regulator: core: Add set/get_current_limit helpers for regmap users
authorAxel Lin <axel.lin@ingics.com>
Thu, 28 Feb 2019 13:40:13 +0000 (21:40 +0800)
committerMark Brown <broonie@kernel.org>
Sun, 3 Mar 2019 23:45:27 +0000 (23:45 +0000)
By setting curr_table, n_current_limits, csel_reg and csel_mask, the
regmap users can use regulator_set_current_limit_regmap and
regulator_get_current_limit_regmap for set/get_current_limit callbacks.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/helpers.c
include/linux/regulator/driver.h

index 68ac6017ef28711782d9b2e40424913a0ed4f892..32d3f0499e2d95b8e6fe9e35b786a11c7ebbcf24 100644 (file)
@@ -780,3 +780,89 @@ int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
                                  rdev->desc->active_discharge_mask, val);
 }
 EXPORT_SYMBOL_GPL(regulator_set_active_discharge_regmap);
+
+/**
+ * regulator_set_current_limit_regmap - set_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ * @min_uA: Lower bound for current limit
+ * @max_uA: Upper bound for current limit
+ *
+ * Regulators that use regmap for their register I/O can set curr_table,
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their set_current_limit operation, saving some code.
+ */
+int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
+                                      int min_uA, int max_uA)
+{
+       unsigned int n_currents = rdev->desc->n_current_limits;
+       int i, sel = -1;
+
+       if (n_currents == 0)
+               return -EINVAL;
+
+       if (rdev->desc->curr_table) {
+               const unsigned int *curr_table = rdev->desc->curr_table;
+               bool ascend = curr_table[n_currents - 1] > curr_table[0];
+
+               /* search for closest to maximum */
+               if (ascend) {
+                       for (i = n_currents - 1; i >= 0; i--) {
+                               if (min_uA <= curr_table[i] &&
+                                   curr_table[i] <= max_uA) {
+                                       sel = i;
+                                       break;
+                               }
+                       }
+               } else {
+                       for (i = 0; i < n_currents; i++) {
+                               if (min_uA <= curr_table[i] &&
+                                   curr_table[i] <= max_uA) {
+                                       sel = i;
+                                       break;
+                               }
+                       }
+               }
+       }
+
+       if (sel < 0)
+               return -EINVAL;
+
+       sel <<= ffs(rdev->desc->csel_mask) - 1;
+
+       return regmap_update_bits(rdev->regmap, rdev->desc->csel_reg,
+                                 rdev->desc->csel_mask, sel);
+}
+EXPORT_SYMBOL_GPL(regulator_set_current_limit_regmap);
+
+/**
+ * regulator_get_current_limit_regmap - get_current_limit for regmap users
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O can set the
+ * csel_reg and csel_mask fields in their descriptor and then use this
+ * as their get_current_limit operation, saving some code.
+ */
+int regulator_get_current_limit_regmap(struct regulator_dev *rdev)
+{
+       unsigned int val;
+       int ret;
+
+       ret = regmap_read(rdev->regmap, rdev->desc->csel_reg, &val);
+       if (ret != 0)
+               return ret;
+
+       val &= rdev->desc->csel_mask;
+       val >>= ffs(rdev->desc->csel_mask) - 1;
+
+       if (rdev->desc->curr_table) {
+               if (val >= rdev->desc->n_current_limits)
+                       return -EINVAL;
+
+               return rdev->desc->curr_table[val];
+       }
+
+       return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_get_current_limit_regmap);
index b9557c9623b5afc731204db8a485825606b606a7..377da235711895321220522f3d3595817c1485a9 100644 (file)
@@ -264,6 +264,7 @@ enum regulator_type {
  * @continuous_voltage_range: Indicates if the regulator can set any
  *                            voltage within constrains range.
  * @n_voltages: Number of selectors available for ops.list_voltage().
+ * @n_current_limits: Number of selectors available for current limits
  *
  * @min_uV: Voltage given by the lowest selector (if linear mapping)
  * @uV_step: Voltage increase with each selector (if linear mapping)
@@ -278,6 +279,7 @@ enum regulator_type {
  * @n_linear_ranges: Number of entries in the @linear_ranges (and in
  *                  linear_range_selectors if used) table(s).
  * @volt_table: Voltage mapping table (if table based mapping)
+ * @curr_table: Current limit mapping table (if table based mapping)
  *
  * @vsel_range_reg: Register for range selector when using pickable ranges
  *                 and regulator_regmap_X_voltage_X_pickable functions.
@@ -333,6 +335,7 @@ struct regulator_desc {
        int id;
        unsigned int continuous_voltage_range:1;
        unsigned n_voltages;
+       unsigned int n_current_limits;
        const struct regulator_ops *ops;
        int irq;
        enum regulator_type type;
@@ -351,6 +354,7 @@ struct regulator_desc {
        int n_linear_ranges;
 
        const unsigned int *volt_table;
+       const unsigned int *curr_table;
 
        unsigned int vsel_range_reg;
        unsigned int vsel_range_mask;
@@ -534,6 +538,9 @@ int regulator_set_pull_down_regmap(struct regulator_dev *rdev);
 
 int regulator_set_active_discharge_regmap(struct regulator_dev *rdev,
                                          bool enable);
+int regulator_set_current_limit_regmap(struct regulator_dev *rdev,
+                                      int min_uA, int max_uA);
+int regulator_get_current_limit_regmap(struct regulator_dev *rdev);
 void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data);
 
 void regulator_lock(struct regulator_dev *rdev);