serial: tegra: Remove redundant code and check in tegra_uart_stop_rx()
authorJon Hunter <jonathanh@nvidia.com>
Fri, 9 Oct 2015 13:50:01 +0000 (14:50 +0100)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Sun, 18 Oct 2015 04:07:57 +0000 (21:07 -0700)
The serial-tegra driver always uses DMA and hence the driver always
allocates DMA channels. Therefore, the test to see if the RX DMA channel
is initialised in tegra_uart_stop_rx() is unnecessary and so remove
the test and the code that corresponds to the case where the RX DMA
channel is not initialised. Please note that the call to
tegra_uart_stop_rx() should always be before the call to
tegra_uart_shutdown() which will uninitialise the RX DMA channel.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/serial-tegra.c

index 42583484d4b28461346d7ab8be907e8c506ed88e..11aa5e1e37059b797d490a30b7734cb3845eab3f 100644 (file)
@@ -777,16 +777,13 @@ static void tegra_uart_stop_rx(struct uart_port *u)
        tup->ier_shadow = ier;
        tegra_uart_write(tup, ier, UART_IER);
        tup->rx_in_progress = 0;
-       if (tup->rx_dma_chan) {
-               dmaengine_terminate_all(tup->rx_dma_chan);
-               dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
-               async_tx_ack(tup->rx_dma_desc);
-               count = tup->rx_bytes_requested - state.residue;
-               tegra_uart_copy_rx_to_tty(tup, port, count);
-               tegra_uart_handle_rx_pio(tup, port);
-       } else {
-               tegra_uart_handle_rx_pio(tup, port);
-       }
+       dmaengine_terminate_all(tup->rx_dma_chan);
+       dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+       async_tx_ack(tup->rx_dma_desc);
+       count = tup->rx_bytes_requested - state.residue;
+       tegra_uart_copy_rx_to_tty(tup, port, count);
+       tegra_uart_handle_rx_pio(tup, port);
+
        if (tty) {
                tty_flip_buffer_push(port);
                tty_kref_put(tty);