- "ns16550"
- "ns16750"
- "ns16850"
- - "nvidia,tegra20-uart"
+ - For Tegra20, must contain "nvidia,tegra20-uart"
+ - For other Tegra, must contain '"nvidia,<chip>-uart",
+ "nvidia,tegra20-uart"' where <chip> is tegra30, tegra114, tegra124,
+ tegra132, or tegra210.
- "nxp,lpc3220-uart"
- "ralink,rt2880-uart"
- "ibm,qpace-nwp-serial"
- "altr,16550-FIFO64"
- "altr,16550-FIFO128"
- "fsl,16550-FIFO64"
+ - "fsl,ns16550"
- "serial" if the port type is unknown.
- reg : offset and length of the register set for the device.
- interrupts : should contain uart interrupt.
driver is allowed to detect support for the capability even without this
property.
+ Note:
+ * fsl,ns16550:
+ ------------
+ Freescale DUART is very similar to the PC16552D (and to a
+ pair of NS16550A), albeit with some nonstandard behavior such as
+ erratum A-004737 (relating to incorrect BRK handling).
+
+ Represents a single port that is compatible with the DUART found
+ on many Freescale chips (examples include mpc8349, mpc8548,
+ mpc8641d, p4080 and ls2085a).
+
Example:
uart@80230000 {
using them to avoid name-space collisions.
abilis Abilis Systems
+abcn Abracon Corporation
active-semi Active-Semi International Inc
ad Avionic Design GmbH
adapteva Adapteva, Inc.
+adh AD Holdings Plc.
adi Analog Devices, Inc.
aeroflexgaisler Aeroflex Gaisler AB
-ak Asahi Kasei Corp.
allwinner Allwinner Technology Co., Ltd.
+ alphascale AlphaScale Integrated Circuits Systems, Inc.
altr Altera Corp.
amcc Applied Micro Circuits Corporation (APM, formally AMCC)
amd Advanced Micro Devices (AMD), Inc.
apm Applied Micro Circuits Corporation (APM)
arm ARM Ltd.
armadeus ARMadeus Systems SARL
+asahi-kasei Asahi Kasei Corp.
atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
+avic Shanghai AVIC Optoelectronics Co., Ltd.
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.
cavium Cavium, Inc.
cdns Cadence Design Systems Inc.
chipidea Chipidea, Inc
+ chipspark ChipSPARK
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
+ cloudengines Cloud Engines, Inc.
cnm Chips&Media, Inc.
+cnxt Conexant Systems, Inc.
cortina Cortina Systems, Inc.
+cosmic Cosmic Circuits
crystalfontz Crystalfontz America, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
epfl Ecole Polytechnique Fédérale de Lausanne
epson Seiko Epson Corp.
est ESTeem Wireless Modems
+ettus NI Ettus Research
eukrea Eukréa Electromatique
everest Everest Semiconductor Co. Ltd.
+everspin Everspin Technologies, Inc.
excito Excito
fcs Fairchild Semiconductor
+ firefly Firefly
fsl Freescale Semiconductor
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
geniatech Geniatech, Inc.
+giantplus Giantplus Technology Co., Ltd.
globalscale Globalscale Technologies, Inc.
gmt Global Mixed-mode Technology, Inc.
google Google, Inc.
gw Gateworks Corporation
hannstar HannStar Display Corporation
haoyu Haoyu Microelectronic Co. Ltd.
+himax Himax Technologies, Inc.
hisilicon Hisilicon Limited.
hit Hitachi Ltd.
honeywell Honeywell
intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
-isil Intersil (deprecated, use isl)
-isl Intersil
+isil Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
lacie LaCie
nxp NXP Semiconductors
onnn ON Semiconductor Corp.
opencores OpenCores.org
+ovti OmniVision Technologies
panasonic Panasonic Corporation
+parade Parade Technologies Inc.
pericom Pericom Technology Inc.
phytec PHYTEC Messtechnik GmbH
picochip Picochip Ltd
powervr PowerVR (deprecated, use img)
qca Qualcomm Atheros, Inc.
qcom Qualcomm Technologies, Inc
+qemu QEMU, a generic and open source machine emulator and virtualizer
qnap QNAP Systems, Inc.
radxa Radxa
raidsonic RaidSonic Technology GmbH
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
+semtech Semtech Corporation
sil Silicon Image
silabs Silicon Laboratories
+siliconmitus Silicon Mitus, Inc.
simtek
sii Seiko Instruments, Inc.
silergy Silergy Corp.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.
+sprd Spreadtrum Communications Inc.
st STMicroelectronics
ste ST-Ericsson
stericsson ST-Ericsson
toradex Toradex AG
toshiba Toshiba Corporation
toumaz Toumaz
+truly Truly Semiconductors Limited
usi Universal Scientific Industrial Co., Ltd.
v3 V3 Semiconductor
variscite Variscite Ltd.
via VIA Technologies, Inc.
+virtio Virtual I/O Device Specification, developed by the OASIS consortium
voipac Voipac Technologies s.r.o.
winbond Winbond Electronics corp.
wlf Wolfson Microelectronics
ifeq ($(CONFIG_OF),y)
+ dtb-$(CONFIG_MACH_ASM9260) += \
+ alphascale-asm9260-devkit.dtb
# Keep at91 dtb files sorted alphabetically for each SoC
- # rm9200
- dtb-$(CONFIG_ARCH_AT91) += at91rm9200ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += mpa1600.dtb
- # sam9260
- dtb-$(CONFIG_ARCH_AT91) += animeo_ip.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91-qil_a9260.dtb
- dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb
- dtb-$(CONFIG_ARCH_AT91) += ethernut5.dtb
- dtb-$(CONFIG_ARCH_AT91) += evk-pro3.dtb
- dtb-$(CONFIG_ARCH_AT91) += tny_a9260.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9260.dtb
- # sam9261
- dtb-$(CONFIG_ARCH_AT91) += at91sam9261ek.dtb
- # sam9263
- dtb-$(CONFIG_ARCH_AT91) += at91sam9263ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += tny_a9263.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9263.dtb
- # sam9g20
- dtb-$(CONFIG_ARCH_AT91) += at91-foxg20.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g20ek_2mmc.dtb
- dtb-$(CONFIG_ARCH_AT91) += kizbox.dtb
- dtb-$(CONFIG_ARCH_AT91) += tny_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20.dtb
- dtb-$(CONFIG_ARCH_AT91) += usb_a9g20_lpw.dtb
- # sam9g45
- dtb-$(CONFIG_ARCH_AT91) += at91sam9m10g45ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb
- # sam9n12
- dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb
- # sam9rl
- dtb-$(CONFIG_ARCH_AT91) += at91sam9rlek.dtb
- # sam9x5
- dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
- # sama5d3
- dtb-$(CONFIG_ARCH_AT91) += at91-sama5d3_xplained.dtb
- dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb
- dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb
- # sama5d4
- dtb-$(CONFIG_ARCH_AT91) += at91-sama5d4ek.dtb
-
- dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
- dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
- dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+ dtb-$(CONFIG_SOC_SAM_V4_V5) += \
+ at91rm9200ek.dtb \
+ mpa1600.dtb \
+ animeo_ip.dtb \
+ at91-qil_a9260.dtb \
+ aks-cdu.dtb \
+ ethernut5.dtb \
+ evk-pro3.dtb \
+ tny_a9260.dtb \
+ usb_a9260.dtb \
+ at91sam9261ek.dtb \
+ at91sam9263ek.dtb \
+ tny_a9263.dtb \
+ usb_a9263.dtb \
+ at91-foxg20.dtb \
+ at91sam9g20ek.dtb \
+ at91sam9g20ek_2mmc.dtb \
+ kizbox.dtb \
+ tny_a9g20.dtb \
+ usb_a9g20.dtb \
+ usb_a9g20_lpw.dtb \
+ at91sam9m10g45ek.dtb \
+ pm9g45.dtb \
+ at91sam9n12ek.dtb \
+ at91sam9rlek.dtb \
+ at91-ariag25.dtb \
+ at91-cosino_mega2560.dtb \
+ at91sam9g15ek.dtb \
+ at91sam9g25ek.dtb \
+ at91sam9g35ek.dtb \
+ at91sam9x25ek.dtb \
+ at91sam9x35ek.dtb
+ dtb-$(CONFIG_SOC_SAM_V7) += \
+ at91-sama5d3_xplained.dtb \
+ sama5d31ek.dtb \
+ sama5d33ek.dtb \
+ sama5d34ek.dtb \
+ sama5d35ek.dtb \
+ sama5d36ek.dtb \
+ at91-sama5d4ek.dtb
+ dtb-$(CONFIG_ARCH_ATLAS6) += \
+ atlas6-evb.dtb
+ dtb-$(CONFIG_ARCH_ATLAS7) += \
+ atlas7-evb.dtb
+ dtb-$(CONFIG_ARCH_AXXIA) += \
+ axm5516-amarillo.dtb
+ dtb-$(CONFIG_ARCH_BCM2835) += \
+ bcm2835-rpi-b.dtb \
+ bcm2835-rpi-b-plus.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-luxul-xwc-1000.dtb \
bcm4708-netgear-r6250.dtb \
bcm4708-netgear-r6300-v2.dtb \
bcm47081-asus-rt-n18u.dtb \
- bcm47081-buffalo-wzr-600dhp2.dtb
- dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
- dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
+ bcm47081-buffalo-wzr-600dhp2.dtb \
+ bcm47081-buffalo-wzr-900dhp.dtb
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
+ bcm963138dvt.dtb
+ dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
+ bcm911360_entphn.dtb \
bcm911360k.dtb \
bcm958300k.dtb
- dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
+ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \
+ bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
- berlin2-sony-nsz-gs7.dtb \
- berlin2cd-google-chromecast.dtb \
+ berlin2-sony-nsz-gs7.dtb \
+ berlin2cd-google-chromecast.dtb \
berlin2q-marvell-dmp.dtb
dtb-$(CONFIG_ARCH_BRCMSTB) += \
bcm7445-bcm97445svmb.dtb
- dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
+ dtb-$(CONFIG_ARCH_DAVINCI) += \
+ da850-enbw-cmc.dtb \
da850-evm.dtb
- dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
- dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
- exynos3250-rinato.dtb \
+ dtb-$(CONFIG_ARCH_DIGICOLOR) += \
+ cx92755_equinox.dtb
+ dtb-$(CONFIG_ARCH_EFM32) += \
+ efm32gg-dk3750.dtb
+ dtb-$(CONFIG_ARCH_EXYNOS3) += \
+ exynos3250-monk.dtb \
+ exynos3250-rinato.dtb
+ dtb-$(CONFIG_ARCH_EXYNOS4) += \
exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4412-origen.dtb \
exynos4412-smdk4412.dtb \
exynos4412-tiny4412.dtb \
- exynos4412-trats2.dtb \
+ exynos4412-trats2.dtb
+ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5422-odroidxu3.dtb \
exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb \
exynos5800-peach-pi.dtb
- dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb
- dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb
- dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
+ dtb-$(CONFIG_ARCH_HI3xxx) += \
+ hi3620-hi4511.dtb
+ dtb-$(CONFIG_ARCH_HIX5HD2) += \
+ hisi-x5hd2-dkb.dtb
+ dtb-$(CONFIG_ARCH_HIGHBANK) += \
+ highbank.dtb \
ecx-2000.dtb
- dtb-$(CONFIG_ARCH_HIP04) += hip04-d01.dtb
- dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
+ dtb-$(CONFIG_ARCH_HIP01) += \
+ hip01-ca9x2.dtb
+ dtb-$(CONFIG_ARCH_HIP04) += \
+ hip04-d01.dtb
+ dtb-$(CONFIG_ARCH_INTEGRATOR) += \
+ integratorap.dtb \
integratorcp.dtb
- dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \
+ dtb-$(CONFIG_ARCH_KEYSTONE) += \
+ k2hk-evm.dtb \
k2l-evm.dtb \
k2e-evm.dtb
- dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
+ dtb-$(CONFIG_MACH_KIRKWOOD) += \
+ kirkwood-b3.dtb \
+ kirkwood-blackarmor-nas220.dtb \
kirkwood-cloudbox.dtb \
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-openrd-base.dtb \
kirkwood-openrd-client.dtb \
kirkwood-openrd-ultimate.dtb \
+ kirkwood-pogo_e02.dtb \
kirkwood-rd88f6192.dtb \
kirkwood-rd88f6281-z0.dtb \
kirkwood-rd88f6281-a.dtb \
kirkwood-ts219-6282.dtb \
kirkwood-ts419-6281.dtb \
kirkwood-ts419-6282.dtb
- dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
- dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
- dtb-$(CONFIG_MACH_MESON6) += meson6-atv1200.dtb
- dtb-$(CONFIG_ARCH_MMP) += pxa168-aspenite.dtb \
+ dtb-$(CONFIG_ARCH_LPC32XX) += \
+ ea3250.dtb phy3250.dtb
+ dtb-$(CONFIG_MACH_MESON6) += \
+ meson6-atv1200.dtb
+ dtb-$(CONFIG_ARCH_MMP) += \
+ pxa168-aspenite.dtb \
pxa910-dkb.dtb \
mmp2-brownstone.dtb
- dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
- dtb-$(CONFIG_ARCH_MXC) += \
+ dtb-$(CONFIG_ARCH_MOXART) += \
+ moxart-uc7112lx.dtb
+ dtb-$(CONFIG_SOC_IMX1) += \
imx1-ads.dtb \
- imx1-apf9328.dtb \
+ imx1-apf9328.dtb
+ dtb-$(CONFIG_SOC_IMX25) += \
imx25-eukrea-mbimxsd25-baseboard.dtb \
imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \
imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \
imx25-karo-tx25.dtb \
- imx25-pdk.dtb \
+ imx25-pdk.dtb
+ dtb-$(CONFIG_SOC_IMX31) += \
imx27-apf27.dtb \
imx27-apf27dev.dtb \
imx27-eukrea-mbimxsd27-baseboard.dtb \
imx27-pdk.dtb \
imx27-phytec-phycore-rdk.dtb \
- imx27-phytec-phycard-s-rdk.dtb \
- imx31-bug.dtb \
+ imx27-phytec-phycard-s-rdk.dtb
+ dtb-$(CONFIG_SOC_IMX31) += \
+ imx31-bug.dtb
+ dtb-$(CONFIG_SOC_IMX35) += \
imx35-eukrea-mbimxsd35-baseboard.dtb \
- imx35-pdk.dtb \
- imx50-evk.dtb \
+ imx35-pdk.dtb
+ dtb-$(CONFIG_SOC_IMX50) += \
+ imx50-evk.dtb
+ dtb-$(CONFIG_SOC_IMX51) += \
imx51-apf51.dtb \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
- imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-eukrea-mbimxsd51-baseboard.dtb
+ dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-smd.dtb \
imx53-tx53-x03x.dtb \
imx53-tx53-x13x.dtb \
- imx53-voipac-bsb.dtb \
+ imx53-voipac-bsb.dtb
+ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-aristainetos_4.dtb \
imx6dl-aristainetos_7.dtb \
imx6dl-cubox-i.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-811x.dtb \
+ imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6q-arm2.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
imx6q-tbs2910.dtb \
- imx6q-udoo.dtb \
- imx6q-wandboard.dtb \
- imx6q-wandboard-revb1.dtb \
imx6q-tx6q-1010.dtb \
imx6q-tx6q-1010-comtft.dtb \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1110.dtb \
- imx6sl-evk.dtb \
- imx6sx-sdb.dtb \
+ imx6q-udoo.dtb \
+ imx6q-wandboard.dtb \
+ imx6q-wandboard-revb1.dtb
+ dtb-$(CONFIG_SOC_IMX6SL) += \
+ imx6sl-evk.dtb
+ dtb-$(CONFIG_SOC_IMX6SX) += \
+ imx6sx-sabreauto.dtb \
+ imx6sx-sdb.dtb
+ dtb-$(CONFIG_SOC_LS1021A) += \
ls1021a-qds.dtb \
- ls1021a-twr.dtb \
+ ls1021a-twr.dtb
+ dtb-$(CONFIG_SOC_VF610) += \
vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
- dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
+ dtb-$(CONFIG_ARCH_MXS) += \
+ imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apf28.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
- dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \
+ dtb-$(CONFIG_ARCH_NOMADIK) += \
+ ste-nomadik-s8815.dtb \
ste-nomadik-nhk15.dtb
- dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
+ dtb-$(CONFIG_ARCH_NSPIRE) += \
+ nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
- dtb-$(CONFIG_ARCH_OMAP2) += omap2420-h4.dtb \
+ dtb-$(CONFIG_ARCH_OMAP2) += \
+ omap2420-h4.dtb \
omap2420-n800.dtb \
omap2420-n810.dtb \
omap2420-n810-wimax.dtb \
omap2430-sdp.dtb
- dtb-$(CONFIG_ARCH_OMAP3) += am3517-craneboard.dtb \
+ dtb-$(CONFIG_ARCH_OMAP3) += \
+ am3517-craneboard.dtb \
am3517-evm.dtb \
am3517_mt_ventoux.dtb \
omap3430-sdp.dtb \
omap3-sbc-t3730.dtb \
omap3-thunder.dtb \
omap3-zoom3.dtb
- dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \
+ dtb-$(CONFIG_SOC_TI81XX) += \
+ dm8168-evm.dtb
+ dtb-$(CONFIG_SOC_AM33XX) += \
+ am335x-base0033.dtb \
am335x-bone.dtb \
am335x-boneblack.dtb \
am335x-evm.dtb \
am335x-nano.dtb \
am335x-pepper.dtb \
am335x-lxm.dtb
- dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
+ dtb-$(CONFIG_ARCH_OMAP4) += \
+ omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
omap4-var-stk-om44.dtb
- dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \
+ dtb-$(CONFIG_SOC_AM43XX) += \
+ am43x-epos-evm.dtb \
am437x-sk-evm.dtb \
+ am437x-idk-evm.dtb \
am437x-gp-evm.dtb
- dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \
+ dtb-$(CONFIG_SOC_OMAP5) += \
+ omap5-cm-t54.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
- dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+ dtb-$(CONFIG_SOC_DRA7XX) += \
+ dra7-evm.dtb \
am57xx-beagle-x15.dtb \
dra72-evm.dtb
- dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
+ dtb-$(CONFIG_ARCH_ORION5X) += \
+ orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-maxtor-shared-storage-2.dtb \
orion5x-rd88f5182-nas.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
+ dtb-$(CONFIG_ARCH_PRIMA2) += \
+ prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8064-cm-qs600.dtb \
qcom-apq8064-ifc6410.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
- dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
+ dtb-$(CONFIG_ARCH_REALVIEW) += \
+ arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
rk3066a-marsboard.dtb \
+ rk3066a-rayeager.dtb \
rk3188-radxarock.dtb \
rk3288-evb-act8846.dtb \
- rk3288-evb-rk808.dtb
- dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
- dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \
+ rk3288-evb-rk808.dtb \
+ rk3288-firefly-beta.dtb \
+ rk3288-firefly.dtb
+ dtb-$(CONFIG_ARCH_S3C24XX) += \
+ s3c2416-smdk2416.dtb
+ dtb-$(CONFIG_ARCH_S3C64XX) += \
+ s3c6410-mini6410.dtb \
s3c6410-smdk6410.dtb
- dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \
+ dtb-$(CONFIG_ARCH_S5PV210) += \
+ s5pv210-aquila.dtb \
s5pv210-goni.dtb \
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \
- r8a7790-lager.dtb \
sh7372-mackerel.dtb \
sh73a0-kzm9g.dtb \
sh73a0-kzm9g-reference.dtb
- dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
+ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += \
+ emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
+ r8a73a4-ape6evm.dtb \
r8a7740-armadillo800eva.dtb \
r8a7779-marzen.dtb \
r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
r8a7794-alt.dtb
- dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+ dtb-$(CONFIG_ARCH_SOCFPGA) += \
+ socfpga_arria5_socdk.dtb \
socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
socfpga_vt.dtb
- dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
+ dtb-$(CONFIG_ARCH_SPEAR13XX) += \
+ spear1310-evb.dtb \
spear1340-evb.dtb
- dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
+ dtb-$(CONFIG_ARCH_SPEAR3XX) += \
+ spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb \
spear320-hmi.dtb
- dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
- dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+ dtb-$(CONFIG_ARCH_SPEAR6XX) += \
+ spear600-evb.dtb
+ dtb-$(CONFIG_ARCH_STI) += \
+ stih407-b2120.dtb \
stih410-b2120.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
stih416-b2020.dtb \
- stih416-b2020e.dtb
+ stih416-b2020e.dtb \
+ stih418-b2199.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
+ sun4i-a10-chuwi-v7-cw0825.dtb \
sun4i-a10-cubieboard.dtb \
+ sun4i-a10-marsboard.dtb \
sun4i-a10-mini-xplus.dtb \
+ sun4i-a10-mk802.dtb \
+ sun4i-a10-mk802ii.dtb \
sun4i-a10-hackberry.dtb \
+ sun4i-a10-hyundai-a7hd.dtb \
sun4i-a10-inet97fv2.dtb \
sun4i-a10-olinuxino-lime.dtb \
sun4i-a10-pcduino.dtb
dtb-$(CONFIG_MACH_SUN5I) += \
+ sun5i-a10s-mk802.dtb \
sun5i-a10s-olinuxino-micro.dtb \
sun5i-a10s-r7-tv-dongle.dtb \
sun5i-a13-hsg-h702.dtb \
sun6i-a31-app4-evb1.dtb \
sun6i-a31-colombus.dtb \
sun6i-a31-hummingbird.dtb \
- sun6i-a31-m9.dtb
+ sun6i-a31-m9.dtb \
+ sun6i-a31s-cs908.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
sun7i-a20-bananapi.dtb \
+ sun7i-a20-bananapro.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-pcduino3.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
- sun8i-a23-ippo-q8h-v5.dtb
+ sun8i-a23-ippo-q8h-v5.dtb \
+ sun8i-a23-ippo-q8h-v1.2.dtb
dtb-$(CONFIG_MACH_SUN9I) += \
sun9i-a80-optimus.dtb
- dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
+ dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
+ tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
tegra20-paz00.dtb \
tegra20-tec.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
- tegra20-whistler.dtb \
+ tegra20-whistler.dtb
+ dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += \
tegra30-apalis-eval.dtb \
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
- tegra30-colibri-eval-v3.dtb \
+ tegra30-colibri-eval-v3.dtb
+ dtb-$(CONFIG_ARCH_TEGRA_114_SOC) += \
tegra114-dalmore.dtb \
tegra114-roth.dtb \
- tegra114-tn7.dtb \
+ tegra114-tn7.dtb
+ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
tegra124-jetson-tk1.dtb \
tegra124-nyan-big.dtb \
tegra124-venice2.dtb
- dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
- dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+ dtb-$(CONFIG_ARCH_U300) += \
+ ste-u300.dtb
+ dtb-$(CONFIG_ARCH_U8500) += \
+ ste-snowball.dtb \
ste-hrefprev60-stuib.dtb \
ste-hrefprev60-tvk.dtb \
ste-hrefv60plus-stuib.dtb \
ste-hrefv60plus-tvk.dtb \
ste-ccu8540.dtb \
ste-ccu9540.dtb
- dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
+ dtb-$(CONFIG_ARCH_VERSATILE) += \
+ versatile-ab.dtb \
versatile-pb.dtb
- dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
+ dtb-$(CONFIG_ARCH_VEXPRESS) += \
+ vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb
- dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb
- dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
+ dtb-$(CONFIG_ARCH_VIRT) += \
+ xenvm-4.2.dtb
+ dtb-$(CONFIG_ARCH_VT8500) += \
+ vt8500-bv07.dtb \
wm8505-ref.dtb \
wm8650-mid.dtb \
wm8750-apc8750.dtb \
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
- armada-385-db.dtb \
- armada-385-rd.dtb
+ armada-385-db-ap.dtb \
+ armada-388-db.dtb \
+ armada-388-gp.dtb \
+ armada-388-rd.dtb
dtb-$(CONFIG_MACH_ARMADA_XP) += \
armada-xp-axpwifiap.dtb \
armada-xp-db.dtb \
armada-xp-netgear-rn2120.dtb \
armada-xp-openblocks-ax3-4.dtb \
armada-xp-synology-ds414.dtb
- dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
+ dtb-$(CONFIG_MACH_DOVE) += \
+ dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
- dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \
+ dtb-$(CONFIG_ARCH_MEDIATEK) += \
+ mt6589-aquaris5.dtb \
mt6592-evb.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
-
endif
always := $(dtb-y)
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
};
g762: g762@3e {
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
};
g762: g762@3e {
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
};
soc {
- compatible = "marvell,armada380-mbus", "marvell,armada370-mbus",
- "simple-bus";
+ compatible = "marvell,armada380-mbus", "simple-bus";
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
status = "disabled";
};
- pinctrl {
- compatible = "marvell,mv88f6820-pinctrl";
+ pinctrl: pinctrl@18000 {
reg = <0x18000 0x20>;
+
+ ge0_rgmii_pins: ge-rgmii-pins-0 {
+ marvell,pins = "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13", "mpp14",
+ "mpp15", "mpp16", "mpp17";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge-rgmii-pins-1 {
+ marvell,pins = "mpp21", "mpp27", "mpp28",
+ "mpp29", "mpp30", "mpp31",
+ "mpp32", "mpp37", "mpp38",
+ "mpp39", "mpp40", "mpp41";
+ marvell,function = "ge1";
+ };
+
+ i2c0_pins: i2c-pins-0 {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "ge";
+ };
+
+ ref_clk0_pins: ref-clk-pins-0 {
+ marvell,pins = "mpp45";
+ marvell,function = "ref";
+ };
+
+ ref_clk1_pins: ref-clk-pins-1 {
+ marvell,pins = "mpp46";
+ marvell,function = "ref";
+ };
+
+ spi0_pins: spi-pins-0 {
+ marvell,pins = "mpp22", "mpp23", "mpp24",
+ "mpp25";
+ marvell,function = "spi0";
+ };
+
+ spi1_pins: spi-pins-1 {
+ marvell,pins = "mpp56", "mpp57", "mpp58",
+ "mpp59";
+ marvell,function = "spi1";
+ };
+
+ uart0_pins: uart-pins-0 {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "ua0";
+ };
+
+ uart1_pins: uart-pins-1 {
+ marvell,pins = "mpp19", "mpp20";
+ marvell,function = "ua1";
+ };
+
+ sdhci_pins: sdhci-pins {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp52", "mpp53", "mpp54",
+ "mpp55", "mpp57", "mpp58",
+ "mpp59";
+ marvell,function = "sd0";
+ };
+
+ sata0_pins: sata-pins-0 {
+ marvell,pins = "mpp20";
+ marvell,function = "sata0";
+ };
+
+ sata1_pins: sata-pins-1 {
+ marvell,pins = "mpp19";
+ marvell,function = "sata1";
+ };
+
+ sata2_pins: sata-pins-2 {
+ marvell,pins = "mpp47";
+ marvell,function = "sata2";
+ };
+
+ sata3_pins: sata-pins-3 {
+ marvell,pins = "mpp44";
+ marvell,function = "sata3";
+ };
};
gpio0: gpio@18100 {
status = "disabled";
};
- mdio {
+ mdio@72004 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
clocks = <&gateclk 4>;
};
+ rtc@a3800 {
+ compatible = "marvell,armada-380-rtc";
+ reg = <0xa3800 0x20>, <0x184a0 0x0c>;
+ reg-names = "rtc", "rtc-soc";
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
sata@a8000 {
compatible = "marvell,armada-380-ahci";
reg = <0xa8000 0x2000>;
*
* Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
+ isil,irq2-can-wakeup-machine;
};
/* Controller for rear fan #1 of 3 (Protechnic
};
};
+ ac97 {
+ pinctrl_ac97: ac97-0 {
+ atmel,pins =
+ <AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB12 periph A AC97FS pin */
+ AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB13 periph A AC97CK pin */
+ AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB14 periph A AC97TX pin */
+ AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB14 periph A AC97RX pin */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
status = "disabled";
};
+ ac97: sound@fffa0000 {
+ compatible = "atmel,at91sam9263-ac97c";
+ reg = <0xfffa0000 0x4000>;
+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH 5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ac97>;
+ clocks = <&ac97_clk>;
+ clock-names = "ac97_clk";
+ status = "disabled";
+ };
+
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
+ clocks = <&lcd_clk>, <&lcd_clk>;
+ clock-names = "lcdc_clk", "hclk";
status = "disabled";
};
ranges = <0 0xf7000000 0x1000000>;
interrupt-parent = <&gic>;
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
sdhci0: sdhci@ab0000 {
compatible = "mrvl,pxav3-mmc";
reg = <0xab0000 0x200>;
compatible = "mrvl,pxav3-mmc";
reg = <0xab1000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&chip CLKID_SDIO1XIN>;
+ clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clock-names = "io", "core";
status = "disabled";
};
compatible = "arm,cortex-a9-twd-timer";
reg = <0xad0600 0x20>;
clocks = <&chip CLKID_TWD>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
gic: interrupt-controller@ad1000 {
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
};
-
- gpio4: gpio@5000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0x5000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- porte: gpio-port@4 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
-
- gpio5: gpio@c000 {
- compatible = "snps,dw-apb-gpio";
- reg = <0xc000 0x400>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- portf: gpio-port@5 {
- compatible = "snps,dw-apb-gpio-port";
- gpio-controller;
- #gpio-cells = <2>;
- snps,nr-gpios = <32>;
- reg = <0>;
- };
- };
};
chip: chip-control@ea0000 {
ranges = <0 0xfc0000 0x10000>;
interrupt-parent = <&sic>;
+ sm_gpio1: gpio@5000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0x5000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ portf: gpio-port@5 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
i2c2: i2c@7000 {
compatible = "snps,designware-i2c";
#address-cells = <1>;
status = "disabled";
};
+ sm_gpio0: gpio@c000 {
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xc000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ porte: gpio-port@4 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <32>;
+ reg = <0>;
+ };
+ };
+
sysctrl: pin-controller@d000 {
compatible = "marvell,berlin2q-system-ctrl";
reg = <0xd000 0x100>;
regulator-max-microvolt = <3300000>;
};
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
+ };
+
vtt_fixed: fixedregulator-vtt {
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
};
};
};
+
+ pcf_gpio_21: gpio@21 {
+ compatible = "ti,pcf8575";
+ reg = <0x21>;
+ lines-initial-states = <0x1408>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
};
&i2c2 {
};
partition@5 {
label = "QSPI.u-boot-spl-os";
- reg = <0x00140000 0x00010000>;
+ reg = <0x00140000 0x00080000>;
};
partition@6 {
label = "QSPI.u-boot-env";
- reg = <0x00150000 0x00010000>;
+ reg = <0x001c0000 0x00010000>;
};
partition@7 {
label = "QSPI.u-boot-env.backup1";
- reg = <0x00160000 0x0010000>;
+ reg = <0x001d0000 0x0010000>;
};
partition@8 {
label = "QSPI.kernel";
- reg = <0x00170000 0x0800000>;
+ reg = <0x001e0000 0x0800000>;
};
partition@9 {
label = "QSPI.file-system";
- reg = <0x00970000 0x01690000>;
+ reg = <0x009e0000 0x01620000>;
};
};
};
+ &omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+ };
+
+ &omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+ };
+
&usb1 {
dr_mode = "peripheral";
pinctrl-names = "default";
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
- id = <1>;
ti,hwmods = "pcie1-phy";
};
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie2-phy";
- id = <2>;
status = "disabled";
};
};
tx-fifo-resize;
maximum-speed = "super-speed";
dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
};
};
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
};
};
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
+ snps,dis_u3_susphy_quirk;
+ snps,dis_u2_susphy_quirk;
};
};
reg = <0x03830000 0x100>;
clocks = <&clock_audss EXYNOS_I2S_BUS>;
clock-names = "iis";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk0";
dmas = <&pdma0 12>, <&pdma0 11>, <&pdma0 10>;
dma-names = "tx", "rx", "tx-sec";
samsung,idma-addr = <0x03000000>;
+ #sound-dai-cells = <1>;
status = "disabled";
};
compatible = "samsung,s5pv210-mipi-video-phy";
reg = <0x10020710 8>;
#phy-cells = <1>;
+ syscon = <&pmu_system_controller>;
};
pd_mfc: mfc-power-domain@10023C40 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C40 0x20>;
+ #power-domain-cells = <0>;
};
pd_g3d: g3d-power-domain@10023C60 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C60 0x20>;
+ #power-domain-cells = <0>;
};
pd_lcd0: lcd0-power-domain@10023C80 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C80 0x20>;
+ #power-domain-cells = <0>;
};
pd_tv: tv-power-domain@10023C20 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C20 0x20>;
+ #power-domain-cells = <0>;
};
pd_cam: cam-power-domain@10023C00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023C00 0x20>;
+ #power-domain-cells = <0>;
};
pd_gps: gps-power-domain@10023CE0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CE0 0x20>;
+ #power-domain-cells = <0>;
};
pd_gps_alive: gps-alive-power-domain@10023D00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023D00 0x20>;
+ #power-domain-cells = <0>;
};
gic: interrupt-controller@10490000 {
compatible = "samsung,exynos4210-mipi-dsi";
reg = <0x11C80000 0x10000>;
interrupts = <0 79 0>;
- samsung,power-domain = <&pd_lcd0>;
+ power-domains = <&pd_lcd0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM0>, <&clock CLK_SCLK_MIPI0>;
interrupts = <0 84 0>;
clocks = <&clock CLK_FIMC0>, <&clock CLK_SCLK_FIMC0>;
clock-names = "fimc", "sclk_fimc";
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
interrupts = <0 85 0>;
clocks = <&clock CLK_FIMC1>, <&clock CLK_SCLK_FIMC1>;
clock-names = "fimc", "sclk_fimc";
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
interrupts = <0 86 0>;
clocks = <&clock CLK_FIMC2>, <&clock CLK_SCLK_FIMC2>;
clock-names = "fimc", "sclk_fimc";
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
interrupts = <0 87 0>;
clocks = <&clock CLK_FIMC3>, <&clock CLK_SCLK_FIMC3>;
clock-names = "fimc", "sclk_fimc";
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
clocks = <&clock CLK_CSIS0>, <&clock CLK_SCLK_CSIS0>;
clock-names = "csis", "sclk_csis";
bus-width = <4>;
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
phys = <&mipi_phy 0>;
phy-names = "csis";
status = "disabled";
clocks = <&clock CLK_CSIS1>, <&clock CLK_SCLK_CSIS1>;
clock-names = "csis", "sclk_csis";
bus-width = <2>;
- samsung,power-domain = <&pd_cam>;
+ power-domains = <&pd_cam>;
phys = <&mipi_phy 2>;
phy-names = "csis";
status = "disabled";
};
i2s1: i2s@13960000 {
- compatible = "samsung,s5pv210-i2s";
+ compatible = "samsung,s3c6410-i2s";
reg = <0x13960000 0x100>;
clocks = <&clock CLK_I2S1>;
clock-names = "iis";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk1";
dmas = <&pdma1 12>, <&pdma1 11>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <1>;
status = "disabled";
};
i2s2: i2s@13970000 {
- compatible = "samsung,s5pv210-i2s";
+ compatible = "samsung,s3c6410-i2s";
reg = <0x13970000 0x100>;
clocks = <&clock CLK_I2S2>;
clock-names = "iis";
+ #clock-cells = <1>;
+ clock-output-names = "i2s_cdclk2";
dmas = <&pdma0 14>, <&pdma0 13>;
dma-names = "tx", "rx";
+ #sound-dai-cells = <1>;
status = "disabled";
};
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
- samsung,power-domain = <&pd_mfc>;
+ power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
clock-names = "mfc", "sclk_mfc";
status = "disabled";
interrupts = <11 0>, <11 1>, <11 2>;
clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>;
clock-names = "sclk_fimd", "fimd";
- samsung,power-domain = <&pd_lcd0>;
+ power-domains = <&pd_lcd0>;
samsung,sysreg = <&sys_reg>;
status = "disabled";
};
+
+ ppmu_dmc0: ppmu_dmc0@106a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106a0000 0x2000>;
+ clocks = <&clock CLK_PPMUDMC0>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_dmc1: ppmu_dmc1@106b0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106b0000 0x2000>;
+ clocks = <&clock CLK_PPMUDMC1>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_cpu: ppmu_cpu@106c0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106c0000 0x2000>;
+ clocks = <&clock CLK_PPMUCPU>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_acp: ppmu_acp@10ae0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106e0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_rightbus: ppmu_rightbus@112a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x112a0000 0x2000>;
+ clocks = <&clock CLK_PPMURIGHT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_leftbus: ppmu_leftbus0@116a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x116a0000 0x2000>;
+ clocks = <&clock CLK_PPMULEFT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_camif: ppmu_camif@11ac0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x11ac0000 0x2000>;
+ clocks = <&clock CLK_PPMUCAMIF>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_lcd0: ppmu_lcd0@11e40000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x11e40000 0x2000>;
+ clocks = <&clock CLK_PPMULCD0>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_fsys: ppmu_g3d@12630000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x12630000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_image: ppmu_image@12aa0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x12aa0000 0x2000>;
+ clocks = <&clock CLK_PPMUIMAGE>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_tv: ppmu_tv@12e40000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x12e40000 0x2000>;
+ clocks = <&clock CLK_PPMUTV>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_g3d: ppmu_g3d@13220000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x13220000 0x2000>;
+ clocks = <&clock CLK_PPMUG3D>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_mfc_left: ppmu_mfc_left@13660000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x13660000 0x2000>;
+ clocks = <&clock CLK_PPMUMFC_L>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_mfc_right: ppmu_mfc_right@13670000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x13670000 0x2000>;
+ clocks = <&clock CLK_PPMUMFC_R>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
};
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = &serial_2;
};
regulators {
hsotg@12480000 {
vusb_d-supply = <&vusb_reg>;
vusb_a-supply = <&vusbdac_reg>;
+ dr_mode = "peripheral";
status = "okay";
};
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rw rootwait earlyprintk panic=5 maxcpus=1";
+ stdout-path = &serial_2;
};
sysram@02020000 {
hsotg@12480000 {
vusb_d-supply = <&ldo3_reg>;
vusb_a-supply = <&ldo8_reg>;
+ dr_mode = "peripheral";
status = "okay";
};
pd_lcd1: lcd1-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
+ #power-domain-cells = <0>;
};
+ l2c: l2-cache-controller@10502000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10502000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <2 2 1>;
+ arm,data-latency = <2 2 1>;
+ };
+
gic: interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
samsung,lcd-wb;
};
};
+
+ ppmu_lcd1: ppmu_lcd1@12240000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x12240000 0x2000>;
+ clocks = <&clock CLK_PPMULCD1>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
};
* published by the Free Software Foundation.
*/
+#include <dt-bindings/sound/samsung-i2s.h>
#include <dt-bindings/input/input.h>
#include "exynos4412.dtsi"
/ {
+ chosen {
+ stdout-path = &serial_1;
+ };
+
firmware@0204F000 {
compatible = "samsung,secure-firmware";
reg = <0x0204F000 0x1000>;
pinctrl-names = "default";
status = "okay";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
- <&clock_audss EXYNOS_DOUT_AUD_BUS>;
- clock-names = "iis", "i2s_opclk0";
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
};
sound: sound {
- compatible = "samsung,odroidx2-audio";
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&max98090>;
+ compatible = "simple-audio-card";
assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
<&clock_audss EXYNOS_MOUT_I2S>,
<&clock_audss EXYNOS_DOUT_SRP>,
<0>,
<192000000>,
<19200000>;
+
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&link0_codec>;
+ simple-audio-card,frame-master = <&link0_codec>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&i2s0 0>;
+ system-clock-frequency = <19200000>;
+ };
+
+ link0_codec: simple-audio-card,codec {
+ sound-dai = <&max98090>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ };
};
mmc@12550000 {
reg = <0x10>;
interrupt-parent = <&gpx0>;
interrupts = <0 0>;
+ clocks = <&i2s0 CLK_I2S_CDCLK>;
+ clock-names = "mclk";
+ #sound-dai-cells = <0>;
};
};
};
hsotg@12480000 {
+ dr_mode = "peripheral";
status = "okay";
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
/dts-v1/;
#include "exynos4412.dtsi"
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
i2c9 = &i2c_ak8975;
i2c10 = &i2c_cm36651;
i2c11 = &i2c_max77693;
+ i2c12 = &i2c_max77693_fuel;
};
memory {
chosen {
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ stdout-path = &serial_2;
};
firmware@0204F000 {
#address-cells = <1>;
#size-cells = <0>;
- vemmc_reg: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
- enable-active-high;
- };
-
cam_io_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_A";
enable-active-high;
};
- cam_isp_core_reg: voltage-regulator-4 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_ISP_CORE_1.2V_EN";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpm0 3 0>;
- enable-active-high;
- regulator-always-on;
- };
-
ps_als_reg: voltage-regulator-5 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
};
};
+ i2c@138A0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c4_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ wm1811: wm1811@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "MCLK1";
+ DCVDD-supply = <&ldo3_reg>;
+ DBVDD1-supply = <&ldo3_reg>;
+ wlf,ldo1ena = <&gpj0 4 0>;
+ };
+ };
+
i2c@138D0000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
};
ldo2_reg: ldo2 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo3_reg: ldo3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo4_reg: ldo4 {
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo5_reg: ldo5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
- regulator-mem-on;
};
ldo6_reg: ldo6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo7_reg: ldo7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
- regulator-mem-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo8_reg: ldo8 {
regulator-name = "VMIPI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo9_reg: ldo9 {
regulator-name = "CAM_ISP_MIPI_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo10_reg: ldo10 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: ldo11 {
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: ldo12 {
regulator-name = "VUOTG_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: ldo13 {
regulator-name = "NFC_AVDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo14_reg: ldo14 {
regulator-min-microvolt = <1950000>;
regulator-max-microvolt = <1950000>;
regulator-always-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: ldo15 {
regulator-name = "VHSIC_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo16_reg: ldo16 {
regulator-name = "VHSIC_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
ldo17_reg: ldo17 {
regulator-name = "CAM_SENSOR_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-idle;
};
ldo18_reg: ldo18 {
regulator-name = "CAM_ISP_SEN_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo19_reg: ldo19 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo20_reg: ldo20 {
regulator-name = "VDDQ_PRE_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo21_reg: ldo21 {
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
+ maxim,ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
};
ldo22_reg: ldo22 {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
ldo23_reg: ldo23 {
regulator-name = "TSP_AVDD_3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
- regulator-mem-idle;
};
ldo24_reg: ldo24 {
regulator-name = "TSP_VDD_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-mem-idle;
};
ldo25_reg: ldo25 {
regulator-name = "LCD_VCC_3.3V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-mem-idle;
};
ldo26_reg: ldo26 {
regulator-name = "MOTOR_VCC_3.0V";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
- regulator-mem-idle;
};
buck1_reg: buck1 {
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: buck2 {
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
buck3_reg: buck3 {
regulator-max-microvolt = <1150000>;
regulator-always-on;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: buck4 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1150000>;
regulator-boot-on;
- regulator-mem-off;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: buck5 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+ maxim,ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};
buck9_reg: buck9 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
- regulator-mem-off;
+ maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
};
};
};
haptic-supply = <&ldo26_reg>;
pwms = <&pwm 0 38022 0>;
};
+
+ charger {
+ compatible = "maxim,max77693-charger";
+
+ maxim,constant-microvolt = <4350000>;
+ maxim,min-system-microvolt = <3600000>;
+ maxim,thermal-regulation-celsius = <100>;
+ maxim,battery-overcurrent-microamp = <3500000>;
+ maxim,charge-input-threshold-microvolt = <4300000>;
+ };
+ };
+ };
+
+ i2c_max77693_fuel: i2c-gpio-3 {
+ compatible = "i2c-gpio";
+ gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max77693-fuel-gauge@36 {
+ compatible = "maxim,max17047";
+ interrupt-parent = <&gpx2>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ reg = <0x36>;
};
};
broken-cd;
non-removable;
card-detect-delay = <200>;
- vmmc-supply = <&vemmc_reg>;
+ vmmc-supply = <&ldo22_reg>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <0>;
samsung,dw-mshc-sdr-timing = <2 3>;
status = "okay";
assigned-clocks = <&clock CLK_MOUT_CAM0>,
<&clock CLK_MOUT_CAM1>;
- assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>,
- <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-parents = <&clock CLK_XUSBXTI>,
+ <&clock CLK_XUSBXTI>;
fimc_0: fimc@11800000 {
status = "okay";
};
};
+ i2s0: i2s@03830000 {
+ pinctrl-0 = <&i2s0_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+
+ sound {
+ compatible = "samsung,trats2-audio";
+ samsung,i2s-controller = <&i2s0>;
+ samsung,model = "Trats2";
+ samsung,audio-codec = <&wm1811>;
+ samsung,audio-routing =
+ "SPK", "SPKOUTLN",
+ "SPK", "SPKOUTLP",
+ "SPK", "SPKOUTRN",
+ "SPK", "SPKOUTRP";
+ };
+
exynos-usbphy@125B0000 {
status = "okay";
};
hsotg@12480000 {
vusb_d-supply = <&ldo15_reg>;
vusb_a-supply = <&ldo12_reg>;
+ dr_mode = "peripheral";
status = "okay";
};
};
};
+ &pmu_system_controller {
+ assigned-clocks = <&pmu_system_controller 0>;
+ assigned-clock-parents = <&clock CLK_XUSBXTI>;
+ };
+
+ &ppmu_dmc0 {
+ status = "okay";
+
+ events {
+ ppmu_dmc0_3: ppmu-event3-dmc0 {
+ event-name = "ppmu-event3-dmc0";
+ };
+ };
+ };
+
+ &ppmu_dmc1 {
+ status = "okay";
+
+ events {
+ ppmu_dmc1_3: ppmu-event3-dmc1 {
+ event-name = "ppmu-event3-dmc1";
+ };
+ };
+ };
+
+ &ppmu_leftbus {
+ status = "okay";
+
+ events {
+ ppmu_leftbus_3: ppmu-event3-leftbus {
+ event-name = "ppmu-event3-leftbus";
+ };
+ };
+ };
+
+ &ppmu_rightbus {
+ status = "okay";
+
+ events {
+ ppmu_rightbus_3: ppmu-event3-rightbus {
+ event-name = "ppmu-event3-rightbus";
+ };
+ };
+ };
+
&pinctrl_0 {
pinctrl-names = "default";
pinctrl-0 = <&sleep0>;
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
+ #power-domain-cells = <0>;
};
+ l2c: l2-cache-controller@10502000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10502000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <2 2 1>;
+ arm,data-latency = <3 2 1>;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ arm,double-linefill-wrap = <1>;
+ arm,prefetch-drop = <1>;
+ arm,prefetch-offset = <7>;
+ };
+
clock: clock-controller@10030000 {
compatible = "samsung,exynos4412-clock";
reg = <0x10030000 0x20000>;
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x12390000 0x1000>;
interrupts = <0 105 0>;
- samsung,power-domain = <&pd_isp>;
+ power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>;
clock-names = "flite";
status = "disabled";
compatible = "samsung,exynos4212-fimc-lite";
reg = <0x123A0000 0x1000>;
interrupts = <0 106 0>;
- samsung,power-domain = <&pd_isp>;
+ power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE1>;
clock-names = "flite";
status = "disabled";
compatible = "samsung,exynos4212-fimc-is", "simple-bus";
reg = <0x12000000 0x260000>;
interrupts = <0 90 0>, <0 95 0>;
- samsung,power-domain = <&pd_isp>;
+ power-domains = <&pd_isp>;
clocks = <&clock CLK_FIMC_LITE0>,
<&clock CLK_FIMC_LITE1>, <&clock CLK_PPMUISPX>,
<&clock CLK_PPMUISPMX>,
<&clock CLK_DIV_ISP0>,<&clock CLK_DIV_ISP1>,
<&clock CLK_DIV_MCUISP0>,
<&clock CLK_DIV_MCUISP1>,
- <&clock CLK_SCLK_UART_ISP>,
+ <&clock CLK_UART_ISP_SCLK>,
<&clock CLK_ACLK200>, <&clock CLK_DIV_ACLK200>,
<&clock CLK_ACLK400_MCUISP>,
<&clock CLK_DIV_ACLK400_MCUISP>;
pd_gsc: gsc-power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
+ #power-domain-cells = <0>;
};
pd_mfc: mfc-power-domain@10044040 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044040 0x20>;
+ #power-domain-cells = <0>;
};
clock: clock-controller@10010000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
- samsung,power-domain = <&pd_mfc>;
+ power-domains = <&pd_mfc>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
- samsung,power-domain = <&pd_gsc>;
+ power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
- samsung,power-domain = <&pd_gsc>;
+ power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e20000 0x1000>;
interrupts = <0 87 0>;
- samsung,power-domain = <&pd_gsc>;
+ power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL2>;
clock-names = "gscl";
};
compatible = "samsung,exynos5-gsc";
reg = <0x13e30000 0x1000>;
interrupts = <0 88 0>;
- samsung,power-domain = <&pd_gsc>;
+ power-domains = <&pd_gsc>;
clocks = <&clock CLK_GSCL3>;
clock-names = "gscl";
};
dp_phy: video-phy@10040720 {
compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040720 4>;
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
};
};
- cci@10d20000 {
+ cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
interrupts = <0 96 0>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
- samsung,power-domain = <&mfc_pd>;
+ power-domains = <&mfc_pd>;
};
mmc_0: mmc@12200000 {
gsc_pd: power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
+ #power-domain-cells = <0>;
};
isp_pd: power-domain@10044020 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044020 0x20>;
+ #power-domain-cells = <0>;
};
mfc_pd: power-domain@10044060 {
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK333>,
<&clock CLK_MOUT_USER_ACLK333>;
clock-names = "oscclk", "pclk0", "clk0";
+ #power-domain-cells = <0>;
};
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
+ #power-domain-cells = <0>;
+ };
+
+ disp_pd: power-domain@100440C0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440C0 0x20>;
+ #power-domain-cells = <0>;
+ clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MOUT_SW_ACLK200>,
+ <&clock CLK_MOUT_USER_ACLK200_DISP1>,
+ <&clock CLK_MOUT_SW_ACLK300>,
+ <&clock CLK_MOUT_USER_ACLK300_DISP1>,
+ <&clock CLK_MOUT_SW_ACLK400>,
+ <&clock CLK_MOUT_USER_ACLK400_DISP1>;
+ clock-names = "oscclk", "pclk0", "clk0",
+ "pclk1", "clk1", "pclk2", "clk2";
};
pinctrl_0: pinctrl@13400000 {
};
dp_phy: video-phy@10040728 {
- compatible = "samsung,exynos5250-dp-video-phy";
- reg = <0x10040728 4>;
+ compatible = "samsung,exynos5420-dp-video-phy";
+ samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
+ power-domains = <&disp_pd>;
};
adc: adc@12D10000 {
phy = <&hdmiphy>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
+ power-domains = <&disp_pd>;
};
hdmiphy: hdmiphy@145D0000 {
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "sclk_hdmi";
+ power-domains = <&disp_pd>;
};
gsc_0: video-scaler@13e00000 {
interrupts = <0 85 0>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
- samsung,power-domain = <&gsc_pd>;
+ power-domains = <&gsc_pd>;
};
gsc_1: video-scaler@13e10000 {
interrupts = <0 86 0>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
- samsung,power-domain = <&gsc_pd>;
+ power-domains = <&gsc_pd>;
};
pmu_system_controller: system-controller@10040000 {
vpu: vpu@02040000 {
compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
- interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
- <0 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>,
+ <0 3 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "bit", "jpeg";
clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
- <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
- <&clks IMX6QDL_CLK_OCRAM>;
- clock-names = "per", "ahb", "ocram";
+ <&clks IMX6QDL_CLK_MMDC_CH0_AXI>;
+ clock-names = "per", "ahb";
resets = <&src 1>;
iram = <&ocram>;
};
pinctrl-0 = <&pinctrl_enet1>;
phy-supply = <®_enet_3v3>;
phy-mode = "rgmii";
+ phy-handle = <ðphy1>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+
+ ethphy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+ };
};
&fec2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
+ phy-handle = <ðphy2>;
status = "okay";
};
status = "okay";
};
+ &qspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qspi2>;
+ status = "okay";
+
+ flash0: s25fl128s@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+
+ flash1: s25fl128s@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl128s";
+ spi-max-frequency = <66000000>;
+ };
+ };
+
&ssi2 {
status = "okay";
};
>;
};
+ pinctrl_qspi2: qspi2grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x70f1
+ MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x70f1
+ MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x70f1
+ MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x70f1
+ MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x70f1
+ MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x70f1
+ MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x70f1
+ MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x70f1
+ MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x70f1
+ MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x70f1
+ MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x70f1
+ MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x70f1
+ >;
+ };
+
pinctrl_vcc_sd3: vccsd3grp {
fsl,pins = <
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
regulator-name = "V28";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on; /* due battery cover sensor */
+ regulator-always-on; /* due to battery cover sensor */
};
&vaux2 {
regulator-name = "VIO";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
-
};
&vintana1 {
};
};
+ /* Ethernet is on some early development boards and qemu */
ethernet@gpmc {
compatible = "smsc,lan91c94";
-
- status = "disabled";
-
interrupt-parent = <&gpio2>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
reg = <1 0x300 0xf>; /* 16 byte IO range at offset 0x300 */
compatible = "renesas,lager", "renesas,r8a7790";
aliases {
- serial6 = &scifa0;
- serial7 = &scifa1;
+ serial0 = &scifa0;
+ serial1 = &scifa1;
};
chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
stdout-path = &scifa0;
};
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&mmcif1 {
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
m25p,fast-read;
partition@0 {
};
&iic0 {
- status = "ok";
+ status = "okay";
};
&iic1 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic1_pins>;
pinctrl-names = "default";
};
&iic2 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
pinctrl-0 = <&vin1_pins>;
pinctrl-names = "default";
- status = "ok";
+ status = "okay";
port {
#address-cells = <1>;
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
+ /* Single DAI */
#sound-dai-cells = <0>;
status = "okay";
compatible = "renesas,koelsch", "renesas,r8a7791";
aliases {
- serial6 = &scif0;
- serial7 = &scif1;
+ serial0 = &scif0;
+ serial1 = &scif1;
};
chosen {
phy-handle = <&phy1>;
renesas,ether-link-active-low;
- status = "ok";
+ status = "okay";
phy1: ethernet-phy@1 {
reg = <1>;
};
&cmt0 {
- status = "ok";
+ status = "okay";
};
&sata0 {
spi-max-frequency = <30000000>;
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
+ spi-cpha;
+ spi-cpol;
m25p,fast-read;
partition@0 {
read-only;
};
partition@80000 {
- label = "bootenv";
- reg = <0x00080000 0x00080000>;
+ label = "user";
+ reg = <0x00080000 0x00580000>;
read-only;
};
- partition@100000 {
- label = "data";
- reg = <0x00100000 0x03f00000>;
+ partition@600000 {
+ label = "flash";
+ reg = <0x00600000 0x03a00000>;
};
};
};
/* composite video input */
&vin1 {
- status = "ok";
+ status = "okay";
pinctrl-0 = <&vin1_pins>;
pinctrl-names = "default";
pinctrl-0 = <&sound_pins &sound_clk_pins>;
pinctrl-names = "default";
+ /* Single DAI */
#sound-dai-cells = <0>;
status = "okay";
/ {
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
+
+ ext_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "ext_gmac";
+ #clock-cells = <0>;
+ };
};
&cpu0 {
&i2c0 {
clock-frequency = <400000>;
- status = "okay";
rk808: pmic@1b {
compatible = "rockchip,rk808";
interrupt-parent = <&gpio0>;
interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
- pinctrl-0 = <&pmic_int>;
+ pinctrl-0 = <&pmic_int &global_pwroff>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_gpu: DCDC_REG2 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <1250000>;
regulator-name = "vdd_gpu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc_ddr: DCDC_REG3 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_ddr";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_io: DCDC_REG4 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_io";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vccio_pmu: LDO_REG1 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_pmu";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vcc_tp: LDO_REG2 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc_tp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
vdd_10: LDO_REG3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd_10";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc18_lcd: LDO_REG4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc18_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
};
vccio_sd: LDO_REG5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vdd10_lcd: LDO_REG6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-name = "vdd10_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
+ };
};
vcc_18: LDO_REG7 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_18";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
};
vcca_codec: LDO_REG8 {
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcca_codec";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
};
vcc_wl: SWITCH_REG1 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_wl";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
vcc_lcd: SWITCH_REG2 {
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_lcd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
};
};
};
+
+&gmac {
+ phy-supply = <&vcc_phy>;
+ phy-mode = "rgmii";
+ clock_in_out = "input";
+ snps,reset-gpio = <&gpio4 7 0>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 1000000>;
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&ext_gmac>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ tx_delay = <0x30>;
+ rx_delay = <0x10>;
+ status = "ok";
+};
regulator-always-on;
regulator-boot-on;
};
+
+ vcc_phy: vcc-phy-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <ð_phy_pwr>;
+ regulator-name = "vcc_phy";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
&emmc {
status = "okay";
};
+ &hdmi {
+ ddc-i2c-bus = <&i2c5>;
+ status = "okay";
+ };
+
&sdmmc {
bus-width = <4>;
cap-mmc-highspeed;
status = "okay";
};
+ &i2c5 {
+ status = "okay";
+ };
+
&wdt {
status = "okay";
};
};
&pinctrl {
+ pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
+ drive-strength = <8>;
+ };
+
+ pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
+ bias-pull-up;
+ drive-strength = <8>;
+ };
+
backlight {
bl_en: bl-en {
rockchip,pins = <7 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+ sdmmc {
+ /*
+ * Default drive strength isn't enough to achieve even
+ * high-speed mode on EVB board so bump up to 8ma.
+ */
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 17 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 18 RK_FUNC_1 &pcfg_pull_up_drv_8ma>,
+ <6 19 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up_drv_8ma>;
+ };
+ };
+
usb {
host_vbus_drv: host-vbus-drv {
rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ eth_phy {
+ eth_phy_pwr: eth-phy-pwr {
+ rockchip,pins = <0 6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};
&usb_host0_ehci {
&usb_host1 {
status = "okay";
};
+
+ &vopb {
+ status = "okay";
+ };
+
+ &vopb_mmu {
+ status = "okay";
+ };
+
+ &vopl {
+ status = "okay";
+ };
+
+ &vopl_mmu {
+ status = "okay";
+ };
clock-frequency = <24000000>;
};
+ timer: timer@ff810000 {
+ compatible = "rockchip,rk3288-timer";
+ reg = <0xff810000 0x20>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&xin24m>, <&cru PCLK_TIMER>;
+ clock-names = "timer", "pclk";
+ };
+
+ display-subsystem {
+ compatible = "rockchip,display-subsystem";
+ ports = <&vopl_out>, <&vopb_out>;
+ };
+
sdmmc: dwmmc@ff0c0000 {
compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
sdio0: dwmmc@ff0d0000 {
compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDIO0>, <&cru SCLK_SDIO0>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
sdio1: dwmmc@ff0e0000 {
compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_SDIO1>, <&cru SCLK_SDIO1>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
emmc: dwmmc@ff0f0000 {
compatible = "rockchip,rk3288-dw-mshc";
+ clock-freq-min-max = <400000 150000000>;
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
clock-names = "biu", "ciu";
fifo-depth = <0x100>;
status = "disabled";
};
+ gmac: ethernet@ff290000 {
+ compatible = "rockchip,rk3288-gmac";
+ reg = <0xff290000 0x10000>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ rockchip,grf = <&grf>;
+ clocks = <&cru SCLK_MAC>,
+ <&cru SCLK_MAC_RX>, <&cru SCLK_MAC_TX>,
+ <&cru SCLK_MACREF>, <&cru SCLK_MACREF_OUT>,
+ <&cru ACLK_GMAC>, <&cru PCLK_GMAC>;
+ clock-names = "stmmaceth",
+ "mac_clk_rx", "mac_clk_tx",
+ "clk_mac_ref", "clk_mac_refout",
+ "aclk_mac", "pclk_mac";
+ };
+
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
};
};
+ sram@ff720000 {
+ compatible = "rockchip,rk3288-pmu-sram", "mmio-sram";
+ reg = <0xff720000 0x1000>;
+ };
+
pmu: power-management@ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon";
reg = <0xff730000 0x100>;
wdt: watchdog@ff800000 {
compatible = "rockchip,rk3288-wdt", "snps,dw-wdt";
reg = <0xff800000 0x100>;
+ clocks = <&cru PCLK_WDT>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
status = "disabled";
};
+ vopb: vop@ff930000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff930000 0x19c>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopb_mmu>;
+ status = "disabled";
+
+ vopb_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopb_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vopb>;
+ };
+ };
+ };
+
vopb_mmu: iommu@ff930300 {
compatible = "rockchip,iommu";
reg = <0xff930300 0x100>;
status = "disabled";
};
+ vopl: vop@ff940000 {
+ compatible = "rockchip,rk3288-vop";
+ reg = <0xff940000 0x19c>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
+ clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
+ resets = <&cru SRST_LCDC1_AXI>, <&cru SRST_LCDC1_AHB>, <&cru SRST_LCDC1_DCLK>;
+ reset-names = "axi", "ahb", "dclk";
+ iommus = <&vopl_mmu>;
+ status = "disabled";
+
+ vopl_out: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vopl_out_hdmi: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_in_vopl>;
+ };
+ };
+ };
+
vopl_mmu: iommu@ff940300 {
compatible = "rockchip,iommu";
reg = <0xff940300 0x100>;
status = "disabled";
};
+ hdmi: hdmi@ff980000 {
+ compatible = "rockchip,rk3288-dw-hdmi";
+ reg = <0xff980000 0x20000>;
+ reg-io-width = <4>;
+ rockchip,grf = <&grf>;
+ interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>;
+ clock-names = "iahb", "isfr";
+ status = "disabled";
+
+ ports {
+ hdmi_in: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hdmi_in_vopb: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&vopb_out_hdmi>;
+ };
+ hdmi_in_vopl: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&vopl_out_hdmi>;
+ };
+ };
+ };
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
bias-disable;
};
+ pcfg_pull_none_12ma: pcfg-pull-none-12ma {
+ bias-disable;
+ drive-strength = <12>;
+ };
+
+ sleep {
+ global_pwroff: global-pwroff {
+ rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ ddrio_pwroff: ddrio-pwroff {
+ rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>;
+ };
+
+ ddr0_retention: ddr0-retention {
+ rockchip,pins = <0 2 RK_FUNC_1 &pcfg_pull_up>;
+ };
+
+ ddr1_retention: ddr1-retention {
+ rockchip,pins = <0 3 RK_FUNC_1 &pcfg_pull_up>;
+ };
+ };
+
i2c0 {
i2c0_xfer: i2c0-xfer {
rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>,
rockchip,pins = <7 23 3 &pcfg_pull_none>;
};
};
+
+ gmac {
+ rgmii_pins: rgmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 26 3 &pcfg_pull_none>,
+ <3 27 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none_12ma>,
+ <3 29 3 &pcfg_pull_none_12ma>,
+ <3 24 3 &pcfg_pull_none_12ma>,
+ <3 25 3 &pcfg_pull_none_12ma>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 6 3 &pcfg_pull_none>,
+ <4 9 3 &pcfg_pull_none_12ma>,
+ <4 4 3 &pcfg_pull_none_12ma>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+
+ rmii_pins: rmii-pins {
+ rockchip,pins = <3 30 3 &pcfg_pull_none>,
+ <3 31 3 &pcfg_pull_none>,
+ <3 28 3 &pcfg_pull_none>,
+ <3 29 3 &pcfg_pull_none>,
+ <4 0 3 &pcfg_pull_none>,
+ <4 5 3 &pcfg_pull_none>,
+ <4 4 3 &pcfg_pull_none>,
+ <4 1 3 &pcfg_pull_none>,
+ <4 2 3 &pcfg_pull_none>,
+ <4 3 3 &pcfg_pull_none>;
+ };
+ };
};
};
*/
i2c0: i2c@f0014000 {
wm8904: wm8904@1a {
- compatible = "wm8904";
+ compatible = "wlf,wm8904";
reg = <0x1a>;
clocks = <&pck0>;
clock-names = "mclk";
"Headphone Jack", "HPOUTR",
"IN2L", "Line In Jack",
"IN2R", "Line In Jack",
- "MICBIAS", "IN1L",
+ "Mic", "MICBIAS",
"IN1L", "Mic";
atmel,ssc-controller = <&ssc0>;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
+ gpio3 = &pioD;
gpio4 = &pioE;
tcb0 = &tcb0;
tcb1 = &tcb1;
};
nand0: nand@80000000 {
- compatible = "atmel,at91rm9200-nand";
+ compatible = "atmel,sama5d4-nand", "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
ranges;
pit: timer@fc068630 {
compatible = "atmel,at91sam9260-pit";
- reg = <0xfc068630 0xf>;
+ reg = <0xfc068630 0x10>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
clocks = <&h32ck>;
};
clocks = <&pioC_clk>;
};
+ pioD: gpio@fc068000 {
+ compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
+ reg = <0xfc068000 0x100>;
+ interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pioD_clk>;
+ status = "disabled";
+ };
+
pioE: gpio@fc06d000 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfc06d000 0x100>;
* http://www.gnu.org/copyleft/gpl.html
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/thermal/thermal.h>
+
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
aliases {
ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- serial6 = &uart6;
- serial7 = &uart7;
};
chosen {
<&ahb_gates 44>, <&ahb_gates 46>;
status = "disabled";
};
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>,
+ <&ahb_gates 46>;
+ status = "disabled";
+ };
+
+ framebuffer@3 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_fe0-de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>, <&ahb_gates 46>;
+ status = "disabled";
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1056000 1500000
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <4>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <850000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <50>;
clocks = <&ahb_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 31>, <&dma 1 30>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+ <&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_b: uart0@1 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_a: uart1@0 {
allwinner,pins = "PA10", "PA11";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pins = "PH1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
ir0_pins_a: ir0@0 {
allwinner,pins = "PB3","PB4";
allwinner,function = "ir0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_pins_a: ir1@0 {
allwinner,pins = "PB22","PB23";
allwinner,function = "ir1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi0_pins_a: spi0@0 {
+ allwinner,pins = "PI10", "PI11", "PI12", "PI13";
+ allwinner,function = "spi0";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi1_pins_a: spi1@0 {
+ allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+ allwinner,function = "spi1";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_pins_a: spi2@0 {
+ allwinner,pins = "PB14", "PB15", "PB16", "PB17";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ spi2_pins_b: spi2@1 {
+ allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+ allwinner,function = "spi2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps20_pins_a: ps20@0 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps21_pins_a: ps21@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
status = "disabled";
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
#address-cells = <1>;
#size-cells = <0>;
};
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <62>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <63>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
+ };
};
};
*/
/dts-v1/;
- /include/ "sun5i-a10s.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun5i-a10s.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A10s-Olinuxino Micro";
compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ };
+
soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 1 0>; /* PG1 */
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
cd-inverted;
status = "okay";
};
pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 13 0>; /* PG13 */
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
allwinner,pins = "PG1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
allwinner,pins = "PG13";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PE3";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
allwinner,pins = "PB10";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
};
};
green {
label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 0>;
+ gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
- gpio = <&pio 1 10 0>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* http://www.gnu.org/copyleft/gpl.html
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
aliases {
ethernet0 = &emac;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
};
chosen {
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
};
cpus {
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
uart0_pins_a: uart0@0 {
allwinner,pins = "PB19", "PB20";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PC18", "PC19";
allwinner,function = "uart2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG9", "PG10";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG3","PG4","PG5","PG6","PG7","PG8";
allwinner,function = "mmc1";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg = <0x01c20c90 0x10>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
*/
/dts-v1/;
- /include/ "sun5i-a13.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun5i-a13.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "HSG H702";
compatible = "hsg,h702", "allwinner,sun5i-a13";
+ aliases {
+ serial0 = &uart1;
+ };
+
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
usbphy: phy@01c13400 {
- /*
- * There doesn't seem to be a GPIO for controlling
- * usb1 vbus, despite the fex file saying otherwise.
- */
- usb1_vbus-supply = <®_vcc5v0>;
+ usb1_vbus-supply = <®_ldo3>;
status = "okay";
};
mmc0_cd_pin_h702: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
};
status = "okay";
axp209: pmic@34 {
- compatible = "x-powers,axp209";
reg = <0x34>;
interrupts = <0>;
- interrupt-controller;
- #interrupt-cells = <1>;
};
};
};
};
};
+
+ #include "axp209.dtsi"
+
+ &cpu0 {
+ cpu-supply = <®_dcdc2>;
+ };
+
+ ®_dcdc2 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-name = "vdd-cpu";
+ };
+
+ ®_dcdc3 {
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-name = "vdd-int-dll";
+ };
+
+ ®_ldo1 {
+ regulator-name = "vdd-rtc";
+ };
+
+ ®_ldo2 {
+ regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-name = "avcc";
+ };
+
+ ®_ldo3 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc-wifi";
+ };
*/
/dts-v1/;
- /include/ "sun5i-a13.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun5i-a13.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino Micro";
compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13";
+ aliases {
+ serial0 = &uart1;
+ };
+
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxinom: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxinom: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxinom: usb1_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
power {
label = "a13-olinuxino-micro:green:power";
- gpios = <&pio 6 9 0>;
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxinom>;
- gpio = <&pio 6 11 0>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
*/
/dts-v1/;
- /include/ "sun5i-a13.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun5i-a13.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A13-Olinuxino";
compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13";
+ aliases {
+ serial0 = &uart1;
+ };
+
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 6 0 0>; /* PG0 */
+ cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_olinuxino: mmc0_cd_pin@0 {
allwinner,pins = "PG0";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_olinuxino: usb1_vbus_pin@0 {
allwinner,pins = "PG11";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
};
};
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
i2c1: i2c@01c2b000 {
pinctrl-0 = <&led_pins_olinuxino>;
power {
- gpios = <&pio 6 9 0>;
+ gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_olinuxino>;
- gpio = <&pio 6 11 0>;
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>;
status = "okay";
};
};
* http://www.gnu.org/copyleft/gpl.html
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/thermal/thermal.h>
+
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&intc>;
- aliases {
- serial0 = &uart1;
- serial1 = &uart3;
- };
-
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1104000 1500000
+ 1008000 1400000
+ 912000 1350000
+ 864000 1300000
+ 624000 1200000
+ 576000 1200000
+ 432000 1200000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <6>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <850000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
};
interrupts = <10>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <11>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
interrupts = <12>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
uart1_pins_a: uart1@0 {
allwinner,pins = "PE10", "PE11";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart1_pins_b: uart1@1 {
allwinner,pins = "PG3", "PG4";
allwinner,function = "uart1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB15", "PB16";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB17", "PB18";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
reg = <0x01c20c90 0x10>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <31>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun4i-a10-sid";
reg = <0x01c23800 0x10>;
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
interrupts = <29>;
+ #thermal-sensor-cells = <0>;
};
uart1: serial@01c28400 {
* OTHER DEALINGS IN THE SOFTWARE.
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
ethernet0 = &gmac;
};
clocks = <&pll6 0>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <24000000>;
+ arm,cpu-registers-not-fw-configured;
};
cpus {
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
- interrupts = <0 120 4>,
- <0 121 4>,
- <0 122 4>,
- <0 123 4>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
dma: dma-controller@01c02000 {
compatible = "allwinner,sun6i-a31-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 8>;
reset-names = "ahb";
- interrupts = <0 60 4>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 9>;
reset-names = "ahb";
- interrupts = <0 61 4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 10>;
reset-names = "ahb";
- interrupts = <0 62 4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 11>;
reset-names = "ahb";
- interrupts = <0 63 4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ehci0: usb@01c1a000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1a000 0x100>;
- interrupts = <0 72 4>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 26>;
resets = <&ahb1_rst 26>;
phys = <&usbphy 1>;
ohci0: usb@01c1a400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1a400 0x100>;
- interrupts = <0 73 4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 29>, <&usb_clk 16>;
resets = <&ahb1_rst 29>;
phys = <&usbphy 1>;
ehci1: usb@01c1b000 {
compatible = "allwinner,sun6i-a31-ehci", "generic-ehci";
reg = <0x01c1b000 0x100>;
- interrupts = <0 74 4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 27>;
resets = <&ahb1_rst 27>;
phys = <&usbphy 2>;
ohci1: usb@01c1b400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1b400 0x100>;
- interrupts = <0 75 4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 30>, <&usb_clk 17>;
resets = <&ahb1_rst 30>;
phys = <&usbphy 2>;
ohci2: usb@01c1c400 {
compatible = "allwinner,sun6i-a31-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
- interrupts = <0 77 4>;
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 31>, <&usb_clk 18>;
resets = <&ahb1_rst 31>;
status = "disabled";
pio: pinctrl@01c20800 {
compatible = "allwinner,sun6i-a31-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 16 4>,
- <0 17 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
uart0_pins_a: uart0@0 {
allwinner,pins = "PH20", "PH21";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH14", "PH15";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PH16", "PH17";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PH18", "PH19";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
"PA20", "PA21", "PA22", "PA23",
"PA24", "PA26", "PA27";
allwinner,function = "gmac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_gmii_a: gmac_gmii@0 {
* data lines in GMII mode run at 125MHz and
* might need a higher signal drive strength
*/
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <3>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>,
- <0 20 4>,
- <0 21 4>,
- <0 22 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
reg = <0x01c20ca0 0x20>;
};
+ rtp: rtp@01c25000 {
+ compatible = "allwinner,sun6i-a31-ts";
+ reg = <0x01c25000 0x100>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
+ };
+
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 21>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
status = "disabled";
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 3>;
resets = <&apb2_rst 3>;
status = "disabled";
gmac: ethernet@01c30000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c30000 0x1054>;
- interrupts = <0 82 4>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb1_gates 17>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
timer@01c60000 {
compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
- interrupts = <0 51 4>,
- <0 52 4>,
- <0 53 4>,
- <0 54 4>;
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 19>;
resets = <&ahb1_rst 19>;
};
spi0: spi@01c68000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c68000 0x1000>;
- interrupts = <0 65 4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
spi1: spi@01c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
- interrupts = <0 66 4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 24>, <&dma 24>;
spi2: spi@01c6a000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6a000 0x1000>;
- interrupts = <0 67 4>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 25>, <&dma 25>;
spi3: spi@01c6b000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c6b000 0x1000>;
- interrupts = <0 68 4>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
dmas = <&dma 26>, <&dma 26>;
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
- interrupts = <0 40 4>, <0 41 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
nmi_intc: interrupt-controller@01f00c0c {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01f00c0c 0x38>;
- interrupts = <0 32 4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
"apb0_i2c";
};
+ ir_clk: ir_clk {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ clocks = <&osc32k>, <&osc24M>;
+ clock-output-names = "ir";
+ };
+
apb0_rst: apb0_rst {
compatible = "allwinner,sun6i-a31-clock-reset";
#reset-cells = <1>;
reg = <0x01f01c00 0x300>;
};
+ ir: ir@01f02000 {
+ compatible = "allwinner,sun5i-a13-ir";
+ clocks = <&apb0_gates 1>, <&ir_clk>;
+ clock-names = "apb", "ir";
+ resets = <&apb0_rst 1>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x01f02000 0x40>;
+ status = "disabled";
+ };
+
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun6i-a31-r-pinctrl";
reg = <0x01f02c00 0x400>;
- interrupts = <0 45 4>,
- <0 46 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_rst 0>;
gpio-controller;
#interrupt-cells = <2>;
#size-cells = <0>;
#gpio-cells = <3>;
+
+ ir_pins_a: ir@0 {
+ allwinner,pins = "PL4";
+ allwinner,function = "s_ir";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
};
};
};
*/
/dts-v1/;
- /include/ "sun7i-a20.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun7i-a20.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "LeMaker Banana Pi";
compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart3;
+ serial2 = &uart7;
+ };
+
soc@01c00000 {
spi0: spi@01c05000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 10 0>; /* PH10 */
+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
cd-inverted;
status = "okay";
};
mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
allwinner,pins = "PH10";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
gmac_power_pin_bananapi: gmac_power_pin@0 {
allwinner,pins = "PH23";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
led_pins_bananapi: led_pins@0 {
allwinner,pins = "PH24";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "bananapi:green:usr";
- gpios = <&pio 7 24 0>;
+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
};
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
- gpio = <&pio 7 23 0>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
*/
/dts-v1/;
- /include/ "sun7i-a20.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun7i-a20.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A20 Hummingbird";
compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart2;
+ serial2 = &uart3;
+ serial3 = &uart4;
+ serial4 = &uart5;
+ };
+
soc@01c00000 {
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v0>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
ahci_pwr_pin_a20_hummingbird: ahci_pwr_pin@0 {
allwinner,pins = "PH15";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
usb1_vbus_pin_a20_hummingbird: usb1_vbus_pin@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc3_vdd_pin_a20_hummingbird: mmc3_vdd_pin@0 {
allwinner,pins = "PH9";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_vdd_pin_a20_hummingbird: gmac_vdd_pin@0 {
allwinner,pins = "PH16";
allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
};
phy-mode = "rgmii";
phy-supply = <®_gmac_vdd>;
/* phy reset config */
- snps,reset-gpio = <&pio 0 17 0>; /* PA17 */
+ snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */
snps,reset-active-low;
/* wait 1s after reset, otherwise fail to read phy id */
snps,reset-delays-us = <0 10000 1000000>;
reg_ahci_5v: ahci-5v {
pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>;
- gpio = <&pio 7 15 0>; /* PH15 */
+ gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */
status = "okay";
};
reg_usb1_vbus: usb1-vbus {
pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>;
- gpio = <&pio 7 2 0>; /* PH2 */
+ gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
status = "okay";
};
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 9 0>; /* PH9 */
+ gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
};
reg_gmac_vdd: gmac_vdd {
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
enable-active-high;
- gpio = <&pio 7 16 0>; /* PH16 */
+ gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */
};
};
*/
/dts-v1/;
- /include/ "sun7i-a20.dtsi"
- /include/ "sunxi-common-regulators.dtsi"
+ #include "sun7i-a20.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Olimex A20-Olinuxino Micro";
compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
aliases {
+ serial0 = &uart0;
+ serial1 = &uart6;
+ serial2 = &uart7;
spi0 = &spi1;
spi1 = &spi2;
};
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
cd-inverted;
status = "okay";
};
pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>;
vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
- cd-gpios = <&pio 7 11 0>; /* PH11 */
+ cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
cd-inverted;
status = "okay";
};
mmc3_cd_pin_olinuxinom: mmc3_cd_pin@0 {
allwinner,pins = "PH11";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PH2";
allwinner,function = "gpio_out";
- allwinner,drive = <1>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ lradc: lradc@01c22800 {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
+
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
+
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
+
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
+ };
+
+ button@795 {
+ label = "Search";
+ linux,code = <KEY_SEARCH>;
+ channel = <0>;
+ voltage = <795090>;
+ };
+
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+
+ button@1184 {
+ label = "Esc";
+ linux,code = <KEY_ESC>;
+ channel = <0>;
+ voltage = <1184678>;
+ };
+
+ button@1398 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <1398804>;
};
};
compatible = "x-powers,axp209";
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
- interrupts = <0 8>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
green {
label = "a20-olinuxino-micro:green:usr";
- gpios = <&pio 7 2 0>;
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/thermal/thermal.h>
+
+ #include <dt-bindings/dma/sun4i-a10.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
aliases {
ethernet0 = &gmac;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- serial6 = &uart6;
- serial7 = &uart7;
};
chosen {
<&ahb_gates 44>;
status = "disabled";
};
+
+ framebuffer@1 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 44>;
+ status = "disabled";
+ };
+
+ framebuffer@2 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-tve0";
+ clocks = <&pll5 1>, <&ahb_gates 34>, <&ahb_gates 36>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1450000
+ 960000 1400000
+ 912000 1400000
+ 864000 1300000
+ 720000 1200000
+ 528000 1100000
+ 312000 1000000
+ 144000 900000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <7>;
};
cpu@1 {
};
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
timer {
compatible = "arm,armv7-timer";
- interrupts = <1 13 0xf08>,
- <1 14 0xf08>,
- <1 11 0xf08>,
- <1 10 0xf08>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
pmu {
compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
- interrupts = <0 120 4>,
- <0 121 4>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
};
clocks {
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x01c00030 0x0c>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
};
dma: dma-controller@01c02000 {
compatible = "allwinner,sun4i-a10-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 27 4>;
+ interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 6>;
#dma-cells = <2>;
};
spi0: spi@01c05000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c05000 0x1000>;
- interrupts = <0 10 4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 20>, <&spi0_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 27>, <&dma 1 26>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 27>,
+ <&dma SUN4I_DMA_DEDICATED 26>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
spi1: spi@01c06000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c06000 0x1000>;
- interrupts = <0 11 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 9>, <&dma 1 8>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 9>,
+ <&dma SUN4I_DMA_DEDICATED 8>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
emac: ethernet@01c0b000 {
compatible = "allwinner,sun4i-a10-emac";
reg = <0x01c0b000 0x1000>;
- interrupts = <0 55 4>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 17>;
status = "disabled";
};
- mdio@01c0b080 {
+ mdio: mdio@01c0b080 {
compatible = "allwinner,sun4i-a10-mdio";
reg = <0x01c0b080 0x14>;
status = "disabled";
reg = <0x01c0f000 0x1000>;
clocks = <&ahb_gates 8>, <&mmc0_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 32 4>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c10000 0x1000>;
clocks = <&ahb_gates 9>, <&mmc1_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 33 4>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c11000 0x1000>;
clocks = <&ahb_gates 10>, <&mmc2_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 34 4>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
reg = <0x01c12000 0x1000>;
clocks = <&ahb_gates 11>, <&mmc3_clk>;
clock-names = "ahb", "mmc";
- interrupts = <0 35 4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ehci0: usb@01c14000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c14000 0x100>;
- interrupts = <0 39 4>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 1>;
phys = <&usbphy 1>;
phy-names = "usb";
ohci0: usb@01c14400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c14400 0x100>;
- interrupts = <0 64 4>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 6>, <&ahb_gates 2>;
phys = <&usbphy 1>;
phy-names = "usb";
spi2: spi@01c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
- interrupts = <0 12 4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 22>, <&spi2_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 29>, <&dma 1 28>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 29>,
+ <&dma SUN4I_DMA_DEDICATED 28>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
ahci: sata@01c18000 {
compatible = "allwinner,sun4i-a10-ahci";
reg = <0x01c18000 0x1000>;
- interrupts = <0 56 4>;
+ interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&pll6 0>, <&ahb_gates 25>;
status = "disabled";
};
ehci1: usb@01c1c000 {
compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
reg = <0x01c1c000 0x100>;
- interrupts = <0 40 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 3>;
phys = <&usbphy 2>;
phy-names = "usb";
ohci1: usb@01c1c400 {
compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
reg = <0x01c1c400 0x100>;
- interrupts = <0 65 4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&usb_clk 7>, <&ahb_gates 4>;
phys = <&usbphy 2>;
phy-names = "usb";
spi3: spi@01c1f000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c1f000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 23>, <&spi3_clk>;
clock-names = "ahb", "mod";
- dmas = <&dma 1 31>, <&dma 1 30>;
+ dmas = <&dma SUN4I_DMA_DEDICATED 31>,
+ <&dma SUN4I_DMA_DEDICATED 30>;
dma-names = "rx", "tx";
status = "disabled";
#address-cells = <1>;
pio: pinctrl@01c20800 {
compatible = "allwinner,sun7i-a20-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 28 4>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
pwm0_pins_a: pwm0@0 {
allwinner,pins = "PB2";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
pwm1_pins_a: pwm1@0 {
allwinner,pins = "PI3";
allwinner,function = "pwm";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PB22", "PB23";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart2_pins_a: uart2@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "uart2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_a: uart3@0 {
allwinner,pins = "PG6", "PG7", "PG8", "PG9";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart3_pins_b: uart3@1 {
allwinner,pins = "PH0", "PH1";
allwinner,function = "uart3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "uart4";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart5_pins_a: uart5@0 {
allwinner,pins = "PI10", "PI11";
allwinner,function = "uart5";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart6_pins_a: uart6@0 {
allwinner,pins = "PI12", "PI13";
allwinner,function = "uart6";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart7_pins_a: uart7@0 {
allwinner,pins = "PI20", "PI21";
allwinner,function = "uart7";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PB0", "PB1";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PB18", "PB19";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PB20", "PB21";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PI0", "PI1";
allwinner,function = "i2c3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
emac_pins_a: emac0@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "emac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_a_pins_a: clk_out_a@0 {
allwinner,pins = "PI12";
allwinner,function = "clk_out_a";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
clk_out_b_pins_a: clk_out_b@0 {
allwinner,pins = "PI13";
allwinner,function = "clk_out_b";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_mii_a: gmac_mii@0 {
"PA11", "PA12", "PA13", "PA14",
"PA15", "PA16";
allwinner,function = "gmac";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
gmac_pins_rgmii_a: gmac_rgmii@0 {
* data lines in RGMII mode use DDR mode
* and need a higher signal drive strength
*/
- allwinner,drive = <3>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_40_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi0_pins_a: spi0@0 {
allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
allwinner,function = "spi0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi1_pins_a: spi1@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "spi1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_a: spi2@0 {
allwinner,pins = "PC19", "PC20", "PC21", "PC22";
allwinner,function = "spi2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
spi2_pins_b: spi2@1 {
allwinner,pins = "PB14", "PB15", "PB16", "PB17";
allwinner,function = "spi2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
allwinner,pins = "PH1";
allwinner,function = "gpio_in";
- allwinner,drive = <0>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc2_pins_a: mmc2@0 {
allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
allwinner,function = "mmc2";
- allwinner,drive = <2>;
- allwinner,pull = <1>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
mmc3_pins_a: mmc3@0 {
allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
allwinner,function = "mmc3";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir0_pins_a: ir0@0 {
allwinner,pins = "PB3","PB4";
allwinner,function = "ir0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
ir1_pins_a: ir1@0 {
allwinner,pins = "PB22","PB23";
allwinner,function = "ir1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps20_pins_a: ps20@0 {
+ allwinner,pins = "PI20", "PI21";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ ps21_pins_a: ps21@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "ps2";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
- interrupts = <0 22 4>,
- <0 23 4>,
- <0 24 4>,
- <0 25 4>,
- <0 67 4>,
- <0 68 4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
rtc: rtc@01c20d00 {
compatible = "allwinner,sun7i-a20-rtc";
reg = <0x01c20d00 0x20>;
- interrupts = <0 24 4>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
};
pwm: pwm@01c20e00 {
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 6>, <&ir0_clk>;
clock-names = "apb", "ir";
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21800 0x40>;
status = "disabled";
};
compatible = "allwinner,sun4i-a10-ir";
clocks = <&apb0_gates 7>, <&ir1_clk>;
clock-names = "apb", "ir";
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x01c21c00 0x40>;
status = "disabled";
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
sid: eeprom@01c23800 {
compatible = "allwinner,sun7i-a20-sid";
reg = <0x01c23800 0x200>;
rtp: rtp@01c25000 {
compatible = "allwinner,sun4i-a10-ts";
reg = <0x01c25000 0x100>;
- interrupts = <0 29 4>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <0>;
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 17 4>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@01c29400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29400 0x400>;
- interrupts = <0 18 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
uart6: serial@01c29800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29800 0x400>;
- interrupts = <0 19 4>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 22>;
uart7: serial@01c29c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29c00 0x400>;
- interrupts = <0 20 4>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 23>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
status = "disabled";
#address-cells = <1>;
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
status = "disabled";
#address-cells = <1>;
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
status = "disabled";
#address-cells = <1>;
i2c3: i2c@01c2b800 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2b800 0x400>;
- interrupts = <0 88 4>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
status = "disabled";
#address-cells = <1>;
i2c4: i2c@01c2c000 {
compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
reg = <0x01c2c000 0x400>;
- interrupts = <0 89 4>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 15>;
status = "disabled";
#address-cells = <1>;
gmac: ethernet@01c50000 {
compatible = "allwinner,sun7i-a20-gmac";
reg = <0x01c50000 0x10000>;
- interrupts = <0 85 4>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "macirq";
clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
clock-names = "stmmaceth", "allwinner_gmac_tx";
hstimer@01c60000 {
compatible = "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
- interrupts = <0 81 4>,
- <0 82 4>,
- <0 83 4>,
- <0 84 4>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb_gates 28>;
};
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ ps20: ps2@01c2a000 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a000 0x400>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 6>;
+ status = "disabled";
+ };
+
+ ps21: ps2@01c2a400 {
+ compatible = "allwinner,sun4i-a10-ps2";
+ reg = <0x01c2a400 0x400>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb1_gates 7>;
+ status = "disabled";
};
};
};
* OTHER DEALINGS IN THE SOFTWARE.
*/
- /include/ "skeleton.dtsi"
+ #include "skeleton.dtsi"
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &r_uart;
- };
-
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
dma: dma-controller@01c02000 {
compatible = "allwinner,sun8i-a23-dma";
reg = <0x01c02000 0x1000>;
- interrupts = <0 50 4>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 8>;
reset-names = "ahb";
- interrupts = <0 60 4>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 9>;
reset-names = "ahb";
- interrupts = <0 61 4>;
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
clock-names = "ahb", "mmc";
resets = <&ahb1_rst 10>;
reset-names = "ahb";
- interrupts = <0 62 4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
pio: pinctrl@01c20800 {
compatible = "allwinner,sun8i-a23-pinctrl";
reg = <0x01c20800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 17 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
uart0_pins_a: uart0@0 {
allwinner,pins = "PF2", "PF4";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc0_pins_a: mmc0@0 {
allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
allwinner,function = "mmc0";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
mmc1_pins_a: mmc1@0 {
allwinner,pins = "PG0","PG1","PG2","PG3","PG4","PG5";
allwinner,function = "mmc1";
- allwinner,drive = <2>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c0_pins_a: i2c0@0 {
allwinner,pins = "PH2", "PH3";
allwinner,function = "i2c0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c1_pins_a: i2c1@0 {
allwinner,pins = "PH4", "PH5";
allwinner,function = "i2c1";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
i2c2_pins_a: i2c2@0 {
allwinner,pins = "PE12", "PE13";
allwinner,function = "i2c2";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
timer@01c20c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
wdt0: watchdog@01c20ca0 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x01c20ca0 0x20>;
- interrupts = <0 25 4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
};
uart0: serial@01c28000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 16>;
uart1: serial@01c28400 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 17>;
uart2: serial@01c28800 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 18>;
uart3: serial@01c28c00 {
compatible = "snps,dw-apb-uart";
reg = <0x01c28c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 19>;
uart4: serial@01c29000 {
compatible = "snps,dw-apb-uart";
reg = <0x01c29000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb2_gates 20>;
i2c0: i2c@01c2ac00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2ac00 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 0>;
resets = <&apb2_rst 0>;
status = "disabled";
i2c1: i2c@01c2b000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b000 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 1>;
resets = <&apb2_rst 1>;
status = "disabled";
i2c2: i2c@01c2b400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x01c2b400 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb2_gates 2>;
resets = <&apb2_rst 2>;
status = "disabled";
<0x01c86000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
rtc: rtc@01f00000 {
compatible = "allwinner,sun6i-a31-rtc";
reg = <0x01f00000 0x54>;
- interrupts = <0 40 4>, <0 41 4>;
+ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
};
prcm@01f01400 {
r_uart: serial@01f02800 {
compatible = "snps,dw-apb-uart";
reg = <0x01f02800 0x400>;
- interrupts = <0 38 4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb0_gates 4>;
r_pio: pinctrl@01f02c00 {
compatible = "allwinner,sun8i-a23-r-pinctrl";
reg = <0x01f02c00 0x400>;
- interrupts = <0 45 4>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 0>;
resets = <&apb0_rst 0>;
gpio-controller;
r_uart_pins_a: r_uart@0 {
allwinner,pins = "PL2", "PL3";
allwinner,function = "s_uart";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
};
*/
/dts-v1/;
- /include/ "sun9i-a80.dtsi"
+ #include "sun9i-a80.dtsi"
+ #include "sunxi-common-regulators.dtsi"
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
model = "Merrii A80 Optimus Board";
compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart4;
+ };
+
chosen {
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc {
- pio: pinctrl@06000800 {
- i2c3_pins_a: i2c3@0 {
- /* Enable internal pull-up */
- allwinner,pull = <1>;
- };
-
- led_pins_optimus: led-pins@0 {
- allwinner,pins = "PH0", "PH1";
- allwinner,function = "gpio_out";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
- };
-
- uart4_pins_a: uart4@0 {
- /* Enable internal pull-up */
- allwinner,pull = <1>;
- };
- };
-
- uart0: serial@07000000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
-
- uart4: serial@07001000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
- };
-
- i2c3: i2c@07003400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins_a>;
- status = "okay";
- };
- };
-
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
led2 {
label = "optimus:led2:usr";
- gpios = <&pio 7 1 0>;
+ gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>;
};
/* led3 is on PM15, in R_PIO */
led4 {
label = "optimus:led4:usr";
- gpios = <&pio 7 0 0>;
+ gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>;
};
};
};
+
+ &i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+ };
+
+ &i2c3_pins_a {
+ /* Enable internal pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ &pio {
+ led_pins_optimus: led-pins@0 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_cd_pin_optimus: mmc0_cd_pin@0 {
+ allwinner,pins = "PH18";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+ };
+
+ &mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_optimus>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH8 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ &mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_8bit_pins>;
+ vmmc-supply = <®_vcc3v0>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+ };
+
+ &uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ &uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+ };
+
+ &uart4_pins_a {
+ /* Enable internal pull-up */
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
* OTHER DEALINGS IN THE SOFTWARE.
*/
- /include/ "skeleton64.dtsi"
+ #include "skeleton64.dtsi"
+
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ #include <dt-bindings/pinctrl/sun4i-a10.h>
/ {
interrupt-parent = <&gic>;
- aliases {
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- serial6 = &r_uart;
- };
-
cpus {
#address-cells = <1>;
#size-cells = <0>;
clock-output-names = "cci400";
};
+ mmc0_clk: clk@06000410 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000410 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc0", "mmc0_output",
+ "mmc0_sample";
+ };
+
+ mmc1_clk: clk@06000414 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000414 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc1", "mmc1_output",
+ "mmc1_sample";
+ };
+
+ mmc2_clk: clk@06000418 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x06000418 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc2", "mmc2_output",
+ "mmc2_sample";
+ };
+
+ mmc3_clk: clk@0600041c {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-mmc-clk";
+ reg = <0x0600041c 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "mmc3", "mmc3_output",
+ "mmc3_sample";
+ };
+
ahb0_gates: clk@06000580 {
#clock-cells = <1>;
compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
reg = <0x06000580 0x4>;
clocks = <&ahb0>;
+ clock-indices = <0>, <1>, <3>, <5>, <8>, <12>, <13>,
+ <14>, <15>, <16>, <18>, <20>, <21>,
+ <22>, <23>;
clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
"ahb0_ss", "ahb0_sd", "ahb0_nand1",
"ahb0_nand0", "ahb0_sdram",
compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
reg = <0x06000584 0x4>;
clocks = <&ahb1>;
+ clock-indices = <0>, <1>, <17>, <21>, <22>, <23>, <24>;
clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
"ahb1_gmac", "ahb1_msgbox",
"ahb1_spinlock", "ahb1_hstimer",
compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
reg = <0x06000588 0x4>;
clocks = <&ahb2>;
+ clock-indices = <0>, <1>, <2>, <4>, <5>, <7>, <8>,
+ <11>;
clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
"ahb2_edp", "ahb2_csi", "ahb2_hdmi",
"ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
compatible = "allwinner,sun9i-a80-apb0-gates-clk";
reg = <0x06000590 0x4>;
clocks = <&apb0>;
+ clock-indices = <1>, <5>, <11>, <12>, <13>, <15>,
+ <17>, <18>, <19>;
clock-output-names = "apb0_spdif", "apb0_pio",
"apb0_ac97", "apb0_i2s0", "apb0_i2s1",
"apb0_lradc", "apb0_gpadc", "apb0_twd",
compatible = "allwinner,sun9i-a80-apb1-gates-clk";
reg = <0x06000594 0x4>;
clocks = <&apb1>;
+ clock-indices = <0>, <1>, <2>, <3>, <4>,
+ <16>, <17>, <18>, <19>, <20>, <21>;
clock-output-names = "apb1_i2c0", "apb1_i2c1",
"apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
"apb1_uart0", "apb1_uart1",
*/
ranges = <0 0 0 0x20000000>;
+ mmc0: mmc@01c0f000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c0f000 0x1000>;
+ clocks = <&mmc_config_clk 0>, <&mmc0_clk 0>,
+ <&mmc0_clk 1>, <&mmc0_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 0>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc1: mmc@01c10000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c10000 0x1000>;
+ clocks = <&mmc_config_clk 1>, <&mmc1_clk 0>,
+ <&mmc1_clk 1>, <&mmc1_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 1>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@01c11000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c11000 0x1000>;
+ clocks = <&mmc_config_clk 2>, <&mmc2_clk 0>,
+ <&mmc2_clk 1>, <&mmc2_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 2>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@01c12000 {
+ compatible = "allwinner,sun5i-a13-mmc";
+ reg = <0x01c12000 0x1000>;
+ clocks = <&mmc_config_clk 3>, <&mmc3_clk 0>,
+ <&mmc3_clk 1>, <&mmc3_clk 2>;
+ clock-names = "ahb", "mmc", "output", "sample";
+ resets = <&mmc_config_clk 3>;
+ reset-names = "ahb";
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ mmc_config_clk: clk@01c13000 {
+ compatible = "allwinner,sun9i-a80-mmc-config-clk";
+ reg = <0x01c13000 0x10>;
+ clocks = <&ahb0_gates 8>;
+ clock-names = "ahb";
+ resets = <&ahb0_resets 8>;
+ reset-names = "ahb";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-output-names = "mmc0_config", "mmc1_config",
+ "mmc2_config", "mmc3_config";
+ };
+
gic: interrupt-controller@01c41000 {
compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
reg = <0x01c41000 0x1000>,
<0x01c46000 0x2000>;
interrupt-controller;
#interrupt-cells = <3>;
- interrupts = <1 9 0xf04>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
ahb0_resets: reset@060005a0 {
timer@06000c00 {
compatible = "allwinner,sun4i-a10-timer";
reg = <0x06000c00 0xa0>;
- interrupts = <0 18 4>,
- <0 19 4>,
- <0 20 4>,
- <0 21 4>,
- <0 22 4>,
- <0 23 4>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&osc24M>;
};
pio: pinctrl@06000800 {
compatible = "allwinner,sun9i-a80-pinctrl";
reg = <0x06000800 0x400>;
- interrupts = <0 11 4>,
- <0 15 4>,
- <0 16 4>,
- <0 17 4>,
- <0 120 4>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb0_gates 5>;
gpio-controller;
interrupt-controller;
i2c3_pins_a: i2c3@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "i2c3";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc0_pins: mmc0 {
+ allwinner,pins = "PF0", "PF1" ,"PF2", "PF3",
+ "PF4", "PF5";
+ allwinner,function = "mmc0";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_8bit_pins: mmc2_8bit {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart0_pins_a: uart0@0 {
allwinner,pins = "PH12", "PH13";
allwinner,function = "uart0";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
uart4_pins_a: uart4@0 {
allwinner,pins = "PG12", "PG13", "PG14", "PG15";
allwinner,function = "uart4";
- allwinner,drive = <0>;
- allwinner,pull = <0>;
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
};
uart0: serial@07000000 {
compatible = "snps,dw-apb-uart";
reg = <0x07000000 0x400>;
- interrupts = <0 0 4>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 16>;
uart1: serial@07000400 {
compatible = "snps,dw-apb-uart";
reg = <0x07000400 0x400>;
- interrupts = <0 1 4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 17>;
uart2: serial@07000800 {
compatible = "snps,dw-apb-uart";
reg = <0x07000800 0x400>;
- interrupts = <0 2 4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 18>;
uart3: serial@07000c00 {
compatible = "snps,dw-apb-uart";
reg = <0x07000c00 0x400>;
- interrupts = <0 3 4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 19>;
uart4: serial@07001000 {
compatible = "snps,dw-apb-uart";
reg = <0x07001000 0x400>;
- interrupts = <0 4 4>;
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 20>;
uart5: serial@07001400 {
compatible = "snps,dw-apb-uart";
reg = <0x07001400 0x400>;
- interrupts = <0 5 4>;
+ interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&apb1_gates 21>;
i2c0: i2c@07002800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002800 0x400>;
- interrupts = <0 6 4>;
+ interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 0>;
resets = <&apb1_resets 0>;
status = "disabled";
i2c1: i2c@07002c00 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07002c00 0x400>;
- interrupts = <0 7 4>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 1>;
resets = <&apb1_resets 1>;
status = "disabled";
i2c2: i2c@07003000 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003000 0x400>;
- interrupts = <0 8 4>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 2>;
resets = <&apb1_resets 2>;
status = "disabled";
i2c3: i2c@07003400 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003400 0x400>;
- interrupts = <0 9 4>;
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 3>;
resets = <&apb1_resets 3>;
status = "disabled";
i2c4: i2c@07003800 {
compatible = "allwinner,sun6i-a31-i2c";
reg = <0x07003800 0x400>;
- interrupts = <0 10 4>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&apb1_gates 4>;
resets = <&apb1_resets 4>;
status = "disabled";
r_wdt: watchdog@08001000 {
compatible = "allwinner,sun6i-a31-wdt";
reg = <0x08001000 0x20>;
- interrupts = <0 36 4>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
};
r_uart: serial@08002800 {
compatible = "snps,dw-apb-uart";
reg = <0x08002800 0x400>;
- interrupts = <0 38 4>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
clocks = <&osc24M>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
- cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+ cd-gpios = <&gpio4 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
&fec0 {
phy-mode = "rmii";
+ phy-handle = <ðphy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec0>;
status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
};
&fec1 {
phy-mode = "rmii";
+ phy-handle = <ðphy1>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
status = "okay";
#define SCLK_SDIO0_SAMPLE 119
#define SCLK_SDIO1_SAMPLE 120
#define SCLK_EMMC_SAMPLE 121
+ #define SCLK_USBPHY480M_SRC 122
+ #define SCLK_PVTM_CORE 123
+ #define SCLK_PVTM_GPU 124
+#define SCLK_MAC 151
+#define SCLK_MACREF_OUT 152
+
#define DCLK_VOP0 190
#define DCLK_VOP1 191
#define PCLK_PUBL0 365
#define PCLK_DDRUPCTL1 366
#define PCLK_PUBL1 367
+ #define PCLK_WDT 368
/* hclk gates */
#define HCLK_GPS 448