ixgbe: Restore ESDP settings after MAC reset
authorDon Skidmore <donald.c.skidmore@intel.com>
Tue, 9 Jun 2015 23:18:56 +0000 (16:18 -0700)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Wed, 10 Jun 2015 00:21:17 +0000 (17:21 -0700)
The I2C mux control relies on the SDP setting in the ESDP register
so it is necessary to restore the value after a MAC reset.  Combine
all this functionality in to a support function.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c

index f78cac8b0235776bdc70f071bd6e140d2109a8ac..a1d8ab00aa966e06236b7c66a76ef6c3b476bf52 100644 (file)
 #include "ixgbe_common.h"
 #include "ixgbe_phy.h"
 
+/** ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw)
+{
+       u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
+
+       if (hw->bus.lan_id) {
+               esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
+               esdp |= IXGBE_ESDP_SDP1_DIR;
+       }
+       esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
+       IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+       IXGBE_WRITE_FLUSH(hw);
+}
+
 /** ixgbe_identify_phy_x550em - Get PHY type based on device id
  *  @hw: pointer to hardware structure
  *
  */
 static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw)
 {
-       u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
-
        switch (hw->device_id) {
        case IXGBE_DEV_ID_X550EM_X_SFP:
                /* set up for CS4227 usage */
                hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
-               if (hw->bus.lan_id) {
-                       esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
-                       esdp |= IXGBE_ESDP_SDP1_DIR;
-               }
-               esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
-               IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+               ixgbe_setup_mux_ctl(hw);
 
                return ixgbe_identify_module_generic(hw);
        case IXGBE_DEV_ID_X550EM_X_KX4:
@@ -1127,18 +1136,10 @@ static s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
 {
        struct ixgbe_phy_info *phy = &hw->phy;
        s32 ret_val;
-       u32 esdp;
 
        if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) {
-               esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM;
-
-               if (hw->bus.lan_id) {
-                       esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1);
-                       esdp |= IXGBE_ESDP_SDP1_DIR;
-               }
-               esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR);
-               IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
+               ixgbe_setup_mux_ctl(hw);
        }
 
        /* Identify the PHY or SFP module */
@@ -1366,6 +1367,9 @@ mac_reset_top:
        hw->mac.num_rar_entries = 128;
        hw->mac.ops.init_rx_addrs(hw);
 
+       if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP)
+               ixgbe_setup_mux_ctl(hw);
+
        return status;
 }