[PATCH] v4l: 716: support for em28xx board family
authorakpm@osdl.org <akpm@osdl.org>
Wed, 9 Nov 2005 05:37:07 +0000 (21:37 -0800)
committerLinus Torvalds <torvalds@g5.osdl.org>
Wed, 9 Nov 2005 15:56:15 +0000 (07:56 -0800)
- Added support for em28xx board family

Signed-off-by: Ludovico Cavedon <cavedon@sssup.it>
Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
drivers/media/video/em28xx/em28xx-cards.c [new file with mode: 0644]
drivers/media/video/em28xx/em28xx-core.c [new file with mode: 0644]
drivers/media/video/em28xx/em28xx-i2c.c [new file with mode: 0644]
drivers/media/video/em28xx/em28xx-video.c [new file with mode: 0644]
drivers/media/video/em28xx/em28xx.h [new file with mode: 0644]
drivers/media/video/tvp5150.c

diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
new file mode 100644 (file)
index 0000000..b6d89de
--- /dev/null
@@ -0,0 +1,168 @@
+/*
+   em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
+                      Ludovico Cavedon <cavedon@sssup.it>
+                      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+   Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/usb.h>
+#include <media/tuner.h>
+#include "audiochip.h"
+#include "tveeprom.h"
+#include "msp3400.h"
+
+#include "em2820.h"
+
+enum em2820_board_entry {
+       EM2820_BOARD_TERRATEC_CINERGY_250,
+       EM2820_BOARD_PINNACLE_USB_2,
+       EM2820_BOARD_HAUPPAUGE_WINTV_USB_2,
+       EM2820_BOARD_MSI_VOX_USB_2
+};
+
+struct em2820_board em2820_boards[] = {
+       [EM2820_BOARD_TERRATEC_CINERGY_250] = {
+               .name         = "Terratec Cinergy 250 USB",
+               .vchannels    = 3,
+               .norm         = VIDEO_MODE_PAL,
+               .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+               .tda9887_conf = TDA9887_PRESENT,
+               .has_tuner    = 1,
+               .decoder      = EM2820_SAA7113,
+               .input          = {{
+                       .type     = EM2820_VMUX_TELEVISION,
+                       .vmux     = 2,
+                       .amux     = 0,
+               },{
+                       .type     = EM2820_VMUX_COMPOSITE1,
+                       .vmux     = 0,
+                       .amux     = 1,
+               },{
+                       .type     = EM2820_VMUX_SVIDEO,
+                       .vmux     = 9,
+                       .amux     = 1,
+               }},
+       },
+       [EM2820_BOARD_PINNACLE_USB_2] = {
+               .name         = "Pinnacle PCTV USB 2",
+               .vchannels    = 3,
+               .norm         = VIDEO_MODE_PAL,
+               .tuner_type   = TUNER_LG_PAL_NEW_TAPC,
+               .tda9887_conf = TDA9887_PRESENT,
+               .has_tuner    = 1,
+               .decoder      = EM2820_SAA7113,
+               .input          = {{
+                       .type     = EM2820_VMUX_TELEVISION,
+                       .vmux     = 2,
+                       .amux     = 0,
+               },{
+                       .type     = EM2820_VMUX_COMPOSITE1,
+                       .vmux     = 0,
+                       .amux     = 1,
+               },{
+                       .type     = EM2820_VMUX_SVIDEO,
+                       .vmux     = 9,
+                       .amux     = 1,
+               }},
+       },
+       [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = {
+               .name         = "Hauppauge WinTV USB 2",
+               .vchannels    = 3,
+               .norm         = VIDEO_MODE_NTSC,
+               .tuner_type   = TUNER_PHILIPS_FM1236_MK3,
+               .tda9887_conf = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE,
+               .has_tuner    = 1,
+               .decoder      = EM2820_TVP5150,
+               .has_msp34xx  = 1,
+               /*FIXME: S-Video not tested */
+               .input          = {{
+                       .type     = EM2820_VMUX_TELEVISION,
+                       .vmux     = 0,
+                       .amux     = 0,
+               },{
+                       .type     = EM2820_VMUX_SVIDEO,
+                       .vmux     = 2,
+                       .amux     = 1,
+               }},
+       },
+       [EM2820_BOARD_MSI_VOX_USB_2] = {
+               .name           = "MSI VOX USB 2.0",
+               .vchannels      = 3,
+               .norm           = VIDEO_MODE_PAL,
+               .tuner_type     = TUNER_PHILIPS_PAL,
+               .tda9887_conf   = TDA9887_PRESENT|TDA9887_PORT1_ACTIVE|TDA9887_PORT2_ACTIVE,
+               .has_tuner      = 1,
+               .decoder      = EM2820_SAA7114,
+               .input          = {{
+                       .type     = EM2820_VMUX_TELEVISION,
+                       .vmux     = 2,
+                       .amux     = 0,
+               },{
+                       .type     = EM2820_VMUX_COMPOSITE1,
+                       .vmux     = 0,
+                       .amux     = 1,
+               },{
+                       .type     = EM2820_VMUX_SVIDEO,
+                       .vmux     = 9,
+                       .amux     = 1,
+               }},
+       },
+       { }  /* Terminating entry */
+};
+
+/* table of devices that work with this driver */
+struct usb_device_id em2820_id_table [] = {
+ /* Terratec Cinerhy 200 USB: em2800 nor supported, at the moment */
+ /*    { USB_DEVICE(0xeb1a, 0x2800), .driver_info = EM2800_BOARD_TERRATEC_CINERGY_200 }, */
+       { USB_DEVICE(0x0ccd, 0x0036), .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 },
+       { USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
+       { USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
+       { USB_DEVICE(0xeb1a, 0x2820), .driver_info = EM2820_BOARD_MSI_VOX_USB_2 },
+       { },
+};
+
+void em2820_card_setup(struct em2820 *dev)
+{
+       /* request some modules */
+       if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) {
+               struct tveeprom tv;
+#ifdef CONFIG_MODULES
+               request_module("tveeprom");
+#endif
+               /* Call first TVeeprom */
+
+               tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
+
+               dev->tuner_type= tv.tuner_type;
+               if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
+                       dev->has_msp34xx=1;
+               } else dev->has_msp34xx=0;
+       }
+}
+
+EXPORT_SYMBOL(em2820_boards);
+EXPORT_SYMBOL(em2820_id_table);
+
+MODULE_DEVICE_TABLE (usb, em2820_id_table);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
new file mode 100644 (file)
index 0000000..a75a91d
--- /dev/null
@@ -0,0 +1,807 @@
+/*
+   em2820-core.c - driver for Empia EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
+                      Ludovico Cavedon <cavedon@sssup.it>
+                      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+   Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/videodev.h>
+#include <linux/usb.h>
+#include <linux/vmalloc.h>
+
+#include "em2820.h"
+
+/* #define ENABLE_DEBUG_ISOC_FRAMES */
+
+unsigned int core_debug = 0;
+module_param(core_debug,int,0644);
+MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+
+#define em2820_coredbg(fmt, arg...) do {\
+        if (core_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __FUNCTION__ , ##arg); } while (0)
+
+unsigned int reg_debug = 0;
+module_param(reg_debug,int,0644);
+MODULE_PARM_DESC(reg_debug,"enable debug messages [URB reg]");
+
+#define em2820_regdbg(fmt, arg...) do {\
+        if (reg_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __FUNCTION__ , ##arg); } while (0)
+
+unsigned int isoc_debug = 0;
+module_param(isoc_debug,int,0644);
+MODULE_PARM_DESC(core_debug,"enable debug messages [isoc transfers]");
+
+#define em2820_isocdbg(fmt, arg...) do {\
+        if (isoc_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __FUNCTION__ , ##arg); } while (0)
+
+static int alt = EM2820_PINOUT;
+module_param(alt, int, 0644);
+MODULE_PARM_DESC(alt, "alternate setting to use for video endpoint");
+
+/* ------------------------------------------------------------------ */
+/* debug help functions                                               */
+
+static const char *v4l1_ioctls[] = {
+       "0", "CGAP", "GCHAN", "SCHAN", "GTUNER", "STUNER", "GPICT", "SPICT",
+       "CCAPTURE", "GWIN", "SWIN", "GFBUF", "SFBUF", "KEY", "GFREQ",
+       "SFREQ", "GAUDIO", "SAUDIO", "SYNC", "MCAPTURE", "GMBUF", "GUNIT",
+       "GCAPTURE", "SCAPTURE", "SPLAYMODE", "SWRITEMODE", "GPLAYINFO",
+       "SMICROCODE", "GVBIFMT", "SVBIFMT" };
+#define V4L1_IOCTLS ARRAY_SIZE(v4l1_ioctls)
+
+static const char *v4l2_ioctls[] = {
+       "QUERYCAP", "1", "ENUM_PIXFMT", "ENUM_FBUFFMT", "G_FMT", "S_FMT",
+       "G_COMP", "S_COMP", "REQBUFS", "QUERYBUF", "G_FBUF", "S_FBUF",
+       "G_WIN", "S_WIN", "PREVIEW", "QBUF", "16", "DQBUF", "STREAMON",
+       "STREAMOFF", "G_PERF", "G_PARM", "S_PARM", "G_STD", "S_STD",
+       "ENUMSTD", "ENUMINPUT", "G_CTRL", "S_CTRL", "G_TUNER", "S_TUNER",
+       "G_FREQ", "S_FREQ", "G_AUDIO", "S_AUDIO", "35", "QUERYCTRL",
+       "QUERYMENU", "G_INPUT", "S_INPUT", "ENUMCVT", "41", "42", "43",
+       "44", "45",  "G_OUTPUT", "S_OUTPUT", "ENUMOUTPUT", "G_AUDOUT",
+       "S_AUDOUT", "ENUMFX", "G_EFFECT", "S_EFFECT", "G_MODULATOR",
+       "S_MODULATOR"
+};
+#define V4L2_IOCTLS ARRAY_SIZE(v4l2_ioctls)
+
+void em2820_print_ioctl(char *name, unsigned int cmd)
+{
+       char *dir;
+
+       switch (_IOC_DIR(cmd)) {
+       case _IOC_NONE:              dir = "--"; break;
+       case _IOC_READ:              dir = "r-"; break;
+       case _IOC_WRITE:             dir = "-w"; break;
+       case _IOC_READ | _IOC_WRITE: dir = "rw"; break;
+       default:                     dir = "??"; break;
+       }
+       switch (_IOC_TYPE(cmd)) {
+       case 'v':
+               printk(KERN_DEBUG "%s: ioctl 0x%08x (v4l1, %s, VIDIOC%s)\n",
+                      name, cmd, dir, (_IOC_NR(cmd) < V4L1_IOCTLS) ?
+                      v4l1_ioctls[_IOC_NR(cmd)] : "???");
+               break;
+       case 'V':
+               printk(KERN_DEBUG "%s: ioctl 0x%08x (v4l2, %s, VIDIOC_%s)\n",
+                      name, cmd, dir, (_IOC_NR(cmd) < V4L2_IOCTLS) ?
+                      v4l2_ioctls[_IOC_NR(cmd)] : "???");
+               break;
+       default:
+               printk(KERN_DEBUG "%s: ioctl 0x%08x (???, %s, #%d)\n",
+                      name, cmd, dir, _IOC_NR(cmd));
+       }
+}
+
+static void *rvmalloc(size_t size)
+{
+       void *mem;
+       unsigned long adr;
+
+       size = PAGE_ALIGN(size);
+
+       mem = vmalloc_32((unsigned long)size);
+       if (!mem)
+               return NULL;
+
+       memset(mem, 0, size);
+
+       adr = (unsigned long)mem;
+       while (size > 0) {
+               SetPageReserved(vmalloc_to_page((void *)adr));
+               adr += PAGE_SIZE;
+               size -= PAGE_SIZE;
+       }
+
+       return mem;
+}
+
+static void rvfree(void *mem, size_t size)
+{
+       unsigned long adr;
+
+       if (!mem)
+               return;
+
+       size = PAGE_ALIGN(size);
+
+       adr = (unsigned long)mem;
+       while (size > 0) {
+               ClearPageReserved(vmalloc_to_page((void *)adr));
+               adr += PAGE_SIZE;
+               size -= PAGE_SIZE;
+       }
+
+       vfree(mem);
+}
+
+/*
+ * em2820_request_buffers()
+ * allocate a number of buffers
+ */
+u32 em2820_request_buffers(struct em2820 *dev, u32 count)
+{
+       const size_t imagesize = PAGE_ALIGN(dev->frame_size);   /*needs to be page aligned cause the buffers can be mapped individually! */
+       void *buff = NULL;
+       u32 i;
+       em2820_coredbg("requested %i buffers with size %i", count, imagesize);
+       if (count > EM2820_NUM_FRAMES)
+               count = EM2820_NUM_FRAMES;
+
+       dev->num_frames = count;
+       while (dev->num_frames > 0) {
+               if ((buff = rvmalloc(dev->num_frames * imagesize)))
+                       break;
+               dev->num_frames--;
+       }
+
+       for (i = 0; i < dev->num_frames; i++) {
+               dev->frame[i].bufmem = buff + i * imagesize;
+               dev->frame[i].buf.index = i;
+               dev->frame[i].buf.m.offset = i * imagesize;
+               dev->frame[i].buf.length = dev->frame_size;
+               dev->frame[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+               dev->frame[i].buf.sequence = 0;
+               dev->frame[i].buf.field = V4L2_FIELD_NONE;
+               dev->frame[i].buf.memory = V4L2_MEMORY_MMAP;
+               dev->frame[i].buf.flags = 0;
+       }
+       return dev->num_frames;
+}
+
+/*
+ * em2820_queue_unusedframes()
+ * add all frames that are not currently in use to the inbuffer queue
+ */
+void em2820_queue_unusedframes(struct em2820 *dev)
+{
+       unsigned long lock_flags;
+       u32 i;
+
+       for (i = 0; i < dev->num_frames; i++)
+               if (dev->frame[i].state == F_UNUSED) {
+                       dev->frame[i].state = F_QUEUED;
+                       spin_lock_irqsave(&dev->queue_lock, lock_flags);
+                       list_add_tail(&dev->frame[i].frame, &dev->inqueue);
+                       spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
+               }
+}
+
+/*
+ * em2820_release_buffers()
+ * free frame buffers
+ */
+void em2820_release_buffers(struct em2820 *dev)
+{
+       if (dev->num_frames) {
+               rvfree(dev->frame[0].bufmem,
+                      dev->num_frames * PAGE_ALIGN(dev->frame[0].buf.length));
+               dev->num_frames = 0;
+       }
+}
+
+/*
+ * em2820_read_reg_req()
+ * reads data from the usb device specifying bRequest
+ */
+int em2820_read_reg_req_len(struct em2820 *dev, u8 req, u16 reg,
+                                  char *buf, int len)
+{
+       int ret, byte;
+
+       em2820_regdbg("req=%02x, reg=%02x ", req, reg);
+
+       ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
+                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             0x0000, reg, buf, len, HZ);
+
+       if (reg_debug){
+               printk(ret < 0 ? " failed!\n" : "%02x values: ", ret);
+               for (byte = 0; byte < len; byte++) {
+                       printk(" %02x", buf[byte]);
+               }
+               printk("\n");
+       }
+
+       return ret;
+}
+
+/*
+ * em2820_read_reg_req()
+ * reads data from the usb device specifying bRequest
+ */
+int em2820_read_reg_req(struct em2820 *dev, u8 req, u16 reg)
+{
+       u8 val;
+       int ret;
+
+       em2820_regdbg("req=%02x, reg=%02x:", req, reg);
+
+       ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), req,
+                             USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             0x0000, reg, &val, 1, HZ);
+
+       if (reg_debug)
+               printk(ret < 0 ? " failed!\n" : "%02x\n", val);
+
+       if (ret < 0)
+               return ret;
+
+       return val;
+}
+
+int em2820_read_reg(struct em2820 *dev, u16 reg)
+{
+       return em2820_read_reg_req(dev, USB_REQ_GET_STATUS, reg);
+}
+
+/*
+ * em2820_write_regs_req()
+ * sends data to the usb device, specifying bRequest
+ */
+int em2820_write_regs_req(struct em2820 *dev, u8 req, u16 reg, char *buf,
+                                int len)
+{
+       int ret;
+
+       /*usb_control_msg seems to expect a kmalloced buffer */
+       unsigned char *bufs = kmalloc(len, GFP_KERNEL);
+
+       em2820_regdbg("req=%02x reg=%02x:", req, reg);
+
+       if (reg_debug) {
+               int i;
+               for (i = 0; i < len; ++i)
+                       printk (" %02x", (unsigned char)buf[i]);
+               printk ("\n");
+       }
+
+       if (!bufs)
+               return -ENOMEM;
+       memcpy(bufs, buf, len);
+       ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), req,
+                             USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                             0x0000, reg, bufs, len, HZ);
+       mdelay(5);              /* FIXME: magic number */
+       kfree(bufs);
+       return ret;
+}
+
+int em2820_write_regs(struct em2820 *dev, u16 reg, char *buf, int len)
+{
+       return em2820_write_regs_req(dev, USB_REQ_GET_STATUS, reg, buf, len);
+}
+
+/*
+ * em2820_write_reg_bits()
+ * sets only some bits (specified by bitmask) of a register, by first reading
+ * the actual value
+ */
+int em2820_write_reg_bits(struct em2820 *dev, u16 reg, u8 val,
+                                u8 bitmask)
+{
+       int oldval;
+       u8 newval;
+       if ((oldval = em2820_read_reg(dev, reg)) < 0)
+               return oldval;
+       newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
+       return em2820_write_regs(dev, reg, &newval, 1);
+}
+
+/*
+ * em2820_write_ac97()
+ * write a 16 bit value to the specified AC97 address (LSB first!)
+ */
+int em2820_write_ac97(struct em2820 *dev, u8 reg, u8 * val)
+{
+       int ret;
+       u8 addr = reg & 0x7f;
+       if ((ret = em2820_write_regs(dev, AC97LSB_REG, val, 2)) < 0)
+               return ret;
+       if ((ret = em2820_write_regs(dev, AC97ADDR_REG, &addr, 1)) < 0)
+               return ret;
+       if ((ret = em2820_read_reg(dev, AC97BUSY_REG)) < 0)
+               return ret;
+       else if (((u8) ret) & 0x01) {
+               em2820_warn ("AC97 command still being exectuted: not handled properly!\n");
+       }
+       return 0;
+}
+
+int em2820_audio_analog_set(struct em2820 *dev)
+{
+       char s[2] = { 0x00, 0x00 };
+       s[0] |= 0x1f - dev->volume;
+       s[1] |= 0x1f - dev->volume;
+       if (dev->mute)
+               s[1] |= 0x80;
+       return em2820_write_ac97(dev, MASTER_AC97, s);
+}
+
+
+int em2820_colorlevels_set_default(struct em2820 *dev)
+{
+       em2820_write_regs(dev, YGAIN_REG, "\x10", 1);   /* contrast */
+       em2820_write_regs(dev, YOFFSET_REG, "\x00", 1); /* brightness */
+       em2820_write_regs(dev, UVGAIN_REG, "\x10", 1);  /* saturation */
+       em2820_write_regs(dev, UOFFSET_REG, "\x00", 1);
+       em2820_write_regs(dev, VOFFSET_REG, "\x00", 1);
+       em2820_write_regs(dev, SHARPNESS_REG, "\x00", 1);
+
+       em2820_write_regs(dev, GAMMA_REG, "\x20", 1);
+       em2820_write_regs(dev, RGAIN_REG, "\x20", 1);
+       em2820_write_regs(dev, GGAIN_REG, "\x20", 1);
+       em2820_write_regs(dev, BGAIN_REG, "\x20", 1);
+       em2820_write_regs(dev, ROFFSET_REG, "\x00", 1);
+       em2820_write_regs(dev, GOFFSET_REG, "\x00", 1);
+       return em2820_write_regs(dev, BOFFSET_REG, "\x00", 1);
+}
+
+int em2820_capture_start(struct em2820 *dev, int start)
+{
+       int ret;
+       /* FIXME: which is the best order? */
+       /* video registers are sampled by VREF */
+       if ((ret = em2820_write_reg_bits(dev, USBSUSP_REG, start ? 0x10 : 0x00,
+                                         0x10)) < 0)
+               return ret;
+       /* enable video capture */
+       return em2820_write_regs(dev, VINENABLE_REG, start ? "\x67" : "\x27", 1);
+}
+
+int em2820_outfmt_set_yuv422(struct em2820 *dev)
+{
+       em2820_write_regs(dev, OUTFMT_REG, "\x34", 1);
+       em2820_write_regs(dev, VINMODE_REG, "\x10", 1);
+       return em2820_write_regs(dev, VINCTRL_REG, "\x11", 1);
+}
+
+int em2820_accumulator_set(struct em2820 *dev, u8 xmin, u8 xmax, u8 ymin,
+                                 u8 ymax)
+{
+       em2820_coredbg("em2820 Scale: (%d,%d)-(%d,%d)\n", xmin, ymin, xmax, ymax);
+
+       em2820_write_regs(dev, XMIN_REG, &xmin, 1);
+       em2820_write_regs(dev, XMAX_REG, &xmax, 1);
+       em2820_write_regs(dev, YMIN_REG, &ymin, 1);
+       return em2820_write_regs(dev, YMAX_REG, &ymax, 1);
+}
+
+int em2820_capture_area_set(struct em2820 *dev, u8 hstart, u8 vstart,
+                                  u16 width, u16 height)
+{
+       u8 cwidth = width;
+       u8 cheight = height;
+       u8 overflow = (height >> 7 & 0x02) | (width >> 8 & 0x01);
+
+       em2820_coredbg("em2820 Area Set: (%d,%d)\n", (width | (overflow & 2) << 7),
+                       (height | (overflow & 1) << 8));
+
+       em2820_write_regs(dev, HSTART_REG, &hstart, 1);
+       em2820_write_regs(dev, VSTART_REG, &vstart, 1);
+       em2820_write_regs(dev, CWIDTH_REG, &cwidth, 1);
+       em2820_write_regs(dev, CHEIGHT_REG, &cheight, 1);
+       return em2820_write_regs(dev, OFLOW_REG, &overflow, 1);
+}
+
+int em2820_scaler_set(struct em2820 *dev, u16 h, u16 v)
+{
+       u8 buf[2];
+       buf[0] = h;
+       buf[1] = h >> 8;
+       em2820_write_regs(dev, HSCALELOW_REG, (char *)buf, 2);
+       buf[0] = v;
+       buf[1] = v >> 8;
+       em2820_write_regs(dev, VSCALELOW_REG, (char *)buf, 2);
+       /* when H and V mixershould be used? */
+       /*      return em2820_write_reg_bits(dev, COMPR_REG, (h ? 0x20 : 0x00) | (v ? 0x10 : 0x00), 0x30); */
+       /* it seems that both H and V scalers must be active to work correctly */
+       return em2820_write_reg_bits(dev, COMPR_REG, h
+                       || v ? 0x30 : 0x00, 0x30);
+}
+
+/* FIXME: this only function read values from dev */
+int em2820_resolution_set(struct em2820 *dev)
+{
+       int width, height;
+       width = norm_maxw(dev);
+       height = norm_maxh(dev) >> 1;
+
+       em2820_outfmt_set_yuv422(dev);
+       em2820_accumulator_set(dev, 1, (width - 4) >> 2, 1, (height - 4) >> 2);
+       em2820_capture_area_set(dev, 0, 0, width >> 2, height >> 2);
+       return em2820_scaler_set(dev, dev->hscale, dev->vscale);
+}
+
+
+/******************* isoc transfer handling ****************************/
+
+#ifdef ENABLE_DEBUG_ISOC_FRAMES
+static void em2820_isoc_dump(struct urb *urb, struct pt_regs *regs)
+{
+       int len = 0;
+       int ntrans = 0;
+       int i;
+
+       printk(KERN_DEBUG "isocIrq: sf=%d np=%d ec=%x\n",
+              urb->start_frame, urb->number_of_packets,
+              urb->error_count);
+       for (i = 0; i < urb->number_of_packets; i++) {
+               unsigned char *buf =
+                               urb->transfer_buffer +
+                               urb->iso_frame_desc[i].offset;
+               int alen = urb->iso_frame_desc[i].actual_length;
+               if (alen > 0) {
+                       if (buf[0] == 0x88) {
+                               ntrans++;
+                               len += alen;
+                       } else if (buf[0] == 0x22) {
+                               printk(KERN_DEBUG
+                                               "= l=%d nt=%d bpp=%d\n",
+                               len - 4 * ntrans, ntrans,
+                               ntrans == 0 ? 0 : len / ntrans);
+                               ntrans = 1;
+                               len = alen;
+                       } else
+                               printk(KERN_DEBUG "!\n");
+               }
+               printk(KERN_DEBUG "   n=%d s=%d al=%d %x\n", i,
+                      urb->iso_frame_desc[i].status,
+                      urb->iso_frame_desc[i].actual_length,
+                      (unsigned int)
+                                      *((unsigned char *)(urb->transfer_buffer +
+                                      urb->iso_frame_desc[i].
+                                      offset)));
+       }
+}
+#endif
+
+static inline int em2820_isoc_video(struct em2820 *dev,struct em2820_frame_t **f,
+                                   unsigned long *lock_flags, unsigned char buf)
+{
+       if (!(buf & 0x01)) {
+               if ((*f)->state == F_GRABBING) {
+                       /*previous frame is incomplete */
+                       if ((*f)->fieldbytesused < dev->field_size) {
+                               (*f)->state = F_ERROR;
+                               em2820_isocdbg ("dropping incomplete bottom field (%i missing bytes)",
+                                        dev->field_size-(*f)->fieldbytesused);
+                       } else {
+                               (*f)->state = F_DONE;
+                               (*f)->buf.bytesused = dev->frame_size;
+                       }
+               }
+               if ((*f)->state == F_DONE || (*f)->state == F_ERROR) {
+                       /* move current frame to outqueue and get next free buffer from inqueue */
+                       spin_lock_irqsave(&dev-> queue_lock, *lock_flags);
+                       list_move_tail(&(*f)->frame, &dev->outqueue);
+                       if (!list_empty(&dev->inqueue))
+                               (*f) = list_entry(dev-> inqueue.next,
+                       struct em2820_frame_t,frame);
+                       else
+                               (*f) = NULL;
+                       spin_unlock_irqrestore(&dev->queue_lock,*lock_flags);
+               }
+               if (!(*f)) {
+                       em2820_isocdbg ("new frame but no buffer is free");
+                       return -1;
+               }
+               do_gettimeofday(&(*f)->buf.timestamp);
+               (*f)->buf.sequence = ++dev->frame_count;
+               (*f)->buf.field = V4L2_FIELD_INTERLACED;
+               (*f)->state = F_GRABBING;
+               (*f)->buf.bytesused = 0;
+               (*f)->top_field = 1;
+               (*f)->fieldbytesused = 0;
+       } else {
+                                       /* acquiring bottom field */
+               if ((*f)->state == F_GRABBING) {
+                       if (!(*f)->top_field) {
+                               (*f)->state = F_ERROR;
+                               em2820_isocdbg ("unexpected begin of bottom field; discarding it");
+                       } else if ((*f)-> fieldbytesused < dev->field_size - 172) {
+                               (*f)->state = F_ERROR;
+                               em2820_isocdbg ("dropping incomplete top field (%i missing bytes)",
+                                        dev->field_size-(*f)->fieldbytesused);
+                       } else {
+                               (*f)->top_field = 0;
+                               (*f)->fieldbytesused = 0;
+                       }
+               }
+       }
+       return (0);
+}
+
+static inline void em2820_isoc_video_copy(struct em2820 *dev,
+                                         struct em2820_frame_t **f, unsigned char *buf, int len)
+{
+       void *fieldstart, *startwrite, *startread;
+       int linesdone, currlinedone, offset, lencopy,remain;
+
+       if ((*f)->fieldbytesused + len > dev->field_size)
+               len =dev->field_size - (*f)->fieldbytesused;
+       remain = len;
+       startread = buf + 4;
+       if ((*f)->top_field)
+               fieldstart = (*f)->bufmem;
+       else
+               fieldstart = (*f)->bufmem + dev->bytesperline;
+
+       linesdone = (*f)->fieldbytesused / dev->bytesperline;
+       currlinedone = (*f)->fieldbytesused % dev->bytesperline;
+       offset = linesdone * dev->bytesperline * 2 + currlinedone;
+       startwrite = fieldstart + offset;
+       lencopy = dev->bytesperline - currlinedone;
+       lencopy = lencopy > remain ? remain : lencopy;
+
+       memcpy(startwrite, startread, lencopy);
+       remain -= lencopy;
+
+       while (remain > 0) {
+               startwrite += lencopy + dev->bytesperline;
+               startread += lencopy;
+               if (dev->bytesperline > remain)
+                       lencopy = remain;
+               else
+                       lencopy = dev->bytesperline;
+
+               memcpy(startwrite, startread, lencopy);
+               remain -= lencopy;
+       }
+
+       (*f)->fieldbytesused += len;
+}
+
+/*
+ * em2820_isoIrq()
+ * handles the incoming isoc urbs and fills the frames from our inqueue
+ */
+void em2820_isocIrq(struct urb *urb, struct pt_regs *regs)
+{
+       struct em2820 *dev = urb->context;
+       int i, status;
+       struct em2820_frame_t **f;
+       unsigned long lock_flags;
+
+       if (!dev)
+               return;
+#ifdef ENABLE_DEBUG_ISOC_FRAMES
+       if (isoc_debug>1)
+               em2820_isoc_dump(urb, regs);
+#endif
+
+       if (urb->status == -ENOENT)
+               return;
+
+       f = &dev->frame_current;
+
+       if (dev->stream == STREAM_INTERRUPT) {
+               dev->stream = STREAM_OFF;
+               if ((*f))
+                       (*f)->state = F_QUEUED;
+               em2820_isocdbg("stream interrupted");
+               wake_up_interruptible(&dev->wait_stream);
+       }
+
+       if ((dev->state & DEV_DISCONNECTED) || (dev->state & DEV_MISCONFIGURED))
+               return;
+
+       if (dev->stream == STREAM_ON && !list_empty(&dev->inqueue)) {
+               if (!(*f))
+                       (*f) = list_entry(dev->inqueue.next,
+               struct em2820_frame_t, frame);
+
+               for (i = 0; i < urb->number_of_packets; i++) {
+                       unsigned char *buf = urb->transfer_buffer +
+                                       urb->iso_frame_desc[i].offset;
+                       int len = urb->iso_frame_desc[i].actual_length - 4;
+
+                       if (urb->iso_frame_desc[i].status) {
+                               em2820_isocdbg("data error: [%d] len=%d, status=%d", i,
+                                       urb->iso_frame_desc[i].actual_length,
+                                       urb->iso_frame_desc[i].status);
+                               continue;
+                       }
+                       if (urb->iso_frame_desc[i].actual_length <= 0) {
+                               em2820_isocdbg("packet %d is empty",i);
+                               continue;
+                       }
+                       if (urb->iso_frame_desc[i].actual_length >
+                                                dev->max_pkt_size) {
+                               em2820_isocdbg("packet bigger than packet size");
+                               continue;
+                       }
+                       /*new frame */
+                       if (buf[0] == 0x22 && buf[1] == 0x5a) {
+                               em2820_isocdbg("Video frame, length=%i!",len);
+
+                               if (em2820_isoc_video(dev,f,&lock_flags,buf[2]))
+                               break;
+                       } else if (buf[0]==0x33 && buf[1]==0x95 && buf[2]==0x00) {
+                               em2820_isocdbg("VBI HEADER!!!");
+                       }
+
+                       /* actual copying */
+                       if ((*f)->state == F_GRABBING) {
+                               em2820_isoc_video_copy(dev,f,buf, len);
+                       }
+               }
+       }
+
+       for (i = 0; i < urb->number_of_packets; i++) {
+               urb->iso_frame_desc[i].status = 0;
+               urb->iso_frame_desc[i].actual_length = 0;
+       }
+
+       urb->status = 0;
+       if ((status = usb_submit_urb(urb, GFP_ATOMIC))) {
+               em2820_errdev("resubmit of urb failed (error=%i)\n", status);
+               dev->state |= DEV_MISCONFIGURED;
+       }
+       wake_up_interruptible(&dev->wait_frame);
+       return;
+}
+
+/*
+ * em2820_uninit_isoc()
+ * deallocates the buffers and urbs allocated during em2820_init_iosc()
+ */
+void em2820_uninit_isoc(struct em2820 *dev)
+{
+       int i;
+
+       for (i = 0; i < EM2820_NUM_BUFS; i++) {
+               if (dev->urb[i]) {
+                       usb_kill_urb(dev->urb[i]);
+                       usb_free_urb(dev->urb[i]);
+               }
+               dev->urb[i] = NULL;
+               if (dev->transfer_buffer[i])
+                       kfree(dev->transfer_buffer[i]);
+               dev->transfer_buffer[i] = NULL;
+       }
+       em2820_capture_start(dev, 0);
+}
+
+/*
+ * em2820_init_isoc()
+ * allocates transfer buffers and submits the urbs for isoc transfer
+ */
+int em2820_init_isoc(struct em2820 *dev)
+{
+       /* change interface to 3 which allowes the biggest packet sizes */
+       int i, errCode;
+       const int sb_size = EM2820_NUM_PACKETS * dev->max_pkt_size;
+
+       /* reset streaming vars */
+       dev->frame_current = NULL;
+       dev->frame_count = 0;
+
+       /* allocate urbs */
+       for (i = 0; i < EM2820_NUM_BUFS; i++) {
+               struct urb *urb;
+               int j, k;
+               /* allocate transfer buffer */
+               dev->transfer_buffer[i] = kmalloc(sb_size, GFP_KERNEL);
+               if (!dev->transfer_buffer[i]) {
+                       em2820_errdev
+                                       ("unable to allocate %i bytes for transfer buffer %i\n",
+                                        sb_size, i);
+                       em2820_uninit_isoc(dev);
+                       return -ENOMEM;
+               }
+               memset(dev->transfer_buffer[i], 0, sb_size);
+               urb = usb_alloc_urb(EM2820_NUM_PACKETS, GFP_KERNEL);
+               if (urb) {
+                       urb->dev = dev->udev;
+                       urb->context = dev;
+                       urb->pipe = usb_rcvisocpipe(dev->udev, 0x82);
+                       urb->transfer_flags = URB_ISO_ASAP;
+                       urb->interval = 1;
+                       urb->transfer_buffer = dev->transfer_buffer[i];
+                       urb->complete = em2820_isocIrq;
+                       urb->number_of_packets = EM2820_NUM_PACKETS;
+                       urb->transfer_buffer_length = sb_size;
+                       for (j = k = 0; j < EM2820_NUM_PACKETS;
+                                                 j++, k += dev->max_pkt_size) {
+                                                         urb->iso_frame_desc[j].offset = k;
+                                                         urb->iso_frame_desc[j].length =
+                                                                         dev->max_pkt_size;
+                                                 }
+                                                 dev->urb[i] = urb;
+               } else {
+                       em2820_errdev("cannot alloc urb %i\n", i);
+                       em2820_uninit_isoc(dev);
+                       return -ENOMEM;
+               }
+       }
+
+       /* submit urbs */
+       for (i = 0; i < EM2820_NUM_BUFS; i++) {
+               errCode = usb_submit_urb(dev->urb[i], GFP_KERNEL);
+               if (errCode) {
+                       em2820_errdev("submit of urb %i failed (error=%i)\n", i,
+                                     errCode);
+                       em2820_uninit_isoc(dev);
+                       return errCode;
+               }
+       }
+
+       return 0;
+}
+
+int em2820_set_alternate(struct em2820 *dev)
+{
+       int errCode, prev_alt = dev->alt;
+       dev->alt = alt;
+       if (dev->alt == 0) {
+               int i;
+               unsigned int min_pkt_size = dev->field_size / 137;      /* FIXME: empiric magic number */
+               em2820_coredbg("minimum isoc packet size: %u", min_pkt_size);
+               dev->alt = 7;
+               for (i = 1; i < EM2820_MAX_ALT; i += 2) /* FIXME: skip even alternate: why do they not work? */
+                       if (dev->alt_max_pkt_size[i] >= min_pkt_size) {
+                       dev->alt = i;
+                       break;
+                       }
+       }
+
+       if (dev->alt != prev_alt) {
+               dev->max_pkt_size = dev->alt_max_pkt_size[dev->alt];
+               em2820_coredbg("setting alternate %d with wMaxPacketSize=%u", dev->alt,
+                      dev->max_pkt_size);
+               errCode = usb_set_interface(dev->udev, 0, dev->alt);
+               if (errCode < 0) {
+                       em2820_errdev
+                                       ("cannot change alternate number to %d (error=%i)\n",
+                                        dev->alt, errCode);
+                       return errCode;
+               }
+       }
+       return 0;
+}
diff --git a/drivers/media/video/em28xx/em28xx-i2c.c b/drivers/media/video/em28xx/em28xx-i2c.c
new file mode 100644 (file)
index 0000000..95f80a7
--- /dev/null
@@ -0,0 +1,443 @@
+/*
+   em2820-i2c.c - driver for Empia EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
+                      Ludovico Cavedon <cavedon@sssup.it>
+                      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+   Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/videodev.h>
+#include <media/tuner.h>
+#include <linux/video_decoder.h>
+
+/* To be moved to compat.h */
+#if !defined(I2C_HW_B_EM2820)
+#define I2C_HW_B_EM2820 I2C_HW_B_BT848
+#endif
+
+#include "em2820.h"
+
+/* ----------------------------------------------------------- */
+
+static unsigned int i2c_scan = 0;
+module_param(i2c_scan, int, 0444);
+MODULE_PARM_DESC(i2c_scan, "scan i2c bus at insmod time");
+
+static unsigned int i2c_debug = 0;
+module_param(i2c_debug, int, 0644);
+MODULE_PARM_DESC(i2c_debug, "enable debug messages [i2c]");
+
+#define dprintk(fmt, args...) if (i2c_debug) do {\
+                       printk(KERN_DEBUG "%s: %s: " fmt "\n",\
+                       dev->name, __FUNCTION__ , ##args); } while (0)
+#define dprintk1(fmt, args...) if (i2c_debug) do{ \
+                       printk(KERN_DEBUG "%s: %s: " fmt, \
+                       dev->name, __FUNCTION__ , ##args); } while (0)
+#define dprintk2(fmt, args...) if (i2c_debug) do {\
+                       printk(fmt , ##args); } while (0)
+
+/*
+ * i2c_send_bytes()
+ * untested for more than 4 bytes
+ */
+static int i2c_send_bytes(void *data, unsigned char addr, char *buf, short len,
+                         int stop)
+{
+       int wrcount = 0;
+       struct em2820 *dev = (struct em2820 *)data;
+
+       wrcount = dev->em2820_write_regs_req(dev, stop ? 2 : 3, addr, buf, len);
+
+       return wrcount;
+}
+
+/*
+ * i2c_recv_byte()
+ * read a byte from the i2c device
+ */
+static int i2c_recv_bytes(struct em2820 *dev, unsigned char addr, char *buf,
+                         int len)
+{
+       int ret;
+       ret = dev->em2820_read_reg_req_len(dev, 2, addr, buf, len);
+       if (ret < 0) {
+               em2820_warn("reading i2c device failed (error=%i)\n", ret);
+               return ret;
+       }
+       if (dev->em2820_read_reg(dev, 0x5) != 0)
+               return -ENODEV;
+       return ret;
+}
+
+/*
+ * i2c_check_for_device()
+ * check if there is a i2c_device at the supplied address
+ */
+static int i2c_check_for_device(struct em2820 *dev, unsigned char addr)
+{
+       char msg;
+       int ret;
+       msg = addr;
+
+       ret = dev->em2820_read_reg_req(dev, 2, addr);
+       if (ret < 0) {
+               em2820_warn("reading from i2c device failed (error=%i)\n", ret);
+               return ret;
+       }
+       if (dev->em2820_read_reg(dev, 0x5) != 0)
+               return -ENODEV;
+       return 0;
+}
+
+/*
+ * em2820_i2c_xfer()
+ * the main i2c transfer function
+ */
+static int em2820_i2c_xfer(struct i2c_adapter *i2c_adap,
+                          struct i2c_msg msgs[], int num)
+{
+       struct em2820 *dev = i2c_adap->algo_data;
+       int addr, rc, i, byte;
+
+       if (num <= 0)
+               return 0;
+       for (i = 0; i < num; i++) {
+               addr = msgs[i].addr << 1;
+               dprintk1("%s %s addr=%x len=%d:",
+                        (msgs[i].flags & I2C_M_RD) ? "read" : "write",
+                        i == num - 1 ? "stop" : "nonstop", addr, msgs[i].len);
+               if (!msgs[i].len) {     /* no len: check only for device presence */
+                       rc = i2c_check_for_device(dev, addr);
+                       if (rc < 0) {
+                               dprintk2(" no device\n");
+                               return rc;
+                       }
+
+               }
+               if (msgs[i].flags & I2C_M_RD) {
+                       /* read bytes */
+
+                       rc = i2c_recv_bytes(dev, addr, msgs[i].buf,
+                                           msgs[i].len);
+                       if (i2c_debug) {
+                               for (byte = 0; byte < msgs[i].len; byte++) {
+                                       printk(" %02x", msgs[i].buf[byte]);
+                               }
+                       }
+               } else {
+                       /* write bytes */
+                       if (i2c_debug) {
+                               for (byte = 0; byte < msgs[i].len; byte++)
+                                       printk(" %02x", msgs[i].buf[byte]);
+                       }
+                       rc = i2c_send_bytes(dev, addr, msgs[i].buf, msgs[i].len,
+                                           i == num - 1);
+                       if (rc < 0)
+                               goto err;
+               }
+               if (i2c_debug)
+                       printk("\n");
+       }
+
+       return num;
+      err:
+       dprintk2(" ERROR: %i\n", rc);
+       return rc;
+}
+
+static int em2820_i2c_eeprom(struct em2820 *dev, unsigned char *eedata, int len)
+{
+       unsigned char buf, *p = eedata;
+       struct em2820_eeprom *em_eeprom = (void *)eedata;
+       int i, err, size = len, block;
+
+       dev->i2c_client.addr = 0xa0 >> 1;
+       buf = 0;
+       if (1 != (err = i2c_master_send(&dev->i2c_client, &buf, 1))) {
+               printk(KERN_INFO "%s: Huh, no eeprom present (err=%d)?\n",
+                      dev->name, err);
+               return -1;
+       }
+       while (size > 0) {
+               if (size > 16)
+                       block = 16;
+               else
+                       block = size;
+
+               if (block !=
+                   (err = i2c_master_recv(&dev->i2c_client, p, block))) {
+                       printk(KERN_WARNING
+                              "%s: i2c eeprom read error (err=%d)\n",
+                              dev->name, err);
+                       return -1;
+               }
+               size -= block;
+               p += block;
+       }
+       for (i = 0; i < len; i++) {
+               if (0 == (i % 16))
+                       printk(KERN_INFO "%s: i2c eeprom %02x:", dev->name, i);
+               printk(" %02x", eedata[i]);
+               if (15 == (i % 16))
+                       printk("\n");
+       }
+
+       printk(KERN_INFO "EEPROM ID= 0x%08x\n", em_eeprom->id);
+       printk(KERN_INFO "Vendor/Product ID= %04x:%04x\n", em_eeprom->vendor_ID,
+              em_eeprom->product_ID);
+
+       switch (em_eeprom->chip_conf >> 4 & 0x3) {
+       case 0:
+               printk(KERN_INFO "No audio on board.\n");
+               break;
+       case 1:
+               printk(KERN_INFO "AC97 audio (5 sample rates)\n");
+               break;
+       case 2:
+               printk(KERN_INFO "I2S audio, sample rate=32k\n");
+               break;
+       case 3:
+               printk(KERN_INFO "I2S audio, 3 sample rates\n");
+               break;
+       }
+
+       if (em_eeprom->chip_conf & 1 << 3)
+               printk(KERN_INFO "USB Remote wakeup capable\n");
+
+       if (em_eeprom->chip_conf & 1 << 2)
+               printk(KERN_INFO "USB Self power capable\n");
+
+       switch (em_eeprom->chip_conf & 0x3) {
+       case 0:
+               printk(KERN_INFO "500mA max power\n");
+               break;
+       case 1:
+               printk(KERN_INFO "400mA max power\n");
+               break;
+       case 2:
+               printk(KERN_INFO "300mA max power\n");
+               break;
+       case 3:
+               printk(KERN_INFO "200mA max power\n");
+               break;
+       }
+
+       return 0;
+}
+
+/* ----------------------------------------------------------- */
+
+/*
+ * algo_control()
+ */
+static int algo_control(struct i2c_adapter *adapter,
+                       unsigned int cmd, unsigned long arg)
+{
+       return 0;
+}
+
+/*
+ * functionality()
+ */
+static u32 functionality(struct i2c_adapter *adap)
+{
+       return I2C_FUNC_SMBUS_EMUL;
+}
+
+#ifndef I2C_PEC
+static void inc_use(struct i2c_adapter *adap)
+{
+       MOD_INC_USE_COUNT;
+}
+
+static void dec_use(struct i2c_adapter *adap)
+{
+       MOD_DEC_USE_COUNT;
+}
+#endif
+
+static int em2820_set_tuner(int check_eeprom, struct i2c_client *client)
+{
+       struct em2820 *dev = client->adapter->algo_data;
+
+       struct tuner_setup tun_setup;
+
+       /* tuner */
+       if (dev->has_tuner) {
+               tun_setup.mode_mask = T_ANALOG_TV | T_RADIO;
+               tun_setup.type = dev->tuner_type;
+               tun_setup.addr = dev->tuner_addr;
+
+               em2820_i2c_call_clients(dev, TUNER_SET_TYPE_ADDR, &tun_setup);
+       }
+       return (0);
+}
+
+/*
+ * attach_inform()
+ * gets called when a device attaches to the i2c bus
+ * does some basic configuration
+ */
+static int attach_inform(struct i2c_client *client)
+{
+       struct em2820 *dev = client->adapter->algo_data;
+
+       dprintk("address %x", client->addr << 1);
+       switch (client->addr << 1) {
+       case 0x68:
+               em2820_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf);
+               break;
+       case 0x4a:
+               dprintk1("attach_inform: saa7113 detected.\n");
+               break;
+       case 0xa0:
+               dprintk1("attach_inform: eeprom detected.\n");
+               break;
+       case 0x80:
+       case 0x88:
+               dprintk1("attach_inform: msp34xx detected.\n");
+               break;
+       case 0xb8:
+       case 0xba:
+               dprintk1("attach_inform: tvp5150 detected.\n");
+               break;
+       default:
+               dev->tuner_addr = client->addr;
+               em2820_set_tuner(-1, client);
+       }
+
+       return 0;
+}
+
+static struct i2c_algorithm em2820_algo = {
+       .name          = "em2820",
+       .id            = I2C_HW_B_EM2820,
+       .master_xfer   = em2820_i2c_xfer,
+       .algo_control  = algo_control,
+       .functionality = functionality,
+};
+
+static struct i2c_adapter em2820_adap_template = {
+#ifdef I2C_PEC
+       .owner = THIS_MODULE,
+#else
+       .inc_use = inc_use,
+       .dec_use = dec_use,
+#endif
+#ifdef I2C_CLASS_TV_ANALOG
+       .class = I2C_CLASS_TV_ANALOG,
+#endif
+       .name = "em2820",
+       .id = I2C_HW_B_EM2820,
+       .algo = &em2820_algo,
+       .client_register = attach_inform,
+};
+
+static struct i2c_client em2820_client_template = {
+       .name = "em2820 internal",
+       .flags = I2C_CLIENT_ALLOW_USE,
+};
+
+/* ----------------------------------------------------------- */
+
+/*
+ * i2c_devs
+ * incomplete list of known devices
+ */
+static char *i2c_devs[128] = {
+       [0x4a >> 1] = "saa7113h",
+       [0x60 >> 1] = "remote IR sensor",
+       [0x86 >> 1] = "tda9887",
+       [0x80 >> 1] = "msp34xx",
+       [0x88 >> 1] = "msp34xx",
+       [0xa0 >> 1] = "eeprom",
+       [0xb8 >> 1] = "tvp5150a",
+       [0xba >> 1] = "tvp5150a",
+       [0xc0 >> 1] = "tuner (analog)",
+       [0xc2 >> 1] = "tuner (analog)",
+       [0xc4 >> 1] = "tuner (analog)",
+       [0xc6 >> 1] = "tuner (analog)",
+};
+
+/*
+ * do_i2c_scan()
+ * check i2c address range for devices
+ */
+static void do_i2c_scan(char *name, struct i2c_client *c)
+{
+       unsigned char buf;
+       int i, rc;
+
+       for (i = 0; i < 128; i++) {
+               c->addr = i;
+               rc = i2c_master_recv(c, &buf, 0);
+               if (rc < 0)
+                       continue;
+               printk(KERN_INFO "%s: found device @ 0x%x [%s]", name,
+                      i << 1, i2c_devs[i] ? i2c_devs[i] : "???");
+       }
+}
+
+/*
+ * em2820_i2c_call_clients()
+ * send commands to all attached i2c devices
+ */
+void em2820_i2c_call_clients(struct em2820 *dev, unsigned int cmd, void *arg)
+{
+       BUG_ON(NULL == dev->i2c_adap.algo_data);
+       i2c_clients_command(&dev->i2c_adap, cmd, arg);
+}
+
+/*
+ * em2820_i2c_register()
+ * register i2c bus
+ */
+int em2820_i2c_register(struct em2820 *dev)
+{
+       BUG_ON(!dev->em2820_write_regs || !dev->em2820_read_reg);
+       BUG_ON(!dev->em2820_write_regs_req || !dev->em2820_read_reg_req);
+       dev->i2c_adap = em2820_adap_template;
+       dev->i2c_adap.dev.parent = &dev->udev->dev;
+       strcpy(dev->i2c_adap.name, dev->name);
+       dev->i2c_adap.algo_data = dev;
+       i2c_add_adapter(&dev->i2c_adap);
+
+       dev->i2c_client = em2820_client_template;
+       dev->i2c_client.adapter = &dev->i2c_adap;
+
+       em2820_i2c_eeprom(dev, dev->eedata, sizeof(dev->eedata));
+
+       if (i2c_scan)
+               do_i2c_scan(dev->name, &dev->i2c_client);
+       return 0;
+}
+
+/*
+ * em2820_i2c_unregister()
+ * unregister i2c_bus
+ */
+int em2820_i2c_unregister(struct em2820 *dev)
+{
+       i2c_del_adapter(&dev->i2c_adap);
+       return 0;
+}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
new file mode 100644 (file)
index 0000000..a000131
--- /dev/null
@@ -0,0 +1,1815 @@
+/*
+   em2820-video.c - driver for Empia EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
+                      Ludovico Cavedon <cavedon@sssup.it>
+                      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+   Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/usb.h>
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+#include <media/tuner.h>
+#include <linux/video_decoder.h>
+
+#include "em2820.h"
+
+#define DRIVER_AUTHOR "Markus Rechberger <mrechberger@gmail.com>, " \
+                       "Ludovico Cavedon <cavedon@sssup.it>, " \
+                       "Mauro Carvalho Chehab <mchehab@brturbo.com.br>"
+
+#define DRIVER_NAME         "em2820"
+#define DRIVER_DESC         "Empia em2820 based USB video device driver"
+#define EM2820_VERSION_CODE  KERNEL_VERSION(0, 0, 1)
+
+#define em2820_videodbg(fmt, arg...) do {\
+        if (video_debug) \
+                printk(KERN_INFO "%s %s :"fmt, \
+                         dev->name, __FUNCTION__ , ##arg); } while (0)
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+static int tuner = -1;
+module_param(tuner, int, 0444);
+MODULE_PARM_DESC(tuner, "tuner type");
+
+static unsigned int video_debug = 0;
+module_param(video_debug,int,0644);
+MODULE_PARM_DESC(video_debug,"enable debug messages [video]");
+
+/* supported tv norms */
+static struct em2820_tvnorm tvnorms[] = {
+       {
+               .name = "PAL",
+               .id = V4L2_STD_PAL,
+               .mode = VIDEO_MODE_PAL,
+        }, {
+               .name = "NTSC",
+               .id = V4L2_STD_NTSC,
+               .mode = VIDEO_MODE_NTSC,
+       }, {
+                .name = "SECAM",
+                .id = V4L2_STD_SECAM,
+                .mode = VIDEO_MODE_SECAM,
+       }, {
+               .name = "PAL-M",
+               .id = V4L2_STD_PAL_M,
+               .mode = VIDEO_MODE_PAL,
+       }
+};
+
+#define TVNORMS ARRAY_SIZE(tvnorms)
+
+/* supported controls */
+static struct v4l2_queryctrl em2820_qctrl[] = {
+       {
+               .id = V4L2_CID_BRIGHTNESS,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Brightness",
+               .minimum = -128,
+               .maximum = 127,
+               .step = 1,
+               .default_value = 0,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_CONTRAST,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Contrast",
+               .minimum = 0x0,
+               .maximum = 0x1f,
+               .step = 0x1,
+               .default_value = 0x10,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_SATURATION,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Saturation",
+               .minimum = 0x0,
+               .maximum = 0x1f,
+               .step = 0x1,
+               .default_value = 0x10,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_AUDIO_VOLUME,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Volume",
+               .minimum = 0x0,
+               .maximum = 0x1f,
+               .step = 0x1,
+               .default_value = 0x1f,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_AUDIO_MUTE,
+               .type = V4L2_CTRL_TYPE_BOOLEAN,
+               .name = "Mute",
+               .minimum = 0,
+               .maximum = 1,
+               .step = 1,
+               .default_value = 1,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_RED_BALANCE,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Red chroma balance",
+               .minimum = -128,
+               .maximum = 127,
+               .step = 1,
+               .default_value = 0,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_BLUE_BALANCE,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Blue chroma balance",
+               .minimum = -128,
+               .maximum = 127,
+               .step = 1,
+               .default_value = 0,
+               .flags = 0,
+       },{
+               .id = V4L2_CID_GAMMA,
+               .type = V4L2_CTRL_TYPE_INTEGER,
+               .name = "Gamma",
+               .minimum = 0x0,
+               .maximum = 0x3f,
+               .step = 0x1,
+               .default_value = 0x20,
+               .flags = 0,
+        }
+};
+
+static struct usb_driver em2820_usb_driver;
+
+static DECLARE_MUTEX(em2820_sysfs_lock);
+static DECLARE_RWSEM(em2820_disconnect);
+
+/*********************  v4l2 interface  ******************************************/
+
+static inline unsigned long kvirt_to_pa(unsigned long adr)
+{
+       unsigned long kva, ret;
+
+       kva = (unsigned long)page_address(vmalloc_to_page((void *)adr));
+       kva |= adr & (PAGE_SIZE - 1);
+       ret = __pa(kva);
+       return ret;
+}
+
+/*
+ * em2820_config()
+ * inits registers with sane defaults
+ */
+static int em2820_config(struct em2820 *dev)
+{
+
+       /* Sets I2C speed to 100 KHz */
+       em2820_write_regs_req(dev, 0x00, 0x06, "\x40", 1);
+
+       /* enable vbi capturing */
+       em2820_audio_usb_mute(dev, 1);
+       dev->mute = 1;          /* maybe not the right place... */
+       dev->volume = 0x1f;
+       em2820_audio_analog_set(dev);
+       em2820_audio_analog_setup(dev);
+       em2820_outfmt_set_yuv422(dev);
+       em2820_colorlevels_set_default(dev);
+       em2820_compression_disable(dev);
+
+       return 0;
+}
+
+/*
+ * em2820_config_i2c()
+ * configure i2c attached devices
+ */
+void em2820_config_i2c(struct em2820 *dev)
+{
+       struct v4l2_frequency f;
+       struct video_decoder_init em2820_vdi = {.data = NULL };
+
+
+       /* configure decoder */
+       em2820_i2c_call_clients(dev, DECODER_INIT, &em2820_vdi);
+       em2820_i2c_call_clients(dev, DECODER_SET_INPUT, &dev->ctl_input);
+/*     em2820_i2c_call_clients(dev,DECODER_SET_PICTURE, &dev->vpic); */
+/*     em2820_i2c_call_clients(dev,DECODER_SET_NORM,&dev->tvnorm->id); */
+/*     em2820_i2c_call_clients(dev,DECODER_ENABLE_OUTPUT,&output); */
+/*     em2820_i2c_call_clients(dev,DECODER_DUMP, NULL); */
+
+       /* configure tuner */
+       f.tuner = 0;
+       f.type = V4L2_TUNER_ANALOG_TV;
+       f.frequency = 9076;     /* FIXME:remove magic number */
+       dev->ctl_freq = f.frequency;
+       em2820_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, &f);
+
+       /* configure tda9887 */
+
+       em2820_i2c_call_clients(dev, TDA9887_SET_CONFIG, &dev->tda9887_conf);
+
+/*     em2820_i2c_call_clients(dev,VIDIOC_S_STD,&dev->tvnorm->id); */
+}
+
+/*
+ * em2820_empty_framequeues()
+ * prepare queues for incoming and outgoing frames
+ */
+static void em2820_empty_framequeues(struct em2820 *dev)
+{
+       u32 i;
+
+       INIT_LIST_HEAD(&dev->inqueue);
+       INIT_LIST_HEAD(&dev->outqueue);
+
+       for (i = 0; i < EM2820_NUM_FRAMES; i++) {
+               dev->frame[i].state = F_UNUSED;
+               dev->frame[i].buf.bytesused = 0;
+       }
+}
+
+/*
+ * em2820_v4l2_open()
+ * inits the device and starts isoc transfer
+ */
+static int em2820_v4l2_open(struct inode *inode, struct file *filp)
+{
+       struct video_device *vdev = video_devdata(filp);
+       int minor = iminor(inode);
+       struct em2820 *dev = (struct em2820 *)video_get_drvdata(vdev);
+       int errCode = 0;
+
+       em2820_videodbg("users=%d", dev->users);
+
+       if (!down_read_trylock(&em2820_disconnect))
+               return -ERESTARTSYS;
+
+       if (dev->users) {
+               em2820_warn("this driver can be opened only once\n");
+               up_read(&em2820_disconnect);
+               return -EBUSY;
+       }
+
+/*     if(dev->vbi_dev->minor == minor){
+               dev->type=V4L2_BUF_TYPE_VBI_CAPTURE;
+       }*/
+       if (dev->vdev->minor == minor) {
+               dev->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+       }
+
+       init_MUTEX(&dev->fileop_lock);  /* to 1 == available */
+       spin_lock_init(&dev->queue_lock);
+       init_waitqueue_head(&dev->wait_frame);
+       init_waitqueue_head(&dev->wait_stream);
+
+       down(&dev->lock);
+
+       em2820_set_alternate(dev);
+
+       dev->width = norm_maxw(dev);
+       dev->height = norm_maxh(dev);
+       dev->frame_size = dev->width * dev->height * 2;
+       dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */
+       dev->bytesperline = dev->width * 2;
+       dev->hscale = 0;
+       dev->vscale = 0;
+
+       em2820_capture_start(dev, 1);
+       em2820_resolution_set(dev);
+
+       /* start the transfer */
+       errCode = em2820_init_isoc(dev);
+       if (errCode)
+               goto err;
+
+       dev->users++;
+       filp->private_data = dev;
+       dev->io = IO_NONE;
+       dev->stream = STREAM_OFF;
+       dev->num_frames = 0;
+
+       /* prepare queues */
+       em2820_empty_framequeues(dev);
+
+       dev->state |= DEV_INITIALIZED;
+
+      err:
+       up(&dev->lock);
+       up_read(&em2820_disconnect);
+       return errCode;
+}
+
+/*
+ * em2820_realease_resources()
+ * unregisters the v4l2,i2c and usb devices
+ * called when the device gets disconected or at module unload
+*/
+static void em2820_release_resources(struct em2820 *dev)
+{
+       down(&em2820_sysfs_lock);
+
+       em2820_info("V4L2 device /dev/video%d deregistered\n",
+                   dev->vdev->minor);
+       video_set_drvdata(dev->vdev, NULL);
+       video_unregister_device(dev->vdev);
+/*     video_unregister_device(dev->vbi_dev); */
+       em2820_i2c_unregister(dev);
+       usb_put_dev(dev->udev);
+       up(&em2820_sysfs_lock);
+}
+
+/*
+ * em2820_v4l2_close()
+ * stops streaming and deallocates all resources allocated by the v4l2 calls and ioctls
+ */
+static int em2820_v4l2_close(struct inode *inode, struct file *file)
+{
+       struct video_device *vdev = video_devdata(file);
+       struct em2820 *dev = (struct em2820 *)video_get_drvdata(vdev);
+       int errCode;
+
+       em2820_videodbg("users=%d", dev->users);
+
+       down(&dev->lock);
+
+       em2820_uninit_isoc(dev);
+
+       em2820_release_buffers(dev);
+
+       /* the device is already disconnect, free the remaining resources */
+       if (dev->state & DEV_DISCONNECTED) {
+               em2820_release_resources(dev);
+               up(&dev->lock);
+               kfree(dev);
+               return 0;
+       }
+
+       /* set alternate 0 */
+       dev->alt = 0;
+       em2820_videodbg("setting alternate 0");
+       errCode = usb_set_interface(dev->udev, 0, 0);
+       if (errCode < 0) {
+               em2820_errdev ("cannot change alternate number to 0 (error=%i)\n",
+                    errCode);
+       }
+
+       dev->users--;
+       wake_up_interruptible_nr(&dev->open, 1);
+       up(&dev->lock);
+       return 0;
+}
+
+/*
+ * em2820_v4l2_read()
+ * will allocate buffers when called for the first time
+ */
+static ssize_t
+em2820_v4l2_read(struct file *filp, char __user * buf, size_t count,
+                loff_t * f_pos)
+{
+       struct em2820 *dev = video_get_drvdata(video_devdata(filp));
+       struct em2820_frame_t *f, *i;
+       unsigned long lock_flags;
+       int ret = 0;
+
+       if (down_interruptible(&dev->fileop_lock))
+               return -ERESTARTSYS;
+
+       if (dev->state & DEV_DISCONNECTED) {
+               em2820_videodbg("device not present");
+               up(&dev->fileop_lock);
+               return -ENODEV;
+       }
+
+       if (dev->state & DEV_MISCONFIGURED) {
+               em2820_videodbg("device misconfigured; close and open it again");
+               up(&dev->fileop_lock);
+               return -EIO;
+       }
+
+       if (dev->io == IO_MMAP) {
+               em2820_videodbg ("IO method is set to mmap; close and open"
+                               " the device again to choose the read method");
+               up(&dev->fileop_lock);
+               return -EINVAL;
+       }
+
+       if (dev->io == IO_NONE) {
+               if (!em2820_request_buffers(dev, EM2820_NUM_READ_FRAMES)) {
+                       em2820_errdev("read failed, not enough memory\n");
+                       up(&dev->fileop_lock);
+                       return -ENOMEM;
+               }
+               dev->io = IO_READ;
+               dev->stream = STREAM_ON;
+               em2820_queue_unusedframes(dev);
+       }
+
+       if (!count) {
+               up(&dev->fileop_lock);
+               return 0;
+       }
+
+       if (list_empty(&dev->outqueue)) {
+               if (filp->f_flags & O_NONBLOCK) {
+                       up(&dev->fileop_lock);
+                       return -EAGAIN;
+               }
+               ret = wait_event_interruptible
+                   (dev->wait_frame,
+                    (!list_empty(&dev->outqueue)) ||
+                    (dev->state & DEV_DISCONNECTED));
+               if (ret) {
+                       up(&dev->fileop_lock);
+                       return ret;
+               }
+               if (dev->state & DEV_DISCONNECTED) {
+                       up(&dev->fileop_lock);
+                       return -ENODEV;
+               }
+       }
+
+       f = list_entry(dev->outqueue.prev, struct em2820_frame_t, frame);
+
+       spin_lock_irqsave(&dev->queue_lock, lock_flags);
+       list_for_each_entry(i, &dev->outqueue, frame)
+           i->state = F_UNUSED;
+       INIT_LIST_HEAD(&dev->outqueue);
+       spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
+
+       em2820_queue_unusedframes(dev);
+
+       if (count > f->buf.length)
+               count = f->buf.length;
+
+       if (copy_to_user(buf, f->bufmem, count)) {
+               up(&dev->fileop_lock);
+               return -EFAULT;
+       }
+       *f_pos += count;
+
+       up(&dev->fileop_lock);
+
+       return count;
+}
+
+/*
+ * em2820_v4l2_poll()
+ * will allocate buffers when called for the first time
+ */
+static unsigned int em2820_v4l2_poll(struct file *filp, poll_table * wait)
+{
+       struct em2820 *dev = video_get_drvdata(video_devdata(filp));
+       unsigned int mask = 0;
+
+       if (down_interruptible(&dev->fileop_lock))
+               return POLLERR;
+
+       if (dev->state & DEV_DISCONNECTED) {
+               em2820_videodbg("device not present");
+       } else if (dev->state & DEV_MISCONFIGURED) {
+               em2820_videodbg("device is misconfigured; close and open it again");
+       } else {
+               if (dev->io == IO_NONE) {
+                       if (!em2820_request_buffers
+                           (dev, EM2820_NUM_READ_FRAMES)) {
+                               em2820_warn
+                                   ("poll() failed, not enough memory\n");
+                       } else {
+                               dev->io = IO_READ;
+                               dev->stream = STREAM_ON;
+                       }
+               }
+
+               if (dev->io == IO_READ) {
+                       em2820_queue_unusedframes(dev);
+                       poll_wait(filp, &dev->wait_frame, wait);
+
+                       if (!list_empty(&dev->outqueue))
+                               mask |= POLLIN | POLLRDNORM;
+
+                       up(&dev->fileop_lock);
+
+                       return mask;
+               }
+       }
+
+       up(&dev->fileop_lock);
+       return POLLERR;
+}
+
+/*
+ * em2820_vm_open()
+ */
+static void em2820_vm_open(struct vm_area_struct *vma)
+{
+       struct em2820_frame_t *f = vma->vm_private_data;
+       f->vma_use_count++;
+}
+
+/*
+ * em2820_vm_close()
+ */
+static void em2820_vm_close(struct vm_area_struct *vma)
+{
+       /* NOTE: buffers are not freed here */
+       struct em2820_frame_t *f = vma->vm_private_data;
+       f->vma_use_count--;
+}
+
+static struct vm_operations_struct em2820_vm_ops = {
+       .open = em2820_vm_open,
+       .close = em2820_vm_close,
+};
+
+/*
+ * em2820_v4l2_mmap()
+ */
+static int em2820_v4l2_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+       struct em2820 *dev = video_get_drvdata(video_devdata(filp));
+       unsigned long size = vma->vm_end - vma->vm_start,
+           start = vma->vm_start, pos, page;
+       u32 i;
+       if (down_interruptible(&dev->fileop_lock))
+               return -ERESTARTSYS;
+
+       if (dev->state & DEV_DISCONNECTED) {
+               em2820_videodbg("mmap: device not present");
+               up(&dev->fileop_lock);
+               return -ENODEV;
+       }
+
+       if (dev->state & DEV_MISCONFIGURED) {
+               em2820_videodbg ("mmap: Device is misconfigured; close and "
+                                               "open it again");
+               up(&dev->fileop_lock);
+               return -EIO;
+       }
+
+       if (dev->io != IO_MMAP || !(vma->vm_flags & VM_WRITE) ||
+           size != PAGE_ALIGN(dev->frame[0].buf.length)) {
+               up(&dev->fileop_lock);
+               return -EINVAL;
+       }
+
+       for (i = 0; i < dev->num_frames; i++) {
+               if ((dev->frame[i].buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+                       break;
+       }
+       if (i == dev->num_frames) {
+               em2820_videodbg("mmap: user supplied mapping address is out of range");
+               up(&dev->fileop_lock);
+               return -EINVAL;
+       }
+
+       /* VM_IO is eventually going to replace PageReserved altogether */
+       vma->vm_flags |= VM_IO;
+       vma->vm_flags |= VM_RESERVED;   /* avoid to swap out this VMA */
+
+       pos = (unsigned long)dev->frame[i].bufmem;
+       while (size > 0) {      /* size is page-aligned */
+               page = vmalloc_to_pfn((void *)pos);
+               if (remap_pfn_range(vma, start, page, PAGE_SIZE,
+                                   vma->vm_page_prot)) {
+                       em2820_videodbg("mmap: rename page map failed");
+                       up(&dev->fileop_lock);
+                       return -EAGAIN;
+               }
+               start += PAGE_SIZE;
+               pos += PAGE_SIZE;
+               size -= PAGE_SIZE;
+       }
+
+       vma->vm_ops = &em2820_vm_ops;
+       vma->vm_private_data = &dev->frame[i];
+
+       em2820_vm_open(vma);
+       up(&dev->fileop_lock);
+       return 0;
+}
+
+/*
+ * em2820_get_ctrl()
+ * return the current saturation, brightness or contrast, mute state
+ */
+static int em2820_get_ctrl(struct em2820 *dev, struct v4l2_control *ctrl)
+{
+       s32 tmp;
+       switch (ctrl->id) {
+       case V4L2_CID_AUDIO_MUTE:
+               ctrl->value = dev->mute;
+               return 0;
+       case V4L2_CID_AUDIO_VOLUME:
+               ctrl->value = dev->volume;
+               return 0;
+       case V4L2_CID_BRIGHTNESS:
+               if ((tmp = em2820_brightness_get(dev)) < 0)
+                       return -EIO;
+               ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
+               return 0;
+       case V4L2_CID_CONTRAST:
+               if ((ctrl->value = em2820_contrast_get(dev)) < 0)
+                       return -EIO;
+               return 0;
+       case V4L2_CID_SATURATION:
+               if ((ctrl->value = em2820_saturation_get(dev)) < 0)
+                       return -EIO;
+               return 0;
+       case V4L2_CID_RED_BALANCE:
+               if ((tmp = em2820_v_balance_get(dev)) < 0)
+                       return -EIO;
+               ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
+               return 0;
+       case V4L2_CID_BLUE_BALANCE:
+               if ((tmp = em2820_u_balance_get(dev)) < 0)
+                       return -EIO;
+               ctrl->value = (s32) ((s8) tmp); /* FIXME: clenaer way to extend sign? */
+               return 0;
+       case V4L2_CID_GAMMA:
+               if ((ctrl->value = em2820_gamma_get(dev)) < 0)
+                       return -EIO;
+               return 0;
+       default:
+               return -EINVAL;
+       }
+}
+
+/*
+ * em2820_set_ctrl()
+ * mute or set new saturation, brightness or contrast
+ */
+static int em2820_set_ctrl(struct em2820 *dev, const struct v4l2_control *ctrl)
+{
+       switch (ctrl->id) {
+       case V4L2_CID_AUDIO_MUTE:
+               if (ctrl->value != dev->mute) {
+                       dev->mute = ctrl->value;
+                       em2820_audio_usb_mute(dev, ctrl->value);
+                       return em2820_audio_analog_set(dev);
+               }
+               return 0;
+       case V4L2_CID_AUDIO_VOLUME:
+               dev->volume = ctrl->value;
+               return em2820_audio_analog_set(dev);
+       case V4L2_CID_BRIGHTNESS:
+               return em2820_brightness_set(dev, ctrl->value);
+       case V4L2_CID_CONTRAST:
+               return em2820_contrast_set(dev, ctrl->value);
+       case V4L2_CID_SATURATION:
+               return em2820_saturation_set(dev, ctrl->value);
+       case V4L2_CID_RED_BALANCE:
+               return em2820_v_balance_set(dev, ctrl->value);
+       case V4L2_CID_BLUE_BALANCE:
+               return em2820_u_balance_set(dev, ctrl->value);
+       case V4L2_CID_GAMMA:
+               return em2820_gamma_set(dev, ctrl->value);
+       default:
+               return -EINVAL;
+       }
+}
+
+/*
+ * em2820_stream_interrupt()
+ * stops streaming
+ */
+static int em2820_stream_interrupt(struct em2820 *dev)
+{
+       int ret = 0;
+
+       /* stop reading from the device */
+
+       dev->stream = STREAM_INTERRUPT;
+       ret = wait_event_timeout(dev->wait_stream,
+                                (dev->stream == STREAM_OFF) ||
+                                (dev->state & DEV_DISCONNECTED),
+                                EM2820_URB_TIMEOUT);
+       if (dev->state & DEV_DISCONNECTED)
+               return -ENODEV;
+       else if (ret) {
+               dev->state |= DEV_MISCONFIGURED;
+               em2820_videodbg("device is misconfigured; close and "
+                       "open /dev/video%d again", dev->vdev->minor);
+               return ret;
+       }
+
+       return 0;
+}
+
+static int em2820_set_norm(struct em2820 *dev, int width, int height)
+{
+       unsigned int hscale, vscale;
+       unsigned int maxh, maxw;
+
+       maxw = norm_maxw(dev);
+       maxh = norm_maxh(dev);
+
+       /* width must even because of the YUYV format */
+       /* height must be even because of interlacing */
+       height &= 0xfffe;
+       width &= 0xfffe;
+
+       if (height < 32)
+               height = 32;
+       if (height > maxh)
+               height = maxh;
+       if (width < 48)
+               width = 48;
+       if (width > maxw)
+               width = maxw;
+
+       if ((hscale = (((unsigned long)maxw) << 12) / width - 4096L) >= 0x4000)
+               hscale = 0x3fff;
+       width = (((unsigned long)maxw) << 12) / (hscale + 4096L);
+
+       if ((vscale = (((unsigned long)maxh) << 12) / height - 4096L) >= 0x4000)
+               vscale = 0x3fff;
+       height = (((unsigned long)maxh) << 12) / (vscale + 4096L);
+
+       /* set new image size */
+       dev->width = width;
+       dev->height = height;
+       dev->frame_size = dev->width * dev->height * 2;
+       dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */
+       dev->bytesperline = dev->width * 2;
+       dev->hscale = hscale;
+       dev->vscale = vscale;
+
+       em2820_resolution_set(dev);
+
+       return 0;
+}
+
+static void video_mux(struct em2820 *dev, int index)
+{
+       int input, ainput;
+
+       input = INPUT(index)->vmux;
+       dev->ctl_input = index;
+
+       em2820_i2c_call_clients(dev, DECODER_SET_INPUT, &input);
+
+       dev->ctl_ainput = INPUT(index)->amux;
+
+       switch (dev->ctl_ainput) {
+       case 0:
+               ainput = EM2820_AUDIO_SRC_TUNER;
+               break;
+       default:
+               ainput = EM2820_AUDIO_SRC_LINE;
+       }
+
+       em2820_audio_source(dev, ainput);
+}
+
+/*
+ * em2820_v4l2_do_ioctl()
+ * This function is _not_ called directly, but from
+ * em2820_v4l2_ioctl. Userspace
+ * copying is done already, arg is a kernel pointer.
+ */
+static int em2820_do_ioctl(struct inode *inode, struct file *filp,
+                          struct em2820 *dev, unsigned int cmd, void *arg,
+                          v4l2_kioctl driver_ioctl)
+{
+       int ret;
+
+       switch (cmd) {
+               /* ---------- tv norms ---------- */
+       case VIDIOC_ENUMSTD:
+               {
+                       struct v4l2_standard *e = arg;
+                       unsigned int i;
+
+                       i = e->index;
+                       if (i >= TVNORMS)
+                               return -EINVAL;
+                       ret = v4l2_video_std_construct(e, tvnorms[e->index].id,
+                                                      tvnorms[e->index].name);
+                       e->index = i;
+                       if (ret < 0)
+                               return ret;
+                       return 0;
+               }
+       case VIDIOC_G_STD:
+               {
+                       v4l2_std_id *id = arg;
+
+                       *id = dev->tvnorm->id;
+                       return 0;
+               }
+       case VIDIOC_S_STD:
+               {
+                       v4l2_std_id *id = arg;
+                       unsigned int i;
+
+                       for (i = 0; i < TVNORMS; i++)
+                               if (*id == tvnorms[i].id)
+                                       break;
+                       if (i == TVNORMS)
+                               for (i = 0; i < TVNORMS; i++)
+                                       if (*id & tvnorms[i].id)
+                                               break;
+                       if (i == TVNORMS)
+                               return -EINVAL;
+
+                       down(&dev->lock);
+                       dev->tvnorm = &tvnorms[i];
+
+                       em2820_set_norm(dev, dev->width, dev->height);
+
+/*
+               dev->width=norm_maxw(dev);
+               dev->height=norm_maxh(dev);
+               dev->frame_size=dev->width*dev->height*2;
+               dev->field_size=dev->frame_size>>1;
+               dev->bytesperline=dev->width*2;
+               dev->hscale=0;
+               dev->vscale=0;
+
+               em2820_resolution_set(dev);
+*/
+/*
+               em2820_uninit_isoc(dev);
+               em2820_set_alternate(dev);
+               em2820_capture_start(dev, 1);
+               em2820_resolution_set(dev);
+               em2820_init_isoc(dev);
+*/
+                       em2820_i2c_call_clients(dev, DECODER_SET_NORM,
+                                               &tvnorms[i].mode);
+                       em2820_i2c_call_clients(dev, VIDIOC_S_STD,
+                                               &dev->tvnorm->id);
+
+                       up(&dev->lock);
+
+                       return 0;
+               }
+
+               /* ------ input switching ---------- */
+       case VIDIOC_ENUMINPUT:
+               {
+                       struct v4l2_input *i = arg;
+                       unsigned int n;
+                       static const char *iname[] = {
+                               [EM2820_VMUX_COMPOSITE1] = "Composite1",
+                               [EM2820_VMUX_COMPOSITE2] = "Composite2",
+                               [EM2820_VMUX_COMPOSITE3] = "Composite3",
+                               [EM2820_VMUX_COMPOSITE4] = "Composite4",
+                               [EM2820_VMUX_SVIDEO] = "S-Video",
+                               [EM2820_VMUX_TELEVISION] = "Television",
+                               [EM2820_VMUX_CABLE] = "Cable TV",
+                               [EM2820_VMUX_DVB] = "DVB",
+                               [EM2820_VMUX_DEBUG] = "for debug only",
+                       };
+
+                       n = i->index;
+                       if (n >= MAX_EM2820_INPUT)
+                               return -EINVAL;
+                       if (0 == INPUT(n)->type)
+                               return -EINVAL;
+                       memset(i, 0, sizeof(*i));
+                       i->index = n;
+                       i->type = V4L2_INPUT_TYPE_CAMERA;
+                       strcpy(i->name, iname[INPUT(n)->type]);
+                       if ((EM2820_VMUX_TELEVISION == INPUT(n)->type) ||
+                           (EM2820_VMUX_CABLE == INPUT(n)->type))
+                               i->type = V4L2_INPUT_TYPE_TUNER;
+                       for (n = 0; n < ARRAY_SIZE(tvnorms); n++)
+                               i->std |= tvnorms[n].id;
+                       return 0;
+               }
+
+       case VIDIOC_G_INPUT:
+               {
+                       int *i = arg;
+                       *i = dev->ctl_input;
+
+                       return 0;
+               }
+
+       case VIDIOC_S_INPUT:
+               {
+                       int *index = arg;
+
+                       if (*index >= MAX_EM2820_INPUT)
+                               return -EINVAL;
+                       if (0 == INPUT(*index)->type)
+                               return -EINVAL;
+
+                       down(&dev->lock);
+                       video_mux(dev, *index);
+                       up(&dev->lock);
+
+                       return 0;
+               }
+
+       case VIDIOC_G_AUDIO:
+               {
+                       struct v4l2_audio *a = arg;
+                       unsigned int index = a->index;
+
+                       if (a->index > 1)
+                               return -EINVAL;
+                       memset(a, 0, sizeof(*a));
+                       index = dev->ctl_ainput;
+
+                       if (index == 0) {
+                               strcpy(a->name, "Television");
+                       } else {
+                               strcpy(a->name, "Line In");
+                       }
+                       a->capability = V4L2_AUDCAP_STEREO;
+                       a->index = index;
+                       return 0;
+               }
+
+       case VIDIOC_S_AUDIO:
+               {
+                       struct v4l2_audio *a = arg;
+                       if (a->index != dev->ctl_ainput)
+                               return -EINVAL;
+
+                       return 0;
+               }
+
+               /* --- controls ---------------------------------------------- */
+       case VIDIOC_QUERYCTRL:
+               {
+                       struct v4l2_queryctrl *qc = arg;
+                       u8 i, n;
+                       n = sizeof(em2820_qctrl) / sizeof(em2820_qctrl[0]);
+                       for (i = 0; i < n; i++)
+                               if (qc->id && qc->id == em2820_qctrl[i].id) {
+                                       memcpy(qc, &(em2820_qctrl[i]),
+                                              sizeof(*qc));
+                                       return 0;
+                               }
+
+                       return -EINVAL;
+               }
+
+       case VIDIOC_G_CTRL:
+               {
+                       struct v4l2_control *ctrl = arg;
+
+
+                       return em2820_get_ctrl(dev, ctrl);
+               }
+
+       case VIDIOC_S_CTRL_OLD: /* ??? */
+       case VIDIOC_S_CTRL:
+               {
+                       struct v4l2_control *ctrl = arg;
+                       u8 i, n;
+
+
+                       n = sizeof(em2820_qctrl) / sizeof(em2820_qctrl[0]);
+                       for (i = 0; i < n; i++)
+                               if (ctrl->id == em2820_qctrl[i].id) {
+                                       if (ctrl->value <
+                                           em2820_qctrl[i].minimum
+                                           || ctrl->value >
+                                           em2820_qctrl[i].maximum)
+                                               return -ERANGE;
+
+                                       return em2820_set_ctrl(dev, ctrl);
+                               }
+                       return -EINVAL;
+               }
+
+               /* --- tuner ioctls ------------------------------------------ */
+       case VIDIOC_G_TUNER:
+               {
+                       struct v4l2_tuner *t = arg;
+                       int status = 0;
+
+                       if (0 != t->index)
+                               return -EINVAL;
+
+                       memset(t, 0, sizeof(*t));
+                       strcpy(t->name, "Tuner");
+                       t->type = V4L2_TUNER_ANALOG_TV;
+                       t->capability = V4L2_TUNER_CAP_NORM;
+                       t->rangehigh = 0xffffffffUL;    /* FIXME: set correct range */
+/*             t->signal = 0xffff;*/
+/*             em2820_i2c_call_clients(dev,VIDIOC_G_TUNER,t);*/
+                       /* No way to get signal strength? */
+                       down(&dev->lock);
+                       em2820_i2c_call_clients(dev, DECODER_GET_STATUS,
+                                               &status);
+                       up(&dev->lock);
+                       t->signal =
+                           (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
+
+                       em2820_videodbg("VIDIO_G_TUNER: signal=%x, afc=%x", t->signal,
+                                t->afc);
+                       return 0;
+               }
+       case VIDIOC_S_TUNER:
+               {
+                       struct v4l2_tuner *t = arg;
+                       int status = 0;
+
+                       if (0 != t->index)
+                               return -EINVAL;
+                       memset(t, 0, sizeof(*t));
+                       strcpy(t->name, "Tuner");
+                       t->type = V4L2_TUNER_ANALOG_TV;
+                       t->capability = V4L2_TUNER_CAP_NORM;
+                       t->rangehigh = 0xffffffffUL;    /* FIXME: set correct range */
+/*             t->signal = 0xffff; */
+                       /* No way to get signal strength? */
+                       down(&dev->lock);
+                       em2820_i2c_call_clients(dev, DECODER_GET_STATUS,
+                                               &status);
+                       up(&dev->lock);
+                       t->signal =
+                           (status & DECODER_STATUS_GOOD) != 0 ? 0xffff : 0;
+
+                       em2820_videodbg("VIDIO_S_TUNER: signal=%x, afc=%x\n",
+                                t->signal, t->afc);
+                       return 0;
+               }
+       case VIDIOC_G_FREQUENCY:
+               {
+                       struct v4l2_frequency *f = arg;
+
+                       memset(f, 0, sizeof(*f));
+                       f->type = V4L2_TUNER_ANALOG_TV;
+                       f->frequency = dev->ctl_freq;
+
+                       return 0;
+               }
+       case VIDIOC_S_FREQUENCY:
+               {
+                       struct v4l2_frequency *f = arg;
+
+                       if (0 != f->tuner)
+                               return -EINVAL;
+
+                       if (V4L2_TUNER_ANALOG_TV != f->type)
+                               return -EINVAL;
+
+                       down(&dev->lock);
+                       dev->ctl_freq = f->frequency;
+                       em2820_i2c_call_clients(dev, VIDIOC_S_FREQUENCY, f);
+                       up(&dev->lock);
+                       return 0;
+               }
+
+       case VIDIOC_CROPCAP:
+               {
+                       struct v4l2_cropcap *cc = arg;
+
+                       if (cc->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+                               return EINVAL;
+                       cc->bounds.left = 0;
+                       cc->bounds.top = 0;
+                       cc->bounds.width = dev->width;
+                       cc->bounds.height = dev->height;
+                       cc->defrect = cc->bounds;
+                       cc->pixelaspect.numerator = 54; /* 4:3 FIXME: remove magic numbers */
+                       cc->pixelaspect.denominator = 59;
+                       return 0;
+               }
+       case VIDIOC_STREAMON:
+               {
+                       int *type = arg;
+
+                       if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE
+                           || dev->io != IO_MMAP)
+                               return -EINVAL;
+
+                       if (list_empty(&dev->inqueue))
+                               return -EINVAL;
+
+                       dev->stream = STREAM_ON;        /* FIXME: Start video capture here? */
+
+                       em2820_videodbg("VIDIOC_STREAMON: starting stream");
+
+                       return 0;
+               }
+       case VIDIOC_STREAMOFF:
+               {
+                       int *type = arg;
+                       int ret;
+
+                       if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE
+                           || dev->io != IO_MMAP)
+                               return -EINVAL;
+
+                       if (dev->stream == STREAM_ON) {
+                               em2820_videodbg ("VIDIOC_STREAMOFF: interrupting stream");
+                               if ((ret = em2820_stream_interrupt(dev)))
+                                       return ret;
+                       }
+                       em2820_empty_framequeues(dev);
+
+                       return 0;
+               }
+       default:
+               return v4l_compat_translate_ioctl(inode, filp, cmd, arg,
+                                                 driver_ioctl);
+       }
+       return 0;
+}
+
+/*
+ * em2820_v4l2_do_ioctl()
+ * This function is _not_ called directly, but from
+ * em2820_v4l2_ioctl. Userspace
+ * copying is done already, arg is a kernel pointer.
+ */
+static int em2820_video_do_ioctl(struct inode *inode, struct file *filp,
+                                unsigned int cmd, void *arg)
+{
+       struct em2820 *dev = filp->private_data;
+
+       if (!dev)
+               return -ENODEV;
+
+       if (video_debug > 1)
+               em2820_print_ioctl(dev->name,cmd);
+
+       switch (cmd) {
+
+               /* --- capabilities ------------------------------------------ */
+       case VIDIOC_QUERYCAP:
+               {
+                       struct v4l2_capability *cap = arg;
+
+                       memset(cap, 0, sizeof(*cap));
+                       strlcpy(cap->driver, "em2820", sizeof(cap->driver));
+                       strlcpy(cap->card, em2820_boards[dev->model].name,
+                               sizeof(cap->card));
+                       strlcpy(cap->bus_info, dev->udev->dev.bus_id,
+                               sizeof(cap->bus_info));
+                       cap->version = EM2820_VERSION_CODE;
+                       cap->capabilities =
+                           V4L2_CAP_VIDEO_CAPTURE |
+                           V4L2_CAP_AUDIO |
+                           V4L2_CAP_READWRITE | V4L2_CAP_STREAMING;
+                       if (dev->has_tuner)
+                               cap->capabilities |= V4L2_CAP_TUNER;
+                       return 0;
+               }
+
+               /* --- capture ioctls ---------------------------------------- */
+       case VIDIOC_ENUM_FMT:
+               {
+                       struct v4l2_fmtdesc *fmtd = arg;
+
+                       if (fmtd->index != 0)
+                               return -EINVAL;
+                       memset(fmtd, 0, sizeof(*fmtd));
+                       fmtd->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+                       strcpy(fmtd->description, "Packed YUY2");
+                       fmtd->pixelformat = V4L2_PIX_FMT_YUYV;
+                       memset(fmtd->reserved, 0, sizeof(fmtd->reserved));
+                       return 0;
+               }
+
+       case VIDIOC_G_FMT:
+               {
+                       struct v4l2_format *format = arg;
+
+                       em2820_videodbg("VIDIOC_G_FMT: type=%s",
+                                format->type ==
+                                V4L2_BUF_TYPE_VIDEO_CAPTURE ?
+                                "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type ==
+                                V4L2_BUF_TYPE_VBI_CAPTURE ?
+                                "V4L2_BUF_TYPE_VBI_CAPTURE " :
+                                "not supported");
+
+                       if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+                               return -EINVAL;
+
+                       format->fmt.pix.width = dev->width;
+                       format->fmt.pix.height = dev->height;
+                       format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+                       format->fmt.pix.bytesperline = dev->bytesperline;
+                       format->fmt.pix.sizeimage = dev->frame_size;
+                       format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+                       format->fmt.pix.field = dev->interlaced ? V4L2_FIELD_INTERLACED : V4L2_FIELD_TOP;       /* FIXME: TOP? NONE? BOTTOM? ALTENATE? */
+
+                       em2820_videodbg("VIDIOC_G_FMT: %dx%d", dev->width,
+                                dev->height);
+                       return 0;
+               }
+
+       case VIDIOC_TRY_FMT:
+       case VIDIOC_S_FMT:
+               {
+                       struct v4l2_format *format = arg;
+                       u32 i;
+                       int ret = 0;
+                       int width = format->fmt.pix.width;
+                       int height = format->fmt.pix.height;
+                       unsigned int hscale, vscale;
+                       unsigned int maxh, maxw;
+
+                       maxw = norm_maxw(dev);
+                       maxh = norm_maxh(dev);
+
+/*             int both_fields; */
+
+                       em2820_videodbg("%s: type=%s",
+                                cmd ==
+                                VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
+                                "VIDIOC_S_FMT",
+                                format->type ==
+                                V4L2_BUF_TYPE_VIDEO_CAPTURE ?
+                                "V4L2_BUF_TYPE_VIDEO_CAPTURE" : format->type ==
+                                V4L2_BUF_TYPE_VBI_CAPTURE ?
+                                "V4L2_BUF_TYPE_VBI_CAPTURE " :
+                                "not supported");
+
+                       if (format->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
+                               return -EINVAL;
+
+                       em2820_videodbg("%s: requested %dx%d",
+                                cmd ==
+                                VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
+                                "VIDIOC_S_FMT", format->fmt.pix.width,
+                                format->fmt.pix.height);
+
+                       /* FIXME: Move some code away from here */
+                       /* width must even because of the YUYV format */
+                       /* height must be even because of interlacing */
+                       height &= 0xfffe;
+                       width &= 0xfffe;
+
+                       if (height < 32)
+                               height = 32;
+                       if (height > maxh)
+                               height = maxh;
+                       if (width < 48)
+                               width = 48;
+                       if (width > maxw)
+                               width = maxw;
+
+                       if ((hscale =
+                            (((unsigned long)maxw) << 12) / width - 4096L) >=
+                           0x4000)
+                               hscale = 0x3fff;
+                       width =
+                           (((unsigned long)maxw) << 12) / (hscale + 4096L);
+
+                       if ((vscale =
+                            (((unsigned long)maxh) << 12) / height - 4096L) >=
+                           0x4000)
+                               vscale = 0x3fff;
+                       height =
+                           (((unsigned long)maxh) << 12) / (vscale + 4096L);
+
+                       format->fmt.pix.width = width;
+                       format->fmt.pix.height = height;
+                       format->fmt.pix.pixelformat = V4L2_PIX_FMT_YUYV;
+                       format->fmt.pix.bytesperline = width * 2;
+                       format->fmt.pix.sizeimage = width * 2 * height;
+                       format->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
+                       format->fmt.pix.field = V4L2_FIELD_INTERLACED;
+
+                       em2820_videodbg("%s: returned %dx%d (%d, %d)",
+                                cmd ==
+                                VIDIOC_TRY_FMT ? "VIDIOC_TRY_FMT" :
+                                "VIDIOC_S_FMT", format->fmt.pix.width,
+                                format->fmt.pix.height, hscale, vscale);
+
+                       if (cmd == VIDIOC_TRY_FMT)
+                               return 0;
+
+                       for (i = 0; i < dev->num_frames; i++)
+                               if (dev->frame[i].vma_use_count) {
+                                       em2820_videodbg("VIDIOC_S_FMT failed. "
+                                               "Unmap the buffers first.");
+                                       return -EINVAL;
+                               }
+
+                       /* stop io in case it is already in progress */
+                       if (dev->stream == STREAM_ON) {
+                               em2820_videodbg("VIDIOC_SET_FMT: interupting stream");
+                               if ((ret = em2820_stream_interrupt(dev)))
+                                       return ret;
+                       }
+
+                       em2820_release_buffers(dev);
+                       dev->io = IO_NONE;
+
+                       /* set new image size */
+                       dev->width = width;
+                       dev->height = height;
+                       dev->frame_size = dev->width * dev->height * 2;
+                       dev->field_size = dev->frame_size >> 1; /*both_fileds ? dev->frame_size>>1 : dev->frame_size; */
+                       dev->bytesperline = dev->width * 2;
+                       dev->hscale = hscale;
+                       dev->vscale = vscale;
+/*                     dev->both_fileds = both_fileds; */
+                       em2820_uninit_isoc(dev);
+                       em2820_set_alternate(dev);
+                       em2820_capture_start(dev, 1);
+                       em2820_resolution_set(dev);
+                       em2820_init_isoc(dev);
+
+                       return 0;
+               }
+
+               /* --- streaming capture ------------------------------------- */
+       case VIDIOC_REQBUFS:
+               {
+                       struct v4l2_requestbuffers *rb = arg;
+                       u32 i;
+                       int ret;
+
+                       if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+                           rb->memory != V4L2_MEMORY_MMAP)
+                               return -EINVAL;
+
+                       if (dev->io == IO_READ) {
+                               em2820_videodbg ("method is set to read;"
+                                       " close and open the device again to"
+                                       " choose the mmap I/O method");
+                               return -EINVAL;
+                       }
+
+                       for (i = 0; i < dev->num_frames; i++)
+                               if (dev->frame[i].vma_use_count) {
+                                       em2820_videodbg ("VIDIOC_REQBUFS failed; previous buffers are still mapped");
+                                       return -EINVAL;
+                               }
+
+                       if (dev->stream == STREAM_ON) {
+                               em2820_videodbg("VIDIOC_REQBUFS: interrupting stream");
+                               if ((ret = em2820_stream_interrupt(dev)))
+                                       return ret;
+                       }
+
+                       em2820_empty_framequeues(dev);
+
+                       em2820_release_buffers(dev);
+                       if (rb->count)
+                               rb->count =
+                                   em2820_request_buffers(dev, rb->count);
+
+                       dev->frame_current = NULL;
+
+                       em2820_videodbg ("VIDIOC_REQBUFS: setting io method to mmap: num bufs %i",
+                                                    rb->count);
+                       dev->io = rb->count ? IO_MMAP : IO_NONE;
+                       return 0;
+               }
+
+       case VIDIOC_QUERYBUF:
+               {
+                       struct v4l2_buffer *b = arg;
+
+                       if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+                           b->index >= dev->num_frames || dev->io != IO_MMAP)
+                               return -EINVAL;
+
+                       memcpy(b, &dev->frame[b->index].buf, sizeof(*b));
+
+                       if (dev->frame[b->index].vma_use_count) {
+                               b->flags |= V4L2_BUF_FLAG_MAPPED;
+                       }
+                       if (dev->frame[b->index].state == F_DONE)
+                               b->flags |= V4L2_BUF_FLAG_DONE;
+                       else if (dev->frame[b->index].state != F_UNUSED)
+                               b->flags |= V4L2_BUF_FLAG_QUEUED;
+                       return 0;
+               }
+       case VIDIOC_QBUF:
+               {
+                       struct v4l2_buffer *b = arg;
+                       unsigned long lock_flags;
+
+                       if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE ||
+                           b->index >= dev->num_frames || dev->io != IO_MMAP) {
+                               return -EINVAL;
+                       }
+
+                       if (dev->frame[b->index].state != F_UNUSED) {
+                               return -EAGAIN;
+                       }
+                       dev->frame[b->index].state = F_QUEUED;
+
+                       /* add frame to fifo */
+                       spin_lock_irqsave(&dev->queue_lock, lock_flags);
+                       list_add_tail(&dev->frame[b->index].frame,
+                                     &dev->inqueue);
+                       spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
+
+                       return 0;
+               }
+       case VIDIOC_DQBUF:
+               {
+                       struct v4l2_buffer *b = arg;
+                       struct em2820_frame_t *f;
+                       unsigned long lock_flags;
+                       int ret = 0;
+
+                       if (b->type != V4L2_BUF_TYPE_VIDEO_CAPTURE
+                           || dev->io != IO_MMAP)
+                               return -EINVAL;
+
+                       if (list_empty(&dev->outqueue)) {
+                               if (dev->stream == STREAM_OFF)
+                                       return -EINVAL;
+                               if (filp->f_flags & O_NONBLOCK)
+                                       return -EAGAIN;
+                               ret = wait_event_interruptible
+                                   (dev->wait_frame,
+                                    (!list_empty(&dev->outqueue)) ||
+                                    (dev->state & DEV_DISCONNECTED));
+                               if (ret)
+                                       return ret;
+                               if (dev->state & DEV_DISCONNECTED)
+                                       return -ENODEV;
+                       }
+
+                       spin_lock_irqsave(&dev->queue_lock, lock_flags);
+                       f = list_entry(dev->outqueue.next,
+                                      struct em2820_frame_t, frame);
+                       list_del(dev->outqueue.next);
+                       spin_unlock_irqrestore(&dev->queue_lock, lock_flags);
+
+                       f->state = F_UNUSED;
+                       memcpy(b, &f->buf, sizeof(*b));
+
+                       if (f->vma_use_count)
+                               b->flags |= V4L2_BUF_FLAG_MAPPED;
+
+                       return 0;
+               }
+       default:
+               return em2820_do_ioctl(inode, filp, dev, cmd, arg,
+                                      em2820_video_do_ioctl);
+       }
+       return 0;
+}
+
+/*
+ * em2820_v4l2_ioctl()
+ * handle v4l2 ioctl the main action happens in em2820_v4l2_do_ioctl()
+ */
+static int em2820_v4l2_ioctl(struct inode *inode, struct file *filp,
+                            unsigned int cmd, unsigned long arg)
+{
+       struct em2820 *dev = video_get_drvdata(video_devdata(filp));
+       int ret = 0;
+
+       if (down_interruptible(&dev->fileop_lock))
+               return -ERESTARTSYS;
+
+       if (dev->state & DEV_DISCONNECTED) {
+               em2820_errdev("v4l2 ioctl: device not present\n");
+               up(&dev->fileop_lock);
+               return -ENODEV;
+       }
+
+       if (dev->state & DEV_MISCONFIGURED) {
+               em2820_errdev
+                   ("v4l2 ioctl: device is misconfigured; close and open it again\n");
+               up(&dev->fileop_lock);
+               return -EIO;
+       }
+
+       ret = video_usercopy(inode, filp, cmd, arg, em2820_video_do_ioctl);
+
+       up(&dev->fileop_lock);
+
+       return ret;
+}
+
+static struct file_operations em2820_v4l_fops = {
+       .owner = THIS_MODULE,
+       .open = em2820_v4l2_open,
+       .release = em2820_v4l2_close,
+       .ioctl = em2820_v4l2_ioctl,
+       .read = em2820_v4l2_read,
+       .poll = em2820_v4l2_poll,
+       .mmap = em2820_v4l2_mmap,
+       .llseek = no_llseek,
+};
+
+/******************************** usb interface *****************************************/
+
+/*
+ * em2820_init_dev()
+ * allocates and inits the device structs, registers i2c bus and v4l device
+ */
+static int em2820_init_dev(struct em2820 **devhandle, struct usb_device *udev,
+                          int minor, int model)
+{
+       struct em2820 *dev;
+       int retval = -ENOMEM;
+       int errCode, i;
+       unsigned int maxh, maxw;
+       struct usb_interface *uif;
+
+       /* allocate memory for our device state and initialize it */
+       dev = kmalloc(sizeof(*dev), GFP_KERNEL);
+       if (dev == NULL) {
+               em2820_err(DRIVER_NAME ": out of memory!\n");
+               return -ENOMEM;
+       }
+       memset(dev, 0x00, sizeof(*dev));
+
+       snprintf(dev->name, 29, "em2820 #%d", minor);
+       dev->udev = udev;
+       dev->model = model;
+       init_MUTEX(&dev->lock);
+       init_waitqueue_head(&dev->open);
+
+       dev->em2820_write_regs = em2820_write_regs;
+       dev->em2820_read_reg = em2820_read_reg;
+       dev->em2820_read_reg_req_len = em2820_read_reg_req_len;
+       dev->em2820_write_regs_req = em2820_write_regs_req;
+       dev->em2820_read_reg_req = em2820_read_reg_req;
+       dev->has_tuner = em2820_boards[model].has_tuner;
+       dev->has_msp34xx = em2820_boards[model].has_msp34xx;
+       dev->tda9887_conf = em2820_boards[model].tda9887_conf;
+       dev->decoder = em2820_boards[model].decoder;
+
+       if (tuner >= 0)
+               dev->tuner_type = tuner;
+       else
+               dev->tuner_type = em2820_boards[model].tuner_type;
+
+       dev->video_inputs = em2820_boards[model].vchannels;
+
+       for (i = 0; i < TVNORMS; i++)
+               if (em2820_boards[model].norm == tvnorms[i].mode)
+                       break;
+       if (i == TVNORMS)
+               i = 0;
+
+       dev->tvnorm = &tvnorms[i];      /* set default norm */
+
+       em2820_videodbg("tvnorm=%s\n", dev->tvnorm->name);
+
+       maxw = norm_maxw(dev);
+       maxh = norm_maxh(dev);
+
+       /* set default image size */
+       dev->width = maxw;
+       dev->height = maxh;
+       dev->interlaced = EM2820_INTERLACED_DEFAULT;
+       dev->field_size = dev->width * dev->height;
+       dev->frame_size =
+           dev->interlaced ? dev->field_size << 1 : dev->field_size;
+       dev->bytesperline = dev->width * 2;
+       dev->hscale = 0;
+       dev->vscale = 0;
+       dev->ctl_input = 2;
+
+       /* setup video picture settings for saa7113h */
+       memset(&dev->vpic, 0, sizeof(dev->vpic));
+       dev->vpic.colour = 128 << 8;
+       dev->vpic.hue = 128 << 8;
+       dev->vpic.brightness = 128 << 8;
+       dev->vpic.contrast = 192 << 8;
+       dev->vpic.whiteness = 128 << 8; /* This one isn't used */
+       dev->vpic.depth = 16;
+       dev->vpic.palette = VIDEO_PALETTE_YUV422;
+
+       /* compute alternate max packet sizes */
+       uif = dev->udev->actconfig->interface[0];
+       dev->alt_max_pkt_size[0] = 0;
+       for (i = 1; i <= EM2820_MAX_ALT; i++) {
+               u16 tmp =
+                   le16_to_cpu(uif->altsetting[i].endpoint[1].desc.
+                               wMaxPacketSize);
+               dev->alt_max_pkt_size[i] =
+                   (tmp & 0x07ff) * (((tmp & 0x1800) >> 11) + 1);
+       }
+
+#ifdef CONFIG_MODULES
+       /* request some modules */
+       if (dev->decoder == EM2820_SAA7113)
+               request_module("saa7113");
+       if (dev->decoder == EM2820_SAA7114)
+               request_module("saa7114");
+       if (dev->decoder == EM2820_TVP5150)
+               request_module("tvp5150");
+       if (dev->has_tuner)
+               request_module("tuner");
+       if (dev->tda9887_conf)
+               request_module("tda9887");
+#endif
+       errCode = em2820_config(dev);
+       if (errCode) {
+               em2820_errdev("error configuring device\n");
+               kfree(dev);
+               return -ENOMEM;
+       }
+
+       down(&dev->lock);
+       /* register i2c bus */
+       em2820_i2c_register(dev);
+
+       /* Do board specific init and eeprom reading */
+       em2820_card_setup(dev);
+
+       /* configure the device */
+       em2820_config_i2c(dev);
+
+       up(&dev->lock);
+
+       errCode = em2820_config(dev);
+
+#ifdef CONFIG_MODULES
+       if (dev->has_msp34xx)
+               request_module("msp3400");
+#endif
+       /* allocate and fill v4l2 device struct */
+       dev->vdev = video_device_alloc();
+       if (NULL == dev->vdev) {
+               em2820_errdev("cannot allocate video_device.\n");
+               kfree(dev);
+               return -ENOMEM;
+       }
+
+       dev->vdev->owner = THIS_MODULE;
+       dev->vdev->type = VID_TYPE_CAPTURE;
+       if (dev->has_tuner)
+               dev->vdev->type |= VID_TYPE_TUNER;
+       dev->vdev->hardware = 0;
+       dev->vdev->fops = &em2820_v4l_fops;
+       dev->vdev->minor = -1;
+       dev->vdev->dev = &dev->udev->dev;
+       dev->vdev->release = video_device_release;
+       snprintf(dev->vdev->name, sizeof(dev->vdev->name), "%s",
+                "em2820 video");
+       video_set_drvdata(dev->vdev, dev);
+
+       /* register v4l2 device */
+       down(&dev->lock);
+       if ((retval = video_register_device(dev->vdev, VFL_TYPE_GRABBER, -1))) {
+               em2820_errdev("unable to register video device (error=%i).\n",
+                             retval);
+               up(&dev->lock);
+               video_set_drvdata(dev->vdev, NULL);
+               video_device_release(dev->vdev);
+               kfree(dev);
+               return -ENODEV;
+       }
+       if (dev->has_msp34xx) {
+               /* Send a reset to other chips via gpio */
+               em2820_write_regs_req(dev, 0x00, 0x08, "\xf7", 1);
+               udelay(2500);
+               em2820_write_regs_req(dev, 0x00, 0x08, "\xff", 1);
+               udelay(2500);
+
+       }
+       video_mux(dev, 0);
+
+       up(&dev->lock);
+
+       em2820_info("V4L2 device registered as /dev/video%d\n",
+                   dev->vdev->minor);
+
+       *devhandle = dev;
+       return 0;
+}
+
+/*
+ * em2820_usb_probe()
+ * checks for supported devices
+ */
+static int em2820_usb_probe(struct usb_interface *interface,
+                           const struct usb_device_id *id)
+{
+       const struct usb_endpoint_descriptor *endpoint;
+       struct usb_device *udev;
+       struct em2820 *dev = NULL;
+       int retval = -ENODEV;
+
+       udev = usb_get_dev(interface_to_usbdev(interface));
+       endpoint = &interface->cur_altsetting->endpoint[1].desc;
+
+       /* check if the the device has the iso in endpoint at the correct place */
+       if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) !=
+           USB_ENDPOINT_XFER_ISOC) {
+/*             em2820_err(DRIVER_NAME " probing error: endpoint is non-ISO endpoint!\n"); */
+               return -ENODEV;
+       }
+       if ((endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_OUT) {
+/*             em2820_err(DRIVER_NAME " probing error: endpoint is ISO OUT endpoint!\n"); */
+               return -ENODEV;
+       }
+
+       /* allocate device struct */
+       retval = em2820_init_dev(&dev, udev, interface->minor, id->driver_info);
+       if (retval)
+               return retval;
+
+       em2820_info("Found %s\n", em2820_boards[id->driver_info].name);
+
+       /* save our data pointer in this interface device */
+       usb_set_intfdata(interface, dev);
+       return 0;
+}
+
+/*
+ * em2820_usb_disconnect()
+ * called when the device gets diconencted
+ * video device will be unregistered on v4l2_close in case it is still open
+ */
+static void em2820_usb_disconnect(struct usb_interface *interface)
+{
+       struct em2820 *dev = usb_get_intfdata(interface);
+       usb_set_intfdata(interface, NULL);
+
+       if (!dev)
+               return;
+
+       down_write(&em2820_disconnect);
+
+       down(&dev->lock);
+
+       em2820_info("disconnecting %s\n", dev->vdev->name);
+
+       wake_up_interruptible_all(&dev->open);
+
+       if (dev->users) {
+               em2820_warn
+                   ("device /dev/video%d is open! Deregistration and memory "
+                    "deallocation are deferred on close.\n", dev->vdev->minor);
+               dev->state |= DEV_MISCONFIGURED;
+               em2820_uninit_isoc(dev);
+               dev->state |= DEV_DISCONNECTED;
+               wake_up_interruptible(&dev->wait_frame);
+               wake_up_interruptible(&dev->wait_stream);
+       } else {
+               dev->state |= DEV_DISCONNECTED;
+               em2820_release_resources(dev);
+       }
+
+       up(&dev->lock);
+
+       if (!dev->users)
+               kfree(dev);
+
+       up_write(&em2820_disconnect);
+
+}
+
+static struct usb_driver em2820_usb_driver = {
+       .owner = THIS_MODULE,
+       .name = "em2820",
+       .probe = em2820_usb_probe,
+       .disconnect = em2820_usb_disconnect,
+       .id_table = em2820_id_table,
+};
+
+static int __init em2820_module_init(void)
+{
+       int result;
+
+       printk(KERN_INFO DRIVER_NAME " v4l2 driver version %d.%d.%d loaded\n",
+              (EM2820_VERSION_CODE >> 16) & 0xff,
+              (EM2820_VERSION_CODE >> 8) & 0xff, EM2820_VERSION_CODE & 0xff);
+#ifdef SNAPSHOT
+       printk(KERN_INFO DRIVER_NAME " snapshot date %04d-%02d-%02d\n",
+              SNAPSHOT / 10000, (SNAPSHOT / 100) % 100, SNAPSHOT % 100);
+#endif
+
+       /* register this driver with the USB subsystem */
+       result = usb_register(&em2820_usb_driver);
+       if (result)
+               em2820_err(DRIVER_NAME
+                          " usb_register failed. Error number %d.\n", result);
+
+       return result;
+}
+
+static void __exit em2820_module_exit(void)
+{
+       /* deregister this driver with the USB subsystem */
+       usb_deregister(&em2820_usb_driver);
+}
+
+module_init(em2820_module_init);
+module_exit(em2820_module_exit);
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
new file mode 100644 (file)
index 0000000..7779121
--- /dev/null
@@ -0,0 +1,479 @@
+/*
+   em2820-cards.c - driver for Empia EM2820/2840 USB video capture devices
+
+   Copyright (C) 2005 Markus Rechberger <mrechberger@gmail.com>
+                      Ludovico Cavedon <cavedon@sssup.it>
+                      Mauro Carvalho Chehab <mchehab@brturbo.com.br>
+
+   Based on the em2800 driver from Sascha Sommer <saschasommer@freenet.de>
+
+   This program is free software; you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation; either version 2 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program; if not, write to the Free Software
+   Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _EM2820_H
+#define _EM2820_H
+
+#include <linux/videodev.h>
+#include <linux/i2c.h>
+
+/* maximum number of frames that can be queued */
+#define EM2820_NUM_FRAMES 5
+/* number of frames that get used for v4l2_read() */
+#define EM2820_NUM_READ_FRAMES 2
+
+/* number of buffers for isoc transfers */
+#define EM2820_NUM_BUFS 5
+
+/* number of packets for each buffer */
+// windows requests only 40 packets .. so we better do the same
+// this is what I found out for all alternate numbers there!
+
+#define EM2820_NUM_PACKETS 40
+
+/* packet size for each packet */
+/* no longer needed: read from endpoint descriptor */
+//#define EM2820_MAX_PACKET_SIZE 3072 //7
+//#define EM2820_MAX_PACKET_SIZE 2892 //6
+//#define EM2820_MAX_PACKET_SIZE 2580 //5
+//#define EM2820_MAX_PACKET_SIZE 1448 //2
+
+/* default alternate; 0 means choose the best */
+#define EM2820_PINOUT 0
+#define EM2820_MAX_ALT 7
+
+#define EM2820_INTERLACED_DEFAULT 1
+
+/*
+#define (use usbview if you want to get the other alternate number infos)
+#define
+#define alternate number 2
+#define                        Endpoint Address: 82
+                       Direction: in
+                       Attribute: 1
+                       Type: Isoc
+                       Max Packet Size: 1448
+                       Interval: 125us
+
+  alternate number 7
+
+                       Endpoint Address: 82
+                       Direction: in
+                       Attribute: 1
+                       Type: Isoc
+                       Max Packet Size: 3072
+                       Interval: 125us
+*/
+
+/* time to wait when stopping the isoc transfer */
+#define EM2820_URB_TIMEOUT       msecs_to_jiffies(EM2820_NUM_BUFS * EM2820_NUM_PACKETS)
+
+/* the various frame states */
+enum em2820_frame_state {
+       F_UNUSED = 0,
+       F_QUEUED,
+       F_GRABBING,
+       F_DONE,
+       F_ERROR,
+};
+
+/* stream states */
+enum em2820_stream_state {
+       STREAM_OFF,
+       STREAM_INTERRUPT,
+       STREAM_ON,
+};
+
+/* frames */
+struct em2820_frame_t {
+       void *bufmem;
+       struct v4l2_buffer buf;
+       enum em2820_frame_state state;
+       struct list_head frame;
+       unsigned long vma_use_count;
+       int top_field;
+       int fieldbytesused;
+};
+
+/* io methods */
+enum em2820_io_method {
+       IO_NONE,
+       IO_READ,
+       IO_MMAP,
+};
+
+/* inputs */
+
+#define MAX_EM2820_INPUT 4
+enum enum2820_itype {
+       EM2820_VMUX_COMPOSITE1 = 1,
+       EM2820_VMUX_COMPOSITE2,
+       EM2820_VMUX_COMPOSITE3,
+       EM2820_VMUX_COMPOSITE4,
+       EM2820_VMUX_SVIDEO,
+       EM2820_VMUX_TELEVISION,
+       EM2820_VMUX_CABLE,
+       EM2820_VMUX_DVB,
+       EM2820_VMUX_DEBUG,
+       EM2820_RADIO,
+};
+
+struct em2820_input {
+       enum enum2820_itype type;
+       unsigned int vmux;
+       unsigned int amux;
+};
+
+#define INPUT(nr) (&em2820_boards[dev->model].input[nr])
+
+enum em2820_decoder {
+       EM2820_TVP5150,
+       EM2820_SAA7113,
+       EM2820_SAA7114
+};
+
+struct em2820_board {
+       char *name;
+
+       int vchannels;
+       int norm;
+       int tuner_type;
+
+       /* i2c flags */
+       unsigned int tda9887_conf;
+
+       unsigned int has_tuner:1;
+       unsigned int has_msp34xx:1;
+
+       enum em2820_decoder decoder;
+
+       struct em2820_input       input[MAX_EM2820_INPUT];
+};
+
+struct em2820_eeprom {
+       u32 id;                 /* 0x9567eb1a */
+       u16 vendor_ID;
+       u16 product_ID;
+
+       u16 chip_conf;
+
+       u16 board_conf;
+
+       u16 string1, string2, string3;
+
+       u8 string_idx_table;
+};
+
+/* device states */
+enum em2820_dev_state {
+       DEV_INITIALIZED = 0x01,
+       DEV_DISCONNECTED = 0x02,
+       DEV_MISCONFIGURED = 0x04,
+};
+
+/* tvnorms */
+struct em2820_tvnorm {
+       char *name;
+       v4l2_std_id id;
+       /* mode for saa7113h */
+       int mode;
+};
+
+/* main device struct */
+struct em2820 {
+       /* generic device properties */
+       char name[30];          /* name (including minor) of the device */
+       int model;              /* index in the device_data struct */
+       int video_inputs;       /* number of video inputs */
+       unsigned int has_tuner:1;
+       unsigned int has_msp34xx:1;
+       unsigned int has_tda9887:1;
+
+       enum em2820_decoder decoder;
+
+       int tuner_type;         /* type of the tuner */
+       int tuner_addr;         /* tuner address */
+       int tda9887_conf;
+       /* i2c i/o */
+       struct i2c_adapter i2c_adap;
+       struct i2c_client i2c_client;
+       /* video for linux */
+       int users;              /* user count for exclusive use */
+       struct video_device *vdev;      /* video for linux device struct */
+       struct video_picture vpic;      /* picture settings only used to init saa7113h */
+       struct em2820_tvnorm *tvnorm;   /* selected tv norm */
+       int ctl_freq;           /* selected frequency */
+       unsigned int ctl_input; /* selected input */
+       unsigned int ctl_ainput;        /* slected audio input */
+       int mute;
+       int volume;
+       /* frame properties */
+       struct em2820_frame_t frame[EM2820_NUM_FRAMES]; /* list of frames */
+       int num_frames;         /* number of frames currently in use */
+       unsigned int frame_count;       /* total number of transfered frames */
+       struct em2820_frame_t *frame_current;   /* the frame that is being filled */
+       int width;              /* current frame width */
+       int height;             /* current frame height */
+       int frame_size;         /* current frame size */
+       int field_size;         /* current field size */
+       int bytesperline;
+       int hscale;             /* horizontal scale factor (see datasheet) */
+       int vscale;             /* vertical scale factor (see datasheet) */
+       int interlaced;         /* 1=interlace fileds, 0=just top fileds */
+       int type;
+
+       /* states */
+       enum em2820_dev_state state;
+       enum em2820_stream_state stream;
+       enum em2820_io_method io;
+       /* locks */
+       struct semaphore lock, fileop_lock;
+       spinlock_t queue_lock;
+       struct list_head inqueue, outqueue;
+       wait_queue_head_t open, wait_frame, wait_stream;
+       struct video_device *vbi_dev;
+
+       unsigned char eedata[256];
+
+       /* usb transfer */
+       struct usb_device *udev;        /* the usb device */
+       int alt;                /* alternate */
+       int max_pkt_size;       /* max packet size of isoc transaction */
+       unsigned int alt_max_pkt_size[EM2820_MAX_ALT + 1];      /* array of wMaxPacketSize */
+       struct urb *urb[EM2820_NUM_BUFS];       /* urb for isoc transfers */
+       char *transfer_buffer[EM2820_NUM_BUFS]; /* transfer buffers for isoc transfer */
+       /* helper funcs that call usb_control_msg */
+       int (*em2820_write_regs) (struct em2820 * dev, u16 reg, char *buf,
+                                 int len);
+       int (*em2820_read_reg) (struct em2820 * dev, u16 reg);
+       int (*em2820_read_reg_req_len) (struct em2820 * dev, u8 req, u16 reg,
+                                       char *buf, int len);
+       int (*em2820_write_regs_req) (struct em2820 * dev, u8 req, u16 reg,
+                                     char *buf, int len);
+       int (*em2820_read_reg_req) (struct em2820 * dev, u8 req, u16 reg);
+};
+
+/* Provided by em2820-i2c.c */
+
+void em2820_i2c_call_clients(struct em2820 *dev, unsigned int cmd, void *arg);
+int em2820_i2c_register(struct em2820 *dev);
+int em2820_i2c_unregister(struct em2820 *dev);
+
+/* Provided by em2820-core.c */
+
+void em2820_print_ioctl(char *name, unsigned int cmd);
+
+u32 em2820_request_buffers(struct em2820 *dev, u32 count);
+void em2820_queue_unusedframes(struct em2820 *dev);
+void em2820_release_buffers(struct em2820 *dev);
+
+int em2820_read_reg_req_len(struct em2820 *dev, u8 req, u16 reg,
+                           char *buf, int len);
+int em2820_read_reg_req(struct em2820 *dev, u8 req, u16 reg);
+int em2820_read_reg(struct em2820 *dev, u16 reg);
+int em2820_write_regs_req(struct em2820 *dev, u8 req, u16 reg, char *buf,
+                         int len);
+int em2820_write_regs(struct em2820 *dev, u16 reg, char *buf, int len);
+int em2820_write_reg_bits(struct em2820 *dev, u16 reg, u8 val,
+                         u8 bitmask);
+int em2820_write_ac97(struct em2820 *dev, u8 reg, u8 * val);
+int em2820_audio_analog_set(struct em2820 *dev);
+int em2820_colorlevels_set_default(struct em2820 *dev);
+int em2820_capture_start(struct em2820 *dev, int start);
+int em2820_outfmt_set_yuv422(struct em2820 *dev);
+int em2820_accumulator_set(struct em2820 *dev, u8 xmin, u8 xmax, u8 ymin,
+                          u8 ymax);
+int em2820_capture_area_set(struct em2820 *dev, u8 hstart, u8 vstart,
+                           u16 width, u16 height);
+int em2820_scaler_set(struct em2820 *dev, u16 h, u16 v);
+int em2820_resolution_set(struct em2820 *dev);
+void em2820_isocIrq(struct urb *urb, struct pt_regs *regs);
+int em2820_init_isoc(struct em2820 *dev);
+void em2820_uninit_isoc(struct em2820 *dev);
+int em2820_set_alternate(struct em2820 *dev);
+
+/* Provided by em2820-cards.c */
+extern void em2820_card_setup(struct em2820 *dev);
+extern struct em2820_board em2820_boards[];
+extern struct usb_device_id em2820_id_table[];
+
+/* em2820 registers */
+#define USBSUSP_REG    0x0c    /* */
+
+#define AUDIOSRC_REG   0x0e
+#define XCLK_REG       0x0f
+
+#define VINMODE_REG    0x10
+#define VINCTRL_REG    0x11
+#define VINENABLE_REG  0x12    /* */
+
+#define GAMMA_REG      0x14
+#define RGAIN_REG      0x15
+#define GGAIN_REG      0x16
+#define BGAIN_REG      0x17
+#define ROFFSET_REG    0x18
+#define GOFFSET_REG    0x19
+#define BOFFSET_REG    0x1a
+
+#define OFLOW_REG      0x1b
+#define HSTART_REG     0x1c
+#define VSTART_REG     0x1d
+#define CWIDTH_REG     0x1e
+#define CHEIGHT_REG    0x1f
+
+#define YGAIN_REG      0x20
+#define YOFFSET_REG    0x21
+#define UVGAIN_REG     0x22
+#define UOFFSET_REG    0x23
+#define VOFFSET_REG    0x24
+#define SHARPNESS_REG  0x25
+
+#define COMPR_REG      0x26
+#define OUTFMT_REG     0x27
+
+#define XMIN_REG       0x28
+#define XMAX_REG       0x29
+#define YMIN_REG       0x2a
+#define YMAX_REG       0x2b
+
+#define HSCALELOW_REG  0x30
+#define HSCALEHIGH_REG 0x31
+#define VSCALELOW_REG  0x32
+#define VSCALEHIGH_REG 0x33
+
+#define AC97LSB_REG    0x40
+#define AC97MSB_REG    0x41
+#define AC97ADDR_REG   0x42
+#define AC97BUSY_REG   0x43
+
+/* em202 registers */
+#define MASTER_AC97    0x02
+#define VIDEO_AC97     0x14
+
+/* register settings */
+#define EM2820_AUDIO_SRC_TUNER 0xc0
+#define EM2820_AUDIO_SRC_LINE  0x80
+
+/* printk macros */
+
+#define em2820_err(fmt, arg...) do {\
+        printk(KERN_ERR fmt , ##arg); } while (0)
+
+#define em2820_errdev(fmt, arg...) do {\
+        printk(KERN_ERR "%s: "fmt,\
+                       dev->name , ##arg); } while (0)
+
+#define em2820_info(fmt, arg...) do {\
+        printk(KERN_INFO "%s: "fmt,\
+                       dev->name , ##arg); } while (0)
+#define em2820_warn(fmt, arg...) do {\
+        printk(KERN_WARNING "%s: "fmt,\
+                       dev->name , ##arg); } while (0)
+
+inline static int em2820_audio_source(struct em2820 *dev, int input)
+{
+       return em2820_write_reg_bits(dev, AUDIOSRC_REG, input, 0xc0);
+}
+
+inline static int em2820_audio_usb_mute(struct em2820 *dev, int mute)
+{
+       return em2820_write_reg_bits(dev, XCLK_REG, mute ? 0x00 : 0x80, 0x80);
+}
+
+inline static int em2820_audio_analog_setup(struct em2820 *dev)
+{
+       /* unmute video mixer with default volume level */
+       return em2820_write_ac97(dev, VIDEO_AC97, "\x08\x08");
+}
+
+inline static int em2820_compression_disable(struct em2820 *dev)
+{
+       /* side effect of disabling scaler and mixer */
+       return em2820_write_regs(dev, COMPR_REG, "\x00", 1);
+}
+
+inline static int em2820_contrast_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, YGAIN_REG) & 0x1f;
+}
+
+inline static int em2820_brightness_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, YOFFSET_REG);
+}
+
+inline static int em2820_saturation_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, UVGAIN_REG) & 0x1f;
+}
+
+inline static int em2820_u_balance_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, UOFFSET_REG);
+}
+
+inline static int em2820_v_balance_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, VOFFSET_REG);
+}
+
+inline static int em2820_gamma_get(struct em2820 *dev)
+{
+       return em2820_read_reg(dev, GAMMA_REG) & 0x3f;
+}
+
+inline static int em2820_contrast_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, YGAIN_REG, &tmp, 1);
+}
+
+inline static int em2820_brightness_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, YOFFSET_REG, &tmp, 1);
+}
+
+inline static int em2820_saturation_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, UVGAIN_REG, &tmp, 1);
+}
+
+inline static int em2820_u_balance_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, UOFFSET_REG, &tmp, 1);
+}
+
+inline static int em2820_v_balance_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, VOFFSET_REG, &tmp, 1);
+}
+
+inline static int em2820_gamma_set(struct em2820 *dev, s32 val)
+{
+       u8 tmp = (u8) val;
+       return em2820_write_regs(dev, GAMMA_REG, &tmp, 1);
+}
+
+/*FIXME: maxw should be dependent of alt mode */
+#define norm_maxw(dev) 720
+inline static unsigned int norm_maxh(struct em2820 *dev)
+{
+       return (dev->tvnorm->id & V4L2_STD_625_50) ? 576 : 480;
+}
+
+#endif
index 6e3ba23104d22bdd1b664e2b29b684a6c76467e7..03f360b45fdfcbd532ccca49117c42c502163e04 100644 (file)
@@ -35,6 +35,47 @@ MODULE_PARM_DESC(debug, "Debug level (0-1)");
                        printk(format , ##args); \
        } while (0)
 
+/* supported controls */
+static struct v4l2_queryctrl tvp5150_qctrl[] = {
+       {
+        .id = V4L2_CID_BRIGHTNESS,
+        .type = V4L2_CTRL_TYPE_INTEGER,
+        .name = "Brightness",
+        .minimum = 0,
+        .maximum = 255,
+        .step = 1,
+        .default_value = 0,
+        .flags = 0,
+        }, {
+            .id = V4L2_CID_CONTRAST,
+            .type = V4L2_CTRL_TYPE_INTEGER,
+            .name = "Contrast",
+            .minimum = 0,
+            .maximum = 255,
+            .step = 0x1,
+            .default_value = 0x10,
+            .flags = 0,
+            }, {
+                .id = V4L2_CID_SATURATION,
+                .type = V4L2_CTRL_TYPE_INTEGER,
+                .name = "Saturation",
+                .minimum = 0,
+                .maximum = 255,
+                .step = 0x1,
+                .default_value = 0x10,
+                .flags = 0,
+                }, {
+                    .id = V4L2_CID_HUE,
+                    .type = V4L2_CTRL_TYPE_INTEGER,
+                    .name = "Hue",
+                    .minimum = -128,
+                    .maximum = 127,
+                    .step = 0x1,
+                    .default_value = 0x10,
+                    .flags = 0,
+                    }
+};
+
 struct tvp5150 {
        struct i2c_client *client;
 
@@ -73,7 +114,7 @@ static inline void tvp5150_write(struct i2c_client *c, unsigned char addr,
 
        buffer[0] = addr;
        buffer[1] = value;
-       dprintk(1,"tvp5150: writing 0x%02x 0x%02x\n",buffer[0],buffer[1]);
+       dprintk(1, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
        if (2 != (rc = i2c_master_send(c, buffer, 2)))
                dprintk(0, "i2c i/o error: rc == %d (should be 2)\n", rc);
 }
@@ -398,28 +439,11 @@ static inline void tvp5150_selmux(struct i2c_client *c,
                                  enum tvp5150_input input)
 {
        struct tvp5150 *decoder = i2c_get_clientdata(c);
-       int tvp_input;
-
-       /* FIXME: It is dependent of basic driver */
-       switch (input)
-       {
-       case 2:
-               tvp_input=TVP5150_ANALOG_CH0;
-               break;
-       case 0:
-               tvp_input=TVP5150_ANALOG_CH1;
-               break;
-       case 1:
-               tvp_input=TVP5150_SVIDEO;
-               break;
-       default:
-               tvp_input=TVP5150_BLACK_SCREEN;
-       }
 
        if (!decoder->enable)
-               tvp_input|=TVP5150_BLACK_SCREEN;
+               input |= TVP5150_BLACK_SCREEN;
 
-       tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, tvp_input);
+       tvp5150_write(c, TVP5150_VD_IN_SRC_SEL_1, input);
 };
 
 static inline void tvp5150_reset(struct i2c_client *c)
@@ -432,7 +456,7 @@ static inline void tvp5150_reset(struct i2c_client *c)
        tvp5150_write(c, TVP5150_ANAL_CHL_CTL, 0x15);
 
        /* Normal Operation */
-//     tvp5150_write(c, TVP5150_OP_MODE_CTL, 0x00);
+//      tvp5150_write(c, TVP5150_OP_MODE_CTL, 0x00);
 
        /* Activate YCrCb output 0x9 or 0xd ? */
        tvp5150_write(c, TVP5150_MISC_CTL, 0x6f);
@@ -458,6 +482,50 @@ static inline void tvp5150_reset(struct i2c_client *c)
        tvp5150_write(c, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8);
 };
 
+static int tvp5150_get_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
+{
+/*     struct tvp5150 *decoder = i2c_get_clientdata(c); */
+
+       switch (ctrl->id) {
+       case V4L2_CID_BRIGHTNESS:
+               ctrl->value = tvp5150_read(c, TVP5150_BRIGHT_CTL);
+               return 0;
+       case V4L2_CID_CONTRAST:
+               ctrl->value = tvp5150_read(c, TVP5150_CONTRAST_CTL);
+               return 0;
+       case V4L2_CID_SATURATION:
+               ctrl->value = tvp5150_read(c, TVP5150_SATURATION_CTL);
+               return 0;
+       case V4L2_CID_HUE:
+               ctrl->value = tvp5150_read(c, TVP5150_HUE_CTL);
+               return 0;
+       default:
+               return -EINVAL;
+       }
+}
+
+static int tvp5150_set_ctrl(struct i2c_client *c, struct v4l2_control *ctrl)
+{
+/*     struct tvp5150 *decoder = i2c_get_clientdata(c); */
+
+       switch (ctrl->id) {
+       case V4L2_CID_BRIGHTNESS:
+               tvp5150_write(c, TVP5150_BRIGHT_CTL, ctrl->value);
+               return 0;
+       case V4L2_CID_CONTRAST:
+               tvp5150_write(c, TVP5150_CONTRAST_CTL, ctrl->value);
+               return 0;
+       case V4L2_CID_SATURATION:
+               tvp5150_write(c, TVP5150_SATURATION_CTL, ctrl->value);
+               return 0;
+       case V4L2_CID_HUE:
+               tvp5150_write(c, TVP5150_HUE_CTL, ctrl->value);
+               return 0;
+       default:
+               return -EINVAL;
+       }
+}
+
 /****************************************************************************
                        I2C Command
  ****************************************************************************/
@@ -478,21 +546,21 @@ static int tvp5150_command(struct i2c_client *client,
                break;
 
        case DECODER_GET_CAPABILITIES:
-       {
-               struct video_decoder_capability *cap = arg;
-
-               cap->flags = VIDEO_DECODER_PAL |
-                   VIDEO_DECODER_NTSC |
-                   VIDEO_DECODER_SECAM |
-                   VIDEO_DECODER_AUTO | VIDEO_DECODER_CCIR;
-               cap->inputs = 3;
-               cap->outputs = 1;
-               break;
-       }
+               {
+                       struct video_decoder_capability *cap = arg;
+
+                       cap->flags = VIDEO_DECODER_PAL |
+                           VIDEO_DECODER_NTSC |
+                           VIDEO_DECODER_SECAM |
+                           VIDEO_DECODER_AUTO | VIDEO_DECODER_CCIR;
+                       cap->inputs = 3;
+                       cap->outputs = 1;
+                       break;
+               }
        case DECODER_GET_STATUS:
-       {
-               break;
-       }
+               {
+                       break;
+               }
 
        case DECODER_SET_GPIO:
                break;
@@ -501,87 +569,138 @@ static int tvp5150_command(struct i2c_client *client,
                break;
 
        case DECODER_SET_NORM:
-       {
-               int *iarg = arg;
+               {
+                       int *iarg = arg;
 
-               switch (*iarg) {
+                       switch (*iarg) {
 
-               case VIDEO_MODE_NTSC:
-                       break;
+                       case VIDEO_MODE_NTSC:
+                               break;
 
-               case VIDEO_MODE_PAL:
-                       break;
+                       case VIDEO_MODE_PAL:
+                               break;
 
-               case VIDEO_MODE_SECAM:
-                       break;
+                       case VIDEO_MODE_SECAM:
+                               break;
 
-               case VIDEO_MODE_AUTO:
-                       break;
+                       case VIDEO_MODE_AUTO:
+                               break;
 
-               default:
-                       return -EINVAL;
+                       default:
+                               return -EINVAL;
 
+                       }
+                       decoder->norm = *iarg;
+                       break;
                }
-               decoder->norm = *iarg;
-               break;
-       }
        case DECODER_SET_INPUT:
-       {
-               int *iarg = arg;
-               if (*iarg < 0 || *iarg > 3) {
-                       return -EINVAL;
-               }
+               {
+                       int *iarg = arg;
+                       if (*iarg < 0 || *iarg > 3) {
+                               return -EINVAL;
+                       }
 
-               decoder->input=*iarg;
-               tvp5150_selmux(client, decoder->input);
+                       decoder->input = *iarg;
+                       tvp5150_selmux(client, decoder->input);
 
-               break;
-       }
+                       break;
+               }
        case DECODER_SET_OUTPUT:
-       {
-               int *iarg = arg;
+               {
+                       int *iarg = arg;
 
-               /* not much choice of outputs */
-               if (*iarg != 0) {
-                       return -EINVAL;
+                       /* not much choice of outputs */
+                       if (*iarg != 0) {
+                               return -EINVAL;
+                       }
+                       break;
                }
-               break;
-       }
        case DECODER_ENABLE_OUTPUT:
-       {
-               int *iarg = arg;
+               {
+                       int *iarg = arg;
 
-               decoder->enable = (*iarg != 0);
+                       decoder->enable = (*iarg != 0);
 
-               tvp5150_selmux(client, decoder->input);
+                       tvp5150_selmux(client, decoder->input);
 
-               break;
-       }
-       case DECODER_SET_PICTURE:
-       {
-               struct video_picture *pic = arg;
-               if (decoder->bright != pic->brightness) {
-                       /* We want 0 to 255 we get 0-65535 */
-                       decoder->bright = pic->brightness;
-                       tvp5150_write(client, TVP5150_BRIGHT_CTL, decoder->bright >> 8);
+                       break;
                }
-               if (decoder->contrast != pic->contrast) {
-                       /* We want 0 to 255 we get 0-65535 */
-                       decoder->contrast = pic->contrast;
-                       tvp5150_write(client, TVP5150_CONTRAST_CTL, decoder->contrast >> 8);
+       case VIDIOC_QUERYCTRL:
+               {
+                       struct v4l2_queryctrl *qc = arg;
+                       u8 i, n;
+
+                       dprintk(1, KERN_DEBUG "VIDIOC_QUERYCTRL");
+
+                       n = sizeof(tvp5150_qctrl) / sizeof(tvp5150_qctrl[0]);
+                       for (i = 0; i < n; i++)
+                               if (qc->id && qc->id == tvp5150_qctrl[i].id) {
+                                       memcpy(qc, &(tvp5150_qctrl[i]),
+                                              sizeof(*qc));
+                                       return 0;
+                               }
+
+                       return -EINVAL;
                }
-               if (decoder->sat != pic->colour) {
-                       /* We want 0 to 255 we get 0-65535 */
-                       decoder->sat = pic->colour;
-                       tvp5150_write(client, TVP5150_SATURATION_CTL, decoder->contrast >> 8);
+       case VIDIOC_G_CTRL:
+               {
+                       struct v4l2_control *ctrl = arg;
+                       dprintk(1, KERN_DEBUG "VIDIOC_G_CTRL");
+
+                       return tvp5150_get_ctrl(client, ctrl);
                }
-               if (decoder->hue != pic->hue) {
-                       /* We want -128 to 127 we get 0-65535 */
-                       decoder->hue = pic->hue;
-                       tvp5150_write(client, TVP5150_HUE_CTL, (decoder->hue - 32768) >> 8);
+       case VIDIOC_S_CTRL_OLD: /* ??? */
+       case VIDIOC_S_CTRL:
+               {
+                       struct v4l2_control *ctrl = arg;
+                       u8 i, n;
+                       dprintk(1, KERN_DEBUG "VIDIOC_S_CTRL");
+                       n = sizeof(tvp5150_qctrl) / sizeof(tvp5150_qctrl[0]);
+                       for (i = 0; i < n; i++)
+                               if (ctrl->id == tvp5150_qctrl[i].id) {
+                                       if (ctrl->value <
+                                           tvp5150_qctrl[i].minimum
+                                           || ctrl->value >
+                                           tvp5150_qctrl[i].maximum)
+                                               return -ERANGE;
+                                       dprintk(1,
+                                               KERN_DEBUG
+                                               "VIDIOC_S_CTRL: id=%d, value=%d",
+                                               ctrl->id, ctrl->value);
+                                       return tvp5150_set_ctrl(client, ctrl);
+                               }
+                       return -EINVAL;
+               }
+
+       case DECODER_SET_PICTURE:
+               {
+                       struct video_picture *pic = arg;
+                       if (decoder->bright != pic->brightness) {
+                               /* We want 0 to 255 we get 0-65535 */
+                               decoder->bright = pic->brightness;
+                               tvp5150_write(client, TVP5150_BRIGHT_CTL,
+                                             decoder->bright >> 8);
+                       }
+                       if (decoder->contrast != pic->contrast) {
+                               /* We want 0 to 255 we get 0-65535 */
+                               decoder->contrast = pic->contrast;
+                               tvp5150_write(client, TVP5150_CONTRAST_CTL,
+                                             decoder->contrast >> 8);
+                       }
+                       if (decoder->sat != pic->colour) {
+                               /* We want 0 to 255 we get 0-65535 */
+                               decoder->sat = pic->colour;
+                               tvp5150_write(client, TVP5150_SATURATION_CTL,
+                                             decoder->contrast >> 8);
+                       }
+                       if (decoder->hue != pic->hue) {
+                               /* We want -128 to 127 we get 0-65535 */
+                               decoder->hue = pic->hue;
+                               tvp5150_write(client, TVP5150_HUE_CTL,
+                                             (decoder->hue - 32768) >> 8);
+                       }
+                       break;
                }
-               break;
-       }
        default:
                return -EINVAL;
        }
@@ -594,15 +713,14 @@ static int tvp5150_command(struct i2c_client *client,
  ****************************************************************************/
 static struct i2c_driver driver;
 
-static struct i2c_client client_template =
-{
-       .name      = "(unset)",
-       .flags     = I2C_CLIENT_ALLOW_USE,
-       .driver    = &driver,
+static struct i2c_client client_template = {
+       .name = "(unset)",
+       .flags = I2C_CLIENT_ALLOW_USE,
+       .driver = &driver,
 };
 
-static int tvp5150_detect_client (struct i2c_adapter *adapter,
-               int address, int kind)
+static int tvp5150_detect_client(struct i2c_adapter *adapter,
+                                int address, int kind)
 {
        struct i2c_client *client;
        struct tvp5150 *core;
@@ -625,7 +743,7 @@ static int tvp5150_detect_client (struct i2c_adapter *adapter,
        client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
        if (client == 0)
                return -ENOMEM;
-       memcpy(client,&client_template,sizeof(struct i2c_client));
+       memcpy(client, &client_template, sizeof(struct i2c_client));
 
        core = kmalloc(sizeof(struct tvp5150), GFP_KERNEL);
        if (core == 0) {
@@ -651,13 +769,13 @@ static int tvp5150_detect_client (struct i2c_adapter *adapter,
                return rv;
        }
 
-       dump_reg (client);
+       if (debug > 1)
+               dump_reg(client);
 
        return 0;
 }
 
-static int
-tvp5150_attach_adapter (struct i2c_adapter *adapter)
+static int tvp5150_attach_adapter(struct i2c_adapter *adapter)
 {
        dprintk(1,
                KERN_INFO
@@ -666,8 +784,7 @@ tvp5150_attach_adapter (struct i2c_adapter *adapter)
        return i2c_probe(adapter, &addr_data, &tvp5150_detect_client);
 }
 
-static int
-tvp5150_detach_client (struct i2c_client *client)
+static int tvp5150_detach_client(struct i2c_client *client)
 {
        struct tvp5150 *decoder = i2c_get_clientdata(client);
        int err;
@@ -699,14 +816,12 @@ static struct i2c_driver driver = {
        .command = tvp5150_command,
 };
 
-static int __init
-tvp5150_init (void)
+static int __init tvp5150_init(void)
 {
        return i2c_add_driver(&driver);
 }
 
-static void __exit
-tvp5150_exit (void)
+static void __exit tvp5150_exit(void)
 {
        i2c_del_driver(&driver);
 }