With the removal of widget setup during BE hw_params, the DAI config IPC
is never sent with the SOF_DAI_CONFIG_FLAGS_HW_PARAMS. This means that
the early bit clock feature required for certain codecs will be broken.
Fix this by saving the config flags sent during BE DAI hw_params and
reusing it when the DAI_CONFIG IPC is sent after the DAI widget is set
up. Also, free the DAI config before the widget is freed.
The DAI_CONFIG IPC sent during the sof_widget_free() does not have the
DAI index information. So, save the dai_index in the config during
hw_params and reuse it during hw_free.
For IPC4, do not clear the node ID during hw_free. It will be needed for
freeing the group_ida during unprepare.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230307114639.4553-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
break;
case SOF_DAI_INTEL_ALH:
if (data) {
- config->dai_index = data->dai_index;
+ /* save the dai_index during hw_params and reuse it for hw_free */
+ if (flags & SOF_DAI_CONFIG_FLAGS_HW_PARAMS)
+ config->dai_index = data->dai_index;
config->alh.stream_id = data->dai_data;
}
break;
break;
}
- config->flags = flags;
+ /*
+ * The dai_config op is invoked several times and the flags argument varies as below:
+ * BE DAI hw_params: When the op is invoked during the BE DAI hw_params, flags contains
+ * SOF_DAI_CONFIG_FLAGS_HW_PARAMS along with quirks
+ * FE DAI hw_params: When invoked during FE DAI hw_params after the DAI widget has
+ * just been set up in the DSP, flags is set to SOF_DAI_CONFIG_FLAGS_HW_PARAMS with no
+ * quirks
+ * BE DAI trigger: When invoked during the BE DAI trigger, flags is set to
+ * SOF_DAI_CONFIG_FLAGS_PAUSE and contains no quirks
+ * BE DAI hw_free: When invoked during the BE DAI hw_free, flags is set to
+ * SOF_DAI_CONFIG_FLAGS_HW_FREE and contains no quirks
+ * FE DAI hw_free: When invoked during the FE DAI hw_free, flags is set to
+ * SOF_DAI_CONFIG_FLAGS_HW_FREE and contains no quirks
+ *
+ * The DAI_CONFIG IPC is sent to the DSP, only after the widget is set up during the FE
+ * DAI hw_params. But since the BE DAI hw_params precedes the FE DAI hw_params, the quirks
+ * need to be preserved when assigning the flags before sending the IPC.
+ * For the case of PAUSE/HW_FREE, since there are no quirks, flags can be used as is.
+ */
+
+ if (flags & SOF_DAI_CONFIG_FLAGS_HW_PARAMS)
+ config->flags |= flags;
+ else
+ config->flags = flags;
/* only send the IPC if the widget is set up in the DSP */
if (swidget->use_count > 0) {
&reply, sizeof(reply));
if (ret < 0)
dev_err(sdev->dev, "Failed to set dai config for %s\n", dai->name);
+
+ /* clear the flags once the IPC has been sent even if it fails */
+ config->flags = SOF_DAI_CONFIG_FLAGS_NONE;
}
return ret;
ipc4_copier = dai->private;
if (ipc4_copier->dai_type == SOF_DAI_INTEL_ALH) {
+ struct sof_ipc4_copier_data *copier_data = &ipc4_copier->data;
struct sof_ipc4_alh_configuration_blob *blob;
unsigned int group_id;
ALH_MULTI_GTW_BASE;
ida_free(&alh_group_ida, group_id);
}
+
+ /* clear the node ID */
+ copier_data->gtw_cfg.node_id &= ~SOF_IPC4_NODE_INDEX_MASK;
}
}
pipeline->skip_during_fe_trigger = true;
fallthrough;
case SOF_DAI_INTEL_ALH:
- copier_data->gtw_cfg.node_id &= ~SOF_IPC4_NODE_INDEX_MASK;
- copier_data->gtw_cfg.node_id |= SOF_IPC4_NODE_INDEX(data->dai_data);
+ /*
+ * Do not clear the node ID when this op is invoked with
+ * SOF_DAI_CONFIG_FLAGS_HW_FREE. It is needed to free the group_ida during
+ * unprepare.
+ */
+ if (flags & SOF_DAI_CONFIG_FLAGS_HW_PARAMS) {
+ copier_data->gtw_cfg.node_id &= ~SOF_IPC4_NODE_INDEX_MASK;
+ copier_data->gtw_cfg.node_id |= SOF_IPC4_NODE_INDEX(data->dai_data);
+ }
break;
case SOF_DAI_INTEL_DMIC:
case SOF_DAI_INTEL_SSP:
/* reset route setup status for all routes that contain this widget */
sof_reset_route_setup_status(sdev, swidget);
+ /* free DAI config and continue to free widget even if it fails */
+ if (WIDGET_IS_DAI(swidget->id)) {
+ struct snd_sof_dai_config_data data;
+ unsigned int flags = SOF_DAI_CONFIG_FLAGS_HW_FREE;
+
+ data.dai_data = DMA_CHAN_INVALID;
+
+ if (tplg_ops && tplg_ops->dai_config) {
+ err = tplg_ops->dai_config(sdev, swidget, flags, &data);
+ if (err < 0)
+ dev_err(sdev->dev, "failed to free config for widget %s\n",
+ swidget->widget->name);
+ }
+ }
+
/* continue to disable core even if IPC fails */
- if (tplg_ops && tplg_ops->widget_free)
- err = tplg_ops->widget_free(sdev, swidget);
+ if (tplg_ops && tplg_ops->widget_free) {
+ ret = tplg_ops->widget_free(sdev, swidget);
+ if (ret < 0 && !err)
+ err = ret;
+ }
/*
* disable widget core. continue to route setup status and complete flag
/* send config for DAI components */
if (WIDGET_IS_DAI(swidget->id)) {
- unsigned int flags = SOF_DAI_CONFIG_FLAGS_NONE;
+ unsigned int flags = SOF_DAI_CONFIG_FLAGS_HW_PARAMS;
+ /*
+ * The config flags saved during BE DAI hw_params will be used for IPC3. IPC4 does
+ * not use the flags argument.
+ */
if (tplg_ops && tplg_ops->dai_config) {
ret = tplg_ops->dai_config(sdev, swidget, flags, NULL);
if (ret < 0)