V4L/DVB (9747): em28xx: Properly handles XCLK and I2C speed
authorMauro Carvalho Chehab <mchehab@redhat.com>
Tue, 25 Nov 2008 10:05:06 +0000 (07:05 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 29 Dec 2008 19:53:41 +0000 (17:53 -0200)
The previous patches removed XCLK and I2C magic. Now, we finally know
what those registers do. Also, only a very few cards need different
setups for those.

Instead of keeping the setups for those values inside the per-device
hack magic switch, move the uncommon values to the board-specific
struct, and have a common setup for all other boards.

So, almost 100 lines of hacking magic were removed.

A co-lateral effect of this patch is that it also fixes a bug at em28xx-core, where xclk
were set, without taking any care about not overriding a previous xclk setup.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/video/em28xx/em28xx-cards.c
drivers/media/video/em28xx/em28xx-core.c
drivers/media/video/em28xx/em28xx.h

index 83f352a41041dc31b33331c2e926aac97032d58e..729c76c59ec50fac882a4727ce13115243a86b17 100644 (file)
@@ -55,6 +55,7 @@ struct em28xx_board em28xx_boards[] = {
        [EM2750_BOARD_UNKNOWN] = {
                .name          = "Unknown EM2750/EM2751 webcam grabber",
                .vchannels     = 1,
+               .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
                .input         = { {
                        .type     = EM28XX_VMUX_COMPOSITE1,
                        .vmux     = 0,
@@ -78,15 +79,15 @@ struct em28xx_board em28xx_boards[] = {
                } },
        },
        [EM2820_BOARD_UNKNOWN] = {
-               .name         = "Unknown EM2750/28xx video grabber",
-               .is_em2800    = 0,
-               .tuner_type   = TUNER_ABSENT,
+               .name          = "Unknown EM2750/28xx video grabber",
+               .tuner_type    = TUNER_ABSENT,
        },
        [EM2750_BOARD_DLCW_130] = {
                /* Beijing Huaqi Information Digital Technology Co., Ltd */
                .name          = "Huaqi DLCW-130",
                .valid         = EM28XX_BOARD_NOT_VALIDATED,
                .vchannels     = 1,
+               .xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
                .input         = { {
                        .type     = EM28XX_VMUX_COMPOSITE1,
                        .vmux     = 0,
@@ -514,6 +515,10 @@ struct em28xx_board em28xx_boards[] = {
                .name         = "Pinnacle PCTV DVB-T",
                .valid        = EM28XX_BOARD_NOT_VALIDATED,
                .tuner_type   = TUNER_ABSENT, /* MT2060 */
+
+               /* djh - I have serious doubts this is right... */
+               .xclk         = EM28XX_XCLK_IR_RC5_MODE |
+                               EM28XX_XCLK_FREQUENCY_10MHZ,
        },
        [EM2870_BOARD_COMPRO_VIDEOMATE] = {
                .name         = "Compro, VideoMate U3",
@@ -547,7 +552,7 @@ struct em28xx_board em28xx_boards[] = {
                .tda9887_conf = TDA9887_PRESENT,
                .tuner_type   = TUNER_XC2028,
                .mts_firmware = 1,
-               .has_dvb        = 1,
+               .has_dvb      = 1,
                .decoder      = EM28XX_TVP5150,
                .input          = { {
                        .type     = EM28XX_VMUX_TELEVISION,
@@ -589,7 +594,6 @@ struct em28xx_board em28xx_boards[] = {
                .vchannels      = 3,
                .tuner_type     = TUNER_XC2028,
                .mts_firmware   = 1,
-               .has_12mhz_i2s  = 1,
                .has_dvb        = 1,
                .ir_codes       = ir_codes_hauppauge_new,
                .decoder        = EM28XX_TVP5150,
@@ -612,7 +616,6 @@ struct em28xx_board em28xx_boards[] = {
                .vchannels      = 3,
                .tuner_type     = TUNER_XC2028,
                .mts_firmware   = 1,
-               .has_12mhz_i2s  = 1,
                .has_dvb        = 1,
                .ir_codes       = ir_codes_pinnacle_pctv_hd,
                .decoder        = EM28XX_TVP5150,
@@ -635,7 +638,6 @@ struct em28xx_board em28xx_boards[] = {
                .vchannels      = 3,
                .tuner_type     = TUNER_XC2028,
                .mts_firmware   = 1,
-               .has_12mhz_i2s  = 1,
                .has_dvb        = 1,
                .ir_codes       = ir_codes_ati_tv_wonder_hd_600,
                .decoder        = EM28XX_TVP5150,
@@ -1091,9 +1093,12 @@ struct em28xx_board em28xx_boards[] = {
                .name         = "Pinnacle PCTV HD Mini",
                .vchannels    = 0,
                .tuner_type   = TUNER_ABSENT,
-               .has_dvb        = 1,
-               .ir_codes       = ir_codes_pinnacle_pctv_hd,
+               .has_dvb      = 1,
+               .ir_codes     = ir_codes_pinnacle_pctv_hd,
                .decoder      = EM28XX_NODECODER,
+               .i2c_speed    = EM28XX_I2C_CLK_WAIT_ENABLE |
+                               EM2874_I2C_SECONDARY_BUS_SELECT |
+                               EM28XX_I2C_FREQ_400_KHZ,
 #ifdef DJH_DEBUG
                .input          = { {
                        .type     = EM28XX_VMUX_TELEVISION,
@@ -1326,7 +1331,8 @@ static void em28xx_set_model(struct em28xx *dev)
        dev->tda9887_conf = em28xx_boards[dev->model].tda9887_conf;
        dev->decoder = em28xx_boards[dev->model].decoder;
        dev->video_inputs = em28xx_boards[dev->model].vchannels;
-       dev->has_12mhz_i2s = em28xx_boards[dev->model].has_12mhz_i2s;
+       dev->xclk = em28xx_boards[dev->model].xclk;
+       dev->i2c_speed = em28xx_boards[dev->model].i2c_speed;
        dev->max_range_640_480 = em28xx_boards[dev->model].max_range_640_480;
        dev->has_dvb = em28xx_boards[dev->model].has_dvb;
        dev->has_snapshot_button = em28xx_boards[dev->model].has_snapshot_button;
@@ -1385,6 +1391,21 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
        em28xx_set_model(dev);
 
+       /* Those are the default values for the majority of boards
+          Use those values if not specified otherwise at boards entry
+        */
+       if (!dev->xclk)
+               dev->xclk = EM28XX_XCLK_IR_RC5_MODE |
+                           EM28XX_XCLK_FREQUENCY_12MHZ;
+
+       if (!dev->i2c_speed)
+               dev->i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE |
+                                EM28XX_I2C_FREQ_100_KHZ;
+
+       em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->xclk & 0x7f);
+       em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->i2c_speed);
+       msleep(50);
+
        /* request some modules */
        switch (dev->model) {
        case EM2880_BOARD_TERRATEC_PRODIGY_XS:
@@ -1396,14 +1417,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
        case EM2882_BOARD_PINNACLE_HYBRID_PRO:
        case EM2883_BOARD_KWORLD_HYBRID_A316:
        case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(50);
-
                /* Sets GPO/GPIO sequences for this device */
                dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
                dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
@@ -1412,16 +1425,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                break;
 
        case EM2882_BOARD_TERRATEC_HYBRID_XS:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(50);
-
-               /* should be added ir_codes here */
-
                /* Sets GPO/GPIO sequences for this device */
                dev->analog_gpio      = hauppauge_wintv_hvr_900_analog;
                dev->digital_gpio     = hauppauge_wintv_hvr_900_digital;
@@ -1436,14 +1439,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
        case EM2880_BOARD_KWORLD_DVB_310U:
        case EM2870_BOARD_KWORLD_350U:
        case EM2881_BOARD_DNT_DA2_HYBRID:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(50);
-
                /* NOTE: EM2881_DNT_DA2_HYBRID spend 140 msleep for digital
                         and analog commands. If this commands doesn't work,
                         add this timer. */
@@ -1457,14 +1452,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
        case EM2880_BOARD_MSI_DIGIVOX_AD:
        case EM2880_BOARD_MSI_DIGIVOX_AD_II:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(50);
-
                /* Sets GPO/GPIO sequences for this device */
                dev->analog_gpio      = em2880_msi_digivox_ad_analog;
                dev->digital_gpio     = em2880_msi_digivox_ad_digital;
@@ -1472,19 +1459,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                dev->tun_digital_gpio = default_callback;
                break;
 
-       case EM2750_BOARD_UNKNOWN:
-       case EM2750_BOARD_DLCW_130:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_FREQUENCY_48MHZ);
-               break;
-
        case EM2861_BOARD_PLEXTOR_PX_TV100U:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
                /* FIXME guess */
                /* Turn on analog audio output */
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
@@ -1492,13 +1467,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 
        case EM2861_BOARD_KWORLD_PVRTV_300U:
        case EM2880_BOARD_KWORLD_DVB_305U:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(10);
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x6d);
                msleep(10);
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0x7d);
@@ -1506,25 +1474,11 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                break;
 
        case EM2870_BOARD_KWORLD_355U:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               msleep(50);
-
                /* Sets GPO/GPIO sequences for this device */
                dev->digital_gpio     = em2870_kworld_355u_digital;
                break;
 
        case EM2870_BOARD_COMPRO_VIDEOMATE:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
                /* TODO: someone can do some cleanup here...
                         not everything's needed */
                em28xx_write_reg(dev, EM2880_R04_GPO, 0x00);
@@ -1542,12 +1496,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                break;
 
        case EM2870_BOARD_TERRATEC_XS_MT2060:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
                /* this device needs some gpio writes to get the DVB-T
                   demod work */
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
@@ -1559,10 +1507,6 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                break;
 
        case EM2870_BOARD_PINNACLE_PCTV_DVB:
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-
                /* this device needs some gpio writes to get the
                   DVB-T demod work */
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
@@ -1571,53 +1515,15 @@ void em28xx_pre_card_setup(struct em28xx *dev)
                mdelay(70);
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfe);
                mdelay(70);
-               /* switch em2880 rc protocol */
-               /* djh - I have serious doubts this is right... */
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_10MHZ);
-               /* should be added ir_codes here */
                break;
 
        case EM2820_BOARD_GADMEI_UTV310:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               /* Turn on analog audio output */
-               em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
-               break;
-
-       case EM2860_BOARD_GADMEI_UTV330:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               /* should be added ir_codes here */
-               break;
-
        case EM2820_BOARD_MSI_VOX_USB_2:
-               em28xx_write_reg(dev, EM28XX_R0F_XCLK,
-                                EM28XX_XCLK_IR_RC5_MODE |
-                                EM28XX_XCLK_FREQUENCY_12MHZ);
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM28XX_I2C_FREQ_100_KHZ);
-               /* enables audio for that device */
+               /* enables audio for that devices */
                em28xx_write_reg(dev, EM28XX_R08_GPIO, 0xfd);
                break;
 
        case EM2874_BOARD_PINNACLE_PCTV_80E:
-               /* Set 400 KHz clock and select secondary i2c bus */
-               em28xx_write_reg(dev, EM28XX_R06_I2C_CLK,
-                                EM28XX_I2C_CLK_WAIT_ENABLE |
-                                EM2874_I2C_SECONDARY_BUS_SELECT |
-                                EM28XX_I2C_FREQ_400_KHZ);
-
                dev->digital_gpio = em2874_pinnacle_80e_digital;
                break;
        }
index 413428aeccd75c7f42a492ce288c653aad7b72d7..53c7252416f01a54c0e450772118784439b2a87b 100644 (file)
@@ -399,7 +399,7 @@ struct em28xx_vol_table outputs[] = {
 int em28xx_audio_analog_set(struct em28xx *dev)
 {
        int ret, i;
-       u8 xclk = 0x07;
+       u8 xclk;
 
        if (!dev->audio_mode.has_audio)
                return 0;
@@ -417,13 +417,11 @@ int em28xx_audio_analog_set(struct em28xx *dev)
                }
        }
 
-       if (dev->has_12mhz_i2s)
-               xclk |= 0x20;
-
+       xclk = dev->xclk & 0x7f;
        if (!dev->mute)
                xclk |= 0x80;
 
-       ret = em28xx_write_reg_bits(dev, EM28XX_R0F_XCLK, xclk, 0xa7);
+       ret = em28xx_write_reg(dev, EM28XX_R0F_XCLK, xclk);
        if (ret < 0)
                return ret;
        msleep(10);
index 4d50d60278c592cdfe321eca564fd45d5699c738..3bf23d3842667245a5996afca491e2fbe4fcb60d 100644 (file)
@@ -338,12 +338,13 @@ struct em28xx_board {
        unsigned int is_em2800:1;
        unsigned int has_msp34xx:1;
        unsigned int mts_firmware:1;
-       unsigned int has_12mhz_i2s:1;
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
        unsigned int has_snapshot_button:1;
        unsigned int valid:1;
 
+       unsigned char xclk, i2c_speed;
+
        enum em28xx_decoder decoder;
 
        struct em28xx_input       input[MAX_EM28XX_INPUT];
@@ -422,12 +423,13 @@ struct em28xx {
        unsigned int stream_on:1;       /* Locks streams */
        unsigned int has_audio_class:1;
        unsigned int has_alsa_audio:1;
-       unsigned int has_12mhz_i2s:1;
        unsigned int max_range_640_480:1;
        unsigned int has_dvb:1;
        unsigned int has_snapshot_button:1;
        unsigned int valid:1;           /* report for validated boards */
 
+       unsigned char xclk, i2c_speed;
+
        struct em28xx_IR *ir;
 
        /* Some older em28xx chips needs a waiting time after writing */