arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the typec connector node for EUD which is attached to
EUD node via port. EUD is also attached to DWC3 node via port.
Also add the role-switch property to dwc3 node.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@quicinc.com>
Link: https://lore.kernel.org/r/b2b6bdf0e7589a7b6a6f9b390b227339636e0da9.1644339918.git.quic_schowdhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 937c2e0e93eb9fff441848f960339c368b1e1de2..96917fe81d43e4049589b7a01bf1fb37bd8bcad5 100644 (file)
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -2583,6 +2583,12 @@
                                phys = <&usb_2_hsphy>;
                                phy-names = "usb2-phy";
                                maximum-speed = "high-speed";
+                               usb-role-switch;
+                               port {
+                                       usb2_role_switch: endpoint {
+                                               remote-endpoint = <&eud_ep>;
+                                       };
+                               };
                        };
                };
 
@@ -2624,6 +2630,36 @@
                        interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
                };
 
+               eud: eud@88e0000 {
+                       compatible = "qcom,sc7280-eud","qcom,eud";
+                       reg = <0 0x88e0000 0 0x2000>,
+                             <0 0x88e2000 0 0x1000>;
+                       interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;
+                       ports {
+                               port@0 {
+                                       eud_ep: endpoint {
+                                               remote-endpoint = <&usb2_role_switch>;
+                                       };
+                               };
+                               port@1 {
+                                       eud_con: endpoint {
+                                               remote-endpoint = <&con_eud>;
+                                       };
+                               };
+                       };
+               };
+
+               eud_typec: connector {
+                       compatible = "usb-c-connector";
+                       ports {
+                               port@0 {
+                                       con_eud: endpoint {
+                                               remote-endpoint = <&eud_con>;
+                                       };
+                               };
+                       };
+               };
+
                nsp_noc: interconnect@a0c0000 {
                        reg = <0 0x0a0c0000 0 0x10000>;
                        compatible = "qcom,sc7280-nsp-noc";