+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Support for OmniVision OV5693 1080p HD camera sensor.
- *
- * Copyright (c) 2013 Intel Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kmod.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/moduleparam.h>
-#include <media/v4l2-device.h>
-#include <linux/io.h>
-#include <linux/acpi.h>
-#include "../../include/linux/atomisp_gmin_platform.h"
-
-#include "ov5693.h"
-#include "ad5823.h"
-
-#define __cci_delay(t) \
- do { \
- if ((t) < 10) { \
- usleep_range((t) * 1000, ((t) + 1) * 1000); \
- } else { \
- msleep((t)); \
- } \
- } while (0)
-
-/* Value 30ms reached through experimentation on byt ecs.
- * The DS specifies a much lower value but when using a smaller value
- * the I2C bus sometimes locks up permanently when starting the camera.
- * This issue could not be reproduced on cht, so we can reduce the
- * delay value to a lower value when insmod.
- */
-static uint up_delay = 30;
-module_param(up_delay, uint, 0644);
-MODULE_PARM_DESC(up_delay,
- "Delay prior to the first CCI transaction for ov5693");
-
-static int vcm_ad_i2c_wr8(struct i2c_client *client, u8 reg, u8 val)
-{
- int err;
- struct i2c_msg msg;
- u8 buf[2];
-
- buf[0] = reg;
- buf[1] = val;
-
- msg.addr = VCM_ADDR;
- msg.flags = 0;
- msg.len = 2;
- msg.buf = &buf[0];
-
- err = i2c_transfer(client->adapter, &msg, 1);
- if (err != 1) {
- dev_err(&client->dev, "%s: vcm i2c fail, err code = %d\n",
- __func__, err);
- return -EIO;
- }
- return 0;
-}
-
-static int ad5823_i2c_write(struct i2c_client *client, u8 reg, u8 val)
-{
- struct i2c_msg msg;
- u8 buf[2];
-
- buf[0] = reg;
- buf[1] = val;
- msg.addr = AD5823_VCM_ADDR;
- msg.flags = 0;
- msg.len = 0x02;
- msg.buf = &buf[0];
-
- if (i2c_transfer(client->adapter, &msg, 1) != 1)
- return -EIO;
- return 0;
-}
-
-static int ad5823_i2c_read(struct i2c_client *client, u8 reg, u8 *val)
-{
- struct i2c_msg msg[2];
- u8 buf[2];
-
- buf[0] = reg;
- buf[1] = 0;
-
- msg[0].addr = AD5823_VCM_ADDR;
- msg[0].flags = 0;
- msg[0].len = 0x01;
- msg[0].buf = &buf[0];
-
- msg[1].addr = 0x0c;
- msg[1].flags = I2C_M_RD;
- msg[1].len = 0x01;
- msg[1].buf = &buf[1];
- *val = 0;
- if (i2c_transfer(client->adapter, msg, 2) != 2)
- return -EIO;
- *val = buf[1];
- return 0;
-}
-
-static const u32 ov5693_embedded_effective_size = 28;
-
-/* i2c read/write stuff */
-static int ov5693_read_reg(struct i2c_client *client,
- u16 data_length, u16 reg, u16 *val)
-{
- int err;
- struct i2c_msg msg[2];
- unsigned char data[6];
-
- if (!client->adapter) {
- dev_err(&client->dev, "%s error, no client->adapter\n",
- __func__);
- return -ENODEV;
- }
-
- if (data_length != OV5693_8BIT && data_length != OV5693_16BIT
- && data_length != OV5693_32BIT) {
- dev_err(&client->dev, "%s error, invalid data length\n",
- __func__);
- return -EINVAL;
- }
-
- memset(msg, 0, sizeof(msg));
-
- msg[0].addr = client->addr;
- msg[0].flags = 0;
- msg[0].len = I2C_MSG_LENGTH;
- msg[0].buf = data;
-
- /* high byte goes out first */
- data[0] = (u8)(reg >> 8);
- data[1] = (u8)(reg & 0xff);
-
- msg[1].addr = client->addr;
- msg[1].len = data_length;
- msg[1].flags = I2C_M_RD;
- msg[1].buf = data;
-
- err = i2c_transfer(client->adapter, msg, 2);
- if (err != 2) {
- if (err >= 0)
- err = -EIO;
- dev_err(&client->dev,
- "read from offset 0x%x error %d", reg, err);
- return err;
- }
-
- *val = 0;
- /* high byte comes first */
- if (data_length == OV5693_8BIT)
- *val = (u8)data[0];
- else if (data_length == OV5693_16BIT)
- *val = be16_to_cpu(*(__be16 *)&data[0]);
- else
- *val = be32_to_cpu(*(__be32 *)&data[0]);
-
- return 0;
-}
-
-static int ov5693_i2c_write(struct i2c_client *client, u16 len, u8 *data)
-{
- struct i2c_msg msg;
- const int num_msg = 1;
- int ret;
-
- msg.addr = client->addr;
- msg.flags = 0;
- msg.len = len;
- msg.buf = data;
- ret = i2c_transfer(client->adapter, &msg, 1);
-
- return ret == num_msg ? 0 : -EIO;
-}
-
-static int vcm_dw_i2c_write(struct i2c_client *client, u16 data)
-{
- struct i2c_msg msg;
- const int num_msg = 1;
- int ret;
- __be16 val;
-
- val = cpu_to_be16(data);
- msg.addr = VCM_ADDR;
- msg.flags = 0;
- msg.len = OV5693_16BIT;
- msg.buf = (void *)&val;
-
- ret = i2c_transfer(client->adapter, &msg, 1);
-
- return ret == num_msg ? 0 : -EIO;
-}
-
-/*
- * Theory: per datasheet, the two VCMs both allow for a 2-byte read.
- * The DW9714 doesn't actually specify what this does (it has a
- * two-byte write-only protocol, but specifies the read sequence as
- * legal), but it returns the same data (zeroes) always, after an
- * undocumented initial NAK. The AD5823 has a one-byte address
- * register to which all writes go, and subsequent reads will cycle
- * through the 8 bytes of registers. Notably, the default values (the
- * device is always power-cycled affirmatively, so we can rely on
- * these) in AD5823 are not pairwise repetitions of the same 16 bit
- * word. So all we have to do is sequentially read two bytes at a
- * time and see if we detect a difference in any of the first four
- * pairs.
- */
-static int vcm_detect(struct i2c_client *client)
-{
- int i, ret;
- struct i2c_msg msg;
- u16 data0 = 0, data;
-
- for (i = 0; i < 4; i++) {
- msg.addr = VCM_ADDR;
- msg.flags = I2C_M_RD;
- msg.len = sizeof(data);
- msg.buf = (u8 *)&data;
- ret = i2c_transfer(client->adapter, &msg, 1);
-
- /*
- * DW9714 always fails the first read and returns
- * zeroes for subsequent ones
- */
- if (i == 0 && ret == -EREMOTEIO) {
- data0 = 0;
- continue;
- }
-
- if (i == 0)
- data0 = data;
-
- if (data != data0)
- return VCM_AD5823;
- }
- return ret == 1 ? VCM_DW9714 : ret;
-}
-
-static int ov5693_write_reg(struct i2c_client *client, u16 data_length,
- u16 reg, u16 val)
-{
- int ret;
- unsigned char data[4] = {0};
- __be16 *wreg = (void *)data;
- const u16 len = data_length + sizeof(u16); /* 16-bit address + data */
-
- if (data_length != OV5693_8BIT && data_length != OV5693_16BIT) {
- dev_err(&client->dev,
- "%s error, invalid data_length\n", __func__);
- return -EINVAL;
- }
-
- /* high byte goes out first */
- *wreg = cpu_to_be16(reg);
-
- if (data_length == OV5693_8BIT) {
- data[2] = (u8)(val);
- } else {
- /* OV5693_16BIT */
- __be16 *wdata = (void *)&data[2];
-
- *wdata = cpu_to_be16(val);
- }
-
- ret = ov5693_i2c_write(client, len, data);
- if (ret)
- dev_err(&client->dev,
- "write error: wrote 0x%x to offset 0x%x error %d",
- val, reg, ret);
-
- return ret;
-}
-
-/*
- * ov5693_write_reg_array - Initializes a list of OV5693 registers
- * @client: i2c driver client structure
- * @reglist: list of registers to be written
- *
- * This function initializes a list of registers. When consecutive addresses
- * are found in a row on the list, this function creates a buffer and sends
- * consecutive data in a single i2c_transfer().
- *
- * __ov5693_flush_reg_array, __ov5693_buf_reg_array() and
- * __ov5693_write_reg_is_consecutive() are internal functions to
- * ov5693_write_reg_array_fast() and should be not used anywhere else.
- *
- */
-
-static int __ov5693_flush_reg_array(struct i2c_client *client,
- struct ov5693_write_ctrl *ctrl)
-{
- u16 size;
- __be16 *reg = (void *)&ctrl->buffer.addr;
-
- if (ctrl->index == 0)
- return 0;
-
- size = sizeof(u16) + ctrl->index; /* 16-bit address + data */
-
- *reg = cpu_to_be16(ctrl->buffer.addr);
- ctrl->index = 0;
-
- return ov5693_i2c_write(client, size, (u8 *)reg);
-}
-
-static int __ov5693_buf_reg_array(struct i2c_client *client,
- struct ov5693_write_ctrl *ctrl,
- const struct ov5693_reg *next)
-{
- int size;
- __be16 *data16;
-
- switch (next->type) {
- case OV5693_8BIT:
- size = 1;
- ctrl->buffer.data[ctrl->index] = (u8)next->val;
- break;
- case OV5693_16BIT:
- size = 2;
-
- data16 = (void *)&ctrl->buffer.data[ctrl->index];
- *data16 = cpu_to_be16((u16)next->val);
- break;
- default:
- return -EINVAL;
- }
-
- /* When first item is added, we need to store its starting address */
- if (ctrl->index == 0)
- ctrl->buffer.addr = next->reg;
-
- ctrl->index += size;
-
- /*
- * Buffer cannot guarantee free space for u32? Better flush it to avoid
- * possible lack of memory for next item.
- */
- if (ctrl->index + sizeof(u16) >= OV5693_MAX_WRITE_BUF_SIZE)
- return __ov5693_flush_reg_array(client, ctrl);
-
- return 0;
-}
-
-static int __ov5693_write_reg_is_consecutive(struct i2c_client *client,
- struct ov5693_write_ctrl *ctrl,
- const struct ov5693_reg *next)
-{
- if (ctrl->index == 0)
- return 1;
-
- return ctrl->buffer.addr + ctrl->index == next->reg;
-}
-
-static int ov5693_write_reg_array(struct i2c_client *client,
- const struct ov5693_reg *reglist)
-{
- const struct ov5693_reg *next = reglist;
- struct ov5693_write_ctrl ctrl;
- int err;
-
- ctrl.index = 0;
- for (; next->type != OV5693_TOK_TERM; next++) {
- switch (next->type & OV5693_TOK_MASK) {
- case OV5693_TOK_DELAY:
- err = __ov5693_flush_reg_array(client, &ctrl);
- if (err)
- return err;
- msleep(next->val);
- break;
- default:
- /*
- * If next address is not consecutive, data needs to be
- * flushed before proceed.
- */
- if (!__ov5693_write_reg_is_consecutive(client, &ctrl,
- next)) {
- err = __ov5693_flush_reg_array(client, &ctrl);
- if (err)
- return err;
- }
- err = __ov5693_buf_reg_array(client, &ctrl, next);
- if (err) {
- dev_err(&client->dev,
- "%s: write error, aborted\n",
- __func__);
- return err;
- }
- break;
- }
- }
-
- return __ov5693_flush_reg_array(client, &ctrl);
-}
-
-static long __ov5693_set_exposure(struct v4l2_subdev *sd, int coarse_itg,
- int gain, int digitgain)
-
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- u16 vts, hts;
- int ret, exp_val;
-
- hts = ov5693_res[dev->fmt_idx].pixels_per_line;
- vts = ov5693_res[dev->fmt_idx].lines_per_frame;
- /*
- * If coarse_itg is larger than 1<<15, can not write to reg directly.
- * The way is to write coarse_itg/2 to the reg, meanwhile write 2*hts
- * to the reg.
- */
- if (coarse_itg > (1 << 15)) {
- hts = hts * 2;
- coarse_itg = (int)coarse_itg / 2;
- }
- /* group hold */
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_GROUP_ACCESS, 0x00);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_GROUP_ACCESS);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_TIMING_HTS_H, (hts >> 8) & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_TIMING_HTS_H);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_TIMING_HTS_L, hts & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_TIMING_HTS_L);
- return ret;
- }
- /* Increase the VTS to match exposure + MARGIN */
- if (coarse_itg > vts - OV5693_INTEGRATION_TIME_MARGIN)
- vts = (u16)coarse_itg + OV5693_INTEGRATION_TIME_MARGIN;
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_TIMING_VTS_H, (vts >> 8) & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_TIMING_VTS_H);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_TIMING_VTS_L, vts & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_TIMING_VTS_L);
- return ret;
- }
-
- /* set exposure */
-
- /* Lower four bit should be 0*/
- exp_val = coarse_itg << 4;
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_L, exp_val & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_EXPOSURE_L);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_M, (exp_val >> 8) & 0xFF);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_EXPOSURE_M);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_H, (exp_val >> 16) & 0x0F);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_EXPOSURE_H);
- return ret;
- }
-
- /* Analog gain */
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_AGC_L, gain & 0xff);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_AGC_L);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_AGC_H, (gain >> 8) & 0xff);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_AGC_H);
- return ret;
- }
-
- /* Digital gain */
- if (digitgain) {
- ret = ov5693_write_reg(client, OV5693_16BIT,
- OV5693_MWB_RED_GAIN_H, digitgain);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_MWB_RED_GAIN_H);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_16BIT,
- OV5693_MWB_GREEN_GAIN_H, digitgain);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_MWB_RED_GAIN_H);
- return ret;
- }
-
- ret = ov5693_write_reg(client, OV5693_16BIT,
- OV5693_MWB_BLUE_GAIN_H, digitgain);
- if (ret) {
- dev_err(&client->dev, "%s: write %x error, aborted\n",
- __func__, OV5693_MWB_RED_GAIN_H);
- return ret;
- }
- }
-
- /* End group */
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_GROUP_ACCESS, 0x10);
- if (ret)
- return ret;
-
- /* Delay launch group */
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_GROUP_ACCESS, 0xa0);
- if (ret)
- return ret;
- return ret;
-}
-
-static int ov5693_set_exposure(struct v4l2_subdev *sd, int exposure,
- int gain, int digitgain)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- int ret;
-
- mutex_lock(&dev->input_lock);
- ret = __ov5693_set_exposure(sd, exposure, gain, digitgain);
- mutex_unlock(&dev->input_lock);
-
- return ret;
-}
-
-static long ov5693_s_exposure(struct v4l2_subdev *sd,
- struct atomisp_exposure *exposure)
-{
- u16 coarse_itg = exposure->integration_time[0];
- u16 analog_gain = exposure->gain[0];
- u16 digital_gain = exposure->gain[1];
-
- /* we should not accept the invalid value below */
- if (analog_gain == 0) {
- struct i2c_client *client = v4l2_get_subdevdata(sd);
-
- v4l2_err(client, "%s: invalid value\n", __func__);
- return -EINVAL;
- }
- return ov5693_set_exposure(sd, coarse_itg, analog_gain, digital_gain);
-}
-
-static int ov5693_read_otp_reg_array(struct i2c_client *client, u16 size,
- u16 addr, u8 *buf)
-{
- u16 index;
- int ret;
- u16 *pVal = NULL;
-
- for (index = 0; index <= size; index++) {
- pVal = (u16 *)(buf + index);
- ret =
- ov5693_read_reg(client, OV5693_8BIT, addr + index,
- pVal);
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static int __ov5693_otp_read(struct v4l2_subdev *sd, u8 *buf)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- int ret;
- int i;
- u8 *b = buf;
-
- dev->otp_size = 0;
- for (i = 1; i < OV5693_OTP_BANK_MAX; i++) {
- /*set bank NO and OTP read mode. */
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_OTP_BANK_REG,
- (i | 0xc0)); //[7:6] 2'b11 [5:0] bank no
- if (ret) {
- dev_err(&client->dev, "failed to prepare OTP page\n");
- return ret;
- }
- //pr_debug("write 0x%x->0x%x\n",OV5693_OTP_BANK_REG,(i|0xc0));
-
- /*enable read */
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_OTP_READ_REG,
- OV5693_OTP_MODE_READ); // enable :1
- if (ret) {
- dev_err(&client->dev,
- "failed to set OTP reading mode page");
- return ret;
- }
- //pr_debug("write 0x%x->0x%x\n",OV5693_OTP_READ_REG,OV5693_OTP_MODE_READ);
-
- /* Reading the OTP data array */
- ret = ov5693_read_otp_reg_array(client, OV5693_OTP_BANK_SIZE,
- OV5693_OTP_START_ADDR,
- b);
- if (ret) {
- dev_err(&client->dev, "failed to read OTP data\n");
- return ret;
- }
-
- //pr_debug("BANK[%2d] %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x %02x\n", i, *b, *(b+1), *(b+2), *(b+3), *(b+4), *(b+5), *(b+6), *(b+7), *(b+8), *(b+9), *(b+10), *(b+11), *(b+12), *(b+13), *(b+14), *(b+15));
-
- //Intel OTP map, try to read 320byts first.
- if (i == 21) {
- if ((*b) == 0) {
- dev->otp_size = 320;
- break;
- } else {
- b = buf;
- continue;
- }
- } else if (i ==
- 24) { //if the first 320bytes data doesn't not exist, try to read the next 32bytes data.
- if ((*b) == 0) {
- dev->otp_size = 32;
- break;
- } else {
- b = buf;
- continue;
- }
- } else if (i ==
- 27) { //if the prvious 32bytes data doesn't exist, try to read the next 32bytes data again.
- if ((*b) == 0) {
- dev->otp_size = 32;
- break;
- } else {
- dev->otp_size = 0; // no OTP data.
- break;
- }
- }
-
- b = b + OV5693_OTP_BANK_SIZE;
- }
- return 0;
-}
-
-/*
- * Read otp data and store it into a kmalloced buffer.
- * The caller must kfree the buffer when no more needed.
- * @size: set to the size of the returned otp data.
- */
-static void *ov5693_otp_read(struct v4l2_subdev *sd)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u8 *buf;
- int ret;
-
- buf = devm_kzalloc(&client->dev, (OV5693_OTP_DATA_SIZE + 16), GFP_KERNEL);
- if (!buf)
- return ERR_PTR(-ENOMEM);
-
- //otp valid after mipi on and sw stream on
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_FRAME_OFF_NUM, 0x00);
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_SW_STREAM, OV5693_START_STREAMING);
-
- ret = __ov5693_otp_read(sd, buf);
-
- //mipi off and sw stream off after otp read
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_FRAME_OFF_NUM, 0x0f);
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_SW_STREAM, OV5693_STOP_STREAMING);
-
- /* Driver has failed to find valid data */
- if (ret) {
- dev_err(&client->dev, "sensor found no valid OTP data\n");
- return ERR_PTR(ret);
- }
-
- return buf;
-}
-
-static long ov5693_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg)
-{
- switch (cmd) {
- case ATOMISP_IOC_S_EXPOSURE:
- return ov5693_s_exposure(sd, arg);
- default:
- return -EINVAL;
- }
- return 0;
-}
-
-/*
- * This returns the exposure time being used. This should only be used
- * for filling in EXIF data, not for actual image processing.
- */
-static int ov5693_q_exposure(struct v4l2_subdev *sd, s32 *value)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- u16 reg_v, reg_v2;
- int ret;
-
- /* get exposure */
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_L,
- ®_v);
- if (ret)
- goto err;
-
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_M,
- ®_v2);
- if (ret)
- goto err;
-
- reg_v += reg_v2 << 8;
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_EXPOSURE_H,
- ®_v2);
- if (ret)
- goto err;
-
- *value = reg_v + (((u32)reg_v2 << 16));
-err:
- return ret;
-}
-
-static int ad5823_t_focus_vcm(struct v4l2_subdev *sd, u16 val)
-{
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
- u8 vcm_code;
-
- ret = ad5823_i2c_read(client, AD5823_REG_VCM_CODE_MSB, &vcm_code);
- if (ret)
- return ret;
-
- /* set reg VCM_CODE_MSB Bit[1:0] */
- vcm_code = (vcm_code & VCM_CODE_MSB_MASK) |
- ((val >> 8) & ~VCM_CODE_MSB_MASK);
- ret = ad5823_i2c_write(client, AD5823_REG_VCM_CODE_MSB, vcm_code);
- if (ret)
- return ret;
-
- /* set reg VCM_CODE_LSB Bit[7:0] */
- ret = ad5823_i2c_write(client, AD5823_REG_VCM_CODE_LSB, (val & 0xff));
- if (ret)
- return ret;
-
- /* set required vcm move time */
- vcm_code = AD5823_RESONANCE_PERIOD / AD5823_RESONANCE_COEF
- - AD5823_HIGH_FREQ_RANGE;
- ret = ad5823_i2c_write(client, AD5823_REG_VCM_MOVE_TIME, vcm_code);
-
- return ret;
-}
-
-static int ad5823_t_focus_abs(struct v4l2_subdev *sd, s32 value)
-{
- value = min(value, AD5823_MAX_FOCUS_POS);
- return ad5823_t_focus_vcm(sd, value);
-}
-
-static int ov5693_t_focus_abs(struct v4l2_subdev *sd, s32 value)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- dev_dbg(&client->dev, "%s: FOCUS_POS: 0x%x\n", __func__, value);
- value = clamp(value, 0, OV5693_VCM_MAX_FOCUS_POS);
- if (dev->vcm == VCM_DW9714) {
- if (dev->vcm_update) {
- ret = vcm_dw_i2c_write(client, VCM_PROTECTION_OFF);
- if (ret)
- return ret;
- ret = vcm_dw_i2c_write(client, DIRECT_VCM);
- if (ret)
- return ret;
- ret = vcm_dw_i2c_write(client, VCM_PROTECTION_ON);
- if (ret)
- return ret;
- dev->vcm_update = false;
- }
- ret = vcm_dw_i2c_write(client,
- vcm_val(value, VCM_DEFAULT_S));
- } else if (dev->vcm == VCM_AD5823) {
- ad5823_t_focus_abs(sd, value);
- }
- if (ret == 0) {
- dev->number_of_steps = value - dev->focus;
- dev->focus = value;
- dev->timestamp_t_focus_abs = ktime_get();
- } else
- dev_err(&client->dev,
- "%s: i2c failed. ret %d\n", __func__, ret);
-
- return ret;
-}
-
-static int ov5693_t_focus_rel(struct v4l2_subdev *sd, s32 value)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- return ov5693_t_focus_abs(sd, dev->focus + value);
-}
-
-#define DELAY_PER_STEP_NS 1000000
-#define DELAY_MAX_PER_STEP_NS (1000000 * 1023)
-static int ov5693_q_focus_status(struct v4l2_subdev *sd, s32 *value)
-{
- u32 status = 0;
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- ktime_t temptime;
- ktime_t timedelay = ns_to_ktime(min_t(u32,
- abs(dev->number_of_steps) * DELAY_PER_STEP_NS,
- DELAY_MAX_PER_STEP_NS));
-
- temptime = ktime_sub(ktime_get(), (dev->timestamp_t_focus_abs));
- if (ktime_compare(temptime, timedelay) <= 0) {
- status |= ATOMISP_FOCUS_STATUS_MOVING;
- status |= ATOMISP_FOCUS_HP_IN_PROGRESS;
- } else {
- status |= ATOMISP_FOCUS_STATUS_ACCEPTS_NEW_MOVE;
- status |= ATOMISP_FOCUS_HP_COMPLETE;
- }
-
- *value = status;
-
- return 0;
-}
-
-static int ov5693_q_focus_abs(struct v4l2_subdev *sd, s32 *value)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- s32 val;
-
- ov5693_q_focus_status(sd, &val);
-
- if (val & ATOMISP_FOCUS_STATUS_MOVING)
- *value = dev->focus - dev->number_of_steps;
- else
- *value = dev->focus;
-
- return 0;
-}
-
-static int ov5693_t_vcm_slew(struct v4l2_subdev *sd, s32 value)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- dev->number_of_steps = value;
- dev->vcm_update = true;
- return 0;
-}
-
-static int ov5693_t_vcm_timing(struct v4l2_subdev *sd, s32 value)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- dev->number_of_steps = value;
- dev->vcm_update = true;
- return 0;
-}
-
-static int ov5693_s_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct ov5693_device *dev =
- container_of(ctrl->handler, struct ov5693_device, ctrl_handler);
- struct i2c_client *client = v4l2_get_subdevdata(&dev->sd);
- int ret = 0;
-
- switch (ctrl->id) {
- case V4L2_CID_FOCUS_ABSOLUTE:
- dev_dbg(&client->dev, "%s: CID_FOCUS_ABSOLUTE:%d.\n",
- __func__, ctrl->val);
- ret = ov5693_t_focus_abs(&dev->sd, ctrl->val);
- break;
- case V4L2_CID_FOCUS_RELATIVE:
- dev_dbg(&client->dev, "%s: CID_FOCUS_RELATIVE:%d.\n",
- __func__, ctrl->val);
- ret = ov5693_t_focus_rel(&dev->sd, ctrl->val);
- break;
- case V4L2_CID_VCM_SLEW:
- ret = ov5693_t_vcm_slew(&dev->sd, ctrl->val);
- break;
- case V4L2_CID_VCM_TIMING:
- ret = ov5693_t_vcm_timing(&dev->sd, ctrl->val);
- break;
- default:
- ret = -EINVAL;
- }
- return ret;
-}
-
-static int ov5693_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
-{
- struct ov5693_device *dev =
- container_of(ctrl->handler, struct ov5693_device, ctrl_handler);
- int ret = 0;
-
- switch (ctrl->id) {
- case V4L2_CID_EXPOSURE_ABSOLUTE:
- ret = ov5693_q_exposure(&dev->sd, &ctrl->val);
- break;
- case V4L2_CID_FOCUS_ABSOLUTE:
- ret = ov5693_q_focus_abs(&dev->sd, &ctrl->val);
- break;
- case V4L2_CID_FOCUS_STATUS:
- ret = ov5693_q_focus_status(&dev->sd, &ctrl->val);
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static const struct v4l2_ctrl_ops ctrl_ops = {
- .s_ctrl = ov5693_s_ctrl,
- .g_volatile_ctrl = ov5693_g_volatile_ctrl
-};
-
-static const struct v4l2_ctrl_config ov5693_controls[] = {
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_EXPOSURE_ABSOLUTE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "exposure",
- .min = 0x0,
- .max = 0xffff,
- .step = 0x01,
- .def = 0x00,
- .flags = 0,
- },
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_FOCUS_ABSOLUTE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "focus move absolute",
- .min = 0,
- .max = OV5693_VCM_MAX_FOCUS_POS,
- .step = 1,
- .def = 0,
- .flags = 0,
- },
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_FOCUS_RELATIVE,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "focus move relative",
- .min = OV5693_VCM_MAX_FOCUS_NEG,
- .max = OV5693_VCM_MAX_FOCUS_POS,
- .step = 1,
- .def = 0,
- .flags = 0,
- },
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_FOCUS_STATUS,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "focus status",
- .min = 0,
- .max = 100, /* allow enum to grow in the future */
- .step = 1,
- .def = 0,
- .flags = 0,
- },
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_VCM_SLEW,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "vcm slew",
- .min = 0,
- .max = OV5693_VCM_SLEW_STEP_MAX,
- .step = 1,
- .def = 0,
- .flags = 0,
- },
- {
- .ops = &ctrl_ops,
- .id = V4L2_CID_VCM_TIMING,
- .type = V4L2_CTRL_TYPE_INTEGER,
- .name = "vcm step time",
- .min = 0,
- .max = OV5693_VCM_SLEW_TIME_MAX,
- .step = 1,
- .def = 0,
- .flags = 0,
- },
-};
-
-static int ov5693_init(struct v4l2_subdev *sd)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- pr_info("%s\n", __func__);
- mutex_lock(&dev->input_lock);
- dev->vcm_update = false;
-
- if (dev->vcm == VCM_AD5823) {
- ret = vcm_ad_i2c_wr8(client, 0x01, 0x01); /* vcm init test */
- if (ret)
- dev_err(&client->dev,
- "vcm reset failed\n");
- /*change the mode*/
- ret = ad5823_i2c_write(client, AD5823_REG_VCM_CODE_MSB,
- AD5823_RING_CTRL_ENABLE);
- if (ret)
- dev_err(&client->dev,
- "vcm enable ringing failed\n");
- ret = ad5823_i2c_write(client, AD5823_REG_MODE,
- AD5823_ARC_RES1);
- if (ret)
- dev_err(&client->dev,
- "vcm change mode failed\n");
- }
-
- /*change initial focus value for ad5823*/
- if (dev->vcm == VCM_AD5823) {
- dev->focus = AD5823_INIT_FOCUS_POS;
- ov5693_t_focus_abs(sd, AD5823_INIT_FOCUS_POS);
- } else {
- dev->focus = 0;
- ov5693_t_focus_abs(sd, 0);
- }
-
- mutex_unlock(&dev->input_lock);
-
- return 0;
-}
-
-static int power_ctrl(struct v4l2_subdev *sd, bool flag)
-{
- int ret;
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- if (!dev || !dev->platform_data)
- return -ENODEV;
-
- /*
- * This driver assumes "internal DVDD, PWDNB tied to DOVDD".
- * In this set up only gpio0 (XSHUTDN) should be available
- * but in some products (for example ECS) gpio1 (PWDNB) is
- * also available. If gpio1 is available we emulate it being
- * tied to DOVDD here.
- */
- if (flag) {
- ret = dev->platform_data->v2p8_ctrl(sd, 1);
- dev->platform_data->gpio1_ctrl(sd, 1);
- if (ret == 0) {
- ret = dev->platform_data->v1p8_ctrl(sd, 1);
- if (ret) {
- dev->platform_data->gpio1_ctrl(sd, 0);
- ret = dev->platform_data->v2p8_ctrl(sd, 0);
- }
- }
- } else {
- dev->platform_data->gpio1_ctrl(sd, 0);
- ret = dev->platform_data->v1p8_ctrl(sd, 0);
- ret |= dev->platform_data->v2p8_ctrl(sd, 0);
- }
-
- return ret;
-}
-
-static int gpio_ctrl(struct v4l2_subdev *sd, bool flag)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- if (!dev || !dev->platform_data)
- return -ENODEV;
-
- return dev->platform_data->gpio0_ctrl(sd, flag);
-}
-
-static int __power_up(struct v4l2_subdev *sd)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- if (!dev->platform_data) {
- dev_err(&client->dev,
- "no camera_sensor_platform_data");
- return -ENODEV;
- }
-
- /* power control */
- ret = power_ctrl(sd, 1);
- if (ret)
- goto fail_power;
-
- /* according to DS, at least 5ms is needed between DOVDD and PWDN */
- /* add this delay time to 10~11ms*/
- usleep_range(10000, 11000);
-
- /* gpio ctrl */
- ret = gpio_ctrl(sd, 1);
- if (ret) {
- ret = gpio_ctrl(sd, 1);
- if (ret)
- goto fail_power;
- }
-
- /* flis clock control */
- ret = dev->platform_data->flisclk_ctrl(sd, 1);
- if (ret)
- goto fail_clk;
-
- __cci_delay(up_delay);
-
- return 0;
-
-fail_clk:
- gpio_ctrl(sd, 0);
-fail_power:
- power_ctrl(sd, 0);
- dev_err(&client->dev, "sensor power-up failed\n");
-
- return ret;
-}
-
-static int power_down(struct v4l2_subdev *sd)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- dev->focus = OV5693_INVALID_CONFIG;
- if (!dev->platform_data) {
- dev_err(&client->dev,
- "no camera_sensor_platform_data");
- return -ENODEV;
- }
-
- ret = dev->platform_data->flisclk_ctrl(sd, 0);
- if (ret)
- dev_err(&client->dev, "flisclk failed\n");
-
- /* gpio ctrl */
- ret = gpio_ctrl(sd, 0);
- if (ret) {
- ret = gpio_ctrl(sd, 0);
- if (ret)
- dev_err(&client->dev, "gpio failed 2\n");
- }
-
- /* power control */
- ret = power_ctrl(sd, 0);
- if (ret)
- dev_err(&client->dev, "vprog failed.\n");
-
- return ret;
-}
-
-static int power_up(struct v4l2_subdev *sd)
-{
- static const int retry_count = 4;
- int i, ret;
-
- for (i = 0; i < retry_count; i++) {
- ret = __power_up(sd);
- if (!ret)
- return 0;
-
- power_down(sd);
- }
- return ret;
-}
-
-static int ov5693_s_power(struct v4l2_subdev *sd, int on)
-{
- int ret;
-
- pr_info("%s: on %d\n", __func__, on);
- if (on == 0)
- return power_down(sd);
- else {
- ret = power_up(sd);
- if (!ret) {
- ret = ov5693_init(sd);
- /* restore settings */
- ov5693_res = ov5693_res_preview;
- N_RES = N_RES_PREVIEW;
- }
- }
- return ret;
-}
-
-/*
- * distance - calculate the distance
- * @res: resolution
- * @w: width
- * @h: height
- *
- * Get the gap between res_w/res_h and w/h.
- * distance = (res_w/res_h - w/h) / (w/h) * 8192
- * res->width/height smaller than w/h wouldn't be considered.
- * The gap of ratio larger than 1/8 wouldn't be considered.
- * Returns the value of gap or -1 if fail.
- */
-#define LARGEST_ALLOWED_RATIO_MISMATCH 1024
-static int distance(struct ov5693_resolution *res, u32 w, u32 h)
-{
- int ratio;
- int distance;
-
- if (w == 0 || h == 0 ||
- res->width < w || res->height < h)
- return -1;
-
- ratio = res->width << 13;
- ratio /= w;
- ratio *= h;
- ratio /= res->height;
-
- distance = abs(ratio - 8192);
-
- if (distance > LARGEST_ALLOWED_RATIO_MISMATCH)
- return -1;
-
- return distance;
-}
-
-/* Return the nearest higher resolution index
- * Firstly try to find the approximate aspect ratio resolution
- * If we find multiple same AR resolutions, choose the
- * minimal size.
- */
-static int nearest_resolution_index(int w, int h)
-{
- int i;
- int idx = -1;
- int dist;
- int min_dist = INT_MAX;
- int min_res_w = INT_MAX;
- struct ov5693_resolution *tmp_res = NULL;
-
- for (i = 0; i < N_RES; i++) {
- tmp_res = &ov5693_res[i];
- dist = distance(tmp_res, w, h);
- if (dist == -1)
- continue;
- if (dist < min_dist) {
- min_dist = dist;
- idx = i;
- min_res_w = ov5693_res[i].width;
- continue;
- }
- if (dist == min_dist && ov5693_res[i].width < min_res_w)
- idx = i;
- }
-
- return idx;
-}
-
-static int get_resolution_index(int w, int h)
-{
- int i;
-
- for (i = 0; i < N_RES; i++) {
- if (w != ov5693_res[i].width)
- continue;
- if (h != ov5693_res[i].height)
- continue;
-
- return i;
- }
-
- return -1;
-}
-
-/* TODO: remove it. */
-static int startup(struct v4l2_subdev *sd)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- ret = ov5693_write_reg(client, OV5693_8BIT,
- OV5693_SW_RESET, 0x01);
- if (ret) {
- dev_err(&client->dev, "ov5693 reset err.\n");
- return ret;
- }
-
- ret = ov5693_write_reg_array(client, ov5693_global_setting);
- if (ret) {
- dev_err(&client->dev, "ov5693 write register err.\n");
- return ret;
- }
-
- ret = ov5693_write_reg_array(client, ov5693_res[dev->fmt_idx].regs);
- if (ret) {
- dev_err(&client->dev, "ov5693 write register err.\n");
- return ret;
- }
-
- return ret;
-}
-
-static int ov5693_set_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *fmt = &format->format;
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- struct camera_mipi_info *ov5693_info = NULL;
- int ret = 0;
- int idx;
-
- if (format->pad)
- return -EINVAL;
- if (!fmt)
- return -EINVAL;
- ov5693_info = v4l2_get_subdev_hostdata(sd);
- if (!ov5693_info)
- return -EINVAL;
-
- mutex_lock(&dev->input_lock);
- idx = nearest_resolution_index(fmt->width, fmt->height);
- if (idx == -1) {
- /* return the largest resolution */
- fmt->width = ov5693_res[N_RES - 1].width;
- fmt->height = ov5693_res[N_RES - 1].height;
- } else {
- fmt->width = ov5693_res[idx].width;
- fmt->height = ov5693_res[idx].height;
- }
-
- fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
- sd_state->pads->try_fmt = *fmt;
- mutex_unlock(&dev->input_lock);
- return 0;
- }
-
- dev->fmt_idx = get_resolution_index(fmt->width, fmt->height);
- if (dev->fmt_idx == -1) {
- dev_err(&client->dev, "get resolution fail\n");
- mutex_unlock(&dev->input_lock);
- return -EINVAL;
- }
-
- ret = startup(sd);
- if (ret) {
- int i = 0;
-
- dev_err(&client->dev, "ov5693 startup err, retry to power up\n");
- for (i = 0; i < OV5693_POWER_UP_RETRY_NUM; i++) {
- dev_err(&client->dev,
- "ov5693 retry to power up %d/%d times, result: ",
- i + 1, OV5693_POWER_UP_RETRY_NUM);
- power_down(sd);
- ret = power_up(sd);
- if (!ret) {
- mutex_unlock(&dev->input_lock);
- ov5693_init(sd);
- mutex_lock(&dev->input_lock);
- } else {
- dev_err(&client->dev, "power up failed, continue\n");
- continue;
- }
- ret = startup(sd);
- if (ret) {
- dev_err(&client->dev, " startup FAILED!\n");
- } else {
- dev_err(&client->dev, " startup SUCCESS!\n");
- break;
- }
- }
- }
-
- /*
- * After sensor settings are set to HW, sometimes stream is started.
- * This would cause ISP timeout because ISP is not ready to receive
- * data yet. So add stop streaming here.
- */
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_SW_STREAM,
- OV5693_STOP_STREAMING);
- if (ret)
- dev_warn(&client->dev, "ov5693 stream off err\n");
-
- ov5693_info->metadata_width = fmt->width * 10 / 8;
- ov5693_info->metadata_height = 1;
- ov5693_info->metadata_effective_width = &ov5693_embedded_effective_size;
-
- mutex_unlock(&dev->input_lock);
- return ret;
-}
-
-static int ov5693_get_fmt(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_format *format)
-{
- struct v4l2_mbus_framefmt *fmt = &format->format;
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- if (format->pad)
- return -EINVAL;
-
- if (!fmt)
- return -EINVAL;
-
- fmt->width = ov5693_res[dev->fmt_idx].width;
- fmt->height = ov5693_res[dev->fmt_idx].height;
- fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
-
- return 0;
-}
-
-static int ov5693_detect(struct i2c_client *client)
-{
- struct i2c_adapter *adapter = client->adapter;
- u16 high, low;
- int ret;
- u16 id;
- u8 revision;
-
- if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
- return -ENODEV;
-
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_SC_CMMN_CHIP_ID_H, &high);
- if (ret) {
- dev_err(&client->dev, "sensor_id_high = 0x%x\n", high);
- return -ENODEV;
- }
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_SC_CMMN_CHIP_ID_L, &low);
- if (ret)
- return ret;
- id = ((((u16)high) << 8) | (u16)low);
-
- if (id != OV5693_ID) {
- dev_err(&client->dev, "sensor ID error 0x%x\n", id);
- return -ENODEV;
- }
-
- ret = ov5693_read_reg(client, OV5693_8BIT,
- OV5693_SC_CMMN_SUB_ID, &high);
- revision = (u8)high & 0x0f;
-
- dev_dbg(&client->dev, "sensor_revision = 0x%x\n", revision);
- dev_dbg(&client->dev, "detect ov5693 success\n");
- return 0;
-}
-
-static int ov5693_s_stream(struct v4l2_subdev *sd, int enable)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
-
- mutex_lock(&dev->input_lock);
-
- ret = ov5693_write_reg(client, OV5693_8BIT, OV5693_SW_STREAM,
- enable ? OV5693_START_STREAMING :
- OV5693_STOP_STREAMING);
-
- mutex_unlock(&dev->input_lock);
-
- return ret;
-}
-
-static int ov5693_s_config(struct v4l2_subdev *sd,
- int irq, void *platform_data)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
- struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret = 0;
-
- if (!platform_data)
- return -ENODEV;
-
- dev->platform_data =
- (struct camera_sensor_platform_data *)platform_data;
-
- mutex_lock(&dev->input_lock);
- /* power off the module, then power on it in future
- * as first power on by board may not fulfill the
- * power on sequqence needed by the module
- */
- ret = power_down(sd);
- if (ret) {
- dev_err(&client->dev, "ov5693 power-off err.\n");
- goto fail_power_off;
- }
-
- ret = power_up(sd);
- if (ret) {
- dev_err(&client->dev, "ov5693 power-up err.\n");
- goto fail_power_on;
- }
-
- if (!dev->vcm)
- dev->vcm = vcm_detect(client);
-
- ret = dev->platform_data->csi_cfg(sd, 1);
- if (ret)
- goto fail_csi_cfg;
-
- /* config & detect sensor */
- ret = ov5693_detect(client);
- if (ret) {
- dev_err(&client->dev, "ov5693_detect err s_config.\n");
- goto fail_csi_cfg;
- }
-
- dev->otp_data = ov5693_otp_read(sd);
-
- /* turn off sensor, after probed */
- ret = power_down(sd);
- if (ret) {
- dev_err(&client->dev, "ov5693 power-off err.\n");
- goto fail_csi_cfg;
- }
- mutex_unlock(&dev->input_lock);
-
- return ret;
-
-fail_csi_cfg:
- dev->platform_data->csi_cfg(sd, 0);
-fail_power_on:
- power_down(sd);
- dev_err(&client->dev, "sensor power-gating failed\n");
-fail_power_off:
- mutex_unlock(&dev->input_lock);
- return ret;
-}
-
-static int ov5693_g_frame_interval(struct v4l2_subdev *sd,
- struct v4l2_subdev_frame_interval *interval)
-{
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- interval->interval.numerator = 1;
- interval->interval.denominator = ov5693_res[dev->fmt_idx].fps;
-
- return 0;
-}
-
-static int ov5693_enum_mbus_code(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_mbus_code_enum *code)
-{
- if (code->index >= MAX_FMTS)
- return -EINVAL;
-
- code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
- return 0;
-}
-
-static int ov5693_enum_frame_size(struct v4l2_subdev *sd,
- struct v4l2_subdev_state *sd_state,
- struct v4l2_subdev_frame_size_enum *fse)
-{
- int index = fse->index;
-
- if (index >= N_RES)
- return -EINVAL;
-
- fse->min_width = ov5693_res[index].width;
- fse->min_height = ov5693_res[index].height;
- fse->max_width = ov5693_res[index].width;
- fse->max_height = ov5693_res[index].height;
-
- return 0;
-}
-
-static const struct v4l2_subdev_video_ops ov5693_video_ops = {
- .s_stream = ov5693_s_stream,
- .g_frame_interval = ov5693_g_frame_interval,
-};
-
-static const struct v4l2_subdev_core_ops ov5693_core_ops = {
- .s_power = ov5693_s_power,
- .ioctl = ov5693_ioctl,
-};
-
-static const struct v4l2_subdev_pad_ops ov5693_pad_ops = {
- .enum_mbus_code = ov5693_enum_mbus_code,
- .enum_frame_size = ov5693_enum_frame_size,
- .get_fmt = ov5693_get_fmt,
- .set_fmt = ov5693_set_fmt,
-};
-
-static const struct v4l2_subdev_ops ov5693_ops = {
- .core = &ov5693_core_ops,
- .video = &ov5693_video_ops,
- .pad = &ov5693_pad_ops,
-};
-
-static void ov5693_remove(struct i2c_client *client)
-{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct ov5693_device *dev = to_ov5693_sensor(sd);
-
- dev_dbg(&client->dev, "ov5693_remove...\n");
-
- dev->platform_data->csi_cfg(sd, 0);
-
- v4l2_device_unregister_subdev(sd);
-
- atomisp_gmin_remove_subdev(sd);
-
- media_entity_cleanup(&dev->sd.entity);
- v4l2_ctrl_handler_free(&dev->ctrl_handler);
- kfree(dev);
-}
-
-static int ov5693_probe(struct i2c_client *client)
-{
- struct ov5693_device *dev;
- int i2c;
- int ret;
- void *pdata;
- unsigned int i;
-
- /*
- * Firmware workaround: Some modules use a "secondary default"
- * address of 0x10 which doesn't appear on schematics, and
- * some BIOS versions haven't gotten the memo. Work around
- * via config.
- */
- i2c = gmin_get_var_int(&client->dev, false, "I2CAddr", -1);
- if (i2c != -1) {
- dev_info(&client->dev,
- "Overriding firmware-provided I2C address (0x%x) with 0x%x\n",
- client->addr, i2c);
- client->addr = i2c;
- }
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- mutex_init(&dev->input_lock);
-
- dev->fmt_idx = 0;
- v4l2_i2c_subdev_init(&dev->sd, client, &ov5693_ops);
-
- pdata = gmin_camera_platform_data(&dev->sd,
- ATOMISP_INPUT_FORMAT_RAW_10,
- atomisp_bayer_order_bggr);
- if (!pdata) {
- ret = -EINVAL;
- goto out_free;
- }
-
- ret = ov5693_s_config(&dev->sd, client->irq, pdata);
- if (ret)
- goto out_free;
-
- ret = atomisp_register_i2c_module(&dev->sd, pdata, RAW_CAMERA);
- if (ret)
- goto out_free;
-
- dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
- dev->pad.flags = MEDIA_PAD_FL_SOURCE;
- dev->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
- dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
- ret =
- v4l2_ctrl_handler_init(&dev->ctrl_handler,
- ARRAY_SIZE(ov5693_controls));
- if (ret) {
- ov5693_remove(client);
- return ret;
- }
-
- for (i = 0; i < ARRAY_SIZE(ov5693_controls); i++)
- v4l2_ctrl_new_custom(&dev->ctrl_handler, &ov5693_controls[i],
- NULL);
-
- if (dev->ctrl_handler.error) {
- ov5693_remove(client);
- return dev->ctrl_handler.error;
- }
-
- /* Use same lock for controls as for everything else. */
- dev->ctrl_handler.lock = &dev->input_lock;
- dev->sd.ctrl_handler = &dev->ctrl_handler;
-
- ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
- if (ret)
- ov5693_remove(client);
-
- return ret;
-out_free:
- v4l2_device_unregister_subdev(&dev->sd);
- kfree(dev);
- return ret;
-}
-
-static const struct acpi_device_id ov5693_acpi_match[] = {
- {"INT33BE"},
- {},
-};
-MODULE_DEVICE_TABLE(acpi, ov5693_acpi_match);
-
-static struct i2c_driver ov5693_driver = {
- .driver = {
- .name = "ov5693",
- .acpi_match_table = ov5693_acpi_match,
- },
- .probe = ov5693_probe,
- .remove = ov5693_remove,
-};
-module_i2c_driver(ov5693_driver);
-
-MODULE_DESCRIPTION("A low-level driver for OmniVision 5693 sensors");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Support for OmniVision OV5693 5M camera sensor.
- *
- * Copyright (c) 2013 Intel Corporation. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
- */
-
-#ifndef __OV5693_H__
-#define __OV5693_H__
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/videodev2.h>
-#include <linux/spinlock.h>
-#include <media/v4l2-subdev.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-#include <linux/v4l2-mediabus.h>
-#include <media/media-entity.h>
-
-#include "../../include/linux/atomisp_platform.h"
-
-/*
- * FIXME: non-preview resolutions are currently broken
- */
-#define ENABLE_NON_PREVIEW 0
-
-#define OV5693_POWER_UP_RETRY_NUM 5
-
-/* Defines for register writes and register array processing */
-#define I2C_MSG_LENGTH 0x2
-#define I2C_RETRY_COUNT 5
-
-#define OV5693_FOCAL_LENGTH_NUM 334 /*3.34mm*/
-#define OV5693_FOCAL_LENGTH_DEM 100
-#define OV5693_F_NUMBER_DEFAULT_NUM 24
-#define OV5693_F_NUMBER_DEM 10
-
-#define MAX_FMTS 1
-
-/* sensor_mode_data read_mode adaptation */
-#define OV5693_READ_MODE_BINNING_ON 0x0400
-#define OV5693_READ_MODE_BINNING_OFF 0x00
-#define OV5693_INTEGRATION_TIME_MARGIN 8
-
-#define OV5693_MAX_EXPOSURE_VALUE 0xFFF1
-#define OV5693_MAX_GAIN_VALUE 0xFF
-
-/*
- * focal length bits definition:
- * bits 31-16: numerator, bits 15-0: denominator
- */
-#define OV5693_FOCAL_LENGTH_DEFAULT 0x1B70064
-
-/*
- * current f-number bits definition:
- * bits 31-16: numerator, bits 15-0: denominator
- */
-#define OV5693_F_NUMBER_DEFAULT 0x18000a
-
-/*
- * f-number range bits definition:
- * bits 31-24: max f-number numerator
- * bits 23-16: max f-number denominator
- * bits 15-8: min f-number numerator
- * bits 7-0: min f-number denominator
- */
-#define OV5693_F_NUMBER_RANGE 0x180a180a
-#define OV5693_ID 0x5690
-
-#define OV5693_FINE_INTG_TIME_MIN 0
-#define OV5693_FINE_INTG_TIME_MAX_MARGIN 0
-#define OV5693_COARSE_INTG_TIME_MIN 1
-#define OV5693_COARSE_INTG_TIME_MAX_MARGIN 6
-
-#define OV5693_BIN_FACTOR_MAX 4
-/*
- * OV5693 System control registers
- */
-#define OV5693_SW_SLEEP 0x0100
-#define OV5693_SW_RESET 0x0103
-#define OV5693_SW_STREAM 0x0100
-
-#define OV5693_SC_CMMN_CHIP_ID_H 0x300A
-#define OV5693_SC_CMMN_CHIP_ID_L 0x300B
-#define OV5693_SC_CMMN_SCCB_ID 0x300C
-#define OV5693_SC_CMMN_SUB_ID 0x302A /* process, version*/
-/*Bit[7:4] Group control, Bit[3:0] Group ID*/
-#define OV5693_GROUP_ACCESS 0x3208
-/*
-*Bit[3:0] Bit[19:16] of exposure,
-*remaining 16 bits lies in Reg0x3501&Reg0x3502
-*/
-#define OV5693_EXPOSURE_H 0x3500
-#define OV5693_EXPOSURE_M 0x3501
-#define OV5693_EXPOSURE_L 0x3502
-/*Bit[1:0] means Bit[9:8] of gain*/
-#define OV5693_AGC_H 0x350A
-#define OV5693_AGC_L 0x350B /*Bit[7:0] of gain*/
-
-#define OV5693_HORIZONTAL_START_H 0x3800 /*Bit[11:8]*/
-#define OV5693_HORIZONTAL_START_L 0x3801 /*Bit[7:0]*/
-#define OV5693_VERTICAL_START_H 0x3802 /*Bit[11:8]*/
-#define OV5693_VERTICAL_START_L 0x3803 /*Bit[7:0]*/
-#define OV5693_HORIZONTAL_END_H 0x3804 /*Bit[11:8]*/
-#define OV5693_HORIZONTAL_END_L 0x3805 /*Bit[7:0]*/
-#define OV5693_VERTICAL_END_H 0x3806 /*Bit[11:8]*/
-#define OV5693_VERTICAL_END_L 0x3807 /*Bit[7:0]*/
-#define OV5693_HORIZONTAL_OUTPUT_SIZE_H 0x3808 /*Bit[3:0]*/
-#define OV5693_HORIZONTAL_OUTPUT_SIZE_L 0x3809 /*Bit[7:0]*/
-#define OV5693_VERTICAL_OUTPUT_SIZE_H 0x380a /*Bit[3:0]*/
-#define OV5693_VERTICAL_OUTPUT_SIZE_L 0x380b /*Bit[7:0]*/
-/*High 8-bit, and low 8-bit HTS address is 0x380d*/
-#define OV5693_TIMING_HTS_H 0x380C
-/*High 8-bit, and low 8-bit HTS address is 0x380d*/
-#define OV5693_TIMING_HTS_L 0x380D
-/*High 8-bit, and low 8-bit HTS address is 0x380f*/
-#define OV5693_TIMING_VTS_H 0x380e
-/*High 8-bit, and low 8-bit HTS address is 0x380f*/
-#define OV5693_TIMING_VTS_L 0x380f
-
-#define OV5693_MWB_RED_GAIN_H 0x3400
-#define OV5693_MWB_GREEN_GAIN_H 0x3402
-#define OV5693_MWB_BLUE_GAIN_H 0x3404
-#define OV5693_MWB_GAIN_MAX 0x0fff
-
-#define OV5693_START_STREAMING 0x01
-#define OV5693_STOP_STREAMING 0x00
-
-#define VCM_ADDR 0x0c
-#define VCM_CODE_MSB 0x04
-
-#define OV5693_INVALID_CONFIG 0xffffffff
-
-#define OV5693_VCM_SLEW_STEP 0x30F0
-#define OV5693_VCM_SLEW_STEP_MAX 0x7
-#define OV5693_VCM_SLEW_STEP_MASK 0x7
-#define OV5693_VCM_CODE 0x30F2
-#define OV5693_VCM_SLEW_TIME 0x30F4
-#define OV5693_VCM_SLEW_TIME_MAX 0xffff
-#define OV5693_VCM_ENABLE 0x8000
-
-#define OV5693_VCM_MAX_FOCUS_NEG -1023
-#define OV5693_VCM_MAX_FOCUS_POS 1023
-
-#define DLC_ENABLE 1
-#define DLC_DISABLE 0
-#define VCM_PROTECTION_OFF 0xeca3
-#define VCM_PROTECTION_ON 0xdc51
-#define VCM_DEFAULT_S 0x0
-#define vcm_step_s(a) (u8)(a & 0xf)
-#define vcm_step_mclk(a) (u8)((a >> 4) & 0x3)
-#define vcm_dlc_mclk(dlc, mclk) (u16)((dlc << 3) | mclk | 0xa104)
-#define vcm_tsrc(tsrc) (u16)(tsrc << 3 | 0xf200)
-#define vcm_val(data, s) (u16)(data << 4 | s)
-#define DIRECT_VCM vcm_dlc_mclk(0, 0)
-
-/* Defines for OTP Data Registers */
-#define OV5693_FRAME_OFF_NUM 0x4202
-#define OV5693_OTP_BYTE_MAX 32 //change to 32 as needed by otpdata
-#define OV5693_OTP_SHORT_MAX 16
-#define OV5693_OTP_START_ADDR 0x3D00
-#define OV5693_OTP_END_ADDR 0x3D0F
-#define OV5693_OTP_DATA_SIZE 320
-#define OV5693_OTP_PROGRAM_REG 0x3D80
-#define OV5693_OTP_READ_REG 0x3D81 // 1:Enable 0:disable
-#define OV5693_OTP_BANK_REG 0x3D84 //otp bank and mode
-#define OV5693_OTP_READY_REG_DONE 1
-#define OV5693_OTP_BANK_MAX 28
-#define OV5693_OTP_BANK_SIZE 16 //16 bytes per bank
-#define OV5693_OTP_READ_ONETIME 16
-#define OV5693_OTP_MODE_READ 1
-
-struct regval_list {
- u16 reg_num;
- u8 value;
-};
-
-struct ov5693_resolution {
- u8 *desc;
- const struct ov5693_reg *regs;
- int res;
- int width;
- int height;
- int fps;
- int pix_clk_freq;
- u16 pixels_per_line;
- u16 lines_per_frame;
- bool used;
-};
-
-struct ov5693_format {
- u8 *desc;
- u32 pixelformat;
- struct ov5693_reg *regs;
-};
-
-enum vcm_type {
- VCM_UNKNOWN,
- VCM_AD5823,
- VCM_DW9714,
-};
-
-/*
- * ov5693 device structure.
- */
-struct ov5693_device {
- struct v4l2_subdev sd;
- struct media_pad pad;
- struct v4l2_mbus_framefmt format;
- struct mutex input_lock;
- struct v4l2_ctrl_handler ctrl_handler;
-
- struct camera_sensor_platform_data *platform_data;
- ktime_t timestamp_t_focus_abs;
- int fmt_idx;
- int run_mode;
- int otp_size;
- u8 *otp_data;
- u32 focus;
- s16 number_of_steps;
- u8 res;
- u8 type;
- bool vcm_update;
- enum vcm_type vcm;
-};
-
-enum ov5693_tok_type {
- OV5693_8BIT = 0x0001,
- OV5693_16BIT = 0x0002,
- OV5693_32BIT = 0x0004,
- OV5693_TOK_TERM = 0xf000, /* terminating token for reg list */
- OV5693_TOK_DELAY = 0xfe00, /* delay token for reg list */
- OV5693_TOK_MASK = 0xfff0
-};
-
-/**
- * struct ov5693_reg - MI sensor register format
- * @type: type of the register
- * @reg: 16-bit offset to register
- * @val: 8/16/32-bit register value
- *
- * Define a structure for sensor register initialization values
- */
-struct ov5693_reg {
- enum ov5693_tok_type type;
- u16 reg;
- u32 val; /* @set value for read/mod/write, @mask */
-};
-
-#define to_ov5693_sensor(x) container_of(x, struct ov5693_device, sd)
-
-#define OV5693_MAX_WRITE_BUF_SIZE 30
-
-struct ov5693_write_buffer {
- u16 addr;
- u8 data[OV5693_MAX_WRITE_BUF_SIZE];
-};
-
-struct ov5693_write_ctrl {
- int index;
- struct ov5693_write_buffer buffer;
-};
-
-static struct ov5693_reg const ov5693_global_setting[] = {
- {OV5693_8BIT, 0x0103, 0x01},
- {OV5693_8BIT, 0x3001, 0x0a},
- {OV5693_8BIT, 0x3002, 0x80},
- {OV5693_8BIT, 0x3006, 0x00},
- {OV5693_8BIT, 0x3011, 0x21},
- {OV5693_8BIT, 0x3012, 0x09},
- {OV5693_8BIT, 0x3013, 0x10},
- {OV5693_8BIT, 0x3014, 0x00},
- {OV5693_8BIT, 0x3015, 0x08},
- {OV5693_8BIT, 0x3016, 0xf0},
- {OV5693_8BIT, 0x3017, 0xf0},
- {OV5693_8BIT, 0x3018, 0xf0},
- {OV5693_8BIT, 0x301b, 0xb4},
- {OV5693_8BIT, 0x301d, 0x02},
- {OV5693_8BIT, 0x3021, 0x00},
- {OV5693_8BIT, 0x3022, 0x01},
- {OV5693_8BIT, 0x3028, 0x44},
- {OV5693_8BIT, 0x3098, 0x02},
- {OV5693_8BIT, 0x3099, 0x19},
- {OV5693_8BIT, 0x309a, 0x02},
- {OV5693_8BIT, 0x309b, 0x01},
- {OV5693_8BIT, 0x309c, 0x00},
- {OV5693_8BIT, 0x30a0, 0xd2},
- {OV5693_8BIT, 0x30a2, 0x01},
- {OV5693_8BIT, 0x30b2, 0x00},
- {OV5693_8BIT, 0x30b3, 0x7d},
- {OV5693_8BIT, 0x30b4, 0x03},
- {OV5693_8BIT, 0x30b5, 0x04},
- {OV5693_8BIT, 0x30b6, 0x01},
- {OV5693_8BIT, 0x3104, 0x21},
- {OV5693_8BIT, 0x3106, 0x00},
- {OV5693_8BIT, 0x3400, 0x04},
- {OV5693_8BIT, 0x3401, 0x00},
- {OV5693_8BIT, 0x3402, 0x04},
- {OV5693_8BIT, 0x3403, 0x00},
- {OV5693_8BIT, 0x3404, 0x04},
- {OV5693_8BIT, 0x3405, 0x00},
- {OV5693_8BIT, 0x3406, 0x01},
- {OV5693_8BIT, 0x3500, 0x00},
- {OV5693_8BIT, 0x3503, 0x07},
- {OV5693_8BIT, 0x3504, 0x00},
- {OV5693_8BIT, 0x3505, 0x00},
- {OV5693_8BIT, 0x3506, 0x00},
- {OV5693_8BIT, 0x3507, 0x02},
- {OV5693_8BIT, 0x3508, 0x00},
- {OV5693_8BIT, 0x3509, 0x10},
- {OV5693_8BIT, 0x350a, 0x00},
- {OV5693_8BIT, 0x350b, 0x40},
- {OV5693_8BIT, 0x3601, 0x0a},
- {OV5693_8BIT, 0x3602, 0x38},
- {OV5693_8BIT, 0x3612, 0x80},
- {OV5693_8BIT, 0x3620, 0x54},
- {OV5693_8BIT, 0x3621, 0xc7},
- {OV5693_8BIT, 0x3622, 0x0f},
- {OV5693_8BIT, 0x3625, 0x10},
- {OV5693_8BIT, 0x3630, 0x55},
- {OV5693_8BIT, 0x3631, 0xf4},
- {OV5693_8BIT, 0x3632, 0x00},
- {OV5693_8BIT, 0x3633, 0x34},
- {OV5693_8BIT, 0x3634, 0x02},
- {OV5693_8BIT, 0x364d, 0x0d},
- {OV5693_8BIT, 0x364f, 0xdd},
- {OV5693_8BIT, 0x3660, 0x04},
- {OV5693_8BIT, 0x3662, 0x10},
- {OV5693_8BIT, 0x3663, 0xf1},
- {OV5693_8BIT, 0x3665, 0x00},
- {OV5693_8BIT, 0x3666, 0x20},
- {OV5693_8BIT, 0x3667, 0x00},
- {OV5693_8BIT, 0x366a, 0x80},
- {OV5693_8BIT, 0x3680, 0xe0},
- {OV5693_8BIT, 0x3681, 0x00},
- {OV5693_8BIT, 0x3700, 0x42},
- {OV5693_8BIT, 0x3701, 0x14},
- {OV5693_8BIT, 0x3702, 0xa0},
- {OV5693_8BIT, 0x3703, 0xd8},
- {OV5693_8BIT, 0x3704, 0x78},
- {OV5693_8BIT, 0x3705, 0x02},
- {OV5693_8BIT, 0x370a, 0x00},
- {OV5693_8BIT, 0x370b, 0x20},
- {OV5693_8BIT, 0x370c, 0x0c},
- {OV5693_8BIT, 0x370d, 0x11},
- {OV5693_8BIT, 0x370e, 0x00},
- {OV5693_8BIT, 0x370f, 0x40},
- {OV5693_8BIT, 0x3710, 0x00},
- {OV5693_8BIT, 0x371a, 0x1c},
- {OV5693_8BIT, 0x371b, 0x05},
- {OV5693_8BIT, 0x371c, 0x01},
- {OV5693_8BIT, 0x371e, 0xa1},
- {OV5693_8BIT, 0x371f, 0x0c},
- {OV5693_8BIT, 0x3721, 0x00},
- {OV5693_8BIT, 0x3724, 0x10},
- {OV5693_8BIT, 0x3726, 0x00},
- {OV5693_8BIT, 0x372a, 0x01},
- {OV5693_8BIT, 0x3730, 0x10},
- {OV5693_8BIT, 0x3738, 0x22},
- {OV5693_8BIT, 0x3739, 0xe5},
- {OV5693_8BIT, 0x373a, 0x50},
- {OV5693_8BIT, 0x373b, 0x02},
- {OV5693_8BIT, 0x373c, 0x41},
- {OV5693_8BIT, 0x373f, 0x02},
- {OV5693_8BIT, 0x3740, 0x42},
- {OV5693_8BIT, 0x3741, 0x02},
- {OV5693_8BIT, 0x3742, 0x18},
- {OV5693_8BIT, 0x3743, 0x01},
- {OV5693_8BIT, 0x3744, 0x02},
- {OV5693_8BIT, 0x3747, 0x10},
- {OV5693_8BIT, 0x374c, 0x04},
- {OV5693_8BIT, 0x3751, 0xf0},
- {OV5693_8BIT, 0x3752, 0x00},
- {OV5693_8BIT, 0x3753, 0x00},
- {OV5693_8BIT, 0x3754, 0xc0},
- {OV5693_8BIT, 0x3755, 0x00},
- {OV5693_8BIT, 0x3756, 0x1a},
- {OV5693_8BIT, 0x3758, 0x00},
- {OV5693_8BIT, 0x3759, 0x0f},
- {OV5693_8BIT, 0x376b, 0x44},
- {OV5693_8BIT, 0x375c, 0x04},
- {OV5693_8BIT, 0x3774, 0x10},
- {OV5693_8BIT, 0x3776, 0x00},
- {OV5693_8BIT, 0x377f, 0x08},
- {OV5693_8BIT, 0x3780, 0x22},
- {OV5693_8BIT, 0x3781, 0x0c},
- {OV5693_8BIT, 0x3784, 0x2c},
- {OV5693_8BIT, 0x3785, 0x1e},
- {OV5693_8BIT, 0x378f, 0xf5},
- {OV5693_8BIT, 0x3791, 0xb0},
- {OV5693_8BIT, 0x3795, 0x00},
- {OV5693_8BIT, 0x3796, 0x64},
- {OV5693_8BIT, 0x3797, 0x11},
- {OV5693_8BIT, 0x3798, 0x30},
- {OV5693_8BIT, 0x3799, 0x41},
- {OV5693_8BIT, 0x379a, 0x07},
- {OV5693_8BIT, 0x379b, 0xb0},
- {OV5693_8BIT, 0x379c, 0x0c},
- {OV5693_8BIT, 0x37c5, 0x00},
- {OV5693_8BIT, 0x37c6, 0x00},
- {OV5693_8BIT, 0x37c7, 0x00},
- {OV5693_8BIT, 0x37c9, 0x00},
- {OV5693_8BIT, 0x37ca, 0x00},
- {OV5693_8BIT, 0x37cb, 0x00},
- {OV5693_8BIT, 0x37de, 0x00},
- {OV5693_8BIT, 0x37df, 0x00},
- {OV5693_8BIT, 0x3800, 0x00},
- {OV5693_8BIT, 0x3801, 0x00},
- {OV5693_8BIT, 0x3802, 0x00},
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3810, 0x00},
- {OV5693_8BIT, 0x3812, 0x00},
- {OV5693_8BIT, 0x3823, 0x00},
- {OV5693_8BIT, 0x3824, 0x00},
- {OV5693_8BIT, 0x3825, 0x00},
- {OV5693_8BIT, 0x3826, 0x00},
- {OV5693_8BIT, 0x3827, 0x00},
- {OV5693_8BIT, 0x382a, 0x04},
- {OV5693_8BIT, 0x3a04, 0x06},
- {OV5693_8BIT, 0x3a05, 0x14},
- {OV5693_8BIT, 0x3a06, 0x00},
- {OV5693_8BIT, 0x3a07, 0xfe},
- {OV5693_8BIT, 0x3b00, 0x00},
- {OV5693_8BIT, 0x3b02, 0x00},
- {OV5693_8BIT, 0x3b03, 0x00},
- {OV5693_8BIT, 0x3b04, 0x00},
- {OV5693_8BIT, 0x3b05, 0x00},
- {OV5693_8BIT, 0x3e07, 0x20},
- {OV5693_8BIT, 0x4000, 0x08},
- {OV5693_8BIT, 0x4001, 0x04},
- {OV5693_8BIT, 0x4002, 0x45},
- {OV5693_8BIT, 0x4004, 0x08},
- {OV5693_8BIT, 0x4005, 0x18},
- {OV5693_8BIT, 0x4006, 0x20},
- {OV5693_8BIT, 0x4008, 0x24},
- {OV5693_8BIT, 0x4009, 0x10},
- {OV5693_8BIT, 0x400c, 0x00},
- {OV5693_8BIT, 0x400d, 0x00},
- {OV5693_8BIT, 0x4058, 0x00},
- {OV5693_8BIT, 0x404e, 0x37},
- {OV5693_8BIT, 0x404f, 0x8f},
- {OV5693_8BIT, 0x4058, 0x00},
- {OV5693_8BIT, 0x4101, 0xb2},
- {OV5693_8BIT, 0x4303, 0x00},
- {OV5693_8BIT, 0x4304, 0x08},
- {OV5693_8BIT, 0x4307, 0x31},
- {OV5693_8BIT, 0x4311, 0x04},
- {OV5693_8BIT, 0x4315, 0x01},
- {OV5693_8BIT, 0x4511, 0x05},
- {OV5693_8BIT, 0x4512, 0x01},
- {OV5693_8BIT, 0x4806, 0x00},
- {OV5693_8BIT, 0x4816, 0x52},
- {OV5693_8BIT, 0x481f, 0x30},
- {OV5693_8BIT, 0x4826, 0x2c},
- {OV5693_8BIT, 0x4831, 0x64},
- {OV5693_8BIT, 0x4d00, 0x04},
- {OV5693_8BIT, 0x4d01, 0x71},
- {OV5693_8BIT, 0x4d02, 0xfd},
- {OV5693_8BIT, 0x4d03, 0xf5},
- {OV5693_8BIT, 0x4d04, 0x0c},
- {OV5693_8BIT, 0x4d05, 0xcc},
- {OV5693_8BIT, 0x4837, 0x0a},
- {OV5693_8BIT, 0x5000, 0x06},
- {OV5693_8BIT, 0x5001, 0x01},
- {OV5693_8BIT, 0x5003, 0x20},
- {OV5693_8BIT, 0x5046, 0x0a},
- {OV5693_8BIT, 0x5013, 0x00},
- {OV5693_8BIT, 0x5046, 0x0a},
- {OV5693_8BIT, 0x5780, 0x1c},
- {OV5693_8BIT, 0x5786, 0x20},
- {OV5693_8BIT, 0x5787, 0x10},
- {OV5693_8BIT, 0x5788, 0x18},
- {OV5693_8BIT, 0x578a, 0x04},
- {OV5693_8BIT, 0x578b, 0x02},
- {OV5693_8BIT, 0x578c, 0x02},
- {OV5693_8BIT, 0x578e, 0x06},
- {OV5693_8BIT, 0x578f, 0x02},
- {OV5693_8BIT, 0x5790, 0x02},
- {OV5693_8BIT, 0x5791, 0xff},
- {OV5693_8BIT, 0x5842, 0x01},
- {OV5693_8BIT, 0x5843, 0x2b},
- {OV5693_8BIT, 0x5844, 0x01},
- {OV5693_8BIT, 0x5845, 0x92},
- {OV5693_8BIT, 0x5846, 0x01},
- {OV5693_8BIT, 0x5847, 0x8f},
- {OV5693_8BIT, 0x5848, 0x01},
- {OV5693_8BIT, 0x5849, 0x0c},
- {OV5693_8BIT, 0x5e00, 0x00},
- {OV5693_8BIT, 0x5e10, 0x0c},
- {OV5693_8BIT, 0x0100, 0x00},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-#if ENABLE_NON_PREVIEW
-/*
- * 654x496 30fps 17ms VBlanking 2lane 10Bit (Scaling)
- */
-static struct ov5693_reg const ov5693_654x496[] = {
- {OV5693_8BIT, 0x3501, 0x3d},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe6},
- {OV5693_8BIT, 0x3709, 0xc7},
- {OV5693_8BIT, 0x3803, 0x00},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xa3},
- {OV5693_8BIT, 0x3808, 0x02},
- {OV5693_8BIT, 0x3809, 0x90},
- {OV5693_8BIT, 0x380a, 0x01},
- {OV5693_8BIT, 0x380b, 0xf0},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x08},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x04},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*
- * 1296x976 30fps 17ms VBlanking 2lane 10Bit (Scaling)
-*DS from 2592x1952
-*/
-static struct ov5693_reg const ov5693_1296x976[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
-
- {OV5693_8BIT, 0x3800, 0x00},
- {OV5693_8BIT, 0x3801, 0x00},
- {OV5693_8BIT, 0x3802, 0x00},
- {OV5693_8BIT, 0x3803, 0x00},
-
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xA3},
-
- {OV5693_8BIT, 0x3808, 0x05},
- {OV5693_8BIT, 0x3809, 0x10},
- {OV5693_8BIT, 0x380a, 0x03},
- {OV5693_8BIT, 0x380b, 0xD0},
-
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
-
- {OV5693_8BIT, 0x3810, 0x00},
- {OV5693_8BIT, 0x3811, 0x10},
- {OV5693_8BIT, 0x3812, 0x00},
- {OV5693_8BIT, 0x3813, 0x02},
-
- {OV5693_8BIT, 0x3814, 0x11}, /*X subsample control*/
- {OV5693_8BIT, 0x3815, 0x11}, /*Y subsample control*/
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x5041, 0x84}, /* scale is auto enabled */
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-
-};
-
-/*
- * 336x256 30fps 17ms VBlanking 2lane 10Bit (Scaling)
- DS from 2564x1956
- */
-static struct ov5693_reg const ov5693_336x256[] = {
- {OV5693_8BIT, 0x3501, 0x3d},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe6},
- {OV5693_8BIT, 0x3709, 0xc7},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xa3},
- {OV5693_8BIT, 0x3808, 0x01},
- {OV5693_8BIT, 0x3809, 0x50},
- {OV5693_8BIT, 0x380a, 0x01},
- {OV5693_8BIT, 0x380b, 0x00},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x1E},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x04},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*
- * 336x256 30fps 17ms VBlanking 2lane 10Bit (Scaling)
- DS from 2368x1956
- */
-static struct ov5693_reg const ov5693_368x304[] = {
- {OV5693_8BIT, 0x3501, 0x3d},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe6},
- {OV5693_8BIT, 0x3709, 0xc7},
- {OV5693_8BIT, 0x3808, 0x01},
- {OV5693_8BIT, 0x3809, 0x70},
- {OV5693_8BIT, 0x380a, 0x01},
- {OV5693_8BIT, 0x380b, 0x30},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x80},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x04},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*
- * ov5693_192x160 30fps 17ms VBlanking 2lane 10Bit (Scaling)
- DS from 2460x1956
- */
-static struct ov5693_reg const ov5693_192x160[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x80},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xA3},
- {OV5693_8BIT, 0x3808, 0x00},
- {OV5693_8BIT, 0x3809, 0xC0},
- {OV5693_8BIT, 0x380a, 0x00},
- {OV5693_8BIT, 0x380b, 0xA0},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x40},
- {OV5693_8BIT, 0x3813, 0x00},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x04},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-static struct ov5693_reg const ov5693_736x496[] = {
- {OV5693_8BIT, 0x3501, 0x3d},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe6},
- {OV5693_8BIT, 0x3709, 0xc7},
- {OV5693_8BIT, 0x3803, 0x68},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0x3b},
- {OV5693_8BIT, 0x3808, 0x02},
- {OV5693_8BIT, 0x3809, 0xe0},
- {OV5693_8BIT, 0x380a, 0x01},
- {OV5693_8BIT, 0x380b, 0xf0},
- {OV5693_8BIT, 0x380c, 0x0a}, /*hts*/
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07}, /*vts*/
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x08},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x04},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-#endif
-
-/*
-static struct ov5693_reg const ov5693_736x496[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe6},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0x00},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xa3},
- {OV5693_8BIT, 0x3808, 0x02},
- {OV5693_8BIT, 0x3809, 0xe0},
- {OV5693_8BIT, 0x380a, 0x01},
- {OV5693_8BIT, 0x380b, 0xf0},
- {OV5693_8BIT, 0x380c, 0x0d},
- {OV5693_8BIT, 0x380d, 0xb0},
- {OV5693_8BIT, 0x380e, 0x05},
- {OV5693_8BIT, 0x380f, 0xf2},
- {OV5693_8BIT, 0x3811, 0x08},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x31},
- {OV5693_8BIT, 0x3815, 0x31},
- {OV5693_8BIT, 0x3820, 0x01},
- {OV5693_8BIT, 0x3821, 0x1f},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-*/
-/*
- * 976x556 30fps 8.8ms VBlanking 2lane 10Bit (Scaling)
- */
-#if ENABLE_NON_PREVIEW
-static struct ov5693_reg const ov5693_976x556[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0xf0},
- {OV5693_8BIT, 0x3806, 0x06},
- {OV5693_8BIT, 0x3807, 0xa7},
- {OV5693_8BIT, 0x3808, 0x03},
- {OV5693_8BIT, 0x3809, 0xd0},
- {OV5693_8BIT, 0x380a, 0x02},
- {OV5693_8BIT, 0x380b, 0x2C},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x10},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*DS from 2624x1492*/
-static struct ov5693_reg const ov5693_1296x736[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
-
- {OV5693_8BIT, 0x3800, 0x00},
- {OV5693_8BIT, 0x3801, 0x00},
- {OV5693_8BIT, 0x3802, 0x00},
- {OV5693_8BIT, 0x3803, 0x00},
-
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xA3},
-
- {OV5693_8BIT, 0x3808, 0x05},
- {OV5693_8BIT, 0x3809, 0x10},
- {OV5693_8BIT, 0x380a, 0x02},
- {OV5693_8BIT, 0x380b, 0xe0},
-
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
-
- {OV5693_8BIT, 0x3813, 0xE8},
-
- {OV5693_8BIT, 0x3814, 0x11}, /*X subsample control*/
- {OV5693_8BIT, 0x3815, 0x11}, /*Y subsample control*/
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x5041, 0x84}, /* scale is auto enabled */
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-static struct ov5693_reg const ov5693_1636p_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0xf0},
- {OV5693_8BIT, 0x3806, 0x06},
- {OV5693_8BIT, 0x3807, 0xa7},
- {OV5693_8BIT, 0x3808, 0x06},
- {OV5693_8BIT, 0x3809, 0x64},
- {OV5693_8BIT, 0x380a, 0x04},
- {OV5693_8BIT, 0x380b, 0x48},
- {OV5693_8BIT, 0x380c, 0x0a}, /*hts*/
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07}, /*vts*/
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x02},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-#endif
-
-static struct ov5693_reg const ov5693_1616x1216_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x80},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3800, 0x00}, /*{3800,3801} Array X start*/
- {OV5693_8BIT, 0x3801, 0x08}, /* 04 //{3800,3801} Array X start*/
- {OV5693_8BIT, 0x3802, 0x00}, /*{3802,3803} Array Y start*/
- {OV5693_8BIT, 0x3803, 0x04}, /* 00 //{3802,3803} Array Y start*/
- {OV5693_8BIT, 0x3804, 0x0a}, /*{3804,3805} Array X end*/
- {OV5693_8BIT, 0x3805, 0x37}, /* 3b //{3804,3805} Array X end*/
- {OV5693_8BIT, 0x3806, 0x07}, /*{3806,3807} Array Y end*/
- {OV5693_8BIT, 0x3807, 0x9f}, /* a3 //{3806,3807} Array Y end*/
- {OV5693_8BIT, 0x3808, 0x06}, /*{3808,3809} Final output H size*/
- {OV5693_8BIT, 0x3809, 0x50}, /*{3808,3809} Final output H size*/
- {OV5693_8BIT, 0x380a, 0x04}, /*{380a,380b} Final output V size*/
- {OV5693_8BIT, 0x380b, 0xc0}, /*{380a,380b} Final output V size*/
- {OV5693_8BIT, 0x380c, 0x0a}, /*{380c,380d} HTS*/
- {OV5693_8BIT, 0x380d, 0x80}, /*{380c,380d} HTS*/
- {OV5693_8BIT, 0x380e, 0x07}, /*{380e,380f} VTS*/
- {OV5693_8BIT, 0x380f, 0xc0}, /* bc //{380e,380f} VTS*/
- {OV5693_8BIT, 0x3810, 0x00}, /*{3810,3811} windowing X offset*/
- {OV5693_8BIT, 0x3811, 0x10}, /*{3810,3811} windowing X offset*/
- {OV5693_8BIT, 0x3812, 0x00}, /*{3812,3813} windowing Y offset*/
- {OV5693_8BIT, 0x3813, 0x06}, /*{3812,3813} windowing Y offset*/
- {OV5693_8BIT, 0x3814, 0x11}, /*X subsample control*/
- {OV5693_8BIT, 0x3815, 0x11}, /*Y subsample control*/
- {OV5693_8BIT, 0x3820, 0x00}, /*FLIP/Binning control*/
- {OV5693_8BIT, 0x3821, 0x1e}, /*MIRROR control*/
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x5041, 0x84},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*
- * 1940x1096 30fps 8.8ms VBlanking 2lane 10bit (Scaling)
- */
-#if ENABLE_NON_PREVIEW
-static struct ov5693_reg const ov5693_1940x1096[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0xf0},
- {OV5693_8BIT, 0x3806, 0x06},
- {OV5693_8BIT, 0x3807, 0xa7},
- {OV5693_8BIT, 0x3808, 0x07},
- {OV5693_8BIT, 0x3809, 0x94},
- {OV5693_8BIT, 0x380a, 0x04},
- {OV5693_8BIT, 0x380b, 0x48},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x02},
- {OV5693_8BIT, 0x3813, 0x02},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x80},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-static struct ov5693_reg const ov5693_2592x1456_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3800, 0x00},
- {OV5693_8BIT, 0x3801, 0x00},
- {OV5693_8BIT, 0x3802, 0x00},
- {OV5693_8BIT, 0x3803, 0xf0},
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3806, 0x06},
- {OV5693_8BIT, 0x3807, 0xa4},
- {OV5693_8BIT, 0x3808, 0x0a},
- {OV5693_8BIT, 0x3809, 0x20},
- {OV5693_8BIT, 0x380a, 0x05},
- {OV5693_8BIT, 0x380b, 0xb0},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x10},
- {OV5693_8BIT, 0x3813, 0x00},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_TOK_TERM, 0, 0}
-};
-#endif
-
-static struct ov5693_reg const ov5693_2576x1456_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3800, 0x00},
- {OV5693_8BIT, 0x3801, 0x00},
- {OV5693_8BIT, 0x3802, 0x00},
- {OV5693_8BIT, 0x3803, 0xf0},
- {OV5693_8BIT, 0x3804, 0x0a},
- {OV5693_8BIT, 0x3805, 0x3f},
- {OV5693_8BIT, 0x3806, 0x06},
- {OV5693_8BIT, 0x3807, 0xa4},
- {OV5693_8BIT, 0x3808, 0x0a},
- {OV5693_8BIT, 0x3809, 0x10},
- {OV5693_8BIT, 0x380a, 0x05},
- {OV5693_8BIT, 0x380b, 0xb0},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x18},
- {OV5693_8BIT, 0x3813, 0x00},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-/*
- * 2592x1944 30fps 0.6ms VBlanking 2lane 10Bit
- */
-#if ENABLE_NON_PREVIEW
-static struct ov5693_reg const ov5693_2592x1944_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0x00},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xa3},
- {OV5693_8BIT, 0x3808, 0x0a},
- {OV5693_8BIT, 0x3809, 0x20},
- {OV5693_8BIT, 0x380a, 0x07},
- {OV5693_8BIT, 0x380b, 0x98},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x10},
- {OV5693_8BIT, 0x3813, 0x00},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-#endif
-
-/*
- * 11:9 Full FOV Output, expected FOV Res: 2346x1920
- * ISP Effect Res: 1408x1152
- * Sensor out: 1424x1168, DS From: 2380x1952
- *
- * WA: Left Offset: 8, Hor scal: 64
- */
-#if ENABLE_NON_PREVIEW
-static struct ov5693_reg const ov5693_1424x1168_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x3b}, /* long exposure[15:8] */
- {OV5693_8BIT, 0x3502, 0x80}, /* long exposure[7:0] */
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3800, 0x00}, /* TIMING_X_ADDR_START */
- {OV5693_8BIT, 0x3801, 0x50}, /* 80 */
- {OV5693_8BIT, 0x3802, 0x00}, /* TIMING_Y_ADDR_START */
- {OV5693_8BIT, 0x3803, 0x02}, /* 2 */
- {OV5693_8BIT, 0x3804, 0x09}, /* TIMING_X_ADDR_END */
- {OV5693_8BIT, 0x3805, 0xdd}, /* 2525 */
- {OV5693_8BIT, 0x3806, 0x07}, /* TIMING_Y_ADDR_END */
- {OV5693_8BIT, 0x3807, 0xa1}, /* 1953 */
- {OV5693_8BIT, 0x3808, 0x05}, /* TIMING_X_OUTPUT_SIZE */
- {OV5693_8BIT, 0x3809, 0x90}, /* 1424 */
- {OV5693_8BIT, 0x380a, 0x04}, /* TIMING_Y_OUTPUT_SIZE */
- {OV5693_8BIT, 0x380b, 0x90}, /* 1168 */
- {OV5693_8BIT, 0x380c, 0x0a}, /* TIMING_HTS */
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07}, /* TIMING_VTS */
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3810, 0x00}, /* TIMING_ISP_X_WIN */
- {OV5693_8BIT, 0x3811, 0x02}, /* 2 */
- {OV5693_8BIT, 0x3812, 0x00}, /* TIMING_ISP_Y_WIN */
- {OV5693_8BIT, 0x3813, 0x00}, /* 0 */
- {OV5693_8BIT, 0x3814, 0x11}, /* TIME_X_INC */
- {OV5693_8BIT, 0x3815, 0x11}, /* TIME_Y_INC */
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x5041, 0x84}, /* scale is auto enabled */
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-#endif
-
-/*
- * 3:2 Full FOV Output, expected FOV Res: 2560x1706
- * ISP Effect Res: 720x480
- * Sensor out: 736x496, DS From 2616x1764
- */
-static struct ov5693_reg const ov5693_736x496_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x3b}, /* long exposure[15:8] */
- {OV5693_8BIT, 0x3502, 0x80}, /* long exposure[7:0] */
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3800, 0x00}, /* TIMING_X_ADDR_START */
- {OV5693_8BIT, 0x3801, 0x02}, /* 2 */
- {OV5693_8BIT, 0x3802, 0x00}, /* TIMING_Y_ADDR_START */
- {OV5693_8BIT, 0x3803, 0x62}, /* 98 */
- {OV5693_8BIT, 0x3804, 0x0a}, /* TIMING_X_ADDR_END */
- {OV5693_8BIT, 0x3805, 0x3b}, /* 2619 */
- {OV5693_8BIT, 0x3806, 0x07}, /* TIMING_Y_ADDR_END */
- {OV5693_8BIT, 0x3807, 0x43}, /* 1859 */
- {OV5693_8BIT, 0x3808, 0x02}, /* TIMING_X_OUTPUT_SIZE */
- {OV5693_8BIT, 0x3809, 0xe0}, /* 736 */
- {OV5693_8BIT, 0x380a, 0x01}, /* TIMING_Y_OUTPUT_SIZE */
- {OV5693_8BIT, 0x380b, 0xf0}, /* 496 */
- {OV5693_8BIT, 0x380c, 0x0a}, /* TIMING_HTS */
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07}, /* TIMING_VTS */
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3810, 0x00}, /* TIMING_ISP_X_WIN */
- {OV5693_8BIT, 0x3811, 0x02}, /* 2 */
- {OV5693_8BIT, 0x3812, 0x00}, /* TIMING_ISP_Y_WIN */
- {OV5693_8BIT, 0x3813, 0x00}, /* 0 */
- {OV5693_8BIT, 0x3814, 0x11}, /* TIME_X_INC */
- {OV5693_8BIT, 0x3815, 0x11}, /* TIME_Y_INC */
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x5041, 0x84}, /* scale is auto enabled */
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-static struct ov5693_reg const ov5693_2576x1936_30fps[] = {
- {OV5693_8BIT, 0x3501, 0x7b},
- {OV5693_8BIT, 0x3502, 0x00},
- {OV5693_8BIT, 0x3708, 0xe2},
- {OV5693_8BIT, 0x3709, 0xc3},
- {OV5693_8BIT, 0x3803, 0x00},
- {OV5693_8BIT, 0x3806, 0x07},
- {OV5693_8BIT, 0x3807, 0xa3},
- {OV5693_8BIT, 0x3808, 0x0a},
- {OV5693_8BIT, 0x3809, 0x10},
- {OV5693_8BIT, 0x380a, 0x07},
- {OV5693_8BIT, 0x380b, 0x90},
- {OV5693_8BIT, 0x380c, 0x0a},
- {OV5693_8BIT, 0x380d, 0x80},
- {OV5693_8BIT, 0x380e, 0x07},
- {OV5693_8BIT, 0x380f, 0xc0},
- {OV5693_8BIT, 0x3811, 0x18},
- {OV5693_8BIT, 0x3813, 0x00},
- {OV5693_8BIT, 0x3814, 0x11},
- {OV5693_8BIT, 0x3815, 0x11},
- {OV5693_8BIT, 0x3820, 0x00},
- {OV5693_8BIT, 0x3821, 0x1e},
- {OV5693_8BIT, 0x5002, 0x00},
- {OV5693_8BIT, 0x0100, 0x01},
- {OV5693_TOK_TERM, 0, 0}
-};
-
-static struct ov5693_resolution ov5693_res_preview[] = {
- {
- .desc = "ov5693_736x496_30fps",
- .width = 736,
- .height = 496,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_736x496_30fps,
- },
- {
- .desc = "ov5693_1616x1216_30fps",
- .width = 1616,
- .height = 1216,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1616x1216_30fps,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2576,
- .height = 1456,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2576x1456_30fps,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2576,
- .height = 1936,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2576x1936_30fps,
- },
-};
-
-#define N_RES_PREVIEW (ARRAY_SIZE(ov5693_res_preview))
-
-/*
- * Disable non-preview configurations until the configuration selection is
- * improved.
- */
-#if ENABLE_NON_PREVIEW
-struct ov5693_resolution ov5693_res_still[] = {
- {
- .desc = "ov5693_736x496_30fps",
- .width = 736,
- .height = 496,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_736x496_30fps,
- },
- {
- .desc = "ov5693_1424x1168_30fps",
- .width = 1424,
- .height = 1168,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1424x1168_30fps,
- },
- {
- .desc = "ov5693_1616x1216_30fps",
- .width = 1616,
- .height = 1216,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1616x1216_30fps,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2592,
- .height = 1456,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2592x1456_30fps,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2592,
- .height = 1944,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2592x1944_30fps,
- },
-};
-
-#define N_RES_STILL (ARRAY_SIZE(ov5693_res_still))
-
-struct ov5693_resolution ov5693_res_video[] = {
- {
- .desc = "ov5693_736x496_30fps",
- .width = 736,
- .height = 496,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_736x496,
- },
- {
- .desc = "ov5693_336x256_30fps",
- .width = 336,
- .height = 256,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_336x256,
- },
- {
- .desc = "ov5693_368x304_30fps",
- .width = 368,
- .height = 304,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_368x304,
- },
- {
- .desc = "ov5693_192x160_30fps",
- .width = 192,
- .height = 160,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_192x160,
- },
- {
- .desc = "ov5693_1296x736_30fps",
- .width = 1296,
- .height = 736,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1296x736,
- },
- {
- .desc = "ov5693_1296x976_30fps",
- .width = 1296,
- .height = 976,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1296x976,
- },
- {
- .desc = "ov5693_1636P_30fps",
- .width = 1636,
- .height = 1096,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1636p_30fps,
- },
- {
- .desc = "ov5693_1080P_30fps",
- .width = 1940,
- .height = 1096,
- .fps = 30,
- .pix_clk_freq = 160,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_1940x1096,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2592,
- .height = 1456,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2592x1456_30fps,
- },
- {
- .desc = "ov5693_5M_30fps",
- .width = 2592,
- .height = 1944,
- .pix_clk_freq = 160,
- .fps = 30,
- .used = 0,
- .pixels_per_line = 2688,
- .lines_per_frame = 1984,
- .regs = ov5693_2592x1944_30fps,
- },
-};
-
-#define N_RES_VIDEO (ARRAY_SIZE(ov5693_res_video))
-#endif
-
-static struct ov5693_resolution *ov5693_res = ov5693_res_preview;
-static unsigned long N_RES = N_RES_PREVIEW;
-#endif
projects / linux-block.git / commitdiff