arm: mvebu: enable the SD card slot on Armada 370 DB board
authorThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fri, 21 Dec 2012 14:49:08 +0000 (15:49 +0100)
committerArnd Bergmann <arnd@arndb.de>
Thu, 28 Feb 2013 17:57:10 +0000 (18:57 +0100)
The Armada XP DB evaluation board has one SD card slot, directly
connected to the SDIO IP of the SoC, so we add a device tree
description for it.

However, in the default configuration of the board, the SD card slot
is not usable: the connector plugged into CON40 must be changed
against a different one, provided with the board by the
manufacturer. Since such a manual modification of the hardware is
needed, we did not enable the SDIO interface by default, and left it
to the board user to modify the Device Tree if needed. Since this
board is really only an evaluation board for developers and not a
final product, it is not too bad.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
arch/arm/boot/dts/armada-370-db.dts

index 9b82facb2561cfdb1cbc9cda25f5021668752e4a..8e66a7c00e1878de235b033af47e4bdf7bce2b82 100644 (file)
                        phy = <&phy1>;
                        phy-mode = "rgmii-id";
                };
+
+               mvsdio@d00d4000 {
+                       pinctrl-0 = <&sdio_pins1>;
+                       pinctrl-names = "default";
+                       /*
+                        * This device is disabled by default, because
+                        * using the SD card connector requires
+                        * changing the default CON40 connector
+                        * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a
+                        * different connector
+                        * "DB-88F6710_MPP_RGMII_SD_Jumper".
+                        */
+                       status = "disabled";
+                       /* No CD or WP GPIOs */
+               };
        };
 };