dt-bindings: net: dsa: document additional Microchip KSZ9477 family switches
authorTristram Ha <Tristram.Ha@microchip.com>
Fri, 1 Mar 2019 03:57:22 +0000 (19:57 -0800)
committerDavid S. Miller <davem@davemloft.net>
Sun, 3 Mar 2019 21:48:49 +0000 (13:48 -0800)
Document additional Microchip KSZ9477 family switches.

Show how KSZ8565 switch should be configured as the host port is port 7
instead of port 5.

Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation/devicetree/bindings/net/dsa/ksz.txt

index 8d58c2a7de39c0858901bc9f8fffda56b4a32a1f..e7db7268fd0fd6502d81e2d6014b041895292236 100644 (file)
@@ -7,6 +7,11 @@ Required properties:
   of the following:
   - "microchip,ksz9477"
   - "microchip,ksz9897"
+  - "microchip,ksz9896"
+  - "microchip,ksz9567"
+  - "microchip,ksz8565"
+  - "microchip,ksz9893"
+  - "microchip,ksz9563"
 
 Optional properties:
 
@@ -73,4 +78,42 @@ Ethernet switch connected via SPI to the host, CPU port wired to eth0:
                                };
                        };
                };
+               ksz8565: ksz8565@0 {
+                       compatible = "microchip,ksz8565";
+                       reg = <0>;
+
+                       spi-max-frequency = <44000000>;
+                       spi-cpha;
+                       spi-cpol;
+
+                       ports {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               port@0 {
+                                       reg = <0>;
+                                       label = "lan1";
+                               };
+                               port@1 {
+                                       reg = <1>;
+                                       label = "lan2";
+                               };
+                               port@2 {
+                                       reg = <2>;
+                                       label = "lan3";
+                               };
+                               port@3 {
+                                       reg = <3>;
+                                       label = "lan4";
+                               };
+                               port@6 {
+                                       reg = <6>;
+                                       label = "cpu";
+                                       ethernet = <&eth0>;
+                                       fixed-link {
+                                               speed = <1000>;
+                                               full-duplex;
+                                       };
+                               };
+                       };
+               };
        };