--- /dev/null
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2003, 2004 Paul Mundt
+ * Copyright (C) 2004 Richard Curnow
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Support functions for the SH5 PCI hardware.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rwsem.h>
+#include <linux/smp.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <asm/pci.h>
+#include <linux/irq.h>
+
+#include <asm/io.h>
+#include <asm/hardware.h>
+#include "pci_sh5.h"
+
+static unsigned long pcicr_virt;
+unsigned long pciio_virt;
+
+static void __init pci_fixup_ide_bases(struct pci_dev *d)
+{
+ int i;
+
+ /*
+ * PCI IDE controllers use non-standard I/O port decoding, respect it.
+ */
+ if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
+ return;
+ printk("PCI: IDE base address fixup for %s\n", pci_name(d));
+ for(i=0; i<4; i++) {
+ struct resource *r = &d->resource[i];
+ if ((r->start & ~0x80) == 0x374) {
+ r->start |= 2;
+ r->end = r->start;
+ }
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
+
+char * __devinit pcibios_setup(char *str)
+{
+ return str;
+}
+
+/* Rounds a number UP to the nearest power of two. Used for
+ * sizing the PCI window.
+ */
+static u32 __init r2p2(u32 num)
+{
+ int i = 31;
+ u32 tmp = num;
+
+ if (num == 0)
+ return 0;
+
+ do {
+ if (tmp & (1 << 31))
+ break;
+ i--;
+ tmp <<= 1;
+ } while (i >= 0);
+
+ tmp = 1 << i;
+ /* If the original number isn't a power of 2, round it up */
+ if (tmp != num)
+ tmp <<= 1;
+
+ return tmp;
+}
+
+extern unsigned long long memory_start, memory_end;
+
+int __init sh5pci_init(unsigned memStart, unsigned memSize)
+{
+ u32 lsr0;
+ u32 uval;
+
+ pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
+ if (!pcicr_virt) {
+ panic("Unable to remap PCICR\n");
+ }
+
+ pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
+ if (!pciio_virt) {
+ panic("Unable to remap PCIIO\n");
+ }
+
+ pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
+
+ /* Clear snoop registers */
+ SH5PCI_WRITE(CSCR0, 0);
+ SH5PCI_WRITE(CSCR1, 0);
+
+ pr_debug("Wrote to reg\n");
+
+ /* Switch off interrupts */
+ SH5PCI_WRITE(INTM, 0);
+ SH5PCI_WRITE(AINTM, 0);
+ SH5PCI_WRITE(PINTM, 0);
+
+ /* Set bus active, take it out of reset */
+ uval = SH5PCI_READ(CR);
+
+ /* Set command Register */
+ SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
+
+ uval=SH5PCI_READ(CR);
+ pr_debug("CR is actually 0x%08x\n",uval);
+
+ /* Allow it to be a master */
+ /* NB - WE DISABLE I/O ACCESS to stop overlap */
+ /* set WAIT bit to enable stepping, an attempt to improve stability */
+ SH5PCI_WRITE_SHORT(CSR_CMD,
+ PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
+
+ /*
+ ** Set translation mapping memory in order to convert the address
+ ** used for the main bus, to the PCI internal address.
+ */
+ SH5PCI_WRITE(MBR,0x40000000);
+
+ /* Always set the max size 512M */
+ SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
+
+ /*
+ ** I/O addresses are mapped at internal PCI specific address
+ ** as is described into the configuration bridge table.
+ ** These are changed to 0, to allow cards that have legacy
+ ** io such as vga to function correctly. We set the SH5 IOBAR to
+ ** 256K, which is a bit big as we can only have 64K of address space
+ */
+
+ SH5PCI_WRITE(IOBR,0x0);
+
+ pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
+
+ /* Set up a 256K window. Totally pointless waste of address space */
+ SH5PCI_WRITE(IOBMR,0);
+ pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
+
+ /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
+ * we would want to map the I/O region somewhere, but it is so big this is not
+ * that easy!
+ */
+ SH5PCI_WRITE(CSR_IBAR0,~0);
+ /* Set memory size value */
+ memSize = memory_end - memory_start;
+
+ /* Now we set up the mbars so the PCI bus can see the memory of the machine */
+ if (memSize < (1024 * 1024)) {
+ printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
+ return -EINVAL;
+ }
+
+ /* Set LSR 0 */
+ lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
+ SH5PCI_WRITE(LSR0, lsr0);
+
+ pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
+
+ /* Set MBAR 0 */
+ SH5PCI_WRITE(CSR_MBAR0, memory_start);
+ SH5PCI_WRITE(LAR0, memory_start);
+
+ SH5PCI_WRITE(CSR_MBAR1,0);
+ SH5PCI_WRITE(LAR1,0);
+ SH5PCI_WRITE(LSR1,0);
+
+ pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
+ pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
+
+ /* Enable the PCI interrupts on the device */
+ SH5PCI_WRITE(INTM, ~0);
+ SH5PCI_WRITE(AINTM, ~0);
+ SH5PCI_WRITE(PINTM, ~0);
+
+ pr_debug("Switching on all error interrupts\n");
+
+ return(0);
+}
+
+static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 *val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
+ break;
+ case 2:
+ *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
+ break;
+ case 4:
+ *val = SH5PCI_READ(PDR);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
+ int size, u32 val)
+{
+ SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
+
+ switch (size) {
+ case 1:
+ SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
+ break;
+ case 2:
+ SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
+ break;
+ case 4:
+ SH5PCI_WRITE(PDR, val);
+ break;
+ }
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static struct pci_ops pci_config_ops = {
+ .read = sh5pci_read,
+ .write = sh5pci_write,
+};
+
+/* Everything hangs off this */
+static struct pci_bus *pci_root_bus;
+
+
+static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
+{
+ pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
+ dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
+ return PCI_SLOT(dev->devfn);
+}
+
+static inline u8 bridge_swizzle(u8 pin, u8 slot)
+{
+ return (((pin-1) + slot) % 4) + 1;
+}
+
+u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
+{
+ if (dev->bus->number != 0) {
+ u8 pin = *pinp;
+ do {
+ pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
+ /* Move up the chain of bridges. */
+ dev = dev->bus->self;
+ } while (dev->bus->self);
+ *pinp = pin;
+
+ /* The slot is the slot of the last bridge. */
+ }
+
+ return PCI_SLOT(dev->devfn);
+}
+
+/* This needs to be shunted out of here into the board specific bit */
+
+static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ int result = -1;
+
+ /* The complication here is that the PCI IRQ lines from the Cayman's 2
+ 5V slots get into the CPU via a different path from the IRQ lines
+ from the 3 3.3V slots. Thus, we have to detect whether the card's
+ interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
+ at the point where we cross from 5V to 3.3V is not the normal case.
+
+ The added complication is that we don't know that the 5V slots are
+ always bus 2, because a card containing a PCI-PCI bridge may be
+ plugged into a 3.3V slot, and this changes the bus numbering.
+
+ Also, the Cayman has an intermediate PCI bus that goes a custom
+ expansion board header (and to the secondary bridge). This bus has
+ never been used in practice.
+
+ The 1ary onboard PCI-PCI bridge is device 3 on bus 0
+ The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
+ */
+
+ struct slot_pin {
+ int slot;
+ int pin;
+ } path[4];
+ int i=0;
+
+ while (dev->bus->number > 0) {
+
+ slot = path[i].slot = PCI_SLOT(dev->devfn);
+ pin = path[i].pin = bridge_swizzle(pin, slot);
+ dev = dev->bus->self;
+ i++;
+ if (i > 3) panic("PCI path to root bus too long!\n");
+ }
+
+ slot = PCI_SLOT(dev->devfn);
+ /* This is the slot on bus 0 through which the device is eventually
+ reachable. */
+
+ /* Now work back up. */
+ if ((slot < 3) || (i == 0)) {
+ /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
+ swizzle now. */
+ result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
+ } else {
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ if (slot > 0) {
+ panic("PCI expansion bus device found - not handled!\n");
+ } else {
+ if (i > 0) {
+ /* 5V slots */
+ i--;
+ slot = path[i].slot;
+ pin = path[i].pin;
+ /* 'pin' was swizzled earlier wrt slot, don't do it again. */
+ result = IRQ_P2INTA + (pin - 1);
+ } else {
+ /* IRQ for 2ary PCI-PCI bridge : unused */
+ result = -1;
+ }
+ }
+ }
+
+ return result;
+}
+
+static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+ unsigned pci_int, pci_air, pci_cir, pci_aint;
+
+ pci_int = SH5PCI_READ(INT);
+ pci_cir = SH5PCI_READ(CIR);
+ pci_air = SH5PCI_READ(AIR);
+
+ if (pci_int) {
+ printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
+ printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(INT, ~0);
+ }
+
+ pci_aint = SH5PCI_READ(AINT);
+ if (pci_aint) {
+ printk("PCI ARB INTERRUPT!\n");
+ printk("PCI AINT -> 0x%x\n", pci_aint);
+ printk("PCI AIR -> 0x%x\n", pci_air);
+ printk("PCI CIR -> 0x%x\n", pci_cir);
+ SH5PCI_WRITE(AINT, ~0);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
+{
+ printk("SERR IRQ\n");
+
+ return IRQ_NONE;
+}
+
+static void __init
+pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
+ struct resource *memr)
+{
+ struct resource io_res, mem_res;
+ struct pci_dev *dev;
+ struct pci_dev *bridge = bus->self;
+ struct list_head *ln;
+
+ if (!bridge)
+ return; /* host bridge, nothing to do */
+
+ /* set reasonable default locations for pcibios_align_resource */
+ io_res.start = PCIBIOS_MIN_IO;
+ mem_res.start = PCIBIOS_MIN_MEM;
+
+ io_res.end = io_res.start;
+ mem_res.end = mem_res.start;
+
+ /* Collect information about how our direct children are layed out. */
+ for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
+ int i;
+ dev = pci_dev_b(ln);
+
+ /* Skip bridges for now */
+ if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
+ continue;
+
+ for (i = 0; i < PCI_NUM_RESOURCES; i++) {
+ struct resource res;
+ unsigned long size;
+
+ memcpy(&res, &dev->resource[i], sizeof(res));
+ size = res.end - res.start + 1;
+
+ if (res.flags & IORESOURCE_IO) {
+ res.start = io_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ io_res.end = res.start + size;
+ } else if (res.flags & IORESOURCE_MEM) {
+ res.start = mem_res.end;
+ pcibios_align_resource(dev, &res, size, 0);
+ mem_res.end = res.start + size;
+ }
+ }
+ }
+
+ /* And for all of the subordinate busses. */
+ for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
+ pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
+
+ /* turn the ending locations into sizes (subtract start) */
+ io_res.end -= io_res.start;
+ mem_res.end -= mem_res.start;
+
+ /* Align the sizes up by bridge rules */
+ io_res.end = ALIGN(io_res.end, 4*1024) - 1;
+ mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
+
+ /* Adjust the bridge's allocation requirements */
+ bridge->resource[0].end = bridge->resource[0].start + io_res.end;
+ bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
+
+ bridge->resource[PCI_BRIDGE_RESOURCES].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
+ bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
+
+ /* adjust parent's resource requirements */
+ if (ior) {
+ ior->end = ALIGN(ior->end, 4*1024);
+ ior->end += io_res.end;
+ }
+
+ if (memr) {
+ memr->end = ALIGN(memr->end, 1*1024*1024);
+ memr->end += mem_res.end;
+ }
+}
+
+static void __init pcibios_size_bridges(void)
+{
+ struct resource io_res, mem_res;
+
+ memset(&io_res, 0, sizeof(io_res));
+ memset(&mem_res, 0, sizeof(mem_res));
+
+ pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
+}
+
+static int __init pcibios_init(void)
+{
+ if (request_irq(IRQ_ERR, pcish5_err_irq,
+ IRQF_DISABLED, "PCI Error",NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
+ return -EINVAL;
+ }
+
+ if (request_irq(IRQ_SERR, pcish5_serr_irq,
+ IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
+ printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
+ return -EINVAL;
+ }
+
+ /* The pci subsystem needs to know where memory is and how much
+ * of it there is. I've simply made these globals. A better mechanism
+ * is probably needed.
+ */
+ sh5pci_init(__pa(memory_start),
+ __pa(memory_end) - __pa(memory_start));
+
+ pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
+ pcibios_size_bridges();
+ pci_assign_unassigned_resources();
+ pci_fixup_irqs(no_swizzle, map_cayman_irq);
+
+ return 0;
+}
+
+subsys_initcall(pcibios_init);
+
+void __devinit pcibios_fixup_bus(struct pci_bus *bus)
+{
+ struct pci_dev *dev = bus->self;
+ int i;
+
+#if 1
+ if(dev) {
+ for(i=0; i<3; i++) {
+ bus->resource[i] =
+ &dev->resource[PCI_BRIDGE_RESOURCES+i];
+ bus->resource[i]->name = bus->name;
+ }
+ bus->resource[0]->flags |= IORESOURCE_IO;
+ bus->resource[1]->flags |= IORESOURCE_MEM;
+
+ /* For now, propagate host limits to the bus;
+ * we'll adjust them later. */
+
+#if 1
+ bus->resource[0]->end = 64*1024 - 1 ;
+ bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
+ bus->resource[0]->start = PCIBIOS_MIN_IO;
+ bus->resource[1]->start = PCIBIOS_MIN_MEM;
+#else
+ bus->resource[0]->end = 0;
+ bus->resource[1]->end = 0;
+ bus->resource[0]->start =0;
+ bus->resource[1]->start = 0;
+#endif
+ /* Turn off downstream PF memory address range by default */
+ bus->resource[2]->start = 1024*1024;
+ bus->resource[2]->end = bus->resource[2]->start - 1;
+ }
+#endif
+
+}
+
--- /dev/null
+/*
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License. See linux/COPYING for more information.
+ *
+ * Definitions for the SH5 PCI hardware.
+ */
+
+/* Product ID */
+#define PCISH5_PID 0x350d
+
+/* vendor ID */
+#define PCISH5_VID 0x1054
+
+/* Configuration types */
+#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
+#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
+
+/* VCR data */
+#define PCISH5_VCR_STATUS 0x00
+#define PCISH5_VCR_VERSION 0x08
+
+/*
+** ICR register offsets and bits
+*/
+#define PCISH5_ICR_CR 0x100 /* PCI control register values */
+#define CR_PBAM (1<<12)
+#define CR_PFCS (1<<11)
+#define CR_FTO (1<<10)
+#define CR_PFE (1<<9)
+#define CR_TBS (1<<8)
+#define CR_SPUE (1<<7)
+#define CR_BMAM (1<<6)
+#define CR_HOST (1<<5)
+#define CR_CLKEN (1<<4)
+#define CR_SOCS (1<<3)
+#define CR_IOCS (1<<2)
+#define CR_RSTCTL (1<<1)
+#define CR_CFINT (1<<0)
+#define CR_LOCK_MASK 0xa5000000
+
+#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
+#define INT_MADIM (1<<2)
+
+#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
+#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
+#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
+#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
+#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
+#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
+#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
+#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
+#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
+#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
+#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
+#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
+#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
+#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
+#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
+#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
+#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
+#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
+#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
+#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
+
+/* These are configs space registers */
+#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
+#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
+#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
+#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
+#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
+#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
+#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
+
+
+
+/* Base address of registers */
+#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
+#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
+/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
+
+/* Register selection macro */
+#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
+/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
+
+/* Write I/O functions */
+#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
+#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
+
+/* Read I/O functions */
+#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
+#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
+
+/* Set PCI config bits */
+#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
+
+/* Set PCI command register */
+#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
+
+/* Size converters */
+#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
+
+
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_32.o \
ptrace_32.o semaphore.o setup.o signal_32.o sys_sh.o sys_sh32.o \
- syscalls_32.o time.o topology.o traps.o traps_32.o
+ syscalls_32.o time_32.o topology.o traps.o traps_32.o
obj-y += cpu/ timers/
obj-$(CONFIG_VSYSCALL) += vsyscall/
obj-y := debugtraps.o io.o io_generic.o irq.o machvec.o process_64.o \
ptrace_64.o semaphore.o setup.o signal_64.o sys_sh.o sys_sh64.o \
- syscalls_64.o time.o topology.o traps.o traps_64.o
+ syscalls_64.o time_64.o topology.o traps.o traps_64.o
obj-y += cpu/ timers/
obj-$(CONFIG_VSYSCALL) += vsyscall/
+++ /dev/null
-/*
- * arch/sh/kernel/time.c
- *
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- * Copyright (C) 2002 - 2007 Paul Mundt
- * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
- *
- * Some code taken from i386 version.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- */
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/clockchips.h>
-#include <asm/clock.h>
-#include <asm/rtc.h>
-#include <asm/timer.h>
-#include <asm/kgdb.h>
-
-struct sys_timer *sys_timer;
-
-/* Move this somewhere more sensible.. */
-DEFINE_SPINLOCK(rtc_lock);
-EXPORT_SYMBOL(rtc_lock);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
- tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
- return 0;
-}
-
-/*
- * Null high precision timer functions for systems lacking one.
- */
-static cycle_t null_hpt_read(void)
-{
- return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-#ifndef CONFIG_GENERIC_TIME
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- /*
- * Turn off IRQs when grabbing xtime_lock, so that
- * the sys_timer get_offset code doesn't have to handle it.
- */
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = get_timer_offset();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / NSEC_PER_USEC;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= get_timer_offset() * NSEC_PER_USEC;
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
-
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-#endif /* !CONFIG_GENERIC_TIME */
-
-#ifndef CONFIG_GENERIC_CLOCKEVENTS
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * handle_timer_tick() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-void handle_timer_tick(void)
-{
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- if (current->pid)
- profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
- if (sh_mv.mv_heartbeat != NULL)
- sh_mv.mv_heartbeat();
-#endif
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_sh_set_time(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* do it again in 60s */
- last_rtc_update = xtime.tv_sec - 600;
- }
-}
-#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
-
-#ifdef CONFIG_PM
-int timer_suspend(struct sys_device *dev, pm_message_t state)
-{
- struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
- sys_timer->ops->stop();
-
- return 0;
-}
-
-int timer_resume(struct sys_device *dev)
-{
- struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
-
- sys_timer->ops->start();
-
- return 0;
-}
-#else
-#define timer_suspend NULL
-#define timer_resume NULL
-#endif
-
-static struct sysdev_class timer_sysclass = {
- .name = "timer",
- .suspend = timer_suspend,
- .resume = timer_resume,
-};
-
-static int __init timer_init_sysfs(void)
-{
- int ret = sysdev_class_register(&timer_sysclass);
- if (ret != 0)
- return ret;
-
- sys_timer->dev.cls = &timer_sysclass;
- return sysdev_register(&sys_timer->dev);
-}
-device_initcall(timer_init_sysfs);
-
-void (*board_time_init)(void);
-
-/*
- * Shamelessly based on the MIPS and Sparc64 work.
- */
-static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
-unsigned long sh_hpt_frequency = 0;
-
-#define NSEC_PER_CYC_SHIFT 10
-
-struct clocksource clocksource_sh = {
- .name = "SuperH",
- .rating = 200,
- .mask = CLOCKSOURCE_MASK(32),
- .read = null_hpt_read,
- .shift = 16,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static void __init init_sh_clocksource(void)
-{
- if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read)
- return;
-
- clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency,
- clocksource_sh.shift);
-
- timer_ticks_per_nsec_quotient =
- clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT);
-
- clocksource_register(&clocksource_sh);
-}
-
-#ifdef CONFIG_GENERIC_TIME
-unsigned long long sched_clock(void)
-{
- unsigned long long ticks = clocksource_sh.read();
- return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT;
-}
-#endif
-
-void __init time_init(void)
-{
- if (board_time_init)
- board_time_init();
-
- clk_init();
-
- rtc_sh_get_time(&xtime);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
- /*
- * Find the timer to use as the system timer, it will be
- * initialized for us.
- */
- sys_timer = get_sys_timer();
- printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
-
- if (sys_timer->ops->read)
- clocksource_sh.read = sys_timer->ops->read;
-
- init_sh_clocksource();
-
- if (sh_hpt_frequency)
- printk("Using %lu.%03lu MHz high precision timer.\n",
- ((sh_hpt_frequency + 500) / 1000) / 1000,
- ((sh_hpt_frequency + 500) / 1000) % 1000);
-
-#if defined(CONFIG_SH_KGDB)
- /*
- * Set up kgdb as requested. We do it here because the serial
- * init uses the timer vars we just set up for figuring baud.
- */
- kgdb_init();
-#endif
-}
--- /dev/null
+/*
+ * arch/sh/kernel/time.c
+ *
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
+ * Copyright (C) 2002 - 2007 Paul Mundt
+ * Copyright (C) 2002 M. R. Brown <mrbrown@linux-sh.org>
+ *
+ * Some code taken from i386 version.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/timex.h>
+#include <linux/sched.h>
+#include <linux/clockchips.h>
+#include <asm/clock.h>
+#include <asm/rtc.h>
+#include <asm/timer.h>
+#include <asm/kgdb.h>
+
+struct sys_timer *sys_timer;
+
+/* Move this somewhere more sensible.. */
+DEFINE_SPINLOCK(rtc_lock);
+EXPORT_SYMBOL(rtc_lock);
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+/*
+ * Null high precision timer functions for systems lacking one.
+ */
+static cycle_t null_hpt_read(void)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+#ifndef CONFIG_GENERIC_TIME
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ /*
+ * Turn off IRQs when grabbing xtime_lock, so that
+ * the sys_timer get_offset code doesn't have to handle it.
+ */
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = get_timer_offset();
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / NSEC_PER_USEC;
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+EXPORT_SYMBOL(do_gettimeofday);
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= get_timer_offset() * NSEC_PER_USEC;
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ ntp_clear();
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+EXPORT_SYMBOL(do_settimeofday);
+#endif /* !CONFIG_GENERIC_TIME */
+
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+/* last time the RTC clock got updated */
+static long last_rtc_update;
+
+/*
+ * handle_timer_tick() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+void handle_timer_tick(void)
+{
+ do_timer(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(get_irq_regs()));
+#endif
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+
+#ifdef CONFIG_HEARTBEAT
+ if (sh_mv.mv_heartbeat != NULL)
+ sh_mv.mv_heartbeat();
+#endif
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if (ntp_synced() &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ if (rtc_sh_set_time(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+#endif /* !CONFIG_GENERIC_CLOCKEVENTS */
+
+#ifdef CONFIG_PM
+int timer_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->stop();
+
+ return 0;
+}
+
+int timer_resume(struct sys_device *dev)
+{
+ struct sys_timer *sys_timer = container_of(dev, struct sys_timer, dev);
+
+ sys_timer->ops->start();
+
+ return 0;
+}
+#else
+#define timer_suspend NULL
+#define timer_resume NULL
+#endif
+
+static struct sysdev_class timer_sysclass = {
+ .name = "timer",
+ .suspend = timer_suspend,
+ .resume = timer_resume,
+};
+
+static int __init timer_init_sysfs(void)
+{
+ int ret = sysdev_class_register(&timer_sysclass);
+ if (ret != 0)
+ return ret;
+
+ sys_timer->dev.cls = &timer_sysclass;
+ return sysdev_register(&sys_timer->dev);
+}
+device_initcall(timer_init_sysfs);
+
+void (*board_time_init)(void);
+
+/*
+ * Shamelessly based on the MIPS and Sparc64 work.
+ */
+static unsigned long timer_ticks_per_nsec_quotient __read_mostly;
+unsigned long sh_hpt_frequency = 0;
+
+#define NSEC_PER_CYC_SHIFT 10
+
+struct clocksource clocksource_sh = {
+ .name = "SuperH",
+ .rating = 200,
+ .mask = CLOCKSOURCE_MASK(32),
+ .read = null_hpt_read,
+ .shift = 16,
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init init_sh_clocksource(void)
+{
+ if (!sh_hpt_frequency || clocksource_sh.read == null_hpt_read)
+ return;
+
+ clocksource_sh.mult = clocksource_hz2mult(sh_hpt_frequency,
+ clocksource_sh.shift);
+
+ timer_ticks_per_nsec_quotient =
+ clocksource_hz2mult(sh_hpt_frequency, NSEC_PER_CYC_SHIFT);
+
+ clocksource_register(&clocksource_sh);
+}
+
+#ifdef CONFIG_GENERIC_TIME
+unsigned long long sched_clock(void)
+{
+ unsigned long long ticks = clocksource_sh.read();
+ return (ticks * timer_ticks_per_nsec_quotient) >> NSEC_PER_CYC_SHIFT;
+}
+#endif
+
+void __init time_init(void)
+{
+ if (board_time_init)
+ board_time_init();
+
+ clk_init();
+
+ rtc_sh_get_time(&xtime);
+ set_normalized_timespec(&wall_to_monotonic,
+ -xtime.tv_sec, -xtime.tv_nsec);
+
+ /*
+ * Find the timer to use as the system timer, it will be
+ * initialized for us.
+ */
+ sys_timer = get_sys_timer();
+ printk(KERN_INFO "Using %s for system timer\n", sys_timer->name);
+
+ if (sys_timer->ops->read)
+ clocksource_sh.read = sys_timer->ops->read;
+
+ init_sh_clocksource();
+
+ if (sh_hpt_frequency)
+ printk("Using %lu.%03lu MHz high precision timer.\n",
+ ((sh_hpt_frequency + 500) / 1000) / 1000,
+ ((sh_hpt_frequency + 500) / 1000) % 1000);
+
+#if defined(CONFIG_SH_KGDB)
+ /*
+ * Set up kgdb as requested. We do it here because the serial
+ * init uses the timer vars we just set up for figuring baud.
+ */
+ kgdb_init();
+#endif
+}
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * arch/sh64/kernel/time.c
+ *
+ * Copyright (C) 2000, 2001 Paolo Alberelli
+ * Copyright (C) 2003 - 2007 Paul Mundt
+ * Copyright (C) 2003 Richard Curnow
+ *
+ * Original TMU/RTC code taken from sh version.
+ * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
+ * Some code taken from i386 version.
+ * Copyright (C) 1991, 1992, 1995 Linus Torvalds
+ */
+#include <linux/errno.h>
+#include <linux/rwsem.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/profile.h>
+#include <linux/smp.h>
+#include <linux/module.h>
+#include <linux/bcd.h>
+#include <linux/timex.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <asm/cpu/registers.h> /* required by inline __asm__ stmt. */
+#include <asm/cpu/irq.h>
+#include <asm/addrspace.h>
+#include <asm/processor.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+
+#define TMU_TOCR_INIT 0x00
+#define TMU0_TCR_INIT 0x0020
+#define TMU_TSTR_INIT 1
+#define TMU_TSTR_OFF 0
+
+/* Real Time Clock */
+#define RTC_BLOCK_OFF 0x01040000
+#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
+#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */
+#define RTC_RCR1 (rtc_base + 0x38)
+
+/* Clock, Power and Reset Controller */
+#define CPRC_BLOCK_OFF 0x01010000
+#define CPRC_BASE PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
+
+#define FRQCR (cprc_base+0x0)
+#define WTCSR (cprc_base+0x0018)
+#define STBCR (cprc_base+0x0030)
+
+/* Time Management Unit */
+#define TMU_BLOCK_OFF 0x01020000
+#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
+#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0)
+#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1)
+#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2)
+
+#define TMU_TOCR tmu_base+0x0 /* Byte access */
+#define TMU_TSTR tmu_base+0x4 /* Byte access */
+
+#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */
+#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */
+#define TMU0_TCR TMU0_BASE+0x8 /* Word access */
+
+#define TICK_SIZE (tick_nsec / 1000)
+
+static unsigned long tmu_base, rtc_base;
+unsigned long cprc_base;
+
+/* Variables to allow interpolation of time of day to resolution better than a
+ * jiffy. */
+
+/* This is effectively protected by xtime_lock */
+static unsigned long ctc_last_interrupt;
+static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
+
+#define CTC_JIFFY_SCALE_SHIFT 40
+
+/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
+static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
+
+/* Estimate number of microseconds that have elapsed since the last timer tick,
+ by scaling the delta that has occurred in the CTC register.
+
+ WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
+ the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
+ in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm
+ probably needs to use TMU.TCNT0 instead. This will work even if the CPU is
+ sleeping, though will be coarser.
+
+ FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
+ is running or if the freq or tick arguments of adjtimex are modified after
+ we have calibrated the scaling factor? This will result in either a jump at
+ the end of a tick period, or a wrap backwards at the start of the next one,
+ if the application is reading the time of day often enough. I think we
+ ought to do better than this. For this reason, usecs_per_jiffy is left
+ separated out in the calculation below. This allows some future hook into
+ the adjtime-related stuff in kernel/timer.c to remove this hazard.
+
+*/
+
+static unsigned long usecs_since_tick(void)
+{
+ unsigned long long current_ctc;
+ long ctc_ticks_since_interrupt;
+ unsigned long long ull_ctc_ticks_since_interrupt;
+ unsigned long result;
+
+ unsigned long long mul1_out;
+ unsigned long long mul1_out_high;
+ unsigned long long mul2_out_low, mul2_out_high;
+
+ /* Read CTC register */
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ /* Note, the CTC counts down on each CPU clock, not up.
+ Note(2), use long type to get correct wraparound arithmetic when
+ the counter crosses zero. */
+ ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
+ ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
+
+ /* Inline assembly to do 32x32x32->64 multiplier */
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul1_out) :
+ "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
+
+ mul1_out_high = mul1_out >> 32;
+
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_low) :
+ "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
+
+#if 1
+ asm volatile ("mulu.l %1, %2, %0" :
+ "=r" (mul2_out_high) :
+ "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
+#endif
+
+ result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
+
+ return result;
+}
+
+void do_gettimeofday(struct timeval *tv)
+{
+ unsigned long flags;
+ unsigned long seq;
+ unsigned long usec, sec;
+
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ usec = usecs_since_tick();
+ sec = xtime.tv_sec;
+ usec += xtime.tv_nsec / 1000;
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+
+ while (usec >= 1000000) {
+ usec -= 1000000;
+ sec++;
+ }
+
+ tv->tv_sec = sec;
+ tv->tv_usec = usec;
+}
+
+int do_settimeofday(struct timespec *tv)
+{
+ time_t wtm_sec, sec = tv->tv_sec;
+ long wtm_nsec, nsec = tv->tv_nsec;
+
+ if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
+ return -EINVAL;
+
+ write_seqlock_irq(&xtime_lock);
+ /*
+ * This is revolting. We need to set "xtime" correctly. However, the
+ * value in this location is the value at the most recent update of
+ * wall time. Discover what correction gettimeofday() would have
+ * made, and then undo it!
+ */
+ nsec -= 1000 * usecs_since_tick();
+
+ wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
+ wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
+
+ set_normalized_timespec(&xtime, sec, nsec);
+ set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
+
+ ntp_clear();
+ write_sequnlock_irq(&xtime_lock);
+ clock_was_set();
+
+ return 0;
+}
+EXPORT_SYMBOL(do_settimeofday);
+
+/* Dummy RTC ops */
+static void null_rtc_get_time(struct timespec *tv)
+{
+ tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
+ tv->tv_nsec = 0;
+}
+
+static int null_rtc_set_time(const time_t secs)
+{
+ return 0;
+}
+
+void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
+int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
+
+/* last time the RTC clock got updated */
+static long last_rtc_update;
+
+/*
+ * timer_interrupt() needs to keep up the real-time clock,
+ * as well as call the "do_timer()" routine every clocktick
+ */
+static inline void do_timer_interrupt(void)
+{
+ unsigned long long current_ctc;
+ asm ("getcon cr62, %0" : "=r" (current_ctc));
+ ctc_last_interrupt = (unsigned long) current_ctc;
+
+ do_timer(1);
+#ifndef CONFIG_SMP
+ update_process_times(user_mode(get_irq_regs()));
+#endif
+ if (current->pid)
+ profile_tick(CPU_PROFILING);
+
+#ifdef CONFIG_HEARTBEAT
+ if (sh_mv.mv_heartbeat != NULL)
+ sh_mv.mv_heartbeat();
+#endif
+
+ /*
+ * If we have an externally synchronized Linux clock, then update
+ * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
+ * called as close as possible to 500 ms before the new second starts.
+ */
+ if (ntp_synced() &&
+ xtime.tv_sec > last_rtc_update + 660 &&
+ (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
+ (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
+ if (rtc_sh_set_time(xtime.tv_sec) == 0)
+ last_rtc_update = xtime.tv_sec;
+ else
+ /* do it again in 60 s */
+ last_rtc_update = xtime.tv_sec - 600;
+ }
+}
+
+/*
+ * This is the same as the above, except we _also_ save the current
+ * Time Stamp Counter value at the time of the timer interrupt, so that
+ * we later on can estimate the time of day more exactly.
+ */
+static irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ unsigned long timer_status;
+
+ /* Clear UNF bit */
+ timer_status = ctrl_inw(TMU0_TCR);
+ timer_status &= ~0x100;
+ ctrl_outw(timer_status, TMU0_TCR);
+
+ /*
+ * Here we are in the timer irq handler. We just have irqs locally
+ * disabled but we don't know if the timer_bh is running on the other
+ * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
+ * the irq version of write_lock because as just said we have irq
+ * locally disabled. -arca
+ */
+ write_lock(&xtime_lock);
+ do_timer_interrupt();
+ write_unlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+
+static __init unsigned int get_cpu_hz(void)
+{
+ unsigned int count;
+ unsigned long __dummy;
+ unsigned long ctc_val_init, ctc_val;
+
+ /*
+ ** Regardless the toolchain, force the compiler to use the
+ ** arbitrary register r3 as a clock tick counter.
+ ** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
+ */
+ register unsigned long long __rtc_irq_flag __asm__ ("r3");
+
+ local_irq_enable();
+ do {} while (ctrl_inb(rtc_base) != 0);
+ ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
+
+ /*
+ * r3 is arbitrary. CDC does not support "=z".
+ */
+ ctc_val_init = 0xffffffff;
+ ctc_val = ctc_val_init;
+
+ asm volatile("gettr tr0, %1\n\t"
+ "putcon %0, " __CTC "\n\t"
+ "and %2, r63, %2\n\t"
+ "pta $+4, tr0\n\t"
+ "beq/l %2, r63, tr0\n\t"
+ "ptabs %1, tr0\n\t"
+ "getcon " __CTC ", %0\n\t"
+ : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
+ : "0" (0));
+ local_irq_disable();
+ /*
+ * SH-3:
+ * CPU clock = 4 stages * loop
+ * tst rm,rm if id ex
+ * bt/s 1b if id ex
+ * add #1,rd if id ex
+ * (if) pipe line stole
+ * tst rm,rm if id ex
+ * ....
+ *
+ *
+ * SH-4:
+ * CPU clock = 6 stages * loop
+ * I don't know why.
+ * ....
+ *
+ * SH-5:
+ * Use CTC register to count. This approach returns the right value
+ * even if the I-cache is disabled (e.g. whilst debugging.)
+ *
+ */
+
+ count = ctc_val_init - ctc_val; /* CTC counts down */
+
+#if defined (CONFIG_SH_SIMULATOR)
+ /*
+ * Let's pretend we are a 5MHz SH-5 to avoid a too
+ * little timer interval. Also to keep delay
+ * calibration within a reasonable time.
+ */
+ return 5000000;
+#else
+ /*
+ * This really is count by the number of clock cycles
+ * by the ratio between a complete R64CNT
+ * wrap-around (128) and CUI interrupt being raised (64).
+ */
+ return count*2;
+#endif
+}
+
+static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
+{
+ struct pt_regs *regs = get_irq_regs();
+
+ ctrl_outb(0, RTC_RCR1); /* Disable Carry Interrupts */
+ regs->regs[3] = 1; /* Using r3 */
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction irq0 = {
+ .handler = timer_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "timer",
+};
+static struct irqaction irq1 = {
+ .handler = sh64_rtc_interrupt,
+ .flags = IRQF_DISABLED,
+ .mask = CPU_MASK_NONE,
+ .name = "rtc",
+};
+
+void __init time_init(void)
+{
+ unsigned int cpu_clock, master_clock, bus_clock, module_clock;
+ unsigned long interval;
+ unsigned long frqcr, ifc, pfc;
+ static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
+#define bfc_table ifc_table /* Same */
+#define pfc_table ifc_table /* Same */
+
+ tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
+ if (!tmu_base) {
+ panic("Unable to remap TMU\n");
+ }
+
+ rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
+ if (!rtc_base) {
+ panic("Unable to remap RTC\n");
+ }
+
+ cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
+ if (!cprc_base) {
+ panic("Unable to remap CPRC\n");
+ }
+
+ rtc_sh_get_time(&xtime);
+
+ setup_irq(TIMER_IRQ, &irq0);
+ setup_irq(RTC_IRQ, &irq1);
+
+ /* Check how fast it is.. */
+ cpu_clock = get_cpu_hz();
+
+ /* Note careful order of operations to maintain reasonable precision and avoid overflow. */
+ scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
+
+ free_irq(RTC_IRQ, NULL);
+
+ printk("CPU clock: %d.%02dMHz\n",
+ (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
+ {
+ unsigned short bfc;
+ frqcr = ctrl_inl(FRQCR);
+ ifc = ifc_table[(frqcr>> 6) & 0x0007];
+ bfc = bfc_table[(frqcr>> 3) & 0x0007];
+ pfc = pfc_table[(frqcr>> 12) & 0x0007];
+ master_clock = cpu_clock * ifc;
+ bus_clock = master_clock/bfc;
+ }
+
+ printk("Bus clock: %d.%02dMHz\n",
+ (bus_clock/1000000), (bus_clock % 1000000)/10000);
+ module_clock = master_clock/pfc;
+ printk("Module clock: %d.%02dMHz\n",
+ (module_clock/1000000), (module_clock % 1000000)/10000);
+ interval = (module_clock/(HZ*4));
+
+ printk("Interval = %ld\n", interval);
+
+ current_cpu_data.cpu_clock = cpu_clock;
+ current_cpu_data.master_clock = master_clock;
+ current_cpu_data.bus_clock = bus_clock;
+ current_cpu_data.module_clock = module_clock;
+
+ /* Start TMU0 */
+ ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
+ ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
+ ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
+ ctrl_outl(interval, TMU0_TCOR);
+ ctrl_outl(interval, TMU0_TCNT);
+ ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
+}
+
+void enter_deep_standby(void)
+{
+ /* Disable watchdog timer */
+ ctrl_outl(0xa5000000, WTCSR);
+ /* Configure deep standby on sleep */
+ ctrl_outl(0x03, STBCR);
+
+#ifdef CONFIG_SH_ALPHANUMERIC
+ {
+ extern void mach_alphanum(int position, unsigned char value);
+ extern void mach_alphanum_brightness(int setting);
+ char halted[] = "Halted. ";
+ int i;
+ mach_alphanum_brightness(6); /* dimmest setting above off */
+ for (i=0; i<8; i++) {
+ mach_alphanum(i, halted[i]);
+ }
+ asm __volatile__ ("synco");
+ }
+#endif
+
+ asm __volatile__ ("sleep");
+ asm __volatile__ ("synci");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ asm __volatile__ ("nop");
+ panic("Unexpected wakeup!\n");
+}
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ /* RTC base, filled in by rtc_init */
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ /* Period IRQ */
+ .start = IRQ_PRI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* Carry IRQ */
+ .start = IRQ_CUI,
+ .flags = IORESOURCE_IRQ,
+ },
+ [3] = {
+ /* Alarm IRQ */
+ .start = IRQ_ATI,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device rtc_device = {
+ .name = "sh-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+ .resource = rtc_resources,
+};
+
+static int __init rtc_init(void)
+{
+ rtc_resources[0].start = rtc_base;
+ rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1;
+
+ return platform_device_register(&rtc_device);
+}
+device_initcall(rtc_init);
+++ /dev/null
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2000, 2001 Paolo Alberelli
-# Copyright (C) 2003 Paul Mundt
-#
-# Makefile for the Linux sh64 kernel.
-#
-# Note! Dependencies are done automagically by 'make dep', which also
-# removes any old dependencies. DON'T put your own dependencies here
-# unless it's something special (ie not a .c file).
-#
-
-extra-y := head.o init_task.o vmlinux.lds
-
-obj-y := process.o signal.o entry.o traps.o irq.o irq_intc.o \
- ptrace.o setup.o time.o sys_sh64.o semaphore.o sh_ksyms.o \
- switchto.o syscalls.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o
-obj-$(CONFIG_SH_ALPHANUMERIC) += alphanum.o
-obj-$(CONFIG_SH_DMA) += dma.o
-obj-$(CONFIG_SH_FPU) += fpu.o
-obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_KALLSYMS) += unwind.o
-obj-$(CONFIG_PCI) += pcibios.o
-obj-$(CONFIG_MODULES) += module.o
-
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_CPU_SH5) += pci_sh5.o
-endif
-
-USE_STANDARD_AS_RULE := true
-
+++ /dev/null
-/*
- * arch/sh64/kernel/alphanum.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Machine-independent functions for handling 8-digit alphanumeric display
- * (e.g. Agilent HDSP-253x)
- */
-#include <linux/stddef.h>
-#include <linux/sched.h>
-
-void mach_alphanum(int pos, unsigned char val);
-
-void print_seg(char *file, int line)
-{
- int i;
- unsigned int nibble;
-
- for (i = 0; i < 5; i++) {
- mach_alphanum(i, file[i]);
- }
-
- for (i = 0; i < 3; i++) {
- nibble = ((line >> (i * 4)) & 0xf);
- mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
- }
-}
-
-void print_seg_num(unsigned num)
-{
- int i;
- unsigned int nibble;
-
- for (i = 0; i < 8; i++) {
- nibble = ((num >> (i * 4)) & 0xf);
-
- mach_alphanum(7 - i, nibble + ((nibble > 9) ? 55 : 48));
- }
-}
-
+++ /dev/null
-/*
- * arch/sh64/kernel/dma.c
- *
- * DMA routines for the SH-5 DMAC.
- *
- * Copyright (C) 2003 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include <linux/mm.h>
-#include <asm/hardware.h>
-#include <asm/dma.h>
-#include <asm/signal.h>
-#include <asm/errno.h>
-#include <asm/io.h>
-
-typedef struct {
- unsigned long dev_addr;
- unsigned long mem_addr;
-
- unsigned int mode;
- unsigned int count;
-} dma_info_t;
-
-static dma_info_t dma_info[MAX_DMA_CHANNELS];
-static DEFINE_SPINLOCK(dma_spin_lock);
-
-/* arch/sh64/kernel/irq_intc.c */
-extern void make_intc_irq(unsigned int irq);
-
-/* DMAC Interrupts */
-#define DMA_IRQ_DMTE0 18
-#define DMA_IRQ_DERR 22
-
-#define DMAC_COMMON_BASE (dmac_base + 0x08)
-#define DMAC_SAR_BASE (dmac_base + 0x10)
-#define DMAC_DAR_BASE (dmac_base + 0x18)
-#define DMAC_COUNT_BASE (dmac_base + 0x20)
-#define DMAC_CTRL_BASE (dmac_base + 0x28)
-#define DMAC_STATUS_BASE (dmac_base + 0x30)
-
-#define DMAC_SAR(n) (DMAC_SAR_BASE + ((n) * 0x28))
-#define DMAC_DAR(n) (DMAC_DAR_BASE + ((n) * 0x28))
-#define DMAC_COUNT(n) (DMAC_COUNT_BASE + ((n) * 0x28))
-#define DMAC_CTRL(n) (DMAC_CTRL_BASE + ((n) * 0x28))
-#define DMAC_STATUS(n) (DMAC_STATUS_BASE + ((n) * 0x28))
-
-/* DMAC.COMMON Bit Definitions */
-#define DMAC_COMMON_PR 0x00000001 /* Priority */
- /* Bits 1-2 Reserved */
-#define DMAC_COMMON_ME 0x00000008 /* Master Enable */
-#define DMAC_COMMON_NMI 0x00000010 /* NMI Flag */
- /* Bits 5-6 Reserved */
-#define DMAC_COMMON_ER 0x00000780 /* Error Response */
-#define DMAC_COMMON_AAE 0x00007800 /* Address Alignment Error */
- /* Bits 15-63 Reserved */
-
-/* DMAC.SAR Bit Definitions */
-#define DMAC_SAR_ADDR 0xffffffff /* Source Address */
-
-/* DMAC.DAR Bit Definitions */
-#define DMAC_DAR_ADDR 0xffffffff /* Destination Address */
-
-/* DMAC.COUNT Bit Definitions */
-#define DMAC_COUNT_CNT 0xffffffff /* Transfer Count */
-
-/* DMAC.CTRL Bit Definitions */
-#define DMAC_CTRL_TS 0x00000007 /* Transfer Size */
-#define DMAC_CTRL_SI 0x00000018 /* Source Increment */
-#define DMAC_CTRL_DI 0x00000060 /* Destination Increment */
-#define DMAC_CTRL_RS 0x00000780 /* Resource Select */
-#define DMAC_CTRL_IE 0x00000800 /* Interrupt Enable */
-#define DMAC_CTRL_TE 0x00001000 /* Transfer Enable */
- /* Bits 15-63 Reserved */
-
-/* DMAC.STATUS Bit Definitions */
-#define DMAC_STATUS_TE 0x00000001 /* Transfer End */
-#define DMAC_STATUS_AAE 0x00000002 /* Address Alignment Error */
- /* Bits 2-63 Reserved */
-
-static unsigned long dmac_base;
-
-void set_dma_count(unsigned int chan, unsigned int count);
-void set_dma_addr(unsigned int chan, unsigned int addr);
-
-static irqreturn_t dma_mte(int irq, void *dev_id, struct pt_regs *regs)
-{
- unsigned int chan = irq - DMA_IRQ_DMTE0;
- dma_info_t *info = dma_info + chan;
- u64 status;
-
- if (info->mode & DMA_MODE_WRITE) {
- sh64_out64(info->mem_addr & DMAC_SAR_ADDR, DMAC_SAR(chan));
- } else {
- sh64_out64(info->mem_addr & DMAC_DAR_ADDR, DMAC_DAR(chan));
- }
-
- set_dma_count(chan, info->count);
-
- /* Clear the TE bit */
- status = sh64_in64(DMAC_STATUS(chan));
- status &= ~DMAC_STATUS_TE;
- sh64_out64(status, DMAC_STATUS(chan));
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_dmte = {
- .handler = dma_mte,
- .flags = IRQF_DISABLED,
- .name = "DMA MTE",
-};
-
-static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs)
-{
- u64 tmp;
- u8 chan;
-
- printk(KERN_NOTICE "DMAC: Got a DMA Error!\n");
-
- tmp = sh64_in64(DMAC_COMMON_BASE);
-
- /* Check for the type of error */
- if ((chan = tmp & DMAC_COMMON_AAE)) {
- /* It's an address alignment error.. */
- printk(KERN_NOTICE "DMAC: Alignment error on channel %d, ", chan);
-
- printk(KERN_NOTICE "SAR: 0x%08llx, DAR: 0x%08llx, COUNT: %lld\n",
- (sh64_in64(DMAC_SAR(chan)) & DMAC_SAR_ADDR),
- (sh64_in64(DMAC_DAR(chan)) & DMAC_DAR_ADDR),
- (sh64_in64(DMAC_COUNT(chan)) & DMAC_COUNT_CNT));
-
- } else if ((chan = tmp & DMAC_COMMON_ER)) {
- /* Something else went wrong.. */
- printk(KERN_NOTICE "DMAC: Error on channel %d\n", chan);
- }
-
- /* Reset the ME bit to clear the interrupt */
- tmp |= DMAC_COMMON_ME;
- sh64_out64(tmp, DMAC_COMMON_BASE);
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq_derr = {
- .handler = dma_err,
- .flags = IRQF_DISABLED,
- .name = "DMA Error",
-};
-
-static inline unsigned long calc_xmit_shift(unsigned int chan)
-{
- return sh64_in64(DMAC_CTRL(chan)) & 0x03;
-}
-
-void setup_dma(unsigned int chan, dma_info_t *info)
-{
- unsigned int irq = DMA_IRQ_DMTE0 + chan;
- dma_info_t *dma = dma_info + chan;
-
- make_intc_irq(irq);
- setup_irq(irq, &irq_dmte);
- dma = info;
-}
-
-void enable_dma(unsigned int chan)
-{
- u64 ctrl;
-
- ctrl = sh64_in64(DMAC_CTRL(chan));
- ctrl |= DMAC_CTRL_TE;
- sh64_out64(ctrl, DMAC_CTRL(chan));
-}
-
-void disable_dma(unsigned int chan)
-{
- u64 ctrl;
-
- ctrl = sh64_in64(DMAC_CTRL(chan));
- ctrl &= ~DMAC_CTRL_TE;
- sh64_out64(ctrl, DMAC_CTRL(chan));
-}
-
-void set_dma_mode(unsigned int chan, char mode)
-{
- dma_info_t *info = dma_info + chan;
-
- info->mode = mode;
-
- set_dma_addr(chan, info->mem_addr);
- set_dma_count(chan, info->count);
-}
-
-void set_dma_addr(unsigned int chan, unsigned int addr)
-{
- dma_info_t *info = dma_info + chan;
- unsigned long sar, dar;
-
- info->mem_addr = addr;
- sar = (info->mode & DMA_MODE_WRITE) ? info->mem_addr : info->dev_addr;
- dar = (info->mode & DMA_MODE_WRITE) ? info->dev_addr : info->mem_addr;
-
- sh64_out64(sar & DMAC_SAR_ADDR, DMAC_SAR(chan));
- sh64_out64(dar & DMAC_SAR_ADDR, DMAC_DAR(chan));
-}
-
-void set_dma_count(unsigned int chan, unsigned int count)
-{
- dma_info_t *info = dma_info + chan;
- u64 tmp;
-
- info->count = count;
-
- tmp = (info->count >> calc_xmit_shift(chan)) & DMAC_COUNT_CNT;
-
- sh64_out64(tmp, DMAC_COUNT(chan));
-}
-
-unsigned long claim_dma_lock(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&dma_spin_lock, flags);
-
- return flags;
-}
-
-void release_dma_lock(unsigned long flags)
-{
- spin_unlock_irqrestore(&dma_spin_lock, flags);
-}
-
-int get_dma_residue(unsigned int chan)
-{
- return sh64_in64(DMAC_COUNT(chan) << calc_xmit_shift(chan));
-}
-
-int __init init_dma(void)
-{
- struct vcr_info vcr;
- u64 tmp;
-
- /* Remap the DMAC */
- dmac_base = onchip_remap(PHYS_DMAC_BLOCK, 1024, "DMAC");
- if (!dmac_base) {
- printk(KERN_ERR "Unable to remap DMAC\n");
- return -ENOMEM;
- }
-
- /* Report DMAC.VCR Info */
- vcr = sh64_get_vcr_info(dmac_base);
- printk("DMAC: Module ID: 0x%04x, Module version: 0x%04x\n",
- vcr.mod_id, vcr.mod_vers);
-
- /* Set the ME bit */
- tmp = sh64_in64(DMAC_COMMON_BASE);
- tmp |= DMAC_COMMON_ME;
- sh64_out64(tmp, DMAC_COMMON_BASE);
-
- /* Enable the DMAC Error Interrupt */
- make_intc_irq(DMA_IRQ_DERR);
- setup_irq(DMA_IRQ_DERR, &irq_derr);
-
- return 0;
-}
-
-static void __exit exit_dma(void)
-{
- onchip_unmap(dmac_base);
- free_irq(DMA_IRQ_DERR, 0);
-}
-
-module_init(init_dma);
-module_exit(exit_dma);
-
-MODULE_AUTHOR("Paul Mundt");
-MODULE_DESCRIPTION("DMA API for SH-5 DMAC");
-MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(setup_dma);
-EXPORT_SYMBOL(claim_dma_lock);
-EXPORT_SYMBOL(release_dma_lock);
-EXPORT_SYMBOL(enable_dma);
-EXPORT_SYMBOL(disable_dma);
-EXPORT_SYMBOL(set_dma_mode);
-EXPORT_SYMBOL(set_dma_addr);
-EXPORT_SYMBOL(set_dma_count);
-EXPORT_SYMBOL(get_dma_residue);
-
+++ /dev/null
-/*
- * arch/sh64/kernel/early_printk.c
- *
- * SH-5 Early SCIF console (cloned and hacked from sh implementation)
- *
- * Copyright (C) 2003, 2004 Paul Mundt <lethal@linux-sh.org>
- * Copyright (C) 2002 M. R. Brown <mrbrown@0xd6.org>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/hardware.h>
-
-#define SCIF_BASE_ADDR 0x01030000
-#define SCIF_ADDR_SH5 PHYS_PERIPHERAL_BLOCK+SCIF_BASE_ADDR
-
-/*
- * Fixed virtual address where SCIF is mapped (should already be done
- * in arch/sh64/kernel/head.S!).
- */
-#define SCIF_REG 0xfa030000
-
-enum {
- SCIF_SCSMR2 = SCIF_REG + 0x00,
- SCIF_SCBRR2 = SCIF_REG + 0x04,
- SCIF_SCSCR2 = SCIF_REG + 0x08,
- SCIF_SCFTDR2 = SCIF_REG + 0x0c,
- SCIF_SCFSR2 = SCIF_REG + 0x10,
- SCIF_SCFRDR2 = SCIF_REG + 0x14,
- SCIF_SCFCR2 = SCIF_REG + 0x18,
- SCIF_SCFDR2 = SCIF_REG + 0x1c,
- SCIF_SCSPTR2 = SCIF_REG + 0x20,
- SCIF_SCLSR2 = SCIF_REG + 0x24,
-};
-
-static void sh_console_putc(int c)
-{
- while (!(ctrl_inw(SCIF_SCFSR2) & 0x20))
- cpu_relax();
-
- ctrl_outb(c, SCIF_SCFTDR2);
- ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0x9f), SCIF_SCFSR2);
-
- if (c == '\n')
- sh_console_putc('\r');
-}
-
-static void sh_console_flush(void)
-{
- ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
-
- while (!(ctrl_inw(SCIF_SCFSR2) & 0x40))
- cpu_relax();
-
- ctrl_outw((ctrl_inw(SCIF_SCFSR2) & 0xbf), SCIF_SCFSR2);
-}
-
-static void sh_console_write(struct console *con, const char *s, unsigned count)
-{
- while (count-- > 0)
- sh_console_putc(*s++);
-
- sh_console_flush();
-}
-
-static int __init sh_console_setup(struct console *con, char *options)
-{
- con->cflag = CREAD | HUPCL | CLOCAL | B19200 | CS8;
-
- return 0;
-}
-
-static struct console sh_console = {
- .name = "scifcon",
- .write = sh_console_write,
- .setup = sh_console_setup,
- .flags = CON_PRINTBUFFER | CON_BOOT,
- .index = -1,
-};
-
-void __init enable_early_printk(void)
-{
- ctrl_outb(0x2a, SCIF_SCBRR2); /* 19200bps */
-
- ctrl_outw(0x04, SCIF_SCFCR2); /* Reset TFRST */
- ctrl_outw(0x10, SCIF_SCFCR2); /* TTRG0=1 */
-
- ctrl_outw(0, SCIF_SCSPTR2);
- ctrl_outw(0x60, SCIF_SCFSR2);
- ctrl_outw(0, SCIF_SCLSR2);
- ctrl_outw(0x30, SCIF_SCSCR2);
-
- register_console(&sh_console);
-}
+++ /dev/null
-/*
- * arch/sh64/kernel/led.c
- *
- * Copyright (C) 2002 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Flash the LEDs
- */
-#include <linux/stddef.h>
-#include <linux/sched.h>
-
-void mach_led(int pos, int val);
-
-/* acts like an actual heart beat -- ie thump-thump-pause... */
-void heartbeat(void)
-{
- static unsigned int cnt = 0, period = 0, dist = 0;
-
- if (cnt == 0 || cnt == dist) {
- mach_led(-1, 1);
- } else if (cnt == 7 || cnt == dist + 7) {
- mach_led(-1, 0);
- }
-
- if (++cnt > period) {
- cnt = 0;
-
- /*
- * The hyperbolic function below modifies the heartbeat period
- * length in dependency of the current (5min) load. It goes
- * through the points f(0)=126, f(1)=86, f(5)=51, f(inf)->30.
- */
- period = ((672 << FSHIFT) / (5 * avenrun[0] +
- (7 << FSHIFT))) + 30;
- dist = period / 4;
- }
-}
-
+++ /dev/null
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- * Copyright (C) 2003, 2004 Paul Mundt
- * Copyright (C) 2004 Richard Curnow
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Support functions for the SH5 PCI hardware.
- */
-
-#include <linux/kernel.h>
-#include <linux/rwsem.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/types.h>
-#include <asm/pci.h>
-#include <linux/irq.h>
-
-#include <asm/io.h>
-#include <asm/hardware.h>
-#include "pci_sh5.h"
-
-static unsigned long pcicr_virt;
-unsigned long pciio_virt;
-
-static void __init pci_fixup_ide_bases(struct pci_dev *d)
-{
- int i;
-
- /*
- * PCI IDE controllers use non-standard I/O port decoding, respect it.
- */
- if ((d->class >> 8) != PCI_CLASS_STORAGE_IDE)
- return;
- printk("PCI: IDE base address fixup for %s\n", pci_name(d));
- for(i=0; i<4; i++) {
- struct resource *r = &d->resource[i];
- if ((r->start & ~0x80) == 0x374) {
- r->start |= 2;
- r->end = r->start;
- }
- }
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
-
-char * __devinit pcibios_setup(char *str)
-{
- return str;
-}
-
-/* Rounds a number UP to the nearest power of two. Used for
- * sizing the PCI window.
- */
-static u32 __init r2p2(u32 num)
-{
- int i = 31;
- u32 tmp = num;
-
- if (num == 0)
- return 0;
-
- do {
- if (tmp & (1 << 31))
- break;
- i--;
- tmp <<= 1;
- } while (i >= 0);
-
- tmp = 1 << i;
- /* If the original number isn't a power of 2, round it up */
- if (tmp != num)
- tmp <<= 1;
-
- return tmp;
-}
-
-extern unsigned long long memory_start, memory_end;
-
-int __init sh5pci_init(unsigned memStart, unsigned memSize)
-{
- u32 lsr0;
- u32 uval;
-
- pcicr_virt = onchip_remap(SH5PCI_ICR_BASE, 1024, "PCICR");
- if (!pcicr_virt) {
- panic("Unable to remap PCICR\n");
- }
-
- pciio_virt = onchip_remap(SH5PCI_IO_BASE, 0x10000, "PCIIO");
- if (!pciio_virt) {
- panic("Unable to remap PCIIO\n");
- }
-
- pr_debug("Register base addres is 0x%08lx\n", pcicr_virt);
-
- /* Clear snoop registers */
- SH5PCI_WRITE(CSCR0, 0);
- SH5PCI_WRITE(CSCR1, 0);
-
- pr_debug("Wrote to reg\n");
-
- /* Switch off interrupts */
- SH5PCI_WRITE(INTM, 0);
- SH5PCI_WRITE(AINTM, 0);
- SH5PCI_WRITE(PINTM, 0);
-
- /* Set bus active, take it out of reset */
- uval = SH5PCI_READ(CR);
-
- /* Set command Register */
- SH5PCI_WRITE(CR, uval | CR_LOCK_MASK | CR_CFINT| CR_FTO | CR_PFE | CR_PFCS | CR_BMAM);
-
- uval=SH5PCI_READ(CR);
- pr_debug("CR is actually 0x%08x\n",uval);
-
- /* Allow it to be a master */
- /* NB - WE DISABLE I/O ACCESS to stop overlap */
- /* set WAIT bit to enable stepping, an attempt to improve stability */
- SH5PCI_WRITE_SHORT(CSR_CMD,
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_WAIT);
-
- /*
- ** Set translation mapping memory in order to convert the address
- ** used for the main bus, to the PCI internal address.
- */
- SH5PCI_WRITE(MBR,0x40000000);
-
- /* Always set the max size 512M */
- SH5PCI_WRITE(MBMR, PCISH5_MEM_SIZCONV(512*1024*1024));
-
- /*
- ** I/O addresses are mapped at internal PCI specific address
- ** as is described into the configuration bridge table.
- ** These are changed to 0, to allow cards that have legacy
- ** io such as vga to function correctly. We set the SH5 IOBAR to
- ** 256K, which is a bit big as we can only have 64K of address space
- */
-
- SH5PCI_WRITE(IOBR,0x0);
-
- pr_debug("PCI:Writing 0x%08x to IOBR\n",0);
-
- /* Set up a 256K window. Totally pointless waste of address space */
- SH5PCI_WRITE(IOBMR,0);
- pr_debug("PCI:Writing 0x%08x to IOBMR\n",0);
-
- /* The SH5 has a HUGE 256K I/O region, which breaks the PCI spec. Ideally,
- * we would want to map the I/O region somewhere, but it is so big this is not
- * that easy!
- */
- SH5PCI_WRITE(CSR_IBAR0,~0);
- /* Set memory size value */
- memSize = memory_end - memory_start;
-
- /* Now we set up the mbars so the PCI bus can see the memory of the machine */
- if (memSize < (1024 * 1024)) {
- printk(KERN_ERR "PCISH5: Ridiculous memory size of 0x%x?\n", memSize);
- return -EINVAL;
- }
-
- /* Set LSR 0 */
- lsr0 = (memSize > (512 * 1024 * 1024)) ? 0x1ff00001 : ((r2p2(memSize) - 0x100000) | 0x1);
- SH5PCI_WRITE(LSR0, lsr0);
-
- pr_debug("PCI:Writing 0x%08x to LSR0\n",lsr0);
-
- /* Set MBAR 0 */
- SH5PCI_WRITE(CSR_MBAR0, memory_start);
- SH5PCI_WRITE(LAR0, memory_start);
-
- SH5PCI_WRITE(CSR_MBAR1,0);
- SH5PCI_WRITE(LAR1,0);
- SH5PCI_WRITE(LSR1,0);
-
- pr_debug("PCI:Writing 0x%08llx to CSR_MBAR0\n",memory_start);
- pr_debug("PCI:Writing 0x%08llx to LAR0\n",memory_start);
-
- /* Enable the PCI interrupts on the device */
- SH5PCI_WRITE(INTM, ~0);
- SH5PCI_WRITE(AINTM, ~0);
- SH5PCI_WRITE(PINTM, ~0);
-
- pr_debug("Switching on all error interrupts\n");
-
- return(0);
-}
-
-static int sh5pci_read(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 *val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- *val = (u8)SH5PCI_READ_BYTE(PDR + (where & 3));
- break;
- case 2:
- *val = (u16)SH5PCI_READ_SHORT(PDR + (where & 2));
- break;
- case 4:
- *val = SH5PCI_READ(PDR);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int sh5pci_write(struct pci_bus *bus, unsigned int devfn, int where,
- int size, u32 val)
-{
- SH5PCI_WRITE(PAR, CONFIG_CMD(bus, devfn, where));
-
- switch (size) {
- case 1:
- SH5PCI_WRITE_BYTE(PDR + (where & 3), (u8)val);
- break;
- case 2:
- SH5PCI_WRITE_SHORT(PDR + (where & 2), (u16)val);
- break;
- case 4:
- SH5PCI_WRITE(PDR, val);
- break;
- }
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops pci_config_ops = {
- .read = sh5pci_read,
- .write = sh5pci_write,
-};
-
-/* Everything hangs off this */
-static struct pci_bus *pci_root_bus;
-
-
-static u8 __init no_swizzle(struct pci_dev *dev, u8 * pin)
-{
- pr_debug("swizzle for dev %d on bus %d slot %d pin is %d\n",
- dev->devfn,dev->bus->number, PCI_SLOT(dev->devfn),*pin);
- return PCI_SLOT(dev->devfn);
-}
-
-static inline u8 bridge_swizzle(u8 pin, u8 slot)
-{
- return (((pin-1) + slot) % 4) + 1;
-}
-
-u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
-{
- if (dev->bus->number != 0) {
- u8 pin = *pinp;
- do {
- pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
- /* Move up the chain of bridges. */
- dev = dev->bus->self;
- } while (dev->bus->self);
- *pinp = pin;
-
- /* The slot is the slot of the last bridge. */
- }
-
- return PCI_SLOT(dev->devfn);
-}
-
-/* This needs to be shunted out of here into the board specific bit */
-
-static int __init map_cayman_irq(struct pci_dev *dev, u8 slot, u8 pin)
-{
- int result = -1;
-
- /* The complication here is that the PCI IRQ lines from the Cayman's 2
- 5V slots get into the CPU via a different path from the IRQ lines
- from the 3 3.3V slots. Thus, we have to detect whether the card's
- interrupts go via the 5V or 3.3V path, i.e. the 'bridge swizzling'
- at the point where we cross from 5V to 3.3V is not the normal case.
-
- The added complication is that we don't know that the 5V slots are
- always bus 2, because a card containing a PCI-PCI bridge may be
- plugged into a 3.3V slot, and this changes the bus numbering.
-
- Also, the Cayman has an intermediate PCI bus that goes a custom
- expansion board header (and to the secondary bridge). This bus has
- never been used in practice.
-
- The 1ary onboard PCI-PCI bridge is device 3 on bus 0
- The 2ary onboard PCI-PCI bridge is device 0 on the 2ary bus of the 1ary bridge.
- */
-
- struct slot_pin {
- int slot;
- int pin;
- } path[4];
- int i=0;
-
- while (dev->bus->number > 0) {
-
- slot = path[i].slot = PCI_SLOT(dev->devfn);
- pin = path[i].pin = bridge_swizzle(pin, slot);
- dev = dev->bus->self;
- i++;
- if (i > 3) panic("PCI path to root bus too long!\n");
- }
-
- slot = PCI_SLOT(dev->devfn);
- /* This is the slot on bus 0 through which the device is eventually
- reachable. */
-
- /* Now work back up. */
- if ((slot < 3) || (i == 0)) {
- /* Bus 0 (incl. PCI-PCI bridge itself) : perform the final
- swizzle now. */
- result = IRQ_INTA + bridge_swizzle(pin, slot) - 1;
- } else {
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- if (slot > 0) {
- panic("PCI expansion bus device found - not handled!\n");
- } else {
- if (i > 0) {
- /* 5V slots */
- i--;
- slot = path[i].slot;
- pin = path[i].pin;
- /* 'pin' was swizzled earlier wrt slot, don't do it again. */
- result = IRQ_P2INTA + (pin - 1);
- } else {
- /* IRQ for 2ary PCI-PCI bridge : unused */
- result = -1;
- }
- }
- }
-
- return result;
-}
-
-static irqreturn_t pcish5_err_irq(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
- unsigned pci_int, pci_air, pci_cir, pci_aint;
-
- pci_int = SH5PCI_READ(INT);
- pci_cir = SH5PCI_READ(CIR);
- pci_air = SH5PCI_READ(AIR);
-
- if (pci_int) {
- printk("PCI INTERRUPT (at %08llx)!\n", regs->pc);
- printk("PCI INT -> 0x%x\n", pci_int & 0xffff);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(INT, ~0);
- }
-
- pci_aint = SH5PCI_READ(AINT);
- if (pci_aint) {
- printk("PCI ARB INTERRUPT!\n");
- printk("PCI AINT -> 0x%x\n", pci_aint);
- printk("PCI AIR -> 0x%x\n", pci_air);
- printk("PCI CIR -> 0x%x\n", pci_cir);
- SH5PCI_WRITE(AINT, ~0);
- }
-
- return IRQ_HANDLED;
-}
-
-static irqreturn_t pcish5_serr_irq(int irq, void *dev_id)
-{
- printk("SERR IRQ\n");
-
- return IRQ_NONE;
-}
-
-static void __init
-pcibios_size_bridge(struct pci_bus *bus, struct resource *ior,
- struct resource *memr)
-{
- struct resource io_res, mem_res;
- struct pci_dev *dev;
- struct pci_dev *bridge = bus->self;
- struct list_head *ln;
-
- if (!bridge)
- return; /* host bridge, nothing to do */
-
- /* set reasonable default locations for pcibios_align_resource */
- io_res.start = PCIBIOS_MIN_IO;
- mem_res.start = PCIBIOS_MIN_MEM;
-
- io_res.end = io_res.start;
- mem_res.end = mem_res.start;
-
- /* Collect information about how our direct children are layed out. */
- for (ln=bus->devices.next; ln != &bus->devices; ln=ln->next) {
- int i;
- dev = pci_dev_b(ln);
-
- /* Skip bridges for now */
- if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI)
- continue;
-
- for (i = 0; i < PCI_NUM_RESOURCES; i++) {
- struct resource res;
- unsigned long size;
-
- memcpy(&res, &dev->resource[i], sizeof(res));
- size = res.end - res.start + 1;
-
- if (res.flags & IORESOURCE_IO) {
- res.start = io_res.end;
- pcibios_align_resource(dev, &res, size, 0);
- io_res.end = res.start + size;
- } else if (res.flags & IORESOURCE_MEM) {
- res.start = mem_res.end;
- pcibios_align_resource(dev, &res, size, 0);
- mem_res.end = res.start + size;
- }
- }
- }
-
- /* And for all of the subordinate busses. */
- for (ln=bus->children.next; ln != &bus->children; ln=ln->next)
- pcibios_size_bridge(pci_bus_b(ln), &io_res, &mem_res);
-
- /* turn the ending locations into sizes (subtract start) */
- io_res.end -= io_res.start;
- mem_res.end -= mem_res.start;
-
- /* Align the sizes up by bridge rules */
- io_res.end = ALIGN(io_res.end, 4*1024) - 1;
- mem_res.end = ALIGN(mem_res.end, 1*1024*1024) - 1;
-
- /* Adjust the bridge's allocation requirements */
- bridge->resource[0].end = bridge->resource[0].start + io_res.end;
- bridge->resource[1].end = bridge->resource[1].start + mem_res.end;
-
- bridge->resource[PCI_BRIDGE_RESOURCES].end =
- bridge->resource[PCI_BRIDGE_RESOURCES].start + io_res.end;
- bridge->resource[PCI_BRIDGE_RESOURCES+1].end =
- bridge->resource[PCI_BRIDGE_RESOURCES+1].start + mem_res.end;
-
- /* adjust parent's resource requirements */
- if (ior) {
- ior->end = ALIGN(ior->end, 4*1024);
- ior->end += io_res.end;
- }
-
- if (memr) {
- memr->end = ALIGN(memr->end, 1*1024*1024);
- memr->end += mem_res.end;
- }
-}
-
-static void __init pcibios_size_bridges(void)
-{
- struct resource io_res, mem_res;
-
- memset(&io_res, 0, sizeof(io_res));
- memset(&mem_res, 0, sizeof(mem_res));
-
- pcibios_size_bridge(pci_root_bus, &io_res, &mem_res);
-}
-
-static int __init pcibios_init(void)
-{
- if (request_irq(IRQ_ERR, pcish5_err_irq,
- IRQF_DISABLED, "PCI Error",NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_PERR interrupt\n");
- return -EINVAL;
- }
-
- if (request_irq(IRQ_SERR, pcish5_serr_irq,
- IRQF_DISABLED, "PCI SERR interrupt", NULL) < 0) {
- printk(KERN_ERR "PCISH5: Cannot hook PCI_SERR interrupt\n");
- return -EINVAL;
- }
-
- /* The pci subsystem needs to know where memory is and how much
- * of it there is. I've simply made these globals. A better mechanism
- * is probably needed.
- */
- sh5pci_init(__pa(memory_start),
- __pa(memory_end) - __pa(memory_start));
-
- pci_root_bus = pci_scan_bus(0, &pci_config_ops, NULL);
- pcibios_size_bridges();
- pci_assign_unassigned_resources();
- pci_fixup_irqs(no_swizzle, map_cayman_irq);
-
- return 0;
-}
-
-subsys_initcall(pcibios_init);
-
-void __devinit pcibios_fixup_bus(struct pci_bus *bus)
-{
- struct pci_dev *dev = bus->self;
- int i;
-
-#if 1
- if(dev) {
- for(i=0; i<3; i++) {
- bus->resource[i] =
- &dev->resource[PCI_BRIDGE_RESOURCES+i];
- bus->resource[i]->name = bus->name;
- }
- bus->resource[0]->flags |= IORESOURCE_IO;
- bus->resource[1]->flags |= IORESOURCE_MEM;
-
- /* For now, propagate host limits to the bus;
- * we'll adjust them later. */
-
-#if 1
- bus->resource[0]->end = 64*1024 - 1 ;
- bus->resource[1]->end = PCIBIOS_MIN_MEM+(256*1024*1024)-1;
- bus->resource[0]->start = PCIBIOS_MIN_IO;
- bus->resource[1]->start = PCIBIOS_MIN_MEM;
-#else
- bus->resource[0]->end = 0;
- bus->resource[1]->end = 0;
- bus->resource[0]->start =0;
- bus->resource[1]->start = 0;
-#endif
- /* Turn off downstream PF memory address range by default */
- bus->resource[2]->start = 1024*1024;
- bus->resource[2]->end = bus->resource[2]->start - 1;
- }
-#endif
-
-}
-
+++ /dev/null
-/*
- * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License. See linux/COPYING for more information.
- *
- * Definitions for the SH5 PCI hardware.
- */
-
-/* Product ID */
-#define PCISH5_PID 0x350d
-
-/* vendor ID */
-#define PCISH5_VID 0x1054
-
-/* Configuration types */
-#define ST_TYPE0 0x00 /* Configuration cycle type 0 */
-#define ST_TYPE1 0x01 /* Configuration cycle type 1 */
-
-/* VCR data */
-#define PCISH5_VCR_STATUS 0x00
-#define PCISH5_VCR_VERSION 0x08
-
-/*
-** ICR register offsets and bits
-*/
-#define PCISH5_ICR_CR 0x100 /* PCI control register values */
-#define CR_PBAM (1<<12)
-#define CR_PFCS (1<<11)
-#define CR_FTO (1<<10)
-#define CR_PFE (1<<9)
-#define CR_TBS (1<<8)
-#define CR_SPUE (1<<7)
-#define CR_BMAM (1<<6)
-#define CR_HOST (1<<5)
-#define CR_CLKEN (1<<4)
-#define CR_SOCS (1<<3)
-#define CR_IOCS (1<<2)
-#define CR_RSTCTL (1<<1)
-#define CR_CFINT (1<<0)
-#define CR_LOCK_MASK 0xa5000000
-
-#define PCISH5_ICR_INT 0x114 /* Interrupt registert values */
-#define INT_MADIM (1<<2)
-
-#define PCISH5_ICR_LSR0 0X104 /* Local space register values */
-#define PCISH5_ICR_LSR1 0X108 /* Local space register values */
-#define PCISH5_ICR_LAR0 0x10c /* Local address register values */
-#define PCISH5_ICR_LAR1 0x110 /* Local address register values */
-#define PCISH5_ICR_INTM 0x118 /* Interrupt mask register values */
-#define PCISH5_ICR_AIR 0x11c /* Interrupt error address information register values */
-#define PCISH5_ICR_CIR 0x120 /* Interrupt error command information register values */
-#define PCISH5_ICR_AINT 0x130 /* Interrupt error arbiter interrupt register values */
-#define PCISH5_ICR_AINTM 0x134 /* Interrupt error arbiter interrupt mask register values */
-#define PCISH5_ICR_BMIR 0x138 /* Interrupt error info register of bus master values */
-#define PCISH5_ICR_PAR 0x1c0 /* Pio address register values */
-#define PCISH5_ICR_MBR 0x1c4 /* Memory space bank register values */
-#define PCISH5_ICR_IOBR 0x1c8 /* I/O space bank register values */
-#define PCISH5_ICR_PINT 0x1cc /* power management interrupt register values */
-#define PCISH5_ICR_PINTM 0x1d0 /* power management interrupt mask register values */
-#define PCISH5_ICR_MBMR 0x1d8 /* memory space bank mask register values */
-#define PCISH5_ICR_IOBMR 0x1dc /* I/O space bank mask register values */
-#define PCISH5_ICR_CSCR0 0x210 /* PCI cache snoop control register 0 */
-#define PCISH5_ICR_CSCR1 0x214 /* PCI cache snoop control register 1 */
-#define PCISH5_ICR_PDR 0x220 /* Pio data register values */
-
-/* These are configs space registers */
-#define PCISH5_ICR_CSR_VID 0x000 /* Vendor id */
-#define PCISH5_ICR_CSR_DID 0x002 /* Device id */
-#define PCISH5_ICR_CSR_CMD 0x004 /* Command register */
-#define PCISH5_ICR_CSR_STATUS 0x006 /* Stautus */
-#define PCISH5_ICR_CSR_IBAR0 0x010 /* I/O base address register */
-#define PCISH5_ICR_CSR_MBAR0 0x014 /* First Memory base address register */
-#define PCISH5_ICR_CSR_MBAR1 0x018 /* Second Memory base address register */
-
-
-
-/* Base address of registers */
-#define SH5PCI_ICR_BASE (PHYS_PCI_BLOCK + 0x00040000)
-#define SH5PCI_IO_BASE (PHYS_PCI_BLOCK + 0x00800000)
-/* #define SH5PCI_VCR_BASE (P2SEG_PCICB_BLOCK + P2SEG) */
-
-/* Register selection macro */
-#define PCISH5_ICR_REG(x) ( pcicr_virt + (PCISH5_ICR_##x))
-/* #define PCISH5_VCR_REG(x) ( SH5PCI_VCR_BASE (PCISH5_VCR_##x)) */
-
-/* Write I/O functions */
-#define SH5PCI_WRITE(reg,val) ctrl_outl((u32)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_SHORT(reg,val) ctrl_outw((u16)(val),PCISH5_ICR_REG(reg))
-#define SH5PCI_WRITE_BYTE(reg,val) ctrl_outb((u8)(val),PCISH5_ICR_REG(reg))
-
-/* Read I/O functions */
-#define SH5PCI_READ(reg) ctrl_inl(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_SHORT(reg) ctrl_inw(PCISH5_ICR_REG(reg))
-#define SH5PCI_READ_BYTE(reg) ctrl_inb(PCISH5_ICR_REG(reg))
-
-/* Set PCI config bits */
-#define SET_CONFIG_BITS(bus,devfn,where) ((((bus) << 16) | ((devfn) << 8) | ((where) & ~3)) | 0x80000000)
-
-/* Set PCI command register */
-#define CONFIG_CMD(bus, devfn, where) SET_CONFIG_BITS(bus->number,devfn,where)
-
-/* Size converters */
-#define PCISH5_MEM_SIZCONV(x) (((x / 0x40000) - 1) << 18)
-#define PCISH5_IO_SIZCONV(x) (((x / 0x40000) - 1) << 18)
-
-
+++ /dev/null
-/*
- * $Id: pcibios.c,v 1.1 2001/08/24 12:38:19 dwmw2 Exp $
- *
- * arch/sh/kernel/pcibios.c
- *
- * Copyright (C) 2002 STMicroelectronics Limited
- * Author : David J. McKay
- *
- * Copyright (C) 2004 Richard Curnow, SuperH UK Limited
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- * This is GPL'd.
- *
- * Provided here are generic versions of:
- * pcibios_update_resource()
- * pcibios_align_resource()
- * pcibios_enable_device()
- * pcibios_set_master()
- * pcibios_update_irq()
- *
- * These functions are collected here to reduce duplication of common
- * code amongst the many platform-specific PCI support code files.
- *
- * Platform-specific files are expected to provide:
- * pcibios_fixup_bus()
- * pcibios_init()
- * pcibios_setup()
- * pcibios_fixup_pbus_ranges()
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-
-void
-pcibios_update_resource(struct pci_dev *dev, struct resource *root,
- struct resource *res, int resource)
-{
- u32 new, check;
- int reg;
-
- new = res->start | (res->flags & PCI_REGION_FLAG_MASK);
- if (resource < 6) {
- reg = PCI_BASE_ADDRESS_0 + 4*resource;
- } else if (resource == PCI_ROM_RESOURCE) {
- res->flags |= IORESOURCE_ROM_ENABLE;
- new |= PCI_ROM_ADDRESS_ENABLE;
- reg = dev->rom_base_reg;
- } else {
- /* Somebody might have asked allocation of a non-standard resource */
- return;
- }
-
- pci_write_config_dword(dev, reg, new);
- pci_read_config_dword(dev, reg, &check);
- if ((new ^ check) & ((new & PCI_BASE_ADDRESS_SPACE_IO) ? PCI_BASE_ADDRESS_IO_MASK : PCI_BASE_ADDRESS_MEM_MASK)) {
- printk(KERN_ERR "PCI: Error while updating region "
- "%s/%d (%08x != %08x)\n", pci_name(dev), resource,
- new, check);
- }
-}
-
-/*
- * We need to avoid collisions with `mirrored' VGA ports
- * and other strange ISA hardware, so we always want the
- * addresses to be allocated in the 0x000-0x0ff region
- * modulo 0x400.
- */
-void pcibios_align_resource(void *data, struct resource *res,
- resource_size_t size, resource_size_t align)
-{
- if (res->flags & IORESOURCE_IO) {
- resource_size_t start = res->start;
-
- if (start & 0x300) {
- start = (start + 0x3ff) & ~0x3ff;
- res->start = start;
- }
- }
-}
-
-static void pcibios_enable_bridge(struct pci_dev *dev)
-{
- struct pci_bus *bus = dev->subordinate;
- u16 cmd, old_cmd;
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
-
- if (bus->resource[0]->flags & IORESOURCE_IO) {
- cmd |= PCI_COMMAND_IO;
- }
- if ((bus->resource[1]->flags & IORESOURCE_MEM) ||
- (bus->resource[2]->flags & IORESOURCE_PREFETCH)) {
- cmd |= PCI_COMMAND_MEMORY;
- }
-
- if (cmd != old_cmd) {
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
-
- printk("PCI bridge %s, command register -> %04x\n",
- pci_name(dev), cmd);
-
-}
-
-
-
-int pcibios_enable_device(struct pci_dev *dev, int mask)
-{
- u16 cmd, old_cmd;
- int idx;
- struct resource *r;
-
- if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
- pcibios_enable_bridge(dev);
- }
-
- pci_read_config_word(dev, PCI_COMMAND, &cmd);
- old_cmd = cmd;
- for(idx=0; idx<6; idx++) {
- if (!(mask & (1 << idx)))
- continue;
- r = &dev->resource[idx];
- if (!r->start && r->end) {
- printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
- return -EINVAL;
- }
- if (r->flags & IORESOURCE_IO)
- cmd |= PCI_COMMAND_IO;
- if (r->flags & IORESOURCE_MEM)
- cmd |= PCI_COMMAND_MEMORY;
- }
- if (dev->resource[PCI_ROM_RESOURCE].start)
- cmd |= PCI_COMMAND_MEMORY;
- if (cmd != old_cmd) {
- printk(KERN_INFO "PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
- pci_write_config_word(dev, PCI_COMMAND, cmd);
- }
- return 0;
-}
-
-/*
- * If we set up a device for bus mastering, we need to check and set
- * the latency timer as it may not be properly set.
- */
-unsigned int pcibios_max_latency = 255;
-
-void pcibios_set_master(struct pci_dev *dev)
-{
- u8 lat;
- pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat);
- if (lat < 16)
- lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency;
- else if (lat > pcibios_max_latency)
- lat = pcibios_max_latency;
- else
- return;
- printk(KERN_INFO "PCI: Setting latency timer of device %s to %d\n", pci_name(dev), lat);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
-}
-
-void __init pcibios_update_irq(struct pci_dev *dev, int irq)
-{
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/setup.c
- *
- * sh64 Arch Support
- *
- * This file handles the architecture-dependent parts of initialization
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003, 2004 Paul Mundt
- *
- * benedict.gaster@superh.com: 2nd May 2002
- * Modified to use the empty_zero_page to pass command line arguments.
- *
- * benedict.gaster@superh.com: 3rd May 2002
- * Added support for ramdisk, removing statically linked romfs at the same time.
- *
- * lethal@linux-sh.org: 15th May 2003
- * Added generic procfs cpuinfo reporting. Make boards just export their name.
- *
- * lethal@linux-sh.org: 25th May 2003
- * Added generic get_cpu_subtype() for subtype reporting from cpu_data->type.
- *
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/screen_info.h>
-#include <linux/ioport.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/seq_file.h>
-#include <linux/blkdev.h>
-#include <linux/bootmem.h>
-#include <linux/console.h>
-#include <linux/root_dev.h>
-#include <linux/cpu.h>
-#include <linux/initrd.h>
-#include <linux/pfn.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/platform.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/sections.h>
-#include <asm/setup.h>
-#include <asm/smp.h>
-
-struct screen_info screen_info;
-
-#ifdef CONFIG_BLK_DEV_RAM
-extern int rd_doload; /* 1 = load ramdisk, 0 = don't load */
-extern int rd_prompt; /* 1 = prompt for ramdisk, 0 = don't prompt */
-extern int rd_image_start; /* starting block # of image */
-#endif
-
-extern int root_mountflags;
-extern char *get_system_type(void);
-extern void platform_setup(void);
-extern void platform_monitor(void);
-extern void platform_reserve(void);
-extern int sh64_cache_init(void);
-extern int sh64_tlb_init(void);
-
-#define RAMDISK_IMAGE_START_MASK 0x07FF
-#define RAMDISK_PROMPT_FLAG 0x8000
-#define RAMDISK_LOAD_FLAG 0x4000
-
-static char __initdata command_line[COMMAND_LINE_SIZE] = { 0, };
-unsigned long long memory_start = CONFIG_MEMORY_START;
-unsigned long long memory_end = CONFIG_MEMORY_START + (CONFIG_MEMORY_SIZE_IN_MB * 1024 * 1024);
-
-struct sh_cpuinfo boot_cpu_data;
-
-static inline void parse_mem_cmdline (char ** cmdline_p)
-{
- char c = ' ', *to = command_line, *from = COMMAND_LINE;
- int len = 0;
-
- /* Save unparsed command line copy for /proc/cmdline */
- memcpy(boot_command_line, COMMAND_LINE, COMMAND_LINE_SIZE);
- boot_command_line[COMMAND_LINE_SIZE-1] = '\0';
-
- for (;;) {
- /*
- * "mem=XXX[kKmM]" defines a size of memory.
- */
- if (c == ' ' && !memcmp(from, "mem=", 4)) {
- if (to != command_line)
- to--;
- {
- unsigned long mem_size;
-
- mem_size = memparse(from+4, &from);
- memory_end = memory_start + mem_size;
- }
- }
- c = *(from++);
- if (!c)
- break;
- if (COMMAND_LINE_SIZE <= ++len)
- break;
- *(to++) = c;
- }
- *to = '\0';
-
- *cmdline_p = command_line;
-}
-
-static void __init sh64_cpu_type_detect(void)
-{
- extern unsigned long long peek_real_address_q(unsigned long long addr);
- unsigned long long cir;
- /* Do peeks in real mode to avoid having to set up a mapping for the
- WPC registers. On SH5-101 cut2, such a mapping would be exposed to
- an address translation erratum which would make it hard to set up
- correctly. */
- cir = peek_real_address_q(0x0d000008);
-
- if ((cir & 0xffff) == 0x5103) {
- boot_cpu_data.type = CPU_SH5_103;
- } else if (((cir >> 32) & 0xffff) == 0x51e2) {
- /* CPU.VCR aliased at CIR address on SH5-101 */
- boot_cpu_data.type = CPU_SH5_101;
- } else {
- boot_cpu_data.type = CPU_SH_NONE;
- }
-}
-
-void __init setup_arch(char **cmdline_p)
-{
- unsigned long bootmap_size, i;
- unsigned long first_pfn, start_pfn, last_pfn, pages;
-
-#ifdef CONFIG_EARLY_PRINTK
- extern void enable_early_printk(void);
-
- /*
- * Setup Early SCIF console
- */
- enable_early_printk();
-#endif
-
- /*
- * Setup TLB mappings
- */
- sh64_tlb_init();
-
- /*
- * Caches are already initialized by the time we get here, so we just
- * fill in cpu_data info for the caches.
- */
- sh64_cache_init();
-
- platform_setup();
- platform_monitor();
-
- sh64_cpu_type_detect();
-
- ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
-
-#ifdef CONFIG_BLK_DEV_RAM
- rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
- rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
- rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0);
-#endif
-
- if (!MOUNT_ROOT_RDONLY)
- root_mountflags &= ~MS_RDONLY;
- init_mm.start_code = (unsigned long) _text;
- init_mm.end_code = (unsigned long) _etext;
- init_mm.end_data = (unsigned long) _edata;
- init_mm.brk = (unsigned long) _end;
-
- code_resource.start = __pa(_text);
- code_resource.end = __pa(_etext)-1;
- data_resource.start = __pa(_etext);
- data_resource.end = __pa(_edata)-1;
-
- parse_mem_cmdline(cmdline_p);
-
- /*
- * Find the lowest and highest page frame numbers we have available
- */
- first_pfn = PFN_DOWN(memory_start);
- last_pfn = PFN_DOWN(memory_end);
- pages = last_pfn - first_pfn;
-
- /*
- * Partially used pages are not usable - thus
- * we are rounding upwards:
- */
- start_pfn = PFN_UP(__pa(_end));
-
- /*
- * Find a proper area for the bootmem bitmap. After this
- * bootstrap step all allocations (until the page allocator
- * is intact) must be done via bootmem_alloc().
- */
- bootmap_size = init_bootmem_node(NODE_DATA(0), start_pfn,
- first_pfn,
- last_pfn);
- /*
- * Round it up.
- */
- bootmap_size = PFN_PHYS(PFN_UP(bootmap_size));
-
- /*
- * Register fully available RAM pages with the bootmem allocator.
- */
- free_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn), PFN_PHYS(pages));
-
- /*
- * Reserve all kernel sections + bootmem bitmap + a guard page.
- */
- reserve_bootmem_node(NODE_DATA(0), PFN_PHYS(first_pfn),
- (PFN_PHYS(start_pfn) + bootmap_size + PAGE_SIZE) - PFN_PHYS(first_pfn));
-
- /*
- * Reserve platform dependent sections
- */
- platform_reserve();
-
-#ifdef CONFIG_BLK_DEV_INITRD
- if (LOADER_TYPE && INITRD_START) {
- if (INITRD_START + INITRD_SIZE <= (PFN_PHYS(last_pfn))) {
- reserve_bootmem_node(NODE_DATA(0), INITRD_START + __MEMORY_START, INITRD_SIZE);
-
- initrd_start = (long) INITRD_START + PAGE_OFFSET + __MEMORY_START;
- initrd_end = initrd_start + INITRD_SIZE;
- } else {
- printk("initrd extends beyond end of memory "
- "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
- (long) INITRD_START + INITRD_SIZE,
- PFN_PHYS(last_pfn));
- initrd_start = 0;
- }
- }
-#endif
-
- /*
- * Claim all RAM, ROM, and I/O resources.
- */
-
- /* Kernel RAM */
- request_resource(&iomem_resource, &code_resource);
- request_resource(&iomem_resource, &data_resource);
-
- /* Other KRAM space */
- for (i = 0; i < STANDARD_KRAM_RESOURCES - 2; i++)
- request_resource(&iomem_resource,
- &platform_parms.kram_res_p[i]);
-
- /* XRAM space */
- for (i = 0; i < STANDARD_XRAM_RESOURCES; i++)
- request_resource(&iomem_resource,
- &platform_parms.xram_res_p[i]);
-
- /* ROM space */
- for (i = 0; i < STANDARD_ROM_RESOURCES; i++)
- request_resource(&iomem_resource,
- &platform_parms.rom_res_p[i]);
-
- /* I/O space */
- for (i = 0; i < STANDARD_IO_RESOURCES; i++)
- request_resource(&ioport_resource,
- &platform_parms.io_res_p[i]);
-
-
-#ifdef CONFIG_VT
-#if defined(CONFIG_VGA_CONSOLE)
- conswitchp = &vga_con;
-#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
-#endif
-#endif
-
- printk("Hardware FPU: %s\n", fpu_in_use ? "enabled" : "disabled");
-
- paging_init();
-}
-
-void __xchg_called_with_bad_pointer(void)
-{
- printk(KERN_EMERG "xchg() called with bad pointer !\n");
-}
-
-static struct cpu cpu[1];
-
-static int __init topology_init(void)
-{
- return register_cpu(cpu, 0);
-}
-
-subsys_initcall(topology_init);
-
-/*
- * Get CPU information
- */
-static const char *cpu_name[] = {
- [CPU_SH5_101] = "SH5-101",
- [CPU_SH5_103] = "SH5-103",
- [CPU_SH_NONE] = "Unknown",
-};
-
-const char *get_cpu_subtype(void)
-{
- return cpu_name[boot_cpu_data.type];
-}
-
-#ifdef CONFIG_PROC_FS
-static int show_cpuinfo(struct seq_file *m,void *v)
-{
- unsigned int cpu = smp_processor_id();
-
- if (!cpu)
- seq_printf(m, "machine\t\t: %s\n", get_system_type());
-
- seq_printf(m, "processor\t: %d\n", cpu);
- seq_printf(m, "cpu family\t: SH-5\n");
- seq_printf(m, "cpu type\t: %s\n", get_cpu_subtype());
-
- seq_printf(m, "icache size\t: %dK-bytes\n",
- (boot_cpu_data.icache.ways *
- boot_cpu_data.icache.sets *
- boot_cpu_data.icache.linesz) >> 10);
- seq_printf(m, "dcache size\t: %dK-bytes\n",
- (boot_cpu_data.dcache.ways *
- boot_cpu_data.dcache.sets *
- boot_cpu_data.dcache.linesz) >> 10);
- seq_printf(m, "itlb entries\t: %d\n", boot_cpu_data.itlb.entries);
- seq_printf(m, "dtlb entries\t: %d\n", boot_cpu_data.dtlb.entries);
-
-#define PRINT_CLOCK(name, value) \
- seq_printf(m, name " clock\t: %d.%02dMHz\n", \
- ((value) / 1000000), ((value) % 1000000)/10000)
-
- PRINT_CLOCK("cpu", boot_cpu_data.cpu_clock);
- PRINT_CLOCK("bus", boot_cpu_data.bus_clock);
- PRINT_CLOCK("module", boot_cpu_data.module_clock);
-
- seq_printf(m, "bogomips\t: %lu.%02lu\n\n",
- (loops_per_jiffy*HZ+2500)/500000,
- ((loops_per_jiffy*HZ+2500)/5000) % 100);
-
- return 0;
-}
-
-static void *c_start(struct seq_file *m, loff_t *pos)
-{
- return (void*)(*pos == 0);
-}
-static void *c_next(struct seq_file *m, void *v, loff_t *pos)
-{
- return NULL;
-}
-static void c_stop(struct seq_file *m, void *v)
-{
-}
-struct seq_operations cpuinfo_op = {
- .start = c_start,
- .next = c_next,
- .stop = c_stop,
- .show = show_cpuinfo,
-};
-#endif /* CONFIG_PROC_FS */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * arch/sh64/kernel/time.c
- *
- * Copyright (C) 2000, 2001 Paolo Alberelli
- * Copyright (C) 2003 - 2007 Paul Mundt
- * Copyright (C) 2003 Richard Curnow
- *
- * Original TMU/RTC code taken from sh version.
- * Copyright (C) 1999 Tetsuya Okada & Niibe Yutaka
- * Some code taken from i386 version.
- * Copyright (C) 1991, 1992, 1995 Linus Torvalds
- */
-#include <linux/errno.h>
-#include <linux/rwsem.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/profile.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <linux/bcd.h>
-#include <linux/timex.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <asm/registers.h> /* required by inline __asm__ stmt. */
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/delay.h>
-#include <asm/hardware.h>
-
-#define TMU_TOCR_INIT 0x00
-#define TMU0_TCR_INIT 0x0020
-#define TMU_TSTR_INIT 1
-#define TMU_TSTR_OFF 0
-
-/* Real Time Clock */
-#define RTC_BLOCK_OFF 0x01040000
-#define RTC_BASE PHYS_PERIPHERAL_BLOCK + RTC_BLOCK_OFF
-#define RTC_RCR1_CIE 0x10 /* Carry Interrupt Enable */
-#define RTC_RCR1 (rtc_base + 0x38)
-
-/* Clock, Power and Reset Controller */
-#define CPRC_BLOCK_OFF 0x01010000
-#define CPRC_BASE PHYS_PERIPHERAL_BLOCK + CPRC_BLOCK_OFF
-
-#define FRQCR (cprc_base+0x0)
-#define WTCSR (cprc_base+0x0018)
-#define STBCR (cprc_base+0x0030)
-
-/* Time Management Unit */
-#define TMU_BLOCK_OFF 0x01020000
-#define TMU_BASE PHYS_PERIPHERAL_BLOCK + TMU_BLOCK_OFF
-#define TMU0_BASE tmu_base + 0x8 + (0xc * 0x0)
-#define TMU1_BASE tmu_base + 0x8 + (0xc * 0x1)
-#define TMU2_BASE tmu_base + 0x8 + (0xc * 0x2)
-
-#define TMU_TOCR tmu_base+0x0 /* Byte access */
-#define TMU_TSTR tmu_base+0x4 /* Byte access */
-
-#define TMU0_TCOR TMU0_BASE+0x0 /* Long access */
-#define TMU0_TCNT TMU0_BASE+0x4 /* Long access */
-#define TMU0_TCR TMU0_BASE+0x8 /* Word access */
-
-#define TICK_SIZE (tick_nsec / 1000)
-
-static unsigned long tmu_base, rtc_base;
-unsigned long cprc_base;
-
-/* Variables to allow interpolation of time of day to resolution better than a
- * jiffy. */
-
-/* This is effectively protected by xtime_lock */
-static unsigned long ctc_last_interrupt;
-static unsigned long long usecs_per_jiffy = 1000000/HZ; /* Approximation */
-
-#define CTC_JIFFY_SCALE_SHIFT 40
-
-/* 2**CTC_JIFFY_SCALE_SHIFT / ctc_ticks_per_jiffy */
-static unsigned long long scaled_recip_ctc_ticks_per_jiffy;
-
-/* Estimate number of microseconds that have elapsed since the last timer tick,
- by scaling the delta that has occurred in the CTC register.
-
- WARNING WARNING WARNING : This algorithm relies on the CTC decrementing at
- the CPU clock rate. If the CPU sleeps, the CTC stops counting. Bear this
- in mind if enabling SLEEP_WORKS in process.c. In that case, this algorithm
- probably needs to use TMU.TCNT0 instead. This will work even if the CPU is
- sleeping, though will be coarser.
-
- FIXME : What if usecs_per_tick is moving around too much, e.g. if an adjtime
- is running or if the freq or tick arguments of adjtimex are modified after
- we have calibrated the scaling factor? This will result in either a jump at
- the end of a tick period, or a wrap backwards at the start of the next one,
- if the application is reading the time of day often enough. I think we
- ought to do better than this. For this reason, usecs_per_jiffy is left
- separated out in the calculation below. This allows some future hook into
- the adjtime-related stuff in kernel/timer.c to remove this hazard.
-
-*/
-
-static unsigned long usecs_since_tick(void)
-{
- unsigned long long current_ctc;
- long ctc_ticks_since_interrupt;
- unsigned long long ull_ctc_ticks_since_interrupt;
- unsigned long result;
-
- unsigned long long mul1_out;
- unsigned long long mul1_out_high;
- unsigned long long mul2_out_low, mul2_out_high;
-
- /* Read CTC register */
- asm ("getcon cr62, %0" : "=r" (current_ctc));
- /* Note, the CTC counts down on each CPU clock, not up.
- Note(2), use long type to get correct wraparound arithmetic when
- the counter crosses zero. */
- ctc_ticks_since_interrupt = (long) ctc_last_interrupt - (long) current_ctc;
- ull_ctc_ticks_since_interrupt = (unsigned long long) ctc_ticks_since_interrupt;
-
- /* Inline assembly to do 32x32x32->64 multiplier */
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul1_out) :
- "r" (ull_ctc_ticks_since_interrupt), "r" (usecs_per_jiffy));
-
- mul1_out_high = mul1_out >> 32;
-
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul2_out_low) :
- "r" (mul1_out), "r" (scaled_recip_ctc_ticks_per_jiffy));
-
-#if 1
- asm volatile ("mulu.l %1, %2, %0" :
- "=r" (mul2_out_high) :
- "r" (mul1_out_high), "r" (scaled_recip_ctc_ticks_per_jiffy));
-#endif
-
- result = (unsigned long) (((mul2_out_high << 32) + mul2_out_low) >> CTC_JIFFY_SCALE_SHIFT);
-
- return result;
-}
-
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = usecs_since_tick();
- sec = xtime.tv_sec;
- usec += xtime.tv_nsec / 1000;
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-int do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- write_seqlock_irq(&xtime_lock);
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * usecs_since_tick();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
-
- return 0;
-}
-EXPORT_SYMBOL(do_settimeofday);
-
-/* Dummy RTC ops */
-static void null_rtc_get_time(struct timespec *tv)
-{
- tv->tv_sec = mktime(2000, 1, 1, 0, 0, 0);
- tv->tv_nsec = 0;
-}
-
-static int null_rtc_set_time(const time_t secs)
-{
- return 0;
-}
-
-void (*rtc_sh_get_time)(struct timespec *) = null_rtc_get_time;
-int (*rtc_sh_set_time)(const time_t) = null_rtc_set_time;
-
-/* last time the RTC clock got updated */
-static long last_rtc_update;
-
-/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
- */
-static inline void do_timer_interrupt(void)
-{
- unsigned long long current_ctc;
- asm ("getcon cr62, %0" : "=r" (current_ctc));
- ctc_last_interrupt = (unsigned long) current_ctc;
-
- do_timer(1);
-#ifndef CONFIG_SMP
- update_process_times(user_mode(get_irq_regs()));
-#endif
- if (current->pid)
- profile_tick(CPU_PROFILING);
-
-#ifdef CONFIG_HEARTBEAT
- {
- extern void heartbeat(void);
-
- heartbeat();
- }
-#endif
-
- /*
- * If we have an externally synchronized Linux clock, then update
- * RTC clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
- * called as close as possible to 500 ms before the new second starts.
- */
- if (ntp_synced() &&
- xtime.tv_sec > last_rtc_update + 660 &&
- (xtime.tv_nsec / 1000) >= 500000 - ((unsigned) TICK_SIZE) / 2 &&
- (xtime.tv_nsec / 1000) <= 500000 + ((unsigned) TICK_SIZE) / 2) {
- if (rtc_sh_set_time(xtime.tv_sec) == 0)
- last_rtc_update = xtime.tv_sec;
- else
- /* do it again in 60 s */
- last_rtc_update = xtime.tv_sec - 600;
- }
-}
-
-/*
- * This is the same as the above, except we _also_ save the current
- * Time Stamp Counter value at the time of the timer interrupt, so that
- * we later on can estimate the time of day more exactly.
- */
-static irqreturn_t timer_interrupt(int irq, void *dev_id)
-{
- unsigned long timer_status;
-
- /* Clear UNF bit */
- timer_status = ctrl_inw(TMU0_TCR);
- timer_status &= ~0x100;
- ctrl_outw(timer_status, TMU0_TCR);
-
- /*
- * Here we are in the timer irq handler. We just have irqs locally
- * disabled but we don't know if the timer_bh is running on the other
- * CPU. We need to avoid to SMP race with it. NOTE: we don' t need
- * the irq version of write_lock because as just said we have irq
- * locally disabled. -arca
- */
- write_lock(&xtime_lock);
- do_timer_interrupt();
- write_unlock(&xtime_lock);
-
- return IRQ_HANDLED;
-}
-
-
-static __init unsigned int get_cpu_hz(void)
-{
- unsigned int count;
- unsigned long __dummy;
- unsigned long ctc_val_init, ctc_val;
-
- /*
- ** Regardless the toolchain, force the compiler to use the
- ** arbitrary register r3 as a clock tick counter.
- ** NOTE: r3 must be in accordance with sh64_rtc_interrupt()
- */
- register unsigned long long __rtc_irq_flag __asm__ ("r3");
-
- local_irq_enable();
- do {} while (ctrl_inb(rtc_base) != 0);
- ctrl_outb(RTC_RCR1_CIE, RTC_RCR1); /* Enable carry interrupt */
-
- /*
- * r3 is arbitrary. CDC does not support "=z".
- */
- ctc_val_init = 0xffffffff;
- ctc_val = ctc_val_init;
-
- asm volatile("gettr tr0, %1\n\t"
- "putcon %0, " __CTC "\n\t"
- "and %2, r63, %2\n\t"
- "pta $+4, tr0\n\t"
- "beq/l %2, r63, tr0\n\t"
- "ptabs %1, tr0\n\t"
- "getcon " __CTC ", %0\n\t"
- : "=r"(ctc_val), "=r" (__dummy), "=r" (__rtc_irq_flag)
- : "0" (0));
- local_irq_disable();
- /*
- * SH-3:
- * CPU clock = 4 stages * loop
- * tst rm,rm if id ex
- * bt/s 1b if id ex
- * add #1,rd if id ex
- * (if) pipe line stole
- * tst rm,rm if id ex
- * ....
- *
- *
- * SH-4:
- * CPU clock = 6 stages * loop
- * I don't know why.
- * ....
- *
- * SH-5:
- * Use CTC register to count. This approach returns the right value
- * even if the I-cache is disabled (e.g. whilst debugging.)
- *
- */
-
- count = ctc_val_init - ctc_val; /* CTC counts down */
-
-#if defined (CONFIG_SH_SIMULATOR)
- /*
- * Let's pretend we are a 5MHz SH-5 to avoid a too
- * little timer interval. Also to keep delay
- * calibration within a reasonable time.
- */
- return 5000000;
-#else
- /*
- * This really is count by the number of clock cycles
- * by the ratio between a complete R64CNT
- * wrap-around (128) and CUI interrupt being raised (64).
- */
- return count*2;
-#endif
-}
-
-static irqreturn_t sh64_rtc_interrupt(int irq, void *dev_id)
-{
- struct pt_regs *regs = get_irq_regs();
-
- ctrl_outb(0, RTC_RCR1); /* Disable Carry Interrupts */
- regs->regs[3] = 1; /* Using r3 */
-
- return IRQ_HANDLED;
-}
-
-static struct irqaction irq0 = {
- .handler = timer_interrupt,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "timer",
-};
-static struct irqaction irq1 = {
- .handler = sh64_rtc_interrupt,
- .flags = IRQF_DISABLED,
- .mask = CPU_MASK_NONE,
- .name = "rtc",
-};
-
-void __init time_init(void)
-{
- unsigned int cpu_clock, master_clock, bus_clock, module_clock;
- unsigned long interval;
- unsigned long frqcr, ifc, pfc;
- static int ifc_table[] = { 2, 4, 6, 8, 10, 12, 16, 24 };
-#define bfc_table ifc_table /* Same */
-#define pfc_table ifc_table /* Same */
-
- tmu_base = onchip_remap(TMU_BASE, 1024, "TMU");
- if (!tmu_base) {
- panic("Unable to remap TMU\n");
- }
-
- rtc_base = onchip_remap(RTC_BASE, 1024, "RTC");
- if (!rtc_base) {
- panic("Unable to remap RTC\n");
- }
-
- cprc_base = onchip_remap(CPRC_BASE, 1024, "CPRC");
- if (!cprc_base) {
- panic("Unable to remap CPRC\n");
- }
-
- rtc_sh_get_time(&xtime);
-
- setup_irq(TIMER_IRQ, &irq0);
- setup_irq(RTC_IRQ, &irq1);
-
- /* Check how fast it is.. */
- cpu_clock = get_cpu_hz();
-
- /* Note careful order of operations to maintain reasonable precision and avoid overflow. */
- scaled_recip_ctc_ticks_per_jiffy = ((1ULL << CTC_JIFFY_SCALE_SHIFT) / (unsigned long long)(cpu_clock / HZ));
-
- free_irq(RTC_IRQ, NULL);
-
- printk("CPU clock: %d.%02dMHz\n",
- (cpu_clock / 1000000), (cpu_clock % 1000000)/10000);
- {
- unsigned short bfc;
- frqcr = ctrl_inl(FRQCR);
- ifc = ifc_table[(frqcr>> 6) & 0x0007];
- bfc = bfc_table[(frqcr>> 3) & 0x0007];
- pfc = pfc_table[(frqcr>> 12) & 0x0007];
- master_clock = cpu_clock * ifc;
- bus_clock = master_clock/bfc;
- }
-
- printk("Bus clock: %d.%02dMHz\n",
- (bus_clock/1000000), (bus_clock % 1000000)/10000);
- module_clock = master_clock/pfc;
- printk("Module clock: %d.%02dMHz\n",
- (module_clock/1000000), (module_clock % 1000000)/10000);
- interval = (module_clock/(HZ*4));
-
- printk("Interval = %ld\n", interval);
-
- current_cpu_data.cpu_clock = cpu_clock;
- current_cpu_data.master_clock = master_clock;
- current_cpu_data.bus_clock = bus_clock;
- current_cpu_data.module_clock = module_clock;
-
- /* Start TMU0 */
- ctrl_outb(TMU_TSTR_OFF, TMU_TSTR);
- ctrl_outb(TMU_TOCR_INIT, TMU_TOCR);
- ctrl_outw(TMU0_TCR_INIT, TMU0_TCR);
- ctrl_outl(interval, TMU0_TCOR);
- ctrl_outl(interval, TMU0_TCNT);
- ctrl_outb(TMU_TSTR_INIT, TMU_TSTR);
-}
-
-void enter_deep_standby(void)
-{
- /* Disable watchdog timer */
- ctrl_outl(0xa5000000, WTCSR);
- /* Configure deep standby on sleep */
- ctrl_outl(0x03, STBCR);
-
-#ifdef CONFIG_SH_ALPHANUMERIC
- {
- extern void mach_alphanum(int position, unsigned char value);
- extern void mach_alphanum_brightness(int setting);
- char halted[] = "Halted. ";
- int i;
- mach_alphanum_brightness(6); /* dimmest setting above off */
- for (i=0; i<8; i++) {
- mach_alphanum(i, halted[i]);
- }
- asm __volatile__ ("synco");
- }
-#endif
-
- asm __volatile__ ("sleep");
- asm __volatile__ ("synci");
- asm __volatile__ ("nop");
- asm __volatile__ ("nop");
- asm __volatile__ ("nop");
- asm __volatile__ ("nop");
- panic("Unexpected wakeup!\n");
-}
-
-static struct resource rtc_resources[] = {
- [0] = {
- /* RTC base, filled in by rtc_init */
- .flags = IORESOURCE_IO,
- },
- [1] = {
- /* Period IRQ */
- .start = IRQ_PRI,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* Carry IRQ */
- .start = IRQ_CUI,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- /* Alarm IRQ */
- .start = IRQ_ATI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device rtc_device = {
- .name = "sh-rtc",
- .id = -1,
- .num_resources = ARRAY_SIZE(rtc_resources),
- .resource = rtc_resources,
-};
-
-static int __init rtc_init(void)
-{
- rtc_resources[0].start = rtc_base;
- rtc_resources[0].end = rtc_resources[0].start + 0x58 - 1;
-
- return platform_device_register(&rtc_device);
-}
-device_initcall(rtc_init);
projects / linux-2.6-block.git / commitdiff