Thermal: int3406_thermal: fix thermal sysfs I/F
authorZhang Rui <rui.zhang@intel.com>
Thu, 20 Jul 2017 02:22:47 +0000 (10:22 +0800)
committerZhang Rui <rui.zhang@intel.com>
Fri, 1 Sep 2017 01:03:29 +0000 (09:03 +0800)
there are three concepts represent backlight in int3406_thermal driver.
1. the raw brightness value from native graphics driver.
2. the percentage numbers from ACPI _BCL control method.
3. the consecutive numbers represent cooling states.

int3406_thermal driver
1. uses value from DDDL/DDPC as the lower/upper limit, which is consistent
   with ACPI _BCL control methods.
2. reads current and maximum brightness from the native graphics driver.
3. expose them to thermal sysfs I/F

This patch fixes the code that switches between the raw brightness value
and the cooling state, which results in bogus value in thermal sysfs I/F.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
drivers/thermal/int340x_thermal/int3406_thermal.c

index 1891f34ab7fcd746405fb6f7b7696c36c54133f2..f69ab026ba243cbdbe3e12a385fe66503e4f7ff8 100644 (file)
 
 struct int3406_thermal_data {
        int upper_limit;
-       int upper_limit_index;
        int lower_limit;
-       int lower_limit_index;
        acpi_handle handle;
        struct acpi_video_device_brightness *br;
        struct backlight_device *raw_bd;
        struct thermal_cooling_device *cooling_dev;
 };
 
-static int int3406_thermal_to_raw(int level, struct int3406_thermal_data *d)
-{
-       int max_level = d->br->levels[d->br->count - 1];
-       int raw_max = d->raw_bd->props.max_brightness;
-
-       return level * raw_max / max_level;
-}
-
-static int int3406_thermal_to_acpi(int level, struct int3406_thermal_data *d)
-{
-       int raw_max = d->raw_bd->props.max_brightness;
-       int max_level = d->br->levels[d->br->count - 1];
-
-       return level * max_level / raw_max;
-}
+/*
+ * According to the ACPI spec,
+ * "Each brightness level is represented by a number between 0 and 100,
+ * and can be thought of as a percentage. For example, 50 can be 50%
+ * power consumption or 50% brightness, as defined by the OEM."
+ *
+ * As int3406 device uses this value to communicate with the native
+ * graphics driver, we make the assumption that it represents
+ * the percentage of brightness only
+ */
+#define ACPI_TO_RAW(v, d) (d->raw_bd->props.max_brightness * v / 100)
+#define RAW_TO_ACPI(v, d) (v * 100 / d->raw_bd->props.max_brightness)
 
 static int
 int3406_thermal_get_max_state(struct thermal_cooling_device *cooling_dev,
                              unsigned long *state)
 {
        struct int3406_thermal_data *d = cooling_dev->devdata;
-       int index = d->lower_limit_index ? d->lower_limit_index : 2;
 
-       *state = d->br->count - 1 - index;
+       *state = d->upper_limit - d->lower_limit;
        return 0;
 }
 
@@ -62,19 +56,15 @@ int3406_thermal_set_cur_state(struct thermal_cooling_device *cooling_dev,
                              unsigned long state)
 {
        struct int3406_thermal_data *d = cooling_dev->devdata;
-       int level, raw_level;
+       int acpi_level, raw_level;
 
-       if (state > d->br->count - 3)
+       if (state > d->upper_limit - d->lower_limit)
                return -EINVAL;
 
-       state = d->br->count - 1 - state;
-       level = d->br->levels[state];
+       acpi_level = d->br->levels[d->upper_limit - state];
 
-       if ((d->upper_limit && level > d->upper_limit) ||
-           (d->lower_limit && level < d->lower_limit))
-               return -EINVAL;
+       raw_level = ACPI_TO_RAW(acpi_level, d);
 
-       raw_level = int3406_thermal_to_raw(level, d);
        return backlight_device_set_brightness(d->raw_bd, raw_level);
 }
 
@@ -83,27 +73,22 @@ int3406_thermal_get_cur_state(struct thermal_cooling_device *cooling_dev,
                              unsigned long *state)
 {
        struct int3406_thermal_data *d = cooling_dev->devdata;
-       int raw_level, level, i;
-       int *levels = d->br->levels;
+       int acpi_level;
+       int index;
 
-       raw_level = d->raw_bd->props.brightness;
-       level = int3406_thermal_to_acpi(raw_level, d);
+       acpi_level = RAW_TO_ACPI(d->raw_bd->props.brightness, d);
 
        /*
-        * There is no 1:1 mapping between the firmware interface level with the
-        * raw interface level, we will have to find one that is close enough.
+        * There is no 1:1 mapping between the firmware interface level
+        * with the raw interface level, we will have to find one that is
+        * right above it.
         */
-       for (i = 2; i < d->br->count; i++) {
-               if (level < levels[i]) {
-                       if (i == 2)
-                               break;
-                       if ((level - levels[i - 1]) < (levels[i] - level))
-                               i--;
+       for (index = d->lower_limit; index < d->upper_limit; index++) {
+               if (acpi_level <= d->br->levels[index])
                        break;
-               }
        }
 
-       *state = d->br->count - 1 - i;
+       *state = d->upper_limit - index;
        return 0;
 }
 
@@ -117,7 +102,7 @@ static int int3406_thermal_get_index(int *array, int nr, int value)
 {
        int i;
 
-       for (i = 0; i < nr; i++) {
+       for (i = 2; i < nr; i++) {
                if (array[i] == value)
                        break;
        }
@@ -128,27 +113,20 @@ static void int3406_thermal_get_limit(struct int3406_thermal_data *d)
 {
        acpi_status status;
        unsigned long long lower_limit, upper_limit;
-       int index;
 
        status = acpi_evaluate_integer(d->handle, "DDDL", NULL, &lower_limit);
-       if (ACPI_SUCCESS(status)) {
-               index = int3406_thermal_get_index(d->br->levels, d->br->count,
-                                                 lower_limit);
-               if (index > 0) {
-                       d->lower_limit = (int)lower_limit;
-                       d->lower_limit_index = index;
-               }
-       }
+       if (ACPI_SUCCESS(status))
+               d->lower_limit = int3406_thermal_get_index(d->br->levels,
+                                       d->br->count, lower_limit);
 
        status = acpi_evaluate_integer(d->handle, "DDPC", NULL, &upper_limit);
-       if (ACPI_SUCCESS(status)) {
-               index = int3406_thermal_get_index(d->br->levels, d->br->count,
-                                                 upper_limit);
-               if (index > 0) {
-                       d->upper_limit = (int)upper_limit;
-                       d->upper_limit_index = index;
-               }
-       }
+       if (ACPI_SUCCESS(status))
+               d->upper_limit = int3406_thermal_get_index(d->br->levels,
+                                       d->br->count, upper_limit);
+
+       /* lower_limit and upper_limit should be always set */
+       d->lower_limit = d->lower_limit > 0 ? d->lower_limit : 2;
+       d->upper_limit = d->upper_limit > 0 ? d->upper_limit : d->br->count - 1;
 }
 
 static void int3406_notify(acpi_handle handle, u32 event, void *data)