Blackfin Serial Driver: Fix bug - request UART2/3 peripheral mapped interrupts in...
authorSonic Zhang <sonic.zhang@analog.com>
Mon, 13 Oct 2008 09:33:51 +0000 (10:33 +0100)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 13 Oct 2008 16:51:38 +0000 (09:51 -0700)
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
arch/blackfin/kernel/bfin_dma_5xx.c
drivers/serial/bfin_5xx.c

index 93229b3d6e3e30da6bc17dd760bd48ddbacda0af..339293d677cc33608970e912476dad1040ab7ade 100644 (file)
@@ -117,15 +117,14 @@ int request_dma(unsigned int channel, char *device_id)
 
 #ifdef CONFIG_BF54x
        if (channel >= CH_UART2_RX && channel <= CH_UART3_TX) {
-               if (strncmp(device_id, "BFIN_UART", 9) == 0) {
-                       dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-                       dma_ch[channel].regs->peripheral_map |=
+               unsigned int per_map;
+               per_map = dma_ch[channel].regs->peripheral_map & 0xFFF;
+               if (strncmp(device_id, "BFIN_UART", 9) == 0)
+                       dma_ch[channel].regs->peripheral_map = per_map |
                                ((channel - CH_UART2_RX + 0xC)<<12);
-               } else {
-                       dma_ch[channel].regs->peripheral_map &= 0x0FFF;
-                       dma_ch[channel].regs->peripheral_map |=
+               else
+                       dma_ch[channel].regs->peripheral_map = per_map |
                                ((channel - CH_UART2_RX + 0x6)<<12);
-               }
        }
 #endif
 
index a5cf0e70b3f6bcbeafe851385fdfc816adf3b491..569f0e2476c690259e6234911db7c33c4998c4b9 100644 (file)
@@ -649,6 +649,42 @@ static int bfin_serial_startup(struct uart_port *port)
                free_irq(uart->port.irq, uart);
                return -EBUSY;
        }
+
+# ifdef CONFIG_BF54x
+       {
+               unsigned uart_dma_ch_rx, uart_dma_ch_tx;
+
+               switch (uart->port.irq) {
+               case IRQ_UART3_RX:
+                       uart_dma_ch_rx = CH_UART3_RX;
+                       uart_dma_ch_tx = CH_UART3_TX;
+                       break;
+               case IRQ_UART2_RX:
+                       uart_dma_ch_rx = CH_UART2_RX;
+                       uart_dma_ch_tx = CH_UART2_TX;
+                       break;
+               default:
+                       uart_dma_ch_rx = uart_dma_ch_tx = 0;
+                       break;
+               };
+
+               if (uart_dma_ch_rx &&
+                       request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) {
+                       printk(KERN_NOTICE"Fail to attach UART interrupt\n");
+                       free_irq(uart->port.irq, uart);
+                       free_irq(uart->port.irq + 1, uart);
+                       return -EBUSY;
+               }
+               if (uart_dma_ch_tx &&
+                       request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) {
+                       printk(KERN_NOTICE "Fail to attach UART interrupt\n");
+                       free_dma(uart_dma_ch_rx);
+                       free_irq(uart->port.irq, uart);
+                       free_irq(uart->port.irq + 1, uart);
+                       return -EBUSY;
+               }
+       }
+# endif
 #endif
        UART_SET_IER(uart, ERBFI);
        return 0;
@@ -666,6 +702,20 @@ static void bfin_serial_shutdown(struct uart_port *port)
        del_timer(&(uart->rx_dma_timer));
        dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0);
 #else
+#ifdef CONFIG_BF54x
+       switch (uart->port.irq) {
+       case IRQ_UART3_RX:
+               free_dma(CH_UART3_RX);
+               free_dma(CH_UART3_TX);
+               break;
+       case IRQ_UART2_RX:
+               free_dma(CH_UART2_RX);
+               free_dma(CH_UART2_TX);
+               break;
+       default:
+               break;
+       };
+#endif
 #ifdef CONFIG_KGDB_UART
        if (uart->port.line != CONFIG_KGDB_UART_PORT)
 #endif