net: dsa: seville: remove unused defines for the mdio controller

Some definitions were likely copied from
drivers/net/mdio/mdio-mscc-miim.c.

They are not necessary, remove them.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 565ea1608d5e8e1ff4e56b407659fe9931f5f06c..a7e059b554d7a0229055e7b0a209260c70371083 100644 (file)
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -16,23 +16,12 @@
 #define VSC9953_VCAP_IS2_ENTRY_WIDTH           376
 #define VSC9953_VCAP_PORT_CNT                  10
 
-#define MSCC_MIIM_REG_STATUS                   0x0
-#define                MSCC_MIIM_STATUS_STAT_BUSY      BIT(3)
-#define MSCC_MIIM_REG_CMD                      0x8
 #define                MSCC_MIIM_CMD_OPR_WRITE         BIT(1)
 #define                MSCC_MIIM_CMD_OPR_READ          BIT(2)
 #define                MSCC_MIIM_CMD_WRDATA_SHIFT      4
 #define                MSCC_MIIM_CMD_REGAD_SHIFT       20
 #define                MSCC_MIIM_CMD_PHYAD_SHIFT       25
 #define                MSCC_MIIM_CMD_VLD               BIT(31)
-#define MSCC_MIIM_REG_DATA                     0xC
-#define                MSCC_MIIM_DATA_ERROR            (BIT(16) | BIT(17))
-
-#define MSCC_PHY_REG_PHY_CFG           0x0
-#define                PHY_CFG_PHY_ENA         (BIT(0) | BIT(1) | BIT(2) | BIT(3))
-#define                PHY_CFG_PHY_COMMON_RESET BIT(4)
-#define                PHY_CFG_PHY_RESET       (BIT(5) | BIT(6) | BIT(7) | BIT(8))
-#define MSCC_PHY_REG_PHY_STATUS                0x4
 
 static const u32 vsc9953_ana_regmap[] = {
        REG(ANA_ADVLEARN,                       0x00b500),