc_001x_table),
+
+ /*
+ * Media instructions
+ * cccc 011x xxxx xxxx xxxx xxxx xxx1 xxxx
+ */
+ DECODE_TABLE (0x0f000010, 0x06000010, arm_cccc_0110_____xxx1_table),
+ DECODE_TABLE (0x0f000010, 0x07000010, arm_cccc_0111_____xxx1_table),
+
+ /*
+ * Load/store word and unsigned byte
+ * cccc 01xx xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0x0c000000, 0x04000000, arm_cccc_01xx_table),
+
+ /*
+ * Block data transfer instructions
+ * cccc 100x xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0x0e000000, 0x08000000, arm_cccc_100x_table),
+
+ /* B cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
+ /* BL cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
+ DECODE_SIMULATE (0x0e000000, 0x0a000000, simulate_bbl),
+
+ /*
+ * Supervisor Call, and coprocessor instructions
+ */
+
+ /* MCRR cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx */
+ /* MRRC cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx */
+ /* LDC cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
+ /* STC cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
+ /* CDP cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
+ /* MCR cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
+ /* MRC cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
+ /* SVC cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0x0c000000, 0x0c000000),
+
+ DECODE_END
+};
+
+static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_pc += 4;
+ p->ainsn.insn_handler(p, regs);
+}
+
+/* Return:
+ * INSN_REJECTED If instruction is one not allowed to kprobe,
+ * INSN_GOOD If instruction is supported and uses instruction slot,
+ * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
+ *
+ * For instructions we don't want to kprobe (INSN_REJECTED return result):
+ * These are generally ones that modify the processor state making
+ * them "hard" to simulate such as switches processor modes or
+ * make accesses in alternate modes. Any of these could be simulated
+ * if the work was put into it, but low return considering they
+ * should also be very rare.
+ */
+enum kprobe_insn __kprobes
+arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn_singlestep = arm_singlestep;
+ asi->insn_check_cc = kprobe_condition_checks[insn>>28];
+ return kprobe_decode_insn(insn, asi, kprobe_decode_arm_table, false);
+}
--- /dev/null
+/*
+ * arch/arm/kernel/kprobes-common.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+
+
+#ifndef find_str_pc_offset
+
+/*
+ * For STR and STM instructions, an ARM core may choose to use either
+ * a +8 or a +12 displacement from the current instruction's address.
+ * Whichever value is chosen for a given core, it must be the same for
+ * both instructions and may not change. This function measures it.
+ */
+
+int str_pc_offset;
+
+void __init find_str_pc_offset(void)
+{
+ int addr, scratch, ret;
+
+ __asm__ (
+ "sub %[ret], pc, #4 \n\t"
+ "str pc, %[addr] \n\t"
+ "ldr %[scr], %[addr] \n\t"
+ "sub %[ret], %[scr], %[ret] \n\t"
+ : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
+
+ str_pc_offset = ret;
+}
+
+#endif /* !find_str_pc_offset */
+
+
+#ifndef test_load_write_pc_interworking
+
+bool load_write_pc_interworks;
+
+void __init test_load_write_pc_interworking(void)
+{
+ int arch = cpu_architecture();
+ BUG_ON(arch == CPU_ARCH_UNKNOWN);
+ load_write_pc_interworks = arch >= CPU_ARCH_ARMv5T;
+}
+
+#endif /* !test_load_write_pc_interworking */
+
+
+#ifndef test_alu_write_pc_interworking
+
+bool alu_write_pc_interworks;
+
+void __init test_alu_write_pc_interworking(void)
+{
+ int arch = cpu_architecture();
+ BUG_ON(arch == CPU_ARCH_UNKNOWN);
+ alu_write_pc_interworks = arch >= CPU_ARCH_ARMv7;
+}
+
+#endif /* !test_alu_write_pc_interworking */
+
+
+void __init arm_kprobe_decode_init(void)
+{
+ find_str_pc_offset();
+ test_load_write_pc_interworking();
+ test_alu_write_pc_interworking();
+}
+
+
+static unsigned long __kprobes __check_eq(unsigned long cpsr)
+{
+ return cpsr & PSR_Z_BIT;
+}
+
+static unsigned long __kprobes __check_ne(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_Z_BIT;
+}
+
+static unsigned long __kprobes __check_cs(unsigned long cpsr)
+{
+ return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_cc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_mi(unsigned long cpsr)
+{
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_pl(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_vs(unsigned long cpsr)
+{
+ return cpsr & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_vc(unsigned long cpsr)
+{
+ return (~cpsr) & PSR_V_BIT;
+}
+
+static unsigned long __kprobes __check_hi(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ls(unsigned long cpsr)
+{
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+}
+
+static unsigned long __kprobes __check_ge(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_lt(unsigned long cpsr)
+{
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_gt(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_le(unsigned long cpsr)
+{
+ unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+}
+
+static unsigned long __kprobes __check_al(unsigned long cpsr)
+{
+ return true;
+}
+
+kprobe_check_cc * const kprobe_condition_checks[16] = {
+ &__check_eq, &__check_ne, &__check_cs, &__check_cc,
+ &__check_mi, &__check_pl, &__check_vs, &__check_vc,
+ &__check_hi, &__check_ls, &__check_ge, &__check_lt,
+ &__check_gt, &__check_le, &__check_al, &__check_al
+};
+
+
+void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs)
+{
+}
+
+void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs)
+{
+ p->ainsn.insn_fn();
+}
+
+static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rn = (insn >> 16) & 0xf;
+ int lbit = insn & (1 << 20);
+ int wbit = insn & (1 << 21);
+ int ubit = insn & (1 << 23);
+ int pbit = insn & (1 << 24);
+ long *addr = (long *)regs->uregs[rn];
+ int reg_bit_vector;
+ int reg_count;
+
+ reg_count = 0;
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ reg_bit_vector &= (reg_bit_vector - 1);
+ ++reg_count;
+ }
+
+ if (!ubit)
+ addr -= reg_count;
+ addr += (!pbit == !ubit);
+
+ reg_bit_vector = insn & 0xffff;
+ while (reg_bit_vector) {
+ int reg = __ffs(reg_bit_vector);
+ reg_bit_vector &= (reg_bit_vector - 1);
+ if (lbit)
+ regs->uregs[reg] = *addr++;
+ else
+ *addr++ = regs->uregs[reg];
+ }
+
+ if (wbit) {
+ if (!ubit)
+ addr -= reg_count;
+ addr -= (!pbit == !ubit);
+ regs->uregs[rn] = (long)addr;
+ }
+}
+
+static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_pc = (long)p->addr + str_pc_offset;
+ simulate_ldm1stm1(p, regs);
+ regs->ARM_pc = (long)p->addr + 4;
+}
+
+static void __kprobes simulate_ldm1_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ simulate_ldm1stm1(p, regs);
+ load_write_pc(regs->ARM_pc, regs);
+}
+
+static void __kprobes
+emulate_generic_r0_12_noflags(struct kprobe *p, struct pt_regs *regs)
+{
+ register void *rregs asm("r1") = regs;
+ register void *rfn asm("lr") = p->ainsn.insn_fn;
+
+ __asm__ __volatile__ (
+ "stmdb sp!, {%[regs], r11} \n\t"
+ "ldmia %[regs], {r0-r12} \n\t"
+#if __LINUX_ARM_ARCH__ >= 6
+ "blx %[fn] \n\t"
+#else
+ "str %[fn], [sp, #-4]! \n\t"
+ "adr lr, 1f \n\t"
+ "ldr pc, [sp], #4 \n\t"
+ "1: \n\t"
+#endif
+ "ldr lr, [sp], #4 \n\t" /* lr = regs */
+ "stmia lr, {r0-r12} \n\t"
+ "ldr r11, [sp], #4 \n\t"
+ : [regs] "=r" (rregs), [fn] "=r" (rfn)
+ : "0" (rregs), "1" (rfn)
+ : "r0", "r2", "r3", "r4", "r5", "r6", "r7",
+ "r8", "r9", "r10", "r12", "memory", "cc"
+ );
+}
+
+static void __kprobes
+emulate_generic_r2_14_noflags(struct kprobe *p, struct pt_regs *regs)
+{
+ emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+2));
+}
+
+static void __kprobes
+emulate_ldm_r3_15(struct kprobe *p, struct pt_regs *regs)
+{
+ emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+3));
+ load_write_pc(regs->ARM_pc, regs);
+}
+
+enum kprobe_insn __kprobes
+kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ kprobe_insn_handler_t *handler = 0;
+ unsigned reglist = insn & 0xffff;
+ int is_ldm = insn & 0x100000;
+ int rn = (insn >> 16) & 0xf;
+
+ if (rn <= 12 && (reglist & 0xe000) == 0) {
+ /* Instruction only uses registers in the range R0..R12 */
+ handler = emulate_generic_r0_12_noflags;
+
+ } else if (rn >= 2 && (reglist & 0x8003) == 0) {
+ /* Instruction only uses registers in the range R2..R14 */
+ rn -= 2;
+ reglist >>= 2;
+ handler = emulate_generic_r2_14_noflags;
+
+ } else if (rn >= 3 && (reglist & 0x0007) == 0) {
+ /* Instruction only uses registers in the range R3..R15 */
+ if (is_ldm && (reglist & 0x8000)) {
+ rn -= 3;
+ reglist >>= 3;
+ handler = emulate_ldm_r3_15;
+ }
+ }
+
+ if (handler) {
+ /* We can emulate the instruction in (possibly) modified form */
+ asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist;
+ asi->insn_handler = handler;
+ return INSN_GOOD;
+ }
+
+ /* Fallback to slower simulation... */
+ if (reglist & 0x8000)
+ handler = is_ldm ? simulate_ldm1_pc : simulate_stm1_pc;
+ else
+ handler = simulate_ldm1stm1;
+ asi->insn_handler = handler;
+ return INSN_GOOD_NO_SLOT;
+}
+
+
+/*
+ * Prepare an instruction slot to receive an instruction for emulating.
+ * This is done by placing a subroutine return after the location where the
+ * instruction will be placed. We also modify ARM instructions to be
+ * unconditional as the condition code will already be checked before any
+ * emulation handler is called.
+ */
+static kprobe_opcode_t __kprobes
+prepare_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
+ bool thumb)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if (thumb) {
+ u16 *thumb_insn = (u16 *)asi->insn;
+ thumb_insn[1] = 0x4770; /* Thumb bx lr */
+ thumb_insn[2] = 0x4770; /* Thumb bx lr */
+ return insn;
+ }
+ asi->insn[1] = 0xe12fff1e; /* ARM bx lr */
+#else
+ asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */
+#endif
+ /* Make an ARM instruction unconditional */
+ if (insn < 0xe0000000)
+ insn = (insn | 0xe0000000) & ~0x10000000;
+ return insn;
+}
+
+/*
+ * Write a (probably modified) instruction into the slot previously prepared by
+ * prepare_emulated_insn
+ */
+static void __kprobes
+set_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
+ bool thumb)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if (thumb) {
+ u16 *ip = (u16 *)asi->insn;
+ if (is_wide_instruction(insn))
+ *ip++ = insn >> 16;
+ *ip++ = insn;
+ return;
+ }
+#endif
+ asi->insn[0] = insn;
+}
+
+/*
+ * When we modify the register numbers encoded in an instruction to be emulated,
+ * the new values come from this define. For ARM and 32-bit Thumb instructions
+ * this gives...
+ *
+ * bit position 16 12 8 4 0
+ * ---------------+---+---+---+---+---+
+ * register r2 r0 r1 -- r3
+ */
+#define INSN_NEW_BITS 0x00020103
+
+/* Each nibble has same value as that at INSN_NEW_BITS bit 16 */
+#define INSN_SAMEAS16_BITS 0x22222222
+
+/*
+ * Validate and modify each of the registers encoded in an instruction.
+ *
+ * Each nibble in regs contains a value from enum decode_reg_type. For each
+ * non-zero value, the corresponding nibble in pinsn is validated and modified
+ * according to the type.
+ */
+static bool __kprobes decode_regs(kprobe_opcode_t* pinsn, u32 regs)
+{
+ kprobe_opcode_t insn = *pinsn;
+ kprobe_opcode_t mask = 0xf; /* Start at least significant nibble */
+
+ for (; regs != 0; regs >>= 4, mask <<= 4) {
+
+ kprobe_opcode_t new_bits = INSN_NEW_BITS;
+
+ switch (regs & 0xf) {
+
+ case REG_TYPE_NONE:
+ /* Nibble not a register, skip to next */
+ continue;
+
+ case REG_TYPE_ANY:
+ /* Any register is allowed */
+ break;
+
+ case REG_TYPE_SAMEAS16:
+ /* Replace register with same as at bit position 16 */
+ new_bits = INSN_SAMEAS16_BITS;
+ break;
+
+ case REG_TYPE_SP:
+ /* Only allow SP (R13) */
+ if ((insn ^ 0xdddddddd) & mask)
+ goto reject;
+ break;
+
+ case REG_TYPE_PC:
+ /* Only allow PC (R15) */
+ if ((insn ^ 0xffffffff) & mask)
+ goto reject;
+ break;
+
+ case REG_TYPE_NOSP:
+ /* Reject SP (R13) */
+ if (((insn ^ 0xdddddddd) & mask) == 0)
+ goto reject;
+ break;
+
+ case REG_TYPE_NOSPPC:
+ case REG_TYPE_NOSPPCX:
+ /* Reject SP and PC (R13 and R15) */
+ if (((insn ^ 0xdddddddd) & 0xdddddddd & mask) == 0)
+ goto reject;
+ break;
+
+ case REG_TYPE_NOPCWB:
+ if (!is_writeback(insn))
+ break; /* No writeback, so any register is OK */
+ /* fall through... */
+ case REG_TYPE_NOPC:
+ case REG_TYPE_NOPCX:
+ /* Reject PC (R15) */
+ if (((insn ^ 0xffffffff) & mask) == 0)
+ goto reject;
+ break;
+ }
+
+ /* Replace value of nibble with new register number... */
+ insn &= ~mask;
+ insn |= new_bits & mask;
+ }
+
+ *pinsn = insn;
+ return true;
+
+reject:
+ return false;
+}
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+ [DECODE_TYPE_TABLE] = sizeof(struct decode_table),
+ [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom),
+ [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate),
+ [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate),
+ [DECODE_TYPE_OR] = sizeof(struct decode_or),
+ [DECODE_TYPE_REJECT] = sizeof(struct decode_reject)
+};
+
+/*
+ * kprobe_decode_insn operates on data tables in order to decode an ARM
+ * architecture instruction onto which a kprobe has been placed.
+ *
+ * These instruction decoding tables are a concatenation of entries each
+ * of which consist of one of the following structs:
+ *
+ * decode_table
+ * decode_custom
+ * decode_simulate
+ * decode_emulate
+ * decode_or
+ * decode_reject
+ *
+ * Each of these starts with a struct decode_header which has the following
+ * fields:
+ *
+ * type_regs
+ * mask
+ * value
+ *
+ * The least significant DECODE_TYPE_BITS of type_regs contains a value
+ * from enum decode_type, this indicates which of the decode_* structs
+ * the entry contains. The value DECODE_TYPE_END indicates the end of the
+ * table.
+ *
+ * When the table is parsed, each entry is checked in turn to see if it
+ * matches the instruction to be decoded using the test:
+ *
+ * (insn & mask) == value
+ *
+ * If no match is found before the end of the table is reached then decoding
+ * fails with INSN_REJECTED.
+ *
+ * When a match is found, decode_regs() is called to validate and modify each
+ * of the registers encoded in the instruction; the data it uses to do this
+ * is (type_regs >> DECODE_TYPE_BITS). A validation failure will cause decoding
+ * to fail with INSN_REJECTED.
+ *
+ * Once the instruction has passed the above tests, further processing
+ * depends on the type of the table entry's decode struct.
+ *
+ */
+int __kprobes
+kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
+ const union decode_item *table, bool thumb)
+{
+ const struct decode_header *h = (struct decode_header *)table;
+ const struct decode_header *next;
+ bool matched = false;
+
+ insn = prepare_emulated_insn(insn, asi, thumb);
+
+ for (;; h = next) {
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+ u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS;
+
+ if (type == DECODE_TYPE_END)
+ return INSN_REJECTED;
+
+ next = (struct decode_header *)
+ ((uintptr_t)h + decode_struct_sizes[type]);
+
+ if (!matched && (insn & h->mask.bits) != h->value.bits)
+ continue;
+
+ if (!decode_regs(&insn, regs))
+ return INSN_REJECTED;
+
+ switch (type) {
+
+ case DECODE_TYPE_TABLE: {
+ struct decode_table *d = (struct decode_table *)h;
+ next = (struct decode_header *)d->table.table;
+ break;
+ }
+
+ case DECODE_TYPE_CUSTOM: {
+ struct decode_custom *d = (struct decode_custom *)h;
+ return (*d->decoder.decoder)(insn, asi);
+ }
+
+ case DECODE_TYPE_SIMULATE: {
+ struct decode_simulate *d = (struct decode_simulate *)h;
+ asi->insn_handler = d->handler.handler;
+ return INSN_GOOD_NO_SLOT;
+ }
+
+ case DECODE_TYPE_EMULATE: {
+ struct decode_emulate *d = (struct decode_emulate *)h;
+ asi->insn_handler = d->handler.handler;
+ set_emulated_insn(insn, asi, thumb);
+ return INSN_GOOD;
+ }
+
+ case DECODE_TYPE_OR:
+ matched = true;
+ break;
+
+ case DECODE_TYPE_REJECT:
+ default:
+ return INSN_REJECTED;
+ }
+ }
+ }
+++ /dev/null
-/*
- * arch/arm/kernel/kprobes-decode.c
- *
- * Copyright (C) 2006, 2007 Motorola Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- */
-
-/*
- * We do not have hardware single-stepping on ARM, This
- * effort is further complicated by the ARM not having a
- * "next PC" register. Instructions that change the PC
- * can't be safely single-stepped in a MP environment, so
- * we have a lot of work to do:
- *
- * In the prepare phase:
- * *) If it is an instruction that does anything
- * with the CPU mode, we reject it for a kprobe.
- * (This is out of laziness rather than need. The
- * instructions could be simulated.)
- *
- * *) Otherwise, decode the instruction rewriting its
- * registers to take fixed, ordered registers and
- * setting a handler for it to run the instruction.
- *
- * In the execution phase by an instruction's handler:
- *
- * *) If the PC is written to by the instruction, the
- * instruction must be fully simulated in software.
- *
- * *) Otherwise, a modified form of the instruction is
- * directly executed. Its handler calls the
- * instruction in insn[0]. In insn[1] is a
- * "mov pc, lr" to return.
- *
- * Before calling, load up the reordered registers
- * from the original instruction's registers. If one
- * of the original input registers is the PC, compute
- * and adjust the appropriate input register.
- *
- * After call completes, copy the output registers to
- * the original instruction's original registers.
- *
- * We don't use a real breakpoint instruction since that
- * would have us in the kernel go from SVC mode to SVC
- * mode losing the link register. Instead we use an
- * undefined instruction. To simplify processing, the
- * undefined instruction used for kprobes must be reserved
- * exclusively for kprobes use.
- *
- * TODO: ifdef out some instruction decoding based on architecture.
- */
-
-#include <linux/kernel.h>
-#include <linux/kprobes.h>
-
-#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit)))))
-
-#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25)
-
-#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos))
-
-/*
- * Test if load/store instructions writeback the address register.
- * if P (bit 24) == 0 or W (bit 21) == 1
- */
-#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
-
-#define PSR_fs (PSR_f|PSR_s)
-
-#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */
-
-typedef long (insn_0arg_fn_t)(void);
-typedef long (insn_1arg_fn_t)(long);
-typedef long (insn_2arg_fn_t)(long, long);
-typedef long (insn_3arg_fn_t)(long, long, long);
-typedef long (insn_4arg_fn_t)(long, long, long, long);
-typedef long long (insn_llret_0arg_fn_t)(void);
-typedef long long (insn_llret_3arg_fn_t)(long, long, long);
-typedef long long (insn_llret_4arg_fn_t)(long, long, long, long);
-
-union reg_pair {
- long long dr;
-#ifdef __LITTLE_ENDIAN
- struct { long r0, r1; };
-#else
- struct { long r1, r0; };
-#endif
-};
-
-/*
- * For STR and STM instructions, an ARM core may choose to use either
- * a +8 or a +12 displacement from the current instruction's address.
- * Whichever value is chosen for a given core, it must be the same for
- * both instructions and may not change. This function measures it.
- */
-
-static int str_pc_offset;
-
-static void __init find_str_pc_offset(void)
-{
- int addr, scratch, ret;
-
- __asm__ (
- "sub %[ret], pc, #4 \n\t"
- "str pc, %[addr] \n\t"
- "ldr %[scr], %[addr] \n\t"
- "sub %[ret], %[scr], %[ret] \n\t"
- : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr));
-
- str_pc_offset = ret;
-}
-
-/*
- * The insnslot_?arg_r[w]flags() functions below are to keep the
- * msr -> *fn -> mrs instruction sequences indivisible so that
- * the state of the CPSR flags aren't inadvertently modified
- * just before or just after the call.
- */
-
-static inline long __kprobes
-insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn)
-{
- register long ret asm("r0");
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret)
- : [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- return ret;
-}
-
-static inline long long __kprobes
-insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn)
-{
- register long ret0 asm("r0");
- register long ret1 asm("r1");
- union reg_pair fnr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret0), "=r" (ret1)
- : [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- fnr.r0 = ret0;
- fnr.r1 = ret1;
- return fnr.dr;
-}
-
-static inline long __kprobes
-insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long ret asm("r0");
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret)
- : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- return ret;
-}
-
-static inline long __kprobes
-insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long ret asm("r0");
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret)
- : "0" (rr0), "r" (rr1),
- [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- return ret;
-}
-
-static inline long __kprobes
-insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long ret asm("r0");
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret)
- : "0" (rr0), "r" (rr1), "r" (rr2),
- [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- return ret;
-}
-
-static inline long long __kprobes
-insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr,
- insn_llret_3arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long ret0 asm("r0");
- register long ret1 asm("r1");
- union reg_pair fnr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret0), "=r" (ret1)
- : "0" (rr0), "r" (rr1), "r" (rr2),
- [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- fnr.r0 = ret0;
- fnr.r1 = ret1;
- return fnr.dr;
-}
-
-static inline long __kprobes
-insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr,
- insn_4arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long rr3 asm("r3") = r3;
- register long ret asm("r0");
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[cpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- : "=r" (ret)
- : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
- [cpsr] "r" (cpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- return ret;
-}
-
-static inline long __kprobes
-insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long ret asm("r0");
- long oldcpsr = *cpsr;
- long newcpsr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[oldcpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- "mrs %[newcpsr], cpsr \n\t"
- : "=r" (ret), [newcpsr] "=r" (newcpsr)
- : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
- return ret;
-}
-
-static inline long __kprobes
-insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long ret asm("r0");
- long oldcpsr = *cpsr;
- long newcpsr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[oldcpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- "mrs %[newcpsr], cpsr \n\t"
- : "=r" (ret), [newcpsr] "=r" (newcpsr)
- : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
- return ret;
-}
-
-static inline long __kprobes
-insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr,
- insn_3arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long ret asm("r0");
- long oldcpsr = *cpsr;
- long newcpsr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[oldcpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- "mrs %[newcpsr], cpsr \n\t"
- : "=r" (ret), [newcpsr] "=r" (newcpsr)
- : "0" (rr0), "r" (rr1), "r" (rr2),
- [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
- return ret;
-}
-
-static inline long __kprobes
-insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
- insn_4arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long rr3 asm("r3") = r3;
- register long ret asm("r0");
- long oldcpsr = *cpsr;
- long newcpsr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[oldcpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- "mrs %[newcpsr], cpsr \n\t"
- : "=r" (ret), [newcpsr] "=r" (newcpsr)
- : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
- [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
- return ret;
-}
-
-static inline long long __kprobes
-insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr,
- insn_llret_4arg_fn_t *fn)
-{
- register long rr0 asm("r0") = r0;
- register long rr1 asm("r1") = r1;
- register long rr2 asm("r2") = r2;
- register long rr3 asm("r3") = r3;
- register long ret0 asm("r0");
- register long ret1 asm("r1");
- long oldcpsr = *cpsr;
- long newcpsr;
- union reg_pair fnr;
-
- __asm__ __volatile__ (
- "msr cpsr_fs, %[oldcpsr] \n\t"
- "mov lr, pc \n\t"
- "mov pc, %[fn] \n\t"
- "mrs %[newcpsr], cpsr \n\t"
- : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr)
- : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3),
- [oldcpsr] "r" (oldcpsr), [fn] "r" (fn)
- : "lr", "cc"
- );
- *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs);
- fnr.r0 = ret0;
- fnr.r1 = ret1;
- return fnr.dr;
-}
-
-/*
- * To avoid the complications of mimicing single-stepping on a
- * processor without a Next-PC or a single-step mode, and to
- * avoid having to deal with the side-effects of boosting, we
- * simulate or emulate (almost) all ARM instructions.
- *
- * "Simulation" is where the instruction's behavior is duplicated in
- * C code. "Emulation" is where the original instruction is rewritten
- * and executed, often by altering its registers.
- *
- * By having all behavior of the kprobe'd instruction completed before
- * returning from the kprobe_handler(), all locks (scheduler and
- * interrupt) can safely be released. There is no need for secondary
- * breakpoints, no race with MP or preemptable kernels, nor having to
- * clean up resources counts at a later time impacting overall system
- * performance. By rewriting the instruction, only the minimum registers
- * need to be loaded and saved back optimizing performance.
- *
- * Calling the insnslot_*_rwflags version of a function doesn't hurt
- * anything even when the CPSR flags aren't updated by the
- * instruction. It's just a little slower in return for saving
- * a little space by not having a duplicate function that doesn't
- * update the flags. (The same optimization can be said for
- * instructions that do or don't perform register writeback)
- * Also, instructions can either read the flags, only write the
- * flags, or read and write the flags. To save combinations
- * rather than for sheer performance, flag functions just assume
- * read and write of flags.
- */
-
-static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs)
-{
- kprobe_opcode_t insn = p->opcode;
- long iaddr = (long)p->addr;
- int disp = branch_displacement(insn);
-
- if (insn & (1 << 24))
- regs->ARM_lr = iaddr + 4;
-
- regs->ARM_pc = iaddr + 8 + disp;
-}
-
-static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs)
-{
- kprobe_opcode_t insn = p->opcode;
- long iaddr = (long)p->addr;
- int disp = branch_displacement(insn);
-
- regs->ARM_lr = iaddr + 4;
- regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2);
- regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs)
-{
- kprobe_opcode_t insn = p->opcode;
- int rm = insn & 0xf;
- long rmv = regs->uregs[rm];
-
- if (insn & (1 << 5))
- regs->ARM_lr = (long)p->addr + 4;
-
- regs->ARM_pc = rmv & ~0x1;
- regs->ARM_cpsr &= ~PSR_T_BIT;
- if (rmv & 0x1)
- regs->ARM_cpsr |= PSR_T_BIT;
-}
-
-static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs)
-{
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- unsigned long mask = 0xf8ff03df; /* Mask out execution state */
- regs->uregs[rd] = regs->ARM_cpsr & mask;
-}
-
-static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs)
-{
- kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
- int lbit = insn & (1 << 20);
- int wbit = insn & (1 << 21);
- int ubit = insn & (1 << 23);
- int pbit = insn & (1 << 24);
- long *addr = (long *)regs->uregs[rn];
- int reg_bit_vector;
- int reg_count;
-
- reg_count = 0;
- reg_bit_vector = insn & 0xffff;
- while (reg_bit_vector) {
- reg_bit_vector &= (reg_bit_vector - 1);
- ++reg_count;
- }
-
- if (!ubit)
- addr -= reg_count;
- addr += (!pbit == !ubit);
-
- reg_bit_vector = insn & 0xffff;
- while (reg_bit_vector) {
- int reg = __ffs(reg_bit_vector);
- reg_bit_vector &= (reg_bit_vector - 1);
- if (lbit)
- regs->uregs[reg] = *addr++;
- else
- *addr++ = regs->uregs[reg];
- }
-
- if (wbit) {
- if (!ubit)
- addr -= reg_count;
- addr -= (!pbit == !ubit);
- regs->uregs[rn] = (long)addr;
- }
-}
-
-static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs)
-{
- regs->ARM_pc = (long)p->addr + str_pc_offset;
- simulate_ldm1stm1(p, regs);
- regs->ARM_pc = (long)p->addr + 4;
-}
-
-static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs)
-{
- regs->uregs[12] = regs->uregs[13];
-}
-
-static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf; /* rm may be invalid, don't care. */
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
-
- /* Not following the C calling convention here, so need asm(). */
- __asm__ __volatile__ (
- "ldr r0, %[rn] \n\t"
- "ldr r1, %[rm] \n\t"
- "msr cpsr_fs, %[cpsr]\n\t"
- "mov lr, pc \n\t"
- "mov pc, %[i_fn] \n\t"
- "str r0, %[rn] \n\t" /* in case of writeback */
- "str r2, %[rd0] \n\t"
- "str r3, %[rd1] \n\t"
- : [rn] "+m" (rnv),
- [rd0] "=m" (regs->uregs[rd]),
- [rd1] "=m" (regs->uregs[rd+1])
- : [rm] "m" (rmv),
- [cpsr] "r" (regs->ARM_cpsr),
- [i_fn] "r" (i_fn)
- : "r0", "r1", "r2", "r3", "lr", "cc"
- );
- if (is_writeback(insn))
- regs->uregs[rn] = rnv;
-}
-
-static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs)
-{
- insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf;
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
- /* rm/rmv may be invalid, don't care. */
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long rnv_wb;
-
- rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd],
- regs->uregs[rd+1],
- regs->ARM_cpsr, i_fn);
- if (is_writeback(insn))
- regs->uregs[rn] = rnv_wb;
-}
-
-static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
-{
- insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- union reg_pair fnr;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf;
- long rdv;
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long cpsr = regs->ARM_cpsr;
-
- fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);
- if (rn != 15)
- regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */
- rdv = fnr.r1;
-
- if (rd == 15) {
-#if __LINUX_ARM_ARCH__ >= 5
- cpsr &= ~PSR_T_BIT;
- if (rdv & 0x1)
- cpsr |= PSR_T_BIT;
- regs->ARM_cpsr = cpsr;
- rdv &= ~0x1;
-#else
- rdv &= ~0x2;
-#endif
- }
- regs->uregs[rd] = rdv;
-}
-
-static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs)
-{
- insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long iaddr = (long)p->addr;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf;
- long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd];
- long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn];
- long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
- long rnv_wb;
-
- rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn);
- if (rn != 15)
- regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */
-}
-
-static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rm = insn & 0xf;
- long rmv = regs->uregs[rm];
-
- /* Writes Q flag */
- regs->uregs[rd] = insnslot_1arg_rwflags(rmv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf;
- long rnv = regs->uregs[rn];
- long rmv = regs->uregs[rm];
-
- /* Reads GE bits */
- regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs)
-{
- insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0];
-
- insnslot_0arg_rflags(regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs)
-{
-}
-
-static void __kprobes
-emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- long rdv = regs->uregs[rd];
-
- regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = insn & 0xf;
- long rdv = regs->uregs[rd];
- long rnv = regs->uregs[rn];
-
- regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rm = insn & 0xf;
- long rmv = regs->uregs[rm];
-
- regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- int rm = insn & 0xf;
- long rnv = regs->uregs[rn];
- long rmv = regs->uregs[rm];
-
- regs->uregs[rd] =
- insnslot_2arg_rwflags(rnv, rmv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 16) & 0xf;
- int rn = (insn >> 12) & 0xf;
- int rs = (insn >> 8) & 0xf;
- int rm = insn & 0xf;
- long rnv = regs->uregs[rn];
- long rsv = regs->uregs[rs];
- long rmv = regs->uregs[rm];
-
- regs->uregs[rd] =
- insnslot_3arg_rwflags(rnv, rsv, rmv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 16) & 0xf;
- int rs = (insn >> 8) & 0xf;
- int rm = insn & 0xf;
- long rsv = regs->uregs[rs];
- long rmv = regs->uregs[rm];
-
- regs->uregs[rd] =
- insnslot_2arg_rwflags(rsv, rmv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- union reg_pair fnr;
- int rdhi = (insn >> 16) & 0xf;
- int rdlo = (insn >> 12) & 0xf;
- int rs = (insn >> 8) & 0xf;
- int rm = insn & 0xf;
- long rsv = regs->uregs[rs];
- long rmv = regs->uregs[rm];
-
- fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi],
- regs->uregs[rdlo], rsv, rmv,
- ®s->ARM_cpsr, i_fn);
- regs->uregs[rdhi] = fnr.r0;
- regs->uregs[rdlo] = fnr.r1;
-}
-
-static void __kprobes
-emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
-
- regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf;
- long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
-
- regs->uregs[rd] = insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs)
-{
- insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- int rn = (insn >> 16) & 0xf;
- long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn];
-
- insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
- int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
- int rm = insn & 0xf;
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long rsv = regs->uregs[rs];
-
- regs->uregs[rd] =
- insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs)
-{
- insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- int rd = (insn >> 12) & 0xf;
- int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */
- int rs = (insn >> 8) & 0xf; /* invalid, don't care. */
- int rm = insn & 0xf;
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long rsv = regs->uregs[rs];
-
- regs->uregs[rd] =
- insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn);
-}
-
-static void __kprobes
-emulate_alu_tests(struct kprobe *p, struct pt_regs *regs)
-{
- insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0];
- kprobe_opcode_t insn = p->opcode;
- long ppc = (long)p->addr + 8;
- int rn = (insn >> 16) & 0xf;
- int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */
- int rm = insn & 0xf;
- long rnv = (rn == 15) ? ppc : regs->uregs[rn];
- long rmv = (rm == 15) ? ppc : regs->uregs[rm];
- long rsv = regs->uregs[rs];
-
- insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn);
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25))
- : (~insn & (1 << 22));
-
- if (is_writeback(insn) && is_r15(insn, 16))
- return INSN_REJECTED; /* Writeback to PC */
-
- insn &= 0xfff00fff;
- insn |= 0x00001000; /* Rn = r0, Rd = r1 */
- if (not_imm) {
- insn &= ~0xf;
- insn |= 2; /* Rm = r2 */
- }
- asi->insn[0] = insn;
- asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xffff0fff; /* Rd = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12_modify;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd12rn0_modify(kprobe_opcode_t insn,
- struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xffff0ff0; /* Rd = r0 */
- insn |= 0x00000001; /* Rn = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12rn0_modify;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12rm0;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn,
- struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
- insn |= 0x00000001; /* Rm = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd12rn16rm0_rwflags;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn,
- struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 16))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */
- insn |= 0x00000001; /* Rm = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd16rs8rm0_rwflags;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn,
- struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 16))
- return INSN_REJECTED; /* Rd is PC */
-
- insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */
- insn |= 0x00000102; /* Rs = r1, Rm = r2 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags;
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn,
- struct arch_specific_insn *asi)
-{
- if (is_r15(insn, 16) || is_r15(insn, 12))
- return INSN_REJECTED; /* RdHi or RdLo is PC */
-
- insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */
- insn |= 0x00001203; /* Rs = r2, Rm = r3 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags;
- return INSN_GOOD;
-}
-
-/*
- * For the instruction masking and comparisons in all the "space_*"
- * functions below, Do _not_ rearrange the order of tests unless
- * you're very, very sure of what you are doing. For the sake of
- * efficiency, the masks for some tests sometimes assume other test
- * have been done prior to them so the number of patterns to test
- * for an instruction set can be as broad as possible to reduce the
- * number of tests needed.
- */
-
-static enum kprobe_insn __kprobes
-space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */
- /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */
- /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */
- /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */
- if ((insn & 0xfe300000) == 0xf4100000) {
- asi->insn_handler = emulate_nop;
- return INSN_GOOD_NO_SLOT;
- }
-
- /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */
- if ((insn & 0xfe000000) == 0xfa000000) {
- asi->insn_handler = simulate_blx1;
- return INSN_GOOD_NO_SLOT;
- }
-
- /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */
- /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */
-
- /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */
- /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
-
- /* Coprocessor instructions... */
- /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
- /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */
- /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-
- return INSN_REJECTED;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */
- if ((insn & 0x0f900010) == 0x01000000) {
-
- /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */
- if ((insn & 0x0ff000f0) == 0x01000000) {
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
- asi->insn_handler = simulate_mrs;
- return INSN_GOOD_NO_SLOT;
- }
-
- /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */
- if ((insn & 0x0ff00090) == 0x01400080)
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
- asi);
-
- /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */
- /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */
- if ((insn & 0x0ff000b0) == 0x012000a0 ||
- (insn & 0x0ff00090) == 0x01600080)
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
-
- /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */
- /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */
- if ((insn & 0x0ff00090) == 0x01000080 ||
- (insn & 0x0ff000b0) == 0x01200080)
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-
- /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */
- /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */
- /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */
-
- /* Other instruction encodings aren't yet defined */
- return INSN_REJECTED;
- }
-
- /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */
- else if ((insn & 0x0f900090) == 0x01000010) {
-
- /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */
- /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */
- if ((insn & 0x0ff000d0) == 0x01200010) {
- if ((insn & 0x0ff000ff) == 0x0120003f)
- return INSN_REJECTED; /* BLX pc */
- asi->insn_handler = simulate_blx2bx;
- return INSN_GOOD_NO_SLOT;
- }
-
- /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */
- if ((insn & 0x0ff000f0) == 0x01600010)
- return prep_emulate_rd12rm0(insn, asi);
-
- /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */
- /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */
- /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */
- /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */
- if ((insn & 0x0f9000f0) == 0x01000050)
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
-
- /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */
- /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */
-
- /* Other instruction encodings aren't yet defined */
- return INSN_REJECTED;
- }
-
- /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */
- else if ((insn & 0x0f0000f0) == 0x00000090) {
-
- /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */
- /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */
- /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */
- /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */
- /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */
- /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */
- /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */
- /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */
- /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */
- /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */
- /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */
- /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */
- /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */
- /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */
- /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */
- /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */
- if ((insn & 0x00d00000) == 0x00500000)
- return INSN_REJECTED;
- else if ((insn & 0x00e00000) == 0x00000000)
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
- else if ((insn & 0x00a00000) == 0x00200000)
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- else
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn,
- asi);
- }
-
- /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */
- else if ((insn & 0x0e000090) == 0x00000090) {
-
- /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */
- /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */
- /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */
- /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */
- /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */
- /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */
- /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */
- /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */
- /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */
- /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */
- /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */
- /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */
- /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */
-
- /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */
- /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */
- /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */
- /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */
- /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */
- /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */
- if ((insn & 0x0f0000f0) == 0x01000090) {
- if ((insn & 0x0fb000f0) == 0x01000090) {
- /* SWP/SWPB */
- return prep_emulate_rd12rn16rm0_wflags(insn,
- asi);
- } else {
- /* STREX/LDREX variants and unallocaed space */
- return INSN_REJECTED;
- }
-
- } else if ((insn & 0x0e1000d0) == 0x00000d0) {
- /* STRD/LDRD */
- if ((insn & 0x0000e000) == 0x0000e000)
- return INSN_REJECTED; /* Rd is LR or PC */
- if (is_writeback(insn) && is_r15(insn, 16))
- return INSN_REJECTED; /* Writeback to PC */
-
- insn &= 0xfff00fff;
- insn |= 0x00002000; /* Rn = r0, Rd = r2 */
- if (!(insn & (1 << 22))) {
- /* Register index */
- insn &= ~0xf;
- insn |= 1; /* Rm = r1 */
- }
- asi->insn[0] = insn;
- asi->insn_handler =
- (insn & (1 << 5)) ? emulate_strd : emulate_ldrd;
- return INSN_GOOD;
- }
-
- /* LDRH/STRH/LDRSB/LDRSH */
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
- return prep_emulate_ldr_str(insn, asi);
- }
-
- /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */
-
- /*
- * ALU op with S bit and Rd == 15 :
- * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx
- */
- if ((insn & 0x0e10f000) == 0x0010f000)
- return INSN_REJECTED;
-
- /*
- * "mov ip, sp" is the most common kprobe'd instruction by far.
- * Check and optimize for it explicitly.
- */
- if (insn == 0xe1a0c00d) {
- asi->insn_handler = simulate_mov_ipsp;
- return INSN_GOOD_NO_SLOT;
- }
-
- /*
- * Data processing: Immediate-shift / Register-shift
- * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx
- * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx
- * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx
- * *S (bit 20) updates condition codes
- * ADC/SBC/RSC reads the C flag
- */
- insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */
- insn |= 0x00000001; /* Rm = r1 */
- if (insn & 0x010) {
- insn &= 0xfffff0ff; /* register shift */
- insn |= 0x00000200; /* Rs = r2 */
- }
- asi->insn[0] = insn;
-
- if ((insn & 0x0f900000) == 0x01100000) {
- /*
- * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx
- * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx
- * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx
- * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx
- */
- asi->insn_handler = emulate_alu_tests;
- } else {
- /* ALU ops which write to Rd */
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
- emulate_alu_rwflags : emulate_alu_rflags;
- }
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */
- /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */
- if ((insn & 0x0fb00000) == 0x03000000)
- return prep_emulate_rd12_modify(insn, asi);
-
- /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */
- if ((insn & 0x0fff0000) == 0x03200000) {
- unsigned op2 = insn & 0x000000ff;
- if (op2 == 0x01 || op2 == 0x04) {
- /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */
- /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_none;
- return INSN_GOOD;
- } else if (op2 <= 0x03) {
- /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */
- /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */
- /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */
- /*
- * We make WFE and WFI true NOPs to avoid stalls due
- * to missing events whilst processing the probe.
- */
- asi->insn_handler = emulate_nop;
- return INSN_GOOD_NO_SLOT;
- }
- /* For DBG and unallocated hints it's safest to reject them */
- return INSN_REJECTED;
- }
-
- /*
- * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx
- * ALU op with S bit and Rd == 15 :
- * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx
- */
- if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */
- (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */
- return INSN_REJECTED;
-
- /*
- * Data processing: 32-bit Immediate
- * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx
- * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx
- * *S (bit 20) updates condition codes
- * ADC/SBC/RSC reads the C flag
- */
- insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */
- asi->insn[0] = insn;
-
- if ((insn & 0x0f900000) == 0x03100000) {
- /*
- * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx
- * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx
- * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx
- * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx
- */
- asi->insn_handler = emulate_alu_tests_imm;
- } else {
- /* ALU ops which write to Rd */
- asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */
- emulate_alu_imm_rwflags : emulate_alu_imm_rflags;
- }
- return INSN_GOOD;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */
- if ((insn & 0x0ff000f0) == 0x068000b0) {
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
- insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */
- insn |= 0x00000001; /* Rm = r1 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_sel;
- return INSN_GOOD;
- }
-
- /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */
- /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */
- /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */
- /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */
- if ((insn & 0x0fa00030) == 0x06a00010 ||
- (insn & 0x0fb000f0) == 0x06a00030) {
- if (is_r15(insn, 12))
- return INSN_REJECTED; /* Rd is PC */
- insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */
- asi->insn[0] = insn;
- asi->insn_handler = emulate_sat;
- return INSN_GOOD;
- }
-
- /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */
- /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */
- /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */
- /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */
- if ((insn & 0x0ff00070) == 0x06b00030 ||
- (insn & 0x0ff00070) == 0x06f00030)
- return prep_emulate_rd12rm0(insn, asi);
-
- /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */
- /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */
- /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */
- /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */
- /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */
- /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */
- /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */
- /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */
- /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */
- /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */
- /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */
- /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */
- /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */
- /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */
- /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */
- /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */
- /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */
- /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */
- /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */
- /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */
- /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */
- /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */
- /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */
- /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */
- /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */
- /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */
- /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */
- /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */
- /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */
- /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */
- /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */
- /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */
- /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */
- /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */
- /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */
- /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */
- /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */
- /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */
- /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */
- /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */
- /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */
- /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */
- /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */
- /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */
- /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */
- if ((insn & 0x0f800010) == 0x06000010) {
- if ((insn & 0x00300000) == 0x00000000 ||
- (insn & 0x000000e0) == 0x000000a0 ||
- (insn & 0x000000e0) == 0x000000c0)
- return INSN_REJECTED; /* Unallocated space */
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
- }
-
- /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */
- /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */
- if ((insn & 0x0ff00030) == 0x06800010)
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
-
- /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */
- /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */
- /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */
- /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */
- /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */
- /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */
- /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */
- /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */
- /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */
- /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */
- /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */
- if ((insn & 0x0f8000f0) == 0x06800070) {
- if ((insn & 0x00300000) == 0x00100000)
- return INSN_REJECTED; /* Unallocated space */
-
- if ((insn & 0x000f0000) == 0x000f0000)
- return prep_emulate_rd12rm0(insn, asi);
- else
- return prep_emulate_rd12rn16rm0_wflags(insn, asi);
- }
-
- /* Other instruction encodings aren't yet defined */
- return INSN_REJECTED;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */
- if ((insn & 0x0ff000f0) == 0x03f000f0)
- return INSN_REJECTED;
-
- /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */
- /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */
- if ((insn & 0x0ff00090) == 0x07400010)
- return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi);
-
- /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */
- /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */
- /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */
- /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */
- /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */
- /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */
- /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */
- /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */
- if ((insn & 0x0ff00090) == 0x07000010 ||
- (insn & 0x0ff000d0) == 0x07500010 ||
- (insn & 0x0ff000f0) == 0x07800010) {
-
- if ((insn & 0x0000f000) == 0x0000f000)
- return prep_emulate_rd16rs8rm0_wflags(insn, asi);
- else
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
- }
-
- /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */
- if ((insn & 0x0ff000d0) == 0x075000d0)
- return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi);
-
- /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */
- /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */
- if ((insn & 0x0fa00070) == 0x07a00050)
- return prep_emulate_rd12rm0(insn, asi);
-
- /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */
- /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */
- if ((insn & 0x0fe00070) == 0x07c00010) {
-
- if ((insn & 0x0000000f) == 0x0000000f)
- return prep_emulate_rd12_modify(insn, asi);
- else
- return prep_emulate_rd12rn0_modify(insn, asi);
- }
-
- return INSN_REJECTED;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */
- /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */
- /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */
- /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */
- /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */
- /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */
- /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */
- /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */
-
- if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12))
- return INSN_REJECTED; /* LDRB into PC */
-
- return prep_emulate_ldr_str(insn, asi);
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */
- /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */
- if ((insn & 0x0e708000) == 0x85000000 ||
- (insn & 0x0e508000) == 0x85010000)
- return INSN_REJECTED;
-
- /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */
- /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */
- asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */
- simulate_stm1_pc : simulate_ldm1stm1;
- return INSN_GOOD_NO_SLOT;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */
- /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */
- asi->insn_handler = simulate_bbl;
- return INSN_GOOD_NO_SLOT;
-}
-
-static enum kprobe_insn __kprobes
-space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- /* Coprocessor instructions... */
- /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
- /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */
- /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */
- /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */
- /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */
- /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */
- /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */
-
- /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */
-
- return INSN_REJECTED;
-}
-
-static unsigned long __kprobes __check_eq(unsigned long cpsr)
-{
- return cpsr & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_ne(unsigned long cpsr)
-{
- return (~cpsr) & PSR_Z_BIT;
-}
-
-static unsigned long __kprobes __check_cs(unsigned long cpsr)
-{
- return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_cc(unsigned long cpsr)
-{
- return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_mi(unsigned long cpsr)
-{
- return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_pl(unsigned long cpsr)
-{
- return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_vs(unsigned long cpsr)
-{
- return cpsr & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_vc(unsigned long cpsr)
-{
- return (~cpsr) & PSR_V_BIT;
-}
-
-static unsigned long __kprobes __check_hi(unsigned long cpsr)
-{
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return cpsr & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ls(unsigned long cpsr)
-{
- cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
- return (~cpsr) & PSR_C_BIT;
-}
-
-static unsigned long __kprobes __check_ge(unsigned long cpsr)
-{
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return (~cpsr) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_lt(unsigned long cpsr)
-{
- cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- return cpsr & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_gt(unsigned long cpsr)
-{
- unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return (~temp) & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_le(unsigned long cpsr)
-{
- unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
- temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
- return temp & PSR_N_BIT;
-}
-
-static unsigned long __kprobes __check_al(unsigned long cpsr)
-{
- return true;
-}
-
-static kprobe_check_cc * const condition_checks[16] = {
- &__check_eq, &__check_ne, &__check_cs, &__check_cc,
- &__check_mi, &__check_pl, &__check_vs, &__check_vc,
- &__check_hi, &__check_ls, &__check_ge, &__check_lt,
- &__check_gt, &__check_le, &__check_al, &__check_al
-};
-
-/* Return:
- * INSN_REJECTED If instruction is one not allowed to kprobe,
- * INSN_GOOD If instruction is supported and uses instruction slot,
- * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot.
- *
- * For instructions we don't want to kprobe (INSN_REJECTED return result):
- * These are generally ones that modify the processor state making
- * them "hard" to simulate such as switches processor modes or
- * make accesses in alternate modes. Any of these could be simulated
- * if the work was put into it, but low return considering they
- * should also be very rare.
- */
-enum kprobe_insn __kprobes
-arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
-{
- asi->insn_check_cc = condition_checks[insn>>28];
- asi->insn[1] = KPROBE_RETURN_INSTRUCTION;
-
- if ((insn & 0xf0000000) == 0xf0000000)
-
- return space_1111(insn, asi);
-
- else if ((insn & 0x0e000000) == 0x00000000)
-
- return space_cccc_000x(insn, asi);
-
- else if ((insn & 0x0e000000) == 0x02000000)
-
- return space_cccc_001x(insn, asi);
-
- else if ((insn & 0x0f000010) == 0x06000010)
-
- return space_cccc_0110__1(insn, asi);
-
- else if ((insn & 0x0f000010) == 0x07000010)
-
- return space_cccc_0111__1(insn, asi);
-
- else if ((insn & 0x0c000000) == 0x04000000)
-
- return space_cccc_01xx(insn, asi);
-
- else if ((insn & 0x0e000000) == 0x08000000)
-
- return space_cccc_100x(insn, asi);
-
- else if ((insn & 0x0e000000) == 0x0a000000)
-
- return space_cccc_101x(insn, asi);
-
- return space_cccc_11xx(insn, asi);
-}
-
-void __init arm_kprobe_decode_init(void)
-{
- find_str_pc_offset();
-}
--- /dev/null
+/*
+ * arch/arm/kernel/kprobes-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+
+
+/*
+ * True if current instruction is in an IT block.
+ */
+#define in_it_block(cpsr) ((cpsr & 0x06000c00) != 0x00000000)
+
+/*
+ * Return the condition code to check for the currently executing instruction.
+ * This is in ITSTATE<7:4> which is in CPSR<15:12> but is only valid if
+ * in_it_block returns true.
+ */
+#define current_cond(cpsr) ((cpsr >> 12) & 0xf)
+
+/*
+ * Return the PC value for a probe in thumb code.
+ * This is the address of the probed instruction plus 4.
+ * We subtract one because the address will have bit zero set to indicate
+ * a pointer to thumb code.
+ */
+static inline unsigned long __kprobes thumb_probe_pc(struct kprobe *p)
+{
+ return (unsigned long)p->addr - 1 + 4;
+}
+
+static void __kprobes
+t32_simulate_table_branch(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ unsigned long rnv = (rn == 15) ? pc : regs->uregs[rn];
+ unsigned long rmv = regs->uregs[rm];
+ unsigned int halfwords;
+
+ if (insn & 0x10) /* TBH */
+ halfwords = ((u16 *)rnv)[rmv];
+ else /* TBB */
+ halfwords = ((u8 *)rnv)[rmv];
+
+ regs->ARM_pc = pc + 2 * halfwords;
+}
+
+static void __kprobes
+t32_simulate_mrs(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 8) & 0xf;
+ unsigned long mask = 0xf8ff03df; /* Mask out execution state */
+ regs->uregs[rd] = regs->ARM_cpsr & mask;
+}
+
+static void __kprobes
+t32_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+
+ long offset = insn & 0x7ff; /* imm11 */
+ offset += (insn & 0x003f0000) >> 5; /* imm6 */
+ offset += (insn & 0x00002000) << 4; /* J1 */
+ offset += (insn & 0x00000800) << 7; /* J2 */
+ offset -= (insn & 0x04000000) >> 7; /* Apply sign bit */
+
+ regs->ARM_pc = pc + (offset * 2);
+}
+
+static enum kprobe_insn __kprobes
+t32_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ int cc = (insn >> 22) & 0xf;
+ asi->insn_check_cc = kprobe_condition_checks[cc];
+ asi->insn_handler = t32_simulate_cond_branch;
+ return INSN_GOOD_NO_SLOT;
+}
+
+static void __kprobes
+t32_simulate_branch(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+
+ long offset = insn & 0x7ff; /* imm11 */
+ offset += (insn & 0x03ff0000) >> 5; /* imm10 */
+ offset += (insn & 0x00002000) << 9; /* J1 */
+ offset += (insn & 0x00000800) << 10; /* J2 */
+ if (insn & 0x04000000)
+ offset -= 0x00800000; /* Apply sign bit */
+ else
+ offset ^= 0x00600000; /* Invert J1 and J2 */
+
+ if (insn & (1 << 14)) {
+ /* BL or BLX */
+ regs->ARM_lr = (unsigned long)p->addr + 4;
+ if (!(insn & (1 << 12))) {
+ /* BLX so switch to ARM mode */
+ regs->ARM_cpsr &= ~PSR_T_BIT;
+ pc &= ~3;
+ }
+ }
+
+ regs->ARM_pc = pc + (offset * 2);
+}
+
+static void __kprobes
+t32_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long addr = thumb_probe_pc(p) & ~3;
+ int rt = (insn >> 12) & 0xf;
+ unsigned long rtv;
+
+ long offset = insn & 0xfff;
+ if (insn & 0x00800000)
+ addr += offset;
+ else
+ addr -= offset;
+
+ if (insn & 0x00400000) {
+ /* LDR */
+ rtv = *(unsigned long *)addr;
+ if (rt == 15) {
+ bx_write_pc(rtv, regs);
+ return;
+ }
+ } else if (insn & 0x00200000) {
+ /* LDRH */
+ if (insn & 0x01000000)
+ rtv = *(s16 *)addr;
+ else
+ rtv = *(u16 *)addr;
+ } else {
+ /* LDRB */
+ if (insn & 0x01000000)
+ rtv = *(s8 *)addr;
+ else
+ rtv = *(u8 *)addr;
+ }
+
+ regs->uregs[rt] = rtv;
+}
+
+static enum kprobe_insn __kprobes
+t32_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ enum kprobe_insn ret = kprobe_decode_ldmstm(insn, asi);
+
+ /* Fixup modified instruction to have halfwords in correct order...*/
+ insn = asi->insn[0];
+ ((u16 *)asi->insn)[0] = insn >> 16;
+ ((u16 *)asi->insn)[1] = insn & 0xffff;
+
+ return ret;
+}
+
+static void __kprobes
+t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p) & ~3;
+ int rt1 = (insn >> 12) & 0xf;
+ int rt2 = (insn >> 8) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+
+ register unsigned long rt1v asm("r0") = regs->uregs[rt1];
+ register unsigned long rt2v asm("r1") = regs->uregs[rt2];
+ register unsigned long rnv asm("r2") = (rn == 15) ? pc
+ : regs->uregs[rn];
+
+ __asm__ __volatile__ (
+ "blx %[fn]"
+ : "=r" (rt1v), "=r" (rt2v), "=r" (rnv)
+ : "0" (rt1v), "1" (rt2v), "2" (rnv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ if (rn != 15)
+ regs->uregs[rn] = rnv; /* Writeback base register */
+ regs->uregs[rt1] = rt1v;
+ regs->uregs[rt2] = rt2v;
+}
+
+static void __kprobes
+t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rt = (insn >> 12) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rtv asm("r0") = regs->uregs[rt];
+ register unsigned long rnv asm("r2") = regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ "blx %[fn]"
+ : "=r" (rtv), "=r" (rnv)
+ : "0" (rtv), "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rn] = rnv; /* Writeback base register */
+ if (rt == 15) /* Can't be true for a STR as they aren't allowed */
+ bx_write_pc(rtv, regs);
+ else
+ regs->uregs[rt] = rtv;
+}
+
+static void __kprobes
+t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 8) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rdv asm("r1") = regs->uregs[rd];
+ register unsigned long rnv asm("r2") = regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "blx %[fn] \n\t"
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdv), [cpsr] "=r" (cpsr)
+ : "0" (rdv), "r" (rnv), "r" (rmv),
+ "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+static void __kprobes
+t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ int rd = (insn >> 8) & 0xf;
+
+ register unsigned long rdv asm("r1") = regs->uregs[rd];
+ register unsigned long rnv asm("r2") = pc & ~3;
+
+ __asm__ __volatile__ (
+ "blx %[fn]"
+ : "=r" (rdv)
+ : "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes
+t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rd = (insn >> 8) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+
+ register unsigned long rdv asm("r1") = regs->uregs[rd];
+ register unsigned long rnv asm("r2") = regs->uregs[rn];
+
+ __asm__ __volatile__ (
+ "blx %[fn]"
+ : "=r" (rdv)
+ : "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rd] = rdv;
+}
+
+static void __kprobes
+t32_emulate_rdlo12rdhi8rn16rm0_noflags(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rdlo = (insn >> 12) & 0xf;
+ int rdhi = (insn >> 8) & 0xf;
+ int rn = (insn >> 16) & 0xf;
+ int rm = insn & 0xf;
+
+ register unsigned long rdlov asm("r0") = regs->uregs[rdlo];
+ register unsigned long rdhiv asm("r1") = regs->uregs[rdhi];
+ register unsigned long rnv asm("r2") = regs->uregs[rn];
+ register unsigned long rmv asm("r3") = regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ "blx %[fn]"
+ : "=r" (rdlov), "=r" (rdhiv)
+ : "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv),
+ [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ regs->uregs[rdlo] = rdlov;
+ regs->uregs[rdhi] = rdhiv;
+}
+
+/* These emulation encodings are functionally equivalent... */
+#define t32_emulate_rd8rn16rm0ra12_noflags \
+ t32_emulate_rdlo12rdhi8rn16rm0_noflags
+
+static const union decode_item t32_table_1110_100x_x0xx[] = {
+ /* Load/store multiple instructions */
+
+ /* Rn is PC 1110 100x x0xx 1111 xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfe4f0000, 0xe80f0000),
+
+ /* SRS 1110 1000 00x0 xxxx xxxx xxxx xxxx xxxx */
+ /* RFE 1110 1000 00x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffc00000, 0xe8000000),
+ /* SRS 1110 1001 10x0 xxxx xxxx xxxx xxxx xxxx */
+ /* RFE 1110 1001 10x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffc00000, 0xe9800000),
+
+ /* STM Rn, {...pc} 1110 100x x0x0 xxxx 1xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfe508000, 0xe8008000),
+ /* LDM Rn, {...lr,pc} 1110 100x x0x1 xxxx 11xx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfe50c000, 0xe810c000),
+ /* LDM/STM Rn, {...sp} 1110 100x x0xx xxxx xx1x xxxx xxxx xxxx */
+ DECODE_REJECT (0xfe402000, 0xe8002000),
+
+ /* STMIA 1110 1000 10x0 xxxx xxxx xxxx xxxx xxxx */
+ /* LDMIA 1110 1000 10x1 xxxx xxxx xxxx xxxx xxxx */
+ /* STMDB 1110 1001 00x0 xxxx xxxx xxxx xxxx xxxx */
+ /* LDMDB 1110 1001 00x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_CUSTOM (0xfe400000, 0xe8000000, t32_decode_ldmstm),
+
+ DECODE_END
+};
+
+static const union decode_item t32_table_1110_100x_x1xx[] = {
+ /* Load/store dual, load/store exclusive, table branch */
+
+ /* STRD (immediate) 1110 1000 x110 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRD (immediate) 1110 1000 x111 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_OR (0xff600000, 0xe8600000),
+ /* STRD (immediate) 1110 1001 x1x0 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRD (immediate) 1110 1001 x1x1 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xff400000, 0xe9400000, t32_emulate_ldrdstrd,
+ REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)),
+
+ /* TBB 1110 1000 1101 xxxx xxxx xxxx 0000 xxxx */
+ /* TBH 1110 1000 1101 xxxx xxxx xxxx 0001 xxxx */
+ DECODE_SIMULATEX(0xfff000e0, 0xe8d00000, t32_simulate_table_branch,
+ REGS(NOSP, 0, 0, 0, NOSPPC)),
+
+ /* STREX 1110 1000 0100 xxxx xxxx xxxx xxxx xxxx */
+ /* LDREX 1110 1000 0101 xxxx xxxx xxxx xxxx xxxx */
+ /* STREXB 1110 1000 1100 xxxx xxxx xxxx 0100 xxxx */
+ /* STREXH 1110 1000 1100 xxxx xxxx xxxx 0101 xxxx */
+ /* STREXD 1110 1000 1100 xxxx xxxx xxxx 0111 xxxx */
+ /* LDREXB 1110 1000 1101 xxxx xxxx xxxx 0100 xxxx */
+ /* LDREXH 1110 1000 1101 xxxx xxxx xxxx 0101 xxxx */
+ /* LDREXD 1110 1000 1101 xxxx xxxx xxxx 0111 xxxx */
+ /* And unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item t32_table_1110_101x[] = {
+ /* Data-processing (shifted register) */
+
+ /* TST 1110 1010 0001 xxxx xxxx 1111 xxxx xxxx */
+ /* TEQ 1110 1010 1001 xxxx xxxx 1111 xxxx xxxx */
+ DECODE_EMULATEX (0xff700f00, 0xea100f00, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, 0, 0, NOSPPC)),
+
+ /* CMN 1110 1011 0001 xxxx xxxx 1111 xxxx xxxx */
+ DECODE_OR (0xfff00f00, 0xeb100f00),
+ /* CMP 1110 1011 1011 xxxx xxxx 1111 xxxx xxxx */
+ DECODE_EMULATEX (0xfff00f00, 0xebb00f00, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOPC, 0, 0, 0, NOSPPC)),
+
+ /* MOV 1110 1010 010x 1111 xxxx xxxx xxxx xxxx */
+ /* MVN 1110 1010 011x 1111 xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xffcf0000, 0xea4f0000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(0, 0, NOSPPC, 0, NOSPPC)),
+
+ /* ??? 1110 1010 101x xxxx xxxx xxxx xxxx xxxx */
+ /* ??? 1110 1010 111x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffa00000, 0xeaa00000),
+ /* ??? 1110 1011 001x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffe00000, 0xeb200000),
+ /* ??? 1110 1011 100x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffe00000, 0xeb800000),
+ /* ??? 1110 1011 111x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xffe00000, 0xebe00000),
+
+ /* ADD/SUB SP, SP, Rm, LSL #0..3 */
+ /* 1110 1011 x0xx 1101 x000 1101 xx00 xxxx */
+ DECODE_EMULATEX (0xff4f7f30, 0xeb0d0d00, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(SP, 0, SP, 0, NOSPPC)),
+
+ /* ADD/SUB SP, SP, Rm, shift */
+ /* 1110 1011 x0xx 1101 xxxx 1101 xxxx xxxx */
+ DECODE_REJECT (0xff4f0f00, 0xeb0d0d00),
+
+ /* ADD/SUB Rd, SP, Rm, shift */
+ /* 1110 1011 x0xx 1101 xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xff4f0000, 0xeb0d0000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(SP, 0, NOPC, 0, NOSPPC)),
+
+ /* AND 1110 1010 000x xxxx xxxx xxxx xxxx xxxx */
+ /* BIC 1110 1010 001x xxxx xxxx xxxx xxxx xxxx */
+ /* ORR 1110 1010 010x xxxx xxxx xxxx xxxx xxxx */
+ /* ORN 1110 1010 011x xxxx xxxx xxxx xxxx xxxx */
+ /* EOR 1110 1010 100x xxxx xxxx xxxx xxxx xxxx */
+ /* PKH 1110 1010 110x xxxx xxxx xxxx xxxx xxxx */
+ /* ADD 1110 1011 000x xxxx xxxx xxxx xxxx xxxx */
+ /* ADC 1110 1011 010x xxxx xxxx xxxx xxxx xxxx */
+ /* SBC 1110 1011 011x xxxx xxxx xxxx xxxx xxxx */
+ /* SUB 1110 1011 101x xxxx xxxx xxxx xxxx xxxx */
+ /* RSB 1110 1011 110x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfe000000, 0xea000000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_0x0x___0[] = {
+ /* Data-processing (modified immediate) */
+
+ /* TST 1111 0x00 0001 xxxx 0xxx 1111 xxxx xxxx */
+ /* TEQ 1111 0x00 1001 xxxx 0xxx 1111 xxxx xxxx */
+ DECODE_EMULATEX (0xfb708f00, 0xf0100f00, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, 0, 0, 0)),
+
+ /* CMN 1111 0x01 0001 xxxx 0xxx 1111 xxxx xxxx */
+ DECODE_OR (0xfbf08f00, 0xf1100f00),
+ /* CMP 1111 0x01 1011 xxxx 0xxx 1111 xxxx xxxx */
+ DECODE_EMULATEX (0xfbf08f00, 0xf1b00f00, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOPC, 0, 0, 0, 0)),
+
+ /* MOV 1111 0x00 010x 1111 0xxx xxxx xxxx xxxx */
+ /* MVN 1111 0x00 011x 1111 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfbcf8000, 0xf04f0000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(0, 0, NOSPPC, 0, 0)),
+
+ /* ??? 1111 0x00 101x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfbe08000, 0xf0a00000),
+ /* ??? 1111 0x00 110x xxxx 0xxx xxxx xxxx xxxx */
+ /* ??? 1111 0x00 111x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfbc08000, 0xf0c00000),
+ /* ??? 1111 0x01 001x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfbe08000, 0xf1200000),
+ /* ??? 1111 0x01 100x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfbe08000, 0xf1800000),
+ /* ??? 1111 0x01 111x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfbe08000, 0xf1e00000),
+
+ /* ADD Rd, SP, #imm 1111 0x01 000x 1101 0xxx xxxx xxxx xxxx */
+ /* SUB Rd, SP, #imm 1111 0x01 101x 1101 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfb4f8000, 0xf10d0000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(SP, 0, NOPC, 0, 0)),
+
+ /* AND 1111 0x00 000x xxxx 0xxx xxxx xxxx xxxx */
+ /* BIC 1111 0x00 001x xxxx 0xxx xxxx xxxx xxxx */
+ /* ORR 1111 0x00 010x xxxx 0xxx xxxx xxxx xxxx */
+ /* ORN 1111 0x00 011x xxxx 0xxx xxxx xxxx xxxx */
+ /* EOR 1111 0x00 100x xxxx 0xxx xxxx xxxx xxxx */
+ /* ADD 1111 0x01 000x xxxx 0xxx xxxx xxxx xxxx */
+ /* ADC 1111 0x01 010x xxxx 0xxx xxxx xxxx xxxx */
+ /* SBC 1111 0x01 011x xxxx 0xxx xxxx xxxx xxxx */
+ /* SUB 1111 0x01 101x xxxx 0xxx xxxx xxxx xxxx */
+ /* RSB 1111 0x01 110x xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfa008000, 0xf0000000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_0x1x___0[] = {
+ /* Data-processing (plain binary immediate) */
+
+ /* ADDW Rd, PC, #imm 1111 0x10 0000 1111 0xxx xxxx xxxx xxxx */
+ DECODE_OR (0xfbff8000, 0xf20f0000),
+ /* SUBW Rd, PC, #imm 1111 0x10 1010 1111 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfbff8000, 0xf2af0000, t32_emulate_rd8pc16_noflags,
+ REGS(PC, 0, NOSPPC, 0, 0)),
+
+ /* ADDW SP, SP, #imm 1111 0x10 0000 1101 0xxx 1101 xxxx xxxx */
+ DECODE_OR (0xfbff8f00, 0xf20d0d00),
+ /* SUBW SP, SP, #imm 1111 0x10 1010 1101 0xxx 1101 xxxx xxxx */
+ DECODE_EMULATEX (0xfbff8f00, 0xf2ad0d00, t32_emulate_rd8rn16_noflags,
+ REGS(SP, 0, SP, 0, 0)),
+
+ /* ADDW 1111 0x10 0000 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_OR (0xfbf08000, 0xf2000000),
+ /* SUBW 1111 0x10 1010 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfbf08000, 0xf2a00000, t32_emulate_rd8rn16_noflags,
+ REGS(NOPCX, 0, NOSPPC, 0, 0)),
+
+ /* MOVW 1111 0x10 0100 xxxx 0xxx xxxx xxxx xxxx */
+ /* MOVT 1111 0x10 1100 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfb708000, 0xf2400000, t32_emulate_rd8rn16_noflags,
+ REGS(0, 0, NOSPPC, 0, 0)),
+
+ /* SSAT16 1111 0x11 0010 xxxx 0000 xxxx 00xx xxxx */
+ /* SSAT 1111 0x11 00x0 xxxx 0xxx xxxx xxxx xxxx */
+ /* USAT16 1111 0x11 1010 xxxx 0000 xxxx 00xx xxxx */
+ /* USAT 1111 0x11 10x0 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfb508000, 0xf3000000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+ /* SFBX 1111 0x11 0100 xxxx 0xxx xxxx xxxx xxxx */
+ /* UFBX 1111 0x11 1100 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfb708000, 0xf3400000, t32_emulate_rd8rn16_noflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, 0)),
+
+ /* BFC 1111 0x11 0110 1111 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfbff8000, 0xf36f0000, t32_emulate_rd8rn16_noflags,
+ REGS(0, 0, NOSPPC, 0, 0)),
+
+ /* BFI 1111 0x11 0110 xxxx 0xxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfbf08000, 0xf3600000, t32_emulate_rd8rn16_noflags,
+ REGS(NOSPPCX, 0, NOSPPC, 0, 0)),
+
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_0xxx___1[] = {
+ /* Branches and miscellaneous control */
+
+ /* YIELD 1111 0011 1010 xxxx 10x0 x000 0000 0001 */
+ DECODE_OR (0xfff0d7ff, 0xf3a08001),
+ /* SEV 1111 0011 1010 xxxx 10x0 x000 0000 0100 */
+ DECODE_EMULATE (0xfff0d7ff, 0xf3a08004, kprobe_emulate_none),
+ /* NOP 1111 0011 1010 xxxx 10x0 x000 0000 0000 */
+ /* WFE 1111 0011 1010 xxxx 10x0 x000 0000 0010 */
+ /* WFI 1111 0011 1010 xxxx 10x0 x000 0000 0011 */
+ DECODE_SIMULATE (0xfff0d7fc, 0xf3a08000, kprobe_simulate_nop),
+
+ /* MRS Rd, CPSR 1111 0011 1110 xxxx 10x0 xxxx xxxx xxxx */
+ DECODE_SIMULATEX(0xfff0d000, 0xf3e08000, t32_simulate_mrs,
+ REGS(0, 0, NOSPPC, 0, 0)),
+
+ /*
+ * Unsupported instructions
+ * 1111 0x11 1xxx xxxx 10x0 xxxx xxxx xxxx
+ *
+ * MSR 1111 0011 100x xxxx 10x0 xxxx xxxx xxxx
+ * DBG hint 1111 0011 1010 xxxx 10x0 x000 1111 xxxx
+ * Unallocated hints 1111 0011 1010 xxxx 10x0 x000 xxxx xxxx
+ * CPS 1111 0011 1010 xxxx 10x0 xxxx xxxx xxxx
+ * CLREX/DSB/DMB/ISB 1111 0011 1011 xxxx 10x0 xxxx xxxx xxxx
+ * BXJ 1111 0011 1100 xxxx 10x0 xxxx xxxx xxxx
+ * SUBS PC,LR,#<imm8> 1111 0011 1101 xxxx 10x0 xxxx xxxx xxxx
+ * MRS Rd, SPSR 1111 0011 1111 xxxx 10x0 xxxx xxxx xxxx
+ * SMC 1111 0111 1111 xxxx 1000 xxxx xxxx xxxx
+ * UNDEFINED 1111 0111 1111 xxxx 1010 xxxx xxxx xxxx
+ * ??? 1111 0111 1xxx xxxx 1010 xxxx xxxx xxxx
+ */
+ DECODE_REJECT (0xfb80d000, 0xf3808000),
+
+ /* Bcc 1111 0xxx xxxx xxxx 10x0 xxxx xxxx xxxx */
+ DECODE_CUSTOM (0xf800d000, 0xf0008000, t32_decode_cond_branch),
+
+ /* BLX 1111 0xxx xxxx xxxx 11x0 xxxx xxxx xxx0 */
+ DECODE_OR (0xf800d001, 0xf000c000),
+ /* B 1111 0xxx xxxx xxxx 10x1 xxxx xxxx xxxx */
+ /* BL 1111 0xxx xxxx xxxx 11x1 xxxx xxxx xxxx */
+ DECODE_SIMULATE (0xf8009000, 0xf0009000, t32_simulate_branch),
+
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_100x_x0x1__1111[] = {
+ /* Memory hints */
+
+ /* PLD (literal) 1111 1000 x001 1111 1111 xxxx xxxx xxxx */
+ /* PLI (literal) 1111 1001 x001 1111 1111 xxxx xxxx xxxx */
+ DECODE_SIMULATE (0xfe7ff000, 0xf81ff000, kprobe_simulate_nop),
+
+ /* PLD{W} (immediate) 1111 1000 10x1 xxxx 1111 xxxx xxxx xxxx */
+ DECODE_OR (0xffd0f000, 0xf890f000),
+ /* PLD{W} (immediate) 1111 1000 00x1 xxxx 1111 1100 xxxx xxxx */
+ DECODE_OR (0xffd0ff00, 0xf810fc00),
+ /* PLI (immediate) 1111 1001 1001 xxxx 1111 xxxx xxxx xxxx */
+ DECODE_OR (0xfff0f000, 0xf990f000),
+ /* PLI (immediate) 1111 1001 0001 xxxx 1111 1100 xxxx xxxx */
+ DECODE_SIMULATEX(0xfff0ff00, 0xf910fc00, kprobe_simulate_nop,
+ REGS(NOPCX, 0, 0, 0, 0)),
+
+ /* PLD{W} (register) 1111 1000 00x1 xxxx 1111 0000 00xx xxxx */
+ DECODE_OR (0xffd0ffc0, 0xf810f000),
+ /* PLI (register) 1111 1001 0001 xxxx 1111 0000 00xx xxxx */
+ DECODE_SIMULATEX(0xfff0ffc0, 0xf910f000, kprobe_simulate_nop,
+ REGS(NOPCX, 0, 0, 0, NOSPPC)),
+
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_100x[] = {
+ /* Store/Load single data item */
+
+ /* ??? 1111 100x x11x xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfe600000, 0xf8600000),
+
+ /* ??? 1111 1001 0101 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xfff00000, 0xf9500000),
+
+ /* ??? 1111 100x 0xxx xxxx xxxx 10x0 xxxx xxxx */
+ DECODE_REJECT (0xfe800d00, 0xf8000800),
+
+ /* STRBT 1111 1000 0000 xxxx xxxx 1110 xxxx xxxx */
+ /* STRHT 1111 1000 0010 xxxx xxxx 1110 xxxx xxxx */
+ /* STRT 1111 1000 0100 xxxx xxxx 1110 xxxx xxxx */
+ /* LDRBT 1111 1000 0001 xxxx xxxx 1110 xxxx xxxx */
+ /* LDRSBT 1111 1001 0001 xxxx xxxx 1110 xxxx xxxx */
+ /* LDRHT 1111 1000 0011 xxxx xxxx 1110 xxxx xxxx */
+ /* LDRSHT 1111 1001 0011 xxxx xxxx 1110 xxxx xxxx */
+ /* LDRT 1111 1000 0101 xxxx xxxx 1110 xxxx xxxx */
+ DECODE_REJECT (0xfe800f00, 0xf8000e00),
+
+ /* STR{,B,H} Rn,[PC...] 1111 1000 xxx0 1111 xxxx xxxx xxxx xxxx */
+ DECODE_REJECT (0xff1f0000, 0xf80f0000),
+
+ /* STR{,B,H} PC,[Rn...] 1111 1000 xxx0 xxxx 1111 xxxx xxxx xxxx */
+ DECODE_REJECT (0xff10f000, 0xf800f000),
+
+ /* LDR (literal) 1111 1000 x101 1111 xxxx xxxx xxxx xxxx */
+ DECODE_SIMULATEX(0xff7f0000, 0xf85f0000, t32_simulate_ldr_literal,
+ REGS(PC, ANY, 0, 0, 0)),
+
+ /* STR (immediate) 1111 1000 0100 xxxx xxxx 1xxx xxxx xxxx */
+ /* LDR (immediate) 1111 1000 0101 xxxx xxxx 1xxx xxxx xxxx */
+ DECODE_OR (0xffe00800, 0xf8400800),
+ /* STR (immediate) 1111 1000 1100 xxxx xxxx xxxx xxxx xxxx */
+ /* LDR (immediate) 1111 1000 1101 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xffe00000, 0xf8c00000, t32_emulate_ldrstr,
+ REGS(NOPCX, ANY, 0, 0, 0)),
+
+ /* STR (register) 1111 1000 0100 xxxx xxxx 0000 00xx xxxx */
+ /* LDR (register) 1111 1000 0101 xxxx xxxx 0000 00xx xxxx */
+ DECODE_EMULATEX (0xffe00fc0, 0xf8400000, t32_emulate_ldrstr,
+ REGS(NOPCX, ANY, 0, 0, NOSPPC)),
+
+ /* LDRB (literal) 1111 1000 x001 1111 xxxx xxxx xxxx xxxx */
+ /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
+ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
+ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ REGS(PC, NOSPPCX, 0, 0, 0)),
+
+ /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
+ /* STRH (immediate) 1111 1000 0010 xxxx xxxx 1xxx xxxx xxxx */
+ /* LDRB (immediate) 1111 1000 0001 xxxx xxxx 1xxx xxxx xxxx */
+ /* LDRSB (immediate) 1111 1001 0001 xxxx xxxx 1xxx xxxx xxxx */
+ /* LDRH (immediate) 1111 1000 0011 xxxx xxxx 1xxx xxxx xxxx */
+ /* LDRSH (immediate) 1111 1001 0011 xxxx xxxx 1xxx xxxx xxxx */
+ DECODE_OR (0xfec00800, 0xf8000800),
+ /* STRB (immediate) 1111 1000 1000 xxxx xxxx xxxx xxxx xxxx */
+ /* STRH (immediate) 1111 1000 1010 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRB (immediate) 1111 1000 1001 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRSB (immediate) 1111 1001 1001 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRH (immediate) 1111 1000 1011 xxxx xxxx xxxx xxxx xxxx */
+ /* LDRSH (immediate) 1111 1001 1011 xxxx xxxx xxxx xxxx xxxx */
+ DECODE_EMULATEX (0xfec00000, 0xf8800000, t32_emulate_ldrstr,
+ REGS(NOPCX, NOSPPCX, 0, 0, 0)),
+
+ /* STRB (register) 1111 1000 0000 xxxx xxxx 0000 00xx xxxx */
+ /* STRH (register) 1111 1000 0010 xxxx xxxx 0000 00xx xxxx */
+ /* LDRB (register) 1111 1000 0001 xxxx xxxx 0000 00xx xxxx */
+ /* LDRSB (register) 1111 1001 0001 xxxx xxxx 0000 00xx xxxx */
+ /* LDRH (register) 1111 1000 0011 xxxx xxxx 0000 00xx xxxx */
+ /* LDRSH (register) 1111 1001 0011 xxxx xxxx 0000 00xx xxxx */
+ DECODE_EMULATEX (0xfe800fc0, 0xf8000000, t32_emulate_ldrstr,
+ REGS(NOPCX, NOSPPCX, 0, 0, NOSPPC)),
+
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_1010___1111[] = {
+ /* Data-processing (register) */
+
+ /* ??? 1111 1010 011x xxxx 1111 xxxx 1xxx xxxx */
+ DECODE_REJECT (0xffe0f080, 0xfa60f080),
+
+ /* SXTH 1111 1010 0000 1111 1111 xxxx 1xxx xxxx */
+ /* UXTH 1111 1010 0001 1111 1111 xxxx 1xxx xxxx */
+ /* SXTB16 1111 1010 0010 1111 1111 xxxx 1xxx xxxx */
+ /* UXTB16 1111 1010 0011 1111 1111 xxxx 1xxx xxxx */
+ /* SXTB 1111 1010 0100 1111 1111 xxxx 1xxx xxxx */
+ /* UXTB 1111 1010 0101 1111 1111 xxxx 1xxx xxxx */
+ DECODE_EMULATEX (0xff8ff080, 0xfa0ff080, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(0, 0, NOSPPC, 0, NOSPPC)),
+
+
+ /* ??? 1111 1010 1xxx xxxx 1111 xxxx 0x11 xxxx */
+ DECODE_REJECT (0xff80f0b0, 0xfa80f030),
+ /* ??? 1111 1010 1x11 xxxx 1111 xxxx 0xxx xxxx */
+ DECODE_REJECT (0xffb0f080, 0xfab0f000),
+
+ /* SADD16 1111 1010 1001 xxxx 1111 xxxx 0000 xxxx */
+ /* SASX 1111 1010 1010 xxxx 1111 xxxx 0000 xxxx */
+ /* SSAX 1111 1010 1110 xxxx 1111 xxxx 0000 xxxx */
+ /* SSUB16 1111 1010 1101 xxxx 1111 xxxx 0000 xxxx */
+ /* SADD8 1111 1010 1000 xxxx 1111 xxxx 0000 xxxx */
+ /* SSUB8 1111 1010 1100 xxxx 1111 xxxx 0000 xxxx */
+
+ /* QADD16 1111 1010 1001 xxxx 1111 xxxx 0001 xxxx */
+ /* QASX 1111 1010 1010 xxxx 1111 xxxx 0001 xxxx */
+ /* QSAX 1111 1010 1110 xxxx 1111 xxxx 0001 xxxx */
+ /* QSUB16 1111 1010 1101 xxxx 1111 xxxx 0001 xxxx */
+ /* QADD8 1111 1010 1000 xxxx 1111 xxxx 0001 xxxx */
+ /* QSUB8 1111 1010 1100 xxxx 1111 xxxx 0001 xxxx */
+
+ /* SHADD16 1111 1010 1001 xxxx 1111 xxxx 0010 xxxx */
+ /* SHASX 1111 1010 1010 xxxx 1111 xxxx 0010 xxxx */
+ /* SHSAX 1111 1010 1110 xxxx 1111 xxxx 0010 xxxx */
+ /* SHSUB16 1111 1010 1101 xxxx 1111 xxxx 0010 xxxx */
+ /* SHADD8 1111 1010 1000 xxxx 1111 xxxx 0010 xxxx */
+ /* SHSUB8 1111 1010 1100 xxxx 1111 xxxx 0010 xxxx */
+
+ /* UADD16 1111 1010 1001 xxxx 1111 xxxx 0100 xxxx */
+ /* UASX 1111 1010 1010 xxxx 1111 xxxx 0100 xxxx */
+ /* USAX 1111 1010 1110 xxxx 1111 xxxx 0100 xxxx */
+ /* USUB16 1111 1010 1101 xxxx 1111 xxxx 0100 xxxx */
+ /* UADD8 1111 1010 1000 xxxx 1111 xxxx 0100 xxxx */
+ /* USUB8 1111 1010 1100 xxxx 1111 xxxx 0100 xxxx */
+
+ /* UQADD16 1111 1010 1001 xxxx 1111 xxxx 0101 xxxx */
+ /* UQASX 1111 1010 1010 xxxx 1111 xxxx 0101 xxxx */
+ /* UQSAX 1111 1010 1110 xxxx 1111 xxxx 0101 xxxx */
+ /* UQSUB16 1111 1010 1101 xxxx 1111 xxxx 0101 xxxx */
+ /* UQADD8 1111 1010 1000 xxxx 1111 xxxx 0101 xxxx */
+ /* UQSUB8 1111 1010 1100 xxxx 1111 xxxx 0101 xxxx */
+
+ /* UHADD16 1111 1010 1001 xxxx 1111 xxxx 0110 xxxx */
+ /* UHASX 1111 1010 1010 xxxx 1111 xxxx 0110 xxxx */
+ /* UHSAX 1111 1010 1110 xxxx 1111 xxxx 0110 xxxx */
+ /* UHSUB16 1111 1010 1101 xxxx 1111 xxxx 0110 xxxx */
+ /* UHADD8 1111 1010 1000 xxxx 1111 xxxx 0110 xxxx */
+ /* UHSUB8 1111 1010 1100 xxxx 1111 xxxx 0110 xxxx */
+ DECODE_OR (0xff80f080, 0xfa80f000),
+
+ /* SXTAH 1111 1010 0000 xxxx 1111 xxxx 1xxx xxxx */
+ /* UXTAH 1111 1010 0001 xxxx 1111 xxxx 1xxx xxxx */
+ /* SXTAB16 1111 1010 0010 xxxx 1111 xxxx 1xxx xxxx */
+ /* UXTAB16 1111 1010 0011 xxxx 1111 xxxx 1xxx xxxx */
+ /* SXTAB 1111 1010 0100 xxxx 1111 xxxx 1xxx xxxx */
+ /* UXTAB 1111 1010 0101 xxxx 1111 xxxx 1xxx xxxx */
+ DECODE_OR (0xff80f080, 0xfa00f080),
+
+ /* QADD 1111 1010 1000 xxxx 1111 xxxx 1000 xxxx */
+ /* QDADD 1111 1010 1000 xxxx 1111 xxxx 1001 xxxx */
+ /* QSUB 1111 1010 1000 xxxx 1111 xxxx 1010 xxxx */
+ /* QDSUB 1111 1010 1000 xxxx 1111 xxxx 1011 xxxx */
+ DECODE_OR (0xfff0f0c0, 0xfa80f080),
+
+ /* SEL 1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
+ DECODE_OR (0xfff0f0f0, 0xfaa0f080),
+
+ /* LSL 1111 1010 000x xxxx 1111 xxxx 0000 xxxx */
+ /* LSR 1111 1010 001x xxxx 1111 xxxx 0000 xxxx */
+ /* ASR 1111 1010 010x xxxx 1111 xxxx 0000 xxxx */
+ /* ROR 1111 1010 011x xxxx 1111 xxxx 0000 xxxx */
+ DECODE_EMULATEX (0xff80f0f0, 0xfa00f000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+ /* CLZ 1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */
+ DECODE_OR (0xfff0f0f0, 0xfab0f080),
+
+ /* REV 1111 1010 1001 xxxx 1111 xxxx 1000 xxxx */
+ /* REV16 1111 1010 1001 xxxx 1111 xxxx 1001 xxxx */
+ /* RBIT 1111 1010 1001 xxxx 1111 xxxx 1010 xxxx */
+ /* REVSH 1111 1010 1001 xxxx 1111 xxxx 1011 xxxx */
+ DECODE_EMULATEX (0xfff0f0c0, 0xfa90f080, t32_emulate_rd8rn16_noflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, SAMEAS16)),
+
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_1011_0[] = {
+ /* Multiply, multiply accumulate, and absolute difference */
+
+ /* ??? 1111 1011 0000 xxxx 1111 xxxx 0001 xxxx */
+ DECODE_REJECT (0xfff0f0f0, 0xfb00f010),
+ /* ??? 1111 1011 0111 xxxx 1111 xxxx 0001 xxxx */
+ DECODE_REJECT (0xfff0f0f0, 0xfb70f010),
+
+ /* SMULxy 1111 1011 0001 xxxx 1111 xxxx 00xx xxxx */
+ DECODE_OR (0xfff0f0c0, 0xfb10f000),
+ /* MUL 1111 1011 0000 xxxx 1111 xxxx 0000 xxxx */
+ /* SMUAD{X} 1111 1011 0010 xxxx 1111 xxxx 000x xxxx */
+ /* SMULWy 1111 1011 0011 xxxx 1111 xxxx 000x xxxx */
+ /* SMUSD{X} 1111 1011 0100 xxxx 1111 xxxx 000x xxxx */
+ /* SMMUL{R} 1111 1011 0101 xxxx 1111 xxxx 000x xxxx */
+ /* USAD8 1111 1011 0111 xxxx 1111 xxxx 0000 xxxx */
+ DECODE_EMULATEX (0xff80f0e0, 0xfb00f000, t32_emulate_rd8rn16rm0_rwflags,
+ REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)),
+
+ /* ??? 1111 1011 0111 xxxx xxxx xxxx 0001 xxxx */
+ DECODE_REJECT (0xfff000f0, 0xfb700010),
+
+ /* SMLAxy 1111 1011 0001 xxxx xxxx xxxx 00xx xxxx */
+ DECODE_OR (0xfff000c0, 0xfb100000),
+ /* MLA 1111 1011 0000 xxxx xxxx xxxx 0000 xxxx */
+ /* MLS 1111 1011 0000 xxxx xxxx xxxx 0001 xxxx */
+ /* SMLAD{X} 1111 1011 0010 xxxx xxxx xxxx 000x xxxx */
+ /* SMLAWy 1111 1011 0011 xxxx xxxx xxxx 000x xxxx */
+ /* SMLSD{X} 1111 1011 0100 xxxx xxxx xxxx 000x xxxx */
+ /* SMMLA{R} 1111 1011 0101 xxxx xxxx xxxx 000x xxxx */
+ /* SMMLS{R} 1111 1011 0110 xxxx xxxx xxxx 000x xxxx */
+ /* USADA8 1111 1011 0111 xxxx xxxx xxxx 0000 xxxx */
+ DECODE_EMULATEX (0xff8000c0, 0xfb000000, t32_emulate_rd8rn16rm0ra12_noflags,
+ REGS(NOSPPC, NOSPPCX, NOSPPC, 0, NOSPPC)),
+
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+static const union decode_item t32_table_1111_1011_1[] = {
+ /* Long multiply, long multiply accumulate, and divide */
+
+ /* UMAAL 1111 1011 1110 xxxx xxxx xxxx 0110 xxxx */
+ DECODE_OR (0xfff000f0, 0xfbe00060),
+ /* SMLALxy 1111 1011 1100 xxxx xxxx xxxx 10xx xxxx */
+ DECODE_OR (0xfff000c0, 0xfbc00080),
+ /* SMLALD{X} 1111 1011 1100 xxxx xxxx xxxx 110x xxxx */
+ /* SMLSLD{X} 1111 1011 1101 xxxx xxxx xxxx 110x xxxx */
+ DECODE_OR (0xffe000e0, 0xfbc000c0),
+ /* SMULL 1111 1011 1000 xxxx xxxx xxxx 0000 xxxx */
+ /* UMULL 1111 1011 1010 xxxx xxxx xxxx 0000 xxxx */
+ /* SMLAL 1111 1011 1100 xxxx xxxx xxxx 0000 xxxx */
+ /* UMLAL 1111 1011 1110 xxxx xxxx xxxx 0000 xxxx */
+ DECODE_EMULATEX (0xff9000f0, 0xfb800000, t32_emulate_rdlo12rdhi8rn16rm0_noflags,
+ REGS(NOSPPC, NOSPPC, NOSPPC, 0, NOSPPC)),
+
+ /* SDIV 1111 1011 1001 xxxx xxxx xxxx 1111 xxxx */
+ /* UDIV 1111 1011 1011 xxxx xxxx xxxx 1111 xxxx */
+ /* Other unallocated instructions... */
+ DECODE_END
+};
+
+const union decode_item kprobe_decode_thumb32_table[] = {
+
+ /*
+ * Load/store multiple instructions
+ * 1110 100x x0xx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfe400000, 0xe8000000, t32_table_1110_100x_x0xx),
+
+ /*
+ * Load/store dual, load/store exclusive, table branch
+ * 1110 100x x1xx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfe400000, 0xe8400000, t32_table_1110_100x_x1xx),
+
+ /*
+ * Data-processing (shifted register)
+ * 1110 101x xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfe000000, 0xea000000, t32_table_1110_101x),
+
+ /*
+ * Coprocessor instructions
+ * 1110 11xx xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_REJECT (0xfc000000, 0xec000000),
+
+ /*
+ * Data-processing (modified immediate)
+ * 1111 0x0x xxxx xxxx 0xxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfa008000, 0xf0000000, t32_table_1111_0x0x___0),
+
+ /*
+ * Data-processing (plain binary immediate)
+ * 1111 0x1x xxxx xxxx 0xxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfa008000, 0xf2000000, t32_table_1111_0x1x___0),
+
+ /*
+ * Branches and miscellaneous control
+ * 1111 0xxx xxxx xxxx 1xxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xf8008000, 0xf0008000, t32_table_1111_0xxx___1),
+
+ /*
+ * Advanced SIMD element or structure load/store instructions
+ * 1111 1001 xxx0 xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_REJECT (0xff100000, 0xf9000000),
+
+ /*
+ * Memory hints
+ * 1111 100x x0x1 xxxx 1111 xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfe50f000, 0xf810f000, t32_table_1111_100x_x0x1__1111),
+
+ /*
+ * Store single data item
+ * 1111 1000 xxx0 xxxx xxxx xxxx xxxx xxxx
+ * Load single data items
+ * 1111 100x xxx1 xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xfe000000, 0xf8000000, t32_table_1111_100x),
+
+ /*
+ * Data-processing (register)
+ * 1111 1010 xxxx xxxx 1111 xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xff00f000, 0xfa00f000, t32_table_1111_1010___1111),
+
+ /*
+ * Multiply, multiply accumulate, and absolute difference
+ * 1111 1011 0xxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xff800000, 0xfb000000, t32_table_1111_1011_0),
+
+ /*
+ * Long multiply, long multiply accumulate, and divide
+ * 1111 1011 1xxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xff800000, 0xfb800000, t32_table_1111_1011_1),
+
+ /*
+ * Coprocessor instructions
+ * 1111 11xx xxxx xxxx xxxx xxxx xxxx xxxx
+ */
+ DECODE_END
+};
+
+static void __kprobes
+t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ int rm = (insn >> 3) & 0xf;
+ unsigned long rmv = (rm == 15) ? pc : regs->uregs[rm];
+
+ if (insn & (1 << 7)) /* BLX ? */
+ regs->ARM_lr = (unsigned long)p->addr + 2;
+
+ bx_write_pc(rmv, regs);
+}
+
+static void __kprobes
+t16_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long* base = (unsigned long *)(thumb_probe_pc(p) & ~3);
+ long index = insn & 0xff;
+ int rt = (insn >> 8) & 0x7;
+ regs->uregs[rt] = base[index];
+}
+
+static void __kprobes
+t16_simulate_ldrstr_sp_relative(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long* base = (unsigned long *)regs->ARM_sp;
+ long index = insn & 0xff;
+ int rt = (insn >> 8) & 0x7;
+ if (insn & 0x800) /* LDR */
+ regs->uregs[rt] = base[index];
+ else /* STR */
+ base[index] = regs->uregs[rt];
+}
+
+static void __kprobes
+t16_simulate_reladr(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long base = (insn & 0x800) ? regs->ARM_sp
+ : (thumb_probe_pc(p) & ~3);
+ long offset = insn & 0xff;
+ int rt = (insn >> 8) & 0x7;
+ regs->uregs[rt] = base + offset * 4;
+}
+
+static void __kprobes
+t16_simulate_add_sp_imm(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ long imm = insn & 0x7f;
+ if (insn & 0x80) /* SUB */
+ regs->ARM_sp -= imm * 4;
+ else /* ADD */
+ regs->ARM_sp += imm * 4;
+}
+
+static void __kprobes
+t16_simulate_cbz(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ int rn = insn & 0x7;
+ kprobe_opcode_t nonzero = regs->uregs[rn] ? insn : ~insn;
+ if (nonzero & 0x800) {
+ long i = insn & 0x200;
+ long imm5 = insn & 0xf8;
+ unsigned long pc = thumb_probe_pc(p);
+ regs->ARM_pc = pc + (i >> 3) + (imm5 >> 2);
+ }
+}
+
+static void __kprobes
+t16_simulate_it(struct kprobe *p, struct pt_regs *regs)
+{
+ /*
+ * The 8 IT state bits are split into two parts in CPSR:
+ * ITSTATE<1:0> are in CPSR<26:25>
+ * ITSTATE<7:2> are in CPSR<15:10>
+ * The new IT state is in the lower byte of insn.
+ */
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long cpsr = regs->ARM_cpsr;
+ cpsr &= ~PSR_IT_MASK;
+ cpsr |= (insn & 0xfc) << 8;
+ cpsr |= (insn & 0x03) << 25;
+ regs->ARM_cpsr = cpsr;
+}
+
+static void __kprobes
+t16_singlestep_it(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_pc += 2;
+ t16_simulate_it(p, regs);
+}
+
+static enum kprobe_insn __kprobes
+t16_decode_it(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn_singlestep = t16_singlestep_it;
+ return INSN_GOOD_NO_SLOT;
+}
+
+static void __kprobes
+t16_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ long offset = insn & 0x7f;
+ offset -= insn & 0x80; /* Apply sign bit */
+ regs->ARM_pc = pc + (offset * 2);
+}
+
+static enum kprobe_insn __kprobes
+t16_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ int cc = (insn >> 8) & 0xf;
+ asi->insn_check_cc = kprobe_condition_checks[cc];
+ asi->insn_handler = t16_simulate_cond_branch;
+ return INSN_GOOD_NO_SLOT;
+}
+
+static void __kprobes
+t16_simulate_branch(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ long offset = insn & 0x3ff;
+ offset -= insn & 0x400; /* Apply sign bit */
+ regs->ARM_pc = pc + (offset * 2);
+}
+
+static unsigned long __kprobes
+t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long oldcpsr = regs->ARM_cpsr;
+ unsigned long newcpsr;
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[oldcpsr] \n\t"
+ "ldmia %[regs], {r0-r7} \n\t"
+ "blx %[fn] \n\t"
+ "stmia %[regs], {r0-r7} \n\t"
+ "mrs %[newcpsr], cpsr \n\t"
+ : [newcpsr] "=r" (newcpsr)
+ : [oldcpsr] "r" (oldcpsr), [regs] "r" (regs),
+ [fn] "r" (p->ainsn.insn_fn)
+ : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
+ "lr", "memory", "cc"
+ );
+
+ return (oldcpsr & ~APSR_MASK) | (newcpsr & APSR_MASK);
+}
+
+static void __kprobes
+t16_emulate_loregs_rwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_cpsr = t16_emulate_loregs(p, regs);
+}
+
+static void __kprobes
+t16_emulate_loregs_noitrwflags(struct kprobe *p, struct pt_regs *regs)
+{
+ unsigned long cpsr = t16_emulate_loregs(p, regs);
+ if (!in_it_block(cpsr))
+ regs->ARM_cpsr = cpsr;
+}
+
+static void __kprobes
+t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs)
+{
+ kprobe_opcode_t insn = p->opcode;
+ unsigned long pc = thumb_probe_pc(p);
+ int rdn = (insn & 0x7) | ((insn & 0x80) >> 4);
+ int rm = (insn >> 3) & 0xf;
+
+ register unsigned long rdnv asm("r1");
+ register unsigned long rmv asm("r0");
+ unsigned long cpsr = regs->ARM_cpsr;
+
+ rdnv = (rdn == 15) ? pc : regs->uregs[rdn];
+ rmv = (rm == 15) ? pc : regs->uregs[rm];
+
+ __asm__ __volatile__ (
+ "msr cpsr_fs, %[cpsr] \n\t"
+ "blx %[fn] \n\t"
+ "mrs %[cpsr], cpsr \n\t"
+ : "=r" (rdnv), [cpsr] "=r" (cpsr)
+ : "0" (rdnv), "r" (rmv), "1" (cpsr), [fn] "r" (p->ainsn.insn_fn)
+ : "lr", "memory", "cc"
+ );
+
+ if (rdn == 15)
+ rdnv &= ~1;
+
+ regs->uregs[rdn] = rdnv;
+ regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK);
+}
+
+static enum kprobe_insn __kprobes
+t16_decode_hiregs(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ insn &= ~0x00ff;
+ insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */
+ ((u16 *)asi->insn)[0] = insn;
+ asi->insn_handler = t16_emulate_hiregs;
+ return INSN_GOOD;
+}
+
+static void __kprobes
+t16_emulate_push(struct kprobe *p, struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ "ldr r9, [%[regs], #13*4] \n\t"
+ "ldr r8, [%[regs], #14*4] \n\t"
+ "ldmia %[regs], {r0-r7} \n\t"
+ "blx %[fn] \n\t"
+ "str r9, [%[regs], #13*4] \n\t"
+ :
+ : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+ : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9",
+ "lr", "memory", "cc"
+ );
+}
+
+static enum kprobe_insn __kprobes
+t16_decode_push(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * To simulate a PUSH we use a Thumb-2 "STMDB R9!, {registers}"
+ * and call it with R9=SP and LR in the register list represented
+ * by R8.
+ */
+ ((u16 *)asi->insn)[0] = 0xe929; /* 1st half STMDB R9!,{} */
+ ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */
+ asi->insn_handler = t16_emulate_push;
+ return INSN_GOOD;
+}
+
+static void __kprobes
+t16_emulate_pop_nopc(struct kprobe *p, struct pt_regs *regs)
+{
+ __asm__ __volatile__ (
+ "ldr r9, [%[regs], #13*4] \n\t"
+ "ldmia %[regs], {r0-r7} \n\t"
+ "blx %[fn] \n\t"
+ "stmia %[regs], {r0-r7} \n\t"
+ "str r9, [%[regs], #13*4] \n\t"
+ :
+ : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+ : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+ "lr", "memory", "cc"
+ );
+}
+
+static void __kprobes
+t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs)
+{
+ register unsigned long pc asm("r8");
+
+ __asm__ __volatile__ (
+ "ldr r9, [%[regs], #13*4] \n\t"
+ "ldmia %[regs], {r0-r7} \n\t"
+ "blx %[fn] \n\t"
+ "stmia %[regs], {r0-r7} \n\t"
+ "str r9, [%[regs], #13*4] \n\t"
+ : "=r" (pc)
+ : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn)
+ : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9",
+ "lr", "memory", "cc"
+ );
+
+ bx_write_pc(pc, regs);
+}
+
+static enum kprobe_insn __kprobes
+t16_decode_pop(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ /*
+ * To simulate a POP we use a Thumb-2 "LDMDB R9!, {registers}"
+ * and call it with R9=SP and PC in the register list represented
+ * by R8.
+ */
+ ((u16 *)asi->insn)[0] = 0xe8b9; /* 1st half LDMIA R9!,{} */
+ ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */
+ asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc
+ : t16_emulate_pop_nopc;
+ return INSN_GOOD;
+}
+
+static const union decode_item t16_table_1011[] = {
+ /* Miscellaneous 16-bit instructions */
+
+ /* ADD (SP plus immediate) 1011 0000 0xxx xxxx */
+ /* SUB (SP minus immediate) 1011 0000 1xxx xxxx */
+ DECODE_SIMULATE (0xff00, 0xb000, t16_simulate_add_sp_imm),
+
+ /* CBZ 1011 00x1 xxxx xxxx */
+ /* CBNZ 1011 10x1 xxxx xxxx */
+ DECODE_SIMULATE (0xf500, 0xb100, t16_simulate_cbz),
+
+ /* SXTH 1011 0010 00xx xxxx */
+ /* SXTB 1011 0010 01xx xxxx */
+ /* UXTH 1011 0010 10xx xxxx */
+ /* UXTB 1011 0010 11xx xxxx */
+ /* REV 1011 1010 00xx xxxx */
+ /* REV16 1011 1010 01xx xxxx */
+ /* ??? 1011 1010 10xx xxxx */
+ /* REVSH 1011 1010 11xx xxxx */
+ DECODE_REJECT (0xffc0, 0xba80),
+ DECODE_EMULATE (0xf500, 0xb000, t16_emulate_loregs_rwflags),
+
+ /* PUSH 1011 010x xxxx xxxx */
+ DECODE_CUSTOM (0xfe00, 0xb400, t16_decode_push),
+ /* POP 1011 110x xxxx xxxx */
+ DECODE_CUSTOM (0xfe00, 0xbc00, t16_decode_pop),
+
+ /*
+ * If-Then, and hints
+ * 1011 1111 xxxx xxxx
+ */
+
+ /* YIELD 1011 1111 0001 0000 */
+ DECODE_OR (0xffff, 0xbf10),
+ /* SEV 1011 1111 0100 0000 */
+ DECODE_EMULATE (0xffff, 0xbf40, kprobe_emulate_none),
+ /* NOP 1011 1111 0000 0000 */
+ /* WFE 1011 1111 0010 0000 */
+ /* WFI 1011 1111 0011 0000 */
+ DECODE_SIMULATE (0xffcf, 0xbf00, kprobe_simulate_nop),
+ /* Unassigned hints 1011 1111 xxxx 0000 */
+ DECODE_REJECT (0xff0f, 0xbf00),
+ /* IT 1011 1111 xxxx xxxx */
+ DECODE_CUSTOM (0xff00, 0xbf00, t16_decode_it),
+
+ /* SETEND 1011 0110 010x xxxx */
+ /* CPS 1011 0110 011x xxxx */
+ /* BKPT 1011 1110 xxxx xxxx */
+ /* And unallocated instructions... */
+ DECODE_END
+};
+
+const union decode_item kprobe_decode_thumb16_table[] = {
+
+ /*
+ * Shift (immediate), add, subtract, move, and compare
+ * 00xx xxxx xxxx xxxx
+ */
+
+ /* CMP (immediate) 0010 1xxx xxxx xxxx */
+ DECODE_EMULATE (0xf800, 0x2800, t16_emulate_loregs_rwflags),
+
+ /* ADD (register) 0001 100x xxxx xxxx */
+ /* SUB (register) 0001 101x xxxx xxxx */
+ /* LSL (immediate) 0000 0xxx xxxx xxxx */
+ /* LSR (immediate) 0000 1xxx xxxx xxxx */
+ /* ASR (immediate) 0001 0xxx xxxx xxxx */
+ /* ADD (immediate, Thumb) 0001 110x xxxx xxxx */
+ /* SUB (immediate, Thumb) 0001 111x xxxx xxxx */
+ /* MOV (immediate) 0010 0xxx xxxx xxxx */
+ /* ADD (immediate, Thumb) 0011 0xxx xxxx xxxx */
+ /* SUB (immediate, Thumb) 0011 1xxx xxxx xxxx */
+ DECODE_EMULATE (0xc000, 0x0000, t16_emulate_loregs_noitrwflags),
+
+ /*
+ * 16-bit Thumb data-processing instructions
+ * 0100 00xx xxxx xxxx
+ */
+
+ /* TST (register) 0100 0010 00xx xxxx */
+ DECODE_EMULATE (0xffc0, 0x4200, t16_emulate_loregs_rwflags),
+ /* CMP (register) 0100 0010 10xx xxxx */
+ /* CMN (register) 0100 0010 11xx xxxx */
+ DECODE_EMULATE (0xff80, 0x4280, t16_emulate_loregs_rwflags),
+ /* AND (register) 0100 0000 00xx xxxx */
+ /* EOR (register) 0100 0000 01xx xxxx */
+ /* LSL (register) 0100 0000 10xx xxxx */
+ /* LSR (register) 0100 0000 11xx xxxx */
+ /* ASR (register) 0100 0001 00xx xxxx */
+ /* ADC (register) 0100 0001 01xx xxxx */
+ /* SBC (register) 0100 0001 10xx xxxx */
+ /* ROR (register) 0100 0001 11xx xxxx */
+ /* RSB (immediate) 0100 0010 01xx xxxx */
+ /* ORR (register) 0100 0011 00xx xxxx */
+ /* MUL 0100 0011 00xx xxxx */
+ /* BIC (register) 0100 0011 10xx xxxx */
+ /* MVN (register) 0100 0011 10xx xxxx */
+ DECODE_EMULATE (0xfc00, 0x4000, t16_emulate_loregs_noitrwflags),
+
+ /*
+ * Special data instructions and branch and exchange
+ * 0100 01xx xxxx xxxx
+ */
+
+ /* BLX pc 0100 0111 1111 1xxx */
+ DECODE_REJECT (0xfff8, 0x47f8),
+
+ /* BX (register) 0100 0111 0xxx xxxx */
+ /* BLX (register) 0100 0111 1xxx xxxx */
+ DECODE_SIMULATE (0xff00, 0x4700, t16_simulate_bxblx),
+
+ /* ADD pc, pc 0100 0100 1111 1111 */
+ DECODE_REJECT (0xffff, 0x44ff),
+
+ /* ADD (register) 0100 0100 xxxx xxxx */
+ /* CMP (register) 0100 0101 xxxx xxxx */
+ /* MOV (register) 0100 0110 xxxx xxxx */
+ DECODE_CUSTOM (0xfc00, 0x4400, t16_decode_hiregs),
+
+ /*
+ * Load from Literal Pool
+ * LDR (literal) 0100 1xxx xxxx xxxx
+ */
+ DECODE_SIMULATE (0xf800, 0x4800, t16_simulate_ldr_literal),
+
+ /*
+ * 16-bit Thumb Load/store instructions
+ * 0101 xxxx xxxx xxxx
+ * 011x xxxx xxxx xxxx
+ * 100x xxxx xxxx xxxx
+ */
+
+ /* STR (register) 0101 000x xxxx xxxx */
+ /* STRH (register) 0101 001x xxxx xxxx */
+ /* STRB (register) 0101 010x xxxx xxxx */
+ /* LDRSB (register) 0101 011x xxxx xxxx */
+ /* LDR (register) 0101 100x xxxx xxxx */
+ /* LDRH (register) 0101 101x xxxx xxxx */
+ /* LDRB (register) 0101 110x xxxx xxxx */
+ /* LDRSH (register) 0101 111x xxxx xxxx */
+ /* STR (immediate, Thumb) 0110 0xxx xxxx xxxx */
+ /* LDR (immediate, Thumb) 0110 1xxx xxxx xxxx */
+ /* STRB (immediate, Thumb) 0111 0xxx xxxx xxxx */
+ /* LDRB (immediate, Thumb) 0111 1xxx xxxx xxxx */
+ DECODE_EMULATE (0xc000, 0x4000, t16_emulate_loregs_rwflags),
+ /* STRH (immediate, Thumb) 1000 0xxx xxxx xxxx */
+ /* LDRH (immediate, Thumb) 1000 1xxx xxxx xxxx */
+ DECODE_EMULATE (0xf000, 0x8000, t16_emulate_loregs_rwflags),
+ /* STR (immediate, Thumb) 1001 0xxx xxxx xxxx */
+ /* LDR (immediate, Thumb) 1001 1xxx xxxx xxxx */
+ DECODE_SIMULATE (0xf000, 0x9000, t16_simulate_ldrstr_sp_relative),
+
+ /*
+ * Generate PC-/SP-relative address
+ * ADR (literal) 1010 0xxx xxxx xxxx
+ * ADD (SP plus immediate) 1010 1xxx xxxx xxxx
+ */
+ DECODE_SIMULATE (0xf000, 0xa000, t16_simulate_reladr),
+
+ /*
+ * Miscellaneous 16-bit instructions
+ * 1011 xxxx xxxx xxxx
+ */
+ DECODE_TABLE (0xf000, 0xb000, t16_table_1011),
+
+ /* STM 1100 0xxx xxxx xxxx */
+ /* LDM 1100 1xxx xxxx xxxx */
+ DECODE_EMULATE (0xf000, 0xc000, t16_emulate_loregs_rwflags),
+
+ /*
+ * Conditional branch, and Supervisor Call
+ */
+
+ /* Permanently UNDEFINED 1101 1110 xxxx xxxx */
+ /* SVC 1101 1111 xxxx xxxx */
+ DECODE_REJECT (0xfe00, 0xde00),
+
+ /* Conditional branch 1101 xxxx xxxx xxxx */
+ DECODE_CUSTOM (0xf000, 0xd000, t16_decode_cond_branch),
+
+ /*
+ * Unconditional branch
+ * B 1110 0xxx xxxx xxxx
+ */
+ DECODE_SIMULATE (0xf800, 0xe000, t16_simulate_branch),
+
+ DECODE_END
+};
+
+static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
+{
+ if (unlikely(in_it_block(cpsr)))
+ return kprobe_condition_checks[current_cond(cpsr)](cpsr);
+ return true;
+}
+
+static void __kprobes thumb16_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_pc += 2;
+ p->ainsn.insn_handler(p, regs);
+ regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+}
+
+static void __kprobes thumb32_singlestep(struct kprobe *p, struct pt_regs *regs)
+{
+ regs->ARM_pc += 4;
+ p->ainsn.insn_handler(p, regs);
+ regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+}
+
+enum kprobe_insn __kprobes
+thumb16_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn_singlestep = thumb16_singlestep;
+ asi->insn_check_cc = thumb_check_cc;
+ return kprobe_decode_insn(insn, asi, kprobe_decode_thumb16_table, true);
+}
+
+enum kprobe_insn __kprobes
+thumb32_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi)
+{
+ asi->insn_singlestep = thumb32_singlestep;
+ asi->insn_check_cc = thumb_check_cc;
+ return kprobe_decode_insn(insn, asi, kprobe_decode_thumb32_table, true);
+}
#include <asm/traps.h>
#include <asm/cacheflush.h>
+#include "kprobes.h"
+
#define MIN_STACK_SIZE(addr) \
min((unsigned long)MAX_STACK_SIZE, \
(unsigned long)current_thread_info() + THREAD_START_SP - (addr))
-#define flush_insns(addr, cnt) \
+#define flush_insns(addr, size) \
flush_icache_range((unsigned long)(addr), \
(unsigned long)(addr) + \
- sizeof(kprobe_opcode_t) * (cnt))
+ (size))
/* Used as a marker in ARM_pc to note when we're in a jprobe. */
#define JPROBE_MAGIC_ADDR 0xffffffff
kprobe_opcode_t insn;
kprobe_opcode_t tmp_insn[MAX_INSN_SIZE];
unsigned long addr = (unsigned long)p->addr;
+ bool thumb;
+ kprobe_decode_insn_t *decode_insn;
int is;
- if (addr & 0x3 || in_exception_text(addr))
+ if (in_exception_text(addr))
return -EINVAL;
+#ifdef CONFIG_THUMB2_KERNEL
+ thumb = true;
+ addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */
+ insn = ((u16 *)addr)[0];
+ if (is_wide_instruction(insn)) {
+ insn <<= 16;
+ insn |= ((u16 *)addr)[1];
+ decode_insn = thumb32_kprobe_decode_insn;
+ } else
+ decode_insn = thumb16_kprobe_decode_insn;
+#else /* !CONFIG_THUMB2_KERNEL */
+ thumb = false;
+ if (addr & 0x3)
+ return -EINVAL;
insn = *p->addr;
+ decode_insn = arm_kprobe_decode_insn;
+#endif
+
p->opcode = insn;
p->ainsn.insn = tmp_insn;
- switch (arm_kprobe_decode_insn(insn, &p->ainsn)) {
+ switch ((*decode_insn)(insn, &p->ainsn)) {
case INSN_REJECTED: /* not supported */
return -EINVAL;
return -ENOMEM;
for (is = 0; is < MAX_INSN_SIZE; ++is)
p->ainsn.insn[is] = tmp_insn[is];
- flush_insns(p->ainsn.insn, MAX_INSN_SIZE);
+ flush_insns(p->ainsn.insn,
+ sizeof(p->ainsn.insn[0]) * MAX_INSN_SIZE);
+ p->ainsn.insn_fn = (kprobe_insn_fn_t *)
+ ((uintptr_t)p->ainsn.insn | thumb);
break;
case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */
return 0;
}
+#ifdef CONFIG_THUMB2_KERNEL
+
+/*
+ * For a 32-bit Thumb breakpoint spanning two memory words we need to take
+ * special precautions to insert the breakpoint atomically, especially on SMP
+ * systems. This is achieved by calling this arming function using stop_machine.
+ */
+static int __kprobes set_t32_breakpoint(void *addr)
+{
+ ((u16 *)addr)[0] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION >> 16;
+ ((u16 *)addr)[1] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION & 0xffff;
+ flush_insns(addr, 2*sizeof(u16));
+ return 0;
+}
+
+void __kprobes arch_arm_kprobe(struct kprobe *p)
+{
+ uintptr_t addr = (uintptr_t)p->addr & ~1; /* Remove any Thumb flag */
+
+ if (!is_wide_instruction(p->opcode)) {
+ *(u16 *)addr = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION;
+ flush_insns(addr, sizeof(u16));
+ } else if (addr & 2) {
+ /* A 32-bit instruction spanning two words needs special care */
+ stop_machine(set_t32_breakpoint, (void *)addr, &cpu_online_map);
+ } else {
+ /* Word aligned 32-bit instruction can be written atomically */
+ u32 bkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION;
+#ifndef __ARMEB__ /* Swap halfwords for little-endian */
+ bkp = (bkp >> 16) | (bkp << 16);
+#endif
+ *(u32 *)addr = bkp;
+ flush_insns(addr, sizeof(u32));
+ }
+}
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
void __kprobes arch_arm_kprobe(struct kprobe *p)
{
- *p->addr = KPROBE_BREAKPOINT_INSTRUCTION;
- flush_insns(p->addr, 1);
+ kprobe_opcode_t insn = p->opcode;
+ kprobe_opcode_t brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION;
+ if (insn >= 0xe0000000)
+ brkp |= 0xe0000000; /* Unconditional instruction */
+ else
+ brkp |= insn & 0xf0000000; /* Copy condition from insn */
+ *p->addr = brkp;
+ flush_insns(p->addr, sizeof(p->addr[0]));
}
+#endif /* !CONFIG_THUMB2_KERNEL */
+
/*
* The actual disarming is done here on each CPU and synchronized using
* stop_machine. This synchronization is necessary on SMP to avoid removing
* a probe between the moment the 'Undefined Instruction' exception is raised
* and the moment the exception handler reads the faulting instruction from
- * memory.
+ * memory. It is also needed to atomically set the two half-words of a 32-bit
+ * Thumb breakpoint.
*/
int __kprobes __arch_disarm_kprobe(void *p)
{
struct kprobe *kp = p;
+#ifdef CONFIG_THUMB2_KERNEL
+ u16 *addr = (u16 *)((uintptr_t)kp->addr & ~1);
+ kprobe_opcode_t insn = kp->opcode;
+ unsigned int len;
+
+ if (is_wide_instruction(insn)) {
+ ((u16 *)addr)[0] = insn>>16;
+ ((u16 *)addr)[1] = insn;
+ len = 2*sizeof(u16);
+ } else {
+ ((u16 *)addr)[0] = insn;
+ len = sizeof(u16);
+ }
+ flush_insns(addr, len);
+
+#else /* !CONFIG_THUMB2_KERNEL */
*kp->addr = kp->opcode;
- flush_insns(kp->addr, 1);
+ flush_insns(kp->addr, sizeof(kp->addr[0]));
+#endif
return 0;
}
__get_cpu_var(current_kprobe) = p;
}
-static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs,
- struct kprobe_ctlblk *kcb)
+static void __kprobes
+singlestep_skip(struct kprobe *p, struct pt_regs *regs)
{
+#ifdef CONFIG_THUMB2_KERNEL
+ regs->ARM_cpsr = it_advance(regs->ARM_cpsr);
+ if (is_wide_instruction(p->opcode))
+ regs->ARM_pc += 4;
+ else
+ regs->ARM_pc += 2;
+#else
regs->ARM_pc += 4;
- if (p->ainsn.insn_check_cc(regs->ARM_cpsr))
- p->ainsn.insn_handler(p, regs);
+#endif
+}
+
+static inline void __kprobes
+singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb)
+{
+ p->ainsn.insn_singlestep(p, regs);
}
/*
{
struct kprobe *p, *cur;
struct kprobe_ctlblk *kcb;
- kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc;
kcb = get_kprobe_ctlblk();
cur = kprobe_running();
- p = get_kprobe(addr);
+
+#ifdef CONFIG_THUMB2_KERNEL
+ /*
+ * First look for a probe which was registered using an address with
+ * bit 0 set, this is the usual situation for pointers to Thumb code.
+ * If not found, fallback to looking for one with bit 0 clear.
+ */
+ p = get_kprobe((kprobe_opcode_t *)(regs->ARM_pc | 1));
+ if (!p)
+ p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc);
+
+#else /* ! CONFIG_THUMB2_KERNEL */
+ p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc);
+#endif
if (p) {
if (cur) {
/* impossible cases */
BUG();
}
- } else {
+ } else if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) {
+ /* Probe hit and conditional execution check ok. */
set_current_kprobe(p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
}
reset_current_kprobe();
}
+ } else {
+ /*
+ * Probe hit but conditional execution check failed,
+ * so just skip the instruction and continue as if
+ * nothing had happened.
+ */
+ singlestep_skip(p, regs);
}
} else if (cur) {
/* We probably hit a jprobe. Call its break handler. */
"bl trampoline_handler \n\t"
"mov lr, r0 \n\t"
"ldmia sp!, {r0 - r11} \n\t"
+#ifdef CONFIG_THUMB2_KERNEL
+ "bx lr \n\t"
+#else
"mov pc, lr \n\t"
+#endif
: : : "memory");
}
struct jprobe *jp = container_of(p, struct jprobe, kp);
struct kprobe_ctlblk *kcb = get_kprobe_ctlblk();
long sp_addr = regs->ARM_sp;
+ long cpsr;
kcb->jprobe_saved_regs = *regs;
memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr));
regs->ARM_pc = (long)jp->entry;
- regs->ARM_cpsr |= PSR_I_BIT;
+
+ cpsr = regs->ARM_cpsr | PSR_I_BIT;
+#ifdef CONFIG_THUMB2_KERNEL
+ /* Set correct Thumb state in cpsr */
+ if (regs->ARM_pc & 1)
+ cpsr |= PSR_T_BIT;
+ else
+ cpsr &= ~PSR_T_BIT;
+#endif
+ regs->ARM_cpsr = cpsr;
+
preempt_disable();
return 1;
}
* This is to prevent any simulated instruction from writing
* over the regs when they are accessing the stack.
*/
+#ifdef CONFIG_THUMB2_KERNEL
+ "sub r0, %0, %1 \n\t"
+ "mov sp, r0 \n\t"
+#else
"sub sp, %0, %1 \n\t"
+#endif
"ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t"
"str %0, [sp, %2] \n\t"
"str r0, [sp, %3] \n\t"
* Return to the context saved by setjmp_pre_handler
* and restored by longjmp_break_handler.
*/
+#ifdef CONFIG_THUMB2_KERNEL
+ "ldr lr, [sp, %2] \n\t" /* lr = saved sp */
+ "ldrd r0, r1, [sp, %5] \n\t" /* r0,r1 = saved lr,pc */
+ "ldr r2, [sp, %4] \n\t" /* r2 = saved psr */
+ "stmdb lr!, {r0, r1, r2} \n\t" /* push saved lr and */
+ /* rfe context */
+ "ldmia sp, {r0 - r12} \n\t"
+ "mov sp, lr \n\t"
+ "ldr lr, [sp], #4 \n\t"
+ "rfeia sp! \n\t"
+#else
"ldr r0, [sp, %4] \n\t"
"msr cpsr_cxsf, r0 \n\t"
"ldmia sp, {r0 - pc} \n\t"
+#endif
:
: "r" (kcb->jprobe_saved_regs.ARM_sp),
"I" (sizeof(struct pt_regs) * 2),
"J" (offsetof(struct pt_regs, ARM_sp)),
"J" (offsetof(struct pt_regs, ARM_pc)),
- "J" (offsetof(struct pt_regs, ARM_cpsr))
+ "J" (offsetof(struct pt_regs, ARM_cpsr)),
+ "J" (offsetof(struct pt_regs, ARM_lr))
: "memory", "cc");
}
return 0;
}
-static struct undef_hook kprobes_break_hook = {
+#ifdef CONFIG_THUMB2_KERNEL
+
+static struct undef_hook kprobes_thumb16_break_hook = {
+ .instr_mask = 0xffff,
+ .instr_val = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = kprobe_trap_handler,
+};
+
+static struct undef_hook kprobes_thumb32_break_hook = {
.instr_mask = 0xffffffff,
- .instr_val = KPROBE_BREAKPOINT_INSTRUCTION,
+ .instr_val = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION,
.cpsr_mask = MODE_MASK,
.cpsr_val = SVC_MODE,
.fn = kprobe_trap_handler,
};
+#else /* !CONFIG_THUMB2_KERNEL */
+
+static struct undef_hook kprobes_arm_break_hook = {
+ .instr_mask = 0x0fffffff,
+ .instr_val = KPROBE_ARM_BREAKPOINT_INSTRUCTION,
+ .cpsr_mask = MODE_MASK,
+ .cpsr_val = SVC_MODE,
+ .fn = kprobe_trap_handler,
+};
+
+#endif /* !CONFIG_THUMB2_KERNEL */
+
int __init arch_init_kprobes()
{
arm_kprobe_decode_init();
- register_undef_hook(&kprobes_break_hook);
+#ifdef CONFIG_THUMB2_KERNEL
+ register_undef_hook(&kprobes_thumb16_break_hook);
+ register_undef_hook(&kprobes_thumb32_break_hook);
+#else
+ register_undef_hook(&kprobes_arm_break_hook);
+#endif
return 0;
}
--- /dev/null
+/*
+ * arch/arm/kernel/kprobes.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * Some contents moved here from arch/arm/include/asm/kprobes.h which is
+ * Copyright (C) 2006, 2007 Motorola Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#ifndef _ARM_KERNEL_KPROBES_H
+#define _ARM_KERNEL_KPROBES_H
+
+/*
+ * These undefined instructions must be unique and
+ * reserved solely for kprobes' use.
+ */
+#define KPROBE_ARM_BREAKPOINT_INSTRUCTION 0x07f001f8
+#define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION 0xde18
+#define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION 0xf7f0a018
+
+
+enum kprobe_insn {
+ INSN_REJECTED,
+ INSN_GOOD,
+ INSN_GOOD_NO_SLOT
+};
+
+typedef enum kprobe_insn (kprobe_decode_insn_t)(kprobe_opcode_t,
+ struct arch_specific_insn *);
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+enum kprobe_insn thumb16_kprobe_decode_insn(kprobe_opcode_t,
+ struct arch_specific_insn *);
+enum kprobe_insn thumb32_kprobe_decode_insn(kprobe_opcode_t,
+ struct arch_specific_insn *);
+
+#else /* !CONFIG_THUMB2_KERNEL */
+
+enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t,
+ struct arch_specific_insn *);
+#endif
+
+void __init arm_kprobe_decode_init(void);
+
+extern kprobe_check_cc * const kprobe_condition_checks[16];
+
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+/* str_pc_offset is architecturally defined from ARMv7 onwards */
+#define str_pc_offset 8
+#define find_str_pc_offset()
+
+#else /* __LINUX_ARM_ARCH__ < 7 */
+
+/* We need a run-time check to determine str_pc_offset */
+extern int str_pc_offset;
+void __init find_str_pc_offset(void);
+
+#endif
+
+
+/*
+ * Update ITSTATE after normal execution of an IT block instruction.
+ *
+ * The 8 IT state bits are split into two parts in CPSR:
+ * ITSTATE<1:0> are in CPSR<26:25>
+ * ITSTATE<7:2> are in CPSR<15:10>
+ */
+static inline unsigned long it_advance(unsigned long cpsr)
+ {
+ if ((cpsr & 0x06000400) == 0) {
+ /* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */
+ cpsr &= ~PSR_IT_MASK;
+ } else {
+ /* We need to shift left ITSTATE<4:0> */
+ const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */
+ unsigned long it = cpsr & mask;
+ it <<= 1;
+ it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */
+ it &= mask;
+ cpsr &= ~mask;
+ cpsr |= it;
+ }
+ return cpsr;
+}
+
+static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs)
+{
+ long cpsr = regs->ARM_cpsr;
+ if (pcv & 0x1) {
+ cpsr |= PSR_T_BIT;
+ pcv &= ~0x1;
+ } else {
+ cpsr &= ~PSR_T_BIT;
+ pcv &= ~0x2; /* Avoid UNPREDICTABLE address allignment */
+ }
+ regs->ARM_cpsr = cpsr;
+ regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 6
+
+/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */
+#define load_write_pc_interworks true
+#define test_load_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ < 6 */
+
+/* We need run-time testing to determine if load_write_pc() should interwork. */
+extern bool load_write_pc_interworks;
+void __init test_load_write_pc_interworking(void);
+
+#endif
+
+static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs)
+{
+ if (load_write_pc_interworks)
+ bx_write_pc(pcv, regs);
+ else
+ regs->ARM_pc = pcv;
+}
+
+
+#if __LINUX_ARM_ARCH__ >= 7
+
+#define alu_write_pc_interworks true
+#define test_alu_write_pc_interworking()
+
+#elif __LINUX_ARM_ARCH__ <= 5
+
+/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */
+#define alu_write_pc_interworks false
+#define test_alu_write_pc_interworking()
+
+#else /* __LINUX_ARM_ARCH__ == 6 */
+
+/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */
+extern bool alu_write_pc_interworks;
+void __init test_alu_write_pc_interworking(void);
+
+#endif /* __LINUX_ARM_ARCH__ == 6 */
+
+static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs)
+{
+ if (alu_write_pc_interworks)
+ bx_write_pc(pcv, regs);
+ else
+ regs->ARM_pc = pcv;
+}
+
+
+void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs);
+void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs);
+
+enum kprobe_insn __kprobes
+kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi);
+
+/*
+ * Test if load/store instructions writeback the address register.
+ * if P (bit 24) == 0 or W (bit 21) == 1
+ */
+#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000)
+
+/*
+ * The following definitions and macros are used to build instruction
+ * decoding tables for use by kprobe_decode_insn.
+ *
+ * These tables are a concatenation of entries each of which consist of one of
+ * the decode_* structs. All of the fields in every type of decode structure
+ * are of the union type decode_item, therefore the entire decode table can be
+ * viewed as an array of these and declared like:
+ *
+ * static const union decode_item table_name[] = {};
+ *
+ * In order to construct each entry in the table, macros are used to
+ * initialise a number of sequential decode_item values in a layout which
+ * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct
+ * decode_simulate by initialising four decode_item objects like this...
+ *
+ * {.bits = _type},
+ * {.bits = _mask},
+ * {.bits = _value},
+ * {.handler = _handler},
+ *
+ * Initialising a specified member of the union means that the compiler
+ * will produce a warning if the argument is of an incorrect type.
+ *
+ * Below is a list of each of the macros used to initialise entries and a
+ * description of the action performed when that entry is matched to an
+ * instruction. A match is found when (instruction & mask) == value.
+ *
+ * DECODE_TABLE(mask, value, table)
+ * Instruction decoding jumps to parsing the new sub-table 'table'.
+ *
+ * DECODE_CUSTOM(mask, value, decoder)
+ * The custom function 'decoder' is called to the complete decoding
+ * of an instruction.
+ *
+ * DECODE_SIMULATE(mask, value, handler)
+ * Set the probes instruction handler to 'handler', this will be used
+ * to simulate the instruction when the probe is hit. Decoding returns
+ * with INSN_GOOD_NO_SLOT.
+ *
+ * DECODE_EMULATE(mask, value, handler)
+ * Set the probes instruction handler to 'handler', this will be used
+ * to emulate the instruction when the probe is hit. The modified
+ * instruction (see below) is placed in the probes instruction slot so it
+ * may be called by the emulation code. Decoding returns with INSN_GOOD.
+ *
+ * DECODE_REJECT(mask, value)
+ * Instruction decoding fails with INSN_REJECTED
+ *
+ * DECODE_OR(mask, value)
+ * This allows the mask/value test of multiple table entries to be
+ * logically ORed. Once an 'or' entry is matched the decoding action to
+ * be performed is that of the next entry which isn't an 'or'. E.g.
+ *
+ * DECODE_OR (mask1, value1)
+ * DECODE_OR (mask2, value2)
+ * DECODE_SIMULATE (mask3, value3, simulation_handler)
+ *
+ * This means that if any of the three mask/value pairs match the
+ * instruction being decoded, then 'simulation_handler' will be used
+ * for it.
+ *
+ * Both the SIMULATE and EMULATE macros have a second form which take an
+ * additional 'regs' argument.
+ *
+ * DECODE_SIMULATEX(mask, value, handler, regs)
+ * DECODE_EMULATEX (mask, value, handler, regs)
+ *
+ * These are used to specify what kind of CPU register is encoded in each of the
+ * least significant 5 nibbles of the instruction being decoded. The regs value
+ * is specified using the REGS macro, this takes any of the REG_TYPE_* values
+ * from enum decode_reg_type as arguments; only the '*' part of the name is
+ * given. E.g.
+ *
+ * REGS(0, ANY, NOPC, 0, ANY)
+ *
+ * This indicates an instruction is encoded like:
+ *
+ * bits 19..16 ignore
+ * bits 15..12 any register allowed here
+ * bits 11.. 8 any register except PC allowed here
+ * bits 7.. 4 ignore
+ * bits 3.. 0 any register allowed here
+ *
+ * This register specification is checked after a decode table entry is found to
+ * match an instruction (through the mask/value test). Any invalid register then
+ * found in the instruction will cause decoding to fail with INSN_REJECTED. In
+ * the above example this would happen if bits 11..8 of the instruction were
+ * 1111, indicating R15 or PC.
+ *
+ * As well as checking for legal combinations of registers, this data is also
+ * used to modify the registers encoded in the instructions so that an
+ * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.)
+ *
+ * Here is a real example which matches ARM instructions of the form
+ * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>"
+ *
+ * DECODE_EMULATEX (0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags,
+ * REGS(ANY, ANY, NOPC, 0, ANY)),
+ * ^ ^ ^ ^
+ * Rn Rd Rs Rm
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because
+ * Rs == R15
+ *
+ * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the
+ * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into
+ * the kprobes instruction slot. This can then be called later by the handler
+ * function emulate_rd12rn16rm0rs8_rwflags in order to simulate the instruction.
+ */
+
+enum decode_type {
+ DECODE_TYPE_END,
+ DECODE_TYPE_TABLE,
+ DECODE_TYPE_CUSTOM,
+ DECODE_TYPE_SIMULATE,
+ DECODE_TYPE_EMULATE,
+ DECODE_TYPE_OR,
+ DECODE_TYPE_REJECT,
+ NUM_DECODE_TYPES /* Must be last enum */
+};
+
+#define DECODE_TYPE_BITS 4
+#define DECODE_TYPE_MASK ((1 << DECODE_TYPE_BITS) - 1)
+
+enum decode_reg_type {
+ REG_TYPE_NONE = 0, /* Not a register, ignore */
+ REG_TYPE_ANY, /* Any register allowed */
+ REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */
+ REG_TYPE_SP, /* Register must be SP */
+ REG_TYPE_PC, /* Register must be PC */
+ REG_TYPE_NOSP, /* Register must not be SP */
+ REG_TYPE_NOSPPC, /* Register must not be SP or PC */
+ REG_TYPE_NOPC, /* Register must not be PC */
+ REG_TYPE_NOPCWB, /* No PC if load/store write-back flag also set */
+
+ /* The following types are used when the encoding for PC indicates
+ * another instruction form. This distiction only matters for test
+ * case coverage checks.
+ */
+ REG_TYPE_NOPCX, /* Register must not be PC */
+ REG_TYPE_NOSPPCX, /* Register must not be SP or PC */
+
+ /* Alias to allow '0' arg to be used in REGS macro. */
+ REG_TYPE_0 = REG_TYPE_NONE
+};
+
+#define REGS(r16, r12, r8, r4, r0) \
+ ((REG_TYPE_##r16) << 16) + \
+ ((REG_TYPE_##r12) << 12) + \
+ ((REG_TYPE_##r8) << 8) + \
+ ((REG_TYPE_##r4) << 4) + \
+ (REG_TYPE_##r0)
+
+union decode_item {
+ u32 bits;
+ const union decode_item *table;
+ kprobe_insn_handler_t *handler;
+ kprobe_decode_insn_t *decoder;
+};
+
+
+#define DECODE_END \
+ {.bits = DECODE_TYPE_END}
+
+
+struct decode_header {
+ union decode_item type_regs;
+ union decode_item mask;
+ union decode_item value;
+};
+
+#define DECODE_HEADER(_type, _mask, _value, _regs) \
+ {.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)}, \
+ {.bits = (_mask)}, \
+ {.bits = (_value)}
+
+
+struct decode_table {
+ struct decode_header header;
+ union decode_item table;
+};
+
+#define DECODE_TABLE(_mask, _value, _table) \
+ DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0), \
+ {.table = (_table)}
+
+
+struct decode_custom {
+ struct decode_header header;
+ union decode_item decoder;
+};
+
+#define DECODE_CUSTOM(_mask, _value, _decoder) \
+ DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0), \
+ {.decoder = (_decoder)}
+
+
+struct decode_simulate {
+ struct decode_header header;
+ union decode_item handler;
+};
+
+#define DECODE_SIMULATEX(_mask, _value, _handler, _regs) \
+ DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs), \
+ {.handler = (_handler)}
+
+#define DECODE_SIMULATE(_mask, _value, _handler) \
+ DECODE_SIMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_emulate {
+ struct decode_header header;
+ union decode_item handler;
+};
+
+#define DECODE_EMULATEX(_mask, _value, _handler, _regs) \
+ DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs), \
+ {.handler = (_handler)}
+
+#define DECODE_EMULATE(_mask, _value, _handler) \
+ DECODE_EMULATEX(_mask, _value, _handler, 0)
+
+
+struct decode_or {
+ struct decode_header header;
+};
+
+#define DECODE_OR(_mask, _value) \
+ DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0)
+
+
+struct decode_reject {
+ struct decode_header header;
+};
+
+#define DECODE_REJECT(_mask, _value) \
+ DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+
+
+int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
+ const union decode_item *table, bool thumb16);
+
+
+#endif /* _ARM_KERNEL_KPROBES_H */
if (irq >= 0)
free_irq(irq, NULL);
}
- release_pmu(pmu_device);
+ release_pmu(ARM_PMU_DEVICE_CPU);
pmu_device = NULL;
}
}
armpmu->stop();
- release_pmu(pmu_device);
+ release_pmu(ARM_PMU_DEVICE_CPU);
pmu_device = NULL;
}
case 0xC090: /* Cortex-A9 */
armpmu = armv7_a9_pmu_init();
break;
+ case 0xC050: /* Cortex-A5 */
+ armpmu = armv7_a5_pmu_init();
+ break;
+ case 0xC0F0: /* Cortex-A15 */
+ armpmu = armv7_a15_pmu_init();
+ break;
}
/* Intel CPUs [xscale]. */
} else if (0x69 == implementor) {
*/
#ifdef CONFIG_CPU_V7
-/* Common ARMv7 event types */
+/*
+ * Common ARMv7 event types
+ *
+ * Note: An implementation may not be able to count all of these events
+ * but the encodings are considered to be `reserved' in the case that
+ * they are not available.
+ */
enum armv7_perf_types {
ARMV7_PERFCTR_PMNC_SW_INCR = 0x00,
ARMV7_PERFCTR_IFETCH_MISS = 0x01,
ARMV7_PERFCTR_ITLB_MISS = 0x02,
- ARMV7_PERFCTR_DCACHE_REFILL = 0x03,
- ARMV7_PERFCTR_DCACHE_ACCESS = 0x04,
+ ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */
+ ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */
ARMV7_PERFCTR_DTLB_REFILL = 0x05,
ARMV7_PERFCTR_DREAD = 0x06,
ARMV7_PERFCTR_DWRITE = 0x07,
-
+ ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
ARMV7_PERFCTR_EXC_TAKEN = 0x09,
ARMV7_PERFCTR_EXC_EXECUTED = 0x0A,
ARMV7_PERFCTR_CID_WRITE = 0x0B,
*/
ARMV7_PERFCTR_PC_WRITE = 0x0C,
ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D,
+ ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F,
+
+ /* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */
ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10,
ARMV7_PERFCTR_CLOCK_CYCLES = 0x11,
-
- ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12,
+ ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12,
+ ARMV7_PERFCTR_MEM_ACCESS = 0x13,
+ ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14,
+ ARMV7_PERFCTR_L1_DCACHE_WB = 0x15,
+ ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16,
+ ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17,
+ ARMV7_PERFCTR_L2_DCACHE_WB = 0x18,
+ ARMV7_PERFCTR_BUS_ACCESS = 0x19,
+ ARMV7_PERFCTR_MEMORY_ERROR = 0x1A,
+ ARMV7_PERFCTR_INSTR_SPEC = 0x1B,
+ ARMV7_PERFCTR_TTBR_WRITE = 0x1C,
+ ARMV7_PERFCTR_BUS_CYCLES = 0x1D,
ARMV7_PERFCTR_CPU_CYCLES = 0xFF
};
/* ARMv7 Cortex-A8 specific event types */
enum armv7_a8_perf_types {
- ARMV7_PERFCTR_INSTR_EXECUTED = 0x08,
-
- ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E,
-
ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40,
ARMV7_PERFCTR_L2_STORE_MERGED = 0x41,
ARMV7_PERFCTR_L2_STORE_BUFF = 0x42,
ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5
};
+/* ARMv7 Cortex-A5 specific event types */
+enum armv7_a5_perf_types {
+ ARMV7_PERFCTR_IRQ_TAKEN = 0x86,
+ ARMV7_PERFCTR_FIQ_TAKEN = 0x87,
+
+ ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0,
+ ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1,
+ ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2,
+ ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3,
+ ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4,
+ ARMV7_PERFCTR_READ_ALLOC = 0xc5,
+
+ ARMV7_PERFCTR_STALL_SB_FULL = 0xc9,
+};
+
+/* ARMv7 Cortex-A15 specific event types */
+enum armv7_a15_perf_types {
+ ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40,
+ ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41,
+ ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42,
+ ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43,
+
+ ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C,
+ ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D,
+
+ ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50,
+ ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51,
+ ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52,
+ ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53,
+
+ ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76,
+};
+
/*
* Cortex-A8 HW events mapping
*
},
},
[C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
},
[C(DTLB)] = {
- /*
- * Only ITLB misses and DTLB refills are supported.
- * If users want the DTLB refills misses a raw counter
- * must be used.
- */
[C(OP_READ)] = {
[C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
[C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
},
};
+/*
+ * Cortex-A5 HW events mapping
+ */
+static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED,
+};
+
+static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_DCACHE_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_DCACHE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ },
+ },
+ [C(L1I)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ /*
+ * The prefetch counters don't differentiate between the I
+ * side and the D side.
+ */
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_PREFETCH_LINEFILL,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
+/*
+ * Cortex-A15 HW events mapping
+ */
+static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = {
+ [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES,
+ [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED,
+ [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED,
+ [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE,
+ [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES,
+};
+
+static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX] = {
+ [C(L1D)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(L1I)] = {
+ /*
+ * Not all performance counters differentiate between read
+ * and write accesses/misses so we're not always strictly
+ * correct, but it's the best we can do. Writes and reads get
+ * combined in these cases.
+ */
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(LL)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)]
+ = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(DTLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L1_DTLB_READ_REFILL,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(ITLB)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+ [C(BPU)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED,
+ [C(RESULT_MISS)]
+ = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
+};
+
/*
* Perf Events counters
*/
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
+
+static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA5;
+ armv7pmu.name = "ARMv7 Cortex-A5";
+ armv7pmu.cache_map = &armv7_a5_perf_cache_map;
+ armv7pmu.event_map = &armv7_a5_perf_map;
+ armv7pmu.num_events = armv7_read_num_pmnc_events();
+ return &armv7pmu;
+}
+
+static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+{
+ armv7pmu.id = ARM_PERF_PMU_ID_CA15;
+ armv7pmu.name = "ARMv7 Cortex-A15";
+ armv7pmu.cache_map = &armv7_a15_perf_cache_map;
+ armv7pmu.event_map = &armv7_a15_perf_map;
+ armv7pmu.num_events = armv7_read_num_pmnc_events();
+ return &armv7pmu;
+}
#else
static const struct arm_pmu *__init armv7_a8_pmu_init(void)
{
{
return NULL;
}
+
+static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+{
+ return NULL;
+}
+
+static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+{
+ return NULL;
+}
#endif /* CONFIG_CPU_V7 */
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <asm/pmu.h>
static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-static int __devinit pmu_device_probe(struct platform_device *pdev)
+static int __devinit pmu_register(struct platform_device *pdev,
+ enum arm_pmu_type type)
{
-
- if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) {
+ if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
pr_warning("received registration request for unknown "
- "device %d\n", pdev->id);
+ "device %d\n", type);
return -EINVAL;
}
- if (pmu_devices[pdev->id])
- pr_warning("registering new PMU device type %d overwrites "
- "previous registration!\n", pdev->id);
- else
- pr_info("registered new PMU device of type %d\n",
- pdev->id);
+ if (pmu_devices[type]) {
+ pr_warning("rejecting duplicate registration of PMU device "
+ "type %d.", type);
+ return -ENOSPC;
+ }
- pmu_devices[pdev->id] = pdev;
+ pr_info("registered new PMU device of type %d\n", type);
+ pmu_devices[type] = pdev;
return 0;
}
-static struct platform_driver pmu_driver = {
+#define OF_MATCH_PMU(_name, _type) { \
+ .compatible = _name, \
+ .data = (void *)_type, \
+}
+
+#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
+
+static struct of_device_id armpmu_of_device_ids[] = {
+ OF_MATCH_CPU("arm,cortex-a9-pmu"),
+ OF_MATCH_CPU("arm,cortex-a8-pmu"),
+ OF_MATCH_CPU("arm,arm1136-pmu"),
+ OF_MATCH_CPU("arm,arm1176-pmu"),
+ {},
+};
+
+#define PLAT_MATCH_PMU(_name, _type) { \
+ .name = _name, \
+ .driver_data = _type, \
+}
+
+#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+ PLAT_MATCH_CPU("arm-pmu"),
+ {},
+};
+
+enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id;
+ const struct platform_device_id *pdev_id;
+
+ /* provided by of_device_id table */
+ if (pdev->dev.of_node) {
+ of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
+ BUG_ON(!of_id);
+ return (enum arm_pmu_type)of_id->data;
+ }
+
+ /* Provided by platform_device_id table */
+ pdev_id = platform_get_device_id(pdev);
+ BUG_ON(!pdev_id);
+ return pdev_id->driver_data;
+}
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+ return pmu_register(pdev, armpmu_device_type(pdev));
+}
+
+static struct platform_driver armpmu_driver = {
.driver = {
.name = "arm-pmu",
+ .of_match_table = armpmu_of_device_ids,
},
- .probe = pmu_device_probe,
+ .probe = armpmu_device_probe,
+ .id_table = armpmu_plat_device_ids,
};
static int __init register_pmu_driver(void)
{
- return platform_driver_register(&pmu_driver);
+ return platform_driver_register(&armpmu_driver);
}
device_initcall(register_pmu_driver);
EXPORT_SYMBOL_GPL(reserve_pmu);
int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type device)
{
- if (WARN_ON(pdev != pmu_devices[pdev->id]))
+ if (WARN_ON(!pmu_devices[device]))
return -EINVAL;
- clear_bit_unlock(pdev->id, &pmu_lock);
+ clear_bit_unlock(device, &pmu_lock);
return 0;
}
EXPORT_SYMBOL_GPL(release_pmu);
.fn = break_trap,
};
-static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr)
-{
- unsigned int instr2;
- void __user *pc;
-
- /* Check the second half of the instruction. */
- pc = (void __user *)(instruction_pointer(regs) + 2);
-
- if (processor_mode(regs) == SVC_MODE) {
- instr2 = *(u16 *) pc;
- } else {
- get_user(instr2, (u16 __user *)pc);
- }
-
- if (instr2 == 0xa000) {
- ptrace_break(current, regs);
- return 0;
- } else {
- return 1;
- }
-}
-
static struct undef_hook thumb2_break_hook = {
- .instr_mask = 0xffff,
- .instr_val = 0xf7f0,
+ .instr_mask = 0xffffffff,
+ .instr_val = 0xf7f0a000,
.cpsr_mask = PSR_T_BIT,
.cpsr_val = PSR_T_BIT,
- .fn = thumb2_break_trap,
+ .fn = break_trap,
};
static int __init ptrace_break_init(void)
elf_hwcap &= ~HWCAP_TLS;
}
-static void __init setup_processor(void)
-{
- struct proc_info_list *list;
-
- /*
- * locate processor in the list of supported processor
- * types. The linker builds this table for us from the
- * entries in arch/arm/mm/proc-*.S
- */
- list = lookup_processor_type(read_cpuid_id());
- if (!list) {
- printk("CPU configuration botched (ID %08x), unable "
- "to continue.\n", read_cpuid_id());
- while (1);
- }
-
- cpu_name = list->cpu_name;
-
-#ifdef MULTI_CPU
- processor = *list->proc;
-#endif
-#ifdef MULTI_TLB
- cpu_tlb = *list->tlb;
-#endif
-#ifdef MULTI_USER
- cpu_user = *list->user;
-#endif
-#ifdef MULTI_CACHE
- cpu_cache = *list->cache;
-#endif
-
- printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
- cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
- proc_arch[cpu_architecture()], cr_alignment);
-
- sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
- sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
- elf_hwcap = list->elf_hwcap;
-#ifndef CONFIG_ARM_THUMB
- elf_hwcap &= ~HWCAP_THUMB;
-#endif
-
- feat_v6_fixup();
-
- cacheid_init();
- cpu_proc_init();
-}
-
/*
* cpu_init - initialise one CPU.
*
BUG();
}
+ cpu_proc_init();
+
/*
* Define the placement constraint for the inline asm directive below.
* In Thumb-2, msr with an immediate value is not allowed.
: "r14");
}
+static void __init setup_processor(void)
+{
+ struct proc_info_list *list;
+
+ /*
+ * locate processor in the list of supported processor
+ * types. The linker builds this table for us from the
+ * entries in arch/arm/mm/proc-*.S
+ */
+ list = lookup_processor_type(read_cpuid_id());
+ if (!list) {
+ printk("CPU configuration botched (ID %08x), unable "
+ "to continue.\n", read_cpuid_id());
+ while (1);
+ }
+
+ cpu_name = list->cpu_name;
+
+#ifdef MULTI_CPU
+ processor = *list->proc;
+#endif
+#ifdef MULTI_TLB
+ cpu_tlb = *list->tlb;
+#endif
+#ifdef MULTI_USER
+ cpu_user = *list->user;
+#endif
+#ifdef MULTI_CACHE
+ cpu_cache = *list->cache;
+#endif
+
+ printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n",
+ cpu_name, read_cpuid_id(), read_cpuid_id() & 15,
+ proc_arch[cpu_architecture()], cr_alignment);
+
+ sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS);
+ sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
+ elf_hwcap = list->elf_hwcap;
+#ifndef CONFIG_ARM_THUMB
+ elf_hwcap &= ~HWCAP_THUMB;
+#endif
+
+ feat_v6_fixup();
+
+ cacheid_init();
+ cpu_init();
+}
+
void __init dump_machine_table(void)
{
struct machine_desc *p;
#endif
reserve_crashkernel();
- cpu_init();
tcm_init();
+#ifdef CONFIG_ZONE_DMA
+ if (mdesc->dma_zone_size) {
+ extern unsigned long arm_dma_zone_size;
+ arm_dma_zone_size = mdesc->dma_zone_size;
+ }
+#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif
"neon",
"vfpv3",
"vfpv3d16",
+ "tls",
+ "vfpv4",
+ "idiva",
+ "idivt",
NULL
};
/*
* Save CPU state for a suspend
* r1 = v:p offset
- * r3 = virtual return function
- * Note: sp is decremented to allocate space for CPU state on stack
- * r0-r3,r9,r10,lr corrupted
+ * r2 = suspend function arg0
+ * r3 = suspend function
*/
-ENTRY(cpu_suspend)
- mov r9, lr
+ENTRY(__cpu_suspend)
+ stmfd sp!, {r4 - r11, lr}
#ifdef MULTI_CPU
ldr r10, =processor
- mov r2, sp @ current virtual SP
- ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
+ ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
- sub sp, sp, r0 @ allocate CPU state on stack
- mov r0, sp @ save pointer
+#else
+ ldr r5, =cpu_suspend_size
+ ldr ip, =cpu_do_resume
+#endif
+ mov r6, sp @ current virtual SP
+ sub sp, sp, r5 @ allocate CPU state on stack
+ mov r0, sp @ save pointer to CPU save block
add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn
- ldr r3, =sleep_save_sp
- add r2, sp, r1 @ convert SP to phys
+ stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn
+ ldr r5, =sleep_save_sp
+ add r6, sp, r1 @ convert SP to phys
+ stmfd sp!, {r2, r3} @ save suspend func arg and pointer
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
- str r2, [r3, lr, lsl #2] @ save phys SP
+ str r6, [r5, lr, lsl #2] @ save phys SP
#else
- str r2, [r3] @ save phys SP
+ str r6, [r5] @ save phys SP
#endif
+#ifdef MULTI_CPU
mov lr, pc
ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
#else
- mov r2, sp @ current virtual SP
- ldr r0, =cpu_suspend_size
- sub sp, sp, r0 @ allocate CPU state on stack
- mov r0, sp @ save pointer
- stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn
- ldr r3, =sleep_save_sp
- add r2, sp, r1 @ convert SP to phys
-#ifdef CONFIG_SMP
- ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
- ALT_UP(mov lr, #0)
- and lr, lr, #15
- str r2, [r3, lr, lsl #2] @ save phys SP
-#else
- str r2, [r3] @ save phys SP
-#endif
bl cpu_do_suspend
#endif
@ flush data cache
#ifdef MULTI_CACHE
ldr r10, =cpu_cache
- mov lr, r9
+ mov lr, pc
ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
#else
- mov lr, r9
- b __cpuc_flush_kern_all
+ bl __cpuc_flush_kern_all
#endif
-ENDPROC(cpu_suspend)
+ adr lr, BSYM(cpu_suspend_abort)
+ ldmfd sp!, {r0, pc} @ call suspend fn
+ENDPROC(__cpu_suspend)
.ltorg
+cpu_suspend_abort:
+ ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn
+ mov sp, r2
+ ldmfd sp!, {r4 - r11, pc}
+ENDPROC(cpu_suspend_abort)
+
/*
* r0 = control register value
* r1 = v:p offset (preserved by cpu_do_resume)
cpu_resume_after_mmu:
str r5, [r2, r4, lsl #2] @ restore old mapping
mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
- mov pc, lr
+ bl cpu_init @ restore the und/abt/irq banked regs
+ mov r0, #0 @ return zero on success
+ ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_resume_after_mmu)
/*
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
-#ifdef MULTI_CPU
- @ load v:p, stack, return fn, resume fn
- ARM( ldmia r0!, {r1, sp, lr, pc} )
-THUMB( ldmia r0!, {r1, r2, r3, r4} )
+ @ load v:p, stack, resume fn
+ ARM( ldmia r0!, {r1, sp, pc} )
+THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
-THUMB( mov lr, r3 )
-THUMB( bx r4 )
-#else
- @ load v:p, stack, return fn
- ARM( ldmia r0!, {r1, sp, lr} )
-THUMB( ldmia r0!, {r1, r2, lr} )
-THUMB( mov sp, r2 )
- b cpu_do_resume
-#endif
+THUMB( bx r3 )
ENDPROC(cpu_resume)
sleep_save_sp:
*/
if (max_cpus > ncores)
max_cpus = ncores;
-
- if (max_cpus > 1) {
+ if (ncores > 1 && max_cpus) {
/*
* Enable the local timer or broadcast device for the
* boot CPU, but only if we have more than one CPU.
*/
percpu_timer_setup();
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time. A platform should
+ * re-initialize the map in platform_smp_prepare_cpus() if
+ * present != possible (e.g. physical hotplug).
+ */
+ init_cpu_present(&cpu_possible_map);
+
/*
* Initialise the SCU if there are more than one CPU
* and let them know where to start.
#define SCU_INVALIDATE 0x0c
#define SCU_FPGA_REVISION 0x10
+#ifdef CONFIG_SMP
/*
* Get the number of CPU cores from the SCU configuration
*/
*/
flush_cache_all();
}
+#endif
/*
* Set the executing CPUs power mode as defined. This will be in
#include "tcm.h"
static struct gen_pool *tcm_pool;
+static bool dtcm_present;
+static bool itcm_present;
/* TCM section definitions from the linker */
extern char __itcm_start, __sitcm_text, __eitcm_text;
}
EXPORT_SYMBOL(tcm_free);
+bool tcm_dtcm_present(void)
+{
+ return dtcm_present;
+}
+EXPORT_SYMBOL(tcm_dtcm_present);
+
+bool tcm_itcm_present(void)
+{
+ return itcm_present;
+}
+EXPORT_SYMBOL(tcm_itcm_present);
+
static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks,
u32 *offset)
{
(tcm_region & 1) ? "" : "not ");
}
+ /* Not much fun you can do with a size 0 bank */
+ if (tcm_size == 0)
+ return 0;
+
/* Force move the TCM bank to where we want it, enable */
tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1;
u32 tcm_status = read_cpuid_tcmstatus();
u8 dtcm_banks = (tcm_status >> 16) & 0x03;
u8 itcm_banks = (tcm_status & 0x03);
+ size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data;
+ size_t itcm_code_sz = &__eitcm_text - &__sitcm_text;
char *start;
char *end;
char *ram;
int ret;
int i;
+ /* Values greater than 2 for D/ITCM banks are "reserved" */
+ if (dtcm_banks > 2)
+ dtcm_banks = 0;
+ if (itcm_banks > 2)
+ itcm_banks = 0;
+
/* Setup DTCM if present */
if (dtcm_banks > 0) {
for (i = 0; i < dtcm_banks; i++) {
if (ret)
return;
}
+ /* This means you compiled more code than fits into DTCM */
+ if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) {
+ pr_info("CPU DTCM: %u bytes of code compiled to "
+ "DTCM but only %lu bytes of DTCM present\n",
+ dtcm_code_sz, (dtcm_end - DTCM_OFFSET));
+ goto no_dtcm;
+ }
dtcm_res.end = dtcm_end - 1;
request_resource(&iomem_resource, &dtcm_res);
dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET;
start = &__sdtcm_data;
end = &__edtcm_data;
ram = &__dtcm_start;
- /* This means you compiled more code than fits into DTCM */
- BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET));
- memcpy(start, ram, (end-start));
- pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+ memcpy(start, ram, dtcm_code_sz);
+ pr_debug("CPU DTCM: copied data from %p - %p\n",
+ start, end);
+ dtcm_present = true;
+ } else if (dtcm_code_sz) {
+ pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no "
+ "DTCM banks present in CPU\n", dtcm_code_sz);
}
+no_dtcm:
/* Setup ITCM if present */
if (itcm_banks > 0) {
for (i = 0; i < itcm_banks; i++) {
if (ret)
return;
}
+ /* This means you compiled more code than fits into ITCM */
+ if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) {
+ pr_info("CPU ITCM: %u bytes of code compiled to "
+ "ITCM but only %lu bytes of ITCM present\n",
+ itcm_code_sz, (itcm_end - ITCM_OFFSET));
+ return;
+ }
itcm_res.end = itcm_end - 1;
request_resource(&iomem_resource, &itcm_res);
itcm_iomap[0].length = itcm_end - ITCM_OFFSET;
start = &__sitcm_text;
end = &__eitcm_text;
ram = &__itcm_start;
- /* This means you compiled more code than fits into ITCM */
- BUG_ON((end - start) > (itcm_end - ITCM_OFFSET));
- memcpy(start, ram, (end-start));
- pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+ memcpy(start, ram, itcm_code_sz);
+ pr_debug("CPU ITCM: copied code from %p - %p\n",
+ start, end);
+ itcm_present = true;
+ } else if (itcm_code_sz) {
+ pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no "
+ "ITCM banks present in CPU\n", itcm_code_sz);
}
}
*/
static int __init setup_tcm_pool(void)
{
- u32 tcm_status = read_cpuid_tcmstatus();
u32 dtcm_pool_start = (u32) &__edtcm_data;
u32 itcm_pool_start = (u32) &__eitcm_text;
int ret;
pr_debug("Setting up TCM memory pool\n");
/* Add the rest of DTCM to the TCM pool */
- if (tcm_status & (0x03 << 16)) {
+ if (dtcm_present) {
if (dtcm_pool_start < dtcm_end) {
ret = gen_pool_add(tcm_pool, dtcm_pool_start,
dtcm_end - dtcm_pool_start, -1);
}
/* Add the rest of ITCM to the TCM pool */
- if (tcm_status & 0x03) {
+ if (itcm_present) {
if (itcm_pool_start < itcm_end) {
ret = gen_pool_add(tcm_pool, itcm_pool_start,
itcm_end - itcm_pool_start, -1);
pc = (void __user *)instruction_pointer(regs);
if (processor_mode(regs) == SVC_MODE) {
- instr = *(u32 *) pc;
+#ifdef CONFIG_THUMB2_KERNEL
+ if (thumb_mode(regs)) {
+ instr = ((u16 *)pc)[0];
+ if (is_wide_instruction(instr)) {
+ instr <<= 16;
+ instr |= ((u16 *)pc)[1];
+ }
+ } else
+#endif
+ instr = *(u32 *) pc;
} else if (thumb_mode(regs)) {
get_user(instr, (u16 __user *)pc);
+ if (is_wide_instruction(instr)) {
+ unsigned int instr2;
+ get_user(instr2, (u16 __user *)pc+1);
+ instr <<= 16;
+ instr |= instr2;
+ }
} else {
get_user(instr, (u32 __user *)pc);
}
SECTIONS
{
-#ifdef CONFIG_XIP_KERNEL
- . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
-#else
- . = PAGE_OFFSET + TEXT_OFFSET;
-#endif
-
- .init : { /* Init code and data */
- _stext = .;
- _sinittext = .;
- HEAD_TEXT
- INIT_TEXT
- ARM_EXIT_KEEP(EXIT_TEXT)
- _einittext = .;
- ARM_CPU_DISCARD(PROC_INFO)
- __arch_info_begin = .;
- *(.arch.info.init)
- __arch_info_end = .;
- __tagtable_begin = .;
- *(.taglist.init)
- __tagtable_end = .;
-#ifdef CONFIG_SMP_ON_UP
- __smpalt_begin = .;
- *(.alt.smp.init)
- __smpalt_end = .;
-#endif
-
- __pv_table_begin = .;
- *(.pv_table)
- __pv_table_end = .;
-
- INIT_SETUP(16)
-
- INIT_CALLS
- CON_INITCALL
- SECURITY_INITCALL
- INIT_RAM_FS
-
-#ifndef CONFIG_XIP_KERNEL
- __init_begin = _stext;
- INIT_DATA
- ARM_EXIT_KEEP(EXIT_DATA)
-#endif
- }
-
- PERCPU_SECTION(32)
-
-#ifndef CONFIG_XIP_KERNEL
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-#endif
-
/*
* unwind exit sections must be discarded before the rest of the
* unwind sections get included.
#ifndef CONFIG_MMU
*(.fixup)
*(__ex_table)
+#endif
+#ifndef CONFIG_SMP_ON_UP
+ *(.alt.smp.init)
#endif
}
+#ifdef CONFIG_XIP_KERNEL
+ . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
+#else
+ . = PAGE_OFFSET + TEXT_OFFSET;
+#endif
+ .head.text : {
+ _text = .;
+ HEAD_TEXT
+ }
.text : { /* Real text segment */
- _text = .; /* Text and read-only data */
+ _stext = .; /* Text and read-only data */
__exception_text_start = .;
*(.exception.text)
__exception_text_end = .;
*(.fixup)
#endif
*(.gnu.warning)
- *(.rodata)
- *(.rodata.*)
*(.glue_7)
*(.glue_7t)
. = ALIGN(4);
_etext = .; /* End of text and rodata section */
+#ifndef CONFIG_XIP_KERNEL
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+#endif
+
+ INIT_TEXT_SECTION(8)
+ .exit.text : {
+ ARM_EXIT_KEEP(EXIT_TEXT)
+ }
+ .init.proc.info : {
+ ARM_CPU_DISCARD(PROC_INFO)
+ }
+ .init.arch.info : {
+ __arch_info_begin = .;
+ *(.arch.info.init)
+ __arch_info_end = .;
+ }
+ .init.tagtable : {
+ __tagtable_begin = .;
+ *(.taglist.init)
+ __tagtable_end = .;
+ }
+#ifdef CONFIG_SMP_ON_UP
+ .init.smpalt : {
+ __smpalt_begin = .;
+ *(.alt.smp.init)
+ __smpalt_end = .;
+ }
+#endif
+ .init.pv_table : {
+ __pv_table_begin = .;
+ *(.pv_table)
+ __pv_table_end = .;
+ }
+ .init.data : {
+#ifndef CONFIG_XIP_KERNEL
+ INIT_DATA
+#endif
+ INIT_SETUP(16)
+ INIT_CALLS
+ CON_INITCALL
+ SECURITY_INITCALL
+ INIT_RAM_FS
+ }
+#ifndef CONFIG_XIP_KERNEL
+ .exit.data : {
+ ARM_EXIT_KEEP(EXIT_DATA)
+ }
+#endif
+
+ PERCPU_SECTION(32)
+
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
#else
+ __init_end = .;
. = ALIGN(THREAD_SIZE);
__data_loc = .;
#endif
/* Default discards */
DISCARDS
-
-#ifndef CONFIG_SMP_ON_UP
- /DISCARD/ : {
- *(.alt.smp.init)
- }
-#endif
}
/*
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- .macro irq_prio_table
- .endm
-
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da830_evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = da850_evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm355_evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm355_leopard_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = dm365_evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = evm_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = mityomapl138_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_ntosd2_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = omapl138_hawk_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
.init_machine = davinci_sffsdr_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
.init_irq = cp_intc_init,
.timer = &davinci_timer,
.init_machine = tnetv107x_evm_board_init,
+ .dma_zone_size = SZ_128M,
MACHINE_END
#endif
1002:
.endm
-
- .macro irq_prio_table
- .endm
*/
#define CONSISTENT_DMA_SIZE (14<<20)
-/*
- * Restrict DMA-able region to workaround silicon bug. The bug
- * restricts buffers available for DMA to video hardware to be
- * below 128M
- */
-#define ARM_DMA_ZONE_SIZE SZ_128M
-
#endif /* __ASM_ARCH_MEMORY_H */
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
scu_enable(scu_base_addr());
SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL),
};
-void exynos4_cpu_suspend(void)
+static int exynos4_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
unsigned long mask = 0xFFFFFFFF;
.text
- /*
- * s3c_cpu_save
- *
- * entry:
- * r1 = v:p offset
- */
-
-ENTRY(s3c_cpu_save)
-
- stmfd sp!, { r3 - r12, lr }
- ldr r3, =resume_with_mmu
- bl cpu_suspend
-
- ldr r0, =pm_cpu_sleep
- ldr r0, [ r0 ]
- mov pc, r0
-
-resume_with_mmu:
- ldmfd sp!, { r3 - r12, pc }
-
- .ltorg
-
/*
* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
+ .dma_zone_size = SZ_256M,
MACHINE_END
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
.init_machine = init_eval_h7202,
+ .dma_zone_size = SZ_256M,
MACHINE_END
tst \irqstat, #1 @ bit 0 should be set
.endm
- .macro irq_prio_table
- .endm
-
#else
#error hynix processor selection missmatch
#endif
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x40000000)
-/*
- * This is the maximum DMA address that can be DMAd to.
- * There should not be more than (0xd0000000 - 0xc0000000)
- * bytes of RAM.
- */
-#define ARM_DMA_ZONE_SIZE SZ_256M
-
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = avila_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
/*
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = avila_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
}
+static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
+{
+ return (dma_addr + size) >= SZ_64M;
+}
+
/*
* Setup DMA mask to 64MB on PCI devices. Ignore all other devices.
*/
if(dev->bus == &pci_bus_type) {
*dev->dma_mask = SZ_64M - 1;
dev->coherent_dma_mask = SZ_64M - 1;
- dmabounce_register_dev(dev, 2048, 4096);
+ dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce);
}
return 0;
}
return 0;
}
-int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
-{
- return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
-}
-
void __init ixp4xx_pci_preinit(void)
{
unsigned long cpuid = read_cpuid_id();
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = coyote_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
.init_machine = dsmg600_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = fsg_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gateway7001_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gmlr_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = gtwx5715_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
*/
#define PLAT_PHYS_OFFSET UL(0x00000000)
-#ifdef CONFIG_PCI
-#define ARM_DMA_ZONE_SIZE SZ_64M
-#endif
-
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = ixdp425_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
.init_machine = nas100d_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
.init_machine = nslu2_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = vulcan_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
.timer = &ixp4xx_timer,
.boot_params = 0x0100,
.init_machine = wg302v2_init,
+#if defined(CONFIG_PCI)
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
#endif
rsb \irqnr, \irqnr, #31
teq \irqstat, #0
.endm
-
- .macro irq_prio_table
- .endm
-
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
}
scratchpad_contents.boot_config_ptr = 0x0;
if (cpu_is_omap3630())
scratchpad_contents.public_restore_ptr =
- virt_to_phys(get_omap3630_restore_pointer());
+ virt_to_phys(omap3_restore_3630);
else if (omap_rev() != OMAP3430_REV_ES3_0 &&
omap_rev() != OMAP3430_REV_ES3_1)
scratchpad_contents.public_restore_ptr =
- virt_to_phys(get_restore_pointer());
+ virt_to_phys(omap3_restore);
else
scratchpad_contents.public_restore_ptr =
- virt_to_phys(get_es3_restore_pointer());
+ virt_to_phys(omap3_restore_es3);
+
if (omap_type() == OMAP2_DEVICE_TYPE_GP)
scratchpad_contents.secure_ram_restore_ptr = 0x0;
else
extern void omap3_save_scratchpad_contents(void);
extern void omap3_clear_scratchpad_contents(void);
-extern u32 *get_restore_pointer(void);
-extern u32 *get_es3_restore_pointer(void);
-extern u32 *get_omap3630_restore_pointer(void);
+extern void omap3_restore(void);
+extern void omap3_restore_es3(void);
+extern void omap3_restore_3630(void);
extern u32 omap3_arm_context[128];
extern void omap3_control_save_context(void);
extern void omap3_control_restore_context(void);
#endif
#endif /* MULTI_OMAP2 */
-
- .macro irq_prio_table
- .endm
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
/*
* Initialise the SCU and wake up the secondary core using
#define pm_dbg_regset_init(reg_set) do {} while (0);
#endif /* CONFIG_PM_DEBUG */
+/* 24xx */
extern void omap24xx_idle_loop_suspend(void);
+extern unsigned int omap24xx_idle_loop_suspend_sz;
extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
-extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
-extern int save_secure_ram_context(u32 *addr);
-extern void omap3_save_scratchpad_contents(void);
+extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
+/* 3xxx */
+extern void omap34xx_cpu_suspend(int save_state);
+
+/* omap3_do_wfi function pointer and size, for copy to SRAM */
+extern void omap3_do_wfi(void);
+extern unsigned int omap3_do_wfi_sz;
+/* ... and its pointer from SRAM after copy */
+extern void (*omap3_do_wfi_sram)(void);
+
+/* save_secure_ram_context function pointer and size, for copy to SRAM */
+extern int save_secure_ram_context(u32 *addr);
extern unsigned int save_secure_ram_context_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
-extern unsigned int omap34xx_cpu_suspend_sz;
+
+extern void omap3_save_scratchpad_contents(void);
#define PM_RTA_ERRATUM_i608 (1 << 0)
#define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1)
#include <linux/console.h>
#include <trace/events/power.h>
+#include <asm/suspend.h>
+
#include <plat/sram.h>
#include "clockdomain.h"
#include "powerdomain.h"
#include <plat/gpmc.h>
#include <plat/dma.h>
-#include <asm/tlbflush.h>
-
#include "cm2xxx_3xxx.h"
#include "cm-regbits-34xx.h"
#include "prm-regbits-34xx.h"
}
#endif
-/* Scratchpad offsets */
-#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
-#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
-#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8
-
/* pm34xx errata defined in pm.h */
u16 pm34xx_errata;
static LIST_HEAD(pwrst_list);
-static void (*_omap_sram_idle)(u32 *addr, int save_state);
-
static int (*_omap_save_secure_sram)(u32 *addr);
+void (*omap3_do_wfi_sram)(void);
static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
static struct powerdomain *core_pwrdm, *per_pwrdm;
return IRQ_HANDLED;
}
-/* Function to restore the table entry that was modified for enabling MMU */
-static void restore_table_entry(void)
+static void omap34xx_save_context(u32 *save)
{
- void __iomem *scratchpad_address;
- u32 previous_value, control_reg_value;
- u32 *address;
+ u32 val;
- scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+ /* Read Auxiliary Control Register */
+ asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val));
+ *save++ = 1;
+ *save++ = val;
- /* Get address of entry that was modified */
- address = (u32 *)__raw_readl(scratchpad_address +
- OMAP343X_TABLE_ADDRESS_OFFSET);
- /* Get the previous value which needs to be restored */
- previous_value = __raw_readl(scratchpad_address +
- OMAP343X_TABLE_VALUE_OFFSET);
- address = __va(address);
- *address = previous_value;
- flush_tlb_all();
- control_reg_value = __raw_readl(scratchpad_address
- + OMAP343X_CONTROL_REG_VALUE_OFFSET);
- /* This will enable caches and prediction */
- set_cr(control_reg_value);
+ /* Read L2 AUX ctrl register */
+ asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val));
+ *save++ = 1;
+ *save++ = val;
+}
+
+static int omap34xx_do_sram_idle(unsigned long save_state)
+{
+ omap34xx_cpu_suspend(save_state);
+ return 0;
}
void omap_sram_idle(void)
int core_prev_state, per_prev_state;
u32 sdrc_pwr = 0;
- if (!_omap_sram_idle)
- return;
-
pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
pwrdm_clear_all_prev_pwrst(neon_pwrdm);
pwrdm_clear_all_prev_pwrst(core_pwrdm);
sdrc_pwr = sdrc_read_reg(SDRC_POWER);
/*
- * omap3_arm_context is the location where ARM registers
- * get saved. The restore path then reads from this
- * location and restores them back.
+ * omap3_arm_context is the location where some ARM context
+ * get saved. The rest is placed on the stack, and restored
+ * from there before resuming.
*/
- _omap_sram_idle(omap3_arm_context, save_state);
- cpu_init();
+ if (save_state)
+ omap34xx_save_context(omap3_arm_context);
+ if (save_state == 1 || save_state == 3)
+ cpu_suspend(save_state, omap34xx_do_sram_idle);
+ else
+ omap34xx_do_sram_idle(save_state);
/* Restore normal SDRC POWER settings */
if (omap_rev() >= OMAP3430_REV_ES3_0 &&
core_next_state == PWRDM_POWER_OFF)
sdrc_write_reg(sdrc_pwr, SDRC_POWER);
- /* Restore table entry modified during MMU restoration */
- if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
- restore_table_entry();
-
/* CORE */
if (core_next_state < PWRDM_POWER_ON) {
core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
return 0;
}
+/*
+ * Push functions to SRAM
+ *
+ * The minimum set of functions is pushed to SRAM for execution:
+ * - omap3_do_wfi for erratum i581 WA,
+ * - save_secure_ram_context for security extensions.
+ */
void omap_push_sram_idle(void)
{
- _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
- omap34xx_cpu_suspend_sz);
+ omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
+
if (omap_type() != OMAP2_DEVICE_TYPE_GP)
_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
save_secure_ram_context_sz);
per_clkdm = clkdm_lookup("per_clkdm");
core_clkdm = clkdm_lookup("core_clkdm");
- omap_push_sram_idle();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
#endif /* CONFIG_SUSPEND */
* API functions
*/
-/*
- * The "get_*restore_pointer" functions are used to provide a
- * physical restore address where the ROM code jumps while waking
- * up from MPU OFF/OSWR state.
- * The restore pointer is stored into the scratchpad.
- */
-
- .text
-/* Function call to get the restore pointer for resume from OFF */
-ENTRY(get_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
- adr r0, restore
- ldmfd sp!, {pc} @ restore regs and return
-ENDPROC(get_restore_pointer)
- .align
-ENTRY(get_restore_pointer_sz)
- .word . - get_restore_pointer
-
- .text
-/* Function call to get the restore pointer for 3630 resume from OFF */
-ENTRY(get_omap3630_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
- adr r0, restore_3630
- ldmfd sp!, {pc} @ restore regs and return
-ENDPROC(get_omap3630_restore_pointer)
- .align
-ENTRY(get_omap3630_restore_pointer_sz)
- .word . - get_omap3630_restore_pointer
-
- .text
-/* Function call to get the restore pointer for ES3 to resume from OFF */
-ENTRY(get_es3_restore_pointer)
- stmfd sp!, {lr} @ save registers on stack
- adr r0, restore_es3
- ldmfd sp!, {pc} @ restore regs and return
-ENDPROC(get_es3_restore_pointer)
- .align
-ENTRY(get_es3_restore_pointer_sz)
- .word . - get_es3_restore_pointer
-
.text
/*
* L2 cache needs to be toggled for stable OFF mode functionality on 3630.
/* Function to call rom code to save secure ram context */
.align 3
ENTRY(save_secure_ram_context)
- stmfd sp!, {r1-r12, lr} @ save registers on stack
+ stmfd sp!, {r4 - r11, lr} @ save registers on stack
adr r3, api_params @ r3 points to parameters
str r0, [r3,#0x4] @ r0 has sdram address
ldr r12, high_mask
nop
nop
nop
- ldmfd sp!, {r1-r12, pc}
+ ldmfd sp!, {r4 - r11, pc}
.align
sram_phy_addr_mask:
.word SRAM_BASE_P
*
*
* Notes:
- * - this code gets copied to internal SRAM at boot and after wake-up
- * from OFF mode. The execution pointer in SRAM is _omap_sram_idle.
+ * - only the minimum set of functions gets copied to internal SRAM at boot
+ * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function
+ * pointers in SDRAM or SRAM are called depending on the desired low power
+ * target state.
* - when the OMAP wakes up it continues at different execution points
* depending on the low power mode (non-OFF vs OFF modes),
* cf. 'Resume path for xxx mode' comments.
*/
.align 3
ENTRY(omap34xx_cpu_suspend)
- stmfd sp!, {r0-r12, lr} @ save registers on stack
+ stmfd sp!, {r4 - r11, lr} @ save registers on stack
/*
- * r0 contains CPU context save/restore pointer in sdram
- * r1 contains information about saving context:
+ * r0 contains information about saving context:
* 0 - No context lost
* 1 - Only L1 and logic lost
* 2 - Only L2 lost (Even L1 is retained we clean it along with L2)
* 3 - Both L1 and L2 lost and logic lost
*/
- /* Directly jump to WFI is the context save is not required */
- cmp r1, #0x0
- beq omap3_do_wfi
+ /*
+ * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
+ * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
+ */
+ ldr r4, omap3_do_wfi_sram_addr
+ ldr r5, [r4]
+ cmp r0, #0x0 @ If no context save required,
+ bxeq r5 @ jump to the WFI code in SRAM
+
/* Otherwise fall through to the save context code */
save_context_wfi:
- mov r8, r0 @ Store SDRAM address in r8
- mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register
- mov r4, #0x1 @ Number of parameters for restore call
- stmia r8!, {r4-r5} @ Push parameters for restore call
- mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register
- stmia r8!, {r4-r5} @ Push parameters for restore call
-
- /* Check what that target sleep state is from r1 */
- cmp r1, #0x2 @ Only L2 lost, no need to save context
- beq clean_caches
-
-l1_logic_lost:
- mov r4, sp @ Store sp
- mrs r5, spsr @ Store spsr
- mov r6, lr @ Store lr
- stmia r8!, {r4-r6}
-
- mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register
- mrc p15, 0, r5, c2, c0, 0 @ TTBR0
- mrc p15, 0, r6, c2, c0, 1 @ TTBR1
- mrc p15, 0, r7, c2, c0, 2 @ TTBCR
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mrc p15, 0, r5, c10, c2, 0 @ PRRR
- mrc p15, 0, r6, c10, c2, 1 @ NMRR
- stmia r8!,{r4-r6}
-
- mrc p15, 0, r4, c13, c0, 1 @ Context ID
- mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- mrs r7, cpsr @ Store current cpsr
- stmia r8!, {r4-r7}
-
- mrc p15, 0, r4, c1, c0, 0 @ save control register
- stmia r8!, {r4}
-
-clean_caches:
/*
* jump out to kernel flush routine
* - reuse that code is better
THUMB( nop )
.arm
-omap3_do_wfi:
+ b omap3_do_wfi
+
+/*
+ * Local variables
+ */
+omap3_do_wfi_sram_addr:
+ .word omap3_do_wfi_sram
+kernel_flush:
+ .word v7_flush_dcache_all
+
+/* ===================================
+ * == WFI instruction => Enter idle ==
+ * ===================================
+ */
+
+/*
+ * Do WFI instruction
+ * Includes the resume path for non-OFF modes
+ *
+ * This code gets copied to internal SRAM and is accessible
+ * from both SDRAM and SRAM:
+ * - executed from SRAM for non-off modes (omap3_do_wfi_sram),
+ * - executed from SDRAM for OFF mode (omap3_do_wfi).
+ */
+ .align 3
+ENTRY(omap3_do_wfi)
ldr r4, sdrc_power @ read the SDRC_POWER register
ldr r5, [r4] @ read the contents of SDRC_POWER
orr r5, r5, #0x40 @ enable self refresh on idle req
nop
nop
nop
- bl wait_sdrc_ok
+/*
+ * This function implements the erratum ID i581 WA:
+ * SDRC state restore before accessing the SDRAM
+ *
+ * Only used at return from non-OFF mode. For OFF
+ * mode the ROM code configures the SDRC and
+ * the DPLL before calling the restore code directly
+ * from DDR.
+ */
+
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+
+/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
+ ldr r4, cm_idlest_ckgen
+wait_dpll3_lock:
+ ldr r5, [r4]
+ tst r5, #1
+ beq wait_dpll3_lock
+
+ ldr r4, cm_idlest1_core
+wait_sdrc_ready:
+ ldr r5, [r4]
+ tst r5, #0x2
+ bne wait_sdrc_ready
+ /* allow DLL powerdown upon hw idle req */
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+
+/*
+ * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+ * base instead.
+ * Be careful not to clobber r7 when maintaing this code.
+ */
+
+is_dll_in_lock_mode:
+ /* Is dll in lock mode? */
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ tst r5, #0x4
+ bne exit_nonoff_modes @ Return if locked
+ /* wait till dll locks */
+ adr r7, kick_counter
+wait_dll_lock_timed:
+ ldr r4, wait_dll_lock_counter
+ add r4, r4, #1
+ str r4, [r7, #wait_dll_lock_counter - kick_counter]
+ ldr r4, sdrc_dlla_status
+ /* Wait 20uS for lock */
+ mov r6, #8
+wait_dll_lock:
+ subs r6, r6, #0x1
+ beq kick_dll
+ ldr r5, [r4]
+ and r5, r5, #0x4
+ cmp r5, #0x4
+ bne wait_dll_lock
+ b exit_nonoff_modes @ Return when locked
+
+ /* disable/reenable DLL if not locked */
+kick_dll:
+ ldr r4, sdrc_dlla_ctrl
+ ldr r5, [r4]
+ mov r6, r5
+ bic r6, #(1<<3) @ disable dll
+ str r6, [r4]
+ dsb
+ orr r6, r6, #(1<<3) @ enable dll
+ str r6, [r4]
+ dsb
+ ldr r4, kick_counter
+ add r4, r4, #1
+ str r4, [r7] @ kick_counter
+ b wait_dll_lock_timed
+
+exit_nonoff_modes:
+ /* Re-enable C-bit if needed */
mrc p15, 0, r0, c1, c0, 0
tst r0, #(1 << 2) @ Check C bit enabled?
orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared
* == Exit point from non-OFF modes ==
* ===================================
*/
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
+ ldmfd sp!, {r4 - r11, pc} @ restore regs and return
+
+/*
+ * Local variables
+ */
+sdrc_power:
+ .word SDRC_POWER_V
+cm_idlest1_core:
+ .word CM_IDLEST1_CORE_V
+cm_idlest_ckgen:
+ .word CM_IDLEST_CKGEN_V
+sdrc_dlla_status:
+ .word SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+ .word SDRC_DLLA_CTRL_V
+ /*
+ * When exporting to userspace while the counters are in SRAM,
+ * these 2 words need to be at the end to facilitate retrival!
+ */
+kick_counter:
+ .word 0
+wait_dll_lock_counter:
+ .word 0
+
+ENTRY(omap3_do_wfi_sz)
+ .word . - omap3_do_wfi
/*
* restore_es3: applies to 34xx >= ES3.0
* restore_3630: applies to 36xx
* restore: common code for 3xxx
+ *
+ * Note: when back from CORE and MPU OFF mode we are running
+ * from SDRAM, without MMU, without the caches and prediction.
+ * Also the SRAM content has been cleared.
*/
-restore_es3:
+ENTRY(omap3_restore_es3)
ldr r5, pm_prepwstst_core_p
ldr r4, [r5]
and r4, r4, #0x3
cmp r4, #0x0 @ Check if previous power state of CORE is OFF
- bne restore
+ bne omap3_restore @ Fall through to OMAP3 common code
adr r0, es3_sdrc_fix
ldr r1, sram_base
ldr r2, es3_sdrc_fix_sz
bne copy_to_sram
ldr r1, sram_base
blx r1
- b restore
+ b omap3_restore @ Fall through to OMAP3 common code
+ENDPROC(omap3_restore_es3)
-restore_3630:
+ENTRY(omap3_restore_3630)
ldr r1, pm_prepwstst_core_p
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if previous power state of CORE is OFF
- bne restore
+ bne omap3_restore @ Fall through to OMAP3 common code
/* Disable RTA before giving control */
ldr r1, control_mem_rta
mov r2, #OMAP36XX_RTA_DISABLE
str r2, [r1]
+ENDPROC(omap3_restore_3630)
/* Fall through to common code for the remaining logic */
-restore:
+ENTRY(omap3_restore)
/*
- * Check what was the reason for mpu reset and store the reason in r9:
- * 0 - No context lost
- * 1 - Only L1 and logic lost
- * 2 - Only L2 lost - In this case, we wont be here
- * 3 - Both L1 and L2 lost
+ * Read the pwstctrl register to check the reason for mpu reset.
+ * This tells us what was lost.
*/
ldr r1, pm_pwstctrl_mpu
ldr r2, [r1]
and r2, r2, #0x3
cmp r2, #0x0 @ Check if target power state was OFF or RET
- moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
- movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
bne logic_l1_restore
ldr r0, l2dis_3630
orr r1, r1, #2 @ re-enable L2 cache
mcr p15, 0, r1, c1, c0, 1
skipl2reen:
- mov r1, #0
- /*
- * Invalidate all instruction caches to PoU
- * and flush branch target cache
- */
- mcr p15, 0, r1, c7, c5, 0
- ldr r4, scratchpad_base
- ldr r3, [r4,#0xBC]
- adds r3, r3, #16
-
- ldmia r3!, {r4-r6}
- mov sp, r4 @ Restore sp
- msr spsr_cxsf, r5 @ Restore spsr
- mov lr, r6 @ Restore lr
-
- ldmia r3!, {r4-r7}
- mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register
- mcr p15, 0, r5, c2, c0, 0 @ TTBR0
- mcr p15, 0, r6, c2, c0, 1 @ TTBR1
- mcr p15, 0, r7, c2, c0, 2 @ TTBCR
-
- ldmia r3!,{r4-r6}
- mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register
- mcr p15, 0, r5, c10, c2, 0 @ PRRR
- mcr p15, 0, r6, c10, c2, 1 @ NMRR
-
-
- ldmia r3!,{r4-r7}
- mcr p15, 0, r4, c13, c0, 1 @ Context ID
- mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID
- mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address
- msr cpsr, r7 @ store cpsr
-
- /* Enabling MMU here */
- mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl
- /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */
- and r7, #0x7
- cmp r7, #0x0
- beq usettbr0
-ttbr_error:
- /*
- * More work needs to be done to support N[0:2] value other than 0
- * So looping here so that the error can be detected
- */
- b ttbr_error
-usettbr0:
- mrc p15, 0, r2, c2, c0, 0
- ldr r5, ttbrbit_mask
- and r2, r5
- mov r4, pc
- ldr r5, table_index_mask
- and r4, r5 @ r4 = 31 to 20 bits of pc
- /* Extract the value to be written to table entry */
- ldr r1, table_entry
- /* r1 has the value to be written to table entry*/
- add r1, r1, r4
- /* Getting the address of table entry to modify */
- lsr r4, #18
- /* r2 has the location which needs to be modified */
- add r2, r4
- /* Storing previous entry of location being modified */
- ldr r5, scratchpad_base
- ldr r4, [r2]
- str r4, [r5, #0xC0]
- /* Modify the table entry */
- str r1, [r2]
- /*
- * Storing address of entry being modified
- * - will be restored after enabling MMU
- */
- ldr r5, scratchpad_base
- str r2, [r5, #0xC4]
-
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
- mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
- mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
- mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
- /*
- * Restore control register. This enables the MMU.
- * The caches and prediction are not enabled here, they
- * will be enabled after restoring the MMU table entry.
- */
- ldmia r3!, {r4}
- /* Store previous value of control register in scratchpad */
- str r4, [r5, #0xC8]
- ldr r2, cache_pred_disable_mask
- and r4, r2
- mcr p15, 0, r4, c1, c0, 0
- dsb
- isb
- ldr r0, =restoremmu_on
- bx r0
+ /* Now branch to the common CPU resume function */
+ b cpu_resume
+ENDPROC(omap3_restore)
+
+ .ltorg
/*
- * ==============================
- * == Exit point from OFF mode ==
- * ==============================
+ * Local variables
*/
-restoremmu_on:
- ldmfd sp!, {r0-r12, pc} @ restore regs and return
-
+pm_prepwstst_core_p:
+ .word PM_PREPWSTST_CORE_P
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sram_base:
+ .word SRAM_BASE_P + 0x8000
+control_stat:
+ .word CONTROL_STAT
+control_mem_rta:
+ .word CONTROL_MEM_RTA_CTRL
+l2dis_3630:
+ .word 0
/*
* Internal functions
*/
-/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
+/*
+ * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
+ * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
+ */
.text
.align 3
ENTRY(es3_sdrc_fix)
str r5, [r4] @ kick off refreshes
bx lr
+/*
+ * Local variables
+ */
.align
sdrc_syscfg:
.word SDRC_SYSCONFIG_P
ENDPROC(es3_sdrc_fix)
ENTRY(es3_sdrc_fix_sz)
.word . - es3_sdrc_fix
-
-/*
- * This function implements the erratum ID i581 WA:
- * SDRC state restore before accessing the SDRAM
- *
- * Only used at return from non-OFF mode. For OFF
- * mode the ROM code configures the SDRC and
- * the DPLL before calling the restore code directly
- * from DDR.
- */
-
-/* Make sure SDRC accesses are ok */
-wait_sdrc_ok:
-
-/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */
- ldr r4, cm_idlest_ckgen
-wait_dpll3_lock:
- ldr r5, [r4]
- tst r5, #1
- beq wait_dpll3_lock
-
- ldr r4, cm_idlest1_core
-wait_sdrc_ready:
- ldr r5, [r4]
- tst r5, #0x2
- bne wait_sdrc_ready
- /* allow DLL powerdown upon hw idle req */
- ldr r4, sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
-
-/*
- * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
- * base instead.
- * Be careful not to clobber r7 when maintaing this code.
- */
-
-is_dll_in_lock_mode:
- /* Is dll in lock mode? */
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- tst r5, #0x4
- bxne lr @ Return if locked
- /* wait till dll locks */
- adr r7, kick_counter
-wait_dll_lock_timed:
- ldr r4, wait_dll_lock_counter
- add r4, r4, #1
- str r4, [r7, #wait_dll_lock_counter - kick_counter]
- ldr r4, sdrc_dlla_status
- /* Wait 20uS for lock */
- mov r6, #8
-wait_dll_lock:
- subs r6, r6, #0x1
- beq kick_dll
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
- bne wait_dll_lock
- bx lr @ Return when locked
-
- /* disable/reenable DLL if not locked */
-kick_dll:
- ldr r4, sdrc_dlla_ctrl
- ldr r5, [r4]
- mov r6, r5
- bic r6, #(1<<3) @ disable dll
- str r6, [r4]
- dsb
- orr r6, r6, #(1<<3) @ enable dll
- str r6, [r4]
- dsb
- ldr r4, kick_counter
- add r4, r4, #1
- str r4, [r7] @ kick_counter
- b wait_dll_lock_timed
-
- .align
-cm_idlest1_core:
- .word CM_IDLEST1_CORE_V
-cm_idlest_ckgen:
- .word CM_IDLEST_CKGEN_V
-sdrc_dlla_status:
- .word SDRC_DLLA_STATUS_V
-sdrc_dlla_ctrl:
- .word SDRC_DLLA_CTRL_V
-pm_prepwstst_core_p:
- .word PM_PREPWSTST_CORE_P
-pm_pwstctrl_mpu:
- .word PM_PWSTCTRL_MPU_P
-scratchpad_base:
- .word SCRATCHPAD_BASE_P
-sram_base:
- .word SRAM_BASE_P + 0x8000
-sdrc_power:
- .word SDRC_POWER_V
-ttbrbit_mask:
- .word 0xFFFFC000
-table_index_mask:
- .word 0xFFF00000
-table_entry:
- .word 0x00000C02
-cache_pred_disable_mask:
- .word 0xFFFFE7FB
-control_stat:
- .word CONTROL_STAT
-control_mem_rta:
- .word CONTROL_MEM_RTA_CTRL
-kernel_flush:
- .word v7_flush_dcache_all
-l2dis_3630:
- .word 0
- /*
- * When exporting to userspace while the counters are in SRAM,
- * these 2 words need to be at the end to facilitate retrival!
- */
-kick_counter:
- .word 0
-wait_dll_lock_counter:
- .word 0
-ENDPROC(omap34xx_cpu_suspend)
-
-ENTRY(omap34xx_cpu_suspend_sz)
- .word . - omap34xx_cpu_suspend
1003:
.endm
-
- .macro irq_prio_table
- .endm
-
-
.init_irq = cmx2xx_init_irq,
.timer = &pxa_timer,
.init_machine = cmx2xx_init,
+#ifdef CONFIG_PCI
+ .dma_zone_size = SZ_64M,
+#endif
MACHINE_END
*/
#define PLAT_PHYS_OFFSET UL(0xa0000000)
-#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
-#define ARM_DMA_ZONE_SIZE SZ_64M
-#endif
-
#endif
extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
/* sleep.S */
-extern void pxa25x_cpu_suspend(unsigned int, long);
-extern void pxa27x_cpu_suspend(unsigned int, long);
+extern int pxa25x_finish_suspend(unsigned long);
+extern int pxa27x_finish_suspend(unsigned long);
extern int pxa_pm_enter(suspend_state_t state);
extern int pxa_pm_prepare(void);
#include <linux/i2c-gpio.h>
#include <asm/mach-types.h>
+#include <asm/suspend.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/* *** go zzz *** */
pxa_cpu_pm_fns->enter(state);
- cpu_init();
if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
/* after sleeping, validate the checksum */
#include <linux/irq.h>
#include <asm/mach/map.h>
+#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
switch (state) {
case PM_SUSPEND_MEM:
- pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend);
break;
}
}
#include <asm/mach/map.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <asm/suspend.h>
#include <mach/irqs.h>
#include <mach/gpio.h>
#include <mach/pxa27x.h>
void pxa27x_cpu_pm_enter(suspend_state_t state)
{
extern void pxa_cpu_standby(void);
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
+
+ asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
/* ensure voltage-change sequencer not initiated, which hangs */
PCFR &= ~PCFR_FVC;
pxa_cpu_standby();
break;
case PM_SUSPEND_MEM:
- pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(pwrmode, pxa27x_finish_suspend);
+#ifndef CONFIG_IWMMXT
+ asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
break;
}
}
#include <linux/i2c/pxa-i2c.h>
#include <asm/mach/map.h>
+#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/pxa3xx-regs.h>
{
volatile unsigned long *p = (volatile void *)0xc0000000;
unsigned long saved_data = *p;
+#ifndef CONFIG_IWMMXT
+ u64 acc0;
- extern void pxa3xx_cpu_suspend(long);
+ asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0));
+#endif
+
+ extern int pxa3xx_finish_suspend(unsigned long);
/* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */
CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM);
/* overwrite with the resume address */
*p = virt_to_phys(cpu_resume);
- pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(0, pxa3xx_finish_suspend);
*p = saved_data;
AD3ER = 0;
+
+#ifndef CONFIG_IWMMXT
+ asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0));
+#endif
}
static void pxa3xx_cpu_pm_enter(suspend_state_t state)
#ifdef CONFIG_PXA3xx
/*
- * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4)
- *
- * r0 = v:p offset
+ * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4)
*/
-ENTRY(pxa3xx_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
- mra r2, r3, acc0
-#endif
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r1, r0
- ldr r3, =pxa_cpu_resume @ resume function
- bl cpu_suspend
-
+ENTRY(pxa3xx_finish_suspend)
mov r0, #0x06 @ S2D3C4 mode
mcr p14, 0, r0, c7, c0, 0 @ enter sleep
#ifdef CONFIG_PXA27x
/*
- * pxa27x_cpu_suspend()
+ * pxa27x_finish_suspend()
*
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
*/
-ENTRY(pxa27x_cpu_suspend)
-
-#ifndef CONFIG_IWMMXT
- mra r2, r3, acc0
-#endif
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r4, r0 @ save sleep mode
- ldr r3, =pxa_cpu_resume @ resume function
- bl cpu_suspend
-
+ENTRY(pxa27x_finish_suspend)
@ Put the processor to sleep
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, r4 @ sleep mode
+ mov r1, r0 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
#ifdef CONFIG_PXA25x
/*
- * pxa25x_cpu_suspend()
+ * pxa25x_finish_suspend()
*
* Forces CPU into sleep state.
*
* r0 = value for PWRMODE M field for desired sleep state
- * r1 = v:p offset
*/
-ENTRY(pxa25x_cpu_suspend)
- stmfd sp!, {r2 - r12, lr} @ save registers on stack
- mov r4, r0 @ save sleep mode
- ldr r3, =pxa_cpu_resume @ resume function
- bl cpu_suspend
+ENTRY(pxa25x_finish_suspend)
@ prepare value for sleep mode
- mov r1, r4 @ sleep mode
+ mov r1, r0 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
mcr p14, 0, r1, c7, c0, 0 @ PWRMODE
20: b 20b @ loop waiting for sleep
-
-/*
- * pxa_cpu_resume()
- *
- * entry point from bootloader into kernel during resume
- */
- .align 5
-pxa_cpu_resume:
- ldmfd sp!, {r2, r3}
-#ifndef CONFIG_IWMMXT
- mar acc0, r2, r3
-#endif
- ldmfd sp!, {r4 - r12, pc} @ return to caller
#include <linux/can/platform/mcp251x.h>
#include <asm/mach-types.h>
+#include <asm/suspend.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
static void zeus_power_off(void)
{
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend);
}
#else
#define zeus_power_off NULL
bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S"
select CPU_V6
select ARM_GIC
+ select HAVE_TCM
help
Include support for the ARM(R) RealView(R) Platform Baseboard for
ARM1176JZF-S.
#define PLAT_PHYS_OFFSET UL(0x00000000)
#endif
-#ifdef CONFIG_ZONE_DMA
-#define ARM_DMA_ZONE_SIZE SZ_256M
-#endif
-
#ifdef CONFIG_SPARSEMEM
/*
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
scu_enable(scu_base_addr());
.init_irq = gic_init_irq,
.timer = &realview_eb_timer,
.init_machine = realview_eb_init,
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
MACHINE_END
.init_irq = gic_init_irq,
.timer = &realview_pb1176_timer,
.init_machine = realview_pb1176_init,
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
MACHINE_END
.init_irq = gic_init_irq,
.timer = &realview_pb11mp_timer,
.init_machine = realview_pb11mp_init,
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
MACHINE_END
.init_irq = gic_init_irq,
.timer = &realview_pba8_timer,
.init_machine = realview_pba8_init,
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
MACHINE_END
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
.init_machine = realview_pbx_init,
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
MACHINE_END
extern void s3c2412_sleep_enter(void);
-static void s3c2412_cpu_suspend(void)
+static int s3c2412_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
- flush_cache_all();
-
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
__raw_writel(tmp, S3C2412_PWRCFG);
s3c2412_sleep_enter();
+
+ panic("sleep resumed to originator?");
}
static void s3c2412_pm_prepare(void)
extern void s3c2412_sleep_enter(void);
-static void s3c2416_cpu_suspend(void)
+static int s3c2416_cpu_suspend(unsigned long arg)
{
- flush_cache_all();
-
/* enable wakeup sources regardless of battery state */
__raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG);
__raw_writel(0x2BED, S3C2443_PWRMODE);
s3c2412_sleep_enter();
+
+ panic("sleep resumed to originator?");
}
static void s3c2416_pm_prepare(void)
* this.
*/
-static void s3c64xx_cpu_suspend(void)
+static int s3c64xx_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
.text
- /* s3c_cpu_save
- *
- * Save enough processor state to allow the restart of the pm.c
- * code after resume.
- *
- * entry:
- * r1 = v:p offset
- */
-
-ENTRY(s3c_cpu_save)
- stmfd sp!, { r4 - r12, lr }
- ldr r3, =resume_with_mmu
- bl cpu_suspend
-
- @@ call final suspend code
- ldr r0, =pm_cpu_sleep
- ldr pc, [r0]
-
- @@ return to the caller, after the MMU is turned on.
- @@ restore the last bits of the stack and return.
-resume_with_mmu:
- ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
-
/* Sleep magic, the word before the resume entry point so that the
* bootloader can check for a resumeable image. */
SAVE_ITEM(S3C2410_TCNTO(0)),
};
-void s5pv210_cpu_suspend(void)
+void s5pv210_cpu_suspend(unsigned long arg)
{
unsigned long tmp;
.text
- /* s3c_cpu_save
- *
- * entry:
- * r1 = v:p offset
- */
-
-ENTRY(s3c_cpu_save)
-
- stmfd sp!, { r3 - r12, lr }
- ldr r3, =resume_with_mmu
- bl cpu_suspend
-
- ldr r0, =pm_cpu_sleep
- ldr r0, [ r0 ]
- mov pc, r0
-
-resume_with_mmu:
- ldmfd sp!, { r3 - r12, pc }
-
- .ltorg
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = assabet_init,
+#ifdef CONFIG_SA1111
+ .dma_zone_size = SZ_1M,
+#endif
MACHINE_END
.map_io = badge4_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
+#ifdef CONFIG_SA1111
+ .dma_zone_size = SZ_1M,
+#endif
MACHINE_END
*/
#define PLAT_PHYS_OFFSET UL(0xc0000000)
-#ifdef CONFIG_SA1111
-#define ARM_DMA_ZONE_SIZE SZ_1M
-#endif
-
/*
* Because of the wide memory address space between physical RAM banks on the
* SA1100, it's much convenient to use Linux's SparseMEM support to implement
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = jornada720_mach_init,
+#ifdef CONFIG_SA1111
+ .dma_zone_size = SZ_1M,
+#endif
MACHINE_END
#include <mach/hardware.h>
#include <asm/memory.h>
+#include <asm/suspend.h>
#include <asm/system.h>
#include <asm/mach/time.h>
-extern void sa1100_cpu_suspend(long);
+extern int sa1100_finish_suspend(unsigned long);
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
PSPR = virt_to_phys(cpu_resume);
/* go zzz */
- sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET);
-
- cpu_init();
+ cpu_suspend(0, sa1100_finish_suspend);
/*
* Ensure not to come back here if it wasn't intended
.text
/*
- * sa1100_cpu_suspend()
+ * sa1100_finish_suspend()
*
* Causes sa11x0 to enter sleep state
*
*/
-ENTRY(sa1100_cpu_suspend)
- stmfd sp!, {r4 - r12, lr} @ save registers on stack
- mov r1, r0
- ldr r3, =sa1100_cpu_resume @ return function
- bl cpu_suspend
-
+ENTRY(sa1100_finish_suspend)
@ disable clock switching
mcr p15, 0, r1, c15, c2, 2
str r13, [r12]
20: b 20b @ loop waiting for sleep
-
-/*
- * cpu_sa1100_resume()
- *
- * entry point from bootloader into kernel during resume
- */
- .align 5
-sa1100_cpu_resume:
- mcr p15, 0, r1, c15, c1, 2 @ enable clock switching
- ldmfd sp!, {r4 - r12, pc} @ return to caller
.map_io = shark_map_io,
.init_irq = shark_init_irq,
.timer = &shark_timer,
+ .dma_zone_size = SZ_4M,
MACHINE_END
.endm
.macro get_irqnr_preamble, base, tmp
+ mov \base, #0xe0000000
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- mov r4, #0xe0000000
mov \irqstat, #0x0C
- strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */
- ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7
+ strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */
+ ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 43f
teq \irqnr, #2
bne 44f
43: mov \irqstat, #0x0C
- strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
- ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8
+ strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */
+ ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8
and \irqstat, \irqnr, #0x80
teq \irqstat, #0
beq 44f
*/
#define PLAT_PHYS_OFFSET UL(0x08000000)
-#define ARM_DMA_ZONE_SIZE SZ_4M
-
/*
* Cache flushing area
*/
--- /dev/null
+#ifndef SDHI_SH7372_H
+#define SDHI_SH7372_H
+
+#define SDGENCNTA 0xfe40009c
+
+/* The countdown of SDGENCNTA is controlled by
+ * ZB3D2CLK which runs at 149.5MHz.
+ * That is 149.5ticks/us. Approximate this as 150ticks/us.
+ */
+static void udelay(int us)
+{
+ __raw_writel(us * 150, SDGENCNTA);
+ while(__raw_readl(SDGENCNTA)) ;
+}
+
+static void msleep(int ms)
+{
+ udelay(ms * 1000);
+}
+
+#endif
--- /dev/null
+#ifndef SDHI_H
+#define SDHI_H
+
+/**************************************************
+ *
+ * CPU specific settings
+ *
+ **************************************************/
+
+#ifdef CONFIG_ARCH_SH7372
+#include "mach/sdhi-sh7372.h"
+#else
+#error "unsupported CPU."
+#endif
+
+#endif /* SDHI_H */
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-
shmobile_smp_prepare_cpus();
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
scu_enable(scu_base);
}
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
-
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
scu_enable(scu_base_addr());
wakeup_secondary();
static void ct_ca9x4_smp_enable(unsigned int max_cpus)
{
- int i;
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
-
scu_enable(MMIO_P2V(A9_MPCORE_SCU));
}
#endif
/*
* Function: v4_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
ENTRY(v4_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- ldr r3, [r2] @ read aborted ARM instruction
+ ldr r3, [r4] @ read aborted ARM instruction
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r3, #1 << 20 @ L = 1 -> write?
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
-
-
+ b do_DataAbort
/*
* Function: v4t_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
ENTRY(v4t_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- do_thumb_abort
- ldreq r3, [r2] @ read aborted ARM instruction
+ do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+ ldreq r3, [r4] @ read aborted ARM instruction
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
tst r3, #1 << 20 @ check write
orreq r1, r1, #1 << 11
- mov pc, lr
+ b do_DataAbort
/*
* Function: v5t_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
ENTRY(v5t_early_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- do_thumb_abort
- ldreq r3, [r2] @ read aborted ARM instruction
+ do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+ ldreq r3, [r4] @ read aborted ARM instruction
bic r1, r1, #1 << 11 @ clear bits 11 of FSR
- do_ldrd_abort
+ do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ check write
orreq r1, r1, #1 << 11
- mov pc, lr
+ b do_DataAbort
/*
* Function: v5tj_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR
- tst r3, #PSR_J_BIT @ Java?
- movne pc, lr
- do_thumb_abort
- ldreq r3, [r2] @ read aborted ARM instruction
- do_ldrd_abort
+ tst r5, #PSR_J_BIT @ Java?
+ bne do_DataAbort
+ do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+ ldreq r3, [r4] @ read aborted ARM instruction
+ do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
-
-
+ b do_DataAbort
/*
* Function: v6_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
* The test below covers all the write situations, including Java bytecodes
*/
bic r1, r1, #1 << 11 @ clear bit 11 of FSR
- tst r3, #PSR_J_BIT @ Java?
- movne pc, lr
- do_thumb_abort
- ldreq r3, [r2] @ read aborted ARM instruction
+ tst r5, #PSR_J_BIT @ Java?
+ bne do_DataAbort
+ do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
+ ldreq r3, [r4] @ read aborted ARM instruction
#ifdef CONFIG_CPU_ENDIAN_BE8
reveq r3, r3
#endif
- do_ldrd_abort
+ do_ldrd_abort tmp=ip, insn=r3
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
-
-
+ b do_DataAbort
/*
* Function: v7_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
*/
ldr r3, =0x40d @ On permission fault
and r3, r1, r3
cmp r3, #0x0d
- movne pc, lr
+ bne do_DataAbort
mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR
isb
- mrc p15, 0, r2, c7, c4, 0 @ Read the PAR
- and r3, r2, #0x7b @ On translation fault
+ mrc p15, 0, ip, c7, c4, 0 @ Read the PAR
+ and r3, ip, #0x7b @ On translation fault
cmp r3, #0x0b
- movne pc, lr
+ bne do_DataAbort
bic r1, r1, #0xf @ Fix up FSR FS[5:0]
- and r2, r2, #0x7e
- orr r1, r1, r2, LSR #1
+ and ip, ip, #0x7e
+ orr r1, r1, ip, LSR #1
#endif
- mov pc, lr
+ b do_DataAbort
ENDPROC(v7_early_abort)
/*
* Function: v4t_late_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = address of abort
- * : r1 = FSR, bit 11 = write
- * : r2-r8 = corrupted
- * : r9 = preserved
- * : sp = pointer to registers
+ * Returns : r4-r5, r10-r11, r13 preserved
*
* Purpose : obtain information about current aborted instruction.
* Note: we read user space. This means we might cause a data
* picture. Unfortunately, this does happen. We live with it.
*/
ENTRY(v4t_late_abort)
- tst r3, #PSR_T_BIT @ check for thumb mode
+ tst r5, #PSR_T_BIT @ check for thumb mode
#ifdef CONFIG_CPU_CP15_MMU
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
mov r1, #0
#endif
bne .data_thumb_abort
- ldr r8, [r2] @ read arm instruction
+ ldr r8, [r4] @ read arm instruction
tst r8, #1 << 20 @ L = 1 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
-/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
-/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ b do_DataAbort @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
- mov r0, r2
+ mov r0, r4
mov r1, r8
- mov r2, sp
- bl baddataabort
- b ret_from_exception
+ b baddataabort
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
- and r2, r8, r7, lsl #1
- add r6, r6, r2, lsr #1
- and r2, r8, r7, lsl #2
- add r6, r6, r2, lsr #2
- and r2, r8, r7, lsl #3
- add r6, r6, r2, lsr #3
+ and r9, r8, r7, lsl #1
+ add r6, r6, r9, lsr #1
+ and r9, r8, r7, lsl #2
+ add r6, r6, r9, lsr #2
+ and r9, r8, r7, lsl #3
+ add r6, r6, r9, lsr #3
add r6, r6, r6, lsr #8
add r6, r6, r6, lsr #4
and r6, r6, #15 @ r6 = no. of registers to transfer.
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_lateldrhpre:
tst r8, #1 << 21 @ Check writeback bit
- moveq pc, lr @ No writeback -> no fixup
+ beq do_DataAbort @ No writeback -> no fixup
.data_arm_lateldrhpost:
- and r5, r8, #0x00f @ get Rm / low nibble of immediate value
+ and r9, r8, #0x00f @ get Rm / low nibble of immediate value
tst r8, #1 << 22 @ if (immediate offset)
andne r6, r8, #0xf00 @ { immediate high nibble
- orrne r6, r5, r6, lsr #4 @ combine nibbles } else
- ldreq r6, [sp, r5, lsl #2] @ { load Rm value }
+ orrne r6, r9, r6, lsr #4 @ combine nibbles } else
+ ldreq r6, [r2, r9, lsl #2] @ { load Rm value }
.data_arm_apply_r6_and_rn:
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostconst:
- movs r2, r8, lsl #20 @ Get offset
- moveq pc, lr @ zero -> no fixup
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ movs r6, r8, lsl #20 @ Get offset
+ beq do_DataAbort @ zero -> no fixup
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
- subne r7, r7, r2, lsr #20 @ Undo increment
- addeq r7, r7, r2, lsr #20 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ subne r7, r7, r6, lsr #20 @ Undo increment
+ addeq r7, r7, r6, lsr #20 @ Undo decrement
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
- ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
- mov r5, r8, lsr #7 @ get shift count
- ands r5, r5, #31
+ ldr r6, [r2, r7, lsl #2] @ Get register 'Rm'
+ mov r9, r8, lsr #7 @ get shift count
+ ands r9, r9, #31
and r7, r8, #0x70 @ get shift type
orreq r7, r7, #8 @ shift count = 0
add pc, pc, r7
nop
- mov r6, r6, lsl r5 @ 0: LSL #!0
+ mov r6, r6, lsl r9 @ 0: LSL #!0
b .data_arm_apply_r6_and_rn
b .data_arm_apply_r6_and_rn @ 1: LSL #0
nop
nop
b .data_unknown @ 3: MUL?
nop
- mov r6, r6, lsr r5 @ 4: LSR #!0
+ mov r6, r6, lsr r9 @ 4: LSR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, lsr #32 @ 5: LSR #32
b .data_arm_apply_r6_and_rn
nop
b .data_unknown @ 7: MUL?
nop
- mov r6, r6, asr r5 @ 8: ASR #!0
+ mov r6, r6, asr r9 @ 8: ASR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, asr #32 @ 9: ASR #32
b .data_arm_apply_r6_and_rn
nop
b .data_unknown @ B: MUL?
nop
- mov r6, r6, ror r5 @ C: ROR #!0
+ mov r6, r6, ror r9 @ C: ROR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, rrx @ D: RRX
b .data_arm_apply_r6_and_rn
b .data_unknown @ F: MUL?
.data_thumb_abort:
- ldrh r8, [r2] @ read instruction
+ ldrh r8, [r4] @ read instruction
tst r8, #1 << 11 @ L = 1 -> write?
orreq r1, r1, #1 << 8 @ yes
and r7, r8, #15 << 12
/* 3 */ b .data_unknown
/* 4 */ b .data_unknown
/* 5 */ b .data_thumb_reg
-/* 6 */ mov pc, lr
-/* 7 */ mov pc, lr
-/* 8 */ mov pc, lr
-/* 9 */ mov pc, lr
+/* 6 */ b do_DataAbort
+/* 7 */ b do_DataAbort
+/* 8 */ b do_DataAbort
+/* 9 */ b do_DataAbort
/* A */ b .data_unknown
/* B */ b .data_thumb_pushpop
/* C */ b .data_thumb_ldmstm
.data_thumb_reg:
tst r8, #1 << 9
- moveq pc, lr
+ beq do_DataAbort
tst r8, #1 << 10 @ If 'S' (signed) bit is set
movne r1, #0 @ it must be a load instr
- mov pc, lr
+ b do_DataAbort
.data_thumb_pushpop:
tst r8, #1 << 10
beq .data_unknown
and r6, r8, #0x55 @ hweight8(r8) + R bit
- and r2, r8, #0xaa
- add r6, r6, r2, lsr #1
- and r2, r6, #0xcc
+ and r9, r8, #0xaa
+ add r6, r6, r9, lsr #1
+ and r9, r6, #0xcc
and r6, r6, #0x33
- add r6, r6, r2, lsr #2
+ add r6, r6, r9, lsr #2
movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit)
adc r6, r6, r6, lsr #4 @ high + low nibble + R bit
and r6, r6, #15 @ number of regs to transfer
- ldr r7, [sp, #13 << 2]
+ ldr r7, [r2, #13 << 2]
tst r8, #1 << 11
addeq r7, r7, r6, lsl #2 @ increment SP if PUSH
subne r7, r7, r6, lsl #2 @ decrement SP if POP
- str r7, [sp, #13 << 2]
- mov pc, lr
+ str r7, [r2, #13 << 2]
+ b do_DataAbort
.data_thumb_ldmstm:
and r6, r8, #0x55 @ hweight8(r8)
- and r2, r8, #0xaa
- add r6, r6, r2, lsr #1
- and r2, r6, #0xcc
+ and r9, r8, #0xaa
+ add r6, r6, r9, lsr #1
+ and r9, r6, #0xcc
and r6, r6, #0x33
- add r6, r6, r2, lsr #2
+ add r6, r6, r9, lsr #2
add r6, r6, r6, lsr #4
- and r5, r8, #7 << 8
- ldr r7, [sp, r5, lsr #6]
+ and r9, r8, #7 << 8
+ ldr r7, [r2, r9, lsr #6]
and r6, r6, #15 @ number of regs to transfer
sub r7, r7, r6, lsl #2 @ always decrement
- str r7, [sp, r5, lsr #6]
- mov pc, lr
+ str r7, [r2, r9, lsr #6]
+ b do_DataAbort
*
*/
- .macro do_thumb_abort
- tst r3, #PSR_T_BIT
+ .macro do_thumb_abort, fsr, pc, psr, tmp
+ tst \psr, #PSR_T_BIT
beq not_thumb
- ldrh r3, [r2] @ Read aborted Thumb instruction
- and r3, r3, # 0xfe00 @ Mask opcode field
- cmp r3, # 0x5600 @ Is it ldrsb?
- orreq r3, r3, #1 << 11 @ Set L-bit if yes
- tst r3, #1 << 11 @ L = 0 -> write
- orreq r1, r1, #1 << 11 @ yes.
- mov pc, lr
+ ldrh \tmp, [\pc] @ Read aborted Thumb instruction
+ and \tmp, \tmp, # 0xfe00 @ Mask opcode field
+ cmp \tmp, # 0x5600 @ Is it ldrsb?
+ orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes
+ tst \tmp, #1 << 11 @ L = 0 -> write
+ orreq \psr, \psr, #1 << 11 @ yes.
+ b do_DataAbort
not_thumb:
.endm
/*
- * We check for the following insturction encoding for LDRD.
+ * We check for the following instruction encoding for LDRD.
*
- * [27:25] == 0
+ * [27:25] == 000
* [7:4] == 1101
* [20] == 0
*/
- .macro do_ldrd_abort
- tst r3, #0x0e000000 @ [27:25] == 0
+ .macro do_ldrd_abort, tmp, insn
+ tst \insn, #0x0e100000 @ [27:25,20] == 0
bne not_ldrd
- and r2, r3, #0x000000f0 @ [7:4] == 1101
- cmp r2, #0x000000d0
- bne not_ldrd
- tst r3, #1 << 20 @ [20] == 0
- moveq pc, lr
+ and \tmp, \insn, #0x000000f0 @ [7:4] == 1101
+ cmp \tmp, #0x000000d0
+ beq do_DataAbort
not_ldrd:
.endm
/*
* Function: nommu_early_abort
*
- * Params : r2 = address of aborted instruction
- * : r3 = saved SPSR
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
- * Returns : r0 = 0 (abort address)
- * : r1 = 0 (FSR)
+ * Returns : r4 - r11, r13 preserved
*
* Note: There is no FSR/FAR on !CPU_CP15_MMU cores.
* Just fill zero into the registers.
ENTRY(nommu_early_abort)
mov r0, #0 @ clear r0, r1 (no FSR/FAR)
mov r1, #0
- mov pc, lr
+ b do_DataAbort
ENDPROC(nommu_early_abort)
int isize = 4;
int thumb2_32b = 0;
+ if (interrupts_enabled(regs))
+ local_irq_enable();
+
instrptr = instruction_pointer(regs);
fs = get_fs();
__INITDATA
- .type fa_cache_fns, #object
-ENTRY(fa_cache_fns)
- .long fa_flush_icache_all
- .long fa_flush_kern_cache_all
- .long fa_flush_user_cache_all
- .long fa_flush_user_cache_range
- .long fa_coherent_kern_range
- .long fa_coherent_user_range
- .long fa_flush_kern_dcache_area
- .long fa_dma_map_area
- .long fa_dma_unmap_area
- .long fa_dma_flush_range
- .size fa_cache_fns, . - fa_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions fa
__INITDATA
- .type v3_cache_fns, #object
-ENTRY(v3_cache_fns)
- .long v3_flush_icache_all
- .long v3_flush_kern_cache_all
- .long v3_flush_user_cache_all
- .long v3_flush_user_cache_range
- .long v3_coherent_kern_range
- .long v3_coherent_user_range
- .long v3_flush_kern_dcache_area
- .long v3_dma_map_area
- .long v3_dma_unmap_area
- .long v3_dma_flush_range
- .size v3_cache_fns, . - v3_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v3
__INITDATA
- .type v4_cache_fns, #object
-ENTRY(v4_cache_fns)
- .long v4_flush_icache_all
- .long v4_flush_kern_cache_all
- .long v4_flush_user_cache_all
- .long v4_flush_user_cache_range
- .long v4_coherent_kern_range
- .long v4_coherent_user_range
- .long v4_flush_kern_dcache_area
- .long v4_dma_map_area
- .long v4_dma_unmap_area
- .long v4_dma_flush_range
- .size v4_cache_fns, . - v4_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v4
__INITDATA
- .type v4wb_cache_fns, #object
-ENTRY(v4wb_cache_fns)
- .long v4wb_flush_icache_all
- .long v4wb_flush_kern_cache_all
- .long v4wb_flush_user_cache_all
- .long v4wb_flush_user_cache_range
- .long v4wb_coherent_kern_range
- .long v4wb_coherent_user_range
- .long v4wb_flush_kern_dcache_area
- .long v4wb_dma_map_area
- .long v4wb_dma_unmap_area
- .long v4wb_dma_flush_range
- .size v4wb_cache_fns, . - v4wb_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v4wb
__INITDATA
- .type v4wt_cache_fns, #object
-ENTRY(v4wt_cache_fns)
- .long v4wt_flush_icache_all
- .long v4wt_flush_kern_cache_all
- .long v4wt_flush_user_cache_all
- .long v4wt_flush_user_cache_range
- .long v4wt_coherent_kern_range
- .long v4wt_coherent_user_range
- .long v4wt_flush_kern_dcache_area
- .long v4wt_dma_map_area
- .long v4wt_dma_unmap_area
- .long v4wt_dma_flush_range
- .size v4wt_cache_fns, . - v4wt_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v4wt
__INITDATA
- .type v6_cache_fns, #object
-ENTRY(v6_cache_fns)
- .long v6_flush_icache_all
- .long v6_flush_kern_cache_all
- .long v6_flush_user_cache_all
- .long v6_flush_user_cache_range
- .long v6_coherent_kern_range
- .long v6_coherent_user_range
- .long v6_flush_kern_dcache_area
- .long v6_dma_map_area
- .long v6_dma_unmap_area
- .long v6_dma_flush_range
- .size v6_cache_fns, . - v6_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v6
__INITDATA
- .type v7_cache_fns, #object
-ENTRY(v7_cache_fns)
- .long v7_flush_icache_all
- .long v7_flush_kern_cache_all
- .long v7_flush_user_cache_all
- .long v7_flush_user_cache_range
- .long v7_coherent_kern_range
- .long v7_coherent_user_range
- .long v7_flush_kern_dcache_area
- .long v7_dma_map_area
- .long v7_dma_unmap_area
- .long v7_dma_flush_range
- .size v7_cache_fns, . - v7_cache_fns
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions v7
kfrom = kmap_atomic(from, KM_USER0);
kto = kmap_atomic(to, KM_USER1);
copy_page(kto, kfrom);
- __cpuc_flush_dcache_area(kto, PAGE_SIZE);
kunmap_atomic(kto, KM_USER1);
kunmap_atomic(kfrom, KM_USER0);
}
#include <asm/tlbflush.h>
#include <asm/sizes.h>
+#include "mm.h"
+
static u64 get_coherent_dma_mask(struct device *dev)
{
- u64 mask = ISA_DMA_THRESHOLD;
+ u64 mask = (u64)arm_dma_limit;
if (dev) {
mask = dev->coherent_dma_mask;
return 0;
}
- if ((~mask) & ISA_DMA_THRESHOLD) {
+ if ((~mask) & (u64)arm_dma_limit) {
dev_warn(dev, "coherent DMA mask %#llx is smaller "
"than system GFP_DMA mask %#llx\n",
- mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ mask, (u64)arm_dma_limit);
return 0;
}
}
}
EXPORT_SYMBOL(dma_sync_sg_for_device);
+/*
+ * Return whether the given device DMA address mask can be supported
+ * properly. For example, if your device can only drive the low 24-bits
+ * during bus mastering, then you would pass 0x00ffffff as the mask
+ * to this function.
+ */
+int dma_supported(struct device *dev, u64 mask)
+{
+ if (mask < (u64)arm_dma_limit)
+ return 0;
+ return 1;
+}
+EXPORT_SYMBOL(dma_supported);
+
+int dma_set_mask(struct device *dev, u64 dma_mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, dma_mask))
+ return -EIO;
+
+#ifndef CONFIG_DMABOUNCE
+ *dev->dma_mask = dma_mask;
+#endif
+
+ return 0;
+}
+EXPORT_SYMBOL(dma_set_mask);
+
#define PREALLOC_DMA_DEBUG_ENTRIES 4096
static int __init dma_debug_do_init(void)
pud = pud_offset(pgd, addr);
if (PTRS_PER_PUD != 1)
- printk(", *pud=%08lx", pud_val(*pud));
+ printk(", *pud=%08llx", (long long)pud_val(*pud));
if (pud_none(*pud))
break;
tsk = current;
mm = tsk->mm;
+ /* Enable interrupts if they were enabled in the parent context. */
+ if (interrupts_enabled(regs))
+ local_irq_enable();
+
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
}
#ifdef CONFIG_ZONE_DMA
+
+unsigned long arm_dma_zone_size __read_mostly;
+EXPORT_SYMBOL(arm_dma_zone_size);
+
+/*
+ * The DMA mask corresponding to the maximum bus address allocatable
+ * using GFP_DMA. The default here places no restriction on DMA
+ * allocations. This must be the smallest DMA mask in the system,
+ * so a successful GFP_DMA allocation will always satisfy this.
+ */
+u32 arm_dma_limit;
+
static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
unsigned long dma_size)
{
#endif
}
-#ifdef ARM_DMA_ZONE_SIZE
-#ifndef CONFIG_ZONE_DMA
-#error ARM_DMA_ZONE_SIZE set but no DMA zone to limit allocations
-#endif
-
+#ifdef CONFIG_ZONE_DMA
/*
* Adjust the sizes according to any special requirements for
* this machine type.
*/
- arm_adjust_dma_zone(zone_size, zhole_size,
- ARM_DMA_ZONE_SIZE >> PAGE_SHIFT);
+ if (arm_dma_zone_size) {
+ arm_adjust_dma_zone(zone_size, zhole_size,
+ arm_dma_zone_size >> PAGE_SHIFT);
+ arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1;
+ } else
+ arm_dma_limit = 0xffffffff;
#endif
free_area_init_node(0, zone_size, min, zhole_size);
return pages;
}
+/*
+ * Poison init memory with an undefined instruction (ARM) or a branch to an
+ * undefined instruction (Thumb).
+ */
+static inline void poison_init_mem(void *s, size_t count)
+{
+ u32 *p = (u32 *)s;
+ while ((count = count - 4))
+ *p++ = 0xe7fddef0;
+}
+
static inline void
free_memmap(unsigned long start_pfn, unsigned long end_pfn)
{
" pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n"
#endif
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
- " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .text : 0x%p" " - 0x%p" " (%4d kB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
" .data : 0x%p" " - 0x%p" " (%4d kB)\n"
" .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
#endif
MLM(MODULES_VADDR, MODULES_END),
- MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_text, _etext),
+ MLK_ROUNDUP(__init_begin, __init_end),
MLK_ROUNDUP(_sdata, _edata),
MLK_ROUNDUP(__bss_start, __bss_stop));
#ifdef CONFIG_HAVE_TCM
extern char __tcm_start, __tcm_end;
+ poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start);
totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)),
__phys_to_pfn(__pa(&__tcm_end)),
"TCM link");
#endif
+ poison_init_mem(__init_begin, __init_end - __init_begin);
if (!machine_is_integrator() && !machine_is_cintegrator())
totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
__phys_to_pfn(__pa(__init_end)),
void free_initrd_mem(unsigned long start, unsigned long end)
{
- if (!keep_initrd)
+ if (!keep_initrd) {
+ poison_init_mem((void *)start, PAGE_ALIGN(end) - start);
totalram_pages += free_area(__phys_to_pfn(__pa(start)),
__phys_to_pfn(__pa(end)),
"initrd");
+ }
}
static int __init keepinitrd_setup(char *__unused)
#endif
+#ifdef CONFIG_ZONE_DMA
+extern u32 arm_dma_limit;
+#else
+#define arm_dma_limit ((u32)~0)
+#endif
+
void __init bootmem_init(void);
void arm_mm_memblock_reserve(void);
/*
* Function: legacy_pabort
*
- * Params : r0 = address of aborted instruction
+ * Params : r2 = pt_regs
+ * : r4 = address of aborted instruction
+ * : r5 = psr for parent context
*
- * Returns : r0 = address of abort
- * : r1 = Simulated IFSR with section translation fault status
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current prefetch abort.
*/
.align 5
ENTRY(legacy_pabort)
+ mov r0, r4
mov r1, #5
- mov pc, lr
+ b do_PrefetchAbort
ENDPROC(legacy_pabort)
/*
* Function: v6_pabort
*
- * Params : r0 = address of aborted instruction
+ * Params : r2 = pt_regs
+ * : r4 = address of aborted instruction
+ * : r5 = psr for parent context
*
- * Returns : r0 = address of abort
- * : r1 = IFSR
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current prefetch abort.
*/
.align 5
ENTRY(v6_pabort)
+ mov r0, r4
mrc p15, 0, r1, c5, c0, 1 @ get IFSR
- mov pc, lr
+ b do_PrefetchAbort
ENDPROC(v6_pabort)
#include <asm/assembler.h>
/*
- * Function: v6_pabort
+ * Function: v7_pabort
*
- * Params : r0 = address of aborted instruction
+ * Params : r2 = pt_regs
+ * : r4 = address of aborted instruction
+ * : r5 = psr for parent context
*
- * Returns : r0 = address of abort
- * : r1 = IFSR
+ * Returns : r4 - r11, r13 preserved
*
* Purpose : obtain information about current prefetch abort.
*/
ENTRY(v7_pabort)
mrc p15, 0, r0, c6, c0, 2 @ get IFAR
mrc p15, 0, r1, c5, c0, 1 @ get IFSR
- mov pc, lr
+ b do_PrefetchAbort
ENDPROC(v7_pabort)
mov pc, lr
ENDPROC(arm1020_dma_unmap_area)
-ENTRY(arm1020_cache_fns)
- .long arm1020_flush_icache_all
- .long arm1020_flush_kern_cache_all
- .long arm1020_flush_user_cache_all
- .long arm1020_flush_user_cache_range
- .long arm1020_coherent_kern_range
- .long arm1020_coherent_user_range
- .long arm1020_flush_kern_dcache_area
- .long arm1020_dma_map_area
- .long arm1020_dma_unmap_area
- .long arm1020_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm1020
.align 5
ENTRY(cpu_arm1020_dcache_clean_area)
crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm1020, dabort=v4t_early_abort, pabort=legacy_pabort
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm1020_processor_functions, #object
-arm1020_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm1020_proc_init
- .word cpu_arm1020_proc_fin
- .word cpu_arm1020_reset
- .word cpu_arm1020_do_idle
- .word cpu_arm1020_dcache_clean_area
- .word cpu_arm1020_switch_mm
- .word cpu_arm1020_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm1020_processor_functions, . - arm1020_processor_functions
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
+ string cpu_arch_name, "armv5t"
+ string cpu_elf_name, "v5"
.type cpu_arm1020_name, #object
cpu_arm1020_name:
mov pc, lr
ENDPROC(arm1020e_dma_unmap_area)
-ENTRY(arm1020e_cache_fns)
- .long arm1020e_flush_icache_all
- .long arm1020e_flush_kern_cache_all
- .long arm1020e_flush_user_cache_all
- .long arm1020e_flush_user_cache_range
- .long arm1020e_coherent_kern_range
- .long arm1020e_coherent_user_range
- .long arm1020e_flush_kern_dcache_area
- .long arm1020e_dma_map_area
- .long arm1020e_dma_unmap_area
- .long arm1020e_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm1020e
.align 5
ENTRY(cpu_arm1020e_dcache_clean_area)
crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm1020e_processor_functions, #object
-arm1020e_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm1020e_proc_init
- .word cpu_arm1020e_proc_fin
- .word cpu_arm1020e_reset
- .word cpu_arm1020e_do_idle
- .word cpu_arm1020e_dcache_clean_area
- .word cpu_arm1020e_switch_mm
- .word cpu_arm1020e_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm1020e_processor_functions, . - arm1020e_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm1020e, dabort=v4t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm1020e_name, #object
-cpu_arm1020e_name:
- .asciz "ARM1020E"
- .size cpu_arm1020e_name, . - cpu_arm1020e_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_arm1020e_name, "ARM1020E"
.align
mov pc, lr
ENDPROC(arm1022_dma_unmap_area)
-ENTRY(arm1022_cache_fns)
- .long arm1022_flush_icache_all
- .long arm1022_flush_kern_cache_all
- .long arm1022_flush_user_cache_all
- .long arm1022_flush_user_cache_range
- .long arm1022_coherent_kern_range
- .long arm1022_coherent_user_range
- .long arm1022_flush_kern_dcache_area
- .long arm1022_dma_map_area
- .long arm1022_dma_unmap_area
- .long arm1022_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm1022
.align 5
ENTRY(cpu_arm1022_dcache_clean_area)
crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm1022_processor_functions, #object
-arm1022_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm1022_proc_init
- .word cpu_arm1022_proc_fin
- .word cpu_arm1022_reset
- .word cpu_arm1022_do_idle
- .word cpu_arm1022_dcache_clean_area
- .word cpu_arm1022_switch_mm
- .word cpu_arm1022_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm1022_processor_functions, . - arm1022_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm1022_name, #object
-cpu_arm1022_name:
- .asciz "ARM1022"
- .size cpu_arm1022_name, . - cpu_arm1022_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_arm1022_name, "ARM1022"
.align
mov pc, lr
ENDPROC(arm1026_dma_unmap_area)
-ENTRY(arm1026_cache_fns)
- .long arm1026_flush_icache_all
- .long arm1026_flush_kern_cache_all
- .long arm1026_flush_user_cache_all
- .long arm1026_flush_user_cache_range
- .long arm1026_coherent_kern_range
- .long arm1026_coherent_user_range
- .long arm1026_flush_kern_dcache_area
- .long arm1026_dma_map_area
- .long arm1026_dma_unmap_area
- .long arm1026_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm1026
.align 5
ENTRY(cpu_arm1026_dcache_clean_area)
crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm1026_processor_functions, #object
-arm1026_processor_functions:
- .word v5t_early_abort
- .word legacy_pabort
- .word cpu_arm1026_proc_init
- .word cpu_arm1026_proc_fin
- .word cpu_arm1026_reset
- .word cpu_arm1026_do_idle
- .word cpu_arm1026_dcache_clean_area
- .word cpu_arm1026_switch_mm
- .word cpu_arm1026_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm1026_processor_functions, . - arm1026_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm1026, dabort=v5t_early_abort, pabort=legacy_pabort
.section .rodata
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5tej"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
+ string cpu_arch_name, "armv5tej"
+ string cpu_elf_name, "v5"
.align
-
- .type cpu_arm1026_name, #object
-cpu_arm1026_name:
- .asciz "ARM1026EJ-S"
- .size cpu_arm1026_name, . - cpu_arm1026_name
-
+ string cpu_arm1026_name, "ARM1026EJ-S"
.align
.section ".proc.info.init", #alloc, #execinstr
/*
* Function: arm6_7_data_abort ()
*
- * Params : r2 = address of aborted instruction
- * : sp = pointer to registers
+ * Params : r2 = pt_regs
+ * : r4 = aborted context pc
+ * : r5 = aborted context psr
*
* Purpose : obtain information about current aborted instruction
*
- * Returns : r0 = address of abort
- * : r1 = FSR
+ * Returns : r4-r5, r10-r11, r13 preserved
*/
ENTRY(cpu_arm7_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- ldr r8, [r2] @ read arm instruction
+ ldr r8, [r4] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #15 << 24
nop
/* 0 */ b .data_unknown
-/* 1 */ mov pc, lr @ swp
+/* 1 */ b do_DataAbort @ swp
/* 2 */ b .data_unknown
/* 3 */ b .data_unknown
/* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m
/* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist>
/* a */ b .data_unknown
/* b */ b .data_unknown
-/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
-/* d */ mov pc, lr @ ldc rd, [rn, #m]
+/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m
+/* d */ b do_DataAbort @ ldc rd, [rn, #m]
/* e */ b .data_unknown
/* f */
.data_unknown: @ Part of jumptable
- mov r0, r2
+ mov r0, r4
mov r1, r8
- mov r2, sp
- bl baddataabort
- b ret_from_exception
+ b baddataabort
ENTRY(cpu_arm6_data_abort)
mrc p15, 0, r1, c5, c0, 0 @ get FSR
mrc p15, 0, r0, c6, c0, 0 @ get FAR
- ldr r8, [r2] @ read arm instruction
+ ldr r8, [r4] @ read arm instruction
tst r8, #1 << 20 @ L = 0 -> write?
orreq r1, r1, #1 << 11 @ yes.
and r7, r8, #14 << 24
teq r7, #8 << 24 @ was it ldm/stm
- movne pc, lr
+ bne do_DataAbort
.data_arm_ldmstm:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
mov r7, #0x11
orr r7, r7, #0x1100
and r6, r8, r7
- and r2, r8, r7, lsl #1
- add r6, r6, r2, lsr #1
- and r2, r8, r7, lsl #2
- add r6, r6, r2, lsr #2
- and r2, r8, r7, lsl #3
- add r6, r6, r2, lsr #3
+ and r9, r8, r7, lsl #1
+ add r6, r6, r9, lsr #1
+ and r9, r8, r7, lsl #2
+ add r6, r6, r9, lsr #2
+ and r9, r8, r7, lsl #3
+ add r6, r6, r9, lsr #3
add r6, r6, r6, lsr #8
add r6, r6, r6, lsr #4
and r6, r6, #15 @ r6 = no. of registers to transfer.
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6, lsl #2 @ Undo increment
addeq r7, r7, r6, lsl #2 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_apply_r6_and_rn:
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
subne r7, r7, r6 @ Undo incrmenet
addeq r7, r7, r6 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_lateldrpreconst:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostconst:
- movs r2, r8, lsl #20 @ Get offset
- moveq pc, lr @ zero -> no fixup
- and r5, r8, #15 << 16 @ Extract 'n' from instruction
- ldr r7, [sp, r5, lsr #14] @ Get register 'Rn'
+ movs r6, r8, lsl #20 @ Get offset
+ beq do_DataAbort @ zero -> no fixup
+ and r9, r8, #15 << 16 @ Extract 'n' from instruction
+ ldr r7, [r2, r9, lsr #14] @ Get register 'Rn'
tst r8, #1 << 23 @ Check U bit
- subne r7, r7, r2, lsr #20 @ Undo increment
- addeq r7, r7, r2, lsr #20 @ Undo decrement
- str r7, [sp, r5, lsr #14] @ Put register 'Rn'
- mov pc, lr
+ subne r7, r7, r6, lsr #20 @ Undo increment
+ addeq r7, r7, r6, lsr #20 @ Undo decrement
+ str r7, [r2, r9, lsr #14] @ Put register 'Rn'
+ b do_DataAbort
.data_arm_lateldrprereg:
tst r8, #1 << 21 @ check writeback bit
- moveq pc, lr @ no writeback -> no fixup
+ beq do_DataAbort @ no writeback -> no fixup
.data_arm_lateldrpostreg:
and r7, r8, #15 @ Extract 'm' from instruction
- ldr r6, [sp, r7, lsl #2] @ Get register 'Rm'
- mov r5, r8, lsr #7 @ get shift count
- ands r5, r5, #31
+ ldr r6, [r2, r7, lsl #2] @ Get register 'Rm'
+ mov r9, r8, lsr #7 @ get shift count
+ ands r9, r9, #31
and r7, r8, #0x70 @ get shift type
orreq r7, r7, #8 @ shift count = 0
add pc, pc, r7
nop
- mov r6, r6, lsl r5 @ 0: LSL #!0
+ mov r6, r6, lsl r9 @ 0: LSL #!0
b .data_arm_apply_r6_and_rn
b .data_arm_apply_r6_and_rn @ 1: LSL #0
nop
nop
b .data_unknown @ 3: MUL?
nop
- mov r6, r6, lsr r5 @ 4: LSR #!0
+ mov r6, r6, lsr r9 @ 4: LSR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, lsr #32 @ 5: LSR #32
b .data_arm_apply_r6_and_rn
nop
b .data_unknown @ 7: MUL?
nop
- mov r6, r6, asr r5 @ 8: ASR #!0
+ mov r6, r6, asr r9 @ 8: ASR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, asr #32 @ 9: ASR #32
b .data_arm_apply_r6_and_rn
nop
b .data_unknown @ B: MUL?
nop
- mov r6, r6, ror r5 @ C: ROR #!0
+ mov r6, r6, ror r9 @ C: ROR #!0
b .data_arm_apply_r6_and_rn
mov r6, r6, rrx @ D: RRX
b .data_arm_apply_r6_and_rn
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm6_processor_functions, #object
-ENTRY(arm6_processor_functions)
- .word cpu_arm6_data_abort
- .word legacy_pabort
- .word cpu_arm6_proc_init
- .word cpu_arm6_proc_fin
- .word cpu_arm6_reset
- .word cpu_arm6_do_idle
- .word cpu_arm6_dcache_clean_area
- .word cpu_arm6_switch_mm
- .word cpu_arm6_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm6_processor_functions, . - arm6_processor_functions
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm7_processor_functions, #object
-ENTRY(arm7_processor_functions)
- .word cpu_arm7_data_abort
- .word legacy_pabort
- .word cpu_arm7_proc_init
- .word cpu_arm7_proc_fin
- .word cpu_arm7_reset
- .word cpu_arm7_do_idle
- .word cpu_arm7_dcache_clean_area
- .word cpu_arm7_switch_mm
- .word cpu_arm7_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm7_processor_functions, . - arm7_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm6, dabort=cpu_arm6_data_abort, pabort=legacy_pabort
+ define_processor_functions arm7, dabort=cpu_arm7_data_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name: .asciz "armv3"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name: .asciz "v3"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm6_name, #object
-cpu_arm6_name: .asciz "ARM6"
- .size cpu_arm6_name, . - cpu_arm6_name
-
- .type cpu_arm610_name, #object
-cpu_arm610_name:
- .asciz "ARM610"
- .size cpu_arm610_name, . - cpu_arm610_name
-
- .type cpu_arm7_name, #object
-cpu_arm7_name: .asciz "ARM7"
- .size cpu_arm7_name, . - cpu_arm7_name
-
- .type cpu_arm710_name, #object
-cpu_arm710_name:
- .asciz "ARM710"
- .size cpu_arm710_name, . - cpu_arm710_name
+ string cpu_arch_name, "armv3"
+ string cpu_elf_name, "v3"
+ string cpu_arm6_name, "ARM6"
+ string cpu_arm610_name, "ARM610"
+ string cpu_arm7_name, "ARM7"
+ string cpu_arm710_name, "ARM710"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __arm6_proc_info, #object
-__arm6_proc_info:
- .long 0x41560600
- .long 0xfffffff0
- .long 0x00000c1e
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm6_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_26BIT
- .long cpu_arm6_name
- .long arm6_processor_functions
- .long v3_tlb_fns
- .long v3_user_fns
- .long v3_cache_fns
- .size __arm6_proc_info, . - __arm6_proc_info
-
- .type __arm610_proc_info, #object
-__arm610_proc_info:
- .long 0x41560610
- .long 0xfffffff0
- .long 0x00000c1e
+.macro arm67_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
+ cpu_mm_mmu_flags:req, cpu_flush:req, cpu_proc_funcs:req
+ .type __\name\()_proc_info, #object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
+ .long \cpu_mm_mmu_flags
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __arm6_setup
+ b \cpu_flush
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_26BIT
- .long cpu_arm610_name
- .long arm6_processor_functions
+ .long \cpu_name
+ .long \cpu_proc_funcs
.long v3_tlb_fns
.long v3_user_fns
.long v3_cache_fns
- .size __arm610_proc_info, . - __arm610_proc_info
-
- .type __arm7_proc_info, #object
-__arm7_proc_info:
- .long 0x41007000
- .long 0xffffff00
- .long 0x00000c1e
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm7_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_26BIT
- .long cpu_arm7_name
- .long arm7_processor_functions
- .long v3_tlb_fns
- .long v3_user_fns
- .long v3_cache_fns
- .size __arm7_proc_info, . - __arm7_proc_info
-
- .type __arm710_proc_info, #object
-__arm710_proc_info:
- .long 0x41007100
- .long 0xfff8ff00
- .long PMD_TYPE_SECT | \
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
+
+ arm67_proc_info arm6, 0x41560600, 0xfffffff0, cpu_arm6_name, \
+ 0x00000c1e, __arm6_setup, arm6_processor_functions
+ arm67_proc_info arm610, 0x41560610, 0xfffffff0, cpu_arm610_name, \
+ 0x00000c1e, __arm6_setup, arm6_processor_functions
+ arm67_proc_info arm7, 0x41007000, 0xffffff00, cpu_arm7_name, \
+ 0x00000c1e, __arm7_setup, arm7_processor_functions
+ arm67_proc_info arm710, 0x41007100, 0xfff8ff00, cpu_arm710_name, \
+ PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm7_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_26BIT
- .long cpu_arm710_name
- .long arm7_processor_functions
- .long v3_tlb_fns
- .long v3_user_fns
- .long v3_cache_fns
- .size __arm710_proc_info, . - __arm710_proc_info
+ PMD_SECT_AP_READ, \
+ __arm7_setup, arm7_processor_functions
crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm720_processor_functions, #object
-ENTRY(arm720_processor_functions)
- .word v4t_late_abort
- .word legacy_pabort
- .word cpu_arm720_proc_init
- .word cpu_arm720_proc_fin
- .word cpu_arm720_reset
- .word cpu_arm720_do_idle
- .word cpu_arm720_dcache_clean_area
- .word cpu_arm720_switch_mm
- .word cpu_arm720_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm720_processor_functions, . - arm720_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name: .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name: .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm710_name, #object
-cpu_arm710_name:
- .asciz "ARM710T"
- .size cpu_arm710_name, . - cpu_arm710_name
-
- .type cpu_arm720_name, #object
-cpu_arm720_name:
- .asciz "ARM720T"
- .size cpu_arm720_name, . - cpu_arm720_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm710_name, "ARM710T"
+ string cpu_arm720_name, "ARM720T"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __arm710_proc_info, #object
-__arm710_proc_info:
- .long 0x41807100 @ cpu_val
- .long 0xffffff00 @ cpu_mask
+.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __arm710_setup @ cpu_flush
+ b \cpu_flush @ cpu_flush
.long cpu_arch_name @ arch_name
.long cpu_elf_name @ elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
- .long cpu_arm710_name @ name
+ .long \cpu_name
.long arm720_processor_functions
.long v4_tlb_fns
.long v4wt_user_fns
.long v4_cache_fns
- .size __arm710_proc_info, . - __arm710_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
- .type __arm720_proc_info, #object
-__arm720_proc_info:
- .long 0x41807200 @ cpu_val
- .long 0xffffff00 @ cpu_mask
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm720_setup @ cpu_flush
- .long cpu_arch_name @ arch_name
- .long cpu_elf_name @ elf_name
- .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap
- .long cpu_arm720_name @ name
- .long arm720_processor_functions
- .long v4_tlb_fns
- .long v4wt_user_fns
- .long v4_cache_fns
- .size __arm720_proc_info, . - __arm720_proc_info
+ arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup
+ arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
+
.text
/*
* cpu_arm740_proc_init()
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm740_processor_functions, #object
-ENTRY(arm740_processor_functions)
- .word v4t_late_abort
- .word legacy_pabort
- .word cpu_arm740_proc_init
- .word cpu_arm740_proc_fin
- .word cpu_arm740_reset
- .word cpu_arm740_do_idle
- .word cpu_arm740_dcache_clean_area
- .word cpu_arm740_switch_mm
- .word 0 @ cpu_*_set_pte
- .word 0
- .word 0
- .word 0
- .size arm740_processor_functions, . - arm740_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm740, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm740_name, #object
-cpu_arm740_name:
- .ascii "ARM740T"
- .size cpu_arm740_name, . - cpu_arm740_name
+ string cpu_arch_name, "armv4"
+ string cpu_elf_name, "v4"
+ string cpu_arm740_name, "ARM740T"
.align
.long 0
.long v3_cache_fns @ cache model
.size __arm740_proc_info, . - __arm740_proc_info
-
-
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
+
.text
/*
* cpu_arm7tdmi_proc_init()
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm7tdmi_processor_functions, #object
-ENTRY(arm7tdmi_processor_functions)
- .word v4t_late_abort
- .word legacy_pabort
- .word cpu_arm7tdmi_proc_init
- .word cpu_arm7tdmi_proc_fin
- .word cpu_arm7tdmi_reset
- .word cpu_arm7tdmi_do_idle
- .word cpu_arm7tdmi_dcache_clean_area
- .word cpu_arm7tdmi_switch_mm
- .word 0 @ cpu_*_set_pte
- .word 0
- .word 0
- .word 0
- .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm7tdmi, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm7tdmi_name, #object
-cpu_arm7tdmi_name:
- .asciz "ARM7TDMI"
- .size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name
-
- .type cpu_triscenda7_name, #object
-cpu_triscenda7_name:
- .asciz "Triscend-A7x"
- .size cpu_triscenda7_name, . - cpu_triscenda7_name
-
- .type cpu_at91_name, #object
-cpu_at91_name:
- .asciz "Atmel-AT91M40xxx"
- .size cpu_at91_name, . - cpu_at91_name
-
- .type cpu_s3c3410_name, #object
-cpu_s3c3410_name:
- .asciz "Samsung-S3C3410"
- .size cpu_s3c3410_name, . - cpu_s3c3410_name
-
- .type cpu_s3c44b0x_name, #object
-cpu_s3c44b0x_name:
- .asciz "Samsung-S3C44B0x"
- .size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name
-
- .type cpu_s3c4510b, #object
-cpu_s3c4510b_name:
- .asciz "Samsung-S3C4510B"
- .size cpu_s3c4510b_name, . - cpu_s3c4510b_name
-
- .type cpu_s3c4530_name, #object
-cpu_s3c4530_name:
- .asciz "Samsung-S3C4530"
- .size cpu_s3c4530_name, . - cpu_s3c4530_name
-
- .type cpu_netarm_name, #object
-cpu_netarm_name:
- .asciz "NETARM"
- .size cpu_netarm_name, . - cpu_netarm_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm7tdmi_name, "ARM7TDMI"
+ string cpu_triscenda7_name, "Triscend-A7x"
+ string cpu_at91_name, "Atmel-AT91M40xxx"
+ string cpu_s3c3410_name, "Samsung-S3C3410"
+ string cpu_s3c44b0x_name, "Samsung-S3C44B0x"
+ string cpu_s3c4510b_name, "Samsung-S3C4510B"
+ string cpu_s3c4530_name, "Samsung-S3C4530"
+ string cpu_netarm_name, "NETARM"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __arm7tdmi_proc_info, #object
-__arm7tdmi_proc_info:
- .long 0x41007700
- .long 0xfff8ff00
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_26BIT
- .long cpu_arm7tdmi_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info
-
- .type __triscenda7_proc_info, #object
-__triscenda7_proc_info:
- .long 0x0001d2ff
- .long 0x0001ffff
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_triscenda7_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __triscenda7_proc_info, . - __triscenda7_proc_info
-
- .type __at91_proc_info, #object
-__at91_proc_info:
- .long 0x14000040
- .long 0xfff000e0
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_at91_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __at91_proc_info, . - __at91_proc_info
-
- .type __s3c4510b_proc_info, #object
-__s3c4510b_proc_info:
- .long 0x36365000
- .long 0xfffff000
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_s3c4510b_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __s3c4510b_proc_info, . - __s3c4510b_proc_info
-
- .type __s3c4530_proc_info, #object
-__s3c4530_proc_info:
- .long 0x4c000000
- .long 0xfff000e0
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_s3c4530_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __s3c4530_proc_info, . - __s3c4530_proc_info
-
- .type __s3c3410_proc_info, #object
-__s3c3410_proc_info:
- .long 0x34100000
- .long 0xffff0000
- .long 0
- .long 0
- b __arm7tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_s3c3410_name
- .long arm7tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __s3c3410_proc_info, . - __s3c3410_proc_info
-
- .type __s3c44b0x_proc_info, #object
-__s3c44b0x_proc_info:
- .long 0x44b00000
- .long 0xffff0000
+.macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \
+ extra_hwcaps=0
+ .type __\name\()_proc_info, #object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long 0
.long 0
b __arm7tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_s3c44b0x_name
+ .long HWCAP_SWP | HWCAP_26BIT | ( \extra_hwcaps )
+ .long \cpu_name
.long arm7tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
- .size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
+
+ arm7tdmi_proc_info arm7tdmi, 0x41007700, 0xfff8ff00, \
+ cpu_arm7tdmi_name
+ arm7tdmi_proc_info triscenda7, 0x0001d2ff, 0x0001ffff, \
+ cpu_triscenda7_name, extra_hwcaps=HWCAP_THUMB
+ arm7tdmi_proc_info at91, 0x14000040, 0xfff000e0, \
+ cpu_at91_name, extra_hwcaps=HWCAP_THUMB
+ arm7tdmi_proc_info s3c4510b, 0x36365000, 0xfffff000, \
+ cpu_s3c4510b_name, extra_hwcaps=HWCAP_THUMB
+ arm7tdmi_proc_info s3c4530, 0x4c000000, 0xfff000e0, \
+ cpu_s3c4530_name, extra_hwcaps=HWCAP_THUMB
+ arm7tdmi_proc_info s3c3410, 0x34100000, 0xffff0000, \
+ cpu_s3c3410_name, extra_hwcaps=HWCAP_THUMB
+ arm7tdmi_proc_info s3c44b0x, 0x44b00000, 0xffff0000, \
+ cpu_s3c44b0x_name, extra_hwcaps=HWCAP_THUMB
mov pc, lr
ENDPROC(arm920_dma_unmap_area)
-ENTRY(arm920_cache_fns)
- .long arm920_flush_icache_all
- .long arm920_flush_kern_cache_all
- .long arm920_flush_user_cache_all
- .long arm920_flush_user_cache_range
- .long arm920_coherent_kern_range
- .long arm920_coherent_user_range
- .long arm920_flush_kern_dcache_area
- .long arm920_dma_map_area
- .long arm920_dma_unmap_area
- .long arm920_dma_flush_range
-
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm920
#endif
PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
-#else
-#define cpu_arm920_do_suspend 0
-#define cpu_arm920_do_resume 0
#endif
__CPUINIT
crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm920_processor_functions, #object
-arm920_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm920_proc_init
- .word cpu_arm920_proc_fin
- .word cpu_arm920_reset
- .word cpu_arm920_do_idle
- .word cpu_arm920_dcache_clean_area
- .word cpu_arm920_switch_mm
- .word cpu_arm920_set_pte_ext
- .word cpu_arm920_suspend_size
- .word cpu_arm920_do_suspend
- .word cpu_arm920_do_resume
- .size arm920_processor_functions, . - arm920_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm920, dabort=v4t_early_abort, pabort=legacy_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm920_name, #object
-cpu_arm920_name:
- .asciz "ARM920T"
- .size cpu_arm920_name, . - cpu_arm920_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm920_name, "ARM920T"
.align
mov pc, lr
ENDPROC(arm922_dma_unmap_area)
-ENTRY(arm922_cache_fns)
- .long arm922_flush_icache_all
- .long arm922_flush_kern_cache_all
- .long arm922_flush_user_cache_all
- .long arm922_flush_user_cache_range
- .long arm922_coherent_kern_range
- .long arm922_coherent_user_range
- .long arm922_flush_kern_dcache_area
- .long arm922_dma_map_area
- .long arm922_dma_unmap_area
- .long arm922_dma_flush_range
-
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm922
#endif
crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm922_processor_functions, #object
-arm922_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm922_proc_init
- .word cpu_arm922_proc_fin
- .word cpu_arm922_reset
- .word cpu_arm922_do_idle
- .word cpu_arm922_dcache_clean_area
- .word cpu_arm922_switch_mm
- .word cpu_arm922_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm922_processor_functions, . - arm922_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm922, dabort=v4t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm922_name, #object
-cpu_arm922_name:
- .asciz "ARM922T"
- .size cpu_arm922_name, . - cpu_arm922_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm922_name, "ARM922T"
.align
mov pc, lr
ENDPROC(arm925_dma_unmap_area)
-ENTRY(arm925_cache_fns)
- .long arm925_flush_icache_all
- .long arm925_flush_kern_cache_all
- .long arm925_flush_user_cache_all
- .long arm925_flush_user_cache_range
- .long arm925_coherent_kern_range
- .long arm925_coherent_user_range
- .long arm925_flush_kern_dcache_area
- .long arm925_dma_map_area
- .long arm925_dma_unmap_area
- .long arm925_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm925
ENTRY(cpu_arm925_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130
__INITDATA
-
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm925_processor_functions, #object
-arm925_processor_functions:
- .word v4t_early_abort
- .word legacy_pabort
- .word cpu_arm925_proc_init
- .word cpu_arm925_proc_fin
- .word cpu_arm925_reset
- .word cpu_arm925_do_idle
- .word cpu_arm925_dcache_clean_area
- .word cpu_arm925_switch_mm
- .word cpu_arm925_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size arm925_processor_functions, . - arm925_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm925, dabort=v4t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm925_name, #object
-cpu_arm925_name:
- .asciz "ARM925T"
- .size cpu_arm925_name, . - cpu_arm925_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm925_name, "ARM925T"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __arm925_proc_info,#object
-__arm925_proc_info:
- .long 0x54029250
- .long 0xfffffff0
+.macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_BIT4 | \
PMD_SECT_AP_WRITE | \
.long v4wbi_tlb_fns
.long v4wb_user_fns
.long arm925_cache_fns
- .size __arm925_proc_info, . - __arm925_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
- .type __arm915_proc_info,#object
-__arm915_proc_info:
- .long 0x54029150
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm925_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB
- .long cpu_arm925_name
- .long arm925_processor_functions
- .long v4wbi_tlb_fns
- .long v4wb_user_fns
- .long arm925_cache_fns
- .size __arm925_proc_info, . - __arm925_proc_info
+ arm925_proc_info arm925, 0x54029250, 0xfffffff0, cpu_arm925_name
+ arm925_proc_info arm915, 0x54029150, 0xfffffff0, cpu_arm925_name
mov pc, lr
ENDPROC(arm926_dma_unmap_area)
-ENTRY(arm926_cache_fns)
- .long arm926_flush_icache_all
- .long arm926_flush_kern_cache_all
- .long arm926_flush_user_cache_all
- .long arm926_flush_user_cache_range
- .long arm926_coherent_kern_range
- .long arm926_coherent_user_range
- .long arm926_flush_kern_dcache_area
- .long arm926_dma_map_area
- .long arm926_dma_unmap_area
- .long arm926_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm926
ENTRY(cpu_arm926_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
-#else
-#define cpu_arm926_do_suspend 0
-#define cpu_arm926_do_resume 0
#endif
__CPUINIT
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm926_processor_functions, #object
-arm926_processor_functions:
- .word v5tj_early_abort
- .word legacy_pabort
- .word cpu_arm926_proc_init
- .word cpu_arm926_proc_fin
- .word cpu_arm926_reset
- .word cpu_arm926_do_idle
- .word cpu_arm926_dcache_clean_area
- .word cpu_arm926_switch_mm
- .word cpu_arm926_set_pte_ext
- .word cpu_arm926_suspend_size
- .word cpu_arm926_do_suspend
- .word cpu_arm926_do_resume
- .size arm926_processor_functions, . - arm926_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm926, dabort=v5tj_early_abort, pabort=legacy_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5tej"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm926_name, #object
-cpu_arm926_name:
- .asciz "ARM926EJ-S"
- .size cpu_arm926_name, . - cpu_arm926_name
+ string cpu_arch_name, "armv5tej"
+ string cpu_elf_name, "v5"
+ string cpu_arm926_name, "ARM926EJ-S"
.align
mov pc, lr
ENDPROC(arm940_dma_unmap_area)
-ENTRY(arm940_cache_fns)
- .long arm940_flush_icache_all
- .long arm940_flush_kern_cache_all
- .long arm940_flush_user_cache_all
- .long arm940_flush_user_cache_range
- .long arm940_coherent_kern_range
- .long arm940_coherent_user_range
- .long arm940_flush_kern_dcache_area
- .long arm940_dma_map_area
- .long arm940_dma_unmap_area
- .long arm940_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm940
__CPUINIT
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm940_processor_functions, #object
-ENTRY(arm940_processor_functions)
- .word nommu_early_abort
- .word legacy_pabort
- .word cpu_arm940_proc_init
- .word cpu_arm940_proc_fin
- .word cpu_arm940_reset
- .word cpu_arm940_do_idle
- .word cpu_arm940_dcache_clean_area
- .word cpu_arm940_switch_mm
- .word 0 @ cpu_*_set_pte
- .word 0
- .word 0
- .word 0
- .size arm940_processor_functions, . - arm940_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm940, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
-.type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm940_name, #object
-cpu_arm940_name:
- .ascii "ARM940T"
- .size cpu_arm940_name, . - cpu_arm940_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm940_name, "ARM940T"
.align
mov pc, lr
ENDPROC(arm946_dma_unmap_area)
-ENTRY(arm946_cache_fns)
- .long arm946_flush_icache_all
- .long arm946_flush_kern_cache_all
- .long arm946_flush_user_cache_all
- .long arm946_flush_user_cache_range
- .long arm946_coherent_kern_range
- .long arm946_coherent_user_range
- .long arm946_flush_kern_dcache_area
- .long arm946_dma_map_area
- .long arm946_dma_unmap_area
- .long arm946_dma_flush_range
-
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions arm946
ENTRY(cpu_arm946_dcache_clean_area)
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm946_processor_functions, #object
-ENTRY(arm946_processor_functions)
- .word nommu_early_abort
- .word legacy_pabort
- .word cpu_arm946_proc_init
- .word cpu_arm946_proc_fin
- .word cpu_arm946_reset
- .word cpu_arm946_do_idle
-
- .word cpu_arm946_dcache_clean_area
- .word cpu_arm946_switch_mm
- .word 0 @ cpu_*_set_pte
- .word 0
- .word 0
- .word 0
- .size arm946_processor_functions, . - arm946_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm946, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5t"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm946_name, #object
-cpu_arm946_name:
- .ascii "ARM946E-S"
- .size cpu_arm946_name, . - cpu_arm946_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5t"
+ string cpu_arm946_name, "ARM946E-S"
.align
#include <asm/pgtable.h>
#include <asm/ptrace.h>
+#include "proc-macros.S"
+
.text
/*
* cpu_arm9tdmi_proc_init()
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type arm9tdmi_processor_functions, #object
-ENTRY(arm9tdmi_processor_functions)
- .word nommu_early_abort
- .word legacy_pabort
- .word cpu_arm9tdmi_proc_init
- .word cpu_arm9tdmi_proc_fin
- .word cpu_arm9tdmi_reset
- .word cpu_arm9tdmi_do_idle
- .word cpu_arm9tdmi_dcache_clean_area
- .word cpu_arm9tdmi_switch_mm
- .word 0 @ cpu_*_set_pte
- .word 0
- .word 0
- .word 0
- .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions arm9tdmi, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4t"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_arm9tdmi_name, #object
-cpu_arm9tdmi_name:
- .asciz "ARM9TDMI"
- .size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name
-
- .type cpu_p2001_name, #object
-cpu_p2001_name:
- .asciz "P2001"
- .size cpu_p2001_name, . - cpu_p2001_name
+ string cpu_arch_name, "armv4t"
+ string cpu_elf_name, "v4"
+ string cpu_arm9tdmi_name, "ARM9TDMI"
+ string cpu_p2001_name, "P2001"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __arm9tdmi_proc_info, #object
-__arm9tdmi_proc_info:
- .long 0x41009900
- .long 0xfff8ff00
+.macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
+ .type __\name\()_proc_info, #object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long 0
.long 0
b __arm9tdmi_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_arm9tdmi_name
+ .long \cpu_name
.long arm9tdmi_processor_functions
.long 0
.long 0
.long v4_cache_fns
- .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
- .type __p2001_proc_info, #object
-__p2001_proc_info:
- .long 0x41029000
- .long 0xffffffff
- .long 0
- .long 0
- b __arm9tdmi_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT
- .long cpu_p2001_name
- .long arm9tdmi_processor_functions
- .long 0
- .long 0
- .long v4_cache_fns
- .size __p2001_proc_info, . - __p2001_proc_info
+ arm9tdmi_proc_info arm9tdmi, 0x41009900, 0xfff8ff00, cpu_arm9tdmi_name
+ arm9tdmi_proc_info p2001, 0x41029000, 0xffffffff, cpu_p2001_name
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type fa526_processor_functions, #object
-fa526_processor_functions:
- .word v4_early_abort
- .word legacy_pabort
- .word cpu_fa526_proc_init
- .word cpu_fa526_proc_fin
- .word cpu_fa526_reset
- .word cpu_fa526_do_idle
- .word cpu_fa526_dcache_clean_area
- .word cpu_fa526_switch_mm
- .word cpu_fa526_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size fa526_processor_functions, . - fa526_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_fa526_name, #object
-cpu_fa526_name:
- .asciz "FA526"
- .size cpu_fa526_name, . - cpu_fa526_name
+ string cpu_arch_name, "armv4"
+ string cpu_elf_name, "v4"
+ string cpu_fa526_name, "FA526"
.align
mov pc, lr
ENDPROC(feroceon_dma_unmap_area)
-ENTRY(feroceon_cache_fns)
- .long feroceon_flush_icache_all
- .long feroceon_flush_kern_cache_all
- .long feroceon_flush_user_cache_all
- .long feroceon_flush_user_cache_range
- .long feroceon_coherent_kern_range
- .long feroceon_coherent_user_range
- .long feroceon_flush_kern_dcache_area
- .long feroceon_dma_map_area
- .long feroceon_dma_unmap_area
- .long feroceon_dma_flush_range
-
-ENTRY(feroceon_range_cache_fns)
- .long feroceon_flush_icache_all
- .long feroceon_flush_kern_cache_all
- .long feroceon_flush_user_cache_all
- .long feroceon_flush_user_cache_range
- .long feroceon_coherent_kern_range
- .long feroceon_coherent_user_range
- .long feroceon_range_flush_kern_dcache_area
- .long feroceon_range_dma_map_area
- .long feroceon_dma_unmap_area
- .long feroceon_range_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions feroceon
+
+.macro range_alias basename
+ .globl feroceon_range_\basename
+ .type feroceon_range_\basename , %function
+ .equ feroceon_range_\basename , feroceon_\basename
+.endm
+
+/*
+ * Most of the cache functions are unchanged for this case.
+ * Export suitable alias symbols for the unchanged functions:
+ */
+ range_alias flush_icache_all
+ range_alias flush_user_cache_all
+ range_alias flush_kern_cache_all
+ range_alias flush_user_cache_range
+ range_alias coherent_kern_range
+ range_alias coherent_user_range
+ range_alias dma_unmap_area
+
+ define_cache_functions feroceon_range
.align 5
ENTRY(cpu_feroceon_dcache_clean_area)
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type feroceon_processor_functions, #object
-feroceon_processor_functions:
- .word v5t_early_abort
- .word legacy_pabort
- .word cpu_feroceon_proc_init
- .word cpu_feroceon_proc_fin
- .word cpu_feroceon_reset
- .word cpu_feroceon_do_idle
- .word cpu_feroceon_dcache_clean_area
- .word cpu_feroceon_switch_mm
- .word cpu_feroceon_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size feroceon_processor_functions, . - feroceon_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions feroceon, dabort=v5t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_feroceon_name, #object
-cpu_feroceon_name:
- .asciz "Feroceon"
- .size cpu_feroceon_name, . - cpu_feroceon_name
-
- .type cpu_88fr531_name, #object
-cpu_88fr531_name:
- .asciz "Feroceon 88FR531-vd"
- .size cpu_88fr531_name, . - cpu_88fr531_name
-
- .type cpu_88fr571_name, #object
-cpu_88fr571_name:
- .asciz "Feroceon 88FR571-vd"
- .size cpu_88fr571_name, . - cpu_88fr571_name
-
- .type cpu_88fr131_name, #object
-cpu_88fr131_name:
- .asciz "Feroceon 88FR131"
- .size cpu_88fr131_name, . - cpu_88fr131_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_feroceon_name, "Feroceon"
+ string cpu_88fr531_name, "Feroceon 88FR531-vd"
+ string cpu_88fr571_name, "Feroceon 88FR571-vd"
+ string cpu_88fr131_name, "Feroceon 88FR131"
.align
.section ".proc.info.init", #alloc, #execinstr
-#ifdef CONFIG_CPU_FEROCEON_OLD_ID
- .type __feroceon_old_id_proc_info,#object
-__feroceon_old_id_proc_info:
- .long 0x41009260
- .long 0xff00fff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __feroceon_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_feroceon_name
- .long feroceon_processor_functions
- .long v4wbi_tlb_fns
- .long feroceon_user_fns
- .long feroceon_cache_fns
- .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info
-#endif
-
- .type __88fr531_proc_info,#object
-__88fr531_proc_info:
- .long 0x56055310
- .long 0xfffffff0
+.macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_88fr531_name
+ .long \cpu_name
.long feroceon_processor_functions
.long v4wbi_tlb_fns
.long feroceon_user_fns
- .long feroceon_cache_fns
- .size __88fr531_proc_info, . - __88fr531_proc_info
+ .long \cache
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
- .type __88fr571_proc_info,#object
-__88fr571_proc_info:
- .long 0x56155710
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __feroceon_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_88fr571_name
- .long feroceon_processor_functions
- .long v4wbi_tlb_fns
- .long feroceon_user_fns
- .long feroceon_range_cache_fns
- .size __88fr571_proc_info, . - __88fr571_proc_info
+#ifdef CONFIG_CPU_FEROCEON_OLD_ID
+ feroceon_proc_info feroceon_old_id, 0x41009260, 0xff00fff0, \
+ cpu_name=cpu_feroceon_name, cache=feroceon_cache_fns
+#endif
- .type __88fr131_proc_info,#object
-__88fr131_proc_info:
- .long 0x56251310
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __feroceon_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_88fr131_name
- .long feroceon_processor_functions
- .long v4wbi_tlb_fns
- .long feroceon_user_fns
- .long feroceon_range_cache_fns
- .size __88fr131_proc_info, . - __88fr131_proc_info
+ feroceon_proc_info 88fr531, 0x56055310, 0xfffffff0, cpu_88fr531_name, \
+ cache=feroceon_cache_fns
+ feroceon_proc_info 88fr571, 0x56155710, 0xfffffff0, cpu_88fr571_name, \
+ cache=feroceon_range_cache_fns
+ feroceon_proc_info 88fr131, 0x56251310, 0xfffffff0, cpu_88fr131_name, \
+ cache=feroceon_range_cache_fns
mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
mcr p15, 0, ip, c7, c10, 4 @ data write barrier
.endm
+
+.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0
+ .type \name\()_processor_functions, #object
+ .align 2
+ENTRY(\name\()_processor_functions)
+ .word \dabort
+ .word \pabort
+ .word cpu_\name\()_proc_init
+ .word cpu_\name\()_proc_fin
+ .word cpu_\name\()_reset
+ .word cpu_\name\()_do_idle
+ .word cpu_\name\()_dcache_clean_area
+ .word cpu_\name\()_switch_mm
+
+ .if \nommu
+ .word 0
+ .else
+ .word cpu_\name\()_set_pte_ext
+ .endif
+
+ .if \suspend
+ .word cpu_\name\()_suspend_size
+#ifdef CONFIG_PM_SLEEP
+ .word cpu_\name\()_do_suspend
+ .word cpu_\name\()_do_resume
+#else
+ .word 0
+ .word 0
+#endif
+ .else
+ .word 0
+ .word 0
+ .word 0
+ .endif
+
+ .size \name\()_processor_functions, . - \name\()_processor_functions
+.endm
+
+.macro define_cache_functions name:req
+ .align 2
+ .type \name\()_cache_fns, #object
+ENTRY(\name\()_cache_fns)
+ .long \name\()_flush_icache_all
+ .long \name\()_flush_kern_cache_all
+ .long \name\()_flush_user_cache_all
+ .long \name\()_flush_user_cache_range
+ .long \name\()_coherent_kern_range
+ .long \name\()_coherent_user_range
+ .long \name\()_flush_kern_dcache_area
+ .long \name\()_dma_map_area
+ .long \name\()_dma_unmap_area
+ .long \name\()_dma_flush_range
+ .size \name\()_cache_fns, . - \name\()_cache_fns
+.endm
+
+.macro define_tlb_functions name:req, flags_up:req, flags_smp
+ .type \name\()_tlb_fns, #object
+ENTRY(\name\()_tlb_fns)
+ .long \name\()_flush_user_tlb_range
+ .long \name\()_flush_kern_tlb_range
+ .ifnb \flags_smp
+ ALT_SMP(.long \flags_smp )
+ ALT_UP(.long \flags_up )
+ .else
+ .long \flags_up
+ .endif
+ .size \name\()_tlb_fns, . - \name\()_tlb_fns
+.endm
mcr p15, 0, r0, c7, c0, 4 @ wait for interrupt
mov pc, lr
+/*
+ * flush_icache_all()
+ *
+ * Unconditionally clean and invalidate the entire icache.
+ */
+ENTRY(mohawk_flush_icache_all)
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mov pc, lr
+ENDPROC(mohawk_flush_icache_all)
+
/*
* flush_user_cache_all()
*
mov pc, lr
ENDPROC(mohawk_dma_unmap_area)
-ENTRY(mohawk_cache_fns)
- .long mohawk_flush_kern_cache_all
- .long mohawk_flush_user_cache_all
- .long mohawk_flush_user_cache_range
- .long mohawk_coherent_kern_range
- .long mohawk_coherent_user_range
- .long mohawk_flush_kern_dcache_area
- .long mohawk_dma_map_area
- .long mohawk_dma_unmap_area
- .long mohawk_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions mohawk
ENTRY(cpu_mohawk_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
- .type mohawk_processor_functions, #object
-mohawk_processor_functions:
- .word v5t_early_abort
- .word legacy_pabort
- .word cpu_mohawk_proc_init
- .word cpu_mohawk_proc_fin
- .word cpu_mohawk_reset
- .word cpu_mohawk_do_idle
- .word cpu_mohawk_dcache_clean_area
- .word cpu_mohawk_switch_mm
- .word cpu_mohawk_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size mohawk_processor_functions, . - mohawk_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_mohawk_name, #object
-cpu_mohawk_name:
- .asciz "Marvell 88SV331x"
- .size cpu_mohawk_name, . - cpu_mohawk_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_mohawk_name, "Marvell 88SV331x"
.align
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
-
- .type sa110_processor_functions, #object
-ENTRY(sa110_processor_functions)
- .word v4_early_abort
- .word legacy_pabort
- .word cpu_sa110_proc_init
- .word cpu_sa110_proc_fin
- .word cpu_sa110_reset
- .word cpu_sa110_do_idle
- .word cpu_sa110_dcache_clean_area
- .word cpu_sa110_switch_mm
- .word cpu_sa110_set_pte_ext
- .word 0
- .word 0
- .word 0
- .size sa110_processor_functions, . - sa110_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_sa110_name, #object
-cpu_sa110_name:
- .asciz "StrongARM-110"
- .size cpu_sa110_name, . - cpu_sa110_name
+ string cpu_arch_name, "armv4"
+ string cpu_elf_name, "v4"
+ string cpu_sa110_name, "StrongARM-110"
.align
*/
#define DCACHELINESIZE 32
- __INIT
+ .section .text
/*
* cpu_sa1100_proc_init()
mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland
mov pc, lr
- .section .text
-
/*
* cpu_sa1100_proc_fin()
*
PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
-#else
-#define cpu_sa1100_do_suspend 0
-#define cpu_sa1100_do_resume 0
#endif
__CPUINIT
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
-
/*
* SA1100 and SA1110 share the same function calls
*/
- .type sa1100_processor_functions, #object
-ENTRY(sa1100_processor_functions)
- .word v4_early_abort
- .word legacy_pabort
- .word cpu_sa1100_proc_init
- .word cpu_sa1100_proc_fin
- .word cpu_sa1100_reset
- .word cpu_sa1100_do_idle
- .word cpu_sa1100_dcache_clean_area
- .word cpu_sa1100_switch_mm
- .word cpu_sa1100_set_pte_ext
- .word cpu_sa1100_suspend_size
- .word cpu_sa1100_do_suspend
- .word cpu_sa1100_do_resume
- .size sa1100_processor_functions, . - sa1100_processor_functions
- .section ".rodata"
-
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv4"
- .size cpu_arch_name, . - cpu_arch_name
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v4"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_sa1100_name, #object
-cpu_sa1100_name:
- .asciz "StrongARM-1100"
- .size cpu_sa1100_name, . - cpu_sa1100_name
+ .section ".rodata"
- .type cpu_sa1110_name, #object
-cpu_sa1110_name:
- .asciz "StrongARM-1110"
- .size cpu_sa1110_name, . - cpu_sa1110_name
+ string cpu_arch_name, "armv4"
+ string cpu_elf_name, "v4"
+ string cpu_sa1100_name, "StrongARM-1100"
+ string cpu_sa1110_name, "StrongARM-1110"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __sa1100_proc_info,#object
-__sa1100_proc_info:
- .long 0x4401a110
- .long 0xfffffff0
+.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
- .long cpu_sa1100_name
+ .long \cpu_name
.long sa1100_processor_functions
.long v4wb_tlb_fns
.long v4_mc_user_fns
.long v4wb_cache_fns
- .size __sa1100_proc_info, . - __sa1100_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
- .type __sa1110_proc_info,#object
-__sa1110_proc_info:
- .long 0x6901b110
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __sa1100_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT
- .long cpu_sa1110_name
- .long sa1100_processor_functions
- .long v4wb_tlb_fns
- .long v4_mc_user_fns
- .long v4wb_cache_fns
- .size __sa1110_proc_info, . - __sa1110_proc_info
+ sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name
+ sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name
*/
.align 5
ENTRY(cpu_v6_reset)
+ mrc p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x1 @ ...............m
+ mcr p15, 0, r1, c1, c0, 0 @ disable MMU
+ mov r1, #0
+ mcr p15, 0, r1, c7, c5, 4 @ ISB
mov pc, r0
/*
cpu_resume_l1_flags:
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
-#else
-#define cpu_v6_do_suspend 0
-#define cpu_v6_do_resume 0
#endif
-
- .type cpu_v6_name, #object
-cpu_v6_name:
- .asciz "ARMv6-compatible processor"
- .size cpu_v6_name, . - cpu_v6_name
+ string cpu_v6_name, "ARMv6-compatible processor"
.align
__INITDATA
- .type v6_processor_functions, #object
-ENTRY(v6_processor_functions)
- .word v6_early_abort
- .word v6_pabort
- .word cpu_v6_proc_init
- .word cpu_v6_proc_fin
- .word cpu_v6_reset
- .word cpu_v6_do_idle
- .word cpu_v6_dcache_clean_area
- .word cpu_v6_switch_mm
- .word cpu_v6_set_pte_ext
- .word cpu_v6_suspend_size
- .word cpu_v6_do_suspend
- .word cpu_v6_do_resume
- .size v6_processor_functions, . - v6_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv6"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v6"
- .size cpu_elf_name, . - cpu_elf_name
+ string cpu_arch_name, "armv6"
+ string cpu_elf_name, "v6"
.align
.section ".proc.info.init", #alloc, #execinstr
* to what would be the reset vector.
*
* - loc - location to jump to for soft reset
+ *
+ * This code must be executed using a flat identity mapping with
+ * caches disabled.
*/
.align 5
ENTRY(cpu_v7_reset)
+ mrc p15, 0, r1, c1, c0, 0 @ ctrl register
+ bic r1, r1, #0x1 @ ...............m
+ mcr p15, 0, r1, c1, c0, 0 @ disable MMU
+ isb
mov pc, r0
ENDPROC(cpu_v7_reset)
mov pc, lr
ENDPROC(cpu_v7_set_pte_ext)
-cpu_v7_name:
- .ascii "ARMv7 Processor"
+ string cpu_v7_name, "ARMv7 Processor"
.align
/*
cpu_resume_l1_flags:
ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
-#else
-#define cpu_v7_do_suspend 0
-#define cpu_v7_do_resume 0
#endif
__CPUINIT
* It is assumed that:
* - cache type register is implemented
*/
+__v7_ca5mp_setup:
__v7_ca9mp_setup:
+ mov r10, #(1 << 0) @ TLB ops broadcasting
+ b 1f
+__v7_ca15mp_setup:
+ mov r10, #0
+1:
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, r0, c1, c0, 1)
ALT_UP(mov r0, #(1 << 6)) @ fake it for UP
tst r0, #(1 << 6) @ SMP/nAMP mode enabled?
- orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and
- mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting
+ orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode
+ orreq r0, r0, r10 @ Enable CPU-specific SMP bits
+ mcreq p15, 0, r0, c1, c0, 1
#endif
__v7_setup:
adr r12, __v7_setup_stack @ the local stack
__INITDATA
- .type v7_processor_functions, #object
-ENTRY(v7_processor_functions)
- .word v7_early_abort
- .word v7_pabort
- .word cpu_v7_proc_init
- .word cpu_v7_proc_fin
- .word cpu_v7_reset
- .word cpu_v7_do_idle
- .word cpu_v7_dcache_clean_area
- .word cpu_v7_switch_mm
- .word cpu_v7_set_pte_ext
- .word cpu_v7_suspend_size
- .word cpu_v7_do_suspend
- .word cpu_v7_do_resume
- .size v7_processor_functions, . - v7_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv7"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v7"
- .size cpu_elf_name, . - cpu_elf_name
+ string cpu_arch_name, "armv7"
+ string cpu_elf_name, "v7"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __v7_ca9mp_proc_info, #object
-__v7_ca9mp_proc_info:
- .long 0x410fc090 @ Required ID value
- .long 0xff0ffff0 @ Mask for ID
- ALT_SMP(.long \
- PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \
- PMD_FLAGS_SMP)
- ALT_UP(.long \
- PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \
- PMD_FLAGS_UP)
- .long PMD_TYPE_SECT | \
- PMD_SECT_XN | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- W(b) __v7_ca9mp_setup
+ /*
+ * Standard v7 proc info content
+ */
+.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0
+ ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
+ PMD_FLAGS_SMP | \mm_mmuflags)
+ ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \
+ PMD_FLAGS_UP | \mm_mmuflags)
+ .long PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ | \io_mmuflags
+ W(b) \initfunc
.long cpu_arch_name
.long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
+ .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \
+ HWCAP_EDSP | HWCAP_TLS | \hwcaps
.long cpu_v7_name
.long v7_processor_functions
.long v7wbi_tlb_fns
.long v6_user_fns
.long v7_cache_fns
+.endm
+
+ /*
+ * ARM Ltd. Cortex A5 processor.
+ */
+ .type __v7_ca5mp_proc_info, #object
+__v7_ca5mp_proc_info:
+ .long 0x410fc050
+ .long 0xff0ffff0
+ __v7_proc __v7_ca5mp_setup
+ .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info
+
+ /*
+ * ARM Ltd. Cortex A9 processor.
+ */
+ .type __v7_ca9mp_proc_info, #object
+__v7_ca9mp_proc_info:
+ .long 0x410fc090
+ .long 0xff0ffff0
+ __v7_proc __v7_ca9mp_setup
.size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info
+ /*
+ * ARM Ltd. Cortex A15 processor.
+ */
+ .type __v7_ca15mp_proc_info, #object
+__v7_ca15mp_proc_info:
+ .long 0x410fc0f0
+ .long 0xff0ffff0
+ __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV
+ .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info
+
/*
* Match any ARMv7 processor core.
*/
__v7_proc_info:
.long 0x000f0000 @ Required ID value
.long 0x000f0000 @ Mask for ID
- ALT_SMP(.long \
- PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \
- PMD_FLAGS_SMP)
- ALT_UP(.long \
- PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ | \
- PMD_FLAGS_UP)
- .long PMD_TYPE_SECT | \
- PMD_SECT_XN | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- W(b) __v7_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
- .long cpu_v7_name
- .long v7_processor_functions
- .long v7wbi_tlb_fns
- .long v6_user_fns
- .long v7_cache_fns
+ __v7_proc __v7_setup
.size __v7_proc_info, . - __v7_proc_info
mov pc, lr
ENDPROC(xsc3_dma_unmap_area)
-ENTRY(xsc3_cache_fns)
- .long xsc3_flush_icache_all
- .long xsc3_flush_kern_cache_all
- .long xsc3_flush_user_cache_all
- .long xsc3_flush_user_cache_range
- .long xsc3_coherent_kern_range
- .long xsc3_coherent_user_range
- .long xsc3_flush_kern_dcache_area
- .long xsc3_dma_map_area
- .long xsc3_dma_unmap_area
- .long xsc3_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions xsc3
ENTRY(cpu_xsc3_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line
ldr r3, =0x542e @ section flags
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
-#else
-#define cpu_xsc3_do_suspend 0
-#define cpu_xsc3_do_resume 0
#endif
__CPUINIT
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
-
- .type xsc3_processor_functions, #object
-ENTRY(xsc3_processor_functions)
- .word v5t_early_abort
- .word legacy_pabort
- .word cpu_xsc3_proc_init
- .word cpu_xsc3_proc_fin
- .word cpu_xsc3_reset
- .word cpu_xsc3_do_idle
- .word cpu_xsc3_dcache_clean_area
- .word cpu_xsc3_switch_mm
- .word cpu_xsc3_set_pte_ext
- .word cpu_xsc3_suspend_size
- .word cpu_xsc3_do_suspend
- .word cpu_xsc3_do_resume
- .size xsc3_processor_functions, . - xsc3_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions xsc3, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_xsc3_name, #object
-cpu_xsc3_name:
- .asciz "XScale-V3 based processor"
- .size cpu_xsc3_name, . - cpu_xsc3_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+ string cpu_xsc3_name, "XScale-V3 based processor"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __xsc3_proc_info,#object
-__xsc3_proc_info:
- .long 0x69056000
- .long 0xffffe000
+.macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
.long v4wbi_tlb_fns
.long xsc3_mc_user_fns
.long xsc3_cache_fns
- .size __xsc3_proc_info, . - __xsc3_proc_info
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
-/* Note: PXA935 changed its implementor ID from Intel to Marvell */
+ xsc3_proc_info xsc3, 0x69056000, 0xffffe000
- .type __xsc3_pxa935_proc_info,#object
-__xsc3_pxa935_proc_info:
- .long 0x56056000
- .long 0xffffe000
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xsc3_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_xsc3_name
- .long xsc3_processor_functions
- .long v4wbi_tlb_fns
- .long xsc3_mc_user_fns
- .long xsc3_cache_fns
- .size __xsc3_pxa935_proc_info, . - __xsc3_pxa935_proc_info
+/* Note: PXA935 changed its implementor ID from Intel to Marvell */
+ xsc3_proc_info xsc3_pxa935, 0x56056000, 0xffffe000
* - size - size of region
* - dir - DMA direction
*/
-ENTRY(xscale_dma_a0_map_area)
+ENTRY(xscale_80200_A0_A1_dma_map_area)
add r1, r1, r0
teq r2, #DMA_TO_DEVICE
beq xscale_dma_clean_range
b xscale_dma_flush_range
-ENDPROC(xscale_dma_a0_map_area)
+ENDPROC(xscale_80200_A0_A1_dma_map_area)
/*
* dma_unmap_area(start, size, dir)
mov pc, lr
ENDPROC(xscale_dma_unmap_area)
-ENTRY(xscale_cache_fns)
- .long xscale_flush_icache_all
- .long xscale_flush_kern_cache_all
- .long xscale_flush_user_cache_all
- .long xscale_flush_user_cache_range
- .long xscale_coherent_kern_range
- .long xscale_coherent_user_range
- .long xscale_flush_kern_dcache_area
- .long xscale_dma_map_area
- .long xscale_dma_unmap_area
- .long xscale_dma_flush_range
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions xscale
/*
* On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
* revision January 22, 2003, available at:
* http://www.intel.com/design/iio/specupdt/273415.htm
*/
-ENTRY(xscale_80200_A0_A1_cache_fns)
- .long xscale_flush_kern_cache_all
- .long xscale_flush_user_cache_all
- .long xscale_flush_user_cache_range
- .long xscale_coherent_kern_range
- .long xscale_coherent_user_range
- .long xscale_flush_kern_dcache_area
- .long xscale_dma_a0_map_area
- .long xscale_dma_unmap_area
- .long xscale_dma_flush_range
+.macro a0_alias basename
+ .globl xscale_80200_A0_A1_\basename
+ .type xscale_80200_A0_A1_\basename , %function
+ .equ xscale_80200_A0_A1_\basename , xscale_\basename
+.endm
+
+/*
+ * Most of the cache functions are unchanged for these processor revisions.
+ * Export suitable alias symbols for the unchanged functions:
+ */
+ a0_alias flush_icache_all
+ a0_alias flush_user_cache_all
+ a0_alias flush_kern_cache_all
+ a0_alias flush_user_cache_range
+ a0_alias coherent_kern_range
+ a0_alias coherent_user_range
+ a0_alias flush_kern_dcache_area
+ a0_alias dma_flush_range
+ a0_alias dma_unmap_area
+
+ @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
+ define_cache_functions xscale_80200_A0_A1
ENTRY(cpu_xscale_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
-#else
-#define cpu_xscale_do_suspend 0
-#define cpu_xscale_do_resume 0
#endif
__CPUINIT
__INITDATA
-/*
- * Purpose : Function pointers used to access above functions - all calls
- * come through these
- */
-
- .type xscale_processor_functions, #object
-ENTRY(xscale_processor_functions)
- .word v5t_early_abort
- .word legacy_pabort
- .word cpu_xscale_proc_init
- .word cpu_xscale_proc_fin
- .word cpu_xscale_reset
- .word cpu_xscale_do_idle
- .word cpu_xscale_dcache_clean_area
- .word cpu_xscale_switch_mm
- .word cpu_xscale_set_pte_ext
- .word cpu_xscale_suspend_size
- .word cpu_xscale_do_suspend
- .word cpu_xscale_do_resume
- .size xscale_processor_functions, . - xscale_processor_functions
+ @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
+ define_processor_functions xscale, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1
.section ".rodata"
- .type cpu_arch_name, #object
-cpu_arch_name:
- .asciz "armv5te"
- .size cpu_arch_name, . - cpu_arch_name
-
- .type cpu_elf_name, #object
-cpu_elf_name:
- .asciz "v5"
- .size cpu_elf_name, . - cpu_elf_name
-
- .type cpu_80200_A0_A1_name, #object
-cpu_80200_A0_A1_name:
- .asciz "XScale-80200 A0/A1"
- .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name
-
- .type cpu_80200_name, #object
-cpu_80200_name:
- .asciz "XScale-80200"
- .size cpu_80200_name, . - cpu_80200_name
-
- .type cpu_80219_name, #object
-cpu_80219_name:
- .asciz "XScale-80219"
- .size cpu_80219_name, . - cpu_80219_name
-
- .type cpu_8032x_name, #object
-cpu_8032x_name:
- .asciz "XScale-IOP8032x Family"
- .size cpu_8032x_name, . - cpu_8032x_name
-
- .type cpu_8033x_name, #object
-cpu_8033x_name:
- .asciz "XScale-IOP8033x Family"
- .size cpu_8033x_name, . - cpu_8033x_name
-
- .type cpu_pxa250_name, #object
-cpu_pxa250_name:
- .asciz "XScale-PXA250"
- .size cpu_pxa250_name, . - cpu_pxa250_name
-
- .type cpu_pxa210_name, #object
-cpu_pxa210_name:
- .asciz "XScale-PXA210"
- .size cpu_pxa210_name, . - cpu_pxa210_name
-
- .type cpu_ixp42x_name, #object
-cpu_ixp42x_name:
- .asciz "XScale-IXP42x Family"
- .size cpu_ixp42x_name, . - cpu_ixp42x_name
-
- .type cpu_ixp43x_name, #object
-cpu_ixp43x_name:
- .asciz "XScale-IXP43x Family"
- .size cpu_ixp43x_name, . - cpu_ixp43x_name
-
- .type cpu_ixp46x_name, #object
-cpu_ixp46x_name:
- .asciz "XScale-IXP46x Family"
- .size cpu_ixp46x_name, . - cpu_ixp46x_name
-
- .type cpu_ixp2400_name, #object
-cpu_ixp2400_name:
- .asciz "XScale-IXP2400"
- .size cpu_ixp2400_name, . - cpu_ixp2400_name
-
- .type cpu_ixp2800_name, #object
-cpu_ixp2800_name:
- .asciz "XScale-IXP2800"
- .size cpu_ixp2800_name, . - cpu_ixp2800_name
-
- .type cpu_pxa255_name, #object
-cpu_pxa255_name:
- .asciz "XScale-PXA255"
- .size cpu_pxa255_name, . - cpu_pxa255_name
-
- .type cpu_pxa270_name, #object
-cpu_pxa270_name:
- .asciz "XScale-PXA270"
- .size cpu_pxa270_name, . - cpu_pxa270_name
+ string cpu_arch_name, "armv5te"
+ string cpu_elf_name, "v5"
+
+ string cpu_80200_A0_A1_name, "XScale-80200 A0/A1"
+ string cpu_80200_name, "XScale-80200"
+ string cpu_80219_name, "XScale-80219"
+ string cpu_8032x_name, "XScale-IOP8032x Family"
+ string cpu_8033x_name, "XScale-IOP8033x Family"
+ string cpu_pxa250_name, "XScale-PXA250"
+ string cpu_pxa210_name, "XScale-PXA210"
+ string cpu_ixp42x_name, "XScale-IXP42x Family"
+ string cpu_ixp43x_name, "XScale-IXP43x Family"
+ string cpu_ixp46x_name, "XScale-IXP46x Family"
+ string cpu_ixp2400_name, "XScale-IXP2400"
+ string cpu_ixp2800_name, "XScale-IXP2800"
+ string cpu_pxa255_name, "XScale-PXA255"
+ string cpu_pxa270_name, "XScale-PXA270"
.align
.section ".proc.info.init", #alloc, #execinstr
- .type __80200_A0_A1_proc_info,#object
-__80200_A0_A1_proc_info:
- .long 0x69052000
- .long 0xfffffffe
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_80200_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_80200_A0_A1_cache_fns
- .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info
-
- .type __80200_proc_info,#object
-__80200_proc_info:
- .long 0x69052000
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
+.macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache
+ .type __\name\()_proc_info,#object
+__\name\()_proc_info:
+ .long \cpu_val
+ .long \cpu_mask
+ .long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
+ .long PMD_TYPE_SECT | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
b __xscale_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_80200_name
+ .long \cpu_name
.long xscale_processor_functions
.long v4wbi_tlb_fns
.long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __80200_proc_info, . - __80200_proc_info
-
- .type __80219_proc_info,#object
-__80219_proc_info:
- .long 0x69052e20
- .long 0xffffffe0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_80219_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __80219_proc_info, . - __80219_proc_info
-
- .type __8032x_proc_info,#object
-__8032x_proc_info:
- .long 0x69052420
- .long 0xfffff7e0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_8032x_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __8032x_proc_info, . - __8032x_proc_info
-
- .type __8033x_proc_info,#object
-__8033x_proc_info:
- .long 0x69054010
- .long 0xfffffd30
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_8033x_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __8033x_proc_info, . - __8033x_proc_info
-
- .type __pxa250_proc_info,#object
-__pxa250_proc_info:
- .long 0x69052100
- .long 0xfffff7f0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_pxa250_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __pxa250_proc_info, . - __pxa250_proc_info
-
- .type __pxa210_proc_info,#object
-__pxa210_proc_info:
- .long 0x69052120
- .long 0xfffff3f0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_pxa210_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __pxa210_proc_info, . - __pxa210_proc_info
-
- .type __ixp2400_proc_info, #object
-__ixp2400_proc_info:
- .long 0x69054190
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_ixp2400_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __ixp2400_proc_info, . - __ixp2400_proc_info
-
- .type __ixp2800_proc_info, #object
-__ixp2800_proc_info:
- .long 0x690541a0
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_ixp2800_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __ixp2800_proc_info, . - __ixp2800_proc_info
-
- .type __ixp42x_proc_info, #object
-__ixp42x_proc_info:
- .long 0x690541c0
- .long 0xffffffc0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_ixp42x_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __ixp42x_proc_info, . - __ixp42x_proc_info
-
- .type __ixp43x_proc_info, #object
-__ixp43x_proc_info:
- .long 0x69054040
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_ixp43x_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __ixp43x_proc_info, . - __ixp43x_proc_info
-
- .type __ixp46x_proc_info, #object
-__ixp46x_proc_info:
- .long 0x69054200
- .long 0xffffff00
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_ixp46x_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __ixp46x_proc_info, . - __ixp46x_proc_info
-
- .type __pxa255_proc_info,#object
-__pxa255_proc_info:
- .long 0x69052d00
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_pxa255_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __pxa255_proc_info, . - __pxa255_proc_info
-
- .type __pxa270_proc_info,#object
-__pxa270_proc_info:
- .long 0x69054110
- .long 0xfffffff0
- .long PMD_TYPE_SECT | \
- PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __xscale_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
- .long cpu_pxa270_name
- .long xscale_processor_functions
- .long v4wbi_tlb_fns
- .long xscale_mc_user_fns
- .long xscale_cache_fns
- .size __pxa270_proc_info, . - __pxa270_proc_info
-
+ .ifb \cache
+ .long xscale_cache_fns
+ .else
+ .long \cache
+ .endif
+ .size __\name\()_proc_info, . - __\name\()_proc_info
+.endm
+
+ xscale_proc_info 80200_A0_A1, 0x69052000, 0xfffffffe, cpu_80200_name, \
+ cache=xscale_80200_A0_A1_cache_fns
+ xscale_proc_info 80200, 0x69052000, 0xfffffff0, cpu_80200_name
+ xscale_proc_info 80219, 0x69052e20, 0xffffffe0, cpu_80219_name
+ xscale_proc_info 8032x, 0x69052420, 0xfffff7e0, cpu_8032x_name
+ xscale_proc_info 8033x, 0x69054010, 0xfffffd30, cpu_8033x_name
+ xscale_proc_info pxa250, 0x69052100, 0xfffff7f0, cpu_pxa250_name
+ xscale_proc_info pxa210, 0x69052120, 0xfffff3f0, cpu_pxa210_name
+ xscale_proc_info ixp2400, 0x69054190, 0xfffffff0, cpu_ixp2400_name
+ xscale_proc_info ixp2800, 0x690541a0, 0xfffffff0, cpu_ixp2800_name
+ xscale_proc_info ixp42x, 0x690541c0, 0xffffffc0, cpu_ixp42x_name
+ xscale_proc_info ixp43x, 0x69054040, 0xfffffff0, cpu_ixp43x_name
+ xscale_proc_info ixp46x, 0x69054200, 0xffffff00, cpu_ixp46x_name
+ xscale_proc_info pxa255, 0x69052d00, 0xfffffff0, cpu_pxa255_name
+ xscale_proc_info pxa270, 0x69054110, 0xfffffff0, cpu_pxa270_name
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
mcr p15, 0, r3, c7, c10, 4 @ data write barrier
mov pc, lr
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB
mcr p15, 0, r3, c7, c10, 4 @ data write barrier
- mcr p15, 0, r3, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb)
mov pc, lr
__INITDATA
- .type fa_tlb_fns, #object
-ENTRY(fa_tlb_fns)
- .long fa_flush_user_tlb_range
- .long fa_flush_kern_tlb_range
- .long fa_tlb_flags
- .size fa_tlb_fns, . - fa_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions fa, fa_tlb_flags
__INITDATA
- .type v3_tlb_fns, #object
-ENTRY(v3_tlb_fns)
- .long v3_flush_user_tlb_range
- .long v3_flush_kern_tlb_range
- .long v3_tlb_flags
- .size v3_tlb_fns, . - v3_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v3, v3_tlb_flags
__INITDATA
- .type v4_tlb_fns, #object
-ENTRY(v4_tlb_fns)
- .long v4_flush_user_tlb_range
- .long v4_flush_kern_tlb_range
- .long v4_tlb_flags
- .size v4_tlb_fns, . - v4_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v4, v4_tlb_flags
__INITDATA
- .type v4wb_tlb_fns, #object
-ENTRY(v4wb_tlb_fns)
- .long v4wb_flush_user_tlb_range
- .long v4wb_flush_kern_tlb_range
- .long v4wb_tlb_flags
- .size v4wb_tlb_fns, . - v4wb_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v4wb, v4wb_tlb_flags
__INITDATA
- .type v4wbi_tlb_fns, #object
-ENTRY(v4wbi_tlb_fns)
- .long v4wbi_flush_user_tlb_range
- .long v4wbi_flush_kern_tlb_range
- .long v4wbi_tlb_flags
- .size v4wbi_tlb_fns, . - v4wbi_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v4wbi, v4wbi_tlb_flags
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier
mov pc, lr
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier
- mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
+ mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb)
mov pc, lr
__INIT
- .type v6wbi_tlb_fns, #object
-ENTRY(v6wbi_tlb_fns)
- .long v6wbi_flush_user_tlb_range
- .long v6wbi_flush_kern_tlb_range
- .long v6wbi_tlb_flags
- .size v6wbi_tlb_fns, . - v6wbi_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v6wbi, v6wbi_tlb_flags
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mov ip, #0
- ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable
- ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB
dsb
mov pc, lr
ENDPROC(v7wbi_flush_user_tlb_range)
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
- mov r2, #0
- ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable
- ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB
dsb
isb
mov pc, lr
__INIT
- .type v7wbi_tlb_fns, #object
-ENTRY(v7wbi_tlb_fns)
- .long v7wbi_flush_user_tlb_range
- .long v7wbi_flush_kern_tlb_range
- ALT_SMP(.long v7wbi_tlb_flags_smp)
- ALT_UP(.long v7wbi_tlb_flags_up)
- .size v7wbi_tlb_fns, . - v7wbi_tlb_fns
+ /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */
+ define_tlb_functions v7wbi, v7wbi_tlb_flags_up, flags_smp=v7wbi_tlb_flags_smp
movs \irqnr, \irqnr
#endif
.endm
-
- @ irq priority table (not used)
- .macro irq_prio_table
- .endm
}
#endif /* CONFIG_PM */
-static int __init omap34xx_sram_init(void)
-{
- _omap3_sram_configure_core_dpll =
- omap_sram_push(omap3_sram_configure_core_dpll,
- omap3_sram_configure_core_dpll_sz);
- omap_push_sram_idle();
- return 0;
-}
-#else
+#endif /* CONFIG_ARCH_OMAP3 */
+
static inline int omap34xx_sram_init(void)
{
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+ omap3_sram_restore_context();
+#endif
return 0;
}
-#endif
int __init omap_sram_init(void)
{
.text
- /* s3c_cpu_save
- *
- * entry:
- * r1 = v:p offset
- */
-
-ENTRY(s3c_cpu_save)
- stmfd sp!, { r4 - r12, lr }
- ldr r3, =resume_with_mmu
- bl cpu_suspend
-
- @@ jump to final code to send system to sleep
- ldr r0, =pm_cpu_sleep
- @@ldr pc, [ r0 ]
- ldr r0, [ r0 ]
- mov pc, r0
-
- @@ return to the caller, after having the MMU
- @@ turned on, this restores the last bits from the
- @@ stack
-resume_with_mmu:
- ldmfd sp!, { r4 - r12, pc }
-
- .ltorg
-
/* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* s3c_cpu_resume entry.
/* per-cpu sleep functions */
extern void (*pm_cpu_prep)(void);
-extern void (*pm_cpu_sleep)(void);
+extern int (*pm_cpu_sleep)(unsigned long);
/* Flags for PM Control */
/* from sleep.S */
-extern int s3c_cpu_save(unsigned long *saveblk, long);
extern void s3c_cpu_resume(void);
-extern void s3c2410_cpu_suspend(void);
+extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
#include <linux/io.h>
#include <asm/cacheflush.h>
+#include <asm/suspend.h>
#include <mach/hardware.h>
#include <mach/map.h>
void (*pm_cpu_prep)(void);
-void (*pm_cpu_sleep)(void);
+int (*pm_cpu_sleep)(unsigned long);
#define any_allowed(mask, allow) (((mask) & (allow)) != (allow))
s3c_pm_arch_stop_clocks();
- /* s3c_cpu_save will also act as our return point from when
+ /* this will also act as our return point from when
* we resume as it saves its own register state and restores it
* during the resume. */
- s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
-
- /* restore the cpu state using the kernel's cpu init code. */
-
- cpu_init();
+ cpu_suspend(0, pm_cpu_sleep);
/* restore the system state */
bne look_for_VFP_exceptions @ VFP is already enabled
DBGSTR1 "enable %x", r10
- ldr r3, last_VFP_context_address
+ ldr r3, vfp_current_hw_state_address
orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set
- ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer
+ ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer
bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled
- cmp r4, r10
- beq check_for_exception @ we are returning to the same
- @ process, so the registers are
- @ still there. In this case, we do
- @ not want to drop a pending exception.
+ cmp r4, r10 @ this thread owns the hw context?
+#ifndef CONFIG_SMP
+ @ For UP, checking that this thread owns the hw context is
+ @ sufficient to determine that the hardware state is valid.
+ beq vfp_hw_state_valid
+
+ @ On UP, we lazily save the VFP context. As a different
+ @ thread wants ownership of the VFP hardware, save the old
+ @ state if there was a previous (valid) owner.
VFPFMXR FPEXC, r5 @ enable VFP, disable any pending
@ exceptions, so we can get at the
@ rest of it
-#ifndef CONFIG_SMP
- @ Save out the current registers to the old thread state
- @ No need for SMP since this is not done lazily
-
DBGSTR1 "save old state %p", r4
- cmp r4, #0
- beq no_old_VFP_process
+ cmp r4, #0 @ if the vfp_current_hw_state is NULL
+ beq vfp_reload_hw @ then the hw state needs reloading
VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
#ifndef CONFIG_CPU_FEROCEON
1:
#endif
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
- @ and point r4 at the word at the
- @ start of the register dump
+vfp_reload_hw:
+
+#else
+ @ For SMP, if this thread does not own the hw context, then we
+ @ need to reload it. No need to save the old state as on SMP,
+ @ we always save the state when we switch away from a thread.
+ bne vfp_reload_hw
+
+ @ This thread has ownership of the current hardware context.
+ @ However, it may have been migrated to another CPU, in which
+ @ case the saved state is newer than the hardware context.
+ @ Check this by looking at the CPU number which the state was
+ @ last loaded onto.
+ ldr ip, [r10, #VFP_CPU]
+ teq ip, r11
+ beq vfp_hw_state_valid
+
+vfp_reload_hw:
+ @ We're loading this threads state into the VFP hardware. Update
+ @ the CPU number which contains the most up to date VFP context.
+ str r11, [r10, #VFP_CPU]
+
+ VFPFMXR FPEXC, r5 @ enable VFP, disable any pending
+ @ exceptions, so we can get at the
+ @ rest of it
#endif
-no_old_VFP_process:
DBGSTR1 "load state %p", r10
- str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer
+ str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer
@ Load the saved state back into the VFP
VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
#endif
VFPFMXR FPSCR, r5 @ restore status
-check_for_exception:
+@ The context stored in the VFP hardware is up to date with this thread
+vfp_hw_state_valid:
tst r1, #FPEXC_EX
bne process_exception @ might as well handle the pending
@ exception before retrying branch
ENDPROC(vfp_save_state)
.align
-last_VFP_context_address:
- .word last_VFP_context
+vfp_current_hw_state_address:
+ .word vfp_current_hw_state
.macro tbl_branch, base, tmp, shift
#ifdef CONFIG_THUMB2_KERNEL
void vfp_null_entry(void);
void (*vfp_vector)(void) = vfp_null_entry;
-union vfp_state *last_VFP_context[NR_CPUS];
/*
* Dual-use variable.
*/
unsigned int VFP_arch;
+/*
+ * The pointer to the vfpstate structure of the thread which currently
+ * owns the context held in the VFP hardware, or NULL if the hardware
+ * context is invalid.
+ *
+ * For UP, this is sufficient to tell which thread owns the VFP context.
+ * However, for SMP, we also need to check the CPU number stored in the
+ * saved state too to catch migrations.
+ */
+union vfp_state *vfp_current_hw_state[NR_CPUS];
+
+/*
+ * Is 'thread's most up to date state stored in this CPUs hardware?
+ * Must be called from non-preemptible context.
+ */
+static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread)
+{
+#ifdef CONFIG_SMP
+ if (thread->vfpstate.hard.cpu != cpu)
+ return false;
+#endif
+ return vfp_current_hw_state[cpu] == &thread->vfpstate;
+}
+
+/*
+ * Force a reload of the VFP context from the thread structure. We do
+ * this by ensuring that access to the VFP hardware is disabled, and
+ * clear last_VFP_context. Must be called from non-preemptible context.
+ */
+static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
+{
+ if (vfp_state_in_hw(cpu, thread)) {
+ fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+ vfp_current_hw_state[cpu] = NULL;
+ }
+#ifdef CONFIG_SMP
+ thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
+}
+
/*
* Per-thread VFP initialization.
*/
union vfp_state *vfp = &thread->vfpstate;
unsigned int cpu;
- memset(vfp, 0, sizeof(union vfp_state));
-
- vfp->hard.fpexc = FPEXC_EN;
- vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-
/*
* Disable VFP to ensure we initialize it first. We must ensure
- * that the modification of last_VFP_context[] and hardware disable
- * are done for the same CPU and without preemption.
+ * that the modification of vfp_current_hw_state[] and hardware
+ * disable are done for the same CPU and without preemption.
+ *
+ * Do this first to ensure that preemption won't overwrite our
+ * state saving should access to the VFP be enabled at this point.
*/
cpu = get_cpu();
- if (last_VFP_context[cpu] == vfp)
- last_VFP_context[cpu] = NULL;
+ if (vfp_current_hw_state[cpu] == vfp)
+ vfp_current_hw_state[cpu] = NULL;
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
put_cpu();
+
+ memset(vfp, 0, sizeof(union vfp_state));
+
+ vfp->hard.fpexc = FPEXC_EN;
+ vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+#ifdef CONFIG_SMP
+ vfp->hard.cpu = NR_CPUS;
+#endif
}
static void vfp_thread_exit(struct thread_info *thread)
union vfp_state *vfp = &thread->vfpstate;
unsigned int cpu = get_cpu();
- if (last_VFP_context[cpu] == vfp)
- last_VFP_context[cpu] = NULL;
+ if (vfp_current_hw_state[cpu] == vfp)
+ vfp_current_hw_state[cpu] = NULL;
put_cpu();
}
vfp_sync_hwstate(parent);
thread->vfpstate = parent->vfpstate;
+#ifdef CONFIG_SMP
+ thread->vfpstate.hard.cpu = NR_CPUS;
+#endif
}
/*
* case the thread migrates to a different CPU. The
* restoring is done lazily.
*/
- if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) {
- vfp_save_state(last_VFP_context[cpu], fpexc);
- last_VFP_context[cpu]->hard.cpu = cpu;
- }
- /*
- * Thread migration, just force the reloading of the
- * state on the new CPU in case the VFP registers
- * contain stale data.
- */
- if (thread->vfpstate.hard.cpu != cpu)
- last_VFP_context[cpu] = NULL;
+ if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu])
+ vfp_save_state(vfp_current_hw_state[cpu], fpexc);
#endif
/*
}
/* clear any information we had about last context state */
- memset(last_VFP_context, 0, sizeof(last_VFP_context));
+ memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state));
return 0;
}
static inline void vfp_pm_init(void) { }
#endif /* CONFIG_PM */
+/*
+ * Ensure that the VFP state stored in 'thread->vfpstate' is up to date
+ * with the hardware state.
+ */
void vfp_sync_hwstate(struct thread_info *thread)
{
unsigned int cpu = get_cpu();
- /*
- * If the thread we're interested in is the current owner of the
- * hardware VFP state, then we need to save its state.
- */
- if (last_VFP_context[cpu] == &thread->vfpstate) {
+ if (vfp_state_in_hw(cpu, thread)) {
u32 fpexc = fmrx(FPEXC);
/*
put_cpu();
}
+/* Ensure that the thread reloads the hardware VFP state on the next use. */
void vfp_flush_hwstate(struct thread_info *thread)
{
unsigned int cpu = get_cpu();
- /*
- * If the thread we're interested in is the current owner of the
- * hardware VFP state, then we need to save its state.
- */
- if (last_VFP_context[cpu] == &thread->vfpstate) {
- u32 fpexc = fmrx(FPEXC);
+ vfp_force_reload(cpu, thread);
- fmxr(FPEXC, fpexc & ~FPEXC_EN);
-
- /*
- * Set the context to NULL to force a reload the next time
- * the thread uses the VFP.
- */
- last_VFP_context[cpu] = NULL;
- }
-
-#ifdef CONFIG_SMP
- /*
- * For SMP we still have to take care of the case where the thread
- * migrates to another CPU and then back to the original CPU on which
- * the last VFP user is still the same thread. Mark the thread VFP
- * state as belonging to a non-existent CPU so that the saved one will
- * be reloaded in the above case.
- */
- thread->vfpstate.hard.cpu = NR_CPUS;
-#endif
put_cpu();
}
void *hcpu)
{
if (action == CPU_DYING || action == CPU_DYING_FROZEN) {
- unsigned int cpu = (long)hcpu;
- last_VFP_context[cpu] = NULL;
+ vfp_force_reload((long)hcpu, current_thread_info());
} else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN)
vfp_enable(NULL);
return NOTIFY_OK;
elf_hwcap |= HWCAP_VFPv3D16;
}
#endif
-#ifdef CONFIG_NEON
/*
* Check for the presence of the Advanced SIMD
* load/store instructions, integer and single
* for NEON if the hardware has the MVFR registers.
*/
if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) {
+#ifdef CONFIG_NEON
if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
elf_hwcap |= HWCAP_NEON;
- }
#endif
+ if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
+ elf_hwcap |= HWCAP_VFPv4;
+ }
}
return 0;
}
}
mmc->ops = &mmci_ops;
- mmc->f_min = (host->mclk + 511) / 512;
+ /*
+ * The ARM and ST versions of the block have slightly different
+ * clock divider equations which means that the minimum divider
+ * differs too.
+ */
+ if (variant->st_clkdiv)
+ mmc->f_min = DIV_ROUND_UP(host->mclk, 257);
+ else
+ mmc->f_min = DIV_ROUND_UP(host->mclk, 512);
/*
* If the platform data supplies a maximum operating
* frequency, this takes precedence. Else, we fall back
projects / linux-block.git / commitdiff